summaryrefslogtreecommitdiffstats
path: root/drivers/w1
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/w1')
-rw-r--r--drivers/w1/masters/Kconfig3
-rw-r--r--drivers/w1/masters/ds2490.c155
-rw-r--r--drivers/w1/masters/mxc_w1.c43
-rw-r--r--drivers/w1/masters/w1-gpio.c19
-rw-r--r--drivers/w1/slaves/Kconfig5
-rw-r--r--drivers/w1/slaves/w1_therm.c21
-rw-r--r--drivers/w1/w1.c269
-rw-r--r--drivers/w1/w1.h186
-rw-r--r--drivers/w1/w1_family.c8
-rw-r--r--drivers/w1/w1_family.h13
-rw-r--r--drivers/w1/w1_int.c25
-rw-r--r--drivers/w1/w1_io.c102
-rw-r--r--drivers/w1/w1_netlink.c359
-rw-r--r--drivers/w1/w1_netlink.h33
14 files changed, 910 insertions, 331 deletions
diff --git a/drivers/w1/masters/Kconfig b/drivers/w1/masters/Kconfig
index efc7f075fcb..1708b2300c7 100644
--- a/drivers/w1/masters/Kconfig
+++ b/drivers/w1/masters/Kconfig
@@ -36,13 +36,12 @@ config W1_MASTER_DS2482
config W1_MASTER_MXC
tristate "Freescale MXC 1-wire busmaster"
- depends on W1 && ARCH_MXC
+ depends on ARCH_MXC || COMPILE_TEST
help
Say Y here to enable MXC 1-wire host
config W1_MASTER_DS1WM
tristate "Maxim DS1WM 1-wire busmaster"
- depends on W1
help
Say Y here to enable the DS1WM 1-wire driver, such as that
in HP iPAQ devices like h5xxx, h2200, and ASIC3-based like
diff --git a/drivers/w1/masters/ds2490.c b/drivers/w1/masters/ds2490.c
index 4f7e1d770f8..7404ad3062b 100644
--- a/drivers/w1/masters/ds2490.c
+++ b/drivers/w1/masters/ds2490.c
@@ -1,5 +1,5 @@
/*
- * dscore.c
+ * ds2490.c USB to one wire bridge
*
* Copyright (c) 2004 Evgeniy Polyakov <zbr@ioremap.net>
*
@@ -28,6 +28,10 @@
#include "../w1_int.h"
#include "../w1.h"
+/* USB Standard */
+/* USB Control request vendor type */
+#define VENDOR 0x40
+
/* COMMAND TYPE CODES */
#define CONTROL_CMD 0x00
#define COMM_CMD 0x01
@@ -107,6 +111,8 @@
#define ST_HALT 0x10 /* DS2490 is currently halted */
#define ST_IDLE 0x20 /* DS2490 is currently idle */
#define ST_EPOF 0x80
+/* Status transfer size, 16 bytes status, 16 byte result flags */
+#define ST_SIZE 0x20
/* Result Register flags */
#define RR_DETECT 0xA5 /* New device detected */
@@ -198,7 +204,7 @@ static int ds_send_control_cmd(struct ds_device *dev, u16 value, u16 index)
int err;
err = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, dev->ep[EP_CONTROL]),
- CONTROL_CMD, 0x40, value, index, NULL, 0, 1000);
+ CONTROL_CMD, VENDOR, value, index, NULL, 0, 1000);
if (err < 0) {
printk(KERN_ERR "Failed to send command control message %x.%x: err=%d.\n",
value, index, err);
@@ -213,7 +219,7 @@ static int ds_send_control_mode(struct ds_device *dev, u16 value, u16 index)
int err;
err = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, dev->ep[EP_CONTROL]),
- MODE_CMD, 0x40, value, index, NULL, 0, 1000);
+ MODE_CMD, VENDOR, value, index, NULL, 0, 1000);
if (err < 0) {
printk(KERN_ERR "Failed to send mode control message %x.%x: err=%d.\n",
value, index, err);
@@ -228,7 +234,7 @@ static int ds_send_control(struct ds_device *dev, u16 value, u16 index)
int err;
err = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, dev->ep[EP_CONTROL]),
- COMM_CMD, 0x40, value, index, NULL, 0, 1000);
+ COMM_CMD, VENDOR, value, index, NULL, 0, 1000);
if (err < 0) {
printk(KERN_ERR "Failed to send control message %x.%x: err=%d.\n",
value, index, err);
@@ -246,7 +252,8 @@ static int ds_recv_status_nodump(struct ds_device *dev, struct ds_status *st,
memset(st, 0, sizeof(*st));
count = 0;
- err = usb_bulk_msg(dev->udev, usb_rcvbulkpipe(dev->udev, dev->ep[EP_STATUS]), buf, size, &count, 100);
+ err = usb_interrupt_msg(dev->udev, usb_rcvintpipe(dev->udev,
+ dev->ep[EP_STATUS]), buf, size, &count, 100);
if (err < 0) {
printk(KERN_ERR "Failed to read 1-wire data from 0x%x: err=%d.\n", dev->ep[EP_STATUS], err);
return err;
@@ -353,7 +360,7 @@ static int ds_recv_data(struct ds_device *dev, unsigned char *buf, int size)
err = usb_bulk_msg(dev->udev, usb_rcvbulkpipe(dev->udev, dev->ep[EP_DATA_IN]),
buf, size, &count, 1000);
if (err < 0) {
- u8 buf[0x20];
+ u8 buf[ST_SIZE];
int count;
printk(KERN_INFO "Clearing ep0x%x.\n", dev->ep[EP_DATA_IN]);
@@ -398,7 +405,7 @@ int ds_stop_pulse(struct ds_device *dev, int limit)
{
struct ds_status st;
int count = 0, err = 0;
- u8 buf[0x20];
+ u8 buf[ST_SIZE];
do {
err = ds_send_control(dev, CTL_HALT_EXE_IDLE, 0);
@@ -450,10 +457,11 @@ int ds_detect(struct ds_device *dev, struct ds_status *st)
static int ds_wait_status(struct ds_device *dev, struct ds_status *st)
{
- u8 buf[0x20];
+ u8 buf[ST_SIZE];
int err, count = 0;
do {
+ st->status = 0;
err = ds_recv_status_nodump(dev, st, buf, sizeof(buf));
#if 0
if (err >= 0) {
@@ -464,7 +472,7 @@ static int ds_wait_status(struct ds_device *dev, struct ds_status *st)
printk("\n");
}
#endif
- } while (!(buf[0x08] & ST_IDLE) && !(err < 0) && ++count < 100);
+ } while (!(st->status & ST_IDLE) && !(err < 0) && ++count < 100);
if (err >= 16 && st->status & ST_EPOF) {
printk(KERN_INFO "Resetting device after ST_EPOF.\n");
@@ -690,37 +698,106 @@ static int ds_write_block(struct ds_device *dev, u8 *buf, int len)
return !(err == len);
}
-#if 0
-
-static int ds_search(struct ds_device *dev, u64 init, u64 *buf, u8 id_number, int conditional_search)
+static void ds9490r_search(void *data, struct w1_master *master,
+ u8 search_type, w1_slave_found_callback callback)
{
+ /* When starting with an existing id, the first id returned will
+ * be that device (if it is still on the bus most likely).
+ *
+ * If the number of devices found is less than or equal to the
+ * search_limit, that number of IDs will be returned. If there are
+ * more, search_limit IDs will be returned followed by a non-zero
+ * discrepency value.
+ */
+ struct ds_device *dev = data;
int err;
u16 value, index;
struct ds_status st;
+ u8 st_buf[ST_SIZE];
+ int search_limit;
+ int found = 0;
+ int i;
- memset(buf, 0, sizeof(buf));
+ /* DS18b20 spec, 13.16 ms per device, 75 per second, sleep for
+ * discovering 8 devices (1 bulk transfer and 1/2 FIFO size) at a time.
+ */
+ const unsigned long jtime = msecs_to_jiffies(1000*8/75);
+ /* FIFO 128 bytes, bulk packet size 64, read a multiple of the
+ * packet size.
+ */
+ u64 buf[2*64/8];
- err = ds_send_data(ds_dev, (unsigned char *)&init, 8);
- if (err)
- return err;
+ mutex_lock(&master->bus_mutex);
- ds_wait_status(ds_dev, &st);
+ /* address to start searching at */
+ if (ds_send_data(dev, (u8 *)&master->search_id, 8) < 0)
+ goto search_out;
+ master->search_id = 0;
- value = COMM_SEARCH_ACCESS | COMM_IM | COMM_SM | COMM_F | COMM_RTS;
- index = (conditional_search ? 0xEC : 0xF0) | (id_number << 8);
- err = ds_send_control(ds_dev, value, index);
- if (err)
- return err;
+ value = COMM_SEARCH_ACCESS | COMM_IM | COMM_RST | COMM_SM | COMM_F |
+ COMM_RTS;
+ search_limit = master->max_slave_count;
+ if (search_limit > 255)
+ search_limit = 0;
+ index = search_type | (search_limit << 8);
+ if (ds_send_control(dev, value, index) < 0)
+ goto search_out;
- ds_wait_status(ds_dev, &st);
+ do {
+ schedule_timeout(jtime);
- err = ds_recv_data(ds_dev, (unsigned char *)buf, 8*id_number);
- if (err < 0)
- return err;
+ if (ds_recv_status_nodump(dev, &st, st_buf, sizeof(st_buf)) <
+ sizeof(st)) {
+ break;
+ }
- return err/8;
+ if (st.data_in_buffer_status) {
+ /* Bulk in can receive partial ids, but when it does
+ * they fail crc and will be discarded anyway.
+ * That has only been seen when status in buffer
+ * is 0 and bulk is read anyway, so don't read
+ * bulk without first checking if status says there
+ * is data to read.
+ */
+ err = ds_recv_data(dev, (u8 *)buf, sizeof(buf));
+ if (err < 0)
+ break;
+ for (i = 0; i < err/8; ++i) {
+ ++found;
+ if (found <= search_limit)
+ callback(master, buf[i]);
+ /* can't know if there will be a discrepancy
+ * value after until the next id */
+ if (found == search_limit)
+ master->search_id = buf[i];
+ }
+ }
+
+ if (test_bit(W1_ABORT_SEARCH, &master->flags))
+ break;
+ } while (!(st.status & (ST_IDLE | ST_HALT)));
+
+ /* only continue the search if some weren't found */
+ if (found <= search_limit) {
+ master->search_id = 0;
+ } else if (!test_bit(W1_WARN_MAX_COUNT, &master->flags)) {
+ /* Only max_slave_count will be scanned in a search,
+ * but it will start where it left off next search
+ * until all ids are identified and then it will start
+ * over. A continued search will report the previous
+ * last id as the first id (provided it is still on the
+ * bus).
+ */
+ dev_info(&dev->udev->dev, "%s: max_slave_count %d reached, "
+ "will continue next search.\n", __func__,
+ master->max_slave_count);
+ set_bit(W1_WARN_MAX_COUNT, &master->flags);
+ }
+search_out:
+ mutex_unlock(&master->bus_mutex);
}
+#if 0
static int ds_match_access(struct ds_device *dev, u64 init)
{
int err;
@@ -894,6 +971,7 @@ static int ds_w1_init(struct ds_device *dev)
dev->master.write_block = &ds9490r_write_block;
dev->master.reset_bus = &ds9490r_reset;
dev->master.set_pullup = &ds9490r_set_pullup;
+ dev->master.search = &ds9490r_search;
return w1_add_master_device(&dev->master);
}
@@ -910,15 +988,13 @@ static int ds_probe(struct usb_interface *intf,
struct usb_endpoint_descriptor *endpoint;
struct usb_host_interface *iface_desc;
struct ds_device *dev;
- int i, err;
+ int i, err, alt;
- dev = kmalloc(sizeof(struct ds_device), GFP_KERNEL);
+ dev = kzalloc(sizeof(struct ds_device), GFP_KERNEL);
if (!dev) {
printk(KERN_INFO "Failed to allocate new DS9490R structure.\n");
return -ENOMEM;
}
- dev->spu_sleep = 0;
- dev->spu_bit = 0;
dev->udev = usb_get_dev(udev);
if (!dev->udev) {
err = -ENOMEM;
@@ -928,20 +1004,25 @@ static int ds_probe(struct usb_interface *intf,
usb_set_intfdata(intf, dev);
- err = usb_set_interface(dev->udev, intf->altsetting[0].desc.bInterfaceNumber, 3);
+ err = usb_reset_configuration(dev->udev);
if (err) {
- printk(KERN_ERR "Failed to set alternative setting 3 for %d interface: err=%d.\n",
- intf->altsetting[0].desc.bInterfaceNumber, err);
+ dev_err(&dev->udev->dev,
+ "Failed to reset configuration: err=%d.\n", err);
goto err_out_clear;
}
- err = usb_reset_configuration(dev->udev);
+ /* alternative 3, 1ms interrupt (greatly speeds search), 64 byte bulk */
+ alt = 3;
+ err = usb_set_interface(dev->udev,
+ intf->altsetting[alt].desc.bInterfaceNumber, alt);
if (err) {
- printk(KERN_ERR "Failed to reset configuration: err=%d.\n", err);
+ dev_err(&dev->udev->dev, "Failed to set alternative setting %d "
+ "for %d interface: err=%d.\n", alt,
+ intf->altsetting[alt].desc.bInterfaceNumber, err);
goto err_out_clear;
}
- iface_desc = &intf->altsetting[0];
+ iface_desc = &intf->altsetting[alt];
if (iface_desc->desc.bNumEndpoints != NUM_EP-1) {
printk(KERN_INFO "Num endpoints=%d. It is not DS9490R.\n", iface_desc->desc.bNumEndpoints);
err = -EINVAL;
diff --git a/drivers/w1/masters/mxc_w1.c b/drivers/w1/masters/mxc_w1.c
index 1e5d94c5afc..67b067a3e2a 100644
--- a/drivers/w1/masters/mxc_w1.c
+++ b/drivers/w1/masters/mxc_w1.c
@@ -10,24 +10,16 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
- *
*/
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
#include <linux/clk.h>
-#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
#include "../w1.h"
#include "../w1_int.h"
-#include "../w1_log.h"
/* According to the mx27 Datasheet the reset procedure should take up to about
* 1350us. We set the timeout to 500*100us = 50ms for sure */
@@ -36,13 +28,13 @@
/*
* MXC W1 Register offsets
*/
-#define MXC_W1_CONTROL 0x00
-#define MXC_W1_TIME_DIVIDER 0x02
-#define MXC_W1_RESET 0x04
-#define MXC_W1_COMMAND 0x06
-#define MXC_W1_TXRX 0x08
-#define MXC_W1_INTERRUPT 0x0A
-#define MXC_W1_INTERRUPT_EN 0x0C
+#define MXC_W1_CONTROL 0x00
+# define MXC_W1_CONTROL_RDST BIT(3)
+# define MXC_W1_CONTROL_WR(x) BIT(5 - (x))
+# define MXC_W1_CONTROL_PST BIT(6)
+# define MXC_W1_CONTROL_RPP BIT(7)
+#define MXC_W1_TIME_DIVIDER 0x02
+#define MXC_W1_RESET 0x04
struct mxc_w1_device {
void __iomem *regs;
@@ -61,12 +53,12 @@ static u8 mxc_w1_ds2_reset_bus(void *data)
unsigned int timeout_cnt = 0;
struct mxc_w1_device *dev = data;
- __raw_writeb(0x80, (dev->regs + MXC_W1_CONTROL));
+ writeb(MXC_W1_CONTROL_RPP, (dev->regs + MXC_W1_CONTROL));
while (1) {
- reg_val = __raw_readb(dev->regs + MXC_W1_CONTROL);
+ reg_val = readb(dev->regs + MXC_W1_CONTROL);
- if (((reg_val >> 7) & 0x1) == 0 ||
+ if (!(reg_val & MXC_W1_CONTROL_RPP) ||
timeout_cnt > MXC_W1_RESET_TIMEOUT)
break;
else
@@ -74,7 +66,7 @@ static u8 mxc_w1_ds2_reset_bus(void *data)
udelay(100);
}
- return (reg_val >> 7) & 0x1;
+ return !!(reg_val & MXC_W1_CONTROL_PST);
}
/*
@@ -90,16 +82,16 @@ static u8 mxc_w1_ds2_touch_bit(void *data, u8 bit)
* datasheet.
*/
- __raw_writeb((1 << (5 - bit)), ctrl_addr);
+ writeb(MXC_W1_CONTROL_WR(bit), ctrl_addr);
while (timeout_cnt--) {
- if (!((__raw_readb(ctrl_addr) >> (5 - bit)) & 0x1))
+ if (!(readb(ctrl_addr) & MXC_W1_CONTROL_WR(bit)))
break;
udelay(1);
}
- return ((__raw_readb(ctrl_addr)) >> 3) & 0x1;
+ return !!(readb(ctrl_addr) & MXC_W1_CONTROL_RDST);
}
static int mxc_w1_probe(struct platform_device *pdev)
@@ -139,7 +131,7 @@ static int mxc_w1_probe(struct platform_device *pdev)
if (err)
return err;
- __raw_writeb(clkdiv - 1, mdev->regs + MXC_W1_TIME_DIVIDER);
+ writeb(clkdiv - 1, mdev->regs + MXC_W1_TIME_DIVIDER);
mdev->bus_master.data = mdev;
mdev->bus_master.reset_bus = mxc_w1_ds2_reset_bus;
@@ -177,6 +169,7 @@ MODULE_DEVICE_TABLE(of, mxc_w1_dt_ids);
static struct platform_driver mxc_w1_driver = {
.driver = {
.name = "mxc_w1",
+ .owner = THIS_MODULE,
.of_match_table = mxc_w1_dt_ids,
},
.probe = mxc_w1_probe,
diff --git a/drivers/w1/masters/w1-gpio.c b/drivers/w1/masters/w1-gpio.c
index 9709b8b484b..1d111e56c8c 100644
--- a/drivers/w1/masters/w1-gpio.c
+++ b/drivers/w1/masters/w1-gpio.c
@@ -89,11 +89,22 @@ static int w1_gpio_probe_dt(struct platform_device *pdev)
pdata->is_open_drain = 1;
gpio = of_get_gpio(np, 0);
- if (gpio < 0)
+ if (gpio < 0) {
+ if (gpio != -EPROBE_DEFER)
+ dev_err(&pdev->dev,
+ "Failed to parse gpio property for data pin (%d)\n",
+ gpio);
+
return gpio;
+ }
pdata->pin = gpio;
- pdata->ext_pullup_enable_pin = of_get_gpio(np, 1);
+ gpio = of_get_gpio(np, 1);
+ if (gpio == -EPROBE_DEFER)
+ return gpio;
+ /* ignore other errors as the pullup gpio is optional */
+ pdata->ext_pullup_enable_pin = gpio;
+
pdev->dev.platform_data = pdata;
return 0;
@@ -107,10 +118,8 @@ static int w1_gpio_probe(struct platform_device *pdev)
if (of_have_populated_dt()) {
err = w1_gpio_probe_dt(pdev);
- if (err < 0) {
- dev_err(&pdev->dev, "Failed to parse DT\n");
+ if (err < 0)
return err;
- }
}
pdata = dev_get_platdata(&pdev->dev);
diff --git a/drivers/w1/slaves/Kconfig b/drivers/w1/slaves/Kconfig
index 5e6a3c9e510..1cdce80b6ab 100644
--- a/drivers/w1/slaves/Kconfig
+++ b/drivers/w1/slaves/Kconfig
@@ -72,7 +72,6 @@ config W1_SLAVE_DS2433_CRC
config W1_SLAVE_DS2760
tristate "Dallas 2760 battery monitor chip (HP iPAQ & others)"
- depends on W1
help
If you enable this you will have the DS2760 battery monitor
chip support.
@@ -85,7 +84,6 @@ config W1_SLAVE_DS2760
config W1_SLAVE_DS2780
tristate "Dallas 2780 battery monitor chip"
- depends on W1
help
If you enable this you will have the DS2780 battery monitor
chip support.
@@ -98,7 +96,6 @@ config W1_SLAVE_DS2780
config W1_SLAVE_DS2781
tristate "Dallas 2781 battery monitor chip"
- depends on W1
help
If you enable this you will have the DS2781 battery monitor
chip support.
@@ -111,7 +108,6 @@ config W1_SLAVE_DS2781
config W1_SLAVE_DS28E04
tristate "4096-Bit Addressable 1-Wire EEPROM with PIO (DS28E04-100)"
- depends on W1
select CRC16
help
If you enable this you will have the DS28E04-100
@@ -124,7 +120,6 @@ config W1_SLAVE_DS28E04
config W1_SLAVE_BQ27000
tristate "BQ27000 slave support"
- depends on W1
help
Say Y here if you want to use a hdq
bq27000 slave support.
diff --git a/drivers/w1/slaves/w1_therm.c b/drivers/w1/slaves/w1_therm.c
index 8b5ff33f72c..1f11a20a8ab 100644
--- a/drivers/w1/slaves/w1_therm.c
+++ b/drivers/w1/slaves/w1_therm.c
@@ -27,6 +27,7 @@
#include <linux/sched.h>
#include <linux/device.h>
#include <linux/types.h>
+#include <linux/slab.h>
#include <linux/delay.h>
#include "../w1.h"
@@ -58,6 +59,19 @@ MODULE_ALIAS("w1-family-" __stringify(W1_THERM_DS28EA00));
static int w1_strong_pullup = 1;
module_param_named(strong_pullup, w1_strong_pullup, int, 0);
+static int w1_therm_add_slave(struct w1_slave *sl)
+{
+ sl->family_data = kzalloc(9, GFP_KERNEL);
+ if (!sl->family_data)
+ return -ENOMEM;
+ return 0;
+}
+
+static void w1_therm_remove_slave(struct w1_slave *sl)
+{
+ kfree(sl->family_data);
+ sl->family_data = NULL;
+}
static ssize_t w1_slave_show(struct device *device,
struct device_attribute *attr, char *buf);
@@ -71,6 +85,8 @@ static struct attribute *w1_therm_attrs[] = {
ATTRIBUTE_GROUPS(w1_therm);
static struct w1_family_ops w1_therm_fops = {
+ .add_slave = w1_therm_add_slave,
+ .remove_slave = w1_therm_remove_slave,
.groups = w1_therm_groups,
};
@@ -253,12 +269,13 @@ static ssize_t w1_slave_show(struct device *device,
c -= snprintf(buf + PAGE_SIZE - c, c, ": crc=%02x %s\n",
crc, (verdict) ? "YES" : "NO");
if (verdict)
- memcpy(sl->rom, rom, sizeof(sl->rom));
+ memcpy(sl->family_data, rom, sizeof(rom));
else
dev_warn(device, "Read failed CRC check\n");
for (i = 0; i < 9; ++i)
- c -= snprintf(buf + PAGE_SIZE - c, c, "%02x ", sl->rom[i]);
+ c -= snprintf(buf + PAGE_SIZE - c, c, "%02x ",
+ ((u8 *)sl->family_data)[i]);
c -= snprintf(buf + PAGE_SIZE - c, c, "t=%d\n",
w1_convert_temp(rom, sl->family->fid));
diff --git a/drivers/w1/w1.c b/drivers/w1/w1.c
index 66efa96c460..b96f61b15dc 100644
--- a/drivers/w1/w1.c
+++ b/drivers/w1/w1.c
@@ -46,18 +46,29 @@ MODULE_AUTHOR("Evgeniy Polyakov <zbr@ioremap.net>");
MODULE_DESCRIPTION("Driver for 1-wire Dallas network protocol.");
static int w1_timeout = 10;
-int w1_max_slave_count = 10;
+int w1_max_slave_count = 64;
int w1_max_slave_ttl = 10;
module_param_named(timeout, w1_timeout, int, 0);
+MODULE_PARM_DESC(timeout, "time in seconds between automatic slave searches");
+/* A search stops when w1_max_slave_count devices have been found in that
+ * search. The next search will start over and detect the same set of devices
+ * on a static 1-wire bus. Memory is not allocated based on this number, just
+ * on the number of devices known to the kernel. Having a high number does not
+ * consume additional resources. As a special case, if there is only one
+ * device on the network and w1_max_slave_count is set to 1, the device id can
+ * be read directly skipping the normal slower search process.
+ */
module_param_named(max_slave_count, w1_max_slave_count, int, 0);
+MODULE_PARM_DESC(max_slave_count,
+ "maximum number of slaves detected in a search");
module_param_named(slave_ttl, w1_max_slave_ttl, int, 0);
+MODULE_PARM_DESC(slave_ttl,
+ "Number of searches not seeing a slave before it will be removed");
DEFINE_MUTEX(w1_mlock);
LIST_HEAD(w1_masters);
-static int w1_attach_slave_device(struct w1_master *dev, struct w1_reg_num *rn);
-
static int w1_master_match(struct device *dev, struct device_driver *drv)
{
return 1;
@@ -81,19 +92,10 @@ static void w1_slave_release(struct device *dev)
{
struct w1_slave *sl = dev_to_w1_slave(dev);
- dev_dbg(dev, "%s: Releasing %s.\n", __func__, sl->name);
-
- while (atomic_read(&sl->refcnt)) {
- dev_dbg(dev, "Waiting for %s to become free: refcnt=%d.\n",
- sl->name, atomic_read(&sl->refcnt));
- if (msleep_interruptible(1000))
- flush_signals(current);
- }
+ dev_dbg(dev, "%s: Releasing %s [%p]\n", __func__, sl->name, sl);
w1_family_put(sl->family);
sl->master->slave_count--;
-
- complete(&sl->released);
}
static ssize_t name_show(struct device *dev, struct device_attribute *attr, char *buf)
@@ -243,7 +245,9 @@ static ssize_t w1_master_attribute_store_search(struct device * dev,
mutex_lock(&md->mutex);
md->search_count = tmp;
mutex_unlock(&md->mutex);
- wake_up_process(md->thread);
+ /* Only wake if it is going to be searching. */
+ if (tmp)
+ wake_up_process(md->thread);
return count;
}
@@ -277,7 +281,6 @@ static ssize_t w1_master_attribute_store_pullup(struct device *dev,
mutex_lock(&md->mutex);
md->enable_pullup = tmp;
mutex_unlock(&md->mutex);
- wake_up_process(md->thread);
return count;
}
@@ -314,6 +317,24 @@ static ssize_t w1_master_attribute_show_timeout(struct device *dev, struct devic
return count;
}
+static ssize_t w1_master_attribute_store_max_slave_count(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ int tmp;
+ struct w1_master *md = dev_to_w1_master(dev);
+
+ if (kstrtoint(buf, 0, &tmp) == -EINVAL || tmp < 1)
+ return -EINVAL;
+
+ mutex_lock(&md->mutex);
+ md->max_slave_count = tmp;
+ /* allow each time the max_slave_count is updated */
+ clear_bit(W1_WARN_MAX_COUNT, &md->flags);
+ mutex_unlock(&md->mutex);
+
+ return count;
+}
+
static ssize_t w1_master_attribute_show_max_slave_count(struct device *dev, struct device_attribute *attr, char *buf)
{
struct w1_master *md = dev_to_w1_master(dev);
@@ -352,23 +373,20 @@ static ssize_t w1_master_attribute_show_slaves(struct device *dev,
{
struct w1_master *md = dev_to_w1_master(dev);
int c = PAGE_SIZE;
+ struct list_head *ent, *n;
+ struct w1_slave *sl = NULL;
- mutex_lock(&md->mutex);
-
- if (md->slave_count == 0)
- c -= snprintf(buf + PAGE_SIZE - c, c, "not found.\n");
- else {
- struct list_head *ent, *n;
- struct w1_slave *sl;
+ mutex_lock(&md->list_mutex);
- list_for_each_safe(ent, n, &md->slist) {
- sl = list_entry(ent, struct w1_slave, w1_slave_entry);
+ list_for_each_safe(ent, n, &md->slist) {
+ sl = list_entry(ent, struct w1_slave, w1_slave_entry);
- c -= snprintf(buf + PAGE_SIZE - c, c, "%s\n", sl->name);
- }
+ c -= snprintf(buf + PAGE_SIZE - c, c, "%s\n", sl->name);
}
+ if (!sl)
+ c -= snprintf(buf + PAGE_SIZE - c, c, "not found.\n");
- mutex_unlock(&md->mutex);
+ mutex_unlock(&md->list_mutex);
return PAGE_SIZE - c;
}
@@ -422,19 +440,22 @@ static int w1_atoreg_num(struct device *dev, const char *buf, size_t count,
}
/* Searches the slaves in the w1_master and returns a pointer or NULL.
- * Note: must hold the mutex
+ * Note: must not hold list_mutex
*/
-static struct w1_slave *w1_slave_search_device(struct w1_master *dev,
+struct w1_slave *w1_slave_search_device(struct w1_master *dev,
struct w1_reg_num *rn)
{
struct w1_slave *sl;
+ mutex_lock(&dev->list_mutex);
list_for_each_entry(sl, &dev->slist, w1_slave_entry) {
if (sl->reg_num.family == rn->family &&
sl->reg_num.id == rn->id &&
sl->reg_num.crc == rn->crc) {
+ mutex_unlock(&dev->list_mutex);
return sl;
}
}
+ mutex_unlock(&dev->list_mutex);
return NULL;
}
@@ -491,7 +512,10 @@ static ssize_t w1_master_attribute_store_remove(struct device *dev,
mutex_lock(&md->mutex);
sl = w1_slave_search_device(md, &rn);
if (sl) {
- w1_slave_detach(sl);
+ result = w1_slave_detach(sl);
+ /* refcnt 0 means it was detached in the call */
+ if (result == 0)
+ result = count;
} else {
dev_info(dev, "Device %02x-%012llx doesn't exists\n", rn.family,
(unsigned long long)rn.id);
@@ -516,7 +540,7 @@ static ssize_t w1_master_attribute_store_remove(struct device *dev,
static W1_MASTER_ATTR_RO(name, S_IRUGO);
static W1_MASTER_ATTR_RO(slaves, S_IRUGO);
static W1_MASTER_ATTR_RO(slave_count, S_IRUGO);
-static W1_MASTER_ATTR_RO(max_slave_count, S_IRUGO);
+static W1_MASTER_ATTR_RW(max_slave_count, S_IRUGO | S_IWUSR | S_IWGRP);
static W1_MASTER_ATTR_RO(attempts, S_IRUGO);
static W1_MASTER_ATTR_RO(timeout, S_IRUGO);
static W1_MASTER_ATTR_RO(pointer, S_IRUGO);
@@ -686,12 +710,14 @@ static int __w1_attach_slave_device(struct w1_slave *sl)
dev_set_uevent_suppress(&sl->dev, false);
kobject_uevent(&sl->dev.kobj, KOBJ_ADD);
+ mutex_lock(&sl->master->list_mutex);
list_add_tail(&sl->w1_slave_entry, &sl->master->slist);
+ mutex_unlock(&sl->master->list_mutex);
return 0;
}
-static int w1_attach_slave_device(struct w1_master *dev, struct w1_reg_num *rn)
+int w1_attach_slave_device(struct w1_master *dev, struct w1_reg_num *rn)
{
struct w1_slave *sl;
struct w1_family *f;
@@ -713,8 +739,8 @@ static int w1_attach_slave_device(struct w1_master *dev, struct w1_reg_num *rn)
memset(&msg, 0, sizeof(msg));
memcpy(&sl->reg_num, rn, sizeof(sl->reg_num));
- atomic_set(&sl->refcnt, 0);
- init_completion(&sl->released);
+ atomic_set(&sl->refcnt, 1);
+ atomic_inc(&sl->master->refcnt);
/* slave modules need to be loaded in a context with unlocked mutex */
mutex_unlock(&dev->mutex);
@@ -754,23 +780,48 @@ static int w1_attach_slave_device(struct w1_master *dev, struct w1_reg_num *rn)
return 0;
}
-void w1_slave_detach(struct w1_slave *sl)
+int w1_unref_slave(struct w1_slave *sl)
{
- struct w1_netlink_msg msg;
-
- dev_dbg(&sl->dev, "%s: detaching %s [%p].\n", __func__, sl->name, sl);
-
- list_del(&sl->w1_slave_entry);
-
- memset(&msg, 0, sizeof(msg));
- memcpy(msg.id.id, &sl->reg_num, sizeof(msg.id));
- msg.type = W1_SLAVE_REMOVE;
- w1_netlink_send(sl->master, &msg);
-
- device_unregister(&sl->dev);
+ struct w1_master *dev = sl->master;
+ int refcnt;
+ mutex_lock(&dev->list_mutex);
+ refcnt = atomic_sub_return(1, &sl->refcnt);
+ if (refcnt == 0) {
+ struct w1_netlink_msg msg;
+
+ dev_dbg(&sl->dev, "%s: detaching %s [%p].\n", __func__,
+ sl->name, sl);
+
+ list_del(&sl->w1_slave_entry);
+
+ memset(&msg, 0, sizeof(msg));
+ memcpy(msg.id.id, &sl->reg_num, sizeof(msg.id));
+ msg.type = W1_SLAVE_REMOVE;
+ w1_netlink_send(sl->master, &msg);
+
+ device_unregister(&sl->dev);
+ #ifdef DEBUG
+ memset(sl, 0, sizeof(*sl));
+ #endif
+ kfree(sl);
+ }
+ atomic_dec(&dev->refcnt);
+ mutex_unlock(&dev->list_mutex);
+ return refcnt;
+}
- wait_for_completion(&sl->released);
- kfree(sl);
+int w1_slave_detach(struct w1_slave *sl)
+{
+ /* Only detach a slave once as it decreases the refcnt each time. */
+ int destroy_now;
+ mutex_lock(&sl->master->list_mutex);
+ destroy_now = !test_bit(W1_SLAVE_DETACH, &sl->flags);
+ set_bit(W1_SLAVE_DETACH, &sl->flags);
+ mutex_unlock(&sl->master->list_mutex);
+
+ if (destroy_now)
+ destroy_now = !w1_unref_slave(sl);
+ return destroy_now ? 0 : -EBUSY;
}
struct w1_master *w1_search_master_id(u32 id)
@@ -799,7 +850,7 @@ struct w1_slave *w1_search_slave(struct w1_reg_num *id)
mutex_lock(&w1_mlock);
list_for_each_entry(dev, &w1_masters, w1_master_entry) {
- mutex_lock(&dev->mutex);
+ mutex_lock(&dev->list_mutex);
list_for_each_entry(sl, &dev->slist, w1_slave_entry) {
if (sl->reg_num.family == id->family &&
sl->reg_num.id == id->id &&
@@ -810,7 +861,7 @@ struct w1_slave *w1_search_slave(struct w1_reg_num *id)
break;
}
}
- mutex_unlock(&dev->mutex);
+ mutex_unlock(&dev->list_mutex);
if (found)
break;
@@ -830,6 +881,7 @@ void w1_reconnect_slaves(struct w1_family *f, int attach)
dev_dbg(&dev->dev, "Reconnecting slaves in device %s "
"for family %02x.\n", dev->name, f->fid);
mutex_lock(&dev->mutex);
+ mutex_lock(&dev->list_mutex);
list_for_each_entry_safe(sl, sln, &dev->slist, w1_slave_entry) {
/* If it is a new family, slaves with the default
* family driver and are that family will be
@@ -841,14 +893,19 @@ void w1_reconnect_slaves(struct w1_family *f, int attach)
(!attach && sl->family->fid == f->fid)) {
struct w1_reg_num rn;
+ mutex_unlock(&dev->list_mutex);
memcpy(&rn, &sl->reg_num, sizeof(rn));
- w1_slave_detach(sl);
-
- w1_attach_slave_device(dev, &rn);
+ /* If it was already in use let the automatic
+ * scan pick it up again later.
+ */
+ if (!w1_slave_detach(sl))
+ w1_attach_slave_device(dev, &rn);
+ mutex_lock(&dev->list_mutex);
}
}
dev_dbg(&dev->dev, "Reconnecting slaves in device %s "
"has been finished.\n", dev->name);
+ mutex_unlock(&dev->list_mutex);
mutex_unlock(&dev->mutex);
}
mutex_unlock(&w1_mlock);
@@ -876,7 +933,12 @@ void w1_slave_found(struct w1_master *dev, u64 rn)
}
/**
- * Performs a ROM Search & registers any devices found.
+ * w1_search() - Performs a ROM Search & registers any devices found.
+ * @dev: The master device to search
+ * @search_type: W1_SEARCH to search all devices, or W1_ALARM_SEARCH
+ * to return only devices in the alarmed state
+ * @cb: Function to call when a device is found
+ *
* The 1-wire search is a simple binary tree search.
* For each bit of the address, we read two bits and write one bit.
* The bit written will put to sleep all devies that don't match that bit.
@@ -886,8 +948,6 @@ void w1_slave_found(struct w1_master *dev, u64 rn)
*
* See "Application note 187 1-wire search algorithm" at www.maxim-ic.com
*
- * @dev The master device to search
- * @cb Function to call when a device is found
*/
void w1_search(struct w1_master *dev, u8 search_type, w1_slave_found_callback cb)
{
@@ -898,7 +958,8 @@ void w1_search(struct w1_master *dev, u8 search_type, w1_slave_found_callback cb
u8 triplet_ret = 0;
search_bit = 0;
- rn = last_rn = 0;
+ rn = dev->search_id;
+ last_rn = 0;
last_device = 0;
last_zero = -1;
@@ -945,7 +1006,7 @@ void w1_search(struct w1_master *dev, u8 search_type, w1_slave_found_callback cb
else
search_bit = ((last_rn >> i) & 0x1);
- /** Read two bits and write one bit */
+ /* Read two bits and write one bit */
triplet_ret = w1_triplet(dev, search_bit);
/* quit if no device responded */
@@ -960,8 +1021,7 @@ void w1_search(struct w1_master *dev, u8 search_type, w1_slave_found_callback cb
tmp64 = (triplet_ret >> 2);
rn |= (tmp64 << i);
- /* ensure we're called from kthread and not by netlink callback */
- if (!dev->priv && kthread_should_stop()) {
+ if (test_bit(W1_ABORT_SEARCH, &dev->flags)) {
mutex_unlock(&dev->bus_mutex);
dev_dbg(&dev->dev, "Abort w1_search\n");
return;
@@ -970,11 +1030,30 @@ void w1_search(struct w1_master *dev, u8 search_type, w1_slave_found_callback cb
mutex_unlock(&dev->bus_mutex);
if ( (triplet_ret & 0x03) != 0x03 ) {
- if ( (desc_bit == last_zero) || (last_zero < 0))
+ if ((desc_bit == last_zero) || (last_zero < 0)) {
last_device = 1;
+ dev->search_id = 0;
+ } else {
+ dev->search_id = rn;
+ }
desc_bit = last_zero;
cb(dev, rn);
}
+
+ if (!last_device && slave_count == dev->max_slave_count &&
+ !test_bit(W1_WARN_MAX_COUNT, &dev->flags)) {
+ /* Only max_slave_count will be scanned in a search,
+ * but it will start where it left off next search
+ * until all ids are identified and then it will start
+ * over. A continued search will report the previous
+ * last id as the first id (provided it is still on the
+ * bus).
+ */
+ dev_info(&dev->dev, "%s: max_slave_count %d reached, "
+ "will continue next search.\n", __func__,
+ dev->max_slave_count);
+ set_bit(W1_WARN_MAX_COUNT, &dev->flags);
+ }
}
}
@@ -983,17 +1062,24 @@ void w1_search_process_cb(struct w1_master *dev, u8 search_type,
{
struct w1_slave *sl, *sln;
+ mutex_lock(&dev->list_mutex);
list_for_each_entry(sl, &dev->slist, w1_slave_entry)
clear_bit(W1_SLAVE_ACTIVE, &sl->flags);
+ mutex_unlock(&dev->list_mutex);
w1_search_devices(dev, search_type, cb);
+ mutex_lock(&dev->list_mutex);
list_for_each_entry_safe(sl, sln, &dev->slist, w1_slave_entry) {
- if (!test_bit(W1_SLAVE_ACTIVE, &sl->flags) && !--sl->ttl)
+ if (!test_bit(W1_SLAVE_ACTIVE, &sl->flags) && !--sl->ttl) {
+ mutex_unlock(&dev->list_mutex);
w1_slave_detach(sl);
+ mutex_lock(&dev->list_mutex);
+ }
else if (test_bit(W1_SLAVE_ACTIVE, &sl->flags))
sl->ttl = dev->slave_ttl;
}
+ mutex_unlock(&dev->list_mutex);
if (dev->search_count > 0)
dev->search_count--;
@@ -1004,6 +1090,32 @@ static void w1_search_process(struct w1_master *dev, u8 search_type)
w1_search_process_cb(dev, search_type, w1_slave_found);
}
+/**
+ * w1_process_callbacks() - execute each dev->async_list callback entry
+ * @dev: w1_master device
+ *
+ * Return: 1 if there were commands to executed 0 otherwise
+ */
+int w1_process_callbacks(struct w1_master *dev)
+{
+ int ret = 0;
+ struct w1_async_cmd *async_cmd, *async_n;
+
+ /* The list can be added to in another thread, loop until it is empty */
+ while (!list_empty(&dev->async_list)) {
+ list_for_each_entry_safe(async_cmd, async_n, &dev->async_list,
+ async_entry) {
+ /* drop the lock, if it is a search it can take a long
+ * time */
+ mutex_unlock(&dev->list_mutex);
+ async_cmd->cb(dev, async_cmd);
+ ret = 1;
+ mutex_lock(&dev->list_mutex);
+ }
+ }
+ return ret;
+}
+
int w1_process(void *data)
{
struct w1_master *dev = (struct w1_master *) data;
@@ -1011,23 +1123,46 @@ int w1_process(void *data)
* time can be calculated in jiffies once.
*/
const unsigned long jtime = msecs_to_jiffies(w1_timeout * 1000);
+ /* remainder if it woke up early */
+ unsigned long jremain = 0;
- while (!kthread_should_stop()) {
- if (dev->search_count) {
+ for (;;) {
+
+ if (!jremain && dev->search_count) {
mutex_lock(&dev->mutex);
w1_search_process(dev, W1_SEARCH);
mutex_unlock(&dev->mutex);
}
+ mutex_lock(&dev->list_mutex);
+ /* Note, w1_process_callback drops the lock while processing,
+ * but locks it again before returning.
+ */
+ if (!w1_process_callbacks(dev) && jremain) {
+ /* a wake up is either to stop the thread, process
+ * callbacks, or search, it isn't process callbacks, so
+ * schedule a search.
+ */
+ jremain = 1;
+ }
+
try_to_freeze();
__set_current_state(TASK_INTERRUPTIBLE);
+ /* hold list_mutex until after interruptible to prevent loosing
+ * the wakeup signal when async_cmd is added.
+ */
+ mutex_unlock(&dev->list_mutex);
+
if (kthread_should_stop())
break;
/* Only sleep when the search is active. */
- if (dev->search_count)
- schedule_timeout(jtime);
+ if (dev->search_count) {
+ if (!jremain)
+ jremain = jtime;
+ jremain = schedule_timeout(jremain);
+ }
else
schedule();
}
diff --git a/drivers/w1/w1.h b/drivers/w1/w1.h
index ca8081a101d..734dab7fc68 100644
--- a/drivers/w1/w1.h
+++ b/drivers/w1/w1.h
@@ -22,6 +22,13 @@
#ifndef __W1_H
#define __W1_H
+/**
+ * struct w1_reg_num - broken out slave device id
+ *
+ * @family: identifies the type of device
+ * @id: along with family is the unique device id
+ * @crc: checksum of the other bytes
+ */
struct w1_reg_num
{
#if defined(__LITTLE_ENDIAN_BITFIELD)
@@ -58,7 +65,24 @@ struct w1_reg_num
#define W1_RESUME_CMD 0xA5
#define W1_SLAVE_ACTIVE 0
+#define W1_SLAVE_DETACH 1
+/**
+ * struct w1_slave - holds a single slave device on the bus
+ *
+ * @owner: Points to the one wire "wire" kernel module.
+ * @name: Device id is ascii.
+ * @w1_slave_entry: data for the linked list
+ * @reg_num: the slave id in binary
+ * @refcnt: reference count, delete when 0
+ * @flags: bit flags for W1_SLAVE_ACTIVE W1_SLAVE_DETACH
+ * @ttl: decrement per search this slave isn't found, deatch at 0
+ * @master: bus which this slave is on
+ * @family: module for device family type
+ * @family_data: pointer for use by the family module
+ * @dev: kernel device identifier
+ *
+ */
struct w1_slave
{
struct module *owner;
@@ -66,7 +90,6 @@ struct w1_slave
struct list_head w1_slave_entry;
struct w1_reg_num reg_num;
atomic_t refcnt;
- u8 rom[9];
int ttl;
unsigned long flags;
@@ -74,99 +97,146 @@ struct w1_slave
struct w1_family *family;
void *family_data;
struct device dev;
- struct completion released;
};
typedef void (*w1_slave_found_callback)(struct w1_master *, u64);
/**
+ * struct w1_bus_master - operations available on a bus master
+ *
+ * @data: the first parameter in all the functions below
+ *
+ * @read_bit: Sample the line level @return the level read (0 or 1)
+ *
+ * @write_bit: Sets the line level
+ *
+ * @touch_bit: the lowest-level function for devices that really support the
+ * 1-wire protocol.
+ * touch_bit(0) = write-0 cycle
+ * touch_bit(1) = write-1 / read cycle
+ * @return the bit read (0 or 1)
+ *
+ * @read_byte: Reads a bytes. Same as 8 touch_bit(1) calls.
+ * @return the byte read
+ *
+ * @write_byte: Writes a byte. Same as 8 touch_bit(x) calls.
+ *
+ * @read_block: Same as a series of read_byte() calls
+ * @return the number of bytes read
+ *
+ * @write_block: Same as a series of write_byte() calls
+ *
+ * @triplet: Combines two reads and a smart write for ROM searches
+ * @return bit0=Id bit1=comp_id bit2=dir_taken
+ *
+ * @reset_bus: long write-0 with a read for the presence pulse detection
+ * @return -1=Error, 0=Device present, 1=No device present
+ *
+ * @set_pullup: Put out a strong pull-up pulse of the specified duration.
+ * @return -1=Error, 0=completed
+ *
+ * @search: Really nice hardware can handles the different types of ROM search
+ * w1_master* is passed to the slave found callback.
+ * u8 is search_type, W1_SEARCH or W1_ALARM_SEARCH
+ *
* Note: read_bit and write_bit are very low level functions and should only
* be used with hardware that doesn't really support 1-wire operations,
* like a parallel/serial port.
* Either define read_bit and write_bit OR define, at minimum, touch_bit and
* reset_bus.
+ *
*/
struct w1_bus_master
{
- /** the first parameter in all the functions below */
void *data;
- /**
- * Sample the line level
- * @return the level read (0 or 1)
- */
u8 (*read_bit)(void *);
- /** Sets the line level */
void (*write_bit)(void *, u8);
- /**
- * touch_bit is the lowest-level function for devices that really
- * support the 1-wire protocol.
- * touch_bit(0) = write-0 cycle
- * touch_bit(1) = write-1 / read cycle
- * @return the bit read (0 or 1)
- */
u8 (*touch_bit)(void *, u8);
- /**
- * Reads a bytes. Same as 8 touch_bit(1) calls.
- * @return the byte read
- */
u8 (*read_byte)(void *);
- /**
- * Writes a byte. Same as 8 touch_bit(x) calls.
- */
void (*write_byte)(void *, u8);
- /**
- * Same as a series of read_byte() calls
- * @return the number of bytes read
- */
u8 (*read_block)(void *, u8 *, int);
- /** Same as a series of write_byte() calls */
void (*write_block)(void *, const u8 *, int);
- /**
- * Combines two reads and a smart write for ROM searches
- * @return bit0=Id bit1=comp_id bit2=dir_taken
- */
u8 (*triplet)(void *, u8);
- /**
- * long write-0 with a read for the presence pulse detection
- * @return -1=Error, 0=Device present, 1=No device present
- */
u8 (*reset_bus)(void *);
- /**
- * Put out a strong pull-up pulse of the specified duration.
- * @return -1=Error, 0=completed
- */
u8 (*set_pullup)(void *, int);
- /** Really nice hardware can handles the different types of ROM search
- * w1_master* is passed to the slave found callback.
- */
void (*search)(void *, struct w1_master *,
u8, w1_slave_found_callback);
};
+/**
+ * enum w1_master_flags - bitfields used in w1_master.flags
+ * @W1_ABORT_SEARCH: abort searching early on shutdown
+ * @W1_WARN_MAX_COUNT: limit warning when the maximum count is reached
+ */
+enum w1_master_flags {
+ W1_ABORT_SEARCH = 0,
+ W1_WARN_MAX_COUNT = 1,
+};
+
+/**
+ * struct w1_master - one per bus master
+ * @w1_master_entry: master linked list
+ * @owner: module owner
+ * @name: dynamically allocate bus name
+ * @list_mutex: protect slist and async_list
+ * @slist: linked list of slaves
+ * @async_list: linked list of netlink commands to execute
+ * @max_slave_count: maximum number of slaves to search for at a time
+ * @slave_count: current number of slaves known
+ * @attempts: number of searches ran
+ * @slave_ttl: number of searches before a slave is timed out
+ * @initialized: prevent init/removal race conditions
+ * @id: w1 bus number
+ * @search_count: number of automatic searches to run, -1 unlimited
+ * @search_id: allows continuing a search
+ * @refcnt: reference count
+ * @priv: private data storage
+ * @priv_size: size allocated
+ * @enable_pullup: allows a strong pullup
+ * @pullup_duration: time for the next strong pullup
+ * @flags: one of w1_master_flags
+ * @thread: thread for bus search and netlink commands
+ * @mutex: protect most of w1_master
+ * @bus_mutex: pretect concurrent bus access
+ * @driver: sysfs driver
+ * @dev: sysfs device
+ * @bus_master: io operations available
+ * @seq: sequence number used for netlink broadcasts
+ * @portid: destination for the current netlink command
+ */
struct w1_master
{
struct list_head w1_master_entry;
struct module *owner;
unsigned char name[W1_MAXNAMELEN];
+ /* list_mutex protects just slist and async_list so slaves can be
+ * searched for and async commands added while the master has
+ * w1_master.mutex locked and is operating on the bus.
+ * lock order w1_mlock, w1_master.mutex, w1_master.list_mutex
+ */
+ struct mutex list_mutex;
struct list_head slist;
+ struct list_head async_list;
int max_slave_count, slave_count;
unsigned long attempts;
int slave_ttl;
int initialized;
u32 id;
int search_count;
+ /* id to start searching on, to continue a search or 0 to restart */
+ u64 search_id;
atomic_t refcnt;
@@ -178,6 +248,8 @@ struct w1_master
/** 5V strong pullup duration in milliseconds, zero disabled. */
int pullup_duration;
+ long flags;
+
struct task_struct *thread;
struct mutex mutex;
struct mutex bus_mutex;
@@ -188,16 +260,41 @@ struct w1_master
struct w1_bus_master *bus_master;
u32 seq;
+ /* port id to send netlink responses to. The value is temporarily
+ * stored here while processing a message, set after locking the
+ * mutex, zero before unlocking the mutex.
+ */
+ u32 portid;
+};
+
+/**
+ * struct w1_async_cmd - execute callback from the w1_process kthread
+ * @async_entry: link entry
+ * @cb: callback function, must list_del and destroy this list before
+ * returning
+ *
+ * When inserted into the w1_master async_list, w1_process will execute
+ * the callback. Embed this into the structure with the command details.
+ */
+struct w1_async_cmd {
+ struct list_head async_entry;
+ void (*cb)(struct w1_master *dev, struct w1_async_cmd *async_cmd);
};
int w1_create_master_attributes(struct w1_master *);
void w1_destroy_master_attributes(struct w1_master *master);
void w1_search(struct w1_master *dev, u8 search_type, w1_slave_found_callback cb);
void w1_search_devices(struct w1_master *dev, u8 search_type, w1_slave_found_callback cb);
+/* call w1_unref_slave to release the reference counts w1_search_slave added */
struct w1_slave *w1_search_slave(struct w1_reg_num *id);
+/* decrements the reference on sl->master and sl, and cleans up if zero
+ * returns the reference count after it has been decremented */
+int w1_unref_slave(struct w1_slave *sl);
void w1_slave_found(struct w1_master *dev, u64 rn);
void w1_search_process_cb(struct w1_master *dev, u8 search_type,
w1_slave_found_callback cb);
+struct w1_slave *w1_slave_search_device(struct w1_master *dev,
+ struct w1_reg_num *rn);
struct w1_master *w1_search_master_id(u32 id);
/* Disconnect and reconnect devices in the given family. Used for finding
@@ -206,7 +303,9 @@ struct w1_master *w1_search_master_id(u32 id);
* has just been registered, to 0 when it has been unregistered.
*/
void w1_reconnect_slaves(struct w1_family *f, int attach);
-void w1_slave_detach(struct w1_slave *sl);
+int w1_attach_slave_device(struct w1_master *dev, struct w1_reg_num *rn);
+/* 0 success, otherwise EBUSY */
+int w1_slave_detach(struct w1_slave *sl);
u8 w1_triplet(struct w1_master *dev, int bdir);
void w1_write_8(struct w1_master *, u8);
@@ -242,6 +341,7 @@ extern int w1_max_slave_ttl;
extern struct list_head w1_masters;
extern struct mutex w1_mlock;
+extern int w1_process_callbacks(struct w1_master *dev);
extern int w1_process(void *);
#endif /* __KERNEL__ */
diff --git a/drivers/w1/w1_family.c b/drivers/w1/w1_family.c
index e9309778ee7..3bff6b37b47 100644
--- a/drivers/w1/w1_family.c
+++ b/drivers/w1/w1_family.c
@@ -31,6 +31,10 @@
DEFINE_SPINLOCK(w1_flock);
static LIST_HEAD(w1_families);
+/**
+ * w1_register_family() - register a device family driver
+ * @newf: family to register
+ */
int w1_register_family(struct w1_family *newf)
{
struct list_head *ent, *n;
@@ -59,6 +63,10 @@ int w1_register_family(struct w1_family *newf)
return ret;
}
+/**
+ * w1_unregister_family() - unregister a device family driver
+ * @fent: family to unregister
+ */
void w1_unregister_family(struct w1_family *fent)
{
struct list_head *ent, *n;
diff --git a/drivers/w1/w1_family.h b/drivers/w1/w1_family.h
index 4ad0e81b640..26ca1343055 100644
--- a/drivers/w1/w1_family.h
+++ b/drivers/w1/w1_family.h
@@ -48,6 +48,12 @@
struct w1_slave;
+/**
+ * struct w1_family_ops - operations for a family type
+ * @add_slave: add_slave
+ * @remove_slave: remove_slave
+ * @groups: sysfs group
+ */
struct w1_family_ops
{
int (* add_slave)(struct w1_slave *);
@@ -55,6 +61,13 @@ struct w1_family_ops
const struct attribute_group **groups;
};
+/**
+ * struct w1_family - reference counted family structure.
+ * @family_entry: family linked list
+ * @fid: 8 bit family identifier
+ * @fops: operations for this family
+ * @refcnt: reference counter
+ */
struct w1_family
{
struct list_head family_entry;
diff --git a/drivers/w1/w1_int.c b/drivers/w1/w1_int.c
index 590bd8a7cd1..9b084db739c 100644
--- a/drivers/w1/w1_int.c
+++ b/drivers/w1/w1_int.c
@@ -75,8 +75,10 @@ static struct w1_master * w1_alloc_dev(u32 id, int slave_count, int slave_ttl,
atomic_set(&dev->refcnt, 2);
INIT_LIST_HEAD(&dev->slist);
+ INIT_LIST_HEAD(&dev->async_list);
mutex_init(&dev->mutex);
mutex_init(&dev->bus_mutex);
+ mutex_init(&dev->list_mutex);
memcpy(&dev->dev, device, sizeof(struct device));
dev_set_name(&dev->dev, "w1_bus_master%u", dev->id);
@@ -103,6 +105,10 @@ static void w1_free_dev(struct w1_master *dev)
device_unregister(&dev->dev);
}
+/**
+ * w1_add_master_device() - registers a new master device
+ * @master: master bus device to register
+ */
int w1_add_master_device(struct w1_bus_master *master)
{
struct w1_master *dev, *entry;
@@ -172,6 +178,7 @@ int w1_add_master_device(struct w1_bus_master *master)
#if 0 /* Thread cleanup code, not required currently. */
err_out_kill_thread:
+ set_bit(W1_ABORT_SEARCH, &dev->flags);
kthread_stop(dev->thread);
#endif
err_out_rm_attr:
@@ -187,16 +194,22 @@ void __w1_remove_master_device(struct w1_master *dev)
struct w1_netlink_msg msg;
struct w1_slave *sl, *sln;
- kthread_stop(dev->thread);
-
mutex_lock(&w1_mlock);
list_del(&dev->w1_master_entry);
mutex_unlock(&w1_mlock);
+ set_bit(W1_ABORT_SEARCH, &dev->flags);
+ kthread_stop(dev->thread);
+
mutex_lock(&dev->mutex);
- list_for_each_entry_safe(sl, sln, &dev->slist, w1_slave_entry)
+ mutex_lock(&dev->list_mutex);
+ list_for_each_entry_safe(sl, sln, &dev->slist, w1_slave_entry) {
+ mutex_unlock(&dev->list_mutex);
w1_slave_detach(sl);
+ mutex_lock(&dev->list_mutex);
+ }
w1_destroy_master_attributes(dev);
+ mutex_unlock(&dev->list_mutex);
mutex_unlock(&dev->mutex);
atomic_dec(&dev->refcnt);
@@ -206,7 +219,9 @@ void __w1_remove_master_device(struct w1_master *dev)
if (msleep_interruptible(1000))
flush_signals(current);
+ w1_process_callbacks(dev);
}
+ w1_process_callbacks(dev);
memset(&msg, 0, sizeof(msg));
msg.id.mst.id = dev->id;
@@ -216,6 +231,10 @@ void __w1_remove_master_device(struct w1_master *dev)
w1_free_dev(dev);
}
+/**
+ * w1_remove_master_device() - unregister a master device
+ * @bm: master bus device to remove
+ */
void w1_remove_master_device(struct w1_bus_master *bm)
{
struct w1_master *dev, *found = NULL;
diff --git a/drivers/w1/w1_io.c b/drivers/w1/w1_io.c
index e10acc23773..282092421cc 100644
--- a/drivers/w1/w1_io.c
+++ b/drivers/w1/w1_io.c
@@ -62,7 +62,9 @@ static void w1_write_bit(struct w1_master *dev, int bit);
static u8 w1_read_bit(struct w1_master *dev);
/**
- * Generates a write-0 or write-1 cycle and samples the level.
+ * w1_touch_bit() - Generates a write-0 or write-1 cycle and samples the level.
+ * @dev: the master device
+ * @bit: 0 - write a 0, 1 - write a 0 read the level
*/
static u8 w1_touch_bit(struct w1_master *dev, int bit)
{
@@ -77,7 +79,10 @@ static u8 w1_touch_bit(struct w1_master *dev, int bit)
}
/**
- * Generates a write-0 or write-1 cycle.
+ * w1_write_bit() - Generates a write-0 or write-1 cycle.
+ * @dev: the master device
+ * @bit: bit to write
+ *
* Only call if dev->bus_master->touch_bit is NULL
*/
static void w1_write_bit(struct w1_master *dev, int bit)
@@ -102,11 +107,12 @@ static void w1_write_bit(struct w1_master *dev, int bit)
}
/**
+ * w1_pre_write() - pre-write operations
+ * @dev: the master device
+ *
* Pre-write operation, currently only supporting strong pullups.
* Program the hardware for a strong pullup, if one has been requested and
* the hardware supports it.
- *
- * @param dev the master device
*/
static void w1_pre_write(struct w1_master *dev)
{
@@ -118,11 +124,12 @@ static void w1_pre_write(struct w1_master *dev)
}
/**
+ * w1_post_write() - post-write options
+ * @dev: the master device
+ *
* Post-write operation, currently only supporting strong pullups.
* If a strong pullup was requested, clear it if the hardware supports
* them, or execute the delay otherwise, in either case clear the request.
- *
- * @param dev the master device
*/
static void w1_post_write(struct w1_master *dev)
{
@@ -136,10 +143,9 @@ static void w1_post_write(struct w1_master *dev)
}
/**
- * Writes 8 bits.
- *
- * @param dev the master device
- * @param byte the byte to write
+ * w1_write_8() - Writes 8 bits.
+ * @dev: the master device
+ * @byte: the byte to write
*/
void w1_write_8(struct w1_master *dev, u8 byte)
{
@@ -161,7 +167,9 @@ EXPORT_SYMBOL_GPL(w1_write_8);
/**
- * Generates a write-1 cycle and samples the level.
+ * w1_read_bit() - Generates a write-1 cycle and samples the level.
+ * @dev: the master device
+ *
* Only call if dev->bus_master->touch_bit is NULL
*/
static u8 w1_read_bit(struct w1_master *dev)
@@ -185,16 +193,17 @@ static u8 w1_read_bit(struct w1_master *dev)
}
/**
- * Does a triplet - used for searching ROM addresses.
+ * w1_triplet() - * Does a triplet - used for searching ROM addresses.
+ * @dev: the master device
+ * @bdir: the bit to write if both id_bit and comp_bit are 0
+ *
* Return bits:
* bit 0 = id_bit
* bit 1 = comp_bit
* bit 2 = dir_taken
* If both bits 0 & 1 are set, the search should be restarted.
*
- * @param dev the master device
- * @param bdir the bit to write if both id_bit and comp_bit are 0
- * @return bit fields - see above
+ * Return: bit fields - see above
*/
u8 w1_triplet(struct w1_master *dev, int bdir)
{
@@ -226,10 +235,10 @@ u8 w1_triplet(struct w1_master *dev, int bdir)
}
/**
- * Reads 8 bits.
+ * w1_read_8() - Reads 8 bits.
+ * @dev: the master device
*
- * @param dev the master device
- * @return the byte read
+ * Return: the byte read
*/
u8 w1_read_8(struct w1_master *dev)
{
@@ -247,11 +256,10 @@ u8 w1_read_8(struct w1_master *dev)
EXPORT_SYMBOL_GPL(w1_read_8);
/**
- * Writes a series of bytes.
- *
- * @param dev the master device
- * @param buf pointer to the data to write
- * @param len the number of bytes to write
+ * w1_write_block() - Writes a series of bytes.
+ * @dev: the master device
+ * @buf: pointer to the data to write
+ * @len: the number of bytes to write
*/
void w1_write_block(struct w1_master *dev, const u8 *buf, int len)
{
@@ -269,11 +277,10 @@ void w1_write_block(struct w1_master *dev, const u8 *buf, int len)
EXPORT_SYMBOL_GPL(w1_write_block);
/**
- * Touches a series of bytes.
- *
- * @param dev the master device
- * @param buf pointer to the data to write
- * @param len the number of bytes to write
+ * w1_touch_block() - Touches a series of bytes.
+ * @dev: the master device
+ * @buf: pointer to the data to write
+ * @len: the number of bytes to write
*/
void w1_touch_block(struct w1_master *dev, u8 *buf, int len)
{
@@ -294,12 +301,11 @@ void w1_touch_block(struct w1_master *dev, u8 *buf, int len)
EXPORT_SYMBOL_GPL(w1_touch_block);
/**
- * Reads a series of bytes.
- *
- * @param dev the master device
- * @param buf pointer to the buffer to fill
- * @param len the number of bytes to read
- * @return the number of bytes read
+ * w1_read_block() - Reads a series of bytes.
+ * @dev: the master device
+ * @buf: pointer to the buffer to fill
+ * @len: the number of bytes to read
+ * Return: the number of bytes read
*/
u8 w1_read_block(struct w1_master *dev, u8 *buf, int len)
{
@@ -319,10 +325,9 @@ u8 w1_read_block(struct w1_master *dev, u8 *buf, int len)
EXPORT_SYMBOL_GPL(w1_read_block);
/**
- * Issues a reset bus sequence.
- *
- * @param dev The bus master pointer
- * @return 0=Device present, 1=No device present or error
+ * w1_reset_bus() - Issues a reset bus sequence.
+ * @dev: the master device
+ * Return: 0=Device present, 1=No device present or error
*/
int w1_reset_bus(struct w1_master *dev)
{
@@ -383,12 +388,15 @@ void w1_search_devices(struct w1_master *dev, u8 search_type, w1_slave_found_cal
}
/**
+ * w1_reset_select_slave() - reset and select a slave
+ * @sl: the slave to select
+ *
* Resets the bus and then selects the slave by sending either a skip rom
- * or a rom match.
+ * or a rom match. A skip rom is issued if there is only one device
+ * registered on the bus.
* The w1 master lock must be held.
*
- * @param sl the slave to select
- * @return 0=success, anything else=error
+ * Return: 0=success, anything else=error
*/
int w1_reset_select_slave(struct w1_slave *sl)
{
@@ -409,6 +417,9 @@ int w1_reset_select_slave(struct w1_slave *sl)
EXPORT_SYMBOL_GPL(w1_reset_select_slave);
/**
+ * w1_reset_resume_command() - resume instead of another match ROM
+ * @dev: the master device
+ *
* When the workflow with a slave amongst many requires several
* successive commands a reset between each, this function is similar
* to doing a reset then a match ROM for the last matched ROM. The
@@ -420,8 +431,6 @@ EXPORT_SYMBOL_GPL(w1_reset_select_slave);
* doesn't work of course, but the resume command is the next best thing.
*
* The w1 master lock must be held.
- *
- * @param dev the master device
*/
int w1_reset_resume_command(struct w1_master *dev)
{
@@ -435,6 +444,10 @@ int w1_reset_resume_command(struct w1_master *dev)
EXPORT_SYMBOL_GPL(w1_reset_resume_command);
/**
+ * w1_next_pullup() - register for a strong pullup
+ * @dev: the master device
+ * @delay: time in milliseconds
+ *
* Put out a strong pull-up of the specified duration after the next write
* operation. Not all hardware supports strong pullups. Hardware that
* doesn't support strong pullups will sleep for the given time after the
@@ -442,8 +455,7 @@ EXPORT_SYMBOL_GPL(w1_reset_resume_command);
* the next write, specifying zero will clear a previous request.
* The w1 master lock must be held.
*
- * @param delay time in milliseconds
- * @return 0=success, anything else=error
+ * Return: 0=success, anything else=error
*/
void w1_next_pullup(struct w1_master *dev, int delay)
{
diff --git a/drivers/w1/w1_netlink.c b/drivers/w1/w1_netlink.c
index 40788c925d1..5234964fe00 100644
--- a/drivers/w1/w1_netlink.c
+++ b/drivers/w1/w1_netlink.c
@@ -45,7 +45,7 @@ void w1_netlink_send(struct w1_master *dev, struct w1_netlink_msg *msg)
memcpy(w, msg, sizeof(struct w1_netlink_msg));
- cn_netlink_send(m, 0, GFP_KERNEL);
+ cn_netlink_send(m, dev->portid, 0, GFP_KERNEL);
}
static void w1_send_slave(struct w1_master *dev, u64 rn)
@@ -54,53 +54,95 @@ static void w1_send_slave(struct w1_master *dev, u64 rn)
struct w1_netlink_msg *hdr = (struct w1_netlink_msg *)(msg + 1);
struct w1_netlink_cmd *cmd = (struct w1_netlink_cmd *)(hdr + 1);
int avail;
-
- /* update kernel slave list */
- w1_slave_found(dev, rn);
+ u64 *data;
avail = dev->priv_size - cmd->len;
- if (avail > 8) {
- u64 *data = (void *)(cmd + 1) + cmd->len;
+ if (avail < 8) {
+ msg->ack++;
+ cn_netlink_send(msg, dev->portid, 0, GFP_KERNEL);
- *data = rn;
- cmd->len += 8;
- hdr->len += 8;
- msg->len += 8;
- return;
+ msg->len = sizeof(struct w1_netlink_msg) +
+ sizeof(struct w1_netlink_cmd);
+ hdr->len = sizeof(struct w1_netlink_cmd);
+ cmd->len = 0;
}
- msg->ack++;
- cn_netlink_send(msg, 0, GFP_KERNEL);
+ data = (void *)(cmd + 1) + cmd->len;
- msg->len = sizeof(struct w1_netlink_msg) + sizeof(struct w1_netlink_cmd);
- hdr->len = sizeof(struct w1_netlink_cmd);
- cmd->len = 0;
+ *data = rn;
+ cmd->len += 8;
+ hdr->len += 8;
+ msg->len += 8;
}
-static int w1_process_search_command(struct w1_master *dev, struct cn_msg *msg,
- unsigned int avail)
+static void w1_found_send_slave(struct w1_master *dev, u64 rn)
{
- struct w1_netlink_msg *hdr = (struct w1_netlink_msg *)(msg + 1);
- struct w1_netlink_cmd *cmd = (struct w1_netlink_cmd *)(hdr + 1);
- int search_type = (cmd->cmd == W1_CMD_ALARM_SEARCH)?W1_ALARM_SEARCH:W1_SEARCH;
+ /* update kernel slave list */
+ w1_slave_found(dev, rn);
- dev->priv = msg;
- dev->priv_size = avail;
+ w1_send_slave(dev, rn);
+}
+
+/* Get the current slave list, or search (with or without alarm) */
+static int w1_get_slaves(struct w1_master *dev,
+ struct cn_msg *req_msg, struct w1_netlink_msg *req_hdr,
+ struct w1_netlink_cmd *req_cmd)
+{
+ struct cn_msg *msg;
+ struct w1_netlink_msg *hdr;
+ struct w1_netlink_cmd *cmd;
+ struct w1_slave *sl;
+
+ msg = kzalloc(PAGE_SIZE, GFP_KERNEL);
+ if (!msg)
+ return -ENOMEM;
+
+ msg->id = req_msg->id;
+ msg->seq = req_msg->seq;
+ msg->ack = 0;
+ msg->len = sizeof(struct w1_netlink_msg) +
+ sizeof(struct w1_netlink_cmd);
+
+ hdr = (struct w1_netlink_msg *)(msg + 1);
+ cmd = (struct w1_netlink_cmd *)(hdr + 1);
+
+ hdr->type = W1_MASTER_CMD;
+ hdr->id = req_hdr->id;
+ hdr->len = sizeof(struct w1_netlink_cmd);
+
+ cmd->cmd = req_cmd->cmd;
+ cmd->len = 0;
- w1_search_process_cb(dev, search_type, w1_send_slave);
+ dev->priv = msg;
+ dev->priv_size = PAGE_SIZE - msg->len - sizeof(struct cn_msg);
+
+ if (req_cmd->cmd == W1_CMD_LIST_SLAVES) {
+ __u64 rn;
+ mutex_lock(&dev->list_mutex);
+ list_for_each_entry(sl, &dev->slist, w1_slave_entry) {
+ memcpy(&rn, &sl->reg_num, sizeof(rn));
+ w1_send_slave(dev, rn);
+ }
+ mutex_unlock(&dev->list_mutex);
+ } else {
+ w1_search_process_cb(dev, cmd->cmd == W1_CMD_ALARM_SEARCH ?
+ W1_ALARM_SEARCH : W1_SEARCH, w1_found_send_slave);
+ }
msg->ack = 0;
- cn_netlink_send(msg, 0, GFP_KERNEL);
+ cn_netlink_send(msg, dev->portid, 0, GFP_KERNEL);
dev->priv = NULL;
dev->priv_size = 0;
+ kfree(msg);
+
return 0;
}
static int w1_send_read_reply(struct cn_msg *msg, struct w1_netlink_msg *hdr,
- struct w1_netlink_cmd *cmd)
+ struct w1_netlink_cmd *cmd, u32 portid)
{
void *data;
struct w1_netlink_msg *h;
@@ -131,7 +173,7 @@ static int w1_send_read_reply(struct cn_msg *msg, struct w1_netlink_msg *hdr,
memcpy(c->data, cmd->data, c->len);
- err = cn_netlink_send(cm, 0, GFP_KERNEL);
+ err = cn_netlink_send(cm, portid, 0, GFP_KERNEL);
kfree(data);
@@ -146,11 +188,11 @@ static int w1_process_command_io(struct w1_master *dev, struct cn_msg *msg,
switch (cmd->cmd) {
case W1_CMD_TOUCH:
w1_touch_block(dev, cmd->data, cmd->len);
- w1_send_read_reply(msg, hdr, cmd);
+ w1_send_read_reply(msg, hdr, cmd, dev->portid);
break;
case W1_CMD_READ:
w1_read_block(dev, cmd->data, cmd->len);
- w1_send_read_reply(msg, hdr, cmd);
+ w1_send_read_reply(msg, hdr, cmd, dev->portid);
break;
case W1_CMD_WRITE:
w1_write_block(dev, cmd->data, cmd->len);
@@ -163,38 +205,57 @@ static int w1_process_command_io(struct w1_master *dev, struct cn_msg *msg,
return err;
}
-static int w1_process_command_master(struct w1_master *dev, struct cn_msg *req_msg,
- struct w1_netlink_msg *req_hdr, struct w1_netlink_cmd *req_cmd)
+static int w1_process_command_addremove(struct w1_master *dev,
+ struct cn_msg *msg, struct w1_netlink_msg *hdr,
+ struct w1_netlink_cmd *cmd)
{
- int err = -EINVAL;
- struct cn_msg *msg;
- struct w1_netlink_msg *hdr;
- struct w1_netlink_cmd *cmd;
+ struct w1_slave *sl;
+ int err = 0;
+ struct w1_reg_num *id;
- msg = kzalloc(PAGE_SIZE, GFP_KERNEL);
- if (!msg)
- return -ENOMEM;
+ if (cmd->len != 8)
+ return -EINVAL;
- msg->id = req_msg->id;
- msg->seq = req_msg->seq;
- msg->ack = 0;
- msg->len = sizeof(struct w1_netlink_msg) + sizeof(struct w1_netlink_cmd);
+ id = (struct w1_reg_num *)cmd->data;
- hdr = (struct w1_netlink_msg *)(msg + 1);
- cmd = (struct w1_netlink_cmd *)(hdr + 1);
+ sl = w1_slave_search_device(dev, id);
+ switch (cmd->cmd) {
+ case W1_CMD_SLAVE_ADD:
+ if (sl)
+ err = -EINVAL;
+ else
+ err = w1_attach_slave_device(dev, id);
+ break;
+ case W1_CMD_SLAVE_REMOVE:
+ if (sl)
+ w1_slave_detach(sl);
+ else
+ err = -EINVAL;
+ break;
+ default:
+ err = -EINVAL;
+ break;
+ }
- hdr->type = W1_MASTER_CMD;
- hdr->id = req_hdr->id;
- hdr->len = sizeof(struct w1_netlink_cmd);
+ return err;
+}
- cmd->cmd = req_cmd->cmd;
- cmd->len = 0;
+static int w1_process_command_master(struct w1_master *dev,
+ struct cn_msg *req_msg, struct w1_netlink_msg *req_hdr,
+ struct w1_netlink_cmd *req_cmd)
+{
+ int err = -EINVAL;
- switch (cmd->cmd) {
+ /* drop bus_mutex for search (does it's own locking), and add/remove
+ * which doesn't use the bus
+ */
+ switch (req_cmd->cmd) {
case W1_CMD_SEARCH:
case W1_CMD_ALARM_SEARCH:
- err = w1_process_search_command(dev, msg,
- PAGE_SIZE - msg->len - sizeof(struct cn_msg));
+ case W1_CMD_LIST_SLAVES:
+ mutex_unlock(&dev->bus_mutex);
+ err = w1_get_slaves(dev, req_msg, req_hdr, req_cmd);
+ mutex_lock(&dev->bus_mutex);
break;
case W1_CMD_READ:
case W1_CMD_WRITE:
@@ -204,12 +265,20 @@ static int w1_process_command_master(struct w1_master *dev, struct cn_msg *req_m
case W1_CMD_RESET:
err = w1_reset_bus(dev);
break;
+ case W1_CMD_SLAVE_ADD:
+ case W1_CMD_SLAVE_REMOVE:
+ mutex_unlock(&dev->bus_mutex);
+ mutex_lock(&dev->mutex);
+ err = w1_process_command_addremove(dev, req_msg, req_hdr,
+ req_cmd);
+ mutex_unlock(&dev->mutex);
+ mutex_lock(&dev->bus_mutex);
+ break;
default:
err = -EINVAL;
break;
}
- kfree(msg);
return err;
}
@@ -223,7 +292,8 @@ static int w1_process_command_slave(struct w1_slave *sl, struct cn_msg *msg,
return w1_process_command_io(sl->master, msg, hdr, cmd);
}
-static int w1_process_command_root(struct cn_msg *msg, struct w1_netlink_msg *mcmd)
+static int w1_process_command_root(struct cn_msg *msg,
+ struct w1_netlink_msg *mcmd, u32 portid)
{
struct w1_master *m;
struct cn_msg *cn;
@@ -256,7 +326,7 @@ static int w1_process_command_root(struct cn_msg *msg, struct w1_netlink_msg *mc
mutex_lock(&w1_mlock);
list_for_each_entry(m, &w1_masters, w1_master_entry) {
if (cn->len + sizeof(*id) > PAGE_SIZE - sizeof(struct cn_msg)) {
- cn_netlink_send(cn, 0, GFP_KERNEL);
+ cn_netlink_send(cn, portid, 0, GFP_KERNEL);
cn->ack++;
cn->len = sizeof(struct w1_netlink_msg);
w->len = 0;
@@ -269,7 +339,7 @@ static int w1_process_command_root(struct cn_msg *msg, struct w1_netlink_msg *mc
id++;
}
cn->ack = 0;
- cn_netlink_send(cn, 0, GFP_KERNEL);
+ cn_netlink_send(cn, portid, 0, GFP_KERNEL);
mutex_unlock(&w1_mlock);
kfree(cn);
@@ -277,7 +347,7 @@ static int w1_process_command_root(struct cn_msg *msg, struct w1_netlink_msg *mc
}
static int w1_netlink_send_error(struct cn_msg *rcmsg, struct w1_netlink_msg *rmsg,
- struct w1_netlink_cmd *rcmd, int error)
+ struct w1_netlink_cmd *rcmd, int portid, int error)
{
struct cn_msg *cmsg;
struct w1_netlink_msg *msg;
@@ -304,35 +374,147 @@ static int w1_netlink_send_error(struct cn_msg *rcmsg, struct w1_netlink_msg *rm
cmsg->len += sizeof(*cmd);
}
- error = cn_netlink_send(cmsg, 0, GFP_KERNEL);
+ error = cn_netlink_send(cmsg, portid, 0, GFP_KERNEL);
kfree(cmsg);
return error;
}
+/* Bundle together a reference count, the full message, and broken out
+ * commands to be executed on each w1 master kthread in one memory allocation.
+ */
+struct w1_cb_block {
+ atomic_t refcnt;
+ u32 portid; /* Sending process port ID */
+ struct cn_msg msg;
+ /* cn_msg data */
+ /* one or more variable length struct w1_cb_node */
+};
+struct w1_cb_node {
+ struct w1_async_cmd async;
+ /* pointers within w1_cb_block and msg data */
+ struct w1_cb_block *block;
+ struct w1_netlink_msg *m;
+ struct w1_slave *sl;
+ struct w1_master *dev;
+};
+
+static void w1_process_cb(struct w1_master *dev, struct w1_async_cmd *async_cmd)
+{
+ struct w1_cb_node *node = container_of(async_cmd, struct w1_cb_node,
+ async);
+ u16 mlen = node->m->len;
+ u8 *cmd_data = node->m->data;
+ int err = 0;
+ struct w1_slave *sl = node->sl;
+ struct w1_netlink_cmd *cmd = NULL;
+
+ mutex_lock(&dev->bus_mutex);
+ dev->portid = node->block->portid;
+ if (sl && w1_reset_select_slave(sl))
+ err = -ENODEV;
+
+ while (mlen && !err) {
+ cmd = (struct w1_netlink_cmd *)cmd_data;
+
+ if (cmd->len + sizeof(struct w1_netlink_cmd) > mlen) {
+ err = -E2BIG;
+ break;
+ }
+
+ if (sl)
+ err = w1_process_command_slave(sl, &node->block->msg,
+ node->m, cmd);
+ else
+ err = w1_process_command_master(dev, &node->block->msg,
+ node->m, cmd);
+
+ w1_netlink_send_error(&node->block->msg, node->m, cmd,
+ node->block->portid, err);
+ err = 0;
+
+ cmd_data += cmd->len + sizeof(struct w1_netlink_cmd);
+ mlen -= cmd->len + sizeof(struct w1_netlink_cmd);
+ }
+
+ if (!cmd || err)
+ w1_netlink_send_error(&node->block->msg, node->m, cmd,
+ node->block->portid, err);
+
+ if (sl)
+ w1_unref_slave(sl);
+ else
+ atomic_dec(&dev->refcnt);
+ dev->portid = 0;
+ mutex_unlock(&dev->bus_mutex);
+
+ mutex_lock(&dev->list_mutex);
+ list_del(&async_cmd->async_entry);
+ mutex_unlock(&dev->list_mutex);
+
+ if (atomic_sub_return(1, &node->block->refcnt) == 0)
+ kfree(node->block);
+}
+
static void w1_cn_callback(struct cn_msg *msg, struct netlink_skb_parms *nsp)
{
struct w1_netlink_msg *m = (struct w1_netlink_msg *)(msg + 1);
- struct w1_netlink_cmd *cmd;
struct w1_slave *sl;
struct w1_master *dev;
+ u16 msg_len;
int err = 0;
+ struct w1_cb_block *block = NULL;
+ struct w1_cb_node *node = NULL;
+ int node_count = 0;
+
+ /* Count the number of master or slave commands there are to allocate
+ * space for one cb_node each.
+ */
+ msg_len = msg->len;
+ while (msg_len && !err) {
+ if (m->len + sizeof(struct w1_netlink_msg) > msg_len) {
+ err = -E2BIG;
+ break;
+ }
+
+ if (m->type == W1_MASTER_CMD || m->type == W1_SLAVE_CMD)
+ ++node_count;
- while (msg->len && !err) {
+ msg_len -= sizeof(struct w1_netlink_msg) + m->len;
+ m = (struct w1_netlink_msg *)(((u8 *)m) +
+ sizeof(struct w1_netlink_msg) + m->len);
+ }
+ m = (struct w1_netlink_msg *)(msg + 1);
+ if (node_count) {
+ /* msg->len doesn't include itself */
+ long size = sizeof(struct w1_cb_block) + msg->len +
+ node_count*sizeof(struct w1_cb_node);
+ block = kmalloc(size, GFP_KERNEL);
+ if (!block) {
+ w1_netlink_send_error(msg, m, NULL, nsp->portid,
+ -ENOMEM);
+ return;
+ }
+ atomic_set(&block->refcnt, 1);
+ block->portid = nsp->portid;
+ memcpy(&block->msg, msg, sizeof(*msg) + msg->len);
+ node = (struct w1_cb_node *)((u8 *)block->msg.data + msg->len);
+ }
+
+ msg_len = msg->len;
+ while (msg_len && !err) {
struct w1_reg_num id;
u16 mlen = m->len;
- u8 *cmd_data = m->data;
dev = NULL;
sl = NULL;
- cmd = NULL;
memcpy(&id, m->id.id, sizeof(id));
#if 0
printk("%s: %02x.%012llx.%02x: type=%02x, len=%u.\n",
__func__, id.family, (unsigned long long)id.id, id.crc, m->type, m->len);
#endif
- if (m->len + sizeof(struct w1_netlink_msg) > msg->len) {
+ if (m->len + sizeof(struct w1_netlink_msg) > msg_len) {
err = -E2BIG;
break;
}
@@ -344,7 +526,7 @@ static void w1_cn_callback(struct cn_msg *msg, struct netlink_skb_parms *nsp)
if (sl)
dev = sl->master;
} else {
- err = w1_process_command_root(msg, m);
+ err = w1_process_command_root(msg, m, nsp->portid);
goto out_cont;
}
@@ -357,41 +539,24 @@ static void w1_cn_callback(struct cn_msg *msg, struct netlink_skb_parms *nsp)
if (!mlen)
goto out_cont;
- mutex_lock(&dev->mutex);
-
- if (sl && w1_reset_select_slave(sl)) {
- err = -ENODEV;
- goto out_up;
- }
+ atomic_inc(&block->refcnt);
+ node->async.cb = w1_process_cb;
+ node->block = block;
+ node->m = (struct w1_netlink_msg *)((u8 *)&block->msg +
+ (size_t)((u8 *)m - (u8 *)msg));
+ node->sl = sl;
+ node->dev = dev;
- while (mlen) {
- cmd = (struct w1_netlink_cmd *)cmd_data;
+ mutex_lock(&dev->list_mutex);
+ list_add_tail(&node->async.async_entry, &dev->async_list);
+ wake_up_process(dev->thread);
+ mutex_unlock(&dev->list_mutex);
+ ++node;
- if (cmd->len + sizeof(struct w1_netlink_cmd) > mlen) {
- err = -E2BIG;
- break;
- }
-
- if (sl)
- err = w1_process_command_slave(sl, msg, m, cmd);
- else
- err = w1_process_command_master(dev, msg, m, cmd);
-
- w1_netlink_send_error(msg, m, cmd, err);
- err = 0;
-
- cmd_data += cmd->len + sizeof(struct w1_netlink_cmd);
- mlen -= cmd->len + sizeof(struct w1_netlink_cmd);
- }
-out_up:
- atomic_dec(&dev->refcnt);
- if (sl)
- atomic_dec(&sl->refcnt);
- mutex_unlock(&dev->mutex);
out_cont:
- if (!cmd || err)
- w1_netlink_send_error(msg, m, cmd, err);
- msg->len -= sizeof(struct w1_netlink_msg) + m->len;
+ if (err)
+ w1_netlink_send_error(msg, m, NULL, nsp->portid, err);
+ msg_len -= sizeof(struct w1_netlink_msg) + m->len;
m = (struct w1_netlink_msg *)(((u8 *)m) + sizeof(struct w1_netlink_msg) + m->len);
/*
@@ -400,6 +565,8 @@ out_cont:
if (err == -ENODEV)
err = 0;
}
+ if (block && atomic_sub_return(1, &block->refcnt) == 0)
+ kfree(block);
}
int w1_init_netlink(void)
diff --git a/drivers/w1/w1_netlink.h b/drivers/w1/w1_netlink.h
index b0922dc2965..1e9504e6765 100644
--- a/drivers/w1/w1_netlink.h
+++ b/drivers/w1/w1_netlink.h
@@ -27,6 +27,18 @@
#include "w1.h"
+/**
+ * enum w1_netlink_message_types - message type
+ *
+ * @W1_SLAVE_ADD: notification that a slave device was added
+ * @W1_SLAVE_REMOVE: notification that a slave device was removed
+ * @W1_MASTER_ADD: notification that a new bus master was added
+ * @W1_MASTER_REMOVE: notification that a bus masterwas removed
+ * @W1_MASTER_CMD: initiate operations on a specific master
+ * @W1_SLAVE_CMD: sends reset, selects the slave, then does a read/write/touch
+ * operation
+ * @W1_LIST_MASTERS: used to determine the bus master identifiers
+ */
enum w1_netlink_message_types {
W1_SLAVE_ADD = 0,
W1_SLAVE_REMOVE,
@@ -52,6 +64,22 @@ struct w1_netlink_msg
__u8 data[0];
};
+/**
+ * enum w1_commands - commands available for master or slave operations
+ * @W1_CMD_READ: read len bytes
+ * @W1_CMD_WRITE: write len bytes
+ * @W1_CMD_SEARCH: initiate a standard search, returns only the slave
+ * devices found during that search
+ * @W1_CMD_ALARM_SEARCH: search for devices that are currently alarming
+ * @W1_CMD_TOUCH: Touches a series of bytes.
+ * @W1_CMD_RESET: sends a bus reset on the given master
+ * @W1_CMD_SLAVE_ADD: adds a slave to the given master,
+ * 8 byte slave id at data[0]
+ * @W1_CMD_SLAVE_REMOVE: removes a slave to the given master,
+ * 8 byte slave id at data[0]
+ * @W1_CMD_LIST_SLAVES: list of slaves registered on this master
+ * @W1_CMD_MAX: number of available commands
+ */
enum w1_commands {
W1_CMD_READ = 0,
W1_CMD_WRITE,
@@ -59,7 +87,10 @@ enum w1_commands {
W1_CMD_ALARM_SEARCH,
W1_CMD_TOUCH,
W1_CMD_RESET,
- W1_CMD_MAX,
+ W1_CMD_SLAVE_ADD,
+ W1_CMD_SLAVE_REMOVE,
+ W1_CMD_LIST_SLAVES,
+ W1_CMD_MAX
};
struct w1_netlink_cmd