diff options
Diffstat (limited to 'drivers')
51 files changed, 228 insertions, 142 deletions
diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c index 7edf6d913c1..765fd1c56cd 100644 --- a/drivers/acpi/bus.c +++ b/drivers/acpi/bus.c @@ -688,14 +688,6 @@ void __init acpi_early_init(void) if (acpi_disabled) return; - /* - * ACPI CA initializes acpi_dbg_level to non-zero, which means - * we get debug output merely by turning on CONFIG_ACPI_DEBUG. - * Turn it off so we don't get output unless the user specifies - * acpi.debug_level. - */ - acpi_dbg_level = 0; - printk(KERN_INFO PREFIX "Core revision %08x\n", ACPI_CA_VERSION); /* enable workarounds, unless strict ACPI spec. compliance */ diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index 5f8d746a9b8..38aca048e95 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -374,15 +374,15 @@ static int tsc_halts_in_c(int state) { switch (boot_cpu_data.x86_vendor) { case X86_VENDOR_AMD: + case X86_VENDOR_INTEL: /* * AMD Fam10h TSC will tick in all * C/P/S0/S1 states when this bit is set. */ - if (boot_cpu_has(X86_FEATURE_CONSTANT_TSC)) + if (boot_cpu_has(X86_FEATURE_NONSTOP_TSC)) return 0; + /*FALL THROUGH*/ - case X86_VENDOR_INTEL: - /* Several cases known where TSC halts in C2 too */ default: return state > ACPI_STATE_C1; } diff --git a/drivers/acpi/utilities/utglobal.c b/drivers/acpi/utilities/utglobal.c index 670551b95e5..17ed5ac840f 100644 --- a/drivers/acpi/utilities/utglobal.c +++ b/drivers/acpi/utilities/utglobal.c @@ -64,7 +64,7 @@ u32 acpi_dbg_level = ACPI_DEBUG_DEFAULT; /* Debug switch - layer (component) mask */ -u32 acpi_dbg_layer = ACPI_COMPONENT_DEFAULT | ACPI_ALL_DRIVERS; +u32 acpi_dbg_layer = 0; u32 acpi_gbl_nesting_level = 0; /* Debugger globals */ diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index 9364dc55425..9f7c543cc04 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -1693,6 +1693,11 @@ static int rebuild_lun_table(ctlr_info_t *h, int first_time) for (i = 0; i <= h->highest_lun; i++) { int j; drv_found = 0; + + /* skip holes in the array from already deleted drives */ + if (h->drv[i].raid_level == -1) + continue; + for (j = 0; j < num_luns; j++) { memcpy(&lunid, &ld_buff->LUN[j][0], 4); lunid = le32_to_cpu(lunid); diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c index 5317e08221e..65799651737 100644 --- a/drivers/dma/dmaengine.c +++ b/drivers/dma/dmaengine.c @@ -388,7 +388,10 @@ int dma_async_device_register(struct dma_device *device) init_completion(&device->done); kref_init(&device->refcount); + + mutex_lock(&dma_list_mutex); device->dev_id = id++; + mutex_unlock(&dma_list_mutex); /* represent channels in sysfs. Probably want devs too */ list_for_each_entry(chan, &device->channels, device_node) { diff --git a/drivers/dma/ioat_dma.c b/drivers/dma/ioat_dma.c index ecd743f7cc6..6607fdd00b1 100644 --- a/drivers/dma/ioat_dma.c +++ b/drivers/dma/ioat_dma.c @@ -1341,10 +1341,12 @@ static void ioat_dma_start_null_desc(struct ioat_dma_chan *ioat_chan) */ #define IOAT_TEST_SIZE 2000 +DECLARE_COMPLETION(test_completion); static void ioat_dma_test_callback(void *dma_async_param) { printk(KERN_ERR "ioatdma: ioat_dma_test_callback(%p)\n", dma_async_param); + complete(&test_completion); } /** @@ -1410,7 +1412,8 @@ static int ioat_dma_self_test(struct ioatdma_device *device) goto free_resources; } device->common.device_issue_pending(dma_chan); - msleep(1); + + wait_for_completion_timeout(&test_completion, msecs_to_jiffies(3000)); if (device->common.device_is_tx_complete(dma_chan, cookie, NULL, NULL) != DMA_SUCCESS) { diff --git a/drivers/dma/iop-adma.c b/drivers/dma/iop-adma.c index c7a9306d951..6be31726220 100644 --- a/drivers/dma/iop-adma.c +++ b/drivers/dma/iop-adma.c @@ -85,18 +85,28 @@ iop_adma_run_tx_complete_actions(struct iop_adma_desc_slot *desc, enum dma_ctrl_flags flags = desc->async_tx.flags; u32 src_cnt; dma_addr_t addr; + dma_addr_t dest; + src_cnt = unmap->unmap_src_cnt; + dest = iop_desc_get_dest_addr(unmap, iop_chan); if (!(flags & DMA_COMPL_SKIP_DEST_UNMAP)) { - addr = iop_desc_get_dest_addr(unmap, iop_chan); - dma_unmap_page(dev, addr, len, DMA_FROM_DEVICE); + enum dma_data_direction dir; + + if (src_cnt > 1) /* is xor? */ + dir = DMA_BIDIRECTIONAL; + else + dir = DMA_FROM_DEVICE; + + dma_unmap_page(dev, dest, len, dir); } if (!(flags & DMA_COMPL_SKIP_SRC_UNMAP)) { - src_cnt = unmap->unmap_src_cnt; while (src_cnt--) { addr = iop_desc_get_src_addr(unmap, iop_chan, src_cnt); + if (addr == dest) + continue; dma_unmap_page(dev, addr, len, DMA_TO_DEVICE); } diff --git a/drivers/dma/mv_xor.c b/drivers/dma/mv_xor.c index 0328da020a1..bcda1742641 100644 --- a/drivers/dma/mv_xor.c +++ b/drivers/dma/mv_xor.c @@ -311,17 +311,26 @@ mv_xor_run_tx_complete_actions(struct mv_xor_desc_slot *desc, enum dma_ctrl_flags flags = desc->async_tx.flags; u32 src_cnt; dma_addr_t addr; + dma_addr_t dest; + src_cnt = unmap->unmap_src_cnt; + dest = mv_desc_get_dest_addr(unmap); if (!(flags & DMA_COMPL_SKIP_DEST_UNMAP)) { - addr = mv_desc_get_dest_addr(unmap); - dma_unmap_page(dev, addr, len, DMA_FROM_DEVICE); + enum dma_data_direction dir; + + if (src_cnt > 1) /* is xor ? */ + dir = DMA_BIDIRECTIONAL; + else + dir = DMA_FROM_DEVICE; + dma_unmap_page(dev, dest, len, dir); } if (!(flags & DMA_COMPL_SKIP_SRC_UNMAP)) { - src_cnt = unmap->unmap_src_cnt; while (src_cnt--) { addr = mv_desc_get_src_addr(unmap, src_cnt); + if (addr == dest) + continue; dma_unmap_page(dev, addr, len, DMA_TO_DEVICE); } diff --git a/drivers/edac/edac_device.c b/drivers/edac/edac_device.c index 5fcd3d89c75..4041e914328 100644 --- a/drivers/edac/edac_device.c +++ b/drivers/edac/edac_device.c @@ -394,6 +394,12 @@ static void edac_device_workq_function(struct work_struct *work_req) mutex_lock(&device_ctls_mutex); + /* If we are being removed, bail out immediately */ + if (edac_dev->op_state == OP_OFFLINE) { + mutex_unlock(&device_ctls_mutex); + return; + } + /* Only poll controllers that are running polled and have a check */ if ((edac_dev->op_state == OP_RUNNING_POLL) && (edac_dev->edac_check != NULL)) { @@ -585,14 +591,14 @@ struct edac_device_ctl_info *edac_device_del_device(struct device *dev) /* mark this instance as OFFLINE */ edac_dev->op_state = OP_OFFLINE; - /* clear workq processing on this instance */ - edac_device_workq_teardown(edac_dev); - /* deregister from global list */ del_edac_device_from_global_list(edac_dev); mutex_unlock(&device_ctls_mutex); + /* clear workq processing on this instance */ + edac_device_workq_teardown(edac_dev); + /* Tear down the sysfs entries for this instance */ edac_device_remove_sysfs(edac_dev); diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index 553dd4bc307..afa8a12cd00 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -717,7 +717,7 @@ static int i915_getparam(struct drm_device *dev, void *data, value = dev->pci_device; break; case I915_PARAM_HAS_GEM: - value = 1; + value = dev_priv->has_gem; break; default: DRM_ERROR("Unknown parameter %d\n", param->param); @@ -830,6 +830,14 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags) dev_priv->regs = ioremap(base, size); +#ifdef CONFIG_HIGHMEM64G + /* don't enable GEM on PAE - needs agp + set_memory_* interface fixes */ + dev_priv->has_gem = 0; +#else + /* enable GEM by default */ + dev_priv->has_gem = 1; +#endif + i915_gem_load(dev); /* Init HWS */ diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index adc972cc6bf..b3cc4731aa7 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -106,6 +106,8 @@ struct intel_opregion { typedef struct drm_i915_private { struct drm_device *dev; + int has_gem; + void __iomem *regs; drm_local_map_t *sarea; diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index ad672d85482..24fe8c10b4b 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -2309,7 +2309,14 @@ i915_gem_busy_ioctl(struct drm_device *dev, void *data, } obj_priv = obj->driver_private; - args->busy = obj_priv->active; + /* Don't count being on the flushing list against the object being + * done. Otherwise, a buffer left on the flushing list but not getting + * flushed (because nobody's flushing that domain) won't ever return + * unbusy and get reused by libdrm's bo cache. The other expected + * consumer of this interface, OpenGL's occlusion queries, also specs + * that the objects get unbusy "eventually" without any interference. + */ + args->busy = obj_priv->active && obj_priv->last_rendering_seqno != 0; drm_gem_object_unreference(obj); mutex_unlock(&dev->struct_mutex); diff --git a/drivers/gpu/drm/radeon/radeon_irq.c b/drivers/gpu/drm/radeon/radeon_irq.c index 99be11418ac..8289e16419a 100644 --- a/drivers/gpu/drm/radeon/radeon_irq.c +++ b/drivers/gpu/drm/radeon/radeon_irq.c @@ -44,7 +44,7 @@ void radeon_irq_set_state(struct drm_device *dev, u32 mask, int state) else dev_priv->irq_enable_reg &= ~mask; - if (!dev->irq_enabled) + if (dev->irq_enabled) RADEON_WRITE(RADEON_GEN_INT_CNTL, dev_priv->irq_enable_reg); } @@ -57,7 +57,7 @@ static void r500_vbl_irq_set_state(struct drm_device *dev, u32 mask, int state) else dev_priv->r500_disp_irq_reg &= ~mask; - if (!dev->irq_enabled) + if (dev->irq_enabled) RADEON_WRITE(R500_DxMODE_INT_MASK, dev_priv->r500_disp_irq_reg); } diff --git a/drivers/ide/cs5530.c b/drivers/ide/cs5530.c index 53f079cc00a..d8ede85fe17 100644 --- a/drivers/ide/cs5530.c +++ b/drivers/ide/cs5530.c @@ -81,11 +81,12 @@ static u8 cs5530_udma_filter(ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; ide_drive_t *mate = ide_get_pair_dev(drive); - u16 *mateid = mate->id; + u16 *mateid; u8 mask = hwif->ultra_mask; if (mate == NULL) goto out; + mateid = mate->id; if (ata_id_has_dma(mateid) && __ide_dma_bad_drive(mate) == 0) { if ((mateid[ATA_ID_FIELD_VALID] & 4) && diff --git a/drivers/ide/sc1200.c b/drivers/ide/sc1200.c index f1a8758e3a9..ec7f766ef5e 100644 --- a/drivers/ide/sc1200.c +++ b/drivers/ide/sc1200.c @@ -104,11 +104,12 @@ static u8 sc1200_udma_filter(ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; ide_drive_t *mate = ide_get_pair_dev(drive); - u16 *mateid = mate->id; + u16 *mateid; u8 mask = hwif->ultra_mask; if (mate == NULL) goto out; + mateid = mate->id; if (ata_id_has_dma(mateid) && __ide_dma_bad_drive(mate) == 0) { if ((mateid[ATA_ID_FIELD_VALID] & 4) && diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c index ac89a5deaca..ab7c8e4a61f 100644 --- a/drivers/md/bitmap.c +++ b/drivers/md/bitmap.c @@ -208,16 +208,19 @@ static void bitmap_checkfree(struct bitmap *bitmap, unsigned long page) */ /* IO operations when bitmap is stored near all superblocks */ -static struct page *read_sb_page(mddev_t *mddev, long offset, unsigned long index) +static struct page *read_sb_page(mddev_t *mddev, long offset, + struct page *page, + unsigned long index, int size) { /* choose a good rdev and read the page from there */ mdk_rdev_t *rdev; struct list_head *tmp; - struct page *page = alloc_page(GFP_KERNEL); sector_t target; if (!page) + page = alloc_page(GFP_KERNEL); + if (!page) return ERR_PTR(-ENOMEM); rdev_for_each(rdev, tmp, mddev) { @@ -227,7 +230,9 @@ static struct page *read_sb_page(mddev_t *mddev, long offset, unsigned long inde target = rdev->sb_start + offset + index * (PAGE_SIZE/512); - if (sync_page_io(rdev->bdev, target, PAGE_SIZE, page, READ)) { + if (sync_page_io(rdev->bdev, target, + roundup(size, bdev_hardsect_size(rdev->bdev)), + page, READ)) { page->index = index; attach_page_buffers(page, NULL); /* so that free_buffer will * quietly no-op */ @@ -544,7 +549,9 @@ static int bitmap_read_sb(struct bitmap *bitmap) bitmap->sb_page = read_page(bitmap->file, 0, bitmap, bytes); } else { - bitmap->sb_page = read_sb_page(bitmap->mddev, bitmap->offset, 0); + bitmap->sb_page = read_sb_page(bitmap->mddev, bitmap->offset, + NULL, + 0, sizeof(bitmap_super_t)); } if (IS_ERR(bitmap->sb_page)) { err = PTR_ERR(bitmap->sb_page); @@ -957,11 +964,16 @@ static int bitmap_init_from_disk(struct bitmap *bitmap, sector_t start) */ page = bitmap->sb_page; offset = sizeof(bitmap_super_t); + read_sb_page(bitmap->mddev, bitmap->offset, + page, + index, count); } else if (file) { page = read_page(file, index, bitmap, count); offset = 0; } else { - page = read_sb_page(bitmap->mddev, bitmap->offset, index); + page = read_sb_page(bitmap->mddev, bitmap->offset, + NULL, + index, count); offset = 0; } if (IS_ERR(page)) { /* read error */ diff --git a/drivers/media/dvb/b2c2/Kconfig b/drivers/media/dvb/b2c2/Kconfig index 73dc2ee9b01..b34301d56cd 100644 --- a/drivers/media/dvb/b2c2/Kconfig +++ b/drivers/media/dvb/b2c2/Kconfig @@ -9,11 +9,11 @@ config DVB_B2C2_FLEXCOP select DVB_STV0297 if !DVB_FE_CUSTOMISE select DVB_BCM3510 if !DVB_FE_CUSTOMISE select DVB_LGDT330X if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE select DVB_S5H1420 if !DVB_FE_CUSTOMISE select DVB_TUNER_ITD1000 if !DVB_FE_CUSTOMISE select DVB_ISL6421 if !DVB_FE_CUSTOMISE select DVB_CX24123 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMIZE help Support for the digital TV receiver chip made by B2C2 Inc. included in Technisats PCI cards and USB boxes. diff --git a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c index a127a4175c4..5cded370854 100644 --- a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c +++ b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c @@ -628,12 +628,14 @@ int flexcop_frontend_init(struct flexcop_device *fc) } /* try the cable dvb (stv0297) */ + fc->fc_i2c_adap[0].no_base_addr = 1; fc->fe = dvb_attach(stv0297_attach, &alps_tdee4_stv0297_config, i2c); if (fc->fe != NULL) { fc->dev_type = FC_CABLE; fc->fe->ops.tuner_ops.set_params = alps_tdee4_stv0297_tuner_set_params; goto fe_found; } + fc->fc_i2c_adap[0].no_base_addr = 0; /* try the sky v2.3 (vp310/Samsung tbdu18132(tsa5059)) */ fc->fe = dvb_attach(mt312_attach, diff --git a/drivers/media/dvb/b2c2/flexcop-i2c.c b/drivers/media/dvb/b2c2/flexcop-i2c.c index 43a112ec6d4..f13783f08f0 100644 --- a/drivers/media/dvb/b2c2/flexcop-i2c.c +++ b/drivers/media/dvb/b2c2/flexcop-i2c.c @@ -47,9 +47,13 @@ static int flexcop_i2c_read4(struct flexcop_i2c_adapter *i2c, int len = r100.tw_sm_c_100.total_bytes, /* remember total_bytes is buflen-1 */ ret; - r100.tw_sm_c_100.no_base_addr_ack_error = i2c->no_base_addr; ret = flexcop_i2c_operation(i2c->fc, &r100); if (ret != 0) { + deb_i2c("Retrying operation\n"); + r100.tw_sm_c_100.no_base_addr_ack_error = i2c->no_base_addr; + ret = flexcop_i2c_operation(i2c->fc, &r100); + } + if (ret != 0) { deb_i2c("read failed. %d\n", ret); return ret; } diff --git a/drivers/media/dvb/bt8xx/Kconfig b/drivers/media/dvb/bt8xx/Kconfig index 7e9c090fc04..27edb0ece58 100644 --- a/drivers/media/dvb/bt8xx/Kconfig +++ b/drivers/media/dvb/bt8xx/Kconfig @@ -8,7 +8,7 @@ config DVB_BT8XX select DVB_OR51211 if !DVB_FE_CUSTOMISE select DVB_LGDT330X if !DVB_FE_CUSTOMISE select DVB_ZL10353 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMIZE help Support for PCI cards based on the Bt8xx PCI bridge. Examples are the Nebula cards, the Pinnacle PCTV cards, the Twinhan DST cards, diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig index 62b68c291d9..49f7b20c25d 100644 --- a/drivers/media/dvb/dvb-usb/Kconfig +++ b/drivers/media/dvb/dvb-usb/Kconfig @@ -24,8 +24,8 @@ config DVB_USB_A800 tristate "AVerMedia AverTV DVB-T USB 2.0 (A800)" depends on DVB_USB select DVB_DIB3000MC - select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE select DVB_PLL if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMIZE help Say Y here to support the AVerMedia AverTV DVB-T USB 2.0 (A800) receiver. @@ -34,7 +34,7 @@ config DVB_USB_DIBUSB_MB depends on DVB_USB select DVB_PLL if !DVB_FE_CUSTOMISE select DVB_DIB3000MB - select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMIZE help Support for USB 1.1 and 2.0 DVB-T receivers based on reference designs made by DiBcom (<http://www.dibcom.fr>) equipped with a DiB3000M-B demodulator. @@ -55,7 +55,7 @@ config DVB_USB_DIBUSB_MC tristate "DiBcom USB DVB-T devices (based on the DiB3000M-C/P) (see help for device list)" depends on DVB_USB select DVB_DIB3000MC - select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMIZE help Support for USB2.0 DVB-T receivers based on reference designs made by DiBcom (<http://www.dibcom.fr>) equipped with a DiB3000M-C/P demodulator. @@ -73,11 +73,11 @@ config DVB_USB_DIB0700 select DVB_DIB7000M select DVB_DIB3000MC select DVB_S5H1411 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_MT2266 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_XC2028 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_XC5000 if !DVB_FE_CUSTOMIZE select DVB_TUNER_DIB0070 + select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMIZE + select MEDIA_TUNER_MT2266 if !MEDIA_TUNER_CUSTOMIZE + select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMIZE + select MEDIA_TUNER_XC5000 if !MEDIA_TUNER_CUSTOMIZE help Support for USB2.0/1.1 DVB receivers based on the DiB0700 USB bridge. The USB bridge is also present in devices having the DiB7700 DVB-T-USB @@ -95,7 +95,7 @@ config DVB_USB_UMT_010 depends on DVB_USB select DVB_PLL if !DVB_FE_CUSTOMISE select DVB_DIB3000MC - select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMIZE help Say Y here to support the HanfTek UMT-010 USB2.0 stick-sized DVB-T receiver. @@ -107,11 +107,11 @@ config DVB_USB_CXUSB select DVB_LGDT330X if !DVB_FE_CUSTOMISE select DVB_MT352 if !DVB_FE_CUSTOMISE select DVB_ZL10353 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_XC2028 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_MXL5005S if !DVB_FE_CUSTOMISE select DVB_DIB7000P if !DVB_FE_CUSTOMISE select DVB_TUNER_DIB0070 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMIZE + select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMIZE + select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMIZE help Say Y here to support the Conexant USB2.0 hybrid reference design. Currently, only DVB and ATSC modes are supported, analog mode @@ -124,9 +124,9 @@ config DVB_USB_M920X tristate "Uli m920x DVB-T USB2.0 support" depends on DVB_USB select DVB_MT352 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_TDA827X if !DVB_FE_CUSTOMISE select DVB_TDA1004X if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMIZE + select MEDIA_TUNER_TDA827X if !MEDIA_TUNER_CUSTOMIZE help Say Y here to support the MSI Mega Sky 580 USB2.0 DVB-T receiver. Currently, only devices with a product id of @@ -137,7 +137,7 @@ config DVB_USB_GL861 tristate "Genesys Logic GL861 USB2.0 support" depends on DVB_USB select DVB_ZL10353 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMIZE help Say Y here to support the MSI Megasky 580 (55801) DVB-T USB2.0 receiver with USB ID 0db0:5581. @@ -146,7 +146,7 @@ config DVB_USB_AU6610 tristate "Alcor Micro AU6610 USB2.0 support" depends on DVB_USB select DVB_ZL10353 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMIZE help Say Y here to support the Sigmatek DVB-110 DVB-T USB2.0 receiver. @@ -198,8 +198,8 @@ config DVB_USB_NOVA_T_USB2 tristate "Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0 support" depends on DVB_USB select DVB_DIB3000MC - select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE select DVB_PLL if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMIZE help Say Y here to support the Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0 receiver. @@ -235,8 +235,8 @@ config DVB_USB_OPERA1 config DVB_USB_AF9005 tristate "Afatech AF9005 DVB-T USB1.1 support" depends on DVB_USB && EXPERIMENTAL - select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMIZE + select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMIZE help Say Y here to support the Afatech AF9005 based DVB-T USB1.1 receiver and the TerraTec Cinergy T USB XE (Rev.1) @@ -284,7 +284,7 @@ config DVB_USB_DTV5100 tristate "AME DTV-5100 USB2.0 DVB-T support" depends on DVB_USB select DVB_ZL10353 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMIZE help Say Y here to support the AME DTV-5100 USB2.0 DVB-T receiver. @@ -293,9 +293,9 @@ config DVB_USB_AF9015 depends on DVB_USB && EXPERIMENTAL select DVB_AF9013 select DVB_PLL if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_TDA18271 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_MXL5005S if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMIZE + select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMIZE + select MEDIA_TUNER_TDA18271 if !MEDIA_TUNER_CUSTOMIZE + select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMIZE help Say Y here to support the Afatech AF9015 based DVB-T USB2.0 receiver diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c index f28d3ae59e0..39173278891 100644 --- a/drivers/media/dvb/dvb-usb/dib0700_devices.c +++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c @@ -446,13 +446,13 @@ static int stk7700ph_tuner_attach(struct dvb_usb_adapter *adap) == NULL ? -ENODEV : 0; } -#define DEFAULT_RC_INTERVAL 150 +#define DEFAULT_RC_INTERVAL 50 static u8 rc_request[] = { REQUEST_POLL_RC, 0 }; /* Number of keypresses to ignore before start repeating */ -#define RC_REPEAT_DELAY 2 -#define RC_REPEAT_DELAY_V1_20 5 +#define RC_REPEAT_DELAY 6 +#define RC_REPEAT_DELAY_V1_20 10 diff --git a/drivers/media/dvb/ttpci/Kconfig b/drivers/media/dvb/ttpci/Kconfig index 867027ceab3..401a04effc0 100644 --- a/drivers/media/dvb/ttpci/Kconfig +++ b/drivers/media/dvb/ttpci/Kconfig @@ -106,7 +106,7 @@ config DVB_BUDGET_CI select DVB_TDA1004X if !DVB_FE_CUSTOMISE select DVB_LNBP21 if !DVB_FE_CUSTOMISE select DVB_TDA10023 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_TDA827X if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_TDA827X if !MEDIA_TUNER_CUSTOMIZE select VIDEO_IR help Support for simple SAA7146 based DVB cards diff --git a/drivers/media/video/compat_ioctl32.c b/drivers/media/video/compat_ioctl32.c index e6ca4012b5f..0ea85a05e5c 100644 --- a/drivers/media/video/compat_ioctl32.c +++ b/drivers/media/video/compat_ioctl32.c @@ -831,7 +831,7 @@ long v4l_compat_ioctl32(struct file *file, unsigned int cmd, unsigned long arg) { int ret = -ENOIOCTLCMD; - if (!file->f_op->ioctl) + if (!file->f_op->ioctl && !file->f_op->unlocked_ioctl) return ret; switch (cmd) { diff --git a/drivers/media/video/cx18/Kconfig b/drivers/media/video/cx18/Kconfig index ef48565de7f..8940b5387de 100644 --- a/drivers/media/video/cx18/Kconfig +++ b/drivers/media/video/cx18/Kconfig @@ -9,7 +9,7 @@ config VIDEO_CX18 select VIDEO_CX2341X select VIDEO_CS5345 select DVB_S5H1409 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_MXL5005S if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMIZE ---help--- This is a video4linux driver for Conexant cx23418 based PCI combo video recorder devices. diff --git a/drivers/media/video/cx23885/Kconfig b/drivers/media/video/cx23885/Kconfig index 8c1b7fa47a4..00f1e2e8889 100644 --- a/drivers/media/video/cx23885/Kconfig +++ b/drivers/media/video/cx23885/Kconfig @@ -11,16 +11,16 @@ config VIDEO_CX23885 select VIDEO_CX25840 select VIDEO_CX2341X select DVB_DIB7000P if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_MT2131 if !DVB_FE_CUSTOMISE select DVB_S5H1409 if !DVB_FE_CUSTOMISE select DVB_S5H1411 if !DVB_FE_CUSTOMISE select DVB_LGDT330X if !DVB_FE_CUSTOMISE select DVB_ZL10353 if !DVB_FE_CUSTOMISE + select DVB_TDA10048 if !DVB_FE_CUSTOMIZE + select MEDIA_TUNER_MT2131 if !MEDIA_TUNER_CUSTOMIZE select MEDIA_TUNER_XC2028 if !DVB_FE_CUSTOMIZE select MEDIA_TUNER_TDA8290 if !DVB_FE_CUSTOMIZE select MEDIA_TUNER_TDA18271 if !DVB_FE_CUSTOMIZE select MEDIA_TUNER_XC5000 if !DVB_FE_CUSTOMIZE - select DVB_TDA10048 if !DVB_FE_CUSTOMIZE ---help--- This is a video4linux driver for Conexant 23885 based TV cards. diff --git a/drivers/media/video/cx88/Kconfig b/drivers/media/video/cx88/Kconfig index 0b9e5fac623..b0f837588e0 100644 --- a/drivers/media/video/cx88/Kconfig +++ b/drivers/media/video/cx88/Kconfig @@ -56,12 +56,12 @@ config VIDEO_CX88_DVB select DVB_NXT200X if !DVB_FE_CUSTOMISE select DVB_CX24123 if !DVB_FE_CUSTOMISE select DVB_ISL6421 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE select DVB_S5H1411 if !DVB_FE_CUSTOMISE select DVB_CX24116 if !DVB_FE_CUSTOMISE select DVB_STV0299 if !DVB_FE_CUSTOMISE select DVB_STV0288 if !DVB_FE_CUSTOMISE select DVB_STB6000 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMIZE ---help--- This adds support for DVB/ATSC cards based on the Conexant 2388x chip. diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c index 610f535a257..4ea1f1e0489 100644 --- a/drivers/media/video/em28xx/em28xx-video.c +++ b/drivers/media/video/em28xx/em28xx-video.c @@ -549,10 +549,11 @@ static int em28xx_config(struct em28xx *dev) static void em28xx_config_i2c(struct em28xx *dev) { struct v4l2_routing route; + int zero = 0; route.input = INPUT(dev->ctl_input)->vmux; route.output = 0; - em28xx_i2c_call_clients(dev, VIDIOC_INT_RESET, NULL); + em28xx_i2c_call_clients(dev, VIDIOC_INT_RESET, &zero); em28xx_i2c_call_clients(dev, VIDIOC_INT_S_VIDEO_ROUTING, &route); em28xx_i2c_call_clients(dev, VIDIOC_STREAMON, NULL); } diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c index 748a87e82e4..02a6e9ef033 100644 --- a/drivers/media/video/gspca/gspca.c +++ b/drivers/media/video/gspca/gspca.c @@ -1264,10 +1264,10 @@ static int vidioc_s_jpegcomp(struct file *file, void *priv, struct gspca_dev *gspca_dev = priv; int ret; - if (mutex_lock_interruptible(&gspca_dev->usb_lock)) - return -ERESTARTSYS; if (!gspca_dev->sd_desc->set_jcomp) return -EINVAL; + if (mutex_lock_interruptible(&gspca_dev->usb_lock)) + return -ERESTARTSYS; ret = gspca_dev->sd_desc->set_jcomp(gspca_dev, jpegcomp); mutex_unlock(&gspca_dev->usb_lock); return ret; diff --git a/drivers/media/video/pvrusb2/Kconfig b/drivers/media/video/pvrusb2/Kconfig index 19eb274c9cd..854c2a88535 100644 --- a/drivers/media/video/pvrusb2/Kconfig +++ b/drivers/media/video/pvrusb2/Kconfig @@ -42,7 +42,7 @@ config VIDEO_PVRUSB2_DVB select DVB_S5H1411 if !DVB_FE_CUSTOMISE select DVB_TDA10048 if !DVB_FE_CUSTOMIZE select MEDIA_TUNER_TDA18271 if !DVB_FE_CUSTOMIZE - select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMIZE select MEDIA_TUNER_TDA8290 if !DVB_FE_CUSTOMIZE ---help--- diff --git a/drivers/media/video/saa7134/Kconfig b/drivers/media/video/saa7134/Kconfig index 7021bbf5897..fc2164e28e7 100644 --- a/drivers/media/video/saa7134/Kconfig +++ b/drivers/media/video/saa7134/Kconfig @@ -34,9 +34,9 @@ config VIDEO_SAA7134_DVB select DVB_NXT200X if !DVB_FE_CUSTOMISE select DVB_TDA10086 if !DVB_FE_CUSTOMISE select DVB_TDA826X if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_TDA827X if !DVB_FE_CUSTOMISE select DVB_ISL6421 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_TDA827X if !MEDIA_TUNER_CUSTOMIZE + select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMIZE ---help--- This adds support for DVB cards based on the Philips saa7134 chip. diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c index d62fd4f6b52..ee090413e59 100644 --- a/drivers/message/fusion/mptscsih.c +++ b/drivers/message/fusion/mptscsih.c @@ -2008,6 +2008,9 @@ mptscsih_host_reset(struct scsi_cmnd *SCpnt) return FAILED; } + /* make sure we have no outstanding commands at this stage */ + mptscsih_flush_running_cmds(hd); + ioc = hd->ioc; printk(MYIOC_s_INFO_FMT "attempting host reset! (sc=%p)\n", ioc->name, SCpnt); diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c index a1a3d0e5d2b..9e8222f9e90 100644 --- a/drivers/net/bnx2.c +++ b/drivers/net/bnx2.c @@ -543,9 +543,9 @@ bnx2_free_rx_mem(struct bnx2 *bp) for (j = 0; j < bp->rx_max_pg_ring; j++) { if (rxr->rx_pg_desc_ring[j]) pci_free_consistent(bp->pdev, RXBD_RING_SIZE, - rxr->rx_pg_desc_ring[i], - rxr->rx_pg_desc_mapping[i]); - rxr->rx_pg_desc_ring[i] = NULL; + rxr->rx_pg_desc_ring[j], + rxr->rx_pg_desc_mapping[j]); + rxr->rx_pg_desc_ring[j] = NULL; } if (rxr->rx_pg_ring) vfree(rxr->rx_pg_ring); diff --git a/drivers/net/enc28j60.c b/drivers/net/enc28j60.c index c414554ac32..36cb6e95b46 100644 --- a/drivers/net/enc28j60.c +++ b/drivers/net/enc28j60.c @@ -959,7 +959,7 @@ static void enc28j60_hw_rx(struct net_device *ndev) ndev->stats.rx_packets++; ndev->stats.rx_bytes += len; ndev->last_rx = jiffies; - netif_rx(skb); + netif_rx_ni(skb); } } /* diff --git a/drivers/net/jme.h b/drivers/net/jme.h index f863aee6648..3f5d9154324 100644 --- a/drivers/net/jme.h +++ b/drivers/net/jme.h @@ -22,7 +22,7 @@ */ #ifndef __JME_H_INCLUDED__ -#define __JME_H_INCLUDEE__ +#define __JME_H_INCLUDED__ #define DRV_NAME "jme" #define DRV_VERSION "1.0.3" diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c index 536bda1f428..289fc267edf 100644 --- a/drivers/net/phy/mdio_bus.c +++ b/drivers/net/phy/mdio_bus.c @@ -105,8 +105,6 @@ int mdiobus_register(struct mii_bus *bus) return -EINVAL; } - bus->state = MDIOBUS_REGISTERED; - mutex_init(&bus->mdio_lock); if (bus->reset) @@ -123,6 +121,9 @@ int mdiobus_register(struct mii_bus *bus) } } + if (!err) + bus->state = MDIOBUS_REGISTERED; + pr_info("%s: probed\n", bus->name); return err; diff --git a/drivers/net/ppp_generic.c b/drivers/net/ppp_generic.c index 7e857e938ad..714a23035de 100644 --- a/drivers/net/ppp_generic.c +++ b/drivers/net/ppp_generic.c @@ -116,6 +116,7 @@ struct ppp { unsigned long last_xmit; /* jiffies when last pkt sent 9c */ unsigned long last_recv; /* jiffies when last pkt rcvd a0 */ struct net_device *dev; /* network interface device a4 */ + int closing; /* is device closing down? a8 */ #ifdef CONFIG_PPP_MULTILINK int nxchan; /* next channel to send something on */ u32 nxseq; /* next sequence number to send */ @@ -995,7 +996,7 @@ ppp_xmit_process(struct ppp *ppp) struct sk_buff *skb; ppp_xmit_lock(ppp); - if (ppp->dev) { + if (!ppp->closing) { ppp_push(ppp); while (!ppp->xmit_pending && (skb = skb_dequeue(&ppp->file.xq))) @@ -1463,8 +1464,7 @@ static inline void ppp_do_recv(struct ppp *ppp, struct sk_buff *skb, struct channel *pch) { ppp_recv_lock(ppp); - /* ppp->dev == 0 means interface is closing down */ - if (ppp->dev) + if (!ppp->closing) ppp_receive_frame(ppp, skb, pch); else kfree_skb(skb); @@ -2498,18 +2498,16 @@ init_ppp_file(struct ppp_file *pf, int kind) */ static void ppp_shutdown_interface(struct ppp *ppp) { - struct net_device *dev; - mutex_lock(&all_ppp_mutex); - ppp_lock(ppp); - dev = ppp->dev; - ppp->dev = NULL; - ppp_unlock(ppp); /* This will call dev_close() for us. */ - if (dev) { - unregister_netdev(dev); - free_netdev(dev); - } + ppp_lock(ppp); + if (!ppp->closing) { + ppp->closing = 1; + ppp_unlock(ppp); + unregister_netdev(ppp->dev); + } else + ppp_unlock(ppp); + cardmap_set(&all_ppp_units, ppp->file.index, NULL); ppp->file.dead = 1; ppp->owner = NULL; @@ -2554,7 +2552,7 @@ static void ppp_destroy_interface(struct ppp *ppp) if (ppp->xmit_pending) kfree_skb(ppp->xmit_pending); - kfree(ppp); + free_netdev(ppp->dev); } /* @@ -2616,7 +2614,7 @@ ppp_connect_channel(struct channel *pch, int unit) if (pch->file.hdrlen > ppp->file.hdrlen) ppp->file.hdrlen = pch->file.hdrlen; hdrlen = pch->file.hdrlen + 2; /* for protocol bytes */ - if (ppp->dev && hdrlen > ppp->dev->hard_header_len) + if (hdrlen > ppp->dev->hard_header_len) ppp->dev->hard_header_len = hdrlen; list_add_tail(&pch->clist, &ppp->channels); ++ppp->n_channels; diff --git a/drivers/net/starfire.c b/drivers/net/starfire.c index 1d2ef8f4778..5a40f2d78be 100644 --- a/drivers/net/starfire.c +++ b/drivers/net/starfire.c @@ -1509,6 +1509,11 @@ static int __netdev_rx(struct net_device *dev, int *quota) desc->status = 0; np->rx_done = (np->rx_done + 1) % DONE_Q_SIZE; } + + if (*quota == 0) { /* out of rx quota */ + retcode = 1; + goto out; + } writew(np->rx_done, np->base + CompletionQConsumerIdx); out: diff --git a/drivers/net/tlan.c b/drivers/net/tlan.c index c41d6876136..e60498232b9 100644 --- a/drivers/net/tlan.c +++ b/drivers/net/tlan.c @@ -1098,6 +1098,7 @@ static int TLan_StartTx( struct sk_buff *skb, struct net_device *dev ) dma_addr_t tail_list_phys; u8 *tail_buffer; unsigned long flags; + unsigned int txlen; if ( ! priv->phyOnline ) { TLAN_DBG( TLAN_DEBUG_TX, "TRANSMIT: %s PHY is not ready\n", @@ -1108,6 +1109,7 @@ static int TLan_StartTx( struct sk_buff *skb, struct net_device *dev ) if (skb_padto(skb, TLAN_MIN_FRAME_SIZE)) return 0; + txlen = max(skb->len, (unsigned int)TLAN_MIN_FRAME_SIZE); tail_list = priv->txList + priv->txTail; tail_list_phys = priv->txListDMA + sizeof(TLanList) * priv->txTail; @@ -1125,16 +1127,16 @@ static int TLan_StartTx( struct sk_buff *skb, struct net_device *dev ) if ( bbuf ) { tail_buffer = priv->txBuffer + ( priv->txTail * TLAN_MAX_FRAME_SIZE ); - skb_copy_from_linear_data(skb, tail_buffer, skb->len); + skb_copy_from_linear_data(skb, tail_buffer, txlen); } else { tail_list->buffer[0].address = pci_map_single(priv->pciDev, - skb->data, skb->len, + skb->data, txlen, PCI_DMA_TODEVICE); TLan_StoreSKB(tail_list, skb); } - tail_list->frameSize = (u16) skb->len; - tail_list->buffer[0].count = TLAN_LAST_BUFFER | (u32) skb->len; + tail_list->frameSize = (u16) txlen; + tail_list->buffer[0].count = TLAN_LAST_BUFFER | (u32) txlen; tail_list->buffer[1].count = 0; tail_list->buffer[1].address = 0; @@ -1431,7 +1433,9 @@ static u32 TLan_HandleTxEOF( struct net_device *dev, u16 host_int ) if ( ! bbuf ) { struct sk_buff *skb = TLan_GetSKB(head_list); pci_unmap_single(priv->pciDev, head_list->buffer[0].address, - skb->len, PCI_DMA_TODEVICE); + max(skb->len, + (unsigned int)TLAN_MIN_FRAME_SIZE), + PCI_DMA_TODEVICE); dev_kfree_skb_any(skb); head_list->buffer[8].address = 0; head_list->buffer[9].address = 0; @@ -2055,9 +2059,12 @@ static void TLan_FreeLists( struct net_device *dev ) list = priv->txList + i; skb = TLan_GetSKB(list); if ( skb ) { - pci_unmap_single(priv->pciDev, - list->buffer[0].address, skb->len, - PCI_DMA_TODEVICE); + pci_unmap_single( + priv->pciDev, + list->buffer[0].address, + max(skb->len, + (unsigned int)TLAN_MIN_FRAME_SIZE), + PCI_DMA_TODEVICE); dev_kfree_skb_any( skb ); list->buffer[8].address = 0; list->buffer[9].address = 0; diff --git a/drivers/pci/hotplug/acpiphp.h b/drivers/pci/hotplug/acpiphp.h index f9e244da30a..9bcb6cbd5aa 100644 --- a/drivers/pci/hotplug/acpiphp.h +++ b/drivers/pci/hotplug/acpiphp.h @@ -113,7 +113,7 @@ struct acpiphp_slot { u8 device; /* pci device# */ - u32 sun; /* ACPI _SUN (slot unique number) */ + unsigned long long sun; /* ACPI _SUN (slot unique number) */ u32 flags; /* see below */ }; diff --git a/drivers/pci/hotplug/acpiphp_core.c b/drivers/pci/hotplug/acpiphp_core.c index 95b536a23d2..43c10bd261b 100644 --- a/drivers/pci/hotplug/acpiphp_core.c +++ b/drivers/pci/hotplug/acpiphp_core.c @@ -337,7 +337,7 @@ int acpiphp_register_hotplug_slot(struct acpiphp_slot *acpiphp_slot) slot->hotplug_slot->info->cur_bus_speed = PCI_SPEED_UNKNOWN; acpiphp_slot->slot = slot; - snprintf(name, SLOT_NAME_SIZE, "%u", slot->acpi_slot->sun); + snprintf(name, SLOT_NAME_SIZE, "%llu", slot->acpi_slot->sun); retval = pci_hp_register(slot->hotplug_slot, acpiphp_slot->bridge->pci_bus, diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c index 955aae4071f..3affc6472e6 100644 --- a/drivers/pci/hotplug/acpiphp_glue.c +++ b/drivers/pci/hotplug/acpiphp_glue.c @@ -255,13 +255,13 @@ register_slot(acpi_handle handle, u32 lvl, void *context, void **rv) bridge->nr_slots++; - dbg("found ACPI PCI Hotplug slot %d at PCI %04x:%02x:%02x\n", + dbg("found ACPI PCI Hotplug slot %llu at PCI %04x:%02x:%02x\n", slot->sun, pci_domain_nr(bridge->pci_bus), bridge->pci_bus->number, slot->device); retval = acpiphp_register_hotplug_slot(slot); if (retval) { if (retval == -EBUSY) - warn("Slot %d already registered by another " + warn("Slot %llu already registered by another " "hotplug driver\n", slot->sun); else warn("acpiphp_register_hotplug_slot failed " diff --git a/drivers/pci/hotplug/ibmphp_core.c b/drivers/pci/hotplug/ibmphp_core.c index c892daae74d..633e743442a 100644 --- a/drivers/pci/hotplug/ibmphp_core.c +++ b/drivers/pci/hotplug/ibmphp_core.c @@ -1402,10 +1402,6 @@ static int __init ibmphp_init(void) goto error; } - /* lock ourselves into memory with a module - * count of -1 so that no one can unload us. */ - module_put(THIS_MODULE); - exit: return rc; @@ -1423,4 +1419,3 @@ static void __exit ibmphp_exit(void) } module_init(ibmphp_init); -module_exit(ibmphp_exit); diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c index 4b23bc39b11..39cf248d24e 100644 --- a/drivers/pci/hotplug/pciehp_core.c +++ b/drivers/pci/hotplug/pciehp_core.c @@ -432,18 +432,19 @@ static int pciehp_probe(struct pcie_device *dev, const struct pcie_port_service_ goto err_out_release_ctlr; } + /* Check if slot is occupied */ t_slot = pciehp_find_slot(ctrl, ctrl->slot_device_offset); - - t_slot->hpc_ops->get_adapter_status(t_slot, &value); /* Check if slot is occupied */ - if (value && pciehp_force) { - rc = pciehp_enable_slot(t_slot); - if (rc) /* -ENODEV: shouldn't happen, but deal with it */ - value = 0; - } - if ((POWER_CTRL(ctrl)) && !value) { - rc = t_slot->hpc_ops->power_off_slot(t_slot); /* Power off slot if not occupied*/ - if (rc) - goto err_out_free_ctrl_slot; + t_slot->hpc_ops->get_adapter_status(t_slot, &value); + if (value) { + if (pciehp_force) + pciehp_enable_slot(t_slot); + } else { + /* Power off slot if not occupied */ + if (POWER_CTRL(ctrl)) { + rc = t_slot->hpc_ops->power_off_slot(t_slot); + if (rc) + goto err_out_free_ctrl_slot; + } } return 0; diff --git a/drivers/pci/pcie/aer/aerdrv_core.c b/drivers/pci/pcie/aer/aerdrv_core.c index dfc63d01f20..aac7006949f 100644 --- a/drivers/pci/pcie/aer/aerdrv_core.c +++ b/drivers/pci/pcie/aer/aerdrv_core.c @@ -252,7 +252,7 @@ static void report_resume(struct pci_dev *dev, void *data) if (!dev->driver || !dev->driver->err_handler || - !dev->driver->err_handler->slot_reset) + !dev->driver->err_handler->resume) return; err_handler = dev->driver->err_handler; diff --git a/drivers/rtc/rtc-isl1208.c b/drivers/rtc/rtc-isl1208.c index 2cd77ab8fc6..054e05294af 100644 --- a/drivers/rtc/rtc-isl1208.c +++ b/drivers/rtc/rtc-isl1208.c @@ -328,6 +328,13 @@ isl1208_i2c_set_time(struct i2c_client *client, struct rtc_time const *tm) int sr; u8 regs[ISL1208_RTC_SECTION_LEN] = { 0, }; + /* The clock has an 8 bit wide bcd-coded register (they never learn) + * for the year. tm_year is an offset from 1900 and we are interested + * in the 2000-2099 range, so any value less than 100 is invalid. + */ + if (tm->tm_year < 100) + return -EINVAL; + regs[ISL1208_REG_SC] = bin2bcd(tm->tm_sec); regs[ISL1208_REG_MN] = bin2bcd(tm->tm_min); regs[ISL1208_REG_HR] = bin2bcd(tm->tm_hour) | ISL1208_REG_HR_MIL; diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c index 162cd927d94..94acbeed4e7 100644 --- a/drivers/scsi/aacraid/linit.c +++ b/drivers/scsi/aacraid/linit.c @@ -175,8 +175,8 @@ static struct aac_driver_ident aac_drivers[] = { { aac_rx_init, "percraid", "DELL ", "PERCRAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* PERC 3/Di (Boxster/PERC3DiB) */ { aac_rx_init, "aacraid", "ADAPTEC ", "catapult ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* catapult */ { aac_rx_init, "aacraid", "ADAPTEC ", "tomcat ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* tomcat */ - { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 2120S ", 1, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Adaptec 2120S (Crusader) */ - { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 2200S ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Adaptec 2200S (Vulcan) */ + { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 2120S ", 1, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Adaptec 2120S (Crusader) */ + { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 2200S ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Adaptec 2200S (Vulcan) */ { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 2200S ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Adaptec 2200S (Vulcan-2m) */ { aac_rx_init, "aacraid", "Legend ", "Legend S220 ", 1, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Legend S220 (Legend Crusader) */ { aac_rx_init, "aacraid", "Legend ", "Legend S230 ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Legend S230 (Legend Vulcan) */ diff --git a/drivers/scsi/ibmvscsi/ibmvstgt.c b/drivers/scsi/ibmvscsi/ibmvstgt.c index 2a5b29d1217..e2dd6a45924 100644 --- a/drivers/scsi/ibmvscsi/ibmvstgt.c +++ b/drivers/scsi/ibmvscsi/ibmvstgt.c @@ -864,21 +864,23 @@ static int ibmvstgt_probe(struct vio_dev *dev, const struct vio_device_id *id) INIT_WORK(&vport->crq_work, handle_crq); - err = crq_queue_create(&vport->crq_queue, target); + err = scsi_add_host(shost, target->dev); if (err) goto free_srp_target; - err = scsi_add_host(shost, target->dev); + err = scsi_tgt_alloc_queue(shost); if (err) - goto destroy_queue; + goto remove_host; - err = scsi_tgt_alloc_queue(shost); + err = crq_queue_create(&vport->crq_queue, target); if (err) - goto destroy_queue; + goto free_queue; return 0; -destroy_queue: - crq_queue_destroy(target); +free_queue: + scsi_tgt_free_queue(shost); +remove_host: + scsi_remove_host(shost); free_srp_target: srp_target_free(target); put_host: diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index 801c7cf54d2..3fdee7370cc 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -489,12 +489,6 @@ __iscsi_conn_send_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr, if (!__kfifo_get(session->cmdpool.queue, (void*)&task, sizeof(void*))) return NULL; - - if ((hdr->opcode == (ISCSI_OP_NOOP_OUT | ISCSI_OP_IMMEDIATE)) && - hdr->ttt == RESERVED_ITT) { - conn->ping_task = task; - conn->last_ping = jiffies; - } } /* * released in complete pdu for task we expect a response for, and @@ -703,6 +697,11 @@ static void iscsi_send_nopout(struct iscsi_conn *conn, struct iscsi_nopin *rhdr) task = __iscsi_conn_send_pdu(conn, (struct iscsi_hdr *)&hdr, NULL, 0); if (!task) iscsi_conn_printk(KERN_ERR, conn, "Could not send nopout\n"); + else if (!rhdr) { + /* only track our nops */ + conn->ping_task = task; + conn->last_ping = jiffies; + } } static int iscsi_handle_reject(struct iscsi_conn *conn, struct iscsi_hdr *hdr, diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index fa45a1a6686..148d3af92ae 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -648,8 +648,8 @@ static void scsi_requeue_command(struct request_queue *q, struct scsi_cmnd *cmd) struct request *req = cmd->request; unsigned long flags; - scsi_unprep_request(req); spin_lock_irqsave(q->queue_lock, flags); + scsi_unprep_request(req); blk_requeue_request(q, req); spin_unlock_irqrestore(q->queue_lock, flags); diff --git a/drivers/w1/w1_io.c b/drivers/w1/w1_io.c index 0d15b0eaf79..5139c25ca96 100644 --- a/drivers/w1/w1_io.c +++ b/drivers/w1/w1_io.c @@ -356,7 +356,9 @@ int w1_reset_select_slave(struct w1_slave *sl) w1_write_8(sl->master, W1_SKIP_ROM); else { u8 match[9] = {W1_MATCH_ROM, }; - memcpy(&match[1], (u8 *)&sl->reg_num, 8); + u64 rn = le64_to_cpu(*((u64*)&sl->reg_num)); + + memcpy(&match[1], &rn, 8); w1_write_block(sl->master, match, 9); } return 0; |