diff options
Diffstat (limited to 'drivers/video/xilinxfb.c')
-rw-r--r-- | drivers/video/xilinxfb.c | 290 |
1 files changed, 151 insertions, 139 deletions
diff --git a/drivers/video/xilinxfb.c b/drivers/video/xilinxfb.c index 40a3a2afbfe..7a868bd16e0 100644 --- a/drivers/video/xilinxfb.c +++ b/drivers/video/xilinxfb.c @@ -1,13 +1,12 @@ /* - * xilinxfb.c - * - * Xilinx TFT LCD frame buffer driver + * Xilinx TFT frame buffer driver * * Author: MontaVista Software, Inc. * source@mvista.com * * 2002-2007 (c) MontaVista Software, Inc. * 2007 (c) Secret Lab Technologies, Ltd. + * 2009 (c) Xilinx Inc. * * This file is licensed under the terms of the GNU General Public License * version 2. This program is licensed "as is" without any warranty of any @@ -24,33 +23,38 @@ #include <linux/device.h> #include <linux/module.h> #include <linux/kernel.h> +#include <linux/version.h> #include <linux/errno.h> #include <linux/string.h> #include <linux/mm.h> #include <linux/fb.h> #include <linux/init.h> #include <linux/dma-mapping.h> -#include <linux/platform_device.h> -#if defined(CONFIG_OF) #include <linux/of_device.h> #include <linux/of_platform.h> -#endif -#include <asm/io.h> +#include <linux/io.h> #include <linux/xilinxfb.h> +#include <asm/dcr.h> #define DRIVER_NAME "xilinxfb" -#define DRIVER_DESCRIPTION "Xilinx TFT LCD frame buffer driver" + /* * Xilinx calls it "PLB TFT LCD Controller" though it can also be used for - * the VGA port on the Xilinx ML40x board. This is a hardware display controller - * for a 640x480 resolution TFT or VGA screen. + * the VGA port on the Xilinx ML40x board. This is a hardware display + * controller for a 640x480 resolution TFT or VGA screen. * * The interface to the framebuffer is nice and simple. There are two * control registers. The first tells the LCD interface where in memory * the frame buffer is (only the 11 most significant bits are used, so * don't start thinking about scrolling). The second allows the LCD to * be turned on or off as well as rotated 180 degrees. + * + * In case of direct PLB access the second control register will be at + * an offset of 4 as compared to the DCR access where the offset is 1 + * i.e. REG_CTRL. So this is taken care in the function + * xilinx_fb_out_be32 where it left shifts the offset 2 times in case of + * direct PLB access. */ #define NUM_REGS 2 #define REG_FB_ADDR 0 @@ -107,17 +111,28 @@ static struct fb_var_screeninfo xilinx_fb_var = { .activate = FB_ACTIVATE_NOW }; + +#define PLB_ACCESS_FLAG 0x1 /* 1 = PLB, 0 = DCR */ + struct xilinxfb_drvdata { struct fb_info info; /* FB driver info record */ - u32 regs_phys; /* phys. address of the control registers */ - u32 __iomem *regs; /* virt. address of the control registers */ + phys_addr_t regs_phys; /* phys. address of the control + registers */ + void __iomem *regs; /* virt. address of the control + registers */ + + dcr_host_t dcr_host; + unsigned int dcr_start; + unsigned int dcr_len; void *fb_virt; /* virt. address of the frame buffer */ dma_addr_t fb_phys; /* phys. address of the frame buffer */ int fb_alloced; /* Flag, was the fb memory alloced? */ + u8 flags; /* features of the driver */ + u32 reg_ctrl_default; u32 pseudo_palette[PALETTE_ENTRIES_NO]; @@ -128,14 +143,19 @@ struct xilinxfb_drvdata { container_of(_info, struct xilinxfb_drvdata, info) /* - * The LCD controller has DCR interface to its registers, but all - * the boards and configurations the driver has been tested with - * use opb2dcr bridge. So the registers are seen as memory mapped. - * This macro is to make it simple to add the direct DCR access - * when it's needed. + * The XPS TFT Controller can be accessed through PLB or DCR interface. + * To perform the read/write on the registers we need to check on + * which bus its connected and call the appropriate write API. */ -#define xilinx_fb_out_be32(driverdata, offset, val) \ - out_be32(driverdata->regs + offset, val) +static void xilinx_fb_out_be32(struct xilinxfb_drvdata *drvdata, u32 offset, + u32 val) +{ + if (drvdata->flags & PLB_ACCESS_FLAG) + out_be32(drvdata->regs + (offset << 2), val); + else + dcr_write(drvdata->dcr_host, offset, val); + +} static int xilinx_fb_setcolreg(unsigned regno, unsigned red, unsigned green, unsigned blue, @@ -203,35 +223,34 @@ static struct fb_ops xilinxfb_ops = * Bus independent setup/teardown */ -static int xilinxfb_assign(struct device *dev, unsigned long physaddr, +static int xilinxfb_assign(struct device *dev, + struct xilinxfb_drvdata *drvdata, + unsigned long physaddr, struct xilinxfb_platform_data *pdata) { - struct xilinxfb_drvdata *drvdata; int rc; int fbsize = pdata->xvirt * pdata->yvirt * BYTES_PER_PIXEL; - /* Allocate the driver data region */ - drvdata = kzalloc(sizeof(*drvdata), GFP_KERNEL); - if (!drvdata) { - dev_err(dev, "Couldn't allocate device private record\n"); - return -ENOMEM; - } - dev_set_drvdata(dev, drvdata); - - /* Map the control registers in */ - if (!request_mem_region(physaddr, 8, DRIVER_NAME)) { - dev_err(dev, "Couldn't lock memory region at 0x%08lX\n", - physaddr); - rc = -ENODEV; - goto err_region; - } - drvdata->regs_phys = physaddr; - drvdata->regs = ioremap(physaddr, 8); - if (!drvdata->regs) { - dev_err(dev, "Couldn't lock memory region at 0x%08lX\n", - physaddr); - rc = -ENODEV; - goto err_map; + if (drvdata->flags & PLB_ACCESS_FLAG) { + /* + * Map the control registers in if the controller + * is on direct PLB interface. + */ + if (!request_mem_region(physaddr, 8, DRIVER_NAME)) { + dev_err(dev, "Couldn't lock memory region at 0x%08lX\n", + physaddr); + rc = -ENODEV; + goto err_region; + } + + drvdata->regs_phys = physaddr; + drvdata->regs = ioremap(physaddr, 8); + if (!drvdata->regs) { + dev_err(dev, "Couldn't lock memory region at 0x%08lX\n", + physaddr); + rc = -ENODEV; + goto err_map; + } } /* Allocate the framebuffer memory */ @@ -247,7 +266,10 @@ static int xilinxfb_assign(struct device *dev, unsigned long physaddr, if (!drvdata->fb_virt) { dev_err(dev, "Could not allocate frame buffer memory\n"); rc = -ENOMEM; - goto err_fbmem; + if (drvdata->flags & PLB_ACCESS_FLAG) + goto err_fbmem; + else + goto err_region; } /* Clear (turn to black) the framebuffer */ @@ -260,7 +282,8 @@ static int xilinxfb_assign(struct device *dev, unsigned long physaddr, drvdata->reg_ctrl_default = REG_CTRL_ENABLE; if (pdata->rotate_screen) drvdata->reg_ctrl_default |= REG_CTRL_ROTATE; - xilinx_fb_out_be32(drvdata, REG_CTRL, drvdata->reg_ctrl_default); + xilinx_fb_out_be32(drvdata, REG_CTRL, + drvdata->reg_ctrl_default); /* Fill struct fb_info */ drvdata->info.device = dev; @@ -296,11 +319,14 @@ static int xilinxfb_assign(struct device *dev, unsigned long physaddr, goto err_regfb; } + if (drvdata->flags & PLB_ACCESS_FLAG) { + /* Put a banner in the log (for DEBUG) */ + dev_dbg(dev, "regs: phys=%lx, virt=%p\n", physaddr, + drvdata->regs); + } /* Put a banner in the log (for DEBUG) */ - dev_dbg(dev, "regs: phys=%lx, virt=%p\n", physaddr, drvdata->regs); - dev_dbg(dev, "fb: phys=%llx, virt=%p, size=%x\n", - (unsigned long long) drvdata->fb_phys, drvdata->fb_virt, - fbsize); + dev_dbg(dev, "fb: phys=%p, virt=%p, size=%x\n", + (void *)drvdata->fb_phys, drvdata->fb_virt, fbsize); return 0; /* success */ @@ -311,14 +337,19 @@ err_cmap: if (drvdata->fb_alloced) dma_free_coherent(dev, PAGE_ALIGN(fbsize), drvdata->fb_virt, drvdata->fb_phys); + else + iounmap(drvdata->fb_virt); + /* Turn off the display */ xilinx_fb_out_be32(drvdata, REG_CTRL, 0); err_fbmem: - iounmap(drvdata->regs); + if (drvdata->flags & PLB_ACCESS_FLAG) + iounmap(drvdata->regs); err_map: - release_mem_region(physaddr, 8); + if (drvdata->flags & PLB_ACCESS_FLAG) + release_mem_region(physaddr, 8); err_region: kfree(drvdata); @@ -342,12 +373,18 @@ static int xilinxfb_release(struct device *dev) if (drvdata->fb_alloced) dma_free_coherent(dev, PAGE_ALIGN(drvdata->info.fix.smem_len), drvdata->fb_virt, drvdata->fb_phys); + else + iounmap(drvdata->fb_virt); /* Turn off the display */ xilinx_fb_out_be32(drvdata, REG_CTRL, 0); - iounmap(drvdata->regs); - release_mem_region(drvdata->regs_phys, 8); + /* Release the resources, as allocated based on interface */ + if (drvdata->flags & PLB_ACCESS_FLAG) { + iounmap(drvdata->regs); + release_mem_region(drvdata->regs_phys, 8); + } else + dcr_unmap(drvdata->dcr_host, drvdata->dcr_len); kfree(drvdata); dev_set_drvdata(dev, NULL); @@ -356,77 +393,57 @@ static int xilinxfb_release(struct device *dev) } /* --------------------------------------------------------------------- - * Platform bus binding - */ - -static int -xilinxfb_platform_probe(struct platform_device *pdev) -{ - struct xilinxfb_platform_data *pdata; - struct resource *res; - - /* Find the registers address */ - res = platform_get_resource(pdev, IORESOURCE_IO, 0); - if (!res) { - dev_err(&pdev->dev, "Couldn't get registers resource\n"); - return -ENODEV; - } - - /* If a pdata structure is provided, then extract the parameters */ - pdata = &xilinx_fb_default_pdata; - if (pdev->dev.platform_data) { - pdata = pdev->dev.platform_data; - if (!pdata->xres) - pdata->xres = xilinx_fb_default_pdata.xres; - if (!pdata->yres) - pdata->yres = xilinx_fb_default_pdata.yres; - if (!pdata->xvirt) - pdata->xvirt = xilinx_fb_default_pdata.xvirt; - if (!pdata->yvirt) - pdata->yvirt = xilinx_fb_default_pdata.yvirt; - } - - return xilinxfb_assign(&pdev->dev, res->start, pdata); -} - -static int -xilinxfb_platform_remove(struct platform_device *pdev) -{ - return xilinxfb_release(&pdev->dev); -} - - -static struct platform_driver xilinxfb_platform_driver = { - .probe = xilinxfb_platform_probe, - .remove = xilinxfb_platform_remove, - .driver = { - .owner = THIS_MODULE, - .name = DRIVER_NAME, - }, -}; - -/* --------------------------------------------------------------------- * OF bus binding */ -#if defined(CONFIG_OF) static int __devinit xilinxfb_of_probe(struct of_device *op, const struct of_device_id *match) { - struct resource res; const u32 *prop; + u32 *p; + u32 tft_access; struct xilinxfb_platform_data pdata; + struct resource res; int size, rc; + int start = 0, len = 0; + dcr_host_t dcr_host; + struct xilinxfb_drvdata *drvdata; /* Copy with the default pdata (not a ptr reference!) */ pdata = xilinx_fb_default_pdata; dev_dbg(&op->dev, "xilinxfb_of_probe(%p, %p)\n", op, match); - rc = of_address_to_resource(op->node, 0, &res); - if (rc) { - dev_err(&op->dev, "invalid address\n"); - return rc; + /* + * To check whether the core is connected directly to DCR or PLB + * interface and initialize the tft_access accordingly. + */ + p = (u32 *)of_get_property(op->node, "xlnx,dcr-splb-slave-if", NULL); + + if (p) + tft_access = *p; + else + tft_access = 0; /* For backward compatibility */ + + /* + * Fill the resource structure if its direct PLB interface + * otherwise fill the dcr_host structure. + */ + if (tft_access) { + rc = of_address_to_resource(op->node, 0, &res); + if (rc) { + dev_err(&op->dev, "invalid address\n"); + return -ENODEV; + } + + } else { + start = dcr_resource_start(op->node, 0); + len = dcr_resource_len(op->node, 0); + dcr_host = dcr_map(op->node, start, len); + if (!DCR_MAP_OK(dcr_host)) { + dev_err(&op->dev, "invalid address\n"); + return -ENODEV; + } } prop = of_get_property(op->node, "phys-size", &size); @@ -450,7 +467,26 @@ xilinxfb_of_probe(struct of_device *op, const struct of_device_id *match) if (of_find_property(op->node, "rotate-display", NULL)) pdata.rotate_screen = 1; - return xilinxfb_assign(&op->dev, res.start, &pdata); + /* Allocate the driver data region */ + drvdata = kzalloc(sizeof(*drvdata), GFP_KERNEL); + if (!drvdata) { + dev_err(&op->dev, "Couldn't allocate device private record\n"); + return -ENOMEM; + } + dev_set_drvdata(&op->dev, drvdata); + + if (tft_access) + drvdata->flags |= PLB_ACCESS_FLAG; + + /* Arguments are passed based on the interface */ + if (drvdata->flags & PLB_ACCESS_FLAG) { + return xilinxfb_assign(&op->dev, drvdata, res.start, &pdata); + } else { + drvdata->dcr_start = start; + drvdata->dcr_len = len; + drvdata->dcr_host = dcr_host; + return xilinxfb_assign(&op->dev, drvdata, 0, &pdata); + } } static int __devexit xilinxfb_of_remove(struct of_device *op) @@ -460,7 +496,9 @@ static int __devexit xilinxfb_of_remove(struct of_device *op) /* Match table for of_platform binding */ static struct of_device_id xilinxfb_of_match[] __devinitdata = { + { .compatible = "xlnx,xps-tft-1.00.a", }, { .compatible = "xlnx,plb-tft-cntlr-ref-1.00.a", }, + { .compatible = "xlnx,plb-dvi-cntlr-ref-1.00.c", }, {}, }; MODULE_DEVICE_TABLE(of, xilinxfb_of_match); @@ -476,22 +514,6 @@ static struct of_platform_driver xilinxfb_of_driver = { }, }; -/* Registration helpers to keep the number of #ifdefs to a minimum */ -static inline int __init xilinxfb_of_register(void) -{ - pr_debug("xilinxfb: calling of_register_platform_driver()\n"); - return of_register_platform_driver(&xilinxfb_of_driver); -} - -static inline void __exit xilinxfb_of_unregister(void) -{ - of_unregister_platform_driver(&xilinxfb_of_driver); -} -#else /* CONFIG_OF */ -/* CONFIG_OF not enabled; do nothing helpers */ -static inline int __init xilinxfb_of_register(void) { return 0; } -static inline void __exit xilinxfb_of_unregister(void) { } -#endif /* CONFIG_OF */ /* --------------------------------------------------------------------- * Module setup and teardown @@ -500,28 +522,18 @@ static inline void __exit xilinxfb_of_unregister(void) { } static int __init xilinxfb_init(void) { - int rc; - rc = xilinxfb_of_register(); - if (rc) - return rc; - - rc = platform_driver_register(&xilinxfb_platform_driver); - if (rc) - xilinxfb_of_unregister(); - - return rc; + return of_register_platform_driver(&xilinxfb_of_driver); } static void __exit xilinxfb_cleanup(void) { - platform_driver_unregister(&xilinxfb_platform_driver); - xilinxfb_of_unregister(); + of_unregister_platform_driver(&xilinxfb_of_driver); } module_init(xilinxfb_init); module_exit(xilinxfb_cleanup); MODULE_AUTHOR("MontaVista Software, Inc. <source@mvista.com>"); -MODULE_DESCRIPTION(DRIVER_DESCRIPTION); +MODULE_DESCRIPTION("Xilinx TFT frame buffer driver"); MODULE_LICENSE("GPL"); |