diff options
Diffstat (limited to 'drivers/video/omap2/displays/panel-tpo-td043mtea1.c')
-rw-r--r-- | drivers/video/omap2/displays/panel-tpo-td043mtea1.c | 177 |
1 files changed, 112 insertions, 65 deletions
diff --git a/drivers/video/omap2/displays/panel-tpo-td043mtea1.c b/drivers/video/omap2/displays/panel-tpo-td043mtea1.c index e6649aa8959..32f3fcd7f0f 100644 --- a/drivers/video/omap2/displays/panel-tpo-td043mtea1.c +++ b/drivers/video/omap2/displays/panel-tpo-td043mtea1.c @@ -47,16 +47,20 @@ TPO_R03_EN_PRE_CHARGE | TPO_R03_SOFTWARE_CTL) static const u16 tpo_td043_def_gamma[12] = { - 106, 200, 289, 375, 460, 543, 625, 705, 785, 864, 942, 1020 + 105, 315, 381, 431, 490, 537, 579, 686, 780, 837, 880, 1023 }; struct tpo_td043_device { struct spi_device *spi; struct regulator *vcc_reg; + int nreset_gpio; u16 gamma[12]; u32 mode; u32 hmirror:1; u32 vmirror:1; + u32 powered_on:1; + u32 spi_suspended:1; + u32 power_on_resume:1; }; static int tpo_td043_write(struct spi_device *spi, u8 addr, u8 data) @@ -265,28 +269,16 @@ static const struct omap_video_timings tpo_td043_timings = { .vbp = 34, }; -static int tpo_td043_power_on(struct omap_dss_device *dssdev) +static int tpo_td043_power_on(struct tpo_td043_device *tpo_td043) { - struct tpo_td043_device *tpo_td043 = dev_get_drvdata(&dssdev->dev); - int nreset_gpio = dssdev->reset_gpio; - int r; + int nreset_gpio = tpo_td043->nreset_gpio; - if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE) + if (tpo_td043->powered_on) return 0; - r = omapdss_dpi_display_enable(dssdev); - if (r) - goto err0; - - if (dssdev->platform_enable) { - r = dssdev->platform_enable(dssdev); - if (r) - goto err1; - } - regulator_enable(tpo_td043->vcc_reg); - /* wait for power up */ + /* wait for regulator to stabilize */ msleep(160); if (gpio_is_valid(nreset_gpio)) @@ -301,19 +293,15 @@ static int tpo_td043_power_on(struct omap_dss_device *dssdev) tpo_td043->vmirror); tpo_td043_write_gamma(tpo_td043->spi, tpo_td043->gamma); + tpo_td043->powered_on = 1; return 0; -err1: - omapdss_dpi_display_disable(dssdev); -err0: - return r; } -static void tpo_td043_power_off(struct omap_dss_device *dssdev) +static void tpo_td043_power_off(struct tpo_td043_device *tpo_td043) { - struct tpo_td043_device *tpo_td043 = dev_get_drvdata(&dssdev->dev); - int nreset_gpio = dssdev->reset_gpio; + int nreset_gpio = tpo_td043->nreset_gpio; - if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE) + if (!tpo_td043->powered_on) return; tpo_td043_write(tpo_td043->spi, 3, @@ -329,54 +317,94 @@ static void tpo_td043_power_off(struct omap_dss_device *dssdev) regulator_disable(tpo_td043->vcc_reg); + tpo_td043->powered_on = 0; +} + +static int tpo_td043_enable_dss(struct omap_dss_device *dssdev) +{ + struct tpo_td043_device *tpo_td043 = dev_get_drvdata(&dssdev->dev); + int r; + + if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE) + return 0; + + r = omapdss_dpi_display_enable(dssdev); + if (r) + goto err0; + + if (dssdev->platform_enable) { + r = dssdev->platform_enable(dssdev); + if (r) + goto err1; + } + + /* + * If we are resuming from system suspend, SPI clocks might not be + * enabled yet, so we'll program the LCD from SPI PM resume callback. + */ + if (!tpo_td043->spi_suspended) { + r = tpo_td043_power_on(tpo_td043); + if (r) + goto err1; + } + + dssdev->state = OMAP_DSS_DISPLAY_ACTIVE; + + return 0; +err1: + omapdss_dpi_display_disable(dssdev); +err0: + return r; +} + +static void tpo_td043_disable_dss(struct omap_dss_device *dssdev) +{ + struct tpo_td043_device *tpo_td043 = dev_get_drvdata(&dssdev->dev); + + if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE) + return; + if (dssdev->platform_disable) dssdev->platform_disable(dssdev); omapdss_dpi_display_disable(dssdev); + + if (!tpo_td043->spi_suspended) + tpo_td043_power_off(tpo_td043); } static int tpo_td043_enable(struct omap_dss_device *dssdev) { - int ret; - dev_dbg(&dssdev->dev, "enable\n"); - ret = tpo_td043_power_on(dssdev); - if (ret) - return ret; - - dssdev->state = OMAP_DSS_DISPLAY_ACTIVE; - - return 0; + return tpo_td043_enable_dss(dssdev); } static void tpo_td043_disable(struct omap_dss_device *dssdev) { dev_dbg(&dssdev->dev, "disable\n"); - tpo_td043_power_off(dssdev); + tpo_td043_disable_dss(dssdev); dssdev->state = OMAP_DSS_DISPLAY_DISABLED; } static int tpo_td043_suspend(struct omap_dss_device *dssdev) { - tpo_td043_power_off(dssdev); + dev_dbg(&dssdev->dev, "suspend\n"); + + tpo_td043_disable_dss(dssdev); + dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED; + return 0; } static int tpo_td043_resume(struct omap_dss_device *dssdev) { - int r = 0; - - r = tpo_td043_power_on(dssdev); - if (r) - return r; + dev_dbg(&dssdev->dev, "resume\n"); - dssdev->state = OMAP_DSS_DISPLAY_ACTIVE; - - return 0; + return tpo_td043_enable_dss(dssdev); } static int tpo_td043_probe(struct omap_dss_device *dssdev) @@ -408,17 +436,12 @@ static int tpo_td043_probe(struct omap_dss_device *dssdev) } if (gpio_is_valid(nreset_gpio)) { - ret = gpio_request(nreset_gpio, "lcd reset"); + ret = gpio_request_one(nreset_gpio, GPIOF_OUT_INIT_LOW, + "lcd reset"); if (ret < 0) { dev_err(&dssdev->dev, "couldn't request reset GPIO\n"); goto fail_gpio_req; } - - ret = gpio_direction_output(nreset_gpio, 0); - if (ret < 0) { - dev_err(&dssdev->dev, "couldn't set GPIO direction\n"); - goto fail_gpio_direction; - } } ret = sysfs_create_group(&dssdev->dev.kobj, &tpo_td043_attr_group); @@ -427,8 +450,6 @@ static int tpo_td043_probe(struct omap_dss_device *dssdev) return 0; -fail_gpio_direction: - gpio_free(nreset_gpio); fail_gpio_req: regulator_put(tpo_td043->vcc_reg); fail_regulator: @@ -491,6 +512,7 @@ static int tpo_td043_spi_probe(struct spi_device *spi) return -ENOMEM; tpo_td043->spi = spi; + tpo_td043->nreset_gpio = dssdev->reset_gpio; dev_set_drvdata(&spi->dev, tpo_td043); dev_set_drvdata(&dssdev->dev, tpo_td043); @@ -509,27 +531,52 @@ static int __devexit tpo_td043_spi_remove(struct spi_device *spi) return 0; } +#ifdef CONFIG_PM_SLEEP +static int tpo_td043_spi_suspend(struct device *dev) +{ + struct tpo_td043_device *tpo_td043 = dev_get_drvdata(dev); + + dev_dbg(dev, "tpo_td043_spi_suspend, tpo %p\n", tpo_td043); + + tpo_td043->power_on_resume = tpo_td043->powered_on; + tpo_td043_power_off(tpo_td043); + tpo_td043->spi_suspended = 1; + + return 0; +} + +static int tpo_td043_spi_resume(struct device *dev) +{ + struct tpo_td043_device *tpo_td043 = dev_get_drvdata(dev); + int ret; + + dev_dbg(dev, "tpo_td043_spi_resume\n"); + + if (tpo_td043->power_on_resume) { + ret = tpo_td043_power_on(tpo_td043); + if (ret) + return ret; + } + tpo_td043->spi_suspended = 0; + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(tpo_td043_spi_pm, + tpo_td043_spi_suspend, tpo_td043_spi_resume); + static struct spi_driver tpo_td043_spi_driver = { .driver = { .name = "tpo_td043mtea1_panel_spi", .owner = THIS_MODULE, + .pm = &tpo_td043_spi_pm, }, .probe = tpo_td043_spi_probe, .remove = __devexit_p(tpo_td043_spi_remove), }; -static int __init tpo_td043_init(void) -{ - return spi_register_driver(&tpo_td043_spi_driver); -} - -static void __exit tpo_td043_exit(void) -{ - spi_unregister_driver(&tpo_td043_spi_driver); -} - -module_init(tpo_td043_init); -module_exit(tpo_td043_exit); +module_spi_driver(tpo_td043_spi_driver); MODULE_AUTHOR("GraÅžvydas Ignotas <notasas@gmail.com>"); MODULE_DESCRIPTION("TPO TD043MTEA1 LCD Driver"); |