summaryrefslogtreecommitdiffstats
path: root/drivers/video
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/video')
-rw-r--r--drivers/video/Kconfig27
-rw-r--r--drivers/video/Makefile2
-rw-r--r--drivers/video/aty/atyfb_base.c64
-rw-r--r--drivers/video/bf54x-lq043fb.c8
-rw-r--r--drivers/video/bfin-t350mcqb-fb.c677
-rw-r--r--drivers/video/cg14.c1
-rw-r--r--drivers/video/chipsfb.c2
-rw-r--r--drivers/video/fb_defio.c22
-rw-r--r--drivers/video/fbmem.c1
-rw-r--r--drivers/video/hitfb.c4
-rw-r--r--drivers/video/i810/i810_main.c2
-rw-r--r--drivers/video/mbx/mbxfb.c2
-rw-r--r--drivers/video/metronomefb.c999
-rw-r--r--drivers/video/nvidia/nvidia.c2
-rw-r--r--drivers/video/pvr2fb.c12
-rw-r--r--drivers/video/pxafb.c9
-rw-r--r--drivers/video/sbuslib.c1
-rw-r--r--drivers/video/sm501fb.c20
-rw-r--r--drivers/video/stifb.c22
-rw-r--r--drivers/video/tridentfb.c55
-rw-r--r--drivers/video/uvesafb.c2
21 files changed, 1813 insertions, 121 deletions
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 758435f8a6f..1bd5fb30237 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -553,6 +553,19 @@ config FB_BF54X_LQ043
help
This is the framebuffer device driver for a SHARP LQ043T1DG01 TFT LCD
+config FB_BFIN_T350MCQB
+ tristate "Varitronix COG-T350MCQB TFT LCD display (BF527 EZKIT)"
+ depends on FB && BLACKFIN
+ select BFIN_GPTIMERS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the framebuffer device driver for a Varitronix VL-PS-COG-T350MCQB-01 display TFT LCD
+ This display is a QVGA 320x240 24-bit RGB display interfaced by an 8-bit wide PPI
+ It uses PPI[0..7] PPI_FS1, PPI_FS2 and PPI_CLK.
+
+
config FB_STI
tristate "HP STI frame buffer device support"
depends on FB && PARISC
@@ -1880,6 +1893,20 @@ config FB_XILINX
framebuffer. ML300 carries a 640*480 LCD display on the board,
ML403 uses a standard DB15 VGA connector.
+config FB_METRONOME
+ tristate "Metronome display controller support"
+ depends on FB && ARCH_PXA && MMU
+ select FB_SYS_FILLRECT
+ select FB_SYS_COPYAREA
+ select FB_SYS_IMAGEBLIT
+ select FB_SYS_FOPS
+ select FB_DEFERRED_IO
+ help
+ This enables support for the Metronome display controller. Tested
+ with an E-Ink 800x600 display and Gumstix Connex through an AMLCD
+ interface. Please read <file:Documentation/fb/metronomefb.txt>
+ for more information.
+
config FB_VIRTUAL
tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)"
depends on FB
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 83e02b3429b..11c0e5e05f2 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -103,6 +103,7 @@ obj-$(CONFIG_FB_PMAG_AA) += pmag-aa-fb.o
obj-$(CONFIG_FB_PMAG_BA) += pmag-ba-fb.o
obj-$(CONFIG_FB_PMAGB_B) += pmagb-b-fb.o
obj-$(CONFIG_FB_MAXINE) += maxinefb.o
+obj-$(CONFIG_FB_METRONOME) += metronomefb.o
obj-$(CONFIG_FB_S1D13XXX) += s1d13xxxfb.o
obj-$(CONFIG_FB_IMX) += imxfb.o
obj-$(CONFIG_FB_S3C2410) += s3c2410fb.o
@@ -122,6 +123,7 @@ obj-$(CONFIG_FB_EFI) += efifb.o
obj-$(CONFIG_FB_VGA16) += vga16fb.o
obj-$(CONFIG_FB_OF) += offb.o
obj-$(CONFIG_FB_BF54X_LQ043) += bf54x-lq043fb.o
+obj-$(CONFIG_FB_BFIN_T350MCQB) += bfin-t350mcqb-fb.o
# the test framebuffer is last
obj-$(CONFIG_FB_VIRTUAL) += vfb.o
diff --git a/drivers/video/aty/atyfb_base.c b/drivers/video/aty/atyfb_base.c
index d775eb6590b..62f9c6e387c 100644
--- a/drivers/video/aty/atyfb_base.c
+++ b/drivers/video/aty/atyfb_base.c
@@ -1913,61 +1913,6 @@ static int atyfb_mmap(struct fb_info *info, struct vm_area_struct *vma)
par->mmaped = 1;
return 0;
}
-
-static struct {
- u32 yoffset;
- u8 r[2][256];
- u8 g[2][256];
- u8 b[2][256];
-} atyfb_save;
-
-static void atyfb_save_palette(struct atyfb_par *par, int enter)
-{
- int i, tmp;
-
- for (i = 0; i < 256; i++) {
- tmp = aty_ld_8(DAC_CNTL, par) & 0xfc;
- if (M64_HAS(EXTRA_BRIGHT))
- tmp |= 0x2;
- aty_st_8(DAC_CNTL, tmp, par);
- aty_st_8(DAC_MASK, 0xff, par);
-
- aty_st_8(DAC_R_INDEX, i, par);
- atyfb_save.r[enter][i] = aty_ld_8(DAC_DATA, par);
- atyfb_save.g[enter][i] = aty_ld_8(DAC_DATA, par);
- atyfb_save.b[enter][i] = aty_ld_8(DAC_DATA, par);
- aty_st_8(DAC_W_INDEX, i, par);
- aty_st_8(DAC_DATA, atyfb_save.r[1 - enter][i], par);
- aty_st_8(DAC_DATA, atyfb_save.g[1 - enter][i], par);
- aty_st_8(DAC_DATA, atyfb_save.b[1 - enter][i], par);
- }
-}
-
-static void atyfb_palette(int enter)
-{
- struct atyfb_par *par;
- struct fb_info *info;
- int i;
-
- for (i = 0; i < FB_MAX; i++) {
- info = registered_fb[i];
- if (info && info->fbops == &atyfb_ops) {
- par = (struct atyfb_par *) info->par;
-
- atyfb_save_palette(par, enter);
- if (enter) {
- atyfb_save.yoffset = info->var.yoffset;
- info->var.yoffset = 0;
- set_off_pitch(par, info);
- } else {
- info->var.yoffset = atyfb_save.yoffset;
- set_off_pitch(par, info);
- }
- aty_st_le32(CRTC_OFF_PITCH, par->crtc.off_pitch, par);
- break;
- }
- }
-}
#endif /* __sparc__ */
@@ -2670,10 +2615,6 @@ static int __devinit aty_init(struct fb_info *info)
goto aty_init_exit;
}
-#ifdef __sparc__
- atyfb_save_palette(par, 0);
-#endif
-
#ifdef CONFIG_FB_ATY_CT
if (!noaccel && M64_HAS(INTEGRATED))
aty_init_cursor(info);
@@ -2900,8 +2841,6 @@ static int atyfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
#ifdef __sparc__
-extern void (*prom_palette) (int);
-
static int __devinit atyfb_setup_sparc(struct pci_dev *pdev,
struct fb_info *info, unsigned long addr)
{
@@ -3536,9 +3475,6 @@ static int __devinit atyfb_pci_probe(struct pci_dev *pdev, const struct pci_devi
goto err_release_io;
#ifdef __sparc__
- if (!prom_palette)
- prom_palette = atyfb_palette;
-
/*
* Add /dev/fb mmap values.
*/
diff --git a/drivers/video/bf54x-lq043fb.c b/drivers/video/bf54x-lq043fb.c
index 0ce791e6f79..eefba3d0e4b 100644
--- a/drivers/video/bf54x-lq043fb.c
+++ b/drivers/video/bf54x-lq043fb.c
@@ -8,7 +8,7 @@
*
*
* Modified:
- * Copyright 2004-2007 Analog Devices Inc.
+ * Copyright 2007-2008 Analog Devices Inc.
*
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
@@ -241,7 +241,7 @@ static int request_ports(struct bfin_bf54xfb_info *fbi)
u16 eppi_req_18[] = EPPI0_18;
u16 disp = fbi->mach_info->disp;
- if (gpio_request(disp, NULL)) {
+ if (gpio_request(disp, DRIVER_NAME)) {
printk(KERN_ERR "Requesting GPIO %d faild\n", disp);
return -EFAULT;
}
@@ -384,7 +384,7 @@ static int bfin_bf54x_fb_mmap(struct fb_info *info, struct vm_area_struct *vma)
* Other flags can be set, and are documented in
* include/linux/mm.h
*/
- vma->vm_flags |= VM_MAYSHARE;
+ vma->vm_flags |= VM_MAYSHARE | VM_SHARED;
return 0;
}
@@ -672,7 +672,7 @@ static int __init bfin_bf54x_probe(struct platform_device *pdev)
&bfin_lq043fb_bl_ops);
bl_dev->props.max_brightness = 255;
- lcd_dev = lcd_device_register(DRIVER_NAME, NULL, &bfin_lcd_ops);
+ lcd_dev = lcd_device_register(DRIVER_NAME, &pdev->dev, NULL, &bfin_lcd_ops);
lcd_dev->props.max_contrast = 255, printk(KERN_INFO "Done.\n");
#endif
diff --git a/drivers/video/bfin-t350mcqb-fb.c b/drivers/video/bfin-t350mcqb-fb.c
new file mode 100644
index 00000000000..135d6dd7e67
--- /dev/null
+++ b/drivers/video/bfin-t350mcqb-fb.c
@@ -0,0 +1,677 @@
+/*
+ * File: drivers/video/bfin-t350mcqb-fb.c
+ * Based on:
+ * Author: Michael Hennerich <hennerich@blackfin.uclinux.org>
+ *
+ * Created:
+ * Description: Blackfin LCD Framebufer driver
+ *
+ *
+ * Modified:
+ * Copyright 2004-2007 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/backlight.h>
+#include <linux/lcd.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+
+#include <asm/blackfin.h>
+#include <asm/irq.h>
+#include <asm/dma-mapping.h>
+#include <asm/dma.h>
+#include <asm/portmux.h>
+#include <asm/gptimers.h>
+
+#define NO_BL_SUPPORT
+
+#define LCD_X_RES 320 /* Horizontal Resolution */
+#define LCD_Y_RES 240 /* Vertical Resolution */
+#define LCD_BPP 24 /* Bit Per Pixel */
+
+#define DMA_BUS_SIZE 16
+#define LCD_CLK (12*1000*1000) /* 12MHz */
+
+#define CLOCKS_PER_PIX 3
+
+ /*
+ * HS and VS timing parameters (all in number of PPI clk ticks)
+ */
+
+#define U_LINE 1 /* Blanking Lines */
+
+#define H_ACTPIX (LCD_X_RES * CLOCKS_PER_PIX) /* active horizontal pixel */
+#define H_PERIOD (408 * CLOCKS_PER_PIX) /* HS period */
+#define H_PULSE 90 /* HS pulse width */
+#define H_START 204 /* first valid pixel */
+
+#define V_LINES (LCD_Y_RES + U_LINE) /* total vertical lines */
+#define V_PULSE (3 * H_PERIOD) /* VS pulse width (1-5 H_PERIODs) */
+#define V_PERIOD (H_PERIOD * V_LINES) /* VS period */
+
+#define ACTIVE_VIDEO_MEM_OFFSET (U_LINE * H_ACTPIX)
+
+#define BFIN_LCD_NBR_PALETTE_ENTRIES 256
+
+#define DRIVER_NAME "bfin-t350mcqb"
+static char driver_name[] = DRIVER_NAME;
+
+struct bfin_t350mcqbfb_info {
+ struct fb_info *fb;
+ struct device *dev;
+ unsigned char *fb_buffer; /* RGB Buffer */
+ dma_addr_t dma_handle;
+ int lq043_mmap;
+ int lq043_open_cnt;
+ int irq;
+ spinlock_t lock; /* lock */
+ u32 pseudo_pal[16];
+};
+
+static int nocursor;
+module_param(nocursor, int, 0644);
+MODULE_PARM_DESC(nocursor, "cursor enable/disable");
+
+#define PPI_TX_MODE 0x2
+#define PPI_XFER_TYPE_11 0xC
+#define PPI_PORT_CFG_01 0x10
+#define PPI_PACK_EN 0x80
+#define PPI_POLS_1 0x8000
+
+static void bfin_t350mcqb_config_ppi(struct bfin_t350mcqbfb_info *fbi)
+{
+ bfin_write_PPI_DELAY(H_START);
+ bfin_write_PPI_COUNT(H_ACTPIX-1);
+ bfin_write_PPI_FRAME(V_LINES);
+
+ bfin_write_PPI_CONTROL(PPI_TX_MODE | /* output mode , PORT_DIR */
+ PPI_XFER_TYPE_11 | /* sync mode XFR_TYPE */
+ PPI_PORT_CFG_01 | /* two frame sync PORT_CFG */
+ PPI_PACK_EN | /* packing enabled PACK_EN */
+ PPI_POLS_1); /* faling edge syncs POLS */
+}
+
+static inline void bfin_t350mcqb_disable_ppi(void)
+{
+ bfin_write_PPI_CONTROL(bfin_read_PPI_CONTROL() & ~PORT_EN);
+}
+
+static inline void bfin_t350mcqb_enable_ppi(void)
+{
+ bfin_write_PPI_CONTROL(bfin_read_PPI_CONTROL() | PORT_EN);
+}
+
+static void bfin_t350mcqb_start_timers(void)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ enable_gptimers(TIMER1bit);
+ enable_gptimers(TIMER0bit);
+ local_irq_restore(flags);
+}
+
+static void bfin_t350mcqb_stop_timers(void)
+{
+ disable_gptimers(TIMER0bit | TIMER1bit);
+
+ set_gptimer_status(0, TIMER_STATUS_TRUN0 | TIMER_STATUS_TRUN1 |
+ TIMER_STATUS_TIMIL0 | TIMER_STATUS_TIMIL1 |
+ TIMER_STATUS_TOVF0 | TIMER_STATUS_TOVF1);
+
+}
+
+static void bfin_t350mcqb_init_timers(void)
+{
+
+ bfin_t350mcqb_stop_timers();
+
+ set_gptimer_period(TIMER0_id, H_PERIOD);
+ set_gptimer_pwidth(TIMER0_id, H_PULSE);
+ set_gptimer_config(TIMER0_id, TIMER_MODE_PWM | TIMER_PERIOD_CNT |
+ TIMER_TIN_SEL | TIMER_CLK_SEL|
+ TIMER_EMU_RUN);
+
+ set_gptimer_period(TIMER1_id, V_PERIOD);
+ set_gptimer_pwidth(TIMER1_id, V_PULSE);
+ set_gptimer_config(TIMER1_id, TIMER_MODE_PWM | TIMER_PERIOD_CNT |
+ TIMER_TIN_SEL | TIMER_CLK_SEL |
+ TIMER_EMU_RUN);
+
+}
+
+static void bfin_t350mcqb_config_dma(struct bfin_t350mcqbfb_info *fbi)
+{
+
+ set_dma_config(CH_PPI,
+ set_bfin_dma_config(DIR_READ, DMA_FLOW_AUTO,
+ INTR_DISABLE, DIMENSION_2D,
+ DATA_SIZE_16,
+ DMA_NOSYNC_KEEP_DMA_BUF));
+ set_dma_x_count(CH_PPI, (LCD_X_RES * LCD_BPP) / DMA_BUS_SIZE);
+ set_dma_x_modify(CH_PPI, DMA_BUS_SIZE / 8);
+ set_dma_y_count(CH_PPI, V_LINES);
+
+ set_dma_y_modify(CH_PPI, DMA_BUS_SIZE / 8);
+ set_dma_start_addr(CH_PPI, (unsigned long)fbi->fb_buffer);
+
+}
+
+static u16 ppi0_req_8[] = {P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2,
+ P_PPI0_D0, P_PPI0_D1, P_PPI0_D2,
+ P_PPI0_D3, P_PPI0_D4, P_PPI0_D5,
+ P_PPI0_D6, P_PPI0_D7, 0};
+
+static int bfin_t350mcqb_request_ports(int action)
+{
+ if (action) {
+ if (peripheral_request_list(ppi0_req_8, DRIVER_NAME)) {
+ printk(KERN_ERR "Requesting Peripherals faild\n");
+ return -EFAULT;
+ }
+ } else
+ peripheral_free_list(ppi0_req_8);
+
+ return 0;
+}
+
+static int bfin_t350mcqb_fb_open(struct fb_info *info, int user)
+{
+ struct bfin_t350mcqbfb_info *fbi = info->par;
+
+ spin_lock(&fbi->lock);
+ fbi->lq043_open_cnt++;
+
+ if (fbi->lq043_open_cnt <= 1) {
+
+ bfin_t350mcqb_disable_ppi();
+ SSYNC();
+
+ bfin_t350mcqb_config_dma(fbi);
+ bfin_t350mcqb_config_ppi(fbi);
+ bfin_t350mcqb_init_timers();
+
+ /* start dma */
+ enable_dma(CH_PPI);
+ bfin_t350mcqb_enable_ppi();
+ bfin_t350mcqb_start_timers();
+ }
+
+ spin_unlock(&fbi->lock);
+
+ return 0;
+}
+
+static int bfin_t350mcqb_fb_release(struct fb_info *info, int user)
+{
+ struct bfin_t350mcqbfb_info *fbi = info->par;
+
+ spin_lock(&fbi->lock);
+
+ fbi->lq043_open_cnt--;
+ fbi->lq043_mmap = 0;
+
+ if (fbi->lq043_open_cnt <= 0) {
+ bfin_t350mcqb_disable_ppi();
+ SSYNC();
+ disable_dma(CH_PPI);
+ bfin_t350mcqb_stop_timers();
+ memset(fbi->fb_buffer, 0, info->fix.smem_len);
+ }
+
+ spin_unlock(&fbi->lock);
+
+ return 0;
+}
+
+static int bfin_t350mcqb_fb_check_var(struct fb_var_screeninfo *var,
+ struct fb_info *info)
+{
+
+ if (var->bits_per_pixel != LCD_BPP) {
+ pr_debug("%s: depth not supported: %u BPP\n", __FUNCTION__,
+ var->bits_per_pixel);
+ return -EINVAL;
+ }
+
+ if (info->var.xres != var->xres || info->var.yres != var->yres ||
+ info->var.xres_virtual != var->xres_virtual ||
+ info->var.yres_virtual != var->yres_virtual) {
+ pr_debug("%s: Resolution not supported: X%u x Y%u \n",
+ __FUNCTION__, var->xres, var->yres);
+ return -EINVAL;
+ }
+
+ /*
+ * Memory limit
+ */
+
+ if ((info->fix.line_length * var->yres_virtual) > info->fix.smem_len) {
+ pr_debug("%s: Memory Limit requested yres_virtual = %u\n",
+ __FUNCTION__, var->yres_virtual);
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+static int bfin_t350mcqb_fb_mmap(struct fb_info *info, struct vm_area_struct *vma)
+{
+ struct bfin_t350mcqbfb_info *fbi = info->par;
+
+ if (fbi->lq043_mmap)
+ return -1;
+
+ spin_lock(&fbi->lock);
+ fbi->lq043_mmap = 1;
+ spin_unlock(&fbi->lock);
+
+ vma->vm_start = (unsigned long)(fbi->fb_buffer + ACTIVE_VIDEO_MEM_OFFSET);
+
+ vma->vm_end = vma->vm_start + info->fix.smem_len;
+ /* For those who don't understand how mmap works, go read
+ * Documentation/nommu-mmap.txt.
+ * For those that do, you will know that the VM_MAYSHARE flag
+ * must be set in the vma->vm_flags structure on noMMU
+ * Other flags can be set, and are documented in
+ * include/linux/mm.h
+ */
+ vma->vm_flags |= VM_MAYSHARE | VM_SHARED;
+
+ return 0;
+}
+
+int bfin_t350mcqb_fb_cursor(struct fb_info *info, struct fb_cursor *cursor)
+{
+ if (nocursor)
+ return 0;
+ else
+ return -EINVAL; /* just to force soft_cursor() call */
+}
+
+static int bfin_t350mcqb_fb_setcolreg(u_int regno, u_int red, u_int green,
+ u_int blue, u_int transp,
+ struct fb_info *info)
+{
+ if (regno >= BFIN_LCD_NBR_PALETTE_ENTRIES)
+ return -EINVAL;
+
+ if (info->var.grayscale) {
+ /* grayscale = 0.30*R + 0.59*G + 0.11*B */
+ red = green = blue = (red * 77 + green * 151 + blue * 28) >> 8;
+ }
+
+ if (info->fix.visual == FB_VISUAL_TRUECOLOR) {
+
+ u32 value;
+ /* Place color in the pseudopalette */
+ if (regno > 16)
+ return -EINVAL;
+
+ red >>= (16 - info->var.red.length);
+ green >>= (16 - info->var.green.length);
+ blue >>= (16 - info->var.blue.length);
+
+ value = (red << info->var.red.offset) |
+ (green << info->var.green.offset) |
+ (blue << info->var.blue.offset);
+ value &= 0xFFFFFF;
+
+ ((u32 *) (info->pseudo_palette))[regno] = value;
+
+ }
+
+ return 0;
+}
+
+static struct fb_ops bfin_t350mcqb_fb_ops = {
+ .owner = THIS_MODULE,
+ .fb_open = bfin_t350mcqb_fb_open,
+ .fb_release = bfin_t350mcqb_fb_release,
+ .fb_check_var = bfin_t350mcqb_fb_check_var,
+ .fb_fillrect = cfb_fillrect,
+ .fb_copyarea = cfb_copyarea,
+ .fb_imageblit = cfb_imageblit,
+ .fb_mmap = bfin_t350mcqb_fb_mmap,
+ .fb_cursor = bfin_t350mcqb_fb_cursor,
+ .fb_setcolreg = bfin_t350mcqb_fb_setcolreg,
+};
+
+#ifndef NO_BL_SUPPORT
+static int bl_get_brightness(struct backlight_device *bd)
+{
+ return 0;
+}
+
+static struct backlight_ops bfin_lq043fb_bl_ops = {
+ .get_brightness = bl_get_brightness,
+};
+
+static struct backlight_device *bl_dev;
+
+static int bfin_lcd_get_power(struct lcd_device *dev)
+{
+ return 0;
+}
+
+static int bfin_lcd_set_power(struct lcd_device *dev, int power)
+{
+ return 0;
+}
+
+static int bfin_lcd_get_contrast(struct lcd_device *dev)
+{
+ return 0;
+}
+
+static int bfin_lcd_set_contrast(struct lcd_device *dev, int contrast)
+{
+
+ return 0;
+}
+
+static int bfin_lcd_check_fb(struct fb_info *fi)
+{
+ if (!fi || (fi == &bfin_t350mcqb_fb))
+ return 1;
+ return 0;
+}
+
+static struct lcd_ops bfin_lcd_ops = {
+ .get_power = bfin_lcd_get_power,
+ .set_power = bfin_lcd_set_power,
+ .get_contrast = bfin_lcd_get_contrast,
+ .set_contrast = bfin_lcd_set_contrast,
+ .check_fb = bfin_lcd_check_fb,
+};
+
+static struct lcd_device *lcd_dev;
+#endif
+
+static irqreturn_t bfin_t350mcqb_irq_error(int irq, void *dev_id)
+{
+ /*struct bfin_t350mcqbfb_info *info = (struct bfin_t350mcqbfb_info *)dev_id;*/
+
+ u16 status = bfin_read_PPI_STATUS();
+ bfin_write_PPI_STATUS(0xFFFF);
+
+ if (status) {
+ bfin_t350mcqb_disable_ppi();
+ disable_dma(CH_PPI);
+
+ /* start dma */
+ enable_dma(CH_PPI);
+ bfin_t350mcqb_enable_ppi();
+ bfin_write_PPI_STATUS(0xFFFF);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int __init bfin_t350mcqb_probe(struct platform_device *pdev)
+{
+ struct bfin_t350mcqbfb_info *info;
+ struct fb_info *fbinfo;
+ int ret;
+
+ printk(KERN_INFO DRIVER_NAME ": %dx%d %d-bit RGB FrameBuffer initializing...\n",
+ LCD_X_RES, LCD_Y_RES, LCD_BPP);
+
+ if (request_dma(CH_PPI, "CH_PPI") < 0) {
+ printk(KERN_ERR DRIVER_NAME
+ ": couldn't request CH_PPI DMA\n");
+ ret = -EFAULT;
+ goto out1;
+ }
+
+ fbinfo =
+ framebuffer_alloc(sizeof(struct bfin_t350mcqbfb_info), &pdev->dev);
+ if (!fbinfo) {
+ ret = -ENOMEM;
+ goto out2;
+ }
+
+ info = fbinfo->par;
+ info->fb = fbinfo;
+ info->dev = &pdev->dev;
+
+ platform_set_drvdata(pdev, fbinfo);
+
+ strcpy(fbinfo->fix.id, driver_name);
+
+ fbinfo->fix.type = FB_TYPE_PACKED_PIXELS;
+ fbinfo->fix.type_aux = 0;
+ fbinfo->fix.xpanstep = 0;
+ fbinfo->fix.ypanstep = 0;
+ fbinfo->fix.ywrapstep = 0;
+ fbinfo->fix.accel = FB_ACCEL_NONE;
+ fbinfo->fix.visual = FB_VISUAL_TRUECOLOR;
+
+ fbinfo->var.nonstd = 0;
+ fbinfo->var.activate = FB_ACTIVATE_NOW;
+ fbinfo->var.height = -1;
+ fbinfo->var.width = -1;
+ fbinfo->var.accel_flags = 0;
+ fbinfo->var.vmode = FB_VMODE_NONINTERLACED;
+
+ fbinfo->var.xres = LCD_X_RES;
+ fbinfo->var.xres_virtual = LCD_X_RES;
+ fbinfo->var.yres = LCD_Y_RES;
+ fbinfo->var.yres_virtual = LCD_Y_RES;
+ fbinfo->var.bits_per_pixel = LCD_BPP;
+
+ fbinfo->var.red.offset = 0;
+ fbinfo->var.green.offset = 8;
+ fbinfo->var.blue.offset = 16;
+ fbinfo->var.transp.offset = 0;
+ fbinfo->var.red.length = 8;
+ fbinfo->var.green.length = 8;
+ fbinfo->var.blue.length = 8;
+ fbinfo->var.transp.length = 0;
+ fbinfo->fix.smem_len = LCD_X_RES * LCD_Y_RES * LCD_BPP / 8;
+
+ fbinfo->fix.line_length = fbinfo->var.xres_virtual *
+ fbinfo->var.bits_per_pixel / 8;
+
+
+ fbinfo->fbops = &bfin_t350mcqb_fb_ops;
+ fbinfo->flags = FBINFO_FLAG_DEFAULT;
+
+ info->fb_buffer =
+ dma_alloc_coherent(NULL, fbinfo->fix.smem_len, &info->dma_handle,
+ GFP_KERNEL);
+
+ if (NULL == info->fb_buffer) {
+ printk(KERN_ERR DRIVER_NAME
+ ": couldn't allocate dma buffer.\n");
+ ret = -ENOMEM;
+ goto out3;
+ }
+
+ memset(info->fb_buffer, 0, fbinfo->fix.smem_len);
+
+ fbinfo->screen_base = (void *)info->fb_buffer + ACTIVE_VIDEO_MEM_OFFSET;
+ fbinfo->fix.smem_start = (int)info->fb_buffer + ACTIVE_VIDEO_MEM_OFFSET;
+
+ fbinfo->fbops = &bfin_t350mcqb_fb_ops;
+
+ fbinfo->pseudo_palette = &info->pseudo_pal;
+
+ if (fb_alloc_cmap(&fbinfo->cmap, BFIN_LCD_NBR_PALETTE_ENTRIES, 0)
+ < 0) {
+ printk(KERN_ERR DRIVER_NAME
+ "Fail to allocate colormap (%d entries)\n",
+ BFIN_LCD_NBR_PALETTE_ENTRIES);
+ ret = -EFAULT;
+ goto out4;
+ }
+
+ if (bfin_t350mcqb_request_ports(1)) {
+ printk(KERN_ERR DRIVER_NAME ": couldn't request gpio port.\n");
+ ret = -EFAULT;
+ goto out6;
+ }
+
+ info->irq = platform_get_irq(pdev, 0);
+ if (info->irq < 0) {
+ ret = -EINVAL;
+ goto out7;
+ }
+
+ ret = request_irq(info->irq, bfin_t350mcqb_irq_error, IRQF_DISABLED,
+ "PPI ERROR", info);
+ if (ret < 0) {
+ printk(KERN_ERR DRIVER_NAME
+ ": unable to request PPI ERROR IRQ\n");
+ goto out7;
+ }
+
+ if (register_framebuffer(fbinfo) < 0) {
+ printk(KERN_ERR DRIVER_NAME
+ ": unable to register framebuffer.\n");
+ ret = -EINVAL;
+ goto out8;
+ }
+#ifndef NO_BL_SUPPORT
+ bl_dev =
+ backlight_device_register("bf52x-bl", NULL, NULL,
+ &bfin_lq043fb_bl_ops);
+ bl_dev->props.max_brightness = 255;
+
+ lcd_dev = lcd_device_register(DRIVER_NAME, NULL, &bfin_lcd_ops);
+ lcd_dev->props.max_contrast = 255, printk(KERN_INFO "Done.\n");
+#endif
+
+ return 0;
+
+out8:
+ free_irq(info->irq, info);
+out7:
+ bfin_t350mcqb_request_ports(0);
+out6:
+ fb_dealloc_cmap(&fbinfo->cmap);
+out4:
+ dma_free_coherent(NULL, fbinfo->fix.smem_len, info->fb_buffer,
+ info->dma_handle);
+out3:
+ framebuffer_release(fbinfo);
+out2:
+ free_dma(CH_PPI);
+out1:
+ platform_set_drvdata(pdev, NULL);
+
+ return ret;
+}
+
+static int bfin_t350mcqb_remove(struct platform_device *pdev)
+{
+
+ struct fb_info *fbinfo = platform_get_drvdata(pdev);
+ struct bfin_t350mcqbfb_info *info = fbinfo->par;
+
+ unregister_framebuffer(fbinfo);
+
+ free_dma(CH_PPI);
+ free_irq(info->irq, info);
+
+ if (info->fb_buffer != NULL)
+ dma_free_coherent(NULL, fbinfo->fix.smem_len, info->fb_buffer,
+ info->dma_handle);
+
+ fb_dealloc_cmap(&fbinfo->cmap);
+
+#ifndef NO_BL_SUPPORT
+ lcd_device_unregister(lcd_dev);
+ backlight_device_unregister(bl_dev);
+#endif
+
+ bfin_t350mcqb_request_ports(0);
+
+ platform_set_drvdata(pdev, NULL);
+ framebuffer_release(fbinfo);
+
+ printk(KERN_INFO DRIVER_NAME ": Unregister LCD driver.\n");
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int bfin_t350mcqb_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ struct fb_info *fbinfo = platform_get_drvdata(pdev);
+ struct bfin_t350mcqbfb_info *info = fbinfo->par;
+
+ bfin_t350mcqb_disable_ppi();
+ disable_dma(CH_PPI);
+ bfin_write_PPI_STATUS(0xFFFF);
+
+ return 0;
+}
+
+static int bfin_t350mcqb_resume(struct platform_device *pdev)
+{
+ struct fb_info *fbinfo = platform_get_drvdata(pdev);
+ struct bfin_t350mcqbfb_info *info = fbinfo->par;
+
+ enable_dma(CH_PPI);
+ bfin_t350mcqb_enable_ppi();
+
+ return 0;
+}
+#else
+#define bfin_t350mcqb_suspend NULL
+#define bfin_t350mcqb_resume NULL
+#endif
+
+static struct platform_driver bfin_t350mcqb_driver = {
+ .probe = bfin_t350mcqb_probe,
+ .remove = bfin_t350mcqb_remove,
+ .suspend = bfin_t350mcqb_suspend,
+ .resume = bfin_t350mcqb_resume,
+ .driver = {
+ .name = DRIVER_NAME,
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __devinit bfin_t350mcqb_driver_init(void)
+{
+ return platform_driver_register(&bfin_t350mcqb_driver);
+}
+
+static void __exit bfin_t350mcqb_driver_cleanup(void)
+{
+ platform_driver_unregister(&bfin_t350mcqb_driver);
+}
+
+MODULE_DESCRIPTION("Blackfin TFT LCD Driver");
+MODULE_LICENSE("GPL");
+
+module_init(bfin_t350mcqb_driver_init);
+module_exit(bfin_t350mcqb_driver_cleanup);
diff --git a/drivers/video/cg14.c b/drivers/video/cg14.c
index 41f6dbf61be..fdc9f43ec30 100644
--- a/drivers/video/cg14.c
+++ b/drivers/video/cg14.c
@@ -16,6 +16,7 @@
#include <linux/init.h>
#include <linux/fb.h>
#include <linux/mm.h>
+#include <linux/uaccess.h>
#include <asm/io.h>
#include <asm/prom.h>
diff --git a/drivers/video/chipsfb.c b/drivers/video/chipsfb.c
index 6796ba62c3c..777389c4098 100644
--- a/drivers/video/chipsfb.c
+++ b/drivers/video/chipsfb.c
@@ -459,7 +459,7 @@ static int chipsfb_pci_suspend(struct pci_dev *pdev, pm_message_t state)
if (state.event == pdev->dev.power.power_state.event)
return 0;
- if (state.event != PM_EVENT_SUSPEND)
+ if (!(state.event & PM_EVENT_SLEEP))
goto done;
acquire_console_sem();
diff --git a/drivers/video/fb_defio.c b/drivers/video/fb_defio.c
index 0f8cfb988c9..24843fdd539 100644
--- a/drivers/video/fb_defio.c
+++ b/drivers/video/fb_defio.c
@@ -4,7 +4,7 @@
* Copyright (C) 2006 Jaya Kumar
*
* This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive
+ * License. See the file COPYING in the main directory of this archive
* for more details.
*/
@@ -31,7 +31,7 @@ static int fb_deferred_io_fault(struct vm_area_struct *vma,
unsigned long offset;
struct page *page;
struct fb_info *info = vma->vm_private_data;
- /* info->screen_base is in System RAM */
+ /* info->screen_base is virtual memory */
void *screen_base = (void __force *) info->screen_base;
offset = vmf->pgoff << PAGE_SHIFT;
@@ -43,6 +43,15 @@ static int fb_deferred_io_fault(struct vm_area_struct *vma,
return VM_FAULT_SIGBUS;
get_page(page);
+
+ if (vma->vm_file)
+ page->mapping = vma->vm_file->f_mapping;
+ else
+ printk(KERN_ERR "no mapping available\n");
+
+ BUG_ON(!page->mapping);
+ page->index = vmf->pgoff;
+
vmf->page = page;
return 0;
}
@@ -138,11 +147,20 @@ EXPORT_SYMBOL_GPL(fb_deferred_io_init);
void fb_deferred_io_cleanup(struct fb_info *info)
{
+ void *screen_base = (void __force *) info->screen_base;
struct fb_deferred_io *fbdefio = info->fbdefio;
+ struct page *page;
+ int i;
BUG_ON(!fbdefio);
cancel_delayed_work(&info->deferred_work);
flush_scheduled_work();
+
+ /* clear out the mapping that we setup */
+ for (i = 0 ; i < info->fix.smem_len; i += PAGE_SIZE) {
+ page = vmalloc_to_page(screen_base + i);
+ page->mapping = NULL;
+ }
}
EXPORT_SYMBOL_GPL(fb_deferred_io_cleanup);
diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c
index 1194f5e060e..01072f4b3e8 100644
--- a/drivers/video/fbmem.c
+++ b/drivers/video/fbmem.c
@@ -1521,6 +1521,7 @@ module_init(fbmem_init);
static void __exit
fbmem_exit(void)
{
+ remove_proc_entry("fb", NULL);
class_destroy(fb_class);
unregister_chrdev(FB_MAJOR, "fb");
}
diff --git a/drivers/video/hitfb.c b/drivers/video/hitfb.c
index 756c0ce8591..392a8be6aa7 100644
--- a/drivers/video/hitfb.c
+++ b/drivers/video/hitfb.c
@@ -403,7 +403,7 @@ static int __init hitfb_probe(struct platform_device *dev)
return 0;
}
-static int __devexit hitfb_remove(struct platform_device *dev)
+static int __exit hitfb_remove(struct platform_device *dev)
{
return unregister_framebuffer(&fb_info);
}
@@ -439,7 +439,7 @@ static int hitfb_resume(struct platform_device *dev)
static struct platform_driver hitfb_driver = {
.probe = hitfb_probe,
- .remove = __devexit_p(hitfb_remove),
+ .remove = __exit_p(hitfb_remove),
#ifdef CONFIG_PM
.suspend = hitfb_suspend,
.resume = hitfb_resume,
diff --git a/drivers/video/i810/i810_main.c b/drivers/video/i810/i810_main.c
index 1d13dd099af..a24e680d2b9 100644
--- a/drivers/video/i810/i810_main.c
+++ b/drivers/video/i810/i810_main.c
@@ -1476,7 +1476,7 @@ static int i810fb_cursor(struct fb_info *info, struct fb_cursor *cursor)
struct i810fb_par *par = info->par;
u8 __iomem *mmio = par->mmio_start_virtual;
- if (!(par->dev_flags & LOCKUP))
+ if (par->dev_flags & LOCKUP)
return -ENXIO;
if (cursor->image.width > 64 || cursor->image.height > 64)
diff --git a/drivers/video/mbx/mbxfb.c b/drivers/video/mbx/mbxfb.c
index 80cd117ca65..01f77bcc68f 100644
--- a/drivers/video/mbx/mbxfb.c
+++ b/drivers/video/mbx/mbxfb.c
@@ -889,7 +889,7 @@ static int __devinit mbxfb_probe(struct platform_device *dev)
struct mbxfb_info *mfbi;
struct mbxfb_platform_data *pdata;
- dev_dbg(dev, "mbxfb_probe\n");
+ dev_dbg(&dev->dev, "mbxfb_probe\n");
pdata = dev->dev.platform_data;
if (!pdata) {
diff --git a/drivers/video/metronomefb.c b/drivers/video/metronomefb.c
new file mode 100644
index 00000000000..e9a89fd8275
--- /dev/null
+++ b/drivers/video/metronomefb.c
@@ -0,0 +1,999 @@
+/*
+ * linux/drivers/video/metronomefb.c -- FB driver for Metronome controller
+ *
+ * Copyright (C) 2008, Jaya Kumar
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ *
+ * Layout is based on skeletonfb.c by James Simmons and Geert Uytterhoeven.
+ *
+ * This work was made possible by help and equipment support from E-Ink
+ * Corporation. http://support.eink.com/community
+ *
+ * This driver is written to be used with the Metronome display controller.
+ * It was tested with an E-Ink 800x600 Vizplex EPD on a Gumstix Connex board
+ * using the Lyre interface board.
+ *
+ * General notes:
+ * - User must set metronomefb_enable=1 to enable it.
+ * - See Documentation/fb/metronomefb.txt for how metronome works.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/list.h>
+#include <linux/firmware.h>
+#include <linux/dma-mapping.h>
+#include <linux/uaccess.h>
+#include <linux/irq.h>
+
+#include <asm/arch/pxa-regs.h>
+#include <asm/unaligned.h>
+
+#define DEBUG 1
+#ifdef DEBUG
+#define DPRINTK(f, a...) printk(KERN_DEBUG "%s: " f, __func__ , ## a)
+#else
+#define DPRINTK(f, a...)
+#endif
+
+
+/* Display specific information */
+#define DPY_W 832
+#define DPY_H 622
+
+struct metromem_desc {
+ u32 mFDADR0;
+ u32 mFSADR0;
+ u32 mFIDR0;
+ u32 mLDCMD0;
+};
+
+struct metromem_cmd {
+ u16 opcode;
+ u16 args[((64-2)/2)];
+ u16 csum;
+};
+
+struct metronomefb_par {
+ unsigned char *metromem;
+ struct metromem_desc *metromem_desc;
+ struct metromem_cmd *metromem_cmd;
+ unsigned char *metromem_wfm;
+ unsigned char *metromem_img;
+ u16 *metromem_img_csum;
+ u16 *csum_table;
+ int metromemsize;
+ dma_addr_t metromem_dma;
+ dma_addr_t metromem_desc_dma;
+ struct fb_info *info;
+ wait_queue_head_t waitq;
+ u8 frame_count;
+};
+
+/* frame differs from image. frame includes non-visible pixels */
+struct epd_frame {
+ int fw; /* frame width */
+ int fh; /* frame height */
+};
+
+static struct epd_frame epd_frame_table[] = {
+ {
+ .fw = 832,
+ .fh = 622
+ },
+};
+
+static struct fb_fix_screeninfo metronomefb_fix __devinitdata = {
+ .id = "metronomefb",
+ .type = FB_TYPE_PACKED_PIXELS,
+ .visual = FB_VISUAL_STATIC_PSEUDOCOLOR,
+ .xpanstep = 0,
+ .ypanstep = 0,
+ .ywrapstep = 0,
+ .line_length = DPY_W,
+ .accel = FB_ACCEL_NONE,
+};
+
+static struct fb_var_screeninfo metronomefb_var __devinitdata = {
+ .xres = DPY_W,
+ .yres = DPY_H,
+ .xres_virtual = DPY_W,
+ .yres_virtual = DPY_H,
+ .bits_per_pixel = 8,
+ .grayscale = 1,
+ .nonstd = 1,
+ .red = { 4, 3, 0 },
+ .green = { 0, 0, 0 },
+ .blue = { 0, 0, 0 },
+ .transp = { 0, 0, 0 },
+};
+
+static unsigned int metronomefb_enable;
+
+struct waveform_hdr {
+ u8 stuff[32];
+
+ u8 wmta[3];
+ u8 fvsn;
+
+ u8 luts;
+ u8 mc;
+ u8 trc;
+ u8 stuff3;
+
+ u8 endb;
+ u8 swtb;
+ u8 stuff2a[2];
+
+ u8 stuff2b[3];
+ u8 wfm_cs;
+} __attribute__ ((packed));
+
+/* main metronomefb functions */
+static u8 calc_cksum(int start, int end, u8 *mem)
+{
+ u8 tmp = 0;
+ int i;
+
+ for (i = start; i < end; i++)
+ tmp += mem[i];
+
+ return tmp;
+}
+
+static u16 calc_img_cksum(u16 *start, int length)
+{
+ u16 tmp = 0;
+
+ while (length--)
+ tmp += *start++;
+
+ return tmp;
+}
+
+/* here we decode the incoming waveform file and populate metromem */
+#define EXP_WFORM_SIZE 47001
+static int load_waveform(u8 *mem, size_t size, u8 *metromem, int m, int t,
+ u8 *frame_count)
+{
+ int tta;
+ int wmta;
+ int trn = 0;
+ int i;
+ unsigned char v;
+ u8 cksum;
+ int cksum_idx;
+ int wfm_idx, owfm_idx;
+ int mem_idx = 0;
+ struct waveform_hdr *wfm_hdr;
+
+ if (size != EXP_WFORM_SIZE) {
+ printk(KERN_ERR "Error: unexpected size %d != %d\n", size,
+ EXP_WFORM_SIZE);
+ return -EINVAL;
+ }
+
+ wfm_hdr = (struct waveform_hdr *) mem;
+
+ if (wfm_hdr->fvsn != 1) {
+ printk(KERN_ERR "Error: bad fvsn %x\n", wfm_hdr->fvsn);
+ return -EINVAL;
+ }
+ if (wfm_hdr->luts != 0) {
+ printk(KERN_ERR "Error: bad luts %x\n", wfm_hdr->luts);
+ return -EINVAL;
+ }
+ cksum = calc_cksum(32, 47, mem);
+ if (cksum != wfm_hdr->wfm_cs) {
+ printk(KERN_ERR "Error: bad cksum %x != %x\n", cksum,
+ wfm_hdr->wfm_cs);
+ return -EINVAL;
+ }
+ wfm_hdr->mc += 1;
+ wfm_hdr->trc += 1;
+ for (i = 0; i < 5; i++) {
+ if (*(wfm_hdr->stuff2a + i) != 0) {
+ printk(KERN_ERR "Error: unexpected value in padding\n");
+ return -EINVAL;
+ }
+ }
+
+ /* calculating trn. trn is something used to index into
+ the waveform. presumably selecting the right one for the
+ desired temperature. it works out the offset of the first
+ v that exceeds the specified temperature */
+ if ((sizeof(*wfm_hdr) + wfm_hdr->trc) > size)
+ return -EINVAL;
+
+ for (i = sizeof(*wfm_hdr); i <= sizeof(*wfm_hdr) + wfm_hdr->trc; i++) {
+ if (mem[i] > t) {
+ trn = i - sizeof(*wfm_hdr) - 1;
+ break;
+ }
+ }
+
+ /* check temperature range table checksum */
+ cksum_idx = sizeof(*wfm_hdr) + wfm_hdr->trc + 1;
+ if (cksum_idx > size)
+ return -EINVAL;
+ cksum = calc_cksum(sizeof(*wfm_hdr), cksum_idx, mem);
+ if (cksum != mem[cksum_idx]) {
+ printk(KERN_ERR "Error: bad temperature range table cksum"
+ " %x != %x\n", cksum, mem[cksum_idx]);
+ return -EINVAL;
+ }
+
+ /* check waveform mode table address checksum */
+ wmta = le32_to_cpu(get_unaligned((__le32 *) wfm_hdr->wmta));
+ wmta &= 0x00FFFFFF;
+ cksum_idx = wmta + m*4 + 3;
+ if (cksum_idx > size)
+ return -EINVAL;
+ cksum = calc_cksum(cksum_idx - 3, cksum_idx, mem);
+ if (cksum != mem[cksum_idx]) {
+ printk(KERN_ERR "Error: bad mode table address cksum"
+ " %x != %x\n", cksum, mem[cksum_idx]);
+ return -EINVAL;
+ }
+
+ /* check waveform temperature table address checksum */
+ tta = le32_to_cpu(get_unaligned((int *) (mem + wmta + m*4)));
+ tta &= 0x00FFFFFF;
+ cksum_idx = tta + trn*4 + 3;
+ if (cksum_idx > size)
+ return -EINVAL;
+ cksum = calc_cksum(cksum_idx - 3, cksum_idx, mem);
+ if (cksum != mem[cksum_idx]) {
+ printk(KERN_ERR "Error: bad temperature table address cksum"
+ " %x != %x\n", cksum, mem[cksum_idx]);
+ return -EINVAL;
+ }
+
+ /* here we do the real work of putting the waveform into the
+ metromem buffer. this does runlength decoding of the waveform */
+ wfm_idx = le32_to_cpu(get_unaligned((__le32 *) (mem + tta + trn*4)));
+ wfm_idx &= 0x00FFFFFF;
+ owfm_idx = wfm_idx;
+ if (wfm_idx > size)
+ return -EINVAL;
+ while (wfm_idx < size) {
+ unsigned char rl;
+ v = mem[wfm_idx++];
+ if (v == wfm_hdr->swtb) {
+ while (((v = mem[wfm_idx++]) != wfm_hdr->swtb) &&
+ wfm_idx < size)
+ metromem[mem_idx++] = v;
+
+ continue;
+ }
+
+ if (v == wfm_hdr->endb)
+ break;
+
+ rl = mem[wfm_idx++];
+ for (i = 0; i <= rl; i++)
+ metromem[mem_idx++] = v;
+ }
+
+ cksum_idx = wfm_idx;
+ if (cksum_idx > size)
+ return -EINVAL;
+ cksum = calc_cksum(owfm_idx, cksum_idx, mem);
+ if (cksum != mem[cksum_idx]) {
+ printk(KERN_ERR "Error: bad waveform data cksum"
+ " %x != %x\n", cksum, mem[cksum_idx]);
+ return -EINVAL;
+ }
+ *frame_count = (mem_idx/64);
+
+ return 0;
+}
+
+/* register offsets for gpio control */
+#define LED_GPIO_PIN 51
+#define STDBY_GPIO_PIN 48
+#define RST_GPIO_PIN 49
+#define RDY_GPIO_PIN 32
+#define ERR_GPIO_PIN 17
+#define PCBPWR_GPIO_PIN 16
+
+#define AF_SEL_GPIO_N 0x3
+#define GAFR0_U_OFFSET(pin) ((pin - 16) * 2)
+#define GAFR1_L_OFFSET(pin) ((pin - 32) * 2)
+#define GAFR1_U_OFFSET(pin) ((pin - 48) * 2)
+#define GPDR1_OFFSET(pin) (pin - 32)
+#define GPCR1_OFFSET(pin) (pin - 32)
+#define GPSR1_OFFSET(pin) (pin - 32)
+#define GPCR0_OFFSET(pin) (pin)
+#define GPSR0_OFFSET(pin) (pin)
+
+static void metronome_set_gpio_output(int pin, int val)
+{
+ u8 index;
+
+ index = pin >> 4;
+
+ switch (index) {
+ case 1:
+ if (val)
+ GPSR0 |= (1 << GPSR0_OFFSET(pin));
+ else
+ GPCR0 |= (1 << GPCR0_OFFSET(pin));
+ break;
+ case 2:
+ break;
+ case 3:
+ if (val)
+ GPSR1 |= (1 << GPSR1_OFFSET(pin));
+ else
+ GPCR1 |= (1 << GPCR1_OFFSET(pin));
+ break;
+ default:
+ printk(KERN_ERR "unimplemented\n");
+ }
+}
+
+static void __devinit metronome_init_gpio_pin(int pin, int dir)
+{
+ u8 index;
+ /* dir 0 is output, 1 is input
+ - do 2 things here:
+ - set gpio alternate function to standard gpio
+ - set gpio direction to input or output */
+
+ index = pin >> 4;
+ switch (index) {
+ case 1:
+ GAFR0_U &= ~(AF_SEL_GPIO_N << GAFR0_U_OFFSET(pin));
+
+ if (dir)
+ GPDR0 &= ~(1 << pin);
+ else
+ GPDR0 |= (1 << pin);
+ break;
+ case 2:
+ GAFR1_L &= ~(AF_SEL_GPIO_N << GAFR1_L_OFFSET(pin));
+
+ if (dir)
+ GPDR1 &= ~(1 << GPDR1_OFFSET(pin));
+ else
+ GPDR1 |= (1 << GPDR1_OFFSET(pin));
+ break;
+ case 3:
+ GAFR1_U &= ~(AF_SEL_GPIO_N << GAFR1_U_OFFSET(pin));
+
+ if (dir)
+ GPDR1 &= ~(1 << GPDR1_OFFSET(pin));
+ else
+ GPDR1 |= (1 << GPDR1_OFFSET(pin));
+ break;
+ default:
+ printk(KERN_ERR "unimplemented\n");
+ }
+}
+
+static void __devinit metronome_init_gpio_regs(void)
+{
+ metronome_init_gpio_pin(LED_GPIO_PIN, 0);
+ metronome_set_gpio_output(LED_GPIO_PIN, 0);
+
+ metronome_init_gpio_pin(STDBY_GPIO_PIN, 0);
+ metronome_set_gpio_output(STDBY_GPIO_PIN, 0);
+
+ metronome_init_gpio_pin(RST_GPIO_PIN, 0);
+ metronome_set_gpio_output(RST_GPIO_PIN, 0);
+
+ metronome_init_gpio_pin(RDY_GPIO_PIN, 1);
+
+ metronome_init_gpio_pin(ERR_GPIO_PIN, 1);
+
+ metronome_init_gpio_pin(PCBPWR_GPIO_PIN, 0);
+ metronome_set_gpio_output(PCBPWR_GPIO_PIN, 0);
+}
+
+static void metronome_disable_lcd_controller(struct metronomefb_par *par)
+{
+ LCSR = 0xffffffff; /* Clear LCD Status Register */
+ LCCR0 |= LCCR0_DIS; /* Disable LCD Controller */
+
+ /* we reset and just wait for things to settle */
+ msleep(200);
+}
+
+static void metronome_enable_lcd_controller(struct metronomefb_par *par)
+{
+ LCSR = 0xffffffff;
+ FDADR0 = par->metromem_desc_dma;
+ LCCR0 |= LCCR0_ENB;
+}
+
+static void __devinit metronome_init_lcdc_regs(struct metronomefb_par *par)
+{
+ /* here we do:
+ - disable the lcd controller
+ - setup lcd control registers
+ - setup dma descriptor
+ - reenable lcd controller
+ */
+
+ /* disable the lcd controller */
+ metronome_disable_lcd_controller(par);
+
+ /* setup lcd control registers */
+ LCCR0 = LCCR0_LDM | LCCR0_SFM | LCCR0_IUM | LCCR0_EFM | LCCR0_PAS
+ | LCCR0_QDM | LCCR0_BM | LCCR0_OUM;
+
+ LCCR1 = (epd_frame_table[0].fw/2 - 1) /* pixels per line */
+ | (27 << 10) /* hsync pulse width - 1 */
+ | (33 << 16) /* eol pixel count */
+ | (33 << 24); /* bol pixel count */
+
+ LCCR2 = (epd_frame_table[0].fh - 1) /* lines per panel */
+ | (24 << 10) /* vsync pulse width - 1 */
+ | (2 << 16) /* eof pixel count */
+ | (0 << 24); /* bof pixel count */
+
+ LCCR3 = 2 /* pixel clock divisor */
+ | (24 << 8) /* AC Bias pin freq */
+ | LCCR3_16BPP /* BPP */
+ | LCCR3_PCP; /* PCP falling edge */
+
+ /* setup dma descriptor */
+ par->metromem_desc->mFDADR0 = par->metromem_desc_dma;
+ par->metromem_desc->mFSADR0 = par->metromem_dma;
+ par->metromem_desc->mFIDR0 = 0;
+ par->metromem_desc->mLDCMD0 = epd_frame_table[0].fw
+ * epd_frame_table[0].fh;
+ /* reenable lcd controller */
+ metronome_enable_lcd_controller(par);
+}
+
+static int metronome_display_cmd(struct metronomefb_par *par)
+{
+ int i;
+ u16 cs;
+ u16 opcode;
+ static u8 borderval;
+ u8 *ptr;
+
+ /* setup display command
+ we can't immediately set the opcode since the controller
+ will try parse the command before we've set it all up
+ so we just set cs here and set the opcode at the end */
+
+ ptr = par->metromem;
+
+ if (par->metromem_cmd->opcode == 0xCC40)
+ opcode = cs = 0xCC41;
+ else
+ opcode = cs = 0xCC40;
+
+ /* set the args ( 2 bytes ) for display */
+ i = 0;
+ par->metromem_cmd->args[i] = 1 << 3 /* border update */
+ | ((borderval++ % 4) & 0x0F) << 4
+ | (par->frame_count - 1) << 8;
+ cs += par->metromem_cmd->args[i++];
+
+ /* the rest are 0 */
+ memset((u8 *) (par->metromem_cmd->args + i), 0, (32-i)*2);
+
+ par->metromem_cmd->csum = cs;
+ par->metromem_cmd->opcode = opcode; /* display cmd */
+
+ i = wait_event_interruptible_timeout(par->waitq, (GPLR1 & 0x01), HZ);
+ return i;
+}
+
+static int __devinit metronome_powerup_cmd(struct metronomefb_par *par)
+{
+ int i;
+ u16 cs;
+
+ /* setup power up command */
+ par->metromem_cmd->opcode = 0x1234; /* pwr up pseudo cmd */
+ cs = par->metromem_cmd->opcode;
+
+ /* set pwr1,2,3 to 1024 */
+ for (i = 0; i < 3; i++) {
+ par->metromem_cmd->args[i] = 1024;
+ cs += par->metromem_cmd->args[i];
+ }
+
+ /* the rest are 0 */
+ memset((u8 *) (par->metromem_cmd->args + i), 0, (32-i)*2);
+
+ par->metromem_cmd->csum = cs;
+
+ msleep(1);
+ metronome_set_gpio_output(RST_GPIO_PIN, 1);
+
+ msleep(1);
+ metronome_set_gpio_output(STDBY_GPIO_PIN, 1);
+
+ i = wait_event_timeout(par->waitq, (GPLR1 & 0x01), HZ);
+ return i;
+}
+
+static int __devinit metronome_config_cmd(struct metronomefb_par *par)
+{
+ int i;
+ u16 cs;
+
+ /* setup config command
+ we can't immediately set the opcode since the controller
+ will try parse the command before we've set it all up
+ so we just set cs here and set the opcode at the end */
+
+ cs = 0xCC10;
+
+ /* set the 12 args ( 8 bytes ) for config. see spec for meanings */
+ i = 0;
+ par->metromem_cmd->args[i] = 15 /* sdlew */
+ | 2 << 8 /* sdosz */
+ | 0 << 11 /* sdor */
+ | 0 << 12 /* sdces */
+ | 0 << 15; /* sdcer */
+ cs += par->metromem_cmd->args[i++];
+
+ par->metromem_cmd->args[i] = 42 /* gdspl */
+ | 1 << 8 /* gdr1 */
+ | 1 << 9 /* sdshr */
+ | 0 << 15; /* gdspp */
+ cs += par->metromem_cmd->args[i++];
+
+ par->metromem_cmd->args[i] = 18 /* gdspw */
+ | 0 << 15; /* dispc */
+ cs += par->metromem_cmd->args[i++];
+
+ par->metromem_cmd->args[i] = 599 /* vdlc */
+ | 0 << 11 /* dsi */
+ | 0 << 12; /* dsic */
+ cs += par->metromem_cmd->args[i++];
+
+ /* the rest are 0 */
+ memset((u8 *) (par->metromem_cmd->args + i), 0, (32-i)*2);
+
+ par->metromem_cmd->csum = cs;
+ par->metromem_cmd->opcode = 0xCC10; /* config cmd */
+
+ i = wait_event_timeout(par->waitq, (GPLR1 & 0x01), HZ);
+ return i;
+}
+
+static int __devinit metronome_init_cmd(struct metronomefb_par *par)
+{
+ int i;
+ u16 cs;
+
+ /* setup init command
+ we can't immediately set the opcode since the controller
+ will try parse the command before we've set it all up
+ so we just set cs here and set the opcode at the end */
+
+ cs = 0xCC20;
+
+ /* set the args ( 2 bytes ) for init */
+ i = 0;
+ par->metromem_cmd->args[i] = 0;
+ cs += par->metromem_cmd->args[i++];
+
+ /* the rest are 0 */
+ memset((u8 *) (par->metromem_cmd->args + i), 0, (32-i)*2);
+
+ par->metromem_cmd->csum = cs;
+ par->metromem_cmd->opcode = 0xCC20; /* init cmd */
+
+ i = wait_event_timeout(par->waitq, (GPLR1 & 0x01), HZ);
+ return i;
+}
+
+static int __devinit metronome_init_regs(struct metronomefb_par *par)
+{
+ int res;
+
+ metronome_init_gpio_regs();
+ metronome_init_lcdc_regs(par);
+
+ res = metronome_powerup_cmd(par);
+ if (res)
+ return res;
+
+ res = metronome_config_cmd(par);
+ if (res)
+ return res;
+
+ res = metronome_init_cmd(par);
+ if (res)
+ return res;
+
+ return res;
+}
+
+static void metronomefb_dpy_update(struct metronomefb_par *par)
+{
+ u16 cksum;
+ unsigned char *buf = (unsigned char __force *)par->info->screen_base;
+
+ /* copy from vm to metromem */
+ memcpy(par->metromem_img, buf, DPY_W*DPY_H);
+
+ cksum = calc_img_cksum((u16 *) par->metromem_img,
+ (epd_frame_table[0].fw * DPY_H)/2);
+ *((u16 *) (par->metromem_img) +
+ (epd_frame_table[0].fw * DPY_H)/2) = cksum;
+ metronome_display_cmd(par);
+}
+
+static u16 metronomefb_dpy_update_page(struct metronomefb_par *par, int index)
+{
+ int i;
+ u16 csum = 0;
+ u16 *buf = (u16 __force *) (par->info->screen_base + index);
+ u16 *img = (u16 *) (par->metromem_img + index);
+
+ /* swizzle from vm to metromem and recalc cksum at the same time*/
+ for (i = 0; i < PAGE_SIZE/2; i++) {
+ *(img + i) = (buf[i] << 5) & 0xE0E0;
+ csum += *(img + i);
+ }
+ return csum;
+}
+
+/* this is called back from the deferred io workqueue */
+static void metronomefb_dpy_deferred_io(struct fb_info *info,
+ struct list_head *pagelist)
+{
+ u16 cksum;
+ struct page *cur;
+ struct fb_deferred_io *fbdefio = info->fbdefio;
+ struct metronomefb_par *par = info->par;
+
+ /* walk the written page list and swizzle the data */
+ list_for_each_entry(cur, &fbdefio->pagelist, lru) {
+ cksum = metronomefb_dpy_update_page(par,
+ (cur->index << PAGE_SHIFT));
+ par->metromem_img_csum -= par->csum_table[cur->index];
+ par->csum_table[cur->index] = cksum;
+ par->metromem_img_csum += cksum;
+ }
+
+ metronome_display_cmd(par);
+}
+
+static void metronomefb_fillrect(struct fb_info *info,
+ const struct fb_fillrect *rect)
+{
+ struct metronomefb_par *par = info->par;
+
+ cfb_fillrect(info, rect);
+ metronomefb_dpy_update(par);
+}
+
+static void metronomefb_copyarea(struct fb_info *info,
+ const struct fb_copyarea *area)
+{
+ struct metronomefb_par *par = info->par;
+
+ cfb_copyarea(info, area);
+ metronomefb_dpy_update(par);
+}
+
+static void metronomefb_imageblit(struct fb_info *info,
+ const struct fb_image *image)
+{
+ struct metronomefb_par *par = info->par;
+
+ cfb_imageblit(info, image);
+ metronomefb_dpy_update(par);
+}
+
+/*
+ * this is the slow path from userspace. they can seek and write to
+ * the fb. it is based on fb_sys_write
+ */
+static ssize_t metronomefb_write(struct fb_info *info, const char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ struct metronomefb_par *par = info->par;
+ unsigned long p = *ppos;
+ void *dst;
+ int err = 0;
+ unsigned long total_size;
+
+ if (info->state != FBINFO_STATE_RUNNING)
+ return -EPERM;
+
+ total_size = info->fix.smem_len;
+
+ if (p > total_size)
+ return -EFBIG;
+
+ if (count > total_size) {
+ err = -EFBIG;
+ count = total_size;
+ }
+
+ if (count + p > total_size) {
+ if (!err)
+ err = -ENOSPC;
+
+ count = total_size - p;
+ }
+
+ dst = (void __force *) (info->screen_base + p);
+
+ if (copy_from_user(dst, buf, count))
+ err = -EFAULT;
+
+ if (!err)
+ *ppos += count;
+
+ metronomefb_dpy_update(par);
+
+ return (err) ? err : count;
+}
+
+static struct fb_ops metronomefb_ops = {
+ .owner = THIS_MODULE,
+ .fb_write = metronomefb_write,
+ .fb_fillrect = metronomefb_fillrect,
+ .fb_copyarea = metronomefb_copyarea,
+ .fb_imageblit = metronomefb_imageblit,
+};
+
+static struct fb_deferred_io metronomefb_defio = {
+ .delay = HZ,
+ .deferred_io = metronomefb_dpy_deferred_io,
+};
+
+static irqreturn_t metronome_handle_irq(int irq, void *dev_id)
+{
+ struct fb_info *info = dev_id;
+ struct metronomefb_par *par = info->par;
+
+ wake_up_interruptible(&par->waitq);
+ return IRQ_HANDLED;
+}
+
+static int __devinit metronomefb_probe(struct platform_device *dev)
+{
+ struct fb_info *info;
+ int retval = -ENOMEM;
+ int videomemorysize;
+ unsigned char *videomemory;
+ struct metronomefb_par *par;
+ const struct firmware *fw_entry;
+ int cmd_size, wfm_size, img_size, padding_size, totalsize;
+ int i;
+
+ /* we have two blocks of memory.
+ info->screen_base which is vm, and is the fb used by apps.
+ par->metromem which is physically contiguous memory and
+ contains the display controller commands, waveform,
+ processed image data and padding. this is the data pulled
+ by the pxa255's LCD controller and pushed to Metronome */
+
+ videomemorysize = (DPY_W*DPY_H);
+ videomemory = vmalloc(videomemorysize);
+ if (!videomemory)
+ return retval;
+
+ memset(videomemory, 0, videomemorysize);
+
+ info = framebuffer_alloc(sizeof(struct metronomefb_par), &dev->dev);
+ if (!info)
+ goto err_vfree;
+
+ info->screen_base = (char __iomem *) videomemory;
+ info->fbops = &metronomefb_ops;
+
+ info->var = metronomefb_var;
+ info->fix = metronomefb_fix;
+ info->fix.smem_len = videomemorysize;
+ par = info->par;
+ par->info = info;
+ init_waitqueue_head(&par->waitq);
+
+ /* this table caches per page csum values. */
+ par->csum_table = vmalloc(videomemorysize/PAGE_SIZE);
+ if (!par->csum_table)
+ goto err_csum_table;
+
+ /* the metromem buffer is divided as follows:
+ command | CRC | padding
+ 16kb waveform data | CRC | padding
+ image data | CRC
+ and an extra 256 bytes for dma descriptors
+ eg: IW=832 IH=622 WS=128
+ */
+
+ cmd_size = 1 * epd_frame_table[0].fw;
+ wfm_size = ((16*1024 + 2 + epd_frame_table[0].fw - 1)
+ / epd_frame_table[0].fw) * epd_frame_table[0].fw;
+ img_size = epd_frame_table[0].fh * epd_frame_table[0].fw;
+ padding_size = 4 * epd_frame_table[0].fw;
+ totalsize = cmd_size + wfm_size + img_size + padding_size;
+ par->metromemsize = PAGE_ALIGN(totalsize + 256);
+ DPRINTK("desired memory size = %d\n", par->metromemsize);
+ dev->dev.coherent_dma_mask = 0xffffffffull;
+ par->metromem = dma_alloc_writecombine(&dev->dev, par->metromemsize,
+ &par->metromem_dma, GFP_KERNEL);
+ if (!par->metromem) {
+ printk(KERN_ERR
+ "metronomefb: unable to allocate dma buffer\n");
+ goto err_vfree;
+ }
+
+ info->fix.smem_start = par->metromem_dma;
+ par->metromem_cmd = (struct metromem_cmd *) par->metromem;
+ par->metromem_wfm = par->metromem + cmd_size;
+ par->metromem_img = par->metromem + cmd_size + wfm_size;
+ par->metromem_img_csum = (u16 *) (par->metromem_img +
+ (epd_frame_table[0].fw * DPY_H));
+ DPRINTK("img offset=0x%x\n", cmd_size + wfm_size);
+ par->metromem_desc = (struct metromem_desc *) (par->metromem + cmd_size
+ + wfm_size + img_size + padding_size);
+ par->metromem_desc_dma = par->metromem_dma + cmd_size + wfm_size
+ + img_size + padding_size;
+
+ /* load the waveform in. assume mode 3, temp 31 for now */
+ /* a) request the waveform file from userspace
+ b) process waveform and decode into metromem */
+
+ retval = request_firmware(&fw_entry, "waveform.wbf", &dev->dev);
+ if (retval < 0) {
+ printk(KERN_ERR "metronomefb: couldn't get waveform\n");
+ goto err_dma_free;
+ }
+
+ retval = load_waveform((u8 *) fw_entry->data, fw_entry->size,
+ par->metromem_wfm, 3, 31, &par->frame_count);
+ if (retval < 0) {
+ printk(KERN_ERR "metronomefb: couldn't process waveform\n");
+ goto err_ld_wfm;
+ }
+ release_firmware(fw_entry);
+
+ retval = request_irq(IRQ_GPIO(RDY_GPIO_PIN), metronome_handle_irq,
+ IRQF_DISABLED, "Metronome", info);
+ if (retval) {
+ dev_err(&dev->dev, "request_irq failed: %d\n", retval);
+ goto err_ld_wfm;
+ }
+ set_irq_type(IRQ_GPIO(RDY_GPIO_PIN), IRQT_FALLING);
+
+ retval = metronome_init_regs(par);
+ if (retval < 0)
+ goto err_free_irq;
+
+ info->flags = FBINFO_FLAG_DEFAULT;
+
+ info->fbdefio = &metronomefb_defio;
+ fb_deferred_io_init(info);
+
+ retval = fb_alloc_cmap(&info->cmap, 8, 0);
+ if (retval < 0) {
+ printk(KERN_ERR "Failed to allocate colormap\n");
+ goto err_fb_rel;
+ }
+
+ /* set cmap */
+ for (i = 0; i < 8; i++)
+ info->cmap.red[i] = (((2*i)+1)*(0xFFFF))/16;
+ memcpy(info->cmap.green, info->cmap.red, sizeof(u16)*8);
+ memcpy(info->cmap.blue, info->cmap.red, sizeof(u16)*8);
+
+ retval = register_framebuffer(info);
+ if (retval < 0)
+ goto err_cmap;
+
+ platform_set_drvdata(dev, info);
+
+ printk(KERN_INFO
+ "fb%d: Metronome frame buffer device, using %dK of video"
+ " memory\n", info->node, videomemorysize >> 10);
+
+ return 0;
+
+err_cmap:
+ fb_dealloc_cmap(&info->cmap);
+err_fb_rel:
+ framebuffer_release(info);
+err_free_irq:
+ free_irq(IRQ_GPIO(RDY_GPIO_PIN), info);
+err_ld_wfm:
+ release_firmware(fw_entry);
+err_dma_free:
+ dma_free_writecombine(&dev->dev, par->metromemsize, par->metromem,
+ par->metromem_dma);
+err_csum_table:
+ vfree(par->csum_table);
+err_vfree:
+ vfree(videomemory);
+ return retval;
+}
+
+static int __devexit metronomefb_remove(struct platform_device *dev)
+{
+ struct fb_info *info = platform_get_drvdata(dev);
+
+ if (info) {
+ struct metronomefb_par *par = info->par;
+ fb_deferred_io_cleanup(info);
+ dma_free_writecombine(&dev->dev, par->metromemsize,
+ par->metromem, par->metromem_dma);
+ fb_dealloc_cmap(&info->cmap);
+ vfree(par->csum_table);
+ unregister_framebuffer(info);
+ vfree((void __force *)info->screen_base);
+ free_irq(IRQ_GPIO(RDY_GPIO_PIN), info);
+ framebuffer_release(info);
+ }
+ return 0;
+}
+
+static struct platform_driver metronomefb_driver = {
+ .probe = metronomefb_probe,
+ .remove = metronomefb_remove,
+ .driver = {
+ .name = "metronomefb",
+ },
+};
+
+static struct platform_device *metronomefb_device;
+
+static int __init metronomefb_init(void)
+{
+ int ret;
+
+ if (!metronomefb_enable) {
+ printk(KERN_ERR
+ "Use metronomefb_enable to enable the device\n");
+ return -ENXIO;
+ }
+
+ ret = platform_driver_register(&metronomefb_driver);
+ if (!ret) {
+ metronomefb_device = platform_device_alloc("metronomefb", 0);
+ if (metronomefb_device)
+ ret = platform_device_add(metronomefb_device);
+ else
+ ret = -ENOMEM;
+
+ if (ret) {
+ platform_device_put(metronomefb_device);
+ platform_driver_unregister(&metronomefb_driver);
+ }
+ }
+ return ret;
+
+}
+
+static void __exit metronomefb_exit(void)
+{
+ platform_device_unregister(metronomefb_device);
+ platform_driver_unregister(&metronomefb_driver);
+}
+
+module_param(metronomefb_enable, uint, 0);
+MODULE_PARM_DESC(metronomefb_enable, "Enable communication with Metronome");
+
+module_init(metronomefb_init);
+module_exit(metronomefb_exit);
+
+MODULE_DESCRIPTION("fbdev driver for Metronome controller");
+MODULE_AUTHOR("Jaya Kumar");
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/nvidia/nvidia.c b/drivers/video/nvidia/nvidia.c
index 74517b1b26a..596652d2831 100644
--- a/drivers/video/nvidia/nvidia.c
+++ b/drivers/video/nvidia/nvidia.c
@@ -1066,7 +1066,7 @@ static int nvidiafb_suspend(struct pci_dev *dev, pm_message_t mesg)
acquire_console_sem();
par->pm_state = mesg.event;
- if (mesg.event == PM_EVENT_SUSPEND) {
+ if (mesg.event & PM_EVENT_SLEEP) {
fb_set_suspend(info, 1);
nvidiafb_blank(FB_BLANK_POWERDOWN, info);
nvidia_write_regs(par, &par->SavedReg);
diff --git a/drivers/video/pvr2fb.c b/drivers/video/pvr2fb.c
index 6a3d0b57489..8c863a7f654 100644
--- a/drivers/video/pvr2fb.c
+++ b/drivers/video/pvr2fb.c
@@ -1,16 +1,12 @@
-/* drivers/video/pvr2fb.c
+/*
+ * drivers/video/pvr2fb.c
*
* Frame buffer and fbcon support for the NEC PowerVR2 found within the Sega
* Dreamcast.
*
* Copyright (c) 2001 M. R. Brown <mrbrown@0xd6.org>
- * Copyright (c) 2001, 2002, 2003, 2004, 2005 Paul Mundt <lethal@linux-sh.org>
- *
- * This file is part of the LinuxDC project (linuxdc.sourceforge.net).
+ * Copyright (c) 2001 - 2008 Paul Mundt <lethal@linux-sh.org>
*
- */
-
-/*
* This driver is mostly based on the excellent amifb and vfb sources. It uses
* an odd scheme for converting hardware values to/from framebuffer values,
* here are some hacked-up formulas:
@@ -490,7 +486,7 @@ static int pvr2fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
} else {
var->sync &= ~FB_SYNC_BROADCAST;
var->vmode &= ~FB_VMODE_INTERLACED;
- var->vmode |= pvr2_var.vmode;
+ var->vmode |= FB_VMODE_NONINTERLACED;
}
if ((var->activate & FB_ACTIVATE_MASK) != FB_ACTIVATE_TEST) {
diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c
index 10f912df2da..757651954e6 100644
--- a/drivers/video/pxafb.c
+++ b/drivers/video/pxafb.c
@@ -45,6 +45,7 @@
#include <asm/irq.h>
#include <asm/div64.h>
#include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-gpio.h>
#include <asm/arch/bitfield.h>
#include <asm/arch/pxafb.h>
@@ -1046,7 +1047,7 @@ pxafb_freq_policy(struct notifier_block *nb, unsigned long val, void *data)
switch (val) {
case CPUFREQ_ADJUST:
case CPUFREQ_INCOMPATIBLE:
- printk(KERN_DEBUG "min dma period: %d ps, "
+ pr_debug("min dma period: %d ps, "
"new clock %d kHz\n", pxafb_display_dma_period(var),
policy->max);
// TODO: fill in min/max values
@@ -1361,7 +1362,7 @@ static int __init pxafb_parse_options(struct device *dev, char *options)
}
#endif
-int __init pxafb_probe(struct platform_device *dev)
+static int __init pxafb_probe(struct platform_device *dev)
{
struct pxafb_info *fbi;
struct pxafb_mach_info *inf;
@@ -1486,7 +1487,7 @@ static struct platform_driver pxafb_driver = {
};
#ifndef MODULE
-int __devinit pxafb_setup(char *options)
+static int __devinit pxafb_setup(char *options)
{
# ifdef CONFIG_FB_PXA_PARAMETERS
if (options)
@@ -1501,7 +1502,7 @@ MODULE_PARM_DESC(options, "LCD parameters (see Documentation/fb/pxafb.txt)");
# endif
#endif
-int __devinit pxafb_init(void)
+static int __devinit pxafb_init(void)
{
#ifndef MODULE
char *option = NULL;
diff --git a/drivers/video/sbuslib.c b/drivers/video/sbuslib.c
index 963a454b707..4deaac05b93 100644
--- a/drivers/video/sbuslib.c
+++ b/drivers/video/sbuslib.c
@@ -9,6 +9,7 @@
#include <linux/string.h>
#include <linux/fb.h>
#include <linux/mm.h>
+#include <linux/uaccess.h>
#include <asm/oplib.h>
#include <asm/fbio.h>
diff --git a/drivers/video/sm501fb.c b/drivers/video/sm501fb.c
index e83dfba7e63..742b5c656d6 100644
--- a/drivers/video/sm501fb.c
+++ b/drivers/video/sm501fb.c
@@ -237,12 +237,14 @@ static int sm501fb_check_var(struct fb_var_screeninfo *var,
/* check we can fit these values into the registers */
- if (var->hsync_len > 255 || var->vsync_len > 255)
+ if (var->hsync_len > 255 || var->vsync_len > 63)
return -EINVAL;
- if ((var->xres + var->right_margin) >= 4096)
+ /* hdisplay end and hsync start */
+ if ((var->xres + var->right_margin) > 4096)
return -EINVAL;
+ /* vdisplay end and vsync start */
if ((var->yres + var->lower_margin) > 2048)
return -EINVAL;
@@ -281,19 +283,21 @@ static int sm501fb_check_var(struct fb_var_screeninfo *var,
var->blue.length = var->bits_per_pixel;
var->blue.offset = 0;
var->transp.length = 0;
+ var->transp.offset = 0;
break;
case 16:
if (sm->pdata->flags & SM501_FBPD_SWAP_FB_ENDIAN) {
- var->red.offset = 11;
- var->green.offset = 5;
- var->blue.offset = 0;
- } else {
var->blue.offset = 11;
var->green.offset = 5;
var->red.offset = 0;
+ } else {
+ var->red.offset = 11;
+ var->green.offset = 5;
+ var->blue.offset = 0;
}
+ var->transp.offset = 0;
var->red.length = 5;
var->green.length = 6;
@@ -397,7 +401,7 @@ static int sm501fb_set_par_common(struct fb_info *info,
break;
case 16:
- info->fix.visual = FB_VISUAL_DIRECTCOLOR;
+ info->fix.visual = FB_VISUAL_TRUECOLOR;
break;
case 32:
@@ -613,6 +617,7 @@ static int sm501fb_set_par_crt(struct fb_info *info)
case 16:
control |= SM501_DC_CRT_CONTROL_16BPP;
+ sm501fb_setup_gamma(fbi, SM501_DC_CRT_PALETTE);
break;
case 32:
@@ -750,6 +755,7 @@ static int sm501fb_set_par_pnl(struct fb_info *info)
case 16:
control |= SM501_DC_PANEL_CONTROL_16BPP;
+ sm501fb_setup_gamma(fbi, SM501_DC_PANEL_PALETTE);
break;
case 32:
diff --git a/drivers/video/stifb.c b/drivers/video/stifb.c
index e7c8db2eb49..f98be301140 100644
--- a/drivers/video/stifb.c
+++ b/drivers/video/stifb.c
@@ -505,16 +505,24 @@ ngleSetupAttrPlanes(struct stifb_info *fb, int BufferNumber)
static void
rattlerSetupPlanes(struct stifb_info *fb)
{
+ int saved_id, y;
+
+ /* Write RAMDAC pixel read mask register so all overlay
+ * planes are display-enabled. (CRX24 uses Bt462 pixel
+ * read mask register for overlay planes, not image planes).
+ */
CRX24_SETUP_RAMDAC(fb);
- /* replacement for: SETUP_FB(fb, CRX24_OVERLAY_PLANES); */
- WRITE_WORD(0x83000300, fb, REG_14);
- SETUP_HW(fb);
- WRITE_BYTE(1, fb, REG_16b1);
+ /* change fb->id temporarily to fool SETUP_FB() */
+ saved_id = fb->id;
+ fb->id = CRX24_OVERLAY_PLANES;
+ SETUP_FB(fb);
+ fb->id = saved_id;
+
+ for (y = 0; y < fb->info.var.yres; ++y)
+ memset(fb->info.screen_base + y * fb->info.fix.line_length,
+ 0xff, fb->info.var.xres * fb->info.var.bits_per_pixel/8);
- fb_memset((void*)fb->info.fix.smem_start, 0xff,
- fb->info.var.yres*fb->info.fix.line_length);
-
CRX24_SET_OVLY_MASK(fb);
SETUP_FB(fb);
}
diff --git a/drivers/video/tridentfb.c b/drivers/video/tridentfb.c
index 70fb4ee2b42..0a4e07d43d2 100644
--- a/drivers/video/tridentfb.c
+++ b/drivers/video/tridentfb.c
@@ -564,7 +564,7 @@ static inline void write3CE(int reg, unsigned char val)
t_outb(val, 0x3CF);
}
-static inline void enable_mmio(void)
+static void enable_mmio(void)
{
/* Goto New Mode */
outb(0x0B, 0x3C4);
@@ -579,6 +579,21 @@ static inline void enable_mmio(void)
outb(inb(0x3D5) | 0x01, 0x3D5);
}
+static void disable_mmio(void)
+{
+ /* Goto New Mode */
+ t_outb(0x0B, 0x3C4);
+ t_inb(0x3C5);
+
+ /* Unprotect registers */
+ t_outb(NewMode1, 0x3C4);
+ t_outb(0x80, 0x3C5);
+
+ /* Disable MMIO */
+ t_outb(PCIReg, 0x3D4);
+ t_outb(t_inb(0x3D5) & ~0x01, 0x3D5);
+}
+
#define crtc_unlock() write3X4(CRTVSyncEnd, read3X4(CRTVSyncEnd) & 0x7F)
/* Return flat panel's maximum x resolution */
@@ -730,7 +745,7 @@ static unsigned int __devinit get_memsize(void)
switch (tmp) {
case 0x01:
- k = 512;
+ k = 512 * Kb;
break;
case 0x02:
k = 6 * Mb; /* XP */
@@ -1239,9 +1254,9 @@ static int __devinit trident_pci_probe(struct pci_dev * dev,
default_par.io_virt = ioremap_nocache(tridentfb_fix.mmio_start, tridentfb_fix.mmio_len);
if (!default_par.io_virt) {
- release_region(tridentfb_fix.mmio_start, tridentfb_fix.mmio_len);
debug("ioremap failed\n");
- return -1;
+ err = -1;
+ goto out_unmap1;
}
enable_mmio();
@@ -1252,25 +1267,21 @@ static int __devinit trident_pci_probe(struct pci_dev * dev,
if (!request_mem_region(tridentfb_fix.smem_start, tridentfb_fix.smem_len, "tridentfb")) {
debug("request_mem_region failed!\n");
+ disable_mmio();
err = -1;
- goto out_unmap;
+ goto out_unmap1;
}
fb_info.screen_base = ioremap_nocache(tridentfb_fix.smem_start,
tridentfb_fix.smem_len);
if (!fb_info.screen_base) {
- release_mem_region(tridentfb_fix.smem_start, tridentfb_fix.smem_len);
debug("ioremap failed\n");
err = -1;
- goto out_unmap;
+ goto out_unmap2;
}
output("%s board found\n", pci_name(dev));
-#if 0
- output("Trident board found : mem = %X, io = %X, mem_v = %X, io_v = %X\n",
- tridentfb_fix.smem_start, tridentfb_fix.mmio_start, fb_info.screen_base, default_par.io_virt);
-#endif
displaytype = get_displaytype();
if (flatpanel)
@@ -1288,9 +1299,12 @@ static int __devinit trident_pci_probe(struct pci_dev * dev,
if (!fb_find_mode(&default_var, &fb_info, mode, NULL, 0, NULL, bpp)) {
err = -EINVAL;
- goto out_unmap;
+ goto out_unmap2;
}
- fb_alloc_cmap(&fb_info.cmap, 256, 0);
+ err = fb_alloc_cmap(&fb_info.cmap, 256, 0);
+ if (err < 0)
+ goto out_unmap2;
+
if (defaultaccel && acc)
default_var.accel_flags |= FB_ACCELF_TEXT;
else
@@ -1300,19 +1314,24 @@ static int __devinit trident_pci_probe(struct pci_dev * dev,
fb_info.device = &dev->dev;
if (register_framebuffer(&fb_info) < 0) {
printk(KERN_ERR "tridentfb: could not register Trident framebuffer\n");
+ fb_dealloc_cmap(&fb_info.cmap);
err = -EINVAL;
- goto out_unmap;
+ goto out_unmap2;
}
output("fb%d: %s frame buffer device %dx%d-%dbpp\n",
fb_info.node, fb_info.fix.id, default_var.xres,
default_var.yres, default_var.bits_per_pixel);
return 0;
-out_unmap:
- if (default_par.io_virt)
- iounmap(default_par.io_virt);
+out_unmap2:
if (fb_info.screen_base)
iounmap(fb_info.screen_base);
+ release_mem_region(tridentfb_fix.smem_start, tridentfb_fix.smem_len);
+ disable_mmio();
+out_unmap1:
+ if (default_par.io_virt)
+ iounmap(default_par.io_virt);
+ release_mem_region(tridentfb_fix.mmio_start, tridentfb_fix.mmio_len);
return err;
}
@@ -1323,7 +1342,7 @@ static void __devexit trident_pci_remove(struct pci_dev *dev)
iounmap(par->io_virt);
iounmap(fb_info.screen_base);
release_mem_region(tridentfb_fix.smem_start, tridentfb_fix.smem_len);
- release_region(tridentfb_fix.mmio_start, tridentfb_fix.mmio_len);
+ release_mem_region(tridentfb_fix.mmio_start, tridentfb_fix.mmio_len);
}
/* List of boards that we are trying to support */
diff --git a/drivers/video/uvesafb.c b/drivers/video/uvesafb.c
index be27b9c1ed7..93361656316 100644
--- a/drivers/video/uvesafb.c
+++ b/drivers/video/uvesafb.c
@@ -44,7 +44,7 @@ static struct fb_fix_screeninfo uvesafb_fix __devinitdata = {
static int mtrr __devinitdata = 3; /* enable mtrr by default */
static int blank = 1; /* enable blanking by default */
-static int ypan __devinitdata = 1; /* 0: scroll, 1: ypan, 2: ywrap */
+static int ypan = 1; /* 0: scroll, 1: ypan, 2: ywrap */
static int pmi_setpal __devinitdata = 1; /* use PMI for palette changes */
static int nocrtc __devinitdata; /* ignore CRTC settings */
static int noedid __devinitdata; /* don't try DDC transfers */
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-16 15:06:59 +0000