diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/s390/crypto/ap_bus.c | 189 | ||||
| -rw-r--r-- | drivers/s390/crypto/ap_bus.h | 15 | ||||
| -rw-r--r-- | drivers/s390/crypto/zcrypt_api.c | 63 | ||||
| -rw-r--r-- | drivers/s390/crypto/zcrypt_cca_key.h | 4 | ||||
| -rw-r--r-- | drivers/s390/crypto/zcrypt_error.h | 2 | ||||
| -rw-r--r-- | drivers/s390/crypto/zcrypt_pcicc.c | 4 | ||||
| -rw-r--r-- | drivers/s390/crypto/zcrypt_pcixcc.c | 2 |
7 files changed, 184 insertions, 95 deletions
diff --git a/drivers/s390/crypto/ap_bus.c b/drivers/s390/crypto/ap_bus.c index 7b0b8190129..a1ab3e3efd1 100644 --- a/drivers/s390/crypto/ap_bus.c +++ b/drivers/s390/crypto/ap_bus.c @@ -45,7 +45,7 @@ static int ap_poll_thread_start(void); static void ap_poll_thread_stop(void); static void ap_request_timeout(unsigned long); -/** +/* * Module description. */ MODULE_AUTHOR("IBM Corporation"); @@ -53,7 +53,7 @@ MODULE_DESCRIPTION("Adjunct Processor Bus driver, " "Copyright 2006 IBM Corporation"); MODULE_LICENSE("GPL"); -/** +/* * Module parameter */ int ap_domain_index = -1; /* Adjunct Processor Domain Index */ @@ -69,7 +69,7 @@ static struct device *ap_root_device = NULL; static DEFINE_SPINLOCK(ap_device_lock); static LIST_HEAD(ap_device_list); -/** +/* * Workqueue & timer for bus rescan. */ static struct workqueue_struct *ap_work_queue; @@ -77,7 +77,7 @@ static struct timer_list ap_config_timer; static int ap_config_time = AP_CONFIG_TIME; static DECLARE_WORK(ap_config_work, ap_scan_bus); -/** +/* * Tasklet & timer for AP request polling. */ static struct timer_list ap_poll_timer = TIMER_INITIALIZER(ap_poll_timeout,0,0); @@ -88,9 +88,9 @@ static struct task_struct *ap_poll_kthread = NULL; static DEFINE_MUTEX(ap_poll_thread_mutex); /** - * Test if ap instructions are available. + * ap_intructions_available() - Test if AP instructions are available. * - * Returns 0 if the ap instructions are installed. + * Returns 0 if the AP instructions are installed. */ static inline int ap_instructions_available(void) { @@ -108,12 +108,12 @@ static inline int ap_instructions_available(void) } /** - * Test adjunct processor queue. - * @qid: the ap queue number - * @queue_depth: pointer to queue depth value - * @device_type: pointer to device type value + * ap_test_queue(): Test adjunct processor queue. + * @qid: The AP queue number + * @queue_depth: Pointer to queue depth value + * @device_type: Pointer to device type value * - * Returns ap queue status structure. + * Returns AP queue status structure. */ static inline struct ap_queue_status ap_test_queue(ap_qid_t qid, int *queue_depth, int *device_type) @@ -130,10 +130,10 @@ ap_test_queue(ap_qid_t qid, int *queue_depth, int *device_type) } /** - * Reset adjunct processor queue. - * @qid: the ap queue number + * ap_reset_queue(): Reset adjunct processor queue. + * @qid: The AP queue number * - * Returns ap queue status structure. + * Returns AP queue status structure. */ static inline struct ap_queue_status ap_reset_queue(ap_qid_t qid) { @@ -148,16 +148,14 @@ static inline struct ap_queue_status ap_reset_queue(ap_qid_t qid) } /** - * Send message to adjunct processor queue. - * @qid: the ap queue number - * @psmid: the program supplied message identifier - * @msg: the message text - * @length: the message length - * - * Returns ap queue status structure. + * __ap_send(): Send message to adjunct processor queue. + * @qid: The AP queue number + * @psmid: The program supplied message identifier + * @msg: The message text + * @length: The message length * + * Returns AP queue status structure. * Condition code 1 on NQAP can't happen because the L bit is 1. - * * Condition code 2 on NQAP also means the send is incomplete, * because a segment boundary was reached. The NQAP is repeated. */ @@ -198,23 +196,20 @@ int ap_send(ap_qid_t qid, unsigned long long psmid, void *msg, size_t length) } EXPORT_SYMBOL(ap_send); -/* - * Receive message from adjunct processor queue. - * @qid: the ap queue number - * @psmid: pointer to program supplied message identifier - * @msg: the message text - * @length: the message length - * - * Returns ap queue status structure. +/** + * __ap_recv(): Receive message from adjunct processor queue. + * @qid: The AP queue number + * @psmid: Pointer to program supplied message identifier + * @msg: The message text + * @length: The message length * + * Returns AP queue status structure. * Condition code 1 on DQAP means the receive has taken place * but only partially. The response is incomplete, hence the * DQAP is repeated. - * * Condition code 2 on DQAP also means the receive is incomplete, * this time because a segment boundary was reached. Again, the * DQAP is repeated. - * * Note that gpr2 is used by the DQAP instruction to keep track of * any 'residual' length, in case the instruction gets interrupted. * Hence it gets zeroed before the instruction. @@ -263,11 +258,12 @@ int ap_recv(ap_qid_t qid, unsigned long long *psmid, void *msg, size_t length) EXPORT_SYMBOL(ap_recv); /** - * Check if an AP queue is available. The test is repeated for - * AP_MAX_RESET times. - * @qid: the ap queue number - * @queue_depth: pointer to queue depth value - * @device_type: pointer to device type value + * ap_query_queue(): Check if an AP queue is available. + * @qid: The AP queue number + * @queue_depth: Pointer to queue depth value + * @device_type: Pointer to device type value + * + * The test is repeated for AP_MAX_RESET times. */ static int ap_query_queue(ap_qid_t qid, int *queue_depth, int *device_type) { @@ -308,8 +304,10 @@ static int ap_query_queue(ap_qid_t qid, int *queue_depth, int *device_type) } /** + * ap_init_queue(): Reset an AP queue. + * @qid: The AP queue number + * * Reset an AP queue and wait for it to become available again. - * @qid: the ap queue number */ static int ap_init_queue(ap_qid_t qid) { @@ -346,7 +344,10 @@ static int ap_init_queue(ap_qid_t qid) } /** - * Arm request timeout if a AP device was idle and a new request is submitted. + * ap_increase_queue_count(): Arm request timeout. + * @ap_dev: Pointer to an AP device. + * + * Arm request timeout if an AP device was idle and a new request is submitted. */ static void ap_increase_queue_count(struct ap_device *ap_dev) { @@ -360,7 +361,10 @@ static void ap_increase_queue_count(struct ap_device *ap_dev) } /** - * AP device is still alive, re-schedule request timeout if there are still + * ap_decrease_queue_count(): Decrease queue count. + * @ap_dev: Pointer to an AP device. + * + * If AP device is still alive, re-schedule request timeout if there are still * pending requests. */ static void ap_decrease_queue_count(struct ap_device *ap_dev) @@ -371,7 +375,7 @@ static void ap_decrease_queue_count(struct ap_device *ap_dev) if (ap_dev->queue_count > 0) mod_timer(&ap_dev->timeout, jiffies + timeout); else - /** + /* * The timeout timer should to be disabled now - since * del_timer_sync() is very expensive, we just tell via the * reset flag to ignore the pending timeout timer. @@ -379,7 +383,7 @@ static void ap_decrease_queue_count(struct ap_device *ap_dev) ap_dev->reset = AP_RESET_IGNORE; } -/** +/* * AP device related attributes. */ static ssize_t ap_hwtype_show(struct device *dev, @@ -433,6 +437,10 @@ static struct attribute_group ap_dev_attr_group = { }; /** + * ap_bus_match() + * @dev: Pointer to device + * @drv: Pointer to device_driver + * * AP bus driver registration/unregistration. */ static int ap_bus_match(struct device *dev, struct device_driver *drv) @@ -441,7 +449,7 @@ static int ap_bus_match(struct device *dev, struct device_driver *drv) struct ap_driver *ap_drv = to_ap_drv(drv); struct ap_device_id *id; - /** + /* * Compare device type of the device with the list of * supported types of the device_driver. */ @@ -455,8 +463,12 @@ static int ap_bus_match(struct device *dev, struct device_driver *drv) } /** - * uevent function for AP devices. It sets up a single environment - * variable DEV_TYPE which contains the hardware device type. + * ap_uevent(): Uevent function for AP devices. + * @dev: Pointer to device + * @env: Pointer to kobj_uevent_env + * + * It sets up a single environment variable DEV_TYPE which contains the + * hardware device type. */ static int ap_uevent (struct device *dev, struct kobj_uevent_env *env) { @@ -500,8 +512,10 @@ static int ap_device_probe(struct device *dev) } /** + * __ap_flush_queue(): Flush requests. + * @ap_dev: Pointer to the AP device + * * Flush all requests from the request/pending queue of an AP device. - * @ap_dev: pointer to the AP device. */ static void __ap_flush_queue(struct ap_device *ap_dev) { @@ -565,7 +579,7 @@ void ap_driver_unregister(struct ap_driver *ap_drv) } EXPORT_SYMBOL(ap_driver_unregister); -/** +/* * AP bus attributes. */ static ssize_t ap_domain_show(struct bus_type *bus, char *buf) @@ -630,14 +644,16 @@ static struct bus_attribute *const ap_bus_attrs[] = { }; /** - * Pick one of the 16 ap domains. + * ap_select_domain(): Select an AP domain. + * + * Pick one of the 16 AP domains. */ static int ap_select_domain(void) { int queue_depth, device_type, count, max_count, best_domain; int rc, i, j; - /** + /* * We want to use a single domain. Either the one specified with * the "domain=" parameter or the domain with the maximum number * of devices. @@ -669,8 +685,10 @@ static int ap_select_domain(void) } /** - * Find the device type if query queue returned a device type of 0. + * ap_probe_device_type(): Find the device type of an AP. * @ap_dev: pointer to the AP device. + * + * Find the device type if query queue returned a device type of 0. */ static int ap_probe_device_type(struct ap_device *ap_dev) { @@ -764,7 +782,11 @@ out: } /** - * Scan the ap bus for new devices. + * __ap_scan_bus(): Scan the AP bus. + * @dev: Pointer to device + * @data: Pointer to data + * + * Scan the AP bus for new devices. */ static int __ap_scan_bus(struct device *dev, void *data) { @@ -867,6 +889,8 @@ ap_config_timeout(unsigned long ptr) } /** + * ap_schedule_poll_timer(): Schedule poll timer. + * * Set up the timer to run the poll tasklet */ static inline void ap_schedule_poll_timer(void) @@ -877,10 +901,11 @@ static inline void ap_schedule_poll_timer(void) } /** - * Receive pending reply messages from an AP device. + * ap_poll_read(): Receive pending reply messages from an AP device. * @ap_dev: pointer to the AP device * @flags: pointer to control flags, bit 2^0 is set if another poll is * required, bit 2^1 is set if the poll timer needs to get armed + * * Returns 0 if the device is still present, -ENODEV if not. */ static int ap_poll_read(struct ap_device *ap_dev, unsigned long *flags) @@ -925,10 +950,11 @@ static int ap_poll_read(struct ap_device *ap_dev, unsigned long *flags) } /** - * Send messages from the request queue to an AP device. + * ap_poll_write(): Send messages from the request queue to an AP device. * @ap_dev: pointer to the AP device * @flags: pointer to control flags, bit 2^0 is set if another poll is * required, bit 2^1 is set if the poll timer needs to get armed + * * Returns 0 if the device is still present, -ENODEV if not. */ static int ap_poll_write(struct ap_device *ap_dev, unsigned long *flags) @@ -968,11 +994,13 @@ static int ap_poll_write(struct ap_device *ap_dev, unsigned long *flags) } /** - * Poll AP device for pending replies and send new messages. If either - * ap_poll_read or ap_poll_write returns -ENODEV unregister the device. + * ap_poll_queue(): Poll AP device for pending replies and send new messages. * @ap_dev: pointer to the bus device * @flags: pointer to control flags, bit 2^0 is set if another poll is * required, bit 2^1 is set if the poll timer needs to get armed + * + * Poll AP device for pending replies and send new messages. If either + * ap_poll_read or ap_poll_write returns -ENODEV unregister the device. * Returns 0. */ static inline int ap_poll_queue(struct ap_device *ap_dev, unsigned long *flags) @@ -986,9 +1014,11 @@ static inline int ap_poll_queue(struct ap_device *ap_dev, unsigned long *flags) } /** - * Queue a message to a device. + * __ap_queue_message(): Queue a message to a device. * @ap_dev: pointer to the AP device * @ap_msg: the message to be queued + * + * Queue a message to a device. Returns 0 if successful. */ static int __ap_queue_message(struct ap_device *ap_dev, struct ap_message *ap_msg) { @@ -1055,12 +1085,14 @@ void ap_queue_message(struct ap_device *ap_dev, struct ap_message *ap_msg) EXPORT_SYMBOL(ap_queue_message); /** + * ap_cancel_message(): Cancel a crypto request. + * @ap_dev: The AP device that has the message queued + * @ap_msg: The message that is to be removed + * * Cancel a crypto request. This is done by removing the request - * from the devive pendingq or requestq queue. Note that the + * from the device pending or request queue. Note that the * request stays on the AP queue. When it finishes the message * reply will be discarded because the psmid can't be found. - * @ap_dev: AP device that has the message queued - * @ap_msg: the message that is to be removed */ void ap_cancel_message(struct ap_device *ap_dev, struct ap_message *ap_msg) { @@ -1082,7 +1114,10 @@ void ap_cancel_message(struct ap_device *ap_dev, struct ap_message *ap_msg) EXPORT_SYMBOL(ap_cancel_message); /** - * AP receive polling for finished AP requests + * ap_poll_timeout(): AP receive polling for finished AP requests. + * @unused: Unused variable. + * + * Schedules the AP tasklet. */ static void ap_poll_timeout(unsigned long unused) { @@ -1090,6 +1125,9 @@ static void ap_poll_timeout(unsigned long unused) } /** + * ap_reset(): Reset a not responding AP device. + * @ap_dev: Pointer to the AP device + * * Reset a not responding AP device and move all requests from the * pending queue to the request queue. */ @@ -1108,11 +1146,6 @@ static void ap_reset(struct ap_device *ap_dev) ap_dev->unregistered = 1; } -/** - * Poll all AP devices on the bus in a round robin fashion. Continue - * polling until bit 2^0 of the control flags is not set. If bit 2^1 - * of the control flags has been set arm the poll timer. - */ static int __ap_poll_all(struct ap_device *ap_dev, unsigned long *flags) { spin_lock(&ap_dev->lock); @@ -1126,6 +1159,14 @@ static int __ap_poll_all(struct ap_device *ap_dev, unsigned long *flags) return 0; } +/** + * ap_poll_all(): Poll all AP devices. + * @dummy: Unused variable + * + * Poll all AP devices on the bus in a round robin fashion. Continue + * polling until bit 2^0 of the control flags is not set. If bit 2^1 + * of the control flags has been set arm the poll timer. + */ static void ap_poll_all(unsigned long dummy) { unsigned long flags; @@ -1144,6 +1185,9 @@ static void ap_poll_all(unsigned long dummy) } /** + * ap_poll_thread(): Thread that polls for finished requests. + * @data: Unused pointer + * * AP bus poll thread. The purpose of this thread is to poll for * finished requests in a loop if there is a "free" cpu - that is * a cpu that doesn't have anything better to do. The polling stops @@ -1213,7 +1257,10 @@ static void ap_poll_thread_stop(void) } /** - * Handling of request timeouts + * ap_request_timeout(): Handling of request timeouts + * @data: Holds the AP device. + * + * Handles request timeouts. */ static void ap_request_timeout(unsigned long data) { @@ -1246,7 +1293,9 @@ static struct reset_call ap_reset_call = { }; /** - * The module initialization code. + * ap_module_init(): The module initialization code. + * + * Initializes the module. */ int __init ap_module_init(void) { @@ -1288,7 +1337,7 @@ int __init ap_module_init(void) if (ap_select_domain() == 0) ap_scan_bus(NULL); - /* Setup the ap bus rescan timer. */ + /* Setup the AP bus rescan timer. */ init_timer(&ap_config_timer); ap_config_timer.function = ap_config_timeout; ap_config_timer.data = 0; @@ -1325,7 +1374,9 @@ static int __ap_match_all(struct device *dev, void *data) } /** - * The module termination code + * ap_modules_exit(): The module termination code + * + * Terminates the module. */ void ap_module_exit(void) { diff --git a/drivers/s390/crypto/ap_bus.h b/drivers/s390/crypto/ap_bus.h index 87c2d644287..c1e1200c43f 100644 --- a/drivers/s390/crypto/ap_bus.h +++ b/drivers/s390/crypto/ap_bus.h @@ -50,6 +50,15 @@ typedef unsigned int ap_qid_t; #define AP_QID_QUEUE(_qid) ((_qid) & 15) /** + * structy ap_queue_status - Holds the AP queue status. + * @queue_empty: Shows if queue is empty + * @replies_waiting: Waiting replies + * @queue_full: Is 1 if the queue is full + * @pad: A 4 bit pad + * @int_enabled: Shows if interrupts are enabled for the AP + * @response_conde: Holds the 8 bit response code + * @pad2: A 16 bit pad + * * The ap queue status word is returned by all three AP functions * (PQAP, NQAP and DQAP). There's a set of flags in the first * byte, followed by a 1 byte response code. @@ -75,7 +84,7 @@ struct ap_queue_status { #define AP_RESPONSE_NO_FIRST_PART 0x13 #define AP_RESPONSE_MESSAGE_TOO_BIG 0x15 -/** +/* * Known device types */ #define AP_DEVICE_TYPE_PCICC 3 @@ -84,7 +93,7 @@ struct ap_queue_status { #define AP_DEVICE_TYPE_CEX2A 6 #define AP_DEVICE_TYPE_CEX2C 7 -/** +/* * AP reset flag states */ #define AP_RESET_IGNORE 0 /* request timeout will be ignored */ @@ -152,7 +161,7 @@ struct ap_message { .dev_type=(dt), \ .match_flags=AP_DEVICE_ID_MATCH_DEVICE_TYPE, -/** +/* * Note: don't use ap_send/ap_recv after using ap_queue_message * for the first time. Otherwise the ap message queue will get * confused. diff --git a/drivers/s390/crypto/zcrypt_api.c b/drivers/s390/crypto/zcrypt_api.c index b2740ff2e61..4d36e805a23 100644 --- a/drivers/s390/crypto/zcrypt_api.c +++ b/drivers/s390/crypto/zcrypt_api.c @@ -40,7 +40,7 @@ #include "zcrypt_api.h" -/** +/* * Module description. */ MODULE_AUTHOR("IBM Corporation"); @@ -56,7 +56,7 @@ static atomic_t zcrypt_open_count = ATOMIC_INIT(0); static int zcrypt_rng_device_add(void); static void zcrypt_rng_device_remove(void); -/** +/* * Device attributes common for all crypto devices. */ static ssize_t zcrypt_type_show(struct device *dev, @@ -103,6 +103,9 @@ static struct attribute_group zcrypt_device_attr_group = { }; /** + * __zcrypt_increase_preference(): Increase preference of a crypto device. + * @zdev: Pointer the crypto device + * * Move the device towards the head of the device list. * Need to be called while holding the zcrypt device list lock. * Note: cards with speed_rating of 0 are kept at the end of the list. @@ -129,6 +132,9 @@ static void __zcrypt_increase_preference(struct zcrypt_device *zdev) } /** + * __zcrypt_decrease_preference(): Decrease preference of a crypto device. + * @zdev: Pointer to a crypto device. + * * Move the device towards the tail of the device list. * Need to be called while holding the zcrypt device list lock. * Note: cards with speed_rating of 0 are kept at the end of the list. @@ -202,7 +208,10 @@ void zcrypt_device_free(struct zcrypt_device *zdev) EXPORT_SYMBOL(zcrypt_device_free); /** - * Register a crypto device. + * zcrypt_device_register() - Register a crypto device. + * @zdev: Pointer to a crypto device + * + * Register a crypto device. Returns 0 if successful. */ int zcrypt_device_register(struct zcrypt_device *zdev) { @@ -242,6 +251,9 @@ out: EXPORT_SYMBOL(zcrypt_device_register); /** + * zcrypt_device_unregister(): Unregister a crypto device. + * @zdev: Pointer to crypto device + * * Unregister a crypto device. */ void zcrypt_device_unregister(struct zcrypt_device *zdev) @@ -260,7 +272,9 @@ void zcrypt_device_unregister(struct zcrypt_device *zdev) EXPORT_SYMBOL(zcrypt_device_unregister); /** - * zcrypt_read is not be supported beyond zcrypt 1.3.1 + * zcrypt_read (): Not supported beyond zcrypt 1.3.1. + * + * This function is not supported beyond zcrypt 1.3.1. */ static ssize_t zcrypt_read(struct file *filp, char __user *buf, size_t count, loff_t *f_pos) @@ -269,6 +283,8 @@ static ssize_t zcrypt_read(struct file *filp, char __user *buf, } /** + * zcrypt_write(): Not allowed. + * * Write is is not allowed */ static ssize_t zcrypt_write(struct file *filp, const char __user *buf, @@ -278,7 +294,9 @@ static ssize_t zcrypt_write(struct file *filp, const char __user *buf, } /** - * Device open/close functions to count number of users. + * zcrypt_open(): Count number of users. + * + * Device open function to count number of users. */ static int zcrypt_open(struct inode *inode, struct file *filp) { @@ -286,13 +304,18 @@ static int zcrypt_open(struct inode *inode, struct file *filp) return 0; } +/** + * zcrypt_release(): Count number of users. + * + * Device close function to count number of users. + */ static int zcrypt_release(struct inode *inode, struct file *filp) { atomic_dec(&zcrypt_open_count); return 0; } -/** +/* * zcrypt ioctls. */ static long zcrypt_rsa_modexpo(struct ica_rsa_modexpo *mex) @@ -302,7 +325,7 @@ static long zcrypt_rsa_modexpo(struct ica_rsa_modexpo *mex) if (mex->outputdatalength < mex->inputdatalength) return -EINVAL; - /** + /* * As long as outputdatalength is big enough, we can set the * outputdatalength equal to the inputdatalength, since that is the * number of bytes we will copy in any case @@ -348,7 +371,7 @@ static long zcrypt_rsa_crt(struct ica_rsa_modexpo_crt *crt) if (crt->outputdatalength < crt->inputdatalength || (crt->inputdatalength & 1)) return -EINVAL; - /** + /* * As long as outputdatalength is big enough, we can set the * outputdatalength equal to the inputdatalength, since that is the * number of bytes we will copy in any case @@ -365,7 +388,7 @@ static long zcrypt_rsa_crt(struct ica_rsa_modexpo_crt *crt) zdev->max_mod_size < crt->inputdatalength) continue; if (zdev->short_crt && crt->inputdatalength > 240) { - /** + /* * Check inputdata for leading zeros for cards * that can't handle np_prime, bp_key, or * u_mult_inv > 128 bytes. @@ -381,7 +404,7 @@ static long zcrypt_rsa_crt(struct ica_rsa_modexpo_crt *crt) copy_from_user(&z3, crt->u_mult_inv, len)) return -EFAULT; copied = 1; - /** + /* * We have to restart device lookup - * the device list may have changed by now. */ @@ -567,6 +590,8 @@ static int zcrypt_count_type(int type) } /** + * zcrypt_ica_status(): Old, depracted combi status call. + * * Old, deprecated combi status call. */ static long zcrypt_ica_status(struct file *filp, unsigned long arg) @@ -668,7 +693,7 @@ static long zcrypt_unlocked_ioctl(struct file *filp, unsigned int cmd, (int __user *) arg); case Z90STAT_DOMAIN_INDEX: return put_user(ap_domain_index, (int __user *) arg); - /** + /* * Deprecated ioctls. Don't add another device count ioctl, * you can count them yourself in the user space with the * output of the Z90STAT_STATUS_MASK ioctl. @@ -706,7 +731,7 @@ static long zcrypt_unlocked_ioctl(struct file *filp, unsigned int cmd, } #ifdef CONFIG_COMPAT -/** +/* * ioctl32 conversion routines */ struct compat_ica_rsa_modexpo { @@ -857,7 +882,7 @@ static long zcrypt_compat_ioctl(struct file *filp, unsigned int cmd, } #endif -/** +/* * Misc device file operations. */ static const struct file_operations zcrypt_fops = { @@ -872,7 +897,7 @@ static const struct file_operations zcrypt_fops = { .release = zcrypt_release }; -/** +/* * Misc device. */ static struct miscdevice zcrypt_misc_device = { @@ -881,7 +906,7 @@ static struct miscdevice zcrypt_misc_device = { .fops = &zcrypt_fops, }; -/** +/* * Deprecated /proc entry support. */ static struct proc_dir_entry *zcrypt_entry; @@ -1075,7 +1100,7 @@ static int zcrypt_status_write(struct file *file, const char __user *buffer, } for (j = 0; j < 64 && *ptr; ptr++) { - /** + /* * '0' for no device, '1' for PCICA, '2' for PCICC, * '3' for PCIXCC_MCL2, '4' for PCIXCC_MCL3, * '5' for CEX2C and '6' for CEX2A' @@ -1103,7 +1128,7 @@ static int zcrypt_rng_data_read(struct hwrng *rng, u32 *data) { int rc; - /** + /* * We don't need locking here because the RNG API guarantees serialized * read method calls. */ @@ -1162,6 +1187,8 @@ static void zcrypt_rng_device_remove(void) } /** + * zcrypt_api_init(): Module initialization. + * * The module initialization code. */ int __init zcrypt_api_init(void) @@ -1196,6 +1223,8 @@ out: } /** + * zcrypt_api_exit(): Module termination. + * * The module termination code. */ void zcrypt_api_exit(void) diff --git a/drivers/s390/crypto/zcrypt_cca_key.h b/drivers/s390/crypto/zcrypt_cca_key.h index 8dbcf0eef3e..ed82f2f59b1 100644 --- a/drivers/s390/crypto/zcrypt_cca_key.h +++ b/drivers/s390/crypto/zcrypt_cca_key.h @@ -174,7 +174,7 @@ static inline int zcrypt_type6_mex_key_de(struct ica_rsa_modexpo *mex, key->pvtMeHdr = static_pvt_me_hdr; key->pvtMeSec = static_pvt_me_sec; key->pubMeSec = static_pub_me_sec; - /** + /* * In a private key, the modulus doesn't appear in the public * section. So, an arbitrary public exponent of 0x010001 will be * used. @@ -338,7 +338,7 @@ static inline int zcrypt_type6_crt_key(struct ica_rsa_modexpo_crt *crt, pub = (struct cca_public_sec *)(key->key_parts + key_len); *pub = static_cca_pub_sec; pub->modulus_bit_len = 8 * crt->inputdatalength; - /** + /* * In a private key, the modulus doesn't appear in the public * section. So, an arbitrary public exponent of 0x010001 will be * used. diff --git a/drivers/s390/crypto/zcrypt_error.h b/drivers/s390/crypto/zcrypt_error.h index 2cb616ba8be..3e27fe77d20 100644 --- a/drivers/s390/crypto/zcrypt_error.h +++ b/drivers/s390/crypto/zcrypt_error.h @@ -108,7 +108,7 @@ static inline int convert_error(struct zcrypt_device *zdev, return -EINVAL; case REP82_ERROR_MESSAGE_TYPE: // REP88_ERROR_MESSAGE_TYPE // '20' CEX2A - /** + /* * To sent a message of the wrong type is a bug in the * device driver. Warn about it, disable the device * and then repeat the request. diff --git a/drivers/s390/crypto/zcrypt_pcicc.c b/drivers/s390/crypto/zcrypt_pcicc.c index d6d59bf9ac3..17ea56ce1c1 100644 --- a/drivers/s390/crypto/zcrypt_pcicc.c +++ b/drivers/s390/crypto/zcrypt_pcicc.c @@ -42,7 +42,7 @@ #define PCICC_MAX_MOD_SIZE_OLD 128 /* 1024 bits */ #define PCICC_MAX_MOD_SIZE 256 /* 2048 bits */ -/** +/* * PCICC cards need a speed rating of 0. This keeps them at the end of * the zcrypt device list (see zcrypt_api.c). PCICC cards are only * used if no other cards are present because they are slow and can only @@ -388,7 +388,7 @@ static int convert_type86(struct zcrypt_device *zdev, reply_len = le16_to_cpu(msg->length) - 2; if (reply_len > outputdatalength) return -EINVAL; - /** + /* * For all encipher requests, the length of the ciphertext (reply_len) * will always equal the modulus length. For MEX decipher requests * the output needs to get padded. Minimum pad size is 10. diff --git a/drivers/s390/crypto/zcrypt_pcixcc.c b/drivers/s390/crypto/zcrypt_pcixcc.c index 3674bfa82b6..0bc9b3188e6 100644 --- a/drivers/s390/crypto/zcrypt_pcixcc.c +++ b/drivers/s390/crypto/zcrypt_pcixcc.c @@ -501,7 +501,7 @@ static int convert_type86_ica(struct zcrypt_device *zdev, reply_len = msg->length - 2; if (reply_len > outputdatalength) return -EINVAL; - /** + /* * For all encipher requests, the length of the ciphertext (reply_len) * will always equal the modulus length. For MEX decipher requests * the output needs to get padded. Minimum pad size is 10. |