summaryrefslogtreecommitdiffstats
path: root/drivers/video/geode
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/video/geode')
-rw-r--r--drivers/video/geode/display_gx.h1
-rw-r--r--drivers/video/geode/gxfb_core.c3
-rw-r--r--drivers/video/geode/lxfb.h8
-rw-r--r--drivers/video/geode/lxfb_ops.c19
-rw-r--r--drivers/video/geode/video_gx.c5
-rw-r--r--drivers/video/geode/video_gx.h3
6 files changed, 15 insertions, 24 deletions
diff --git a/drivers/video/geode/display_gx.h b/drivers/video/geode/display_gx.h
index 0af33f329e8..df94e4fc662 100644
--- a/drivers/video/geode/display_gx.h
+++ b/drivers/video/geode/display_gx.h
@@ -17,7 +17,6 @@ int gx_line_delta(int xres, int bpp);
extern struct geode_dc_ops gx_dc_ops;
/* MSR that tells us if a TFT or CRT is attached */
-#define GLD_MSR_CONFIG 0xC0002001
#define GLD_MSR_CONFIG_DM_FP 0x40
/* Display controller registers */
diff --git a/drivers/video/geode/gxfb_core.c b/drivers/video/geode/gxfb_core.c
index cf841efa229..4e22ee0377e 100644
--- a/drivers/video/geode/gxfb_core.c
+++ b/drivers/video/geode/gxfb_core.c
@@ -30,6 +30,7 @@
#include <linux/fb.h>
#include <linux/init.h>
#include <linux/pci.h>
+#include <asm/geode.h>
#include "geodefb.h"
#include "display_gx.h"
@@ -326,7 +327,7 @@ static int __init gxfb_probe(struct pci_dev *pdev, const struct pci_device_id *i
/* Figure out if this is a TFT or CRT part */
- rdmsrl(GLD_MSR_CONFIG, val);
+ rdmsrl(MSR_GX_GLD_MSR_CONFIG, val);
if ((val & GLD_MSR_CONFIG_DM_FP) == GLD_MSR_CONFIG_DM_FP)
par->enable_crt = 0;
diff --git a/drivers/video/geode/lxfb.h b/drivers/video/geode/lxfb.h
index ca13c48d19b..8c83a1b4439 100644
--- a/drivers/video/geode/lxfb.h
+++ b/drivers/video/geode/lxfb.h
@@ -31,14 +31,6 @@ void lx_set_palette_reg(struct fb_info *, unsigned int, unsigned int,
/* MSRS */
-#define MSR_LX_GLD_CONFIG 0x48002001
-#define MSR_LX_GLCP_DOTPLL 0x4c000015
-#define MSR_LX_DF_PADSEL 0x48002011
-#define MSR_LX_DC_SPARE 0x80000011
-#define MSR_LX_DF_GLCONFIG 0x48002001
-
-#define MSR_LX_GLIU0_P2D_RO0 0x10000029
-
#define GLCP_DOTPLL_RESET (1 << 0)
#define GLCP_DOTPLL_BYPASS (1 << 15)
#define GLCP_DOTPLL_HALFPIX (1 << 24)
diff --git a/drivers/video/geode/lxfb_ops.c b/drivers/video/geode/lxfb_ops.c
index 4fbc99be96e..a52c180062c 100644
--- a/drivers/video/geode/lxfb_ops.c
+++ b/drivers/video/geode/lxfb_ops.c
@@ -13,6 +13,7 @@
#include <linux/fb.h>
#include <linux/uaccess.h>
#include <linux/delay.h>
+#include <asm/geode.h>
#include "lxfb.h"
@@ -101,7 +102,7 @@ static void lx_set_dotpll(u32 pllval)
u32 dotpll_lo, dotpll_hi;
int i;
- rdmsr(MSR_LX_GLCP_DOTPLL, dotpll_lo, dotpll_hi);
+ rdmsr(MSR_GLCP_DOTPLL, dotpll_lo, dotpll_hi);
if ((dotpll_lo & GLCP_DOTPLL_LOCK) && (dotpll_hi == pllval))
return;
@@ -110,7 +111,7 @@ static void lx_set_dotpll(u32 pllval)
dotpll_lo &= ~(GLCP_DOTPLL_BYPASS | GLCP_DOTPLL_HALFPIX);
dotpll_lo |= GLCP_DOTPLL_RESET;
- wrmsr(MSR_LX_GLCP_DOTPLL, dotpll_lo, dotpll_hi);
+ wrmsr(MSR_GLCP_DOTPLL, dotpll_lo, dotpll_hi);
/* Wait 100us for the PLL to lock */
@@ -119,7 +120,7 @@ static void lx_set_dotpll(u32 pllval)
/* Now, loop for the lock bit */
for (i = 0; i < 1000; i++) {
- rdmsr(MSR_LX_GLCP_DOTPLL, dotpll_lo, dotpll_hi);
+ rdmsr(MSR_GLCP_DOTPLL, dotpll_lo, dotpll_hi);
if (dotpll_lo & GLCP_DOTPLL_LOCK)
break;
}
@@ -127,7 +128,7 @@ static void lx_set_dotpll(u32 pllval)
/* Clear the reset bit */
dotpll_lo &= ~GLCP_DOTPLL_RESET;
- wrmsr(MSR_LX_GLCP_DOTPLL, dotpll_lo, dotpll_hi);
+ wrmsr(MSR_GLCP_DOTPLL, dotpll_lo, dotpll_hi);
}
/* Set the clock based on the frequency specified by the current mode */
@@ -255,7 +256,7 @@ static void lx_graphics_enable(struct fb_info *info)
msrlo = DF_DEFAULT_TFT_PAD_SEL_LOW;
msrhi = DF_DEFAULT_TFT_PAD_SEL_HIGH;
- wrmsr(MSR_LX_DF_PADSEL, msrlo, msrhi);
+ wrmsr(MSR_LX_MSR_PADSEL, msrlo, msrhi);
}
if (par->output & OUTPUT_CRT) {
@@ -321,7 +322,7 @@ void lx_set_mode(struct fb_info *info)
/* Set output mode */
- rdmsrl(MSR_LX_DF_GLCONFIG, msrval);
+ rdmsrl(MSR_LX_GLD_MSR_CONFIG, msrval);
msrval &= ~DF_CONFIG_OUTPUT_MASK;
if (par->output & OUTPUT_PANEL) {
@@ -335,7 +336,7 @@ void lx_set_mode(struct fb_info *info)
msrval |= DF_OUTPUT_CRT;
}
- wrmsrl(MSR_LX_DF_GLCONFIG, msrval);
+ wrmsrl(MSR_LX_GLD_MSR_CONFIG, msrval);
/* Clear the various buffers */
/* FIXME: Adjust for panning here */
@@ -383,13 +384,13 @@ void lx_set_mode(struct fb_info *info)
/* Set default watermark values */
- rdmsrl(MSR_LX_DC_SPARE, msrval);
+ rdmsrl(MSR_LX_SPARE_MSR, msrval);
msrval &= ~(DC_SPARE_DISABLE_CFIFO_HGO | DC_SPARE_VFIFO_ARB_SELECT |
DC_SPARE_LOAD_WM_LPEN_MASK | DC_SPARE_WM_LPEN_OVRD |
DC_SPARE_DISABLE_INIT_VID_PRI | DC_SPARE_DISABLE_VFIFO_WM);
msrval |= DC_SPARE_DISABLE_VFIFO_WM | DC_SPARE_DISABLE_INIT_VID_PRI;
- wrmsrl(MSR_LX_DC_SPARE, msrval);
+ wrmsrl(MSR_LX_SPARE_MSR, msrval);
gcfg = DC_GCFG_DFLE; /* Display fifo enable */
gcfg |= 0xB600; /* Set default priority */
diff --git a/drivers/video/geode/video_gx.c b/drivers/video/geode/video_gx.c
index febf09c6349..d0885370675 100644
--- a/drivers/video/geode/video_gx.c
+++ b/drivers/video/geode/video_gx.c
@@ -16,6 +16,7 @@
#include <asm/io.h>
#include <asm/delay.h>
#include <asm/msr.h>
+#include <asm/geode.h>
#include "geodefb.h"
#include "video_gx.h"
@@ -184,10 +185,10 @@ gx_configure_tft(struct fb_info *info)
/* Set up the DF pad select MSR */
- rdmsrl(GX_VP_MSR_PAD_SELECT, val);
+ rdmsrl(MSR_GX_MSR_PADSEL, val);
val &= ~GX_VP_PAD_SELECT_MASK;
val |= GX_VP_PAD_SELECT_TFT;
- wrmsrl(GX_VP_MSR_PAD_SELECT, val);
+ wrmsrl(MSR_GX_MSR_PADSEL, val);
/* Turn off the panel */
diff --git a/drivers/video/geode/video_gx.h b/drivers/video/geode/video_gx.h
index ce28d8f382d..d21bca02059 100644
--- a/drivers/video/geode/video_gx.h
+++ b/drivers/video/geode/video_gx.h
@@ -14,7 +14,6 @@
extern struct geode_vid_ops gx_vid_ops;
/* GX Flatpanel control MSR */
-#define GX_VP_MSR_PAD_SELECT 0xC0002011
#define GX_VP_PAD_SELECT_MASK 0x3FFFFFFF
#define GX_VP_PAD_SELECT_TFT 0x1FFFFFFF
@@ -59,12 +58,10 @@ extern struct geode_vid_ops gx_vid_ops;
/* Geode GX clock control MSRs */
-#define MSR_GLCP_SYS_RSTPLL 0x4c000014
# define MSR_GLCP_SYS_RSTPLL_DOTPREDIV2 (0x0000000000000002ull)
# define MSR_GLCP_SYS_RSTPLL_DOTPREMULT2 (0x0000000000000004ull)
# define MSR_GLCP_SYS_RSTPLL_DOTPOSTDIV3 (0x0000000000000008ull)
-#define MSR_GLCP_DOTPLL 0x4c000015
# define MSR_GLCP_DOTPLL_DOTRESET (0x0000000000000001ull)
# define MSR_GLCP_DOTPLL_BYPASS (0x0000000000008000ull)
# define MSR_GLCP_DOTPLL_LOCK (0x0000000002000000ull)
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-23 23:32:38 +0000