summaryrefslogtreecommitdiffstats
path: root/drivers/video/omap2/displays/panel-sharp-ls037v7dw01.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/video/omap2/displays/panel-sharp-ls037v7dw01.c')
-rw-r--r--drivers/video/omap2/displays/panel-sharp-ls037v7dw01.c77
1 files changed, 36 insertions, 41 deletions
diff --git a/drivers/video/omap2/displays/panel-sharp-ls037v7dw01.c b/drivers/video/omap2/displays/panel-sharp-ls037v7dw01.c
index bbe880bbe79..8d51a5e6341 100644
--- a/drivers/video/omap2/displays/panel-sharp-ls037v7dw01.c
+++ b/drivers/video/omap2/displays/panel-sharp-ls037v7dw01.c
@@ -20,19 +20,10 @@
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/device.h>
-#include <linux/regulator/consumer.h>
#include <linux/err.h>
#include <plat/display.h>
-struct sharp_data {
- /* XXX This regulator should actually be in SDP board file, not here,
- * as it doesn't actually power the LCD, but something else that
- * affects the output to LCD (I think. Somebody clarify). It doesn't do
- * harm here, as SDP is the only board using this currently */
- struct regulator *vdvi_reg;
-};
-
static struct omap_video_timings sharp_ls_timings = {
.x_res = 480,
.y_res = 640,
@@ -50,77 +41,81 @@ static struct omap_video_timings sharp_ls_timings = {
static int sharp_ls_panel_probe(struct omap_dss_device *dssdev)
{
- struct sharp_data *sd;
-
dssdev->panel.config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS |
OMAP_DSS_LCD_IHS;
dssdev->panel.acb = 0x28;
dssdev->panel.timings = sharp_ls_timings;
- sd = kzalloc(sizeof(*sd), GFP_KERNEL);
- if (!sd)
- return -ENOMEM;
-
- dev_set_drvdata(&dssdev->dev, sd);
-
- sd->vdvi_reg = regulator_get(&dssdev->dev, "vdvi");
- if (IS_ERR(sd->vdvi_reg)) {
- kfree(sd);
- pr_err("failed to get VDVI regulator\n");
- return PTR_ERR(sd->vdvi_reg);
- }
-
return 0;
}
static void sharp_ls_panel_remove(struct omap_dss_device *dssdev)
{
- struct sharp_data *sd = dev_get_drvdata(&dssdev->dev);
-
- regulator_put(sd->vdvi_reg);
-
- kfree(sd);
}
-static int sharp_ls_panel_enable(struct omap_dss_device *dssdev)
+static int sharp_ls_power_on(struct omap_dss_device *dssdev)
{
- struct sharp_data *sd = dev_get_drvdata(&dssdev->dev);
int r = 0;
+ r = omapdss_dpi_display_enable(dssdev);
+ if (r)
+ goto err0;
+
/* wait couple of vsyncs until enabling the LCD */
msleep(50);
- regulator_enable(sd->vdvi_reg);
-
- if (dssdev->platform_enable)
+ if (dssdev->platform_enable) {
r = dssdev->platform_enable(dssdev);
+ if (r)
+ goto err1;
+ }
+ return 0;
+err1:
+ omapdss_dpi_display_disable(dssdev);
+err0:
return r;
}
-static void sharp_ls_panel_disable(struct omap_dss_device *dssdev)
+static void sharp_ls_power_off(struct omap_dss_device *dssdev)
{
- struct sharp_data *sd = dev_get_drvdata(&dssdev->dev);
-
if (dssdev->platform_disable)
dssdev->platform_disable(dssdev);
- regulator_disable(sd->vdvi_reg);
-
/* wait at least 5 vsyncs after disabling the LCD */
msleep(100);
+
+ omapdss_dpi_display_disable(dssdev);
+}
+
+static int sharp_ls_panel_enable(struct omap_dss_device *dssdev)
+{
+ int r;
+ r = sharp_ls_power_on(dssdev);
+ dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+ return r;
+}
+
+static void sharp_ls_panel_disable(struct omap_dss_device *dssdev)
+{
+ sharp_ls_power_off(dssdev);
+ dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
}
static int sharp_ls_panel_suspend(struct omap_dss_device *dssdev)
{
- sharp_ls_panel_disable(dssdev);
+ sharp_ls_power_off(dssdev);
+ dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED;
return 0;
}
static int sharp_ls_panel_resume(struct omap_dss_device *dssdev)
{
- return sharp_ls_panel_enable(dssdev);
+ int r;
+ r = sharp_ls_power_on(dssdev);
+ dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+ return r;
}
static struct omap_dss_driver sharp_ls_driver = {