diff options
Diffstat (limited to 'drivers/video/geode/video_gx.c')
-rw-r--r-- | drivers/video/geode/video_gx.c | 107 |
1 files changed, 96 insertions, 11 deletions
diff --git a/drivers/video/geode/video_gx.c b/drivers/video/geode/video_gx.c index 2b2a7880ea7..7f3f18d0671 100644 --- a/drivers/video/geode/video_gx.c +++ b/drivers/video/geode/video_gx.c @@ -175,13 +175,88 @@ static void gx_set_dclk_frequency(struct fb_info *info) } while (timeout-- && !(dotpll & MSR_GLCP_DOTPLL_LOCK)); } +static void +gx_configure_tft(struct fb_info *info) +{ + struct geodefb_par *par = info->par; + unsigned long val; + unsigned long fp; + + /* Set up the DF pad select MSR */ + + rdmsrl(GX_VP_MSR_PAD_SELECT, val); + val &= ~GX_VP_PAD_SELECT_MASK; + val |= GX_VP_PAD_SELECT_TFT; + wrmsrl(GX_VP_MSR_PAD_SELECT, val); + + /* Turn off the panel */ + + fp = readl(par->vid_regs + GX_FP_PM); + fp &= ~GX_FP_PM_P; + writel(fp, par->vid_regs + GX_FP_PM); + + /* Set timing 1 */ + + fp = readl(par->vid_regs + GX_FP_PT1); + fp &= GX_FP_PT1_VSIZE_MASK; + fp |= info->var.yres << GX_FP_PT1_VSIZE_SHIFT; + writel(fp, par->vid_regs + GX_FP_PT1); + + /* Timing 2 */ + /* Set bits that are always on for TFT */ + + fp = 0x0F100000; + + /* Add sync polarity */ + + if (!(info->var.sync & FB_SYNC_VERT_HIGH_ACT)) + fp |= GX_FP_PT2_VSP; + + if (!(info->var.sync & FB_SYNC_HOR_HIGH_ACT)) + fp |= GX_FP_PT2_HSP; + + writel(fp, par->vid_regs + GX_FP_PT2); + + /* Set the dither control */ + writel(0x70, par->vid_regs + GX_FP_DFC); + + /* Enable the FP data and power (in case the BIOS didn't) */ + + fp = readl(par->vid_regs + GX_DCFG); + fp |= GX_DCFG_FP_PWR_EN | GX_DCFG_FP_DATA_EN; + writel(fp, par->vid_regs + GX_DCFG); + + /* Unblank the panel */ + + fp = readl(par->vid_regs + GX_FP_PM); + fp |= GX_FP_PM_P; + writel(fp, par->vid_regs + GX_FP_PM); +} + static void gx_configure_display(struct fb_info *info) { struct geodefb_par *par = info->par; - u32 dcfg, fp_pm; + u32 dcfg, misc; + + /* Set up the MISC register */ + + misc = readl(par->vid_regs + GX_MISC); + + /* Power up the DAC */ + misc &= ~(GX_MISC_A_PWRDN | GX_MISC_DAC_PWRDN); + + /* Disable gamma correction */ + misc |= GX_MISC_GAM_EN; + + writel(misc, par->vid_regs + GX_MISC); + /* Write the display configuration */ dcfg = readl(par->vid_regs + GX_DCFG); + /* Disable hsync and vsync */ + dcfg &= ~(GX_DCFG_VSYNC_EN | GX_DCFG_HSYNC_EN); + writel(dcfg, par->vid_regs + GX_DCFG); + /* Clear bits from existing mode. */ dcfg &= ~(GX_DCFG_CRT_SYNC_SKW_MASK | GX_DCFG_CRT_HSYNC_POL | GX_DCFG_CRT_VSYNC_POL @@ -199,12 +274,19 @@ static void gx_configure_display(struct fb_info *info) if (info->var.sync & FB_SYNC_VERT_HIGH_ACT) dcfg |= GX_DCFG_CRT_VSYNC_POL; + /* Enable the display logic */ + /* Set up the DACS to blank normally */ + + dcfg |= GX_DCFG_CRT_EN | GX_DCFG_DAC_BL_EN; + + /* Enable the external DAC VREF? */ + writel(dcfg, par->vid_regs + GX_DCFG); - /* Power on flat panel. */ - fp_pm = readl(par->vid_regs + GX_FP_PM); - fp_pm |= GX_FP_PM_P; - writel(fp_pm, par->vid_regs + GX_FP_PM); + /* Set up the flat panel (if it is enabled) */ + + if (par->enable_crt == 0) + gx_configure_tft(info); } static int gx_blank_display(struct fb_info *info, int blank_mode) @@ -245,12 +327,15 @@ static int gx_blank_display(struct fb_info *info, int blank_mode) writel(dcfg, par->vid_regs + GX_DCFG); /* Power on/off flat panel. */ - fp_pm = readl(par->vid_regs + GX_FP_PM); - if (blank_mode == FB_BLANK_POWERDOWN) - fp_pm &= ~GX_FP_PM_P; - else - fp_pm |= GX_FP_PM_P; - writel(fp_pm, par->vid_regs + GX_FP_PM); + + if (par->enable_crt == 0) { + fp_pm = readl(par->vid_regs + GX_FP_PM); + if (blank_mode == FB_BLANK_POWERDOWN) + fp_pm &= ~GX_FP_PM_P; + else + fp_pm |= GX_FP_PM_P; + writel(fp_pm, par->vid_regs + GX_FP_PM); + } return 0; } |