1 files changed, 79 insertions, 9 deletions

diff --git a/drivers/watchdog/iTCO_vendor_support.c b/drivers/watchdog/iTCO_vendor_support.c
index d3c0f6de552..5133bca5ccb 100644
--- a/drivers/watchdog/iTCO_vendor_support.c
+++ b/drivers/watchdog/iTCO_vendor_support.c
@@ -19,7 +19,7 @@
 
 /* Module and version information */
 #define DRV_NAME	"iTCO_vendor_support"
-#define DRV_VERSION	"1.03"
+#define DRV_VERSION	"1.04"
 #define PFX		DRV_NAME ": "
 
 /* Includes */
@@ -35,20 +35,23 @@
 #include "iTCO_vendor.h"
 
 /* iTCO defines */
-#define	SMI_EN		acpibase + 0x30	/* SMI Control and Enable Register */
-#define	TCOBASE		acpibase + 0x60	/* TCO base address */
-#define	TCO1_STS	TCOBASE + 0x04	/* TCO1 Status Register */
+#define	SMI_EN		(acpibase + 0x30) /* SMI Control and Enable Register */
+#define	TCOBASE		(acpibase + 0x60) /* TCO base address */
+#define	TCO1_STS	(TCOBASE + 0x04)  /* TCO1 Status Register */
 
 /* List of vendor support modes */
 /* SuperMicro Pentium 3 Era 370SSE+-OEM1/P3TSSE */
 #define SUPERMICRO_OLD_BOARD	1
 /* SuperMicro Pentium 4 / Xeon 4 / EMT64T Era Systems */
 #define SUPERMICRO_NEW_BOARD	2
+/* Broken BIOS */
+#define BROKEN_BIOS		911
 
 static int vendorsupport;
 module_param(vendorsupport, int, 0);
 MODULE_PARM_DESC(vendorsupport, "iTCO vendor specific support mode, default="
-			"0 (none), 1=SuperMicro Pent3, 2=SuperMicro Pent4+");
+			"0 (none), 1=SuperMicro Pent3, 2=SuperMicro Pent4+, "
+							"911=Broken SMI BIOS");
 
 /*
  *	Vendor Specific Support
@@ -243,25 +246,92 @@ static void supermicro_new_pre_set_heartbeat(unsigned int heartbeat)
 }
 
 /*
+ *	Vendor Support: 911
+ *	Board: Some Intel ICHx based motherboards
+ *	iTCO chipset: ICH7+
+ *
+ *	Some Intel motherboards have a broken BIOS implementation: i.e.
+ *	the SMI handler clear's the TIMEOUT bit in the TC01_STS register
+ *	and does not reload the time. Thus the TCO watchdog does not reboot
+ *	the system.
+ *
+ *	These are the conclusions of Andriy Gapon <avg@icyb.net.ua> after
+ *	debugging: the SMI handler is quite simple - it tests value in
+ *	TCO1_CNT against 0x800, i.e. checks TCO_TMR_HLT. If the bit is set
+ *	the handler goes into an infinite loop, apparently to allow the
+ *	second timeout and reboot. Otherwise it simply clears TIMEOUT bit
+ *	in TCO1_STS and that's it.
+ *	So the logic seems to be reversed, because it is hard to see how
+ *	TIMEOUT can get set to 1 and SMI generated when TCO_TMR_HLT is set
+ *	(other than a transitional effect).
+ *
+ *	The only fix found to get the motherboard(s) to reboot is to put
+ *	the glb_smi_en bit to 0. This is a dirty hack that bypasses the
+ *	broken code by disabling Global SMI.
+ *
+ *	WARNING: globally disabling SMI could possibly lead to dramatic
+ *	problems, especially on laptops! I.e. various ACPI things where
+ *	SMI is used for communication between OS and firmware.
+ *
+ *	Don't use this fix if you don't need to!!!
+ */
+
+static void broken_bios_start(unsigned long acpibase)
+{
+	unsigned long val32;
+
+	val32 = inl(SMI_EN);
+	/* Bit 13: TCO_EN     -> 0 = Disables TCO logic generating an SMI#
+	   Bit  0: GBL_SMI_EN -> 0 = No SMI# will be generated by ICH. */
+	val32 &= 0xffffdffe;
+	outl(val32, SMI_EN);
+}
+
+static void broken_bios_stop(unsigned long acpibase)
+{
+	unsigned long val32;
+
+	val32 = inl(SMI_EN);
+	/* Bit 13: TCO_EN     -> 1 = Enables TCO logic generating an SMI#
+	   Bit  0: GBL_SMI_EN -> 1 = Turn global SMI on again. */
+	val32 |= 0x00002001;
+	outl(val32, SMI_EN);
+}
+
+/*
  *	Generic Support Functions
  */
 
 void iTCO_vendor_pre_start(unsigned long acpibase,
 			   unsigned int heartbeat)
 {
-	if (vendorsupport == SUPERMICRO_OLD_BOARD)
+	switch (vendorsupport) {
+	case SUPERMICRO_OLD_BOARD:
 		supermicro_old_pre_start(acpibase);
-	else if (vendorsupport == SUPERMICRO_NEW_BOARD)
+		break;
+	case SUPERMICRO_NEW_BOARD:
 		supermicro_new_pre_start(heartbeat);
+		break;
+	case BROKEN_BIOS:
+		broken_bios_start(acpibase);
+		break;
+	}
 }
 EXPORT_SYMBOL(iTCO_vendor_pre_start);
 
 void iTCO_vendor_pre_stop(unsigned long acpibase)
 {
-	if (vendorsupport == SUPERMICRO_OLD_BOARD)
+	switch (vendorsupport) {
+	case SUPERMICRO_OLD_BOARD:
 		supermicro_old_pre_stop(acpibase);
-	else if (vendorsupport == SUPERMICRO_NEW_BOARD)
+		break;
+	case SUPERMICRO_NEW_BOARD:
 		supermicro_new_pre_stop();
+		break;
+	case BROKEN_BIOS:
+		broken_bios_stop(acpibase);
+		break;
+	}
 }
 EXPORT_SYMBOL(iTCO_vendor_pre_stop);