summaryrefslogtreecommitdiffstats
path: root/drivers/video
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/video')
-rw-r--r--drivers/video/au1100fb.c92
-rw-r--r--drivers/video/cg6.c5
-rw-r--r--drivers/video/console/fbcon.c14
-rw-r--r--drivers/video/console/newport_con.c3
-rw-r--r--drivers/video/imsttfb.c2
-rw-r--r--drivers/video/matrox/g450_pll.c23
-rw-r--r--drivers/video/matrox/matroxfb_DAC1064.h15
-rw-r--r--drivers/video/matrox/matroxfb_base.h1
-rw-r--r--drivers/video/matrox/matroxfb_misc.c1
-rw-r--r--drivers/video/pvr2fb.c16
-rw-r--r--drivers/video/pxafb.c2
-rw-r--r--drivers/video/stifb.c19
12 files changed, 119 insertions, 74 deletions
diff --git a/drivers/video/au1100fb.c b/drivers/video/au1100fb.c
index 80a81eccad3..832e4613673 100644
--- a/drivers/video/au1100fb.c
+++ b/drivers/video/au1100fb.c
@@ -115,6 +115,52 @@ static int nocursor = 0;
module_param(nocursor, int, 0644);
MODULE_PARM_DESC(nocursor, "cursor enable/disable");
+/* fb_blank
+ * Blank the screen. Depending on the mode, the screen will be
+ * activated with the backlight color, or desactivated
+ */
+static int au1100fb_fb_blank(int blank_mode, struct fb_info *fbi)
+{
+ struct au1100fb_device *fbdev = to_au1100fb_device(fbi);
+
+ print_dbg("fb_blank %d %p", blank_mode, fbi);
+
+ switch (blank_mode) {
+
+ case VESA_NO_BLANKING:
+ /* Turn on panel */
+ fbdev->regs->lcd_control |= LCD_CONTROL_GO;
+#ifdef CONFIG_MIPS_PB1100
+ if (drv_info.panel_idx == 1) {
+ au_writew(au_readw(PB1100_G_CONTROL)
+ | (PB1100_G_CONTROL_BL | PB1100_G_CONTROL_VDD),
+ PB1100_G_CONTROL);
+ }
+#endif
+ au_sync();
+ break;
+
+ case VESA_VSYNC_SUSPEND:
+ case VESA_HSYNC_SUSPEND:
+ case VESA_POWERDOWN:
+ /* Turn off panel */
+ fbdev->regs->lcd_control &= ~LCD_CONTROL_GO;
+#ifdef CONFIG_MIPS_PB1100
+ if (drv_info.panel_idx == 1) {
+ au_writew(au_readw(PB1100_G_CONTROL)
+ & ~(PB1100_G_CONTROL_BL | PB1100_G_CONTROL_VDD),
+ PB1100_G_CONTROL);
+ }
+#endif
+ au_sync();
+ break;
+ default:
+ break;
+
+ }
+ return 0;
+}
+
/*
* Set hardware with var settings. This will enable the controller with a specific
* mode, normally validated with the fb_check_var method
@@ -272,52 +318,6 @@ int au1100fb_fb_setcolreg(unsigned regno, unsigned red, unsigned green, unsigned
return 0;
}
-/* fb_blank
- * Blank the screen. Depending on the mode, the screen will be
- * activated with the backlight color, or desactivated
- */
-int au1100fb_fb_blank(int blank_mode, struct fb_info *fbi)
-{
- struct au1100fb_device *fbdev = to_au1100fb_device(fbi);
-
- print_dbg("fb_blank %d %p", blank_mode, fbi);
-
- switch (blank_mode) {
-
- case VESA_NO_BLANKING:
- /* Turn on panel */
- fbdev->regs->lcd_control |= LCD_CONTROL_GO;
-#ifdef CONFIG_MIPS_PB1100
- if (drv_info.panel_idx == 1) {
- au_writew(au_readw(PB1100_G_CONTROL)
- | (PB1100_G_CONTROL_BL | PB1100_G_CONTROL_VDD),
- PB1100_G_CONTROL);
- }
-#endif
- au_sync();
- break;
-
- case VESA_VSYNC_SUSPEND:
- case VESA_HSYNC_SUSPEND:
- case VESA_POWERDOWN:
- /* Turn off panel */
- fbdev->regs->lcd_control &= ~LCD_CONTROL_GO;
-#ifdef CONFIG_MIPS_PB1100
- if (drv_info.panel_idx == 1) {
- au_writew(au_readw(PB1100_G_CONTROL)
- & ~(PB1100_G_CONTROL_BL | PB1100_G_CONTROL_VDD),
- PB1100_G_CONTROL);
- }
-#endif
- au_sync();
- break;
- default:
- break;
-
- }
- return 0;
-}
-
/* fb_pan_display
* Pan display in x and/or y as specified
*/
diff --git a/drivers/video/cg6.c b/drivers/video/cg6.c
index 87c74712353..ee9046db9c7 100644
--- a/drivers/video/cg6.c
+++ b/drivers/video/cg6.c
@@ -677,6 +677,7 @@ static int __devinit cg6_probe(struct of_device *op, const struct of_device_id *
struct fb_info *info;
struct cg6_par *par;
int linebytes, err;
+ int dblbuf;
info = framebuffer_alloc(sizeof(struct cg6_par), &op->dev);
@@ -698,7 +699,9 @@ static int __devinit cg6_probe(struct of_device *op, const struct of_device_id *
linebytes = of_getintprop_default(dp, "linebytes",
info->var.xres);
par->fbsize = PAGE_ALIGN(linebytes * info->var.yres);
- if (of_find_property(dp, "dblbuf", NULL))
+
+ dblbuf = of_getintprop_default(dp, "dblbuf", 0);
+ if (dblbuf)
par->fbsize *= 4;
par->fbc = of_ioremap(&op->resource[0], CG6_FBC_OFFSET,
diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c
index decfdc8eb9c..e58c87b3e3a 100644
--- a/drivers/video/console/fbcon.c
+++ b/drivers/video/console/fbcon.c
@@ -127,8 +127,20 @@ static int last_fb_vc = MAX_NR_CONSOLES - 1;
static int fbcon_is_default = 1;
static int fbcon_has_exited;
static int primary_device = -1;
+
+#ifdef CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY
static int map_override;
+static inline void fbcon_map_override(void)
+{
+ map_override = 1;
+}
+#else
+static inline void fbcon_map_override(void)
+{
+}
+#endif /* CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY */
+
/* font data */
static char fontname[40];
@@ -506,7 +518,7 @@ static int __init fb_console_setup(char *this_opt)
(options[j++]-'0') % FB_MAX;
}
- map_override = 1;
+ fbcon_map_override();
}
return 1;
diff --git a/drivers/video/console/newport_con.c b/drivers/video/console/newport_con.c
index 7fa1afeae8d..dda0586ab3f 100644
--- a/drivers/video/console/newport_con.c
+++ b/drivers/video/console/newport_con.c
@@ -738,9 +738,8 @@ const struct consw newport_con = {
#ifdef MODULE
static int __init newport_console_init(void)
{
-
if (!sgi_gfxaddr)
- return NULL;
+ return 0;
if (!npregs)
npregs = (struct newport_regs *)/* ioremap cannot fail */
diff --git a/drivers/video/imsttfb.c b/drivers/video/imsttfb.c
index 5715b8ad0dd..94f4511023d 100644
--- a/drivers/video/imsttfb.c
+++ b/drivers/video/imsttfb.c
@@ -1391,7 +1391,7 @@ init_imstt(struct fb_info *info)
}
}
-#if USE_NV_MODES && defined(CONFIG_PPC)
+#if USE_NV_MODES && defined(CONFIG_PPC32)
{
int vmode = init_vmode, cmode = init_cmode;
diff --git a/drivers/video/matrox/g450_pll.c b/drivers/video/matrox/g450_pll.c
index 7c76e079ca7..d42346e7fdd 100644
--- a/drivers/video/matrox/g450_pll.c
+++ b/drivers/video/matrox/g450_pll.c
@@ -331,16 +331,19 @@ static int __g450_setclk(WPMINFO unsigned int fout, unsigned int pll,
tmp |= M1064_XPIXCLKCTRL_PLL_UP;
}
matroxfb_DAC_out(PMINFO M1064_XPIXCLKCTRL, tmp);
-#ifdef __powerpc__
- /* This is necessary to avoid jitter on PowerPC
- * (OpenFirmware) systems, but apparently
- * introduces jitter, at least on a x86-64
- * using DVI.
- * A simple workaround is disable for non-PPC.
- */
- matroxfb_DAC_out(PMINFO M1064_XDVICLKCTRL, 0);
-#endif /* __powerpc__ */
- matroxfb_DAC_out(PMINFO M1064_XPWRCTRL, xpwrctrl);
+ /* DVI PLL preferred for frequencies up to
+ panel link max, standard PLL otherwise */
+ if (fout >= MINFO->max_pixel_clock_panellink)
+ tmp = 0;
+ else tmp =
+ M1064_XDVICLKCTRL_DVIDATAPATHSEL |
+ M1064_XDVICLKCTRL_C1DVICLKSEL |
+ M1064_XDVICLKCTRL_C1DVICLKEN |
+ M1064_XDVICLKCTRL_DVILOOPCTL |
+ M1064_XDVICLKCTRL_P1LOOPBWDTCTL;
+ matroxfb_DAC_out(PMINFO M1064_XDVICLKCTRL,tmp);
+ matroxfb_DAC_out(PMINFO M1064_XPWRCTRL,
+ xpwrctrl);
matroxfb_DAC_unlock_irqrestore(flags);
}
diff --git a/drivers/video/matrox/matroxfb_DAC1064.h b/drivers/video/matrox/matroxfb_DAC1064.h
index df39c319373..7a98ce8043d 100644
--- a/drivers/video/matrox/matroxfb_DAC1064.h
+++ b/drivers/video/matrox/matroxfb_DAC1064.h
@@ -33,6 +33,21 @@ void DAC1064_global_restore(WPMINFO2);
#define M1064_XCURCTRL_3COLOR 0x01 /* transparent, 0, 1, 2 */
#define M1064_XCURCTRL_XGA 0x02 /* 0, 1, transparent, complement */
#define M1064_XCURCTRL_XWIN 0x03 /* transparent, transparent, 0, 1 */
+ /* drive DVI by standard(0)/DVI(1) PLL */
+ /* if set(1), C?DVICLKEN and C?DVICLKSEL must be set(1) */
+#define M1064_XDVICLKCTRL_DVIDATAPATHSEL 0x01
+ /* drive CRTC1 by standard(0)/DVI(1) PLL */
+#define M1064_XDVICLKCTRL_C1DVICLKSEL 0x02
+ /* drive CRTC2 by standard(0)/DVI(1) PLL */
+#define M1064_XDVICLKCTRL_C2DVICLKSEL 0x04
+ /* pixel clock allowed to(0)/blocked from(1) driving CRTC1 */
+#define M1064_XDVICLKCTRL_C1DVICLKEN 0x08
+ /* DVI PLL loop filter bandwidth selection bits */
+#define M1064_XDVICLKCTRL_DVILOOPCTL 0x30
+ /* CRTC2 pixel clock allowed to(0)/blocked from(1) driving CRTC2 */
+#define M1064_XDVICLKCTRL_C2DVICLKEN 0x40
+ /* P1PLL loop filter bandwith selection */
+#define M1064_XDVICLKCTRL_P1LOOPBWDTCTL 0x80
#define M1064_XCURCOL0RED 0x08
#define M1064_XCURCOL0GREEN 0x09
#define M1064_XCURCOL0BLUE 0x0A
diff --git a/drivers/video/matrox/matroxfb_base.h b/drivers/video/matrox/matroxfb_base.h
index d59577c8de8..f3107ad7e54 100644
--- a/drivers/video/matrox/matroxfb_base.h
+++ b/drivers/video/matrox/matroxfb_base.h
@@ -424,6 +424,7 @@ struct matrox_fb_info {
} mmio;
unsigned int max_pixel_clock;
+ unsigned int max_pixel_clock_panellink;
struct matrox_switch* hw_switch;
diff --git a/drivers/video/matrox/matroxfb_misc.c b/drivers/video/matrox/matroxfb_misc.c
index 5948e54b9ef..ab7fb50bc1d 100644
--- a/drivers/video/matrox/matroxfb_misc.c
+++ b/drivers/video/matrox/matroxfb_misc.c
@@ -658,6 +658,7 @@ static int parse_pins5(WPMINFO const struct matrox_bios* bd) {
MINFO->values.reg.mctlwtst_core = (MINFO->values.reg.mctlwtst & ~7) |
wtst_xlat[MINFO->values.reg.mctlwtst & 7];
}
+ MINFO->max_pixel_clock_panellink = bd->pins[47] * 4000;
return 0;
}
diff --git a/drivers/video/pvr2fb.c b/drivers/video/pvr2fb.c
index f9300266044..7d6c29800d1 100644
--- a/drivers/video/pvr2fb.c
+++ b/drivers/video/pvr2fb.c
@@ -94,6 +94,7 @@
#define DISP_DIWCONF (DISP_BASE + 0xe8)
#define DISP_DIWHSTRT (DISP_BASE + 0xec)
#define DISP_DIWVSTRT (DISP_BASE + 0xf0)
+#define DISP_PIXDEPTH (DISP_BASE + 0x108)
/* Pixel clocks, one for TV output, doubled for VGA output */
#define TV_CLK 74239
@@ -143,6 +144,7 @@ static struct pvr2fb_par {
unsigned char is_lowres; /* Is horizontal pixel-doubling enabled? */
unsigned long mmio_base; /* MMIO base */
+ u32 palette[16];
} *currentpar;
static struct fb_info *fb_info;
@@ -599,6 +601,7 @@ static void pvr2_init_display(struct fb_info *info)
/* bits per pixel */
fb_writel(fb_readl(DISP_DIWMODE) | (--bytesperpixel << 2), DISP_DIWMODE);
+ fb_writel(bytesperpixel << 2, DISP_PIXDEPTH);
/* video enable, color sync, interlace,
* hsync and vsync polarity (currently unused) */
@@ -790,7 +793,7 @@ static int __devinit pvr2fb_common_init(void)
fb_info->fbops = &pvr2fb_ops;
fb_info->fix = pvr2_fix;
fb_info->par = currentpar;
- fb_info->pseudo_palette = (void *)(fb_info->par + 1);
+ fb_info->pseudo_palette = currentpar->palette;
fb_info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN;
if (video_output == VO_VGA)
@@ -807,6 +810,8 @@ static int __devinit pvr2fb_common_init(void)
if (register_framebuffer(fb_info) < 0)
goto out_err;
+ /*Must write PIXDEPTH to register before anything is displayed - so force init */
+ pvr2_init_display(fb_info);
modememused = get_line_length(fb_info->var.xres_virtual,
fb_info->var.bits_per_pixel);
@@ -1082,14 +1087,15 @@ static int __init pvr2fb_init(void)
#endif
size = sizeof(struct fb_info) + sizeof(struct pvr2fb_par) + 16 * sizeof(u32);
- fb_info = kzalloc(size, GFP_KERNEL);
+ fb_info = framebuffer_alloc(sizeof(struct pvr2fb_par), NULL);
+
if (!fb_info) {
printk(KERN_ERR "Failed to allocate memory for fb_info\n");
return -ENOMEM;
}
- currentpar = (struct pvr2fb_par *)(fb_info + 1);
+ currentpar = fb_info->par;
for (i = 0; i < ARRAY_SIZE(board_driver); i++) {
struct pvr2_board *pvr_board = board_driver + i;
@@ -1102,7 +1108,7 @@ static int __init pvr2fb_init(void)
if (ret != 0) {
printk(KERN_ERR "pvr2fb: Failed init of %s device\n",
pvr_board->name);
- kfree(fb_info);
+ framebuffer_release(fb_info);
break;
}
}
@@ -1126,7 +1132,7 @@ static void __exit pvr2fb_exit(void)
#endif
unregister_framebuffer(fb_info);
- kfree(fb_info);
+ framebuffer_release(fb_info);
}
module_init(pvr2fb_init);
diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c
index 81e571d59b5..a280a52f8ef 100644
--- a/drivers/video/pxafb.c
+++ b/drivers/video/pxafb.c
@@ -66,7 +66,7 @@ static void set_ctrlr_state(struct pxafb_info *fbi, u_int state);
#ifdef CONFIG_FB_PXA_PARAMETERS
#define PXAFB_OPTIONS_SIZE 256
-static char g_options[PXAFB_OPTIONS_SIZE] __initdata = "";
+static char g_options[PXAFB_OPTIONS_SIZE] __devinitdata = "";
#endif
static inline void pxafb_schedule_work(struct pxafb_info *fbi, u_int state)
diff --git a/drivers/video/stifb.c b/drivers/video/stifb.c
index c97709ecbad..e7c8db2eb49 100644
--- a/drivers/video/stifb.c
+++ b/drivers/video/stifb.c
@@ -1100,13 +1100,18 @@ stifb_init_fb(struct sti_struct *sti, int bpp_pref)
/* only supported cards are allowed */
switch (fb->id) {
case CRT_ID_VISUALIZE_EG:
- /* look for a double buffering device like e.g. the
- "INTERNAL_EG_DX1024" in the RDI precisionbook laptop
- which won't work. The same device in non-double
- buffering mode returns "INTERNAL_EG_X1024". */
- if (strstr(sti->outptr.dev_name, "EG_DX")) {
- printk(KERN_WARNING
- "stifb: ignoring '%s'. Disable double buffering in IPL menu.\n",
+ /* Visualize cards can run either in "double buffer" or
+ "standard" mode. Depending on the mode, the card reports
+ a different device name, e.g. "INTERNAL_EG_DX1024" in double
+ buffer mode and "INTERNAL_EG_X1024" in standard mode.
+ Since this driver only supports standard mode, we check
+ if the device name contains the string "DX" and tell the
+ user how to reconfigure the card. */
+ if (strstr(sti->outptr.dev_name, "DX")) {
+ printk(KERN_WARNING "WARNING: stifb framebuffer driver does not "
+ "support '%s' in double-buffer mode.\n"
+ KERN_WARNING "WARNING: Please disable the double-buffer mode "
+ "in IPL menu (the PARISC-BIOS).\n",
sti->outptr.dev_name);
goto out_err0;
}
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-01-13 16:22:27 +0000