diff options
Diffstat (limited to 'drivers')
28 files changed, 31 insertions, 31 deletions
diff --git a/drivers/acpi/acpica/hwxface.c b/drivers/acpi/acpica/hwxface.c index c2793a82f12..d707756228c 100644 --- a/drivers/acpi/acpica/hwxface.c +++ b/drivers/acpi/acpica/hwxface.c @@ -356,7 +356,7 @@ ACPI_EXPORT_SYMBOL(acpi_read_bit_register) * * PARAMETERS: register_id - ID of ACPI Bit Register to access * Value - Value to write to the register, in bit - * position zero. The bit is automaticallly + * position zero. The bit is automatically * shifted to the correct position. * * RETURN: Status diff --git a/drivers/block/xen-blkback/xenbus.c b/drivers/block/xen-blkback/xenbus.c index f759ad4584c..8069322e4c9 100644 --- a/drivers/block/xen-blkback/xenbus.c +++ b/drivers/block/xen-blkback/xenbus.c @@ -613,7 +613,7 @@ static void frontend_changed(struct xenbus_device *dev, case XenbusStateConnected: /* * Ensure we connect even when two watches fire in - * close successsion and we miss the intermediate value + * close succession and we miss the intermediate value * of frontend_state. */ if (dev->state == XenbusStateConnected) diff --git a/drivers/char/ipmi/ipmi_bt_sm.c b/drivers/char/ipmi/ipmi_bt_sm.c index 3ed20e8abc0..cdd4c09fda9 100644 --- a/drivers/char/ipmi/ipmi_bt_sm.c +++ b/drivers/char/ipmi/ipmi_bt_sm.c @@ -560,7 +560,7 @@ static enum si_sm_result bt_event(struct si_sm_data *bt, long time) BT_CONTROL(BT_H_BUSY); /* set */ /* - * Uncached, ordered writes should just proceeed serially but + * Uncached, ordered writes should just proceed serially but * some BMCs don't clear B2H_ATN with one hit. Fast-path a * workaround without too much penalty to the general case. */ diff --git a/drivers/edac/ppc4xx_edac.c b/drivers/edac/ppc4xx_edac.c index 38400963e24..fc757069c6a 100644 --- a/drivers/edac/ppc4xx_edac.c +++ b/drivers/edac/ppc4xx_edac.c @@ -142,7 +142,7 @@ /* * The ibm,sdram-4xx-ddr2 Device Control Registers (DCRs) are - * indirectly acccessed and have a base and length defined by the + * indirectly accessed and have a base and length defined by the * device tree. The base can be anything; however, we expect the * length to be precisely two registers, the first for the address * window and the second for the data window. diff --git a/drivers/media/video/zoran/zoran_driver.c b/drivers/media/video/zoran/zoran_driver.c index d4d05d2ace6..f6d26419445 100644 --- a/drivers/media/video/zoran/zoran_driver.c +++ b/drivers/media/video/zoran/zoran_driver.c @@ -1550,7 +1550,7 @@ static int zoran_enum_fmt(struct zoran *zr, struct v4l2_fmtdesc *fmt, int flag) if (zoran_formats[i].flags & flag && num++ == fmt->index) { strncpy(fmt->description, zoran_formats[i].name, sizeof(fmt->description) - 1); - /* fmt struct pre-zeroed, so adding '\0' not neeed */ + /* fmt struct pre-zeroed, so adding '\0' not needed */ fmt->pixelformat = zoran_formats[i].fourcc; if (zoran_formats[i].flags & ZORAN_FORMAT_COMPRESSED) fmt->flags |= V4L2_FMT_FLAG_COMPRESSED; diff --git a/drivers/message/fusion/lsi/mpi_ioc.h b/drivers/message/fusion/lsi/mpi_ioc.h index fd6222882a0..19fb21b8f0c 100644 --- a/drivers/message/fusion/lsi/mpi_ioc.h +++ b/drivers/message/fusion/lsi/mpi_ioc.h @@ -857,7 +857,7 @@ typedef struct _EVENT_DATA_SAS_DISCOVERY #define MPI_EVENT_SAS_DSCVRY_PHY_BITS_MASK (0xFFFF0000) #define MPI_EVENT_SAS_DSCVRY_PHY_BITS_SHIFT (16) -/* SAS Discovery Errror Event data */ +/* SAS Discovery Error Event data */ typedef struct _EVENT_DATA_DISCOVERY_ERROR { diff --git a/drivers/net/irda/nsc-ircc.c b/drivers/net/irda/nsc-ircc.c index b56636da6cc..2a4f2f15324 100644 --- a/drivers/net/irda/nsc-ircc.c +++ b/drivers/net/irda/nsc-ircc.c @@ -1664,7 +1664,7 @@ static int nsc_ircc_dma_xmit_complete(struct nsc_ircc_cb *self) switch_bank(iobase, BANK0); outb(inb(iobase+MCR) & ~MCR_DMA_EN, iobase+MCR); - /* Check for underrrun! */ + /* Check for underrun! */ if (inb(iobase+ASCR) & ASCR_TXUR) { self->netdev->stats.tx_errors++; self->netdev->stats.tx_fifo_errors++; diff --git a/drivers/net/irda/via-ircc.c b/drivers/net/irda/via-ircc.c index 6d6479049aa..2d456dd164f 100644 --- a/drivers/net/irda/via-ircc.c +++ b/drivers/net/irda/via-ircc.c @@ -942,14 +942,14 @@ static int via_ircc_dma_xmit_complete(struct via_ircc_cb *self) iobase = self->io.fir_base; /* Disable DMA */ // DisableDmaChannel(self->io.dma); - /* Check for underrrun! */ + /* Check for underrun! */ /* Clear bit, by writing 1 into it */ Tx_status = GetTXStatus(iobase); if (Tx_status & 0x08) { self->netdev->stats.tx_errors++; self->netdev->stats.tx_fifo_errors++; hwreset(self); -// how to clear underrrun ? + /* how to clear underrun? */ } else { self->netdev->stats.tx_packets++; ResetChip(iobase, 3); diff --git a/drivers/net/irda/w83977af_ir.c b/drivers/net/irda/w83977af_ir.c index c4366601b06..7d43506c703 100644 --- a/drivers/net/irda/w83977af_ir.c +++ b/drivers/net/irda/w83977af_ir.c @@ -677,7 +677,7 @@ static void w83977af_dma_xmit_complete(struct w83977af_ir *self) switch_bank(iobase, SET0); outb(inb(iobase+HCR) & ~HCR_EN_DMA, iobase+HCR); - /* Check for underrrun! */ + /* Check for underrun! */ if (inb(iobase+AUDR) & AUDR_UNDR) { IRDA_DEBUG(0, "%s(), Transmit underrun!\n", __func__ ); diff --git a/drivers/net/wimax/i2400m/i2400m.h b/drivers/net/wimax/i2400m/i2400m.h index c421a614185..c806d455021 100644 --- a/drivers/net/wimax/i2400m/i2400m.h +++ b/drivers/net/wimax/i2400m/i2400m.h @@ -75,7 +75,7 @@ * device is up and running or shutdown (through ifconfig up / * down). Bus-generic only. * - * - control ops: control.c - implements various commmands for + * - control ops: control.c - implements various commands for * controlling the device. bus-generic only. * * - device model glue: driver.c - implements helpers for the diff --git a/drivers/net/wireless/rtlwifi/rtl8192de/hw.c b/drivers/net/wireless/rtlwifi/rtl8192de/hw.c index f5bd3a3cd34..9d89d7ccdaf 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192de/hw.c +++ b/drivers/net/wireless/rtlwifi/rtl8192de/hw.c @@ -466,8 +466,8 @@ void rtl92de_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val) bool int_migration = *(bool *) (val); if (int_migration) { - /* Set interrrupt migration timer and - * corresponging Tx/Rx counter. + /* Set interrupt migration timer and + * corresponding Tx/Rx counter. * timer 25ns*0xfa0=100us for 0xf packets. * 0x306:Rx, 0x307:Tx */ rtl_write_dword(rtlpriv, REG_INT_MIG, 0xfe000fa0); diff --git a/drivers/parport/parport_mfc3.c b/drivers/parport/parport_mfc3.c index 362db31d8ca..1c0c642b3e2 100644 --- a/drivers/parport/parport_mfc3.c +++ b/drivers/parport/parport_mfc3.c @@ -397,7 +397,7 @@ static void __exit parport_mfc3_exit(void) MODULE_AUTHOR("Joerg Dorchain <joerg@dorchain.net>"); -MODULE_DESCRIPTION("Parport Driver for Multiface 3 expansion cards Paralllel Port"); +MODULE_DESCRIPTION("Parport Driver for Multiface 3 expansion cards Parallel Port"); MODULE_SUPPORTED_DEVICE("Multiface 3 Parallel Port"); MODULE_LICENSE("GPL"); diff --git a/drivers/scsi/aic7xxx/aicasm/aicasm.c b/drivers/scsi/aic7xxx/aicasm/aicasm.c index e4a77872030..2e3117aa382 100644 --- a/drivers/scsi/aic7xxx/aicasm/aicasm.c +++ b/drivers/scsi/aic7xxx/aicasm/aicasm.c @@ -1,5 +1,5 @@ /* - * Aic7xxx SCSI host adapter firmware asssembler + * Aic7xxx SCSI host adapter firmware assembler * * Copyright (c) 1997, 1998, 2000, 2001 Justin T. Gibbs. * Copyright (c) 2001, 2002 Adaptec Inc. diff --git a/drivers/scsi/ips.c b/drivers/scsi/ips.c index 218f71a8726..d77891e5683 100644 --- a/drivers/scsi/ips.c +++ b/drivers/scsi/ips.c @@ -4494,7 +4494,7 @@ ips_init_scb(ips_ha_t * ha, ips_scb_t * scb) /* */ /* Initialize a CCB to default values */ /* */ -/* ASSUMED to be callled from within a lock */ +/* ASSUMED to be called from within a lock */ /* */ /****************************************************************************/ static ips_scb_t * diff --git a/drivers/scsi/qla4xxx/ql4_fw.h b/drivers/scsi/qla4xxx/ql4_fw.h index cbd5a20dbbd..866af45b3d6 100644 --- a/drivers/scsi/qla4xxx/ql4_fw.h +++ b/drivers/scsi/qla4xxx/ql4_fw.h @@ -744,7 +744,7 @@ struct dev_db_entry { uint8_t res4[0x36]; /* 8A-BF */ uint8_t iscsi_name[0xE0]; /* C0-19F : xxzzy Make this a * pointer to a string so we - * don't have to reserve soooo + * don't have to reserve so * much RAM */ uint8_t link_local_ipv6_addr[0x10]; /* 1A0-1AF */ uint8_t res5[0x10]; /* 1B0-1BF */ diff --git a/drivers/scsi/vmw_pvscsi.c b/drivers/scsi/vmw_pvscsi.c index a18996d2446..7264116185d 100644 --- a/drivers/scsi/vmw_pvscsi.c +++ b/drivers/scsi/vmw_pvscsi.c @@ -1144,7 +1144,7 @@ static void pvscsi_release_resources(struct pvscsi_adapter *adapter) * * These are statically allocated. Trying to be clever was not worth it. * - * Dynamic allocation can fail, and we can't go deeep into the memory + * Dynamic allocation can fail, and we can't go deep into the memory * allocator, since we're a SCSI driver, and trying too hard to allocate * memory might generate disk I/O. We also don't want to fail disk I/O * in that case because we can't get an allocation - the I/O could be diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.c index c75a1a1fd77..f9545b064ea 100644 --- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.c +++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.c @@ -3598,7 +3598,7 @@ int i_APCI3200_InterruptHandleEos(struct comedi_device *dev) n = comedi_buf_write_alloc(s->async, (7 + 12) * sizeof(unsigned int)); - /* If not enougth memory available, event is set to Comedi Buffer Errror */ + /* If not enough memory available, event is set to Comedi Buffer Error */ if (n > ((7 + 12) * sizeof(unsigned int))) { printk("\ncomedi_buf_write_alloc n = %i", n); s->async->events |= COMEDI_CB_ERROR; diff --git a/drivers/staging/cxt1e1/libsbew.h b/drivers/staging/cxt1e1/libsbew.h index 5c99646cd10..ae8f06d05be 100644 --- a/drivers/staging/cxt1e1/libsbew.h +++ b/drivers/staging/cxt1e1/libsbew.h @@ -323,7 +323,7 @@ struct sbecom_port_param #define CFG_CH_DINV_TX 0x02 -/* Posssible resettable chipsets/functions */ +/* Possible resettable chipsets/functions */ #define RESET_DEV_TEMUX 1 #define RESET_DEV_TECT3 RESET_DEV_TEMUX #define RESET_DEV_PLL 2 diff --git a/drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c b/drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c index b3d743a3d30..917bbb082a6 100644 --- a/drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c +++ b/drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c @@ -344,10 +344,10 @@ static void ft1000_reset_asic(struct net_device *dev) } mdelay(1); if (info->AsicID == ELECTRABUZZ_ID) { - // set watermark to -1 in order to not generate an interrrupt + // set watermark to -1 in order to not generate an interrupt ft1000_write_reg(dev, FT1000_REG_WATERMARK, 0xffff); } else { - // set watermark to -1 in order to not generate an interrrupt + // set watermark to -1 in order to not generate an interrupt ft1000_write_reg(dev, FT1000_REG_MAG_WATERMARK, 0xffff); } // clear interrupts diff --git a/drivers/staging/ft1000/ft1000-usb/ft1000_hw.c b/drivers/staging/ft1000/ft1000-usb/ft1000_hw.c index aaf44c35982..43b1d363107 100644 --- a/drivers/staging/ft1000/ft1000-usb/ft1000_hw.c +++ b/drivers/staging/ft1000/ft1000-usb/ft1000_hw.c @@ -601,7 +601,7 @@ static void ft1000_reset_asic(struct net_device *dev) mdelay(1); - /* set watermark to -1 in order to not generate an interrrupt */ + /* set watermark to -1 in order to not generate an interrupt */ ft1000_write_register(ft1000dev, 0xffff, FT1000_REG_MAG_WATERMARK); /* clear interrupts */ diff --git a/drivers/staging/iio/industrialio-trigger.c b/drivers/staging/iio/industrialio-trigger.c index 2c626e0cb29..68a4d4e8c63 100644 --- a/drivers/staging/iio/industrialio-trigger.c +++ b/drivers/staging/iio/industrialio-trigger.c @@ -295,7 +295,7 @@ void iio_dealloc_pollfunc(struct iio_poll_func *pf) EXPORT_SYMBOL_GPL(iio_dealloc_pollfunc); /** - * iio_trigger_read_currrent() - trigger consumer sysfs query which trigger + * iio_trigger_read_current() - trigger consumer sysfs query which trigger * * For trigger consumers the current_trigger interface allows the trigger * used by the device to be queried. diff --git a/drivers/staging/sep/sep_driver.c b/drivers/staging/sep/sep_driver.c index 8ac3faea2d2..f47571ea745 100644 --- a/drivers/staging/sep/sep_driver.c +++ b/drivers/staging/sep/sep_driver.c @@ -1235,7 +1235,7 @@ static void sep_build_lli_table(struct sep_device *sep, /* Counter of lli array entry */ u32 array_counter; - /* Init currrent table data size and lli array entry counter */ + /* Init current table data size and lli array entry counter */ curr_table_data_size = 0; array_counter = 0; *num_table_entries_ptr = 1; diff --git a/drivers/staging/tidspbridge/Kconfig b/drivers/staging/tidspbridge/Kconfig index 93de4f2e8bf..21a559ecbbb 100644 --- a/drivers/staging/tidspbridge/Kconfig +++ b/drivers/staging/tidspbridge/Kconfig @@ -78,7 +78,7 @@ config TIDSPBRIDGE_NTFY_PWRERR bool "Notify power errors" depends on TIDSPBRIDGE help - Enable notifications to registered clients on the event of power errror + Enable notifications to registered clients on the event of power error trying to suspend bridge driver. Say Y, to signal this event as a fatal error, this will require a bridge restart to recover. diff --git a/drivers/staging/tidspbridge/rmgr/dbdcd.c b/drivers/staging/tidspbridge/rmgr/dbdcd.c index a7e407e2518..fda240214cd 100644 --- a/drivers/staging/tidspbridge/rmgr/dbdcd.c +++ b/drivers/staging/tidspbridge/rmgr/dbdcd.c @@ -285,7 +285,7 @@ int dcd_enumerate_object(s32 index, enum dsp_dcdobjtype obj_type, enum_refs = 0; /* - * TODO: Revisit, this is not an errror case but code + * TODO: Revisit, this is not an error case but code * expects non-zero value. */ status = ENODATA; diff --git a/drivers/usb/host/hwa-hc.c b/drivers/usb/host/hwa-hc.c index 9bfac657572..b5c56a99da0 100644 --- a/drivers/usb/host/hwa-hc.c +++ b/drivers/usb/host/hwa-hc.c @@ -481,7 +481,7 @@ static int __hwahc_op_set_ptk(struct wusbhc *wusbhc, u8 port_idx, u32 tkid, encryption_value = 0; } - /* Set the encryption type for commmunicating with the device */ + /* Set the encryption type for communicating with the device */ result = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), USB_REQ_SET_ENCRYPTION, USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, diff --git a/drivers/usb/host/imx21-hcd.c b/drivers/usb/host/imx21-hcd.c index 2ee18cfa1ef..dbf0f156ed9 100644 --- a/drivers/usb/host/imx21-hcd.c +++ b/drivers/usb/host/imx21-hcd.c @@ -473,7 +473,7 @@ static void free_epdmem(struct imx21 *imx21, struct usb_host_endpoint *ep) /* End handling */ /* =========================================== */ -/* Endpoint now idle - release it's ETD(s) or asssign to queued request */ +/* Endpoint now idle - release its ETD(s) or assign to queued request */ static void ep_idle(struct imx21 *imx21, struct ep_priv *ep_priv) { int i; diff --git a/drivers/usb/otg/fsl_otg.c b/drivers/usb/otg/fsl_otg.c index 0f420b25e9a..2d9cc445fc7 100644 --- a/drivers/usb/otg/fsl_otg.c +++ b/drivers/usb/otg/fsl_otg.c @@ -639,7 +639,7 @@ static int fsl_otg_set_power(struct otg_transceiver *otg_p, unsigned mA) * Delayed pin detect interrupt processing. * * When the Mini-A cable is disconnected from the board, - * the pin-detect interrupt happens before the disconnnect + * the pin-detect interrupt happens before the disconnect * interrupts for the connected device(s). In order to * process the disconnect interrupt(s) prior to switching * roles, the pin-detect interrupts are delayed, and handled diff --git a/drivers/uwb/i1480/dfu/usb.c b/drivers/uwb/i1480/dfu/usb.c index ba8664328af..a315d4d25cc 100644 --- a/drivers/uwb/i1480/dfu/usb.c +++ b/drivers/uwb/i1480/dfu/usb.c @@ -104,7 +104,7 @@ void i1480_usb_destroy(struct i1480_usb *i1480_usb) * * Data buffers to USB cannot be on the stack or in vmalloc'ed areas, * so we copy it to the local i1480 buffer before proceeding. In any - * case, we have a max size we can send, soooo. + * case, we have a max size we can send. */ static int i1480_usb_write(struct i1480 *i1480, u32 memory_address, |