summaryrefslogtreecommitdiffstats
path: root/drivers/w1
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/w1')
-rw-r--r--drivers/w1/masters/w1-gpio.c2
-rw-r--r--drivers/w1/slaves/Kconfig6
-rw-r--r--drivers/w1/slaves/Makefile1
-rw-r--r--drivers/w1/slaves/w1_ds2433.c7
-rw-r--r--drivers/w1/slaves/w1_therm.c2
5 files changed, 15 insertions, 3 deletions
diff --git a/drivers/w1/masters/w1-gpio.c b/drivers/w1/masters/w1-gpio.c
index 9e1138a75e8..a411702413d 100644
--- a/drivers/w1/masters/w1-gpio.c
+++ b/drivers/w1/masters/w1-gpio.c
@@ -39,7 +39,7 @@ static u8 w1_gpio_read_bit(void *data)
{
struct w1_gpio_platform_data *pdata = data;
- return gpio_get_value(pdata->pin);
+ return gpio_get_value(pdata->pin) ? 1 : 0;
}
static int __init w1_gpio_probe(struct platform_device *pdev)
diff --git a/drivers/w1/slaves/Kconfig b/drivers/w1/slaves/Kconfig
index 8d0b1fb1e52..1f51366417b 100644
--- a/drivers/w1/slaves/Kconfig
+++ b/drivers/w1/slaves/Kconfig
@@ -16,6 +16,12 @@ config W1_SLAVE_SMEM
Say Y here if you want to connect 1-wire
simple 64bit memory rom(ds2401/ds2411/ds1990*) to your wire.
+config W1_SLAVE_DS2431
+ tristate "1kb EEPROM family support (DS2431)"
+ help
+ Say Y here if you want to use a 1-wire
+ 1kb EEPROM family device (DS2431)
+
config W1_SLAVE_DS2433
tristate "4kb EEPROM family support (DS2433)"
help
diff --git a/drivers/w1/slaves/Makefile b/drivers/w1/slaves/Makefile
index 990f400b6d2..f1f51f19b12 100644
--- a/drivers/w1/slaves/Makefile
+++ b/drivers/w1/slaves/Makefile
@@ -4,6 +4,7 @@
obj-$(CONFIG_W1_SLAVE_THERM) += w1_therm.o
obj-$(CONFIG_W1_SLAVE_SMEM) += w1_smem.o
+obj-$(CONFIG_W1_SLAVE_DS2431) += w1_ds2431.o
obj-$(CONFIG_W1_SLAVE_DS2433) += w1_ds2433.o
obj-$(CONFIG_W1_SLAVE_DS2760) += w1_ds2760.o
obj-$(CONFIG_W1_SLAVE_BQ27000) += w1_bq27000.o
diff --git a/drivers/w1/slaves/w1_ds2433.c b/drivers/w1/slaves/w1_ds2433.c
index 858c16a544c..13944714882 100644
--- a/drivers/w1/slaves/w1_ds2433.c
+++ b/drivers/w1/slaves/w1_ds2433.c
@@ -156,6 +156,9 @@ out_up:
*/
static int w1_f23_write(struct w1_slave *sl, int addr, int len, const u8 *data)
{
+#ifdef CONFIG_W1_SLAVE_DS2433_CRC
+ struct w1_f23_data *f23 = sl->family_data;
+#endif
u8 wrbuf[4];
u8 rdbuf[W1_PAGE_SIZE + 3];
u8 es = (addr + len - 1) & 0x1f;
@@ -196,7 +199,9 @@ static int w1_f23_write(struct w1_slave *sl, int addr, int len, const u8 *data)
/* Reset the bus to wake up the EEPROM (this may not be needed) */
w1_reset_bus(sl->master);
-
+#ifdef CONFIG_W1_SLAVE_DS2433_CRC
+ f23->validcrc &= ~(1 << (addr >> W1_PAGE_BITS));
+#endif
return 0;
}
diff --git a/drivers/w1/slaves/w1_therm.c b/drivers/w1/slaves/w1_therm.c
index 2c8dff9f77d..1ed3d554e37 100644
--- a/drivers/w1/slaves/w1_therm.c
+++ b/drivers/w1/slaves/w1_therm.c
@@ -115,7 +115,7 @@ static struct w1_therm_family_converter w1_therm_families[] = {
static inline int w1_DS18B20_convert_temp(u8 rom[9])
{
- s16 t = (rom[1] << 8) | rom[0];
+ int t = ((s16)rom[1] << 8) | rom[0];
t = t*1000/16;
return t;
}