summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/hwmon/Kconfig7
-rw-r--r--drivers/hwmon/w83627hf.c72
2 files changed, 62 insertions, 17 deletions
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 7230d4e0819..99cdc612d2c 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -406,13 +406,14 @@ config SENSORS_W83L785TS
will be called w83l785ts.
config SENSORS_W83627HF
- tristate "Winbond W83627HF, W83627THF, W83637HF, W83697HF"
- depends on HWMON && I2C && EXPERIMENTAL
+ tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF"
+ depends on HWMON && I2C
select I2C_ISA
select HWMON_VID
help
If you say yes here you get support for the Winbond W836X7 series
- of sensor chips: the W83627HF, W83627THF, W83637HF, and the W83697HF
+ of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and
+ W83697HF.
This driver can also be built as a module. If so, the module
will be called w83627hf.
diff --git a/drivers/hwmon/w83627hf.c b/drivers/hwmon/w83627hf.c
index 3d4888c178c..992e3440270 100644
--- a/drivers/hwmon/w83627hf.c
+++ b/drivers/hwmon/w83627hf.c
@@ -28,6 +28,7 @@
w83627hf 9 3 2 3 0x20 0x5ca3 no yes(LPC)
w83627thf 7 3 3 3 0x90 0x5ca3 no yes(LPC)
w83637hf 7 3 3 3 0x80 0x5ca3 no yes(LPC)
+ w83687thf 7 3 3 3 0x90 0x5ca3 no yes(LPC)
w83697hf 8 2 2 2 0x60 0x5ca3 no yes(LPC)
For other winbond chips, and for i2c support in the above chips,
@@ -63,7 +64,7 @@ MODULE_PARM_DESC(force_i2c,
static unsigned short address;
/* Insmod parameters */
-enum chips { any_chip, w83627hf, w83627thf, w83697hf, w83637hf };
+enum chips { any_chip, w83627hf, w83627thf, w83697hf, w83637hf, w83687thf };
static int reset;
module_param(reset, bool, 0);
@@ -101,6 +102,10 @@ static int VAL; /* The value to read/write */
#define W83627THF_GPIO5_IOSR 0xf3 /* w83627thf only */
#define W83627THF_GPIO5_DR 0xf4 /* w83627thf only */
+#define W83687THF_VID_EN 0x29 /* w83687thf only */
+#define W83687THF_VID_CFG 0xF0 /* w83687thf only */
+#define W83687THF_VID_DATA 0xF1 /* w83687thf only */
+
static inline void
superio_outb(int reg, int val)
{
@@ -139,6 +144,7 @@ superio_exit(void)
#define W627THF_DEVID 0x82
#define W697_DEVID 0x60
#define W637_DEVID 0x70
+#define W687THF_DEVID 0x85
#define WINB_ACT_REG 0x30
#define WINB_BASE_REG 0x60
/* Constants specified below */
@@ -202,11 +208,11 @@ superio_exit(void)
#define W83627HF_REG_PWM1 0x5A
#define W83627HF_REG_PWM2 0x5B
-#define W83627THF_REG_PWM1 0x01 /* 697HF and 637HF too */
-#define W83627THF_REG_PWM2 0x03 /* 697HF and 637HF too */
-#define W83627THF_REG_PWM3 0x11 /* 637HF too */
+#define W83627THF_REG_PWM1 0x01 /* 697HF/637HF/687THF too */
+#define W83627THF_REG_PWM2 0x03 /* 697HF/637HF/687THF too */
+#define W83627THF_REG_PWM3 0x11 /* 637HF/687THF too */
-#define W83627THF_REG_VRM_OVT_CFG 0x18 /* 637HF too */
+#define W83627THF_REG_VRM_OVT_CFG 0x18 /* 637HF/687THF too */
static const u8 regpwm_627hf[] = { W83627HF_REG_PWM1, W83627HF_REG_PWM2 };
static const u8 regpwm[] = { W83627THF_REG_PWM1, W83627THF_REG_PWM2,
@@ -319,7 +325,7 @@ struct w83627hf_data {
Default = 3435.
Other Betas unimplemented */
u8 vrm;
- u8 vrm_ovt; /* Register value, 627thf & 637hf only */
+ u8 vrm_ovt; /* Register value, 627THF/637HF/687THF only */
};
@@ -414,7 +420,8 @@ static ssize_t show_in_0(struct w83627hf_data *data, char *buf, u8 reg)
long in0;
if ((data->vrm_ovt & 0x01) &&
- (w83627thf == data->type || w83637hf == data->type))
+ (w83627thf == data->type || w83637hf == data->type
+ || w83687thf == data->type))
/* use VRM9 calculation */
in0 = (long)((reg * 488 + 70000 + 50) / 100);
@@ -455,7 +462,8 @@ static ssize_t store_regs_in_min0(struct device *dev, struct device_attribute *a
mutex_lock(&data->update_lock);
if ((data->vrm_ovt & 0x01) &&
- (w83627thf == data->type || w83637hf == data->type))
+ (w83627thf == data->type || w83637hf == data->type
+ || w83687thf == data->type))
/* use VRM9 calculation */
data->in_min[0] =
@@ -482,7 +490,8 @@ static ssize_t store_regs_in_max0(struct device *dev, struct device_attribute *a
mutex_lock(&data->update_lock);
if ((data->vrm_ovt & 0x01) &&
- (w83627thf == data->type || w83637hf == data->type))
+ (w83627thf == data->type || w83637hf == data->type
+ || w83687thf == data->type))
/* use VRM9 calculation */
data->in_max[0] =
@@ -981,7 +990,8 @@ static int __init w83627hf_find(int sioaddr, unsigned short *addr)
if(val != W627_DEVID &&
val != W627THF_DEVID &&
val != W697_DEVID &&
- val != W637_DEVID) {
+ val != W637_DEVID &&
+ val != W687THF_DEVID) {
superio_exit();
return -ENODEV;
}
@@ -1035,6 +1045,8 @@ static int w83627hf_detect(struct i2c_adapter *adapter)
kind = w83627thf;
else if(val == W637_DEVID)
kind = w83637hf;
+ else if (val == W687THF_DEVID)
+ kind = w83687thf;
else {
dev_info(&adapter->dev,
"Unsupported chip (dev_id=0x%02X).\n", val);
@@ -1072,6 +1084,8 @@ static int w83627hf_detect(struct i2c_adapter *adapter)
client_name = "w83697hf";
} else if (kind == w83637hf) {
client_name = "w83637hf";
+ } else if (kind == w83687thf) {
+ client_name = "w83687thf";
}
/* Fill in the remaining client fields and put into the global list */
@@ -1107,7 +1121,7 @@ static int w83627hf_detect(struct i2c_adapter *adapter)
device_create_file_in(new_client, 2);
device_create_file_in(new_client, 3);
device_create_file_in(new_client, 4);
- if (kind != w83627thf && kind != w83637hf) {
+ if (kind == w83627hf || kind == w83697hf) {
device_create_file_in(new_client, 5);
device_create_file_in(new_client, 6);
}
@@ -1140,7 +1154,7 @@ static int w83627hf_detect(struct i2c_adapter *adapter)
device_create_file_pwm(new_client, 1);
device_create_file_pwm(new_client, 2);
- if (kind == w83627thf || kind == w83637hf)
+ if (kind == w83627thf || kind == w83637hf || kind == w83687thf)
device_create_file_pwm(new_client, 3);
device_create_file_sensor(new_client, 1);
@@ -1248,6 +1262,33 @@ exit:
return res;
}
+static int w83687thf_read_vid(struct i2c_client *client)
+{
+ int res = 0xff;
+
+ superio_enter();
+ superio_select(W83627HF_LD_HWM);
+
+ /* Make sure these GPIO pins are enabled */
+ if (!(superio_inb(W83687THF_VID_EN) & (1 << 2))) {
+ dev_dbg(&client->dev, "VID disabled, no VID function\n");
+ goto exit;
+ }
+
+ /* Make sure the pins are configured for input */
+ if (!(superio_inb(W83687THF_VID_CFG) & (1 << 4))) {
+ dev_dbg(&client->dev, "VID configured as output, "
+ "no VID function\n");
+ goto exit;
+ }
+
+ res = superio_inb(W83687THF_VID_DATA) & 0x3f;
+
+exit:
+ superio_exit();
+ return res;
+}
+
static int w83627hf_write_value(struct i2c_client *client, u16 reg, u16 value)
{
struct w83627hf_data *data = i2c_get_clientdata(client);
@@ -1325,10 +1366,13 @@ static void w83627hf_init_client(struct i2c_client *client)
data->vid = (lo & 0x0f) | ((hi & 0x01) << 4);
} else if (w83627thf == data->type) {
data->vid = w83627thf_read_gpio5(client);
+ } else if (w83687thf == data->type) {
+ data->vid = w83687thf_read_vid(client);
}
/* Read VRM & OVT Config only once */
- if (w83627thf == data->type || w83637hf == data->type) {
+ if (w83627thf == data->type || w83637hf == data->type
+ || w83687thf == data->type) {
data->vrm_ovt =
w83627hf_read_value(client, W83627THF_REG_VRM_OVT_CFG);
}
@@ -1395,7 +1439,7 @@ static struct w83627hf_data *w83627hf_update_device(struct device *dev)
for (i = 0; i <= 8; i++) {
/* skip missing sensors */
if (((data->type == w83697hf) && (i == 1)) ||
- ((data->type == w83627thf || data->type == w83637hf)
+ ((data->type != w83627hf && data->type != w83697hf)
&& (i == 5 || i == 6)))
continue;
data->in[i] =
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-27 15:29:09 +0000