diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/scsi/Kconfig | 4 | ||||
| -rw-r--r-- | drivers/scsi/sata_vsc.c | 51 |
2 files changed, 32 insertions, 23 deletions
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 5c94a5d4efc..4035920ce3d 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -595,10 +595,10 @@ config SCSI_SATA_VIA If unsure, say N. config SCSI_SATA_VITESSE - tristate "VITESSE VSC-7174 SATA support" + tristate "VITESSE VSC-7174 / INTEL 31244 SATA support" depends on SCSI_SATA && PCI help - This option enables support for Vitesse VSC7174 Serial ATA. + This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA. If unsure, say N. diff --git a/drivers/scsi/sata_vsc.c b/drivers/scsi/sata_vsc.c index b574379a7a8..b7b6c807346 100644 --- a/drivers/scsi/sata_vsc.c +++ b/drivers/scsi/sata_vsc.c @@ -82,17 +82,20 @@ #define VSC_SATA_PORT_OFFSET 0x200 /* Error interrupt status bit offsets */ -#define VSC_SATA_INT_ERROR_E_OFFSET 2 -#define VSC_SATA_INT_ERROR_P_OFFSET 4 -#define VSC_SATA_INT_ERROR_T_OFFSET 5 -#define VSC_SATA_INT_ERROR_M_OFFSET 1 +#define VSC_SATA_INT_ERROR_CRC 0x40 +#define VSC_SATA_INT_ERROR_T 0x20 +#define VSC_SATA_INT_ERROR_P 0x10 +#define VSC_SATA_INT_ERROR_R 0x8 +#define VSC_SATA_INT_ERROR_E 0x4 +#define VSC_SATA_INT_ERROR_M 0x2 +#define VSC_SATA_INT_PHY_CHANGE 0x1 +#define VSC_SATA_INT_ERROR (VSC_SATA_INT_ERROR_CRC | VSC_SATA_INT_ERROR_T | \ + VSC_SATA_INT_ERROR_P | VSC_SATA_INT_ERROR_R | \ + VSC_SATA_INT_ERROR_E | VSC_SATA_INT_ERROR_M | \ + VSC_SATA_INT_PHY_CHANGE) + #define is_vsc_sata_int_err(port_idx, int_status) \ - (int_status & ((1 << (VSC_SATA_INT_ERROR_E_OFFSET + (8 * port_idx))) | \ - (1 << (VSC_SATA_INT_ERROR_P_OFFSET + (8 * port_idx))) | \ - (1 << (VSC_SATA_INT_ERROR_T_OFFSET + (8 * port_idx))) | \ - (1 << (VSC_SATA_INT_ERROR_M_OFFSET + (8 * port_idx))) \ - )\ - ) + (int_status & (VSC_SATA_INT_ERROR << (8 * port_idx))) static u32 vsc_sata_scr_read (struct ata_port *ap, unsigned int sc_reg) @@ -215,14 +218,6 @@ static irqreturn_t vsc_sata_interrupt (int irq, void *dev_instance, ap = host_set->ports[i]; - if (is_vsc_sata_int_err(i, int_status)) { - u32 err_status; - printk(KERN_DEBUG "%s: ignoring interrupt(s)\n", __FUNCTION__); - err_status = ap ? vsc_sata_scr_read(ap, SCR_ERROR) : 0; - vsc_sata_scr_write(ap, SCR_ERROR, err_status); - handled++; - } - if (ap && !(ap->flags & (ATA_FLAG_PORT_DISABLED|ATA_FLAG_NOINTR))) { struct ata_queued_cmd *qc; @@ -230,12 +225,26 @@ static irqreturn_t vsc_sata_interrupt (int irq, void *dev_instance, qc = ata_qc_from_tag(ap, ap->active_tag); if (qc && (!(qc->tf.ctl & ATA_NIEN))) { handled += ata_host_intr(ap, qc); - } else { - printk(KERN_DEBUG "%s: ignoring interrupt(s)\n", __FUNCTION__); + } else if (is_vsc_sata_int_err(i, int_status)) { + /* + * On some chips (i.e. Intel 31244), an error + * interrupt will sneak in at initialization + * time (phy state changes). Clearing the SCR + * error register is not required, but it prevents + * the phy state change interrupts from recurring + * later. + */ + u32 err_status; + err_status = vsc_sata_scr_read(ap, SCR_ERROR); + printk(KERN_DEBUG "%s: clearing interrupt, " + "status %x; sata err status %x\n", + __FUNCTION__, + int_status, err_status); + vsc_sata_scr_write(ap, SCR_ERROR, err_status); + /* Clear interrupt status */ ata_chk_status(ap); handled++; } - } } } |