diff options
Diffstat (limited to 'drivers/video/omap/rfbi.c')
-rw-r--r-- | drivers/video/omap/rfbi.c | 598 |
1 files changed, 0 insertions, 598 deletions
diff --git a/drivers/video/omap/rfbi.c b/drivers/video/omap/rfbi.c deleted file mode 100644 index 2c1a3402bef..00000000000 --- a/drivers/video/omap/rfbi.c +++ /dev/null @@ -1,598 +0,0 @@ -/* - * OMAP2 Remote Frame Buffer Interface support - * - * Copyright (C) 2005 Nokia Corporation - * Author: Juha Yrjölä <juha.yrjola@nokia.com> - * Imre Deak <imre.deak@nokia.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ -#include <linux/module.h> -#include <linux/delay.h> -#include <linux/i2c.h> -#include <linux/err.h> -#include <linux/interrupt.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/platform_device.h> - -#include "omapfb.h" -#include "dispc.h" - -/* To work around an RFBI transfer rate limitation */ -#define OMAP_RFBI_RATE_LIMIT 1 - -#define RFBI_BASE 0x48050800 -#define RFBI_REVISION 0x0000 -#define RFBI_SYSCONFIG 0x0010 -#define RFBI_SYSSTATUS 0x0014 -#define RFBI_CONTROL 0x0040 -#define RFBI_PIXEL_CNT 0x0044 -#define RFBI_LINE_NUMBER 0x0048 -#define RFBI_CMD 0x004c -#define RFBI_PARAM 0x0050 -#define RFBI_DATA 0x0054 -#define RFBI_READ 0x0058 -#define RFBI_STATUS 0x005c -#define RFBI_CONFIG0 0x0060 -#define RFBI_ONOFF_TIME0 0x0064 -#define RFBI_CYCLE_TIME0 0x0068 -#define RFBI_DATA_CYCLE1_0 0x006c -#define RFBI_DATA_CYCLE2_0 0x0070 -#define RFBI_DATA_CYCLE3_0 0x0074 -#define RFBI_VSYNC_WIDTH 0x0090 -#define RFBI_HSYNC_WIDTH 0x0094 - -#define DISPC_BASE 0x48050400 -#define DISPC_CONTROL 0x0040 -#define DISPC_IRQ_FRAMEMASK 0x0001 - -static struct { - void __iomem *base; - void (*lcdc_callback)(void *data); - void *lcdc_callback_data; - unsigned long l4_khz; - int bits_per_cycle; - struct omapfb_device *fbdev; - struct clk *dss_ick; - struct clk *dss1_fck; - unsigned tearsync_pin_cnt; - unsigned tearsync_mode; -} rfbi; - -static inline void rfbi_write_reg(int idx, u32 val) -{ - __raw_writel(val, rfbi.base + idx); -} - -static inline u32 rfbi_read_reg(int idx) -{ - return __raw_readl(rfbi.base + idx); -} - -static int rfbi_get_clocks(void) -{ - rfbi.dss_ick = clk_get(&rfbi.fbdev->dssdev->dev, "ick"); - if (IS_ERR(rfbi.dss_ick)) { - dev_err(rfbi.fbdev->dev, "can't get ick\n"); - return PTR_ERR(rfbi.dss_ick); - } - - rfbi.dss1_fck = clk_get(&rfbi.fbdev->dssdev->dev, "fck"); - if (IS_ERR(rfbi.dss1_fck)) { - dev_err(rfbi.fbdev->dev, "can't get dss1_fck\n"); - clk_put(rfbi.dss_ick); - return PTR_ERR(rfbi.dss1_fck); - } - - return 0; -} - -static void rfbi_put_clocks(void) -{ - clk_put(rfbi.dss1_fck); - clk_put(rfbi.dss_ick); -} - -static void rfbi_enable_clocks(int enable) -{ - if (enable) { - clk_enable(rfbi.dss_ick); - clk_enable(rfbi.dss1_fck); - } else { - clk_disable(rfbi.dss1_fck); - clk_disable(rfbi.dss_ick); - } -} - - -#ifdef VERBOSE -static void rfbi_print_timings(void) -{ - u32 l; - u32 time; - - l = rfbi_read_reg(RFBI_CONFIG0); - time = 1000000000 / rfbi.l4_khz; - if (l & (1 << 4)) - time *= 2; - - dev_dbg(rfbi.fbdev->dev, "Tick time %u ps\n", time); - l = rfbi_read_reg(RFBI_ONOFF_TIME0); - dev_dbg(rfbi.fbdev->dev, - "CSONTIME %d, CSOFFTIME %d, WEONTIME %d, WEOFFTIME %d, " - "REONTIME %d, REOFFTIME %d\n", - l & 0x0f, (l >> 4) & 0x3f, (l >> 10) & 0x0f, (l >> 14) & 0x3f, - (l >> 20) & 0x0f, (l >> 24) & 0x3f); - - l = rfbi_read_reg(RFBI_CYCLE_TIME0); - dev_dbg(rfbi.fbdev->dev, - "WECYCLETIME %d, RECYCLETIME %d, CSPULSEWIDTH %d, " - "ACCESSTIME %d\n", - (l & 0x3f), (l >> 6) & 0x3f, (l >> 12) & 0x3f, - (l >> 22) & 0x3f); -} -#else -static void rfbi_print_timings(void) {} -#endif - -static void rfbi_set_timings(const struct extif_timings *t) -{ - u32 l; - - BUG_ON(!t->converted); - - rfbi_enable_clocks(1); - rfbi_write_reg(RFBI_ONOFF_TIME0, t->tim[0]); - rfbi_write_reg(RFBI_CYCLE_TIME0, t->tim[1]); - - l = rfbi_read_reg(RFBI_CONFIG0); - l &= ~(1 << 4); - l |= (t->tim[2] ? 1 : 0) << 4; - rfbi_write_reg(RFBI_CONFIG0, l); - - rfbi_print_timings(); - rfbi_enable_clocks(0); -} - -static void rfbi_get_clk_info(u32 *clk_period, u32 *max_clk_div) -{ - *clk_period = 1000000000 / rfbi.l4_khz; - *max_clk_div = 2; -} - -static int ps_to_rfbi_ticks(int time, int div) -{ - unsigned long tick_ps; - int ret; - - /* Calculate in picosecs to yield more exact results */ - tick_ps = 1000000000 / (rfbi.l4_khz) * div; - - ret = (time + tick_ps - 1) / tick_ps; - - return ret; -} - -#ifdef OMAP_RFBI_RATE_LIMIT -static unsigned long rfbi_get_max_tx_rate(void) -{ - unsigned long l4_rate, dss1_rate; - int min_l4_ticks = 0; - int i; - - /* According to TI this can't be calculated so make the - * adjustments for a couple of known frequencies and warn for - * others. - */ - static const struct { - unsigned long l4_clk; /* HZ */ - unsigned long dss1_clk; /* HZ */ - unsigned long min_l4_ticks; - } ftab[] = { - { 55, 132, 7, }, /* 7.86 MPix/s */ - { 110, 110, 12, }, /* 9.16 MPix/s */ - { 110, 132, 10, }, /* 11 Mpix/s */ - { 120, 120, 10, }, /* 12 Mpix/s */ - { 133, 133, 10, }, /* 13.3 Mpix/s */ - }; - - l4_rate = rfbi.l4_khz / 1000; - dss1_rate = clk_get_rate(rfbi.dss1_fck) / 1000000; - - for (i = 0; i < ARRAY_SIZE(ftab); i++) { - /* Use a window instead of an exact match, to account - * for different DPLL multiplier / divider pairs. - */ - if (abs(ftab[i].l4_clk - l4_rate) < 3 && - abs(ftab[i].dss1_clk - dss1_rate) < 3) { - min_l4_ticks = ftab[i].min_l4_ticks; - break; - } - } - if (i == ARRAY_SIZE(ftab)) { - /* Can't be sure, return anyway the maximum not - * rate-limited. This might cause a problem only for the - * tearing synchronisation. - */ - dev_err(rfbi.fbdev->dev, - "can't determine maximum RFBI transfer rate\n"); - return rfbi.l4_khz * 1000; - } - return rfbi.l4_khz * 1000 / min_l4_ticks; -} -#else -static int rfbi_get_max_tx_rate(void) -{ - return rfbi.l4_khz * 1000; -} -#endif - - -static int rfbi_convert_timings(struct extif_timings *t) -{ - u32 l; - int reon, reoff, weon, weoff, cson, csoff, cs_pulse; - int actim, recyc, wecyc; - int div = t->clk_div; - - if (div <= 0 || div > 2) - return -1; - - /* Make sure that after conversion it still holds that: - * weoff > weon, reoff > reon, recyc >= reoff, wecyc >= weoff, - * csoff > cson, csoff >= max(weoff, reoff), actim > reon - */ - weon = ps_to_rfbi_ticks(t->we_on_time, div); - weoff = ps_to_rfbi_ticks(t->we_off_time, div); - if (weoff <= weon) - weoff = weon + 1; - if (weon > 0x0f) - return -1; - if (weoff > 0x3f) - return -1; - - reon = ps_to_rfbi_ticks(t->re_on_time, div); - reoff = ps_to_rfbi_ticks(t->re_off_time, div); - if (reoff <= reon) - reoff = reon + 1; - if (reon > 0x0f) - return -1; - if (reoff > 0x3f) - return -1; - - cson = ps_to_rfbi_ticks(t->cs_on_time, div); - csoff = ps_to_rfbi_ticks(t->cs_off_time, div); - if (csoff <= cson) - csoff = cson + 1; - if (csoff < max(weoff, reoff)) - csoff = max(weoff, reoff); - if (cson > 0x0f) - return -1; - if (csoff > 0x3f) - return -1; - - l = cson; - l |= csoff << 4; - l |= weon << 10; - l |= weoff << 14; - l |= reon << 20; - l |= reoff << 24; - - t->tim[0] = l; - - actim = ps_to_rfbi_ticks(t->access_time, div); - if (actim <= reon) - actim = reon + 1; - if (actim > 0x3f) - return -1; - - wecyc = ps_to_rfbi_ticks(t->we_cycle_time, div); - if (wecyc < weoff) - wecyc = weoff; - if (wecyc > 0x3f) - return -1; - - recyc = ps_to_rfbi_ticks(t->re_cycle_time, div); - if (recyc < reoff) - recyc = reoff; - if (recyc > 0x3f) - return -1; - - cs_pulse = ps_to_rfbi_ticks(t->cs_pulse_width, div); - if (cs_pulse > 0x3f) - return -1; - - l = wecyc; - l |= recyc << 6; - l |= cs_pulse << 12; - l |= actim << 22; - - t->tim[1] = l; - - t->tim[2] = div - 1; - - t->converted = 1; - - return 0; -} - -static int rfbi_setup_tearsync(unsigned pin_cnt, - unsigned hs_pulse_time, unsigned vs_pulse_time, - int hs_pol_inv, int vs_pol_inv, int extif_div) -{ - int hs, vs; - int min; - u32 l; - - if (pin_cnt != 1 && pin_cnt != 2) - return -EINVAL; - - hs = ps_to_rfbi_ticks(hs_pulse_time, 1); - vs = ps_to_rfbi_ticks(vs_pulse_time, 1); - if (hs < 2) - return -EDOM; - if (pin_cnt == 2) - min = 2; - else - min = 4; - if (vs < min) - return -EDOM; - if (vs == hs) - return -EINVAL; - rfbi.tearsync_pin_cnt = pin_cnt; - dev_dbg(rfbi.fbdev->dev, - "setup_tearsync: pins %d hs %d vs %d hs_inv %d vs_inv %d\n", - pin_cnt, hs, vs, hs_pol_inv, vs_pol_inv); - - rfbi_enable_clocks(1); - rfbi_write_reg(RFBI_HSYNC_WIDTH, hs); - rfbi_write_reg(RFBI_VSYNC_WIDTH, vs); - - l = rfbi_read_reg(RFBI_CONFIG0); - if (hs_pol_inv) - l &= ~(1 << 21); - else - l |= 1 << 21; - if (vs_pol_inv) - l &= ~(1 << 20); - else - l |= 1 << 20; - rfbi_enable_clocks(0); - - return 0; -} - -static int rfbi_enable_tearsync(int enable, unsigned line) -{ - u32 l; - - dev_dbg(rfbi.fbdev->dev, "tearsync %d line %d mode %d\n", - enable, line, rfbi.tearsync_mode); - if (line > (1 << 11) - 1) - return -EINVAL; - - rfbi_enable_clocks(1); - l = rfbi_read_reg(RFBI_CONFIG0); - l &= ~(0x3 << 2); - if (enable) { - rfbi.tearsync_mode = rfbi.tearsync_pin_cnt; - l |= rfbi.tearsync_mode << 2; - } else - rfbi.tearsync_mode = 0; - rfbi_write_reg(RFBI_CONFIG0, l); - rfbi_write_reg(RFBI_LINE_NUMBER, line); - rfbi_enable_clocks(0); - - return 0; -} - -static void rfbi_write_command(const void *buf, unsigned int len) -{ - rfbi_enable_clocks(1); - if (rfbi.bits_per_cycle == 16) { - const u16 *w = buf; - BUG_ON(len & 1); - for (; len; len -= 2) - rfbi_write_reg(RFBI_CMD, *w++); - } else { - const u8 *b = buf; - BUG_ON(rfbi.bits_per_cycle != 8); - for (; len; len--) - rfbi_write_reg(RFBI_CMD, *b++); - } - rfbi_enable_clocks(0); -} - -static void rfbi_read_data(void *buf, unsigned int len) -{ - rfbi_enable_clocks(1); - if (rfbi.bits_per_cycle == 16) { - u16 *w = buf; - BUG_ON(len & ~1); - for (; len; len -= 2) { - rfbi_write_reg(RFBI_READ, 0); - *w++ = rfbi_read_reg(RFBI_READ); - } - } else { - u8 *b = buf; - BUG_ON(rfbi.bits_per_cycle != 8); - for (; len; len--) { - rfbi_write_reg(RFBI_READ, 0); - *b++ = rfbi_read_reg(RFBI_READ); - } - } - rfbi_enable_clocks(0); -} - -static void rfbi_write_data(const void *buf, unsigned int len) -{ - rfbi_enable_clocks(1); - if (rfbi.bits_per_cycle == 16) { - const u16 *w = buf; - BUG_ON(len & 1); - for (; len; len -= 2) - rfbi_write_reg(RFBI_PARAM, *w++); - } else { - const u8 *b = buf; - BUG_ON(rfbi.bits_per_cycle != 8); - for (; len; len--) - rfbi_write_reg(RFBI_PARAM, *b++); - } - rfbi_enable_clocks(0); -} - -static void rfbi_transfer_area(int width, int height, - void (callback)(void * data), void *data) -{ - u32 w; - - BUG_ON(callback == NULL); - - rfbi_enable_clocks(1); - omap_dispc_set_lcd_size(width, height); - - rfbi.lcdc_callback = callback; - rfbi.lcdc_callback_data = data; - - rfbi_write_reg(RFBI_PIXEL_CNT, width * height); - - w = rfbi_read_reg(RFBI_CONTROL); - w |= 1; /* enable */ - if (!rfbi.tearsync_mode) - w |= 1 << 4; /* internal trigger, reset by HW */ - rfbi_write_reg(RFBI_CONTROL, w); - - omap_dispc_enable_lcd_out(1); -} - -static inline void _stop_transfer(void) -{ - u32 w; - - w = rfbi_read_reg(RFBI_CONTROL); - rfbi_write_reg(RFBI_CONTROL, w & ~(1 << 0)); - rfbi_enable_clocks(0); -} - -static void rfbi_dma_callback(void *data) -{ - _stop_transfer(); - rfbi.lcdc_callback(rfbi.lcdc_callback_data); -} - -static void rfbi_set_bits_per_cycle(int bpc) -{ - u32 l; - - rfbi_enable_clocks(1); - l = rfbi_read_reg(RFBI_CONFIG0); - l &= ~(0x03 << 0); - - switch (bpc) { - case 8: - break; - case 16: - l |= 3; - break; - default: - BUG(); - } - rfbi_write_reg(RFBI_CONFIG0, l); - rfbi.bits_per_cycle = bpc; - rfbi_enable_clocks(0); -} - -static int rfbi_init(struct omapfb_device *fbdev) -{ - u32 l; - int r; - - rfbi.fbdev = fbdev; - rfbi.base = ioremap(RFBI_BASE, SZ_1K); - if (!rfbi.base) { - dev_err(fbdev->dev, "can't ioremap RFBI\n"); - return -ENOMEM; - } - - if ((r = rfbi_get_clocks()) < 0) - return r; - rfbi_enable_clocks(1); - - rfbi.l4_khz = clk_get_rate(rfbi.dss_ick) / 1000; - - /* Reset */ - rfbi_write_reg(RFBI_SYSCONFIG, 1 << 1); - while (!(rfbi_read_reg(RFBI_SYSSTATUS) & (1 << 0))); - - l = rfbi_read_reg(RFBI_SYSCONFIG); - /* Enable autoidle and smart-idle */ - l |= (1 << 0) | (2 << 3); - rfbi_write_reg(RFBI_SYSCONFIG, l); - - /* 16-bit interface, ITE trigger mode, 16-bit data */ - l = (0x03 << 0) | (0x00 << 2) | (0x01 << 5) | (0x02 << 7); - l |= (0 << 9) | (1 << 20) | (1 << 21); - rfbi_write_reg(RFBI_CONFIG0, l); - - rfbi_write_reg(RFBI_DATA_CYCLE1_0, 0x00000010); - - l = rfbi_read_reg(RFBI_CONTROL); - /* Select CS0, clear bypass mode */ - l = (0x01 << 2); - rfbi_write_reg(RFBI_CONTROL, l); - - r = omap_dispc_request_irq(DISPC_IRQ_FRAMEMASK, rfbi_dma_callback, - NULL); - if (r < 0) { - dev_err(fbdev->dev, "can't get DISPC irq\n"); - rfbi_enable_clocks(0); - return r; - } - - l = rfbi_read_reg(RFBI_REVISION); - pr_info("omapfb: RFBI version %d.%d initialized\n", - (l >> 4) & 0x0f, l & 0x0f); - - rfbi_enable_clocks(0); - - return 0; -} - -static void rfbi_cleanup(void) -{ - omap_dispc_free_irq(DISPC_IRQ_FRAMEMASK, rfbi_dma_callback, NULL); - rfbi_put_clocks(); - iounmap(rfbi.base); -} - -const struct lcd_ctrl_extif omap2_ext_if = { - .init = rfbi_init, - .cleanup = rfbi_cleanup, - .get_clk_info = rfbi_get_clk_info, - .get_max_tx_rate = rfbi_get_max_tx_rate, - .set_bits_per_cycle = rfbi_set_bits_per_cycle, - .convert_timings = rfbi_convert_timings, - .set_timings = rfbi_set_timings, - .write_command = rfbi_write_command, - .read_data = rfbi_read_data, - .write_data = rfbi_write_data, - .transfer_area = rfbi_transfer_area, - .setup_tearsync = rfbi_setup_tearsync, - .enable_tearsync = rfbi_enable_tearsync, - - .max_transmit_size = (u32) ~0, -}; - |