diff options
Diffstat (limited to 'drivers')
36 files changed, 3064 insertions, 1271 deletions
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index 2701235d575..a96bda3d3b8 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -19,6 +19,7 @@ endif obj-$(CONFIG_MACH_LOONGSON1) += clk-ls1x.o obj-$(CONFIG_ARCH_U8500) += ux500/ obj-$(CONFIG_ARCH_VT8500) += clk-vt8500.o +obj-$(CONFIG_ARCH_SUNXI) += clk-sunxi.o # Chip specific obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o diff --git a/drivers/clk/clk-sunxi.c b/drivers/clk/clk-sunxi.c new file mode 100644 index 00000000000..0e831b584ba --- /dev/null +++ b/drivers/clk/clk-sunxi.c @@ -0,0 +1,30 @@ +/* + * Copyright 2012 Maxime Ripard + * + * Maxime Ripard <maxime.ripard@free-electrons.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/clk-provider.h> +#include <linux/clkdev.h> +#include <linux/clk/sunxi.h> +#include <linux/of.h> + +static const __initconst struct of_device_id clk_match[] = { + { .compatible = "fixed-clock", .data = of_fixed_clk_setup, }, + {} +}; + +void __init sunxi_init_clocks(void) +{ + of_clk_init(clk_match); +} diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig index 6a78073c380..a0985732f1e 100644 --- a/drivers/clocksource/Kconfig +++ b/drivers/clocksource/Kconfig @@ -22,6 +22,9 @@ config DW_APB_TIMER_OF config ARMADA_370_XP_TIMER bool +config SUNXI_TIMER + bool + config CLKSRC_DBX500_PRCMU bool "Clocksource PRCMU Timer" depends on UX500_SOC_DB8500 diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile index 603be366f76..36f06de4c5a 100644 --- a/drivers/clocksource/Makefile +++ b/drivers/clocksource/Makefile @@ -14,5 +14,6 @@ obj-$(CONFIG_DW_APB_TIMER_OF) += dw_apb_timer_of.o obj-$(CONFIG_CLKSRC_DBX500_PRCMU) += clksrc-dbx500-prcmu.o obj-$(CONFIG_ARMADA_370_XP_TIMER) += time-armada-370-xp.o obj-$(CONFIG_ARCH_BCM2835) += bcm2835_timer.o +obj-$(CONFIG_SUNXI_TIMER) += sunxi_timer.o obj-$(CONFIG_CLKSRC_ARM_GENERIC) += arm_generic.o diff --git a/drivers/clocksource/sunxi_timer.c b/drivers/clocksource/sunxi_timer.c new file mode 100644 index 00000000000..3cd1bd3d7ae --- /dev/null +++ b/drivers/clocksource/sunxi_timer.c @@ -0,0 +1,171 @@ +/* + * Allwinner A1X SoCs timer handling. + * + * Copyright (C) 2012 Maxime Ripard + * + * Maxime Ripard <maxime.ripard@free-electrons.com> + * + * Based on code from + * Allwinner Technology Co., Ltd. <www.allwinnertech.com> + * Benn Huang <benn@allwinnertech.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/clk.h> +#include <linux/clockchips.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/irqreturn.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/sunxi_timer.h> +#include <linux/clk/sunxi.h> + +#define TIMER_CTL_REG 0x00 +#define TIMER_CTL_ENABLE (1 << 0) +#define TIMER_IRQ_ST_REG 0x04 +#define TIMER0_CTL_REG 0x10 +#define TIMER0_CTL_ENABLE (1 << 0) +#define TIMER0_CTL_AUTORELOAD (1 << 1) +#define TIMER0_CTL_ONESHOT (1 << 7) +#define TIMER0_INTVAL_REG 0x14 +#define TIMER0_CNTVAL_REG 0x18 + +#define TIMER_SCAL 16 + +static void __iomem *timer_base; + +static void sunxi_clkevt_mode(enum clock_event_mode mode, + struct clock_event_device *clk) +{ + u32 u = readl(timer_base + TIMER0_CTL_REG); + + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + u &= ~(TIMER0_CTL_ONESHOT); + writel(u | TIMER0_CTL_ENABLE, timer_base + TIMER0_CTL_REG); + break; + + case CLOCK_EVT_MODE_ONESHOT: + writel(u | TIMER0_CTL_ONESHOT, timer_base + TIMER0_CTL_REG); + break; + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_SHUTDOWN: + default: + writel(u & ~(TIMER0_CTL_ENABLE), timer_base + TIMER0_CTL_REG); + break; + } +} + +static int sunxi_clkevt_next_event(unsigned long evt, + struct clock_event_device *unused) +{ + u32 u = readl(timer_base + TIMER0_CTL_REG); + writel(evt, timer_base + TIMER0_CNTVAL_REG); + writel(u | TIMER0_CTL_ENABLE | TIMER0_CTL_AUTORELOAD, + timer_base + TIMER0_CTL_REG); + + return 0; +} + +static struct clock_event_device sunxi_clockevent = { + .name = "sunxi_tick", + .shift = 32, + .rating = 300, + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, + .set_mode = sunxi_clkevt_mode, + .set_next_event = sunxi_clkevt_next_event, +}; + + +static irqreturn_t sunxi_timer_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *evt = (struct clock_event_device *)dev_id; + + writel(0x1, timer_base + TIMER_IRQ_ST_REG); + evt->event_handler(evt); + + return IRQ_HANDLED; +} + +static struct irqaction sunxi_timer_irq = { + .name = "sunxi_timer0", + .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, + .handler = sunxi_timer_interrupt, + .dev_id = &sunxi_clockevent, +}; + +static struct of_device_id sunxi_timer_dt_ids[] = { + { .compatible = "allwinner,sunxi-timer" }, + { } +}; + +static void __init sunxi_timer_init(void) +{ + struct device_node *node; + unsigned long rate = 0; + struct clk *clk; + int ret, irq; + u32 val; + + node = of_find_matching_node(NULL, sunxi_timer_dt_ids); + if (!node) + panic("No sunxi timer node"); + + timer_base = of_iomap(node, 0); + if (!timer_base) + panic("Can't map registers"); + + irq = irq_of_parse_and_map(node, 0); + if (irq <= 0) + panic("Can't parse IRQ"); + + sunxi_init_clocks(); + + clk = of_clk_get(node, 0); + if (IS_ERR(clk)) + panic("Can't get timer clock"); + + rate = clk_get_rate(clk); + + writel(rate / (TIMER_SCAL * HZ), + timer_base + TIMER0_INTVAL_REG); + + /* set clock source to HOSC, 16 pre-division */ + val = readl(timer_base + TIMER0_CTL_REG); + val &= ~(0x07 << 4); + val &= ~(0x03 << 2); + val |= (4 << 4) | (1 << 2); + writel(val, timer_base + TIMER0_CTL_REG); + + /* set mode to auto reload */ + val = readl(timer_base + TIMER0_CTL_REG); + writel(val | TIMER0_CTL_AUTORELOAD, timer_base + TIMER0_CTL_REG); + + ret = setup_irq(irq, &sunxi_timer_irq); + if (ret) + pr_warn("failed to setup irq %d\n", irq); + + /* Enable timer0 interrupt */ + val = readl(timer_base + TIMER_CTL_REG); + writel(val | TIMER_CTL_ENABLE, timer_base + TIMER_CTL_REG); + + sunxi_clockevent.mult = div_sc(rate / TIMER_SCAL, + NSEC_PER_SEC, + sunxi_clockevent.shift); + sunxi_clockevent.max_delta_ns = clockevent_delta2ns(0xff, + &sunxi_clockevent); + sunxi_clockevent.min_delta_ns = clockevent_delta2ns(0x1, + &sunxi_clockevent); + sunxi_clockevent.cpumask = cpumask_of(0); + + clockevents_register_device(&sunxi_clockevent); +} + +struct sys_timer sunxi_timer = { + .init = sunxi_timer_init, +}; diff --git a/drivers/cpuidle/Kconfig b/drivers/cpuidle/Kconfig index 234ae651b38..c4cc27e5c8a 100644 --- a/drivers/cpuidle/Kconfig +++ b/drivers/cpuidle/Kconfig @@ -30,3 +30,13 @@ config CPU_IDLE_GOV_MENU config ARCH_NEEDS_CPU_IDLE_COUPLED def_bool n + +if CPU_IDLE + +config CPU_IDLE_CALXEDA + bool "CPU Idle Driver for Calxeda processors" + depends on ARCH_HIGHBANK + help + Select this to enable cpuidle on Calxeda processors. + +endif diff --git a/drivers/cpuidle/Makefile b/drivers/cpuidle/Makefile index 38c8f69f30c..03ee87482c7 100644 --- a/drivers/cpuidle/Makefile +++ b/drivers/cpuidle/Makefile @@ -4,3 +4,5 @@ obj-y += cpuidle.o driver.o governor.o sysfs.o governors/ obj-$(CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED) += coupled.o + +obj-$(CONFIG_CPU_IDLE_CALXEDA) += cpuidle-calxeda.o diff --git a/drivers/cpuidle/cpuidle-calxeda.c b/drivers/cpuidle/cpuidle-calxeda.c new file mode 100644 index 00000000000..e1aab38c5a8 --- /dev/null +++ b/drivers/cpuidle/cpuidle-calxeda.c @@ -0,0 +1,161 @@ +/* + * Copyright 2012 Calxeda, Inc. + * + * Based on arch/arm/plat-mxc/cpuidle.c: + * Copyright 2012 Freescale Semiconductor, Inc. + * Copyright 2012 Linaro Ltd. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/cpuidle.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/time.h> +#include <linux/delay.h> +#include <linux/suspend.h> +#include <asm/cpuidle.h> +#include <asm/proc-fns.h> +#include <asm/smp_scu.h> +#include <asm/suspend.h> +#include <asm/cacheflush.h> +#include <asm/cp15.h> + +extern void highbank_set_cpu_jump(int cpu, void *jump_addr); +extern void *scu_base_addr; + +static struct cpuidle_device __percpu *calxeda_idle_cpuidle_devices; + +static inline unsigned int get_auxcr(void) +{ + unsigned int val; + asm("mrc p15, 0, %0, c1, c0, 1 @ get AUXCR" : "=r" (val) : : "cc"); + return val; +} + +static inline void set_auxcr(unsigned int val) +{ + asm volatile("mcr p15, 0, %0, c1, c0, 1 @ set AUXCR" + : : "r" (val) : "cc"); + isb(); +} + +static noinline void calxeda_idle_restore(void) +{ + set_cr(get_cr() | CR_C); + set_auxcr(get_auxcr() | 0x40); + scu_power_mode(scu_base_addr, SCU_PM_NORMAL); +} + +static int calxeda_idle_finish(unsigned long val) +{ + /* Already flushed cache, but do it again as the outer cache functions + * dirty the cache with spinlocks */ + flush_cache_all(); + + set_auxcr(get_auxcr() & ~0x40); + set_cr(get_cr() & ~CR_C); + + scu_power_mode(scu_base_addr, SCU_PM_DORMANT); + + cpu_do_idle(); + + /* Restore things if we didn't enter power-gating */ + calxeda_idle_restore(); + return 1; +} + +static int calxeda_pwrdown_idle(struct cpuidle_device *dev, + struct cpuidle_driver *drv, + int index) +{ + highbank_set_cpu_jump(smp_processor_id(), cpu_resume); + cpu_suspend(0, calxeda_idle_finish); + return index; +} + +static void calxeda_idle_cpuidle_devices_uninit(void) +{ + int i; + struct cpuidle_device *dev; + + for_each_possible_cpu(i) { + dev = per_cpu_ptr(calxeda_idle_cpuidle_devices, i); + cpuidle_unregister_device(dev); + } + + free_percpu(calxeda_idle_cpuidle_devices); +} + +static struct cpuidle_driver calxeda_idle_driver = { + .name = "calxeda_idle", + .en_core_tk_irqen = 1, + .states = { + ARM_CPUIDLE_WFI_STATE, + { + .name = "PG", + .desc = "Power Gate", + .flags = CPUIDLE_FLAG_TIME_VALID, + .exit_latency = 30, + .power_usage = 50, + .target_residency = 200, + .enter = calxeda_pwrdown_idle, + }, + }, + .state_count = 2, +}; + +static int __init calxeda_cpuidle_init(void) +{ + int cpu_id; + int ret; + struct cpuidle_device *dev; + struct cpuidle_driver *drv = &calxeda_idle_driver; + + if (!of_machine_is_compatible("calxeda,highbank")) + return -ENODEV; + + ret = cpuidle_register_driver(drv); + if (ret) + return ret; + + calxeda_idle_cpuidle_devices = alloc_percpu(struct cpuidle_device); + if (calxeda_idle_cpuidle_devices == NULL) { + ret = -ENOMEM; + goto unregister_drv; + } + + /* initialize state data for each cpuidle_device */ + for_each_possible_cpu(cpu_id) { + dev = per_cpu_ptr(calxeda_idle_cpuidle_devices, cpu_id); + dev->cpu = cpu_id; + dev->state_count = drv->state_count; + + ret = cpuidle_register_device(dev); + if (ret) { + pr_err("Failed to register cpu %u, error: %d\n", + cpu_id, ret); + goto uninit; + } + } + + return 0; + +uninit: + calxeda_idle_cpuidle_devices_uninit(); +unregister_drv: + cpuidle_unregister_driver(drv); + return ret; +} +module_init(calxeda_cpuidle_init); diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig index 1bb8bf6d7fd..62ca575701d 100644 --- a/drivers/irqchip/Kconfig +++ b/drivers/irqchip/Kconfig @@ -1 +1,8 @@ -# empty +config VERSATILE_FPGA_IRQ + bool + select IRQ_DOMAIN + +config VERSATILE_FPGA_IRQ_NR + int + default 4 + depends on VERSATILE_FPGA_IRQ diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile index 054321db435..02bd37a6187 100644 --- a/drivers/irqchip/Makefile +++ b/drivers/irqchip/Makefile @@ -1 +1,3 @@ obj-$(CONFIG_ARCH_BCM2835) += irq-bcm2835.o +obj-$(CONFIG_ARCH_SUNXI) += irq-sunxi.o +obj-$(CONFIG_VERSATILE_FPGA_IRQ) += irq-versatile-fpga.o diff --git a/drivers/irqchip/irq-sunxi.c b/drivers/irqchip/irq-sunxi.c new file mode 100644 index 00000000000..10974fa4265 --- /dev/null +++ b/drivers/irqchip/irq-sunxi.c @@ -0,0 +1,151 @@ +/* + * Allwinner A1X SoCs IRQ chip driver. + * + * Copyright (C) 2012 Maxime Ripard + * + * Maxime Ripard <maxime.ripard@free-electrons.com> + * + * Based on code from + * Allwinner Technology Co., Ltd. <www.allwinnertech.com> + * Benn Huang <benn@allwinnertech.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> + +#include <linux/irqchip/sunxi.h> + +#define SUNXI_IRQ_VECTOR_REG 0x00 +#define SUNXI_IRQ_PROTECTION_REG 0x08 +#define SUNXI_IRQ_NMI_CTRL_REG 0x0c +#define SUNXI_IRQ_PENDING_REG(x) (0x10 + 0x4 * x) +#define SUNXI_IRQ_FIQ_PENDING_REG(x) (0x20 + 0x4 * x) +#define SUNXI_IRQ_ENABLE_REG(x) (0x40 + 0x4 * x) +#define SUNXI_IRQ_MASK_REG(x) (0x50 + 0x4 * x) + +static void __iomem *sunxi_irq_base; +static struct irq_domain *sunxi_irq_domain; + +void sunxi_irq_ack(struct irq_data *irqd) +{ + unsigned int irq = irqd_to_hwirq(irqd); + unsigned int irq_off = irq % 32; + int reg = irq / 32; + u32 val; + + val = readl(sunxi_irq_base + SUNXI_IRQ_PENDING_REG(reg)); + writel(val | (1 << irq_off), + sunxi_irq_base + SUNXI_IRQ_PENDING_REG(reg)); +} + +static void sunxi_irq_mask(struct irq_data *irqd) +{ + unsigned int irq = irqd_to_hwirq(irqd); + unsigned int irq_off = irq % 32; + int reg = irq / 32; + u32 val; + + val = readl(sunxi_irq_base + SUNXI_IRQ_ENABLE_REG(reg)); + writel(val & ~(1 << irq_off), + sunxi_irq_base + SUNXI_IRQ_ENABLE_REG(reg)); +} + +static void sunxi_irq_unmask(struct irq_data *irqd) +{ + unsigned int irq = irqd_to_hwirq(irqd); + unsigned int irq_off = irq % 32; + int reg = irq / 32; + u32 val; + + val = readl(sunxi_irq_base + SUNXI_IRQ_ENABLE_REG(reg)); + writel(val | (1 << irq_off), + sunxi_irq_base + SUNXI_IRQ_ENABLE_REG(reg)); +} + +static struct irq_chip sunxi_irq_chip = { + .name = "sunxi_irq", + .irq_ack = sunxi_irq_ack, + .irq_mask = sunxi_irq_mask, + .irq_unmask = sunxi_irq_unmask, +}; + +static int sunxi_irq_map(struct irq_domain *d, unsigned int virq, + irq_hw_number_t hw) +{ + irq_set_chip_and_handler(virq, &sunxi_irq_chip, + handle_level_irq); + set_irq_flags(virq, IRQF_VALID | IRQF_PROBE); + + return 0; +} + +static struct irq_domain_ops sunxi_irq_ops = { + .map = sunxi_irq_map, + .xlate = irq_domain_xlate_onecell, +}; + +static int __init sunxi_of_init(struct device_node *node, + struct device_node *parent) +{ + sunxi_irq_base = of_iomap(node, 0); + if (!sunxi_irq_base) + panic("%s: unable to map IC registers\n", + node->full_name); + + /* Disable all interrupts */ + writel(0, sunxi_irq_base + SUNXI_IRQ_ENABLE_REG(0)); + writel(0, sunxi_irq_base + SUNXI_IRQ_ENABLE_REG(1)); + writel(0, sunxi_irq_base + SUNXI_IRQ_ENABLE_REG(2)); + + /* Mask all the interrupts */ + writel(0, sunxi_irq_base + SUNXI_IRQ_MASK_REG(0)); + writel(0, sunxi_irq_base + SUNXI_IRQ_MASK_REG(1)); + writel(0, sunxi_irq_base + SUNXI_IRQ_MASK_REG(2)); + + /* Clear all the pending interrupts */ + writel(0xffffffff, sunxi_irq_base + SUNXI_IRQ_PENDING_REG(0)); + writel(0xffffffff, sunxi_irq_base + SUNXI_IRQ_PENDING_REG(1)); + writel(0xffffffff, sunxi_irq_base + SUNXI_IRQ_PENDING_REG(2)); + + /* Enable protection mode */ + writel(0x01, sunxi_irq_base + SUNXI_IRQ_PROTECTION_REG); + + /* Configure the external interrupt source type */ + writel(0x00, sunxi_irq_base + SUNXI_IRQ_NMI_CTRL_REG); + + sunxi_irq_domain = irq_domain_add_linear(node, 3 * 32, + &sunxi_irq_ops, NULL); + if (!sunxi_irq_domain) + panic("%s: unable to create IRQ domain\n", node->full_name); + + return 0; +} + +static struct of_device_id sunxi_irq_dt_ids[] __initconst = { + { .compatible = "allwinner,sunxi-ic", .data = sunxi_of_init }, + { } +}; + +void __init sunxi_init_irq(void) +{ + of_irq_init(sunxi_irq_dt_ids); +} + +asmlinkage void __exception_irq_entry sunxi_handle_irq(struct pt_regs *regs) +{ + u32 irq, hwirq; + + hwirq = readl(sunxi_irq_base + SUNXI_IRQ_VECTOR_REG) >> 2; + while (hwirq != 0) { + irq = irq_find_mapping(sunxi_irq_domain, hwirq); + handle_IRQ(irq, regs); + hwirq = readl(sunxi_irq_base + SUNXI_IRQ_VECTOR_REG) >> 2; + } +} diff --git a/drivers/irqchip/irq-versatile-fpga.c b/drivers/irqchip/irq-versatile-fpga.c new file mode 100644 index 00000000000..9dbd82b716d --- /dev/null +++ b/drivers/irqchip/irq-versatile-fpga.c @@ -0,0 +1,203 @@ +/* + * Support for Versatile FPGA-based IRQ controllers + */ +#include <linux/bitops.h> +#include <linux/irq.h> +#include <linux/io.h> +#include <linux/irqchip/versatile-fpga.h> +#include <linux/irqdomain.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_address.h> + +#include <asm/exception.h> +#include <asm/mach/irq.h> + +#define IRQ_STATUS 0x00 +#define IRQ_RAW_STATUS 0x04 +#define IRQ_ENABLE_SET 0x08 +#define IRQ_ENABLE_CLEAR 0x0c +#define INT_SOFT_SET 0x10 +#define INT_SOFT_CLEAR 0x14 +#define FIQ_STATUS 0x20 +#define FIQ_RAW_STATUS 0x24 +#define FIQ_ENABLE 0x28 +#define FIQ_ENABLE_SET 0x28 +#define FIQ_ENABLE_CLEAR 0x2C + +/** + * struct fpga_irq_data - irq data container for the FPGA IRQ controller + * @base: memory offset in virtual memory + * @chip: chip container for this instance + * @domain: IRQ domain for this instance + * @valid: mask for valid IRQs on this controller + * @used_irqs: number of active IRQs on this controller + */ +struct fpga_irq_data { + void __iomem *base; + struct irq_chip chip; + u32 valid; + struct irq_domain *domain; + u8 used_irqs; +}; + +/* we cannot allocate memory when the controllers are initially registered */ +static struct fpga_irq_data fpga_irq_devices[CONFIG_VERSATILE_FPGA_IRQ_NR]; +static int fpga_irq_id; + +static void fpga_irq_mask(struct irq_data *d) +{ + struct fpga_irq_data *f = irq_data_get_irq_chip_data(d); + u32 mask = 1 << d->hwirq; + + writel(mask, f->base + IRQ_ENABLE_CLEAR); +} + +static void fpga_irq_unmask(struct irq_data *d) +{ + struct fpga_irq_data *f = irq_data_get_irq_chip_data(d); + u32 mask = 1 << d->hwirq; + + writel(mask, f->base + IRQ_ENABLE_SET); +} + +static void fpga_irq_handle(unsigned int irq, struct irq_desc *desc) +{ + struct fpga_irq_data *f = irq_desc_get_handler_data(desc); + u32 status = readl(f->base + IRQ_STATUS); + + if (status == 0) { + do_bad_IRQ(irq, desc); + return; + } + + do { + irq = ffs(status) - 1; + status &= ~(1 << irq); + generic_handle_irq(irq_find_mapping(f->domain, irq)); + } while (status); +} + +/* + * Handle each interrupt in a single FPGA IRQ controller. Returns non-zero + * if we've handled at least one interrupt. This does a single read of the + * status register and handles all interrupts in order from LSB first. + */ +static int handle_one_fpga(struct fpga_irq_data *f, struct pt_regs *regs) +{ + int handled = 0; + int irq; + u32 status; + + while ((status = readl(f->base + IRQ_STATUS))) { + irq = ffs(status) - 1; + handle_IRQ(irq_find_mapping(f->domain, irq), regs); + handled = 1; + } + + return handled; +} + +/* + * Keep iterating over all registered FPGA IRQ controllers until there are + * no pending interrupts. + */ +asmlinkage void __exception_irq_entry fpga_handle_irq(struct pt_regs *regs) +{ + int i, handled; + + do { + for (i = 0, handled = 0; i < fpga_irq_id; ++i) + handled |= handle_one_fpga(&fpga_irq_devices[i], regs); + } while (handled); +} + +static int fpga_irqdomain_map(struct irq_domain *d, unsigned int irq, + irq_hw_number_t hwirq) +{ + struct fpga_irq_data *f = d->host_data; + + /* Skip invalid IRQs, only register handlers for the real ones */ + if (!(f->valid & BIT(hwirq))) + return -ENOTSUPP; + irq_set_chip_data(irq, f); + irq_set_chip_and_handler(irq, &f->chip, + handle_level_irq); + set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); + return 0; +} + +static struct irq_domain_ops fpga_irqdomain_ops = { + .map = fpga_irqdomain_map, + .xlate = irq_domain_xlate_onetwocell, +}; + +void __init fpga_irq_init(void __iomem *base, const char *name, int irq_start, + int parent_irq, u32 valid, struct device_node *node) +{ + struct fpga_irq_data *f; + int i; + + if (fpga_irq_id >= ARRAY_SIZE(fpga_irq_devices)) { + pr_err("%s: too few FPGA IRQ controllers, increase CONFIG_PLAT_VERSATILE_FPGA_IRQ_NR\n", __func__); + return; + } + f = &fpga_irq_devices[fpga_irq_id]; + f->base = base; + f->chip.name = name; + f->chip.irq_ack = fpga_irq_mask; + f->chip.irq_mask = fpga_irq_mask; + f->chip.irq_unmask = fpga_irq_unmask; + f->valid = valid; + + if (parent_irq != -1) { + irq_set_handler_data(parent_irq, f); + irq_set_chained_handler(parent_irq, fpga_irq_handle); + } + + /* This will also allocate irq descriptors */ + f->domain = irq_domain_add_simple(node, fls(valid), irq_start, + &fpga_irqdomain_ops, f); + + /* This will allocate all valid descriptors in the linear case */ + for (i = 0; i < fls(valid); i++) + if (valid & BIT(i)) { + if (!irq_start) + irq_create_mapping(f->domain, i); + f->used_irqs++; + } + + pr_info("FPGA IRQ chip %d \"%s\" @ %p, %u irqs\n", + fpga_irq_id, name, base, f->used_irqs); + + fpga_irq_id++; +} + +#ifdef CONFIG_OF +int __init fpga_irq_of_init(struct device_node *node, + struct device_node *parent) +{ + void __iomem *base; + u32 clear_mask; + u32 valid_mask; + + if (WARN_ON(!node)) + return -ENODEV; + + base = of_iomap(node, 0); + WARN(!base, "unable to map fpga irq registers\n"); + + if (of_property_read_u32(node, "clear-mask", &clear_mask)) + clear_mask = 0; + + if (of_property_read_u32(node, "valid-mask", &valid_mask)) + valid_mask = 0; + + fpga_irq_init(base, node->name, 0, -1, valid_mask, node); + + writel(clear_mask, base + IRQ_ENABLE_CLEAR); + writel(clear_mask, base + FIQ_ENABLE_CLEAR); + + return 0; +} +#endif diff --git a/drivers/media/platform/soc_camera/mx2_camera.c b/drivers/media/platform/soc_camera/mx2_camera.c index 8ac9b72b5ec..791cd1d54a7 100644 --- a/drivers/media/platform/soc_camera/mx2_camera.c +++ b/drivers/media/platform/soc_camera/mx2_camera.c @@ -278,7 +278,8 @@ struct mx2_camera_dev { struct device *dev; struct soc_camera_host soc_host; struct soc_camera_device *icd; - struct clk *clk_csi, *clk_emma_ahb, *clk_emma_ipg; + struct clk *clk_emma_ahb, *clk_emma_ipg; + struct clk *clk_csi_ahb, *clk_csi_per; void __iomem *base_csi, *base_emma; @@ -464,7 +465,8 @@ static void mx2_camera_deactivate(struct mx2_camera_dev *pcdev) { unsigned long flags; - clk_disable_unprepare(pcdev->clk_csi); + clk_disable_unprepare(pcdev->clk_csi_ahb); + clk_disable_unprepare(pcdev->clk_csi_per); writel(0, pcdev->base_csi + CSICR1); if (is_imx27_camera(pcdev)) { writel(0, pcdev->base_emma + PRP_CNTL); @@ -492,10 +494,14 @@ static int mx2_camera_add_device(struct soc_camera_device *icd) if (pcdev->icd) return -EBUSY; - ret = clk_prepare_enable(pcdev->clk_csi); + ret = clk_prepare_enable(pcdev->clk_csi_ahb); if (ret < 0) return ret; + ret = clk_prepare_enable(pcdev->clk_csi_per); + if (ret < 0) + goto exit_csi_ahb; + csicr1 = CSICR1_MCLKEN; if (is_imx27_camera(pcdev)) @@ -512,6 +518,11 @@ static int mx2_camera_add_device(struct soc_camera_device *icd) icd->devnum); return 0; + +exit_csi_ahb: + clk_disable_unprepare(pcdev->clk_csi_ahb); + + return ret; } static void mx2_camera_remove_device(struct soc_camera_device *icd) @@ -1777,10 +1788,17 @@ static int __devinit mx2_camera_probe(struct platform_device *pdev) break; } - pcdev->clk_csi = devm_clk_get(&pdev->dev, "ahb"); - if (IS_ERR(pcdev->clk_csi)) { - dev_err(&pdev->dev, "Could not get csi clock\n"); - err = PTR_ERR(pcdev->clk_csi); + pcdev->clk_csi_ahb = devm_clk_get(&pdev->dev, "ahb"); + if (IS_ERR(pcdev->clk_csi_ahb)) { + dev_err(&pdev->dev, "Could not get csi ahb clock\n"); + err = PTR_ERR(pcdev->clk_csi_ahb); + goto exit; + } + + pcdev->clk_csi_per = devm_clk_get(&pdev->dev, "per"); + if (IS_ERR(pcdev->clk_csi_per)) { + dev_err(&pdev->dev, "Could not get csi per clock\n"); + err = PTR_ERR(pcdev->clk_csi_per); goto exit; } @@ -1790,12 +1808,13 @@ static int __devinit mx2_camera_probe(struct platform_device *pdev) pcdev->platform_flags = pcdev->pdata->flags; - rate = clk_round_rate(pcdev->clk_csi, pcdev->pdata->clk * 2); + rate = clk_round_rate(pcdev->clk_csi_per, + pcdev->pdata->clk * 2); if (rate <= 0) { err = -ENODEV; goto exit; } - err = clk_set_rate(pcdev->clk_csi, rate); + err = clk_set_rate(pcdev->clk_csi_per, rate); if (err < 0) goto exit; } @@ -1853,7 +1872,7 @@ static int __devinit mx2_camera_probe(struct platform_device *pdev) goto exit_free_emma; dev_info(&pdev->dev, "MX2 Camera (CSI) driver probed, clock frequency: %ld\n", - clk_get_rate(pcdev->clk_csi)); + clk_get_rate(pcdev->clk_csi_per)); return 0; diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 2c10938b356..94bdf83b4bc 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -1080,3 +1080,9 @@ config MCP_UCB1200_TS depends on MCP_UCB1200 && INPUT endmenu + +config VEXPRESS_CONFIG + bool + help + Platform configuration infrastructure for the ARM Ltd. + Versatile Express. diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index b53db06d1b4..69f260ae022 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -141,3 +141,4 @@ obj-$(CONFIG_MFD_RC5T583) += rc5t583.o rc5t583-irq.o obj-$(CONFIG_MFD_SEC_CORE) += sec-core.o sec-irq.o obj-$(CONFIG_MFD_SYSCON) += syscon.o obj-$(CONFIG_MFD_LM3533) += lm3533-core.o lm3533-ctrlbank.o +obj-$(CONFIG_VEXPRESS_CONFIG) += vexpress-config.o vexpress-sysreg.o diff --git a/drivers/mfd/vexpress-config.c b/drivers/mfd/vexpress-config.c new file mode 100644 index 00000000000..fae15d88075 --- /dev/null +++ b/drivers/mfd/vexpress-config.c @@ -0,0 +1,277 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Copyright (C) 2012 ARM Limited + */ + +#define pr_fmt(fmt) "vexpress-config: " fmt + +#include <linux/bitops.h> +#include <linux/completion.h> +#include <linux/export.h> +#include <linux/init.h> +#include <linux/list.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/vexpress.h> + + +#define VEXPRESS_CONFIG_MAX_BRIDGES 2 + +struct vexpress_config_bridge { + struct device_node *node; + struct vexpress_config_bridge_info *info; + struct list_head transactions; + spinlock_t transactions_lock; +} vexpress_config_bridges[VEXPRESS_CONFIG_MAX_BRIDGES]; + +static DECLARE_BITMAP(vexpress_config_bridges_map, + ARRAY_SIZE(vexpress_config_bridges)); +static DEFINE_MUTEX(vexpress_config_bridges_mutex); + +struct vexpress_config_bridge *vexpress_config_bridge_register( + struct device_node *node, + struct vexpress_config_bridge_info *info) +{ + struct vexpress_config_bridge *bridge; + int i; + + pr_debug("Registering bridge '%s'\n", info->name); + + mutex_lock(&vexpress_config_bridges_mutex); + i = find_first_zero_bit(vexpress_config_bridges_map, + ARRAY_SIZE(vexpress_config_bridges)); + if (i >= ARRAY_SIZE(vexpress_config_bridges)) { + pr_err("Can't register more bridges!\n"); + mutex_unlock(&vexpress_config_bridges_mutex); + return NULL; + } + __set_bit(i, vexpress_config_bridges_map); + bridge = &vexpress_config_bridges[i]; + + bridge->node = node; + bridge->info = info; + INIT_LIST_HEAD(&bridge->transactions); + spin_lock_init(&bridge->transactions_lock); + + mutex_unlock(&vexpress_config_bridges_mutex); + + return bridge; +} + +void vexpress_config_bridge_unregister(struct vexpress_config_bridge *bridge) +{ + struct vexpress_config_bridge __bridge = *bridge; + int i; + + mutex_lock(&vexpress_config_bridges_mutex); + for (i = 0; i < ARRAY_SIZE(vexpress_config_bridges); i++) + if (&vexpress_config_bridges[i] == bridge) + __clear_bit(i, vexpress_config_bridges_map); + mutex_unlock(&vexpress_config_bridges_mutex); + + WARN_ON(!list_empty(&__bridge.transactions)); + while (!list_empty(&__bridge.transactions)) + cpu_relax(); +} + + +struct vexpress_config_func { + struct vexpress_config_bridge *bridge; + void *func; +}; + +struct vexpress_config_func *__vexpress_config_func_get(struct device *dev, + struct device_node *node) +{ + struct device_node *bridge_node; + struct vexpress_config_func *func; + int i; + + if (WARN_ON(dev && node && dev->of_node != node)) + return NULL; + if (dev && !node) + node = dev->of_node; + + func = kzalloc(sizeof(*func), GFP_KERNEL); + if (!func) + return NULL; + + bridge_node = of_node_get(node); + while (bridge_node) { + const __be32 *prop = of_get_property(bridge_node, + "arm,vexpress,config-bridge", NULL); + + if (prop) { + bridge_node = of_find_node_by_phandle( + be32_to_cpup(prop)); + break; + } + + bridge_node = of_get_next_parent(bridge_node); + } + + mutex_lock(&vexpress_config_bridges_mutex); + for (i = 0; i < ARRAY_SIZE(vexpress_config_bridges); i++) { + struct vexpress_config_bridge *bridge = + &vexpress_config_bridges[i]; + + if (test_bit(i, vexpress_config_bridges_map) && + bridge->node == bridge_node) { + func->bridge = bridge; + func->func = bridge->info->func_get(dev, node); + break; + } + } + mutex_unlock(&vexpress_config_bridges_mutex); + + if (!func->func) { + of_node_put(node); + kfree(func); + return NULL; + } + + return func; +} + +void vexpress_config_func_put(struct vexpress_config_func *func) +{ + func->bridge->info->func_put(func->func); + of_node_put(func->bridge->node); + kfree(func); +} + + +struct vexpress_config_trans { + struct vexpress_config_func *func; + int offset; + bool write; + u32 *data; + int status; + struct completion completion; + struct list_head list; +}; + +static void vexpress_config_dump_trans(const char *what, + struct vexpress_config_trans *trans) +{ + pr_debug("%s %s trans %p func 0x%p offset %d data 0x%x status %d\n", + what, trans->write ? "write" : "read", trans, + trans->func->func, trans->offset, + trans->data ? *trans->data : 0, trans->status); +} + +static int vexpress_config_schedule(struct vexpress_config_trans *trans) +{ + int status; + struct vexpress_config_bridge *bridge = trans->func->bridge; + unsigned long flags; + + init_completion(&trans->completion); + trans->status = -EFAULT; + + spin_lock_irqsave(&bridge->transactions_lock, flags); + + vexpress_config_dump_trans("Executing", trans); + + if (list_empty(&bridge->transactions)) + status = bridge->info->func_exec(trans->func->func, + trans->offset, trans->write, trans->data); + else + status = VEXPRESS_CONFIG_STATUS_WAIT; + + switch (status) { + case VEXPRESS_CONFIG_STATUS_DONE: + vexpress_config_dump_trans("Finished", trans); + trans->status = status; + break; + case VEXPRESS_CONFIG_STATUS_WAIT: + list_add_tail(&trans->list, &bridge->transactions); + break; + } + + spin_unlock_irqrestore(&bridge->transactions_lock, flags); + + return status; +} + +void vexpress_config_complete(struct vexpress_config_bridge *bridge, + int status) +{ + struct vexpress_config_trans *trans; + unsigned long flags; + + spin_lock_irqsave(&bridge->transactions_lock, flags); + + trans = list_first_entry(&bridge->transactions, + struct vexpress_config_trans, list); + vexpress_config_dump_trans("Completed", trans); + + trans->status = status; + list_del(&trans->list); + + if (!list_empty(&bridge->transactions)) { + vexpress_config_dump_trans("Pending", trans); + + bridge->info->func_exec(trans->func->func, trans->offset, + trans->write, trans->data); + } + spin_unlock_irqrestore(&bridge->transactions_lock, flags); + + complete(&trans->completion); +} + +int vexpress_config_wait(struct vexpress_config_trans *trans) +{ + wait_for_completion(&trans->completion); + + return trans->status; +} + + +int vexpress_config_read(struct vexpress_config_func *func, int offset, + u32 *data) +{ + struct vexpress_config_trans trans = { + .func = func, + .offset = offset, + .write = false, + .data = data, + .status = 0, + }; + int status = vexpress_config_schedule(&trans); + + if (status == VEXPRESS_CONFIG_STATUS_WAIT) + status = vexpress_config_wait(&trans); + + return status; +} +EXPORT_SYMBOL(vexpress_config_read); + +int vexpress_config_write(struct vexpress_config_func *func, int offset, + u32 data) +{ + struct vexpress_config_trans trans = { + .func = func, + .offset = offset, + .write = true, + .data = &data, + .status = 0, + }; + int status = vexpress_config_schedule(&trans); + + if (status == VEXPRESS_CONFIG_STATUS_WAIT) + status = vexpress_config_wait(&trans); + + return status; +} +EXPORT_SYMBOL(vexpress_config_write); diff --git a/drivers/mfd/vexpress-sysreg.c b/drivers/mfd/vexpress-sysreg.c new file mode 100644 index 00000000000..733c06bd2d1 --- /dev/null +++ b/drivers/mfd/vexpress-sysreg.c @@ -0,0 +1,475 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Copyright (C) 2012 ARM Limited + */ + +#include <linux/err.h> +#include <linux/gpio.h> +#include <linux/io.h> +#include <linux/leds.h> +#include <linux/of_address.h> +#include <linux/platform_device.h> +#include <linux/regulator/driver.h> +#include <linux/slab.h> +#include <linux/stat.h> +#include <linux/timer.h> +#include <linux/vexpress.h> + +#define SYS_ID 0x000 +#define SYS_SW 0x004 +#define SYS_LED 0x008 +#define SYS_100HZ 0x024 +#define SYS_FLAGS 0x030 +#define SYS_FLAGSSET 0x030 +#define SYS_FLAGSCLR 0x034 +#define SYS_NVFLAGS 0x038 +#define SYS_NVFLAGSSET 0x038 +#define SYS_NVFLAGSCLR 0x03c +#define SYS_MCI 0x048 +#define SYS_FLASH 0x04c +#define SYS_CFGSW 0x058 +#define SYS_24MHZ 0x05c +#define SYS_MISC 0x060 +#define SYS_DMA 0x064 +#define SYS_PROCID0 0x084 +#define SYS_PROCID1 0x088 +#define SYS_CFGDATA 0x0a0 +#define SYS_CFGCTRL 0x0a4 +#define SYS_CFGSTAT 0x0a8 + +#define SYS_HBI_MASK 0xfff +#define SYS_ID_HBI_SHIFT 16 +#define SYS_PROCIDx_HBI_SHIFT 0 + +#define SYS_MCI_CARDIN (1 << 0) +#define SYS_MCI_WPROT (1 << 1) + +#define SYS_FLASH_WPn (1 << 0) + +#define SYS_MISC_MASTERSITE (1 << 14) + +#define SYS_CFGCTRL_START (1 << 31) +#define SYS_CFGCTRL_WRITE (1 << 30) +#define SYS_CFGCTRL_DCC(n) (((n) & 0xf) << 26) +#define SYS_CFGCTRL_FUNC(n) (((n) & 0x3f) << 20) +#define SYS_CFGCTRL_SITE(n) (((n) & 0x3) << 16) +#define SYS_CFGCTRL_POSITION(n) (((n) & 0xf) << 12) +#define SYS_CFGCTRL_DEVICE(n) (((n) & 0xfff) << 0) + +#define SYS_CFGSTAT_ERR (1 << 1) +#define SYS_CFGSTAT_COMPLETE (1 << 0) + + +static void __iomem *vexpress_sysreg_base; +static struct device *vexpress_sysreg_dev; +static int vexpress_master_site; + + +void vexpress_flags_set(u32 data) +{ + writel(~0, vexpress_sysreg_base + SYS_FLAGSCLR); + writel(data, vexpress_sysreg_base + SYS_FLAGSSET); +} + +u32 vexpress_get_procid(int site) +{ + if (site == VEXPRESS_SITE_MASTER) + site = vexpress_master_site; + + return readl(vexpress_sysreg_base + (site == VEXPRESS_SITE_DB1 ? + SYS_PROCID0 : SYS_PROCID1)); +} + +u32 vexpress_get_hbi(int site) +{ + u32 id; + + switch (site) { + case VEXPRESS_SITE_MB: + id = readl(vexpress_sysreg_base + SYS_ID); + return (id >> SYS_ID_HBI_SHIFT) & SYS_HBI_MASK; + case VEXPRESS_SITE_MASTER: + case VEXPRESS_SITE_DB1: + case VEXPRESS_SITE_DB2: + id = vexpress_get_procid(site); + return (id >> SYS_PROCIDx_HBI_SHIFT) & SYS_HBI_MASK; + } + + return ~0; +} + +void __iomem *vexpress_get_24mhz_clock_base(void) +{ + return vexpress_sysreg_base + SYS_24MHZ; +} + + +static void vexpress_sysreg_find_prop(struct device_node *node, + const char *name, u32 *val) +{ + of_node_get(node); + while (node) { + if (of_property_read_u32(node, name, val) == 0) { + of_node_put(node); + return; + } + node = of_get_next_parent(node); + } +} + +unsigned __vexpress_get_site(struct device *dev, struct device_node *node) +{ + u32 site = 0; + + WARN_ON(dev && node && dev->of_node != node); + if (dev && !node) + node = dev->of_node; + + if (node) { + vexpress_sysreg_find_prop(node, "arm,vexpress,site", &site); + } else if (dev && dev->bus == &platform_bus_type) { + struct platform_device *pdev = to_platform_device(dev); + + if (pdev->num_resources == 1 && + pdev->resource[0].flags == IORESOURCE_BUS) + site = pdev->resource[0].start; + } else if (dev && strncmp(dev_name(dev), "ct:", 3) == 0) { + site = VEXPRESS_SITE_MASTER; + } + + if (site == VEXPRESS_SITE_MASTER) + site = vexpress_master_site; + + return site; +} + + +struct vexpress_sysreg_config_func { + u32 template; + u32 device; +}; + +static struct vexpress_config_bridge *vexpress_sysreg_config_bridge; +static struct timer_list vexpress_sysreg_config_timer; +static u32 *vexpress_sysreg_config_data; +static int vexpress_sysreg_config_tries; + +static void *vexpress_sysreg_config_func_get(struct device *dev, + struct device_node *node) +{ + struct vexpress_sysreg_config_func *config_func; + u32 site; + u32 position = 0; + u32 dcc = 0; + u32 func_device[2]; + int err = -EFAULT; + + if (node) { + of_node_get(node); + vexpress_sysreg_find_prop(node, "arm,vexpress,site", &site); + vexpress_sysreg_find_prop(node, "arm,vexpress,position", + &position); + vexpress_sysreg_find_prop(node, "arm,vexpress,dcc", &dcc); + err = of_property_read_u32_array(node, + "arm,vexpress-sysreg,func", func_device, + ARRAY_SIZE(func_device)); + of_node_put(node); + } else if (dev && dev->bus == &platform_bus_type) { + struct platform_device *pdev = to_platform_device(dev); + + if (pdev->num_resources == 1 && + pdev->resource[0].flags == IORESOURCE_BUS) { + site = pdev->resource[0].start; + func_device[0] = pdev->resource[0].end; + func_device[1] = pdev->id; + err = 0; + } + } + if (err) + return NULL; + + config_func = kzalloc(sizeof(*config_func), GFP_KERNEL); + if (!config_func) + return NULL; + + config_func->template = SYS_CFGCTRL_DCC(dcc); + config_func->template |= SYS_CFGCTRL_FUNC(func_device[0]); + config_func->template |= SYS_CFGCTRL_SITE(site == VEXPRESS_SITE_MASTER ? + vexpress_master_site : site); + config_func->template |= SYS_CFGCTRL_POSITION(position); + config_func->device |= func_device[1]; + + dev_dbg(vexpress_sysreg_dev, "func 0x%p = 0x%x, %d\n", config_func, + config_func->template, config_func->device); + + return config_func; +} + +static void vexpress_sysreg_config_func_put(void *func) +{ + kfree(func); +} + +static int vexpress_sysreg_config_func_exec(void *func, int offset, + bool write, u32 *data) +{ + int status; + struct vexpress_sysreg_config_func *config_func = func; + u32 command; + + if (WARN_ON(!vexpress_sysreg_base)) + return -ENOENT; + + command = readl(vexpress_sysreg_base + SYS_CFGCTRL); + if (WARN_ON(command & SYS_CFGCTRL_START)) + return -EBUSY; + + command = SYS_CFGCTRL_START; + command |= write ? SYS_CFGCTRL_WRITE : 0; + command |= config_func->template; + command |= SYS_CFGCTRL_DEVICE(config_func->device + offset); + + /* Use a canary for reads */ + if (!write) + *data = 0xdeadbeef; + + dev_dbg(vexpress_sysreg_dev, "command %x, data %x\n", + command, *data); + writel(*data, vexpress_sysreg_base + SYS_CFGDATA); + writel(0, vexpress_sysreg_base + SYS_CFGSTAT); + writel(command, vexpress_sysreg_base + SYS_CFGCTRL); + mb(); + + if (vexpress_sysreg_dev) { + /* Schedule completion check */ + if (!write) + vexpress_sysreg_config_data = data; + vexpress_sysreg_config_tries = 100; + mod_timer(&vexpress_sysreg_config_timer, + jiffies + usecs_to_jiffies(100)); + status = VEXPRESS_CONFIG_STATUS_WAIT; + } else { + /* Early execution, no timer available, have to spin */ + u32 cfgstat; + + do { + cpu_relax(); + cfgstat = readl(vexpress_sysreg_base + SYS_CFGSTAT); + } while (!cfgstat); + + if (!write && (cfgstat & SYS_CFGSTAT_COMPLETE)) + *data = readl(vexpress_sysreg_base + SYS_CFGDATA); + status = VEXPRESS_CONFIG_STATUS_DONE; + + if (cfgstat & SYS_CFGSTAT_ERR) + status = -EINVAL; + } + + return status; +} + +struct vexpress_config_bridge_info vexpress_sysreg_config_bridge_info = { + .name = "vexpress-sysreg", + .func_get = vexpress_sysreg_config_func_get, + .func_put = vexpress_sysreg_config_func_put, + .func_exec = vexpress_sysreg_config_func_exec, +}; + +static void vexpress_sysreg_config_complete(unsigned long data) +{ + int status = VEXPRESS_CONFIG_STATUS_DONE; + u32 cfgstat = readl(vexpress_sysreg_base + SYS_CFGSTAT); + + if (cfgstat & SYS_CFGSTAT_ERR) + status = -EINVAL; + if (!vexpress_sysreg_config_tries--) + status = -ETIMEDOUT; + + if (status < 0) { + dev_err(vexpress_sysreg_dev, "error %d\n", status); + } else if (!(cfgstat & SYS_CFGSTAT_COMPLETE)) { + mod_timer(&vexpress_sysreg_config_timer, + jiffies + usecs_to_jiffies(50)); + return; + } + + if (vexpress_sysreg_config_data) { + *vexpress_sysreg_config_data = readl(vexpress_sysreg_base + + SYS_CFGDATA); + dev_dbg(vexpress_sysreg_dev, "read data %x\n", + *vexpress_sysreg_config_data); + vexpress_sysreg_config_data = NULL; + } + + vexpress_config_complete(vexpress_sysreg_config_bridge, status); +} + + +void __init vexpress_sysreg_early_init(void __iomem *base) +{ + struct device_node *node = of_find_compatible_node(NULL, NULL, + "arm,vexpress-sysreg"); + + if (node) + base = of_iomap(node, 0); + + if (WARN_ON(!base)) + return; + + vexpress_sysreg_base = base; + + if (readl(vexpress_sysreg_base + SYS_MISC) & SYS_MISC_MASTERSITE) + vexpress_master_site = VEXPRESS_SITE_DB2; + else + vexpress_master_site = VEXPRESS_SITE_DB1; + + vexpress_sysreg_config_bridge = vexpress_config_bridge_register( + node, &vexpress_sysreg_config_bridge_info); + WARN_ON(!vexpress_sysreg_config_bridge); +} + +void __init vexpress_sysreg_of_early_init(void) +{ + vexpress_sysreg_early_init(NULL); +} + + +static struct vexpress_sysreg_gpio { + unsigned long reg; + u32 value; +} vexpress_sysreg_gpios[] = { + [VEXPRESS_GPIO_MMC_CARDIN] = { + .reg = SYS_MCI, + .value = SYS_MCI_CARDIN, + }, + [VEXPRESS_GPIO_MMC_WPROT] = { + .reg = SYS_MCI, + .value = SYS_MCI_WPROT, + }, + [VEXPRESS_GPIO_FLASH_WPn] = { + .reg = SYS_FLASH, + .value = SYS_FLASH_WPn, + }, +}; + +static int vexpress_sysreg_gpio_direction_input(struct gpio_chip *chip, + unsigned offset) +{ + return 0; +} + +static int vexpress_sysreg_gpio_direction_output(struct gpio_chip *chip, + unsigned offset, int value) +{ + return 0; +} + +static int vexpress_sysreg_gpio_get(struct gpio_chip *chip, + unsigned offset) +{ + struct vexpress_sysreg_gpio *gpio = &vexpress_sysreg_gpios[offset]; + u32 reg_value = readl(vexpress_sysreg_base + gpio->reg); + + return !!(reg_value & gpio->value); +} + +static void vexpress_sysreg_gpio_set(struct gpio_chip *chip, + unsigned offset, int value) +{ + struct vexpress_sysreg_gpio *gpio = &vexpress_sysreg_gpios[offset]; + u32 reg_value = readl(vexpress_sysreg_base + gpio->reg); + + if (value) + reg_value |= gpio->value; + else + reg_value &= ~gpio->value; + + writel(reg_value, vexpress_sysreg_base + gpio->reg); +} + +static struct gpio_chip vexpress_sysreg_gpio_chip = { + .label = "vexpress-sysreg", + .direction_input = vexpress_sysreg_gpio_direction_input, + .direction_output = vexpress_sysreg_gpio_direction_output, + .get = vexpress_sysreg_gpio_get, + .set = vexpress_sysreg_gpio_set, + .ngpio = ARRAY_SIZE(vexpress_sysreg_gpios), + .base = 0, +}; + + +static ssize_t vexpress_sysreg_sys_id_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return sprintf(buf, "0x%08x\n", readl(vexpress_sysreg_base + SYS_ID)); +} + +DEVICE_ATTR(sys_id, S_IRUGO, vexpress_sysreg_sys_id_show, NULL); + +static int __devinit vexpress_sysreg_probe(struct platform_device *pdev) +{ + int err; + struct resource *res = platform_get_resource(pdev, + IORESOURCE_MEM, 0); + + if (!devm_request_mem_region(&pdev->dev, res->start, + resource_size(res), pdev->name)) { + dev_err(&pdev->dev, "Failed to request memory region!\n"); + return -EBUSY; + } + + if (!vexpress_sysreg_base) + vexpress_sysreg_base = devm_ioremap(&pdev->dev, res->start, + resource_size(res)); + + if (!vexpress_sysreg_base) { + dev_err(&pdev->dev, "Failed to obtain base address!\n"); + return -EFAULT; + } + + setup_timer(&vexpress_sysreg_config_timer, + vexpress_sysreg_config_complete, 0); + + vexpress_sysreg_gpio_chip.dev = &pdev->dev; + err = gpiochip_add(&vexpress_sysreg_gpio_chip); + if (err) { + vexpress_config_bridge_unregister( + vexpress_sysreg_config_bridge); + dev_err(&pdev->dev, "Failed to register GPIO chip! (%d)\n", + err); + return err; + } + + vexpress_sysreg_dev = &pdev->dev; + + device_create_file(vexpress_sysreg_dev, &dev_attr_sys_id); + + return 0; +} + +static const struct of_device_id vexpress_sysreg_match[] = { + { .compatible = "arm,vexpress-sysreg", }, + {}, +}; + +static struct platform_driver vexpress_sysreg_driver = { + .driver = { + .name = "vexpress-sysreg", + .of_match_table = vexpress_sysreg_match, + }, + .probe = vexpress_sysreg_probe, +}; + +static int __init vexpress_sysreg_init(void) +{ + return platform_driver_register(&vexpress_sysreg_driver); +} +core_initcall(vexpress_sysreg_init); diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig index 2e47c2ed0a2..df304868beb 100644 --- a/drivers/mtd/maps/Kconfig +++ b/drivers/mtd/maps/Kconfig @@ -324,13 +324,6 @@ config MTD_SOLUTIONENGINE This enables access to the flash chips on the Hitachi SolutionEngine and similar boards. Say 'Y' if you are building a kernel for such a board. -config MTD_CDB89712 - tristate "Cirrus CDB89712 evaluation board mappings" - depends on MTD_CFI && ARCH_CDB89712 - help - This enables access to the flash or ROM chips on the CDB89712 board. - If you have such a board, say 'Y'. - config MTD_SA1100 tristate "CFI Flash device mapped on StrongARM SA11x0" depends on MTD_CFI && ARCH_SA1100 diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile index deb43e9a1e7..a0240edd196 100644 --- a/drivers/mtd/maps/Makefile +++ b/drivers/mtd/maps/Makefile @@ -7,7 +7,6 @@ obj-$(CONFIG_MTD) += map_funcs.o endif # Chip mappings -obj-$(CONFIG_MTD_CDB89712) += cdb89712.o obj-$(CONFIG_MTD_CFI_FLAGADM) += cfi_flagadm.o obj-$(CONFIG_MTD_DC21285) += dc21285.o obj-$(CONFIG_MTD_DILNETPC) += dilnetpc.o diff --git a/drivers/mtd/maps/cdb89712.c b/drivers/mtd/maps/cdb89712.c deleted file mode 100644 index c29cbf87ea0..00000000000 --- a/drivers/mtd/maps/cdb89712.c +++ /dev/null @@ -1,278 +0,0 @@ -/* - * Flash on Cirrus CDB89712 - * - */ - -#include <linux/module.h> -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/ioport.h> -#include <linux/init.h> -#include <asm/io.h> -#include <mach/hardware.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/map.h> -#include <linux/mtd/partitions.h> - -/* dynamic ioremap() areas */ -#define FLASH_START 0x00000000 -#define FLASH_SIZE 0x800000 -#define FLASH_WIDTH 4 - -#define SRAM_START 0x60000000 -#define SRAM_SIZE 0xc000 -#define SRAM_WIDTH 4 - -#define BOOTROM_START 0x70000000 -#define BOOTROM_SIZE 0x80 -#define BOOTROM_WIDTH 4 - - -static struct mtd_info *flash_mtd; - -struct map_info cdb89712_flash_map = { - .name = "flash", - .size = FLASH_SIZE, - .bankwidth = FLASH_WIDTH, - .phys = FLASH_START, -}; - -struct resource cdb89712_flash_resource = { - .name = "Flash", - .start = FLASH_START, - .end = FLASH_START + FLASH_SIZE - 1, - .flags = IORESOURCE_IO | IORESOURCE_BUSY, -}; - -static int __init init_cdb89712_flash (void) -{ - int err; - - if (request_resource (&ioport_resource, &cdb89712_flash_resource)) { - printk(KERN_NOTICE "Failed to reserve Cdb89712 FLASH space\n"); - err = -EBUSY; - goto out; - } - - cdb89712_flash_map.virt = ioremap(FLASH_START, FLASH_SIZE); - if (!cdb89712_flash_map.virt) { - printk(KERN_NOTICE "Failed to ioremap Cdb89712 FLASH space\n"); - err = -EIO; - goto out_resource; - } - simple_map_init(&cdb89712_flash_map); - flash_mtd = do_map_probe("cfi_probe", &cdb89712_flash_map); - if (!flash_mtd) { - flash_mtd = do_map_probe("map_rom", &cdb89712_flash_map); - if (flash_mtd) - flash_mtd->erasesize = 0x10000; - } - if (!flash_mtd) { - printk("FLASH probe failed\n"); - err = -ENXIO; - goto out_ioremap; - } - - flash_mtd->owner = THIS_MODULE; - - if (mtd_device_register(flash_mtd, NULL, 0)) { - printk("FLASH device addition failed\n"); - err = -ENOMEM; - goto out_probe; - } - - return 0; - -out_probe: - map_destroy(flash_mtd); - flash_mtd = 0; -out_ioremap: - iounmap((void *)cdb89712_flash_map.virt); -out_resource: - release_resource (&cdb89712_flash_resource); -out: - return err; -} - - - - - -static struct mtd_info *sram_mtd; - -struct map_info cdb89712_sram_map = { - .name = "SRAM", - .size = SRAM_SIZE, - .bankwidth = SRAM_WIDTH, - .phys = SRAM_START, -}; - -struct resource cdb89712_sram_resource = { - .name = "SRAM", - .start = SRAM_START, - .end = SRAM_START + SRAM_SIZE - 1, - .flags = IORESOURCE_IO | IORESOURCE_BUSY, -}; - -static int __init init_cdb89712_sram (void) -{ - int err; - - if (request_resource (&ioport_resource, &cdb89712_sram_resource)) { - printk(KERN_NOTICE "Failed to reserve Cdb89712 SRAM space\n"); - err = -EBUSY; - goto out; - } - - cdb89712_sram_map.virt = ioremap(SRAM_START, SRAM_SIZE); - if (!cdb89712_sram_map.virt) { - printk(KERN_NOTICE "Failed to ioremap Cdb89712 SRAM space\n"); - err = -EIO; - goto out_resource; - } - simple_map_init(&cdb89712_sram_map); - sram_mtd = do_map_probe("map_ram", &cdb89712_sram_map); - if (!sram_mtd) { - printk("SRAM probe failed\n"); - err = -ENXIO; - goto out_ioremap; - } - - sram_mtd->owner = THIS_MODULE; - sram_mtd->erasesize = 16; - - if (mtd_device_register(sram_mtd, NULL, 0)) { - printk("SRAM device addition failed\n"); - err = -ENOMEM; - goto out_probe; - } - - return 0; - -out_probe: - map_destroy(sram_mtd); - sram_mtd = 0; -out_ioremap: - iounmap((void *)cdb89712_sram_map.virt); -out_resource: - release_resource (&cdb89712_sram_resource); -out: - return err; -} - - - - - - - -static struct mtd_info *bootrom_mtd; - -struct map_info cdb89712_bootrom_map = { - .name = "BootROM", - .size = BOOTROM_SIZE, - .bankwidth = BOOTROM_WIDTH, - .phys = BOOTROM_START, -}; - -struct resource cdb89712_bootrom_resource = { - .name = "BootROM", - .start = BOOTROM_START, - .end = BOOTROM_START + BOOTROM_SIZE - 1, - .flags = IORESOURCE_IO | IORESOURCE_BUSY, -}; - -static int __init init_cdb89712_bootrom (void) -{ - int err; - - if (request_resource (&ioport_resource, &cdb89712_bootrom_resource)) { - printk(KERN_NOTICE "Failed to reserve Cdb89712 BOOTROM space\n"); - err = -EBUSY; - goto out; - } - - cdb89712_bootrom_map.virt = ioremap(BOOTROM_START, BOOTROM_SIZE); - if (!cdb89712_bootrom_map.virt) { - printk(KERN_NOTICE "Failed to ioremap Cdb89712 BootROM space\n"); - err = -EIO; - goto out_resource; - } - simple_map_init(&cdb89712_bootrom_map); - bootrom_mtd = do_map_probe("map_rom", &cdb89712_bootrom_map); - if (!bootrom_mtd) { - printk("BootROM probe failed\n"); - err = -ENXIO; - goto out_ioremap; - } - - bootrom_mtd->owner = THIS_MODULE; - bootrom_mtd->erasesize = 0x10000; - - if (mtd_device_register(bootrom_mtd, NULL, 0)) { - printk("BootROM device addition failed\n"); - err = -ENOMEM; - goto out_probe; - } - - return 0; - -out_probe: - map_destroy(bootrom_mtd); - bootrom_mtd = 0; -out_ioremap: - iounmap((void *)cdb89712_bootrom_map.virt); -out_resource: - release_resource (&cdb89712_bootrom_resource); -out: - return err; -} - - - - - -static int __init init_cdb89712_maps(void) -{ - - printk(KERN_INFO "Cirrus CDB89712 MTD mappings:\n Flash 0x%x at 0x%x\n SRAM 0x%x at 0x%x\n BootROM 0x%x at 0x%x\n", - FLASH_SIZE, FLASH_START, SRAM_SIZE, SRAM_START, BOOTROM_SIZE, BOOTROM_START); - - init_cdb89712_flash(); - init_cdb89712_sram(); - init_cdb89712_bootrom(); - - return 0; -} - - -static void __exit cleanup_cdb89712_maps(void) -{ - if (sram_mtd) { - mtd_device_unregister(sram_mtd); - map_destroy(sram_mtd); - iounmap((void *)cdb89712_sram_map.virt); - release_resource (&cdb89712_sram_resource); - } - - if (flash_mtd) { - mtd_device_unregister(flash_mtd); - map_destroy(flash_mtd); - iounmap((void *)cdb89712_flash_map.virt); - release_resource (&cdb89712_flash_resource); - } - - if (bootrom_mtd) { - mtd_device_unregister(bootrom_mtd); - map_destroy(bootrom_mtd); - iounmap((void *)cdb89712_bootrom_map.virt); - release_resource (&cdb89712_bootrom_resource); - } -} - -module_init(init_cdb89712_maps); -module_exit(cleanup_cdb89712_maps); - -MODULE_AUTHOR("Ray L"); -MODULE_DESCRIPTION("ARM CDB89712 map driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index 4883139460b..531807dec6b 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -49,13 +49,6 @@ config MTD_NAND_MUSEUM_IDS NAND chips (page size 256 byte, erase size 4-8KiB). The IDs of these chips were reused by later, larger chips. -config MTD_NAND_AUTCPU12 - tristate "SmartMediaCard on autronix autcpu12 board" - depends on ARCH_AUTCPU12 - help - This enables the driver for the autronix autcpu12 board to - access the SmartMediaCard. - config MTD_NAND_DENALI depends on PCI tristate "Support Denali NAND controller on Intel Moorestown" @@ -86,12 +79,6 @@ config MTD_NAND_GPIO help This enables a GPIO based NAND flash driver. -config MTD_NAND_SPIA - tristate "NAND Flash device on SPIA board" - depends on ARCH_P720T - help - If you had to ask, you don't have one. Say 'N'. - config MTD_NAND_AMS_DELTA tristate "NAND Flash device on Amstrad E3" depends on MACH_AMS_DELTA diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile index 2cbd0916b73..6c7f2b3ca8a 100644 --- a/drivers/mtd/nand/Makefile +++ b/drivers/mtd/nand/Makefile @@ -9,9 +9,7 @@ obj-$(CONFIG_MTD_NAND_IDS) += nand_ids.o obj-$(CONFIG_MTD_SM_COMMON) += sm_common.o obj-$(CONFIG_MTD_NAND_CAFE) += cafe_nand.o -obj-$(CONFIG_MTD_NAND_SPIA) += spia.o obj-$(CONFIG_MTD_NAND_AMS_DELTA) += ams-delta.o -obj-$(CONFIG_MTD_NAND_AUTCPU12) += autcpu12.o obj-$(CONFIG_MTD_NAND_DENALI) += denali.o obj-$(CONFIG_MTD_NAND_AU1550) += au1550nd.o obj-$(CONFIG_MTD_NAND_BF5XX) += bf5xx_nand.o diff --git a/drivers/mtd/nand/autcpu12.c b/drivers/mtd/nand/autcpu12.c deleted file mode 100644 index 04769a49a7c..00000000000 --- a/drivers/mtd/nand/autcpu12.c +++ /dev/null @@ -1,237 +0,0 @@ -/* - * drivers/mtd/autcpu12.c - * - * Copyright (c) 2002 Thomas Gleixner <tgxl@linutronix.de> - * - * Derived from drivers/mtd/spia.c - * Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Overview: - * This is a device driver for the NAND flash device found on the - * autronix autcpu12 board, which is a SmartMediaCard. It supports - * 16MiB, 32MiB and 64MiB cards. - * - * - * 02-12-2002 TG Cleanup of module params - * - * 02-20-2002 TG adjusted for different rd/wr address support - * added support for read device ready/busy line - * added page_cache - * - * 10-06-2002 TG 128K card support added - */ - -#include <linux/slab.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/nand.h> -#include <linux/mtd/partitions.h> -#include <asm/io.h> -#include <mach/hardware.h> -#include <asm/sizes.h> -#include <mach/autcpu12.h> - -/* - * MTD structure for AUTCPU12 board - */ -static struct mtd_info *autcpu12_mtd = NULL; -static void __iomem *autcpu12_fio_base; - -/* - * Define partitions for flash devices - */ -static struct mtd_partition partition_info16k[] = { - { .name = "AUTCPU12 flash partition 1", - .offset = 0, - .size = 8 * SZ_1M }, - { .name = "AUTCPU12 flash partition 2", - .offset = 8 * SZ_1M, - .size = 8 * SZ_1M }, -}; - -static struct mtd_partition partition_info32k[] = { - { .name = "AUTCPU12 flash partition 1", - .offset = 0, - .size = 8 * SZ_1M }, - { .name = "AUTCPU12 flash partition 2", - .offset = 8 * SZ_1M, - .size = 24 * SZ_1M }, -}; - -static struct mtd_partition partition_info64k[] = { - { .name = "AUTCPU12 flash partition 1", - .offset = 0, - .size = 16 * SZ_1M }, - { .name = "AUTCPU12 flash partition 2", - .offset = 16 * SZ_1M, - .size = 48 * SZ_1M }, -}; - -static struct mtd_partition partition_info128k[] = { - { .name = "AUTCPU12 flash partition 1", - .offset = 0, - .size = 16 * SZ_1M }, - { .name = "AUTCPU12 flash partition 2", - .offset = 16 * SZ_1M, - .size = 112 * SZ_1M }, -}; - -#define NUM_PARTITIONS16K 2 -#define NUM_PARTITIONS32K 2 -#define NUM_PARTITIONS64K 2 -#define NUM_PARTITIONS128K 2 -/* - * hardware specific access to control-lines - * - * ALE bit 4 autcpu12_pedr - * CLE bit 5 autcpu12_pedr - * NCE bit 0 fio_ctrl - * - */ -static void autcpu12_hwcontrol(struct mtd_info *mtd, int cmd, - unsigned int ctrl) -{ - struct nand_chip *chip = mtd->priv; - - if (ctrl & NAND_CTRL_CHANGE) { - void __iomem *addr; - unsigned char bits; - - bits = clps_readb(AUTCPU12_SMC_PORT_OFFSET) & ~0x30; - bits |= (ctrl & NAND_CLE) << 4; - bits |= (ctrl & NAND_ALE) << 2; - clps_writeb(bits, AUTCPU12_SMC_PORT_OFFSET); - - addr = autcpu12_fio_base + AUTCPU12_SMC_SELECT_OFFSET; - writeb((readb(addr) & ~0x1) | (ctrl & NAND_NCE), addr); - } - - if (cmd != NAND_CMD_NONE) - writeb(cmd, chip->IO_ADDR_W); -} - -/* - * read device ready pin - */ -int autcpu12_device_ready(struct mtd_info *mtd) -{ - return clps_readb(AUTCPU12_SMC_PORT_OFFSET) & AUTCPU12_SMC_RDY; -} - -/* - * Main initialization routine - */ -static int __init autcpu12_init(void) -{ - struct nand_chip *this; - int err = 0; - - /* Allocate memory for MTD device structure and private data */ - autcpu12_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), - GFP_KERNEL); - if (!autcpu12_mtd) { - printk("Unable to allocate AUTCPU12 NAND MTD device structure.\n"); - err = -ENOMEM; - goto out; - } - - /* map physical address */ - autcpu12_fio_base = ioremap(AUTCPU12_PHYS_SMC, SZ_1K); - if (!autcpu12_fio_base) { - printk("Ioremap autcpu12 SmartMedia Card failed\n"); - err = -EIO; - goto out_mtd; - } - - /* Get pointer to private data */ - this = (struct nand_chip *)(&autcpu12_mtd[1]); - - /* Initialize structures */ - memset(autcpu12_mtd, 0, sizeof(struct mtd_info)); - memset(this, 0, sizeof(struct nand_chip)); - - /* Link the private data with the MTD structure */ - autcpu12_mtd->priv = this; - autcpu12_mtd->owner = THIS_MODULE; - - /* Set address of NAND IO lines */ - this->IO_ADDR_R = autcpu12_fio_base; - this->IO_ADDR_W = autcpu12_fio_base; - this->cmd_ctrl = autcpu12_hwcontrol; - this->dev_ready = autcpu12_device_ready; - /* 20 us command delay time */ - this->chip_delay = 20; - this->ecc.mode = NAND_ECC_SOFT; - - /* Enable the following for a flash based bad block table */ - /* - this->bbt_options = NAND_BBT_USE_FLASH; - */ - this->bbt_options = NAND_BBT_USE_FLASH; - - /* Scan to find existence of the device */ - if (nand_scan(autcpu12_mtd, 1)) { - err = -ENXIO; - goto out_ior; - } - - /* Register the partitions */ - switch (autcpu12_mtd->size) { - case SZ_16M: - mtd_device_register(autcpu12_mtd, partition_info16k, - NUM_PARTITIONS16K); - break; - case SZ_32M: - mtd_device_register(autcpu12_mtd, partition_info32k, - NUM_PARTITIONS32K); - break; - case SZ_64M: - mtd_device_register(autcpu12_mtd, partition_info64k, - NUM_PARTITIONS64K); - break; - case SZ_128M: - mtd_device_register(autcpu12_mtd, partition_info128k, - NUM_PARTITIONS128K); - break; - default: - printk("Unsupported SmartMedia device\n"); - err = -ENXIO; - goto out_ior; - } - goto out; - - out_ior: - iounmap(autcpu12_fio_base); - out_mtd: - kfree(autcpu12_mtd); - out: - return err; -} - -module_init(autcpu12_init); - -/* - * Clean up routine - */ -static void __exit autcpu12_cleanup(void) -{ - /* Release resources, unregister device */ - nand_release(autcpu12_mtd); - - /* unmap physical address */ - iounmap(autcpu12_fio_base); - - /* Free the MTD device structure */ - kfree(autcpu12_mtd); -} - -module_exit(autcpu12_cleanup); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Thomas Gleixner <tglx@linutronix.de>"); -MODULE_DESCRIPTION("Glue layer for SmartMediaCard on autronix autcpu12"); diff --git a/drivers/mtd/nand/spia.c b/drivers/mtd/nand/spia.c deleted file mode 100644 index bef76cd7c24..00000000000 --- a/drivers/mtd/nand/spia.c +++ /dev/null @@ -1,176 +0,0 @@ -/* - * drivers/mtd/nand/spia.c - * - * Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com) - * - * - * 10-29-2001 TG change to support hardwarespecific access - * to controllines (due to change in nand.c) - * page_cache added - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Overview: - * This is a device driver for the NAND flash device found on the - * SPIA board which utilizes the Toshiba TC58V64AFT part. This is - * a 64Mibit (8MiB x 8 bits) NAND flash device. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/module.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/nand.h> -#include <linux/mtd/partitions.h> -#include <asm/io.h> - -/* - * MTD structure for SPIA board - */ -static struct mtd_info *spia_mtd = NULL; - -/* - * Values specific to the SPIA board (used with EP7212 processor) - */ -#define SPIA_IO_BASE 0xd0000000 /* Start of EP7212 IO address space */ -#define SPIA_FIO_BASE 0xf0000000 /* Address where flash is mapped */ -#define SPIA_PEDR 0x0080 /* - * IO offset to Port E data register - * where the CLE, ALE and NCE pins - * are wired to. - */ -#define SPIA_PEDDR 0x00c0 /* - * IO offset to Port E data direction - * register so we can control the IO - * lines. - */ - -/* - * Module stuff - */ - -static int spia_io_base = SPIA_IO_BASE; -static int spia_fio_base = SPIA_FIO_BASE; -static int spia_pedr = SPIA_PEDR; -static int spia_peddr = SPIA_PEDDR; - -module_param(spia_io_base, int, 0); -module_param(spia_fio_base, int, 0); -module_param(spia_pedr, int, 0); -module_param(spia_peddr, int, 0); - -/* - * Define partitions for flash device - */ -static const struct mtd_partition partition_info[] = { - { - .name = "SPIA flash partition 1", - .offset = 0, - .size = 2 * 1024 * 1024}, - { - .name = "SPIA flash partition 2", - .offset = 2 * 1024 * 1024, - .size = 6 * 1024 * 1024} -}; - -#define NUM_PARTITIONS 2 - -/* - * hardware specific access to control-lines - * - * ctrl: - * NAND_CNE: bit 0 -> bit 2 - * NAND_CLE: bit 1 -> bit 0 - * NAND_ALE: bit 2 -> bit 1 - */ -static void spia_hwcontrol(struct mtd_info *mtd, int cmd) -{ - struct nand_chip *chip = mtd->priv; - - if (ctrl & NAND_CTRL_CHANGE) { - void __iomem *addr = spia_io_base + spia_pedr; - unsigned char bits; - - bits = (ctrl & NAND_CNE) << 2; - bits |= (ctrl & NAND_CLE | NAND_ALE) >> 1; - writeb((readb(addr) & ~0x7) | bits, addr); - } - - if (cmd != NAND_CMD_NONE) - writeb(cmd, chip->IO_ADDR_W); -} - -/* - * Main initialization routine - */ -static int __init spia_init(void) -{ - struct nand_chip *this; - - /* Allocate memory for MTD device structure and private data */ - spia_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL); - if (!spia_mtd) { - printk("Unable to allocate SPIA NAND MTD device structure.\n"); - return -ENOMEM; - } - - /* Get pointer to private data */ - this = (struct nand_chip *)(&spia_mtd[1]); - - /* Initialize structures */ - memset(spia_mtd, 0, sizeof(struct mtd_info)); - memset(this, 0, sizeof(struct nand_chip)); - - /* Link the private data with the MTD structure */ - spia_mtd->priv = this; - spia_mtd->owner = THIS_MODULE; - - /* - * Set GPIO Port E control register so that the pins are configured - * to be outputs for controlling the NAND flash. - */ - (*(volatile unsigned char *)(spia_io_base + spia_peddr)) = 0x07; - - /* Set address of NAND IO lines */ - this->IO_ADDR_R = (void __iomem *)spia_fio_base; - this->IO_ADDR_W = (void __iomem *)spia_fio_base; - /* Set address of hardware control function */ - this->cmd_ctrl = spia_hwcontrol; - /* 15 us command delay time */ - this->chip_delay = 15; - - /* Scan to find existence of the device */ - if (nand_scan(spia_mtd, 1)) { - kfree(spia_mtd); - return -ENXIO; - } - - /* Register the partitions */ - mtd_device_register(spia_mtd, partition_info, NUM_PARTITIONS); - - /* Return happy */ - return 0; -} - -module_init(spia_init); - -/* - * Clean up routine - */ -static void __exit spia_cleanup(void) -{ - /* Release resources, unregister device */ - nand_release(spia_mtd); - - /* Free the MTD device structure */ - kfree(spia_mtd); -} - -module_exit(spia_cleanup); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Steven J. Hill <sjhill@realitydiluted.com"); -MODULE_DESCRIPTION("Board-specific glue layer for NAND flash on SPIA board"); diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig index 390ab69ea56..c31aeb01bb0 100644 --- a/drivers/pinctrl/Kconfig +++ b/drivers/pinctrl/Kconfig @@ -190,6 +190,11 @@ config PINCTRL_EXYNOS4 depends on OF && GPIOLIB select PINCTRL_SAMSUNG +config PINCTRL_EXYNOS5440 + bool "Samsung EXYNOS5440 SoC pinctrl driver" + select PINMUX + select PINCONF + source "drivers/pinctrl/mvebu/Kconfig" source "drivers/pinctrl/spear/Kconfig" diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile index f95f5ed923b..fc4606f27dc 100644 --- a/drivers/pinctrl/Makefile +++ b/drivers/pinctrl/Makefile @@ -37,6 +37,7 @@ obj-$(CONFIG_PINCTRL_U300) += pinctrl-u300.o obj-$(CONFIG_PINCTRL_COH901) += pinctrl-coh901.o obj-$(CONFIG_PINCTRL_SAMSUNG) += pinctrl-samsung.o obj-$(CONFIG_PINCTRL_EXYNOS4) += pinctrl-exynos.o +obj-$(CONFIG_PINCTRL_EXYNOS5440) += pinctrl-exynos5440.o obj-$(CONFIG_PINCTRL_XWAY) += pinctrl-xway.o obj-$(CONFIG_PINCTRL_LANTIQ) += pinctrl-lantiq.o diff --git a/drivers/pinctrl/pinctrl-exynos.c b/drivers/pinctrl/pinctrl-exynos.c index 6ff665209a4..538b9ddaadf 100644 --- a/drivers/pinctrl/pinctrl-exynos.c +++ b/drivers/pinctrl/pinctrl-exynos.c @@ -41,46 +41,46 @@ static const struct of_device_id exynos_wkup_irq_ids[] = { static void exynos_gpio_irq_unmask(struct irq_data *irqd) { - struct samsung_pinctrl_drv_data *d = irqd->domain->host_data; - struct exynos_geint_data *edata = irq_data_get_irq_handler_data(irqd); - unsigned long reg_mask = d->ctrl->geint_mask + edata->eint_offset; + struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd); + struct samsung_pinctrl_drv_data *d = bank->drvdata; + unsigned long reg_mask = d->ctrl->geint_mask + bank->eint_offset; unsigned long mask; mask = readl(d->virt_base + reg_mask); - mask &= ~(1 << edata->pin); + mask &= ~(1 << irqd->hwirq); writel(mask, d->virt_base + reg_mask); } static void exynos_gpio_irq_mask(struct irq_data *irqd) { - struct samsung_pinctrl_drv_data *d = irqd->domain->host_data; - struct exynos_geint_data *edata = irq_data_get_irq_handler_data(irqd); - unsigned long reg_mask = d->ctrl->geint_mask + edata->eint_offset; + struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd); + struct samsung_pinctrl_drv_data *d = bank->drvdata; + unsigned long reg_mask = d->ctrl->geint_mask + bank->eint_offset; unsigned long mask; mask = readl(d->virt_base + reg_mask); - mask |= 1 << edata->pin; + mask |= 1 << irqd->hwirq; writel(mask, d->virt_base + reg_mask); } static void exynos_gpio_irq_ack(struct irq_data *irqd) { - struct samsung_pinctrl_drv_data *d = irqd->domain->host_data; - struct exynos_geint_data *edata = irq_data_get_irq_handler_data(irqd); - unsigned long reg_pend = d->ctrl->geint_pend + edata->eint_offset; + struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd); + struct samsung_pinctrl_drv_data *d = bank->drvdata; + unsigned long reg_pend = d->ctrl->geint_pend + bank->eint_offset; - writel(1 << edata->pin, d->virt_base + reg_pend); + writel(1 << irqd->hwirq, d->virt_base + reg_pend); } static int exynos_gpio_irq_set_type(struct irq_data *irqd, unsigned int type) { - struct samsung_pinctrl_drv_data *d = irqd->domain->host_data; + struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd); + struct samsung_pinctrl_drv_data *d = bank->drvdata; struct samsung_pin_ctrl *ctrl = d->ctrl; - struct exynos_geint_data *edata = irq_data_get_irq_handler_data(irqd); - struct samsung_pin_bank *bank = edata->bank; - unsigned int shift = EXYNOS_EINT_CON_LEN * edata->pin; + unsigned int pin = irqd->hwirq; + unsigned int shift = EXYNOS_EINT_CON_LEN * pin; unsigned int con, trig_type; - unsigned long reg_con = ctrl->geint_con + edata->eint_offset; + unsigned long reg_con = ctrl->geint_con + bank->eint_offset; unsigned int mask; switch (type) { @@ -115,7 +115,7 @@ static int exynos_gpio_irq_set_type(struct irq_data *irqd, unsigned int type) writel(con, d->virt_base + reg_con); reg_con = bank->pctl_offset; - shift = edata->pin * bank->func_width; + shift = pin * bank->func_width; mask = (1 << bank->func_width) - 1; con = readl(d->virt_base + reg_con); @@ -137,82 +137,23 @@ static struct irq_chip exynos_gpio_irq_chip = { .irq_set_type = exynos_gpio_irq_set_type, }; -/* - * given a controller-local external gpio interrupt number, prepare the handler - * data for it. - */ -static struct exynos_geint_data *exynos_get_eint_data(irq_hw_number_t hw, - struct samsung_pinctrl_drv_data *d) -{ - struct samsung_pin_bank *bank = d->ctrl->pin_banks; - struct exynos_geint_data *eint_data; - unsigned int nr_banks = d->ctrl->nr_banks, idx; - unsigned int irq_base = 0, eint_offset = 0; - - if (hw >= d->ctrl->nr_gint) { - dev_err(d->dev, "unsupported ext-gpio interrupt\n"); - return NULL; - } - - for (idx = 0; idx < nr_banks; idx++, bank++) { - if (bank->eint_type != EINT_TYPE_GPIO) - continue; - if ((hw >= irq_base) && (hw < (irq_base + bank->nr_pins))) - break; - irq_base += bank->nr_pins; - eint_offset += 4; - } - - if (idx == nr_banks) { - dev_err(d->dev, "pin bank not found for ext-gpio interrupt\n"); - return NULL; - } - - eint_data = devm_kzalloc(d->dev, sizeof(*eint_data), GFP_KERNEL); - if (!eint_data) { - dev_err(d->dev, "no memory for eint-gpio data\n"); - return NULL; - } - - eint_data->bank = bank; - eint_data->pin = hw - irq_base; - eint_data->eint_offset = eint_offset; - return eint_data; -} - static int exynos_gpio_irq_map(struct irq_domain *h, unsigned int virq, irq_hw_number_t hw) { - struct samsung_pinctrl_drv_data *d = h->host_data; - struct exynos_geint_data *eint_data; - - eint_data = exynos_get_eint_data(hw, d); - if (!eint_data) - return -EINVAL; + struct samsung_pin_bank *b = h->host_data; - irq_set_handler_data(virq, eint_data); - irq_set_chip_data(virq, h->host_data); + irq_set_chip_data(virq, b); irq_set_chip_and_handler(virq, &exynos_gpio_irq_chip, handle_level_irq); set_irq_flags(virq, IRQF_VALID); return 0; } -static void exynos_gpio_irq_unmap(struct irq_domain *h, unsigned int virq) -{ - struct samsung_pinctrl_drv_data *d = h->host_data; - struct exynos_geint_data *eint_data; - - eint_data = irq_get_handler_data(virq); - devm_kfree(d->dev, eint_data); -} - /* * irq domain callbacks for external gpio interrupt controller. */ static const struct irq_domain_ops exynos_gpio_irqd_ops = { .map = exynos_gpio_irq_map, - .unmap = exynos_gpio_irq_unmap, .xlate = irq_domain_xlate_twocell, }; @@ -231,7 +172,7 @@ static irqreturn_t exynos_eint_gpio_irq(int irq, void *data) return IRQ_HANDLED; bank += (group - 1); - virq = irq_linear_revmap(d->gpio_irqd, bank->irq_base + pin); + virq = irq_linear_revmap(bank->irq_domain, pin); if (!virq) return IRQ_NONE; generic_handle_irq(virq); @@ -244,8 +185,10 @@ static irqreturn_t exynos_eint_gpio_irq(int irq, void *data) */ static int exynos_eint_gpio_init(struct samsung_pinctrl_drv_data *d) { + struct samsung_pin_bank *bank; struct device *dev = d->dev; unsigned int ret; + unsigned int i; if (!d->irq) { dev_err(dev, "irq number not available\n"); @@ -259,11 +202,16 @@ static int exynos_eint_gpio_init(struct samsung_pinctrl_drv_data *d) return -ENXIO; } - d->gpio_irqd = irq_domain_add_linear(dev->of_node, d->ctrl->nr_gint, - &exynos_gpio_irqd_ops, d); - if (!d->gpio_irqd) { - dev_err(dev, "gpio irq domain allocation failed\n"); - return -ENXIO; + bank = d->ctrl->pin_banks; + for (i = 0; i < d->ctrl->nr_banks; ++i, ++bank) { + if (bank->eint_type != EINT_TYPE_GPIO) + continue; + bank->irq_domain = irq_domain_add_linear(bank->of_node, + bank->nr_pins, &exynos_gpio_irqd_ops, bank); + if (!bank->irq_domain) { + dev_err(dev, "gpio irq domain add failed\n"); + return -ENXIO; + } } return 0; @@ -271,48 +219,46 @@ static int exynos_eint_gpio_init(struct samsung_pinctrl_drv_data *d) static void exynos_wkup_irq_unmask(struct irq_data *irqd) { - struct samsung_pinctrl_drv_data *d = irq_data_get_irq_chip_data(irqd); - unsigned int bank = irqd->hwirq / EXYNOS_EINT_MAX_PER_BANK; - unsigned int pin = irqd->hwirq & (EXYNOS_EINT_MAX_PER_BANK - 1); - unsigned long reg_mask = d->ctrl->weint_mask + (bank << 2); + struct samsung_pin_bank *b = irq_data_get_irq_chip_data(irqd); + struct samsung_pinctrl_drv_data *d = b->drvdata; + unsigned long reg_mask = d->ctrl->weint_mask + b->eint_offset; unsigned long mask; mask = readl(d->virt_base + reg_mask); - mask &= ~(1 << pin); + mask &= ~(1 << irqd->hwirq); writel(mask, d->virt_base + reg_mask); } static void exynos_wkup_irq_mask(struct irq_data *irqd) { - struct samsung_pinctrl_drv_data *d = irq_data_get_irq_chip_data(irqd); - unsigned int bank = irqd->hwirq / EXYNOS_EINT_MAX_PER_BANK; - unsigned int pin = irqd->hwirq & (EXYNOS_EINT_MAX_PER_BANK - 1); - unsigned long reg_mask = d->ctrl->weint_mask + (bank << 2); + struct samsung_pin_bank *b = irq_data_get_irq_chip_data(irqd); + struct samsung_pinctrl_drv_data *d = b->drvdata; + unsigned long reg_mask = d->ctrl->weint_mask + b->eint_offset; unsigned long mask; mask = readl(d->virt_base + reg_mask); - mask |= 1 << pin; + mask |= 1 << irqd->hwirq; writel(mask, d->virt_base + reg_mask); } static void exynos_wkup_irq_ack(struct irq_data *irqd) { - struct samsung_pinctrl_drv_data *d = irq_data_get_irq_chip_data(irqd); - unsigned int bank = irqd->hwirq / EXYNOS_EINT_MAX_PER_BANK; - unsigned int pin = irqd->hwirq & (EXYNOS_EINT_MAX_PER_BANK - 1); - unsigned long pend = d->ctrl->weint_pend + (bank << 2); + struct samsung_pin_bank *b = irq_data_get_irq_chip_data(irqd); + struct samsung_pinctrl_drv_data *d = b->drvdata; + unsigned long pend = d->ctrl->weint_pend + b->eint_offset; - writel(1 << pin, d->virt_base + pend); + writel(1 << irqd->hwirq, d->virt_base + pend); } static int exynos_wkup_irq_set_type(struct irq_data *irqd, unsigned int type) { - struct samsung_pinctrl_drv_data *d = irq_data_get_irq_chip_data(irqd); - unsigned int bank = irqd->hwirq / EXYNOS_EINT_MAX_PER_BANK; - unsigned int pin = irqd->hwirq & (EXYNOS_EINT_MAX_PER_BANK - 1); - unsigned long reg_con = d->ctrl->weint_con + (bank << 2); + struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd); + struct samsung_pinctrl_drv_data *d = bank->drvdata; + unsigned int pin = irqd->hwirq; + unsigned long reg_con = d->ctrl->weint_con + bank->eint_offset; unsigned long shift = EXYNOS_EINT_CON_LEN * pin; unsigned long con, trig_type; + unsigned int mask; switch (type) { case IRQ_TYPE_EDGE_RISING: @@ -344,6 +290,16 @@ static int exynos_wkup_irq_set_type(struct irq_data *irqd, unsigned int type) con &= ~(EXYNOS_EINT_CON_MASK << shift); con |= trig_type << shift; writel(con, d->virt_base + reg_con); + + reg_con = bank->pctl_offset; + shift = pin * bank->func_width; + mask = (1 << bank->func_width) - 1; + + con = readl(d->virt_base + reg_con); + con &= ~(mask << shift); + con |= EXYNOS_EINT_FUNC << shift; + writel(con, d->virt_base + reg_con); + return 0; } @@ -362,6 +318,7 @@ static struct irq_chip exynos_wkup_irq_chip = { static void exynos_irq_eint0_15(unsigned int irq, struct irq_desc *desc) { struct exynos_weint_data *eintd = irq_get_handler_data(irq); + struct samsung_pin_bank *bank = eintd->bank; struct irq_chip *chip = irq_get_chip(irq); int eint_irq; @@ -371,20 +328,20 @@ static void exynos_irq_eint0_15(unsigned int irq, struct irq_desc *desc) if (chip->irq_ack) chip->irq_ack(&desc->irq_data); - eint_irq = irq_linear_revmap(eintd->domain, eintd->irq); + eint_irq = irq_linear_revmap(bank->irq_domain, eintd->irq); generic_handle_irq(eint_irq); chip->irq_unmask(&desc->irq_data); chained_irq_exit(chip, desc); } -static inline void exynos_irq_demux_eint(int irq_base, unsigned long pend, - struct irq_domain *domain) +static inline void exynos_irq_demux_eint(unsigned long pend, + struct irq_domain *domain) { unsigned int irq; while (pend) { irq = fls(pend) - 1; - generic_handle_irq(irq_find_mapping(domain, irq_base + irq)); + generic_handle_irq(irq_find_mapping(domain, irq)); pend &= ~(1 << irq); } } @@ -393,18 +350,22 @@ static inline void exynos_irq_demux_eint(int irq_base, unsigned long pend, static void exynos_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc) { struct irq_chip *chip = irq_get_chip(irq); - struct exynos_weint_data *eintd = irq_get_handler_data(irq); - struct samsung_pinctrl_drv_data *d = eintd->domain->host_data; + struct exynos_muxed_weint_data *eintd = irq_get_handler_data(irq); + struct samsung_pinctrl_drv_data *d = eintd->banks[0]->drvdata; + struct samsung_pin_ctrl *ctrl = d->ctrl; unsigned long pend; unsigned long mask; + int i; chained_irq_enter(chip, desc); - pend = readl(d->virt_base + d->ctrl->weint_pend + 0x8); - mask = readl(d->virt_base + d->ctrl->weint_mask + 0x8); - exynos_irq_demux_eint(16, pend & ~mask, eintd->domain); - pend = readl(d->virt_base + d->ctrl->weint_pend + 0xC); - mask = readl(d->virt_base + d->ctrl->weint_mask + 0xC); - exynos_irq_demux_eint(24, pend & ~mask, eintd->domain); + + for (i = 0; i < eintd->nr_banks; ++i) { + struct samsung_pin_bank *b = eintd->banks[i]; + pend = readl(d->virt_base + ctrl->weint_pend + b->eint_offset); + mask = readl(d->virt_base + ctrl->weint_mask + b->eint_offset); + exynos_irq_demux_eint(pend & ~mask, b->irq_domain); + } + chained_irq_exit(chip, desc); } @@ -434,7 +395,11 @@ static int exynos_eint_wkup_init(struct samsung_pinctrl_drv_data *d) struct device *dev = d->dev; struct device_node *wkup_np = NULL; struct device_node *np; + struct samsung_pin_bank *bank; struct exynos_weint_data *weint_data; + struct exynos_muxed_weint_data *muxed_data; + unsigned int muxed_banks = 0; + unsigned int i; int idx, irq; for_each_child_of_node(dev->of_node, np) { @@ -446,90 +411,124 @@ static int exynos_eint_wkup_init(struct samsung_pinctrl_drv_data *d) if (!wkup_np) return -ENODEV; - d->wkup_irqd = irq_domain_add_linear(wkup_np, d->ctrl->nr_wint, - &exynos_wkup_irqd_ops, d); - if (!d->wkup_irqd) { - dev_err(dev, "wakeup irq domain allocation failed\n"); - return -ENXIO; - } + bank = d->ctrl->pin_banks; + for (i = 0; i < d->ctrl->nr_banks; ++i, ++bank) { + if (bank->eint_type != EINT_TYPE_WKUP) + continue; - weint_data = devm_kzalloc(dev, sizeof(*weint_data) * 17, GFP_KERNEL); - if (!weint_data) { - dev_err(dev, "could not allocate memory for weint_data\n"); - return -ENOMEM; - } + bank->irq_domain = irq_domain_add_linear(bank->of_node, + bank->nr_pins, &exynos_wkup_irqd_ops, bank); + if (!bank->irq_domain) { + dev_err(dev, "wkup irq domain add failed\n"); + return -ENXIO; + } - irq = irq_of_parse_and_map(wkup_np, 16); - if (irq) { - weint_data[16].domain = d->wkup_irqd; - irq_set_chained_handler(irq, exynos_irq_demux_eint16_31); - irq_set_handler_data(irq, &weint_data[16]); - } else { - dev_err(dev, "irq number for EINT16-32 not found\n"); - } + if (!of_find_property(bank->of_node, "interrupts", NULL)) { + bank->eint_type = EINT_TYPE_WKUP_MUX; + ++muxed_banks; + continue; + } - for (idx = 0; idx < 16; idx++) { - weint_data[idx].domain = d->wkup_irqd; - weint_data[idx].irq = idx; + weint_data = devm_kzalloc(dev, bank->nr_pins + * sizeof(*weint_data), GFP_KERNEL); + if (!weint_data) { + dev_err(dev, "could not allocate memory for weint_data\n"); + return -ENOMEM; + } - irq = irq_of_parse_and_map(wkup_np, idx); - if (irq) { + for (idx = 0; idx < bank->nr_pins; ++idx) { + irq = irq_of_parse_and_map(bank->of_node, idx); + if (!irq) { + dev_err(dev, "irq number for eint-%s-%d not found\n", + bank->name, idx); + continue; + } + weint_data[idx].irq = idx; + weint_data[idx].bank = bank; irq_set_handler_data(irq, &weint_data[idx]); irq_set_chained_handler(irq, exynos_irq_eint0_15); - } else { - dev_err(dev, "irq number for eint-%x not found\n", idx); } } + + if (!muxed_banks) + return 0; + + irq = irq_of_parse_and_map(wkup_np, 0); + if (!irq) { + dev_err(dev, "irq number for muxed EINTs not found\n"); + return 0; + } + + muxed_data = devm_kzalloc(dev, sizeof(*muxed_data) + + muxed_banks*sizeof(struct samsung_pin_bank *), GFP_KERNEL); + if (!muxed_data) { + dev_err(dev, "could not allocate memory for muxed_data\n"); + return -ENOMEM; + } + + irq_set_chained_handler(irq, exynos_irq_demux_eint16_31); + irq_set_handler_data(irq, muxed_data); + + bank = d->ctrl->pin_banks; + idx = 0; + for (i = 0; i < d->ctrl->nr_banks; ++i, ++bank) { + if (bank->eint_type != EINT_TYPE_WKUP_MUX) + continue; + + muxed_data->banks[idx++] = bank; + } + muxed_data->nr_banks = muxed_banks; + return 0; } /* pin banks of exynos4210 pin-controller 0 */ static struct samsung_pin_bank exynos4210_pin_banks0[] = { - EXYNOS_PIN_BANK_EINTG(0x000, EXYNOS4210_GPIO_A0, "gpa0"), - EXYNOS_PIN_BANK_EINTG(0x020, EXYNOS4210_GPIO_A1, "gpa1"), - EXYNOS_PIN_BANK_EINTG(0x040, EXYNOS4210_GPIO_B, "gpb"), - EXYNOS_PIN_BANK_EINTG(0x060, EXYNOS4210_GPIO_C0, "gpc0"), - EXYNOS_PIN_BANK_EINTG(0x080, EXYNOS4210_GPIO_C1, "gpc1"), - EXYNOS_PIN_BANK_EINTG(0x0A0, EXYNOS4210_GPIO_D0, "gpd0"), - EXYNOS_PIN_BANK_EINTG(0x0C0, EXYNOS4210_GPIO_D1, "gpd1"), - EXYNOS_PIN_BANK_EINTG(0x0E0, EXYNOS4210_GPIO_E0, "gpe0"), - EXYNOS_PIN_BANK_EINTG(0x100, EXYNOS4210_GPIO_E1, "gpe1"), - EXYNOS_PIN_BANK_EINTG(0x120, EXYNOS4210_GPIO_E2, "gpe2"), - EXYNOS_PIN_BANK_EINTG(0x140, EXYNOS4210_GPIO_E3, "gpe3"), - EXYNOS_PIN_BANK_EINTG(0x160, EXYNOS4210_GPIO_E4, "gpe4"), - EXYNOS_PIN_BANK_EINTG(0x180, EXYNOS4210_GPIO_F0, "gpf0"), - EXYNOS_PIN_BANK_EINTG(0x1A0, EXYNOS4210_GPIO_F1, "gpf1"), - EXYNOS_PIN_BANK_EINTG(0x1C0, EXYNOS4210_GPIO_F2, "gpf2"), - EXYNOS_PIN_BANK_EINTG(0x1E0, EXYNOS4210_GPIO_F3, "gpf3"), + EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpa0", 0x00), + EXYNOS_PIN_BANK_EINTG(6, 0x020, "gpa1", 0x04), + EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpb", 0x08), + EXYNOS_PIN_BANK_EINTG(5, 0x060, "gpc0", 0x0c), + EXYNOS_PIN_BANK_EINTG(5, 0x080, "gpc1", 0x10), + EXYNOS_PIN_BANK_EINTG(4, 0x0A0, "gpd0", 0x14), + EXYNOS_PIN_BANK_EINTG(4, 0x0C0, "gpd1", 0x18), + EXYNOS_PIN_BANK_EINTG(5, 0x0E0, "gpe0", 0x1c), + EXYNOS_PIN_BANK_EINTG(8, 0x100, "gpe1", 0x20), + EXYNOS_PIN_BANK_EINTG(6, 0x120, "gpe2", 0x24), + EXYNOS_PIN_BANK_EINTG(8, 0x140, "gpe3", 0x28), + EXYNOS_PIN_BANK_EINTG(8, 0x160, "gpe4", 0x2c), + EXYNOS_PIN_BANK_EINTG(8, 0x180, "gpf0", 0x30), + EXYNOS_PIN_BANK_EINTG(8, 0x1A0, "gpf1", 0x34), + EXYNOS_PIN_BANK_EINTG(8, 0x1C0, "gpf2", 0x38), + EXYNOS_PIN_BANK_EINTG(6, 0x1E0, "gpf3", 0x3c), }; /* pin banks of exynos4210 pin-controller 1 */ static struct samsung_pin_bank exynos4210_pin_banks1[] = { - EXYNOS_PIN_BANK_EINTG(0x000, EXYNOS4210_GPIO_J0, "gpj0"), - EXYNOS_PIN_BANK_EINTG(0x020, EXYNOS4210_GPIO_J1, "gpj1"), - EXYNOS_PIN_BANK_EINTG(0x040, EXYNOS4210_GPIO_K0, "gpk0"), - EXYNOS_PIN_BANK_EINTG(0x060, EXYNOS4210_GPIO_K1, "gpk1"), - EXYNOS_PIN_BANK_EINTG(0x080, EXYNOS4210_GPIO_K2, "gpk2"), - EXYNOS_PIN_BANK_EINTG(0x0A0, EXYNOS4210_GPIO_K3, "gpk3"), - EXYNOS_PIN_BANK_EINTG(0x0C0, EXYNOS4210_GPIO_L0, "gpl0"), - EXYNOS_PIN_BANK_EINTG(0x0E0, EXYNOS4210_GPIO_L1, "gpl1"), - EXYNOS_PIN_BANK_EINTG(0x100, EXYNOS4210_GPIO_L2, "gpl2"), - EXYNOS_PIN_BANK_EINTN(0x120, EXYNOS4210_GPIO_Y0, "gpy0"), - EXYNOS_PIN_BANK_EINTN(0x140, EXYNOS4210_GPIO_Y1, "gpy1"), - EXYNOS_PIN_BANK_EINTN(0x160, EXYNOS4210_GPIO_Y2, "gpy2"), - EXYNOS_PIN_BANK_EINTN(0x180, EXYNOS4210_GPIO_Y3, "gpy3"), - EXYNOS_PIN_BANK_EINTN(0x1A0, EXYNOS4210_GPIO_Y4, "gpy4"), - EXYNOS_PIN_BANK_EINTN(0x1C0, EXYNOS4210_GPIO_Y5, "gpy5"), - EXYNOS_PIN_BANK_EINTN(0x1E0, EXYNOS4210_GPIO_Y6, "gpy6"), - EXYNOS_PIN_BANK_EINTN(0xC00, EXYNOS4210_GPIO_X0, "gpx0"), - EXYNOS_PIN_BANK_EINTN(0xC20, EXYNOS4210_GPIO_X1, "gpx1"), - EXYNOS_PIN_BANK_EINTN(0xC40, EXYNOS4210_GPIO_X2, "gpx2"), - EXYNOS_PIN_BANK_EINTN(0xC60, EXYNOS4210_GPIO_X3, "gpx3"), + EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpj0", 0x00), + EXYNOS_PIN_BANK_EINTG(5, 0x020, "gpj1", 0x04), + EXYNOS_PIN_BANK_EINTG(7, 0x040, "gpk0", 0x08), + EXYNOS_PIN_BANK_EINTG(7, 0x060, "gpk1", 0x0c), + EXYNOS_PIN_BANK_EINTG(7, 0x080, "gpk2", 0x10), + EXYNOS_PIN_BANK_EINTG(7, 0x0A0, "gpk3", 0x14), + EXYNOS_PIN_BANK_EINTG(8, 0x0C0, "gpl0", 0x18), + EXYNOS_PIN_BANK_EINTG(3, 0x0E0, "gpl1", 0x1c), + EXYNOS_PIN_BANK_EINTG(8, 0x100, "gpl2", 0x20), + EXYNOS_PIN_BANK_EINTN(6, 0x120, "gpy0"), + EXYNOS_PIN_BANK_EINTN(4, 0x140, "gpy1"), + EXYNOS_PIN_BANK_EINTN(6, 0x160, "gpy2"), + EXYNOS_PIN_BANK_EINTN(8, 0x180, "gpy3"), + EXYNOS_PIN_BANK_EINTN(8, 0x1A0, "gpy4"), + EXYNOS_PIN_BANK_EINTN(8, 0x1C0, "gpy5"), + EXYNOS_PIN_BANK_EINTN(8, 0x1E0, "gpy6"), + EXYNOS_PIN_BANK_EINTW(8, 0xC00, "gpx0", 0x00), + EXYNOS_PIN_BANK_EINTW(8, 0xC20, "gpx1", 0x04), + EXYNOS_PIN_BANK_EINTW(8, 0xC40, "gpx2", 0x08), + EXYNOS_PIN_BANK_EINTW(8, 0xC60, "gpx3", 0x0c), }; /* pin banks of exynos4210 pin-controller 2 */ static struct samsung_pin_bank exynos4210_pin_banks2[] = { - EXYNOS_PIN_BANK_EINTN(0x000, EXYNOS4210_GPIO_Z, "gpz"), + EXYNOS_PIN_BANK_EINTN(7, 0x000, "gpz"), }; /* @@ -541,9 +540,6 @@ struct samsung_pin_ctrl exynos4210_pin_ctrl[] = { /* pin-controller instance 0 data */ .pin_banks = exynos4210_pin_banks0, .nr_banks = ARRAY_SIZE(exynos4210_pin_banks0), - .base = EXYNOS4210_GPIO_A0_START, - .nr_pins = EXYNOS4210_GPIOA_NR_PINS, - .nr_gint = EXYNOS4210_GPIOA_NR_GINT, .geint_con = EXYNOS_GPIO_ECON_OFFSET, .geint_mask = EXYNOS_GPIO_EMASK_OFFSET, .geint_pend = EXYNOS_GPIO_EPEND_OFFSET, @@ -554,10 +550,6 @@ struct samsung_pin_ctrl exynos4210_pin_ctrl[] = { /* pin-controller instance 1 data */ .pin_banks = exynos4210_pin_banks1, .nr_banks = ARRAY_SIZE(exynos4210_pin_banks1), - .base = EXYNOS4210_GPIOA_NR_PINS, - .nr_pins = EXYNOS4210_GPIOB_NR_PINS, - .nr_gint = EXYNOS4210_GPIOB_NR_GINT, - .nr_wint = 32, .geint_con = EXYNOS_GPIO_ECON_OFFSET, .geint_mask = EXYNOS_GPIO_EMASK_OFFSET, .geint_pend = EXYNOS_GPIO_EPEND_OFFSET, @@ -572,9 +564,116 @@ struct samsung_pin_ctrl exynos4210_pin_ctrl[] = { /* pin-controller instance 2 data */ .pin_banks = exynos4210_pin_banks2, .nr_banks = ARRAY_SIZE(exynos4210_pin_banks2), - .base = EXYNOS4210_GPIOA_NR_PINS + - EXYNOS4210_GPIOB_NR_PINS, - .nr_pins = EXYNOS4210_GPIOC_NR_PINS, .label = "exynos4210-gpio-ctrl2", }, }; + +/* pin banks of exynos4x12 pin-controller 0 */ +static struct samsung_pin_bank exynos4x12_pin_banks0[] = { + EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpa0", 0x00), + EXYNOS_PIN_BANK_EINTG(6, 0x020, "gpa1", 0x04), + EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpb", 0x08), + EXYNOS_PIN_BANK_EINTG(5, 0x060, "gpc0", 0x0c), + EXYNOS_PIN_BANK_EINTG(5, 0x080, "gpc1", 0x10), + EXYNOS_PIN_BANK_EINTG(4, 0x0A0, "gpd0", 0x14), + EXYNOS_PIN_BANK_EINTG(4, 0x0C0, "gpd1", 0x18), + EXYNOS_PIN_BANK_EINTG(8, 0x180, "gpf0", 0x30), + EXYNOS_PIN_BANK_EINTG(8, 0x1A0, "gpf1", 0x34), + EXYNOS_PIN_BANK_EINTG(8, 0x1C0, "gpf2", 0x38), + EXYNOS_PIN_BANK_EINTG(6, 0x1E0, "gpf3", 0x3c), + EXYNOS_PIN_BANK_EINTG(8, 0x240, "gpj0", 0x40), + EXYNOS_PIN_BANK_EINTG(5, 0x260, "gpj1", 0x44), +}; + +/* pin banks of exynos4x12 pin-controller 1 */ +static struct samsung_pin_bank exynos4x12_pin_banks1[] = { + EXYNOS_PIN_BANK_EINTG(7, 0x040, "gpk0", 0x08), + EXYNOS_PIN_BANK_EINTG(7, 0x060, "gpk1", 0x0c), + EXYNOS_PIN_BANK_EINTG(7, 0x080, "gpk2", 0x10), + EXYNOS_PIN_BANK_EINTG(7, 0x0A0, "gpk3", 0x14), + EXYNOS_PIN_BANK_EINTG(7, 0x0C0, "gpl0", 0x18), + EXYNOS_PIN_BANK_EINTG(2, 0x0E0, "gpl1", 0x1c), + EXYNOS_PIN_BANK_EINTG(8, 0x100, "gpl2", 0x20), + EXYNOS_PIN_BANK_EINTG(8, 0x260, "gpm0", 0x24), + EXYNOS_PIN_BANK_EINTG(7, 0x280, "gpm1", 0x28), + EXYNOS_PIN_BANK_EINTG(5, 0x2A0, "gpm2", 0x2c), + EXYNOS_PIN_BANK_EINTG(8, 0x2C0, "gpm3", 0x30), + EXYNOS_PIN_BANK_EINTG(8, 0x2E0, "gpm4", 0x34), + EXYNOS_PIN_BANK_EINTN(6, 0x120, "gpy0"), + EXYNOS_PIN_BANK_EINTN(4, 0x140, "gpy1"), + EXYNOS_PIN_BANK_EINTN(6, 0x160, "gpy2"), + EXYNOS_PIN_BANK_EINTN(8, 0x180, "gpy3"), + EXYNOS_PIN_BANK_EINTN(8, 0x1A0, "gpy4"), + EXYNOS_PIN_BANK_EINTN(8, 0x1C0, "gpy5"), + EXYNOS_PIN_BANK_EINTN(8, 0x1E0, "gpy6"), + EXYNOS_PIN_BANK_EINTW(8, 0xC00, "gpx0", 0x00), + EXYNOS_PIN_BANK_EINTW(8, 0xC20, "gpx1", 0x04), + EXYNOS_PIN_BANK_EINTW(8, 0xC40, "gpx2", 0x08), + EXYNOS_PIN_BANK_EINTW(8, 0xC60, "gpx3", 0x0c), +}; + +/* pin banks of exynos4x12 pin-controller 2 */ +static struct samsung_pin_bank exynos4x12_pin_banks2[] = { + EXYNOS_PIN_BANK_EINTG(7, 0x000, "gpz", 0x00), +}; + +/* pin banks of exynos4x12 pin-controller 3 */ +static struct samsung_pin_bank exynos4x12_pin_banks3[] = { + EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpv0", 0x00), + EXYNOS_PIN_BANK_EINTG(8, 0x020, "gpv1", 0x04), + EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpv2", 0x08), + EXYNOS_PIN_BANK_EINTG(8, 0x060, "gpv3", 0x0c), + EXYNOS_PIN_BANK_EINTG(2, 0x080, "gpv4", 0x10), +}; + +/* + * Samsung pinctrl driver data for Exynos4x12 SoC. Exynos4x12 SoC includes + * four gpio/pin-mux/pinconfig controllers. + */ +struct samsung_pin_ctrl exynos4x12_pin_ctrl[] = { + { + /* pin-controller instance 0 data */ + .pin_banks = exynos4x12_pin_banks0, + .nr_banks = ARRAY_SIZE(exynos4x12_pin_banks0), + .geint_con = EXYNOS_GPIO_ECON_OFFSET, + .geint_mask = EXYNOS_GPIO_EMASK_OFFSET, + .geint_pend = EXYNOS_GPIO_EPEND_OFFSET, + .svc = EXYNOS_SVC_OFFSET, + .eint_gpio_init = exynos_eint_gpio_init, + .label = "exynos4x12-gpio-ctrl0", + }, { + /* pin-controller instance 1 data */ + .pin_banks = exynos4x12_pin_banks1, + .nr_banks = ARRAY_SIZE(exynos4x12_pin_banks1), + .geint_con = EXYNOS_GPIO_ECON_OFFSET, + .geint_mask = EXYNOS_GPIO_EMASK_OFFSET, + .geint_pend = EXYNOS_GPIO_EPEND_OFFSET, + .weint_con = EXYNOS_WKUP_ECON_OFFSET, + .weint_mask = EXYNOS_WKUP_EMASK_OFFSET, + .weint_pend = EXYNOS_WKUP_EPEND_OFFSET, + .svc = EXYNOS_SVC_OFFSET, + .eint_gpio_init = exynos_eint_gpio_init, + .eint_wkup_init = exynos_eint_wkup_init, + .label = "exynos4x12-gpio-ctrl1", + }, { + /* pin-controller instance 2 data */ + .pin_banks = exynos4x12_pin_banks2, + .nr_banks = ARRAY_SIZE(exynos4x12_pin_banks2), + .geint_con = EXYNOS_GPIO_ECON_OFFSET, + .geint_mask = EXYNOS_GPIO_EMASK_OFFSET, + .geint_pend = EXYNOS_GPIO_EPEND_OFFSET, + .svc = EXYNOS_SVC_OFFSET, + .eint_gpio_init = exynos_eint_gpio_init, + .label = "exynos4x12-gpio-ctrl2", + }, { + /* pin-controller instance 3 data */ + .pin_banks = exynos4x12_pin_banks3, + .nr_banks = ARRAY_SIZE(exynos4x12_pin_banks3), + .geint_con = EXYNOS_GPIO_ECON_OFFSET, + .geint_mask = EXYNOS_GPIO_EMASK_OFFSET, + .geint_pend = EXYNOS_GPIO_EPEND_OFFSET, + .svc = EXYNOS_SVC_OFFSET, + .eint_gpio_init = exynos_eint_gpio_init, + .label = "exynos4x12-gpio-ctrl3", + }, +}; diff --git a/drivers/pinctrl/pinctrl-exynos.h b/drivers/pinctrl/pinctrl-exynos.h index 31d0a06174e..0a708890d8b 100644 --- a/drivers/pinctrl/pinctrl-exynos.h +++ b/drivers/pinctrl/pinctrl-exynos.h @@ -17,125 +17,6 @@ * (at your option) any later version. */ -#define EXYNOS_GPIO_START(__gpio) ((__gpio##_START) + (__gpio##_NR)) - -#define EXYNOS4210_GPIO_A0_NR (8) -#define EXYNOS4210_GPIO_A1_NR (6) -#define EXYNOS4210_GPIO_B_NR (8) -#define EXYNOS4210_GPIO_C0_NR (5) -#define EXYNOS4210_GPIO_C1_NR (5) -#define EXYNOS4210_GPIO_D0_NR (4) -#define EXYNOS4210_GPIO_D1_NR (4) -#define EXYNOS4210_GPIO_E0_NR (5) -#define EXYNOS4210_GPIO_E1_NR (8) -#define EXYNOS4210_GPIO_E2_NR (6) -#define EXYNOS4210_GPIO_E3_NR (8) -#define EXYNOS4210_GPIO_E4_NR (8) -#define EXYNOS4210_GPIO_F0_NR (8) -#define EXYNOS4210_GPIO_F1_NR (8) -#define EXYNOS4210_GPIO_F2_NR (8) -#define EXYNOS4210_GPIO_F3_NR (6) -#define EXYNOS4210_GPIO_J0_NR (8) -#define EXYNOS4210_GPIO_J1_NR (5) -#define EXYNOS4210_GPIO_K0_NR (7) -#define EXYNOS4210_GPIO_K1_NR (7) -#define EXYNOS4210_GPIO_K2_NR (7) -#define EXYNOS4210_GPIO_K3_NR (7) -#define EXYNOS4210_GPIO_L0_NR (8) -#define EXYNOS4210_GPIO_L1_NR (3) -#define EXYNOS4210_GPIO_L2_NR (8) -#define EXYNOS4210_GPIO_Y0_NR (6) -#define EXYNOS4210_GPIO_Y1_NR (4) -#define EXYNOS4210_GPIO_Y2_NR (6) -#define EXYNOS4210_GPIO_Y3_NR (8) -#define EXYNOS4210_GPIO_Y4_NR (8) -#define EXYNOS4210_GPIO_Y5_NR (8) -#define EXYNOS4210_GPIO_Y6_NR (8) -#define EXYNOS4210_GPIO_X0_NR (8) -#define EXYNOS4210_GPIO_X1_NR (8) -#define EXYNOS4210_GPIO_X2_NR (8) -#define EXYNOS4210_GPIO_X3_NR (8) -#define EXYNOS4210_GPIO_Z_NR (7) - -enum exynos4210_gpio_xa_start { - EXYNOS4210_GPIO_A0_START = 0, - EXYNOS4210_GPIO_A1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_A0), - EXYNOS4210_GPIO_B_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_A1), - EXYNOS4210_GPIO_C0_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_B), - EXYNOS4210_GPIO_C1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_C0), - EXYNOS4210_GPIO_D0_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_C1), - EXYNOS4210_GPIO_D1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_D0), - EXYNOS4210_GPIO_E0_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_D1), - EXYNOS4210_GPIO_E1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_E0), - EXYNOS4210_GPIO_E2_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_E1), - EXYNOS4210_GPIO_E3_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_E2), - EXYNOS4210_GPIO_E4_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_E3), - EXYNOS4210_GPIO_F0_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_E4), - EXYNOS4210_GPIO_F1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_F0), - EXYNOS4210_GPIO_F2_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_F1), - EXYNOS4210_GPIO_F3_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_F2), -}; - -enum exynos4210_gpio_xb_start { - EXYNOS4210_GPIO_J0_START = 0, - EXYNOS4210_GPIO_J1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_J0), - EXYNOS4210_GPIO_K0_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_J1), - EXYNOS4210_GPIO_K1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_K0), - EXYNOS4210_GPIO_K2_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_K1), - EXYNOS4210_GPIO_K3_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_K2), - EXYNOS4210_GPIO_L0_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_K3), - EXYNOS4210_GPIO_L1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_L0), - EXYNOS4210_GPIO_L2_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_L1), - EXYNOS4210_GPIO_Y0_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_L2), - EXYNOS4210_GPIO_Y1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_Y0), - EXYNOS4210_GPIO_Y2_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_Y1), - EXYNOS4210_GPIO_Y3_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_Y2), - EXYNOS4210_GPIO_Y4_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_Y3), - EXYNOS4210_GPIO_Y5_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_Y4), - EXYNOS4210_GPIO_Y6_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_Y5), - EXYNOS4210_GPIO_X0_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_Y6), - EXYNOS4210_GPIO_X1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_X0), - EXYNOS4210_GPIO_X2_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_X1), - EXYNOS4210_GPIO_X3_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_X2), -}; - -enum exynos4210_gpio_xc_start { - EXYNOS4210_GPIO_Z_START = 0, -}; - -#define EXYNOS4210_GPIO_A0_IRQ EXYNOS4210_GPIO_A0_START -#define EXYNOS4210_GPIO_A1_IRQ EXYNOS4210_GPIO_A1_START -#define EXYNOS4210_GPIO_B_IRQ EXYNOS4210_GPIO_B_START -#define EXYNOS4210_GPIO_C0_IRQ EXYNOS4210_GPIO_C0_START -#define EXYNOS4210_GPIO_C1_IRQ EXYNOS4210_GPIO_C1_START -#define EXYNOS4210_GPIO_D0_IRQ EXYNOS4210_GPIO_D0_START -#define EXYNOS4210_GPIO_D1_IRQ EXYNOS4210_GPIO_D1_START -#define EXYNOS4210_GPIO_E0_IRQ EXYNOS4210_GPIO_E0_START -#define EXYNOS4210_GPIO_E1_IRQ EXYNOS4210_GPIO_E1_START -#define EXYNOS4210_GPIO_E2_IRQ EXYNOS4210_GPIO_E2_START -#define EXYNOS4210_GPIO_E3_IRQ EXYNOS4210_GPIO_E3_START -#define EXYNOS4210_GPIO_E4_IRQ EXYNOS4210_GPIO_E4_START -#define EXYNOS4210_GPIO_F0_IRQ EXYNOS4210_GPIO_F0_START -#define EXYNOS4210_GPIO_F1_IRQ EXYNOS4210_GPIO_F1_START -#define EXYNOS4210_GPIO_F2_IRQ EXYNOS4210_GPIO_F2_START -#define EXYNOS4210_GPIO_F3_IRQ EXYNOS4210_GPIO_F3_START -#define EXYNOS4210_GPIO_J0_IRQ EXYNOS4210_GPIO_J0_START -#define EXYNOS4210_GPIO_J1_IRQ EXYNOS4210_GPIO_J1_START -#define EXYNOS4210_GPIO_K0_IRQ EXYNOS4210_GPIO_K0_START -#define EXYNOS4210_GPIO_K1_IRQ EXYNOS4210_GPIO_K1_START -#define EXYNOS4210_GPIO_K2_IRQ EXYNOS4210_GPIO_K2_START -#define EXYNOS4210_GPIO_K3_IRQ EXYNOS4210_GPIO_K3_START -#define EXYNOS4210_GPIO_L0_IRQ EXYNOS4210_GPIO_L0_START -#define EXYNOS4210_GPIO_L1_IRQ EXYNOS4210_GPIO_L1_START -#define EXYNOS4210_GPIO_L2_IRQ EXYNOS4210_GPIO_L2_START -#define EXYNOS4210_GPIO_Z_IRQ EXYNOS4210_GPIO_Z_START - -#define EXYNOS4210_GPIOA_NR_PINS EXYNOS_GPIO_START(EXYNOS4210_GPIO_F3) -#define EXYNOS4210_GPIOA_NR_GINT EXYNOS_GPIO_START(EXYNOS4210_GPIO_F3) -#define EXYNOS4210_GPIOB_NR_PINS EXYNOS_GPIO_START(EXYNOS4210_GPIO_X3) -#define EXYNOS4210_GPIOB_NR_GINT EXYNOS_GPIO_START(EXYNOS4210_GPIO_L2) -#define EXYNOS4210_GPIOC_NR_PINS EXYNOS_GPIO_START(EXYNOS4210_GPIO_Z) - /* External GPIO and wakeup interrupt related definitions */ #define EXYNOS_GPIO_ECON_OFFSET 0x700 #define EXYNOS_GPIO_EMASK_OFFSET 0x900 @@ -165,11 +46,10 @@ enum exynos4210_gpio_xc_start { #define EXYNOS_EINT_MAX_PER_BANK 8 #define EXYNOS_EINT_NR_WKUP_EINT -#define EXYNOS_PIN_BANK_EINTN(reg, __gpio, id) \ +#define EXYNOS_PIN_BANK_EINTN(pins, reg, id) \ { \ .pctl_offset = reg, \ - .pin_base = (__gpio##_START), \ - .nr_pins = (__gpio##_NR), \ + .nr_pins = pins, \ .func_width = 4, \ .pud_width = 2, \ .drv_width = 2, \ @@ -179,40 +59,50 @@ enum exynos4210_gpio_xc_start { .name = id \ } -#define EXYNOS_PIN_BANK_EINTG(reg, __gpio, id) \ +#define EXYNOS_PIN_BANK_EINTG(pins, reg, id, offs) \ { \ .pctl_offset = reg, \ - .pin_base = (__gpio##_START), \ - .nr_pins = (__gpio##_NR), \ + .nr_pins = pins, \ .func_width = 4, \ .pud_width = 2, \ .drv_width = 2, \ .conpdn_width = 2, \ .pudpdn_width = 2, \ .eint_type = EINT_TYPE_GPIO, \ - .irq_base = (__gpio##_IRQ), \ + .eint_offset = offs, \ .name = id \ } -/** - * struct exynos_geint_data: gpio eint specific data for irq_chip callbacks. - * @bank: pin bank from which this gpio interrupt originates. - * @pin: pin number within the bank. - * @eint_offset: offset to be added to the con/pend/mask register bank base. - */ -struct exynos_geint_data { - struct samsung_pin_bank *bank; - u32 pin; - u32 eint_offset; -}; +#define EXYNOS_PIN_BANK_EINTW(pins, reg, id, offs) \ + { \ + .pctl_offset = reg, \ + .nr_pins = pins, \ + .func_width = 4, \ + .pud_width = 2, \ + .drv_width = 2, \ + .eint_type = EINT_TYPE_WKUP, \ + .eint_offset = offs, \ + .name = id \ + } /** * struct exynos_weint_data: irq specific data for all the wakeup interrupts * generated by the external wakeup interrupt controller. - * @domain: irq domain representing the external wakeup interrupts * @irq: interrupt number within the domain. + * @bank: bank responsible for this interrupt */ struct exynos_weint_data { - struct irq_domain *domain; - u32 irq; + unsigned int irq; + struct samsung_pin_bank *bank; +}; + +/** + * struct exynos_muxed_weint_data: irq specific data for muxed wakeup interrupts + * generated by the external wakeup interrupt controller. + * @nr_banks: count of banks being part of the mux + * @banks: array of banks being part of the mux + */ +struct exynos_muxed_weint_data { + unsigned int nr_banks; + struct samsung_pin_bank *banks[]; }; diff --git a/drivers/pinctrl/pinctrl-exynos5440.c b/drivers/pinctrl/pinctrl-exynos5440.c new file mode 100644 index 00000000000..b8635f634e9 --- /dev/null +++ b/drivers/pinctrl/pinctrl-exynos5440.c @@ -0,0 +1,919 @@ +/* + * pin-controller/pin-mux/pin-config/gpio-driver for Samsung's EXYNOS5440 SoC. + * + * Copyright (c) 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/slab.h> +#include <linux/err.h> +#include <linux/gpio.h> +#include <linux/device.h> +#include <linux/pinctrl/pinctrl.h> +#include <linux/pinctrl/pinmux.h> +#include <linux/pinctrl/pinconf.h> +#include "core.h" + +/* EXYNOS5440 GPIO and Pinctrl register offsets */ +#define GPIO_MUX 0x00 +#define GPIO_IE 0x04 +#define GPIO_INT 0x08 +#define GPIO_TYPE 0x0C +#define GPIO_VAL 0x10 +#define GPIO_OE 0x14 +#define GPIO_IN 0x18 +#define GPIO_PE 0x1C +#define GPIO_PS 0x20 +#define GPIO_SR 0x24 +#define GPIO_DS0 0x28 +#define GPIO_DS1 0x2C + +#define EXYNOS5440_MAX_PINS 23 +#define PIN_NAME_LENGTH 10 + +#define GROUP_SUFFIX "-grp" +#define GSUFFIX_LEN sizeof(GROUP_SUFFIX) +#define FUNCTION_SUFFIX "-mux" +#define FSUFFIX_LEN sizeof(FUNCTION_SUFFIX) + +/* + * pin configuration type and its value are packed together into a 16-bits. + * The upper 8-bits represent the configuration type and the lower 8-bits + * hold the value of the configuration type. + */ +#define PINCFG_TYPE_MASK 0xFF +#define PINCFG_VALUE_SHIFT 8 +#define PINCFG_VALUE_MASK (0xFF << PINCFG_VALUE_SHIFT) +#define PINCFG_PACK(type, value) (((value) << PINCFG_VALUE_SHIFT) | type) +#define PINCFG_UNPACK_TYPE(cfg) ((cfg) & PINCFG_TYPE_MASK) +#define PINCFG_UNPACK_VALUE(cfg) (((cfg) & PINCFG_VALUE_MASK) >> \ + PINCFG_VALUE_SHIFT) + +/** + * enum pincfg_type - possible pin configuration types supported. + * @PINCFG_TYPE_PUD: Pull up/down configuration. + * @PINCFG_TYPE_DRV: Drive strength configuration. + * @PINCFG_TYPE_SKEW_RATE: Skew rate configuration. + * @PINCFG_TYPE_INPUT_TYPE: Pin input type configuration. + */ +enum pincfg_type { + PINCFG_TYPE_PUD, + PINCFG_TYPE_DRV, + PINCFG_TYPE_SKEW_RATE, + PINCFG_TYPE_INPUT_TYPE +}; + +/** + * struct exynos5440_pin_group: represent group of pins for pincfg setting. + * @name: name of the pin group, used to lookup the group. + * @pins: the pins included in this group. + * @num_pins: number of pins included in this group. + */ +struct exynos5440_pin_group { + const char *name; + const unsigned int *pins; + u8 num_pins; +}; + +/** + * struct exynos5440_pmx_func: represent a pin function. + * @name: name of the pin function, used to lookup the function. + * @groups: one or more names of pin groups that provide this function. + * @num_groups: number of groups included in @groups. + * @function: the function number to be programmed when selected. + */ +struct exynos5440_pmx_func { + const char *name; + const char **groups; + u8 num_groups; + unsigned long function; +}; + +/** + * struct exynos5440_pinctrl_priv_data: driver's private runtime data. + * @reg_base: ioremapped based address of the register space. + * @gc: gpio chip registered with gpiolib. + * @pin_groups: list of pin groups parsed from device tree. + * @nr_groups: number of pin groups available. + * @pmx_functions: list of pin functions parsed from device tree. + * @nr_functions: number of pin functions available. + */ +struct exynos5440_pinctrl_priv_data { + void __iomem *reg_base; + struct gpio_chip *gc; + + const struct exynos5440_pin_group *pin_groups; + unsigned int nr_groups; + const struct exynos5440_pmx_func *pmx_functions; + unsigned int nr_functions; +}; + +/* list of all possible config options supported */ +struct pin_config { + char *prop_cfg; + unsigned int cfg_type; +} pcfgs[] = { + { "samsung,exynos5440-pin-pud", PINCFG_TYPE_PUD }, + { "samsung,exynos5440-pin-drv", PINCFG_TYPE_DRV }, + { "samsung,exynos5440-pin-skew-rate", PINCFG_TYPE_SKEW_RATE }, + { "samsung,exynos5440-pin-input-type", PINCFG_TYPE_INPUT_TYPE }, +}; + +/* check if the selector is a valid pin group selector */ +static int exynos5440_get_group_count(struct pinctrl_dev *pctldev) +{ + struct exynos5440_pinctrl_priv_data *priv; + + priv = pinctrl_dev_get_drvdata(pctldev); + return priv->nr_groups; +} + +/* return the name of the group selected by the group selector */ +static const char *exynos5440_get_group_name(struct pinctrl_dev *pctldev, + unsigned selector) +{ + struct exynos5440_pinctrl_priv_data *priv; + + priv = pinctrl_dev_get_drvdata(pctldev); + return priv->pin_groups[selector].name; +} + +/* return the pin numbers associated with the specified group */ +static int exynos5440_get_group_pins(struct pinctrl_dev *pctldev, + unsigned selector, const unsigned **pins, unsigned *num_pins) +{ + struct exynos5440_pinctrl_priv_data *priv; + + priv = pinctrl_dev_get_drvdata(pctldev); + *pins = priv->pin_groups[selector].pins; + *num_pins = priv->pin_groups[selector].num_pins; + return 0; +} + +/* create pinctrl_map entries by parsing device tree nodes */ +static int exynos5440_dt_node_to_map(struct pinctrl_dev *pctldev, + struct device_node *np, struct pinctrl_map **maps, + unsigned *nmaps) +{ + struct device *dev = pctldev->dev; + struct pinctrl_map *map; + unsigned long *cfg = NULL; + char *gname, *fname; + int cfg_cnt = 0, map_cnt = 0, idx = 0; + + /* count the number of config options specfied in the node */ + for (idx = 0; idx < ARRAY_SIZE(pcfgs); idx++) + if (of_find_property(np, pcfgs[idx].prop_cfg, NULL)) + cfg_cnt++; + + /* + * Find out the number of map entries to create. All the config options + * can be accomadated into a single config map entry. + */ + if (cfg_cnt) + map_cnt = 1; + if (of_find_property(np, "samsung,exynos5440-pin-function", NULL)) + map_cnt++; + if (!map_cnt) { + dev_err(dev, "node %s does not have either config or function " + "configurations\n", np->name); + return -EINVAL; + } + + /* Allocate memory for pin-map entries */ + map = kzalloc(sizeof(*map) * map_cnt, GFP_KERNEL); + if (!map) { + dev_err(dev, "could not alloc memory for pin-maps\n"); + return -ENOMEM; + } + *nmaps = 0; + + /* + * Allocate memory for pin group name. The pin group name is derived + * from the node name from which these map entries are be created. + */ + gname = kzalloc(strlen(np->name) + GSUFFIX_LEN, GFP_KERNEL); + if (!gname) { + dev_err(dev, "failed to alloc memory for group name\n"); + goto free_map; + } + sprintf(gname, "%s%s", np->name, GROUP_SUFFIX); + + /* + * don't have config options? then skip over to creating function + * map entries. + */ + if (!cfg_cnt) + goto skip_cfgs; + + /* Allocate memory for config entries */ + cfg = kzalloc(sizeof(*cfg) * cfg_cnt, GFP_KERNEL); + if (!cfg) { + dev_err(dev, "failed to alloc memory for configs\n"); + goto free_gname; + } + + /* Prepare a list of config settings */ + for (idx = 0, cfg_cnt = 0; idx < ARRAY_SIZE(pcfgs); idx++) { + u32 value; + if (!of_property_read_u32(np, pcfgs[idx].prop_cfg, &value)) + cfg[cfg_cnt++] = + PINCFG_PACK(pcfgs[idx].cfg_type, value); + } + + /* create the config map entry */ + map[*nmaps].data.configs.group_or_pin = gname; + map[*nmaps].data.configs.configs = cfg; + map[*nmaps].data.configs.num_configs = cfg_cnt; + map[*nmaps].type = PIN_MAP_TYPE_CONFIGS_GROUP; + *nmaps += 1; + +skip_cfgs: + /* create the function map entry */ + if (of_find_property(np, "samsung,exynos5440-pin-function", NULL)) { + fname = kzalloc(strlen(np->name) + FSUFFIX_LEN, GFP_KERNEL); + if (!fname) { + dev_err(dev, "failed to alloc memory for func name\n"); + goto free_cfg; + } + sprintf(fname, "%s%s", np->name, FUNCTION_SUFFIX); + + map[*nmaps].data.mux.group = gname; + map[*nmaps].data.mux.function = fname; + map[*nmaps].type = PIN_MAP_TYPE_MUX_GROUP; + *nmaps += 1; + } + + *maps = map; + return 0; + +free_cfg: + kfree(cfg); +free_gname: + kfree(gname); +free_map: + kfree(map); + return -ENOMEM; +} + +/* free the memory allocated to hold the pin-map table */ +static void exynos5440_dt_free_map(struct pinctrl_dev *pctldev, + struct pinctrl_map *map, unsigned num_maps) +{ + int idx; + + for (idx = 0; idx < num_maps; idx++) { + if (map[idx].type == PIN_MAP_TYPE_MUX_GROUP) { + kfree(map[idx].data.mux.function); + if (!idx) + kfree(map[idx].data.mux.group); + } else if (map->type == PIN_MAP_TYPE_CONFIGS_GROUP) { + kfree(map[idx].data.configs.configs); + if (!idx) + kfree(map[idx].data.configs.group_or_pin); + } + }; + + kfree(map); +} + +/* list of pinctrl callbacks for the pinctrl core */ +static struct pinctrl_ops exynos5440_pctrl_ops = { + .get_groups_count = exynos5440_get_group_count, + .get_group_name = exynos5440_get_group_name, + .get_group_pins = exynos5440_get_group_pins, + .dt_node_to_map = exynos5440_dt_node_to_map, + .dt_free_map = exynos5440_dt_free_map, +}; + +/* check if the selector is a valid pin function selector */ +static int exynos5440_get_functions_count(struct pinctrl_dev *pctldev) +{ + struct exynos5440_pinctrl_priv_data *priv; + + priv = pinctrl_dev_get_drvdata(pctldev); + return priv->nr_functions; +} + +/* return the name of the pin function specified */ +static const char *exynos5440_pinmux_get_fname(struct pinctrl_dev *pctldev, + unsigned selector) +{ + struct exynos5440_pinctrl_priv_data *priv; + + priv = pinctrl_dev_get_drvdata(pctldev); + return priv->pmx_functions[selector].name; +} + +/* return the groups associated for the specified function selector */ +static int exynos5440_pinmux_get_groups(struct pinctrl_dev *pctldev, + unsigned selector, const char * const **groups, + unsigned * const num_groups) +{ + struct exynos5440_pinctrl_priv_data *priv; + + priv = pinctrl_dev_get_drvdata(pctldev); + *groups = priv->pmx_functions[selector].groups; + *num_groups = priv->pmx_functions[selector].num_groups; + return 0; +} + +/* enable or disable a pinmux function */ +static void exynos5440_pinmux_setup(struct pinctrl_dev *pctldev, unsigned selector, + unsigned group, bool enable) +{ + struct exynos5440_pinctrl_priv_data *priv; + void __iomem *base; + u32 function; + u32 data; + + priv = pinctrl_dev_get_drvdata(pctldev); + base = priv->reg_base; + function = priv->pmx_functions[selector].function; + + data = readl(base + GPIO_MUX); + if (enable) + data |= (1 << function); + else + data &= ~(1 << function); + writel(data, base + GPIO_MUX); +} + +/* enable a specified pinmux by writing to registers */ +static int exynos5440_pinmux_enable(struct pinctrl_dev *pctldev, unsigned selector, + unsigned group) +{ + exynos5440_pinmux_setup(pctldev, selector, group, true); + return 0; +} + +/* disable a specified pinmux by writing to registers */ +static void exynos5440_pinmux_disable(struct pinctrl_dev *pctldev, + unsigned selector, unsigned group) +{ + exynos5440_pinmux_setup(pctldev, selector, group, false); +} + +/* + * The calls to gpio_direction_output() and gpio_direction_input() + * leads to this function call (via the pinctrl_gpio_direction_{input|output}() + * function called from the gpiolib interface). + */ +static int exynos5440_pinmux_gpio_set_direction(struct pinctrl_dev *pctldev, + struct pinctrl_gpio_range *range, unsigned offset, bool input) +{ + return 0; +} + +/* list of pinmux callbacks for the pinmux vertical in pinctrl core */ +static struct pinmux_ops exynos5440_pinmux_ops = { + .get_functions_count = exynos5440_get_functions_count, + .get_function_name = exynos5440_pinmux_get_fname, + .get_function_groups = exynos5440_pinmux_get_groups, + .enable = exynos5440_pinmux_enable, + .disable = exynos5440_pinmux_disable, + .gpio_set_direction = exynos5440_pinmux_gpio_set_direction, +}; + +/* set the pin config settings for a specified pin */ +static int exynos5440_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin, + unsigned long config) +{ + struct exynos5440_pinctrl_priv_data *priv; + void __iomem *base; + enum pincfg_type cfg_type = PINCFG_UNPACK_TYPE(config); + u32 cfg_value = PINCFG_UNPACK_VALUE(config); + u32 data; + + priv = pinctrl_dev_get_drvdata(pctldev); + base = priv->reg_base; + + switch (cfg_type) { + case PINCFG_TYPE_PUD: + /* first set pull enable/disable bit */ + data = readl(base + GPIO_PE); + data &= ~(1 << pin); + if (cfg_value) + data |= (1 << pin); + writel(data, base + GPIO_PE); + + /* then set pull up/down bit */ + data = readl(base + GPIO_PS); + data &= ~(1 << pin); + if (cfg_value == 2) + data |= (1 << pin); + writel(data, base + GPIO_PS); + break; + + case PINCFG_TYPE_DRV: + /* set the first bit of the drive strength */ + data = readl(base + GPIO_DS0); + data &= ~(1 << pin); + data |= ((cfg_value & 1) << pin); + writel(data, base + GPIO_DS0); + cfg_value >>= 1; + + /* set the second bit of the driver strength */ + data = readl(base + GPIO_DS1); + data &= ~(1 << pin); + data |= ((cfg_value & 1) << pin); + writel(data, base + GPIO_DS1); + break; + case PINCFG_TYPE_SKEW_RATE: + data = readl(base + GPIO_SR); + data &= ~(1 << pin); + data |= ((cfg_value & 1) << pin); + writel(data, base + GPIO_SR); + break; + case PINCFG_TYPE_INPUT_TYPE: + data = readl(base + GPIO_TYPE); + data &= ~(1 << pin); + data |= ((cfg_value & 1) << pin); + writel(data, base + GPIO_TYPE); + break; + default: + WARN_ON(1); + return -EINVAL; + } + + return 0; +} + +/* get the pin config settings for a specified pin */ +static int exynos5440_pinconf_get(struct pinctrl_dev *pctldev, unsigned int pin, + unsigned long *config) +{ + struct exynos5440_pinctrl_priv_data *priv; + void __iomem *base; + enum pincfg_type cfg_type = PINCFG_UNPACK_TYPE(*config); + u32 data; + + priv = pinctrl_dev_get_drvdata(pctldev); + base = priv->reg_base; + + switch (cfg_type) { + case PINCFG_TYPE_PUD: + data = readl(base + GPIO_PE); + data = (data >> pin) & 1; + if (!data) + *config = 0; + else + *config = ((readl(base + GPIO_PS) >> pin) & 1) + 1; + break; + case PINCFG_TYPE_DRV: + data = readl(base + GPIO_DS0); + data = (data >> pin) & 1; + *config = data; + data = readl(base + GPIO_DS1); + data = (data >> pin) & 1; + *config |= (data << 1); + break; + case PINCFG_TYPE_SKEW_RATE: + data = readl(base + GPIO_SR); + *config = (data >> pin) & 1; + break; + case PINCFG_TYPE_INPUT_TYPE: + data = readl(base + GPIO_TYPE); + *config = (data >> pin) & 1; + break; + default: + WARN_ON(1); + return -EINVAL; + } + + return 0; +} + +/* set the pin config settings for a specified pin group */ +static int exynos5440_pinconf_group_set(struct pinctrl_dev *pctldev, + unsigned group, unsigned long config) +{ + struct exynos5440_pinctrl_priv_data *priv; + const unsigned int *pins; + unsigned int cnt; + + priv = pinctrl_dev_get_drvdata(pctldev); + pins = priv->pin_groups[group].pins; + + for (cnt = 0; cnt < priv->pin_groups[group].num_pins; cnt++) + exynos5440_pinconf_set(pctldev, pins[cnt], config); + + return 0; +} + +/* get the pin config settings for a specified pin group */ +static int exynos5440_pinconf_group_get(struct pinctrl_dev *pctldev, + unsigned int group, unsigned long *config) +{ + struct exynos5440_pinctrl_priv_data *priv; + const unsigned int *pins; + + priv = pinctrl_dev_get_drvdata(pctldev); + pins = priv->pin_groups[group].pins; + exynos5440_pinconf_get(pctldev, pins[0], config); + return 0; +} + +/* list of pinconfig callbacks for pinconfig vertical in the pinctrl code */ +static struct pinconf_ops exynos5440_pinconf_ops = { + .pin_config_get = exynos5440_pinconf_get, + .pin_config_set = exynos5440_pinconf_set, + .pin_config_group_get = exynos5440_pinconf_group_get, + .pin_config_group_set = exynos5440_pinconf_group_set, +}; + +/* gpiolib gpio_set callback function */ +static void exynos5440_gpio_set(struct gpio_chip *gc, unsigned offset, int value) +{ + struct exynos5440_pinctrl_priv_data *priv = dev_get_drvdata(gc->dev); + void __iomem *base = priv->reg_base; + u32 data; + + data = readl(base + GPIO_VAL); + data &= ~(1 << offset); + if (value) + data |= 1 << offset; + writel(data, base + GPIO_VAL); +} + +/* gpiolib gpio_get callback function */ +static int exynos5440_gpio_get(struct gpio_chip *gc, unsigned offset) +{ + struct exynos5440_pinctrl_priv_data *priv = dev_get_drvdata(gc->dev); + void __iomem *base = priv->reg_base; + u32 data; + + data = readl(base + GPIO_IN); + data >>= offset; + data &= 1; + return data; +} + +/* gpiolib gpio_direction_input callback function */ +static int exynos5440_gpio_direction_input(struct gpio_chip *gc, unsigned offset) +{ + struct exynos5440_pinctrl_priv_data *priv = dev_get_drvdata(gc->dev); + void __iomem *base = priv->reg_base; + u32 data; + + /* first disable the data output enable on this pin */ + data = readl(base + GPIO_OE); + data &= ~(1 << offset); + writel(data, base + GPIO_OE); + + /* now enable input on this pin */ + data = readl(base + GPIO_IE); + data |= 1 << offset; + writel(data, base + GPIO_IE); + return 0; +} + +/* gpiolib gpio_direction_output callback function */ +static int exynos5440_gpio_direction_output(struct gpio_chip *gc, unsigned offset, + int value) +{ + struct exynos5440_pinctrl_priv_data *priv = dev_get_drvdata(gc->dev); + void __iomem *base = priv->reg_base; + u32 data; + + exynos5440_gpio_set(gc, offset, value); + + /* first disable the data input enable on this pin */ + data = readl(base + GPIO_IE); + data &= ~(1 << offset); + writel(data, base + GPIO_IE); + + /* now enable output on this pin */ + data = readl(base + GPIO_OE); + data |= 1 << offset; + writel(data, base + GPIO_OE); + return 0; +} + +/* parse the pin numbers listed in the 'samsung,exynos5440-pins' property */ +static int __init exynos5440_pinctrl_parse_dt_pins(struct platform_device *pdev, + struct device_node *cfg_np, unsigned int **pin_list, + unsigned int *npins) +{ + struct device *dev = &pdev->dev; + struct property *prop; + + prop = of_find_property(cfg_np, "samsung,exynos5440-pins", NULL); + if (!prop) + return -ENOENT; + + *npins = prop->length / sizeof(unsigned long); + if (!*npins) { + dev_err(dev, "invalid pin list in %s node", cfg_np->name); + return -EINVAL; + } + + *pin_list = devm_kzalloc(dev, *npins * sizeof(**pin_list), GFP_KERNEL); + if (!*pin_list) { + dev_err(dev, "failed to allocate memory for pin list\n"); + return -ENOMEM; + } + + return of_property_read_u32_array(cfg_np, "samsung,exynos5440-pins", + *pin_list, *npins); +} + +/* + * Parse the information about all the available pin groups and pin functions + * from device node of the pin-controller. + */ +static int __init exynos5440_pinctrl_parse_dt(struct platform_device *pdev, + struct exynos5440_pinctrl_priv_data *priv) +{ + struct device *dev = &pdev->dev; + struct device_node *dev_np = dev->of_node; + struct device_node *cfg_np; + struct exynos5440_pin_group *groups, *grp; + struct exynos5440_pmx_func *functions, *func; + unsigned *pin_list; + unsigned int npins, grp_cnt, func_idx = 0; + char *gname, *fname; + int ret; + + grp_cnt = of_get_child_count(dev_np); + if (!grp_cnt) + return -EINVAL; + + groups = devm_kzalloc(dev, grp_cnt * sizeof(*groups), GFP_KERNEL); + if (!groups) { + dev_err(dev, "failed allocate memory for ping group list\n"); + return -EINVAL; + } + grp = groups; + + functions = devm_kzalloc(dev, grp_cnt * sizeof(*functions), GFP_KERNEL); + if (!functions) { + dev_err(dev, "failed to allocate memory for function list\n"); + return -EINVAL; + } + func = functions; + + /* + * Iterate over all the child nodes of the pin controller node + * and create pin groups and pin function lists. + */ + for_each_child_of_node(dev_np, cfg_np) { + u32 function; + + ret = exynos5440_pinctrl_parse_dt_pins(pdev, cfg_np, + &pin_list, &npins); + if (ret) + return ret; + + /* derive pin group name from the node name */ + gname = devm_kzalloc(dev, strlen(cfg_np->name) + GSUFFIX_LEN, + GFP_KERNEL); + if (!gname) { + dev_err(dev, "failed to alloc memory for group name\n"); + return -ENOMEM; + } + sprintf(gname, "%s%s", cfg_np->name, GROUP_SUFFIX); + + grp->name = gname; + grp->pins = pin_list; + grp->num_pins = npins; + grp++; + + ret = of_property_read_u32(cfg_np, "samsung,exynos5440-pin-function", + &function); + if (ret) + continue; + + /* derive function name from the node name */ + fname = devm_kzalloc(dev, strlen(cfg_np->name) + FSUFFIX_LEN, + GFP_KERNEL); + if (!fname) { + dev_err(dev, "failed to alloc memory for func name\n"); + return -ENOMEM; + } + sprintf(fname, "%s%s", cfg_np->name, FUNCTION_SUFFIX); + + func->name = fname; + func->groups = devm_kzalloc(dev, sizeof(char *), GFP_KERNEL); + if (!func->groups) { + dev_err(dev, "failed to alloc memory for group list " + "in pin function"); + return -ENOMEM; + } + func->groups[0] = gname; + func->num_groups = 1; + func->function = function; + func++; + func_idx++; + } + + priv->pin_groups = groups; + priv->nr_groups = grp_cnt; + priv->pmx_functions = functions; + priv->nr_functions = func_idx; + return 0; +} + +/* register the pinctrl interface with the pinctrl subsystem */ +static int __init exynos5440_pinctrl_register(struct platform_device *pdev, + struct exynos5440_pinctrl_priv_data *priv) +{ + struct device *dev = &pdev->dev; + struct pinctrl_desc *ctrldesc; + struct pinctrl_dev *pctl_dev; + struct pinctrl_pin_desc *pindesc, *pdesc; + struct pinctrl_gpio_range grange; + char *pin_names; + int pin, ret; + + ctrldesc = devm_kzalloc(dev, sizeof(*ctrldesc), GFP_KERNEL); + if (!ctrldesc) { + dev_err(dev, "could not allocate memory for pinctrl desc\n"); + return -ENOMEM; + } + + ctrldesc->name = "exynos5440-pinctrl"; + ctrldesc->owner = THIS_MODULE; + ctrldesc->pctlops = &exynos5440_pctrl_ops; + ctrldesc->pmxops = &exynos5440_pinmux_ops; + ctrldesc->confops = &exynos5440_pinconf_ops; + + pindesc = devm_kzalloc(&pdev->dev, sizeof(*pindesc) * + EXYNOS5440_MAX_PINS, GFP_KERNEL); + if (!pindesc) { + dev_err(&pdev->dev, "mem alloc for pin descriptors failed\n"); + return -ENOMEM; + } + ctrldesc->pins = pindesc; + ctrldesc->npins = EXYNOS5440_MAX_PINS; + + /* dynamically populate the pin number and pin name for pindesc */ + for (pin = 0, pdesc = pindesc; pin < ctrldesc->npins; pin++, pdesc++) + pdesc->number = pin; + + /* + * allocate space for storing the dynamically generated names for all + * the pins which belong to this pin-controller. + */ + pin_names = devm_kzalloc(&pdev->dev, sizeof(char) * PIN_NAME_LENGTH * + ctrldesc->npins, GFP_KERNEL); + if (!pin_names) { + dev_err(&pdev->dev, "mem alloc for pin names failed\n"); + return -ENOMEM; + } + + /* for each pin, set the name of the pin */ + for (pin = 0; pin < ctrldesc->npins; pin++) { + sprintf(pin_names, "gpio%02d", pin); + pdesc = pindesc + pin; + pdesc->name = pin_names; + pin_names += PIN_NAME_LENGTH; + } + + ret = exynos5440_pinctrl_parse_dt(pdev, priv); + if (ret) + return ret; + + pctl_dev = pinctrl_register(ctrldesc, &pdev->dev, priv); + if (!pctl_dev) { + dev_err(&pdev->dev, "could not register pinctrl driver\n"); + return -EINVAL; + } + + grange.name = "exynos5440-pctrl-gpio-range"; + grange.id = 0; + grange.base = 0; + grange.npins = EXYNOS5440_MAX_PINS; + grange.gc = priv->gc; + pinctrl_add_gpio_range(pctl_dev, &grange); + return 0; +} + +/* register the gpiolib interface with the gpiolib subsystem */ +static int __init exynos5440_gpiolib_register(struct platform_device *pdev, + struct exynos5440_pinctrl_priv_data *priv) +{ + struct gpio_chip *gc; + int ret; + + gc = devm_kzalloc(&pdev->dev, sizeof(*gc), GFP_KERNEL); + if (!gc) { + dev_err(&pdev->dev, "mem alloc for gpio_chip failed\n"); + return -ENOMEM; + } + + priv->gc = gc; + gc->base = 0; + gc->ngpio = EXYNOS5440_MAX_PINS; + gc->dev = &pdev->dev; + gc->set = exynos5440_gpio_set; + gc->get = exynos5440_gpio_get; + gc->direction_input = exynos5440_gpio_direction_input; + gc->direction_output = exynos5440_gpio_direction_output; + gc->label = "gpiolib-exynos5440"; + gc->owner = THIS_MODULE; + ret = gpiochip_add(gc); + if (ret) { + dev_err(&pdev->dev, "failed to register gpio_chip %s, error " + "code: %d\n", gc->label, ret); + return ret; + } + + return 0; +} + +/* unregister the gpiolib interface with the gpiolib subsystem */ +static int __init exynos5440_gpiolib_unregister(struct platform_device *pdev, + struct exynos5440_pinctrl_priv_data *priv) +{ + int ret = gpiochip_remove(priv->gc); + if (ret) { + dev_err(&pdev->dev, "gpio chip remove failed\n"); + return ret; + } + return 0; +} + +static int __devinit exynos5440_pinctrl_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct exynos5440_pinctrl_priv_data *priv; + struct resource *res; + int ret; + + if (!dev->of_node) { + dev_err(dev, "device tree node not found\n"); + return -ENODEV; + } + + priv = devm_kzalloc(dev, sizeof(priv), GFP_KERNEL); + if (!priv) { + dev_err(dev, "could not allocate memory for private data\n"); + return -ENOMEM; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(dev, "cannot find IO resource\n"); + return -ENOENT; + } + + priv->reg_base = devm_request_and_ioremap(&pdev->dev, res); + if (!priv->reg_base) { + dev_err(dev, "ioremap failed\n"); + return -ENODEV; + } + + ret = exynos5440_gpiolib_register(pdev, priv); + if (ret) + return ret; + + ret = exynos5440_pinctrl_register(pdev, priv); + if (ret) { + exynos5440_gpiolib_unregister(pdev, priv); + return ret; + } + + platform_set_drvdata(pdev, priv); + dev_info(dev, "EXYNOS5440 pinctrl driver registered\n"); + return 0; +} + +static const struct of_device_id exynos5440_pinctrl_dt_match[] = { + { .compatible = "samsung,exynos5440-pinctrl" }, + {}, +}; +MODULE_DEVICE_TABLE(of, exynos5440_pinctrl_dt_match); + +static struct platform_driver exynos5440_pinctrl_driver = { + .probe = exynos5440_pinctrl_probe, + .driver = { + .name = "exynos5440-pinctrl", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(exynos5440_pinctrl_dt_match), + }, +}; + +static int __init exynos5440_pinctrl_drv_register(void) +{ + return platform_driver_register(&exynos5440_pinctrl_driver); +} +postcore_initcall(exynos5440_pinctrl_drv_register); + +static void __exit exynos5440_pinctrl_drv_unregister(void) +{ + platform_driver_unregister(&exynos5440_pinctrl_driver); +} +module_exit(exynos5440_pinctrl_drv_unregister); + +MODULE_AUTHOR("Thomas Abraham <thomas.ab@samsung.com>"); +MODULE_DESCRIPTION("Samsung EXYNOS5440 SoC pinctrl driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/pinctrl/pinctrl-samsung.c b/drivers/pinctrl/pinctrl-samsung.c index 861cd5f04d5..8f31b656c4e 100644 --- a/drivers/pinctrl/pinctrl-samsung.c +++ b/drivers/pinctrl/pinctrl-samsung.c @@ -26,6 +26,7 @@ #include <linux/slab.h> #include <linux/err.h> #include <linux/gpio.h> +#include <linux/irqdomain.h> #include "core.h" #include "pinctrl-samsung.h" @@ -46,6 +47,13 @@ struct pin_config { { "samsung,pin-pud-pdn", PINCFG_TYPE_PUD_PDN }, }; +static unsigned int pin_base; + +static inline struct samsung_pin_bank *gc_to_pin_bank(struct gpio_chip *gc) +{ + return container_of(gc, struct samsung_pin_bank, gpio_chip); +} + /* check if the selector is a valid pin group selector */ static int samsung_get_group_count(struct pinctrl_dev *pctldev) { @@ -250,14 +258,12 @@ static int samsung_pinmux_get_groups(struct pinctrl_dev *pctldev, * given a pin number that is local to a pin controller, find out the pin bank * and the register base of the pin bank. */ -static void pin_to_reg_bank(struct gpio_chip *gc, unsigned pin, - void __iomem **reg, u32 *offset, +static void pin_to_reg_bank(struct samsung_pinctrl_drv_data *drvdata, + unsigned pin, void __iomem **reg, u32 *offset, struct samsung_pin_bank **bank) { - struct samsung_pinctrl_drv_data *drvdata; struct samsung_pin_bank *b; - drvdata = dev_get_drvdata(gc->dev); b = drvdata->ctrl->pin_banks; while ((pin >= b->pin_base) && @@ -292,7 +298,7 @@ static void samsung_pinmux_setup(struct pinctrl_dev *pctldev, unsigned selector, * pin function number in the config register. */ for (cnt = 0; cnt < drvdata->pin_groups[group].num_pins; cnt++) { - pin_to_reg_bank(drvdata->gc, pins[cnt] - drvdata->ctrl->base, + pin_to_reg_bank(drvdata, pins[cnt] - drvdata->ctrl->base, ®, &pin_offset, &bank); mask = (1 << bank->func_width) - 1; shift = pin_offset * bank->func_width; @@ -329,10 +335,16 @@ static int samsung_pinmux_gpio_set_direction(struct pinctrl_dev *pctldev, struct pinctrl_gpio_range *range, unsigned offset, bool input) { struct samsung_pin_bank *bank; + struct samsung_pinctrl_drv_data *drvdata; void __iomem *reg; u32 data, pin_offset, mask, shift; - pin_to_reg_bank(range->gc, offset, ®, &pin_offset, &bank); + bank = gc_to_pin_bank(range->gc); + drvdata = pinctrl_dev_get_drvdata(pctldev); + + pin_offset = offset - bank->pin_base; + reg = drvdata->virt_base + bank->pctl_offset; + mask = (1 << bank->func_width) - 1; shift = pin_offset * bank->func_width; @@ -366,7 +378,7 @@ static int samsung_pinconf_rw(struct pinctrl_dev *pctldev, unsigned int pin, u32 cfg_value, cfg_reg; drvdata = pinctrl_dev_get_drvdata(pctldev); - pin_to_reg_bank(drvdata->gc, pin - drvdata->ctrl->base, ®_base, + pin_to_reg_bank(drvdata, pin - drvdata->ctrl->base, ®_base, &pin_offset, &bank); switch (cfg_type) { @@ -391,6 +403,9 @@ static int samsung_pinconf_rw(struct pinctrl_dev *pctldev, unsigned int pin, return -EINVAL; } + if (!width) + return -EINVAL; + mask = (1 << width) - 1; shift = pin_offset * width; data = readl(reg_base + cfg_reg); @@ -463,14 +478,16 @@ static struct pinconf_ops samsung_pinconf_ops = { /* gpiolib gpio_set callback function */ static void samsung_gpio_set(struct gpio_chip *gc, unsigned offset, int value) { + struct samsung_pin_bank *bank = gc_to_pin_bank(gc); void __iomem *reg; - u32 pin_offset, data; + u32 data; + + reg = bank->drvdata->virt_base + bank->pctl_offset; - pin_to_reg_bank(gc, offset, ®, &pin_offset, NULL); data = readl(reg + DAT_REG); - data &= ~(1 << pin_offset); + data &= ~(1 << offset); if (value) - data |= 1 << pin_offset; + data |= 1 << offset; writel(data, reg + DAT_REG); } @@ -478,11 +495,13 @@ static void samsung_gpio_set(struct gpio_chip *gc, unsigned offset, int value) static int samsung_gpio_get(struct gpio_chip *gc, unsigned offset) { void __iomem *reg; - u32 pin_offset, data; + u32 data; + struct samsung_pin_bank *bank = gc_to_pin_bank(gc); + + reg = bank->drvdata->virt_base + bank->pctl_offset; - pin_to_reg_bank(gc, offset, ®, &pin_offset, NULL); data = readl(reg + DAT_REG); - data >>= pin_offset; + data >>= offset; data &= 1; return data; } @@ -510,6 +529,23 @@ static int samsung_gpio_direction_output(struct gpio_chip *gc, unsigned offset, } /* + * gpiolib gpio_to_irq callback function. Creates a mapping between a GPIO pin + * and a virtual IRQ, if not already present. + */ +static int samsung_gpio_to_irq(struct gpio_chip *gc, unsigned offset) +{ + struct samsung_pin_bank *bank = gc_to_pin_bank(gc); + unsigned int virq; + + if (!bank->irq_domain) + return -ENXIO; + + virq = irq_create_mapping(bank->irq_domain, offset); + + return (virq) ? : -ENXIO; +} + +/* * Parse the pin names listed in the 'samsung,pins' property and convert it * into a list of gpio numbers are create a pin group from it. */ @@ -524,7 +560,7 @@ static int __devinit samsung_pinctrl_parse_dt_pins(struct platform_device *pdev, const char *pin_name; *npins = of_property_count_strings(cfg_np, "samsung,pins"); - if (*npins < 0) { + if (IS_ERR_VALUE(*npins)) { dev_err(dev, "invalid pin list in %s node", cfg_np->name); return -EINVAL; } @@ -597,7 +633,7 @@ static int __devinit samsung_pinctrl_parse_dt(struct platform_device *pdev, */ for_each_child_of_node(dev_np, cfg_np) { u32 function; - if (of_find_property(cfg_np, "interrupt-controller", NULL)) + if (!of_find_property(cfg_np, "samsung,pins", NULL)) continue; ret = samsung_pinctrl_parse_dt_pins(pdev, cfg_np, @@ -712,12 +748,16 @@ static int __devinit samsung_pinctrl_register(struct platform_device *pdev, return -EINVAL; } - drvdata->grange.name = "samsung-pctrl-gpio-range"; - drvdata->grange.id = 0; - drvdata->grange.base = drvdata->ctrl->base; - drvdata->grange.npins = drvdata->ctrl->nr_pins; - drvdata->grange.gc = drvdata->gc; - pinctrl_add_gpio_range(drvdata->pctl_dev, &drvdata->grange); + for (bank = 0; bank < drvdata->ctrl->nr_banks; ++bank) { + pin_bank = &drvdata->ctrl->pin_banks[bank]; + pin_bank->grange.name = pin_bank->name; + pin_bank->grange.id = bank; + pin_bank->grange.pin_base = pin_bank->pin_base; + pin_bank->grange.base = pin_bank->gpio_chip.base; + pin_bank->grange.npins = pin_bank->gpio_chip.ngpio; + pin_bank->grange.gc = &pin_bank->gpio_chip; + pinctrl_add_gpio_range(drvdata->pctl_dev, &pin_bank->grange); + } ret = samsung_pinctrl_parse_dt(pdev, drvdata); if (ret) { @@ -728,68 +768,117 @@ static int __devinit samsung_pinctrl_register(struct platform_device *pdev, return 0; } +static const struct gpio_chip samsung_gpiolib_chip = { + .set = samsung_gpio_set, + .get = samsung_gpio_get, + .direction_input = samsung_gpio_direction_input, + .direction_output = samsung_gpio_direction_output, + .to_irq = samsung_gpio_to_irq, + .owner = THIS_MODULE, +}; + /* register the gpiolib interface with the gpiolib subsystem */ static int __devinit samsung_gpiolib_register(struct platform_device *pdev, struct samsung_pinctrl_drv_data *drvdata) { + struct samsung_pin_ctrl *ctrl = drvdata->ctrl; + struct samsung_pin_bank *bank = ctrl->pin_banks; struct gpio_chip *gc; int ret; - - gc = devm_kzalloc(&pdev->dev, sizeof(*gc), GFP_KERNEL); - if (!gc) { - dev_err(&pdev->dev, "mem alloc for gpio_chip failed\n"); - return -ENOMEM; - } - - drvdata->gc = gc; - gc->base = drvdata->ctrl->base; - gc->ngpio = drvdata->ctrl->nr_pins; - gc->dev = &pdev->dev; - gc->set = samsung_gpio_set; - gc->get = samsung_gpio_get; - gc->direction_input = samsung_gpio_direction_input; - gc->direction_output = samsung_gpio_direction_output; - gc->label = drvdata->ctrl->label; - gc->owner = THIS_MODULE; - ret = gpiochip_add(gc); - if (ret) { - dev_err(&pdev->dev, "failed to register gpio_chip %s, error " - "code: %d\n", gc->label, ret); - return ret; + int i; + + for (i = 0; i < ctrl->nr_banks; ++i, ++bank) { + bank->gpio_chip = samsung_gpiolib_chip; + + gc = &bank->gpio_chip; + gc->base = ctrl->base + bank->pin_base; + gc->ngpio = bank->nr_pins; + gc->dev = &pdev->dev; + gc->of_node = bank->of_node; + gc->label = bank->name; + + ret = gpiochip_add(gc); + if (ret) { + dev_err(&pdev->dev, "failed to register gpio_chip %s, error code: %d\n", + gc->label, ret); + goto fail; + } } return 0; + +fail: + for (--i, --bank; i >= 0; --i, --bank) + if (gpiochip_remove(&bank->gpio_chip)) + dev_err(&pdev->dev, "gpio chip %s remove failed\n", + bank->gpio_chip.label); + return ret; } /* unregister the gpiolib interface with the gpiolib subsystem */ static int __devinit samsung_gpiolib_unregister(struct platform_device *pdev, struct samsung_pinctrl_drv_data *drvdata) { - int ret = gpiochip_remove(drvdata->gc); - if (ret) { + struct samsung_pin_ctrl *ctrl = drvdata->ctrl; + struct samsung_pin_bank *bank = ctrl->pin_banks; + int ret = 0; + int i; + + for (i = 0; !ret && i < ctrl->nr_banks; ++i, ++bank) + ret = gpiochip_remove(&bank->gpio_chip); + + if (ret) dev_err(&pdev->dev, "gpio chip remove failed\n"); - return ret; - } - return 0; + + return ret; } static const struct of_device_id samsung_pinctrl_dt_match[]; /* retrieve the soc specific data */ static struct samsung_pin_ctrl *samsung_pinctrl_get_soc_data( + struct samsung_pinctrl_drv_data *d, struct platform_device *pdev) { int id; const struct of_device_id *match; - const struct device_node *node = pdev->dev.of_node; + struct device_node *node = pdev->dev.of_node; + struct device_node *np; + struct samsung_pin_ctrl *ctrl; + struct samsung_pin_bank *bank; + int i; - id = of_alias_get_id(pdev->dev.of_node, "pinctrl"); + id = of_alias_get_id(node, "pinctrl"); if (id < 0) { dev_err(&pdev->dev, "failed to get alias id\n"); return NULL; } match = of_match_node(samsung_pinctrl_dt_match, node); - return (struct samsung_pin_ctrl *)match->data + id; + ctrl = (struct samsung_pin_ctrl *)match->data + id; + + bank = ctrl->pin_banks; + for (i = 0; i < ctrl->nr_banks; ++i, ++bank) { + bank->drvdata = d; + bank->pin_base = ctrl->nr_pins; + ctrl->nr_pins += bank->nr_pins; + } + + for_each_child_of_node(node, np) { + if (!of_find_property(np, "gpio-controller", NULL)) + continue; + bank = ctrl->pin_banks; + for (i = 0; i < ctrl->nr_banks; ++i, ++bank) { + if (!strcmp(bank->name, np->name)) { + bank->of_node = np; + break; + } + } + } + + ctrl->base = pin_base; + pin_base += ctrl->nr_pins; + + return ctrl; } static int __devinit samsung_pinctrl_probe(struct platform_device *pdev) @@ -805,18 +894,18 @@ static int __devinit samsung_pinctrl_probe(struct platform_device *pdev) return -ENODEV; } - ctrl = samsung_pinctrl_get_soc_data(pdev); - if (!ctrl) { - dev_err(&pdev->dev, "driver data not available\n"); - return -EINVAL; - } - drvdata = devm_kzalloc(dev, sizeof(*drvdata), GFP_KERNEL); if (!drvdata) { dev_err(dev, "failed to allocate memory for driver's " "private data\n"); return -ENOMEM; } + + ctrl = samsung_pinctrl_get_soc_data(drvdata, pdev); + if (!ctrl) { + dev_err(&pdev->dev, "driver data not available\n"); + return -EINVAL; + } drvdata->ctrl = ctrl; drvdata->dev = dev; @@ -858,6 +947,8 @@ static int __devinit samsung_pinctrl_probe(struct platform_device *pdev) static const struct of_device_id samsung_pinctrl_dt_match[] = { { .compatible = "samsung,pinctrl-exynos4210", .data = (void *)exynos4210_pin_ctrl }, + { .compatible = "samsung,pinctrl-exynos4x12", + .data = (void *)exynos4x12_pin_ctrl }, {}, }; MODULE_DEVICE_TABLE(of, samsung_pinctrl_dt_match); diff --git a/drivers/pinctrl/pinctrl-samsung.h b/drivers/pinctrl/pinctrl-samsung.h index b8956934cda..5addfd16e3c 100644 --- a/drivers/pinctrl/pinctrl-samsung.h +++ b/drivers/pinctrl/pinctrl-samsung.h @@ -23,6 +23,8 @@ #include <linux/pinctrl/consumer.h> #include <linux/pinctrl/machine.h> +#include <linux/gpio.h> + /* register offsets within a pin bank */ #define DAT_REG 0x4 #define PUD_REG 0x8 @@ -64,6 +66,7 @@ enum pincfg_type { * @EINT_TYPE_NONE: bank does not support external interrupts * @EINT_TYPE_GPIO: bank supportes external gpio interrupts * @EINT_TYPE_WKUP: bank supportes external wakeup interrupts + * @EINT_TYPE_WKUP_MUX: bank supports multiplexed external wakeup interrupts * * Samsung GPIO controller groups all the available pins into banks. The pins * in a pin bank can support external gpio interrupts or external wakeup @@ -76,6 +79,7 @@ enum eint_type { EINT_TYPE_NONE, EINT_TYPE_GPIO, EINT_TYPE_WKUP, + EINT_TYPE_WKUP_MUX, }; /* maximum length of a pin in pin descriptor (example: "gpa0-0") */ @@ -109,8 +113,12 @@ struct samsung_pinctrl_drv_data; * @conpdn_width: width of the sleep mode function selector bin field. * @pudpdn_width: width of the sleep mode pull up/down selector bit field. * @eint_type: type of the external interrupt supported by the bank. - * @irq_base: starting controller local irq number of the bank. * @name: name to be prefixed for each pin in this pin bank. + * @of_node: OF node of the bank. + * @drvdata: link to controller driver data + * @irq_domain: IRQ domain of the bank. + * @gpio_chip: GPIO chip of the bank. + * @grange: linux gpio pin range supported by this bank. */ struct samsung_pin_bank { u32 pctl_offset; @@ -122,8 +130,13 @@ struct samsung_pin_bank { u8 conpdn_width; u8 pudpdn_width; enum eint_type eint_type; - u32 irq_base; + u32 eint_offset; char *name; + struct device_node *of_node; + struct samsung_pinctrl_drv_data *drvdata; + struct irq_domain *irq_domain; + struct gpio_chip gpio_chip; + struct pinctrl_gpio_range grange; }; /** @@ -132,8 +145,6 @@ struct samsung_pin_bank { * @nr_banks: number of pin banks. * @base: starting system wide pin number. * @nr_pins: number of pins supported by the controller. - * @nr_gint: number of external gpio interrupts supported. - * @nr_wint: number of external wakeup interrupts supported. * @geint_con: offset of the ext-gpio controller registers. * @geint_mask: offset of the ext-gpio interrupt mask registers. * @geint_pend: offset of the ext-gpio interrupt pending registers. @@ -153,8 +164,6 @@ struct samsung_pin_ctrl { u32 base; u32 nr_pins; - u32 nr_gint; - u32 nr_wint; u32 geint_con; u32 geint_mask; @@ -183,8 +192,6 @@ struct samsung_pin_ctrl { * @nr_groups: number of such pin groups. * @pmx_functions: list of pin functions available to the driver. * @nr_function: number of such pin functions. - * @gc: gpio_chip instance registered with gpiolib. - * @grange: linux gpio pin range supported by this controller. */ struct samsung_pinctrl_drv_data { void __iomem *virt_base; @@ -199,12 +206,6 @@ struct samsung_pinctrl_drv_data { unsigned int nr_groups; const struct samsung_pmx_func *pmx_functions; unsigned int nr_functions; - - struct irq_domain *gpio_irqd; - struct irq_domain *wkup_irqd; - - struct gpio_chip *gc; - struct pinctrl_gpio_range grange; }; /** @@ -235,5 +236,6 @@ struct samsung_pmx_func { /* list of all exported SoC specific data */ extern struct samsung_pin_ctrl exynos4210_pin_ctrl[]; +extern struct samsung_pin_ctrl exynos4x12_pin_ctrl[]; #endif /* __PINCTRL_SAMSUNG_H */ diff --git a/drivers/sh/clk/cpg.c b/drivers/sh/clk/cpg.c index 07e9fb4f804..b3dc44146ca 100644 --- a/drivers/sh/clk/cpg.c +++ b/drivers/sh/clk/cpg.c @@ -361,3 +361,89 @@ int __init sh_clk_div4_reparent_register(struct clk *clks, int nr, return sh_clk_div_register_ops(clks, nr, table, &sh_clk_div4_reparent_clk_ops); } + +/* FSI-DIV */ +static unsigned long fsidiv_recalc(struct clk *clk) +{ + u32 value; + + value = __raw_readl(clk->mapping->base); + + value >>= 16; + if (value < 2) + return clk->parent->rate; + + return clk->parent->rate / value; +} + +static long fsidiv_round_rate(struct clk *clk, unsigned long rate) +{ + return clk_rate_div_range_round(clk, 1, 0xffff, rate); +} + +static void fsidiv_disable(struct clk *clk) +{ + __raw_writel(0, clk->mapping->base); +} + +static int fsidiv_enable(struct clk *clk) +{ + u32 value; + + value = __raw_readl(clk->mapping->base) >> 16; + if (value < 2) + return 0; + + __raw_writel((value << 16) | 0x3, clk->mapping->base); + + return 0; +} + +static int fsidiv_set_rate(struct clk *clk, unsigned long rate) +{ + u32 val; + int idx; + + idx = (clk->parent->rate / rate) & 0xffff; + if (idx < 2) + __raw_writel(0, clk->mapping->base); + else + __raw_writel(idx << 16, clk->mapping->base); + + return 0; +} + +static struct sh_clk_ops fsidiv_clk_ops = { + .recalc = fsidiv_recalc, + .round_rate = fsidiv_round_rate, + .set_rate = fsidiv_set_rate, + .enable = fsidiv_enable, + .disable = fsidiv_disable, +}; + +int __init sh_clk_fsidiv_register(struct clk *clks, int nr) +{ + struct clk_mapping *map; + int i; + + for (i = 0; i < nr; i++) { + + map = kzalloc(sizeof(struct clk_mapping), GFP_KERNEL); + if (!map) { + pr_err("%s: unable to alloc memory\n", __func__); + return -ENOMEM; + } + + /* clks[i].enable_reg came from SH_CLK_FSIDIV() */ + map->phys = (phys_addr_t)clks[i].enable_reg; + map->len = 8; + + clks[i].enable_reg = 0; /* remove .enable_reg */ + clks[i].ops = &fsidiv_clk_ops; + clks[i].mapping = map; + + clk_register(&clks[i]); + } + + return 0; +} diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c index fb0e0f0bed0..12e5249d053 100644 --- a/drivers/tty/serial/samsung.c +++ b/drivers/tty/serial/samsung.c @@ -1654,7 +1654,8 @@ static struct s3c24xx_serial_drv_data s5pv210_serial_drv_data = { #endif #if defined(CONFIG_CPU_EXYNOS4210) || defined(CONFIG_SOC_EXYNOS4212) || \ - defined(CONFIG_SOC_EXYNOS4412) || defined(CONFIG_SOC_EXYNOS5250) + defined(CONFIG_SOC_EXYNOS4412) || defined(CONFIG_SOC_EXYNOS5250) || \ + defined(CONFIG_SOC_EXYNOS5440) static struct s3c24xx_serial_drv_data exynos4210_serial_drv_data = { .info = &(struct s3c24xx_uart_info) { .name = "Samsung Exynos4 UART", diff --git a/drivers/uio/Kconfig b/drivers/uio/Kconfig index 82e2b89d448..f56d185790e 100644 --- a/drivers/uio/Kconfig +++ b/drivers/uio/Kconfig @@ -113,6 +113,7 @@ config UIO_NETX config UIO_PRUSS tristate "Texas Instruments PRUSS driver" depends on ARCH_DAVINCI_DA850 + select GENERIC_ALLOCATOR help PRUSS driver for OMAPL138/DA850/AM18XX devices PRUSS driver requires user space components, examples and user space diff --git a/drivers/uio/uio_pruss.c b/drivers/uio/uio_pruss.c index cce0f78341c..6e2ab007fe9 100644 --- a/drivers/uio/uio_pruss.c +++ b/drivers/uio/uio_pruss.c @@ -25,7 +25,7 @@ #include <linux/clk.h> #include <linux/dma-mapping.h> #include <linux/slab.h> -#include <mach/sram.h> +#include <linux/genalloc.h> #define DRV_NAME "pruss_uio" #define DRV_VERSION "1.0" @@ -65,10 +65,11 @@ struct uio_pruss_dev { dma_addr_t sram_paddr; dma_addr_t ddr_paddr; void __iomem *prussio_vaddr; - void *sram_vaddr; + unsigned long sram_vaddr; void *ddr_vaddr; unsigned int hostirq_start; unsigned int pintc_base; + struct gen_pool *sram_pool; }; static irqreturn_t pruss_handler(int irq, struct uio_info *info) @@ -106,7 +107,9 @@ static void pruss_cleanup(struct platform_device *dev, gdev->ddr_paddr); } if (gdev->sram_vaddr) - sram_free(gdev->sram_vaddr, sram_pool_sz); + gen_pool_free(gdev->sram_pool, + gdev->sram_vaddr, + sram_pool_sz); kfree(gdev->info); clk_put(gdev->pruss_clk); kfree(gdev); @@ -152,10 +155,17 @@ static int pruss_probe(struct platform_device *dev) goto out_free; } - gdev->sram_vaddr = sram_alloc(sram_pool_sz, &(gdev->sram_paddr)); - if (!gdev->sram_vaddr) { - dev_err(&dev->dev, "Could not allocate SRAM pool\n"); - goto out_free; + if (pdata->sram_pool) { + gdev->sram_pool = pdata->sram_pool; + gdev->sram_vaddr = + gen_pool_alloc(gdev->sram_pool, sram_pool_sz); + if (!gdev->sram_vaddr) { + dev_err(&dev->dev, "Could not allocate SRAM pool\n"); + goto out_free; + } + gdev->sram_paddr = + gen_pool_virt_to_phys(gdev->sram_pool, + gdev->sram_vaddr); } gdev->ddr_vaddr = dma_alloc_coherent(&dev->dev, extram_pool_sz, diff --git a/drivers/video/clps711xfb.c b/drivers/video/clps711xfb.c index f994c8b8f10..63ecdf8f7ba 100644 --- a/drivers/video/clps711xfb.c +++ b/drivers/video/clps711xfb.c @@ -22,19 +22,15 @@ #include <linux/mm.h> #include <linux/module.h> #include <linux/kernel.h> -#include <linux/seq_file.h> #include <linux/slab.h> #include <linux/fb.h> #include <linux/init.h> -#include <linux/proc_fs.h> #include <linux/delay.h> #include <mach/hardware.h> #include <asm/mach-types.h> #include <linux/uaccess.h> -#include <mach/syspld.h> - struct fb_info *cfb; #define CMAP_MAX_SIZE 16 @@ -162,44 +158,12 @@ clps7111fb_set_par(struct fb_info *info) static int clps7111fb_blank(int blank, struct fb_info *info) { - if (blank) { - if (machine_is_edb7211()) { - /* Turn off the LCD backlight. */ - clps_writeb(clps_readb(PDDR) & ~EDB_PD3_LCDBL, PDDR); - - /* Power off the LCD DC-DC converter. */ - clps_writeb(clps_readb(PDDR) & ~EDB_PD1_LCD_DC_DC_EN, PDDR); - - /* Delay for a little while (half a second). */ - udelay(100); - - /* Power off the LCD panel. */ - clps_writeb(clps_readb(PDDR) & ~EDB_PD2_LCDEN, PDDR); - - /* Power off the LCD controller. */ - clps_writel(clps_readl(SYSCON1) & ~SYSCON1_LCDEN, - SYSCON1); - } - } else { - if (machine_is_edb7211()) { - /* Power up the LCD controller. */ - clps_writel(clps_readl(SYSCON1) | SYSCON1_LCDEN, - SYSCON1); - - /* Power up the LCD panel. */ - clps_writeb(clps_readb(PDDR) | EDB_PD2_LCDEN, PDDR); - - /* Delay for a little while. */ - udelay(100); + /* Enable/Disable LCD controller. */ + if (blank) + clps_writel(clps_readl(SYSCON1) & ~SYSCON1_LCDEN, SYSCON1); + else + clps_writel(clps_readl(SYSCON1) | SYSCON1_LCDEN, SYSCON1); - /* Power up the LCD DC-DC converter. */ - clps_writeb(clps_readb(PDDR) | EDB_PD1_LCD_DC_DC_EN, - PDDR); - - /* Turn on the LCD backlight. */ - clps_writeb(clps_readb(PDDR) | EDB_PD3_LCDBL, PDDR); - } - } return 0; } @@ -214,63 +178,7 @@ static struct fb_ops clps7111fb_ops = { .fb_imageblit = cfb_imageblit, }; -static int backlight_proc_show(struct seq_file *m, void *v) -{ - if (machine_is_edb7211()) { - seq_printf(m, "%d\n", - (clps_readb(PDDR) & EDB_PD3_LCDBL) ? 1 : 0); - } - - return 0; -} - -static int backlight_proc_open(struct inode *inode, struct file *file) -{ - return single_open(file, backlight_proc_show, NULL); -} - -static ssize_t backlight_proc_write(struct file *file, const char *buffer, - size_t count, loff_t *pos) -{ - unsigned char char_value; - int value; - - if (count < 1) { - return -EINVAL; - } - - if (copy_from_user(&char_value, buffer, 1)) - return -EFAULT; - - value = char_value - '0'; - - if (machine_is_edb7211()) { - unsigned char port_d; - - port_d = clps_readb(PDDR); - - if (value) { - port_d |= EDB_PD3_LCDBL; - } else { - port_d &= ~EDB_PD3_LCDBL; - } - - clps_writeb(port_d, PDDR); - } - - return count; -} - -static const struct file_operations backlight_proc_fops = { - .owner = THIS_MODULE, - .open = backlight_proc_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, - .write = backlight_proc_write, -}; - -static void __init clps711x_guess_lcd_params(struct fb_info *info) +static void __devinit clps711x_guess_lcd_params(struct fb_info *info) { unsigned int lcdcon, syscon, size; unsigned long phys_base = PAGE_OFFSET; @@ -358,7 +266,7 @@ static void __init clps711x_guess_lcd_params(struct fb_info *info) info->fix.type = FB_TYPE_PACKED_PIXELS; } -int __init clps711xfb_init(void) +static int __devinit clps711x_fb_probe(struct platform_device *pdev) { int err = -ENOMEM; @@ -378,55 +286,29 @@ int __init clps711xfb_init(void) fb_alloc_cmap(&cfb->cmap, CMAP_MAX_SIZE, 0); - if (!proc_create("backlight", 0444, NULL, &backlight_proc_fops)) { - printk("Couldn't create the /proc entry for the backlight.\n"); - return -EINVAL; - } - - /* - * Power up the LCD - */ - if (machine_is_p720t()) { - PLD_LCDEN = PLD_LCDEN_EN; - PLD_PWR |= (PLD_S4_ON|PLD_S3_ON|PLD_S2_ON|PLD_S1_ON); - } - - if (machine_is_edb7211()) { - /* Power up the LCD panel. */ - clps_writeb(clps_readb(PDDR) | EDB_PD2_LCDEN, PDDR); - - /* Delay for a little while. */ - udelay(100); - - /* Power up the LCD DC-DC converter. */ - clps_writeb(clps_readb(PDDR) | EDB_PD1_LCD_DC_DC_EN, PDDR); - - /* Turn on the LCD backlight. */ - clps_writeb(clps_readb(PDDR) | EDB_PD3_LCDBL, PDDR); - } - err = register_framebuffer(cfb); out: return err; } -static void __exit clps711xfb_exit(void) +static int __devexit clps711x_fb_remove(struct platform_device *pdev) { unregister_framebuffer(cfb); kfree(cfb); - /* - * Power down the LCD - */ - if (machine_is_p720t()) { - PLD_LCDEN = 0; - PLD_PWR &= ~(PLD_S4_ON|PLD_S3_ON|PLD_S2_ON|PLD_S1_ON); - } + return 0; } -module_init(clps711xfb_init); -module_exit(clps711xfb_exit); +static struct platform_driver clps711x_fb_driver = { + .driver = { + .name = "video-clps711x", + .owner = THIS_MODULE, + }, + .probe = clps711x_fb_probe, + .remove = __devexit_p(clps711x_fb_remove), +}; +module_platform_driver(clps711x_fb_driver); MODULE_AUTHOR("Russell King <rmk@arm.linux.org.uk>"); -MODULE_DESCRIPTION("CLPS711x framebuffer driver"); +MODULE_DESCRIPTION("CLPS711X framebuffer driver"); MODULE_LICENSE("GPL"); |