1 files changed, 234 insertions, 67 deletions

diff --git a/drivers/video/da8xx-fb.c b/drivers/video/da8xx-fb.c
index 8d244ba0f60..cad7d45c8ba 100644
--- a/drivers/video/da8xx-fb.c
+++ b/drivers/video/da8xx-fb.c
@@ -36,7 +36,9 @@
 #define DRIVER_NAME "da8xx_lcdc"
 
 /* LCD Status Register */
+#define LCD_END_OF_FRAME1		BIT(9)
 #define LCD_END_OF_FRAME0		BIT(8)
+#define LCD_PL_LOAD_DONE		BIT(6)
 #define LCD_FIFO_UNDERFLOW		BIT(5)
 #define LCD_SYNC_LOST			BIT(2)
 
@@ -58,11 +60,13 @@
 #define LCD_PALETTE_LOAD_MODE(x)	((x) << 20)
 #define PALETTE_AND_DATA		0x00
 #define PALETTE_ONLY			0x01
+#define DATA_ONLY			0x02
 
 #define LCD_MONO_8BIT_MODE		BIT(9)
 #define LCD_RASTER_ORDER		BIT(8)
 #define LCD_TFT_MODE			BIT(7)
 #define LCD_UNDERFLOW_INT_ENA		BIT(6)
+#define LCD_PL_ENABLE			BIT(4)
 #define LCD_MONOCHROME_MODE		BIT(1)
 #define LCD_RASTER_ENABLE		BIT(0)
 #define LCD_TFT_ALT_ENABLE		BIT(23)
@@ -87,6 +91,10 @@
 #define  LCD_DMA_CTRL_REG			0x40
 #define  LCD_DMA_FRM_BUF_BASE_ADDR_0_REG	0x44
 #define  LCD_DMA_FRM_BUF_CEILING_ADDR_0_REG	0x48
+#define  LCD_DMA_FRM_BUF_BASE_ADDR_1_REG	0x4C
+#define  LCD_DMA_FRM_BUF_CEILING_ADDR_1_REG	0x50
+
+#define LCD_NUM_BUFFERS	2
 
 #define WSI_TIMEOUT	50
 #define PALETTE_SIZE	256
@@ -111,13 +119,20 @@ static inline void lcdc_write(unsigned int val, unsigned int addr)
 struct da8xx_fb_par {
 	resource_size_t p_palette_base;
 	unsigned char *v_palette_base;
+	dma_addr_t		vram_phys;
+	unsigned long		vram_size;
+	void			*vram_virt;
+	unsigned int		dma_start;
+	unsigned int		dma_end;
 	struct clk *lcdc_clk;
 	int irq;
 	unsigned short pseudo_palette[16];
-	unsigned int databuf_sz;
 	unsigned int palette_sz;
 	unsigned int pxl_clk;
 	int blank;
+	wait_queue_head_t	vsync_wait;
+	int			vsync_flag;
+	int			vsync_timeout;
 #ifdef CONFIG_CPU_FREQ
 	struct notifier_block	freq_transition;
 #endif
@@ -148,9 +163,9 @@ static struct fb_fix_screeninfo da8xx_fb_fix __devinitdata = {
 	.type = FB_TYPE_PACKED_PIXELS,
 	.type_aux = 0,
 	.visual = FB_VISUAL_PSEUDOCOLOR,
-	.xpanstep = 1,
+	.xpanstep = 0,
 	.ypanstep = 1,
-	.ywrapstep = 1,
+	.ywrapstep = 0,
 	.accel = FB_ACCEL_NONE
 };
 
@@ -221,22 +236,48 @@ static inline void lcd_disable_raster(void)
 
 static void lcd_blit(int load_mode, struct da8xx_fb_par *par)
 {
-	u32 tmp = par->p_palette_base + par->databuf_sz - 4;
-	u32 reg;
+	u32 start;
+	u32 end;
+	u32 reg_ras;
+	u32 reg_dma;
+
+	/* init reg to clear PLM (loading mode) fields */
+	reg_ras = lcdc_read(LCD_RASTER_CTRL_REG);
+	reg_ras &= ~(3 << 20);
+
+	reg_dma  = lcdc_read(LCD_DMA_CTRL_REG);
+
+	if (load_mode == LOAD_DATA) {
+		start    = par->dma_start;
+		end      = par->dma_end;
+
+		reg_ras |= LCD_PALETTE_LOAD_MODE(DATA_ONLY);
+		reg_dma |= LCD_END_OF_FRAME_INT_ENA;
+		reg_dma |= LCD_DUAL_FRAME_BUFFER_ENABLE;
+
+		lcdc_write(start, LCD_DMA_FRM_BUF_BASE_ADDR_0_REG);
+		lcdc_write(end, LCD_DMA_FRM_BUF_CEILING_ADDR_0_REG);
+		lcdc_write(start, LCD_DMA_FRM_BUF_BASE_ADDR_1_REG);
+		lcdc_write(end, LCD_DMA_FRM_BUF_CEILING_ADDR_1_REG);
+	} else if (load_mode == LOAD_PALETTE) {
+		start    = par->p_palette_base;
+		end      = start + par->palette_sz - 1;
+
+		reg_ras |= LCD_PALETTE_LOAD_MODE(PALETTE_ONLY);
+		reg_ras |= LCD_PL_ENABLE;
+
+		lcdc_write(start, LCD_DMA_FRM_BUF_BASE_ADDR_0_REG);
+		lcdc_write(end, LCD_DMA_FRM_BUF_CEILING_ADDR_0_REG);
+	}
 
-	/* Update the databuf in the hw. */
-	lcdc_write(par->p_palette_base, LCD_DMA_FRM_BUF_BASE_ADDR_0_REG);
-	lcdc_write(tmp, LCD_DMA_FRM_BUF_CEILING_ADDR_0_REG);
+	lcdc_write(reg_dma, LCD_DMA_CTRL_REG);
+	lcdc_write(reg_ras, LCD_RASTER_CTRL_REG);
 
-	/* Start the DMA. */
-	reg = lcdc_read(LCD_RASTER_CTRL_REG);
-	reg &= ~(3 << 20);
-	if (load_mode == LOAD_DATA)
-		reg |= LCD_PALETTE_LOAD_MODE(PALETTE_AND_DATA);
-	else if (load_mode == LOAD_PALETTE)
-		reg |= LCD_PALETTE_LOAD_MODE(PALETTE_ONLY);
-
-	lcdc_write(reg, LCD_RASTER_CTRL_REG);
+	/*
+	 * The Raster enable bit must be set after all other control fields are
+	 * set.
+	 */
+	lcd_enable_raster();
 }
 
 /* Configure the Burst Size of DMA */
@@ -368,12 +409,8 @@ static int lcd_cfg_display(const struct lcd_ctrl_config *cfg)
 static int lcd_cfg_frame_buffer(struct da8xx_fb_par *par, u32 width, u32 height,
 		u32 bpp, u32 raster_order)
 {
-	u32 bpl, reg;
+	u32 reg;
 
-	/* Disable Dual Frame Buffer. */
-	reg = lcdc_read(LCD_DMA_CTRL_REG);
-	lcdc_write(reg & ~LCD_DUAL_FRAME_BUFFER_ENABLE,
-						LCD_DMA_CTRL_REG);
 	/* Set the Panel Width */
 	/* Pixels per line = (PPL + 1)*16 */
 	/*0x3F in bits 4..9 gives max horisontal resolution = 1024 pixels*/
@@ -410,9 +447,6 @@ static int lcd_cfg_frame_buffer(struct da8xx_fb_par *par, u32 width, u32 height,
 		return -EINVAL;
 	}
 
-	bpl = width * bpp / 8;
-	par->databuf_sz = height * bpl + par->palette_sz;
-
 	return 0;
 }
 
@@ -421,8 +455,9 @@ static int fb_setcolreg(unsigned regno, unsigned red, unsigned green,
 			      struct fb_info *info)
 {
 	struct da8xx_fb_par *par = info->par;
-	unsigned short *palette = (unsigned short *)par->v_palette_base;
+	unsigned short *palette = (unsigned short *) par->v_palette_base;
 	u_short pal;
+	int update_hw = 0;
 
 	if (regno > 255)
 		return 1;
@@ -439,8 +474,10 @@ static int fb_setcolreg(unsigned regno, unsigned red, unsigned green,
 		pal |= (green & 0x00f0);
 		pal |= (blue & 0x000f);
 
-		palette[regno] = pal;
-
+		if (palette[regno] != pal) {
+			update_hw = 1;
+			palette[regno] = pal;
+		}
 	} else if ((info->var.bits_per_pixel == 16) && regno < 16) {
 		red >>= (16 - info->var.red.length);
 		red <<= info->var.red.offset;
@@ -453,9 +490,16 @@ static int fb_setcolreg(unsigned regno, unsigned red, unsigned green,
 
 		par->pseudo_palette[regno] = red | green | blue;
 
-		palette[0] = 0x4000;
+		if (palette[0] != 0x4000) {
+			update_hw = 1;
+			palette[0] = 0x4000;
+		}
 	}
 
+	/* Update the palette in the h/w as needed. */
+	if (update_hw)
+		lcd_blit(LOAD_PALETTE, par);
+
 	return 0;
 }
 
@@ -541,15 +585,54 @@ static int lcd_init(struct da8xx_fb_par *par, const struct lcd_ctrl_config *cfg,
 
 static irqreturn_t lcdc_irq_handler(int irq, void *arg)
 {
+	struct da8xx_fb_par *par = arg;
 	u32 stat = lcdc_read(LCD_STAT_REG);
+	u32 reg_ras;
 
 	if ((stat & LCD_SYNC_LOST) && (stat & LCD_FIFO_UNDERFLOW)) {
 		lcd_disable_raster();
 		lcdc_write(stat, LCD_STAT_REG);
 		lcd_enable_raster();
-	} else
+	} else if (stat & LCD_PL_LOAD_DONE) {
+		/*
+		 * Must disable raster before changing state of any control bit.
+		 * And also must be disabled before clearing the PL loading
+		 * interrupt via the following write to the status register. If
+		 * this is done after then one gets multiple PL done interrupts.
+		 */
+		lcd_disable_raster();
+
 		lcdc_write(stat, LCD_STAT_REG);
 
+		/* Disable PL completion inerrupt */
+		reg_ras  = lcdc_read(LCD_RASTER_CTRL_REG);
+		reg_ras &= ~LCD_PL_ENABLE;
+		lcdc_write(reg_ras, LCD_RASTER_CTRL_REG);
+
+		/* Setup and start data loading mode */
+		lcd_blit(LOAD_DATA, par);
+	} else {
+		lcdc_write(stat, LCD_STAT_REG);
+
+		if (stat & LCD_END_OF_FRAME0) {
+			lcdc_write(par->dma_start,
+				   LCD_DMA_FRM_BUF_BASE_ADDR_0_REG);
+			lcdc_write(par->dma_end,
+				   LCD_DMA_FRM_BUF_CEILING_ADDR_0_REG);
+			par->vsync_flag = 1;
+			wake_up_interruptible(&par->vsync_wait);
+		}
+
+		if (stat & LCD_END_OF_FRAME1) {
+			lcdc_write(par->dma_start,
+				   LCD_DMA_FRM_BUF_BASE_ADDR_1_REG);
+			lcdc_write(par->dma_end,
+				   LCD_DMA_FRM_BUF_CEILING_ADDR_1_REG);
+			par->vsync_flag = 1;
+			wake_up_interruptible(&par->vsync_wait);
+		}
+	}
+
 	return IRQ_HANDLED;
 }
 
@@ -654,9 +737,10 @@ static int __devexit fb_remove(struct platform_device *dev)
 
 		unregister_framebuffer(info);
 		fb_dealloc_cmap(&info->cmap);
-		dma_free_coherent(NULL, par->databuf_sz + PAGE_SIZE,
-					info->screen_base - PAGE_SIZE,
-					info->fix.smem_start);
+		dma_free_coherent(NULL, PALETTE_SIZE, par->v_palette_base,
+				  par->p_palette_base);
+		dma_free_coherent(NULL, par->vram_size, par->vram_virt,
+				  par->vram_phys);
 		free_irq(par->irq, par);
 		clk_disable(par->lcdc_clk);
 		clk_put(par->lcdc_clk);
@@ -668,6 +752,39 @@ static int __devexit fb_remove(struct platform_device *dev)
 	return 0;
 }
 
+/*
+ * Function to wait for vertical sync which for this LCD peripheral
+ * translates into waiting for the current raster frame to complete.
+ */
+static int fb_wait_for_vsync(struct fb_info *info)
+{
+	struct da8xx_fb_par *par = info->par;
+	int ret;
+
+	/*
+	 * Set flag to 0 and wait for isr to set to 1. It would seem there is a
+	 * race condition here where the ISR could have occured just before or
+	 * just after this set. But since we are just coarsely waiting for
+	 * a frame to complete then that's OK. i.e. if the frame completed
+	 * just before this code executed then we have to wait another full
+	 * frame time but there is no way to avoid such a situation. On the
+	 * other hand if the frame completed just after then we don't need
+	 * to wait long at all. Either way we are guaranteed to return to the
+	 * user immediately after a frame completion which is all that is
+	 * required.
+	 */
+	par->vsync_flag = 0;
+	ret = wait_event_interruptible_timeout(par->vsync_wait,
+					       par->vsync_flag != 0,
+					       par->vsync_timeout);
+	if (ret < 0)
+		return ret;
+	if (ret == 0)
+		return -ETIMEDOUT;
+
+	return 0;
+}
+
 static int fb_ioctl(struct fb_info *info, unsigned int cmd,
 			  unsigned long arg)
 {
@@ -697,6 +814,8 @@ static int fb_ioctl(struct fb_info *info, unsigned int cmd,
 					sync_arg.pulse_width,
 					sync_arg.front_porch);
 		break;
+	case FBIO_WAITFORVSYNC:
+		return fb_wait_for_vsync(info);
 	default:
 		return -EINVAL;
 	}
@@ -732,10 +851,47 @@ static int cfb_blank(int blank, struct fb_info *info)
 	return ret;
 }
 
+/*
+ * Set new x,y offsets in the virtual display for the visible area and switch
+ * to the new mode.
+ */
+static int da8xx_pan_display(struct fb_var_screeninfo *var,
+			     struct fb_info *fbi)
+{
+	int ret = 0;
+	struct fb_var_screeninfo new_var;
+	struct da8xx_fb_par         *par = fbi->par;
+	struct fb_fix_screeninfo    *fix = &fbi->fix;
+	unsigned int end;
+	unsigned int start;
+
+	if (var->xoffset != fbi->var.xoffset ||
+			var->yoffset != fbi->var.yoffset) {
+		memcpy(&new_var, &fbi->var, sizeof(new_var));
+		new_var.xoffset = var->xoffset;
+		new_var.yoffset = var->yoffset;
+		if (fb_check_var(&new_var, fbi))
+			ret = -EINVAL;
+		else {
+			memcpy(&fbi->var, &new_var, sizeof(new_var));
+
+			start	= fix->smem_start +
+				new_var.yoffset * fix->line_length +
+				new_var.xoffset * var->bits_per_pixel / 8;
+			end	= start + var->yres * fix->line_length - 1;
+			par->dma_start	= start;
+			par->dma_end	= end;
+		}
+	}
+
+	return ret;
+}
+
 static struct fb_ops da8xx_fb_ops = {
 	.owner = THIS_MODULE,
 	.fb_check_var = fb_check_var,
 	.fb_setcolreg = fb_setcolreg,
+	.fb_pan_display = da8xx_pan_display,
 	.fb_ioctl = fb_ioctl,
 	.fb_fillrect = cfb_fillrect,
 	.fb_copyarea = cfb_copyarea,
@@ -829,40 +985,53 @@ static int __init fb_probe(struct platform_device *device)
 	}
 
 	/* allocate frame buffer */
-	da8xx_fb_info->screen_base = dma_alloc_coherent(NULL,
-					par->databuf_sz + PAGE_SIZE,
-					(resource_size_t *)
-					&da8xx_fb_info->fix.smem_start,
-					GFP_KERNEL | GFP_DMA);
-
-	if (!da8xx_fb_info->screen_base) {
+	par->vram_size = lcdc_info->width * lcdc_info->height * lcd_cfg->bpp;
+	par->vram_size = PAGE_ALIGN(par->vram_size/8);
+	par->vram_size = par->vram_size * LCD_NUM_BUFFERS;
+
+	par->vram_virt = dma_alloc_coherent(NULL,
+					    par->vram_size,
+					    (resource_size_t *) &par->vram_phys,
+					    GFP_KERNEL | GFP_DMA);
+	if (!par->vram_virt) {
 		dev_err(&device->dev,
 			"GLCD: kmalloc for frame buffer failed\n");
 		ret = -EINVAL;
 		goto err_release_fb;
 	}
 
-	/* move palette base pointer by (PAGE_SIZE - palette_sz) bytes */
-	par->v_palette_base = da8xx_fb_info->screen_base +
-				(PAGE_SIZE - par->palette_sz);
-	par->p_palette_base = da8xx_fb_info->fix.smem_start +
-				(PAGE_SIZE - par->palette_sz);
-
-	/* the rest of the frame buffer is pixel data */
-	da8xx_fb_info->screen_base = par->v_palette_base + par->palette_sz;
-	da8xx_fb_fix.smem_start = par->p_palette_base + par->palette_sz;
-	da8xx_fb_fix.smem_len = par->databuf_sz - par->palette_sz;
-	da8xx_fb_fix.line_length = (lcdc_info->width * lcd_cfg->bpp) / 8;
+	da8xx_fb_info->screen_base = (char __iomem *) par->vram_virt;
+	da8xx_fb_fix.smem_start    = par->vram_phys;
+	da8xx_fb_fix.smem_len      = par->vram_size;
+	da8xx_fb_fix.line_length   = (lcdc_info->width * lcd_cfg->bpp) / 8;
+
+	par->dma_start = par->vram_phys;
+	par->dma_end   = par->dma_start + lcdc_info->height *
+		da8xx_fb_fix.line_length - 1;
+
+	/* allocate palette buffer */
+	par->v_palette_base = dma_alloc_coherent(NULL,
+					       PALETTE_SIZE,
+					       (resource_size_t *)
+					       &par->p_palette_base,
+					       GFP_KERNEL | GFP_DMA);
+	if (!par->v_palette_base) {
+		dev_err(&device->dev,
+			"GLCD: kmalloc for palette buffer failed\n");
+		ret = -EINVAL;
+		goto err_release_fb_mem;
+	}
+	memset(par->v_palette_base, 0, PALETTE_SIZE);
 
 	par->irq = platform_get_irq(device, 0);
 	if (par->irq < 0) {
 		ret = -ENOENT;
-		goto err_release_fb_mem;
+		goto err_release_pl_mem;
 	}
 
 	ret = request_irq(par->irq, lcdc_irq_handler, 0, DRIVER_NAME, par);
 	if (ret)
-		goto err_release_fb_mem;
+		goto err_release_pl_mem;
 
 	/* Initialize par */
 	da8xx_fb_info->var.bits_per_pixel = lcd_cfg->bpp;
@@ -870,8 +1039,8 @@ static int __init fb_probe(struct platform_device *device)
 	da8xx_fb_var.xres = lcdc_info->width;
 	da8xx_fb_var.xres_virtual = lcdc_info->width;
 
-	da8xx_fb_var.yres = lcdc_info->height;
-	da8xx_fb_var.yres_virtual = lcdc_info->height;
+	da8xx_fb_var.yres         = lcdc_info->height;
+	da8xx_fb_var.yres_virtual = lcdc_info->height * LCD_NUM_BUFFERS;
 
 	da8xx_fb_var.grayscale =
 	    lcd_cfg->p_disp_panel->panel_shade == MONOCHROME ? 1 : 0;
@@ -892,18 +1061,18 @@ static int __init fb_probe(struct platform_device *device)
 	ret = fb_alloc_cmap(&da8xx_fb_info->cmap, PALETTE_SIZE, 0);
 	if (ret)
 		goto err_free_irq;
-
-	/* First palette_sz byte of the frame buffer is the palette */
 	da8xx_fb_info->cmap.len = par->palette_sz;
 
-	/* Flush the buffer to the screen. */
-	lcd_blit(LOAD_DATA, par);
-
 	/* initialize var_screeninfo */
 	da8xx_fb_var.activate = FB_ACTIVATE_FORCE;
 	fb_set_var(da8xx_fb_info, &da8xx_fb_var);
 
 	dev_set_drvdata(&device->dev, da8xx_fb_info);
+
+	/* initialize the vsync wait queue */
+	init_waitqueue_head(&par->vsync_wait);
+	par->vsync_timeout = HZ / 5;
+
 	/* Register the Frame Buffer  */
 	if (register_framebuffer(da8xx_fb_info) < 0) {
 		dev_err(&device->dev,
@@ -919,10 +1088,6 @@ static int __init fb_probe(struct platform_device *device)
 		goto err_cpu_freq;
 	}
 #endif
-
-	/* enable raster engine */
-	lcd_enable_raster();
-
 	return 0;
 
 #ifdef CONFIG_CPU_FREQ
@@ -936,10 +1101,12 @@ err_dealloc_cmap:
 err_free_irq:
 	free_irq(par->irq, par);
 
+err_release_pl_mem:
+	dma_free_coherent(NULL, PALETTE_SIZE, par->v_palette_base,
+			  par->p_palette_base);
+
 err_release_fb_mem:
-	dma_free_coherent(NULL, par->databuf_sz + PAGE_SIZE,
-				da8xx_fb_info->screen_base - PAGE_SIZE,
-				da8xx_fb_info->fix.smem_start);
+	dma_free_coherent(NULL, par->vram_size, par->vram_virt, par->vram_phys);
 
 err_release_fb:
 	framebuffer_release(da8xx_fb_info);