diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/sbus/char/Kconfig | 9 | ||||
| -rw-r--r-- | drivers/sbus/char/Makefile | 2 | ||||
| -rw-r--r-- | drivers/sbus/char/vfc.h | 171 | ||||
| -rw-r--r-- | drivers/sbus/char/vfc_dev.c | 736 | ||||
| -rw-r--r-- | drivers/sbus/char/vfc_i2c.c | 335 | ||||
| -rw-r--r-- | drivers/sbus/char/vfc_i2c.h | 44 |
6 files changed, 0 insertions, 1297 deletions
diff --git a/drivers/sbus/char/Kconfig b/drivers/sbus/char/Kconfig index 9cd54ec63ae..3fd2bc95b51 100644 --- a/drivers/sbus/char/Kconfig +++ b/drivers/sbus/char/Kconfig @@ -30,15 +30,6 @@ config OBP_FLASH The OpenBoot PROM on Ultra systems is flashable. If you want to be able to upgrade the OBP firmware, say Y here. -config SUN_VIDEOPIX - tristate "Videopix Frame Grabber (EXPERIMENTAL)" - depends on EXPERIMENTAL && (BROKEN || !64BIT) - help - Say Y here to support the Videopix Frame Grabber from Sun - Microsystems, commonly found on SPARCstations. This card, which is - based on the Phillips SAA9051, can handle NTSC and PAL/SECAM and - SVIDEO signals. - config TADPOLE_TS102_UCTRL tristate "Tadpole TS102 Microcontroller support (EXPERIMENTAL)" depends on EXPERIMENTAL && SPARC32 diff --git a/drivers/sbus/char/Makefile b/drivers/sbus/char/Makefile index d8b2d0c0ebd..e15bd5e3946 100644 --- a/drivers/sbus/char/Makefile +++ b/drivers/sbus/char/Makefile @@ -7,7 +7,6 @@ # Rewritten to use lists instead of if-statements. # -vfc-objs := vfc_dev.o vfc_i2c.o bbc-objs := bbc_i2c.o bbc_envctrl.o obj-$(CONFIG_ENVCTRL) += envctrl.o @@ -17,7 +16,6 @@ obj-$(CONFIG_WATCHDOG_RIO) += riowatchdog.o obj-$(CONFIG_OBP_FLASH) += flash.o obj-$(CONFIG_SUN_OPENPROMIO) += openprom.o obj-$(CONFIG_SUN_MOSTEK_RTC) += rtc.o -obj-$(CONFIG_SUN_VIDEOPIX) += vfc.o obj-$(CONFIG_TADPOLE_TS102_UCTRL) += uctrl.o obj-$(CONFIG_SUN_JSFLASH) += jsflash.o obj-$(CONFIG_BBC_I2C) += bbc.o diff --git a/drivers/sbus/char/vfc.h b/drivers/sbus/char/vfc.h deleted file mode 100644 index a5240c52aa0..00000000000 --- a/drivers/sbus/char/vfc.h +++ /dev/null @@ -1,171 +0,0 @@ -#ifndef _LINUX_VFC_H_ -#define _LINUX_VFC_H_ - -/* - * The control register for the vfc is at offset 0x4000 - * The first field ram bank is located at offset 0x5000 - * The second field ram bank is at offset 0x7000 - * i2c_reg address the Phillips PCF8584(see notes in vfc_i2c.c) - * data and transmit register. - * i2c_s1 controls register s1 of the PCF8584 - * i2c_write seems to be similar to i2c_write but I am not - * quite sure why sun uses it - * - * I am also not sure whether or not you can read the fram bank as a - * whole or whether you must read each word individually from offset - * 0x5000 as soon as I figure it out I will update this file */ - -struct vfc_regs { - char pad1[0x4000]; - unsigned int control; /* Offset 0x4000 */ - char pad2[0xffb]; /* from offset 0x4004 to 0x5000 */ - unsigned int fram_bank1; /* Offset 0x5000 */ - char pad3[0xffb]; /* from offset 0x5004 to 0x6000 */ - unsigned int i2c_reg; /* Offset 0x6000 */ - unsigned int i2c_magic2; /* Offset 0x6004 */ - unsigned int i2c_s1; /* Offset 0x6008 */ - unsigned int i2c_write; /* Offset 0x600c */ - char pad4[0xff0]; /* from offset 0x6010 to 0x7000 */ - unsigned int fram_bank2; /* Offset 0x7000 */ - char pad5[0x1000]; -}; - -#define VFC_SAA9051_NR (13) -#define VFC_SAA9051_ADDR (0x8a) - /* The saa9051 returns the following for its status - * bit 0 - 0 - * bit 1 - SECAM color detected (1=found,0=not found) - * bit 2 - COLOR detected (1=found,0=not found) - * bit 3 - 0 - * bit 4 - Field frequency bit (1=60Hz (NTSC), 0=50Hz (PAL)) - * bit 5 - 1 - * bit 6 - horizontal frequency lock (1=transmitter found, - * 0=no transmitter) - * bit 7 - Power on reset bit (1=reset,0=at least one successful - * read of the status byte) - */ - -#define VFC_SAA9051_PONRES (0x80) -#define VFC_SAA9051_HLOCK (0x40) -#define VFC_SAA9051_FD (0x10) -#define VFC_SAA9051_CD (0x04) -#define VFC_SAA9051_CS (0x02) - - -/* The various saa9051 sub addresses */ - -#define VFC_SAA9051_IDEL (0) -#define VFC_SAA9051_HSY_START (1) -#define VFC_SAA9051_HSY_STOP (2) -#define VFC_SAA9051_HC_START (3) -#define VFC_SAA9051_HC_STOP (4) -#define VFC_SAA9051_HS_START (5) -#define VFC_SAA9051_HORIZ_PEAK (6) -#define VFC_SAA9051_HUE (7) -#define VFC_SAA9051_C1 (8) -#define VFC_SAA9051_C2 (9) -#define VFC_SAA9051_C3 (0xa) -#define VFC_SAA9051_SECAM_DELAY (0xb) - - -/* Bit settings for saa9051 sub address 0x06 */ - -#define VFC_SAA9051_AP1 (0x01) -#define VFC_SAA9051_AP2 (0x02) -#define VFC_SAA9051_COR1 (0x04) -#define VFC_SAA9051_COR2 (0x08) -#define VFC_SAA9051_BP1 (0x10) -#define VFC_SAA9051_BP2 (0x20) -#define VFC_SAA9051_PF (0x40) -#define VFC_SAA9051_BY (0x80) - - -/* Bit settings for saa9051 sub address 0x08 */ - -#define VFC_SAA9051_CCFR0 (0x01) -#define VFC_SAA9051_CCFR1 (0x02) -#define VFC_SAA9051_YPN (0x04) -#define VFC_SAA9051_ALT (0x08) -#define VFC_SAA9051_CO (0x10) -#define VFC_SAA9051_VTR (0x20) -#define VFC_SAA9051_FS (0x40) -#define VFC_SAA9051_HPLL (0x80) - - -/* Bit settings for saa9051 sub address 9 */ - -#define VFC_SAA9051_SS0 (0x01) -#define VFC_SAA9051_SS1 (0x02) -#define VFC_SAA9051_AFCC (0x04) -#define VFC_SAA9051_CI (0x08) -#define VFC_SAA9051_SA9D4 (0x10) /* Don't care bit */ -#define VFC_SAA9051_OEC (0x20) -#define VFC_SAA9051_OEY (0x40) -#define VFC_SAA9051_VNL (0x80) - - -/* Bit settings for saa9051 sub address 0x0A */ - -#define VFC_SAA9051_YDL0 (0x01) -#define VFC_SAA9051_YDL1 (0x02) -#define VFC_SAA9051_YDL2 (0x04) -#define VFC_SAA9051_SS2 (0x08) -#define VFC_SAA9051_SS3 (0x10) -#define VFC_SAA9051_YC (0x20) -#define VFC_SAA9051_CT (0x40) -#define VFC_SAA9051_SYC (0x80) - - -#define VFC_SAA9051_SA(a,b) ((a)->saa9051_state_array[(b)+1]) -#define vfc_update_saa9051(a) (vfc_i2c_sendbuf((a),VFC_SAA9051_ADDR,\ - (a)->saa9051_state_array,\ - VFC_SAA9051_NR)) - - -struct vfc_dev { - volatile struct vfc_regs __iomem *regs; - struct vfc_regs *phys_regs; - unsigned int control_reg; - struct mutex device_lock_mtx; - int instance; - int busy; - unsigned long which_io; - unsigned char saa9051_state_array[VFC_SAA9051_NR]; -}; - -void captstat_reset(struct vfc_dev *); -void memptr_reset(struct vfc_dev *); - -int vfc_pcf8584_init(struct vfc_dev *); -void vfc_i2c_delay_no_busy(struct vfc_dev *, unsigned long); -void vfc_i2c_delay(struct vfc_dev *); -int vfc_i2c_sendbuf(struct vfc_dev *, unsigned char, char *, int) ; -int vfc_i2c_recvbuf(struct vfc_dev *, unsigned char, char *, int) ; -int vfc_i2c_reset_bus(struct vfc_dev *); -int vfc_init_i2c_bus(struct vfc_dev *); - -#define VFC_CONTROL_DIAGMODE 0x10000000 -#define VFC_CONTROL_MEMPTR 0x20000000 -#define VFC_CONTROL_CAPTURE 0x02000000 -#define VFC_CONTROL_CAPTRESET 0x04000000 - -#define VFC_STATUS_CAPTURE 0x08000000 - -#ifdef VFC_IOCTL_DEBUG -#define VFC_IOCTL_DEBUG_PRINTK(a) printk a -#else -#define VFC_IOCTL_DEBUG_PRINTK(a) -#endif - -#ifdef VFC_I2C_DEBUG -#define VFC_I2C_DEBUG_PRINTK(a) printk a -#else -#define VFC_I2C_DEBUG_PRINTK(a) -#endif - -#endif /* _LINUX_VFC_H_ */ - - - - - diff --git a/drivers/sbus/char/vfc_dev.c b/drivers/sbus/char/vfc_dev.c deleted file mode 100644 index 25181bb7d62..00000000000 --- a/drivers/sbus/char/vfc_dev.c +++ /dev/null @@ -1,736 +0,0 @@ -/* - * drivers/sbus/char/vfc_dev.c - * - * Driver for the Videopix Frame Grabber. - * - * In order to use the VFC you need to program the video controller - * chip. This chip is the Phillips SAA9051. You need to call their - * documentation ordering line to get the docs. - * - * There is very little documentation on the VFC itself. There is - * some useful info that can be found in the manuals that come with - * the card. I will hopefully write some better docs at a later date. - * - * Copyright (C) 1996 Manish Vachharajani (mvachhar@noc.rutgers.edu) - * */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/slab.h> -#include <linux/errno.h> -#include <linux/fs.h> -#include <linux/delay.h> -#include <linux/spinlock.h> -#include <linux/mutex.h> -#include <linux/mm.h> -#include <linux/smp_lock.h> - -#include <asm/openprom.h> -#include <asm/oplib.h> -#include <asm/io.h> -#include <asm/system.h> -#include <asm/sbus.h> -#include <asm/page.h> -#include <asm/pgtable.h> -#include <asm/uaccess.h> - -#define VFC_MAJOR (60) - -#if 0 -#define VFC_IOCTL_DEBUG -#endif - -#include "vfc.h" -#include <asm/vfc_ioctls.h> - -static const struct file_operations vfc_fops; -static struct vfc_dev **vfc_dev_lst; -static char vfcstr[]="vfc"; -static unsigned char saa9051_init_array[VFC_SAA9051_NR] = { - 0x00, 0x64, 0x72, 0x52, - 0x36, 0x18, 0xff, 0x20, - 0xfc, 0x77, 0xe3, 0x50, - 0x3e -}; - -static void vfc_lock_device(struct vfc_dev *dev) -{ - mutex_lock(&dev->device_lock_mtx); -} - -static void vfc_unlock_device(struct vfc_dev *dev) -{ - mutex_unlock(&dev->device_lock_mtx); -} - - -static void vfc_captstat_reset(struct vfc_dev *dev) -{ - dev->control_reg |= VFC_CONTROL_CAPTRESET; - sbus_writel(dev->control_reg, &dev->regs->control); - dev->control_reg &= ~VFC_CONTROL_CAPTRESET; - sbus_writel(dev->control_reg, &dev->regs->control); - dev->control_reg |= VFC_CONTROL_CAPTRESET; - sbus_writel(dev->control_reg, &dev->regs->control); -} - -static void vfc_memptr_reset(struct vfc_dev *dev) -{ - dev->control_reg |= VFC_CONTROL_MEMPTR; - sbus_writel(dev->control_reg, &dev->regs->control); - dev->control_reg &= ~VFC_CONTROL_MEMPTR; - sbus_writel(dev->control_reg, &dev->regs->control); - dev->control_reg |= VFC_CONTROL_MEMPTR; - sbus_writel(dev->control_reg, &dev->regs->control); -} - -static int vfc_csr_init(struct vfc_dev *dev) -{ - dev->control_reg = 0x80000000; - sbus_writel(dev->control_reg, &dev->regs->control); - udelay(200); - dev->control_reg &= ~0x80000000; - sbus_writel(dev->control_reg, &dev->regs->control); - udelay(100); - sbus_writel(0x0f000000, &dev->regs->i2c_magic2); - - vfc_memptr_reset(dev); - - dev->control_reg &= ~VFC_CONTROL_DIAGMODE; - dev->control_reg &= ~VFC_CONTROL_CAPTURE; - dev->control_reg |= 0x40000000; - sbus_writel(dev->control_reg, &dev->regs->control); - - vfc_captstat_reset(dev); - - return 0; -} - -static int vfc_saa9051_init(struct vfc_dev *dev) -{ - int i; - - for (i = 0; i < VFC_SAA9051_NR; i++) - dev->saa9051_state_array[i] = saa9051_init_array[i]; - - vfc_i2c_sendbuf(dev,VFC_SAA9051_ADDR, - dev->saa9051_state_array, VFC_SAA9051_NR); - return 0; -} - -static int init_vfc_hw(struct vfc_dev *dev) -{ - vfc_lock_device(dev); - vfc_csr_init(dev); - - vfc_pcf8584_init(dev); - vfc_init_i2c_bus(dev); /* hopefully this doesn't undo the magic - sun code above*/ - vfc_saa9051_init(dev); - vfc_unlock_device(dev); - return 0; -} - -static int init_vfc_devstruct(struct vfc_dev *dev, int instance) -{ - dev->instance=instance; - mutex_init(&dev->device_lock_mtx); - dev->control_reg=0; - dev->busy=0; - return 0; -} - -static int init_vfc_device(struct sbus_dev *sdev,struct vfc_dev *dev, - int instance) -{ - if(dev == NULL) { - printk(KERN_ERR "VFC: Bogus pointer passed\n"); - return -ENOMEM; - } - printk("Initializing vfc%d\n",instance); - dev->regs = NULL; - dev->regs = (volatile struct vfc_regs __iomem *) - sbus_ioremap(&sdev->resource[0], 0, - sizeof(struct vfc_regs), vfcstr); - dev->which_io = sdev->reg_addrs[0].which_io; - dev->phys_regs = (struct vfc_regs *) sdev->reg_addrs[0].phys_addr; - if (dev->regs == NULL) - return -EIO; - - printk("vfc%d: registers mapped at phys_addr: 0x%lx\n virt_addr: 0x%lx\n", - instance,(unsigned long)sdev->reg_addrs[0].phys_addr,(unsigned long)dev->regs); - - if (init_vfc_devstruct(dev, instance)) - return -EINVAL; - if (init_vfc_hw(dev)) - return -EIO; - return 0; -} - - -static struct vfc_dev *vfc_get_dev_ptr(int instance) -{ - return vfc_dev_lst[instance]; -} - -static DEFINE_SPINLOCK(vfc_dev_lock); - -static int vfc_open(struct inode *inode, struct file *file) -{ - struct vfc_dev *dev; - - lock_kernel(); - spin_lock(&vfc_dev_lock); - dev = vfc_get_dev_ptr(iminor(inode)); - if (dev == NULL) { - spin_unlock(&vfc_dev_lock); - unlock_kernel(); - return -ENODEV; - } - if (dev->busy) { - spin_unlock(&vfc_dev_lock); - unlock_kernel(); - return -EBUSY; - } - - dev->busy = 1; - spin_unlock(&vfc_dev_lock); - - vfc_lock_device(dev); - - vfc_csr_init(dev); - vfc_pcf8584_init(dev); - vfc_init_i2c_bus(dev); - vfc_saa9051_init(dev); - vfc_memptr_reset(dev); - vfc_captstat_reset(dev); - - vfc_unlock_device(dev); - unlock_kernel(); - return 0; -} - -static int vfc_release(struct inode *inode,struct file *file) -{ - struct vfc_dev *dev; - - spin_lock(&vfc_dev_lock); - dev = vfc_get_dev_ptr(iminor(inode)); - if (!dev || !dev->busy) { - spin_unlock(&vfc_dev_lock); - return -EINVAL; - } - dev->busy = 0; - spin_unlock(&vfc_dev_lock); - return 0; -} - -static int vfc_debug(struct vfc_dev *dev, int cmd, void __user *argp) -{ - struct vfc_debug_inout inout; - unsigned char *buffer; - - if (!capable(CAP_SYS_ADMIN)) - return -EPERM; - - switch(cmd) { - case VFC_I2C_SEND: - if(copy_from_user(&inout, argp, sizeof(inout))) - return -EFAULT; - - buffer = kmalloc(inout.len, GFP_KERNEL); - if (buffer == NULL) - return -ENOMEM; - - if(copy_from_user(buffer, inout.buffer, inout.len)) { - kfree(buffer); - return -EFAULT; - } - - - vfc_lock_device(dev); - inout.ret= - vfc_i2c_sendbuf(dev,inout.addr & 0xff, - buffer,inout.len); - - if (copy_to_user(argp,&inout,sizeof(inout))) { - vfc_unlock_device(dev); - kfree(buffer); - return -EFAULT; - } - vfc_unlock_device(dev); - - break; - case VFC_I2C_RECV: - if (copy_from_user(&inout, argp, sizeof(inout))) - return -EFAULT; - - buffer = kzalloc(inout.len, GFP_KERNEL); - if (buffer == NULL) - return -ENOMEM; - - vfc_lock_device(dev); - inout.ret= - vfc_i2c_recvbuf(dev,inout.addr & 0xff - ,buffer,inout.len); - vfc_unlock_device(dev); - - if (copy_to_user(inout.buffer, buffer, inout.len)) { - kfree(buffer); - return -EFAULT; - } - if (copy_to_user(argp,&inout,sizeof(inout))) { - kfree(buffer); - return -EFAULT; - } - kfree(buffer); - break; - default: - return -EINVAL; - }; - - return 0; -} - -static int vfc_capture_start(struct vfc_dev *dev) -{ - vfc_captstat_reset(dev); - dev->control_reg = sbus_readl(&dev->regs->control); - if((dev->control_reg & VFC_STATUS_CAPTURE)) { - printk(KERN_ERR "vfc%d: vfc capture status not reset\n", - dev->instance); - return -EIO; - } - - vfc_lock_device(dev); - dev->control_reg &= ~VFC_CONTROL_CAPTURE; - sbus_writel(dev->control_reg, &dev->regs->control); - dev->control_reg |= VFC_CONTROL_CAPTURE; - sbus_writel(dev->control_reg, &dev->regs->control); - dev->control_reg &= ~VFC_CONTROL_CAPTURE; - sbus_writel(dev->control_reg, &dev->regs->control); - vfc_unlock_device(dev); - - return 0; -} - -static int vfc_capture_poll(struct vfc_dev *dev) -{ - int timeout = 1000; - - while (!timeout--) { - if (sbus_readl(&dev->regs->control) & VFC_STATUS_CAPTURE) - break; - vfc_i2c_delay_no_busy(dev, 100); - } - if(!timeout) { - printk(KERN_WARNING "vfc%d: capture timed out\n", - dev->instance); - return -ETIMEDOUT; - } - return 0; -} - - - -static int vfc_set_control_ioctl(struct inode *inode, struct file *file, - struct vfc_dev *dev, unsigned long arg) -{ - int setcmd, ret = 0; - - if (copy_from_user(&setcmd,(void __user *)arg,sizeof(unsigned int))) - return -EFAULT; - - VFC_IOCTL_DEBUG_PRINTK(("vfc%d: IOCTL(VFCSCTRL) arg=0x%x\n", - dev->instance,setcmd)); - - switch(setcmd) { - case MEMPRST: - vfc_lock_device(dev); - vfc_memptr_reset(dev); - vfc_unlock_device(dev); - ret=0; - break; - case CAPTRCMD: - vfc_capture_start(dev); - vfc_capture_poll(dev); - break; - case DIAGMODE: - if(capable(CAP_SYS_ADMIN)) { - vfc_lock_device(dev); - dev->control_reg |= VFC_CONTROL_DIAGMODE; - sbus_writel(dev->control_reg, &dev->regs->control); - vfc_unlock_device(dev); - ret = 0; - } else { - ret = -EPERM; - } - break; - case NORMMODE: - vfc_lock_device(dev); - dev->control_reg &= ~VFC_CONTROL_DIAGMODE; - sbus_writel(dev->control_reg, &dev->regs->control); - vfc_unlock_device(dev); - ret = 0; - break; - case CAPTRSTR: - vfc_capture_start(dev); - ret = 0; - break; - case CAPTRWAIT: - vfc_capture_poll(dev); - ret = 0; - break; - default: - ret = -EINVAL; - break; - }; - - return ret; -} - - -static int vfc_port_change_ioctl(struct inode *inode, struct file *file, - struct vfc_dev *dev, unsigned long arg) -{ - int ret = 0; - int cmd; - - if(copy_from_user(&cmd, (void __user *)arg, sizeof(unsigned int))) { - VFC_IOCTL_DEBUG_PRINTK(("vfc%d: User passed bogus pointer to " - "vfc_port_change_ioctl\n", - dev->instance)); - return -EFAULT; - } - - VFC_IOCTL_DEBUG_PRINTK(("vfc%d: IOCTL(VFCPORTCHG) arg=0x%x\n", - dev->instance, cmd)); - - switch(cmd) { - case 1: - case 2: - VFC_SAA9051_SA(dev,VFC_SAA9051_HSY_START) = 0x72; - VFC_SAA9051_SA(dev,VFC_SAA9051_HSY_STOP) = 0x52; - VFC_SAA9051_SA(dev,VFC_SAA9051_HC_START) = 0x36; - VFC_SAA9051_SA(dev,VFC_SAA9051_HC_STOP) = 0x18; - VFC_SAA9051_SA(dev,VFC_SAA9051_HORIZ_PEAK) = VFC_SAA9051_BP2; - VFC_SAA9051_SA(dev,VFC_SAA9051_C3) = VFC_SAA9051_CT | VFC_SAA9051_SS3; - VFC_SAA9051_SA(dev,VFC_SAA9051_SECAM_DELAY) = 0x3e; - break; - case 3: - VFC_SAA9051_SA(dev,VFC_SAA9051_HSY_START) = 0x3a; - VFC_SAA9051_SA(dev,VFC_SAA9051_HSY_STOP) = 0x17; - VFC_SAA9051_SA(dev,VFC_SAA9051_HC_START) = 0xfa; - VFC_SAA9051_SA(dev,VFC_SAA9051_HC_STOP) = 0xde; - VFC_SAA9051_SA(dev,VFC_SAA9051_HORIZ_PEAK) = - VFC_SAA9051_BY | VFC_SAA9051_PF | VFC_SAA9051_BP2; - VFC_SAA9051_SA(dev,VFC_SAA9051_C3) = VFC_SAA9051_YC; - VFC_SAA9051_SA(dev,VFC_SAA9051_SECAM_DELAY) = 0; - VFC_SAA9051_SA(dev,VFC_SAA9051_C2) &= - ~(VFC_SAA9051_SS0 | VFC_SAA9051_SS1); - break; - default: - ret = -EINVAL; - return ret; - break; - } - - switch(cmd) { - case 1: - VFC_SAA9051_SA(dev,VFC_SAA9051_C2) |= - (VFC_SAA9051_SS0 | VFC_SAA9051_SS1); - break; - case 2: - VFC_SAA9051_SA(dev,VFC_SAA9051_C2) &= - ~(VFC_SAA9051_SS0 | VFC_SAA9051_SS1); - VFC_SAA9051_SA(dev,VFC_SAA9051_C2) |= VFC_SAA9051_SS0; - break; - case 3: - break; - default: - ret = -EINVAL; - return ret; - break; - } - VFC_SAA9051_SA(dev,VFC_SAA9051_C3) &= ~(VFC_SAA9051_SS2); - ret=vfc_update_saa9051(dev); - udelay(500); - VFC_SAA9051_SA(dev,VFC_SAA9051_C3) |= (VFC_SAA9051_SS2); - ret=vfc_update_saa9051(dev); - return ret; -} - -static int vfc_set_video_ioctl(struct inode *inode, struct file *file, - struct vfc_dev *dev, unsigned long arg) -{ - int ret = 0; - int cmd; - - if(copy_from_user(&cmd, (void __user *)arg, sizeof(unsigned int))) { - VFC_IOCTL_DEBUG_PRINTK(("vfc%d: User passed bogus pointer to " - "vfc_set_video_ioctl\n", - dev->instance)); - return ret; - } - - VFC_IOCTL_DEBUG_PRINTK(("vfc%d: IOCTL(VFCSVID) arg=0x%x\n", - dev->instance, cmd)); - switch(cmd) { - case STD_NTSC: - VFC_SAA9051_SA(dev,VFC_SAA9051_C1) &= ~VFC_SAA9051_ALT; - VFC_SAA9051_SA(dev,VFC_SAA9051_C1) |= VFC_SAA9051_YPN | - VFC_SAA9051_CCFR0 | VFC_SAA9051_CCFR1 | VFC_SAA9051_FS; - ret = vfc_update_saa9051(dev); - break; - case STD_PAL: - VFC_SAA9051_SA(dev,VFC_SAA9051_C1) &= ~(VFC_SAA9051_YPN | - VFC_SAA9051_CCFR1 | - VFC_SAA9051_CCFR0 | - VFC_SAA9051_FS); - VFC_SAA9051_SA(dev,VFC_SAA9051_C1) |= VFC_SAA9051_ALT; - ret = vfc_update_saa9051(dev); - break; - - case COLOR_ON: - VFC_SAA9051_SA(dev,VFC_SAA9051_C1) |= VFC_SAA9051_CO; - VFC_SAA9051_SA(dev,VFC_SAA9051_HORIZ_PEAK) &= - ~(VFC_SAA9051_BY | VFC_SAA9051_PF); - ret = vfc_update_saa9051(dev); - break; - case MONO: - VFC_SAA9051_SA(dev,VFC_SAA9051_C1) &= ~(VFC_SAA9051_CO); - VFC_SAA9051_SA(dev,VFC_SAA9051_HORIZ_PEAK) |= - (VFC_SAA9051_BY | VFC_SAA9051_PF); - ret = vfc_update_saa9051(dev); - break; - default: - ret = -EINVAL; - break; - }; - - return ret; -} - -static int vfc_get_video_ioctl(struct inode *inode, struct file *file, - struct vfc_dev *dev, unsigned long arg) -{ - int ret = 0; - unsigned int status = NO_LOCK; - unsigned char buf[1]; - - if(vfc_i2c_recvbuf(dev, VFC_SAA9051_ADDR, buf, 1)) { - printk(KERN_ERR "vfc%d: Unable to get status\n", - dev->instance); - return -EIO; - } - - if(buf[0] & VFC_SAA9051_HLOCK) { - status = NO_LOCK; - } else if(buf[0] & VFC_SAA9051_FD) { - if(buf[0] & VFC_SAA9051_CD) - status = NTSC_COLOR; - else - status = NTSC_NOCOLOR; - } else { - if(buf[0] & VFC_SAA9051_CD) - status = PAL_COLOR; - else - status = PAL_NOCOLOR; - } - VFC_IOCTL_DEBUG_PRINTK(("vfc%d: IOCTL(VFCGVID) returning status 0x%x; " - "buf[0]=%x\n", dev->instance, status, buf[0])); - - if (copy_to_user((void __user *)arg,&status,sizeof(unsigned int))) { - VFC_IOCTL_DEBUG_PRINTK(("vfc%d: User passed bogus pointer to " - "vfc_get_video_ioctl\n", - dev->instance)); - return ret; - } - return ret; -} - -static int vfc_ioctl(struct inode *inode, struct file *file, unsigned int cmd, - unsigned long arg) -{ - int ret = 0; - unsigned int tmp; - struct vfc_dev *dev; - void __user *argp = (void __user *)arg; - - dev = vfc_get_dev_ptr(iminor(inode)); - if(dev == NULL) - return -ENODEV; - - switch(cmd & 0x0000ffff) { - case VFCGCTRL: -#if 0 - VFC_IOCTL_DEBUG_PRINTK(("vfc%d: IOCTL(VFCGCTRL)\n", dev->instance)); -#endif - tmp = sbus_readl(&dev->regs->control); - if(copy_to_user(argp, &tmp, sizeof(unsigned int))) { - ret = -EFAULT; - break; - } - ret = 0; - break; - case VFCSCTRL: - ret = vfc_set_control_ioctl(inode, file, dev, arg); - break; - case VFCGVID: - ret = vfc_get_video_ioctl(inode, file, dev, arg); - break; - case VFCSVID: - ret = vfc_set_video_ioctl(inode, file, dev, arg); - break; - case VFCHUE: - VFC_IOCTL_DEBUG_PRINTK(("vfc%d: IOCTL(VFCHUE)\n", dev->instance)); - if(copy_from_user(&tmp,argp,sizeof(unsigned int))) { - VFC_IOCTL_DEBUG_PRINTK(("vfc%d: User passed bogus pointer " - "to IOCTL(VFCHUE)", dev->instance)); - ret = -EFAULT; - } else { - VFC_SAA9051_SA(dev,VFC_SAA9051_HUE) = tmp; - vfc_update_saa9051(dev); - ret = 0; - } - break; - case VFCPORTCHG: - ret = vfc_port_change_ioctl(inode, file, dev, arg); - break; - case VFCRDINFO: - ret = -EINVAL; - VFC_IOCTL_DEBUG_PRINTK(("vfc%d: IOCTL(VFCRDINFO)\n", dev->instance)); - break; - default: - ret = vfc_debug(vfc_get_dev_ptr(iminor(inode)), cmd, argp); - break; - }; - - return ret; -} - -static int vfc_mmap(struct file *file, struct vm_area_struct *vma) -{ - unsigned int map_size, ret, map_offset; - struct vfc_dev *dev; - - dev = vfc_get_dev_ptr(iminor(file->f_path.dentry->d_inode)); - if(dev == NULL) - return -ENODEV; - - map_size = vma->vm_end - vma->vm_start; - if(map_size > sizeof(struct vfc_regs)) - map_size = sizeof(struct vfc_regs); - - vma->vm_flags |= - (VM_MAYREAD | VM_MAYWRITE | VM_MAYSHARE); - map_offset = (unsigned int) (long)dev->phys_regs; - ret = io_remap_pfn_range(vma, vma->vm_start, - MK_IOSPACE_PFN(dev->which_io, - map_offset >> PAGE_SHIFT), - map_size, vma->vm_page_prot); - - if(ret) - return -EAGAIN; - - return 0; -} - - -static const struct file_operations vfc_fops = { - .owner = THIS_MODULE, - .llseek = no_llseek, - .ioctl = vfc_ioctl, - .mmap = vfc_mmap, - .open = vfc_open, - .release = vfc_release, -}; - -static int vfc_probe(void) -{ - struct sbus_bus *sbus; - struct sbus_dev *sdev = NULL; - int ret; - int instance = 0, cards = 0; - - for_all_sbusdev(sdev, sbus) { - if (strcmp(sdev->prom_name, "vfc") == 0) { - cards++; - continue; - } - } - - if (!cards) - return -ENODEV; - - vfc_dev_lst = kcalloc(cards + 1, sizeof(struct vfc_dev*), GFP_KERNEL); - if (vfc_dev_lst == NULL) - return -ENOMEM; - vfc_dev_lst[cards] = NULL; - - ret = register_chrdev(VFC_MAJOR, vfcstr, &vfc_fops); - if(ret) { - printk(KERN_ERR "Unable to get major number %d\n", VFC_MAJOR); - kfree(vfc_dev_lst); - return -EIO; - } - instance = 0; - for_all_sbusdev(sdev, sbus) { - if (strcmp(sdev->prom_name, "vfc") == 0) { - vfc_dev_lst[instance]=(struct vfc_dev *) - kmalloc(sizeof(struct vfc_dev), GFP_KERNEL); - if (vfc_dev_lst[instance] == NULL) - return -ENOMEM; - ret = init_vfc_device(sdev, - vfc_dev_lst[instance], - instance); - if(ret) { - printk(KERN_ERR "Unable to initialize" - " vfc%d device\n", - instance); - } else { - } - - instance++; - continue; - } - } - - return 0; -} - -#ifdef MODULE -int init_module(void) -#else -int vfc_init(void) -#endif -{ - return vfc_probe(); -} - -#ifdef MODULE -static void deinit_vfc_device(struct vfc_dev *dev) -{ - if(dev == NULL) - return; - sbus_iounmap(dev->regs, sizeof(struct vfc_regs)); - kfree(dev); -} - -void cleanup_module(void) -{ - struct vfc_dev **devp; - - unregister_chrdev(VFC_MAJOR,vfcstr); - - for (devp = vfc_dev_lst; *devp; devp++) - deinit_vfc_device(*devp); - - kfree(vfc_dev_lst); - return; -} -#endif - -MODULE_LICENSE("GPL"); - diff --git a/drivers/sbus/char/vfc_i2c.c b/drivers/sbus/char/vfc_i2c.c deleted file mode 100644 index 32b986e0ed7..00000000000 --- a/drivers/sbus/char/vfc_i2c.c +++ /dev/null @@ -1,335 +0,0 @@ -/* - * drivers/sbus/char/vfc_i2c.c - * - * Driver for the Videopix Frame Grabber. - * - * Functions that support the Phillips i2c(I squared C) bus on the vfc - * Documentation for the Phillips I2C bus can be found on the - * phillips home page - * - * Copyright (C) 1996 Manish Vachharajani (mvachhar@noc.rutgers.edu) - * - */ - -/* NOTE: It seems to me that the documentation regarding the -pcd8584t/pcf8584 does not show the correct way to address the i2c bus. -Based on the information on the I2C bus itself and the remainder of -the Phillips docs the following algorithms appear to be correct. I am -fairly certain that the flowcharts in the phillips docs are wrong. */ - - -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/slab.h> -#include <linux/errno.h> -#include <linux/sched.h> -#include <linux/wait.h> -#include <linux/delay.h> -#include <asm/openprom.h> -#include <asm/oplib.h> -#include <asm/io.h> -#include <asm/system.h> -#include <asm/sbus.h> - -#if 0 -#define VFC_I2C_DEBUG -#endif - -#include "vfc.h" -#include "vfc_i2c.h" - -#define WRITE_S1(__val) \ - sbus_writel(__val, &dev->regs->i2c_s1) -#define WRITE_REG(__val) \ - sbus_writel(__val, &dev->regs->i2c_reg) - -#define VFC_I2C_READ (0x1) -#define VFC_I2C_WRITE (0x0) - -/****** - The i2c bus controller chip on the VFC is a pcd8584t, but - phillips claims it doesn't exist. As far as I can tell it is - identical to the PCF8584 so I treat it like it is the pcf8584. - - NOTE: The pcf8584 only cares - about the msb of the word you feed it -*****/ - -int vfc_pcf8584_init(struct vfc_dev *dev) -{ - /* This will also choose register S0_OWN so we can set it. */ - WRITE_S1(RESET); - - /* The pcf8584 shifts this value left one bit and uses - * it as its i2c bus address. - */ - WRITE_REG(0x55000000); - - /* This will set the i2c bus at the same speed sun uses, - * and set another magic bit. - */ - WRITE_S1(SELECT(S2)); - WRITE_REG(0x14000000); - - /* Enable the serial port, idle the i2c bus and set - * the data reg to s0. - */ - WRITE_S1(CLEAR_I2C_BUS); - udelay(100); - return 0; -} - -void vfc_i2c_delay_no_busy(struct vfc_dev *dev, unsigned long usecs) -{ - schedule_timeout_uninterruptible(usecs_to_jiffies(usecs)); -} - -void inline vfc_i2c_delay(struct vfc_dev *dev) -{ - vfc_i2c_delay_no_busy(dev, 100); -} - -int vfc_init_i2c_bus(struct vfc_dev *dev) -{ - WRITE_S1(ENABLE_SERIAL | SELECT(S0) | ACK); - vfc_i2c_reset_bus(dev); - return 0; -} - -int vfc_i2c_reset_bus(struct vfc_dev *dev) -{ - VFC_I2C_DEBUG_PRINTK((KERN_DEBUG "vfc%d: Resetting the i2c bus\n", - dev->instance)); - if(dev == NULL) - return -EINVAL; - if(dev->regs == NULL) - return -EINVAL; - WRITE_S1(SEND_I2C_STOP); - WRITE_S1(SEND_I2C_STOP | ACK); - vfc_i2c_delay(dev); - WRITE_S1(CLEAR_I2C_BUS); - VFC_I2C_DEBUG_PRINTK((KERN_DEBUG "vfc%d: I2C status %x\n", - dev->instance, - sbus_readl(&dev->regs->i2c_s1))); - return 0; -} - -static int vfc_i2c_wait_for_bus(struct vfc_dev *dev) -{ - int timeout = 1000; - - while(!(sbus_readl(&dev->regs->i2c_s1) & BB)) { - if(!(timeout--)) - return -ETIMEDOUT; - vfc_i2c_delay(dev); - } - return 0; -} - -static int vfc_i2c_wait_for_pin(struct vfc_dev *dev, int ack) -{ - int timeout = 1000; - int s1; - - while ((s1 = sbus_readl(&dev->regs->i2c_s1)) & PIN) { - if (!(timeout--)) - return -ETIMEDOUT; - vfc_i2c_delay(dev); - } - if (ack == VFC_I2C_ACK_CHECK) { - if(s1 & LRB) - return -EIO; - } - return 0; -} - -#define SHIFT(a) ((a) << 24) -static int vfc_i2c_xmit_addr(struct vfc_dev *dev, unsigned char addr, - char mode) -{ - int ret, raddr; -#if 1 - WRITE_S1(SEND_I2C_STOP | ACK); - WRITE_S1(SELECT(S0) | ENABLE_SERIAL); - vfc_i2c_delay(dev); -#endif - - switch(mode) { - case VFC_I2C_READ: - raddr = SHIFT(((unsigned int)addr | 0x1)); - WRITE_REG(raddr); - VFC_I2C_DEBUG_PRINTK(("vfc%d: receiving from i2c addr 0x%x\n", - dev->instance, addr | 0x1)); - break; - case VFC_I2C_WRITE: - raddr = SHIFT((unsigned int)addr & ~0x1); - WRITE_REG(raddr); - VFC_I2C_DEBUG_PRINTK(("vfc%d: sending to i2c addr 0x%x\n", - dev->instance, addr & ~0x1)); - break; - default: - return -EINVAL; - }; - - WRITE_S1(SEND_I2C_START); - vfc_i2c_delay(dev); - ret = vfc_i2c_wait_for_pin(dev,VFC_I2C_ACK_CHECK); /* We wait - for the - i2c send - to finish - here but - Sun - doesn't, - hmm */ - if (ret) { - printk(KERN_ERR "vfc%d: VFC xmit addr timed out or no ack\n", - dev->instance); - return ret; - } else if (mode == VFC_I2C_READ) { - if ((ret = sbus_readl(&dev->regs->i2c_reg) & 0xff000000) != raddr) { - printk(KERN_WARNING - "vfc%d: returned slave address " - "mismatch(%x,%x)\n", - dev->instance, raddr, ret); - } - } - return 0; -} - -static int vfc_i2c_xmit_byte(struct vfc_dev *dev,unsigned char *byte) -{ - int ret; - u32 val = SHIFT((unsigned int)*byte); - - WRITE_REG(val); - - ret = vfc_i2c_wait_for_pin(dev, VFC_I2C_ACK_CHECK); - switch(ret) { - case -ETIMEDOUT: - printk(KERN_ERR "vfc%d: VFC xmit byte timed out or no ack\n", - dev->instance); - break; - case -EIO: - ret = XMIT_LAST_BYTE; - break; - default: - break; - }; - - return ret; -} - -static int vfc_i2c_recv_byte(struct vfc_dev *dev, unsigned char *byte, - int last) -{ - int ret; - - if (last) { - WRITE_REG(NEGATIVE_ACK); - VFC_I2C_DEBUG_PRINTK(("vfc%d: sending negative ack\n", - dev->instance)); - } else { - WRITE_S1(ACK); - } - - ret = vfc_i2c_wait_for_pin(dev, VFC_I2C_NO_ACK_CHECK); - if(ret) { - printk(KERN_ERR "vfc%d: " - "VFC recv byte timed out\n", - dev->instance); - } - *byte = (sbus_readl(&dev->regs->i2c_reg)) >> 24; - return ret; -} - -int vfc_i2c_recvbuf(struct vfc_dev *dev, unsigned char addr, - char *buf, int count) -{ - int ret, last; - - if(!(count && buf && dev && dev->regs) ) - return -EINVAL; - - if ((ret = vfc_i2c_wait_for_bus(dev))) { - printk(KERN_ERR "vfc%d: VFC I2C bus busy\n", dev->instance); - return ret; - } - - if ((ret = vfc_i2c_xmit_addr(dev, addr, VFC_I2C_READ))) { - WRITE_S1(SEND_I2C_STOP); - vfc_i2c_delay(dev); - return ret; - } - - last = 0; - while (count--) { - if (!count) - last = 1; - if ((ret = vfc_i2c_recv_byte(dev, buf, last))) { - printk(KERN_ERR "vfc%d: " - "VFC error while receiving byte\n", - dev->instance); - WRITE_S1(SEND_I2C_STOP); - ret = -EINVAL; - } - buf++; - } - WRITE_S1(SEND_I2C_STOP | ACK); - vfc_i2c_delay(dev); - return ret; -} - -int vfc_i2c_sendbuf(struct vfc_dev *dev, unsigned char addr, - char *buf, int count) -{ - int ret; - - if (!(buf && dev && dev->regs)) - return -EINVAL; - - if ((ret = vfc_i2c_wait_for_bus(dev))) { - printk(KERN_ERR "vfc%d: VFC I2C bus busy\n", dev->instance); - return ret; - } - - if ((ret = vfc_i2c_xmit_addr(dev, addr, VFC_I2C_WRITE))) { - WRITE_S1(SEND_I2C_STOP); - vfc_i2c_delay(dev); - return ret; - } - - while(count--) { - ret = vfc_i2c_xmit_byte(dev, buf); - switch(ret) { - case XMIT_LAST_BYTE: - VFC_I2C_DEBUG_PRINTK(("vfc%d: " - "Receiver ended transmission with " - " %d bytes remaining\n", - dev->instance, count)); - ret = 0; - goto done; - break; - case 0: - break; - default: - printk(KERN_ERR "vfc%d: " - "VFC error while sending byte\n", dev->instance); - break; - }; - - buf++; - } -done: - WRITE_S1(SEND_I2C_STOP | ACK); - vfc_i2c_delay(dev); - return ret; -} - - - - - - - - - diff --git a/drivers/sbus/char/vfc_i2c.h b/drivers/sbus/char/vfc_i2c.h deleted file mode 100644 index a2e6973209d..00000000000 --- a/drivers/sbus/char/vfc_i2c.h +++ /dev/null @@ -1,44 +0,0 @@ -#ifndef _LINUX_VFC_I2C_H_ -#define _LINUX_VFC_I2C_H_ - -/* control bits */ -#define PIN (0x80000000) -#define ESO (0x40000000) -#define ES1 (0x20000000) -#define ES2 (0x10000000) -#define ENI (0x08000000) -#define STA (0x04000000) -#define STO (0x02000000) -#define ACK (0x01000000) - -/* status bits */ -#define STS (0x20000000) -#define BER (0x10000000) -#define LRB (0x08000000) -#define AAS (0x04000000) -#define LAB (0x02000000) -#define BB (0x01000000) - -#define SEND_I2C_START (PIN | ESO | STA) -#define SEND_I2C_STOP (PIN | ESO | STO) -#define CLEAR_I2C_BUS (PIN | ESO | ACK) -#define NEGATIVE_ACK ((ESO) & ~ACK) - -#define SELECT(a) (a) -#define S0 (PIN | ESO | ES1) -#define S0_OWN (PIN) -#define S2 (PIN | ES1) -#define S3 (PIN | ES2) - -#define ENABLE_SERIAL (PIN | ESO) -#define DISABLE_SERIAL (PIN) -#define RESET (PIN) - -#define XMIT_LAST_BYTE (1) -#define VFC_I2C_ACK_CHECK (1) -#define VFC_I2C_NO_ACK_CHECK (0) - -#endif /* _LINUX_VFC_I2C_H_ */ - - - |