8 files changed, 8 insertions, 8 deletions
diff --git a/drivers/net/wireless/ath/ath5k/eeprom.c b/drivers/net/wireless/ath/ath5k/eeprom.c
index ed0263672d6..8490348379a 100644
--- a/drivers/net/wireless/ath/ath5k/eeprom.c
+++ b/drivers/net/wireless/ath/ath5k/eeprom.c
@@ -715,7 +715,7 @@ ath5k_eeprom_convert_pcal_info_5111(struct ath5k_hw *ah, int mode,
 
 		/* Only one curve for RF5111
 		 * find out which one and place
-		 * in in pd_curves.
+		 * in pd_curves.
 		 * Note: ee_x_gain is reversed here */
 		for (idx = 0; idx < AR5K_EEPROM_N_PD_CURVES; idx++) {
 
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index 5cf0714f069..ffc9249b02c 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -461,7 +461,7 @@ struct ath9k_hw_version {
 #define AR_GENTMR_BIT(_index)	(1 << (_index))
 
 /*
- * Using de Bruijin sequence to to look up 1's index in a 32 bit number
+ * Using de Bruijin sequence to look up 1's index in a 32 bit number
  * debruijn32 = 0000 0111 0111 1100 1011 0101 0011 0001
  */
 #define debruijn32 0x077CB531U
diff --git a/drivers/net/wireless/iwmc3200wifi/hal.c b/drivers/net/wireless/iwmc3200wifi/hal.c
index 9531b18cf72..907ac890997 100644
--- a/drivers/net/wireless/iwmc3200wifi/hal.c
+++ b/drivers/net/wireless/iwmc3200wifi/hal.c
@@ -54,7 +54,7 @@
  *   LMAC. If you look at LMAC commands you'll se that they
  *   are actually regular iwlwifi target commands encapsulated
  *   into a special UMAC command called UMAC passthrough.
- *   This is due to the fact the the host talks exclusively
+ *   This is due to the fact the host talks exclusively
  *   to the UMAC and so there needs to be a special UMAC
  *   command for talking to the LMAC.
  *   This is how a wifi command is layed out:
diff --git a/drivers/net/wireless/libertas/scan.c b/drivers/net/wireless/libertas/scan.c
index 24cd54b3a80..7d82f13bdf1 100644
--- a/drivers/net/wireless/libertas/scan.c
+++ b/drivers/net/wireless/libertas/scan.c
@@ -666,7 +666,7 @@ void lbs_scan_worker(struct work_struct *work)
 /**
  *  @brief Interpret a BSS scan response returned from the firmware
  *
- *  Parse the various fixed fields and IEs passed back for a a BSS probe
+ *  Parse the various fixed fields and IEs passed back for a BSS probe
  *  response or beacon from the scan command.  Record information as needed
  *  in the scan table struct bss_descriptor for that entry.
  *
diff --git a/drivers/net/wireless/orinoco/hermes_dld.c b/drivers/net/wireless/orinoco/hermes_dld.c
index 6da85e75fce..f750f49bbd4 100644
--- a/drivers/net/wireless/orinoco/hermes_dld.c
+++ b/drivers/net/wireless/orinoco/hermes_dld.c
@@ -68,7 +68,7 @@ struct dblock {
 } __attribute__ ((packed));
 
 /*
- * Plug Data References are located in in the image after the last data
+ * Plug Data References are located in the image after the last data
  * block.  They refer to areas in the adapter memory where the plug data
  * items with matching ID should be written.
  */
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index 3ae468c4d76..2ed32e02a06 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -224,7 +224,7 @@ void rt2x00lib_txdone(struct queue_entry *entry,
 	/*
 	 * If the IV/EIV data was stripped from the frame before it was
 	 * passed to the hardware, we should now reinsert it again because
-	 * mac80211 will expect the the same data to be present it the
+	 * mac80211 will expect the same data to be present it the
 	 * frame as it was passed to us.
 	 */
 	if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags))
diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c
index b0b666019a9..163a8a06b22 100644
--- a/drivers/net/wireless/zd1211rw/zd_mac.c
+++ b/drivers/net/wireless/zd1211rw/zd_mac.c
@@ -855,7 +855,7 @@ int zd_mac_rx(struct ieee80211_hw *hw, const u8 *buffer, unsigned int length)
 	if (skb == NULL)
 		return -ENOMEM;
 	if (need_padding) {
-		/* Make sure the the payload data is 4 byte aligned. */
+		/* Make sure the payload data is 4 byte aligned. */
 		skb_reserve(skb, 2);
 	}
 
diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c
index c257940b71b..818e1480ca9 100644
--- a/drivers/net/wireless/zd1211rw/zd_usb.c
+++ b/drivers/net/wireless/zd1211rw/zd_usb.c
@@ -844,7 +844,7 @@ out:
  * @usb: a &struct zd_usb pointer
  * @urb: URB to be freed
  *
- * Frees the the transmission URB, which means to put it on the free URB
+ * Frees the transmission URB, which means to put it on the free URB
  * list.
  */
 static void free_tx_urb(struct zd_usb *usb, struct urb *urb)