diff options
Diffstat (limited to 'drivers/video/geode/video_cs5530.c')
| -rw-r--r-- | drivers/video/geode/video_cs5530.c | 195 |
1 files changed, 195 insertions, 0 deletions
diff --git a/drivers/video/geode/video_cs5530.c b/drivers/video/geode/video_cs5530.c new file mode 100644 index 00000000000..d3764acf844 --- /dev/null +++ b/drivers/video/geode/video_cs5530.c @@ -0,0 +1,195 @@ +/* + * drivers/video/geode/video_cs5530.c + * -- CS5530 video device + * + * Copyright (C) 2005 Arcom Control Systems Ltd. + * + * Based on AMD's original 2.4 driver: + * Copyright (C) 2004 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#include <linux/fb.h> +#include <linux/delay.h> +#include <asm/io.h> +#include <asm/delay.h> + +#include "geodefb.h" +#include "video_cs5530.h" + +/* + * CS5530 PLL table. This maps pixclocks to the appropriate PLL register + * value. + */ +struct cs5530_pll_entry { + long pixclock; /* ps */ + u32 pll_value; +}; + +static const struct cs5530_pll_entry cs5530_pll_table[] = { + { 39721, 0x31C45801, }, /* 25.1750 MHz */ + { 35308, 0x20E36802, }, /* 28.3220 */ + { 31746, 0x33915801, }, /* 31.5000 */ + { 27777, 0x31EC4801, }, /* 36.0000 */ + { 26666, 0x21E22801, }, /* 37.5000 */ + { 25000, 0x33088801, }, /* 40.0000 */ + { 22271, 0x33E22801, }, /* 44.9000 */ + { 20202, 0x336C4801, }, /* 49.5000 */ + { 20000, 0x23088801, }, /* 50.0000 */ + { 19860, 0x23088801, }, /* 50.3500 */ + { 18518, 0x3708A801, }, /* 54.0000 */ + { 17777, 0x23E36802, }, /* 56.2500 */ + { 17733, 0x23E36802, }, /* 56.3916 */ + { 17653, 0x23E36802, }, /* 56.6444 */ + { 16949, 0x37C45801, }, /* 59.0000 */ + { 15873, 0x23EC4801, }, /* 63.0000 */ + { 15384, 0x37911801, }, /* 65.0000 */ + { 14814, 0x37963803, }, /* 67.5000 */ + { 14124, 0x37058803, }, /* 70.8000 */ + { 13888, 0x3710C805, }, /* 72.0000 */ + { 13333, 0x37E22801, }, /* 75.0000 */ + { 12698, 0x27915801, }, /* 78.7500 */ + { 12500, 0x37D8D802, }, /* 80.0000 */ + { 11135, 0x27588802, }, /* 89.8000 */ + { 10582, 0x27EC4802, }, /* 94.5000 */ + { 10101, 0x27AC6803, }, /* 99.0000 */ + { 10000, 0x27088801, }, /* 100.0000 */ + { 9259, 0x2710C805, }, /* 108.0000 */ + { 8888, 0x27E36802, }, /* 112.5000 */ + { 7692, 0x27C58803, }, /* 130.0000 */ + { 7407, 0x27316803, }, /* 135.0000 */ + { 6349, 0x2F915801, }, /* 157.5000 */ + { 6172, 0x2F08A801, }, /* 162.0000 */ + { 5714, 0x2FB11802, }, /* 175.0000 */ + { 5291, 0x2FEC4802, }, /* 189.0000 */ + { 4950, 0x2F963803, }, /* 202.0000 */ + { 4310, 0x2FB1B802, }, /* 232.0000 */ +}; + +#define NUM_CS5530_FREQUENCIES sizeof(cs5530_pll_table)/sizeof(struct cs5530_pll_entry) + +static void cs5530_set_dclk_frequency(struct fb_info *info) +{ + struct geodefb_par *par = info->par; + int i; + u32 value; + long min, diff; + + /* Search the table for the closest pixclock. */ + value = cs5530_pll_table[0].pll_value; + min = cs5530_pll_table[0].pixclock - info->var.pixclock; + if (min < 0) min = -min; + for (i = 1; i < NUM_CS5530_FREQUENCIES; i++) { + diff = cs5530_pll_table[i].pixclock - info->var.pixclock; + if (diff < 0L) diff = -diff; + if (diff < min) { + min = diff; + value = cs5530_pll_table[i].pll_value; + } + } + + writel(value, par->vid_regs + CS5530_DOT_CLK_CONFIG); + writel(value | 0x80000100, par->vid_regs + CS5530_DOT_CLK_CONFIG); /* set reset and bypass */ + udelay(500); /* wait for PLL to settle */ + writel(value & 0x7FFFFFFF, par->vid_regs + CS5530_DOT_CLK_CONFIG); /* clear reset */ + writel(value & 0x7FFFFEFF, par->vid_regs + CS5530_DOT_CLK_CONFIG); /* clear bypass */ +} + +static void cs5530_configure_display(struct fb_info *info) +{ + struct geodefb_par *par = info->par; + u32 dcfg; + + dcfg = readl(par->vid_regs + CS5530_DISPLAY_CONFIG); + + /* Clear bits from existing mode. */ + dcfg &= ~(CS5530_DCFG_CRT_SYNC_SKW_MASK | CS5530_DCFG_PWR_SEQ_DLY_MASK + | CS5530_DCFG_CRT_HSYNC_POL | CS5530_DCFG_CRT_VSYNC_POL + | CS5530_DCFG_FP_PWR_EN | CS5530_DCFG_FP_DATA_EN + | CS5530_DCFG_DAC_PWR_EN | CS5530_DCFG_VSYNC_EN + | CS5530_DCFG_HSYNC_EN); + + /* Set default sync skew and power sequence delays. */ + dcfg |= (CS5530_DCFG_CRT_SYNC_SKW_INIT | CS5530_DCFG_PWR_SEQ_DLY_INIT + | CS5530_DCFG_GV_PAL_BYP); + + /* Enable DACs, hsync and vsync for CRTs */ + if (par->enable_crt) { + dcfg |= CS5530_DCFG_DAC_PWR_EN; + dcfg |= CS5530_DCFG_HSYNC_EN | CS5530_DCFG_VSYNC_EN; + } + /* Enable panel power and data if using a flat panel. */ + if (par->panel_x > 0) { + dcfg |= CS5530_DCFG_FP_PWR_EN; + dcfg |= CS5530_DCFG_FP_DATA_EN; + } + + /* Sync polarities. */ + if (info->var.sync & FB_SYNC_HOR_HIGH_ACT) + dcfg |= CS5530_DCFG_CRT_HSYNC_POL; + if (info->var.sync & FB_SYNC_VERT_HIGH_ACT) + dcfg |= CS5530_DCFG_CRT_VSYNC_POL; + + writel(dcfg, par->vid_regs + CS5530_DISPLAY_CONFIG); +} + +static int cs5530_blank_display(struct fb_info *info, int blank_mode) +{ + struct geodefb_par *par = info->par; + u32 dcfg; + int blank, hsync, vsync; + + switch (blank_mode) { + case FB_BLANK_UNBLANK: + blank = 0; hsync = 1; vsync = 1; + break; + case FB_BLANK_NORMAL: + blank = 1; hsync = 1; vsync = 1; + break; + case FB_BLANK_VSYNC_SUSPEND: + blank = 1; hsync = 1; vsync = 0; + break; + case FB_BLANK_HSYNC_SUSPEND: + blank = 1; hsync = 0; vsync = 1; + break; + case FB_BLANK_POWERDOWN: + blank = 1; hsync = 0; vsync = 0; + break; + default: + return -EINVAL; + } + + dcfg = readl(par->vid_regs + CS5530_DISPLAY_CONFIG); + + dcfg &= ~(CS5530_DCFG_DAC_BL_EN | CS5530_DCFG_DAC_PWR_EN + | CS5530_DCFG_HSYNC_EN | CS5530_DCFG_VSYNC_EN + | CS5530_DCFG_FP_DATA_EN | CS5530_DCFG_FP_PWR_EN); + + if (par->enable_crt) { + if (!blank) + dcfg |= CS5530_DCFG_DAC_BL_EN | CS5530_DCFG_DAC_PWR_EN; + if (hsync) + dcfg |= CS5530_DCFG_HSYNC_EN; + if (vsync) + dcfg |= CS5530_DCFG_VSYNC_EN; + } + if (par->panel_x > 0) { + if (!blank) + dcfg |= CS5530_DCFG_FP_DATA_EN; + if (hsync && vsync) + dcfg |= CS5530_DCFG_FP_PWR_EN; + } + + writel(dcfg, par->vid_regs + CS5530_DISPLAY_CONFIG); + + return 0; +} + +struct geode_vid_ops cs5530_vid_ops = { + .set_dclk = cs5530_set_dclk_frequency, + .configure_display = cs5530_configure_display, + .blank_display = cs5530_blank_display, +}; |