summaryrefslogtreecommitdiffstats
path: root/drivers/watchdog/f71808e_wdt.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/watchdog/f71808e_wdt.c')
-rw-r--r--drivers/watchdog/f71808e_wdt.c78
1 files changed, 63 insertions, 15 deletions
diff --git a/drivers/watchdog/f71808e_wdt.c b/drivers/watchdog/f71808e_wdt.c
index 65e579635db..d4d8d1fdccc 100644
--- a/drivers/watchdog/f71808e_wdt.c
+++ b/drivers/watchdog/f71808e_wdt.c
@@ -42,18 +42,21 @@
#define SIO_REG_DEVID 0x20 /* Device ID (2 bytes) */
#define SIO_REG_DEVREV 0x22 /* Device revision */
#define SIO_REG_MANID 0x23 /* Fintek ID (2 bytes) */
+#define SIO_REG_ROM_ADDR_SEL 0x27 /* ROM address select */
+#define SIO_REG_MFUNCT1 0x29 /* Multi function select 1 */
+#define SIO_REG_MFUNCT2 0x2a /* Multi function select 2 */
+#define SIO_REG_MFUNCT3 0x2b /* Multi function select 3 */
#define SIO_REG_ENABLE 0x30 /* Logical device enable */
#define SIO_REG_ADDR 0x60 /* Logical device address (2 bytes) */
#define SIO_FINTEK_ID 0x1934 /* Manufacturers ID */
-#define SIO_F71808_ID 0x0901 /* Chipset ID */
-#define SIO_F71858_ID 0x0507 /* Chipset ID */
+#define SIO_F71808_ID 0x0901 /* Chipset ID */
+#define SIO_F71858_ID 0x0507 /* Chipset ID */
#define SIO_F71862_ID 0x0601 /* Chipset ID */
+#define SIO_F71869_ID 0x0814 /* Chipset ID */
#define SIO_F71882_ID 0x0541 /* Chipset ID */
#define SIO_F71889_ID 0x0723 /* Chipset ID */
-#define F71882FG_REG_START 0x01
-
#define F71808FG_REG_WDO_CONF 0xf0
#define F71808FG_REG_WDT_CONF 0xf5
#define F71808FG_REG_WD_TIME 0xf6
@@ -70,13 +73,15 @@
#define WATCHDOG_MAX_TIMEOUT (60 * 255)
#define WATCHDOG_PULSE_WIDTH 125 /* 125 ms, default pulse width for
watchdog signal */
+#define WATCHDOG_F71862FG_PIN 63 /* default watchdog reset output
+ pin number 63 */
static unsigned short force_id;
module_param(force_id, ushort, 0);
MODULE_PARM_DESC(force_id, "Override the detected device ID");
static const int max_timeout = WATCHDOG_MAX_TIMEOUT;
-static int timeout = 60; /* default timeout in seconds */
+static int timeout = WATCHDOG_TIMEOUT; /* default timeout in seconds */
module_param(timeout, int, 0);
MODULE_PARM_DESC(timeout,
"Watchdog timeout in seconds. 1<= timeout <="
@@ -89,6 +94,12 @@ MODULE_PARM_DESC(pulse_width,
"Watchdog signal pulse width. 0(=level), 1 ms, 25 ms, 125 ms or 5000 ms"
" (default=" __MODULE_STRING(WATCHDOG_PULSE_WIDTH) ")");
+static unsigned int f71862fg_pin = WATCHDOG_F71862FG_PIN;
+module_param(f71862fg_pin, uint, 0);
+MODULE_PARM_DESC(f71862fg_pin,
+ "Watchdog f71862fg reset output pin configuration. Choose pin 56 or 63"
+ " (default=" __MODULE_STRING(WATCHDOG_F71862FG_PIN)")");
+
static int nowayout = WATCHDOG_NOWAYOUT;
module_param(nowayout, bool, 0444);
MODULE_PARM_DESC(nowayout, "Disable watchdog shutdown on close");
@@ -98,12 +109,13 @@ module_param(start_withtimeout, uint, 0);
MODULE_PARM_DESC(start_withtimeout, "Start watchdog timer on module load with"
" given initial timeout. Zero (default) disables this feature.");
-enum chips { f71808fg, f71858fg, f71862fg, f71882fg, f71889fg };
+enum chips { f71808fg, f71858fg, f71862fg, f71869, f71882fg, f71889fg };
static const char *f71808e_names[] = {
"f71808fg",
"f71858fg",
"f71862fg",
+ "f71869",
"f71882fg",
"f71889fg",
};
@@ -282,6 +294,28 @@ exit_unlock:
return err;
}
+static int f71862fg_pin_configure(unsigned short ioaddr)
+{
+ /* When ioaddr is non-zero the calling function has to take care of
+ mutex handling and superio preparation! */
+
+ if (f71862fg_pin == 63) {
+ if (ioaddr) {
+ /* SPI must be disabled first to use this pin! */
+ superio_clear_bit(ioaddr, SIO_REG_ROM_ADDR_SEL, 6);
+ superio_set_bit(ioaddr, SIO_REG_MFUNCT3, 4);
+ }
+ } else if (f71862fg_pin == 56) {
+ if (ioaddr)
+ superio_set_bit(ioaddr, SIO_REG_MFUNCT1, 1);
+ } else {
+ printk(KERN_ERR DRVNAME ": Invalid argument f71862fg_pin=%d\n",
+ f71862fg_pin);
+ return -EINVAL;
+ }
+ return 0;
+}
+
static int watchdog_start(void)
{
/* Make sure we don't die as soon as the watchdog is enabled below */
@@ -299,19 +333,30 @@ static int watchdog_start(void)
switch (watchdog.type) {
case f71808fg:
/* Set pin 21 to GPIO23/WDTRST#, then to WDTRST# */
- superio_clear_bit(watchdog.sioaddr, 0x2a, 3);
- superio_clear_bit(watchdog.sioaddr, 0x2b, 3);
+ superio_clear_bit(watchdog.sioaddr, SIO_REG_MFUNCT2, 3);
+ superio_clear_bit(watchdog.sioaddr, SIO_REG_MFUNCT3, 3);
+ break;
+
+ case f71862fg:
+ err = f71862fg_pin_configure(watchdog.sioaddr);
+ if (err)
+ goto exit_superio;
+ break;
+
+ case f71869:
+ /* GPIO14 --> WDTRST# */
+ superio_clear_bit(watchdog.sioaddr, SIO_REG_MFUNCT1, 4);
break;
case f71882fg:
/* Set pin 56 to WDTRST# */
- superio_set_bit(watchdog.sioaddr, 0x29, 1);
+ superio_set_bit(watchdog.sioaddr, SIO_REG_MFUNCT1, 1);
break;
case f71889fg:
/* set pin 40 to WDTRST# */
- superio_outb(watchdog.sioaddr, 0x2b,
- superio_inb(watchdog.sioaddr, 0x2b) & 0xcf);
+ superio_outb(watchdog.sioaddr, SIO_REG_MFUNCT3,
+ superio_inb(watchdog.sioaddr, SIO_REG_MFUNCT3) & 0xcf);
break;
default:
@@ -711,16 +756,19 @@ static int __init f71808e_find(int sioaddr)
case SIO_F71808_ID:
watchdog.type = f71808fg;
break;
+ case SIO_F71862_ID:
+ watchdog.type = f71862fg;
+ err = f71862fg_pin_configure(0); /* validate module parameter */
+ break;
+ case SIO_F71869_ID:
+ watchdog.type = f71869;
+ break;
case SIO_F71882_ID:
watchdog.type = f71882fg;
break;
case SIO_F71889_ID:
watchdog.type = f71889fg;
break;
- case SIO_F71862_ID:
- /* These have a watchdog, though it isn't implemented (yet). */
- err = -ENOSYS;
- goto exit;
case SIO_F71858_ID:
/* Confirmed (by datasheet) not to have a watchdog. */
err = -ENODEV;