diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/net/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/net/cs89x0.c | 40 | ||||
| -rw-r--r-- | drivers/net/cs89x0.h | 2 |
3 files changed, 39 insertions, 5 deletions
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 47e158fa5aa..2b55687f6ee 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -1320,7 +1320,7 @@ config FORCEDETH config CS89x0 tristate "CS89x0 support" - depends on NET_PCI && (ISA || ARCH_IXDP2X01) + depends on (NET_PCI && (ISA || ARCH_IXDP2X01)) || ARCH_PNX0105 ---help--- Support for CS89x0 chipset based Ethernet cards. If you have a network (Ethernet) card of this type, say Y and read the diff --git a/drivers/net/cs89x0.c b/drivers/net/cs89x0.c index 25e4495de79..b96d6fb1929 100644 --- a/drivers/net/cs89x0.c +++ b/drivers/net/cs89x0.c @@ -174,6 +174,13 @@ static unsigned int cs8900_irq_map[] = {1,0,0,0}; #include <asm/irq.h> static unsigned int netcard_portlist[] __initdata = {IXDP2X01_CS8900_VIRT_BASE, 0}; static unsigned int cs8900_irq_map[] = {IRQ_IXDP2X01_CS8900, 0, 0, 0}; +#elif defined(CONFIG_ARCH_PNX0105) +#include <asm/irq.h> +#include <asm/arch/gpio.h> +#define CIRRUS_DEFAULT_BASE IO_ADDRESS(EXT_STATIC2_s0_BASE + 0x200000) /* = Physical address 0x48200000 */ +#define CIRRUS_DEFAULT_IRQ VH_INTC_INT_NUM_CASCADED_INTERRUPT_1 /* Event inputs bank 1 - ID 35/bit 3 */ +static unsigned int netcard_portlist[] __initdata = {CIRRUS_DEFAULT_BASE, 0}; +static unsigned int cs8900_irq_map[] = {CIRRUS_DEFAULT_IRQ, 0, 0, 0}; #else static unsigned int netcard_portlist[] __initdata = { 0x300, 0x320, 0x340, 0x360, 0x200, 0x220, 0x240, 0x260, 0x280, 0x2a0, 0x2c0, 0x2e0, 0}; @@ -431,6 +438,30 @@ cs89x0_probe1(struct net_device *dev, int ioaddr, int modular) #endif } +#ifdef CONFIG_ARCH_PNX0105 + initialize_ebi(); + + /* Map GPIO registers for the pins connected to the CS8900a. */ + if (map_cirrus_gpio() < 0) + return -ENODEV; + + reset_cirrus(); + + /* Map event-router registers. */ + if (map_event_router() < 0) + return -ENODEV; + + enable_cirrus_irq(); + + unmap_cirrus_gpio(); + unmap_event_router(); + + dev->base_addr = ioaddr; + + for (i = 0 ; i < 3 ; i++) + readreg(dev, 0); +#endif + /* Grab the region so we can find another board if autoIRQ fails. */ /* WTF is going on here? */ if (!request_region(ioaddr & ~3, NETCARD_IO_EXTENT, DRV_NAME)) { @@ -672,7 +703,7 @@ printk("PP_addr=0x%x\n", inw(ioaddr + ADD_PORT)); } else { i = lp->isa_config & INT_NO_MASK; if (lp->chip_type == CS8900) { -#ifdef CONFIG_ARCH_IXDP2X01 +#if defined(CONFIG_ARCH_IXDP2X01) || defined(CONFIG_ARCH_PNX0105) i = cs8900_irq_map[0]; #else /* Translate the IRQ using the IRQ mapping table. */ @@ -1145,7 +1176,7 @@ net_open(struct net_device *dev) int i; int ret; -#ifndef CONFIG_SH_HICOSH4 /* uses irq#1, so this won't work */ +#if !defined(CONFIG_SH_HICOSH4) && !defined(CONFIG_ARCH_PNX0105) /* uses irq#1, so this won't work */ if (dev->irq < 2) { /* Allow interrupts to be generated by the chip */ /* Cirrus' release had this: */ @@ -1176,7 +1207,7 @@ net_open(struct net_device *dev) else #endif { -#ifndef CONFIG_ARCH_IXDP2X01 +#if !defined(CONFIG_ARCH_IXDP2X01) && !defined(CONFIG_ARCH_PNX0105) if (((1 << dev->irq) & lp->irq_map) == 0) { printk(KERN_ERR "%s: IRQ %d is not in our map of allowable IRQs, which is %x\n", dev->name, dev->irq, lp->irq_map); @@ -1261,6 +1292,9 @@ net_open(struct net_device *dev) case A_CNF_MEDIA_10B_2: result = lp->adapter_cnf & A_CNF_10B_2; break; default: result = lp->adapter_cnf & (A_CNF_10B_T | A_CNF_AUI | A_CNF_10B_2); } +#ifdef CONFIG_ARCH_PNX0105 + result = A_CNF_10B_T; +#endif if (!result) { printk(KERN_ERR "%s: EEPROM is configured for unavailable media\n", dev->name); release_irq: diff --git a/drivers/net/cs89x0.h b/drivers/net/cs89x0.h index b0ef7ad2baa..bd3ad8e6cce 100644 --- a/drivers/net/cs89x0.h +++ b/drivers/net/cs89x0.h @@ -16,7 +16,7 @@ #include <linux/config.h> -#ifdef CONFIG_ARCH_IXDP2X01 +#if defined(CONFIG_ARCH_IXDP2X01) || defined(CONFIG_ARCH_PNX0105) /* IXDP2401/IXDP2801 uses dword-aligned register addressing */ #define CS89x0_PORT(reg) ((reg) * 2) #else |