summaryrefslogtreecommitdiffstats
path: root/drivers/w1/masters
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/w1/masters')
-rw-r--r--drivers/w1/masters/Kconfig48
-rw-r--r--drivers/w1/masters/Makefile13
-rw-r--r--drivers/w1/masters/ds2482.c564
-rw-r--r--drivers/w1/masters/ds_w1_bridge.c174
-rw-r--r--drivers/w1/masters/dscore.c795
-rw-r--r--drivers/w1/masters/dscore.h166
-rw-r--r--drivers/w1/masters/matrox_w1.c247
7 files changed, 2007 insertions, 0 deletions
diff --git a/drivers/w1/masters/Kconfig b/drivers/w1/masters/Kconfig
new file mode 100644
index 00000000000..c6bad4dbdc6
--- /dev/null
+++ b/drivers/w1/masters/Kconfig
@@ -0,0 +1,48 @@
+#
+# 1-wire bus master configuration
+#
+
+menu "1-wire Bus Masters"
+ depends on W1
+
+config W1_MASTER_MATROX
+ tristate "Matrox G400 transport layer for 1-wire"
+ depends on W1 && PCI
+ help
+ Say Y here if you want to communicate with your 1-wire devices
+ using Matrox's G400 GPIO pins.
+
+ This support is also available as a module. If so, the module
+ will be called matrox_w1.ko.
+
+config W1_MASTER_DS9490
+ tristate "DS9490R transport layer driver"
+ depends on W1 && USB
+ help
+ Say Y here if you want to have a driver for DS9490R UWB <-> W1 bridge.
+
+ This support is also available as a module. If so, the module
+ will be called ds9490r.ko.
+
+config W1_MASTER_DS9490_BRIDGE
+ tristate "DS9490R USB <-> W1 transport layer for 1-wire"
+ depends on W1_MASTER_DS9490
+ help
+ Say Y here if you want to communicate with your 1-wire devices
+ using DS9490R USB bridge.
+
+ This support is also available as a module. If so, the module
+ will be called ds_w1_bridge.ko.
+
+config W1_MASTER_DS2482
+ tristate "Maxim DS2482 I2C to 1-Wire bridge"
+ depends on I2C && W1 && EXPERIMENTAL
+ help
+ If you say yes here you get support for the Maxim DS2482
+ I2C to 1-Wire bridge.
+
+ This driver can also be built as a module. If so, the module
+ will be called ds2482.
+
+endmenu
+
diff --git a/drivers/w1/masters/Makefile b/drivers/w1/masters/Makefile
new file mode 100644
index 00000000000..1f3c8b983dc
--- /dev/null
+++ b/drivers/w1/masters/Makefile
@@ -0,0 +1,13 @@
+#
+# Makefile for 1-wire bus master drivers.
+#
+
+obj-$(CONFIG_W1_MASTER_MATROX) += matrox_w1.o
+
+obj-$(CONFIG_W1_MASTER_DS9490) += ds9490r.o
+ds9490r-objs := dscore.o
+
+obj-$(CONFIG_W1_MASTER_DS9490_BRIDGE) += ds_w1_bridge.o
+
+obj-$(CONFIG_W1_MASTER_DS2482) += ds2482.o
+
diff --git a/drivers/w1/masters/ds2482.c b/drivers/w1/masters/ds2482.c
new file mode 100644
index 00000000000..d1cacd23576
--- /dev/null
+++ b/drivers/w1/masters/ds2482.c
@@ -0,0 +1,564 @@
+/**
+ * ds2482.c - provides i2c to w1-master bridge(s)
+ * Copyright (C) 2005 Ben Gardner <bgardner@wabtec.com>
+ *
+ * The DS2482 is a sensor chip made by Dallas Semiconductor (Maxim).
+ * It is a I2C to 1-wire bridge.
+ * There are two variations: -100 and -800, which have 1 or 8 1-wire ports.
+ * The complete datasheet can be obtained from MAXIM's website at:
+ * http://www.maxim-ic.com/quick_view2.cfm/qv_pk/4382
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <asm/delay.h>
+
+#include "../w1.h"
+#include "../w1_int.h"
+
+/**
+ * Address is selected using 2 pins, resulting in 4 possible addresses.
+ * 0x18, 0x19, 0x1a, 0x1b
+ * However, the chip cannot be detected without doing an i2c write,
+ * so use the force module parameter.
+ */
+static unsigned short normal_i2c[] = {I2C_CLIENT_END};
+
+/**
+ * Insmod parameters
+ */
+I2C_CLIENT_INSMOD_1(ds2482);
+
+/**
+ * The DS2482 registers - there are 3 registers that are addressed by a read
+ * pointer. The read pointer is set by the last command executed.
+ *
+ * To read the data, issue a register read for any address
+ */
+#define DS2482_CMD_RESET 0xF0 /* No param */
+#define DS2482_CMD_SET_READ_PTR 0xE1 /* Param: DS2482_PTR_CODE_xxx */
+#define DS2482_CMD_CHANNEL_SELECT 0xC3 /* Param: Channel byte - DS2482-800 only */
+#define DS2482_CMD_WRITE_CONFIG 0xD2 /* Param: Config byte */
+#define DS2482_CMD_1WIRE_RESET 0xB4 /* Param: None */
+#define DS2482_CMD_1WIRE_SINGLE_BIT 0x87 /* Param: Bit byte (bit7) */
+#define DS2482_CMD_1WIRE_WRITE_BYTE 0xA5 /* Param: Data byte */
+#define DS2482_CMD_1WIRE_READ_BYTE 0x96 /* Param: None */
+/* Note to read the byte, Set the ReadPtr to Data then read (any addr) */
+#define DS2482_CMD_1WIRE_TRIPLET 0x78 /* Param: Dir byte (bit7) */
+
+/* Values for DS2482_CMD_SET_READ_PTR */
+#define DS2482_PTR_CODE_STATUS 0xF0
+#define DS2482_PTR_CODE_DATA 0xE1
+#define DS2482_PTR_CODE_CHANNEL 0xD2 /* DS2482-800 only */
+#define DS2482_PTR_CODE_CONFIG 0xC3
+
+/**
+ * Configure Register bit definitions
+ * The top 4 bits always read 0.
+ * To write, the top nibble must be the 1's compl. of the low nibble.
+ */
+#define DS2482_REG_CFG_1WS 0x08
+#define DS2482_REG_CFG_SPU 0x04
+#define DS2482_REG_CFG_PPM 0x02
+#define DS2482_REG_CFG_APU 0x01
+
+
+/**
+ * Write and verify codes for the CHANNEL_SELECT command (DS2482-800 only).
+ * To set the channel, write the value at the index of the channel.
+ * Read and compare against the corresponding value to verify the change.
+ */
+static const u8 ds2482_chan_wr[8] =
+ { 0xF0, 0xE1, 0xD2, 0xC3, 0xB4, 0xA5, 0x96, 0x87 };
+static const u8 ds2482_chan_rd[8] =
+ { 0xB8, 0xB1, 0xAA, 0xA3, 0x9C, 0x95, 0x8E, 0x87 };
+
+
+/**
+ * Status Register bit definitions (read only)
+ */
+#define DS2482_REG_STS_DIR 0x80
+#define DS2482_REG_STS_TSB 0x40
+#define DS2482_REG_STS_SBR 0x20
+#define DS2482_REG_STS_RST 0x10
+#define DS2482_REG_STS_LL 0x08
+#define DS2482_REG_STS_SD 0x04
+#define DS2482_REG_STS_PPD 0x02
+#define DS2482_REG_STS_1WB 0x01
+
+
+static int ds2482_attach_adapter(struct i2c_adapter *adapter);
+static int ds2482_detect(struct i2c_adapter *adapter, int address, int kind);
+static int ds2482_detach_client(struct i2c_client *client);
+
+
+/**
+ * Driver data (common to all clients)
+ */
+static struct i2c_driver ds2482_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "ds2482",
+ },
+ .attach_adapter = ds2482_attach_adapter,
+ .detach_client = ds2482_detach_client,
+};
+
+/*
+ * Client data (each client gets its own)
+ */
+
+struct ds2482_data;
+
+struct ds2482_w1_chan {
+ struct ds2482_data *pdev;
+ u8 channel;
+ struct w1_bus_master w1_bm;
+};
+
+struct ds2482_data {
+ struct i2c_client client;
+ struct semaphore access_lock;
+
+ /* 1-wire interface(s) */
+ int w1_count; /* 1 or 8 */
+ struct ds2482_w1_chan w1_ch[8];
+
+ /* per-device values */
+ u8 channel;
+ u8 read_prt; /* see DS2482_PTR_CODE_xxx */
+ u8 reg_config;
+};
+
+
+/**
+ * Sets the read pointer.
+ * @param pdev The ds2482 client pointer
+ * @param read_ptr see DS2482_PTR_CODE_xxx above
+ * @return -1 on failure, 0 on success
+ */
+static inline int ds2482_select_register(struct ds2482_data *pdev, u8 read_ptr)
+{
+ if (pdev->read_prt != read_ptr) {
+ if (i2c_smbus_write_byte_data(&pdev->client,
+ DS2482_CMD_SET_READ_PTR,
+ read_ptr) < 0)
+ return -1;
+
+ pdev->read_prt = read_ptr;
+ }
+ return 0;
+}
+
+/**
+ * Sends a command without a parameter
+ * @param pdev The ds2482 client pointer
+ * @param cmd DS2482_CMD_RESET,
+ * DS2482_CMD_1WIRE_RESET,
+ * DS2482_CMD_1WIRE_READ_BYTE
+ * @return -1 on failure, 0 on success
+ */
+static inline int ds2482_send_cmd(struct ds2482_data *pdev, u8 cmd)
+{
+ if (i2c_smbus_write_byte(&pdev->client, cmd) < 0)
+ return -1;
+
+ pdev->read_prt = DS2482_PTR_CODE_STATUS;
+ return 0;
+}
+
+/**
+ * Sends a command with a parameter
+ * @param pdev The ds2482 client pointer
+ * @param cmd DS2482_CMD_WRITE_CONFIG,
+ * DS2482_CMD_1WIRE_SINGLE_BIT,
+ * DS2482_CMD_1WIRE_WRITE_BYTE,
+ * DS2482_CMD_1WIRE_TRIPLET
+ * @param byte The data to send
+ * @return -1 on failure, 0 on success
+ */
+static inline int ds2482_send_cmd_data(struct ds2482_data *pdev,
+ u8 cmd, u8 byte)
+{
+ if (i2c_smbus_write_byte_data(&pdev->client, cmd, byte) < 0)
+ return -1;
+
+ /* all cmds leave in STATUS, except CONFIG */
+ pdev->read_prt = (cmd != DS2482_CMD_WRITE_CONFIG) ?
+ DS2482_PTR_CODE_STATUS : DS2482_PTR_CODE_CONFIG;
+ return 0;
+}
+
+
+/*
+ * 1-Wire interface code
+ */
+
+#define DS2482_WAIT_IDLE_TIMEOUT 100
+
+/**
+ * Waits until the 1-wire interface is idle (not busy)
+ *
+ * @param pdev Pointer to the device structure
+ * @return the last value read from status or -1 (failure)
+ */
+static int ds2482_wait_1wire_idle(struct ds2482_data *pdev)
+{
+ int temp = -1;
+ int retries = 0;
+
+ if (!ds2482_select_register(pdev, DS2482_PTR_CODE_STATUS)) {
+ do {
+ temp = i2c_smbus_read_byte(&pdev->client);
+ } while ((temp >= 0) && (temp & DS2482_REG_STS_1WB) &&
+ (++retries > DS2482_WAIT_IDLE_TIMEOUT));
+ }
+
+ if (retries > DS2482_WAIT_IDLE_TIMEOUT)
+ printk(KERN_ERR "%s: timeout on channel %d\n",
+ __func__, pdev->channel);
+
+ return temp;
+}
+
+/**
+ * Selects a w1 channel.
+ * The 1-wire interface must be idle before calling this function.
+ *
+ * @param pdev The ds2482 client pointer
+ * @param channel 0-7
+ * @return -1 (failure) or 0 (success)
+ */
+static int ds2482_set_channel(struct ds2482_data *pdev, u8 channel)
+{
+ if (i2c_smbus_write_byte_data(&pdev->client, DS2482_CMD_CHANNEL_SELECT,
+ ds2482_chan_wr[channel]) < 0)
+ return -1;
+
+ pdev->read_prt = DS2482_PTR_CODE_CHANNEL;
+ pdev->channel = -1;
+ if (i2c_smbus_read_byte(&pdev->client) == ds2482_chan_rd[channel]) {
+ pdev->channel = channel;
+ return 0;
+ }
+ return -1;
+}
+
+
+/**
+ * Performs the touch-bit function, which writes a 0 or 1 and reads the level.
+ *
+ * @param data The ds2482 channel pointer
+ * @param bit The level to write: 0 or non-zero
+ * @return The level read: 0 or 1
+ */
+static u8 ds2482_w1_touch_bit(void *data, u8 bit)
+{
+ struct ds2482_w1_chan *pchan = data;
+ struct ds2482_data *pdev = pchan->pdev;
+ int status = -1;
+
+ down(&pdev->access_lock);
+
+ /* Select the channel */
+ ds2482_wait_1wire_idle(pdev);
+ if (pdev->w1_count > 1)
+ ds2482_set_channel(pdev, pchan->channel);
+
+ /* Send the touch command, wait until 1WB == 0, return the status */
+ if (!ds2482_send_cmd_data(pdev, DS2482_CMD_1WIRE_SINGLE_BIT,
+ bit ? 0xFF : 0))
+ status = ds2482_wait_1wire_idle(pdev);
+
+ up(&pdev->access_lock);
+
+ return (status & DS2482_REG_STS_SBR) ? 1 : 0;
+}
+
+/**
+ * Performs the triplet function, which reads two bits and writes a bit.
+ * The bit written is determined by the two reads:
+ * 00 => dbit, 01 => 0, 10 => 1
+ *
+ * @param data The ds2482 channel pointer
+ * @param dbit The direction to choose if both branches are valid
+ * @return b0=read1 b1=read2 b3=bit written
+ */
+static u8 ds2482_w1_triplet(void *data, u8 dbit)
+{
+ struct ds2482_w1_chan *pchan = data;
+ struct ds2482_data *pdev = pchan->pdev;
+ int status = (3 << 5);
+
+ down(&pdev->access_lock);
+
+ /* Select the channel */
+ ds2482_wait_1wire_idle(pdev);
+ if (pdev->w1_count > 1)
+ ds2482_set_channel(pdev, pchan->channel);
+
+ /* Send the triplet command, wait until 1WB == 0, return the status */
+ if (!ds2482_send_cmd_data(pdev, DS2482_CMD_1WIRE_TRIPLET,
+ dbit ? 0xFF : 0))
+ status = ds2482_wait_1wire_idle(pdev);
+
+ up(&pdev->access_lock);
+
+ /* Decode the status */
+ return (status >> 5);
+}
+
+/**
+ * Performs the write byte function.
+ *
+ * @param data The ds2482 channel pointer
+ * @param byte The value to write
+ */
+static void ds2482_w1_write_byte(void *data, u8 byte)
+{
+ struct ds2482_w1_chan *pchan = data;
+ struct ds2482_data *pdev = pchan->pdev;
+
+ down(&pdev->access_lock);
+
+ /* Select the channel */
+ ds2482_wait_1wire_idle(pdev);
+ if (pdev->w1_count > 1)
+ ds2482_set_channel(pdev, pchan->channel);
+
+ /* Send the write byte command */
+ ds2482_send_cmd_data(pdev, DS2482_CMD_1WIRE_WRITE_BYTE, byte);
+
+ up(&pdev->access_lock);
+}
+
+/**
+ * Performs the read byte function.
+ *
+ * @param data The ds2482 channel pointer
+ * @return The value read
+ */
+static u8 ds2482_w1_read_byte(void *data)
+{
+ struct ds2482_w1_chan *pchan = data;
+ struct ds2482_data *pdev = pchan->pdev;
+ int result;
+
+ down(&pdev->access_lock);
+
+ /* Select the channel */
+ ds2482_wait_1wire_idle(pdev);
+ if (pdev->w1_count > 1)
+ ds2482_set_channel(pdev, pchan->channel);
+
+ /* Send the read byte command */
+ ds2482_send_cmd(pdev, DS2482_CMD_1WIRE_READ_BYTE);
+
+ /* Wait until 1WB == 0 */
+ ds2482_wait_1wire_idle(pdev);
+
+ /* Select the data register */
+ ds2482_select_register(pdev, DS2482_PTR_CODE_DATA);
+
+ /* Read the data byte */
+ result = i2c_smbus_read_byte(&pdev->client);
+
+ up(&pdev->access_lock);
+
+ return result;
+}
+
+
+/**
+ * Sends a reset on the 1-wire interface
+ *
+ * @param data The ds2482 channel pointer
+ * @return 0=Device present, 1=No device present or error
+ */
+static u8 ds2482_w1_reset_bus(void *data)
+{
+ struct ds2482_w1_chan *pchan = data;
+ struct ds2482_data *pdev = pchan->pdev;
+ int err;
+ u8 retval = 1;
+
+ down(&pdev->access_lock);
+
+ /* Select the channel */
+ ds2482_wait_1wire_idle(pdev);
+ if (pdev->w1_count > 1)
+ ds2482_set_channel(pdev, pchan->channel);
+
+ /* Send the reset command */
+ err = ds2482_send_cmd(pdev, DS2482_CMD_1WIRE_RESET);
+ if (err >= 0) {
+ /* Wait until the reset is complete */
+ err = ds2482_wait_1wire_idle(pdev);
+ retval = !(err & DS2482_REG_STS_PPD);
+
+ /* If the chip did reset since detect, re-config it */
+ if (err & DS2482_REG_STS_RST)
+ ds2482_send_cmd_data(pdev, DS2482_CMD_WRITE_CONFIG,
+ 0xF0);
+ }
+
+ up(&pdev->access_lock);
+
+ return retval;
+}
+
+
+/**
+ * Called to see if the device exists on an i2c bus.
+ */
+static int ds2482_attach_adapter(struct i2c_adapter *adapter)
+{
+ return i2c_probe(adapter, &addr_data, ds2482_detect);
+}
+
+
+/*
+ * The following function does more than just detection. If detection
+ * succeeds, it also registers the new chip.
+ */
+static int ds2482_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+ struct ds2482_data *data;
+ struct i2c_client *new_client;
+ int err = 0;
+ int temp1;
+ int idx;
+
+ if (!i2c_check_functionality(adapter,
+ I2C_FUNC_SMBUS_WRITE_BYTE_DATA |
+ I2C_FUNC_SMBUS_BYTE))
+ goto exit;
+
+ if (!(data = kzalloc(sizeof(struct ds2482_data), GFP_KERNEL))) {
+ err = -ENOMEM;
+ goto exit;
+ }
+
+ new_client = &data->client;
+ i2c_set_clientdata(new_client, data);
+ new_client->addr = address;
+ new_client->driver = &ds2482_driver;
+ new_client->adapter = adapter;
+
+ /* Reset the device (sets the read_ptr to status) */
+ if (ds2482_send_cmd(data, DS2482_CMD_RESET) < 0) {
+ dev_dbg(&adapter->dev, "DS2482 reset failed at 0x%02x.\n",
+ address);
+ goto exit_free;
+ }
+
+ /* Sleep at least 525ns to allow the reset to complete */
+ ndelay(525);
+
+ /* Read the status byte - only reset bit and line should be set */
+ temp1 = i2c_smbus_read_byte(new_client);
+ if (temp1 != (DS2482_REG_STS_LL | DS2482_REG_STS_RST)) {
+ dev_dbg(&adapter->dev, "DS2482 (0x%02x) reset status "
+ "0x%02X - not a DS2482\n", address, temp1);
+ goto exit_free;
+ }
+
+ /* Detect the 8-port version */
+ data->w1_count = 1;
+ if (ds2482_set_channel(data, 7) == 0)
+ data->w1_count = 8;
+
+ /* Set all config items to 0 (off) */
+ ds2482_send_cmd_data(data, DS2482_CMD_WRITE_CONFIG, 0xF0);
+
+ /* We can fill in the remaining client fields */
+ snprintf(new_client->name, sizeof(new_client->name), "ds2482-%d00",
+ data->w1_count);
+
+ init_MUTEX(&data->access_lock);
+
+ /* Tell the I2C layer a new client has arrived */
+ if ((err = i2c_attach_client(new_client)))
+ goto exit_free;
+
+ /* Register 1-wire interface(s) */
+ for (idx = 0; idx < data->w1_count; idx++) {
+ data->w1_ch[idx].pdev = data;
+ data->w1_ch[idx].channel = idx;
+
+ /* Populate all the w1 bus master stuff */
+ data->w1_ch[idx].w1_bm.data = &data->w1_ch[idx];
+ data->w1_ch[idx].w1_bm.read_byte = ds2482_w1_read_byte;
+ data->w1_ch[idx].w1_bm.write_byte = ds2482_w1_write_byte;
+ data->w1_ch[idx].w1_bm.touch_bit = ds2482_w1_touch_bit;
+ data->w1_ch[idx].w1_bm.triplet = ds2482_w1_triplet;
+ data->w1_ch[idx].w1_bm.reset_bus = ds2482_w1_reset_bus;
+
+ err = w1_add_master_device(&data->w1_ch[idx].w1_bm);
+ if (err) {
+ data->w1_ch[idx].pdev = NULL;
+ goto exit_w1_remove;
+ }
+ }
+
+ return 0;
+
+exit_w1_remove:
+ i2c_detach_client(new_client);
+
+ for (idx = 0; idx < data->w1_count; idx++) {
+ if (data->w1_ch[idx].pdev != NULL)
+ w1_remove_master_device(&data->w1_ch[idx].w1_bm);
+ }
+exit_free:
+ kfree(data);
+exit:
+ return err;
+}
+
+static int ds2482_detach_client(struct i2c_client *client)
+{
+ struct ds2482_data *data = i2c_get_clientdata(client);
+ int err, idx;
+
+ /* Unregister the 1-wire bridge(s) */
+ for (idx = 0; idx < data->w1_count; idx++) {
+ if (data->w1_ch[idx].pdev != NULL)
+ w1_remove_master_device(&data->w1_ch[idx].w1_bm);
+ }
+
+ /* Detach the i2c device */
+ if ((err = i2c_detach_client(client))) {
+ dev_err(&client->dev,
+ "Deregistration failed, client not detached.\n");
+ return err;
+ }
+
+ /* Free the memory */
+ kfree(data);
+ return 0;
+}
+
+static int __init sensors_ds2482_init(void)
+{
+ return i2c_add_driver(&ds2482_driver);
+}
+
+static void __exit sensors_ds2482_exit(void)
+{
+ i2c_del_driver(&ds2482_driver);
+}
+
+MODULE_AUTHOR("Ben Gardner <bgardner@wabtec.com>");
+MODULE_DESCRIPTION("DS2482 driver");
+MODULE_LICENSE("GPL");
+
+module_init(sensors_ds2482_init);
+module_exit(sensors_ds2482_exit);
diff --git a/drivers/w1/masters/ds_w1_bridge.c b/drivers/w1/masters/ds_w1_bridge.c
new file mode 100644
index 00000000000..5d30783a3eb
--- /dev/null
+++ b/drivers/w1/masters/ds_w1_bridge.c
@@ -0,0 +1,174 @@
+/*
+ * ds_w1_bridge.c
+ *
+ * Copyright (c) 2004 Evgeniy Polyakov <johnpol@2ka.mipt.ru>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+
+#include "../w1.h"
+#include "../w1_int.h"
+#include "dscore.h"
+
+static struct ds_device *ds_dev;
+static struct w1_bus_master *ds_bus_master;
+
+static u8 ds9490r_touch_bit(void *data, u8 bit)
+{
+ u8 ret;
+ struct ds_device *dev = data;
+
+ if (ds_touch_bit(dev, bit, &ret))
+ return 0;
+
+ return ret;
+}
+
+static void ds9490r_write_bit(void *data, u8 bit)
+{
+ struct ds_device *dev = data;
+
+ ds_write_bit(dev, bit);
+}
+
+static void ds9490r_write_byte(void *data, u8 byte)
+{
+ struct ds_device *dev = data;
+
+ ds_write_byte(dev, byte);
+}
+
+static u8 ds9490r_read_bit(void *data)
+{
+ struct ds_device *dev = data;
+ int err;
+ u8 bit = 0;
+
+ err = ds_touch_bit(dev, 1, &bit);
+ if (err)
+ return 0;
+ //err = ds_read_bit(dev, &bit);
+ //if (err)
+ // return 0;
+
+ return bit & 1;
+}
+
+static u8 ds9490r_read_byte(void *data)
+{
+ struct ds_device *dev = data;
+ int err;
+ u8 byte = 0;
+
+ err = ds_read_byte(dev, &byte);
+ if (err)
+ return 0;
+
+ return byte;
+}
+
+static void ds9490r_write_block(void *data, const u8 *buf, int len)
+{
+ struct ds_device *dev = data;
+
+ ds_write_block(dev, (u8 *)buf, len);
+}
+
+static u8 ds9490r_read_block(void *data, u8 *buf, int len)
+{
+ struct ds_device *dev = data;
+ int err;
+
+ err = ds_read_block(dev, buf, len);
+ if (err < 0)
+ return 0;
+
+ return len;
+}
+
+static u8 ds9490r_reset(void *data)
+{
+ struct ds_device *dev = data;
+ struct ds_status st;
+ int err;
+
+ memset(&st, 0, sizeof(st));
+
+ err = ds_reset(dev, &st);
+ if (err)
+ return 1;
+
+ return 0;
+}
+
+static int __devinit ds_w1_init(void)
+{
+ int err;
+
+ ds_bus_master = kmalloc(sizeof(*ds_bus_master), GFP_KERNEL);
+ if (!ds_bus_master) {
+ printk(KERN_ERR "Failed to allocate DS9490R USB<->W1 bus_master structure.\n");
+ return -ENOMEM;
+ }
+
+ ds_dev = ds_get_device();
+ if (!ds_dev) {
+ printk(KERN_ERR "DS9490R is not registered.\n");
+ err = -ENODEV;
+ goto err_out_free_bus_master;
+ }
+
+ memset(ds_bus_master, 0, sizeof(*ds_bus_master));
+
+ ds_bus_master->data = ds_dev;
+ ds_bus_master->touch_bit = &ds9490r_touch_bit;
+ ds_bus_master->read_bit = &ds9490r_read_bit;
+ ds_bus_master->write_bit = &ds9490r_write_bit;
+ ds_bus_master->read_byte = &ds9490r_read_byte;
+ ds_bus_master->write_byte = &ds9490r_write_byte;
+ ds_bus_master->read_block = &ds9490r_read_block;
+ ds_bus_master->write_block = &ds9490r_write_block;
+ ds_bus_master->reset_bus = &ds9490r_reset;
+
+ err = w1_add_master_device(ds_bus_master);
+ if (err)
+ goto err_out_put_device;
+
+ return 0;
+
+err_out_put_device:
+ ds_put_device(ds_dev);
+err_out_free_bus_master:
+ kfree(ds_bus_master);
+
+ return err;
+}
+
+static void __devexit ds_w1_fini(void)
+{
+ w1_remove_master_device(ds_bus_master);
+ ds_put_device(ds_dev);
+ kfree(ds_bus_master);
+}
+
+module_init(ds_w1_init);
+module_exit(ds_w1_fini);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Evgeniy Polyakov <johnpol@2ka.mipt.ru>");
diff --git a/drivers/w1/masters/dscore.c b/drivers/w1/masters/dscore.c
new file mode 100644
index 00000000000..2cf7776a708
--- /dev/null
+++ b/drivers/w1/masters/dscore.c
@@ -0,0 +1,795 @@
+/*
+ * dscore.c
+ *
+ * Copyright (c) 2004 Evgeniy Polyakov <johnpol@2ka.mipt.ru>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/mod_devicetable.h>
+#include <linux/usb.h>
+
+#include "dscore.h"
+
+static struct usb_device_id ds_id_table [] = {
+ { USB_DEVICE(0x04fa, 0x2490) },
+ { },
+};
+MODULE_DEVICE_TABLE(usb, ds_id_table);
+
+static int ds_probe(struct usb_interface *, const struct usb_device_id *);
+static void ds_disconnect(struct usb_interface *);
+
+int ds_touch_bit(struct ds_device *, u8, u8 *);
+int ds_read_byte(struct ds_device *, u8 *);
+int ds_read_bit(struct ds_device *, u8 *);
+int ds_write_byte(struct ds_device *, u8);
+int ds_write_bit(struct ds_device *, u8);
+static int ds_start_pulse(struct ds_device *, int);
+int ds_reset(struct ds_device *, struct ds_status *);
+struct ds_device * ds_get_device(void);
+void ds_put_device(struct ds_device *);
+
+static inline void ds_dump_status(unsigned char *, unsigned char *, int);
+static int ds_send_control(struct ds_device *, u16, u16);
+static int ds_send_control_mode(struct ds_device *, u16, u16);
+static int ds_send_control_cmd(struct ds_device *, u16, u16);
+
+
+static struct usb_driver ds_driver = {
+ .name = "DS9490R",
+ .probe = ds_probe,
+ .disconnect = ds_disconnect,
+ .id_table = ds_id_table,
+};
+
+static struct ds_device *ds_dev;
+
+struct ds_device * ds_get_device(void)
+{
+ if (ds_dev)
+ atomic_inc(&ds_dev->refcnt);
+ return ds_dev;
+}
+
+void ds_put_device(struct ds_device *dev)
+{
+ atomic_dec(&dev->refcnt);
+}
+
+static int ds_send_control_cmd(struct ds_device *dev, u16 value, u16 index)
+{
+ int err;
+
+ err = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, dev->ep[EP_CONTROL]),
+ CONTROL_CMD, 0x40, value, index, NULL, 0, 1000);
+ if (err < 0) {
+ printk(KERN_ERR "Failed to send command control message %x.%x: err=%d.\n",
+ value, index, err);
+ return err;
+ }
+
+ return err;
+}
+
+static int ds_send_control_mode(struct ds_device *dev, u16 value, u16 index)
+{
+ int err;
+
+ err = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, dev->ep[EP_CONTROL]),
+ MODE_CMD, 0x40, value, index, NULL, 0, 1000);
+ if (err < 0) {
+ printk(KERN_ERR "Failed to send mode control message %x.%x: err=%d.\n",
+ value, index, err);
+ return err;
+ }
+
+ return err;
+}
+
+static int ds_send_control(struct ds_device *dev, u16 value, u16 index)
+{
+ int err;
+
+ err = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, dev->ep[EP_CONTROL]),
+ COMM_CMD, 0x40, value, index, NULL, 0, 1000);
+ if (err < 0) {
+ printk(KERN_ERR "Failed to send control message %x.%x: err=%d.\n",
+ value, index, err);
+ return err;
+ }
+
+ return err;
+}
+
+static inline void ds_dump_status(unsigned char *buf, unsigned char *str, int off)
+{
+ printk("%45s: %8x\n", str, buf[off]);
+}
+
+static int ds_recv_status_nodump(struct ds_device *dev, struct ds_status *st,
+ unsigned char *buf, int size)
+{
+ int count, err;
+
+ memset(st, 0, sizeof(st));
+
+ count = 0;
+ err = usb_bulk_msg(dev->udev, usb_rcvbulkpipe(dev->udev, dev->ep[EP_STATUS]), buf, size, &count, 100);
+ if (err < 0) {
+ printk(KERN_ERR "Failed to read 1-wire data from 0x%x: err=%d.\n", dev->ep[EP_STATUS], err);
+ return err;
+ }
+
+ if (count >= sizeof(*st))
+ memcpy(st, buf, sizeof(*st));
+
+ return count;
+}
+
+static int ds_recv_status(struct ds_device *dev, struct ds_status *st)
+{
+ unsigned char buf[64];
+ int count, err = 0, i;
+
+ memcpy(st, buf, sizeof(*st));
+
+ count = ds_recv_status_nodump(dev, st, buf, sizeof(buf));
+ if (count < 0)
+ return err;
+
+ printk("0x%x: count=%d, status: ", dev->ep[EP_STATUS], count);
+ for (i=0; i<count; ++i)
+ printk("%02x ", buf[i]);
+ printk("\n");
+
+ if (count >= 16) {
+ ds_dump_status(buf, "enable flag", 0);
+ ds_dump_status(buf, "1-wire speed", 1);
+ ds_dump_status(buf, "strong pullup duration", 2);
+ ds_dump_status(buf, "programming pulse duration", 3);
+ ds_dump_status(buf, "pulldown slew rate control", 4);
+ ds_dump_status(buf, "write-1 low time", 5);
+ ds_dump_status(buf, "data sample offset/write-0 recovery time", 6);
+ ds_dump_status(buf, "reserved (test register)", 7);
+ ds_dump_status(buf, "device status flags", 8);
+ ds_dump_status(buf, "communication command byte 1", 9);
+ ds_dump_status(buf, "communication command byte 2", 10);
+ ds_dump_status(buf, "communication command buffer status", 11);
+ ds_dump_status(buf, "1-wire data output buffer status", 12);
+ ds_dump_status(buf, "1-wire data input buffer status", 13);
+ ds_dump_status(buf, "reserved", 14);
+ ds_dump_status(buf, "reserved", 15);
+ }
+
+ memcpy(st, buf, sizeof(*st));
+
+ if (st->status & ST_EPOF) {
+ printk(KERN_INFO "Resetting device after ST_EPOF.\n");
+ err = ds_send_control_cmd(dev, CTL_RESET_DEVICE, 0);
+ if (err)
+ return err;
+ count = ds_recv_status_nodump(dev, st, buf, sizeof(buf));
+ if (count < 0)
+ return err;
+ }
+#if 0
+ if (st->status & ST_IDLE) {
+ printk(KERN_INFO "Resetting pulse after ST_IDLE.\n");
+ err = ds_start_pulse(dev, PULLUP_PULSE_DURATION);
+ if (err)
+ return err;
+ }
+#endif
+
+ return err;
+}
+
+static int ds_recv_data(struct ds_device *dev, unsigned char *buf, int size)
+{
+ int count, err;
+ struct ds_status st;
+
+ count = 0;
+ err = usb_bulk_msg(dev->udev, usb_rcvbulkpipe(dev->udev, dev->ep[EP_DATA_IN]),
+ buf, size, &count, 1000);
+ if (err < 0) {
+ printk(KERN_INFO "Clearing ep0x%x.\n", dev->ep[EP_DATA_IN]);
+ usb_clear_halt(dev->udev, usb_rcvbulkpipe(dev->udev, dev->ep[EP_DATA_IN]));
+ ds_recv_status(dev, &st);
+ return err;
+ }
+
+#if 0
+ {
+ int i;
+
+ printk("%s: count=%d: ", __func__, count);
+ for (i=0; i<count; ++i)
+ printk("%02x ", buf[i]);
+ printk("\n");
+ }
+#endif
+ return count;
+}
+
+static int ds_send_data(struct ds_device *dev, unsigned char *buf, int len)
+{
+ int count, err;
+
+ count = 0;
+ err = usb_bulk_msg(dev->udev, usb_sndbulkpipe(dev->udev, dev->ep[EP_DATA_OUT]), buf, len, &count, 1000);
+ if (err < 0) {
+ printk(KERN_ERR "Failed to read 1-wire data from 0x02: err=%d.\n", err);
+ return err;
+ }
+
+ return err;
+}
+
+#if 0
+
+int ds_stop_pulse(struct ds_device *dev, int limit)
+{
+ struct ds_status st;
+ int count = 0, err = 0;
+ u8 buf[0x20];
+
+ do {
+ err = ds_send_control(dev, CTL_HALT_EXE_IDLE, 0);
+ if (err)
+ break;
+ err = ds_send_control(dev, CTL_RESUME_EXE, 0);
+ if (err)
+ break;
+ err = ds_recv_status_nodump(dev, &st, buf, sizeof(buf));
+ if (err)
+ break;
+
+ if ((st.status & ST_SPUA) == 0) {
+ err = ds_send_control_mode(dev, MOD_PULSE_EN, 0);
+ if (err)
+ break;
+ }
+ } while(++count < limit);
+
+ return err;
+}
+
+int ds_detect(struct ds_device *dev, struct ds_status *st)
+{
+ int err;
+
+ err = ds_send_control_cmd(dev, CTL_RESET_DEVICE, 0);
+ if (err)
+ return err;
+
+ err = ds_send_control(dev, COMM_SET_DURATION | COMM_IM, 0);
+ if (err)
+ return err;
+
+ err = ds_send_control(dev, COMM_SET_DURATION | COMM_IM | COMM_TYPE, 0x40);
+ if (err)
+ return err;
+
+ err = ds_send_control_mode(dev, MOD_PULSE_EN, PULSE_PROG);
+ if (err)
+ return err;
+
+ err = ds_recv_status(dev, st);
+
+ return err;
+}
+
+#endif /* 0 */
+
+static int ds_wait_status(struct ds_device *dev, struct ds_status *st)
+{
+ u8 buf[0x20];
+ int err, count = 0;
+
+ do {
+ err = ds_recv_status_nodump(dev, st, buf, sizeof(buf));
+#if 0
+ if (err >= 0) {
+ int i;
+ printk("0x%x: count=%d, status: ", dev->ep[EP_STATUS], err);
+ for (i=0; i<err; ++i)
+ printk("%02x ", buf[i]);
+ printk("\n");
+ }
+#endif
+ } while(!(buf[0x08] & 0x20) && !(err < 0) && ++count < 100);
+
+
+ if (((err > 16) && (buf[0x10] & 0x01)) || count >= 100 || err < 0) {
+ ds_recv_status(dev, st);
+ return -1;
+ } else
+ return 0;
+}
+
+int ds_reset(struct ds_device *dev, struct ds_status *st)
+{
+ int err;
+
+ //err = ds_send_control(dev, COMM_1_WIRE_RESET | COMM_F | COMM_IM | COMM_SE, SPEED_FLEXIBLE);
+ err = ds_send_control(dev, 0x43, SPEED_NORMAL);
+ if (err)
+ return err;
+
+ ds_wait_status(dev, st);
+#if 0
+ if (st->command_buffer_status) {
+ printk(KERN_INFO "Short circuit.\n");
+ return -EIO;
+ }
+#endif
+
+ return 0;
+}
+
+#if 0
+int ds_set_speed(struct ds_device *dev, int speed)
+{
+ int err;
+
+ if (speed != SPEED_NORMAL && speed != SPEED_FLEXIBLE && speed != SPEED_OVERDRIVE)
+ return -EINVAL;
+
+ if (speed != SPEED_OVERDRIVE)
+ speed = SPEED_FLEXIBLE;
+
+ speed &= 0xff;
+
+ err = ds_send_control_mode(dev, MOD_1WIRE_SPEED, speed);
+ if (err)
+ return err;
+
+ return err;
+}
+#endif /* 0 */
+
+static int ds_start_pulse(struct ds_device *dev, int delay)
+{
+ int err;
+ u8 del = 1 + (u8)(delay >> 4);
+ struct ds_status st;
+
+#if 0
+ err = ds_stop_pulse(dev, 10);
+ if (err)
+ return err;
+
+ err = ds_send_control_mode(dev, MOD_PULSE_EN, PULSE_SPUE);
+ if (err)
+ return err;
+#endif
+ err = ds_send_control(dev, COMM_SET_DURATION | COMM_IM, del);
+ if (err)
+ return err;
+
+ err = ds_send_control(dev, COMM_PULSE | COMM_IM | COMM_F, 0);
+ if (err)
+ return err;
+
+ mdelay(delay);
+
+ ds_wait_status(dev, &st);
+
+ return err;
+}
+
+int ds_touch_bit(struct ds_device *dev, u8 bit, u8 *tbit)
+{
+ int err, count;
+ struct ds_status st;
+ u16 value = (COMM_BIT_IO | COMM_IM) | ((bit) ? COMM_D : 0);
+ u16 cmd;
+
+ err = ds_send_control(dev, value, 0);
+ if (err)
+ return err;
+
+ count = 0;
+ do {
+ err = ds_wait_status(dev, &st);
+ if (err)
+ return err;
+
+ cmd = st.command0 | (st.command1 << 8);
+ } while (cmd != value && ++count < 10);
+
+ if (err < 0 || count >= 10) {
+ printk(KERN_ERR "Failed to obtain status.\n");
+ return -EINVAL;
+ }
+
+ err = ds_recv_data(dev, tbit, sizeof(*tbit));
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
+int ds_write_bit(struct ds_device *dev, u8 bit)
+{
+ int err;
+ struct ds_status st;
+
+ err = ds_send_control(dev, COMM_BIT_IO | COMM_IM | (bit) ? COMM_D : 0, 0);
+ if (err)
+ return err;
+
+ ds_wait_status(dev, &st);
+
+ return 0;
+}
+
+int ds_write_byte(struct ds_device *dev, u8 byte)
+{
+ int err;
+ struct ds_status st;
+ u8 rbyte;
+
+ err = ds_send_control(dev, COMM_BYTE_IO | COMM_IM | COMM_SPU, byte);
+ if (err)
+ return err;
+
+ err = ds_wait_status(dev, &st);
+ if (err)
+ return err;
+
+ err = ds_recv_data(dev, &rbyte, sizeof(rbyte));
+ if (err < 0)
+ return err;
+
+ ds_start_pulse(dev, PULLUP_PULSE_DURATION);
+
+ return !(byte == rbyte);
+}
+
+int ds_read_bit(struct ds_device *dev, u8 *bit)
+{
+ int err;
+
+ err = ds_send_control_mode(dev, MOD_PULSE_EN, PULSE_SPUE);
+ if (err)
+ return err;
+
+ err = ds_send_control(dev, COMM_BIT_IO | COMM_IM | COMM_SPU | COMM_D, 0);
+ if (err)
+ return err;
+
+ err = ds_recv_data(dev, bit, sizeof(*bit));
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
+int ds_read_byte(struct ds_device *dev, u8 *byte)
+{
+ int err;
+ struct ds_status st;
+
+ err = ds_send_control(dev, COMM_BYTE_IO | COMM_IM , 0xff);
+ if (err)
+ return err;
+
+ ds_wait_status(dev, &st);
+
+ err = ds_recv_data(dev, byte, sizeof(*byte));
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
+int ds_read_block(struct ds_device *dev, u8 *buf, int len)
+{
+ struct ds_status st;
+ int err;
+
+ if (len > 64*1024)
+ return -E2BIG;
+
+ memset(buf, 0xFF, len);
+
+ err = ds_send_data(dev, buf, len);
+ if (err < 0)
+ return err;
+
+ err = ds_send_control(dev, COMM_BLOCK_IO | COMM_IM | COMM_SPU, len);
+ if (err)
+ return err;
+
+ ds_wait_status(dev, &st);
+
+ memset(buf, 0x00, len);
+ err = ds_recv_data(dev, buf, len);
+
+ return err;
+}
+
+int ds_write_block(struct ds_device *dev, u8 *buf, int len)
+{
+ int err;
+ struct ds_status st;
+
+ err = ds_send_data(dev, buf, len);
+ if (err < 0)
+ return err;
+
+ ds_wait_status(dev, &st);
+
+ err = ds_send_control(dev, COMM_BLOCK_IO | COMM_IM | COMM_SPU, len);
+ if (err)
+ return err;
+
+ ds_wait_status(dev, &st);
+
+ err = ds_recv_data(dev, buf, len);
+ if (err < 0)
+ return err;
+
+ ds_start_pulse(dev, PULLUP_PULSE_DURATION);
+
+ return !(err == len);
+}
+
+#if 0
+
+int ds_search(struct ds_device *dev, u64 init, u64 *buf, u8 id_number, int conditional_search)
+{
+ int err;
+ u16 value, index;
+ struct ds_status st;
+
+ memset(buf, 0, sizeof(buf));
+
+ err = ds_send_data(ds_dev, (unsigned char *)&init, 8);
+ if (err)
+ return err;
+
+ ds_wait_status(ds_dev, &st);
+
+ value = COMM_SEARCH_ACCESS | COMM_IM | COMM_SM | COMM_F | COMM_RTS;
+ index = (conditional_search ? 0xEC : 0xF0) | (id_number << 8);
+ err = ds_send_control(ds_dev, value, index);
+ if (err)
+ return err;
+
+ ds_wait_status(ds_dev, &st);
+
+ err = ds_recv_data(ds_dev, (unsigned char *)buf, 8*id_number);
+ if (err < 0)
+ return err;
+
+ return err/8;
+}
+
+int ds_match_access(struct ds_device *dev, u64 init)
+{
+ int err;
+ struct ds_status st;
+
+ err = ds_send_data(dev, (unsigned char *)&init, sizeof(init));
+ if (err)
+ return err;
+
+ ds_wait_status(dev, &st);
+
+ err = ds_send_control(dev, COMM_MATCH_ACCESS | COMM_IM | COMM_RST, 0x0055);
+ if (err)
+ return err;
+
+ ds_wait_status(dev, &st);
+
+ return 0;
+}
+
+int ds_set_path(struct ds_device *dev, u64 init)
+{
+ int err;
+ struct ds_status st;
+ u8 buf[9];
+
+ memcpy(buf, &init, 8);
+ buf[8] = BRANCH_MAIN;
+
+ err = ds_send_data(dev, buf, sizeof(buf));
+ if (err)
+ return err;
+
+ ds_wait_status(dev, &st);
+
+ err = ds_send_control(dev, COMM_SET_PATH | COMM_IM | COMM_RST, 0);
+ if (err)
+ return err;
+
+ ds_wait_status(dev, &st);
+
+ return 0;
+}
+
+#endif /* 0 */
+
+static int ds_probe(struct usb_interface *intf,
+ const struct usb_device_id *udev_id)
+{
+ struct usb_device *udev = interface_to_usbdev(intf);
+ struct usb_endpoint_descriptor *endpoint;
+ struct usb_host_interface *iface_desc;
+ int i, err;
+
+ ds_dev = kmalloc(sizeof(struct ds_device), GFP_KERNEL);
+ if (!ds_dev) {
+ printk(KERN_INFO "Failed to allocate new DS9490R structure.\n");
+ return -ENOMEM;
+ }
+
+ ds_dev->udev = usb_get_dev(udev);
+ usb_set_intfdata(intf, ds_dev);
+
+ err = usb_set_interface(ds_dev->udev, intf->altsetting[0].desc.bInterfaceNumber, 3);
+ if (err) {
+ printk(KERN_ERR "Failed to set alternative setting 3 for %d interface: err=%d.\n",
+ intf->altsetting[0].desc.bInterfaceNumber, err);
+ return err;
+ }
+
+ err = usb_reset_configuration(ds_dev->udev);
+ if (err) {
+ printk(KERN_ERR "Failed to reset configuration: err=%d.\n", err);
+ return err;
+ }
+
+ iface_desc = &intf->altsetting[0];
+ if (iface_desc->desc.bNumEndpoints != NUM_EP-1) {
+ printk(KERN_INFO "Num endpoints=%d. It is not DS9490R.\n", iface_desc->desc.bNumEndpoints);
+ return -ENODEV;
+ }
+
+ atomic_set(&ds_dev->refcnt, 0);
+ memset(ds_dev->ep, 0, sizeof(ds_dev->ep));
+
+ /*
+ * This loop doesn'd show control 0 endpoint,
+ * so we will fill only 1-3 endpoints entry.
+ */
+ for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
+ endpoint = &iface_desc->endpoint[i].desc;
+
+ ds_dev->ep[i+1] = endpoint->bEndpointAddress;
+
+ printk("%d: addr=%x, size=%d, dir=%s, type=%x\n",
+ i, endpoint->bEndpointAddress, le16_to_cpu(endpoint->wMaxPacketSize),
+ (endpoint->bEndpointAddress & USB_DIR_IN)?"IN":"OUT",
+ endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK);
+ }
+
+#if 0
+ {
+ int err, i;
+ u64 buf[3];
+ u64 init=0xb30000002078ee81ull;
+ struct ds_status st;
+
+ ds_reset(ds_dev, &st);
+ err = ds_search(ds_dev, init, buf, 3, 0);
+ if (err < 0)
+ return err;
+ for (i=0; i<err; ++i)
+ printk("%d: %llx\n", i, buf[i]);
+
+ printk("Resetting...\n");
+ ds_reset(ds_dev, &st);
+ printk("Setting path for %llx.\n", init);
+ err = ds_set_path(ds_dev, init);
+ if (err)
+ return err;
+ printk("Calling MATCH_ACCESS.\n");
+ err = ds_match_access(ds_dev, init);
+ if (err)
+ return err;
+
+ printk("Searching the bus...\n");
+ err = ds_search(ds_dev, init, buf, 3, 0);
+
+ printk("ds_search() returned %d\n", err);
+
+ if (err < 0)
+ return err;
+ for (i=0; i<err; ++i)
+ printk("%d: %llx\n", i, buf[i]);
+
+ return 0;
+ }
+#endif
+
+ return 0;
+}
+
+static void ds_disconnect(struct usb_interface *intf)
+{
+ struct ds_device *dev;
+
+ dev = usb_get_intfdata(intf);
+ usb_set_intfdata(intf, NULL);
+
+ while (atomic_read(&dev->refcnt)) {
+ printk(KERN_INFO "Waiting for DS to become free: refcnt=%d.\n",
+ atomic_read(&dev->refcnt));
+
+ if (msleep_interruptible(1000))
+ flush_signals(current);
+ }
+
+ usb_put_dev(dev->udev);
+ kfree(dev);
+ ds_dev = NULL;
+}
+
+static int ds_init(void)
+{
+ int err;
+
+ err = usb_register(&ds_driver);
+ if (err) {
+ printk(KERN_INFO "Failed to register DS9490R USB device: err=%d.\n", err);
+ return err;
+ }
+
+ return 0;
+}
+
+static void ds_fini(void)
+{
+ usb_deregister(&ds_driver);
+}
+
+module_init(ds_init);
+module_exit(ds_fini);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Evgeniy Polyakov <johnpol@2ka.mipt.ru>");
+
+EXPORT_SYMBOL(ds_touch_bit);
+EXPORT_SYMBOL(ds_read_byte);
+EXPORT_SYMBOL(ds_read_bit);
+EXPORT_SYMBOL(ds_read_block);
+EXPORT_SYMBOL(ds_write_byte);
+EXPORT_SYMBOL(ds_write_bit);
+EXPORT_SYMBOL(ds_write_block);
+EXPORT_SYMBOL(ds_reset);
+EXPORT_SYMBOL(ds_get_device);
+EXPORT_SYMBOL(ds_put_device);
+
+/*
+ * This functions can be used for EEPROM programming,
+ * when driver will be included into mainline this will
+ * require uncommenting.
+ */
+#if 0
+EXPORT_SYMBOL(ds_start_pulse);
+EXPORT_SYMBOL(ds_set_speed);
+EXPORT_SYMBOL(ds_detect);
+EXPORT_SYMBOL(ds_stop_pulse);
+EXPORT_SYMBOL(ds_search);
+#endif
diff --git a/drivers/w1/masters/dscore.h b/drivers/w1/masters/dscore.h
new file mode 100644
index 00000000000..6cf5671d6eb
--- /dev/null
+++ b/drivers/w1/masters/dscore.h
@@ -0,0 +1,166 @@
+/*
+ * dscore.h
+ *
+ * Copyright (c) 2004 Evgeniy Polyakov <johnpol@2ka.mipt.ru>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __DSCORE_H
+#define __DSCORE_H
+
+#include <linux/usb.h>
+#include <asm/atomic.h>
+
+/* COMMAND TYPE CODES */
+#define CONTROL_CMD 0x00
+#define COMM_CMD 0x01
+#define MODE_CMD 0x02
+
+/* CONTROL COMMAND CODES */
+#define CTL_RESET_DEVICE 0x0000
+#define CTL_START_EXE 0x0001
+#define CTL_RESUME_EXE 0x0002
+#define CTL_HALT_EXE_IDLE 0x0003
+#define CTL_HALT_EXE_DONE 0x0004
+#define CTL_FLUSH_COMM_CMDS 0x0007
+#define CTL_FLUSH_RCV_BUFFER 0x0008
+#define CTL_FLUSH_XMT_BUFFER 0x0009
+#define CTL_GET_COMM_CMDS 0x000A
+
+/* MODE COMMAND CODES */
+#define MOD_PULSE_EN 0x0000
+#define MOD_SPEED_CHANGE_EN 0x0001
+#define MOD_1WIRE_SPEED 0x0002
+#define MOD_STRONG_PU_DURATION 0x0003
+#define MOD_PULLDOWN_SLEWRATE 0x0004
+#define MOD_PROG_PULSE_DURATION 0x0005
+#define MOD_WRITE1_LOWTIME 0x0006
+#define MOD_DSOW0_TREC 0x0007
+
+/* COMMUNICATION COMMAND CODES */
+#define COMM_ERROR_ESCAPE 0x0601
+#define COMM_SET_DURATION 0x0012
+#define COMM_BIT_IO 0x0020
+#define COMM_PULSE 0x0030
+#define COMM_1_WIRE_RESET 0x0042
+#define COMM_BYTE_IO 0x0052
+#define COMM_MATCH_ACCESS 0x0064
+#define COMM_BLOCK_IO 0x0074
+#define COMM_READ_STRAIGHT 0x0080
+#define COMM_DO_RELEASE 0x6092
+#define COMM_SET_PATH 0x00A2
+#define COMM_WRITE_SRAM_PAGE 0x00B2
+#define COMM_WRITE_EPROM 0x00C4
+#define COMM_READ_CRC_PROT_PAGE 0x00D4
+#define COMM_READ_REDIRECT_PAGE_CRC 0x21E4
+#define COMM_SEARCH_ACCESS 0x00F4
+
+/* Communication command bits */
+#define COMM_TYPE 0x0008
+#define COMM_SE 0x0008
+#define COMM_D 0x0008
+#define COMM_Z 0x0008
+#define COMM_CH 0x0008
+#define COMM_SM 0x0008
+#define COMM_R 0x0008
+#define COMM_IM 0x0001
+
+#define COMM_PS 0x4000
+#define COMM_PST 0x4000
+#define COMM_CIB 0x4000
+#define COMM_RTS 0x4000
+#define COMM_DT 0x2000
+#define COMM_SPU 0x1000
+#define COMM_F 0x0800
+#define COMM_NTP 0x0400
+#define COMM_ICP 0x0200
+#define COMM_RST 0x0100
+
+#define PULSE_PROG 0x01
+#define PULSE_SPUE 0x02
+
+#define BRANCH_MAIN 0xCC
+#define BRANCH_AUX 0x33
+
+/*
+ * Duration of the strong pull-up pulse in milliseconds.
+ */
+#define PULLUP_PULSE_DURATION 750
+
+/* Status flags */
+#define ST_SPUA 0x01 /* Strong Pull-up is active */
+#define ST_PRGA 0x02 /* 12V programming pulse is being generated */
+#define ST_12VP 0x04 /* external 12V programming voltage is present */
+#define ST_PMOD 0x08 /* DS2490 powered from USB and external sources */
+#define ST_HALT 0x10 /* DS2490 is currently halted */
+#define ST_IDLE 0x20 /* DS2490 is currently idle */
+#define ST_EPOF 0x80
+
+#define SPEED_NORMAL 0x00
+#define SPEED_FLEXIBLE 0x01
+#define SPEED_OVERDRIVE 0x02
+
+#define NUM_EP 4
+#define EP_CONTROL 0
+#define EP_STATUS 1
+#define EP_DATA_OUT 2
+#define EP_DATA_IN 3
+
+struct ds_device
+{
+ struct usb_device *udev;
+ struct usb_interface *intf;
+
+ int ep[NUM_EP];
+
+ atomic_t refcnt;
+};
+
+struct ds_status
+{
+ u8 enable;
+ u8 speed;
+ u8 pullup_dur;
+ u8 ppuls_dur;
+ u8 pulldown_slew;
+ u8 write1_time;
+ u8 write0_time;
+ u8 reserved0;
+ u8 status;
+ u8 command0;
+ u8 command1;
+ u8 command_buffer_status;
+ u8 data_out_buffer_status;
+ u8 data_in_buffer_status;
+ u8 reserved1;
+ u8 reserved2;
+
+};
+
+int ds_touch_bit(struct ds_device *, u8, u8 *);
+int ds_read_byte(struct ds_device *, u8 *);
+int ds_read_bit(struct ds_device *, u8 *);
+int ds_write_byte(struct ds_device *, u8);
+int ds_write_bit(struct ds_device *, u8);
+int ds_reset(struct ds_device *, struct ds_status *);
+struct ds_device * ds_get_device(void);
+void ds_put_device(struct ds_device *);
+int ds_write_block(struct ds_device *, u8 *, int);
+int ds_read_block(struct ds_device *, u8 *, int);
+
+#endif /* __DSCORE_H */
+
diff --git a/drivers/w1/masters/matrox_w1.c b/drivers/w1/masters/matrox_w1.c
new file mode 100644
index 00000000000..2788b8ca9bb
--- /dev/null
+++ b/drivers/w1/masters/matrox_w1.c
@@ -0,0 +1,247 @@
+/*
+ * matrox_w1.c
+ *
+ * Copyright (c) 2004 Evgeniy Polyakov <johnpol@2ka.mipt.ru>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <asm/types.h>
+#include <asm/atomic.h>
+#include <asm/io.h>
+
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/timer.h>
+#include <linux/slab.h>
+#include <linux/pci_ids.h>
+#include <linux/pci.h>
+#include <linux/timer.h>
+
+#include "../w1.h"
+#include "../w1_int.h"
+#include "../w1_log.h"
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Evgeniy Polyakov <johnpol@2ka.mipt.ru>");
+MODULE_DESCRIPTION("Driver for transport(Dallas 1-wire prtocol) over VGA DDC(matrox gpio).");
+
+static struct pci_device_id matrox_w1_tbl[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_MATROX, PCI_DEVICE_ID_MATROX_G400) },
+ { },
+};
+MODULE_DEVICE_TABLE(pci, matrox_w1_tbl);
+
+static int __devinit matrox_w1_probe(struct pci_dev *, const struct pci_device_id *);
+static void __devexit matrox_w1_remove(struct pci_dev *);
+
+static struct pci_driver matrox_w1_pci_driver = {
+ .name = "matrox_w1",
+ .id_table = matrox_w1_tbl,
+ .probe = matrox_w1_probe,
+ .remove = __devexit_p(matrox_w1_remove),
+};
+
+/*
+ * Matrox G400 DDC registers.
+ */
+
+#define MATROX_G400_DDC_CLK (1<<4)
+#define MATROX_G400_DDC_DATA (1<<1)
+
+#define MATROX_BASE 0x3C00
+#define MATROX_STATUS 0x1e14
+
+#define MATROX_PORT_INDEX_OFFSET 0x00
+#define MATROX_PORT_DATA_OFFSET 0x0A
+
+#define MATROX_GET_CONTROL 0x2A
+#define MATROX_GET_DATA 0x2B
+#define MATROX_CURSOR_CTL 0x06
+
+struct matrox_device
+{
+ void __iomem *base_addr;
+ void __iomem *port_index;
+ void __iomem *port_data;
+ u8 data_mask;
+
+ unsigned long phys_addr;
+ void __iomem *virt_addr;
+ unsigned long found;
+
+ struct w1_bus_master *bus_master;
+};
+
+static u8 matrox_w1_read_ddc_bit(void *);
+static void matrox_w1_write_ddc_bit(void *, u8);
+
+/*
+ * These functions read and write DDC Data bit.
+ *
+ * Using tristate pins, since i can't find any open-drain pin in whole motherboard.
+ * Unfortunately we can't connect to Intel's 82801xx IO controller
+ * since we don't know motherboard schema, which has pretty unused(may be not) GPIO.
+ *
+ * I've heard that PIIX also has open drain pin.
+ *
+ * Port mapping.
+ */
+static __inline__ u8 matrox_w1_read_reg(struct matrox_device *dev, u8 reg)
+{
+ u8 ret;
+
+ writeb(reg, dev->port_index);
+ ret = readb(dev->port_data);
+ barrier();
+
+ return ret;
+}
+
+static __inline__ void matrox_w1_write_reg(struct matrox_device *dev, u8 reg, u8 val)
+{
+ writeb(reg, dev->port_index);
+ writeb(val, dev->port_data);
+ wmb();
+}
+
+static void matrox_w1_write_ddc_bit(void *data, u8 bit)
+{
+ u8 ret;
+ struct matrox_device *dev = data;
+
+ if (bit)
+ bit = 0;
+ else
+ bit = dev->data_mask;
+
+ ret = matrox_w1_read_reg(dev, MATROX_GET_CONTROL);
+ matrox_w1_write_reg(dev, MATROX_GET_CONTROL, ((ret & ~dev->data_mask) | bit));
+ matrox_w1_write_reg(dev, MATROX_GET_DATA, 0x00);
+}
+
+static u8 matrox_w1_read_ddc_bit(void *data)
+{
+ u8 ret;
+ struct matrox_device *dev = data;
+
+ ret = matrox_w1_read_reg(dev, MATROX_GET_DATA);
+
+ return ret;
+}
+
+static void matrox_w1_hw_init(struct matrox_device *dev)
+{
+ matrox_w1_write_reg(dev, MATROX_GET_DATA, 0xFF);
+ matrox_w1_write_reg(dev, MATROX_GET_CONTROL, 0x00);
+}
+
+static int __devinit matrox_w1_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+ struct matrox_device *dev;
+ int err;
+
+ assert(pdev != NULL);
+ assert(ent != NULL);
+
+ if (pdev->vendor != PCI_VENDOR_ID_MATROX || pdev->device != PCI_DEVICE_ID_MATROX_G400)
+ return -ENODEV;
+
+ dev = kmalloc(sizeof(struct matrox_device) +
+ sizeof(struct w1_bus_master), GFP_KERNEL);
+ if (!dev) {
+ dev_err(&pdev->dev,
+ "%s: Failed to create new matrox_device object.\n",
+ __func__);
+ return -ENOMEM;
+ }
+
+ memset(dev, 0, sizeof(struct matrox_device) + sizeof(struct w1_bus_master));
+
+ dev->bus_master = (struct w1_bus_master *)(dev + 1);
+
+ /*
+ * True for G400, for some other we need resource 0, see drivers/video/matrox/matroxfb_base.c
+ */
+
+ dev->phys_addr = pci_resource_start(pdev, 1);
+
+ dev->virt_addr = ioremap_nocache(dev->phys_addr, 16384);
+ if (!dev->virt_addr) {
+ dev_err(&pdev->dev, "%s: failed to ioremap(0x%lx, %d).\n",
+ __func__, dev->phys_addr, 16384);
+ err = -EIO;
+ goto err_out_free_device;
+ }
+
+ dev->base_addr = dev->virt_addr + MATROX_BASE;
+ dev->port_index = dev->base_addr + MATROX_PORT_INDEX_OFFSET;
+ dev->port_data = dev->base_addr + MATROX_PORT_DATA_OFFSET;
+ dev->data_mask = (MATROX_G400_DDC_DATA);
+
+ matrox_w1_hw_init(dev);
+
+ dev->bus_master->data = dev;
+ dev->bus_master->read_bit = &matrox_w1_read_ddc_bit;
+ dev->bus_master->write_bit = &matrox_w1_write_ddc_bit;
+
+ err = w1_add_master_device(dev->bus_master);
+ if (err)
+ goto err_out_free_device;
+
+ pci_set_drvdata(pdev, dev);
+
+ dev->found = 1;
+
+ dev_info(&pdev->dev, "Matrox G400 GPIO transport layer for 1-wire.\n");
+
+ return 0;
+
+err_out_free_device:
+ kfree(dev);
+
+ return err;
+}
+
+static void __devexit matrox_w1_remove(struct pci_dev *pdev)
+{
+ struct matrox_device *dev = pci_get_drvdata(pdev);
+
+ assert(dev != NULL);
+
+ if (dev->found) {
+ w1_remove_master_device(dev->bus_master);
+ iounmap(dev->virt_addr);
+ }
+ kfree(dev);
+}
+
+static int __init matrox_w1_init(void)
+{
+ return pci_register_driver(&matrox_w1_pci_driver);
+}
+
+static void __exit matrox_w1_fini(void)
+{
+ pci_unregister_driver(&matrox_w1_pci_driver);
+}
+
+module_init(matrox_w1_init);
+module_exit(matrox_w1_fini);
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-01-10 08:41:12 +0000