diff options
Diffstat (limited to 'drivers')
500 files changed, 36894 insertions, 25427 deletions
diff --git a/drivers/acpi/glue.c b/drivers/acpi/glue.c index 10f160dc75b..a2f46d587d5 100644 --- a/drivers/acpi/glue.c +++ b/drivers/acpi/glue.c @@ -267,9 +267,9 @@ static int acpi_bind_one(struct device *dev, acpi_handle handle) { acpi_status status; - if (dev->firmware_data) { + if (dev->archdata.acpi_handle) { printk(KERN_WARNING PREFIX - "Drivers changed 'firmware_data' for %s\n", dev->bus_id); + "Drivers changed 'acpi_handle' for %s\n", dev->bus_id); return -EINVAL; } get_device(dev); @@ -278,25 +278,26 @@ static int acpi_bind_one(struct device *dev, acpi_handle handle) put_device(dev); return -EINVAL; } - dev->firmware_data = handle; + dev->archdata.acpi_handle = handle; return 0; } static int acpi_unbind_one(struct device *dev) { - if (!dev->firmware_data) + if (!dev->archdata.acpi_handle) return 0; - if (dev == acpi_get_physical_device(dev->firmware_data)) { + if (dev == acpi_get_physical_device(dev->archdata.acpi_handle)) { /* acpi_get_physical_device increase refcnt by one */ put_device(dev); - acpi_detach_data(dev->firmware_data, acpi_glue_data_handler); - dev->firmware_data = NULL; + acpi_detach_data(dev->archdata.acpi_handle, + acpi_glue_data_handler); + dev->archdata.acpi_handle = NULL; /* acpi_bind_one increase refcnt by one */ put_device(dev); } else { printk(KERN_ERR PREFIX - "Oops, 'firmware_data' corrupt for %s\n", dev->bus_id); + "Oops, 'acpi_handle' corrupt for %s\n", dev->bus_id); } return 0; } @@ -328,7 +329,8 @@ static int acpi_platform_notify(struct device *dev) if (!ret) { struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; - acpi_get_name(dev->firmware_data, ACPI_FULL_PATHNAME, &buffer); + acpi_get_name(dev->archdata.acpi_handle, + ACPI_FULL_PATHNAME, &buffer); DBG("Device %s -> %s\n", dev->bus_id, (char *)buffer.pointer); kfree(buffer.pointer); } else diff --git a/drivers/acpi/processor_perflib.c b/drivers/acpi/processor_perflib.c index 7ba5e49ab30..6fd174a3714 100644 --- a/drivers/acpi/processor_perflib.c +++ b/drivers/acpi/processor_perflib.c @@ -83,10 +83,8 @@ static int acpi_processor_ppc_notifier(struct notifier_block *nb, goto out; ppc = (unsigned int)pr->performance_platform_limit; - if (!ppc) - goto out; - if (ppc > pr->performance->state_count) + if (ppc >= pr->performance->state_count) goto out; cpufreq_verify_within_limits(policy, 0, diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 234197e57e9..bddb14e91d3 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -78,6 +78,7 @@ enum { board_ahci = 0, board_ahci_vt8251 = 1, + board_ahci_ign_iferr = 2, /* global controller registers */ HOST_CAP = 0x00, /* host capabilities */ @@ -168,6 +169,7 @@ enum { /* ap->flags bits */ AHCI_FLAG_RESET_NEEDS_CLO = (1 << 24), AHCI_FLAG_NO_NCQ = (1 << 25), + AHCI_FLAG_IGN_IRQ_IF_ERR = (1 << 26), /* ignore IRQ_IF_ERR */ }; struct ahci_cmd_hdr { @@ -295,6 +297,17 @@ static const struct ata_port_info ahci_port_info[] = { .udma_mask = 0x7f, /* udma0-6 ; FIXME */ .port_ops = &ahci_ops, }, + /* board_ahci_ign_iferr */ + { + .sht = &ahci_sht, + .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | + ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA | + ATA_FLAG_SKIP_D2H_BSY | + AHCI_FLAG_IGN_IRQ_IF_ERR, + .pio_mask = 0x1f, /* pio0-4 */ + .udma_mask = 0x7f, /* udma0-6 ; FIXME */ + .port_ops = &ahci_ops, + }, }; static const struct pci_device_id ahci_pci_tbl[] = { @@ -314,13 +327,24 @@ static const struct pci_device_id ahci_pci_tbl[] = { { PCI_VDEVICE(INTEL, 0x2824), board_ahci }, /* ICH8 */ { PCI_VDEVICE(INTEL, 0x2829), board_ahci }, /* ICH8M */ { PCI_VDEVICE(INTEL, 0x282a), board_ahci }, /* ICH8M */ + { PCI_VDEVICE(INTEL, 0x2922), board_ahci }, /* ICH9 */ + { PCI_VDEVICE(INTEL, 0x2923), board_ahci }, /* ICH9 */ + { PCI_VDEVICE(INTEL, 0x2924), board_ahci }, /* ICH9 */ + { PCI_VDEVICE(INTEL, 0x2925), board_ahci }, /* ICH9 */ + { PCI_VDEVICE(INTEL, 0x2927), board_ahci }, /* ICH9 */ + { PCI_VDEVICE(INTEL, 0x2929), board_ahci }, /* ICH9M */ + { PCI_VDEVICE(INTEL, 0x292a), board_ahci }, /* ICH9M */ + { PCI_VDEVICE(INTEL, 0x292b), board_ahci }, /* ICH9M */ + { PCI_VDEVICE(INTEL, 0x292f), board_ahci }, /* ICH9M */ + { PCI_VDEVICE(INTEL, 0x294d), board_ahci }, /* ICH9 */ + { PCI_VDEVICE(INTEL, 0x294e), board_ahci }, /* ICH9M */ /* JMicron */ - { PCI_VDEVICE(JMICRON, 0x2360), board_ahci }, /* JMicron JMB360 */ - { PCI_VDEVICE(JMICRON, 0x2361), board_ahci }, /* JMicron JMB361 */ - { PCI_VDEVICE(JMICRON, 0x2363), board_ahci }, /* JMicron JMB363 */ - { PCI_VDEVICE(JMICRON, 0x2365), board_ahci }, /* JMicron JMB365 */ - { PCI_VDEVICE(JMICRON, 0x2366), board_ahci }, /* JMicron JMB366 */ + { PCI_VDEVICE(JMICRON, 0x2360), board_ahci_ign_iferr }, /* JMB360 */ + { PCI_VDEVICE(JMICRON, 0x2361), board_ahci_ign_iferr }, /* JMB361 */ + { PCI_VDEVICE(JMICRON, 0x2363), board_ahci_ign_iferr }, /* JMB363 */ + { PCI_VDEVICE(JMICRON, 0x2365), board_ahci_ign_iferr }, /* JMB365 */ + { PCI_VDEVICE(JMICRON, 0x2366), board_ahci_ign_iferr }, /* JMB366 */ /* ATI */ { PCI_VDEVICE(ATI, 0x4380), board_ahci }, /* ATI SB600 non-raid */ @@ -969,6 +993,10 @@ static void ahci_error_intr(struct ata_port *ap, u32 irq_stat) /* analyze @irq_stat */ ata_ehi_push_desc(ehi, "irq_stat 0x%08x", irq_stat); + /* some controllers set IRQ_IF_ERR on device errors, ignore it */ + if (ap->flags & AHCI_FLAG_IGN_IRQ_IF_ERR) + irq_stat &= ~PORT_IRQ_IF_ERR; + if (irq_stat & PORT_IRQ_TF_ERR) err_mask |= AC_ERR_DEV; diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c index 377425e7139..4a80ff9312b 100644 --- a/drivers/ata/ata_generic.c +++ b/drivers/ata/ata_generic.c @@ -116,6 +116,7 @@ static struct scsi_host_template generic_sht = { .proc_name = DRV_NAME, .dma_boundary = ATA_DMA_BOUNDARY, .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, }; diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index c872b324dbd..4c32d93d44b 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -1451,6 +1451,7 @@ nothing_to_do: static void ata_scsi_qc_complete(struct ata_queued_cmd *qc) { + struct ata_port *ap = qc->ap; struct scsi_cmnd *cmd = qc->scsicmd; u8 *cdb = cmd->cmnd; int need_sense = (qc->err_mask != 0); @@ -1459,11 +1460,12 @@ static void ata_scsi_qc_complete(struct ata_queued_cmd *qc) * schedule EH_REVALIDATE operation to update the IDENTIFY DEVICE * cache */ - if (!need_sense && (qc->tf.command == ATA_CMD_SET_FEATURES) && + if (ap->ops->error_handler && + !need_sense && (qc->tf.command == ATA_CMD_SET_FEATURES) && ((qc->tf.feature == SETFEATURES_WC_ON) || (qc->tf.feature == SETFEATURES_WC_OFF))) { - qc->ap->eh_info.action |= ATA_EH_REVALIDATE; - ata_port_schedule_eh(qc->ap); + ap->eh_info.action |= ATA_EH_REVALIDATE; + ata_port_schedule_eh(ap); } /* For ATA pass thru (SAT) commands, generate a sense block if @@ -1490,8 +1492,8 @@ static void ata_scsi_qc_complete(struct ata_queued_cmd *qc) } } - if (need_sense && !qc->ap->ops->error_handler) - ata_dump_status(qc->ap->id, &qc->result_tf); + if (need_sense && !ap->ops->error_handler) + ata_dump_status(ap->id, &qc->result_tf); qc->scsidone(cmd); @@ -3347,20 +3349,23 @@ EXPORT_SYMBOL_GPL(ata_sas_slave_configure); * @ap: ATA port to which the command is being sent * * RETURNS: - * Zero. + * Return value from __ata_scsi_queuecmd() if @cmd can be queued, + * 0 otherwise. */ int ata_sas_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *), struct ata_port *ap) { + int rc = 0; + ata_scsi_dump_cdb(ap, cmd); if (likely(ata_scsi_dev_enabled(ap->device))) - __ata_scsi_queuecmd(cmd, done, ap->device); + rc = __ata_scsi_queuecmd(cmd, done, ap->device); else { cmd->result = (DID_BAD_TARGET << 16); done(cmd); } - return 0; + return rc; } EXPORT_SYMBOL_GPL(ata_sas_queuecmd); diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c index 1d695df5860..64eed99f681 100644 --- a/drivers/ata/pata_ali.c +++ b/drivers/ata/pata_ali.c @@ -346,6 +346,7 @@ static struct scsi_host_template ali_sht = { .proc_name = DRV_NAME, .dma_boundary = ATA_DMA_BOUNDARY, .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, }; diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c index 5c47a9e0e0c..8be46a63af7 100644 --- a/drivers/ata/pata_amd.c +++ b/drivers/ata/pata_amd.c @@ -333,6 +333,7 @@ static struct scsi_host_template amd_sht = { .proc_name = DRV_NAME, .dma_boundary = ATA_DMA_BOUNDARY, .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, }; diff --git a/drivers/ata/pata_artop.c b/drivers/ata/pata_artop.c index 96a098020a8..2cd30761ca1 100644 --- a/drivers/ata/pata_artop.c +++ b/drivers/ata/pata_artop.c @@ -314,6 +314,7 @@ static struct scsi_host_template artop_sht = { .proc_name = DRV_NAME, .dma_boundary = ATA_DMA_BOUNDARY, .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, }; diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c index 1ce28d2125f..4e1d3b59adb 100644 --- a/drivers/ata/pata_atiixp.c +++ b/drivers/ata/pata_atiixp.c @@ -216,6 +216,7 @@ static struct scsi_host_template atiixp_sht = { .proc_name = DRV_NAME, .dma_boundary = ATA_DMA_BOUNDARY, .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, }; diff --git a/drivers/ata/pata_cmd64x.c b/drivers/ata/pata_cmd64x.c index b9bbd1d454b..29a60df465d 100644 --- a/drivers/ata/pata_cmd64x.c +++ b/drivers/ata/pata_cmd64x.c @@ -275,6 +275,7 @@ static struct scsi_host_template cmd64x_sht = { .proc_name = DRV_NAME, .dma_boundary = ATA_DMA_BOUNDARY, .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, }; diff --git a/drivers/ata/pata_cs5520.c b/drivers/ata/pata_cs5520.c index 2cd3c0ff76d..33d2b88f9c7 100644 --- a/drivers/ata/pata_cs5520.c +++ b/drivers/ata/pata_cs5520.c @@ -166,6 +166,7 @@ static struct scsi_host_template cs5520_sht = { .proc_name = DRV_NAME, .dma_boundary = ATA_DMA_BOUNDARY, .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, }; diff --git a/drivers/ata/pata_cs5530.c b/drivers/ata/pata_cs5530.c index a07cc81ef79..981f4922346 100644 --- a/drivers/ata/pata_cs5530.c +++ b/drivers/ata/pata_cs5530.c @@ -180,6 +180,7 @@ static struct scsi_host_template cs5530_sht = { .proc_name = DRV_NAME, .dma_boundary = ATA_DMA_BOUNDARY, .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, }; diff --git a/drivers/ata/pata_cs5535.c b/drivers/ata/pata_cs5535.c index f8def3f9c61..8dafa4a49fd 100644 --- a/drivers/ata/pata_cs5535.c +++ b/drivers/ata/pata_cs5535.c @@ -184,6 +184,7 @@ static struct scsi_host_template cs5535_sht = { .proc_name = DRV_NAME, .dma_boundary = ATA_DMA_BOUNDARY, .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, }; diff --git a/drivers/ata/pata_cypress.c b/drivers/ata/pata_cypress.c index 247b43608b1..5a0b811907e 100644 --- a/drivers/ata/pata_cypress.c +++ b/drivers/ata/pata_cypress.c @@ -135,6 +135,7 @@ static struct scsi_host_template cy82c693_sht = { .proc_name = DRV_NAME, .dma_boundary = ATA_DMA_BOUNDARY, .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, }; diff --git a/drivers/ata/pata_efar.c b/drivers/ata/pata_efar.c index ef18c60fe14..755f79279de 100644 --- a/drivers/ata/pata_efar.c +++ b/drivers/ata/pata_efar.c @@ -233,6 +233,7 @@ static struct scsi_host_template efar_sht = { .proc_name = DRV_NAME, .dma_boundary = ATA_DMA_BOUNDARY, .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, }; diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c index 6d3e4c0f15f..c0e150a9586 100644 --- a/drivers/ata/pata_hpt366.c +++ b/drivers/ata/pata_hpt366.c @@ -329,6 +329,7 @@ static struct scsi_host_template hpt36x_sht = { .proc_name = DRV_NAME, .dma_boundary = ATA_DMA_BOUNDARY, .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, }; diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c index fce3fcdc7e7..1eeb16f0fb0 100644 --- a/drivers/ata/pata_hpt37x.c +++ b/drivers/ata/pata_hpt37x.c @@ -775,6 +775,7 @@ static struct scsi_host_template hpt37x_sht = { .proc_name = DRV_NAME, .dma_boundary = ATA_DMA_BOUNDARY, .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, }; diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c index 58cfb2bc809..47d7664e9ee 100644 --- a/drivers/ata/pata_hpt3x2n.c +++ b/drivers/ata/pata_hpt3x2n.c @@ -341,6 +341,7 @@ static struct scsi_host_template hpt3x2n_sht = { .proc_name = DRV_NAME, .dma_boundary = ATA_DMA_BOUNDARY, .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, }; diff --git a/drivers/ata/pata_hpt3x3.c b/drivers/ata/pata_hpt3x3.c index 3334d72e251..d216cc564b5 100644 --- a/drivers/ata/pata_hpt3x3.c +++ b/drivers/ata/pata_hpt3x3.c @@ -118,6 +118,7 @@ static struct scsi_host_template hpt3x3_sht = { .proc_name = DRV_NAME, .dma_boundary = ATA_DMA_BOUNDARY, .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, }; diff --git a/drivers/ata/pata_isapnp.c b/drivers/ata/pata_isapnp.c index 640b8b0954f..40ca2b82b7f 100644 --- a/drivers/ata/pata_isapnp.c +++ b/drivers/ata/pata_isapnp.c @@ -34,6 +34,7 @@ static struct scsi_host_template isapnp_sht = { .proc_name = DRV_NAME, .dma_boundary = ATA_DMA_BOUNDARY, .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, }; diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c index 18ff3e59a89..7f68f14be6f 100644 --- a/drivers/ata/pata_it821x.c +++ b/drivers/ata/pata_it821x.c @@ -675,6 +675,7 @@ static struct scsi_host_template it821x_sht = { .proc_name = DRV_NAME, .dma_boundary = ATA_DMA_BOUNDARY, .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, }; diff --git a/drivers/ata/pata_jmicron.c b/drivers/ata/pata_jmicron.c index 52a2bdf3c38..0210b10d49c 100644 --- a/drivers/ata/pata_jmicron.c +++ b/drivers/ata/pata_jmicron.c @@ -136,6 +136,7 @@ static struct scsi_host_template jmicron_sht = { .proc_name = DRV_NAME, .dma_boundary = ATA_DMA_BOUNDARY, .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, /* Use standard CHS mapping rules */ .bios_param = ata_std_bios_param, }; diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c index 10231ef731d..b39078b2a47 100644 --- a/drivers/ata/pata_legacy.c +++ b/drivers/ata/pata_legacy.c @@ -135,6 +135,7 @@ static struct scsi_host_template legacy_sht = { .proc_name = DRV_NAME, .dma_boundary = ATA_DMA_BOUNDARY, .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, }; diff --git a/drivers/ata/pata_mpiix.c b/drivers/ata/pata_mpiix.c index 9dfe3e9abea..e00d406bfdf 100644 --- a/drivers/ata/pata_mpiix.c +++ b/drivers/ata/pata_mpiix.c @@ -166,6 +166,7 @@ static struct scsi_host_template mpiix_sht = { .proc_name = DRV_NAME, .dma_boundary = ATA_DMA_BOUNDARY, .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, }; diff --git a/drivers/ata/pata_netcell.c b/drivers/ata/pata_netcell.c index f5672de99c2..1963a4d3587 100644 --- a/drivers/ata/pata_netcell.c +++ b/drivers/ata/pata_netcell.c @@ -62,6 +62,7 @@ static struct scsi_host_template netcell_sht = { .proc_name = DRV_NAME, .dma_boundary = ATA_DMA_BOUNDARY, .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, /* Use standard CHS mapping rules */ .bios_param = ata_std_bios_param, }; diff --git a/drivers/ata/pata_ns87410.c b/drivers/ata/pata_ns87410.c index 2a3dbeed89b..7ec800f00ec 100644 --- a/drivers/ata/pata_ns87410.c +++ b/drivers/ata/pata_ns87410.c @@ -156,6 +156,7 @@ static struct scsi_host_template ns87410_sht = { .proc_name = DRV_NAME, .dma_boundary = ATA_DMA_BOUNDARY, .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, }; diff --git a/drivers/ata/pata_oldpiix.c b/drivers/ata/pata_oldpiix.c index fc947dfecd7..8837256632e 100644 --- a/drivers/ata/pata_oldpiix.c +++ b/drivers/ata/pata_oldpiix.c @@ -231,6 +231,7 @@ static struct scsi_host_template oldpiix_sht = { .proc_name = DRV_NAME, .dma_boundary = ATA_DMA_BOUNDARY, .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, }; diff --git a/drivers/ata/pata_opti.c b/drivers/ata/pata_opti.c index a7320ba1557..c6319cf50de 100644 --- a/drivers/ata/pata_opti.c +++ b/drivers/ata/pata_opti.c @@ -202,6 +202,7 @@ static struct scsi_host_template opti_sht = { .proc_name = DRV_NAME, .dma_boundary = ATA_DMA_BOUNDARY, .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, }; diff --git a/drivers/ata/pata_optidma.c b/drivers/ata/pata_optidma.c index c6906b4215d..2f4770cce04 100644 --- a/drivers/ata/pata_optidma.c +++ b/drivers/ata/pata_optidma.c @@ -359,6 +359,7 @@ static struct scsi_host_template optidma_sht = { .proc_name = DRV_NAME, .dma_boundary = ATA_DMA_BOUNDARY, .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, }; diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c index e93ea2702c7..999922de476 100644 --- a/drivers/ata/pata_pcmcia.c +++ b/drivers/ata/pata_pcmcia.c @@ -69,6 +69,7 @@ static struct scsi_host_template pcmcia_sht = { .proc_name = DRV_NAME, .dma_boundary = ATA_DMA_BOUNDARY, .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, }; diff --git a/drivers/ata/pata_pdc2027x.c b/drivers/ata/pata_pdc2027x.c index d894d9918b1..beb6d10a234 100644 --- a/drivers/ata/pata_pdc2027x.c +++ b/drivers/ata/pata_pdc2027x.c @@ -141,6 +141,7 @@ static struct scsi_host_template pdc2027x_sht = { .proc_name = DRV_NAME, .dma_boundary = ATA_DMA_BOUNDARY, .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, }; diff --git a/drivers/ata/pata_pdc202xx_old.c b/drivers/ata/pata_pdc202xx_old.c index 5ba9eb20a6c..6baf51b2fda 100644 --- a/drivers/ata/pata_pdc202xx_old.c +++ b/drivers/ata/pata_pdc202xx_old.c @@ -269,6 +269,7 @@ static struct scsi_host_template pdc_sht = { .proc_name = DRV_NAME, .dma_boundary = ATA_DMA_BOUNDARY, .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, }; diff --git a/drivers/ata/pata_qdi.c b/drivers/ata/pata_qdi.c index 2c3cc0ccc60..314938dea1f 100644 --- a/drivers/ata/pata_qdi.c +++ b/drivers/ata/pata_qdi.c @@ -164,6 +164,7 @@ static struct scsi_host_template qdi_sht = { .proc_name = DRV_NAME, .dma_boundary = ATA_DMA_BOUNDARY, .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, }; diff --git a/drivers/ata/pata_radisys.c b/drivers/ata/pata_radisys.c index 1af83d7694d..048c2bb21ef 100644 --- a/drivers/ata/pata_radisys.c +++ b/drivers/ata/pata_radisys.c @@ -227,6 +227,7 @@ static struct scsi_host_template radisys_sht = { .proc_name = DRV_NAME, .dma_boundary = ATA_DMA_BOUNDARY, .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, }; diff --git a/drivers/ata/pata_rz1000.c b/drivers/ata/pata_rz1000.c index 4533b6357d9..e4e5ea423fe 100644 --- a/drivers/ata/pata_rz1000.c +++ b/drivers/ata/pata_rz1000.c @@ -90,6 +90,7 @@ static struct scsi_host_template rz1000_sht = { .proc_name = DRV_NAME, .dma_boundary = ATA_DMA_BOUNDARY, .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, }; diff --git a/drivers/ata/pata_sc1200.c b/drivers/ata/pata_sc1200.c index 067d9d223e3..0c75dae7476 100644 --- a/drivers/ata/pata_sc1200.c +++ b/drivers/ata/pata_sc1200.c @@ -193,6 +193,7 @@ static struct scsi_host_template sc1200_sht = { .proc_name = DRV_NAME, .dma_boundary = ATA_DMA_BOUNDARY, .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, }; diff --git a/drivers/ata/pata_serverworks.c b/drivers/ata/pata_serverworks.c index 5bbf76ec14a..be7f60efcb6 100644 --- a/drivers/ata/pata_serverworks.c +++ b/drivers/ata/pata_serverworks.c @@ -325,6 +325,7 @@ static struct scsi_host_template serverworks_sht = { .proc_name = DRV_NAME, .dma_boundary = ATA_DMA_BOUNDARY, .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, }; diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c index 4a2b72b4be8..11942fd03b5 100644 --- a/drivers/ata/pata_sil680.c +++ b/drivers/ata/pata_sil680.c @@ -225,6 +225,7 @@ static struct scsi_host_template sil680_sht = { .proc_name = DRV_NAME, .dma_boundary = ATA_DMA_BOUNDARY, .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, }; diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c index b9ffafb4198..91e85f90941 100644 --- a/drivers/ata/pata_sis.c +++ b/drivers/ata/pata_sis.c @@ -545,6 +545,7 @@ static struct scsi_host_template sis_sht = { .proc_name = DRV_NAME, .dma_boundary = ATA_DMA_BOUNDARY, .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, }; diff --git a/drivers/ata/pata_sl82c105.c b/drivers/ata/pata_sl82c105.c index 08a6dc88676..dc1cfc6d805 100644 --- a/drivers/ata/pata_sl82c105.c +++ b/drivers/ata/pata_sl82c105.c @@ -237,6 +237,7 @@ static struct scsi_host_template sl82c105_sht = { .proc_name = DRV_NAME, .dma_boundary = ATA_DMA_BOUNDARY, .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, }; diff --git a/drivers/ata/pata_triflex.c b/drivers/ata/pata_triflex.c index 9640f80e8b0..bfda1f7e760 100644 --- a/drivers/ata/pata_triflex.c +++ b/drivers/ata/pata_triflex.c @@ -192,6 +192,7 @@ static struct scsi_host_template triflex_sht = { .proc_name = DRV_NAME, .dma_boundary = ATA_DMA_BOUNDARY, .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, }; diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c index 1e7be9eee9c..c5f1616d224 100644 --- a/drivers/ata/pata_via.c +++ b/drivers/ata/pata_via.c @@ -295,6 +295,7 @@ static struct scsi_host_template via_sht = { .proc_name = DRV_NAME, .dma_boundary = ATA_DMA_BOUNDARY, .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, }; diff --git a/drivers/atm/ambassador.c b/drivers/atm/ambassador.c index 9fffa7af6db..afa7d750a59 100644 --- a/drivers/atm/ambassador.c +++ b/drivers/atm/ambassador.c @@ -972,7 +972,7 @@ static int make_rate (unsigned int rate, rounding r, } case round_up: { // check all bits that we are discarding - if (man & (-1>>9)) { + if (man & (~0U>>9)) { man = (man>>(32-9)) + 1; if (man == (1<<9)) { // no need to check for round up outside of range diff --git a/drivers/atm/firestream.c b/drivers/atm/firestream.c index 697ad82f663..9c67df5ccfa 100644 --- a/drivers/atm/firestream.c +++ b/drivers/atm/firestream.c @@ -512,7 +512,7 @@ static unsigned int make_rate (unsigned int rate, int r, } case ROUND_UP: { /* check all bits that we are discarding */ - if (man & (-1>>9)) { + if (man & (~0U>>9)) { man = (man>>(32-9)) + 1; if (man == (1<<9)) { /* no need to check for round up outside of range */ diff --git a/drivers/atm/iphase.c b/drivers/atm/iphase.c index 9ed1c60048f..bb7ef570514 100644 --- a/drivers/atm/iphase.c +++ b/drivers/atm/iphase.c @@ -305,7 +305,7 @@ static void clear_lockup (struct atm_vcc *vcc, IADEV *dev) { ** | R | NZ | 5-bit exponent | 9-bit mantissa | ** +----+----+------------------+-------------------------------+ ** -** R = reserverd (written as 0) +** R = reserved (written as 0) ** NZ = 0 if 0 cells/sec; 1 otherwise ** ** if NZ = 1, rate = 1.mmmmmmmmm x 2^(eeeee) cells/sec diff --git a/drivers/base/bus.c b/drivers/base/bus.c index 7d8a7ce73fb..472810f8e6e 100644 --- a/drivers/base/bus.c +++ b/drivers/base/bus.c @@ -355,6 +355,21 @@ static void device_remove_attrs(struct bus_type * bus, struct device * dev) } } +#ifdef CONFIG_SYSFS_DEPRECATED +static int make_deprecated_bus_links(struct device *dev) +{ + return sysfs_create_link(&dev->kobj, + &dev->bus->subsys.kset.kobj, "bus"); +} + +static void remove_deprecated_bus_links(struct device *dev) +{ + sysfs_remove_link(&dev->kobj, "bus"); +} +#else +static inline int make_deprecated_bus_links(struct device *dev) { return 0; } +static inline void remove_deprecated_bus_links(struct device *dev) { } +#endif /** * bus_add_device - add device to bus @@ -381,8 +396,7 @@ int bus_add_device(struct device * dev) &dev->bus->subsys.kset.kobj, "subsystem"); if (error) goto out_subsys; - error = sysfs_create_link(&dev->kobj, - &dev->bus->subsys.kset.kobj, "bus"); + error = make_deprecated_bus_links(dev); if (error) goto out_deprecated; } @@ -436,7 +450,7 @@ void bus_remove_device(struct device * dev) { if (dev->bus) { sysfs_remove_link(&dev->kobj, "subsystem"); - sysfs_remove_link(&dev->kobj, "bus"); + remove_deprecated_bus_links(dev); sysfs_remove_link(&dev->bus->devices.kobj, dev->bus_id); device_remove_attrs(dev->bus, dev); if (dev->is_registered) { @@ -724,6 +738,8 @@ int bus_register(struct bus_type * bus) { int retval; + BLOCKING_INIT_NOTIFIER_HEAD(&bus->bus_notifier); + retval = kobject_set_name(&bus->subsys.kset.kobj, "%s", bus->name); if (retval) goto out; @@ -782,6 +798,18 @@ void bus_unregister(struct bus_type * bus) subsystem_unregister(&bus->subsys); } +int bus_register_notifier(struct bus_type *bus, struct notifier_block *nb) +{ + return blocking_notifier_chain_register(&bus->bus_notifier, nb); +} +EXPORT_SYMBOL_GPL(bus_register_notifier); + +int bus_unregister_notifier(struct bus_type *bus, struct notifier_block *nb) +{ + return blocking_notifier_chain_unregister(&bus->bus_notifier, nb); +} +EXPORT_SYMBOL_GPL(bus_unregister_notifier); + int __init buses_init(void) { return subsystem_register(&bus_subsys); diff --git a/drivers/base/class.c b/drivers/base/class.c index 0ff267a248d..f098881f45b 100644 --- a/drivers/base/class.c +++ b/drivers/base/class.c @@ -352,6 +352,92 @@ static const char *class_uevent_name(struct kset *kset, struct kobject *kobj) return class_dev->class->name; } +#ifdef CONFIG_SYSFS_DEPRECATED +char *make_class_name(const char *name, struct kobject *kobj) +{ + char *class_name; + int size; + + size = strlen(name) + strlen(kobject_name(kobj)) + 2; + + class_name = kmalloc(size, GFP_KERNEL); + if (!class_name) + return ERR_PTR(-ENOMEM); + + strcpy(class_name, name); + strcat(class_name, ":"); + strcat(class_name, kobject_name(kobj)); + return class_name; +} + +static int deprecated_class_uevent(char **envp, int num_envp, int *cur_index, + char *buffer, int buffer_size, + int *cur_len, + struct class_device *class_dev) +{ + struct device *dev = class_dev->dev; + char *path; + + if (!dev) + return 0; + + /* add device, backing this class device (deprecated) */ + path = kobject_get_path(&dev->kobj, GFP_KERNEL); + + add_uevent_var(envp, num_envp, cur_index, buffer, buffer_size, + cur_len, "PHYSDEVPATH=%s", path); + kfree(path); + + if (dev->bus) + add_uevent_var(envp, num_envp, cur_index, + buffer, buffer_size, cur_len, + "PHYSDEVBUS=%s", dev->bus->name); + + if (dev->driver) + add_uevent_var(envp, num_envp, cur_index, + buffer, buffer_size, cur_len, + "PHYSDEVDRIVER=%s", dev->driver->name); + return 0; +} + +static int make_deprecated_class_device_links(struct class_device *class_dev) +{ + char *class_name; + int error; + + if (!class_dev->dev) + return 0; + + class_name = make_class_name(class_dev->class->name, &class_dev->kobj); + error = sysfs_create_link(&class_dev->dev->kobj, &class_dev->kobj, + class_name); + kfree(class_name); + return error; +} + +static void remove_deprecated_class_device_links(struct class_device *class_dev) +{ + char *class_name; + + if (!class_dev->dev) + return; + + class_name = make_class_name(class_dev->class->name, &class_dev->kobj); + sysfs_remove_link(&class_dev->dev->kobj, class_name); + kfree(class_name); +} +#else +static inline int deprecated_class_uevent(char **envp, int num_envp, + int *cur_index, char *buffer, + int buffer_size, int *cur_len, + struct class_device *class_dev) +{ return 0; } +static inline int make_deprecated_class_device_links(struct class_device *cd) +{ return 0; } +static void remove_deprecated_class_device_links(struct class_device *cd) +{ } +#endif + static int class_uevent(struct kset *kset, struct kobject *kobj, char **envp, int num_envp, char *buffer, int buffer_size) { @@ -362,25 +448,8 @@ static int class_uevent(struct kset *kset, struct kobject *kobj, char **envp, pr_debug("%s - name = %s\n", __FUNCTION__, class_dev->class_id); - if (class_dev->dev) { - /* add device, backing this class device (deprecated) */ - struct device *dev = class_dev->dev; - char *path = kobject_get_path(&dev->kobj, GFP_KERNEL); - - add_uevent_var(envp, num_envp, &i, buffer, buffer_size, - &length, "PHYSDEVPATH=%s", path); - kfree(path); - - if (dev->bus) - add_uevent_var(envp, num_envp, &i, - buffer, buffer_size, &length, - "PHYSDEVBUS=%s", dev->bus->name); - - if (dev->driver) - add_uevent_var(envp, num_envp, &i, - buffer, buffer_size, &length, - "PHYSDEVDRIVER=%s", dev->driver->name); - } + deprecated_class_uevent(envp, num_envp, &i, buffer, buffer_size, + &length, class_dev); if (MAJOR(class_dev->devt)) { add_uevent_var(envp, num_envp, &i, @@ -506,29 +575,11 @@ void class_device_initialize(struct class_device *class_dev) INIT_LIST_HEAD(&class_dev->node); } -char *make_class_name(const char *name, struct kobject *kobj) -{ - char *class_name; - int size; - - size = strlen(name) + strlen(kobject_name(kobj)) + 2; - - class_name = kmalloc(size, GFP_KERNEL); - if (!class_name) - return ERR_PTR(-ENOMEM); - - strcpy(class_name, name); - strcat(class_name, ":"); - strcat(class_name, kobject_name(kobj)); - return class_name; -} - int class_device_add(struct class_device *class_dev) { struct class *parent_class = NULL; struct class_device *parent_class_dev = NULL; struct class_interface *class_intf; - char *class_name = NULL; int error = -EINVAL; class_dev = class_device_get(class_dev); @@ -599,20 +650,18 @@ int class_device_add(struct class_device *class_dev) goto out5; if (class_dev->dev) { - class_name = make_class_name(class_dev->class->name, - &class_dev->kobj); error = sysfs_create_link(&class_dev->kobj, &class_dev->dev->kobj, "device"); if (error) goto out6; - error = sysfs_create_link(&class_dev->dev->kobj, &class_dev->kobj, - class_name); - if (error) - goto out7; } error = class_device_add_groups(class_dev); if (error) + goto out7; + + error = make_deprecated_class_device_links(class_dev); + if (error) goto out8; kobject_uevent(&class_dev->kobj, KOBJ_ADD); @@ -629,8 +678,7 @@ int class_device_add(struct class_device *class_dev) goto out1; out8: - if (class_dev->dev) - sysfs_remove_link(&class_dev->kobj, class_name); + class_device_remove_groups(class_dev); out7: if (class_dev->dev) sysfs_remove_link(&class_dev->kobj, "device"); @@ -649,7 +697,6 @@ int class_device_add(struct class_device *class_dev) class_put(parent_class); out1: class_device_put(class_dev); - kfree(class_name); return error; } @@ -726,7 +773,6 @@ void class_device_del(struct class_device *class_dev) struct class *parent_class = class_dev->class; struct class_device *parent_device = class_dev->parent; struct class_interface *class_intf; - char *class_name = NULL; if (parent_class) { down(&parent_class->sem); @@ -738,10 +784,8 @@ void class_device_del(struct class_device *class_dev) } if (class_dev->dev) { - class_name = make_class_name(class_dev->class->name, - &class_dev->kobj); + remove_deprecated_class_device_links(class_dev); sysfs_remove_link(&class_dev->kobj, "device"); - sysfs_remove_link(&class_dev->dev->kobj, class_name); } sysfs_remove_link(&class_dev->kobj, "subsystem"); class_device_remove_file(class_dev, &class_dev->uevent_attr); @@ -755,7 +799,6 @@ void class_device_del(struct class_device *class_dev) class_device_put(parent_device); class_put(parent_class); - kfree(class_name); } void class_device_unregister(struct class_device *class_dev) @@ -804,14 +847,17 @@ int class_device_rename(struct class_device *class_dev, char *new_name) pr_debug("CLASS: renaming '%s' to '%s'\n", class_dev->class_id, new_name); +#ifdef CONFIG_SYSFS_DEPRECATED if (class_dev->dev) old_class_name = make_class_name(class_dev->class->name, &class_dev->kobj); +#endif strlcpy(class_dev->class_id, new_name, KOBJ_NAME_LEN); error = kobject_rename(&class_dev->kobj, new_name); +#ifdef CONFIG_SYSFS_DEPRECATED if (class_dev->dev) { new_class_name = make_class_name(class_dev->class->name, &class_dev->kobj); @@ -819,6 +865,7 @@ int class_device_rename(struct class_device *class_dev, char *new_name) new_class_name); sysfs_remove_link(&class_dev->dev->kobj, old_class_name); } +#endif class_device_put(class_dev); kfree(old_class_name); @@ -893,23 +940,6 @@ void class_interface_unregister(struct class_interface *class_intf) class_put(parent); } -int virtual_device_parent(struct device *dev) -{ - if (!dev->class) - return -ENODEV; - - if (!dev->class->virtual_dir) { - static struct kobject *virtual_dir = NULL; - - if (!virtual_dir) - virtual_dir = kobject_add_dir(&devices_subsys.kset.kobj, "virtual"); - dev->class->virtual_dir = kobject_add_dir(virtual_dir, dev->class->name); - } - - dev->kobj.parent = dev->class->virtual_dir; - return 0; -} - int __init classes_init(void) { int retval; diff --git a/drivers/base/core.c b/drivers/base/core.c index 68ad11af22b..e4b530ef757 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -17,6 +17,7 @@ #include <linux/slab.h> #include <linux/string.h> #include <linux/kdev_t.h> +#include <linux/notifier.h> #include <asm/semaphore.h> @@ -153,20 +154,24 @@ static int dev_uevent(struct kset *kset, struct kobject *kobj, char **envp, "MINOR=%u", MINOR(dev->devt)); } +#ifdef CONFIG_SYSFS_DEPRECATED /* add bus name (same as SUBSYSTEM, deprecated) */ if (dev->bus) add_uevent_var(envp, num_envp, &i, buffer, buffer_size, &length, "PHYSDEVBUS=%s", dev->bus->name); +#endif /* add driver name (PHYSDEV* values are deprecated)*/ if (dev->driver) { add_uevent_var(envp, num_envp, &i, buffer, buffer_size, &length, "DRIVER=%s", dev->driver->name); +#ifdef CONFIG_SYSFS_DEPRECATED add_uevent_var(envp, num_envp, &i, buffer, buffer_size, &length, "PHYSDEVDRIVER=%s", dev->driver->name); +#endif } /* terminate, set to next free slot, shrink available space */ @@ -383,6 +388,52 @@ void device_initialize(struct device *dev) device_init_wakeup(dev, 0); } +#ifdef CONFIG_SYSFS_DEPRECATED +static int setup_parent(struct device *dev, struct device *parent) +{ + /* Set the parent to the class, not the parent device */ + /* this keeps sysfs from having a symlink to make old udevs happy */ + if (dev->class) + dev->kobj.parent = &dev->class->subsys.kset.kobj; + else if (parent) + dev->kobj.parent = &parent->kobj; + + return 0; +} +#else +static int virtual_device_parent(struct device *dev) +{ + if (!dev->class) + return -ENODEV; + + if (!dev->class->virtual_dir) { + static struct kobject *virtual_dir = NULL; + + if (!virtual_dir) + virtual_dir = kobject_add_dir(&devices_subsys.kset.kobj, "virtual"); + dev->class->virtual_dir = kobject_add_dir(virtual_dir, dev->class->name); + } + + dev->kobj.parent = dev->class->virtual_dir; + return 0; +} + +static int setup_parent(struct device *dev, struct device *parent) +{ + int error; + + /* if this is a class device, and has no parent, create one */ + if ((dev->class) && (parent == NULL)) { + error = virtual_device_parent(dev); + if (error) + return error; + } else if (parent) + dev->kobj.parent = &parent->kobj; + + return 0; +} +#endif + /** * device_add - add device to device hierarchy. * @dev: device. @@ -405,29 +456,29 @@ int device_add(struct device *dev) if (!dev || !strlen(dev->bus_id)) goto Error; - /* if this is a class device, and has no parent, create one */ - if ((dev->class) && (dev->parent == NULL)) { - error = virtual_device_parent(dev); - if (error) - goto Error; - } + pr_debug("DEV: registering device: ID = '%s'\n", dev->bus_id); parent = get_device(dev->parent); - pr_debug("DEV: registering device: ID = '%s'\n", dev->bus_id); + error = setup_parent(dev, parent); + if (error) + goto Error; /* first, register with generic layer. */ kobject_set_name(&dev->kobj, "%s", dev->bus_id); - if (parent) - dev->kobj.parent = &parent->kobj; - - if ((error = kobject_add(&dev->kobj))) + error = kobject_add(&dev->kobj); + if (error) goto Error; /* notify platform of device entry */ if (platform_notify) platform_notify(dev); + /* notify clients of device entry (new way) */ + if (dev->bus) + blocking_notifier_call_chain(&dev->bus->bus_notifier, + BUS_NOTIFY_ADD_DEVICE, dev); + dev->uevent_attr.attr.name = "uevent"; dev->uevent_attr.attr.mode = S_IWUSR; if (dev->driver) @@ -461,13 +512,18 @@ int device_add(struct device *dev) if (dev->class) { sysfs_create_link(&dev->kobj, &dev->class->subsys.kset.kobj, "subsystem"); - sysfs_create_link(&dev->class->subsys.kset.kobj, &dev->kobj, - dev->bus_id); + /* If this is not a "fake" compatible device, then create the + * symlink from the class to the device. */ + if (dev->kobj.parent != &dev->class->subsys.kset.kobj) + sysfs_create_link(&dev->class->subsys.kset.kobj, + &dev->kobj, dev->bus_id); +#ifdef CONFIG_SYSFS_DEPRECATED if (parent) { sysfs_create_link(&dev->kobj, &dev->parent->kobj, "device"); class_name = make_class_name(dev->class->name, &dev->kobj); sysfs_create_link(&dev->parent->kobj, &dev->kobj, class_name); } +#endif } if ((error = device_add_attrs(dev))) @@ -504,6 +560,9 @@ int device_add(struct device *dev) BusError: device_pm_remove(dev); PMError: + if (dev->bus) + blocking_notifier_call_chain(&dev->bus->bus_notifier, + BUS_NOTIFY_DEL_DEVICE, dev); device_remove_groups(dev); GroupError: device_remove_attrs(dev); @@ -586,22 +645,31 @@ void put_device(struct device * dev) void device_del(struct device * dev) { struct device * parent = dev->parent; - char *class_name = NULL; struct class_interface *class_intf; if (parent) klist_del(&dev->knode_parent); - if (dev->devt_attr) + if (dev->devt_attr) { device_remove_file(dev, dev->devt_attr); + kfree(dev->devt_attr); + } if (dev->class) { sysfs_remove_link(&dev->kobj, "subsystem"); - sysfs_remove_link(&dev->class->subsys.kset.kobj, dev->bus_id); - class_name = make_class_name(dev->class->name, &dev->kobj); + /* If this is not a "fake" compatible device, remove the + * symlink from the class to the device. */ + if (dev->kobj.parent != &dev->class->subsys.kset.kobj) + sysfs_remove_link(&dev->class->subsys.kset.kobj, + dev->bus_id); +#ifdef CONFIG_SYSFS_DEPRECATED if (parent) { - sysfs_remove_link(&dev->kobj, "device"); + char *class_name = make_class_name(dev->class->name, + &dev->kobj); sysfs_remove_link(&dev->parent->kobj, class_name); + kfree(class_name); + sysfs_remove_link(&dev->kobj, "device"); } - kfree(class_name); +#endif + down(&dev->class->sem); /* notify any interfaces that the device is now gone */ list_for_each_entry(class_intf, &dev->class->interfaces, node) @@ -614,13 +682,16 @@ void device_del(struct device * dev) device_remove_file(dev, &dev->uevent_attr); device_remove_groups(dev); device_remove_attrs(dev); + bus_remove_device(dev); /* Notify the platform of the removal, in case they * need to do anything... */ if (platform_notify_remove) platform_notify_remove(dev); - bus_remove_device(dev); + if (dev->bus) + blocking_notifier_call_chain(&dev->bus->bus_notifier, + BUS_NOTIFY_DEL_DEVICE, dev); device_pm_remove(dev); kobject_uevent(&dev->kobj, KOBJ_REMOVE); kobject_del(&dev->kobj); @@ -679,12 +750,45 @@ int device_for_each_child(struct device * parent, void * data, return error; } +/** + * device_find_child - device iterator for locating a particular device. + * @parent: parent struct device + * @data: Data to pass to match function + * @match: Callback function to check device + * + * This is similar to the device_for_each_child() function above, but it + * returns a reference to a device that is 'found' for later use, as + * determined by the @match callback. + * + * The callback should return 0 if the device doesn't match and non-zero + * if it does. If the callback returns non-zero and a reference to the + * current device can be obtained, this function will return to the caller + * and not iterate over any more devices. + */ +struct device * device_find_child(struct device *parent, void *data, + int (*match)(struct device *, void *)) +{ + struct klist_iter i; + struct device *child; + + if (!parent) + return NULL; + + klist_iter_init(&parent->klist_children, &i); + while ((child = next_device(&i))) + if (match(child, data) && get_device(child)) + break; + klist_iter_exit(&i); + return child; +} + int __init devices_init(void) { return subsystem_register(&devices_subsys); } EXPORT_SYMBOL_GPL(device_for_each_child); +EXPORT_SYMBOL_GPL(device_find_child); EXPORT_SYMBOL_GPL(device_initialize); EXPORT_SYMBOL_GPL(device_add); @@ -807,8 +911,10 @@ int device_rename(struct device *dev, char *new_name) pr_debug("DEVICE: renaming '%s' to '%s'\n", dev->bus_id, new_name); +#ifdef CONFIG_SYSFS_DEPRECATED if ((dev->class) && (dev->parent)) old_class_name = make_class_name(dev->class->name, &dev->kobj); +#endif if (dev->class) { old_symlink_name = kmalloc(BUS_ID_SIZE, GFP_KERNEL); @@ -823,6 +929,7 @@ int device_rename(struct device *dev, char *new_name) error = kobject_rename(&dev->kobj, new_name); +#ifdef CONFIG_SYSFS_DEPRECATED if (old_class_name) { new_class_name = make_class_name(dev->class->name, &dev->kobj); if (new_class_name) { @@ -831,6 +938,8 @@ int device_rename(struct device *dev, char *new_name) sysfs_remove_link(&dev->parent->kobj, old_class_name); } } +#endif + if (dev->class) { sysfs_remove_link(&dev->class->subsys.kset.kobj, old_symlink_name); @@ -846,3 +955,95 @@ int device_rename(struct device *dev, char *new_name) return error; } + + +static int device_move_class_links(struct device *dev, + struct device *old_parent, + struct device *new_parent) +{ +#ifdef CONFIG_SYSFS_DEPRECATED + int error; + char *class_name; + + class_name = make_class_name(dev->class->name, &dev->kobj); + if (!class_name) { + error = PTR_ERR(class_name); + class_name = NULL; + goto out; + } + if (old_parent) { + sysfs_remove_link(&dev->kobj, "device"); + sysfs_remove_link(&old_parent->kobj, class_name); + } + error = sysfs_create_link(&dev->kobj, &new_parent->kobj, "device"); + if (error) + goto out; + error = sysfs_create_link(&new_parent->kobj, &dev->kobj, class_name); + if (error) + sysfs_remove_link(&dev->kobj, "device"); +out: + kfree(class_name); + return error; +#else + return 0; +#endif +} + +/** + * device_move - moves a device to a new parent + * @dev: the pointer to the struct device to be moved + * @new_parent: the new parent of the device + */ +int device_move(struct device *dev, struct device *new_parent) +{ + int error; + struct device *old_parent; + + dev = get_device(dev); + if (!dev) + return -EINVAL; + + if (!device_is_registered(dev)) { + error = -EINVAL; + goto out; + } + new_parent = get_device(new_parent); + if (!new_parent) { + error = -EINVAL; + goto out; + } + pr_debug("DEVICE: moving '%s' to '%s'\n", dev->bus_id, + new_parent->bus_id); + error = kobject_move(&dev->kobj, &new_parent->kobj); + if (error) { + put_device(new_parent); + goto out; + } + old_parent = dev->parent; + dev->parent = new_parent; + if (old_parent) + klist_remove(&dev->knode_parent); + klist_add_tail(&dev->knode_parent, &new_parent->klist_children); + if (!dev->class) + goto out_put; + error = device_move_class_links(dev, old_parent, new_parent); + if (error) { + /* We ignore errors on cleanup since we're hosed anyway... */ + device_move_class_links(dev, new_parent, old_parent); + if (!kobject_move(&dev->kobj, &old_parent->kobj)) { + klist_remove(&dev->knode_parent); + if (old_parent) + klist_add_tail(&dev->knode_parent, + &old_parent->klist_children); + } + put_device(new_parent); + goto out; + } +out_put: + put_device(old_parent); +out: + put_device(dev); + return error; +} + +EXPORT_SYMBOL_GPL(device_move); diff --git a/drivers/base/dd.c b/drivers/base/dd.c index c5d6bb4290a..510e7884975 100644 --- a/drivers/base/dd.c +++ b/drivers/base/dd.c @@ -26,33 +26,28 @@ #define to_drv(node) container_of(node, struct device_driver, kobj.entry) -/** - * device_bind_driver - bind a driver to one device. - * @dev: device. - * - * Allow manual attachment of a driver to a device. - * Caller must have already set @dev->driver. - * - * Note that this does not modify the bus reference count - * nor take the bus's rwsem. Please verify those are accounted - * for before calling this. (It is ok to call with no other effort - * from a driver's probe() method.) - * - * This function must be called with @dev->sem held. - */ -int device_bind_driver(struct device *dev) +static void driver_bound(struct device *dev) { - int ret; - if (klist_node_attached(&dev->knode_driver)) { printk(KERN_WARNING "%s: device %s already bound\n", __FUNCTION__, kobject_name(&dev->kobj)); - return 0; + return; } pr_debug("bound device '%s' to driver '%s'\n", dev->bus_id, dev->driver->name); + + if (dev->bus) + blocking_notifier_call_chain(&dev->bus->bus_notifier, + BUS_NOTIFY_BOUND_DRIVER, dev); + klist_add_tail(&dev->knode_driver, &dev->driver->klist_devices); +} + +static int driver_sysfs_add(struct device *dev) +{ + int ret; + ret = sysfs_create_link(&dev->driver->kobj, &dev->kobj, kobject_name(&dev->kobj)); if (ret == 0) { @@ -65,6 +60,36 @@ int device_bind_driver(struct device *dev) return ret; } +static void driver_sysfs_remove(struct device *dev) +{ + struct device_driver *drv = dev->driver; + + if (drv) { + sysfs_remove_link(&drv->kobj, kobject_name(&dev->kobj)); + sysfs_remove_link(&dev->kobj, "driver"); + } +} + +/** + * device_bind_driver - bind a driver to one device. + * @dev: device. + * + * Allow manual attachment of a driver to a device. + * Caller must have already set @dev->driver. + * + * Note that this does not modify the bus reference count + * nor take the bus's rwsem. Please verify those are accounted + * for before calling this. (It is ok to call with no other effort + * from a driver's probe() method.) + * + * This function must be called with @dev->sem held. + */ +int device_bind_driver(struct device *dev) +{ + driver_bound(dev); + return driver_sysfs_add(dev); +} + struct stupid_thread_structure { struct device_driver *drv; struct device *dev; @@ -85,30 +110,32 @@ static int really_probe(void *void_data) drv->bus->name, drv->name, dev->bus_id); dev->driver = drv; + if (driver_sysfs_add(dev)) { + printk(KERN_ERR "%s: driver_sysfs_add(%s) failed\n", + __FUNCTION__, dev->bus_id); + goto probe_failed; + } + if (dev->bus->probe) { ret = dev->bus->probe(dev); - if (ret) { - dev->driver = NULL; + if (ret) goto probe_failed; - } } else if (drv->probe) { ret = drv->probe(dev); - if (ret) { - dev->driver = NULL; + if (ret) goto probe_failed; - } - } - if (device_bind_driver(dev)) { - printk(KERN_ERR "%s: device_bind_driver(%s) failed\n", - __FUNCTION__, dev->bus_id); - /* How does undo a ->probe? We're screwed. */ } + + driver_bound(dev); ret = 1; pr_debug("%s: Bound Device %s to Driver %s\n", drv->bus->name, dev->bus_id, drv->name); goto done; probe_failed: + driver_sysfs_remove(dev); + dev->driver = NULL; + if (ret == -ENODEV || ret == -ENXIO) { /* Driver matched, but didn't support device * or device not found. @@ -284,10 +311,15 @@ static void __device_release_driver(struct device * dev) drv = dev->driver; if (drv) { get_driver(drv); - sysfs_remove_link(&drv->kobj, kobject_name(&dev->kobj)); + driver_sysfs_remove(dev); sysfs_remove_link(&dev->kobj, "driver"); klist_remove(&dev->knode_driver); + if (dev->bus) + blocking_notifier_call_chain(&dev->bus->bus_notifier, + BUS_NOTIFY_UNBIND_DRIVER, + dev); + if (dev->bus && dev->bus->remove) dev->bus->remove(dev); else if (drv->remove) diff --git a/drivers/base/firmware_class.c b/drivers/base/firmware_class.c index 14615694ae9..4bad2870c48 100644 --- a/drivers/base/firmware_class.c +++ b/drivers/base/firmware_class.c @@ -21,6 +21,8 @@ #include <linux/firmware.h> #include "base.h" +#define to_dev(obj) container_of(obj, struct device, kobj) + MODULE_AUTHOR("Manuel Estrada Sainz <ranty@debian.org>"); MODULE_DESCRIPTION("Multi purpose firmware loading support"); MODULE_LICENSE("GPL"); @@ -86,12 +88,12 @@ firmware_timeout_store(struct class *class, const char *buf, size_t count) static CLASS_ATTR(timeout, 0644, firmware_timeout_show, firmware_timeout_store); -static void fw_class_dev_release(struct class_device *class_dev); +static void fw_dev_release(struct device *dev); -static int firmware_class_uevent(struct class_device *class_dev, char **envp, - int num_envp, char *buffer, int buffer_size) +static int firmware_uevent(struct device *dev, char **envp, int num_envp, + char *buffer, int buffer_size) { - struct firmware_priv *fw_priv = class_get_devdata(class_dev); + struct firmware_priv *fw_priv = dev_get_drvdata(dev); int i = 0, len = 0; if (!test_bit(FW_STATUS_READY, &fw_priv->status)) @@ -110,21 +112,21 @@ static int firmware_class_uevent(struct class_device *class_dev, char **envp, static struct class firmware_class = { .name = "firmware", - .uevent = firmware_class_uevent, - .release = fw_class_dev_release, + .dev_uevent = firmware_uevent, + .dev_release = fw_dev_release, }; -static ssize_t -firmware_loading_show(struct class_device *class_dev, char *buf) +static ssize_t firmware_loading_show(struct device *dev, + struct device_attribute *attr, char *buf) { - struct firmware_priv *fw_priv = class_get_devdata(class_dev); + struct firmware_priv *fw_priv = dev_get_drvdata(dev); int loading = test_bit(FW_STATUS_LOADING, &fw_priv->status); return sprintf(buf, "%d\n", loading); } /** * firmware_loading_store - set value in the 'loading' control file - * @class_dev: class_device pointer + * @dev: device pointer * @buf: buffer to scan for loading control value * @count: number of bytes in @buf * @@ -134,11 +136,11 @@ firmware_loading_show(struct class_device *class_dev, char *buf) * 0: Conclude the load and hand the data to the driver code. * -1: Conclude the load with an error and discard any written data. **/ -static ssize_t -firmware_loading_store(struct class_device *class_dev, - const char *buf, size_t count) +static ssize_t firmware_loading_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) { - struct firmware_priv *fw_priv = class_get_devdata(class_dev); + struct firmware_priv *fw_priv = dev_get_drvdata(dev); int loading = simple_strtol(buf, NULL, 10); switch (loading) { @@ -174,15 +176,14 @@ firmware_loading_store(struct class_device *class_dev, return count; } -static CLASS_DEVICE_ATTR(loading, 0644, - firmware_loading_show, firmware_loading_store); +static DEVICE_ATTR(loading, 0644, firmware_loading_show, firmware_loading_store); static ssize_t firmware_data_read(struct kobject *kobj, char *buffer, loff_t offset, size_t count) { - struct class_device *class_dev = to_class_dev(kobj); - struct firmware_priv *fw_priv = class_get_devdata(class_dev); + struct device *dev = to_dev(kobj); + struct firmware_priv *fw_priv = dev_get_drvdata(dev); struct firmware *fw; ssize_t ret_count = count; @@ -234,7 +235,7 @@ fw_realloc_buffer(struct firmware_priv *fw_priv, int min_size) /** * firmware_data_write - write method for firmware - * @kobj: kobject for the class_device + * @kobj: kobject for the device * @buffer: buffer being written * @offset: buffer offset for write in total data store area * @count: buffer size @@ -246,8 +247,8 @@ static ssize_t firmware_data_write(struct kobject *kobj, char *buffer, loff_t offset, size_t count) { - struct class_device *class_dev = to_class_dev(kobj); - struct firmware_priv *fw_priv = class_get_devdata(class_dev); + struct device *dev = to_dev(kobj); + struct firmware_priv *fw_priv = dev_get_drvdata(dev); struct firmware *fw; ssize_t retval; @@ -280,13 +281,12 @@ static struct bin_attribute firmware_attr_data_tmpl = { .write = firmware_data_write, }; -static void -fw_class_dev_release(struct class_device *class_dev) +static void fw_dev_release(struct device *dev) { - struct firmware_priv *fw_priv = class_get_devdata(class_dev); + struct firmware_priv *fw_priv = dev_get_drvdata(dev); kfree(fw_priv); - kfree(class_dev); + kfree(dev); module_put(THIS_MODULE); } @@ -298,26 +298,23 @@ firmware_class_timeout(u_long data) fw_load_abort(fw_priv); } -static inline void -fw_setup_class_device_id(struct class_device *class_dev, struct device *dev) +static inline void fw_setup_device_id(struct device *f_dev, struct device *dev) { /* XXX warning we should watch out for name collisions */ - strlcpy(class_dev->class_id, dev->bus_id, BUS_ID_SIZE); + strlcpy(f_dev->bus_id, dev->bus_id, BUS_ID_SIZE); } -static int -fw_register_class_device(struct class_device **class_dev_p, - const char *fw_name, struct device *device) +static int fw_register_device(struct device **dev_p, const char *fw_name, + struct device *device) { int retval; struct firmware_priv *fw_priv = kzalloc(sizeof(*fw_priv), GFP_KERNEL); - struct class_device *class_dev = kzalloc(sizeof(*class_dev), - GFP_KERNEL); + struct device *f_dev = kzalloc(sizeof(*f_dev), GFP_KERNEL); - *class_dev_p = NULL; + *dev_p = NULL; - if (!fw_priv || !class_dev) { + if (!fw_priv || !f_dev) { printk(KERN_ERR "%s: kmalloc failed\n", __FUNCTION__); retval = -ENOMEM; goto error_kfree; @@ -331,55 +328,54 @@ fw_register_class_device(struct class_device **class_dev_p, fw_priv->timeout.data = (u_long) fw_priv; init_timer(&fw_priv->timeout); - fw_setup_class_device_id(class_dev, device); - class_dev->dev = device; - class_dev->class = &firmware_class; - class_set_devdata(class_dev, fw_priv); - retval = class_device_register(class_dev); + fw_setup_device_id(f_dev, device); + f_dev->parent = device; + f_dev->class = &firmware_class; + dev_set_drvdata(f_dev, fw_priv); + retval = device_register(f_dev); if (retval) { - printk(KERN_ERR "%s: class_device_register failed\n", + printk(KERN_ERR "%s: device_register failed\n", __FUNCTION__); goto error_kfree; } - *class_dev_p = class_dev; + *dev_p = f_dev; return 0; error_kfree: kfree(fw_priv); - kfree(class_dev); + kfree(f_dev); return retval; } -static int -fw_setup_class_device(struct firmware *fw, struct class_device **class_dev_p, - const char *fw_name, struct device *device, int uevent) +static int fw_setup_device(struct firmware *fw, struct device **dev_p, + const char *fw_name, struct device *device, + int uevent) { - struct class_device *class_dev; + struct device *f_dev; struct firmware_priv *fw_priv; int retval; - *class_dev_p = NULL; - retval = fw_register_class_device(&class_dev, fw_name, device); + *dev_p = NULL; + retval = fw_register_device(&f_dev, fw_name, device); if (retval) goto out; /* Need to pin this module until class device is destroyed */ __module_get(THIS_MODULE); - fw_priv = class_get_devdata(class_dev); + fw_priv = dev_get_drvdata(f_dev); fw_priv->fw = fw; - retval = sysfs_create_bin_file(&class_dev->kobj, &fw_priv->attr_data); + retval = sysfs_create_bin_file(&f_dev->kobj, &fw_priv->attr_data); if (retval) { printk(KERN_ERR "%s: sysfs_create_bin_file failed\n", __FUNCTION__); goto error_unreg; } - retval = class_device_create_file(class_dev, - &class_device_attr_loading); + retval = device_create_file(f_dev, &dev_attr_loading); if (retval) { - printk(KERN_ERR "%s: class_device_create_file failed\n", + printk(KERN_ERR "%s: device_create_file failed\n", __FUNCTION__); goto error_unreg; } @@ -388,11 +384,11 @@ fw_setup_class_device(struct firmware *fw, struct class_device **class_dev_p, set_bit(FW_STATUS_READY, &fw_priv->status); else set_bit(FW_STATUS_READY_NOHOTPLUG, &fw_priv->status); - *class_dev_p = class_dev; + *dev_p = f_dev; goto out; error_unreg: - class_device_unregister(class_dev); + device_unregister(f_dev); out: return retval; } @@ -401,7 +397,7 @@ static int _request_firmware(const struct firmware **firmware_p, const char *name, struct device *device, int uevent) { - struct class_device *class_dev; + struct device *f_dev; struct firmware_priv *fw_priv; struct firmware *firmware; int retval; @@ -417,12 +413,11 @@ _request_firmware(const struct firmware **firmware_p, const char *name, goto out; } - retval = fw_setup_class_device(firmware, &class_dev, name, device, - uevent); + retval = fw_setup_device(firmware, &f_dev, name, device, uevent); if (retval) goto error_kfree_fw; - fw_priv = class_get_devdata(class_dev); + fw_priv = dev_get_drvdata(f_dev); if (uevent) { if (loading_timeout > 0) { @@ -430,7 +425,7 @@ _request_firmware(const struct firmware **firmware_p, const char *name, add_timer(&fw_priv->timeout); } - kobject_uevent(&class_dev->kobj, KOBJ_ADD); + kobject_uevent(&f_dev->kobj, KOBJ_ADD); wait_for_completion(&fw_priv->completion); set_bit(FW_STATUS_DONE, &fw_priv->status); del_timer_sync(&fw_priv->timeout); @@ -445,7 +440,7 @@ _request_firmware(const struct firmware **firmware_p, const char *name, } fw_priv->fw = NULL; mutex_unlock(&fw_lock); - class_device_unregister(class_dev); + device_unregister(f_dev); goto out; error_kfree_fw: diff --git a/drivers/base/platform.c b/drivers/base/platform.c index 940ce41f188..d1df4a08792 100644 --- a/drivers/base/platform.c +++ b/drivers/base/platform.c @@ -388,6 +388,11 @@ static int platform_drv_probe(struct device *_dev) return drv->probe(dev); } +static int platform_drv_probe_fail(struct device *_dev) +{ + return -ENXIO; +} + static int platform_drv_remove(struct device *_dev) { struct platform_driver *drv = to_platform_driver(_dev->driver); @@ -451,6 +456,49 @@ void platform_driver_unregister(struct platform_driver *drv) } EXPORT_SYMBOL_GPL(platform_driver_unregister); +/** + * platform_driver_probe - register driver for non-hotpluggable device + * @drv: platform driver structure + * @probe: the driver probe routine, probably from an __init section + * + * Use this instead of platform_driver_register() when you know the device + * is not hotpluggable and has already been registered, and you want to + * remove its run-once probe() infrastructure from memory after the driver + * has bound to the device. + * + * One typical use for this would be with drivers for controllers integrated + * into system-on-chip processors, where the controller devices have been + * configured as part of board setup. + * + * Returns zero if the driver registered and bound to a device, else returns + * a negative error code and with the driver not registered. + */ +int platform_driver_probe(struct platform_driver *drv, + int (*probe)(struct platform_device *)) +{ + int retval, code; + + /* temporary section violation during probe() */ + drv->probe = probe; + retval = code = platform_driver_register(drv); + + /* Fixup that section violation, being paranoid about code scanning + * the list of drivers in order to probe new devices. Check to see + * if the probe was successful, and make sure any forced probes of + * new devices fail. + */ + spin_lock(&platform_bus_type.klist_drivers.k_lock); + drv->probe = NULL; + if (code == 0 && list_empty(&drv->driver.klist_devices.k_list)) + retval = -ENODEV; + drv->driver.probe = platform_drv_probe_fail; + spin_unlock(&platform_bus_type.klist_drivers.k_lock); + + if (code != retval) + platform_driver_unregister(drv); + return retval; +} +EXPORT_SYMBOL_GPL(platform_driver_probe); /* modalias support enables more hands-off userspace setup: * (a) environment variable lets new-style hotplug events work once system is diff --git a/drivers/base/topology.c b/drivers/base/topology.c index 28dccb730af..3d12b85b096 100644 --- a/drivers/base/topology.c +++ b/drivers/base/topology.c @@ -94,54 +94,63 @@ static struct attribute_group topology_attr_group = { .name = "topology" }; +static cpumask_t topology_dev_map = CPU_MASK_NONE; + /* Add/Remove cpu_topology interface for CPU device */ -static int __cpuinit topology_add_dev(struct sys_device * sys_dev) +static int __cpuinit topology_add_dev(unsigned int cpu) { - return sysfs_create_group(&sys_dev->kobj, &topology_attr_group); + int rc; + struct sys_device *sys_dev = get_cpu_sysdev(cpu); + + rc = sysfs_create_group(&sys_dev->kobj, &topology_attr_group); + if (!rc) + cpu_set(cpu, topology_dev_map); + return rc; } -static int __cpuinit topology_remove_dev(struct sys_device * sys_dev) +#ifdef CONFIG_HOTPLUG_CPU +static void __cpuinit topology_remove_dev(unsigned int cpu) { + struct sys_device *sys_dev = get_cpu_sysdev(cpu); + + if (!cpu_isset(cpu, topology_dev_map)) + return; + cpu_clear(cpu, topology_dev_map); sysfs_remove_group(&sys_dev->kobj, &topology_attr_group); - return 0; } static int __cpuinit topology_cpu_callback(struct notifier_block *nfb, - unsigned long action, void *hcpu) + unsigned long action, void *hcpu) { unsigned int cpu = (unsigned long)hcpu; - struct sys_device *sys_dev; + int rc = 0; - sys_dev = get_cpu_sysdev(cpu); switch (action) { - case CPU_ONLINE: - topology_add_dev(sys_dev); + case CPU_UP_PREPARE: + rc = topology_add_dev(cpu); break; + case CPU_UP_CANCELED: case CPU_DEAD: - topology_remove_dev(sys_dev); + topology_remove_dev(cpu); break; } - return NOTIFY_OK; + return rc ? NOTIFY_BAD : NOTIFY_OK; } - -static struct notifier_block __cpuinitdata topology_cpu_notifier = -{ - .notifier_call = topology_cpu_callback, -}; +#endif static int __cpuinit topology_sysfs_init(void) { - int i; + int cpu; + int rc; - for_each_online_cpu(i) { - topology_cpu_callback(&topology_cpu_notifier, CPU_ONLINE, - (void *)(long)i); + for_each_online_cpu(cpu) { + rc = topology_add_dev(cpu); + if (rc) + return rc; } - - register_hotcpu_notifier(&topology_cpu_notifier); + hotcpu_notifier(topology_cpu_callback, 0); return 0; } device_initcall(topology_sysfs_init); - diff --git a/drivers/cdrom/cdrom.c b/drivers/cdrom/cdrom.c index 7ea0f48f8fa..2df5cf4ec74 100644 --- a/drivers/cdrom/cdrom.c +++ b/drivers/cdrom/cdrom.c @@ -2133,16 +2133,14 @@ static int cdrom_read_cdda_bpc(struct cdrom_device_info *cdi, __u8 __user *ubuf, rq->timeout = 60 * HZ; bio = rq->bio; - if (rq->bio) - blk_queue_bounce(q, &rq->bio); - if (blk_execute_rq(q, cdi->disk, rq, 0)) { struct request_sense *s = rq->sense; ret = -EIO; cdi->last_sense = s->sense_key; } - if (blk_rq_unmap_user(bio, len)) + rq->bio = bio; + if (blk_rq_unmap_user(rq)) ret = -EFAULT; if (ret) diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index 2af12fc4511..24f922f1278 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -855,39 +855,6 @@ config TANBAC_TB0219 depends TANBAC_TB022X select GPIO_VR41XX -menu "Ftape, the floppy tape device driver" - -config FTAPE - tristate "Ftape (QIC-80/Travan) support" - depends on BROKEN_ON_SMP && (ALPHA || X86) - ---help--- - If you have a tape drive that is connected to your floppy - controller, say Y here. - - Some tape drives (like the Seagate "Tape Store 3200" or the Iomega - "Ditto 3200" or the Exabyte "Eagle TR-3") come with a "high speed" - controller of their own. These drives (and their companion - controllers) are also supported if you say Y here. - - If you have a special controller (such as the CMS FC-10, FC-20, - Mountain Mach-II, or any controller that is based on the Intel 82078 - FDC like the high speed controllers by Seagate and Exabyte and - Iomega's "Ditto Dash") you must configure it by selecting the - appropriate entries from the "Floppy tape controllers" sub-menu - below and possibly modify the default values for the IRQ and DMA - channel and the IO base in ftape's configuration menu. - - If you want to use your floppy tape drive on a PCI-bus based system, - please read the file <file:drivers/char/ftape/README.PCI>. - - The ftape kernel driver is also available as a runtime loadable - module. To compile this driver as a module, choose M here: the - module will be called ftape. - -source "drivers/char/ftape/Kconfig" - -endmenu - source "drivers/char/agp/Kconfig" source "drivers/char/drm/Kconfig" @@ -994,7 +961,7 @@ config HPET help If you say Y here, you will have a miscdevice named "/dev/hpet/". Each open selects one of the timers supported by the HPET. The timers are - non-periodioc and/or periodic. + non-periodic and/or periodic. config HPET_RTC_IRQ bool "HPET Control RTC IRQ" if !HPET_EMULATE_RTC diff --git a/drivers/char/Makefile b/drivers/char/Makefile index 777cad04509..b1fcdab9094 100644 --- a/drivers/char/Makefile +++ b/drivers/char/Makefile @@ -78,7 +78,6 @@ obj-$(CONFIG_TOSHIBA) += toshiba.o obj-$(CONFIG_I8K) += i8k.o obj-$(CONFIG_DS1620) += ds1620.o obj-$(CONFIG_HW_RANDOM) += hw_random/ -obj-$(CONFIG_FTAPE) += ftape/ obj-$(CONFIG_COBALT_LCD) += lcd.o obj-$(CONFIG_PPDEV) += ppdev.o obj-$(CONFIG_NWBUTTON) += nwbutton.o diff --git a/drivers/char/agp/generic.c b/drivers/char/agp/generic.c index c3920016168..5ff457b41ef 100644 --- a/drivers/char/agp/generic.c +++ b/drivers/char/agp/generic.c @@ -1054,7 +1054,7 @@ void *agp_generic_alloc_page(struct agp_bridge_data *bridge) { struct page * page; - page = alloc_page(GFP_KERNEL); + page = alloc_page(GFP_KERNEL | GFP_DMA32); if (page == NULL) return NULL; diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c index d1ede7db5a1..555b3a8ab49 100644 --- a/drivers/char/agp/intel-agp.c +++ b/drivers/char/agp/intel-agp.c @@ -169,7 +169,7 @@ static void *i8xx_alloc_pages(void) { struct page * page; - page = alloc_pages(GFP_KERNEL, 2); + page = alloc_pages(GFP_KERNEL | GFP_DMA32, 2); if (page == NULL) return NULL; @@ -387,11 +387,7 @@ static void intel_i830_init_gtt_entries(void) /* We obtain the size of the GTT, which is also stored (for some * reason) at the top of stolen memory. Then we add 4KB to that * for the video BIOS popup, which is also stored in there. */ - - if (IS_I965) - size = 512 + 4; - else - size = agp_bridge->driver->fetch_size() + 4; + size = agp_bridge->driver->fetch_size() + 4; if (agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82830_HB || agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82845G_HB) { @@ -805,6 +801,26 @@ static int intel_i915_create_gatt_table(struct agp_bridge_data *bridge) return 0; } + +/* + * The i965 supports 36-bit physical addresses, but to keep + * the format of the GTT the same, the bits that don't fit + * in a 32-bit word are shifted down to bits 4..7. + * + * Gcc is smart enough to notice that "(addr >> 28) & 0xf0" + * is always zero on 32-bit architectures, so no need to make + * this conditional. + */ +static unsigned long intel_i965_mask_memory(struct agp_bridge_data *bridge, + unsigned long addr, int type) +{ + /* Shift high bits down */ + addr |= (addr >> 28) & 0xf0; + + /* Type checking must be done elsewhere */ + return addr | bridge->driver->masks[type].mask; +} + static int intel_i965_fetch_size(void) { struct aper_size_info_fixed *values; @@ -832,7 +848,8 @@ static int intel_i965_fetch_size(void) agp_bridge->previous_size = agp_bridge->current_size = (void *)(values + offset); - return values[offset].size; + /* The i965 GTT is always sized as if it had a 512kB aperture size */ + return 512; } /* The intel i965 automatically initializes the agp aperture during POST. @@ -1584,7 +1601,7 @@ static struct agp_bridge_driver intel_i965_driver = { .fetch_size = intel_i965_fetch_size, .cleanup = intel_i915_cleanup, .tlb_flush = intel_i810_tlbflush, - .mask_memory = intel_i810_mask_memory, + .mask_memory = intel_i965_mask_memory, .masks = intel_i810_masks, .agp_enable = intel_i810_agp_enable, .cache_flush = global_cache_flush, diff --git a/drivers/char/ftape/Kconfig b/drivers/char/ftape/Kconfig deleted file mode 100644 index 0d65189a7ae..00000000000 --- a/drivers/char/ftape/Kconfig +++ /dev/null @@ -1,330 +0,0 @@ -# -# Ftape configuration -# -config ZFTAPE - tristate "Zftape, the VFS interface" - depends on FTAPE - ---help--- - Normally, you want to say Y or M. DON'T say N here or you - WON'T BE ABLE TO USE YOUR FLOPPY TAPE DRIVE. - - The ftape module itself no longer contains the routines necessary - to interface with the kernel VFS layer (i.e. to actually write data - to and read data from the tape drive). Instead the file system - interface (i.e. the hardware independent part of the driver) has - been moved to a separate module. - - To compile this driver as a module, choose M here: the - module will be called zftape. - - Regardless of whether you say Y or M here, an additional runtime - loadable module called `zft-compressor' which contains code to - support user transparent on-the-fly compression based on Ross - William's lzrw3 algorithm will be produced. If you have enabled the - kernel module loader (i.e. have said Y to "Kernel module loader - support", above) then `zft-compressor' will be loaded - automatically by zftape when needed. - - Despite its name, zftape does NOT use compression by default. - -config ZFT_DFLT_BLK_SZ - int "Default block size" - depends on ZFTAPE - default "10240" - ---help--- - If unsure leave this at its default value, i.e. 10240. Note that - you specify only the default block size here. The block size can be - changed at run time using the MTSETBLK tape operation with the - MTIOCTOP ioctl (i.e. with "mt -f /dev/qft0 setblk #BLKSZ" from the - shell command line). - - The probably most striking difference between zftape and previous - versions of ftape is the fact that all data must be written or read - in multiples of a fixed block size. The block size defaults to - 10240 which is what GNU tar uses. The values for the block size - should be either 1 or multiples of 1024 up to a maximum value of - 63488 (i.e. 62 K). If you specify `1' then zftape's builtin - compression will be disabled. - - Reasonable values are `10240' (GNU tar's default block size), - `5120' (afio's default block size), `32768' (default block size some - backup programs assume for SCSI tape drives) or `1' (no restriction - on block size, but disables builtin compression). - -comment "The compressor will be built as a module only!" - depends on FTAPE && ZFTAPE - -config ZFT_COMPRESSOR - tristate - depends on FTAPE!=n && ZFTAPE!=n - default m - -config FT_NR_BUFFERS - int "Number of ftape buffers (EXPERIMENTAL)" - depends on FTAPE && EXPERIMENTAL - default "3" - help - Please leave this at `3' unless you REALLY know what you are doing. - It is not necessary to change this value. Values below 3 make the - proper use of ftape impossible, values greater than 3 are a waste of - memory. You can change the amount of DMA memory used by ftape at - runtime with "mt -f /dev/qft0 setdrvbuffer #NUMBUFFERS". Each buffer - wastes 32 KB of memory. Please note that this memory cannot be - swapped out. - -config FT_PROC_FS - bool "Enable procfs status report (+2kb)" - depends on FTAPE && PROC_FS - ---help--- - Optional. Saying Y will result in creation of a directory - `/proc/ftape' under the /proc file system. The files can be viewed - with your favorite pager (i.e. use "more /proc/ftape/history" or - "less /proc/ftape/history" or simply "cat /proc/ftape/history"). The - file will contain some status information about the inserted - cartridge, the kernel driver, your tape drive, the floppy disk - controller and the error history for the most recent use of the - kernel driver. Saying Y will enlarge the size of the ftape driver - by approximately 2 KB. - - WARNING: When compiling ftape as a module (i.e. saying M to "Floppy - tape drive") it is dangerous to use ftape's /proc file system - interface. Accessing `/proc/ftape' while the module is unloaded will - result in a kernel Oops. This cannot be fixed from inside ftape. - -choice - prompt "Debugging output" - depends on FTAPE - default FT_NORMAL_DEBUG - -config FT_NORMAL_DEBUG - bool "Normal" - ---help--- - This option controls the amount of debugging output the ftape driver - is ABLE to produce; it does not increase or diminish the debugging - level itself. If unsure, leave this at its default setting, - i.e. choose "Normal". - - Ftape can print lots of debugging messages to the system console - resp. kernel log files. Reducing the amount of possible debugging - output reduces the size of the kernel module by some KB, so it might - be a good idea to use "None" for emergency boot floppies. - - If you want to save memory then the following strategy is - recommended: leave this option at its default setting "Normal" until - you know that the driver works as expected, afterwards reconfigure - the kernel, this time specifying "Reduced" or "None" and recompile - and install the kernel as usual. Note that choosing "Excessive" - debugging output does not increase the amount of debugging output - printed to the console but only makes it possible to produce - "Excessive" debugging output. - - Please read <file:Documentation/ftape.txt> for a short description - how to control the amount of debugging output. - -config FT_FULL_DEBUG - bool "Excessive" - help - Extremely verbose output for driver debugging purposes. - -config FT_NO_TRACE - bool "Reduced" - help - Reduced tape driver debugging output. - -config FT_NO_TRACE_AT_ALL - bool "None" - help - Suppress all debugging output from the tape drive. - -endchoice - -comment "Hardware configuration" - depends on FTAPE - -choice - prompt "Floppy tape controllers" - depends on FTAPE - default FT_STD_FDC - -config FT_STD_FDC - bool "Standard" - ---help--- - Only change this setting if you have a special controller. If you - didn't plug any add-on card into your computer system but just - plugged the floppy tape cable into the already existing floppy drive - controller then you don't want to change the default setting, - i.e. choose "Standard". - - Choose "MACH-2" if you have a Mountain Mach-2 controller. - Choose "FC-10/FC-20" if you have a Colorado FC-10 or FC-20 - controller. - Choose "Alt/82078" if you have another controller that is located at - an IO base address different from the standard floppy drive - controller's base address of `0x3f0', or uses an IRQ (interrupt) - channel different from `6', or a DMA channel different from - `2'. This is necessary for any controller card that is based on - Intel's 82078 FDC such as Seagate's, Exabyte's and Iomega's "high - speed" controllers. - - If you choose something other than "Standard" then please make - sure that the settings for the IO base address and the IRQ and DMA - channel in the configuration menus below are correct. Use the manual - of your tape drive to determine the correct settings! - - If you are already successfully using your tape drive with another - operating system then you definitely should use the same settings - for the IO base, the IRQ and DMA channel that have proven to work - with that other OS. - - Note that this menu lets you specify only the default setting for - the hardware setup. The hardware configuration can be changed at - boot time (when ftape is compiled into the kernel, i.e. if you - have said Y to "Floppy tape drive") or module load time (i.e. if you - have said M to "Floppy tape drive"). - - Please read also the file <file:Documentation/ftape.txt> which - contains a short description of the parameters that can be set at - boot or load time. If you want to use your floppy tape drive on a - PCI-bus based system, please read the file - <file:drivers/char/ftape/README.PCI>. - -config FT_MACH2 - bool "MACH-2" - -config FT_PROBE_FC10 - bool "FC-10/FC-20" - -config FT_ALT_FDC - bool "Alt/82078" - -endchoice - -comment "Consult the manuals of your tape drive for the correct settings!" - depends on FTAPE && !FT_STD_FDC - -config FT_FDC_BASE - hex "IO base of the floppy disk controller" - depends on FTAPE && !FT_STD_FDC - default "0" - ---help--- - You don't need to specify a value if the following default - settings for the base IO address are correct: - <<< MACH-2 : 0x1E0 >>> - <<< FC-10/FC-20: 0x180 >>> - <<< Secondary : 0x370 >>> - Secondary refers to a secondary FDC controller like the "high speed" - controllers delivered by Seagate or Exabyte or Iomega's Ditto Dash. - Please make sure that the setting for the IO base address - specified here is correct. USE THE MANUAL OF YOUR TAPE DRIVE OR - CONTROLLER CARD TO DETERMINE THE CORRECT SETTING. If you are already - successfully using the tape drive with another operating system then - you definitely should use the same settings for the IO base that has - proven to work with that other OS. - - Note that this menu lets you specify only the default setting for - the IO base. The hardware configuration can be changed at boot time - (when ftape is compiled into the kernel, i.e. if you specified Y to - "Floppy tape drive") or module load time (i.e. if you have said M to - "Floppy tape drive"). - - Please read also the file <file:Documentation/ftape.txt> which - contains a short description of the parameters that can be set at - boot or load time. - -config FT_FDC_IRQ - int "IRQ channel of the floppy disk controller" - depends on FTAPE && !FT_STD_FDC - default "0" - ---help--- - You don't need to specify a value if the following default - settings for the interrupt channel are correct: - <<< MACH-2 : 6 >>> - <<< FC-10/FC-20: 9 >>> - <<< Secondary : 6 >>> - Secondary refers to secondary a FDC controller like the "high speed" - controllers delivered by Seagate or Exabyte or Iomega's Ditto Dash. - Please make sure that the setting for the IO base address - specified here is correct. USE THE MANUAL OF YOUR TAPE DRIVE OR - CONTROLLER CARD TO DETERMINE THE CORRECT SETTING. If you are already - successfully using the tape drive with another operating system then - you definitely should use the same settings for the IO base that has - proven to work with that other OS. - - Note that this menu lets you specify only the default setting for - the IRQ channel. The hardware configuration can be changed at boot - time (when ftape is compiled into the kernel, i.e. if you said Y to - "Floppy tape drive") or module load time (i.e. if you said M to - "Floppy tape drive"). - - Please read also the file <file:Documentation/ftape.txt> which - contains a short description of the parameters that can be set at - boot or load time. - -config FT_FDC_DMA - int "DMA channel of the floppy disk controller" - depends on FTAPE && !FT_STD_FDC - default "0" - ---help--- - You don't need to specify a value if the following default - settings for the DMA channel are correct: - <<< MACH-2 : 2 >>> - <<< FC-10/FC-20: 3 >>> - <<< Secondary : 2 >>> - Secondary refers to a secondary FDC controller like the "high speed" - controllers delivered by Seagate or Exabyte or Iomega's Ditto Dash. - Please make sure that the setting for the IO base address - specified here is correct. USE THE MANUAL OF YOUR TAPE DRIVE OR - CONTROLLER CARD TO DETERMINE THE CORRECT SETTING. If you are already - successfully using the tape drive with another operating system then - you definitely should use the same settings for the IO base that has - proven to work with that other OS. - - Note that this menu lets you specify only the default setting for - the DMA channel. The hardware configuration can be changed at boot - time (when ftape is compiled into the kernel, i.e. if you said Y to - "Floppy tape drive") or module load time (i.e. if you said M to - "Floppy tape drive"). - - Please read also the file <file:Documentation/ftape.txt> which - contains a short description of the parameters that can be set at - boot or load time. - -config FT_FDC_THR - int "Default FIFO threshold (EXPERIMENTAL)" - depends on FTAPE && EXPERIMENTAL - default "8" - help - Set the FIFO threshold of the FDC. If this is higher the DMA - controller may serve the FDC after a higher latency time. If this is - lower, fewer DMA transfers occur leading to less bus contention. - You may try to tune this if ftape annoys you with "reduced data - rate because of excessive overrun errors" messages. However, this - doesn't seem to have too much effect. - - If unsure, don't touch the initial value, i.e. leave it at "8". - -config FT_FDC_MAX_RATE - int "Maximal data rate to use (EXPERIMENTAL)" - depends on FTAPE && EXPERIMENTAL - default "2000" - ---help--- - With some motherboard/FDC combinations ftape will not be able to - run your FDC/tape drive combination at the highest available - speed. If this is the case you'll encounter "reduced data rate - because of excessive overrun errors" messages and lots of retries - before ftape finally decides to reduce the data rate. - - In this case it might be desirable to tell ftape beforehand that - it need not try to run the tape drive at the highest available - speed. If unsure, leave this disabled, i.e. leave it at 2000 - bits/sec. - -config FT_ALPHA_CLOCK - int "CPU clock frequency of your DEC Alpha" if ALPHA - depends on FTAPE - default "0" - help - On some DEC Alpha machines the CPU clock frequency cannot be - determined automatically, so you need to specify it here ONLY if - running a DEC Alpha, otherwise this setting has no effect. - diff --git a/drivers/char/ftape/Makefile b/drivers/char/ftape/Makefile deleted file mode 100644 index 0e67d2f8b7e..00000000000 --- a/drivers/char/ftape/Makefile +++ /dev/null @@ -1,28 +0,0 @@ -# -# Copyright (C) 1997 Claus Heine. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; see the file COPYING. If not, write to -# the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. -# -# $Source: /homes/cvs/ftape-stacked/ftape/Makefile,v $ -# $Revision: 1.4 $ -# $Date: 1997/10/05 19:17:56 $ -# -# Makefile for the QIC-40/80/3010/3020 floppy-tape driver for -# Linux. -# - -obj-$(CONFIG_FTAPE) += lowlevel/ -obj-$(CONFIG_ZFTAPE) += zftape/ -obj-$(CONFIG_ZFT_COMPRESSOR) += compressor/ diff --git a/drivers/char/ftape/README.PCI b/drivers/char/ftape/README.PCI deleted file mode 100644 index 18de159d36e..00000000000 --- a/drivers/char/ftape/README.PCI +++ /dev/null @@ -1,81 +0,0 @@ -Some notes for ftape users with PCI motherboards: -================================================= - -The problem: ------------- - -There have been some problem reports from people using PCI-bus based -systems getting overrun errors. -I wasn't able to reproduce these until I ran ftape on a Intel Plato -(Premiere PCI II) motherboard with bios version 1.00.08AX1. -It turned out that if GAT (Guaranteed Access Timing) is enabled (?) -ftape gets a lot of overrun errors. -The problem disappears when disabling GAT in the bios. -Note that Intel removed this setting (permanently disabled) from the -1.00.10AX1 bios ! - -It looks like that if GAT is enabled there are often large periods -(greater than 120 us !??) on the ISA bus that the DMA controller cannot -service the floppy disk controller. -I cannot imagine this being acceptable in a decent PCI implementation. -Maybe this is a `feature' of the chipset. I can only speculate why -Intel choose to remove the option from the latest Bios... - -The lesson of this all is that there may be other motherboard -implementations having the same of similar problems. -If you experience a lot of overrun errors during a backup to tape, -see if there is some setting in the Bios that may influence the -bus timing. - -I judge this a hardware problem and not a limitation of ftape ;-) -My DOS backup software seems to be suffering from the same problems -and even refuses to run at 1 Mbps ! -Ftape will reduce the data-rate from 1 Mbps to 500 Kbps if the number -of overrun errors on a track exceeds a threshold. - - -Possible solutions: -------------------- - -Some of the problems were solved by upgrading the (flash) bios. -Other suggest that it has to do with the FDC being on the PCI -bus, but that is not the case with the Intel Premiere II boards. -[If upgrading the bios doesn't solve the problem you could try -a floppy disk controller on the isa-bus]. - -Here is a list of systems and recommended BIOS settings: - - - Intel Premiere PCI (Revenge): - -Bios version 1.00.09.AF2 is reported to work. - - - - Intel Premiere PCI II (Plato): - -Bios version 1.00.10.AX1 and version 11 beta are ok. -If using version 1.00.08.AX1, GAT must be disabled ! - - - - ASUS PCI/I-SP3G: - -Preferred settings: ISA-GAT-mode : disabled - DMA-linebuffer-mode : standard - ISA-masterbuffer-mode : standard - - - DELL Dimension XPS P90 - -Bios version A2 is reported to be broken, while bios version A5 works. -You can get a flash bios upgrade from http://www.dell.com - - -To see if you're having the GAT problem, try making a backup -under DOS. If it's very slow and often repositions you're -probably having this problem. - - --//-- - LocalWords: ftape PCI bios GAT ISA DMA chipset Mbps Kbps FDC isa AF ok ASUS - LocalWords: SP linebuffer masterbuffer XPS http www com diff --git a/drivers/char/ftape/RELEASE-NOTES b/drivers/char/ftape/RELEASE-NOTES deleted file mode 100644 index 03799dbc05a..00000000000 --- a/drivers/char/ftape/RELEASE-NOTES +++ /dev/null @@ -1,966 +0,0 @@ -Hey, Emacs, we're -*-Text-*- mode! - -===== Release notes for ftape-3.04d 25/11/97 ===== -- The correct pre-processor statement for "else if" is "#elif" not - "elsif". -- Need to call zft_reset_position() when overwriting cartridges - previously written with ftape-2.x, sftape, or ancient - (pre-ftape-3.x) versions of zftape. - -===== Release notes for ftape-3.04c 16/11/97 ===== -- fdc_probe() was calling DUMPREGS with a result length of "1" which - was just fine. Undo previous change. - -===== Release notes for ftape-3.04b 14/11/97 ===== - -- patches/2.x.x/floppy.c.diff was somewhat broken, releasing i/o - regions it never had allocated. -- fdc_probe() was calling DUMPREGS with a result length of "1" instead - of "10" -- Writing deleted data marks if the first segents on track zero are - should work now. -- ftformat should now be able to handle those cases where the tape - drive sets the read only status bit (QIC-40/80 cartridges with - QIC-3010/3020 tape drives) because the header segment is damaged. -- the MTIOCFTCMD ioctl may now be issued by the superuser ONLY. - -===== Release notes for ftape-3.04a 12/11/97 ===== -- Fix an "infinite loop can't be killed by signal" bug in - ftape_get_drive_status(). Only relevant when trying to access - buggy/misconfigured hardware -- Try to compensate a bug in the HP Colorado T3000's firmware: it - doesn't set the write protect bit for QIC80/QIC40 cartridges. - -===== Release notes for ftape-3.04 06/11/97 ===== -- If positioning with fast seeking fails fall back to a slow seek - before giving up. -- (nearly) no retries on "no data errors" when verifying after - formatting. Improved tuning of the bad sector map after formatting. -- the directory layout has changed again to allow for easier kernel - integration -- Module parameter "ftape_tracing" now is called "ft_tracing" because - the "ftape_tracing" variable has the version checksum attached to it. -- `/proc/ftape' interface for 2.0.* kernels. `/proc/ftape' no longer - is a directory but a file that contains all the information formerly - provided in separate files under the `/proc/ftape/' directory. -- Most of the configuration options have been prefixed by "CONFIG_FT_" - in preparation of the kernel inclusion. The Makefiles under - "./ftape/" should be directly usable by the kernel. -- The MODVERSIONS stuff is now auto-detected. -- Broke backslashed multi line options in MCONFIG into separate lines - using GNU-make's "+=" feature. -- The html and dvi version of the manual is now installed under - '/usr/doc/ftape` with 'make install` -- New SMP define in MCONFIG. ftape works with SMP if this is defined. -- attempt to cope with "excessive overrun errors" by gradually - increasing FDC FIFO threshold. But this doesn't seem to have too - much an effect. -- New load time configuration parameter "ft_fdc_rate_limit". If you - encounter too many overrun errors with a 2Mb controller then you - might want to set this to 1000. -- overrun errors on the last sector in a segment sometimes result in - a zero DMA residue. Dunno why, but compensate for it. -- there were still fdc_read() timeout errors. I think I have fixed it - now, please FIXME. -- Sometimes ftape_write() failed to re-start the tape drive when a - segment without a good sector was reached ("wait for empty segment - failed"). This is fixed. Especially important for > QIC-3010. -- sftape (aka ftape-2.x) has vanished. I didn't work on it for - ages. It is probably still possible to use the old code with - ftape-3.04, if one really needs it (BUT RECOMPILE IT) -- zftape no longer alters the contents of already existing volume - table entries, which makes it possible to fill in missing fields, - like time stamps using some user space program. -- ./contrib/vtblc/ contains such a program. -- new perl script ./contrib/scripts/listtape that list the contents of a - floppy tape cartridge parsing the output of "mt volinfo" + "mt fsf" -- the MTWEOF implementation has changed a little bit (after I had a - look at amanda). Calling MTWEOF while the tape is still held open - after writing something to the tape now will terminate the current - volume, and start a new one at the current position. -- the volume table maintained by zftape now is a doubly linked list - that grows dynamically as needed. - - formatting floppy tape cartridges - --------------------------------- - * there is a new user space formatting program that does most of the - dirty work in user space (auto-detect, computing the sector - coordinates, adjusting time stamps and statistics). It has a - simple command line interface. - * ftape-format.o has vanished, it has been folded into the low level - ftape.o module, and the ioctl interface into zftape.o. Most of the - complicated stuff has been moved to user space, so there was no - need for a separate module anymore. - * there is a new ioctl MTIOCFTCMD that sends a bare QIC-117 command - to the tape drive. - * there is a new mmap() feature to map the dma buffers into user - space to be used by the user level formatting program. - * Formatting of yet unformatted or totally degaussed cartridges - should be possible now. FIXME. - -===== Release notes for ftape-3.03b, <forgot the exact date> ==== - -ftape-3.03b was released as a beta release only. Its main new feature -was support of the DITTO-2GB drive. This was made possible by reverse -engineering done by <fill in his name> after Iomega failed to support -ftape. Although they had promised to do so (this makes me feel a bit -sad and uncomfortable about Iomega). - -===== Release notes for ftape-3.03a, 22/05/97 ==== - -- Finally fixed auto-un-loading of modules for kernels > 2.1.18 -- Add an "uninstall" target to the Makefile -- removed the kdtime hack -- texi2www didn't properly set the back-reference from a footnote back - to the regular text. - - zftape specific - --------------- - * hide the old compression map volume. Taper doesn't accept the - presence of non-Taper volumes and Taper-written volume on the same - tape. - * EOD (End Of Data) handling was still broken: the expected behavior - is to return a zero byte count at the first attempt to read past - EOD, return a zero byte count at the second attempt to read past - EOD and THEN return -EIO. - - ftape-format specific - --------------------- - * Detection of QIC-40 cartridges in select_tape_format() was broken - and made it impossible to format QIC-3010/3020 cartridges. - * There are strange "TR-1 Extra" cartridges out there which weren't - detected properly because the don't strictly conform to the - QIC-80, Rev. N, spec. - -===== Release notes for ftape-3.03, 30/04/97 ===== - -- Removed kernel integration code from the package. I plan to provide - a package that can be integrated into the stock kernel separately - (hopefully soon). - As a result, a simple `make' command now will build everything. -- ALL compile time configuration options have been moved to the file - `MCONFIG'. -- Quite a few `low level' changes to allow formatting of cartridges. -- formatting is implemented as a separate module `ftape-format.o'. The - modified `mt' program contains sample code that shows how to use it. -- The VFS interface has been moved from the `ftape.o' module to the - high level modules `zftape.o' resp. `sftape.o'. `ftape.o' contains - the hardware support only. -- A bit of /proc support for kernels > 2.1.28 -- Moved documentation to Doc subdir. INSTALL now contains some real - installation notes. -- `install' target in Makefile. - -zftape specific: ----------------- - -- zftape works for large cartridges now ( > 2^31 bytes) -- MTIOCVOLINFO and MTIOCGETSIZE now return the size in KILOBYTES, - NO LONGER in bytes. - -- permissions for write access to a cartridge have changed: - * zftape now also takes the file access mode into account - * zftape no longer allows writing in the middle of the recorded - media. The tape has to be positioned at BOT or EOD for write - access. - -- MTBSF has changed. It used to position at the beginning of the - previous file when called with count 1. This was different from the - expected behavior for other Un*x tape drivers (i.e. SCSI). MTBSF - with count 1 should merely position at the beginning of the current - volume. Fixed. As a result, `tar --verify' now produces the desired - result: it verifies the last written volume, not the pre-last - written volume. - -- The compression map has vanished --> no need for `mt erase' any - more. Fast seeking in a compressed volume is still be possible, but - takes slightly longer. As a side effect, you may experience an - additional volume showing up in front of all others for old - cartridges. This is the tape volume that holds the compression map. - -- The compression support for zftape has been moved to a separate - module `zft-compressor'. DON'T forget to load it before trying to - read back compressed volumes. The stock `zftape.o' module probes for - the module `zft-compressor' using the kerneld message channel; you - have to install `zft-compressor.o' in a place where modprobe can - find it if you want to use this. - -- New experimental feature that tries to get the broken down GMT time - from user space via a kernel daemon message channel. You need to - compile and start the `kdtime' daemon contained in the contrib - directory to use it. Needed (?) for time stamps in the header - segments and the volume table. - -- variable block size mode via MTSETBLK 0 - -- keep modules locked in memory after the block size has been changed - -sftape specific: ----------------- - -- end of tape handling should be fixed, i.e. multi volume archives - written with `afio' can be read back now. - - -===== Release notes for ftape-3.02a, 09/01/97 ===== - -No big news: -- call zft_init() resp. sft_init() when compiling the entire stuff - into the kernel image. -- fix bug in ftape-setup.c when NO_TRACE_AT_ALL was defined. -- fix bug in sftape-eof.c/zftape-eof.c for old kernels (1.2.*) -- add support for new module interface for recent kernels - -===== Release notes for ftape-3.02, 16/12/96 ===== -- Fixed the `FDC unlock command failed' bug in fdc-io.c. When the FIFO - was already locked when ftape was loaded, ftape failed to unlock it. -- Fixed compilation of `contrib/gnumt'. It now finds `mtio.h' even if - ftape is NOT included into the kernel source tree. -- fc-10.c: include <asm/io.h> for inb() and outb(). -- ftape/sftape/zftape: all global variable now have either a `ftape_', - a `ft_', `sft_', `zft_' or `qic_' prefix to prevent name clashes - with other parts of the kernel when including ftape into the kernel - source tree. -- Kerneld support has changed. `ftape' now searches for a module - `ftape-frontend' when none of the frontend (`sftape' or `zftape') is - loaded. Please refer to the `Installation/Loading ftape' section of - the TeXinfo manual. -- Add load resp. boot-time configuration of ftape. There are now - variables ft_fdc_base, ft_fdc_dma and ft_fdc_irq corresponding to - the former FDC_BASE etc. compile time definitions. One can also use - the kernel command line parameters to configure the driver if it is - compiled into the kernel. Also, the FC-10/FC-20 support is load-time - configurable now as well as the MACH-II hack (ft_probe_fc10, - resp. ft_mach2). Please refer to the section `Installation/Configure - ftape' of the TeXinfo manual. -- I removed the MODVERSIONS option from `Makefile.module'. Let me alone - with ftape and MODVERSIONS unless you include the ftape sources into - the kernel source tree. -- new vendors in `vendors.h': - * HP Colorado T3000 - * ComByte DoublePlay (including a bug fix for their broken - formatting software, thanks to whraven@njackn.com) - * Iomega DITTO 2GIG. NOTE: this drive cannot work with ftape because - the logical data layout of the cartridges used by this drive does - NOT conform to the QIC standards, it is a special Iomega specific - format. I've sent mail to Iomega but didn't receive an answer - yet. If you want this drive to be supported by ftape, ask Iomega - to give me information about it. -- zftape: - * re-introduced the MTIOC_ZFTAPE_GETBLKSZ ioctl for compatibility - with zftape 1.06a and earlier. Please don't use it when writing - new software, use the MTIOCVOLINFO ioctl instead. - * Major overhaul of the code that updates the header segments. Never - change the tape label unless erasing the tape. Thus we almost - never need to write the header segments, unless we would modify - the bad sector map which isn't done yet. Updating of volume table - and compression map more secure now although it takes a bit - longer. - * Fixed bug when aborting a write operation with a signal: zftape - now finishes the current volume (i.e. writes an eof marker) at the - current position. It didn't before which led to somehow *strange* - behavior in this cases. - * Keep module locked in memory when using it with the non-rewinding - devices and the tape is not logical at BOT. Needed for kerneld - support. -- sftape: - * Keep module locked in memory when using it with the non-rewinding - devices and the tape is not logical at BOT. Needed for kerneld - support. - -===== Release notes for ftape-3.01, 14/11/96 ===== - -- Fixed silly bugs in ftape-3.00: - * MAKEDEV.ftape: major device number must be 27, not 23 - * sftape/sftape-read.c: sftape_read_header_segments() called - itself recursively instead of calling ftape_read_header_segment() - * zftape/qic-vtbl.h: conversion of ftape's file marks to zftape's - internal volume table was broken. - * patches/2.x.x/linux-2.0.21.dif: my RCS (resp. CVS) system replaced - the `$Revison:' etc. macros in the `ftape.h' concerning part of the - patch :-( Fixed. - * info/ftape.info: Fixed misspellings (`cp' <-> `cp -r' etc.) - * when ftape/sftape or ftape/zftape was compiled into the kernel the - variable ftape_status was declared twice. Fixed. - * removed reference to undeclared variable kernel_version when not - compiling as module - * fixed a bug introduced by the use of bit-fields for some flags - (i.e. write_protected, no_cartridge, formatted) - * flag `header_read' is now reset correctly to zero when tape is - removed. -- fixed a bug in sftape/sftape-eof.c that was already in the original - ftape code. MTFSF/BSF was not handled correctly when positioned - right before the file mark (think of tar) -- Changed TRACE macros (following a suggestion of Marcin Dalecki) to use - the predefined __FUNCTION__ macro of GCC. Spares about 4k of code. -- added new vendor id for Iomega DITTO 2GIG -- fixed a bug already present in zftape-1.06 when aborting a write - with a signal: we now finish the current volume at that - position. Header segments remain NOT up to date until an explicit call - to MTREW or MTOFFL is done. - -===== Release notes for ftape-3.00, 14/10/96 ===== - -- Merged ftape with zftape. There are three modules now: - ftape for the hardware support, sftape for the implementation of the - original ftape eof mark stuff and zftape that implements zftape's way - of handling things (compression, volume table, tape blocks of - constant length) -- Documentation in TeXinfo format in the `info' subdirectory. -- New ioctls for zftape. See zftape/zftape.h -- Dummy formatting ioctl for ftape. See ftape.h -- Kernel patch files for the 2.*.* series to include ftape-3.00 in the - kernel source tree. These includes a kernel compatible Config.in - script and fairly large online information for the kernel configure - script. -- Support for compiling with Linux-1.2.13. -- Modified GNU mt from their cpio package that can handle the new - ioctls. -- ftape/sftape/zftape is kerneld save now! - -Notes on sftape: -- sftape implements the eof handling code of the original ftape. If - you like to stick with the original ftape stuff, you have to use - this module, not zftape. -- sftape is kerneld save, unlike the original ftape. -- we keep the entire header segment now in memory, so no need to read - it before updating the header segments. Additional memory - consumption: 256 bytes. - -Notes for zftape: -- zftape has support for tapes with format code 6 now, which use a - slightly different volume table format compared with other floppy - tapes. -- new ioctls for zftape. Have a look at zftape/zftape.h -- The internal volume table representation has changed for zftape. Old - cartridges are converted automatically. -- zftape no longer uses compression map segments, which have vanished - from the QIC specs, but creates volume table entry that reserves - enough space for the compression map. -- zftape is kerneld save now. -- we keep the entire header segment now in memory, so no need to read - it before updating the header segments. Additional memory - consumption: 256 bytes. - -Notes for contrib/gnumt: -- modified mt from the GNU cpio package that supports all the new - ioctls of zftape. -Notes for contrib/swapout: -- This contains the swapout.c program that was written by Kai - Harrekilde-Pederson. I simply added a Makefile. - -===== Release notes for ftape-2.10, 14/10/96 ===== - -The ftape maintainer has changed. -Kai Harrekilde-Petersen <khp@dolphinics.no> -has resigned from maintaining ftape, and I, -Claus-Justus Heine <claus@momo.math.rwth-aachen.de>, -have taken over. - -- Added support for tapes with `format code 6', i.e. QIC-3020 tapes - with more than 2^16 segments. -- merged changes made by Bas Laarhoven with ftape-2.09. Refer - to his release notes below. I've included them into this - file unchanged for your reference. -- disabled call stack back trace for now. This new feature - introduced by the interim release 2.0.x still seems to - be buggy. -- Tried to minimize differences between the ftape version - to be included into the kernel source tree and the standalone - module version. -- Reintroduced support for Linux-1.2.13. Please refer to the - Install-guide. - -===== Release notes for ftape-2.09, 16/06/96 ===== - -There aren't any really big news in this release, mostly just that I -(the maintainer) have changed my email address (due to a new job). My -new address is <khp@dolphinics.no> - -- The CLK_48MHZ and FDC_82078SL options has gone (all 2Mbps cards seem - to use a 48MHz oscillator anyway and I haven't heard of an 'SL - chip out there). -- The S82078B has been `downgraded' to i82077AA compability. -- TESTING option revived. Right now, it'll enable the (seriously broken) - 2Mbps code. If you enable it, you'll experience a tape drive that's - *really* out to lunch! -- Some (bold) changes in the init code. Please notify me if they - break things for you. - -===== Release notes for ftape-2.08, 14/03/96 ===== - -If you correct a problem with ftape, please send your patch to -khp@dolphinics.no too. - -- Updated to reflect that NR_MEM_LISTS is gone in 1.3.74 -- Teac 700 added to list of known drives. -- The registered device name is now "ft" rather than "ftape". - -===== Release notes for ftape-2.07a, 14/03/96 ===== - -Bugfixes by Marcin Dalecki <dalecki@namu03.gwdg.de>: -- In the last release it just compiled against 1.3.70; - now the params to request_irq() and free_irq are() are fixed, so it also - works in 1.3.73 :-) -- Support for modules is now correct for newer kernels. - -===== Release notes for ftape-2.07, 04/03/96 ===== - - -- ftape updated to compile against 1.3.70. -- Iomega 700 and Wangtek 3200 recognised. - - -===== Release notes for ftape-2.06b, 13/02/96 ===== - -Another simple bugfix version. - -- Jumbo 700 recognised. -- Typo in vendors.h fixed. - - -===== Release notes for ftape-2.06a, 10/02/96 ===== - -This release is a simple bugfix version. - -- Linux/SMP: ftape *should* work. -- FC-10/20: Only accepts IRQs 3-7, or 9. If IRQ 9, properly tell the card - to use IRQ 2. Thanks to Greg Crider (gcrider@iclnet.org) for finding and - locating this bug and testing the patch. -- Insight drive recognised correctly again. -- Motor-on wakeup version of the Iomega 250 drive added - - -===== Release notes for ftape-2.06, 28/01/96 ===== - -Special thanks go to Neal Friedman and Steven Sorbom for their -help in producing and testing this release. - -I have continued to clean up the code, with an eye towards inclusion -of ftape in Linus' official kernel (In fact, as I type this, I am -running on a kernel with ftape support statically linked). I have -test-compiled ftape against my 1.2.13 tree without problems. -Hopefully, everything should be OK for the v1.2.x people. - -WARNING! Alan Cox has mailed me that ftape does *NOT* work with -Linux/SMP. If you try to run ftape under Linux/SMP, it will cause a -kernel deadlock (which is worse than a panic). - -- QIC-3020/TR-3: 1Mbps support works. Neal is capable of reading and - writing data to a tape. ftape will automatically detect the type of - tape (e.g. TR-3 vs QIC-80) and move the fdc in and out of - "perpendicular mode" as necessary. -- 2Mbps support is disabled by default, since it is not fully - debugged. If you are adventurous, remove -DFDC_82078SL in the - Makefile and see what happens :-) -- fdc detection: silly bugs removed (Only 2Mbps fdcs were affected) - and added detection of the National Semiconductors PC8744 fdc chip - (used in the PC873xx "super-IO" chips). -- Removed warning about incompatible types when compiling with Linux - 1.2.x. -- README.PCI updated with info about the DELL Dimension XPS P90. -- Connor TST3200R added to detected drives. -- `swapout' utility added to distribution. It will dirty 5Meg of - memory, trying to swap out other programs. Just say `make swapout' - to build it. ftape will do this automatically Real Soon Now (ie: - when I have found out which kernel memory alloc function to call). - - -===== Release notes for ftape-2.05, 08/01/96 ===== - -- For v1.2.x Kernels, you must apply the patch linux-1.2/ksyms.patch to - the kernel and rebuild it (it adds the __get_dma_pages symbol to - ksyms.c). -- Included new asm-i386/io.h file from v1.3.x kernel series, to enable - gcc v.2.7.[12] to compile v1.2.x kernels (linux-1.2/io.h). -- Module versions: If you wish to compile ftape as a versioned module, - you must first compile your kernel with CONFIG_MODVERSIONS=y. - Otherwise, you will get complaints that <linux/modversions.h> does not - exist (if that happens, a `touch modversions.h' will help you out). -- CLK_48MHZ: new define in the Makefile (default: non-zero). If you have - a tape controller card that uses the i82078(-1) chip, but cannot get - it to work with ftape, try set it to 0 (and please report this). -- QIC-3010/3020: Complete support is still missing, but will hopefully - come soon. Steven Sorbom has kindly provided me with hints about - this. Writing of QIC-3020 tapes definitely does NOT work (do not try - it! - the drive will not be in "perpendicular mode" and this will ruin - the formatting info on the tape). -- ftape_num_buffers is out of fashion: use NR_BUFFERS instead (and - recompile if you want to change it :-). - - -===== Release notes for ftape-2.04, 01/01/96 ===== - -This version by Kai Harrekilde-Petersen <khp@dolphinics.no> - -- ALERT! Support for Kernels earlier then v1.1.85 is about to go away. - I intend to clean up some of the code (getting rid of an annoyingly - large numbers of #ifdef mostly), which means that support for - pre-1.1.85 kernels must go as well. -- NR_FTAPE_BUFFERS is gone; You can instead select the number of dma - buffers by saying `insmod ftape.o ftape_num_buffer=<n>' instead. -- Configure script gone. ftape will now automagically determine your - kernel version by /usr/include/linux/version.h instead. -- CONFIG_MODVERSIONS now work. All combinations of versioned / - unversioned kernel and ftape module works (at least with my 1.3.52 - kernel). -- If you have problems with inserting ftape into an old (1.2.x) - kernel (e.g. insmod says "1.2.8 does not match 1.2.8), recompile - your modules utilities with your new compiler. -- Reveal TB1400 drive added to vendors.h -- Support for the i82078-1 (2Mbps) chip is coming along. The - biggest problem is that I don't have such a card, which makes - testing / debugging somewhat problematic. The second biggest - problem is that I do not have the QIC-3010/3020 standards either. - Status right now is that the chip is detected, and it should be - possible to put it into 2Mbps mode. However, I do not know what - "extras" are needed to complete the support. Although putting the - i82078 into 1Mbps mode ought to work out of the box, it doesn't - (right now, ftape complains about id am errors). - - -===== Release notes for ftape-2.04beta5, 29/12/95 ===== - -Bas offline linux-tape ----------------------- -For reasons only known to the majordomo mail list processor, Bas was -kicked off the linux-tape list sometime during the summer. Being -overworked at his for-pay job, he didn't notice it much. Instead I -(Kai, khp@dolphinics.no) has worked on ftape to produce the 2.04(beta) -version. - -zftape ------- -Note that there exists a much improved version of ftape, written by -Claus-Justus Heine <claus@willi.math.rwth-aachen.de> which is named -zftape, which conforms to the QIC-80 specs on how to mark backups, and -is capable of doing automatic compression. However, zftape makes -substantial changes to ftape, and I (Kai) have therefore declined to -integrate zftape into ftape. Hopefully, this will happen soon. - -CONFIG_QIC117 removed from the kernel -------------------------------------- -The biggest change of all is that ftape now will allocate its dma -buffers when it is inserted. The means that the CONFIG_QIC117 option -has disappeared from the Linux kernel as of v1.3.34. If you have an -earlier kernel, simply answer 'no' to the question will do the trick -(if you get complains about __get_free_pages() missing, contact the -linux-tape mailing list). - -Note that ftape-2.04beta will work equally well on kernels with and -without `ftape support'. The only catch is, that you will waste -around 96-128Kb of precious DMA'able memory on a box that has ftape -support compiled in. - -Now for the real changes: - -- FC-20 can now use DMA channels 1, 2, and 3. Thanks to Daniel - Cohen, catman@wpi.edu. -- ftape no longer requires a (gigantic) 96Kb buffer to be statically - allocated by the kernel. -- Added new Iomega drive (8882) to vendors.h -- -fno-strength-reduce added to Makefile, since GCC is broken. -- i82078-1 (2Mbps) FDC support started. - - -===== Release notes for ftape-2.03b, 27/05/95 ===== - -- Prevented verify_area to return error if called with zero length. -- Fixed a bug in flush_buffers that caused too much padding to be - written when a final segment had bad sectors. -- Increased maximum fast-seek overshoot value from 5 to 10 segments. -- Breaking loop after 5 retries when positioning fails. -- Fixed wrong calculation of tape length for QIC-3010 and QIC-3020 - tapes (densities were swapped). -- Fixed wrong calculation of overshoot on seek_forward: Wrong sign - of error. -- Suppress (false) error message due to new tape loaded. -- Added two new CMS drives (11c3 and 11c5) to vendors.h. - - -===== Release notes for ftape-2.03a, 09/05/95 ===== - -- Fixed display of old error (even if already cleared) in ftape_open. -- Improved tape length detection, ioctls would fail for 425 ft tapes. - Until the tape length is calculated with data from the header - segment, we'll use worst-case values. -- Clear eof_mark after rewinding ioctls. -- Fixed wrong version message (2.03 had 2.02g id). -- Fixed bug that caused the fdc to be reset very frequently. - This shouldn't affect normal operation but the timing of the - report routines has changed again and that may cause problems. - We'll just have to find out.... -- Implemented correct write precompensation setting for QIC-3010/3020. -- Cleaned up fdc_interrupt_wait routine. Hope it still works :-) -- Finally removed (already disabled) special eof mark handling for - gnu tar. -- Changed order of get_dma_residue and disable_dma in fdc-isr.c - because the current order would fail on at least one system. - We're back to the original order again, hope (and expect) this - doesn't break any other system. - - -===== Release notes for ftape-2.03, 07/05/95 ===== - -(Changes refer to the first ftape-2.02 release) - -Support for wide and extended length tapes ------------------------------------------- -The Conner TSM 420 and 850 drives are reported to be working. -I haven't received any reports about other brands; the TSM 420 -and 850 seem to be the most widely used wide drives. -Extended length tapes (425 ft) with normal QIC-80 drives -are operating too (At least I've had no reports stating otherwise). -_Not_ yet completely supported (although they may work) are -QIC-3020 drives and 2 Mbps floppy disk controllers won't work at -the highest speed. -If someone is kind enough to send me one of these, I'll include -support for it too ;-) - -Easier configuration --------------------- -Problems due to wrong settings in the Makefile are prevented -by using a configuration script that sets the necessary (kernel -version dependent) compile time options. -This kernel version is now determined from the sources found -at /usr/src/linux, or if not found, the old way using -/proc/version. -Versioned modules will be used automatically when supported -by- and configured in- the kernel. -Note that the current modules code (1.1.87) is still broken -and _needs_ the fix included in the insmod directory. -Please don't send me any more Oops reports caused by insmod :-( - -Reduced module size -------------------- -The standard module size is much reduced and some compile time -options can even reduce it further. (I don't recommend this -for normal use but it can be handy for rescue diskettes) - -Option: Approx. module size: - -<standard> 150 Kb -NO_TRACE 125 Kb -NO_TRACE_AT_ALL 67 Kb - - -Much improved driver interruption ---------------------------------- -Most possible loops have been broken and signal detection -has been improved. -In most cases the driver can be aborted by ^C (SIGINT) and -SIGKILL (kill -9) will generate be a sure kill. -(Note that aborting a tape operation may damage the last -data written to tape) - -Improved error recovery ------------------------ -Ftape now returns an error (ENODATA) to the application if -a segment proves to be unrecoverable and then skips the -bad segment. -This causes most applications to continue to work (tar -and afio) loosing only a small amount (up to 29 Kb) of data. -Retried read operations will now be done slightly off-track -to improve the chance of success. Serious head off-track -errors will be detected. - -FC-10 and FC-20 controllers ---------------------------- -Ftape now supports both the old CMS FC-10 and the newer FC-20 -controllers. -Because the operation of these cards is still undocumented, -thus far they will only work with the default settings (See -Makefile). Any feed-back on how to use them with other settings -will be welcome ! -Compilation will fail if one changes the settings to illegal -values. - -Kernels and compilers ---------------------- -Ftape is currently being developed using the 2.5.8 compiler. -The older 2.4.5 probably works too (Set option in Makefile!). -I have no experience with any later compilers nor Elf support. -Any information on this is welcome. -The latest kernel I have tested ftape with is 1.2.6. - -Compression ------------ -An impressive collection of changes for ftape including -on-the-fly compression is still lying on my desk. -If 2.03 proves to be reliable I might start integrating these -but as usual, I'm short in time :-( - -Formatting ----------- -There is still no way to format tapes under Linux. As far as -I know all attempts to write such a program have died now. -Since formatted tapes are rather common now, I think all we -need is a utility that writes a worst case pattern and verifies -that with the drive put in verify mode, reducing margins. -Any takers ? - -Furthermore ------------ -Cleaned up messages. -Prepared to support multiple tape drives on one fdc. -Thanks to all the people who sent bug reports and helped me -improve the driver. Without trying to be complete I'll mention -Gary Anderson (without his accurate reports and unreliable -hardware there wouldn't be a 2.03), Stefan Kneifel (FC-20), -Robert Broughton (FC-20, you were almost there ;-), Bjorn -Ekwall (for the versioned modules and buggy insmod ;-), Peter -Fox, Christopher Oliver, Ralph Whittaker and not the least -Linus Torvalds (for Linux and keeping me busy because of -changes to the kernel ;-) -Thanks to anyone I forgot, for the bug reports, the ftape -bashing and the mental support... - - -That's it for now. Have Fun, - -Bas. - - -===== Release notes for ftape-2.02g, 06/05/95 ===== - -- Added extra test to break read-id loop with signal. -- Changed rewind code to handle negative overshoot for drives - that take very long to start or stop. -- Let use of get/set i/o-regions depend on kernel version. -- Changed code to use a more general test for conditional - compilations depending on kernel version. -- Improved micro-step functionality to go off-track only - while reading (id & data). -- Added failure on tape-not-referenced bit in ftape_command. -- Added FOREVER option to read-wait routine. -- Changed read-id to use shorter timeout causing smaller - rewinds on timeout. -- Made kernel-interface functions static. - - -===== Release notes for ftape-2.02f, 03/05/95 ===== - -- Added support for dual tape drives on my system, extended Configure - script to detect host 'dodo'. -- Log media defect in history if ecc failed and no data was returned. -- Fixed Configure script that was failing for kernel versions with - double digit version or revision numbers. - - -===== Release notes for ftape-2.02e, 01/05/95 ===== - -- Fixed reposition loop at logical eot (failing read_id). -- Fixed 34 segment offset when rewinding. -- Added fast seek capability for more than 255 segments. -- Fixed wrong busy result from ftape_command causing reverse - seek to fail. -- Added breakout from infinite rewind loop (if something fails). - - -===== Release notes for ftape-2.02d, 30/04/95 ===== - -- Improved abortion on signals: Interrupt will make a graceful - exit, Kill will be less nice and should be used if everything - else fails. -- Included check for tape-head off track. -- Implemented exit from tape-start loop. -- Added kernel io-port registration. -- Implemented skip of failing segment (ENODATA) on ecc failure. - This allows afio and tar to continue when the tape is damaged. -- Made distinction between drive names with different codes. - - -===== Release notes for ftape-2.02c, 22/04/95 ===== - -- Fixed too tight command queueing after tape stop/pause command - issued from within interrupt service routine (Showed as timeout - on Acknowledge errors during retries on some systems) -- Tried to fix timeouts when using 425 ft tape because the extended - length doesn't seem to be detected by the hardware. - We now use the format code from the header segment so adjust the - timing after reading the header segment. -- Fixed some messages stating 'unexpected something...' being not - unexpected anymore. -- Started preparations for merge of dynamic buffer allocation and - compression code. -- Changed some debug messages to include relevant segment information - at level 4. -- Included early bail-out when drive offline, preventing a lot of - false messages. -- Moved ftape_parameter_xxx() offsets into function instead of in calls. -- Removed 'weird, drive busy but no data' error when caused by - an error during a read-id. -- Improved 'timeout on acknowledge' diagnostics. -- Moved MODULE option into Configure. -- Reduced code size when no tracing at all was set (Claus Heine). -- No longer log error code 0 (no error) as an error. - - -===== Release notes for ftape-2.02b, 09/04/95 ===== - -- Relaxed timing for status operation and displaying - abnormal results. Hopefully this shows what's going - wrong with the Conner TSM850R drives. -- Created script for configuration, using version number - of kernel source if available, otherwise /proc/version. -- Fixed conditionals in kernel-interface.c. -- Removed unavoidable TRACE output. - - -===== Release notes for ftape-2.02a, 01/04/95 ===== - -- Implemented `new-style' (versioned) modules support for new - kernels. -- Reduced size of module by moving static data to bss. -- Now using version number of kernel source instead of running - kernel for kernel versions >= 1.1.82 -- Added feedback on drive speeds to vendor information. -- Included fixed insmod sources to distribution (Let's hope - the modules distribution get fixed soon :-/). - -Note that I haven't yet implemented any of the code extension I -received. I hope to find some time to do this soon. - - -===== Release notes for ftape-2.02, 15/01/95 ===== - - -- Fixed failing repositioning when overshoot was incremented. -- Fixed rate selection: Because of a deficiency in the QIC-117 - specification one cannot distinguish between a not implemented - and a failing command. Therefor we now try to find out if the - drive does support this command before usage. -- Fixed error retry using wrong offset in fdc-isr. -- Improved retry code to retry only once on a single no-data - error in a segment. -- Validate sector number extracted from eof mark because an - invalid file mark (due to ???) could cause kernel panic. -- Split ftape-io.c into ftape-io.c and ftape-ctl.c files. -- Corrected too high media error count after writing to - a bad tape. -- Added #include <asm/segment.h> again because old kernel versions - need it. -- Fixed fdc not being disabled when open failed because no tape - drive was found. -- Fixed problem with soft error in sector 32 (shift operator with - shiftcount 32 is not defined). - - -===== Release notes for ftape-2.01, 08/01/95 ===== - - -- Removed TESTING setting from distributed Makefile. -- Fixed `mt asf' failure: Rewind was deferred to close which - overruled the fsf ioctl. -- Prevented non-interruptible commands being interrupted. -- Added missing timeout.pause setting. -- Maximum tape speed read from drive type information table. - If the information is not in the table (0) the drive will - determine the speed itself and put a message in the logfile. - This information should then be added to the table in the - vendors.h file (and reported to me). -- Added call to ftape_init_drive after soft reset for those - (antique) drives that don't do an implicit seek_load_point - after a reset or power up. -- Don't try to set data rate if reset failed. -- Prevent update of seek variables when starting from the - beginning or the end of the tape. -- Fixed wrong adjustment of overshoot in seek_forward(). -- Added sync to Makefile (again). -- Added code to diagnose timer problems (calibr.c). -- Replaced time differences by timediff calls. -- Removed reference to do_floppy from object for recent kernels. -- Fixed wrong display of 'failing dma controller' message. -- Removed various no longer used #include statements. -- Added max. tape speed value to vendor-struct. -- Changed ftape-command to check pre-conditions and wait - if needed. -- Further updated qic117.h to rev G. -- Combined command name table and restrictions table to one. - Extended this table with some new fields. -- Increased timeout on Ack timer value and included code to - report out of spec behaviour. -- Increased rewind timeout margin to calculated + 20%. -- Improved data rate selection so it won't fail on some - older (pre standard) drives. -- Changed initialisation code so drive will be rewound if the - driver is reloaded and the tape is not at bot. -- Moved some of the flush operations from close to the ioctls. -- Added exit code value to failing verify area message. -- Loop until tape halted in smart-stop. -- Fast seek handled specially if located at bot or eot. -- Being more conservative on overshoot value. - - -===== Release notes for ftape-2.00, 31/12/94 ===== - - The Install-guide is completely rewritten and now also includes -some information on how to use the driver. If you're either new -to ftape or new to Unix tape devices make sure to read it ! - - If you own a pci system and experience problems with the -ftape driver make sure to read the README.PCI file. It contains -some hints on how to fix your hardware. - - For anybody who hasn't noticed: The version number of the -driver has been incremented (The latest released version has -been version 1.14d). - This has been done for two major reasons: - - o A new (better) error recovery scheme is implemented. - o Support for new drive types has been added. - - All these improvements/changes will probably include a couple -of new (and old?) bugs. If you encounter any problems that you think -I'm not yet aware of, feel free to send a report to <bas@vimec.nl>. - I recommend keeping a version of ftape-1.14d available, just -in case ;-) - - This version should work with all kernel versions from 1.0.9 up -to 1.1.72 (and probably earlier and later versions too). - - -Major new features: - -- Better handling of tapes with defects: When a sector repeatedly - (SOFT_RETRIES in ftape.h) cannot be written to or read from it is - marked as an hard error and gets skipped. - The error correction code can handle up to three of these hard - errors provided there are no other errors in that segment (32 Kb). - -- Allows writing to tapes with defects (although the risk of loosing - data increases !) - Look for the media-defects entry printed with the statistics when - the tape is closed. A non-zero value here shows a bad tape. - [the actual count is wrong (too high), this is a known bug]. - -- Use of backup header segment if first one is failing. - -- Support for extended length tapes with QIC-80: both 425 and 1100 ft. - 0.25 inch tapes are now recognized and handled. - -- Support for new QIC-80 drives with 8 mm `wide' tapes (e.g. Conner - TSM 420). - -- Support for new QIC-3010 and QIC-3020 drives (experimental) with - both 0.25 inch and 8 mm tapes. - -Some minor features were added, a couple of small bugs were fixed and -probably some new ones introduced ;-). - -[lseek() didn't make it into this version] - -Have fun, - -Bas. ----- - LocalWords: ftape MCONFIG mt VFS zftape resp sftape proc subdir MTIOCVOLINFO - LocalWords: MTIOCGETSIZE BOT EOD MTBSF zft kerneld modprobe kdtime contrib TR - LocalWords: MTSETBLK afio uninstall texi www EIO QIC init sft eof aka dma GB - LocalWords: SIGKILL MTIOCFTCMD mmap Iomega FDC fdc io gnumt mtio fc asm inb - LocalWords: outb ft qic frontend TeXinfo irq mach MODVERSIONS CONFIG html dvi - LocalWords: usr doc SMP Mb Dunno FIXME vtblc perl listtape volinfo fsf MTWEOF - LocalWords: amanda degaussed ComByte DoublePlay whraven njackn com MTIOC vtbl - LocalWords: GETBLKSZ MAKEDEV zftape's linux dif CVS Revison cp MTREW MTOFFL - LocalWords: MTFSF BSF Marcin Dalecki GCC Config cpio swapout Kai Harrekilde - LocalWords: Pederson khp dolphinics Justus claus momo rwth aachen Laarhoven diff --git a/drivers/char/ftape/compressor/Makefile b/drivers/char/ftape/compressor/Makefile deleted file mode 100644 index 1fbd6c4019d..00000000000 --- a/drivers/char/ftape/compressor/Makefile +++ /dev/null @@ -1,31 +0,0 @@ -# -# Copyright (C) 1997 Claus-Justus Heine. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; see the file COPYING. If not, write to -# the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. -# -# $Source: /homes/cvs/ftape-stacked/ftape/compressor/Makefile,v $ -# $Revision: 1.1 $ -# $Date: 1997/10/05 19:12:28 $ -# -# Makefile for the optional compressor for th zftape VFS -# interface to the QIC-40/80/3010/3020 floppy-tape driver for -# Linux. -# - -obj-$(CONFIG_ZFT_COMPRESSOR) += zft-compressor.o - -zft-compressor-objs := zftape-compress.o lzrw3.o - -CFLAGS_lzrw3.o := -O6 -funroll-all-loops diff --git a/drivers/char/ftape/compressor/lzrw3.c b/drivers/char/ftape/compressor/lzrw3.c deleted file mode 100644 index a032a0ee2a9..00000000000 --- a/drivers/char/ftape/compressor/lzrw3.c +++ /dev/null @@ -1,743 +0,0 @@ -/* - * $Source: /homes/cvs/ftape-stacked/ftape/compressor/lzrw3.c,v $ - * $Revision: 1.1 $ - * $Date: 1997/10/05 19:12:29 $ - * - * Implementation of Ross Williams lzrw3 algorithm. Adaption for zftape. - * - */ - -#include "../compressor/lzrw3.h" /* Defines single exported function "compress". */ - -/******************************************************************************/ -/* */ -/* LZRW3.C */ -/* */ -/******************************************************************************/ -/* */ -/* Author : Ross Williams. */ -/* Date : 30-Jun-1991. */ -/* Release : 1. */ -/* */ -/******************************************************************************/ -/* */ -/* This file contains an implementation of the LZRW3 data compression */ -/* algorithm in C. */ -/* */ -/* The algorithm is a general purpose compression algorithm that runs fast */ -/* and gives reasonable compression. The algorithm is a member of the Lempel */ -/* Ziv family of algorithms and bases its compression on the presence in the */ -/* data of repeated substrings. */ -/* */ -/* This algorithm is unpatented and the code is public domain. As the */ -/* algorithm is based on the LZ77 class of algorithms, it is unlikely to be */ -/* the subject of a patent challenge. */ -/* */ -/* Unlike the LZRW1 and LZRW1-A algorithms, the LZRW3 algorithm is */ -/* deterministic and is guaranteed to yield the same compressed */ -/* representation for a given file each time it is run. */ -/* */ -/* The LZRW3 algorithm was originally designed and implemented */ -/* by Ross Williams on 31-Dec-1990. */ -/* */ -/* Here are the results of applying this code, compiled under THINK C 4.0 */ -/* and running on a Mac-SE (8MHz 68000), to the standard calgary corpus. */ -/* */ -/* +----------------------------------------------------------------+ */ -/* | DATA COMPRESSION TEST | */ -/* | ===================== | */ -/* | Time of run : Sun 30-Jun-1991 09:31PM | */ -/* | Timing accuracy : One part in 100 | */ -/* | Context length : 262144 bytes (= 256.0000K) | */ -/* | Test suite : Calgary Corpus Suite | */ -/* | Files in suite : 14 | */ -/* | Algorithm : LZRW3 | */ -/* | Note: All averages are calculated from the un-rounded values. | */ -/* +----------------------------------------------------------------+ */ -/* | File Name Length CxB ComLen %Remn Bits Com K/s Dec K/s | */ -/* | ---------- ------ --- ------ ----- ---- ------- ------- | */ -/* | rpus:Bib.D 111261 1 55033 49.5 3.96 19.46 32.27 | */ -/* | us:Book1.D 768771 3 467962 60.9 4.87 17.03 31.07 | */ -/* | us:Book2.D 610856 3 317102 51.9 4.15 19.39 34.15 | */ -/* | rpus:Geo.D 102400 1 82424 80.5 6.44 11.65 18.18 | */ -/* | pus:News.D 377109 2 205670 54.5 4.36 17.14 27.47 | */ -/* | pus:Obj1.D 21504 1 13027 60.6 4.85 13.40 18.95 | */ -/* | pus:Obj2.D 246814 1 116286 47.1 3.77 19.31 30.10 | */ -/* | s:Paper1.D 53161 1 27522 51.8 4.14 18.60 31.15 | */ -/* | s:Paper2.D 82199 1 45160 54.9 4.40 18.45 32.84 | */ -/* | rpus:Pic.D 513216 2 122388 23.8 1.91 35.29 51.05 | */ -/* | us:Progc.D 39611 1 19669 49.7 3.97 18.87 30.64 | */ -/* | us:Progl.D 71646 1 28247 39.4 3.15 24.34 40.66 | */ -/* | us:Progp.D 49379 1 19377 39.2 3.14 23.91 39.23 | */ -/* | us:Trans.D 93695 1 33481 35.7 2.86 25.48 40.37 | */ -/* +----------------------------------------------------------------+ */ -/* | Average 224401 1 110953 50.0 4.00 20.17 32.72 | */ -/* +----------------------------------------------------------------+ */ -/* */ -/******************************************************************************/ - -/******************************************************************************/ - -/* The following structure is returned by the "compress" function below when */ -/* the user asks the function to return identifying information. */ -/* The most important field in the record is the working memory field which */ -/* tells the calling program how much working memory should be passed to */ -/* "compress" when it is called to perform a compression or decompression. */ -/* LZRW3 uses the same amount of memory during compression and decompression. */ -/* For more information on this structure see "compress.h". */ - -#define U(X) ((ULONG) X) -#define SIZE_P_BYTE (U(sizeof(UBYTE *))) -#define SIZE_WORD (U(sizeof(UWORD ))) -#define ALIGNMENT_FUDGE (U(16)) -#define MEM_REQ ( U(4096)*(SIZE_P_BYTE) + ALIGNMENT_FUDGE ) - -static struct compress_identity identity = -{ - U(0x032DDEA8), /* Algorithm identification number. */ - MEM_REQ, /* Working memory (bytes) required. */ - "LZRW3", /* Name of algorithm. */ - "1.0", /* Version number of algorithm. */ - "31-Dec-1990", /* Date of algorithm. */ - "Public Domain", /* Copyright notice. */ - "Ross N. Williams", /* Author of algorithm. */ - "Renaissance Software", /* Affiliation of author. */ - "Public Domain" /* Vendor of algorithm. */ -}; - -LOCAL void compress_compress (UBYTE *,UBYTE *,ULONG,UBYTE *, LONG *); -LOCAL void compress_decompress(UBYTE *,UBYTE *,LONG, UBYTE *, ULONG *); - -/******************************************************************************/ - -/* This function is the only function exported by this module. */ -/* Depending on its first parameter, the function can be requested to */ -/* compress a block of memory, decompress a block of memory, or to identify */ -/* itself. For more information, see the specification file "compress.h". */ - -EXPORT void lzrw3_compress( - UWORD action, /* Action to be performed. */ - UBYTE *wrk_mem, /* Address of working memory we can use.*/ - UBYTE *src_adr, /* Address of input data. */ - LONG src_len, /* Length of input data. */ - UBYTE *dst_adr, /* Address to put output data. */ - void *p_dst_len /* Address of longword for length of output data.*/ -) -{ - switch (action) - { - case COMPRESS_ACTION_IDENTITY: - *((struct compress_identity **)p_dst_len)= &identity; - break; - case COMPRESS_ACTION_COMPRESS: - compress_compress(wrk_mem,src_adr,src_len,dst_adr,(LONG *)p_dst_len); - break; - case COMPRESS_ACTION_DECOMPRESS: - compress_decompress(wrk_mem,src_adr,src_len,dst_adr,(LONG *)p_dst_len); - break; - } -} - -/******************************************************************************/ -/* */ -/* BRIEF DESCRIPTION OF THE LZRW3 ALGORITHM */ -/* ======================================== */ -/* The LZRW3 algorithm is identical to the LZRW1-A algorithm except that */ -/* instead of transmitting history offsets, it transmits hash table indexes. */ -/* In order to decode the indexes, the decompressor must maintain an */ -/* identical hash table. Copy items are straightforward:when the decompressor */ -/* receives a copy item, it simply looks up the hash table to translate the */ -/* index into a pointer into the data already decompressed. To update the */ -/* hash table, it replaces the same table entry with a pointer to the start */ -/* of the newly decoded phrase. The tricky part is with literal items, for at */ -/* the time that the decompressor receives a literal item the decompressor */ -/* does not have the three bytes in the Ziv (that the compressor has) to */ -/* perform the three-byte hash. To solve this problem, in LZRW3, both the */ -/* compressor and decompressor are wired up so that they "buffer" these */ -/* literals and update their hash tables only when three bytes are available. */ -/* This makes the maximum buffering 2 bytes. */ -/* */ -/* Replacement of offsets by hash table indexes yields a few percent extra */ -/* compression at the cost of some speed. LZRW3 is slower than LZRW1, LZRW1-A */ -/* and LZRW2, but yields better compression. */ -/* */ -/* Extra compression could be obtained by using a hash table of depth two. */ -/* However, increasing the depth above one incurs a significant decrease in */ -/* compression speed which was not considered worthwhile. Another reason for */ -/* keeping the depth down to one was to allow easy comparison with the */ -/* LZRW1-A and LZRW2 algorithms so as to demonstrate the exact effect of the */ -/* use of direct hash indexes. */ -/* */ -/* +---+ */ -/* |___|4095 */ -/* |___| */ -/* +---------------------*_|<---+ /----+---\ */ -/* | |___| +---|Hash | */ -/* | |___| |Function| */ -/* | |___| \--------/ */ -/* | |___|0 ^ */ -/* | +---+ | */ -/* | Hash +-----+ */ -/* | Table | */ -/* | --- */ -/* v ^^^ */ -/* +-------------------------------------|----------------+ */ -/* |||||||||||||||||||||||||||||||||||||||||||||||||||||||| */ -/* +-------------------------------------|----------------+ */ -/* | |1......18| | */ -/* |<------- Lempel=History ------------>|<--Ziv-->| | */ -/* | (=bytes already processed) |<-Still to go-->| */ -/* |<-------------------- INPUT BLOCK ------------------->| */ -/* */ -/* The diagram above for LZRW3 looks almost identical to the diagram for */ -/* LZRW1. The difference is that in LZRW3, the compressor transmits hash */ -/* table indices instead of Lempel offsets. For this to work, the */ -/* decompressor must maintain a hash table as well as the compressor and both */ -/* compressor and decompressor must "buffer" literals, as the decompressor */ -/* cannot hash phrases commencing with a literal until another two bytes have */ -/* arrived. */ -/* */ -/* LZRW3 Algorithm Execution Summary */ -/* --------------------------------- */ -/* 1. Hash the first three bytes of the Ziv to yield a hash table index h. */ -/* 2. Look up the hash table yielding history pointer p. */ -/* 3. Match where p points with the Ziv. If there is a match of three or */ -/* more bytes, code those bytes (in the Ziv) as a copy item, otherwise */ -/* code the next byte in the Ziv as a literal item. */ -/* 4. Update the hash table as possible subject to the constraint that only */ -/* phrases commencing three bytes back from the Ziv can be hashed and */ -/* entered into the hash table. (This enables the decompressor to keep */ -/* pace). See the description and code for more details. */ -/* */ -/******************************************************************************/ -/* */ -/* DEFINITION OF COMPRESSED FILE FORMAT */ -/* ==================================== */ -/* * A compressed file consists of a COPY FLAG followed by a REMAINDER. */ -/* * The copy flag CF uses up four bytes with the first byte being the */ -/* least significant. */ -/* * If CF=1, then the compressed file represents the remainder of the file */ -/* exactly. Otherwise CF=0 and the remainder of the file consists of zero */ -/* or more GROUPS, each of which represents one or more bytes. */ -/* * Each group consists of two bytes of CONTROL information followed by */ -/* sixteen ITEMs except for the last group which can contain from one */ -/* to sixteen items. */ -/* * An item can be either a LITERAL item or a COPY item. */ -/* * Each item corresponds to a bit in the control bytes. */ -/* * The first control byte corresponds to the first 8 items in the group */ -/* with bit 0 corresponding to the first item in the group and bit 7 to */ -/* the eighth item in the group. */ -/* * The second control byte corresponds to the second 8 items in the group */ -/* with bit 0 corresponding to the ninth item in the group and bit 7 to */ -/* the sixteenth item in the group. */ -/* * A zero bit in a control word means that the corresponding item is a */ -/* literal item. A one bit corresponds to a copy item. */ -/* * A literal item consists of a single byte which represents itself. */ -/* * A copy item consists of two bytes that represent from 3 to 18 bytes. */ -/* * The first byte in a copy item will be denoted C1. */ -/* * The second byte in a copy item will be denoted C2. */ -/* * Bits will be selected using square brackets. */ -/* For example: C1[0..3] is the low nibble of the first control byte. */ -/* of copy item C1. */ -/* * The LENGTH of a copy item is defined to be C1[0..3]+3 which is a number */ -/* in the range [3,18]. */ -/* * The INDEX of a copy item is defined to be C1[4..7]*256+C2[0..8] which */ -/* is a number in the range [0,4095]. */ -/* * A copy item represents the sequence of bytes */ -/* text[POS-OFFSET..POS-OFFSET+LENGTH-1] where */ -/* text is the entire text of the uncompressed string. */ -/* POS is the index in the text of the character following the */ -/* string represented by all the items preceeding the item */ -/* being defined. */ -/* OFFSET is obtained from INDEX by looking up the hash table. */ -/* */ -/******************************************************************************/ - -/* The following #define defines the length of the copy flag that appears at */ -/* the start of the compressed file. The value of four bytes was chosen */ -/* because the fast_copy routine on my Macintosh runs faster if the source */ -/* and destination blocks are relatively longword aligned. */ -/* The actual flag data appears in the first byte. The rest are zeroed so as */ -/* to normalize the compressed representation (i.e. not non-deterministic). */ -#define FLAG_BYTES 4 - -/* The following #defines define the meaning of the values of the copy */ -/* flag at the start of the compressed file. */ -#define FLAG_COMPRESS 0 /* Signals that output was result of compression. */ -#define FLAG_COPY 1 /* Signals that output was simply copied over. */ - -/* The 68000 microprocessor (on which this algorithm was originally developed */ -/* is fussy about non-aligned arrays of words. To avoid these problems the */ -/* following macro can be used to "waste" from 0 to 3 bytes so as to align */ -/* the argument pointer. */ -#define ULONG_ALIGN_UP(X) ((((ULONG)X)+sizeof(ULONG)-1)&~(sizeof(ULONG)-1)) - - -/* The following constant defines the maximum length of an uncompressed item. */ -/* This definition must not be changed; its value is hardwired into the code. */ -/* The longest number of bytes that can be spanned by a single item is 18 */ -/* for the longest copy item. */ -#define MAX_RAW_ITEM (18) - -/* The following constant defines the maximum length of an uncompressed group.*/ -/* This definition must not be changed; its value is hardwired into the code. */ -/* A group contains at most 16 items which explains this definition. */ -#define MAX_RAW_GROUP (16*MAX_RAW_ITEM) - -/* The following constant defines the maximum length of a compressed group. */ -/* This definition must not be changed; its value is hardwired into the code. */ -/* A compressed group consists of two control bytes followed by up to 16 */ -/* compressed items each of which can have a maximum length of two bytes. */ -#define MAX_CMP_GROUP (2+16*2) - -/* The following constant defines the number of entries in the hash table. */ -/* This definition must not be changed; its value is hardwired into the code. */ -#define HASH_TABLE_LENGTH (4096) - -/* LZRW3, unlike LZRW1(-A), must initialize its hash table so as to enable */ -/* the compressor and decompressor to stay in step maintaining identical hash */ -/* tables. In an early version of the algorithm, the tables were simply */ -/* initialized to zero and a check for zero was included just before the */ -/* matching code. However, this test costs time. A better solution is to */ -/* initialize all the entries in the hash table to point to a constant */ -/* string. The decompressor does the same. This solution requires no extra */ -/* test. The contents of the string do not matter so long as the string is */ -/* the same for the compressor and decompressor and contains at least */ -/* MAX_RAW_ITEM bytes. I chose consecutive decimal digits because they do not */ -/* have white space problems (e.g. there is no chance that the compiler will */ -/* replace more than one space by a TAB) and because they make the length of */ -/* the string obvious by inspection. */ -#define START_STRING_18 ((UBYTE *) "123456789012345678") - -/* In this algorithm, hash values have to be calculated at more than one */ -/* point. The following macro neatens the code up for this. */ -#define HASH(PTR) \ - (((40543*(((*(PTR))<<8)^((*((PTR)+1))<<4)^(*((PTR)+2))))>>4) & 0xFFF) - -/******************************************************************************/ - -/* Input : Hand over the required amount of working memory in p_wrk_mem. */ -/* Input : Specify input block using p_src_first and src_len. */ -/* Input : Point p_dst_first to the start of the output zone (OZ). */ -/* Input : Point p_dst_len to a ULONG to receive the output length. */ -/* Input : Input block and output zone must not overlap. */ -/* Output : Length of output block written to *p_dst_len. */ -/* Output : Output block in Mem[p_dst_first..p_dst_first+*p_dst_len-1]. May */ -/* Output : write in OZ=Mem[p_dst_first..p_dst_first+src_len+MAX_CMP_GROUP-1].*/ -/* Output : Upon completion guaranteed *p_dst_len<=src_len+FLAG_BYTES. */ -LOCAL void compress_compress(UBYTE *p_wrk_mem, - UBYTE *p_src_first, ULONG src_len, - UBYTE *p_dst_first, LONG *p_dst_len) -{ - /* p_src and p_dst step through the source and destination blocks. */ - register UBYTE *p_src = p_src_first; - register UBYTE *p_dst = p_dst_first; - - /* The following variables are never modified and are used in the */ - /* calculations that determine when the main loop terminates. */ - UBYTE *p_src_post = p_src_first+src_len; - UBYTE *p_dst_post = p_dst_first+src_len; - UBYTE *p_src_max1 = p_src_first+src_len-MAX_RAW_ITEM; - UBYTE *p_src_max16 = p_src_first+src_len-MAX_RAW_ITEM*16; - - /* The variables 'p_control' and 'control' are used to buffer control bits. */ - /* Before each group is processed, the next two bytes of the output block */ - /* are set aside for the control word for the group about to be processed. */ - /* 'p_control' is set to point to the first byte of that word. Meanwhile, */ - /* 'control' buffers the control bits being generated during the processing */ - /* of the group. Instead of having a counter to keep track of how many items */ - /* have been processed (=the number of bits in the control word), at the */ - /* start of each group, the top word of 'control' is filled with 1 bits. */ - /* As 'control' is shifted for each item, the 1 bits in the top word are */ - /* absorbed or destroyed. When they all run out (i.e. when the top word is */ - /* all zero bits, we know that we are at the end of a group. */ -# define TOPWORD 0xFFFF0000 - UBYTE *p_control; - register ULONG control=TOPWORD; - - /* THe variable 'hash' always points to the first element of the hash table. */ - UBYTE **hash= (UBYTE **) ULONG_ALIGN_UP(p_wrk_mem); - - /* The following two variables represent the literal buffer. p_h1 points to */ - /* the hash table entry corresponding to the youngest literal. p_h2 points */ - /* to the hash table entry corresponding to the second youngest literal. */ - /* Note: p_h1=0=>p_h2=0 because zero values denote absence of a pending */ - /* literal. The variables are initialized to zero meaning an empty "buffer". */ - UBYTE **p_h1=NULL; - UBYTE **p_h2=NULL; - - /* To start, we write the flag bytes. Being optimistic, we set the flag to */ - /* FLAG_COMPRESS. The remaining flag bytes are zeroed so as to keep the */ - /* algorithm deterministic. */ - *p_dst++=FLAG_COMPRESS; - {UWORD i; for (i=2;i<=FLAG_BYTES;i++) *p_dst++=0;} - - /* Reserve the first word of output as the control word for the first group. */ - /* Note: This is undone at the end if the input block is empty. */ - p_control=p_dst; p_dst+=2; - - /* Initialize all elements of the hash table to point to a constant string. */ - /* Use of an unrolled loop speeds this up considerably. */ - {UWORD i; UBYTE **p_h=hash; -# define ZH *p_h++=START_STRING_18 - for (i=0;i<256;i++) /* 256=HASH_TABLE_LENGTH/16. */ - {ZH;ZH;ZH;ZH; - ZH;ZH;ZH;ZH; - ZH;ZH;ZH;ZH; - ZH;ZH;ZH;ZH;} - } - - /* The main loop processes either 1 or 16 items per iteration. As its */ - /* termination logic is complicated, I have opted for an infinite loop */ - /* structure containing 'break' and 'goto' statements. */ - while (TRUE) - {/* Begin main processing loop. */ - - /* Note: All the variables here except unroll should be defined within */ - /* the inner loop. Unfortunately the loop hasn't got a block. */ - register UBYTE *p; /* Scans through targ phrase during matching. */ - register UBYTE *p_ziv= NULL ; /* Points to first byte of current Ziv. */ - register UWORD unroll; /* Loop counter for unrolled inner loop. */ - register UWORD index; /* Index of current hash table entry. */ - register UBYTE **p_h0 = NULL ; /* Pointer to current hash table entry. */ - - /* Test for overrun and jump to overrun code if necessary. */ - if (p_dst>p_dst_post) - goto overrun; - - /* The following cascade of if statements efficiently catches and deals */ - /* with varying degrees of closeness to the end of the input block. */ - /* When we get very close to the end, we stop updating the table and */ - /* code the remaining bytes as literals. This makes the code simpler. */ - unroll=16; - if (p_src>p_src_max16) - { - unroll=1; - if (p_src>p_src_max1) - { - if (p_src==p_src_post) - break; - else - goto literal; - } - } - - /* This inner unrolled loop processes 'unroll' (whose value is either 1 */ - /* or 16) items. I have chosen to implement this loop with labels and */ - /* gotos to heighten the ease with which the loop may be implemented with */ - /* a single decrement and branch instruction in assembly language and */ - /* also because the labels act as highly readable place markers. */ - /* (Also because we jump into the loop for endgame literals (see above)). */ - - begin_unrolled_loop: - - /* To process the next phrase, we hash the next three bytes and use */ - /* the resultant hash table index to look up the hash table. A pointer */ - /* to the entry is stored in p_h0 so as to avoid an array lookup. The */ - /* hash table entry *p_h0 is looked up yielding a pointer p to a */ - /* potential match of the Ziv in the history. */ - index=HASH(p_src); - p_h0=&hash[index]; - p=*p_h0; - - /* Having looked up the candidate position, we are in a position to */ - /* attempt a match. The match loop has been unrolled using the PS */ - /* macro so that failure within the first three bytes automatically */ - /* results in the literal branch being taken. The coding is simple. */ - /* p_ziv saves p_src so we can let p_src wander. */ -# define PS *p++!=*p_src++ - p_ziv=p_src; - if (PS || PS || PS) - { - /* Literal. */ - - /* Code the literal byte as itself and a zero control bit. */ - p_src=p_ziv; literal: *p_dst++=*p_src++; control&=0xFFFEFFFF; - - /* We have just coded a literal. If we had two pending ones, that */ - /* makes three and we can update the hash table. */ - if (p_h2!=0) - {*p_h2=p_ziv-2;} - - /* In any case, rotate the hash table pointers for next time. */ - p_h2=p_h1; p_h1=p_h0; - - } - else - { - /* Copy */ - - /* Match up to 15 remaining bytes using an unrolled loop and code. */ -#if 0 - PS || PS || PS || PS || PS || PS || PS || PS || - PS || PS || PS || PS || PS || PS || PS || p_src++; -#else - if ( - !( PS || PS || PS || PS || PS || PS || PS || PS || - PS || PS || PS || PS || PS || PS || PS ) - ) p_src++; -#endif - *p_dst++=((index&0xF00)>>4)|(--p_src-p_ziv-3); - *p_dst++=index&0xFF; - - /* As we have just coded three bytes, we are now in a position to */ - /* update the hash table with the literal bytes that were pending */ - /* upon the arrival of extra context bytes. */ - if (p_h1!=0) - { - if (p_h2) - {*p_h2=p_ziv-2; p_h2=NULL;} - *p_h1=p_ziv-1; p_h1=NULL; - } - - /* In any case, we can update the hash table based on the current */ - /* position as we just coded at least three bytes in a copy items. */ - *p_h0=p_ziv; - - } - control>>=1; - - /* This loop is all set up for a decrement and jump instruction! */ -#ifndef linux -` end_unrolled_loop: if (--unroll) goto begin_unrolled_loop; -#else - /* end_unrolled_loop: */ if (--unroll) goto begin_unrolled_loop; -#endif - - /* At this point it will nearly always be the end of a group in which */ - /* case, we have to do some control-word processing. However, near the */ - /* end of the input block, the inner unrolled loop is only executed once. */ - /* This necessitates the 'if' test. */ - if ((control&TOPWORD)==0) - { - /* Write the control word to the place we saved for it in the output. */ - *p_control++= control &0xFF; - *p_control = (control>>8) &0xFF; - - /* Reserve the next word in the output block for the control word */ - /* for the group about to be processed. */ - p_control=p_dst; p_dst+=2; - - /* Reset the control bits buffer. */ - control=TOPWORD; - } - - } /* End main processing loop. */ - - /* After the main processing loop has executed, all the input bytes have */ - /* been processed. However, the control word has still to be written to the */ - /* word reserved for it in the output at the start of the most recent group. */ - /* Before writing, the control word has to be shifted so that all the bits */ - /* are in the right place. The "empty" bit positions are filled with 1s */ - /* which partially fill the top word. */ - while(control&TOPWORD) control>>=1; - *p_control++= control &0xFF; - *p_control++=(control>>8) &0xFF; - - /* If the last group contained no items, delete the control word too. */ - if (p_control==p_dst) p_dst-=2; - - /* Write the length of the output block to the dst_len parameter and return. */ - *p_dst_len=p_dst-p_dst_first; - return; - - /* Jump here as soon as an overrun is detected. An overrun is defined to */ - /* have occurred if p_dst>p_dst_first+src_len. That is, the moment the */ - /* length of the output written so far exceeds the length of the input block.*/ - /* The algorithm checks for overruns at least at the end of each group */ - /* which means that the maximum overrun is MAX_CMP_GROUP bytes. */ - /* Once an overrun occurs, the only thing to do is to set the copy flag and */ - /* copy the input over. */ - overrun: -#if 0 - *p_dst_first=FLAG_COPY; - fast_copy(p_src_first,p_dst_first+FLAG_BYTES,src_len); - *p_dst_len=src_len+FLAG_BYTES; -#else - fast_copy(p_src_first,p_dst_first,src_len); - *p_dst_len= -src_len; /* return a negative number to indicate uncompressed data */ -#endif -} - -/******************************************************************************/ - -/* Input : Hand over the required amount of working memory in p_wrk_mem. */ -/* Input : Specify input block using p_src_first and src_len. */ -/* Input : Point p_dst_first to the start of the output zone. */ -/* Input : Point p_dst_len to a ULONG to receive the output length. */ -/* Input : Input block and output zone must not overlap. User knows */ -/* Input : upperbound on output block length from earlier compression. */ -/* Input : In any case, maximum expansion possible is nine times. */ -/* Output : Length of output block written to *p_dst_len. */ -/* Output : Output block in Mem[p_dst_first..p_dst_first+*p_dst_len-1]. */ -/* Output : Writes only in Mem[p_dst_first..p_dst_first+*p_dst_len-1]. */ -LOCAL void compress_decompress( UBYTE *p_wrk_mem, - UBYTE *p_src_first, LONG src_len, - UBYTE *p_dst_first, ULONG *p_dst_len) -{ - /* Byte pointers p_src and p_dst scan through the input and output blocks. */ - register UBYTE *p_src = p_src_first+FLAG_BYTES; - register UBYTE *p_dst = p_dst_first; - /* we need to avoid a SEGV when trying to uncompress corrupt data */ - register UBYTE *p_dst_post = p_dst_first + *p_dst_len; - - /* The following two variables are never modified and are used to control */ - /* the main loop. */ - UBYTE *p_src_post = p_src_first+src_len; - UBYTE *p_src_max16 = p_src_first+src_len-(MAX_CMP_GROUP-2); - - /* The hash table is the only resident of the working memory. The hash table */ - /* contains HASH_TABLE_LENGTH=4096 pointers to positions in the history. To */ - /* keep Macintoshes happy, it is longword aligned. */ - UBYTE **hash = (UBYTE **) ULONG_ALIGN_UP(p_wrk_mem); - - /* The variable 'control' is used to buffer the control bits which appear in */ - /* groups of 16 bits (control words) at the start of each compressed group. */ - /* When each group is read, bit 16 of the register is set to one. Whenever */ - /* a new bit is needed, the register is shifted right. When the value of the */ - /* register becomes 1, we know that we have reached the end of a group. */ - /* Initializing the register to 1 thus instructs the code to follow that it */ - /* should read a new control word immediately. */ - register ULONG control=1; - - /* The value of 'literals' is always in the range 0..3. It is the number of */ - /* consecutive literal items just seen. We have to record this number so as */ - /* to know when to update the hash table. When literals gets to 3, there */ - /* have been three consecutive literals and we can update at the position of */ - /* the oldest of the three. */ - register UWORD literals=0; - - /* Check the leading copy flag to see if the compressor chose to use a copy */ - /* operation instead of a compression operation. If a copy operation was */ - /* used, then all we need to do is copy the data over, set the output length */ - /* and return. */ -#if 0 - if (*p_src_first==FLAG_COPY) - { - fast_copy(p_src_first+FLAG_BYTES,p_dst_first,src_len-FLAG_BYTES); - *p_dst_len=src_len-FLAG_BYTES; - return; - } -#else - if ( src_len < 0 ) - { - fast_copy(p_src_first,p_dst_first,-src_len ); - *p_dst_len = (ULONG)-src_len; - return; - } -#endif - - /* Initialize all elements of the hash table to point to a constant string. */ - /* Use of an unrolled loop speeds this up considerably. */ - {UWORD i; UBYTE **p_h=hash; -# define ZJ *p_h++=START_STRING_18 - for (i=0;i<256;i++) /* 256=HASH_TABLE_LENGTH/16. */ - {ZJ;ZJ;ZJ;ZJ; - ZJ;ZJ;ZJ;ZJ; - ZJ;ZJ;ZJ;ZJ; - ZJ;ZJ;ZJ;ZJ;} - } - - /* The outer loop processes either 1 or 16 items per iteration depending on */ - /* how close p_src is to the end of the input block. */ - while (p_src!=p_src_post) - {/* Start of outer loop */ - - register UWORD unroll; /* Counts unrolled loop executions. */ - - /* When 'control' has the value 1, it means that the 16 buffered control */ - /* bits that were read in at the start of the current group have all been */ - /* shifted out and that all that is left is the 1 bit that was injected */ - /* into bit 16 at the start of the current group. When we reach the end */ - /* of a group, we have to load a new control word and inject a new 1 bit. */ - if (control==1) - { - control=0x10000|*p_src++; - control|=(*p_src++)<<8; - } - - /* If it is possible that we are within 16 groups from the end of the */ - /* input, execute the unrolled loop only once, else process a whole group */ - /* of 16 items by looping 16 times. */ - unroll= p_src<=p_src_max16 ? 16 : 1; - - /* This inner loop processes one phrase (item) per iteration. */ - while (unroll--) - { /* Begin unrolled inner loop. */ - - /* Process a literal or copy item depending on the next control bit. */ - if (control&1) - { - /* Copy item. */ - - register UBYTE *p; /* Points to place from which to copy. */ - register UWORD lenmt; /* Length of copy item minus three. */ - register UBYTE **p_hte; /* Pointer to current hash table entry.*/ - register UBYTE *p_ziv=p_dst; /* Pointer to start of current Ziv. */ - - /* Read and dismantle the copy word. Work out from where to copy. */ - lenmt=*p_src++; - p_hte=&hash[((lenmt&0xF0)<<4)|*p_src++]; - p=*p_hte; - lenmt&=0xF; - - /* Now perform the copy using a half unrolled loop. */ - *p_dst++=*p++; - *p_dst++=*p++; - *p_dst++=*p++; - while (lenmt--) - *p_dst++=*p++; - - /* Because we have just received 3 or more bytes in a copy item */ - /* (whose bytes we have just installed in the output), we are now */ - /* in a position to flush all the pending literal hashings that had */ - /* been postponed for lack of bytes. */ - if (literals>0) - { - register UBYTE *r=p_ziv-literals; - hash[HASH(r)]=r; - if (literals==2) - {r++; hash[HASH(r)]=r;} - literals=0; - } - - /* In any case, we can immediately update the hash table with the */ - /* current position. We don't need to do a HASH(...) to work out */ - /* where to put the pointer, as the compressor just told us!!! */ - *p_hte=p_ziv; - - } - else - { - /* Literal item. */ - - /* Copy over the literal byte. */ - *p_dst++=*p_src++; - - /* If we now have three literals waiting to be hashed into the hash */ - /* table, we can do one of them now (because there are three). */ - if (++literals == 3) - {register UBYTE *p=p_dst-3; hash[HASH(p)]=p; literals=2;} - } - - /* Shift the control buffer so the next control bit is in bit 0. */ - control>>=1; -#if 1 - if (p_dst > p_dst_post) - { - /* Shit: we tried to decompress corrupt data */ - *p_dst_len = 0; - return; - } -#endif - } /* End unrolled inner loop. */ - - } /* End of outer loop */ - - /* Write the length of the decompressed data before returning. */ - *p_dst_len=p_dst-p_dst_first; -} - -/******************************************************************************/ -/* End of LZRW3.C */ -/******************************************************************************/ diff --git a/drivers/char/ftape/compressor/lzrw3.h b/drivers/char/ftape/compressor/lzrw3.h deleted file mode 100644 index 533feba4752..00000000000 --- a/drivers/char/ftape/compressor/lzrw3.h +++ /dev/null @@ -1,253 +0,0 @@ -#ifndef _LZRW3_H -#define _LZRW3_H -/* - * $Source: /homes/cvs/ftape-stacked/ftape/compressor/lzrw3.h,v $ - * $Revision: 1.1 $ - * $Date: 1997/10/05 19:12:30 $ - * - * include files for lzrw3. Only slighty modified from the original - * version. Assembles the three include files compress.h, port.h and - * fastcopy.h from the original lzrw3 package. - * - */ - -#include <linux/types.h> -#include <linux/string.h> - -/******************************************************************************/ -/* */ -/* COMPRESS.H */ -/* */ -/******************************************************************************/ -/* */ -/* Author : Ross Williams. */ -/* Date : December 1989. */ -/* */ -/* This header file defines the interface to a set of functions called */ -/* 'compress', each member of which implements a particular data compression */ -/* algorithm. */ -/* */ -/* Normally in C programming, for each .H file, there is a corresponding .C */ -/* file that implements the functions promised in the .H file. */ -/* Here, there are many .C files corresponding to this header file. */ -/* Each comforming implementation file contains a single function */ -/* called 'compress' that implements a single data compression */ -/* algorithm that conforms with the interface specified in this header file. */ -/* Only one algorithm can be linked in at a time in this organization. */ -/* */ -/******************************************************************************/ -/* */ -/* DEFINITION OF FUNCTION COMPRESS */ -/* =============================== */ -/* */ -/* Summary of Function Compress */ -/* ---------------------------- */ -/* The action that 'compress' takes depends on its first argument called */ -/* 'action'. The function provides three actions: */ -/* */ -/* - Return information about the algorithm. */ -/* - Compress a block of memory. */ -/* - Decompress a block of memory. */ -/* */ -/* Parameters */ -/* ---------- */ -/* See the formal C definition later for a description of the parameters. */ -/* */ -/* Constants */ -/* --------- */ -/* COMPRESS_OVERRUN: The constant COMPRESS_OVERRUN defines by how many bytes */ -/* an algorithm is allowed to expand a block during a compression operation. */ -/* */ -/* Although compression algorithms usually compress data, there will always */ -/* be data that a given compressor will expand (this can be proven). */ -/* Fortunately, the degree of expansion can be limited to a single bit, by */ -/* copying over the input data if the data gets bigger during compression. */ -/* To allow for this possibility, the first bit of a compressed */ -/* representation can be used as a flag indicating whether the */ -/* input data was copied over, or truly compressed. In practice, the first */ -/* byte would be used to store this bit so as to maintain byte alignment. */ -/* */ -/* Unfortunately, in general, the only way to tell if an algorithm will */ -/* expand a particular block of data is to run the algorithm on the data. */ -/* If the algorithm does not continuously monitor how many output bytes it */ -/* has written, it might write an output block far larger than the input */ -/* block before realizing that it has done so. */ -/* On the other hand, continuous checks on output length are inefficient. */ -/* */ -/* To cater for all these problems, this interface definition: */ -/* > Allows a compression algorithm to return an output block that is up to */ -/* COMPRESS_OVERRUN bytes longer than the input block. */ -/* > Allows a compression algorithm to write up to COMPRESS_OVERRUN bytes */ -/* more than the length of the input block to the memory of the output */ -/* block regardless of the length of the output block eventually returned. */ -/* This allows an algorithm to overrun the length of the input block in the */ -/* output block by up to COMPRESS_OVERRUN bytes between expansion checks. */ -/* */ -/* The problem does not arise for decompression. */ -/* */ -/* Identity Action */ -/* --------------- */ -/* > action must be COMPRESS_ACTION_IDENTITY. */ -/* > p_dst_len must point to a longword to receive a longword address. */ -/* > The value of the other parameters does not matter. */ -/* > After execution, the longword that p_dst_len points to will be a pointer */ -/* to a structure of type compress_identity. */ -/* Thus, for example, after the call, (*p_dst_len)->memory will return the */ -/* number of bytes of working memory that the algorithm requires to run. */ -/* > The values of the identity structure returned are fixed constant */ -/* attributes of the algorithm and must not vary from call to call. */ -/* */ -/* Common Requirements for Compression and Decompression Actions */ -/* ------------------------------------------------------------- */ -/* > wrk_mem must point to an unused block of memory of a length specified in */ -/* the algorithm's identity block. The identity block can be obtained by */ -/* making a separate call to compress, specifying the identity action. */ -/* > The INPUT BLOCK is defined to be Memory[src_addr,src_addr+src_len-1]. */ -/* > dst_len will be used to denote *p_dst_len. */ -/* > dst_len is not read by compress, only written. */ -/* > The value of dst_len is defined only upon termination. */ -/* > The OUTPUT BLOCK is defined to be Memory[dst_addr,dst_addr+dst_len-1]. */ -/* */ -/* Compression Action */ -/* ------------------ */ -/* > action must be COMPRESS_ACTION_COMPRESS. */ -/* > src_len must be in the range [0,COMPRESS_MAX_ORG]. */ -/* > The OUTPUT ZONE is defined to be */ -/* Memory[dst_addr,dst_addr+src_len-1+COMPRESS_OVERRUN]. */ -/* > The function can modify any part of the output zone regardless of the */ -/* final length of the output block. */ -/* > The input block and the output zone must not overlap. */ -/* > dst_len will be in the range [0,src_len+COMPRESS_OVERRUN]. */ -/* > dst_len will be in the range [0,COMPRESS_MAX_COM] (from prev fact). */ -/* > The output block will consist of a representation of the input block. */ -/* */ -/* Decompression Action */ -/* -------------------- */ -/* > action must be COMPRESS_ACTION_DECOMPRESS. */ -/* > The input block must be the result of an earlier compression operation. */ -/* > If the previous fact is true, the following facts must also be true: */ -/* > src_len will be in the range [0,COMPRESS_MAX_COM]. */ -/* > dst_len will be in the range [0,COMPRESS_MAX_ORG]. */ -/* > The input and output blocks must not overlap. */ -/* > Only the output block is modified. */ -/* > Upon termination, the output block will consist of the bytes contained */ -/* in the input block passed to the earlier compression operation. */ -/* */ -/******************************************************************************/ - -/******************************************************************************/ -/* */ -/* PORT.H */ -/* */ -/******************************************************************************/ -/* */ -/* This module contains macro definitions and types that are likely to */ -/* change between computers. */ -/* */ -/******************************************************************************/ - -#ifndef DONE_PORT /* Only do this if not previously done. */ - - #ifdef THINK_C - #define UBYTE unsigned char /* Unsigned byte */ - #define UWORD unsigned int /* Unsigned word (2 bytes) */ - #define ULONG unsigned long /* Unsigned word (4 bytes) */ - #define BOOL unsigned char /* Boolean */ - #define FOPEN_BINARY_READ "rb" /* Mode string for binary reading. */ - #define FOPEN_BINARY_WRITE "wb" /* Mode string for binary writing. */ - #define FOPEN_TEXT_APPEND "a" /* Mode string for text appending. */ - #define REAL double /* USed for floating point stuff. */ - #endif - #if defined(LINUX) || defined(linux) - #define UBYTE __u8 /* Unsigned byte */ - #define UWORD __u16 /* Unsigned word (2 bytes) */ - #define ULONG __u32 /* Unsigned word (4 bytes) */ - #define LONG __s32 /* Signed word (4 bytes) */ - #define BOOL is not used here /* Boolean */ - #define FOPEN_BINARY_READ not used /* Mode string for binary reading. */ - #define FOPEN_BINARY_WRITE not used /* Mode string for binary writing. */ - #define FOPEN_TEXT_APPEND not used /* Mode string for text appending. */ - #define REAL not used /* USed for floating point stuff. */ - #ifndef TRUE - #define TRUE 1 - #endif - #endif - - #define DONE_PORT /* Don't do all this again. */ - #define MALLOC_FAIL NULL /* Failure status from malloc() */ - #define LOCAL static /* For non-exported routines. */ - #define EXPORT /* Signals exported function. */ - #define then /* Useful for aligning ifs. */ - -#endif - -/******************************************************************************/ -/* End of PORT.H */ -/******************************************************************************/ - -#define COMPRESS_ACTION_IDENTITY 0 -#define COMPRESS_ACTION_COMPRESS 1 -#define COMPRESS_ACTION_DECOMPRESS 2 - -#define COMPRESS_OVERRUN 1024 -#define COMPRESS_MAX_COM 0x70000000 -#define COMPRESS_MAX_ORG (COMPRESS_MAX_COM-COMPRESS_OVERRUN) - -#define COMPRESS_MAX_STRLEN 255 - -/* The following structure provides information about the algorithm. */ -/* > The top bit of id must be zero. The remaining bits must be chosen by */ -/* the author of the algorithm by tossing a coin 31 times. */ -/* > The amount of memory requested by the algorithm is specified in bytes */ -/* and must be in the range [0,0x70000000]. */ -/* > All strings s must be such that strlen(s)<=COMPRESS_MAX_STRLEN. */ -struct compress_identity - { - ULONG id; /* Identifying number of algorithm. */ - ULONG memory; /* Number of bytes of working memory required. */ - - char *name; /* Name of algorithm. */ - char *version; /* Version number. */ - char *date; /* Date of release of this version. */ - char *copyright; /* Copyright message. */ - - char *author; /* Author of algorithm. */ - char *affiliation; /* Affiliation of author. */ - char *vendor; /* Where the algorithm can be obtained. */ - }; - -void lzrw3_compress( /* Single function interface to compression algorithm. */ -UWORD action, /* Action to be performed. */ -UBYTE *wrk_mem, /* Working memory temporarily given to routine to use. */ -UBYTE *src_adr, /* Address of input data. */ -LONG src_len, /* Length of input data. */ -UBYTE *dst_adr, /* Address of output data. */ -void *p_dst_len /* Pointer to a longword where routine will write: */ - /* If action=..IDENTITY => Adr of id structure. */ - /* If action=..COMPRESS => Length of output data. */ - /* If action=..DECOMPRESS => Length of output data. */ -); - -/******************************************************************************/ -/* End of COMPRESS.H */ -/******************************************************************************/ - - -/******************************************************************************/ -/* fast_copy.h */ -/******************************************************************************/ - -/* This function copies a block of memory very quickly. */ -/* The exact speed depends on the relative alignment of the blocks of memory. */ -/* PRE : 0<=src_len<=(2^32)-1 . */ -/* PRE : Source and destination blocks must not overlap. */ -/* POST : MEM[dst_adr,dst_adr+src_len-1]=MEM[src_adr,src_adr+src_len-1]. */ -/* POST : MEM[dst_adr,dst_adr+src_len-1] is the only memory changed. */ - -#define fast_copy(src,dst,len) memcpy(dst,src,len) - -/******************************************************************************/ -/* End of fast_copy.h */ -/******************************************************************************/ - -#endif diff --git a/drivers/char/ftape/compressor/zftape-compress.c b/drivers/char/ftape/compressor/zftape-compress.c deleted file mode 100644 index 65ffc0be3df..00000000000 --- a/drivers/char/ftape/compressor/zftape-compress.c +++ /dev/null @@ -1,1203 +0,0 @@ -/* - * Copyright (C) 1994-1997 Claus-Justus Heine - - This program is free software; you can redistribute it and/or - modify it under the terms of the GNU General Public License as - published by the Free Software Foundation; either version 2, or (at - your option) any later version. - - This program is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; see the file COPYING. If not, write to - the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, - USA. - - * - * This file implements a "generic" interface between the * - * zftape-driver and a compression-algorithm. The * - * compression-algorithm currently used is a LZ77. I use the * - * implementation lzrw3 by Ross N. Williams (Renaissance * - * Software). The compression program itself is in the file - * lzrw3.c * and lzrw3.h. To adopt another compression algorithm - * the functions * zft_compress() and zft_uncompress() must be - * changed * appropriately. See below. - */ - -#include <linux/errno.h> -#include <linux/mm.h> -#include <linux/module.h> - -#include <linux/zftape.h> - -#include <asm/uaccess.h> - -#include "../zftape/zftape-init.h" -#include "../zftape/zftape-eof.h" -#include "../zftape/zftape-ctl.h" -#include "../zftape/zftape-write.h" -#include "../zftape/zftape-read.h" -#include "../zftape/zftape-rw.h" -#include "../compressor/zftape-compress.h" -#include "../zftape/zftape-vtbl.h" -#include "../compressor/lzrw3.h" - -/* - * global variables - */ - -/* I handle the allocation of this buffer as a special case, because - * it's size varies depending on the tape length inserted. - */ - -/* local variables - */ -static void *zftc_wrk_mem = NULL; -static __u8 *zftc_buf = NULL; -static void *zftc_scratch_buf = NULL; - -/* compression statistics - */ -static unsigned int zftc_wr_uncompressed = 0; -static unsigned int zftc_wr_compressed = 0; -static unsigned int zftc_rd_uncompressed = 0; -static unsigned int zftc_rd_compressed = 0; - -/* forward */ -static int zftc_write(int *write_cnt, - __u8 *dst_buf, const int seg_sz, - const __u8 __user *src_buf, const int req_len, - const zft_position *pos, const zft_volinfo *volume); -static int zftc_read(int *read_cnt, - __u8 __user *dst_buf, const int to_do, - const __u8 *src_buf, const int seg_sz, - const zft_position *pos, const zft_volinfo *volume); -static int zftc_seek(unsigned int new_block_pos, - zft_position *pos, const zft_volinfo *volume, - __u8 *buffer); -static void zftc_lock (void); -static void zftc_reset (void); -static void zftc_cleanup(void); -static void zftc_stats (void); - -/* compressed segment. This conforms to QIC-80-MC, Revision K. - * - * Rev. K applies to tapes with `fixed length format' which is - * indicated by format code 2,3 and 5. See below for format code 4 and 6 - * - * 2 bytes: offset of compression segment structure - * 29k > offset >= 29k-18: data from previous segment ens in this - * segment and no compressed block starts - * in this segment - * offset == 0: data from previous segment occupies entire - * segment and continues in next segment - * n bytes: remainder from previous segment - * - * Rev. K: - * 4 bytes: 4 bytes: files set byte offset - * Post Rev. K and QIC-3020/3020: - * 8 bytes: 8 bytes: files set byte offset - * 2 bytes: byte count N (amount of data following) - * bit 15 is set if data is compressed, bit 15 is not - * set if data is uncompressed - * N bytes: data (as much as specified in the byte count) - * 2 bytes: byte count N_1 of next cluster - * N_1 bytes: data of next cluset - * 2 bytes: byte count N_2 of next cluster - * N_2 bytes: ... - * - * Note that the `N' byte count accounts only for the bytes that in the - * current segment if the cluster spans to the next segment. - */ - -typedef struct -{ - int cmpr_pos; /* actual position in compression buffer */ - int cmpr_sz; /* what is left in the compression buffer - * when copying the compressed data to the - * deblock buffer - */ - unsigned int first_block; /* location of header information in - * this segment - */ - unsigned int count; /* amount of data of current block - * contained in current segment - */ - unsigned int offset; /* offset in current segment */ - unsigned int spans:1; /* might continue in next segment */ - unsigned int uncmpr; /* 0x8000 if this block contains - * uncompressed data - */ - __s64 foffs; /* file set byte offset, same as in - * compression map segment - */ -} cmpr_info; - -static cmpr_info cseg; /* static data. Must be kept uptodate and shared by - * read, write and seek functions - */ - -#define DUMP_CMPR_INFO(level, msg, info) \ - TRACE(level, msg "\n" \ - KERN_INFO "cmpr_pos : %d\n" \ - KERN_INFO "cmpr_sz : %d\n" \ - KERN_INFO "first_block: %d\n" \ - KERN_INFO "count : %d\n" \ - KERN_INFO "offset : %d\n" \ - KERN_INFO "spans : %d\n" \ - KERN_INFO "uncmpr : 0x%04x\n" \ - KERN_INFO "foffs : " LL_X, \ - (info)->cmpr_pos, (info)->cmpr_sz, (info)->first_block, \ - (info)->count, (info)->offset, (info)->spans == 1, \ - (info)->uncmpr, LL((info)->foffs)) - -/* dispatch compression segment info, return error code - * - * afterwards, cseg->offset points to start of data of the NEXT - * compressed block, and cseg->count contains the amount of data - * left in the actual compressed block. cseg->spans is set to 1 if - * the block is continued in the following segment. Otherwise it is - * set to 0. - */ -static int get_cseg (cmpr_info *cinfo, const __u8 *buff, - const unsigned int seg_sz, - const zft_volinfo *volume) -{ - TRACE_FUN(ft_t_flow); - - cinfo->first_block = GET2(buff, 0); - if (cinfo->first_block == 0) { /* data spans to next segment */ - cinfo->count = seg_sz - sizeof(__u16); - cinfo->offset = seg_sz; - cinfo->spans = 1; - } else { /* cluster definetely ends in this segment */ - if (cinfo->first_block > seg_sz) { - /* data corrupted */ - TRACE_ABORT(-EIO, ft_t_err, "corrupted data:\n" - KERN_INFO "segment size: %d\n" - KERN_INFO "first block : %d", - seg_sz, cinfo->first_block); - } - cinfo->count = cinfo->first_block - sizeof(__u16); - cinfo->offset = cinfo->first_block; - cinfo->spans = 0; - } - /* now get the offset the first block should have in the - * uncompressed data stream. - * - * For this magic `18' refer to CRF-3 standard or QIC-80MC, - * Rev. K. - */ - if ((seg_sz - cinfo->offset) > 18) { - if (volume->qic113) { /* > revision K */ - TRACE(ft_t_data_flow, "New QIC-113 compliance"); - cinfo->foffs = GET8(buff, cinfo->offset); - cinfo->offset += sizeof(__s64); - } else { - TRACE(/* ft_t_data_flow */ ft_t_noise, "pre QIC-113 version"); - cinfo->foffs = (__s64)GET4(buff, cinfo->offset); - cinfo->offset += sizeof(__u32); - } - } - if (cinfo->foffs > volume->size) { - TRACE_ABORT(-EIO, ft_t_err, "Inconsistency:\n" - KERN_INFO "offset in current volume: %d\n" - KERN_INFO "size of current volume : %d", - (int)(cinfo->foffs>>10), (int)(volume->size>>10)); - } - if (cinfo->cmpr_pos + cinfo->count > volume->blk_sz) { - TRACE_ABORT(-EIO, ft_t_err, "Inconsistency:\n" - KERN_INFO "block size : %d\n" - KERN_INFO "data record: %d", - volume->blk_sz, cinfo->cmpr_pos + cinfo->count); - } - DUMP_CMPR_INFO(ft_t_noise /* ft_t_any */, "", cinfo); - TRACE_EXIT 0; -} - -/* This one is called, when a new cluster starts in same segment. - * - * Note: if this is the first cluster in the current segment, we must - * not check whether there are more than 18 bytes available because - * this have already been done in get_cseg() and there may be less - * than 18 bytes available due to header information. - * - */ -static void get_next_cluster(cmpr_info *cluster, const __u8 *buff, - const int seg_sz, const int finish) -{ - TRACE_FUN(ft_t_flow); - - if (seg_sz - cluster->offset > 18 || cluster->foffs != 0) { - cluster->count = GET2(buff, cluster->offset); - cluster->uncmpr = cluster->count & 0x8000; - cluster->count -= cluster->uncmpr; - cluster->offset += sizeof(__u16); - cluster->foffs = 0; - if ((cluster->offset + cluster->count) < seg_sz) { - cluster->spans = 0; - } else if (cluster->offset + cluster->count == seg_sz) { - cluster->spans = !finish; - } else { - /* either an error or a volume written by an - * old version. If this is a data error, then we'll - * catch it later. - */ - TRACE(ft_t_data_flow, "Either error or old volume"); - cluster->spans = 1; - cluster->count = seg_sz - cluster->offset; - } - } else { - cluster->count = 0; - cluster->spans = 0; - cluster->foffs = 0; - } - DUMP_CMPR_INFO(ft_t_noise /* ft_t_any */ , "", cluster); - TRACE_EXIT; -} - -static void zftc_lock(void) -{ -} - -/* this function is needed for zftape_reset_position in zftape-io.c - */ -static void zftc_reset(void) -{ - TRACE_FUN(ft_t_flow); - - memset((void *)&cseg, '\0', sizeof(cseg)); - zftc_stats(); - TRACE_EXIT; -} - -static int cmpr_mem_initialized = 0; -static unsigned int alloc_blksz = 0; - -static int zft_allocate_cmpr_mem(unsigned int blksz) -{ - TRACE_FUN(ft_t_flow); - - if (cmpr_mem_initialized && blksz == alloc_blksz) { - TRACE_EXIT 0; - } - TRACE_CATCH(zft_vmalloc_once(&zftc_wrk_mem, CMPR_WRK_MEM_SIZE), - zftc_cleanup()); - TRACE_CATCH(zft_vmalloc_always(&zftc_buf, blksz + CMPR_OVERRUN), - zftc_cleanup()); - alloc_blksz = blksz; - TRACE_CATCH(zft_vmalloc_always(&zftc_scratch_buf, blksz+CMPR_OVERRUN), - zftc_cleanup()); - cmpr_mem_initialized = 1; - TRACE_EXIT 0; -} - -static void zftc_cleanup(void) -{ - TRACE_FUN(ft_t_flow); - - zft_vfree(&zftc_wrk_mem, CMPR_WRK_MEM_SIZE); - zft_vfree(&zftc_buf, alloc_blksz + CMPR_OVERRUN); - zft_vfree(&zftc_scratch_buf, alloc_blksz + CMPR_OVERRUN); - cmpr_mem_initialized = alloc_blksz = 0; - TRACE_EXIT; -} - -/***************************************************************************** - * * - * The following two functions "ftape_compress()" and * - * "ftape_uncompress()" are the interface to the actual compression * - * algorithm (i.e. they are calling the "compress()" function from * - * the lzrw3 package for now). These routines could quite easily be * - * changed to adopt another compression algorithm instead of lzrw3, * - * which currently is used. * - * * - *****************************************************************************/ - -/* called by zft_compress_write() to perform the compression. Must - * return the size of the compressed data. - * - * NOTE: The size of the compressed data should not exceed the size of - * the uncompressed data. Most compression algorithms have means - * to store data unchanged if the "compressed" data amount would - * exceed the original one. Mostly this is done by storing some - * flag-bytes in front of the compressed data to indicate if it - * is compressed or not. Thus the worst compression result - * length is the original length plus those flag-bytes. - * - * We don't want that, as the QIC-80 standard provides a means - * of marking uncompressed blocks by simply setting bit 15 of - * the compressed block's length. Thus a compessed block can - * have at most a length of 2^15-1 bytes. The QIC-80 standard - * restricts the block-length even further, allowing only 29k - - * 6 bytes. - * - * Currently, the maximum blocksize used by zftape is 28k. - * - * In short: don't exceed the length of the input-package, set - * bit 15 of the compressed size to 1 if you have copied data - * instead of compressing it. - */ -static int zft_compress(__u8 *in_buffer, unsigned int in_sz, __u8 *out_buffer) -{ - __s32 compressed_sz; - TRACE_FUN(ft_t_flow); - - - lzrw3_compress(COMPRESS_ACTION_COMPRESS, zftc_wrk_mem, - in_buffer, in_sz, out_buffer, &compressed_sz); - if (TRACE_LEVEL >= ft_t_info) { - /* the compiler will optimize this away when - * compiled with NO_TRACE_AT_ALL option - */ - TRACE(ft_t_data_flow, "\n" - KERN_INFO "before compression: %d bytes\n" - KERN_INFO "after compresison : %d bytes", - in_sz, - (int)(compressed_sz < 0 - ? -compressed_sz : compressed_sz)); - /* for statistical purposes - */ - zftc_wr_compressed += (compressed_sz < 0 - ? -compressed_sz : compressed_sz); - zftc_wr_uncompressed += in_sz; - } - TRACE_EXIT (int)compressed_sz; -} - -/* called by zft_compress_read() to decompress the data. Must - * return the size of the decompressed data for sanity checks - * (compared with zft_blk_sz) - * - * NOTE: Read the note for zft_compress() above! If bit 15 of the - * parameter in_sz is set, then the data in in_buffer isn't - * compressed, which must be handled by the un-compression - * algorithm. (I changed lzrw3 to handle this.) - * - * The parameter max_out_sz is needed to prevent buffer overruns when - * uncompressing corrupt data. - */ -static unsigned int zft_uncompress(__u8 *in_buffer, - int in_sz, - __u8 *out_buffer, - unsigned int max_out_sz) -{ - TRACE_FUN(ft_t_flow); - - lzrw3_compress(COMPRESS_ACTION_DECOMPRESS, zftc_wrk_mem, - in_buffer, (__s32)in_sz, - out_buffer, (__u32 *)&max_out_sz); - - if (TRACE_LEVEL >= ft_t_info) { - TRACE(ft_t_data_flow, "\n" - KERN_INFO "before decompression: %d bytes\n" - KERN_INFO "after decompression : %d bytes", - in_sz < 0 ? -in_sz : in_sz,(int)max_out_sz); - /* for statistical purposes - */ - zftc_rd_compressed += in_sz < 0 ? -in_sz : in_sz; - zftc_rd_uncompressed += max_out_sz; - } - TRACE_EXIT (unsigned int)max_out_sz; -} - -/* print some statistics about the efficiency of the compression to - * the kernel log - */ -static void zftc_stats(void) -{ - TRACE_FUN(ft_t_flow); - - if (TRACE_LEVEL < ft_t_info) { - TRACE_EXIT; - } - if (zftc_wr_uncompressed != 0) { - if (zftc_wr_compressed > (1<<14)) { - TRACE(ft_t_info, "compression statistics (writing):\n" - KERN_INFO " compr./uncmpr. : %3d %%", - (((zftc_wr_compressed>>10) * 100) - / (zftc_wr_uncompressed>>10))); - } else { - TRACE(ft_t_info, "compression statistics (writing):\n" - KERN_INFO " compr./uncmpr. : %3d %%", - ((zftc_wr_compressed * 100) - / zftc_wr_uncompressed)); - } - } - if (zftc_rd_uncompressed != 0) { - if (zftc_rd_compressed > (1<<14)) { - TRACE(ft_t_info, "compression statistics (reading):\n" - KERN_INFO " compr./uncmpr. : %3d %%", - (((zftc_rd_compressed>>10) * 100) - / (zftc_rd_uncompressed>>10))); - } else { - TRACE(ft_t_info, "compression statistics (reading):\n" - KERN_INFO " compr./uncmpr. : %3d %%", - ((zftc_rd_compressed * 100) - / zftc_rd_uncompressed)); - } - } - /* only print it once: */ - zftc_wr_uncompressed = - zftc_wr_compressed = - zftc_rd_uncompressed = - zftc_rd_compressed = 0; - TRACE_EXIT; -} - -/* start new compressed block - */ -static int start_new_cseg(cmpr_info *cluster, - char *dst_buf, - const zft_position *pos, - const unsigned int blk_sz, - const char *src_buf, - const int this_segs_sz, - const int qic113) -{ - int size_left; - int cp_cnt; - int buf_pos; - TRACE_FUN(ft_t_flow); - - size_left = this_segs_sz - sizeof(__u16) - cluster->cmpr_sz; - TRACE(ft_t_data_flow,"\n" - KERN_INFO "segment size : %d\n" - KERN_INFO "compressed_sz: %d\n" - KERN_INFO "size_left : %d", - this_segs_sz, cluster->cmpr_sz, size_left); - if (size_left > 18) { /* start a new cluseter */ - cp_cnt = cluster->cmpr_sz; - cluster->cmpr_sz = 0; - buf_pos = cp_cnt + sizeof(__u16); - PUT2(dst_buf, 0, buf_pos); - - if (qic113) { - __s64 foffs = pos->volume_pos; - if (cp_cnt) foffs += (__s64)blk_sz; - - TRACE(ft_t_data_flow, "new style QIC-113 header"); - PUT8(dst_buf, buf_pos, foffs); - buf_pos += sizeof(__s64); - } else { - __u32 foffs = (__u32)pos->volume_pos; - if (cp_cnt) foffs += (__u32)blk_sz; - - TRACE(ft_t_data_flow, "old style QIC-80MC header"); - PUT4(dst_buf, buf_pos, foffs); - buf_pos += sizeof(__u32); - } - } else if (size_left >= 0) { - cp_cnt = cluster->cmpr_sz; - cluster->cmpr_sz = 0; - buf_pos = cp_cnt + sizeof(__u16); - PUT2(dst_buf, 0, buf_pos); - /* zero unused part of segment. */ - memset(dst_buf + buf_pos, '\0', size_left); - buf_pos = this_segs_sz; - } else { /* need entire segment and more space */ - PUT2(dst_buf, 0, 0); - cp_cnt = this_segs_sz - sizeof(__u16); - cluster->cmpr_sz -= cp_cnt; - buf_pos = this_segs_sz; - } - memcpy(dst_buf + sizeof(__u16), src_buf + cluster->cmpr_pos, cp_cnt); - cluster->cmpr_pos += cp_cnt; - TRACE_EXIT buf_pos; -} - -/* return-value: the number of bytes removed from the user-buffer - * `src_buf' or error code - * - * int *write_cnt : how much actually has been moved to the - * dst_buf. Need not be initialized when - * function returns with an error code - * (negativ return value) - * __u8 *dst_buf : kernel space buffer where the has to be - * copied to. The contents of this buffers - * goes to a specific segment. - * const int seg_sz : the size of the segment dst_buf will be - * copied to. - * const zft_position *pos : struct containing the coordinates in - * the current volume (byte position, - * segment id of current segment etc) - * const zft_volinfo *volume: information about the current volume, - * size etc. - * const __u8 *src_buf : user space buffer that contains the - * data the user wants to be written to - * tape. - * const int req_len : the amount of data the user wants to be - * written to tape. - */ -static int zftc_write(int *write_cnt, - __u8 *dst_buf, const int seg_sz, - const __u8 __user *src_buf, const int req_len, - const zft_position *pos, const zft_volinfo *volume) -{ - int req_len_left = req_len; - int result; - int len_left; - int buf_pos_write = pos->seg_byte_pos; - TRACE_FUN(ft_t_flow); - - /* Note: we do not unlock the module because - * there are some values cached in that `cseg' variable. We - * don't don't want to use this information when being - * unloaded by kerneld even when the tape is full or when we - * cannot allocate enough memory. - */ - if (pos->tape_pos > (volume->size-volume->blk_sz-ZFT_CMPR_OVERHEAD)) { - TRACE_EXIT -ENOSPC; - } - if (zft_allocate_cmpr_mem(volume->blk_sz) < 0) { - /* should we unlock the module? But it shouldn't - * be locked anyway ... - */ - TRACE_EXIT -ENOMEM; - } - if (buf_pos_write == 0) { /* fill a new segment */ - *write_cnt = buf_pos_write = start_new_cseg(&cseg, - dst_buf, - pos, - volume->blk_sz, - zftc_buf, - seg_sz, - volume->qic113); - if (cseg.cmpr_sz == 0 && cseg.cmpr_pos != 0) { - req_len_left -= result = volume->blk_sz; - cseg.cmpr_pos = 0; - } else { - result = 0; - } - } else { - *write_cnt = result = 0; - } - - len_left = seg_sz - buf_pos_write; - while ((req_len_left > 0) && (len_left > 18)) { - /* now we have some size left for a new compressed - * block. We know, that the compression buffer is - * empty (else there wouldn't be any space left). - */ - if (copy_from_user(zftc_scratch_buf, src_buf + result, - volume->blk_sz) != 0) { - TRACE_EXIT -EFAULT; - } - req_len_left -= volume->blk_sz; - cseg.cmpr_sz = zft_compress(zftc_scratch_buf, volume->blk_sz, - zftc_buf); - if (cseg.cmpr_sz < 0) { - cseg.uncmpr = 0x8000; - cseg.cmpr_sz = -cseg.cmpr_sz; - } else { - cseg.uncmpr = 0; - } - /* increment "result" iff we copied the entire - * compressed block to the zft_deblock_buf - */ - len_left -= sizeof(__u16); - if (len_left >= cseg.cmpr_sz) { - len_left -= cseg.count = cseg.cmpr_sz; - cseg.cmpr_pos = cseg.cmpr_sz = 0; - result += volume->blk_sz; - } else { - cseg.cmpr_sz -= - cseg.cmpr_pos = - cseg.count = len_left; - len_left = 0; - } - PUT2(dst_buf, buf_pos_write, cseg.uncmpr | cseg.count); - buf_pos_write += sizeof(__u16); - memcpy(dst_buf + buf_pos_write, zftc_buf, cseg.count); - buf_pos_write += cseg.count; - *write_cnt += cseg.count + sizeof(__u16); - FT_SIGNAL_EXIT(_DONT_BLOCK); - } - /* erase the remainder of the segment if less than 18 bytes - * left (18 bytes is due to the QIC-80 standard) - */ - if (len_left <= 18) { - memset(dst_buf + buf_pos_write, '\0', len_left); - (*write_cnt) += len_left; - } - TRACE(ft_t_data_flow, "returning %d", result); - TRACE_EXIT result; -} - -/* out: - * - * int *read_cnt: the number of bytes we removed from the zft_deblock_buf - * (result) - * int *to_do : the remaining size of the read-request. - * - * in: - * - * char *buff : buff is the address of the upper part of the user - * buffer, that hasn't been filled with data yet. - - * int buf_pos_read : copy of from _ftape_read() - * int buf_len_read : copy of buf_len_rd from _ftape_read() - * char *zft_deblock_buf: zft_deblock_buf - * unsigned short blk_sz: the block size valid for this volume, may differ - * from zft_blk_sz. - * int finish: if != 0 means that this is the last segment belonging - * to this volume - * returns the amount of data actually copied to the user-buffer - * - * to_do MUST NOT SHRINK except to indicate an EOF. In this case *to_do has to - * be set to 0 - */ -static int zftc_read (int *read_cnt, - __u8 __user *dst_buf, const int to_do, - const __u8 *src_buf, const int seg_sz, - const zft_position *pos, const zft_volinfo *volume) -{ - int uncompressed_sz; - int result = 0; - int remaining = to_do; - TRACE_FUN(ft_t_flow); - - TRACE_CATCH(zft_allocate_cmpr_mem(volume->blk_sz),); - if (pos->seg_byte_pos == 0) { - /* new segment just read - */ - TRACE_CATCH(get_cseg(&cseg, src_buf, seg_sz, volume), - *read_cnt = 0); - memcpy(zftc_buf + cseg.cmpr_pos, src_buf + sizeof(__u16), - cseg.count); - cseg.cmpr_pos += cseg.count; - *read_cnt = cseg.offset; - DUMP_CMPR_INFO(ft_t_noise /* ft_t_any */, "", &cseg); - } else { - *read_cnt = 0; - } - /* loop and uncompress until user buffer full or - * deblock-buffer empty - */ - TRACE(ft_t_data_flow, "compressed_sz: %d, compos : %d, *read_cnt: %d", - cseg.cmpr_sz, cseg.cmpr_pos, *read_cnt); - while ((cseg.spans == 0) && (remaining > 0)) { - if (cseg.cmpr_pos != 0) { /* cmpr buf is not empty */ - uncompressed_sz = - zft_uncompress(zftc_buf, - cseg.uncmpr == 0x8000 ? - -cseg.cmpr_pos : cseg.cmpr_pos, - zftc_scratch_buf, - volume->blk_sz); - if (uncompressed_sz != volume->blk_sz) { - *read_cnt = 0; - TRACE_ABORT(-EIO, ft_t_warn, - "Uncompressed blk (%d) != blk size (%d)", - uncompressed_sz, volume->blk_sz); - } - if (copy_to_user(dst_buf + result, - zftc_scratch_buf, - uncompressed_sz) != 0 ) { - TRACE_EXIT -EFAULT; - } - remaining -= uncompressed_sz; - result += uncompressed_sz; - cseg.cmpr_pos = 0; - } - if (remaining > 0) { - get_next_cluster(&cseg, src_buf, seg_sz, - volume->end_seg == pos->seg_pos); - if (cseg.count != 0) { - memcpy(zftc_buf, src_buf + cseg.offset, - cseg.count); - cseg.cmpr_pos = cseg.count; - cseg.offset += cseg.count; - *read_cnt += cseg.count + sizeof(__u16); - } else { - remaining = 0; - } - } - TRACE(ft_t_data_flow, "\n" - KERN_INFO "compressed_sz: %d\n" - KERN_INFO "compos : %d\n" - KERN_INFO "*read_cnt : %d", - cseg.cmpr_sz, cseg.cmpr_pos, *read_cnt); - } - if (seg_sz - cseg.offset <= 18) { - *read_cnt += seg_sz - cseg.offset; - TRACE(ft_t_data_flow, "expanding read cnt to: %d", *read_cnt); - } - TRACE(ft_t_data_flow, "\n" - KERN_INFO "segment size : %d\n" - KERN_INFO "read count : %d\n" - KERN_INFO "buf_pos_read : %d\n" - KERN_INFO "remaining : %d", - seg_sz, *read_cnt, pos->seg_byte_pos, - seg_sz - *read_cnt - pos->seg_byte_pos); - TRACE(ft_t_data_flow, "returning: %d", result); - TRACE_EXIT result; -} - -/* seeks to the new data-position. Reads sometimes a segment. - * - * start_seg and end_seg give the boundaries of the current volume - * blk_sz is the blk_sz of the current volume as stored in the - * volume label - * - * We don't allow blocksizes less than 1024 bytes, therefore we don't need - * a 64 bit argument for new_block_pos. - */ - -static int seek_in_segment(const unsigned int to_do, cmpr_info *c_info, - const char *src_buf, const int seg_sz, - const int seg_pos, const zft_volinfo *volume); -static int slow_seek_forward_until_error(const unsigned int distance, - cmpr_info *c_info, zft_position *pos, - const zft_volinfo *volume, __u8 *buf); -static int search_valid_segment(unsigned int segment, - const unsigned int end_seg, - const unsigned int max_foffs, - zft_position *pos, cmpr_info *c_info, - const zft_volinfo *volume, __u8 *buf); -static int slow_seek_forward(unsigned int dest, cmpr_info *c_info, - zft_position *pos, const zft_volinfo *volume, - __u8 *buf); -static int compute_seg_pos(unsigned int dest, zft_position *pos, - const zft_volinfo *volume); - -#define ZFT_SLOW_SEEK_THRESHOLD 10 /* segments */ -#define ZFT_FAST_SEEK_MAX_TRIALS 10 /* times */ -#define ZFT_FAST_SEEK_BACKUP 10 /* segments */ - -static int zftc_seek(unsigned int new_block_pos, - zft_position *pos, const zft_volinfo *volume, __u8 *buf) -{ - unsigned int dest; - int limit; - int distance; - int result = 0; - int seg_dist; - int new_seg; - int old_seg = 0; - int fast_seek_trials = 0; - TRACE_FUN(ft_t_flow); - - if (new_block_pos == 0) { - pos->seg_pos = volume->start_seg; - pos->seg_byte_pos = 0; - pos->volume_pos = 0; - zftc_reset(); - TRACE_EXIT 0; - } - dest = new_block_pos * (volume->blk_sz >> 10); - distance = dest - (pos->volume_pos >> 10); - while (distance != 0) { - seg_dist = compute_seg_pos(dest, pos, volume); - TRACE(ft_t_noise, "\n" - KERN_INFO "seg_dist: %d\n" - KERN_INFO "distance: %d\n" - KERN_INFO "dest : %d\n" - KERN_INFO "vpos : %d\n" - KERN_INFO "seg_pos : %d\n" - KERN_INFO "trials : %d", - seg_dist, distance, dest, - (unsigned int)(pos->volume_pos>>10), pos->seg_pos, - fast_seek_trials); - if (distance > 0) { - if (seg_dist < 0) { - TRACE(ft_t_bug, "BUG: distance %d > 0, " - "segment difference %d < 0", - distance, seg_dist); - result = -EIO; - break; - } - new_seg = pos->seg_pos + seg_dist; - if (new_seg > volume->end_seg) { - new_seg = volume->end_seg; - } - if (old_seg == new_seg || /* loop */ - seg_dist <= ZFT_SLOW_SEEK_THRESHOLD || - fast_seek_trials >= ZFT_FAST_SEEK_MAX_TRIALS) { - TRACE(ft_t_noise, "starting slow seek:\n" - KERN_INFO "fast seek failed too often: %s\n" - KERN_INFO "near target position : %s\n" - KERN_INFO "looping between two segs : %s", - (fast_seek_trials >= - ZFT_FAST_SEEK_MAX_TRIALS) - ? "yes" : "no", - (seg_dist <= ZFT_SLOW_SEEK_THRESHOLD) - ? "yes" : "no", - (old_seg == new_seg) - ? "yes" : "no"); - result = slow_seek_forward(dest, &cseg, - pos, volume, buf); - break; - } - old_seg = new_seg; - limit = volume->end_seg; - fast_seek_trials ++; - for (;;) { - result = search_valid_segment(new_seg, limit, - volume->size, - pos, &cseg, - volume, buf); - if (result == 0 || result == -EINTR) { - break; - } - if (new_seg == volume->start_seg) { - result = -EIO; /* set errror - * condition - */ - break; - } - limit = new_seg; - new_seg -= ZFT_FAST_SEEK_BACKUP; - if (new_seg < volume->start_seg) { - new_seg = volume->start_seg; - } - } - if (result < 0) { - TRACE(ft_t_warn, - "Couldn't find a readable segment"); - break; - } - } else /* if (distance < 0) */ { - if (seg_dist > 0) { - TRACE(ft_t_bug, "BUG: distance %d < 0, " - "segment difference %d >0", - distance, seg_dist); - result = -EIO; - break; - } - new_seg = pos->seg_pos + seg_dist; - if (fast_seek_trials > 0 && seg_dist == 0) { - /* this avoids sticking to the same - * segment all the time. On the other hand: - * if we got here for the first time, and the - * deblock_buffer still contains a valid - * segment, then there is no need to skip to - * the previous segment if the desired position - * is inside this segment. - */ - new_seg --; - } - if (new_seg < volume->start_seg) { - new_seg = volume->start_seg; - } - limit = pos->seg_pos; - fast_seek_trials ++; - for (;;) { - result = search_valid_segment(new_seg, limit, - pos->volume_pos, - pos, &cseg, - volume, buf); - if (result == 0 || result == -EINTR) { - break; - } - if (new_seg == volume->start_seg) { - result = -EIO; /* set errror - * condition - */ - break; - } - limit = new_seg; - new_seg -= ZFT_FAST_SEEK_BACKUP; - if (new_seg < volume->start_seg) { - new_seg = volume->start_seg; - } - } - if (result < 0) { - TRACE(ft_t_warn, - "Couldn't find a readable segment"); - break; - } - } - distance = dest - (pos->volume_pos >> 10); - } - TRACE_EXIT result; -} - - -/* advance inside the given segment at most to_do bytes. - * of kilobytes moved - */ - -static int seek_in_segment(const unsigned int to_do, - cmpr_info *c_info, - const char *src_buf, - const int seg_sz, - const int seg_pos, - const zft_volinfo *volume) -{ - int result = 0; - int blk_sz = volume->blk_sz >> 10; - int remaining = to_do; - TRACE_FUN(ft_t_flow); - - if (c_info->offset == 0) { - /* new segment just read - */ - TRACE_CATCH(get_cseg(c_info, src_buf, seg_sz, volume),); - c_info->cmpr_pos += c_info->count; - DUMP_CMPR_INFO(ft_t_noise, "", c_info); - } - /* loop and uncompress until user buffer full or - * deblock-buffer empty - */ - TRACE(ft_t_noise, "compressed_sz: %d, compos : %d", - c_info->cmpr_sz, c_info->cmpr_pos); - while (c_info->spans == 0 && remaining > 0) { - if (c_info->cmpr_pos != 0) { /* cmpr buf is not empty */ - result += blk_sz; - remaining -= blk_sz; - c_info->cmpr_pos = 0; - } - if (remaining > 0) { - get_next_cluster(c_info, src_buf, seg_sz, - volume->end_seg == seg_pos); - if (c_info->count != 0) { - c_info->cmpr_pos = c_info->count; - c_info->offset += c_info->count; - } else { - break; - } - } - /* Allow escape from this loop on signal! - */ - FT_SIGNAL_EXIT(_DONT_BLOCK); - DUMP_CMPR_INFO(ft_t_noise, "", c_info); - TRACE(ft_t_noise, "to_do: %d", remaining); - } - if (seg_sz - c_info->offset <= 18) { - c_info->offset = seg_sz; - } - TRACE(ft_t_noise, "\n" - KERN_INFO "segment size : %d\n" - KERN_INFO "buf_pos_read : %d\n" - KERN_INFO "remaining : %d", - seg_sz, c_info->offset, - seg_sz - c_info->offset); - TRACE_EXIT result; -} - -static int slow_seek_forward_until_error(const unsigned int distance, - cmpr_info *c_info, - zft_position *pos, - const zft_volinfo *volume, - __u8 *buf) -{ - unsigned int remaining = distance; - int seg_sz; - int seg_pos; - int result; - TRACE_FUN(ft_t_flow); - - seg_pos = pos->seg_pos; - do { - TRACE_CATCH(seg_sz = zft_fetch_segment(seg_pos, buf, - FT_RD_AHEAD),); - /* now we have the contents of the actual segment in - * the deblock buffer - */ - TRACE_CATCH(result = seek_in_segment(remaining, c_info, buf, - seg_sz, seg_pos,volume),); - remaining -= result; - pos->volume_pos += result<<10; - pos->seg_pos = seg_pos; - pos->seg_byte_pos = c_info->offset; - seg_pos ++; - if (seg_pos <= volume->end_seg && c_info->offset == seg_sz) { - pos->seg_pos ++; - pos->seg_byte_pos = 0; - c_info->offset = 0; - } - /* Allow escape from this loop on signal! - */ - FT_SIGNAL_EXIT(_DONT_BLOCK); - TRACE(ft_t_noise, "\n" - KERN_INFO "remaining: %d\n" - KERN_INFO "seg_pos: %d\n" - KERN_INFO "end_seg: %d\n" - KERN_INFO "result: %d", - remaining, seg_pos, volume->end_seg, result); - } while (remaining > 0 && seg_pos <= volume->end_seg); - TRACE_EXIT 0; -} - -/* return segment id of next segment containing valid data, -EIO otherwise - */ -static int search_valid_segment(unsigned int segment, - const unsigned int end_seg, - const unsigned int max_foffs, - zft_position *pos, - cmpr_info *c_info, - const zft_volinfo *volume, - __u8 *buf) -{ - cmpr_info tmp_info; - int seg_sz; - TRACE_FUN(ft_t_flow); - - memset(&tmp_info, 0, sizeof(cmpr_info)); - while (segment <= end_seg) { - FT_SIGNAL_EXIT(_DONT_BLOCK); - TRACE(ft_t_noise, - "Searching readable segment between %d and %d", - segment, end_seg); - seg_sz = zft_fetch_segment(segment, buf, FT_RD_AHEAD); - if ((seg_sz > 0) && - (get_cseg (&tmp_info, buf, seg_sz, volume) >= 0) && - (tmp_info.foffs != 0 || segment == volume->start_seg)) { - if ((tmp_info.foffs>>10) > max_foffs) { - TRACE_ABORT(-EIO, ft_t_noise, "\n" - KERN_INFO "cseg.foff: %d\n" - KERN_INFO "dest : %d", - (int)(tmp_info.foffs >> 10), - max_foffs); - } - DUMP_CMPR_INFO(ft_t_noise, "", &tmp_info); - *c_info = tmp_info; - pos->seg_pos = segment; - pos->volume_pos = c_info->foffs; - pos->seg_byte_pos = c_info->offset; - TRACE(ft_t_noise, "found segment at %d", segment); - TRACE_EXIT 0; - } - segment++; - } - TRACE_EXIT -EIO; -} - -static int slow_seek_forward(unsigned int dest, - cmpr_info *c_info, - zft_position *pos, - const zft_volinfo *volume, - __u8 *buf) -{ - unsigned int distance; - int result = 0; - TRACE_FUN(ft_t_flow); - - distance = dest - (pos->volume_pos >> 10); - while ((distance > 0) && - (result = slow_seek_forward_until_error(distance, - c_info, - pos, - volume, - buf)) < 0) { - if (result == -EINTR) { - break; - } - TRACE(ft_t_noise, "seg_pos: %d", pos->seg_pos); - /* the failing segment is either pos->seg_pos or - * pos->seg_pos + 1. There is no need to further try - * that segment, because ftape_read_segment() already - * has tried very much to read it. So we start with - * following segment, which is pos->seg_pos + 1 - */ - if(search_valid_segment(pos->seg_pos+1, volume->end_seg, dest, - pos, c_info, - volume, buf) < 0) { - TRACE(ft_t_noise, "search_valid_segment() failed"); - result = -EIO; - break; - } - distance = dest - (pos->volume_pos >> 10); - result = 0; - TRACE(ft_t_noise, "segment: %d", pos->seg_pos); - /* found valid segment, retry the seek */ - } - TRACE_EXIT result; -} - -static int compute_seg_pos(const unsigned int dest, - zft_position *pos, - const zft_volinfo *volume) -{ - int segment; - int distance = dest - (pos->volume_pos >> 10); - unsigned int raw_size; - unsigned int virt_size; - unsigned int factor; - TRACE_FUN(ft_t_flow); - - if (distance >= 0) { - raw_size = volume->end_seg - pos->seg_pos + 1; - virt_size = ((unsigned int)(volume->size>>10) - - (unsigned int)(pos->volume_pos>>10) - + FT_SECTORS_PER_SEGMENT - FT_ECC_SECTORS - 1); - virt_size /= FT_SECTORS_PER_SEGMENT - FT_ECC_SECTORS; - if (virt_size == 0 || raw_size == 0) { - TRACE_EXIT 0; - } - if (raw_size >= (1<<25)) { - factor = raw_size/(virt_size>>7); - } else { - factor = (raw_size<<7)/virt_size; - } - segment = distance/(FT_SECTORS_PER_SEGMENT-FT_ECC_SECTORS); - segment = (segment * factor)>>7; - } else { - raw_size = pos->seg_pos - volume->start_seg + 1; - virt_size = ((unsigned int)(pos->volume_pos>>10) - + FT_SECTORS_PER_SEGMENT - FT_ECC_SECTORS - 1); - virt_size /= FT_SECTORS_PER_SEGMENT - FT_ECC_SECTORS; - if (virt_size == 0 || raw_size == 0) { - TRACE_EXIT 0; - } - if (raw_size >= (1<<25)) { - factor = raw_size/(virt_size>>7); - } else { - factor = (raw_size<<7)/virt_size; - } - segment = distance/(FT_SECTORS_PER_SEGMENT-FT_ECC_SECTORS); - } - TRACE(ft_t_noise, "factor: %d/%d", factor, 1<<7); - TRACE_EXIT segment; -} - -static struct zft_cmpr_ops cmpr_ops = { - zftc_write, - zftc_read, - zftc_seek, - zftc_lock, - zftc_reset, - zftc_cleanup -}; - -int zft_compressor_init(void) -{ - TRACE_FUN(ft_t_flow); - -#ifdef MODULE - printk(KERN_INFO "zftape compressor v1.00a 970514 for " FTAPE_VERSION "\n"); - if (TRACE_LEVEL >= ft_t_info) { - printk( -KERN_INFO "(c) 1997 Claus-Justus Heine (claus@momo.math.rwth-aachen.de)\n" -KERN_INFO "Compressor for zftape (lzrw3 algorithm)\n"); - } -#else /* !MODULE */ - /* print a short no-nonsense boot message */ - printk(KERN_INFO "zftape compressor v1.00a 970514\n"); - printk(KERN_INFO "For use with " FTAPE_VERSION "\n"); -#endif /* MODULE */ - TRACE(ft_t_info, "zft_compressor_init @ 0x%p", zft_compressor_init); - TRACE(ft_t_info, "installing compressor for zftape ..."); - TRACE_CATCH(zft_cmpr_register(&cmpr_ops),); - TRACE_EXIT 0; -} - -#ifdef MODULE - -MODULE_AUTHOR( - "(c) 1996, 1997 Claus-Justus Heine (claus@momo.math.rwth-aachen.de"); -MODULE_DESCRIPTION( -"Compression routines for zftape. Uses the lzrw3 algorithm by Ross Williams"); -MODULE_LICENSE("GPL"); - -/* Called by modules package when installing the driver - */ -int init_module(void) -{ - return zft_compressor_init(); -} - -#endif /* MODULE */ diff --git a/drivers/char/ftape/compressor/zftape-compress.h b/drivers/char/ftape/compressor/zftape-compress.h deleted file mode 100644 index f200741e33b..00000000000 --- a/drivers/char/ftape/compressor/zftape-compress.h +++ /dev/null @@ -1,83 +0,0 @@ -#ifndef _ZFTAPE_COMPRESS_H -#define _ZFTAPE_COMPRESS_H -/* - * Copyright (c) 1994-1997 Claus-Justus Heine - - This program is free software; you can redistribute it and/or - modify it under the terms of the GNU General Public License as - published by the Free Software Foundation; either version 2, or (at - your option) any later version. - - This program is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; see the file COPYING. If not, write to - the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, - USA. - - * - * $Source: /homes/cvs/ftape-stacked/ftape/compressor/zftape-compress.h,v $ - * $Revision: 1.1 $ - * $Date: 1997/10/05 19:12:32 $ - * - * This file contains macros and definitions for zftape's - * builtin compression code. - * - */ - -#include "../zftape/zftape-buffers.h" -#include "../zftape/zftape-vtbl.h" -#include "../compressor/lzrw3.h" - -/* CMPR_WRK_MEM_SIZE gives the size of the compression wrk_mem */ -/* I got these out of lzrw3.c */ -#define U(X) ((__u32) X) -#define SIZE_P_BYTE (U(sizeof(__u8 *))) -#define ALIGNMENT_FUDGE (U(16)) - -#define CMPR_WRK_MEM_SIZE (U(4096)*(SIZE_P_BYTE) + ALIGNMENT_FUDGE) - -/* the maximum number of bytes the size of the "compressed" data can - * exceed the uncompressed data. As it is quite useless to compress - * data twice it is sometimes the case that it is more efficient to - * copy a block of data but to feed it to the "compression" - * algorithm. In this case there are some flag bytes or the like - * proceding the "compressed" data. THAT MUST NOT BE THE CASE for the - * algorithm we use for this driver. Instead, the high bit 15 of - * compressed_size: - * - * compressed_size = ftape_compress() - * - * must be set in such a case. - * - * Nevertheless, it might also be as for lzrw3 that there is an - * "intermediate" overrun that exceeds the amount of the compressed - * data that is actually produced. During the algorithm we need in the - * worst case MAX_CMP_GROUP bytes more than the input-size. - */ -#define MAX_CMP_GROUP (2+16*2) /* from lzrw3.c */ - -#define CMPR_OVERRUN MAX_CMP_GROUP /* during compression */ - -/****************************************************/ - -#define CMPR_BUFFER_SIZE (MAX_BLOCK_SIZE + CMPR_OVERRUN) - -/* the compression map stores the byte offset compressed blocks within - * the current volume for catridges with format code 2,3 and 5 - * (and old versions of zftape) and the offset measured in kilobytes for - * format code 4 and 6. This gives us a possible max. size of a - * compressed volume of 1024*4GIG which should be enough. - */ -typedef __u32 CmprMap; - -/* globals - */ - -/* exported functions - */ - -#endif /* _ZFTAPE_COMPRESS_H */ diff --git a/drivers/char/ftape/lowlevel/Makefile b/drivers/char/ftape/lowlevel/Makefile deleted file mode 100644 index febab07ba42..00000000000 --- a/drivers/char/ftape/lowlevel/Makefile +++ /dev/null @@ -1,43 +0,0 @@ -# -# Copyright (C) 1996, 1997 Clau-Justus Heine. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; see the file COPYING. If not, write to -# the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. -# -# $Source: /homes/cvs/ftape-stacked/ftape/lowlevel/Makefile,v $ -# $Revision: 1.4 $ -# $Date: 1997/10/07 09:26:02 $ -# -# Makefile for the lowlevel part QIC-40/80/3010/3020 floppy-tape -# driver for Linux. -# - -obj-$(CONFIG_FTAPE) += ftape.o - -ftape-objs := ftape-init.o fdc-io.o fdc-isr.o \ - ftape-bsm.o ftape-ctl.o ftape-read.o ftape-rw.o \ - ftape-write.o ftape-io.o ftape-calibr.o ftape-ecc.o fc-10.o \ - ftape-buffer.o ftape-format.o ftape_syms.o - -ifeq ($(CONFIG_FTAPE),y) -ftape-objs += ftape-setup.o -endif - -ifndef CONFIG_FT_NO_TRACE_AT_ALL -ftape-objs += ftape-tracing.o -endif - -ifeq ($(CONFIG_FT_PROC_FS),y) -ftape-objs += ftape-proc.o -endif diff --git a/drivers/char/ftape/lowlevel/fc-10.c b/drivers/char/ftape/lowlevel/fc-10.c deleted file mode 100644 index 9bc1cddade7..00000000000 --- a/drivers/char/ftape/lowlevel/fc-10.c +++ /dev/null @@ -1,175 +0,0 @@ -/* - * - - Copyright (C) 1993,1994 Jon Tombs. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - The entire guts of this program was written by dosemu, modified to - record reads and writes to the ports in the 0x180-0x188 address space, - while running the CMS program TAPE.EXE V2.0.5 supplied with the drive. - - Modified to use an array of addresses and generally cleaned up (made - much shorter) 4 June 94, dosemu isn't that good at writing short code it - would seem :-). Made independent of 0x180, but I doubt it will work - at any other address. - - Modified for distribution with ftape source. 21 June 94, SJL. - - Modifications on 20 October 95, by Daniel Cohen (catman@wpi.edu): - Modified to support different DMA, IRQ, and IO Ports. Borland's - Turbo Debugger in virtual 8086 mode (TD386.EXE with hardware breakpoints - provided by the TDH386.SYS Device Driver) was used on the CMS program - TAPE V4.0.5. I set breakpoints on I/O to ports 0x180-0x187. Note that - CMS's program will not successfully configure the tape drive if you set - breakpoints on IO Reads, but you can set them on IO Writes without problems. - Known problems: - - You can not use DMA Channels 5 or 7. - - Modification on 29 January 96, by Daniel Cohen (catman@wpi.edu): - Modified to only accept IRQs 3 - 7, or 9. Since we can only send a 3 bit - number representing the IRQ to the card, special handling is required when - IRQ 9 is selected. IRQ 2 and 9 are the same, and we should request IRQ 9 - from the kernel while telling the card to use IRQ 2. Thanks to Greg - Crider (gcrider@iclnet.org) for finding and locating this bug, as well as - testing the patch. - - Modification on 11 December 96, by Claus Heine (claus@momo.math.rwth-aachen.de): - Modified a little to use variahle ft_fdc_base, ft_fdc_irq, ft_fdc_dma - instead of preprocessor symbols. Thus we can compile this into the module - or kernel and let the user specify the options as command line arguments. - - * - * $Source: /homes/cvs/ftape-stacked/ftape/lowlevel/fc-10.c,v $ - * $Revision: 1.2 $ - * $Date: 1997/10/05 19:18:04 $ - * - * This file contains code for the CMS FC-10/FC-20 card. - */ - -#include <asm/io.h> -#include <linux/ftape.h> -#include "../lowlevel/ftape-tracing.h" -#include "../lowlevel/fdc-io.h" -#include "../lowlevel/fc-10.h" - -static __u16 inbs_magic[] = { - 0x3, 0x3, 0x0, 0x4, 0x7, 0x2, 0x5, 0x3, 0x1, 0x4, - 0x3, 0x5, 0x2, 0x0, 0x3, 0x7, 0x4, 0x2, - 0x0, 0x1, 0x2, 0x3, 0x4, 0x5, 0x6, 0x7 -}; - -static __u16 fc10_ports[] = { - 0x180, 0x210, 0x2A0, 0x300, 0x330, 0x340, 0x370 -}; - -int fc10_enable(void) -{ - int i; - __u8 cardConfig = 0x00; - __u8 x; - TRACE_FUN(ft_t_flow); - -/* This code will only work if the FC-10 (or FC-20) is set to - * use DMA channels 1, 2, or 3. DMA channels 5 and 7 seem to be - * initialized by the same command as channels 1 and 3, respectively. - */ - if (ft_fdc_dma > 3) { - TRACE_ABORT(0, ft_t_err, -"Error: The FC-10/20 must be set to use DMA channels 1, 2, or 3!"); - } -/* Only allow the FC-10/20 to use IRQ 3-7, or 9. Note that CMS's program - * only accepts IRQ's 2-7, but in linux, IRQ 2 is the same as IRQ 9. - */ - if (ft_fdc_irq < 3 || ft_fdc_irq == 8 || ft_fdc_irq > 9) { - TRACE_ABORT(0, ft_t_err, -"Error: The FC-10/20 must be set to use IRQ levels 3 - 7, or 9!\n" -KERN_INFO "Note: IRQ 9 is the same as IRQ 2"); - } - /* Clear state machine ??? - */ - for (i = 0; i < NR_ITEMS(inbs_magic); i++) { - inb(ft_fdc_base + inbs_magic[i]); - } - outb(0x0, ft_fdc_base); - - x = inb(ft_fdc_base); - if (x == 0x13 || x == 0x93) { - for (i = 1; i < 8; i++) { - if (inb(ft_fdc_base + i) != x) { - TRACE_EXIT 0; - } - } - } else { - TRACE_EXIT 0; - } - - outb(0x8, ft_fdc_base); - - for (i = 0; i < 8; i++) { - if (inb(ft_fdc_base + i) != 0x0) { - TRACE_EXIT 0; - } - } - outb(0x10, ft_fdc_base); - - for (i = 0; i < 8; i++) { - if (inb(ft_fdc_base + i) != 0xff) { - TRACE_EXIT 0; - } - } - - /* Okay, we found a FC-10 card ! ??? - */ - outb(0x0, fdc.ccr); - - /* Clear state machine again ??? - */ - for (i = 0; i < NR_ITEMS(inbs_magic); i++) { - inb(ft_fdc_base + inbs_magic[i]); - } - /* Send io port */ - for (i = 0; i < NR_ITEMS(fc10_ports); i++) - if (ft_fdc_base == fc10_ports[i]) - cardConfig = i + 1; - if (cardConfig == 0) { - TRACE_EXIT 0; /* Invalid I/O Port */ - } - /* and IRQ - If using IRQ 9, tell the FC card it is actually IRQ 2 */ - if (ft_fdc_irq != 9) - cardConfig |= ft_fdc_irq << 3; - else - cardConfig |= 2 << 3; - - /* and finally DMA Channel */ - cardConfig |= ft_fdc_dma << 6; - outb(cardConfig, ft_fdc_base); /* DMA [2 bits]/IRQ [3 bits]/BASE [3 bits] */ - - /* Enable FC-10 ??? - */ - outb(0, fdc.ccr); - outb(0, fdc.dor2); - outb(FDC_DMA_MODE /* 8 */, fdc.dor); - outb(FDC_DMA_MODE /* 8 */, fdc.dor); - outb(1, fdc.dor2); - - /************************************* - * - * cH: why the hell should this be necessary? This is done - * by fdc_reset()!!! - * - *************************************/ - /* Initialize fdc, select drive B: - */ - outb(FDC_DMA_MODE, fdc.dor); /* assert reset, dma & irq enabled */ - /* 0x08 */ - outb(FDC_DMA_MODE|FDC_RESET_NOT, fdc.dor); /* release reset */ - /* 0x08 | 0x04 = 0x0c */ - outb(FDC_DMA_MODE|FDC_RESET_NOT|FDC_MOTOR_1|FTAPE_SEL_B, fdc.dor); - /* 0x08 | 0x04 | 0x20 | 0x01 = 0x2d */ - /* select drive 1 */ /* why not drive 0 ???? */ - TRACE_EXIT (x == 0x93) ? 2 : 1; -} diff --git a/drivers/char/ftape/lowlevel/fc-10.h b/drivers/char/ftape/lowlevel/fc-10.h deleted file mode 100644 index da7b88bca88..00000000000 --- a/drivers/char/ftape/lowlevel/fc-10.h +++ /dev/null @@ -1,39 +0,0 @@ -#ifndef _FC_10_H -#define _FC_10_H - -/* - * Copyright (C) 1994-1996 Bas Laarhoven. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; see the file COPYING. If not, write to - the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - - * - * $Source: /homes/cvs/ftape-stacked/ftape/lowlevel/fc-10.h,v $ - * $Revision: 1.1 $ - * $Date: 1997/09/19 09:05:22 $ - * - * This file contains definitions for the FC-10 code - * of the QIC-40/80 floppy-tape driver for Linux. - */ - -/* - * fc-10.c defined global vars. - */ - -/* - * fc-10.c defined global functions. - */ -extern int fc10_enable(void); - -#endif diff --git a/drivers/char/ftape/lowlevel/fdc-io.c b/drivers/char/ftape/lowlevel/fdc-io.c deleted file mode 100644 index bbcf918f056..00000000000 --- a/drivers/char/ftape/lowlevel/fdc-io.c +++ /dev/null @@ -1,1349 +0,0 @@ -/* - * Copyright (C) 1993-1996 Bas Laarhoven, - * (C) 1996-1997 Claus-Justus Heine. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; see the file COPYING. If not, write to - the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - - * - * $Source: /homes/cvs/ftape-stacked/ftape/lowlevel/fdc-io.c,v $ - * $Revision: 1.7.4.2 $ - * $Date: 1997/11/16 14:48:17 $ - * - * This file contains the low-level floppy disk interface code - * for the QIC-40/80/3010/3020 floppy-tape driver "ftape" for - * Linux. - */ - -#include <linux/errno.h> -#include <linux/sched.h> -#include <linux/ioport.h> -#include <linux/interrupt.h> -#include <linux/kernel.h> -#include <asm/system.h> -#include <asm/io.h> -#include <asm/dma.h> -#include <asm/irq.h> - -#include <linux/ftape.h> -#include <linux/qic117.h> -#include "../lowlevel/ftape-tracing.h" -#include "../lowlevel/fdc-io.h" -#include "../lowlevel/fdc-isr.h" -#include "../lowlevel/ftape-io.h" -#include "../lowlevel/ftape-rw.h" -#include "../lowlevel/ftape-ctl.h" -#include "../lowlevel/ftape-calibr.h" -#include "../lowlevel/fc-10.h" - -/* Global vars. - */ -static int ftape_motor; -volatile int ftape_current_cylinder = -1; -volatile fdc_mode_enum fdc_mode = fdc_idle; -fdc_config_info fdc; -DECLARE_WAIT_QUEUE_HEAD(ftape_wait_intr); - -unsigned int ft_fdc_base = CONFIG_FT_FDC_BASE; -unsigned int ft_fdc_irq = CONFIG_FT_FDC_IRQ; -unsigned int ft_fdc_dma = CONFIG_FT_FDC_DMA; -unsigned int ft_fdc_threshold = CONFIG_FT_FDC_THR; /* bytes */ -unsigned int ft_fdc_rate_limit = CONFIG_FT_FDC_MAX_RATE; /* bits/sec */ -int ft_probe_fc10 = CONFIG_FT_PROBE_FC10; -int ft_mach2 = CONFIG_FT_MACH2; - -/* Local vars. - */ -static spinlock_t fdc_io_lock; -static unsigned int fdc_calibr_count; -static unsigned int fdc_calibr_time; -static int fdc_status; -volatile __u8 fdc_head; /* FDC head from sector id */ -volatile __u8 fdc_cyl; /* FDC track from sector id */ -volatile __u8 fdc_sect; /* FDC sector from sector id */ -static int fdc_data_rate = 500; /* data rate (Kbps) */ -static int fdc_rate_code; /* data rate code (0 == 500 Kbps) */ -static int fdc_seek_rate = 2; /* step rate (msec) */ -static void (*do_ftape) (void); -static int fdc_fifo_state; /* original fifo setting - fifo enabled */ -static int fdc_fifo_thr; /* original fifo setting - threshold */ -static int fdc_lock_state; /* original lock setting - locked */ -static int fdc_fifo_locked; /* has fifo && lock set ? */ -static __u8 fdc_precomp; /* default precomp. value (nsec) */ -static __u8 fdc_prec_code; /* fdc precomp. select code */ - -static char ftape_id[] = "ftape"; /* used by request irq and free irq */ - -static int fdc_set_seek_rate(int seek_rate); - -void fdc_catch_stray_interrupts(int count) -{ - unsigned long flags; - - spin_lock_irqsave(&fdc_io_lock, flags); - if (count == 0) { - ft_expected_stray_interrupts = 0; - } else { - ft_expected_stray_interrupts += count; - } - spin_unlock_irqrestore(&fdc_io_lock, flags); -} - -/* Wait during a timeout period for a given FDC status. - * If usecs == 0 then just test status, else wait at least for usecs. - * Returns -ETIME on timeout. Function must be calibrated first ! - */ -static int fdc_wait(unsigned int usecs, __u8 mask, __u8 state) -{ - int count_1 = (fdc_calibr_count * usecs + - fdc_calibr_count - 1) / fdc_calibr_time; - - do { - fdc_status = inb_p(fdc.msr); - if ((fdc_status & mask) == state) { - return 0; - } - } while (count_1-- >= 0); - return -ETIME; -} - -int fdc_ready_wait(unsigned int usecs) -{ - return fdc_wait(usecs, FDC_DATA_READY | FDC_BUSY, FDC_DATA_READY); -} - -/* Why can't we just use udelay()? - */ -static void fdc_usec_wait(unsigned int usecs) -{ - fdc_wait(usecs, 0, 1); /* will always timeout ! */ -} - -static int fdc_ready_out_wait(unsigned int usecs) -{ - fdc_usec_wait(FT_RQM_DELAY); /* wait for valid RQM status */ - return fdc_wait(usecs, FDC_DATA_OUT_READY, FDC_DATA_OUT_READY); -} - -void fdc_wait_calibrate(void) -{ - ftape_calibrate("fdc_wait", - fdc_usec_wait, &fdc_calibr_count, &fdc_calibr_time); -} - -/* Wait for a (short) while for the FDC to become ready - * and transfer the next command byte. - * Return -ETIME on timeout on getting ready (depends on hardware!). - */ -static int fdc_write(const __u8 data) -{ - fdc_usec_wait(FT_RQM_DELAY); /* wait for valid RQM status */ - if (fdc_wait(150, FDC_DATA_READY_MASK, FDC_DATA_IN_READY) < 0) { - return -ETIME; - } else { - outb(data, fdc.fifo); - return 0; - } -} - -/* Wait for a (short) while for the FDC to become ready - * and transfer the next result byte. - * Return -ETIME if timeout on getting ready (depends on hardware!). - */ -static int fdc_read(__u8 * data) -{ - fdc_usec_wait(FT_RQM_DELAY); /* wait for valid RQM status */ - if (fdc_wait(150, FDC_DATA_READY_MASK, FDC_DATA_OUT_READY) < 0) { - return -ETIME; - } else { - *data = inb(fdc.fifo); - return 0; - } -} - -/* Output a cmd_len long command string to the FDC. - * The FDC should be ready to receive a new command or - * an error (EBUSY or ETIME) will occur. - */ -int fdc_command(const __u8 * cmd_data, int cmd_len) -{ - int result = 0; - unsigned long flags; - int count = cmd_len; - int retry = 0; -#ifdef TESTING - static unsigned int last_time; - unsigned int time; -#endif - TRACE_FUN(ft_t_any); - - fdc_usec_wait(FT_RQM_DELAY); /* wait for valid RQM status */ - spin_lock_irqsave(&fdc_io_lock, flags); - if (!in_interrupt()) - /* Yes, I know, too much comments inside this function - * ... - * - * Yet another bug in the original driver. All that - * havoc is caused by the fact that the isr() sends - * itself a command to the floppy tape driver (pause, - * micro step pause). Now, the problem is that - * commands are transmitted via the fdc_seek - * command. But: the fdc performs seeks in the - * background i.e. it doesn't signal busy while - * sending the step pulses to the drive. Therefore the - * non-interrupt level driver has no chance to tell - * whether the isr() just has issued a seek. Therefore - * we HAVE TO have a look at the ft_hide_interrupt - * flag: it signals the non-interrupt level part of - * the driver that it has to wait for the fdc until it - * has completet seeking. - * - * THIS WAS PRESUMABLY THE REASON FOR ALL THAT - * "fdc_read timeout" errors, I HOPE :-) - */ - if (ft_hide_interrupt) { - restore_flags(flags); - TRACE(ft_t_info, - "Waiting for the isr() completing fdc_seek()"); - if (fdc_interrupt_wait(2 * FT_SECOND) < 0) { - TRACE(ft_t_warn, - "Warning: timeout waiting for isr() seek to complete"); - } - if (ft_hide_interrupt || !ft_seek_completed) { - /* There cannot be another - * interrupt. The isr() only stops - * the tape and the next interrupt - * won't come until we have send our - * command to the drive. - */ - TRACE_ABORT(-EIO, ft_t_bug, - "BUG? isr() is still seeking?\n" - KERN_INFO "hide: %d\n" - KERN_INFO "seek: %d", - ft_hide_interrupt, - ft_seek_completed); - - } - fdc_usec_wait(FT_RQM_DELAY); /* wait for valid RQM status */ - spin_lock_irqsave(&fdc_io_lock, flags); - } - fdc_status = inb(fdc.msr); - if ((fdc_status & FDC_DATA_READY_MASK) != FDC_DATA_IN_READY) { - spin_unlock_irqrestore(&fdc_io_lock, flags); - TRACE_ABORT(-EBUSY, ft_t_err, "fdc not ready"); - } - fdc_mode = *cmd_data; /* used by isr */ -#ifdef TESTING - if (fdc_mode == FDC_SEEK) { - time = ftape_timediff(last_time, ftape_timestamp()); - if (time < 6000) { - TRACE(ft_t_bug,"Warning: short timeout between seek commands: %d", - time); - } - } -#endif - if (!in_interrupt()) { - /* shouldn't be cleared if called from isr - */ - ft_interrupt_seen = 0; - } - while (count) { - result = fdc_write(*cmd_data); - if (result < 0) { - TRACE(ft_t_fdc_dma, - "fdc_mode = %02x, status = %02x at index %d", - (int) fdc_mode, (int) fdc_status, - cmd_len - count); - if (++retry <= 3) { - TRACE(ft_t_warn, "fdc_write timeout, retry"); - } else { - TRACE(ft_t_err, "fdc_write timeout, fatal"); - /* recover ??? */ - break; - } - } else { - --count; - ++cmd_data; - } - } -#ifdef TESTING - if (fdc_mode == FDC_SEEK) { - last_time = ftape_timestamp(); - } -#endif - spin_unlock_irqrestore(&fdc_io_lock, flags); - TRACE_EXIT result; -} - -/* Input a res_len long result string from the FDC. - * The FDC should be ready to send the result or an error - * (EBUSY or ETIME) will occur. - */ -int fdc_result(__u8 * res_data, int res_len) -{ - int result = 0; - unsigned long flags; - int count = res_len; - int retry = 0; - TRACE_FUN(ft_t_any); - - spin_lock_irqsave(&fdc_io_lock, flags); - fdc_status = inb(fdc.msr); - if ((fdc_status & FDC_DATA_READY_MASK) != FDC_DATA_OUT_READY) { - TRACE(ft_t_err, "fdc not ready"); - result = -EBUSY; - } else while (count) { - if (!(fdc_status & FDC_BUSY)) { - spin_unlock_irqrestore(&fdc_io_lock, flags); - TRACE_ABORT(-EIO, ft_t_err, "premature end of result phase"); - } - result = fdc_read(res_data); - if (result < 0) { - TRACE(ft_t_fdc_dma, - "fdc_mode = %02x, status = %02x at index %d", - (int) fdc_mode, - (int) fdc_status, - res_len - count); - if (++retry <= 3) { - TRACE(ft_t_warn, "fdc_read timeout, retry"); - } else { - TRACE(ft_t_err, "fdc_read timeout, fatal"); - /* recover ??? */ - break; - ++retry; - } - } else { - --count; - ++res_data; - } - } - spin_unlock_irqrestore(&fdc_io_lock, flags); - fdc_usec_wait(FT_RQM_DELAY); /* allow FDC to negate BSY */ - TRACE_EXIT result; -} - -/* Handle command and result phases for - * commands without data phase. - */ -static int fdc_issue_command(const __u8 * out_data, int out_count, - __u8 * in_data, int in_count) -{ - TRACE_FUN(ft_t_any); - - if (out_count > 0) { - TRACE_CATCH(fdc_command(out_data, out_count),); - } - /* will take 24 - 30 usec for fdc_sense_drive_status and - * fdc_sense_interrupt_status commands. - * 35 fails sometimes (5/9/93 SJL) - * On a loaded system it incidentally takes longer than - * this for the fdc to get ready ! ?????? WHY ?????? - * So until we know what's going on use a very long timeout. - */ - TRACE_CATCH(fdc_ready_out_wait(500 /* usec */),); - if (in_count > 0) { - TRACE_CATCH(fdc_result(in_data, in_count), - TRACE(ft_t_err, "result phase aborted")); - } - TRACE_EXIT 0; -} - -/* Wait for FDC interrupt with timeout (in milliseconds). - * Signals are blocked so the wait will not be aborted. - * Note: interrupts must be enabled ! (23/05/93 SJL) - */ -int fdc_interrupt_wait(unsigned int time) -{ - DECLARE_WAITQUEUE(wait,current); - sigset_t old_sigmask; - static int resetting; - long timeout; - - TRACE_FUN(ft_t_fdc_dma); - - if (waitqueue_active(&ftape_wait_intr)) { - TRACE_ABORT(-EIO, ft_t_err, "error: nested call"); - } - /* timeout time will be up to USPT microseconds too long ! */ - timeout = (1000 * time + FT_USPT - 1) / FT_USPT; - - spin_lock_irq(¤t->sighand->siglock); - old_sigmask = current->blocked; - sigfillset(¤t->blocked); - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); - - set_current_state(TASK_INTERRUPTIBLE); - add_wait_queue(&ftape_wait_intr, &wait); - while (!ft_interrupt_seen && timeout) - timeout = schedule_timeout_interruptible(timeout); - - spin_lock_irq(¤t->sighand->siglock); - current->blocked = old_sigmask; - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); - - remove_wait_queue(&ftape_wait_intr, &wait); - /* the following IS necessary. True: as well - * wake_up_interruptible() as the schedule() set TASK_RUNNING - * when they wakeup a task, BUT: it may very well be that - * ft_interrupt_seen is already set to 1 when we enter here - * in which case schedule() gets never called, and - * TASK_RUNNING never set. This has the funny effect that we - * execute all the code until we leave kernel space, but then - * the task is stopped (a task CANNOT be preempted while in - * kernel mode. Sending a pair of SIGSTOP/SIGCONT to the - * tasks wakes it up again. Funny! :-) - */ - current->state = TASK_RUNNING; - if (ft_interrupt_seen) { /* woken up by interrupt */ - ft_interrupt_seen = 0; - TRACE_EXIT 0; - } - /* Original comment: - * In first instance, next statement seems unnecessary since - * it will be cleared in fdc_command. However, a small part of - * the software seems to rely on this being cleared here - * (ftape_close might fail) so stick to it until things get fixed ! - */ - /* My deeply sought of knowledge: - * Behold NO! It is obvious. fdc_reset() doesn't call fdc_command() - * but nevertheless uses fdc_interrupt_wait(). OF COURSE this needs to - * be reset here. - */ - ft_interrupt_seen = 0; /* clear for next call */ - if (!resetting) { - resetting = 1; /* break infinite recursion if reset fails */ - TRACE(ft_t_any, "cleanup reset"); - fdc_reset(); - resetting = 0; - } - TRACE_EXIT (signal_pending(current)) ? -EINTR : -ETIME; -} - -/* Start/stop drive motor. Enable DMA mode. - */ -void fdc_motor(int motor) -{ - int unit = ft_drive_sel; - int data = unit | FDC_RESET_NOT | FDC_DMA_MODE; - TRACE_FUN(ft_t_any); - - ftape_motor = motor; - if (ftape_motor) { - data |= FDC_MOTOR_0 << unit; - TRACE(ft_t_noise, "turning motor %d on", unit); - } else { - TRACE(ft_t_noise, "turning motor %d off", unit); - } - if (ft_mach2) { - outb_p(data, fdc.dor2); - } else { - outb_p(data, fdc.dor); - } - ftape_sleep(10 * FT_MILLISECOND); - TRACE_EXIT; -} - -static void fdc_update_dsr(void) -{ - TRACE_FUN(ft_t_any); - - TRACE(ft_t_flow, "rate = %d Kbps, precomp = %d ns", - fdc_data_rate, fdc_precomp); - if (fdc.type >= i82077) { - outb_p((fdc_rate_code & 0x03) | fdc_prec_code, fdc.dsr); - } else { - outb_p(fdc_rate_code & 0x03, fdc.ccr); - } - TRACE_EXIT; -} - -void fdc_set_write_precomp(int precomp) -{ - TRACE_FUN(ft_t_any); - - TRACE(ft_t_noise, "New precomp: %d nsec", precomp); - fdc_precomp = precomp; - /* write precompensation can be set in multiples of 41.67 nsec. - * round the parameter to the nearest multiple and convert it - * into a fdc setting. Note that 0 means default to the fdc, - * 7 is used instead of that. - */ - fdc_prec_code = ((fdc_precomp + 21) / 42) << 2; - if (fdc_prec_code == 0 || fdc_prec_code > (6 << 2)) { - fdc_prec_code = 7 << 2; - } - fdc_update_dsr(); - TRACE_EXIT; -} - -/* Reprogram the 82078 registers to use Data Rate Table 1 on all drives. - */ -static void fdc_set_drive_specs(void) -{ - __u8 cmd[] = { FDC_DRIVE_SPEC, 0x00, 0x00, 0x00, 0x00, 0xc0}; - int result; - TRACE_FUN(ft_t_any); - - TRACE(ft_t_flow, "Setting of drive specs called"); - if (fdc.type >= i82078_1) { - cmd[1] = (0 << 5) | (2 << 2); - cmd[2] = (1 << 5) | (2 << 2); - cmd[3] = (2 << 5) | (2 << 2); - cmd[4] = (3 << 5) | (2 << 2); - result = fdc_command(cmd, NR_ITEMS(cmd)); - if (result < 0) { - TRACE(ft_t_err, "Setting of drive specs failed"); - } - } - TRACE_EXIT; -} - -/* Select clock for fdc, must correspond with tape drive setting ! - * This also influences the fdc timing so we must adjust some values. - */ -int fdc_set_data_rate(int rate) -{ - int bad_rate = 0; - TRACE_FUN(ft_t_any); - - /* Select clock for fdc, must correspond with tape drive setting ! - * This also influences the fdc timing so we must adjust some values. - */ - TRACE(ft_t_fdc_dma, "new rate = %d", rate); - switch (rate) { - case 250: - fdc_rate_code = fdc_data_rate_250; - break; - case 500: - fdc_rate_code = fdc_data_rate_500; - break; - case 1000: - if (fdc.type < i82077) { - bad_rate = 1; - } else { - fdc_rate_code = fdc_data_rate_1000; - } - break; - case 2000: - if (fdc.type < i82078_1) { - bad_rate = 1; - } else { - fdc_rate_code = fdc_data_rate_2000; - } - break; - default: - bad_rate = 1; - } - if (bad_rate) { - TRACE_ABORT(-EIO, - ft_t_fdc_dma, "%d is not a valid data rate", rate); - } - fdc_data_rate = rate; - fdc_update_dsr(); - fdc_set_seek_rate(fdc_seek_rate); /* clock changed! */ - ftape_udelay(1000); - TRACE_EXIT 0; -} - -/* keep the unit select if keep_select is != 0, - */ -static void fdc_dor_reset(int keep_select) -{ - __u8 fdc_ctl = ft_drive_sel; - - if (keep_select != 0) { - fdc_ctl |= FDC_DMA_MODE; - if (ftape_motor) { - fdc_ctl |= FDC_MOTOR_0 << ft_drive_sel; - } - } - ftape_udelay(10); /* ??? but seems to be necessary */ - if (ft_mach2) { - outb_p(fdc_ctl & 0x0f, fdc.dor); - outb_p(fdc_ctl, fdc.dor2); - } else { - outb_p(fdc_ctl, fdc.dor); - } - fdc_usec_wait(10); /* delay >= 14 fdc clocks */ - if (keep_select == 0) { - fdc_ctl = 0; - } - fdc_ctl |= FDC_RESET_NOT; - if (ft_mach2) { - outb_p(fdc_ctl & 0x0f, fdc.dor); - outb_p(fdc_ctl, fdc.dor2); - } else { - outb_p(fdc_ctl, fdc.dor); - } -} - -/* Reset the floppy disk controller. Leave the ftape_unit selected. - */ -void fdc_reset(void) -{ - int st0; - int i; - int dummy; - unsigned long flags; - TRACE_FUN(ft_t_any); - - spin_lock_irqsave(&fdc_io_lock, flags); - - fdc_dor_reset(1); /* keep unit selected */ - - fdc_mode = fdc_idle; - - /* maybe the spin_lock_irq* pair is not necessary, BUT: - * the following line MUST be here. Otherwise fdc_interrupt_wait() - * won't wait. Note that fdc_reset() is called from - * ftape_dumb_stop() when the fdc is busy transferring data. In this - * case fdc_isr() MOST PROBABLY sets ft_interrupt_seen, and tries - * to get the result bytes from the fdc etc. CLASH. - */ - ft_interrupt_seen = 0; - - /* Program data rate - */ - fdc_update_dsr(); /* restore data rate and precomp */ - - spin_unlock_irqrestore(&fdc_io_lock, flags); - - /* - * Wait for first polling cycle to complete - */ - if (fdc_interrupt_wait(1 * FT_SECOND) < 0) { - TRACE(ft_t_err, "no drive polling interrupt!"); - } else { /* clear all disk-changed statuses */ - for (i = 0; i < 4; ++i) { - if(fdc_sense_interrupt_status(&st0, &dummy) != 0) { - TRACE(ft_t_err, "sense failed for %d", i); - } - if (i == ft_drive_sel) { - ftape_current_cylinder = dummy; - } - } - TRACE(ft_t_noise, "drive polling completed"); - } - /* - * SPECIFY COMMAND - */ - fdc_set_seek_rate(fdc_seek_rate); - /* - * DRIVE SPECIFICATION COMMAND (if fdc type known) - */ - if (fdc.type >= i82078_1) { - fdc_set_drive_specs(); - } - TRACE_EXIT; -} - -#if !defined(CLK_48MHZ) -# define CLK_48MHZ 1 -#endif - -/* When we're done, put the fdc into reset mode so that the regular - * floppy disk driver will figure out that something is wrong and - * initialize the controller the way it wants. - */ -void fdc_disable(void) -{ - __u8 cmd1[] = {FDC_CONFIGURE, 0x00, 0x00, 0x00}; - __u8 cmd2[] = {FDC_LOCK}; - __u8 cmd3[] = {FDC_UNLOCK}; - __u8 stat[1]; - TRACE_FUN(ft_t_flow); - - if (!fdc_fifo_locked) { - fdc_reset(); - TRACE_EXIT; - } - if (fdc_issue_command(cmd3, 1, stat, 1) < 0 || stat[0] != 0x00) { - fdc_dor_reset(0); - TRACE_ABORT(/**/, ft_t_bug, - "couldn't unlock fifo, configuration remains changed"); - } - fdc_fifo_locked = 0; - if (CLK_48MHZ && fdc.type >= i82078) { - cmd1[0] |= FDC_CLK48_BIT; - } - cmd1[2] = ((fdc_fifo_state) ? 0 : 0x20) + (fdc_fifo_thr - 1); - if (fdc_command(cmd1, NR_ITEMS(cmd1)) < 0) { - fdc_dor_reset(0); - TRACE_ABORT(/**/, ft_t_bug, - "couldn't reconfigure fifo to old state"); - } - if (fdc_lock_state && - fdc_issue_command(cmd2, 1, stat, 1) < 0) { - fdc_dor_reset(0); - TRACE_ABORT(/**/, ft_t_bug, "couldn't lock old state again"); - } - TRACE(ft_t_noise, "fifo restored: %sabled, thr. %d, %slocked", - fdc_fifo_state ? "en" : "dis", - fdc_fifo_thr, (fdc_lock_state) ? "" : "not "); - fdc_dor_reset(0); - TRACE_EXIT; -} - -/* Specify FDC seek-rate (milliseconds) - */ -static int fdc_set_seek_rate(int seek_rate) -{ - /* set step rate, dma mode, and minimal head load and unload times - */ - __u8 in[3] = { FDC_SPECIFY, 1, (1 << 1)}; - - fdc_seek_rate = seek_rate; - in[1] |= (16 - (fdc_data_rate * fdc_seek_rate) / 500) << 4; - - return fdc_command(in, 3); -} - -/* Sense drive status: get unit's drive status (ST3) - */ -int fdc_sense_drive_status(int *st3) -{ - __u8 out[2]; - __u8 in[1]; - TRACE_FUN(ft_t_any); - - out[0] = FDC_SENSED; - out[1] = ft_drive_sel; - TRACE_CATCH(fdc_issue_command(out, 2, in, 1),); - *st3 = in[0]; - TRACE_EXIT 0; -} - -/* Sense Interrupt Status command: - * should be issued at the end of each seek. - * get ST0 and current cylinder. - */ -int fdc_sense_interrupt_status(int *st0, int *current_cylinder) -{ - __u8 out[1]; - __u8 in[2]; - TRACE_FUN(ft_t_any); - - out[0] = FDC_SENSEI; - TRACE_CATCH(fdc_issue_command(out, 1, in, 2),); - *st0 = in[0]; - *current_cylinder = in[1]; - TRACE_EXIT 0; -} - -/* step to track - */ -int fdc_seek(int track) -{ - __u8 out[3]; - int st0, pcn; -#ifdef TESTING - unsigned int time; -#endif - TRACE_FUN(ft_t_any); - - out[0] = FDC_SEEK; - out[1] = ft_drive_sel; - out[2] = track; -#ifdef TESTING - time = ftape_timestamp(); -#endif - /* We really need this command to work ! - */ - ft_seek_completed = 0; - TRACE_CATCH(fdc_command(out, 3), - fdc_reset(); - TRACE(ft_t_noise, "destination was: %d, resetting FDC...", - track)); - /* Handle interrupts until ft_seek_completed or timeout. - */ - for (;;) { - TRACE_CATCH(fdc_interrupt_wait(2 * FT_SECOND),); - if (ft_seek_completed) { - TRACE_CATCH(fdc_sense_interrupt_status(&st0, &pcn),); - if ((st0 & ST0_SEEK_END) == 0) { - TRACE_ABORT(-EIO, ft_t_err, - "no seek-end after seek completion !??"); - } - break; - } - } -#ifdef TESTING - time = ftape_timediff(time, ftape_timestamp()) / abs(track - ftape_current_cylinder); - if ((time < 900 || time > 3100) && abs(track - ftape_current_cylinder) > 5) { - TRACE(ft_t_warn, "Wrong FDC STEP interval: %d usecs (%d)", - time, track - ftape_current_cylinder); - } -#endif - /* Verify whether we issued the right tape command. - */ - /* Verify that we seek to the proper track. */ - if (pcn != track) { - TRACE_ABORT(-EIO, ft_t_err, "bad seek.."); - } - ftape_current_cylinder = track; - TRACE_EXIT 0; -} - -static int perpend_mode; /* set if fdc is in perpendicular mode */ - -static int perpend_off(void) -{ - __u8 perpend[] = {FDC_PERPEND, 0x00}; - TRACE_FUN(ft_t_any); - - if (perpend_mode) { - /* Turn off perpendicular mode */ - perpend[1] = 0x80; - TRACE_CATCH(fdc_command(perpend, 2), - TRACE(ft_t_err,"Perpendicular mode exit failed!")); - perpend_mode = 0; - } - TRACE_EXIT 0; -} - -static int handle_perpend(int segment_id) -{ - __u8 perpend[] = {FDC_PERPEND, 0x00}; - TRACE_FUN(ft_t_any); - - /* When writing QIC-3020 tapes, turn on perpendicular mode - * if tape is moving in forward direction (even tracks). - */ - if (ft_qic_std == QIC_TAPE_QIC3020 && - ((segment_id / ft_segments_per_track) & 1) == 0) { -/* FIXME: some i82077 seem to support perpendicular mode as - * well. - */ -#if 0 - if (fdc.type < i82077AA) {} -#else - if (fdc.type < i82077 && ft_data_rate < 1000) { -#endif - /* fdc does not support perpendicular mode: complain - */ - TRACE_ABORT(-EIO, ft_t_err, - "Your FDC does not support QIC-3020."); - } - perpend[1] = 0x03 /* 0x83 + (0x4 << ft_drive_sel) */ ; - TRACE_CATCH(fdc_command(perpend, 2), - TRACE(ft_t_err,"Perpendicular mode entry failed!")); - TRACE(ft_t_flow, "Perpendicular mode set"); - perpend_mode = 1; - TRACE_EXIT 0; - } - TRACE_EXIT perpend_off(); -} - -static inline void fdc_setup_dma(char mode, - volatile void *addr, unsigned int count) -{ - /* Program the DMA controller. - */ - disable_dma(fdc.dma); - clear_dma_ff(fdc.dma); - set_dma_mode(fdc.dma, mode); - set_dma_addr(fdc.dma, virt_to_bus((void*)addr)); - set_dma_count(fdc.dma, count); - enable_dma(fdc.dma); -} - -/* Setup fdc and dma for formatting the next segment - */ -int fdc_setup_formatting(buffer_struct * buff) -{ - unsigned long flags; - __u8 out[6] = { - FDC_FORMAT, 0x00, 3, 4 * FT_SECTORS_PER_SEGMENT, 0x00, 0x6b - }; - TRACE_FUN(ft_t_any); - - TRACE_CATCH(handle_perpend(buff->segment_id),); - /* Program the DMA controller. - */ - TRACE(ft_t_fdc_dma, - "phys. addr. = %lx", virt_to_bus((void*) buff->ptr)); - spin_lock_irqsave(&fdc_io_lock, flags); - fdc_setup_dma(DMA_MODE_WRITE, buff->ptr, FT_SECTORS_PER_SEGMENT * 4); - /* Issue FDC command to start reading/writing. - */ - out[1] = ft_drive_sel; - out[4] = buff->gap3; - TRACE_CATCH(fdc_setup_error = fdc_command(out, sizeof(out)), - restore_flags(flags); fdc_mode = fdc_idle); - spin_unlock_irqrestore(&fdc_io_lock, flags); - TRACE_EXIT 0; -} - - -/* Setup Floppy Disk Controller and DMA to read or write the next cluster - * of good sectors from or to the current segment. - */ -int fdc_setup_read_write(buffer_struct * buff, __u8 operation) -{ - unsigned long flags; - __u8 out[9]; - int dma_mode; - TRACE_FUN(ft_t_any); - - switch(operation) { - case FDC_VERIFY: - if (fdc.type < i82077) { - operation = FDC_READ; - } - case FDC_READ: - case FDC_READ_DELETED: - dma_mode = DMA_MODE_READ; - TRACE(ft_t_fdc_dma, "xfer %d sectors to 0x%p", - buff->sector_count, buff->ptr); - TRACE_CATCH(perpend_off(),); - break; - case FDC_WRITE_DELETED: - TRACE(ft_t_noise, "deleting segment %d", buff->segment_id); - case FDC_WRITE: - dma_mode = DMA_MODE_WRITE; - /* When writing QIC-3020 tapes, turn on perpendicular mode - * if tape is moving in forward direction (even tracks). - */ - TRACE_CATCH(handle_perpend(buff->segment_id),); - TRACE(ft_t_fdc_dma, "xfer %d sectors from 0x%p", - buff->sector_count, buff->ptr); - break; - default: - TRACE_ABORT(-EIO, - ft_t_bug, "bug: invalid operation parameter"); - } - TRACE(ft_t_fdc_dma, "phys. addr. = %lx",virt_to_bus((void*)buff->ptr)); - spin_lock_irqsave(&fdc_io_lock, flags); - if (operation != FDC_VERIFY) { - fdc_setup_dma(dma_mode, buff->ptr, - FT_SECTOR_SIZE * buff->sector_count); - } - /* Issue FDC command to start reading/writing. - */ - out[0] = operation; - out[1] = ft_drive_sel; - out[2] = buff->cyl; - out[3] = buff->head; - out[4] = buff->sect + buff->sector_offset; - out[5] = 3; /* Sector size of 1K. */ - out[6] = out[4] + buff->sector_count - 1; /* last sector */ - out[7] = 109; /* Gap length. */ - out[8] = 0xff; /* No limit to transfer size. */ - TRACE(ft_t_fdc_dma, "C: 0x%02x, H: 0x%02x, R: 0x%02x, cnt: 0x%02x", - out[2], out[3], out[4], out[6] - out[4] + 1); - spin_unlock_irqrestore(&fdc_io_lock, flags); - TRACE_CATCH(fdc_setup_error = fdc_command(out, 9),fdc_mode = fdc_idle); - TRACE_EXIT 0; -} - -int fdc_fifo_threshold(__u8 threshold, - int *fifo_state, int *lock_state, int *fifo_thr) -{ - const __u8 cmd0[] = {FDC_DUMPREGS}; - __u8 cmd1[] = {FDC_CONFIGURE, 0, (0x0f & (threshold - 1)), 0}; - const __u8 cmd2[] = {FDC_LOCK}; - const __u8 cmd3[] = {FDC_UNLOCK}; - __u8 reg[10]; - __u8 stat; - int i; - int result; - TRACE_FUN(ft_t_any); - - if (CLK_48MHZ && fdc.type >= i82078) { - cmd1[0] |= FDC_CLK48_BIT; - } - /* Dump fdc internal registers for examination - */ - TRACE_CATCH(fdc_command(cmd0, NR_ITEMS(cmd0)), - TRACE(ft_t_warn, "dumpreg cmd failed, fifo unchanged")); - /* Now read fdc internal registers from fifo - */ - for (i = 0; i < (int)NR_ITEMS(reg); ++i) { - fdc_read(®[i]); - TRACE(ft_t_fdc_dma, "Register %d = 0x%02x", i, reg[i]); - } - if (fifo_state && lock_state && fifo_thr) { - *fifo_state = (reg[8] & 0x20) == 0; - *lock_state = reg[7] & 0x80; - *fifo_thr = 1 + (reg[8] & 0x0f); - } - TRACE(ft_t_noise, - "original fifo state: %sabled, threshold %d, %slocked", - ((reg[8] & 0x20) == 0) ? "en" : "dis", - 1 + (reg[8] & 0x0f), (reg[7] & 0x80) ? "" : "not "); - /* If fdc is already locked, unlock it first ! */ - if (reg[7] & 0x80) { - fdc_ready_wait(100); - TRACE_CATCH(fdc_issue_command(cmd3, NR_ITEMS(cmd3), &stat, 1), - TRACE(ft_t_bug, "FDC unlock command failed, " - "configuration unchanged")); - } - fdc_fifo_locked = 0; - /* Enable fifo and set threshold at xx bytes to allow a - * reasonably large latency and reduce number of dma bursts. - */ - fdc_ready_wait(100); - if ((result = fdc_command(cmd1, NR_ITEMS(cmd1))) < 0) { - TRACE(ft_t_bug, "configure cmd failed, fifo unchanged"); - } - /* Now lock configuration so reset will not change it - */ - if(fdc_issue_command(cmd2, NR_ITEMS(cmd2), &stat, 1) < 0 || - stat != 0x10) { - TRACE_ABORT(-EIO, ft_t_bug, - "FDC lock command failed, stat = 0x%02x", stat); - } - fdc_fifo_locked = 1; - TRACE_EXIT result; -} - -static int fdc_fifo_enable(void) -{ - TRACE_FUN(ft_t_any); - - if (fdc_fifo_locked) { - TRACE_ABORT(0, ft_t_warn, "Fifo not enabled because locked"); - } - TRACE_CATCH(fdc_fifo_threshold(ft_fdc_threshold /* bytes */, - &fdc_fifo_state, - &fdc_lock_state, - &fdc_fifo_thr),); - TRACE_CATCH(fdc_fifo_threshold(ft_fdc_threshold /* bytes */, - NULL, NULL, NULL),); - TRACE_EXIT 0; -} - -/* Determine fd controller type - */ -static __u8 fdc_save_state[2]; - -static int fdc_probe(void) -{ - __u8 cmd[1]; - __u8 stat[16]; /* must be able to hold dumpregs & save results */ - int i; - TRACE_FUN(ft_t_any); - - /* Try to find out what kind of fd controller we have to deal with - * Scheme borrowed from floppy driver: - * first try if FDC_DUMPREGS command works - * (this indicates that we have a 82072 or better) - * then try the FDC_VERSION command (82072 doesn't support this) - * then try the FDC_UNLOCK command (some older 82077's don't support this) - * then try the FDC_PARTID command (82078's support this) - */ - cmd[0] = FDC_DUMPREGS; - if (fdc_issue_command(cmd, 1, stat, 1) != 0) { - TRACE_ABORT(no_fdc, ft_t_bug, "No FDC found"); - } - if (stat[0] == 0x80) { - /* invalid command: must be pre 82072 */ - TRACE_ABORT(i8272, - ft_t_warn, "Type 8272A/765A compatible FDC found"); - } - fdc_result(&stat[1], 9); - fdc_save_state[0] = stat[7]; - fdc_save_state[1] = stat[8]; - cmd[0] = FDC_VERSION; - if (fdc_issue_command(cmd, 1, stat, 1) < 0 || stat[0] == 0x80) { - TRACE_ABORT(i8272, ft_t_warn, "Type 82072 FDC found"); - } - if (*stat != 0x90) { - TRACE_ABORT(i8272, ft_t_warn, "Unknown FDC found"); - } - cmd[0] = FDC_UNLOCK; - if(fdc_issue_command(cmd, 1, stat, 1) < 0 || stat[0] != 0x00) { - TRACE_ABORT(i8272, ft_t_warn, - "Type pre-1991 82077 FDC found, " - "treating it like a 82072"); - } - if (fdc_save_state[0] & 0x80) { /* was locked */ - cmd[0] = FDC_LOCK; /* restore lock */ - (void)fdc_issue_command(cmd, 1, stat, 1); - TRACE(ft_t_warn, "FDC is already locked"); - } - /* Test for a i82078 FDC */ - cmd[0] = FDC_PARTID; - if (fdc_issue_command(cmd, 1, stat, 1) < 0 || stat[0] == 0x80) { - /* invalid command: not a i82078xx type FDC */ - for (i = 0; i < 4; ++i) { - outb_p(i, fdc.tdr); - if ((inb_p(fdc.tdr) & 0x03) != i) { - TRACE_ABORT(i82077, - ft_t_warn, "Type 82077 FDC found"); - } - } - TRACE_ABORT(i82077AA, ft_t_warn, "Type 82077AA FDC found"); - } - /* FDC_PARTID cmd succeeded */ - switch (stat[0] >> 5) { - case 0x0: - /* i82078SL or i82078-1. The SL part cannot run at - * 2Mbps (the SL and -1 dies are identical; they are - * speed graded after production, according to Intel). - * Some SL's can be detected by doing a SAVE cmd and - * look at bit 7 of the first byte (the SEL3V# bit). - * If it is 0, the part runs off 3Volts, and hence it - * is a SL. - */ - cmd[0] = FDC_SAVE; - if(fdc_issue_command(cmd, 1, stat, 16) < 0) { - TRACE(ft_t_err, "FDC_SAVE failed. Dunno why"); - /* guess we better claim the fdc to be a i82078 */ - TRACE_ABORT(i82078, - ft_t_warn, - "Type i82078 FDC (i suppose) found"); - } - if ((stat[0] & FDC_SEL3V_BIT)) { - /* fdc running off 5Volts; Pray that it's a i82078-1 - */ - TRACE_ABORT(i82078_1, ft_t_warn, - "Type i82078-1 or 5Volt i82078SL FDC found"); - } - TRACE_ABORT(i82078, ft_t_warn, - "Type 3Volt i82078SL FDC (1Mbps) found"); - case 0x1: - case 0x2: /* S82078B */ - /* The '78B isn't '78 compatible. Detect it as a '77AA */ - TRACE_ABORT(i82077AA, ft_t_warn, "Type i82077AA FDC found"); - case 0x3: /* NSC PC8744 core; used in several super-IO chips */ - TRACE_ABORT(i82077AA, - ft_t_warn, "Type 82077AA compatible FDC found"); - default: - TRACE(ft_t_warn, "A previously undetected FDC found"); - TRACE_ABORT(i82077AA, ft_t_warn, - "Treating it as a 82077AA. Please report partid= %d", - stat[0]); - } /* switch(stat[ 0] >> 5) */ - TRACE_EXIT no_fdc; -} - -static int fdc_request_regions(void) -{ - TRACE_FUN(ft_t_flow); - - if (ft_mach2 || ft_probe_fc10) { - if (!request_region(fdc.sra, 8, "fdc (ft)")) { -#ifndef BROKEN_FLOPPY_DRIVER - TRACE_EXIT -EBUSY; -#else - TRACE(ft_t_warn, -"address 0x%03x occupied (by floppy driver?), using it anyway", fdc.sra); -#endif - } - } else { - if (!request_region(fdc.sra, 6, "fdc (ft)")) { -#ifndef BROKEN_FLOPPY_DRIVER - TRACE_EXIT -EBUSY; -#else - TRACE(ft_t_warn, -"address 0x%03x occupied (by floppy driver?), using it anyway", fdc.sra); -#endif - } - if (!request_region(fdc.sra + 7, 1, "fdc (ft)")) { -#ifndef BROKEN_FLOPPY_DRIVER - release_region(fdc.sra, 6); - TRACE_EXIT -EBUSY; -#else - TRACE(ft_t_warn, -"address 0x%03x occupied (by floppy driver?), using it anyway", fdc.sra + 7); -#endif - } - } - TRACE_EXIT 0; -} - -void fdc_release_regions(void) -{ - TRACE_FUN(ft_t_flow); - - if (fdc.sra != 0) { - if (fdc.dor2 != 0) { - release_region(fdc.sra, 8); - } else { - release_region(fdc.sra, 6); - release_region(fdc.dir, 1); - } - } - TRACE_EXIT; -} - -static int fdc_config_regs(unsigned int fdc_base, - unsigned int fdc_irq, - unsigned int fdc_dma) -{ - TRACE_FUN(ft_t_flow); - - fdc.irq = fdc_irq; - fdc.dma = fdc_dma; - fdc.sra = fdc_base; - fdc.srb = fdc_base + 1; - fdc.dor = fdc_base + 2; - fdc.tdr = fdc_base + 3; - fdc.msr = fdc.dsr = fdc_base + 4; - fdc.fifo = fdc_base + 5; - fdc.dir = fdc.ccr = fdc_base + 7; - fdc.dor2 = (ft_mach2 || ft_probe_fc10) ? fdc_base + 6 : 0; - TRACE_CATCH(fdc_request_regions(), fdc.sra = 0); - TRACE_EXIT 0; -} - -static int fdc_config(void) -{ - static int already_done; - TRACE_FUN(ft_t_any); - - if (already_done) { - TRACE_CATCH(fdc_request_regions(),); - *(fdc.hook) = fdc_isr; /* hook our handler in */ - TRACE_EXIT 0; - } - if (ft_probe_fc10) { - int fc_type; - - TRACE_CATCH(fdc_config_regs(ft_fdc_base, - ft_fdc_irq, ft_fdc_dma),); - fc_type = fc10_enable(); - if (fc_type != 0) { - TRACE(ft_t_warn, "FC-%c0 controller found", '0' + fc_type); - fdc.type = fc10; - fdc.hook = &do_ftape; - *(fdc.hook) = fdc_isr; /* hook our handler in */ - already_done = 1; - TRACE_EXIT 0; - } else { - TRACE(ft_t_warn, "FC-10/20 controller not found"); - fdc_release_regions(); - fdc.type = no_fdc; - ft_probe_fc10 = 0; - ft_fdc_base = 0x3f0; - ft_fdc_irq = 6; - ft_fdc_dma = 2; - } - } - TRACE(ft_t_warn, "fdc base: 0x%x, irq: %d, dma: %d", - ft_fdc_base, ft_fdc_irq, ft_fdc_dma); - TRACE_CATCH(fdc_config_regs(ft_fdc_base, ft_fdc_irq, ft_fdc_dma),); - fdc.hook = &do_ftape; - *(fdc.hook) = fdc_isr; /* hook our handler in */ - already_done = 1; - TRACE_EXIT 0; -} - -static irqreturn_t ftape_interrupt(int irq, void *dev_id) -{ - void (*handler) (void) = *fdc.hook; - int handled = 0; - TRACE_FUN(ft_t_any); - - *fdc.hook = NULL; - if (handler) { - handled = 1; - handler(); - } else { - TRACE(ft_t_bug, "Unexpected ftape interrupt"); - } - TRACE_EXIT IRQ_RETVAL(handled); -} - -static int fdc_grab_irq_and_dma(void) -{ - TRACE_FUN(ft_t_any); - - if (fdc.hook == &do_ftape) { - /* Get fast interrupt handler. - */ - if (request_irq(fdc.irq, ftape_interrupt, - IRQF_DISABLED, "ft", ftape_id)) { - TRACE_ABORT(-EIO, ft_t_bug, - "Unable to grab IRQ%d for ftape driver", - fdc.irq); - } - if (request_dma(fdc.dma, ftape_id)) { - free_irq(fdc.irq, ftape_id); - TRACE_ABORT(-EIO, ft_t_bug, - "Unable to grab DMA%d for ftape driver", - fdc.dma); - } - } - if (ft_fdc_base != 0x3f0 && (ft_fdc_dma == 2 || ft_fdc_irq == 6)) { - /* Using same dma channel or irq as standard fdc, need - * to disable the dma-gate on the std fdc. This - * couldn't be done in the floppy driver as some - * laptops are using the dma-gate to enter a low power - * or even suspended state :-( - */ - outb_p(FDC_RESET_NOT, 0x3f2); - TRACE(ft_t_noise, "DMA-gate on standard fdc disabled"); - } - TRACE_EXIT 0; -} - -int fdc_release_irq_and_dma(void) -{ - TRACE_FUN(ft_t_any); - - if (fdc.hook == &do_ftape) { - disable_dma(fdc.dma); /* just in case... */ - free_dma(fdc.dma); - free_irq(fdc.irq, ftape_id); - } - if (ft_fdc_base != 0x3f0 && (ft_fdc_dma == 2 || ft_fdc_irq == 6)) { - /* Using same dma channel as standard fdc, need to - * disable the dma-gate on the std fdc. This couldn't - * be done in the floppy driver as some laptops are - * using the dma-gate to enter a low power or even - * suspended state :-( - */ - outb_p(FDC_RESET_NOT | FDC_DMA_MODE, 0x3f2); - TRACE(ft_t_noise, "DMA-gate on standard fdc enabled again"); - } - TRACE_EXIT 0; -} - -int fdc_init(void) -{ - TRACE_FUN(ft_t_any); - - /* find a FDC to use */ - TRACE_CATCH(fdc_config(),); - TRACE_CATCH(fdc_grab_irq_and_dma(), fdc_release_regions()); - ftape_motor = 0; - fdc_catch_stray_interrupts(0); /* clear number of awainted - * stray interrupte - */ - fdc_catch_stray_interrupts(1); /* one always comes (?) */ - TRACE(ft_t_flow, "resetting fdc"); - fdc_set_seek_rate(2); /* use nominal QIC step rate */ - fdc_reset(); /* init fdc & clear track counters */ - if (fdc.type == no_fdc) { /* no FC-10 or FC-20 found */ - fdc.type = fdc_probe(); - fdc_reset(); /* update with new knowledge */ - } - if (fdc.type == no_fdc) { - fdc_release_irq_and_dma(); - fdc_release_regions(); - TRACE_EXIT -ENXIO; - } - if (fdc.type >= i82077) { - if (fdc_fifo_enable() < 0) { - TRACE(ft_t_warn, "couldn't enable fdc fifo !"); - } else { - TRACE(ft_t_flow, "fdc fifo enabled and locked"); - } - } - TRACE_EXIT 0; -} diff --git a/drivers/char/ftape/lowlevel/fdc-io.h b/drivers/char/ftape/lowlevel/fdc-io.h deleted file mode 100644 index 7ec3c72178b..00000000000 --- a/drivers/char/ftape/lowlevel/fdc-io.h +++ /dev/null @@ -1,252 +0,0 @@ -#ifndef _FDC_IO_H -#define _FDC_IO_H - -/* - * Copyright (C) 1993-1996 Bas Laarhoven, - * (C) 1996-1997 Claus-Justus Heine. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; see the file COPYING. If not, write to - the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - - * - * $Source: /homes/cvs/ftape-stacked/ftape/lowlevel/fdc-io.h,v $ - * $Revision: 1.3 $ - * $Date: 1997/10/05 19:18:06 $ - * - * This file contains the declarations for the low level - * functions that communicate with the floppy disk controller, - * for the QIC-40/80/3010/3020 floppy-tape driver "ftape" for - * Linux. - */ - -#include <linux/fdreg.h> - -#include "../lowlevel/ftape-bsm.h" - -#define FDC_SK_BIT (0x20) -#define FDC_MT_BIT (0x80) - -#define FDC_READ (FD_READ & ~(FDC_SK_BIT | FDC_MT_BIT)) -#define FDC_WRITE (FD_WRITE & ~FDC_MT_BIT) -#define FDC_READ_DELETED (0x4c) -#define FDC_WRITE_DELETED (0x49) -#define FDC_VERIFY (0x56) -#define FDC_READID (0x4a) -#define FDC_SENSED (0x04) -#define FDC_SENSEI (FD_SENSEI) -#define FDC_FORMAT (FD_FORMAT) -#define FDC_RECAL (FD_RECALIBRATE) -#define FDC_SEEK (FD_SEEK) -#define FDC_SPECIFY (FD_SPECIFY) -#define FDC_RECALIBR (FD_RECALIBRATE) -#define FDC_VERSION (FD_VERSION) -#define FDC_PERPEND (FD_PERPENDICULAR) -#define FDC_DUMPREGS (FD_DUMPREGS) -#define FDC_LOCK (FD_LOCK) -#define FDC_UNLOCK (FD_UNLOCK) -#define FDC_CONFIGURE (FD_CONFIGURE) -#define FDC_DRIVE_SPEC (0x8e) /* i82078 has this (any others?) */ -#define FDC_PARTID (0x18) /* i82078 has this */ -#define FDC_SAVE (0x2e) /* i82078 has this (any others?) */ -#define FDC_RESTORE (0x4e) /* i82078 has this (any others?) */ - -#define FDC_STATUS_MASK (STATUS_BUSY | STATUS_DMA | STATUS_DIR | STATUS_READY) -#define FDC_DATA_READY (STATUS_READY) -#define FDC_DATA_OUTPUT (STATUS_DIR) -#define FDC_DATA_READY_MASK (STATUS_READY | STATUS_DIR) -#define FDC_DATA_OUT_READY (STATUS_READY | STATUS_DIR) -#define FDC_DATA_IN_READY (STATUS_READY) -#define FDC_BUSY (STATUS_BUSY) -#define FDC_CLK48_BIT (0x80) -#define FDC_SEL3V_BIT (0x40) - -#define ST0_INT_MASK (ST0_INTR) -#define FDC_INT_NORMAL (ST0_INTR & 0x00) -#define FDC_INT_ABNORMAL (ST0_INTR & 0x40) -#define FDC_INT_INVALID (ST0_INTR & 0x80) -#define FDC_INT_READYCH (ST0_INTR & 0xC0) -#define ST0_SEEK_END (ST0_SE) -#define ST3_TRACK_0 (ST3_TZ) - -#define FDC_RESET_NOT (0x04) -#define FDC_DMA_MODE (0x08) -#define FDC_MOTOR_0 (0x10) -#define FDC_MOTOR_1 (0x20) - -typedef struct { - void (**hook) (void); /* our wedge into the isr */ - enum { - no_fdc, i8272, i82077, i82077AA, fc10, - i82078, i82078_1 - } type; /* FDC type */ - unsigned int irq; /* FDC irq nr */ - unsigned int dma; /* FDC dma channel nr */ - __u16 sra; /* Status register A (PS/2 only) */ - __u16 srb; /* Status register B (PS/2 only) */ - __u16 dor; /* Digital output register */ - __u16 tdr; /* Tape Drive Register (82077SL-1 & - 82078 only) */ - __u16 msr; /* Main Status Register */ - __u16 dsr; /* Datarate Select Register (8207x only) */ - __u16 fifo; /* Data register / Fifo on 8207x */ - __u16 dir; /* Digital Input Register */ - __u16 ccr; /* Configuration Control Register */ - __u16 dor2; /* Alternate dor on MACH-2 controller, - also used with FC-10, meaning unknown */ -} fdc_config_info; - -typedef enum { - fdc_data_rate_250 = 2, - fdc_data_rate_300 = 1, /* any fdc in default configuration */ - fdc_data_rate_500 = 0, - fdc_data_rate_1000 = 3, - fdc_data_rate_2000 = 1, /* i82078-1: when using Data Rate Table #2 */ -} fdc_data_rate_type; - -typedef enum { - fdc_idle = 0, - fdc_reading_data = FDC_READ, - fdc_seeking = FDC_SEEK, - fdc_writing_data = FDC_WRITE, - fdc_deleting = FDC_WRITE_DELETED, - fdc_reading_id = FDC_READID, - fdc_recalibrating = FDC_RECAL, - fdc_formatting = FDC_FORMAT, - fdc_verifying = FDC_VERIFY -} fdc_mode_enum; - -typedef enum { - waiting = 0, - reading, - writing, - formatting, - verifying, - deleting, - done, - error, - mmapped, -} buffer_state_enum; - -typedef struct { - __u8 *address; - volatile buffer_state_enum status; - volatile __u8 *ptr; - volatile unsigned int bytes; - volatile unsigned int segment_id; - - /* bitmap for remainder of segment not yet handled. - * one bit set for each bad sector that must be skipped. - */ - volatile SectorMap bad_sector_map; - - /* bitmap with bad data blocks in data buffer. - * the errors in this map may be retried. - */ - volatile SectorMap soft_error_map; - - /* bitmap with bad data blocks in data buffer - * the errors in this map may not be retried. - */ - volatile SectorMap hard_error_map; - - /* retry counter for soft errors. - */ - volatile int retry; - - /* sectors to skip on retry ??? - */ - volatile unsigned int skip; - - /* nr of data blocks in data buffer - */ - volatile unsigned int data_offset; - - /* offset in segment for first sector to be handled. - */ - volatile unsigned int sector_offset; - - /* size of cluster of good sectors to be handled. - */ - volatile unsigned int sector_count; - - /* size of remaining part of segment to be handled. - */ - volatile unsigned int remaining; - - /* points to next segment (contiguous) to be handled, - * or is zero if no read-ahead is allowed. - */ - volatile unsigned int next_segment; - - /* flag being set if deleted data was read. - */ - volatile int deleted; - - /* floppy coordinates of first sector in segment */ - volatile __u8 head; - volatile __u8 cyl; - volatile __u8 sect; - - /* gap to use when formatting */ - __u8 gap3; - /* flag set when buffer is mmaped */ - int mmapped; -} buffer_struct; - -/* - * fdc-io.c defined public variables - */ -extern volatile fdc_mode_enum fdc_mode; -extern int fdc_setup_error; /* outdated ??? */ -extern wait_queue_head_t ftape_wait_intr; -extern volatile int ftape_current_cylinder; /* track nr FDC thinks we're on */ -extern volatile __u8 fdc_head; /* FDC head */ -extern volatile __u8 fdc_cyl; /* FDC track */ -extern volatile __u8 fdc_sect; /* FDC sector */ -extern fdc_config_info fdc; /* FDC hardware configuration */ - -extern unsigned int ft_fdc_base; -extern unsigned int ft_fdc_irq; -extern unsigned int ft_fdc_dma; -extern unsigned int ft_fdc_threshold; -extern unsigned int ft_fdc_rate_limit; -extern int ft_probe_fc10; -extern int ft_mach2; -/* - * fdc-io.c defined public functions - */ -extern void fdc_catch_stray_interrupts(int count); -extern int fdc_ready_wait(unsigned int timeout); -extern int fdc_command(const __u8 * cmd_data, int cmd_len); -extern int fdc_result(__u8 * res_data, int res_len); -extern int fdc_interrupt_wait(unsigned int time); -extern int fdc_seek(int track); -extern int fdc_sense_drive_status(int *st3); -extern void fdc_motor(int motor); -extern void fdc_reset(void); -extern void fdc_disable(void); -extern int fdc_fifo_threshold(__u8 threshold, - int *fifo_state, int *lock_state, int *fifo_thr); -extern void fdc_wait_calibrate(void); -extern int fdc_sense_interrupt_status(int *st0, int *current_cylinder); -extern void fdc_save_drive_specs(void); -extern void fdc_restore_drive_specs(void); -extern int fdc_set_data_rate(int rate); -extern void fdc_set_write_precomp(int precomp); -extern int fdc_release_irq_and_dma(void); -extern void fdc_release_regions(void); -extern int fdc_init(void); -extern int fdc_setup_read_write(buffer_struct * buff, __u8 operation); -extern int fdc_setup_formatting(buffer_struct * buff); -#endif diff --git a/drivers/char/ftape/lowlevel/fdc-isr.c b/drivers/char/ftape/lowlevel/fdc-isr.c deleted file mode 100644 index ad2bc733ae1..00000000000 --- a/drivers/char/ftape/lowlevel/fdc-isr.c +++ /dev/null @@ -1,1170 +0,0 @@ -/* - * Copyright (C) 1994-1996 Bas Laarhoven, - * (C) 1996-1997 Claus-Justus Heine. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; see the file COPYING. If not, write to - the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - - * - * $Source: /homes/cvs/ftape-stacked/ftape/lowlevel/fdc-isr.c,v $ - * $Revision: 1.9 $ - * $Date: 1997/10/17 23:01:53 $ - * - * This file contains the interrupt service routine and - * associated code for the QIC-40/80/3010/3020 floppy-tape driver - * "ftape" for Linux. - */ - -#include <asm/io.h> -#include <asm/dma.h> - -#define volatile /* */ - -#include <linux/ftape.h> -#include <linux/qic117.h> -#include "../lowlevel/ftape-tracing.h" -#include "../lowlevel/fdc-isr.h" -#include "../lowlevel/fdc-io.h" -#include "../lowlevel/ftape-ctl.h" -#include "../lowlevel/ftape-rw.h" -#include "../lowlevel/ftape-io.h" -#include "../lowlevel/ftape-calibr.h" -#include "../lowlevel/ftape-bsm.h" - -/* Global vars. - */ -volatile int ft_expected_stray_interrupts; -volatile int ft_interrupt_seen; -volatile int ft_seek_completed; -volatile int ft_hide_interrupt; -/* Local vars. - */ -typedef enum { - no_error = 0, id_am_error = 0x01, id_crc_error = 0x02, - data_am_error = 0x04, data_crc_error = 0x08, - no_data_error = 0x10, overrun_error = 0x20, -} error_cause; -static int stop_read_ahead; - - -static void print_error_cause(int cause) -{ - TRACE_FUN(ft_t_any); - - switch (cause) { - case no_data_error: - TRACE(ft_t_noise, "no data error"); - break; - case id_am_error: - TRACE(ft_t_noise, "id am error"); - break; - case id_crc_error: - TRACE(ft_t_noise, "id crc error"); - break; - case data_am_error: - TRACE(ft_t_noise, "data am error"); - break; - case data_crc_error: - TRACE(ft_t_noise, "data crc error"); - break; - case overrun_error: - TRACE(ft_t_noise, "overrun error"); - break; - default:; - } - TRACE_EXIT; -} - -static char *fdc_mode_txt(fdc_mode_enum mode) -{ - switch (mode) { - case fdc_idle: - return "fdc_idle"; - case fdc_reading_data: - return "fdc_reading_data"; - case fdc_seeking: - return "fdc_seeking"; - case fdc_writing_data: - return "fdc_writing_data"; - case fdc_reading_id: - return "fdc_reading_id"; - case fdc_recalibrating: - return "fdc_recalibrating"; - case fdc_formatting: - return "fdc_formatting"; - case fdc_verifying: - return "fdc_verifying"; - default: - return "unknown"; - } -} - -static inline error_cause decode_irq_cause(fdc_mode_enum mode, __u8 st[]) -{ - error_cause cause = no_error; - TRACE_FUN(ft_t_any); - - /* Valid st[], decode cause of interrupt. - */ - switch (st[0] & ST0_INT_MASK) { - case FDC_INT_NORMAL: - TRACE(ft_t_fdc_dma,"normal completion: %s",fdc_mode_txt(mode)); - break; - case FDC_INT_ABNORMAL: - TRACE(ft_t_flow, "abnormal completion %s", fdc_mode_txt(mode)); - TRACE(ft_t_fdc_dma, "ST0: 0x%02x, ST1: 0x%02x, ST2: 0x%02x", - st[0], st[1], st[2]); - TRACE(ft_t_fdc_dma, - "C: 0x%02x, H: 0x%02x, R: 0x%02x, N: 0x%02x", - st[3], st[4], st[5], st[6]); - if (st[1] & 0x01) { - if (st[2] & 0x01) { - cause = data_am_error; - } else { - cause = id_am_error; - } - } else if (st[1] & 0x20) { - if (st[2] & 0x20) { - cause = data_crc_error; - } else { - cause = id_crc_error; - } - } else if (st[1] & 0x04) { - cause = no_data_error; - } else if (st[1] & 0x10) { - cause = overrun_error; - } - print_error_cause(cause); - break; - case FDC_INT_INVALID: - TRACE(ft_t_flow, "invalid completion %s", fdc_mode_txt(mode)); - break; - case FDC_INT_READYCH: - if (st[0] & ST0_SEEK_END) { - TRACE(ft_t_flow, "drive poll completed"); - } else { - TRACE(ft_t_flow, "ready change %s",fdc_mode_txt(mode)); - } - break; - default: - break; - } - TRACE_EXIT cause; -} - -static void update_history(error_cause cause) -{ - switch (cause) { - case id_am_error: - ft_history.id_am_errors++; - break; - case id_crc_error: - ft_history.id_crc_errors++; - break; - case data_am_error: - ft_history.data_am_errors++; - break; - case data_crc_error: - ft_history.data_crc_errors++; - break; - case overrun_error: - ft_history.overrun_errors++; - break; - case no_data_error: - ft_history.no_data_errors++; - break; - default:; - } -} - -static void skip_bad_sector(buffer_struct * buff) -{ - TRACE_FUN(ft_t_any); - - /* Mark sector as soft error and skip it - */ - if (buff->remaining > 0) { - ++buff->sector_offset; - ++buff->data_offset; - --buff->remaining; - buff->ptr += FT_SECTOR_SIZE; - buff->bad_sector_map >>= 1; - } else { - /* Hey, what is this????????????? C code: if we shift - * more than 31 bits, we get no shift. That's bad!!!!!! - */ - ++buff->sector_offset; /* hack for error maps */ - TRACE(ft_t_warn, "skipping last sector in segment"); - } - TRACE_EXIT; -} - -static void update_error_maps(buffer_struct * buff, unsigned int error_offset) -{ - int hard = 0; - TRACE_FUN(ft_t_any); - - if (buff->retry < FT_SOFT_RETRIES) { - buff->soft_error_map |= (1 << error_offset); - } else { - buff->hard_error_map |= (1 << error_offset); - buff->soft_error_map &= ~buff->hard_error_map; - buff->retry = -1; /* will be set to 0 in setup_segment */ - hard = 1; - } - TRACE(ft_t_noise, "sector %d : %s error\n" - KERN_INFO "hard map: 0x%08lx\n" - KERN_INFO "soft map: 0x%08lx", - FT_SECTOR(error_offset), hard ? "hard" : "soft", - (long) buff->hard_error_map, (long) buff->soft_error_map); - TRACE_EXIT; -} - -static void print_progress(buffer_struct *buff, error_cause cause) -{ - TRACE_FUN(ft_t_any); - - switch (cause) { - case no_error: - TRACE(ft_t_flow,"%d Sector(s) transferred", buff->sector_count); - break; - case no_data_error: - TRACE(ft_t_flow, "Sector %d not found", - FT_SECTOR(buff->sector_offset)); - break; - case overrun_error: - /* got an overrun error on the first byte, must be a - * hardware problem - */ - TRACE(ft_t_bug, - "Unexpected error: failing DMA or FDC controller ?"); - break; - case data_crc_error: - TRACE(ft_t_flow, "Error in sector %d", - FT_SECTOR(buff->sector_offset - 1)); - break; - case id_crc_error: - case id_am_error: - case data_am_error: - TRACE(ft_t_flow, "Error in sector %d", - FT_SECTOR(buff->sector_offset)); - break; - default: - TRACE(ft_t_flow, "Unexpected error at sector %d", - FT_SECTOR(buff->sector_offset)); - break; - } - TRACE_EXIT; -} - -/* - * Error cause: Amount xferred: Action: - * - * id_am_error 0 mark bad and skip - * id_crc_error 0 mark bad and skip - * data_am_error 0 mark bad and skip - * data_crc_error % 1024 mark bad and skip - * no_data_error 0 retry on write - * mark bad and skip on read - * overrun_error [ 0..all-1 ] mark bad and skip - * no_error all continue - */ - -/* the arg `sector' is returned by the fdc and tells us at which sector we - * are positioned at (relative to starting sector of segment) - */ -static void determine_verify_progress(buffer_struct *buff, - error_cause cause, - __u8 sector) -{ - TRACE_FUN(ft_t_any); - - if (cause == no_error && sector == 1) { - buff->sector_offset = FT_SECTORS_PER_SEGMENT; - buff->remaining = 0; - if (TRACE_LEVEL >= ft_t_flow) { - print_progress(buff, cause); - } - } else { - buff->sector_offset = sector - buff->sect; - buff->remaining = FT_SECTORS_PER_SEGMENT - buff->sector_offset; - TRACE(ft_t_noise, "%ssector offset: 0x%04x", - (cause == no_error) ? "unexpected " : "", - buff->sector_offset); - switch (cause) { - case overrun_error: - break; -#if 0 - case no_data_error: - buff->retry = FT_SOFT_RETRIES; - if (buff->hard_error_map && - buff->sector_offset > 1 && - (buff->hard_error_map & - (1 << (buff->sector_offset-2)))) { - buff->retry --; - } - break; -#endif - default: - buff->retry = FT_SOFT_RETRIES; - break; - } - if (TRACE_LEVEL >= ft_t_flow) { - print_progress(buff, cause); - } - /* Sector_offset points to the problem area Now adjust - * sector_offset so it always points one past he failing - * sector. I.e. skip the bad sector. - */ - ++buff->sector_offset; - --buff->remaining; - update_error_maps(buff, buff->sector_offset - 1); - } - TRACE_EXIT; -} - -static void determine_progress(buffer_struct *buff, - error_cause cause, - __u8 sector) -{ - unsigned int dma_residue; - TRACE_FUN(ft_t_any); - - /* Using less preferred order of disable_dma and - * get_dma_residue because this seems to fail on at least one - * system if reversed! - */ - dma_residue = get_dma_residue(fdc.dma); - disable_dma(fdc.dma); - if (cause != no_error || dma_residue != 0) { - TRACE(ft_t_noise, "%sDMA residue: 0x%04x", - (cause == no_error) ? "unexpected " : "", - dma_residue); - /* adjust to actual value: */ - if (dma_residue == 0) { - /* this happens sometimes with overrun errors. - * I don't know whether we could ignore the - * overrun error. Play save. - */ - buff->sector_count --; - } else { - buff->sector_count -= ((dma_residue + - (FT_SECTOR_SIZE - 1)) / - FT_SECTOR_SIZE); - } - } - /* Update var's influenced by the DMA operation. - */ - if (buff->sector_count > 0) { - buff->sector_offset += buff->sector_count; - buff->data_offset += buff->sector_count; - buff->ptr += (buff->sector_count * - FT_SECTOR_SIZE); - buff->remaining -= buff->sector_count; - buff->bad_sector_map >>= buff->sector_count; - } - if (TRACE_LEVEL >= ft_t_flow) { - print_progress(buff, cause); - } - if (cause != no_error) { - if (buff->remaining == 0) { - TRACE(ft_t_warn, "foo?\n" - KERN_INFO "count : %d\n" - KERN_INFO "offset: %d\n" - KERN_INFO "soft : %08x\n" - KERN_INFO "hard : %08x", - buff->sector_count, - buff->sector_offset, - buff->soft_error_map, - buff->hard_error_map); - } - /* Sector_offset points to the problem area, except if we got - * a data_crc_error. In that case it points one past the - * failing sector. - * - * Now adjust sector_offset so it always points one past he - * failing sector. I.e. skip the bad sector. - */ - if (cause != data_crc_error) { - skip_bad_sector(buff); - } - update_error_maps(buff, buff->sector_offset - 1); - } - TRACE_EXIT; -} - -static int calc_steps(int cmd) -{ - if (ftape_current_cylinder > cmd) { - return ftape_current_cylinder - cmd; - } else { - return ftape_current_cylinder + cmd; - } -} - -static void pause_tape(int retry, int mode) -{ - int result; - __u8 out[3] = {FDC_SEEK, ft_drive_sel, 0}; - TRACE_FUN(ft_t_any); - - /* We'll use a raw seek command to get the tape to rewind and - * stop for a retry. - */ - ++ft_history.rewinds; - if (qic117_cmds[ftape_current_command].non_intr) { - TRACE(ft_t_warn, "motion command may be issued too soon"); - } - if (retry && (mode == fdc_reading_data || - mode == fdc_reading_id || - mode == fdc_verifying)) { - ftape_current_command = QIC_MICRO_STEP_PAUSE; - ftape_might_be_off_track = 1; - } else { - ftape_current_command = QIC_PAUSE; - } - out[2] = calc_steps(ftape_current_command); - result = fdc_command(out, 3); /* issue QIC_117 command */ - ftape_current_cylinder = out[ 2]; - if (result < 0) { - TRACE(ft_t_noise, "qic-pause failed, status = %d", result); - } else { - ft_location.known = 0; - ft_runner_status = idle; - ft_hide_interrupt = 1; - ftape_tape_running = 0; - } - TRACE_EXIT; -} - -static void continue_xfer(buffer_struct *buff, - fdc_mode_enum mode, - unsigned int skip) -{ - int write = 0; - TRACE_FUN(ft_t_any); - - if (mode == fdc_writing_data || mode == fdc_deleting) { - write = 1; - } - /* This part can be removed if it never happens - */ - if (skip > 0 && - (ft_runner_status != running || - (write && (buff->status != writing)) || - (!write && (buff->status != reading && - buff->status != verifying)))) { - TRACE(ft_t_err, "unexpected runner/buffer state %d/%d", - ft_runner_status, buff->status); - buff->status = error; - /* finish this buffer: */ - (void)ftape_next_buffer(ft_queue_head); - ft_runner_status = aborting; - fdc_mode = fdc_idle; - } else if (buff->remaining > 0 && ftape_calc_next_cluster(buff) > 0) { - /* still sectors left in current segment, continue - * with this segment - */ - if (fdc_setup_read_write(buff, mode) < 0) { - /* failed, abort operation - */ - buff->bytes = buff->ptr - buff->address; - buff->status = error; - /* finish this buffer: */ - (void)ftape_next_buffer(ft_queue_head); - ft_runner_status = aborting; - fdc_mode = fdc_idle; - } - } else { - /* current segment completed - */ - unsigned int last_segment = buff->segment_id; - int eot = ((last_segment + 1) % ft_segments_per_track) == 0; - unsigned int next = buff->next_segment; /* 0 means stop ! */ - - buff->bytes = buff->ptr - buff->address; - buff->status = done; - buff = ftape_next_buffer(ft_queue_head); - if (eot) { - /* finished last segment on current track, - * can't continue - */ - ft_runner_status = logical_eot; - fdc_mode = fdc_idle; - TRACE_EXIT; - } - if (next <= 0) { - /* don't continue with next segment - */ - TRACE(ft_t_noise, "no %s allowed, stopping tape", - (write) ? "write next" : "read ahead"); - pause_tape(0, mode); - ft_runner_status = idle; /* not quite true until - * next irq - */ - TRACE_EXIT; - } - /* continue with next segment - */ - if (buff->status != waiting) { - TRACE(ft_t_noise, "all input buffers %s, pausing tape", - (write) ? "empty" : "full"); - pause_tape(0, mode); - ft_runner_status = idle; /* not quite true until - * next irq - */ - TRACE_EXIT; - } - if (write && next != buff->segment_id) { - TRACE(ft_t_noise, - "segments out of order, aborting write"); - ft_runner_status = do_abort; - fdc_mode = fdc_idle; - TRACE_EXIT; - } - ftape_setup_new_segment(buff, next, 0); - if (stop_read_ahead) { - buff->next_segment = 0; - stop_read_ahead = 0; - } - if (ftape_calc_next_cluster(buff) == 0 || - fdc_setup_read_write(buff, mode) != 0) { - TRACE(ft_t_err, "couldn't start %s-ahead", - write ? "write" : "read"); - ft_runner_status = do_abort; - fdc_mode = fdc_idle; - } else { - /* keep on going */ - switch (ft_driver_state) { - case reading: buff->status = reading; break; - case verifying: buff->status = verifying; break; - case writing: buff->status = writing; break; - case deleting: buff->status = deleting; break; - default: - TRACE(ft_t_err, - "BUG: ft_driver_state %d should be one out of " - "{reading, writing, verifying, deleting}", - ft_driver_state); - buff->status = write ? writing : reading; - break; - } - } - } - TRACE_EXIT; -} - -static void retry_sector(buffer_struct *buff, - int mode, - unsigned int skip) -{ - TRACE_FUN(ft_t_any); - - TRACE(ft_t_noise, "%s error, will retry", - (mode == fdc_writing_data || mode == fdc_deleting) ? "write" : "read"); - pause_tape(1, mode); - ft_runner_status = aborting; - buff->status = error; - buff->skip = skip; - TRACE_EXIT; -} - -static unsigned int find_resume_point(buffer_struct *buff) -{ - int i = 0; - SectorMap mask; - SectorMap map; - TRACE_FUN(ft_t_any); - - /* This function is to be called after all variables have been - * updated to point past the failing sector. - * If there are any soft errors before the failing sector, - * find the first soft error and return the sector offset. - * Otherwise find the last hard error. - * Note: there should always be at least one hard or soft error ! - */ - if (buff->sector_offset < 1 || buff->sector_offset > 32) { - TRACE(ft_t_bug, "BUG: sector_offset = %d", - buff->sector_offset); - TRACE_EXIT 0; - } - if (buff->sector_offset >= 32) { /* C-limitation on shift ! */ - mask = 0xffffffff; - } else { - mask = (1 << buff->sector_offset) - 1; - } - map = buff->soft_error_map & mask; - if (map) { - while ((map & (1 << i)) == 0) { - ++i; - } - TRACE(ft_t_noise, "at sector %d", FT_SECTOR(i)); - } else { - map = buff->hard_error_map & mask; - i = buff->sector_offset - 1; - if (map) { - while ((map & (1 << i)) == 0) { - --i; - } - TRACE(ft_t_noise, "after sector %d", FT_SECTOR(i)); - ++i; /* first sector after last hard error */ - } else { - TRACE(ft_t_bug, "BUG: no soft or hard errors"); - } - } - TRACE_EXIT i; -} - -/* check possible dma residue when formatting, update position record in - * buffer struct. This is, of course, modelled after determine_progress(), but - * we don't need to set up for retries because the format process cannot be - * interrupted (except at the end of the tape track). - */ -static int determine_fmt_progress(buffer_struct *buff, error_cause cause) -{ - unsigned int dma_residue; - TRACE_FUN(ft_t_any); - - /* Using less preferred order of disable_dma and - * get_dma_residue because this seems to fail on at least one - * system if reversed! - */ - dma_residue = get_dma_residue(fdc.dma); - disable_dma(fdc.dma); - if (cause != no_error || dma_residue != 0) { - TRACE(ft_t_info, "DMA residue = 0x%04x", dma_residue); - fdc_mode = fdc_idle; - switch(cause) { - case no_error: - ft_runner_status = aborting; - buff->status = idle; - break; - case overrun_error: - /* got an overrun error on the first byte, must be a - * hardware problem - */ - TRACE(ft_t_bug, - "Unexpected error: failing DMA controller ?"); - ft_runner_status = do_abort; - buff->status = error; - break; - default: - TRACE(ft_t_noise, "Unexpected error at segment %d", - buff->segment_id); - ft_runner_status = do_abort; - buff->status = error; - break; - } - TRACE_EXIT -EIO; /* can only retry entire track in format mode - */ - } - /* Update var's influenced by the DMA operation. - */ - buff->ptr += FT_SECTORS_PER_SEGMENT * 4; - buff->bytes -= FT_SECTORS_PER_SEGMENT * 4; - buff->remaining -= FT_SECTORS_PER_SEGMENT; - buff->segment_id ++; /* done with segment */ - TRACE_EXIT 0; -} - -/* - * Continue formatting, switch buffers if there is no data left in - * current buffer. This is, of course, modelled after - * continue_xfer(), but we don't need to set up for retries because - * the format process cannot be interrupted (except at the end of the - * tape track). - */ -static void continue_formatting(buffer_struct *buff) -{ - TRACE_FUN(ft_t_any); - - if (buff->remaining <= 0) { /* no space left in dma buffer */ - unsigned int next = buff->next_segment; - - if (next == 0) { /* end of tape track */ - buff->status = done; - ft_runner_status = logical_eot; - fdc_mode = fdc_idle; - TRACE(ft_t_noise, "Done formatting track %d", - ft_location.track); - TRACE_EXIT; - } - /* - * switch to next buffer! - */ - buff->status = done; - buff = ftape_next_buffer(ft_queue_head); - - if (buff->status != waiting || next != buff->segment_id) { - goto format_setup_error; - } - } - if (fdc_setup_formatting(buff) < 0) { - goto format_setup_error; - } - buff->status = formatting; - TRACE(ft_t_fdc_dma, "Formatting segment %d on track %d", - buff->segment_id, ft_location.track); - TRACE_EXIT; - format_setup_error: - ft_runner_status = do_abort; - fdc_mode = fdc_idle; - buff->status = error; - TRACE(ft_t_err, "Error setting up for segment %d on track %d", - buff->segment_id, ft_location.track); - TRACE_EXIT; - -} - -/* this handles writing, read id, reading and formatting - */ -static void handle_fdc_busy(buffer_struct *buff) -{ - static int no_data_error_count; - int retry = 0; - error_cause cause; - __u8 in[7]; - int skip; - fdc_mode_enum fmode = fdc_mode; - TRACE_FUN(ft_t_any); - - if (fdc_result(in, 7) < 0) { /* better get it fast ! */ - TRACE(ft_t_err, - "Probably fatal error during FDC Result Phase\n" - KERN_INFO - "drive may hang until (power on) reset :-("); - /* what to do next ???? - */ - TRACE_EXIT; - } - cause = decode_irq_cause(fdc_mode, in); -#ifdef TESTING - { int i; - for (i = 0; i < (int)ft_nr_buffers; ++i) - TRACE(ft_t_any, "buffer[%d] status: %d, segment_id: %d", - i, ft_buffer[i]->status, ft_buffer[i]->segment_id); - } -#endif - if (fmode == fdc_reading_data && ft_driver_state == verifying) { - fmode = fdc_verifying; - } - switch (fmode) { - case fdc_verifying: - if (ft_runner_status == aborting || - ft_runner_status == do_abort) { - TRACE(ft_t_noise,"aborting %s",fdc_mode_txt(fdc_mode)); - break; - } - if (buff->retry > 0) { - TRACE(ft_t_flow, "this is retry nr %d", buff->retry); - } - switch (cause) { - case no_error: - no_data_error_count = 0; - determine_verify_progress(buff, cause, in[5]); - if (in[2] & 0x40) { - /* This should not happen when verifying - */ - TRACE(ft_t_warn, - "deleted data in segment %d/%d", - buff->segment_id, - FT_SECTOR(buff->sector_offset - 1)); - buff->remaining = 0; /* abort transfer */ - buff->hard_error_map = EMPTY_SEGMENT; - skip = 1; - } else { - skip = 0; - } - continue_xfer(buff, fdc_mode, skip); - break; - case no_data_error: - no_data_error_count ++; - case overrun_error: - retry ++; - case id_am_error: - case id_crc_error: - case data_am_error: - case data_crc_error: - determine_verify_progress(buff, cause, in[5]); - if (cause == no_data_error) { - if (no_data_error_count >= 2) { - TRACE(ft_t_warn, - "retrying because of successive " - "no data errors"); - no_data_error_count = 0; - } else { - retry --; - } - } else { - no_data_error_count = 0; - } - if (retry) { - skip = find_resume_point(buff); - } else { - skip = buff->sector_offset; - } - if (retry && skip < 32) { - retry_sector(buff, fdc_mode, skip); - } else { - continue_xfer(buff, fdc_mode, skip); - } - update_history(cause); - break; - default: - /* Don't know why this could happen - * but find out. - */ - determine_verify_progress(buff, cause, in[5]); - retry_sector(buff, fdc_mode, 0); - TRACE(ft_t_err, "Error: unexpected error"); - break; - } - break; - case fdc_reading_data: -#ifdef TESTING - /* I'm sorry, but: NOBODY ever used this trace - * messages for ages. I guess that Bas was the last person - * that ever really used this (thank you, between the lines) - */ - if (cause == no_error) { - TRACE(ft_t_flow,"reading segment %d",buff->segment_id); - } else { - TRACE(ft_t_noise, "error reading segment %d", - buff->segment_id); - TRACE(ft_t_noise, "\n" - KERN_INFO - "IRQ:C: 0x%02x, H: 0x%02x, R: 0x%02x, N: 0x%02x\n" - KERN_INFO - "BUF:C: 0x%02x, H: 0x%02x, R: 0x%02x", - in[3], in[4], in[5], in[6], - buff->cyl, buff->head, buff->sect); - } -#endif - if (ft_runner_status == aborting || - ft_runner_status == do_abort) { - TRACE(ft_t_noise,"aborting %s",fdc_mode_txt(fdc_mode)); - break; - } - if (buff->bad_sector_map == FAKE_SEGMENT) { - /* This condition occurs when reading a `fake' - * sector that's not accessible. Doesn't - * really matter as we would have ignored it - * anyway ! - * - * Chance is that we're past the next segment - * now, so the next operation may fail and - * result in a retry. - */ - buff->remaining = 0; /* skip failing sector */ - /* buff->ptr = buff->address; */ - /* fake success: */ - continue_xfer(buff, fdc_mode, 1); - /* trace calls are expensive: place them AFTER - * the real stuff has been done. - * - */ - TRACE(ft_t_noise, "skipping empty segment %d (read), size? %d", - buff->segment_id, buff->ptr - buff->address); - TRACE_EXIT; - } - if (buff->retry > 0) { - TRACE(ft_t_flow, "this is retry nr %d", buff->retry); - } - switch (cause) { - case no_error: - determine_progress(buff, cause, in[5]); - if (in[2] & 0x40) { - /* Handle deleted data in header segments. - * Skip segment and force read-ahead. - */ - TRACE(ft_t_warn, - "deleted data in segment %d/%d", - buff->segment_id, - FT_SECTOR(buff->sector_offset - 1)); - buff->deleted = 1; - buff->remaining = 0;/*abort transfer */ - buff->soft_error_map |= - (-1L << buff->sector_offset); - if (buff->segment_id == 0) { - /* stop on next segment */ - stop_read_ahead = 1; - } - /* force read-ahead: */ - buff->next_segment = - buff->segment_id + 1; - skip = (FT_SECTORS_PER_SEGMENT - - buff->sector_offset); - } else { - skip = 0; - } - continue_xfer(buff, fdc_mode, skip); - break; - case no_data_error: - /* Tape started too far ahead of or behind the - * right sector. This may also happen in the - * middle of a segment ! - * - * Handle no-data as soft error. If next - * sector fails too, a retry (with needed - * reposition) will follow. - */ - retry ++; - case id_am_error: - case id_crc_error: - case data_am_error: - case data_crc_error: - case overrun_error: - retry += (buff->soft_error_map != 0 || - buff->hard_error_map != 0); - determine_progress(buff, cause, in[5]); -#if 1 || defined(TESTING) - if (cause == overrun_error) retry ++; -#endif - if (retry) { - skip = find_resume_point(buff); - } else { - skip = buff->sector_offset; - } - /* Try to resume with next sector on single - * errors (let ecc correct it), but retry on - * no_data (we'll be past the target when we - * get here so we cannot retry) or on - * multiple errors (reduce chance on ecc - * failure). - */ - /* cH: 23/02/97: if the last sector in the - * segment was a hard error, then there is - * no sense in a retry. This occasion seldom - * occurs but ... @:³²¸`@%&§$ - */ - if (retry && skip < 32) { - retry_sector(buff, fdc_mode, skip); - } else { - continue_xfer(buff, fdc_mode, skip); - } - update_history(cause); - break; - default: - /* Don't know why this could happen - * but find out. - */ - determine_progress(buff, cause, in[5]); - retry_sector(buff, fdc_mode, 0); - TRACE(ft_t_err, "Error: unexpected error"); - break; - } - break; - case fdc_reading_id: - if (cause == no_error) { - fdc_cyl = in[3]; - fdc_head = in[4]; - fdc_sect = in[5]; - TRACE(ft_t_fdc_dma, - "id read: C: 0x%02x, H: 0x%02x, R: 0x%02x", - fdc_cyl, fdc_head, fdc_sect); - } else { /* no valid information, use invalid sector */ - fdc_cyl = fdc_head = fdc_sect = 0; - TRACE(ft_t_flow, "Didn't find valid sector Id"); - } - fdc_mode = fdc_idle; - break; - case fdc_deleting: - case fdc_writing_data: -#ifdef TESTING - if (cause == no_error) { - TRACE(ft_t_flow, "writing segment %d", buff->segment_id); - } else { - TRACE(ft_t_noise, "error writing segment %d", - buff->segment_id); - } -#endif - if (ft_runner_status == aborting || - ft_runner_status == do_abort) { - TRACE(ft_t_flow, "aborting %s",fdc_mode_txt(fdc_mode)); - break; - } - if (buff->retry > 0) { - TRACE(ft_t_flow, "this is retry nr %d", buff->retry); - } - if (buff->bad_sector_map == FAKE_SEGMENT) { - /* This condition occurs when trying to write to a - * `fake' sector that's not accessible. Doesn't really - * matter as it isn't used anyway ! Might be located - * at wrong segment, then we'll fail on the next - * segment. - */ - TRACE(ft_t_noise, "skipping empty segment (write)"); - buff->remaining = 0; /* skip failing sector */ - /* fake success: */ - continue_xfer(buff, fdc_mode, 1); - break; - } - switch (cause) { - case no_error: - determine_progress(buff, cause, in[5]); - continue_xfer(buff, fdc_mode, 0); - break; - case no_data_error: - case id_am_error: - case id_crc_error: - case data_am_error: - case overrun_error: - update_history(cause); - determine_progress(buff, cause, in[5]); - skip = find_resume_point(buff); - retry_sector(buff, fdc_mode, skip); - break; - default: - if (in[1] & 0x02) { - TRACE(ft_t_err, "media not writable"); - } else { - TRACE(ft_t_bug, "unforeseen write error"); - } - fdc_mode = fdc_idle; - break; - } - break; /* fdc_deleting || fdc_writing_data */ - case fdc_formatting: - /* The interrupt comes after formatting a segment. We then - * have to set up QUICKLY for the next segment. But - * afterwards, there is plenty of time. - */ - switch (cause) { - case no_error: - /* would like to keep most of the formatting stuff - * outside the isr code, but timing is too critical - */ - if (determine_fmt_progress(buff, cause) >= 0) { - continue_formatting(buff); - } - break; - case no_data_error: - case id_am_error: - case id_crc_error: - case data_am_error: - case overrun_error: - default: - determine_fmt_progress(buff, cause); - update_history(cause); - if (in[1] & 0x02) { - TRACE(ft_t_err, "media not writable"); - } else { - TRACE(ft_t_bug, "unforeseen write error"); - } - break; - } /* cause */ - break; - default: - TRACE(ft_t_warn, "Warning: unexpected irq during: %s", - fdc_mode_txt(fdc_mode)); - fdc_mode = fdc_idle; - break; - } - TRACE_EXIT; -} - -/* FDC interrupt service routine. - */ -void fdc_isr(void) -{ - static int isr_active; -#ifdef TESTING - unsigned int t0 = ftape_timestamp(); -#endif - TRACE_FUN(ft_t_any); - - if (isr_active++) { - --isr_active; - TRACE(ft_t_bug, "BUG: nested interrupt, not good !"); - *fdc.hook = fdc_isr; /* hook our handler into the fdc - * code again - */ - TRACE_EXIT; - } - sti(); - if (inb_p(fdc.msr) & FDC_BUSY) { /* Entering Result Phase */ - ft_hide_interrupt = 0; - handle_fdc_busy(ftape_get_buffer(ft_queue_head)); - if (ft_runner_status == do_abort) { - /* cease operation, remember tape position - */ - TRACE(ft_t_flow, "runner aborting"); - ft_runner_status = aborting; - ++ft_expected_stray_interrupts; - } - } else { /* !FDC_BUSY */ - /* clear interrupt, cause should be gotten by issuing - * a Sense Interrupt Status command. - */ - if (fdc_mode == fdc_recalibrating || fdc_mode == fdc_seeking) { - if (ft_hide_interrupt) { - int st0; - int pcn; - - if (fdc_sense_interrupt_status(&st0, &pcn) < 0) - TRACE(ft_t_err, - "sense interrupt status failed"); - ftape_current_cylinder = pcn; - TRACE(ft_t_flow, "handled hidden interrupt"); - } - ft_seek_completed = 1; - fdc_mode = fdc_idle; - } else if (!waitqueue_active(&ftape_wait_intr)) { - if (ft_expected_stray_interrupts == 0) { - TRACE(ft_t_warn, "unexpected stray interrupt"); - } else { - TRACE(ft_t_flow, "expected stray interrupt"); - --ft_expected_stray_interrupts; - } - } else { - if (fdc_mode == fdc_reading_data || - fdc_mode == fdc_verifying || - fdc_mode == fdc_writing_data || - fdc_mode == fdc_deleting || - fdc_mode == fdc_formatting || - fdc_mode == fdc_reading_id) { - if (inb_p(fdc.msr) & FDC_BUSY) { - TRACE(ft_t_bug, - "***** FDC failure, busy too late"); - } else { - TRACE(ft_t_bug, - "***** FDC failure, no busy"); - } - } else { - TRACE(ft_t_fdc_dma, "awaited stray interrupt"); - } - } - ft_hide_interrupt = 0; - } - /* Handle sleep code. - */ - if (!ft_hide_interrupt) { - ft_interrupt_seen ++; - if (waitqueue_active(&ftape_wait_intr)) { - wake_up_interruptible(&ftape_wait_intr); - } - } else { - TRACE(ft_t_flow, "hiding interrupt while %s", - waitqueue_active(&ftape_wait_intr) ? "waiting":"active"); - } -#ifdef TESTING - t0 = ftape_timediff(t0, ftape_timestamp()); - if (t0 >= 1000) { - /* only tell us about long calls */ - TRACE(ft_t_noise, "isr() duration: %5d usec", t0); - } -#endif - *fdc.hook = fdc_isr; /* hook our handler into the fdc code again */ - --isr_active; - TRACE_EXIT; -} diff --git a/drivers/char/ftape/lowlevel/fdc-isr.h b/drivers/char/ftape/lowlevel/fdc-isr.h deleted file mode 100644 index 065aa978942..00000000000 --- a/drivers/char/ftape/lowlevel/fdc-isr.h +++ /dev/null @@ -1,55 +0,0 @@ -#ifndef _FDC_ISR_H -#define _FDC_ISR_H - -/* - * Copyright (C) 1993-1996 Bas Laarhoven, - * (C) 1996-1997 Claus-Justus Heine. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; see the file COPYING. If not, write to - the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - - * - * $Source: /homes/cvs/ftape-stacked/ftape/lowlevel/fdc-isr.h,v $ - * $Revision: 1.2 $ - * $Date: 1997/10/05 19:18:07 $ - * - * This file declares the global variables necessary to - * synchronize the interrupt service routine (isr) with the - * remainder of the QIC-40/80/3010/3020 floppy-tape driver - * "ftape" for Linux. - */ - -/* - * fdc-isr.c defined public variables - */ -extern volatile int ft_expected_stray_interrupts; /* masks stray interrupts */ -extern volatile int ft_seek_completed; /* flag set by isr */ -extern volatile int ft_interrupt_seen; /* flag set by isr */ -extern volatile int ft_hide_interrupt; /* flag set by isr */ - -/* - * fdc-io.c defined public functions - */ -extern void fdc_isr(void); - -/* - * A kernel hook that steals one interrupt from the floppy - * driver (Should be fixed when the new fdc driver gets ready) - * See the linux kernel source files: - * drivers/block/floppy.c & drivers/block/blk.h - * for the details. - */ -extern void (*do_floppy) (void); - -#endif diff --git a/drivers/char/ftape/lowlevel/ftape-bsm.c b/drivers/char/ftape/lowlevel/ftape-bsm.c deleted file mode 100644 index d1a301cc344..00000000000 --- a/drivers/char/ftape/lowlevel/ftape-bsm.c +++ /dev/null @@ -1,491 +0,0 @@ -/* - * Copyright (C) 1994-1996 Bas Laarhoven, - * (C) 1996-1997 Claus Heine. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; see the file COPYING. If not, write to - the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - - * - * $Source: /homes/cvs/ftape-stacked/ftape/lowlevel/ftape-bsm.c,v $ - * $Revision: 1.3 $ - * $Date: 1997/10/05 19:15:15 $ - * - * This file contains the bad-sector map handling code for - * the QIC-117 floppy tape driver for Linux. - * QIC-40, QIC-80, QIC-3010 and QIC-3020 maps are implemented. - */ - -#include <linux/string.h> - -#include <linux/ftape.h> -#include "../lowlevel/ftape-tracing.h" -#include "../lowlevel/ftape-bsm.h" -#include "../lowlevel/ftape-ctl.h" -#include "../lowlevel/ftape-rw.h" - -/* Global vars. - */ - -/* Local vars. - */ -static __u8 *bad_sector_map; -static SectorCount *bsm_hash_ptr; - -typedef enum { - forward, backward -} mode_type; - -#if 0 -static void ftape_put_bad_sector_entry(int segment_id, SectorMap new_map); -#endif - -#if 0 -/* fix_tape converts a normal QIC-80 tape into a 'wide' tape. - * For testing purposes only ! - */ -void fix_tape(__u8 * buffer, ft_format_type new_code) -{ - static __u8 list[BAD_SECTOR_MAP_SIZE]; - SectorMap *src_ptr = (SectorMap *) list; - __u8 *dst_ptr = bad_sector_map; - SectorMap map; - unsigned int sector = 1; - int i; - - if (format_code != fmt_var && format_code != fmt_big) { - memcpy(list, bad_sector_map, sizeof(list)); - memset(bad_sector_map, 0, sizeof(bad_sector_map)); - while ((__u8 *) src_ptr - list < sizeof(list)) { - map = *src_ptr++; - if (map == EMPTY_SEGMENT) { - *(SectorMap *) dst_ptr = 0x800000 + sector; - dst_ptr += 3; - sector += SECTORS_PER_SEGMENT; - } else { - for (i = 0; i < SECTORS_PER_SEGMENT; ++i) { - if (map & 1) { - *(SewctorMap *) dst_ptr = sector; - dst_ptr += 3; - } - map >>= 1; - ++sector; - } - } - } - } - bad_sector_map_changed = 1; - *(buffer + 4) = new_code; /* put new format code */ - if (format_code != fmt_var && new_code == fmt_big) { - PUT4(buffer, FT_6_HSEG_1, (__u32)GET2(buffer, 6)); - PUT4(buffer, FT_6_HSEG_2, (__u32)GET2(buffer, 8)); - PUT4(buffer, FT_6_FRST_SEG, (__u32)GET2(buffer, 10)); - PUT4(buffer, FT_6_LAST_SEG, (__u32)GET2(buffer, 12)); - memset(buffer+6, '\0', 8); - } - format_code = new_code; -} - -#endif - -/* given buffer that contains a header segment, find the end of - * of the bsm list - */ -__u8 * ftape_find_end_of_bsm_list(__u8 * address) -{ - __u8 *ptr = address + FT_HEADER_END; /* start of bsm list */ - __u8 *limit = address + FT_SEGMENT_SIZE; - while (ptr + 2 < limit) { - if (ptr[0] || ptr[1] || ptr[2]) { - ptr += 3; - } else { - return ptr; - } - } - return NULL; -} - -static inline void put_sector(SectorCount *ptr, unsigned int sector) -{ - ptr->bytes[0] = sector & 0xff; - sector >>= 8; - ptr->bytes[1] = sector & 0xff; - sector >>= 8; - ptr->bytes[2] = sector & 0xff; -} - -static inline unsigned int get_sector(SectorCount *ptr) -{ -#if 1 - unsigned int sector; - - sector = ptr->bytes[0]; - sector += ptr->bytes[1] << 8; - sector += ptr->bytes[2] << 16; - - return sector; -#else - /* GET4 gets the next four bytes in Intel little endian order - * and converts them to host byte order and handles unaligned - * access. - */ - return (GET4(ptr, 0) & 0x00ffffff); /* back to host byte order */ -#endif -} - -static void bsm_debug_fake(void) -{ - /* for testing of bad sector handling at end of tape - */ -#if 0 - ftape_put_bad_sector_entry(segments_per_track * tracks_per_tape - 3, - 0x000003e0; - ftape_put_bad_sector_entry(segments_per_track * tracks_per_tape - 2, - 0xff3fffff; - ftape_put_bad_sector_entry(segments_per_track * tracks_per_tape - 1, - 0xffffe000; -#endif - /* Enable to test bad sector handling - */ -#if 0 - ftape_put_bad_sector_entry(30, 0xfffffffe) - ftape_put_bad_sector_entry(32, 0x7fffffff); - ftape_put_bad_sector_entry(34, 0xfffeffff); - ftape_put_bad_sector_entry(36, 0x55555555); - ftape_put_bad_sector_entry(38, 0xffffffff); - ftape_put_bad_sector_entry(50, 0xffff0000); - ftape_put_bad_sector_entry(51, 0xffffffff); - ftape_put_bad_sector_entry(52, 0xffffffff); - ftape_put_bad_sector_entry(53, 0x0000ffff); -#endif - /* Enable when testing multiple volume tar dumps. - */ -#if 0 - { - int i; - - for (i = ft_first_data_segment; - i <= ft_last_data_segment - 7; ++i) { - ftape_put_bad_sector_entry(i, EMPTY_SEGMENT); - } - } -#endif - /* Enable when testing bit positions in *_error_map - */ -#if 0 - { - int i; - - for (i = first_data_segment; i <= last_data_segment; ++i) { - ftape_put_bad_sector_entry(i, - ftape_get_bad_sector_entry(i) - | 0x00ff00ff); - } - } -#endif -} - -static void print_bad_sector_map(void) -{ - unsigned int good_sectors; - unsigned int total_bad = 0; - int i; - TRACE_FUN(ft_t_flow); - - if (ft_format_code == fmt_big || - ft_format_code == fmt_var || - ft_format_code == fmt_1100ft) { - SectorCount *ptr = (SectorCount *)bad_sector_map; - unsigned int sector; - __u16 *ptr16; - - while((sector = get_sector(ptr++)) != 0) { - if ((ft_format_code == fmt_big || - ft_format_code == fmt_var) && - sector & 0x800000) { - total_bad += FT_SECTORS_PER_SEGMENT - 3; - TRACE(ft_t_noise, "bad segment at sector: %6d", - sector & 0x7fffff); - } else { - ++total_bad; - TRACE(ft_t_noise, "bad sector: %6d", sector); - } - } - /* Display old ftape's end-of-file marks - */ - ptr16 = (__u16*)ptr; - while ((sector = get_unaligned(ptr16++)) != 0) { - TRACE(ft_t_noise, "Old ftape eof mark: %4d/%2d", - sector, get_unaligned(ptr16++)); - } - } else { /* fixed size format */ - for (i = ft_first_data_segment; - i < (int)(ft_segments_per_track * ft_tracks_per_tape); ++i) { - SectorMap map = ((SectorMap *) bad_sector_map)[i]; - - if (map) { - TRACE(ft_t_noise, - "bsm for segment %4d: 0x%08x", i, (unsigned int)map); - total_bad += ((map == EMPTY_SEGMENT) - ? FT_SECTORS_PER_SEGMENT - 3 - : count_ones(map)); - } - } - } - good_sectors = - ((ft_segments_per_track * ft_tracks_per_tape - ft_first_data_segment) - * (FT_SECTORS_PER_SEGMENT - 3)) - total_bad; - TRACE(ft_t_info, "%d Kb usable on this tape", good_sectors); - if (total_bad == 0) { - TRACE(ft_t_info, - "WARNING: this tape has no bad blocks registered !"); - } else { - TRACE(ft_t_info, "%d bad sectors", total_bad); - } - TRACE_EXIT; -} - - -void ftape_extract_bad_sector_map(__u8 * buffer) -{ - TRACE_FUN(ft_t_any); - - /* Fill the bad sector map with the contents of buffer. - */ - if (ft_format_code == fmt_var || ft_format_code == fmt_big) { - /* QIC-3010/3020 and wide QIC-80 tapes no longer have a failed - * sector log but use this area to extend the bad sector map. - */ - bad_sector_map = &buffer[FT_HEADER_END]; - } else { - /* non-wide QIC-80 tapes have a failed sector log area that - * mustn't be included in the bad sector map. - */ - bad_sector_map = &buffer[FT_FSL + FT_FSL_SIZE]; - } - if (ft_format_code == fmt_1100ft || - ft_format_code == fmt_var || - ft_format_code == fmt_big) { - bsm_hash_ptr = (SectorCount *)bad_sector_map; - } else { - bsm_hash_ptr = NULL; - } - bsm_debug_fake(); - if (TRACE_LEVEL >= ft_t_info) { - print_bad_sector_map(); - } - TRACE_EXIT; -} - -static inline SectorMap cvt2map(unsigned int sector) -{ - return 1 << (((sector & 0x7fffff) - 1) % FT_SECTORS_PER_SEGMENT); -} - -static inline int cvt2segment(unsigned int sector) -{ - return ((sector & 0x7fffff) - 1) / FT_SECTORS_PER_SEGMENT; -} - -static int forward_seek_entry(int segment_id, - SectorCount **ptr, - SectorMap *map) -{ - unsigned int sector; - int segment; - - do { - sector = get_sector((*ptr)++); - segment = cvt2segment(sector); - } while (sector != 0 && segment < segment_id); - (*ptr) --; /* point to first sector >= segment_id */ - /* Get all sectors in segment_id - */ - if (sector == 0 || segment != segment_id) { - *map = 0; - return 0; - } else if ((sector & 0x800000) && - (ft_format_code == fmt_var || ft_format_code == fmt_big)) { - *map = EMPTY_SEGMENT; - return FT_SECTORS_PER_SEGMENT; - } else { - int count = 1; - SectorCount *tmp_ptr = (*ptr) + 1; - - *map = cvt2map(sector); - while ((sector = get_sector(tmp_ptr++)) != 0 && - (segment = cvt2segment(sector)) == segment_id) { - *map |= cvt2map(sector); - ++count; - } - return count; - } -} - -static int backwards_seek_entry(int segment_id, - SectorCount **ptr, - SectorMap *map) -{ - unsigned int sector; - int segment; /* max unsigned int */ - - if (*ptr <= (SectorCount *)bad_sector_map) { - *map = 0; - return 0; - } - do { - sector = get_sector(--(*ptr)); - segment = cvt2segment(sector); - } while (*ptr > (SectorCount *)bad_sector_map && segment > segment_id); - if (segment > segment_id) { /* at start of list, no entry found */ - *map = 0; - return 0; - } else if (segment < segment_id) { - /* before smaller entry, adjust for overshoot */ - (*ptr) ++; - *map = 0; - return 0; - } else if ((sector & 0x800000) && - (ft_format_code == fmt_big || ft_format_code == fmt_var)) { - *map = EMPTY_SEGMENT; - return FT_SECTORS_PER_SEGMENT; - } else { /* get all sectors in segment_id */ - int count = 1; - - *map = cvt2map(sector); - while(*ptr > (SectorCount *)bad_sector_map) { - sector = get_sector(--(*ptr)); - segment = cvt2segment(sector); - if (segment != segment_id) { - break; - } - *map |= cvt2map(sector); - ++count; - } - if (segment < segment_id) { - (*ptr) ++; - } - return count; - } -} - -#if 0 -static void ftape_put_bad_sector_entry(int segment_id, SectorMap new_map) -{ - SectorCount *ptr = (SectorCount *)bad_sector_map; - int count; - int new_count; - SectorMap map; - TRACE_FUN(ft_t_any); - - if (ft_format_code == fmt_1100ft || - ft_format_code == fmt_var || - ft_format_code == fmt_big) { - count = forward_seek_entry(segment_id, &ptr, &map); - new_count = count_ones(new_map); - /* If format code == 4 put empty segment instead of 32 - * bad sectors. - */ - if (ft_format_code == fmt_var || ft_format_code == fmt_big) { - if (new_count == FT_SECTORS_PER_SEGMENT) { - new_count = 1; - } - if (count == FT_SECTORS_PER_SEGMENT) { - count = 1; - } - } - if (count != new_count) { - /* insert (or delete if < 0) new_count - count - * entries. Move trailing part of list - * including terminating 0. - */ - SectorCount *hi_ptr = ptr; - - do { - } while (get_sector(hi_ptr++) != 0); - /* Note: ptr is of type byte *, and each bad sector - * consumes 3 bytes. - */ - memmove(ptr + new_count, ptr + count, - (size_t)(hi_ptr - (ptr + count))*sizeof(SectorCount)); - } - TRACE(ft_t_noise, "putting map 0x%08x at %p, segment %d", - (unsigned int)new_map, ptr, segment_id); - if (new_count == 1 && new_map == EMPTY_SEGMENT) { - put_sector(ptr++, (0x800001 + - segment_id * - FT_SECTORS_PER_SEGMENT)); - } else { - int i = 0; - - while (new_map) { - if (new_map & 1) { - put_sector(ptr++, - 1 + segment_id * - FT_SECTORS_PER_SEGMENT + i); - } - ++i; - new_map >>= 1; - } - } - } else { - ((SectorMap *) bad_sector_map)[segment_id] = new_map; - } - TRACE_EXIT; -} -#endif /* 0 */ - -SectorMap ftape_get_bad_sector_entry(int segment_id) -{ - if (ft_used_header_segment == -1) { - /* When reading header segment we'll need a blank map. - */ - return 0; - } else if (bsm_hash_ptr != NULL) { - /* Invariants: - * map - mask value returned on last call. - * bsm_hash_ptr - points to first sector greater or equal to - * first sector in last_referenced segment. - * last_referenced - segment id used in the last call, - * sector and map belong to this id. - * This code is designed for sequential access and retries. - * For true random access it may have to be redesigned. - */ - static int last_reference = -1; - static SectorMap map; - - if (segment_id > last_reference) { - /* Skip all sectors before segment_id - */ - forward_seek_entry(segment_id, &bsm_hash_ptr, &map); - } else if (segment_id < last_reference) { - /* Skip backwards until begin of buffer or - * first sector in segment_id - */ - backwards_seek_entry(segment_id, &bsm_hash_ptr, &map); - } /* segment_id == last_reference : keep map */ - last_reference = segment_id; - return map; - } else { - return ((SectorMap *) bad_sector_map)[segment_id]; - } -} - -/* This is simply here to prevent us from overwriting other kernel - * data. Writes will result in NULL Pointer dereference. - */ -void ftape_init_bsm(void) -{ - bad_sector_map = NULL; - bsm_hash_ptr = NULL; -} diff --git a/drivers/char/ftape/lowlevel/ftape-bsm.h b/drivers/char/ftape/lowlevel/ftape-bsm.h deleted file mode 100644 index ed45465af4d..00000000000 --- a/drivers/char/ftape/lowlevel/ftape-bsm.h +++ /dev/null @@ -1,66 +0,0 @@ -#ifndef _FTAPE_BSM_H -#define _FTAPE_BSM_H - -/* - * Copyright (C) 1994-1996 Bas Laarhoven, - * (C) 1996-1997 Claus-Justus Heine. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; see the file COPYING. If not, write to - the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - - * - * $Source: /homes/cvs/ftape-stacked/ftape/lowlevel/ftape-bsm.h,v $ - * $Revision: 1.2 $ - * $Date: 1997/10/05 19:18:07 $ - * - * This file contains definitions for the bad sector map handling - * routines for the QIC-117 floppy-tape driver for Linux. - */ - -#include <linux/ftape.h> -#include <linux/ftape-header-segment.h> - -#define EMPTY_SEGMENT (0xffffffff) -#define FAKE_SEGMENT (0xfffffffe) - -/* maximum (format code 4) bad sector map size (bytes). - */ -#define BAD_SECTOR_MAP_SIZE (29 * SECTOR_SIZE - 256) - -/* format code 4 bad sector entry, ftape uses this - * internally for all format codes - */ -typedef __u32 SectorMap; -/* variable and 1100 ft bad sector map entry. These three bytes represent - * a single sector address measured from BOT. - */ -typedef struct NewSectorMap { - __u8 bytes[3]; -} SectorCount; - - -/* - * ftape-bsm.c defined global vars. - */ - -/* - * ftape-bsm.c defined global functions. - */ -extern void update_bad_sector_map(__u8 * buffer); -extern void ftape_extract_bad_sector_map(__u8 * buffer); -extern SectorMap ftape_get_bad_sector_entry(int segment_id); -extern __u8 *ftape_find_end_of_bsm_list(__u8 * address); -extern void ftape_init_bsm(void); - -#endif diff --git a/drivers/char/ftape/lowlevel/ftape-buffer.c b/drivers/char/ftape/lowlevel/ftape-buffer.c deleted file mode 100644 index c706ff16277..00000000000 --- a/drivers/char/ftape/lowlevel/ftape-buffer.c +++ /dev/null @@ -1,130 +0,0 @@ -/* - * Copyright (C) 1997 Claus-Justus Heine - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; see the file COPYING. If not, write to - the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - - * - * $Source: /homes/cvs/ftape-stacked/ftape/lowlevel/ftape-buffer.c,v $ - * $Revision: 1.3 $ - * $Date: 1997/10/16 23:33:11 $ - * - * This file contains the allocator/dealloctor for ftape's dynamic dma - * buffer. - */ - -#include <linux/slab.h> -#include <linux/mm.h> -#include <linux/mman.h> -#include <asm/dma.h> - -#include <linux/ftape.h> -#include "../lowlevel/ftape-rw.h" -#include "../lowlevel/ftape-read.h" -#include "../lowlevel/ftape-tracing.h" -#include "../lowlevel/ftape-buffer.h" - -/* DMA'able memory allocation stuff. - */ - -static inline void *dmaalloc(size_t size) -{ - unsigned long addr; - - if (size == 0) { - return NULL; - } - addr = __get_dma_pages(GFP_KERNEL, get_order(size)); - if (addr) { - struct page *page; - - for (page = virt_to_page(addr); page < virt_to_page(addr+size); page++) - SetPageReserved(page); - } - return (void *)addr; -} - -static inline void dmafree(void *addr, size_t size) -{ - if (size > 0) { - struct page *page; - - for (page = virt_to_page((unsigned long)addr); - page < virt_to_page((unsigned long)addr+size); page++) - ClearPageReserved(page); - free_pages((unsigned long) addr, get_order(size)); - } -} - -static int add_one_buffer(void) -{ - TRACE_FUN(ft_t_flow); - - if (ft_nr_buffers >= FT_MAX_NR_BUFFERS) { - TRACE_EXIT -ENOMEM; - } - ft_buffer[ft_nr_buffers] = kmalloc(sizeof(buffer_struct), GFP_KERNEL); - if (ft_buffer[ft_nr_buffers] == NULL) { - TRACE_EXIT -ENOMEM; - } - memset(ft_buffer[ft_nr_buffers], 0, sizeof(buffer_struct)); - ft_buffer[ft_nr_buffers]->address = dmaalloc(FT_BUFF_SIZE); - if (ft_buffer[ft_nr_buffers]->address == NULL) { - kfree(ft_buffer[ft_nr_buffers]); - ft_buffer[ft_nr_buffers] = NULL; - TRACE_EXIT -ENOMEM; - } - ft_nr_buffers ++; - TRACE(ft_t_info, "buffer nr #%d @ %p, dma area @ %p", - ft_nr_buffers, - ft_buffer[ft_nr_buffers-1], - ft_buffer[ft_nr_buffers-1]->address); - TRACE_EXIT 0; -} - -static void del_one_buffer(void) -{ - TRACE_FUN(ft_t_flow); - if (ft_nr_buffers > 0) { - TRACE(ft_t_info, "releasing buffer nr #%d @ %p, dma area @ %p", - ft_nr_buffers, - ft_buffer[ft_nr_buffers-1], - ft_buffer[ft_nr_buffers-1]->address); - ft_nr_buffers --; - dmafree(ft_buffer[ft_nr_buffers]->address, FT_BUFF_SIZE); - kfree(ft_buffer[ft_nr_buffers]); - ft_buffer[ft_nr_buffers] = NULL; - } - TRACE_EXIT; -} - -int ftape_set_nr_buffers(int cnt) -{ - int delta = cnt - ft_nr_buffers; - TRACE_FUN(ft_t_flow); - - if (delta > 0) { - while (delta--) { - if (add_one_buffer() < 0) { - TRACE_EXIT -ENOMEM; - } - } - } else if (delta < 0) { - while (delta++) { - del_one_buffer(); - } - } - ftape_zap_read_buffers(); - TRACE_EXIT 0; -} diff --git a/drivers/char/ftape/lowlevel/ftape-buffer.h b/drivers/char/ftape/lowlevel/ftape-buffer.h deleted file mode 100644 index eec99cee8f8..00000000000 --- a/drivers/char/ftape/lowlevel/ftape-buffer.h +++ /dev/null @@ -1,32 +0,0 @@ -#ifndef _FTAPE_BUFFER_H -#define _FTAPE_BUFFER_H - -/* - * Copyright (C) 1997 Claus-Justus Heine. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; see the file COPYING. If not, write to - the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - - * - * $Source: /homes/cvs/ftape-stacked/ftape/lowlevel/ftape-buffer.h,v $ - * $Revision: 1.2 $ - * $Date: 1997/10/05 19:18:08 $ - * - * This file contains the allocator/dealloctor for ftape's dynamic dma - * buffer. - */ - -extern int ftape_set_nr_buffers(int cnt); - -#endif diff --git a/drivers/char/ftape/lowlevel/ftape-calibr.c b/drivers/char/ftape/lowlevel/ftape-calibr.c deleted file mode 100644 index 8e50bfd35a5..00000000000 --- a/drivers/char/ftape/lowlevel/ftape-calibr.c +++ /dev/null @@ -1,275 +0,0 @@ -/* - * Copyright (C) 1993-1996 Bas Laarhoven. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; see the file COPYING. If not, write to - the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - - * - * $Source: /homes/cvs/ftape-stacked/ftape/lowlevel/ftape-calibr.c,v $ - * $Revision: 1.2 $ - * $Date: 1997/10/05 19:18:08 $ - * - * GP calibration routine for processor speed dependent - * functions. - */ - -#include <linux/errno.h> -#include <linux/jiffies.h> -#include <asm/system.h> -#include <asm/io.h> -#if defined(__alpha__) -# include <asm/hwrpb.h> -#elif defined(__x86_64__) -# include <asm/msr.h> -# include <asm/timex.h> -#elif defined(__i386__) -# include <linux/timex.h> -#endif -#include <linux/ftape.h> -#include "../lowlevel/ftape-tracing.h" -#include "../lowlevel/ftape-calibr.h" -#include "../lowlevel/fdc-io.h" - -#undef DEBUG - -#if !defined(__alpha__) && !defined(__i386__) && !defined(__x86_64__) -# error Ftape is not implemented for this architecture! -#endif - -#if defined(__alpha__) || defined(__x86_64__) -static unsigned long ps_per_cycle = 0; -#endif - -static spinlock_t calibr_lock; - -/* - * Note: On Intel PCs, the clock ticks at 100 Hz (HZ==100) which is - * too slow for certain timeouts (and that clock doesn't even tick - * when interrupts are disabled). For that reason, the 8254 timer is - * used directly to implement fine-grained timeouts. However, on - * Alpha PCs, the 8254 is *not* used to implement the clock tick - * (which is 1024 Hz, normally) and the 8254 timer runs at some - * "random" frequency (it seems to run at 18Hz, but it's not safe to - * rely on this value). Instead, we use the Alpha's "rpcc" - * instruction to read cycle counts. As this is a 32 bit counter, - * it will overflow only once per 30 seconds (on a 200MHz machine), - * which is plenty. - */ - -unsigned int ftape_timestamp(void) -{ -#if defined(__alpha__) - unsigned long r; - - asm volatile ("rpcc %0" : "=r" (r)); - return r; -#elif defined(__x86_64__) - unsigned long r; - rdtscl(r); - return r; -#elif defined(__i386__) - -/* - * Note that there is some time between counter underflowing and jiffies - * increasing, so the code below won't always give correct output. - * -Vojtech - */ - - unsigned long flags; - __u16 lo; - __u16 hi; - - spin_lock_irqsave(&calibr_lock, flags); - outb_p(0x00, 0x43); /* latch the count ASAP */ - lo = inb_p(0x40); /* read the latched count */ - lo |= inb(0x40) << 8; - hi = jiffies; - spin_unlock_irqrestore(&calibr_lock, flags); - return ((hi + 1) * (unsigned int) LATCH) - lo; /* downcounter ! */ -#endif -} - -static unsigned int short_ftape_timestamp(void) -{ -#if defined(__alpha__) || defined(__x86_64__) - return ftape_timestamp(); -#elif defined(__i386__) - unsigned int count; - unsigned long flags; - - spin_lock_irqsave(&calibr_lock, flags); - outb_p(0x00, 0x43); /* latch the count ASAP */ - count = inb_p(0x40); /* read the latched count */ - count |= inb(0x40) << 8; - spin_unlock_irqrestore(&calibr_lock, flags); - return (LATCH - count); /* normal: downcounter */ -#endif -} - -static unsigned int diff(unsigned int t0, unsigned int t1) -{ -#if defined(__alpha__) || defined(__x86_64__) - return (t1 - t0); -#elif defined(__i386__) - /* - * This is tricky: to work for both short and full ftape_timestamps - * we'll have to discriminate between these. - * If it _looks_ like short stamps with wrapping around we'll - * asume it are. This will generate a small error if it really - * was a (very large) delta from full ftape_timestamps. - */ - return (t1 <= t0 && t0 <= LATCH) ? t1 + LATCH - t0 : t1 - t0; -#endif -} - -static unsigned int usecs(unsigned int count) -{ -#if defined(__alpha__) || defined(__x86_64__) - return (ps_per_cycle * count) / 1000000UL; -#elif defined(__i386__) - return (10000 * count) / ((CLOCK_TICK_RATE + 50) / 100); -#endif -} - -unsigned int ftape_timediff(unsigned int t0, unsigned int t1) -{ - /* - * Calculate difference in usec for ftape_timestamp results t0 & t1. - * Note that on the i386 platform with short time-stamps, the - * maximum allowed timespan is 1/HZ or we'll lose ticks! - */ - return usecs(diff(t0, t1)); -} - -/* To get an indication of the I/O performance, - * measure the duration of the inb() function. - */ -static void time_inb(void) -{ - int i; - int t0, t1; - unsigned long flags; - int status; - TRACE_FUN(ft_t_any); - - spin_lock_irqsave(&calibr_lock, flags); - t0 = short_ftape_timestamp(); - for (i = 0; i < 1000; ++i) { - status = inb(fdc.msr); - } - t1 = short_ftape_timestamp(); - spin_unlock_irqrestore(&calibr_lock, flags); - TRACE(ft_t_info, "inb() duration: %d nsec", ftape_timediff(t0, t1)); - TRACE_EXIT; -} - -static void init_clock(void) -{ - TRACE_FUN(ft_t_any); - -#if defined(__x86_64__) - ps_per_cycle = 1000000000UL / cpu_khz; -#elif defined(__alpha__) - extern struct hwrpb_struct *hwrpb; - ps_per_cycle = (1000*1000*1000*1000UL) / hwrpb->cycle_freq; -#endif - TRACE_EXIT; -} - -/* - * Input: function taking int count as parameter. - * pointers to calculated calibration variables. - */ -void ftape_calibrate(char *name, - void (*fun) (unsigned int), - unsigned int *calibr_count, - unsigned int *calibr_time) -{ - static int first_time = 1; - int i; - unsigned int tc = 0; - unsigned int count; - unsigned int time; -#if defined(__i386__) - unsigned int old_tc = 0; - unsigned int old_count = 1; - unsigned int old_time = 1; -#endif - TRACE_FUN(ft_t_flow); - - if (first_time) { /* get idea of I/O performance */ - init_clock(); - time_inb(); - first_time = 0; - } - /* value of timeout must be set so that on very slow systems - * it will give a time less than one jiffy, and on - * very fast systems it'll give reasonable precision. - */ - - count = 40; - for (i = 0; i < 15; ++i) { - unsigned int t0; - unsigned int t1; - unsigned int once; - unsigned int multiple; - unsigned long flags; - - *calibr_count = - *calibr_time = count; /* set TC to 1 */ - spin_lock_irqsave(&calibr_lock, flags); - fun(0); /* dummy, get code into cache */ - t0 = short_ftape_timestamp(); - fun(0); /* overhead + one test */ - t1 = short_ftape_timestamp(); - once = diff(t0, t1); - t0 = short_ftape_timestamp(); - fun(count); /* overhead + count tests */ - t1 = short_ftape_timestamp(); - multiple = diff(t0, t1); - spin_unlock_irqrestore(&calibr_lock, flags); - time = ftape_timediff(0, multiple - once); - tc = (1000 * time) / (count - 1); - TRACE(ft_t_any, "once:%3d us,%6d times:%6d us, TC:%5d ns", - usecs(once), count - 1, usecs(multiple), tc); -#if defined(__alpha__) || defined(__x86_64__) - /* - * Increase the calibration count exponentially until the - * calibration time exceeds 100 ms. - */ - if (time >= 100*1000) { - break; - } -#elif defined(__i386__) - /* - * increase the count until the resulting time nears 2/HZ, - * then the tc will drop sharply because we lose LATCH counts. - */ - if (tc <= old_tc / 2) { - time = old_time; - count = old_count; - break; - } - old_tc = tc; - old_count = count; - old_time = time; -#endif - count *= 2; - } - *calibr_count = count - 1; - *calibr_time = time; - TRACE(ft_t_info, "TC for `%s()' = %d nsec (at %d counts)", - name, (1000 * *calibr_time) / *calibr_count, *calibr_count); - TRACE_EXIT; -} diff --git a/drivers/char/ftape/lowlevel/ftape-calibr.h b/drivers/char/ftape/lowlevel/ftape-calibr.h deleted file mode 100644 index 0c7e75246c7..00000000000 --- a/drivers/char/ftape/lowlevel/ftape-calibr.h +++ /dev/null @@ -1,37 +0,0 @@ -#ifndef _FTAPE_CALIBR_H -#define _FTAPE_CALIBR_H - -/* - * Copyright (C) 1993-1996 Bas Laarhoven. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; see the file COPYING. If not, write to - the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - - * - * $Source: /homes/cvs/ftape-stacked/ftape/lowlevel/ftape-calibr.h,v $ - * $Revision: 1.1 $ - * $Date: 1997/09/19 09:05:26 $ - * - * This file contains a gp calibration routine for - * hardware dependent timeout functions. - */ - -extern void ftape_calibrate(char *name, - void (*fun) (unsigned int), - unsigned int *calibr_count, - unsigned int *calibr_time); -extern unsigned int ftape_timestamp(void); -extern unsigned int ftape_timediff(unsigned int t0, unsigned int t1); - -#endif /* _FTAPE_CALIBR_H */ diff --git a/drivers/char/ftape/lowlevel/ftape-ctl.c b/drivers/char/ftape/lowlevel/ftape-ctl.c deleted file mode 100644 index 5d7c1ce92d5..00000000000 --- a/drivers/char/ftape/lowlevel/ftape-ctl.c +++ /dev/null @@ -1,896 +0,0 @@ -/* - * Copyright (C) 1993-1996 Bas Laarhoven, - * 1996-1997 Claus-Justus Heine. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; see the file COPYING. If not, write to - the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - - * - * $Source: /homes/cvs/ftape-stacked/ftape/lowlevel/ftape-ctl.c,v $ - * $Revision: 1.4 $ - * $Date: 1997/11/11 14:37:44 $ - * - * This file contains the non-read/write ftape functions for the - * QIC-40/80/3010/3020 floppy-tape driver "ftape" for Linux. - */ - -#include <linux/errno.h> -#include <linux/mm.h> -#include <linux/mman.h> - -#include <linux/ftape.h> -#include <linux/qic117.h> -#include <asm/uaccess.h> -#include <asm/io.h> - -/* ease porting between pre-2.4.x and later kernels */ -#define vma_get_pgoff(v) ((v)->vm_pgoff) - -#include "../lowlevel/ftape-tracing.h" -#include "../lowlevel/ftape-io.h" -#include "../lowlevel/ftape-ctl.h" -#include "../lowlevel/ftape-write.h" -#include "../lowlevel/ftape-read.h" -#include "../lowlevel/ftape-rw.h" -#include "../lowlevel/ftape-bsm.h" - -/* Global vars. - */ -ftape_info ftape_status = { -/* vendor information */ - { 0, }, /* drive type */ -/* data rates */ - 500, /* used data rate */ - 500, /* drive max rate */ - 500, /* fdc max rate */ -/* drive selection, either FTAPE_SEL_A/B/C/D */ - -1, /* drive selection */ -/* flags set after decode the drive and tape status */ - 0, /* formatted */ - 1, /* no tape */ - 1, /* write protected */ - 1, /* new tape */ -/* values of last queried drive/tape status and error */ - {{0,}}, /* last error code */ - {{0,}}, /* drive status, configuration, tape status */ -/* cartridge geometry */ - 20, /* tracks_per_tape */ - 102, /* segments_per_track */ -/* location of header segments, etc. */ - -1, /* used_header_segment */ - -1, /* header_segment_1 */ - -1, /* header_segment_2 */ - -1, /* first_data_segment */ - -1, /* last_data_segment */ -/* the format code as stored in the header segment */ - fmt_normal, /* format code */ -/* the default for the qic std: unknown */ - -1, -/* is tape running? */ - idle, /* runner_state */ -/* is tape reading/writing/verifying/formatting/deleting */ - idle, /* driver state */ -/* flags fatal hardware error */ - 1, /* failure */ -/* history record */ - { 0, } /* history record */ -}; - -int ftape_segments_per_head = 1020; -int ftape_segments_per_cylinder = 4; -int ftape_init_drive_needed = 1; /* need to be global for ftape_reset_drive() - * in ftape-io.c - */ - -/* Local vars. - */ -static const vendor_struct vendors[] = QIC117_VENDORS; -static const wakeup_method methods[] = WAKEUP_METHODS; - -const ftape_info *ftape_get_status(void) -{ -#if defined(STATUS_PARANOYA) - static ftape_info get_status; - - get_status = ftape_status; - return &get_status; -#else - return &ftape_status; /* maybe return only a copy of it to assure - * read only access - */ -#endif -} - -static int ftape_not_operational(int status) -{ - /* return true if status indicates tape can not be used. - */ - return ((status ^ QIC_STATUS_CARTRIDGE_PRESENT) & - (QIC_STATUS_ERROR | - QIC_STATUS_CARTRIDGE_PRESENT | - QIC_STATUS_NEW_CARTRIDGE)); -} - -int ftape_seek_to_eot(void) -{ - int status; - TRACE_FUN(ft_t_any); - - TRACE_CATCH(ftape_ready_wait(ftape_timeout.pause, &status),); - while ((status & QIC_STATUS_AT_EOT) == 0) { - if (ftape_not_operational(status)) { - TRACE_EXIT -EIO; - } - TRACE_CATCH(ftape_command_wait(QIC_PHYSICAL_FORWARD, - ftape_timeout.rewind,&status),); - } - TRACE_EXIT 0; -} - -int ftape_seek_to_bot(void) -{ - int status; - TRACE_FUN(ft_t_any); - - TRACE_CATCH(ftape_ready_wait(ftape_timeout.pause, &status),); - while ((status & QIC_STATUS_AT_BOT) == 0) { - if (ftape_not_operational(status)) { - TRACE_EXIT -EIO; - } - TRACE_CATCH(ftape_command_wait(QIC_PHYSICAL_REVERSE, - ftape_timeout.rewind,&status),); - } - TRACE_EXIT 0; -} - -static int ftape_new_cartridge(void) -{ - ft_location.track = -1; /* force seek on first access */ - ftape_zap_read_buffers(); - ftape_zap_write_buffers(); - return 0; -} - -int ftape_abort_operation(void) -{ - int result = 0; - int status; - TRACE_FUN(ft_t_flow); - - if (ft_runner_status == running) { - TRACE(ft_t_noise, "aborting runner, waiting"); - - ft_runner_status = do_abort; - /* set timeout so that the tape will run to logical EOT - * if we missed the last sector and there are no queue pulses. - */ - result = ftape_dumb_stop(); - } - if (ft_runner_status != idle) { - if (ft_runner_status == do_abort) { - TRACE(ft_t_noise, "forcing runner abort"); - } - TRACE(ft_t_noise, "stopping tape"); - result = ftape_stop_tape(&status); - ft_location.known = 0; - ft_runner_status = idle; - } - ftape_reset_buffer(); - ftape_zap_read_buffers(); - ftape_set_state(idle); - TRACE_EXIT result; -} - -static int lookup_vendor_id(unsigned int vendor_id) -{ - int i = 0; - - while (vendors[i].vendor_id != vendor_id) { - if (++i >= NR_ITEMS(vendors)) { - return -1; - } - } - return i; -} - -static void ftape_detach_drive(void) -{ - TRACE_FUN(ft_t_any); - - TRACE(ft_t_flow, "disabling tape drive and fdc"); - ftape_put_drive_to_sleep(ft_drive_type.wake_up); - fdc_catch_stray_interrupts(1); /* one always comes */ - fdc_disable(); - fdc_release_irq_and_dma(); - fdc_release_regions(); - TRACE_EXIT; -} - -static void clear_history(void) -{ - ft_history.used = 0; - ft_history.id_am_errors = - ft_history.id_crc_errors = - ft_history.data_am_errors = - ft_history.data_crc_errors = - ft_history.overrun_errors = - ft_history.no_data_errors = - ft_history.retries = - ft_history.crc_errors = - ft_history.crc_failures = - ft_history.ecc_failures = - ft_history.corrected = - ft_history.defects = - ft_history.rewinds = 0; -} - -static int ftape_activate_drive(vendor_struct * drive_type) -{ - int result = 0; - TRACE_FUN(ft_t_flow); - - /* If we already know the drive type, wake it up. - * Else try to find out what kind of drive is attached. - */ - if (drive_type->wake_up != unknown_wake_up) { - TRACE(ft_t_flow, "enabling tape drive and fdc"); - result = ftape_wakeup_drive(drive_type->wake_up); - if (result < 0) { - TRACE(ft_t_err, "known wakeup method failed"); - } - } else { - wake_up_types method; - const ft_trace_t old_tracing = TRACE_LEVEL; - if (TRACE_LEVEL < ft_t_flow) { - SET_TRACE_LEVEL(ft_t_bug); - } - - /* Try to awaken the drive using all known methods. - * Lower tracing for a while. - */ - for (method=no_wake_up; method < NR_ITEMS(methods); ++method) { - drive_type->wake_up = method; -#ifdef CONFIG_FT_TWO_DRIVES - /* Test setup for dual drive configuration. - * /dev/rft2 uses mountain wakeup - * /dev/rft3 uses colorado wakeup - * Other systems will use the normal scheme. - */ - if ((ft_drive_sel < 2) || - (ft_drive_sel == 2 && method == FT_WAKE_UP_1) || - (ft_drive_sel == 3 && method == FT_WAKE_UP_2)) { - result=ftape_wakeup_drive(drive_type->wake_up); - } else { - result = -EIO; - } -#else - result = ftape_wakeup_drive(drive_type->wake_up); -#endif - if (result >= 0) { - TRACE(ft_t_warn, "drive wakeup method: %s", - methods[drive_type->wake_up].name); - break; - } - } - SET_TRACE_LEVEL(old_tracing); - - if (method >= NR_ITEMS(methods)) { - /* no response at all, cannot open this drive */ - drive_type->wake_up = unknown_wake_up; - TRACE(ft_t_err, "no tape drive found !"); - result = -ENODEV; - } - } - TRACE_EXIT result; -} - -static int ftape_get_drive_status(void) -{ - int result; - int status; - TRACE_FUN(ft_t_flow); - - ft_no_tape = ft_write_protected = 0; - /* Tape drive is activated now. - * First clear error status if present. - */ - do { - result = ftape_ready_wait(ftape_timeout.reset, &status); - if (result < 0) { - if (result == -ETIME) { - TRACE(ft_t_err, "ftape_ready_wait timeout"); - } else if (result == -EINTR) { - TRACE(ft_t_err, "ftape_ready_wait aborted"); - } else { - TRACE(ft_t_err, "ftape_ready_wait failed"); - } - TRACE_EXIT -EIO; - } - /* Clear error condition (drive is ready !) - */ - if (status & QIC_STATUS_ERROR) { - unsigned int error; - qic117_cmd_t command; - - TRACE(ft_t_err, "error status set"); - result = ftape_report_error(&error, &command, 1); - if (result < 0) { - TRACE(ft_t_err, - "report_error_code failed: %d", result); - /* hope it's working next time */ - ftape_reset_drive(); - TRACE_EXIT -EIO; - } else if (error != 0) { - TRACE(ft_t_noise, "error code : %d", error); - TRACE(ft_t_noise, "error command: %d", command); - } - } - if (status & QIC_STATUS_NEW_CARTRIDGE) { - unsigned int error; - qic117_cmd_t command; - const ft_trace_t old_tracing = TRACE_LEVEL; - SET_TRACE_LEVEL(ft_t_bug); - - /* Undocumented feature: Must clear (not present!) - * error here or we'll fail later. - */ - ftape_report_error(&error, &command, 1); - - SET_TRACE_LEVEL(old_tracing); - TRACE(ft_t_info, "status: new cartridge"); - ft_new_tape = 1; - } else { - ft_new_tape = 0; - } - FT_SIGNAL_EXIT(_DONT_BLOCK); - } while (status & QIC_STATUS_ERROR); - - ft_no_tape = !(status & QIC_STATUS_CARTRIDGE_PRESENT); - ft_write_protected = (status & QIC_STATUS_WRITE_PROTECT) != 0; - if (ft_no_tape) { - TRACE(ft_t_warn, "no cartridge present"); - } else { - if (ft_write_protected) { - TRACE(ft_t_noise, "Write protected cartridge"); - } - } - TRACE_EXIT 0; -} - -static void ftape_log_vendor_id(void) -{ - int vendor_index; - TRACE_FUN(ft_t_flow); - - ftape_report_vendor_id(&ft_drive_type.vendor_id); - vendor_index = lookup_vendor_id(ft_drive_type.vendor_id); - if (ft_drive_type.vendor_id == UNKNOWN_VENDOR && - ft_drive_type.wake_up == wake_up_colorado) { - vendor_index = 0; - /* hack to get rid of all this mail */ - ft_drive_type.vendor_id = 0; - } - if (vendor_index < 0) { - /* Unknown vendor id, first time opening device. The - * drive_type remains set to type found at wakeup - * time, this will probably keep the driver operating - * for this new vendor. - */ - TRACE(ft_t_warn, "\n" - KERN_INFO "============ unknown vendor id ===========\n" - KERN_INFO "A new, yet unsupported tape drive is found\n" - KERN_INFO "Please report the following values:\n" - KERN_INFO " Vendor id : 0x%04x\n" - KERN_INFO " Wakeup method : %s\n" - KERN_INFO "And a description of your tape drive\n" - KERN_INFO "to "THE_FTAPE_MAINTAINER"\n" - KERN_INFO "==========================================", - ft_drive_type.vendor_id, - methods[ft_drive_type.wake_up].name); - ft_drive_type.speed = 0; /* unknown */ - } else { - ft_drive_type.name = vendors[vendor_index].name; - ft_drive_type.speed = vendors[vendor_index].speed; - TRACE(ft_t_info, "tape drive type: %s", ft_drive_type.name); - /* scan all methods for this vendor_id in table */ - while(ft_drive_type.wake_up != vendors[vendor_index].wake_up) { - if (vendor_index < NR_ITEMS(vendors) - 1 && - vendors[vendor_index + 1].vendor_id - == - ft_drive_type.vendor_id) { - ++vendor_index; - } else { - break; - } - } - if (ft_drive_type.wake_up != vendors[vendor_index].wake_up) { - TRACE(ft_t_warn, "\n" - KERN_INFO "==========================================\n" - KERN_INFO "wakeup type mismatch:\n" - KERN_INFO "found: %s, expected: %s\n" - KERN_INFO "please report this to "THE_FTAPE_MAINTAINER"\n" - KERN_INFO "==========================================", - methods[ft_drive_type.wake_up].name, - methods[vendors[vendor_index].wake_up].name); - } - } - TRACE_EXIT; -} - -void ftape_calc_timeouts(unsigned int qic_std, - unsigned int data_rate, - unsigned int tape_len) -{ - int speed; /* deci-ips ! */ - int ff_speed; - int length; - TRACE_FUN(ft_t_any); - - /* tape transport speed - * data rate: QIC-40 QIC-80 QIC-3010 QIC-3020 - * - * 250 Kbps 25 ips n/a n/a n/a - * 500 Kbps 50 ips 34 ips 22.6 ips n/a - * 1 Mbps n/a 68 ips 45.2 ips 22.6 ips - * 2 Mbps n/a n/a n/a 45.2 ips - * - * fast tape transport speed is at least 68 ips. - */ - switch (qic_std) { - case QIC_TAPE_QIC40: - speed = (data_rate == 250) ? 250 : 500; - break; - case QIC_TAPE_QIC80: - speed = (data_rate == 500) ? 340 : 680; - break; - case QIC_TAPE_QIC3010: - speed = (data_rate == 500) ? 226 : 452; - break; - case QIC_TAPE_QIC3020: - speed = (data_rate == 1000) ? 226 : 452; - break; - default: - TRACE(ft_t_bug, "Unknown qic_std (bug) ?"); - speed = 500; - break; - } - if (ft_drive_type.speed == 0) { - unsigned long t0; - static int dt = 0; /* keep gcc from complaining */ - static int first_time = 1; - - /* Measure the time it takes to wind to EOT and back to BOT. - * If the tape length is known, calculate the rewind speed. - * Else keep the time value for calculation of the rewind - * speed later on, when the length _is_ known. - * Ask for a report only when length and speed are both known. - */ - if (first_time) { - ftape_seek_to_bot(); - t0 = jiffies; - ftape_seek_to_eot(); - ftape_seek_to_bot(); - dt = (int) (((jiffies - t0) * FT_USPT) / 1000); - if (dt < 1) { - dt = 1; /* prevent div by zero on failures */ - } - first_time = 0; - TRACE(ft_t_info, - "trying to determine seek timeout, got %d msec", - dt); - } - if (tape_len != 0) { - ft_drive_type.speed = - (2 * 12 * tape_len * 1000) / dt; - TRACE(ft_t_warn, "\n" - KERN_INFO "==========================================\n" - KERN_INFO "drive type: %s\n" - KERN_INFO "delta time = %d ms, length = %d ft\n" - KERN_INFO "has a maximum tape speed of %d ips\n" - KERN_INFO "please report this to "THE_FTAPE_MAINTAINER"\n" - KERN_INFO "==========================================", - ft_drive_type.name, dt, tape_len, - ft_drive_type.speed); - } - } - /* Handle unknown length tapes as very long ones. We'll - * determine the actual length from a header segment later. - * This is normal for all modern (Wide,TR1/2/3) formats. - */ - if (tape_len <= 0) { - TRACE(ft_t_noise, - "Unknown tape length, using maximal timeouts"); - length = QIC_TOP_TAPE_LEN; /* use worst case values */ - } else { - length = tape_len; /* use actual values */ - } - if (ft_drive_type.speed == 0) { - ff_speed = speed; - } else { - ff_speed = ft_drive_type.speed; - } - /* time to go from bot to eot at normal speed (data rate): - * time = (1+delta) * length (ft) * 12 (inch/ft) / speed (ips) - * delta = 10 % for seek speed, 20 % for rewind speed. - */ - ftape_timeout.seek = (length * 132 * FT_SECOND) / speed; - ftape_timeout.rewind = (length * 144 * FT_SECOND) / (10 * ff_speed); - ftape_timeout.reset = 20 * FT_SECOND + ftape_timeout.rewind; - TRACE(ft_t_noise, "timeouts for speed = %d, length = %d\n" - KERN_INFO "seek timeout : %d sec\n" - KERN_INFO "rewind timeout: %d sec\n" - KERN_INFO "reset timeout : %d sec", - speed, length, - (ftape_timeout.seek + 500) / 1000, - (ftape_timeout.rewind + 500) / 1000, - (ftape_timeout.reset + 500) / 1000); - TRACE_EXIT; -} - -/* This function calibrates the datarate (i.e. determines the maximal - * usable data rate) and sets the global variable ft_qic_std to qic_std - * - */ -int ftape_calibrate_data_rate(unsigned int qic_std) -{ - int rate = ft_fdc_rate_limit; - int result; - TRACE_FUN(ft_t_flow); - - ft_qic_std = qic_std; - - if (ft_qic_std == -1) { - TRACE_ABORT(-EIO, ft_t_err, - "Unable to determine data rate if QIC standard is unknown"); - } - - /* Select highest rate supported by both fdc and drive. - * Start with highest rate supported by the fdc. - */ - while (fdc_set_data_rate(rate) < 0 && rate > 250) { - rate /= 2; - } - TRACE(ft_t_info, - "Highest FDC supported data rate: %d Kbps", rate); - ft_fdc_max_rate = rate; - do { - result = ftape_set_data_rate(rate, ft_qic_std); - } while (result == -EINVAL && (rate /= 2) > 250); - if (result < 0) { - TRACE_ABORT(-EIO, ft_t_err, "set datarate failed"); - } - ft_data_rate = rate; - TRACE_EXIT 0; -} - -static int ftape_init_drive(void) -{ - int status; - qic_model model; - unsigned int qic_std; - unsigned int data_rate; - TRACE_FUN(ft_t_flow); - - ftape_init_drive_needed = 0; /* don't retry if this fails ? */ - TRACE_CATCH(ftape_report_raw_drive_status(&status),); - if (status & QIC_STATUS_CARTRIDGE_PRESENT) { - if (!(status & QIC_STATUS_AT_BOT)) { - /* Antique drives will get here after a soft reset, - * modern ones only if the driver is loaded when the - * tape wasn't rewound properly. - */ - /* Tape should be at bot if new cartridge ! */ - ftape_seek_to_bot(); - } - if (!(status & QIC_STATUS_REFERENCED)) { - TRACE(ft_t_flow, "starting seek_load_point"); - TRACE_CATCH(ftape_command_wait(QIC_SEEK_LOAD_POINT, - ftape_timeout.reset, - &status),); - } - } - ft_formatted = (status & QIC_STATUS_REFERENCED) != 0; - if (!ft_formatted) { - TRACE(ft_t_warn, "Warning: tape is not formatted !"); - } - - /* report configuration aborts when ftape_tape_len == -1 - * unknown qic_std is okay if not formatted. - */ - TRACE_CATCH(ftape_report_configuration(&model, - &data_rate, - &qic_std, - &ftape_tape_len),); - - /* Maybe add the following to the /proc entry - */ - TRACE(ft_t_info, "%s drive @ %d Kbps", - (model == prehistoric) ? "prehistoric" : - ((model == pre_qic117c) ? "pre QIC-117C" : - ((model == post_qic117b) ? "post QIC-117B" : - "post QIC-117D")), data_rate); - - if (ft_formatted) { - /* initialize ft_used_data_rate to maximum value - * and set ft_qic_std - */ - TRACE_CATCH(ftape_calibrate_data_rate(qic_std),); - if (ftape_tape_len == 0) { - TRACE(ft_t_info, "unknown length QIC-%s tape", - (ft_qic_std == QIC_TAPE_QIC40) ? "40" : - ((ft_qic_std == QIC_TAPE_QIC80) ? "80" : - ((ft_qic_std == QIC_TAPE_QIC3010) - ? "3010" : "3020"))); - } else { - TRACE(ft_t_info, "%d ft. QIC-%s tape", ftape_tape_len, - (ft_qic_std == QIC_TAPE_QIC40) ? "40" : - ((ft_qic_std == QIC_TAPE_QIC80) ? "80" : - ((ft_qic_std == QIC_TAPE_QIC3010) - ? "3010" : "3020"))); - } - ftape_calc_timeouts(ft_qic_std, ft_data_rate, ftape_tape_len); - /* soft write-protect QIC-40/QIC-80 cartridges used with a - * Colorado T3000 drive. Buggy hardware! - */ - if ((ft_drive_type.vendor_id == 0x011c6) && - ((ft_qic_std == QIC_TAPE_QIC40 || - ft_qic_std == QIC_TAPE_QIC80) && - !ft_write_protected)) { - TRACE(ft_t_warn, "\n" - KERN_INFO "The famous Colorado T3000 bug:\n" - KERN_INFO "%s drives can't write QIC40 and QIC80\n" - KERN_INFO "cartridges but don't set the write-protect flag!", - ft_drive_type.name); - ft_write_protected = 1; - } - } else { - /* Doesn't make too much sense to set the data rate - * because we don't know what to use for the write - * precompensation. - * Need to do this again when formatting the cartridge. - */ - ft_data_rate = data_rate; - ftape_calc_timeouts(QIC_TAPE_QIC40, - data_rate, - ftape_tape_len); - } - ftape_new_cartridge(); - TRACE_EXIT 0; -} - -static void ftape_munmap(void) -{ - int i; - TRACE_FUN(ft_t_flow); - - for (i = 0; i < ft_nr_buffers; i++) { - ft_buffer[i]->mmapped = 0; - } - TRACE_EXIT; -} - -/* Map the dma buffers into the virtual address range given by vma. - * We only check the caller doesn't map non-existent buffers. We - * don't check for multiple mappings. - */ -int ftape_mmap(struct vm_area_struct *vma) -{ - int num_buffers; - int i; - TRACE_FUN(ft_t_flow); - - if (ft_failure) { - TRACE_EXIT -ENODEV; - } - if (!(vma->vm_flags & (VM_READ|VM_WRITE))) { - TRACE_ABORT(-EINVAL, ft_t_err, "Undefined mmap() access"); - } - if (vma_get_pgoff(vma) != 0) { - TRACE_ABORT(-EINVAL, ft_t_err, "page offset must be 0"); - } - if ((vma->vm_end - vma->vm_start) % FT_BUFF_SIZE != 0) { - TRACE_ABORT(-EINVAL, ft_t_err, - "size = %ld, should be a multiple of %d", - vma->vm_end - vma->vm_start, - FT_BUFF_SIZE); - } - num_buffers = (vma->vm_end - vma->vm_start) / FT_BUFF_SIZE; - if (num_buffers > ft_nr_buffers) { - TRACE_ABORT(-EINVAL, - ft_t_err, "size = %ld, should be less than %d", - vma->vm_end - vma->vm_start, - ft_nr_buffers * FT_BUFF_SIZE); - } - if (ft_driver_state != idle) { - /* this also clears the buffer states - */ - ftape_abort_operation(); - } else { - ftape_reset_buffer(); - } - for (i = 0; i < num_buffers; i++) { - unsigned long pfn; - - pfn = virt_to_phys(ft_buffer[i]->address) >> PAGE_SHIFT; - TRACE_CATCH(remap_pfn_range(vma, vma->vm_start + - i * FT_BUFF_SIZE, - pfn, - FT_BUFF_SIZE, - vma->vm_page_prot), - _res = -EAGAIN); - TRACE(ft_t_noise, "remapped dma buffer @ %p to location @ %p", - ft_buffer[i]->address, - (void *)(vma->vm_start + i * FT_BUFF_SIZE)); - } - for (i = 0; i < num_buffers; i++) { - memset(ft_buffer[i]->address, 0xAA, FT_BUFF_SIZE); - ft_buffer[i]->mmapped++; - } - TRACE_EXIT 0; -} - -static void ftape_init_driver(void); /* forward declaration */ - -/* OPEN routine called by kernel-interface code - */ -int ftape_enable(int drive_selection) -{ - TRACE_FUN(ft_t_any); - - if (ft_drive_sel == -1 || ft_drive_sel != drive_selection) { - /* Other selection than last time - */ - ftape_init_driver(); - } - ft_drive_sel = FTAPE_SEL(drive_selection); - ft_failure = 0; - TRACE_CATCH(fdc_init(),); /* init & detect fdc */ - TRACE_CATCH(ftape_activate_drive(&ft_drive_type), - fdc_disable(); - fdc_release_irq_and_dma(); - fdc_release_regions()); - TRACE_CATCH(ftape_get_drive_status(), ftape_detach_drive()); - if (ft_drive_type.vendor_id == UNKNOWN_VENDOR) { - ftape_log_vendor_id(); - } - if (ft_new_tape) { - ftape_init_drive_needed = 1; - } - if (!ft_no_tape && ftape_init_drive_needed) { - TRACE_CATCH(ftape_init_drive(), ftape_detach_drive()); - } - ftape_munmap(); /* clear the mmap flag */ - clear_history(); - TRACE_EXIT 0; -} - -/* release routine called by the high level interface modules - * zftape or sftape. - */ -void ftape_disable(void) -{ - int i; - TRACE_FUN(ft_t_any); - - for (i = 0; i < ft_nr_buffers; i++) { - if (ft_buffer[i]->mmapped) { - TRACE(ft_t_noise, "first byte of buffer %d: 0x%02x", - i, *ft_buffer[i]->address); - } - } - if (sigtestsetmask(¤t->pending.signal, _DONT_BLOCK) && - !(sigtestsetmask(¤t->pending.signal, _NEVER_BLOCK)) && - ftape_tape_running) { - TRACE(ft_t_warn, - "Interrupted by fatal signal and tape still running"); - ftape_dumb_stop(); - ftape_abort_operation(); /* it's annoying */ - } else { - ftape_set_state(idle); - } - ftape_detach_drive(); - if (ft_history.used) { - TRACE(ft_t_info, "== Non-fatal errors this run: =="); - TRACE(ft_t_info, "fdc isr statistics:\n" - KERN_INFO " id_am_errors : %3d\n" - KERN_INFO " id_crc_errors : %3d\n" - KERN_INFO " data_am_errors : %3d\n" - KERN_INFO " data_crc_errors : %3d\n" - KERN_INFO " overrun_errors : %3d\n" - KERN_INFO " no_data_errors : %3d\n" - KERN_INFO " retries : %3d", - ft_history.id_am_errors, ft_history.id_crc_errors, - ft_history.data_am_errors, ft_history.data_crc_errors, - ft_history.overrun_errors, ft_history.no_data_errors, - ft_history.retries); - if (ft_history.used & 1) { - TRACE(ft_t_info, "ecc statistics:\n" - KERN_INFO " crc_errors : %3d\n" - KERN_INFO " crc_failures : %3d\n" - KERN_INFO " ecc_failures : %3d\n" - KERN_INFO " sectors corrected: %3d", - ft_history.crc_errors, ft_history.crc_failures, - ft_history.ecc_failures, ft_history.corrected); - } - if (ft_history.defects > 0) { - TRACE(ft_t_warn, "Warning: %d media defects!", - ft_history.defects); - } - if (ft_history.rewinds > 0) { - TRACE(ft_t_info, "tape motion statistics:\n" - KERN_INFO "repositions : %3d", - ft_history.rewinds); - } - } - ft_failure = 1; - TRACE_EXIT; -} - -static void ftape_init_driver(void) -{ - TRACE_FUN(ft_t_flow); - - ft_drive_type.vendor_id = UNKNOWN_VENDOR; - ft_drive_type.speed = 0; - ft_drive_type.wake_up = unknown_wake_up; - ft_drive_type.name = "Unknown"; - - ftape_timeout.seek = 650 * FT_SECOND; - ftape_timeout.reset = 670 * FT_SECOND; - ftape_timeout.rewind = 650 * FT_SECOND; - ftape_timeout.head_seek = 15 * FT_SECOND; - ftape_timeout.stop = 5 * FT_SECOND; - ftape_timeout.pause = 16 * FT_SECOND; - - ft_qic_std = -1; - ftape_tape_len = 0; /* unknown */ - ftape_current_command = 0; - ftape_current_cylinder = -1; - - ft_segments_per_track = 102; - ftape_segments_per_head = 1020; - ftape_segments_per_cylinder = 4; - ft_tracks_per_tape = 20; - - ft_failure = 1; - - ft_formatted = 0; - ft_no_tape = 1; - ft_write_protected = 1; - ft_new_tape = 1; - - ft_driver_state = idle; - - ft_data_rate = - ft_fdc_max_rate = 500; - ft_drive_max_rate = 0; /* triggers set_rate_test() */ - - ftape_init_drive_needed = 1; - - ft_header_segment_1 = -1; - ft_header_segment_2 = -1; - ft_used_header_segment = -1; - ft_first_data_segment = -1; - ft_last_data_segment = -1; - - ft_location.track = -1; - ft_location.known = 0; - - ftape_tape_running = 0; - ftape_might_be_off_track = 1; - - ftape_new_cartridge(); /* init some tape related variables */ - ftape_init_bsm(); - TRACE_EXIT; -} diff --git a/drivers/char/ftape/lowlevel/ftape-ctl.h b/drivers/char/ftape/lowlevel/ftape-ctl.h deleted file mode 100644 index 5f5e30bc361..00000000000 --- a/drivers/char/ftape/lowlevel/ftape-ctl.h +++ /dev/null @@ -1,162 +0,0 @@ -#ifndef _FTAPE_CTL_H -#define _FTAPE_CTL_H - -/* - * Copyright (C) 1993-1996 Bas Laarhoven, - * (C) 1996-1997 Claus-Justus Heine. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; see the file COPYING. If not, write to - the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - - * - * $Source: /homes/cvs/ftape-stacked/ftape/lowlevel/ftape-ctl.h,v $ - * $Revision: 1.2 $ - * $Date: 1997/10/05 19:18:09 $ - * - * This file contains the non-standard IOCTL related definitions - * for the QIC-40/80/3010/3020 floppy-tape driver "ftape" for - * Linux. - */ - -#include <linux/ioctl.h> -#include <linux/mtio.h> -#include <linux/ftape-vendors.h> - -#include "../lowlevel/ftape-rw.h" -#include <linux/ftape-header-segment.h> - -typedef struct { - int used; /* any reading or writing done */ - /* isr statistics */ - unsigned int id_am_errors; /* id address mark not found */ - unsigned int id_crc_errors; /* crc error in id address mark */ - unsigned int data_am_errors; /* data address mark not found */ - unsigned int data_crc_errors; /* crc error in data field */ - unsigned int overrun_errors; /* fdc access timing problem */ - unsigned int no_data_errors; /* sector not found */ - unsigned int retries; /* number of tape retries */ - /* ecc statistics */ - unsigned int crc_errors; /* crc error in data */ - unsigned int crc_failures; /* bad data without crc error */ - unsigned int ecc_failures; /* failed to correct */ - unsigned int corrected; /* total sectors corrected */ - /* general statistics */ - unsigned int rewinds; /* number of tape rewinds */ - unsigned int defects; /* bad sectors due to media defects */ -} history_record; - -/* this structure contains * ALL * information that we want - * our child modules to know about, but don't want them to - * modify. - */ -typedef struct { - /* vendor information */ - vendor_struct fti_drive_type; - /* data rates */ - unsigned int fti_used_data_rate; - unsigned int fti_drive_max_rate; - unsigned int fti_fdc_max_rate; - /* drive selection, either FTAPE_SEL_A/B/C/D */ - int fti_drive_sel; - /* flags set after decode the drive and tape status */ - unsigned int fti_formatted :1; - unsigned int fti_no_tape :1; - unsigned int fti_write_protected:1; - unsigned int fti_new_tape :1; - /* values of last queried drive/tape status and error */ - ft_drive_error fti_last_error; - ft_drive_status fti_last_status; - /* cartridge geometry */ - unsigned int fti_tracks_per_tape; - unsigned int fti_segments_per_track; - /* location of header segments, etc. */ - int fti_used_header_segment; - int fti_header_segment_1; - int fti_header_segment_2; - int fti_first_data_segment; - int fti_last_data_segment; - /* the format code as stored in the header segment */ - ft_format_type fti_format_code; - /* the following is the sole reason for the ftape_set_status() call */ - unsigned int fti_qic_std; - /* is tape running? */ - volatile enum runner_status_enum fti_runner_status; - /* is tape reading/writing/verifying/formatting/deleting */ - buffer_state_enum fti_state; - /* flags fatal hardware error */ - unsigned int fti_failure:1; - /* history record */ - history_record fti_history; -} ftape_info; - -/* vendor information */ -#define ft_drive_type ftape_status.fti_drive_type -/* data rates */ -#define ft_data_rate ftape_status.fti_used_data_rate -#define ft_drive_max_rate ftape_status.fti_drive_max_rate -#define ft_fdc_max_rate ftape_status.fti_fdc_max_rate -/* drive selection, either FTAPE_SEL_A/B/C/D */ -#define ft_drive_sel ftape_status.fti_drive_sel -/* flags set after decode the drive and tape status */ -#define ft_formatted ftape_status.fti_formatted -#define ft_no_tape ftape_status.fti_no_tape -#define ft_write_protected ftape_status.fti_write_protected -#define ft_new_tape ftape_status.fti_new_tape -/* values of last queried drive/tape status and error */ -#define ft_last_error ftape_status.fti_last_error -#define ft_last_status ftape_status.fti_last_status -/* cartridge geometry */ -#define ft_tracks_per_tape ftape_status.fti_tracks_per_tape -#define ft_segments_per_track ftape_status.fti_segments_per_track -/* the format code as stored in the header segment */ -#define ft_format_code ftape_status.fti_format_code -/* the qic status as returned by report drive configuration */ -#define ft_qic_std ftape_status.fti_qic_std -#define ft_used_header_segment ftape_status.fti_used_header_segment -#define ft_header_segment_1 ftape_status.fti_header_segment_1 -#define ft_header_segment_2 ftape_status.fti_header_segment_2 -#define ft_first_data_segment ftape_status.fti_first_data_segment -#define ft_last_data_segment ftape_status.fti_last_data_segment -/* is tape running? */ -#define ft_runner_status ftape_status.fti_runner_status -/* is tape reading/writing/verifying/formatting/deleting */ -#define ft_driver_state ftape_status.fti_state -/* flags fatal hardware error */ -#define ft_failure ftape_status.fti_failure -/* history record */ -#define ft_history ftape_status.fti_history - -/* - * ftape-ctl.c defined global vars. - */ -extern ftape_info ftape_status; -extern int ftape_segments_per_head; -extern int ftape_segments_per_cylinder; -extern int ftape_init_drive_needed; - -/* - * ftape-ctl.c defined global functions. - */ -extern int ftape_mmap(struct vm_area_struct *vma); -extern int ftape_enable(int drive_selection); -extern void ftape_disable(void); -extern int ftape_seek_to_bot(void); -extern int ftape_seek_to_eot(void); -extern int ftape_abort_operation(void); -extern void ftape_calc_timeouts(unsigned int qic_std, - unsigned int data_rate, - unsigned int tape_len); -extern int ftape_calibrate_data_rate(unsigned int qic_std); -extern const ftape_info *ftape_get_status(void); -#endif diff --git a/drivers/char/ftape/lowlevel/ftape-ecc.c b/drivers/char/ftape/lowlevel/ftape-ecc.c deleted file mode 100644 index e5632f674bc..00000000000 --- a/drivers/char/ftape/lowlevel/ftape-ecc.c +++ /dev/null @@ -1,853 +0,0 @@ -/* - * - * Copyright (c) 1993 Ning and David Mosberger. - - This is based on code originally written by Bas Laarhoven (bas@vimec.nl) - and David L. Brown, Jr., and incorporates improvements suggested by - Kai Harrekilde-Petersen. - - This program is free software; you can redistribute it and/or - modify it under the terms of the GNU General Public License as - published by the Free Software Foundation; either version 2, or (at - your option) any later version. - - This program is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; see the file COPYING. If not, write to - the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, - USA. - - * - * $Source: /homes/cvs/ftape-stacked/ftape/lowlevel/ftape-ecc.c,v $ - * $Revision: 1.3 $ - * $Date: 1997/10/05 19:18:10 $ - * - * This file contains the Reed-Solomon error correction code - * for the QIC-40/80 floppy-tape driver for Linux. - */ - -#include <linux/ftape.h> - -#include "../lowlevel/ftape-tracing.h" -#include "../lowlevel/ftape-ecc.h" - -/* Machines that are big-endian should define macro BIG_ENDIAN. - * Unfortunately, there doesn't appear to be a standard include file - * that works for all OSs. - */ - -#if defined(__sparc__) || defined(__hppa) -#define BIG_ENDIAN -#endif /* __sparc__ || __hppa */ - -#if defined(__mips__) -#error Find a smart way to determine the Endianness of the MIPS CPU -#endif - -/* Notice: to minimize the potential for confusion, we use r to - * denote the independent variable of the polynomials in the - * Galois Field GF(2^8). We reserve x for polynomials that - * that have coefficients in GF(2^8). - * - * The Galois Field in which coefficient arithmetic is performed are - * the polynomials over Z_2 (i.e., 0 and 1) modulo the irreducible - * polynomial f(r), where f(r)=r^8 + r^7 + r^2 + r + 1. A polynomial - * is represented as a byte with the MSB as the coefficient of r^7 and - * the LSB as the coefficient of r^0. For example, the binary - * representation of f(x) is 0x187 (of course, this doesn't fit into 8 - * bits). In this field, the polynomial r is a primitive element. - * That is, r^i with i in 0,...,255 enumerates all elements in the - * field. - * - * The generator polynomial for the QIC-80 ECC is - * - * g(x) = x^3 + r^105*x^2 + r^105*x + 1 - * - * which can be factored into: - * - * g(x) = (x-r^-1)(x-r^0)(x-r^1) - * - * the byte representation of the coefficients are: - * - * r^105 = 0xc0 - * r^-1 = 0xc3 - * r^0 = 0x01 - * r^1 = 0x02 - * - * Notice that r^-1 = r^254 as exponent arithmetic is performed - * modulo 2^8-1 = 255. - * - * For more information on Galois Fields and Reed-Solomon codes, refer - * to any good book. I found _An Introduction to Error Correcting - * Codes with Applications_ by S. A. Vanstone and P. C. van Oorschot - * to be a good introduction into the former. _CODING THEORY: The - * Essentials_ I found very useful for its concise description of - * Reed-Solomon encoding/decoding. - * - */ - -typedef __u8 Matrix[3][3]; - -/* - * gfpow[] is defined such that gfpow[i] returns r^i if - * i is in the range [0..255]. - */ -static const __u8 gfpow[] = -{ - 0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80, - 0x87, 0x89, 0x95, 0xad, 0xdd, 0x3d, 0x7a, 0xf4, - 0x6f, 0xde, 0x3b, 0x76, 0xec, 0x5f, 0xbe, 0xfb, - 0x71, 0xe2, 0x43, 0x86, 0x8b, 0x91, 0xa5, 0xcd, - 0x1d, 0x3a, 0x74, 0xe8, 0x57, 0xae, 0xdb, 0x31, - 0x62, 0xc4, 0x0f, 0x1e, 0x3c, 0x78, 0xf0, 0x67, - 0xce, 0x1b, 0x36, 0x6c, 0xd8, 0x37, 0x6e, 0xdc, - 0x3f, 0x7e, 0xfc, 0x7f, 0xfe, 0x7b, 0xf6, 0x6b, - 0xd6, 0x2b, 0x56, 0xac, 0xdf, 0x39, 0x72, 0xe4, - 0x4f, 0x9e, 0xbb, 0xf1, 0x65, 0xca, 0x13, 0x26, - 0x4c, 0x98, 0xb7, 0xe9, 0x55, 0xaa, 0xd3, 0x21, - 0x42, 0x84, 0x8f, 0x99, 0xb5, 0xed, 0x5d, 0xba, - 0xf3, 0x61, 0xc2, 0x03, 0x06, 0x0c, 0x18, 0x30, - 0x60, 0xc0, 0x07, 0x0e, 0x1c, 0x38, 0x70, 0xe0, - 0x47, 0x8e, 0x9b, 0xb1, 0xe5, 0x4d, 0x9a, 0xb3, - 0xe1, 0x45, 0x8a, 0x93, 0xa1, 0xc5, 0x0d, 0x1a, - 0x34, 0x68, 0xd0, 0x27, 0x4e, 0x9c, 0xbf, 0xf9, - 0x75, 0xea, 0x53, 0xa6, 0xcb, 0x11, 0x22, 0x44, - 0x88, 0x97, 0xa9, 0xd5, 0x2d, 0x5a, 0xb4, 0xef, - 0x59, 0xb2, 0xe3, 0x41, 0x82, 0x83, 0x81, 0x85, - 0x8d, 0x9d, 0xbd, 0xfd, 0x7d, 0xfa, 0x73, 0xe6, - 0x4b, 0x96, 0xab, 0xd1, 0x25, 0x4a, 0x94, 0xaf, - 0xd9, 0x35, 0x6a, 0xd4, 0x2f, 0x5e, 0xbc, 0xff, - 0x79, 0xf2, 0x63, 0xc6, 0x0b, 0x16, 0x2c, 0x58, - 0xb0, 0xe7, 0x49, 0x92, 0xa3, 0xc1, 0x05, 0x0a, - 0x14, 0x28, 0x50, 0xa0, 0xc7, 0x09, 0x12, 0x24, - 0x48, 0x90, 0xa7, 0xc9, 0x15, 0x2a, 0x54, 0xa8, - 0xd7, 0x29, 0x52, 0xa4, 0xcf, 0x19, 0x32, 0x64, - 0xc8, 0x17, 0x2e, 0x5c, 0xb8, 0xf7, 0x69, 0xd2, - 0x23, 0x46, 0x8c, 0x9f, 0xb9, 0xf5, 0x6d, 0xda, - 0x33, 0x66, 0xcc, 0x1f, 0x3e, 0x7c, 0xf8, 0x77, - 0xee, 0x5b, 0xb6, 0xeb, 0x51, 0xa2, 0xc3, 0x01 -}; - -/* - * This is a log table. That is, gflog[r^i] returns i (modulo f(r)). - * gflog[0] is undefined and the first element is therefore not valid. - */ -static const __u8 gflog[256] = -{ - 0xff, 0x00, 0x01, 0x63, 0x02, 0xc6, 0x64, 0x6a, - 0x03, 0xcd, 0xc7, 0xbc, 0x65, 0x7e, 0x6b, 0x2a, - 0x04, 0x8d, 0xce, 0x4e, 0xc8, 0xd4, 0xbd, 0xe1, - 0x66, 0xdd, 0x7f, 0x31, 0x6c, 0x20, 0x2b, 0xf3, - 0x05, 0x57, 0x8e, 0xe8, 0xcf, 0xac, 0x4f, 0x83, - 0xc9, 0xd9, 0xd5, 0x41, 0xbe, 0x94, 0xe2, 0xb4, - 0x67, 0x27, 0xde, 0xf0, 0x80, 0xb1, 0x32, 0x35, - 0x6d, 0x45, 0x21, 0x12, 0x2c, 0x0d, 0xf4, 0x38, - 0x06, 0x9b, 0x58, 0x1a, 0x8f, 0x79, 0xe9, 0x70, - 0xd0, 0xc2, 0xad, 0xa8, 0x50, 0x75, 0x84, 0x48, - 0xca, 0xfc, 0xda, 0x8a, 0xd6, 0x54, 0x42, 0x24, - 0xbf, 0x98, 0x95, 0xf9, 0xe3, 0x5e, 0xb5, 0x15, - 0x68, 0x61, 0x28, 0xba, 0xdf, 0x4c, 0xf1, 0x2f, - 0x81, 0xe6, 0xb2, 0x3f, 0x33, 0xee, 0x36, 0x10, - 0x6e, 0x18, 0x46, 0xa6, 0x22, 0x88, 0x13, 0xf7, - 0x2d, 0xb8, 0x0e, 0x3d, 0xf5, 0xa4, 0x39, 0x3b, - 0x07, 0x9e, 0x9c, 0x9d, 0x59, 0x9f, 0x1b, 0x08, - 0x90, 0x09, 0x7a, 0x1c, 0xea, 0xa0, 0x71, 0x5a, - 0xd1, 0x1d, 0xc3, 0x7b, 0xae, 0x0a, 0xa9, 0x91, - 0x51, 0x5b, 0x76, 0x72, 0x85, 0xa1, 0x49, 0xeb, - 0xcb, 0x7c, 0xfd, 0xc4, 0xdb, 0x1e, 0x8b, 0xd2, - 0xd7, 0x92, 0x55, 0xaa, 0x43, 0x0b, 0x25, 0xaf, - 0xc0, 0x73, 0x99, 0x77, 0x96, 0x5c, 0xfa, 0x52, - 0xe4, 0xec, 0x5f, 0x4a, 0xb6, 0xa2, 0x16, 0x86, - 0x69, 0xc5, 0x62, 0xfe, 0x29, 0x7d, 0xbb, 0xcc, - 0xe0, 0xd3, 0x4d, 0x8c, 0xf2, 0x1f, 0x30, 0xdc, - 0x82, 0xab, 0xe7, 0x56, 0xb3, 0x93, 0x40, 0xd8, - 0x34, 0xb0, 0xef, 0x26, 0x37, 0x0c, 0x11, 0x44, - 0x6f, 0x78, 0x19, 0x9a, 0x47, 0x74, 0xa7, 0xc1, - 0x23, 0x53, 0x89, 0xfb, 0x14, 0x5d, 0xf8, 0x97, - 0x2e, 0x4b, 0xb9, 0x60, 0x0f, 0xed, 0x3e, 0xe5, - 0xf6, 0x87, 0xa5, 0x17, 0x3a, 0xa3, 0x3c, 0xb7 -}; - -/* This is a multiplication table for the factor 0xc0 (i.e., r^105 (mod f(r)). - * gfmul_c0[f] returns r^105 * f(r) (modulo f(r)). - */ -static const __u8 gfmul_c0[256] = -{ - 0x00, 0xc0, 0x07, 0xc7, 0x0e, 0xce, 0x09, 0xc9, - 0x1c, 0xdc, 0x1b, 0xdb, 0x12, 0xd2, 0x15, 0xd5, - 0x38, 0xf8, 0x3f, 0xff, 0x36, 0xf6, 0x31, 0xf1, - 0x24, 0xe4, 0x23, 0xe3, 0x2a, 0xea, 0x2d, 0xed, - 0x70, 0xb0, 0x77, 0xb7, 0x7e, 0xbe, 0x79, 0xb9, - 0x6c, 0xac, 0x6b, 0xab, 0x62, 0xa2, 0x65, 0xa5, - 0x48, 0x88, 0x4f, 0x8f, 0x46, 0x86, 0x41, 0x81, - 0x54, 0x94, 0x53, 0x93, 0x5a, 0x9a, 0x5d, 0x9d, - 0xe0, 0x20, 0xe7, 0x27, 0xee, 0x2e, 0xe9, 0x29, - 0xfc, 0x3c, 0xfb, 0x3b, 0xf2, 0x32, 0xf5, 0x35, - 0xd8, 0x18, 0xdf, 0x1f, 0xd6, 0x16, 0xd1, 0x11, - 0xc4, 0x04, 0xc3, 0x03, 0xca, 0x0a, 0xcd, 0x0d, - 0x90, 0x50, 0x97, 0x57, 0x9e, 0x5e, 0x99, 0x59, - 0x8c, 0x4c, 0x8b, 0x4b, 0x82, 0x42, 0x85, 0x45, - 0xa8, 0x68, 0xaf, 0x6f, 0xa6, 0x66, 0xa1, 0x61, - 0xb4, 0x74, 0xb3, 0x73, 0xba, 0x7a, 0xbd, 0x7d, - 0x47, 0x87, 0x40, 0x80, 0x49, 0x89, 0x4e, 0x8e, - 0x5b, 0x9b, 0x5c, 0x9c, 0x55, 0x95, 0x52, 0x92, - 0x7f, 0xbf, 0x78, 0xb8, 0x71, 0xb1, 0x76, 0xb6, - 0x63, 0xa3, 0x64, 0xa4, 0x6d, 0xad, 0x6a, 0xaa, - 0x37, 0xf7, 0x30, 0xf0, 0x39, 0xf9, 0x3e, 0xfe, - 0x2b, 0xeb, 0x2c, 0xec, 0x25, 0xe5, 0x22, 0xe2, - 0x0f, 0xcf, 0x08, 0xc8, 0x01, 0xc1, 0x06, 0xc6, - 0x13, 0xd3, 0x14, 0xd4, 0x1d, 0xdd, 0x1a, 0xda, - 0xa7, 0x67, 0xa0, 0x60, 0xa9, 0x69, 0xae, 0x6e, - 0xbb, 0x7b, 0xbc, 0x7c, 0xb5, 0x75, 0xb2, 0x72, - 0x9f, 0x5f, 0x98, 0x58, 0x91, 0x51, 0x96, 0x56, - 0x83, 0x43, 0x84, 0x44, 0x8d, 0x4d, 0x8a, 0x4a, - 0xd7, 0x17, 0xd0, 0x10, 0xd9, 0x19, 0xde, 0x1e, - 0xcb, 0x0b, 0xcc, 0x0c, 0xc5, 0x05, 0xc2, 0x02, - 0xef, 0x2f, 0xe8, 0x28, 0xe1, 0x21, 0xe6, 0x26, - 0xf3, 0x33, 0xf4, 0x34, 0xfd, 0x3d, 0xfa, 0x3a -}; - - -/* Returns V modulo 255 provided V is in the range -255,-254,...,509. - */ -static inline __u8 mod255(int v) -{ - if (v > 0) { - if (v < 255) { - return v; - } else { - return v - 255; - } - } else { - return v + 255; - } -} - - -/* Add two numbers in the field. Addition in this field is equivalent - * to a bit-wise exclusive OR operation---subtraction is therefore - * identical to addition. - */ -static inline __u8 gfadd(__u8 a, __u8 b) -{ - return a ^ b; -} - - -/* Add two vectors of numbers in the field. Each byte in A and B gets - * added individually. - */ -static inline unsigned long gfadd_long(unsigned long a, unsigned long b) -{ - return a ^ b; -} - - -/* Multiply two numbers in the field: - */ -static inline __u8 gfmul(__u8 a, __u8 b) -{ - if (a && b) { - return gfpow[mod255(gflog[a] + gflog[b])]; - } else { - return 0; - } -} - - -/* Just like gfmul, except we have already looked up the log of the - * second number. - */ -static inline __u8 gfmul_exp(__u8 a, int b) -{ - if (a) { - return gfpow[mod255(gflog[a] + b)]; - } else { - return 0; - } -} - - -/* Just like gfmul_exp, except that A is a vector of numbers. That - * is, each byte in A gets multiplied by gfpow[mod255(B)]. - */ -static inline unsigned long gfmul_exp_long(unsigned long a, int b) -{ - __u8 t; - - if (sizeof(long) == 4) { - return ( - ((t = (__u32)a >> 24 & 0xff) ? - (((__u32) gfpow[mod255(gflog[t] + b)]) << 24) : 0) | - ((t = (__u32)a >> 16 & 0xff) ? - (((__u32) gfpow[mod255(gflog[t] + b)]) << 16) : 0) | - ((t = (__u32)a >> 8 & 0xff) ? - (((__u32) gfpow[mod255(gflog[t] + b)]) << 8) : 0) | - ((t = (__u32)a >> 0 & 0xff) ? - (((__u32) gfpow[mod255(gflog[t] + b)]) << 0) : 0)); - } else if (sizeof(long) == 8) { - return ( - ((t = (__u64)a >> 56 & 0xff) ? - (((__u64) gfpow[mod255(gflog[t] + b)]) << 56) : 0) | - ((t = (__u64)a >> 48 & 0xff) ? - (((__u64) gfpow[mod255(gflog[t] + b)]) << 48) : 0) | - ((t = (__u64)a >> 40 & 0xff) ? - (((__u64) gfpow[mod255(gflog[t] + b)]) << 40) : 0) | - ((t = (__u64)a >> 32 & 0xff) ? - (((__u64) gfpow[mod255(gflog[t] + b)]) << 32) : 0) | - ((t = (__u64)a >> 24 & 0xff) ? - (((__u64) gfpow[mod255(gflog[t] + b)]) << 24) : 0) | - ((t = (__u64)a >> 16 & 0xff) ? - (((__u64) gfpow[mod255(gflog[t] + b)]) << 16) : 0) | - ((t = (__u64)a >> 8 & 0xff) ? - (((__u64) gfpow[mod255(gflog[t] + b)]) << 8) : 0) | - ((t = (__u64)a >> 0 & 0xff) ? - (((__u64) gfpow[mod255(gflog[t] + b)]) << 0) : 0)); - } else { - TRACE_FUN(ft_t_any); - TRACE_ABORT(-1, ft_t_err, "Error: size of long is %d bytes", - (int)sizeof(long)); - } -} - - -/* Divide two numbers in the field. Returns a/b (modulo f(x)). - */ -static inline __u8 gfdiv(__u8 a, __u8 b) -{ - if (!b) { - TRACE_FUN(ft_t_any); - TRACE_ABORT(0xff, ft_t_bug, "Error: division by zero"); - } else if (a == 0) { - return 0; - } else { - return gfpow[mod255(gflog[a] - gflog[b])]; - } -} - - -/* The following functions return the inverse of the matrix of the - * linear system that needs to be solved to determine the error - * magnitudes. The first deals with matrices of rank 3, while the - * second deals with matrices of rank 2. The error indices are passed - * in arguments L0,..,L2 (0=first sector, 31=last sector). The error - * indices must be sorted in ascending order, i.e., L0<L1<L2. - * - * The linear system that needs to be solved for the error magnitudes - * is A * b = s, where s is the known vector of syndromes, b is the - * vector of error magnitudes and A in the ORDER=3 case: - * - * A_3 = {{1/r^L[0], 1/r^L[1], 1/r^L[2]}, - * { 1, 1, 1}, - * { r^L[0], r^L[1], r^L[2]}} - */ -static inline int gfinv3(__u8 l0, - __u8 l1, - __u8 l2, - Matrix Ainv) -{ - __u8 det; - __u8 t20, t10, t21, t12, t01, t02; - int log_det; - - /* compute some intermediate results: */ - t20 = gfpow[l2 - l0]; /* t20 = r^l2/r^l0 */ - t10 = gfpow[l1 - l0]; /* t10 = r^l1/r^l0 */ - t21 = gfpow[l2 - l1]; /* t21 = r^l2/r^l1 */ - t12 = gfpow[l1 - l2 + 255]; /* t12 = r^l1/r^l2 */ - t01 = gfpow[l0 - l1 + 255]; /* t01 = r^l0/r^l1 */ - t02 = gfpow[l0 - l2 + 255]; /* t02 = r^l0/r^l2 */ - /* Calculate the determinant of matrix A_3^-1 (sometimes - * called the Vandermonde determinant): - */ - det = gfadd(t20, gfadd(t10, gfadd(t21, gfadd(t12, gfadd(t01, t02))))); - if (!det) { - TRACE_FUN(ft_t_any); - TRACE_ABORT(0, ft_t_err, - "Inversion failed (3 CRC errors, >0 CRC failures)"); - } - log_det = 255 - gflog[det]; - - /* Now, calculate all of the coefficients: - */ - Ainv[0][0]= gfmul_exp(gfadd(gfpow[l1], gfpow[l2]), log_det); - Ainv[0][1]= gfmul_exp(gfadd(t21, t12), log_det); - Ainv[0][2]= gfmul_exp(gfadd(gfpow[255 - l1], gfpow[255 - l2]),log_det); - - Ainv[1][0]= gfmul_exp(gfadd(gfpow[l0], gfpow[l2]), log_det); - Ainv[1][1]= gfmul_exp(gfadd(t20, t02), log_det); - Ainv[1][2]= gfmul_exp(gfadd(gfpow[255 - l0], gfpow[255 - l2]),log_det); - - Ainv[2][0]= gfmul_exp(gfadd(gfpow[l0], gfpow[l1]), log_det); - Ainv[2][1]= gfmul_exp(gfadd(t10, t01), log_det); - Ainv[2][2]= gfmul_exp(gfadd(gfpow[255 - l0], gfpow[255 - l1]),log_det); - - return 1; -} - - -static inline int gfinv2(__u8 l0, __u8 l1, Matrix Ainv) -{ - __u8 det; - __u8 t1, t2; - int log_det; - - t1 = gfpow[255 - l0]; - t2 = gfpow[255 - l1]; - det = gfadd(t1, t2); - if (!det) { - TRACE_FUN(ft_t_any); - TRACE_ABORT(0, ft_t_err, - "Inversion failed (2 CRC errors, >0 CRC failures)"); - } - log_det = 255 - gflog[det]; - - /* Now, calculate all of the coefficients: - */ - Ainv[0][0] = Ainv[1][0] = gfpow[log_det]; - - Ainv[0][1] = gfmul_exp(t2, log_det); - Ainv[1][1] = gfmul_exp(t1, log_det); - - return 1; -} - - -/* Multiply matrix A by vector S and return result in vector B. M is - * assumed to be of order NxN, S and B of order Nx1. - */ -static inline void gfmat_mul(int n, Matrix A, - __u8 *s, __u8 *b) -{ - int i, j; - __u8 dot_prod; - - for (i = 0; i < n; ++i) { - dot_prod = 0; - for (j = 0; j < n; ++j) { - dot_prod = gfadd(dot_prod, gfmul(A[i][j], s[j])); - } - b[i] = dot_prod; - } -} - - - -/* The Reed Solomon ECC codes are computed over the N-th byte of each - * block, where N=SECTOR_SIZE. There are up to 29 blocks of data, and - * 3 blocks of ECC. The blocks are stored contiguously in memory. A - * segment, consequently, is assumed to have at least 4 blocks: one or - * more data blocks plus three ECC blocks. - * - * Notice: In QIC-80 speak, a CRC error is a sector with an incorrect - * CRC. A CRC failure is a sector with incorrect data, but - * a valid CRC. In the error control literature, the former - * is usually called "erasure", the latter "error." - */ -/* Compute the parity bytes for C columns of data, where C is the - * number of bytes that fit into a long integer. We use a linear - * feed-back register to do this. The parity bytes P[0], P[STRIDE], - * P[2*STRIDE] are computed such that: - * - * x^k * p(x) + m(x) = 0 (modulo g(x)) - * - * where k = NBLOCKS, - * p(x) = P[0] + P[STRIDE]*x + P[2*STRIDE]*x^2, and - * m(x) = sum_{i=0}^k m_i*x^i. - * m_i = DATA[i*SECTOR_SIZE] - */ -static inline void set_parity(unsigned long *data, - int nblocks, - unsigned long *p, - int stride) -{ - unsigned long p0, p1, p2, t1, t2, *end; - - end = data + nblocks * (FT_SECTOR_SIZE / sizeof(long)); - p0 = p1 = p2 = 0; - while (data < end) { - /* The new parity bytes p0_i, p1_i, p2_i are computed - * from the old values p0_{i-1}, p1_{i-1}, p2_{i-1} - * recursively as: - * - * p0_i = p1_{i-1} + r^105 * (m_{i-1} - p0_{i-1}) - * p1_i = p2_{i-1} + r^105 * (m_{i-1} - p0_{i-1}) - * p2_i = (m_{i-1} - p0_{i-1}) - * - * With the initial condition: p0_0 = p1_0 = p2_0 = 0. - */ - t1 = gfadd_long(*data, p0); - /* - * Multiply each byte in t1 by 0xc0: - */ - if (sizeof(long) == 4) { - t2= (((__u32) gfmul_c0[(__u32)t1 >> 24 & 0xff]) << 24 | - ((__u32) gfmul_c0[(__u32)t1 >> 16 & 0xff]) << 16 | - ((__u32) gfmul_c0[(__u32)t1 >> 8 & 0xff]) << 8 | - ((__u32) gfmul_c0[(__u32)t1 >> 0 & 0xff]) << 0); - } else if (sizeof(long) == 8) { - t2= (((__u64) gfmul_c0[(__u64)t1 >> 56 & 0xff]) << 56 | - ((__u64) gfmul_c0[(__u64)t1 >> 48 & 0xff]) << 48 | - ((__u64) gfmul_c0[(__u64)t1 >> 40 & 0xff]) << 40 | - ((__u64) gfmul_c0[(__u64)t1 >> 32 & 0xff]) << 32 | - ((__u64) gfmul_c0[(__u64)t1 >> 24 & 0xff]) << 24 | - ((__u64) gfmul_c0[(__u64)t1 >> 16 & 0xff]) << 16 | - ((__u64) gfmul_c0[(__u64)t1 >> 8 & 0xff]) << 8 | - ((__u64) gfmul_c0[(__u64)t1 >> 0 & 0xff]) << 0); - } else { - TRACE_FUN(ft_t_any); - TRACE(ft_t_err, "Error: long is of size %d", - (int) sizeof(long)); - TRACE_EXIT; - } - p0 = gfadd_long(t2, p1); - p1 = gfadd_long(t2, p2); - p2 = t1; - data += FT_SECTOR_SIZE / sizeof(long); - } - *p = p0; - p += stride; - *p = p1; - p += stride; - *p = p2; - return; -} - - -/* Compute the 3 syndrome values. DATA should point to the first byte - * of the column for which the syndromes are desired. The syndromes - * are computed over the first NBLOCKS of rows. The three bytes will - * be placed in S[0], S[1], and S[2]. - * - * S[i] is the value of the "message" polynomial m(x) evaluated at the - * i-th root of the generator polynomial g(x). - * - * As g(x)=(x-r^-1)(x-1)(x-r^1) we evaluate the message polynomial at - * x=r^-1 to get S[0], at x=r^0=1 to get S[1], and at x=r to get S[2]. - * This could be done directly and efficiently via the Horner scheme. - * However, it would require multiplication tables for the factors - * r^-1 (0xc3) and r (0x02). The following scheme does not require - * any multiplication tables beyond what's needed for set_parity() - * anyway and is slightly faster if there are no errors and slightly - * slower if there are errors. The latter is hopefully the infrequent - * case. - * - * To understand the alternative algorithm, notice that set_parity(m, - * k, p) computes parity bytes such that: - * - * x^k * p(x) = m(x) (modulo g(x)). - * - * That is, to evaluate m(r^m), where r^m is a root of g(x), we can - * simply evaluate (r^m)^k*p(r^m). Also, notice that p is 0 if and - * only if s is zero. That is, if all parity bytes are 0, we know - * there is no error in the data and consequently there is no need to - * compute s(x) at all! In all other cases, we compute s(x) from p(x) - * by evaluating (r^m)^k*p(r^m) for m=-1, m=0, and m=1. The p(x) - * polynomial is evaluated via the Horner scheme. - */ -static int compute_syndromes(unsigned long *data, int nblocks, unsigned long *s) -{ - unsigned long p[3]; - - set_parity(data, nblocks, p, 1); - if (p[0] | p[1] | p[2]) { - /* Some of the checked columns do not have a zero - * syndrome. For simplicity, we compute the syndromes - * for all columns that we have computed the - * remainders for. - */ - s[0] = gfmul_exp_long( - gfadd_long(p[0], - gfmul_exp_long( - gfadd_long(p[1], - gfmul_exp_long(p[2], -1)), - -1)), - -nblocks); - s[1] = gfadd_long(gfadd_long(p[2], p[1]), p[0]); - s[2] = gfmul_exp_long( - gfadd_long(p[0], - gfmul_exp_long( - gfadd_long(p[1], - gfmul_exp_long(p[2], 1)), - 1)), - nblocks); - return 0; - } else { - return 1; - } -} - - -/* Correct the block in the column pointed to by DATA. There are NBAD - * CRC errors and their indices are in BAD_LOC[0], up to - * BAD_LOC[NBAD-1]. If NBAD>1, Ainv holds the inverse of the matrix - * of the linear system that needs to be solved to determine the error - * magnitudes. S[0], S[1], and S[2] are the syndrome values. If row - * j gets corrected, then bit j will be set in CORRECTION_MAP. - */ -static inline int correct_block(__u8 *data, int nblocks, - int nbad, int *bad_loc, Matrix Ainv, - __u8 *s, - SectorMap * correction_map) -{ - int ncorrected = 0; - int i; - __u8 t1, t2; - __u8 c0, c1, c2; /* check bytes */ - __u8 error_mag[3], log_error_mag; - __u8 *dp, l, e; - TRACE_FUN(ft_t_any); - - switch (nbad) { - case 0: - /* might have a CRC failure: */ - if (s[0] == 0) { - /* more than one error */ - TRACE_ABORT(-1, ft_t_err, - "ECC failed (0 CRC errors, >1 CRC failures)"); - } - t1 = gfdiv(s[1], s[0]); - if ((bad_loc[nbad++] = gflog[t1]) >= nblocks) { - TRACE(ft_t_err, - "ECC failed (0 CRC errors, >1 CRC failures)"); - TRACE_ABORT(-1, ft_t_err, - "attempt to correct data at %d", bad_loc[0]); - } - error_mag[0] = s[1]; - break; - case 1: - t1 = gfadd(gfmul_exp(s[1], bad_loc[0]), s[2]); - t2 = gfadd(gfmul_exp(s[0], bad_loc[0]), s[1]); - if (t1 == 0 && t2 == 0) { - /* one erasure, no error: */ - Ainv[0][0] = gfpow[bad_loc[0]]; - } else if (t1 == 0 || t2 == 0) { - /* one erasure and more than one error: */ - TRACE_ABORT(-1, ft_t_err, - "ECC failed (1 erasure, >1 error)"); - } else { - /* one erasure, one error: */ - if ((bad_loc[nbad++] = gflog[gfdiv(t1, t2)]) - >= nblocks) { - TRACE(ft_t_err, "ECC failed " - "(1 CRC errors, >1 CRC failures)"); - TRACE_ABORT(-1, ft_t_err, - "attempt to correct data at %d", - bad_loc[1]); - } - if (!gfinv2(bad_loc[0], bad_loc[1], Ainv)) { - /* inversion failed---must have more - * than one error - */ - TRACE_EXIT -1; - } - } - /* FALL THROUGH TO ERROR MAGNITUDE COMPUTATION: - */ - case 2: - case 3: - /* compute error magnitudes: */ - gfmat_mul(nbad, Ainv, s, error_mag); - break; - - default: - TRACE_ABORT(-1, ft_t_err, - "Internal Error: number of CRC errors > 3"); - } - - /* Perform correction by adding ERROR_MAG[i] to the byte at - * offset BAD_LOC[i]. Also add the value of the computed - * error polynomial to the syndrome values. If the correction - * was successful, the resulting check bytes should be zero - * (i.e., the corrected data is a valid code word). - */ - c0 = s[0]; - c1 = s[1]; - c2 = s[2]; - for (i = 0; i < nbad; ++i) { - e = error_mag[i]; - if (e) { - /* correct the byte at offset L by magnitude E: */ - l = bad_loc[i]; - dp = &data[l * FT_SECTOR_SIZE]; - *dp = gfadd(*dp, e); - *correction_map |= 1 << l; - ++ncorrected; - - log_error_mag = gflog[e]; - c0 = gfadd(c0, gfpow[mod255(log_error_mag - l)]); - c1 = gfadd(c1, e); - c2 = gfadd(c2, gfpow[mod255(log_error_mag + l)]); - } - } - if (c0 || c1 || c2) { - TRACE_ABORT(-1, ft_t_err, - "ECC self-check failed, too many errors"); - } - TRACE_EXIT ncorrected; -} - - -#if defined(ECC_SANITY_CHECK) || defined(ECC_PARANOID) - -/* Perform a sanity check on the computed parity bytes: - */ -static int sanity_check(unsigned long *data, int nblocks) -{ - TRACE_FUN(ft_t_any); - unsigned long s[3]; - - if (!compute_syndromes(data, nblocks, s)) { - TRACE_ABORT(0, ft_bug, - "Internal Error: syndrome self-check failed"); - } - TRACE_EXIT 1; -} - -#endif /* defined(ECC_SANITY_CHECK) || defined(ECC_PARANOID) */ - -/* Compute the parity for an entire segment of data. - */ -int ftape_ecc_set_segment_parity(struct memory_segment *mseg) -{ - int i; - __u8 *parity_bytes; - - parity_bytes = &mseg->data[(mseg->blocks - 3) * FT_SECTOR_SIZE]; - for (i = 0; i < FT_SECTOR_SIZE; i += sizeof(long)) { - set_parity((unsigned long *) &mseg->data[i], mseg->blocks - 3, - (unsigned long *) &parity_bytes[i], - FT_SECTOR_SIZE / sizeof(long)); -#ifdef ECC_PARANOID - if (!sanity_check((unsigned long *) &mseg->data[i], - mseg->blocks)) { - return -1; - } -#endif /* ECC_PARANOID */ - } - return 0; -} - - -/* Checks and corrects (if possible) the segment MSEG. Returns one of - * ECC_OK, ECC_CORRECTED, and ECC_FAILED. - */ -int ftape_ecc_correct_data(struct memory_segment *mseg) -{ - int col, i, result; - int ncorrected = 0; - int nerasures = 0; /* # of erasures (CRC errors) */ - int erasure_loc[3]; /* erasure locations */ - unsigned long ss[3]; - __u8 s[3]; - Matrix Ainv; - TRACE_FUN(ft_t_flow); - - mseg->corrected = 0; - - /* find first column that has non-zero syndromes: */ - for (col = 0; col < FT_SECTOR_SIZE; col += sizeof(long)) { - if (!compute_syndromes((unsigned long *) &mseg->data[col], - mseg->blocks, ss)) { - /* something is wrong---have to fix things */ - break; - } - } - if (col >= FT_SECTOR_SIZE) { - /* all syndromes are ok, therefore nothing to correct */ - TRACE_EXIT ECC_OK; - } - /* count the number of CRC errors if there were any: */ - if (mseg->read_bad) { - for (i = 0; i < mseg->blocks; i++) { - if (BAD_CHECK(mseg->read_bad, i)) { - if (nerasures >= 3) { - /* this is too much for ECC */ - TRACE_ABORT(ECC_FAILED, ft_t_err, - "ECC failed (>3 CRC errors)"); - } /* if */ - erasure_loc[nerasures++] = i; - } - } - } - /* - * If there are at least 2 CRC errors, determine inverse of matrix - * of linear system to be solved: - */ - switch (nerasures) { - case 2: - if (!gfinv2(erasure_loc[0], erasure_loc[1], Ainv)) { - TRACE_EXIT ECC_FAILED; - } - break; - case 3: - if (!gfinv3(erasure_loc[0], erasure_loc[1], - erasure_loc[2], Ainv)) { - TRACE_EXIT ECC_FAILED; - } - break; - default: - /* this is not an error condition... */ - break; - } - - do { - for (i = 0; i < sizeof(long); ++i) { - s[0] = ss[0]; - s[1] = ss[1]; - s[2] = ss[2]; - if (s[0] | s[1] | s[2]) { -#ifdef BIG_ENDIAN - result = correct_block( - &mseg->data[col + sizeof(long) - 1 - i], - mseg->blocks, - nerasures, - erasure_loc, - Ainv, - s, - &mseg->corrected); -#else - result = correct_block(&mseg->data[col + i], - mseg->blocks, - nerasures, - erasure_loc, - Ainv, - s, - &mseg->corrected); -#endif - if (result < 0) { - TRACE_EXIT ECC_FAILED; - } - ncorrected += result; - } - ss[0] >>= 8; - ss[1] >>= 8; - ss[2] >>= 8; - } - -#ifdef ECC_SANITY_CHECK - if (!sanity_check((unsigned long *) &mseg->data[col], - mseg->blocks)) { - TRACE_EXIT ECC_FAILED; - } -#endif /* ECC_SANITY_CHECK */ - - /* find next column with non-zero syndromes: */ - while ((col += sizeof(long)) < FT_SECTOR_SIZE) { - if (!compute_syndromes((unsigned long *) - &mseg->data[col], mseg->blocks, ss)) { - /* something is wrong---have to fix things */ - break; - } - } - } while (col < FT_SECTOR_SIZE); - if (ncorrected && nerasures == 0) { - TRACE(ft_t_warn, "block contained error not caught by CRC"); - } - TRACE((ncorrected > 0) ? ft_t_noise : ft_t_any, "number of corrections: %d", ncorrected); - TRACE_EXIT ncorrected ? ECC_CORRECTED : ECC_OK; -} diff --git a/drivers/char/ftape/lowlevel/ftape-ecc.h b/drivers/char/ftape/lowlevel/ftape-ecc.h deleted file mode 100644 index 4829146fe9a..00000000000 --- a/drivers/char/ftape/lowlevel/ftape-ecc.h +++ /dev/null @@ -1,84 +0,0 @@ -#ifndef _FTAPE_ECC_H_ -#define _FTAPE_ECC_H_ - -/* - * Copyright (C) 1993 Ning and David Mosberger. - * Original: - * Copyright (C) 1993 Bas Laarhoven. - * Copyright (C) 1992 David L. Brown, Jr. - - This program is free software; you can redistribute it and/or - modify it under the terms of the GNU General Public License as - published by the Free Software Foundation; either version 2, or (at - your option) any later version. - - This program is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; see the file COPYING. If not, write to - the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, - USA. - - * - * $Source: /homes/cvs/ftape-stacked/ftape/lowlevel/ftape-ecc.h,v $ - * $Revision: 1.2 $ - * $Date: 1997/10/05 19:18:11 $ - * - * This file contains the definitions for the - * Reed-Solomon error correction code - * for the QIC-40/80 tape streamer device driver. - */ - -#include "../lowlevel/ftape-bsm.h" - -#define BAD_CLEAR(entry) ((entry)=0) -#define BAD_SET(entry,sector) ((entry)|=(1<<(sector))) -#define BAD_CHECK(entry,sector) ((entry)&(1<<(sector))) - -/* - * Return values for ecc_correct_data: - */ -enum { - ECC_OK, /* Data was correct. */ - ECC_CORRECTED, /* Correctable error in data. */ - ECC_FAILED, /* Could not correct data. */ -}; - -/* - * Representation of an in memory segment. MARKED_BAD lists the - * sectors that were marked bad during formatting. If the N-th sector - * in a segment is marked bad, bit 1<<N will be set in MARKED_BAD. - * The sectors should be read in from the disk and packed, as if the - * bad sectors were not there, and the segment just contained fewer - * sectors. READ_SECTORS is a bitmap of errors encountered while - * reading the data. These offsets are relative to the packed data. - * BLOCKS is a count of the sectors not marked bad. This is just to - * prevent having to count the zero bits in MARKED_BAD each time this - * is needed. DATA is the actual sector packed data from (or to) the - * tape. - */ - struct memory_segment { - SectorMap marked_bad; - SectorMap read_bad; - int blocks; - __u8 *data; - SectorMap corrected; - }; - -/* - * ecc.c defined global variables: - */ -#ifdef TEST -extern int ftape_ecc_tracing; -#endif - -/* - * ecc.c defined global functions: - */ -extern int ftape_ecc_correct_data(struct memory_segment *data); -extern int ftape_ecc_set_segment_parity(struct memory_segment *data); - -#endif /* _FTAPE_ECC_H_ */ diff --git a/drivers/char/ftape/lowlevel/ftape-format.c b/drivers/char/ftape/lowlevel/ftape-format.c deleted file mode 100644 index 5dd4c59a3f3..00000000000 --- a/drivers/char/ftape/lowlevel/ftape-format.c +++ /dev/null @@ -1,344 +0,0 @@ -/* - * Copyright (C) 1997 Claus-Justus Heine. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; see the file COPYING. If not, write to - the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - - * - * $Source: /homes/cvs/ftape-stacked/ftape/lowlevel/ftape-format.c,v $ - * $Revision: 1.2.4.1 $ - * $Date: 1997/11/14 16:05:39 $ - * - * This file contains the code to support formatting of floppy - * tape cartridges with the QIC-40/80/3010/3020 floppy-tape - * driver "ftape" for Linux. - */ - -#include <linux/string.h> -#include <linux/errno.h> - -#include <linux/ftape.h> -#include <linux/qic117.h> -#include "../lowlevel/ftape-tracing.h" -#include "../lowlevel/ftape-io.h" -#include "../lowlevel/ftape-ctl.h" -#include "../lowlevel/ftape-rw.h" -#include "../lowlevel/ftape-ecc.h" -#include "../lowlevel/ftape-bsm.h" -#include "../lowlevel/ftape-format.h" - -#if defined(TESTING) -#define FT_FMT_SEGS_PER_BUF 50 -#else -#define FT_FMT_SEGS_PER_BUF (FT_BUFF_SIZE/(4*FT_SECTORS_PER_SEGMENT)) -#endif - -static spinlock_t ftape_format_lock; - -/* - * first segment of the new buffer - */ -static int switch_segment; - -/* - * at most 256 segments fit into one 32 kb buffer. Even TR-1 cartridges have - * more than this many segments per track, so better be careful. - * - * buffer_struct *buff: buffer to store the formatting coordinates in - * int start: starting segment for this buffer. - * int spt: segments per track - * - * Note: segment ids are relative to the start of the track here. - */ -static void setup_format_buffer(buffer_struct *buff, int start, int spt, - __u8 gap3) -{ - int to_do = spt - start; - TRACE_FUN(ft_t_flow); - - if (to_do > FT_FMT_SEGS_PER_BUF) { - to_do = FT_FMT_SEGS_PER_BUF; - } - buff->ptr = buff->address; - buff->remaining = to_do * FT_SECTORS_PER_SEGMENT; /* # sectors */ - buff->bytes = buff->remaining * 4; /* need 4 bytes per sector */ - buff->gap3 = gap3; - buff->segment_id = start; - buff->next_segment = start + to_do; - if (buff->next_segment >= spt) { - buff->next_segment = 0; /* 0 means: stop runner */ - } - buff->status = waiting; /* tells the isr that it can use - * this buffer - */ - TRACE_EXIT; -} - - -/* - * start formatting a new track. - */ -int ftape_format_track(const unsigned int track, const __u8 gap3) -{ - unsigned long flags; - buffer_struct *tail, *head; - int status; - TRACE_FUN(ft_t_flow); - - TRACE_CATCH(ftape_ready_wait(ftape_timeout.pause, &status),); - if (track & 1) { - if (!(status & QIC_STATUS_AT_EOT)) { - TRACE_CATCH(ftape_seek_to_eot(),); - } - } else { - if (!(status & QIC_STATUS_AT_BOT)) { - TRACE_CATCH(ftape_seek_to_bot(),); - } - } - ftape_abort_operation(); /* this sets ft_head = ft_tail = 0 */ - ftape_set_state(formatting); - - TRACE(ft_t_noise, - "Formatting track %d, logical: from segment %d to %d", - track, track * ft_segments_per_track, - (track + 1) * ft_segments_per_track - 1); - - /* - * initialize the buffer switching protocol for this track - */ - head = ftape_get_buffer(ft_queue_head); /* tape isn't running yet */ - tail = ftape_get_buffer(ft_queue_tail); /* tape isn't running yet */ - switch_segment = 0; - do { - FT_SIGNAL_EXIT(_DONT_BLOCK); - setup_format_buffer(tail, switch_segment, - ft_segments_per_track, gap3); - switch_segment = tail->next_segment; - } while ((switch_segment != 0) && - ((tail = ftape_next_buffer(ft_queue_tail)) != head)); - /* go */ - head->status = formatting; - TRACE_CATCH(ftape_seek_head_to_track(track),); - TRACE_CATCH(ftape_command(QIC_LOGICAL_FORWARD),); - spin_lock_irqsave(&ftape_format_lock, flags); - TRACE_CATCH(fdc_setup_formatting(head), restore_flags(flags)); - spin_unlock_irqrestore(&ftape_format_lock, flags); - TRACE_EXIT 0; -} - -/* return segment id of segment currently being formatted and do the - * buffer switching stuff. - */ -int ftape_format_status(unsigned int *segment_id) -{ - buffer_struct *tail = ftape_get_buffer(ft_queue_tail); - int result; - TRACE_FUN(ft_t_flow); - - while (switch_segment != 0 && - ftape_get_buffer(ft_queue_head) != tail) { - FT_SIGNAL_EXIT(_DONT_BLOCK); - /* need more buffers, first wait for empty buffer - */ - TRACE_CATCH(ftape_wait_segment(formatting),); - /* don't worry for gap3. If we ever hit this piece of code, - * then all buffer already have the correct gap3 set! - */ - setup_format_buffer(tail, switch_segment, - ft_segments_per_track, tail->gap3); - switch_segment = tail->next_segment; - if (switch_segment != 0) { - tail = ftape_next_buffer(ft_queue_tail); - } - } - /* should runner stop ? - */ - if (ft_runner_status == aborting || ft_runner_status == do_abort) { - buffer_struct *head = ftape_get_buffer(ft_queue_head); - TRACE(ft_t_warn, "Error formatting segment %d", - ftape_get_buffer(ft_queue_head)->segment_id); - (void)ftape_abort_operation(); - TRACE_EXIT (head->status != error) ? -EAGAIN : -EIO; - } - /* - * don't care if the timer expires, this is just kind of a - * "select" operation that lets the calling process sleep - * until something has happened - */ - if (fdc_interrupt_wait(5 * FT_SECOND) < 0) { - TRACE(ft_t_noise, "End of track %d at segment %d", - ft_location.track, - ftape_get_buffer(ft_queue_head)->segment_id); - result = 1; /* end of track, unlock module */ - } else { - result = 0; - } - /* - * the calling process should use the seg id to determine - * which parts of the dma buffers can be safely overwritten - * with new data. - */ - *segment_id = ftape_get_buffer(ft_queue_head)->segment_id; - /* - * Internally we start counting segment ids from the start of - * each track when formatting, but externally we keep them - * relative to the start of the tape: - */ - *segment_id += ft_location.track * ft_segments_per_track; - TRACE_EXIT result; -} - -/* - * The segment id is relative to the start of the tape - */ -int ftape_verify_segment(const unsigned int segment_id, SectorMap *bsm) -{ - int result; - int verify_done = 0; - TRACE_FUN(ft_t_flow); - - TRACE(ft_t_noise, "Verifying segment %d", segment_id); - - if (ft_driver_state != verifying) { - TRACE(ft_t_noise, "calling ftape_abort_operation"); - if (ftape_abort_operation() < 0) { - TRACE(ft_t_err, "ftape_abort_operation failed"); - TRACE_EXIT -EIO; - } - } - *bsm = 0x00000000; - ftape_set_state(verifying); - for (;;) { - buffer_struct *tail; - /* - * Allow escape from this loop on signal - */ - FT_SIGNAL_EXIT(_DONT_BLOCK); - /* - * Search all full buffers for the first matching the - * wanted segment. Clear other buffers on the fly. - */ - tail = ftape_get_buffer(ft_queue_tail); - while (!verify_done && tail->status == done) { - /* - * Allow escape from this loop on signal ! - */ - FT_SIGNAL_EXIT(_DONT_BLOCK); - if (tail->segment_id == segment_id) { - /* If out buffer is already full, - * return its contents. - */ - TRACE(ft_t_flow, "found segment in cache: %d", - segment_id); - if ((tail->soft_error_map | - tail->hard_error_map) != 0) { - TRACE(ft_t_info,"bsm[%d] = 0x%08lx", - segment_id, - (unsigned long) - (tail->soft_error_map | - tail->hard_error_map)); - *bsm = (tail->soft_error_map | - tail->hard_error_map); - } - verify_done = 1; - } else { - TRACE(ft_t_flow,"zapping segment in cache: %d", - tail->segment_id); - } - tail->status = waiting; - tail = ftape_next_buffer(ft_queue_tail); - } - if (!verify_done && tail->status == verifying) { - if (tail->segment_id == segment_id) { - switch(ftape_wait_segment(verifying)) { - case 0: - break; - case -EINTR: - TRACE_ABORT(-EINTR, ft_t_warn, - "interrupted by " - "non-blockable signal"); - break; - default: - ftape_abort_operation(); - ftape_set_state(verifying); - /* be picky */ - TRACE_ABORT(-EIO, ft_t_warn, - "wait_segment failed"); - } - } else { - /* We're reading the wrong segment, - * stop runner. - */ - TRACE(ft_t_noise, "verifying wrong segment"); - ftape_abort_operation(); - ftape_set_state(verifying); - } - } - /* should runner stop ? - */ - if (ft_runner_status == aborting) { - buffer_struct *head = ftape_get_buffer(ft_queue_head); - if (head->status == error || - head->status == verifying) { - /* no data or overrun error */ - head->status = waiting; - } - TRACE_CATCH(ftape_dumb_stop(),); - } else { - /* If just passed last segment on tape: wait - * for BOT or EOT mark. Sets ft_runner_status to - * idle if at lEOT and successful - */ - TRACE_CATCH(ftape_handle_logical_eot(),); - } - if (verify_done) { - TRACE_EXIT 0; - } - /* Now at least one buffer is idle! - * Restart runner & tape if needed. - */ - /* We could optimize the following a little bit. We know that - * the bad sector map is empty. - */ - tail = ftape_get_buffer(ft_queue_tail); - if (tail->status == waiting) { - buffer_struct *head = ftape_get_buffer(ft_queue_head); - - ftape_setup_new_segment(head, segment_id, -1); - ftape_calc_next_cluster(head); - if (ft_runner_status == idle) { - result = ftape_start_tape(segment_id, - head->sector_offset); - switch(result) { - case 0: - break; - case -ETIME: - case -EINTR: - TRACE_ABORT(result, ft_t_err, "Error: " - "segment %d unreachable", - segment_id); - break; - default: - *bsm = EMPTY_SEGMENT; - TRACE_EXIT 0; - break; - } - } - head->status = verifying; - fdc_setup_read_write(head, FDC_VERIFY); - } - } - /* not reached */ - TRACE_EXIT -EIO; -} diff --git a/drivers/char/ftape/lowlevel/ftape-format.h b/drivers/char/ftape/lowlevel/ftape-format.h deleted file mode 100644 index f1516156664..00000000000 --- a/drivers/char/ftape/lowlevel/ftape-format.h +++ /dev/null @@ -1,37 +0,0 @@ -#ifndef _FTAPE_FORMAT_H -#define _FTAPE_FORMAT_H - -/* - * Copyright (C) 1996-1997 Claus-Justus Heine. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; see the file COPYING. If not, write to - the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - - * - * $Source: /homes/cvs/ftape-stacked/ftape/lowlevel/ftape-format.h,v $ - * $Revision: 1.2 $ - * $Date: 1997/10/05 19:18:13 $ - * - * This file contains the low level definitions for the - * formatting support for the QIC-40/80/3010/3020 floppy-tape - * driver "ftape" for Linux. - */ - -#ifdef __KERNEL__ -extern int ftape_format_track(const unsigned int track, const __u8 gap3); -extern int ftape_format_status(unsigned int *segment_id); -extern int ftape_verify_segment(const unsigned int segment_id, SectorMap *bsm); -#endif /* __KERNEL__ */ - -#endif diff --git a/drivers/char/ftape/lowlevel/ftape-init.c b/drivers/char/ftape/lowlevel/ftape-init.c deleted file mode 100644 index 4998132a81d..00000000000 --- a/drivers/char/ftape/lowlevel/ftape-init.c +++ /dev/null @@ -1,160 +0,0 @@ -/* - * Copyright (C) 1993-1996 Bas Laarhoven, - * (C) 1996-1997 Claus-Justus Heine. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; see the file COPYING. If not, write to - the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - - * - * This file contains the code that interfaces the kernel - * for the QIC-40/80/3010/3020 floppy-tape driver for Linux. - */ - -#include <linux/module.h> -#include <linux/errno.h> -#include <linux/fs.h> -#include <linux/kernel.h> -#include <linux/signal.h> -#include <linux/major.h> - -#include <linux/ftape.h> -#include <linux/init.h> -#include <linux/qic117.h> -#ifdef CONFIG_ZFTAPE -#include <linux/zftape.h> -#endif - -#include "../lowlevel/ftape-init.h" -#include "../lowlevel/ftape-io.h" -#include "../lowlevel/ftape-read.h" -#include "../lowlevel/ftape-write.h" -#include "../lowlevel/ftape-ctl.h" -#include "../lowlevel/ftape-rw.h" -#include "../lowlevel/fdc-io.h" -#include "../lowlevel/ftape-buffer.h" -#include "../lowlevel/ftape-proc.h" -#include "../lowlevel/ftape-tracing.h" - - -#if defined(MODULE) && !defined(CONFIG_FT_NO_TRACE_AT_ALL) -static int ft_tracing = -1; -#endif - - -/* Called by modules package when installing the driver - * or by kernel during the initialization phase - */ -static int __init ftape_init(void) -{ - TRACE_FUN(ft_t_flow); - -#ifdef MODULE -#ifndef CONFIG_FT_NO_TRACE_AT_ALL - if (ft_tracing != -1) { - ftape_tracing = ft_tracing; - } -#endif - printk(KERN_INFO FTAPE_VERSION "\n"); - if (TRACE_LEVEL >= ft_t_info) { - printk( -KERN_INFO "(c) 1993-1996 Bas Laarhoven (bas@vimec.nl)\n" -KERN_INFO "(c) 1995-1996 Kai Harrekilde-Petersen (khp@dolphinics.no)\n" -KERN_INFO "(c) 1996-1997 Claus-Justus Heine (claus@momo.math.rwth-aachen.de)\n" -KERN_INFO "QIC-117 driver for QIC-40/80/3010/3020 floppy tape drives\n"); - } -#else /* !MODULE */ - /* print a short no-nonsense boot message */ - printk(KERN_INFO FTAPE_VERSION "\n"); -#endif /* MODULE */ - TRACE(ft_t_info, "installing QIC-117 floppy tape hardware drive ... "); - TRACE(ft_t_info, "ftape_init @ 0x%p", ftape_init); - /* Allocate the DMA buffers. They are deallocated at cleanup() time. - */ -#ifdef TESTING -#ifdef MODULE - while (ftape_set_nr_buffers(CONFIG_FT_NR_BUFFERS) < 0) { - ftape_sleep(FT_SECOND/20); - if (signal_pending(current)) { - (void)ftape_set_nr_buffers(0); - TRACE(ft_t_bug, - "Killed by signal while allocating buffers."); - TRACE_ABORT(-EINTR, - ft_t_bug, "Free up memory and retry"); - } - } -#else - TRACE_CATCH(ftape_set_nr_buffers(CONFIG_FT_NR_BUFFERS), - (void)ftape_set_nr_buffers(0)); -#endif -#else - TRACE_CATCH(ftape_set_nr_buffers(CONFIG_FT_NR_BUFFERS), - (void)ftape_set_nr_buffers(0)); -#endif - ft_drive_sel = -1; - ft_failure = 1; /* inhibit any operation but open */ - ftape_udelay_calibrate(); /* must be before fdc_wait_calibrate ! */ - fdc_wait_calibrate(); -#if defined(CONFIG_PROC_FS) && defined(CONFIG_FT_PROC_FS) - (void)ftape_proc_init(); -#endif -#ifdef CONFIG_ZFTAPE - (void)zft_init(); -#endif - TRACE_EXIT 0; -} - -module_param(ft_fdc_base, uint, 0); -MODULE_PARM_DESC(ft_fdc_base, "Base address of FDC controller."); -module_param(ft_fdc_irq, uint, 0); -MODULE_PARM_DESC(ft_fdc_irq, "IRQ (interrupt channel) to use."); -module_param(ft_fdc_dma, uint, 0); -MODULE_PARM_DESC(ft_fdc_dma, "DMA channel to use."); -module_param(ft_fdc_threshold, uint, 0); -MODULE_PARM_DESC(ft_fdc_threshold, "Threshold of the FDC Fifo."); -module_param(ft_fdc_rate_limit, uint, 0); -MODULE_PARM_DESC(ft_fdc_rate_limit, "Maximal data rate for FDC."); -module_param(ft_probe_fc10, bool, 0); -MODULE_PARM_DESC(ft_probe_fc10, - "If non-zero, probe for a Colorado FC-10/FC-20 controller."); -module_param(ft_mach2, bool, 0); -MODULE_PARM_DESC(ft_mach2, - "If non-zero, probe for a Mountain MACH-2 controller."); -#if defined(MODULE) && !defined(CONFIG_FT_NO_TRACE_AT_ALL) -module_param(ft_tracing, int, 0644); -MODULE_PARM_DESC(ft_tracing, - "Amount of debugging output, 0 <= tracing <= 8, default 3."); -#endif - -MODULE_AUTHOR( - "(c) 1993-1996 Bas Laarhoven (bas@vimec.nl), " - "(c) 1995-1996 Kai Harrekilde-Petersen (khp@dolphinics.no), " - "(c) 1996, 1997 Claus-Justus Heine (claus@momo.math.rwth-aachen.de)"); -MODULE_DESCRIPTION( - "QIC-117 driver for QIC-40/80/3010/3020 floppy tape drives."); -MODULE_LICENSE("GPL"); - -static void __exit ftape_exit(void) -{ - TRACE_FUN(ft_t_flow); - -#if defined(CONFIG_PROC_FS) && defined(CONFIG_FT_PROC_FS) - ftape_proc_destroy(); -#endif - (void)ftape_set_nr_buffers(0); - printk(KERN_INFO "ftape: unloaded.\n"); - TRACE_EXIT; -} - -module_init(ftape_init); -module_exit(ftape_exit); diff --git a/drivers/char/ftape/lowlevel/ftape-init.h b/drivers/char/ftape/lowlevel/ftape-init.h deleted file mode 100644 index 99a7b8ab086..00000000000 --- a/drivers/char/ftape/lowlevel/ftape-init.h +++ /dev/null @@ -1,43 +0,0 @@ -#ifndef _FTAPE_INIT_H -#define _FTAPE_INIT_H - -/* - * Copyright (C) 1993-1996 Bas Laarhoven, - * (C) 1996-1997 Claus-Justus Heine. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; see the file COPYING. If not, write to - the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - - * - * $Source: /homes/cvs/ftape-stacked/ftape/lowlevel/ftape-init.h,v $ - * $Revision: 1.2 $ - * $Date: 1997/10/05 19:18:16 $ - * - * This file contains the definitions for the interface to - * the Linux kernel for floppy tape driver ftape. - * - */ - -#include <linux/linkage.h> -#include <linux/signal.h> - -#define _NEVER_BLOCK (sigmask(SIGKILL) | sigmask(SIGSTOP)) -#define _DONT_BLOCK (_NEVER_BLOCK | sigmask(SIGINT)) -#define _DO_BLOCK (sigmask(SIGPIPE)) - -#ifndef QIC117_TAPE_MAJOR -#define QIC117_TAPE_MAJOR 27 -#endif - -#endif diff --git a/drivers/char/ftape/lowlevel/ftape-io.c b/drivers/char/ftape/lowlevel/ftape-io.c deleted file mode 100644 index 259015aeff5..00000000000 --- a/drivers/char/ftape/lowlevel/ftape-io.c +++ /dev/null @@ -1,992 +0,0 @@ -/* - * Copyright (C) 1993-1996 Bas Laarhoven, - * (C) 1996 Kai Harrekilde-Petersen, - * (C) 1997 Claus-Justus Heine. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; see the file COPYING. If not, write to - the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - - * - * $Source: /homes/cvs/ftape-stacked/ftape/lowlevel/ftape-io.c,v $ - * $Revision: 1.4 $ - * $Date: 1997/11/11 14:02:36 $ - * - * This file contains the general control functions for the - * QIC-40/80/3010/3020 floppy-tape driver "ftape" for Linux. - */ - -#include <linux/errno.h> -#include <linux/sched.h> -#include <linux/mm.h> -#include <asm/system.h> -#include <linux/ioctl.h> -#include <linux/mtio.h> -#include <linux/delay.h> - -#include <linux/ftape.h> -#include <linux/qic117.h> -#include "../lowlevel/ftape-tracing.h" -#include "../lowlevel/fdc-io.h" -#include "../lowlevel/ftape-io.h" -#include "../lowlevel/ftape-ctl.h" -#include "../lowlevel/ftape-rw.h" -#include "../lowlevel/ftape-write.h" -#include "../lowlevel/ftape-read.h" -#include "../lowlevel/ftape-init.h" -#include "../lowlevel/ftape-calibr.h" - -/* Global vars. - */ -/* NOTE: sectors start numbering at 1, all others at 0 ! */ -ft_timeout_table ftape_timeout; -unsigned int ftape_tape_len; -volatile qic117_cmd_t ftape_current_command; -const struct qic117_command_table qic117_cmds[] = QIC117_COMMANDS; -int ftape_might_be_off_track; - -/* Local vars. - */ -static int diagnostic_mode; -static unsigned int ftape_udelay_count; -static unsigned int ftape_udelay_time; - -void ftape_udelay(unsigned int usecs) -{ - volatile int count = (ftape_udelay_count * usecs + - ftape_udelay_count - 1) / ftape_udelay_time; - volatile int i; - - while (count-- > 0) { - for (i = 0; i < 20; ++i); - } -} - -void ftape_udelay_calibrate(void) -{ - ftape_calibrate("ftape_udelay", - ftape_udelay, &ftape_udelay_count, &ftape_udelay_time); -} - -/* Delay (msec) routine. - */ -void ftape_sleep(unsigned int time) -{ - TRACE_FUN(ft_t_any); - - time *= 1000; /* msecs -> usecs */ - if (time < FT_USPT) { - /* Time too small for scheduler, do a busy wait ! */ - ftape_udelay(time); - } else { - long timeout; - unsigned long flags; - unsigned int ticks = (time + FT_USPT - 1) / FT_USPT; - - TRACE(ft_t_any, "%d msec, %d ticks", time/1000, ticks); - timeout = ticks; - save_flags(flags); - sti(); - msleep_interruptible(jiffies_to_msecs(timeout)); - /* Mmm. Isn't current->blocked == 0xffffffff ? - */ - if (signal_pending(current)) { - TRACE(ft_t_err, "awoken by non-blocked signal :-("); - } - restore_flags(flags); - } - TRACE_EXIT; -} - -/* send a command or parameter to the drive - * Generates # of step pulses. - */ -static inline int ft_send_to_drive(int arg) -{ - /* Always wait for a command_timeout period to separate - * individuals commands and/or parameters. - */ - ftape_sleep(3 * FT_MILLISECOND); - /* Keep cylinder nr within range, step towards home if possible. - */ - if (ftape_current_cylinder >= arg) { - return fdc_seek(ftape_current_cylinder - arg); - } else { - return fdc_seek(ftape_current_cylinder + arg); - } -} - -/* forward */ int ftape_report_raw_drive_status(int *status); - -static int ft_check_cmd_restrictions(qic117_cmd_t command) -{ - int status = -1; - TRACE_FUN(ft_t_any); - - TRACE(ft_t_flow, "%s", qic117_cmds[command].name); - /* A new motion command during an uninterruptible (motion) - * command requires a ready status before the new command can - * be issued. Otherwise a new motion command needs to be - * checked against required status. - */ - if (qic117_cmds[command].cmd_type == motion && - qic117_cmds[ftape_current_command].non_intr) { - ftape_report_raw_drive_status(&status); - if ((status & QIC_STATUS_READY) == 0) { - TRACE(ft_t_noise, - "motion cmd (%d) during non-intr cmd (%d)", - command, ftape_current_command); - TRACE(ft_t_noise, "waiting until drive gets ready"); - ftape_ready_wait(ftape_timeout.seek, - &status); - } - } - if (qic117_cmds[command].mask != 0) { - __u8 difference; - /* Some commands do require a certain status: - */ - if (status == -1) { /* not yet set */ - ftape_report_raw_drive_status(&status); - } - difference = ((status ^ qic117_cmds[command].state) & - qic117_cmds[command].mask); - /* Wait until the drive gets - * ready. This may last forever if - * the drive never gets ready... - */ - while ((difference & QIC_STATUS_READY) != 0) { - TRACE(ft_t_noise, "command %d issued while not ready", - command); - TRACE(ft_t_noise, "waiting until drive gets ready"); - if (ftape_ready_wait(ftape_timeout.seek, - &status) == -EINTR) { - /* Bail out on signal ! - */ - TRACE_ABORT(-EINTR, ft_t_warn, - "interrupted by non-blockable signal"); - } - difference = ((status ^ qic117_cmds[command].state) & - qic117_cmds[command].mask); - } - while ((difference & QIC_STATUS_ERROR) != 0) { - int err; - qic117_cmd_t cmd; - - TRACE(ft_t_noise, - "command %d issued while error pending", - command); - TRACE(ft_t_noise, "clearing error status"); - ftape_report_error(&err, &cmd, 1); - ftape_report_raw_drive_status(&status); - difference = ((status ^ qic117_cmds[command].state) & - qic117_cmds[command].mask); - if ((difference & QIC_STATUS_ERROR) != 0) { - /* Bail out on fatal signal ! - */ - FT_SIGNAL_EXIT(_NEVER_BLOCK); - } - } - if (difference) { - /* Any remaining difference can't be solved - * here. - */ - if (difference & (QIC_STATUS_CARTRIDGE_PRESENT | - QIC_STATUS_NEW_CARTRIDGE | - QIC_STATUS_REFERENCED)) { - TRACE(ft_t_warn, - "Fatal: tape removed or reinserted !"); - ft_failure = 1; - } else { - TRACE(ft_t_err, "wrong state: 0x%02x should be: 0x%02x", - status & qic117_cmds[command].mask, - qic117_cmds[command].state); - } - TRACE_EXIT -EIO; - } - if (~status & QIC_STATUS_READY & qic117_cmds[command].mask) { - TRACE_ABORT(-EBUSY, ft_t_err, "Bad: still busy!"); - } - } - TRACE_EXIT 0; -} - -/* Issue a tape command: - */ -int ftape_command(qic117_cmd_t command) -{ - int result = 0; - static int level; - TRACE_FUN(ft_t_any); - - if ((unsigned int)command > NR_ITEMS(qic117_cmds)) { - /* This is a bug we'll want to know about too. - */ - TRACE_ABORT(-EIO, ft_t_bug, "bug - bad command: %d", command); - } - if (++level > 5) { /* This is a bug we'll want to know about. */ - --level; - TRACE_ABORT(-EIO, ft_t_bug, "bug - recursion for command: %d", - command); - } - /* disable logging and restriction check for some commands, - * check all other commands that have a prescribed starting - * status. - */ - if (diagnostic_mode) { - TRACE(ft_t_flow, "diagnostic command %d", command); - } else if (command == QIC_REPORT_DRIVE_STATUS || - command == QIC_REPORT_NEXT_BIT) { - TRACE(ft_t_any, "%s", qic117_cmds[command].name); - } else { - TRACE_CATCH(ft_check_cmd_restrictions(command), --level); - } - /* Now all conditions are met or result was < 0. - */ - result = ft_send_to_drive((unsigned int)command); - if (qic117_cmds[command].cmd_type == motion && - command != QIC_LOGICAL_FORWARD && command != QIC_STOP_TAPE) { - ft_location.known = 0; - } - ftape_current_command = command; - --level; - TRACE_EXIT result; -} - -/* Send a tape command parameter: - * Generates command # of step pulses. - * Skips tape-status call ! - */ -int ftape_parameter(unsigned int parameter) -{ - TRACE_FUN(ft_t_any); - - TRACE(ft_t_flow, "called with parameter = %d", parameter); - TRACE_EXIT ft_send_to_drive(parameter + 2); -} - -/* Wait for the drive to get ready. - * timeout time in milli-seconds - * Returned status is valid if result != -EIO - * - * Should we allow to be killed by SIGINT? (^C) - * Would be nice at least for large timeouts. - */ -int ftape_ready_wait(unsigned int timeout, int *status) -{ - unsigned long t0; - unsigned int poll_delay; - int signal_retries; - TRACE_FUN(ft_t_any); - - /* the following ** REALLY ** reduces the system load when - * e.g. one simply rewinds or retensions. The tape is slow - * anyway. It is really not necessary to detect error - * conditions with 1/10 seconds granularity - * - * On my AMD 133MHZ 486: 100 ms: 23% system load - * 1 sec: 5% - * 5 sec: 0.6%, yeah - */ - if (timeout <= FT_SECOND) { - poll_delay = 100 * FT_MILLISECOND; - signal_retries = 20; /* two seconds */ - } else if (timeout < 20 * FT_SECOND) { - TRACE(ft_t_flow, "setting poll delay to 1 second"); - poll_delay = FT_SECOND; - signal_retries = 2; /* two seconds */ - } else { - TRACE(ft_t_flow, "setting poll delay to 5 seconds"); - poll_delay = 5 * FT_SECOND; - signal_retries = 1; /* five seconds */ - } - for (;;) { - t0 = jiffies; - TRACE_CATCH(ftape_report_raw_drive_status(status),); - if (*status & QIC_STATUS_READY) { - TRACE_EXIT 0; - } - if (!signal_retries--) { - FT_SIGNAL_EXIT(_NEVER_BLOCK); - } - if ((int)timeout >= 0) { - /* this will fail when jiffies wraps around about - * once every year :-) - */ - timeout -= ((jiffies - t0) * FT_SECOND) / HZ; - if (timeout <= 0) { - TRACE_ABORT(-ETIME, ft_t_err, "timeout"); - } - ftape_sleep(poll_delay); - timeout -= poll_delay; - } else { - ftape_sleep(poll_delay); - } - } - TRACE_EXIT -ETIME; -} - -/* Issue command and wait up to timeout milli seconds for drive ready - */ -int ftape_command_wait(qic117_cmd_t command, unsigned int timeout, int *status) -{ - int result; - - /* Drive should be ready, issue command - */ - result = ftape_command(command); - if (result >= 0) { - result = ftape_ready_wait(timeout, status); - } - return result; -} - -static int ftape_parameter_wait(unsigned int parm, unsigned int timeout, int *status) -{ - int result; - - /* Drive should be ready, issue command - */ - result = ftape_parameter(parm); - if (result >= 0) { - result = ftape_ready_wait(timeout, status); - } - return result; -} - -/*-------------------------------------------------------------------------- - * Report operations - */ - -/* Query the drive about its status. The command is sent and - result_length bits of status are returned (2 extra bits are read - for start and stop). */ - -int ftape_report_operation(int *status, - qic117_cmd_t command, - int result_length) -{ - int i, st3; - unsigned int t0; - unsigned int dt; - TRACE_FUN(ft_t_any); - - TRACE_CATCH(ftape_command(command),); - t0 = ftape_timestamp(); - i = 0; - do { - ++i; - ftape_sleep(3 * FT_MILLISECOND); /* see remark below */ - TRACE_CATCH(fdc_sense_drive_status(&st3),); - dt = ftape_timediff(t0, ftape_timestamp()); - /* Ack should be asserted within Ttimout + Tack = 6 msec. - * Looks like some drives fail to do this so extend this - * period to 300 msec. - */ - } while (!(st3 & ST3_TRACK_0) && dt < 300000); - if (!(st3 & ST3_TRACK_0)) { - TRACE(ft_t_err, - "No acknowledge after %u msec. (%i iter)", dt / 1000, i); - TRACE_ABORT(-EIO, ft_t_err, "timeout on Acknowledge"); - } - /* dt may be larger than expected because of other tasks - * scheduled while we were sleeping. - */ - if (i > 1 && dt > 6000) { - TRACE(ft_t_err, "Acknowledge after %u msec. (%i iter)", - dt / 1000, i); - } - *status = 0; - for (i = 0; i < result_length + 1; i++) { - TRACE_CATCH(ftape_command(QIC_REPORT_NEXT_BIT),); - TRACE_CATCH(fdc_sense_drive_status(&st3),); - if (i < result_length) { - *status |= ((st3 & ST3_TRACK_0) ? 1 : 0) << i; - } else if ((st3 & ST3_TRACK_0) == 0) { - TRACE_ABORT(-EIO, ft_t_err, "missing status stop bit"); - } - } - /* this command will put track zero and index back into normal state */ - (void)ftape_command(QIC_REPORT_NEXT_BIT); - TRACE_EXIT 0; -} - -/* Report the current drive status. */ - -int ftape_report_raw_drive_status(int *status) -{ - int result; - int count = 0; - TRACE_FUN(ft_t_any); - - do { - result = ftape_report_operation(status, - QIC_REPORT_DRIVE_STATUS, 8); - } while (result < 0 && ++count <= 3); - if (result < 0) { - TRACE_ABORT(-EIO, ft_t_err, - "report_operation failed after %d trials", count); - } - if ((*status & 0xff) == 0xff) { - TRACE_ABORT(-EIO, ft_t_err, - "impossible drive status 0xff"); - } - if (*status & QIC_STATUS_READY) { - ftape_current_command = QIC_NO_COMMAND; /* completed */ - } - ft_last_status.status.drive_status = (__u8)(*status & 0xff); - TRACE_EXIT 0; -} - -int ftape_report_drive_status(int *status) -{ - TRACE_FUN(ft_t_any); - - TRACE_CATCH(ftape_report_raw_drive_status(status),); - if (*status & QIC_STATUS_NEW_CARTRIDGE || - !(*status & QIC_STATUS_CARTRIDGE_PRESENT)) { - ft_failure = 1; /* will inhibit further operations */ - TRACE_EXIT -EIO; - } - if (*status & QIC_STATUS_READY && *status & QIC_STATUS_ERROR) { - /* Let caller handle all errors */ - TRACE_ABORT(1, ft_t_warn, "warning: error status set!"); - } - TRACE_EXIT 0; -} - -int ftape_report_error(unsigned int *error, - qic117_cmd_t *command, int report) -{ - static const ftape_error ftape_errors[] = QIC117_ERRORS; - int code; - TRACE_FUN(ft_t_any); - - TRACE_CATCH(ftape_report_operation(&code, QIC_REPORT_ERROR_CODE, 16),); - *error = (unsigned int)(code & 0xff); - *command = (qic117_cmd_t)((code>>8)&0xff); - /* remember hardware status, maybe useful for status ioctls - */ - ft_last_error.error.command = (__u8)*command; - ft_last_error.error.error = (__u8)*error; - if (!report) { - TRACE_EXIT 0; - } - if (*error == 0) { - TRACE_ABORT(0, ft_t_info, "No error"); - } - TRACE(ft_t_info, "errorcode: %d", *error); - if (*error < NR_ITEMS(ftape_errors)) { - TRACE(ft_t_noise, "%sFatal ERROR:", - (ftape_errors[*error].fatal ? "" : "Non-")); - TRACE(ft_t_noise, "%s ...", ftape_errors[*error].message); - } else { - TRACE(ft_t_noise, "Unknown ERROR !"); - } - if ((unsigned int)*command < NR_ITEMS(qic117_cmds) && - qic117_cmds[*command].name != NULL) { - TRACE(ft_t_noise, "... caused by command \'%s\'", - qic117_cmds[*command].name); - } else { - TRACE(ft_t_noise, "... caused by unknown command %d", - *command); - } - TRACE_EXIT 0; -} - -int ftape_report_configuration(qic_model *model, - unsigned int *rate, - int *qic_std, - int *tape_len) -{ - int result; - int config; - int status; - static const unsigned int qic_rates[ 4] = { 250, 2000, 500, 1000 }; - TRACE_FUN(ft_t_any); - - result = ftape_report_operation(&config, - QIC_REPORT_DRIVE_CONFIGURATION, 8); - if (result < 0) { - ft_last_status.status.drive_config = (__u8)0x00; - *model = prehistoric; - *rate = 500; - *qic_std = QIC_TAPE_QIC40; - *tape_len = 205; - TRACE_EXIT 0; - } else { - ft_last_status.status.drive_config = (__u8)(config & 0xff); - } - *rate = qic_rates[(config & QIC_CONFIG_RATE_MASK) >> QIC_CONFIG_RATE_SHIFT]; - result = ftape_report_operation(&status, QIC_REPORT_TAPE_STATUS, 8); - if (result < 0) { - ft_last_status.status.tape_status = (__u8)0x00; - /* pre- QIC117 rev C spec. drive, QIC_CONFIG_80 bit is valid. - */ - *qic_std = (config & QIC_CONFIG_80) ? - QIC_TAPE_QIC80 : QIC_TAPE_QIC40; - /* ?? how's about 425ft tapes? */ - *tape_len = (config & QIC_CONFIG_LONG) ? 307 : 0; - *model = pre_qic117c; - result = 0; - } else { - ft_last_status.status.tape_status = (__u8)(status & 0xff); - *model = post_qic117b; - TRACE(ft_t_any, "report tape status result = %02x", status); - /* post- QIC117 rev C spec. drive, QIC_CONFIG_80 bit is - * invalid. - */ - switch (status & QIC_TAPE_STD_MASK) { - case QIC_TAPE_QIC40: - case QIC_TAPE_QIC80: - case QIC_TAPE_QIC3020: - case QIC_TAPE_QIC3010: - *qic_std = status & QIC_TAPE_STD_MASK; - break; - default: - *qic_std = -1; - break; - } - switch (status & QIC_TAPE_LEN_MASK) { - case QIC_TAPE_205FT: - /* 205 or 425+ ft 550 Oe tape */ - *tape_len = 0; - break; - case QIC_TAPE_307FT: - /* 307.5 ft 550 Oe Extended Length (XL) tape */ - *tape_len = 307; - break; - case QIC_TAPE_VARIABLE: - /* Variable length 550 Oe tape */ - *tape_len = 0; - break; - case QIC_TAPE_1100FT: - /* 1100 ft 550 Oe tape */ - *tape_len = 1100; - break; - case QIC_TAPE_FLEX: - /* Variable length 900 Oe tape */ - *tape_len = 0; - break; - default: - *tape_len = -1; - break; - } - if (*qic_std == -1 || *tape_len == -1) { - TRACE(ft_t_any, - "post qic-117b spec drive with unknown tape"); - } - result = *tape_len == -1 ? -EIO : 0; - if (status & QIC_TAPE_WIDE) { - switch (*qic_std) { - case QIC_TAPE_QIC80: - TRACE(ft_t_info, "TR-1 tape detected"); - break; - case QIC_TAPE_QIC3010: - TRACE(ft_t_info, "TR-2 tape detected"); - break; - case QIC_TAPE_QIC3020: - TRACE(ft_t_info, "TR-3 tape detected"); - break; - default: - TRACE(ft_t_warn, - "Unknown Travan tape type detected"); - break; - } - } - } - TRACE_EXIT (result < 0) ? -EIO : 0; -} - -static int ftape_report_rom_version(int *version) -{ - - if (ftape_report_operation(version, QIC_REPORT_ROM_VERSION, 8) < 0) { - return -EIO; - } else { - return 0; - } -} - -void ftape_report_vendor_id(unsigned int *id) -{ - int result; - TRACE_FUN(ft_t_any); - - /* We'll try to get a vendor id from the drive. First - * according to the QIC-117 spec, a 16-bit id is requested. - * If that fails we'll try an 8-bit version, otherwise we'll - * try an undocumented query. - */ - result = ftape_report_operation((int *) id, QIC_REPORT_VENDOR_ID, 16); - if (result < 0) { - result = ftape_report_operation((int *) id, - QIC_REPORT_VENDOR_ID, 8); - if (result < 0) { - /* The following is an undocumented call found - * in the CMS code. - */ - result = ftape_report_operation((int *) id, 24, 8); - if (result < 0) { - *id = UNKNOWN_VENDOR; - } else { - TRACE(ft_t_noise, "got old 8 bit id: %04x", - *id); - *id |= 0x20000; - } - } else { - TRACE(ft_t_noise, "got 8 bit id: %04x", *id); - *id |= 0x10000; - } - } else { - TRACE(ft_t_noise, "got 16 bit id: %04x", *id); - } - if (*id == 0x0047) { - int version; - int sign; - - if (ftape_report_rom_version(&version) < 0) { - TRACE(ft_t_bug, "report rom version failed"); - TRACE_EXIT; - } - TRACE(ft_t_noise, "CMS rom version: %d", version); - ftape_command(QIC_ENTER_DIAGNOSTIC_1); - ftape_command(QIC_ENTER_DIAGNOSTIC_1); - diagnostic_mode = 1; - if (ftape_report_operation(&sign, 9, 8) < 0) { - unsigned int error; - qic117_cmd_t command; - - ftape_report_error(&error, &command, 1); - ftape_command(QIC_ENTER_PRIMARY_MODE); - diagnostic_mode = 0; - TRACE_EXIT; /* failure ! */ - } else { - TRACE(ft_t_noise, "CMS signature: %02x", sign); - } - if (sign == 0xa5) { - result = ftape_report_operation(&sign, 37, 8); - if (result < 0) { - if (version >= 63) { - *id = 0x8880; - TRACE(ft_t_noise, - "This is an Iomega drive !"); - } else { - *id = 0x0047; - TRACE(ft_t_noise, - "This is a real CMS drive !"); - } - } else { - *id = 0x0047; - TRACE(ft_t_noise, "CMS status: %d", sign); - } - } else { - *id = UNKNOWN_VENDOR; - } - ftape_command(QIC_ENTER_PRIMARY_MODE); - diagnostic_mode = 0; - } - TRACE_EXIT; -} - -static int qic_rate_code(unsigned int rate) -{ - switch (rate) { - case 250: - return QIC_CONFIG_RATE_250; - case 500: - return QIC_CONFIG_RATE_500; - case 1000: - return QIC_CONFIG_RATE_1000; - case 2000: - return QIC_CONFIG_RATE_2000; - default: - return QIC_CONFIG_RATE_500; - } -} - -static int ftape_set_rate_test(unsigned int *max_rate) -{ - unsigned int error; - qic117_cmd_t command; - int status; - int supported = 0; - TRACE_FUN(ft_t_any); - - /* Check if the drive does support the select rate command - * by testing all different settings. If any one is accepted - * we assume the command is supported, else not. - */ - for (*max_rate = 2000; *max_rate >= 250; *max_rate /= 2) { - if (ftape_command(QIC_SELECT_RATE) < 0) { - continue; - } - if (ftape_parameter_wait(qic_rate_code(*max_rate), - 1 * FT_SECOND, &status) < 0) { - continue; - } - if (status & QIC_STATUS_ERROR) { - ftape_report_error(&error, &command, 0); - continue; - } - supported = 1; /* did accept a request */ - break; - } - TRACE(ft_t_noise, "Select Rate command is%s supported", - supported ? "" : " not"); - TRACE_EXIT supported; -} - -int ftape_set_data_rate(unsigned int new_rate /* Kbps */, unsigned int qic_std) -{ - int status; - int result = 0; - unsigned int data_rate = new_rate; - static int supported; - int rate_changed = 0; - qic_model dummy_model; - unsigned int dummy_qic_std, dummy_tape_len; - TRACE_FUN(ft_t_any); - - if (ft_drive_max_rate == 0) { /* first time */ - supported = ftape_set_rate_test(&ft_drive_max_rate); - } - if (supported) { - ftape_command(QIC_SELECT_RATE); - result = ftape_parameter_wait(qic_rate_code(new_rate), - 1 * FT_SECOND, &status); - if (result >= 0 && !(status & QIC_STATUS_ERROR)) { - rate_changed = 1; - } - } - TRACE_CATCH(result = ftape_report_configuration(&dummy_model, - &data_rate, - &dummy_qic_std, - &dummy_tape_len),); - if (data_rate != new_rate) { - if (!supported) { - TRACE(ft_t_warn, "Rate change not supported!"); - } else if (rate_changed) { - TRACE(ft_t_warn, "Requested: %d, got %d", - new_rate, data_rate); - } else { - TRACE(ft_t_warn, "Rate change failed!"); - } - result = -EINVAL; - } - /* - * Set data rate and write precompensation as specified: - * - * | QIC-40/80 | QIC-3010/3020 - * rate | precomp | precomp - * ----------+-------------+-------------- - * 250 Kbps. | 250 ns. | 0 ns. - * 500 Kbps. | 125 ns. | 0 ns. - * 1 Mbps. | 42 ns. | 0 ns. - * 2 Mbps | N/A | 0 ns. - */ - if ((qic_std == QIC_TAPE_QIC40 && data_rate > 500) || - (qic_std == QIC_TAPE_QIC80 && data_rate > 1000)) { - TRACE_ABORT(-EINVAL, - ft_t_warn, "Datarate too high for QIC-mode"); - } - TRACE_CATCH(fdc_set_data_rate(data_rate),_res = -EINVAL); - ft_data_rate = data_rate; - if (qic_std == QIC_TAPE_QIC40 || qic_std == QIC_TAPE_QIC80) { - switch (data_rate) { - case 250: - fdc_set_write_precomp(250); - break; - default: - case 500: - fdc_set_write_precomp(125); - break; - case 1000: - fdc_set_write_precomp(42); - break; - } - } else { - fdc_set_write_precomp(0); - } - TRACE_EXIT result; -} - -/* The next two functions are used to cope with excessive overrun errors - */ -int ftape_increase_threshold(void) -{ - TRACE_FUN(ft_t_flow); - - if (fdc.type < i82077 || ft_fdc_threshold >= 12) { - TRACE_ABORT(-EIO, ft_t_err, "cannot increase fifo threshold"); - } - if (fdc_fifo_threshold(++ft_fdc_threshold, NULL, NULL, NULL) < 0) { - TRACE(ft_t_err, "cannot increase fifo threshold"); - ft_fdc_threshold --; - fdc_reset(); - } - TRACE(ft_t_info, "New FIFO threshold: %d", ft_fdc_threshold); - TRACE_EXIT 0; -} - -int ftape_half_data_rate(void) -{ - if (ft_data_rate < 500) { - return -1; - } - if (ftape_set_data_rate(ft_data_rate / 2, ft_qic_std) < 0) { - return -EIO; - } - ftape_calc_timeouts(ft_qic_std, ft_data_rate, ftape_tape_len); - return 0; -} - -/* Seek the head to the specified track. - */ -int ftape_seek_head_to_track(unsigned int track) -{ - int status; - TRACE_FUN(ft_t_any); - - ft_location.track = -1; /* remains set in case of error */ - if (track >= ft_tracks_per_tape) { - TRACE_ABORT(-EINVAL, ft_t_bug, "track out of bounds"); - } - TRACE(ft_t_flow, "seeking track %d", track); - TRACE_CATCH(ftape_command(QIC_SEEK_HEAD_TO_TRACK),); - TRACE_CATCH(ftape_parameter_wait(track, ftape_timeout.head_seek, - &status),); - ft_location.track = track; - ftape_might_be_off_track = 0; - TRACE_EXIT 0; -} - -int ftape_wakeup_drive(wake_up_types method) -{ - int status; - int motor_on = 0; - TRACE_FUN(ft_t_any); - - switch (method) { - case wake_up_colorado: - TRACE_CATCH(ftape_command(QIC_PHANTOM_SELECT),); - TRACE_CATCH(ftape_parameter(0 /* ft_drive_sel ?? */),); - break; - case wake_up_mountain: - TRACE_CATCH(ftape_command(QIC_SOFT_SELECT),); - ftape_sleep(FT_MILLISECOND); /* NEEDED */ - TRACE_CATCH(ftape_parameter(18),); - break; - case wake_up_insight: - ftape_sleep(100 * FT_MILLISECOND); - motor_on = 1; - fdc_motor(motor_on); /* enable is done by motor-on */ - case no_wake_up: - break; - default: - TRACE_EXIT -ENODEV; /* unknown wakeup method */ - break; - } - /* If wakeup succeeded we shouldn't get an error here.. - */ - TRACE_CATCH(ftape_report_raw_drive_status(&status), - if (motor_on) { - fdc_motor(0); - }); - TRACE_EXIT 0; -} - -int ftape_put_drive_to_sleep(wake_up_types method) -{ - TRACE_FUN(ft_t_any); - - switch (method) { - case wake_up_colorado: - TRACE_CATCH(ftape_command(QIC_PHANTOM_DESELECT),); - break; - case wake_up_mountain: - TRACE_CATCH(ftape_command(QIC_SOFT_DESELECT),); - break; - case wake_up_insight: - fdc_motor(0); /* enable is done by motor-on */ - case no_wake_up: /* no wakeup / no sleep ! */ - break; - default: - TRACE_EXIT -ENODEV; /* unknown wakeup method */ - } - TRACE_EXIT 0; -} - -int ftape_reset_drive(void) -{ - int result = 0; - int status; - unsigned int err_code; - qic117_cmd_t err_command; - int i; - TRACE_FUN(ft_t_any); - - /* We want to re-establish contact with our drive. Fire a - * number of reset commands (single step pulses) and pray for - * success. - */ - for (i = 0; i < 2; ++i) { - TRACE(ft_t_flow, "Resetting fdc"); - fdc_reset(); - ftape_sleep(10 * FT_MILLISECOND); - TRACE(ft_t_flow, "Reset command to drive"); - result = ftape_command(QIC_RESET); - if (result == 0) { - ftape_sleep(1 * FT_SECOND); /* drive not - * accessible - * during 1 second - */ - TRACE(ft_t_flow, "Re-selecting drive"); - - /* Strange, the QIC-117 specs don't mention - * this but the drive gets deselected after a - * soft reset ! So we need to enable it - * again. - */ - if (ftape_wakeup_drive(ft_drive_type.wake_up) < 0) { - TRACE(ft_t_err, "Wakeup failed !"); - } - TRACE(ft_t_flow, "Waiting until drive gets ready"); - result= ftape_ready_wait(ftape_timeout.reset, &status); - if (result == 0 && (status & QIC_STATUS_ERROR)) { - result = ftape_report_error(&err_code, - &err_command, 1); - if (result == 0 && err_code == 27) { - /* Okay, drive saw reset - * command and responded as it - * should - */ - break; - } else { - result = -EIO; - } - } else { - result = -EIO; - } - } - FT_SIGNAL_EXIT(_DONT_BLOCK); - } - if (result != 0) { - TRACE(ft_t_err, "General failure to reset tape drive"); - } else { - /* Restore correct settings: keep original rate - */ - ftape_set_data_rate(ft_data_rate, ft_qic_std); - } - ftape_init_drive_needed = 1; - TRACE_EXIT result; -} diff --git a/drivers/char/ftape/lowlevel/ftape-io.h b/drivers/char/ftape/lowlevel/ftape-io.h deleted file mode 100644 index 26a7baad871..00000000000 --- a/drivers/char/ftape/lowlevel/ftape-io.h +++ /dev/null @@ -1,90 +0,0 @@ -#ifndef _FTAPE_IO_H -#define _FTAPE_IO_H - -/* - * Copyright (C) 1993-1996 Bas Laarhoven, - * (C) 1997 Claus-Justus Heine. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; see the file COPYING. If not, write to - the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - - * - * $Source: /homes/cvs/ftape-stacked/ftape/lowlevel/ftape-io.h,v $ - * $Revision: 1.2 $ - * $Date: 1997/10/05 19:18:18 $ - * - * This file contains definitions for the glue part of the - * QIC-40/80/3010/3020 floppy-tape driver "ftape" for Linux. - */ - -#include <linux/qic117.h> -#include <linux/ftape-vendors.h> - -typedef struct { - unsigned int seek; - unsigned int reset; - unsigned int rewind; - unsigned int head_seek; - unsigned int stop; - unsigned int pause; -} ft_timeout_table; - -typedef enum { - prehistoric, pre_qic117c, post_qic117b, post_qic117d -} qic_model; - -/* - * ftape-io.c defined global vars. - */ -extern ft_timeout_table ftape_timeout; -extern unsigned int ftape_tape_len; -extern volatile qic117_cmd_t ftape_current_command; -extern const struct qic117_command_table qic117_cmds[]; -extern int ftape_might_be_off_track; - -/* - * ftape-io.c defined global functions. - */ -extern void ftape_udelay(unsigned int usecs); -extern void ftape_udelay_calibrate(void); -extern void ftape_sleep(unsigned int time); -extern void ftape_report_vendor_id(unsigned int *id); -extern int ftape_command(qic117_cmd_t command); -extern int ftape_command_wait(qic117_cmd_t command, - unsigned int timeout, - int *status); -extern int ftape_parameter(unsigned int parameter); -extern int ftape_report_operation(int *status, - qic117_cmd_t command, - int result_length); -extern int ftape_report_configuration(qic_model *model, - unsigned int *rate, - int *qic_std, - int *tape_len); -extern int ftape_report_drive_status(int *status); -extern int ftape_report_raw_drive_status(int *status); -extern int ftape_report_status(int *status); -extern int ftape_ready_wait(unsigned int timeout, int *status); -extern int ftape_seek_head_to_track(unsigned int track); -extern int ftape_set_data_rate(unsigned int new_rate, unsigned int qic_std); -extern int ftape_report_error(unsigned int *error, - qic117_cmd_t *command, - int report); -extern int ftape_reset_drive(void); -extern int ftape_put_drive_to_sleep(wake_up_types method); -extern int ftape_wakeup_drive(wake_up_types method); -extern int ftape_increase_threshold(void); -extern int ftape_half_data_rate(void); - -#endif diff --git a/drivers/char/ftape/lowlevel/ftape-proc.c b/drivers/char/ftape/lowlevel/ftape-proc.c deleted file mode 100644 index e805b15e0a1..00000000000 --- a/drivers/char/ftape/lowlevel/ftape-proc.c +++ /dev/null @@ -1,214 +0,0 @@ -/* - * Copyright (C) 1997 Claus-Justus Heine - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; see the file COPYING. If not, write to - the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - - * - * $Source: /homes/cvs/ftape-stacked/ftape/lowlevel/ftape-proc.c,v $ - * $Revision: 1.11 $ - * $Date: 1997/10/24 14:47:37 $ - * - * This file contains the procfs interface for the - * QIC-40/80/3010/3020 floppy-tape driver "ftape" for Linux. - - * Old code removed, switched to dynamic proc entry. - */ - - -#if defined(CONFIG_PROC_FS) && defined(CONFIG_FT_PROC_FS) - -#include <linux/proc_fs.h> - -#include <linux/ftape.h> -#include <linux/init.h> -#include <linux/qic117.h> - -#include "../lowlevel/ftape-io.h" -#include "../lowlevel/ftape-ctl.h" -#include "../lowlevel/ftape-proc.h" -#include "../lowlevel/ftape-tracing.h" - -static size_t get_driver_info(char *buf) -{ - const char *debug_level[] = { "bugs" , - "errors", - "warnings", - "informational", - "noisy", - "program flow", - "fdc and dma", - "data flow", - "anything" }; - - return sprintf(buf, - "version : %s\n" - "used data rate: %d kbit/sec\n" - "dma memory : %d kb\n" - "debug messages: %s\n", - FTAPE_VERSION, - ft_data_rate, - FT_BUFF_SIZE * ft_nr_buffers >> 10, - debug_level[TRACE_LEVEL]); -} - -static size_t get_tapedrive_info(char *buf) -{ - return sprintf(buf, - "vendor id : 0x%04x\n" - "drive name: %s\n" - "wind speed: %d ips\n" - "wakeup : %s\n" - "max. rate : %d kbit/sec\n", - ft_drive_type.vendor_id, - ft_drive_type.name, - ft_drive_type.speed, - ((ft_drive_type.wake_up == no_wake_up) - ? "No wakeup needed" : - ((ft_drive_type.wake_up == wake_up_colorado) - ? "Colorado" : - ((ft_drive_type.wake_up == wake_up_mountain) - ? "Mountain" : - ((ft_drive_type.wake_up == wake_up_insight) - ? "Motor on" : - "Unknown")))), - ft_drive_max_rate); -} - -static size_t get_cartridge_info(char *buf) -{ - if (ftape_init_drive_needed) { - return sprintf(buf, "uninitialized\n"); - } - if (ft_no_tape) { - return sprintf(buf, "no cartridge inserted\n"); - } - return sprintf(buf, - "segments : %5d\n" - "tracks : %5d\n" - "length : %5dft\n" - "formatted : %3s\n" - "writable : %3s\n" - "QIC spec. : QIC-%s\n" - "fmt-code : %1d\n", - ft_segments_per_track, - ft_tracks_per_tape, - ftape_tape_len, - (ft_formatted == 1) ? "yes" : "no", - (ft_write_protected == 1) ? "no" : "yes", - ((ft_qic_std == QIC_TAPE_QIC40) ? "40" : - ((ft_qic_std == QIC_TAPE_QIC80) ? "80" : - ((ft_qic_std == QIC_TAPE_QIC3010) ? "3010" : - ((ft_qic_std == QIC_TAPE_QIC3020) ? "3020" : - "???")))), - ft_format_code); -} - -static size_t get_controller_info(char *buf) -{ - const char *fdc_name[] = { "no fdc", - "i8272", - "i82077", - "i82077AA", - "Colorado FC-10 or FC-20", - "i82078", - "i82078_1" }; - - return sprintf(buf, - "FDC type : %s\n" - "FDC base : 0x%03x\n" - "FDC irq : %d\n" - "FDC dma : %d\n" - "FDC thr. : %d\n" - "max. rate : %d kbit/sec\n", - ft_mach2 ? "Mountain MACH-2" : fdc_name[fdc.type], - fdc.sra, fdc.irq, fdc.dma, - ft_fdc_threshold, ft_fdc_max_rate); -} - -static size_t get_history_info(char *buf) -{ - size_t len; - - len = sprintf(buf, - "\nFDC isr statistics\n" - " id_am_errors : %3d\n" - " id_crc_errors : %3d\n" - " data_am_errors : %3d\n" - " data_crc_errors : %3d\n" - " overrun_errors : %3d\n" - " no_data_errors : %3d\n" - " retries : %3d\n", - ft_history.id_am_errors, ft_history.id_crc_errors, - ft_history.data_am_errors, ft_history.data_crc_errors, - ft_history.overrun_errors, ft_history.no_data_errors, - ft_history.retries); - len += sprintf(buf + len, - "\nECC statistics\n" - " crc_errors : %3d\n" - " crc_failures : %3d\n" - " ecc_failures : %3d\n" - " sectors corrected: %3d\n", - ft_history.crc_errors, ft_history.crc_failures, - ft_history.ecc_failures, ft_history.corrected); - len += sprintf(buf + len, - "\ntape quality statistics\n" - " media defects : %3d\n", - ft_history.defects); - len += sprintf(buf + len, - "\ntape motion statistics\n" - " repositions : %3d\n", - ft_history.rewinds); - return len; -} - -static int ftape_read_proc(char *page, char **start, off_t off, - int count, int *eof, void *data) -{ - char *ptr = page; - size_t len; - - ptr += sprintf(ptr, "Kernel Driver\n\n"); - ptr += get_driver_info(ptr); - ptr += sprintf(ptr, "\nTape Drive\n\n"); - ptr += get_tapedrive_info(ptr); - ptr += sprintf(ptr, "\nFDC Controller\n\n"); - ptr += get_controller_info(ptr); - ptr += sprintf(ptr, "\nTape Cartridge\n\n"); - ptr += get_cartridge_info(ptr); - ptr += sprintf(ptr, "\nHistory Record\n\n"); - ptr += get_history_info(ptr); - - len = strlen(page); - *start = NULL; - if (off+count >= len) { - *eof = 1; - } else { - *eof = 0; - } - return len; -} - -int __init ftape_proc_init(void) -{ - return create_proc_read_entry("ftape", 0, &proc_root, - ftape_read_proc, NULL) != NULL; -} - -void ftape_proc_destroy(void) -{ - remove_proc_entry("ftape", &proc_root); -} - -#endif /* defined(CONFIG_PROC_FS) && defined(CONFIG_FT_PROC_FS) */ diff --git a/drivers/char/ftape/lowlevel/ftape-proc.h b/drivers/char/ftape/lowlevel/ftape-proc.h deleted file mode 100644 index 264dfcc1d22..00000000000 --- a/drivers/char/ftape/lowlevel/ftape-proc.h +++ /dev/null @@ -1,35 +0,0 @@ -#ifndef _FTAPE_PROC_H -#define _FTAPE_PROC_H - -/* - * Copyright (C) 1997 Claus-Justus Heine - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; see the file COPYING. If not, write to - the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - - * - * $Source: /homes/cvs/ftape-stacked/ftape/lowlevel/ftape-proc.h,v $ - * $Revision: 1.2 $ - * $Date: 1997/10/05 19:18:20 $ - * - * This file contains definitions for the procfs interface of the - * QIC-40/80/3010/3020 floppy-tape driver "ftape" for Linux. - */ - -#include <linux/proc_fs.h> - -extern int ftape_proc_init(void); -extern void ftape_proc_destroy(void); - -#endif diff --git a/drivers/char/ftape/lowlevel/ftape-read.c b/drivers/char/ftape/lowlevel/ftape-read.c deleted file mode 100644 index d967d8cd86d..00000000000 --- a/drivers/char/ftape/lowlevel/ftape-read.c +++ /dev/null @@ -1,621 +0,0 @@ -/* - * Copyright (C) 1993-1996 Bas Laarhoven, - * (C) 1996-1997 Claus-Justus Heine. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; see the file COPYING. If not, write to - the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - - * - * $Source: /homes/cvs/ftape-stacked/ftape/lowlevel/ftape-read.c,v $ - * $Revision: 1.6 $ - * $Date: 1997/10/21 14:39:22 $ - * - * This file contains the reading code - * for the QIC-117 floppy-tape driver for Linux. - * - */ - -#include <linux/string.h> -#include <linux/errno.h> -#include <linux/mm.h> - -#include <linux/ftape.h> -#include <linux/qic117.h> -#include "../lowlevel/ftape-tracing.h" -#include "../lowlevel/ftape-read.h" -#include "../lowlevel/ftape-io.h" -#include "../lowlevel/ftape-ctl.h" -#include "../lowlevel/ftape-rw.h" -#include "../lowlevel/ftape-write.h" -#include "../lowlevel/ftape-ecc.h" -#include "../lowlevel/ftape-bsm.h" - -/* Global vars. - */ - -/* Local vars. - */ - -void ftape_zap_read_buffers(void) -{ - int i; - - for (i = 0; i < ft_nr_buffers; ++i) { -/* changed to "fit" with dynamic allocation of tape_buffer. --khp */ - ft_buffer[i]->status = waiting; - ft_buffer[i]->bytes = 0; - ft_buffer[i]->skip = 0; - ft_buffer[i]->retry = 0; - } -/* ftape_reset_buffer(); */ -} - -static SectorMap convert_sector_map(buffer_struct * buff) -{ - int i = 0; - SectorMap bad_map = ftape_get_bad_sector_entry(buff->segment_id); - SectorMap src_map = buff->soft_error_map | buff->hard_error_map; - SectorMap dst_map = 0; - TRACE_FUN(ft_t_any); - - if (bad_map || src_map) { - TRACE(ft_t_flow, "bad_map = 0x%08lx", (long) bad_map); - TRACE(ft_t_flow, "src_map = 0x%08lx", (long) src_map); - } - while (bad_map) { - while ((bad_map & 1) == 0) { - if (src_map & 1) { - dst_map |= (1 << i); - } - src_map >>= 1; - bad_map >>= 1; - ++i; - } - /* (bad_map & 1) == 1 */ - src_map >>= 1; - bad_map >>= 1; - } - if (src_map) { - dst_map |= (src_map << i); - } - if (dst_map) { - TRACE(ft_t_flow, "dst_map = 0x%08lx", (long) dst_map); - } - TRACE_EXIT dst_map; -} - -static int correct_and_copy_fraction(buffer_struct *buff, __u8 * destination, - int start, int size) -{ - struct memory_segment mseg; - int result; - SectorMap read_bad; - TRACE_FUN(ft_t_any); - - mseg.read_bad = convert_sector_map(buff); - mseg.marked_bad = 0; /* not used... */ - mseg.blocks = buff->bytes / FT_SECTOR_SIZE; - mseg.data = buff->address; - /* If there are no data sectors we can skip this segment. - */ - if (mseg.blocks <= 3) { - TRACE_ABORT(0, ft_t_noise, "empty segment"); - } - read_bad = mseg.read_bad; - ft_history.crc_errors += count_ones(read_bad); - result = ftape_ecc_correct_data(&mseg); - if (read_bad != 0 || mseg.corrected != 0) { - TRACE(ft_t_noise, "crc error map: 0x%08lx", (unsigned long)read_bad); - TRACE(ft_t_noise, "corrected map: 0x%08lx", (unsigned long)mseg.corrected); - ft_history.corrected += count_ones(mseg.corrected); - } - if (result == ECC_CORRECTED || result == ECC_OK) { - if (result == ECC_CORRECTED) { - TRACE(ft_t_info, "ecc corrected segment: %d", buff->segment_id); - } - if(start < 0) { - start= 0; - } - if((start+size) > ((mseg.blocks - 3) * FT_SECTOR_SIZE)) { - size = (mseg.blocks - 3) * FT_SECTOR_SIZE - start; - } - if (size < 0) { - size= 0; - } - if(size > 0) { - memcpy(destination + start, mseg.data + start, size); - } - if ((read_bad ^ mseg.corrected) & mseg.corrected) { - /* sectors corrected without crc errors set */ - ft_history.crc_failures++; - } - TRACE_EXIT size; /* (mseg.blocks - 3) * FT_SECTOR_SIZE; */ - } else { - ft_history.ecc_failures++; - TRACE_ABORT(-EAGAIN, - ft_t_err, "ecc failure on segment %d", - buff->segment_id); - } - TRACE_EXIT 0; -} - -/* Read given segment into buffer at address. - */ -int ftape_read_segment_fraction(const int segment_id, - void *address, - const ft_read_mode_t read_mode, - const int start, - const int size) -{ - int result = 0; - int retry = 0; - int bytes_read = 0; - int read_done = 0; - TRACE_FUN(ft_t_flow); - - ft_history.used |= 1; - TRACE(ft_t_data_flow, "segment_id = %d", segment_id); - if (ft_driver_state != reading) { - TRACE(ft_t_noise, "calling ftape_abort_operation"); - TRACE_CATCH(ftape_abort_operation(),); - ftape_set_state(reading); - } - for(;;) { - buffer_struct *tail; - /* Allow escape from this loop on signal ! - */ - FT_SIGNAL_EXIT(_DONT_BLOCK); - /* Search all full buffers for the first matching the - * wanted segment. Clear other buffers on the fly. - */ - tail = ftape_get_buffer(ft_queue_tail); - while (!read_done && tail->status == done) { - /* Allow escape from this loop on signal ! - */ - FT_SIGNAL_EXIT(_DONT_BLOCK); - if (tail->segment_id == segment_id) { - /* If out buffer is already full, - * return its contents. - */ - TRACE(ft_t_flow, "found segment in cache: %d", - segment_id); - if (tail->deleted) { - /* Return a value that - * read_header_segment - * understands. As this - * should only occur when - * searching for the header - * segments it shouldn't be - * misinterpreted elsewhere. - */ - TRACE_EXIT 0; - } - result = correct_and_copy_fraction( - tail, - address, - start, - size); - TRACE(ft_t_flow, "segment contains (bytes): %d", - result); - if (result < 0) { - if (result != -EAGAIN) { - TRACE_EXIT result; - } - /* keep read_done == 0, will - * trigger - * ftape_abort_operation - * because reading wrong - * segment. - */ - TRACE(ft_t_err, "ecc failed, retry"); - ++retry; - } else { - read_done = 1; - bytes_read = result; - } - } else { - TRACE(ft_t_flow,"zapping segment in cache: %d", - tail->segment_id); - } - tail->status = waiting; - tail = ftape_next_buffer(ft_queue_tail); - } - if (!read_done && tail->status == reading) { - if (tail->segment_id == segment_id) { - switch(ftape_wait_segment(reading)) { - case 0: - break; - case -EINTR: - TRACE_ABORT(-EINTR, ft_t_warn, - "interrupted by " - "non-blockable signal"); - break; - default: - TRACE(ft_t_noise, - "wait_segment failed"); - ftape_abort_operation(); - ftape_set_state(reading); - break; - } - } else { - /* We're reading the wrong segment, - * stop runner. - */ - TRACE(ft_t_noise, "reading wrong segment"); - ftape_abort_operation(); - ftape_set_state(reading); - } - } - /* should runner stop ? - */ - if (ft_runner_status == aborting) { - buffer_struct *head = ftape_get_buffer(ft_queue_head); - switch(head->status) { - case error: - ft_history.defects += - count_ones(head->hard_error_map); - case reading: - head->status = waiting; - break; - default: - break; - } - TRACE_CATCH(ftape_dumb_stop(),); - } else { - /* If just passed last segment on tape: wait - * for BOT or EOT mark. Sets ft_runner_status to - * idle if at lEOT and successful - */ - TRACE_CATCH(ftape_handle_logical_eot(),); - } - /* If we got a segment: quit, or else retry up to limit. - * - * If segment to read is empty, do not start runner for it, - * but wait for next read call. - */ - if (read_done || - ftape_get_bad_sector_entry(segment_id) == EMPTY_SEGMENT ) { - /* bytes_read = 0; should still be zero */ - TRACE_EXIT bytes_read; - - } - if (retry > FT_RETRIES_ON_ECC_ERROR) { - ft_history.defects++; - TRACE_ABORT(-ENODATA, ft_t_err, - "too many retries on ecc failure"); - } - /* Now at least one buffer is empty ! - * Restart runner & tape if needed. - */ - TRACE(ft_t_any, "head: %d, tail: %d, ft_runner_status: %d", - ftape_buffer_id(ft_queue_head), - ftape_buffer_id(ft_queue_tail), - ft_runner_status); - TRACE(ft_t_any, "buffer[].status, [head]: %d, [tail]: %d", - ftape_get_buffer(ft_queue_head)->status, - ftape_get_buffer(ft_queue_tail)->status); - tail = ftape_get_buffer(ft_queue_tail); - if (tail->status == waiting) { - buffer_struct *head = ftape_get_buffer(ft_queue_head); - - ftape_setup_new_segment(head, segment_id, -1); - if (read_mode == FT_RD_SINGLE) { - /* disable read-ahead */ - head->next_segment = 0; - } - ftape_calc_next_cluster(head); - if (ft_runner_status == idle) { - result = ftape_start_tape(segment_id, - head->sector_offset); - if (result < 0) { - TRACE_ABORT(result, ft_t_err, "Error: " - "segment %d unreachable", - segment_id); - } - } - head->status = reading; - fdc_setup_read_write(head, FDC_READ); - } - } - /* not reached */ - TRACE_EXIT -EIO; -} - -int ftape_read_header_segment(__u8 *address) -{ - int result; - int header_segment; - int first_failed = 0; - int status; - TRACE_FUN(ft_t_flow); - - ft_used_header_segment = -1; - TRACE_CATCH(ftape_report_drive_status(&status),); - TRACE(ft_t_flow, "reading..."); - /* We're looking for the first header segment. - * A header segment cannot contain bad sectors, therefor at the - * tape start, segments with bad sectors are (according to QIC-40/80) - * written with deleted data marks and must be skipped. - */ - memset(address, '\0', (FT_SECTORS_PER_SEGMENT - 3) * FT_SECTOR_SIZE); - result = 0; -#define HEADER_SEGMENT_BOUNDARY 68 /* why not 42? */ - for (header_segment = 0; - header_segment < HEADER_SEGMENT_BOUNDARY && result == 0; - ++header_segment) { - /* Set no read-ahead, the isr will force read-ahead whenever - * it encounters deleted data ! - */ - result = ftape_read_segment(header_segment, - address, - FT_RD_SINGLE); - if (result < 0 && !first_failed) { - TRACE(ft_t_err, "header segment damaged, trying backup"); - first_failed = 1; - result = 0; /* force read of next (backup) segment */ - } - } - if (result < 0 || header_segment >= HEADER_SEGMENT_BOUNDARY) { - TRACE_ABORT(-EIO, ft_t_err, - "no readable header segment found"); - } - TRACE_CATCH(ftape_abort_operation(),); - ft_used_header_segment = header_segment; - result = ftape_decode_header_segment(address); - TRACE_EXIT result; -} - -int ftape_decode_header_segment(__u8 *address) -{ - unsigned int max_floppy_side; - unsigned int max_floppy_track; - unsigned int max_floppy_sector; - unsigned int new_tape_len; - TRACE_FUN(ft_t_flow); - - if (GET4(address, FT_SIGNATURE) == FT_D2G_MAGIC) { - /* Ditto 2GB header segment. They encrypt the bad sector map. - * We decrypt it and store them in normal format. - * I hope this is correct. - */ - int i; - TRACE(ft_t_warn, - "Found Ditto 2GB tape, " - "trying to decrypt bad sector map"); - for (i=256; i < 29 * FT_SECTOR_SIZE; i++) { - address[i] = ~(address[i] - (i&0xff)); - } - PUT4(address, 0,FT_HSEG_MAGIC); - } else if (GET4(address, FT_SIGNATURE) != FT_HSEG_MAGIC) { - TRACE_ABORT(-EIO, ft_t_err, - "wrong signature in header segment"); - } - ft_format_code = (ft_format_type) address[FT_FMT_CODE]; - if (ft_format_code != fmt_big) { - ft_header_segment_1 = GET2(address, FT_HSEG_1); - ft_header_segment_2 = GET2(address, FT_HSEG_2); - ft_first_data_segment = GET2(address, FT_FRST_SEG); - ft_last_data_segment = GET2(address, FT_LAST_SEG); - } else { - ft_header_segment_1 = GET4(address, FT_6_HSEG_1); - ft_header_segment_2 = GET4(address, FT_6_HSEG_2); - ft_first_data_segment = GET4(address, FT_6_FRST_SEG); - ft_last_data_segment = GET4(address, FT_6_LAST_SEG); - } - TRACE(ft_t_noise, "first data segment: %d", ft_first_data_segment); - TRACE(ft_t_noise, "last data segment: %d", ft_last_data_segment); - TRACE(ft_t_noise, "header segments are %d and %d", - ft_header_segment_1, ft_header_segment_2); - - /* Verify tape parameters... - * QIC-40/80 spec: tape_parameters: - * - * segments-per-track segments_per_track - * tracks-per-cartridge tracks_per_tape - * max-floppy-side (segments_per_track * - * tracks_per_tape - 1) / - * ftape_segments_per_head - * max-floppy-track ftape_segments_per_head / - * ftape_segments_per_cylinder - 1 - * max-floppy-sector ftape_segments_per_cylinder * - * FT_SECTORS_PER_SEGMENT - */ - ft_segments_per_track = GET2(address, FT_SPT); - ft_tracks_per_tape = address[FT_TPC]; - max_floppy_side = address[FT_FHM]; - max_floppy_track = address[FT_FTM]; - max_floppy_sector = address[FT_FSM]; - TRACE(ft_t_noise, "(fmt/spt/tpc/fhm/ftm/fsm) = %d/%d/%d/%d/%d/%d", - ft_format_code, ft_segments_per_track, ft_tracks_per_tape, - max_floppy_side, max_floppy_track, max_floppy_sector); - new_tape_len = ftape_tape_len; - switch (ft_format_code) { - case fmt_425ft: - new_tape_len = 425; - break; - case fmt_normal: - if (ftape_tape_len == 0) { /* otherwise 307 ft */ - new_tape_len = 205; - } - break; - case fmt_1100ft: - new_tape_len = 1100; - break; - case fmt_var:{ - int segments_per_1000_inch = 1; /* non-zero default for switch */ - switch (ft_qic_std) { - case QIC_TAPE_QIC40: - segments_per_1000_inch = 332; - break; - case QIC_TAPE_QIC80: - segments_per_1000_inch = 488; - break; - case QIC_TAPE_QIC3010: - segments_per_1000_inch = 730; - break; - case QIC_TAPE_QIC3020: - segments_per_1000_inch = 1430; - break; - } - new_tape_len = (1000 * ft_segments_per_track + - (segments_per_1000_inch - 1)) / segments_per_1000_inch; - break; - } - case fmt_big:{ - int segments_per_1000_inch = 1; /* non-zero default for switch */ - switch (ft_qic_std) { - case QIC_TAPE_QIC40: - segments_per_1000_inch = 332; - break; - case QIC_TAPE_QIC80: - segments_per_1000_inch = 488; - break; - case QIC_TAPE_QIC3010: - segments_per_1000_inch = 730; - break; - case QIC_TAPE_QIC3020: - segments_per_1000_inch = 1430; - break; - default: - TRACE_ABORT(-EIO, ft_t_bug, - "%x QIC-standard with fmt-code %d, please report", - ft_qic_std, ft_format_code); - } - new_tape_len = ((1000 * ft_segments_per_track + - (segments_per_1000_inch - 1)) / - segments_per_1000_inch); - break; - } - default: - TRACE_ABORT(-EIO, ft_t_err, - "unknown tape format, please report !"); - } - if (new_tape_len != ftape_tape_len) { - ftape_tape_len = new_tape_len; - TRACE(ft_t_info, "calculated tape length is %d ft", - ftape_tape_len); - ftape_calc_timeouts(ft_qic_std, ft_data_rate, ftape_tape_len); - } - if (ft_segments_per_track == 0 && ft_tracks_per_tape == 0 && - max_floppy_side == 0 && max_floppy_track == 0 && - max_floppy_sector == 0) { - /* QIC-40 Rev E and earlier has no values in the header. - */ - ft_segments_per_track = 68; - ft_tracks_per_tape = 20; - max_floppy_side = 1; - max_floppy_track = 169; - max_floppy_sector = 128; - } - /* This test will compensate for the wrong parameter on tapes - * formatted by Conner software. - */ - if (ft_segments_per_track == 150 && - ft_tracks_per_tape == 28 && - max_floppy_side == 7 && - max_floppy_track == 149 && - max_floppy_sector == 128) { -TRACE(ft_t_info, "the famous CONNER bug: max_floppy_side off by one !"); - max_floppy_side = 6; - } - /* These tests will compensate for the wrong parameter on tapes - * formatted by ComByte Windows software. - * - * First, for 205 foot tapes - */ - if (ft_segments_per_track == 100 && - ft_tracks_per_tape == 28 && - max_floppy_side == 9 && - max_floppy_track == 149 && - max_floppy_sector == 128) { -TRACE(ft_t_info, "the ComByte bug: max_floppy_side incorrect!"); - max_floppy_side = 4; - } - /* Next, for 307 foot tapes. */ - if (ft_segments_per_track == 150 && - ft_tracks_per_tape == 28 && - max_floppy_side == 9 && - max_floppy_track == 149 && - max_floppy_sector == 128) { -TRACE(ft_t_info, "the ComByte bug: max_floppy_side incorrect!"); - max_floppy_side = 6; - } - /* This test will compensate for the wrong parameter on tapes - * formatted by Colorado Windows software. - */ - if (ft_segments_per_track == 150 && - ft_tracks_per_tape == 28 && - max_floppy_side == 6 && - max_floppy_track == 150 && - max_floppy_sector == 128) { -TRACE(ft_t_info, "the famous Colorado bug: max_floppy_track off by one !"); - max_floppy_track = 149; - } - ftape_segments_per_head = ((max_floppy_sector/FT_SECTORS_PER_SEGMENT) * - (max_floppy_track + 1)); - /* This test will compensate for some bug reported by Dima - * Brodsky. Seems to be a Colorado bug, either. (freebee - * Imation tape shipped together with Colorado T3000 - */ - if ((ft_format_code == fmt_var || ft_format_code == fmt_big) && - ft_tracks_per_tape == 50 && - max_floppy_side == 54 && - max_floppy_track == 255 && - max_floppy_sector == 128) { -TRACE(ft_t_info, "the famous ??? bug: max_floppy_track off by one !"); - max_floppy_track = 254; - } - /* - * Verify drive_configuration with tape parameters - */ - if (ftape_segments_per_head == 0 || ftape_segments_per_cylinder == 0 || - ((ft_segments_per_track * ft_tracks_per_tape - 1) / ftape_segments_per_head - != max_floppy_side) || - (ftape_segments_per_head / ftape_segments_per_cylinder - 1 != max_floppy_track) || - (ftape_segments_per_cylinder * FT_SECTORS_PER_SEGMENT != max_floppy_sector) -#ifdef TESTING - || ((ft_format_code == fmt_var || ft_format_code == fmt_big) && - (max_floppy_track != 254 || max_floppy_sector != 128)) -#endif - ) { - char segperheadz = ftape_segments_per_head ? ' ' : '?'; - char segpercylz = ftape_segments_per_cylinder ? ' ' : '?'; - TRACE(ft_t_err,"Tape parameters inconsistency, please report"); - TRACE(ft_t_err, "reported = %d/%d/%d/%d/%d/%d", - ft_format_code, - ft_segments_per_track, - ft_tracks_per_tape, - max_floppy_side, - max_floppy_track, - max_floppy_sector); - TRACE(ft_t_err, "required = %d/%d/%d/%d%c/%d%c/%d", - ft_format_code, - ft_segments_per_track, - ft_tracks_per_tape, - ftape_segments_per_head ? - ((ft_segments_per_track * ft_tracks_per_tape -1) / - ftape_segments_per_head ) : - (ft_segments_per_track * ft_tracks_per_tape -1), - segperheadz, - ftape_segments_per_cylinder ? - (ftape_segments_per_head / - ftape_segments_per_cylinder - 1 ) : - ftape_segments_per_head - 1, - segpercylz, - (ftape_segments_per_cylinder * FT_SECTORS_PER_SEGMENT)); - TRACE_EXIT -EIO; - } - ftape_extract_bad_sector_map(address); - TRACE_EXIT 0; -} diff --git a/drivers/char/ftape/lowlevel/ftape-read.h b/drivers/char/ftape/lowlevel/ftape-read.h deleted file mode 100644 index 069f99f2a98..00000000000 --- a/drivers/char/ftape/lowlevel/ftape-read.h +++ /dev/null @@ -1,51 +0,0 @@ -#ifndef _FTAPE_READ_H -#define _FTAPE_READ_H - -/* - * Copyright (C) 1994-1996 Bas Laarhoven, - * (C) 1996-1997 Claus-Justus Heine. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; see the file COPYING. If not, write to - the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - - * - * $Source: /homes/cvs/ftape-stacked/ftape/lowlevel/ftape-read.h,v $ - * $Revision: 1.2 $ - * $Date: 1997/10/05 19:18:22 $ - * - * This file contains the definitions for the read functions - * for the QIC-117 floppy-tape driver for Linux. - * - */ - -/* ftape-read.c defined global functions. - */ -typedef enum { - FT_RD_SINGLE = 0, - FT_RD_AHEAD = 1, -} ft_read_mode_t; - -extern int ftape_read_header_segment(__u8 *address); -extern int ftape_decode_header_segment(__u8 *address); -extern int ftape_read_segment_fraction(const int segment, - void *address, - const ft_read_mode_t read_mode, - const int start, - const int size); -#define ftape_read_segment(segment, address, read_mode) \ - ftape_read_segment_fraction(segment, address, read_mode, \ - 0, FT_SEGMENT_SIZE) -extern void ftape_zap_read_buffers(void); - -#endif /* _FTAPE_READ_H */ diff --git a/drivers/char/ftape/lowlevel/ftape-rw.c b/drivers/char/ftape/lowlevel/ftape-rw.c deleted file mode 100644 index c0d6dc2cbfd..00000000000 --- a/drivers/char/ftape/lowlevel/ftape-rw.c +++ /dev/null @@ -1,1092 +0,0 @@ -/* - * Copyright (C) 1993-1996 Bas Laarhoven, - * (C) 1996-1997 Claus-Justus Heine. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; see the file COPYING. If not, write to - the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - - * - * $Source: /homes/cvs/ftape-stacked/ftape/lowlevel/ftape-rw.c,v $ - * $Revision: 1.7 $ - * $Date: 1997/10/28 14:26:49 $ - * - * This file contains some common code for the segment read and - * segment write routines for the QIC-117 floppy-tape driver for - * Linux. - */ - -#include <linux/string.h> -#include <linux/errno.h> - -#include <linux/ftape.h> -#include <linux/qic117.h> -#include "../lowlevel/ftape-tracing.h" -#include "../lowlevel/ftape-rw.h" -#include "../lowlevel/fdc-io.h" -#include "../lowlevel/ftape-init.h" -#include "../lowlevel/ftape-io.h" -#include "../lowlevel/ftape-ctl.h" -#include "../lowlevel/ftape-read.h" -#include "../lowlevel/ftape-ecc.h" -#include "../lowlevel/ftape-bsm.h" - -/* Global vars. - */ -int ft_nr_buffers; -buffer_struct *ft_buffer[FT_MAX_NR_BUFFERS]; -static volatile int ft_head; -static volatile int ft_tail; /* not volatile but need same type as head */ -int fdc_setup_error; -location_record ft_location = {-1, 0}; -volatile int ftape_tape_running; - -/* Local vars. - */ -static int overrun_count_offset; -static int inhibit_correction; - -/* maxmimal allowed overshoot when fast seeking - */ -#define OVERSHOOT_LIMIT 10 - -/* Increment cyclic buffer nr. - */ -buffer_struct *ftape_next_buffer(ft_buffer_queue_t pos) -{ - switch (pos) { - case ft_queue_head: - if (++ft_head >= ft_nr_buffers) { - ft_head = 0; - } - return ft_buffer[ft_head]; - case ft_queue_tail: - if (++ft_tail >= ft_nr_buffers) { - ft_tail = 0; - } - return ft_buffer[ft_tail]; - default: - return NULL; - } -} -int ftape_buffer_id(ft_buffer_queue_t pos) -{ - switch(pos) { - case ft_queue_head: return ft_head; - case ft_queue_tail: return ft_tail; - default: return -1; - } -} -buffer_struct *ftape_get_buffer(ft_buffer_queue_t pos) -{ - switch(pos) { - case ft_queue_head: return ft_buffer[ft_head]; - case ft_queue_tail: return ft_buffer[ft_tail]; - default: return NULL; - } -} -void ftape_reset_buffer(void) -{ - ft_head = ft_tail = 0; -} - -buffer_state_enum ftape_set_state(buffer_state_enum new_state) -{ - buffer_state_enum old_state = ft_driver_state; - - ft_driver_state = new_state; - return old_state; -} -/* Calculate Floppy Disk Controller and DMA parameters for a segment. - * head: selects buffer struct in array. - * offset: number of physical sectors to skip (including bad ones). - * count: number of physical sectors to handle (including bad ones). - */ -static int setup_segment(buffer_struct * buff, - int segment_id, - unsigned int sector_offset, - unsigned int sector_count, - int retry) -{ - SectorMap offset_mask; - SectorMap mask; - TRACE_FUN(ft_t_any); - - buff->segment_id = segment_id; - buff->sector_offset = sector_offset; - buff->remaining = sector_count; - buff->head = segment_id / ftape_segments_per_head; - buff->cyl = (segment_id % ftape_segments_per_head) / ftape_segments_per_cylinder; - buff->sect = (segment_id % ftape_segments_per_cylinder) * FT_SECTORS_PER_SEGMENT + 1; - buff->deleted = 0; - offset_mask = (1 << buff->sector_offset) - 1; - mask = ftape_get_bad_sector_entry(segment_id) & offset_mask; - while (mask) { - if (mask & 1) { - offset_mask >>= 1; /* don't count bad sector */ - } - mask >>= 1; - } - buff->data_offset = count_ones(offset_mask); /* good sectors to skip */ - buff->ptr = buff->address + buff->data_offset * FT_SECTOR_SIZE; - TRACE(ft_t_flow, "data offset = %d sectors", buff->data_offset); - if (retry) { - buff->soft_error_map &= offset_mask; /* keep skipped part */ - } else { - buff->hard_error_map = buff->soft_error_map = 0; - } - buff->bad_sector_map = ftape_get_bad_sector_entry(buff->segment_id); - if (buff->bad_sector_map != 0) { - TRACE(ft_t_noise, "segment: %d, bad sector map: %08lx", - buff->segment_id, (long)buff->bad_sector_map); - } else { - TRACE(ft_t_flow, "segment: %d", buff->segment_id); - } - if (buff->sector_offset > 0) { - buff->bad_sector_map >>= buff->sector_offset; - } - if (buff->sector_offset != 0 || buff->remaining != FT_SECTORS_PER_SEGMENT) { - TRACE(ft_t_flow, "sector offset = %d, count = %d", - buff->sector_offset, buff->remaining); - } - /* Segments with 3 or less sectors are not written with valid - * data because there is no space left for the ecc. The - * data written is whatever happens to be in the buffer. - * Reading such a segment will return a zero byte-count. - * To allow us to read/write segments with all bad sectors - * we fake one readable sector in the segment. This - * prevents having to handle these segments in a very - * special way. It is not important if the reading of this - * bad sector fails or not (the data is ignored). It is - * only read to keep the driver running. - * - * The QIC-40/80 spec. has no information on how to handle - * this case, so this is my interpretation. - */ - if (buff->bad_sector_map == EMPTY_SEGMENT) { - TRACE(ft_t_flow, "empty segment %d, fake first sector good", - buff->segment_id); - if (buff->ptr != buff->address) { - TRACE(ft_t_bug, "This is a bug: %p/%p", - buff->ptr, buff->address); - } - buff->bad_sector_map = FAKE_SEGMENT; - } - fdc_setup_error = 0; - buff->next_segment = segment_id + 1; - TRACE_EXIT 0; -} - -/* Calculate Floppy Disk Controller and DMA parameters for a new segment. - */ -int ftape_setup_new_segment(buffer_struct * buff, int segment_id, int skip) -{ - int result = 0; - static int old_segment_id = -1; - static buffer_state_enum old_ft_driver_state = idle; - int retry = 0; - unsigned offset = 0; - int count = FT_SECTORS_PER_SEGMENT; - TRACE_FUN(ft_t_flow); - - TRACE(ft_t_flow, "%s segment %d (old = %d)", - (ft_driver_state == reading || ft_driver_state == verifying) - ? "reading" : "writing", - segment_id, old_segment_id); - if (ft_driver_state != old_ft_driver_state) { /* when verifying */ - old_segment_id = -1; - old_ft_driver_state = ft_driver_state; - } - if (segment_id == old_segment_id) { - ++buff->retry; - ++ft_history.retries; - TRACE(ft_t_flow, "setting up for retry nr %d", buff->retry); - retry = 1; - if (skip && buff->skip > 0) { /* allow skip on retry */ - offset = buff->skip; - count -= offset; - TRACE(ft_t_flow, "skipping %d sectors", offset); - } - } else { - buff->retry = 0; - buff->skip = 0; - old_segment_id = segment_id; - } - result = setup_segment(buff, segment_id, offset, count, retry); - TRACE_EXIT result; -} - -/* Determine size of next cluster of good sectors. - */ -int ftape_calc_next_cluster(buffer_struct * buff) -{ - /* Skip bad sectors. - */ - while (buff->remaining > 0 && (buff->bad_sector_map & 1) != 0) { - buff->bad_sector_map >>= 1; - ++buff->sector_offset; - --buff->remaining; - } - /* Find next cluster of good sectors - */ - if (buff->bad_sector_map == 0) { /* speed up */ - buff->sector_count = buff->remaining; - } else { - SectorMap map = buff->bad_sector_map; - - buff->sector_count = 0; - while (buff->sector_count < buff->remaining && (map & 1) == 0) { - ++buff->sector_count; - map >>= 1; - } - } - return buff->sector_count; -} - -/* if just passed the last segment on a track, wait for BOT - * or EOT mark. - */ -int ftape_handle_logical_eot(void) -{ - TRACE_FUN(ft_t_flow); - - if (ft_runner_status == logical_eot) { - int status; - - TRACE(ft_t_noise, "tape at logical EOT"); - TRACE_CATCH(ftape_ready_wait(ftape_timeout.seek, &status),); - if ((status & (QIC_STATUS_AT_BOT | QIC_STATUS_AT_EOT)) == 0) { - TRACE_ABORT(-EIO, ft_t_err, "eot/bot not reached"); - } - ft_runner_status = end_of_tape; - } - if (ft_runner_status == end_of_tape) { - TRACE(ft_t_noise, "runner stopped because of logical EOT"); - ft_runner_status = idle; - } - TRACE_EXIT 0; -} - -static int check_bot_eot(int status) -{ - TRACE_FUN(ft_t_flow); - - if (status & (QIC_STATUS_AT_BOT | QIC_STATUS_AT_EOT)) { - ft_location.bot = ((ft_location.track & 1) == 0 ? - (status & QIC_STATUS_AT_BOT) != 0: - (status & QIC_STATUS_AT_EOT) != 0); - ft_location.eot = !ft_location.bot; - ft_location.segment = (ft_location.track + - (ft_location.bot ? 0 : 1)) * ft_segments_per_track - 1; - ft_location.sector = -1; - ft_location.known = 1; - TRACE(ft_t_flow, "tape at logical %s", - ft_location.bot ? "bot" : "eot"); - TRACE(ft_t_flow, "segment = %d", ft_location.segment); - } else { - ft_location.known = 0; - } - TRACE_EXIT ft_location.known; -} - -/* Read Id of first sector passing tape head. - */ -static int ftape_read_id(void) -{ - int status; - __u8 out[2]; - TRACE_FUN(ft_t_any); - - /* Assume tape is running on entry, be able to handle - * situation where it stopped or is stopping. - */ - ft_location.known = 0; /* default is location not known */ - out[0] = FDC_READID; - out[1] = ft_drive_sel; - TRACE_CATCH(fdc_command(out, 2),); - switch (fdc_interrupt_wait(20 * FT_SECOND)) { - case 0: - if (fdc_sect == 0) { - if (ftape_report_drive_status(&status) >= 0 && - (status & QIC_STATUS_READY)) { - ftape_tape_running = 0; - TRACE(ft_t_flow, "tape has stopped"); - check_bot_eot(status); - } - } else { - ft_location.known = 1; - ft_location.segment = (ftape_segments_per_head - * fdc_head - + ftape_segments_per_cylinder - * fdc_cyl - + (fdc_sect - 1) - / FT_SECTORS_PER_SEGMENT); - ft_location.sector = ((fdc_sect - 1) - % FT_SECTORS_PER_SEGMENT); - ft_location.eot = ft_location.bot = 0; - } - break; - case -ETIME: - /* Didn't find id on tape, must be near end: Wait - * until stopped. - */ - if (ftape_ready_wait(FT_FOREVER, &status) >= 0) { - ftape_tape_running = 0; - TRACE(ft_t_flow, "tape has stopped"); - check_bot_eot(status); - } - break; - default: - /* Interrupted or otherwise failing - * fdc_interrupt_wait() - */ - TRACE(ft_t_err, "fdc_interrupt_wait failed"); - break; - } - if (!ft_location.known) { - TRACE_ABORT(-EIO, ft_t_flow, "no id found"); - } - if (ft_location.sector == 0) { - TRACE(ft_t_flow, "passing segment %d/%d", - ft_location.segment, ft_location.sector); - } else { - TRACE(ft_t_fdc_dma, "passing segment %d/%d", - ft_location.segment, ft_location.sector); - } - TRACE_EXIT 0; -} - -static int logical_forward(void) -{ - ftape_tape_running = 1; - return ftape_command(QIC_LOGICAL_FORWARD); -} - -int ftape_stop_tape(int *pstatus) -{ - int retry = 0; - int result; - TRACE_FUN(ft_t_flow); - - do { - result = ftape_command_wait(QIC_STOP_TAPE, - ftape_timeout.stop, pstatus); - if (result == 0) { - if ((*pstatus & QIC_STATUS_READY) == 0) { - result = -EIO; - } else { - ftape_tape_running = 0; - } - } - } while (result < 0 && ++retry <= 3); - if (result < 0) { - TRACE(ft_t_err, "failed ! (fatal)"); - } - TRACE_EXIT result; -} - -int ftape_dumb_stop(void) -{ - int result; - int status; - TRACE_FUN(ft_t_flow); - - /* Abort current fdc operation if it's busy (probably read - * or write operation pending) with a reset. - */ - if (fdc_ready_wait(100 /* usec */) < 0) { - TRACE(ft_t_noise, "aborting fdc operation"); - fdc_reset(); - } - /* Reading id's after the last segment on a track may fail - * but eventually the drive will become ready (logical eot). - */ - result = ftape_report_drive_status(&status); - ft_location.known = 0; - do { - if (result == 0 && status & QIC_STATUS_READY) { - /* Tape is not running any more. - */ - TRACE(ft_t_noise, "tape already halted"); - check_bot_eot(status); - ftape_tape_running = 0; - } else if (ftape_tape_running) { - /* Tape is (was) still moving. - */ -#ifdef TESTING - ftape_read_id(); -#endif - result = ftape_stop_tape(&status); - } else { - /* Tape not yet ready but stopped. - */ - result = ftape_ready_wait(ftape_timeout.pause,&status); - } - } while (ftape_tape_running - && !(sigtestsetmask(¤t->pending.signal, _NEVER_BLOCK))); -#ifndef TESTING - ft_location.known = 0; -#endif - if (ft_runner_status == aborting || ft_runner_status == do_abort) { - ft_runner_status = idle; - } - TRACE_EXIT result; -} - -/* Wait until runner has finished tail buffer. - * - */ -int ftape_wait_segment(buffer_state_enum state) -{ - int status; - int result = 0; - TRACE_FUN(ft_t_flow); - - while (ft_buffer[ft_tail]->status == state) { - TRACE(ft_t_flow, "state: %d", ft_buffer[ft_tail]->status); - /* First buffer still being worked on, wait up to timeout. - * - * Note: we check two times for being killed. 50 - * seconds are quite long. Note that - * fdc_interrupt_wait() is not killable by any - * means. ftape_read_segment() wants us to return - * -EINTR in case of a signal. - */ - FT_SIGNAL_EXIT(_DONT_BLOCK); - result = fdc_interrupt_wait(50 * FT_SECOND); - FT_SIGNAL_EXIT(_DONT_BLOCK); - if (result < 0) { - TRACE_ABORT(result, - ft_t_err, "fdc_interrupt_wait failed"); - } - if (fdc_setup_error) { - /* recover... FIXME */ - TRACE_ABORT(-EIO, ft_t_err, "setup error"); - } - } - if (ft_buffer[ft_tail]->status != error) { - TRACE_EXIT 0; - } - TRACE_CATCH(ftape_report_drive_status(&status),); - TRACE(ft_t_noise, "ftape_report_drive_status: 0x%02x", status); - if ((status & QIC_STATUS_READY) && - (status & QIC_STATUS_ERROR)) { - unsigned int error; - qic117_cmd_t command; - - /* Report and clear error state. - * In case the drive can't operate at the selected - * rate, select the next lower data rate. - */ - ftape_report_error(&error, &command, 1); - if (error == 31 && command == QIC_LOGICAL_FORWARD) { - /* drive does not accept this data rate */ - if (ft_data_rate > 250) { - TRACE(ft_t_info, - "Probable data rate conflict"); - TRACE(ft_t_info, - "Lowering data rate to %d Kbps", - ft_data_rate / 2); - ftape_half_data_rate(); - if (ft_buffer[ft_tail]->retry > 0) { - /* give it a chance */ - --ft_buffer[ft_tail]->retry; - } - } else { - /* no rate is accepted... */ - TRACE(ft_t_err, "We're dead :("); - } - } else { - TRACE(ft_t_err, "Unknown error"); - } - TRACE_EXIT -EIO; /* g.p. error */ - } - TRACE_EXIT 0; -} - -/* forward */ static int seek_forward(int segment_id, int fast); - -static int fast_seek(int count, int reverse) -{ - int result = 0; - int status; - TRACE_FUN(ft_t_flow); - - if (count > 0) { - /* If positioned at begin or end of tape, fast seeking needs - * special treatment. - * Starting from logical bot needs a (slow) seek to the first - * segment before the high speed seek. Most drives do this - * automatically but some older don't, so we treat them - * all the same. - * Starting from logical eot is even more difficult because - * we cannot (slow) reverse seek to the last segment. - * TO BE IMPLEMENTED. - */ - inhibit_correction = 0; - if (ft_location.known && - ((ft_location.bot && !reverse) || - (ft_location.eot && reverse))) { - if (!reverse) { - /* (slow) skip to first segment on a track - */ - seek_forward(ft_location.track * ft_segments_per_track, 0); - --count; - } else { - /* When seeking backwards from - * end-of-tape the number of erased - * gaps found seems to be higher than - * expected. Therefor the drive must - * skip some more segments than - * calculated, but we don't know how - * many. Thus we will prevent the - * re-calculation of offset and - * overshoot when seeking backwards. - */ - inhibit_correction = 1; - count += 3; /* best guess */ - } - } - } else { - TRACE(ft_t_flow, "warning: zero or negative count: %d", count); - } - if (count > 0) { - int i; - int nibbles = count > 255 ? 3 : 2; - - if (count > 4095) { - TRACE(ft_t_noise, "skipping clipped at 4095 segment"); - count = 4095; - } - /* Issue this tape command first. */ - if (!reverse) { - TRACE(ft_t_noise, "skipping %d segment(s)", count); - result = ftape_command(nibbles == 3 ? - QIC_SKIP_EXTENDED_FORWARD : QIC_SKIP_FORWARD); - } else { - TRACE(ft_t_noise, "backing up %d segment(s)", count); - result = ftape_command(nibbles == 3 ? - QIC_SKIP_EXTENDED_REVERSE : QIC_SKIP_REVERSE); - } - if (result < 0) { - TRACE(ft_t_noise, "Skip command failed"); - } else { - --count; /* 0 means one gap etc. */ - for (i = 0; i < nibbles; ++i) { - if (result >= 0) { - result = ftape_parameter(count & 15); - count /= 16; - } - } - result = ftape_ready_wait(ftape_timeout.rewind, &status); - if (result >= 0) { - ftape_tape_running = 0; - } - } - } - TRACE_EXIT result; -} - -static int validate(int id) -{ - /* Check to see if position found is off-track as reported - * once. Because all tracks in one direction lie next to - * each other, if off-track the error will be approximately - * 2 * ft_segments_per_track. - */ - if (ft_location.track == -1) { - return 1; /* unforseen situation, don't generate error */ - } else { - /* Use margin of ft_segments_per_track on both sides - * because ftape needs some margin and the error we're - * looking for is much larger ! - */ - int lo = (ft_location.track - 1) * ft_segments_per_track; - int hi = (ft_location.track + 2) * ft_segments_per_track; - - return (id >= lo && id < hi); - } -} - -static int seek_forward(int segment_id, int fast) -{ - int failures = 0; - int count; - static int margin = 1; /* fixed: stop this before target */ - static int overshoot = 1; - static int min_count = 8; - int expected = -1; - int target = segment_id - margin; - int fast_seeking; - int prev_segment = ft_location.segment; - TRACE_FUN(ft_t_flow); - - if (!ft_location.known) { - TRACE_ABORT(-EIO, ft_t_err, - "fatal: cannot seek from unknown location"); - } - if (!validate(segment_id)) { - ftape_sleep(1 * FT_SECOND); - ft_failure = 1; - TRACE_ABORT(-EIO, ft_t_err, - "fatal: head off track (bad hardware?)"); - } - TRACE(ft_t_noise, "from %d/%d to %d/0 - %d", - ft_location.segment, ft_location.sector,segment_id,margin); - count = target - ft_location.segment - overshoot; - fast_seeking = (fast && - count > (min_count + (ft_location.bot ? 1 : 0))); - if (fast_seeking) { - TRACE(ft_t_noise, "fast skipping %d segments", count); - expected = segment_id - margin; - fast_seek(count, 0); - } - if (!ftape_tape_running) { - logical_forward(); - } - while (ft_location.segment < segment_id) { - /* This requires at least one sector in a (bad) segment to - * have a valid and readable sector id ! - * It looks like this is not guaranteed, so we must try - * to find a way to skip an EMPTY_SEGMENT. !!! FIXME !!! - */ - if (ftape_read_id() < 0 || !ft_location.known || - sigtestsetmask(¤t->pending.signal, _DONT_BLOCK)) { - ft_location.known = 0; - if (!ftape_tape_running || - ++failures > FT_SECTORS_PER_SEGMENT) { - TRACE_ABORT(-EIO, ft_t_err, - "read_id failed completely"); - } - FT_SIGNAL_EXIT(_DONT_BLOCK); - TRACE(ft_t_flow, "read_id failed, retry (%d)", - failures); - continue; - } - if (fast_seeking) { - TRACE(ft_t_noise, "ended at %d/%d (%d,%d)", - ft_location.segment, ft_location.sector, - overshoot, inhibit_correction); - if (!inhibit_correction && - (ft_location.segment < expected || - ft_location.segment > expected + margin)) { - int error = ft_location.segment - expected; - TRACE(ft_t_noise, - "adjusting overshoot from %d to %d", - overshoot, overshoot + error); - overshoot += error; - /* All overshoots have the same - * direction, so it should never - * become negative, but who knows. - */ - if (overshoot < -5 || - overshoot > OVERSHOOT_LIMIT) { - if (overshoot < 0) { - /* keep sane value */ - overshoot = -5; - } else { - /* keep sane value */ - overshoot = OVERSHOOT_LIMIT; - } - TRACE(ft_t_noise, - "clipped overshoot to %d", - overshoot); - } - } - fast_seeking = 0; - } - if (ft_location.known) { - if (ft_location.segment > prev_segment + 1) { - TRACE(ft_t_noise, - "missed segment %d while skipping", - prev_segment + 1); - } - prev_segment = ft_location.segment; - } - } - if (ft_location.segment > segment_id) { - TRACE_ABORT(-EIO, - ft_t_noise, "failed: skip ended at segment %d/%d", - ft_location.segment, ft_location.sector); - } - TRACE_EXIT 0; -} - -static int skip_reverse(int segment_id, int *pstatus) -{ - int failures = 0; - static int overshoot = 1; - static int min_rewind = 2; /* 1 + overshoot */ - static const int margin = 1; /* stop this before target */ - int expected = 0; - int count = 1; - int short_seek; - int target = segment_id - margin; - TRACE_FUN(ft_t_flow); - - if (ft_location.known && !validate(segment_id)) { - ftape_sleep(1 * FT_SECOND); - ft_failure = 1; - TRACE_ABORT(-EIO, ft_t_err, - "fatal: head off track (bad hardware?)"); - } - do { - if (!ft_location.known) { - TRACE(ft_t_warn, "warning: location not known"); - } - TRACE(ft_t_noise, "from %d/%d to %d/0 - %d", - ft_location.segment, ft_location.sector, - segment_id, margin); - /* min_rewind == 1 + overshoot_when_doing_minimum_rewind - * overshoot == overshoot_when_doing_larger_rewind - * Initially min_rewind == 1 + overshoot, optimization - * of both values will be done separately. - * overshoot and min_rewind can be negative as both are - * sums of three components: - * any_overshoot == rewind_overshoot - - * stop_overshoot - - * start_overshoot - */ - if (ft_location.segment - target - (min_rewind - 1) < 1) { - short_seek = 1; - } else { - count = ft_location.segment - target - overshoot; - short_seek = (count < 1); - } - if (short_seek) { - count = 1; /* do shortest rewind */ - expected = ft_location.segment - min_rewind; - if (expected/ft_segments_per_track != ft_location.track) { - expected = (ft_location.track * - ft_segments_per_track); - } - } else { - expected = target; - } - fast_seek(count, 1); - logical_forward(); - if (ftape_read_id() < 0 || !ft_location.known || - (sigtestsetmask(¤t->pending.signal, _DONT_BLOCK))) { - if ((!ftape_tape_running && !ft_location.known) || - ++failures > FT_SECTORS_PER_SEGMENT) { - TRACE_ABORT(-EIO, ft_t_err, - "read_id failed completely"); - } - FT_SIGNAL_EXIT(_DONT_BLOCK); - TRACE_CATCH(ftape_report_drive_status(pstatus),); - TRACE(ft_t_noise, "ftape_read_id failed, retry (%d)", - failures); - continue; - } - TRACE(ft_t_noise, "ended at %d/%d (%d,%d,%d)", - ft_location.segment, ft_location.sector, - min_rewind, overshoot, inhibit_correction); - if (!inhibit_correction && - (ft_location.segment < expected || - ft_location.segment > expected + margin)) { - int error = expected - ft_location.segment; - if (short_seek) { - TRACE(ft_t_noise, - "adjusting min_rewind from %d to %d", - min_rewind, min_rewind + error); - min_rewind += error; - if (min_rewind < -5) { - /* is this right ? FIXME ! */ - /* keep sane value */ - min_rewind = -5; - TRACE(ft_t_noise, - "clipped min_rewind to %d", - min_rewind); - } - } else { - TRACE(ft_t_noise, - "adjusting overshoot from %d to %d", - overshoot, overshoot + error); - overshoot += error; - if (overshoot < -5 || - overshoot > OVERSHOOT_LIMIT) { - if (overshoot < 0) { - /* keep sane value */ - overshoot = -5; - } else { - /* keep sane value */ - overshoot = OVERSHOOT_LIMIT; - } - TRACE(ft_t_noise, - "clipped overshoot to %d", - overshoot); - } - } - } - } while (ft_location.segment > segment_id); - if (ft_location.known) { - TRACE(ft_t_noise, "current location: %d/%d", - ft_location.segment, ft_location.sector); - } - TRACE_EXIT 0; -} - -static int determine_position(void) -{ - int retry = 0; - int status; - int result; - TRACE_FUN(ft_t_flow); - - if (!ftape_tape_running) { - /* This should only happen if tape is stopped by isr. - */ - TRACE(ft_t_flow, "waiting for tape stop"); - if (ftape_ready_wait(ftape_timeout.pause, &status) < 0) { - TRACE(ft_t_flow, "drive still running (fatal)"); - ftape_tape_running = 1; /* ? */ - } - } else { - ftape_report_drive_status(&status); - } - if (status & QIC_STATUS_READY) { - /* Drive must be ready to check error state ! - */ - TRACE(ft_t_flow, "drive is ready"); - if (status & QIC_STATUS_ERROR) { - unsigned int error; - qic117_cmd_t command; - - /* Report and clear error state, try to continue. - */ - TRACE(ft_t_flow, "error status set"); - ftape_report_error(&error, &command, 1); - ftape_ready_wait(ftape_timeout.reset, &status); - ftape_tape_running = 0; /* ? */ - } - if (check_bot_eot(status)) { - if (ft_location.bot) { - if ((status & QIC_STATUS_READY) == 0) { - /* tape moving away from - * bot/eot, let's see if we - * can catch up with the first - * segment on this track. - */ - } else { - TRACE(ft_t_flow, - "start tape from logical bot"); - logical_forward(); /* start moving */ - } - } else { - if ((status & QIC_STATUS_READY) == 0) { - TRACE(ft_t_noise, "waiting for logical end of track"); - result = ftape_ready_wait(ftape_timeout.reset, &status); - /* error handling needed ? */ - } else { - TRACE(ft_t_noise, - "tape at logical end of track"); - } - } - } else { - TRACE(ft_t_flow, "start tape"); - logical_forward(); /* start moving */ - ft_location.known = 0; /* not cleared by logical forward ! */ - } - } - /* tape should be moving now, start reading id's - */ - while (!ft_location.known && - retry++ < FT_SECTORS_PER_SEGMENT && - (result = ftape_read_id()) < 0) { - - TRACE(ft_t_flow, "location unknown"); - - /* exit on signal - */ - FT_SIGNAL_EXIT(_DONT_BLOCK); - - /* read-id somehow failed, tape may - * have reached end or some other - * error happened. - */ - TRACE(ft_t_flow, "read-id failed"); - TRACE_CATCH(ftape_report_drive_status(&status),); - TRACE(ft_t_err, "ftape_report_drive_status: 0x%02x", status); - if (status & QIC_STATUS_READY) { - ftape_tape_running = 0; - TRACE(ft_t_noise, "tape stopped for unknown reason! " - "status = 0x%02x", status); - if (status & QIC_STATUS_ERROR || - !check_bot_eot(status)) { - /* oops, tape stopped but not at end! - */ - TRACE_EXIT -EIO; - } - } - } - TRACE(ft_t_flow, - "tape is positioned at segment %d", ft_location.segment); - TRACE_EXIT ft_location.known ? 0 : -EIO; -} - -/* Get the tape running and position it just before the - * requested segment. - * Seek tape-track and reposition as needed. - */ -int ftape_start_tape(int segment_id, int sector_offset) -{ - int track = segment_id / ft_segments_per_track; - int result = -EIO; - int status; - static int last_segment = -1; - static int bad_bus_timing = 0; - /* number of segments passing the head between starting the tape - * and being able to access the first sector. - */ - static int start_offset = 1; - int retry; - TRACE_FUN(ft_t_flow); - - /* If sector_offset > 0, seek into wanted segment instead of - * into previous. - * This allows error recovery if a part of the segment is bad - * (erased) causing the tape drive to generate an index pulse - * thus causing a no-data error before the requested sector - * is reached. - */ - ftape_tape_running = 0; - TRACE(ft_t_noise, "target segment: %d/%d%s", segment_id, sector_offset, - ft_buffer[ft_head]->retry > 0 ? " retry" : ""); - if (ft_buffer[ft_head]->retry > 0) { /* this is a retry */ - int dist = segment_id - last_segment; - - if ((int)ft_history.overrun_errors < overrun_count_offset) { - overrun_count_offset = ft_history.overrun_errors; - } else if (dist < 0 || dist > 50) { - overrun_count_offset = ft_history.overrun_errors; - } else if ((ft_history.overrun_errors - - overrun_count_offset) >= 8) { - if (ftape_increase_threshold() >= 0) { - --ft_buffer[ft_head]->retry; - overrun_count_offset = - ft_history.overrun_errors; - TRACE(ft_t_warn, "increased threshold because " - "of excessive overrun errors"); - } else if (!bad_bus_timing && ft_data_rate >= 1000) { - ftape_half_data_rate(); - --ft_buffer[ft_head]->retry; - bad_bus_timing = 1; - overrun_count_offset = - ft_history.overrun_errors; - TRACE(ft_t_warn, "reduced datarate because " - "of excessive overrun errors"); - } - } - } - last_segment = segment_id; - if (ft_location.track != track || - (ftape_might_be_off_track && ft_buffer[ft_head]->retry== 0)) { - /* current track unknown or not equal to destination - */ - ftape_ready_wait(ftape_timeout.seek, &status); - ftape_seek_head_to_track(track); - /* overrun_count_offset = ft_history.overrun_errors; */ - } - result = -EIO; - retry = 0; - while (result < 0 && - retry++ <= 5 && - !ft_failure && - !(sigtestsetmask(¤t->pending.signal, _DONT_BLOCK))) { - - if (retry && start_offset < 5) { - start_offset ++; - } - /* Check if we are able to catch the requested - * segment in time. - */ - if ((ft_location.known || (determine_position() == 0)) && - ft_location.segment >= - (segment_id - - ((ftape_tape_running || ft_location.bot) - ? 0 : start_offset))) { - /* Too far ahead (in or past target segment). - */ - if (ftape_tape_running) { - if ((result = ftape_stop_tape(&status)) < 0) { - TRACE(ft_t_err, - "stop tape failed with code %d", - result); - break; - } - TRACE(ft_t_noise, "tape stopped"); - ftape_tape_running = 0; - } - TRACE(ft_t_noise, "repositioning"); - ++ft_history.rewinds; - if (segment_id % ft_segments_per_track < start_offset){ - TRACE(ft_t_noise, "end of track condition\n" - KERN_INFO "segment_id : %d\n" - KERN_INFO "ft_segments_per_track: %d\n" - KERN_INFO "start_offset : %d", - segment_id, ft_segments_per_track, - start_offset); - - /* If seeking to first segments on - * track better do a complete rewind - * to logical begin of track to get a - * more steady tape motion. - */ - result = ftape_command_wait( - (ft_location.track & 1) - ? QIC_PHYSICAL_FORWARD - : QIC_PHYSICAL_REVERSE, - ftape_timeout.rewind, &status); - check_bot_eot(status); /* update location */ - } else { - result= skip_reverse(segment_id - start_offset, - &status); - } - } - if (!ft_location.known) { - TRACE(ft_t_bug, "panic: location not known"); - result = -EIO; - continue; /* while() will check for failure */ - } - TRACE(ft_t_noise, "current segment: %d/%d", - ft_location.segment, ft_location.sector); - /* We're on the right track somewhere before the - * wanted segment. Start tape movement if needed and - * skip to just before or inside the requested - * segment. Keep tape running. - */ - result = 0; - if (ft_location.segment < - (segment_id - ((ftape_tape_running || ft_location.bot) - ? 0 : start_offset))) { - if (sector_offset > 0) { - result = seek_forward(segment_id, - retry <= 3); - } else { - result = seek_forward(segment_id - 1, - retry <= 3); - } - } - if (result == 0 && - ft_location.segment != - (segment_id - (sector_offset > 0 ? 0 : 1))) { - result = -EIO; - } - } - if (result < 0) { - TRACE(ft_t_err, "failed to reposition"); - } else { - ft_runner_status = running; - } - TRACE_EXIT result; -} diff --git a/drivers/char/ftape/lowlevel/ftape-rw.h b/drivers/char/ftape/lowlevel/ftape-rw.h deleted file mode 100644 index 32f4feeb887..00000000000 --- a/drivers/char/ftape/lowlevel/ftape-rw.h +++ /dev/null @@ -1,111 +0,0 @@ -#ifndef _FTAPE_RW_H -#define _FTAPE_RW_H - -/* - * Copyright (C) 1993-1996 Bas Laarhoven, - * (C) 1996-1997 Claus-Justus Heine. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; see the file COPYING. If not, write to - the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - - * - * $Source: /homes/cvs/ftape-stacked/ftape/lowlevel/ftape-rw.h,v $ - * $Revision: 1.2 $ - * $Date: 1997/10/05 19:18:25 $ - * - * This file contains the definitions for the read and write - * functions for the QIC-117 floppy-tape driver for Linux. - * - * Claus-Justus Heine (1996/09/20): Add definition of format code 6 - * Claus-Justus Heine (1996/10/04): Changed GET/PUT macros to cast to (__u8 *) - * - */ - -#include "../lowlevel/fdc-io.h" -#include "../lowlevel/ftape-init.h" -#include "../lowlevel/ftape-bsm.h" - -#include <asm/unaligned.h> - -#define GET2(address, offset) get_unaligned((__u16*)((__u8 *)address + offset)) -#define GET4(address, offset) get_unaligned((__u32*)((__u8 *)address + offset)) -#define GET8(address, offset) get_unaligned((__u64*)((__u8 *)address + offset)) -#define PUT2(address, offset , value) put_unaligned((value), (__u16*)((__u8 *)address + offset)) -#define PUT4(address, offset , value) put_unaligned((value), (__u32*)((__u8 *)address + offset)) -#define PUT8(address, offset , value) put_unaligned((value), (__u64*)((__u8 *)address + offset)) - -enum runner_status_enum { - idle = 0, - running, - do_abort, - aborting, - logical_eot, - end_of_tape, -}; - -typedef enum ft_buffer_queue { - ft_queue_head = 0, - ft_queue_tail = 1 -} ft_buffer_queue_t; - - -typedef struct { - int track; /* tape head position */ - volatile int segment; /* current segment */ - volatile int sector; /* sector offset within current segment */ - volatile unsigned int bot; /* logical begin of track */ - volatile unsigned int eot; /* logical end of track */ - volatile unsigned int known; /* validates bot, segment, sector */ -} location_record; - -/* Count nr of 1's in pattern. - */ -static inline int count_ones(unsigned long mask) -{ - int bits; - - for (bits = 0; mask != 0; mask >>= 1) { - if (mask & 1) { - ++bits; - } - } - return bits; -} - -#define FT_MAX_NR_BUFFERS 16 /* arbitrary value */ -/* ftape-rw.c defined global vars. - */ -extern buffer_struct *ft_buffer[FT_MAX_NR_BUFFERS]; -extern int ft_nr_buffers; -extern location_record ft_location; -extern volatile int ftape_tape_running; - -/* ftape-rw.c defined global functions. - */ -extern int ftape_setup_new_segment(buffer_struct * buff, - int segment_id, - int offset); -extern int ftape_calc_next_cluster(buffer_struct * buff); -extern buffer_struct *ftape_next_buffer (ft_buffer_queue_t pos); -extern buffer_struct *ftape_get_buffer (ft_buffer_queue_t pos); -extern int ftape_buffer_id (ft_buffer_queue_t pos); -extern void ftape_reset_buffer(void); -extern void ftape_tape_parameters(__u8 drive_configuration); -extern int ftape_wait_segment(buffer_state_enum state); -extern int ftape_dumb_stop(void); -extern int ftape_start_tape(int segment_id, int offset); -extern int ftape_stop_tape(int *pstatus); -extern int ftape_handle_logical_eot(void); -extern buffer_state_enum ftape_set_state(buffer_state_enum new_state); -#endif /* _FTAPE_RW_H */ diff --git a/drivers/char/ftape/lowlevel/ftape-setup.c b/drivers/char/ftape/lowlevel/ftape-setup.c deleted file mode 100644 index 678340acd0b..00000000000 --- a/drivers/char/ftape/lowlevel/ftape-setup.c +++ /dev/null @@ -1,104 +0,0 @@ -/* - * Copyright (C) 1996, 1997 Claus-Justus Heine. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; see the file COPYING. If not, write to - the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - - * - * $Source: /homes/cvs/ftape-stacked/ftape/lowlevel/ftape-setup.c,v $ - * $Revision: 1.7 $ - * $Date: 1997/10/10 09:57:06 $ - * - * This file contains the code for processing the kernel command - * line options for the QIC-40/80/3010/3020 floppy-tape driver - * "ftape" for Linux. - */ - -#include <linux/string.h> -#include <linux/errno.h> -#include <linux/mm.h> - -#include <linux/ftape.h> -#include <linux/init.h> -#include "../lowlevel/ftape-tracing.h" -#include "../lowlevel/fdc-io.h" - -static struct param_table { - const char *name; - int *var; - int def_param; - int min; - int max; -} config_params[] __initdata = { -#ifndef CONFIG_FT_NO_TRACE_AT_ALL - { "tracing", &ftape_tracing, 3, ft_t_bug, ft_t_any}, -#endif - { "ioport", &ft_fdc_base, CONFIG_FT_FDC_BASE, 0x0, 0xfff}, - { "irq", &ft_fdc_irq, CONFIG_FT_FDC_IRQ, 2, 15}, - { "dma", &ft_fdc_dma, CONFIG_FT_FDC_DMA, 0, 3}, - { "threshold", &ft_fdc_threshold, CONFIG_FT_FDC_THR, 1, 16}, - { "datarate", &ft_fdc_rate_limit, CONFIG_FT_FDC_MAX_RATE, 500, 2000}, - { "fc10", &ft_probe_fc10, CONFIG_FT_PROBE_FC10, 0, 1}, - { "mach2", &ft_mach2, CONFIG_FT_MACH2, 0, 1} -}; - -static int __init ftape_setup(char *str) -{ - int i; - int param; - int ints[2]; - - TRACE_FUN(ft_t_flow); - - str = get_options(str, ARRAY_SIZE(ints), ints); - if (str) { - for (i=0; i < NR_ITEMS(config_params); i++) { - if (strcmp(str,config_params[i].name) == 0){ - if (ints[0]) { - param = ints[1]; - } else { - param = config_params[i].def_param; - } - if (param < config_params[i].min || - param > config_params[i].max) { - TRACE(ft_t_err, - "parameter %s out of range %d ... %d", - config_params[i].name, - config_params[i].min, - config_params[i].max); - goto out; - } - if(config_params[i].var) { - TRACE(ft_t_info, "%s=%d", str, param); - *config_params[i].var = param; - } - goto out; - } - } - } - if (str) { - TRACE(ft_t_err, "unknown ftape option [%s]", str); - - TRACE(ft_t_err, "allowed options are:"); - for (i=0; i < NR_ITEMS(config_params); i++) { - TRACE(ft_t_err, " %s",config_params[i].name); - } - } else { - TRACE(ft_t_err, "botched ftape option"); - } - out: - TRACE_EXIT 1; -} - -__setup("ftape=", ftape_setup); diff --git a/drivers/char/ftape/lowlevel/ftape-tracing.c b/drivers/char/ftape/lowlevel/ftape-tracing.c deleted file mode 100644 index 7fdc6567440..00000000000 --- a/drivers/char/ftape/lowlevel/ftape-tracing.c +++ /dev/null @@ -1,118 +0,0 @@ -/* - * Copyright (C) 1993-1996 Bas Laarhoven, - * (C) 1996-1997 Claus-Justus Heine. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; see the file COPYING. If not, write to - the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - - * - * $Source: /homes/cvs/ftape-stacked/ftape/lowlevel/ftape-tracing.c,v $ - * $Revision: 1.2 $ - * $Date: 1997/10/05 19:18:27 $ - * - * This file contains the reading code - * for the QIC-117 floppy-tape driver for Linux. - */ - -#include <linux/ftape.h> -#include "../lowlevel/ftape-tracing.h" - -/* Global vars. - */ -/* tracing - * set it to: to log : - * 0 bugs - * 1 + errors - * 2 + warnings - * 3 + information - * 4 + more information - * 5 + program flow - * 6 + fdc/dma info - * 7 + data flow - * 8 + everything else - */ -ft_trace_t ftape_tracing = ft_t_info; /* Default level: information and up */ -int ftape_function_nest_level; - -/* Local vars. - */ -static __u8 trace_id; -static char spacing[] = "* "; - -void ftape_trace_call(const char *file, const char *name) -{ - char *indent; - - /* Since printk seems not to work with "%*s" format - * we'll use this work-around. - */ - if (ftape_function_nest_level < 0) { - printk(KERN_INFO "function nest level (%d) < 0\n", - ftape_function_nest_level); - ftape_function_nest_level = 0; - } - if (ftape_function_nest_level < sizeof(spacing)) { - indent = (spacing + - sizeof(spacing) - 1 - - ftape_function_nest_level); - } else { - indent = spacing; - } - printk(KERN_INFO "[%03d]%s+%s (%s)\n", - (int) trace_id++, indent, file, name); -} - -void ftape_trace_exit(const char *file, const char *name) -{ - char *indent; - - /* Since printk seems not to work with "%*s" format - * we'll use this work-around. - */ - if (ftape_function_nest_level < 0) { - printk(KERN_INFO "function nest level (%d) < 0\n", ftape_function_nest_level); - ftape_function_nest_level = 0; - } - if (ftape_function_nest_level < sizeof(spacing)) { - indent = (spacing + - sizeof(spacing) - 1 - - ftape_function_nest_level); - } else { - indent = spacing; - } - printk(KERN_INFO "[%03d]%s-%s (%s)\n", - (int) trace_id++, indent, file, name); -} - -void ftape_trace_log(const char *file, const char *function) -{ - char *indent; - - /* Since printk seems not to work with "%*s" format - * we'll use this work-around. - */ - if (ftape_function_nest_level < 0) { - printk(KERN_INFO "function nest level (%d) < 0\n", ftape_function_nest_level); - ftape_function_nest_level = 0; - } - if (ftape_function_nest_level < sizeof(spacing)) { - indent = (spacing + - sizeof(spacing) - 1 - - ftape_function_nest_level); - } else { - indent = spacing; - } - printk(KERN_INFO "[%03d]%s%s (%s) - ", - (int) trace_id++, indent, file, function); -} diff --git a/drivers/char/ftape/lowlevel/ftape-tracing.h b/drivers/char/ftape/lowlevel/ftape-tracing.h deleted file mode 100644 index 2950810c708..00000000000 --- a/drivers/char/ftape/lowlevel/ftape-tracing.h +++ /dev/null @@ -1,179 +0,0 @@ -#ifndef _FTAPE_TRACING_H -#define _FTAPE_TRACING_H - -/* - * Copyright (C) 1994-1996 Bas Laarhoven, - * (C) 1996-1997 Claus-Justus Heine. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; see the file COPYING. If not, write to - the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - - * - * $Source: /homes/cvs/ftape-stacked/ftape/lowlevel/ftape-tracing.h,v $ - * $Revision: 1.2 $ - * $Date: 1997/10/05 19:18:28 $ - * - * This file contains definitions that eases the debugging of the - * QIC-40/80/3010/3020 floppy-tape driver "ftape" for Linux. - */ - -#include <linux/kernel.h> - -/* - * Be very careful with TRACE_EXIT and TRACE_ABORT. - * - * if (something) TRACE_EXIT error; - * - * will NOT work. Use - * - * if (something) { - * TRACE_EXIT error; - * } - * - * instead. Maybe a bit dangerous, but save lots of lines of code. - */ - -#define LL_X "%d/%d KB" -#define LL(x) (unsigned int)((__u64)(x)>>10), (unsigned int)((x)&1023) - -typedef enum { - ft_t_nil = -1, - ft_t_bug, - ft_t_err, - ft_t_warn, - ft_t_info, - ft_t_noise, - ft_t_flow, - ft_t_fdc_dma, - ft_t_data_flow, - ft_t_any -} ft_trace_t; - -#ifdef CONFIG_FT_NO_TRACE_AT_ALL -/* the compiler will optimize away most TRACE() macros - */ -#define FT_TRACE_TOP_LEVEL ft_t_bug -#define TRACE_FUN(level) do {} while(0) -#define TRACE_EXIT return -#define TRACE(l, m, i...) \ -{ \ - if ((ft_trace_t)(l) == FT_TRACE_TOP_LEVEL) { \ - printk(KERN_INFO"ftape%s(%s):\n" \ - KERN_INFO m".\n" ,__FILE__, __FUNCTION__ , ##i); \ - } \ -} -#define SET_TRACE_LEVEL(l) if ((l) == (l)) do {} while(0) -#define TRACE_LEVEL FT_TRACE_TOP_LEVEL - -#else - -#ifdef CONFIG_FT_NO_TRACE -/* the compiler will optimize away many TRACE() macros - * the ftape_simple_trace_call() function simply increments - * the function nest level. - */ -#define FT_TRACE_TOP_LEVEL ft_t_warn -#define TRACE_FUN(level) ftape_function_nest_level++ -#define TRACE_EXIT ftape_function_nest_level--; return - -#else -#ifdef CONFIG_FT_FULL_DEBUG -#define FT_TRACE_TOP_LEVEL ft_t_any -#else -#define FT_TRACE_TOP_LEVEL ft_t_flow -#endif -#define TRACE_FUN(level) \ - const ft_trace_t _tracing = level; \ - if (ftape_tracing >= (ft_trace_t)(level) && \ - (ft_trace_t)(level) <= FT_TRACE_TOP_LEVEL) \ - ftape_trace_call(__FILE__, __FUNCTION__); \ - ftape_function_nest_level ++; - -#define TRACE_EXIT \ - --ftape_function_nest_level; \ - if (ftape_tracing >= (ft_trace_t)(_tracing) && \ - (ft_trace_t)(_tracing) <= FT_TRACE_TOP_LEVEL) \ - ftape_trace_exit(__FILE__, __FUNCTION__); \ - return - -#endif - -#define TRACE(l, m, i...) \ -{ \ - if (ftape_tracing >= (ft_trace_t)(l) && \ - (ft_trace_t)(l) <= FT_TRACE_TOP_LEVEL) { \ - ftape_trace_log(__FILE__, __FUNCTION__); \ - printk(m".\n" ,##i); \ - } \ -} - -#define SET_TRACE_LEVEL(l) \ -{ \ - if ((ft_trace_t)(l) <= FT_TRACE_TOP_LEVEL) { \ - ftape_tracing = (ft_trace_t)(l); \ - } else { \ - ftape_tracing = FT_TRACE_TOP_LEVEL; \ - } \ -} -#define TRACE_LEVEL \ -((ftape_tracing <= FT_TRACE_TOP_LEVEL) ? ftape_tracing : FT_TRACE_TOP_LEVEL) - - -/* Global variables declared in tracing.c - */ -extern ft_trace_t ftape_tracing; /* sets default level */ -extern int ftape_function_nest_level; - -/* Global functions declared in tracing.c - */ -extern void ftape_trace_call(const char *file, const char *name); -extern void ftape_trace_exit(const char *file, const char *name); -extern void ftape_trace_log (const char *file, const char *name); - -#endif /* !defined(CONFIG_FT_NO_TRACE_AT_ALL) */ - -/* - * Abort with a message. - */ -#define TRACE_ABORT(res, i...) \ -{ \ - TRACE(i); \ - TRACE_EXIT res; \ -} - -/* The following transforms the common "if(result < 0) ... " into a - * one-liner. - */ -#define _TRACE_CATCH(level, fun, action) \ -{ \ - int _res = (fun); \ - if (_res < 0) { \ - do { action /* */ ; } while(0); \ - TRACE_ABORT(_res, level, "%s failed: %d", #fun, _res); \ - } \ -} - -#define TRACE_CATCH(fun, fail) _TRACE_CATCH(ft_t_err, fun, fail) - -/* Abort the current function when signalled. This doesn't belong here, - * but rather into ftape-rw.h (maybe) - */ -#define FT_SIGNAL_EXIT(sig_mask) \ - if (sigtestsetmask(¤t->pending.signal, sig_mask)) { \ - TRACE_ABORT(-EINTR, \ - ft_t_warn, \ - "interrupted by non-blockable signal"); \ - } - -#endif /* _FTAPE_TRACING_H */ diff --git a/drivers/char/ftape/lowlevel/ftape-write.c b/drivers/char/ftape/lowlevel/ftape-write.c deleted file mode 100644 index 45601ec801e..00000000000 --- a/drivers/char/ftape/lowlevel/ftape-write.c +++ /dev/null @@ -1,336 +0,0 @@ -/* - * Copyright (C) 1993-1995 Bas Laarhoven, - * (C) 1996-1997 Claus-Justus Heine. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; see the file COPYING. If not, write to - the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - - * - * $Source: /homes/cvs/ftape-stacked/ftape/lowlevel/ftape-write.c,v $ - * $Revision: 1.3.4.1 $ - * $Date: 1997/11/14 18:07:04 $ - * - * This file contains the writing code - * for the QIC-117 floppy-tape driver for Linux. - */ - -#include <linux/string.h> -#include <linux/errno.h> -#include <linux/mm.h> - -#include <linux/ftape.h> -#include <linux/qic117.h> -#include "../lowlevel/ftape-tracing.h" -#include "../lowlevel/ftape-write.h" -#include "../lowlevel/ftape-read.h" -#include "../lowlevel/ftape-io.h" -#include "../lowlevel/ftape-ctl.h" -#include "../lowlevel/ftape-rw.h" -#include "../lowlevel/ftape-ecc.h" -#include "../lowlevel/ftape-bsm.h" -#include "../lowlevel/fdc-isr.h" - -/* Global vars. - */ - -/* Local vars. - */ -static int last_write_failed; - -void ftape_zap_write_buffers(void) -{ - int i; - - for (i = 0; i < ft_nr_buffers; ++i) { - ft_buffer[i]->status = done; - } - ftape_reset_buffer(); -} - -static int copy_and_gen_ecc(void *destination, - const void *source, - const SectorMap bad_sector_map) -{ - int result; - struct memory_segment mseg; - int bads = count_ones(bad_sector_map); - TRACE_FUN(ft_t_any); - - if (bads > 0) { - TRACE(ft_t_noise, "bad sectors in map: %d", bads); - } - if (bads + 3 >= FT_SECTORS_PER_SEGMENT) { - TRACE(ft_t_noise, "empty segment"); - mseg.blocks = 0; /* skip entire segment */ - result = 0; /* nothing written */ - } else { - mseg.blocks = FT_SECTORS_PER_SEGMENT - bads; - mseg.data = destination; - memcpy(mseg.data, source, (mseg.blocks - 3) * FT_SECTOR_SIZE); - result = ftape_ecc_set_segment_parity(&mseg); - if (result < 0) { - TRACE(ft_t_err, "ecc_set_segment_parity failed"); - } else { - result = (mseg.blocks - 3) * FT_SECTOR_SIZE; - } - } - TRACE_EXIT result; -} - - -int ftape_start_writing(const ft_write_mode_t mode) -{ - buffer_struct *head = ftape_get_buffer(ft_queue_head); - int segment_id = head->segment_id; - int result; - buffer_state_enum wanted_state = (mode == FT_WR_DELETE - ? deleting - : writing); - TRACE_FUN(ft_t_flow); - - if ((ft_driver_state != wanted_state) || head->status != waiting) { - TRACE_EXIT 0; - } - ftape_setup_new_segment(head, segment_id, 1); - if (mode == FT_WR_SINGLE) { - /* stop tape instead of pause */ - head->next_segment = 0; - } - ftape_calc_next_cluster(head); /* prepare */ - head->status = ft_driver_state; /* either writing or deleting */ - if (ft_runner_status == idle) { - TRACE(ft_t_noise, - "starting runner for segment %d", segment_id); - TRACE_CATCH(ftape_start_tape(segment_id,head->sector_offset),); - } else { - TRACE(ft_t_noise, "runner not idle, not starting tape"); - } - /* go */ - result = fdc_setup_read_write(head, (mode == FT_WR_DELETE - ? FDC_WRITE_DELETED : FDC_WRITE)); - ftape_set_state(wanted_state); /* should not be necessary */ - TRACE_EXIT result; -} - -/* Wait until all data is actually written to tape. - * - * There is a problem: when the tape runs into logical EOT, then this - * failes. We need to restart the runner in this case. - */ -int ftape_loop_until_writes_done(void) -{ - buffer_struct *head; - TRACE_FUN(ft_t_flow); - - while ((ft_driver_state == writing || ft_driver_state == deleting) && - ftape_get_buffer(ft_queue_head)->status != done) { - /* set the runner status to idle if at lEOT */ - TRACE_CATCH(ftape_handle_logical_eot(), last_write_failed = 1); - /* restart the tape if necessary */ - if (ft_runner_status == idle) { - TRACE(ft_t_noise, "runner is idle, restarting"); - if (ft_driver_state == deleting) { - TRACE_CATCH(ftape_start_writing(FT_WR_DELETE), - last_write_failed = 1); - } else { - TRACE_CATCH(ftape_start_writing(FT_WR_MULTI), - last_write_failed = 1); - } - } - TRACE(ft_t_noise, "tail: %d, head: %d", - ftape_buffer_id(ft_queue_tail), - ftape_buffer_id(ft_queue_head)); - TRACE_CATCH(fdc_interrupt_wait(5 * FT_SECOND), - last_write_failed = 1); - head = ftape_get_buffer(ft_queue_head); - if (head->status == error) { - /* Allow escape from loop when signaled ! - */ - FT_SIGNAL_EXIT(_DONT_BLOCK); - if (head->hard_error_map != 0) { - /* Implement hard write error recovery here - */ - } - /* retry this one */ - head->status = waiting; - if (ft_runner_status == aborting) { - ftape_dumb_stop(); - } - if (ft_runner_status != idle) { - TRACE_ABORT(-EIO, ft_t_err, - "unexpected state: " - "ft_runner_status != idle"); - } - ftape_start_writing(ft_driver_state == deleting - ? FT_WR_MULTI : FT_WR_DELETE); - } - TRACE(ft_t_noise, "looping until writes done"); - } - ftape_set_state(idle); - TRACE_EXIT 0; -} - -/* Write given segment from buffer at address to tape. - */ -static int write_segment(const int segment_id, - const void *address, - const ft_write_mode_t write_mode) -{ - int bytes_written = 0; - buffer_struct *tail; - buffer_state_enum wanted_state = (write_mode == FT_WR_DELETE - ? deleting : writing); - TRACE_FUN(ft_t_flow); - - TRACE(ft_t_noise, "segment_id = %d", segment_id); - if (ft_driver_state != wanted_state) { - if (ft_driver_state == deleting || - wanted_state == deleting) { - TRACE_CATCH(ftape_loop_until_writes_done(),); - } - TRACE(ft_t_noise, "calling ftape_abort_operation"); - TRACE_CATCH(ftape_abort_operation(),); - ftape_zap_write_buffers(); - ftape_set_state(wanted_state); - } - /* if all buffers full we'll have to wait... - */ - ftape_wait_segment(wanted_state); - tail = ftape_get_buffer(ft_queue_tail); - switch(tail->status) { - case done: - ft_history.defects += count_ones(tail->hard_error_map); - break; - case waiting: - /* this could happen with multiple EMPTY_SEGMENTs, but - * shouldn't happen any more as we re-start the runner even - * with an empty segment. - */ - bytes_written = -EAGAIN; - break; - case error: - /* setup for a retry - */ - tail->status = waiting; - bytes_written = -EAGAIN; /* force retry */ - if (tail->hard_error_map != 0) { - TRACE(ft_t_warn, - "warning: %d hard error(s) in written segment", - count_ones(tail->hard_error_map)); - TRACE(ft_t_noise, "hard_error_map = 0x%08lx", - (long)tail->hard_error_map); - /* Implement hard write error recovery here - */ - } - break; - default: - TRACE_ABORT(-EIO, ft_t_err, - "wait for empty segment failed, tail status: %d", - tail->status); - } - /* should runner stop ? - */ - if (ft_runner_status == aborting) { - buffer_struct *head = ftape_get_buffer(ft_queue_head); - if (head->status == wanted_state) { - head->status = done; /* ???? */ - } - /* don't call abort_operation(), we don't want to zap - * the dma buffers - */ - TRACE_CATCH(ftape_dumb_stop(),); - } else { - /* If just passed last segment on tape: wait for BOT - * or EOT mark. Sets ft_runner_status to idle if at lEOT - * and successful - */ - TRACE_CATCH(ftape_handle_logical_eot(),); - } - if (tail->status == done) { - /* now at least one buffer is empty, fill it with our - * data. skip bad sectors and generate ecc. - * copy_and_gen_ecc return nr of bytes written, range - * 0..29 Kb inclusive! - * - * Empty segments are handled inside coyp_and_gen_ecc() - */ - if (write_mode != FT_WR_DELETE) { - TRACE_CATCH(bytes_written = copy_and_gen_ecc( - tail->address, address, - ftape_get_bad_sector_entry(segment_id)),); - } - tail->segment_id = segment_id; - tail->status = waiting; - tail = ftape_next_buffer(ft_queue_tail); - } - /* Start tape only if all buffers full or flush mode. - * This will give higher probability of streaming. - */ - if (ft_runner_status != running && - ((tail->status == waiting && - ftape_get_buffer(ft_queue_head) == tail) || - write_mode != FT_WR_ASYNC)) { - TRACE_CATCH(ftape_start_writing(write_mode),); - } - TRACE_EXIT bytes_written; -} - -/* Write as much as fits from buffer to the given segment on tape - * and handle retries. - * Return the number of bytes written (>= 0), or: - * -EIO write failed - * -EINTR interrupted by signal - * -ENOSPC device full - */ -int ftape_write_segment(const int segment_id, - const void *buffer, - const ft_write_mode_t flush) -{ - int retry = 0; - int result; - TRACE_FUN(ft_t_flow); - - ft_history.used |= 2; - if (segment_id >= ft_tracks_per_tape*ft_segments_per_track) { - /* tape full */ - TRACE_ABORT(-ENOSPC, ft_t_err, - "invalid segment id: %d (max %d)", - segment_id, - ft_tracks_per_tape * ft_segments_per_track -1); - } - for (;;) { - if ((result = write_segment(segment_id, buffer, flush)) >= 0) { - if (result == 0) { /* empty segment */ - TRACE(ft_t_noise, - "empty segment, nothing written"); - } - TRACE_EXIT result; - } - if (result == -EAGAIN) { - if (++retry > 100) { /* give up */ - TRACE_ABORT(-EIO, ft_t_err, - "write failed, >100 retries in segment"); - } - TRACE(ft_t_warn, "write error, retry %d (%d)", - retry, - ftape_get_buffer(ft_queue_tail)->segment_id); - } else { - TRACE_ABORT(result, ft_t_err, - "write_segment failed, error: %d", result); - } - /* Allow escape from loop when signaled ! - */ - FT_SIGNAL_EXIT(_DONT_BLOCK); - } -} diff --git a/drivers/char/ftape/lowlevel/ftape-write.h b/drivers/char/ftape/lowlevel/ftape-write.h deleted file mode 100644 index 0e7f898b7af..00000000000 --- a/drivers/char/ftape/lowlevel/ftape-write.h +++ /dev/null @@ -1,53 +0,0 @@ -#ifndef _FTAPE_WRITE_H -#define _FTAPE_WRITE_H - -/* - * Copyright (C) 1994-1995 Bas Laarhoven, - * (C) 1996-1997 Claus-Justus Heine. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; see the file COPYING. If not, write to - the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - - * - $Source: /homes/cvs/ftape-stacked/ftape/lowlevel/ftape-write.h,v $ - $Author: claus $ - * - $Revision: 1.2 $ - $Date: 1997/10/05 19:18:30 $ - $State: Exp $ - * - * This file contains the definitions for the write functions - * for the QIC-117 floppy-tape driver for Linux. - * - */ - - -/* ftape-write.c defined global functions. - */ -typedef enum { - FT_WR_ASYNC = 0, /* start tape only when all buffers are full */ - FT_WR_MULTI = 1, /* start tape, but don't necessarily stop */ - FT_WR_SINGLE = 2, /* write a single segment and stop afterwards */ - FT_WR_DELETE = 3 /* write deleted data marks */ -} ft_write_mode_t; - -extern int ftape_start_writing(const ft_write_mode_t mode); -extern int ftape_write_segment(const int segment, - const void *address, - const ft_write_mode_t flushing); -extern void ftape_zap_write_buffers(void); -extern int ftape_loop_until_writes_done(void); - -#endif /* _FTAPE_WRITE_H */ - diff --git a/drivers/char/ftape/lowlevel/ftape_syms.c b/drivers/char/ftape/lowlevel/ftape_syms.c deleted file mode 100644 index 8e0dc4a07ca..00000000000 --- a/drivers/char/ftape/lowlevel/ftape_syms.c +++ /dev/null @@ -1,87 +0,0 @@ -/* - * Copyright (C) 1996-1997 Claus-Justus Heine - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; see the file COPYING. If not, write to - the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - - * - * $Source: /homes/cvs/ftape-stacked/ftape/lowlevel/ftape_syms.c,v $ - * $Revision: 1.4 $ - * $Date: 1997/10/17 00:03:51 $ - * - * This file contains the symbols that the ftape low level - * part of the QIC-40/80/3010/3020 floppy-tape driver "ftape" - * exports to its high level clients - */ - -#include <linux/module.h> - -#include <linux/ftape.h> -#include "../lowlevel/ftape-tracing.h" -#include "../lowlevel/ftape-init.h" -#include "../lowlevel/fdc-io.h" -#include "../lowlevel/ftape-read.h" -#include "../lowlevel/ftape-write.h" -#include "../lowlevel/ftape-io.h" -#include "../lowlevel/ftape-ctl.h" -#include "../lowlevel/ftape-rw.h" -#include "../lowlevel/ftape-bsm.h" -#include "../lowlevel/ftape-buffer.h" -#include "../lowlevel/ftape-format.h" - -/* bad sector handling from ftape-bsm.c */ -EXPORT_SYMBOL(ftape_get_bad_sector_entry); -EXPORT_SYMBOL(ftape_find_end_of_bsm_list); -/* from ftape-rw.c */ -EXPORT_SYMBOL(ftape_set_state); -/* from ftape-ctl.c */ -EXPORT_SYMBOL(ftape_seek_to_bot); -EXPORT_SYMBOL(ftape_seek_to_eot); -EXPORT_SYMBOL(ftape_abort_operation); -EXPORT_SYMBOL(ftape_get_status); -EXPORT_SYMBOL(ftape_enable); -EXPORT_SYMBOL(ftape_disable); -EXPORT_SYMBOL(ftape_mmap); -EXPORT_SYMBOL(ftape_calibrate_data_rate); -/* from ftape-io.c */ -EXPORT_SYMBOL(ftape_reset_drive); -EXPORT_SYMBOL(ftape_command); -EXPORT_SYMBOL(ftape_parameter); -EXPORT_SYMBOL(ftape_ready_wait); -EXPORT_SYMBOL(ftape_report_operation); -EXPORT_SYMBOL(ftape_report_error); -/* from ftape-read.c */ -EXPORT_SYMBOL(ftape_read_segment_fraction); -EXPORT_SYMBOL(ftape_zap_read_buffers); -EXPORT_SYMBOL(ftape_read_header_segment); -EXPORT_SYMBOL(ftape_decode_header_segment); -/* from ftape-write.c */ -EXPORT_SYMBOL(ftape_write_segment); -EXPORT_SYMBOL(ftape_start_writing); -EXPORT_SYMBOL(ftape_loop_until_writes_done); -/* from ftape-buffer.h */ -EXPORT_SYMBOL(ftape_set_nr_buffers); -/* from ftape-format.h */ -EXPORT_SYMBOL(ftape_format_track); -EXPORT_SYMBOL(ftape_format_status); -EXPORT_SYMBOL(ftape_verify_segment); -/* from tracing.c */ -#ifndef CONFIG_FT_NO_TRACE_AT_ALL -EXPORT_SYMBOL(ftape_tracing); -EXPORT_SYMBOL(ftape_function_nest_level); -EXPORT_SYMBOL(ftape_trace_call); -EXPORT_SYMBOL(ftape_trace_exit); -EXPORT_SYMBOL(ftape_trace_log); -#endif - diff --git a/drivers/char/ftape/zftape/Makefile b/drivers/char/ftape/zftape/Makefile deleted file mode 100644 index 6d91c1f77c0..00000000000 --- a/drivers/char/ftape/zftape/Makefile +++ /dev/null @@ -1,36 +0,0 @@ -# -# Copyright (C) 1996, 1997 Claus-Justus Heine. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; see the file COPYING. If not, write to -# the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. -# -# $Source: /homes/cvs/ftape-stacked/ftape/zftape/Makefile,v $ -# $Revision: 1.4 $ -# $Date: 1997/10/05 19:18:58 $ -# -# Makefile for the QIC-40/80/3010/3020 zftape interface VFS to -# ftape -# - - -# ZFT_OBSOLETE - enable the MTIOC_ZFTAPE_GETBLKSZ ioctl. You should -# leave this enabled for compatibility with taper. - -obj-$(CONFIG_ZFTAPE) += zftape.o - -zftape-objs := zftape-rw.o zftape-ctl.o zftape-read.o \ - zftape-write.o zftape-vtbl.o zftape-eof.o \ - zftape-init.o zftape-buffers.o zftape_syms.o - -EXTRA_CFLAGS := -DZFT_OBSOLETE diff --git a/drivers/char/ftape/zftape/zftape-buffers.c b/drivers/char/ftape/zftape/zftape-buffers.c deleted file mode 100644 index 7ebce2ec789..00000000000 --- a/drivers/char/ftape/zftape/zftape-buffers.c +++ /dev/null @@ -1,149 +0,0 @@ -/* - * Copyright (C) 1995-1997 Claus-Justus Heine. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; see the file COPYING. If not, write to - the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - - * - * $Source: /homes/cvs/ftape-stacked/ftape/zftape/zftape-buffers.c,v $ - * $Revision: 1.2 $ - * $Date: 1997/10/05 19:18:59 $ - * - * This file contains the dynamic buffer allocation routines - * of zftape - */ - -#include <linux/errno.h> -#include <linux/mm.h> -#include <linux/slab.h> -#include <linux/delay.h> - -#include <linux/zftape.h> - -#include <linux/vmalloc.h> - -#include "../zftape/zftape-init.h" -#include "../zftape/zftape-eof.h" -#include "../zftape/zftape-ctl.h" -#include "../zftape/zftape-write.h" -#include "../zftape/zftape-read.h" -#include "../zftape/zftape-rw.h" -#include "../zftape/zftape-vtbl.h" - -/* global variables - */ - -/* local varibales - */ -static unsigned int used_memory; -static unsigned int peak_memory; - -void zft_memory_stats(void) -{ - TRACE_FUN(ft_t_flow); - - TRACE(ft_t_noise, "Memory usage (vmalloc allocations):\n" - KERN_INFO "total allocated: %d\n" - KERN_INFO "peak allocation: %d", - used_memory, peak_memory); - peak_memory = used_memory; - TRACE_EXIT; -} - -int zft_vcalloc_once(void *new, size_t size) -{ - TRACE_FUN(ft_t_flow); - if (zft_vmalloc_once(new, size) < 0) { - TRACE_EXIT -ENOMEM; - } - memset(*(void **)new, '\0', size); - TRACE_EXIT 0; -} -int zft_vmalloc_once(void *new, size_t size) -{ - TRACE_FUN(ft_t_flow); - - if (*(void **)new != NULL || size == 0) { - TRACE_EXIT 0; - } - if ((*(void **)new = vmalloc(size)) == NULL) { - TRACE_EXIT -ENOMEM; - } - used_memory += size; - if (peak_memory < used_memory) { - peak_memory = used_memory; - } - TRACE_ABORT(0, ft_t_noise, - "allocated buffer @ %p, %zd bytes", *(void **)new, size); -} -int zft_vmalloc_always(void *new, size_t size) -{ - TRACE_FUN(ft_t_flow); - - zft_vfree(new, size); - TRACE_EXIT zft_vmalloc_once(new, size); -} -void zft_vfree(void *old, size_t size) -{ - TRACE_FUN(ft_t_flow); - - if (*(void **)old) { - vfree(*(void **)old); - used_memory -= size; - TRACE(ft_t_noise, "released buffer @ %p, %zd bytes", - *(void **)old, size); - *(void **)old = NULL; - } - TRACE_EXIT; -} - -void *zft_kmalloc(size_t size) -{ - void *new; - - while ((new = kmalloc(size, GFP_KERNEL)) == NULL) { - msleep_interruptible(100); - } - memset(new, 0, size); - used_memory += size; - if (peak_memory < used_memory) { - peak_memory = used_memory; - } - return new; -} - -void zft_kfree(void *old, size_t size) -{ - kfree(old); - used_memory -= size; -} - -/* there are some more buffers that are allocated on demand. - * cleanup_module() calles this function to be sure to have released - * them - */ -void zft_uninit_mem(void) -{ - TRACE_FUN(ft_t_flow); - - zft_vfree(&zft_hseg_buf, FT_SEGMENT_SIZE); - zft_vfree(&zft_deblock_buf, FT_SEGMENT_SIZE); zft_deblock_segment = -1; - zft_free_vtbl(); - if (zft_cmpr_lock(0 /* don't load */) == 0) { - (*zft_cmpr_ops->cleanup)(); - (*zft_cmpr_ops->reset)(); /* unlock it again */ - } - zft_memory_stats(); - TRACE_EXIT; -} diff --git a/drivers/char/ftape/zftape/zftape-buffers.h b/drivers/char/ftape/zftape/zftape-buffers.h deleted file mode 100644 index 798e3128c68..00000000000 --- a/drivers/char/ftape/zftape/zftape-buffers.h +++ /dev/null @@ -1,55 +0,0 @@ -#ifndef _FTAPE_DYNMEM_H -#define _FTAPE_DYNMEM_H - -/* - * Copyright (C) 1995-1997 Claus-Justus Heine. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; see the file COPYING. If not, write to - the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - - * - * $Source: /homes/cvs/ftape-stacked/ftape/zftape/zftape-buffers.h,v $ - * $Revision: 1.2 $ - * $Date: 1997/10/05 19:18:59 $ - * - * memory allocation routines. - * - */ - -/* we do not allocate all of the really large buffer memory before - * someone tries to open the drive. ftape_open() may fail with - * -ENOMEM, but that's better having 200k of vmalloced memory which - * cannot be swapped out. - */ - -extern void zft_memory_stats(void); -extern int zft_vmalloc_once(void *new, size_t size); -extern int zft_vcalloc_once(void *new, size_t size); -extern int zft_vmalloc_always(void *new, size_t size); -extern void zft_vfree(void *old, size_t size); -extern void *zft_kmalloc(size_t size); -extern void zft_kfree(void *old, size_t size); - -/* called by cleanup_module() - */ -extern void zft_uninit_mem(void); - -#endif - - - - - - - diff --git a/drivers/char/ftape/zftape/zftape-ctl.c b/drivers/char/ftape/zftape/zftape-ctl.c deleted file mode 100644 index 22ba0f5d00c..00000000000 --- a/drivers/char/ftape/zftape/zftape-ctl.c +++ /dev/null @@ -1,1417 +0,0 @@ -/* - * Copyright (C) 1996, 1997 Claus-Justus Heine - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; see the file COPYING. If not, write to - the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - - * - * $Source: /homes/cvs/ftape-stacked/ftape/zftape/zftape-ctl.c,v $ - * $Revision: 1.2.6.2 $ - * $Date: 1997/11/14 18:07:33 $ - * - * This file contains the non-read/write zftape functions - * for the QIC-40/80/3010/3020 floppy-tape driver for Linux. - */ - -#include <linux/errno.h> -#include <linux/mm.h> -#include <linux/module.h> -#include <linux/fcntl.h> - -#include <linux/zftape.h> - -#include <asm/uaccess.h> - -#include "../zftape/zftape-init.h" -#include "../zftape/zftape-eof.h" -#include "../zftape/zftape-ctl.h" -#include "../zftape/zftape-write.h" -#include "../zftape/zftape-read.h" -#include "../zftape/zftape-rw.h" -#include "../zftape/zftape-vtbl.h" - -/* Global vars. - */ -int zft_write_protected; /* this is when cartridge rdonly or O_RDONLY */ -int zft_header_read; -int zft_offline; -unsigned int zft_unit; -int zft_resid; -int zft_mt_compression; - -/* Local vars. - */ -static int going_offline; - -typedef int (mt_fun)(int *argptr); -typedef int (*mt_funp)(int *argptr); -typedef struct -{ - mt_funp function; - unsigned offline : 1; /* op permitted if offline or no_tape */ - unsigned write_protected : 1; /* op permitted if write-protected */ - unsigned not_formatted : 1; /* op permitted if tape not formatted */ - unsigned raw_mode : 1; /* op permitted if zft_mode == 0 */ - unsigned need_idle_state : 1; /* need to call def_idle_state */ - char *name; -} fun_entry; - -static mt_fun mt_dummy, mt_reset, mt_fsr, mt_bsr, mt_rew, mt_offl, mt_nop, - mt_weof, mt_erase, mt_ras2, mt_setblk, mt_setdensity, - mt_seek, mt_tell, mt_reten, mt_eom, mt_fsf, mt_bsf, - mt_fsfm, mt_bsfm, mt_setdrvbuffer, mt_compression; - -static fun_entry mt_funs[]= -{ - {mt_reset , 1, 1, 1, 1, 0, "MT_RESET" }, /* 0 */ - {mt_fsf , 0, 1, 0, 0, 1, "MT_FSF" }, - {mt_bsf , 0, 1, 0, 0, 1, "MT_BSF" }, - {mt_fsr , 0, 1, 0, 1, 1, "MT_FSR" }, - {mt_bsr , 0, 1, 0, 1, 1, "MT_BSR" }, - {mt_weof , 0, 0, 0, 0, 0, "MT_WEOF" }, /* 5 */ - {mt_rew , 0, 1, 1, 1, 0, "MT_REW" }, - {mt_offl , 0, 1, 1, 1, 0, "MT_OFFL" }, - {mt_nop , 1, 1, 1, 1, 0, "MT_NOP" }, - {mt_reten , 0, 1, 1, 1, 0, "MT_RETEN" }, - {mt_bsfm , 0, 1, 0, 0, 1, "MT_BSFM" }, /* 10 */ - {mt_fsfm , 0, 1, 0, 0, 1, "MT_FSFM" }, - {mt_eom , 0, 1, 0, 0, 1, "MT_EOM" }, - {mt_erase , 0, 0, 0, 1, 0, "MT_ERASE" }, - {mt_dummy , 1, 1, 1, 1, 0, "MT_RAS1" }, - {mt_ras2 , 0, 0, 0, 1, 0, "MT_RAS2" }, - {mt_dummy , 1, 1, 1, 1, 0, "MT_RAS3" }, - {mt_dummy , 1, 1, 1, 1, 0, "UNKNOWN" }, - {mt_dummy , 1, 1, 1, 1, 0, "UNKNOWN" }, - {mt_dummy , 1, 1, 1, 1, 0, "UNKNOWN" }, - {mt_setblk , 1, 1, 1, 1, 1, "MT_SETBLK"}, /* 20 */ - {mt_setdensity , 1, 1, 1, 1, 0, "MT_SETDENSITY"}, - {mt_seek , 0, 1, 0, 1, 1, "MT_SEEK" }, - {mt_dummy , 0, 1, 0, 1, 1, "MT_TELL" }, /* wr-only ?! */ - {mt_setdrvbuffer, 1, 1, 1, 1, 0, "MT_SETDRVBUFFER" }, - {mt_dummy , 1, 1, 1, 1, 0, "MT_FSS" }, /* 25 */ - {mt_dummy , 1, 1, 1, 1, 0, "MT_BSS" }, - {mt_dummy , 1, 1, 1, 1, 0, "MT_WSM" }, - {mt_dummy , 1, 1, 1, 1, 0, "MT_LOCK" }, - {mt_dummy , 1, 1, 1, 1, 0, "MT_UNLOCK"}, - {mt_dummy , 1, 1, 1, 1, 0, "MT_LOAD" }, /* 30 */ - {mt_dummy , 1, 1, 1, 1, 0, "MT_UNLOAD"}, - {mt_compression , 1, 1, 1, 0, 1, "MT_COMPRESSION"}, - {mt_dummy , 1, 1, 1, 1, 0, "MT_SETPART"}, - {mt_dummy , 1, 1, 1, 1, 0, "MT_MKPART"} -}; - -#define NR_MT_CMDS NR_ITEMS(mt_funs) - -void zft_reset_position(zft_position *pos) -{ - TRACE_FUN(ft_t_flow); - - pos->seg_byte_pos = - pos->volume_pos = 0; - if (zft_header_read) { - /* need to keep track of the volume table and - * compression map. We therefor simply - * position at the beginning of the first - * volume. This covers old ftape archives as - * well has various flavours of the - * compression map segments. The worst case is - * that the compression map shows up as a - * additional volume in front of all others. - */ - pos->seg_pos = zft_find_volume(0)->start_seg; - pos->tape_pos = zft_calc_tape_pos(pos->seg_pos); - } else { - pos->tape_pos = 0; - pos->seg_pos = -1; - } - zft_just_before_eof = 0; - zft_deblock_segment = -1; - zft_io_state = zft_idle; - zft_zap_read_buffers(); - zft_prevent_flush(); - /* unlock the compresison module if it is loaded. - * The zero arg means not to try to load the module. - */ - if (zft_cmpr_lock(0) == 0) { - (*zft_cmpr_ops->reset)(); /* unlock */ - } - TRACE_EXIT; -} - -static void zft_init_driver(void) -{ - TRACE_FUN(ft_t_flow); - - zft_resid = - zft_header_read = - zft_old_ftape = - zft_offline = - zft_write_protected = - going_offline = - zft_mt_compression = - zft_header_changed = - zft_volume_table_changed = - zft_written_segments = 0; - zft_blk_sz = CONFIG_ZFT_DFLT_BLK_SZ; - zft_reset_position(&zft_pos); /* does most of the stuff */ - ftape_zap_read_buffers(); - ftape_set_state(idle); - TRACE_EXIT; -} - -int zft_def_idle_state(void) -{ - int result = 0; - TRACE_FUN(ft_t_flow); - - if (!zft_header_read) { - result = zft_read_header_segments(); - } else if ((result = zft_flush_buffers()) >= 0 && zft_qic_mode) { - /* don't move past eof - */ - (void)zft_close_volume(&zft_pos); - } - if (ftape_abort_operation() < 0) { - TRACE(ft_t_warn, "ftape_abort_operation() failed"); - result = -EIO; - } - /* clear remaining read buffers */ - zft_zap_read_buffers(); - zft_io_state = zft_idle; - TRACE_EXIT result; -} - -/***************************************************************************** - * * - * functions for the MTIOCTOP commands * - * * - *****************************************************************************/ - -static int mt_dummy(int *dummy) -{ - TRACE_FUN(ft_t_flow); - - TRACE_EXIT -ENOSYS; -} - -static int mt_reset(int *dummy) -{ - TRACE_FUN(ft_t_flow); - - (void)ftape_seek_to_bot(); - TRACE_CATCH(ftape_reset_drive(), - zft_init_driver(); zft_uninit_mem(); zft_offline = 1); - /* fake a re-open of the device. This will set all flage and - * allocate buffers as appropriate. The new tape condition will - * force the open routine to do anything we need. - */ - TRACE_CATCH(_zft_open(-1 /* fake reopen */, 0 /* dummy */),); - TRACE_EXIT 0; -} - -static int mt_fsf(int *arg) -{ - int result; - TRACE_FUN(ft_t_flow); - - result = zft_skip_volumes(*arg, &zft_pos); - zft_just_before_eof = 0; - TRACE_EXIT result; -} - -static int mt_bsf(int *arg) -{ - int result = 0; - TRACE_FUN(ft_t_flow); - - if (*arg != 0) { - result = zft_skip_volumes(-*arg + 1, &zft_pos); - } - TRACE_EXIT result; -} - -static int seek_block(__s64 data_offset, - __s64 block_increment, - zft_position *pos) -{ - int result = 0; - __s64 new_block_pos; - __s64 vol_block_count; - const zft_volinfo *volume; - int exceed; - TRACE_FUN(ft_t_flow); - - volume = zft_find_volume(pos->seg_pos); - if (volume->start_seg == 0 || volume->end_seg == 0) { - TRACE_EXIT -EIO; - } - new_block_pos = (zft_div_blksz(data_offset, volume->blk_sz) - + block_increment); - vol_block_count = zft_div_blksz(volume->size, volume->blk_sz); - if (new_block_pos < 0) { - TRACE(ft_t_noise, - "new_block_pos " LL_X " < 0", LL(new_block_pos)); - zft_resid = (int)new_block_pos; - new_block_pos = 0; - exceed = 1; - } else if (new_block_pos > vol_block_count) { - TRACE(ft_t_noise, - "new_block_pos " LL_X " exceeds size of volume " LL_X, - LL(new_block_pos), LL(vol_block_count)); - zft_resid = (int)(vol_block_count - new_block_pos); - new_block_pos = vol_block_count; - exceed = 1; - } else { - exceed = 0; - } - if (zft_use_compression && volume->use_compression) { - TRACE_CATCH(zft_cmpr_lock(1 /* try to load */),); - result = (*zft_cmpr_ops->seek)(new_block_pos, pos, volume, - zft_deblock_buf); - pos->tape_pos = zft_calc_tape_pos(pos->seg_pos); - pos->tape_pos += pos->seg_byte_pos; - } else { - pos->volume_pos = zft_mul_blksz(new_block_pos, volume->blk_sz); - pos->tape_pos = zft_calc_tape_pos(volume->start_seg); - pos->tape_pos += pos->volume_pos; - pos->seg_pos = zft_calc_seg_byte_coord(&pos->seg_byte_pos, - pos->tape_pos); - } - zft_just_before_eof = volume->size == pos->volume_pos; - if (zft_just_before_eof) { - /* why this? because zft_file_no checks agains start - * and end segment of a volume. We do not want to - * advance to the next volume with this function. - */ - TRACE(ft_t_noise, "set zft_just_before_eof"); - zft_position_before_eof(pos, volume); - } - TRACE(ft_t_noise, "\n" - KERN_INFO "new_seg_pos : %d\n" - KERN_INFO "new_tape_pos: " LL_X "\n" - KERN_INFO "vol_size : " LL_X "\n" - KERN_INFO "seg_byte_pos: %d\n" - KERN_INFO "blk_sz : %d", - pos->seg_pos, LL(pos->tape_pos), - LL(volume->size), pos->seg_byte_pos, - volume->blk_sz); - if (!exceed) { - zft_resid = new_block_pos - zft_div_blksz(pos->volume_pos, - volume->blk_sz); - } - if (zft_resid < 0) { - zft_resid = -zft_resid; - } - TRACE_EXIT ((exceed || zft_resid != 0) && result >= 0) ? -EINVAL : result; -} - -static int mt_fsr(int *arg) -{ - int result; - TRACE_FUN(ft_t_flow); - - result = seek_block(zft_pos.volume_pos, *arg, &zft_pos); - TRACE_EXIT result; -} - -static int mt_bsr(int *arg) -{ - int result; - TRACE_FUN(ft_t_flow); - - result = seek_block(zft_pos.volume_pos, -*arg, &zft_pos); - TRACE_EXIT result; -} - -static int mt_weof(int *arg) -{ - int result; - TRACE_FUN(ft_t_flow); - - TRACE_CATCH(zft_flush_buffers(),); - result = zft_weof(*arg, &zft_pos); - TRACE_EXIT result; -} - -static int mt_rew(int *dummy) -{ - int result; - TRACE_FUN(ft_t_flow); - - if(zft_header_read) { - (void)zft_def_idle_state(); - } - result = ftape_seek_to_bot(); - zft_reset_position(&zft_pos); - TRACE_EXIT result; -} - -static int mt_offl(int *dummy) -{ - int result; - TRACE_FUN(ft_t_flow); - - going_offline= 1; - result = mt_rew(NULL); - TRACE_EXIT result; -} - -static int mt_nop(int *dummy) -{ - TRACE_FUN(ft_t_flow); - /* should we set tape status? - */ - if (!zft_offline) { /* offline includes no_tape */ - (void)zft_def_idle_state(); - } - TRACE_EXIT 0; -} - -static int mt_reten(int *dummy) -{ - int result; - TRACE_FUN(ft_t_flow); - - if(zft_header_read) { - (void)zft_def_idle_state(); - } - result = ftape_seek_to_eot(); - if (result >= 0) { - result = ftape_seek_to_bot(); - } - TRACE_EXIT(result); -} - -static int fsfbsfm(int arg, zft_position *pos) -{ - const zft_volinfo *vtbl; - __s64 block_pos; - TRACE_FUN(ft_t_flow); - - /* What to do? This should seek to the next file-mark and - * position BEFORE. That is, a next write would just extend - * the current file. Well. Let's just seek to the end of the - * current file, if count == 1. If count > 1, then do a - * "mt_fsf(count - 1)", and then seek to the end of that file. - * If count == 0, do nothing - */ - if (arg == 0) { - TRACE_EXIT 0; - } - zft_just_before_eof = 0; - TRACE_CATCH(zft_skip_volumes(arg < 0 ? arg : arg-1, pos), - if (arg > 0) { - zft_resid ++; - }); - vtbl = zft_find_volume(pos->seg_pos); - block_pos = zft_div_blksz(vtbl->size, vtbl->blk_sz); - (void)seek_block(0, block_pos, pos); - if (pos->volume_pos != vtbl->size) { - zft_just_before_eof = 0; - zft_resid = 1; - /* we didn't managed to go there */ - TRACE_ABORT(-EIO, ft_t_err, - "wanted file position " LL_X ", arrived at " LL_X, - LL(vtbl->size), LL(pos->volume_pos)); - } - zft_just_before_eof = 1; - TRACE_EXIT 0; -} - -static int mt_bsfm(int *arg) -{ - int result; - TRACE_FUN(ft_t_flow); - - result = fsfbsfm(-*arg, &zft_pos); - TRACE_EXIT result; -} - -static int mt_fsfm(int *arg) -{ - int result; - TRACE_FUN(ft_t_flow); - - result = fsfbsfm(*arg, &zft_pos); - TRACE_EXIT result; -} - -static int mt_eom(int *dummy) -{ - TRACE_FUN(ft_t_flow); - - zft_skip_to_eom(&zft_pos); - TRACE_EXIT 0; -} - -static int mt_erase(int *dummy) -{ - int result; - TRACE_FUN(ft_t_flow); - - result = zft_erase(); - TRACE_EXIT result; -} - -static int mt_ras2(int *dummy) -{ - int result; - TRACE_FUN(ft_t_flow); - - result = -ENOSYS; - TRACE_EXIT result; -} - -/* Sets the new blocksize in BYTES - * - */ -static int mt_setblk(int *new_size) -{ - TRACE_FUN(ft_t_flow); - - if((unsigned int)(*new_size) > ZFT_MAX_BLK_SZ) { - TRACE_ABORT(-EINVAL, ft_t_info, - "desired blk_sz (%d) should be <= %d bytes", - *new_size, ZFT_MAX_BLK_SZ); - } - if ((*new_size & (FT_SECTOR_SIZE-1)) != 0) { - TRACE_ABORT(-EINVAL, ft_t_info, - "desired blk_sz (%d) must be a multiple of %d bytes", - *new_size, FT_SECTOR_SIZE); - } - if (*new_size == 0) { - if (zft_use_compression) { - TRACE_ABORT(-EINVAL, ft_t_info, - "Variable block size not yet " - "supported with compression"); - } - *new_size = 1; - } - zft_blk_sz = *new_size; - TRACE_EXIT 0; -} - -static int mt_setdensity(int *arg) -{ - TRACE_FUN(ft_t_flow); - - SET_TRACE_LEVEL(*arg); - TRACE(TRACE_LEVEL, "tracing set to %d", TRACE_LEVEL); - if ((int)TRACE_LEVEL != *arg) { - TRACE_EXIT -EINVAL; - } - TRACE_EXIT 0; -} - -static int mt_seek(int *new_block_pos) -{ - int result= 0; - TRACE_FUN(ft_t_any); - - result = seek_block(0, (__s64)*new_block_pos, &zft_pos); - TRACE_EXIT result; -} - -/* OK, this is totally different from SCSI, but the worst thing that can - * happen is that there is not enough defragmentated memory that can be - * allocated. Also, there is a hardwired limit of 16 dma buffers in the - * stock ftape module. This shouldn't bring the system down. - * - * NOTE: the argument specifies the total number of dma buffers to use. - * The driver needs at least 3 buffers to function at all. - * - */ -static int mt_setdrvbuffer(int *cnt) -{ - TRACE_FUN(ft_t_flow); - - if (*cnt < 3) { - TRACE_EXIT -EINVAL; - } - TRACE_CATCH(ftape_set_nr_buffers(*cnt),); - TRACE_EXIT 0; -} -/* return the block position from start of volume - */ -static int mt_tell(int *arg) -{ - TRACE_FUN(ft_t_flow); - - *arg = zft_div_blksz(zft_pos.volume_pos, - zft_find_volume(zft_pos.seg_pos)->blk_sz); - TRACE_EXIT 0; -} - -static int mt_compression(int *arg) -{ - TRACE_FUN(ft_t_flow); - - /* Ok. We could also check whether compression is available at - * all by trying to load the compression module. We could - * also check for a block size of 1 byte which is illegal - * with compression. Instead of doing it here we rely on - * zftape_write() to do the proper checks. - */ - if ((unsigned int)*arg > 1) { - TRACE_EXIT -EINVAL; - } - if (*arg != 0 && zft_blk_sz == 1) { /* variable block size */ - TRACE_ABORT(-EINVAL, ft_t_info, - "Compression not yet supported " - "with variable block size"); - } - zft_mt_compression = *arg; - if ((zft_unit & ZFT_ZIP_MODE) == 0) { - zft_use_compression = zft_mt_compression; - } - TRACE_EXIT 0; -} - -/* check whether write access is allowed. Write access is denied when - * + zft_write_protected == 1 -- this accounts for either hard write - * protection of the cartridge or for - * O_RDONLY access mode of the tape device - * + zft_offline == 1 -- this meany that there is either no tape - * or that the MTOFFLINE ioctl has been - * previously issued (`soft eject') - * + ft_formatted == 0 -- this means that the cartridge is not - * formatted - * Then we distinuguish two cases. When zft_qic_mode is TRUE, then we try - * to emulate a `traditional' (aka SCSI like) UN*X tape device. Therefore we - * deny writes when - * + zft_qic_mode ==1 && - * (!zft_tape_at_lbot() && -- tape no at logical BOT - * !(zft_tape_at_eom() || -- tape not at logical EOM (or EOD) - * (zft_tape_at_eom() && - * zft_old_ftape()))) -- we can't add new volume to tapes - * written by old ftape because ftape - * don't use the volume table - * - * when the drive is in true raw mode (aka /dev/rawft0) then we don't - * care about LBOT and EOM conditions. This device is intended for a - * user level program that wants to truly implement the QIC-80 compliance - * at the logical data layout level of the cartridge, i.e. implement all - * that volume table and volume directory stuff etc.< - */ -int zft_check_write_access(zft_position *pos) -{ - TRACE_FUN(ft_t_flow); - - if (zft_offline) { /* offline includes no_tape */ - TRACE_ABORT(-ENXIO, - ft_t_info, "tape is offline or no cartridge"); - } - if (!ft_formatted) { - TRACE_ABORT(-EACCES, ft_t_info, "tape is not formatted"); - } - if (zft_write_protected) { - TRACE_ABORT(-EACCES, ft_t_info, "cartridge write protected"); - } - if (zft_qic_mode) { - /* check BOT condition */ - if (!zft_tape_at_lbot(pos)) { - /* protect cartridges written by old ftape if - * not at BOT because they use the vtbl - * segment for storing data - */ - if (zft_old_ftape) { - TRACE_ABORT(-EACCES, ft_t_warn, - "Cannot write to cartridges written by old ftape when not at BOT"); - } - /* not at BOT, but allow writes at EOD, of course - */ - if (!zft_tape_at_eod(pos)) { - TRACE_ABORT(-EACCES, ft_t_info, - "tape not at BOT and not at EOD"); - } - } - /* fine. Now the tape is either at BOT or at EOD. */ - } - /* or in raw mode in which case we don't care about BOT and EOD */ - TRACE_EXIT 0; -} - -/* OPEN routine called by kernel-interface code - * - * NOTE: this is also called by mt_reset() with dev_minor == -1 - * to fake a reopen after a reset. - */ -int _zft_open(unsigned int dev_minor, unsigned int access_mode) -{ - static unsigned int tape_unit; - static unsigned int file_access_mode; - int result; - TRACE_FUN(ft_t_flow); - - if ((int)dev_minor == -1) { - /* fake reopen */ - zft_unit = tape_unit; - access_mode = file_access_mode; - zft_init_driver(); /* reset all static data to defaults */ - } else { - tape_unit = dev_minor; - file_access_mode = access_mode; - if ((result = ftape_enable(FTAPE_SEL(dev_minor))) < 0) { - TRACE_ABORT(-ENXIO, ft_t_err, - "ftape_enable failed: %d", result); - } - if (ft_new_tape || ft_no_tape || !ft_formatted || - (FTAPE_SEL(zft_unit) != FTAPE_SEL(dev_minor)) || - (zft_unit & ZFT_RAW_MODE) != (dev_minor & ZFT_RAW_MODE)) { - /* reset all static data to defaults, - */ - zft_init_driver(); - } - zft_unit = dev_minor; - } - zft_set_flags(zft_unit); /* decode the minor bits */ - if (zft_blk_sz == 1 && zft_use_compression) { - ftape_disable(); /* resets ft_no_tape */ - TRACE_ABORT(-ENODEV, ft_t_warn, "Variable block size not yet " - "supported with compression"); - } - /* no need for most of the buffers when no tape or not - * formatted. for the read/write operations, it is the - * regardless whether there is no tape, a not-formatted tape - * or the whether the driver is soft offline. - * Nevertheless we allow some ioctls with non-formatted tapes, - * like rewind and reset. - */ - if (ft_no_tape || !ft_formatted) { - zft_uninit_mem(); - } - if (ft_no_tape) { - zft_offline = 1; /* so we need not test two variables */ - } - if ((access_mode == O_WRONLY || access_mode == O_RDWR) && - (ft_write_protected || ft_no_tape)) { - ftape_disable(); /* resets ft_no_tape */ - TRACE_ABORT(ft_no_tape ? -ENXIO : -EROFS, - ft_t_warn, "wrong access mode %s cartridge", - ft_no_tape ? "without a" : "with write protected"); - } - zft_write_protected = (access_mode == O_RDONLY || - ft_write_protected != 0); - if (zft_write_protected) { - TRACE(ft_t_noise, - "read only access mode: %d, " - "drive write protected: %d", - access_mode == O_RDONLY, - ft_write_protected != 0); - } - if (!zft_offline) { - TRACE_CATCH(zft_vmalloc_once(&zft_deblock_buf,FT_SEGMENT_SIZE), - ftape_disable()); - } - /* zft_seg_pos should be greater than the vtbl segpos but not - * if in compatibility mode and only after we read in the - * header segments - * - * might also be a problem if the user makes a backup with a - * *qft* device and rewinds it with a raw device. - */ - if (zft_qic_mode && - !zft_old_ftape && - zft_pos.seg_pos >= 0 && - zft_header_read && - zft_pos.seg_pos <= ft_first_data_segment) { - TRACE(ft_t_noise, "you probably mixed up the zftape devices!"); - zft_reset_position(&zft_pos); - } - TRACE_EXIT 0; -} - -/* RELEASE routine called by kernel-interface code - */ -int _zft_close(void) -{ - int result = 0; - TRACE_FUN(ft_t_flow); - - if (zft_offline) { - /* call the hardware release routine. Puts the drive offline */ - ftape_disable(); - TRACE_EXIT 0; - } - if (!(ft_write_protected || zft_old_ftape)) { - result = zft_flush_buffers(); - TRACE(ft_t_noise, "writing file mark at current position"); - if (zft_qic_mode && zft_close_volume(&zft_pos) == 0) { - zft_move_past_eof(&zft_pos); - } - if ((zft_tape_at_lbot(&zft_pos) || - !(zft_unit & FTAPE_NO_REWIND))) { - if (result >= 0) { - result = zft_update_header_segments(); - } else { - TRACE(ft_t_err, - "Error: unable to update header segments"); - } - } - } - ftape_abort_operation(); - if (!(zft_unit & FTAPE_NO_REWIND)) { - TRACE(ft_t_noise, "rewinding tape"); - if (ftape_seek_to_bot() < 0 && result >= 0) { - result = -EIO; /* keep old value */ - } - zft_reset_position(&zft_pos); - } - zft_zap_read_buffers(); - /* now free up memory as much as possible. We don't destroy - * the deblock buffer if it containes a valid segment. - */ - if (zft_deblock_segment == -1) { - zft_vfree(&zft_deblock_buf, FT_SEGMENT_SIZE); - } - /* high level driver status, forces creation of a new volume - * when calling ftape_write again and not zft_just_before_eof - */ - zft_io_state = zft_idle; - if (going_offline) { - zft_init_driver(); - zft_uninit_mem(); - going_offline = 0; - zft_offline = 1; - } else if (zft_cmpr_lock(0 /* don't load */) == 0) { - (*zft_cmpr_ops->reset)(); /* unlock it again */ - } - zft_memory_stats(); - /* call the hardware release routine. Puts the drive offline */ - ftape_disable(); - TRACE_EXIT result; -} - -/* - * the wrapper function around the wrapper MTIOCTOP ioctl - */ -static int mtioctop(struct mtop *mtop, int arg_size) -{ - int result = 0; - fun_entry *mt_fun_entry; - TRACE_FUN(ft_t_flow); - - if (arg_size != sizeof(struct mtop) || mtop->mt_op >= NR_MT_CMDS) { - TRACE_EXIT -EINVAL; - } - TRACE(ft_t_noise, "calling MTIOCTOP command: %s", - mt_funs[mtop->mt_op].name); - mt_fun_entry= &mt_funs[mtop->mt_op]; - zft_resid = mtop->mt_count; - if (!mt_fun_entry->offline && zft_offline) { - if (ft_no_tape) { - TRACE_ABORT(-ENXIO, ft_t_info, "no tape present"); - } else { - TRACE_ABORT(-ENXIO, ft_t_info, "drive is offline"); - } - } - if (!mt_fun_entry->not_formatted && !ft_formatted) { - TRACE_ABORT(-EACCES, ft_t_info, "tape is not formatted"); - } - if (!mt_fun_entry->write_protected) { - TRACE_CATCH(zft_check_write_access(&zft_pos),); - } - if (mt_fun_entry->need_idle_state && !(zft_offline || !ft_formatted)) { - TRACE_CATCH(zft_def_idle_state(),); - } - if (!zft_qic_mode && !mt_fun_entry->raw_mode) { - TRACE_ABORT(-EACCES, ft_t_info, -"Drive needs to be in QIC-80 compatibility mode for this command"); - } - result = (mt_fun_entry->function)(&mtop->mt_count); - if (zft_tape_at_lbot(&zft_pos)) { - TRACE_CATCH(zft_update_header_segments(),); - } - if (result >= 0) { - zft_resid = 0; - } - TRACE_EXIT result; -} - -/* - * standard MTIOCGET ioctl - */ -static int mtiocget(struct mtget *mtget, int arg_size) -{ - const zft_volinfo *volume; - __s64 max_tape_pos; - TRACE_FUN(ft_t_flow); - - if (arg_size != sizeof(struct mtget)) { - TRACE_ABORT(-EINVAL, ft_t_info, "bad argument size: %d", - arg_size); - } - mtget->mt_type = ft_drive_type.vendor_id + 0x800000; - mtget->mt_dsreg = ft_last_status.space; - mtget->mt_erreg = ft_last_error.space; /* error register */ - mtget->mt_resid = zft_resid; /* residuum of writes, reads and - * MTIOCTOP commands - */ - if (!zft_offline) { /* neither no_tape nor soft offline */ - mtget->mt_gstat = GMT_ONLINE(~0UL); - /* should rather return the status of the cartridge - * than the access mode of the file, therefor use - * ft_write_protected, not zft_write_protected - */ - if (ft_write_protected) { - mtget->mt_gstat |= GMT_WR_PROT(~0UL); - } - if(zft_header_read) { /* this catches non-formatted */ - volume = zft_find_volume(zft_pos.seg_pos); - mtget->mt_fileno = volume->count; - max_tape_pos = zft_capacity - zft_blk_sz; - if (zft_use_compression) { - max_tape_pos -= ZFT_CMPR_OVERHEAD; - } - if (zft_tape_at_eod(&zft_pos)) { - mtget->mt_gstat |= GMT_EOD(~0UL); - } - if (zft_pos.tape_pos > max_tape_pos) { - mtget->mt_gstat |= GMT_EOT(~0UL); - } - mtget->mt_blkno = zft_div_blksz(zft_pos.volume_pos, - volume->blk_sz); - if (zft_just_before_eof) { - mtget->mt_gstat |= GMT_EOF(~0UL); - } - if (zft_tape_at_lbot(&zft_pos)) { - mtget->mt_gstat |= GMT_BOT(~0UL); - } - } else { - mtget->mt_fileno = mtget->mt_blkno = -1; - if (mtget->mt_dsreg & QIC_STATUS_AT_BOT) { - mtget->mt_gstat |= GMT_BOT(~0UL); - } - } - } else { - if (ft_no_tape) { - mtget->mt_gstat = GMT_DR_OPEN(~0UL); - } else { - mtget->mt_gstat = 0UL; - } - mtget->mt_fileno = mtget->mt_blkno = -1; - } - TRACE_EXIT 0; -} - -#ifdef MTIOCRDFTSEG -/* - * Read a floppy tape segment. This is useful for manipulating the - * volume table, and read the old header segment before re-formatting - * the cartridge. - */ -static int mtiocrdftseg(struct mtftseg * mtftseg, int arg_size) -{ - TRACE_FUN(ft_t_flow); - - TRACE(ft_t_noise, "Mag tape ioctl command: MTIOCRDFTSEG"); - if (zft_qic_mode) { - TRACE_ABORT(-EACCES, ft_t_info, - "driver needs to be in raw mode for this ioctl"); - } - if (arg_size != sizeof(struct mtftseg)) { - TRACE_ABORT(-EINVAL, ft_t_info, "bad argument size: %d", - arg_size); - } - if (zft_offline) { - TRACE_EXIT -ENXIO; - } - if (mtftseg->mt_mode != FT_RD_SINGLE && - mtftseg->mt_mode != FT_RD_AHEAD) { - TRACE_ABORT(-EINVAL, ft_t_info, "invalid read mode"); - } - if (!ft_formatted) { - TRACE_EXIT -EACCES; /* -ENXIO ? */ - - } - if (!zft_header_read) { - TRACE_CATCH(zft_def_idle_state(),); - } - if (mtftseg->mt_segno > ft_last_data_segment) { - TRACE_ABORT(-EINVAL, ft_t_info, "segment number is too large"); - } - mtftseg->mt_result = ftape_read_segment(mtftseg->mt_segno, - zft_deblock_buf, - mtftseg->mt_mode); - if (mtftseg->mt_result < 0) { - /* a negativ result is not an ioctl error. if - * the user wants to read damaged tapes, - * it's up to her/him - */ - TRACE_EXIT 0; - } - if (copy_to_user(mtftseg->mt_data, - zft_deblock_buf, - mtftseg->mt_result) != 0) { - TRACE_EXIT -EFAULT; - } - TRACE_EXIT 0; -} -#endif - -#ifdef MTIOCWRFTSEG -/* - * write a floppy tape segment. This version features writing of - * deleted address marks, and gracefully ignores the (software) - * ft_formatted flag to support writing of header segments after - * formatting. - */ -static int mtiocwrftseg(struct mtftseg * mtftseg, int arg_size) -{ - int result; - TRACE_FUN(ft_t_flow); - - TRACE(ft_t_noise, "Mag tape ioctl command: MTIOCWRFTSEG"); - if (zft_write_protected || zft_qic_mode) { - TRACE_EXIT -EACCES; - } - if (arg_size != sizeof(struct mtftseg)) { - TRACE_ABORT(-EINVAL, ft_t_info, "bad argument size: %d", - arg_size); - } - if (zft_offline) { - TRACE_EXIT -ENXIO; - } - if (mtftseg->mt_mode != FT_WR_ASYNC && - mtftseg->mt_mode != FT_WR_MULTI && - mtftseg->mt_mode != FT_WR_SINGLE && - mtftseg->mt_mode != FT_WR_DELETE) { - TRACE_ABORT(-EINVAL, ft_t_info, "invalid write mode"); - } - /* - * We don't check for ft_formatted, because this gives - * only the software status of the driver. - * - * We assume that the user knows what it is - * doing. And rely on the low level stuff to fail - * when the tape isn't formatted. We only make sure - * that The header segment buffer is allocated, - * because it holds the bad sector map. - */ - if (zft_hseg_buf == NULL) { - TRACE_EXIT -ENXIO; - } - if (mtftseg->mt_mode != FT_WR_DELETE) { - if (copy_from_user(zft_deblock_buf, - mtftseg->mt_data, - FT_SEGMENT_SIZE) != 0) { - TRACE_EXIT -EFAULT; - } - } - mtftseg->mt_result = ftape_write_segment(mtftseg->mt_segno, - zft_deblock_buf, - mtftseg->mt_mode); - if (mtftseg->mt_result >= 0 && mtftseg->mt_mode == FT_WR_SINGLE) { - /* - * a negativ result is not an ioctl error. if - * the user wants to write damaged tapes, - * it's up to her/him - */ - if ((result = ftape_loop_until_writes_done()) < 0) { - mtftseg->mt_result = result; - } - } - TRACE_EXIT 0; -} -#endif - -#ifdef MTIOCVOLINFO -/* - * get information about volume positioned at. - */ -static int mtiocvolinfo(struct mtvolinfo *volinfo, int arg_size) -{ - const zft_volinfo *volume; - TRACE_FUN(ft_t_flow); - - TRACE(ft_t_noise, "Mag tape ioctl command: MTIOCVOLINFO"); - if (arg_size != sizeof(struct mtvolinfo)) { - TRACE_ABORT(-EINVAL, - ft_t_info, "bad argument size: %d", arg_size); - } - if (zft_offline) { - TRACE_EXIT -ENXIO; - } - if (!ft_formatted) { - TRACE_EXIT -EACCES; - } - TRACE_CATCH(zft_def_idle_state(),); - volume = zft_find_volume(zft_pos.seg_pos); - volinfo->mt_volno = volume->count; - volinfo->mt_blksz = volume->blk_sz == 1 ? 0 : volume->blk_sz; - volinfo->mt_size = volume->size >> 10; - volinfo->mt_rawsize = ((zft_calc_tape_pos(volume->end_seg + 1) >> 10) - - (zft_calc_tape_pos(volume->start_seg) >> 10)); - volinfo->mt_cmpr = volume->use_compression; - TRACE_EXIT 0; -} -#endif - -#ifdef ZFT_OBSOLETE -static int mtioc_zftape_getblksz(struct mtblksz *blksz, int arg_size) -{ - TRACE_FUN(ft_t_flow); - - TRACE(ft_t_noise, "\n" - KERN_INFO "Mag tape ioctl command: MTIOC_ZTAPE_GETBLKSZ\n" - KERN_INFO "This ioctl is here merely for compatibility.\n" - KERN_INFO "Please use MTIOCVOLINFO instead"); - if (arg_size != sizeof(struct mtblksz)) { - TRACE_ABORT(-EINVAL, - ft_t_info, "bad argument size: %d", arg_size); - } - if (zft_offline) { - TRACE_EXIT -ENXIO; - } - if (!ft_formatted) { - TRACE_EXIT -EACCES; - } - TRACE_CATCH(zft_def_idle_state(),); - blksz->mt_blksz = zft_find_volume(zft_pos.seg_pos)->blk_sz; - TRACE_EXIT 0; -} -#endif - -#ifdef MTIOCGETSIZE -/* - * get the capacity of the tape cartridge. - */ -static int mtiocgetsize(struct mttapesize *size, int arg_size) -{ - TRACE_FUN(ft_t_flow); - - TRACE(ft_t_noise, "Mag tape ioctl command: MTIOC_ZFTAPE_GETSIZE"); - if (arg_size != sizeof(struct mttapesize)) { - TRACE_ABORT(-EINVAL, - ft_t_info, "bad argument size: %d", arg_size); - } - if (zft_offline) { - TRACE_EXIT -ENXIO; - } - if (!ft_formatted) { - TRACE_EXIT -EACCES; - } - TRACE_CATCH(zft_def_idle_state(),); - size->mt_capacity = (unsigned int)(zft_capacity>>10); - size->mt_used = (unsigned int)(zft_get_eom_pos()>>10); - TRACE_EXIT 0; -} -#endif - -static int mtiocpos(struct mtpos *mtpos, int arg_size) -{ - int result; - TRACE_FUN(ft_t_flow); - - TRACE(ft_t_noise, "Mag tape ioctl command: MTIOCPOS"); - if (arg_size != sizeof(struct mtpos)) { - TRACE_ABORT(-EINVAL, - ft_t_info, "bad argument size: %d", arg_size); - } - result = mt_tell((int *)&mtpos->mt_blkno); - TRACE_EXIT result; -} - -#ifdef MTIOCFTFORMAT -/* - * formatting of floppy tape cartridges. This is intended to be used - * together with the MTIOCFTCMD ioctl and the new mmap feature - */ - -/* - * This function uses ftape_decode_header_segment() to inform the low - * level ftape module about the new parameters. - * - * It erases the hseg_buf. The calling process must specify all - * parameters to assure proper operation. - * - * return values: -EINVAL - wrong argument size - * -EINVAL - if ftape_decode_header_segment() failed. - */ -static int set_format_parms(struct ftfmtparms *p, __u8 *hseg_buf) -{ - ft_trace_t old_level = TRACE_LEVEL; - TRACE_FUN(ft_t_flow); - - TRACE(ft_t_noise, "MTIOCFTFORMAT operation FTFMT_SETPARMS"); - memset(hseg_buf, 0, FT_SEGMENT_SIZE); - PUT4(hseg_buf, FT_SIGNATURE, FT_HSEG_MAGIC); - - /* fill in user specified parameters - */ - hseg_buf[FT_FMT_CODE] = (__u8)p->ft_fmtcode; - PUT2(hseg_buf, FT_SPT, p->ft_spt); - hseg_buf[FT_TPC] = (__u8)p->ft_tpc; - hseg_buf[FT_FHM] = (__u8)p->ft_fhm; - hseg_buf[FT_FTM] = (__u8)p->ft_ftm; - - /* fill in sane defaults to make ftape happy. - */ - hseg_buf[FT_FSM] = (__u8)128; /* 128 is hard wired all over ftape */ - if (p->ft_fmtcode == fmt_big) { - PUT4(hseg_buf, FT_6_HSEG_1, 0); - PUT4(hseg_buf, FT_6_HSEG_2, 1); - PUT4(hseg_buf, FT_6_FRST_SEG, 2); - PUT4(hseg_buf, FT_6_LAST_SEG, p->ft_spt * p->ft_tpc - 1); - } else { - PUT2(hseg_buf, FT_HSEG_1, 0); - PUT2(hseg_buf, FT_HSEG_2, 1); - PUT2(hseg_buf, FT_FRST_SEG, 2); - PUT2(hseg_buf, FT_LAST_SEG, p->ft_spt * p->ft_tpc - 1); - } - - /* Synchronize with the low level module. This is particularly - * needed for unformatted cartridges as the QIC std was previously - * unknown BUT is needed to set data rate and to calculate timeouts. - */ - TRACE_CATCH(ftape_calibrate_data_rate(p->ft_qicstd&QIC_TAPE_STD_MASK), - _res = -EINVAL); - - /* The following will also recalcualte the timeouts for the tape - * length and QIC std we want to format to. - * abort with -EINVAL rather than -EIO - */ - SET_TRACE_LEVEL(ft_t_warn); - TRACE_CATCH(ftape_decode_header_segment(hseg_buf), - SET_TRACE_LEVEL(old_level); _res = -EINVAL); - SET_TRACE_LEVEL(old_level); - TRACE_EXIT 0; -} - -/* - * Return the internal SOFTWARE status of the kernel driver. This does - * NOT query the tape drive about its status. - */ -static int get_format_parms(struct ftfmtparms *p, __u8 *hseg_buffer) -{ - TRACE_FUN(ft_t_flow); - - TRACE(ft_t_noise, "MTIOCFTFORMAT operation FTFMT_GETPARMS"); - p->ft_qicstd = ft_qic_std; - p->ft_fmtcode = ft_format_code; - p->ft_fhm = hseg_buffer[FT_FHM]; - p->ft_ftm = hseg_buffer[FT_FTM]; - p->ft_spt = ft_segments_per_track; - p->ft_tpc = ft_tracks_per_tape; - TRACE_EXIT 0; -} - -static int mtiocftformat(struct mtftformat *mtftformat, int arg_size) -{ - int result; - union fmt_arg *arg = &mtftformat->fmt_arg; - TRACE_FUN(ft_t_flow); - - TRACE(ft_t_noise, "Mag tape ioctl command: MTIOCFTFORMAT"); - if (zft_offline) { - if (ft_no_tape) { - TRACE_ABORT(-ENXIO, ft_t_info, "no tape present"); - } else { - TRACE_ABORT(-ENXIO, ft_t_info, "drive is offline"); - } - } - if (zft_qic_mode) { - TRACE_ABORT(-EACCES, ft_t_info, - "driver needs to be in raw mode for this ioctl"); - } - if (zft_hseg_buf == NULL) { - TRACE_CATCH(zft_vcalloc_once(&zft_hseg_buf, FT_SEGMENT_SIZE),); - } - zft_header_read = 0; - switch(mtftformat->fmt_op) { - case FTFMT_SET_PARMS: - TRACE_CATCH(set_format_parms(&arg->fmt_parms, zft_hseg_buf),); - TRACE_EXIT 0; - case FTFMT_GET_PARMS: - TRACE_CATCH(get_format_parms(&arg->fmt_parms, zft_hseg_buf),); - TRACE_EXIT 0; - case FTFMT_FORMAT_TRACK: - if ((ft_formatted && zft_check_write_access(&zft_pos) < 0) || - (!ft_formatted && zft_write_protected)) { - TRACE_ABORT(-EACCES, ft_t_info, "Write access denied"); - } - TRACE_CATCH(ftape_format_track(arg->fmt_track.ft_track, - arg->fmt_track.ft_gap3),); - TRACE_EXIT 0; - case FTFMT_STATUS: - TRACE_CATCH(ftape_format_status(&arg->fmt_status.ft_segment),); - TRACE_EXIT 0; - case FTFMT_VERIFY: - TRACE_CATCH(ftape_verify_segment(arg->fmt_verify.ft_segment, - (SectorMap *)&arg->fmt_verify.ft_bsm),); - TRACE_EXIT 0; - default: - TRACE_ABORT(-EINVAL, ft_t_err, "Invalid format operation"); - } - TRACE_EXIT result; -} -#endif - -#ifdef MTIOCFTCMD -/* - * send a QIC-117 command to the drive, with optional timeouts, - * parameter and result bits. This is intended to be used together - * with the formatting ioctl. - */ -static int mtiocftcmd(struct mtftcmd *ftcmd, int arg_size) -{ - int i; - TRACE_FUN(ft_t_flow); - - TRACE(ft_t_noise, "Mag tape ioctl command: MTIOCFTCMD"); - if (!capable(CAP_SYS_ADMIN)) { - TRACE_ABORT(-EPERM, ft_t_info, - "need CAP_SYS_ADMIN capability to send raw qic-117 commands"); - } - if (zft_qic_mode) { - TRACE_ABORT(-EACCES, ft_t_info, - "driver needs to be in raw mode for this ioctl"); - } - if (arg_size != sizeof(struct mtftcmd)) { - TRACE_ABORT(-EINVAL, - ft_t_info, "bad argument size: %d", arg_size); - } - if (ftcmd->ft_wait_before) { - TRACE_CATCH(ftape_ready_wait(ftcmd->ft_wait_before, - &ftcmd->ft_status),); - } - if (ftcmd->ft_status & QIC_STATUS_ERROR) - goto ftmtcmd_error; - if (ftcmd->ft_result_bits != 0) { - TRACE_CATCH(ftape_report_operation(&ftcmd->ft_result, - ftcmd->ft_cmd, - ftcmd->ft_result_bits),); - } else { - TRACE_CATCH(ftape_command(ftcmd->ft_cmd),); - if (ftcmd->ft_status & QIC_STATUS_ERROR) - goto ftmtcmd_error; - for (i = 0; i < ftcmd->ft_parm_cnt; i++) { - TRACE_CATCH(ftape_parameter(ftcmd->ft_parms[i]&0x0f),); - if (ftcmd->ft_status & QIC_STATUS_ERROR) - goto ftmtcmd_error; - } - } - if (ftcmd->ft_wait_after != 0) { - TRACE_CATCH(ftape_ready_wait(ftcmd->ft_wait_after, - &ftcmd->ft_status),); - } -ftmtcmd_error: - if (ftcmd->ft_status & QIC_STATUS_ERROR) { - TRACE(ft_t_noise, "error status set"); - TRACE_CATCH(ftape_report_error(&ftcmd->ft_error, - &ftcmd->ft_cmd, 1),); - } - TRACE_EXIT 0; /* this is not an i/o error */ -} -#endif - -/* IOCTL routine called by kernel-interface code - */ -int _zft_ioctl(unsigned int command, void __user * arg) -{ - int result; - union { struct mtop mtop; - struct mtget mtget; - struct mtpos mtpos; -#ifdef MTIOCRDFTSEG - struct mtftseg mtftseg; -#endif -#ifdef MTIOCVOLINFO - struct mtvolinfo mtvolinfo; -#endif -#ifdef MTIOCGETSIZE - struct mttapesize mttapesize; -#endif -#ifdef MTIOCFTFORMAT - struct mtftformat mtftformat; -#endif -#ifdef ZFT_OBSOLETE - struct mtblksz mtblksz; -#endif -#ifdef MTIOCFTCMD - struct mtftcmd mtftcmd; -#endif - } krnl_arg; - int arg_size = _IOC_SIZE(command); - int dir = _IOC_DIR(command); - TRACE_FUN(ft_t_flow); - - /* This check will only catch arguments that are too large ! - */ - if (dir & (_IOC_READ | _IOC_WRITE) && arg_size > sizeof(krnl_arg)) { - TRACE_ABORT(-EINVAL, - ft_t_info, "bad argument size: %d", arg_size); - } - if (dir & _IOC_WRITE) { - if (copy_from_user(&krnl_arg, arg, arg_size) != 0) { - TRACE_EXIT -EFAULT; - } - } - TRACE(ft_t_flow, "called with ioctl command: 0x%08x", command); - switch (command) { - case MTIOCTOP: - result = mtioctop(&krnl_arg.mtop, arg_size); - break; - case MTIOCGET: - result = mtiocget(&krnl_arg.mtget, arg_size); - break; - case MTIOCPOS: - result = mtiocpos(&krnl_arg.mtpos, arg_size); - break; -#ifdef MTIOCVOLINFO - case MTIOCVOLINFO: - result = mtiocvolinfo(&krnl_arg.mtvolinfo, arg_size); - break; -#endif -#ifdef ZFT_OBSOLETE - case MTIOC_ZFTAPE_GETBLKSZ: - result = mtioc_zftape_getblksz(&krnl_arg.mtblksz, arg_size); - break; -#endif -#ifdef MTIOCRDFTSEG - case MTIOCRDFTSEG: /* read a segment via ioctl */ - result = mtiocrdftseg(&krnl_arg.mtftseg, arg_size); - break; -#endif -#ifdef MTIOCWRFTSEG - case MTIOCWRFTSEG: /* write a segment via ioctl */ - result = mtiocwrftseg(&krnl_arg.mtftseg, arg_size); - break; -#endif -#ifdef MTIOCGETSIZE - case MTIOCGETSIZE: - result = mtiocgetsize(&krnl_arg.mttapesize, arg_size); - break; -#endif -#ifdef MTIOCFTFORMAT - case MTIOCFTFORMAT: - result = mtiocftformat(&krnl_arg.mtftformat, arg_size); - break; -#endif -#ifdef MTIOCFTCMD - case MTIOCFTCMD: - result = mtiocftcmd(&krnl_arg.mtftcmd, arg_size); - break; -#endif - default: - result = -EINVAL; - break; - } - if ((result >= 0) && (dir & _IOC_READ)) { - if (copy_to_user(arg, &krnl_arg, arg_size) != 0) { - TRACE_EXIT -EFAULT; - } - } - TRACE_EXIT result; -} diff --git a/drivers/char/ftape/zftape/zftape-ctl.h b/drivers/char/ftape/zftape/zftape-ctl.h deleted file mode 100644 index 8e6f2d7ac74..00000000000 --- a/drivers/char/ftape/zftape/zftape-ctl.h +++ /dev/null @@ -1,58 +0,0 @@ -#ifndef _ZFTAPE_CTL_H -#define _ZFTAPE_CTL_H - -/* - * Copyright (C) 1996, 1997 Claus-Justus Heine. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; see the file COPYING. If not, write to - the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - - * - * $Source: /homes/cvs/ftape-stacked/ftape/zftape/zftape-ctl.h,v $ - * $Revision: 1.2 $ - * $Date: 1997/10/05 19:19:02 $ - * - * This file contains the non-standard IOCTL related definitions - * for the QIC-40/80 floppy-tape driver for Linux. - */ - -#include <linux/ioctl.h> -#include <linux/mtio.h> - -#include "../zftape/zftape-rw.h" - -#ifdef CONFIG_ZFTAPE_MODULE -#define ftape_status (*zft_status) -#endif - -extern int zft_offline; -extern int zft_mt_compression; -extern int zft_write_protected; -extern int zft_header_read; -extern unsigned int zft_unit; -extern int zft_resid; - -extern void zft_reset_position(zft_position *pos); -extern int zft_check_write_access(zft_position *pos); -extern int zft_def_idle_state(void); - -/* hooks for the VFS interface - */ -extern int _zft_open(unsigned int dev_minor, unsigned int access_mode); -extern int _zft_close(void); -extern int _zft_ioctl(unsigned int command, void __user *arg); -#endif - - - diff --git a/drivers/char/ftape/zftape/zftape-eof.c b/drivers/char/ftape/zftape/zftape-eof.c deleted file mode 100644 index dcadcaee9ac..00000000000 --- a/drivers/char/ftape/zftape/zftape-eof.c +++ /dev/null @@ -1,199 +0,0 @@ -/* - * I use these routines just to decide when I have to fake a - * volume-table to preserve compatibility to original ftape. - */ -/* - * Copyright (C) 1994-1995 Bas Laarhoven. - * - * Modified for zftape 1996, 1997 Claus Heine. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; see the file COPYING. If not, write to - the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - - * $Source: /homes/cvs/ftape-stacked/ftape/zftape/zftape-eof.c,v $ - * $Revision: 1.2 $ - * $Date: 1997/10/05 19:19:02 $ - * - * This file contains the eof mark handling code - * for the QIC-40/80 floppy-tape driver for Linux. - */ - -#include <linux/string.h> -#include <linux/errno.h> - -#include <linux/zftape.h> - -#include "../zftape/zftape-init.h" -#include "../zftape/zftape-rw.h" -#include "../zftape/zftape-eof.h" - -/* Global vars. - */ - -/* a copy of the failed sector log from the header segment. - */ -eof_mark_union *zft_eof_map; - -/* number of eof marks (entries in bad sector log) on tape. - */ -int zft_nr_eof_marks = -1; - - -/* Local vars. - */ - -static char linux_tape_label[] = "Linux raw format V"; -enum { - min_fmt_version = 1, max_fmt_version = 2 -}; -static unsigned ftape_fmt_version = 0; - - -/* Ftape (mis)uses the bad sector log to record end-of-file marks. - * Initially (when the tape is erased) all entries in the bad sector - * log are added to the tape's bad sector map. The bad sector log then - * is cleared. - * - * The bad sector log normally contains entries of the form: - * even 16-bit word: segment number of bad sector - * odd 16-bit word: encoded date - * There can be a total of 448 entries (1792 bytes). - * - * My guess is that no program is using this bad sector log (the * - * format seems useless as there is no indication of the bad sector - * itself, only the segment) However, if any program does use the bad - * sector log, the format used by ftape will let the program think - * there are some bad sectors and no harm is done. - * - * The eof mark entries that ftape stores in the bad sector log: even - * 16-bit word: segment number of eof mark odd 16-bit word: sector - * number of eof mark [1..32] - * - * The zft_eof_map as maintained is a sorted list of eof mark entries. - * - * - * The tape name field in the header segments is used to store a linux - * tape identification string and a version number. This way the tape - * can be recognized as a Linux raw format tape when using tools under - * other OS's. - * - * 'Wide' QIC tapes (format code 4) don't have a failed sector list - * anymore. That space is used for the (longer) bad sector map that - * now is a variable length list too. We now store our end-of-file - * marker list after the bad-sector-map on tape. The list is delimited - * by a (__u32) 0 entry. - */ - -int zft_ftape_validate_label(char *label) -{ - static char tmp_label[45]; - int result = 0; - TRACE_FUN(ft_t_any); - - memcpy(tmp_label, label, FT_LABEL_SZ); - tmp_label[FT_LABEL_SZ] = '\0'; - TRACE(ft_t_noise, "tape label = `%s'", tmp_label); - ftape_fmt_version = 0; - if (memcmp(label, linux_tape_label, strlen(linux_tape_label)) == 0) { - int pos = strlen(linux_tape_label); - while (label[pos] >= '0' && label[pos] <= '9') { - ftape_fmt_version *= 10; - ftape_fmt_version = label[ pos++] - '0'; - } - result = (ftape_fmt_version >= min_fmt_version && - ftape_fmt_version <= max_fmt_version); - } - TRACE(ft_t_noise, "format version = %d", ftape_fmt_version); - TRACE_EXIT result; -} - -static __u8 * find_end_of_eof_list(__u8 * ptr, __u8 * limit) -{ - while (ptr + 3 < limit) { - - if (get_unaligned((__u32*)ptr)) { - ptr += sizeof(__u32); - } else { - return ptr; - } - } - return NULL; -} - -void zft_ftape_extract_file_marks(__u8* address) -{ - int i; - TRACE_FUN(ft_t_any); - - zft_eof_map = NULL; - if (ft_format_code == fmt_var || ft_format_code == fmt_big) { - __u8* end; - __u8* start = ftape_find_end_of_bsm_list(address); - - zft_nr_eof_marks = 0; - if (start) { - start += 3; /* skip end of list mark */ - end = find_end_of_eof_list(start, - address + FT_SEGMENT_SIZE); - if (end && end - start <= FT_FSL_SIZE) { - zft_nr_eof_marks = ((end - start) / - sizeof(eof_mark_union)); - zft_eof_map = (eof_mark_union *)start; - } else { - TRACE(ft_t_err, - "EOF Mark List is too long or damaged!"); - } - } else { - TRACE(ft_t_err, - "Bad Sector List is too long or damaged !"); - } - } else { - zft_eof_map = (eof_mark_union *)&address[FT_FSL]; - zft_nr_eof_marks = GET2(address, FT_FSL_CNT); - } - TRACE(ft_t_noise, "number of file marks: %d", zft_nr_eof_marks); - if (ftape_fmt_version == 1) { - TRACE(ft_t_info, "swapping version 1 fields"); - /* version 1 format uses swapped sector and segment - * fields, correct that ! - */ - for (i = 0; i < zft_nr_eof_marks; ++i) { - __u16 tmp = GET2(&zft_eof_map[i].mark.segment,0); - PUT2(&zft_eof_map[i].mark.segment, 0, - GET2(&zft_eof_map[i].mark.date,0)); - PUT2(&zft_eof_map[i].mark.date, 0, tmp); - } - } - for (i = 0; i < zft_nr_eof_marks; ++i) { - TRACE(ft_t_noise, "eof mark: %5d/%2d", - GET2(&zft_eof_map[i].mark.segment, 0), - GET2(&zft_eof_map[i].mark.date,0)); - } - TRACE_EXIT; -} - -void zft_clear_ftape_file_marks(void) -{ - TRACE_FUN(ft_t_flow); - /* Clear failed sector log: remove all tape marks. We - * don't use old ftape-style EOF-marks. - */ - TRACE(ft_t_info, "Clearing old ftape's eof map"); - memset(zft_eof_map, 0, zft_nr_eof_marks * sizeof(__u32)); - zft_nr_eof_marks = 0; - PUT2(zft_hseg_buf, FT_FSL_CNT, 0); /* nr of eof-marks */ - zft_header_changed = 1; - zft_update_label(zft_hseg_buf); - TRACE_EXIT; -} diff --git a/drivers/char/ftape/zftape/zftape-eof.h b/drivers/char/ftape/zftape/zftape-eof.h deleted file mode 100644 index 26568c26c51..00000000000 --- a/drivers/char/ftape/zftape/zftape-eof.h +++ /dev/null @@ -1,52 +0,0 @@ -#ifndef _ZFTAPE_EOF_H -#define _ZFTAPE_EOF_H - -/* - * Copyright (C) 1994-1995 Bas Laarhoven. - * adaptaed for zftape 1996, 1997 by Claus Heine - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; see the file COPYING. If not, write to - the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - - * - * $Source: /homes/cvs/ftape-stacked/ftape/zftape/zftape-eof.h,v $ - * $Revision: 1.2 $ - * $Date: 1997/10/05 19:19:03 $ - * - * Definitions and declarations for the end of file markers - * for the QIC-40/80 floppy-tape driver for Linux. - */ - -#include <linux/ftape-header-segment.h> -#include "../zftape/zftape-buffers.h" -/* failed sector log size (only used if format code != 4). - */ - -typedef union { - ft_fsl_entry mark; - __u32 entry; -} eof_mark_union; - -/* ftape-eof.c defined global vars. - */ -extern int zft_nr_eof_marks; -extern eof_mark_union *zft_eof_map; - -/* ftape-eof.c defined global functions. - */ -extern void zft_ftape_extract_file_marks(__u8* address); -extern int zft_ftape_validate_label(char* label); -extern void zft_clear_ftape_file_marks(void); - -#endif diff --git a/drivers/char/ftape/zftape/zftape-init.c b/drivers/char/ftape/zftape/zftape-init.c deleted file mode 100644 index 164a1aa77a2..00000000000 --- a/drivers/char/ftape/zftape/zftape-init.c +++ /dev/null @@ -1,377 +0,0 @@ -/* - * Copyright (C) 1996, 1997 Claus-Justus Heine. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; see the file COPYING. If not, write to - the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - - * - * This file contains the code that registers the zftape frontend - * to the ftape floppy tape driver for Linux - */ - -#include <linux/module.h> -#include <linux/errno.h> -#include <linux/fs.h> -#include <linux/kernel.h> -#include <linux/signal.h> -#include <linux/major.h> -#include <linux/slab.h> -#ifdef CONFIG_KMOD -#include <linux/kmod.h> -#endif -#include <linux/fcntl.h> -#include <linux/smp_lock.h> - -#include <linux/zftape.h> -#include <linux/init.h> -#include <linux/device.h> - -#include "../zftape/zftape-init.h" -#include "../zftape/zftape-read.h" -#include "../zftape/zftape-write.h" -#include "../zftape/zftape-ctl.h" -#include "../zftape/zftape-buffers.h" - -MODULE_AUTHOR("(c) 1996, 1997 Claus-Justus Heine " - "(claus@momo.math.rwth-aachen.de)"); -MODULE_DESCRIPTION(ZFTAPE_VERSION " - " - "VFS interface for the Linux floppy tape driver. " - "Support for QIC-113 compatible volume table " - "and builtin compression (lzrw3 algorithm)"); -MODULE_SUPPORTED_DEVICE("char-major-27"); -MODULE_LICENSE("GPL"); - -/* Global vars. - */ -struct zft_cmpr_ops *zft_cmpr_ops = NULL; -const ftape_info *zft_status; - -/* Local vars. - */ -static unsigned long busy_flag; - -static sigset_t orig_sigmask; - -/* the interface to the kernel vfs layer - */ - -/* Note about llseek(): - * - * st.c and tpqic.c update fp->f_pos but don't implment llseek() and - * initialize the llseek component of the file_ops struct with NULL. - * This means that the user will get the default seek, but the tape - * device will not respect the new position, but happily read from the - * old position. Think a zftape specific llseek() function would be - * better, returning -ESPIPE. TODO. - */ - -static int zft_open (struct inode *ino, struct file *filep); -static int zft_close(struct inode *ino, struct file *filep); -static int zft_ioctl(struct inode *ino, struct file *filep, - unsigned int command, unsigned long arg); -static int zft_mmap(struct file *filep, struct vm_area_struct *vma); -static ssize_t zft_read (struct file *fp, char __user *buff, - size_t req_len, loff_t *ppos); -static ssize_t zft_write(struct file *fp, const char __user *buff, - size_t req_len, loff_t *ppos); - -static const struct file_operations zft_cdev = -{ - .owner = THIS_MODULE, - .read = zft_read, - .write = zft_write, - .ioctl = zft_ioctl, - .mmap = zft_mmap, - .open = zft_open, - .release = zft_close, -}; - -static struct class *zft_class; - -/* Open floppy tape device - */ -static int zft_open(struct inode *ino, struct file *filep) -{ - int result; - TRACE_FUN(ft_t_flow); - - nonseekable_open(ino, filep); - TRACE(ft_t_flow, "called for minor %d", iminor(ino)); - if ( test_and_set_bit(0,&busy_flag) ) { - TRACE_ABORT(-EBUSY, ft_t_warn, "failed: already busy"); - } - if ((iminor(ino) & ~(ZFT_MINOR_OP_MASK | FTAPE_NO_REWIND)) - > - FTAPE_SEL_D) { - clear_bit(0,&busy_flag); - TRACE_ABORT(-ENXIO, ft_t_err, "failed: invalid unit nr"); - } - orig_sigmask = current->blocked; - sigfillset(¤t->blocked); - result = _zft_open(iminor(ino), filep->f_flags & O_ACCMODE); - if (result < 0) { - current->blocked = orig_sigmask; /* restore mask */ - clear_bit(0,&busy_flag); - TRACE_ABORT(result, ft_t_err, "_ftape_open failed"); - } else { - /* Mask signals that will disturb proper operation of the - * program that is calling. - */ - current->blocked = orig_sigmask; - sigaddsetmask (¤t->blocked, _DO_BLOCK); - TRACE_EXIT 0; - } -} - -/* Close floppy tape device - */ -static int zft_close(struct inode *ino, struct file *filep) -{ - int result; - TRACE_FUN(ft_t_flow); - - if ( !test_bit(0,&busy_flag) || iminor(ino) != zft_unit) { - TRACE(ft_t_err, "failed: not busy or wrong unit"); - TRACE_EXIT 0; - } - sigfillset(¤t->blocked); - result = _zft_close(); - if (result < 0) { - TRACE(ft_t_err, "_zft_close failed"); - } - current->blocked = orig_sigmask; /* restore before open state */ - clear_bit(0,&busy_flag); - TRACE_EXIT 0; -} - -/* Ioctl for floppy tape device - */ -static int zft_ioctl(struct inode *ino, struct file *filep, - unsigned int command, unsigned long arg) -{ - int result = -EIO; - sigset_t old_sigmask; - TRACE_FUN(ft_t_flow); - - if ( !test_bit(0,&busy_flag) || iminor(ino) != zft_unit || ft_failure) { - TRACE_ABORT(-EIO, ft_t_err, - "failed: not busy, failure or wrong unit"); - } - old_sigmask = current->blocked; /* save mask */ - sigfillset(¤t->blocked); - /* This will work as long as sizeof(void *) == sizeof(long) */ - result = _zft_ioctl(command, (void __user *) arg); - current->blocked = old_sigmask; /* restore mask */ - TRACE_EXIT result; -} - -/* Ioctl for floppy tape device - */ -static int zft_mmap(struct file *filep, struct vm_area_struct *vma) -{ - int result = -EIO; - sigset_t old_sigmask; - TRACE_FUN(ft_t_flow); - - if ( !test_bit(0,&busy_flag) || - iminor(filep->f_dentry->d_inode) != zft_unit || - ft_failure) - { - TRACE_ABORT(-EIO, ft_t_err, - "failed: not busy, failure or wrong unit"); - } - old_sigmask = current->blocked; /* save mask */ - sigfillset(¤t->blocked); - if ((result = ftape_mmap(vma)) >= 0) { -#ifndef MSYNC_BUG_WAS_FIXED - static struct vm_operations_struct dummy = { NULL, }; - vma->vm_ops = &dummy; -#endif - } - current->blocked = old_sigmask; /* restore mask */ - TRACE_EXIT result; -} - -/* Read from floppy tape device - */ -static ssize_t zft_read(struct file *fp, char __user *buff, - size_t req_len, loff_t *ppos) -{ - int result = -EIO; - sigset_t old_sigmask; - struct inode *ino = fp->f_dentry->d_inode; - TRACE_FUN(ft_t_flow); - - TRACE(ft_t_data_flow, "called with count: %ld", (unsigned long)req_len); - if (!test_bit(0,&busy_flag) || iminor(ino) != zft_unit || ft_failure) { - TRACE_ABORT(-EIO, ft_t_err, - "failed: not busy, failure or wrong unit"); - } - old_sigmask = current->blocked; /* save mask */ - sigfillset(¤t->blocked); - result = _zft_read(buff, req_len); - current->blocked = old_sigmask; /* restore mask */ - TRACE(ft_t_data_flow, "return with count: %d", result); - TRACE_EXIT result; -} - -/* Write to tape device - */ -static ssize_t zft_write(struct file *fp, const char __user *buff, - size_t req_len, loff_t *ppos) -{ - int result = -EIO; - sigset_t old_sigmask; - struct inode *ino = fp->f_dentry->d_inode; - TRACE_FUN(ft_t_flow); - - TRACE(ft_t_flow, "called with count: %ld", (unsigned long)req_len); - if (!test_bit(0,&busy_flag) || iminor(ino) != zft_unit || ft_failure) { - TRACE_ABORT(-EIO, ft_t_err, - "failed: not busy, failure or wrong unit"); - } - old_sigmask = current->blocked; /* save mask */ - sigfillset(¤t->blocked); - result = _zft_write(buff, req_len); - current->blocked = old_sigmask; /* restore mask */ - TRACE(ft_t_data_flow, "return with count: %d", result); - TRACE_EXIT result; -} - -/* END OF VFS INTERFACE - * - *****************************************************************************/ - -/* driver/module initialization - */ - -/* the compression module has to call this function to hook into the zftape - * code - */ -int zft_cmpr_register(struct zft_cmpr_ops *new_ops) -{ - TRACE_FUN(ft_t_flow); - - if (zft_cmpr_ops != NULL) { - TRACE_EXIT -EBUSY; - } else { - zft_cmpr_ops = new_ops; - TRACE_EXIT 0; - } -} - -/* lock the zft-compressor() module. - */ -int zft_cmpr_lock(int try_to_load) -{ - if (zft_cmpr_ops == NULL) { -#ifdef CONFIG_KMOD - if (try_to_load) { - request_module("zft-compressor"); - if (zft_cmpr_ops == NULL) { - return -ENOSYS; - } - } else { - return -ENOSYS; - } -#else - return -ENOSYS; -#endif - } - (*zft_cmpr_ops->lock)(); - return 0; -} - -#ifdef CONFIG_ZFT_COMPRESSOR -extern int zft_compressor_init(void); -#endif - -/* Called by modules package when installing the driver or by kernel - * during the initialization phase - */ -int __init zft_init(void) -{ - int i; - TRACE_FUN(ft_t_flow); - -#ifdef MODULE - printk(KERN_INFO ZFTAPE_VERSION "\n"); - if (TRACE_LEVEL >= ft_t_info) { - printk( -KERN_INFO -"(c) 1996, 1997 Claus-Justus Heine (claus@momo.math.rwth-aachen.de)\n" -KERN_INFO -"vfs interface for ftape floppy tape driver.\n" -KERN_INFO -"Support for QIC-113 compatible volume table, dynamic memory allocation\n" -KERN_INFO -"and builtin compression (lzrw3 algorithm).\n"); - } -#else /* !MODULE */ - /* print a short no-nonsense boot message */ - printk(KERN_INFO ZFTAPE_VERSION "\n"); -#endif /* MODULE */ - TRACE(ft_t_info, "zft_init @ 0x%p", zft_init); - TRACE(ft_t_info, - "installing zftape VFS interface for ftape driver ..."); - TRACE_CATCH(register_chrdev(QIC117_TAPE_MAJOR, "zft", &zft_cdev),); - - zft_class = class_create(THIS_MODULE, "zft"); - for (i = 0; i < 4; i++) { - class_device_create(zft_class, NULL, MKDEV(QIC117_TAPE_MAJOR, i), NULL, "qft%i", i); - class_device_create(zft_class, NULL, MKDEV(QIC117_TAPE_MAJOR, i + 4), NULL, "nqft%i", i); - class_device_create(zft_class, NULL, MKDEV(QIC117_TAPE_MAJOR, i + 16), NULL, "zqft%i", i); - class_device_create(zft_class, NULL, MKDEV(QIC117_TAPE_MAJOR, i + 20), NULL, "nzqft%i", i); - class_device_create(zft_class, NULL, MKDEV(QIC117_TAPE_MAJOR, i + 32), NULL, "rawqft%i", i); - class_device_create(zft_class, NULL, MKDEV(QIC117_TAPE_MAJOR, i + 36), NULL, "nrawrawqft%i", i); - } - -#ifdef CONFIG_ZFT_COMPRESSOR - (void)zft_compressor_init(); -#endif - zft_status = ftape_get_status(); /* fetch global data of ftape - * hardware driver - */ - TRACE_EXIT 0; -} - - -/* Called by modules package when removing the driver - */ -static void zft_exit(void) -{ - int i; - TRACE_FUN(ft_t_flow); - - if (unregister_chrdev(QIC117_TAPE_MAJOR, "zft") != 0) { - TRACE(ft_t_warn, "failed"); - } else { - TRACE(ft_t_info, "successful"); - } - for (i = 0; i < 4; i++) { - class_device_destroy(zft_class, MKDEV(QIC117_TAPE_MAJOR, i)); - class_device_destroy(zft_class, MKDEV(QIC117_TAPE_MAJOR, i + 4)); - class_device_destroy(zft_class, MKDEV(QIC117_TAPE_MAJOR, i + 16)); - class_device_destroy(zft_class, MKDEV(QIC117_TAPE_MAJOR, i + 20)); - class_device_destroy(zft_class, MKDEV(QIC117_TAPE_MAJOR, i + 32)); - class_device_destroy(zft_class, MKDEV(QIC117_TAPE_MAJOR, i + 36)); - } - class_destroy(zft_class); - zft_uninit_mem(); /* release remaining memory, if any */ - printk(KERN_INFO "zftape successfully unloaded.\n"); - TRACE_EXIT; -} - -module_init(zft_init); -module_exit(zft_exit); diff --git a/drivers/char/ftape/zftape/zftape-init.h b/drivers/char/ftape/zftape/zftape-init.h deleted file mode 100644 index 937e5d48c20..00000000000 --- a/drivers/char/ftape/zftape/zftape-init.h +++ /dev/null @@ -1,77 +0,0 @@ -#ifndef _ZFTAPE_INIT_H -#define _ZFTAPE_INIT_H - -/* - * Copyright (C) 1996, 1997 Claus Heine. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; see the file COPYING. If not, write to - the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - - * - * $Source: /homes/cvs/ftape-stacked/ftape/zftape/zftape-init.h,v $ - * $Revision: 1.2 $ - * $Date: 1997/10/05 19:19:05 $ - * - * This file contains definitions and macro for the vfs - * interface defined by zftape - * - */ - -#include <linux/ftape-header-segment.h> - -#include "../lowlevel/ftape-tracing.h" -#include "../lowlevel/ftape-ctl.h" -#include "../lowlevel/ftape-read.h" -#include "../lowlevel/ftape-write.h" -#include "../lowlevel/ftape-bsm.h" -#include "../lowlevel/ftape-io.h" -#include "../lowlevel/ftape-buffer.h" -#include "../lowlevel/ftape-format.h" - -#include "../zftape/zftape-rw.h" - -#ifdef MODULE -#define ftape_status (*zft_status) -#endif - -extern const ftape_info *zft_status; /* needed for zftape-vtbl.h */ - -#include "../zftape/zftape-vtbl.h" - -struct zft_cmpr_ops { - int (*write)(int *write_cnt, - __u8 *dst_buf, const int seg_sz, - const __u8 __user *src_buf, const int req_len, - const zft_position *pos, const zft_volinfo *volume); - int (*read)(int *read_cnt, - __u8 __user *dst_buf, const int req_len, - const __u8 *src_buf, const int seg_sz, - const zft_position *pos, const zft_volinfo *volume); - int (*seek)(unsigned int new_block_pos, - zft_position *pos, const zft_volinfo *volume, - __u8 *buffer); - void (*lock) (void); - void (*reset) (void); - void (*cleanup)(void); -}; - -extern struct zft_cmpr_ops *zft_cmpr_ops; -/* zftape-init.c defined global functions. - */ -extern int zft_cmpr_register(struct zft_cmpr_ops *new_ops); -extern int zft_cmpr_lock(int try_to_load); - -#endif - - diff --git a/drivers/char/ftape/zftape/zftape-read.c b/drivers/char/ftape/zftape/zftape-read.c deleted file mode 100644 index 214bf03dce6..00000000000 --- a/drivers/char/ftape/zftape/zftape-read.c +++ /dev/null @@ -1,377 +0,0 @@ -/* - * Copyright (C) 1996, 1997 Claus-Justus Heine - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; see the file COPYING. If not, write to - the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - - * - * $Source: /homes/cvs/ftape-stacked/ftape/zftape/zftape-read.c,v $ - * $Revision: 1.2 $ - * $Date: 1997/10/05 19:19:06 $ - * - * This file contains the high level reading code - * for the QIC-117 floppy-tape driver for Linux. - */ - -#include <linux/errno.h> -#include <linux/mm.h> - -#include <linux/zftape.h> - -#include <asm/uaccess.h> - -#include "../zftape/zftape-init.h" -#include "../zftape/zftape-eof.h" -#include "../zftape/zftape-ctl.h" -#include "../zftape/zftape-write.h" -#include "../zftape/zftape-read.h" -#include "../zftape/zftape-rw.h" -#include "../zftape/zftape-vtbl.h" - -/* Global vars. - */ -int zft_just_before_eof; - -/* Local vars. - */ -static int buf_len_rd; - -void zft_zap_read_buffers(void) -{ - buf_len_rd = 0; -} - -int zft_read_header_segments(void) -{ - TRACE_FUN(ft_t_flow); - - zft_header_read = 0; - TRACE_CATCH(zft_vmalloc_once(&zft_hseg_buf, FT_SEGMENT_SIZE),); - TRACE_CATCH(ftape_read_header_segment(zft_hseg_buf),); - TRACE(ft_t_info, "Segments written since first format: %d", - (int)GET4(zft_hseg_buf, FT_SEG_CNT)); - zft_qic113 = (ft_format_code != fmt_normal && - ft_format_code != fmt_1100ft && - ft_format_code != fmt_425ft); - TRACE(ft_t_info, "ft_first_data_segment: %d, ft_last_data_segment: %d", - ft_first_data_segment, ft_last_data_segment); - zft_capacity = zft_get_capacity(); - zft_old_ftape = zft_ftape_validate_label(&zft_hseg_buf[FT_LABEL]); - if (zft_old_ftape) { - TRACE(ft_t_info, -"Found old ftaped tape, emulating eof marks, entering read-only mode"); - zft_ftape_extract_file_marks(zft_hseg_buf); - TRACE_CATCH(zft_fake_volume_headers(zft_eof_map, - zft_nr_eof_marks),); - } else { - /* the specs say that the volume table must be - * initialized with zeroes during formatting, so it - * MUST be readable, i.e. contain vaid ECC - * information. - */ - TRACE_CATCH(ftape_read_segment(ft_first_data_segment, - zft_deblock_buf, - FT_RD_SINGLE),); - TRACE_CATCH(zft_extract_volume_headers(zft_deblock_buf),); - } - zft_header_read = 1; - zft_set_flags(zft_unit); - zft_reset_position(&zft_pos); - TRACE_EXIT 0; -} - -int zft_fetch_segment_fraction(const unsigned int segment, void *buffer, - const ft_read_mode_t read_mode, - const unsigned int start, - const unsigned int size) -{ - int seg_sz; - TRACE_FUN(ft_t_flow); - - if (segment == zft_deblock_segment) { - TRACE(ft_t_data_flow, - "re-using segment %d already in deblock buffer", - segment); - seg_sz = zft_get_seg_sz(segment); - if (start > seg_sz) { - TRACE_ABORT(-EINVAL, ft_t_bug, - "trying to read beyond end of segment:\n" - KERN_INFO "seg_sz : %d\n" - KERN_INFO "start : %d\n" - KERN_INFO "segment: %d", - seg_sz, start, segment); - } - if ((start + size) > seg_sz) { - TRACE_EXIT seg_sz - start; - } - TRACE_EXIT size; - } - seg_sz = ftape_read_segment_fraction(segment, buffer, read_mode, - start, size); - TRACE(ft_t_data_flow, "segment %d, result %d", segment, seg_sz); - if ((int)seg_sz >= 0 && start == 0 && size == FT_SEGMENT_SIZE) { - /* this implicitly assumes that we are always called with - * buffer == zft_deblock_buf - */ - zft_deblock_segment = segment; - } else { - zft_deblock_segment = -1; - } - TRACE_EXIT seg_sz; -} - -/* - * out: - * - * int *read_cnt: the number of bytes we removed from the - * zft_deblock_buf (result) - * - * int *to_do : the remaining size of the read-request. Is changed. - * - * in: - * - * char *buff : buff is the address of the upper part of the user - * buffer, that hasn't been filled with data yet. - * int buf_pos_read: copy of buf_pos_rd - * int buf_len_read: copy of buf_len_rd - * char *zft_deblock_buf: ftape_zft_deblock_buf - * - * returns the amount of data actually copied to the user-buffer - * - * to_do MUST NOT SHRINK except to indicate an EOT. In this case to_do - * has to be set to 0. We cannot return -ENOSPC, because we return the - * amount of data actually * copied to the user-buffer - */ -static int zft_simple_read (int *read_cnt, - __u8 __user *dst_buf, - const int to_do, - const __u8 *src_buf, - const int seg_sz, - const zft_position *pos, - const zft_volinfo *volume) -{ - TRACE_FUN(ft_t_flow); - - if (seg_sz - pos->seg_byte_pos < to_do) { - *read_cnt = seg_sz - pos->seg_byte_pos; - } else { - *read_cnt = to_do; - } - if (copy_to_user(dst_buf, - src_buf + pos->seg_byte_pos, *read_cnt) != 0) { - TRACE_EXIT -EFAULT; - } - TRACE(ft_t_noise, "nr bytes just read: %d", *read_cnt); - TRACE_EXIT *read_cnt; -} - -/* req_len: gets clipped due to EOT of EOF. - * req_clipped: is a flag indicating whether req_len was clipped or not - * volume: contains information on current volume (blk_sz etc.) - */ -static int check_read_access(int *req_len, - const zft_volinfo **volume, - int *req_clipped, - const zft_position *pos) -{ - static __s64 remaining; - static int eod; - TRACE_FUN(ft_t_flow); - - if (zft_io_state != zft_reading) { - if (zft_offline) { /* offline includes no_tape */ - TRACE_ABORT(-ENXIO, ft_t_warn, - "tape is offline or no cartridge"); - } - if (!ft_formatted) { - TRACE_ABORT(-EACCES, - ft_t_warn, "tape is not formatted"); - } - /* now enter defined state, read header segment if not - * already done and flush write buffers - */ - TRACE_CATCH(zft_def_idle_state(),); - zft_io_state = zft_reading; - if (zft_tape_at_eod(pos)) { - eod = 1; - TRACE_EXIT 1; - } - eod = 0; - *volume = zft_find_volume(pos->seg_pos); - /* get the space left until EOF */ - remaining = zft_check_for_eof(*volume, pos); - buf_len_rd = 0; - TRACE(ft_t_noise, "remaining: " LL_X ", vol_no: %d", - LL(remaining), (*volume)->count); - } else if (zft_tape_at_eod(pos)) { - if (++eod > 2) { - TRACE_EXIT -EIO; /* st.c also returns -EIO */ - } else { - TRACE_EXIT 1; - } - } - if ((*req_len % (*volume)->blk_sz) != 0) { - /* this message is informational only. The user gets the - * proper return value - */ - TRACE_ABORT(-EINVAL, ft_t_info, - "req_len %d not a multiple of block size %d", - *req_len, (*volume)->blk_sz); - } - /* As GNU tar doesn't accept partial read counts when the - * multiple volume flag is set, we make sure to return the - * requested amount of data. Except, of course, at the end of - * the tape or file mark. - */ - remaining -= *req_len; - if (remaining <= 0) { - TRACE(ft_t_noise, - "clipped request from %d to %d.", - *req_len, (int)(*req_len + remaining)); - *req_len += remaining; - *req_clipped = 1; - } else { - *req_clipped = 0; - } - TRACE_EXIT 0; -} - -/* this_segs_size: the current segment's size. - * buff: the USER-SPACE buffer provided by the calling function. - * req_len: how much data should be read at most. - * volume: contains information on current volume (blk_sz etc.) - */ -static int empty_deblock_buf(__u8 __user *usr_buf, const int req_len, - const __u8 *src_buf, const int seg_sz, - zft_position *pos, - const zft_volinfo *volume) -{ - int cnt; - int result = 0; - TRACE_FUN(ft_t_flow); - - TRACE(ft_t_data_flow, "this_segs_size: %d", seg_sz); - if (zft_use_compression && volume->use_compression) { - TRACE_CATCH(zft_cmpr_lock(1 /* try to load */),); - TRACE_CATCH(result= (*zft_cmpr_ops->read)(&cnt, - usr_buf, req_len, - src_buf, seg_sz, - pos, volume),); - } else { - TRACE_CATCH(result= zft_simple_read (&cnt, - usr_buf, req_len, - src_buf, seg_sz, - pos, volume),); - } - pos->volume_pos += result; - pos->tape_pos += cnt; - pos->seg_byte_pos += cnt; - buf_len_rd -= cnt; /* remaining bytes in buffer */ - TRACE(ft_t_data_flow, "buf_len_rd: %d, cnt: %d", buf_len_rd, cnt); - if(pos->seg_byte_pos >= seg_sz) { - pos->seg_pos++; - pos->seg_byte_pos = 0; - } - TRACE(ft_t_data_flow, "bytes moved out of deblock-buffer: %d", cnt); - TRACE_EXIT result; -} - - -/* note: we store the segment id of the segment that is inside the - * deblock buffer. This spares a lot of ftape_read_segment()s when we - * use small block-sizes. The block-size may be 1kb (SECTOR_SIZE). In - * this case a MTFSR 28 maybe still inside the same segment. - */ -int _zft_read(char __user *buff, int req_len) -{ - int req_clipped; - int result = 0; - int bytes_read = 0; - static unsigned int seg_sz = 0; - static const zft_volinfo *volume = NULL; - TRACE_FUN(ft_t_flow); - - zft_resid = req_len; - result = check_read_access(&req_len, &volume, - &req_clipped, &zft_pos); - switch(result) { - case 0: - break; /* nothing special */ - case 1: - TRACE(ft_t_noise, "EOD reached"); - TRACE_EXIT 0; /* EOD */ - default: - TRACE_ABORT(result, ft_t_noise, - "check_read_access() failed with result %d", - result); - TRACE_EXIT result; - } - while (req_len > 0) { - /* Allow escape from this loop on signal ! - */ - FT_SIGNAL_EXIT(_DONT_BLOCK); - /* buf_len_rd == 0 means that we need to read a new - * segment. - */ - if (buf_len_rd == 0) { - while((result = zft_fetch_segment(zft_pos.seg_pos, - zft_deblock_buf, - FT_RD_AHEAD)) == 0) { - zft_pos.seg_pos ++; - zft_pos.seg_byte_pos = 0; - } - if (result < 0) { - zft_resid -= bytes_read; - TRACE_ABORT(result, ft_t_noise, - "zft_fetch_segment(): %d", - result); - } - seg_sz = result; - buf_len_rd = seg_sz - zft_pos.seg_byte_pos; - } - TRACE_CATCH(result = empty_deblock_buf(buff, - req_len, - zft_deblock_buf, - seg_sz, - &zft_pos, - volume), - zft_resid -= bytes_read); - TRACE(ft_t_data_flow, "bytes just read: %d", result); - bytes_read += result; /* what we got so far */ - buff += result; /* index in user-buffer */ - req_len -= result; /* what's left from req_len */ - } /* while (req_len > 0) */ - if (req_clipped) { - TRACE(ft_t_data_flow, - "maybe partial count because of eof mark"); - if (zft_just_before_eof && bytes_read == 0) { - /* req_len was > 0, but user didn't get - * anything the user has read in the eof-mark - */ - zft_move_past_eof(&zft_pos); - ftape_abort_operation(); - } else { - /* don't skip to the next file before the user - * tried to read a second time past EOF Just - * mark that we are at EOF and maybe decrement - * zft_seg_pos to stay in the same volume; - */ - zft_just_before_eof = 1; - zft_position_before_eof(&zft_pos, volume); - TRACE(ft_t_noise, "just before eof"); - } - } - zft_resid -= result; /* for MTSTATUS */ - TRACE_EXIT bytes_read; -} diff --git a/drivers/char/ftape/zftape/zftape-read.h b/drivers/char/ftape/zftape/zftape-read.h deleted file mode 100644 index 42941de0c23..00000000000 --- a/drivers/char/ftape/zftape/zftape-read.h +++ /dev/null @@ -1,53 +0,0 @@ -#ifndef _ZFTAPE_READ_H -#define _ZFTAPE_READ_H - -/* - * Copyright (C) 1996, 1997 Claus-Justus Heine - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; see the file COPYING. If not, write to - the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - - * - * $Source: /homes/cvs/ftape-stacked/ftape/zftape/zftape-read.h,v $ - * $Revision: 1.2 $ - * $Date: 1997/10/05 19:19:07 $ - * - * This file contains the definitions for the read functions - * for the zftape driver for Linux. - * - */ - -#include "../lowlevel/ftape-read.h" - -/* ftape-read.c defined global vars. - */ -extern int zft_just_before_eof; - -/* ftape-read.c defined global functions. - */ -extern void zft_zap_read_buffers(void); -extern int zft_read_header_segments(void); -extern int zft_fetch_segment_fraction(const unsigned int segment, - void *buffer, - const ft_read_mode_t read_mode, - const unsigned int start, - const unsigned int size); -#define zft_fetch_segment(segment, address, read_mode) \ - zft_fetch_segment_fraction(segment, address, read_mode, \ - 0, FT_SEGMENT_SIZE) -/* hook for the VFS interface - */ -extern int _zft_read(char __user *buff, int req_len); - -#endif /* _ZFTAPE_READ_H */ diff --git a/drivers/char/ftape/zftape/zftape-rw.c b/drivers/char/ftape/zftape/zftape-rw.c deleted file mode 100644 index dab63468688..00000000000 --- a/drivers/char/ftape/zftape/zftape-rw.c +++ /dev/null @@ -1,375 +0,0 @@ -/* - * Copyright (C) 1996, 1997 Claus-Justus Heine - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; see the file COPYING. If not, write to - the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - - * - * $Source: /homes/cvs/ftape-stacked/ftape/zftape/zftape-rw.c,v $ - * $Revision: 1.2 $ - * $Date: 1997/10/05 19:19:08 $ - * - * This file contains some common code for the r/w code for - * zftape. - */ - -#include <linux/errno.h> -#include <linux/mm.h> - -#include <linux/zftape.h> -#include "../zftape/zftape-init.h" -#include "../zftape/zftape-eof.h" -#include "../zftape/zftape-ctl.h" -#include "../zftape/zftape-write.h" -#include "../zftape/zftape-read.h" -#include "../zftape/zftape-rw.h" -#include "../zftape/zftape-vtbl.h" - -/* Global vars. - */ - -__u8 *zft_deblock_buf; -__u8 *zft_hseg_buf; -int zft_deblock_segment = -1; -zft_status_enum zft_io_state = zft_idle; -int zft_header_changed; -int zft_qic113; /* conform to old specs. and old zftape */ -int zft_use_compression; -zft_position zft_pos = { - -1, /* seg_pos */ - 0, /* seg_byte_pos */ - 0, /* tape_pos */ - 0 /* volume_pos */ -}; -unsigned int zft_blk_sz = CONFIG_ZFT_DFLT_BLK_SZ; -__s64 zft_capacity; - -unsigned int zft_written_segments; -int zft_label_changed; - -/* Local vars. - */ - -unsigned int zft_get_seg_sz(unsigned int segment) -{ - int size; - TRACE_FUN(ft_t_any); - - size = FT_SEGMENT_SIZE - - count_ones(ftape_get_bad_sector_entry(segment))*FT_SECTOR_SIZE; - if (size > 0) { - TRACE_EXIT (unsigned)size; - } else { - TRACE_EXIT 0; - } -} - -/* ftape_set_flags(). Claus-Justus Heine, 1994/1995 - */ -void zft_set_flags(unsigned minor_unit) -{ - TRACE_FUN(ft_t_flow); - - zft_use_compression = zft_qic_mode = 0; - switch (minor_unit & ZFT_MINOR_OP_MASK) { - case (ZFT_Q80_MODE | ZFT_ZIP_MODE): - case ZFT_ZIP_MODE: - zft_use_compression = 1; - case 0: - case ZFT_Q80_MODE: - zft_qic_mode = 1; - if (zft_mt_compression) { /* override the default */ - zft_use_compression = 1; - } - break; - case ZFT_RAW_MODE: - TRACE(ft_t_noise, "switching to raw mode"); - break; - default: - TRACE(ft_t_warn, "Warning:\n" - KERN_INFO "Wrong combination of minor device bits.\n" - KERN_INFO "Switching to raw read-only mode."); - zft_write_protected = 1; - break; - } - TRACE_EXIT; -} - -/* computes the segment and byte offset inside the segment - * corresponding to tape_pos. - * - * tape_pos gives the offset in bytes from the beginning of the - * ft_first_data_segment *seg_byte_pos is the offset in the current - * segment in bytes - * - * Of, if this routine was called often one should cache the last data - * pos it was called with, but actually this is only needed in - * ftape_seek_block(), that is, almost never. - */ -int zft_calc_seg_byte_coord(int *seg_byte_pos, __s64 tape_pos) -{ - int segment; - int seg_sz; - TRACE_FUN(ft_t_flow); - - if (tape_pos == 0) { - *seg_byte_pos = 0; - segment = ft_first_data_segment; - } else { - seg_sz = 0; - - for (segment = ft_first_data_segment; - ((tape_pos > 0) && (segment <= ft_last_data_segment)); - segment++) { - seg_sz = zft_get_seg_sz(segment); - tape_pos -= seg_sz; - } - if(tape_pos >= 0) { - /* the case tape_pos > != 0 means that the - * argument tape_pos lies beyond the EOT. - */ - *seg_byte_pos= 0; - } else { /* tape_pos < 0 */ - segment--; - *seg_byte_pos= tape_pos + seg_sz; - } - } - TRACE_EXIT(segment); -} - -/* ftape_calc_tape_pos(). - * - * computes the offset in bytes from the beginning of the - * ft_first_data_segment inverse to ftape_calc_seg_byte_coord - * - * We should do some caching. But how: - * - * Each time the header segments are read in, this routine is called - * with ft_tracks_per_tape*segments_per_track argumnet. So this should be - * the time to reset the cache. - * - * Also, it might be in the future that the bad sector map gets - * changed. -> reset the cache - */ -static int seg_pos; -static __s64 tape_pos; - -__s64 zft_get_capacity(void) -{ - seg_pos = ft_first_data_segment; - tape_pos = 0; - - while (seg_pos <= ft_last_data_segment) { - tape_pos += zft_get_seg_sz(seg_pos ++); - } - return tape_pos; -} - -__s64 zft_calc_tape_pos(int segment) -{ - int d1, d2, d3; - TRACE_FUN(ft_t_any); - - if (segment > ft_last_data_segment) { - TRACE_EXIT zft_capacity; - } - if (segment < ft_first_data_segment) { - TRACE_EXIT 0; - } - d2 = segment - seg_pos; - if (-d2 > 10) { - d1 = segment - ft_first_data_segment; - if (-d2 > d1) { - tape_pos = 0; - seg_pos = ft_first_data_segment; - d2 = d1; - } - } - if (d2 > 10) { - d3 = ft_last_data_segment - segment; - if (d2 > d3) { - tape_pos = zft_capacity; - seg_pos = ft_last_data_segment + 1; - d2 = -d3; - } - } - if (d2 > 0) { - while (seg_pos < segment) { - tape_pos += zft_get_seg_sz(seg_pos++); - } - } else { - while (seg_pos > segment) { - tape_pos -= zft_get_seg_sz(--seg_pos); - } - } - TRACE(ft_t_noise, "new cached pos: %d", seg_pos); - - TRACE_EXIT tape_pos; -} - -/* copy Z-label string to buffer, keeps track of the correct offset in - * `buffer' - */ -void zft_update_label(__u8 *buffer) -{ - TRACE_FUN(ft_t_flow); - - if (strncmp(&buffer[FT_LABEL], ZFTAPE_LABEL, - sizeof(ZFTAPE_LABEL)-1) != 0) { - TRACE(ft_t_info, "updating label from \"%s\" to \"%s\"", - &buffer[FT_LABEL], ZFTAPE_LABEL); - strcpy(&buffer[FT_LABEL], ZFTAPE_LABEL); - memset(&buffer[FT_LABEL] + sizeof(ZFTAPE_LABEL) - 1, ' ', - FT_LABEL_SZ - sizeof(ZFTAPE_LABEL + 1)); - PUT4(buffer, FT_LABEL_DATE, 0); - zft_label_changed = zft_header_changed = 1; /* changed */ - } - TRACE_EXIT; -} - -int zft_verify_write_segments(unsigned int segment, - __u8 *data, size_t size, - __u8 *buffer) -{ - int result; - __u8 *write_buf; - __u8 *src_buf; - int single; - int seg_pos; - int seg_sz; - int remaining; - ft_write_mode_t write_mode; - TRACE_FUN(ft_t_flow); - - seg_pos = segment; - seg_sz = zft_get_seg_sz(seg_pos); - src_buf = data; - single = size <= seg_sz; - remaining = size; - do { - TRACE(ft_t_noise, "\n" - KERN_INFO "remaining: %d\n" - KERN_INFO "seg_sz : %d\n" - KERN_INFO "segment : %d", - remaining, seg_sz, seg_pos); - if (remaining == seg_sz) { - write_buf = src_buf; - write_mode = single ? FT_WR_SINGLE : FT_WR_MULTI; - remaining = 0; - } else if (remaining > seg_sz) { - write_buf = src_buf; - write_mode = FT_WR_ASYNC; /* don't start tape */ - remaining -= seg_sz; - } else { /* remaining < seg_sz */ - write_buf = buffer; - memcpy(write_buf, src_buf, remaining); - memset(&write_buf[remaining],'\0',seg_sz-remaining); - write_mode = single ? FT_WR_SINGLE : FT_WR_MULTI; - remaining = 0; - } - if ((result = ftape_write_segment(seg_pos, - write_buf, - write_mode)) != seg_sz) { - TRACE(ft_t_err, "Error: " - "Couldn't write segment %d", seg_pos); - TRACE_EXIT result < 0 ? result : -EIO; /* bail out */ - } - zft_written_segments ++; - seg_sz = zft_get_seg_sz(++seg_pos); - src_buf += result; - } while (remaining > 0); - if (ftape_get_status()->fti_state == writing) { - TRACE_CATCH(ftape_loop_until_writes_done(),); - TRACE_CATCH(ftape_abort_operation(),); - zft_prevent_flush(); - } - seg_pos = segment; - src_buf = data; - remaining = size; - do { - TRACE_CATCH(result = ftape_read_segment(seg_pos, buffer, - single ? FT_RD_SINGLE - : FT_RD_AHEAD),); - if (memcmp(src_buf, buffer, - remaining > result ? result : remaining) != 0) { - TRACE_ABORT(-EIO, ft_t_err, - "Failed to verify written segment %d", - seg_pos); - } - remaining -= result; - TRACE(ft_t_noise, "verify successful:\n" - KERN_INFO "segment : %d\n" - KERN_INFO "segsize : %d\n" - KERN_INFO "remaining: %d", - seg_pos, result, remaining); - src_buf += seg_sz; - seg_pos++; - } while (remaining > 0); - TRACE_EXIT size; -} - - -/* zft_erase(). implemented compression-handling - * - * calculate the first data-segment when using/not using compression. - * - * update header-segment and compression-map-segment. - */ -int zft_erase(void) -{ - int result = 0; - TRACE_FUN(ft_t_flow); - - if (!zft_header_read) { - TRACE_CATCH(zft_vmalloc_once((void **)&zft_hseg_buf, - FT_SEGMENT_SIZE),); - /* no need to read the vtbl and compression map */ - TRACE_CATCH(ftape_read_header_segment(zft_hseg_buf),); - if ((zft_old_ftape = - zft_ftape_validate_label(&zft_hseg_buf[FT_LABEL]))) { - zft_ftape_extract_file_marks(zft_hseg_buf); - } - TRACE(ft_t_noise, - "ft_first_data_segment: %d, ft_last_data_segment: %d", - ft_first_data_segment, ft_last_data_segment); - zft_qic113 = (ft_format_code != fmt_normal && - ft_format_code != fmt_1100ft && - ft_format_code != fmt_425ft); - } - if (zft_old_ftape) { - zft_clear_ftape_file_marks(); - zft_old_ftape = 0; /* no longer old ftape */ - } - PUT2(zft_hseg_buf, FT_CMAP_START, 0); - zft_volume_table_changed = 1; - zft_capacity = zft_get_capacity(); - zft_init_vtbl(); - /* the rest must be done in ftape_update_header_segments - */ - zft_header_read = 1; - zft_header_changed = 1; /* force update of timestamp */ - result = zft_update_header_segments(); - - ftape_abort_operation(); - - zft_reset_position(&zft_pos); - zft_set_flags (zft_unit); - TRACE_EXIT result; -} - -unsigned int zft_get_time(void) -{ - unsigned int date = FT_TIME_STAMP(2097, 11, 30, 23, 59, 59); /* fun */ - return date; -} diff --git a/drivers/char/ftape/zftape/zftape-rw.h b/drivers/char/ftape/zftape/zftape-rw.h deleted file mode 100644 index 1ceec22b60b..00000000000 --- a/drivers/char/ftape/zftape/zftape-rw.h +++ /dev/null @@ -1,101 +0,0 @@ -#ifndef _ZFTAPE_RW_H -#define _ZFTAPE_RW_H - -/* - * Copyright (C) 1996, 1997 Claus-Justus Heine. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; see the file COPYING. If not, write to - the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - - * - * $Source: /homes/cvs/ftape-stacked/ftape/zftape/zftape-rw.h,v $ - * $Revision: 1.2 $ - * $Date: 1997/10/05 19:19:09 $ - * - * This file contains the definitions for the read and write - * functions for the QIC-117 floppy-tape driver for Linux. - * - */ - -#include "../zftape/zftape-buffers.h" - -#define SEGMENTS_PER_TAPE (ft_segments_per_track * ft_tracks_per_tape) - -/* QIC-113 Rev. G says that `a maximum of 63488 raw bytes may be - * compressed into a single frame'. - * Maybe we should stick to 32kb to make it more `beautiful' - */ -#define ZFT_MAX_BLK_SZ (62*1024) /* bytes */ -#if !defined(CONFIG_ZFT_DFLT_BLK_SZ) -# define CONFIG_ZFT_DFLT_BLK_SZ (10*1024) /* bytes, default of gnu tar */ -#elif CONFIG_ZFT_DFLT_BLK_SZ == 0 -# undef CONFIG_ZFT_DFLT_BLK_SZ -# define CONFIG_ZFT_DFLT_BLK_SZ 1 -#elif (CONFIG_ZFT_DFLT_BLK_SZ % 1024) != 0 -# error CONFIG_ZFT_DFLT_BLK_SZ must be 1 or a multiple of 1024 -#endif -/* The *optional* compression routines need some overhead per tape - * block for their purposes. Instead of asking the actual compression - * implementation how much it needs, we restrict this overhead to be - * maximal of ZFT_CMPT_OVERHEAD size. We need this for EOT - * conditions. The tape is assumed to be logical at EOT when the - * distance from the physical EOT is less than - * one tape block + ZFT_CMPR_OVERHEAD - */ -#define ZFT_CMPR_OVERHEAD 16 /* bytes */ - -typedef enum -{ - zft_idle = 0, - zft_reading, - zft_writing, -} zft_status_enum; - -typedef struct /* all values measured in bytes */ -{ - int seg_pos; /* segment currently positioned at */ - int seg_byte_pos; /* offset in current segment */ - __s64 tape_pos; /* real offset from BOT */ - __s64 volume_pos; /* pos. in uncompressed data stream in - * current volume - */ -} zft_position; - -extern zft_position zft_pos; -extern __u8 *zft_deblock_buf; -extern __u8 *zft_hseg_buf; -extern int zft_deblock_segment; -extern zft_status_enum zft_io_state; -extern int zft_header_changed; -extern int zft_qic113; /* conform to old specs. and old zftape */ -extern int zft_use_compression; -extern unsigned int zft_blk_sz; -extern __s64 zft_capacity; -extern unsigned int zft_written_segments; -extern int zft_label_changed; - -/* zftape-rw.c exported functions - */ -extern unsigned int zft_get_seg_sz(unsigned int segment); -extern void zft_set_flags(unsigned int minor_unit); -extern int zft_calc_seg_byte_coord(int *seg_byte_pos, __s64 tape_pos); -extern __s64 zft_calc_tape_pos(int segment); -extern __s64 zft_get_capacity(void); -extern void zft_update_label(__u8 *buffer); -extern int zft_erase(void); -extern int zft_verify_write_segments(unsigned int segment, - __u8 *data, size_t size, __u8 *buffer); -extern unsigned int zft_get_time(void); -#endif /* _ZFTAPE_RW_H */ - diff --git a/drivers/char/ftape/zftape/zftape-vtbl.c b/drivers/char/ftape/zftape/zftape-vtbl.c deleted file mode 100644 index ad7f8be6340..00000000000 --- a/drivers/char/ftape/zftape/zftape-vtbl.c +++ /dev/null @@ -1,757 +0,0 @@ -/* - * Copyright (c) 1995-1997 Claus-Justus Heine - - This program is free software; you can redistribute it and/or - modify it under the terms of the GNU General Public License as - published by the Free Software Foundation; either version 2, or (at - your option) any later version. - - This program is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; see the file COPYING. If not, write to - the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, - USA. - - * - * $Source: /homes/cvs/ftape-stacked/ftape/zftape/zftape-vtbl.c,v $ - * $Revision: 1.7.6.1 $ - * $Date: 1997/11/24 13:48:31 $ - * - * This file defines a volume table as defined in various QIC - * standards. - * - * This is a minimal implementation, just allowing ordinary DOS - * :( prgrams to identify the cartridge as used. - */ - -#include <linux/errno.h> -#include <linux/mm.h> -#include <linux/slab.h> - -#include <linux/zftape.h> -#include "../zftape/zftape-init.h" -#include "../zftape/zftape-eof.h" -#include "../zftape/zftape-ctl.h" -#include "../zftape/zftape-write.h" -#include "../zftape/zftape-read.h" -#include "../zftape/zftape-rw.h" -#include "../zftape/zftape-vtbl.h" - -#define ZFT_CMAP_HACK /* leave this defined to hide the compression map */ - -/* - * global variables - */ -int zft_qic_mode = 1; /* use the vtbl */ -int zft_old_ftape; /* prevents old ftaped tapes to be overwritten */ -int zft_volume_table_changed; /* for write_header_segments() */ - -/* - * private variables (only exported for inline functions) - */ -LIST_HEAD(zft_vtbl); - -/* We could also allocate these dynamically when extracting the volume table - * sizeof(zft_volinfo) is about 32 or something close to that - */ -static zft_volinfo tape_vtbl; -static zft_volinfo eot_vtbl; -static zft_volinfo *cur_vtbl; - -static inline void zft_new_vtbl_entry(void) -{ - struct list_head *tmp = &zft_last_vtbl->node; - zft_volinfo *new = zft_kmalloc(sizeof(zft_volinfo)); - - list_add(&new->node, tmp); - new->count = zft_eom_vtbl->count ++; -} - -void zft_free_vtbl(void) -{ - for (;;) { - struct list_head *tmp = zft_vtbl.prev; - zft_volinfo *vtbl; - - if (tmp == &zft_vtbl) - break; - list_del(tmp); - vtbl = list_entry(tmp, zft_volinfo, node); - zft_kfree(vtbl, sizeof(zft_volinfo)); - } - INIT_LIST_HEAD(&zft_vtbl); - cur_vtbl = NULL; -} - -/* initialize vtbl, called by ftape_new_cartridge() - */ -void zft_init_vtbl(void) -{ - zft_volinfo *new; - - zft_free_vtbl(); - - /* Create the two dummy vtbl entries - */ - new = zft_kmalloc(sizeof(zft_volinfo)); - list_add(&new->node, &zft_vtbl); - new = zft_kmalloc(sizeof(zft_volinfo)); - list_add(&new->node, &zft_vtbl); - zft_head_vtbl->end_seg = ft_first_data_segment; - zft_head_vtbl->blk_sz = zft_blk_sz; - zft_head_vtbl->count = -1; - zft_eom_vtbl->start_seg = ft_first_data_segment + 1; - zft_eom_vtbl->end_seg = ft_last_data_segment + 1; - zft_eom_vtbl->blk_sz = zft_blk_sz; - zft_eom_vtbl->count = 0; - - /* Reset the pointer for zft_find_volume() - */ - cur_vtbl = zft_eom_vtbl; - - /* initialize the dummy vtbl entries for zft_qic_mode == 0 - */ - eot_vtbl.start_seg = ft_last_data_segment + 1; - eot_vtbl.end_seg = ft_last_data_segment + 1; - eot_vtbl.blk_sz = zft_blk_sz; - eot_vtbl.count = -1; - tape_vtbl.start_seg = ft_first_data_segment; - tape_vtbl.end_seg = ft_last_data_segment; - tape_vtbl.blk_sz = zft_blk_sz; - tape_vtbl.size = zft_capacity; - tape_vtbl.count = 0; -} - -/* check for a valid VTBL signature. - */ -static int vtbl_signature_valid(__u8 signature[4]) -{ - const char *vtbl_ids[] = VTBL_IDS; /* valid signatures */ - int j; - - for (j = 0; - (j < NR_ITEMS(vtbl_ids)) && (memcmp(signature, vtbl_ids[j], 4) != 0); - j++); - return j < NR_ITEMS(vtbl_ids); -} - -/* We used to store the block-size of the volume in the volume-label, - * using the keyword "blocksize". The blocksize written to the - * volume-label is in bytes. - * - * We use this now only for compatibility with old zftape version. We - * store the blocksize directly as binary number in the vendor - * extension part of the volume entry. - */ -static int check_volume_label(const char *label, int *blk_sz) -{ - int valid_format; - char *blocksize; - TRACE_FUN(ft_t_flow); - - TRACE(ft_t_noise, "called with \"%s\" / \"%s\"", label, ZFT_VOL_NAME); - if (strncmp(label, ZFT_VOL_NAME, strlen(ZFT_VOL_NAME)) != 0) { - *blk_sz = 1; /* smallest block size that we allow */ - valid_format = 0; - } else { - TRACE(ft_t_noise, "got old style zftape vtbl entry"); - /* get the default blocksize */ - /* use the kernel strstr() */ - blocksize= strstr(label, " blocksize "); - if (blocksize) { - blocksize += strlen(" blocksize "); - for(*blk_sz= 0; - *blocksize >= '0' && *blocksize <= '9'; - blocksize++) { - *blk_sz *= 10; - *blk_sz += *blocksize - '0'; - } - if (*blk_sz > ZFT_MAX_BLK_SZ) { - *blk_sz= 1; - valid_format= 0; - } else { - valid_format = 1; - } - } else { - *blk_sz= 1; - valid_format= 0; - } - } - TRACE_EXIT valid_format; -} - -/* check for a zftape volume - */ -static int check_volume(__u8 *entry, zft_volinfo *volume) -{ - TRACE_FUN(ft_t_flow); - - if(strncmp(&entry[VTBL_EXT+EXT_ZFTAPE_SIG], ZFTAPE_SIG, - strlen(ZFTAPE_SIG)) == 0) { - TRACE(ft_t_noise, "got new style zftape vtbl entry"); - volume->blk_sz = GET2(entry, VTBL_EXT+EXT_ZFTAPE_BLKSZ); - volume->qic113 = entry[VTBL_EXT+EXT_ZFTAPE_QIC113]; - TRACE_EXIT 1; - } else { - TRACE_EXIT check_volume_label(&entry[VTBL_DESC], &volume->blk_sz); - } -} - - -/* create zftape specific vtbl entry, the volume bounds are inserted - * in the calling function, zft_create_volume_headers() - */ -static void create_zft_volume(__u8 *entry, zft_volinfo *vtbl) -{ - TRACE_FUN(ft_t_flow); - - memset(entry, 0, VTBL_SIZE); - memcpy(&entry[VTBL_SIG], VTBL_ID, 4); - sprintf(&entry[VTBL_DESC], ZFT_VOL_NAME" %03d", vtbl->count); - entry[VTBL_FLAGS] = (VTBL_FL_NOT_VERIFIED | VTBL_FL_SEG_SPANNING); - entry[VTBL_M_NO] = 1; /* multi_cartridge_count */ - strcpy(&entry[VTBL_EXT+EXT_ZFTAPE_SIG], ZFTAPE_SIG); - PUT2(entry, VTBL_EXT+EXT_ZFTAPE_BLKSZ, vtbl->blk_sz); - if (zft_qic113) { - PUT8(entry, VTBL_DATA_SIZE, vtbl->size); - entry[VTBL_CMPR] = VTBL_CMPR_UNREG; - if (vtbl->use_compression) { /* use compression: */ - entry[VTBL_CMPR] |= VTBL_CMPR_USED; - } - entry[VTBL_EXT+EXT_ZFTAPE_QIC113] = 1; - } else { - PUT4(entry, VTBL_DATA_SIZE, vtbl->size); - entry[VTBL_K_CMPR] = VTBL_CMPR_UNREG; - if (vtbl->use_compression) { /* use compression: */ - entry[VTBL_K_CMPR] |= VTBL_CMPR_USED; - } - } - if (ft_format_code == fmt_big) { - /* SCSI like vtbl, store the number of used - * segments as 4 byte value - */ - PUT4(entry, VTBL_SCSI_SEGS, vtbl->end_seg-vtbl->start_seg + 1); - } else { - /* normal, QIC-80MC like vtbl - */ - PUT2(entry, VTBL_START, vtbl->start_seg); - PUT2(entry, VTBL_END, vtbl->end_seg); - } - TRACE_EXIT; -} - -/* this one creates the volume headers for each volume. It is assumed - * that buffer already contains the old volume-table, so that vtbl - * entries without the zft_volume flag set can savely be ignored. - */ -static void zft_create_volume_headers(__u8 *buffer) -{ - __u8 *entry; - struct list_head *tmp; - zft_volinfo *vtbl; - TRACE_FUN(ft_t_flow); - -#ifdef ZFT_CMAP_HACK - if((strncmp(&buffer[VTBL_EXT+EXT_ZFTAPE_SIG], ZFTAPE_SIG, - strlen(ZFTAPE_SIG)) == 0) && - buffer[VTBL_EXT+EXT_ZFTAPE_CMAP] != 0) { - TRACE(ft_t_noise, "deleting cmap volume"); - memmove(buffer, buffer + VTBL_SIZE, - FT_SEGMENT_SIZE - VTBL_SIZE); - } -#endif - entry = buffer; - for (tmp = zft_head_vtbl->node.next; - tmp != &zft_eom_vtbl->node; - tmp = tmp->next) { - vtbl = list_entry(tmp, zft_volinfo, node); - /* we now fill in the values only for newly created volumes. - */ - if (vtbl->new_volume) { - create_zft_volume(entry, vtbl); - vtbl->new_volume = 0; /* clear the flag */ - } - - DUMP_VOLINFO(ft_t_noise, &entry[VTBL_DESC], vtbl); - entry += VTBL_SIZE; - } - memset(entry, 0, FT_SEGMENT_SIZE - zft_eom_vtbl->count * VTBL_SIZE); - TRACE_EXIT; -} - -/* write volume table to tape. Calls zft_create_volume_headers() - */ -int zft_update_volume_table(unsigned int segment) -{ - int result = 0; - __u8 *verify_buf = NULL; - TRACE_FUN(ft_t_flow); - - TRACE_CATCH(result = ftape_read_segment(ft_first_data_segment, - zft_deblock_buf, - FT_RD_SINGLE),); - zft_create_volume_headers(zft_deblock_buf); - TRACE(ft_t_noise, "writing volume table segment %d", segment); - if (zft_vmalloc_once(&verify_buf, FT_SEGMENT_SIZE) == 0) { - TRACE_CATCH(zft_verify_write_segments(segment, - zft_deblock_buf, result, - verify_buf), - zft_vfree(&verify_buf, FT_SEGMENT_SIZE)); - zft_vfree(&verify_buf, FT_SEGMENT_SIZE); - } else { - TRACE_CATCH(ftape_write_segment(segment, zft_deblock_buf, - FT_WR_SINGLE),); - } - TRACE_EXIT 0; -} - -/* non zftape volumes are handled in raw mode. Thus we need to - * calculate the raw amount of data contained in those segments. - */ -static void extract_alien_volume(__u8 *entry, zft_volinfo *vtbl) -{ - TRACE_FUN(ft_t_flow); - - vtbl->size = (zft_calc_tape_pos(zft_last_vtbl->end_seg+1) - - zft_calc_tape_pos(zft_last_vtbl->start_seg)); - vtbl->use_compression = 0; - vtbl->qic113 = zft_qic113; - if (vtbl->qic113) { - TRACE(ft_t_noise, - "Fake alien volume's size from " LL_X " to " LL_X, - LL(GET8(entry, VTBL_DATA_SIZE)), LL(vtbl->size)); - } else { - TRACE(ft_t_noise, - "Fake alien volume's size from %d to " LL_X, - (int)GET4(entry, VTBL_DATA_SIZE), LL(vtbl->size)); - } - TRACE_EXIT; -} - - -/* extract an zftape specific volume - */ -static void extract_zft_volume(__u8 *entry, zft_volinfo *vtbl) -{ - TRACE_FUN(ft_t_flow); - - if (vtbl->qic113) { - vtbl->size = GET8(entry, VTBL_DATA_SIZE); - vtbl->use_compression = - (entry[VTBL_CMPR] & VTBL_CMPR_USED) != 0; - } else { - vtbl->size = GET4(entry, VTBL_DATA_SIZE); - if (entry[VTBL_K_CMPR] & VTBL_CMPR_UNREG) { - vtbl->use_compression = - (entry[VTBL_K_CMPR] & VTBL_CMPR_USED) != 0; - } else if (entry[VTBL_CMPR] & VTBL_CMPR_UNREG) { - vtbl->use_compression = - (entry[VTBL_CMPR] & VTBL_CMPR_USED) != 0; - } else { - TRACE(ft_t_warn, "Geeh! There is something wrong:\n" - KERN_INFO "QIC compression (Rev = K): %x\n" - KERN_INFO "QIC compression (Rev > K): %x", - entry[VTBL_K_CMPR], entry[VTBL_CMPR]); - } - } - TRACE_EXIT; -} - -/* extract the volume table from buffer. "buffer" must already contain - * the vtbl-segment - */ -int zft_extract_volume_headers(__u8 *buffer) -{ - __u8 *entry; - TRACE_FUN(ft_t_flow); - - zft_init_vtbl(); - entry = buffer; -#ifdef ZFT_CMAP_HACK - if ((strncmp(&entry[VTBL_EXT+EXT_ZFTAPE_SIG], ZFTAPE_SIG, - strlen(ZFTAPE_SIG)) == 0) && - entry[VTBL_EXT+EXT_ZFTAPE_CMAP] != 0) { - TRACE(ft_t_noise, "ignoring cmap volume"); - entry += VTBL_SIZE; - } -#endif - /* the end of the vtbl is indicated by an invalid signature - */ - while (vtbl_signature_valid(&entry[VTBL_SIG]) && - (entry - buffer) < FT_SEGMENT_SIZE) { - zft_new_vtbl_entry(); - if (ft_format_code == fmt_big) { - /* SCSI like vtbl, stores only the number of - * segments used - */ - unsigned int num_segments= GET4(entry, VTBL_SCSI_SEGS); - zft_last_vtbl->start_seg = zft_eom_vtbl->start_seg; - zft_last_vtbl->end_seg = - zft_last_vtbl->start_seg + num_segments - 1; - } else { - /* `normal', QIC-80 like vtbl - */ - zft_last_vtbl->start_seg = GET2(entry, VTBL_START); - zft_last_vtbl->end_seg = GET2(entry, VTBL_END); - } - zft_eom_vtbl->start_seg = zft_last_vtbl->end_seg + 1; - /* check if we created this volume and get the - * blk_sz - */ - zft_last_vtbl->zft_volume = check_volume(entry, zft_last_vtbl); - if (zft_last_vtbl->zft_volume == 0) { - extract_alien_volume(entry, zft_last_vtbl); - } else { - extract_zft_volume(entry, zft_last_vtbl); - } - DUMP_VOLINFO(ft_t_noise, &entry[VTBL_DESC], zft_last_vtbl); - entry +=VTBL_SIZE; - } -#if 0 -/* - * undefine to test end of tape handling - */ - zft_new_vtbl_entry(); - zft_last_vtbl->start_seg = zft_eom_vtbl->start_seg; - zft_last_vtbl->end_seg = ft_last_data_segment - 10; - zft_last_vtbl->blk_sz = zft_blk_sz; - zft_last_vtbl->zft_volume = 1; - zft_last_vtbl->qic113 = zft_qic113; - zft_last_vtbl->size = (zft_calc_tape_pos(zft_last_vtbl->end_seg+1) - - zft_calc_tape_pos(zft_last_vtbl->start_seg)); -#endif - TRACE_EXIT 0; -} - -/* this functions translates the failed_sector_log, misused as - * EOF-marker list, into a virtual volume table. The table mustn't be - * written to tape, because this would occupy the first data segment, - * which should be the volume table, but is actually the first segment - * that is filled with data (when using standard ftape). We assume, - * that we get a non-empty failed_sector_log. - */ -int zft_fake_volume_headers (eof_mark_union *eof_map, int num_failed_sectors) -{ - unsigned int segment, sector; - int have_eom = 0; - int vol_no; - TRACE_FUN(ft_t_flow); - - if ((num_failed_sectors >= 2) && - (GET2(&eof_map[num_failed_sectors - 1].mark.segment, 0) - == - GET2(&eof_map[num_failed_sectors - 2].mark.segment, 0) + 1) && - (GET2(&eof_map[num_failed_sectors - 1].mark.date, 0) == 1)) { - /* this should be eom. We keep the remainder of the - * tape as another volume. - */ - have_eom = 1; - } - zft_init_vtbl(); - zft_eom_vtbl->start_seg = ft_first_data_segment; - for(vol_no = 0; vol_no < num_failed_sectors - have_eom; vol_no ++) { - zft_new_vtbl_entry(); - - segment = GET2(&eof_map[vol_no].mark.segment, 0); - sector = GET2(&eof_map[vol_no].mark.date, 0); - - zft_last_vtbl->start_seg = zft_eom_vtbl->start_seg; - zft_last_vtbl->end_seg = segment; - zft_eom_vtbl->start_seg = segment + 1; - zft_last_vtbl->blk_sz = 1; - zft_last_vtbl->size = - (zft_calc_tape_pos(zft_last_vtbl->end_seg) - - zft_calc_tape_pos(zft_last_vtbl->start_seg) - + (sector-1) * FT_SECTOR_SIZE); - TRACE(ft_t_noise, - "failed sector log: segment: %d, sector: %d", - segment, sector); - DUMP_VOLINFO(ft_t_noise, "Faked volume", zft_last_vtbl); - } - if (!have_eom) { - zft_new_vtbl_entry(); - zft_last_vtbl->start_seg = zft_eom_vtbl->start_seg; - zft_last_vtbl->end_seg = ft_last_data_segment; - zft_eom_vtbl->start_seg = ft_last_data_segment + 1; - zft_last_vtbl->size = zft_capacity; - zft_last_vtbl->size -= zft_calc_tape_pos(zft_last_vtbl->start_seg); - zft_last_vtbl->blk_sz = 1; - DUMP_VOLINFO(ft_t_noise, "Faked volume",zft_last_vtbl); - } - TRACE_EXIT 0; -} - -/* update the internal volume table - * - * if before start of last volume: erase all following volumes if - * inside a volume: set end of volume to infinity - * - * this function is intended to be called every time _ftape_write() is - * called - * - * return: 0 if no new volume was created, 1 if a new volume was - * created - * - * NOTE: we don't need to check for zft_mode as ftape_write() does - * that already. This function gets never called without accessing - * zftape via the *qft* devices - */ - -int zft_open_volume(zft_position *pos, int blk_sz, int use_compression) -{ - TRACE_FUN(ft_t_flow); - - if (!zft_qic_mode) { - TRACE_EXIT 0; - } - if (zft_tape_at_lbot(pos)) { - zft_init_vtbl(); - if(zft_old_ftape) { - /* clear old ftape's eof marks */ - zft_clear_ftape_file_marks(); - zft_old_ftape = 0; /* no longer old ftape */ - } - zft_reset_position(pos); - } - if (pos->seg_pos != zft_last_vtbl->end_seg + 1) { - TRACE_ABORT(-EIO, ft_t_bug, - "BUG: seg_pos: %d, zft_last_vtbl->end_seg: %d", - pos->seg_pos, zft_last_vtbl->end_seg); - } - TRACE(ft_t_noise, "create new volume"); - if (zft_eom_vtbl->count >= ZFT_MAX_VOLUMES) { - TRACE_ABORT(-ENOSPC, ft_t_err, - "Error: maxmimal number of volumes exhausted " - "(maxmimum is %d)", ZFT_MAX_VOLUMES); - } - zft_new_vtbl_entry(); - pos->volume_pos = pos->seg_byte_pos = 0; - zft_last_vtbl->start_seg = pos->seg_pos; - zft_last_vtbl->end_seg = ft_last_data_segment; /* infinity */ - zft_last_vtbl->blk_sz = blk_sz; - zft_last_vtbl->size = zft_capacity; - zft_last_vtbl->zft_volume = 1; - zft_last_vtbl->use_compression = use_compression; - zft_last_vtbl->qic113 = zft_qic113; - zft_last_vtbl->new_volume = 1; - zft_last_vtbl->open = 1; - zft_volume_table_changed = 1; - zft_eom_vtbl->start_seg = ft_last_data_segment + 1; - TRACE_EXIT 0; -} - -/* perform mtfsf, mtbsf, not allowed without zft_qic_mode - */ -int zft_skip_volumes(int count, zft_position *pos) -{ - const zft_volinfo *vtbl; - TRACE_FUN(ft_t_flow); - - TRACE(ft_t_noise, "count: %d", count); - - vtbl= zft_find_volume(pos->seg_pos); - while (count > 0 && vtbl != zft_eom_vtbl) { - vtbl = list_entry(vtbl->node.next, zft_volinfo, node); - count --; - } - while (count < 0 && vtbl != zft_first_vtbl) { - vtbl = list_entry(vtbl->node.prev, zft_volinfo, node); - count ++; - } - pos->seg_pos = vtbl->start_seg; - pos->seg_byte_pos = 0; - pos->volume_pos = 0; - pos->tape_pos = zft_calc_tape_pos(pos->seg_pos); - zft_just_before_eof = vtbl->size == 0; - if (zft_cmpr_ops) { - (*zft_cmpr_ops->reset)(); - } - zft_deblock_segment = -1; /* no need to keep cache */ - TRACE(ft_t_noise, "repositioning to:\n" - KERN_INFO "zft_seg_pos : %d\n" - KERN_INFO "zft_seg_byte_pos : %d\n" - KERN_INFO "zft_tape_pos : " LL_X "\n" - KERN_INFO "zft_volume_pos : " LL_X "\n" - KERN_INFO "file number : %d", - pos->seg_pos, pos->seg_byte_pos, - LL(pos->tape_pos), LL(pos->volume_pos), vtbl->count); - zft_resid = count < 0 ? -count : count; - TRACE_EXIT zft_resid ? -EINVAL : 0; -} - -/* the following simply returns the raw data position of the EOM - * marker, MTIOCSIZE ioctl - */ -__s64 zft_get_eom_pos(void) -{ - if (zft_qic_mode) { - return zft_calc_tape_pos(zft_eom_vtbl->start_seg); - } else { - /* there is only one volume in raw mode */ - return zft_capacity; - } -} - -/* skip to eom, used for MTEOM - */ -void zft_skip_to_eom(zft_position *pos) -{ - TRACE_FUN(ft_t_flow); - pos->seg_pos = zft_eom_vtbl->start_seg; - pos->seg_byte_pos = - pos->volume_pos = - zft_just_before_eof = 0; - pos->tape_pos = zft_calc_tape_pos(pos->seg_pos); - TRACE(ft_t_noise, "ftape positioned to segment %d, data pos " LL_X, - pos->seg_pos, LL(pos->tape_pos)); - TRACE_EXIT; -} - -/* write an EOF-marker by setting zft_last_vtbl->end_seg to seg_pos. - * NOTE: this function assumes that zft_last_vtbl points to a valid - * vtbl entry - * - * NOTE: this routine always positions before the EOF marker - */ -int zft_close_volume(zft_position *pos) -{ - TRACE_FUN(ft_t_any); - - if (zft_vtbl_empty || !zft_last_vtbl->open) { /* should not happen */ - TRACE(ft_t_noise, "There are no volumes to finish"); - TRACE_EXIT -EIO; - } - if (pos->seg_byte_pos == 0 && - pos->seg_pos != zft_last_vtbl->start_seg) { - pos->seg_pos --; - pos->seg_byte_pos = zft_get_seg_sz(pos->seg_pos); - } - zft_last_vtbl->end_seg = pos->seg_pos; - zft_last_vtbl->size = pos->volume_pos; - zft_volume_table_changed = 1; - zft_just_before_eof = 1; - zft_eom_vtbl->start_seg = zft_last_vtbl->end_seg + 1; - zft_last_vtbl->open = 0; /* closed */ - TRACE_EXIT 0; -} - -/* write count file-marks at current position. - * - * The tape is positioned after the eof-marker, that is at byte 0 of - * the segment following the eof-marker - * - * this function is only allowed in zft_qic_mode - * - * Only allowed when tape is at BOT or EOD. - */ -int zft_weof(unsigned int count, zft_position *pos) -{ - - TRACE_FUN(ft_t_flow); - - if (!count) { /* write zero EOF marks should be a real no-op */ - TRACE_EXIT 0; - } - zft_volume_table_changed = 1; - if (zft_tape_at_lbot(pos)) { - zft_init_vtbl(); - if(zft_old_ftape) { - /* clear old ftape's eof marks */ - zft_clear_ftape_file_marks(); - zft_old_ftape = 0; /* no longer old ftape */ - } - } - if (zft_last_vtbl->open) { - zft_close_volume(pos); - zft_move_past_eof(pos); - count --; - } - /* now it's easy, just append eof-marks, that is empty - * volumes, to the end of the already recorded media. - */ - while (count > 0 && - pos->seg_pos <= ft_last_data_segment && - zft_eom_vtbl->count < ZFT_MAX_VOLUMES) { - TRACE(ft_t_noise, - "Writing zero sized file at segment %d", pos->seg_pos); - zft_new_vtbl_entry(); - zft_last_vtbl->start_seg = pos->seg_pos; - zft_last_vtbl->end_seg = pos->seg_pos; - zft_last_vtbl->size = 0; - zft_last_vtbl->blk_sz = zft_blk_sz; - zft_last_vtbl->zft_volume = 1; - zft_last_vtbl->use_compression = 0; - pos->tape_pos += zft_get_seg_sz(pos->seg_pos); - zft_eom_vtbl->start_seg = ++ pos->seg_pos; - count --; - } - if (count > 0) { - /* there are two possibilities: end of tape, or the - * maximum number of files is exhausted. - */ - zft_resid = count; - TRACE(ft_t_noise,"Number of marks NOT written: %d", zft_resid); - if (zft_eom_vtbl->count == ZFT_MAX_VOLUMES) { - TRACE_ABORT(-EINVAL, ft_t_warn, - "maximum allowed number of files " - "exhausted: %d", ZFT_MAX_VOLUMES); - } else { - TRACE_ABORT(-ENOSPC, - ft_t_noise, "reached end of tape"); - } - } - TRACE_EXIT 0; -} - -const zft_volinfo *zft_find_volume(unsigned int seg_pos) -{ - TRACE_FUN(ft_t_flow); - - TRACE(ft_t_any, "called with seg_pos %d",seg_pos); - if (!zft_qic_mode) { - if (seg_pos > ft_last_data_segment) { - TRACE_EXIT &eot_vtbl; - } - tape_vtbl.blk_sz = zft_blk_sz; - TRACE_EXIT &tape_vtbl; - } - if (seg_pos < zft_first_vtbl->start_seg) { - TRACE_EXIT (cur_vtbl = zft_first_vtbl); - } - while (seg_pos > cur_vtbl->end_seg) { - cur_vtbl = list_entry(cur_vtbl->node.next, zft_volinfo, node); - TRACE(ft_t_noise, "%d - %d", cur_vtbl->start_seg, cur_vtbl->end_seg); - } - while (seg_pos < cur_vtbl->start_seg) { - cur_vtbl = list_entry(cur_vtbl->node.prev, zft_volinfo, node); - TRACE(ft_t_noise, "%d - %d", cur_vtbl->start_seg, cur_vtbl->end_seg); - } - if (seg_pos > cur_vtbl->end_seg || seg_pos < cur_vtbl->start_seg) { - TRACE(ft_t_bug, "This cannot happen"); - } - DUMP_VOLINFO(ft_t_noise, "", cur_vtbl); - TRACE_EXIT cur_vtbl; -} - -/* this function really assumes that we are just before eof - */ -void zft_move_past_eof(zft_position *pos) -{ - TRACE_FUN(ft_t_flow); - - TRACE(ft_t_noise, "old seg. pos: %d", pos->seg_pos); - pos->tape_pos += zft_get_seg_sz(pos->seg_pos++) - pos->seg_byte_pos; - pos->seg_byte_pos = 0; - pos->volume_pos = 0; - if (zft_cmpr_ops) { - (*zft_cmpr_ops->reset)(); - } - zft_just_before_eof = 0; - zft_deblock_segment = -1; /* no need to cache it anymore */ - TRACE(ft_t_noise, "new seg. pos: %d", pos->seg_pos); - TRACE_EXIT; -} diff --git a/drivers/char/ftape/zftape/zftape-vtbl.h b/drivers/char/ftape/zftape/zftape-vtbl.h deleted file mode 100644 index f31d196d175..00000000000 --- a/drivers/char/ftape/zftape/zftape-vtbl.h +++ /dev/null @@ -1,227 +0,0 @@ -#ifndef _ZFTAPE_VTBL_H -#define _ZFTAPE_VTBL_H - -/* - * Copyright (c) 1995-1997 Claus-Justus Heine - - This program is free software; you can redistribute it and/or - modify it under the terms of the GNU General Public License as - published by the Free Software Foundation; either version 2, or (at - your option) any later version. - - This program is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; see the file COPYING. If not, write to - the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, - USA. - - * - * $Source: /homes/cvs/ftape-stacked/ftape/zftape/zftape-vtbl.h,v $ - * $Revision: 1.3 $ - * $Date: 1997/10/28 14:30:09 $ - * - * This file defines a volume table as defined in the QIC-80 - * development standards. - */ - -#include <linux/list.h> - -#include "../lowlevel/ftape-tracing.h" - -#include "../zftape/zftape-eof.h" -#include "../zftape/zftape-ctl.h" -#include "../zftape/zftape-rw.h" - -#define VTBL_SIZE 128 /* bytes */ - -/* The following are offsets in the vtbl. */ -#define VTBL_SIG 0 -#define VTBL_START 4 -#define VTBL_END 6 -#define VTBL_DESC 8 -#define VTBL_DATE 52 -#define VTBL_FLAGS 56 -#define VTBL_FL_VENDOR_SPECIFIC (1<<0) -#define VTBL_FL_MUTLI_CARTRIDGE (1<<1) -#define VTBL_FL_NOT_VERIFIED (1<<2) -#define VTBL_FL_REDIR_INHIBIT (1<<3) -#define VTBL_FL_SEG_SPANNING (1<<4) -#define VTBL_FL_DIRECTORY_LAST (1<<5) -#define VTBL_FL_RESERVED_6 (1<<6) -#define VTBL_FL_RESERVED_7 (1<<7) -#define VTBL_M_NO 57 -#define VTBL_EXT 58 -#define EXT_ZFTAPE_SIG 0 -#define EXT_ZFTAPE_BLKSZ 10 -#define EXT_ZFTAPE_CMAP 12 -#define EXT_ZFTAPE_QIC113 13 -#define VTBL_PWD 84 -#define VTBL_DIR_SIZE 92 -#define VTBL_DATA_SIZE 96 -#define VTBL_OS_VERSION 104 -#define VTBL_SRC_DRIVE 106 -#define VTBL_DEV 122 -#define VTBL_RESERVED_1 123 -#define VTBL_CMPR 124 -#define VTBL_CMPR_UNREG 0x3f -#define VTBL_CMPR_USED 0x80 -#define VTBL_FMT 125 -#define VTBL_RESERVED_2 126 -#define VTBL_RESERVED_3 127 -/* compatibility with pre revision K */ -#define VTBL_K_CMPR 120 - -/* the next is used by QIC-3020 tapes with format code 6 (>2^16 - * segments) It is specified in QIC-113, Rev. G, Section 5 (SCSI - * volume table). The difference is simply, that we only store the - * number of segments used, not the starting segment. - */ -#define VTBL_SCSI_SEGS 4 /* is a 4 byte value */ - -/* one vtbl is 128 bytes, that results in a maximum number of - * 29*1024/128 = 232 volumes. - */ -#define ZFT_MAX_VOLUMES (FT_SEGMENT_SIZE/VTBL_SIZE) -#define VTBL_ID "VTBL" -#define VTBL_IDS { VTBL_ID, "XTBL", "UTID", "EXVT" } /* other valid ids */ -#define ZFT_VOL_NAME "zftape volume" /* volume label used by me */ -#define ZFTAPE_SIG "LINUX ZFT" - -/* global variables - */ -typedef struct zft_internal_vtbl -{ - struct list_head node; - int count; - unsigned int start_seg; /* 32 bits are enough for now */ - unsigned int end_seg; /* 32 bits are enough for now */ - __s64 size; /* uncompressed size */ - unsigned int blk_sz; /* block size for this volume */ - unsigned int zft_volume :1; /* zftape created this volume */ - unsigned int use_compression:1; /* compressed volume */ - unsigned int qic113 :1; /* layout of compressed block - * info and vtbl conforms to - * QIC-113, Rev. G - */ - unsigned int new_volume :1; /* it was created by us, this - * run. this allows the - * fields that aren't really - * used by zftape to be filled - * in by some user level - * program. - */ - unsigned int open :1; /* just in progress of being - * written - */ -} zft_volinfo; - -extern struct list_head zft_vtbl; -#define zft_head_vtbl list_entry(zft_vtbl.next, zft_volinfo, node) -#define zft_eom_vtbl list_entry(zft_vtbl.prev, zft_volinfo, node) -#define zft_last_vtbl list_entry(zft_eom_vtbl->node.prev, zft_volinfo, node) -#define zft_first_vtbl list_entry(zft_head_vtbl->node.next, zft_volinfo, node) -#define zft_vtbl_empty (zft_eom_vtbl->node.prev == &zft_head_vtbl->node) - -#define DUMP_VOLINFO(level, desc, info) \ -{ \ - char tmp[21]; \ - strlcpy(tmp, desc, sizeof(tmp)); \ - TRACE(level, "Volume %d:\n" \ - KERN_INFO "description : %s\n" \ - KERN_INFO "first segment: %d\n" \ - KERN_INFO "last segment: %d\n" \ - KERN_INFO "size : " LL_X "\n" \ - KERN_INFO "block size : %d\n" \ - KERN_INFO "compression : %d\n" \ - KERN_INFO "zftape volume: %d\n" \ - KERN_INFO "QIC-113 conf.: %d", \ - (info)->count, tmp, (info)->start_seg, (info)->end_seg, \ - LL((info)->size), (info)->blk_sz, \ - (info)->use_compression != 0, (info)->zft_volume != 0, \ - (info)->qic113 != 0); \ -} - -extern int zft_qic_mode; -extern int zft_old_ftape; -extern int zft_volume_table_changed; - -/* exported functions */ -extern void zft_init_vtbl (void); -extern void zft_free_vtbl (void); -extern int zft_extract_volume_headers(__u8 *buffer); -extern int zft_update_volume_table (unsigned int segment); -extern int zft_open_volume (zft_position *pos, - int blk_sz, int use_compression); -extern int zft_close_volume (zft_position *pos); -extern const zft_volinfo *zft_find_volume(unsigned int seg_pos); -extern int zft_skip_volumes (int count, zft_position *pos); -extern __s64 zft_get_eom_pos (void); -extern void zft_skip_to_eom (zft_position *pos); -extern int zft_fake_volume_headers (eof_mark_union *eof_map, - int num_failed_sectors); -extern int zft_weof (unsigned int count, zft_position *pos); -extern void zft_move_past_eof (zft_position *pos); - -static inline int zft_tape_at_eod (const zft_position *pos); -static inline int zft_tape_at_lbot (const zft_position *pos); -static inline void zft_position_before_eof (zft_position *pos, - const zft_volinfo *volume); -static inline __s64 zft_check_for_eof(const zft_volinfo *vtbl, - const zft_position *pos); - -/* this function decrements the zft_seg_pos counter if we are right - * at the beginning of a segment. This is to handle fsfm/bsfm -- we - * need to position before the eof mark. NOTE: zft_tape_pos is not - * changed - */ -static inline void zft_position_before_eof(zft_position *pos, - const zft_volinfo *volume) -{ - TRACE_FUN(ft_t_flow); - - if (pos->seg_pos == volume->end_seg + 1 && pos->seg_byte_pos == 0) { - pos->seg_pos --; - pos->seg_byte_pos = zft_get_seg_sz(pos->seg_pos); - } - TRACE_EXIT; -} - -/* Mmmh. Is the position at the end of the last volume, that is right - * before the last EOF mark also logical an EOD condition? - */ -static inline int zft_tape_at_eod(const zft_position *pos) -{ - TRACE_FUN(ft_t_any); - - if (zft_qic_mode) { - TRACE_EXIT (pos->seg_pos >= zft_eom_vtbl->start_seg || - zft_last_vtbl->open); - } else { - TRACE_EXIT pos->seg_pos > ft_last_data_segment; - } -} - -static inline int zft_tape_at_lbot(const zft_position *pos) -{ - if (zft_qic_mode) { - return (pos->seg_pos <= zft_first_vtbl->start_seg && - pos->volume_pos == 0); - } else { - return (pos->seg_pos <= ft_first_data_segment && - pos->volume_pos == 0); - } -} - -/* This one checks for EOF. return remaing space (may be negative) - */ -static inline __s64 zft_check_for_eof(const zft_volinfo *vtbl, - const zft_position *pos) -{ - return (__s64)(vtbl->size - pos->volume_pos); -} - -#endif /* _ZFTAPE_VTBL_H */ diff --git a/drivers/char/ftape/zftape/zftape-write.c b/drivers/char/ftape/zftape/zftape-write.c deleted file mode 100644 index 94327b8c97b..00000000000 --- a/drivers/char/ftape/zftape/zftape-write.c +++ /dev/null @@ -1,483 +0,0 @@ -/* - * Copyright (C) 1996, 1997 Claus Heine - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; see the file COPYING. If not, write to - the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - - * - * $Source: /homes/cvs/ftape-stacked/ftape/zftape/zftape-write.c,v $ - * $Revision: 1.3 $ - * $Date: 1997/11/06 00:50:29 $ - * - * This file contains the writing code - * for the QIC-117 floppy-tape driver for Linux. - */ - -#include <linux/errno.h> -#include <linux/mm.h> - -#include <linux/zftape.h> - -#include <asm/uaccess.h> - -#include "../zftape/zftape-init.h" -#include "../zftape/zftape-eof.h" -#include "../zftape/zftape-ctl.h" -#include "../zftape/zftape-write.h" -#include "../zftape/zftape-read.h" -#include "../zftape/zftape-rw.h" -#include "../zftape/zftape-vtbl.h" - -/* Global vars. - */ - -/* Local vars. - */ -static int last_write_failed; -static int need_flush; - -void zft_prevent_flush(void) -{ - need_flush = 0; -} - -static int zft_write_header_segments(__u8* buffer) -{ - int header_1_ok = 0; - int header_2_ok = 0; - unsigned int time_stamp; - TRACE_FUN(ft_t_noise); - - TRACE_CATCH(ftape_abort_operation(),); - ftape_seek_to_bot(); /* prevents extra rewind */ - if (GET4(buffer, 0) != FT_HSEG_MAGIC) { - TRACE_ABORT(-EIO, ft_t_err, - "wrong header signature found, aborting"); - } - /* Be optimistic: */ - PUT4(buffer, FT_SEG_CNT, - zft_written_segments + GET4(buffer, FT_SEG_CNT) + 2); - if ((time_stamp = zft_get_time()) != 0) { - PUT4(buffer, FT_WR_DATE, time_stamp); - if (zft_label_changed) { - PUT4(buffer, FT_LABEL_DATE, time_stamp); - } - } - TRACE(ft_t_noise, - "writing first header segment %d", ft_header_segment_1); - header_1_ok = zft_verify_write_segments(ft_header_segment_1, - buffer, FT_SEGMENT_SIZE, - zft_deblock_buf) >= 0; - TRACE(ft_t_noise, - "writing second header segment %d", ft_header_segment_2); - header_2_ok = zft_verify_write_segments(ft_header_segment_2, - buffer, FT_SEGMENT_SIZE, - zft_deblock_buf) >= 0; - if (!header_1_ok) { - TRACE(ft_t_warn, "Warning: " - "update of first header segment failed"); - } - if (!header_2_ok) { - TRACE(ft_t_warn, "Warning: " - "update of second header segment failed"); - } - if (!header_1_ok && !header_2_ok) { - TRACE_ABORT(-EIO, ft_t_err, "Error: " - "update of both header segments failed."); - } - TRACE_EXIT 0; -} - -int zft_update_header_segments(void) -{ - TRACE_FUN(ft_t_noise); - - /* must NOT use zft_write_protected, as it also includes the - * file access mode. But we also want to update when soft - * write protection is enabled (O_RDONLY) - */ - if (ft_write_protected || zft_old_ftape) { - TRACE_ABORT(0, ft_t_noise, "Tape set read-only: no update"); - } - if (!zft_header_read) { - TRACE_ABORT(0, ft_t_noise, "Nothing to update"); - } - if (!zft_header_changed) { - zft_header_changed = zft_written_segments > 0; - } - if (!zft_header_changed && !zft_volume_table_changed) { - TRACE_ABORT(0, ft_t_noise, "Nothing to update"); - } - TRACE(ft_t_noise, "Updating header segments"); - if (ftape_get_status()->fti_state == writing) { - TRACE_CATCH(ftape_loop_until_writes_done(),); - } - TRACE_CATCH(ftape_abort_operation(),); - - zft_deblock_segment = -1; /* invalidate the cache */ - if (zft_header_changed) { - TRACE_CATCH(zft_write_header_segments(zft_hseg_buf),); - } - if (zft_volume_table_changed) { - TRACE_CATCH(zft_update_volume_table(ft_first_data_segment),); - } - zft_header_changed = - zft_volume_table_changed = - zft_label_changed = - zft_written_segments = 0; - TRACE_CATCH(ftape_abort_operation(),); - ftape_seek_to_bot(); - TRACE_EXIT 0; -} - -static int read_merge_buffer(int seg_pos, __u8 *buffer, int offset, int seg_sz) -{ - int result = 0; - const ft_trace_t old_tracing = TRACE_LEVEL; - TRACE_FUN(ft_t_flow); - - if (zft_qic_mode) { - /* writing in the middle of a volume is NOT allowed - * - */ - TRACE(ft_t_noise, "No need to read a segment"); - memset(buffer + offset, 0, seg_sz - offset); - TRACE_EXIT 0; - } - TRACE(ft_t_any, "waiting"); - ftape_start_writing(FT_WR_MULTI); - TRACE_CATCH(ftape_loop_until_writes_done(),); - - TRACE(ft_t_noise, "trying to read segment %d from offset %d", - seg_pos, offset); - SET_TRACE_LEVEL(ft_t_bug); - result = zft_fetch_segment_fraction(seg_pos, buffer, - FT_RD_SINGLE, - offset, seg_sz - offset); - SET_TRACE_LEVEL(old_tracing); - if (result != (seg_sz - offset)) { - TRACE(ft_t_noise, "Ignore error: read_segment() result: %d", - result); - memset(buffer + offset, 0, seg_sz - offset); - } - TRACE_EXIT 0; -} - -/* flush the write buffer to tape and write an eof-marker at the - * current position if not in raw mode. This function always - * positions the tape before the eof-marker. _ftape_close() should - * then advance to the next segment. - * - * the parameter "finish_volume" describes whether to position before - * or after the possibly created file-mark. We always position after - * the file-mark when called from ftape_close() and a flush was needed - * (that is ftape_write() was the last tape operation before calling - * ftape_flush) But we always position before the file-mark when this - * function get's called from outside ftape_close() - */ -int zft_flush_buffers(void) -{ - int result; - int data_remaining; - int this_segs_size; - TRACE_FUN(ft_t_flow); - - TRACE(ft_t_data_flow, - "entered, ftape_state = %d", ftape_get_status()->fti_state); - if (ftape_get_status()->fti_state != writing && !need_flush) { - TRACE_ABORT(0, ft_t_noise, "no need for flush"); - } - zft_io_state = zft_idle; /* triggers some initializations for the - * read and write routines - */ - if (last_write_failed) { - ftape_abort_operation(); - TRACE_EXIT -EIO; - } - TRACE(ft_t_noise, "flushing write buffers"); - this_segs_size = zft_get_seg_sz(zft_pos.seg_pos); - if (this_segs_size == zft_pos.seg_byte_pos) { - zft_pos.seg_pos ++; - data_remaining = zft_pos.seg_byte_pos = 0; - } else { - data_remaining = zft_pos.seg_byte_pos; - } - /* If there is any data not written to tape yet, append zero's - * up to the end of the sector (if using compression) or merge - * it with the data existing on the tape Then write the - * segment(s) to tape. - */ - TRACE(ft_t_noise, "Position:\n" - KERN_INFO "seg_pos : %d\n" - KERN_INFO "byte pos : %d\n" - KERN_INFO "remaining: %d", - zft_pos.seg_pos, zft_pos.seg_byte_pos, data_remaining); - if (data_remaining > 0) { - do { - this_segs_size = zft_get_seg_sz(zft_pos.seg_pos); - if (this_segs_size > data_remaining) { - TRACE_CATCH(read_merge_buffer(zft_pos.seg_pos, - zft_deblock_buf, - data_remaining, - this_segs_size), - last_write_failed = 1); - } - result = ftape_write_segment(zft_pos.seg_pos, - zft_deblock_buf, - FT_WR_MULTI); - if (result != this_segs_size) { - TRACE(ft_t_err, "flush buffers failed"); - zft_pos.tape_pos -= zft_pos.seg_byte_pos; - zft_pos.seg_byte_pos = 0; - - last_write_failed = 1; - TRACE_EXIT result; - } - zft_written_segments ++; - TRACE(ft_t_data_flow, - "flush, moved out buffer: %d", result); - /* need next segment for more data (empty segments?) - */ - if (result < data_remaining) { - if (result > 0) { - /* move remainder to buffer beginning - */ - memmove(zft_deblock_buf, - zft_deblock_buf + result, - FT_SEGMENT_SIZE - result); - } - } - data_remaining -= result; - zft_pos.seg_pos ++; - } while (data_remaining > 0); - TRACE(ft_t_any, "result: %d", result); - zft_deblock_segment = --zft_pos.seg_pos; - if (data_remaining == 0) { /* first byte next segment */ - zft_pos.seg_byte_pos = this_segs_size; - } else { /* after data previous segment, data_remaining < 0 */ - zft_pos.seg_byte_pos = data_remaining + result; - } - } else { - TRACE(ft_t_noise, "zft_deblock_buf empty"); - zft_pos.seg_pos --; - zft_pos.seg_byte_pos = zft_get_seg_sz (zft_pos.seg_pos); - ftape_start_writing(FT_WR_MULTI); - } - TRACE(ft_t_any, "waiting"); - if ((result = ftape_loop_until_writes_done()) < 0) { - /* that's really bad. What to to with zft_tape_pos? - */ - TRACE(ft_t_err, "flush buffers failed"); - } - TRACE(ft_t_any, "zft_seg_pos: %d, zft_seg_byte_pos: %d", - zft_pos.seg_pos, zft_pos.seg_byte_pos); - last_write_failed = - need_flush = 0; - TRACE_EXIT result; -} - -/* return-value: the number of bytes removed from the user-buffer - * - * out: - * int *write_cnt: how much actually has been moved to the - * zft_deblock_buf - * int req_len : MUST NOT BE CHANGED, except at EOT, in - * which case it may be adjusted - * in : - * char *buff : the user buffer - * int buf_pos_write : copy of buf_len_wr int - * this_segs_size : the size in bytes of the actual segment - * char - * *zft_deblock_buf : zft_deblock_buf - */ -static int zft_simple_write(int *cnt, - __u8 *dst_buf, const int seg_sz, - const __u8 __user *src_buf, const int req_len, - const zft_position *pos,const zft_volinfo *volume) -{ - int space_left; - TRACE_FUN(ft_t_flow); - - /* volume->size holds the tape capacity while volume is open */ - if (pos->tape_pos + volume->blk_sz > volume->size) { - TRACE_EXIT -ENOSPC; - } - /* remaining space in this segment, NOT zft_deblock_buf - */ - space_left = seg_sz - pos->seg_byte_pos; - *cnt = req_len < space_left ? req_len : space_left; - if (copy_from_user(dst_buf + pos->seg_byte_pos, src_buf, *cnt) != 0) { - TRACE_EXIT -EFAULT; - } - TRACE_EXIT *cnt; -} - -static int check_write_access(int req_len, - const zft_volinfo **volume, - zft_position *pos, - const unsigned int blk_sz) -{ - int result; - TRACE_FUN(ft_t_flow); - - if ((req_len % zft_blk_sz) != 0) { - TRACE_ABORT(-EINVAL, ft_t_info, - "write-count %d must be multiple of block-size %d", - req_len, blk_sz); - } - if (zft_io_state == zft_writing) { - /* all other error conditions have been checked earlier - */ - TRACE_EXIT 0; - } - zft_io_state = zft_idle; - TRACE_CATCH(zft_check_write_access(pos),); - /* If we haven't read the header segment yet, do it now. - * This will verify the configuration, get the bad sector - * table and read the volume table segment - */ - if (!zft_header_read) { - TRACE_CATCH(zft_read_header_segments(),); - } - /* fine. Now the tape is either at BOT or at EOD, - * Write start of volume now - */ - TRACE_CATCH(zft_open_volume(pos, blk_sz, zft_use_compression),); - *volume = zft_find_volume(pos->seg_pos); - DUMP_VOLINFO(ft_t_noise, "", *volume); - zft_just_before_eof = 0; - /* now merge with old data if necessary */ - if (!zft_qic_mode && pos->seg_byte_pos != 0){ - result = zft_fetch_segment(pos->seg_pos, - zft_deblock_buf, - FT_RD_SINGLE); - if (result < 0) { - if (result == -EINTR || result == -ENOSPC) { - TRACE_EXIT result; - } - TRACE(ft_t_noise, - "ftape_read_segment() result: %d. " - "This might be normal when using " - "a newly\nformatted tape", result); - memset(zft_deblock_buf, '\0', pos->seg_byte_pos); - } - } - zft_io_state = zft_writing; - TRACE_EXIT 0; -} - -static int fill_deblock_buf(__u8 *dst_buf, const int seg_sz, - zft_position *pos, const zft_volinfo *volume, - const char __user *usr_buf, const int req_len) -{ - int cnt = 0; - int result = 0; - TRACE_FUN(ft_t_flow); - - if (seg_sz == 0) { - TRACE_ABORT(0, ft_t_data_flow, "empty segment"); - } - TRACE(ft_t_data_flow, "\n" - KERN_INFO "remaining req_len: %d\n" - KERN_INFO " buf_pos: %d", - req_len, pos->seg_byte_pos); - /* zft_deblock_buf will not contain a valid segment any longer */ - zft_deblock_segment = -1; - if (zft_use_compression) { - TRACE_CATCH(zft_cmpr_lock(1 /* try to load */),); - TRACE_CATCH(result= (*zft_cmpr_ops->write)(&cnt, - dst_buf, seg_sz, - usr_buf, req_len, - pos, volume),); - } else { - TRACE_CATCH(result= zft_simple_write(&cnt, - dst_buf, seg_sz, - usr_buf, req_len, - pos, volume),); - } - pos->volume_pos += result; - pos->seg_byte_pos += cnt; - pos->tape_pos += cnt; - TRACE(ft_t_data_flow, "\n" - KERN_INFO "removed from user-buffer : %d bytes.\n" - KERN_INFO "copied to zft_deblock_buf: %d bytes.\n" - KERN_INFO "zft_tape_pos : " LL_X " bytes.", - result, cnt, LL(pos->tape_pos)); - TRACE_EXIT result; -} - - -/* called by the kernel-interface routine "zft_write()" - */ -int _zft_write(const char __user *buff, int req_len) -{ - int result = 0; - int written = 0; - int write_cnt; - int seg_sz; - static const zft_volinfo *volume = NULL; - TRACE_FUN(ft_t_flow); - - zft_resid = req_len; - last_write_failed = 1; /* reset to 0 when successful */ - /* check if write is allowed - */ - TRACE_CATCH(check_write_access(req_len, &volume,&zft_pos,zft_blk_sz),); - while (req_len > 0) { - /* Allow us to escape from this loop with a signal ! - */ - FT_SIGNAL_EXIT(_DONT_BLOCK); - seg_sz = zft_get_seg_sz(zft_pos.seg_pos); - if ((write_cnt = fill_deblock_buf(zft_deblock_buf, - seg_sz, - &zft_pos, - volume, - buff, - req_len)) < 0) { - zft_resid -= written; - if (write_cnt == -ENOSPC) { - /* leave the remainder to flush_buffers() - */ - TRACE(ft_t_info, "No space left on device"); - last_write_failed = 0; - if (!need_flush) { - need_flush = written > 0; - } - TRACE_EXIT written > 0 ? written : -ENOSPC; - } else { - TRACE_EXIT result; - } - } - if (zft_pos.seg_byte_pos == seg_sz) { - TRACE_CATCH(ftape_write_segment(zft_pos.seg_pos, - zft_deblock_buf, - FT_WR_ASYNC), - zft_resid -= written); - zft_written_segments ++; - zft_pos.seg_byte_pos = 0; - zft_deblock_segment = zft_pos.seg_pos; - ++zft_pos.seg_pos; - } - written += write_cnt; - buff += write_cnt; - req_len -= write_cnt; - } /* while (req_len > 0) */ - TRACE(ft_t_data_flow, "remaining in blocking buffer: %d", - zft_pos.seg_byte_pos); - TRACE(ft_t_data_flow, "just written bytes: %d", written); - last_write_failed = 0; - zft_resid -= written; - need_flush = need_flush || written > 0; - TRACE_EXIT written; /* bytes written */ -} diff --git a/drivers/char/ftape/zftape/zftape-write.h b/drivers/char/ftape/zftape/zftape-write.h deleted file mode 100644 index ea887015b49..00000000000 --- a/drivers/char/ftape/zftape/zftape-write.h +++ /dev/null @@ -1,38 +0,0 @@ -#ifndef _ZFTAPE_WRITE_H -#define _ZFTAPE_WRITE_H - -/* - * Copyright (C) 1996, 1997 Claus-Justus Heine - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; see the file COPYING. If not, write to - the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - - * - * $Source: /homes/cvs/ftape-stacked/ftape/zftape/zftape-write.h,v $ - * $Revision: 1.2 $ - * $Date: 1997/10/05 19:19:13 $ - * - * This file contains the definitions for the write functions - * for the zftape driver for Linux. - * - */ - -extern int zft_flush_buffers(void); -extern int zft_update_header_segments(void); -extern void zft_prevent_flush(void); - -/* hook for the VFS interface - */ -extern int _zft_write(const char __user *buff, int req_len); -#endif /* _ZFTAPE_WRITE_H */ diff --git a/drivers/char/ftape/zftape/zftape_syms.c b/drivers/char/ftape/zftape/zftape_syms.c deleted file mode 100644 index 2db1401682d..00000000000 --- a/drivers/char/ftape/zftape/zftape_syms.c +++ /dev/null @@ -1,43 +0,0 @@ -/* - * Copyright (C) 1997 Claus-Justus Heine - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; see the file COPYING. If not, write to - the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - - * - * $Source: /homes/cvs/ftape-stacked/ftape/zftape/zftape_syms.c,v $ - * $Revision: 1.3 $ - * $Date: 1997/10/05 19:19:14 $ - * - * This file contains the symbols that the zftape frontend to - * the ftape floppy tape driver exports - */ - -#include <linux/module.h> - -#include <linux/zftape.h> - -#include "../zftape/zftape-init.h" -#include "../zftape/zftape-read.h" -#include "../zftape/zftape-buffers.h" -#include "../zftape/zftape-ctl.h" - -/* zftape-init.c */ -EXPORT_SYMBOL(zft_cmpr_register); -/* zftape-read.c */ -EXPORT_SYMBOL(zft_fetch_segment_fraction); -/* zftape-buffers.c */ -EXPORT_SYMBOL(zft_vmalloc_once); -EXPORT_SYMBOL(zft_vmalloc_always); -EXPORT_SYMBOL(zft_vfree); diff --git a/drivers/char/hw_random/core.c b/drivers/char/hw_random/core.c index 154a81d328c..ebace201bec 100644 --- a/drivers/char/hw_random/core.c +++ b/drivers/char/hw_random/core.c @@ -162,7 +162,8 @@ static struct miscdevice rng_miscdev = { }; -static ssize_t hwrng_attr_current_store(struct class_device *class, +static ssize_t hwrng_attr_current_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t len) { int err; @@ -192,7 +193,8 @@ static ssize_t hwrng_attr_current_store(struct class_device *class, return err ? : len; } -static ssize_t hwrng_attr_current_show(struct class_device *class, +static ssize_t hwrng_attr_current_show(struct device *dev, + struct device_attribute *attr, char *buf) { int err; @@ -210,7 +212,8 @@ static ssize_t hwrng_attr_current_show(struct class_device *class, return ret; } -static ssize_t hwrng_attr_available_show(struct class_device *class, +static ssize_t hwrng_attr_available_show(struct device *dev, + struct device_attribute *attr, char *buf) { int err; @@ -234,20 +237,18 @@ static ssize_t hwrng_attr_available_show(struct class_device *class, return ret; } -static CLASS_DEVICE_ATTR(rng_current, S_IRUGO | S_IWUSR, - hwrng_attr_current_show, - hwrng_attr_current_store); -static CLASS_DEVICE_ATTR(rng_available, S_IRUGO, - hwrng_attr_available_show, - NULL); +static DEVICE_ATTR(rng_current, S_IRUGO | S_IWUSR, + hwrng_attr_current_show, + hwrng_attr_current_store); +static DEVICE_ATTR(rng_available, S_IRUGO, + hwrng_attr_available_show, + NULL); static void unregister_miscdev(void) { - class_device_remove_file(rng_miscdev.class, - &class_device_attr_rng_available); - class_device_remove_file(rng_miscdev.class, - &class_device_attr_rng_current); + device_remove_file(rng_miscdev.this_device, &dev_attr_rng_available); + device_remove_file(rng_miscdev.this_device, &dev_attr_rng_current); misc_deregister(&rng_miscdev); } @@ -258,20 +259,19 @@ static int register_miscdev(void) err = misc_register(&rng_miscdev); if (err) goto out; - err = class_device_create_file(rng_miscdev.class, - &class_device_attr_rng_current); + err = device_create_file(rng_miscdev.this_device, + &dev_attr_rng_current); if (err) goto err_misc_dereg; - err = class_device_create_file(rng_miscdev.class, - &class_device_attr_rng_available); + err = device_create_file(rng_miscdev.this_device, + &dev_attr_rng_available); if (err) goto err_remove_current; out: return err; err_remove_current: - class_device_remove_file(rng_miscdev.class, - &class_device_attr_rng_current); + device_remove_file(rng_miscdev.this_device, &dev_attr_rng_current); err_misc_dereg: misc_deregister(&rng_miscdev); goto out; diff --git a/drivers/char/mem.c b/drivers/char/mem.c index 55473371b7c..e67eef4867b 100644 --- a/drivers/char/mem.c +++ b/drivers/char/mem.c @@ -980,10 +980,10 @@ static int __init chr_dev_init(void) mem_class = class_create(THIS_MODULE, "mem"); for (i = 0; i < ARRAY_SIZE(devlist); i++) - class_device_create(mem_class, NULL, - MKDEV(MEM_MAJOR, devlist[i].minor), - NULL, devlist[i].name); - + device_create(mem_class, NULL, + MKDEV(MEM_MAJOR, devlist[i].minor), + devlist[i].name); + return 0; } diff --git a/drivers/char/misc.c b/drivers/char/misc.c index 62ebe09656e..7a484fc7cb9 100644 --- a/drivers/char/misc.c +++ b/drivers/char/misc.c @@ -169,11 +169,6 @@ fail: return err; } -/* - * TODO for 2.7: - * - add a struct kref to struct miscdevice and make all usages of - * them dynamic. - */ static struct class *misc_class; static const struct file_operations misc_fops = { @@ -228,10 +223,10 @@ int misc_register(struct miscdevice * misc) misc_minors[misc->minor >> 3] |= 1 << (misc->minor & 7); dev = MKDEV(MISC_MAJOR, misc->minor); - misc->class = class_device_create(misc_class, NULL, dev, misc->dev, + misc->this_device = device_create(misc_class, misc->parent, dev, "%s", misc->name); - if (IS_ERR(misc->class)) { - err = PTR_ERR(misc->class); + if (IS_ERR(misc->this_device)) { + err = PTR_ERR(misc->this_device); goto out; } @@ -264,7 +259,7 @@ int misc_deregister(struct miscdevice * misc) down(&misc_sem); list_del(&misc->list); - class_device_destroy(misc_class, MKDEV(MISC_MAJOR, misc->minor)); + device_destroy(misc_class, MKDEV(MISC_MAJOR, misc->minor)); if (i < DYNAMIC_MINORS && i>0) { misc_minors[i>>3] &= ~(1 << (misc->minor & 7)); } diff --git a/drivers/char/ppdev.c b/drivers/char/ppdev.c index efc485edad1..c1e3dd837fc 100644 --- a/drivers/char/ppdev.c +++ b/drivers/char/ppdev.c @@ -752,13 +752,13 @@ static const struct file_operations pp_fops = { static void pp_attach(struct parport *port) { - class_device_create(ppdev_class, NULL, MKDEV(PP_MAJOR, port->number), - NULL, "parport%d", port->number); + device_create(ppdev_class, NULL, MKDEV(PP_MAJOR, port->number), + "parport%d", port->number); } static void pp_detach(struct parport *port) { - class_device_destroy(ppdev_class, MKDEV(PP_MAJOR, port->number)); + device_destroy(ppdev_class, MKDEV(PP_MAJOR, port->number)); } static struct parport_driver pp_driver = { diff --git a/drivers/char/random.c b/drivers/char/random.c index fa764688cad..4c6782a1ecd 100644 --- a/drivers/char/random.c +++ b/drivers/char/random.c @@ -1466,8 +1466,8 @@ static __init int seqgen_init(void) late_initcall(seqgen_init); #if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) -__u32 secure_tcpv6_sequence_number(__u32 *saddr, __u32 *daddr, - __u16 sport, __u16 dport) +__u32 secure_tcpv6_sequence_number(__be32 *saddr, __be32 *daddr, + __be16 sport, __be16 dport) { struct timeval tv; __u32 seq; @@ -1479,10 +1479,10 @@ __u32 secure_tcpv6_sequence_number(__u32 *saddr, __u32 *daddr, */ memcpy(hash, saddr, 16); - hash[4]=(sport << 16) + dport; + hash[4]=((__force u16)sport << 16) + (__force u16)dport; memcpy(&hash[5],keyptr->secret,sizeof(__u32) * 7); - seq = twothirdsMD4Transform(daddr, hash) & HASH_MASK; + seq = twothirdsMD4Transform((const __u32 *)daddr, hash) & HASH_MASK; seq += keyptr->count; do_gettimeofday(&tv); @@ -1496,7 +1496,7 @@ EXPORT_SYMBOL(secure_tcpv6_sequence_number); /* The code below is shamelessly stolen from secure_tcp_sequence_number(). * All blames to Andrey V. Savochkin <saw@msu.ru>. */ -__u32 secure_ip_id(__u32 daddr) +__u32 secure_ip_id(__be32 daddr) { struct keydata *keyptr; __u32 hash[4]; @@ -1508,7 +1508,7 @@ __u32 secure_ip_id(__u32 daddr) * The dest ip address is placed in the starting vector, * which is then hashed with random data. */ - hash[0] = daddr; + hash[0] = (__force __u32)daddr; hash[1] = keyptr->secret[9]; hash[2] = keyptr->secret[10]; hash[3] = keyptr->secret[11]; @@ -1518,8 +1518,8 @@ __u32 secure_ip_id(__u32 daddr) #ifdef CONFIG_INET -__u32 secure_tcp_sequence_number(__u32 saddr, __u32 daddr, - __u16 sport, __u16 dport) +__u32 secure_tcp_sequence_number(__be32 saddr, __be32 daddr, + __be16 sport, __be16 dport) { struct timeval tv; __u32 seq; @@ -1532,9 +1532,9 @@ __u32 secure_tcp_sequence_number(__u32 saddr, __u32 daddr, * Note that the words are placed into the starting vector, which is * then mixed with a partial MD4 over random data. */ - hash[0]=saddr; - hash[1]=daddr; - hash[2]=(sport << 16) + dport; + hash[0]=(__force u32)saddr; + hash[1]=(__force u32)daddr; + hash[2]=((__force u16)sport << 16) + (__force u16)dport; hash[3]=keyptr->secret[11]; seq = half_md4_transform(hash, keyptr->secret) & HASH_MASK; @@ -1559,7 +1559,7 @@ __u32 secure_tcp_sequence_number(__u32 saddr, __u32 daddr, EXPORT_SYMBOL(secure_tcp_sequence_number); /* Generate secure starting point for ephemeral IPV4 transport port search */ -u32 secure_ipv4_port_ephemeral(__u32 saddr, __u32 daddr, __u16 dport) +u32 secure_ipv4_port_ephemeral(__be32 saddr, __be32 daddr, __be16 dport) { struct keydata *keyptr = get_keyptr(); u32 hash[4]; @@ -1568,25 +1568,25 @@ u32 secure_ipv4_port_ephemeral(__u32 saddr, __u32 daddr, __u16 dport) * Pick a unique starting offset for each ephemeral port search * (saddr, daddr, dport) and 48bits of random data. */ - hash[0] = saddr; - hash[1] = daddr; - hash[2] = dport ^ keyptr->secret[10]; + hash[0] = (__force u32)saddr; + hash[1] = (__force u32)daddr; + hash[2] = (__force u32)dport ^ keyptr->secret[10]; hash[3] = keyptr->secret[11]; return half_md4_transform(hash, keyptr->secret); } #if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) -u32 secure_ipv6_port_ephemeral(const __u32 *saddr, const __u32 *daddr, __u16 dport) +u32 secure_ipv6_port_ephemeral(const __be32 *saddr, const __be32 *daddr, __be16 dport) { struct keydata *keyptr = get_keyptr(); u32 hash[12]; memcpy(hash, saddr, 16); - hash[4] = dport; + hash[4] = (__force u32)dport; memcpy(&hash[5],keyptr->secret,sizeof(__u32) * 7); - return twothirdsMD4Transform(daddr, hash); + return twothirdsMD4Transform((const __u32 *)daddr, hash); } #endif @@ -1595,17 +1595,17 @@ u32 secure_ipv6_port_ephemeral(const __u32 *saddr, const __u32 *daddr, __u16 dpo * bit's 32-47 increase every key exchange * 0-31 hash(source, dest) */ -u64 secure_dccp_sequence_number(__u32 saddr, __u32 daddr, - __u16 sport, __u16 dport) +u64 secure_dccp_sequence_number(__be32 saddr, __be32 daddr, + __be16 sport, __be16 dport) { struct timeval tv; u64 seq; __u32 hash[4]; struct keydata *keyptr = get_keyptr(); - hash[0] = saddr; - hash[1] = daddr; - hash[2] = (sport << 16) + dport; + hash[0] = (__force u32)saddr; + hash[1] = (__force u32)daddr; + hash[2] = ((__force u16)sport << 16) + (__force u16)dport; hash[3] = keyptr->secret[11]; seq = half_md4_transform(hash, keyptr->secret); @@ -1641,7 +1641,7 @@ unsigned int get_random_int(void) * drain on it), and uses halfMD4Transform within the second. We * also mix it with jiffies and the PID: */ - return secure_ip_id(current->pid + jiffies); + return secure_ip_id((__force __be32)(current->pid + jiffies)); } /* diff --git a/drivers/char/raw.c b/drivers/char/raw.c index 89b718e326e..3b32313f6eb 100644 --- a/drivers/char/raw.c +++ b/drivers/char/raw.c @@ -127,9 +127,9 @@ raw_ioctl(struct inode *inode, struct file *filp, static void bind_device(struct raw_config_request *rq) { - class_device_destroy(raw_class, MKDEV(RAW_MAJOR, rq->raw_minor)); - class_device_create(raw_class, NULL, MKDEV(RAW_MAJOR, rq->raw_minor), - NULL, "raw%d", rq->raw_minor); + device_destroy(raw_class, MKDEV(RAW_MAJOR, rq->raw_minor)); + device_create(raw_class, NULL, MKDEV(RAW_MAJOR, rq->raw_minor), + "raw%d", rq->raw_minor); } /* @@ -200,7 +200,7 @@ static int raw_ctl_ioctl(struct inode *inode, struct file *filp, if (rq.block_major == 0 && rq.block_minor == 0) { /* unbind */ rawdev->binding = NULL; - class_device_destroy(raw_class, + device_destroy(raw_class, MKDEV(RAW_MAJOR, rq.raw_minor)); } else { rawdev->binding = bdget(dev); @@ -283,7 +283,7 @@ static int __init raw_init(void) ret = PTR_ERR(raw_class); goto error_region; } - class_device_create(raw_class, NULL, MKDEV(RAW_MAJOR, 0), NULL, "rawctl"); + device_create(raw_class, NULL, MKDEV(RAW_MAJOR, 0), "rawctl"); return 0; @@ -295,7 +295,7 @@ error: static void __exit raw_exit(void) { - class_device_destroy(raw_class, MKDEV(RAW_MAJOR, 0)); + device_destroy(raw_class, MKDEV(RAW_MAJOR, 0)); class_destroy(raw_class); cdev_del(&raw_cdev); unregister_chrdev_region(MKDEV(RAW_MAJOR, 0), MAX_RAW_MINORS); diff --git a/drivers/char/rio/riocmd.c b/drivers/char/rio/riocmd.c index 4df6ab2206a..167ebc84e8d 100644 --- a/drivers/char/rio/riocmd.c +++ b/drivers/char/rio/riocmd.c @@ -922,7 +922,7 @@ int RIOUnUse(unsigned long iPortP, struct CmdBlk *CmdBlkP) ** ** Packet is an actual packet structure to be filled in with the packet ** information associated with the command. You need to fill in everything, -** as the command processore doesn't process the command packet in any way. +** as the command processor doesn't process the command packet in any way. ** ** The PreFuncP is called before the packet is enqueued on the host rup. ** PreFuncP is called as (*PreFuncP)(PreArg, CmdBlkP);. PreFuncP must diff --git a/drivers/char/rio/rioinit.c b/drivers/char/rio/rioinit.c index 99f3df02b61..0794844369d 100644 --- a/drivers/char/rio/rioinit.c +++ b/drivers/char/rio/rioinit.c @@ -222,7 +222,7 @@ int RIOBoardTest(unsigned long paddr, void __iomem *caddr, unsigned char type, i ** which value will be written into memory. ** Call with op set to zero means that the RAM will not be read and checked ** before it is written. -** Call with op not zero, and the RAM will be read and compated with val[op-1] +** Call with op not zero and the RAM will be read and compared with val[op-1] ** to check that the data from the previous phase was retained. */ diff --git a/drivers/char/rio/rioparam.c b/drivers/char/rio/rioparam.c index 1066d976070..bb498d24adc 100644 --- a/drivers/char/rio/rioparam.c +++ b/drivers/char/rio/rioparam.c @@ -87,8 +87,8 @@ static char *_rioparam_c_sccs_ = "@(#)rioparam.c 1.3"; ** command bit set onto the port. The command bit is in the len field, ** and gets ORed in with the actual byte count. ** -** When you send a packet with the command bit set, then the first -** data byte ( data[0] ) is interpretted as the command to execute. +** When you send a packet with the command bit set the first +** data byte (data[0]) is interpreted as the command to execute. ** It also governs what data structure overlay should accompany the packet. ** Commands are defined in cirrus/cirrus.h ** @@ -103,7 +103,7 @@ static char *_rioparam_c_sccs_ = "@(#)rioparam.c 1.3"; ** ** Most commands do not use the remaining bytes in the data array. The ** exceptions are OPEN MOPEN and CONFIG. (NB. As with the SI CONFIG and -** OPEN are currently analagous). With these three commands the following +** OPEN are currently analogous). With these three commands the following ** 11 data bytes are all used to pass config information such as baud rate etc. ** The fields are also defined in cirrus.h. Some contain straightforward ** information such as the transmit XON character. Two contain the transmit and diff --git a/drivers/char/tlclk.c b/drivers/char/tlclk.c index 2444a0e24b3..244d30a03fe 100644 --- a/drivers/char/tlclk.c +++ b/drivers/char/tlclk.c @@ -792,15 +792,14 @@ static int __init tlclk_init(void) ret = misc_register(&tlclk_miscdev); if (ret < 0) { printk(KERN_ERR "tlclk: misc_register returns %d.\n", ret); - ret = -EBUSY; goto out3; } tlclk_device = platform_device_register_simple("telco_clock", -1, NULL, 0); - if (!tlclk_device) { + if (IS_ERR(tlclk_device)) { printk(KERN_ERR "tlclk: platform_device_register failed.\n"); - ret = -EBUSY; + ret = PTR_ERR(tlclk_device); goto out4; } diff --git a/drivers/char/tpm/tpm.c b/drivers/char/tpm/tpm.c index 36f91a65527..774fa861169 100644 --- a/drivers/char/tpm/tpm.c +++ b/drivers/char/tpm/tpm.c @@ -1130,7 +1130,7 @@ struct tpm_chip *tpm_register_hardware(struct device *dev, const struct tpm_vend scnprintf(devname, DEVNAME_SIZE, "%s%d", "tpm", chip->dev_num); chip->vendor.miscdev.name = devname; - chip->vendor.miscdev.dev = dev; + chip->vendor.miscdev.parent = dev; chip->dev = get_device(dev); if (misc_register(&chip->vendor.miscdev)) { diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c index 83e9e7d9b58..b3cfc8bc613 100644 --- a/drivers/char/tty_io.c +++ b/drivers/char/tty_io.c @@ -3615,7 +3615,8 @@ static struct class *tty_class; * This field is optional, if there is no known struct device * for this tty device it can be set to NULL safely. * - * Returns a pointer to the class device (or ERR_PTR(-EFOO) on error). + * Returns a pointer to the struct device for this tty device + * (or ERR_PTR(-EFOO) on error). * * This call is required to be made to register an individual tty device * if the tty driver's flags have the TTY_DRIVER_DYNAMIC_DEV bit set. If @@ -3625,8 +3626,8 @@ static struct class *tty_class; * Locking: ?? */ -struct class_device *tty_register_device(struct tty_driver *driver, - unsigned index, struct device *device) +struct device *tty_register_device(struct tty_driver *driver, unsigned index, + struct device *device) { char name[64]; dev_t dev = MKDEV(driver->major, driver->minor_start) + index; @@ -3642,7 +3643,7 @@ struct class_device *tty_register_device(struct tty_driver *driver, else tty_line_name(driver, index, name); - return class_device_create(tty_class, NULL, dev, device, "%s", name); + return device_create(tty_class, device, dev, name); } /** @@ -3658,7 +3659,7 @@ struct class_device *tty_register_device(struct tty_driver *driver, void tty_unregister_device(struct tty_driver *driver, unsigned index) { - class_device_destroy(tty_class, MKDEV(driver->major, driver->minor_start) + index); + device_destroy(tty_class, MKDEV(driver->major, driver->minor_start) + index); } EXPORT_SYMBOL(tty_register_device); @@ -3898,20 +3899,20 @@ static int __init tty_init(void) if (cdev_add(&tty_cdev, MKDEV(TTYAUX_MAJOR, 0), 1) || register_chrdev_region(MKDEV(TTYAUX_MAJOR, 0), 1, "/dev/tty") < 0) panic("Couldn't register /dev/tty driver\n"); - class_device_create(tty_class, NULL, MKDEV(TTYAUX_MAJOR, 0), NULL, "tty"); + device_create(tty_class, NULL, MKDEV(TTYAUX_MAJOR, 0), "tty"); cdev_init(&console_cdev, &console_fops); if (cdev_add(&console_cdev, MKDEV(TTYAUX_MAJOR, 1), 1) || register_chrdev_region(MKDEV(TTYAUX_MAJOR, 1), 1, "/dev/console") < 0) panic("Couldn't register /dev/console driver\n"); - class_device_create(tty_class, NULL, MKDEV(TTYAUX_MAJOR, 1), NULL, "console"); + device_create(tty_class, NULL, MKDEV(TTYAUX_MAJOR, 1), "console"); #ifdef CONFIG_UNIX98_PTYS cdev_init(&ptmx_cdev, &ptmx_fops); if (cdev_add(&ptmx_cdev, MKDEV(TTYAUX_MAJOR, 2), 1) || register_chrdev_region(MKDEV(TTYAUX_MAJOR, 2), 1, "/dev/ptmx") < 0) panic("Couldn't register /dev/ptmx driver\n"); - class_device_create(tty_class, NULL, MKDEV(TTYAUX_MAJOR, 2), NULL, "ptmx"); + device_create(tty_class, NULL, MKDEV(TTYAUX_MAJOR, 2), "ptmx"); #endif #ifdef CONFIG_VT @@ -3919,7 +3920,7 @@ static int __init tty_init(void) if (cdev_add(&vc0_cdev, MKDEV(TTY_MAJOR, 0), 1) || register_chrdev_region(MKDEV(TTY_MAJOR, 0), 1, "/dev/vc/0") < 0) panic("Couldn't register /dev/tty0 driver\n"); - class_device_create(tty_class, NULL, MKDEV(TTY_MAJOR, 0), NULL, "tty0"); + device_create(tty_class, NULL, MKDEV(TTY_MAJOR, 0), "tty0"); vty_init(); #endif diff --git a/drivers/char/vc_screen.c b/drivers/char/vc_screen.c index bd7a98c6ea7..f442b574b44 100644 --- a/drivers/char/vc_screen.c +++ b/drivers/char/vc_screen.c @@ -476,16 +476,16 @@ static struct class *vc_class; void vcs_make_sysfs(struct tty_struct *tty) { - class_device_create(vc_class, NULL, MKDEV(VCS_MAJOR, tty->index + 1), - NULL, "vcs%u", tty->index + 1); - class_device_create(vc_class, NULL, MKDEV(VCS_MAJOR, tty->index + 129), - NULL, "vcsa%u", tty->index + 1); + device_create(vc_class, NULL, MKDEV(VCS_MAJOR, tty->index + 1), + "vcs%u", tty->index + 1); + device_create(vc_class, NULL, MKDEV(VCS_MAJOR, tty->index + 129), + "vcsa%u", tty->index + 1); } void vcs_remove_sysfs(struct tty_struct *tty) { - class_device_destroy(vc_class, MKDEV(VCS_MAJOR, tty->index + 1)); - class_device_destroy(vc_class, MKDEV(VCS_MAJOR, tty->index + 129)); + device_destroy(vc_class, MKDEV(VCS_MAJOR, tty->index + 1)); + device_destroy(vc_class, MKDEV(VCS_MAJOR, tty->index + 129)); } int __init vcs_init(void) @@ -494,7 +494,7 @@ int __init vcs_init(void) panic("unable to get major %d for vcs device", VCS_MAJOR); vc_class = class_create(THIS_MODULE, "vc"); - class_device_create(vc_class, NULL, MKDEV(VCS_MAJOR, 0), NULL, "vcs"); - class_device_create(vc_class, NULL, MKDEV(VCS_MAJOR, 128), NULL, "vcsa"); + device_create(vc_class, NULL, MKDEV(VCS_MAJOR, 0), "vcs"); + device_create(vc_class, NULL, MKDEV(VCS_MAJOR, 128), "vcsa"); return 0; } diff --git a/drivers/char/vt.c b/drivers/char/vt.c index 8ee04adc37f..75ff0286e1a 100644 --- a/drivers/char/vt.c +++ b/drivers/char/vt.c @@ -112,7 +112,7 @@ struct con_driver { const struct consw *con; const char *desc; - struct class_device *class_dev; + struct device *dev; int node; int first; int last; @@ -3023,10 +3023,10 @@ static inline int vt_unbind(struct con_driver *con) } #endif /* CONFIG_VT_HW_CONSOLE_BINDING */ -static ssize_t store_bind(struct class_device *class_device, +static ssize_t store_bind(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { - struct con_driver *con = class_get_devdata(class_device); + struct con_driver *con = dev_get_drvdata(dev); int bind = simple_strtoul(buf, NULL, 0); if (bind) @@ -3037,17 +3037,19 @@ static ssize_t store_bind(struct class_device *class_device, return count; } -static ssize_t show_bind(struct class_device *class_device, char *buf) +static ssize_t show_bind(struct device *dev, struct device_attribute *attr, + char *buf) { - struct con_driver *con = class_get_devdata(class_device); + struct con_driver *con = dev_get_drvdata(dev); int bind = con_is_bound(con->con); return snprintf(buf, PAGE_SIZE, "%i\n", bind); } -static ssize_t show_name(struct class_device *class_device, char *buf) +static ssize_t show_name(struct device *dev, struct device_attribute *attr, + char *buf) { - struct con_driver *con = class_get_devdata(class_device); + struct con_driver *con = dev_get_drvdata(dev); return snprintf(buf, PAGE_SIZE, "%s %s\n", (con->flag & CON_DRIVER_FLAG_MODULE) ? "(M)" : "(S)", @@ -3055,43 +3057,40 @@ static ssize_t show_name(struct class_device *class_device, char *buf) } -static struct class_device_attribute class_device_attrs[] = { +static struct device_attribute device_attrs[] = { __ATTR(bind, S_IRUGO|S_IWUSR, show_bind, store_bind), __ATTR(name, S_IRUGO, show_name, NULL), }; -static int vtconsole_init_class_device(struct con_driver *con) +static int vtconsole_init_device(struct con_driver *con) { int i; int error = 0; con->flag |= CON_DRIVER_FLAG_ATTR; - class_set_devdata(con->class_dev, con); - for (i = 0; i < ARRAY_SIZE(class_device_attrs); i++) { - error = class_device_create_file(con->class_dev, - &class_device_attrs[i]); + dev_set_drvdata(con->dev, con); + for (i = 0; i < ARRAY_SIZE(device_attrs); i++) { + error = device_create_file(con->dev, &device_attrs[i]); if (error) break; } if (error) { while (--i >= 0) - class_device_remove_file(con->class_dev, - &class_device_attrs[i]); + device_remove_file(con->dev, &device_attrs[i]); con->flag &= ~CON_DRIVER_FLAG_ATTR; } return error; } -static void vtconsole_deinit_class_device(struct con_driver *con) +static void vtconsole_deinit_device(struct con_driver *con) { int i; if (con->flag & CON_DRIVER_FLAG_ATTR) { - for (i = 0; i < ARRAY_SIZE(class_device_attrs); i++) - class_device_remove_file(con->class_dev, - &class_device_attrs[i]); + for (i = 0; i < ARRAY_SIZE(device_attrs); i++) + device_remove_file(con->dev, &device_attrs[i]); con->flag &= ~CON_DRIVER_FLAG_ATTR; } } @@ -3179,18 +3178,17 @@ int register_con_driver(const struct consw *csw, int first, int last) if (retval) goto err; - con_driver->class_dev = class_device_create(vtconsole_class, NULL, - MKDEV(0, con_driver->node), - NULL, "vtcon%i", - con_driver->node); + con_driver->dev = device_create(vtconsole_class, NULL, + MKDEV(0, con_driver->node), + "vtcon%i", con_driver->node); - if (IS_ERR(con_driver->class_dev)) { - printk(KERN_WARNING "Unable to create class_device for %s; " + if (IS_ERR(con_driver->dev)) { + printk(KERN_WARNING "Unable to create device for %s; " "errno = %ld\n", con_driver->desc, - PTR_ERR(con_driver->class_dev)); - con_driver->class_dev = NULL; + PTR_ERR(con_driver->dev)); + con_driver->dev = NULL; } else { - vtconsole_init_class_device(con_driver); + vtconsole_init_device(con_driver); } err: @@ -3226,12 +3224,12 @@ int unregister_con_driver(const struct consw *csw) if (con_driver->con == csw && con_driver->flag & CON_DRIVER_FLAG_MODULE) { - vtconsole_deinit_class_device(con_driver); - class_device_destroy(vtconsole_class, - MKDEV(0, con_driver->node)); + vtconsole_deinit_device(con_driver); + device_destroy(vtconsole_class, + MKDEV(0, con_driver->node)); con_driver->con = NULL; con_driver->desc = NULL; - con_driver->class_dev = NULL; + con_driver->dev = NULL; con_driver->node = 0; con_driver->flag = 0; con_driver->first = 0; @@ -3289,19 +3287,18 @@ static int __init vtconsole_class_init(void) for (i = 0; i < MAX_NR_CON_DRIVER; i++) { struct con_driver *con = ®istered_con_driver[i]; - if (con->con && !con->class_dev) { - con->class_dev = - class_device_create(vtconsole_class, NULL, - MKDEV(0, con->node), NULL, - "vtcon%i", con->node); + if (con->con && !con->dev) { + con->dev = device_create(vtconsole_class, NULL, + MKDEV(0, con->node), + "vtcon%i", con->node); - if (IS_ERR(con->class_dev)) { + if (IS_ERR(con->dev)) { printk(KERN_WARNING "Unable to create " - "class_device for %s; errno = %ld\n", - con->desc, PTR_ERR(con->class_dev)); - con->class_dev = NULL; + "device for %s; errno = %ld\n", + con->desc, PTR_ERR(con->dev)); + con->dev = NULL; } else { - vtconsole_init_class_device(con); + vtconsole_init_device(con); } } } diff --git a/drivers/char/watchdog/Kconfig b/drivers/char/watchdog/Kconfig index 0187b118532..ea09d0c974e 100644 --- a/drivers/char/watchdog/Kconfig +++ b/drivers/char/watchdog/Kconfig @@ -340,6 +340,14 @@ config ITCO_WDT To compile this driver as a module, choose M here: the module will be called iTCO_wdt. +config ITCO_VENDOR_SUPPORT + bool "Intel TCO Timer/Watchdog Specific Vendor Support" + depends on ITCO_WDT + ---help--- + Add vendor specific support to the intel TCO timer based watchdog + devices. At this moment we only have additional support for some + SuperMicro Inc. motherboards. + config SC1200_WDT tristate "National Semiconductor PC87307/PC97307 (ala SC1200) Watchdog" depends on WATCHDOG && X86 @@ -363,6 +371,20 @@ config SCx200_WDT If compiled as a module, it will be called scx200_wdt. +config PC87413_WDT + tristate "NS PC87413 watchdog" + depends on WATCHDOG && X86 + ---help--- + This is the driver for the hardware watchdog on the PC87413 chipset + This watchdog simply watches your kernel to make sure it doesn't + freeze, and if it does, it reboots your computer after a certain + amount of time. + + To compile this driver as a module, choose M here: the + module will be called pc87413_wdt. + + Most people will say N. + config 60XX_WDT tristate "SBC-60XX Watchdog Timer" depends on WATCHDOG && X86 @@ -553,6 +575,16 @@ config INDYDOG timer expired and no process has written to /dev/watchdog during that time. +config WDT_RM9K_GPI + tristate "RM9000/GPI hardware watchdog" + depends on WATCHDOG && CPU_RM9000 + help + Watchdog implementation using the GPI hardware found on + PMC-Sierra RM9xxx CPUs. + + To compile this driver as a module, choose M here: the + module will be called rm9k_wdt. + # S390 Architecture config ZVM_WATCHDOG diff --git a/drivers/char/watchdog/Makefile b/drivers/char/watchdog/Makefile index 36440497047..2cd8ff8d10a 100644 --- a/drivers/char/watchdog/Makefile +++ b/drivers/char/watchdog/Makefile @@ -47,9 +47,10 @@ obj-$(CONFIG_IBMASR) += ibmasr.o obj-$(CONFIG_WAFER_WDT) += wafer5823wdt.o obj-$(CONFIG_I6300ESB_WDT) += i6300esb.o obj-$(CONFIG_I8XX_TCO) += i8xx_tco.o -obj-$(CONFIG_ITCO_WDT) += iTCO_wdt.o +obj-$(CONFIG_ITCO_WDT) += iTCO_wdt.o iTCO_vendor_support.o obj-$(CONFIG_SC1200_WDT) += sc1200wdt.o obj-$(CONFIG_SCx200_WDT) += scx200_wdt.o +obj-$(CONFIG_PC87413_WDT) += pc87413_wdt.o obj-$(CONFIG_60XX_WDT) += sbc60xxwdt.o obj-$(CONFIG_SBC8360_WDT) += sbc8360.o obj-$(CONFIG_CPU5_WDT) += cpu5wdt.o @@ -72,6 +73,7 @@ obj-$(CONFIG_WATCHDOG_RTAS) += wdrtas.o # MIPS Architecture obj-$(CONFIG_INDYDOG) += indydog.o +obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o # S390 Architecture diff --git a/drivers/char/watchdog/iTCO_vendor_support.c b/drivers/char/watchdog/iTCO_vendor_support.c new file mode 100644 index 00000000000..41508399009 --- /dev/null +++ b/drivers/char/watchdog/iTCO_vendor_support.c @@ -0,0 +1,307 @@ +/* + * intel TCO vendor specific watchdog driver support + * + * (c) Copyright 2006 Wim Van Sebroeck <wim@iguana.be>. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Neither Wim Van Sebroeck nor Iguana vzw. admit liability nor + * provide warranty for any of this software. This material is + * provided "AS-IS" and at no charge. + */ + +/* + * Includes, defines, variables, module parameters, ... + */ + +/* Module and version information */ +#define DRV_NAME "iTCO_vendor_support" +#define DRV_VERSION "1.01" +#define DRV_RELDATE "11-Nov-2006" +#define PFX DRV_NAME ": " + +/* Includes */ +#include <linux/module.h> /* For module specific items */ +#include <linux/moduleparam.h> /* For new moduleparam's */ +#include <linux/types.h> /* For standard types (like size_t) */ +#include <linux/errno.h> /* For the -ENODEV/... values */ +#include <linux/kernel.h> /* For printk/panic/... */ +#include <linux/init.h> /* For __init/__exit/... */ +#include <linux/ioport.h> /* For io-port access */ + +#include <asm/io.h> /* For inb/outb/... */ + +/* iTCO defines */ +#define SMI_EN acpibase + 0x30 /* SMI Control and Enable Register */ +#define TCOBASE acpibase + 0x60 /* TCO base address */ +#define TCO1_STS TCOBASE + 0x04 /* TCO1 Status Register */ + +/* List of vendor support modes */ +#define SUPERMICRO_OLD_BOARD 1 /* SuperMicro Pentium 3 Era 370SSE+-OEM1/P3TSSE */ +#define SUPERMICRO_NEW_BOARD 2 /* SuperMicro Pentium 4 / Xeon 4 / EMT64T Era Systems */ + +static int vendorsupport = 0; +module_param(vendorsupport, int, 0); +MODULE_PARM_DESC(vendorsupport, "iTCO vendor specific support mode, default=0 (none), 1=SuperMicro Pent3, 2=SuperMicro Pent4+"); + +/* + * Vendor Specific Support + */ + +/* + * Vendor Support: 1 + * Board: Super Micro Computer Inc. 370SSE+-OEM1/P3TSSE + * iTCO chipset: ICH2 + * + * Code contributed by: R. Seretny <lkpatches@paypc.com> + * Documentation obtained by R. Seretny from SuperMicro Technical Support + * + * To enable Watchdog function: + * BIOS setup -> Power -> TCO Logic SMI Enable -> Within5Minutes + * This setting enables SMI to clear the watchdog expired flag. + * If BIOS or CPU fail which may cause SMI hang, then system will + * reboot. When application starts to use watchdog function, + * application has to take over the control from SMI. + * + * For P3TSSE, J36 jumper needs to be removed to enable the Watchdog + * function. + * + * Note: The system will reboot when Expire Flag is set TWICE. + * So, if the watchdog timer is 20 seconds, then the maximum hang + * time is about 40 seconds, and the minimum hang time is about + * 20.6 seconds. + */ + +static void supermicro_old_pre_start(unsigned long acpibase) +{ + unsigned long val32; + + val32 = inl(SMI_EN); + val32 &= 0xffffdfff; /* Turn off SMI clearing watchdog */ + outl(val32, SMI_EN); /* Needed to activate watchdog */ +} + +static void supermicro_old_pre_stop(unsigned long acpibase) +{ + unsigned long val32; + + val32 = inl(SMI_EN); + val32 &= 0x00002000; /* Turn on SMI clearing watchdog */ + outl(val32, SMI_EN); /* Needed to deactivate watchdog */ +} + +static void supermicro_old_pre_keepalive(unsigned long acpibase) +{ + /* Reload TCO Timer (done in iTCO_wdt_keepalive) + */ + /* Clear "Expire Flag" (Bit 3 of TC01_STS register) */ + outb(0x08, TCO1_STS); +} + +/* + * Vendor Support: 2 + * Board: Super Micro Computer Inc. P4SBx, P4DPx + * iTCO chipset: ICH4 + * + * Code contributed by: R. Seretny <lkpatches@paypc.com> + * Documentation obtained by R. Seretny from SuperMicro Technical Support + * + * To enable Watchdog function: + * 1. BIOS + * For P4SBx: + * BIOS setup -> Advanced -> Integrated Peripherals -> Watch Dog Feature + * For P4DPx: + * BIOS setup -> Advanced -> I/O Device Configuration -> Watch Dog + * This setting enables or disables Watchdog function. When enabled, the + * default watchdog timer is set to be 5 minutes (about 4’35â€). It is + * enough to load and run the OS. The application (service or driver) has + * to take over the control once OS is running up and before watchdog + * expires. + * + * 2. JUMPER + * For P4SBx: JP39 + * For P4DPx: JP37 + * This jumper is used for safety. Closed is enabled. This jumper + * prevents user enables watchdog in BIOS by accident. + * + * To enable Watch Dog function, both BIOS and JUMPER must be enabled. + * + * The documentation lists motherboards P4SBx and P4DPx series as of + * 20-March-2002. However, this code works flawlessly with much newer + * motherboards, such as my X6DHR-8G2 (SuperServer 6014H-82). + * + * The original iTCO driver as written does not actually reset the + * watchdog timer on these machines, as a result they reboot after five + * minutes. + * + * NOTE: You may leave the Watchdog function disabled in the SuperMicro + * BIOS to avoid a "boot-race"... This driver will enable watchdog + * functionality even if it's disabled in the BIOS once the /dev/watchdog + * file is opened. + */ + +/* I/O Port's */ +#define SM_REGINDEX 0x2e /* SuperMicro ICH4+ Register Index */ +#define SM_DATAIO 0x2f /* SuperMicro ICH4+ Register Data I/O */ + +/* Control Register's */ +#define SM_CTLPAGESW 0x07 /* SuperMicro ICH4+ Control Page Switch */ +#define SM_CTLPAGE 0x08 /* SuperMicro ICH4+ Control Page Num */ + +#define SM_WATCHENABLE 0x30 /* Watchdog enable: Bit 0: 0=off, 1=on */ + +#define SM_WATCHPAGE 0x87 /* Watchdog unlock control page */ + +#define SM_ENDWATCH 0xAA /* Watchdog lock control page */ + +#define SM_COUNTMODE 0xf5 /* Watchdog count mode select */ + /* (Bit 3: 0 = seconds, 1 = minutes */ + +#define SM_WATCHTIMER 0xf6 /* 8-bits, Watchdog timer counter (RW) */ + +#define SM_RESETCONTROL 0xf7 /* Watchdog reset control */ + /* Bit 6: timer is reset by kbd interrupt */ + /* Bit 7: timer is reset by mouse interrupt */ + +static void supermicro_new_unlock_watchdog(void) +{ + outb(SM_WATCHPAGE, SM_REGINDEX); /* Write 0x87 to port 0x2e twice */ + outb(SM_WATCHPAGE, SM_REGINDEX); + + outb(SM_CTLPAGESW, SM_REGINDEX); /* Switch to watchdog control page */ + outb(SM_CTLPAGE, SM_DATAIO); +} + +static void supermicro_new_lock_watchdog(void) +{ + outb(SM_ENDWATCH, SM_REGINDEX); +} + +static void supermicro_new_pre_start(unsigned int heartbeat) +{ + unsigned int val; + + supermicro_new_unlock_watchdog(); + + /* Watchdog timer setting needs to be in seconds*/ + outb(SM_COUNTMODE, SM_REGINDEX); + val = inb(SM_DATAIO); + val &= 0xF7; + outb(val, SM_DATAIO); + + /* Write heartbeat interval to WDOG */ + outb (SM_WATCHTIMER, SM_REGINDEX); + outb((heartbeat & 255), SM_DATAIO); + + /* Make sure keyboard/mouse interrupts don't interfere */ + outb(SM_RESETCONTROL, SM_REGINDEX); + val = inb(SM_DATAIO); + val &= 0x3f; + outb(val, SM_DATAIO); + + /* enable watchdog by setting bit 0 of Watchdog Enable to 1 */ + outb(SM_WATCHENABLE, SM_REGINDEX); + val = inb(SM_DATAIO); + val |= 0x01; + outb(val, SM_DATAIO); + + supermicro_new_lock_watchdog(); +} + +static void supermicro_new_pre_stop(void) +{ + unsigned int val; + + supermicro_new_unlock_watchdog(); + + /* disable watchdog by setting bit 0 of Watchdog Enable to 0 */ + outb(SM_WATCHENABLE, SM_REGINDEX); + val = inb(SM_DATAIO); + val &= 0xFE; + outb(val, SM_DATAIO); + + supermicro_new_lock_watchdog(); +} + +static void supermicro_new_pre_set_heartbeat(unsigned int heartbeat) +{ + supermicro_new_unlock_watchdog(); + + /* reset watchdog timeout to heartveat value */ + outb(SM_WATCHTIMER, SM_REGINDEX); + outb((heartbeat & 255), SM_DATAIO); + + supermicro_new_lock_watchdog(); +} + +/* + * Generic Support Functions + */ + +void iTCO_vendor_pre_start(unsigned long acpibase, + unsigned int heartbeat) +{ + if (vendorsupport == SUPERMICRO_OLD_BOARD) + supermicro_old_pre_start(acpibase); + else if (vendorsupport == SUPERMICRO_NEW_BOARD) + supermicro_new_pre_start(heartbeat); +} +EXPORT_SYMBOL(iTCO_vendor_pre_start); + +void iTCO_vendor_pre_stop(unsigned long acpibase) +{ + if (vendorsupport == SUPERMICRO_OLD_BOARD) + supermicro_old_pre_stop(acpibase); + else if (vendorsupport == SUPERMICRO_NEW_BOARD) + supermicro_new_pre_stop(); +} +EXPORT_SYMBOL(iTCO_vendor_pre_stop); + +void iTCO_vendor_pre_keepalive(unsigned long acpibase, unsigned int heartbeat) +{ + if (vendorsupport == SUPERMICRO_OLD_BOARD) + supermicro_old_pre_keepalive(acpibase); + else if (vendorsupport == SUPERMICRO_NEW_BOARD) + supermicro_new_pre_set_heartbeat(heartbeat); +} +EXPORT_SYMBOL(iTCO_vendor_pre_keepalive); + +void iTCO_vendor_pre_set_heartbeat(unsigned int heartbeat) +{ + if (vendorsupport == SUPERMICRO_NEW_BOARD) + supermicro_new_pre_set_heartbeat(heartbeat); +} +EXPORT_SYMBOL(iTCO_vendor_pre_set_heartbeat); + +int iTCO_vendor_check_noreboot_on(void) +{ + switch(vendorsupport) { + case SUPERMICRO_OLD_BOARD: + return 0; + default: + return 1; + } +} +EXPORT_SYMBOL(iTCO_vendor_check_noreboot_on); + +static int __init iTCO_vendor_init_module(void) +{ + printk (KERN_INFO PFX "vendor-support=%d\n", vendorsupport); + return 0; +} + +static void __exit iTCO_vendor_exit_module(void) +{ + printk (KERN_INFO PFX "Module Unloaded\n"); +} + +module_init(iTCO_vendor_init_module); +module_exit(iTCO_vendor_exit_module); + +MODULE_AUTHOR("Wim Van Sebroeck <wim@iguana.be>, R. Seretny <lkpatches@paypc.com>"); +MODULE_DESCRIPTION("Intel TCO Vendor Specific WatchDog Timer Driver Support"); +MODULE_VERSION(DRV_VERSION); +MODULE_LICENSE("GPL"); + diff --git a/drivers/char/watchdog/iTCO_wdt.c b/drivers/char/watchdog/iTCO_wdt.c index b6f29cb8bd3..7eac922df86 100644 --- a/drivers/char/watchdog/iTCO_wdt.c +++ b/drivers/char/watchdog/iTCO_wdt.c @@ -48,8 +48,8 @@ /* Module and version information */ #define DRV_NAME "iTCO_wdt" -#define DRV_VERSION "1.00" -#define DRV_RELDATE "08-Oct-2006" +#define DRV_VERSION "1.01" +#define DRV_RELDATE "11-Nov-2006" #define PFX DRV_NAME ": " /* Includes */ @@ -189,6 +189,21 @@ static int nowayout = WATCHDOG_NOWAYOUT; module_param(nowayout, int, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=CONFIG_WATCHDOG_NOWAYOUT)"); +/* iTCO Vendor Specific Support hooks */ +#ifdef CONFIG_ITCO_VENDOR_SUPPORT +extern void iTCO_vendor_pre_start(unsigned long, unsigned int); +extern void iTCO_vendor_pre_stop(unsigned long); +extern void iTCO_vendor_pre_keepalive(unsigned long, unsigned int); +extern void iTCO_vendor_pre_set_heartbeat(unsigned int); +extern int iTCO_vendor_check_noreboot_on(void); +#else +#define iTCO_vendor_pre_start(acpibase, heartbeat) {} +#define iTCO_vendor_pre_stop(acpibase) {} +#define iTCO_vendor_pre_keepalive(acpibase,heartbeat) {} +#define iTCO_vendor_pre_set_heartbeat(heartbeat) {} +#define iTCO_vendor_check_noreboot_on() 1 /* 1=check noreboot; 0=don't check */ +#endif + /* * Some TCO specific functions */ @@ -249,6 +264,8 @@ static int iTCO_wdt_start(void) spin_lock(&iTCO_wdt_private.io_lock); + iTCO_vendor_pre_start(iTCO_wdt_private.ACPIBASE, heartbeat); + /* disable chipset's NO_REBOOT bit */ if (iTCO_wdt_unset_NO_REBOOT_bit()) { printk(KERN_ERR PFX "failed to reset NO_REBOOT flag, reboot disabled by hardware\n"); @@ -273,6 +290,8 @@ static int iTCO_wdt_stop(void) spin_lock(&iTCO_wdt_private.io_lock); + iTCO_vendor_pre_stop(iTCO_wdt_private.ACPIBASE); + /* Bit 11: TCO Timer Halt -> 1 = The TCO timer is disabled */ val = inw(TCO1_CNT); val |= 0x0800; @@ -293,6 +312,8 @@ static int iTCO_wdt_keepalive(void) { spin_lock(&iTCO_wdt_private.io_lock); + iTCO_vendor_pre_keepalive(iTCO_wdt_private.ACPIBASE, heartbeat); + /* Reload the timer by writing to the TCO Timer Counter register */ if (iTCO_wdt_private.iTCO_version == 2) { outw(0x01, TCO_RLD); @@ -319,6 +340,8 @@ static int iTCO_wdt_set_heartbeat(int t) ((iTCO_wdt_private.iTCO_version == 1) && (tmrval > 0x03f))) return -EINVAL; + iTCO_vendor_pre_set_heartbeat(tmrval); + /* Write new heartbeat to watchdog */ if (iTCO_wdt_private.iTCO_version == 2) { spin_lock(&iTCO_wdt_private.io_lock); @@ -569,7 +592,7 @@ static int iTCO_wdt_init(struct pci_dev *pdev, const struct pci_device_id *ent, } /* Check chipset's NO_REBOOT bit */ - if (iTCO_wdt_unset_NO_REBOOT_bit()) { + if (iTCO_wdt_unset_NO_REBOOT_bit() && iTCO_vendor_check_noreboot_on()) { printk(KERN_ERR PFX "failed to reset NO_REBOOT flag, reboot disabled by hardware\n"); ret = -ENODEV; /* Cannot reset NO_REBOOT bit */ goto out; diff --git a/drivers/char/watchdog/pc87413_wdt.c b/drivers/char/watchdog/pc87413_wdt.c new file mode 100644 index 00000000000..1d447e32af4 --- /dev/null +++ b/drivers/char/watchdog/pc87413_wdt.c @@ -0,0 +1,635 @@ +/* + * NS pc87413-wdt Watchdog Timer driver for Linux 2.6.x.x + * + * This code is based on wdt.c with original copyright. + * + * (C) Copyright 2006 Sven Anders, <anders@anduras.de> + * and Marcus Junker, <junker@anduras.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Neither Sven Anders, Marcus Junker nor ANDURAS AG + * admit liability nor provide warranty for any of this software. + * This material is provided "AS-IS" and at no charge. + * + * Release 1.1 + */ + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/miscdevice.h> +#include <linux/watchdog.h> +#include <linux/ioport.h> +#include <linux/delay.h> +#include <linux/notifier.h> +#include <linux/fs.h> +#include <linux/reboot.h> +#include <linux/init.h> +#include <linux/spinlock.h> +#include <linux/moduleparam.h> +#include <linux/version.h> + +#include <asm/io.h> +#include <asm/uaccess.h> +#include <asm/system.h> + +/* #define DEBUG 1 */ + +#define DEFAULT_TIMEOUT 1 /* 1 minute */ +#define MAX_TIMEOUT 255 + +#define VERSION "1.1" +#define MODNAME "pc87413 WDT" +#define PFX MODNAME ": " +#define DPFX MODNAME " - DEBUG: " + +#define WDT_INDEX_IO_PORT (io+0) /* I/O port base (index register) */ +#define WDT_DATA_IO_PORT (WDT_INDEX_IO_PORT+1) +#define SWC_LDN 0x04 +#define SIOCFG2 0x22 /* Serial IO register */ +#define WDCTL 0x10 /* Watchdog-Timer-Controll-Register */ +#define WDTO 0x11 /* Watchdog timeout register */ +#define WDCFG 0x12 /* Watchdog config register */ + +static int io = 0x2E; /* Address used on Portwell Boards */ + +static int timeout = DEFAULT_TIMEOUT; /* timeout value */ +static unsigned long timer_enabled = 0; /* is the timer enabled? */ + +static char expect_close; /* is the close expected? */ + +static spinlock_t io_lock; /* to guard the watchdog from io races */ + +static int nowayout = WATCHDOG_NOWAYOUT; + +/* -- Low level function ----------------------------------------*/ + +/* Select pins for Watchdog output */ + +static inline void pc87413_select_wdt_out (void) +{ + unsigned int cr_data = 0; + + /* Step 1: Select multiple pin,pin55,as WDT output */ + + outb_p(SIOCFG2, WDT_INDEX_IO_PORT); + + cr_data = inb (WDT_DATA_IO_PORT); + + cr_data |= 0x80; /* Set Bit7 to 1*/ + outb_p(SIOCFG2, WDT_INDEX_IO_PORT); + + outb_p(cr_data, WDT_DATA_IO_PORT); + +#ifdef DEBUG + printk(KERN_INFO DPFX "Select multiple pin,pin55,as WDT output:" + " Bit7 to 1: %d\n", cr_data); +#endif +} + +/* Enable SWC functions */ + +static inline void pc87413_enable_swc(void) +{ + unsigned int cr_data=0; + + /* Step 2: Enable SWC functions */ + + outb_p(0x07, WDT_INDEX_IO_PORT); /* Point SWC_LDN (LDN=4) */ + outb_p(SWC_LDN, WDT_DATA_IO_PORT); + + outb_p(0x30, WDT_INDEX_IO_PORT); /* Read Index 0x30 First */ + cr_data = inb(WDT_DATA_IO_PORT); + cr_data |= 0x01; /* Set Bit0 to 1 */ + outb_p(0x30, WDT_INDEX_IO_PORT); + outb_p(cr_data, WDT_DATA_IO_PORT); /* Index0x30_bit0P1 */ + +#ifdef DEBUG + printk(KERN_INFO DPFX "pc87413 - Enable SWC functions\n"); +#endif +} + +/* Read SWC I/O base address */ + +static inline unsigned int pc87413_get_swc_base(void) +{ + unsigned int swc_base_addr = 0; + unsigned char addr_l, addr_h = 0; + + /* Step 3: Read SWC I/O Base Address */ + + outb_p(0x60, WDT_INDEX_IO_PORT); /* Read Index 0x60 */ + addr_h = inb(WDT_DATA_IO_PORT); + + outb_p(0x61, WDT_INDEX_IO_PORT); /* Read Index 0x61 */ + + addr_l = inb(WDT_DATA_IO_PORT); + + swc_base_addr = (addr_h << 8) + addr_l; + +#ifdef DEBUG + printk(KERN_INFO DPFX "Read SWC I/O Base Address: low %d, high %d," + " res %d\n", addr_l, addr_h, swc_base_addr); +#endif + + return swc_base_addr; +} + +/* Select Bank 3 of SWC */ + +static inline void pc87413_swc_bank3(unsigned int swc_base_addr) +{ + /* Step 4: Select Bank3 of SWC */ + + outb_p(inb(swc_base_addr + 0x0f) | 0x03, swc_base_addr + 0x0f); + +#ifdef DEBUG + printk(KERN_INFO DPFX "Select Bank3 of SWC\n"); +#endif +} + +/* Set watchdog timeout to x minutes */ + +static inline void pc87413_programm_wdto(unsigned int swc_base_addr, + char pc87413_time) +{ + /* Step 5: Programm WDTO, Twd. */ + + outb_p(pc87413_time, swc_base_addr + WDTO); + +#ifdef DEBUG + printk(KERN_INFO DPFX "Set WDTO to %d minutes\n", pc87413_time); +#endif +} + +/* Enable WDEN */ + +static inline void pc87413_enable_wden(unsigned int swc_base_addr) +{ + /* Step 6: Enable WDEN */ + + outb_p(inb (swc_base_addr + WDCTL) | 0x01, swc_base_addr + WDCTL); + +#ifdef DEBUG + printk(KERN_INFO DPFX "Enable WDEN\n"); +#endif +} + +/* Enable SW_WD_TREN */ +static inline void pc87413_enable_sw_wd_tren(unsigned int swc_base_addr) +{ + /* Enable SW_WD_TREN */ + + outb_p(inb (swc_base_addr + WDCFG) | 0x80, swc_base_addr + WDCFG); + +#ifdef DEBUG + printk(KERN_INFO DPFX "Enable SW_WD_TREN\n"); +#endif +} + +/* Disable SW_WD_TREN */ + +static inline void pc87413_disable_sw_wd_tren(unsigned int swc_base_addr) +{ + /* Disable SW_WD_TREN */ + + outb_p(inb (swc_base_addr + WDCFG) & 0x7f, swc_base_addr + WDCFG); + +#ifdef DEBUG + printk(KERN_INFO DPFX "pc87413 - Disable SW_WD_TREN\n"); +#endif +} + +/* Enable SW_WD_TRG */ + +static inline void pc87413_enable_sw_wd_trg(unsigned int swc_base_addr) +{ + /* Enable SW_WD_TRG */ + + outb_p(inb (swc_base_addr + WDCTL) | 0x80, swc_base_addr + WDCTL); + +#ifdef DEBUG + printk(KERN_INFO DPFX "pc87413 - Enable SW_WD_TRG\n"); +#endif +} + +/* Disable SW_WD_TRG */ + +static inline void pc87413_disable_sw_wd_trg(unsigned int swc_base_addr) +{ + /* Disable SW_WD_TRG */ + + outb_p(inb (swc_base_addr + WDCTL) & 0x7f, swc_base_addr + WDCTL); + +#ifdef DEBUG + printk(KERN_INFO DPFX "Disable SW_WD_TRG\n"); +#endif +} + +/* -- Higher level functions ------------------------------------*/ + +/* Enable the watchdog */ + +static void pc87413_enable(void) +{ + unsigned int swc_base_addr; + + spin_lock(&io_lock); + + pc87413_select_wdt_out(); + pc87413_enable_swc(); + swc_base_addr = pc87413_get_swc_base(); + pc87413_swc_bank3(swc_base_addr); + pc87413_programm_wdto(swc_base_addr, timeout); + pc87413_enable_wden(swc_base_addr); + pc87413_enable_sw_wd_tren(swc_base_addr); + pc87413_enable_sw_wd_trg(swc_base_addr); + + spin_unlock(&io_lock); +} + +/* Disable the watchdog */ + +static void pc87413_disable(void) +{ + unsigned int swc_base_addr; + + spin_lock(&io_lock); + + pc87413_select_wdt_out(); + pc87413_enable_swc(); + swc_base_addr = pc87413_get_swc_base(); + pc87413_swc_bank3(swc_base_addr); + pc87413_disable_sw_wd_tren(swc_base_addr); + pc87413_disable_sw_wd_trg(swc_base_addr); + pc87413_programm_wdto(swc_base_addr, 0); + + spin_unlock(&io_lock); +} + +/* Refresh the watchdog */ + +static void pc87413_refresh(void) +{ + unsigned int swc_base_addr; + + spin_lock(&io_lock); + + pc87413_select_wdt_out(); + pc87413_enable_swc(); + swc_base_addr = pc87413_get_swc_base(); + pc87413_swc_bank3(swc_base_addr); + pc87413_disable_sw_wd_tren(swc_base_addr); + pc87413_disable_sw_wd_trg(swc_base_addr); + pc87413_programm_wdto(swc_base_addr, timeout); + pc87413_enable_wden(swc_base_addr); + pc87413_enable_sw_wd_tren(swc_base_addr); + pc87413_enable_sw_wd_trg(swc_base_addr); + + spin_unlock(&io_lock); +} + +/* -- File operations -------------------------------------------*/ + +/** + * pc87413_open: + * @inode: inode of device + * @file: file handle to device + * + */ + +static int pc87413_open(struct inode *inode, struct file *file) +{ + /* /dev/watchdog can only be opened once */ + + if (test_and_set_bit(0, &timer_enabled)) + return -EBUSY; + + if (nowayout) + __module_get(THIS_MODULE); + + /* Reload and activate timer */ + pc87413_refresh(); + + printk(KERN_INFO MODNAME "Watchdog enabled. Timeout set to" + " %d minute(s).\n", timeout); + + return nonseekable_open(inode, file); +} + +/** + * pc87413_release: + * @inode: inode to board + * @file: file handle to board + * + * The watchdog has a configurable API. There is a religious dispute + * between people who want their watchdog to be able to shut down and + * those who want to be sure if the watchdog manager dies the machine + * reboots. In the former case we disable the counters, in the latter + * case you have to open it again very soon. + */ + +static int pc87413_release(struct inode *inode, struct file *file) +{ + /* Shut off the timer. */ + + if (expect_close == 42) { + pc87413_disable(); + printk(KERN_INFO MODNAME "Watchdog disabled," + " sleeping again...\n"); + } else { + printk(KERN_CRIT MODNAME "Unexpected close, not stopping" + " watchdog!\n"); + pc87413_refresh(); + } + + clear_bit(0, &timer_enabled); + expect_close = 0; + + return 0; +} + +/** + * pc87413_status: + * + * return, if the watchdog is enabled (timeout is set...) + */ + + +static int pc87413_status(void) +{ + return 0; /* currently not supported */ +} + +/** + * pc87413_write: + * @file: file handle to the watchdog + * @data: data buffer to write + * @len: length in bytes + * @ppos: pointer to the position to write. No seeks allowed + * + * A write to a watchdog device is defined as a keepalive signal. Any + * write of data will do, as we we don't define content meaning. + */ + +static ssize_t pc87413_write(struct file *file, const char __user *data, + size_t len, loff_t *ppos) +{ + /* See if we got the magic character 'V' and reload the timer */ + if (len) { + if (!nowayout) { + size_t i; + + /* reset expect flag */ + expect_close = 0; + + /* scan to see whether or not we got the magic character */ + for (i = 0; i != len; i++) { + char c; + if (get_user(c, data+i)) + return -EFAULT; + if (c == 'V') + expect_close = 42; + } + } + + /* someone wrote to us, we should reload the timer */ + pc87413_refresh(); + } + return len; +} + +/** + * pc87413_ioctl: + * @inode: inode of the device + * @file: file handle to the device + * @cmd: watchdog command + * @arg: argument pointer + * + * The watchdog API defines a common set of functions for all watchdogs + * according to their available features. We only actually usefully support + * querying capabilities and current status. + */ + +static int pc87413_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg) +{ + int new_timeout; + + union { + struct watchdog_info __user *ident; + int __user *i; + } uarg; + + static struct watchdog_info ident = { + .options = WDIOF_KEEPALIVEPING | + WDIOF_SETTIMEOUT | + WDIOF_MAGICCLOSE, + .firmware_version = 1, + .identity = "PC87413(HF/F) watchdog" + }; + + uarg.i = (int __user *)arg; + + switch(cmd) { + default: + return -ENOTTY; + + case WDIOC_GETSUPPORT: + return copy_to_user(uarg.ident, &ident, + sizeof(ident)) ? -EFAULT : 0; + + case WDIOC_GETSTATUS: + return put_user(pc87413_status(), uarg.i); + + case WDIOC_GETBOOTSTATUS: + return put_user(0, uarg.i); + + case WDIOC_KEEPALIVE: + pc87413_refresh(); +#ifdef DEBUG + printk(KERN_INFO DPFX "keepalive\n"); +#endif + return 0; + + case WDIOC_SETTIMEOUT: + if (get_user(new_timeout, uarg.i)) + return -EFAULT; + + // the API states this is given in secs + new_timeout /= 60; + + if (new_timeout < 0 || new_timeout > MAX_TIMEOUT) + return -EINVAL; + + timeout = new_timeout; + pc87413_refresh(); + + // fall through and return the new timeout... + + case WDIOC_GETTIMEOUT: + + new_timeout = timeout * 60; + + return put_user(new_timeout, uarg.i); + + case WDIOC_SETOPTIONS: + { + int options, retval = -EINVAL; + + if (get_user(options, uarg.i)) + return -EFAULT; + + if (options & WDIOS_DISABLECARD) { + pc87413_disable(); + retval = 0; + } + + if (options & WDIOS_ENABLECARD) { + pc87413_enable(); + retval = 0; + } + + return retval; + } + } +} + +/* -- Notifier funtions -----------------------------------------*/ + +/** + * notify_sys: + * @this: our notifier block + * @code: the event being reported + * @unused: unused + * + * Our notifier is called on system shutdowns. We want to turn the card + * off at reboot otherwise the machine will reboot again during memory + * test or worse yet during the following fsck. This would suck, in fact + * trust me - if it happens it does suck. + */ + +static int pc87413_notify_sys(struct notifier_block *this, + unsigned long code, + void *unused) +{ + if (code == SYS_DOWN || code == SYS_HALT) + { + /* Turn the card off */ + pc87413_disable(); + } + return NOTIFY_DONE; +} + +/* -- Module's structures ---------------------------------------*/ + +static struct file_operations pc87413_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = pc87413_write, + .ioctl = pc87413_ioctl, + .open = pc87413_open, + .release = pc87413_release, +}; + +static struct notifier_block pc87413_notifier = +{ + .notifier_call = pc87413_notify_sys, +}; + +static struct miscdevice pc87413_miscdev= +{ + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &pc87413_fops +}; + +/* -- Module init functions -------------------------------------*/ + +/** + * pc87413_init: module's "constructor" + * + * Set up the WDT watchdog board. All we have to do is grab the + * resources we require and bitch if anyone beat us to them. + * The open() function will actually kick the board off. + */ + +static int __init pc87413_init(void) +{ + int ret; + + spin_lock_init(&io_lock); + + printk(KERN_INFO PFX "Version " VERSION " at io 0x%X\n", WDT_INDEX_IO_PORT); + + /* request_region(io, 2, "pc87413"); */ + + ret = register_reboot_notifier(&pc87413_notifier); + if (ret != 0) { + printk(KERN_ERR PFX "cannot register reboot notifier (err=%d)\n", + ret); + } + + ret = misc_register(&pc87413_miscdev); + + if (ret != 0) { + printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n", + WATCHDOG_MINOR, ret); + unregister_reboot_notifier(&pc87413_notifier); + return ret; + } + + printk(KERN_INFO PFX "initialized. timeout=%d min \n", timeout); + + pc87413_enable(); + + return 0; +} + +/** + * pc87413_exit: module's "destructor" + * + * Unload the watchdog. You cannot do this with any file handles open. + * If your watchdog is set to continue ticking on close and you unload + * it, well it keeps ticking. We won't get the interrupt but the board + * will not touch PC memory so all is fine. You just have to load a new + * module in 60 seconds or reboot. + */ + +static void __exit pc87413_exit(void) +{ + /* Stop the timer before we leave */ + if (!nowayout) + { + pc87413_disable(); + printk(KERN_INFO MODNAME "Watchdog disabled.\n"); + } + + misc_deregister(&pc87413_miscdev); + unregister_reboot_notifier(&pc87413_notifier); + /* release_region(io,2); */ + + printk(MODNAME " watchdog component driver removed.\n"); +} + +module_init(pc87413_init); +module_exit(pc87413_exit); + +MODULE_AUTHOR("Sven Anders <anders@anduras.de>, Marcus Junker <junker@anduras.de>,"); +MODULE_DESCRIPTION("PC87413 WDT driver"); +MODULE_LICENSE("GPL"); + +MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); + +module_param(io, int, 0); +MODULE_PARM_DESC(io, MODNAME " I/O port (default: " __MODULE_STRING(io) ")."); + +module_param(timeout, int, 0); +MODULE_PARM_DESC(timeout, "Watchdog timeout in minutes (default=" __MODULE_STRING(timeout) ")."); + +module_param(nowayout, int, 0); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=CONFIG_WATCHDOG_NOWAYOUT)"); + diff --git a/drivers/char/watchdog/pcwd_usb.c b/drivers/char/watchdog/pcwd_usb.c index bda45334d80..e275dd4a705 100644 --- a/drivers/char/watchdog/pcwd_usb.c +++ b/drivers/char/watchdog/pcwd_usb.c @@ -561,8 +561,7 @@ static struct notifier_block usb_pcwd_notifier = { */ static inline void usb_pcwd_delete (struct usb_pcwd_private *usb_pcwd) { - if (usb_pcwd->intr_urb != NULL) - usb_free_urb (usb_pcwd->intr_urb); + usb_free_urb(usb_pcwd->intr_urb); if (usb_pcwd->intr_buffer != NULL) usb_buffer_free(usb_pcwd->udev, usb_pcwd->intr_size, usb_pcwd->intr_buffer, usb_pcwd->intr_dma); diff --git a/drivers/char/watchdog/rm9k_wdt.c b/drivers/char/watchdog/rm9k_wdt.c new file mode 100644 index 00000000000..ec3909371c2 --- /dev/null +++ b/drivers/char/watchdog/rm9k_wdt.c @@ -0,0 +1,420 @@ +/* + * Watchdog implementation for GPI h/w found on PMC-Sierra RM9xxx + * chips. + * + * Copyright (C) 2004 by Basler Vision Technologies AG + * Author: Thomas Koeller <thomas.koeller@baslerweb.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/platform_device.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/interrupt.h> +#include <linux/fs.h> +#include <linux/reboot.h> +#include <linux/notifier.h> +#include <linux/miscdevice.h> +#include <linux/watchdog.h> +#include <asm/io.h> +#include <asm/atomic.h> +#include <asm/processor.h> +#include <asm/uaccess.h> +#include <asm/system.h> +#include <asm/rm9k-ocd.h> + +#include <rm9k_wdt.h> + + +#define CLOCK 125000000 +#define MAX_TIMEOUT_SECONDS 32 +#define CPCCR 0x0080 +#define CPGIG1SR 0x0044 +#define CPGIG1ER 0x0054 + + +/* Function prototypes */ +static irqreturn_t wdt_gpi_irqhdl(int, void *, struct pt_regs *); +static void wdt_gpi_start(void); +static void wdt_gpi_stop(void); +static void wdt_gpi_set_timeout(unsigned int); +static int wdt_gpi_open(struct inode *, struct file *); +static int wdt_gpi_release(struct inode *, struct file *); +static ssize_t wdt_gpi_write(struct file *, const char __user *, size_t, loff_t *); +static long wdt_gpi_ioctl(struct file *, unsigned int, unsigned long); +static int wdt_gpi_notify(struct notifier_block *, unsigned long, void *); +static const struct resource *wdt_gpi_get_resource(struct platform_device *, const char *, unsigned int); +static int __init wdt_gpi_probe(struct device *); +static int __exit wdt_gpi_remove(struct device *); + + +static const char wdt_gpi_name[] = "wdt_gpi"; +static atomic_t opencnt; +static int expect_close; +static int locked; + + +/* These are set from device resources */ +static void __iomem * wd_regs; +static unsigned int wd_irq, wd_ctr; + + +/* Module arguments */ +static int timeout = MAX_TIMEOUT_SECONDS; +module_param(timeout, int, 0444); +MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds"); + +static unsigned long resetaddr = 0xbffdc200; +module_param(resetaddr, ulong, 0444); +MODULE_PARM_DESC(resetaddr, "Address to write to to force a reset"); + +static unsigned long flagaddr = 0xbffdc104; +module_param(flagaddr, ulong, 0444); +MODULE_PARM_DESC(flagaddr, "Address to write to boot flags to"); + +static int powercycle; +module_param(powercycle, bool, 0444); +MODULE_PARM_DESC(powercycle, "Cycle power if watchdog expires"); + +static int nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0444); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be disabled once started"); + + +/* Interrupt handler */ +static irqreturn_t wdt_gpi_irqhdl(int irq, void *ctxt, struct pt_regs *regs) +{ + if (!unlikely(__raw_readl(wd_regs + 0x0008) & 0x1)) + return IRQ_NONE; + __raw_writel(0x1, wd_regs + 0x0008); + + + printk(KERN_CRIT "%s: watchdog expired - resetting system\n", + wdt_gpi_name); + + *(volatile char *) flagaddr |= 0x01; + *(volatile char *) resetaddr = powercycle ? 0x01 : 0x2; + iob(); + while (1) + cpu_relax(); +} + + +/* Watchdog functions */ +static void wdt_gpi_start(void) +{ + u32 reg; + + lock_titan_regs(); + reg = titan_readl(CPGIG1ER); + titan_writel(reg | (0x100 << wd_ctr), CPGIG1ER); + iob(); + unlock_titan_regs(); +} + +static void wdt_gpi_stop(void) +{ + u32 reg; + + lock_titan_regs(); + reg = titan_readl(CPCCR) & ~(0xf << (wd_ctr * 4)); + titan_writel(reg, CPCCR); + reg = titan_readl(CPGIG1ER); + titan_writel(reg & ~(0x100 << wd_ctr), CPGIG1ER); + iob(); + unlock_titan_regs(); +} + +static void wdt_gpi_set_timeout(unsigned int to) +{ + u32 reg; + const u32 wdval = (to * CLOCK) & ~0x0000000f; + + lock_titan_regs(); + reg = titan_readl(CPCCR) & ~(0xf << (wd_ctr * 4)); + titan_writel(reg, CPCCR); + wmb(); + __raw_writel(wdval, wd_regs + 0x0000); + wmb(); + titan_writel(reg | (0x2 << (wd_ctr * 4)), CPCCR); + wmb(); + titan_writel(reg | (0x5 << (wd_ctr * 4)), CPCCR); + iob(); + unlock_titan_regs(); +} + + +/* /dev/watchdog operations */ +static int wdt_gpi_open(struct inode *inode, struct file *file) +{ + int res; + + if (unlikely(atomic_dec_if_positive(&opencnt) < 0)) + return -EBUSY; + + expect_close = 0; + if (locked) { + module_put(THIS_MODULE); + free_irq(wd_irq, &miscdev); + locked = 0; + } + + res = request_irq(wd_irq, wdt_gpi_irqhdl, SA_SHIRQ | SA_INTERRUPT, + wdt_gpi_name, &miscdev); + if (unlikely(res)) + return res; + + wdt_gpi_set_timeout(timeout); + wdt_gpi_start(); + + printk(KERN_INFO "%s: watchdog started, timeout = %u seconds\n", + wdt_gpi_name, timeout); + return nonseekable_open(inode, file); +} + +static int wdt_gpi_release(struct inode *inode, struct file *file) +{ + if (nowayout) { + printk(KERN_INFO "%s: no way out - watchdog left running\n", + wdt_gpi_name); + __module_get(THIS_MODULE); + locked = 1; + } else { + if (expect_close) { + wdt_gpi_stop(); + free_irq(wd_irq, &miscdev); + printk(KERN_INFO "%s: watchdog stopped\n", wdt_gpi_name); + } else { + printk(KERN_CRIT "%s: unexpected close() -" + " watchdog left running\n", + wdt_gpi_name); + wdt_gpi_set_timeout(timeout); + __module_get(THIS_MODULE); + locked = 1; + } + } + + atomic_inc(&opencnt); + return 0; +} + +static ssize_t +wdt_gpi_write(struct file *f, const char __user *d, size_t s, loff_t *o) +{ + char val; + + wdt_gpi_set_timeout(timeout); + expect_close = (s > 0) && !get_user(val, d) && (val == 'V'); + return s ? 1 : 0; +} + +static long +wdt_gpi_ioctl(struct file *f, unsigned int cmd, unsigned long arg) +{ + long res = -ENOTTY; + const long size = _IOC_SIZE(cmd); + int stat; + void __user *argp = (void __user *)arg; + static struct watchdog_info wdinfo = { + .identity = "RM9xxx/GPI watchdog", + .firmware_version = 0, + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING + }; + + if (unlikely(_IOC_TYPE(cmd) != WATCHDOG_IOCTL_BASE)) + return -ENOTTY; + + if ((_IOC_DIR(cmd) & _IOC_READ) + && !access_ok(VERIFY_WRITE, arg, size)) + return -EFAULT; + + if ((_IOC_DIR(cmd) & _IOC_WRITE) + && !access_ok(VERIFY_READ, arg, size)) + return -EFAULT; + + expect_close = 0; + + switch (cmd) { + case WDIOC_GETSUPPORT: + wdinfo.options = nowayout ? + WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING : + WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE; + res = __copy_to_user(argp, &wdinfo, size) ? -EFAULT : size; + break; + + case WDIOC_GETSTATUS: + break; + + case WDIOC_GETBOOTSTATUS: + stat = (*(volatile char *) flagaddr & 0x01) + ? WDIOF_CARDRESET : 0; + res = __copy_to_user(argp, &stat, size) ? + -EFAULT : size; + break; + + case WDIOC_SETOPTIONS: + break; + + case WDIOC_KEEPALIVE: + wdt_gpi_set_timeout(timeout); + res = size; + break; + + case WDIOC_SETTIMEOUT: + { + int val; + if (unlikely(__copy_from_user(&val, argp, size))) { + res = -EFAULT; + break; + } + + if (val > MAX_TIMEOUT_SECONDS) + val = MAX_TIMEOUT_SECONDS; + timeout = val; + wdt_gpi_set_timeout(val); + res = size; + printk(KERN_INFO "%s: timeout set to %u seconds\n", + wdt_gpi_name, timeout); + } + break; + + case WDIOC_GETTIMEOUT: + res = __copy_to_user(argp, &timeout, size) ? + -EFAULT : size; + break; + } + + return res; +} + + +/* Shutdown notifier */ +static int +wdt_gpi_notify(struct notifier_block *this, unsigned long code, void *unused) +{ + if (code == SYS_DOWN || code == SYS_HALT) + wdt_gpi_stop(); + + return NOTIFY_DONE; +} + + +/* Kernel interfaces */ +static struct file_operations fops = { + .owner = THIS_MODULE, + .open = wdt_gpi_open, + .release = wdt_gpi_release, + .write = wdt_gpi_write, + .unlocked_ioctl = wdt_gpi_ioctl, +}; + +static struct miscdevice miscdev = { + .minor = WATCHDOG_MINOR, + .name = wdt_gpi_name, + .fops = &fops, +}; + +static struct notifier_block wdt_gpi_shutdown = { + .notifier_call = wdt_gpi_notify, +}; + + +/* Init & exit procedures */ +static const struct resource * +wdt_gpi_get_resource(struct platform_device *pdv, const char *name, + unsigned int type) +{ + char buf[80]; + if (snprintf(buf, sizeof buf, "%s_0", name) >= sizeof buf) + return NULL; + return platform_get_resource_byname(pdv, type, buf); +} + +/* No hotplugging on the platform bus - use __init */ +static int __init wdt_gpi_probe(struct device *dev) +{ + int res; + struct platform_device * const pdv = to_platform_device(dev); + const struct resource + * const rr = wdt_gpi_get_resource(pdv, WDT_RESOURCE_REGS, + IORESOURCE_MEM), + * const ri = wdt_gpi_get_resource(pdv, WDT_RESOURCE_IRQ, + IORESOURCE_IRQ), + * const rc = wdt_gpi_get_resource(pdv, WDT_RESOURCE_COUNTER, + 0); + + if (unlikely(!rr || !ri || !rc)) + return -ENXIO; + + wd_regs = ioremap_nocache(rr->start, rr->end + 1 - rr->start); + if (unlikely(!wd_regs)) + return -ENOMEM; + wd_irq = ri->start; + wd_ctr = rc->start; + res = misc_register(&miscdev); + if (res) + iounmap(wd_regs); + else + register_reboot_notifier(&wdt_gpi_shutdown); + return res; +} + +static int __exit wdt_gpi_remove(struct device *dev) +{ + int res; + + unregister_reboot_notifier(&wdt_gpi_shutdown); + res = misc_deregister(&miscdev); + iounmap(wd_regs); + wd_regs = NULL; + return res; +} + + +/* Device driver init & exit */ +static struct device_driver wdt_gpi_driver = { + .name = (char *) wdt_gpi_name, + .bus = &platform_bus_type, + .owner = THIS_MODULE, + .probe = wdt_gpi_probe, + .remove = __exit_p(wdt_gpi_remove), + .shutdown = NULL, + .suspend = NULL, + .resume = NULL, +}; + +static int __init wdt_gpi_init_module(void) +{ + atomic_set(&opencnt, 1); + if (timeout > MAX_TIMEOUT_SECONDS) + timeout = MAX_TIMEOUT_SECONDS; + return driver_register(&wdt_gpi_driver); +} + +static void __exit wdt_gpi_cleanup_module(void) +{ + driver_unregister(&wdt_gpi_driver); +} + +module_init(wdt_gpi_init_module); +module_exit(wdt_gpi_cleanup_module); + +MODULE_AUTHOR("Thomas Koeller <thomas.koeller@baslerweb.com>"); +MODULE_DESCRIPTION("Basler eXcite watchdog driver for gpi devices"); +MODULE_VERSION("0.1"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); + diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 510816c16da..04bee524e31 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -125,6 +125,7 @@ config I2C_I801 ICH7 ESB2 ICH8 + ICH9 This driver can also be built as a module. If so, the module will be called i2c-i801. diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index bbb2fbee836..c7be2fdbd86 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -33,6 +33,7 @@ ICH7 27DA ESB2 269B ICH8 283E + ICH9 2930 This driver supports several versions of Intel's I/O Controller Hubs (ICH). For SMBus support, they are similar to the PIIX4 and are part of Intel's '810' and other chipsets. @@ -457,6 +458,7 @@ static struct pci_device_id i801_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_17) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_17) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_5) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_6) }, { 0, } }; diff --git a/drivers/i2c/busses/i2c-ixp4xx.c b/drivers/i2c/busses/i2c-ixp4xx.c index 05fffb9415a..68fe863f9d5 100644 --- a/drivers/i2c/busses/i2c-ixp4xx.c +++ b/drivers/i2c/busses/i2c-ixp4xx.c @@ -138,7 +138,7 @@ static int ixp4xx_i2c_probe(struct platform_device *plat_dev) gpio_line_set(gpio->sda_pin, 0); err = i2c_bit_add_bus(&drv_data->adapter); - if (err != 0) + if (err) { printk(KERN_ERR "ERROR: Could not install %s\n", plat_dev->dev.bus_id); kfree(drv_data); diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c index 3f869033ed7..94a4e9a3013 100644 --- a/drivers/i2c/i2c-dev.c +++ b/drivers/i2c/i2c-dev.c @@ -42,7 +42,7 @@ static struct i2c_driver i2cdev_driver; struct i2c_dev { struct list_head list; struct i2c_adapter *adap; - struct class_device *class_dev; + struct device *dev; }; #define I2C_MINORS 256 @@ -92,15 +92,16 @@ static void return_i2c_dev(struct i2c_dev *i2c_dev) spin_unlock(&i2c_dev_list_lock); } -static ssize_t show_adapter_name(struct class_device *class_dev, char *buf) +static ssize_t show_adapter_name(struct device *dev, + struct device_attribute *attr, char *buf) { - struct i2c_dev *i2c_dev = i2c_dev_get_by_minor(MINOR(class_dev->devt)); + struct i2c_dev *i2c_dev = i2c_dev_get_by_minor(MINOR(dev->devt)); if (!i2c_dev) return -ENODEV; return sprintf(buf, "%s\n", i2c_dev->adap->name); } -static CLASS_DEVICE_ATTR(name, S_IRUGO, show_adapter_name, NULL); +static DEVICE_ATTR(name, S_IRUGO, show_adapter_name, NULL); static ssize_t i2cdev_read (struct file *file, char __user *buf, size_t count, loff_t *offset) @@ -413,15 +414,14 @@ static int i2cdev_attach_adapter(struct i2c_adapter *adap) return PTR_ERR(i2c_dev); /* register this i2c device with the driver core */ - i2c_dev->class_dev = class_device_create(i2c_dev_class, NULL, - MKDEV(I2C_MAJOR, adap->nr), - &adap->dev, "i2c-%d", - adap->nr); - if (!i2c_dev->class_dev) { + i2c_dev->dev = device_create(i2c_dev_class, &adap->dev, + MKDEV(I2C_MAJOR, adap->nr), + "i2c-%d", adap->nr); + if (!i2c_dev->dev) { res = -ENODEV; goto error; } - res = class_device_create_file(i2c_dev->class_dev, &class_device_attr_name); + res = device_create_file(i2c_dev->dev, &dev_attr_name); if (res) goto error_destroy; @@ -429,7 +429,7 @@ static int i2cdev_attach_adapter(struct i2c_adapter *adap) adap->name, adap->nr); return 0; error_destroy: - class_device_destroy(i2c_dev_class, MKDEV(I2C_MAJOR, adap->nr)); + device_destroy(i2c_dev_class, MKDEV(I2C_MAJOR, adap->nr)); error: return_i2c_dev(i2c_dev); kfree(i2c_dev); @@ -444,9 +444,9 @@ static int i2cdev_detach_adapter(struct i2c_adapter *adap) if (!i2c_dev) /* attach_adapter must have failed */ return 0; - class_device_remove_file(i2c_dev->class_dev, &class_device_attr_name); + device_remove_file(i2c_dev->dev, &dev_attr_name); return_i2c_dev(i2c_dev); - class_device_destroy(i2c_dev_class, MKDEV(I2C_MAJOR, adap->nr)); + device_destroy(i2c_dev_class, MKDEV(I2C_MAJOR, adap->nr)); kfree(i2c_dev); pr_debug("i2c-dev: adapter [%s] unregistered\n", adap->name); diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 8ccee9c769f..e3a267622bb 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -1635,7 +1635,7 @@ static int idefloppy_begin_format(ide_drive_t *drive, int __user *arg) /* ** Get ATAPI_FORMAT_UNIT progress indication. ** -** Userland gives a pointer to an int. The int is set to a progresss +** Userland gives a pointer to an int. The int is set to a progress ** indicator 0-65536, with 65536=100%. ** ** If the drive does not support format progress indication, we just check diff --git a/drivers/ide/pci/sgiioc4.c b/drivers/ide/pci/sgiioc4.c index 244f7eb7006..cfad09accf5 100644 --- a/drivers/ide/pci/sgiioc4.c +++ b/drivers/ide/pci/sgiioc4.c @@ -768,14 +768,7 @@ ioc4_ide_init(void) return ioc4_register_submodule(&ioc4_ide_submodule); } -static void __devexit -ioc4_ide_exit(void) -{ - ioc4_unregister_submodule(&ioc4_ide_submodule); -} - late_initcall(ioc4_ide_init); /* Call only after IDE init is done */ -module_exit(ioc4_ide_exit); MODULE_AUTHOR("Aniket Malatpure/Jeremy Higdon"); MODULE_DESCRIPTION("IDE PCI driver module for SGI IOC4 Base-IO Card"); diff --git a/drivers/infiniband/core/addr.c b/drivers/infiniband/core/addr.c index 84b2f5cb372..af939796750 100644 --- a/drivers/infiniband/core/addr.c +++ b/drivers/infiniband/core/addr.c @@ -139,7 +139,7 @@ static void queue_req(struct addr_req *req) mutex_lock(&lock); list_for_each_entry_reverse(temp_req, &req_list, list) { - if (time_after(req->timeout, temp_req->timeout)) + if (time_after_eq(req->timeout, temp_req->timeout)) break; } @@ -225,19 +225,17 @@ static void process_req(struct work_struct *work) mutex_lock(&lock); list_for_each_entry_safe(req, temp_req, &req_list, list) { - if (req->status) { + if (req->status == -ENODATA) { src_in = (struct sockaddr_in *) &req->src_addr; dst_in = (struct sockaddr_in *) &req->dst_addr; req->status = addr_resolve_remote(src_in, dst_in, req->addr); + if (req->status && time_after_eq(jiffies, req->timeout)) + req->status = -ETIMEDOUT; + else if (req->status == -ENODATA) + continue; } - if (req->status && time_after(jiffies, req->timeout)) - req->status = -ETIMEDOUT; - else if (req->status == -ENODATA) - continue; - - list_del(&req->list); - list_add_tail(&req->list, &done_list); + list_move_tail(&req->list, &done_list); } if (!list_empty(&req_list)) { @@ -347,8 +345,7 @@ void rdma_addr_cancel(struct rdma_dev_addr *addr) if (req->addr == addr) { req->status = -ECANCELED; req->timeout = jiffies; - list_del(&req->list); - list_add(&req->list, &req_list); + list_move(&req->list, &req_list); set_timeout(req->timeout); break; } diff --git a/drivers/infiniband/core/cm.c b/drivers/infiniband/core/cm.c index e1990f531d0..79c937bf696 100644 --- a/drivers/infiniband/core/cm.c +++ b/drivers/infiniband/core/cm.c @@ -147,12 +147,12 @@ struct cm_id_private { __be32 rq_psn; int timeout_ms; enum ib_mtu path_mtu; + __be16 pkey; u8 private_data_len; u8 max_cm_retries; u8 peer_to_peer; u8 responder_resources; u8 initiator_depth; - u8 local_ack_timeout; u8 retry_count; u8 rnr_retry_count; u8 service_timeout; @@ -240,11 +240,10 @@ static void * cm_copy_private_data(const void *private_data, if (!private_data || !private_data_len) return NULL; - data = kmalloc(private_data_len, GFP_KERNEL); + data = kmemdup(private_data, private_data_len, GFP_KERNEL); if (!data) return ERR_PTR(-ENOMEM); - memcpy(data, private_data, private_data_len); return data; } @@ -690,7 +689,7 @@ static void cm_enter_timewait(struct cm_id_private *cm_id_priv) * timewait before notifying the user that we've exited timewait. */ cm_id_priv->id.state = IB_CM_TIMEWAIT; - wait_time = cm_convert_to_ms(cm_id_priv->local_ack_timeout); + wait_time = cm_convert_to_ms(cm_id_priv->av.packet_life_time + 1); queue_delayed_work(cm.wq, &cm_id_priv->timewait_info->work.work, msecs_to_jiffies(wait_time)); cm_id_priv->timewait_info = NULL; @@ -1009,6 +1008,7 @@ int ib_send_cm_req(struct ib_cm_id *cm_id, cm_id_priv->responder_resources = param->responder_resources; cm_id_priv->retry_count = param->retry_count; cm_id_priv->path_mtu = param->primary_path->mtu; + cm_id_priv->pkey = param->primary_path->pkey; cm_id_priv->qp_type = param->qp_type; ret = cm_alloc_msg(cm_id_priv, &cm_id_priv->msg); @@ -1023,8 +1023,6 @@ int ib_send_cm_req(struct ib_cm_id *cm_id, cm_id_priv->local_qpn = cm_req_get_local_qpn(req_msg); cm_id_priv->rq_psn = cm_req_get_starting_psn(req_msg); - cm_id_priv->local_ack_timeout = - cm_req_get_primary_local_ack_timeout(req_msg); spin_lock_irqsave(&cm_id_priv->lock, flags); ret = ib_post_send_mad(cm_id_priv->msg, NULL); @@ -1409,9 +1407,8 @@ static int cm_req_handler(struct cm_work *work) cm_id_priv->initiator_depth = cm_req_get_resp_res(req_msg); cm_id_priv->responder_resources = cm_req_get_init_depth(req_msg); cm_id_priv->path_mtu = cm_req_get_path_mtu(req_msg); + cm_id_priv->pkey = req_msg->pkey; cm_id_priv->sq_psn = cm_req_get_starting_psn(req_msg); - cm_id_priv->local_ack_timeout = - cm_req_get_primary_local_ack_timeout(req_msg); cm_id_priv->retry_count = cm_req_get_retry_count(req_msg); cm_id_priv->rnr_retry_count = cm_req_get_rnr_retry_count(req_msg); cm_id_priv->qp_type = cm_req_get_qp_type(req_msg); @@ -1715,7 +1712,7 @@ static int cm_establish_handler(struct cm_work *work) unsigned long flags; int ret; - /* See comment in ib_cm_establish about lookup. */ + /* See comment in cm_establish about lookup. */ cm_id_priv = cm_acquire_id(work->local_id, work->remote_id); if (!cm_id_priv) return -EINVAL; @@ -2401,11 +2398,16 @@ int ib_send_cm_lap(struct ib_cm_id *cm_id, cm_id_priv = container_of(cm_id, struct cm_id_private, id); spin_lock_irqsave(&cm_id_priv->lock, flags); if (cm_id->state != IB_CM_ESTABLISHED || - cm_id->lap_state != IB_CM_LAP_IDLE) { + (cm_id->lap_state != IB_CM_LAP_UNINIT && + cm_id->lap_state != IB_CM_LAP_IDLE)) { ret = -EINVAL; goto out; } + ret = cm_init_av_by_path(alternate_path, &cm_id_priv->alt_av); + if (ret) + goto out; + ret = cm_alloc_msg(cm_id_priv, &msg); if (ret) goto out; @@ -2430,7 +2432,8 @@ out: spin_unlock_irqrestore(&cm_id_priv->lock, flags); } EXPORT_SYMBOL(ib_send_cm_lap); -static void cm_format_path_from_lap(struct ib_sa_path_rec *path, +static void cm_format_path_from_lap(struct cm_id_private *cm_id_priv, + struct ib_sa_path_rec *path, struct cm_lap_msg *lap_msg) { memset(path, 0, sizeof *path); @@ -2442,10 +2445,10 @@ static void cm_format_path_from_lap(struct ib_sa_path_rec *path, path->hop_limit = lap_msg->alt_hop_limit; path->traffic_class = cm_lap_get_traffic_class(lap_msg); path->reversible = 1; - /* pkey is same as in REQ */ + path->pkey = cm_id_priv->pkey; path->sl = cm_lap_get_sl(lap_msg); path->mtu_selector = IB_SA_EQ; - /* mtu is same as in REQ */ + path->mtu = cm_id_priv->path_mtu; path->rate_selector = IB_SA_EQ; path->rate = cm_lap_get_packet_rate(lap_msg); path->packet_life_time_selector = IB_SA_EQ; @@ -2471,7 +2474,7 @@ static int cm_lap_handler(struct cm_work *work) param = &work->cm_event.param.lap_rcvd; param->alternate_path = &work->path[0]; - cm_format_path_from_lap(param->alternate_path, lap_msg); + cm_format_path_from_lap(cm_id_priv, param->alternate_path, lap_msg); work->cm_event.private_data = &lap_msg->private_data; spin_lock_irqsave(&cm_id_priv->lock, flags); @@ -2479,6 +2482,7 @@ static int cm_lap_handler(struct cm_work *work) goto unlock; switch (cm_id_priv->id.lap_state) { + case IB_CM_LAP_UNINIT: case IB_CM_LAP_IDLE: break; case IB_CM_MRA_LAP_SENT: @@ -2501,6 +2505,10 @@ static int cm_lap_handler(struct cm_work *work) cm_id_priv->id.lap_state = IB_CM_LAP_RCVD; cm_id_priv->tid = lap_msg->hdr.tid; + cm_init_av_for_response(work->port, work->mad_recv_wc->wc, + work->mad_recv_wc->recv_buf.grh, + &cm_id_priv->av); + cm_init_av_by_path(param->alternate_path, &cm_id_priv->alt_av); ret = atomic_inc_and_test(&cm_id_priv->work_count); if (!ret) list_add_tail(&work->list, &cm_id_priv->work_list); @@ -3039,7 +3047,7 @@ static void cm_work_handler(struct work_struct *_work) cm_free_work(work); } -int ib_cm_establish(struct ib_cm_id *cm_id) +static int cm_establish(struct ib_cm_id *cm_id) { struct cm_id_private *cm_id_priv; struct cm_work *work; @@ -3087,7 +3095,44 @@ int ib_cm_establish(struct ib_cm_id *cm_id) out: return ret; } -EXPORT_SYMBOL(ib_cm_establish); + +static int cm_migrate(struct ib_cm_id *cm_id) +{ + struct cm_id_private *cm_id_priv; + unsigned long flags; + int ret = 0; + + cm_id_priv = container_of(cm_id, struct cm_id_private, id); + spin_lock_irqsave(&cm_id_priv->lock, flags); + if (cm_id->state == IB_CM_ESTABLISHED && + (cm_id->lap_state == IB_CM_LAP_UNINIT || + cm_id->lap_state == IB_CM_LAP_IDLE)) { + cm_id->lap_state = IB_CM_LAP_IDLE; + cm_id_priv->av = cm_id_priv->alt_av; + } else + ret = -EINVAL; + spin_unlock_irqrestore(&cm_id_priv->lock, flags); + + return ret; +} + +int ib_cm_notify(struct ib_cm_id *cm_id, enum ib_event_type event) +{ + int ret; + + switch (event) { + case IB_EVENT_COMM_EST: + ret = cm_establish(cm_id); + break; + case IB_EVENT_PATH_MIG: + ret = cm_migrate(cm_id); + break; + default: + ret = -EINVAL; + } + return ret; +} +EXPORT_SYMBOL(ib_cm_notify); static void cm_recv_handler(struct ib_mad_agent *mad_agent, struct ib_mad_recv_wc *mad_recv_wc) @@ -3172,8 +3217,7 @@ static int cm_init_qp_init_attr(struct cm_id_private *cm_id_priv, case IB_CM_ESTABLISHED: *qp_attr_mask = IB_QP_STATE | IB_QP_ACCESS_FLAGS | IB_QP_PKEY_INDEX | IB_QP_PORT; - qp_attr->qp_access_flags = IB_ACCESS_LOCAL_WRITE | - IB_ACCESS_REMOTE_WRITE; + qp_attr->qp_access_flags = IB_ACCESS_REMOTE_WRITE; if (cm_id_priv->responder_resources) qp_attr->qp_access_flags |= IB_ACCESS_REMOTE_READ | IB_ACCESS_REMOTE_ATOMIC; @@ -3221,6 +3265,9 @@ static int cm_init_qp_rtr_attr(struct cm_id_private *cm_id_priv, if (cm_id_priv->alt_av.ah_attr.dlid) { *qp_attr_mask |= IB_QP_ALT_PATH; qp_attr->alt_port_num = cm_id_priv->alt_av.port->port_num; + qp_attr->alt_pkey_index = cm_id_priv->alt_av.pkey_index; + qp_attr->alt_timeout = + cm_id_priv->alt_av.packet_life_time + 1; qp_attr->alt_ah_attr = cm_id_priv->alt_av.ah_attr; } ret = 0; @@ -3247,19 +3294,31 @@ static int cm_init_qp_rts_attr(struct cm_id_private *cm_id_priv, case IB_CM_REP_SENT: case IB_CM_MRA_REP_RCVD: case IB_CM_ESTABLISHED: - *qp_attr_mask = IB_QP_STATE | IB_QP_SQ_PSN; - qp_attr->sq_psn = be32_to_cpu(cm_id_priv->sq_psn); - if (cm_id_priv->qp_type == IB_QPT_RC) { - *qp_attr_mask |= IB_QP_TIMEOUT | IB_QP_RETRY_CNT | - IB_QP_RNR_RETRY | - IB_QP_MAX_QP_RD_ATOMIC; - qp_attr->timeout = cm_id_priv->local_ack_timeout; - qp_attr->retry_cnt = cm_id_priv->retry_count; - qp_attr->rnr_retry = cm_id_priv->rnr_retry_count; - qp_attr->max_rd_atomic = cm_id_priv->initiator_depth; - } - if (cm_id_priv->alt_av.ah_attr.dlid) { - *qp_attr_mask |= IB_QP_PATH_MIG_STATE; + if (cm_id_priv->id.lap_state == IB_CM_LAP_UNINIT) { + *qp_attr_mask = IB_QP_STATE | IB_QP_SQ_PSN; + qp_attr->sq_psn = be32_to_cpu(cm_id_priv->sq_psn); + if (cm_id_priv->qp_type == IB_QPT_RC) { + *qp_attr_mask |= IB_QP_TIMEOUT | IB_QP_RETRY_CNT | + IB_QP_RNR_RETRY | + IB_QP_MAX_QP_RD_ATOMIC; + qp_attr->timeout = + cm_id_priv->av.packet_life_time + 1; + qp_attr->retry_cnt = cm_id_priv->retry_count; + qp_attr->rnr_retry = cm_id_priv->rnr_retry_count; + qp_attr->max_rd_atomic = + cm_id_priv->initiator_depth; + } + if (cm_id_priv->alt_av.ah_attr.dlid) { + *qp_attr_mask |= IB_QP_PATH_MIG_STATE; + qp_attr->path_mig_state = IB_MIG_REARM; + } + } else { + *qp_attr_mask = IB_QP_ALT_PATH | IB_QP_PATH_MIG_STATE; + qp_attr->alt_port_num = cm_id_priv->alt_av.port->port_num; + qp_attr->alt_pkey_index = cm_id_priv->alt_av.pkey_index; + qp_attr->alt_timeout = + cm_id_priv->alt_av.packet_life_time + 1; + qp_attr->alt_ah_attr = cm_id_priv->alt_av.ah_attr; qp_attr->path_mig_state = IB_MIG_REARM; } ret = 0; diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c index 189f73f3f72..985a6b564d8 100644 --- a/drivers/infiniband/core/cma.c +++ b/drivers/infiniband/core/cma.c @@ -344,7 +344,7 @@ static int cma_init_ib_qp(struct rdma_id_private *id_priv, struct ib_qp *qp) return ret; qp_attr.qp_state = IB_QPS_INIT; - qp_attr.qp_access_flags = IB_ACCESS_LOCAL_WRITE; + qp_attr.qp_access_flags = 0; qp_attr.port_num = id_priv->id.port_num; return ib_modify_qp(qp, &qp_attr, IB_QP_STATE | IB_QP_ACCESS_FLAGS | IB_QP_PKEY_INDEX | IB_QP_PORT); @@ -935,13 +935,8 @@ static int cma_req_handler(struct ib_cm_id *cm_id, struct ib_cm_event *ib_event) mutex_lock(&lock); ret = cma_acquire_dev(conn_id); mutex_unlock(&lock); - if (ret) { - ret = -ENODEV; - cma_exch(conn_id, CMA_DESTROYING); - cma_release_remove(conn_id); - rdma_destroy_id(&conn_id->id); - goto out; - } + if (ret) + goto release_conn_id; conn_id->cm_id.ib = cm_id; cm_id->context = conn_id; @@ -951,13 +946,17 @@ static int cma_req_handler(struct ib_cm_id *cm_id, struct ib_cm_event *ib_event) ret = cma_notify_user(conn_id, RDMA_CM_EVENT_CONNECT_REQUEST, 0, ib_event->private_data + offset, IB_CM_REQ_PRIVATE_DATA_SIZE - offset); - if (ret) { - /* Destroy the CM ID by returning a non-zero value. */ - conn_id->cm_id.ib = NULL; - cma_exch(conn_id, CMA_DESTROYING); - cma_release_remove(conn_id); - rdma_destroy_id(&conn_id->id); - } + if (!ret) + goto out; + + /* Destroy the CM ID by returning a non-zero value. */ + conn_id->cm_id.ib = NULL; + +release_conn_id: + cma_exch(conn_id, CMA_DESTROYING); + cma_release_remove(conn_id); + rdma_destroy_id(&conn_id->id); + out: cma_release_remove(listen_id); return ret; @@ -1481,19 +1480,18 @@ static int cma_bind_loopback(struct rdma_id_private *id_priv) u8 p; mutex_lock(&lock); + if (list_empty(&dev_list)) { + ret = -ENODEV; + goto out; + } list_for_each_entry(cma_dev, &dev_list, list) for (p = 1; p <= cma_dev->device->phys_port_cnt; ++p) - if (!ib_query_port (cma_dev->device, p, &port_attr) && + if (!ib_query_port(cma_dev->device, p, &port_attr) && port_attr.state == IB_PORT_ACTIVE) goto port_found; - if (!list_empty(&dev_list)) { - p = 1; - cma_dev = list_entry(dev_list.next, struct cma_device, list); - } else { - ret = -ENODEV; - goto out; - } + p = 1; + cma_dev = list_entry(dev_list.next, struct cma_device, list); port_found: ret = ib_get_cached_gid(cma_dev->device, p, 0, &gid); @@ -2123,8 +2121,6 @@ static void cma_add_one(struct ib_device *device) cma_dev->device = device; cma_dev->node_guid = device->node_guid; - if (!cma_dev->node_guid) - goto err; init_completion(&cma_dev->comp); atomic_set(&cma_dev->refcount, 1); @@ -2136,9 +2132,6 @@ static void cma_add_one(struct ib_device *device) list_for_each_entry(id_priv, &listen_any_list, list) cma_listen_on_dev(id_priv, cma_dev); mutex_unlock(&lock); - return; -err: - kfree(cma_dev); } static int cma_remove_id_dev(struct rdma_id_private *id_priv) diff --git a/drivers/infiniband/core/iwcm.c b/drivers/infiniband/core/iwcm.c index 9bfa785252d..1039ad57d53 100644 --- a/drivers/infiniband/core/iwcm.c +++ b/drivers/infiniband/core/iwcm.c @@ -80,7 +80,7 @@ struct iwcm_work { * 1) in the event upcall, cm_event_handler(), for a listening cm_id. If * the backlog is exceeded, then no more connection request events will * be processed. cm_event_handler() returns -ENOMEM in this case. Its up - * to the provider to reject the connectino request. + * to the provider to reject the connection request. * 2) in the connection request workqueue handler, cm_conn_req_handler(). * If work elements cannot be allocated for the new connect request cm_id, * then IWCM will call the provider reject method. This is ok since @@ -131,26 +131,25 @@ static int alloc_work_entries(struct iwcm_id_private *cm_id_priv, int count) } /* - * Save private data from incoming connection requests in the - * cm_id_priv so the low level driver doesn't have to. Adjust + * Save private data from incoming connection requests to + * iw_cm_event, so the low level driver doesn't have to. Adjust * the event ptr to point to the local copy. */ -static int copy_private_data(struct iwcm_id_private *cm_id_priv, - struct iw_cm_event *event) +static int copy_private_data(struct iw_cm_event *event) { void *p; - p = kmalloc(event->private_data_len, GFP_ATOMIC); + p = kmemdup(event->private_data, event->private_data_len, GFP_ATOMIC); if (!p) return -ENOMEM; - memcpy(p, event->private_data, event->private_data_len); event->private_data = p; return 0; } /* - * Release a reference on cm_id. If the last reference is being removed - * and iw_destroy_cm_id is waiting, wake up the waiting thread. + * Release a reference on cm_id. If the last reference is being + * released, enable the waiting thread (in iw_destroy_cm_id) to + * get woken up, and return 1 if a thread is already waiting. */ static int iwcm_deref_id(struct iwcm_id_private *cm_id_priv) { @@ -243,7 +242,7 @@ static int iwcm_modify_qp_sqd(struct ib_qp *qp) /* * CM_ID <-- CLOSING * - * Block if a passive or active connection is currenlty being processed. Then + * Block if a passive or active connection is currently being processed. Then * process the event as follows: * - If we are ESTABLISHED, move to CLOSING and modify the QP state * based on the abrupt flag @@ -408,7 +407,7 @@ int iw_cm_listen(struct iw_cm_id *cm_id, int backlog) { struct iwcm_id_private *cm_id_priv; unsigned long flags; - int ret = 0; + int ret; cm_id_priv = container_of(cm_id, struct iwcm_id_private, id); @@ -535,7 +534,7 @@ EXPORT_SYMBOL(iw_cm_accept); int iw_cm_connect(struct iw_cm_id *cm_id, struct iw_cm_conn_param *iw_param) { struct iwcm_id_private *cm_id_priv; - int ret = 0; + int ret; unsigned long flags; struct ib_qp *qp; @@ -620,7 +619,7 @@ static void cm_conn_req_handler(struct iwcm_id_private *listen_id_priv, spin_lock_irqsave(&listen_id_priv->lock, flags); if (listen_id_priv->state != IW_CM_STATE_LISTEN) { spin_unlock_irqrestore(&listen_id_priv->lock, flags); - return; + goto out; } spin_unlock_irqrestore(&listen_id_priv->lock, flags); @@ -629,7 +628,7 @@ static void cm_conn_req_handler(struct iwcm_id_private *listen_id_priv, listen_id_priv->id.context); /* If the cm_id could not be created, ignore the request */ if (IS_ERR(cm_id)) - return; + goto out; cm_id->provider_data = iw_event->provider_data; cm_id->local_addr = iw_event->local_addr; @@ -642,7 +641,7 @@ static void cm_conn_req_handler(struct iwcm_id_private *listen_id_priv, if (ret) { iw_cm_reject(cm_id, NULL, 0); iw_destroy_cm_id(cm_id); - return; + goto out; } /* Call the client CM handler */ @@ -654,6 +653,7 @@ static void cm_conn_req_handler(struct iwcm_id_private *listen_id_priv, kfree(cm_id); } +out: if (iw_event->private_data_len) kfree(iw_event->private_data); } @@ -674,7 +674,7 @@ static int cm_conn_est_handler(struct iwcm_id_private *cm_id_priv, struct iw_cm_event *iw_event) { unsigned long flags; - int ret = 0; + int ret; spin_lock_irqsave(&cm_id_priv->lock, flags); @@ -704,7 +704,7 @@ static int cm_conn_rep_handler(struct iwcm_id_private *cm_id_priv, struct iw_cm_event *iw_event) { unsigned long flags; - int ret = 0; + int ret; spin_lock_irqsave(&cm_id_priv->lock, flags); /* @@ -830,8 +830,8 @@ static int process_event(struct iwcm_id_private *cm_id_priv, */ static void cm_work_handler(struct work_struct *_work) { - struct iwcm_work lwork, *work = - container_of(_work, struct iwcm_work, work); + struct iwcm_work *work = container_of(_work, struct iwcm_work, work); + struct iw_cm_event levent; struct iwcm_id_private *cm_id_priv = work->cm_id; unsigned long flags; int empty; @@ -844,11 +844,11 @@ static void cm_work_handler(struct work_struct *_work) struct iwcm_work, list); list_del_init(&work->list); empty = list_empty(&cm_id_priv->work_list); - lwork = *work; + levent = work->event; put_work(work); spin_unlock_irqrestore(&cm_id_priv->lock, flags); - ret = process_event(cm_id_priv, &work->event); + ret = process_event(cm_id_priv, &levent); if (ret) { set_bit(IWCM_F_CALLBACK_DESTROY, &cm_id_priv->flags); destroy_cm_id(&cm_id_priv->id); @@ -907,7 +907,7 @@ static int cm_event_handler(struct iw_cm_id *cm_id, if ((work->event.event == IW_CM_EVENT_CONNECT_REQUEST || work->event.event == IW_CM_EVENT_CONNECT_REPLY) && work->event.private_data_len) { - ret = copy_private_data(cm_id_priv, &work->event); + ret = copy_private_data(&work->event); if (ret) { put_work(work); goto out; diff --git a/drivers/infiniband/core/mad.c b/drivers/infiniband/core/mad.c index 5a54ac35e96..15f38d94b3a 100644 --- a/drivers/infiniband/core/mad.c +++ b/drivers/infiniband/core/mad.c @@ -46,7 +46,7 @@ MODULE_DESCRIPTION("kernel IB MAD API"); MODULE_AUTHOR("Hal Rosenstock"); MODULE_AUTHOR("Sean Hefty"); -static kmem_cache_t *ib_mad_cache; +static struct kmem_cache *ib_mad_cache; static struct list_head ib_mad_port_list; static u32 ib_mad_client_id = 0; diff --git a/drivers/infiniband/core/ucm.c b/drivers/infiniband/core/ucm.c index ad4f4d5c292..f15220a0ee7 100644 --- a/drivers/infiniband/core/ucm.c +++ b/drivers/infiniband/core/ucm.c @@ -161,12 +161,14 @@ static void ib_ucm_cleanup_events(struct ib_ucm_context *ctx) struct ib_ucm_event, ctx_list); list_del(&uevent->file_list); list_del(&uevent->ctx_list); + mutex_unlock(&ctx->file->file_mutex); /* clear incoming connections. */ if (ib_ucm_new_cm_id(uevent->resp.event)) ib_destroy_cm_id(uevent->cm_id); kfree(uevent); + mutex_lock(&ctx->file->file_mutex); } mutex_unlock(&ctx->file->file_mutex); } @@ -328,20 +330,18 @@ static int ib_ucm_event_process(struct ib_cm_event *evt, } if (uvt->data_len) { - uvt->data = kmalloc(uvt->data_len, GFP_KERNEL); + uvt->data = kmemdup(evt->private_data, uvt->data_len, GFP_KERNEL); if (!uvt->data) goto err1; - memcpy(uvt->data, evt->private_data, uvt->data_len); uvt->resp.present |= IB_UCM_PRES_DATA; } if (uvt->info_len) { - uvt->info = kmalloc(uvt->info_len, GFP_KERNEL); + uvt->info = kmemdup(info, uvt->info_len, GFP_KERNEL); if (!uvt->info) goto err2; - memcpy(uvt->info, info, uvt->info_len); uvt->resp.present |= IB_UCM_PRES_INFO; } return 0; @@ -685,11 +685,11 @@ out: return result; } -static ssize_t ib_ucm_establish(struct ib_ucm_file *file, - const char __user *inbuf, - int in_len, int out_len) +static ssize_t ib_ucm_notify(struct ib_ucm_file *file, + const char __user *inbuf, + int in_len, int out_len) { - struct ib_ucm_establish cmd; + struct ib_ucm_notify cmd; struct ib_ucm_context *ctx; int result; @@ -700,7 +700,7 @@ static ssize_t ib_ucm_establish(struct ib_ucm_file *file, if (IS_ERR(ctx)) return PTR_ERR(ctx); - result = ib_cm_establish(ctx->cm_id); + result = ib_cm_notify(ctx->cm_id, (enum ib_event_type) cmd.event); ib_ucm_ctx_put(ctx); return result; } @@ -1107,7 +1107,7 @@ static ssize_t (*ucm_cmd_table[])(struct ib_ucm_file *file, [IB_USER_CM_CMD_DESTROY_ID] = ib_ucm_destroy_id, [IB_USER_CM_CMD_ATTR_ID] = ib_ucm_attr_id, [IB_USER_CM_CMD_LISTEN] = ib_ucm_listen, - [IB_USER_CM_CMD_ESTABLISH] = ib_ucm_establish, + [IB_USER_CM_CMD_NOTIFY] = ib_ucm_notify, [IB_USER_CM_CMD_SEND_REQ] = ib_ucm_send_req, [IB_USER_CM_CMD_SEND_REP] = ib_ucm_send_rep, [IB_USER_CM_CMD_SEND_RTU] = ib_ucm_send_rtu, diff --git a/drivers/infiniband/hw/amso1100/c2.h b/drivers/infiniband/hw/amso1100/c2.h index 1b17dcdd050..04a9db5de88 100644 --- a/drivers/infiniband/hw/amso1100/c2.h +++ b/drivers/infiniband/hw/amso1100/c2.h @@ -302,7 +302,7 @@ struct c2_dev { unsigned long pa; /* PA device memory */ void **qptr_array; - kmem_cache_t *host_msg_cache; + struct kmem_cache *host_msg_cache; struct list_head cca_link; /* adapter list */ struct list_head eh_wakeup_list; /* event wakeup list */ diff --git a/drivers/infiniband/hw/amso1100/c2_qp.c b/drivers/infiniband/hw/amso1100/c2_qp.c index 5bcf697aa33..179d005ed4a 100644 --- a/drivers/infiniband/hw/amso1100/c2_qp.c +++ b/drivers/infiniband/hw/amso1100/c2_qp.c @@ -564,6 +564,32 @@ int c2_alloc_qp(struct c2_dev *c2dev, return err; } +static inline void c2_lock_cqs(struct c2_cq *send_cq, struct c2_cq *recv_cq) +{ + if (send_cq == recv_cq) + spin_lock_irq(&send_cq->lock); + else if (send_cq > recv_cq) { + spin_lock_irq(&send_cq->lock); + spin_lock_nested(&recv_cq->lock, SINGLE_DEPTH_NESTING); + } else { + spin_lock_irq(&recv_cq->lock); + spin_lock_nested(&send_cq->lock, SINGLE_DEPTH_NESTING); + } +} + +static inline void c2_unlock_cqs(struct c2_cq *send_cq, struct c2_cq *recv_cq) +{ + if (send_cq == recv_cq) + spin_unlock_irq(&send_cq->lock); + else if (send_cq > recv_cq) { + spin_unlock(&recv_cq->lock); + spin_unlock_irq(&send_cq->lock); + } else { + spin_unlock(&send_cq->lock); + spin_unlock_irq(&recv_cq->lock); + } +} + void c2_free_qp(struct c2_dev *c2dev, struct c2_qp *qp) { struct c2_cq *send_cq; @@ -576,15 +602,9 @@ void c2_free_qp(struct c2_dev *c2dev, struct c2_qp *qp) * Lock CQs here, so that CQ polling code can do QP lookup * without taking a lock. */ - spin_lock_irq(&send_cq->lock); - if (send_cq != recv_cq) - spin_lock(&recv_cq->lock); - + c2_lock_cqs(send_cq, recv_cq); c2_free_qpn(c2dev, qp->qpn); - - if (send_cq != recv_cq) - spin_unlock(&recv_cq->lock); - spin_unlock_irq(&send_cq->lock); + c2_unlock_cqs(send_cq, recv_cq); /* * Destory qp in the rnic... diff --git a/drivers/infiniband/hw/amso1100/c2_rnic.c b/drivers/infiniband/hw/amso1100/c2_rnic.c index 623dc95f91d..1687c511cb2 100644 --- a/drivers/infiniband/hw/amso1100/c2_rnic.c +++ b/drivers/infiniband/hw/amso1100/c2_rnic.c @@ -441,7 +441,7 @@ static int c2_rnic_close(struct c2_dev *c2dev) * involves initalizing the various limits and resouce pools that * comprise the RNIC instance. */ -int c2_rnic_init(struct c2_dev *c2dev) +int __devinit c2_rnic_init(struct c2_dev *c2dev) { int err; u32 qsize, msgsize; @@ -611,7 +611,7 @@ int c2_rnic_init(struct c2_dev *c2dev) /* * Called by c2_remove to cleanup the RNIC resources. */ -void c2_rnic_term(struct c2_dev *c2dev) +void __devexit c2_rnic_term(struct c2_dev *c2dev) { /* Close the open adapter instance */ diff --git a/drivers/infiniband/hw/ehca/ehca_main.c b/drivers/infiniband/hw/ehca/ehca_main.c index 01f5aa9cb56..3d1c1c53503 100644 --- a/drivers/infiniband/hw/ehca/ehca_main.c +++ b/drivers/infiniband/hw/ehca/ehca_main.c @@ -52,7 +52,7 @@ MODULE_LICENSE("Dual BSD/GPL"); MODULE_AUTHOR("Christoph Raisch <raisch@de.ibm.com>"); MODULE_DESCRIPTION("IBM eServer HCA InfiniBand Device Driver"); -MODULE_VERSION("SVNEHCA_0018"); +MODULE_VERSION("SVNEHCA_0019"); int ehca_open_aqp1 = 0; int ehca_debug_level = 0; @@ -790,7 +790,7 @@ int __init ehca_module_init(void) int ret; printk(KERN_INFO "eHCA Infiniband Device Driver " - "(Rel.: SVNEHCA_0018)\n"); + "(Rel.: SVNEHCA_0019)\n"); idr_init(&ehca_qp_idr); idr_init(&ehca_cq_idr); spin_lock_init(&ehca_qp_idr_lock); diff --git a/drivers/infiniband/hw/ehca/ehca_qp.c b/drivers/infiniband/hw/ehca/ehca_qp.c index cf3e50ee2d0..8682aa50c70 100644 --- a/drivers/infiniband/hw/ehca/ehca_qp.c +++ b/drivers/infiniband/hw/ehca/ehca_qp.c @@ -732,8 +732,7 @@ static int prepare_sqe_rts(struct ehca_qp *my_qp, struct ehca_shca *shca, u64 h_ret; struct ipz_queue *squeue; void *bad_send_wqe_p, *bad_send_wqe_v; - void *squeue_start_p, *squeue_end_p; - void *squeue_start_v, *squeue_end_v; + u64 q_ofs; struct ehca_wqe *wqe; int qp_num = my_qp->ib_qp.qp_num; @@ -755,26 +754,23 @@ static int prepare_sqe_rts(struct ehca_qp *my_qp, struct ehca_shca *shca, if (ehca_debug_level) ehca_dmp(bad_send_wqe_v, 32, "qp_num=%x bad_wqe", qp_num); squeue = &my_qp->ipz_squeue; - squeue_start_p = (void*)virt_to_abs(ipz_qeit_calc(squeue, 0L)); - squeue_end_p = squeue_start_p+squeue->queue_length; - squeue_start_v = abs_to_virt((u64)squeue_start_p); - squeue_end_v = abs_to_virt((u64)squeue_end_p); - ehca_dbg(&shca->ib_device, "qp_num=%x squeue_start_v=%p squeue_end_v=%p", - qp_num, squeue_start_v, squeue_end_v); + if (ipz_queue_abs_to_offset(squeue, (u64)bad_send_wqe_p, &q_ofs)) { + ehca_err(&shca->ib_device, "failed to get wqe offset qp_num=%x" + " bad_send_wqe_p=%p", qp_num, bad_send_wqe_p); + return -EFAULT; + } /* loop sets wqe's purge bit */ - wqe = (struct ehca_wqe*)bad_send_wqe_v; + wqe = (struct ehca_wqe*)ipz_qeit_calc(squeue, q_ofs); *bad_wqe_cnt = 0; while (wqe->optype != 0xff && wqe->wqef != 0xff) { if (ehca_debug_level) ehca_dmp(wqe, 32, "qp_num=%x wqe", qp_num); wqe->nr_of_data_seg = 0; /* suppress data access */ wqe->wqef = WQEF_PURGE; /* WQE to be purged */ - wqe = (struct ehca_wqe*)((u8*)wqe+squeue->qe_size); + q_ofs = ipz_queue_advance_offset(squeue, q_ofs); + wqe = (struct ehca_wqe*)ipz_qeit_calc(squeue, q_ofs); *bad_wqe_cnt = (*bad_wqe_cnt)+1; - if ((void*)wqe >= squeue_end_v) { - wqe = squeue_start_v; - } } /* * bad wqe will be reprocessed and ignored when pol_cq() is called, diff --git a/drivers/infiniband/hw/ehca/ipz_pt_fn.c b/drivers/infiniband/hw/ehca/ipz_pt_fn.c index e028ff1588c..bf7a40088f6 100644 --- a/drivers/infiniband/hw/ehca/ipz_pt_fn.c +++ b/drivers/infiniband/hw/ehca/ipz_pt_fn.c @@ -70,6 +70,19 @@ void *ipz_qeit_eq_get_inc(struct ipz_queue *queue) return ret; } +int ipz_queue_abs_to_offset(struct ipz_queue *queue, u64 addr, u64 *q_offset) +{ + int i; + for (i = 0; i < queue->queue_length / queue->pagesize; i++) { + u64 page = (u64)virt_to_abs(queue->queue_pages[i]); + if (addr >= page && addr < page + queue->pagesize) { + *q_offset = addr - page + i * queue->pagesize; + return 0; + } + } + return -EINVAL; +} + int ipz_queue_ctor(struct ipz_queue *queue, const u32 nr_of_pages, const u32 pagesize, const u32 qe_size, const u32 nr_of_sg) diff --git a/drivers/infiniband/hw/ehca/ipz_pt_fn.h b/drivers/infiniband/hw/ehca/ipz_pt_fn.h index 2f13509d525..dc3bda2634b 100644 --- a/drivers/infiniband/hw/ehca/ipz_pt_fn.h +++ b/drivers/infiniband/hw/ehca/ipz_pt_fn.h @@ -150,6 +150,21 @@ static inline void *ipz_qeit_reset(struct ipz_queue *queue) return ipz_qeit_get(queue); } +/* + * return the q_offset corresponding to an absolute address + */ +int ipz_queue_abs_to_offset(struct ipz_queue *queue, u64 addr, u64 *q_offset); + +/* + * return the next queue offset. don't modify the queue. + */ +static inline u64 ipz_queue_advance_offset(struct ipz_queue *queue, u64 offset) +{ + offset += queue->qe_size; + if (offset >= queue->queue_length) offset = 0; + return offset; +} + /* struct generic page table */ struct ipz_pt { u64 entries[EHCA_PT_ENTRIES]; diff --git a/drivers/infiniband/hw/ipath/ipath_verbs.c b/drivers/infiniband/hw/ipath/ipath_verbs.c index a5456108dba..acdee33ee1f 100644 --- a/drivers/infiniband/hw/ipath/ipath_verbs.c +++ b/drivers/infiniband/hw/ipath/ipath_verbs.c @@ -1487,7 +1487,7 @@ int ipath_register_ib_device(struct ipath_devdata *dd) idev->pma_counter_select[1] = IB_PMA_PORT_RCV_DATA; idev->pma_counter_select[2] = IB_PMA_PORT_XMIT_PKTS; idev->pma_counter_select[3] = IB_PMA_PORT_RCV_PKTS; - idev->pma_counter_select[5] = IB_PMA_PORT_XMIT_WAIT; + idev->pma_counter_select[4] = IB_PMA_PORT_XMIT_WAIT; idev->link_width_enabled = 3; /* 1x or 4x */ /* Snapshot current HW counters to "clear" them. */ diff --git a/drivers/infiniband/hw/mthca/mthca_av.c b/drivers/infiniband/hw/mthca/mthca_av.c index 69599455aca..57cdc1bc5f5 100644 --- a/drivers/infiniband/hw/mthca/mthca_av.c +++ b/drivers/infiniband/hw/mthca/mthca_av.c @@ -33,7 +33,6 @@ * $Id: mthca_av.c 1349 2004-12-16 21:09:43Z roland $ */ -#include <linux/init.h> #include <linux/string.h> #include <linux/slab.h> @@ -323,7 +322,7 @@ int mthca_ah_query(struct ib_ah *ibah, struct ib_ah_attr *attr) return 0; } -int __devinit mthca_init_av_table(struct mthca_dev *dev) +int mthca_init_av_table(struct mthca_dev *dev) { int err; diff --git a/drivers/infiniband/hw/mthca/mthca_cq.c b/drivers/infiniband/hw/mthca/mthca_cq.c index 149b3690123..283d50b76c3 100644 --- a/drivers/infiniband/hw/mthca/mthca_cq.c +++ b/drivers/infiniband/hw/mthca/mthca_cq.c @@ -36,7 +36,6 @@ * $Id: mthca_cq.c 1369 2004-12-20 16:17:07Z roland $ */ -#include <linux/init.h> #include <linux/hardirq.h> #include <asm/io.h> @@ -970,7 +969,7 @@ void mthca_free_cq(struct mthca_dev *dev, mthca_free_mailbox(dev, mailbox); } -int __devinit mthca_init_cq_table(struct mthca_dev *dev) +int mthca_init_cq_table(struct mthca_dev *dev) { int err; diff --git a/drivers/infiniband/hw/mthca/mthca_eq.c b/drivers/infiniband/hw/mthca/mthca_eq.c index e284e0613a9..8ec9fa1ff9e 100644 --- a/drivers/infiniband/hw/mthca/mthca_eq.c +++ b/drivers/infiniband/hw/mthca/mthca_eq.c @@ -33,7 +33,6 @@ * $Id: mthca_eq.c 1382 2004-12-24 02:21:02Z roland $ */ -#include <linux/init.h> #include <linux/errno.h> #include <linux/interrupt.h> #include <linux/pci.h> @@ -479,10 +478,10 @@ static irqreturn_t mthca_arbel_msi_x_interrupt(int irq, void *eq_ptr) return IRQ_HANDLED; } -static int __devinit mthca_create_eq(struct mthca_dev *dev, - int nent, - u8 intr, - struct mthca_eq *eq) +static int mthca_create_eq(struct mthca_dev *dev, + int nent, + u8 intr, + struct mthca_eq *eq) { int npages; u64 *dma_list = NULL; @@ -664,9 +663,9 @@ static void mthca_free_irqs(struct mthca_dev *dev) dev->eq_table.eq + i); } -static int __devinit mthca_map_reg(struct mthca_dev *dev, - unsigned long offset, unsigned long size, - void __iomem **map) +static int mthca_map_reg(struct mthca_dev *dev, + unsigned long offset, unsigned long size, + void __iomem **map) { unsigned long base = pci_resource_start(dev->pdev, 0); @@ -691,7 +690,7 @@ static void mthca_unmap_reg(struct mthca_dev *dev, unsigned long offset, iounmap(map); } -static int __devinit mthca_map_eq_regs(struct mthca_dev *dev) +static int mthca_map_eq_regs(struct mthca_dev *dev) { if (mthca_is_memfree(dev)) { /* @@ -781,7 +780,7 @@ static void mthca_unmap_eq_regs(struct mthca_dev *dev) } } -int __devinit mthca_map_eq_icm(struct mthca_dev *dev, u64 icm_virt) +int mthca_map_eq_icm(struct mthca_dev *dev, u64 icm_virt) { int ret; u8 status; @@ -825,7 +824,7 @@ void mthca_unmap_eq_icm(struct mthca_dev *dev) __free_page(dev->eq_table.icm_page); } -int __devinit mthca_init_eq_table(struct mthca_dev *dev) +int mthca_init_eq_table(struct mthca_dev *dev) { int err; u8 status; diff --git a/drivers/infiniband/hw/mthca/mthca_mad.c b/drivers/infiniband/hw/mthca/mthca_mad.c index 45e106f1480..acfa41d968e 100644 --- a/drivers/infiniband/hw/mthca/mthca_mad.c +++ b/drivers/infiniband/hw/mthca/mthca_mad.c @@ -317,7 +317,7 @@ err: return ret; } -void __devexit mthca_free_agents(struct mthca_dev *dev) +void mthca_free_agents(struct mthca_dev *dev) { struct ib_mad_agent *agent; int p, q; diff --git a/drivers/infiniband/hw/mthca/mthca_main.c b/drivers/infiniband/hw/mthca/mthca_main.c index 47ea0214836..0491ec7a7c0 100644 --- a/drivers/infiniband/hw/mthca/mthca_main.c +++ b/drivers/infiniband/hw/mthca/mthca_main.c @@ -98,7 +98,7 @@ static struct mthca_profile default_profile = { .uarc_size = 1 << 18, /* Arbel only */ }; -static int __devinit mthca_tune_pci(struct mthca_dev *mdev) +static int mthca_tune_pci(struct mthca_dev *mdev) { int cap; u16 val; @@ -143,7 +143,7 @@ static int __devinit mthca_tune_pci(struct mthca_dev *mdev) return 0; } -static int __devinit mthca_dev_lim(struct mthca_dev *mdev, struct mthca_dev_lim *dev_lim) +static int mthca_dev_lim(struct mthca_dev *mdev, struct mthca_dev_lim *dev_lim) { int err; u8 status; @@ -255,7 +255,7 @@ static int __devinit mthca_dev_lim(struct mthca_dev *mdev, struct mthca_dev_lim return 0; } -static int __devinit mthca_init_tavor(struct mthca_dev *mdev) +static int mthca_init_tavor(struct mthca_dev *mdev) { u8 status; int err; @@ -333,7 +333,7 @@ err_disable: return err; } -static int __devinit mthca_load_fw(struct mthca_dev *mdev) +static int mthca_load_fw(struct mthca_dev *mdev) { u8 status; int err; @@ -379,10 +379,10 @@ err_free: return err; } -static int __devinit mthca_init_icm(struct mthca_dev *mdev, - struct mthca_dev_lim *dev_lim, - struct mthca_init_hca_param *init_hca, - u64 icm_size) +static int mthca_init_icm(struct mthca_dev *mdev, + struct mthca_dev_lim *dev_lim, + struct mthca_init_hca_param *init_hca, + u64 icm_size) { u64 aux_pages; u8 status; @@ -575,7 +575,7 @@ static void mthca_free_icms(struct mthca_dev *mdev) mthca_free_icm(mdev, mdev->fw.arbel.aux_icm); } -static int __devinit mthca_init_arbel(struct mthca_dev *mdev) +static int mthca_init_arbel(struct mthca_dev *mdev) { struct mthca_dev_lim dev_lim; struct mthca_profile profile; @@ -683,7 +683,7 @@ static void mthca_close_hca(struct mthca_dev *mdev) mthca_SYS_DIS(mdev, &status); } -static int __devinit mthca_init_hca(struct mthca_dev *mdev) +static int mthca_init_hca(struct mthca_dev *mdev) { u8 status; int err; @@ -720,7 +720,7 @@ err_close: return err; } -static int __devinit mthca_setup_hca(struct mthca_dev *dev) +static int mthca_setup_hca(struct mthca_dev *dev) { int err; u8 status; @@ -875,8 +875,7 @@ err_uar_table_free: return err; } -static int __devinit mthca_request_regions(struct pci_dev *pdev, - int ddr_hidden) +static int mthca_request_regions(struct pci_dev *pdev, int ddr_hidden) { int err; @@ -928,7 +927,7 @@ static void mthca_release_regions(struct pci_dev *pdev, MTHCA_HCR_SIZE); } -static int __devinit mthca_enable_msi_x(struct mthca_dev *mdev) +static int mthca_enable_msi_x(struct mthca_dev *mdev) { struct msix_entry entries[3]; int err; @@ -1213,7 +1212,7 @@ int __mthca_restart_one(struct pci_dev *pdev) } static int __devinit mthca_init_one(struct pci_dev *pdev, - const struct pci_device_id *id) + const struct pci_device_id *id) { static int mthca_version_printed = 0; int ret; diff --git a/drivers/infiniband/hw/mthca/mthca_mcg.c b/drivers/infiniband/hw/mthca/mthca_mcg.c index 47ca8a9b724..a8ad072be07 100644 --- a/drivers/infiniband/hw/mthca/mthca_mcg.c +++ b/drivers/infiniband/hw/mthca/mthca_mcg.c @@ -32,7 +32,6 @@ * $Id: mthca_mcg.c 1349 2004-12-16 21:09:43Z roland $ */ -#include <linux/init.h> #include <linux/string.h> #include <linux/slab.h> @@ -371,7 +370,7 @@ int mthca_multicast_detach(struct ib_qp *ibqp, union ib_gid *gid, u16 lid) return err; } -int __devinit mthca_init_mcg_table(struct mthca_dev *dev) +int mthca_init_mcg_table(struct mthca_dev *dev) { int err; int table_size = dev->limits.num_mgms + dev->limits.num_amgms; diff --git a/drivers/infiniband/hw/mthca/mthca_mr.c b/drivers/infiniband/hw/mthca/mthca_mr.c index a486dec1707..f71ffa88db3 100644 --- a/drivers/infiniband/hw/mthca/mthca_mr.c +++ b/drivers/infiniband/hw/mthca/mthca_mr.c @@ -34,7 +34,6 @@ */ #include <linux/slab.h> -#include <linux/init.h> #include <linux/errno.h> #include "mthca_dev.h" @@ -135,7 +134,7 @@ static void mthca_buddy_free(struct mthca_buddy *buddy, u32 seg, int order) spin_unlock(&buddy->lock); } -static int __devinit mthca_buddy_init(struct mthca_buddy *buddy, int max_order) +static int mthca_buddy_init(struct mthca_buddy *buddy, int max_order) { int i, s; @@ -759,7 +758,7 @@ void mthca_arbel_fmr_unmap(struct mthca_dev *dev, struct mthca_fmr *fmr) *(u8 *) fmr->mem.arbel.mpt = MTHCA_MPT_STATUS_SW; } -int __devinit mthca_init_mr_table(struct mthca_dev *dev) +int mthca_init_mr_table(struct mthca_dev *dev) { unsigned long addr; int err, i; diff --git a/drivers/infiniband/hw/mthca/mthca_pd.c b/drivers/infiniband/hw/mthca/mthca_pd.c index 59df51614c8..c1e950764bd 100644 --- a/drivers/infiniband/hw/mthca/mthca_pd.c +++ b/drivers/infiniband/hw/mthca/mthca_pd.c @@ -34,7 +34,6 @@ * $Id: mthca_pd.c 1349 2004-12-16 21:09:43Z roland $ */ -#include <linux/init.h> #include <linux/errno.h> #include "mthca_dev.h" @@ -69,7 +68,7 @@ void mthca_pd_free(struct mthca_dev *dev, struct mthca_pd *pd) mthca_free(&dev->pd_table.alloc, pd->pd_num); } -int __devinit mthca_init_pd_table(struct mthca_dev *dev) +int mthca_init_pd_table(struct mthca_dev *dev) { return mthca_alloc_init(&dev->pd_table.alloc, dev->limits.num_pds, diff --git a/drivers/infiniband/hw/mthca/mthca_provider.c b/drivers/infiniband/hw/mthca/mthca_provider.c index fc67f780581..21422a3336a 100644 --- a/drivers/infiniband/hw/mthca/mthca_provider.c +++ b/drivers/infiniband/hw/mthca/mthca_provider.c @@ -1100,11 +1100,10 @@ static struct ib_fmr *mthca_alloc_fmr(struct ib_pd *pd, int mr_access_flags, struct mthca_fmr *fmr; int err; - fmr = kmalloc(sizeof *fmr, GFP_KERNEL); + fmr = kmemdup(fmr_attr, sizeof *fmr, GFP_KERNEL); if (!fmr) return ERR_PTR(-ENOMEM); - memcpy(&fmr->attr, fmr_attr, sizeof *fmr_attr); err = mthca_fmr_alloc(to_mdev(pd->device), to_mpd(pd)->pd_num, convert_access(mr_access_flags), fmr); diff --git a/drivers/infiniband/hw/mthca/mthca_qp.c b/drivers/infiniband/hw/mthca/mthca_qp.c index 6a7822e0fc1..33e3ba7937f 100644 --- a/drivers/infiniband/hw/mthca/mthca_qp.c +++ b/drivers/infiniband/hw/mthca/mthca_qp.c @@ -35,7 +35,6 @@ * $Id: mthca_qp.c 1355 2004-12-17 15:23:43Z roland $ */ -#include <linux/init.h> #include <linux/string.h> #include <linux/slab.h> @@ -2241,7 +2240,7 @@ void mthca_free_err_wqe(struct mthca_dev *dev, struct mthca_qp *qp, int is_send, *new_wqe = 0; } -int __devinit mthca_init_qp_table(struct mthca_dev *dev) +int mthca_init_qp_table(struct mthca_dev *dev) { int err; u8 status; diff --git a/drivers/infiniband/hw/mthca/mthca_srq.c b/drivers/infiniband/hw/mthca/mthca_srq.c index f5d7677d107..34d2c476896 100644 --- a/drivers/infiniband/hw/mthca/mthca_srq.c +++ b/drivers/infiniband/hw/mthca/mthca_srq.c @@ -120,7 +120,7 @@ static void mthca_arbel_init_srq_context(struct mthca_dev *dev, memset(context, 0, sizeof *context); - logsize = long_log2(srq->max) + srq->wqe_shift; + logsize = long_log2(srq->max); context->state_logsize_srqn = cpu_to_be32(logsize << 24 | srq->srqn); context->lkey = cpu_to_be32(srq->mr.ibmr.lkey); context->db_index = cpu_to_be32(srq->db_index); @@ -715,7 +715,7 @@ int mthca_max_srq_sge(struct mthca_dev *dev) sizeof (struct mthca_data_seg)); } -int __devinit mthca_init_srq_table(struct mthca_dev *dev) +int mthca_init_srq_table(struct mthca_dev *dev) { int err; diff --git a/drivers/infiniband/ulp/ipoib/ipoib.h b/drivers/infiniband/ulp/ipoib/ipoib.h index 3b2ee0eba05..99547996aba 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib.h +++ b/drivers/infiniband/ulp/ipoib/ipoib.h @@ -233,7 +233,7 @@ static inline struct ipoib_neigh **to_ipoib_neigh(struct neighbour *neigh) } struct ipoib_neigh *ipoib_neigh_alloc(struct neighbour *neigh); -void ipoib_neigh_free(struct ipoib_neigh *neigh); +void ipoib_neigh_free(struct net_device *dev, struct ipoib_neigh *neigh); extern struct workqueue_struct *ipoib_workqueue; diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c index 71114a8c12b..c0928024372 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_main.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c @@ -264,7 +264,7 @@ static void path_free(struct net_device *dev, struct ipoib_path *path) if (neigh->ah) ipoib_put_ah(neigh->ah); - ipoib_neigh_free(neigh); + ipoib_neigh_free(dev, neigh); } spin_unlock_irqrestore(&priv->lock, flags); @@ -525,10 +525,11 @@ static void neigh_add_path(struct sk_buff *skb, struct net_device *dev) ipoib_send(dev, skb, path->ah, IPOIB_QPN(skb->dst->neighbour->ha)); } else { neigh->ah = NULL; - __skb_queue_tail(&neigh->queue, skb); if (!path->query && path_rec_start(dev, path)) goto err_list; + + __skb_queue_tail(&neigh->queue, skb); } spin_unlock(&priv->lock); @@ -538,7 +539,7 @@ err_list: list_del(&neigh->list); err_path: - ipoib_neigh_free(neigh); + ipoib_neigh_free(dev, neigh); ++priv->stats.tx_dropped; dev_kfree_skb_any(skb); @@ -655,7 +656,7 @@ static int ipoib_start_xmit(struct sk_buff *skb, struct net_device *dev) */ ipoib_put_ah(neigh->ah); list_del(&neigh->list); - ipoib_neigh_free(neigh); + ipoib_neigh_free(dev, neigh); spin_unlock(&priv->lock); ipoib_path_lookup(skb, dev); goto out; @@ -786,7 +787,7 @@ static void ipoib_neigh_destructor(struct neighbour *n) if (neigh->ah) ah = neigh->ah; list_del(&neigh->list); - ipoib_neigh_free(neigh); + ipoib_neigh_free(n->dev, neigh); } spin_unlock_irqrestore(&priv->lock, flags); @@ -809,9 +810,15 @@ struct ipoib_neigh *ipoib_neigh_alloc(struct neighbour *neighbour) return neigh; } -void ipoib_neigh_free(struct ipoib_neigh *neigh) +void ipoib_neigh_free(struct net_device *dev, struct ipoib_neigh *neigh) { + struct ipoib_dev_priv *priv = netdev_priv(dev); + struct sk_buff *skb; *to_ipoib_neigh(neigh->neighbour) = NULL; + while ((skb = __skb_dequeue(&neigh->queue))) { + ++priv->stats.tx_dropped; + dev_kfree_skb_any(skb); + } kfree(neigh); } diff --git a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c index f0a4fac1a21..b04b72ca32e 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c @@ -114,7 +114,7 @@ static void ipoib_mcast_free(struct ipoib_mcast *mcast) */ if (neigh->ah) ipoib_put_ah(neigh->ah); - ipoib_neigh_free(neigh); + ipoib_neigh_free(dev, neigh); } spin_unlock_irqrestore(&priv->lock, flags); diff --git a/drivers/infiniband/ulp/iser/iscsi_iser.h b/drivers/infiniband/ulp/iser/iscsi_iser.h index 9c53916f28c..234e5b061a7 100644 --- a/drivers/infiniband/ulp/iser/iscsi_iser.h +++ b/drivers/infiniband/ulp/iser/iscsi_iser.h @@ -283,7 +283,7 @@ struct iser_global { struct mutex connlist_mutex; struct list_head connlist; /* all iSER IB connections */ - kmem_cache_t *desc_cache; + struct kmem_cache *desc_cache; }; extern struct iser_global ig; diff --git a/drivers/infiniband/ulp/srp/ib_srp.c b/drivers/infiniband/ulp/srp/ib_srp.c index 214f66195af..a6289595557 100644 --- a/drivers/infiniband/ulp/srp/ib_srp.c +++ b/drivers/infiniband/ulp/srp/ib_srp.c @@ -1177,9 +1177,11 @@ static int srp_cm_handler(struct ib_cm_id *cm_id, struct ib_cm_event *event) break; } - target->status = srp_alloc_iu_bufs(target); - if (target->status) - break; + if (!target->rx_ring[0]) { + target->status = srp_alloc_iu_bufs(target); + if (target->status) + break; + } qp_attr = kmalloc(sizeof *qp_attr, GFP_KERNEL); if (!qp_attr) { @@ -1717,7 +1719,8 @@ static ssize_t srp_create_target(struct class_device *class_dev, if (!target_host) return -ENOMEM; - target_host->max_lun = SRP_MAX_LUN; + target_host->max_lun = SRP_MAX_LUN; + target_host->max_cmd_len = sizeof ((struct srp_cmd *) (void *) 0L)->cdb; target = host_to_target(target_host); diff --git a/drivers/input/joystick/iforce/iforce-usb.c b/drivers/input/joystick/iforce/iforce-usb.c index 105112fb7b5..80cdebcbcb9 100644 --- a/drivers/input/joystick/iforce/iforce-usb.c +++ b/drivers/input/joystick/iforce/iforce-usb.c @@ -178,9 +178,9 @@ static int iforce_usb_probe(struct usb_interface *intf, fail: if (iforce) { - if (iforce->irq) usb_free_urb(iforce->irq); - if (iforce->out) usb_free_urb(iforce->out); - if (iforce->ctrl) usb_free_urb(iforce->ctrl); + usb_free_urb(iforce->irq); + usb_free_urb(iforce->out); + usb_free_urb(iforce->ctrl); kfree(iforce); } diff --git a/drivers/input/serio/serio_raw.c b/drivers/input/serio/serio_raw.c index ba2a2035d64..7c8d0399ae8 100644 --- a/drivers/input/serio/serio_raw.c +++ b/drivers/input/serio/serio_raw.c @@ -297,7 +297,7 @@ static int serio_raw_connect(struct serio *serio, struct serio_driver *drv) serio_raw->dev.minor = PSMOUSE_MINOR; serio_raw->dev.name = serio_raw->name; - serio_raw->dev.dev = &serio->dev; + serio_raw->dev.parent = &serio->dev; serio_raw->dev.fops = &serio_raw_fops; err = misc_register(&serio_raw->dev); diff --git a/drivers/isdn/gigaset/common.c b/drivers/isdn/gigaset/common.c index 5800beeebb8..defd5743dba 100644 --- a/drivers/isdn/gigaset/common.c +++ b/drivers/isdn/gigaset/common.c @@ -702,7 +702,7 @@ struct cardstate *gigaset_initcs(struct gigaset_driver *drv, int channels, cs->open_count = 0; cs->dev = NULL; cs->tty = NULL; - cs->class = NULL; + cs->tty_dev = NULL; cs->cidmode = cidmode != 0; //if(onechannel) { //FIXME diff --git a/drivers/isdn/gigaset/gigaset.h b/drivers/isdn/gigaset/gigaset.h index 884bd72c1bf..06298cc52bf 100644 --- a/drivers/isdn/gigaset/gigaset.h +++ b/drivers/isdn/gigaset/gigaset.h @@ -444,7 +444,7 @@ struct cardstate { struct gigaset_driver *driver; unsigned minor_index; struct device *dev; - struct class_device *class; + struct device *tty_dev; const struct gigaset_ops *ops; diff --git a/drivers/isdn/gigaset/interface.c b/drivers/isdn/gigaset/interface.c index 596f3aebe2f..7edea015867 100644 --- a/drivers/isdn/gigaset/interface.c +++ b/drivers/isdn/gigaset/interface.c @@ -625,13 +625,13 @@ void gigaset_if_init(struct cardstate *cs) return; tasklet_init(&cs->if_wake_tasklet, &if_wake, (unsigned long) cs); - cs->class = tty_register_device(drv->tty, cs->minor_index, NULL); + cs->tty_dev = tty_register_device(drv->tty, cs->minor_index, NULL); - if (!IS_ERR(cs->class)) - class_set_devdata(cs->class, cs); + if (!IS_ERR(cs->tty_dev)) + dev_set_drvdata(cs->tty_dev, cs); else { warn("could not register device to the tty subsystem"); - cs->class = NULL; + cs->tty_dev = NULL; } } @@ -645,7 +645,7 @@ void gigaset_if_free(struct cardstate *cs) tasklet_disable(&cs->if_wake_tasklet); tasklet_kill(&cs->if_wake_tasklet); - cs->class = NULL; + cs->tty_dev = NULL; tty_unregister_device(drv->tty, cs->minor_index); } diff --git a/drivers/isdn/gigaset/proc.c b/drivers/isdn/gigaset/proc.c index 9ad840e95db..e767afa55ab 100644 --- a/drivers/isdn/gigaset/proc.c +++ b/drivers/isdn/gigaset/proc.c @@ -16,11 +16,12 @@ #include "gigaset.h" #include <linux/ctype.h> -static ssize_t show_cidmode(struct class_device *class, char *buf) +static ssize_t show_cidmode(struct device *dev, + struct device_attribute *attr, char *buf) { int ret; unsigned long flags; - struct cardstate *cs = class_get_devdata(class); + struct cardstate *cs = dev_get_drvdata(dev); spin_lock_irqsave(&cs->lock, flags); ret = sprintf(buf, "%u\n", cs->cidmode); @@ -29,10 +30,10 @@ static ssize_t show_cidmode(struct class_device *class, char *buf) return ret; } -static ssize_t set_cidmode(struct class_device *class, +static ssize_t set_cidmode(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { - struct cardstate *cs = class_get_devdata(class); + struct cardstate *cs = dev_get_drvdata(dev); long int value; char *end; @@ -64,25 +65,25 @@ static ssize_t set_cidmode(struct class_device *class, return count; } -static CLASS_DEVICE_ATTR(cidmode, S_IRUGO|S_IWUSR, show_cidmode, set_cidmode); +static DEVICE_ATTR(cidmode, S_IRUGO|S_IWUSR, show_cidmode, set_cidmode); /* free sysfs for device */ void gigaset_free_dev_sysfs(struct cardstate *cs) { - if (!cs->class) + if (!cs->tty_dev) return; gig_dbg(DEBUG_INIT, "removing sysfs entries"); - class_device_remove_file(cs->class, &class_device_attr_cidmode); + device_remove_file(cs->tty_dev, &dev_attr_cidmode); } /* initialize sysfs for device */ void gigaset_init_dev_sysfs(struct cardstate *cs) { - if (!cs->class) + if (!cs->tty_dev) return; gig_dbg(DEBUG_INIT, "setting up sysfs"); - if (class_device_create_file(cs->class, &class_device_attr_cidmode)) + if (device_create_file(cs->tty_dev, &dev_attr_cidmode)) dev_err(cs->dev, "could not create sysfs attribute\n"); } diff --git a/drivers/isdn/gigaset/usb-gigaset.c b/drivers/isdn/gigaset/usb-gigaset.c index 4ffa9eb1c28..5ebf49ac9b2 100644 --- a/drivers/isdn/gigaset/usb-gigaset.c +++ b/drivers/isdn/gigaset/usb-gigaset.c @@ -815,14 +815,11 @@ static int gigaset_probe(struct usb_interface *interface, return 0; error: - if (ucs->read_urb) - usb_kill_urb(ucs->read_urb); + usb_kill_urb(ucs->read_urb); kfree(ucs->bulk_out_buffer); - if (ucs->bulk_out_urb != NULL) - usb_free_urb(ucs->bulk_out_urb); + usb_free_urb(ucs->bulk_out_urb); kfree(cs->inbuf[0].rcvbuf); - if (ucs->read_urb != NULL) - usb_free_urb(ucs->read_urb); + usb_free_urb(ucs->read_urb); usb_set_intfdata(interface, NULL); ucs->read_urb = ucs->bulk_out_urb = NULL; cs->inbuf[0].rcvbuf = ucs->bulk_out_buffer = NULL; @@ -850,11 +847,9 @@ static void gigaset_disconnect(struct usb_interface *interface) usb_kill_urb(ucs->bulk_out_urb); /* FIXME: only if active? */ kfree(ucs->bulk_out_buffer); - if (ucs->bulk_out_urb != NULL) - usb_free_urb(ucs->bulk_out_urb); + usb_free_urb(ucs->bulk_out_urb); kfree(cs->inbuf[0].rcvbuf); - if (ucs->read_urb != NULL) - usb_free_urb(ucs->read_urb); + usb_free_urb(ucs->read_urb); ucs->read_urb = ucs->bulk_out_urb = NULL; cs->inbuf[0].rcvbuf = ucs->bulk_out_buffer = NULL; diff --git a/drivers/isdn/hardware/eicon/os_4bri.c b/drivers/isdn/hardware/eicon/os_4bri.c index 11e6f937c1e..7b4ec3f60db 100644 --- a/drivers/isdn/hardware/eicon/os_4bri.c +++ b/drivers/isdn/hardware/eicon/os_4bri.c @@ -464,7 +464,7 @@ int diva_4bri_init_card(diva_os_xdi_adapter_t * a) /* ** Cleanup function will be called for master adapter only -** this is garanteed by design: cleanup callback is set +** this is guaranteed by design: cleanup callback is set ** by master adapter only */ static int diva_4bri_cleanup_adapter(diva_os_xdi_adapter_t * a) diff --git a/drivers/isdn/hisax/hfc4s8s_l1.h b/drivers/isdn/hisax/hfc4s8s_l1.h index e8f9c077fa8..9d5d2a56b4e 100644 --- a/drivers/isdn/hisax/hfc4s8s_l1.h +++ b/drivers/isdn/hisax/hfc4s8s_l1.h @@ -16,7 +16,7 @@ /* * include Genero generated HFC-4S/8S header file hfc48scu.h -* for comlete register description. This will define _HFC48SCU_H_ +* for complete register description. This will define _HFC48SCU_H_ * to prevent redefinitions */ diff --git a/drivers/isdn/hisax/isdnl2.c b/drivers/isdn/hisax/isdnl2.c index 6d043172555..cd3b5ad5349 100644 --- a/drivers/isdn/hisax/isdnl2.c +++ b/drivers/isdn/hisax/isdnl2.c @@ -1442,7 +1442,7 @@ l2_tei_remove(struct FsmInst *fi, int event, void *arg) } static void -l2_st14_persistant_da(struct FsmInst *fi, int event, void *arg) +l2_st14_persistent_da(struct FsmInst *fi, int event, void *arg) { struct PStack *st = fi->userdata; @@ -1453,7 +1453,7 @@ l2_st14_persistant_da(struct FsmInst *fi, int event, void *arg) } static void -l2_st5_persistant_da(struct FsmInst *fi, int event, void *arg) +l2_st5_persistent_da(struct FsmInst *fi, int event, void *arg) { struct PStack *st = fi->userdata; @@ -1466,7 +1466,7 @@ l2_st5_persistant_da(struct FsmInst *fi, int event, void *arg) } static void -l2_st6_persistant_da(struct FsmInst *fi, int event, void *arg) +l2_st6_persistent_da(struct FsmInst *fi, int event, void *arg) { struct PStack *st = fi->userdata; @@ -1477,7 +1477,7 @@ l2_st6_persistant_da(struct FsmInst *fi, int event, void *arg) } static void -l2_persistant_da(struct FsmInst *fi, int event, void *arg) +l2_persistent_da(struct FsmInst *fi, int event, void *arg) { struct PStack *st = fi->userdata; @@ -1612,14 +1612,14 @@ static struct FsmNode L2FnList[] __initdata = {ST_L2_6, EV_L2_FRAME_ERROR, l2_frame_error}, {ST_L2_7, EV_L2_FRAME_ERROR, l2_frame_error_reest}, {ST_L2_8, EV_L2_FRAME_ERROR, l2_frame_error_reest}, - {ST_L2_1, EV_L1_DEACTIVATE, l2_st14_persistant_da}, + {ST_L2_1, EV_L1_DEACTIVATE, l2_st14_persistent_da}, {ST_L2_2, EV_L1_DEACTIVATE, l2_st24_tei_remove}, {ST_L2_3, EV_L1_DEACTIVATE, l2_st3_tei_remove}, - {ST_L2_4, EV_L1_DEACTIVATE, l2_st14_persistant_da}, - {ST_L2_5, EV_L1_DEACTIVATE, l2_st5_persistant_da}, - {ST_L2_6, EV_L1_DEACTIVATE, l2_st6_persistant_da}, - {ST_L2_7, EV_L1_DEACTIVATE, l2_persistant_da}, - {ST_L2_8, EV_L1_DEACTIVATE, l2_persistant_da}, + {ST_L2_4, EV_L1_DEACTIVATE, l2_st14_persistent_da}, + {ST_L2_5, EV_L1_DEACTIVATE, l2_st5_persistent_da}, + {ST_L2_6, EV_L1_DEACTIVATE, l2_st6_persistent_da}, + {ST_L2_7, EV_L1_DEACTIVATE, l2_persistent_da}, + {ST_L2_8, EV_L1_DEACTIVATE, l2_persistent_da}, }; #define L2_FN_COUNT (sizeof(L2FnList)/sizeof(struct FsmNode)) diff --git a/drivers/media/dvb/cinergyT2/cinergyT2.c b/drivers/media/dvb/cinergyT2/cinergyT2.c index dd0bcbe140b..8458ff3f351 100644 --- a/drivers/media/dvb/cinergyT2/cinergyT2.c +++ b/drivers/media/dvb/cinergyT2/cinergyT2.c @@ -275,8 +275,7 @@ static void cinergyt2_free_stream_urbs (struct cinergyt2 *cinergyt2) int i; for (i=0; i<STREAM_URB_COUNT; i++) - if (cinergyt2->stream_urb[i]) - usb_free_urb(cinergyt2->stream_urb[i]); + usb_free_urb(cinergyt2->stream_urb[i]); usb_buffer_free(cinergyt2->udev, STREAM_URB_COUNT*STREAM_BUF_SIZE, cinergyt2->streambuf, cinergyt2->streambuf_dmahandle); @@ -320,8 +319,7 @@ static void cinergyt2_stop_stream_xfer (struct cinergyt2 *cinergyt2) cinergyt2_control_stream_transfer(cinergyt2, 0); for (i=0; i<STREAM_URB_COUNT; i++) - if (cinergyt2->stream_urb[i]) - usb_kill_urb(cinergyt2->stream_urb[i]); + usb_kill_urb(cinergyt2->stream_urb[i]); } static int cinergyt2_start_stream_xfer (struct cinergyt2 *cinergyt2) diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c index 53304e6991a..a2ab2eebfc6 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.c +++ b/drivers/media/dvb/dvb-core/dvb_frontend.c @@ -348,7 +348,7 @@ static int dvb_frontend_swzigzag_autotune(struct dvb_frontend *fe, int check_wra static void dvb_frontend_swzigzag(struct dvb_frontend *fe) { - fe_status_t s; + fe_status_t s = 0; struct dvb_frontend_private *fepriv = fe->frontend_priv; /* if we've got no parameters, just keep idling */ diff --git a/drivers/media/dvb/frontends/tda10086.c b/drivers/media/dvb/frontends/tda10086.c index 7456b0b9976..4c27a2d90a3 100644 --- a/drivers/media/dvb/frontends/tda10086.c +++ b/drivers/media/dvb/frontends/tda10086.c @@ -441,6 +441,10 @@ static int tda10086_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_pa dprintk ("%s\n", __FUNCTION__); + // check for invalid symbol rate + if (fe_params->u.qpsk.symbol_rate < 500000) + return -EINVAL; + // calculate the updated frequency (note: we convert from Hz->kHz) tmp64 = tda10086_read_byte(state, 0x52); tmp64 |= (tda10086_read_byte(state, 0x51) << 8); diff --git a/drivers/media/dvb/ttpci/budget-patch.c b/drivers/media/dvb/ttpci/budget-patch.c index fc1267b8c89..9a155396d6a 100644 --- a/drivers/media/dvb/ttpci/budget-patch.c +++ b/drivers/media/dvb/ttpci/budget-patch.c @@ -500,14 +500,14 @@ static int budget_patch_attach (struct saa7146_dev* dev, struct saa7146_pci_exte /* New design (By Emard) ** this rps1 code will copy internal HS event to GPIO3 pin. -** GPIO3 is in budget-patch hardware connectd to port B VSYNC +** GPIO3 is in budget-patch hardware connected to port B VSYNC ** HS is an internal event of 7146, accessible with RPS ** and temporarily raised high every n lines ** (n in defined in the RPS_THRESH1 counter threshold) ** I think HS is raised high on the beginning of the n-th line ** and remains high until this n-th line that triggered -** it is completely received. When the receiption of n-th line +** it is completely received. When the reception of n-th line ** ends, HS is lowered. ** To transmit data over DMA, 7146 needs changing state at @@ -541,7 +541,7 @@ static int budget_patch_attach (struct saa7146_dev* dev, struct saa7146_pci_exte ** hardware debug note: a working budget card (including budget patch) ** with vpeirq() interrupt setup in mode "0x90" (every 64K) will ** generate 3 interrupts per 25-Hz DMA frame of 2*188*512 bytes -** and that means 3*25=75 Hz of interrupt freqency, as seen by +** and that means 3*25=75 Hz of interrupt frequency, as seen by ** watch cat /proc/interrupts ** ** If this frequency is 3x lower (and data received in the DMA @@ -550,7 +550,7 @@ static int budget_patch_attach (struct saa7146_dev* dev, struct saa7146_pci_exte ** this means VSYNC line is not connected in the hardware. ** (check soldering pcb and pins) ** The same behaviour of missing VSYNC can be duplicated on budget -** cards, by seting DD1_INIT trigger mode 7 in 3rd nibble. +** cards, by setting DD1_INIT trigger mode 7 in 3rd nibble. */ // Setup RPS1 "program" (p35) diff --git a/drivers/media/dvb/ttpci/budget.c b/drivers/media/dvb/ttpci/budget.c index e58f0391e9d..56f1c80defc 100644 --- a/drivers/media/dvb/ttpci/budget.c +++ b/drivers/media/dvb/ttpci/budget.c @@ -46,6 +46,10 @@ #include "lnbp21.h" #include "bsru6.h" +static int diseqc_method; +module_param(diseqc_method, int, 0444); +MODULE_PARM_DESC(diseqc_method, "Select DiSEqC method for subsystem id 13c2:1003, 0: default, 1: more reliable (for newer revisions only)"); + static void Set22K (struct budget *budget, int state) { struct saa7146_dev *dev=budget->dev; @@ -382,6 +386,11 @@ static void frontend_init(struct budget *budget) if (budget->dvb_frontend) { budget->dvb_frontend->ops.tuner_ops.set_params = alps_bsru6_tuner_set_params; budget->dvb_frontend->tuner_priv = &budget->i2c_adap; + if (budget->dev->pci->subsystem_device == 0x1003 && diseqc_method == 0) { + budget->dvb_frontend->ops.diseqc_send_master_cmd = budget_diseqc_send_master_cmd; + budget->dvb_frontend->ops.diseqc_send_burst = budget_diseqc_send_burst; + budget->dvb_frontend->ops.set_tone = budget_set_tone; + } break; } break; diff --git a/drivers/media/dvb/ttusb-dec/ttusb_dec.c b/drivers/media/dvb/ttusb-dec/ttusb_dec.c index a1c9fa9919e..8135f3e76ae 100644 --- a/drivers/media/dvb/ttusb-dec/ttusb_dec.c +++ b/drivers/media/dvb/ttusb-dec/ttusb_dec.c @@ -1135,8 +1135,7 @@ static void ttusb_dec_free_iso_urbs(struct ttusb_dec *dec) dprintk("%s\n", __FUNCTION__); for (i = 0; i < ISO_BUF_COUNT; i++) - if (dec->iso_urb[i]) - usb_free_urb(dec->iso_urb[i]); + usb_free_urb(dec->iso_urb[i]); pci_free_consistent(NULL, ISO_FRAME_SIZE * (FRAMES_PER_ISO_BUF * diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index bf267552941..b8fde5cf473 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -24,7 +24,7 @@ config VIDEO_HELPER_CHIPS_AUTO decode audio/video standards. This option will autoselect all pertinent modules to each selected video module. - Unselect this only if you know exaclty what you are doing, since + Unselect this only if you know exactly what you are doing, since it may break support on some boards. In doubt, say Y. diff --git a/drivers/media/video/et61x251/et61x251_core.c b/drivers/media/video/et61x251/et61x251_core.c index f786ab11d2c..86e353b26b5 100644 --- a/drivers/media/video/et61x251/et61x251_core.c +++ b/drivers/media/video/et61x251/et61x251_core.c @@ -1182,8 +1182,6 @@ static void et61x251_release_resources(struct et61x251_device* cam) video_set_drvdata(cam->v4ldev, NULL); video_unregister_device(cam->v4ldev); - usb_put_dev(cam->usbdev); - mutex_unlock(&et61x251_sysfs_lock); kfree(cam->control_buffer); @@ -1275,6 +1273,7 @@ static int et61x251_release(struct inode* inode, struct file* filp) if (cam->state & DEV_DISCONNECTED) { et61x251_release_resources(cam); + usb_put_dev(cam->usbdev); mutex_unlock(&cam->dev_mutex); kfree(cam); return 0; diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.c b/drivers/media/video/pvrusb2/pvrusb2-hdw.c index f920e0ccacd..1f787333d18 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-hdw.c +++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.c @@ -1953,8 +1953,8 @@ struct pvr2_hdw *pvr2_hdw_create(struct usb_interface *intf, return hdw; fail: if (hdw) { - if (hdw->ctl_read_urb) usb_free_urb(hdw->ctl_read_urb); - if (hdw->ctl_write_urb) usb_free_urb(hdw->ctl_write_urb); + usb_free_urb(hdw->ctl_read_urb); + usb_free_urb(hdw->ctl_write_urb); if (hdw->ctl_read_buffer) kfree(hdw->ctl_read_buffer); if (hdw->ctl_write_buffer) kfree(hdw->ctl_write_buffer); if (hdw->controls) kfree(hdw->controls); @@ -2575,12 +2575,10 @@ static void pvr2_ctl_timeout(unsigned long data) struct pvr2_hdw *hdw = (struct pvr2_hdw *)data; if (hdw->ctl_write_pend_flag || hdw->ctl_read_pend_flag) { hdw->ctl_timeout_flag = !0; - if (hdw->ctl_write_pend_flag && hdw->ctl_write_urb) { + if (hdw->ctl_write_pend_flag) usb_unlink_urb(hdw->ctl_write_urb); - } - if (hdw->ctl_read_pend_flag && hdw->ctl_read_urb) { + if (hdw->ctl_read_pend_flag) usb_unlink_urb(hdw->ctl_read_urb); - } } } diff --git a/drivers/media/video/pvrusb2/pvrusb2-io.c b/drivers/media/video/pvrusb2/pvrusb2-io.c index 70aa63eba0c..57fb3203354 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-io.c +++ b/drivers/media/video/pvrusb2/pvrusb2-io.c @@ -289,7 +289,7 @@ static void pvr2_buffer_done(struct pvr2_buffer *bp) pvr2_buffer_set_none(bp); bp->signature = 0; bp->stream = NULL; - if (bp->purb) usb_free_urb(bp->purb); + usb_free_urb(bp->purb); pvr2_trace(PVR2_TRACE_BUF_POOL,"/*---TRACE_FLOW---*/" " bufferDone %p",bp); } diff --git a/drivers/media/video/pwc/pwc-if.c b/drivers/media/video/pwc/pwc-if.c index 46c11483088..a996aad7927 100644 --- a/drivers/media/video/pwc/pwc-if.c +++ b/drivers/media/video/pwc/pwc-if.c @@ -866,11 +866,9 @@ int pwc_isoc_init(struct pwc_device *pdev) } if (ret) { /* De-allocate in reverse order */ - while (i >= 0) { - if (pdev->sbuf[i].urb != NULL) - usb_free_urb(pdev->sbuf[i].urb); + while (i--) { + usb_free_urb(pdev->sbuf[i].urb); pdev->sbuf[i].urb = NULL; - i--; } return ret; } @@ -1095,8 +1093,7 @@ static int pwc_video_open(struct inode *inode, struct file *file) PWC_DEBUG_OPEN(">> video_open called(vdev = 0x%p).\n", vdev); pdev = (struct pwc_device *)vdev->priv; - if (pdev == NULL) - BUG(); + BUG_ON(!pdev); if (pdev->vopen) { PWC_DEBUG_OPEN("I'm busy, someone is using the device.\n"); return -EBUSY; diff --git a/drivers/media/video/saa6588.c b/drivers/media/video/saa6588.c index 8ba05c214ca..92eabf88a09 100644 --- a/drivers/media/video/saa6588.c +++ b/drivers/media/video/saa6588.c @@ -212,8 +212,10 @@ static void read_from_buf(struct saa6588 *s, struct rds_command *a) if (rd_blocks > s->block_count) rd_blocks = s->block_count; - if (!rd_blocks) + if (!rd_blocks) { + spin_unlock_irqrestore(&s->lock, flags); return; + } for (i = 0; i < rd_blocks; i++) { if (block_to_user_buf(s, buf_ptr)) { diff --git a/drivers/media/video/saa7115.c b/drivers/media/video/saa7115.c index c5719f7bd1a..f28398dd9d9 100644 --- a/drivers/media/video/saa7115.c +++ b/drivers/media/video/saa7115.c @@ -1464,8 +1464,6 @@ static int saa711x_attach(struct i2c_adapter *adapter, int address, int kind) client->driver = &i2c_driver_saa711x; snprintf(client->name, sizeof(client->name) - 1, "saa7115"); - v4l_dbg(1, debug, client, "detecting saa7115 client on address 0x%x\n", address << 1); - for (i=0;i<0x0f;i++) { saa711x_write(client, 0, i); name[i] = (saa711x_read(client, 0) &0x0f) +'0'; @@ -1477,6 +1475,13 @@ static int saa711x_attach(struct i2c_adapter *adapter, int address, int kind) saa711x_write(client, 0, 5); chip_id = saa711x_read(client, 0) & 0x0f; + /* Check whether this chip is part of the saa711x series */ + if (memcmp(name, "1f711", 5)) { + v4l_dbg(1, debug, client, "chip found @ 0x%x (ID %s) does not match a known saa711x chip.\n", + address << 1, name); + return 0; + } + snprintf(client->name, sizeof(client->name) - 1, "saa711%d",chip_id); v4l_info(client, "saa711%d found (%s) @ 0x%x (%s)\n", chip_id, name, address << 1, adapter->name); diff --git a/drivers/media/video/sn9c102/sn9c102_core.c b/drivers/media/video/sn9c102/sn9c102_core.c index a4702d3c2ac..18458d46c0f 100644 --- a/drivers/media/video/sn9c102/sn9c102_core.c +++ b/drivers/media/video/sn9c102/sn9c102_core.c @@ -775,7 +775,7 @@ static int sn9c102_start_transfer(struct sn9c102_device* cam) return 0; free_urbs: - for (i = 0; (i < SN9C102_URBS) && cam->urb[i]; i++) + for (i = 0; i < SN9C102_URBS; i++) usb_free_urb(cam->urb[i]); free_buffers: @@ -1462,8 +1462,6 @@ static void sn9c102_release_resources(struct sn9c102_device* cam) video_set_drvdata(cam->v4ldev, NULL); video_unregister_device(cam->v4ldev); - usb_put_dev(cam->usbdev); - mutex_unlock(&sn9c102_sysfs_lock); kfree(cam->control_buffer); @@ -1555,6 +1553,7 @@ static int sn9c102_release(struct inode* inode, struct file* filp) if (cam->state & DEV_DISCONNECTED) { sn9c102_release_resources(cam); + usb_put_dev(cam->usbdev); mutex_unlock(&cam->dev_mutex); kfree(cam); return 0; diff --git a/drivers/media/video/usbvideo/quickcam_messenger.c b/drivers/media/video/usbvideo/quickcam_messenger.c index 9a26b9484aa..bbf2beeeb44 100644 --- a/drivers/media/video/usbvideo/quickcam_messenger.c +++ b/drivers/media/video/usbvideo/quickcam_messenger.c @@ -190,8 +190,7 @@ static int qcm_alloc_int_urb(struct qcm *cam) static void qcm_free_int(struct qcm *cam) { - if (cam->button_urb) - usb_free_urb(cam->button_urb); + usb_free_urb(cam->button_urb); } #endif /* CONFIG_INPUT */ diff --git a/drivers/media/video/zc0301/zc0301_core.c b/drivers/media/video/zc0301/zc0301_core.c index 5b556342442..52d0f759ee0 100644 --- a/drivers/media/video/zc0301/zc0301_core.c +++ b/drivers/media/video/zc0301/zc0301_core.c @@ -489,7 +489,7 @@ static int zc0301_start_transfer(struct zc0301_device* cam) return 0; free_urbs: - for (i = 0; (i < ZC0301_URBS) && cam->urb[i]; i++) + for (i = 0; i < ZC0301_URBS; i++) usb_free_urb(cam->urb[i]); free_buffers: diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c index e5c72719deb..051b7c5b8f0 100644 --- a/drivers/message/fusion/mptbase.c +++ b/drivers/message/fusion/mptbase.c @@ -6185,7 +6185,7 @@ mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info) "Abort", /* 12h */ "IO Not Yet Executed", /* 13h */ "IO Executed", /* 14h */ - "Persistant Reservation Out Not Affiliation Owner", /* 15h */ + "Persistent Reservation Out Not Affiliation Owner", /* 15h */ "Open Transmit DMA Abort", /* 16h */ "IO Device Missing Delay Retry", /* 17h */ NULL, /* 18h */ diff --git a/drivers/message/i2o/pci.c b/drivers/message/i2o/pci.c index 62f1ac08332..8287f95c8c4 100644 --- a/drivers/message/i2o/pci.c +++ b/drivers/message/i2o/pci.c @@ -320,7 +320,6 @@ static int __devinit i2o_pci_probe(struct pci_dev *pdev, struct i2o_controller *c; int rc; struct pci_dev *i960 = NULL; - int enabled = pdev->is_enabled; printk(KERN_INFO "i2o: Checking for PCI I2O controllers...\n"); @@ -330,12 +329,11 @@ static int __devinit i2o_pci_probe(struct pci_dev *pdev, return -ENODEV; } - if (!enabled) - if ((rc = pci_enable_device(pdev))) { - printk(KERN_WARNING "i2o: couldn't enable device %s\n", - pci_name(pdev)); - return rc; - } + if ((rc = pci_enable_device(pdev))) { + printk(KERN_WARNING "i2o: couldn't enable device %s\n", + pci_name(pdev)); + return rc; + } if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)) { printk(KERN_WARNING "i2o: no suitable DMA found for %s\n", @@ -442,8 +440,7 @@ static int __devinit i2o_pci_probe(struct pci_dev *pdev, i2o_iop_free(c); disable: - if (!enabled) - pci_disable_device(pdev); + pci_disable_device(pdev); return rc; } diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig index ea41852ec8c..f4f8ccaf545 100644 --- a/drivers/mmc/Kconfig +++ b/drivers/mmc/Kconfig @@ -40,7 +40,7 @@ config MMC_ARMMMCI If unsure, say N. config MMC_PXA - tristate "Intel PXA255 Multimedia Card Interface support" + tristate "Intel PXA25x/26x/27x Multimedia Card Interface support" depends on ARCH_PXA && MMC help This selects the Intel(R) PXA(R) Multimedia card Interface. diff --git a/drivers/mmc/at91_mci.c b/drivers/mmc/at91_mci.c index 494b23fb0a0..6495cd8a930 100644 --- a/drivers/mmc/at91_mci.c +++ b/drivers/mmc/at91_mci.c @@ -793,7 +793,7 @@ int at91_mci_get_ro(struct mmc_host *mmc) return read_only; } -static struct mmc_host_ops at91_mci_ops = { +static const struct mmc_host_ops at91_mci_ops = { .request = at91_mci_request, .set_ios = at91_mci_set_ios, .get_ro = at91_mci_get_ro, diff --git a/drivers/mmc/au1xmmc.c b/drivers/mmc/au1xmmc.c index 53ffcbb14a9..447fba5825f 100644 --- a/drivers/mmc/au1xmmc.c +++ b/drivers/mmc/au1xmmc.c @@ -875,7 +875,7 @@ static void au1xmmc_init_dma(struct au1xmmc_host *host) host->rx_chan = rxchan; } -struct mmc_host_ops au1xmmc_ops = { +struct const mmc_host_ops au1xmmc_ops = { .request = au1xmmc_request, .set_ios = au1xmmc_set_ios, }; diff --git a/drivers/mmc/imxmmc.c b/drivers/mmc/imxmmc.c index 659d4a822cc..06e7fcd1922 100644 --- a/drivers/mmc/imxmmc.c +++ b/drivers/mmc/imxmmc.c @@ -877,7 +877,7 @@ static void imxmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) } } -static struct mmc_host_ops imxmci_ops = { +static const struct mmc_host_ops imxmci_ops = { .request = imxmci_request, .set_ios = imxmci_set_ios, }; diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index 21fd39e4a20..6f2a282e2b9 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -4,6 +4,7 @@ * Copyright (C) 2003-2004 Russell King, All Rights Reserved. * SD support Copyright (C) 2004 Ian Molton, All Rights Reserved. * SD support Copyright (C) 2005 Pierre Ossman, All Rights Reserved. + * MMCv4 support Copyright (C) 2006 Philip Langdale, All Rights Reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -396,23 +397,23 @@ static int mmc_select_card(struct mmc_host *host, struct mmc_card *card) return err; /* - * Default bus width is 1 bit. - */ - host->ios.bus_width = MMC_BUS_WIDTH_1; - - /* - * We can only change the bus width of the selected - * card so therefore we have to put the handling + * We can only change the bus width of SD cards when + * they are selected so we have to put the handling * here. + * + * The card is in 1 bit mode by default so + * we only need to change if it supports the + * wider version. */ - if (host->caps & MMC_CAP_4_BIT_DATA) { + if (mmc_card_sd(card) && + (card->scr.bus_widths & SD_SCR_BUS_WIDTH_4)) { + /* - * The card is in 1 bit mode by default so - * we only need to change if it supports the - * wider version. - */ - if (mmc_card_sd(card) && - (card->scr.bus_widths & SD_SCR_BUS_WIDTH_4)) { + * Default bus width is 1 bit. + */ + host->ios.bus_width = MMC_BUS_WIDTH_1; + + if (host->caps & MMC_CAP_4_BIT_DATA) { struct mmc_command cmd; cmd.opcode = SD_APP_SET_BUS_WIDTH; cmd.arg = SD_BUS_WIDTH_4; @@ -453,11 +454,11 @@ static void mmc_deselect_cards(struct mmc_host *host) static inline void mmc_delay(unsigned int ms) { - if (ms < HZ / 1000) { - yield(); + if (ms < 1000 / HZ) { + cond_resched(); mdelay(ms); } else { - msleep_interruptible (ms); + msleep(ms); } } @@ -953,6 +954,137 @@ static void mmc_read_csds(struct mmc_host *host) } } +static void mmc_process_ext_csds(struct mmc_host *host) +{ + int err; + struct mmc_card *card; + + struct mmc_request mrq; + struct mmc_command cmd; + struct mmc_data data; + + struct scatterlist sg; + + /* + * As the ext_csd is so large and mostly unused, we don't store the + * raw block in mmc_card. + */ + u8 *ext_csd; + ext_csd = kmalloc(512, GFP_KERNEL); + if (!ext_csd) { + printk("%s: could not allocate a buffer to receive the ext_csd." + "mmc v4 cards will be treated as v3.\n", + mmc_hostname(host)); + return; + } + + list_for_each_entry(card, &host->cards, node) { + if (card->state & (MMC_STATE_DEAD|MMC_STATE_PRESENT)) + continue; + if (mmc_card_sd(card)) + continue; + if (card->csd.mmca_vsn < CSD_SPEC_VER_4) + continue; + + err = mmc_select_card(host, card); + if (err != MMC_ERR_NONE) { + mmc_card_set_dead(card); + continue; + } + + memset(&cmd, 0, sizeof(struct mmc_command)); + + cmd.opcode = MMC_SEND_EXT_CSD; + cmd.arg = 0; + cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC; + + memset(&data, 0, sizeof(struct mmc_data)); + + mmc_set_data_timeout(&data, card, 0); + + data.blksz = 512; + data.blocks = 1; + data.flags = MMC_DATA_READ; + data.sg = &sg; + data.sg_len = 1; + + memset(&mrq, 0, sizeof(struct mmc_request)); + + mrq.cmd = &cmd; + mrq.data = &data; + + sg_init_one(&sg, ext_csd, 512); + + mmc_wait_for_req(host, &mrq); + + if (cmd.error != MMC_ERR_NONE || data.error != MMC_ERR_NONE) { + mmc_card_set_dead(card); + continue; + } + + switch (ext_csd[EXT_CSD_CARD_TYPE]) { + case EXT_CSD_CARD_TYPE_52 | EXT_CSD_CARD_TYPE_26: + card->ext_csd.hs_max_dtr = 52000000; + break; + case EXT_CSD_CARD_TYPE_26: + card->ext_csd.hs_max_dtr = 26000000; + break; + default: + /* MMC v4 spec says this cannot happen */ + printk("%s: card is mmc v4 but doesn't support " + "any high-speed modes.\n", + mmc_hostname(card->host)); + mmc_card_set_bad(card); + continue; + } + + /* Activate highspeed support. */ + cmd.opcode = MMC_SWITCH; + cmd.arg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) | + (EXT_CSD_HS_TIMING << 16) | + (1 << 8) | + EXT_CSD_CMD_SET_NORMAL; + cmd.flags = MMC_RSP_R1B | MMC_CMD_AC; + + err = mmc_wait_for_cmd(host, &cmd, CMD_RETRIES); + if (err != MMC_ERR_NONE) { + printk("%s: failed to switch card to mmc v4 " + "high-speed mode.\n", + mmc_hostname(card->host)); + continue; + } + + mmc_card_set_highspeed(card); + + /* Check for host support for wide-bus modes. */ + if (!(host->caps & MMC_CAP_4_BIT_DATA)) { + continue; + } + + /* Activate 4-bit support. */ + cmd.opcode = MMC_SWITCH; + cmd.arg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) | + (EXT_CSD_BUS_WIDTH << 16) | + (EXT_CSD_BUS_WIDTH_4 << 8) | + EXT_CSD_CMD_SET_NORMAL; + cmd.flags = MMC_RSP_R1B | MMC_CMD_AC; + + err = mmc_wait_for_cmd(host, &cmd, CMD_RETRIES); + if (err != MMC_ERR_NONE) { + printk("%s: failed to switch card to " + "mmc v4 4-bit bus mode.\n", + mmc_hostname(card->host)); + continue; + } + + host->ios.bus_width = MMC_BUS_WIDTH_4; + } + + kfree(ext_csd); + + mmc_deselect_cards(host); +} + static void mmc_read_scrs(struct mmc_host *host) { int err; @@ -1025,14 +1157,133 @@ static void mmc_read_scrs(struct mmc_host *host) mmc_deselect_cards(host); } +static void mmc_read_switch_caps(struct mmc_host *host) +{ + int err; + struct mmc_card *card; + struct mmc_request mrq; + struct mmc_command cmd; + struct mmc_data data; + unsigned char *status; + struct scatterlist sg; + + status = kmalloc(64, GFP_KERNEL); + if (!status) { + printk(KERN_WARNING "%s: Unable to allocate buffer for " + "reading switch capabilities.\n", + mmc_hostname(host)); + return; + } + + list_for_each_entry(card, &host->cards, node) { + if (card->state & (MMC_STATE_DEAD|MMC_STATE_PRESENT)) + continue; + if (!mmc_card_sd(card)) + continue; + if (card->scr.sda_vsn < SCR_SPEC_VER_1) + continue; + + err = mmc_select_card(host, card); + if (err != MMC_ERR_NONE) { + mmc_card_set_dead(card); + continue; + } + + memset(&cmd, 0, sizeof(struct mmc_command)); + + cmd.opcode = SD_SWITCH; + cmd.arg = 0x00FFFFF1; + cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC; + + memset(&data, 0, sizeof(struct mmc_data)); + + mmc_set_data_timeout(&data, card, 0); + + data.blksz = 64; + data.blocks = 1; + data.flags = MMC_DATA_READ; + data.sg = &sg; + data.sg_len = 1; + + memset(&mrq, 0, sizeof(struct mmc_request)); + + mrq.cmd = &cmd; + mrq.data = &data; + + sg_init_one(&sg, status, 64); + + mmc_wait_for_req(host, &mrq); + + if (cmd.error != MMC_ERR_NONE || data.error != MMC_ERR_NONE) { + mmc_card_set_dead(card); + continue; + } + + if (status[13] & 0x02) + card->sw_caps.hs_max_dtr = 50000000; + + memset(&cmd, 0, sizeof(struct mmc_command)); + + cmd.opcode = SD_SWITCH; + cmd.arg = 0x80FFFFF1; + cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC; + + memset(&data, 0, sizeof(struct mmc_data)); + + mmc_set_data_timeout(&data, card, 0); + + data.blksz = 64; + data.blocks = 1; + data.flags = MMC_DATA_READ; + data.sg = &sg; + data.sg_len = 1; + + memset(&mrq, 0, sizeof(struct mmc_request)); + + mrq.cmd = &cmd; + mrq.data = &data; + + sg_init_one(&sg, status, 64); + + mmc_wait_for_req(host, &mrq); + + if (cmd.error != MMC_ERR_NONE || data.error != MMC_ERR_NONE) { + mmc_card_set_dead(card); + continue; + } + + if ((status[16] & 0xF) != 1) { + printk(KERN_WARNING "%s: Problem switching card " + "into high-speed mode!\n", + mmc_hostname(host)); + continue; + } + + mmc_card_set_highspeed(card); + } + + kfree(status); + + mmc_deselect_cards(host); +} + static unsigned int mmc_calculate_clock(struct mmc_host *host) { struct mmc_card *card; unsigned int max_dtr = host->f_max; list_for_each_entry(card, &host->cards, node) - if (!mmc_card_dead(card) && max_dtr > card->csd.max_dtr) - max_dtr = card->csd.max_dtr; + if (!mmc_card_dead(card)) { + if (mmc_card_highspeed(card) && mmc_card_sd(card)) { + if (max_dtr > card->sw_caps.hs_max_dtr) + max_dtr = card->sw_caps.hs_max_dtr; + } else if (mmc_card_highspeed(card) && !mmc_card_sd(card)) { + if (max_dtr > card->ext_csd.hs_max_dtr) + max_dtr = card->ext_csd.hs_max_dtr; + } else if (max_dtr > card->csd.max_dtr) { + max_dtr = card->csd.max_dtr; + } + } pr_debug("%s: selected %d.%03dMHz transfer rate\n", mmc_hostname(host), @@ -1150,8 +1401,11 @@ static void mmc_setup(struct mmc_host *host) mmc_read_csds(host); - if (host->mode == MMC_MODE_SD) + if (host->mode == MMC_MODE_SD) { mmc_read_scrs(host); + mmc_read_switch_caps(host); + } else + mmc_process_ext_csds(host); } diff --git a/drivers/mmc/mmc_block.c b/drivers/mmc/mmc_block.c index f9027c8db79..87713572293 100644 --- a/drivers/mmc/mmc_block.c +++ b/drivers/mmc/mmc_block.c @@ -83,7 +83,6 @@ static void mmc_blk_put(struct mmc_blk_data *md) md->usage--; if (md->usage == 0) { put_disk(md->disk); - mmc_cleanup_queue(&md->queue); kfree(md); } mutex_unlock(&open_lock); @@ -225,10 +224,10 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) struct mmc_blk_data *md = mq->data; struct mmc_card *card = md->queue.card; struct mmc_blk_request brq; - int ret; + int ret = 1; if (mmc_card_claim_host(card)) - goto cmd_err; + goto flush_queue; do { struct mmc_command cmd; @@ -345,8 +344,6 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) return 1; cmd_err: - ret = 1; - /* * If this is an SD card and we're writing, we can first * mark the known good sectors as ok. @@ -380,6 +377,7 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) mmc_card_release_host(card); +flush_queue: spin_lock_irq(&md->lock); while (ret) { ret = end_that_request_chunk(req, 0, @@ -553,12 +551,11 @@ static void mmc_blk_remove(struct mmc_card *card) if (md) { int devidx; + /* Stop new requests from getting into the queue */ del_gendisk(md->disk); - /* - * I think this is needed. - */ - md->disk->queue = NULL; + /* Then flush out any already in there */ + mmc_cleanup_queue(&md->queue); devidx = md->disk->first_minor >> MMC_SHIFT; __clear_bit(devidx, dev_use); diff --git a/drivers/mmc/mmc_queue.c b/drivers/mmc/mmc_queue.c index 4ccdd82b680..a17423a4ed8 100644 --- a/drivers/mmc/mmc_queue.c +++ b/drivers/mmc/mmc_queue.c @@ -10,13 +10,13 @@ */ #include <linux/module.h> #include <linux/blkdev.h> +#include <linux/kthread.h> #include <linux/mmc/card.h> #include <linux/mmc/host.h> #include "mmc_queue.h" -#define MMC_QUEUE_EXIT (1 << 0) -#define MMC_QUEUE_SUSPENDED (1 << 1) +#define MMC_QUEUE_SUSPENDED (1 << 0) /* * Prepare a MMC request. Essentially, this means passing the @@ -59,7 +59,6 @@ static int mmc_queue_thread(void *d) { struct mmc_queue *mq = d; struct request_queue *q = mq->queue; - DECLARE_WAITQUEUE(wait, current); /* * Set iothread to ensure that we aren't put to sleep by @@ -67,12 +66,7 @@ static int mmc_queue_thread(void *d) */ current->flags |= PF_MEMALLOC|PF_NOFREEZE; - daemonize("mmcqd"); - - complete(&mq->thread_complete); - down(&mq->thread_sem); - add_wait_queue(&mq->thread_wq, &wait); do { struct request *req = NULL; @@ -84,7 +78,7 @@ static int mmc_queue_thread(void *d) spin_unlock_irq(q->queue_lock); if (!req) { - if (mq->flags & MMC_QUEUE_EXIT) + if (kthread_should_stop()) break; up(&mq->thread_sem); schedule(); @@ -95,10 +89,8 @@ static int mmc_queue_thread(void *d) mq->issue_fn(mq, req); } while (1); - remove_wait_queue(&mq->thread_wq, &wait); up(&mq->thread_sem); - complete_and_exit(&mq->thread_complete, 0); return 0; } @@ -111,9 +103,22 @@ static int mmc_queue_thread(void *d) static void mmc_request(request_queue_t *q) { struct mmc_queue *mq = q->queuedata; + struct request *req; + int ret; + + if (!mq) { + printk(KERN_ERR "MMC: killing requests for dead queue\n"); + while ((req = elv_next_request(q)) != NULL) { + do { + ret = end_that_request_chunk(req, 0, + req->current_nr_sectors << 9); + } while (ret); + } + return; + } if (!mq->req) - wake_up(&mq->thread_wq); + wake_up_process(mq->thread); } /** @@ -130,8 +135,8 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card, spinlock_t *lock u64 limit = BLK_BOUNCE_HIGH; int ret; - if (host->dev->dma_mask && *host->dev->dma_mask) - limit = *host->dev->dma_mask; + if (mmc_dev(host)->dma_mask && *mmc_dev(host)->dma_mask) + limit = *mmc_dev(host)->dma_mask; mq->card = card; mq->queue = blk_init_queue(mmc_request, lock); @@ -152,36 +157,40 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card, spinlock_t *lock GFP_KERNEL); if (!mq->sg) { ret = -ENOMEM; - goto cleanup; + goto cleanup_queue; } - init_completion(&mq->thread_complete); - init_waitqueue_head(&mq->thread_wq); init_MUTEX(&mq->thread_sem); - ret = kernel_thread(mmc_queue_thread, mq, CLONE_KERNEL); - if (ret >= 0) { - wait_for_completion(&mq->thread_complete); - init_completion(&mq->thread_complete); - ret = 0; - goto out; + mq->thread = kthread_run(mmc_queue_thread, mq, "mmcqd"); + if (IS_ERR(mq->thread)) { + ret = PTR_ERR(mq->thread); + goto free_sg; } - cleanup: + return 0; + + free_sg: kfree(mq->sg); mq->sg = NULL; - + cleanup_queue: blk_cleanup_queue(mq->queue); - out: return ret; } EXPORT_SYMBOL(mmc_init_queue); void mmc_cleanup_queue(struct mmc_queue *mq) { - mq->flags |= MMC_QUEUE_EXIT; - wake_up(&mq->thread_wq); - wait_for_completion(&mq->thread_complete); + request_queue_t *q = mq->queue; + unsigned long flags; + + /* Mark that we should start throwing out stragglers */ + spin_lock_irqsave(q->queue_lock, flags); + q->queuedata = NULL; + spin_unlock_irqrestore(q->queue_lock, flags); + + /* Then terminate our worker thread */ + kthread_stop(mq->thread); kfree(mq->sg); mq->sg = NULL; diff --git a/drivers/mmc/mmc_queue.h b/drivers/mmc/mmc_queue.h index 7182d2f69b4..c9f139e764f 100644 --- a/drivers/mmc/mmc_queue.h +++ b/drivers/mmc/mmc_queue.h @@ -6,8 +6,7 @@ struct task_struct; struct mmc_queue { struct mmc_card *card; - struct completion thread_complete; - wait_queue_head_t thread_wq; + struct task_struct *thread; struct semaphore thread_sem; unsigned int flags; struct request *req; diff --git a/drivers/mmc/mmc_sysfs.c b/drivers/mmc/mmc_sysfs.c index fd9a5fc6db7..e334acd045b 100644 --- a/drivers/mmc/mmc_sysfs.c +++ b/drivers/mmc/mmc_sysfs.c @@ -199,7 +199,7 @@ void mmc_init_card(struct mmc_card *card, struct mmc_host *host) memset(card, 0, sizeof(struct mmc_card)); card->host = host; device_initialize(&card->dev); - card->dev.parent = card->host->dev; + card->dev.parent = mmc_dev(host); card->dev.bus = &mmc_bus_type; card->dev.release = mmc_release_card; } @@ -242,7 +242,7 @@ void mmc_remove_card(struct mmc_card *card) } -static void mmc_host_classdev_release(struct class_device *dev) +static void mmc_host_classdev_release(struct device *dev) { struct mmc_host *host = cls_dev_to_mmc_host(dev); kfree(host); @@ -250,7 +250,7 @@ static void mmc_host_classdev_release(struct class_device *dev) static struct class mmc_host_class = { .name = "mmc_host", - .release = mmc_host_classdev_release, + .dev_release = mmc_host_classdev_release, }; static DEFINE_IDR(mmc_host_idr); @@ -267,10 +267,10 @@ struct mmc_host *mmc_alloc_host_sysfs(int extra, struct device *dev) if (host) { memset(host, 0, sizeof(struct mmc_host) + extra); - host->dev = dev; - host->class_dev.dev = host->dev; + host->parent = dev; + host->class_dev.parent = dev; host->class_dev.class = &mmc_host_class; - class_device_initialize(&host->class_dev); + device_initialize(&host->class_dev); } return host; @@ -292,10 +292,10 @@ int mmc_add_host_sysfs(struct mmc_host *host) if (err) return err; - snprintf(host->class_dev.class_id, BUS_ID_SIZE, + snprintf(host->class_dev.bus_id, BUS_ID_SIZE, "mmc%d", host->index); - return class_device_add(&host->class_dev); + return device_add(&host->class_dev); } /* @@ -303,7 +303,7 @@ int mmc_add_host_sysfs(struct mmc_host *host) */ void mmc_remove_host_sysfs(struct mmc_host *host) { - class_device_del(&host->class_dev); + device_del(&host->class_dev); spin_lock(&mmc_host_lock); idr_remove(&mmc_host_idr, host->index); @@ -315,7 +315,7 @@ void mmc_remove_host_sysfs(struct mmc_host *host) */ void mmc_free_host_sysfs(struct mmc_host *host) { - class_device_put(&host->class_dev); + put_device(&host->class_dev); } static struct workqueue_struct *workqueue; diff --git a/drivers/mmc/mmci.c b/drivers/mmc/mmci.c index 828503c4ee6..e9b80e92026 100644 --- a/drivers/mmc/mmci.c +++ b/drivers/mmc/mmci.c @@ -443,7 +443,7 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) } } -static struct mmc_host_ops mmci_ops = { +static const struct mmc_host_ops mmci_ops = { .request = mmci_request, .set_ios = mmci_set_ios, }; diff --git a/drivers/mmc/omap.c b/drivers/mmc/omap.c index 762fa289589..435d331e772 100644 --- a/drivers/mmc/omap.c +++ b/drivers/mmc/omap.c @@ -38,7 +38,57 @@ #include <asm/arch/fpga.h> #include <asm/arch/tps65010.h> -#include "omap.h" +#define OMAP_MMC_REG_CMD 0x00 +#define OMAP_MMC_REG_ARGL 0x04 +#define OMAP_MMC_REG_ARGH 0x08 +#define OMAP_MMC_REG_CON 0x0c +#define OMAP_MMC_REG_STAT 0x10 +#define OMAP_MMC_REG_IE 0x14 +#define OMAP_MMC_REG_CTO 0x18 +#define OMAP_MMC_REG_DTO 0x1c +#define OMAP_MMC_REG_DATA 0x20 +#define OMAP_MMC_REG_BLEN 0x24 +#define OMAP_MMC_REG_NBLK 0x28 +#define OMAP_MMC_REG_BUF 0x2c +#define OMAP_MMC_REG_SDIO 0x34 +#define OMAP_MMC_REG_REV 0x3c +#define OMAP_MMC_REG_RSP0 0x40 +#define OMAP_MMC_REG_RSP1 0x44 +#define OMAP_MMC_REG_RSP2 0x48 +#define OMAP_MMC_REG_RSP3 0x4c +#define OMAP_MMC_REG_RSP4 0x50 +#define OMAP_MMC_REG_RSP5 0x54 +#define OMAP_MMC_REG_RSP6 0x58 +#define OMAP_MMC_REG_RSP7 0x5c +#define OMAP_MMC_REG_IOSR 0x60 +#define OMAP_MMC_REG_SYSC 0x64 +#define OMAP_MMC_REG_SYSS 0x68 + +#define OMAP_MMC_STAT_CARD_ERR (1 << 14) +#define OMAP_MMC_STAT_CARD_IRQ (1 << 13) +#define OMAP_MMC_STAT_OCR_BUSY (1 << 12) +#define OMAP_MMC_STAT_A_EMPTY (1 << 11) +#define OMAP_MMC_STAT_A_FULL (1 << 10) +#define OMAP_MMC_STAT_CMD_CRC (1 << 8) +#define OMAP_MMC_STAT_CMD_TOUT (1 << 7) +#define OMAP_MMC_STAT_DATA_CRC (1 << 6) +#define OMAP_MMC_STAT_DATA_TOUT (1 << 5) +#define OMAP_MMC_STAT_END_BUSY (1 << 4) +#define OMAP_MMC_STAT_END_OF_DATA (1 << 3) +#define OMAP_MMC_STAT_CARD_BUSY (1 << 2) +#define OMAP_MMC_STAT_END_OF_CMD (1 << 0) + +#define OMAP_MMC_READ(host, reg) __raw_readw((host)->virt_base + OMAP_MMC_REG_##reg) +#define OMAP_MMC_WRITE(host, reg, val) __raw_writew((val), (host)->virt_base + OMAP_MMC_REG_##reg) + +/* + * Command types + */ +#define OMAP_MMC_CMDTYPE_BC 0 +#define OMAP_MMC_CMDTYPE_BCR 1 +#define OMAP_MMC_CMDTYPE_AC 2 +#define OMAP_MMC_CMDTYPE_ADTC 3 + #define DRIVER_NAME "mmci-omap" #define RSP_TYPE(x) ((x) & ~(MMC_RSP_BUSY|MMC_RSP_OPCODE)) @@ -60,8 +110,9 @@ struct mmc_omap_host { unsigned char id; /* 16xx chips have 2 MMC blocks */ struct clk * iclk; struct clk * fclk; - struct resource *res; - void __iomem *base; + struct resource *mem_res; + void __iomem *virt_base; + unsigned int phys_base; int irq; unsigned char bus_mode; unsigned char hw_bus_mode; @@ -191,16 +242,16 @@ mmc_omap_start_command(struct mmc_omap_host *host, struct mmc_command *cmd) clk_enable(host->fclk); - OMAP_MMC_WRITE(host->base, CTO, 200); - OMAP_MMC_WRITE(host->base, ARGL, cmd->arg & 0xffff); - OMAP_MMC_WRITE(host->base, ARGH, cmd->arg >> 16); - OMAP_MMC_WRITE(host->base, IE, + OMAP_MMC_WRITE(host, CTO, 200); + OMAP_MMC_WRITE(host, ARGL, cmd->arg & 0xffff); + OMAP_MMC_WRITE(host, ARGH, cmd->arg >> 16); + OMAP_MMC_WRITE(host, IE, OMAP_MMC_STAT_A_EMPTY | OMAP_MMC_STAT_A_FULL | OMAP_MMC_STAT_CMD_CRC | OMAP_MMC_STAT_CMD_TOUT | OMAP_MMC_STAT_DATA_CRC | OMAP_MMC_STAT_DATA_TOUT | OMAP_MMC_STAT_END_OF_CMD | OMAP_MMC_STAT_CARD_ERR | OMAP_MMC_STAT_END_OF_DATA); - OMAP_MMC_WRITE(host->base, CMD, cmdreg); + OMAP_MMC_WRITE(host, CMD, cmdreg); } static void @@ -296,22 +347,22 @@ mmc_omap_cmd_done(struct mmc_omap_host *host, struct mmc_command *cmd) if (cmd->flags & MMC_RSP_136) { /* response type 2 */ cmd->resp[3] = - OMAP_MMC_READ(host->base, RSP0) | - (OMAP_MMC_READ(host->base, RSP1) << 16); + OMAP_MMC_READ(host, RSP0) | + (OMAP_MMC_READ(host, RSP1) << 16); cmd->resp[2] = - OMAP_MMC_READ(host->base, RSP2) | - (OMAP_MMC_READ(host->base, RSP3) << 16); + OMAP_MMC_READ(host, RSP2) | + (OMAP_MMC_READ(host, RSP3) << 16); cmd->resp[1] = - OMAP_MMC_READ(host->base, RSP4) | - (OMAP_MMC_READ(host->base, RSP5) << 16); + OMAP_MMC_READ(host, RSP4) | + (OMAP_MMC_READ(host, RSP5) << 16); cmd->resp[0] = - OMAP_MMC_READ(host->base, RSP6) | - (OMAP_MMC_READ(host->base, RSP7) << 16); + OMAP_MMC_READ(host, RSP6) | + (OMAP_MMC_READ(host, RSP7) << 16); } else { /* response types 1, 1b, 3, 4, 5, 6 */ cmd->resp[0] = - OMAP_MMC_READ(host->base, RSP6) | - (OMAP_MMC_READ(host->base, RSP7) << 16); + OMAP_MMC_READ(host, RSP6) | + (OMAP_MMC_READ(host, RSP7) << 16); } } @@ -354,9 +405,9 @@ mmc_omap_xfer_data(struct mmc_omap_host *host, int write) host->data->bytes_xfered += n; if (write) { - __raw_writesw(host->base + OMAP_MMC_REG_DATA, host->buffer, n); + __raw_writesw(host->virt_base + OMAP_MMC_REG_DATA, host->buffer, n); } else { - __raw_readsw(host->base + OMAP_MMC_REG_DATA, host->buffer, n); + __raw_readsw(host->virt_base + OMAP_MMC_REG_DATA, host->buffer, n); } } @@ -386,11 +437,11 @@ static irqreturn_t mmc_omap_irq(int irq, void *dev_id) int transfer_error; if (host->cmd == NULL && host->data == NULL) { - status = OMAP_MMC_READ(host->base, STAT); + status = OMAP_MMC_READ(host, STAT); dev_info(mmc_dev(host->mmc),"spurious irq 0x%04x\n", status); if (status != 0) { - OMAP_MMC_WRITE(host->base, STAT, status); - OMAP_MMC_WRITE(host->base, IE, 0); + OMAP_MMC_WRITE(host, STAT, status); + OMAP_MMC_WRITE(host, IE, 0); } return IRQ_HANDLED; } @@ -399,8 +450,8 @@ static irqreturn_t mmc_omap_irq(int irq, void *dev_id) end_transfer = 0; transfer_error = 0; - while ((status = OMAP_MMC_READ(host->base, STAT)) != 0) { - OMAP_MMC_WRITE(host->base, STAT, status); + while ((status = OMAP_MMC_READ(host, STAT)) != 0) { + OMAP_MMC_WRITE(host, STAT, status); #ifdef CONFIG_MMC_DEBUG dev_dbg(mmc_dev(host->mmc), "MMC IRQ %04x (CMD %d): ", status, host->cmd != NULL ? host->cmd->opcode : -1); @@ -470,8 +521,8 @@ static irqreturn_t mmc_omap_irq(int irq, void *dev_id) if (status & OMAP_MMC_STAT_CARD_ERR) { if (host->cmd && host->cmd->opcode == MMC_STOP_TRANSMISSION) { - u32 response = OMAP_MMC_READ(host->base, RSP6) - | (OMAP_MMC_READ(host->base, RSP7) << 16); + u32 response = OMAP_MMC_READ(host, RSP6) + | (OMAP_MMC_READ(host, RSP7) << 16); /* STOP sometimes sets must-ignore bits */ if (!(response & (R1_CC_ERROR | R1_ILLEGAL_COMMAND @@ -530,12 +581,6 @@ static void mmc_omap_switch_timer(unsigned long arg) schedule_work(&host->switch_work); } -/* FIXME: Handle card insertion and removal properly. Maybe use a mask - * for MMC state? */ -static void mmc_omap_switch_callback(unsigned long data, u8 mmc_mask) -{ -} - static void mmc_omap_switch_handler(void *data) { struct mmc_omap_host *host = (struct mmc_omap_host *) data; @@ -581,7 +626,7 @@ mmc_omap_prepare_dma(struct mmc_omap_host *host, struct mmc_data *data) int dst_port = 0; int sync_dev = 0; - data_addr = io_v2p((u32) host->base) + OMAP_MMC_REG_DATA; + data_addr = host->phys_base + OMAP_MMC_REG_DATA; frame = data->blksz; count = sg_dma_len(sg); @@ -640,10 +685,9 @@ mmc_omap_prepare_dma(struct mmc_omap_host *host, struct mmc_data *data) } /* Max limit for DMA frame count is 0xffff */ - if (unlikely(count > 0xffff)) - BUG(); + BUG_ON(count > 0xffff); - OMAP_MMC_WRITE(host->base, BUF, buf); + OMAP_MMC_WRITE(host, BUF, buf); omap_set_dma_transfer_params(dma_ch, OMAP_DMA_DATA_TYPE_S16, frame, count, OMAP_DMA_SYNC_FRAME, sync_dev, 0); @@ -728,11 +772,11 @@ static inline void set_cmd_timeout(struct mmc_omap_host *host, struct mmc_reques { u16 reg; - reg = OMAP_MMC_READ(host->base, SDIO); + reg = OMAP_MMC_READ(host, SDIO); reg &= ~(1 << 5); - OMAP_MMC_WRITE(host->base, SDIO, reg); + OMAP_MMC_WRITE(host, SDIO, reg); /* Set maximum timeout */ - OMAP_MMC_WRITE(host->base, CTO, 0xff); + OMAP_MMC_WRITE(host, CTO, 0xff); } static inline void set_data_timeout(struct mmc_omap_host *host, struct mmc_request *req) @@ -746,14 +790,14 @@ static inline void set_data_timeout(struct mmc_omap_host *host, struct mmc_reque timeout = req->data->timeout_clks + req->data->timeout_ns / 500; /* Check if we need to use timeout multiplier register */ - reg = OMAP_MMC_READ(host->base, SDIO); + reg = OMAP_MMC_READ(host, SDIO); if (timeout > 0xffff) { reg |= (1 << 5); timeout /= 1024; } else reg &= ~(1 << 5); - OMAP_MMC_WRITE(host->base, SDIO, reg); - OMAP_MMC_WRITE(host->base, DTO, timeout); + OMAP_MMC_WRITE(host, SDIO, reg); + OMAP_MMC_WRITE(host, DTO, timeout); } static void @@ -765,19 +809,18 @@ mmc_omap_prepare_data(struct mmc_omap_host *host, struct mmc_request *req) host->data = data; if (data == NULL) { - OMAP_MMC_WRITE(host->base, BLEN, 0); - OMAP_MMC_WRITE(host->base, NBLK, 0); - OMAP_MMC_WRITE(host->base, BUF, 0); + OMAP_MMC_WRITE(host, BLEN, 0); + OMAP_MMC_WRITE(host, NBLK, 0); + OMAP_MMC_WRITE(host, BUF, 0); host->dma_in_use = 0; set_cmd_timeout(host, req); return; } - block_size = data->blksz; - OMAP_MMC_WRITE(host->base, NBLK, data->blocks - 1); - OMAP_MMC_WRITE(host->base, BLEN, block_size - 1); + OMAP_MMC_WRITE(host, NBLK, data->blocks - 1); + OMAP_MMC_WRITE(host, BLEN, block_size - 1); set_data_timeout(host, req); /* cope with calling layer confusion; it issues "single @@ -819,7 +862,7 @@ mmc_omap_prepare_data(struct mmc_omap_host *host, struct mmc_request *req) /* Revert to PIO? */ if (!use_dma) { - OMAP_MMC_WRITE(host->base, BUF, 0x1f1f); + OMAP_MMC_WRITE(host, BUF, 0x1f1f); host->total_bytes_left = data->blocks * block_size; host->sg_len = sg_len; mmc_omap_sg_to_buf(host); @@ -845,7 +888,6 @@ static void mmc_omap_request(struct mmc_host *mmc, struct mmc_request *req) static void innovator_fpga_socket_power(int on) { #if defined(CONFIG_MACH_OMAP_INNOVATOR) && defined(CONFIG_ARCH_OMAP15XX) - if (on) { fpga_write(fpga_read(OMAP1510_FPGA_POWER) | (1 << 3), OMAP1510_FPGA_POWER); @@ -871,8 +913,8 @@ static void mmc_omap_power(struct mmc_omap_host *host, int on) /* GPIO 4 of TPS65010 sends SD_EN signal */ tps65010_set_gpio_out_value(GPIO4, HIGH); else if (cpu_is_omap24xx()) { - u16 reg = OMAP_MMC_READ(host->base, CON); - OMAP_MMC_WRITE(host->base, CON, reg | (1 << 11)); + u16 reg = OMAP_MMC_READ(host, CON); + OMAP_MMC_WRITE(host, CON, reg | (1 << 11)); } else if (host->power_pin >= 0) omap_set_gpio_dataout(host->power_pin, 1); @@ -884,8 +926,8 @@ static void mmc_omap_power(struct mmc_omap_host *host, int on) else if (machine_is_omap_h3()) tps65010_set_gpio_out_value(GPIO4, LOW); else if (cpu_is_omap24xx()) { - u16 reg = OMAP_MMC_READ(host->base, CON); - OMAP_MMC_WRITE(host->base, CON, reg & ~(1 << 11)); + u16 reg = OMAP_MMC_READ(host, CON); + OMAP_MMC_WRITE(host, CON, reg & ~(1 << 11)); } else if (host->power_pin >= 0) omap_set_gpio_dataout(host->power_pin, 0); @@ -927,7 +969,7 @@ static void mmc_omap_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) case MMC_POWER_UP: case MMC_POWER_ON: mmc_omap_power(host, 1); - dsor |= 1<<11; + dsor |= 1 << 11; break; } @@ -941,14 +983,14 @@ static void mmc_omap_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) * which results in the while loop below getting stuck. * Writing to the CON register twice seems to do the trick. */ for (i = 0; i < 2; i++) - OMAP_MMC_WRITE(host->base, CON, dsor); + OMAP_MMC_WRITE(host, CON, dsor); if (ios->power_mode == MMC_POWER_UP) { /* Send clock cycles, poll completion */ - OMAP_MMC_WRITE(host->base, IE, 0); - OMAP_MMC_WRITE(host->base, STAT, 0xffff); - OMAP_MMC_WRITE(host->base, CMD, 1<<7); - while (0 == (OMAP_MMC_READ(host->base, STAT) & 1)); - OMAP_MMC_WRITE(host->base, STAT, 1); + OMAP_MMC_WRITE(host, IE, 0); + OMAP_MMC_WRITE(host, STAT, 0xffff); + OMAP_MMC_WRITE(host, CMD, 1 << 7); + while ((OMAP_MMC_READ(host, STAT) & 1) == 0); + OMAP_MMC_WRITE(host, STAT, 1); } clk_disable(host->fclk); } @@ -960,7 +1002,7 @@ static int mmc_omap_get_ro(struct mmc_host *mmc) return host->wp_pin && omap_get_gpio_datain(host->wp_pin); } -static struct mmc_host_ops mmc_omap_ops = { +static const struct mmc_host_ops mmc_omap_ops = { .request = mmc_omap_request, .set_ios = mmc_omap_set_ios, .get_ro = mmc_omap_get_ro, @@ -971,25 +1013,29 @@ static int __init mmc_omap_probe(struct platform_device *pdev) struct omap_mmc_conf *minfo = pdev->dev.platform_data; struct mmc_host *mmc; struct mmc_omap_host *host = NULL; - struct resource *r; + struct resource *res; int ret = 0; int irq; - - r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + if (minfo == NULL) { + dev_err(&pdev->dev, "platform data missing\n"); + return -ENXIO; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); irq = platform_get_irq(pdev, 0); - if (!r || irq < 0) + if (res == NULL || irq < 0) return -ENXIO; - r = request_mem_region(pdev->resource[0].start, - pdev->resource[0].end - pdev->resource[0].start + 1, - pdev->name); - if (!r) + res = request_mem_region(res->start, res->end - res->start + 1, + pdev->name); + if (res == NULL) return -EBUSY; mmc = mmc_alloc_host(sizeof(struct mmc_omap_host), &pdev->dev); - if (!mmc) { + if (mmc == NULL) { ret = -ENOMEM; - goto out; + goto err_free_mem_region; } host = mmc_priv(mmc); @@ -1001,13 +1047,13 @@ static int __init mmc_omap_probe(struct platform_device *pdev) host->dma_timer.data = (unsigned long) host; host->id = pdev->id; - host->res = r; + host->mem_res = res; host->irq = irq; if (cpu_is_omap24xx()) { host->iclk = clk_get(&pdev->dev, "mmc_ick"); if (IS_ERR(host->iclk)) - goto out; + goto err_free_mmc_host; clk_enable(host->iclk); } @@ -1018,7 +1064,7 @@ static int __init mmc_omap_probe(struct platform_device *pdev) if (IS_ERR(host->fclk)) { ret = PTR_ERR(host->fclk); - goto out; + goto err_free_iclk; } /* REVISIT: @@ -1031,14 +1077,15 @@ static int __init mmc_omap_probe(struct platform_device *pdev) host->use_dma = 1; host->dma_ch = -1; - host->irq = pdev->resource[1].start; - host->base = (void __iomem*)IO_ADDRESS(r->start); + host->irq = irq; + host->phys_base = host->mem_res->start; + host->virt_base = (void __iomem *) IO_ADDRESS(host->phys_base); mmc->ops = &mmc_omap_ops; mmc->f_min = 400000; mmc->f_max = 24000000; - mmc->ocr_avail = MMC_VDD_32_33|MMC_VDD_33_34; - mmc->caps = MMC_CAP_BYTEBLOCK; + mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; + mmc->caps = MMC_CAP_MULTIWRITE | MMC_CAP_BYTEBLOCK; if (minfo->wire4) mmc->caps |= MMC_CAP_4_BIT_DATA; @@ -1056,20 +1103,18 @@ static int __init mmc_omap_probe(struct platform_device *pdev) if ((ret = omap_request_gpio(host->power_pin)) != 0) { dev_err(mmc_dev(host->mmc), "Unable to get GPIO pin for MMC power\n"); - goto out; + goto err_free_fclk; } omap_set_gpio_direction(host->power_pin, 0); } ret = request_irq(host->irq, mmc_omap_irq, 0, DRIVER_NAME, host); if (ret) - goto out; + goto err_free_power_gpio; host->dev = &pdev->dev; platform_set_drvdata(pdev, host); - mmc_add_host(mmc); - if (host->switch_pin >= 0) { INIT_WORK(&host->switch_work, mmc_omap_switch_handler, host); init_timer(&host->switch_timer); @@ -1107,10 +1152,11 @@ static int __init mmc_omap_probe(struct platform_device *pdev) schedule_work(&host->switch_work); } -no_switch: + mmc_add_host(mmc); + return 0; -out: +no_switch: /* FIXME: Free other resources too. */ if (host) { if (host->iclk && !IS_ERR(host->iclk)) @@ -1119,6 +1165,20 @@ out: clk_put(host->fclk); mmc_free_host(host->mmc); } +err_free_power_gpio: + if (host->power_pin >= 0) + omap_free_gpio(host->power_pin); +err_free_fclk: + clk_put(host->fclk); +err_free_iclk: + if (host->iclk != NULL) { + clk_disable(host->iclk); + clk_put(host->iclk); + } +err_free_mmc_host: + mmc_free_host(host->mmc); +err_free_mem_region: + release_mem_region(res->start, res->end - res->start + 1); return ret; } @@ -1128,30 +1188,31 @@ static int mmc_omap_remove(struct platform_device *pdev) platform_set_drvdata(pdev, NULL); - if (host) { - mmc_remove_host(host->mmc); - free_irq(host->irq, host); - - if (host->power_pin >= 0) - omap_free_gpio(host->power_pin); - if (host->switch_pin >= 0) { - device_remove_file(&pdev->dev, &dev_attr_enable_poll); - device_remove_file(&pdev->dev, &dev_attr_cover_switch); - free_irq(OMAP_GPIO_IRQ(host->switch_pin), host); - omap_free_gpio(host->switch_pin); - host->switch_pin = -1; - del_timer_sync(&host->switch_timer); - flush_scheduled_work(); - } - if (host->iclk && !IS_ERR(host->iclk)) - clk_put(host->iclk); - if (host->fclk && !IS_ERR(host->fclk)) - clk_put(host->fclk); - mmc_free_host(host->mmc); + BUG_ON(host == NULL); + + mmc_remove_host(host->mmc); + free_irq(host->irq, host); + + if (host->power_pin >= 0) + omap_free_gpio(host->power_pin); + if (host->switch_pin >= 0) { + device_remove_file(&pdev->dev, &dev_attr_enable_poll); + device_remove_file(&pdev->dev, &dev_attr_cover_switch); + free_irq(OMAP_GPIO_IRQ(host->switch_pin), host); + omap_free_gpio(host->switch_pin); + host->switch_pin = -1; + del_timer_sync(&host->switch_timer); + flush_scheduled_work(); } + if (host->iclk && !IS_ERR(host->iclk)) + clk_put(host->iclk); + if (host->fclk && !IS_ERR(host->fclk)) + clk_put(host->fclk); release_mem_region(pdev->resource[0].start, - pdev->resource[0].end - pdev->resource[0].start + 1); + pdev->resource[0].end - pdev->resource[0].start + 1); + + mmc_free_host(host->mmc); return 0; } diff --git a/drivers/mmc/omap.h b/drivers/mmc/omap.h deleted file mode 100644 index c954d355a5e..00000000000 --- a/drivers/mmc/omap.h +++ /dev/null @@ -1,55 +0,0 @@ -#ifndef DRIVERS_MEDIA_MMC_OMAP_H -#define DRIVERS_MEDIA_MMC_OMAP_H - -#define OMAP_MMC_REG_CMD 0x00 -#define OMAP_MMC_REG_ARGL 0x04 -#define OMAP_MMC_REG_ARGH 0x08 -#define OMAP_MMC_REG_CON 0x0c -#define OMAP_MMC_REG_STAT 0x10 -#define OMAP_MMC_REG_IE 0x14 -#define OMAP_MMC_REG_CTO 0x18 -#define OMAP_MMC_REG_DTO 0x1c -#define OMAP_MMC_REG_DATA 0x20 -#define OMAP_MMC_REG_BLEN 0x24 -#define OMAP_MMC_REG_NBLK 0x28 -#define OMAP_MMC_REG_BUF 0x2c -#define OMAP_MMC_REG_SDIO 0x34 -#define OMAP_MMC_REG_REV 0x3c -#define OMAP_MMC_REG_RSP0 0x40 -#define OMAP_MMC_REG_RSP1 0x44 -#define OMAP_MMC_REG_RSP2 0x48 -#define OMAP_MMC_REG_RSP3 0x4c -#define OMAP_MMC_REG_RSP4 0x50 -#define OMAP_MMC_REG_RSP5 0x54 -#define OMAP_MMC_REG_RSP6 0x58 -#define OMAP_MMC_REG_RSP7 0x5c -#define OMAP_MMC_REG_IOSR 0x60 -#define OMAP_MMC_REG_SYSC 0x64 -#define OMAP_MMC_REG_SYSS 0x68 - -#define OMAP_MMC_STAT_CARD_ERR (1 << 14) -#define OMAP_MMC_STAT_CARD_IRQ (1 << 13) -#define OMAP_MMC_STAT_OCR_BUSY (1 << 12) -#define OMAP_MMC_STAT_A_EMPTY (1 << 11) -#define OMAP_MMC_STAT_A_FULL (1 << 10) -#define OMAP_MMC_STAT_CMD_CRC (1 << 8) -#define OMAP_MMC_STAT_CMD_TOUT (1 << 7) -#define OMAP_MMC_STAT_DATA_CRC (1 << 6) -#define OMAP_MMC_STAT_DATA_TOUT (1 << 5) -#define OMAP_MMC_STAT_END_BUSY (1 << 4) -#define OMAP_MMC_STAT_END_OF_DATA (1 << 3) -#define OMAP_MMC_STAT_CARD_BUSY (1 << 2) -#define OMAP_MMC_STAT_END_OF_CMD (1 << 0) - -#define OMAP_MMC_READ(base, reg) __raw_readw((base) + OMAP_MMC_REG_##reg) -#define OMAP_MMC_WRITE(base, reg, val) __raw_writew((val), (base) + OMAP_MMC_REG_##reg) - -/* - * Command types - */ -#define OMAP_MMC_CMDTYPE_BC 0 -#define OMAP_MMC_CMDTYPE_BCR 1 -#define OMAP_MMC_CMDTYPE_AC 2 -#define OMAP_MMC_CMDTYPE_ADTC 3 - -#endif diff --git a/drivers/mmc/pxamci.c b/drivers/mmc/pxamci.c index a526698b8c9..471e9f4e053 100644 --- a/drivers/mmc/pxamci.c +++ b/drivers/mmc/pxamci.c @@ -393,7 +393,7 @@ static void pxamci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) host->clkrt, host->cmdat); } -static struct mmc_host_ops pxamci_ops = { +static const struct mmc_host_ops pxamci_ops = { .request = pxamci_request, .get_ro = pxamci_get_ro, .set_ios = pxamci_set_ios, diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c index 9a7d39b7cdb..cd98117632d 100644 --- a/drivers/mmc/sdhci.c +++ b/drivers/mmc/sdhci.c @@ -616,6 +616,7 @@ static void sdhci_finish_command(struct sdhci_host *host) static void sdhci_set_clock(struct sdhci_host *host, unsigned int clock) { int div; + u8 ctrl; u16 clk; unsigned long timeout; @@ -624,6 +625,13 @@ static void sdhci_set_clock(struct sdhci_host *host, unsigned int clock) writew(0, host->ioaddr + SDHCI_CLOCK_CONTROL); + ctrl = readb(host->ioaddr + SDHCI_HOST_CONTROL); + if (clock > 25000000) + ctrl |= SDHCI_CTRL_HISPD; + else + ctrl &= ~SDHCI_CTRL_HISPD; + writeb(ctrl, host->ioaddr + SDHCI_HOST_CONTROL); + if (clock == 0) goto out; @@ -784,7 +792,7 @@ static int sdhci_get_ro(struct mmc_host *mmc) return !(present & SDHCI_WRITE_PROTECT); } -static struct mmc_host_ops sdhci_ops = { +static const struct mmc_host_ops sdhci_ops = { .request = sdhci_request, .set_ios = sdhci_set_ios, .get_ro = sdhci_get_ro, @@ -1291,6 +1299,13 @@ static int __devinit sdhci_probe_slot(struct pci_dev *pdev, int slot) else if (caps & SDHCI_CAN_VDD_180) mmc->ocr_avail |= MMC_VDD_17_18|MMC_VDD_18_19; + if ((host->max_clk > 25000000) && !(caps & SDHCI_CAN_DO_HISPD)) { + printk(KERN_ERR "%s: Controller reports > 25 MHz base clock," + " but no high speed support.\n", + host->slot_descr); + mmc->f_max = 25000000; + } + if (mmc->ocr_avail == 0) { printk(KERN_ERR "%s: Hardware doesn't report any " "support voltages.\n", host->slot_descr); diff --git a/drivers/mmc/sdhci.h b/drivers/mmc/sdhci.h index 72a67937afe..f9d1a0a6f03 100644 --- a/drivers/mmc/sdhci.h +++ b/drivers/mmc/sdhci.h @@ -71,6 +71,7 @@ #define SDHCI_HOST_CONTROL 0x28 #define SDHCI_CTRL_LED 0x01 #define SDHCI_CTRL_4BITBUS 0x02 +#define SDHCI_CTRL_HISPD 0x04 #define SDHCI_POWER_CONTROL 0x29 #define SDHCI_POWER_ON 0x01 @@ -138,6 +139,7 @@ #define SDHCI_CLOCK_BASE_SHIFT 8 #define SDHCI_MAX_BLOCK_MASK 0x00030000 #define SDHCI_MAX_BLOCK_SHIFT 16 +#define SDHCI_CAN_DO_HISPD 0x00200000 #define SDHCI_CAN_DO_DMA 0x00400000 #define SDHCI_CAN_VDD_330 0x01000000 #define SDHCI_CAN_VDD_300 0x02000000 diff --git a/drivers/mmc/wbsd.c b/drivers/mmc/wbsd.c index ced309b37a8..7a282672f8e 100644 --- a/drivers/mmc/wbsd.c +++ b/drivers/mmc/wbsd.c @@ -1021,7 +1021,7 @@ static int wbsd_get_ro(struct mmc_host *mmc) return csr & WBSD_WRPT; } -static struct mmc_host_ops wbsd_ops = { +static const struct mmc_host_ops wbsd_ops = { .request = wbsd_request, .set_ios = wbsd_set_ios, .get_ro = wbsd_get_ro, @@ -1488,7 +1488,7 @@ static void __devinit wbsd_request_dma(struct wbsd_host *host, int dma) /* * Translate the address to a physical address. */ - host->dma_addr = dma_map_single(host->mmc->dev, host->dma_buffer, + host->dma_addr = dma_map_single(mmc_dev(host->mmc), host->dma_buffer, WBSD_DMA_SIZE, DMA_BIDIRECTIONAL); /* @@ -1512,7 +1512,7 @@ kfree: */ BUG_ON(1); - dma_unmap_single(host->mmc->dev, host->dma_addr, + dma_unmap_single(mmc_dev(host->mmc), host->dma_addr, WBSD_DMA_SIZE, DMA_BIDIRECTIONAL); host->dma_addr = (dma_addr_t)NULL; @@ -1530,7 +1530,7 @@ err: static void __devexit wbsd_release_dma(struct wbsd_host *host) { if (host->dma_addr) { - dma_unmap_single(host->mmc->dev, host->dma_addr, + dma_unmap_single(mmc_dev(host->mmc), host->dma_addr, WBSD_DMA_SIZE, DMA_BIDIRECTIONAL); } kfree(host->dma_buffer); diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c index 7ea49a0d5ec..296159ec518 100644 --- a/drivers/mtd/chips/cfi_cmdset_0001.c +++ b/drivers/mtd/chips/cfi_cmdset_0001.c @@ -1087,7 +1087,7 @@ static int inval_cache_and_wait_for_operation( } spin_lock(chip->mutex); - if (chip->state != chip_state) { + while (chip->state != chip_state) { /* Someone's suspended the operation: sleep */ DECLARE_WAITQUEUE(wait, current); set_current_state(TASK_UNINTERRUPTIBLE); diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig index 24747bdc3e1..d132ed571f1 100644 --- a/drivers/mtd/maps/Kconfig +++ b/drivers/mtd/maps/Kconfig @@ -607,7 +607,7 @@ config MTD_BAST_MAXSIZE default "4" config MTD_SHARP_SL - bool "ROM maped on Sharp SL Series" + bool "ROM mapped on Sharp SL Series" depends on MTD && ARCH_PXA help This enables access to the flash chip on the Sharp SL Series of PDAs. diff --git a/drivers/mtd/maps/cfi_flagadm.c b/drivers/mtd/maps/cfi_flagadm.c index 92b5d883d7b..65e5ee55201 100644 --- a/drivers/mtd/maps/cfi_flagadm.c +++ b/drivers/mtd/maps/cfi_flagadm.c @@ -80,7 +80,7 @@ struct mtd_partition flagadm_parts[] = { .size = FLASH_PARTITION2_SIZE }, { - .name = "Persistant storage", + .name = "Persistent storage", .offset = FLASH_PARTITION3_ADDR, .size = FLASH_PARTITION3_SIZE } diff --git a/drivers/net/8390.c b/drivers/net/8390.c index 3d1c599ac3c..a82807641dc 100644 --- a/drivers/net/8390.c +++ b/drivers/net/8390.c @@ -1,1104 +1,40 @@ -/* 8390.c: A general NS8390 ethernet driver core for linux. */ -/* - Written 1992-94 by Donald Becker. - - Copyright 1993 United States Government as represented by the - Director, National Security Agency. - - This software may be used and distributed according to the terms - of the GNU General Public License, incorporated herein by reference. - - The author may be reached as becker@scyld.com, or C/O - Scyld Computing Corporation - 410 Severn Ave., Suite 210 - Annapolis MD 21403 - - - This is the chip-specific code for many 8390-based ethernet adaptors. - This is not a complete driver, it must be combined with board-specific - code such as ne.c, wd.c, 3c503.c, etc. - - Seeing how at least eight drivers use this code, (not counting the - PCMCIA ones either) it is easy to break some card by what seems like - a simple innocent change. Please contact me or Donald if you think - you have found something that needs changing. -- PG - - - Changelog: - - Paul Gortmaker : remove set_bit lock, other cleanups. - Paul Gortmaker : add ei_get_8390_hdr() so we can pass skb's to - ei_block_input() for eth_io_copy_and_sum(). - Paul Gortmaker : exchange static int ei_pingpong for a #define, - also add better Tx error handling. - Paul Gortmaker : rewrite Rx overrun handling as per NS specs. - Alexey Kuznetsov : use the 8390's six bit hash multicast filter. - Paul Gortmaker : tweak ANK's above multicast changes a bit. - Paul Gortmaker : update packet statistics for v2.1.x - Alan Cox : support arbitary stupid port mappings on the - 68K Macintosh. Support >16bit I/O spaces - Paul Gortmaker : add kmod support for auto-loading of the 8390 - module by all drivers that require it. - Alan Cox : Spinlocking work, added 'BUG_83C690' - Paul Gortmaker : Separate out Tx timeout code from Tx path. - Paul Gortmaker : Remove old unused single Tx buffer code. - Hayato Fujiwara : Add m32r support. - Paul Gortmaker : use skb_padto() instead of stack scratch area - - Sources: - The National Semiconductor LAN Databook, and the 3Com 3c503 databook. - - */ +/* 8390 core for usual drivers */ static const char version[] = "8390.c:v1.10cvs 9/23/94 Donald Becker (becker@cesdis.gsfc.nasa.gov)\n"; -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/jiffies.h> -#include <linux/fs.h> -#include <linux/types.h> -#include <linux/string.h> -#include <linux/bitops.h> -#include <asm/system.h> -#include <asm/uaccess.h> -#include <asm/io.h> -#include <asm/irq.h> -#include <linux/delay.h> -#include <linux/errno.h> -#include <linux/fcntl.h> -#include <linux/in.h> -#include <linux/interrupt.h> -#include <linux/init.h> -#include <linux/crc32.h> - -#include <linux/netdevice.h> -#include <linux/etherdevice.h> - -#define NS8390_CORE -#include "8390.h" - -#define BUG_83C690 - -/* These are the operational function interfaces to board-specific - routines. - void reset_8390(struct net_device *dev) - Resets the board associated with DEV, including a hardware reset of - the 8390. This is only called when there is a transmit timeout, and - it is always followed by 8390_init(). - void block_output(struct net_device *dev, int count, const unsigned char *buf, - int start_page) - Write the COUNT bytes of BUF to the packet buffer at START_PAGE. The - "page" value uses the 8390's 256-byte pages. - void get_8390_hdr(struct net_device *dev, struct e8390_hdr *hdr, int ring_page) - Read the 4 byte, page aligned 8390 header. *If* there is a - subsequent read, it will be of the rest of the packet. - void block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset) - Read COUNT bytes from the packet buffer into the skb data area. Start - reading from RING_OFFSET, the address as the 8390 sees it. This will always - follow the read of the 8390 header. -*/ -#define ei_reset_8390 (ei_local->reset_8390) -#define ei_block_output (ei_local->block_output) -#define ei_block_input (ei_local->block_input) -#define ei_get_8390_hdr (ei_local->get_8390_hdr) - -/* use 0 for production, 1 for verification, >2 for debug */ -#ifndef ei_debug -int ei_debug = 1; -#endif - -/* Index to functions. */ -static void ei_tx_intr(struct net_device *dev); -static void ei_tx_err(struct net_device *dev); -static void ei_tx_timeout(struct net_device *dev); -static void ei_receive(struct net_device *dev); -static void ei_rx_overrun(struct net_device *dev); - -/* Routines generic to NS8390-based boards. */ -static void NS8390_trigger_send(struct net_device *dev, unsigned int length, - int start_page); -static void set_multicast_list(struct net_device *dev); -static void do_set_multicast_list(struct net_device *dev); - -/* - * SMP and the 8390 setup. - * - * The 8390 isnt exactly designed to be multithreaded on RX/TX. There is - * a page register that controls bank and packet buffer access. We guard - * this with ei_local->page_lock. Nobody should assume or set the page other - * than zero when the lock is not held. Lock holders must restore page 0 - * before unlocking. Even pure readers must take the lock to protect in - * page 0. - * - * To make life difficult the chip can also be very slow. We therefore can't - * just use spinlocks. For the longer lockups we disable the irq the device - * sits on and hold the lock. We must hold the lock because there is a dual - * processor case other than interrupts (get stats/set multicast list in - * parallel with each other and transmit). - * - * Note: in theory we can just disable the irq on the card _but_ there is - * a latency on SMP irq delivery. So we can easily go "disable irq" "sync irqs" - * enter lock, take the queued irq. So we waddle instead of flying. - * - * Finally by special arrangement for the purpose of being generally - * annoying the transmit function is called bh atomic. That places - * restrictions on the user context callers as disable_irq won't save - * them. - */ - - +#include "lib8390.c" -/** - * ei_open - Open/initialize the board. - * @dev: network device to initialize - * - * This routine goes all-out, setting everything - * up anew at each open, even though many of these registers should only - * need to be set once at boot. - */ int ei_open(struct net_device *dev) { - unsigned long flags; - struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev); - - /* The card I/O part of the driver (e.g. 3c503) can hook a Tx timeout - wrapper that does e.g. media check & then calls ei_tx_timeout. */ - if (dev->tx_timeout == NULL) - dev->tx_timeout = ei_tx_timeout; - if (dev->watchdog_timeo <= 0) - dev->watchdog_timeo = TX_TIMEOUT; - - /* - * Grab the page lock so we own the register set, then call - * the init function. - */ - - spin_lock_irqsave(&ei_local->page_lock, flags); - NS8390_init(dev, 1); - /* Set the flag before we drop the lock, That way the IRQ arrives - after its set and we get no silly warnings */ - netif_start_queue(dev); - spin_unlock_irqrestore(&ei_local->page_lock, flags); - ei_local->irqlock = 0; - return 0; + return __ei_open(dev); } -/** - * ei_close - shut down network device - * @dev: network device to close - * - * Opposite of ei_open(). Only used when "ifconfig <devname> down" is done. - */ int ei_close(struct net_device *dev) { - struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev); - unsigned long flags; - - /* - * Hold the page lock during close - */ - - spin_lock_irqsave(&ei_local->page_lock, flags); - NS8390_init(dev, 0); - spin_unlock_irqrestore(&ei_local->page_lock, flags); - netif_stop_queue(dev); - return 0; -} - -/** - * ei_tx_timeout - handle transmit time out condition - * @dev: network device which has apparently fallen asleep - * - * Called by kernel when device never acknowledges a transmit has - * completed (or failed) - i.e. never posted a Tx related interrupt. - */ - -void ei_tx_timeout(struct net_device *dev) -{ - long e8390_base = dev->base_addr; - struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev); - int txsr, isr, tickssofar = jiffies - dev->trans_start; - unsigned long flags; - -#if defined(CONFIG_M32R) && defined(CONFIG_SMP) - unsigned long icucr; - - local_irq_save(flags); - icucr = inl(M32R_ICU_CR1_PORTL); - icucr |= M32R_ICUCR_ISMOD11; - outl(icucr, M32R_ICU_CR1_PORTL); - local_irq_restore(flags); -#endif - ei_local->stat.tx_errors++; - - spin_lock_irqsave(&ei_local->page_lock, flags); - txsr = inb(e8390_base+EN0_TSR); - isr = inb(e8390_base+EN0_ISR); - spin_unlock_irqrestore(&ei_local->page_lock, flags); - - printk(KERN_DEBUG "%s: Tx timed out, %s TSR=%#2x, ISR=%#2x, t=%d.\n", - dev->name, (txsr & ENTSR_ABT) ? "excess collisions." : - (isr) ? "lost interrupt?" : "cable problem?", txsr, isr, tickssofar); - - if (!isr && !ei_local->stat.tx_packets) - { - /* The 8390 probably hasn't gotten on the cable yet. */ - ei_local->interface_num ^= 1; /* Try a different xcvr. */ - } - - /* Ugly but a reset can be slow, yet must be protected */ - - disable_irq_nosync_lockdep(dev->irq); - spin_lock(&ei_local->page_lock); - - /* Try to restart the card. Perhaps the user has fixed something. */ - ei_reset_8390(dev); - NS8390_init(dev, 1); - - spin_unlock(&ei_local->page_lock); - enable_irq_lockdep(dev->irq); - netif_wake_queue(dev); -} - -/** - * ei_start_xmit - begin packet transmission - * @skb: packet to be sent - * @dev: network device to which packet is sent - * - * Sends a packet to an 8390 network device. - */ - -static int ei_start_xmit(struct sk_buff *skb, struct net_device *dev) -{ - long e8390_base = dev->base_addr; - struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev); - int send_length = skb->len, output_page; - unsigned long flags; - char buf[ETH_ZLEN]; - char *data = skb->data; - - if (skb->len < ETH_ZLEN) { - memset(buf, 0, ETH_ZLEN); /* more efficient than doing just the needed bits */ - memcpy(buf, data, skb->len); - send_length = ETH_ZLEN; - data = buf; - } - - /* Mask interrupts from the ethercard. - SMP: We have to grab the lock here otherwise the IRQ handler - on another CPU can flip window and race the IRQ mask set. We end - up trashing the mcast filter not disabling irqs if we don't lock */ - - spin_lock_irqsave(&ei_local->page_lock, flags); - outb_p(0x00, e8390_base + EN0_IMR); - spin_unlock_irqrestore(&ei_local->page_lock, flags); - - - /* - * Slow phase with lock held. - */ - - disable_irq_nosync_lockdep_irqsave(dev->irq, &flags); - - spin_lock(&ei_local->page_lock); - - ei_local->irqlock = 1; - - /* - * We have two Tx slots available for use. Find the first free - * slot, and then perform some sanity checks. With two Tx bufs, - * you get very close to transmitting back-to-back packets. With - * only one Tx buf, the transmitter sits idle while you reload the - * card, leaving a substantial gap between each transmitted packet. - */ - - if (ei_local->tx1 == 0) - { - output_page = ei_local->tx_start_page; - ei_local->tx1 = send_length; - if (ei_debug && ei_local->tx2 > 0) - printk(KERN_DEBUG "%s: idle transmitter tx2=%d, lasttx=%d, txing=%d.\n", - dev->name, ei_local->tx2, ei_local->lasttx, ei_local->txing); - } - else if (ei_local->tx2 == 0) - { - output_page = ei_local->tx_start_page + TX_PAGES/2; - ei_local->tx2 = send_length; - if (ei_debug && ei_local->tx1 > 0) - printk(KERN_DEBUG "%s: idle transmitter, tx1=%d, lasttx=%d, txing=%d.\n", - dev->name, ei_local->tx1, ei_local->lasttx, ei_local->txing); - } - else - { /* We should never get here. */ - if (ei_debug) - printk(KERN_DEBUG "%s: No Tx buffers free! tx1=%d tx2=%d last=%d\n", - dev->name, ei_local->tx1, ei_local->tx2, ei_local->lasttx); - ei_local->irqlock = 0; - netif_stop_queue(dev); - outb_p(ENISR_ALL, e8390_base + EN0_IMR); - spin_unlock(&ei_local->page_lock); - enable_irq_lockdep_irqrestore(dev->irq, &flags); - ei_local->stat.tx_errors++; - return 1; - } - - /* - * Okay, now upload the packet and trigger a send if the transmitter - * isn't already sending. If it is busy, the interrupt handler will - * trigger the send later, upon receiving a Tx done interrupt. - */ - - ei_block_output(dev, send_length, data, output_page); - - if (! ei_local->txing) - { - ei_local->txing = 1; - NS8390_trigger_send(dev, send_length, output_page); - dev->trans_start = jiffies; - if (output_page == ei_local->tx_start_page) - { - ei_local->tx1 = -1; - ei_local->lasttx = -1; - } - else - { - ei_local->tx2 = -1; - ei_local->lasttx = -2; - } - } - else ei_local->txqueue++; - - if (ei_local->tx1 && ei_local->tx2) - netif_stop_queue(dev); - else - netif_start_queue(dev); - - /* Turn 8390 interrupts back on. */ - ei_local->irqlock = 0; - outb_p(ENISR_ALL, e8390_base + EN0_IMR); - - spin_unlock(&ei_local->page_lock); - enable_irq_lockdep_irqrestore(dev->irq, &flags); - - dev_kfree_skb (skb); - ei_local->stat.tx_bytes += send_length; - - return 0; + return __ei_close(dev); } -/** - * ei_interrupt - handle the interrupts from an 8390 - * @irq: interrupt number - * @dev_id: a pointer to the net_device - * - * Handle the ether interface interrupts. We pull packets from - * the 8390 via the card specific functions and fire them at the networking - * stack. We also handle transmit completions and wake the transmit path if - * necessary. We also update the counters and do other housekeeping as - * needed. - */ - irqreturn_t ei_interrupt(int irq, void *dev_id) { - struct net_device *dev = dev_id; - long e8390_base; - int interrupts, nr_serviced = 0; - struct ei_device *ei_local; - - e8390_base = dev->base_addr; - ei_local = netdev_priv(dev); - - /* - * Protect the irq test too. - */ - - spin_lock(&ei_local->page_lock); - - if (ei_local->irqlock) - { -#if 1 /* This might just be an interrupt for a PCI device sharing this line */ - /* The "irqlock" check is only for testing. */ - printk(ei_local->irqlock - ? "%s: Interrupted while interrupts are masked! isr=%#2x imr=%#2x.\n" - : "%s: Reentering the interrupt handler! isr=%#2x imr=%#2x.\n", - dev->name, inb_p(e8390_base + EN0_ISR), - inb_p(e8390_base + EN0_IMR)); -#endif - spin_unlock(&ei_local->page_lock); - return IRQ_NONE; - } - - /* Change to page 0 and read the intr status reg. */ - outb_p(E8390_NODMA+E8390_PAGE0, e8390_base + E8390_CMD); - if (ei_debug > 3) - printk(KERN_DEBUG "%s: interrupt(isr=%#2.2x).\n", dev->name, - inb_p(e8390_base + EN0_ISR)); - - /* !!Assumption!! -- we stay in page 0. Don't break this. */ - while ((interrupts = inb_p(e8390_base + EN0_ISR)) != 0 - && ++nr_serviced < MAX_SERVICE) - { - if (!netif_running(dev)) { - printk(KERN_WARNING "%s: interrupt from stopped card\n", dev->name); - /* rmk - acknowledge the interrupts */ - outb_p(interrupts, e8390_base + EN0_ISR); - interrupts = 0; - break; - } - if (interrupts & ENISR_OVER) - ei_rx_overrun(dev); - else if (interrupts & (ENISR_RX+ENISR_RX_ERR)) - { - /* Got a good (?) packet. */ - ei_receive(dev); - } - /* Push the next to-transmit packet through. */ - if (interrupts & ENISR_TX) - ei_tx_intr(dev); - else if (interrupts & ENISR_TX_ERR) - ei_tx_err(dev); - - if (interrupts & ENISR_COUNTERS) - { - ei_local->stat.rx_frame_errors += inb_p(e8390_base + EN0_COUNTER0); - ei_local->stat.rx_crc_errors += inb_p(e8390_base + EN0_COUNTER1); - ei_local->stat.rx_missed_errors+= inb_p(e8390_base + EN0_COUNTER2); - outb_p(ENISR_COUNTERS, e8390_base + EN0_ISR); /* Ack intr. */ - } - - /* Ignore any RDC interrupts that make it back to here. */ - if (interrupts & ENISR_RDC) - { - outb_p(ENISR_RDC, e8390_base + EN0_ISR); - } - - outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, e8390_base + E8390_CMD); - } - - if (interrupts && ei_debug) - { - outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, e8390_base + E8390_CMD); - if (nr_serviced >= MAX_SERVICE) - { - /* 0xFF is valid for a card removal */ - if(interrupts!=0xFF) - printk(KERN_WARNING "%s: Too much work at interrupt, status %#2.2x\n", - dev->name, interrupts); - outb_p(ENISR_ALL, e8390_base + EN0_ISR); /* Ack. most intrs. */ - } else { - printk(KERN_WARNING "%s: unknown interrupt %#2x\n", dev->name, interrupts); - outb_p(0xff, e8390_base + EN0_ISR); /* Ack. all intrs. */ - } - } - spin_unlock(&ei_local->page_lock); - return IRQ_RETVAL(nr_serviced > 0); + return __ei_interrupt(irq, dev_id); } #ifdef CONFIG_NET_POLL_CONTROLLER void ei_poll(struct net_device *dev) { - disable_irq_lockdep(dev->irq); - ei_interrupt(dev->irq, dev); - enable_irq_lockdep(dev->irq); + __ei_poll(dev); } #endif -/** - * ei_tx_err - handle transmitter error - * @dev: network device which threw the exception - * - * A transmitter error has happened. Most likely excess collisions (which - * is a fairly normal condition). If the error is one where the Tx will - * have been aborted, we try and send another one right away, instead of - * letting the failed packet sit and collect dust in the Tx buffer. This - * is a much better solution as it avoids kernel based Tx timeouts, and - * an unnecessary card reset. - * - * Called with lock held. - */ - -static void ei_tx_err(struct net_device *dev) -{ - long e8390_base = dev->base_addr; - struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev); - unsigned char txsr = inb_p(e8390_base+EN0_TSR); - unsigned char tx_was_aborted = txsr & (ENTSR_ABT+ENTSR_FU); - -#ifdef VERBOSE_ERROR_DUMP - printk(KERN_DEBUG "%s: transmitter error (%#2x): ", dev->name, txsr); - if (txsr & ENTSR_ABT) - printk("excess-collisions "); - if (txsr & ENTSR_ND) - printk("non-deferral "); - if (txsr & ENTSR_CRS) - printk("lost-carrier "); - if (txsr & ENTSR_FU) - printk("FIFO-underrun "); - if (txsr & ENTSR_CDH) - printk("lost-heartbeat "); - printk("\n"); -#endif - - outb_p(ENISR_TX_ERR, e8390_base + EN0_ISR); /* Ack intr. */ - - if (tx_was_aborted) - ei_tx_intr(dev); - else - { - ei_local->stat.tx_errors++; - if (txsr & ENTSR_CRS) ei_local->stat.tx_carrier_errors++; - if (txsr & ENTSR_CDH) ei_local->stat.tx_heartbeat_errors++; - if (txsr & ENTSR_OWC) ei_local->stat.tx_window_errors++; - } -} - -/** - * ei_tx_intr - transmit interrupt handler - * @dev: network device for which tx intr is handled - * - * We have finished a transmit: check for errors and then trigger the next - * packet to be sent. Called with lock held. - */ - -static void ei_tx_intr(struct net_device *dev) -{ - long e8390_base = dev->base_addr; - struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev); - int status = inb(e8390_base + EN0_TSR); - - outb_p(ENISR_TX, e8390_base + EN0_ISR); /* Ack intr. */ - - /* - * There are two Tx buffers, see which one finished, and trigger - * the send of another one if it exists. - */ - ei_local->txqueue--; - - if (ei_local->tx1 < 0) - { - if (ei_local->lasttx != 1 && ei_local->lasttx != -1) - printk(KERN_ERR "%s: bogus last_tx_buffer %d, tx1=%d.\n", - ei_local->name, ei_local->lasttx, ei_local->tx1); - ei_local->tx1 = 0; - if (ei_local->tx2 > 0) - { - ei_local->txing = 1; - NS8390_trigger_send(dev, ei_local->tx2, ei_local->tx_start_page + 6); - dev->trans_start = jiffies; - ei_local->tx2 = -1, - ei_local->lasttx = 2; - } - else ei_local->lasttx = 20, ei_local->txing = 0; - } - else if (ei_local->tx2 < 0) - { - if (ei_local->lasttx != 2 && ei_local->lasttx != -2) - printk("%s: bogus last_tx_buffer %d, tx2=%d.\n", - ei_local->name, ei_local->lasttx, ei_local->tx2); - ei_local->tx2 = 0; - if (ei_local->tx1 > 0) - { - ei_local->txing = 1; - NS8390_trigger_send(dev, ei_local->tx1, ei_local->tx_start_page); - dev->trans_start = jiffies; - ei_local->tx1 = -1; - ei_local->lasttx = 1; - } - else - ei_local->lasttx = 10, ei_local->txing = 0; - } -// else printk(KERN_WARNING "%s: unexpected TX-done interrupt, lasttx=%d.\n", -// dev->name, ei_local->lasttx); - - /* Minimize Tx latency: update the statistics after we restart TXing. */ - if (status & ENTSR_COL) - ei_local->stat.collisions++; - if (status & ENTSR_PTX) - ei_local->stat.tx_packets++; - else - { - ei_local->stat.tx_errors++; - if (status & ENTSR_ABT) - { - ei_local->stat.tx_aborted_errors++; - ei_local->stat.collisions += 16; - } - if (status & ENTSR_CRS) - ei_local->stat.tx_carrier_errors++; - if (status & ENTSR_FU) - ei_local->stat.tx_fifo_errors++; - if (status & ENTSR_CDH) - ei_local->stat.tx_heartbeat_errors++; - if (status & ENTSR_OWC) - ei_local->stat.tx_window_errors++; - } - netif_wake_queue(dev); -} - -/** - * ei_receive - receive some packets - * @dev: network device with which receive will be run - * - * We have a good packet(s), get it/them out of the buffers. - * Called with lock held. - */ - -static void ei_receive(struct net_device *dev) -{ - long e8390_base = dev->base_addr; - struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev); - unsigned char rxing_page, this_frame, next_frame; - unsigned short current_offset; - int rx_pkt_count = 0; - struct e8390_pkt_hdr rx_frame; - int num_rx_pages = ei_local->stop_page-ei_local->rx_start_page; - - while (++rx_pkt_count < 10) - { - int pkt_len, pkt_stat; - - /* Get the rx page (incoming packet pointer). */ - outb_p(E8390_NODMA+E8390_PAGE1, e8390_base + E8390_CMD); - rxing_page = inb_p(e8390_base + EN1_CURPAG); - outb_p(E8390_NODMA+E8390_PAGE0, e8390_base + E8390_CMD); - - /* Remove one frame from the ring. Boundary is always a page behind. */ - this_frame = inb_p(e8390_base + EN0_BOUNDARY) + 1; - if (this_frame >= ei_local->stop_page) - this_frame = ei_local->rx_start_page; - - /* Someday we'll omit the previous, iff we never get this message. - (There is at least one clone claimed to have a problem.) - - Keep quiet if it looks like a card removal. One problem here - is that some clones crash in roughly the same way. - */ - if (ei_debug > 0 && this_frame != ei_local->current_page && (this_frame!=0x0 || rxing_page!=0xFF)) - printk(KERN_ERR "%s: mismatched read page pointers %2x vs %2x.\n", - dev->name, this_frame, ei_local->current_page); - - if (this_frame == rxing_page) /* Read all the frames? */ - break; /* Done for now */ - - current_offset = this_frame << 8; - ei_get_8390_hdr(dev, &rx_frame, this_frame); - - pkt_len = rx_frame.count - sizeof(struct e8390_pkt_hdr); - pkt_stat = rx_frame.status; - - next_frame = this_frame + 1 + ((pkt_len+4)>>8); - - /* Check for bogosity warned by 3c503 book: the status byte is never - written. This happened a lot during testing! This code should be - cleaned up someday. */ - if (rx_frame.next != next_frame - && rx_frame.next != next_frame + 1 - && rx_frame.next != next_frame - num_rx_pages - && rx_frame.next != next_frame + 1 - num_rx_pages) { - ei_local->current_page = rxing_page; - outb(ei_local->current_page-1, e8390_base+EN0_BOUNDARY); - ei_local->stat.rx_errors++; - continue; - } - - if (pkt_len < 60 || pkt_len > 1518) - { - if (ei_debug) - printk(KERN_DEBUG "%s: bogus packet size: %d, status=%#2x nxpg=%#2x.\n", - dev->name, rx_frame.count, rx_frame.status, - rx_frame.next); - ei_local->stat.rx_errors++; - ei_local->stat.rx_length_errors++; - } - else if ((pkt_stat & 0x0F) == ENRSR_RXOK) - { - struct sk_buff *skb; - - skb = dev_alloc_skb(pkt_len+2); - if (skb == NULL) - { - if (ei_debug > 1) - printk(KERN_DEBUG "%s: Couldn't allocate a sk_buff of size %d.\n", - dev->name, pkt_len); - ei_local->stat.rx_dropped++; - break; - } - else - { - skb_reserve(skb,2); /* IP headers on 16 byte boundaries */ - skb->dev = dev; - skb_put(skb, pkt_len); /* Make room */ - ei_block_input(dev, pkt_len, skb, current_offset + sizeof(rx_frame)); - skb->protocol=eth_type_trans(skb,dev); - netif_rx(skb); - dev->last_rx = jiffies; - ei_local->stat.rx_packets++; - ei_local->stat.rx_bytes += pkt_len; - if (pkt_stat & ENRSR_PHY) - ei_local->stat.multicast++; - } - } - else - { - if (ei_debug) - printk(KERN_DEBUG "%s: bogus packet: status=%#2x nxpg=%#2x size=%d\n", - dev->name, rx_frame.status, rx_frame.next, - rx_frame.count); - ei_local->stat.rx_errors++; - /* NB: The NIC counts CRC, frame and missed errors. */ - if (pkt_stat & ENRSR_FO) - ei_local->stat.rx_fifo_errors++; - } - next_frame = rx_frame.next; - - /* This _should_ never happen: it's here for avoiding bad clones. */ - if (next_frame >= ei_local->stop_page) { - printk("%s: next frame inconsistency, %#2x\n", dev->name, - next_frame); - next_frame = ei_local->rx_start_page; - } - ei_local->current_page = next_frame; - outb_p(next_frame-1, e8390_base+EN0_BOUNDARY); - } - - /* We used to also ack ENISR_OVER here, but that would sometimes mask - a real overrun, leaving the 8390 in a stopped state with rec'vr off. */ - outb_p(ENISR_RX+ENISR_RX_ERR, e8390_base+EN0_ISR); - return; -} - -/** - * ei_rx_overrun - handle receiver overrun - * @dev: network device which threw exception - * - * We have a receiver overrun: we have to kick the 8390 to get it started - * again. Problem is that you have to kick it exactly as NS prescribes in - * the updated datasheets, or "the NIC may act in an unpredictable manner." - * This includes causing "the NIC to defer indefinitely when it is stopped - * on a busy network." Ugh. - * Called with lock held. Don't call this with the interrupts off or your - * computer will hate you - it takes 10ms or so. - */ - -static void ei_rx_overrun(struct net_device *dev) -{ - long e8390_base = dev->base_addr; - unsigned char was_txing, must_resend = 0; - struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev); - - /* - * Record whether a Tx was in progress and then issue the - * stop command. - */ - was_txing = inb_p(e8390_base+E8390_CMD) & E8390_TRANS; - outb_p(E8390_NODMA+E8390_PAGE0+E8390_STOP, e8390_base+E8390_CMD); - - if (ei_debug > 1) - printk(KERN_DEBUG "%s: Receiver overrun.\n", dev->name); - ei_local->stat.rx_over_errors++; - - /* - * Wait a full Tx time (1.2ms) + some guard time, NS says 1.6ms total. - * Early datasheets said to poll the reset bit, but now they say that - * it "is not a reliable indicator and subsequently should be ignored." - * We wait at least 10ms. - */ - - mdelay(10); - - /* - * Reset RBCR[01] back to zero as per magic incantation. - */ - outb_p(0x00, e8390_base+EN0_RCNTLO); - outb_p(0x00, e8390_base+EN0_RCNTHI); - - /* - * See if any Tx was interrupted or not. According to NS, this - * step is vital, and skipping it will cause no end of havoc. - */ - - if (was_txing) - { - unsigned char tx_completed = inb_p(e8390_base+EN0_ISR) & (ENISR_TX+ENISR_TX_ERR); - if (!tx_completed) - must_resend = 1; - } - - /* - * Have to enter loopback mode and then restart the NIC before - * you are allowed to slurp packets up off the ring. - */ - outb_p(E8390_TXOFF, e8390_base + EN0_TXCR); - outb_p(E8390_NODMA + E8390_PAGE0 + E8390_START, e8390_base + E8390_CMD); - - /* - * Clear the Rx ring of all the debris, and ack the interrupt. - */ - ei_receive(dev); - outb_p(ENISR_OVER, e8390_base+EN0_ISR); - - /* - * Leave loopback mode, and resend any packet that got stopped. - */ - outb_p(E8390_TXCONFIG, e8390_base + EN0_TXCR); - if (must_resend) - outb_p(E8390_NODMA + E8390_PAGE0 + E8390_START + E8390_TRANS, e8390_base + E8390_CMD); -} - -/* - * Collect the stats. This is called unlocked and from several contexts. - */ - -static struct net_device_stats *get_stats(struct net_device *dev) -{ - long ioaddr = dev->base_addr; - struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev); - unsigned long flags; - - /* If the card is stopped, just return the present stats. */ - if (!netif_running(dev)) - return &ei_local->stat; - - spin_lock_irqsave(&ei_local->page_lock,flags); - /* Read the counter registers, assuming we are in page 0. */ - ei_local->stat.rx_frame_errors += inb_p(ioaddr + EN0_COUNTER0); - ei_local->stat.rx_crc_errors += inb_p(ioaddr + EN0_COUNTER1); - ei_local->stat.rx_missed_errors+= inb_p(ioaddr + EN0_COUNTER2); - spin_unlock_irqrestore(&ei_local->page_lock, flags); - - return &ei_local->stat; -} - -/* - * Form the 64 bit 8390 multicast table from the linked list of addresses - * associated with this dev structure. - */ - -static inline void make_mc_bits(u8 *bits, struct net_device *dev) -{ - struct dev_mc_list *dmi; - - for (dmi=dev->mc_list; dmi; dmi=dmi->next) - { - u32 crc; - if (dmi->dmi_addrlen != ETH_ALEN) - { - printk(KERN_INFO "%s: invalid multicast address length given.\n", dev->name); - continue; - } - crc = ether_crc(ETH_ALEN, dmi->dmi_addr); - /* - * The 8390 uses the 6 most significant bits of the - * CRC to index the multicast table. - */ - bits[crc>>29] |= (1<<((crc>>26)&7)); - } -} - -/** - * do_set_multicast_list - set/clear multicast filter - * @dev: net device for which multicast filter is adjusted - * - * Set or clear the multicast filter for this adaptor. May be called - * from a BH in 2.1.x. Must be called with lock held. - */ - -static void do_set_multicast_list(struct net_device *dev) -{ - long e8390_base = dev->base_addr; - int i; - struct ei_device *ei_local = (struct ei_device*)netdev_priv(dev); - - if (!(dev->flags&(IFF_PROMISC|IFF_ALLMULTI))) - { - memset(ei_local->mcfilter, 0, 8); - if (dev->mc_list) - make_mc_bits(ei_local->mcfilter, dev); - } - else - memset(ei_local->mcfilter, 0xFF, 8); /* mcast set to accept-all */ - - /* - * DP8390 manuals don't specify any magic sequence for altering - * the multicast regs on an already running card. To be safe, we - * ensure multicast mode is off prior to loading up the new hash - * table. If this proves to be not enough, we can always resort - * to stopping the NIC, loading the table and then restarting. - * - * Bug Alert! The MC regs on the SMC 83C690 (SMC Elite and SMC - * Elite16) appear to be write-only. The NS 8390 data sheet lists - * them as r/w so this is a bug. The SMC 83C790 (SMC Ultra and - * Ultra32 EISA) appears to have this bug fixed. - */ - - if (netif_running(dev)) - outb_p(E8390_RXCONFIG, e8390_base + EN0_RXCR); - outb_p(E8390_NODMA + E8390_PAGE1, e8390_base + E8390_CMD); - for(i = 0; i < 8; i++) - { - outb_p(ei_local->mcfilter[i], e8390_base + EN1_MULT_SHIFT(i)); -#ifndef BUG_83C690 - if(inb_p(e8390_base + EN1_MULT_SHIFT(i))!=ei_local->mcfilter[i]) - printk(KERN_ERR "Multicast filter read/write mismap %d\n",i); -#endif - } - outb_p(E8390_NODMA + E8390_PAGE0, e8390_base + E8390_CMD); - - if(dev->flags&IFF_PROMISC) - outb_p(E8390_RXCONFIG | 0x18, e8390_base + EN0_RXCR); - else if(dev->flags&IFF_ALLMULTI || dev->mc_list) - outb_p(E8390_RXCONFIG | 0x08, e8390_base + EN0_RXCR); - else - outb_p(E8390_RXCONFIG, e8390_base + EN0_RXCR); - } - -/* - * Called without lock held. This is invoked from user context and may - * be parallel to just about everything else. Its also fairly quick and - * not called too often. Must protect against both bh and irq users - */ - -static void set_multicast_list(struct net_device *dev) -{ - unsigned long flags; - struct ei_device *ei_local = (struct ei_device*)netdev_priv(dev); - - spin_lock_irqsave(&ei_local->page_lock, flags); - do_set_multicast_list(dev); - spin_unlock_irqrestore(&ei_local->page_lock, flags); -} - -/** - * ethdev_setup - init rest of 8390 device struct - * @dev: network device structure to init - * - * Initialize the rest of the 8390 device structure. Do NOT __init - * this, as it is used by 8390 based modular drivers too. - */ - -static void ethdev_setup(struct net_device *dev) -{ - struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev); - if (ei_debug > 1) - printk(version); - - dev->hard_start_xmit = &ei_start_xmit; - dev->get_stats = get_stats; - dev->set_multicast_list = &set_multicast_list; - - ether_setup(dev); - - spin_lock_init(&ei_local->page_lock); -} - -/** - * alloc_ei_netdev - alloc_etherdev counterpart for 8390 - * @size: extra bytes to allocate - * - * Allocate 8390-specific net_device. - */ struct net_device *__alloc_ei_netdev(int size) { - return alloc_netdev(sizeof(struct ei_device) + size, "eth%d", - ethdev_setup); + return ____alloc_ei_netdev(size); } - - - -/* This page of functions should be 8390 generic */ -/* Follow National Semi's recommendations for initializing the "NIC". */ - -/** - * NS8390_init - initialize 8390 hardware - * @dev: network device to initialize - * @startp: boolean. non-zero value to initiate chip processing - * - * Must be called with lock held. - */ - void NS8390_init(struct net_device *dev, int startp) { - long e8390_base = dev->base_addr; - struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev); - int i; - int endcfg = ei_local->word16 - ? (0x48 | ENDCFG_WTS | (ei_local->bigendian ? ENDCFG_BOS : 0)) - : 0x48; - - if(sizeof(struct e8390_pkt_hdr)!=4) - panic("8390.c: header struct mispacked\n"); - /* Follow National Semi's recommendations for initing the DP83902. */ - outb_p(E8390_NODMA+E8390_PAGE0+E8390_STOP, e8390_base+E8390_CMD); /* 0x21 */ - outb_p(endcfg, e8390_base + EN0_DCFG); /* 0x48 or 0x49 */ - /* Clear the remote byte count registers. */ - outb_p(0x00, e8390_base + EN0_RCNTLO); - outb_p(0x00, e8390_base + EN0_RCNTHI); - /* Set to monitor and loopback mode -- this is vital!. */ - outb_p(E8390_RXOFF, e8390_base + EN0_RXCR); /* 0x20 */ - outb_p(E8390_TXOFF, e8390_base + EN0_TXCR); /* 0x02 */ - /* Set the transmit page and receive ring. */ - outb_p(ei_local->tx_start_page, e8390_base + EN0_TPSR); - ei_local->tx1 = ei_local->tx2 = 0; - outb_p(ei_local->rx_start_page, e8390_base + EN0_STARTPG); - outb_p(ei_local->stop_page-1, e8390_base + EN0_BOUNDARY); /* 3c503 says 0x3f,NS0x26*/ - ei_local->current_page = ei_local->rx_start_page; /* assert boundary+1 */ - outb_p(ei_local->stop_page, e8390_base + EN0_STOPPG); - /* Clear the pending interrupts and mask. */ - outb_p(0xFF, e8390_base + EN0_ISR); - outb_p(0x00, e8390_base + EN0_IMR); - - /* Copy the station address into the DS8390 registers. */ - - outb_p(E8390_NODMA + E8390_PAGE1 + E8390_STOP, e8390_base+E8390_CMD); /* 0x61 */ - for(i = 0; i < 6; i++) - { - outb_p(dev->dev_addr[i], e8390_base + EN1_PHYS_SHIFT(i)); - if (ei_debug > 1 && inb_p(e8390_base + EN1_PHYS_SHIFT(i))!=dev->dev_addr[i]) - printk(KERN_ERR "Hw. address read/write mismap %d\n",i); - } - - outb_p(ei_local->rx_start_page, e8390_base + EN1_CURPAG); - outb_p(E8390_NODMA+E8390_PAGE0+E8390_STOP, e8390_base+E8390_CMD); - - netif_start_queue(dev); - ei_local->tx1 = ei_local->tx2 = 0; - ei_local->txing = 0; - - if (startp) - { - outb_p(0xff, e8390_base + EN0_ISR); - outb_p(ENISR_ALL, e8390_base + EN0_IMR); - outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, e8390_base+E8390_CMD); - outb_p(E8390_TXCONFIG, e8390_base + EN0_TXCR); /* xmit on. */ - /* 3c503 TechMan says rxconfig only after the NIC is started. */ - outb_p(E8390_RXCONFIG, e8390_base + EN0_RXCR); /* rx on, */ - do_set_multicast_list(dev); /* (re)load the mcast table */ - } -} - -/* Trigger a transmit start, assuming the length is valid. - Always called with the page lock held */ - -static void NS8390_trigger_send(struct net_device *dev, unsigned int length, - int start_page) -{ - long e8390_base = dev->base_addr; - struct ei_device *ei_local __attribute((unused)) = (struct ei_device *) netdev_priv(dev); - - outb_p(E8390_NODMA+E8390_PAGE0, e8390_base+E8390_CMD); - - if (inb_p(e8390_base + E8390_CMD) & E8390_TRANS) - { - printk(KERN_WARNING "%s: trigger_send() called with the transmitter busy.\n", - dev->name); - return; - } - outb_p(length & 0xff, e8390_base + EN0_TCNTLO); - outb_p(length >> 8, e8390_base + EN0_TCNTHI); - outb_p(start_page, e8390_base + EN0_TPSR); - outb_p(E8390_NODMA+E8390_TRANS+E8390_START, e8390_base+E8390_CMD); + return __NS8390_init(dev, startp); } EXPORT_SYMBOL(ei_open); diff --git a/drivers/net/8390.h b/drivers/net/8390.h index f44f1220b3a..414de5bd228 100644 --- a/drivers/net/8390.h +++ b/drivers/net/8390.h @@ -107,35 +107,14 @@ struct ei_device { * - removed AMIGA_PCMCIA from this list, handled as ISA io now */ -#if defined(CONFIG_MAC) || \ - defined(CONFIG_ZORRO8390) || defined(CONFIG_ZORRO8390_MODULE) || \ - defined(CONFIG_HYDRA) || defined(CONFIG_HYDRA_MODULE) -#define EI_SHIFT(x) (ei_local->reg_offset[x]) -#undef inb -#undef inb_p -#undef outb -#undef outb_p - -#define inb(port) in_8(port) -#define outb(val,port) out_8(port,val) -#define inb_p(port) in_8(port) -#define outb_p(val,port) out_8(port,val) - -#elif defined(CONFIG_ARM_ETHERH) || defined(CONFIG_ARM_ETHERH_MODULE) -#define EI_SHIFT(x) (ei_local->reg_offset[x]) -#undef inb -#undef inb_p -#undef outb -#undef outb_p - -#define inb(_p) readb(_p) -#define outb(_v,_p) writeb(_v,_p) -#define inb_p(_p) inb(_p) -#define outb_p(_v,_p) outb(_v,_p) - -#elif defined(CONFIG_NE_H8300) || defined(CONFIG_NE_H8300_MODULE) -#define EI_SHIFT(x) (ei_local->reg_offset[x]) -#else +#ifndef ei_inb +#define ei_inb(_p) inb(_p) +#define ei_outb(_v,_p) outb(_v,_p) +#define ei_inb_p(_p) inb_p(_p) +#define ei_outb_p(_v,_p) outb_p(_v,_p) +#endif + +#ifndef EI_SHIFT #define EI_SHIFT(x) (x) #endif diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 6e863aa9894..9de0eed6755 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -32,7 +32,7 @@ config IFB tristate "Intermediate Functional Block support" depends on NET_CLS_ACT ---help--- - This is an intermidiate driver that allows sharing of + This is an intermediate driver that allows sharing of resources. To compile this driver as a module, choose M here: the module will be called ifb. If you want to use more than one ifb @@ -188,6 +188,17 @@ config MII or internal device. It is safe to say Y or M here even if your ethernet card lack MII. +config MACB + tristate "Atmel MACB support" + depends on NET_ETHERNET && AVR32 + select MII + help + The Atmel MACB ethernet interface is found on many AT32 and AT91 + parts. Say Y to include support for the MACB chip. + + To compile this driver as a module, choose M here: the module + will be called macb. + source "drivers/net/arm/Kconfig" config MACE @@ -1769,8 +1780,8 @@ config VIA_RHINE_NAPI information. config LAN_SAA9730 - bool "Philips SAA9730 Ethernet support (EXPERIMENTAL)" - depends on NET_PCI && EXPERIMENTAL && MIPS + bool "Philips SAA9730 Ethernet support" + depends on NET_PCI && PCI && MIPS_ATLAS help The SAA9730 is a combined multimedia and peripheral controller used in thin clients, Internet access terminals, and diskless @@ -2136,7 +2147,7 @@ config SK98LIN This driver supports the original Yukon chipset. A cleaner driver is also available (skge) which seems to work better than this one. - This driver does not support the newer Yukon2 chipset. A seperate + This driver does not support the newer Yukon2 chipset. A separate driver, sky2, is provided to support Yukon2-based adapters. The following adapters are supported by this driver: @@ -2251,6 +2262,14 @@ config SPIDER_NET This driver supports the Gigabit Ethernet chips present on the Cell Processor-Based Blades from IBM. +config TSI108_ETH + tristate "Tundra TSI108 gigabit Ethernet support" + depends on TSI108_BRIDGE + help + This driver supports Tundra TSI108 gigabit Ethernet ports. + To compile this driver as a module, choose M here: the module + will be called tsi108_eth. + config GIANFAR tristate "Gianfar Ethernet" depends on 85xx || 83xx || PPC_86xx @@ -2341,10 +2360,11 @@ menu "Ethernet (10000 Mbit)" config CHELSIO_T1 tristate "Chelsio 10Gb Ethernet support" depends on PCI + select CRC32 help - This driver supports Chelsio N110 and N210 models 10Gb Ethernet - cards. More information about adapter features and performance - tuning is in <file:Documentation/networking/cxgb.txt>. + This driver supports Chelsio gigabit and 10-gigabit + Ethernet cards. More information about adapter features and + performance tuning is in <file:Documentation/networking/cxgb.txt>. For general information about Chelsio and our products, visit our website at <http://www.chelsio.com>. @@ -2357,6 +2377,13 @@ config CHELSIO_T1 To compile this driver as a module, choose M here: the module will be called cxgb. +config CHELSIO_T1_1G + bool "Chelsio gigabit Ethernet support" + depends on CHELSIO_T1 + help + Enables support for Chelsio's gigabit Ethernet PCI cards. If you + are using only 10G cards say 'N' here. + config EHEA tristate "eHEA Ethernet support" depends on IBMEBUS @@ -2447,6 +2474,12 @@ config MYRI10GE <file:Documentation/networking/net-modules.txt>. The module will be called myri10ge. +config NETXEN_NIC + tristate "NetXen Multi port (1/10) Gigabit Ethernet NIC" + depends on PCI + help + This enables the support for NetXen's Gigabit Ethernet card. + endmenu source "drivers/net/tokenring/Kconfig" diff --git a/drivers/net/Makefile b/drivers/net/Makefile index f270bc49e57..4c0d4e5ce42 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -82,7 +82,7 @@ obj-$(CONFIG_HAMACHI) += hamachi.o obj-$(CONFIG_NET) += Space.o loopback.o obj-$(CONFIG_SEEQ8005) += seeq8005.o obj-$(CONFIG_NET_SB1000) += sb1000.o -obj-$(CONFIG_MAC8390) += mac8390.o 8390.o +obj-$(CONFIG_MAC8390) += mac8390.o obj-$(CONFIG_APNE) += apne.o 8390.o obj-$(CONFIG_PCMCIA_PCNET) += 8390.o obj-$(CONFIG_SHAPER) += shaper.o @@ -90,7 +90,6 @@ obj-$(CONFIG_HP100) += hp100.o obj-$(CONFIG_SMC9194) += smc9194.o obj-$(CONFIG_FEC) += fec.o obj-$(CONFIG_68360_ENET) += 68360enet.o -obj-$(CONFIG_ARM_ETHERH) += 8390.o obj-$(CONFIG_WD80x3) += wd.o 8390.o obj-$(CONFIG_EL2) += 3c503.o 8390.o obj-$(CONFIG_NE2000) += ne.o 8390.o @@ -107,8 +106,9 @@ obj-$(CONFIG_NE3210) += ne3210.o 8390.o obj-$(CONFIG_NET_SB1250_MAC) += sb1250-mac.o obj-$(CONFIG_B44) += b44.o obj-$(CONFIG_FORCEDETH) += forcedeth.o -obj-$(CONFIG_NE_H8300) += ne-h8300.o 8390.o +obj-$(CONFIG_NE_H8300) += ne-h8300.o +obj-$(CONFIG_TSI108_ETH) += tsi108_eth.o obj-$(CONFIG_MV643XX_ETH) += mv643xx_eth.o obj-$(CONFIG_QLA3XXX) += qla3xxx.o @@ -165,7 +165,7 @@ obj-$(CONFIG_BVME6000_NET) += 82596.o obj-$(CONFIG_LP486E) += lp486e.o obj-$(CONFIG_ETH16I) += eth16i.o -obj-$(CONFIG_ZORRO8390) += zorro8390.o 8390.o +obj-$(CONFIG_ZORRO8390) += zorro8390.o obj-$(CONFIG_HPLANCE) += hplance.o 7990.o obj-$(CONFIG_MVME147_NET) += mvme147.o 7990.o obj-$(CONFIG_EQUALIZER) += eql.o @@ -178,7 +178,7 @@ obj-$(CONFIG_ATARILANCE) += atarilance.o obj-$(CONFIG_ATARI_BIONET) += atari_bionet.o obj-$(CONFIG_ATARI_PAMSNET) += atari_pamsnet.o obj-$(CONFIG_A2065) += a2065.o -obj-$(CONFIG_HYDRA) += hydra.o 8390.o +obj-$(CONFIG_HYDRA) += hydra.o obj-$(CONFIG_ARIADNE) += ariadne.o obj-$(CONFIG_CS89x0) += cs89x0.o obj-$(CONFIG_MACSONIC) += macsonic.o @@ -197,6 +197,8 @@ obj-$(CONFIG_SMC911X) += smc911x.o obj-$(CONFIG_DM9000) += dm9000.o obj-$(CONFIG_FEC_8XX) += fec_8xx/ +obj-$(CONFIG_MACB) += macb.o + obj-$(CONFIG_ARM) += arm/ obj-$(CONFIG_DEV_APPLETALK) += appletalk/ obj-$(CONFIG_TR) += tokenring/ @@ -214,3 +216,4 @@ obj-$(CONFIG_NETCONSOLE) += netconsole.o obj-$(CONFIG_FS_ENET) += fs_enet/ +obj-$(CONFIG_NETXEN_NIC) += netxen/ diff --git a/drivers/net/Space.c b/drivers/net/Space.c index a67f5efc983..602ed31a5dd 100644 --- a/drivers/net/Space.c +++ b/drivers/net/Space.c @@ -33,7 +33,6 @@ #include <linux/errno.h> #include <linux/init.h> #include <linux/netlink.h> -#include <linux/divert.h> /* A unified ethernet device probe. This is the easiest way to have every ethernet adaptor have the name "eth[0123...]". diff --git a/drivers/net/amd8111e.c b/drivers/net/amd8111e.c index ef65e5917c8..18896f24d40 100644 --- a/drivers/net/amd8111e.c +++ b/drivers/net/amd8111e.c @@ -1490,32 +1490,7 @@ static void amd8111e_read_regs(struct amd8111e_priv *lp, u32 *buf) buf[12] = readl(mmio + STAT0); } -/* -amd8111e crc generator implementation is different from the kernel -ether_crc() function. -*/ -static int amd8111e_ether_crc(int len, char* mac_addr) -{ - int i,byte; - unsigned char octet; - u32 crc= INITCRC; - - for(byte=0; byte < len; byte++){ - octet = mac_addr[byte]; - for( i=0;i < 8; i++){ - /*If the next bit form the input stream is 1,subtract the divisor (CRC32) from the dividend(crc).*/ - if( (octet & 0x1) ^ (crc & 0x1) ){ - crc >>= 1; - crc ^= CRC32; - } - else - crc >>= 1; - octet >>= 1; - } - } - return crc; -} /* This function sets promiscuos mode, all-multi mode or the multicast address list to the device. @@ -1556,7 +1531,7 @@ static void amd8111e_set_multicast_list(struct net_device *dev) mc_filter[1] = mc_filter[0] = 0; for (i = 0, mc_ptr = dev->mc_list; mc_ptr && i < dev->mc_count; i++, mc_ptr = mc_ptr->next) { - bit_num = ( amd8111e_ether_crc(ETH_ALEN,mc_ptr->dmi_addr) >> 26 ) & 0x3f; + bit_num = (ether_crc_le(ETH_ALEN, mc_ptr->dmi_addr) >> 26) & 0x3f; mc_filter[bit_num >> 5] |= 1 << (bit_num & 31); } amd8111e_writeq(*(u64*)mc_filter,lp->mmio+ LADRF); diff --git a/drivers/net/amd8111e.h b/drivers/net/amd8111e.h index 7727d328f65..2007510c4eb 100644 --- a/drivers/net/amd8111e.h +++ b/drivers/net/amd8111e.h @@ -651,10 +651,6 @@ typedef enum { /* driver ioctl parameters */ #define AMD8111E_REG_DUMP_LEN 13*sizeof(u32) -/* crc generator constants */ -#define CRC32 0xedb88320 -#define INITCRC 0xFFFFFFFF - /* amd8111e desriptor format */ struct amd8111e_tx_dr{ diff --git a/drivers/net/arm/etherh.c b/drivers/net/arm/etherh.c index 4ae98970b28..f3faa4fe58e 100644 --- a/drivers/net/arm/etherh.c +++ b/drivers/net/arm/etherh.c @@ -52,7 +52,12 @@ #include <asm/ecard.h> #include <asm/io.h> -#include "../8390.h" +#define EI_SHIFT(x) (ei_local->reg_offset[x]) + +#define ei_inb(_p) readb((void __iomem *)_p) +#define ei_outb(_v,_p) writeb(_v,(void __iomem *)_p) +#define ei_inb_p(_p) readb((void __iomem *)_p) +#define ei_outb_p(_v,_p) writeb(_v,(void __iomem *)_p) #define NET_DEBUG 0 #define DEBUG_INIT 2 @@ -60,6 +65,11 @@ #define DRV_NAME "etherh" #define DRV_VERSION "1.11" +static char version[] __initdata = + "EtherH/EtherM Driver (c) 2002-2004 Russell King " DRV_VERSION "\n"; + +#include "../lib8390.c" + static unsigned int net_debug = NET_DEBUG; struct etherh_priv { @@ -87,9 +97,6 @@ MODULE_AUTHOR("Russell King"); MODULE_DESCRIPTION("EtherH/EtherM driver"); MODULE_LICENSE("GPL"); -static char version[] __initdata = - "EtherH/EtherM Driver (c) 2002-2004 Russell King " DRV_VERSION "\n"; - #define ETHERH500_DATAPORT 0x800 /* MEMC */ #define ETHERH500_NS8390 0x000 /* MEMC */ #define ETHERH500_CTRLPORT 0x800 /* IOC */ @@ -177,7 +184,7 @@ etherh_setif(struct net_device *dev) switch (etherh_priv(dev)->id) { case PROD_I3_ETHERLAN600: case PROD_I3_ETHERLAN600A: - addr = (void *)dev->base_addr + EN0_RCNTHI; + addr = (void __iomem *)dev->base_addr + EN0_RCNTHI; switch (dev->if_port) { case IF_PORT_10BASE2: @@ -218,7 +225,7 @@ etherh_getifstat(struct net_device *dev) switch (etherh_priv(dev)->id) { case PROD_I3_ETHERLAN600: case PROD_I3_ETHERLAN600A: - addr = (void *)dev->base_addr + EN0_RCNTHI; + addr = (void __iomem *)dev->base_addr + EN0_RCNTHI; switch (dev->if_port) { case IF_PORT_10BASE2: stat = 1; @@ -281,7 +288,7 @@ static void etherh_reset(struct net_device *dev) { struct ei_device *ei_local = netdev_priv(dev); - void __iomem *addr = (void *)dev->base_addr; + void __iomem *addr = (void __iomem *)dev->base_addr; writeb(E8390_NODMA+E8390_PAGE0+E8390_STOP, addr); @@ -327,7 +334,7 @@ etherh_block_output (struct net_device *dev, int count, const unsigned char *buf ei_local->dmaing = 1; - addr = (void *)dev->base_addr; + addr = (void __iomem *)dev->base_addr; dma_base = etherh_priv(dev)->dma_base; count = (count + 1) & ~1; @@ -360,7 +367,7 @@ etherh_block_output (struct net_device *dev, int count, const unsigned char *buf printk(KERN_ERR "%s: timeout waiting for TX RDC\n", dev->name); etherh_reset (dev); - NS8390_init (dev, 1); + __NS8390_init (dev, 1); break; } @@ -387,7 +394,7 @@ etherh_block_input (struct net_device *dev, int count, struct sk_buff *skb, int ei_local->dmaing = 1; - addr = (void *)dev->base_addr; + addr = (void __iomem *)dev->base_addr; dma_base = etherh_priv(dev)->dma_base; buf = skb->data; @@ -427,7 +434,7 @@ etherh_get_header (struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_p ei_local->dmaing = 1; - addr = (void *)dev->base_addr; + addr = (void __iomem *)dev->base_addr; dma_base = etherh_priv(dev)->dma_base; writeb (E8390_NODMA | E8390_PAGE0 | E8390_START, addr + E8390_CMD); @@ -465,7 +472,7 @@ etherh_open(struct net_device *dev) return -EINVAL; } - if (request_irq(dev->irq, ei_interrupt, 0, dev->name, dev)) + if (request_irq(dev->irq, __ei_interrupt, 0, dev->name, dev)) return -EAGAIN; /* @@ -491,7 +498,7 @@ etherh_open(struct net_device *dev) etherh_setif(dev); etherh_reset(dev); - ei_open(dev); + __ei_open(dev); return 0; } @@ -502,7 +509,7 @@ etherh_open(struct net_device *dev) static int etherh_close(struct net_device *dev) { - ei_close (dev); + __ei_close (dev); free_irq (dev->irq, dev); return 0; } @@ -650,7 +657,7 @@ etherh_probe(struct expansion_card *ec, const struct ecard_id *id) if (ret) goto out; - dev = __alloc_ei_netdev(sizeof(struct etherh_priv)); + dev = ____alloc_ei_netdev(sizeof(struct etherh_priv)); if (!dev) { ret = -ENOMEM; goto release; @@ -736,7 +743,7 @@ etherh_probe(struct expansion_card *ec, const struct ecard_id *id) ei_local->interface_num = 0; etherh_reset(dev); - NS8390_init(dev, 0); + __NS8390_init(dev, 0); ret = register_netdev(dev); if (ret) diff --git a/drivers/net/au1000_eth.c b/drivers/net/au1000_eth.c index 7db3c8af089..f0b6879a1c7 100644 --- a/drivers/net/au1000_eth.c +++ b/drivers/net/au1000_eth.c @@ -360,7 +360,8 @@ static int mii_probe (struct net_device *dev) BUG_ON(!phydev); BUG_ON(phydev->attached_dev); - phydev = phy_connect(dev, phydev->dev.bus_id, &au1000_adjust_link, 0); + phydev = phy_connect(dev, phydev->dev.bus_id, &au1000_adjust_link, 0, + PHY_INTERFACE_MODE_MII); if (IS_ERR(phydev)) { printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name); diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c index b12cc4596b8..5bacb7587df 100644 --- a/drivers/net/bnx2.c +++ b/drivers/net/bnx2.c @@ -53,11 +53,12 @@ #include "bnx2.h" #include "bnx2_fw.h" +#include "bnx2_fw2.h" #define DRV_MODULE_NAME "bnx2" #define PFX DRV_MODULE_NAME ": " -#define DRV_MODULE_VERSION "1.4.45" -#define DRV_MODULE_RELDATE "September 29, 2006" +#define DRV_MODULE_VERSION "1.5.1" +#define DRV_MODULE_RELDATE "November 15, 2006" #define RUN_AT(x) (jiffies + (x)) @@ -85,6 +86,7 @@ typedef enum { NC370F, BCM5708, BCM5708S, + BCM5709, } board_t; /* indexed by board_t, above */ @@ -98,6 +100,7 @@ static const struct { { "HP NC370F Multifunction Gigabit Server Adapter" }, { "Broadcom NetXtreme II BCM5708 1000Base-T" }, { "Broadcom NetXtreme II BCM5708 1000Base-SX" }, + { "Broadcom NetXtreme II BCM5709 1000Base-T" }, }; static struct pci_device_id bnx2_pci_tbl[] = { @@ -115,6 +118,8 @@ static struct pci_device_id bnx2_pci_tbl[] = { PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5706S }, { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_NX2_5708S, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5708S }, + { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_NX2_5709, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5709 }, { 0, } }; @@ -236,8 +241,23 @@ static void bnx2_ctx_wr(struct bnx2 *bp, u32 cid_addr, u32 offset, u32 val) { offset += cid_addr; - REG_WR(bp, BNX2_CTX_DATA_ADR, offset); - REG_WR(bp, BNX2_CTX_DATA, val); + if (CHIP_NUM(bp) == CHIP_NUM_5709) { + int i; + + REG_WR(bp, BNX2_CTX_CTX_DATA, val); + REG_WR(bp, BNX2_CTX_CTX_CTRL, + offset | BNX2_CTX_CTX_CTRL_WRITE_REQ); + for (i = 0; i < 5; i++) { + u32 val; + val = REG_RD(bp, BNX2_CTX_CTX_CTRL); + if ((val & BNX2_CTX_CTX_CTRL_WRITE_REQ) == 0) + break; + udelay(5); + } + } else { + REG_WR(bp, BNX2_CTX_DATA_ADR, offset); + REG_WR(bp, BNX2_CTX_DATA, val); + } } static int @@ -403,6 +423,14 @@ bnx2_free_mem(struct bnx2 *bp) { int i; + for (i = 0; i < bp->ctx_pages; i++) { + if (bp->ctx_blk[i]) { + pci_free_consistent(bp->pdev, BCM_PAGE_SIZE, + bp->ctx_blk[i], + bp->ctx_blk_mapping[i]); + bp->ctx_blk[i] = NULL; + } + } if (bp->status_blk) { pci_free_consistent(bp->pdev, bp->status_stats_size, bp->status_blk, bp->status_blk_mapping); @@ -481,6 +509,18 @@ bnx2_alloc_mem(struct bnx2 *bp) bp->stats_blk_mapping = bp->status_blk_mapping + status_blk_size; + if (CHIP_NUM(bp) == CHIP_NUM_5709) { + bp->ctx_pages = 0x2000 / BCM_PAGE_SIZE; + if (bp->ctx_pages == 0) + bp->ctx_pages = 1; + for (i = 0; i < bp->ctx_pages; i++) { + bp->ctx_blk[i] = pci_alloc_consistent(bp->pdev, + BCM_PAGE_SIZE, + &bp->ctx_blk_mapping[i]); + if (bp->ctx_blk[i] == NULL) + goto alloc_mem_err; + } + } return 0; alloc_mem_err: @@ -803,13 +843,13 @@ bnx2_set_mac_link(struct bnx2 *bp) val &= ~(BNX2_EMAC_MODE_PORT | BNX2_EMAC_MODE_HALF_DUPLEX | BNX2_EMAC_MODE_MAC_LOOP | BNX2_EMAC_MODE_FORCE_LINK | - BNX2_EMAC_MODE_25G); + BNX2_EMAC_MODE_25G_MODE); if (bp->link_up) { switch (bp->line_speed) { case SPEED_10: - if (CHIP_NUM(bp) == CHIP_NUM_5708) { - val |= BNX2_EMAC_MODE_PORT_MII_10; + if (CHIP_NUM(bp) != CHIP_NUM_5706) { + val |= BNX2_EMAC_MODE_PORT_MII_10M; break; } /* fall through */ @@ -817,7 +857,7 @@ bnx2_set_mac_link(struct bnx2 *bp) val |= BNX2_EMAC_MODE_PORT_MII; break; case SPEED_2500: - val |= BNX2_EMAC_MODE_25G; + val |= BNX2_EMAC_MODE_25G_MODE; /* fall through */ case SPEED_1000: val |= BNX2_EMAC_MODE_PORT_GMII; @@ -860,7 +900,7 @@ bnx2_set_link(struct bnx2 *bp) u32 bmsr; u8 link_up; - if (bp->loopback == MAC_LOOPBACK) { + if (bp->loopback == MAC_LOOPBACK || bp->loopback == PHY_LOOPBACK) { bp->link_up = 1; return 0; } @@ -902,6 +942,7 @@ bnx2_set_link(struct bnx2 *bp) u32 bmcr; bnx2_read_phy(bp, MII_BMCR, &bmcr); + bmcr &= ~BCM5708S_BMCR_FORCE_2500; if (!(bmcr & BMCR_ANENABLE)) { bnx2_write_phy(bp, MII_BMCR, bmcr | BMCR_ANENABLE); @@ -988,7 +1029,21 @@ bnx2_setup_serdes_phy(struct bnx2 *bp) u32 new_bmcr; int force_link_down = 0; - if (CHIP_NUM(bp) == CHIP_NUM_5708) { + bnx2_read_phy(bp, MII_ADVERTISE, &adv); + adv &= ~(ADVERTISE_1000XFULL | ADVERTISE_1000XHALF); + + bnx2_read_phy(bp, MII_BMCR, &bmcr); + new_bmcr = bmcr & ~(BMCR_ANENABLE | BCM5708S_BMCR_FORCE_2500); + new_bmcr |= BMCR_SPEED1000; + if (bp->req_line_speed == SPEED_2500) { + new_bmcr |= BCM5708S_BMCR_FORCE_2500; + bnx2_read_phy(bp, BCM5708S_UP1, &up1); + if (!(up1 & BCM5708S_UP1_2G5)) { + up1 |= BCM5708S_UP1_2G5; + bnx2_write_phy(bp, BCM5708S_UP1, up1); + force_link_down = 1; + } + } else if (CHIP_NUM(bp) == CHIP_NUM_5708) { bnx2_read_phy(bp, BCM5708S_UP1, &up1); if (up1 & BCM5708S_UP1_2G5) { up1 &= ~BCM5708S_UP1_2G5; @@ -997,12 +1052,6 @@ bnx2_setup_serdes_phy(struct bnx2 *bp) } } - bnx2_read_phy(bp, MII_ADVERTISE, &adv); - adv &= ~(ADVERTISE_1000XFULL | ADVERTISE_1000XHALF); - - bnx2_read_phy(bp, MII_BMCR, &bmcr); - new_bmcr = bmcr & ~BMCR_ANENABLE; - new_bmcr |= BMCR_SPEED1000; if (bp->req_duplex == DUPLEX_FULL) { adv |= ADVERTISE_1000XFULL; new_bmcr |= BMCR_FULLDPLX; @@ -1023,6 +1072,7 @@ bnx2_setup_serdes_phy(struct bnx2 *bp) bp->link_up = 0; netif_carrier_off(bp->dev); bnx2_write_phy(bp, MII_BMCR, new_bmcr); + bnx2_report_link(bp); } bnx2_write_phy(bp, MII_ADVERTISE, adv); bnx2_write_phy(bp, MII_BMCR, new_bmcr); @@ -1048,30 +1098,26 @@ bnx2_setup_serdes_phy(struct bnx2 *bp) if ((adv != new_adv) || ((bmcr & BMCR_ANENABLE) == 0)) { /* Force a link down visible on the other side */ if (bp->link_up) { - int i; - bnx2_write_phy(bp, MII_BMCR, BMCR_LOOPBACK); - for (i = 0; i < 110; i++) { - udelay(100); - } + spin_unlock_bh(&bp->phy_lock); + msleep(20); + spin_lock_bh(&bp->phy_lock); } bnx2_write_phy(bp, MII_ADVERTISE, new_adv); bnx2_write_phy(bp, MII_BMCR, bmcr | BMCR_ANRESTART | BMCR_ANENABLE); - if (CHIP_NUM(bp) == CHIP_NUM_5706) { - /* Speed up link-up time when the link partner - * does not autonegotiate which is very common - * in blade servers. Some blade servers use - * IPMI for kerboard input and it's important - * to minimize link disruptions. Autoneg. involves - * exchanging base pages plus 3 next pages and - * normally completes in about 120 msec. - */ - bp->current_interval = SERDES_AN_TIMEOUT; - bp->serdes_an_pending = 1; - mod_timer(&bp->timer, jiffies + bp->current_interval); - } + /* Speed up link-up time when the link partner + * does not autonegotiate which is very common + * in blade servers. Some blade servers use + * IPMI for kerboard input and it's important + * to minimize link disruptions. Autoneg. involves + * exchanging base pages plus 3 next pages and + * normally completes in about 120 msec. + */ + bp->current_interval = SERDES_AN_TIMEOUT; + bp->serdes_an_pending = 1; + mod_timer(&bp->timer, jiffies + bp->current_interval); } return 0; @@ -1153,7 +1199,6 @@ bnx2_setup_copper_phy(struct bnx2 *bp) } if (new_bmcr != bmcr) { u32 bmsr; - int i = 0; bnx2_read_phy(bp, MII_BMSR, &bmsr); bnx2_read_phy(bp, MII_BMSR, &bmsr); @@ -1161,12 +1206,12 @@ bnx2_setup_copper_phy(struct bnx2 *bp) if (bmsr & BMSR_LSTATUS) { /* Force link down */ bnx2_write_phy(bp, MII_BMCR, BMCR_LOOPBACK); - do { - udelay(100); - bnx2_read_phy(bp, MII_BMSR, &bmsr); - bnx2_read_phy(bp, MII_BMSR, &bmsr); - i++; - } while ((bmsr & BMSR_LSTATUS) && (i < 620)); + spin_unlock_bh(&bp->phy_lock); + msleep(50); + spin_lock_bh(&bp->phy_lock); + + bnx2_read_phy(bp, MII_BMSR, &bmsr); + bnx2_read_phy(bp, MII_BMSR, &bmsr); } bnx2_write_phy(bp, MII_BMCR, new_bmcr); @@ -1258,9 +1303,8 @@ bnx2_init_5706s_phy(struct bnx2 *bp) { bp->phy_flags &= ~PHY_PARALLEL_DETECT_FLAG; - if (CHIP_NUM(bp) == CHIP_NUM_5706) { - REG_WR(bp, BNX2_MISC_UNUSED0, 0x300); - } + if (CHIP_NUM(bp) == CHIP_NUM_5706) + REG_WR(bp, BNX2_MISC_GP_HW_CTL0, 0x300); if (bp->dev->mtu > 1500) { u32 val; @@ -1397,13 +1441,13 @@ bnx2_set_phy_loopback(struct bnx2 *bp) for (i = 0; i < 10; i++) { if (bnx2_test_link(bp) == 0) break; - udelay(10); + msleep(100); } mac_mode = REG_RD(bp, BNX2_EMAC_MODE); mac_mode &= ~(BNX2_EMAC_MODE_PORT | BNX2_EMAC_MODE_HALF_DUPLEX | BNX2_EMAC_MODE_MAC_LOOP | BNX2_EMAC_MODE_FORCE_LINK | - BNX2_EMAC_MODE_25G); + BNX2_EMAC_MODE_25G_MODE); mac_mode |= BNX2_EMAC_MODE_PORT_GMII; REG_WR(bp, BNX2_EMAC_MODE, mac_mode); @@ -1454,6 +1498,40 @@ bnx2_fw_sync(struct bnx2 *bp, u32 msg_data, int silent) return 0; } +static int +bnx2_init_5709_context(struct bnx2 *bp) +{ + int i, ret = 0; + u32 val; + + val = BNX2_CTX_COMMAND_ENABLED | BNX2_CTX_COMMAND_MEM_INIT | (1 << 12); + val |= (BCM_PAGE_BITS - 8) << 16; + REG_WR(bp, BNX2_CTX_COMMAND, val); + for (i = 0; i < bp->ctx_pages; i++) { + int j; + + REG_WR(bp, BNX2_CTX_HOST_PAGE_TBL_DATA0, + (bp->ctx_blk_mapping[i] & 0xffffffff) | + BNX2_CTX_HOST_PAGE_TBL_DATA0_VALID); + REG_WR(bp, BNX2_CTX_HOST_PAGE_TBL_DATA1, + (u64) bp->ctx_blk_mapping[i] >> 32); + REG_WR(bp, BNX2_CTX_HOST_PAGE_TBL_CTRL, i | + BNX2_CTX_HOST_PAGE_TBL_CTRL_WRITE_REQ); + for (j = 0; j < 10; j++) { + + val = REG_RD(bp, BNX2_CTX_HOST_PAGE_TBL_CTRL); + if (!(val & BNX2_CTX_HOST_PAGE_TBL_CTRL_WRITE_REQ)) + break; + udelay(5); + } + if (val & BNX2_CTX_HOST_PAGE_TBL_CTRL_WRITE_REQ) { + ret = -EBUSY; + break; + } + } + return ret; +} + static void bnx2_init_context(struct bnx2 *bp) { @@ -1576,9 +1654,8 @@ bnx2_alloc_rx_skb(struct bnx2 *bp, u16 index) return -ENOMEM; } - if (unlikely((align = (unsigned long) skb->data & 0x7))) { - skb_reserve(skb, 8 - align); - } + if (unlikely((align = (unsigned long) skb->data & (BNX2_RX_ALIGN - 1)))) + skb_reserve(skb, BNX2_RX_ALIGN - align); mapping = pci_map_single(bp->pdev, skb->data, bp->rx_buf_use_size, PCI_DMA_FROMDEVICE); @@ -2040,7 +2117,8 @@ bnx2_set_rx_mode(struct net_device *dev) if (dev->flags & IFF_PROMISC) { /* Promiscuous mode. */ rx_mode |= BNX2_EMAC_RX_MODE_PROMISCUOUS; - sort_mode |= BNX2_RPM_SORT_USER0_PROM_EN; + sort_mode |= BNX2_RPM_SORT_USER0_PROM_EN | + BNX2_RPM_SORT_USER0_PROM_VLAN; } else if (dev->flags & IFF_ALLMULTI) { for (i = 0; i < NUM_MC_HASH_REGISTERS; i++) { @@ -2208,11 +2286,12 @@ load_rv2p_fw(struct bnx2 *bp, u32 *rv2p_code, u32 rv2p_code_len, } } -static void +static int load_cpu_fw(struct bnx2 *bp, struct cpu_reg *cpu_reg, struct fw_info *fw) { u32 offset; u32 val; + int rc; /* Halt the CPU. */ val = REG_RD_IND(bp, cpu_reg->mode); @@ -2222,7 +2301,18 @@ load_cpu_fw(struct bnx2 *bp, struct cpu_reg *cpu_reg, struct fw_info *fw) /* Load the Text area. */ offset = cpu_reg->spad_base + (fw->text_addr - cpu_reg->mips_view_base); - if (fw->text) { + if (fw->gz_text) { + u32 text_len; + void *text; + + rc = bnx2_gunzip(bp, fw->gz_text, fw->gz_text_len, &text, + &text_len); + if (rc) + return rc; + + fw->text = text; + } + if (fw->gz_text) { int j; for (j = 0; j < (fw->text_len / 4); j++, offset += 4) { @@ -2280,13 +2370,15 @@ load_cpu_fw(struct bnx2 *bp, struct cpu_reg *cpu_reg, struct fw_info *fw) val &= ~cpu_reg->mode_value_halt; REG_WR_IND(bp, cpu_reg->state, cpu_reg->state_value_clear); REG_WR_IND(bp, cpu_reg->mode, val); + + return 0; } static int bnx2_init_cpus(struct bnx2 *bp) { struct cpu_reg cpu_reg; - struct fw_info fw; + struct fw_info *fw; int rc = 0; void *text; u32 text_len; @@ -2323,44 +2415,15 @@ bnx2_init_cpus(struct bnx2 *bp) cpu_reg.spad_base = BNX2_RXP_SCRATCH; cpu_reg.mips_view_base = 0x8000000; - fw.ver_major = bnx2_RXP_b06FwReleaseMajor; - fw.ver_minor = bnx2_RXP_b06FwReleaseMinor; - fw.ver_fix = bnx2_RXP_b06FwReleaseFix; - fw.start_addr = bnx2_RXP_b06FwStartAddr; - - fw.text_addr = bnx2_RXP_b06FwTextAddr; - fw.text_len = bnx2_RXP_b06FwTextLen; - fw.text_index = 0; + if (CHIP_NUM(bp) == CHIP_NUM_5709) + fw = &bnx2_rxp_fw_09; + else + fw = &bnx2_rxp_fw_06; - rc = bnx2_gunzip(bp, bnx2_RXP_b06FwText, sizeof(bnx2_RXP_b06FwText), - &text, &text_len); + rc = load_cpu_fw(bp, &cpu_reg, fw); if (rc) goto init_cpu_err; - fw.text = text; - - fw.data_addr = bnx2_RXP_b06FwDataAddr; - fw.data_len = bnx2_RXP_b06FwDataLen; - fw.data_index = 0; - fw.data = bnx2_RXP_b06FwData; - - fw.sbss_addr = bnx2_RXP_b06FwSbssAddr; - fw.sbss_len = bnx2_RXP_b06FwSbssLen; - fw.sbss_index = 0; - fw.sbss = bnx2_RXP_b06FwSbss; - - fw.bss_addr = bnx2_RXP_b06FwBssAddr; - fw.bss_len = bnx2_RXP_b06FwBssLen; - fw.bss_index = 0; - fw.bss = bnx2_RXP_b06FwBss; - - fw.rodata_addr = bnx2_RXP_b06FwRodataAddr; - fw.rodata_len = bnx2_RXP_b06FwRodataLen; - fw.rodata_index = 0; - fw.rodata = bnx2_RXP_b06FwRodata; - - load_cpu_fw(bp, &cpu_reg, &fw); - /* Initialize the TX Processor. */ cpu_reg.mode = BNX2_TXP_CPU_MODE; cpu_reg.mode_value_halt = BNX2_TXP_CPU_MODE_SOFT_HALT; @@ -2375,44 +2438,15 @@ bnx2_init_cpus(struct bnx2 *bp) cpu_reg.spad_base = BNX2_TXP_SCRATCH; cpu_reg.mips_view_base = 0x8000000; - fw.ver_major = bnx2_TXP_b06FwReleaseMajor; - fw.ver_minor = bnx2_TXP_b06FwReleaseMinor; - fw.ver_fix = bnx2_TXP_b06FwReleaseFix; - fw.start_addr = bnx2_TXP_b06FwStartAddr; - - fw.text_addr = bnx2_TXP_b06FwTextAddr; - fw.text_len = bnx2_TXP_b06FwTextLen; - fw.text_index = 0; + if (CHIP_NUM(bp) == CHIP_NUM_5709) + fw = &bnx2_txp_fw_09; + else + fw = &bnx2_txp_fw_06; - rc = bnx2_gunzip(bp, bnx2_TXP_b06FwText, sizeof(bnx2_TXP_b06FwText), - &text, &text_len); + rc = load_cpu_fw(bp, &cpu_reg, fw); if (rc) goto init_cpu_err; - fw.text = text; - - fw.data_addr = bnx2_TXP_b06FwDataAddr; - fw.data_len = bnx2_TXP_b06FwDataLen; - fw.data_index = 0; - fw.data = bnx2_TXP_b06FwData; - - fw.sbss_addr = bnx2_TXP_b06FwSbssAddr; - fw.sbss_len = bnx2_TXP_b06FwSbssLen; - fw.sbss_index = 0; - fw.sbss = bnx2_TXP_b06FwSbss; - - fw.bss_addr = bnx2_TXP_b06FwBssAddr; - fw.bss_len = bnx2_TXP_b06FwBssLen; - fw.bss_index = 0; - fw.bss = bnx2_TXP_b06FwBss; - - fw.rodata_addr = bnx2_TXP_b06FwRodataAddr; - fw.rodata_len = bnx2_TXP_b06FwRodataLen; - fw.rodata_index = 0; - fw.rodata = bnx2_TXP_b06FwRodata; - - load_cpu_fw(bp, &cpu_reg, &fw); - /* Initialize the TX Patch-up Processor. */ cpu_reg.mode = BNX2_TPAT_CPU_MODE; cpu_reg.mode_value_halt = BNX2_TPAT_CPU_MODE_SOFT_HALT; @@ -2427,44 +2461,15 @@ bnx2_init_cpus(struct bnx2 *bp) cpu_reg.spad_base = BNX2_TPAT_SCRATCH; cpu_reg.mips_view_base = 0x8000000; - fw.ver_major = bnx2_TPAT_b06FwReleaseMajor; - fw.ver_minor = bnx2_TPAT_b06FwReleaseMinor; - fw.ver_fix = bnx2_TPAT_b06FwReleaseFix; - fw.start_addr = bnx2_TPAT_b06FwStartAddr; - - fw.text_addr = bnx2_TPAT_b06FwTextAddr; - fw.text_len = bnx2_TPAT_b06FwTextLen; - fw.text_index = 0; + if (CHIP_NUM(bp) == CHIP_NUM_5709) + fw = &bnx2_tpat_fw_09; + else + fw = &bnx2_tpat_fw_06; - rc = bnx2_gunzip(bp, bnx2_TPAT_b06FwText, sizeof(bnx2_TPAT_b06FwText), - &text, &text_len); + rc = load_cpu_fw(bp, &cpu_reg, fw); if (rc) goto init_cpu_err; - fw.text = text; - - fw.data_addr = bnx2_TPAT_b06FwDataAddr; - fw.data_len = bnx2_TPAT_b06FwDataLen; - fw.data_index = 0; - fw.data = bnx2_TPAT_b06FwData; - - fw.sbss_addr = bnx2_TPAT_b06FwSbssAddr; - fw.sbss_len = bnx2_TPAT_b06FwSbssLen; - fw.sbss_index = 0; - fw.sbss = bnx2_TPAT_b06FwSbss; - - fw.bss_addr = bnx2_TPAT_b06FwBssAddr; - fw.bss_len = bnx2_TPAT_b06FwBssLen; - fw.bss_index = 0; - fw.bss = bnx2_TPAT_b06FwBss; - - fw.rodata_addr = bnx2_TPAT_b06FwRodataAddr; - fw.rodata_len = bnx2_TPAT_b06FwRodataLen; - fw.rodata_index = 0; - fw.rodata = bnx2_TPAT_b06FwRodata; - - load_cpu_fw(bp, &cpu_reg, &fw); - /* Initialize the Completion Processor. */ cpu_reg.mode = BNX2_COM_CPU_MODE; cpu_reg.mode_value_halt = BNX2_COM_CPU_MODE_SOFT_HALT; @@ -2479,44 +2484,36 @@ bnx2_init_cpus(struct bnx2 *bp) cpu_reg.spad_base = BNX2_COM_SCRATCH; cpu_reg.mips_view_base = 0x8000000; - fw.ver_major = bnx2_COM_b06FwReleaseMajor; - fw.ver_minor = bnx2_COM_b06FwReleaseMinor; - fw.ver_fix = bnx2_COM_b06FwReleaseFix; - fw.start_addr = bnx2_COM_b06FwStartAddr; - - fw.text_addr = bnx2_COM_b06FwTextAddr; - fw.text_len = bnx2_COM_b06FwTextLen; - fw.text_index = 0; + if (CHIP_NUM(bp) == CHIP_NUM_5709) + fw = &bnx2_com_fw_09; + else + fw = &bnx2_com_fw_06; - rc = bnx2_gunzip(bp, bnx2_COM_b06FwText, sizeof(bnx2_COM_b06FwText), - &text, &text_len); + rc = load_cpu_fw(bp, &cpu_reg, fw); if (rc) goto init_cpu_err; - fw.text = text; - - fw.data_addr = bnx2_COM_b06FwDataAddr; - fw.data_len = bnx2_COM_b06FwDataLen; - fw.data_index = 0; - fw.data = bnx2_COM_b06FwData; - - fw.sbss_addr = bnx2_COM_b06FwSbssAddr; - fw.sbss_len = bnx2_COM_b06FwSbssLen; - fw.sbss_index = 0; - fw.sbss = bnx2_COM_b06FwSbss; - - fw.bss_addr = bnx2_COM_b06FwBssAddr; - fw.bss_len = bnx2_COM_b06FwBssLen; - fw.bss_index = 0; - fw.bss = bnx2_COM_b06FwBss; - - fw.rodata_addr = bnx2_COM_b06FwRodataAddr; - fw.rodata_len = bnx2_COM_b06FwRodataLen; - fw.rodata_index = 0; - fw.rodata = bnx2_COM_b06FwRodata; + /* Initialize the Command Processor. */ + cpu_reg.mode = BNX2_CP_CPU_MODE; + cpu_reg.mode_value_halt = BNX2_CP_CPU_MODE_SOFT_HALT; + cpu_reg.mode_value_sstep = BNX2_CP_CPU_MODE_STEP_ENA; + cpu_reg.state = BNX2_CP_CPU_STATE; + cpu_reg.state_value_clear = 0xffffff; + cpu_reg.gpr0 = BNX2_CP_CPU_REG_FILE; + cpu_reg.evmask = BNX2_CP_CPU_EVENT_MASK; + cpu_reg.pc = BNX2_CP_CPU_PROGRAM_COUNTER; + cpu_reg.inst = BNX2_CP_CPU_INSTRUCTION; + cpu_reg.bp = BNX2_CP_CPU_HW_BREAKPOINT; + cpu_reg.spad_base = BNX2_CP_SCRATCH; + cpu_reg.mips_view_base = 0x8000000; - load_cpu_fw(bp, &cpu_reg, &fw); + if (CHIP_NUM(bp) == CHIP_NUM_5709) { + fw = &bnx2_cp_fw_09; + load_cpu_fw(bp, &cpu_reg, fw); + if (rc) + goto init_cpu_err; + } init_cpu_err: bnx2_gunzip_end(bp); return rc; @@ -3288,31 +3285,44 @@ bnx2_reset_chip(struct bnx2 *bp, u32 reset_code) * before we issue a reset. */ val = REG_RD(bp, BNX2_MISC_ID); - val = BNX2_PCICFG_MISC_CONFIG_CORE_RST_REQ | - BNX2_PCICFG_MISC_CONFIG_REG_WINDOW_ENA | - BNX2_PCICFG_MISC_CONFIG_TARGET_MB_WORD_SWAP; + if (CHIP_NUM(bp) == CHIP_NUM_5709) { + REG_WR(bp, BNX2_MISC_COMMAND, BNX2_MISC_COMMAND_SW_RESET); + REG_RD(bp, BNX2_MISC_COMMAND); + udelay(5); - /* Chip reset. */ - REG_WR(bp, BNX2_PCICFG_MISC_CONFIG, val); + val = BNX2_PCICFG_MISC_CONFIG_REG_WINDOW_ENA | + BNX2_PCICFG_MISC_CONFIG_TARGET_MB_WORD_SWAP; - if ((CHIP_ID(bp) == CHIP_ID_5706_A0) || - (CHIP_ID(bp) == CHIP_ID_5706_A1)) - msleep(15); + pci_write_config_dword(bp->pdev, BNX2_PCICFG_MISC_CONFIG, val); - /* Reset takes approximate 30 usec */ - for (i = 0; i < 10; i++) { - val = REG_RD(bp, BNX2_PCICFG_MISC_CONFIG); - if ((val & (BNX2_PCICFG_MISC_CONFIG_CORE_RST_REQ | - BNX2_PCICFG_MISC_CONFIG_CORE_RST_BSY)) == 0) { - break; + } else { + val = BNX2_PCICFG_MISC_CONFIG_CORE_RST_REQ | + BNX2_PCICFG_MISC_CONFIG_REG_WINDOW_ENA | + BNX2_PCICFG_MISC_CONFIG_TARGET_MB_WORD_SWAP; + + /* Chip reset. */ + REG_WR(bp, BNX2_PCICFG_MISC_CONFIG, val); + + if ((CHIP_ID(bp) == CHIP_ID_5706_A0) || + (CHIP_ID(bp) == CHIP_ID_5706_A1)) { + current->state = TASK_UNINTERRUPTIBLE; + schedule_timeout(HZ / 50); } - udelay(10); - } - if (val & (BNX2_PCICFG_MISC_CONFIG_CORE_RST_REQ | - BNX2_PCICFG_MISC_CONFIG_CORE_RST_BSY)) { - printk(KERN_ERR PFX "Chip reset did not complete\n"); - return -EBUSY; + /* Reset takes approximate 30 usec */ + for (i = 0; i < 10; i++) { + val = REG_RD(bp, BNX2_PCICFG_MISC_CONFIG); + if ((val & (BNX2_PCICFG_MISC_CONFIG_CORE_RST_REQ | + BNX2_PCICFG_MISC_CONFIG_CORE_RST_BSY)) == 0) + break; + udelay(10); + } + + if (val & (BNX2_PCICFG_MISC_CONFIG_CORE_RST_REQ | + BNX2_PCICFG_MISC_CONFIG_CORE_RST_BSY)) { + printk(KERN_ERR PFX "Chip reset did not complete\n"); + return -EBUSY; + } } /* Make sure byte swapping is properly configured. */ @@ -3390,7 +3400,10 @@ bnx2_init_chip(struct bnx2 *bp) /* Initialize context mapping and zero out the quick contexts. The * context block must have already been enabled. */ - bnx2_init_context(bp); + if (CHIP_NUM(bp) == CHIP_NUM_5709) + bnx2_init_5709_context(bp); + else + bnx2_init_context(bp); if ((rc = bnx2_init_cpus(bp)) != 0) return rc; @@ -3501,12 +3514,40 @@ bnx2_init_chip(struct bnx2 *bp) return rc; } +static void +bnx2_init_tx_context(struct bnx2 *bp, u32 cid) +{ + u32 val, offset0, offset1, offset2, offset3; + + if (CHIP_NUM(bp) == CHIP_NUM_5709) { + offset0 = BNX2_L2CTX_TYPE_XI; + offset1 = BNX2_L2CTX_CMD_TYPE_XI; + offset2 = BNX2_L2CTX_TBDR_BHADDR_HI_XI; + offset3 = BNX2_L2CTX_TBDR_BHADDR_LO_XI; + } else { + offset0 = BNX2_L2CTX_TYPE; + offset1 = BNX2_L2CTX_CMD_TYPE; + offset2 = BNX2_L2CTX_TBDR_BHADDR_HI; + offset3 = BNX2_L2CTX_TBDR_BHADDR_LO; + } + val = BNX2_L2CTX_TYPE_TYPE_L2 | BNX2_L2CTX_TYPE_SIZE_L2; + CTX_WR(bp, GET_CID_ADDR(cid), offset0, val); + + val = BNX2_L2CTX_CMD_TYPE_TYPE_L2 | (8 << 16); + CTX_WR(bp, GET_CID_ADDR(cid), offset1, val); + + val = (u64) bp->tx_desc_mapping >> 32; + CTX_WR(bp, GET_CID_ADDR(cid), offset2, val); + + val = (u64) bp->tx_desc_mapping & 0xffffffff; + CTX_WR(bp, GET_CID_ADDR(cid), offset3, val); +} static void bnx2_init_tx_ring(struct bnx2 *bp) { struct tx_bd *txbd; - u32 val; + u32 cid; bp->tx_wake_thresh = bp->tx_ring_size / 2; @@ -3520,19 +3561,11 @@ bnx2_init_tx_ring(struct bnx2 *bp) bp->hw_tx_cons = 0; bp->tx_prod_bseq = 0; - val = BNX2_L2CTX_TYPE_TYPE_L2; - val |= BNX2_L2CTX_TYPE_SIZE_L2; - CTX_WR(bp, GET_CID_ADDR(TX_CID), BNX2_L2CTX_TYPE, val); + cid = TX_CID; + bp->tx_bidx_addr = MB_GET_CID_ADDR(cid) + BNX2_L2CTX_TX_HOST_BIDX; + bp->tx_bseq_addr = MB_GET_CID_ADDR(cid) + BNX2_L2CTX_TX_HOST_BSEQ; - val = BNX2_L2CTX_CMD_TYPE_TYPE_L2; - val |= 8 << 16; - CTX_WR(bp, GET_CID_ADDR(TX_CID), BNX2_L2CTX_CMD_TYPE, val); - - val = (u64) bp->tx_desc_mapping >> 32; - CTX_WR(bp, GET_CID_ADDR(TX_CID), BNX2_L2CTX_TBDR_BHADDR_HI, val); - - val = (u64) bp->tx_desc_mapping & 0xffffffff; - CTX_WR(bp, GET_CID_ADDR(TX_CID), BNX2_L2CTX_TBDR_BHADDR_LO, val); + bnx2_init_tx_context(bp, cid); } static void @@ -3545,8 +3578,8 @@ bnx2_init_rx_ring(struct bnx2 *bp) /* 8 for CRC and VLAN */ bp->rx_buf_use_size = bp->dev->mtu + ETH_HLEN + bp->rx_offset + 8; - /* 8 for alignment */ - bp->rx_buf_size = bp->rx_buf_use_size + 8; + /* hw alignment */ + bp->rx_buf_size = bp->rx_buf_use_size + BNX2_RX_ALIGN; ring_prod = prod = bp->rx_prod = 0; bp->rx_cons = 0; @@ -3712,7 +3745,9 @@ bnx2_init_nic(struct bnx2 *bp) if ((rc = bnx2_reset_nic(bp, BNX2_DRV_MSG_CODE_RESET)) != 0) return rc; + spin_lock_bh(&bp->phy_lock); bnx2_init_phy(bp); + spin_unlock_bh(&bp->phy_lock); bnx2_set_link(bp); return 0; } @@ -3952,7 +3987,7 @@ bnx2_run_loopback(struct bnx2 *bp, int loopback_mode) bnx2_set_mac_loopback(bp); } else if (loopback_mode == BNX2_PHY_LOOPBACK) { - bp->loopback = 0; + bp->loopback = PHY_LOOPBACK; bnx2_set_phy_loopback(bp); } else @@ -3992,8 +4027,8 @@ bnx2_run_loopback(struct bnx2 *bp, int loopback_mode) bp->tx_prod = NEXT_TX_BD(bp->tx_prod); bp->tx_prod_bseq += pkt_size; - REG_WR16(bp, MB_TX_CID_ADDR + BNX2_L2CTX_TX_HOST_BIDX, bp->tx_prod); - REG_WR(bp, MB_TX_CID_ADDR + BNX2_L2CTX_TX_HOST_BSEQ, bp->tx_prod_bseq); + REG_WR16(bp, bp->tx_bidx_addr, bp->tx_prod); + REG_WR(bp, bp->tx_bseq_addr, bp->tx_prod_bseq); udelay(100); @@ -4162,80 +4197,117 @@ bnx2_test_intr(struct bnx2 *bp) } static void -bnx2_timer(unsigned long data) +bnx2_5706_serdes_timer(struct bnx2 *bp) { - struct bnx2 *bp = (struct bnx2 *) data; - u32 msg; + spin_lock(&bp->phy_lock); + if (bp->serdes_an_pending) + bp->serdes_an_pending--; + else if ((bp->link_up == 0) && (bp->autoneg & AUTONEG_SPEED)) { + u32 bmcr; - if (!netif_running(bp->dev)) - return; + bp->current_interval = bp->timer_interval; - if (atomic_read(&bp->intr_sem) != 0) - goto bnx2_restart_timer; + bnx2_read_phy(bp, MII_BMCR, &bmcr); - msg = (u32) ++bp->fw_drv_pulse_wr_seq; - REG_WR_IND(bp, bp->shmem_base + BNX2_DRV_PULSE_MB, msg); + if (bmcr & BMCR_ANENABLE) { + u32 phy1, phy2; - bp->stats_blk->stat_FwRxDrop = REG_RD_IND(bp, BNX2_FW_RX_DROP_COUNT); + bnx2_write_phy(bp, 0x1c, 0x7c00); + bnx2_read_phy(bp, 0x1c, &phy1); - if ((bp->phy_flags & PHY_SERDES_FLAG) && - (CHIP_NUM(bp) == CHIP_NUM_5706)) { + bnx2_write_phy(bp, 0x17, 0x0f01); + bnx2_read_phy(bp, 0x15, &phy2); + bnx2_write_phy(bp, 0x17, 0x0f01); + bnx2_read_phy(bp, 0x15, &phy2); - spin_lock(&bp->phy_lock); - if (bp->serdes_an_pending) { - bp->serdes_an_pending--; + if ((phy1 & 0x10) && /* SIGNAL DETECT */ + !(phy2 & 0x20)) { /* no CONFIG */ + + bmcr &= ~BMCR_ANENABLE; + bmcr |= BMCR_SPEED1000 | BMCR_FULLDPLX; + bnx2_write_phy(bp, MII_BMCR, bmcr); + bp->phy_flags |= PHY_PARALLEL_DETECT_FLAG; + } } - else if ((bp->link_up == 0) && (bp->autoneg & AUTONEG_SPEED)) { - u32 bmcr; + } + else if ((bp->link_up) && (bp->autoneg & AUTONEG_SPEED) && + (bp->phy_flags & PHY_PARALLEL_DETECT_FLAG)) { + u32 phy2; - bp->current_interval = bp->timer_interval; + bnx2_write_phy(bp, 0x17, 0x0f01); + bnx2_read_phy(bp, 0x15, &phy2); + if (phy2 & 0x20) { + u32 bmcr; bnx2_read_phy(bp, MII_BMCR, &bmcr); + bmcr |= BMCR_ANENABLE; + bnx2_write_phy(bp, MII_BMCR, bmcr); - if (bmcr & BMCR_ANENABLE) { - u32 phy1, phy2; + bp->phy_flags &= ~PHY_PARALLEL_DETECT_FLAG; + } + } else + bp->current_interval = bp->timer_interval; - bnx2_write_phy(bp, 0x1c, 0x7c00); - bnx2_read_phy(bp, 0x1c, &phy1); + spin_unlock(&bp->phy_lock); +} - bnx2_write_phy(bp, 0x17, 0x0f01); - bnx2_read_phy(bp, 0x15, &phy2); - bnx2_write_phy(bp, 0x17, 0x0f01); - bnx2_read_phy(bp, 0x15, &phy2); +static void +bnx2_5708_serdes_timer(struct bnx2 *bp) +{ + if ((bp->phy_flags & PHY_2_5G_CAPABLE_FLAG) == 0) { + bp->serdes_an_pending = 0; + return; + } - if ((phy1 & 0x10) && /* SIGNAL DETECT */ - !(phy2 & 0x20)) { /* no CONFIG */ + spin_lock(&bp->phy_lock); + if (bp->serdes_an_pending) + bp->serdes_an_pending--; + else if ((bp->link_up == 0) && (bp->autoneg & AUTONEG_SPEED)) { + u32 bmcr; - bmcr &= ~BMCR_ANENABLE; - bmcr |= BMCR_SPEED1000 | - BMCR_FULLDPLX; - bnx2_write_phy(bp, MII_BMCR, bmcr); - bp->phy_flags |= - PHY_PARALLEL_DETECT_FLAG; - } - } + bnx2_read_phy(bp, MII_BMCR, &bmcr); + + if (bmcr & BMCR_ANENABLE) { + bmcr &= ~BMCR_ANENABLE; + bmcr |= BMCR_FULLDPLX | BCM5708S_BMCR_FORCE_2500; + bnx2_write_phy(bp, MII_BMCR, bmcr); + bp->current_interval = SERDES_FORCED_TIMEOUT; + } else { + bmcr &= ~(BMCR_FULLDPLX | BCM5708S_BMCR_FORCE_2500); + bmcr |= BMCR_ANENABLE; + bnx2_write_phy(bp, MII_BMCR, bmcr); + bp->serdes_an_pending = 2; + bp->current_interval = bp->timer_interval; } - else if ((bp->link_up) && (bp->autoneg & AUTONEG_SPEED) && - (bp->phy_flags & PHY_PARALLEL_DETECT_FLAG)) { - u32 phy2; - bnx2_write_phy(bp, 0x17, 0x0f01); - bnx2_read_phy(bp, 0x15, &phy2); - if (phy2 & 0x20) { - u32 bmcr; + } else + bp->current_interval = bp->timer_interval; - bnx2_read_phy(bp, MII_BMCR, &bmcr); - bmcr |= BMCR_ANENABLE; - bnx2_write_phy(bp, MII_BMCR, bmcr); + spin_unlock(&bp->phy_lock); +} + +static void +bnx2_timer(unsigned long data) +{ + struct bnx2 *bp = (struct bnx2 *) data; + u32 msg; - bp->phy_flags &= ~PHY_PARALLEL_DETECT_FLAG; + if (!netif_running(bp->dev)) + return; - } - } - else - bp->current_interval = bp->timer_interval; + if (atomic_read(&bp->intr_sem) != 0) + goto bnx2_restart_timer; - spin_unlock(&bp->phy_lock); + msg = (u32) ++bp->fw_drv_pulse_wr_seq; + REG_WR_IND(bp, bp->shmem_base + BNX2_DRV_PULSE_MB, msg); + + bp->stats_blk->stat_FwRxDrop = REG_RD_IND(bp, BNX2_FW_RX_DROP_COUNT); + + if (bp->phy_flags & PHY_SERDES_FLAG) { + if (CHIP_NUM(bp) == CHIP_NUM_5706) + bnx2_5706_serdes_timer(bp); + else if (CHIP_NUM(bp) == CHIP_NUM_5708) + bnx2_5708_serdes_timer(bp); } bnx2_restart_timer: @@ -4508,8 +4580,8 @@ bnx2_start_xmit(struct sk_buff *skb, struct net_device *dev) prod = NEXT_TX_BD(prod); bp->tx_prod_bseq += skb->len; - REG_WR16(bp, MB_TX_CID_ADDR + BNX2_L2CTX_TX_HOST_BIDX, prod); - REG_WR(bp, MB_TX_CID_ADDR + BNX2_L2CTX_TX_HOST_BSEQ, bp->tx_prod_bseq); + REG_WR16(bp, bp->tx_bidx_addr, prod); + REG_WR(bp, bp->tx_bseq_addr, bp->tx_prod_bseq); mmiowb(); @@ -4743,10 +4815,14 @@ bnx2_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) } else { if (bp->phy_flags & PHY_SERDES_FLAG) { - if ((cmd->speed != SPEED_1000) || - (cmd->duplex != DUPLEX_FULL)) { + if ((cmd->speed != SPEED_1000 && + cmd->speed != SPEED_2500) || + (cmd->duplex != DUPLEX_FULL)) + return -EINVAL; + + if (cmd->speed == SPEED_2500 && + !(bp->phy_flags & PHY_2_5G_CAPABLE_FLAG)) return -EINVAL; - } } else if (cmd->speed == SPEED_1000) { return -EINVAL; @@ -4903,11 +4979,10 @@ bnx2_nway_reset(struct net_device *dev) msleep(20); spin_lock_bh(&bp->phy_lock); - if (CHIP_NUM(bp) == CHIP_NUM_5706) { - bp->current_interval = SERDES_AN_TIMEOUT; - bp->serdes_an_pending = 1; - mod_timer(&bp->timer, jiffies + bp->current_interval); - } + + bp->current_interval = SERDES_AN_TIMEOUT; + bp->serdes_an_pending = 1; + mod_timer(&bp->timer, jiffies + bp->current_interval); } bnx2_read_phy(bp, MII_BMCR, &bmcr); @@ -5288,6 +5363,8 @@ bnx2_self_test(struct net_device *dev, struct ethtool_test *etest, u64 *buf) memset(buf, 0, sizeof(u64) * BNX2_NUM_TESTS); if (etest->flags & ETH_TEST_FL_OFFLINE) { + int i; + bnx2_netif_stop(bp); bnx2_reset_chip(bp, BNX2_DRV_MSG_CODE_DIAG); bnx2_free_skbs(bp); @@ -5312,9 +5389,11 @@ bnx2_self_test(struct net_device *dev, struct ethtool_test *etest, u64 *buf) } /* wait for link up */ - msleep_interruptible(3000); - if ((!bp->link_up) && !(bp->phy_flags & PHY_SERDES_FLAG)) - msleep_interruptible(4000); + for (i = 0; i < 7; i++) { + if (bp->link_up) + break; + msleep_interruptible(1000); + } } if (bnx2_test_nvram(bp) != 0) { @@ -5604,13 +5683,6 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev) goto err_out_release; } - bp->pcix_cap = pci_find_capability(pdev, PCI_CAP_ID_PCIX); - if (bp->pcix_cap == 0) { - dev_err(&pdev->dev, "Cannot find PCIX capability, aborting.\n"); - rc = -EIO; - goto err_out_release; - } - if (pci_set_dma_mask(pdev, DMA_64BIT_MASK) == 0) { bp->flags |= USING_DAC_FLAG; if (pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK) != 0) { @@ -5633,7 +5705,7 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev) INIT_WORK(&bp->reset_task, bnx2_reset_task); dev->base_addr = dev->mem_start = pci_resource_start(pdev, 0); - mem_len = MB_GET_CID_ADDR(17); + mem_len = MB_GET_CID_ADDR(TX_TSS_CID + 1); dev->mem_end = dev->mem_start + mem_len; dev->irq = pdev->irq; @@ -5657,6 +5729,16 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev) bp->chip_id = REG_RD(bp, BNX2_MISC_ID); + if (CHIP_NUM(bp) != CHIP_NUM_5709) { + bp->pcix_cap = pci_find_capability(pdev, PCI_CAP_ID_PCIX); + if (bp->pcix_cap == 0) { + dev_err(&pdev->dev, + "Cannot find PCIX capability, aborting.\n"); + rc = -EIO; + goto err_out_unmap; + } + } + /* Get bus information. */ reg = REG_RD(bp, BNX2_PCICFG_MISC_STATUS); if (reg & BNX2_PCICFG_MISC_STATUS_PCIX_DET) { @@ -5776,10 +5858,15 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev) bp->phy_addr = 1; /* Disable WOL support if we are running on a SERDES chip. */ - if (CHIP_BOND_ID(bp) & CHIP_BOND_ID_SERDES_BIT) { + if (CHIP_NUM(bp) == CHIP_NUM_5709) { + if (CHIP_BOND_ID(bp) != BNX2_MISC_DUAL_MEDIA_CTRL_BOND_ID_C) + bp->phy_flags |= PHY_SERDES_FLAG; + } else if (CHIP_BOND_ID(bp) & CHIP_BOND_ID_SERDES_BIT) bp->phy_flags |= PHY_SERDES_FLAG; + + if (bp->phy_flags & PHY_SERDES_FLAG) { bp->flags |= NO_WOL_FLAG; - if (CHIP_NUM(bp) == CHIP_NUM_5708) { + if (CHIP_NUM(bp) != CHIP_NUM_5706) { bp->phy_addr = 2; reg = REG_RD_IND(bp, bp->shmem_base + BNX2_SHARED_HW_CFG_CONFIG); diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h index ca31904893e..13b6f9b11e0 100644 --- a/drivers/net/bnx2.h +++ b/drivers/net/bnx2.h @@ -56,6 +56,7 @@ struct rx_bd { }; +#define BNX2_RX_ALIGN 16 /* * status_block definition @@ -90,6 +91,7 @@ struct status_block { #define STATUS_ATTN_BITS_DMAE_ABORT (1L<<25) #define STATUS_ATTN_BITS_FLSH_ABORT (1L<<26) #define STATUS_ATTN_BITS_GRC_ABORT (1L<<27) + #define STATUS_ATTN_BITS_EPB_ERROR (1L<<30) #define STATUS_ATTN_BITS_PARITY_ERROR (1L<<31) u32 status_attn_bits_ack; @@ -117,7 +119,8 @@ struct status_block { u16 status_completion_producer_index; u16 status_cmd_consumer_index; u16 status_idx; - u16 status_unused; + u8 status_unused; + u8 status_blk_num; #elif defined(__LITTLE_ENDIAN) u16 status_tx_quick_consumer_index1; u16 status_tx_quick_consumer_index0; @@ -141,7 +144,8 @@ struct status_block { u16 status_rx_quick_consumer_index14; u16 status_cmd_consumer_index; u16 status_completion_producer_index; - u16 status_unused; + u8 status_blk_num; + u8 status_unused; u16 status_idx; #endif }; @@ -301,6 +305,10 @@ struct l2_fhdr { #define BNX2_L2CTX_TXP_BIDX 0x000000a8 #define BNX2_L2CTX_TXP_BSEQ 0x000000ac +#define BNX2_L2CTX_TYPE_XI 0x00000080 +#define BNX2_L2CTX_CMD_TYPE_XI 0x00000240 +#define BNX2_L2CTX_TBDR_BHADDR_HI_XI 0x00000258 +#define BNX2_L2CTX_TBDR_BHADDR_LO_XI 0x0000025c /* * l2_bd_chain_context definition @@ -328,11 +336,15 @@ struct l2_fhdr { #define BNX2_PCICFG_MISC_CONFIG 0x00000068 #define BNX2_PCICFG_MISC_CONFIG_TARGET_BYTE_SWAP (1L<<2) #define BNX2_PCICFG_MISC_CONFIG_TARGET_MB_WORD_SWAP (1L<<3) +#define BNX2_PCICFG_MISC_CONFIG_RESERVED1 (1L<<4) #define BNX2_PCICFG_MISC_CONFIG_CLOCK_CTL_ENA (1L<<5) #define BNX2_PCICFG_MISC_CONFIG_TARGET_GRC_WORD_SWAP (1L<<6) #define BNX2_PCICFG_MISC_CONFIG_REG_WINDOW_ENA (1L<<7) #define BNX2_PCICFG_MISC_CONFIG_CORE_RST_REQ (1L<<8) #define BNX2_PCICFG_MISC_CONFIG_CORE_RST_BSY (1L<<9) +#define BNX2_PCICFG_MISC_CONFIG_GRC_WIN1_SWAP_EN (1L<<10) +#define BNX2_PCICFG_MISC_CONFIG_GRC_WIN2_SWAP_EN (1L<<11) +#define BNX2_PCICFG_MISC_CONFIG_GRC_WIN3_SWAP_EN (1L<<12) #define BNX2_PCICFG_MISC_CONFIG_ASIC_METAL_REV (0xffL<<16) #define BNX2_PCICFG_MISC_CONFIG_ASIC_BASE_REV (0xfL<<24) #define BNX2_PCICFG_MISC_CONFIG_ASIC_ID (0xfL<<28) @@ -347,6 +359,7 @@ struct l2_fhdr { #define BNX2_PCICFG_MISC_STATUS_PCIX_SPEED_100 (1L<<4) #define BNX2_PCICFG_MISC_STATUS_PCIX_SPEED_133 (2L<<4) #define BNX2_PCICFG_MISC_STATUS_PCIX_SPEED_PCI_MODE (3L<<4) +#define BNX2_PCICFG_MISC_STATUS_BAD_MEM_WRITE_BE (1L<<8) #define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS 0x00000070 #define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET (0xfL<<0) @@ -366,7 +379,7 @@ struct l2_fhdr { #define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_CORE_CLK_ALT_SRC_12 (1L<<8) #define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_CORE_CLK_ALT_SRC_6 (2L<<8) #define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_CORE_CLK_ALT_SRC_62 (4L<<8) -#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PLAY_DEAD (1L<<11) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_MIN_POWER (1L<<11) #define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_CORE_CLK_PLL_SPEED (0xfL<<12) #define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_CORE_CLK_PLL_SPEED_100 (0L<<12) #define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_CORE_CLK_PLL_SPEED_80 (1L<<12) @@ -374,18 +387,21 @@ struct l2_fhdr { #define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_CORE_CLK_PLL_SPEED_40 (4L<<12) #define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_CORE_CLK_PLL_SPEED_25 (8L<<12) #define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_CORE_CLK_PLL_STOP (1L<<16) -#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_PLL_STOP (1L<<17) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_RESERVED_17 (1L<<17) #define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_RESERVED_18 (1L<<18) -#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_USE_SPD_DET (1L<<19) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_RESERVED_19 (1L<<19) #define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_RESERVED (0xfffL<<20) #define BNX2_PCICFG_REG_WINDOW_ADDRESS 0x00000078 +#define BNX2_PCICFG_REG_WINDOW_ADDRESS_VAL (0xfffffL<<2) + #define BNX2_PCICFG_REG_WINDOW 0x00000080 #define BNX2_PCICFG_INT_ACK_CMD 0x00000084 #define BNX2_PCICFG_INT_ACK_CMD_INDEX (0xffffL<<0) #define BNX2_PCICFG_INT_ACK_CMD_INDEX_VALID (1L<<16) #define BNX2_PCICFG_INT_ACK_CMD_USE_INT_HC_PARAM (1L<<17) #define BNX2_PCICFG_INT_ACK_CMD_MASK_INT (1L<<18) +#define BNX2_PCICFG_INT_ACK_CMD_INTERRUPT_NUM (0xfL<<24) #define BNX2_PCICFG_STATUS_BIT_SET_CMD 0x00000088 #define BNX2_PCICFG_STATUS_BIT_CLEAR_CMD 0x0000008c @@ -398,9 +414,11 @@ struct l2_fhdr { * offset: 0x400 */ #define BNX2_PCI_GRC_WINDOW_ADDR 0x00000400 -#define BNX2_PCI_GRC_WINDOW_ADDR_PCI_GRC_WINDOW_ADDR_VALUE (0x3ffffL<<8) +#define BNX2_PCI_GRC_WINDOW_ADDR_VALUE (0x1ffL<<13) +#define BNX2_PCI_GRC_WINDOW_ADDR_SEP_WIN (1L<<31) #define BNX2_PCI_CONFIG_1 0x00000404 +#define BNX2_PCI_CONFIG_1_RESERVED0 (0xffL<<0) #define BNX2_PCI_CONFIG_1_READ_BOUNDARY (0x7L<<8) #define BNX2_PCI_CONFIG_1_READ_BOUNDARY_OFF (0L<<8) #define BNX2_PCI_CONFIG_1_READ_BOUNDARY_16 (1L<<8) @@ -419,6 +437,7 @@ struct l2_fhdr { #define BNX2_PCI_CONFIG_1_WRITE_BOUNDARY_256 (5L<<11) #define BNX2_PCI_CONFIG_1_WRITE_BOUNDARY_512 (6L<<11) #define BNX2_PCI_CONFIG_1_WRITE_BOUNDARY_1024 (7L<<11) +#define BNX2_PCI_CONFIG_1_RESERVED1 (0x3ffffL<<14) #define BNX2_PCI_CONFIG_2 0x00000408 #define BNX2_PCI_CONFIG_2_BAR1_SIZE (0xfL<<0) @@ -468,9 +487,13 @@ struct l2_fhdr { #define BNX2_PCI_CONFIG_2_FORCE_32_BIT_MSTR (1L<<23) #define BNX2_PCI_CONFIG_2_FORCE_32_BIT_TGT (1L<<24) #define BNX2_PCI_CONFIG_2_KEEP_REQ_ASSERT (1L<<25) +#define BNX2_PCI_CONFIG_2_RESERVED0 (0x3fL<<26) +#define BNX2_PCI_CONFIG_2_BAR_PREFETCH_XI (1L<<16) +#define BNX2_PCI_CONFIG_2_RESERVED0_XI (0x7fffL<<17) #define BNX2_PCI_CONFIG_3 0x0000040c #define BNX2_PCI_CONFIG_3_STICKY_BYTE (0xffL<<0) +#define BNX2_PCI_CONFIG_3_REG_STICKY_BYTE (0xffL<<8) #define BNX2_PCI_CONFIG_3_FORCE_PME (1L<<24) #define BNX2_PCI_CONFIG_3_PME_STATUS (1L<<25) #define BNX2_PCI_CONFIG_3_PME_ENABLE (1L<<26) @@ -501,8 +524,10 @@ struct l2_fhdr { #define BNX2_PCI_VPD_INTF_INTF_REQ (1L<<0) #define BNX2_PCI_VPD_ADDR_FLAG 0x0000042c -#define BNX2_PCI_VPD_ADDR_FLAG_ADDRESS (0x1fff<<2) -#define BNX2_PCI_VPD_ADDR_FLAG_WR (1<<15) +#define BNX2_PCI_VPD_ADDR_FLAG_MSK 0x0000ffff +#define BNX2_PCI_VPD_ADDR_FLAG_SL 0L +#define BNX2_PCI_VPD_ADDR_FLAG_ADDRESS (0x1fffL<<2) +#define BNX2_PCI_VPD_ADDR_FLAG_WR (1L<<15) #define BNX2_PCI_VPD_DATA 0x00000430 #define BNX2_PCI_ID_VAL1 0x00000434 @@ -535,19 +560,26 @@ struct l2_fhdr { #define BNX2_PCI_ID_VAL4_CAP_ENA_13 (13L<<0) #define BNX2_PCI_ID_VAL4_CAP_ENA_14 (14L<<0) #define BNX2_PCI_ID_VAL4_CAP_ENA_15 (15L<<0) +#define BNX2_PCI_ID_VAL4_RESERVED0 (0x3L<<4) #define BNX2_PCI_ID_VAL4_PM_SCALE_PRG (0x3L<<6) #define BNX2_PCI_ID_VAL4_PM_SCALE_PRG_0 (0L<<6) #define BNX2_PCI_ID_VAL4_PM_SCALE_PRG_1 (1L<<6) #define BNX2_PCI_ID_VAL4_PM_SCALE_PRG_2 (2L<<6) #define BNX2_PCI_ID_VAL4_PM_SCALE_PRG_3 (3L<<6) +#define BNX2_PCI_ID_VAL4_MSI_PV_MASK_CAP (1L<<8) #define BNX2_PCI_ID_VAL4_MSI_LIMIT (0x7L<<9) -#define BNX2_PCI_ID_VAL4_MSI_ADVERTIZE (0x7L<<12) +#define BNX2_PCI_ID_VAL4_MULTI_MSG_CAP (0x7L<<12) #define BNX2_PCI_ID_VAL4_MSI_ENABLE (1L<<15) #define BNX2_PCI_ID_VAL4_MAX_64_ADVERTIZE (1L<<16) #define BNX2_PCI_ID_VAL4_MAX_133_ADVERTIZE (1L<<17) -#define BNX2_PCI_ID_VAL4_MAX_MEM_READ_SIZE (0x3L<<21) -#define BNX2_PCI_ID_VAL4_MAX_SPLIT_SIZE (0x7L<<23) -#define BNX2_PCI_ID_VAL4_MAX_CUMULATIVE_SIZE (0x7L<<26) +#define BNX2_PCI_ID_VAL4_RESERVED2 (0x7L<<18) +#define BNX2_PCI_ID_VAL4_MAX_CUMULATIVE_SIZE_B21 (0x3L<<21) +#define BNX2_PCI_ID_VAL4_MAX_SPLIT_SIZE_B21 (0x3L<<23) +#define BNX2_PCI_ID_VAL4_MAX_CUMULATIVE_SIZE_B0 (1L<<25) +#define BNX2_PCI_ID_VAL4_MAX_MEM_READ_SIZE_B10 (0x3L<<26) +#define BNX2_PCI_ID_VAL4_MAX_SPLIT_SIZE_B0 (1L<<28) +#define BNX2_PCI_ID_VAL4_RESERVED3 (0x7L<<29) +#define BNX2_PCI_ID_VAL4_RESERVED3_XI (0xffffL<<16) #define BNX2_PCI_ID_VAL5 0x00000444 #define BNX2_PCI_ID_VAL5_D1_SUPPORT (1L<<0) @@ -556,6 +588,10 @@ struct l2_fhdr { #define BNX2_PCI_ID_VAL5_PME_IN_D1 (1L<<3) #define BNX2_PCI_ID_VAL5_PME_IN_D2 (1L<<4) #define BNX2_PCI_ID_VAL5_PME_IN_D3_HOT (1L<<5) +#define BNX2_PCI_ID_VAL5_RESERVED0_TE (0x3ffffffL<<6) +#define BNX2_PCI_ID_VAL5_PM_VERSION_XI (0x7L<<6) +#define BNX2_PCI_ID_VAL5_NO_SOFT_RESET_XI (1L<<9) +#define BNX2_PCI_ID_VAL5_RESERVED0_XI (0x3fffffL<<10) #define BNX2_PCI_PCIX_EXTENDED_STATUS 0x00000448 #define BNX2_PCI_PCIX_EXTENDED_STATUS_NO_SNOOP (1L<<8) @@ -567,12 +603,91 @@ struct l2_fhdr { #define BNX2_PCI_ID_VAL6_MAX_LAT (0xffL<<0) #define BNX2_PCI_ID_VAL6_MIN_GNT (0xffL<<8) #define BNX2_PCI_ID_VAL6_BIST (0xffL<<16) +#define BNX2_PCI_ID_VAL6_RESERVED0 (0xffL<<24) #define BNX2_PCI_MSI_DATA 0x00000450 -#define BNX2_PCI_MSI_DATA_PCI_MSI_DATA (0xffffL<<0) +#define BNX2_PCI_MSI_DATA_MSI_DATA (0xffffL<<0) #define BNX2_PCI_MSI_ADDR_H 0x00000454 #define BNX2_PCI_MSI_ADDR_L 0x00000458 +#define BNX2_PCI_MSI_ADDR_L_VAL (0x3fffffffL<<2) + +#define BNX2_PCI_CFG_ACCESS_CMD 0x0000045c +#define BNX2_PCI_CFG_ACCESS_CMD_ADR (0x3fL<<2) +#define BNX2_PCI_CFG_ACCESS_CMD_RD_REQ (1L<<27) +#define BNX2_PCI_CFG_ACCESS_CMD_WR_REQ (0xfL<<28) + +#define BNX2_PCI_CFG_ACCESS_DATA 0x00000460 +#define BNX2_PCI_MSI_MASK 0x00000464 +#define BNX2_PCI_MSI_MASK_MSI_MASK (0xffffffffL<<0) + +#define BNX2_PCI_MSI_PEND 0x00000468 +#define BNX2_PCI_MSI_PEND_MSI_PEND (0xffffffffL<<0) + +#define BNX2_PCI_PM_DATA_C 0x0000046c +#define BNX2_PCI_PM_DATA_C_PM_DATA_8_PRG (0xffL<<0) +#define BNX2_PCI_PM_DATA_C_RESERVED0 (0xffffffL<<8) + +#define BNX2_PCI_MSIX_CONTROL 0x000004c0 +#define BNX2_PCI_MSIX_CONTROL_MSIX_TBL_SIZ (0x7ffL<<0) +#define BNX2_PCI_MSIX_CONTROL_RESERVED0 (0x1fffffL<<11) + +#define BNX2_PCI_MSIX_TBL_OFF_BIR 0x000004c4 +#define BNX2_PCI_MSIX_TBL_OFF_BIR_MSIX_TBL_BIR (0x7L<<0) +#define BNX2_PCI_MSIX_TBL_OFF_BIR_MSIX_TBL_OFF (0x1fffffffL<<3) + +#define BNX2_PCI_MSIX_PBA_OFF_BIT 0x000004c8 +#define BNX2_PCI_MSIX_PBA_OFF_BIT_MSIX_PBA_BIR (0x7L<<0) +#define BNX2_PCI_MSIX_PBA_OFF_BIT_MSIX_PBA_OFF (0x1fffffffL<<3) + +#define BNX2_PCI_PCIE_CAPABILITY 0x000004d0 +#define BNX2_PCI_PCIE_CAPABILITY_INTERRUPT_MSG_NUM (0x1fL<<0) +#define BNX2_PCI_PCIE_CAPABILITY_COMPLY_PCIE_1_1 (1L<<5) + +#define BNX2_PCI_DEVICE_CAPABILITY 0x000004d4 +#define BNX2_PCI_DEVICE_CAPABILITY_MAX_PL_SIZ_SUPPORTED (0x7L<<0) +#define BNX2_PCI_DEVICE_CAPABILITY_EXTENDED_TAG_SUPPORT (1L<<5) +#define BNX2_PCI_DEVICE_CAPABILITY_L0S_ACCEPTABLE_LATENCY (0x7L<<6) +#define BNX2_PCI_DEVICE_CAPABILITY_L1_ACCEPTABLE_LATENCY (0x7L<<9) +#define BNX2_PCI_DEVICE_CAPABILITY_ROLE_BASED_ERR_RPT (1L<<15) + +#define BNX2_PCI_LINK_CAPABILITY 0x000004dc +#define BNX2_PCI_LINK_CAPABILITY_MAX_LINK_SPEED (0xfL<<0) +#define BNX2_PCI_LINK_CAPABILITY_MAX_LINK_SPEED_0001 (1L<<0) +#define BNX2_PCI_LINK_CAPABILITY_MAX_LINK_SPEED_0010 (1L<<0) +#define BNX2_PCI_LINK_CAPABILITY_MAX_LINK_WIDTH (0x1fL<<4) +#define BNX2_PCI_LINK_CAPABILITY_CLK_POWER_MGMT (1L<<9) +#define BNX2_PCI_LINK_CAPABILITY_ASPM_SUPPORT (0x3L<<10) +#define BNX2_PCI_LINK_CAPABILITY_L0S_EXIT_LAT (0x7L<<12) +#define BNX2_PCI_LINK_CAPABILITY_L0S_EXIT_LAT_101 (5L<<12) +#define BNX2_PCI_LINK_CAPABILITY_L0S_EXIT_LAT_110 (6L<<12) +#define BNX2_PCI_LINK_CAPABILITY_L1_EXIT_LAT (0x7L<<15) +#define BNX2_PCI_LINK_CAPABILITY_L1_EXIT_LAT_001 (1L<<15) +#define BNX2_PCI_LINK_CAPABILITY_L1_EXIT_LAT_010 (2L<<15) +#define BNX2_PCI_LINK_CAPABILITY_L0S_EXIT_COMM_LAT (0x7L<<18) +#define BNX2_PCI_LINK_CAPABILITY_L0S_EXIT_COMM_LAT_101 (5L<<18) +#define BNX2_PCI_LINK_CAPABILITY_L0S_EXIT_COMM_LAT_110 (6L<<18) +#define BNX2_PCI_LINK_CAPABILITY_L1_EXIT_COMM_LAT (0x7L<<21) +#define BNX2_PCI_LINK_CAPABILITY_L1_EXIT_COMM_LAT_001 (1L<<21) +#define BNX2_PCI_LINK_CAPABILITY_L1_EXIT_COMM_LAT_010 (2L<<21) +#define BNX2_PCI_LINK_CAPABILITY_PORT_NUM (0xffL<<24) + +#define BNX2_PCI_PCIE_DEVICE_CAPABILITY_2 0x000004e4 +#define BNX2_PCI_PCIE_DEVICE_CAPABILITY_2_CMPL_TO_RANGE_SUPP (0xfL<<0) +#define BNX2_PCI_PCIE_DEVICE_CAPABILITY_2_CMPL_TO_DISABL_SUPP (1L<<4) +#define BNX2_PCI_PCIE_DEVICE_CAPABILITY_2_RESERVED (0x7ffffffL<<5) + +#define BNX2_PCI_PCIE_LINK_CAPABILITY_2 0x000004e8 +#define BNX2_PCI_PCIE_LINK_CAPABILITY_2_RESERVED (0xffffffffL<<0) + +#define BNX2_PCI_GRC_WINDOW1_ADDR 0x00000610 +#define BNX2_PCI_GRC_WINDOW1_ADDR_VALUE (0x1ffL<<13) + +#define BNX2_PCI_GRC_WINDOW2_ADDR 0x00000614 +#define BNX2_PCI_GRC_WINDOW2_ADDR_VALUE (0x1ffL<<13) + +#define BNX2_PCI_GRC_WINDOW3_ADDR 0x00000618 +#define BNX2_PCI_GRC_WINDOW3_ADDR_VALUE (0x1ffL<<13) /* @@ -582,13 +697,23 @@ struct l2_fhdr { #define BNX2_MISC_COMMAND 0x00000800 #define BNX2_MISC_COMMAND_ENABLE_ALL (1L<<0) #define BNX2_MISC_COMMAND_DISABLE_ALL (1L<<1) -#define BNX2_MISC_COMMAND_CORE_RESET (1L<<4) -#define BNX2_MISC_COMMAND_HARD_RESET (1L<<5) +#define BNX2_MISC_COMMAND_SW_RESET (1L<<4) +#define BNX2_MISC_COMMAND_POR_RESET (1L<<5) +#define BNX2_MISC_COMMAND_HD_RESET (1L<<6) +#define BNX2_MISC_COMMAND_CMN_SW_RESET (1L<<7) #define BNX2_MISC_COMMAND_PAR_ERROR (1L<<8) +#define BNX2_MISC_COMMAND_CS16_ERR (1L<<9) +#define BNX2_MISC_COMMAND_CS16_ERR_LOC (0xfL<<12) #define BNX2_MISC_COMMAND_PAR_ERR_RAM (0x7fL<<16) +#define BNX2_MISC_COMMAND_POWERDOWN_EVENT (1L<<23) +#define BNX2_MISC_COMMAND_SW_SHUTDOWN (1L<<24) +#define BNX2_MISC_COMMAND_SHUTDOWN_EN (1L<<25) +#define BNX2_MISC_COMMAND_DINTEG_ATTN_EN (1L<<26) +#define BNX2_MISC_COMMAND_PCIE_LINK_IN_L23 (1L<<27) +#define BNX2_MISC_COMMAND_PCIE_DIS (1L<<28) #define BNX2_MISC_CFG 0x00000804 -#define BNX2_MISC_CFG_PCI_GRC_TMOUT (1L<<0) +#define BNX2_MISC_CFG_GRC_TMOUT (1L<<0) #define BNX2_MISC_CFG_NVM_WR_EN (0x3L<<1) #define BNX2_MISC_CFG_NVM_WR_EN_PROTECT (0L<<1) #define BNX2_MISC_CFG_NVM_WR_EN_PCI (1L<<1) @@ -596,16 +721,45 @@ struct l2_fhdr { #define BNX2_MISC_CFG_NVM_WR_EN_ALLOW2 (3L<<1) #define BNX2_MISC_CFG_BIST_EN (1L<<3) #define BNX2_MISC_CFG_CK25_OUT_ALT_SRC (1L<<4) -#define BNX2_MISC_CFG_BYPASS_BSCAN (1L<<5) -#define BNX2_MISC_CFG_BYPASS_EJTAG (1L<<6) +#define BNX2_MISC_CFG_RESERVED5_TE (1L<<5) +#define BNX2_MISC_CFG_RESERVED6_TE (1L<<6) #define BNX2_MISC_CFG_CLK_CTL_OVERRIDE (1L<<7) -#define BNX2_MISC_CFG_LEDMODE (0x3L<<8) +#define BNX2_MISC_CFG_LEDMODE (0x7L<<8) #define BNX2_MISC_CFG_LEDMODE_MAC (0L<<8) -#define BNX2_MISC_CFG_LEDMODE_GPHY1 (1L<<8) -#define BNX2_MISC_CFG_LEDMODE_GPHY2 (2L<<8) +#define BNX2_MISC_CFG_LEDMODE_PHY1_TE (1L<<8) +#define BNX2_MISC_CFG_LEDMODE_PHY2_TE (2L<<8) +#define BNX2_MISC_CFG_LEDMODE_PHY3_TE (3L<<8) +#define BNX2_MISC_CFG_LEDMODE_PHY4_TE (4L<<8) +#define BNX2_MISC_CFG_LEDMODE_PHY5_TE (5L<<8) +#define BNX2_MISC_CFG_LEDMODE_PHY6_TE (6L<<8) +#define BNX2_MISC_CFG_LEDMODE_PHY7_TE (7L<<8) +#define BNX2_MISC_CFG_MCP_GRC_TMOUT_TE (1L<<11) +#define BNX2_MISC_CFG_DBU_GRC_TMOUT_TE (1L<<12) +#define BNX2_MISC_CFG_LEDMODE_XI (0xfL<<8) +#define BNX2_MISC_CFG_LEDMODE_MAC_XI (0L<<8) +#define BNX2_MISC_CFG_LEDMODE_PHY1_XI (1L<<8) +#define BNX2_MISC_CFG_LEDMODE_PHY2_XI (2L<<8) +#define BNX2_MISC_CFG_LEDMODE_PHY3_XI (3L<<8) +#define BNX2_MISC_CFG_LEDMODE_MAC2_XI (4L<<8) +#define BNX2_MISC_CFG_LEDMODE_PHY4_XI (5L<<8) +#define BNX2_MISC_CFG_LEDMODE_PHY5_XI (6L<<8) +#define BNX2_MISC_CFG_LEDMODE_PHY6_XI (7L<<8) +#define BNX2_MISC_CFG_LEDMODE_MAC3_XI (8L<<8) +#define BNX2_MISC_CFG_LEDMODE_PHY7_XI (9L<<8) +#define BNX2_MISC_CFG_LEDMODE_PHY8_XI (10L<<8) +#define BNX2_MISC_CFG_LEDMODE_PHY9_XI (11L<<8) +#define BNX2_MISC_CFG_LEDMODE_MAC4_XI (12L<<8) +#define BNX2_MISC_CFG_LEDMODE_PHY10_XI (13L<<8) +#define BNX2_MISC_CFG_LEDMODE_PHY11_XI (14L<<8) +#define BNX2_MISC_CFG_LEDMODE_UNUSED_XI (15L<<8) +#define BNX2_MISC_CFG_PORT_SELECT_XI (1L<<13) +#define BNX2_MISC_CFG_PARITY_MODE_XI (1L<<14) #define BNX2_MISC_ID 0x00000808 #define BNX2_MISC_ID_BOND_ID (0xfL<<0) +#define BNX2_MISC_ID_BOND_ID_X (0L<<0) +#define BNX2_MISC_ID_BOND_ID_C (3L<<0) +#define BNX2_MISC_ID_BOND_ID_S (12L<<0) #define BNX2_MISC_ID_CHIP_METAL (0xffL<<4) #define BNX2_MISC_ID_CHIP_REV (0xfL<<12) #define BNX2_MISC_ID_CHIP_NUM (0xffffL<<16) @@ -639,6 +793,8 @@ struct l2_fhdr { #define BNX2_MISC_ENABLE_STATUS_BITS_TIMER_ENABLE (1L<<25) #define BNX2_MISC_ENABLE_STATUS_BITS_DMA_ENGINE_ENABLE (1L<<26) #define BNX2_MISC_ENABLE_STATUS_BITS_UMP_ENABLE (1L<<27) +#define BNX2_MISC_ENABLE_STATUS_BITS_RV2P_CMD_SCHEDULER_ENABLE (1L<<28) +#define BNX2_MISC_ENABLE_STATUS_BITS_RSVD_FUTURE_ENABLE (0x7L<<29) #define BNX2_MISC_ENABLE_SET_BITS 0x00000810 #define BNX2_MISC_ENABLE_SET_BITS_TX_SCHEDULER_ENABLE (1L<<0) @@ -669,6 +825,8 @@ struct l2_fhdr { #define BNX2_MISC_ENABLE_SET_BITS_TIMER_ENABLE (1L<<25) #define BNX2_MISC_ENABLE_SET_BITS_DMA_ENGINE_ENABLE (1L<<26) #define BNX2_MISC_ENABLE_SET_BITS_UMP_ENABLE (1L<<27) +#define BNX2_MISC_ENABLE_SET_BITS_RV2P_CMD_SCHEDULER_ENABLE (1L<<28) +#define BNX2_MISC_ENABLE_SET_BITS_RSVD_FUTURE_ENABLE (0x7L<<29) #define BNX2_MISC_ENABLE_CLR_BITS 0x00000814 #define BNX2_MISC_ENABLE_CLR_BITS_TX_SCHEDULER_ENABLE (1L<<0) @@ -699,6 +857,8 @@ struct l2_fhdr { #define BNX2_MISC_ENABLE_CLR_BITS_TIMER_ENABLE (1L<<25) #define BNX2_MISC_ENABLE_CLR_BITS_DMA_ENGINE_ENABLE (1L<<26) #define BNX2_MISC_ENABLE_CLR_BITS_UMP_ENABLE (1L<<27) +#define BNX2_MISC_ENABLE_CLR_BITS_RV2P_CMD_SCHEDULER_ENABLE (1L<<28) +#define BNX2_MISC_ENABLE_CLR_BITS_RSVD_FUTURE_ENABLE (0x7L<<29) #define BNX2_MISC_CLOCK_CONTROL_BITS 0x00000818 #define BNX2_MISC_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET (0xfL<<0) @@ -718,30 +878,41 @@ struct l2_fhdr { #define BNX2_MISC_CLOCK_CONTROL_BITS_CORE_CLK_ALT_SRC_12 (1L<<8) #define BNX2_MISC_CLOCK_CONTROL_BITS_CORE_CLK_ALT_SRC_6 (2L<<8) #define BNX2_MISC_CLOCK_CONTROL_BITS_CORE_CLK_ALT_SRC_62 (4L<<8) -#define BNX2_MISC_CLOCK_CONTROL_BITS_PLAY_DEAD (1L<<11) +#define BNX2_MISC_CLOCK_CONTROL_BITS_RESERVED0_XI (0x7L<<8) +#define BNX2_MISC_CLOCK_CONTROL_BITS_MIN_POWER (1L<<11) #define BNX2_MISC_CLOCK_CONTROL_BITS_CORE_CLK_PLL_SPEED (0xfL<<12) #define BNX2_MISC_CLOCK_CONTROL_BITS_CORE_CLK_PLL_SPEED_100 (0L<<12) #define BNX2_MISC_CLOCK_CONTROL_BITS_CORE_CLK_PLL_SPEED_80 (1L<<12) #define BNX2_MISC_CLOCK_CONTROL_BITS_CORE_CLK_PLL_SPEED_50 (2L<<12) #define BNX2_MISC_CLOCK_CONTROL_BITS_CORE_CLK_PLL_SPEED_40 (4L<<12) #define BNX2_MISC_CLOCK_CONTROL_BITS_CORE_CLK_PLL_SPEED_25 (8L<<12) +#define BNX2_MISC_CLOCK_CONTROL_BITS_RESERVED1_XI (0xfL<<12) #define BNX2_MISC_CLOCK_CONTROL_BITS_CORE_CLK_PLL_STOP (1L<<16) -#define BNX2_MISC_CLOCK_CONTROL_BITS_PCI_PLL_STOP (1L<<17) -#define BNX2_MISC_CLOCK_CONTROL_BITS_RESERVED_18 (1L<<18) -#define BNX2_MISC_CLOCK_CONTROL_BITS_USE_SPD_DET (1L<<19) -#define BNX2_MISC_CLOCK_CONTROL_BITS_RESERVED (0xfffL<<20) - -#define BNX2_MISC_GPIO 0x0000081c -#define BNX2_MISC_GPIO_VALUE (0xffL<<0) -#define BNX2_MISC_GPIO_SET (0xffL<<8) -#define BNX2_MISC_GPIO_CLR (0xffL<<16) -#define BNX2_MISC_GPIO_FLOAT (0xffL<<24) - -#define BNX2_MISC_GPIO_INT 0x00000820 -#define BNX2_MISC_GPIO_INT_INT_STATE (0xfL<<0) -#define BNX2_MISC_GPIO_INT_OLD_VALUE (0xfL<<8) -#define BNX2_MISC_GPIO_INT_OLD_SET (0xfL<<16) -#define BNX2_MISC_GPIO_INT_OLD_CLR (0xfL<<24) +#define BNX2_MISC_CLOCK_CONTROL_BITS_RESERVED_17_TE (1L<<17) +#define BNX2_MISC_CLOCK_CONTROL_BITS_RESERVED_18_TE (1L<<18) +#define BNX2_MISC_CLOCK_CONTROL_BITS_RESERVED_19_TE (1L<<19) +#define BNX2_MISC_CLOCK_CONTROL_BITS_RESERVED_TE (0xfffL<<20) +#define BNX2_MISC_CLOCK_CONTROL_BITS_CORE_CLK_ALT_MGMT_XI (1L<<17) +#define BNX2_MISC_CLOCK_CONTROL_BITS_RESERVED2_XI (0x3fL<<18) +#define BNX2_MISC_CLOCK_CONTROL_BITS_CORE_CLK_PLL_VCO_XI (0x7L<<24) +#define BNX2_MISC_CLOCK_CONTROL_BITS_RESERVED3_XI (1L<<27) +#define BNX2_MISC_CLOCK_CONTROL_BITS_CORE_CLK_PLL_SPEED_XI (0xfL<<28) + +#define BNX2_MISC_SPIO 0x0000081c +#define BNX2_MISC_SPIO_VALUE (0xffL<<0) +#define BNX2_MISC_SPIO_SET (0xffL<<8) +#define BNX2_MISC_SPIO_CLR (0xffL<<16) +#define BNX2_MISC_SPIO_FLOAT (0xffL<<24) + +#define BNX2_MISC_SPIO_INT 0x00000820 +#define BNX2_MISC_SPIO_INT_INT_STATE_TE (0xfL<<0) +#define BNX2_MISC_SPIO_INT_OLD_VALUE_TE (0xfL<<8) +#define BNX2_MISC_SPIO_INT_OLD_SET_TE (0xfL<<16) +#define BNX2_MISC_SPIO_INT_OLD_CLR_TE (0xfL<<24) +#define BNX2_MISC_SPIO_INT_INT_STATE_XI (0xffL<<0) +#define BNX2_MISC_SPIO_INT_OLD_VALUE_XI (0xffL<<8) +#define BNX2_MISC_SPIO_INT_OLD_SET_XI (0xffL<<16) +#define BNX2_MISC_SPIO_INT_OLD_CLR_XI (0xffL<<24) #define BNX2_MISC_CONFIG_LFSR 0x00000824 #define BNX2_MISC_CONFIG_LFSR_DIV (0xffffL<<0) @@ -775,6 +946,8 @@ struct l2_fhdr { #define BNX2_MISC_LFSR_MASK_BITS_TIMER_ENABLE (1L<<25) #define BNX2_MISC_LFSR_MASK_BITS_DMA_ENGINE_ENABLE (1L<<26) #define BNX2_MISC_LFSR_MASK_BITS_UMP_ENABLE (1L<<27) +#define BNX2_MISC_LFSR_MASK_BITS_RV2P_CMD_SCHEDULER_ENABLE (1L<<28) +#define BNX2_MISC_LFSR_MASK_BITS_RSVD_FUTURE_ENABLE (0x7L<<29) #define BNX2_MISC_ARB_REQ0 0x0000082c #define BNX2_MISC_ARB_REQ1 0x00000830 @@ -831,22 +1004,12 @@ struct l2_fhdr { #define BNX2_MISC_ARB_GNT3_30 (0x7L<<24) #define BNX2_MISC_ARB_GNT3_31 (0x7L<<28) -#define BNX2_MISC_PRBS_CONTROL 0x00000878 -#define BNX2_MISC_PRBS_CONTROL_EN (1L<<0) -#define BNX2_MISC_PRBS_CONTROL_RSTB (1L<<1) -#define BNX2_MISC_PRBS_CONTROL_INV (1L<<2) -#define BNX2_MISC_PRBS_CONTROL_ERR_CLR (1L<<3) -#define BNX2_MISC_PRBS_CONTROL_ORDER (0x3L<<4) -#define BNX2_MISC_PRBS_CONTROL_ORDER_7TH (0L<<4) -#define BNX2_MISC_PRBS_CONTROL_ORDER_15TH (1L<<4) -#define BNX2_MISC_PRBS_CONTROL_ORDER_23RD (2L<<4) -#define BNX2_MISC_PRBS_CONTROL_ORDER_31ST (3L<<4) - -#define BNX2_MISC_PRBS_STATUS 0x0000087c -#define BNX2_MISC_PRBS_STATUS_LOCK (1L<<0) -#define BNX2_MISC_PRBS_STATUS_STKY (1L<<1) -#define BNX2_MISC_PRBS_STATUS_ERRORS (0x3fffL<<2) -#define BNX2_MISC_PRBS_STATUS_STATE (0xfL<<16) +#define BNX2_MISC_RESERVED1 0x00000878 +#define BNX2_MISC_RESERVED1_MISC_RESERVED1_VALUE (0x3fL<<0) + +#define BNX2_MISC_RESERVED2 0x0000087c +#define BNX2_MISC_RESERVED2_PCIE_DIS (1L<<0) +#define BNX2_MISC_RESERVED2_LINK_IN_L23 (1L<<1) #define BNX2_MISC_SM_ASF_CONTROL 0x00000880 #define BNX2_MISC_SM_ASF_CONTROL_ASF_RST (1L<<0) @@ -857,13 +1020,15 @@ struct l2_fhdr { #define BNX2_MISC_SM_ASF_CONTROL_PL_TO (1L<<5) #define BNX2_MISC_SM_ASF_CONTROL_RT_TO (1L<<6) #define BNX2_MISC_SM_ASF_CONTROL_SMB_EVENT (1L<<7) -#define BNX2_MISC_SM_ASF_CONTROL_RES (0xfL<<8) +#define BNX2_MISC_SM_ASF_CONTROL_STRETCH_EN (1L<<8) +#define BNX2_MISC_SM_ASF_CONTROL_STRETCH_PULSE (1L<<9) +#define BNX2_MISC_SM_ASF_CONTROL_RES (0x3L<<10) #define BNX2_MISC_SM_ASF_CONTROL_SMB_EN (1L<<12) #define BNX2_MISC_SM_ASF_CONTROL_SMB_BB_EN (1L<<13) #define BNX2_MISC_SM_ASF_CONTROL_SMB_NO_ADDR_FILT (1L<<14) #define BNX2_MISC_SM_ASF_CONTROL_SMB_AUTOREAD (1L<<15) -#define BNX2_MISC_SM_ASF_CONTROL_NIC_SMB_ADDR1 (0x3fL<<16) -#define BNX2_MISC_SM_ASF_CONTROL_NIC_SMB_ADDR2 (0x3fL<<24) +#define BNX2_MISC_SM_ASF_CONTROL_NIC_SMB_ADDR1 (0x7fL<<16) +#define BNX2_MISC_SM_ASF_CONTROL_NIC_SMB_ADDR2 (0x7fL<<23) #define BNX2_MISC_SM_ASF_CONTROL_EN_NIC_SMB_ADDR_0 (1L<<30) #define BNX2_MISC_SM_ASF_CONTROL_SMB_EARLY_ATTN (1L<<31) @@ -891,13 +1056,13 @@ struct l2_fhdr { #define BNX2_MISC_SMB_OUT_SMB_OUT_STATUS (0xfL<<20) #define BNX2_MISC_SMB_OUT_SMB_OUT_STATUS_OK (0L<<20) #define BNX2_MISC_SMB_OUT_SMB_OUT_STATUS_FIRST_NACK (1L<<20) -#define BNX2_MISC_SMB_OUT_SMB_OUT_STATUS_SUB_NACK (9L<<20) #define BNX2_MISC_SMB_OUT_SMB_OUT_STATUS_UFLOW (2L<<20) #define BNX2_MISC_SMB_OUT_SMB_OUT_STATUS_STOP (3L<<20) #define BNX2_MISC_SMB_OUT_SMB_OUT_STATUS_TIMEOUT (4L<<20) #define BNX2_MISC_SMB_OUT_SMB_OUT_STATUS_FIRST_LOST (5L<<20) +#define BNX2_MISC_SMB_OUT_SMB_OUT_STATUS_BADACK (6L<<20) +#define BNX2_MISC_SMB_OUT_SMB_OUT_STATUS_SUB_NACK (9L<<20) #define BNX2_MISC_SMB_OUT_SMB_OUT_STATUS_SUB_LOST (0xdL<<20) -#define BNX2_MISC_SMB_OUT_SMB_OUT_STATUS_BADACK (0x6L<<20) #define BNX2_MISC_SMB_OUT_SMB_OUT_SLAVEMODE (1L<<24) #define BNX2_MISC_SMB_OUT_SMB_OUT_DAT_EN (1L<<25) #define BNX2_MISC_SMB_OUT_SMB_OUT_DAT_IN (1L<<26) @@ -955,6 +1120,38 @@ struct l2_fhdr { #define BNX2_MISC_PERR_ENA0_RDE_MISC_RPC (1L<<29) #define BNX2_MISC_PERR_ENA0_RDE_MISC_RPM (1L<<30) #define BNX2_MISC_PERR_ENA0_RV2P_MISC_CB0REGS (1L<<31) +#define BNX2_MISC_PERR_ENA0_COM_DMAE_PERR_EN_XI (1L<<0) +#define BNX2_MISC_PERR_ENA0_CP_DMAE_PERR_EN_XI (1L<<1) +#define BNX2_MISC_PERR_ENA0_RPM_ACPIBEMEM_PERR_EN_XI (1L<<2) +#define BNX2_MISC_PERR_ENA0_CTX_USAGE_CNT_PERR_EN_XI (1L<<3) +#define BNX2_MISC_PERR_ENA0_CTX_PGTBL_PERR_EN_XI (1L<<4) +#define BNX2_MISC_PERR_ENA0_CTX_CACHE_PERR_EN_XI (1L<<5) +#define BNX2_MISC_PERR_ENA0_CTX_MIRROR_PERR_EN_XI (1L<<6) +#define BNX2_MISC_PERR_ENA0_COM_CTXC_PERR_EN_XI (1L<<7) +#define BNX2_MISC_PERR_ENA0_COM_SCPAD_PERR_EN_XI (1L<<8) +#define BNX2_MISC_PERR_ENA0_CP_CTXC_PERR_EN_XI (1L<<9) +#define BNX2_MISC_PERR_ENA0_CP_SCPAD_PERR_EN_XI (1L<<10) +#define BNX2_MISC_PERR_ENA0_RXP_RBUFC_PERR_EN_XI (1L<<11) +#define BNX2_MISC_PERR_ENA0_RXP_CTXC_PERR_EN_XI (1L<<12) +#define BNX2_MISC_PERR_ENA0_RXP_SCPAD_PERR_EN_XI (1L<<13) +#define BNX2_MISC_PERR_ENA0_TPAT_SCPAD_PERR_EN_XI (1L<<14) +#define BNX2_MISC_PERR_ENA0_TXP_CTXC_PERR_EN_XI (1L<<15) +#define BNX2_MISC_PERR_ENA0_TXP_SCPAD_PERR_EN_XI (1L<<16) +#define BNX2_MISC_PERR_ENA0_CS_TMEM_PERR_EN_XI (1L<<17) +#define BNX2_MISC_PERR_ENA0_MQ_CTX_PERR_EN_XI (1L<<18) +#define BNX2_MISC_PERR_ENA0_RPM_DFIFOMEM_PERR_EN_XI (1L<<19) +#define BNX2_MISC_PERR_ENA0_RPC_DFIFOMEM_PERR_EN_XI (1L<<20) +#define BNX2_MISC_PERR_ENA0_RBUF_PTRMEM_PERR_EN_XI (1L<<21) +#define BNX2_MISC_PERR_ENA0_RBUF_DATAMEM_PERR_EN_XI (1L<<22) +#define BNX2_MISC_PERR_ENA0_RV2P_P2IRAM_PERR_EN_XI (1L<<23) +#define BNX2_MISC_PERR_ENA0_RV2P_P1IRAM_PERR_EN_XI (1L<<24) +#define BNX2_MISC_PERR_ENA0_RV2P_CB1REGS_PERR_EN_XI (1L<<25) +#define BNX2_MISC_PERR_ENA0_RV2P_CB0REGS_PERR_EN_XI (1L<<26) +#define BNX2_MISC_PERR_ENA0_TPBUF_PERR_EN_XI (1L<<27) +#define BNX2_MISC_PERR_ENA0_THBUF_PERR_EN_XI (1L<<28) +#define BNX2_MISC_PERR_ENA0_TDMA_PERR_EN_XI (1L<<29) +#define BNX2_MISC_PERR_ENA0_TBDC_PERR_EN_XI (1L<<30) +#define BNX2_MISC_PERR_ENA0_TSCH_LR_PERR_EN_XI (1L<<31) #define BNX2_MISC_PERR_ENA1 0x000008a8 #define BNX2_MISC_PERR_ENA1_RV2P_MISC_CB1REGS (1L<<0) @@ -989,6 +1186,35 @@ struct l2_fhdr { #define BNX2_MISC_PERR_ENA1_RXPQ_MISC (1L<<29) #define BNX2_MISC_PERR_ENA1_RXPCQ_MISC (1L<<30) #define BNX2_MISC_PERR_ENA1_RLUPQ_MISC (1L<<31) +#define BNX2_MISC_PERR_ENA1_RBDC_PERR_EN_XI (1L<<0) +#define BNX2_MISC_PERR_ENA1_RDMA_DFIFO_PERR_EN_XI (1L<<2) +#define BNX2_MISC_PERR_ENA1_HC_STATS_PERR_EN_XI (1L<<3) +#define BNX2_MISC_PERR_ENA1_HC_MSIX_PERR_EN_XI (1L<<4) +#define BNX2_MISC_PERR_ENA1_HC_PRODUCSTB_PERR_EN_XI (1L<<5) +#define BNX2_MISC_PERR_ENA1_HC_CONSUMSTB_PERR_EN_XI (1L<<6) +#define BNX2_MISC_PERR_ENA1_TPATQ_PERR_EN_XI (1L<<7) +#define BNX2_MISC_PERR_ENA1_MCPQ_PERR_EN_XI (1L<<8) +#define BNX2_MISC_PERR_ENA1_TDMAQ_PERR_EN_XI (1L<<9) +#define BNX2_MISC_PERR_ENA1_TXPQ_PERR_EN_XI (1L<<10) +#define BNX2_MISC_PERR_ENA1_COMTQ_PERR_EN_XI (1L<<11) +#define BNX2_MISC_PERR_ENA1_COMQ_PERR_EN_XI (1L<<12) +#define BNX2_MISC_PERR_ENA1_RLUPQ_PERR_EN_XI (1L<<13) +#define BNX2_MISC_PERR_ENA1_RXPQ_PERR_EN_XI (1L<<14) +#define BNX2_MISC_PERR_ENA1_RV2PPQ_PERR_EN_XI (1L<<15) +#define BNX2_MISC_PERR_ENA1_RDMAQ_PERR_EN_XI (1L<<16) +#define BNX2_MISC_PERR_ENA1_TASQ_PERR_EN_XI (1L<<17) +#define BNX2_MISC_PERR_ENA1_TBDRQ_PERR_EN_XI (1L<<18) +#define BNX2_MISC_PERR_ENA1_TSCHQ_PERR_EN_XI (1L<<19) +#define BNX2_MISC_PERR_ENA1_COMXQ_PERR_EN_XI (1L<<20) +#define BNX2_MISC_PERR_ENA1_RXPCQ_PERR_EN_XI (1L<<21) +#define BNX2_MISC_PERR_ENA1_RV2PTQ_PERR_EN_XI (1L<<22) +#define BNX2_MISC_PERR_ENA1_RV2PMQ_PERR_EN_XI (1L<<23) +#define BNX2_MISC_PERR_ENA1_CPQ_PERR_EN_XI (1L<<24) +#define BNX2_MISC_PERR_ENA1_CSQ_PERR_EN_XI (1L<<25) +#define BNX2_MISC_PERR_ENA1_RLUP_CID_PERR_EN_XI (1L<<26) +#define BNX2_MISC_PERR_ENA1_RV2PCS_TMEM_PERR_EN_XI (1L<<27) +#define BNX2_MISC_PERR_ENA1_RV2PCSQ_PERR_EN_XI (1L<<28) +#define BNX2_MISC_PERR_ENA1_MQ_IDX_PERR_EN_XI (1L<<29) #define BNX2_MISC_PERR_ENA2 0x000008ac #define BNX2_MISC_PERR_ENA2_COMQ_MISC (1L<<0) @@ -1000,19 +1226,498 @@ struct l2_fhdr { #define BNX2_MISC_PERR_ENA2_TDMAQ_MISC (1L<<6) #define BNX2_MISC_PERR_ENA2_TPATQ_MISC (1L<<7) #define BNX2_MISC_PERR_ENA2_TASQ_MISC (1L<<8) +#define BNX2_MISC_PERR_ENA2_TGT_FIFO_PERR_EN_XI (1L<<0) +#define BNX2_MISC_PERR_ENA2_UMP_TX_PERR_EN_XI (1L<<1) +#define BNX2_MISC_PERR_ENA2_UMP_RX_PERR_EN_XI (1L<<2) +#define BNX2_MISC_PERR_ENA2_MCP_ROM_PERR_EN_XI (1L<<3) +#define BNX2_MISC_PERR_ENA2_MCP_SCPAD_PERR_EN_XI (1L<<4) +#define BNX2_MISC_PERR_ENA2_HB_MEM_PERR_EN_XI (1L<<5) +#define BNX2_MISC_PERR_ENA2_PCIE_REPLAY_PERR_EN_XI (1L<<6) #define BNX2_MISC_DEBUG_VECTOR_SEL 0x000008b0 #define BNX2_MISC_DEBUG_VECTOR_SEL_0 (0xfffL<<0) #define BNX2_MISC_DEBUG_VECTOR_SEL_1 (0xfffL<<12) +#define BNX2_MISC_DEBUG_VECTOR_SEL_1_XI (0xfffL<<15) #define BNX2_MISC_VREG_CONTROL 0x000008b4 #define BNX2_MISC_VREG_CONTROL_1_2 (0xfL<<0) +#define BNX2_MISC_VREG_CONTROL_1_0_MAIN_XI (0xfL<<0) +#define BNX2_MISC_VREG_CONTROL_1_0_MAIN_PLUS14_XI (0L<<0) +#define BNX2_MISC_VREG_CONTROL_1_0_MAIN_PLUS12_XI (1L<<0) +#define BNX2_MISC_VREG_CONTROL_1_0_MAIN_PLUS10_XI (2L<<0) +#define BNX2_MISC_VREG_CONTROL_1_0_MAIN_PLUS8_XI (3L<<0) +#define BNX2_MISC_VREG_CONTROL_1_0_MAIN_PLUS6_XI (4L<<0) +#define BNX2_MISC_VREG_CONTROL_1_0_MAIN_PLUS4_XI (5L<<0) +#define BNX2_MISC_VREG_CONTROL_1_0_MAIN_PLUS2_XI (6L<<0) +#define BNX2_MISC_VREG_CONTROL_1_0_MAIN_NOM_XI (7L<<0) +#define BNX2_MISC_VREG_CONTROL_1_0_MAIN_MINUS2_XI (8L<<0) +#define BNX2_MISC_VREG_CONTROL_1_0_MAIN_MINUS4_XI (9L<<0) +#define BNX2_MISC_VREG_CONTROL_1_0_MAIN_MINUS6_XI (10L<<0) +#define BNX2_MISC_VREG_CONTROL_1_0_MAIN_MINUS8_XI (11L<<0) +#define BNX2_MISC_VREG_CONTROL_1_0_MAIN_MINUS10_XI (12L<<0) +#define BNX2_MISC_VREG_CONTROL_1_0_MAIN_MINUS12_XI (13L<<0) +#define BNX2_MISC_VREG_CONTROL_1_0_MAIN_MINUS14_XI (14L<<0) +#define BNX2_MISC_VREG_CONTROL_1_0_MAIN_MINUS16_XI (15L<<0) #define BNX2_MISC_VREG_CONTROL_2_5 (0xfL<<4) +#define BNX2_MISC_VREG_CONTROL_2_5_PLUS14 (0L<<4) +#define BNX2_MISC_VREG_CONTROL_2_5_PLUS12 (1L<<4) +#define BNX2_MISC_VREG_CONTROL_2_5_PLUS10 (2L<<4) +#define BNX2_MISC_VREG_CONTROL_2_5_PLUS8 (3L<<4) +#define BNX2_MISC_VREG_CONTROL_2_5_PLUS6 (4L<<4) +#define BNX2_MISC_VREG_CONTROL_2_5_PLUS4 (5L<<4) +#define BNX2_MISC_VREG_CONTROL_2_5_PLUS2 (6L<<4) +#define BNX2_MISC_VREG_CONTROL_2_5_NOM (7L<<4) +#define BNX2_MISC_VREG_CONTROL_2_5_MINUS2 (8L<<4) +#define BNX2_MISC_VREG_CONTROL_2_5_MINUS4 (9L<<4) +#define BNX2_MISC_VREG_CONTROL_2_5_MINUS6 (10L<<4) +#define BNX2_MISC_VREG_CONTROL_2_5_MINUS8 (11L<<4) +#define BNX2_MISC_VREG_CONTROL_2_5_MINUS10 (12L<<4) +#define BNX2_MISC_VREG_CONTROL_2_5_MINUS12 (13L<<4) +#define BNX2_MISC_VREG_CONTROL_2_5_MINUS14 (14L<<4) +#define BNX2_MISC_VREG_CONTROL_2_5_MINUS16 (15L<<4) +#define BNX2_MISC_VREG_CONTROL_1_0_MGMT (0xfL<<8) +#define BNX2_MISC_VREG_CONTROL_1_0_MGMT_PLUS14 (0L<<8) +#define BNX2_MISC_VREG_CONTROL_1_0_MGMT_PLUS12 (1L<<8) +#define BNX2_MISC_VREG_CONTROL_1_0_MGMT_PLUS10 (2L<<8) +#define BNX2_MISC_VREG_CONTROL_1_0_MGMT_PLUS8 (3L<<8) +#define BNX2_MISC_VREG_CONTROL_1_0_MGMT_PLUS6 (4L<<8) +#define BNX2_MISC_VREG_CONTROL_1_0_MGMT_PLUS4 (5L<<8) +#define BNX2_MISC_VREG_CONTROL_1_0_MGMT_PLUS2 (6L<<8) +#define BNX2_MISC_VREG_CONTROL_1_0_MGMT_NOM (7L<<8) +#define BNX2_MISC_VREG_CONTROL_1_0_MGMT_MINUS2 (8L<<8) +#define BNX2_MISC_VREG_CONTROL_1_0_MGMT_MINUS4 (9L<<8) +#define BNX2_MISC_VREG_CONTROL_1_0_MGMT_MINUS6 (10L<<8) +#define BNX2_MISC_VREG_CONTROL_1_0_MGMT_MINUS8 (11L<<8) +#define BNX2_MISC_VREG_CONTROL_1_0_MGMT_MINUS10 (12L<<8) +#define BNX2_MISC_VREG_CONTROL_1_0_MGMT_MINUS12 (13L<<8) +#define BNX2_MISC_VREG_CONTROL_1_0_MGMT_MINUS14 (14L<<8) +#define BNX2_MISC_VREG_CONTROL_1_0_MGMT_MINUS16 (15L<<8) #define BNX2_MISC_FINAL_CLK_CTL_VAL 0x000008b8 #define BNX2_MISC_FINAL_CLK_CTL_VAL_MISC_FINAL_CLK_CTL_VAL (0x3ffffffL<<6) -#define BNX2_MISC_UNUSED0 0x000008bc +#define BNX2_MISC_GP_HW_CTL0 0x000008bc +#define BNX2_MISC_GP_HW_CTL0_TX_DRIVE (1L<<0) +#define BNX2_MISC_GP_HW_CTL0_RMII_MODE (1L<<1) +#define BNX2_MISC_GP_HW_CTL0_RMII_CRSDV_SEL (1L<<2) +#define BNX2_MISC_GP_HW_CTL0_RVMII_MODE (1L<<3) +#define BNX2_MISC_GP_HW_CTL0_FLASH_SAMP_SCLK_NEGEDGE_TE (1L<<4) +#define BNX2_MISC_GP_HW_CTL0_HIDDEN_REVISION_ID_TE (1L<<5) +#define BNX2_MISC_GP_HW_CTL0_HC_CNTL_TMOUT_CTR_RST_TE (1L<<6) +#define BNX2_MISC_GP_HW_CTL0_RESERVED1_XI (0x7L<<4) +#define BNX2_MISC_GP_HW_CTL0_ENA_CORE_RST_ON_MAIN_PWR_GOING_AWAY (1L<<7) +#define BNX2_MISC_GP_HW_CTL0_ENA_SEL_VAUX_B_IN_L2_TE (1L<<8) +#define BNX2_MISC_GP_HW_CTL0_GRC_BNK_FREE_FIX_TE (1L<<9) +#define BNX2_MISC_GP_HW_CTL0_LED_ACT_SEL_TE (1L<<10) +#define BNX2_MISC_GP_HW_CTL0_RESERVED2_XI (0x7L<<8) +#define BNX2_MISC_GP_HW_CTL0_UP1_DEF0 (1L<<11) +#define BNX2_MISC_GP_HW_CTL0_FIBER_MODE_DIS_DEF (1L<<12) +#define BNX2_MISC_GP_HW_CTL0_FORCE2500_DEF (1L<<13) +#define BNX2_MISC_GP_HW_CTL0_AUTODETECT_DIS_DEF (1L<<14) +#define BNX2_MISC_GP_HW_CTL0_PARALLEL_DETECT_DEF (1L<<15) +#define BNX2_MISC_GP_HW_CTL0_OSCCTRL_DAI (0xfL<<16) +#define BNX2_MISC_GP_HW_CTL0_OSCCTRL_DAI_3MA (0L<<16) +#define BNX2_MISC_GP_HW_CTL0_OSCCTRL_DAI_2P5MA (1L<<16) +#define BNX2_MISC_GP_HW_CTL0_OSCCTRL_DAI_2P0MA (3L<<16) +#define BNX2_MISC_GP_HW_CTL0_OSCCTRL_DAI_1P5MA (5L<<16) +#define BNX2_MISC_GP_HW_CTL0_OSCCTRL_DAI_1P0MA (7L<<16) +#define BNX2_MISC_GP_HW_CTL0_OSCCTRL_DAI_PWRDN (15L<<16) +#define BNX2_MISC_GP_HW_CTL0_OSCCTRL_PRE2DIS (1L<<20) +#define BNX2_MISC_GP_HW_CTL0_OSCCTRL_PRE1DIS (1L<<21) +#define BNX2_MISC_GP_HW_CTL0_OSCCTRL_CTAT (0x3L<<22) +#define BNX2_MISC_GP_HW_CTL0_OSCCTRL_CTAT_M6P (0L<<22) +#define BNX2_MISC_GP_HW_CTL0_OSCCTRL_CTAT_M0P (1L<<22) +#define BNX2_MISC_GP_HW_CTL0_OSCCTRL_CTAT_P0P (2L<<22) +#define BNX2_MISC_GP_HW_CTL0_OSCCTRL_CTAT_P6P (3L<<22) +#define BNX2_MISC_GP_HW_CTL0_OSCCTRL_PTAT (0x3L<<24) +#define BNX2_MISC_GP_HW_CTL0_OSCCTRL_PTAT_M6P (0L<<24) +#define BNX2_MISC_GP_HW_CTL0_OSCCTRL_PTAT_M0P (1L<<24) +#define BNX2_MISC_GP_HW_CTL0_OSCCTRL_PTAT_P0P (2L<<24) +#define BNX2_MISC_GP_HW_CTL0_OSCCTRL_PTAT_P6P (3L<<24) +#define BNX2_MISC_GP_HW_CTL0_OSCCTRL_IAMP_ADJ (0x3L<<26) +#define BNX2_MISC_GP_HW_CTL0_OSCCTRL_IAMP_ADJ_240UA (0L<<26) +#define BNX2_MISC_GP_HW_CTL0_OSCCTRL_IAMP_ADJ_160UA (1L<<26) +#define BNX2_MISC_GP_HW_CTL0_OSCCTRL_IAMP_ADJ_400UA (2L<<26) +#define BNX2_MISC_GP_HW_CTL0_OSCCTRL_IAMP_ADJ_320UA (3L<<26) +#define BNX2_MISC_GP_HW_CTL0_OSCCTRL_ICBUF_ADJ (0x3L<<28) +#define BNX2_MISC_GP_HW_CTL0_OSCCTRL_ICBUF_ADJ_240UA (0L<<28) +#define BNX2_MISC_GP_HW_CTL0_OSCCTRL_ICBUF_ADJ_160UA (1L<<28) +#define BNX2_MISC_GP_HW_CTL0_OSCCTRL_ICBUF_ADJ_400UA (2L<<28) +#define BNX2_MISC_GP_HW_CTL0_OSCCTRL_ICBUF_ADJ_320UA (3L<<28) +#define BNX2_MISC_GP_HW_CTL0_OSCCTRL_XTAL_ADJ (0x3L<<30) +#define BNX2_MISC_GP_HW_CTL0_OSCCTRL_XTAL_ADJ_1P57 (0L<<30) +#define BNX2_MISC_GP_HW_CTL0_OSCCTRL_XTAL_ADJ_1P45 (1L<<30) +#define BNX2_MISC_GP_HW_CTL0_OSCCTRL_XTAL_ADJ_1P62 (2L<<30) +#define BNX2_MISC_GP_HW_CTL0_OSCCTRL_XTAL_ADJ_1P66 (3L<<30) + +#define BNX2_MISC_GP_HW_CTL1 0x000008c0 +#define BNX2_MISC_GP_HW_CTL1_1_ATTN_BTN_PRSNT_TE (1L<<0) +#define BNX2_MISC_GP_HW_CTL1_1_ATTN_IND_PRSNT_TE (1L<<1) +#define BNX2_MISC_GP_HW_CTL1_1_PWR_IND_PRSNT_TE (1L<<2) +#define BNX2_MISC_GP_HW_CTL1_0_PCIE_LOOPBACK_TE (1L<<3) +#define BNX2_MISC_GP_HW_CTL1_RESERVED_SOFT_XI (0xffffL<<0) +#define BNX2_MISC_GP_HW_CTL1_RESERVED_HARD_XI (0xffffL<<16) + +#define BNX2_MISC_NEW_HW_CTL 0x000008c4 +#define BNX2_MISC_NEW_HW_CTL_MAIN_POR_BYPASS (1L<<0) +#define BNX2_MISC_NEW_HW_CTL_RINGOSC_ENABLE (1L<<1) +#define BNX2_MISC_NEW_HW_CTL_RINGOSC_SEL0 (1L<<2) +#define BNX2_MISC_NEW_HW_CTL_RINGOSC_SEL1 (1L<<3) +#define BNX2_MISC_NEW_HW_CTL_RESERVED_SHARED (0xfffL<<4) +#define BNX2_MISC_NEW_HW_CTL_RESERVED_SPLIT (0xffffL<<16) + +#define BNX2_MISC_NEW_CORE_CTL 0x000008c8 +#define BNX2_MISC_NEW_CORE_CTL_LINK_HOLDOFF_SUCCESS (1L<<0) +#define BNX2_MISC_NEW_CORE_CTL_LINK_HOLDOFF_REQ (1L<<1) +#define BNX2_MISC_NEW_CORE_CTL_RESERVED_CMN (0x3fffL<<2) +#define BNX2_MISC_NEW_CORE_CTL_RESERVED_TC (0xffffL<<16) + +#define BNX2_MISC_ECO_HW_CTL 0x000008cc +#define BNX2_MISC_ECO_HW_CTL_LARGE_GRC_TMOUT_EN (1L<<0) +#define BNX2_MISC_ECO_HW_CTL_RESERVED_SOFT (0x7fffL<<1) +#define BNX2_MISC_ECO_HW_CTL_RESERVED_HARD (0xffffL<<16) + +#define BNX2_MISC_ECO_CORE_CTL 0x000008d0 +#define BNX2_MISC_ECO_CORE_CTL_RESERVED_SOFT (0xffffL<<0) +#define BNX2_MISC_ECO_CORE_CTL_RESERVED_HARD (0xffffL<<16) + +#define BNX2_MISC_PPIO 0x000008d4 +#define BNX2_MISC_PPIO_VALUE (0xfL<<0) +#define BNX2_MISC_PPIO_SET (0xfL<<8) +#define BNX2_MISC_PPIO_CLR (0xfL<<16) +#define BNX2_MISC_PPIO_FLOAT (0xfL<<24) + +#define BNX2_MISC_PPIO_INT 0x000008d8 +#define BNX2_MISC_PPIO_INT_INT_STATE (0xfL<<0) +#define BNX2_MISC_PPIO_INT_OLD_VALUE (0xfL<<8) +#define BNX2_MISC_PPIO_INT_OLD_SET (0xfL<<16) +#define BNX2_MISC_PPIO_INT_OLD_CLR (0xfL<<24) + +#define BNX2_MISC_RESET_NUMS 0x000008dc +#define BNX2_MISC_RESET_NUMS_NUM_HARD_RESETS (0x7L<<0) +#define BNX2_MISC_RESET_NUMS_NUM_PCIE_RESETS (0x7L<<4) +#define BNX2_MISC_RESET_NUMS_NUM_PERSTB_RESETS (0x7L<<8) +#define BNX2_MISC_RESET_NUMS_NUM_CMN_RESETS (0x7L<<12) +#define BNX2_MISC_RESET_NUMS_NUM_PORT_RESETS (0x7L<<16) + +#define BNX2_MISC_CS16_ERR 0x000008e0 +#define BNX2_MISC_CS16_ERR_ENA_PCI (1L<<0) +#define BNX2_MISC_CS16_ERR_ENA_RDMA (1L<<1) +#define BNX2_MISC_CS16_ERR_ENA_TDMA (1L<<2) +#define BNX2_MISC_CS16_ERR_ENA_EMAC (1L<<3) +#define BNX2_MISC_CS16_ERR_ENA_CTX (1L<<4) +#define BNX2_MISC_CS16_ERR_ENA_TBDR (1L<<5) +#define BNX2_MISC_CS16_ERR_ENA_RBDC (1L<<6) +#define BNX2_MISC_CS16_ERR_ENA_COM (1L<<7) +#define BNX2_MISC_CS16_ERR_ENA_CP (1L<<8) +#define BNX2_MISC_CS16_ERR_STA_PCI (1L<<16) +#define BNX2_MISC_CS16_ERR_STA_RDMA (1L<<17) +#define BNX2_MISC_CS16_ERR_STA_TDMA (1L<<18) +#define BNX2_MISC_CS16_ERR_STA_EMAC (1L<<19) +#define BNX2_MISC_CS16_ERR_STA_CTX (1L<<20) +#define BNX2_MISC_CS16_ERR_STA_TBDR (1L<<21) +#define BNX2_MISC_CS16_ERR_STA_RBDC (1L<<22) +#define BNX2_MISC_CS16_ERR_STA_COM (1L<<23) +#define BNX2_MISC_CS16_ERR_STA_CP (1L<<24) + +#define BNX2_MISC_SPIO_EVENT 0x000008e4 +#define BNX2_MISC_SPIO_EVENT_ENABLE (0xffL<<0) + +#define BNX2_MISC_PPIO_EVENT 0x000008e8 +#define BNX2_MISC_PPIO_EVENT_ENABLE (0xfL<<0) + +#define BNX2_MISC_DUAL_MEDIA_CTRL 0x000008ec +#define BNX2_MISC_DUAL_MEDIA_CTRL_BOND_ID (0xffL<<0) +#define BNX2_MISC_DUAL_MEDIA_CTRL_BOND_ID_X (0L<<0) +#define BNX2_MISC_DUAL_MEDIA_CTRL_BOND_ID_C (3L<<0) +#define BNX2_MISC_DUAL_MEDIA_CTRL_BOND_ID_S (12L<<0) +#define BNX2_MISC_DUAL_MEDIA_CTRL_PHY_CTRL_STRAP (0x7L<<8) +#define BNX2_MISC_DUAL_MEDIA_CTRL_PORT_SWAP_PIN (1L<<11) +#define BNX2_MISC_DUAL_MEDIA_CTRL_SERDES1_SIGDET (1L<<12) +#define BNX2_MISC_DUAL_MEDIA_CTRL_SERDES0_SIGDET (1L<<13) +#define BNX2_MISC_DUAL_MEDIA_CTRL_PHY1_SIGDET (1L<<14) +#define BNX2_MISC_DUAL_MEDIA_CTRL_PHY0_SIGDET (1L<<15) +#define BNX2_MISC_DUAL_MEDIA_CTRL_LCPLL_RST (1L<<16) +#define BNX2_MISC_DUAL_MEDIA_CTRL_SERDES1_RST (1L<<17) +#define BNX2_MISC_DUAL_MEDIA_CTRL_SERDES0_RST (1L<<18) +#define BNX2_MISC_DUAL_MEDIA_CTRL_PHY1_RST (1L<<19) +#define BNX2_MISC_DUAL_MEDIA_CTRL_PHY0_RST (1L<<20) +#define BNX2_MISC_DUAL_MEDIA_CTRL_PHY_CTRL (0x7L<<21) +#define BNX2_MISC_DUAL_MEDIA_CTRL_PORT_SWAP (1L<<24) +#define BNX2_MISC_DUAL_MEDIA_CTRL_STRAP_OVERRIDE (1L<<25) +#define BNX2_MISC_DUAL_MEDIA_CTRL_PHY_SERDES_IDDQ (0xfL<<26) +#define BNX2_MISC_DUAL_MEDIA_CTRL_PHY_SERDES_IDDQ_SER1_IDDQ (1L<<26) +#define BNX2_MISC_DUAL_MEDIA_CTRL_PHY_SERDES_IDDQ_SER0_IDDQ (2L<<26) +#define BNX2_MISC_DUAL_MEDIA_CTRL_PHY_SERDES_IDDQ_PHY1_IDDQ (4L<<26) +#define BNX2_MISC_DUAL_MEDIA_CTRL_PHY_SERDES_IDDQ_PHY0_IDDQ (8L<<26) + +#define BNX2_MISC_OTP_CMD1 0x000008f0 +#define BNX2_MISC_OTP_CMD1_FMODE (0x7L<<0) +#define BNX2_MISC_OTP_CMD1_FMODE_IDLE (0L<<0) +#define BNX2_MISC_OTP_CMD1_FMODE_WRITE (1L<<0) +#define BNX2_MISC_OTP_CMD1_FMODE_INIT (2L<<0) +#define BNX2_MISC_OTP_CMD1_FMODE_SET (3L<<0) +#define BNX2_MISC_OTP_CMD1_FMODE_RST (4L<<0) +#define BNX2_MISC_OTP_CMD1_FMODE_VERIFY (5L<<0) +#define BNX2_MISC_OTP_CMD1_FMODE_RESERVED0 (6L<<0) +#define BNX2_MISC_OTP_CMD1_FMODE_RESERVED1 (7L<<0) +#define BNX2_MISC_OTP_CMD1_USEPINS (1L<<8) +#define BNX2_MISC_OTP_CMD1_PROGSEL (1L<<9) +#define BNX2_MISC_OTP_CMD1_PROGSTART (1L<<10) +#define BNX2_MISC_OTP_CMD1_PCOUNT (0x7L<<16) +#define BNX2_MISC_OTP_CMD1_PBYP (1L<<19) +#define BNX2_MISC_OTP_CMD1_VSEL (0xfL<<20) +#define BNX2_MISC_OTP_CMD1_TM (0x7L<<27) +#define BNX2_MISC_OTP_CMD1_SADBYP (1L<<30) +#define BNX2_MISC_OTP_CMD1_DEBUG (1L<<31) + +#define BNX2_MISC_OTP_CMD2 0x000008f4 +#define BNX2_MISC_OTP_CMD2_OTP_ROM_ADDR (0x3ffL<<0) +#define BNX2_MISC_OTP_CMD2_DOSEL (0x7fL<<16) +#define BNX2_MISC_OTP_CMD2_DOSEL_0 (0L<<16) +#define BNX2_MISC_OTP_CMD2_DOSEL_1 (1L<<16) +#define BNX2_MISC_OTP_CMD2_DOSEL_127 (127L<<16) + +#define BNX2_MISC_OTP_STATUS 0x000008f8 +#define BNX2_MISC_OTP_STATUS_DATA (0xffL<<0) +#define BNX2_MISC_OTP_STATUS_VALID (1L<<8) +#define BNX2_MISC_OTP_STATUS_BUSY (1L<<9) +#define BNX2_MISC_OTP_STATUS_BUSYSM (1L<<10) +#define BNX2_MISC_OTP_STATUS_DONE (1L<<11) + +#define BNX2_MISC_OTP_SHIFT1_CMD 0x000008fc +#define BNX2_MISC_OTP_SHIFT1_CMD_RESET_MODE_N (1L<<0) +#define BNX2_MISC_OTP_SHIFT1_CMD_SHIFT_DONE (1L<<1) +#define BNX2_MISC_OTP_SHIFT1_CMD_SHIFT_START (1L<<2) +#define BNX2_MISC_OTP_SHIFT1_CMD_LOAD_DATA (1L<<3) +#define BNX2_MISC_OTP_SHIFT1_CMD_SHIFT_SELECT (0x1fL<<8) + +#define BNX2_MISC_OTP_SHIFT1_DATA 0x00000900 +#define BNX2_MISC_OTP_SHIFT2_CMD 0x00000904 +#define BNX2_MISC_OTP_SHIFT2_CMD_RESET_MODE_N (1L<<0) +#define BNX2_MISC_OTP_SHIFT2_CMD_SHIFT_DONE (1L<<1) +#define BNX2_MISC_OTP_SHIFT2_CMD_SHIFT_START (1L<<2) +#define BNX2_MISC_OTP_SHIFT2_CMD_LOAD_DATA (1L<<3) +#define BNX2_MISC_OTP_SHIFT2_CMD_SHIFT_SELECT (0x1fL<<8) + +#define BNX2_MISC_OTP_SHIFT2_DATA 0x00000908 +#define BNX2_MISC_BIST_CS0 0x0000090c +#define BNX2_MISC_BIST_CS0_MBIST_EN (1L<<0) +#define BNX2_MISC_BIST_CS0_BIST_SETUP (0x3L<<1) +#define BNX2_MISC_BIST_CS0_MBIST_ASYNC_RESET (1L<<3) +#define BNX2_MISC_BIST_CS0_MBIST_DONE (1L<<8) +#define BNX2_MISC_BIST_CS0_MBIST_GO (1L<<9) +#define BNX2_MISC_BIST_CS0_BIST_OVERRIDE (1L<<31) + +#define BNX2_MISC_BIST_MEMSTATUS0 0x00000910 +#define BNX2_MISC_BIST_CS1 0x00000914 +#define BNX2_MISC_BIST_CS1_MBIST_EN (1L<<0) +#define BNX2_MISC_BIST_CS1_BIST_SETUP (0x3L<<1) +#define BNX2_MISC_BIST_CS1_MBIST_ASYNC_RESET (1L<<3) +#define BNX2_MISC_BIST_CS1_MBIST_DONE (1L<<8) +#define BNX2_MISC_BIST_CS1_MBIST_GO (1L<<9) + +#define BNX2_MISC_BIST_MEMSTATUS1 0x00000918 +#define BNX2_MISC_BIST_CS2 0x0000091c +#define BNX2_MISC_BIST_CS2_MBIST_EN (1L<<0) +#define BNX2_MISC_BIST_CS2_BIST_SETUP (0x3L<<1) +#define BNX2_MISC_BIST_CS2_MBIST_ASYNC_RESET (1L<<3) +#define BNX2_MISC_BIST_CS2_MBIST_DONE (1L<<8) +#define BNX2_MISC_BIST_CS2_MBIST_GO (1L<<9) + +#define BNX2_MISC_BIST_MEMSTATUS2 0x00000920 +#define BNX2_MISC_BIST_CS3 0x00000924 +#define BNX2_MISC_BIST_CS3_MBIST_EN (1L<<0) +#define BNX2_MISC_BIST_CS3_BIST_SETUP (0x3L<<1) +#define BNX2_MISC_BIST_CS3_MBIST_ASYNC_RESET (1L<<3) +#define BNX2_MISC_BIST_CS3_MBIST_DONE (1L<<8) +#define BNX2_MISC_BIST_CS3_MBIST_GO (1L<<9) + +#define BNX2_MISC_BIST_MEMSTATUS3 0x00000928 +#define BNX2_MISC_BIST_CS4 0x0000092c +#define BNX2_MISC_BIST_CS4_MBIST_EN (1L<<0) +#define BNX2_MISC_BIST_CS4_BIST_SETUP (0x3L<<1) +#define BNX2_MISC_BIST_CS4_MBIST_ASYNC_RESET (1L<<3) +#define BNX2_MISC_BIST_CS4_MBIST_DONE (1L<<8) +#define BNX2_MISC_BIST_CS4_MBIST_GO (1L<<9) + +#define BNX2_MISC_BIST_MEMSTATUS4 0x00000930 +#define BNX2_MISC_BIST_CS5 0x00000934 +#define BNX2_MISC_BIST_CS5_MBIST_EN (1L<<0) +#define BNX2_MISC_BIST_CS5_BIST_SETUP (0x3L<<1) +#define BNX2_MISC_BIST_CS5_MBIST_ASYNC_RESET (1L<<3) +#define BNX2_MISC_BIST_CS5_MBIST_DONE (1L<<8) +#define BNX2_MISC_BIST_CS5_MBIST_GO (1L<<9) + +#define BNX2_MISC_BIST_MEMSTATUS5 0x00000938 +#define BNX2_MISC_MEM_TM0 0x0000093c +#define BNX2_MISC_MEM_TM0_PCIE_REPLAY_TM (0xfL<<0) +#define BNX2_MISC_MEM_TM0_MCP_SCPAD (0xfL<<8) +#define BNX2_MISC_MEM_TM0_UMP_TM (0xffL<<16) +#define BNX2_MISC_MEM_TM0_HB_MEM_TM (0xfL<<24) + +#define BNX2_MISC_USPLL_CTRL 0x00000940 +#define BNX2_MISC_USPLL_CTRL_PH_DET_DIS (1L<<0) +#define BNX2_MISC_USPLL_CTRL_FREQ_DET_DIS (1L<<1) +#define BNX2_MISC_USPLL_CTRL_LCPX (0x3fL<<2) +#define BNX2_MISC_USPLL_CTRL_RX (0x3L<<8) +#define BNX2_MISC_USPLL_CTRL_VC_EN (1L<<10) +#define BNX2_MISC_USPLL_CTRL_VCO_MG (0x3L<<11) +#define BNX2_MISC_USPLL_CTRL_KVCO_XF (0x7L<<13) +#define BNX2_MISC_USPLL_CTRL_KVCO_XS (0x7L<<16) +#define BNX2_MISC_USPLL_CTRL_TESTD_EN (1L<<19) +#define BNX2_MISC_USPLL_CTRL_TESTD_SEL (0x7L<<20) +#define BNX2_MISC_USPLL_CTRL_TESTA_EN (1L<<23) +#define BNX2_MISC_USPLL_CTRL_TESTA_SEL (0x3L<<24) +#define BNX2_MISC_USPLL_CTRL_ATTEN_FREF (1L<<26) +#define BNX2_MISC_USPLL_CTRL_DIGITAL_RST (1L<<27) +#define BNX2_MISC_USPLL_CTRL_ANALOG_RST (1L<<28) +#define BNX2_MISC_USPLL_CTRL_LOCK (1L<<29) + +#define BNX2_MISC_PERR_STATUS0 0x00000944 +#define BNX2_MISC_PERR_STATUS0_COM_DMAE_PERR (1L<<0) +#define BNX2_MISC_PERR_STATUS0_CP_DMAE_PERR (1L<<1) +#define BNX2_MISC_PERR_STATUS0_RPM_ACPIBEMEM_PERR (1L<<2) +#define BNX2_MISC_PERR_STATUS0_CTX_USAGE_CNT_PERR (1L<<3) +#define BNX2_MISC_PERR_STATUS0_CTX_PGTBL_PERR (1L<<4) +#define BNX2_MISC_PERR_STATUS0_CTX_CACHE_PERR (1L<<5) +#define BNX2_MISC_PERR_STATUS0_CTX_MIRROR_PERR (1L<<6) +#define BNX2_MISC_PERR_STATUS0_COM_CTXC_PERR (1L<<7) +#define BNX2_MISC_PERR_STATUS0_COM_SCPAD_PERR (1L<<8) +#define BNX2_MISC_PERR_STATUS0_CP_CTXC_PERR (1L<<9) +#define BNX2_MISC_PERR_STATUS0_CP_SCPAD_PERR (1L<<10) +#define BNX2_MISC_PERR_STATUS0_RXP_RBUFC_PERR (1L<<11) +#define BNX2_MISC_PERR_STATUS0_RXP_CTXC_PERR (1L<<12) +#define BNX2_MISC_PERR_STATUS0_RXP_SCPAD_PERR (1L<<13) +#define BNX2_MISC_PERR_STATUS0_TPAT_SCPAD_PERR (1L<<14) +#define BNX2_MISC_PERR_STATUS0_TXP_CTXC_PERR (1L<<15) +#define BNX2_MISC_PERR_STATUS0_TXP_SCPAD_PERR (1L<<16) +#define BNX2_MISC_PERR_STATUS0_CS_TMEM_PERR (1L<<17) +#define BNX2_MISC_PERR_STATUS0_MQ_CTX_PERR (1L<<18) +#define BNX2_MISC_PERR_STATUS0_RPM_DFIFOMEM_PERR (1L<<19) +#define BNX2_MISC_PERR_STATUS0_RPC_DFIFOMEM_PERR (1L<<20) +#define BNX2_MISC_PERR_STATUS0_RBUF_PTRMEM_PERR (1L<<21) +#define BNX2_MISC_PERR_STATUS0_RBUF_DATAMEM_PERR (1L<<22) +#define BNX2_MISC_PERR_STATUS0_RV2P_P2IRAM_PERR (1L<<23) +#define BNX2_MISC_PERR_STATUS0_RV2P_P1IRAM_PERR (1L<<24) +#define BNX2_MISC_PERR_STATUS0_RV2P_CB1REGS_PERR (1L<<25) +#define BNX2_MISC_PERR_STATUS0_RV2P_CB0REGS_PERR (1L<<26) +#define BNX2_MISC_PERR_STATUS0_TPBUF_PERR (1L<<27) +#define BNX2_MISC_PERR_STATUS0_THBUF_PERR (1L<<28) +#define BNX2_MISC_PERR_STATUS0_TDMA_PERR (1L<<29) +#define BNX2_MISC_PERR_STATUS0_TBDC_PERR (1L<<30) +#define BNX2_MISC_PERR_STATUS0_TSCH_LR_PERR (1L<<31) + +#define BNX2_MISC_PERR_STATUS1 0x00000948 +#define BNX2_MISC_PERR_STATUS1_RBDC_PERR (1L<<0) +#define BNX2_MISC_PERR_STATUS1_RDMA_DFIFO_PERR (1L<<2) +#define BNX2_MISC_PERR_STATUS1_HC_STATS_PERR (1L<<3) +#define BNX2_MISC_PERR_STATUS1_HC_MSIX_PERR (1L<<4) +#define BNX2_MISC_PERR_STATUS1_HC_PRODUCSTB_PERR (1L<<5) +#define BNX2_MISC_PERR_STATUS1_HC_CONSUMSTB_PERR (1L<<6) +#define BNX2_MISC_PERR_STATUS1_TPATQ_PERR (1L<<7) +#define BNX2_MISC_PERR_STATUS1_MCPQ_PERR (1L<<8) +#define BNX2_MISC_PERR_STATUS1_TDMAQ_PERR (1L<<9) +#define BNX2_MISC_PERR_STATUS1_TXPQ_PERR (1L<<10) +#define BNX2_MISC_PERR_STATUS1_COMTQ_PERR (1L<<11) +#define BNX2_MISC_PERR_STATUS1_COMQ_PERR (1L<<12) +#define BNX2_MISC_PERR_STATUS1_RLUPQ_PERR (1L<<13) +#define BNX2_MISC_PERR_STATUS1_RXPQ_PERR (1L<<14) +#define BNX2_MISC_PERR_STATUS1_RV2PPQ_PERR (1L<<15) +#define BNX2_MISC_PERR_STATUS1_RDMAQ_PERR (1L<<16) +#define BNX2_MISC_PERR_STATUS1_TASQ_PERR (1L<<17) +#define BNX2_MISC_PERR_STATUS1_TBDRQ_PERR (1L<<18) +#define BNX2_MISC_PERR_STATUS1_TSCHQ_PERR (1L<<19) +#define BNX2_MISC_PERR_STATUS1_COMXQ_PERR (1L<<20) +#define BNX2_MISC_PERR_STATUS1_RXPCQ_PERR (1L<<21) +#define BNX2_MISC_PERR_STATUS1_RV2PTQ_PERR (1L<<22) +#define BNX2_MISC_PERR_STATUS1_RV2PMQ_PERR (1L<<23) +#define BNX2_MISC_PERR_STATUS1_CPQ_PERR (1L<<24) +#define BNX2_MISC_PERR_STATUS1_CSQ_PERR (1L<<25) +#define BNX2_MISC_PERR_STATUS1_RLUP_CID_PERR (1L<<26) +#define BNX2_MISC_PERR_STATUS1_RV2PCS_TMEM_PERR (1L<<27) +#define BNX2_MISC_PERR_STATUS1_RV2PCSQ_PERR (1L<<28) +#define BNX2_MISC_PERR_STATUS1_MQ_IDX_PERR (1L<<29) + +#define BNX2_MISC_PERR_STATUS2 0x0000094c +#define BNX2_MISC_PERR_STATUS2_TGT_FIFO_PERR (1L<<0) +#define BNX2_MISC_PERR_STATUS2_UMP_TX_PERR (1L<<1) +#define BNX2_MISC_PERR_STATUS2_UMP_RX_PERR (1L<<2) +#define BNX2_MISC_PERR_STATUS2_MCP_ROM_PERR (1L<<3) +#define BNX2_MISC_PERR_STATUS2_MCP_SCPAD_PERR (1L<<4) +#define BNX2_MISC_PERR_STATUS2_HB_MEM_PERR (1L<<5) +#define BNX2_MISC_PERR_STATUS2_PCIE_REPLAY_PERR (1L<<6) + +#define BNX2_MISC_LCPLL_CTRL0 0x00000950 +#define BNX2_MISC_LCPLL_CTRL0_OAC (0x7L<<0) +#define BNX2_MISC_LCPLL_CTRL0_OAC_NEGTWENTY (0L<<0) +#define BNX2_MISC_LCPLL_CTRL0_OAC_ZERO (1L<<0) +#define BNX2_MISC_LCPLL_CTRL0_OAC_TWENTY (3L<<0) +#define BNX2_MISC_LCPLL_CTRL0_OAC_FORTY (7L<<0) +#define BNX2_MISC_LCPLL_CTRL0_ICP_CTRL (0x7L<<3) +#define BNX2_MISC_LCPLL_CTRL0_ICP_CTRL_360 (0L<<3) +#define BNX2_MISC_LCPLL_CTRL0_ICP_CTRL_480 (1L<<3) +#define BNX2_MISC_LCPLL_CTRL0_ICP_CTRL_600 (3L<<3) +#define BNX2_MISC_LCPLL_CTRL0_ICP_CTRL_720 (7L<<3) +#define BNX2_MISC_LCPLL_CTRL0_BIAS_CTRL (0x3L<<6) +#define BNX2_MISC_LCPLL_CTRL0_PLL_OBSERVE (0x7L<<8) +#define BNX2_MISC_LCPLL_CTRL0_VTH_CTRL (0x3L<<11) +#define BNX2_MISC_LCPLL_CTRL0_VTH_CTRL_0 (0L<<11) +#define BNX2_MISC_LCPLL_CTRL0_VTH_CTRL_1 (1L<<11) +#define BNX2_MISC_LCPLL_CTRL0_VTH_CTRL_2 (2L<<11) +#define BNX2_MISC_LCPLL_CTRL0_PLLSEQSTART (1L<<13) +#define BNX2_MISC_LCPLL_CTRL0_RESERVED (1L<<14) +#define BNX2_MISC_LCPLL_CTRL0_CAPRETRY_EN (1L<<15) +#define BNX2_MISC_LCPLL_CTRL0_FREQMONITOR_EN (1L<<16) +#define BNX2_MISC_LCPLL_CTRL0_FREQDETRESTART_EN (1L<<17) +#define BNX2_MISC_LCPLL_CTRL0_FREQDETRETRY_EN (1L<<18) +#define BNX2_MISC_LCPLL_CTRL0_PLLFORCEFDONE_EN (1L<<19) +#define BNX2_MISC_LCPLL_CTRL0_PLLFORCEFDONE (1L<<20) +#define BNX2_MISC_LCPLL_CTRL0_PLLFORCEFPASS (1L<<21) +#define BNX2_MISC_LCPLL_CTRL0_PLLFORCECAPDONE_EN (1L<<22) +#define BNX2_MISC_LCPLL_CTRL0_PLLFORCECAPDONE (1L<<23) +#define BNX2_MISC_LCPLL_CTRL0_PLLFORCECAPPASS_EN (1L<<24) +#define BNX2_MISC_LCPLL_CTRL0_PLLFORCECAPPASS (1L<<25) +#define BNX2_MISC_LCPLL_CTRL0_CAPRESTART (1L<<26) +#define BNX2_MISC_LCPLL_CTRL0_CAPSELECTM_EN (1L<<27) + +#define BNX2_MISC_LCPLL_CTRL1 0x00000954 +#define BNX2_MISC_LCPLL_CTRL1_CAPSELECTM (0x1fL<<0) +#define BNX2_MISC_LCPLL_CTRL1_CAPFORCESLOWDOWN_EN (1L<<5) +#define BNX2_MISC_LCPLL_CTRL1_CAPFORCESLOWDOWN (1L<<6) +#define BNX2_MISC_LCPLL_CTRL1_SLOWDN_XOR (1L<<7) + +#define BNX2_MISC_LCPLL_STATUS 0x00000958 +#define BNX2_MISC_LCPLL_STATUS_FREQDONE_SM (1L<<0) +#define BNX2_MISC_LCPLL_STATUS_FREQPASS_SM (1L<<1) +#define BNX2_MISC_LCPLL_STATUS_PLLSEQDONE (1L<<2) +#define BNX2_MISC_LCPLL_STATUS_PLLSEQPASS (1L<<3) +#define BNX2_MISC_LCPLL_STATUS_PLLSTATE (0x7L<<4) +#define BNX2_MISC_LCPLL_STATUS_CAPSTATE (0x7L<<7) +#define BNX2_MISC_LCPLL_STATUS_CAPSELECT (0x1fL<<10) +#define BNX2_MISC_LCPLL_STATUS_SLOWDN_INDICATOR (1L<<15) +#define BNX2_MISC_LCPLL_STATUS_SLOWDN_INDICATOR_0 (0L<<15) +#define BNX2_MISC_LCPLL_STATUS_SLOWDN_INDICATOR_1 (1L<<15) + +#define BNX2_MISC_OSCFUNDS_CTRL 0x0000095c +#define BNX2_MISC_OSCFUNDS_CTRL_FREQ_MON (1L<<5) +#define BNX2_MISC_OSCFUNDS_CTRL_FREQ_MON_OFF (0L<<5) +#define BNX2_MISC_OSCFUNDS_CTRL_FREQ_MON_ON (1L<<5) +#define BNX2_MISC_OSCFUNDS_CTRL_XTAL_ADJCM (0x3L<<6) +#define BNX2_MISC_OSCFUNDS_CTRL_XTAL_ADJCM_0 (0L<<6) +#define BNX2_MISC_OSCFUNDS_CTRL_XTAL_ADJCM_1 (1L<<6) +#define BNX2_MISC_OSCFUNDS_CTRL_XTAL_ADJCM_2 (2L<<6) +#define BNX2_MISC_OSCFUNDS_CTRL_XTAL_ADJCM_3 (3L<<6) +#define BNX2_MISC_OSCFUNDS_CTRL_ICBUF_ADJ (0x3L<<8) +#define BNX2_MISC_OSCFUNDS_CTRL_ICBUF_ADJ_0 (0L<<8) +#define BNX2_MISC_OSCFUNDS_CTRL_ICBUF_ADJ_1 (1L<<8) +#define BNX2_MISC_OSCFUNDS_CTRL_ICBUF_ADJ_2 (2L<<8) +#define BNX2_MISC_OSCFUNDS_CTRL_ICBUF_ADJ_3 (3L<<8) +#define BNX2_MISC_OSCFUNDS_CTRL_IAMP_ADJ (0x3L<<10) +#define BNX2_MISC_OSCFUNDS_CTRL_IAMP_ADJ_0 (0L<<10) +#define BNX2_MISC_OSCFUNDS_CTRL_IAMP_ADJ_1 (1L<<10) +#define BNX2_MISC_OSCFUNDS_CTRL_IAMP_ADJ_2 (2L<<10) +#define BNX2_MISC_OSCFUNDS_CTRL_IAMP_ADJ_3 (3L<<10) /* @@ -1031,11 +1736,35 @@ struct l2_fhdr { #define BNX2_NVM_COMMAND_WRDI (1L<<17) #define BNX2_NVM_COMMAND_EWSR (1L<<18) #define BNX2_NVM_COMMAND_WRSR (1L<<19) +#define BNX2_NVM_COMMAND_RD_ID (1L<<20) +#define BNX2_NVM_COMMAND_RD_STATUS (1L<<21) +#define BNX2_NVM_COMMAND_MODE_256 (1L<<22) #define BNX2_NVM_STATUS 0x00006404 #define BNX2_NVM_STATUS_PI_FSM_STATE (0xfL<<0) #define BNX2_NVM_STATUS_EE_FSM_STATE (0xfL<<4) #define BNX2_NVM_STATUS_EQ_FSM_STATE (0xfL<<8) +#define BNX2_NVM_STATUS_SPI_FSM_STATE_XI (0x1fL<<0) +#define BNX2_NVM_STATUS_SPI_FSM_STATE_SPI_IDLE_XI (0L<<0) +#define BNX2_NVM_STATUS_SPI_FSM_STATE_SPI_CMD0_XI (1L<<0) +#define BNX2_NVM_STATUS_SPI_FSM_STATE_SPI_CMD1_XI (2L<<0) +#define BNX2_NVM_STATUS_SPI_FSM_STATE_SPI_CMD_FINISH0_XI (3L<<0) +#define BNX2_NVM_STATUS_SPI_FSM_STATE_SPI_CMD_FINISH1_XI (4L<<0) +#define BNX2_NVM_STATUS_SPI_FSM_STATE_SPI_ADDR0_XI (5L<<0) +#define BNX2_NVM_STATUS_SPI_FSM_STATE_SPI_WRITE_DATA0_XI (6L<<0) +#define BNX2_NVM_STATUS_SPI_FSM_STATE_SPI_WRITE_DATA1_XI (7L<<0) +#define BNX2_NVM_STATUS_SPI_FSM_STATE_SPI_WRITE_DATA2_XI (8L<<0) +#define BNX2_NVM_STATUS_SPI_FSM_STATE_SPI_READ_DATA0_XI (9L<<0) +#define BNX2_NVM_STATUS_SPI_FSM_STATE_SPI_READ_DATA1_XI (10L<<0) +#define BNX2_NVM_STATUS_SPI_FSM_STATE_SPI_READ_DATA2_XI (11L<<0) +#define BNX2_NVM_STATUS_SPI_FSM_STATE_SPI_READ_STATUS_RDID0_XI (12L<<0) +#define BNX2_NVM_STATUS_SPI_FSM_STATE_SPI_READ_STATUS_RDID1_XI (13L<<0) +#define BNX2_NVM_STATUS_SPI_FSM_STATE_SPI_READ_STATUS_RDID2_XI (14L<<0) +#define BNX2_NVM_STATUS_SPI_FSM_STATE_SPI_READ_STATUS_RDID3_XI (15L<<0) +#define BNX2_NVM_STATUS_SPI_FSM_STATE_SPI_READ_STATUS_RDID4_XI (16L<<0) +#define BNX2_NVM_STATUS_SPI_FSM_STATE_SPI_CHECK_BUSY0_XI (17L<<0) +#define BNX2_NVM_STATUS_SPI_FSM_STATE_SPI_ST_WREN_XI (18L<<0) +#define BNX2_NVM_STATUS_SPI_FSM_STATE_SPI_WAIT_XI (19L<<0) #define BNX2_NVM_WRITE 0x00006408 #define BNX2_NVM_WRITE_NVM_WRITE_VALUE (0xffffffffL<<0) @@ -1046,6 +1775,10 @@ struct l2_fhdr { #define BNX2_NVM_WRITE_NVM_WRITE_VALUE_CS_B (8L<<0) #define BNX2_NVM_WRITE_NVM_WRITE_VALUE_SO (16L<<0) #define BNX2_NVM_WRITE_NVM_WRITE_VALUE_SI (32L<<0) +#define BNX2_NVM_WRITE_NVM_WRITE_VALUE_SI_XI (1L<<0) +#define BNX2_NVM_WRITE_NVM_WRITE_VALUE_SO_XI (2L<<0) +#define BNX2_NVM_WRITE_NVM_WRITE_VALUE_CS_B_XI (4L<<0) +#define BNX2_NVM_WRITE_NVM_WRITE_VALUE_SCLK_XI (8L<<0) #define BNX2_NVM_ADDR 0x0000640c #define BNX2_NVM_ADDR_NVM_ADDR_VALUE (0xffffffL<<0) @@ -1056,6 +1789,10 @@ struct l2_fhdr { #define BNX2_NVM_ADDR_NVM_ADDR_VALUE_CS_B (8L<<0) #define BNX2_NVM_ADDR_NVM_ADDR_VALUE_SO (16L<<0) #define BNX2_NVM_ADDR_NVM_ADDR_VALUE_SI (32L<<0) +#define BNX2_NVM_ADDR_NVM_ADDR_VALUE_SI_XI (1L<<0) +#define BNX2_NVM_ADDR_NVM_ADDR_VALUE_SO_XI (2L<<0) +#define BNX2_NVM_ADDR_NVM_ADDR_VALUE_CS_B_XI (4L<<0) +#define BNX2_NVM_ADDR_NVM_ADDR_VALUE_SCLK_XI (8L<<0) #define BNX2_NVM_READ 0x00006410 #define BNX2_NVM_READ_NVM_READ_VALUE (0xffffffffL<<0) @@ -1066,6 +1803,10 @@ struct l2_fhdr { #define BNX2_NVM_READ_NVM_READ_VALUE_CS_B (8L<<0) #define BNX2_NVM_READ_NVM_READ_VALUE_SO (16L<<0) #define BNX2_NVM_READ_NVM_READ_VALUE_SI (32L<<0) +#define BNX2_NVM_READ_NVM_READ_VALUE_SI_XI (1L<<0) +#define BNX2_NVM_READ_NVM_READ_VALUE_SO_XI (2L<<0) +#define BNX2_NVM_READ_NVM_READ_VALUE_CS_B_XI (4L<<0) +#define BNX2_NVM_READ_NVM_READ_VALUE_SCLK_XI (8L<<0) #define BNX2_NVM_CFG1 0x00006414 #define BNX2_NVM_CFG1_FLASH_MODE (1L<<0) @@ -1077,14 +1818,21 @@ struct l2_fhdr { #define BNX2_NVM_CFG1_STATUS_BIT_BUFFER_RDY (7L<<4) #define BNX2_NVM_CFG1_SPI_CLK_DIV (0xfL<<7) #define BNX2_NVM_CFG1_SEE_CLK_DIV (0x7ffL<<11) +#define BNX2_NVM_CFG1_STRAP_CONTROL_0 (1L<<23) #define BNX2_NVM_CFG1_PROTECT_MODE (1L<<24) #define BNX2_NVM_CFG1_FLASH_SIZE (1L<<25) +#define BNX2_NVM_CFG1_FW_USTRAP_1 (1L<<26) +#define BNX2_NVM_CFG1_FW_USTRAP_0 (1L<<27) +#define BNX2_NVM_CFG1_FW_USTRAP_2 (1L<<28) +#define BNX2_NVM_CFG1_FW_USTRAP_3 (1L<<29) +#define BNX2_NVM_CFG1_FW_FLASH_TYPE_EN (1L<<30) #define BNX2_NVM_CFG1_COMPAT_BYPASSS (1L<<31) #define BNX2_NVM_CFG2 0x00006418 #define BNX2_NVM_CFG2_ERASE_CMD (0xffL<<0) #define BNX2_NVM_CFG2_DUMMY (0xffL<<8) #define BNX2_NVM_CFG2_STATUS_CMD (0xffL<<16) +#define BNX2_NVM_CFG2_READ_ID (0xffL<<24) #define BNX2_NVM_CFG3 0x0000641c #define BNX2_NVM_CFG3_BUFFER_RD_CMD (0xffL<<0) @@ -1119,6 +1867,35 @@ struct l2_fhdr { #define BNX2_NVM_WRITE1_WRDI_CMD (0xffL<<8) #define BNX2_NVM_WRITE1_SR_DATA (0xffL<<16) +#define BNX2_NVM_CFG4 0x0000642c +#define BNX2_NVM_CFG4_FLASH_SIZE (0x7L<<0) +#define BNX2_NVM_CFG4_FLASH_SIZE_1MBIT (0L<<0) +#define BNX2_NVM_CFG4_FLASH_SIZE_2MBIT (1L<<0) +#define BNX2_NVM_CFG4_FLASH_SIZE_4MBIT (2L<<0) +#define BNX2_NVM_CFG4_FLASH_SIZE_8MBIT (3L<<0) +#define BNX2_NVM_CFG4_FLASH_SIZE_16MBIT (4L<<0) +#define BNX2_NVM_CFG4_FLASH_SIZE_32MBIT (5L<<0) +#define BNX2_NVM_CFG4_FLASH_SIZE_64MBIT (6L<<0) +#define BNX2_NVM_CFG4_FLASH_SIZE_128MBIT (7L<<0) +#define BNX2_NVM_CFG4_FLASH_VENDOR (1L<<3) +#define BNX2_NVM_CFG4_FLASH_VENDOR_ST (0L<<3) +#define BNX2_NVM_CFG4_FLASH_VENDOR_ATMEL (1L<<3) +#define BNX2_NVM_CFG4_MODE_256_EMPTY_BIT_LOC (0x3L<<4) +#define BNX2_NVM_CFG4_MODE_256_EMPTY_BIT_LOC_BIT8 (0L<<4) +#define BNX2_NVM_CFG4_MODE_256_EMPTY_BIT_LOC_BIT9 (1L<<4) +#define BNX2_NVM_CFG4_MODE_256_EMPTY_BIT_LOC_BIT10 (2L<<4) +#define BNX2_NVM_CFG4_MODE_256_EMPTY_BIT_LOC_BIT11 (3L<<4) +#define BNX2_NVM_CFG4_STATUS_BIT_POLARITY (1L<<6) +#define BNX2_NVM_CFG4_RESERVED (0x1ffffffL<<7) + +#define BNX2_NVM_RECONFIG 0x00006430 +#define BNX2_NVM_RECONFIG_ORIG_STRAP_VALUE (0xfL<<0) +#define BNX2_NVM_RECONFIG_ORIG_STRAP_VALUE_ST (0L<<0) +#define BNX2_NVM_RECONFIG_ORIG_STRAP_VALUE_ATMEL (1L<<0) +#define BNX2_NVM_RECONFIG_RECONFIG_STRAP_VALUE (0xfL<<4) +#define BNX2_NVM_RECONFIG_RESERVED (0x7fffffL<<8) +#define BNX2_NVM_RECONFIG_RECONFIG_DONE (1L<<31) + /* @@ -1140,6 +1917,8 @@ struct l2_fhdr { #define BNX2_DMA_STATUS_BIG_WRITE_TRANSFERS_STAT (1L<<23) #define BNX2_DMA_STATUS_BIG_WRITE_DELAY_PCI_CLKS_STAT (1L<<24) #define BNX2_DMA_STATUS_BIG_WRITE_RETRY_AFTER_DATA_STAT (1L<<25) +#define BNX2_DMA_STATUS_GLOBAL_ERR_XI (1L<<0) +#define BNX2_DMA_STATUS_BME_XI (1L<<4) #define BNX2_DMA_CONFIG 0x00000c08 #define BNX2_DMA_CONFIG_DATA_BYTE_SWAP (1L<<0) @@ -1161,85 +1940,315 @@ struct l2_fhdr { #define BNX2_DMA_CONFIG_BIG_SIZE_128 (0x2L<<24) #define BNX2_DMA_CONFIG_BIG_SIZE_256 (0x4L<<24) #define BNX2_DMA_CONFIG_BIG_SIZE_512 (0x8L<<24) +#define BNX2_DMA_CONFIG_DAT_WBSWAP_MODE_XI (0x3L<<0) +#define BNX2_DMA_CONFIG_CTL_WBSWAP_MODE_XI (0x3L<<4) +#define BNX2_DMA_CONFIG_MAX_PL_XI (0x7L<<12) +#define BNX2_DMA_CONFIG_MAX_PL_128B_XI (0L<<12) +#define BNX2_DMA_CONFIG_MAX_PL_256B_XI (1L<<12) +#define BNX2_DMA_CONFIG_MAX_PL_512B_XI (2L<<12) +#define BNX2_DMA_CONFIG_MAX_PL_EN_XI (1L<<15) +#define BNX2_DMA_CONFIG_MAX_RRS_XI (0x7L<<16) +#define BNX2_DMA_CONFIG_MAX_RRS_128B_XI (0L<<16) +#define BNX2_DMA_CONFIG_MAX_RRS_256B_XI (1L<<16) +#define BNX2_DMA_CONFIG_MAX_RRS_512B_XI (2L<<16) +#define BNX2_DMA_CONFIG_MAX_RRS_1024B_XI (3L<<16) +#define BNX2_DMA_CONFIG_MAX_RRS_2048B_XI (4L<<16) +#define BNX2_DMA_CONFIG_MAX_RRS_4096B_XI (5L<<16) +#define BNX2_DMA_CONFIG_MAX_RRS_EN_XI (1L<<19) +#define BNX2_DMA_CONFIG_NO_64SWAP_EN_XI (1L<<31) #define BNX2_DMA_BLACKOUT 0x00000c0c #define BNX2_DMA_BLACKOUT_RD_RETRY_BLACKOUT (0xffL<<0) #define BNX2_DMA_BLACKOUT_2ND_RD_RETRY_BLACKOUT (0xffL<<8) #define BNX2_DMA_BLACKOUT_WR_RETRY_BLACKOUT (0xffL<<16) -#define BNX2_DMA_RCHAN_STAT 0x00000c30 -#define BNX2_DMA_RCHAN_STAT_COMP_CODE_0 (0x7L<<0) -#define BNX2_DMA_RCHAN_STAT_PAR_ERR_0 (1L<<3) -#define BNX2_DMA_RCHAN_STAT_COMP_CODE_1 (0x7L<<4) -#define BNX2_DMA_RCHAN_STAT_PAR_ERR_1 (1L<<7) -#define BNX2_DMA_RCHAN_STAT_COMP_CODE_2 (0x7L<<8) -#define BNX2_DMA_RCHAN_STAT_PAR_ERR_2 (1L<<11) -#define BNX2_DMA_RCHAN_STAT_COMP_CODE_3 (0x7L<<12) -#define BNX2_DMA_RCHAN_STAT_PAR_ERR_3 (1L<<15) -#define BNX2_DMA_RCHAN_STAT_COMP_CODE_4 (0x7L<<16) -#define BNX2_DMA_RCHAN_STAT_PAR_ERR_4 (1L<<19) -#define BNX2_DMA_RCHAN_STAT_COMP_CODE_5 (0x7L<<20) -#define BNX2_DMA_RCHAN_STAT_PAR_ERR_5 (1L<<23) -#define BNX2_DMA_RCHAN_STAT_COMP_CODE_6 (0x7L<<24) -#define BNX2_DMA_RCHAN_STAT_PAR_ERR_6 (1L<<27) -#define BNX2_DMA_RCHAN_STAT_COMP_CODE_7 (0x7L<<28) -#define BNX2_DMA_RCHAN_STAT_PAR_ERR_7 (1L<<31) - -#define BNX2_DMA_WCHAN_STAT 0x00000c34 -#define BNX2_DMA_WCHAN_STAT_COMP_CODE_0 (0x7L<<0) -#define BNX2_DMA_WCHAN_STAT_PAR_ERR_0 (1L<<3) -#define BNX2_DMA_WCHAN_STAT_COMP_CODE_1 (0x7L<<4) -#define BNX2_DMA_WCHAN_STAT_PAR_ERR_1 (1L<<7) -#define BNX2_DMA_WCHAN_STAT_COMP_CODE_2 (0x7L<<8) -#define BNX2_DMA_WCHAN_STAT_PAR_ERR_2 (1L<<11) -#define BNX2_DMA_WCHAN_STAT_COMP_CODE_3 (0x7L<<12) -#define BNX2_DMA_WCHAN_STAT_PAR_ERR_3 (1L<<15) -#define BNX2_DMA_WCHAN_STAT_COMP_CODE_4 (0x7L<<16) -#define BNX2_DMA_WCHAN_STAT_PAR_ERR_4 (1L<<19) -#define BNX2_DMA_WCHAN_STAT_COMP_CODE_5 (0x7L<<20) -#define BNX2_DMA_WCHAN_STAT_PAR_ERR_5 (1L<<23) -#define BNX2_DMA_WCHAN_STAT_COMP_CODE_6 (0x7L<<24) -#define BNX2_DMA_WCHAN_STAT_PAR_ERR_6 (1L<<27) -#define BNX2_DMA_WCHAN_STAT_COMP_CODE_7 (0x7L<<28) -#define BNX2_DMA_WCHAN_STAT_PAR_ERR_7 (1L<<31) - -#define BNX2_DMA_RCHAN_ASSIGNMENT 0x00000c38 -#define BNX2_DMA_RCHAN_ASSIGNMENT_0 (0xfL<<0) -#define BNX2_DMA_RCHAN_ASSIGNMENT_1 (0xfL<<4) -#define BNX2_DMA_RCHAN_ASSIGNMENT_2 (0xfL<<8) -#define BNX2_DMA_RCHAN_ASSIGNMENT_3 (0xfL<<12) -#define BNX2_DMA_RCHAN_ASSIGNMENT_4 (0xfL<<16) -#define BNX2_DMA_RCHAN_ASSIGNMENT_5 (0xfL<<20) -#define BNX2_DMA_RCHAN_ASSIGNMENT_6 (0xfL<<24) -#define BNX2_DMA_RCHAN_ASSIGNMENT_7 (0xfL<<28) - -#define BNX2_DMA_WCHAN_ASSIGNMENT 0x00000c3c -#define BNX2_DMA_WCHAN_ASSIGNMENT_0 (0xfL<<0) -#define BNX2_DMA_WCHAN_ASSIGNMENT_1 (0xfL<<4) -#define BNX2_DMA_WCHAN_ASSIGNMENT_2 (0xfL<<8) -#define BNX2_DMA_WCHAN_ASSIGNMENT_3 (0xfL<<12) -#define BNX2_DMA_WCHAN_ASSIGNMENT_4 (0xfL<<16) -#define BNX2_DMA_WCHAN_ASSIGNMENT_5 (0xfL<<20) -#define BNX2_DMA_WCHAN_ASSIGNMENT_6 (0xfL<<24) -#define BNX2_DMA_WCHAN_ASSIGNMENT_7 (0xfL<<28) - -#define BNX2_DMA_RCHAN_STAT_00 0x00000c40 -#define BNX2_DMA_RCHAN_STAT_00_RCHAN_STA_HOST_ADDR_LOW (0xffffffffL<<0) - -#define BNX2_DMA_RCHAN_STAT_01 0x00000c44 -#define BNX2_DMA_RCHAN_STAT_01_RCHAN_STA_HOST_ADDR_HIGH (0xffffffffL<<0) - -#define BNX2_DMA_RCHAN_STAT_02 0x00000c48 -#define BNX2_DMA_RCHAN_STAT_02_LENGTH (0xffffL<<0) -#define BNX2_DMA_RCHAN_STAT_02_WORD_SWAP (1L<<16) -#define BNX2_DMA_RCHAN_STAT_02_BYTE_SWAP (1L<<17) -#define BNX2_DMA_RCHAN_STAT_02_PRIORITY_LVL (1L<<18) - -#define BNX2_DMA_RCHAN_STAT_10 0x00000c4c -#define BNX2_DMA_RCHAN_STAT_11 0x00000c50 -#define BNX2_DMA_RCHAN_STAT_12 0x00000c54 -#define BNX2_DMA_RCHAN_STAT_20 0x00000c58 -#define BNX2_DMA_RCHAN_STAT_21 0x00000c5c +#define BNX2_DMA_READ_MASTER_SETTING_0 0x00000c10 +#define BNX2_DMA_READ_MASTER_SETTING_0_TBDC_NO_SNOOP (1L<<0) +#define BNX2_DMA_READ_MASTER_SETTING_0_TBDC_RELAX_ORDER (1L<<1) +#define BNX2_DMA_READ_MASTER_SETTING_0_TBDC_PRIORITY (1L<<2) +#define BNX2_DMA_READ_MASTER_SETTING_0_TBDC_TRAFFIC_CLASS (0x7L<<4) +#define BNX2_DMA_READ_MASTER_SETTING_0_TBDC_PARAM_EN (1L<<7) +#define BNX2_DMA_READ_MASTER_SETTING_0_RBDC_NO_SNOOP (1L<<8) +#define BNX2_DMA_READ_MASTER_SETTING_0_RBDC_RELAX_ORDER (1L<<9) +#define BNX2_DMA_READ_MASTER_SETTING_0_RBDC_PRIORITY (1L<<10) +#define BNX2_DMA_READ_MASTER_SETTING_0_RBDC_TRAFFIC_CLASS (0x7L<<12) +#define BNX2_DMA_READ_MASTER_SETTING_0_RBDC_PARAM_EN (1L<<15) +#define BNX2_DMA_READ_MASTER_SETTING_0_TDMA_NO_SNOOP (1L<<16) +#define BNX2_DMA_READ_MASTER_SETTING_0_TDMA_RELAX_ORDER (1L<<17) +#define BNX2_DMA_READ_MASTER_SETTING_0_TDMA_PRIORITY (1L<<18) +#define BNX2_DMA_READ_MASTER_SETTING_0_TDMA_TRAFFIC_CLASS (0x7L<<20) +#define BNX2_DMA_READ_MASTER_SETTING_0_TDMA_PARAM_EN (1L<<23) +#define BNX2_DMA_READ_MASTER_SETTING_0_CTX_NO_SNOOP (1L<<24) +#define BNX2_DMA_READ_MASTER_SETTING_0_CTX_RELAX_ORDER (1L<<25) +#define BNX2_DMA_READ_MASTER_SETTING_0_CTX_PRIORITY (1L<<26) +#define BNX2_DMA_READ_MASTER_SETTING_0_CTX_TRAFFIC_CLASS (0x7L<<28) +#define BNX2_DMA_READ_MASTER_SETTING_0_CTX_PARAM_EN (1L<<31) + +#define BNX2_DMA_READ_MASTER_SETTING_1 0x00000c14 +#define BNX2_DMA_READ_MASTER_SETTING_1_COM_NO_SNOOP (1L<<0) +#define BNX2_DMA_READ_MASTER_SETTING_1_COM_RELAX_ORDER (1L<<1) +#define BNX2_DMA_READ_MASTER_SETTING_1_COM_PRIORITY (1L<<2) +#define BNX2_DMA_READ_MASTER_SETTING_1_COM_TRAFFIC_CLASS (0x7L<<4) +#define BNX2_DMA_READ_MASTER_SETTING_1_COM_PARAM_EN (1L<<7) +#define BNX2_DMA_READ_MASTER_SETTING_1_CP_NO_SNOOP (1L<<8) +#define BNX2_DMA_READ_MASTER_SETTING_1_CP_RELAX_ORDER (1L<<9) +#define BNX2_DMA_READ_MASTER_SETTING_1_CP_PRIORITY (1L<<10) +#define BNX2_DMA_READ_MASTER_SETTING_1_CP_TRAFFIC_CLASS (0x7L<<12) +#define BNX2_DMA_READ_MASTER_SETTING_1_CP_PARAM_EN (1L<<15) + +#define BNX2_DMA_WRITE_MASTER_SETTING_0 0x00000c18 +#define BNX2_DMA_WRITE_MASTER_SETTING_0_HC_NO_SNOOP (1L<<0) +#define BNX2_DMA_WRITE_MASTER_SETTING_0_HC_RELAX_ORDER (1L<<1) +#define BNX2_DMA_WRITE_MASTER_SETTING_0_HC_PRIORITY (1L<<2) +#define BNX2_DMA_WRITE_MASTER_SETTING_0_HC_CS_VLD (1L<<3) +#define BNX2_DMA_WRITE_MASTER_SETTING_0_HC_TRAFFIC_CLASS (0x7L<<4) +#define BNX2_DMA_WRITE_MASTER_SETTING_0_HC_PARAM_EN (1L<<7) +#define BNX2_DMA_WRITE_MASTER_SETTING_0_RDMA_NO_SNOOP (1L<<8) +#define BNX2_DMA_WRITE_MASTER_SETTING_0_RDMA_RELAX_ORDER (1L<<9) +#define BNX2_DMA_WRITE_MASTER_SETTING_0_RDMA_PRIORITY (1L<<10) +#define BNX2_DMA_WRITE_MASTER_SETTING_0_RDMA_CS_VLD (1L<<11) +#define BNX2_DMA_WRITE_MASTER_SETTING_0_RDMA_TRAFFIC_CLASS (0x7L<<12) +#define BNX2_DMA_WRITE_MASTER_SETTING_0_RDMA_PARAM_EN (1L<<15) +#define BNX2_DMA_WRITE_MASTER_SETTING_0_CTX_NO_SNOOP (1L<<24) +#define BNX2_DMA_WRITE_MASTER_SETTING_0_CTX_RELAX_ORDER (1L<<25) +#define BNX2_DMA_WRITE_MASTER_SETTING_0_CTX_PRIORITY (1L<<26) +#define BNX2_DMA_WRITE_MASTER_SETTING_0_CTX_CS_VLD (1L<<27) +#define BNX2_DMA_WRITE_MASTER_SETTING_0_CTX_TRAFFIC_CLASS (0x7L<<28) +#define BNX2_DMA_WRITE_MASTER_SETTING_0_CTX_PARAM_EN (1L<<31) + +#define BNX2_DMA_WRITE_MASTER_SETTING_1 0x00000c1c +#define BNX2_DMA_WRITE_MASTER_SETTING_1_COM_NO_SNOOP (1L<<0) +#define BNX2_DMA_WRITE_MASTER_SETTING_1_COM_RELAX_ORDER (1L<<1) +#define BNX2_DMA_WRITE_MASTER_SETTING_1_COM_PRIORITY (1L<<2) +#define BNX2_DMA_WRITE_MASTER_SETTING_1_COM_CS_VLD (1L<<3) +#define BNX2_DMA_WRITE_MASTER_SETTING_1_COM_TRAFFIC_CLASS (0x7L<<4) +#define BNX2_DMA_WRITE_MASTER_SETTING_1_COM_PARAM_EN (1L<<7) +#define BNX2_DMA_WRITE_MASTER_SETTING_1_CP_NO_SNOOP (1L<<8) +#define BNX2_DMA_WRITE_MASTER_SETTING_1_CP_RELAX_ORDER (1L<<9) +#define BNX2_DMA_WRITE_MASTER_SETTING_1_CP_PRIORITY (1L<<10) +#define BNX2_DMA_WRITE_MASTER_SETTING_1_CP_CS_VLD (1L<<11) +#define BNX2_DMA_WRITE_MASTER_SETTING_1_CP_TRAFFIC_CLASS (0x7L<<12) +#define BNX2_DMA_WRITE_MASTER_SETTING_1_CP_PARAM_EN (1L<<15) + +#define BNX2_DMA_ARBITER 0x00000c20 +#define BNX2_DMA_ARBITER_NUM_READS (0x7L<<0) +#define BNX2_DMA_ARBITER_WR_ARB_MODE (1L<<4) +#define BNX2_DMA_ARBITER_WR_ARB_MODE_STRICT (0L<<4) +#define BNX2_DMA_ARBITER_WR_ARB_MODE_RND_RBN (1L<<4) +#define BNX2_DMA_ARBITER_RD_ARB_MODE (0x3L<<5) +#define BNX2_DMA_ARBITER_RD_ARB_MODE_STRICT (0L<<5) +#define BNX2_DMA_ARBITER_RD_ARB_MODE_RND_RBN (1L<<5) +#define BNX2_DMA_ARBITER_RD_ARB_MODE_WGT_RND_RBN (2L<<5) +#define BNX2_DMA_ARBITER_ALT_MODE_EN (1L<<8) +#define BNX2_DMA_ARBITER_RR_MODE (1L<<9) +#define BNX2_DMA_ARBITER_TIMER_MODE (1L<<10) +#define BNX2_DMA_ARBITER_OUSTD_READ_REQ (0xfL<<12) + +#define BNX2_DMA_ARB_TIMERS 0x00000c24 +#define BNX2_DMA_ARB_TIMERS_RD_DRR_WAIT_TIME (0xffL<<0) +#define BNX2_DMA_ARB_TIMERS_TM_MIN_TIMEOUT (0xffL<<12) +#define BNX2_DMA_ARB_TIMERS_TM_MAX_TIMEOUT (0xfffL<<20) + +#define BNX2_DMA_DEBUG_VECT_PEEK 0x00000c2c +#define BNX2_DMA_DEBUG_VECT_PEEK_1_VALUE (0x7ffL<<0) +#define BNX2_DMA_DEBUG_VECT_PEEK_1_PEEK_EN (1L<<11) +#define BNX2_DMA_DEBUG_VECT_PEEK_1_SEL (0xfL<<12) +#define BNX2_DMA_DEBUG_VECT_PEEK_2_VALUE (0x7ffL<<16) +#define BNX2_DMA_DEBUG_VECT_PEEK_2_PEEK_EN (1L<<27) +#define BNX2_DMA_DEBUG_VECT_PEEK_2_SEL (0xfL<<28) + +#define BNX2_DMA_TAG_RAM_00 0x00000c30 +#define BNX2_DMA_TAG_RAM_00_CHANNEL (0xfL<<0) +#define BNX2_DMA_TAG_RAM_00_MASTER (0x7L<<4) +#define BNX2_DMA_TAG_RAM_00_MASTER_CTX (0L<<4) +#define BNX2_DMA_TAG_RAM_00_MASTER_RBDC (1L<<4) +#define BNX2_DMA_TAG_RAM_00_MASTER_TBDC (2L<<4) +#define BNX2_DMA_TAG_RAM_00_MASTER_COM (3L<<4) +#define BNX2_DMA_TAG_RAM_00_MASTER_CP (4L<<4) +#define BNX2_DMA_TAG_RAM_00_MASTER_TDMA (5L<<4) +#define BNX2_DMA_TAG_RAM_00_SWAP (0x3L<<7) +#define BNX2_DMA_TAG_RAM_00_SWAP_CONFIG (0L<<7) +#define BNX2_DMA_TAG_RAM_00_SWAP_DATA (1L<<7) +#define BNX2_DMA_TAG_RAM_00_SWAP_CONTROL (2L<<7) +#define BNX2_DMA_TAG_RAM_00_FUNCTION (1L<<9) +#define BNX2_DMA_TAG_RAM_00_VALID (1L<<10) + +#define BNX2_DMA_TAG_RAM_01 0x00000c34 +#define BNX2_DMA_TAG_RAM_01_CHANNEL (0xfL<<0) +#define BNX2_DMA_TAG_RAM_01_MASTER (0x7L<<4) +#define BNX2_DMA_TAG_RAM_01_MASTER_CTX (0L<<4) +#define BNX2_DMA_TAG_RAM_01_MASTER_RBDC (1L<<4) +#define BNX2_DMA_TAG_RAM_01_MASTER_TBDC (2L<<4) +#define BNX2_DMA_TAG_RAM_01_MASTER_COM (3L<<4) +#define BNX2_DMA_TAG_RAM_01_MASTER_CP (4L<<4) +#define BNX2_DMA_TAG_RAM_01_MASTER_TDMA (5L<<4) +#define BNX2_DMA_TAG_RAM_01_SWAP (0x3L<<7) +#define BNX2_DMA_TAG_RAM_01_SWAP_CONFIG (0L<<7) +#define BNX2_DMA_TAG_RAM_01_SWAP_DATA (1L<<7) +#define BNX2_DMA_TAG_RAM_01_SWAP_CONTROL (2L<<7) +#define BNX2_DMA_TAG_RAM_01_FUNCTION (1L<<9) +#define BNX2_DMA_TAG_RAM_01_VALID (1L<<10) + +#define BNX2_DMA_TAG_RAM_02 0x00000c38 +#define BNX2_DMA_TAG_RAM_02_CHANNEL (0xfL<<0) +#define BNX2_DMA_TAG_RAM_02_MASTER (0x7L<<4) +#define BNX2_DMA_TAG_RAM_02_MASTER_CTX (0L<<4) +#define BNX2_DMA_TAG_RAM_02_MASTER_RBDC (1L<<4) +#define BNX2_DMA_TAG_RAM_02_MASTER_TBDC (2L<<4) +#define BNX2_DMA_TAG_RAM_02_MASTER_COM (3L<<4) +#define BNX2_DMA_TAG_RAM_02_MASTER_CP (4L<<4) +#define BNX2_DMA_TAG_RAM_02_MASTER_TDMA (5L<<4) +#define BNX2_DMA_TAG_RAM_02_SWAP (0x3L<<7) +#define BNX2_DMA_TAG_RAM_02_SWAP_CONFIG (0L<<7) +#define BNX2_DMA_TAG_RAM_02_SWAP_DATA (1L<<7) +#define BNX2_DMA_TAG_RAM_02_SWAP_CONTROL (2L<<7) +#define BNX2_DMA_TAG_RAM_02_FUNCTION (1L<<9) +#define BNX2_DMA_TAG_RAM_02_VALID (1L<<10) + +#define BNX2_DMA_TAG_RAM_03 0x00000c3c +#define BNX2_DMA_TAG_RAM_03_CHANNEL (0xfL<<0) +#define BNX2_DMA_TAG_RAM_03_MASTER (0x7L<<4) +#define BNX2_DMA_TAG_RAM_03_MASTER_CTX (0L<<4) +#define BNX2_DMA_TAG_RAM_03_MASTER_RBDC (1L<<4) +#define BNX2_DMA_TAG_RAM_03_MASTER_TBDC (2L<<4) +#define BNX2_DMA_TAG_RAM_03_MASTER_COM (3L<<4) +#define BNX2_DMA_TAG_RAM_03_MASTER_CP (4L<<4) +#define BNX2_DMA_TAG_RAM_03_MASTER_TDMA (5L<<4) +#define BNX2_DMA_TAG_RAM_03_SWAP (0x3L<<7) +#define BNX2_DMA_TAG_RAM_03_SWAP_CONFIG (0L<<7) +#define BNX2_DMA_TAG_RAM_03_SWAP_DATA (1L<<7) +#define BNX2_DMA_TAG_RAM_03_SWAP_CONTROL (2L<<7) +#define BNX2_DMA_TAG_RAM_03_FUNCTION (1L<<9) +#define BNX2_DMA_TAG_RAM_03_VALID (1L<<10) + +#define BNX2_DMA_TAG_RAM_04 0x00000c40 +#define BNX2_DMA_TAG_RAM_04_CHANNEL (0xfL<<0) +#define BNX2_DMA_TAG_RAM_04_MASTER (0x7L<<4) +#define BNX2_DMA_TAG_RAM_04_MASTER_CTX (0L<<4) +#define BNX2_DMA_TAG_RAM_04_MASTER_RBDC (1L<<4) +#define BNX2_DMA_TAG_RAM_04_MASTER_TBDC (2L<<4) +#define BNX2_DMA_TAG_RAM_04_MASTER_COM (3L<<4) +#define BNX2_DMA_TAG_RAM_04_MASTER_CP (4L<<4) +#define BNX2_DMA_TAG_RAM_04_MASTER_TDMA (5L<<4) +#define BNX2_DMA_TAG_RAM_04_SWAP (0x3L<<7) +#define BNX2_DMA_TAG_RAM_04_SWAP_CONFIG (0L<<7) +#define BNX2_DMA_TAG_RAM_04_SWAP_DATA (1L<<7) +#define BNX2_DMA_TAG_RAM_04_SWAP_CONTROL (2L<<7) +#define BNX2_DMA_TAG_RAM_04_FUNCTION (1L<<9) +#define BNX2_DMA_TAG_RAM_04_VALID (1L<<10) + +#define BNX2_DMA_TAG_RAM_05 0x00000c44 +#define BNX2_DMA_TAG_RAM_05_CHANNEL (0xfL<<0) +#define BNX2_DMA_TAG_RAM_05_MASTER (0x7L<<4) +#define BNX2_DMA_TAG_RAM_05_MASTER_CTX (0L<<4) +#define BNX2_DMA_TAG_RAM_05_MASTER_RBDC (1L<<4) +#define BNX2_DMA_TAG_RAM_05_MASTER_TBDC (2L<<4) +#define BNX2_DMA_TAG_RAM_05_MASTER_COM (3L<<4) +#define BNX2_DMA_TAG_RAM_05_MASTER_CP (4L<<4) +#define BNX2_DMA_TAG_RAM_05_MASTER_TDMA (5L<<4) +#define BNX2_DMA_TAG_RAM_05_SWAP (0x3L<<7) +#define BNX2_DMA_TAG_RAM_05_SWAP_CONFIG (0L<<7) +#define BNX2_DMA_TAG_RAM_05_SWAP_DATA (1L<<7) +#define BNX2_DMA_TAG_RAM_05_SWAP_CONTROL (2L<<7) +#define BNX2_DMA_TAG_RAM_05_FUNCTION (1L<<9) +#define BNX2_DMA_TAG_RAM_05_VALID (1L<<10) + +#define BNX2_DMA_TAG_RAM_06 0x00000c48 +#define BNX2_DMA_TAG_RAM_06_CHANNEL (0xfL<<0) +#define BNX2_DMA_TAG_RAM_06_MASTER (0x7L<<4) +#define BNX2_DMA_TAG_RAM_06_MASTER_CTX (0L<<4) +#define BNX2_DMA_TAG_RAM_06_MASTER_RBDC (1L<<4) +#define BNX2_DMA_TAG_RAM_06_MASTER_TBDC (2L<<4) +#define BNX2_DMA_TAG_RAM_06_MASTER_COM (3L<<4) +#define BNX2_DMA_TAG_RAM_06_MASTER_CP (4L<<4) +#define BNX2_DMA_TAG_RAM_06_MASTER_TDMA (5L<<4) +#define BNX2_DMA_TAG_RAM_06_SWAP (0x3L<<7) +#define BNX2_DMA_TAG_RAM_06_SWAP_CONFIG (0L<<7) +#define BNX2_DMA_TAG_RAM_06_SWAP_DATA (1L<<7) +#define BNX2_DMA_TAG_RAM_06_SWAP_CONTROL (2L<<7) +#define BNX2_DMA_TAG_RAM_06_FUNCTION (1L<<9) +#define BNX2_DMA_TAG_RAM_06_VALID (1L<<10) + +#define BNX2_DMA_TAG_RAM_07 0x00000c4c +#define BNX2_DMA_TAG_RAM_07_CHANNEL (0xfL<<0) +#define BNX2_DMA_TAG_RAM_07_MASTER (0x7L<<4) +#define BNX2_DMA_TAG_RAM_07_MASTER_CTX (0L<<4) +#define BNX2_DMA_TAG_RAM_07_MASTER_RBDC (1L<<4) +#define BNX2_DMA_TAG_RAM_07_MASTER_TBDC (2L<<4) +#define BNX2_DMA_TAG_RAM_07_MASTER_COM (3L<<4) +#define BNX2_DMA_TAG_RAM_07_MASTER_CP (4L<<4) +#define BNX2_DMA_TAG_RAM_07_MASTER_TDMA (5L<<4) +#define BNX2_DMA_TAG_RAM_07_SWAP (0x3L<<7) +#define BNX2_DMA_TAG_RAM_07_SWAP_CONFIG (0L<<7) +#define BNX2_DMA_TAG_RAM_07_SWAP_DATA (1L<<7) +#define BNX2_DMA_TAG_RAM_07_SWAP_CONTROL (2L<<7) +#define BNX2_DMA_TAG_RAM_07_FUNCTION (1L<<9) +#define BNX2_DMA_TAG_RAM_07_VALID (1L<<10) + +#define BNX2_DMA_TAG_RAM_08 0x00000c50 +#define BNX2_DMA_TAG_RAM_08_CHANNEL (0xfL<<0) +#define BNX2_DMA_TAG_RAM_08_MASTER (0x7L<<4) +#define BNX2_DMA_TAG_RAM_08_MASTER_CTX (0L<<4) +#define BNX2_DMA_TAG_RAM_08_MASTER_RBDC (1L<<4) +#define BNX2_DMA_TAG_RAM_08_MASTER_TBDC (2L<<4) +#define BNX2_DMA_TAG_RAM_08_MASTER_COM (3L<<4) +#define BNX2_DMA_TAG_RAM_08_MASTER_CP (4L<<4) +#define BNX2_DMA_TAG_RAM_08_MASTER_TDMA (5L<<4) +#define BNX2_DMA_TAG_RAM_08_SWAP (0x3L<<7) +#define BNX2_DMA_TAG_RAM_08_SWAP_CONFIG (0L<<7) +#define BNX2_DMA_TAG_RAM_08_SWAP_DATA (1L<<7) +#define BNX2_DMA_TAG_RAM_08_SWAP_CONTROL (2L<<7) +#define BNX2_DMA_TAG_RAM_08_FUNCTION (1L<<9) +#define BNX2_DMA_TAG_RAM_08_VALID (1L<<10) + +#define BNX2_DMA_TAG_RAM_09 0x00000c54 +#define BNX2_DMA_TAG_RAM_09_CHANNEL (0xfL<<0) +#define BNX2_DMA_TAG_RAM_09_MASTER (0x7L<<4) +#define BNX2_DMA_TAG_RAM_09_MASTER_CTX (0L<<4) +#define BNX2_DMA_TAG_RAM_09_MASTER_RBDC (1L<<4) +#define BNX2_DMA_TAG_RAM_09_MASTER_TBDC (2L<<4) +#define BNX2_DMA_TAG_RAM_09_MASTER_COM (3L<<4) +#define BNX2_DMA_TAG_RAM_09_MASTER_CP (4L<<4) +#define BNX2_DMA_TAG_RAM_09_MASTER_TDMA (5L<<4) +#define BNX2_DMA_TAG_RAM_09_SWAP (0x3L<<7) +#define BNX2_DMA_TAG_RAM_09_SWAP_CONFIG (0L<<7) +#define BNX2_DMA_TAG_RAM_09_SWAP_DATA (1L<<7) +#define BNX2_DMA_TAG_RAM_09_SWAP_CONTROL (2L<<7) +#define BNX2_DMA_TAG_RAM_09_FUNCTION (1L<<9) +#define BNX2_DMA_TAG_RAM_09_VALID (1L<<10) + +#define BNX2_DMA_TAG_RAM_10 0x00000c58 +#define BNX2_DMA_TAG_RAM_10_CHANNEL (0xfL<<0) +#define BNX2_DMA_TAG_RAM_10_MASTER (0x7L<<4) +#define BNX2_DMA_TAG_RAM_10_MASTER_CTX (0L<<4) +#define BNX2_DMA_TAG_RAM_10_MASTER_RBDC (1L<<4) +#define BNX2_DMA_TAG_RAM_10_MASTER_TBDC (2L<<4) +#define BNX2_DMA_TAG_RAM_10_MASTER_COM (3L<<4) +#define BNX2_DMA_TAG_RAM_10_MASTER_CP (4L<<4) +#define BNX2_DMA_TAG_RAM_10_MASTER_TDMA (5L<<4) +#define BNX2_DMA_TAG_RAM_10_SWAP (0x3L<<7) +#define BNX2_DMA_TAG_RAM_10_SWAP_CONFIG (0L<<7) +#define BNX2_DMA_TAG_RAM_10_SWAP_DATA (1L<<7) +#define BNX2_DMA_TAG_RAM_10_SWAP_CONTROL (2L<<7) +#define BNX2_DMA_TAG_RAM_10_FUNCTION (1L<<9) +#define BNX2_DMA_TAG_RAM_10_VALID (1L<<10) + +#define BNX2_DMA_TAG_RAM_11 0x00000c5c +#define BNX2_DMA_TAG_RAM_11_CHANNEL (0xfL<<0) +#define BNX2_DMA_TAG_RAM_11_MASTER (0x7L<<4) +#define BNX2_DMA_TAG_RAM_11_MASTER_CTX (0L<<4) +#define BNX2_DMA_TAG_RAM_11_MASTER_RBDC (1L<<4) +#define BNX2_DMA_TAG_RAM_11_MASTER_TBDC (2L<<4) +#define BNX2_DMA_TAG_RAM_11_MASTER_COM (3L<<4) +#define BNX2_DMA_TAG_RAM_11_MASTER_CP (4L<<4) +#define BNX2_DMA_TAG_RAM_11_MASTER_TDMA (5L<<4) +#define BNX2_DMA_TAG_RAM_11_SWAP (0x3L<<7) +#define BNX2_DMA_TAG_RAM_11_SWAP_CONFIG (0L<<7) +#define BNX2_DMA_TAG_RAM_11_SWAP_DATA (1L<<7) +#define BNX2_DMA_TAG_RAM_11_SWAP_CONTROL (2L<<7) +#define BNX2_DMA_TAG_RAM_11_FUNCTION (1L<<9) +#define BNX2_DMA_TAG_RAM_11_VALID (1L<<10) + #define BNX2_DMA_RCHAN_STAT_22 0x00000c60 #define BNX2_DMA_RCHAN_STAT_30 0x00000c64 #define BNX2_DMA_RCHAN_STAT_31 0x00000c68 @@ -1336,6 +2345,25 @@ struct l2_fhdr { */ #define BNX2_CTX_COMMAND 0x00001000 #define BNX2_CTX_COMMAND_ENABLED (1L<<0) +#define BNX2_CTX_COMMAND_DISABLE_USAGE_CNT (1L<<1) +#define BNX2_CTX_COMMAND_DISABLE_PLRU (1L<<2) +#define BNX2_CTX_COMMAND_DISABLE_COMBINE_READ (1L<<3) +#define BNX2_CTX_COMMAND_FLUSH_AHEAD (0x1fL<<8) +#define BNX2_CTX_COMMAND_MEM_INIT (1L<<13) +#define BNX2_CTX_COMMAND_PAGE_SIZE (0xfL<<16) +#define BNX2_CTX_COMMAND_PAGE_SIZE_256 (0L<<16) +#define BNX2_CTX_COMMAND_PAGE_SIZE_512 (1L<<16) +#define BNX2_CTX_COMMAND_PAGE_SIZE_1K (2L<<16) +#define BNX2_CTX_COMMAND_PAGE_SIZE_2K (3L<<16) +#define BNX2_CTX_COMMAND_PAGE_SIZE_4K (4L<<16) +#define BNX2_CTX_COMMAND_PAGE_SIZE_8K (5L<<16) +#define BNX2_CTX_COMMAND_PAGE_SIZE_16K (6L<<16) +#define BNX2_CTX_COMMAND_PAGE_SIZE_32K (7L<<16) +#define BNX2_CTX_COMMAND_PAGE_SIZE_64K (8L<<16) +#define BNX2_CTX_COMMAND_PAGE_SIZE_128K (9L<<16) +#define BNX2_CTX_COMMAND_PAGE_SIZE_256K (10L<<16) +#define BNX2_CTX_COMMAND_PAGE_SIZE_512K (11L<<16) +#define BNX2_CTX_COMMAND_PAGE_SIZE_1M (12L<<16) #define BNX2_CTX_STATUS 0x00001004 #define BNX2_CTX_STATUS_LOCK_WAIT (1L<<0) @@ -1343,6 +2371,13 @@ struct l2_fhdr { #define BNX2_CTX_STATUS_WRITE_STAT (1L<<17) #define BNX2_CTX_STATUS_ACC_STALL_STAT (1L<<18) #define BNX2_CTX_STATUS_LOCK_STALL_STAT (1L<<19) +#define BNX2_CTX_STATUS_EXT_READ_STAT (1L<<20) +#define BNX2_CTX_STATUS_EXT_WRITE_STAT (1L<<21) +#define BNX2_CTX_STATUS_MISS_STAT (1L<<22) +#define BNX2_CTX_STATUS_HIT_STAT (1L<<23) +#define BNX2_CTX_STATUS_DEAD_LOCK (1L<<24) +#define BNX2_CTX_STATUS_USAGE_CNT_ERR (1L<<25) +#define BNX2_CTX_STATUS_INVALID_PAGE (1L<<26) #define BNX2_CTX_VIRT_ADDR 0x00001008 #define BNX2_CTX_VIRT_ADDR_VIRT_ADDR (0x7fffL<<6) @@ -1357,10 +2392,15 @@ struct l2_fhdr { #define BNX2_CTX_LOCK 0x00001018 #define BNX2_CTX_LOCK_TYPE (0x7L<<0) #define BNX2_CTX_LOCK_TYPE_LOCK_TYPE_VOID (0x0L<<0) -#define BNX2_CTX_LOCK_TYPE_LOCK_TYPE_COMPLETE (0x7L<<0) #define BNX2_CTX_LOCK_TYPE_LOCK_TYPE_PROTOCOL (0x1L<<0) #define BNX2_CTX_LOCK_TYPE_LOCK_TYPE_TX (0x2L<<0) #define BNX2_CTX_LOCK_TYPE_LOCK_TYPE_TIMER (0x4L<<0) +#define BNX2_CTX_LOCK_TYPE_LOCK_TYPE_COMPLETE (0x7L<<0) +#define BNX2_CTX_LOCK_TYPE_VOID_XI (0L<<0) +#define BNX2_CTX_LOCK_TYPE_PROTOCOL_XI (1L<<0) +#define BNX2_CTX_LOCK_TYPE_TX_XI (2L<<0) +#define BNX2_CTX_LOCK_TYPE_TIMER_XI (4L<<0) +#define BNX2_CTX_LOCK_TYPE_COMPLETE_XI (7L<<0) #define BNX2_CTX_LOCK_CID_VALUE (0x3fffL<<7) #define BNX2_CTX_LOCK_GRANTED (1L<<26) #define BNX2_CTX_LOCK_MODE (0x7L<<27) @@ -1370,21 +2410,89 @@ struct l2_fhdr { #define BNX2_CTX_LOCK_STATUS (1L<<30) #define BNX2_CTX_LOCK_REQ (1L<<31) +#define BNX2_CTX_CTX_CTRL 0x0000101c +#define BNX2_CTX_CTX_CTRL_CTX_ADDR (0x7ffffL<<2) +#define BNX2_CTX_CTX_CTRL_MOD_USAGE_CNT (0x3L<<21) +#define BNX2_CTX_CTX_CTRL_NO_RAM_ACC (1L<<23) +#define BNX2_CTX_CTX_CTRL_PREFETCH_SIZE (0x3L<<24) +#define BNX2_CTX_CTX_CTRL_ATTR (1L<<26) +#define BNX2_CTX_CTX_CTRL_WRITE_REQ (1L<<30) +#define BNX2_CTX_CTX_CTRL_READ_REQ (1L<<31) + +#define BNX2_CTX_CTX_DATA 0x00001020 #define BNX2_CTX_ACCESS_STATUS 0x00001040 #define BNX2_CTX_ACCESS_STATUS_MASTERENCODED (0xfL<<0) #define BNX2_CTX_ACCESS_STATUS_ACCESSMEMORYSM (0x3L<<10) #define BNX2_CTX_ACCESS_STATUS_PAGETABLEINITSM (0x3L<<12) #define BNX2_CTX_ACCESS_STATUS_ACCESSMEMORYINITSM (0x3L<<14) #define BNX2_CTX_ACCESS_STATUS_QUALIFIED_REQUEST (0x7ffL<<17) +#define BNX2_CTX_ACCESS_STATUS_CAMMASTERENCODED_XI (0x1fL<<0) +#define BNX2_CTX_ACCESS_STATUS_CACHEMASTERENCODED_XI (0x1fL<<5) +#define BNX2_CTX_ACCESS_STATUS_REQUEST_XI (0x3fffffL<<10) #define BNX2_CTX_DBG_LOCK_STATUS 0x00001044 #define BNX2_CTX_DBG_LOCK_STATUS_SM (0x3ffL<<0) #define BNX2_CTX_DBG_LOCK_STATUS_MATCH (0x3ffL<<22) +#define BNX2_CTX_CACHE_CTRL_STATUS 0x00001048 +#define BNX2_CTX_CACHE_CTRL_STATUS_RFIFO_OVERFLOW (1L<<0) +#define BNX2_CTX_CACHE_CTRL_STATUS_INVALID_READ_COMP (1L<<1) +#define BNX2_CTX_CACHE_CTRL_STATUS_FLUSH_START (1L<<6) +#define BNX2_CTX_CACHE_CTRL_STATUS_FREE_ENTRY_CNT (0x3fL<<7) +#define BNX2_CTX_CACHE_CTRL_STATUS_CACHE_ENTRY_NEEDED (0x3fL<<13) +#define BNX2_CTX_CACHE_CTRL_STATUS_RD_CHAN0_ACTIVE (1L<<19) +#define BNX2_CTX_CACHE_CTRL_STATUS_RD_CHAN1_ACTIVE (1L<<20) +#define BNX2_CTX_CACHE_CTRL_STATUS_RD_CHAN2_ACTIVE (1L<<21) +#define BNX2_CTX_CACHE_CTRL_STATUS_RD_CHAN3_ACTIVE (1L<<22) +#define BNX2_CTX_CACHE_CTRL_STATUS_RD_CHAN4_ACTIVE (1L<<23) +#define BNX2_CTX_CACHE_CTRL_STATUS_RD_CHAN5_ACTIVE (1L<<24) +#define BNX2_CTX_CACHE_CTRL_STATUS_RD_CHAN6_ACTIVE (1L<<25) +#define BNX2_CTX_CACHE_CTRL_STATUS_RD_CHAN7_ACTIVE (1L<<26) +#define BNX2_CTX_CACHE_CTRL_STATUS_RD_CHAN8_ACTIVE (1L<<27) +#define BNX2_CTX_CACHE_CTRL_STATUS_RD_CHAN9_ACTIVE (1L<<28) +#define BNX2_CTX_CACHE_CTRL_STATUS_RD_CHAN10_ACTIVE (1L<<29) + +#define BNX2_CTX_CACHE_CTRL_SM_STATUS 0x0000104c +#define BNX2_CTX_CACHE_CTRL_SM_STATUS_CS_DWC (0x7L<<0) +#define BNX2_CTX_CACHE_CTRL_SM_STATUS_CS_WFIFOC (0x7L<<3) +#define BNX2_CTX_CACHE_CTRL_SM_STATUS_CS_RTAGC (0x7L<<6) +#define BNX2_CTX_CACHE_CTRL_SM_STATUS_CS_RFIFOC (0x7L<<9) +#define BNX2_CTX_CACHE_CTRL_SM_STATUS_INVALID_BLK_ADDR (0x7fffL<<16) + +#define BNX2_CTX_CACHE_STATUS 0x00001050 +#define BNX2_CTX_CACHE_STATUS_HELD_ENTRIES (0x3ffL<<0) +#define BNX2_CTX_CACHE_STATUS_MAX_HELD_ENTRIES (0x3ffL<<16) + +#define BNX2_CTX_DMA_STATUS 0x00001054 +#define BNX2_CTX_DMA_STATUS_RD_CHAN0_STATUS (0x3L<<0) +#define BNX2_CTX_DMA_STATUS_RD_CHAN1_STATUS (0x3L<<2) +#define BNX2_CTX_DMA_STATUS_RD_CHAN2_STATUS (0x3L<<4) +#define BNX2_CTX_DMA_STATUS_RD_CHAN3_STATUS (0x3L<<6) +#define BNX2_CTX_DMA_STATUS_RD_CHAN4_STATUS (0x3L<<8) +#define BNX2_CTX_DMA_STATUS_RD_CHAN5_STATUS (0x3L<<10) +#define BNX2_CTX_DMA_STATUS_RD_CHAN6_STATUS (0x3L<<12) +#define BNX2_CTX_DMA_STATUS_RD_CHAN7_STATUS (0x3L<<14) +#define BNX2_CTX_DMA_STATUS_RD_CHAN8_STATUS (0x3L<<16) +#define BNX2_CTX_DMA_STATUS_RD_CHAN9_STATUS (0x3L<<18) +#define BNX2_CTX_DMA_STATUS_RD_CHAN10_STATUS (0x3L<<20) + +#define BNX2_CTX_REP_STATUS 0x00001058 +#define BNX2_CTX_REP_STATUS_ERROR_ENTRY (0x3ffL<<0) +#define BNX2_CTX_REP_STATUS_ERROR_CLIENT_ID (0x1fL<<10) +#define BNX2_CTX_REP_STATUS_USAGE_CNT_MAX_ERR (1L<<16) +#define BNX2_CTX_REP_STATUS_USAGE_CNT_MIN_ERR (1L<<17) +#define BNX2_CTX_REP_STATUS_USAGE_CNT_MISS_ERR (1L<<18) + +#define BNX2_CTX_CKSUM_ERROR_STATUS 0x0000105c +#define BNX2_CTX_CKSUM_ERROR_STATUS_CALCULATED (0xffffL<<0) +#define BNX2_CTX_CKSUM_ERROR_STATUS_EXPECTED (0xffffL<<16) + #define BNX2_CTX_CHNL_LOCK_STATUS_0 0x00001080 #define BNX2_CTX_CHNL_LOCK_STATUS_0_CID (0x3fffL<<0) #define BNX2_CTX_CHNL_LOCK_STATUS_0_TYPE (0x3L<<14) #define BNX2_CTX_CHNL_LOCK_STATUS_0_MODE (1L<<16) +#define BNX2_CTX_CHNL_LOCK_STATUS_0_MODE_XI (1L<<14) +#define BNX2_CTX_CHNL_LOCK_STATUS_0_TYPE_XI (0x7L<<15) #define BNX2_CTX_CHNL_LOCK_STATUS_1 0x00001084 #define BNX2_CTX_CHNL_LOCK_STATUS_2 0x00001088 @@ -1394,6 +2502,26 @@ struct l2_fhdr { #define BNX2_CTX_CHNL_LOCK_STATUS_6 0x00001098 #define BNX2_CTX_CHNL_LOCK_STATUS_7 0x0000109c #define BNX2_CTX_CHNL_LOCK_STATUS_8 0x000010a0 +#define BNX2_CTX_CHNL_LOCK_STATUS_9 0x000010a4 + +#define BNX2_CTX_CACHE_DATA 0x000010c4 +#define BNX2_CTX_HOST_PAGE_TBL_CTRL 0x000010c8 +#define BNX2_CTX_HOST_PAGE_TBL_CTRL_PAGE_TBL_ADDR (0x1ffL<<0) +#define BNX2_CTX_HOST_PAGE_TBL_CTRL_WRITE_REQ (1L<<30) +#define BNX2_CTX_HOST_PAGE_TBL_CTRL_READ_REQ (1L<<31) + +#define BNX2_CTX_HOST_PAGE_TBL_DATA0 0x000010cc +#define BNX2_CTX_HOST_PAGE_TBL_DATA0_VALID (1L<<0) +#define BNX2_CTX_HOST_PAGE_TBL_DATA0_VALUE (0xffffffL<<8) + +#define BNX2_CTX_HOST_PAGE_TBL_DATA1 0x000010d0 +#define BNX2_CTX_CAM_CTRL 0x000010d4 +#define BNX2_CTX_CAM_CTRL_CAM_ADDR (0x3ffL<<0) +#define BNX2_CTX_CAM_CTRL_RESET (1L<<27) +#define BNX2_CTX_CAM_CTRL_INVALIDATE (1L<<28) +#define BNX2_CTX_CAM_CTRL_SEARCH (1L<<29) +#define BNX2_CTX_CAM_CTRL_WRITE_REQ (1L<<30) +#define BNX2_CTX_CAM_CTRL_READ_REQ (1L<<31) /* @@ -1407,14 +2535,16 @@ struct l2_fhdr { #define BNX2_EMAC_MODE_PORT_NONE (0L<<2) #define BNX2_EMAC_MODE_PORT_MII (1L<<2) #define BNX2_EMAC_MODE_PORT_GMII (2L<<2) -#define BNX2_EMAC_MODE_PORT_MII_10 (3L<<2) +#define BNX2_EMAC_MODE_PORT_MII_10M (3L<<2) #define BNX2_EMAC_MODE_MAC_LOOP (1L<<4) -#define BNX2_EMAC_MODE_25G (1L<<5) +#define BNX2_EMAC_MODE_25G_MODE (1L<<5) #define BNX2_EMAC_MODE_TAGGED_MAC_CTL (1L<<7) #define BNX2_EMAC_MODE_TX_BURST (1L<<8) #define BNX2_EMAC_MODE_MAX_DEFER_DROP_ENA (1L<<9) #define BNX2_EMAC_MODE_EXT_LINK_POL (1L<<10) #define BNX2_EMAC_MODE_FORCE_LINK (1L<<11) +#define BNX2_EMAC_MODE_SERDES_MODE (1L<<12) +#define BNX2_EMAC_MODE_BOND_OVRD (1L<<13) #define BNX2_EMAC_MODE_MPKT (1L<<18) #define BNX2_EMAC_MODE_MPKT_RCVD (1L<<19) #define BNX2_EMAC_MODE_ACPI_RCVD (1L<<20) @@ -1422,6 +2552,11 @@ struct l2_fhdr { #define BNX2_EMAC_STATUS 0x00001404 #define BNX2_EMAC_STATUS_LINK (1L<<11) #define BNX2_EMAC_STATUS_LINK_CHANGE (1L<<12) +#define BNX2_EMAC_STATUS_SERDES_AUTONEG_COMPLETE (1L<<13) +#define BNX2_EMAC_STATUS_SERDES_AUTONEG_CHANGE (1L<<14) +#define BNX2_EMAC_STATUS_SERDES_NXT_PG_CHANGE (1L<<16) +#define BNX2_EMAC_STATUS_SERDES_RX_CONFIG_IS_0 (1L<<17) +#define BNX2_EMAC_STATUS_SERDES_RX_CONFIG_IS_0_CHANGE (1L<<18) #define BNX2_EMAC_STATUS_MI_COMPLETE (1L<<22) #define BNX2_EMAC_STATUS_MI_INT (1L<<23) #define BNX2_EMAC_STATUS_AP_ERROR (1L<<24) @@ -1429,6 +2564,9 @@ struct l2_fhdr { #define BNX2_EMAC_ATTENTION_ENA 0x00001408 #define BNX2_EMAC_ATTENTION_ENA_LINK (1L<<11) +#define BNX2_EMAC_ATTENTION_ENA_AUTONEG_CHANGE (1L<<14) +#define BNX2_EMAC_ATTENTION_ENA_NXT_PG_CHANGE (1L<<16) +#define BNX2_EMAC_ATTENTION_ENA_SERDES_RX_CONFIG_IS_0_CHANGE (1L<<18) #define BNX2_EMAC_ATTENTION_ENA_MI_COMPLETE (1L<<22) #define BNX2_EMAC_ATTENTION_ENA_MI_INT (1L<<23) #define BNX2_EMAC_ATTENTION_ENA_AP_ERROR (1L<<24) @@ -1445,6 +2583,13 @@ struct l2_fhdr { #define BNX2_EMAC_LED_100MB (1L<<8) #define BNX2_EMAC_LED_10MB (1L<<9) #define BNX2_EMAC_LED_TRAFFIC_STAT (1L<<10) +#define BNX2_EMAC_LED_2500MB (1L<<11) +#define BNX2_EMAC_LED_2500MB_OVERRIDE (1L<<12) +#define BNX2_EMAC_LED_ACTIVITY_SEL (0x3L<<17) +#define BNX2_EMAC_LED_ACTIVITY_SEL_0 (0L<<17) +#define BNX2_EMAC_LED_ACTIVITY_SEL_1 (1L<<17) +#define BNX2_EMAC_LED_ACTIVITY_SEL_2 (2L<<17) +#define BNX2_EMAC_LED_ACTIVITY_SEL_3 (3L<<17) #define BNX2_EMAC_LED_BLNK_RATE (0xfffL<<19) #define BNX2_EMAC_LED_BLNK_RATE_ENA (1L<<31) @@ -1515,9 +2660,15 @@ struct l2_fhdr { #define BNX2_EMAC_MDIO_COMM_PHY_ADDR (0x1fL<<21) #define BNX2_EMAC_MDIO_COMM_COMMAND (0x3L<<26) #define BNX2_EMAC_MDIO_COMM_COMMAND_UNDEFINED_0 (0L<<26) +#define BNX2_EMAC_MDIO_COMM_COMMAND_ADDRESS (0L<<26) #define BNX2_EMAC_MDIO_COMM_COMMAND_WRITE (1L<<26) #define BNX2_EMAC_MDIO_COMM_COMMAND_READ (2L<<26) +#define BNX2_EMAC_MDIO_COMM_COMMAND_WRITE_22_XI (1L<<26) +#define BNX2_EMAC_MDIO_COMM_COMMAND_WRITE_45_XI (1L<<26) +#define BNX2_EMAC_MDIO_COMM_COMMAND_READ_22_XI (2L<<26) +#define BNX2_EMAC_MDIO_COMM_COMMAND_READ_INC_45_XI (2L<<26) #define BNX2_EMAC_MDIO_COMM_COMMAND_UNDEFINED_3 (3L<<26) +#define BNX2_EMAC_MDIO_COMM_COMMAND_READ_45 (3L<<26) #define BNX2_EMAC_MDIO_COMM_FAIL (1L<<28) #define BNX2_EMAC_MDIO_COMM_START_BUSY (1L<<29) #define BNX2_EMAC_MDIO_COMM_DISEXT (1L<<30) @@ -1534,13 +2685,17 @@ struct l2_fhdr { #define BNX2_EMAC_MDIO_MODE_MDIO_OE (1L<<10) #define BNX2_EMAC_MDIO_MODE_MDC (1L<<11) #define BNX2_EMAC_MDIO_MODE_MDINT (1L<<12) +#define BNX2_EMAC_MDIO_MODE_EXT_MDINT (1L<<13) #define BNX2_EMAC_MDIO_MODE_CLOCK_CNT (0x1fL<<16) +#define BNX2_EMAC_MDIO_MODE_CLOCK_CNT_XI (0x3fL<<16) +#define BNX2_EMAC_MDIO_MODE_CLAUSE_45_XI (1L<<31) #define BNX2_EMAC_MDIO_AUTO_STATUS 0x000014b8 #define BNX2_EMAC_MDIO_AUTO_STATUS_AUTO_ERR (1L<<0) #define BNX2_EMAC_TX_MODE 0x000014bc #define BNX2_EMAC_TX_MODE_RESET (1L<<0) +#define BNX2_EMAC_TX_MODE_CS16_TEST (1L<<2) #define BNX2_EMAC_TX_MODE_EXT_PAUSE_EN (1L<<3) #define BNX2_EMAC_TX_MODE_FLOW_EN (1L<<4) #define BNX2_EMAC_TX_MODE_BIG_BACKOFF (1L<<5) @@ -1553,6 +2708,7 @@ struct l2_fhdr { #define BNX2_EMAC_TX_STATUS_XON_SENT (1L<<2) #define BNX2_EMAC_TX_STATUS_LINK_UP (1L<<3) #define BNX2_EMAC_TX_STATUS_UNDERRUN (1L<<4) +#define BNX2_EMAC_TX_STATUS_CS16_ERROR (1L<<5) #define BNX2_EMAC_TX_LENGTHS 0x000014c4 #define BNX2_EMAC_TX_LENGTHS_SLOT (0xffL<<0) @@ -1586,6 +2742,10 @@ struct l2_fhdr { #define BNX2_EMAC_MULTICAST_HASH5 0x000014e4 #define BNX2_EMAC_MULTICAST_HASH6 0x000014e8 #define BNX2_EMAC_MULTICAST_HASH7 0x000014ec +#define BNX2_EMAC_CKSUM_ERROR_STATUS 0x000014f0 +#define BNX2_EMAC_CKSUM_ERROR_STATUS_CALCULATED (0xffffL<<0) +#define BNX2_EMAC_CKSUM_ERROR_STATUS_EXPECTED (0xffffL<<16) + #define BNX2_EMAC_RX_STAT_IFHCINOCTETS 0x00001500 #define BNX2_EMAC_RX_STAT_IFHCINBADOCTETS 0x00001504 #define BNX2_EMAC_RX_STAT_ETHERSTATSFRAGMENTS 0x00001508 @@ -1608,7 +2768,7 @@ struct l2_fhdr { #define BNX2_EMAC_RX_STAT_ETHERSTATSPKTS256OCTETSTO511OCTETS 0x0000154c #define BNX2_EMAC_RX_STAT_ETHERSTATSPKTS512OCTETSTO1023OCTETS 0x00001550 #define BNX2_EMAC_RX_STAT_ETHERSTATSPKTS1024OCTETSTO1522OCTETS 0x00001554 -#define BNX2_EMAC_RX_STAT_ETHERSTATSPKTS1523OCTETSTO9022OCTETS 0x00001558 +#define BNX2_EMAC_RX_STAT_ETHERSTATSPKTSOVER1522OCTETS 0x00001558 #define BNX2_EMAC_RXMAC_DEBUG0 0x0000155c #define BNX2_EMAC_RXMAC_DEBUG1 0x00001560 #define BNX2_EMAC_RXMAC_DEBUG1_LENGTH_NE_BYTE_COUNT (1L<<0) @@ -1661,9 +2821,9 @@ struct l2_fhdr { #define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_UMAC2 (0x1L<<16) #define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_UMAC3 (0x2L<<16) #define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_UNI (0x3L<<16) -#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_MMAC2 (0x7L<<16) #define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_MMAC3 (0x5L<<16) #define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_PSA1 (0x6L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_MMAC2 (0x7L<<16) #define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_PSA2 (0x7L<<16) #define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_PSA3 (0x8L<<16) #define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_MC2 (0x9L<<16) @@ -1701,7 +2861,7 @@ struct l2_fhdr { #define BNX2_EMAC_RXMAC_DEBUG4_SLOT_FILLED (1L<<23) #define BNX2_EMAC_RXMAC_DEBUG4_FALSE_CARRIER (1L<<24) #define BNX2_EMAC_RXMAC_DEBUG4_LAST_DATA (1L<<25) -#define BNX2_EMAC_RXMAC_DEBUG4_sfd_FOUND (1L<<26) +#define BNX2_EMAC_RXMAC_DEBUG4_SFD_FOUND (1L<<26) #define BNX2_EMAC_RXMAC_DEBUG4_ADVANCE (1L<<27) #define BNX2_EMAC_RXMAC_DEBUG4_START (1L<<28) @@ -1733,6 +2893,7 @@ struct l2_fhdr { #define BNX2_EMAC_RXMAC_DEBUG5_IDI_RPM_ACCEPT (1L<<19) #define BNX2_EMAC_RXMAC_DEBUG5_FMLEN (0xfffL<<20) +#define BNX2_EMAC_RX_STAT_FALSECARRIERERRORS 0x00001574 #define BNX2_EMAC_RX_STAT_AC0 0x00001580 #define BNX2_EMAC_RX_STAT_AC1 0x00001584 #define BNX2_EMAC_RX_STAT_AC2 0x00001588 @@ -1757,6 +2918,7 @@ struct l2_fhdr { #define BNX2_EMAC_RX_STAT_AC21 0x000015d4 #define BNX2_EMAC_RX_STAT_AC22 0x000015d8 #define BNX2_EMAC_RXMAC_SUC_DBG_OVERRUNVEC 0x000015dc +#define BNX2_EMAC_RX_STAT_AC_28 0x000015f4 #define BNX2_EMAC_TX_STAT_IFHCOUTOCTETS 0x00001600 #define BNX2_EMAC_TX_STAT_IFHCOUTBADOCTETS 0x00001604 #define BNX2_EMAC_TX_STAT_ETHERSTATSCOLLISIONS 0x00001608 @@ -1777,7 +2939,7 @@ struct l2_fhdr { #define BNX2_EMAC_TX_STAT_ETHERSTATSPKTS256OCTETSTO511OCTETS 0x00001644 #define BNX2_EMAC_TX_STAT_ETHERSTATSPKTS512OCTETSTO1023OCTETS 0x00001648 #define BNX2_EMAC_TX_STAT_ETHERSTATSPKTS1024OCTETSTO1522OCTETS 0x0000164c -#define BNX2_EMAC_TX_STAT_ETHERSTATSPKTS1523OCTETSTO9022OCTETS 0x00001650 +#define BNX2_EMAC_TX_STAT_ETHERSTATSPKTSOVER1522OCTETS 0x00001650 #define BNX2_EMAC_TX_STAT_DOT3STATSINTERNALMACTRANSMITERRORS 0x00001654 #define BNX2_EMAC_TXMAC_DEBUG0 0x00001658 #define BNX2_EMAC_TXMAC_DEBUG1 0x0000165c @@ -1843,16 +3005,16 @@ struct l2_fhdr { #define BNX2_EMAC_TXMAC_DEBUG4_PAUSE_STATE_IDLE (0x0L<<16) #define BNX2_EMAC_TXMAC_DEBUG4_PAUSE_STATE_MCA1 (0x2L<<16) #define BNX2_EMAC_TXMAC_DEBUG4_PAUSE_STATE_MCA2 (0x3L<<16) +#define BNX2_EMAC_TXMAC_DEBUG4_PAUSE_STATE_SRC3 (0x4L<<16) +#define BNX2_EMAC_TXMAC_DEBUG4_PAUSE_STATE_SRC2 (0x5L<<16) #define BNX2_EMAC_TXMAC_DEBUG4_PAUSE_STATE_MCA3 (0x6L<<16) #define BNX2_EMAC_TXMAC_DEBUG4_PAUSE_STATE_SRC1 (0x7L<<16) -#define BNX2_EMAC_TXMAC_DEBUG4_PAUSE_STATE_SRC2 (0x5L<<16) -#define BNX2_EMAC_TXMAC_DEBUG4_PAUSE_STATE_SRC3 (0x4L<<16) -#define BNX2_EMAC_TXMAC_DEBUG4_PAUSE_STATE_TYPE (0xcL<<16) -#define BNX2_EMAC_TXMAC_DEBUG4_PAUSE_STATE_CMD (0xeL<<16) -#define BNX2_EMAC_TXMAC_DEBUG4_PAUSE_STATE_TIME (0xaL<<16) #define BNX2_EMAC_TXMAC_DEBUG4_PAUSE_STATE_CRC1 (0x8L<<16) #define BNX2_EMAC_TXMAC_DEBUG4_PAUSE_STATE_CRC2 (0x9L<<16) +#define BNX2_EMAC_TXMAC_DEBUG4_PAUSE_STATE_TIME (0xaL<<16) +#define BNX2_EMAC_TXMAC_DEBUG4_PAUSE_STATE_TYPE (0xcL<<16) #define BNX2_EMAC_TXMAC_DEBUG4_PAUSE_STATE_WAIT (0xdL<<16) +#define BNX2_EMAC_TXMAC_DEBUG4_PAUSE_STATE_CMD (0xeL<<16) #define BNX2_EMAC_TXMAC_DEBUG4_STATS0_VALID (1L<<20) #define BNX2_EMAC_TXMAC_DEBUG4_APPEND_CRC (1L<<21) #define BNX2_EMAC_TXMAC_DEBUG4_SLOT_FILLED (1L<<22) @@ -1887,8 +3049,11 @@ struct l2_fhdr { #define BNX2_EMAC_TX_STAT_AC18 0x000016c8 #define BNX2_EMAC_TX_STAT_AC19 0x000016cc #define BNX2_EMAC_TX_STAT_AC20 0x000016d0 -#define BNX2_EMAC_TX_STAT_AC21 0x000016d4 #define BNX2_EMAC_TXMAC_SUC_DBG_OVERRUNVEC 0x000016d8 +#define BNX2_EMAC_TX_RATE_LIMIT_CTRL 0x000016fc +#define BNX2_EMAC_TX_RATE_LIMIT_CTRL_TX_THROTTLE_INC (0x7fL<<0) +#define BNX2_EMAC_TX_RATE_LIMIT_CTRL_TX_THROTTLE_NUM (0x7fL<<16) +#define BNX2_EMAC_TX_RATE_LIMIT_CTRL_RATE_LIMITER_EN (1L<<31) /* @@ -1909,8 +3074,15 @@ struct l2_fhdr { #define BNX2_RPM_CONFIG_ACPI_KEEP (1L<<2) #define BNX2_RPM_CONFIG_MP_KEEP (1L<<3) #define BNX2_RPM_CONFIG_SORT_VECT_VAL (0xfL<<4) +#define BNX2_RPM_CONFIG_DISABLE_WOL_ASSERT (1L<<30) #define BNX2_RPM_CONFIG_IGNORE_VLAN (1L<<31) +#define BNX2_RPM_MGMT_PKT_CTRL 0x0000180c +#define BNX2_RPM_MGMT_PKT_CTRL_MGMT_SORT (0xfL<<0) +#define BNX2_RPM_MGMT_PKT_CTRL_MGMT_RULE (0xfL<<4) +#define BNX2_RPM_MGMT_PKT_CTRL_MGMT_DISCARD_EN (1L<<30) +#define BNX2_RPM_MGMT_PKT_CTRL_MGMT_EN (1L<<31) + #define BNX2_RPM_VLAN_MATCH0 0x00001810 #define BNX2_RPM_VLAN_MATCH0_RPM_VLAN_MTCH0_VALUE (0xfffL<<0) @@ -1931,6 +3103,7 @@ struct l2_fhdr { #define BNX2_RPM_SORT_USER0_PROM_EN (1L<<19) #define BNX2_RPM_SORT_USER0_VLAN_EN (0xfL<<20) #define BNX2_RPM_SORT_USER0_PROM_VLAN (1L<<24) +#define BNX2_RPM_SORT_USER0_VLAN_NOTMATCH (1L<<25) #define BNX2_RPM_SORT_USER0_ENA (1L<<31) #define BNX2_RPM_SORT_USER1 0x00001824 @@ -1968,11 +3141,187 @@ struct l2_fhdr { #define BNX2_RPM_STAT_IFINFTQDISCARDS 0x00001848 #define BNX2_RPM_STAT_IFINMBUFDISCARD 0x0000184c #define BNX2_RPM_STAT_RULE_CHECKER_P4_HIT 0x00001850 +#define BNX2_RPM_IPV6_PROGRAMMABLE_EXTENSION0 0x00001854 +#define BNX2_RPM_IPV6_PROGRAMMABLE_EXTENSION0_NEXT_HEADER_LEN (0xffL<<0) +#define BNX2_RPM_IPV6_PROGRAMMABLE_EXTENSION0_NEXT_HEADER (0xffL<<16) +#define BNX2_RPM_IPV6_PROGRAMMABLE_EXTENSION0_NEXT_HEADER_LEN_TYPE (1L<<30) +#define BNX2_RPM_IPV6_PROGRAMMABLE_EXTENSION0_NEXT_HEADER_EN (1L<<31) + +#define BNX2_RPM_IPV6_PROGRAMMABLE_EXTENSION1 0x00001858 +#define BNX2_RPM_IPV6_PROGRAMMABLE_EXTENSION1_NEXT_HEADER_LEN (0xffL<<0) +#define BNX2_RPM_IPV6_PROGRAMMABLE_EXTENSION1_NEXT_HEADER (0xffL<<16) +#define BNX2_RPM_IPV6_PROGRAMMABLE_EXTENSION1_NEXT_HEADER_LEN_TYPE (1L<<30) +#define BNX2_RPM_IPV6_PROGRAMMABLE_EXTENSION1_NEXT_HEADER_EN (1L<<31) + +#define BNX2_RPM_IPV6_PROGRAMMABLE_EXTENSION2 0x0000185c +#define BNX2_RPM_IPV6_PROGRAMMABLE_EXTENSION2_NEXT_HEADER_LEN (0xffL<<0) +#define BNX2_RPM_IPV6_PROGRAMMABLE_EXTENSION2_NEXT_HEADER (0xffL<<16) +#define BNX2_RPM_IPV6_PROGRAMMABLE_EXTENSION2_NEXT_HEADER_LEN_TYPE (1L<<30) +#define BNX2_RPM_IPV6_PROGRAMMABLE_EXTENSION2_NEXT_HEADER_EN (1L<<31) + +#define BNX2_RPM_IPV6_PROGRAMMABLE_EXTENSION3 0x00001860 +#define BNX2_RPM_IPV6_PROGRAMMABLE_EXTENSION3_NEXT_HEADER_LEN (0xffL<<0) +#define BNX2_RPM_IPV6_PROGRAMMABLE_EXTENSION3_NEXT_HEADER (0xffL<<16) +#define BNX2_RPM_IPV6_PROGRAMMABLE_EXTENSION3_NEXT_HEADER_LEN_TYPE (1L<<30) +#define BNX2_RPM_IPV6_PROGRAMMABLE_EXTENSION3_NEXT_HEADER_EN (1L<<31) + +#define BNX2_RPM_IPV6_PROGRAMMABLE_EXTENSION4 0x00001864 +#define BNX2_RPM_IPV6_PROGRAMMABLE_EXTENSION4_NEXT_HEADER_LEN (0xffL<<0) +#define BNX2_RPM_IPV6_PROGRAMMABLE_EXTENSION4_NEXT_HEADER (0xffL<<16) +#define BNX2_RPM_IPV6_PROGRAMMABLE_EXTENSION4_NEXT_HEADER_LEN_TYPE (1L<<30) +#define BNX2_RPM_IPV6_PROGRAMMABLE_EXTENSION4_NEXT_HEADER_EN (1L<<31) + +#define BNX2_RPM_IPV6_PROGRAMMABLE_EXTENSION5 0x00001868 +#define BNX2_RPM_IPV6_PROGRAMMABLE_EXTENSION5_NEXT_HEADER_LEN (0xffL<<0) +#define BNX2_RPM_IPV6_PROGRAMMABLE_EXTENSION5_NEXT_HEADER (0xffL<<16) +#define BNX2_RPM_IPV6_PROGRAMMABLE_EXTENSION5_NEXT_HEADER_LEN_TYPE (1L<<30) +#define BNX2_RPM_IPV6_PROGRAMMABLE_EXTENSION5_NEXT_HEADER_EN (1L<<31) + +#define BNX2_RPM_IPV6_PROGRAMMABLE_EXTENSION6 0x0000186c +#define BNX2_RPM_IPV6_PROGRAMMABLE_EXTENSION6_NEXT_HEADER_LEN (0xffL<<0) +#define BNX2_RPM_IPV6_PROGRAMMABLE_EXTENSION6_NEXT_HEADER (0xffL<<16) +#define BNX2_RPM_IPV6_PROGRAMMABLE_EXTENSION6_NEXT_HEADER_LEN_TYPE (1L<<30) +#define BNX2_RPM_IPV6_PROGRAMMABLE_EXTENSION6_NEXT_HEADER_EN (1L<<31) + +#define BNX2_RPM_IPV6_PROGRAMMABLE_EXTENSION7 0x00001870 +#define BNX2_RPM_IPV6_PROGRAMMABLE_EXTENSION7_NEXT_HEADER_LEN (0xffL<<0) +#define BNX2_RPM_IPV6_PROGRAMMABLE_EXTENSION7_NEXT_HEADER (0xffL<<16) +#define BNX2_RPM_IPV6_PROGRAMMABLE_EXTENSION7_NEXT_HEADER_LEN_TYPE (1L<<30) +#define BNX2_RPM_IPV6_PROGRAMMABLE_EXTENSION7_NEXT_HEADER_EN (1L<<31) + #define BNX2_RPM_STAT_AC0 0x00001880 #define BNX2_RPM_STAT_AC1 0x00001884 #define BNX2_RPM_STAT_AC2 0x00001888 #define BNX2_RPM_STAT_AC3 0x0000188c #define BNX2_RPM_STAT_AC4 0x00001890 +#define BNX2_RPM_RC_CNTL_16 0x000018e0 +#define BNX2_RPM_RC_CNTL_16_OFFSET (0xffL<<0) +#define BNX2_RPM_RC_CNTL_16_CLASS (0x7L<<8) +#define BNX2_RPM_RC_CNTL_16_PRIORITY (1L<<11) +#define BNX2_RPM_RC_CNTL_16_P4 (1L<<12) +#define BNX2_RPM_RC_CNTL_16_HDR_TYPE (0x7L<<13) +#define BNX2_RPM_RC_CNTL_16_HDR_TYPE_START (0L<<13) +#define BNX2_RPM_RC_CNTL_16_HDR_TYPE_IP (1L<<13) +#define BNX2_RPM_RC_CNTL_16_HDR_TYPE_TCP (2L<<13) +#define BNX2_RPM_RC_CNTL_16_HDR_TYPE_UDP (3L<<13) +#define BNX2_RPM_RC_CNTL_16_HDR_TYPE_DATA (4L<<13) +#define BNX2_RPM_RC_CNTL_16_HDR_TYPE_TCP_UDP (5L<<13) +#define BNX2_RPM_RC_CNTL_16_HDR_TYPE_ICMPV6 (6L<<13) +#define BNX2_RPM_RC_CNTL_16_COMP (0x3L<<16) +#define BNX2_RPM_RC_CNTL_16_COMP_EQUAL (0L<<16) +#define BNX2_RPM_RC_CNTL_16_COMP_NEQUAL (1L<<16) +#define BNX2_RPM_RC_CNTL_16_COMP_GREATER (2L<<16) +#define BNX2_RPM_RC_CNTL_16_COMP_LESS (3L<<16) +#define BNX2_RPM_RC_CNTL_16_MAP (1L<<18) +#define BNX2_RPM_RC_CNTL_16_SBIT (1L<<19) +#define BNX2_RPM_RC_CNTL_16_CMDSEL (0x1fL<<20) +#define BNX2_RPM_RC_CNTL_16_DISCARD (1L<<25) +#define BNX2_RPM_RC_CNTL_16_MASK (1L<<26) +#define BNX2_RPM_RC_CNTL_16_P1 (1L<<27) +#define BNX2_RPM_RC_CNTL_16_P2 (1L<<28) +#define BNX2_RPM_RC_CNTL_16_P3 (1L<<29) +#define BNX2_RPM_RC_CNTL_16_NBIT (1L<<30) + +#define BNX2_RPM_RC_VALUE_MASK_16 0x000018e4 +#define BNX2_RPM_RC_VALUE_MASK_16_VALUE (0xffffL<<0) +#define BNX2_RPM_RC_VALUE_MASK_16_MASK (0xffffL<<16) + +#define BNX2_RPM_RC_CNTL_17 0x000018e8 +#define BNX2_RPM_RC_CNTL_17_OFFSET (0xffL<<0) +#define BNX2_RPM_RC_CNTL_17_CLASS (0x7L<<8) +#define BNX2_RPM_RC_CNTL_17_PRIORITY (1L<<11) +#define BNX2_RPM_RC_CNTL_17_P4 (1L<<12) +#define BNX2_RPM_RC_CNTL_17_HDR_TYPE (0x7L<<13) +#define BNX2_RPM_RC_CNTL_17_HDR_TYPE_START (0L<<13) +#define BNX2_RPM_RC_CNTL_17_HDR_TYPE_IP (1L<<13) +#define BNX2_RPM_RC_CNTL_17_HDR_TYPE_TCP (2L<<13) +#define BNX2_RPM_RC_CNTL_17_HDR_TYPE_UDP (3L<<13) +#define BNX2_RPM_RC_CNTL_17_HDR_TYPE_DATA (4L<<13) +#define BNX2_RPM_RC_CNTL_17_HDR_TYPE_TCP_UDP (5L<<13) +#define BNX2_RPM_RC_CNTL_17_HDR_TYPE_ICMPV6 (6L<<13) +#define BNX2_RPM_RC_CNTL_17_COMP (0x3L<<16) +#define BNX2_RPM_RC_CNTL_17_COMP_EQUAL (0L<<16) +#define BNX2_RPM_RC_CNTL_17_COMP_NEQUAL (1L<<16) +#define BNX2_RPM_RC_CNTL_17_COMP_GREATER (2L<<16) +#define BNX2_RPM_RC_CNTL_17_COMP_LESS (3L<<16) +#define BNX2_RPM_RC_CNTL_17_MAP (1L<<18) +#define BNX2_RPM_RC_CNTL_17_SBIT (1L<<19) +#define BNX2_RPM_RC_CNTL_17_CMDSEL (0x1fL<<20) +#define BNX2_RPM_RC_CNTL_17_DISCARD (1L<<25) +#define BNX2_RPM_RC_CNTL_17_MASK (1L<<26) +#define BNX2_RPM_RC_CNTL_17_P1 (1L<<27) +#define BNX2_RPM_RC_CNTL_17_P2 (1L<<28) +#define BNX2_RPM_RC_CNTL_17_P3 (1L<<29) +#define BNX2_RPM_RC_CNTL_17_NBIT (1L<<30) + +#define BNX2_RPM_RC_VALUE_MASK_17 0x000018ec +#define BNX2_RPM_RC_VALUE_MASK_17_VALUE (0xffffL<<0) +#define BNX2_RPM_RC_VALUE_MASK_17_MASK (0xffffL<<16) + +#define BNX2_RPM_RC_CNTL_18 0x000018f0 +#define BNX2_RPM_RC_CNTL_18_OFFSET (0xffL<<0) +#define BNX2_RPM_RC_CNTL_18_CLASS (0x7L<<8) +#define BNX2_RPM_RC_CNTL_18_PRIORITY (1L<<11) +#define BNX2_RPM_RC_CNTL_18_P4 (1L<<12) +#define BNX2_RPM_RC_CNTL_18_HDR_TYPE (0x7L<<13) +#define BNX2_RPM_RC_CNTL_18_HDR_TYPE_START (0L<<13) +#define BNX2_RPM_RC_CNTL_18_HDR_TYPE_IP (1L<<13) +#define BNX2_RPM_RC_CNTL_18_HDR_TYPE_TCP (2L<<13) +#define BNX2_RPM_RC_CNTL_18_HDR_TYPE_UDP (3L<<13) +#define BNX2_RPM_RC_CNTL_18_HDR_TYPE_DATA (4L<<13) +#define BNX2_RPM_RC_CNTL_18_HDR_TYPE_TCP_UDP (5L<<13) +#define BNX2_RPM_RC_CNTL_18_HDR_TYPE_ICMPV6 (6L<<13) +#define BNX2_RPM_RC_CNTL_18_COMP (0x3L<<16) +#define BNX2_RPM_RC_CNTL_18_COMP_EQUAL (0L<<16) +#define BNX2_RPM_RC_CNTL_18_COMP_NEQUAL (1L<<16) +#define BNX2_RPM_RC_CNTL_18_COMP_GREATER (2L<<16) +#define BNX2_RPM_RC_CNTL_18_COMP_LESS (3L<<16) +#define BNX2_RPM_RC_CNTL_18_MAP (1L<<18) +#define BNX2_RPM_RC_CNTL_18_SBIT (1L<<19) +#define BNX2_RPM_RC_CNTL_18_CMDSEL (0x1fL<<20) +#define BNX2_RPM_RC_CNTL_18_DISCARD (1L<<25) +#define BNX2_RPM_RC_CNTL_18_MASK (1L<<26) +#define BNX2_RPM_RC_CNTL_18_P1 (1L<<27) +#define BNX2_RPM_RC_CNTL_18_P2 (1L<<28) +#define BNX2_RPM_RC_CNTL_18_P3 (1L<<29) +#define BNX2_RPM_RC_CNTL_18_NBIT (1L<<30) + +#define BNX2_RPM_RC_VALUE_MASK_18 0x000018f4 +#define BNX2_RPM_RC_VALUE_MASK_18_VALUE (0xffffL<<0) +#define BNX2_RPM_RC_VALUE_MASK_18_MASK (0xffffL<<16) + +#define BNX2_RPM_RC_CNTL_19 0x000018f8 +#define BNX2_RPM_RC_CNTL_19_OFFSET (0xffL<<0) +#define BNX2_RPM_RC_CNTL_19_CLASS (0x7L<<8) +#define BNX2_RPM_RC_CNTL_19_PRIORITY (1L<<11) +#define BNX2_RPM_RC_CNTL_19_P4 (1L<<12) +#define BNX2_RPM_RC_CNTL_19_HDR_TYPE (0x7L<<13) +#define BNX2_RPM_RC_CNTL_19_HDR_TYPE_START (0L<<13) +#define BNX2_RPM_RC_CNTL_19_HDR_TYPE_IP (1L<<13) +#define BNX2_RPM_RC_CNTL_19_HDR_TYPE_TCP (2L<<13) +#define BNX2_RPM_RC_CNTL_19_HDR_TYPE_UDP (3L<<13) +#define BNX2_RPM_RC_CNTL_19_HDR_TYPE_DATA (4L<<13) +#define BNX2_RPM_RC_CNTL_19_HDR_TYPE_TCP_UDP (5L<<13) +#define BNX2_RPM_RC_CNTL_19_HDR_TYPE_ICMPV6 (6L<<13) +#define BNX2_RPM_RC_CNTL_19_COMP (0x3L<<16) +#define BNX2_RPM_RC_CNTL_19_COMP_EQUAL (0L<<16) +#define BNX2_RPM_RC_CNTL_19_COMP_NEQUAL (1L<<16) +#define BNX2_RPM_RC_CNTL_19_COMP_GREATER (2L<<16) +#define BNX2_RPM_RC_CNTL_19_COMP_LESS (3L<<16) +#define BNX2_RPM_RC_CNTL_19_MAP (1L<<18) +#define BNX2_RPM_RC_CNTL_19_SBIT (1L<<19) +#define BNX2_RPM_RC_CNTL_19_CMDSEL (0x1fL<<20) +#define BNX2_RPM_RC_CNTL_19_DISCARD (1L<<25) +#define BNX2_RPM_RC_CNTL_19_MASK (1L<<26) +#define BNX2_RPM_RC_CNTL_19_P1 (1L<<27) +#define BNX2_RPM_RC_CNTL_19_P2 (1L<<28) +#define BNX2_RPM_RC_CNTL_19_P3 (1L<<29) +#define BNX2_RPM_RC_CNTL_19_NBIT (1L<<30) + +#define BNX2_RPM_RC_VALUE_MASK_19 0x000018fc +#define BNX2_RPM_RC_VALUE_MASK_19_VALUE (0xffffL<<0) +#define BNX2_RPM_RC_VALUE_MASK_19_MASK (0xffffL<<16) + #define BNX2_RPM_RC_CNTL_0 0x00001900 #define BNX2_RPM_RC_CNTL_0_OFFSET (0xffL<<0) #define BNX2_RPM_RC_CNTL_0_CLASS (0x7L<<8) @@ -1984,14 +3333,18 @@ struct l2_fhdr { #define BNX2_RPM_RC_CNTL_0_HDR_TYPE_TCP (2L<<13) #define BNX2_RPM_RC_CNTL_0_HDR_TYPE_UDP (3L<<13) #define BNX2_RPM_RC_CNTL_0_HDR_TYPE_DATA (4L<<13) +#define BNX2_RPM_RC_CNTL_0_HDR_TYPE_TCP_UDP (5L<<13) +#define BNX2_RPM_RC_CNTL_0_HDR_TYPE_ICMPV6 (6L<<13) #define BNX2_RPM_RC_CNTL_0_COMP (0x3L<<16) #define BNX2_RPM_RC_CNTL_0_COMP_EQUAL (0L<<16) #define BNX2_RPM_RC_CNTL_0_COMP_NEQUAL (1L<<16) #define BNX2_RPM_RC_CNTL_0_COMP_GREATER (2L<<16) #define BNX2_RPM_RC_CNTL_0_COMP_LESS (3L<<16) +#define BNX2_RPM_RC_CNTL_0_MAP_XI (1L<<18) #define BNX2_RPM_RC_CNTL_0_SBIT (1L<<19) #define BNX2_RPM_RC_CNTL_0_CMDSEL (0xfL<<20) #define BNX2_RPM_RC_CNTL_0_MAP (1L<<24) +#define BNX2_RPM_RC_CNTL_0_CMDSEL_XI (0x1fL<<20) #define BNX2_RPM_RC_CNTL_0_DISCARD (1L<<25) #define BNX2_RPM_RC_CNTL_0_MASK (1L<<26) #define BNX2_RPM_RC_CNTL_0_P1 (1L<<27) @@ -2006,81 +3359,518 @@ struct l2_fhdr { #define BNX2_RPM_RC_CNTL_1 0x00001908 #define BNX2_RPM_RC_CNTL_1_A (0x3ffffL<<0) #define BNX2_RPM_RC_CNTL_1_B (0xfffL<<19) +#define BNX2_RPM_RC_CNTL_1_OFFSET_XI (0xffL<<0) +#define BNX2_RPM_RC_CNTL_1_CLASS_XI (0x7L<<8) +#define BNX2_RPM_RC_CNTL_1_PRIORITY_XI (1L<<11) +#define BNX2_RPM_RC_CNTL_1_P4_XI (1L<<12) +#define BNX2_RPM_RC_CNTL_1_HDR_TYPE_XI (0x7L<<13) +#define BNX2_RPM_RC_CNTL_1_HDR_TYPE_START_XI (0L<<13) +#define BNX2_RPM_RC_CNTL_1_HDR_TYPE_IP_XI (1L<<13) +#define BNX2_RPM_RC_CNTL_1_HDR_TYPE_TCP_XI (2L<<13) +#define BNX2_RPM_RC_CNTL_1_HDR_TYPE_UDP_XI (3L<<13) +#define BNX2_RPM_RC_CNTL_1_HDR_TYPE_DATA_XI (4L<<13) +#define BNX2_RPM_RC_CNTL_1_HDR_TYPE_TCP_UDP_XI (5L<<13) +#define BNX2_RPM_RC_CNTL_1_HDR_TYPE_ICMPV6_XI (6L<<13) +#define BNX2_RPM_RC_CNTL_1_COMP_XI (0x3L<<16) +#define BNX2_RPM_RC_CNTL_1_COMP_EQUAL_XI (0L<<16) +#define BNX2_RPM_RC_CNTL_1_COMP_NEQUAL_XI (1L<<16) +#define BNX2_RPM_RC_CNTL_1_COMP_GREATER_XI (2L<<16) +#define BNX2_RPM_RC_CNTL_1_COMP_LESS_XI (3L<<16) +#define BNX2_RPM_RC_CNTL_1_MAP_XI (1L<<18) +#define BNX2_RPM_RC_CNTL_1_SBIT_XI (1L<<19) +#define BNX2_RPM_RC_CNTL_1_CMDSEL_XI (0x1fL<<20) +#define BNX2_RPM_RC_CNTL_1_DISCARD_XI (1L<<25) +#define BNX2_RPM_RC_CNTL_1_MASK_XI (1L<<26) +#define BNX2_RPM_RC_CNTL_1_P1_XI (1L<<27) +#define BNX2_RPM_RC_CNTL_1_P2_XI (1L<<28) +#define BNX2_RPM_RC_CNTL_1_P3_XI (1L<<29) +#define BNX2_RPM_RC_CNTL_1_NBIT_XI (1L<<30) #define BNX2_RPM_RC_VALUE_MASK_1 0x0000190c +#define BNX2_RPM_RC_VALUE_MASK_1_VALUE (0xffffL<<0) +#define BNX2_RPM_RC_VALUE_MASK_1_MASK (0xffffL<<16) + #define BNX2_RPM_RC_CNTL_2 0x00001910 #define BNX2_RPM_RC_CNTL_2_A (0x3ffffL<<0) #define BNX2_RPM_RC_CNTL_2_B (0xfffL<<19) +#define BNX2_RPM_RC_CNTL_2_OFFSET_XI (0xffL<<0) +#define BNX2_RPM_RC_CNTL_2_CLASS_XI (0x7L<<8) +#define BNX2_RPM_RC_CNTL_2_PRIORITY_XI (1L<<11) +#define BNX2_RPM_RC_CNTL_2_P4_XI (1L<<12) +#define BNX2_RPM_RC_CNTL_2_HDR_TYPE_XI (0x7L<<13) +#define BNX2_RPM_RC_CNTL_2_HDR_TYPE_START_XI (0L<<13) +#define BNX2_RPM_RC_CNTL_2_HDR_TYPE_IP_XI (1L<<13) +#define BNX2_RPM_RC_CNTL_2_HDR_TYPE_TCP_XI (2L<<13) +#define BNX2_RPM_RC_CNTL_2_HDR_TYPE_UDP_XI (3L<<13) +#define BNX2_RPM_RC_CNTL_2_HDR_TYPE_DATA_XI (4L<<13) +#define BNX2_RPM_RC_CNTL_2_HDR_TYPE_TCP_UDP_XI (5L<<13) +#define BNX2_RPM_RC_CNTL_2_HDR_TYPE_ICMPV6_XI (6L<<13) +#define BNX2_RPM_RC_CNTL_2_COMP_XI (0x3L<<16) +#define BNX2_RPM_RC_CNTL_2_COMP_EQUAL_XI (0L<<16) +#define BNX2_RPM_RC_CNTL_2_COMP_NEQUAL_XI (1L<<16) +#define BNX2_RPM_RC_CNTL_2_COMP_GREATER_XI (2L<<16) +#define BNX2_RPM_RC_CNTL_2_COMP_LESS_XI (3L<<16) +#define BNX2_RPM_RC_CNTL_2_MAP_XI (1L<<18) +#define BNX2_RPM_RC_CNTL_2_SBIT_XI (1L<<19) +#define BNX2_RPM_RC_CNTL_2_CMDSEL_XI (0x1fL<<20) +#define BNX2_RPM_RC_CNTL_2_DISCARD_XI (1L<<25) +#define BNX2_RPM_RC_CNTL_2_MASK_XI (1L<<26) +#define BNX2_RPM_RC_CNTL_2_P1_XI (1L<<27) +#define BNX2_RPM_RC_CNTL_2_P2_XI (1L<<28) +#define BNX2_RPM_RC_CNTL_2_P3_XI (1L<<29) +#define BNX2_RPM_RC_CNTL_2_NBIT_XI (1L<<30) #define BNX2_RPM_RC_VALUE_MASK_2 0x00001914 +#define BNX2_RPM_RC_VALUE_MASK_2_VALUE (0xffffL<<0) +#define BNX2_RPM_RC_VALUE_MASK_2_MASK (0xffffL<<16) + #define BNX2_RPM_RC_CNTL_3 0x00001918 #define BNX2_RPM_RC_CNTL_3_A (0x3ffffL<<0) #define BNX2_RPM_RC_CNTL_3_B (0xfffL<<19) +#define BNX2_RPM_RC_CNTL_3_OFFSET_XI (0xffL<<0) +#define BNX2_RPM_RC_CNTL_3_CLASS_XI (0x7L<<8) +#define BNX2_RPM_RC_CNTL_3_PRIORITY_XI (1L<<11) +#define BNX2_RPM_RC_CNTL_3_P4_XI (1L<<12) +#define BNX2_RPM_RC_CNTL_3_HDR_TYPE_XI (0x7L<<13) +#define BNX2_RPM_RC_CNTL_3_HDR_TYPE_START_XI (0L<<13) +#define BNX2_RPM_RC_CNTL_3_HDR_TYPE_IP_XI (1L<<13) +#define BNX2_RPM_RC_CNTL_3_HDR_TYPE_TCP_XI (2L<<13) +#define BNX2_RPM_RC_CNTL_3_HDR_TYPE_UDP_XI (3L<<13) +#define BNX2_RPM_RC_CNTL_3_HDR_TYPE_DATA_XI (4L<<13) +#define BNX2_RPM_RC_CNTL_3_HDR_TYPE_TCP_UDP_XI (5L<<13) +#define BNX2_RPM_RC_CNTL_3_HDR_TYPE_ICMPV6_XI (6L<<13) +#define BNX2_RPM_RC_CNTL_3_COMP_XI (0x3L<<16) +#define BNX2_RPM_RC_CNTL_3_COMP_EQUAL_XI (0L<<16) +#define BNX2_RPM_RC_CNTL_3_COMP_NEQUAL_XI (1L<<16) +#define BNX2_RPM_RC_CNTL_3_COMP_GREATER_XI (2L<<16) +#define BNX2_RPM_RC_CNTL_3_COMP_LESS_XI (3L<<16) +#define BNX2_RPM_RC_CNTL_3_MAP_XI (1L<<18) +#define BNX2_RPM_RC_CNTL_3_SBIT_XI (1L<<19) +#define BNX2_RPM_RC_CNTL_3_CMDSEL_XI (0x1fL<<20) +#define BNX2_RPM_RC_CNTL_3_DISCARD_XI (1L<<25) +#define BNX2_RPM_RC_CNTL_3_MASK_XI (1L<<26) +#define BNX2_RPM_RC_CNTL_3_P1_XI (1L<<27) +#define BNX2_RPM_RC_CNTL_3_P2_XI (1L<<28) +#define BNX2_RPM_RC_CNTL_3_P3_XI (1L<<29) +#define BNX2_RPM_RC_CNTL_3_NBIT_XI (1L<<30) #define BNX2_RPM_RC_VALUE_MASK_3 0x0000191c +#define BNX2_RPM_RC_VALUE_MASK_3_VALUE (0xffffL<<0) +#define BNX2_RPM_RC_VALUE_MASK_3_MASK (0xffffL<<16) + #define BNX2_RPM_RC_CNTL_4 0x00001920 #define BNX2_RPM_RC_CNTL_4_A (0x3ffffL<<0) #define BNX2_RPM_RC_CNTL_4_B (0xfffL<<19) +#define BNX2_RPM_RC_CNTL_4_OFFSET_XI (0xffL<<0) +#define BNX2_RPM_RC_CNTL_4_CLASS_XI (0x7L<<8) +#define BNX2_RPM_RC_CNTL_4_PRIORITY_XI (1L<<11) +#define BNX2_RPM_RC_CNTL_4_P4_XI (1L<<12) +#define BNX2_RPM_RC_CNTL_4_HDR_TYPE_XI (0x7L<<13) +#define BNX2_RPM_RC_CNTL_4_HDR_TYPE_START_XI (0L<<13) +#define BNX2_RPM_RC_CNTL_4_HDR_TYPE_IP_XI (1L<<13) +#define BNX2_RPM_RC_CNTL_4_HDR_TYPE_TCP_XI (2L<<13) +#define BNX2_RPM_RC_CNTL_4_HDR_TYPE_UDP_XI (3L<<13) +#define BNX2_RPM_RC_CNTL_4_HDR_TYPE_DATA_XI (4L<<13) +#define BNX2_RPM_RC_CNTL_4_HDR_TYPE_TCP_UDP_XI (5L<<13) +#define BNX2_RPM_RC_CNTL_4_HDR_TYPE_ICMPV6_XI (6L<<13) +#define BNX2_RPM_RC_CNTL_4_COMP_XI (0x3L<<16) +#define BNX2_RPM_RC_CNTL_4_COMP_EQUAL_XI (0L<<16) +#define BNX2_RPM_RC_CNTL_4_COMP_NEQUAL_XI (1L<<16) +#define BNX2_RPM_RC_CNTL_4_COMP_GREATER_XI (2L<<16) +#define BNX2_RPM_RC_CNTL_4_COMP_LESS_XI (3L<<16) +#define BNX2_RPM_RC_CNTL_4_MAP_XI (1L<<18) +#define BNX2_RPM_RC_CNTL_4_SBIT_XI (1L<<19) +#define BNX2_RPM_RC_CNTL_4_CMDSEL_XI (0x1fL<<20) +#define BNX2_RPM_RC_CNTL_4_DISCARD_XI (1L<<25) +#define BNX2_RPM_RC_CNTL_4_MASK_XI (1L<<26) +#define BNX2_RPM_RC_CNTL_4_P1_XI (1L<<27) +#define BNX2_RPM_RC_CNTL_4_P2_XI (1L<<28) +#define BNX2_RPM_RC_CNTL_4_P3_XI (1L<<29) +#define BNX2_RPM_RC_CNTL_4_NBIT_XI (1L<<30) #define BNX2_RPM_RC_VALUE_MASK_4 0x00001924 +#define BNX2_RPM_RC_VALUE_MASK_4_VALUE (0xffffL<<0) +#define BNX2_RPM_RC_VALUE_MASK_4_MASK (0xffffL<<16) + #define BNX2_RPM_RC_CNTL_5 0x00001928 #define BNX2_RPM_RC_CNTL_5_A (0x3ffffL<<0) #define BNX2_RPM_RC_CNTL_5_B (0xfffL<<19) +#define BNX2_RPM_RC_CNTL_5_OFFSET_XI (0xffL<<0) +#define BNX2_RPM_RC_CNTL_5_CLASS_XI (0x7L<<8) +#define BNX2_RPM_RC_CNTL_5_PRIORITY_XI (1L<<11) +#define BNX2_RPM_RC_CNTL_5_P4_XI (1L<<12) +#define BNX2_RPM_RC_CNTL_5_HDR_TYPE_XI (0x7L<<13) +#define BNX2_RPM_RC_CNTL_5_HDR_TYPE_START_XI (0L<<13) +#define BNX2_RPM_RC_CNTL_5_HDR_TYPE_IP_XI (1L<<13) +#define BNX2_RPM_RC_CNTL_5_HDR_TYPE_TCP_XI (2L<<13) +#define BNX2_RPM_RC_CNTL_5_HDR_TYPE_UDP_XI (3L<<13) +#define BNX2_RPM_RC_CNTL_5_HDR_TYPE_DATA_XI (4L<<13) +#define BNX2_RPM_RC_CNTL_5_HDR_TYPE_TCP_UDP_XI (5L<<13) +#define BNX2_RPM_RC_CNTL_5_HDR_TYPE_ICMPV6_XI (6L<<13) +#define BNX2_RPM_RC_CNTL_5_COMP_XI (0x3L<<16) +#define BNX2_RPM_RC_CNTL_5_COMP_EQUAL_XI (0L<<16) +#define BNX2_RPM_RC_CNTL_5_COMP_NEQUAL_XI (1L<<16) +#define BNX2_RPM_RC_CNTL_5_COMP_GREATER_XI (2L<<16) +#define BNX2_RPM_RC_CNTL_5_COMP_LESS_XI (3L<<16) +#define BNX2_RPM_RC_CNTL_5_MAP_XI (1L<<18) +#define BNX2_RPM_RC_CNTL_5_SBIT_XI (1L<<19) +#define BNX2_RPM_RC_CNTL_5_CMDSEL_XI (0x1fL<<20) +#define BNX2_RPM_RC_CNTL_5_DISCARD_XI (1L<<25) +#define BNX2_RPM_RC_CNTL_5_MASK_XI (1L<<26) +#define BNX2_RPM_RC_CNTL_5_P1_XI (1L<<27) +#define BNX2_RPM_RC_CNTL_5_P2_XI (1L<<28) +#define BNX2_RPM_RC_CNTL_5_P3_XI (1L<<29) +#define BNX2_RPM_RC_CNTL_5_NBIT_XI (1L<<30) #define BNX2_RPM_RC_VALUE_MASK_5 0x0000192c +#define BNX2_RPM_RC_VALUE_MASK_5_VALUE (0xffffL<<0) +#define BNX2_RPM_RC_VALUE_MASK_5_MASK (0xffffL<<16) + #define BNX2_RPM_RC_CNTL_6 0x00001930 #define BNX2_RPM_RC_CNTL_6_A (0x3ffffL<<0) #define BNX2_RPM_RC_CNTL_6_B (0xfffL<<19) +#define BNX2_RPM_RC_CNTL_6_OFFSET_XI (0xffL<<0) +#define BNX2_RPM_RC_CNTL_6_CLASS_XI (0x7L<<8) +#define BNX2_RPM_RC_CNTL_6_PRIORITY_XI (1L<<11) +#define BNX2_RPM_RC_CNTL_6_P4_XI (1L<<12) +#define BNX2_RPM_RC_CNTL_6_HDR_TYPE_XI (0x7L<<13) +#define BNX2_RPM_RC_CNTL_6_HDR_TYPE_START_XI (0L<<13) +#define BNX2_RPM_RC_CNTL_6_HDR_TYPE_IP_XI (1L<<13) +#define BNX2_RPM_RC_CNTL_6_HDR_TYPE_TCP_XI (2L<<13) +#define BNX2_RPM_RC_CNTL_6_HDR_TYPE_UDP_XI (3L<<13) +#define BNX2_RPM_RC_CNTL_6_HDR_TYPE_DATA_XI (4L<<13) +#define BNX2_RPM_RC_CNTL_6_HDR_TYPE_TCP_UDP_XI (5L<<13) +#define BNX2_RPM_RC_CNTL_6_HDR_TYPE_ICMPV6_XI (6L<<13) +#define BNX2_RPM_RC_CNTL_6_COMP_XI (0x3L<<16) +#define BNX2_RPM_RC_CNTL_6_COMP_EQUAL_XI (0L<<16) +#define BNX2_RPM_RC_CNTL_6_COMP_NEQUAL_XI (1L<<16) +#define BNX2_RPM_RC_CNTL_6_COMP_GREATER_XI (2L<<16) +#define BNX2_RPM_RC_CNTL_6_COMP_LESS_XI (3L<<16) +#define BNX2_RPM_RC_CNTL_6_MAP_XI (1L<<18) +#define BNX2_RPM_RC_CNTL_6_SBIT_XI (1L<<19) +#define BNX2_RPM_RC_CNTL_6_CMDSEL_XI (0x1fL<<20) +#define BNX2_RPM_RC_CNTL_6_DISCARD_XI (1L<<25) +#define BNX2_RPM_RC_CNTL_6_MASK_XI (1L<<26) +#define BNX2_RPM_RC_CNTL_6_P1_XI (1L<<27) +#define BNX2_RPM_RC_CNTL_6_P2_XI (1L<<28) +#define BNX2_RPM_RC_CNTL_6_P3_XI (1L<<29) +#define BNX2_RPM_RC_CNTL_6_NBIT_XI (1L<<30) #define BNX2_RPM_RC_VALUE_MASK_6 0x00001934 +#define BNX2_RPM_RC_VALUE_MASK_6_VALUE (0xffffL<<0) +#define BNX2_RPM_RC_VALUE_MASK_6_MASK (0xffffL<<16) + #define BNX2_RPM_RC_CNTL_7 0x00001938 #define BNX2_RPM_RC_CNTL_7_A (0x3ffffL<<0) #define BNX2_RPM_RC_CNTL_7_B (0xfffL<<19) +#define BNX2_RPM_RC_CNTL_7_OFFSET_XI (0xffL<<0) +#define BNX2_RPM_RC_CNTL_7_CLASS_XI (0x7L<<8) +#define BNX2_RPM_RC_CNTL_7_PRIORITY_XI (1L<<11) +#define BNX2_RPM_RC_CNTL_7_P4_XI (1L<<12) +#define BNX2_RPM_RC_CNTL_7_HDR_TYPE_XI (0x7L<<13) +#define BNX2_RPM_RC_CNTL_7_HDR_TYPE_START_XI (0L<<13) +#define BNX2_RPM_RC_CNTL_7_HDR_TYPE_IP_XI (1L<<13) +#define BNX2_RPM_RC_CNTL_7_HDR_TYPE_TCP_XI (2L<<13) +#define BNX2_RPM_RC_CNTL_7_HDR_TYPE_UDP_XI (3L<<13) +#define BNX2_RPM_RC_CNTL_7_HDR_TYPE_DATA_XI (4L<<13) +#define BNX2_RPM_RC_CNTL_7_HDR_TYPE_TCP_UDP_XI (5L<<13) +#define BNX2_RPM_RC_CNTL_7_HDR_TYPE_ICMPV6_XI (6L<<13) +#define BNX2_RPM_RC_CNTL_7_COMP_XI (0x3L<<16) +#define BNX2_RPM_RC_CNTL_7_COMP_EQUAL_XI (0L<<16) +#define BNX2_RPM_RC_CNTL_7_COMP_NEQUAL_XI (1L<<16) +#define BNX2_RPM_RC_CNTL_7_COMP_GREATER_XI (2L<<16) +#define BNX2_RPM_RC_CNTL_7_COMP_LESS_XI (3L<<16) +#define BNX2_RPM_RC_CNTL_7_MAP_XI (1L<<18) +#define BNX2_RPM_RC_CNTL_7_SBIT_XI (1L<<19) +#define BNX2_RPM_RC_CNTL_7_CMDSEL_XI (0x1fL<<20) +#define BNX2_RPM_RC_CNTL_7_DISCARD_XI (1L<<25) +#define BNX2_RPM_RC_CNTL_7_MASK_XI (1L<<26) +#define BNX2_RPM_RC_CNTL_7_P1_XI (1L<<27) +#define BNX2_RPM_RC_CNTL_7_P2_XI (1L<<28) +#define BNX2_RPM_RC_CNTL_7_P3_XI (1L<<29) +#define BNX2_RPM_RC_CNTL_7_NBIT_XI (1L<<30) #define BNX2_RPM_RC_VALUE_MASK_7 0x0000193c +#define BNX2_RPM_RC_VALUE_MASK_7_VALUE (0xffffL<<0) +#define BNX2_RPM_RC_VALUE_MASK_7_MASK (0xffffL<<16) + #define BNX2_RPM_RC_CNTL_8 0x00001940 #define BNX2_RPM_RC_CNTL_8_A (0x3ffffL<<0) #define BNX2_RPM_RC_CNTL_8_B (0xfffL<<19) +#define BNX2_RPM_RC_CNTL_8_OFFSET_XI (0xffL<<0) +#define BNX2_RPM_RC_CNTL_8_CLASS_XI (0x7L<<8) +#define BNX2_RPM_RC_CNTL_8_PRIORITY_XI (1L<<11) +#define BNX2_RPM_RC_CNTL_8_P4_XI (1L<<12) +#define BNX2_RPM_RC_CNTL_8_HDR_TYPE_XI (0x7L<<13) +#define BNX2_RPM_RC_CNTL_8_HDR_TYPE_START_XI (0L<<13) +#define BNX2_RPM_RC_CNTL_8_HDR_TYPE_IP_XI (1L<<13) +#define BNX2_RPM_RC_CNTL_8_HDR_TYPE_TCP_XI (2L<<13) +#define BNX2_RPM_RC_CNTL_8_HDR_TYPE_UDP_XI (3L<<13) +#define BNX2_RPM_RC_CNTL_8_HDR_TYPE_DATA_XI (4L<<13) +#define BNX2_RPM_RC_CNTL_8_HDR_TYPE_TCP_UDP_XI (5L<<13) +#define BNX2_RPM_RC_CNTL_8_HDR_TYPE_ICMPV6_XI (6L<<13) +#define BNX2_RPM_RC_CNTL_8_COMP_XI (0x3L<<16) +#define BNX2_RPM_RC_CNTL_8_COMP_EQUAL_XI (0L<<16) +#define BNX2_RPM_RC_CNTL_8_COMP_NEQUAL_XI (1L<<16) +#define BNX2_RPM_RC_CNTL_8_COMP_GREATER_XI (2L<<16) +#define BNX2_RPM_RC_CNTL_8_COMP_LESS_XI (3L<<16) +#define BNX2_RPM_RC_CNTL_8_MAP_XI (1L<<18) +#define BNX2_RPM_RC_CNTL_8_SBIT_XI (1L<<19) +#define BNX2_RPM_RC_CNTL_8_CMDSEL_XI (0x1fL<<20) +#define BNX2_RPM_RC_CNTL_8_DISCARD_XI (1L<<25) +#define BNX2_RPM_RC_CNTL_8_MASK_XI (1L<<26) +#define BNX2_RPM_RC_CNTL_8_P1_XI (1L<<27) +#define BNX2_RPM_RC_CNTL_8_P2_XI (1L<<28) +#define BNX2_RPM_RC_CNTL_8_P3_XI (1L<<29) +#define BNX2_RPM_RC_CNTL_8_NBIT_XI (1L<<30) #define BNX2_RPM_RC_VALUE_MASK_8 0x00001944 +#define BNX2_RPM_RC_VALUE_MASK_8_VALUE (0xffffL<<0) +#define BNX2_RPM_RC_VALUE_MASK_8_MASK (0xffffL<<16) + #define BNX2_RPM_RC_CNTL_9 0x00001948 #define BNX2_RPM_RC_CNTL_9_A (0x3ffffL<<0) #define BNX2_RPM_RC_CNTL_9_B (0xfffL<<19) +#define BNX2_RPM_RC_CNTL_9_OFFSET_XI (0xffL<<0) +#define BNX2_RPM_RC_CNTL_9_CLASS_XI (0x7L<<8) +#define BNX2_RPM_RC_CNTL_9_PRIORITY_XI (1L<<11) +#define BNX2_RPM_RC_CNTL_9_P4_XI (1L<<12) +#define BNX2_RPM_RC_CNTL_9_HDR_TYPE_XI (0x7L<<13) +#define BNX2_RPM_RC_CNTL_9_HDR_TYPE_START_XI (0L<<13) +#define BNX2_RPM_RC_CNTL_9_HDR_TYPE_IP_XI (1L<<13) +#define BNX2_RPM_RC_CNTL_9_HDR_TYPE_TCP_XI (2L<<13) +#define BNX2_RPM_RC_CNTL_9_HDR_TYPE_UDP_XI (3L<<13) +#define BNX2_RPM_RC_CNTL_9_HDR_TYPE_DATA_XI (4L<<13) +#define BNX2_RPM_RC_CNTL_9_HDR_TYPE_TCP_UDP_XI (5L<<13) +#define BNX2_RPM_RC_CNTL_9_HDR_TYPE_ICMPV6_XI (6L<<13) +#define BNX2_RPM_RC_CNTL_9_COMP_XI (0x3L<<16) +#define BNX2_RPM_RC_CNTL_9_COMP_EQUAL_XI (0L<<16) +#define BNX2_RPM_RC_CNTL_9_COMP_NEQUAL_XI (1L<<16) +#define BNX2_RPM_RC_CNTL_9_COMP_GREATER_XI (2L<<16) +#define BNX2_RPM_RC_CNTL_9_COMP_LESS_XI (3L<<16) +#define BNX2_RPM_RC_CNTL_9_MAP_XI (1L<<18) +#define BNX2_RPM_RC_CNTL_9_SBIT_XI (1L<<19) +#define BNX2_RPM_RC_CNTL_9_CMDSEL_XI (0x1fL<<20) +#define BNX2_RPM_RC_CNTL_9_DISCARD_XI (1L<<25) +#define BNX2_RPM_RC_CNTL_9_MASK_XI (1L<<26) +#define BNX2_RPM_RC_CNTL_9_P1_XI (1L<<27) +#define BNX2_RPM_RC_CNTL_9_P2_XI (1L<<28) +#define BNX2_RPM_RC_CNTL_9_P3_XI (1L<<29) +#define BNX2_RPM_RC_CNTL_9_NBIT_XI (1L<<30) #define BNX2_RPM_RC_VALUE_MASK_9 0x0000194c +#define BNX2_RPM_RC_VALUE_MASK_9_VALUE (0xffffL<<0) +#define BNX2_RPM_RC_VALUE_MASK_9_MASK (0xffffL<<16) + #define BNX2_RPM_RC_CNTL_10 0x00001950 #define BNX2_RPM_RC_CNTL_10_A (0x3ffffL<<0) #define BNX2_RPM_RC_CNTL_10_B (0xfffL<<19) +#define BNX2_RPM_RC_CNTL_10_OFFSET_XI (0xffL<<0) +#define BNX2_RPM_RC_CNTL_10_CLASS_XI (0x7L<<8) +#define BNX2_RPM_RC_CNTL_10_PRIORITY_XI (1L<<11) +#define BNX2_RPM_RC_CNTL_10_P4_XI (1L<<12) +#define BNX2_RPM_RC_CNTL_10_HDR_TYPE_XI (0x7L<<13) +#define BNX2_RPM_RC_CNTL_10_HDR_TYPE_START_XI (0L<<13) +#define BNX2_RPM_RC_CNTL_10_HDR_TYPE_IP_XI (1L<<13) +#define BNX2_RPM_RC_CNTL_10_HDR_TYPE_TCP_XI (2L<<13) +#define BNX2_RPM_RC_CNTL_10_HDR_TYPE_UDP_XI (3L<<13) +#define BNX2_RPM_RC_CNTL_10_HDR_TYPE_DATA_XI (4L<<13) +#define BNX2_RPM_RC_CNTL_10_HDR_TYPE_TCP_UDP_XI (5L<<13) +#define BNX2_RPM_RC_CNTL_10_HDR_TYPE_ICMPV6_XI (6L<<13) +#define BNX2_RPM_RC_CNTL_10_COMP_XI (0x3L<<16) +#define BNX2_RPM_RC_CNTL_10_COMP_EQUAL_XI (0L<<16) +#define BNX2_RPM_RC_CNTL_10_COMP_NEQUAL_XI (1L<<16) +#define BNX2_RPM_RC_CNTL_10_COMP_GREATER_XI (2L<<16) +#define BNX2_RPM_RC_CNTL_10_COMP_LESS_XI (3L<<16) +#define BNX2_RPM_RC_CNTL_10_MAP_XI (1L<<18) +#define BNX2_RPM_RC_CNTL_10_SBIT_XI (1L<<19) +#define BNX2_RPM_RC_CNTL_10_CMDSEL_XI (0x1fL<<20) +#define BNX2_RPM_RC_CNTL_10_DISCARD_XI (1L<<25) +#define BNX2_RPM_RC_CNTL_10_MASK_XI (1L<<26) +#define BNX2_RPM_RC_CNTL_10_P1_XI (1L<<27) +#define BNX2_RPM_RC_CNTL_10_P2_XI (1L<<28) +#define BNX2_RPM_RC_CNTL_10_P3_XI (1L<<29) +#define BNX2_RPM_RC_CNTL_10_NBIT_XI (1L<<30) #define BNX2_RPM_RC_VALUE_MASK_10 0x00001954 +#define BNX2_RPM_RC_VALUE_MASK_10_VALUE (0xffffL<<0) +#define BNX2_RPM_RC_VALUE_MASK_10_MASK (0xffffL<<16) + #define BNX2_RPM_RC_CNTL_11 0x00001958 #define BNX2_RPM_RC_CNTL_11_A (0x3ffffL<<0) #define BNX2_RPM_RC_CNTL_11_B (0xfffL<<19) +#define BNX2_RPM_RC_CNTL_11_OFFSET_XI (0xffL<<0) +#define BNX2_RPM_RC_CNTL_11_CLASS_XI (0x7L<<8) +#define BNX2_RPM_RC_CNTL_11_PRIORITY_XI (1L<<11) +#define BNX2_RPM_RC_CNTL_11_P4_XI (1L<<12) +#define BNX2_RPM_RC_CNTL_11_HDR_TYPE_XI (0x7L<<13) +#define BNX2_RPM_RC_CNTL_11_HDR_TYPE_START_XI (0L<<13) +#define BNX2_RPM_RC_CNTL_11_HDR_TYPE_IP_XI (1L<<13) +#define BNX2_RPM_RC_CNTL_11_HDR_TYPE_TCP_XI (2L<<13) +#define BNX2_RPM_RC_CNTL_11_HDR_TYPE_UDP_XI (3L<<13) +#define BNX2_RPM_RC_CNTL_11_HDR_TYPE_DATA_XI (4L<<13) +#define BNX2_RPM_RC_CNTL_11_HDR_TYPE_TCP_UDP_XI (5L<<13) +#define BNX2_RPM_RC_CNTL_11_HDR_TYPE_ICMPV6_XI (6L<<13) +#define BNX2_RPM_RC_CNTL_11_COMP_XI (0x3L<<16) +#define BNX2_RPM_RC_CNTL_11_COMP_EQUAL_XI (0L<<16) +#define BNX2_RPM_RC_CNTL_11_COMP_NEQUAL_XI (1L<<16) +#define BNX2_RPM_RC_CNTL_11_COMP_GREATER_XI (2L<<16) +#define BNX2_RPM_RC_CNTL_11_COMP_LESS_XI (3L<<16) +#define BNX2_RPM_RC_CNTL_11_MAP_XI (1L<<18) +#define BNX2_RPM_RC_CNTL_11_SBIT_XI (1L<<19) +#define BNX2_RPM_RC_CNTL_11_CMDSEL_XI (0x1fL<<20) +#define BNX2_RPM_RC_CNTL_11_DISCARD_XI (1L<<25) +#define BNX2_RPM_RC_CNTL_11_MASK_XI (1L<<26) +#define BNX2_RPM_RC_CNTL_11_P1_XI (1L<<27) +#define BNX2_RPM_RC_CNTL_11_P2_XI (1L<<28) +#define BNX2_RPM_RC_CNTL_11_P3_XI (1L<<29) +#define BNX2_RPM_RC_CNTL_11_NBIT_XI (1L<<30) #define BNX2_RPM_RC_VALUE_MASK_11 0x0000195c +#define BNX2_RPM_RC_VALUE_MASK_11_VALUE (0xffffL<<0) +#define BNX2_RPM_RC_VALUE_MASK_11_MASK (0xffffL<<16) + #define BNX2_RPM_RC_CNTL_12 0x00001960 #define BNX2_RPM_RC_CNTL_12_A (0x3ffffL<<0) #define BNX2_RPM_RC_CNTL_12_B (0xfffL<<19) +#define BNX2_RPM_RC_CNTL_12_OFFSET_XI (0xffL<<0) +#define BNX2_RPM_RC_CNTL_12_CLASS_XI (0x7L<<8) +#define BNX2_RPM_RC_CNTL_12_PRIORITY_XI (1L<<11) +#define BNX2_RPM_RC_CNTL_12_P4_XI (1L<<12) +#define BNX2_RPM_RC_CNTL_12_HDR_TYPE_XI (0x7L<<13) +#define BNX2_RPM_RC_CNTL_12_HDR_TYPE_START_XI (0L<<13) +#define BNX2_RPM_RC_CNTL_12_HDR_TYPE_IP_XI (1L<<13) +#define BNX2_RPM_RC_CNTL_12_HDR_TYPE_TCP_XI (2L<<13) +#define BNX2_RPM_RC_CNTL_12_HDR_TYPE_UDP_XI (3L<<13) +#define BNX2_RPM_RC_CNTL_12_HDR_TYPE_DATA_XI (4L<<13) +#define BNX2_RPM_RC_CNTL_12_HDR_TYPE_TCP_UDP_XI (5L<<13) +#define BNX2_RPM_RC_CNTL_12_HDR_TYPE_ICMPV6_XI (6L<<13) +#define BNX2_RPM_RC_CNTL_12_COMP_XI (0x3L<<16) +#define BNX2_RPM_RC_CNTL_12_COMP_EQUAL_XI (0L<<16) +#define BNX2_RPM_RC_CNTL_12_COMP_NEQUAL_XI (1L<<16) +#define BNX2_RPM_RC_CNTL_12_COMP_GREATER_XI (2L<<16) +#define BNX2_RPM_RC_CNTL_12_COMP_LESS_XI (3L<<16) +#define BNX2_RPM_RC_CNTL_12_MAP_XI (1L<<18) +#define BNX2_RPM_RC_CNTL_12_SBIT_XI (1L<<19) +#define BNX2_RPM_RC_CNTL_12_CMDSEL_XI (0x1fL<<20) +#define BNX2_RPM_RC_CNTL_12_DISCARD_XI (1L<<25) +#define BNX2_RPM_RC_CNTL_12_MASK_XI (1L<<26) +#define BNX2_RPM_RC_CNTL_12_P1_XI (1L<<27) +#define BNX2_RPM_RC_CNTL_12_P2_XI (1L<<28) +#define BNX2_RPM_RC_CNTL_12_P3_XI (1L<<29) +#define BNX2_RPM_RC_CNTL_12_NBIT_XI (1L<<30) #define BNX2_RPM_RC_VALUE_MASK_12 0x00001964 +#define BNX2_RPM_RC_VALUE_MASK_12_VALUE (0xffffL<<0) +#define BNX2_RPM_RC_VALUE_MASK_12_MASK (0xffffL<<16) + #define BNX2_RPM_RC_CNTL_13 0x00001968 #define BNX2_RPM_RC_CNTL_13_A (0x3ffffL<<0) #define BNX2_RPM_RC_CNTL_13_B (0xfffL<<19) +#define BNX2_RPM_RC_CNTL_13_OFFSET_XI (0xffL<<0) +#define BNX2_RPM_RC_CNTL_13_CLASS_XI (0x7L<<8) +#define BNX2_RPM_RC_CNTL_13_PRIORITY_XI (1L<<11) +#define BNX2_RPM_RC_CNTL_13_P4_XI (1L<<12) +#define BNX2_RPM_RC_CNTL_13_HDR_TYPE_XI (0x7L<<13) +#define BNX2_RPM_RC_CNTL_13_HDR_TYPE_START_XI (0L<<13) +#define BNX2_RPM_RC_CNTL_13_HDR_TYPE_IP_XI (1L<<13) +#define BNX2_RPM_RC_CNTL_13_HDR_TYPE_TCP_XI (2L<<13) +#define BNX2_RPM_RC_CNTL_13_HDR_TYPE_UDP_XI (3L<<13) +#define BNX2_RPM_RC_CNTL_13_HDR_TYPE_DATA_XI (4L<<13) +#define BNX2_RPM_RC_CNTL_13_HDR_TYPE_TCP_UDP_XI (5L<<13) +#define BNX2_RPM_RC_CNTL_13_HDR_TYPE_ICMPV6_XI (6L<<13) +#define BNX2_RPM_RC_CNTL_13_COMP_XI (0x3L<<16) +#define BNX2_RPM_RC_CNTL_13_COMP_EQUAL_XI (0L<<16) +#define BNX2_RPM_RC_CNTL_13_COMP_NEQUAL_XI (1L<<16) +#define BNX2_RPM_RC_CNTL_13_COMP_GREATER_XI (2L<<16) +#define BNX2_RPM_RC_CNTL_13_COMP_LESS_XI (3L<<16) +#define BNX2_RPM_RC_CNTL_13_MAP_XI (1L<<18) +#define BNX2_RPM_RC_CNTL_13_SBIT_XI (1L<<19) +#define BNX2_RPM_RC_CNTL_13_CMDSEL_XI (0x1fL<<20) +#define BNX2_RPM_RC_CNTL_13_DISCARD_XI (1L<<25) +#define BNX2_RPM_RC_CNTL_13_MASK_XI (1L<<26) +#define BNX2_RPM_RC_CNTL_13_P1_XI (1L<<27) +#define BNX2_RPM_RC_CNTL_13_P2_XI (1L<<28) +#define BNX2_RPM_RC_CNTL_13_P3_XI (1L<<29) +#define BNX2_RPM_RC_CNTL_13_NBIT_XI (1L<<30) #define BNX2_RPM_RC_VALUE_MASK_13 0x0000196c +#define BNX2_RPM_RC_VALUE_MASK_13_VALUE (0xffffL<<0) +#define BNX2_RPM_RC_VALUE_MASK_13_MASK (0xffffL<<16) + #define BNX2_RPM_RC_CNTL_14 0x00001970 #define BNX2_RPM_RC_CNTL_14_A (0x3ffffL<<0) #define BNX2_RPM_RC_CNTL_14_B (0xfffL<<19) +#define BNX2_RPM_RC_CNTL_14_OFFSET_XI (0xffL<<0) +#define BNX2_RPM_RC_CNTL_14_CLASS_XI (0x7L<<8) +#define BNX2_RPM_RC_CNTL_14_PRIORITY_XI (1L<<11) +#define BNX2_RPM_RC_CNTL_14_P4_XI (1L<<12) +#define BNX2_RPM_RC_CNTL_14_HDR_TYPE_XI (0x7L<<13) +#define BNX2_RPM_RC_CNTL_14_HDR_TYPE_START_XI (0L<<13) +#define BNX2_RPM_RC_CNTL_14_HDR_TYPE_IP_XI (1L<<13) +#define BNX2_RPM_RC_CNTL_14_HDR_TYPE_TCP_XI (2L<<13) +#define BNX2_RPM_RC_CNTL_14_HDR_TYPE_UDP_XI (3L<<13) +#define BNX2_RPM_RC_CNTL_14_HDR_TYPE_DATA_XI (4L<<13) +#define BNX2_RPM_RC_CNTL_14_HDR_TYPE_TCP_UDP_XI (5L<<13) +#define BNX2_RPM_RC_CNTL_14_HDR_TYPE_ICMPV6_XI (6L<<13) +#define BNX2_RPM_RC_CNTL_14_COMP_XI (0x3L<<16) +#define BNX2_RPM_RC_CNTL_14_COMP_EQUAL_XI (0L<<16) +#define BNX2_RPM_RC_CNTL_14_COMP_NEQUAL_XI (1L<<16) +#define BNX2_RPM_RC_CNTL_14_COMP_GREATER_XI (2L<<16) +#define BNX2_RPM_RC_CNTL_14_COMP_LESS_XI (3L<<16) +#define BNX2_RPM_RC_CNTL_14_MAP_XI (1L<<18) +#define BNX2_RPM_RC_CNTL_14_SBIT_XI (1L<<19) +#define BNX2_RPM_RC_CNTL_14_CMDSEL_XI (0x1fL<<20) +#define BNX2_RPM_RC_CNTL_14_DISCARD_XI (1L<<25) +#define BNX2_RPM_RC_CNTL_14_MASK_XI (1L<<26) +#define BNX2_RPM_RC_CNTL_14_P1_XI (1L<<27) +#define BNX2_RPM_RC_CNTL_14_P2_XI (1L<<28) +#define BNX2_RPM_RC_CNTL_14_P3_XI (1L<<29) +#define BNX2_RPM_RC_CNTL_14_NBIT_XI (1L<<30) #define BNX2_RPM_RC_VALUE_MASK_14 0x00001974 +#define BNX2_RPM_RC_VALUE_MASK_14_VALUE (0xffffL<<0) +#define BNX2_RPM_RC_VALUE_MASK_14_MASK (0xffffL<<16) + #define BNX2_RPM_RC_CNTL_15 0x00001978 #define BNX2_RPM_RC_CNTL_15_A (0x3ffffL<<0) #define BNX2_RPM_RC_CNTL_15_B (0xfffL<<19) +#define BNX2_RPM_RC_CNTL_15_OFFSET_XI (0xffL<<0) +#define BNX2_RPM_RC_CNTL_15_CLASS_XI (0x7L<<8) +#define BNX2_RPM_RC_CNTL_15_PRIORITY_XI (1L<<11) +#define BNX2_RPM_RC_CNTL_15_P4_XI (1L<<12) +#define BNX2_RPM_RC_CNTL_15_HDR_TYPE_XI (0x7L<<13) +#define BNX2_RPM_RC_CNTL_15_HDR_TYPE_START_XI (0L<<13) +#define BNX2_RPM_RC_CNTL_15_HDR_TYPE_IP_XI (1L<<13) +#define BNX2_RPM_RC_CNTL_15_HDR_TYPE_TCP_XI (2L<<13) +#define BNX2_RPM_RC_CNTL_15_HDR_TYPE_UDP_XI (3L<<13) +#define BNX2_RPM_RC_CNTL_15_HDR_TYPE_DATA_XI (4L<<13) +#define BNX2_RPM_RC_CNTL_15_HDR_TYPE_TCP_UDP_XI (5L<<13) +#define BNX2_RPM_RC_CNTL_15_HDR_TYPE_ICMPV6_XI (6L<<13) +#define BNX2_RPM_RC_CNTL_15_COMP_XI (0x3L<<16) +#define BNX2_RPM_RC_CNTL_15_COMP_EQUAL_XI (0L<<16) +#define BNX2_RPM_RC_CNTL_15_COMP_NEQUAL_XI (1L<<16) +#define BNX2_RPM_RC_CNTL_15_COMP_GREATER_XI (2L<<16) +#define BNX2_RPM_RC_CNTL_15_COMP_LESS_XI (3L<<16) +#define BNX2_RPM_RC_CNTL_15_MAP_XI (1L<<18) +#define BNX2_RPM_RC_CNTL_15_SBIT_XI (1L<<19) +#define BNX2_RPM_RC_CNTL_15_CMDSEL_XI (0x1fL<<20) +#define BNX2_RPM_RC_CNTL_15_DISCARD_XI (1L<<25) +#define BNX2_RPM_RC_CNTL_15_MASK_XI (1L<<26) +#define BNX2_RPM_RC_CNTL_15_P1_XI (1L<<27) +#define BNX2_RPM_RC_CNTL_15_P2_XI (1L<<28) +#define BNX2_RPM_RC_CNTL_15_P3_XI (1L<<29) +#define BNX2_RPM_RC_CNTL_15_NBIT_XI (1L<<30) #define BNX2_RPM_RC_VALUE_MASK_15 0x0000197c +#define BNX2_RPM_RC_VALUE_MASK_15_VALUE (0xffffL<<0) +#define BNX2_RPM_RC_VALUE_MASK_15_MASK (0xffffL<<16) + #define BNX2_RPM_RC_CONFIG 0x00001980 #define BNX2_RPM_RC_CONFIG_RULE_ENABLE (0xffffL<<0) +#define BNX2_RPM_RC_CONFIG_RULE_ENABLE_XI (0xfffffL<<0) #define BNX2_RPM_RC_CONFIG_DEF_CLASS (0x7L<<24) +#define BNX2_RPM_RC_CONFIG_KNUM_OVERWRITE (1L<<31) #define BNX2_RPM_DEBUG0 0x00001984 #define BNX2_RPM_DEBUG0_FM_BCNT (0xffffL<<0) @@ -2236,6 +4026,16 @@ struct l2_fhdr { #define BNX2_RPM_DEBUG9_INFIFO_OVERRUN_OCCURRED (1L<<29) #define BNX2_RPM_DEBUG9_ACPI_MATCH_INT (1L<<30) #define BNX2_RPM_DEBUG9_ACPI_ENABLE_SYN (1L<<31) +#define BNX2_RPM_DEBUG9_BEMEM_R_XI (0x1fL<<0) +#define BNX2_RPM_DEBUG9_EO_XI (1L<<5) +#define BNX2_RPM_DEBUG9_AEOF_DE_XI (1L<<6) +#define BNX2_RPM_DEBUG9_SO_XI (1L<<7) +#define BNX2_RPM_DEBUG9_WD64_CT_XI (0x1fL<<8) +#define BNX2_RPM_DEBUG9_EOF_VLDBYTE_XI (0x7L<<13) +#define BNX2_RPM_DEBUG9_ACPI_RDE_PAT_ID_XI (0xfL<<16) +#define BNX2_RPM_DEBUG9_CALCRC_RESULT_XI (0x3ffL<<20) +#define BNX2_RPM_DEBUG9_DATA_IN_VL_XI (1L<<30) +#define BNX2_RPM_DEBUG9_CALCRC_BUFFER_VLD_XI (1L<<31) #define BNX2_RPM_ACPI_DBG_BUF_W00 0x000019c0 #define BNX2_RPM_ACPI_DBG_BUF_W01 0x000019c4 @@ -2253,6 +4053,56 @@ struct l2_fhdr { #define BNX2_RPM_ACPI_DBG_BUF_W31 0x000019f4 #define BNX2_RPM_ACPI_DBG_BUF_W32 0x000019f8 #define BNX2_RPM_ACPI_DBG_BUF_W33 0x000019fc +#define BNX2_RPM_ACPI_BYTE_ENABLE_CTRL 0x00001a00 +#define BNX2_RPM_ACPI_BYTE_ENABLE_CTRL_BYTE_ADDRESS (0xffffL<<0) +#define BNX2_RPM_ACPI_BYTE_ENABLE_CTRL_DEBUGRD (1L<<28) +#define BNX2_RPM_ACPI_BYTE_ENABLE_CTRL_MODE (1L<<29) +#define BNX2_RPM_ACPI_BYTE_ENABLE_CTRL_INIT (1L<<30) +#define BNX2_RPM_ACPI_BYTE_ENABLE_CTRL_WR (1L<<31) + +#define BNX2_RPM_ACPI_PATTERN_CTRL 0x00001a04 +#define BNX2_RPM_ACPI_PATTERN_CTRL_PATTERN_ID (0xfL<<0) +#define BNX2_RPM_ACPI_PATTERN_CTRL_CRC_SM_CLR (1L<<30) +#define BNX2_RPM_ACPI_PATTERN_CTRL_WR (1L<<31) + +#define BNX2_RPM_ACPI_DATA 0x00001a08 +#define BNX2_RPM_ACPI_DATA_PATTERN_BE (0xffffffffL<<0) + +#define BNX2_RPM_ACPI_PATTERN_LEN0 0x00001a0c +#define BNX2_RPM_ACPI_PATTERN_LEN0_PATTERN_LEN3 (0xffL<<0) +#define BNX2_RPM_ACPI_PATTERN_LEN0_PATTERN_LEN2 (0xffL<<8) +#define BNX2_RPM_ACPI_PATTERN_LEN0_PATTERN_LEN1 (0xffL<<16) +#define BNX2_RPM_ACPI_PATTERN_LEN0_PATTERN_LEN0 (0xffL<<24) + +#define BNX2_RPM_ACPI_PATTERN_LEN1 0x00001a10 +#define BNX2_RPM_ACPI_PATTERN_LEN1_PATTERN_LEN7 (0xffL<<0) +#define BNX2_RPM_ACPI_PATTERN_LEN1_PATTERN_LEN6 (0xffL<<8) +#define BNX2_RPM_ACPI_PATTERN_LEN1_PATTERN_LEN5 (0xffL<<16) +#define BNX2_RPM_ACPI_PATTERN_LEN1_PATTERN_LEN4 (0xffL<<24) + +#define BNX2_RPM_ACPI_PATTERN_CRC0 0x00001a18 +#define BNX2_RPM_ACPI_PATTERN_CRC0_PATTERN_CRC0 (0xffffffffL<<0) + +#define BNX2_RPM_ACPI_PATTERN_CRC1 0x00001a1c +#define BNX2_RPM_ACPI_PATTERN_CRC1_PATTERN_CRC1 (0xffffffffL<<0) + +#define BNX2_RPM_ACPI_PATTERN_CRC2 0x00001a20 +#define BNX2_RPM_ACPI_PATTERN_CRC2_PATTERN_CRC2 (0xffffffffL<<0) + +#define BNX2_RPM_ACPI_PATTERN_CRC3 0x00001a24 +#define BNX2_RPM_ACPI_PATTERN_CRC3_PATTERN_CRC3 (0xffffffffL<<0) + +#define BNX2_RPM_ACPI_PATTERN_CRC4 0x00001a28 +#define BNX2_RPM_ACPI_PATTERN_CRC4_PATTERN_CRC4 (0xffffffffL<<0) + +#define BNX2_RPM_ACPI_PATTERN_CRC5 0x00001a2c +#define BNX2_RPM_ACPI_PATTERN_CRC5_PATTERN_CRC5 (0xffffffffL<<0) + +#define BNX2_RPM_ACPI_PATTERN_CRC6 0x00001a30 +#define BNX2_RPM_ACPI_PATTERN_CRC6_PATTERN_CRC6 (0xffffffffL<<0) + +#define BNX2_RPM_ACPI_PATTERN_CRC7 0x00001a34 +#define BNX2_RPM_ACPI_PATTERN_CRC7_PATTERN_CRC7 (0xffffffffL<<0) /* @@ -2263,15 +4113,20 @@ struct l2_fhdr { #define BNX2_RBUF_COMMAND_ENABLED (1L<<0) #define BNX2_RBUF_COMMAND_FREE_INIT (1L<<1) #define BNX2_RBUF_COMMAND_RAM_INIT (1L<<2) +#define BNX2_RBUF_COMMAND_PKT_OFFSET_OVFL (1L<<3) #define BNX2_RBUF_COMMAND_OVER_FREE (1L<<4) #define BNX2_RBUF_COMMAND_ALLOC_REQ (1L<<5) +#define BNX2_RBUF_COMMAND_EN_PRI_CHNGE_TE (1L<<6) +#define BNX2_RBUF_COMMAND_CU_ISOLATE_XI (1L<<5) +#define BNX2_RBUF_COMMAND_EN_PRI_CHANGE_XI (1L<<6) +#define BNX2_RBUF_COMMAND_GRC_ENDIAN_CONV_DIS_XI (1L<<7) #define BNX2_RBUF_STATUS1 0x00200004 #define BNX2_RBUF_STATUS1_FREE_COUNT (0x3ffL<<0) #define BNX2_RBUF_STATUS2 0x00200008 -#define BNX2_RBUF_STATUS2_FREE_TAIL (0x3ffL<<0) -#define BNX2_RBUF_STATUS2_FREE_HEAD (0x3ffL<<16) +#define BNX2_RBUF_STATUS2_FREE_TAIL (0x1ffL<<0) +#define BNX2_RBUF_STATUS2_FREE_HEAD (0x1ffL<<16) #define BNX2_RBUF_CONFIG 0x0020000c #define BNX2_RBUF_CONFIG_XOFF_TRIP (0x3ffL<<0) @@ -2279,16 +4134,21 @@ struct l2_fhdr { #define BNX2_RBUF_FW_BUF_ALLOC 0x00200010 #define BNX2_RBUF_FW_BUF_ALLOC_VALUE (0x1ffL<<7) +#define BNX2_RBUF_FW_BUF_ALLOC_TYPE (1L<<16) +#define BNX2_RBUF_FW_BUF_ALLOC_ALLOC_REQ (1L<<31) #define BNX2_RBUF_FW_BUF_FREE 0x00200014 #define BNX2_RBUF_FW_BUF_FREE_COUNT (0x7fL<<0) #define BNX2_RBUF_FW_BUF_FREE_TAIL (0x1ffL<<7) #define BNX2_RBUF_FW_BUF_FREE_HEAD (0x1ffL<<16) +#define BNX2_RBUF_FW_BUF_FREE_TYPE (1L<<25) +#define BNX2_RBUF_FW_BUF_FREE_FREE_REQ (1L<<31) #define BNX2_RBUF_FW_BUF_SEL 0x00200018 #define BNX2_RBUF_FW_BUF_SEL_COUNT (0x7fL<<0) #define BNX2_RBUF_FW_BUF_SEL_TAIL (0x1ffL<<7) #define BNX2_RBUF_FW_BUF_SEL_HEAD (0x1ffL<<16) +#define BNX2_RBUF_FW_BUF_SEL_SEL_REQ (1L<<31) #define BNX2_RBUF_CONFIG2 0x0020001c #define BNX2_RBUF_CONFIG2_MAC_DROP_TRIP (0x3ffL<<0) @@ -2376,6 +4236,8 @@ struct l2_fhdr { #define BNX2_RV2P_INSTR_HIGH_HIGH (0x1fL<<0) #define BNX2_RV2P_INSTR_LOW 0x00002834 +#define BNX2_RV2P_INSTR_LOW_LOW (0xffffffffL<<0) + #define BNX2_RV2P_PROC1_ADDR_CMD 0x00002838 #define BNX2_RV2P_PROC1_ADDR_CMD_ADD (0x3ffL<<0) #define BNX2_RV2P_PROC1_ADDR_CMD_RDWR (1L<<31) @@ -2395,7 +4257,29 @@ struct l2_fhdr { #define BNX2_RV2P_DEBUG_VECT_PEEK_2_PEEK_EN (1L<<27) #define BNX2_RV2P_DEBUG_VECT_PEEK_2_SEL (0xfL<<28) -#define BNX2_RV2P_PFTQ_DATA 0x00002b40 +#define BNX2_RV2P_MPFE_PFE_CTL 0x00002afc +#define BNX2_RV2P_MPFE_PFE_CTL_INC_USAGE_CNT (1L<<0) +#define BNX2_RV2P_MPFE_PFE_CTL_PFE_SIZE (0xfL<<4) +#define BNX2_RV2P_MPFE_PFE_CTL_PFE_SIZE_0 (0L<<4) +#define BNX2_RV2P_MPFE_PFE_CTL_PFE_SIZE_1 (1L<<4) +#define BNX2_RV2P_MPFE_PFE_CTL_PFE_SIZE_2 (2L<<4) +#define BNX2_RV2P_MPFE_PFE_CTL_PFE_SIZE_3 (3L<<4) +#define BNX2_RV2P_MPFE_PFE_CTL_PFE_SIZE_4 (4L<<4) +#define BNX2_RV2P_MPFE_PFE_CTL_PFE_SIZE_5 (5L<<4) +#define BNX2_RV2P_MPFE_PFE_CTL_PFE_SIZE_6 (6L<<4) +#define BNX2_RV2P_MPFE_PFE_CTL_PFE_SIZE_7 (7L<<4) +#define BNX2_RV2P_MPFE_PFE_CTL_PFE_SIZE_8 (8L<<4) +#define BNX2_RV2P_MPFE_PFE_CTL_PFE_SIZE_9 (9L<<4) +#define BNX2_RV2P_MPFE_PFE_CTL_PFE_SIZE_10 (10L<<4) +#define BNX2_RV2P_MPFE_PFE_CTL_PFE_SIZE_11 (11L<<4) +#define BNX2_RV2P_MPFE_PFE_CTL_PFE_SIZE_12 (12L<<4) +#define BNX2_RV2P_MPFE_PFE_CTL_PFE_SIZE_13 (13L<<4) +#define BNX2_RV2P_MPFE_PFE_CTL_PFE_SIZE_14 (14L<<4) +#define BNX2_RV2P_MPFE_PFE_CTL_PFE_SIZE_15 (15L<<4) +#define BNX2_RV2P_MPFE_PFE_CTL_PFE_COUNT (0xfL<<12) +#define BNX2_RV2P_MPFE_PFE_CTL_OFFSET (0x1ffL<<16) + +#define BNX2_RV2P_RV2PPQ 0x00002b40 #define BNX2_RV2P_PFTQ_CMD 0x00002b78 #define BNX2_RV2P_PFTQ_CMD_OFFSET (0x3ffL<<0) #define BNX2_RV2P_PFTQ_CMD_WR_TOP (1L<<10) @@ -2416,7 +4300,7 @@ struct l2_fhdr { #define BNX2_RV2P_PFTQ_CTL_MAX_DEPTH (0x3ffL<<12) #define BNX2_RV2P_PFTQ_CTL_CUR_DEPTH (0x3ffL<<22) -#define BNX2_RV2P_TFTQ_DATA 0x00002b80 +#define BNX2_RV2P_RV2PTQ 0x00002b80 #define BNX2_RV2P_TFTQ_CMD 0x00002bb8 #define BNX2_RV2P_TFTQ_CMD_OFFSET (0x3ffL<<0) #define BNX2_RV2P_TFTQ_CMD_WR_TOP (1L<<10) @@ -2437,7 +4321,7 @@ struct l2_fhdr { #define BNX2_RV2P_TFTQ_CTL_MAX_DEPTH (0x3ffL<<12) #define BNX2_RV2P_TFTQ_CTL_CUR_DEPTH (0x3ffL<<22) -#define BNX2_RV2P_MFTQ_DATA 0x00002bc0 +#define BNX2_RV2P_RV2PMQ 0x00002bc0 #define BNX2_RV2P_MFTQ_CMD 0x00002bf8 #define BNX2_RV2P_MFTQ_CMD_OFFSET (0x3ffL<<0) #define BNX2_RV2P_MFTQ_CMD_WR_TOP (1L<<10) @@ -2466,18 +4350,26 @@ struct l2_fhdr { */ #define BNX2_MQ_COMMAND 0x00003c00 #define BNX2_MQ_COMMAND_ENABLED (1L<<0) +#define BNX2_MQ_COMMAND_INIT (1L<<1) #define BNX2_MQ_COMMAND_OVERFLOW (1L<<4) #define BNX2_MQ_COMMAND_WR_ERROR (1L<<5) #define BNX2_MQ_COMMAND_RD_ERROR (1L<<6) +#define BNX2_MQ_COMMAND_IDB_CFG_ERROR (1L<<7) +#define BNX2_MQ_COMMAND_IDB_OVERFLOW (1L<<10) +#define BNX2_MQ_COMMAND_NO_BIN_ERROR (1L<<11) +#define BNX2_MQ_COMMAND_NO_MAP_ERROR (1L<<12) #define BNX2_MQ_STATUS 0x00003c04 #define BNX2_MQ_STATUS_CTX_ACCESS_STAT (1L<<16) #define BNX2_MQ_STATUS_CTX_ACCESS64_STAT (1L<<17) #define BNX2_MQ_STATUS_PCI_STALL_STAT (1L<<18) +#define BNX2_MQ_STATUS_IDB_OFLOW_STAT (1L<<19) #define BNX2_MQ_CONFIG 0x00003c08 #define BNX2_MQ_CONFIG_TX_HIGH_PRI (1L<<0) #define BNX2_MQ_CONFIG_HALT_DIS (1L<<1) +#define BNX2_MQ_CONFIG_BIN_MQ_MODE (1L<<2) +#define BNX2_MQ_CONFIG_DIS_IDB_DROP (1L<<3) #define BNX2_MQ_CONFIG_KNL_BYP_BLK_SIZE (0x7L<<4) #define BNX2_MQ_CONFIG_KNL_BYP_BLK_SIZE_256 (0L<<4) #define BNX2_MQ_CONFIG_KNL_BYP_BLK_SIZE_512 (1L<<4) @@ -2533,6 +4425,7 @@ struct l2_fhdr { #define BNX2_MQ_MEM_WR_DATA2 0x00003c80 #define BNX2_MQ_MEM_WR_DATA2_VALUE (0x3fffffffL<<0) +#define BNX2_MQ_MEM_WR_DATA2_VALUE_XI (0x7fffffffL<<0) #define BNX2_MQ_MEM_RD_ADDR 0x00003c84 #define BNX2_MQ_MEM_RD_ADDR_VALUE (0x3fL<<0) @@ -2545,6 +4438,16 @@ struct l2_fhdr { #define BNX2_MQ_MEM_RD_DATA2 0x00003c90 #define BNX2_MQ_MEM_RD_DATA2_VALUE (0x3fffffffL<<0) +#define BNX2_MQ_MEM_RD_DATA2_VALUE_XI (0x7fffffffL<<0) + + +/* + * tsch_reg definition + * offset: 0x4c00 + */ +#define BNX2_TSCH_TSS_CFG 0x00004c1c +#define BNX2_TSCH_TSS_CFG_TSS_START_CID (0x7ffL<<8) +#define BNX2_TSCH_TSS_CFG_NUM_OF_TSS_CON (0xfL<<24) @@ -2594,7 +4497,11 @@ struct l2_fhdr { #define BNX2_TBDR_DEBUG_VECT_PEEK_2_PEEK_EN (1L<<27) #define BNX2_TBDR_DEBUG_VECT_PEEK_2_SEL (0xfL<<28) -#define BNX2_TBDR_FTQ_DATA 0x000053c0 +#define BNX2_TBDR_CKSUM_ERROR_STATUS 0x00005010 +#define BNX2_TBDR_CKSUM_ERROR_STATUS_CALCULATED (0xffffL<<0) +#define BNX2_TBDR_CKSUM_ERROR_STATUS_EXPECTED (0xffffL<<16) + +#define BNX2_TBDR_TBDRQ 0x000053c0 #define BNX2_TBDR_FTQ_CMD 0x000053f8 #define BNX2_TBDR_FTQ_CMD_OFFSET (0x3ffL<<0) #define BNX2_TBDR_FTQ_CMD_WR_TOP (1L<<10) @@ -2624,7 +4531,15 @@ struct l2_fhdr { #define BNX2_TDMA_COMMAND 0x00005c00 #define BNX2_TDMA_COMMAND_ENABLED (1L<<0) #define BNX2_TDMA_COMMAND_MASTER_ABORT (1L<<4) +#define BNX2_TDMA_COMMAND_CS16_ERR (1L<<5) #define BNX2_TDMA_COMMAND_BAD_L2_LENGTH_ABORT (1L<<7) +#define BNX2_TDMA_COMMAND_MASK_CS1 (1L<<20) +#define BNX2_TDMA_COMMAND_MASK_CS2 (1L<<21) +#define BNX2_TDMA_COMMAND_MASK_CS3 (1L<<22) +#define BNX2_TDMA_COMMAND_MASK_CS4 (1L<<23) +#define BNX2_TDMA_COMMAND_FORCE_ILOCK_CKERR (1L<<24) +#define BNX2_TDMA_COMMAND_OFIFO_CLR (1L<<30) +#define BNX2_TDMA_COMMAND_IFIFO_CLR (1L<<31) #define BNX2_TDMA_STATUS 0x00005c04 #define BNX2_TDMA_STATUS_DMA_WAIT (1L<<0) @@ -2633,10 +4548,18 @@ struct l2_fhdr { #define BNX2_TDMA_STATUS_LOCK_WAIT (1L<<3) #define BNX2_TDMA_STATUS_FTQ_ENTRY_CNT (1L<<16) #define BNX2_TDMA_STATUS_BURST_CNT (1L<<17) +#define BNX2_TDMA_STATUS_MAX_IFIFO_DEPTH (0x3fL<<20) +#define BNX2_TDMA_STATUS_OFIFO_OVERFLOW (1L<<30) +#define BNX2_TDMA_STATUS_IFIFO_OVERFLOW (1L<<31) #define BNX2_TDMA_CONFIG 0x00005c08 #define BNX2_TDMA_CONFIG_ONE_DMA (1L<<0) #define BNX2_TDMA_CONFIG_ONE_RECORD (1L<<1) +#define BNX2_TDMA_CONFIG_NUM_DMA_CHAN (0x3L<<2) +#define BNX2_TDMA_CONFIG_NUM_DMA_CHAN_0 (0L<<2) +#define BNX2_TDMA_CONFIG_NUM_DMA_CHAN_1 (1L<<2) +#define BNX2_TDMA_CONFIG_NUM_DMA_CHAN_2 (2L<<2) +#define BNX2_TDMA_CONFIG_NUM_DMA_CHAN_3 (3L<<2) #define BNX2_TDMA_CONFIG_LIMIT_SZ (0xfL<<4) #define BNX2_TDMA_CONFIG_LIMIT_SZ_64 (0L<<4) #define BNX2_TDMA_CONFIG_LIMIT_SZ_128 (0x4L<<4) @@ -2649,7 +4572,35 @@ struct l2_fhdr { #define BNX2_TDMA_CONFIG_LINE_SZ_512 (8L<<8) #define BNX2_TDMA_CONFIG_ALIGN_ENA (1L<<15) #define BNX2_TDMA_CONFIG_CHK_L2_BD (1L<<16) +#define BNX2_TDMA_CONFIG_CMPL_ENTRY (1L<<17) +#define BNX2_TDMA_CONFIG_OFIFO_CMP (1L<<19) +#define BNX2_TDMA_CONFIG_OFIFO_CMP_3 (0L<<19) +#define BNX2_TDMA_CONFIG_OFIFO_CMP_2 (1L<<19) #define BNX2_TDMA_CONFIG_FIFO_CMP (0xfL<<20) +#define BNX2_TDMA_CONFIG_IFIFO_DEPTH_XI (0x7L<<20) +#define BNX2_TDMA_CONFIG_IFIFO_DEPTH_0_XI (0L<<20) +#define BNX2_TDMA_CONFIG_IFIFO_DEPTH_4_XI (1L<<20) +#define BNX2_TDMA_CONFIG_IFIFO_DEPTH_8_XI (2L<<20) +#define BNX2_TDMA_CONFIG_IFIFO_DEPTH_16_XI (3L<<20) +#define BNX2_TDMA_CONFIG_IFIFO_DEPTH_32_XI (4L<<20) +#define BNX2_TDMA_CONFIG_IFIFO_DEPTH_64_XI (5L<<20) +#define BNX2_TDMA_CONFIG_FIFO_CMP_EN_XI (1L<<23) +#define BNX2_TDMA_CONFIG_BYTES_OST_XI (0x7L<<24) +#define BNX2_TDMA_CONFIG_BYTES_OST_512_XI (0L<<24) +#define BNX2_TDMA_CONFIG_BYTES_OST_1024_XI (1L<<24) +#define BNX2_TDMA_CONFIG_BYTES_OST_2048_XI (2L<<24) +#define BNX2_TDMA_CONFIG_BYTES_OST_4096_XI (3L<<24) +#define BNX2_TDMA_CONFIG_BYTES_OST_8192_XI (4L<<24) +#define BNX2_TDMA_CONFIG_BYTES_OST_16384_XI (5L<<24) +#define BNX2_TDMA_CONFIG_HC_BYPASS_XI (1L<<27) +#define BNX2_TDMA_CONFIG_LCL_MRRS_XI (0x7L<<28) +#define BNX2_TDMA_CONFIG_LCL_MRRS_128_XI (0L<<28) +#define BNX2_TDMA_CONFIG_LCL_MRRS_256_XI (1L<<28) +#define BNX2_TDMA_CONFIG_LCL_MRRS_512_XI (2L<<28) +#define BNX2_TDMA_CONFIG_LCL_MRRS_1024_XI (3L<<28) +#define BNX2_TDMA_CONFIG_LCL_MRRS_2048_XI (4L<<28) +#define BNX2_TDMA_CONFIG_LCL_MRRS_4096_XI (5L<<28) +#define BNX2_TDMA_CONFIG_LCL_MRRS_EN_XI (1L<<31) #define BNX2_TDMA_PAYLOAD_PROD 0x00005c0c #define BNX2_TDMA_PAYLOAD_PROD_VALUE (0x1fffL<<3) @@ -2685,7 +4636,22 @@ struct l2_fhdr { #define BNX2_TDMA_DR_INTF_STATUS_NXT_PNTR (0xfL<<12) #define BNX2_TDMA_DR_INTF_STATUS_BYTE_COUNT (0x7L<<16) -#define BNX2_TDMA_FTQ_DATA 0x00005fc0 +#define BNX2_TDMA_PUSH_FSM 0x00005c90 +#define BNX2_TDMA_BD_IF_DEBUG 0x00005c94 +#define BNX2_TDMA_DMAD_IF_DEBUG 0x00005c98 +#define BNX2_TDMA_CTX_IF_DEBUG 0x00005c9c +#define BNX2_TDMA_TPBUF_IF_DEBUG 0x00005ca0 +#define BNX2_TDMA_DR_IF_DEBUG 0x00005ca4 +#define BNX2_TDMA_TPATQ_IF_DEBUG 0x00005ca8 +#define BNX2_TDMA_TDMA_ILOCK_CKSUM 0x00005cac +#define BNX2_TDMA_TDMA_ILOCK_CKSUM_CALCULATED (0xffffL<<0) +#define BNX2_TDMA_TDMA_ILOCK_CKSUM_EXPECTED (0xffffL<<16) + +#define BNX2_TDMA_TDMA_PCIE_CKSUM 0x00005cb0 +#define BNX2_TDMA_TDMA_PCIE_CKSUM_CALCULATED (0xffffL<<0) +#define BNX2_TDMA_TDMA_PCIE_CKSUM_EXPECTED (0xffffL<<16) + +#define BNX2_TDMA_TDMAQ 0x00005fc0 #define BNX2_TDMA_FTQ_CMD 0x00005ff8 #define BNX2_TDMA_FTQ_CMD_OFFSET (0x3ffL<<0) #define BNX2_TDMA_FTQ_CMD_WR_TOP (1L<<10) @@ -2724,6 +4690,8 @@ struct l2_fhdr { #define BNX2_HC_COMMAND_FORCE_INT_LOW (2L<<19) #define BNX2_HC_COMMAND_FORCE_INT_FREE (3L<<19) #define BNX2_HC_COMMAND_CLR_STAT_NOW (1L<<21) +#define BNX2_HC_COMMAND_MAIN_PWR_INT (1L<<22) +#define BNX2_HC_COMMAND_COAL_ON_NEXT_EVENT (1L<<27) #define BNX2_HC_STATUS 0x00006804 #define BNX2_HC_STATUS_MASTER_ABORT (1L<<0) @@ -2746,6 +4714,23 @@ struct l2_fhdr { #define BNX2_HC_CONFIG_STATISTIC_PRIORITY (1L<<5) #define BNX2_HC_CONFIG_STATUS_PRIORITY (1L<<6) #define BNX2_HC_CONFIG_STAT_MEM_ADDR (0xffL<<8) +#define BNX2_HC_CONFIG_PER_MODE (1L<<16) +#define BNX2_HC_CONFIG_ONE_SHOT (1L<<17) +#define BNX2_HC_CONFIG_USE_INT_PARAM (1L<<18) +#define BNX2_HC_CONFIG_SET_MASK_AT_RD (1L<<19) +#define BNX2_HC_CONFIG_PER_COLLECT_LIMIT (0xfL<<20) +#define BNX2_HC_CONFIG_SB_ADDR_INC (0x7L<<24) +#define BNX2_HC_CONFIG_SB_ADDR_INC_64B (0L<<24) +#define BNX2_HC_CONFIG_SB_ADDR_INC_128B (1L<<24) +#define BNX2_HC_CONFIG_SB_ADDR_INC_256B (2L<<24) +#define BNX2_HC_CONFIG_SB_ADDR_INC_512B (3L<<24) +#define BNX2_HC_CONFIG_SB_ADDR_INC_1024B (4L<<24) +#define BNX2_HC_CONFIG_SB_ADDR_INC_2048B (5L<<24) +#define BNX2_HC_CONFIG_SB_ADDR_INC_4096B (6L<<24) +#define BNX2_HC_CONFIG_SB_ADDR_INC_8192B (7L<<24) +#define BNX2_HC_CONFIG_GEN_STAT_AVG_INTR (1L<<29) +#define BNX2_HC_CONFIG_UNMASK_ALL (1L<<30) +#define BNX2_HC_CONFIG_TX_SEL (1L<<31) #define BNX2_HC_ATTN_BITS_ENABLE 0x0000680c #define BNX2_HC_STATUS_ADDR_L 0x00006810 @@ -2782,6 +4767,7 @@ struct l2_fhdr { #define BNX2_HC_PERIODIC_TICKS 0x0000683c #define BNX2_HC_PERIODIC_TICKS_HC_PERIODIC_TICKS (0xffffL<<0) +#define BNX2_HC_PERIODIC_TICKS_HC_INT_PERIODIC_TICKS (0xffffL<<16) #define BNX2_HC_STAT_COLLECT_TICKS 0x00006840 #define BNX2_HC_STAT_COLLECT_TICKS_HC_STAT_COLL_TICKS (0xffL<<4) @@ -2789,6 +4775,10 @@ struct l2_fhdr { #define BNX2_HC_STATS_TICKS 0x00006844 #define BNX2_HC_STATS_TICKS_HC_STAT_TICKS (0xffffL<<8) +#define BNX2_HC_STATS_INTERRUPT_STATUS 0x00006848 +#define BNX2_HC_STATS_INTERRUPT_STATUS_SB_STATUS (0x1ffL<<0) +#define BNX2_HC_STATS_INTERRUPT_STATUS_INT_STATUS (0x1ffL<<16) + #define BNX2_HC_STAT_MEM_DATA 0x0000684c #define BNX2_HC_STAT_GEN_SEL_0 0x00006850 #define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0 (0x7fL<<0) @@ -2917,24 +4907,108 @@ struct l2_fhdr { #define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_1 (0x7fL<<8) #define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_2 (0x7fL<<16) #define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_3 (0x7fL<<24) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_XI (0xffL<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_UMP_RX_FRAME_DROP_XI (52L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_UNUSED_S0_XI (57L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_UNUSED_S1_XI (58L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_UNUSED_S2_XI (85L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_UNUSED_S3_XI (86L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_UNUSED_S4_XI (87L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_UNUSED_S5_XI (88L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_UNUSED_S6_XI (89L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_UNUSED_S7_XI (90L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_UNUSED_S8_XI (91L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_UNUSED_S9_XI (92L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_UNUSED_S10_XI (93L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_MQ_IDB_OFLOW_XI (94L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_CTX_BLK_RD_CNT_XI (123L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_CTX_BLK_WR_CNT_XI (124L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_CTX_HITS_XI (125L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_CTX_MISSES_XI (126L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_HC_NUM_STATUS_BLOCKS_VEC1_XI (128L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_HC_NUM_INT_GEN_VEC1_XI (129L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_HC_NUM_INT_MBOX_WR_VEC1_XI (130L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_HC_CORE_CLKS_TO_HW_INTACK_VEC1_XI (131L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_HC_CORE_CLKS_TO_SW_INTACK_VEC1_XI (132L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_HC_CORE_CLKS_DURING_SW_INTACK_VEC1_XI (133L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_HC_NUM_STATUS_BLOCKS_VEC2_XI (134L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_HC_NUM_INT_GEN_VEC2_XI (135L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_HC_NUM_INT_MBOX_WR_VEC2_XI (136L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_HC_CORE_CLKS_TO_HW_INTACK_VEC2_XI (137L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_HC_CORE_CLKS_TO_SW_INTACK_VEC2_XI (138L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_HC_CORE_CLKS_DURING_SW_INTACK_VEC2_XI (139L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_HC_NUM_STATUS_BLOCKS_VEC3_XI (140L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_HC_NUM_INT_GEN_VEC3_XI (141L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_HC_NUM_INT_MBOX_WR_VEC3_XI (142L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_HC_CORE_CLKS_TO_HW_INTACK_VEC3_XI (143L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_HC_CORE_CLKS_TO_SW_INTACK_VEC3_XI (144L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_HC_CORE_CLKS_DURING_SW_INTACK_VEC3_XI (145L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_HC_NUM_STATUS_BLOCKS_VEC4_XI (146L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_HC_NUM_INT_GEN_VEC4_XI (147L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_HC_NUM_INT_MBOX_WR_VEC4_XI (148L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_HC_CORE_CLKS_TO_HW_INTACK_VEC4_XI (149L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_HC_CORE_CLKS_TO_SW_INTACK_VEC4_XI (150L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_HC_CORE_CLKS_DURING_SW_INTACK_VEC4_XI (151L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_HC_NUM_STATUS_BLOCKS_VEC5_XI (152L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_HC_NUM_INT_GEN_VEC5_XI (153L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_HC_NUM_INT_MBOX_WR_VEC5_XI (154L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_HC_CORE_CLKS_TO_HW_INTACK_VEC5_XI (155L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_HC_CORE_CLKS_TO_SW_INTACK_VEC5_XI (156L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_HC_CORE_CLKS_DURING_SW_INTACK_VEC5_XI (157L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_HC_NUM_STATUS_BLOCKS_VEC6_XI (158L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_HC_NUM_INT_GEN_VEC6_XI (159L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_HC_NUM_INT_MBOX_WR_VEC6_XI (160L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_HC_CORE_CLKS_TO_HW_INTACK_VEC6_XI (161L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_HC_CORE_CLKS_TO_SW_INTACK_VEC6_XI (162L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_HC_CORE_CLKS_DURING_SW_INTACK_VEC6_XI (163L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_HC_NUM_STATUS_BLOCKS_VEC7_XI (164L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_HC_NUM_INT_GEN_VEC7_XI (165L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_HC_NUM_INT_MBOX_WR_VEC7_XI (166L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_HC_CORE_CLKS_TO_HW_INTACK_VEC7_XI (167L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_HC_CORE_CLKS_TO_SW_INTACK_VEC7_XI (168L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_HC_CORE_CLKS_DURING_SW_INTACK_VEC7_XI (169L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_HC_NUM_STATUS_BLOCKS_VEC8_XI (170L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_HC_NUM_INT_GEN_VEC8_XI (171L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_HC_NUM_INT_MBOX_WR_VEC8_XI (172L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_HC_CORE_CLKS_TO_HW_INTACK_VEC8_XI (173L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_HC_CORE_CLKS_TO_SW_INTACK_VEC8_XI (174L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_HC_CORE_CLKS_DURING_SW_INTACK_VEC8_XI (175L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RV2PCS_CMD_CNT_XI (176L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RV2PCS_SLOT_CNT_XI (177L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RV2PCSQ_VALID_CNT_XI (178L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_1_XI (0xffL<<8) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_2_XI (0xffL<<16) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_3_XI (0xffL<<24) #define BNX2_HC_STAT_GEN_SEL_1 0x00006854 #define BNX2_HC_STAT_GEN_SEL_1_GEN_SEL_4 (0x7fL<<0) #define BNX2_HC_STAT_GEN_SEL_1_GEN_SEL_5 (0x7fL<<8) #define BNX2_HC_STAT_GEN_SEL_1_GEN_SEL_6 (0x7fL<<16) #define BNX2_HC_STAT_GEN_SEL_1_GEN_SEL_7 (0x7fL<<24) +#define BNX2_HC_STAT_GEN_SEL_1_GEN_SEL_4_XI (0xffL<<0) +#define BNX2_HC_STAT_GEN_SEL_1_GEN_SEL_5_XI (0xffL<<8) +#define BNX2_HC_STAT_GEN_SEL_1_GEN_SEL_6_XI (0xffL<<16) +#define BNX2_HC_STAT_GEN_SEL_1_GEN_SEL_7_XI (0xffL<<24) #define BNX2_HC_STAT_GEN_SEL_2 0x00006858 #define BNX2_HC_STAT_GEN_SEL_2_GEN_SEL_8 (0x7fL<<0) #define BNX2_HC_STAT_GEN_SEL_2_GEN_SEL_9 (0x7fL<<8) #define BNX2_HC_STAT_GEN_SEL_2_GEN_SEL_10 (0x7fL<<16) #define BNX2_HC_STAT_GEN_SEL_2_GEN_SEL_11 (0x7fL<<24) +#define BNX2_HC_STAT_GEN_SEL_2_GEN_SEL_8_XI (0xffL<<0) +#define BNX2_HC_STAT_GEN_SEL_2_GEN_SEL_9_XI (0xffL<<8) +#define BNX2_HC_STAT_GEN_SEL_2_GEN_SEL_10_XI (0xffL<<16) +#define BNX2_HC_STAT_GEN_SEL_2_GEN_SEL_11_XI (0xffL<<24) #define BNX2_HC_STAT_GEN_SEL_3 0x0000685c #define BNX2_HC_STAT_GEN_SEL_3_GEN_SEL_12 (0x7fL<<0) #define BNX2_HC_STAT_GEN_SEL_3_GEN_SEL_13 (0x7fL<<8) #define BNX2_HC_STAT_GEN_SEL_3_GEN_SEL_14 (0x7fL<<16) #define BNX2_HC_STAT_GEN_SEL_3_GEN_SEL_15 (0x7fL<<24) +#define BNX2_HC_STAT_GEN_SEL_3_GEN_SEL_12_XI (0xffL<<0) +#define BNX2_HC_STAT_GEN_SEL_3_GEN_SEL_13_XI (0xffL<<8) +#define BNX2_HC_STAT_GEN_SEL_3_GEN_SEL_14_XI (0xffL<<16) +#define BNX2_HC_STAT_GEN_SEL_3_GEN_SEL_15_XI (0xffL<<24) #define BNX2_HC_STAT_GEN_STAT0 0x00006888 #define BNX2_HC_STAT_GEN_STAT1 0x0000688c @@ -2968,6 +5042,7 @@ struct l2_fhdr { #define BNX2_HC_STAT_GEN_STAT_AC13 0x000068fc #define BNX2_HC_STAT_GEN_STAT_AC14 0x00006900 #define BNX2_HC_STAT_GEN_STAT_AC15 0x00006904 +#define BNX2_HC_STAT_GEN_STAT_AC 0x000068c8 #define BNX2_HC_VIS 0x00006908 #define BNX2_HC_VIS_STAT_BUILD_STATE (0xfL<<0) #define BNX2_HC_VIS_STAT_BUILD_STATE_IDLE (0L<<0) @@ -3038,6 +5113,349 @@ struct l2_fhdr { #define BNX2_HC_DEBUG_VECT_PEEK_2_PEEK_EN (1L<<27) #define BNX2_HC_DEBUG_VECT_PEEK_2_SEL (0xfL<<28) +#define BNX2_HC_COALESCE_NOW 0x00006914 +#define BNX2_HC_COALESCE_NOW_COAL_NOW (0x1ffL<<1) +#define BNX2_HC_COALESCE_NOW_COAL_NOW_WO_INT (0x1ffL<<11) +#define BNX2_HC_COALESCE_NOW_COAL_ON_NXT_EVENT (0x1ffL<<21) + +#define BNX2_HC_MSIX_BIT_VECTOR 0x00006918 +#define BNX2_HC_MSIX_BIT_VECTOR_VAL (0x1ffL<<0) + +#define BNX2_HC_SB_CONFIG_1 0x00006a00 +#define BNX2_HC_SB_CONFIG_1_RX_TMR_MODE (1L<<1) +#define BNX2_HC_SB_CONFIG_1_TX_TMR_MODE (1L<<2) +#define BNX2_HC_SB_CONFIG_1_COM_TMR_MODE (1L<<3) +#define BNX2_HC_SB_CONFIG_1_CMD_TMR_MODE (1L<<4) +#define BNX2_HC_SB_CONFIG_1_PER_MODE (1L<<16) +#define BNX2_HC_SB_CONFIG_1_ONE_SHOT (1L<<17) +#define BNX2_HC_SB_CONFIG_1_USE_INT_PARAM (1L<<18) +#define BNX2_HC_SB_CONFIG_1_PER_COLLECT_LIMIT (0xfL<<20) + +#define BNX2_HC_TX_QUICK_CONS_TRIP_1 0x00006a04 +#define BNX2_HC_TX_QUICK_CONS_TRIP_1_VALUE (0xffL<<0) +#define BNX2_HC_TX_QUICK_CONS_TRIP_1_INT (0xffL<<16) + +#define BNX2_HC_COMP_PROD_TRIP_1 0x00006a08 +#define BNX2_HC_COMP_PROD_TRIP_1_VALUE (0xffL<<0) +#define BNX2_HC_COMP_PROD_TRIP_1_INT (0xffL<<16) + +#define BNX2_HC_RX_QUICK_CONS_TRIP_1 0x00006a0c +#define BNX2_HC_RX_QUICK_CONS_TRIP_1_VALUE (0xffL<<0) +#define BNX2_HC_RX_QUICK_CONS_TRIP_1_INT (0xffL<<16) + +#define BNX2_HC_RX_TICKS_1 0x00006a10 +#define BNX2_HC_RX_TICKS_1_VALUE (0x3ffL<<0) +#define BNX2_HC_RX_TICKS_1_INT (0x3ffL<<16) + +#define BNX2_HC_TX_TICKS_1 0x00006a14 +#define BNX2_HC_TX_TICKS_1_VALUE (0x3ffL<<0) +#define BNX2_HC_TX_TICKS_1_INT (0x3ffL<<16) + +#define BNX2_HC_COM_TICKS_1 0x00006a18 +#define BNX2_HC_COM_TICKS_1_VALUE (0x3ffL<<0) +#define BNX2_HC_COM_TICKS_1_INT (0x3ffL<<16) + +#define BNX2_HC_CMD_TICKS_1 0x00006a1c +#define BNX2_HC_CMD_TICKS_1_VALUE (0x3ffL<<0) +#define BNX2_HC_CMD_TICKS_1_INT (0x3ffL<<16) + +#define BNX2_HC_PERIODIC_TICKS_1 0x00006a20 +#define BNX2_HC_PERIODIC_TICKS_1_HC_PERIODIC_TICKS (0xffffL<<0) +#define BNX2_HC_PERIODIC_TICKS_1_HC_INT_PERIODIC_TICKS (0xffffL<<16) + +#define BNX2_HC_SB_CONFIG_2 0x00006a24 +#define BNX2_HC_SB_CONFIG_2_RX_TMR_MODE (1L<<1) +#define BNX2_HC_SB_CONFIG_2_TX_TMR_MODE (1L<<2) +#define BNX2_HC_SB_CONFIG_2_COM_TMR_MODE (1L<<3) +#define BNX2_HC_SB_CONFIG_2_CMD_TMR_MODE (1L<<4) +#define BNX2_HC_SB_CONFIG_2_PER_MODE (1L<<16) +#define BNX2_HC_SB_CONFIG_2_ONE_SHOT (1L<<17) +#define BNX2_HC_SB_CONFIG_2_USE_INT_PARAM (1L<<18) +#define BNX2_HC_SB_CONFIG_2_PER_COLLECT_LIMIT (0xfL<<20) + +#define BNX2_HC_TX_QUICK_CONS_TRIP_2 0x00006a28 +#define BNX2_HC_TX_QUICK_CONS_TRIP_2_VALUE (0xffL<<0) +#define BNX2_HC_TX_QUICK_CONS_TRIP_2_INT (0xffL<<16) + +#define BNX2_HC_COMP_PROD_TRIP_2 0x00006a2c +#define BNX2_HC_COMP_PROD_TRIP_2_VALUE (0xffL<<0) +#define BNX2_HC_COMP_PROD_TRIP_2_INT (0xffL<<16) + +#define BNX2_HC_RX_QUICK_CONS_TRIP_2 0x00006a30 +#define BNX2_HC_RX_QUICK_CONS_TRIP_2_VALUE (0xffL<<0) +#define BNX2_HC_RX_QUICK_CONS_TRIP_2_INT (0xffL<<16) + +#define BNX2_HC_RX_TICKS_2 0x00006a34 +#define BNX2_HC_RX_TICKS_2_VALUE (0x3ffL<<0) +#define BNX2_HC_RX_TICKS_2_INT (0x3ffL<<16) + +#define BNX2_HC_TX_TICKS_2 0x00006a38 +#define BNX2_HC_TX_TICKS_2_VALUE (0x3ffL<<0) +#define BNX2_HC_TX_TICKS_2_INT (0x3ffL<<16) + +#define BNX2_HC_COM_TICKS_2 0x00006a3c +#define BNX2_HC_COM_TICKS_2_VALUE (0x3ffL<<0) +#define BNX2_HC_COM_TICKS_2_INT (0x3ffL<<16) + +#define BNX2_HC_CMD_TICKS_2 0x00006a40 +#define BNX2_HC_CMD_TICKS_2_VALUE (0x3ffL<<0) +#define BNX2_HC_CMD_TICKS_2_INT (0x3ffL<<16) + +#define BNX2_HC_PERIODIC_TICKS_2 0x00006a44 +#define BNX2_HC_PERIODIC_TICKS_2_HC_PERIODIC_TICKS (0xffffL<<0) +#define BNX2_HC_PERIODIC_TICKS_2_HC_INT_PERIODIC_TICKS (0xffffL<<16) + +#define BNX2_HC_SB_CONFIG_3 0x00006a48 +#define BNX2_HC_SB_CONFIG_3_RX_TMR_MODE (1L<<1) +#define BNX2_HC_SB_CONFIG_3_TX_TMR_MODE (1L<<2) +#define BNX2_HC_SB_CONFIG_3_COM_TMR_MODE (1L<<3) +#define BNX2_HC_SB_CONFIG_3_CMD_TMR_MODE (1L<<4) +#define BNX2_HC_SB_CONFIG_3_PER_MODE (1L<<16) +#define BNX2_HC_SB_CONFIG_3_ONE_SHOT (1L<<17) +#define BNX2_HC_SB_CONFIG_3_USE_INT_PARAM (1L<<18) +#define BNX2_HC_SB_CONFIG_3_PER_COLLECT_LIMIT (0xfL<<20) + +#define BNX2_HC_TX_QUICK_CONS_TRIP_3 0x00006a4c +#define BNX2_HC_TX_QUICK_CONS_TRIP_3_VALUE (0xffL<<0) +#define BNX2_HC_TX_QUICK_CONS_TRIP_3_INT (0xffL<<16) + +#define BNX2_HC_COMP_PROD_TRIP_3 0x00006a50 +#define BNX2_HC_COMP_PROD_TRIP_3_VALUE (0xffL<<0) +#define BNX2_HC_COMP_PROD_TRIP_3_INT (0xffL<<16) + +#define BNX2_HC_RX_QUICK_CONS_TRIP_3 0x00006a54 +#define BNX2_HC_RX_QUICK_CONS_TRIP_3_VALUE (0xffL<<0) +#define BNX2_HC_RX_QUICK_CONS_TRIP_3_INT (0xffL<<16) + +#define BNX2_HC_RX_TICKS_3 0x00006a58 +#define BNX2_HC_RX_TICKS_3_VALUE (0x3ffL<<0) +#define BNX2_HC_RX_TICKS_3_INT (0x3ffL<<16) + +#define BNX2_HC_TX_TICKS_3 0x00006a5c +#define BNX2_HC_TX_TICKS_3_VALUE (0x3ffL<<0) +#define BNX2_HC_TX_TICKS_3_INT (0x3ffL<<16) + +#define BNX2_HC_COM_TICKS_3 0x00006a60 +#define BNX2_HC_COM_TICKS_3_VALUE (0x3ffL<<0) +#define BNX2_HC_COM_TICKS_3_INT (0x3ffL<<16) + +#define BNX2_HC_CMD_TICKS_3 0x00006a64 +#define BNX2_HC_CMD_TICKS_3_VALUE (0x3ffL<<0) +#define BNX2_HC_CMD_TICKS_3_INT (0x3ffL<<16) + +#define BNX2_HC_PERIODIC_TICKS_3 0x00006a68 +#define BNX2_HC_PERIODIC_TICKS_3_HC_PERIODIC_TICKS (0xffffL<<0) +#define BNX2_HC_PERIODIC_TICKS_3_HC_INT_PERIODIC_TICKS (0xffffL<<16) + +#define BNX2_HC_SB_CONFIG_4 0x00006a6c +#define BNX2_HC_SB_CONFIG_4_RX_TMR_MODE (1L<<1) +#define BNX2_HC_SB_CONFIG_4_TX_TMR_MODE (1L<<2) +#define BNX2_HC_SB_CONFIG_4_COM_TMR_MODE (1L<<3) +#define BNX2_HC_SB_CONFIG_4_CMD_TMR_MODE (1L<<4) +#define BNX2_HC_SB_CONFIG_4_PER_MODE (1L<<16) +#define BNX2_HC_SB_CONFIG_4_ONE_SHOT (1L<<17) +#define BNX2_HC_SB_CONFIG_4_USE_INT_PARAM (1L<<18) +#define BNX2_HC_SB_CONFIG_4_PER_COLLECT_LIMIT (0xfL<<20) + +#define BNX2_HC_TX_QUICK_CONS_TRIP_4 0x00006a70 +#define BNX2_HC_TX_QUICK_CONS_TRIP_4_VALUE (0xffL<<0) +#define BNX2_HC_TX_QUICK_CONS_TRIP_4_INT (0xffL<<16) + +#define BNX2_HC_COMP_PROD_TRIP_4 0x00006a74 +#define BNX2_HC_COMP_PROD_TRIP_4_VALUE (0xffL<<0) +#define BNX2_HC_COMP_PROD_TRIP_4_INT (0xffL<<16) + +#define BNX2_HC_RX_QUICK_CONS_TRIP_4 0x00006a78 +#define BNX2_HC_RX_QUICK_CONS_TRIP_4_VALUE (0xffL<<0) +#define BNX2_HC_RX_QUICK_CONS_TRIP_4_INT (0xffL<<16) + +#define BNX2_HC_RX_TICKS_4 0x00006a7c +#define BNX2_HC_RX_TICKS_4_VALUE (0x3ffL<<0) +#define BNX2_HC_RX_TICKS_4_INT (0x3ffL<<16) + +#define BNX2_HC_TX_TICKS_4 0x00006a80 +#define BNX2_HC_TX_TICKS_4_VALUE (0x3ffL<<0) +#define BNX2_HC_TX_TICKS_4_INT (0x3ffL<<16) + +#define BNX2_HC_COM_TICKS_4 0x00006a84 +#define BNX2_HC_COM_TICKS_4_VALUE (0x3ffL<<0) +#define BNX2_HC_COM_TICKS_4_INT (0x3ffL<<16) + +#define BNX2_HC_CMD_TICKS_4 0x00006a88 +#define BNX2_HC_CMD_TICKS_4_VALUE (0x3ffL<<0) +#define BNX2_HC_CMD_TICKS_4_INT (0x3ffL<<16) + +#define BNX2_HC_PERIODIC_TICKS_4 0x00006a8c +#define BNX2_HC_PERIODIC_TICKS_4_HC_PERIODIC_TICKS (0xffffL<<0) +#define BNX2_HC_PERIODIC_TICKS_4_HC_INT_PERIODIC_TICKS (0xffffL<<16) + +#define BNX2_HC_SB_CONFIG_5 0x00006a90 +#define BNX2_HC_SB_CONFIG_5_RX_TMR_MODE (1L<<1) +#define BNX2_HC_SB_CONFIG_5_TX_TMR_MODE (1L<<2) +#define BNX2_HC_SB_CONFIG_5_COM_TMR_MODE (1L<<3) +#define BNX2_HC_SB_CONFIG_5_CMD_TMR_MODE (1L<<4) +#define BNX2_HC_SB_CONFIG_5_PER_MODE (1L<<16) +#define BNX2_HC_SB_CONFIG_5_ONE_SHOT (1L<<17) +#define BNX2_HC_SB_CONFIG_5_USE_INT_PARAM (1L<<18) +#define BNX2_HC_SB_CONFIG_5_PER_COLLECT_LIMIT (0xfL<<20) + +#define BNX2_HC_TX_QUICK_CONS_TRIP_5 0x00006a94 +#define BNX2_HC_TX_QUICK_CONS_TRIP_5_VALUE (0xffL<<0) +#define BNX2_HC_TX_QUICK_CONS_TRIP_5_INT (0xffL<<16) + +#define BNX2_HC_COMP_PROD_TRIP_5 0x00006a98 +#define BNX2_HC_COMP_PROD_TRIP_5_VALUE (0xffL<<0) +#define BNX2_HC_COMP_PROD_TRIP_5_INT (0xffL<<16) + +#define BNX2_HC_RX_QUICK_CONS_TRIP_5 0x00006a9c +#define BNX2_HC_RX_QUICK_CONS_TRIP_5_VALUE (0xffL<<0) +#define BNX2_HC_RX_QUICK_CONS_TRIP_5_INT (0xffL<<16) + +#define BNX2_HC_RX_TICKS_5 0x00006aa0 +#define BNX2_HC_RX_TICKS_5_VALUE (0x3ffL<<0) +#define BNX2_HC_RX_TICKS_5_INT (0x3ffL<<16) + +#define BNX2_HC_TX_TICKS_5 0x00006aa4 +#define BNX2_HC_TX_TICKS_5_VALUE (0x3ffL<<0) +#define BNX2_HC_TX_TICKS_5_INT (0x3ffL<<16) + +#define BNX2_HC_COM_TICKS_5 0x00006aa8 +#define BNX2_HC_COM_TICKS_5_VALUE (0x3ffL<<0) +#define BNX2_HC_COM_TICKS_5_INT (0x3ffL<<16) + +#define BNX2_HC_CMD_TICKS_5 0x00006aac +#define BNX2_HC_CMD_TICKS_5_VALUE (0x3ffL<<0) +#define BNX2_HC_CMD_TICKS_5_INT (0x3ffL<<16) + +#define BNX2_HC_PERIODIC_TICKS_5 0x00006ab0 +#define BNX2_HC_PERIODIC_TICKS_5_HC_PERIODIC_TICKS (0xffffL<<0) +#define BNX2_HC_PERIODIC_TICKS_5_HC_INT_PERIODIC_TICKS (0xffffL<<16) + +#define BNX2_HC_SB_CONFIG_6 0x00006ab4 +#define BNX2_HC_SB_CONFIG_6_RX_TMR_MODE (1L<<1) +#define BNX2_HC_SB_CONFIG_6_TX_TMR_MODE (1L<<2) +#define BNX2_HC_SB_CONFIG_6_COM_TMR_MODE (1L<<3) +#define BNX2_HC_SB_CONFIG_6_CMD_TMR_MODE (1L<<4) +#define BNX2_HC_SB_CONFIG_6_PER_MODE (1L<<16) +#define BNX2_HC_SB_CONFIG_6_ONE_SHOT (1L<<17) +#define BNX2_HC_SB_CONFIG_6_USE_INT_PARAM (1L<<18) +#define BNX2_HC_SB_CONFIG_6_PER_COLLECT_LIMIT (0xfL<<20) + +#define BNX2_HC_TX_QUICK_CONS_TRIP_6 0x00006ab8 +#define BNX2_HC_TX_QUICK_CONS_TRIP_6_VALUE (0xffL<<0) +#define BNX2_HC_TX_QUICK_CONS_TRIP_6_INT (0xffL<<16) + +#define BNX2_HC_COMP_PROD_TRIP_6 0x00006abc +#define BNX2_HC_COMP_PROD_TRIP_6_VALUE (0xffL<<0) +#define BNX2_HC_COMP_PROD_TRIP_6_INT (0xffL<<16) + +#define BNX2_HC_RX_QUICK_CONS_TRIP_6 0x00006ac0 +#define BNX2_HC_RX_QUICK_CONS_TRIP_6_VALUE (0xffL<<0) +#define BNX2_HC_RX_QUICK_CONS_TRIP_6_INT (0xffL<<16) + +#define BNX2_HC_RX_TICKS_6 0x00006ac4 +#define BNX2_HC_RX_TICKS_6_VALUE (0x3ffL<<0) +#define BNX2_HC_RX_TICKS_6_INT (0x3ffL<<16) + +#define BNX2_HC_TX_TICKS_6 0x00006ac8 +#define BNX2_HC_TX_TICKS_6_VALUE (0x3ffL<<0) +#define BNX2_HC_TX_TICKS_6_INT (0x3ffL<<16) + +#define BNX2_HC_COM_TICKS_6 0x00006acc +#define BNX2_HC_COM_TICKS_6_VALUE (0x3ffL<<0) +#define BNX2_HC_COM_TICKS_6_INT (0x3ffL<<16) + +#define BNX2_HC_CMD_TICKS_6 0x00006ad0 +#define BNX2_HC_CMD_TICKS_6_VALUE (0x3ffL<<0) +#define BNX2_HC_CMD_TICKS_6_INT (0x3ffL<<16) + +#define BNX2_HC_PERIODIC_TICKS_6 0x00006ad4 +#define BNX2_HC_PERIODIC_TICKS_6_HC_PERIODIC_TICKS (0xffffL<<0) +#define BNX2_HC_PERIODIC_TICKS_6_HC_INT_PERIODIC_TICKS (0xffffL<<16) + +#define BNX2_HC_SB_CONFIG_7 0x00006ad8 +#define BNX2_HC_SB_CONFIG_7_RX_TMR_MODE (1L<<1) +#define BNX2_HC_SB_CONFIG_7_TX_TMR_MODE (1L<<2) +#define BNX2_HC_SB_CONFIG_7_COM_TMR_MODE (1L<<3) +#define BNX2_HC_SB_CONFIG_7_CMD_TMR_MODE (1L<<4) +#define BNX2_HC_SB_CONFIG_7_PER_MODE (1L<<16) +#define BNX2_HC_SB_CONFIG_7_ONE_SHOT (1L<<17) +#define BNX2_HC_SB_CONFIG_7_USE_INT_PARAM (1L<<18) +#define BNX2_HC_SB_CONFIG_7_PER_COLLECT_LIMIT (0xfL<<20) + +#define BNX2_HC_TX_QUICK_CONS_TRIP_7 0x00006adc +#define BNX2_HC_TX_QUICK_CONS_TRIP_7_VALUE (0xffL<<0) +#define BNX2_HC_TX_QUICK_CONS_TRIP_7_INT (0xffL<<16) + +#define BNX2_HC_COMP_PROD_TRIP_7 0x00006ae0 +#define BNX2_HC_COMP_PROD_TRIP_7_VALUE (0xffL<<0) +#define BNX2_HC_COMP_PROD_TRIP_7_INT (0xffL<<16) + +#define BNX2_HC_RX_QUICK_CONS_TRIP_7 0x00006ae4 +#define BNX2_HC_RX_QUICK_CONS_TRIP_7_VALUE (0xffL<<0) +#define BNX2_HC_RX_QUICK_CONS_TRIP_7_INT (0xffL<<16) + +#define BNX2_HC_RX_TICKS_7 0x00006ae8 +#define BNX2_HC_RX_TICKS_7_VALUE (0x3ffL<<0) +#define BNX2_HC_RX_TICKS_7_INT (0x3ffL<<16) + +#define BNX2_HC_TX_TICKS_7 0x00006aec +#define BNX2_HC_TX_TICKS_7_VALUE (0x3ffL<<0) +#define BNX2_HC_TX_TICKS_7_INT (0x3ffL<<16) + +#define BNX2_HC_COM_TICKS_7 0x00006af0 +#define BNX2_HC_COM_TICKS_7_VALUE (0x3ffL<<0) +#define BNX2_HC_COM_TICKS_7_INT (0x3ffL<<16) + +#define BNX2_HC_CMD_TICKS_7 0x00006af4 +#define BNX2_HC_CMD_TICKS_7_VALUE (0x3ffL<<0) +#define BNX2_HC_CMD_TICKS_7_INT (0x3ffL<<16) + +#define BNX2_HC_PERIODIC_TICKS_7 0x00006af8 +#define BNX2_HC_PERIODIC_TICKS_7_HC_PERIODIC_TICKS (0xffffL<<0) +#define BNX2_HC_PERIODIC_TICKS_7_HC_INT_PERIODIC_TICKS (0xffffL<<16) + +#define BNX2_HC_SB_CONFIG_8 0x00006afc +#define BNX2_HC_SB_CONFIG_8_RX_TMR_MODE (1L<<1) +#define BNX2_HC_SB_CONFIG_8_TX_TMR_MODE (1L<<2) +#define BNX2_HC_SB_CONFIG_8_COM_TMR_MODE (1L<<3) +#define BNX2_HC_SB_CONFIG_8_CMD_TMR_MODE (1L<<4) +#define BNX2_HC_SB_CONFIG_8_PER_MODE (1L<<16) +#define BNX2_HC_SB_CONFIG_8_ONE_SHOT (1L<<17) +#define BNX2_HC_SB_CONFIG_8_USE_INT_PARAM (1L<<18) +#define BNX2_HC_SB_CONFIG_8_PER_COLLECT_LIMIT (0xfL<<20) + +#define BNX2_HC_TX_QUICK_CONS_TRIP_8 0x00006b00 +#define BNX2_HC_TX_QUICK_CONS_TRIP_8_VALUE (0xffL<<0) +#define BNX2_HC_TX_QUICK_CONS_TRIP_8_INT (0xffL<<16) + +#define BNX2_HC_COMP_PROD_TRIP_8 0x00006b04 +#define BNX2_HC_COMP_PROD_TRIP_8_VALUE (0xffL<<0) +#define BNX2_HC_COMP_PROD_TRIP_8_INT (0xffL<<16) + +#define BNX2_HC_RX_QUICK_CONS_TRIP_8 0x00006b08 +#define BNX2_HC_RX_QUICK_CONS_TRIP_8_VALUE (0xffL<<0) +#define BNX2_HC_RX_QUICK_CONS_TRIP_8_INT (0xffL<<16) + +#define BNX2_HC_RX_TICKS_8 0x00006b0c +#define BNX2_HC_RX_TICKS_8_VALUE (0x3ffL<<0) +#define BNX2_HC_RX_TICKS_8_INT (0x3ffL<<16) + +#define BNX2_HC_TX_TICKS_8 0x00006b10 +#define BNX2_HC_TX_TICKS_8_VALUE (0x3ffL<<0) +#define BNX2_HC_TX_TICKS_8_INT (0x3ffL<<16) + +#define BNX2_HC_COM_TICKS_8 0x00006b14 +#define BNX2_HC_COM_TICKS_8_VALUE (0x3ffL<<0) +#define BNX2_HC_COM_TICKS_8_INT (0x3ffL<<16) + +#define BNX2_HC_CMD_TICKS_8 0x00006b18 +#define BNX2_HC_CMD_TICKS_8_VALUE (0x3ffL<<0) +#define BNX2_HC_CMD_TICKS_8_INT (0x3ffL<<16) + +#define BNX2_HC_PERIODIC_TICKS_8 0x00006b1c +#define BNX2_HC_PERIODIC_TICKS_8_HC_PERIODIC_TICKS (0xffffL<<0) +#define BNX2_HC_PERIODIC_TICKS_8_HC_INT_PERIODIC_TICKS (0xffffL<<16) /* @@ -3063,7 +5481,7 @@ struct l2_fhdr { #define BNX2_TXP_CPU_STATE_PAGE_0_DATA_HALTED (1L<<3) #define BNX2_TXP_CPU_STATE_PAGE_0_INST_HALTED (1L<<4) #define BNX2_TXP_CPU_STATE_BAD_DATA_ADDR_HALTED (1L<<5) -#define BNX2_TXP_CPU_STATE_BAD_pc_HALTED (1L<<6) +#define BNX2_TXP_CPU_STATE_BAD_PC_HALTED (1L<<6) #define BNX2_TXP_CPU_STATE_ALIGN_HALTED (1L<<7) #define BNX2_TXP_CPU_STATE_FIO_ABORT_HALTED (1L<<8) #define BNX2_TXP_CPU_STATE_SOFT_HALTED (1L<<10) @@ -3111,7 +5529,7 @@ struct l2_fhdr { #define BNX2_TXP_CPU_LAST_BRANCH_ADDR_LBA (0x3fffffffL<<2) #define BNX2_TXP_CPU_REG_FILE 0x00045200 -#define BNX2_TXP_FTQ_DATA 0x000453c0 +#define BNX2_TXP_TXPQ 0x000453c0 #define BNX2_TXP_FTQ_CMD 0x000453f8 #define BNX2_TXP_FTQ_CMD_OFFSET (0x3ffL<<0) #define BNX2_TXP_FTQ_CMD_WR_TOP (1L<<10) @@ -3158,7 +5576,7 @@ struct l2_fhdr { #define BNX2_TPAT_CPU_STATE_PAGE_0_DATA_HALTED (1L<<3) #define BNX2_TPAT_CPU_STATE_PAGE_0_INST_HALTED (1L<<4) #define BNX2_TPAT_CPU_STATE_BAD_DATA_ADDR_HALTED (1L<<5) -#define BNX2_TPAT_CPU_STATE_BAD_pc_HALTED (1L<<6) +#define BNX2_TPAT_CPU_STATE_BAD_PC_HALTED (1L<<6) #define BNX2_TPAT_CPU_STATE_ALIGN_HALTED (1L<<7) #define BNX2_TPAT_CPU_STATE_FIO_ABORT_HALTED (1L<<8) #define BNX2_TPAT_CPU_STATE_SOFT_HALTED (1L<<10) @@ -3206,7 +5624,7 @@ struct l2_fhdr { #define BNX2_TPAT_CPU_LAST_BRANCH_ADDR_LBA (0x3fffffffL<<2) #define BNX2_TPAT_CPU_REG_FILE 0x00085200 -#define BNX2_TPAT_FTQ_DATA 0x000853c0 +#define BNX2_TPAT_TPATQ 0x000853c0 #define BNX2_TPAT_FTQ_CMD 0x000853f8 #define BNX2_TPAT_FTQ_CMD_OFFSET (0x3ffL<<0) #define BNX2_TPAT_FTQ_CMD_WR_TOP (1L<<10) @@ -3253,7 +5671,7 @@ struct l2_fhdr { #define BNX2_RXP_CPU_STATE_PAGE_0_DATA_HALTED (1L<<3) #define BNX2_RXP_CPU_STATE_PAGE_0_INST_HALTED (1L<<4) #define BNX2_RXP_CPU_STATE_BAD_DATA_ADDR_HALTED (1L<<5) -#define BNX2_RXP_CPU_STATE_BAD_pc_HALTED (1L<<6) +#define BNX2_RXP_CPU_STATE_BAD_PC_HALTED (1L<<6) #define BNX2_RXP_CPU_STATE_ALIGN_HALTED (1L<<7) #define BNX2_RXP_CPU_STATE_FIO_ABORT_HALTED (1L<<8) #define BNX2_RXP_CPU_STATE_SOFT_HALTED (1L<<10) @@ -3301,7 +5719,29 @@ struct l2_fhdr { #define BNX2_RXP_CPU_LAST_BRANCH_ADDR_LBA (0x3fffffffL<<2) #define BNX2_RXP_CPU_REG_FILE 0x000c5200 -#define BNX2_RXP_CFTQ_DATA 0x000c5380 +#define BNX2_RXP_PFE_PFE_CTL 0x000c537c +#define BNX2_RXP_PFE_PFE_CTL_INC_USAGE_CNT (1L<<0) +#define BNX2_RXP_PFE_PFE_CTL_PFE_SIZE (0xfL<<4) +#define BNX2_RXP_PFE_PFE_CTL_PFE_SIZE_0 (0L<<4) +#define BNX2_RXP_PFE_PFE_CTL_PFE_SIZE_1 (1L<<4) +#define BNX2_RXP_PFE_PFE_CTL_PFE_SIZE_2 (2L<<4) +#define BNX2_RXP_PFE_PFE_CTL_PFE_SIZE_3 (3L<<4) +#define BNX2_RXP_PFE_PFE_CTL_PFE_SIZE_4 (4L<<4) +#define BNX2_RXP_PFE_PFE_CTL_PFE_SIZE_5 (5L<<4) +#define BNX2_RXP_PFE_PFE_CTL_PFE_SIZE_6 (6L<<4) +#define BNX2_RXP_PFE_PFE_CTL_PFE_SIZE_7 (7L<<4) +#define BNX2_RXP_PFE_PFE_CTL_PFE_SIZE_8 (8L<<4) +#define BNX2_RXP_PFE_PFE_CTL_PFE_SIZE_9 (9L<<4) +#define BNX2_RXP_PFE_PFE_CTL_PFE_SIZE_10 (10L<<4) +#define BNX2_RXP_PFE_PFE_CTL_PFE_SIZE_11 (11L<<4) +#define BNX2_RXP_PFE_PFE_CTL_PFE_SIZE_12 (12L<<4) +#define BNX2_RXP_PFE_PFE_CTL_PFE_SIZE_13 (13L<<4) +#define BNX2_RXP_PFE_PFE_CTL_PFE_SIZE_14 (14L<<4) +#define BNX2_RXP_PFE_PFE_CTL_PFE_SIZE_15 (15L<<4) +#define BNX2_RXP_PFE_PFE_CTL_PFE_COUNT (0xfL<<12) +#define BNX2_RXP_PFE_PFE_CTL_OFFSET (0x1ffL<<16) + +#define BNX2_RXP_RXPCQ 0x000c5380 #define BNX2_RXP_CFTQ_CMD 0x000c53b8 #define BNX2_RXP_CFTQ_CMD_OFFSET (0x3ffL<<0) #define BNX2_RXP_CFTQ_CMD_WR_TOP (1L<<10) @@ -3322,7 +5762,7 @@ struct l2_fhdr { #define BNX2_RXP_CFTQ_CTL_MAX_DEPTH (0x3ffL<<12) #define BNX2_RXP_CFTQ_CTL_CUR_DEPTH (0x3ffL<<22) -#define BNX2_RXP_FTQ_DATA 0x000c53c0 +#define BNX2_RXP_RXPQ 0x000c53c0 #define BNX2_RXP_FTQ_CMD 0x000c53f8 #define BNX2_RXP_FTQ_CMD_OFFSET (0x3ffL<<0) #define BNX2_RXP_FTQ_CMD_WR_TOP (1L<<10) @@ -3350,6 +5790,10 @@ struct l2_fhdr { * com_reg definition * offset: 0x100000 */ +#define BNX2_COM_CKSUM_ERROR_STATUS 0x00100000 +#define BNX2_COM_CKSUM_ERROR_STATUS_CALCULATED (0xffffL<<0) +#define BNX2_COM_CKSUM_ERROR_STATUS_EXPECTED (0xffffL<<16) + #define BNX2_COM_CPU_MODE 0x00105000 #define BNX2_COM_CPU_MODE_LOCAL_RST (1L<<0) #define BNX2_COM_CPU_MODE_STEP_ENA (1L<<1) @@ -3369,7 +5813,7 @@ struct l2_fhdr { #define BNX2_COM_CPU_STATE_PAGE_0_DATA_HALTED (1L<<3) #define BNX2_COM_CPU_STATE_PAGE_0_INST_HALTED (1L<<4) #define BNX2_COM_CPU_STATE_BAD_DATA_ADDR_HALTED (1L<<5) -#define BNX2_COM_CPU_STATE_BAD_pc_HALTED (1L<<6) +#define BNX2_COM_CPU_STATE_BAD_PC_HALTED (1L<<6) #define BNX2_COM_CPU_STATE_ALIGN_HALTED (1L<<7) #define BNX2_COM_CPU_STATE_FIO_ABORT_HALTED (1L<<8) #define BNX2_COM_CPU_STATE_SOFT_HALTED (1L<<10) @@ -3417,7 +5861,29 @@ struct l2_fhdr { #define BNX2_COM_CPU_LAST_BRANCH_ADDR_LBA (0x3fffffffL<<2) #define BNX2_COM_CPU_REG_FILE 0x00105200 -#define BNX2_COM_COMXQ_FTQ_DATA 0x00105340 +#define BNX2_COM_COMTQ_PFE_PFE_CTL 0x001052bc +#define BNX2_COM_COMTQ_PFE_PFE_CTL_INC_USAGE_CNT (1L<<0) +#define BNX2_COM_COMTQ_PFE_PFE_CTL_PFE_SIZE (0xfL<<4) +#define BNX2_COM_COMTQ_PFE_PFE_CTL_PFE_SIZE_0 (0L<<4) +#define BNX2_COM_COMTQ_PFE_PFE_CTL_PFE_SIZE_1 (1L<<4) +#define BNX2_COM_COMTQ_PFE_PFE_CTL_PFE_SIZE_2 (2L<<4) +#define BNX2_COM_COMTQ_PFE_PFE_CTL_PFE_SIZE_3 (3L<<4) +#define BNX2_COM_COMTQ_PFE_PFE_CTL_PFE_SIZE_4 (4L<<4) +#define BNX2_COM_COMTQ_PFE_PFE_CTL_PFE_SIZE_5 (5L<<4) +#define BNX2_COM_COMTQ_PFE_PFE_CTL_PFE_SIZE_6 (6L<<4) +#define BNX2_COM_COMTQ_PFE_PFE_CTL_PFE_SIZE_7 (7L<<4) +#define BNX2_COM_COMTQ_PFE_PFE_CTL_PFE_SIZE_8 (8L<<4) +#define BNX2_COM_COMTQ_PFE_PFE_CTL_PFE_SIZE_9 (9L<<4) +#define BNX2_COM_COMTQ_PFE_PFE_CTL_PFE_SIZE_10 (10L<<4) +#define BNX2_COM_COMTQ_PFE_PFE_CTL_PFE_SIZE_11 (11L<<4) +#define BNX2_COM_COMTQ_PFE_PFE_CTL_PFE_SIZE_12 (12L<<4) +#define BNX2_COM_COMTQ_PFE_PFE_CTL_PFE_SIZE_13 (13L<<4) +#define BNX2_COM_COMTQ_PFE_PFE_CTL_PFE_SIZE_14 (14L<<4) +#define BNX2_COM_COMTQ_PFE_PFE_CTL_PFE_SIZE_15 (15L<<4) +#define BNX2_COM_COMTQ_PFE_PFE_CTL_PFE_COUNT (0xfL<<12) +#define BNX2_COM_COMTQ_PFE_PFE_CTL_OFFSET (0x1ffL<<16) + +#define BNX2_COM_COMXQ 0x00105340 #define BNX2_COM_COMXQ_FTQ_CMD 0x00105378 #define BNX2_COM_COMXQ_FTQ_CMD_OFFSET (0x3ffL<<0) #define BNX2_COM_COMXQ_FTQ_CMD_WR_TOP (1L<<10) @@ -3438,7 +5904,7 @@ struct l2_fhdr { #define BNX2_COM_COMXQ_FTQ_CTL_MAX_DEPTH (0x3ffL<<12) #define BNX2_COM_COMXQ_FTQ_CTL_CUR_DEPTH (0x3ffL<<22) -#define BNX2_COM_COMTQ_FTQ_DATA 0x00105380 +#define BNX2_COM_COMTQ 0x00105380 #define BNX2_COM_COMTQ_FTQ_CMD 0x001053b8 #define BNX2_COM_COMTQ_FTQ_CMD_OFFSET (0x3ffL<<0) #define BNX2_COM_COMTQ_FTQ_CMD_WR_TOP (1L<<10) @@ -3459,7 +5925,7 @@ struct l2_fhdr { #define BNX2_COM_COMTQ_FTQ_CTL_MAX_DEPTH (0x3ffL<<12) #define BNX2_COM_COMTQ_FTQ_CTL_CUR_DEPTH (0x3ffL<<22) -#define BNX2_COM_COMQ_FTQ_DATA 0x001053c0 +#define BNX2_COM_COMQ 0x001053c0 #define BNX2_COM_COMQ_FTQ_CMD 0x001053f8 #define BNX2_COM_COMQ_FTQ_CMD_OFFSET (0x3ffL<<0) #define BNX2_COM_COMQ_FTQ_CMD_WR_TOP (1L<<10) @@ -3489,6 +5955,10 @@ struct l2_fhdr { * cp_reg definition * offset: 0x180000 */ +#define BNX2_CP_CKSUM_ERROR_STATUS 0x00180000 +#define BNX2_CP_CKSUM_ERROR_STATUS_CALCULATED (0xffffL<<0) +#define BNX2_CP_CKSUM_ERROR_STATUS_EXPECTED (0xffffL<<16) + #define BNX2_CP_CPU_MODE 0x00185000 #define BNX2_CP_CPU_MODE_LOCAL_RST (1L<<0) #define BNX2_CP_CPU_MODE_STEP_ENA (1L<<1) @@ -3508,7 +5978,7 @@ struct l2_fhdr { #define BNX2_CP_CPU_STATE_PAGE_0_DATA_HALTED (1L<<3) #define BNX2_CP_CPU_STATE_PAGE_0_INST_HALTED (1L<<4) #define BNX2_CP_CPU_STATE_BAD_DATA_ADDR_HALTED (1L<<5) -#define BNX2_CP_CPU_STATE_BAD_pc_HALTED (1L<<6) +#define BNX2_CP_CPU_STATE_BAD_PC_HALTED (1L<<6) #define BNX2_CP_CPU_STATE_ALIGN_HALTED (1L<<7) #define BNX2_CP_CPU_STATE_FIO_ABORT_HALTED (1L<<8) #define BNX2_CP_CPU_STATE_SOFT_HALTED (1L<<10) @@ -3556,7 +6026,29 @@ struct l2_fhdr { #define BNX2_CP_CPU_LAST_BRANCH_ADDR_LBA (0x3fffffffL<<2) #define BNX2_CP_CPU_REG_FILE 0x00185200 -#define BNX2_CP_CPQ_FTQ_DATA 0x001853c0 +#define BNX2_CP_CPQ_PFE_PFE_CTL 0x001853bc +#define BNX2_CP_CPQ_PFE_PFE_CTL_INC_USAGE_CNT (1L<<0) +#define BNX2_CP_CPQ_PFE_PFE_CTL_PFE_SIZE (0xfL<<4) +#define BNX2_CP_CPQ_PFE_PFE_CTL_PFE_SIZE_0 (0L<<4) +#define BNX2_CP_CPQ_PFE_PFE_CTL_PFE_SIZE_1 (1L<<4) +#define BNX2_CP_CPQ_PFE_PFE_CTL_PFE_SIZE_2 (2L<<4) +#define BNX2_CP_CPQ_PFE_PFE_CTL_PFE_SIZE_3 (3L<<4) +#define BNX2_CP_CPQ_PFE_PFE_CTL_PFE_SIZE_4 (4L<<4) +#define BNX2_CP_CPQ_PFE_PFE_CTL_PFE_SIZE_5 (5L<<4) +#define BNX2_CP_CPQ_PFE_PFE_CTL_PFE_SIZE_6 (6L<<4) +#define BNX2_CP_CPQ_PFE_PFE_CTL_PFE_SIZE_7 (7L<<4) +#define BNX2_CP_CPQ_PFE_PFE_CTL_PFE_SIZE_8 (8L<<4) +#define BNX2_CP_CPQ_PFE_PFE_CTL_PFE_SIZE_9 (9L<<4) +#define BNX2_CP_CPQ_PFE_PFE_CTL_PFE_SIZE_10 (10L<<4) +#define BNX2_CP_CPQ_PFE_PFE_CTL_PFE_SIZE_11 (11L<<4) +#define BNX2_CP_CPQ_PFE_PFE_CTL_PFE_SIZE_12 (12L<<4) +#define BNX2_CP_CPQ_PFE_PFE_CTL_PFE_SIZE_13 (13L<<4) +#define BNX2_CP_CPQ_PFE_PFE_CTL_PFE_SIZE_14 (14L<<4) +#define BNX2_CP_CPQ_PFE_PFE_CTL_PFE_SIZE_15 (15L<<4) +#define BNX2_CP_CPQ_PFE_PFE_CTL_PFE_COUNT (0xfL<<12) +#define BNX2_CP_CPQ_PFE_PFE_CTL_OFFSET (0x1ffL<<16) + +#define BNX2_CP_CPQ 0x001853c0 #define BNX2_CP_CPQ_FTQ_CMD 0x001853f8 #define BNX2_CP_CPQ_FTQ_CMD_OFFSET (0x3ffL<<0) #define BNX2_CP_CPQ_FTQ_CMD_WR_TOP (1L<<10) @@ -3584,6 +6076,59 @@ struct l2_fhdr { * mcp_reg definition * offset: 0x140000 */ +#define BNX2_MCP_MCP_CONTROL 0x00140080 +#define BNX2_MCP_MCP_CONTROL_SMBUS_SEL (1L<<30) +#define BNX2_MCP_MCP_CONTROL_MCP_ISOLATE (1L<<31) + +#define BNX2_MCP_MCP_ATTENTION_STATUS 0x00140084 +#define BNX2_MCP_MCP_ATTENTION_STATUS_DRV_DOORBELL (1L<<29) +#define BNX2_MCP_MCP_ATTENTION_STATUS_WATCHDOG_TIMEOUT (1L<<30) +#define BNX2_MCP_MCP_ATTENTION_STATUS_CPU_EVENT (1L<<31) + +#define BNX2_MCP_MCP_HEARTBEAT_CONTROL 0x00140088 +#define BNX2_MCP_MCP_HEARTBEAT_CONTROL_MCP_HEARTBEAT_ENABLE (1L<<31) + +#define BNX2_MCP_MCP_HEARTBEAT_STATUS 0x0014008c +#define BNX2_MCP_MCP_HEARTBEAT_STATUS_MCP_HEARTBEAT_PERIOD (0x7ffL<<0) +#define BNX2_MCP_MCP_HEARTBEAT_STATUS_VALID (1L<<31) + +#define BNX2_MCP_MCP_HEARTBEAT 0x00140090 +#define BNX2_MCP_MCP_HEARTBEAT_MCP_HEARTBEAT_COUNT (0x3fffffffL<<0) +#define BNX2_MCP_MCP_HEARTBEAT_MCP_HEARTBEAT_INC (1L<<30) +#define BNX2_MCP_MCP_HEARTBEAT_MCP_HEARTBEAT_RESET (1L<<31) + +#define BNX2_MCP_WATCHDOG_RESET 0x00140094 +#define BNX2_MCP_WATCHDOG_RESET_WATCHDOG_RESET (1L<<31) + +#define BNX2_MCP_WATCHDOG_CONTROL 0x00140098 +#define BNX2_MCP_WATCHDOG_CONTROL_WATCHDOG_TIMEOUT (0xfffffffL<<0) +#define BNX2_MCP_WATCHDOG_CONTROL_WATCHDOG_ATTN (1L<<29) +#define BNX2_MCP_WATCHDOG_CONTROL_MCP_RST_ENABLE (1L<<30) +#define BNX2_MCP_WATCHDOG_CONTROL_WATCHDOG_ENABLE (1L<<31) + +#define BNX2_MCP_ACCESS_LOCK 0x0014009c +#define BNX2_MCP_ACCESS_LOCK_LOCK (1L<<31) + +#define BNX2_MCP_TOE_ID 0x001400a0 +#define BNX2_MCP_TOE_ID_FUNCTION_ID (1L<<31) + +#define BNX2_MCP_MAILBOX_CFG 0x001400a4 +#define BNX2_MCP_MAILBOX_CFG_MAILBOX_OFFSET (0x3fffL<<0) +#define BNX2_MCP_MAILBOX_CFG_MAILBOX_SIZE (0xfffL<<20) + +#define BNX2_MCP_MAILBOX_CFG_OTHER_FUNC 0x001400a8 +#define BNX2_MCP_MAILBOX_CFG_OTHER_FUNC_MAILBOX_OFFSET (0x3fffL<<0) +#define BNX2_MCP_MAILBOX_CFG_OTHER_FUNC_MAILBOX_SIZE (0xfffL<<20) + +#define BNX2_MCP_MCP_DOORBELL 0x001400ac +#define BNX2_MCP_MCP_DOORBELL_MCP_DOORBELL (1L<<31) + +#define BNX2_MCP_DRIVER_DOORBELL 0x001400b0 +#define BNX2_MCP_DRIVER_DOORBELL_DRIVER_DOORBELL (1L<<31) + +#define BNX2_MCP_DRIVER_DOORBELL_OTHER_FUNC 0x001400b4 +#define BNX2_MCP_DRIVER_DOORBELL_OTHER_FUNC_DRIVER_DOORBELL (1L<<31) + #define BNX2_MCP_CPU_MODE 0x00145000 #define BNX2_MCP_CPU_MODE_LOCAL_RST (1L<<0) #define BNX2_MCP_CPU_MODE_STEP_ENA (1L<<1) @@ -3603,7 +6148,7 @@ struct l2_fhdr { #define BNX2_MCP_CPU_STATE_PAGE_0_DATA_HALTED (1L<<3) #define BNX2_MCP_CPU_STATE_PAGE_0_INST_HALTED (1L<<4) #define BNX2_MCP_CPU_STATE_BAD_DATA_ADDR_HALTED (1L<<5) -#define BNX2_MCP_CPU_STATE_BAD_pc_HALTED (1L<<6) +#define BNX2_MCP_CPU_STATE_BAD_PC_HALTED (1L<<6) #define BNX2_MCP_CPU_STATE_ALIGN_HALTED (1L<<7) #define BNX2_MCP_CPU_STATE_FIO_ABORT_HALTED (1L<<8) #define BNX2_MCP_CPU_STATE_SOFT_HALTED (1L<<10) @@ -3651,7 +6196,7 @@ struct l2_fhdr { #define BNX2_MCP_CPU_LAST_BRANCH_ADDR_LBA (0x3fffffffL<<2) #define BNX2_MCP_CPU_REG_FILE 0x00145200 -#define BNX2_MCP_MCPQ_FTQ_DATA 0x001453c0 +#define BNX2_MCP_MCPQ 0x001453c0 #define BNX2_MCP_MCPQ_FTQ_CMD 0x001453f8 #define BNX2_MCP_MCPQ_FTQ_CMD_OFFSET (0x3ffL<<0) #define BNX2_MCP_MCPQ_FTQ_CMD_WR_TOP (1L<<10) @@ -3696,6 +6241,8 @@ struct l2_fhdr { /* 5708 Serdes PHY registers */ +#define BCM5708S_BMCR_FORCE_2500 0x20 + #define BCM5708S_UP1 0xb #define BCM5708S_UP1_2G5 0x1 @@ -3804,6 +6351,7 @@ struct l2_fhdr { #define INVALID_CID_ADDR 0xffffffff #define TX_CID 16 +#define TX_TSS_CID 32 #define RX_CID 0 #define MB_TX_CID_ADDR MB_GET_CID_ADDR(TX_CID) @@ -3889,6 +6437,8 @@ struct bnx2 { u32 tx_prod_bseq __attribute__((aligned(L1_CACHE_BYTES))); u16 tx_prod; + u32 tx_bidx_addr; + u32 tx_bseq_addr; u16 tx_cons __attribute__((aligned(L1_CACHE_BYTES))); u16 hw_tx_cons; @@ -3945,6 +6495,7 @@ struct bnx2 { #define CHIP_NUM(bp) (((bp)->chip_id) & 0xffff0000) #define CHIP_NUM_5706 0x57060000 #define CHIP_NUM_5708 0x57080000 +#define CHIP_NUM_5709 0x57090000 #define CHIP_REV(bp) (((bp)->chip_id) & 0x0000f000) #define CHIP_REV_Ax 0x00000000 @@ -4007,6 +6558,10 @@ struct bnx2 { struct statistics_block *stats_blk; dma_addr_t stats_blk_mapping; + int ctx_pages; + void *ctx_blk[4]; + dma_addr_t ctx_blk_mapping[4]; + u32 hc_cmd; u32 rx_mode; @@ -4038,6 +6593,7 @@ struct bnx2 { u8 serdes_an_pending; #define SERDES_AN_TIMEOUT (HZ / 3) +#define SERDES_FORCED_TIMEOUT (HZ / 10) u8 mac_addr[8]; @@ -4104,41 +6660,43 @@ struct cpu_reg { }; struct fw_info { - u32 ver_major; - u32 ver_minor; - u32 ver_fix; + const u32 ver_major; + const u32 ver_minor; + const u32 ver_fix; - u32 start_addr; + const u32 start_addr; /* Text section. */ - u32 text_addr; - u32 text_len; - u32 text_index; + const u32 text_addr; + const u32 text_len; + const u32 text_index; u32 *text; + u8 *gz_text; + const u32 gz_text_len; /* Data section. */ - u32 data_addr; - u32 data_len; - u32 data_index; - u32 *data; + const u32 data_addr; + const u32 data_len; + const u32 data_index; + const u32 *data; /* SBSS section. */ - u32 sbss_addr; - u32 sbss_len; - u32 sbss_index; - u32 *sbss; + const u32 sbss_addr; + const u32 sbss_len; + const u32 sbss_index; + const u32 *sbss; /* BSS section. */ - u32 bss_addr; - u32 bss_len; - u32 bss_index; - u32 *bss; + const u32 bss_addr; + const u32 bss_len; + const u32 bss_index; + const u32 *bss; /* Read-only section. */ - u32 rodata_addr; - u32 rodata_len; - u32 rodata_index; - u32 *rodata; + const u32 rodata_addr; + const u32 rodata_len; + const u32 rodata_index; + const u32 *rodata; }; #define RV2P_PROC1 0 diff --git a/drivers/net/bnx2_fw.h b/drivers/net/bnx2_fw.h index 2d753dca0d7..21d368ff424 100644 --- a/drivers/net/bnx2_fw.h +++ b/drivers/net/bnx2_fw.h @@ -14,20 +14,6 @@ * accompanying it. */ -static const int bnx2_COM_b06FwReleaseMajor = 0x1; -static const int bnx2_COM_b06FwReleaseMinor = 0x0; -static const int bnx2_COM_b06FwReleaseFix = 0x0; -static const u32 bnx2_COM_b06FwStartAddr = 0x080008b4; -static const u32 bnx2_COM_b06FwTextAddr = 0x08000000; -static const int bnx2_COM_b06FwTextLen = 0x57bc; -static const u32 bnx2_COM_b06FwDataAddr = 0x08005840; -static const int bnx2_COM_b06FwDataLen = 0x0; -static const u32 bnx2_COM_b06FwRodataAddr = 0x080057c0; -static const int bnx2_COM_b06FwRodataLen = 0x58; -static const u32 bnx2_COM_b06FwBssAddr = 0x08005860; -static const int bnx2_COM_b06FwBssLen = 0x88; -static const u32 bnx2_COM_b06FwSbssAddr = 0x08005840; -static const int bnx2_COM_b06FwSbssLen = 0x1c; static u8 bnx2_COM_b06FwText[] = { 0x1f, 0x8b, 0x08, 0x08, 0x09, 0x83, 0x41, 0x44, 0x00, 0x03, 0x74, 0x65, 0x73, 0x74, 0x31, 0x2e, 0x62, 0x69, 0x6e, 0x00, 0xec, 0x5b, 0x7d, 0x6c, @@ -673,389 +659,752 @@ static u32 bnx2_COM_b06FwRodata[(0x58/4) + 1] = { static u32 bnx2_COM_b06FwBss[(0x88/4) + 1] = { 0x0 }; static u32 bnx2_COM_b06FwSbss[(0x1c/4) + 1] = { 0x0 }; -static int bnx2_RXP_b06FwReleaseMajor = 0x1; -static int bnx2_RXP_b06FwReleaseMinor = 0x0; -static int bnx2_RXP_b06FwReleaseFix = 0x0; -static u32 bnx2_RXP_b06FwStartAddr = 0x08003184; -static u32 bnx2_RXP_b06FwTextAddr = 0x08000000; -static int bnx2_RXP_b06FwTextLen = 0x588c; -static u32 bnx2_RXP_b06FwDataAddr = 0x080058e0; -static int bnx2_RXP_b06FwDataLen = 0x0; -static u32 bnx2_RXP_b06FwRodataAddr = 0x08005890; -static int bnx2_RXP_b06FwRodataLen = 0x28; -static u32 bnx2_RXP_b06FwBssAddr = 0x08005900; -static int bnx2_RXP_b06FwBssLen = 0x13a4; -static u32 bnx2_RXP_b06FwSbssAddr = 0x080058e0; -static int bnx2_RXP_b06FwSbssLen = 0x1c; +static struct fw_info bnx2_com_fw_06 = { + .ver_major = 0x1, + .ver_minor = 0x0, + .ver_fix = 0x0, + + .start_addr = 0x080008b4, + + .text_addr = 0x08000000, + .text_len = 0x57bc, + .text_index = 0x0, + .gz_text = bnx2_COM_b06FwText, + .gz_text_len = sizeof(bnx2_COM_b06FwText), + + .data_addr = 0x08005840, + .data_len = 0x0, + .data_index = 0x0, + .data = bnx2_COM_b06FwData, + + .sbss_addr = 0x08005840, + .sbss_len = 0x1c, + .sbss_index = 0x0, + .sbss = bnx2_COM_b06FwSbss, + + .bss_addr = 0x08005860, + .bss_len = 0x88, + .bss_index = 0x0, + .bss = bnx2_COM_b06FwBss, + + .rodata_addr = 0x080057c0, + .rodata_len = 0x58, + .rodata_index = 0x0, + .rodata = bnx2_COM_b06FwRodata, +}; + static u8 bnx2_RXP_b06FwText[] = { - 0x1f, 0x8b, 0x08, 0x08, 0x07, 0x87, 0x41, 0x44, 0x00, 0x03, 0x74, 0x65, - 0x73, 0x74, 0x31, 0x2e, 0x62, 0x69, 0x6e, 0x00, 0xed, 0x5c, 0x5d, 0x6c, - 0x1c, 0xd7, 0x75, 0x3e, 0xf3, 0x43, 0x71, 0x49, 0x91, 0xd4, 0x70, 0xb9, - 0x62, 0x57, 0x12, 0x65, 0xed, 0x8a, 0x43, 0x71, 0x6d, 0x31, 0xce, 0x50, - 0x58, 0xdb, 0x82, 0xb1, 0x48, 0xc7, 0xb3, 0xa4, 0xc8, 0x24, 0x02, 0x42, - 0x1b, 0x42, 0xab, 0xa4, 0xa9, 0xc1, 0x90, 0x72, 0x91, 0x22, 0x2c, 0xa0, - 0x1a, 0x79, 0xf0, 0x43, 0x10, 0x2f, 0x56, 0x3f, 0xa6, 0xd1, 0x8d, 0x96, - 0xb6, 0x1c, 0x53, 0x08, 0x82, 0x82, 0xe5, 0x52, 0x52, 0x0b, 0x2c, 0xb4, - 0x96, 0xed, 0x36, 0x7e, 0xa8, 0x23, 0x9a, 0x92, 0x8d, 0xa6, 0x68, 0x81, - 0x22, 0xad, 0xd1, 0xf4, 0x4d, 0x95, 0x9a, 0x4a, 0x75, 0x5f, 0xd4, 0xa2, - 0x48, 0xda, 0x46, 0xcd, 0xf4, 0xfb, 0xee, 0xcc, 0x88, 0xd4, 0x9a, 0xb2, - 0x2c, 0x3b, 0x0d, 0x62, 0x74, 0x0e, 0x30, 0xd8, 0xb9, 0x7f, 0xe7, 0xef, - 0x9e, 0x73, 0xee, 0x39, 0x77, 0x28, 0x7d, 0xa5, 0x43, 0xda, 0x25, 0x84, - 0x4e, 0x3c, 0x99, 0xc3, 0xcf, 0x3c, 0xfd, 0xe0, 0xc3, 0x0f, 0xee, 0xc1, - 0xeb, 0xb0, 0xa1, 0x6d, 0xd0, 0xa3, 0xfe, 0x18, 0x62, 0x88, 0x21, 0x86, - 0x18, 0x62, 0x88, 0x21, 0x86, 0x18, 0x62, 0x88, 0x21, 0x86, 0x18, 0x62, - 0x88, 0x21, 0x86, 0x18, 0x62, 0x88, 0x21, 0x86, 0x18, 0x62, 0x88, 0x21, - 0x86, 0x18, 0x62, 0x88, 0x21, 0x86, 0x18, 0x62, 0x88, 0x21, 0x86, 0x18, - 0x62, 0x88, 0x21, 0x86, 0x18, 0x62, 0x88, 0x21, 0x86, 0x18, 0x62, 0x88, - 0x21, 0x86, 0x18, 0x62, 0x88, 0x21, 0x86, 0xff, 0xef, 0x60, 0x88, 0x58, - 0xfc, 0xed, 0x0c, 0x1f, 0x49, 0xe8, 0x85, 0xcb, 0x07, 0x3d, 0x5b, 0x12, - 0x46, 0x61, 0x69, 0x66, 0xda, 0x16, 0x71, 0xeb, 0xbb, 0x33, 0x45, 0xf9, - 0x1f, 0xbf, 0x94, 0x32, 0x85, 0xfd, 0xdb, 0x0b, 0x37, 0x9f, 0x7d, 0xf3, - 0x91, 0xec, 0x8d, 0x05, 0x43, 0x12, 0x56, 0xe1, 0xe8, 0xb0, 0xb5, 0x4b, - 0x12, 0x7d, 0x58, 0xf3, 0xdd, 0xc1, 0xcf, 0x59, 0xd2, 0x15, 0xe1, 0xba, - 0xee, 0xbf, 0x39, 0x68, 0xc9, 0x2b, 0x8d, 0x94, 0x5c, 0x68, 0x6c, 0xdf, - 0x24, 0x5d, 0xd9, 0x52, 0x09, 0xfd, 0x6e, 0x8a, 0xe3, 0x96, 0x94, 0xab, - 0x2d, 0xe2, 0x2a, 0xba, 0x7d, 0x5a, 0x71, 0xfe, 0x3e, 0xcd, 0x9b, 0x7f, - 0x9e, 0xff, 0x1e, 0x24, 0xa5, 0xcb, 0x7d, 0x68, 0xf7, 0xa1, 0xcd, 0xf7, - 0x81, 0xf4, 0x94, 0x98, 0x72, 0xa4, 0x91, 0x90, 0xa3, 0xd5, 0x8c, 0xe8, - 0x05, 0x71, 0xbd, 0xbc, 0x9d, 0x2e, 0xa3, 0x6f, 0xea, 0x00, 0xdb, 0x29, - 0xe0, 0xf9, 0x0e, 0xd7, 0x59, 0x5e, 0x5e, 0x4a, 0xb7, 0xc6, 0x14, 0x0d, - 0x8e, 0xb1, 0x0f, 0xbf, 0x58, 0x5f, 0xae, 0x76, 0x00, 0x6f, 0xd6, 0x71, - 0x41, 0xdc, 0x73, 0x2c, 0xd0, 0xf6, 0xfd, 0xdf, 0x75, 0x32, 0xb2, 0xe2, - 0x74, 0x81, 0xa7, 0x16, 0x69, 0xb5, 0xc5, 0xd2, 0x0b, 0xb6, 0xb5, 0x22, - 0x6d, 0x1c, 0xeb, 0x34, 0x0a, 0xbe, 0x3f, 0x9d, 0x97, 0xae, 0xa0, 0x6f, - 0xb7, 0xe2, 0x63, 0x72, 0x42, 0xc3, 0xbc, 0x57, 0x49, 0x0f, 0x3a, 0xe2, - 0x3b, 0x7f, 0xf3, 0x52, 0xac, 0x6c, 0x97, 0xc9, 0x54, 0xf6, 0xa0, 0x1b, - 0xd0, 0x74, 0x3d, 0x67, 0x2b, 0x70, 0x6a, 0xe0, 0x4f, 0xdb, 0x81, 0xf5, - 0xee, 0x0a, 0x68, 0x1a, 0x85, 0xcd, 0x62, 0x6c, 0x66, 0x9f, 0xe8, 0x3b, - 0x87, 0x93, 0xe1, 0x78, 0x97, 0x36, 0x32, 0x6f, 0x88, 0x6e, 0xff, 0x81, - 0xe6, 0xd5, 0x7a, 0xe5, 0xd8, 0xbc, 0x8e, 0x77, 0x5d, 0xae, 0xe6, 0x4b, - 0x9a, 0xdb, 0xa8, 0x68, 0xde, 0xd9, 0x59, 0xad, 0x78, 0xd6, 0x94, 0xa3, - 0xb6, 0x7f, 0xe1, 0xb4, 0x73, 0x42, 0x1b, 0x39, 0x7b, 0x46, 0x1b, 0x3d, - 0xfb, 0x86, 0x36, 0xde, 0xd8, 0xb2, 0x49, 0xda, 0xb3, 0xd0, 0x1e, 0x71, - 0x90, 0xbf, 0x4f, 0x87, 0xba, 0xec, 0xa2, 0xde, 0x4a, 0xe4, 0x7d, 0x9f, - 0xf3, 0x86, 0xe6, 0x55, 0x6d, 0x8b, 0xfb, 0xe6, 0xa6, 0x22, 0x1a, 0xed, - 0x72, 0x74, 0xde, 0x94, 0x63, 0xd5, 0x94, 0x3c, 0x57, 0x2d, 0x29, 0x5a, - 0x86, 0x5d, 0xd2, 0xbc, 0x06, 0xc7, 0x2b, 0xa0, 0x75, 0x42, 0xdb, 0x07, - 0x9a, 0xde, 0x59, 0x29, 0x5d, 0x71, 0xe6, 0x40, 0xaf, 0x03, 0x78, 0xff, - 0x58, 0x1b, 0x6d, 0xf4, 0x6a, 0xde, 0xc9, 0x9b, 0xe2, 0x39, 0x59, 0xeb, - 0x4b, 0x62, 0xba, 0xb0, 0x01, 0xc8, 0x0c, 0xfd, 0x38, 0xd0, 0x49, 0xca, - 0xf7, 0xf5, 0x82, 0xff, 0x2c, 0x74, 0x6f, 0x5d, 0xa1, 0xfc, 0x8d, 0x5e, - 0x29, 0xcf, 0x53, 0xd7, 0xa6, 0x36, 0x52, 0xf5, 0x2f, 0x78, 0x8e, 0xf4, - 0x19, 0xe2, 0xfb, 0x47, 0x9d, 0x81, 0xf4, 0x21, 0x39, 0x03, 0xdc, 0x75, - 0xad, 0xd8, 0xa0, 0xae, 0xc1, 0xdf, 0x2d, 0x39, 0x02, 0xbd, 0x15, 0x9d, - 0x5e, 0x99, 0xb4, 0xb2, 0x2e, 0xf6, 0x68, 0x53, 0x20, 0x57, 0x32, 0xb4, - 0x17, 0xd2, 0xe7, 0xde, 0x67, 0xd3, 0x9e, 0xa1, 0xcb, 0x53, 0x2f, 0x3d, - 0xdf, 0xb3, 0x38, 0xb4, 0x91, 0x32, 0x43, 0xff, 0xf2, 0x45, 0xcf, 0xf6, - 0xb6, 0xb4, 0x48, 0x29, 0x6d, 0x48, 0x16, 0xfb, 0xb4, 0x43, 0x4e, 0x3b, - 0x22, 0x87, 0x2a, 0xd0, 0x8d, 0x6d, 0x5a, 0x8b, 0x62, 0x67, 0xca, 0x32, - 0x50, 0x32, 0x75, 0x74, 0x26, 0x49, 0x97, 0x3a, 0xd2, 0xe5, 0x7a, 0x9e, - 0x7a, 0xa2, 0x3d, 0x7f, 0x28, 0x5d, 0x69, 0xab, 0xba, 0x5a, 0xd5, 0xd3, - 0xf8, 0x2f, 0x5d, 0x4f, 0xd4, 0xc9, 0x72, 0x28, 0xb7, 0x03, 0xdc, 0x8f, - 0x40, 0x5f, 0xe2, 0xea, 0xc3, 0x0f, 0xb1, 0x6f, 0x93, 0x51, 0xb0, 0xd3, - 0x17, 0x61, 0x14, 0x7a, 0x61, 0x37, 0x64, 0x19, 0xa6, 0xee, 0xe0, 0xc3, - 0x1f, 0x49, 0x5e, 0xf9, 0xd5, 0x90, 0x97, 0xfc, 0xdb, 0x32, 0x55, 0x49, - 0x80, 0x06, 0x65, 0xd4, 0xe5, 0xbd, 0x7c, 0x64, 0x1b, 0x7b, 0x20, 0x5f, - 0x5e, 0xa6, 0xbe, 0x45, 0x7f, 0xa2, 0xfd, 0xf3, 0x9d, 0xb2, 0xfe, 0xcc, - 0xbf, 0xee, 0x7c, 0x92, 0xf6, 0x96, 0x7c, 0x27, 0xe4, 0x78, 0x35, 0xc9, - 0x3d, 0xd4, 0x56, 0x54, 0x6c, 0x8a, 0x64, 0x14, 0xdd, 0x28, 0x74, 0x48, - 0x51, 0xed, 0xf7, 0x5e, 0xd0, 0x43, 0x2c, 0xa8, 0xf2, 0xbd, 0xa0, 0x64, - 0x9b, 0xb6, 0xed, 0xcc, 0x11, 0xc9, 0xc2, 0xbe, 0x45, 0x8e, 0xcc, 0x99, - 0x32, 0x6d, 0xff, 0x63, 0xa7, 0xb4, 0x2f, 0xdf, 0x6f, 0xa8, 0xb8, 0xae, - 0xf7, 0x6e, 0x90, 0x4d, 0xe0, 0x77, 0xf9, 0x7e, 0x5d, 0xe4, 0xa6, 0x59, - 0xc8, 0x5a, 0x23, 0x08, 0xf6, 0x46, 0x81, 0xb1, 0x4c, 0x43, 0x2c, 0x93, - 0x44, 0x8b, 0x4d, 0x7d, 0xf9, 0xfe, 0xf8, 0xf0, 0xdd, 0xf5, 0x75, 0x64, - 0x9e, 0xb4, 0xa9, 0x2f, 0xc6, 0xa8, 0x12, 0xf4, 0xc1, 0xf8, 0x74, 0xbb, - 0xae, 0x8a, 0xa1, 0xae, 0x46, 0xfe, 0xef, 0xed, 0xc2, 0xf5, 0xaa, 0xa2, - 0x79, 0xce, 0xbb, 0xa1, 0x2f, 0xd8, 0x32, 0x02, 0x7f, 0x37, 0xec, 0x4f, - 0xcb, 0x91, 0x54, 0x76, 0xc2, 0x95, 0xc0, 0xe6, 0xaf, 0xad, 0xb1, 0xf9, - 0xd1, 0xbb, 0xc8, 0x75, 0x3c, 0x94, 0xcb, 0x0d, 0xe5, 0x1a, 0x85, 0x5c, - 0x63, 0x90, 0x6b, 0xe5, 0x23, 0xc8, 0xb5, 0xf2, 0x91, 0xe5, 0xd2, 0xa4, - 0xec, 0x3c, 0x08, 0x5a, 0xa6, 0xfc, 0xab, 0x13, 0xd8, 0xf2, 0xbf, 0x38, - 0x9f, 0x14, 0x19, 0x7c, 0x7f, 0x70, 0xd8, 0x16, 0xef, 0x5b, 0xe0, 0xd5, - 0x71, 0x40, 0x8b, 0xef, 0xef, 0x97, 0xe1, 0x6e, 0xfe, 0x38, 0x8b, 0x7d, - 0x5d, 0xcf, 0x1f, 0x29, 0x87, 0x3e, 0x7c, 0xef, 0xfe, 0xa8, 0x6b, 0x1f, - 0x55, 0x0e, 0xc6, 0x9c, 0x4f, 0x35, 0x9d, 0xab, 0x1f, 0x56, 0x86, 0xf5, - 0x63, 0xca, 0x2f, 0x4f, 0x86, 0xc7, 0x64, 0x72, 0x33, 0xed, 0xa9, 0xa4, - 0x8d, 0x0c, 0x92, 0xef, 0xb5, 0xfc, 0x4a, 0x26, 0xe0, 0x0d, 0x39, 0xd1, - 0xd2, 0x46, 0x39, 0xb2, 0x60, 0x49, 0x69, 0xe9, 0x4e, 0x71, 0x57, 0x03, - 0x6f, 0xb4, 0x47, 0xf6, 0x7d, 0xd2, 0x7c, 0x2a, 0xc8, 0x2b, 0x2e, 0x54, - 0x91, 0x83, 0x56, 0x13, 0x72, 0xd9, 0x48, 0xcb, 0x9b, 0x83, 0x87, 0xe5, - 0xf3, 0xd5, 0x24, 0xe8, 0x31, 0x9f, 0x2c, 0xe7, 0x10, 0x17, 0xb5, 0xb2, - 0x63, 0x08, 0x79, 0xaf, 0xd9, 0x9c, 0x13, 0xc4, 0x96, 0x72, 0x10, 0x83, - 0x5d, 0x6f, 0x50, 0xe5, 0x14, 0x90, 0x4f, 0x64, 0x0c, 0xb1, 0xb7, 0x66, - 0xb3, 0xcd, 0xfe, 0xa0, 0xef, 0xb3, 0x95, 0x5e, 0xad, 0xc8, 0xbc, 0x64, - 0xf0, 0xa6, 0x4c, 0x3b, 0x41, 0xdf, 0xe7, 0x2a, 0xa3, 0x9b, 0x98, 0x1f, - 0x1a, 0x05, 0xc9, 0x94, 0x9d, 0xf7, 0x7c, 0xd7, 0xba, 0x7d, 0xcd, 0xfa, - 0x78, 0xb2, 0x13, 0x81, 0xce, 0x45, 0xfb, 0xaa, 0xad, 0xf7, 0xb6, 0x4a, - 0x09, 0x27, 0x5d, 0xd6, 0x1a, 0x47, 0xe7, 0xbe, 0x4a, 0x79, 0x5b, 0xab, - 0xdc, 0x34, 0x80, 0x3f, 0x6d, 0x68, 0x62, 0x1e, 0xaa, 0x94, 0xbb, 0xd9, - 0xa6, 0xbe, 0x74, 0x4d, 0x12, 0xa3, 0x15, 0x5f, 0xae, 0x3a, 0x41, 0xee, - 0x63, 0x68, 0x7a, 0x6f, 0x5b, 0xb8, 0x56, 0xd7, 0x76, 0x39, 0x97, 0x44, - 0x3a, 0x0e, 0x55, 0xc4, 0x2a, 0x56, 0x76, 0x39, 0x6f, 0x4b, 0xb9, 0xa7, - 0x6d, 0x75, 0x5d, 0x8a, 0xeb, 0x76, 0x0e, 0xaf, 0x9d, 0xbb, 0xcb, 0xb9, - 0x28, 0xe5, 0x2d, 0x6d, 0xab, 0xb4, 0xd2, 0x58, 0xdb, 0x17, 0xac, 0xe5, - 0xf8, 0x66, 0x71, 0xbb, 0x39, 0x47, 0xef, 0x6d, 0xbf, 0x45, 0x43, 0x32, - 0xc5, 0x4a, 0xb9, 0xa7, 0x7d, 0x15, 0xaf, 0x4d, 0xbc, 0xde, 0x1a, 0xbc, - 0xc4, 0xd9, 0xbe, 0x8a, 0x33, 0x07, 0x9c, 0x43, 0xab, 0x38, 0x39, 0x7e, - 0x58, 0x8a, 0x38, 0xd3, 0x5a, 0x0a, 0x32, 0xbc, 0x54, 0xc9, 0x48, 0x79, - 0x28, 0x01, 0xdd, 0xf7, 0x1f, 0xfc, 0x9a, 0xaa, 0x43, 0xcc, 0x61, 0x0f, - 0xba, 0x32, 0x55, 0x5e, 0x87, 0xd8, 0x08, 0xdb, 0xf8, 0x5a, 0x5d, 0x86, - 0x17, 0xeb, 0xa6, 0x1c, 0x6f, 0x70, 0xbf, 0x98, 0xe3, 0x05, 0x75, 0xc6, - 0x85, 0x46, 0x4e, 0xdb, 0x87, 0xbd, 0x66, 0x9d, 0xb0, 0xaf, 0x61, 0x6a, - 0xa3, 0x3c, 0x1f, 0x80, 0x97, 0x76, 0x7e, 0xac, 0x41, 0xdb, 0x79, 0x03, - 0xb6, 0x41, 0xce, 0xa3, 0x9c, 0xbd, 0x95, 0xb9, 0x53, 0x66, 0xd1, 0x51, - 0x75, 0x88, 0x56, 0xcb, 0x77, 0x20, 0x07, 0x4d, 0xa0, 0xd6, 0x80, 0xcd, - 0xdb, 0x78, 0x6f, 0x70, 0xde, 0x32, 0xe6, 0x6d, 0xe0, 0x3c, 0xec, 0xcd, - 0x25, 0xe5, 0x0f, 0xa6, 0xcd, 0xf1, 0x77, 0xb1, 0xc7, 0x68, 0xd7, 0x59, - 0x57, 0x58, 0x02, 0x5f, 0xc1, 0x3e, 0xa2, 0x6e, 0x48, 0xed, 0x60, 0x7e, - 0x8f, 0xb9, 0x19, 0xcc, 0xcd, 0x66, 0x18, 0xcf, 0x3d, 0xfb, 0x99, 0x0e, - 0xe9, 0x42, 0xbb, 0xce, 0x35, 0xd9, 0x0c, 0x72, 0x5b, 0xdf, 0xcb, 0xb7, - 0xc9, 0x4a, 0xca, 0xbf, 0x60, 0xd8, 0xd1, 0xdc, 0x08, 0x6f, 0xf3, 0x5c, - 0xe6, 0xc5, 0xc4, 0xbd, 0x21, 0xcc, 0x83, 0xc7, 0xc5, 0x6d, 0xfc, 0x49, - 0xb7, 0x74, 0xb9, 0xf8, 0x8d, 0xe6, 0x4c, 0x6f, 0x0e, 0x6a, 0x2e, 0xbe, - 0xb7, 0x50, 0x3e, 0x17, 0xe7, 0xa1, 0x56, 0xac, 0x66, 0x26, 0x59, 0x1f, - 0x15, 0xeb, 0x6c, 0xef, 0x85, 0x3f, 0x04, 0x75, 0xd7, 0x85, 0x5b, 0xbe, - 0x70, 0x19, 0x7a, 0x4b, 0x43, 0x6f, 0x29, 0x39, 0xdf, 0x60, 0x9d, 0xe6, - 0x42, 0x5f, 0x19, 0xf1, 0x1a, 0xe3, 0x58, 0x2b, 0x87, 0x81, 0x03, 0x3a, - 0x17, 0x47, 0x2f, 0x64, 0x65, 0xca, 0xda, 0x1d, 0xf1, 0x00, 0x5c, 0x88, - 0x1f, 0x85, 0x36, 0xf4, 0xf1, 0x1d, 0x9a, 0x53, 0xff, 0x86, 0x7f, 0x94, - 0xed, 0x09, 0xbd, 0x30, 0xd6, 0xd4, 0xbf, 0x6e, 0xfc, 0xa1, 0x1c, 0x68, - 0x33, 0x06, 0x31, 0xfe, 0xe8, 0xa8, 0xf3, 0x18, 0x8b, 0x48, 0xd7, 0x92, - 0x23, 0x4b, 0x23, 0xdc, 0x37, 0x8b, 0xf1, 0xa7, 0x5c, 0xe7, 0x9e, 0x29, - 0x5c, 0xc0, 0x19, 0xad, 0xf1, 0xfd, 0x11, 0x87, 0x6b, 0x7c, 0x99, 0x70, - 0x3a, 0xc4, 0x48, 0x96, 0xb4, 0xc7, 0x07, 0x11, 0x7b, 0x1e, 0xe0, 0x3e, - 0x32, 0x06, 0x6d, 0x17, 0xb0, 0xea, 0xb4, 0x3c, 0x3c, 0xc8, 0x75, 0xa0, - 0xdd, 0x2a, 0x7a, 0x92, 0x34, 0xf3, 0x21, 0x4f, 0x43, 0xdd, 0x81, 0xbe, - 0x06, 0xac, 0x40, 0x7f, 0x9f, 0xe9, 0x5e, 0xd5, 0x1f, 0xd7, 0x35, 0xf3, - 0xcb, 0x18, 0x96, 0x90, 0x81, 0x33, 0x1b, 0x65, 0xe7, 0xa2, 0x25, 0xf6, - 0x99, 0x55, 0xfe, 0x76, 0x9e, 0x5b, 0xcb, 0x5f, 0xf4, 0x7f, 0x15, 0x5c, - 0xd0, 0xc5, 0x8e, 0xfa, 0x1e, 0x4b, 0x05, 0xb8, 0xa3, 0xf6, 0x7b, 0xe1, - 0x5e, 0xf1, 0xfd, 0x99, 0x70, 0x4f, 0xb0, 0x07, 0x88, 0x95, 0xe7, 0x6f, - 0xc5, 0xa9, 0x0c, 0xf6, 0x06, 0xb6, 0xa7, 0xe2, 0x11, 0xe3, 0x18, 0xed, - 0xbb, 0x63, 0xd2, 0x2c, 0xb0, 0x8e, 0xe6, 0x3e, 0xc9, 0x44, 0xb9, 0x22, - 0xa5, 0xad, 0x85, 0x67, 0x7d, 0xd8, 0xcf, 0xa4, 0xa5, 0x6c, 0xaf, 0x63, - 0xaf, 0x97, 0x37, 0xa0, 0x1b, 0x8c, 0xc1, 0x26, 0xf5, 0x42, 0x42, 0x8a, - 0x8d, 0x44, 0xc2, 0x3c, 0x31, 0xf0, 0x23, 0xcf, 0x48, 0x24, 0xf4, 0x13, - 0x81, 0x9d, 0x4d, 0xd6, 0x6f, 0x20, 0x56, 0x6a, 0x72, 0x74, 0xe8, 0x86, - 0xcf, 0x1a, 0xd8, 0xdb, 0x0b, 0x9b, 0x1b, 0x82, 0xcf, 0x80, 0x8f, 0x72, - 0xa3, 0xa3, 0x37, 0xe0, 0xed, 0x2b, 0x11, 0x8f, 0xa6, 0x8e, 0xdc, 0xd3, - 0xcb, 0xfb, 0xbe, 0x51, 0xd8, 0x90, 0x98, 0xce, 0x8f, 0x6f, 0xd1, 0xcf, - 0xed, 0xdf, 0x62, 0x9c, 0x2b, 0x6d, 0x01, 0x3e, 0xdd, 0xcb, 0xe3, 0xf7, - 0x9c, 0xc8, 0x44, 0x15, 0x3a, 0xdf, 0x03, 0x3d, 0x59, 0xf0, 0xc5, 0x3d, - 0xa6, 0xca, 0xd1, 0xf5, 0x3d, 0x2f, 0x6e, 0x0a, 0x70, 0xf0, 0xfd, 0x27, - 0x7e, 0x70, 0x86, 0x5e, 0x0e, 0xfb, 0x7e, 0x3f, 0xdc, 0x87, 0x5f, 0x45, - 0xb9, 0x78, 0x5e, 0x44, 0xb2, 0xad, 0x3d, 0x37, 0xb2, 0xe3, 0x25, 0x9c, - 0x33, 0xa7, 0x1d, 0xdf, 0x7f, 0x07, 0xcf, 0x35, 0xa7, 0xd9, 0x46, 0xde, - 0x7f, 0xf6, 0x31, 0x07, 0xf8, 0x2c, 0xce, 0xbd, 0xd1, 0xa6, 0xb3, 0xff, - 0x5e, 0xcf, 0xbd, 0x7b, 0x3f, 0xfb, 0xc9, 0xf3, 0x1d, 0x7d, 0xef, 0x03, - 0xce, 0xfe, 0x0f, 0x5c, 0x77, 0x0f, 0x3e, 0x1b, 0xd8, 0x6d, 0xb1, 0xd1, - 0x1c, 0x5f, 0xee, 0xd5, 0x7f, 0x7f, 0xad, 0xfb, 0x76, 0xff, 0xb5, 0xbb, - 0x6f, 0xf7, 0xdf, 0xcd, 0xdd, 0xbf, 0x18, 0xff, 0xcd, 0x01, 0x0f, 0x7d, - 0x70, 0xad, 0xff, 0xae, 0xe7, 0x93, 0xd4, 0xf7, 0xf3, 0x3d, 0xe5, 0xa1, - 0xce, 0x30, 0x1f, 0x52, 0xe7, 0xf5, 0x17, 0xa7, 0x6d, 0xef, 0x7e, 0x53, - 0x4a, 0xb9, 0x16, 0xc9, 0xe6, 0x6a, 0xb2, 0x43, 0x8e, 0x3b, 0x22, 0x4b, - 0xaa, 0x16, 0x31, 0x51, 0x8b, 0x0f, 0xa0, 0x3e, 0x0b, 0xf4, 0xba, 0xa4, - 0xf4, 0xf2, 0x02, 0x78, 0x89, 0xf0, 0x74, 0xdd, 0x05, 0x0f, 0x71, 0x10, - 0x17, 0xf1, 0x0c, 0xe2, 0x7c, 0xb7, 0xd7, 0xc1, 0x85, 0x73, 0xea, 0x25, - 0xd4, 0x64, 0xb6, 0xde, 0xa3, 0x07, 0x67, 0xb2, 0x5b, 0x96, 0xdd, 0xe9, - 0xeb, 0xf2, 0x05, 0x9e, 0x59, 0x0a, 0xae, 0xce, 0x21, 0x56, 0x0f, 0x8d, - 0x85, 0x75, 0xd2, 0xdc, 0x41, 0xcf, 0x8e, 0xee, 0x49, 0x78, 0x47, 0x92, - 0x90, 0x92, 0x9a, 0xb5, 0x04, 0x1d, 0x68, 0x72, 0x0d, 0x67, 0xd0, 0xd5, - 0xb9, 0x76, 0xe0, 0x45, 0xee, 0x77, 0x20, 0xbb, 0x57, 0xb4, 0x7e, 0xab, - 0x55, 0x6b, 0x87, 0x2f, 0x65, 0xc4, 0x55, 0x6d, 0x9e, 0xd3, 0xa7, 0x66, - 0x16, 0x2b, 0xc8, 0x03, 0x6d, 0x9c, 0xaf, 0x79, 0xbc, 0xd7, 0x49, 0x43, - 0x93, 0x2b, 0x73, 0xba, 0xfc, 0xd3, 0x9c, 0x21, 0xff, 0x8c, 0x3a, 0xf4, - 0x9a, 0x7d, 0x6a, 0xe6, 0xb4, 0x2d, 0xf7, 0x81, 0xd5, 0xf0, 0x0e, 0x4f, - 0x76, 0x9a, 0x42, 0x5b, 0x1d, 0x48, 0xff, 0x8e, 0x20, 0xff, 0xc1, 0x9a, - 0x2b, 0x73, 0xa4, 0xb5, 0x76, 0x8d, 0xf4, 0x22, 0x1f, 0x83, 0x5d, 0x0f, - 0x30, 0x27, 0xe2, 0x7c, 0xd4, 0xab, 0x03, 0xd6, 0x3e, 0xc5, 0x5b, 0x42, - 0x16, 0xeb, 0x9c, 0x6f, 0x82, 0xb7, 0x2e, 0x9c, 0x31, 0x59, 0x6b, 0x52, - 0xfe, 0xb0, 0x5b, 0xe5, 0xaa, 0x1a, 0xfb, 0x0d, 0xb5, 0xc7, 0xef, 0xef, - 0xe7, 0xde, 0x1b, 0x32, 0x95, 0x62, 0x9b, 0x63, 0x59, 0xd4, 0x9c, 0xc4, - 0x97, 0xdd, 0xeb, 0x0a, 0x79, 0x0e, 0xde, 0xaf, 0x08, 0x65, 0xdb, 0x6d, - 0x5d, 0x97, 0xd7, 0x7d, 0xf7, 0x00, 0xe5, 0x89, 0x72, 0x8b, 0x39, 0x9f, - 0xb1, 0xd8, 0x28, 0xcc, 0xc0, 0x8e, 0xbf, 0x2a, 0xdf, 0x6f, 0x1c, 0x92, - 0xef, 0x35, 0x26, 0xe5, 0xcf, 0x1a, 0x5f, 0x96, 0x3f, 0x6d, 0x1c, 0x94, - 0xd7, 0x1b, 0x07, 0xe4, 0xb5, 0xc6, 0x84, 0xbc, 0xda, 0xd8, 0x0f, 0x1b, - 0x1f, 0x87, 0x8d, 0x9f, 0x9a, 0x99, 0xac, 0xf7, 0xcb, 0xd4, 0x49, 0xc4, - 0x20, 0xe7, 0x1b, 0xba, 0xba, 0xe3, 0xb3, 0xe9, 0xe7, 0x2d, 0x32, 0xad, - 0xee, 0xaf, 0x34, 0xe4, 0x89, 0x2d, 0xbc, 0x2b, 0x7c, 0xc5, 0x33, 0x2e, - 0x87, 0xf1, 0xe8, 0xe1, 0x94, 0xb4, 0x03, 0xbf, 0xca, 0x4b, 0x4d, 0x9e, - 0xdb, 0x62, 0x86, 0xf7, 0x9c, 0x87, 0x24, 0xc9, 0xfb, 0xb0, 0x9c, 0x67, - 0xa0, 0xde, 0x5e, 0xd7, 0x27, 0x73, 0xb4, 0x65, 0xe8, 0xc6, 0x95, 0x43, - 0xb0, 0x53, 0xc3, 0x7e, 0xcb, 0xa5, 0x1e, 0x16, 0x97, 0x28, 0xf7, 0x46, - 0x59, 0x5c, 0xa0, 0x6f, 0xff, 0x1b, 0x64, 0x6c, 0x97, 0xda, 0x82, 0x89, - 0xb9, 0x6e, 0x98, 0xab, 0x6c, 0xa7, 0x3d, 0x00, 0x1f, 0xf1, 0x7e, 0x10, - 0x4e, 0xab, 0x09, 0x27, 0xf1, 0x24, 0x54, 0x0c, 0x08, 0x70, 0x5b, 0x52, - 0x5b, 0x4a, 0xca, 0xc2, 0x42, 0x0f, 0x9e, 0x94, 0x2c, 0xd4, 0x6d, 0x3c, - 0x39, 0x3c, 0x43, 0x78, 0xd2, 0xb0, 0x53, 0xca, 0xc8, 0xd8, 0x12, 0xc9, - 0x88, 0x78, 0x5c, 0xed, 0x0d, 0x6b, 0x2a, 0xf2, 0xa3, 0x85, 0xfc, 0x74, - 0x87, 0x7d, 0x1d, 0x52, 0xab, 0x38, 0x32, 0x55, 0xfd, 0x94, 0x3e, 0xa5, - 0x74, 0x07, 0xfc, 0x95, 0x21, 0xb4, 0xef, 0x0f, 0xdb, 0x8f, 0xca, 0xf4, - 0xbc, 0xc8, 0xca, 0xcb, 0x03, 0x7a, 0x51, 0xb5, 0xf7, 0xa2, 0xad, 0xa3, - 0x9d, 0x0d, 0xdb, 0xcc, 0x8f, 0x0e, 0xe0, 0x71, 0xd5, 0xf3, 0xf5, 0xea, - 0xb8, 0x3c, 0x55, 0xed, 0x77, 0x5e, 0x87, 0xcd, 0xbd, 0x65, 0x46, 0xf7, - 0xd2, 0x04, 0x24, 0x79, 0xf6, 0x56, 0x75, 0xf7, 0xf1, 0x04, 0xe2, 0xad, - 0x9b, 0x34, 0xe5, 0x6f, 0x4f, 0x64, 0xad, 0xa7, 0xf5, 0x5c, 0x52, 0xda, - 0x7d, 0xff, 0x71, 0x3b, 0x3b, 0x3b, 0xa9, 0x77, 0xca, 0xdf, 0xbf, 0x98, - 0x91, 0x85, 0xb3, 0x5b, 0x65, 0xa1, 0x06, 0x99, 0x1a, 0xbf, 0x8e, 0x7d, - 0x35, 0xe5, 0xea, 0x9e, 0x47, 0xb1, 0x27, 0x8c, 0x5d, 0x49, 0xe4, 0x6c, - 0x1b, 0xc4, 0xec, 0x25, 0x5d, 0x49, 0x98, 0x85, 0x9c, 0x1c, 0x81, 0xdf, - 0x4f, 0xdb, 0xb9, 0x1e, 0x69, 0xc7, 0x7b, 0x7d, 0x04, 0x7c, 0x5b, 0x32, - 0xd5, 0x6b, 0xc9, 0x99, 0xc1, 0x68, 0xff, 0xb6, 0x62, 0x6e, 0x46, 0x16, - 0xcf, 0x66, 0xf0, 0x9b, 0x83, 0xfd, 0xec, 0x94, 0x57, 0x6a, 0xfd, 0xb2, - 0x54, 0xdb, 0x2a, 0x8b, 0xb5, 0xe6, 0x7d, 0xe8, 0xec, 0x09, 0xe2, 0x1d, - 0xf1, 0xf4, 0x5b, 0x53, 0xfa, 0x56, 0x71, 0xcd, 0x7e, 0xeb, 0x29, 0xfd, - 0x1f, 0xe4, 0x31, 0x33, 0xa0, 0xa9, 0x17, 0x7e, 0xa4, 0xee, 0x84, 0x26, - 0x79, 0xf6, 0x2a, 0xbc, 0x4f, 0x26, 0x49, 0xfb, 0xf5, 0xc6, 0x07, 0xd1, - 0x59, 0xcb, 0xcf, 0x9d, 0x68, 0x52, 0x06, 0xe2, 0xec, 0xbf, 0x71, 0x52, - 0xef, 0x95, 0xe5, 0x6d, 0x0f, 0x58, 0x4f, 0xea, 0xad, 0x88, 0x01, 0x3f, - 0x97, 0x9f, 0xee, 0xd9, 0x24, 0x3f, 0xfc, 0xcd, 0xec, 0xa9, 0x6f, 0x22, - 0xd9, 0xbf, 0xb2, 0xa7, 0x83, 0x71, 0x01, 0xef, 0xec, 0xcf, 0xde, 0x70, - 0x75, 0xea, 0xe1, 0x2f, 0xa0, 0x87, 0xec, 0x9c, 0xba, 0x9b, 0x56, 0x3c, - 0x90, 0x3e, 0xf5, 0x52, 0x06, 0x6f, 0x18, 0xab, 0xf7, 0x03, 0x57, 0x59, - 0xe9, 0xf9, 0x09, 0x27, 0x7b, 0x03, 0xe9, 0xb0, 0xbf, 0x68, 0xf7, 0xa7, - 0x77, 0xea, 0x3b, 0x64, 0x32, 0xfd, 0x80, 0xf5, 0xb4, 0x6c, 0x21, 0xce, - 0xd9, 0x05, 0xc1, 0xda, 0x79, 0xe2, 0xfb, 0x2b, 0xe0, 0x0b, 0x70, 0x28, - 0xff, 0x51, 0x38, 0x77, 0x59, 0x5f, 0xd7, 0x79, 0xc6, 0x63, 0x0c, 0x71, - 0xe1, 0xe2, 0x10, 0x65, 0x40, 0x82, 0x95, 0xca, 0xa6, 0x5d, 0xfd, 0xc3, - 0xc8, 0x47, 0xfc, 0xfd, 0x56, 0x51, 0x27, 0x0f, 0xe7, 0xc0, 0xcb, 0x4f, - 0xc0, 0x7f, 0x3f, 0x70, 0xa2, 0xf6, 0x48, 0x47, 0x74, 0xff, 0x4e, 0xd1, - 0x7d, 0xad, 0x21, 0xe6, 0x2a, 0x5d, 0xf4, 0xd5, 0x75, 0xc8, 0xdd, 0x07, - 0x7b, 0xb5, 0xf0, 0xcb, 0xbd, 0xe9, 0x0c, 0xf7, 0x98, 0xeb, 0x22, 0xba, - 0x11, 0xbf, 0x5c, 0x73, 0x27, 0x1e, 0xee, 0x75, 0x3e, 0xea, 0xd4, 0x03, - 0x09, 0x79, 0xf7, 0x44, 0xb4, 0x37, 0x07, 0x64, 0xba, 0x0a, 0xdd, 0xed, - 0xea, 0x0f, 0xfc, 0x27, 0x1d, 0xf1, 0x40, 0xde, 0xff, 0x06, 0xbc, 0x07, - 0xb8, 0x5b, 0x0b, 0xcd, 0xba, 0xc3, 0x58, 0x3d, 0xa0, 0x31, 0xb6, 0x0e, - 0x4f, 0x57, 0xf6, 0x44, 0xbe, 0x98, 0x84, 0x5f, 0xed, 0xb6, 0x9e, 0x10, - 0xd6, 0x63, 0xc4, 0x9b, 0x94, 0x1f, 0xbe, 0x0c, 0x1e, 0x92, 0xf4, 0x93, - 0x7f, 0x5f, 0xe3, 0x27, 0x1c, 0xdb, 0x2a, 0x35, 0xd4, 0xd4, 0x5e, 0xde, - 0x94, 0x69, 0x25, 0x03, 0xda, 0x35, 0xfa, 0x77, 0x29, 0xf4, 0xef, 0x47, - 0x80, 0xa3, 0x5d, 0x8c, 0x47, 0x1f, 0xc7, 0x59, 0x9d, 0xcd, 0x2c, 0xeb, - 0xcc, 0x03, 0x76, 0x4b, 0x51, 0xdd, 0x4f, 0xdf, 0x8b, 0xee, 0xa2, 0xd8, - 0x94, 0x96, 0x8b, 0x95, 0x28, 0x2e, 0xa5, 0x71, 0x9e, 0xb4, 0xcb, 0xa5, - 0xb9, 0x28, 0xe6, 0xb5, 0xcb, 0x12, 0xf2, 0x9a, 0x95, 0x97, 0x2c, 0x8c, - 0x25, 0xe5, 0xe2, 0x5c, 0x12, 0x31, 0xab, 0x47, 0x56, 0xe6, 0x7a, 0x30, - 0x96, 0xc2, 0xba, 0x14, 0xe6, 0xdb, 0xb2, 0x52, 0xb1, 0x81, 0x27, 0x87, - 0x76, 0x0e, 0xed, 0x21, 0xb9, 0xa4, 0xbe, 0x17, 0x30, 0x2f, 0x18, 0x42, - 0xdc, 0x62, 0x5e, 0x30, 0x82, 0x18, 0x32, 0x81, 0x27, 0x8a, 0x5d, 0xa7, - 0x66, 0xa6, 0x2a, 0xbc, 0x73, 0x84, 0x0e, 0xac, 0x53, 0x33, 0xd3, 0xb6, - 0x89, 0xba, 0xed, 0x1b, 0xda, 0x54, 0x83, 0x72, 0x41, 0xb7, 0x43, 0x1d, - 0xa2, 0x3f, 0x4a, 0x9b, 0xe4, 0x79, 0x67, 0x20, 0xc6, 0x77, 0x01, 0x9f, - 0x23, 0xfa, 0x6f, 0xd0, 0x17, 0xa0, 0xc3, 0x27, 0xba, 0xe4, 0xd2, 0xcb, - 0x8c, 0x35, 0xae, 0xbc, 0x7a, 0x96, 0x3a, 0x2c, 0xf6, 0xac, 0xea, 0x90, - 0x63, 0x0f, 0xe1, 0x8c, 0xd8, 0x0f, 0x7b, 0x32, 0x33, 0x87, 0x90, 0xcb, - 0x7c, 0x1b, 0xf6, 0x59, 0x66, 0xcd, 0x9d, 0x0e, 0x6a, 0x84, 0x20, 0x06, - 0xa0, 0xdd, 0x47, 0x5d, 0xb1, 0xdd, 0x07, 0xbb, 0xe3, 0x58, 0x9f, 0x1a, - 0x5b, 0x04, 0x8e, 0x60, 0x8c, 0xed, 0xcd, 0xb2, 0xa8, 0xc6, 0x0e, 0xaa, - 0xb1, 0xb2, 0xb2, 0x0f, 0x8e, 0x1d, 0x52, 0xb1, 0xe9, 0x7c, 0x23, 0xea, - 0xdf, 0x88, 0x58, 0xc2, 0x7e, 0xf6, 0xe5, 0x61, 0xeb, 0x7b, 0x71, 0xae, - 0x15, 0x64, 0xa9, 0x81, 0x3a, 0x30, 0xff, 0x7b, 0x98, 0xcb, 0x3d, 0xc8, - 0x9e, 0x2a, 0xe9, 0xe4, 0xf1, 0x20, 0xce, 0x83, 0xfd, 0x21, 0xad, 0xb6, - 0x90, 0xaf, 0x03, 0x61, 0xbb, 0x25, 0xa4, 0x4d, 0x3c, 0x36, 0x70, 0x1c, - 0xc3, 0x5a, 0x17, 0x38, 0x18, 0x63, 0x11, 0x23, 0x52, 0x29, 0xe8, 0x82, - 0x34, 0xdb, 0xa4, 0xac, 0xde, 0xf7, 0xc3, 0x76, 0xb9, 0x16, 0x3a, 0xb4, - 0xa2, 0x75, 0xa5, 0x70, 0xcf, 0x53, 0xea, 0x9c, 0xd1, 0x93, 0x9b, 0xc3, - 0x9c, 0x10, 0x7a, 0x45, 0x9c, 0xd5, 0x93, 0x8c, 0x37, 0xef, 0x84, 0x76, - 0xda, 0x8b, 0xbe, 0x87, 0x44, 0xef, 0x65, 0xdf, 0x51, 0xe0, 0x61, 0xed, - 0x3c, 0x0c, 0x99, 0xd9, 0xe6, 0xfa, 0x6c, 0xd3, 0xfa, 0xc4, 0x3a, 0xeb, - 0x3b, 0x9a, 0xfa, 0x32, 0x52, 0x9b, 0xef, 0x52, 0xf1, 0xf2, 0x7c, 0x18, - 0x2f, 0x17, 0x6b, 0x94, 0x05, 0x7e, 0x96, 0x7f, 0x5b, 0xe9, 0xa2, 0x76, - 0x36, 0xb0, 0xf5, 0xa5, 0x93, 0x3c, 0x17, 0x57, 0xe7, 0xd5, 0xd4, 0xbc, - 0xdf, 0x06, 0xff, 0xba, 0x1c, 0x55, 0x32, 0x70, 0x3e, 0xe6, 0xd5, 0x02, - 0xbf, 0x31, 0x6c, 0xce, 0xa1, 0x8f, 0x44, 0x6b, 0x38, 0xff, 0xe7, 0xa8, - 0x55, 0xbe, 0xac, 0xd6, 0xac, 0xfa, 0x0c, 0xf9, 0x71, 0x42, 0x9e, 0x7b, - 0xc0, 0x5f, 0x67, 0x28, 0x43, 0x7b, 0x28, 0x03, 0xf1, 0xfd, 0x27, 0x70, - 0xb7, 0x61, 0x1e, 0x79, 0xdd, 0x86, 0x3e, 0xbe, 0xff, 0x17, 0xfa, 0x76, - 0x23, 0xff, 0x23, 0x6f, 0x89, 0x26, 0xde, 0xfe, 0x03, 0x63, 0x3d, 0x4a, - 0xb7, 0x35, 0xd4, 0x26, 0x53, 0xbc, 0xef, 0x48, 0xe1, 0x1c, 0x38, 0xb9, - 0x4d, 0xd1, 0xad, 0x9d, 0xbd, 0x86, 0xf1, 0x5e, 0xac, 0x89, 0xda, 0xcd, - 0xb2, 0xe9, 0x58, 0xfb, 0x53, 0x25, 0xcf, 0x62, 0xed, 0x4e, 0xf2, 0x6f, - 0x5b, 0x23, 0x3b, 0xe5, 0x26, 0x4f, 0xe4, 0xa7, 0x1f, 0x4f, 0x2b, 0x72, - 0x21, 0xd8, 0x6d, 0xd2, 0x90, 0xd1, 0x7c, 0x9a, 0xdf, 0xf9, 0x12, 0xbc, - 0x17, 0x1d, 0x19, 0xe4, 0x9e, 0xa1, 0xdd, 0x60, 0x4e, 0x47, 0x7f, 0x4b, - 0xc8, 0x31, 0xd4, 0x24, 0xe5, 0x85, 0x8c, 0x56, 0x3c, 0x99, 0x45, 0x16, - 0xad, 0xbe, 0xd5, 0xc9, 0x8b, 0x4b, 0xb6, 0x7c, 0x1b, 0x7e, 0x7a, 0xb2, - 0x9e, 0x4d, 0x7f, 0x13, 0xf9, 0xc1, 0x91, 0x25, 0xe6, 0x13, 0x3d, 0x29, - 0x65, 0x9b, 0xf3, 0x9a, 0x6c, 0x60, 0x4c, 0x9b, 0x47, 0x7e, 0x6a, 0xdd, - 0x2d, 0x47, 0x82, 0x9f, 0x57, 0xd7, 0xc6, 0x0c, 0xca, 0xb1, 0x36, 0x66, - 0x10, 0x0f, 0x63, 0xc6, 0x4e, 0xec, 0x13, 0x63, 0x06, 0xf6, 0xff, 0x24, - 0x63, 0x86, 0x8d, 0x75, 0x8c, 0x19, 0x79, 0x59, 0xac, 0x32, 0x66, 0xec, - 0x45, 0x9b, 0x31, 0xa3, 0x80, 0x76, 0x10, 0x2f, 0x16, 0x55, 0xbc, 0xc8, - 0x5a, 0xcb, 0xc2, 0x38, 0x81, 0x3c, 0xb1, 0x8a, 0x3c, 0xb1, 0x8a, 0x3c, - 0xb1, 0x8a, 0x3c, 0xb1, 0x8a, 0x3c, 0x11, 0xb6, 0xfe, 0x5a, 0x15, 0x79, - 0x22, 0xfc, 0xe7, 0x3c, 0x72, 0x92, 0xa0, 0xa6, 0x38, 0x8c, 0x9a, 0xc2, - 0xd5, 0xc6, 0xaa, 0xe3, 0xda, 0xbe, 0x2a, 0x6a, 0x43, 0xf5, 0x9d, 0x58, - 0x1f, 0xda, 0x80, 0xba, 0xa8, 0xe6, 0x6c, 0x01, 0x5f, 0xd7, 0xe0, 0x1b, - 0xd4, 0xd3, 0x56, 0x99, 0xca, 0xed, 0x80, 0x7c, 0xd8, 0x7f, 0xfb, 0xfb, - 0xe8, 0x43, 0x3e, 0x9f, 0x63, 0x0d, 0xc2, 0x78, 0xb5, 0x0f, 0x6d, 0x1d, - 0x6d, 0xec, 0xe9, 0x04, 0x7c, 0xc4, 0x7e, 0x90, 0xf9, 0x62, 0x7a, 0x41, - 0x9e, 0xdc, 0x1c, 0xd8, 0xf4, 0x6f, 0x31, 0x27, 0x5e, 0xd3, 0xde, 0x88, - 0x39, 0xf0, 0x17, 0xd8, 0x97, 0x5a, 0x03, 0x5c, 0xba, 0xfd, 0xe7, 0xc4, - 0xd1, 0xb7, 0xe1, 0xd6, 0x1c, 0xda, 0xd5, 0xf7, 0x9a, 0xfa, 0xb2, 0x98, - 0xcf, 0xef, 0xe2, 0x3b, 0xf0, 0xfb, 0x16, 0x7e, 0x61, 0x77, 0xf6, 0x05, - 0xcc, 0xe9, 0xc3, 0xef, 0x77, 0x9a, 0xe6, 0x42, 0x0a, 0xfb, 0x2f, 0xd1, - 0x77, 0x31, 0xa4, 0xc1, 0x6f, 0x89, 0x5f, 0x6a, 0xe2, 0xe3, 0x07, 0xe8, - 0xfb, 0x6b, 0xf4, 0xf9, 0xfe, 0xdb, 0x4e, 0xd4, 0x27, 0xa5, 0x96, 0x70, - 0xef, 0x46, 0xd5, 0xde, 0x69, 0xca, 0xe6, 0x8f, 0x2c, 0xe9, 0xaa, 0x0e, - 0x7a, 0xae, 0x8e, 0xea, 0x08, 0x71, 0xbe, 0xbc, 0x10, 0xd4, 0xad, 0xc7, - 0x51, 0x73, 0x16, 0xab, 0xb4, 0x91, 0x1c, 0xfa, 0x6d, 0x9c, 0x69, 0x32, - 0x69, 0xdc, 0xaa, 0x63, 0x13, 0x89, 0xc9, 0x7a, 0x9b, 0x48, 0x37, 0x69, - 0x32, 0x4f, 0x22, 0x8e, 0xd9, 0x99, 0xe2, 0xc2, 0xec, 0x8c, 0x07, 0x9c, - 0x63, 0x75, 0xae, 0xe5, 0x3c, 0x93, 0xf7, 0x63, 0x4d, 0x74, 0x69, 0x13, - 0x60, 0x06, 0xf4, 0x9e, 0xab, 0x93, 0x7e, 0x40, 0xb3, 0xac, 0x68, 0xda, - 0xe8, 0x8f, 0xea, 0xc7, 0x1c, 0x6a, 0x5d, 0x99, 0x64, 0xed, 0x5c, 0x0c, - 0x69, 0xba, 0x75, 0x49, 0x24, 0x0a, 0xcd, 0xf8, 0x82, 0x8c, 0xf3, 0xb9, - 0xfa, 0xec, 0x8c, 0xfe, 0x42, 0x36, 0xc7, 0x3b, 0x11, 0xd7, 0x9a, 0x9d, - 0x69, 0x1d, 0x48, 0xc8, 0x8f, 0x91, 0xbb, 0x1d, 0x53, 0x34, 0x66, 0x67, - 0x8c, 0x17, 0x02, 0x5b, 0x0c, 0xe8, 0xe0, 0x3c, 0xc9, 0xb7, 0x43, 0x4e, - 0xd2, 0x62, 0x4d, 0x1d, 0x8c, 0x4f, 0xaa, 0x7a, 0xd1, 0x94, 0x2b, 0x15, - 0x45, 0x3b, 0xac, 0xdb, 0xc9, 0xc3, 0xec, 0x8c, 0xfc, 0xd1, 0x2d, 0x1e, - 0xd6, 0x91, 0x87, 0x78, 0x49, 0x27, 0xd0, 0x5b, 0xc0, 0x7f, 0x12, 0xf5, - 0x7b, 0x54, 0xab, 0xfb, 0xfe, 0x8a, 0x93, 0x43, 0x5c, 0xe0, 0x3e, 0xb6, - 0xa8, 0x3c, 0xd7, 0x73, 0x32, 0xbc, 0xef, 0x9b, 0xe3, 0xdf, 0x39, 0x78, - 0xf9, 0x01, 0xd4, 0x4d, 0xbc, 0x1b, 0xa4, 0x7f, 0xe1, 0xf7, 0x36, 0xff, - 0xe2, 0x7c, 0xf6, 0x93, 0xe7, 0x81, 0xf4, 0x55, 0xf0, 0xe7, 0xe5, 0xd1, - 0x87, 0x58, 0x51, 0x6c, 0x44, 0xb8, 0x78, 0xc7, 0xce, 0x39, 0x2a, 0xff, - 0x6e, 0xf2, 0xd1, 0x96, 0xf0, 0xdc, 0xa5, 0x8e, 0xc8, 0x27, 0xf9, 0xe9, - 0x84, 0x4d, 0x90, 0x17, 0xce, 0x8f, 0xee, 0x25, 0xd8, 0xfe, 0xb8, 0x36, - 0x12, 0xdd, 0xa9, 0x7d, 0x9c, 0x3d, 0x8f, 0x74, 0x76, 0x37, 0x7e, 0x88, - 0x83, 0xb4, 0x23, 0xbe, 0x22, 0x9e, 0x88, 0x8f, 0xfc, 0x44, 0xbc, 0x28, - 0x1b, 0x5d, 0x97, 0x9f, 0x60, 0x5d, 0xc0, 0x4f, 0x69, 0x21, 0x0d, 0x9d, - 0x90, 0xa7, 0x11, 0x6d, 0xa4, 0xba, 0xde, 0x1d, 0xc7, 0x0f, 0x5c, 0xc6, - 0xd5, 0xb1, 0x06, 0xef, 0xa1, 0x48, 0x97, 0x7f, 0x3b, 0xb2, 0xa4, 0x8d, - 0x34, 0xf8, 0x9d, 0xa9, 0xae, 0xb9, 0x8d, 0x88, 0xde, 0x5a, 0x9d, 0x46, - 0xbf, 0xbc, 0x2b, 0xff, 0x0c, 0xf6, 0xa9, 0x3b, 0xf8, 0xbb, 0x14, 0x55, - 0x47, 0xb1, 0x6f, 0xb9, 0xd5, 0x73, 0xa2, 0xbf, 0xd3, 0xd9, 0x1f, 0xe6, - 0x43, 0x51, 0x6d, 0x1c, 0xd5, 0x59, 0xea, 0x9e, 0x7d, 0xaf, 0xe7, 0x68, - 0xc8, 0x4f, 0x99, 0x33, 0x05, 0x3a, 0x08, 0xf1, 0xde, 0x91, 0xcf, 0x91, - 0x26, 0x3e, 0x47, 0xc1, 0xe7, 0x3e, 0xf0, 0x39, 0x76, 0x8b, 0xcf, 0x5b, - 0xb6, 0x97, 0x29, 0xc3, 0xf6, 0x46, 0xd6, 0xb5, 0xbd, 0x55, 0x3a, 0xab, - 0x73, 0x83, 0xfb, 0x9a, 0x91, 0x86, 0x2f, 0xc7, 0x9d, 0x8f, 0x53, 0x37, - 0xb7, 0xcb, 0x99, 0x85, 0xbb, 0xd5, 0xb7, 0x11, 0xaf, 0x2a, 0x77, 0x94, - 0x4b, 0xf5, 0x80, 0x9f, 0x1f, 0x2f, 0xb1, 0x3d, 0x12, 0xea, 0x8a, 0x3a, - 0xcb, 0x3a, 0x25, 0xb9, 0x1b, 0x2f, 0xbf, 0xf8, 0x9c, 0x76, 0xa5, 0x12, - 0x9d, 0x4f, 0x5a, 0x78, 0xc6, 0xae, 0xe5, 0x29, 0xfa, 0x6e, 0x32, 0x66, - 0x45, 0xf7, 0x67, 0x22, 0xfc, 0xfe, 0xc0, 0xef, 0x75, 0x6b, 0xbf, 0x13, - 0xf0, 0x7c, 0x8a, 0x78, 0xd7, 0x53, 0x3c, 0x9f, 0xc6, 0x9c, 0x66, 0x19, - 0x5c, 0xd8, 0xa4, 0x9e, 0xe4, 0x98, 0xe7, 0xd0, 0x2f, 0x4c, 0xd0, 0x0c, - 0xee, 0xdd, 0x6a, 0x4b, 0xbe, 0x5c, 0x74, 0x36, 0x06, 0xe7, 0x28, 0x64, - 0xba, 0x6c, 0xf1, 0xfe, 0x0a, 0x31, 0x8c, 0x67, 0x83, 0xb2, 0xb5, 0x16, - 0xf5, 0x5c, 0x39, 0xd0, 0x0e, 0x1d, 0xb3, 0xdd, 0xd6, 0xcb, 0xfb, 0x0a, - 0xca, 0xbc, 0xa0, 0xf6, 0x21, 0xd2, 0x71, 0xf4, 0x7d, 0xae, 0x55, 0x96, - 0xc3, 0xbb, 0xad, 0xc5, 0x8a, 0xef, 0xbf, 0x83, 0x3c, 0xfc, 0x34, 0x74, - 0x5f, 0xae, 0xff, 0xcc, 0x5f, 0x4e, 0xf1, 0x6f, 0xa5, 0x22, 0x9b, 0xd8, - 0xd1, 0xcb, 0x7b, 0x20, 0xf8, 0x96, 0x1c, 0xaf, 0x87, 0x65, 0xbf, 0x70, - 0x9c, 0x7d, 0xff, 0x0d, 0xbe, 0x7d, 0xff, 0xf4, 0xaa, 0x9d, 0x02, 0xfe, - 0x17, 0x33, 0xe1, 0x9b, 0xdd, 0x90, 0x58, 0x00, 0x00, 0x00 }; + 0x1f, 0x8b, 0x08, 0x08, 0xcb, 0xa3, 0x46, 0x45, 0x00, 0x03, 0x74, 0x65, + 0x73, 0x74, 0x31, 0x2e, 0x62, 0x69, 0x6e, 0x00, 0xec, 0x5c, 0x6f, 0x6c, + 0x1c, 0xc7, 0x75, 0x7f, 0x3b, 0xbb, 0xa4, 0x4e, 0xd4, 0x91, 0x5c, 0x1e, + 0x4f, 0xf4, 0x49, 0x66, 0x94, 0x5d, 0x71, 0x25, 0x5e, 0x2d, 0xc6, 0x5d, + 0x31, 0x57, 0x9b, 0x08, 0xce, 0xf1, 0x79, 0xef, 0x64, 0xb1, 0x86, 0x0a, + 0x51, 0x0d, 0x1d, 0x1b, 0x85, 0x6b, 0xb0, 0x47, 0x39, 0xae, 0xdb, 0x7e, + 0x90, 0x65, 0x1b, 0x30, 0xda, 0x10, 0xbe, 0x1c, 0xe9, 0x46, 0x75, 0x2f, + 0xdc, 0x8b, 0xc4, 0x98, 0x06, 0xfa, 0x07, 0x57, 0x92, 0xfa, 0x83, 0xe0, + 0xa0, 0x93, 0xe2, 0x26, 0xf5, 0x17, 0x57, 0x84, 0x2a, 0xc7, 0xf9, 0xe0, + 0x02, 0x4e, 0x63, 0x20, 0x06, 0xea, 0x16, 0xaa, 0xec, 0xd8, 0x46, 0x81, + 0xa2, 0x42, 0x1c, 0xd8, 0x46, 0xfc, 0x67, 0xfb, 0x7b, 0x33, 0xbb, 0xd4, + 0x91, 0x96, 0x6d, 0xa0, 0x1f, 0xfa, 0xa5, 0x3b, 0xc0, 0x61, 0x67, 0x66, + 0xe7, 0xbd, 0x79, 0xf3, 0xfe, 0xbf, 0x59, 0x4a, 0x7f, 0x90, 0xa4, 0x2e, + 0x0a, 0x5b, 0x37, 0x7e, 0xd6, 0x91, 0xc7, 0x8f, 0xde, 0x3c, 0x76, 0xf3, + 0x28, 0xd1, 0x97, 0x47, 0xf5, 0x1b, 0x12, 0x22, 0x9a, 0x8f, 0x5b, 0xdc, + 0xe2, 0x16, 0xb7, 0xb8, 0xc5, 0x2d, 0x6e, 0x71, 0x8b, 0x5b, 0xdc, 0xe2, + 0x16, 0xb7, 0xb8, 0xc5, 0x2d, 0x6e, 0x71, 0x8b, 0x5b, 0xdc, 0xe2, 0x16, + 0xb7, 0xb8, 0xc5, 0x2d, 0x6e, 0x71, 0x8b, 0x5b, 0xdc, 0xe2, 0x16, 0xb7, + 0xb8, 0xc5, 0x2d, 0x6e, 0x71, 0x8b, 0x5b, 0xdc, 0xe2, 0x16, 0xb7, 0xb8, + 0xc5, 0x2d, 0x6e, 0x71, 0x8b, 0x5b, 0xdc, 0xe2, 0x16, 0xb7, 0xb8, 0xc5, + 0x2d, 0x6e, 0x71, 0xfb, 0xff, 0xde, 0x74, 0x22, 0x93, 0x9f, 0xdd, 0xe1, + 0x8f, 0x12, 0x22, 0xbf, 0xfa, 0x90, 0xe7, 0x50, 0x42, 0xcf, 0xbf, 0x34, + 0x33, 0xed, 0x10, 0x15, 0x9a, 0x7b, 0xac, 0x22, 0x7d, 0x14, 0x54, 0xd2, + 0x06, 0xf1, 0xfc, 0x17, 0xf2, 0x1f, 0x3e, 0xf1, 0xfc, 0xad, 0xf6, 0xd5, + 0x86, 0x4e, 0x09, 0x33, 0x3f, 0xb7, 0xd7, 0xdc, 0x4d, 0x89, 0x41, 0xc0, + 0xfc, 0xf5, 0xf0, 0x7f, 0xf4, 0x50, 0x0f, 0x5d, 0xc3, 0xe3, 0x24, 0xe8, + 0xb2, 0xfe, 0x9c, 0xe6, 0xb5, 0x82, 0xe0, 0xa4, 0x1b, 0x04, 0x3f, 0xc6, + 0xef, 0x2d, 0x17, 0x63, 0xff, 0xe3, 0xa0, 0x60, 0xe8, 0x24, 0x9c, 0xbf, + 0xd4, 0xbc, 0xe5, 0x2e, 0xaa, 0x2e, 0x1a, 0x34, 0xeb, 0xa7, 0xe9, 0x98, + 0x5f, 0xd1, 0x4a, 0xad, 0x9a, 0xb6, 0xef, 0xf4, 0xbc, 0x76, 0xe7, 0xe9, + 0x63, 0xda, 0xfe, 0xd3, 0x75, 0xcd, 0x3b, 0x4d, 0x15, 0xb1, 0x37, 0x49, + 0x05, 0xf3, 0x8c, 0x56, 0x6c, 0x0d, 0x68, 0xde, 0x89, 0x0f, 0xc9, 0x73, + 0x6d, 0xf3, 0xf7, 0xc8, 0x28, 0x80, 0x16, 0xf2, 0x6a, 0x41, 0xe0, 0xb9, + 0x06, 0x15, 0xd2, 0x41, 0x20, 0xf2, 0xc1, 0x13, 0x5e, 0xce, 0x31, 0x85, + 0x96, 0xa6, 0x6a, 0x6b, 0x00, 0x78, 0x93, 0x5a, 0x71, 0xd1, 0xd0, 0x4a, + 0x7e, 0x70, 0xc1, 0x73, 0x69, 0x50, 0xa7, 0x20, 0x98, 0x73, 0x77, 0x65, + 0x0e, 0xd3, 0x29, 0xe0, 0x6d, 0x02, 0x1f, 0x99, 0x22, 0xcf, 0xf4, 0x31, + 0x9d, 0x4c, 0x72, 0x45, 0x2b, 0x0e, 0x47, 0xf4, 0x91, 0xc5, 0xf4, 0x97, + 0x57, 0x04, 0xe8, 0xdc, 0x42, 0xe5, 0x86, 0x49, 0x53, 0x2b, 0x1b, 0xd7, + 0x5f, 0x0e, 0x9e, 0x1f, 0x36, 0xe9, 0x5c, 0xcb, 0xae, 0x54, 0x28, 0x41, + 0x73, 0xbe, 0x45, 0x22, 0x4f, 0x05, 0x2f, 0x37, 0x48, 0x17, 0x5a, 0x19, + 0xfa, 0x41, 0xcb, 0xc9, 0x54, 0x69, 0x13, 0x95, 0xd3, 0x69, 0x3a, 0xdf, + 0x4a, 0xe3, 0x8c, 0xc1, 0x05, 0xe1, 0x38, 0x66, 0x15, 0x6b, 0xab, 0xad, + 0x97, 0xf8, 0xdf, 0xbf, 0x98, 0xd3, 0x39, 0x09, 0x53, 0x01, 0xdd, 0xe1, + 0x5a, 0x3e, 0x87, 0x5c, 0x2b, 0xcf, 0xa2, 0xd6, 0x52, 0x65, 0x3a, 0x87, + 0xb9, 0xd6, 0x1d, 0x6b, 0xfc, 0x2d, 0xa4, 0xf9, 0x69, 0x52, 0xd5, 0xef, + 0x00, 0x6f, 0xb8, 0x3f, 0x88, 0xb3, 0xee, 0xd0, 0xbc, 0xc5, 0x7f, 0x65, + 0xbc, 0x69, 0x41, 0x3b, 0x30, 0x1e, 0xc4, 0x98, 0xfb, 0xbb, 0x32, 0x65, + 0x02, 0x8f, 0x5b, 0x49, 0x8c, 0x99, 0xce, 0x20, 0xd8, 0xef, 0x92, 0x59, + 0x75, 0x7b, 0x01, 0x6b, 0x51, 0xd5, 0xed, 0x01, 0xbe, 0x0e, 0xea, 0x73, + 0xf8, 0x7c, 0xbc, 0xe7, 0x66, 0xcc, 0x07, 0xdd, 0x7a, 0x3e, 0x08, 0xa6, + 0x73, 0xd4, 0xa3, 0xe6, 0xf6, 0x48, 0x1c, 0x53, 0x13, 0x1a, 0xd6, 0xbd, + 0xc3, 0x7b, 0x24, 0x52, 0x79, 0xee, 0xf3, 0x33, 0x47, 0xde, 0xfc, 0x8e, + 0x90, 0xa6, 0x0c, 0x68, 0xba, 0x31, 0xec, 0x43, 0x0e, 0x3e, 0xf8, 0xe1, + 0xde, 0x80, 0xb1, 0xf6, 0x45, 0xe0, 0xc9, 0x56, 0x89, 0xf7, 0xe8, 0xa7, + 0xa5, 0x34, 0x89, 0x2b, 0x6e, 0x5f, 0xb8, 0xae, 0x07, 0xb4, 0x46, 0xfa, + 0x30, 0x40, 0x73, 0x8b, 0xcc, 0xf3, 0x1a, 0x64, 0x24, 0x68, 0xe7, 0x2d, + 0x15, 0xad, 0xd0, 0x3a, 0x86, 0xbe, 0x41, 0xd3, 0x4e, 0x70, 0x61, 0xce, + 0x9d, 0xd7, 0x8a, 0xa7, 0x4f, 0x69, 0xa5, 0xd3, 0xcf, 0x69, 0xfb, 0x5a, + 0x2f, 0x76, 0x53, 0x97, 0x8d, 0xd3, 0x27, 0xe8, 0x49, 0x5f, 0x23, 0xa6, + 0x73, 0x09, 0x3c, 0x2c, 0x98, 0x15, 0x32, 0x9c, 0x1e, 0xed, 0x4e, 0xe0, + 0xe9, 0x70, 0xfe, 0x2c, 0x49, 0x3d, 0x3a, 0x6d, 0x72, 0xa2, 0xb5, 0x69, + 0xfa, 0x73, 0xd0, 0x74, 0xd1, 0xdd, 0xca, 0x7c, 0xeb, 0x55, 0x30, 0xa9, + 0x90, 0x0e, 0xd6, 0x2f, 0x96, 0x9f, 0x6d, 0x7a, 0xba, 0xa0, 0xd2, 0xc2, + 0x5f, 0xf4, 0x57, 0x47, 0xb6, 0xf0, 0x3a, 0xd8, 0xc2, 0xd5, 0x87, 0xa6, + 0x1d, 0xaf, 0xcf, 0xa0, 0x8a, 0x29, 0xc8, 0x36, 0x8b, 0xf4, 0x45, 0x9a, + 0x73, 0x89, 0x8a, 0x35, 0xec, 0xeb, 0x18, 0xe0, 0x8f, 0x03, 0xfe, 0xec, + 0xaa, 0xe8, 0xe2, 0x1e, 0xa0, 0xa9, 0x68, 0x46, 0xc8, 0xcb, 0x25, 0xba, + 0x4b, 0xc2, 0x8b, 0xbc, 0x0b, 0x5d, 0xed, 0xe2, 0x3e, 0xf6, 0x4e, 0xc8, + 0xbd, 0xf5, 0xbc, 0x93, 0x59, 0x26, 0xd2, 0x44, 0x7e, 0x0f, 0xf0, 0xb1, + 0x0e, 0xf3, 0xba, 0x79, 0xd0, 0xc9, 0xf4, 0x73, 0xdf, 0x01, 0x4c, 0x02, + 0xfa, 0xde, 0xdd, 0x46, 0x2b, 0xe8, 0x49, 0x33, 0xbf, 0x99, 0x7f, 0xf2, + 0xac, 0xda, 0xb5, 0xb3, 0x7e, 0x10, 0x0c, 0x8f, 0x1a, 0xf4, 0x63, 0x79, + 0x66, 0xb6, 0x37, 0x5e, 0x97, 0x0e, 0xf5, 0x23, 0x01, 0x9d, 0x22, 0xad, + 0xec, 0x9a, 0x6b, 0xb8, 0xca, 0x44, 0x42, 0xcf, 0x27, 0xa9, 0x28, 0xe9, + 0x1b, 0xc3, 0x5e, 0x6c, 0x87, 0xb0, 0x27, 0x87, 0xcf, 0xc2, 0x73, 0x79, + 0xd8, 0xbb, 0xcd, 0x7d, 0x2a, 0xd7, 0xd9, 0xf6, 0x99, 0xb6, 0x55, 0x5b, + 0xfe, 0xd3, 0x2c, 0x89, 0x4f, 0x0c, 0xe8, 0xd4, 0x4b, 0x13, 0xee, 0x87, + 0x81, 0xd8, 0x8d, 0xf7, 0x23, 0x19, 0xd0, 0x66, 0x5b, 0xb0, 0xca, 0x94, + 0x4e, 0x1a, 0xe8, 0xde, 0x93, 0x31, 0xc9, 0xc1, 0xd9, 0xc0, 0xdf, 0x89, + 0x55, 0x30, 0xff, 0xd3, 0xe8, 0x54, 0x78, 0x41, 0x66, 0xc1, 0x03, 0x8d, + 0x9e, 0xfb, 0x65, 0xc9, 0x33, 0x13, 0xe7, 0xd7, 0xe7, 0x99, 0xbf, 0x5d, + 0xb0, 0x0b, 0x8d, 0xca, 0x2e, 0xe3, 0x8e, 0x70, 0x08, 0x1a, 0xbe, 0xa5, + 0x1d, 0x47, 0x24, 0x5f, 0xd6, 0x5d, 0x83, 0x46, 0x47, 0x79, 0x2d, 0xaf, + 0xe3, 0xf5, 0xf6, 0x98, 0x25, 0x3e, 0x08, 0xf6, 0xae, 0xdb, 0xd3, 0x21, + 0x31, 0x0f, 0x9a, 0x95, 0x2c, 0xc0, 0xc3, 0xcf, 0x5b, 0xcb, 0x72, 0xd8, + 0xc8, 0x6f, 0x5e, 0xdb, 0xbe, 0x0e, 0xfa, 0x3c, 0xc0, 0x34, 0x9c, 0x4c, + 0x2a, 0x3b, 0x8d, 0x68, 0x8a, 0x64, 0xa9, 0x85, 0x38, 0x3e, 0xeb, 0x1c, + 0xbc, 0x1e, 0xfe, 0xc3, 0x87, 0xff, 0x80, 0x4f, 0x3c, 0xef, 0xc3, 0xbf, + 0xf8, 0xec, 0x6f, 0x2c, 0x7a, 0x7e, 0x18, 0xfe, 0xf1, 0x9a, 0x7f, 0x42, + 0x1b, 0x47, 0x5f, 0x90, 0x0e, 0xff, 0x34, 0xdb, 0x10, 0xb0, 0x73, 0xf8, + 0x8a, 0x15, 0x9e, 0x83, 0x5f, 0x58, 0x29, 0xe1, 0xe9, 0x50, 0xb5, 0xc9, + 0x7a, 0x18, 0xf9, 0x61, 0xf6, 0x57, 0x19, 0xf8, 0x26, 0xf6, 0x47, 0xec, + 0xb7, 0x78, 0x6d, 0x10, 0x94, 0x5c, 0x86, 0x0d, 0x20, 0x47, 0xb6, 0xbb, + 0x24, 0x89, 0x54, 0x45, 0x3b, 0x34, 0x0c, 0x7b, 0xbc, 0x89, 0x7d, 0x0b, + 0xdb, 0xe5, 0x8d, 0x44, 0x9d, 0xbc, 0xdf, 0xaf, 0xbb, 0xd5, 0xbf, 0xd9, + 0xdb, 0x84, 0x35, 0xf2, 0xd9, 0xa3, 0xc6, 0x66, 0xe8, 0x97, 0xf8, 0xbd, + 0x6d, 0x15, 0x68, 0x57, 0x38, 0xe6, 0xfe, 0x1a, 0xbd, 0xae, 0xb8, 0x25, + 0x41, 0x3b, 0x4f, 0x29, 0x7f, 0xba, 0x73, 0x09, 0x9a, 0x71, 0x4a, 0xd1, + 0xb8, 0xf3, 0x6c, 0xe4, 0x57, 0x93, 0xc0, 0x07, 0xfa, 0xfc, 0xb5, 0x18, + 0x82, 0xf6, 0x9e, 0x06, 0xd3, 0xc2, 0xdc, 0x46, 0x5e, 0xb0, 0x2f, 0x67, + 0xfb, 0x34, 0xdb, 0xed, 0x73, 0x2f, 0xec, 0xd3, 0xed, 0x24, 0xdb, 0xfd, + 0x27, 0xd8, 0xe7, 0xb7, 0x5d, 0x0d, 0xbc, 0x21, 0xba, 0x54, 0xcb, 0xc0, + 0x3f, 0x18, 0x99, 0xd7, 0x69, 0x97, 0x35, 0x0b, 0xbd, 0x3c, 0xc9, 0x73, + 0x4d, 0xcc, 0x49, 0x3f, 0xae, 0xfc, 0xc7, 0x65, 0xfd, 0xbb, 0xa0, 0x2b, + 0x08, 0x66, 0x81, 0xb3, 0x3c, 0xa2, 0x87, 0xb6, 0x18, 0xcd, 0x5f, 0x45, + 0x3c, 0xf4, 0x7e, 0x43, 0xa7, 0x4a, 0xb6, 0x83, 0xec, 0xec, 0x12, 0x70, + 0x4f, 0xbb, 0xca, 0xee, 0xd9, 0x36, 0x96, 0x81, 0x7f, 0xce, 0x1f, 0x86, + 0x5f, 0x60, 0xbb, 0x01, 0x5d, 0xc0, 0xbf, 0x0c, 0xfc, 0x73, 0xad, 0x0e, + 0xfa, 0x96, 0x11, 0xc5, 0xd9, 0xe8, 0x3c, 0xdb, 0xb0, 0x2c, 0xda, 0xf7, + 0x08, 0xdd, 0xe5, 0xa7, 0xe0, 0x73, 0xd8, 0x27, 0x57, 0xb3, 0xb0, 0x2b, + 0xad, 0xea, 0xf2, 0xde, 0x3a, 0x2d, 0xaf, 0xad, 0xa1, 0x42, 0x55, 0xd9, + 0x6c, 0xc1, 0x1b, 0xae, 0x64, 0x74, 0xe9, 0x7b, 0x88, 0xee, 0x84, 0xad, + 0x2e, 0x3b, 0x3c, 0xe6, 0x79, 0x35, 0x37, 0x5e, 0x1b, 0xd0, 0x8a, 0xec, + 0xbf, 0x86, 0x3f, 0x04, 0x7d, 0x6a, 0xee, 0xb7, 0x6b, 0x0f, 0xb1, 0x8c, + 0x70, 0x16, 0xb2, 0xaa, 0xee, 0x7f, 0x06, 0xd0, 0xdf, 0x75, 0x30, 0xd7, + 0xc7, 0x63, 0x8f, 0x2b, 0x9d, 0x25, 0x6d, 0xbf, 0x23, 0x06, 0x3a, 0x43, + 0x9f, 0xb7, 0x1f, 0x93, 0xfb, 0x6a, 0xd5, 0xfe, 0x4e, 0xfa, 0x50, 0xe7, + 0x18, 0x7c, 0x85, 0xc8, 0xf0, 0x6a, 0xbb, 0xc1, 0x8f, 0x6a, 0x5f, 0xdb, + 0x5c, 0xa2, 0x54, 0x0b, 0xe8, 0xa2, 0xab, 0x60, 0x30, 0x4e, 0x16, 0x6b, + 0x62, 0x20, 0x41, 0x6b, 0x63, 0x93, 0x61, 0x56, 0x68, 0x77, 0x76, 0x99, + 0x24, 0x6c, 0x7f, 0xe2, 0x1a, 0x6c, 0xba, 0x54, 0xab, 0xf6, 0xb5, 0x8d, + 0x33, 0x45, 0xe0, 0x12, 0x7b, 0xd7, 0x60, 0x07, 0xaf, 0xc1, 0x6e, 0x25, + 0xab, 0x8f, 0xe1, 0xc5, 0xc0, 0xe6, 0x6b, 0xb8, 0xad, 0x90, 0x9e, 0xfe, + 0xcd, 0xd7, 0x70, 0x38, 0x8c, 0xb3, 0x6d, 0x9c, 0x65, 0x9c, 0x3b, 0xaf, + 0xe1, 0x1c, 0x59, 0x4f, 0xcf, 0x11, 0x82, 0x0f, 0x4a, 0x74, 0xe6, 0x69, + 0xef, 0xa5, 0xda, 0xd0, 0xc4, 0x5d, 0x84, 0xf8, 0x38, 0xb2, 0x29, 0xf4, + 0xe1, 0xc6, 0x5e, 0x0f, 0xbc, 0x32, 0x88, 0x7d, 0xa2, 0x46, 0x55, 0xc8, + 0xf9, 0x8f, 0x9a, 0xb4, 0xf7, 0x62, 0xd3, 0x08, 0x75, 0x89, 0x75, 0xe2, + 0x6d, 0xd8, 0x58, 0x72, 0xca, 0x40, 0x0c, 0xbf, 0x20, 0x6d, 0x8c, 0x26, + 0xaa, 0x35, 0xaa, 0x6c, 0xcf, 0x3f, 0x11, 0x40, 0x17, 0xa7, 0xe0, 0xd3, + 0xc0, 0xe3, 0xe4, 0x98, 0x97, 0xc3, 0x7c, 0x93, 0x6d, 0x0b, 0x7e, 0x05, + 0xb0, 0xd0, 0xb5, 0x84, 0x3e, 0xbf, 0xeb, 0x55, 0x4f, 0xe7, 0x7d, 0x2c, + 0xe4, 0x5c, 0x89, 0x84, 0x98, 0xbf, 0x1a, 0xb0, 0x9e, 0x4d, 0x8f, 0x5c, + 0x45, 0x8e, 0x63, 0x92, 0x37, 0x06, 0xff, 0x01, 0x7d, 0x9f, 0x6d, 0x11, + 0x72, 0x82, 0x3f, 0xed, 0x55, 0x36, 0xf6, 0x9d, 0xad, 0xea, 0x49, 0x06, + 0xfb, 0xf2, 0xe9, 0x1c, 0xe7, 0x0f, 0x9d, 0x09, 0x2f, 0x37, 0xbe, 0x4d, + 0x3f, 0x7b, 0x60, 0x9b, 0x38, 0x5b, 0xd9, 0x26, 0x10, 0x03, 0x60, 0x53, + 0xc2, 0xcb, 0xa1, 0x7f, 0x36, 0xb2, 0xa1, 0x0c, 0x6c, 0x88, 0x69, 0x65, + 0x3a, 0x7f, 0x04, 0x7b, 0x95, 0xb4, 0xd2, 0x84, 0x0f, 0x9a, 0x46, 0x3f, + 0x82, 0x9e, 0xe0, 0x2c, 0xf0, 0x81, 0x05, 0x70, 0x49, 0x8c, 0xfe, 0x2a, + 0xb4, 0x67, 0xee, 0xbf, 0x1b, 0xa8, 0x78, 0x72, 0x30, 0xdc, 0xff, 0x17, + 0xa1, 0x0f, 0x88, 0x70, 0x31, 0x9e, 0xac, 0x36, 0x81, 0x5c, 0x68, 0xa2, + 0x65, 0x68, 0xec, 0xcf, 0x8b, 0x3e, 0xe7, 0x30, 0x9c, 0xbf, 0x3c, 0x1e, + 0xfa, 0x45, 0xce, 0x5b, 0x92, 0x21, 0x4f, 0x73, 0x51, 0x5c, 0x94, 0xf6, + 0x86, 0x18, 0x65, 0x95, 0x5d, 0x99, 0xd3, 0x68, 0xd3, 0xb9, 0x24, 0xd6, + 0x61, 0xae, 0x85, 0x73, 0xc3, 0x2f, 0x21, 0x0f, 0xe2, 0xdc, 0x14, 0xeb, + 0x3b, 0x43, 0x9b, 0xbf, 0x44, 0x65, 0xf8, 0x54, 0xc3, 0xe1, 0xf7, 0x5e, + 0x2f, 0x75, 0x61, 0xdc, 0xc4, 0x5e, 0xf0, 0x13, 0xba, 0xe4, 0x33, 0x62, + 0x41, 0xfa, 0x06, 0xce, 0xaf, 0xb0, 0xd6, 0xc2, 0x5a, 0xf6, 0xbb, 0xbc, + 0xf6, 0x3c, 0xe8, 0xc0, 0xb8, 0xc9, 0x30, 0xec, 0xa3, 0x82, 0xf7, 0xbc, + 0xdc, 0x1e, 0x73, 0x82, 0x12, 0x21, 0x5e, 0xab, 0x0d, 0xef, 0xc6, 0xb5, + 0x9c, 0xd3, 0x04, 0x17, 0x74, 0x87, 0xf1, 0x47, 0x79, 0x18, 0xd1, 0xf4, + 0x09, 0xe4, 0x71, 0x4e, 0x07, 0xe2, 0x14, 0x8f, 0x86, 0x4c, 0x75, 0xce, + 0x08, 0xe6, 0x81, 0xfe, 0xf5, 0xe3, 0xbb, 0x53, 0xd7, 0xfc, 0x23, 0x5b, + 0x17, 0x15, 0x10, 0x1f, 0xc0, 0x27, 0x6b, 0x8a, 0x73, 0xbf, 0x62, 0x53, + 0xa2, 0xc4, 0xdc, 0x18, 0x7c, 0xa2, 0xca, 0xa3, 0x2e, 0xf8, 0x1b, 0xe5, + 0x66, 0x82, 0xd7, 0x05, 0xf0, 0xd7, 0x82, 0xfe, 0x8c, 0x03, 0x96, 0x8e, + 0x00, 0x07, 0xc7, 0x6a, 0x57, 0xe4, 0x53, 0x54, 0x36, 0x39, 0xa7, 0xe8, + 0x64, 0xfa, 0x0a, 0x6c, 0xfb, 0x22, 0xbf, 0x19, 0x73, 0xdc, 0x7f, 0xac, + 0x57, 0xc9, 0xab, 0x9b, 0xc7, 0x13, 0x22, 0xdf, 0xbb, 0x61, 0xfe, 0x9f, + 0xbb, 0x15, 0x6d, 0x72, 0x8c, 0xf9, 0x7f, 0xdb, 0x30, 0xfe, 0xe3, 0xd4, + 0xfa, 0xf1, 0xdd, 0xdb, 0x42, 0xfd, 0x43, 0xff, 0xf1, 0x90, 0x5e, 0xd0, + 0xb6, 0x46, 0x6b, 0x94, 0x2b, 0x53, 0x5d, 0x20, 0x5f, 0xf4, 0x72, 0xbb, + 0xac, 0x2a, 0x6c, 0xaa, 0xd4, 0x02, 0xdd, 0x6b, 0x71, 0x6c, 0x6d, 0x4d, + 0xe5, 0xda, 0x1a, 0xe5, 0xe7, 0x4b, 0xad, 0x00, 0x79, 0x56, 0x7b, 0xcc, + 0xcb, 0xa2, 0x5f, 0xc1, 0x3e, 0x05, 0x9a, 0xf6, 0x2f, 0x16, 0x84, 0x73, + 0x4c, 0xe6, 0x89, 0xc2, 0x79, 0x4a, 0x2b, 0x2d, 0x73, 0xfe, 0x08, 0x5b, + 0x72, 0x64, 0xdd, 0x80, 0x98, 0x72, 0x5c, 0x2b, 0x9c, 0x5e, 0x40, 0xfe, + 0xb8, 0x82, 0xdf, 0x19, 0xfc, 0x9a, 0xf8, 0x45, 0xf9, 0xfb, 0x33, 0xc8, + 0xff, 0xa5, 0x7f, 0x45, 0x2c, 0x50, 0xfb, 0xff, 0x62, 0x05, 0x3a, 0xb6, + 0x90, 0xa6, 0x6f, 0x3b, 0xa2, 0x5f, 0x28, 0x9f, 0x52, 0x40, 0xde, 0x6b, + 0xbe, 0x4d, 0xbf, 0x13, 0xe6, 0x50, 0x44, 0xaf, 0xd7, 0xc1, 0xc7, 0x91, + 0xfd, 0xa1, 0xbe, 0x66, 0x1f, 0xf4, 0xa4, 0xef, 0x0c, 0x73, 0x24, 0xe4, + 0x6a, 0x05, 0xb9, 0xea, 0xfb, 0xe0, 0x8d, 0x46, 0x6f, 0x41, 0x7f, 0x5e, + 0xaf, 0x77, 0x81, 0x1e, 0x87, 0xca, 0x93, 0xf6, 0x18, 0x69, 0x43, 0xe6, + 0x26, 0xad, 0x0b, 0x36, 0x0c, 0xfb, 0x96, 0x63, 0x4a, 0x74, 0xe4, 0xcf, + 0xcd, 0x2c, 0xd5, 0x04, 0xd6, 0x22, 0xef, 0xc9, 0xa1, 0x0f, 0xd9, 0x5f, + 0xa9, 0x33, 0x9c, 0xa0, 0x37, 0xea, 0x3a, 0xbd, 0x89, 0xbc, 0xeb, 0x2d, + 0xe7, 0xdc, 0x0c, 0x62, 0xd6, 0x00, 0xe2, 0x03, 0x6a, 0x98, 0x5d, 0xec, + 0xa3, 0x77, 0x1a, 0x78, 0x96, 0xf0, 0xbb, 0x13, 0x79, 0xe3, 0xf5, 0x61, + 0x3e, 0x6d, 0x3d, 0xd3, 0x96, 0x00, 0x0c, 0xaf, 0x37, 0x40, 0x5b, 0x0f, + 0xe4, 0x6f, 0x9b, 0x53, 0xf4, 0xcb, 0x5e, 0x99, 0xab, 0x68, 0x3c, 0xaf, + 0xfc, 0xd2, 0x27, 0xe7, 0x99, 0xcf, 0x3a, 0x74, 0x9c, 0xc7, 0xfc, 0x8e, + 0xfd, 0x27, 0xe3, 0xb3, 0xc7, 0x0a, 0x38, 0xcc, 0x95, 0xba, 0xea, 0x47, + 0x73, 0xa4, 0x45, 0x31, 0x8c, 0xfd, 0x62, 0x89, 0x0a, 0x92, 0xef, 0x13, + 0x24, 0x65, 0xb0, 0x4e, 0x9e, 0x94, 0x30, 0xf2, 0xf5, 0x99, 0x39, 0x87, + 0xe5, 0x0a, 0xff, 0x56, 0x8b, 0xe4, 0xca, 0x32, 0xea, 0xa4, 0x6a, 0xfd, + 0x29, 0xc8, 0x55, 0x84, 0xf5, 0x01, 0xec, 0x7b, 0x81, 0xe5, 0x8b, 0xba, + 0xb1, 0x8e, 0xbc, 0xa7, 0x4e, 0x29, 0x55, 0xdf, 0x1c, 0x47, 0x5d, 0x00, + 0xf9, 0xd5, 0x16, 0x80, 0x03, 0x36, 0x5a, 0x5b, 0xc1, 0x13, 0xb5, 0x48, + 0xed, 0x0c, 0x9e, 0x83, 0x78, 0x36, 0x59, 0x37, 0xc3, 0x3c, 0xe3, 0x13, + 0xf4, 0xc0, 0x9e, 0x4a, 0x6c, 0x4f, 0xf4, 0x8f, 0xad, 0x3c, 0xfd, 0x43, + 0x6b, 0x8c, 0x7e, 0xd4, 0xca, 0xd1, 0x0f, 0x5b, 0x2e, 0xfd, 0x7d, 0x6b, + 0x84, 0x9e, 0x6d, 0x65, 0xb9, 0x96, 0x43, 0xce, 0x64, 0x71, 0xce, 0x44, + 0x0f, 0xfa, 0xb7, 0xc3, 0xde, 0x59, 0xfe, 0xe7, 0x66, 0x0a, 0xcd, 0x21, + 0x2a, 0x9f, 0x80, 0x6f, 0x76, 0x6f, 0xe3, 0x1a, 0x94, 0x1e, 0x73, 0xb9, + 0x86, 0xe8, 0xe0, 0xf7, 0xa8, 0x23, 0xe0, 0xbb, 0xe1, 0xcb, 0xa6, 0xd2, + 0xf6, 0x39, 0x4f, 0x1f, 0x08, 0x7d, 0xc0, 0x5d, 0x29, 0xea, 0xc2, 0x5e, + 0xf0, 0x7f, 0x17, 0x9f, 0x86, 0x0d, 0xc8, 0x1a, 0x28, 0x01, 0x5f, 0xc3, + 0x79, 0x80, 0xc1, 0x76, 0xcc, 0xf5, 0x87, 0xe5, 0xe9, 0x5c, 0x17, 0xb2, + 0x3d, 0xeb, 0x08, 0x1a, 0x0c, 0x37, 0x69, 0xb2, 0xdc, 0x0c, 0x87, 0x7d, + 0x6a, 0x21, 0xf4, 0x6f, 0x89, 0x50, 0x2f, 0x4d, 0xcc, 0x3f, 0x15, 0xfa, + 0xe3, 0x8d, 0xfb, 0x20, 0x56, 0x20, 0x97, 0x54, 0xeb, 0x18, 0x56, 0x0b, + 0x61, 0xfb, 0xc3, 0xb9, 0x24, 0xf8, 0xed, 0x52, 0xd9, 0x7f, 0x43, 0xe3, + 0x1c, 0x5b, 0x38, 0xcc, 0xff, 0x11, 0x8c, 0x2f, 0x87, 0xe3, 0xaf, 0xd0, + 0xf4, 0x22, 0x81, 0xd6, 0xd7, 0xb4, 0xa2, 0x1c, 0x8f, 0x61, 0x2c, 0x30, + 0xd6, 0xb9, 0x6e, 0xe0, 0x0c, 0x23, 0xc5, 0xba, 0x2e, 0x9c, 0x71, 0xf0, + 0x71, 0x12, 0xbf, 0x82, 0xfc, 0x3d, 0xe2, 0x0f, 0x15, 0xde, 0x41, 0xbc, + 0xd0, 0x3a, 0xa2, 0xdc, 0x67, 0x3b, 0x6a, 0xcf, 0x20, 0x38, 0x84, 0x5a, + 0xdd, 0x4a, 0x19, 0xf4, 0x2f, 0xf3, 0xb6, 0x79, 0x48, 0xcc, 0xe1, 0x4c, + 0x41, 0x30, 0xe1, 0xd8, 0x95, 0x82, 0xe8, 0xa6, 0x9f, 0x1f, 0xe7, 0xb8, + 0x5b, 0x9f, 0x79, 0x01, 0xba, 0xd7, 0x58, 0xe9, 0xa4, 0x46, 0xc3, 0xa0, + 0x2b, 0xa3, 0x43, 0xa0, 0xd3, 0xa4, 0x46, 0x33, 0x85, 0x5c, 0x6e, 0x33, + 0xa1, 0x3c, 0x94, 0x0e, 0x43, 0xcf, 0x67, 0xa5, 0x8f, 0xf6, 0x1c, 0x3c, + 0x9b, 0x1f, 0xf4, 0xae, 0x3f, 0x73, 0x09, 0xf4, 0xf7, 0xa0, 0x0a, 0xd9, + 0x2e, 0xe5, 0x5c, 0xf6, 0x87, 0x4c, 0x4f, 0x20, 0x6e, 0x19, 0x43, 0xe6, + 0x7e, 0xf1, 0xab, 0xe0, 0x0e, 0x83, 0x65, 0xf7, 0xaa, 0xac, 0x77, 0x64, + 0x9c, 0xc3, 0x7e, 0x4b, 0x2b, 0xaf, 0x81, 0x16, 0x93, 0x9e, 0x6d, 0x6e, + 0x0f, 0xc7, 0x96, 0xe4, 0xc5, 0xb3, 0xcd, 0x2e, 0xfa, 0x61, 0x63, 0x0b, + 0x2d, 0x37, 0xf8, 0x7d, 0x27, 0x2d, 0x35, 0x86, 0xae, 0x1e, 0x15, 0x03, + 0xb4, 0x7a, 0xe3, 0x4d, 0xe6, 0x57, 0x05, 0xf2, 0x82, 0xc9, 0x8f, 0xe9, + 0xbd, 0xd1, 0x5e, 0xfa, 0xe9, 0x3d, 0x76, 0xfd, 0x7e, 0x01, 0x1b, 0x18, + 0x4d, 0xb2, 0x6d, 0xa3, 0xcf, 0xf3, 0xf6, 0x55, 0x4b, 0xb0, 0x6e, 0xff, + 0x04, 0x3c, 0xb5, 0x8f, 0x29, 0x3b, 0x60, 0xdc, 0x8c, 0x17, 0xba, 0xe1, + 0xbc, 0x08, 0x9c, 0x78, 0xd7, 0x1c, 0x02, 0xae, 0x17, 0x25, 0x2f, 0x0e, + 0xb9, 0xf6, 0x55, 0x42, 0x0e, 0x79, 0xc5, 0x19, 0xca, 0x0a, 0xb1, 0x9d, + 0x1a, 0x99, 0x9b, 0xcc, 0xf3, 0xf0, 0xff, 0xa8, 0xab, 0x2a, 0x97, 0xa9, + 0x3e, 0x73, 0xc9, 0x61, 0xfd, 0x67, 0xbf, 0xf1, 0x12, 0xf2, 0x4e, 0x93, + 0x4e, 0x34, 0xd9, 0x5f, 0x32, 0x2e, 0xce, 0xfd, 0x77, 0x9b, 0x5f, 0x13, + 0x9c, 0x23, 0xe0, 0x1d, 0xe6, 0xf5, 0x2f, 0xb1, 0x9c, 0x3b, 0x18, 0x36, + 0x6b, 0x89, 0x60, 0x03, 0x8f, 0x86, 0xcc, 0x5d, 0x82, 0xf7, 0xfb, 0x6f, + 0xec, 0xfb, 0x2e, 0x68, 0x1d, 0x02, 0x2c, 0xe2, 0x65, 0xa6, 0x7d, 0x8f, + 0x57, 0xe4, 0x1e, 0xc7, 0x9b, 0xc8, 0xf3, 0xd6, 0xf6, 0xc0, 0x5c, 0x53, + 0xe0, 0x9c, 0x86, 0x94, 0xcb, 0x95, 0x51, 0xe6, 0xef, 0x6d, 0x7d, 0x9c, + 0x63, 0xea, 0xf9, 0xbf, 0x09, 0xa2, 0x5a, 0xf3, 0x95, 0xf9, 0x49, 0xf8, + 0xe7, 0x20, 0xa8, 0xee, 0x1e, 0x52, 0x71, 0x68, 0x90, 0xdf, 0x1f, 0x90, + 0xb2, 0xa8, 0x8a, 0x4e, 0xba, 0xc3, 0xb0, 0x00, 0xcb, 0x73, 0x2f, 0x87, + 0x72, 0x84, 0x11, 0x75, 0xa1, 0xdf, 0x8c, 0xf4, 0x32, 0x05, 0x1d, 0xdb, + 0x63, 0x1e, 0x0a, 0x63, 0x32, 0xc7, 0xb4, 0x9f, 0x42, 0xe7, 0xac, 0x14, + 0xeb, 0x4d, 0xaa, 0xef, 0x9a, 0xde, 0xf0, 0xbb, 0xfa, 0x8c, 0x07, 0xda, + 0x8a, 0x0b, 0x9d, 0x54, 0xaa, 0x27, 0x90, 0x03, 0x19, 0x34, 0x97, 0xc3, + 0x18, 0x3a, 0x54, 0x6a, 0xb0, 0xce, 0x57, 0x42, 0x9d, 0x4f, 0x86, 0xb8, + 0x4f, 0x82, 0x17, 0xb6, 0xb5, 0x2a, 0xb8, 0x76, 0xda, 0x26, 0xeb, 0x5f, + 0x1d, 0xb6, 0x5c, 0xae, 0x71, 0xed, 0x89, 0xfc, 0xdb, 0x3c, 0x37, 0x33, + 0xed, 0x18, 0xa0, 0x6b, 0x44, 0x2b, 0xb7, 0x1c, 0xad, 0xec, 0x33, 0x7d, + 0xbb, 0x41, 0xb7, 0x26, 0x6b, 0xdc, 0xa5, 0xd6, 0x7b, 0xc1, 0xd2, 0xee, + 0x4d, 0xe8, 0x43, 0xe7, 0x27, 0x58, 0xae, 0x5f, 0x60, 0xba, 0xac, 0x82, + 0x60, 0x3e, 0xa7, 0xe9, 0xd4, 0xf0, 0xdf, 0xf5, 0x72, 0x3e, 0x75, 0x7a, + 0x98, 0xf1, 0x83, 0x8e, 0x74, 0x9a, 0x96, 0x7d, 0xde, 0xa3, 0x3e, 0xc3, + 0x3c, 0x2c, 0x2f, 0x98, 0xf4, 0x88, 0x94, 0xdb, 0x6b, 0xd2, 0xa6, 0xcb, + 0x2b, 0xb0, 0xa5, 0xd4, 0x90, 0x79, 0x94, 0xec, 0xab, 0x17, 0x75, 0xbb, + 0x3e, 0x05, 0x7b, 0x5e, 0x5a, 0xd4, 0x69, 0xa7, 0xac, 0xb1, 0x58, 0x36, + 0xf6, 0x31, 0x58, 0x7c, 0x78, 0xf6, 0x43, 0x6d, 0x67, 0xef, 0xa1, 0x4b, + 0x4f, 0xff, 0x16, 0x7c, 0x0d, 0xf3, 0xd5, 0xb0, 0x0e, 0x23, 0x9f, 0x58, + 0x40, 0xee, 0x51, 0x45, 0x6e, 0x5c, 0xc8, 0x30, 0x6c, 0xc4, 0xef, 0xad, + 0x92, 0xff, 0x42, 0xf2, 0x7f, 0x07, 0x55, 0xa5, 0x0d, 0x65, 0xe4, 0x3b, + 0x01, 0x1c, 0xea, 0x1d, 0x8f, 0x91, 0x2b, 0xc9, 0x77, 0xf7, 0x2a, 0x38, + 0xf6, 0x11, 0x19, 0x7e, 0x77, 0x14, 0x7b, 0x32, 0x8f, 0xa3, 0xf9, 0x6e, + 0x52, 0x36, 0x14, 0xf1, 0x1d, 0x89, 0x44, 0x33, 0x4d, 0xbf, 0x8b, 0x9a, + 0x67, 0xb2, 0x39, 0x48, 0xa5, 0xa6, 0x05, 0x19, 0xcc, 0xf4, 0xf1, 0xd9, + 0x8a, 0x2b, 0x38, 0x8f, 0x60, 0x5a, 0xef, 0xa5, 0xc3, 0x7e, 0x44, 0x4f, + 0x32, 0xa4, 0x6f, 0x32, 0x1c, 0x27, 0x42, 0x1a, 0xda, 0xf1, 0x25, 0x81, + 0x0b, 0x31, 0x3e, 0xf7, 0x57, 0x21, 0x1e, 0xf6, 0x1f, 0xa0, 0x75, 0x32, + 0x43, 0x2b, 0x3e, 0xd3, 0xb1, 0x85, 0xaa, 0x69, 0xee, 0x1f, 0x80, 0x9e, + 0x31, 0x9e, 0x4d, 0x9c, 0xc7, 0xac, 0xe3, 0xf1, 0x91, 0x66, 0x05, 0x3c, + 0x66, 0xfe, 0xf2, 0xba, 0x24, 0x2d, 0x7d, 0x85, 0xe5, 0xb7, 0x07, 0xf9, + 0x3b, 0xeb, 0xc2, 0x96, 0x50, 0xaf, 0xd4, 0x9e, 0xa5, 0x85, 0x1e, 0xc8, + 0x8a, 0xf7, 0xed, 0xa2, 0xbb, 0x61, 0xef, 0xc5, 0x06, 0xef, 0x3f, 0x09, + 0x3d, 0x7a, 0x59, 0xee, 0x5f, 0x5a, 0x19, 0x08, 0xe1, 0x19, 0xb6, 0x67, + 0x03, 0x6c, 0x27, 0xed, 0xab, 0x9b, 0xd7, 0x81, 0xff, 0x7d, 0xc0, 0x0b, + 0x3a, 0x99, 0x63, 0x78, 0xc6, 0x83, 0x75, 0x8d, 0xf4, 0x67, 0xe0, 0x49, + 0xc9, 0x5a, 0xbe, 0xd8, 0xe8, 0xa4, 0x62, 0x3d, 0xc2, 0xc5, 0x78, 0x3e, + 0x46, 0xad, 0x7b, 0x9f, 0xc4, 0x35, 0x2d, 0x71, 0xe1, 0x7d, 0x83, 0x7d, + 0xcd, 0xad, 0x80, 0x47, 0xbd, 0xee, 0x80, 0xb6, 0x54, 0x37, 0x2d, 0xc9, + 0x7a, 0xbd, 0x4b, 0xf9, 0x98, 0xd4, 0x66, 0xbc, 0xdf, 0x02, 0x5b, 0xdf, + 0x83, 0x3c, 0xa6, 0x07, 0x73, 0xd6, 0x86, 0xb9, 0x8d, 0xf4, 0x27, 0x36, + 0xd0, 0xdf, 0x89, 0x75, 0xfd, 0xd8, 0x53, 0xad, 0x2b, 0x61, 0xdd, 0xec, + 0x02, 0x6c, 0x82, 0x73, 0xf3, 0x34, 0xc7, 0xe4, 0x1b, 0x25, 0x2d, 0xb3, + 0x2b, 0xef, 0xe1, 0x5c, 0x03, 0x80, 0x8d, 0xc6, 0x8a, 0x0f, 0x75, 0xe0, + 0xf9, 0x5e, 0x43, 0xde, 0x4b, 0x40, 0x06, 0x9b, 0x53, 0x7c, 0xf6, 0x6a, + 0xe3, 0xf3, 0x78, 0x76, 0x63, 0x1b, 0xbf, 0x98, 0x57, 0x4c, 0x2f, 0xd3, + 0x0a, 0x3d, 0x25, 0xd8, 0x9b, 0x8b, 0x9a, 0x2f, 0xa5, 0x53, 0x29, 0x87, + 0x78, 0xee, 0xf3, 0x5d, 0x2d, 0xdb, 0xe5, 0xa0, 0xaa, 0x0b, 0x1c, 0x8e, + 0xeb, 0x86, 0x3c, 0xfb, 0xe1, 0x15, 0xbe, 0xaf, 0xb5, 0x10, 0x4f, 0xed, + 0x2c, 0xe1, 0xec, 0x0f, 0xaf, 0x38, 0xf4, 0x68, 0x33, 0x4b, 0x47, 0x9b, + 0xb6, 0x79, 0x3f, 0x7c, 0x40, 0x79, 0xed, 0x1e, 0x77, 0x57, 0x8a, 0xfd, + 0x96, 0x81, 0x9c, 0xb3, 0xc3, 0x51, 0x39, 0x48, 0x95, 0xeb, 0xb1, 0x05, + 0x9b, 0xef, 0x68, 0xcc, 0x06, 0x6d, 0xcc, 0x53, 0xfe, 0x2f, 0x73, 0x14, + 0xde, 0x9f, 0xfd, 0x34, 0x72, 0x12, 0x1f, 0x39, 0x89, 0x8f, 0x9c, 0xc4, + 0x47, 0x4e, 0xe2, 0x23, 0x27, 0xf1, 0x91, 0x93, 0xf8, 0xc8, 0x49, 0x7c, + 0xe4, 0x24, 0xc8, 0xff, 0x55, 0x5d, 0x30, 0x8e, 0x5c, 0x1b, 0xfe, 0xcb, + 0xff, 0x6a, 0x98, 0x53, 0x44, 0x31, 0x99, 0xe7, 0x56, 0x37, 0x79, 0x6e, + 0x74, 0x4f, 0x7c, 0x00, 0x73, 0x13, 0x61, 0xee, 0xc3, 0x6b, 0xa2, 0x98, + 0xcd, 0xeb, 0x68, 0xcc, 0x43, 0xbd, 0x59, 0x98, 0xe4, 0xdc, 0x48, 0xc5, + 0x2a, 0x95, 0x97, 0xbf, 0x8a, 0xfc, 0xc8, 0x42, 0x7e, 0x34, 0x88, 0x5c, + 0x88, 0xef, 0xb5, 0xa3, 0xfb, 0xa3, 0x82, 0x76, 0xc8, 0x1f, 0xd7, 0xbe, + 0xe6, 0x73, 0xde, 0xee, 0x58, 0x65, 0x21, 0x16, 0xfa, 0x29, 0xa0, 0xe2, + 0xe8, 0xb7, 0x90, 0x23, 0x7f, 0x4f, 0xde, 0x95, 0x4d, 0x0c, 0xb3, 0xcc, + 0x27, 0x3e, 0x25, 0x4f, 0x8e, 0xf8, 0xab, 0xee, 0xf8, 0xc4, 0x12, 0xf3, + 0x8f, 0xa8, 0xef, 0x2c, 0x18, 0x7e, 0x36, 0x41, 0xa9, 0x53, 0x5b, 0x30, + 0x67, 0x52, 0xbf, 0xbc, 0x27, 0x82, 0x28, 0xcf, 0xfe, 0x1a, 0xf2, 0x72, + 0x48, 0x9c, 0xe5, 0xdb, 0x04, 0xc6, 0xcb, 0xfe, 0xb5, 0x32, 0x53, 0x6c, + 0x54, 0xa4, 0x4e, 0x1d, 0x6a, 0x96, 0x90, 0x3f, 0xf5, 0xf6, 0x53, 0x97, + 0x81, 0x1a, 0x2a, 0xc2, 0xcd, 0x38, 0x7f, 0x99, 0x92, 0xb5, 0xcd, 0xd9, + 0x35, 0x79, 0x42, 0xd6, 0xbc, 0x4f, 0x65, 0xa6, 0x5a, 0xb7, 0x33, 0x5c, + 0xd7, 0x82, 0xd6, 0x99, 0x27, 0x81, 0x63, 0x19, 0x39, 0x81, 0x2e, 0xf7, + 0xae, 0xcc, 0xcc, 0xd6, 0xd5, 0x5d, 0x95, 0xa2, 0x01, 0xf1, 0x2f, 0xd7, + 0x45, 0xfa, 0x92, 0xba, 0xb3, 0x12, 0x12, 0x96, 0xe1, 0x18, 0xde, 0x00, + 0x1c, 0xcb, 0x2d, 0x0b, 0x58, 0x96, 0x1d, 0xd3, 0x50, 0x99, 0xa9, 0x34, + 0xda, 0x69, 0x60, 0x3c, 0x8c, 0x37, 0x3a, 0x0f, 0x9f, 0x25, 0x45, 0xe2, + 0x54, 0x10, 0x94, 0x47, 0x07, 0xc3, 0x3a, 0x12, 0xf5, 0xe3, 0x09, 0x43, + 0xea, 0xb9, 0x1a, 0x7f, 0x53, 0xc6, 0x29, 0x4b, 0xf0, 0x3c, 0x3f, 0xf1, + 0x2e, 0xf7, 0x24, 0xe6, 0x30, 0x5e, 0x8e, 0xd6, 0x8a, 0x70, 0x6d, 0x77, + 0x1b, 0x3f, 0x3b, 0xc2, 0xfd, 0x98, 0x26, 0x3e, 0xe7, 0x65, 0xec, 0xc5, + 0x74, 0xf1, 0x1a, 0x13, 0xb4, 0x41, 0x96, 0xfe, 0xff, 0x96, 0xf7, 0xed, + 0x67, 0x62, 0x9e, 0x1a, 0x80, 0xe1, 0xf5, 0x8c, 0x23, 0x82, 0xc1, 0x8b, + 0xb3, 0x0a, 0x4e, 0xac, 0xdd, 0xed, 0x7d, 0xd6, 0xbe, 0xed, 0xb4, 0x46, + 0xfb, 0x47, 0x78, 0xb2, 0x4a, 0x6e, 0x6b, 0xf0, 0xf2, 0xff, 0x0a, 0xc3, + 0x13, 0xba, 0xf8, 0x89, 0x3b, 0xd2, 0x6c, 0x5b, 0x6d, 0x1c, 0xdd, 0x35, + 0x70, 0xcd, 0xcf, 0x35, 0x3c, 0x7f, 0x47, 0x68, 0xaf, 0x4b, 0x4b, 0x61, + 0x2c, 0x83, 0x2e, 0xaa, 0xbb, 0xd4, 0x70, 0x6c, 0x70, 0x6c, 0x43, 0xe3, + 0x1c, 0x3f, 0xb2, 0x91, 0xf6, 0x7b, 0x42, 0x95, 0x9b, 0x9c, 0x59, 0x8c, + 0x7c, 0x0e, 0xfc, 0xc1, 0xb0, 0x11, 0xfa, 0xed, 0x24, 0xfc, 0x56, 0x0f, + 0xed, 0x83, 0xbf, 0xb9, 0x13, 0xfe, 0x66, 0x3f, 0xea, 0xca, 0xf1, 0x95, + 0xf6, 0xfb, 0x57, 0xae, 0x65, 0xab, 0x74, 0x58, 0xca, 0xae, 0x12, 0xe8, + 0xce, 0xc7, 0x90, 0xdf, 0x2e, 0x99, 0xa3, 0x29, 0x79, 0xc2, 0x57, 0xba, + 0xfc, 0x2d, 0x62, 0xe3, 0x3d, 0x6f, 0x16, 0x7a, 0xdd, 0x55, 0x10, 0x32, + 0xff, 0x52, 0x7c, 0xab, 0x36, 0x14, 0xdf, 0xe0, 0x53, 0x81, 0xdf, 0xa0, + 0x4a, 0xd3, 0xa4, 0x0a, 0xf6, 0xad, 0x60, 0xdf, 0x0a, 0xea, 0xc1, 0xd9, + 0x66, 0xfb, 0x77, 0xaa, 0xee, 0xb0, 0xc6, 0x66, 0xd8, 0xa8, 0x6f, 0x86, + 0xe7, 0xd2, 0xda, 0x9e, 0xc7, 0xc0, 0xbb, 0x47, 0xc1, 0xbb, 0x23, 0xa8, + 0x83, 0xfe, 0x04, 0x75, 0xd0, 0x1f, 0xa2, 0x0e, 0x3a, 0x8c, 0x3a, 0x68, + 0x0a, 0x75, 0xd0, 0x7d, 0xb0, 0xfd, 0x7b, 0x61, 0xfb, 0x93, 0xb0, 0xfd, + 0x09, 0x79, 0xc7, 0x73, 0xc8, 0xdf, 0x78, 0xef, 0x11, 0xed, 0xc5, 0xed, + 0x4d, 0x22, 0x88, 0xaf, 0x7c, 0x62, 0x9c, 0x1a, 0x2d, 0xae, 0x87, 0x5c, + 0x79, 0x7f, 0x35, 0xed, 0x4e, 0x6a, 0x53, 0xc8, 0xb9, 0xef, 0x1f, 0xe1, + 0x3a, 0x29, 0xa5, 0xee, 0x2b, 0x73, 0xf6, 0x73, 0x1e, 0xd2, 0x2e, 0xe4, + 0x6d, 0x38, 0xb3, 0x7d, 0xa6, 0xa8, 0x47, 0x35, 0x4a, 0xdf, 0x5a, 0x8d, + 0xb2, 0x3c, 0xcf, 0x35, 0xca, 0xab, 0x6b, 0x35, 0xca, 0xf2, 0x3c, 0xd7, + 0x28, 0xaf, 0xac, 0xab, 0x51, 0xae, 0x3c, 0xfd, 0xf2, 0xba, 0x1a, 0xe5, + 0xca, 0xd3, 0x2f, 0x85, 0x63, 0xa6, 0x03, 0x7e, 0xc9, 0x0d, 0x69, 0x35, + 0x5d, 0x3c, 0x7b, 0xc3, 0x7c, 0xe1, 0xfb, 0xfd, 0xeb, 0xff, 0x1f, 0x3a, + 0x6e, 0x9d, 0x1a, 0x39, 0xdf, 0xd8, 0xaa, 0xea, 0x9a, 0xf6, 0xf9, 0xde, + 0xb6, 0xf9, 0x55, 0xf9, 0x6d, 0xb4, 0x5c, 0xdb, 0xfc, 0x3e, 0xbc, 0x27, + 0xad, 0x0c, 0xdb, 0xf5, 0x02, 0x7d, 0x1c, 0xf0, 0xf7, 0x3d, 0x4f, 0x74, + 0xc9, 0xef, 0x6a, 0x9e, 0xcc, 0x91, 0x61, 0xa3, 0xa3, 0x47, 0xb7, 0x2a, + 0x3b, 0xe6, 0x7e, 0x5a, 0x53, 0xbe, 0xf9, 0x41, 0xe0, 0x01, 0xaf, 0x7d, + 0x43, 0xde, 0xe1, 0xa8, 0xf3, 0xaa, 0xbb, 0x6c, 0x23, 0xbf, 0x8a, 0x38, + 0x03, 0x59, 0x4b, 0xdc, 0x5c, 0xf3, 0x71, 0x9d, 0x18, 0xf9, 0xef, 0x08, + 0xd7, 0xcf, 0xd2, 0x8a, 0xee, 0xdb, 0x50, 0xef, 0xf1, 0x9a, 0x68, 0xdc, + 0x5e, 0x1f, 0x26, 0xc3, 0xfb, 0xac, 0x55, 0x95, 0x13, 0x49, 0x7c, 0x46, + 0x88, 0xef, 0xbf, 0x02, 0xe5, 0x37, 0x18, 0xde, 0x6c, 0x83, 0x1f, 0x47, + 0x9e, 0xc6, 0x77, 0x2b, 0x9c, 0x6f, 0x19, 0xf4, 0xee, 0x7c, 0x37, 0xbd, + 0x73, 0x1c, 0xf9, 0xa6, 0x6b, 0x67, 0x5f, 0x46, 0xbd, 0x70, 0x8a, 0xf3, + 0xe2, 0x51, 0xa6, 0x73, 0xc8, 0x9a, 0x25, 0xab, 0x5f, 0xe5, 0xd1, 0x47, + 0xb4, 0x4f, 0xd2, 0x2d, 0xc2, 0x7d, 0x7e, 0xd6, 0xb6, 0x8f, 0xd5, 0xb6, + 0x4f, 0x81, 0xed, 0xad, 0xf1, 0x75, 0x9c, 0xb9, 0xb2, 0xfd, 0x26, 0x33, + 0x1d, 0xd6, 0x52, 0x8f, 0x8c, 0x6e, 0xa6, 0xfa, 0x80, 0x7d, 0xee, 0x15, + 0xe4, 0xda, 0xe5, 0x51, 0xcc, 0xa5, 0x87, 0xf0, 0x8e, 0xe7, 0xed, 0x06, + 0x09, 0xfb, 0x5c, 0x83, 0x90, 0x4c, 0x77, 0xd9, 0x15, 0xbe, 0x63, 0x4b, + 0x0b, 0xee, 0x4b, 0xda, 0x1a, 0xa1, 0xfd, 0x66, 0x2e, 0xe2, 0xcc, 0x53, + 0xa8, 0x99, 0x8e, 0xa8, 0xbb, 0xaf, 0x70, 0x9f, 0x5b, 0xb4, 0x8b, 0x32, + 0xaf, 0xcd, 0x69, 0x95, 0xb4, 0x3a, 0xe3, 0x37, 0x60, 0xeb, 0xba, 0x60, + 0xd8, 0x77, 0x81, 0x5b, 0xa3, 0xa5, 0xe3, 0xba, 0xbc, 0xeb, 0x2c, 0x8f, + 0xb2, 0xac, 0xf9, 0x79, 0x3d, 0xde, 0x45, 0x67, 0xfa, 0xdb, 0xf0, 0x4c, + 0x5f, 0x0a, 0x6b, 0xed, 0xe8, 0x4c, 0x09, 0x7a, 0x63, 0xde, 0x04, 0xec, + 0x08, 0xf8, 0x51, 0xa2, 0x95, 0x96, 0xf5, 0x39, 0x78, 0x6a, 0x6d, 0xbc, + 0x31, 0x36, 0xc8, 0x30, 0xaa, 0x59, 0xc0, 0x83, 0x89, 0x0c, 0xec, 0x70, + 0xba, 0x3f, 0xba, 0x83, 0xd5, 0x1d, 0xa1, 0xa9, 0xda, 0x9b, 0xe7, 0x07, + 0x61, 0x8b, 0x16, 0xec, 0x93, 0xf3, 0x9d, 0x12, 0xd7, 0x19, 0xe1, 0xf7, + 0x4b, 0xdb, 0x9c, 0xa4, 0x2c, 0x6a, 0x15, 0x3e, 0x7f, 0x9e, 0x96, 0x5b, + 0x11, 0x0d, 0x39, 0xd8, 0xe3, 0x18, 0x7e, 0x23, 0x78, 0xe7, 0xe2, 0xc7, + 0x75, 0x4e, 0x81, 0x1e, 0x93, 0x79, 0x34, 0xf2, 0xe4, 0x61, 0xa6, 0xef, + 0x00, 0xd6, 0xb3, 0x3e, 0xb3, 0x9e, 0x1e, 0x20, 0x6f, 0x80, 0x7d, 0x45, + 0x06, 0xb8, 0x01, 0xe3, 0xbf, 0x0e, 0x5b, 0x1f, 0xc4, 0xd3, 0x36, 0xcb, + 0xcc, 0x5b, 0x89, 0x3f, 0x08, 0xf4, 0x1c, 0x7f, 0x3b, 0x18, 0x0f, 0xc7, + 0x43, 0xe6, 0xdd, 0xac, 0x7b, 0x99, 0x1d, 0x74, 0x6e, 0x31, 0x8a, 0x61, + 0x33, 0xb0, 0x41, 0xbe, 0x53, 0x1d, 0x07, 0x5f, 0x78, 0xac, 0x85, 0xb1, + 0x0c, 0xf3, 0xcb, 0x0b, 0x38, 0x77, 0x9e, 0x4e, 0xa1, 0x66, 0xa7, 0x01, + 0x7e, 0x22, 0x57, 0xf5, 0xb7, 0x84, 0xfa, 0xbe, 0x1e, 0x5e, 0x77, 0xb8, + 0x3f, 0x0e, 0xfa, 0x8c, 0x36, 0x78, 0x86, 0x51, 0xb5, 0xc5, 0x45, 0x42, + 0x2c, 0xcd, 0x04, 0xb7, 0x8b, 0xfc, 0x7d, 0xf4, 0x80, 0x3c, 0x53, 0x9e, + 0x0e, 0x2f, 0x06, 0x81, 0x97, 0x1b, 0xca, 0x2e, 0x93, 0x9d, 0x7d, 0x92, + 0xf6, 0x98, 0xfb, 0x48, 0x97, 0xdf, 0xe0, 0x50, 0x13, 0xdf, 0xde, 0x91, + 0x0f, 0x82, 0x93, 0xa0, 0xfd, 0x05, 0xb9, 0xcf, 0x7d, 0xa0, 0x1f, 0xbc, + 0x92, 0xf5, 0x04, 0xd3, 0x0a, 0xde, 0xa4, 0x99, 0xde, 0x24, 0x1d, 0x6e, + 0x9d, 0x0f, 0x65, 0xf3, 0x28, 0x79, 0xfe, 0xdb, 0x3a, 0xdf, 0x47, 0x97, + 0x5b, 0x4f, 0x86, 0xb4, 0xe5, 0x41, 0x2f, 0xf6, 0x6f, 0xbd, 0x90, 0x66, + 0xdf, 0xc0, 0x32, 0xf7, 0x90, 0xf1, 0x79, 0xa3, 0xcf, 0x40, 0x07, 0x3f, + 0xcd, 0x0f, 0xa4, 0x68, 0xbd, 0x1f, 0x60, 0xb8, 0xd4, 0x75, 0x74, 0x85, + 0xe9, 0x20, 0xe9, 0x3f, 0x85, 0xb3, 0x19, 0xf4, 0x30, 0x3e, 0x7d, 0x83, + 0x2f, 0xa8, 0xc8, 0xe7, 0xaa, 0xce, 0xbe, 0x89, 0xe3, 0x14, 0xeb, 0x70, + 0x0f, 0xfc, 0x1f, 0x74, 0x10, 0x76, 0x5c, 0x5c, 0xe4, 0x3b, 0x85, 0x61, + 0xbe, 0x87, 0x3a, 0x53, 0x82, 0x6c, 0x97, 0xf8, 0xbb, 0x60, 0x5a, 0xe5, + 0x82, 0xaa, 0x76, 0xb2, 0xd8, 0x17, 0x32, 0xaf, 0xa5, 0x9f, 0x2c, 0xc9, + 0xef, 0x80, 0x29, 0xac, 0x09, 0xf0, 0x6c, 0xff, 0x9b, 0x88, 0x9f, 0x14, + 0xd4, 0xdf, 0x44, 0x84, 0xdf, 0x64, 0x1b, 0x2a, 0x07, 0x78, 0xb8, 0x69, + 0xd0, 0x54, 0x33, 0xfa, 0x1b, 0x09, 0x96, 0x83, 0x83, 0x3a, 0x3e, 0x8a, + 0xfb, 0x81, 0x8c, 0x2f, 0xd5, 0x75, 0xb2, 0xfc, 0x66, 0x98, 0xcf, 0x70, + 0xfe, 0xce, 0x3c, 0xc4, 0x78, 0x59, 0xc9, 0x6f, 0x49, 0xec, 0x84, 0xfc, + 0xc0, 0x73, 0xdf, 0x80, 0x2d, 0x65, 0xc2, 0x98, 0x6c, 0x72, 0x7d, 0x18, + 0xd6, 0xac, 0xdb, 0xa9, 0x3a, 0xc9, 0xef, 0x13, 0xf4, 0xfa, 0xfc, 0xa0, + 0x7c, 0x5f, 0xa6, 0x44, 0xf8, 0x9e, 0xc7, 0x29, 0x2a, 0xcb, 0xf7, 0xf7, + 0x86, 0xf8, 0x50, 0x63, 0xdd, 0x1b, 0x8d, 0x33, 0x90, 0xa3, 0x82, 0x9b, + 0x46, 0x2c, 0x7b, 0x0c, 0x71, 0x6c, 0x1a, 0x7c, 0x2f, 0x4e, 0x54, 0x68, + 0x87, 0xc3, 0x3a, 0x0e, 0x99, 0xa5, 0x58, 0xc7, 0x58, 0xbf, 0x18, 0xa6, + 0x17, 0x79, 0x26, 0xce, 0x3b, 0x4a, 0x53, 0x7a, 0xfe, 0xfd, 0x83, 0xe5, + 0x9a, 0x6d, 0x16, 0xe8, 0xa3, 0xc0, 0x33, 0x78, 0xbc, 0x7a, 0xf0, 0x61, + 0x75, 0x4f, 0x2f, 0x44, 0xfe, 0xd2, 0xc1, 0xb2, 0xea, 0xe3, 0xcc, 0xef, + 0x87, 0x7d, 0x86, 0xd3, 0xe5, 0xf7, 0xd3, 0x7f, 0xbf, 0xd5, 0xa0, 0x8b, + 0xb7, 0x06, 0xc1, 0xfd, 0xfc, 0x0d, 0x27, 0xac, 0x41, 0xd5, 0x77, 0x71, + 0x8e, 0x13, 0xa8, 0x37, 0x46, 0x2d, 0xad, 0x04, 0xdb, 0x3d, 0xe5, 0xa3, + 0x5e, 0x11, 0xf6, 0xd8, 0xaa, 0x30, 0x11, 0x7f, 0xb9, 0x96, 0xff, 0xcd, + 0x7e, 0xfe, 0x26, 0x3c, 0xe7, 0xf2, 0x9a, 0x6d, 0xea, 0xae, 0xea, 0xe6, + 0xdb, 0xa4, 0xcf, 0x25, 0x0a, 0xe3, 0xd0, 0xcd, 0xed, 0xf6, 0xd1, 0x9e, + 0x23, 0xb2, 0x5d, 0xd0, 0x94, 0x01, 0x7a, 0xaa, 0xb5, 0x28, 0xdf, 0xe2, + 0xef, 0xfd, 0xab, 0x07, 0xbf, 0xdb, 0xbc, 0x74, 0x70, 0x16, 0xf2, 0xe1, + 0x33, 0xcd, 0x36, 0x23, 0xfd, 0x8b, 0x72, 0x7e, 0xee, 0x23, 0xfe, 0xfb, + 0x88, 0xff, 0x3e, 0xe2, 0xbf, 0x8f, 0xf8, 0xef, 0x23, 0xfe, 0xfb, 0x88, + 0xff, 0xe0, 0xe1, 0x0f, 0xa0, 0x2f, 0xe7, 0xfd, 0x89, 0x30, 0xdf, 0x7a, + 0x7c, 0x2d, 0xdf, 0x3a, 0xd7, 0xe2, 0x6f, 0x3f, 0x92, 0x96, 0x4a, 0x85, + 0x54, 0xbe, 0x4a, 0x82, 0xf3, 0x9b, 0x28, 0x5f, 0xbd, 0xfe, 0x37, 0x0c, + 0x05, 0xc7, 0xb9, 0x1a, 0xc3, 0x55, 0x34, 0xe1, 0x30, 0x9c, 0xca, 0xd7, + 0xb8, 0x46, 0x5a, 0x0f, 0xc3, 0xdf, 0xc9, 0xd8, 0xb7, 0xa9, 0x6f, 0x34, + 0xea, 0x7b, 0xd0, 0xe3, 0x5f, 0xf7, 0x10, 0x8b, 0xcb, 0x4d, 0x19, 0x8f, + 0x31, 0x7e, 0x06, 0x63, 0x83, 0xf5, 0x8f, 0xdf, 0xdd, 0xc3, 0x75, 0x41, + 0xb9, 0x89, 0xbc, 0x68, 0x39, 0xca, 0x85, 0x00, 0xe7, 0xbf, 0xa9, 0x95, + 0xea, 0x2c, 0x67, 0x41, 0xb3, 0x69, 0x30, 0xc5, 0x69, 0xaf, 0x75, 0x5e, + 0x96, 0xb5, 0x8e, 0xfa, 0x9b, 0x9e, 0x11, 0xd0, 0x16, 0xdd, 0xfd, 0x12, + 0xe9, 0xf3, 0x69, 0xf9, 0x77, 0x00, 0x29, 0x67, 0x58, 0xfe, 0x3d, 0x42, + 0x1f, 0xf6, 0x11, 0xf3, 0x3b, 0xdb, 0xee, 0x56, 0xa9, 0xa0, 0x7c, 0x76, + 0xa7, 0xfa, 0x3b, 0x08, 0x91, 0x86, 0xed, 0xde, 0xb6, 0x0d, 0x67, 0x83, + 0x5c, 0x5f, 0xdd, 0x2a, 0xf3, 0x67, 0xf8, 0xd1, 0x93, 0xc3, 0x7d, 0x03, + 0xd4, 0xb3, 0x9d, 0x4e, 0x0d, 0x73, 0xad, 0xb5, 0x19, 0xf8, 0x78, 0xad, + 0x9d, 0x2d, 0x88, 0xed, 0x74, 0x7a, 0x11, 0x7e, 0x76, 0xd1, 0x76, 0x59, + 0x97, 0x97, 0x86, 0xd3, 0xf0, 0xcf, 0x63, 0x03, 0x1c, 0x9f, 0x97, 0x5b, + 0xac, 0x2b, 0x7d, 0x80, 0x1f, 0x84, 0x5e, 0x6e, 0x82, 0x3d, 0x09, 0xec, + 0x1f, 0xe1, 0xfe, 0xb9, 0xc4, 0xdd, 0xe7, 0xec, 0xd9, 0x26, 0x75, 0x43, + 0xd8, 0xa6, 0x25, 0x40, 0xfb, 0x27, 0x6a, 0x44, 0x97, 0xf8, 0x6c, 0xb3, + 0x7e, 0xfb, 0xb7, 0xba, 0x37, 0xb5, 0x72, 0x9d, 0xff, 0x0e, 0x61, 0x98, + 0xf6, 0x41, 0xbf, 0x4c, 0xe7, 0x4d, 0xed, 0x81, 0xc6, 0xff, 0x14, 0x6e, + 0x75, 0xb1, 0x71, 0x5c, 0x55, 0xf8, 0xdc, 0x59, 0xaf, 0xed, 0x38, 0x6b, + 0x67, 0xe2, 0x6c, 0xec, 0xb5, 0x15, 0xc4, 0xce, 0x7a, 0x12, 0x4f, 0xb5, + 0x8e, 0x3a, 0xb6, 0x12, 0xb4, 0x42, 0x96, 0x58, 0xed, 0x7a, 0x5d, 0x87, + 0x92, 0xb2, 0x85, 0x50, 0x05, 0x09, 0x55, 0x96, 0x9d, 0xd2, 0x54, 0x80, + 0x90, 0xfa, 0x80, 0x78, 0xcb, 0x6a, 0x6d, 0x87, 0xa4, 0xec, 0x76, 0x6d, + 0x62, 0xd7, 0x2f, 0x3c, 0x2c, 0xeb, 0x75, 0x6a, 0xbb, 0x9b, 0xac, 0x42, + 0xfb, 0x50, 0x9e, 0x62, 0x99, 0x92, 0xc2, 0x4b, 0x85, 0xc4, 0x03, 0x02, + 0x54, 0xa9, 0x4a, 0xda, 0x34, 0x0f, 0x25, 0x11, 0xbc, 0x50, 0x0a, 0xd2, + 0xf0, 0x7d, 0x77, 0x66, 0x1d, 0x27, 0x50, 0x61, 0x69, 0x35, 0x77, 0xee, + 0xdc, 0x3b, 0x73, 0x7f, 0xce, 0xf9, 0xce, 0x77, 0xce, 0x3d, 0x66, 0x1b, + 0x1b, 0x65, 0xfa, 0xd3, 0xab, 0x6a, 0xa6, 0xda, 0x2b, 0x0b, 0x90, 0xe3, + 0xe2, 0x48, 0x38, 0x88, 0x97, 0x76, 0x05, 0xfa, 0x0c, 0xc7, 0xdf, 0xb7, + 0x57, 0x9a, 0x57, 0x16, 0xcd, 0x4e, 0xcd, 0xab, 0x1e, 0x7d, 0x76, 0x0a, + 0x63, 0x8a, 0x61, 0x1d, 0xba, 0xfb, 0x34, 0x36, 0x19, 0xbc, 0xef, 0x7f, + 0xec, 0xbe, 0xef, 0xb1, 0xfb, 0xc3, 0xff, 0xa3, 0x3d, 0xcb, 0x8f, 0xcb, + 0x03, 0xc7, 0x69, 0xa5, 0xf8, 0x95, 0x62, 0xc9, 0x36, 0x66, 0x4b, 0x56, + 0x9a, 0xbc, 0x20, 0x2b, 0x9e, 0xca, 0xba, 0xed, 0xc0, 0xbb, 0x76, 0x99, + 0x5f, 0x86, 0xcc, 0x63, 0x1e, 0x1d, 0x36, 0xcf, 0xb4, 0x13, 0x7d, 0xd4, + 0x99, 0x4e, 0x6c, 0x83, 0x61, 0x0f, 0xc5, 0xd0, 0xce, 0x7b, 0xc9, 0x4d, + 0x9a, 0xe7, 0x74, 0x1c, 0x86, 0x7c, 0xc6, 0x53, 0x45, 0x9d, 0x9f, 0xc1, + 0x36, 0x6d, 0x72, 0xc7, 0xce, 0xf4, 0x06, 0xf9, 0x3e, 0xf0, 0x5b, 0xc7, + 0xfa, 0xc8, 0x35, 0x5e, 0x74, 0x77, 0xeb, 0xcc, 0xdb, 0xc2, 0x3c, 0x2a, + 0x08, 0xcd, 0xb3, 0x22, 0xd5, 0xba, 0xc8, 0xeb, 0xf8, 0xfd, 0xae, 0x1e, + 0xf8, 0x0a, 0x8a, 0x3e, 0xf3, 0xb8, 0x6c, 0x55, 0xbe, 0x2c, 0x0d, 0xd8, + 0x9f, 0x4d, 0xd7, 0xf3, 0xee, 0xb9, 0x71, 0xbd, 0xe6, 0x3f, 0x29, 0x29, + 0x49, 0x8c, 0xd2, 0xbe, 0xb5, 0xcb, 0x4f, 0x97, 0xdb, 0x64, 0xdb, 0xb4, + 0xcc, 0x7b, 0xc2, 0x5c, 0xb6, 0x98, 0x4c, 0x45, 0x43, 0x9a, 0xa3, 0xca, + 0xb7, 0xc0, 0xa0, 0xf1, 0xec, 0xee, 0xf2, 0x33, 0x7d, 0x8c, 0x9d, 0x7c, + 0xb4, 0xcc, 0x7b, 0x03, 0x57, 0x43, 0x76, 0xec, 0x10, 0xb8, 0x2c, 0x40, + 0xc8, 0xe4, 0xba, 0x73, 0xbe, 0xcf, 0x71, 0x6c, 0xa8, 0xa3, 0x2f, 0xda, + 0x2e, 0xc5, 0xa3, 0xc0, 0x44, 0x35, 0xa4, 0x73, 0x8a, 0x76, 0xa2, 0x1a, + 0xa3, 0x43, 0x35, 0xe6, 0xc8, 0x99, 0xfb, 0x35, 0x5e, 0x67, 0xae, 0x7d, + 0x5f, 0xcf, 0x05, 0xe5, 0x42, 0xcd, 0xa5, 0xac, 0x9a, 0xb2, 0x09, 0x5d, + 0xdb, 0x68, 0x2e, 0xf5, 0x73, 0xaf, 0xb6, 0x9a, 0x3f, 0xe8, 0xf3, 0x7d, + 0x2d, 0xd6, 0xfd, 0xb0, 0xcf, 0xaf, 0x8b, 0x07, 0xbe, 0x13, 0x7d, 0xac, + 0x2a, 0xe6, 0xf6, 0xb2, 0x34, 0x57, 0x7f, 0x2c, 0x6f, 0x57, 0x7e, 0x24, + 0xbf, 0x5a, 0x3d, 0x0b, 0xfe, 0x61, 0x55, 0x0b, 0xb0, 0x27, 0x37, 0x9a, + 0x9e, 0x77, 0xc3, 0x3d, 0x03, 0x5f, 0xc1, 0xf3, 0xfe, 0xe0, 0x6e, 0x4b, + 0x62, 0xec, 0x3b, 0x98, 0x73, 0x1e, 0x3a, 0x44, 0x2c, 0x9c, 0x82, 0xbc, + 0x25, 0xfb, 0xa5, 0x2b, 0xa2, 0xe5, 0x64, 0x68, 0x2c, 0x8c, 0x39, 0x18, + 0x01, 0x27, 0xe7, 0x5c, 0x46, 0xfa, 0x29, 0x33, 0x46, 0xf3, 0x15, 0x7c, + 0x3f, 0x0c, 0xbd, 0xd8, 0x8f, 0x9f, 0x92, 0x7b, 0xa3, 0x18, 0xeb, 0x28, + 0x65, 0x2f, 0x2c, 0x89, 0x27, 0x31, 0x8f, 0x7c, 0x9b, 0xdc, 0x2f, 0x5d, + 0xe9, 0x63, 0x5c, 0xee, 0x7e, 0x89, 0x65, 0xe3, 0x4b, 0x3d, 0xe2, 0x49, + 0x1b, 0x6c, 0xf9, 0xfc, 0x09, 0x9f, 0x37, 0xfd, 0x5a, 0x0d, 0xa3, 0xbd, + 0x5d, 0x78, 0x47, 0x91, 0xe7, 0x15, 0xbc, 0x30, 0x78, 0x79, 0x0e, 0x7c, + 0x28, 0xd3, 0xbc, 0x20, 0x3b, 0xa3, 0x11, 0xb4, 0x21, 0x5f, 0xd1, 0x58, + 0x22, 0xd9, 0x12, 0x73, 0xb0, 0x98, 0x0f, 0x85, 0x31, 0x9e, 0x21, 0x6e, + 0x70, 0x8c, 0xed, 0x3c, 0xb7, 0x0b, 0xea, 0x6c, 0xc8, 0x08, 0xeb, 0x28, + 0xdf, 0x69, 0xcd, 0xa9, 0x60, 0x43, 0xf1, 0xbe, 0x11, 0xc9, 0xe8, 0x72, + 0x0f, 0xde, 0x77, 0x41, 0xe7, 0x25, 0xfa, 0xef, 0x4c, 0xa1, 0x0d, 0x71, + 0x26, 0x05, 0x2e, 0xf1, 0xa1, 0x9a, 0x00, 0xbd, 0x99, 0x29, 0xf5, 0xc9, + 0x84, 0xb9, 0x6f, 0xcf, 0x1c, 0x0b, 0xda, 0x57, 0x30, 0x8c, 0x91, 0x60, + 0x4c, 0x3d, 0x7b, 0xc6, 0xc4, 0xfe, 0xf8, 0xc1, 0xc7, 0xcd, 0x2c, 0x2f, + 0x02, 0xa7, 0x16, 0x7f, 0x9b, 0x71, 0x9f, 0x97, 0x6c, 0xb4, 0x5d, 0xfb, + 0x36, 0x35, 0xec, 0x4b, 0xb6, 0xc4, 0x78, 0xd4, 0xb7, 0x81, 0x43, 0xfb, + 0x82, 0x3a, 0xb6, 0x15, 0x23, 0x83, 0xb5, 0x4f, 0x6b, 0x3d, 0x64, 0xdd, + 0x17, 0x25, 0xb3, 0x98, 0x97, 0x49, 0xdd, 0x8f, 0x6b, 0x38, 0xa8, 0x79, + 0x08, 0x75, 0x35, 0x71, 0x08, 0x6b, 0x99, 0x0c, 0x07, 0x6d, 0xf7, 0x91, + 0xc9, 0xe3, 0xef, 0xd3, 0x40, 0x67, 0xf1, 0xec, 0x10, 0xf7, 0xa8, 0x5d, + 0x12, 0xdf, 0x84, 0xbd, 0x2c, 0xb5, 0xea, 0x23, 0xf2, 0x49, 0xe9, 0xb3, + 0x3e, 0x9e, 0x93, 0xfc, 0xb5, 0x64, 0xca, 0x47, 0x25, 0x7d, 0x7e, 0x3a, + 0x1d, 0x12, 0xeb, 0xbc, 0xef, 0x67, 0x1f, 0x9d, 0x9e, 0x57, 0x7c, 0x7e, + 0xf4, 0xfc, 0xba, 0xea, 0x44, 0xdb, 0x08, 0xda, 0x71, 0x1c, 0xa6, 0xe4, + 0x4a, 0x7f, 0xf7, 0x66, 0x8e, 0x79, 0xde, 0xa4, 0xce, 0xe1, 0x4a, 0x9a, + 0xf3, 0xaa, 0xc5, 0xcf, 0x1d, 0x29, 0x45, 0x3b, 0xf0, 0xad, 0xa4, 0xb9, + 0xae, 0x8e, 0x62, 0x3c, 0x2c, 0x1f, 0xa2, 0x4e, 0xc4, 0xb6, 0x85, 0xef, + 0xb7, 0xa6, 0xd6, 0x54, 0x32, 0x3e, 0xa4, 0xac, 0x74, 0x11, 0xbf, 0x36, + 0xa5, 0xcf, 0x1e, 0x63, 0x71, 0x05, 0xdd, 0xc5, 0x9c, 0xec, 0xe3, 0x9e, + 0x37, 0x65, 0xb3, 0x3e, 0x69, 0x46, 0x14, 0xe3, 0x26, 0x5d, 0xfa, 0x8c, + 0xf2, 0xd2, 0xe1, 0xa4, 0x79, 0x5c, 0x1d, 0x0c, 0xee, 0x53, 0xc0, 0xcc, + 0xdd, 0xf7, 0x9d, 0x5d, 0x53, 0xa6, 0x5c, 0x2e, 0x25, 0xe3, 0xb3, 0xca, + 0xca, 0xe3, 0x9d, 0xf9, 0x09, 0x45, 0xdc, 0x48, 0x9a, 0x5d, 0x8a, 0xb1, + 0xcd, 0x0e, 0x3d, 0xef, 0x29, 0xf4, 0x4f, 0xaa, 0xb6, 0x60, 0x3c, 0xdc, + 0xaf, 0xcb, 0xfd, 0xbe, 0xce, 0x10, 0x73, 0x06, 0x8c, 0x99, 0x45, 0xe6, + 0x83, 0xe9, 0x3c, 0x84, 0x74, 0x62, 0x8c, 0xf7, 0x86, 0x3c, 0x38, 0xf9, + 0x0f, 0xd4, 0xa1, 0x5c, 0x65, 0x9d, 0x13, 0xe8, 0xdb, 0x31, 0xcd, 0x9f, + 0x1f, 0x9c, 0x2c, 0xe8, 0xfc, 0xc4, 0x1d, 0x95, 0x08, 0xe6, 0xbd, 0xbb, + 0x67, 0xf1, 0x8c, 0xfb, 0x05, 0xbe, 0x67, 0x31, 0x34, 0xde, 0x21, 0xcc, + 0x07, 0xcd, 0x55, 0x5a, 0xb2, 0xc1, 0xd8, 0x00, 0xcf, 0xf7, 0x5b, 0x67, + 0xe5, 0x17, 0xc4, 0x18, 0xeb, 0xdc, 0x23, 0x27, 0xe0, 0x9d, 0xe0, 0xab, + 0x75, 0xbc, 0xa7, 0xb8, 0x2c, 0x05, 0xbf, 0xbf, 0x74, 0x32, 0xff, 0xb4, + 0x58, 0xff, 0xbc, 0x77, 0xf8, 0x36, 0x30, 0x87, 0xfb, 0x07, 0x27, 0x29, + 0x9f, 0x5c, 0x9b, 0xb8, 0x9a, 0xbc, 0xc2, 0xf1, 0x0c, 0x4a, 0x6e, 0x19, + 0xdc, 0x08, 0xbf, 0xf9, 0x65, 0x7f, 0xdf, 0xd6, 0xc1, 0xb3, 0x73, 0x25, + 0x53, 0xeb, 0xeb, 0xac, 0xcb, 0xb3, 0x0f, 0xe8, 0x8a, 0xce, 0x7b, 0x62, + 0x5f, 0xe6, 0x0a, 0x1e, 0xa1, 0x7d, 0x74, 0x6a, 0x12, 0x45, 0x5b, 0x72, + 0x56, 0xd6, 0x83, 0xbf, 0xc3, 0x66, 0x16, 0x5f, 0x8d, 0x08, 0x30, 0x39, + 0x15, 0x0f, 0x1d, 0x90, 0x79, 0xd7, 0x95, 0x46, 0xf3, 0x84, 0x5c, 0x6b, + 0x3a, 0xfa, 0x19, 0xed, 0xd9, 0xc2, 0x6b, 0xfa, 0x5c, 0x3a, 0xfe, 0xa1, + 0xb2, 0x9c, 0xab, 0xf0, 0x6b, 0xbe, 0x7b, 0x8c, 0x79, 0xc2, 0xe1, 0x81, + 0x87, 0x79, 0x70, 0xc0, 0x0e, 0x70, 0x8e, 0xb7, 0xc0, 0x39, 0xde, 0x04, + 0xe7, 0xf8, 0x25, 0x38, 0xf6, 0x8d, 0xca, 0x54, 0x80, 0xff, 0xd3, 0xc0, + 0x21, 0xda, 0x6a, 0xeb, 0x2c, 0xf6, 0x74, 0xba, 0x00, 0x19, 0xfc, 0x00, + 0xfe, 0xc7, 0x56, 0x25, 0x23, 0x1b, 0xab, 0x93, 0xb2, 0xb9, 0xea, 0xe7, + 0x1c, 0xbf, 0xcb, 0x3c, 0xad, 0x51, 0xee, 0x93, 0x03, 0x1c, 0xda, 0x27, + 0x89, 0xe3, 0xc4, 0x8f, 0x4e, 0x59, 0x2b, 0xaf, 0x69, 0x1c, 0x5a, 0x2b, + 0xb3, 0x1c, 0x12, 0x9d, 0xf3, 0x75, 0x66, 0x5b, 0x6a, 0xee, 0x16, 0xea, + 0xbb, 0x99, 0xdb, 0x15, 0xc4, 0xd6, 0x89, 0x97, 0x7f, 0x0e, 0xf6, 0x5e, + 0xe9, 0x5c, 0xb8, 0x19, 0xf3, 0x00, 0xda, 0xb5, 0xb0, 0x6b, 0xc8, 0x3f, + 0x27, 0x57, 0x7f, 0x41, 0x1b, 0x7c, 0x03, 0x9c, 0xf1, 0x2a, 0x6c, 0xc8, + 0x8e, 0x73, 0x40, 0x73, 0xbf, 0x1d, 0xe7, 0x88, 0xce, 0xad, 0xe5, 0x7b, + 0x8a, 0x65, 0x5b, 0xe6, 0xca, 0x56, 0xbc, 0x00, 0xf9, 0xbb, 0x06, 0xbf, + 0x6d, 0x03, 0x7b, 0xb0, 0x89, 0xb5, 0xd8, 0x6a, 0xd2, 0xce, 0xbf, 0xaf, + 0xb1, 0x77, 0xad, 0xf9, 0x27, 0xbc, 0xc7, 0x3a, 0x9b, 0x96, 0x3f, 0xf6, + 0x13, 0x03, 0x99, 0x8f, 0x97, 0xd5, 0xfd, 0xfd, 0x7e, 0x1b, 0x68, 0xbb, + 0xd9, 0x24, 0x1e, 0x8b, 0x5c, 0x2c, 0xd9, 0xb0, 0x25, 0x17, 0x63, 0xe4, + 0x00, 0x55, 0xd5, 0xea, 0xe7, 0x05, 0x63, 0xf6, 0xbc, 0xfd, 0x36, 0xc7, + 0xe5, 0x04, 0xb8, 0x4d, 0xdb, 0xbf, 0xad, 0xb9, 0x4d, 0xa9, 0xf2, 0xbc, + 0x5c, 0x5f, 0x4d, 0x05, 0x1c, 0x27, 0x2f, 0x6f, 0x80, 0xe3, 0x35, 0x2b, + 0xad, 0x1c, 0xed, 0x71, 0xac, 0x53, 0x45, 0xcd, 0x2d, 0x75, 0xc9, 0xa5, + 0x95, 0xa2, 0xba, 0xbc, 0x52, 0x52, 0xaf, 0x2c, 0x95, 0x55, 0x71, 0xc9, + 0xf3, 0xfe, 0xe9, 0xce, 0xc8, 0xdb, 0xab, 0x9e, 0x9c, 0x76, 0x8d, 0x81, + 0x90, 0xb4, 0xf2, 0xdf, 0x3c, 0xaf, 0x13, 0xd8, 0xbc, 0x75, 0xd8, 0xf3, + 0x9e, 0x18, 0x1d, 0x15, 0xe7, 0x30, 0x39, 0xca, 0x70, 0x8c, 0x39, 0xac, + 0xc4, 0x9c, 0x8c, 0x6d, 0x9f, 0xaf, 0x29, 0x05, 0x7c, 0x3b, 0xe0, 0xf3, + 0x97, 0x27, 0xbb, 0x83, 0x33, 0x8f, 0xb3, 0x2f, 0x31, 0x26, 0x1c, 0xfb, + 0xaf, 0x98, 0xb0, 0x29, 0xe7, 0xca, 0x58, 0x88, 0xae, 0xa8, 0x7c, 0xaf, + 0x1c, 0x79, 0xac, 0x6c, 0xe2, 0xea, 0x18, 0xc5, 0xf2, 0x7d, 0x6f, 0x48, + 0xc7, 0xfe, 0xc1, 0x49, 0x4c, 0xcf, 0x9b, 0x75, 0xf9, 0xbd, 0x03, 0x8c, + 0xc9, 0x98, 0xdd, 0xb0, 0xff, 0xa7, 0xb5, 0x7d, 0xae, 0xaa, 0x8c, 0x4d, + 0xfd, 0x8e, 0xca, 0x44, 0x19, 0x36, 0x5e, 0x31, 0x2f, 0x94, 0x5c, 0xc1, + 0x8a, 0xcd, 0x02, 0x3b, 0x66, 0x80, 0x37, 0x4f, 0xeb, 0xb3, 0xd1, 0x43, + 0x1a, 0x7b, 0xe6, 0x58, 0xce, 0x4b, 0xba, 0xe6, 0xf6, 0xea, 0xf5, 0xbb, + 0x7d, 0xad, 0x18, 0xf3, 0xf7, 0x1c, 0x7a, 0x9c, 0xe7, 0xf9, 0x40, 0xaf, + 0x64, 0xd7, 0xcf, 0x40, 0x27, 0x62, 0x58, 0xdb, 0xb0, 0xd6, 0x87, 0x1d, + 0xd8, 0xef, 0x1d, 0x27, 0x1c, 0x60, 0x6a, 0x27, 0xee, 0xd9, 0x6e, 0x12, + 0xfd, 0x3a, 0x24, 0xb3, 0xd4, 0xae, 0x71, 0xf5, 0xd1, 0xba, 0x34, 0x78, + 0x48, 0x0e, 0xe5, 0x10, 0xea, 0xe2, 0x41, 0x99, 0xdc, 0x6b, 0x1a, 0xe5, + 0x36, 0x5c, 0xd9, 0xe6, 0x28, 0x78, 0x05, 0xae, 0xbf, 0xc0, 0xfb, 0x46, + 0x31, 0xe6, 0xbc, 0x29, 0xef, 0x9d, 0xa4, 0x2d, 0x71, 0x0c, 0xe6, 0x1a, + 0xcf, 0xda, 0xb8, 0x36, 0xca, 0x2a, 0xbb, 0xc8, 0x32, 0xae, 0x55, 0xff, + 0xf9, 0x23, 0x98, 0x84, 0x3e, 0x99, 0x15, 0x1f, 0x93, 0xde, 0xdb, 0xc5, + 0x24, 0xd6, 0x75, 0xc8, 0xc4, 0x52, 0x5c, 0x9d, 0xba, 0x62, 0x42, 0xde, + 0xba, 0x24, 0xbb, 0x12, 0xd5, 0x7c, 0xb4, 0x06, 0x59, 0x5c, 0x87, 0x5c, + 0xad, 0x41, 0xa6, 0x32, 0x65, 0x2b, 0x35, 0xad, 0xe2, 0x3a, 0x2e, 0x30, + 0x05, 0x79, 0x0d, 0xbf, 0x4a, 0x2e, 0x4a, 0xfd, 0x75, 0xd0, 0x46, 0x68, + 0x47, 0xd3, 0x61, 0x65, 0x43, 0x0e, 0x21, 0x97, 0x65, 0x5f, 0x7f, 0xdf, + 0x51, 0x1a, 0x57, 0x53, 0x77, 0x24, 0xe9, 0xdc, 0x11, 0xcb, 0xdd, 0xc1, + 0xef, 0x37, 0xe2, 0xca, 0x55, 0xe8, 0xfb, 0xeb, 0xf8, 0x4e, 0xf8, 0x35, + 0x43, 0x8e, 0x0d, 0x6b, 0x9d, 0x4e, 0x49, 0xc8, 0x72, 0x36, 0xc5, 0xd7, + 0xf1, 0x75, 0xad, 0xe3, 0x90, 0x37, 0x60, 0x90, 0xaf, 0xd3, 0xe9, 0x40, + 0x46, 0xbf, 0x01, 0xfd, 0xb5, 0xe0, 0x95, 0xc5, 0x65, 0x1e, 0xfa, 0x7f, + 0x15, 0xcf, 0x6f, 0x36, 0x3f, 0x56, 0x73, 0x8b, 0x2a, 0xc8, 0x3f, 0x79, + 0x0e, 0x3c, 0xf9, 0xf7, 0x58, 0xbb, 0x1e, 0xcd, 0xdd, 0x13, 0xa3, 0x3c, + 0x07, 0xfb, 0xb7, 0xba, 0x64, 0x1f, 0x97, 0xdb, 0x23, 0x27, 0x50, 0xee, + 0xc6, 0xd5, 0xc0, 0x3a, 0x44, 0xf4, 0xf9, 0xf5, 0x5a, 0x69, 0xc4, 0x28, + 0xea, 0x33, 0xe6, 0x31, 0xf4, 0x25, 0x96, 0x1d, 0xc6, 0x73, 0xc6, 0x65, + 0x38, 0x37, 0x70, 0x26, 0x15, 0xd3, 0x39, 0xa1, 0x35, 0x70, 0x89, 0x75, + 0xbc, 0xef, 0x16, 0xe3, 0x7a, 0x0d, 0xe8, 0xf0, 0xc8, 0x67, 0x5e, 0x3a, + 0xca, 0xbc, 0xf3, 0xf7, 0x63, 0xbe, 0xfd, 0xfb, 0xc4, 0xbb, 0x6d, 0xcf, + 0xa5, 0x0c, 0xdc, 0x7c, 0x60, 0x02, 0xef, 0xc8, 0xdb, 0x61, 0x8b, 0xaa, + 0x5a, 0x7e, 0xd9, 0xce, 0xef, 0x5b, 0x6c, 0x24, 0xcd, 0x77, 0xc5, 0xef, + 0x3b, 0x6f, 0xd3, 0xee, 0x74, 0x00, 0x5f, 0xe2, 0x9a, 0x57, 0xde, 0xb2, + 0x0b, 0x40, 0x05, 0x2b, 0x3e, 0x05, 0x19, 0x6d, 0x17, 0xcb, 0xc9, 0xc9, + 0xc3, 0xef, 0xce, 0xea, 0xbe, 0x6c, 0xdb, 0xea, 0xdb, 0xfa, 0x2e, 0xc7, + 0xcf, 0xb9, 0x70, 0x0e, 0xf0, 0x6d, 0x4c, 0x53, 0xcb, 0xe8, 0x4e, 0xc3, + 0x18, 0xf0, 0x65, 0xb4, 0x35, 0x8f, 0xe8, 0xff, 0x99, 0x07, 0xe5, 0x64, + 0xc4, 0xf0, 0xcf, 0xdb, 0x71, 0x6d, 0x70, 0x3d, 0x3f, 0x06, 0xbf, 0xdf, + 0x2b, 0x3f, 0xad, 0x38, 0xa3, 0x2f, 0x3f, 0x4f, 0xec, 0xca, 0x0f, 0x7d, + 0xd4, 0x2e, 0xc9, 0xad, 0xd8, 0x32, 0x59, 0xd6, 0xfb, 0x0d, 0xae, 0xc9, + 0xf8, 0xd1, 0x09, 0xc8, 0x0d, 0x65, 0x9d, 0xba, 0x65, 0x4a, 0x15, 0x72, + 0x54, 0x05, 0x3e, 0x55, 0x21, 0x53, 0xe4, 0x40, 0x55, 0xe0, 0x5b, 0xb5, + 0x69, 0x39, 0x75, 0xcc, 0x99, 0x36, 0x7b, 0x1d, 0x72, 0x74, 0xb5, 0xc9, + 0xfd, 0xd7, 0x63, 0x36, 0x69, 0x07, 0x6f, 0xee, 0xee, 0xfd, 0xa7, 0xd8, + 0xfb, 0x23, 0x72, 0x0d, 0x7e, 0xcb, 0xf5, 0xca, 0x08, 0x30, 0x49, 0x80, + 0x51, 0x2e, 0x64, 0x23, 0x25, 0x1b, 0x95, 0x71, 0xd9, 0x84, 0x7d, 0xda, + 0x5a, 0x4d, 0x80, 0x4f, 0x03, 0x47, 0xaf, 0x1c, 0x93, 0x37, 0x56, 0x95, + 0xcc, 0xd8, 0xb0, 0x33, 0x6b, 0x8c, 0xc1, 0x43, 0x9e, 0xab, 0x5d, 0xfa, + 0xbc, 0x7d, 0xa2, 0xee, 0xc7, 0xe2, 0x73, 0xf5, 0x1e, 0x99, 0xac, 0x9b, + 0xf2, 0x54, 0xbd, 0x57, 0xbe, 0x5a, 0x8f, 0xca, 0xe9, 0x46, 0x4c, 0xbe, + 0x56, 0x1f, 0x94, 0xa7, 0xeb, 0x47, 0xe4, 0x99, 0x46, 0x5c, 0xbe, 0x0e, + 0xbf, 0x30, 0xdf, 0x70, 0x64, 0xaa, 0x31, 0x22, 0xa7, 0x1a, 0x8c, 0xb1, + 0xe3, 0x7b, 0xf8, 0x65, 0x77, 0x63, 0x17, 0x1c, 0x57, 0x27, 0xc6, 0xe5, + 0xa8, 0x9c, 0x3e, 0x6f, 0x94, 0xbc, 0x1f, 0xff, 0x10, 0x79, 0x01, 0x7d, + 0x17, 0xae, 0x28, 0xa9, 0xe9, 0xef, 0xb7, 0xfe, 0x47, 0x24, 0xa2, 0x7d, + 0xa3, 0x17, 0xaa, 0x83, 0x68, 0x63, 0xd3, 0x27, 0x09, 0xe2, 0x20, 0xad, + 0xf8, 0x7f, 0xcb, 0xf7, 0x32, 0x74, 0x0c, 0xfb, 0x26, 0x7d, 0x2f, 0xbd, + 0xf6, 0xc4, 0x0f, 0xfa, 0x39, 0xf4, 0xb5, 0xf6, 0x9e, 0x51, 0xb4, 0xbe, + 0xbb, 0x90, 0x7f, 0xf4, 0x7f, 0x51, 0xfc, 0xb3, 0xa6, 0x73, 0x8d, 0x41, + 0xfe, 0x4f, 0x0a, 0xc6, 0xf2, 0xf9, 0xf9, 0xdd, 0x93, 0x95, 0x09, 0xf5, + 0x54, 0x85, 0x8c, 0xc6, 0x93, 0x85, 0xdd, 0x3c, 0xba, 0xaf, 0xc8, 0x9a, + 0x1b, 0xd1, 0x63, 0xf0, 0xe3, 0xf6, 0x69, 0x9d, 0x53, 0x37, 0x31, 0x4c, + 0xf9, 0xe3, 0x19, 0x5a, 0x4f, 0x70, 0xb6, 0x00, 0x6e, 0xeb, 0x9a, 0x72, + 0xb1, 0xee, 0xc7, 0xaf, 0xe6, 0xb4, 0xbc, 0x5c, 0x87, 0xcc, 0xf1, 0xfc, + 0xc1, 0xbf, 0x16, 0xaa, 0x7e, 0xdf, 0xec, 0xb0, 0x43, 0x7f, 0x1c, 0xf3, + 0x35, 0x7a, 0xf9, 0x2d, 0xfe, 0x4f, 0x0e, 0xca, 0xc1, 0x78, 0x99, 0x0f, + 0x6c, 0x6b, 0x59, 0xf4, 0xcf, 0x67, 0x1d, 0x79, 0x11, 0x7b, 0x51, 0x33, + 0x39, 0xfe, 0x4e, 0xa9, 0x39, 0xf4, 0x6d, 0x89, 0xdf, 0xc3, 0x52, 0xc5, + 0x77, 0x6a, 0x4e, 0x2b, 0x36, 0xe6, 0xe3, 0x6c, 0xcd, 0x7c, 0xf8, 0xdd, + 0xe9, 0xea, 0x41, 0xdc, 0xa3, 0xce, 0x01, 0x67, 0x3a, 0xc3, 0xfb, 0x05, + 0x94, 0x19, 0x1b, 0x99, 0xc3, 0x35, 0x16, 0xd4, 0xfd, 0x7c, 0x40, 0x73, + 0xf5, 0xf1, 0x87, 0xfd, 0x66, 0xaa, 0x56, 0x21, 0x13, 0xba, 0xab, 0x8c, + 0x9f, 0xad, 0x0f, 0x10, 0x73, 0x0f, 0xda, 0xfc, 0x45, 0xe4, 0x6f, 0xa6, + 0x8e, 0x29, 0x04, 0xcf, 0xf6, 0xc9, 0xb3, 0x26, 0x73, 0xcd, 0xd3, 0x6a, + 0xa2, 0xf2, 0x72, 0x90, 0x57, 0x7b, 0x57, 0x1d, 0xac, 0x35, 0x07, 0xfc, + 0xbc, 0x74, 0xbe, 0x7b, 0x6f, 0x2e, 0xfa, 0x5e, 0x39, 0x61, 0x4e, 0x7a, + 0x07, 0x78, 0xab, 0x36, 0x62, 0xd0, 0x41, 0xe0, 0x9d, 0xdd, 0xa6, 0xf5, + 0xb1, 0xd8, 0xf8, 0x97, 0xb7, 0xad, 0xf5, 0xb9, 0x15, 0x63, 0xb8, 0x35, + 0x40, 0xdf, 0x96, 0xb8, 0x71, 0xd1, 0x8f, 0x1b, 0x69, 0x1f, 0x1a, 0x58, + 0x81, 0x3a, 0xea, 0x2a, 0xf4, 0x64, 0xb7, 0x2d, 0xff, 0xfe, 0x03, 0x7d, + 0xe7, 0x95, 0xf0, 0x2c, 0x67, 0x00, 0x00, 0x00 }; static u32 bnx2_RXP_b06FwData[(0x0/4) + 1] = { 0x0 }; -static u32 bnx2_RXP_b06FwRodata[(0x28/4) + 1] = { - 0x0800468c, 0x0800458c, 0x08004630, 0x08004648, 0x08004660, 0x08004680, - 0x0800468c, 0x0800468c, 0x08004594, 0x00000000, 0x00000000 }; -static u32 bnx2_RXP_b06FwBss[(0x13a4/4) + 1] = { 0x0 }; -static u32 bnx2_RXP_b06FwSbss[(0x1c/4) + 1] = { 0x0 }; +static u32 bnx2_RXP_b06FwRodata[(0x278/4) + 1] = { + 0x08003fdc, 0x08003edc, 0x08003f80, 0x08003f98, 0x08003fb0, 0x08003fd0, + 0x08003fdc, 0x08003fdc, 0x08003ee4, 0x00000000, 0x08004a04, 0x08004a3c, + 0x08004c38, 0x08004c38, 0x08004c38, 0x08004c38, 0x08004a74, 0x08004c38, + 0x08004b80, 0x08004bb8, 0x08004c38, 0x08004b08, 0x08004c38, 0x08004c38, + 0x08004bb8, 0x08004c38, 0x08004c38, 0x08004c38, 0x08004c38, 0x08004c38, + 0x08004c38, 0x08004c38, 0x08004c38, 0x08004c38, 0x08004c38, 0x08004bf8, + 0x08004c38, 0x08004bf8, 0x08004b80, 0x08004c38, 0x08004c38, 0x08004bf8, + 0x08004bf8, 0x08004c38, 0x08004c38, 0x08004c38, 0x08004c38, 0x08004c38, + 0x08004c38, 0x08004c38, 0x08004c38, 0x08004c38, 0x08004c38, 0x08004c38, + 0x08004c38, 0x08004c38, 0x08004c38, 0x08004c38, 0x08004c38, 0x08004c38, + 0x08004c38, 0x08004c38, 0x08004c38, 0x08004c38, 0x08004c38, 0x08004c38, + 0x08004c38, 0x08004c38, 0x08004c38, 0x08004c38, 0x08004c38, 0x08004c38, + 0x08004c38, 0x08004c38, 0x08004c38, 0x08004c38, 0x08004c38, 0x08004c38, + 0x08004c38, 0x08004c38, 0x08004c38, 0x08004c38, 0x08004c38, 0x08004c38, + 0x08004c38, 0x08004c38, 0x08004c38, 0x08004c38, 0x08004c38, 0x08004c38, + 0x08004c38, 0x08004c38, 0x08004c38, 0x08004c38, 0x08004c38, 0x08004c38, + 0x08004c38, 0x08004c38, 0x08004c38, 0x08004c38, 0x08004c38, 0x08004c38, + 0x08004c38, 0x08004c38, 0x08004c38, 0x08004c38, 0x08004c38, 0x08004c38, + 0x08004c38, 0x08004c38, 0x08004c38, 0x08004c38, 0x08004c38, 0x08004c38, + 0x08004c38, 0x08004c38, 0x08004c38, 0x08004c38, 0x08004c38, 0x08004c38, + 0x08004c38, 0x08004c38, 0x08004c38, 0x08004c38, 0x08004c38, 0x08004c38, + 0x08004c38, 0x08004c38, 0x08004c38, 0x08004c38, 0x08004c38, 0x08004c38, + 0x08004c38, 0x08004c38, 0x08004c38, 0x08004c38, 0x08004c38, 0x08004c38, + 0x08004ae4, 0x00000000, 0x08006018, 0x08006030, 0x08006030, 0x08006030, + 0x08006018, 0x08006030, 0x08006030, 0x08006030, 0x08006018, 0x08006030, + 0x08006030, 0x08006030, 0x08006018, 0x08006030, 0x08006030, 0x08006030, + 0x08006024, 0x00000000, 0x00000000 }; + +static u32 bnx2_RXP_b06FwBss[(0x13dc/4) + 1] = { 0x0 }; +static u32 bnx2_RXP_b06FwSbss[(0x2c/4) + 1] = { 0x0 }; + +static struct fw_info bnx2_rxp_fw_06 = { + .ver_major = 0x2, + .ver_minor = 0x8, + .ver_fix = 0x17, + + .start_addr = 0x08003184, + + .text_addr = 0x08000000, + .text_len = 0x6728, + .text_index = 0x0, + .gz_text = bnx2_RXP_b06FwText, + .gz_text_len = sizeof(bnx2_RXP_b06FwText), + + .data_addr = 0x080069c0, + .data_len = 0x0, + .data_index = 0x0, + .data = bnx2_RXP_b06FwData, + + .sbss_addr = 0x080069c0, + .sbss_len = 0x2c, + .sbss_index = 0x0, + .sbss = bnx2_RXP_b06FwSbss, + + .bss_addr = 0x080069f0, + .bss_len = 0x13dc, + .bss_index = 0x0, + .bss = bnx2_RXP_b06FwBss, + + .rodata_addr = 0x08006728, + .rodata_len = 0x278, + .rodata_index = 0x0, + .rodata = bnx2_RXP_b06FwRodata, +}; static u8 bnx2_rv2p_proc1[] = { 0x1f, 0x8b, 0x08, 0x08, 0x5e, 0xd0, 0x41, 0x44, 0x00, 0x03, 0x74, 0x65, @@ -1316,20 +1665,6 @@ static u8 bnx2_rv2p_proc2[] = { 0x63, 0xd6, 0x11, 0x8f, 0x47, 0xd5, 0x5f, 0x3f, 0x97, 0x8f, 0x31, 0xd8, 0x17, 0x00, 0x00, 0x00 }; -static const int bnx2_TPAT_b06FwReleaseMajor = 0x1; -static const int bnx2_TPAT_b06FwReleaseMinor = 0x0; -static const int bnx2_TPAT_b06FwReleaseFix = 0x0; -static const u32 bnx2_TPAT_b06FwStartAddr = 0x08000860; -static const u32 bnx2_TPAT_b06FwTextAddr = 0x08000800; -static const int bnx2_TPAT_b06FwTextLen = 0x122c; -static const u32 bnx2_TPAT_b06FwDataAddr = 0x08001a60; -static const int bnx2_TPAT_b06FwDataLen = 0x0; -static const u32 bnx2_TPAT_b06FwRodataAddr = 0x00000000; -static const int bnx2_TPAT_b06FwRodataLen = 0x0; -static const u32 bnx2_TPAT_b06FwBssAddr = 0x08001aa0; -static const int bnx2_TPAT_b06FwBssLen = 0x250; -static const u32 bnx2_TPAT_b06FwSbssAddr = 0x08001a60; -static const int bnx2_TPAT_b06FwSbssLen = 0x34; static u8 bnx2_TPAT_b06FwText[] = { 0x1f, 0x8b, 0x08, 0x08, 0x47, 0xd2, 0x41, 0x44, 0x00, 0x03, 0x74, 0x65, 0x73, 0x74, 0x31, 0x2e, 0x62, 0x69, 0x6e, 0x00, 0xc5, 0x57, 0x4d, 0x68, @@ -1529,20 +1864,40 @@ static u32 bnx2_TPAT_b06FwRodata[(0x0/4) + 1] = { 0x0 }; static u32 bnx2_TPAT_b06FwBss[(0x250/4) + 1] = { 0x0 }; static u32 bnx2_TPAT_b06FwSbss[(0x34/4) + 1] = { 0x0 }; -static const int bnx2_TXP_b06FwReleaseMajor = 0x1; -static const int bnx2_TXP_b06FwReleaseMinor = 0x0; -static const int bnx2_TXP_b06FwReleaseFix = 0x0; -static const u32 bnx2_TXP_b06FwStartAddr = 0x080034b0; -static const u32 bnx2_TXP_b06FwTextAddr = 0x08000000; -static const int bnx2_TXP_b06FwTextLen = 0x5748; -static const u32 bnx2_TXP_b06FwDataAddr = 0x08005760; -static const int bnx2_TXP_b06FwDataLen = 0x0; -static const u32 bnx2_TXP_b06FwRodataAddr = 0x00000000; -static const int bnx2_TXP_b06FwRodataLen = 0x0; -static const u32 bnx2_TXP_b06FwBssAddr = 0x080057a0; -static const int bnx2_TXP_b06FwBssLen = 0x1c4; -static const u32 bnx2_TXP_b06FwSbssAddr = 0x08005760; -static const int bnx2_TXP_b06FwSbssLen = 0x38; +static struct fw_info bnx2_tpat_fw_06 = { + .ver_major = 0x1, + .ver_minor = 0x0, + .ver_fix = 0x0, + + .start_addr = 0x08000860, + + .text_addr = 0x08000800, + .text_len = 0x122c, + .text_index = 0x0, + .gz_text = bnx2_TPAT_b06FwText, + .gz_text_len = sizeof(bnx2_TPAT_b06FwText), + + .data_addr = 0x08001a60, + .data_len = 0x0, + .data_index = 0x0, + .data = bnx2_TPAT_b06FwData, + + .sbss_addr = 0x08001a60, + .sbss_len = 0x34, + .sbss_index = 0x0, + .sbss = bnx2_TPAT_b06FwSbss, + + .bss_addr = 0x08001aa0, + .bss_len = 0x250, + .bss_index = 0x0, + .bss = bnx2_TPAT_b06FwBss, + + .rodata_addr = 0x00000000, + .rodata_len = 0x0, + .rodata_index = 0x0, + .rodata = bnx2_TPAT_b06FwRodata, +}; + static u8 bnx2_TXP_b06FwText[] = { 0x1f, 0x8b, 0x08, 0x08, 0x21, 0xd3, 0x41, 0x44, 0x00, 0x03, 0x74, 0x65, 0x73, 0x74, 0x31, 0x2e, 0x62, 0x69, 0x6e, 0x00, 0xed, 0x5c, 0x6d, 0x6c, @@ -1964,3 +2319,38 @@ static u32 bnx2_TXP_b06FwData[(0x0/4) + 1] = { 0x0 }; static u32 bnx2_TXP_b06FwRodata[(0x0/4) + 1] = { 0x0 }; static u32 bnx2_TXP_b06FwBss[(0x1c4/4) + 1] = { 0x0 }; static u32 bnx2_TXP_b06FwSbss[(0x38/4) + 1] = { 0x0 }; + +static struct fw_info bnx2_txp_fw_06 = { + .ver_major = 0x1, + .ver_minor = 0x0, + .ver_fix = 0x0, + + .start_addr = 0x080034b0, + + .text_addr = 0x08000000, + .text_len = 0x5748, + .text_index = 0x0, + .gz_text = bnx2_TXP_b06FwText, + .gz_text_len = sizeof(bnx2_TXP_b06FwText), + + .data_addr = 0x08005760, + .data_len = 0x0, + .data_index = 0x0, + .data = bnx2_TXP_b06FwData, + + .sbss_addr = 0x08005760, + .sbss_len = 0x38, + .sbss_index = 0x0, + .sbss = bnx2_TXP_b06FwSbss, + + .bss_addr = 0x080057a0, + .bss_len = 0x1c4, + .bss_index = 0x0, + .bss = bnx2_TXP_b06FwBss, + + .rodata_addr = 0x00000000, + .rodata_len = 0x0, + .rodata_index = 0x0, + .rodata = bnx2_TXP_b06FwRodata, +}; + diff --git a/drivers/net/bnx2_fw2.h b/drivers/net/bnx2_fw2.h new file mode 100644 index 00000000000..680c769a3fc --- /dev/null +++ b/drivers/net/bnx2_fw2.h @@ -0,0 +1,4086 @@ +/* bnx2_fw2.h: Broadcom NX2 network driver. + * + * Copyright (c) 2006 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, except as noted below. + * + * This file contains firmware data derived from proprietary unpublished + * source code, Copyright (c) 2006 Broadcom Corporation. + * + * Permission is hereby granted for the distribution of this firmware data + * in hexadecimal or equivalent format, provided this copyright notice is + * accompanying it. + */ + +static u8 bnx2_COM_b09FwText[] = { + 0x1f, 0x8b, 0x08, 0x08, 0xac, 0xfb, 0x2f, 0x45, 0x00, 0x03, 0x74, 0x65, + 0x73, 0x74, 0x31, 0x2e, 0x62, 0x69, 0x6e, 0x00, 0xdc, 0x5b, 0x6b, 0x70, + 0x1b, 0xd7, 0x75, 0x3e, 0xfb, 0x00, 0x09, 0x91, 0x10, 0xb5, 0xa4, 0x60, + 0x1a, 0x96, 0x68, 0x07, 0x20, 0x57, 0x22, 0x6a, 0xb1, 0x29, 0x4c, 0x33, + 0x16, 0x9b, 0xc2, 0x12, 0x02, 0x50, 0xae, 0x26, 0xc3, 0x3a, 0x94, 0xcd, + 0xd8, 0x4a, 0xaa, 0xc9, 0x30, 0x00, 0xa5, 0xf4, 0x61, 0xb7, 0x92, 0xab, + 0xa9, 0x5d, 0xd7, 0xaa, 0x21, 0x92, 0x6a, 0xf5, 0x83, 0xe5, 0x2a, 0x16, + 0x43, 0xa9, 0xd3, 0x74, 0xc2, 0x12, 0x56, 0xac, 0x4e, 0x31, 0x85, 0xfc, + 0xd6, 0x38, 0xb1, 0xc9, 0x4a, 0x76, 0xeb, 0xf4, 0xe1, 0xa6, 0x33, 0xcd, + 0xa3, 0x9d, 0x36, 0xf6, 0xa8, 0x3f, 0xea, 0xe9, 0xd3, 0x33, 0x6e, 0xa7, + 0xea, 0xd8, 0x0e, 0xfa, 0x7d, 0x77, 0x77, 0x81, 0x25, 0x48, 0xbd, 0xfc, + 0xc8, 0x8f, 0x70, 0x06, 0xb3, 0x7b, 0xef, 0xde, 0xbd, 0xf7, 0xdc, 0xf3, + 0xf8, 0xce, 0x63, 0x2f, 0xfb, 0x44, 0x5a, 0xc4, 0xfb, 0x5b, 0x8b, 0x5f, + 0xfc, 0xfe, 0x5f, 0x2d, 0x7c, 0x7c, 0xf0, 0xe3, 0xfd, 0x22, 0xb7, 0xdc, + 0xa2, 0xb7, 0x86, 0x75, 0xf6, 0x1b, 0xf8, 0x45, 0xf1, 0xeb, 0xf7, 0xee, + 0x57, 0xfb, 0xb3, 0xf0, 0x7b, 0x13, 0x0f, 0xc7, 0xfe, 0x55, 0x44, 0xbb, + 0xc4, 0x98, 0xe0, 0x5f, 0xb5, 0x7a, 0xf9, 0xe7, 0x5c, 0x38, 0x7e, 0x89, + 0x67, 0x86, 0xbb, 0x9c, 0xa2, 0x97, 0x3f, 0x09, 0xeb, 0x69, 0x39, 0x94, + 0xb5, 0x25, 0x6c, 0xa4, 0xdf, 0x3c, 0x54, 0xb0, 0x45, 0x32, 0xe5, 0x2d, + 0xf1, 0x9c, 0xbc, 0x57, 0x2d, 0x46, 0x4d, 0x61, 0xff, 0x8d, 0xe9, 0x77, + 0xbf, 0xf6, 0xe2, 0xd6, 0xc4, 0x5b, 0xf3, 0x86, 0x84, 0xad, 0xf4, 0x19, + 0xb1, 0x36, 0x4b, 0xb8, 0x0b, 0xef, 0x7c, 0xb5, 0xf7, 0x3d, 0x91, 0x36, + 0x7f, 0xae, 0x37, 0xab, 0x2f, 0xf6, 0x4a, 0x71, 0x43, 0x3a, 0x2c, 0x7a, + 0x7a, 0xd3, 0xf7, 0xb3, 0x86, 0x35, 0x66, 0xa4, 0x2d, 0x59, 0xac, 0xc8, + 0xc8, 0xde, 0x69, 0x09, 0x87, 0xd3, 0x47, 0x9b, 0x9b, 0x37, 0x49, 0xd8, + 0x4c, 0x8f, 0x1d, 0xfa, 0x6d, 0xfb, 0xd1, 0xaa, 0x6e, 0xdb, 0xc9, 0x05, + 0x89, 0x0c, 0x9e, 0x1a, 0xc0, 0xf3, 0x72, 0x22, 0x29, 0xb2, 0x55, 0x74, + 0xbb, 0x18, 0x31, 0xec, 0xb0, 0x64, 0x2b, 0xb6, 0xe4, 0x2a, 0x22, 0x7f, + 0x5e, 0xd6, 0xe4, 0x94, 0xdd, 0x29, 0x0b, 0x7d, 0xef, 0x56, 0x33, 0xa0, + 0xe5, 0xcf, 0xec, 0xb1, 0x43, 0x53, 0x36, 0xe9, 0x9d, 0x6d, 0x76, 0xe9, + 0x9d, 0x6a, 0x2a, 0xd8, 0xa6, 0x4c, 0x94, 0xd9, 0x37, 0xa2, 0xb3, 0x2f, + 0x94, 0x7e, 0x68, 0xcd, 0x29, 0x3b, 0xe2, 0xf5, 0xed, 0xdc, 0x9e, 0xc5, + 0x7c, 0x93, 0x65, 0x8e, 0x3d, 0x93, 0x2a, 0xd8, 0x51, 0xaf, 0x3f, 0x79, + 0x5b, 0xd6, 0x8e, 0xa1, 0xbf, 0xcb, 0x7b, 0x76, 0xf2, 0xbe, 0x82, 0x6d, + 0x7b, 0xcf, 0xbe, 0x8a, 0xb9, 0x93, 0x5e, 0xff, 0x7d, 0xdb, 0x0a, 0x76, + 0x9f, 0xd7, 0x3f, 0xbd, 0x2d, 0x6b, 0xa7, 0xbc, 0xfe, 0xe4, 0xee, 0x82, + 0x3d, 0xe0, 0xf5, 0x9f, 0xbd, 0x3d, 0x6b, 0x0f, 0x7a, 0xfd, 0x0f, 0x6d, + 0x2d, 0xd8, 0x69, 0xf4, 0x1f, 0x6d, 0xd6, 0x37, 0x59, 0x72, 0xa4, 0x1c, + 0xc7, 0x2f, 0x83, 0x67, 0x43, 0xe8, 0xdb, 0x89, 0xdf, 0x30, 0x7e, 0xbf, + 0xb8, 0x4e, 0xda, 0x46, 0x70, 0xfd, 0xc6, 0x46, 0x97, 0x77, 0xe0, 0x91, + 0x13, 0x96, 0x37, 0x8c, 0x98, 0xbc, 0xd8, 0xfb, 0x06, 0x78, 0x68, 0xc9, + 0x99, 0x8a, 0x68, 0x23, 0xbd, 0x31, 0xf0, 0x2e, 0x2a, 0x4f, 0x56, 0x5a, + 0xc5, 0x78, 0xcc, 0x00, 0x6f, 0x3e, 0x2f, 0xf9, 0x68, 0x58, 0xda, 0xe7, + 0x34, 0xe9, 0xee, 0x0f, 0x4b, 0xc6, 0x52, 0x72, 0x13, 0x7d, 0x26, 0x2a, + 0xc6, 0x5c, 0x66, 0xbd, 0x2e, 0x9b, 0xac, 0x9c, 0x14, 0xc1, 0xbb, 0xef, + 0x51, 0x27, 0xf1, 0x2c, 0x2e, 0xb9, 0xe9, 0x9b, 0x65, 0xcc, 0x22, 0x5d, + 0x3b, 0x6f, 0x74, 0xd7, 0x0a, 0x6b, 0xd9, 0x13, 0x23, 0x72, 0xc4, 0x89, + 0x68, 0xb9, 0x13, 0xdb, 0x24, 0x9b, 0x92, 0x28, 0xde, 0x8b, 0xe5, 0xf1, + 0xa4, 0x54, 0x1e, 0x91, 0x29, 0x47, 0xb4, 0xac, 0x43, 0x7e, 0x76, 0xe2, + 0x79, 0x9b, 0x1a, 0x8b, 0xbe, 0x2e, 0x43, 0xcd, 0x1d, 0x46, 0xbf, 0x85, + 0xfe, 0x0e, 0x6d, 0x48, 0xcd, 0xa1, 0xfa, 0xe3, 0x93, 0x12, 0x91, 0xc7, + 0xcb, 0x51, 0x6f, 0x6c, 0xb5, 0x9a, 0x4d, 0x59, 0x18, 0x37, 0x22, 0x93, + 0x4e, 0x54, 0xc6, 0x70, 0x9d, 0x70, 0xb8, 0x7e, 0x0c, 0x3a, 0xf5, 0xda, + 0xa1, 0xfc, 0xac, 0x9a, 0x2f, 0x6e, 0xa4, 0x39, 0x5f, 0x17, 0xc6, 0x4d, + 0x80, 0x2e, 0x4d, 0x4c, 0x25, 0xcb, 0x8c, 0xe4, 0xa7, 0x35, 0xe8, 0x1b, + 0xae, 0x8a, 0xaf, 0x43, 0xa0, 0xdf, 0x14, 0xbb, 0x5f, 0x93, 0x02, 0x64, + 0x55, 0xb4, 0xd0, 0x2e, 0x9f, 0xd5, 0xb3, 0x4e, 0xb3, 0xe4, 0xcc, 0xb8, + 0x18, 0x33, 0x4a, 0x97, 0x64, 0x12, 0xef, 0xe8, 0x36, 0xc7, 0x5c, 0xc4, + 0xbe, 0xc7, 0x94, 0x1c, 0x9a, 0xd2, 0x45, 0x3d, 0x57, 0xe9, 0x14, 0x7d, + 0x6e, 0x8f, 0xbc, 0x3c, 0x2d, 0x96, 0x91, 0x7e, 0xb7, 0x9a, 0xb5, 0xa7, + 0xf4, 0xec, 0x13, 0xa6, 0x84, 0x66, 0x34, 0x99, 0xb2, 0x13, 0xb0, 0x80, + 0xa3, 0xfa, 0x8e, 0xca, 0x59, 0x8c, 0xe3, 0x7b, 0x18, 0x57, 0xd6, 0xc1, + 0x57, 0xde, 0x6f, 0xb1, 0x74, 0xa5, 0xcf, 0x1c, 0x03, 0x19, 0x60, 0x1f, + 0x4f, 0x3a, 0x90, 0x89, 0x92, 0x51, 0x1c, 0x32, 0x7a, 0x15, 0x32, 0x1a, + 0x80, 0x6c, 0x52, 0xf2, 0x52, 0xa5, 0x4f, 0x9e, 0xaf, 0x24, 0xe5, 0x39, + 0xe8, 0xeb, 0xb3, 0x95, 0xb8, 0x3c, 0x53, 0xe9, 0x92, 0xa7, 0x2b, 0x31, + 0x79, 0x4a, 0xc9, 0x2d, 0x07, 0xdb, 0x50, 0xb2, 0x0c, 0x5f, 0x9f, 0x96, + 0x70, 0x27, 0xe4, 0xd1, 0x01, 0xfd, 0x69, 0x87, 0x6e, 0x7e, 0xa5, 0x37, + 0x2c, 0xb3, 0xbd, 0x92, 0x59, 0x8f, 0xfe, 0x9b, 0xd2, 0xa6, 0xe2, 0x91, + 0x89, 0xe7, 0x93, 0xd3, 0x21, 0xc9, 0x59, 0x8f, 0xcb, 0x85, 0x19, 0x53, + 0x26, 0x2b, 0xdb, 0x6f, 0x72, 0x65, 0xc6, 0xf6, 0xbc, 0x9c, 0x9f, 0x69, + 0xc2, 0xb3, 0x79, 0x79, 0x79, 0xb3, 0x2e, 0x13, 0xb3, 0x6f, 0x89, 0x09, + 0x1e, 0x0e, 0x29, 0x79, 0x3f, 0x2e, 0xff, 0xfc, 0x27, 0x22, 0x23, 0xe0, + 0x8b, 0xde, 0xff, 0xef, 0xd5, 0x8c, 0x05, 0x7e, 0xf4, 0xf7, 0x41, 0x3f, + 0x74, 0x5c, 0x29, 0xcf, 0x38, 0xc6, 0x98, 0x5a, 0xce, 0x39, 0x0d, 0x9b, + 0x6a, 0xd5, 0xb2, 0xc7, 0x45, 0x0a, 0xc7, 0xab, 0x52, 0x48, 0x85, 0xe4, + 0x01, 0xab, 0x2a, 0x43, 0xa9, 0x26, 0x39, 0x60, 0x75, 0xca, 0x44, 0xdf, + 0xcf, 0x68, 0x3e, 0x96, 0x7d, 0xa5, 0x92, 0xc6, 0x3d, 0xfb, 0x44, 0x66, + 0xd5, 0xbd, 0xdb, 0x5f, 0xac, 0x84, 0x24, 0x13, 0x2d, 0xc6, 0x4c, 0xb9, + 0xa0, 0xb9, 0xb4, 0xed, 0xf4, 0x9f, 0x41, 0x5e, 0x63, 0xc0, 0x90, 0x84, + 0xd2, 0xa5, 0xfc, 0xf4, 0x9a, 0x8b, 0x19, 0xd5, 0x1d, 0x52, 0x7a, 0x6a, + 0xa4, 0x4d, 0xd2, 0x31, 0xa6, 0xa5, 0xa3, 0xd2, 0xad, 0xec, 0x64, 0x00, + 0x63, 0x06, 0xb5, 0xbb, 0x2b, 0x94, 0x37, 0xee, 0xcb, 0xa4, 0x75, 0x03, + 0xc6, 0x9a, 0xb8, 0x66, 0x3c, 0x9a, 0x83, 0x74, 0x72, 0x2e, 0xd2, 0xc9, + 0xeb, 0xde, 0x00, 0x9d, 0xfb, 0x6a, 0xf7, 0xb3, 0x81, 0xfb, 0x62, 0xe5, + 0xd7, 0x5b, 0x5c, 0xfa, 0xc8, 0xd7, 0x41, 0x99, 0x98, 0x7e, 0xc8, 0x5b, + 0x0b, 0xf7, 0x65, 0xae, 0xb1, 0x00, 0x3e, 0xa9, 0x91, 0x57, 0x58, 0xab, + 0x18, 0x58, 0xeb, 0x70, 0x60, 0xad, 0xc3, 0x81, 0xb5, 0x8a, 0xe0, 0xad, + 0xac, 0xd3, 0x81, 0x33, 0x79, 0xc2, 0xbc, 0x1c, 0xc5, 0x9c, 0x6f, 0x88, + 0x91, 0xa6, 0x2d, 0xf8, 0x36, 0xf9, 0x07, 0x18, 0x9f, 0x96, 0x73, 0x0e, + 0x78, 0x73, 0x3c, 0x24, 0x77, 0xa9, 0x71, 0xff, 0xb1, 0xc6, 0xa5, 0x31, + 0xf8, 0x2c, 0x2c, 0xbb, 0xa2, 0xbc, 0xf7, 0x9f, 0x99, 0xe0, 0x37, 0xdb, + 0x93, 0x37, 0xb8, 0x6d, 0xde, 0x9f, 0xf5, 0xf6, 0xd2, 0xee, 0xbe, 0x57, + 0x79, 0x53, 0x61, 0xc6, 0x62, 0x85, 0xb6, 0x2d, 0x29, 0xc3, 0x96, 0xfd, + 0x43, 0xa9, 0x4e, 0x99, 0xb4, 0xb4, 0xd4, 0x44, 0xb2, 0x99, 0xfc, 0xcf, + 0xe8, 0x76, 0x2b, 0xec, 0x47, 0xe2, 0x3a, 0x71, 0x51, 0xed, 0xeb, 0x5b, + 0x1e, 0xfd, 0x16, 0xdb, 0x23, 0xba, 0xdd, 0xd1, 0xd0, 0x4f, 0xfd, 0xff, + 0x4b, 0xdc, 0xd3, 0x06, 0xfa, 0x75, 0x77, 0xed, 0xbf, 0x42, 0x9b, 0x58, + 0x15, 0xf1, 0xda, 0xfe, 0xf3, 0xff, 0x32, 0x96, 0xb7, 0x8f, 0x6d, 0x5c, + 0xde, 0xf6, 0x6d, 0x29, 0x88, 0x73, 0xdc, 0x2b, 0x6c, 0xd8, 0xa6, 0xfe, + 0x85, 0x40, 0x6b, 0x0a, 0x36, 0xdc, 0xec, 0xd1, 0xf0, 0xba, 0x47, 0x03, + 0x68, 0xc5, 0xb8, 0x89, 0x0a, 0xdf, 0x51, 0xa2, 0x6c, 0x68, 0x93, 0xf7, + 0xfe, 0xfd, 0x5a, 0xf5, 0xfc, 0x0d, 0x83, 0xeb, 0xf8, 0x57, 0xd1, 0x86, + 0x60, 0x67, 0x93, 0xb3, 0xa6, 0xe4, 0x53, 0x31, 0x65, 0x0f, 0xf9, 0x54, + 0x1d, 0x3f, 0x26, 0xa7, 0x1b, 0xf1, 0x83, 0xef, 0x11, 0x3f, 0x5c, 0xec, + 0x98, 0x98, 0x25, 0x8e, 0xd4, 0x71, 0xe3, 0xc8, 0xb4, 0x8f, 0x25, 0x9c, + 0x9b, 0x18, 0xe2, 0xe3, 0x07, 0xdf, 0x23, 0x7e, 0x18, 0x90, 0x15, 0xe7, + 0xf4, 0xd7, 0x9f, 0x6a, 0x98, 0x7b, 0x4a, 0x61, 0x93, 0x8b, 0xcb, 0x6f, + 0x06, 0x70, 0xbe, 0x0b, 0x18, 0x1d, 0x85, 0xfc, 0x7c, 0x8c, 0x26, 0x76, + 0xc6, 0x80, 0xeb, 0xe0, 0x91, 0xc2, 0xe4, 0x08, 0x70, 0xcc, 0xf4, 0x30, + 0x35, 0xec, 0x61, 0x6a, 0x04, 0x78, 0xca, 0xb6, 0xe5, 0xb5, 0xa3, 0x5e, + 0x3b, 0x86, 0x36, 0xfc, 0xef, 0x1c, 0x6d, 0xec, 0xb5, 0x43, 0xe3, 0xb3, + 0x0a, 0xa7, 0x89, 0xf1, 0xc0, 0x0a, 0xe2, 0x2c, 0xf1, 0xb6, 0x4b, 0x16, + 0xca, 0x58, 0xaf, 0x86, 0x69, 0x94, 0x47, 0x90, 0x1e, 0xd2, 0xb2, 0x46, + 0xf4, 0xc7, 0xdc, 0xfd, 0xe8, 0xe9, 0xcf, 0xeb, 0xd2, 0xc2, 0x7d, 0x90, + 0xee, 0x1b, 0x41, 0x2b, 0xf7, 0xf6, 0xa3, 0xa4, 0x95, 0xeb, 0x35, 0xd2, + 0x7b, 0x1a, 0xf4, 0x66, 0x80, 0xb7, 0xa2, 0x8d, 0xf6, 0x8e, 0x82, 0xde, + 0x11, 0x60, 0xf1, 0x30, 0xb0, 0x78, 0x27, 0xb0, 0x78, 0x08, 0x58, 0x9c, + 0x06, 0x0e, 0x0f, 0x02, 0x87, 0x07, 0x80, 0xc3, 0x29, 0xec, 0x2b, 0x2a, + 0xf3, 0xc0, 0xe5, 0x79, 0xe0, 0xf3, 0x3c, 0xe4, 0x35, 0x31, 0x27, 0xda, + 0x17, 0xb0, 0xfe, 0x63, 0x33, 0x89, 0xd3, 0xd0, 0xcd, 0x58, 0x51, 0x87, + 0x3d, 0xa5, 0x06, 0xa1, 0x23, 0x49, 0x29, 0x55, 0x46, 0xa5, 0x40, 0x3f, + 0xb6, 0xb9, 0x07, 0xb6, 0x0b, 0xfb, 0x89, 0xf9, 0x71, 0xd3, 0x5a, 0xef, + 0xfa, 0xf7, 0x22, 0xf6, 0x1f, 0x83, 0x27, 0x89, 0xb8, 0xc8, 0xb0, 0xe4, + 0x9d, 0x1e, 0x2b, 0xab, 0x27, 0x31, 0x8e, 0xed, 0xb8, 0xb6, 0xf7, 0x78, + 0x42, 0x1b, 0x3f, 0xce, 0x3d, 0x4d, 0x03, 0xe3, 0xaa, 0x32, 0x95, 0xa2, + 0xad, 0x56, 0xe5, 0x54, 0x2a, 0x31, 0x58, 0x94, 0x56, 0x39, 0x12, 0x9d, + 0x56, 0xfe, 0xcd, 0x4c, 0x1f, 0x53, 0xfa, 0x51, 0xb0, 0x71, 0x2d, 0x77, + 0x6b, 0xf9, 0xe3, 0xf4, 0x3b, 0x3d, 0xf8, 0x85, 0x40, 0x0b, 0xe7, 0x37, + 0x65, 0x68, 0x40, 0xb4, 0x7d, 0xbd, 0x45, 0xa0, 0x62, 0xc2, 0x3a, 0x87, + 0x95, 0x73, 0xd3, 0x3d, 0xb1, 0x9c, 0x6e, 0xca, 0x98, 0xa9, 0xc9, 0x04, + 0xec, 0x65, 0x28, 0xf5, 0x7f, 0xd5, 0x23, 0x51, 0x3e, 0x6f, 0x96, 0xdf, + 0x51, 0x38, 0x8b, 0xb5, 0x4b, 0xb3, 0x58, 0x37, 0x04, 0xfe, 0x71, 0x5d, + 0xce, 0x83, 0x36, 0x30, 0xcf, 0xb4, 0x13, 0xa7, 0x8b, 0xb2, 0x1d, 0x76, + 0xb7, 0x4e, 0xb2, 0x7d, 0x4d, 0x92, 0x19, 0x89, 0xcb, 0xc4, 0xcc, 0x76, + 0xe0, 0x1e, 0x64, 0x60, 0xb7, 0x48, 0x7e, 0x34, 0x2e, 0x5f, 0x9e, 0x61, + 0x5f, 0x06, 0xfb, 0x4f, 0x1c, 0xcd, 0x08, 0xf7, 0x1f, 0x52, 0xfb, 0x8a, + 0xeb, 0x19, 0x39, 0xe0, 0xbc, 0xa4, 0xbb, 0x76, 0xe9, 0xb6, 0xf7, 0x42, + 0x1e, 0xa7, 0xc0, 0xef, 0xbc, 0x63, 0xcb, 0x02, 0xfc, 0x4a, 0xee, 0x38, + 0x70, 0xd5, 0x6e, 0x03, 0x06, 0x26, 0xce, 0xd2, 0x3e, 0x0c, 0xc4, 0x5a, + 0x25, 0xc5, 0xeb, 0x2e, 0x39, 0x3e, 0xa3, 0xcb, 0xb3, 0xb7, 0xc5, 0xd1, + 0x06, 0xd6, 0xa6, 0x12, 0x67, 0xc6, 0xf4, 0x2e, 0xb9, 0xb5, 0x23, 0x86, + 0xf7, 0x52, 0x5a, 0xde, 0xf9, 0x37, 0xf2, 0xf2, 0x64, 0x5c, 0xe7, 0x58, + 0x5d, 0x72, 0x29, 0x03, 0x3a, 0x56, 0xc4, 0xf8, 0x7f, 0x40, 0x7f, 0x97, + 0xcc, 0x21, 0xbe, 0x99, 0x03, 0x4d, 0xd9, 0x14, 0xb1, 0x30, 0x71, 0x72, + 0x49, 0x07, 0x66, 0xcd, 0x41, 0x37, 0x47, 0x11, 0x3f, 0xcc, 0xfc, 0x37, + 0xc6, 0xc4, 0x21, 0xd3, 0x1e, 0x6b, 0x02, 0xf8, 0x92, 0xe9, 0xe2, 0x3d, + 0xe7, 0xb4, 0xe5, 0x94, 0x43, 0x1d, 0x8a, 0xcb, 0xe3, 0x15, 0xbe, 0xd7, + 0x73, 0xf6, 0x69, 0xb1, 0xe5, 0x41, 0xe7, 0x7f, 0x30, 0xfe, 0x1d, 0xc4, + 0x9e, 0x96, 0x94, 0x20, 0xb7, 0x02, 0x78, 0x99, 0x89, 0xb9, 0xed, 0x89, + 0xb9, 0xc4, 0xd9, 0x0b, 0x3a, 0xef, 0xed, 0xe2, 0x82, 0x7e, 0xb3, 0x48, + 0x07, 0xf9, 0x99, 0x02, 0x2f, 0x6d, 0x4b, 0xd7, 0x37, 0x7b, 0xf1, 0x16, + 0x6d, 0xc0, 0x06, 0x7d, 0xa6, 0x2c, 0xf4, 0x07, 0x6d, 0x80, 0x7e, 0xd6, + 0xb7, 0x81, 0x44, 0x6c, 0x49, 0xd7, 0xf1, 0xdc, 0x94, 0x63, 0xaa, 0xad, + 0x81, 0xd6, 0x44, 0x8c, 0xfb, 0x9b, 0x2c, 0x27, 0xe5, 0x71, 0x87, 0xe3, + 0xc1, 0xe7, 0xe9, 0x88, 0x37, 0x1e, 0xf1, 0x8e, 0xc3, 0x98, 0x29, 0x09, + 0x9a, 0x5d, 0xbb, 0x58, 0x98, 0x8e, 0xaa, 0x67, 0x47, 0x1c, 0x37, 0x36, + 0xd2, 0x11, 0x3f, 0xcd, 0x23, 0x7e, 0xca, 0x29, 0x1b, 0xb1, 0x32, 0x88, + 0xaf, 0xe1, 0x67, 0x5d, 0xfb, 0x28, 0x95, 0x49, 0xcb, 0x3d, 0xa0, 0x2f, + 0x51, 0x04, 0x31, 0xc7, 0x74, 0xb8, 0xeb, 0xec, 0x80, 0x14, 0x19, 0x63, + 0x9d, 0x33, 0x1e, 0x91, 0xb1, 0x12, 0xfd, 0x1b, 0x7e, 0x8e, 0x6d, 0x31, + 0xa6, 0xcf, 0x28, 0xdf, 0xd3, 0x03, 0x3d, 0x80, 0x5f, 0x4a, 0xb5, 0x8b, + 0xeb, 0x07, 0xf7, 0x40, 0x9e, 0xc3, 0x90, 0x7b, 0x5a, 0xc6, 0x4f, 0x8c, + 0x53, 0xa7, 0x93, 0x25, 0x49, 0x24, 0x8f, 0xc8, 0x16, 0x6b, 0x01, 0xbe, + 0x30, 0x33, 0x5a, 0xdd, 0xae, 0xa7, 0xf9, 0xce, 0xa3, 0x78, 0x07, 0xd7, + 0xd2, 0xb8, 0x3c, 0x50, 0x61, 0xdf, 0x9d, 0x86, 0xb4, 0xc0, 0x56, 0x06, + 0xf6, 0x78, 0x76, 0x80, 0xf9, 0x4c, 0x7f, 0xbe, 0x71, 0x6f, 0x3e, 0x8e, + 0xe3, 0x18, 0xbe, 0x53, 0x9f, 0x77, 0x07, 0x7d, 0x1b, 0xb0, 0x64, 0x87, + 0x5e, 0xdd, 0x1e, 0xc2, 0xf3, 0x53, 0x03, 0xbc, 0xc7, 0x3c, 0xf0, 0x6d, + 0x96, 0x3d, 0x8c, 0xb1, 0xa3, 0x98, 0x73, 0x8d, 0x64, 0x3b, 0x7d, 0x7a, + 0xa9, 0x03, 0x8c, 0x3f, 0xd8, 0x8e, 0xae, 0x77, 0x79, 0xff, 0x25, 0xc3, + 0xd5, 0xc9, 0x11, 0xb4, 0x69, 0x7f, 0x07, 0x25, 0xe7, 0x24, 0xb0, 0x4f, + 0xf0, 0xb6, 0x32, 0xe1, 0xed, 0x11, 0xfc, 0x1f, 0x39, 0x0c, 0x3e, 0x48, + 0xd1, 0xe5, 0x0d, 0xf9, 0x42, 0x9e, 0xfc, 0x16, 0x74, 0xff, 0x61, 0x8c, + 0x81, 0x7f, 0x50, 0x3c, 0x58, 0xea, 0x70, 0x63, 0xd1, 0x44, 0x31, 0xc3, + 0xfc, 0xa9, 0x83, 0x98, 0x07, 0xfc, 0xa9, 0x40, 0xb1, 0x30, 0xf7, 0x92, + 0xbe, 0x86, 0xf4, 0xc6, 0x97, 0x0c, 0x83, 0xed, 0xe4, 0x12, 0x74, 0xb8, + 0x04, 0xf9, 0x64, 0xfb, 0x68, 0xb3, 0x36, 0xe4, 0x31, 0x63, 0x50, 0x5f, + 0x4b, 0x88, 0x05, 0xf3, 0xce, 0x16, 0xeb, 0x5e, 0xf2, 0xcd, 0xb2, 0xe4, + 0x69, 0x27, 0x88, 0x1d, 0x3b, 0x30, 0x94, 0x7a, 0x18, 0x85, 0x1e, 0x98, + 0xf0, 0xc9, 0x31, 0xc8, 0xfc, 0xc5, 0x0e, 0x77, 0x2f, 0xbc, 0x37, 0x65, + 0xde, 0xc2, 0x9a, 0xce, 0xef, 0xaf, 0x73, 0xfb, 0x78, 0xcf, 0xb8, 0xc8, + 0x97, 0xab, 0x4f, 0x3b, 0xe5, 0xdb, 0x28, 0xd3, 0x43, 0xd8, 0x0b, 0xfb, + 0x71, 0x2d, 0x1d, 0x94, 0x71, 0xd0, 0x56, 0x18, 0xd8, 0x14, 0x3b, 0x8f, + 0xf1, 0x39, 0xe0, 0x79, 0xd1, 0xe4, 0xb3, 0x8b, 0x5a, 0xfd, 0x1d, 0xc4, + 0x5c, 0x36, 0xfd, 0xd9, 0x92, 0xf6, 0x85, 0xca, 0xcb, 0x5a, 0xb6, 0x74, + 0x51, 0xcb, 0x41, 0x4f, 0x4a, 0x0e, 0x73, 0x06, 0xda, 0x8f, 0x85, 0xb5, + 0x13, 0xb1, 0xb7, 0xf5, 0x9e, 0xf8, 0x02, 0xb0, 0x60, 0x2f, 0x6c, 0x3a, + 0x67, 0xee, 0x94, 0x02, 0xb0, 0x35, 0x7f, 0x62, 0x0b, 0xec, 0x2d, 0x1e, + 0xa0, 0x8b, 0x78, 0x56, 0xa4, 0x4f, 0xd5, 0x76, 0x38, 0x52, 0x6c, 0x4a, + 0x13, 0xd7, 0x36, 0x41, 0x77, 0xd0, 0x57, 0xae, 0xeb, 0xdf, 0x1d, 0x2b, + 0x68, 0x45, 0x7e, 0x39, 0xb0, 0x9c, 0xde, 0x92, 0x5c, 0x99, 0xde, 0x1d, + 0x35, 0x7a, 0x89, 0x19, 0xc0, 0x7f, 0xd8, 0xcd, 0x4b, 0xd0, 0xdf, 0xe7, + 0x1d, 0xe0, 0xbf, 0x03, 0xfc, 0x87, 0x4d, 0x3d, 0x03, 0xdd, 0x7b, 0xda, + 0x81, 0x0f, 0x70, 0xe0, 0x03, 0x1c, 0xf8, 0x00, 0x27, 0x0b, 0x39, 0x11, + 0xe7, 0xe9, 0x43, 0x76, 0xd7, 0x7c, 0x9e, 0x1b, 0x37, 0xdd, 0xe0, 0xc5, + 0x22, 0xa3, 0x88, 0x45, 0x36, 0xc8, 0x44, 0xf2, 0x7a, 0xec, 0xad, 0x05, + 0xd7, 0x56, 0x5c, 0xb1, 0x46, 0xf2, 0x76, 0xcf, 0x4e, 0x1e, 0x06, 0x5d, + 0x88, 0xbf, 0x93, 0x3f, 0x0d, 0x3d, 0x6c, 0x02, 0x3d, 0x3f, 0xe5, 0xc5, + 0x2c, 0x0f, 0x9a, 0xae, 0x1e, 0xb6, 0xa2, 0xef, 0x93, 0xe8, 0x6b, 0xc5, + 0x98, 0x03, 0x18, 0xc3, 0x98, 0xa7, 0xcd, 0xeb, 0x0b, 0x8e, 0x63, 0xec, + 0xf3, 0x19, 0xac, 0x95, 0xc0, 0xb8, 0x36, 0xcc, 0xdd, 0x85, 0x31, 0xdb, + 0x30, 0xe6, 0x46, 0xb4, 0x19, 0x33, 0x6f, 0x44, 0xfb, 0x13, 0x0d, 0xef, + 0x7c, 0x0c, 0x7d, 0xb7, 0x37, 0xf4, 0x9d, 0x43, 0x1f, 0xf2, 0x50, 0xeb, + 0xbc, 0xf7, 0x5e, 0x11, 0xed, 0xce, 0x86, 0x31, 0xaf, 0xa2, 0x0f, 0x71, + 0xaf, 0xf5, 0x2d, 0x5c, 0x91, 0x7f, 0x5a, 0xa4, 0xc9, 0x7f, 0xc6, 0xb8, + 0x37, 0x8e, 0xfe, 0x90, 0x17, 0xbb, 0xfe, 0xa6, 0x09, 0xbd, 0xd3, 0x86, + 0x9c, 0xdf, 0x30, 0xdd, 0x58, 0xef, 0x4e, 0xcb, 0xd5, 0x43, 0xbf, 0xfd, + 0x70, 0x43, 0x9b, 0x63, 0x17, 0x1a, 0xfa, 0xfe, 0xa5, 0xa1, 0xfd, 0xdd, + 0xd0, 0xca, 0x77, 0x06, 0xdb, 0x97, 0xf7, 0x15, 0x3a, 0x96, 0xb7, 0xed, + 0xa6, 0x95, 0xef, 0xe8, 0xeb, 0x96, 0xf7, 0xdd, 0xb8, 0xbe, 0x61, 0x0c, + 0x74, 0x2a, 0x8a, 0x1c, 0xc9, 0x1f, 0x1f, 0xbe, 0xce, 0x7d, 0x4e, 0xfe, + 0x36, 0xea, 0x92, 0xda, 0x3a, 0xda, 0x3a, 0xe4, 0xb0, 0xa4, 0xc1, 0x9e, + 0x2c, 0x3d, 0xfd, 0xb2, 0x96, 0x83, 0x4e, 0x65, 0x2b, 0xfe, 0x7c, 0xb4, + 0xd9, 0xc6, 0xdc, 0xdc, 0xcf, 0xc9, 0x19, 0x2b, 0x45, 0xa0, 0x37, 0xf7, + 0xd0, 0x27, 0x1d, 0x2d, 0x4a, 0xdd, 0x3e, 0xbb, 0xf5, 0x4b, 0xd9, 0xe7, + 0xed, 0x1e, 0x46, 0x1d, 0x06, 0x9d, 0x55, 0x19, 0x49, 0x35, 0xd3, 0xc7, + 0x78, 0xd8, 0x45, 0xdc, 0xa9, 0x56, 0x8d, 0xcd, 0x55, 0xd9, 0x9f, 0x7a, + 0xa7, 0x2a, 0x0a, 0xf3, 0x06, 0x15, 0xee, 0xc4, 0xf5, 0x1e, 0xc8, 0xc8, + 0x42, 0x6e, 0x82, 0x7c, 0x3a, 0x4a, 0x9f, 0x74, 0x90, 0xf1, 0xc9, 0xa3, + 0x2e, 0xa6, 0x12, 0x77, 0xd0, 0x46, 0x5e, 0x96, 0x3f, 0xce, 0xf5, 0x71, + 0x2d, 0x11, 0xc7, 0x47, 0x95, 0x4f, 0xc9, 0x5b, 0x9c, 0x77, 0x35, 0x6c, + 0x3c, 0x6b, 0x32, 0xa6, 0x33, 0xed, 0xd3, 0xf0, 0x6f, 0x7c, 0xc6, 0x58, + 0xe1, 0x34, 0xe3, 0x92, 0x00, 0x56, 0x6d, 0x35, 0xe0, 0x32, 0x8b, 0xcb, + 0xf7, 0xb5, 0x81, 0x79, 0xc4, 0x55, 0xec, 0x75, 0x75, 0x2c, 0xea, 0xd1, + 0xaf, 0x6c, 0xdb, 0xbb, 0x6a, 0xb6, 0xed, 0xeb, 0xde, 0x6a, 0x39, 0xf8, + 0xf7, 0x95, 0x2c, 0x9e, 0xaa, 0x24, 0x8e, 0x15, 0x61, 0x4b, 0x8b, 0x2a, + 0xef, 0xf6, 0xe5, 0xc2, 0x18, 0x27, 0x71, 0x72, 0x1e, 0x6f, 0x8e, 0xab, + 0x1c, 0x83, 0xf9, 0x45, 0x55, 0x76, 0xa4, 0x5a, 0xa3, 0xe4, 0x43, 0x46, + 0xff, 0x76, 0x88, 0x31, 0xc3, 0xa2, 0x43, 0x9e, 0xa5, 0xf0, 0x3c, 0x05, + 0x4c, 0xf8, 0x27, 0xc9, 0x45, 0xd9, 0xf7, 0x76, 0x75, 0x01, 0x71, 0x95, + 0x8a, 0x8f, 0x94, 0xbf, 0x67, 0x7c, 0xb7, 0x1f, 0xfc, 0x22, 0x4f, 0x47, + 0xc0, 0x67, 0x3f, 0x06, 0x78, 0x8d, 0x75, 0x15, 0x59, 0x1e, 0x07, 0x8b, + 0x3c, 0x50, 0x7e, 0x19, 0x73, 0xea, 0x6e, 0xac, 0xc2, 0x3c, 0xdc, 0x66, + 0x7f, 0x47, 0x88, 0xb1, 0x9c, 0xeb, 0xeb, 0x0d, 0xac, 0x87, 0xdc, 0xbe, + 0xfc, 0x8f, 0x2a, 0x6e, 0x2a, 0x28, 0x79, 0x20, 0x86, 0xaa, 0xf0, 0x19, + 0xfb, 0xc2, 0x5e, 0xec, 0x1c, 0xf1, 0x62, 0x65, 0xcb, 0x8b, 0x95, 0x49, + 0x07, 0x6b, 0x6f, 0x7e, 0x5c, 0x40, 0x99, 0x2d, 0x1d, 0xd2, 0x37, 0x33, + 0x2e, 0x68, 0x93, 0xd5, 0xe3, 0x02, 0x9f, 0xa6, 0x6d, 0xa0, 0x89, 0x71, + 0x9e, 0xaa, 0xbd, 0x74, 0xb8, 0xf5, 0x1e, 0xd2, 0xe0, 0xfb, 0x47, 0xe5, + 0x87, 0x8f, 0xc2, 0xe5, 0x61, 0x6f, 0x69, 0xd0, 0xba, 0x53, 0xb2, 0xd3, + 0xdb, 0x3c, 0x7f, 0xcb, 0x1c, 0x80, 0xf1, 0xb7, 0xab, 0xb3, 0xd9, 0xd4, + 0x84, 0x3f, 0x4f, 0x27, 0x3c, 0x64, 0xa0, 0x2e, 0xc4, 0xb5, 0x18, 0xc7, + 0xf8, 0x31, 0xcd, 0x4e, 0x2f, 0xa6, 0x19, 0x96, 0xfd, 0x8e, 0x1b, 0xf3, + 0x8f, 0xa0, 0x3f, 0xef, 0x28, 0xda, 0x63, 0x8c, 0x2d, 0x75, 0xc4, 0xdc, + 0x99, 0x3d, 0x09, 0x24, 0x0f, 0xee, 0x5e, 0xba, 0xb1, 0x97, 0x52, 0x6d, + 0x2f, 0xad, 0x4b, 0xcb, 0xf7, 0x32, 0xaa, 0xde, 0x9d, 0x5a, 0xf1, 0xae, + 0x60, 0x1f, 0xbb, 0x2f, 0xf1, 0x8c, 0x7b, 0x64, 0xdc, 0x60, 0x79, 0x7b, + 0xf4, 0xe5, 0x74, 0x00, 0x7b, 0x4c, 0x6a, 0x79, 0x15, 0x6b, 0xed, 0x51, + 0x3c, 0xcf, 0x97, 0xc7, 0x70, 0xa5, 0x7d, 0xa8, 0x79, 0x94, 0x8d, 0x4c, + 0x28, 0x3e, 0x8f, 0xab, 0x7d, 0x2c, 0x94, 0x7f, 0x41, 0x0a, 0x27, 0x7e, + 0x09, 0x7e, 0x2f, 0x58, 0x0f, 0x63, 0x2d, 0x91, 0xfc, 0x28, 0x06, 0xf0, + 0x93, 0x7b, 0x65, 0xad, 0xeb, 0x0f, 0x43, 0x6e, 0x7e, 0x10, 0x81, 0x8c, + 0x35, 0xf7, 0xb9, 0x5a, 0xdf, 0xe7, 0x6b, 0x53, 0x80, 0x9e, 0x2a, 0x62, + 0xce, 0x18, 0x68, 0x08, 0xbe, 0x73, 0x50, 0x86, 0x1c, 0xca, 0xa3, 0x27, + 0x36, 0x2e, 0xb6, 0x95, 0x17, 0x3f, 0xce, 0xe0, 0xfa, 0xb4, 0xf9, 0x5c, + 0xcc, 0x10, 0xd6, 0x2f, 0x7d, 0xde, 0xf9, 0x7c, 0x8b, 0x2c, 0x35, 0xea, + 0xc0, 0x14, 0xe8, 0x29, 0x38, 0xe4, 0x93, 0xaf, 0x9b, 0xfe, 0xda, 0xaf, + 0xaa, 0xfd, 0x4c, 0xaa, 0x9a, 0xdd, 0x73, 0x35, 0x1d, 0x9d, 0x40, 0x0c, + 0xe2, 0xea, 0xdc, 0x7d, 0x1e, 0x6f, 0x7c, 0xdd, 0x8c, 0x78, 0x72, 0x66, + 0x1e, 0x47, 0xdb, 0xf1, 0xf5, 0x60, 0x93, 0x75, 0xb7, 0xe2, 0x05, 0x9f, + 0x11, 0x53, 0x5c, 0x59, 0x8e, 0xd5, 0x64, 0xb9, 0xb6, 0x41, 0x2f, 0xbf, + 0xb7, 0xce, 0xb5, 0x43, 0xda, 0x1b, 0xec, 0x16, 0xf4, 0x3d, 0xb5, 0xcc, + 0xbe, 0x93, 0x97, 0xa8, 0x83, 0x46, 0xc4, 0x98, 0xfb, 0x53, 0xf0, 0xf2, + 0x63, 0xc8, 0x55, 0x44, 0xcc, 0x19, 0xe2, 0x10, 0xe3, 0x8d, 0x7a, 0xbc, + 0xbb, 0x20, 0xab, 0xc5, 0xba, 0x57, 0x8a, 0x35, 0x7e, 0xf2, 0x2a, 0x63, + 0x8d, 0x78, 0x93, 0xb4, 0x10, 0x8b, 0x86, 0x11, 0xdb, 0x6a, 0xd2, 0x64, + 0x3f, 0x08, 0x1f, 0x76, 0xc6, 0x6c, 0xb6, 0x7d, 0x4c, 0x88, 0x48, 0xfb, + 0xdc, 0x06, 0x85, 0x0b, 0xd6, 0x4c, 0x1d, 0x17, 0x26, 0xc0, 0xfb, 0x11, + 0xb7, 0xb6, 0x1a, 0x6d, 0x97, 0xab, 0xcd, 0x8d, 0xeb, 0x71, 0xff, 0x58, + 0x2d, 0xee, 0xbf, 0xa1, 0x81, 0x8f, 0xab, 0xe1, 0xe2, 0x19, 0xf0, 0x2d, + 0x8d, 0xfc, 0x97, 0x79, 0xed, 0x10, 0xf2, 0x61, 0xe6, 0x62, 0x19, 0xe4, + 0xc4, 0x89, 0x33, 0xc0, 0x2a, 0xe4, 0xc8, 0x89, 0xb7, 0xe0, 0x57, 0x90, + 0x37, 0x27, 0xe6, 0x99, 0xbb, 0x2e, 0x22, 0x3f, 0x7e, 0x1a, 0xf9, 0xf1, + 0x53, 0x95, 0x3e, 0xf0, 0x37, 0xa9, 0xb0, 0x73, 0xef, 0x71, 0xd1, 0xee, + 0x52, 0xf5, 0x61, 0xda, 0x73, 0x14, 0x7e, 0xb4, 0x5a, 0x3d, 0x90, 0xea, + 0x41, 0x4e, 0x1e, 0x97, 0x4f, 0x99, 0xcc, 0x63, 0x35, 0xb3, 0xbb, 0x7f, + 0xc1, 0x08, 0xc6, 0xa4, 0xd9, 0x2b, 0xfa, 0x81, 0x95, 0xbc, 0xcf, 0x29, + 0x5f, 0x70, 0xcc, 0xb8, 0x1c, 0xef, 0xef, 0xaa, 0xf1, 0xfe, 0xc2, 0x1a, + 0x69, 0x19, 0x56, 0x35, 0x80, 0xee, 0xfe, 0x03, 0xc4, 0xab, 0x14, 0xfc, + 0x3a, 0xfc, 0x6f, 0x55, 0xee, 0x48, 0x5d, 0xac, 0x9e, 0xb7, 0xd7, 0x49, + 0xbe, 0xef, 0x8b, 0x1e, 0x66, 0x8f, 0x3d, 0x92, 0xb5, 0x8b, 0xb0, 0x0f, + 0xb7, 0x16, 0x39, 0x3e, 0x1d, 0x46, 0x14, 0xca, 0xbf, 0x0e, 0x59, 0x18, + 0xfc, 0x1b, 0xc8, 0x70, 0xcb, 0x69, 0x16, 0xb0, 0x74, 0xe0, 0xf0, 0x42, + 0x34, 0xa2, 0xea, 0x33, 0xd7, 0xd9, 0xec, 0xb7, 0x20, 0xd3, 0x51, 0x59, + 0x40, 0xfc, 0x50, 0x1a, 0x04, 0x8d, 0x7d, 0x9d, 0x18, 0x4f, 0xbb, 0x23, + 0xcf, 0x47, 0xe1, 0x7b, 0xc9, 0xd3, 0x28, 0xc6, 0xef, 0xc2, 0x98, 0x0e, + 0x5c, 0xbf, 0x68, 0x2c, 0x58, 0xcc, 0x9d, 0x7f, 0x0e, 0x6d, 0xce, 0x11, + 0xf4, 0x9d, 0x9f, 0x0e, 0x89, 0x9a, 0x93, 0xef, 0x74, 0x2a, 0xfb, 0xaf, + 0xaf, 0xc5, 0x75, 0xf8, 0xec, 0xbd, 0xea, 0x2d, 0xfd, 0x83, 0x81, 0xf5, + 0xda, 0x02, 0xeb, 0x0d, 0x06, 0xd6, 0x23, 0x9d, 0x1d, 0x01, 0x3a, 0x3b, + 0xf0, 0x7e, 0x0e, 0x6b, 0x0f, 0xab, 0x98, 0xa7, 0xbe, 0xe6, 0xfd, 0x81, + 0x35, 0xfd, 0xfd, 0x75, 0x06, 0xde, 0x7b, 0x07, 0xeb, 0xb1, 0x2f, 0x1a, + 0xe8, 0x23, 0x0d, 0xeb, 0xd1, 0xc7, 0x76, 0x47, 0x80, 0x2e, 0xd2, 0xba, + 0x16, 0xfd, 0x2a, 0x7e, 0x02, 0x9f, 0x5b, 0xe0, 0xb7, 0x74, 0xf8, 0x0e, + 0xd6, 0xa0, 0x1b, 0xf7, 0xfa, 0x65, 0xac, 0xeb, 0xcf, 0x17, 0xc5, 0x1c, + 0x1c, 0xcf, 0xb1, 0x86, 0xf7, 0x3e, 0xfb, 0xf9, 0xfc, 0x1b, 0xd5, 0xaf, + 0x2b, 0xbe, 0xad, 0x07, 0xed, 0xaa, 0xee, 0x22, 0xf3, 0x1d, 0x26, 0xe4, + 0xc9, 0xfc, 0x58, 0x93, 0x9b, 0x6c, 0x5d, 0xeb, 0xe9, 0xa7, 0xec, 0xd7, + 0x79, 0x58, 0xda, 0xa2, 0x65, 0x8f, 0xb3, 0x5e, 0xd0, 0xea, 0xe5, 0x7c, + 0xc8, 0x3d, 0x94, 0x8f, 0x31, 0xbd, 0xe7, 0xf4, 0x31, 0x8c, 0x5b, 0xe8, + 0x3f, 0x33, 0xde, 0x3d, 0xae, 0xd0, 0xe1, 0x7d, 0xa5, 0x0e, 0x39, 0xaf, + 0x78, 0x6a, 0xc9, 0xb9, 0x1a, 0x4f, 0x43, 0xde, 0xb7, 0x90, 0x83, 0xde, + 0x77, 0x06, 0x03, 0x71, 0x11, 0xee, 0xcb, 0x19, 0xd0, 0x10, 0x97, 0x9e, + 0x7e, 0xe6, 0x6e, 0x45, 0x5c, 0x59, 0xa7, 0xd0, 0x70, 0x75, 0xeb, 0x17, + 0x3d, 0xfd, 0xf0, 0x4b, 0xc0, 0xa1, 0x9e, 0xfe, 0xef, 0xa8, 0x7c, 0xae, + 0x54, 0xb1, 0xb4, 0x3b, 0x1c, 0xb7, 0x46, 0x74, 0xce, 0xbe, 0x5c, 0x8d, + 0x68, 0xa0, 0x99, 0x75, 0x0d, 0xbf, 0x46, 0x74, 0x4e, 0x54, 0x8d, 0xe8, + 0xe4, 0x15, 0x6a, 0x44, 0x99, 0xab, 0xaf, 0x11, 0x71, 0x7e, 0x53, 0xee, + 0x1e, 0x10, 0xed, 0x4b, 0x5e, 0x8d, 0xe8, 0x82, 0xb8, 0x35, 0xa2, 0xf3, + 0xb2, 0x7a, 0x8d, 0xe8, 0x68, 0x43, 0x8d, 0x68, 0xbd, 0xaa, 0x11, 0x71, + 0x1e, 0xb7, 0x46, 0xc4, 0x76, 0xbe, 0x7f, 0x30, 0x50, 0xeb, 0x00, 0xfe, + 0x3a, 0xb7, 0x82, 0x6f, 0x96, 0x36, 0xea, 0xf8, 0x98, 0x46, 0xec, 0xbf, + 0xbe, 0xe6, 0xbf, 0xea, 0xf8, 0xa6, 0x29, 0x9d, 0xbb, 0x12, 0xbe, 0x8d, + 0xba, 0x71, 0xc9, 0x32, 0x6c, 0x9b, 0xaa, 0xc5, 0x2e, 0xbf, 0xdc, 0xcc, + 0x1c, 0x7a, 0xb2, 0x5c, 0x9f, 0x77, 0x12, 0xf2, 0x1e, 0xab, 0xd5, 0x49, + 0x2e, 0x15, 0x1f, 0x45, 0xe5, 0xe0, 0xaa, 0xdf, 0x9a, 0x62, 0x99, 0x95, + 0xdf, 0x9a, 0x34, 0x89, 0x82, 0xce, 0x7c, 0x7f, 0x5e, 0xe5, 0x5d, 0x0b, + 0xce, 0xcf, 0xcb, 0xd2, 0xbd, 0x16, 0xf0, 0xc7, 0xaf, 0x9f, 0x50, 0xbe, + 0x75, 0x9f, 0x92, 0xd5, 0x3f, 0xba, 0x1a, 0xca, 0x3e, 0x55, 0x43, 0xf9, + 0x5a, 0x73, 0xb0, 0x86, 0x72, 0x4e, 0x2e, 0x5f, 0x43, 0xd9, 0xb7, 0x4a, + 0x0d, 0xe5, 0x15, 0xa9, 0xd7, 0x50, 0x5e, 0x11, 0xbf, 0x86, 0x62, 0xc8, + 0xd2, 0x7a, 0xce, 0xb3, 0x1f, 0xef, 0x8c, 0xe0, 0x37, 0x8c, 0x9f, 0x5b, + 0x53, 0x39, 0x57, 0xa3, 0x7f, 0xb5, 0x9a, 0xca, 0x37, 0x9b, 0xdf, 0x4f, + 0x4d, 0xc5, 0xf5, 0x01, 0x7e, 0x4d, 0xa5, 0x05, 0xf1, 0x0e, 0x7c, 0x8e, + 0x1e, 0xac, 0xa9, 0xfc, 0x2d, 0xed, 0x01, 0x7d, 0x2a, 0x46, 0x40, 0x3f, + 0xec, 0x02, 0x7e, 0x29, 0xa3, 0x6a, 0x1c, 0x9f, 0xf6, 0x78, 0xb8, 0x1b, + 0x7b, 0x8e, 0x43, 0x16, 0xe4, 0x63, 0x8f, 0x8a, 0x2d, 0x33, 0x66, 0x4c, + 0xcb, 0xf6, 0xc2, 0x9b, 0x4d, 0xf3, 0x5b, 0x74, 0x4c, 0xc6, 0x2b, 0xd4, + 0xf1, 0x2e, 0xc4, 0xe2, 0x26, 0xfa, 0x76, 0xa3, 0xed, 0xc7, 0x54, 0xfd, + 0xb5, 0x39, 0x68, 0x9b, 0x0b, 0xc0, 0x59, 0xe0, 0xc4, 0x55, 0xf8, 0xa8, + 0x6d, 0xa0, 0x39, 0xb8, 0x8f, 0x22, 0xfc, 0x13, 0xfa, 0x94, 0xcc, 0x19, + 0x5b, 0xfa, 0xb4, 0xc4, 0x69, 0xe7, 0x57, 0x31, 0x1f, 0xfb, 0xb6, 0xa9, + 0x7c, 0xac, 0x30, 0xc0, 0xbd, 0xd2, 0xd7, 0x2d, 0x82, 0x3e, 0xf4, 0x95, + 0x98, 0x03, 0xd2, 0xef, 0xf9, 0x39, 0x5a, 0x44, 0xe5, 0x68, 0x9d, 0x8a, + 0x1f, 0xe4, 0xf5, 0x8d, 0x61, 0x62, 0x65, 0xa7, 0xcd, 0x3d, 0x0c, 0x7b, + 0x58, 0xc7, 0xb6, 0x9b, 0x0b, 0x66, 0x74, 0xde, 0x3f, 0x02, 0xb9, 0xb2, + 0x4e, 0xe3, 0xcb, 0xef, 0x21, 0x6f, 0xdf, 0x83, 0x52, 0xec, 0x94, 0xf0, + 0x7a, 0xd0, 0x93, 0x9f, 0x61, 0xdc, 0xfd, 0x09, 0x95, 0x83, 0x44, 0xed, + 0x4b, 0xdb, 0xed, 0x5d, 0xd7, 0x60, 0xb7, 0x23, 0x97, 0xb5, 0xdb, 0xcf, + 0x85, 0x83, 0x76, 0x7b, 0xd7, 0x35, 0xd8, 0xed, 0xfe, 0x6b, 0xb2, 0x5b, + 0xee, 0x8d, 0x98, 0xe4, 0xd7, 0xc4, 0x56, 0xc6, 0x59, 0xfe, 0xba, 0x13, + 0x58, 0x33, 0x73, 0x89, 0x35, 0xc7, 0x2e, 0x59, 0x5b, 0x6d, 0x8c, 0xb1, + 0xae, 0x46, 0xde, 0xcc, 0xad, 0xe8, 0x6f, 0x23, 0x9e, 0x5f, 0xba, 0xdd, + 0xcb, 0xe7, 0xfd, 0xbc, 0x3e, 0x68, 0x3f, 0xd4, 0x0b, 0xea, 0xc2, 0x63, + 0xe0, 0x17, 0xf5, 0xc1, 0xb7, 0xb9, 0x9e, 0x06, 0x1d, 0x5c, 0x44, 0xbe, + 0xdf, 0xe3, 0xe9, 0x20, 0x65, 0xdd, 0xab, 0xbe, 0x11, 0x95, 0x9c, 0x47, + 0xdc, 0x3c, 0x1f, 0x3a, 0x90, 0x2f, 0xf9, 0xb6, 0x06, 0x9e, 0x44, 0xfd, + 0x67, 0xe4, 0xa3, 0x8d, 0x98, 0x67, 0x0b, 0xe2, 0x35, 0xf0, 0x48, 0xf5, + 0x2f, 0xaf, 0x09, 0x5f, 0x1e, 0xcf, 0xa4, 0x18, 0xc2, 0xd8, 0x53, 0x03, + 0xb0, 0xf1, 0x01, 0x62, 0x54, 0x1a, 0x79, 0x0f, 0xf5, 0x90, 0xba, 0xb9, + 0x29, 0xb9, 0x43, 0x67, 0x4c, 0xb5, 0x07, 0xb6, 0x47, 0x7d, 0x8d, 0xcb, + 0x8e, 0xca, 0xa6, 0x33, 0xe7, 0x74, 0xae, 0x51, 0xad, 0xe6, 0x99, 0x2b, + 0x5a, 0xa2, 0x77, 0xf7, 0xff, 0x45, 0x98, 0x7e, 0xe9, 0x7a, 0xdb, 0xf0, + 0x74, 0x2d, 0x83, 0x7b, 0xea, 0xed, 0xeb, 0xf0, 0xf7, 0xfc, 0xc6, 0xfe, + 0x03, 0xf4, 0xc7, 0x60, 0xf3, 0xf4, 0xef, 0xcc, 0x47, 0xb6, 0x7a, 0xe3, + 0x7a, 0xd4, 0xf7, 0xcf, 0x6c, 0xea, 0x56, 0xef, 0xbb, 0x13, 0xfd, 0x4f, + 0x82, 0x3e, 0x7b, 0x99, 0x9c, 0x79, 0x46, 0x21, 0xa7, 0xf2, 0x19, 0xbe, + 0xaf, 0x74, 0x12, 0x39, 0x88, 0x19, 0xa8, 0xa5, 0x87, 0xbd, 0xdc, 0x8d, + 0x36, 0x16, 0x81, 0x0c, 0xb7, 0x7b, 0xb9, 0x0a, 0xf3, 0xd7, 0xe5, 0x67, + 0x13, 0x56, 0xd7, 0x81, 0x0d, 0xef, 0x43, 0x07, 0x1a, 0xe5, 0x17, 0x86, + 0xed, 0xfb, 0xf2, 0xf3, 0xe3, 0x98, 0x79, 0x6f, 0xdf, 0x3d, 0xae, 0x0c, + 0x7f, 0x2c, 0xf6, 0xa9, 0x05, 0xf6, 0xe9, 0xe3, 0xd1, 0x3e, 0x6f, 0x9f, + 0x5b, 0x1b, 0xf0, 0x68, 0xa4, 0xc1, 0x66, 0x3f, 0x4a, 0x3c, 0x3a, 0xb4, + 0xe6, 0xa3, 0xc7, 0x23, 0xee, 0x6b, 0xe3, 0xaa, 0x38, 0xe4, 0xee, 0xe3, + 0x77, 0x45, 0x4f, 0x7f, 0x98, 0xf9, 0xde, 0xfb, 0x91, 0x4f, 0x10, 0x47, + 0x28, 0x93, 0x36, 0x15, 0xc3, 0xba, 0xb6, 0x07, 0x5f, 0x5e, 0x0a, 0xc9, + 0x1b, 0xf7, 0x84, 0xe5, 0x7f, 0x6f, 0xe3, 0xf7, 0x30, 0xd3, 0xab, 0x69, + 0xb1, 0xfd, 0xc2, 0x1a, 0xd7, 0x0f, 0xbd, 0xd0, 0xee, 0xfa, 0x1d, 0xbe, + 0xe3, 0xdb, 0xb3, 0x85, 0xe7, 0x7c, 0xb6, 0x91, 0x5f, 0x4c, 0xae, 0x21, + 0x07, 0xdc, 0x64, 0x5d, 0xd0, 0x57, 0xcb, 0x01, 0x2f, 0x5f, 0x0f, 0xac, + 0xe7, 0x80, 0xc4, 0xd9, 0x0e, 0xa5, 0x1b, 0xf9, 0x28, 0x73, 0x1f, 0xc3, + 0xc3, 0x4e, 0xde, 0x23, 0xb7, 0x75, 0x90, 0xef, 0x42, 0xb6, 0xcf, 0x21, + 0x5e, 0x7a, 0xd6, 0x41, 0x8e, 0xeb, 0x20, 0xb7, 0x75, 0x90, 0xdb, 0x3a, + 0xc8, 0x6d, 0x9d, 0xa4, 0x97, 0x23, 0x8f, 0x78, 0x75, 0x7f, 0x7e, 0xe3, + 0x66, 0x7d, 0xa1, 0x08, 0x5f, 0x32, 0xc5, 0x73, 0x13, 0x7a, 0x36, 0xb5, + 0xc6, 0xdb, 0x9f, 0x5f, 0x13, 0xef, 0xf2, 0x6a, 0x36, 0xdf, 0x54, 0x75, + 0x43, 0xd1, 0x1f, 0x68, 0x71, 0xbf, 0x83, 0xf3, 0x7c, 0xc7, 0xaf, 0x21, + 0x2e, 0x51, 0x67, 0x88, 0x68, 0xa3, 0x55, 0x3d, 0xcd, 0x9a, 0x8c, 0xe8, + 0x7a, 0xfa, 0x16, 0xbc, 0xb3, 0xc5, 0xcd, 0x09, 0xa2, 0x62, 0xe8, 0xe9, + 0x56, 0xf2, 0x54, 0xd3, 0xd3, 0x6b, 0xbd, 0xb9, 0xf6, 0xb7, 0xb8, 0xb1, + 0x55, 0x2f, 0xdb, 0xa6, 0xce, 0x38, 0x41, 0xc5, 0xda, 0x7e, 0xff, 0xc5, + 0xf6, 0xe5, 0x6b, 0x85, 0x14, 0xbe, 0x67, 0x53, 0xf7, 0x62, 0x3e, 0xb6, + 0xeb, 0xfc, 0xd6, 0x2f, 0xc9, 0xef, 0x90, 0xc7, 0x6f, 0x97, 0xc7, 0x06, + 0xc7, 0xa9, 0xba, 0x30, 0x79, 0xed, 0xcf, 0xa7, 0xea, 0x7a, 0x58, 0x47, + 0x9d, 0xcd, 0xc0, 0xf5, 0x07, 0xa6, 0xb4, 0x8d, 0xee, 0x0e, 0xd9, 0xc1, + 0x75, 0xfd, 0x6f, 0xe2, 0x57, 0xb3, 0x66, 0x8f, 0xfa, 0x8e, 0xe6, 0xfa, + 0x8c, 0x90, 0xd2, 0x41, 0x33, 0xcd, 0x7d, 0xfd, 0x50, 0x9d, 0xa9, 0xa1, + 0xfe, 0xe5, 0x90, 0xc7, 0x4c, 0x0d, 0x6c, 0x8a, 0x9b, 0xfa, 0x48, 0x0b, + 0xeb, 0xaf, 0x43, 0x15, 0x1f, 0xf7, 0xb8, 0x5e, 0xa3, 0x1f, 0x67, 0x5d, + 0xcd, 0xc7, 0x33, 0xd9, 0xe0, 0xd6, 0xdb, 0x3e, 0x88, 0x2d, 0xb5, 0x34, + 0xd8, 0x92, 0xbf, 0x4f, 0xee, 0x9f, 0xd7, 0xd5, 0xcf, 0x43, 0x2c, 0x56, + 0x02, 0xdf, 0x47, 0x6a, 0xba, 0xc1, 0xb3, 0x2a, 0x9f, 0x85, 0x0e, 0xf2, + 0xdb, 0xc0, 0x4e, 0xd8, 0x51, 0xb5, 0x3a, 0xc4, 0x1a, 0x73, 0xdf, 0x67, + 0x54, 0x7e, 0xa9, 0xa7, 0xe7, 0x55, 0xfd, 0xc1, 0x5c, 0x51, 0x7f, 0x18, + 0x82, 0xae, 0x20, 0x06, 0x70, 0xda, 0x54, 0x4c, 0xa7, 0xe2, 0x85, 0x4a, + 0xe3, 0xf7, 0x97, 0xfb, 0x5b, 0x5d, 0x3e, 0xfc, 0x5d, 0x8b, 0xfb, 0x0d, + 0xe2, 0x8f, 0xa2, 0xcb, 0xdb, 0x7c, 0xff, 0xaf, 0x5b, 0xfc, 0xb3, 0x3b, + 0x85, 0x13, 0x43, 0xd0, 0x45, 0xe4, 0xe4, 0x6a, 0x3e, 0xc4, 0xbb, 0x4f, + 0xcc, 0x76, 0x2c, 0x1f, 0x8f, 0xbe, 0x13, 0xfe, 0xf8, 0x8e, 0x86, 0xf1, + 0x1d, 0x18, 0xff, 0x7b, 0x0d, 0xe3, 0x3b, 0x02, 0xe3, 0xa3, 0x0d, 0xe3, + 0xa3, 0x18, 0xff, 0x7c, 0xc3, 0xf8, 0x68, 0x60, 0x7c, 0x67, 0xc3, 0xf8, + 0x4e, 0x8c, 0x7f, 0xa1, 0x61, 0x3c, 0xfa, 0x4e, 0x34, 0x79, 0xdf, 0xc5, + 0x88, 0xb1, 0xfb, 0xbd, 0x5c, 0x1c, 0xd7, 0x72, 0xe3, 0xb7, 0x16, 0xea, + 0x5d, 0x17, 0x64, 0xe0, 0x9f, 0xa7, 0xa3, 0xbd, 0x66, 0x60, 0xaf, 0xf5, + 0x58, 0xc6, 0xd5, 0xc7, 0xa0, 0x2e, 0x12, 0x1f, 0x8a, 0x62, 0xd8, 0xd0, + 0x9d, 0x12, 0x74, 0xa8, 0xe4, 0xfb, 0x24, 0x9e, 0x83, 0xe2, 0x19, 0x53, + 0xd7, 0xf7, 0x86, 0xec, 0x45, 0x2f, 0x07, 0x7b, 0x9b, 0xb4, 0x03, 0x2f, + 0x7d, 0xcc, 0x94, 0x63, 0xae, 0xdd, 0x50, 0x7f, 0x39, 0xbf, 0x67, 0x3f, + 0xd4, 0x55, 0x6f, 0x9d, 0xa1, 0x15, 0xb8, 0x16, 0x5f, 0x51, 0xdb, 0x32, + 0xae, 0x02, 0xd7, 0x46, 0x6a, 0xb8, 0xf6, 0x59, 0x99, 0xaf, 0xe5, 0xdb, + 0xc3, 0x72, 0xc0, 0xd9, 0xc5, 0x33, 0x36, 0xc7, 0x32, 0xf2, 0xe1, 0xe4, + 0xdb, 0xbb, 0x6a, 0x7e, 0x92, 0x67, 0x3a, 0x96, 0x0e, 0x31, 0x87, 0xf2, + 0x6b, 0xb3, 0x53, 0xce, 0xcf, 0xb6, 0x42, 0x2e, 0xb0, 0x8d, 0x6b, 0xcd, + 0xb7, 0x39, 0x5f, 0x54, 0x0e, 0xb8, 0xe7, 0x1d, 0x6a, 0xf3, 0x16, 0x6b, + 0xf3, 0xc6, 0x3c, 0x7b, 0xa3, 0x0f, 0xae, 0xfb, 0xcb, 0x1c, 0xfc, 0xe5, + 0x18, 0x72, 0xee, 0x45, 0x67, 0xb5, 0xfa, 0xe8, 0xb5, 0xfa, 0xcb, 0xc6, + 0x3a, 0x73, 0xa3, 0xbf, 0xe4, 0x3a, 0x8d, 0xb5, 0xe5, 0x78, 0x03, 0xfe, + 0x53, 0x9f, 0x0e, 0x7b, 0x31, 0x35, 0xae, 0xa5, 0xc3, 0xb0, 0x47, 0x5d, + 0xc6, 0x94, 0xfe, 0xb2, 0xed, 0xe7, 0x96, 0xbb, 0x6b, 0xb9, 0x65, 0x3d, + 0x1f, 0x44, 0xec, 0x9a, 0xfc, 0xa4, 0x87, 0x8f, 0x8c, 0x91, 0xa7, 0xd0, + 0x7f, 0x0c, 0x3a, 0xc0, 0x67, 0xac, 0x97, 0xde, 0x2c, 0x9f, 0x32, 0x5d, + 0xff, 0xe4, 0xd6, 0xa6, 0x76, 0xab, 0xf8, 0x9f, 0xdf, 0x0b, 0x0a, 0xa9, + 0x76, 0x2f, 0xde, 0xbb, 0x12, 0xae, 0x2e, 0xcf, 0x4d, 0x75, 0xfd, 0x51, + 0xbc, 0xcb, 0xdc, 0xd4, 0x8c, 0x10, 0x43, 0xb3, 0x95, 0xcb, 0xbe, 0x5f, + 0xa4, 0x7f, 0x29, 0xa8, 0xef, 0x82, 0x2a, 0x0f, 0xc5, 0xb8, 0x45, 0xef, + 0x7d, 0x37, 0x0f, 0xcd, 0x56, 0xbe, 0xdd, 0xea, 0xe2, 0xe0, 0xe5, 0x72, + 0x96, 0x9f, 0x88, 0xb0, 0xae, 0xb7, 0xe8, 0x5c, 0x89, 0xd6, 0x95, 0x79, + 0xaf, 0xb1, 0x22, 0xef, 0x1d, 0xf5, 0xf2, 0xda, 0xcf, 0xa9, 0xbc, 0xd7, + 0xe5, 0x31, 0xf7, 0x12, 0xcc, 0xa3, 0x6c, 0x60, 0x21, 0xbf, 0xa9, 0x10, + 0x1f, 0x26, 0x94, 0xdf, 0xca, 0x4f, 0xdf, 0x09, 0x3e, 0x47, 0x57, 0xd1, + 0x9b, 0x8f, 0xda, 0x4f, 0xf8, 0x7b, 0x3f, 0x2c, 0x6e, 0xbd, 0x6e, 0x27, + 0x68, 0x61, 0x6e, 0x15, 0xf2, 0xf4, 0xe1, 0xbb, 0xde, 0x39, 0x53, 0x7f, + 0x9c, 0x9f, 0xc7, 0xd7, 0xbe, 0xbb, 0x16, 0x33, 0xcb, 0xea, 0x27, 0x1b, + 0x09, 0xc3, 0x90, 0x7b, 0xe6, 0x1a, 0xbe, 0x5b, 0x7c, 0x90, 0xf3, 0x11, + 0x8d, 0x7e, 0x8d, 0xdf, 0x4d, 0xf9, 0xad, 0x54, 0xb4, 0xbb, 0x7b, 0x6d, + 0xd8, 0x00, 0xcf, 0x2c, 0x07, 0xf1, 0x35, 0x2c, 0xf9, 0x39, 0x09, 0x47, + 0xd3, 0xfc, 0x06, 0x40, 0xff, 0xff, 0xba, 0xb7, 0xcf, 0x98, 0xec, 0x9f, + 0x71, 0x6b, 0x9e, 0xfa, 0x65, 0xcf, 0xc5, 0x1d, 0x00, 0x1f, 0x12, 0x47, + 0xfd, 0x9a, 0xa7, 0xee, 0x9e, 0x8b, 0x3b, 0xfa, 0xe1, 0x9d, 0x8b, 0xe3, + 0xfc, 0xa6, 0xec, 0x5a, 0xe5, 0x5c, 0x9c, 0x71, 0x95, 0xe7, 0xe2, 0xda, + 0x55, 0xcd, 0x93, 0xf3, 0xb8, 0x35, 0x4f, 0xb6, 0xbb, 0xfb, 0x59, 0x2b, + 0xe1, 0xd9, 0xb7, 0x01, 0x75, 0x06, 0xb9, 0xbb, 0xff, 0x47, 0x91, 0xa3, + 0x7c, 0x3d, 0xf2, 0xd1, 0xe7, 0x28, 0xdc, 0xcb, 0xaf, 0xb8, 0xdf, 0x77, + 0xe5, 0x5a, 0xea, 0x00, 0x1f, 0xac, 0xae, 0xb9, 0x5f, 0xd5, 0x35, 0xbf, + 0x13, 0x09, 0xd6, 0x35, 0xf5, 0x2b, 0x9c, 0x0d, 0xdb, 0xbf, 0x4a, 0x5d, + 0x33, 0x14, 0x38, 0x1b, 0x16, 0xf2, 0xce, 0x86, 0xb5, 0xdb, 0xc8, 0x25, + 0xbd, 0x3a, 0xa6, 0x7e, 0xd9, 0xb3, 0x61, 0xff, 0x19, 0xf9, 0xe0, 0x75, + 0xcc, 0x15, 0x67, 0xc3, 0xe0, 0xeb, 0x36, 0x48, 0xfc, 0x9a, 0xf2, 0x9e, + 0x0f, 0x92, 0xf3, 0xf0, 0xbc, 0x7e, 0x13, 0xf6, 0x1c, 0x92, 0x5d, 0x51, + 0xea, 0x27, 0xcf, 0x36, 0xf6, 0xc2, 0x16, 0x70, 0xad, 0xb0, 0x9d, 0xa4, + 0x8c, 0xb4, 0x91, 0xde, 0xe5, 0xe7, 0x10, 0xea, 0xe7, 0x71, 0xc3, 0xb5, + 0xf3, 0xb8, 0x47, 0xa0, 0x37, 0xfa, 0x4c, 0x58, 0x16, 0x02, 0x3a, 0x35, + 0x85, 0x78, 0x4f, 0x9f, 0xb3, 0xbc, 0xe7, 0xfc, 0x9f, 0x8a, 0x28, 0x30, + 0x8f, 0x67, 0x78, 0xdb, 0xc4, 0x98, 0x73, 0xbf, 0x59, 0xba, 0xff, 0x57, + 0x12, 0xc3, 0x18, 0x9e, 0xf1, 0x0c, 0xc9, 0x01, 0x55, 0xb3, 0xf0, 0x75, + 0x79, 0xc7, 0x5a, 0x69, 0x59, 0x9f, 0xa9, 0xb7, 0xa3, 0xab, 0xf8, 0x7d, + 0xc4, 0x91, 0x33, 0xd4, 0xe7, 0x5b, 0x25, 0xe7, 0xd5, 0x83, 0x0a, 0x95, + 0x6d, 0x5e, 0x7e, 0xa1, 0xbe, 0xed, 0x80, 0x97, 0xdd, 0x9e, 0x0f, 0xc6, + 0xb5, 0xd4, 0x4d, 0x9f, 0x87, 0x35, 0x4e, 0xca, 0xd0, 0xf4, 0x96, 0xd8, + 0x38, 0xf0, 0x6e, 0x4c, 0xad, 0x79, 0x2d, 0x3c, 0xd7, 0x2e, 0xf1, 0xbd, + 0xf1, 0x6a, 0xf9, 0xee, 0xc7, 0xc7, 0x8f, 0x62, 0x7f, 0xdd, 0xd0, 0x8f, + 0x87, 0x25, 0x77, 0xe2, 0x66, 0x19, 0x9a, 0x4d, 0x80, 0x9e, 0x1f, 0x56, + 0x0b, 0x29, 0xc4, 0xd2, 0x4f, 0xf0, 0xdc, 0x18, 0x30, 0x14, 0x7c, 0x7b, + 0x66, 0xc5, 0x77, 0xec, 0xe0, 0x59, 0xb3, 0x64, 0xed, 0xec, 0xd0, 0x53, + 0x15, 0x09, 0x77, 0x90, 0xe6, 0x99, 0xfa, 0xd9, 0xef, 0xc5, 0xca, 0x0e, + 0xe5, 0xdb, 0x9e, 0xac, 0x2c, 0xab, 0xfd, 0x28, 0x19, 0x4e, 0x94, 0x9f, + 0x04, 0x2f, 0x5e, 0x51, 0xfe, 0xed, 0x88, 0x23, 0x37, 0x19, 0x42, 0x79, + 0x88, 0x06, 0x1e, 0xa8, 0x33, 0x1c, 0xee, 0xf7, 0xfd, 0x2e, 0x25, 0x57, + 0x17, 0x2b, 0x76, 0x06, 0xce, 0x60, 0xd4, 0x65, 0xeb, 0x9e, 0xcd, 0x70, + 0x65, 0xe1, 0x9e, 0x1f, 0x21, 0x3f, 0x97, 0x0e, 0xed, 0xb2, 0xdd, 0xf3, + 0x23, 0x3d, 0x73, 0xec, 0xeb, 0x6c, 0xf0, 0x7d, 0x61, 0xe8, 0x00, 0xcf, + 0x1d, 0xf1, 0xcc, 0x37, 0x69, 0x56, 0xb5, 0x8e, 0x55, 0xbf, 0x6d, 0x5f, + 0x5b, 0xcd, 0xd5, 0x5d, 0xb3, 0x5b, 0xad, 0x79, 0x9d, 0x87, 0x59, 0xfe, + 0x59, 0xef, 0x94, 0xf6, 0xff, 0xd4, 0x5d, 0x7b, 0x6c, 0x1b, 0xf7, 0x7d, + 0xff, 0xf2, 0x48, 0x3d, 0xac, 0xe7, 0x49, 0xa6, 0x64, 0x5a, 0x52, 0x94, + 0x3b, 0xe9, 0x64, 0x29, 0xb1, 0x12, 0x70, 0x9e, 0xba, 0x0a, 0x88, 0x9a, + 0xb0, 0x24, 0xfd, 0x58, 0x10, 0x0c, 0xb4, 0xad, 0x64, 0xee, 0x92, 0xad, + 0x0e, 0x25, 0xa7, 0x1d, 0x30, 0x60, 0x6e, 0xd6, 0x02, 0x69, 0x07, 0xc7, + 0x0c, 0x65, 0x27, 0xc6, 0xaa, 0x88, 0x4c, 0xcc, 0x6a, 0x1d, 0xb0, 0x62, + 0x1c, 0xa5, 0x38, 0x69, 0xa7, 0x80, 0x69, 0xda, 0x04, 0xc5, 0xfe, 0xb1, + 0x26, 0x3b, 0x7b, 0x61, 0x7f, 0x04, 0xdb, 0x80, 0x1a, 0x5b, 0x81, 0xba, + 0x76, 0x8a, 0x65, 0x1b, 0xe0, 0x34, 0xdb, 0xb0, 0x75, 0x58, 0x0b, 0xee, + 0xfb, 0xf9, 0x3d, 0xc8, 0x23, 0x79, 0xd4, 0xc3, 0x71, 0x06, 0x4c, 0x80, + 0x40, 0xde, 0xf1, 0x77, 0x77, 0xbf, 0xdf, 0xf7, 0xf7, 0x7d, 0xbf, 0x6e, + 0x2e, 0x33, 0x1e, 0xf2, 0x33, 0x7e, 0xcf, 0x15, 0x61, 0x5f, 0x37, 0xd2, + 0xe1, 0x36, 0x83, 0x67, 0xa4, 0x0e, 0x9e, 0xd5, 0x34, 0xc1, 0xf6, 0x78, + 0x99, 0x77, 0x4b, 0xd8, 0xc9, 0xf3, 0xc8, 0x63, 0xd7, 0x39, 0x0e, 0x12, + 0x76, 0x65, 0x1a, 0x5a, 0x72, 0xe7, 0x37, 0x54, 0x60, 0x77, 0xb2, 0x0c, + 0xbb, 0x3d, 0xff, 0x8f, 0x60, 0x77, 0x4d, 0xe8, 0xbf, 0xdf, 0x2e, 0x22, + 0x6f, 0x4d, 0xeb, 0x00, 0xba, 0x6e, 0x09, 0x70, 0x04, 0x3f, 0xb5, 0xf3, + 0xeb, 0x04, 0x9e, 0x8a, 0xbc, 0xe2, 0x52, 0xe9, 0x3b, 0xe1, 0xb2, 0x9f, + 0x92, 0xed, 0x12, 0xd8, 0x27, 0xf0, 0xe7, 0x35, 0x96, 0x91, 0x47, 0x6f, + 0x4b, 0x46, 0x42, 0x57, 0xaa, 0xb5, 0x4f, 0x7e, 0xbb, 0xcb, 0x6d, 0x9f, + 0x1c, 0xdd, 0xa1, 0x7d, 0x72, 0x5a, 0xda, 0x27, 0xa9, 0xed, 0xdb, 0x27, + 0x03, 0x75, 0x79, 0x5d, 0x95, 0xf5, 0xec, 0xdc, 0x3e, 0x31, 0x36, 0xb5, + 0x4f, 0x46, 0x5d, 0xbe, 0x18, 0xcc, 0xf7, 0x57, 0x29, 0x75, 0x0c, 0x3c, + 0x4e, 0xc3, 0x19, 0x30, 0x3e, 0x56, 0xe3, 0x17, 0xfe, 0x38, 0x61, 0xfd, + 0xd7, 0xff, 0xc7, 0xb0, 0x1e, 0xac, 0xf3, 0x79, 0x57, 0xd6, 0x03, 0x21, + 0xfe, 0x51, 0x60, 0x3d, 0xd8, 0xd0, 0x77, 0xda, 0x38, 0x67, 0xb1, 0xda, + 0x77, 0x3a, 0x62, 0x34, 0xe2, 0xed, 0x7f, 0xe4, 0xf2, 0xa9, 0xba, 0xf9, + 0x3b, 0x68, 0x8a, 0x7c, 0x47, 0xc7, 0xf5, 0xb3, 0x40, 0x4b, 0x76, 0x2a, + 0x45, 0xb0, 0x99, 0xf0, 0xbc, 0x90, 0xa0, 0xb5, 0x1a, 0x7d, 0x8b, 0x9f, + 0xc7, 0xeb, 0x7b, 0xf5, 0x09, 0x21, 0xa7, 0xa4, 0xff, 0x01, 0xe3, 0x27, + 0x7c, 0xf3, 0x62, 0xac, 0xcc, 0x6f, 0x52, 0xfe, 0x08, 0xa5, 0xfb, 0x37, + 0xf2, 0x43, 0xd4, 0xcb, 0xbc, 0x9d, 0xd9, 0x0a, 0x9a, 0xc6, 0xef, 0xe6, + 0x7d, 0x09, 0x55, 0xd9, 0x5a, 0xe0, 0x9f, 0xa7, 0x59, 0x2f, 0x18, 0x29, + 0xeb, 0x04, 0xd5, 0x7b, 0x73, 0x4e, 0xd8, 0x74, 0x9a, 0x77, 0x26, 0x64, + 0xee, 0xa9, 0x38, 0x0f, 0x3d, 0x4d, 0xf3, 0xce, 0x5a, 0x3d, 0xf8, 0x6e, + 0x0f, 0xbc, 0xf0, 0xca, 0x69, 0x2a, 0xef, 0x9d, 0x85, 0x9c, 0xf3, 0xb8, + 0xe7, 0xde, 0x95, 0x6b, 0xc2, 0x52, 0x95, 0xb1, 0xf2, 0xfa, 0xb8, 0x58, + 0xd7, 0x0f, 0x8e, 0x44, 0x51, 0xfb, 0x56, 0xae, 0x17, 0xab, 0xad, 0x77, + 0x82, 0x1c, 0xd0, 0x74, 0xa8, 0x6b, 0xa2, 0x01, 0x8b, 0x61, 0x8f, 0x7a, + 0x27, 0xb7, 0x2c, 0xc1, 0x75, 0xb5, 0xb0, 0xa8, 0xc8, 0x91, 0xf3, 0x4a, + 0x8e, 0x14, 0x5c, 0x7c, 0xbc, 0x5e, 0x6f, 0xef, 0xf5, 0xd0, 0xdb, 0xbd, + 0x6a, 0x9e, 0x30, 0xa7, 0x67, 0x58, 0x0f, 0xb9, 0x1f, 0x7a, 0x88, 0x89, + 0xba, 0x25, 0xa9, 0x8b, 0xe0, 0x77, 0x96, 0x35, 0xaf, 0x86, 0x18, 0x57, + 0x8e, 0xd0, 0x53, 0xac, 0x6b, 0x5f, 0xa2, 0x7b, 0x94, 0x7d, 0x16, 0x71, + 0xe5, 0x99, 0x22, 0x8f, 0xdf, 0x47, 0xa9, 0x27, 0xec, 0x89, 0x08, 0x1d, + 0xa1, 0x53, 0x22, 0x67, 0x06, 0xf1, 0x3d, 0xe4, 0x1c, 0xdc, 0x2b, 0x9e, + 0x2f, 0x7d, 0x19, 0x77, 0x22, 0xa7, 0x6e, 0xfb, 0xf9, 0xfb, 0xba, 0x56, + 0x2f, 0x2a, 0x9e, 0xb9, 0xaa, 0x68, 0x4a, 0x9c, 0xe3, 0xeb, 0x9f, 0x31, + 0xea, 0xaf, 0x8f, 0x18, 0xf1, 0x62, 0xdc, 0x88, 0xae, 0x60, 0xdc, 0x33, + 0x46, 0xac, 0x08, 0x1b, 0x52, 0xe3, 0x88, 0x1d, 0x06, 0xbd, 0x6d, 0xd0, + 0xd6, 0xb1, 0x88, 0x02, 0xd5, 0xd4, 0x49, 0x6c, 0x63, 0xde, 0x87, 0xaa, + 0xe6, 0xad, 0xe1, 0x8b, 0xef, 0xf0, 0xf7, 0x44, 0x18, 0xa6, 0x5a, 0xaf, + 0x6d, 0x83, 0x7f, 0x7d, 0x22, 0x45, 0x9b, 0xe9, 0xb5, 0x76, 0x9d, 0x5e, + 0x5b, 0xd8, 0x72, 0xde, 0x1f, 0x95, 0xc6, 0x65, 0x3d, 0xa2, 0xdf, 0x11, + 0xfa, 0x2b, 0xcf, 0xbb, 0x4a, 0xb7, 0xad, 0xc1, 0x29, 0x8c, 0xd1, 0x7e, + 0x70, 0xed, 0x07, 0xeb, 0x52, 0xf9, 0xc0, 0x3a, 0x3f, 0xa1, 0x0d, 0xf5, + 0x5e, 0xa6, 0xcc, 0x6b, 0x85, 0x8d, 0xb5, 0xce, 0xf3, 0x83, 0xbd, 0xf5, + 0xa0, 0x98, 0x23, 0xdb, 0x5b, 0x56, 0x8c, 0xa4, 0xaf, 0x7b, 0xbe, 0x58, + 0x55, 0xff, 0xe9, 0x51, 0x07, 0x39, 0xe2, 0x51, 0x07, 0xe9, 0xa6, 0xb5, + 0x80, 0x8b, 0xd6, 0x42, 0x2e, 0xbd, 0x6d, 0x88, 0xed, 0x96, 0x0e, 0xe6, + 0x21, 0xb0, 0x5b, 0xda, 0xc8, 0xff, 0xb2, 0xdb, 0x6e, 0xa9, 0xad, 0x45, + 0x07, 0xdd, 0x41, 0x37, 0x93, 0x36, 0x4c, 0x3c, 0x57, 0xae, 0x63, 0xe7, + 0x75, 0x57, 0x6a, 0x0e, 0x57, 0xea, 0xea, 0x23, 0xbd, 0xe6, 0x3b, 0x5c, + 0x37, 0x5f, 0xc8, 0xaf, 0x48, 0x43, 0x9d, 0xce, 0xcb, 0xae, 0xba, 0x53, + 0xf3, 0xab, 0xe5, 0x67, 0x78, 0xd6, 0x88, 0xf0, 0x79, 0xa7, 0xca, 0xbc, + 0x6c, 0x5a, 0xce, 0x37, 0x53, 0x6d, 0x67, 0xf8, 0x97, 0x48, 0xc1, 0xce, + 0x9b, 0xb7, 0xef, 0xcc, 0x7f, 0xd6, 0x5e, 0x23, 0x77, 0xdf, 0x33, 0xa5, + 0x5f, 0xac, 0x49, 0xe5, 0x61, 0xf7, 0x29, 0x7b, 0x6f, 0x2b, 0x7c, 0xc7, + 0xb9, 0x26, 0xe5, 0x4b, 0xb4, 0xad, 0x3c, 0x01, 0xcf, 0x8f, 0x9d, 0x68, + 0x72, 0x4c, 0x15, 0xcb, 0x42, 0xbc, 0x0a, 0x78, 0xaf, 0xef, 0x0f, 0x9e, + 0xbd, 0x9d, 0x3d, 0xb3, 0xea, 0xf6, 0x4c, 0xe2, 0x15, 0x6c, 0x2d, 0xe4, + 0x17, 0x4f, 0xd6, 0xe4, 0x78, 0x7f, 0x14, 0x58, 0x74, 0x79, 0xe4, 0x3d, + 0x23, 0x6f, 0xb9, 0xd1, 0x3c, 0xaf, 0xbb, 0xf4, 0x72, 0xcc, 0xb7, 0x54, + 0x7a, 0x23, 0x3c, 0x20, 0x65, 0x71, 0xd1, 0x5b, 0x47, 0x32, 0xb7, 0x3d, + 0xbf, 0x5a, 0xd9, 0xbb, 0x77, 0x9b, 0xb2, 0x57, 0xf4, 0xf4, 0xf0, 0x1d, + 0x14, 0x3c, 0xa0, 0x83, 0x56, 0x72, 0xc8, 0xbf, 0xfe, 0x05, 0xd0, 0x3c, + 0xf3, 0x59, 0x57, 0x4d, 0x9a, 0xf7, 0x3e, 0x96, 0x63, 0x2a, 0x81, 0x19, + 0xc4, 0xfe, 0x90, 0x5b, 0xd2, 0xcb, 0xbc, 0x07, 0xe3, 0xc7, 0xac, 0xab, + 0xf0, 0xf7, 0x2a, 0xff, 0x53, 0x5c, 0xc9, 0x97, 0x83, 0xdb, 0x88, 0xad, + 0xec, 0x8c, 0x4f, 0xdb, 0xd6, 0x3a, 0x21, 0xee, 0x83, 0x7c, 0xe1, 0xfb, + 0xba, 0xa8, 0xeb, 0x33, 0x2d, 0x2d, 0xce, 0x97, 0x7a, 0x64, 0x2c, 0x0a, + 0xbf, 0x75, 0xd0, 0x2b, 0x39, 0xe4, 0x72, 0xe3, 0xb7, 0xdf, 0xe0, 0xdf, + 0xbc, 0x78, 0x94, 0xce, 0x45, 0x87, 0x2e, 0x27, 0xf7, 0x27, 0x4f, 0xb0, + 0x95, 0x4a, 0xf4, 0xb7, 0xe1, 0x5f, 0x94, 0xf1, 0x8c, 0xe2, 0x9d, 0x8e, + 0xd5, 0x78, 0xf9, 0x0b, 0xdf, 0xec, 0xb9, 0xdd, 0xdc, 0xc8, 0x2f, 0x6c, + 0xcb, 0x5f, 0x88, 0x38, 0xff, 0x76, 0x62, 0x26, 0x3a, 0x36, 0x3c, 0x25, + 0x6a, 0x4e, 0xdd, 0x78, 0x70, 0x67, 0xe2, 0xc3, 0xc0, 0x87, 0xe1, 0x3a, + 0x5e, 0xf5, 0xd1, 0xfd, 0xfd, 0xb5, 0x70, 0x6d, 0xf3, 0xf4, 0x55, 0x79, + 0xc7, 0x81, 0x11, 0xf3, 0x87, 0x9f, 0xfa, 0x21, 0x9a, 0xbf, 0x08, 0x1c, + 0x36, 0x18, 0xdb, 0x46, 0x69, 0x21, 0x88, 0xba, 0x22, 0x51, 0x9b, 0xa3, + 0xe2, 0x86, 0xb2, 0x56, 0x68, 0x5e, 0xd4, 0x40, 0x8e, 0x85, 0x6e, 0xf2, + 0xbc, 0xe7, 0x8b, 0x29, 0x3a, 0xc5, 0x32, 0xf6, 0xd4, 0x4a, 0x45, 0x77, + 0xaf, 0xaf, 0x83, 0xac, 0xc6, 0xf1, 0x9b, 0x02, 0xc7, 0x87, 0x36, 0xc5, + 0xf1, 0xc3, 0x65, 0x1c, 0xff, 0x44, 0xaf, 0xc4, 0xe7, 0x67, 0xf9, 0x5e, + 0x5d, 0x74, 0x50, 0xdc, 0x37, 0xc5, 0xdf, 0xdb, 0xe9, 0xa0, 0xec, 0x61, + 0xc1, 0xcf, 0x66, 0x1e, 0x9f, 0x49, 0xd1, 0x53, 0x17, 0x53, 0xbe, 0xb8, + 0xa8, 0x5f, 0x70, 0xf7, 0xe8, 0xd0, 0xd7, 0x63, 0x5c, 0x23, 0xfc, 0xd7, + 0x7c, 0x49, 0xd6, 0x5c, 0xe5, 0x25, 0x7f, 0xa2, 0x77, 0xc3, 0x83, 0x35, + 0xf8, 0x5f, 0x6d, 0x3b, 0x9e, 0x56, 0x32, 0xf0, 0xd8, 0x26, 0x7e, 0x8d, + 0x7a, 0xbc, 0xec, 0xf1, 0xd0, 0x87, 0x7f, 0xbd, 0x57, 0xc6, 0xa9, 0x36, + 0xf3, 0x6b, 0xb8, 0x71, 0xb4, 0x2a, 0x6e, 0xcf, 0x7c, 0xff, 0xbf, 0x55, + 0x1c, 0xfd, 0xa5, 0x5e, 0x29, 0x2f, 0x50, 0x1f, 0x98, 0x60, 0x38, 0x9c, + 0x64, 0x5d, 0x65, 0x90, 0x9a, 0x5f, 0xd6, 0x6b, 0x1d, 0x14, 0xfc, 0xd6, + 0xed, 0xa7, 0x39, 0xa7, 0x6a, 0xbb, 0xd3, 0xae, 0x35, 0x9d, 0x13, 0x36, + 0x4e, 0x63, 0x7a, 0x6b, 0x9c, 0x73, 0x35, 0x54, 0x23, 0x13, 0x6a, 0xf1, + 0x0d, 0xbd, 0x4f, 0xb0, 0xbf, 0x64, 0x48, 0x3d, 0x78, 0x9a, 0xf5, 0xdb, + 0x9d, 0xc6, 0x8b, 0x3e, 0xaa, 0x8e, 0x58, 0xdb, 0x53, 0xa3, 0xf6, 0x3b, + 0xf6, 0x41, 0xda, 0x1c, 0xc9, 0x57, 0x1f, 0x12, 0xbc, 0xe0, 0xdc, 0x64, + 0x89, 0x62, 0xe1, 0x4e, 0x4a, 0x4e, 0xf2, 0xb3, 0xa7, 0x1d, 0xb6, 0xbd, + 0xfc, 0x94, 0x62, 0xfa, 0x4d, 0x4e, 0xee, 0x52, 0xfa, 0xa2, 0xf6, 0xa7, + 0xb7, 0xa8, 0x3c, 0x87, 0x67, 0x45, 0x5c, 0x52, 0xf6, 0xc6, 0xe0, 0xef, + 0x2b, 0xfa, 0xde, 0xcf, 0x8a, 0xf8, 0x68, 0xf2, 0x62, 0xb3, 0x1a, 0xd7, + 0xee, 0x1a, 0x87, 0x31, 0xed, 0x6a, 0x2c, 0xee, 0xa9, 0x75, 0x8a, 0x56, + 0xc5, 0x6f, 0x1f, 0x11, 0x75, 0x60, 0xb2, 0x56, 0x0f, 0xbf, 0x9f, 0xa6, + 0xb9, 0xf2, 0x5a, 0xda, 0x79, 0xec, 0xcf, 0x4a, 0x11, 0x61, 0xcb, 0xb5, + 0xb3, 0xce, 0x8b, 0x79, 0xd7, 0xcf, 0x09, 0x6b, 0xf1, 0x8b, 0xf8, 0x10, + 0x7f, 0x57, 0xcf, 0x39, 0x59, 0x9e, 0x13, 0x72, 0x34, 0xec, 0x90, 0xbc, + 0x97, 0x1e, 0xd7, 0xee, 0x1a, 0xa7, 0x79, 0x85, 0x8e, 0x3f, 0xfc, 0x80, + 0xe7, 0xf1, 0x37, 0x2a, 0x87, 0xd7, 0x14, 0xf1, 0x53, 0x99, 0xa3, 0xa1, + 0xbf, 0xc3, 0xbf, 0x8c, 0x9c, 0x0a, 0xe4, 0x49, 0xb8, 0xf9, 0x8d, 0x5c, + 0x6f, 0x00, 0xb2, 0xa8, 0x88, 0xb8, 0x29, 0xe2, 0x15, 0x8d, 0x74, 0xe7, + 0xbd, 0xc8, 0xcd, 0xdf, 0x81, 0x0e, 0xba, 0x1d, 0xfa, 0xb3, 0x3c, 0xe8, + 0xcf, 0xfd, 0x7c, 0xd4, 0xc1, 0xa1, 0x1e, 0x2e, 0x35, 0x61, 0x50, 0x89, + 0x6d, 0x05, 0x83, 0xf2, 0xa6, 0x8f, 0x9e, 0x72, 0xec, 0xf0, 0x0a, 0xc9, + 0x9a, 0xc9, 0xd8, 0xa2, 0x3d, 0xb1, 0x4e, 0xfb, 0x45, 0xcd, 0x38, 0x7a, + 0x1f, 0xe4, 0x59, 0x06, 0x9f, 0xa4, 0x09, 0xb6, 0x8f, 0xd8, 0xfe, 0x9c, + 0x45, 0xbc, 0x45, 0xef, 0x0b, 0x6a, 0xe0, 0xf1, 0x39, 0xc1, 0x70, 0x7a, + 0x6c, 0x37, 0xb5, 0x45, 0xf8, 0x9e, 0x13, 0xe0, 0x4f, 0xe8, 0xe7, 0x45, + 0x51, 0xb6, 0x93, 0x60, 0xb3, 0x9e, 0x9c, 0xb5, 0xcd, 0x3c, 0x19, 0x3c, + 0x16, 0xb6, 0x2b, 0xee, 0x83, 0xeb, 0x23, 0x66, 0x13, 0xd5, 0xd6, 0xe4, + 0x3e, 0x2b, 0xea, 0x14, 0xdf, 0x0d, 0xdf, 0x47, 0x46, 0x3f, 0xf8, 0x15, + 0xf6, 0xed, 0x5e, 0x15, 0x27, 0x3a, 0xcb, 0xdf, 0xc7, 0xd5, 0xf7, 0xaf, + 0x88, 0xfd, 0x94, 0xdf, 0x35, 0x7e, 0xe3, 0xef, 0x5f, 0x5a, 0xc8, 0xf9, + 0xa1, 0xca, 0x59, 0xa9, 0xca, 0x05, 0x09, 0x8d, 0x1a, 0x5f, 0xa1, 0xd3, + 0x2b, 0x9b, 0xf9, 0x5f, 0xbc, 0x6a, 0x5d, 0xbb, 0xb7, 0x59, 0xeb, 0xfa, + 0x07, 0xbb, 0x65, 0x6d, 0x99, 0x7b, 0x2e, 0xff, 0xc9, 0x73, 0xf1, 0xd2, + 0xc9, 0xea, 0xf4, 0x44, 0x5e, 0x6f, 0x89, 0xfe, 0x29, 0xfc, 0x49, 0xba, + 0x1e, 0x0c, 0xa9, 0x9c, 0x25, 0xe4, 0x28, 0xdd, 0xa7, 0xf0, 0x5a, 0xf3, + 0x7e, 0xf2, 0xe0, 0xfd, 0x8f, 0x89, 0x5c, 0x4d, 0x29, 0x3b, 0x06, 0x15, + 0x3c, 0x00, 0xb3, 0x90, 0x0b, 0x66, 0x7d, 0x2e, 0x98, 0x19, 0xea, 0x7b, + 0xa7, 0x38, 0x3e, 0xbd, 0xf2, 0x99, 0x6e, 0x59, 0x2f, 0x8e, 0x58, 0xe2, + 0xbc, 0xfa, 0xbe, 0xd5, 0x7a, 0x7f, 0xce, 0x6b, 0x15, 0xfe, 0x26, 0xd7, + 0x5a, 0x5f, 0x27, 0x72, 0x5a, 0x82, 0xf5, 0x30, 0xf8, 0x8e, 0xeb, 0x3c, + 0xe6, 0x38, 0xe6, 0x9a, 0xe3, 0x88, 0x6b, 0x8e, 0x77, 0x37, 0x98, 0x23, + 0xf3, 0xf8, 0xe2, 0x69, 0xfe, 0xbf, 0xdd, 0xb9, 0xca, 0x79, 0xce, 0x0b, + 0x78, 0xb6, 0x53, 0x3a, 0x18, 0x52, 0xb2, 0xe3, 0xfb, 0xaa, 0x16, 0xdd, + 0x6b, 0xce, 0xff, 0x40, 0x8d, 0xf7, 0xcd, 0x8d, 0xab, 0xee, 0xfa, 0xe3, + 0x97, 0x28, 0x26, 0xeb, 0xc8, 0x15, 0x6d, 0x7f, 0xb5, 0x81, 0x1f, 0xfa, + 0x41, 0xa1, 0xff, 0xcc, 0xcb, 0x78, 0xd0, 0x80, 0xec, 0xbf, 0x16, 0xa0, + 0xd5, 0x72, 0x2d, 0xaf, 0x5f, 0xd5, 0xee, 0xdc, 0x1f, 0xbc, 0xb3, 0x75, + 0xbc, 0x38, 0xff, 0x88, 0xf0, 0xe5, 0xc9, 0xf8, 0x51, 0x42, 0xd5, 0x23, + 0xdb, 0x16, 0x72, 0x03, 0x0a, 0x6b, 0xf0, 0xbf, 0x36, 0xaa, 0xdd, 0xc5, + 0xb5, 0xf0, 0x03, 0x6a, 0x3b, 0xfe, 0x84, 0xe0, 0x89, 0xd2, 0x3f, 0x26, + 0xeb, 0x6f, 0x0b, 0x6b, 0x27, 0x45, 0xcd, 0x6b, 0x54, 0xd5, 0xf1, 0x26, + 0xa9, 0x43, 0xe8, 0xb9, 0xb7, 0x5f, 0x7f, 0xfb, 0x5c, 0x70, 0xe7, 0xf5, + 0xb7, 0xee, 0x6b, 0x76, 0x56, 0x7f, 0x6b, 0xf2, 0xda, 0x8d, 0x65, 0x59, + 0x7f, 0x5b, 0x1d, 0x93, 0x91, 0xfe, 0xc0, 0xa4, 0x4b, 0x7f, 0x90, 0xfa, + 0xfa, 0x6f, 0xb9, 0xf2, 0xb7, 0x65, 0x6d, 0x6d, 0xa1, 0xac, 0xb3, 0xca, + 0xda, 0x5a, 0x99, 0xef, 0xed, 0xee, 0x03, 0x23, 0x63, 0x3f, 0xf2, 0x39, + 0x9d, 0x35, 0xb1, 0x1f, 0x59, 0x53, 0x6b, 0x19, 0x8d, 0x6c, 0x38, 0xd1, + 0xe7, 0xa2, 0x8f, 0xba, 0x22, 0x8c, 0xbb, 0xed, 0x0d, 0xfa, 0x21, 0x44, + 0x1a, 0xf4, 0x43, 0x70, 0xf3, 0x7e, 0xb7, 0x8e, 0x05, 0x9d, 0x18, 0xb2, + 0x11, 0xba, 0x30, 0xfa, 0x19, 0x84, 0xe9, 0x74, 0x59, 0xf7, 0xbc, 0x8f, + 0x12, 0x4a, 0xf7, 0x3c, 0xbd, 0xa2, 0xf9, 0xd1, 0x48, 0x0d, 0x3f, 0xf2, + 0xd2, 0x45, 0x6d, 0x95, 0xe7, 0xa3, 0xe9, 0x35, 0xe5, 0xa2, 0xd7, 0x94, + 0x07, 0xbd, 0x8a, 0x67, 0x34, 0x98, 0xf7, 0xf7, 0xd5, 0x35, 0xf8, 0x4f, + 0x84, 0xd0, 0xb3, 0x85, 0x79, 0x6a, 0x50, 0xe9, 0x7f, 0x2e, 0x7a, 0x3d, + 0xc5, 0xf4, 0xaa, 0xcf, 0x63, 0xbe, 0x0d, 0x73, 0x41, 0x95, 0xce, 0x38, + 0xe8, 0x3b, 0x74, 0xf1, 0x1b, 0x22, 0x4f, 0xaa, 0xda, 0x5e, 0xd4, 0xfa, + 0xc4, 0x3e, 0x41, 0x4b, 0xd7, 0xfd, 0xc8, 0x5b, 0xd1, 0xe7, 0x4c, 0xe5, + 0x27, 0xd3, 0xb0, 0x68, 0xae, 0xd2, 0x39, 0x2a, 0xfa, 0x86, 0xc8, 0xf1, + 0x75, 0xcd, 0xed, 0x43, 0x9e, 0x9b, 0x3e, 0xaf, 0x65, 0xe6, 0xb5, 0x2a, + 0x7f, 0xc6, 0xe5, 0xaa, 0x9e, 0x83, 0xf0, 0x1d, 0x75, 0x26, 0x0c, 0x27, + 0x2e, 0x72, 0x4c, 0x7b, 0x1c, 0xf8, 0xc9, 0xa2, 0x4c, 0xfb, 0x3d, 0x09, + 0xe4, 0x33, 0xf7, 0x2c, 0x59, 0x74, 0x3c, 0x73, 0xff, 0x5d, 0x12, 0x57, + 0xce, 0x8a, 0x3e, 0x92, 0xe8, 0x67, 0x16, 0x63, 0xf9, 0x1c, 0xf5, 0x4f, + 0xd3, 0xf9, 0x62, 0x0b, 0x15, 0x58, 0xbb, 0xf7, 0x3b, 0x79, 0xe1, 0xeb, + 0x63, 0x9e, 0x94, 0x45, 0x2f, 0x51, 0x63, 0xb9, 0x99, 0xef, 0xdb, 0x4f, + 0xab, 0xb9, 0x31, 0xd1, 0x13, 0x4a, 0xf6, 0x17, 0xc1, 0x58, 0x1f, 0xf5, + 0x3a, 0x07, 0xfb, 0xa8, 0xed, 0xb3, 0x22, 0xc7, 0xb2, 0x90, 0x3d, 0x2b, + 0x3f, 0xf3, 0x0f, 0xa8, 0x67, 0xf0, 0xf3, 0x8a, 0x7f, 0x4a, 0x91, 0x5e, + 0xcb, 0x65, 0xcb, 0xb9, 0xff, 0xbc, 0xf5, 0x95, 0xa3, 0x3b, 0xd2, 0x57, + 0x52, 0x89, 0x8a, 0xbe, 0xe2, 0xbe, 0x77, 0x39, 0x07, 0xa6, 0x5f, 0xf6, + 0x7b, 0x00, 0x0c, 0xda, 0xa1, 0x8b, 0x25, 0x00, 0x4b, 0x63, 0xc6, 0x0e, + 0x45, 0xfd, 0x53, 0xb4, 0x50, 0x1c, 0x32, 0x92, 0x59, 0xe8, 0xcc, 0xfc, + 0x99, 0x8f, 0xee, 0x91, 0x3e, 0x1a, 0x7d, 0x0d, 0xf8, 0xca, 0x6e, 0x1e, + 0xff, 0x7a, 0xbf, 0xcc, 0xcb, 0x76, 0x9f, 0xef, 0xe2, 0xf3, 0x7b, 0x42, + 0xd5, 0xe7, 0x77, 0xf1, 0xf9, 0xde, 0x04, 0xf6, 0xd0, 0x58, 0x82, 0x5f, + 0xd2, 0xa1, 0x34, 0xef, 0xcd, 0x42, 0x91, 0x65, 0xeb, 0xcb, 0xcc, 0x47, + 0x57, 0xf4, 0xb8, 0x3e, 0xd4, 0xec, 0x88, 0x3d, 0x31, 0x78, 0xcc, 0xb9, + 0xcc, 0x04, 0x8f, 0x1b, 0x24, 0xff, 0xcb, 0x6c, 0x8b, 0xae, 0x68, 0x5c, + 0xd5, 0xf9, 0xf6, 0xdf, 0xe8, 0x93, 0x39, 0x55, 0xdf, 0xdd, 0x23, 0xe1, + 0xe7, 0x08, 0x9e, 0x72, 0x9e, 0xe1, 0xf2, 0xbc, 0xc0, 0x43, 0x7b, 0xda, + 0x2a, 0x3f, 0xbf, 0x13, 0x78, 0xd5, 0x8a, 0xbc, 0xd9, 0xc0, 0x12, 0xf3, + 0xc5, 0x19, 0xc7, 0x4c, 0x97, 0x73, 0xd5, 0x1e, 0x1f, 0x90, 0xd7, 0xbf, + 0xd9, 0x27, 0xfb, 0x83, 0x7e, 0x6b, 0x40, 0xf7, 0x48, 0x94, 0x32, 0x07, + 0xf9, 0xcb, 0x3e, 0x01, 0x1b, 0xff, 0x32, 0xf8, 0xa5, 0xc1, 0xdf, 0x79, + 0x3d, 0x09, 0xcc, 0xf1, 0x4a, 0x9f, 0xee, 0x17, 0x23, 0xd7, 0x15, 0xe7, + 0xf9, 0x46, 0x78, 0x5d, 0xfa, 0xfc, 0x0c, 0x1f, 0x7b, 0xed, 0x2f, 0xee, + 0xd5, 0x96, 0x90, 0xfd, 0xc5, 0xda, 0x12, 0xc9, 0x09, 0xb9, 0xcf, 0x15, + 0x9f, 0x6e, 0xa8, 0xec, 0xd3, 0x3d, 0x9f, 0xb9, 0xd5, 0x07, 0xff, 0x86, + 0xb1, 0xc4, 0xfb, 0x1d, 0x7c, 0x9e, 0xc7, 0xa2, 0x56, 0x21, 0xcd, 0x9f, + 0x1d, 0x2a, 0xaf, 0xa7, 0x1e, 0x57, 0x64, 0x9e, 0x84, 0x96, 0x5b, 0xb8, + 0xf6, 0x43, 0xbe, 0x87, 0x94, 0x5d, 0x8d, 0x9f, 0x43, 0x75, 0x79, 0x30, + 0xf5, 0x38, 0xb6, 0x99, 0x1f, 0x56, 0xc4, 0x13, 0x3d, 0xf0, 0x6c, 0xb3, + 0x7e, 0x06, 0xd7, 0x84, 0x1f, 0x2d, 0x56, 0x47, 0xaf, 0xa0, 0xe3, 0x00, + 0xfd, 0xce, 0x62, 0x8a, 0x76, 0xf1, 0x5e, 0xfd, 0xa6, 0xf1, 0x00, 0xe2, + 0xed, 0x24, 0x73, 0x9e, 0x18, 0xc6, 0x19, 0x67, 0xe2, 0x94, 0x11, 0x01, + 0xbf, 0x2c, 0x05, 0x9c, 0x0e, 0x6a, 0x66, 0x5a, 0xfd, 0x65, 0x1a, 0x65, + 0xfb, 0x0f, 0x34, 0xeb, 0x84, 0xe2, 0x04, 0x7a, 0xb3, 0xcd, 0x43, 0xac, + 0x13, 0xc7, 0x8a, 0xc0, 0x67, 0x83, 0x3e, 0x9f, 0x23, 0xfa, 0x5c, 0x6e, + 0xd4, 0xfc, 0x26, 0x39, 0x56, 0xe5, 0x77, 0xdb, 0x8c, 0xf2, 0x3c, 0xe2, + 0xc5, 0x2f, 0xd3, 0xfb, 0xa2, 0xcf, 0x09, 0xe0, 0xa8, 0xf7, 0xfd, 0x4b, + 0x74, 0x32, 0x81, 0x79, 0x6f, 0x9f, 0x3e, 0x8f, 0xef, 0x88, 0x3e, 0xdb, + 0x3c, 0xe8, 0xf3, 0xc5, 0x7e, 0x89, 0x37, 0x25, 0xc6, 0xd1, 0x36, 0x9a, + 0xcb, 0x22, 0x07, 0xec, 0xd3, 0xe8, 0x3b, 0x95, 0x4d, 0x32, 0x5f, 0x4a, + 0x56, 0xf8, 0xd2, 0x85, 0x28, 0x1b, 0xc3, 0x4c, 0xe3, 0xe8, 0xcb, 0xa6, + 0xf2, 0x7e, 0xb0, 0x8e, 0x01, 0x1a, 0x5d, 0x6e, 0xe7, 0x6b, 0x69, 0x3d, + 0x3a, 0x15, 0x51, 0xb5, 0xfe, 0xb6, 0x15, 0x63, 0xfe, 0x78, 0x9e, 0x69, + 0x39, 0x9d, 0xbd, 0x97, 0x0a, 0xc1, 0x21, 0x1a, 0x59, 0xd6, 0xfd, 0x4d, + 0x44, 0xce, 0xc6, 0xa0, 0xe4, 0x49, 0x7a, 0xdd, 0x9f, 0x10, 0xbe, 0x0b, + 0xeb, 0xd2, 0xc7, 0xb5, 0xee, 0xf6, 0x2d, 0xf8, 0xd2, 0x25, 0x45, 0xb3, + 0xa5, 0xcb, 0xd1, 0x30, 0xa5, 0xa2, 0x53, 0xaf, 0xf4, 0x03, 0xff, 0x47, + 0x2e, 0xc1, 0x0f, 0x07, 0x1e, 0x6d, 0x51, 0x22, 0x53, 0x0b, 0x8b, 0x21, + 0x5e, 0x37, 0x7e, 0x2f, 0x7d, 0x30, 0x17, 0x7e, 0x40, 0xc8, 0xfe, 0xd1, + 0x4b, 0x3c, 0x4e, 0xca, 0x26, 0xc5, 0x37, 0xbc, 0xf0, 0x50, 0xf7, 0xc5, + 0xd4, 0xb8, 0x28, 0x73, 0x3d, 0x59, 0x7f, 0x33, 0x13, 0xfe, 0x5a, 0x9c, + 0xbc, 0xe6, 0x3b, 0xba, 0x68, 0xd1, 0xb1, 0x8c, 0xfd, 0xf5, 0x14, 0x4d, + 0x31, 0x5d, 0xbb, 0xe5, 0x05, 0x8f, 0x27, 0xe0, 0xd9, 0x34, 0xd3, 0x3e, + 0xdb, 0xcd, 0x59, 0x4b, 0xe6, 0xdd, 0x89, 0xde, 0x73, 0x38, 0x46, 0xdd, + 0xf1, 0x5f, 0xf5, 0x6b, 0x79, 0x90, 0xcc, 0xa2, 0x8e, 0x90, 0x3f, 0xf3, + 0x3c, 0x1e, 0xb9, 0xff, 0x39, 0xdc, 0x07, 0xf2, 0x0e, 0x73, 0xe7, 0xe3, + 0x55, 0xb9, 0xaf, 0x23, 0x7c, 0x6f, 0xd4, 0xdd, 0x1f, 0x2b, 0x4e, 0xf2, + 0xfe, 0x76, 0x09, 0xde, 0x2c, 0xf7, 0x73, 0x9a, 0xce, 0x79, 0xf2, 0x15, + 0xb9, 0x2f, 0x49, 0x17, 0x7d, 0x27, 0x05, 0x7d, 0x4f, 0x8b, 0xfd, 0x48, + 0xe6, 0x0c, 0xd6, 0xd7, 0xb4, 0xef, 0x81, 0xed, 0xec, 0x5c, 0x40, 0xe7, + 0x06, 0xf2, 0xf7, 0x0f, 0xfb, 0x45, 0x5e, 0x22, 0xec, 0xef, 0x1c, 0x3e, + 0xa7, 0xe9, 0x79, 0x96, 0xeb, 0x2f, 0x64, 0x5a, 0xe8, 0x6a, 0xb6, 0x85, + 0xde, 0xc9, 0x0e, 0xd1, 0x95, 0xc5, 0x6e, 0x3a, 0xc7, 0x3a, 0xf3, 0x39, + 0x27, 0x60, 0xa5, 0xa9, 0x1b, 0xf1, 0x45, 0xe4, 0x0c, 0x31, 0xdd, 0x61, + 0x3c, 0xf4, 0xbf, 0xe8, 0x5e, 0xc6, 0x39, 0xd6, 0xbd, 0x5b, 0xe9, 0x3d, + 0x7e, 0x66, 0x3a, 0xa3, 0x73, 0x1d, 0xe0, 0x93, 0x1f, 0x2b, 0xeb, 0xaf, + 0x5b, 0xe3, 0x88, 0xb9, 0x05, 0x8e, 0x4c, 0x8b, 0xf8, 0xd6, 0xc2, 0x22, + 0xff, 0xbe, 0x08, 0xff, 0x39, 0xc3, 0x9b, 0xf9, 0xf3, 0x93, 0x01, 0x8c, + 0xc7, 0x39, 0x47, 0xe6, 0x4a, 0x8a, 0xb5, 0x85, 0xf8, 0xd8, 0x27, 0x6a, + 0xa4, 0x25, 0x1c, 0x5a, 0x79, 0x7d, 0x3e, 0x31, 0x3e, 0xb9, 0xda, 0x4a, + 0xf3, 0x39, 0xd6, 0x41, 0x72, 0x7e, 0xb6, 0x61, 0x30, 0xf6, 0xef, 0x54, + 0x6f, 0x61, 0xdc, 0xbf, 0x8b, 0xd2, 0x62, 0x1c, 0x7f, 0xae, 0x76, 0xd1, + 0x42, 0xae, 0x43, 0x1d, 0xdf, 0x2b, 0x72, 0xdc, 0x65, 0x1f, 0x23, 0xfc, + 0xb6, 0x19, 0x7f, 0x7b, 0x97, 0x71, 0x0a, 0x32, 0x55, 0xda, 0xa5, 0xe0, + 0x35, 0x97, 0xeb, 0x7a, 0x22, 0x03, 0xe7, 0xa6, 0xe8, 0x25, 0x96, 0xb7, + 0x23, 0x2f, 0xc3, 0x7f, 0xfc, 0x38, 0xf0, 0x26, 0x9f, 0xa2, 0x41, 0x3e, + 0x46, 0x5f, 0x24, 0xbf, 0xa8, 0x73, 0x8a, 0x05, 0x27, 0x44, 0x6d, 0x88, + 0xa4, 0xd1, 0x59, 0xd1, 0x8b, 0xee, 0x2d, 0xc1, 0x9b, 0xec, 0x94, 0x65, + 0x40, 0x1f, 0x81, 0x0f, 0x46, 0xe6, 0x60, 0x1d, 0x77, 0x7a, 0xde, 0xed, + 0x9b, 0x19, 0xa7, 0x48, 0x3f, 0xf0, 0x5e, 0xd2, 0xac, 0xea, 0x2f, 0x20, + 0xf8, 0xbd, 0xb9, 0x4f, 0xd7, 0x4b, 0xea, 0x63, 0x2d, 0x2b, 0xf4, 0x71, + 0x47, 0xcd, 0xef, 0x66, 0xcd, 0xef, 0xe5, 0x7c, 0x39, 0x96, 0x79, 0x2c, + 0xe7, 0x49, 0xf6, 0x28, 0x4a, 0x2e, 0x4b, 0xfc, 0x33, 0xf7, 0x8d, 0x99, + 0x8f, 0x2a, 0x1d, 0x3c, 0xb9, 0x36, 0x1a, 0xea, 0x31, 0x26, 0x8c, 0xe4, + 0xe4, 0x3f, 0x96, 0x22, 0x09, 0xe8, 0x45, 0x4f, 0xee, 0x51, 0xf9, 0xa7, + 0x3c, 0xaf, 0x54, 0x18, 0xaa, 0xdb, 0xec, 0x5a, 0x07, 0xad, 0x8b, 0x9e, + 0x5c, 0x42, 0xc7, 0xe0, 0xeb, 0x71, 0x9f, 0x94, 0xd9, 0x44, 0xe8, 0x73, + 0x0e, 0x1a, 0xdf, 0x1f, 0xba, 0xc4, 0xfb, 0x19, 0x5f, 0xfb, 0x69, 0xe9, + 0xa4, 0xe8, 0x71, 0x83, 0xb1, 0x5d, 0x34, 0x27, 0x74, 0x7e, 0xd6, 0x5f, + 0xaa, 0xec, 0xaa, 0x29, 0xcc, 0x33, 0x85, 0xd8, 0x8a, 0xe1, 0xfc, 0xbe, + 0x2f, 0x99, 0x97, 0xb1, 0xf2, 0x78, 0x4d, 0xac, 0x7c, 0x56, 0xc4, 0xca, + 0x11, 0x27, 0x07, 0x5c, 0x01, 0x4b, 0xaf, 0x9c, 0x16, 0xec, 0x63, 0x98, + 0x90, 0x1b, 0x7e, 0xee, 0xa2, 0xe0, 0x37, 0xe1, 0x98, 0x5f, 0xe6, 0x57, + 0xc7, 0x79, 0xc6, 0x06, 0x5d, 0x60, 0x7c, 0xb0, 0x27, 0x36, 0x58, 0x97, + 0x58, 0xc9, 0x7e, 0x99, 0xae, 0xe4, 0x9b, 0x58, 0xd7, 0x5b, 0xa0, 0x8d, + 0x3c, 0xb1, 0x4e, 0xd8, 0x4d, 0x0b, 0x61, 0xc6, 0xb1, 0x89, 0x36, 0xde, + 0x4f, 0xd6, 0x6b, 0x27, 0x98, 0xee, 0x78, 0xee, 0x2b, 0xb9, 0xd2, 0x8f, + 0xd2, 0xe1, 0x88, 0x15, 0x9d, 0xea, 0x60, 0xbb, 0xc5, 0xe4, 0x7f, 0x87, + 0xff, 0x77, 0x85, 0x00, 0x93, 0xc2, 0x2a, 0x7e, 0x67, 0x9d, 0x27, 0x53, + 0xfa, 0xd1, 0x1c, 0x8f, 0x99, 0x9b, 0x82, 0xfd, 0x03, 0x3b, 0xcf, 0xe1, + 0x7f, 0x39, 0x66, 0x65, 0x95, 0xf1, 0xfb, 0x62, 0x2a, 0x64, 0x08, 0xde, + 0xbe, 0xce, 0x3c, 0xfe, 0x02, 0xcd, 0xf1, 0x1c, 0xae, 0x10, 0xae, 0xb5, + 0x28, 0x19, 0xde, 0xc7, 0x78, 0xdf, 0xcd, 0x9f, 0xa8, 0xbf, 0x6a, 0xa7, + 0x85, 0xc9, 0x31, 0x55, 0x7f, 0xf5, 0xbd, 0x06, 0xf5, 0x57, 0xb8, 0x8e, + 0xe5, 0xfe, 0x62, 0xe9, 0xe6, 0x5c, 0xd8, 0xfd, 0x3c, 0x32, 0x92, 0xe1, + 0x4e, 0xa1, 0x23, 0xad, 0xac, 0xfa, 0xf8, 0xd9, 0x11, 0x2b, 0x39, 0xc5, + 0x73, 0xcc, 0xb9, 0xe7, 0x5d, 0xba, 0x19, 0x0b, 0x63, 0x9c, 0xbf, 0x66, + 0x1c, 0xdb, 0xca, 0x53, 0x72, 0x3d, 0x85, 0x5c, 0xe9, 0xe7, 0xd1, 0xb0, + 0x5e, 0x9f, 0xfb, 0x5a, 0xac, 0x03, 0xf4, 0xc4, 0x9f, 0x2b, 0x5d, 0xbe, + 0x2b, 0x59, 0xd8, 0xdf, 0x06, 0xe3, 0x39, 0x66, 0x34, 0x44, 0xa9, 0x15, + 0xa6, 0xef, 0x8b, 0x1d, 0xbe, 0x8d, 0xec, 0x95, 0x52, 0xb2, 0x2a, 0x97, + 0xa5, 0xda, 0xef, 0x2e, 0x6d, 0xae, 0x21, 0x72, 0x96, 0x20, 0x33, 0x21, + 0x2f, 0x53, 0x25, 0xbf, 0x03, 0xfd, 0x0e, 0xb6, 0xd0, 0x59, 0xe6, 0x57, + 0x32, 0x1f, 0x89, 0x79, 0x27, 0xf3, 0x2c, 0x49, 0x2f, 0xf1, 0xaa, 0xd7, + 0x0d, 0x48, 0x9c, 0x1d, 0xa9, 0xe4, 0x41, 0xba, 0xe2, 0xe9, 0x01, 0x57, + 0x3c, 0xdd, 0x74, 0xe5, 0x41, 0x06, 0x85, 0x3e, 0x56, 0xd1, 0xa1, 0x82, + 0x4a, 0x87, 0x82, 0xae, 0x25, 0x79, 0x59, 0xa1, 0xcc, 0xcb, 0x76, 0x6f, + 0xc1, 0xcb, 0xbc, 0x6c, 0xd3, 0x75, 0xc5, 0x37, 0xec, 0x30, 0xe4, 0xfc, + 0xe5, 0xe2, 0x34, 0xbd, 0xcd, 0x3c, 0xe2, 0xad, 0x62, 0x98, 0xf9, 0xc6, + 0x24, 0xf3, 0x8d, 0x09, 0xe6, 0x1b, 0x0e, 0xc3, 0xc0, 0xe2, 0xb5, 0x5f, + 0xf3, 0x5d, 0x59, 0x84, 0xbc, 0x98, 0xa2, 0xe7, 0x8b, 0xe0, 0xc1, 0x93, + 0xac, 0xf3, 0x5c, 0xf3, 0x6d, 0x2c, 0x76, 0x31, 0xbe, 0x4a, 0x3d, 0xa7, + 0xda, 0x8e, 0x41, 0xaf, 0x15, 0xf8, 0x87, 0xaf, 0x82, 0xcf, 0xbc, 0x91, + 0xa2, 0x4e, 0x86, 0x3d, 0xe0, 0xbc, 0x8e, 0xde, 0x14, 0xaf, 0x81, 0x96, + 0xd1, 0x13, 0xf8, 0xbb, 0xe3, 0x53, 0x3c, 0xf7, 0x4e, 0xdf, 0x02, 0xef, + 0xcb, 0xd3, 0xe1, 0x94, 0xd9, 0xcb, 0x38, 0x7f, 0xac, 0x82, 0xf3, 0xa9, + 0x34, 0xaf, 0xa0, 0x67, 0xb9, 0x9b, 0xc6, 0x0e, 0x44, 0xf7, 0xf6, 0x30, + 0x9d, 0x22, 0x37, 0xa2, 0xd2, 0xa7, 0xc7, 0x4f, 0x27, 0x83, 0x6d, 0xaa, + 0xbf, 0x8f, 0xc5, 0xf2, 0xf1, 0x03, 0xbe, 0xcf, 0x2d, 0x5f, 0x3a, 0xfb, + 0x2a, 0x3f, 0x03, 0xc7, 0x5f, 0x85, 0xff, 0x93, 0xed, 0x83, 0x56, 0xe1, + 0x3f, 0x2a, 0x88, 0xb1, 0x38, 0xb6, 0x27, 0x98, 0x97, 0x85, 0xd7, 0x0d, + 0x7b, 0x3a, 0x62, 0x30, 0xd1, 0x75, 0x99, 0xbc, 0xde, 0xd2, 0xa0, 0x8c, + 0xc1, 0xed, 0xdd, 0x2b, 0xf9, 0x06, 0xe3, 0x66, 0x30, 0x22, 0x6c, 0xb4, + 0xa6, 0x25, 0x29, 0x27, 0x0b, 0xbc, 0xcf, 0x2b, 0xe1, 0x09, 0xde, 0xe7, + 0x0e, 0x25, 0x23, 0x53, 0xfc, 0xbb, 0x90, 0xbf, 0x2c, 0x2b, 0x87, 0xd0, + 0xb3, 0xda, 0x14, 0xfd, 0x20, 0x66, 0xd1, 0x6f, 0xa7, 0x83, 0xef, 0x6b, + 0x33, 0xd6, 0x82, 0x4f, 0x7c, 0xe0, 0x4b, 0x66, 0xf1, 0x5c, 0xe0, 0x21, + 0x7f, 0xcf, 0x4f, 0xd1, 0x85, 0x8c, 0x9e, 0xc3, 0x80, 0x61, 0xbc, 0x84, + 0x79, 0xf8, 0x68, 0xb7, 0xf3, 0x43, 0x86, 0x17, 0x1f, 0xff, 0x71, 0xed, + 0x9c, 0x86, 0xd5, 0x9c, 0xd0, 0xd3, 0xb2, 0x05, 0x3d, 0x7c, 0x08, 0xbd, + 0x8f, 0x0a, 0xa2, 0xe7, 0x64, 0xb3, 0xb0, 0x4d, 0x0b, 0xc2, 0xc6, 0x28, + 0x85, 0x2a, 0x7d, 0x30, 0xef, 0xa9, 0x39, 0xf7, 0x13, 0x5f, 0x7a, 0xf1, + 0xa0, 0xd0, 0xc5, 0x46, 0x0e, 0xec, 0x55, 0xf5, 0xa7, 0x5d, 0xe2, 0xbe, + 0xc6, 0x32, 0x7e, 0x7b, 0x50, 0xfd, 0xf6, 0x49, 0xa1, 0x03, 0x23, 0x2f, + 0x2e, 0xb0, 0x24, 0xf0, 0x9c, 0xf7, 0xd7, 0x99, 0x60, 0x3c, 0x0f, 0xad, + 0xc0, 0x77, 0x2f, 0xe0, 0xa9, 0xe1, 0x01, 0x58, 0x00, 0xf7, 0x3b, 0x14, + 0xde, 0xdb, 0x56, 0xdc, 0xaf, 0xd7, 0xdd, 0x08, 0xce, 0xac, 0xd3, 0x64, + 0xb0, 0x56, 0xac, 0x69, 0x8f, 0x2f, 0x92, 0xb7, 0x8c, 0xf4, 0x22, 0x6c, + 0x1a, 0xd4, 0xb5, 0xdc, 0x85, 0xbc, 0x29, 0x9e, 0xc3, 0x1e, 0x8a, 0x24, + 0x30, 0x2f, 0x8c, 0xd3, 0x30, 0xf8, 0xb7, 0x1a, 0x58, 0xb8, 0xaf, 0xeb, + 0x56, 0xd7, 0xb5, 0x8a, 0xbd, 0x20, 0x03, 0xcf, 0xd1, 0xcf, 0xc6, 0x73, + 0xf1, 0x7c, 0x5c, 0x87, 0xfb, 0xc9, 0xfb, 0xf6, 0x31, 0x7f, 0x8e, 0x4e, + 0xc9, 0x7b, 0x19, 0x97, 0xe4, 0x6f, 0x7d, 0x8e, 0xf7, 0x7c, 0xe5, 0xfe, + 0xf9, 0x54, 0xbf, 0x1e, 0xec, 0x5f, 0x37, 0xe5, 0x85, 0x8f, 0x13, 0xbf, + 0x75, 0x8a, 0xdf, 0xa2, 0x4e, 0xa7, 0xd8, 0xd7, 0xf3, 0x7c, 0x3c, 0x9f, + 0xed, 0xf2, 0xc1, 0x36, 0x4f, 0x27, 0x3a, 0x7d, 0xf9, 0x3c, 0xd6, 0xdb, + 0xe9, 0x8b, 0x33, 0xee, 0xc7, 0xb2, 0xf1, 0xd2, 0x82, 0xe0, 0x31, 0xac, + 0xd3, 0xf6, 0xda, 0xe6, 0x49, 0xe3, 0x4f, 0x86, 0x64, 0x6f, 0x5b, 0x7c, + 0x67, 0xfa, 0xcb, 0x30, 0xfd, 0x65, 0x98, 0xfe, 0x32, 0x4c, 0x7f, 0x19, + 0xa6, 0x3f, 0xb6, 0x4b, 0xdf, 0x64, 0x99, 0xf1, 0x6d, 0x96, 0x19, 0x92, + 0x66, 0x23, 0xca, 0x8f, 0xa9, 0x69, 0xb6, 0xb6, 0x3e, 0x53, 0xd3, 0x28, + 0xe4, 0x34, 0xf9, 0x0e, 0x8f, 0x57, 0xd3, 0xea, 0x55, 0xa6, 0xd5, 0xa6, + 0x99, 0x7e, 0xba, 0x91, 0xc3, 0x9e, 0xd9, 0xd6, 0x79, 0xe6, 0xd1, 0x71, + 0x3f, 0x74, 0xaa, 0x00, 0xd3, 0x13, 0x74, 0x4a, 0x9b, 0xe1, 0xde, 0x4f, + 0x37, 0x99, 0x4f, 0xdf, 0xc8, 0x81, 0x76, 0xef, 0x52, 0xc7, 0x19, 0xa6, + 0x5d, 0xc8, 0xb9, 0x25, 0xdf, 0xd5, 0xac, 0xc1, 0xba, 0x57, 0xc0, 0x4c, + 0x12, 0xf8, 0xa8, 0xd0, 0xc7, 0x78, 0xdf, 0xd7, 0x99, 0xdf, 0xc3, 0x57, + 0x87, 0xbe, 0x5f, 0x79, 0x1f, 0xcb, 0x89, 0xd0, 0x15, 0xe6, 0xa3, 0xa7, + 0x73, 0x4b, 0x4c, 0xef, 0xbd, 0xf4, 0x85, 0x1c, 0xe4, 0x31, 0x60, 0xc4, + 0xc7, 0x79, 0x12, 0x3e, 0x30, 0x63, 0x06, 0x6b, 0x1f, 0x4b, 0x19, 0x02, + 0x4f, 0x9e, 0x01, 0x1c, 0x18, 0xf6, 0x67, 0xf6, 0xa2, 0x67, 0x7d, 0xc4, + 0x68, 0x56, 0x3e, 0x45, 0x7c, 0xc7, 0x78, 0x8c, 0x05, 0xdc, 0x70, 0xdc, + 0x28, 0xfe, 0x88, 0xf7, 0x42, 0x84, 0x19, 0x1e, 0xb5, 0x7c, 0xeb, 0x02, + 0x7a, 0x91, 0x02, 0x5e, 0xd3, 0x51, 0x3f, 0x6a, 0xc5, 0xe9, 0x39, 0xbc, + 0xff, 0xe0, 0x85, 0x22, 0xe6, 0xbd, 0x48, 0x0b, 0x41, 0xf0, 0x21, 0x3b, + 0x7c, 0x9d, 0x24, 0xec, 0x5a, 0x59, 0xbf, 0xfc, 0xbc, 0x37, 0x6f, 0xb3, + 0xa2, 0x42, 0x1f, 0x6e, 0x61, 0xfb, 0x06, 0xb0, 0x79, 0x8b, 0x71, 0x2d, + 0x0c, 0x9b, 0x5f, 0xf1, 0xb5, 0x37, 0x99, 0xe7, 0x60, 0xcf, 0x3a, 0x85, + 0x8c, 0xf1, 0xe2, 0x65, 0x1b, 0x8a, 0x97, 0x39, 0x2e, 0x5e, 0x96, 0x2e, + 0xf3, 0x32, 0xc6, 0x09, 0xc1, 0xc3, 0xc0, 0xa3, 0x66, 0x59, 0x4f, 0x94, + 0xdf, 0xa1, 0xff, 0xed, 0x16, 0x3c, 0x8b, 0x79, 0x3d, 0xdb, 0x0d, 0x85, + 0x62, 0xca, 0x77, 0x48, 0xf0, 0x0e, 0x8d, 0xd7, 0xff, 0xa3, 0xe8, 0xa1, + 0x55, 0xf0, 0x81, 0xf4, 0x2c, 0xf8, 0x95, 0xd7, 0xf8, 0xff, 0x02, 0x6c, + 0x79, 0xbc, 0x13, 0x7a, 0x8d, 0xf9, 0x58, 0x21, 0x0c, 0x9b, 0xb5, 0x43, + 0xd9, 0x36, 0xe8, 0xbb, 0xb5, 0x07, 0xb9, 0x96, 0x56, 0xb4, 0xcc, 0xc7, + 0x76, 0x2b, 0xbf, 0x05, 0xfc, 0x8c, 0xd8, 0xeb, 0x3a, 0x5d, 0xc0, 0x82, + 0x2e, 0xc0, 0x63, 0x03, 0x0c, 0x1f, 0xd1, 0x1b, 0x9c, 0xe8, 0x16, 0xc3, + 0x01, 0xfb, 0x7c, 0x0b, 0xfb, 0xcc, 0xba, 0x2c, 0x05, 0xe6, 0xa6, 0x02, + 0x03, 0x98, 0xdf, 0xc2, 0x6a, 0x85, 0x1f, 0x9e, 0xcf, 0x0c, 0x18, 0x85, + 0xac, 0x9c, 0xe3, 0xca, 0xb8, 0xe4, 0x79, 0x85, 0x3c, 0x7a, 0x7b, 0x89, + 0xb9, 0xf2, 0x1c, 0xf5, 0xfa, 0x04, 0xff, 0x52, 0x74, 0xbf, 0x1d, 0x5a, + 0x4b, 0x30, 0x5d, 0x61, 0x4f, 0x52, 0x2e, 0x9c, 0x79, 0x94, 0x9f, 0x8f, + 0x73, 0x8d, 0xd7, 0x71, 0xb3, 0xbc, 0x8e, 0x08, 0xaf, 0x03, 0x63, 0x6f, + 0xf9, 0x6e, 0xa8, 0x75, 0xdc, 0x28, 0xaf, 0x63, 0x56, 0xad, 0x83, 0xd2, + 0xc6, 0xcc, 0x6e, 0xa5, 0xc7, 0x6f, 0x79, 0xcf, 0xd6, 0x28, 0xeb, 0x27, + 0xe9, 0x55, 0xc0, 0xf3, 0x1e, 0x85, 0x2f, 0x6e, 0x7f, 0xa8, 0x7b, 0x6e, + 0xf6, 0xc4, 0x75, 0xfa, 0x5d, 0xba, 0x29, 0xf4, 0x93, 0x61, 0xd6, 0x4f, + 0x70, 0x9e, 0x16, 0xc0, 0x87, 0xd3, 0x41, 0xf4, 0x9b, 0x1d, 0x64, 0x98, + 0xb1, 0x5d, 0x35, 0xc5, 0x9f, 0xc2, 0x4f, 0x86, 0xfb, 0xe8, 0xeb, 0xbf, + 0x48, 0x37, 0x17, 0xc1, 0xab, 0xa1, 0x8f, 0xca, 0x9e, 0xb4, 0x37, 0xd7, + 0xa4, 0x9f, 0x36, 0xee, 0xe9, 0xa7, 0x85, 0x8f, 0x36, 0x0c, 0x7d, 0xdd, + 0x84, 0x3f, 0x37, 0x26, 0xde, 0x67, 0xc1, 0xc7, 0x45, 0xdc, 0xcb, 0x8b, + 0xef, 0x4c, 0xbb, 0x72, 0xdc, 0x90, 0x73, 0x92, 0x62, 0x3e, 0xe2, 0x98, + 0x4d, 0x86, 0xac, 0x9d, 0xb9, 0x5c, 0xd4, 0x3a, 0x51, 0x9c, 0xf7, 0xc8, + 0x09, 0x1b, 0x46, 0x44, 0xf8, 0x0c, 0x5a, 0x9d, 0x0e, 0x6a, 0x61, 0x39, + 0x79, 0x8a, 0xd0, 0x13, 0xcd, 0xb6, 0xe0, 0xcb, 0xbf, 0xc0, 0xb8, 0xb7, + 0x10, 0xb6, 0x43, 0x9f, 0x13, 0xf6, 0x25, 0xe4, 0x07, 0xde, 0xa7, 0x02, + 0x18, 0x63, 0x0e, 0xfc, 0x7d, 0x15, 0xfd, 0x30, 0xc3, 0xbc, 0x7e, 0xf8, + 0x81, 0x47, 0xad, 0x77, 0x58, 0xee, 0x5c, 0x10, 0xfe, 0x95, 0xb3, 0x94, + 0x66, 0x3a, 0x3c, 0x2c, 0xe8, 0xd0, 0x18, 0x66, 0x6a, 0x61, 0xfa, 0x41, + 0x8e, 0xc1, 0x98, 0xe8, 0xbf, 0x23, 0x6d, 0x16, 0x5e, 0xe5, 0x9a, 0xea, + 0x6b, 0x90, 0x00, 0x6f, 0xd8, 0xbe, 0x6f, 0x21, 0xf1, 0x91, 0x7d, 0x2a, + 0x6e, 0x5d, 0xab, 0xd6, 0x87, 0x0d, 0xfb, 0xcc, 0x12, 0x7d, 0x1f, 0x01, + 0x3b, 0xe1, 0x17, 0x34, 0x26, 0x19, 0x6e, 0xfa, 0xdd, 0x35, 0x6e, 0xfb, + 0xff, 0x29, 0x51, 0x9f, 0xff, 0x46, 0x51, 0xca, 0xd8, 0x34, 0xdb, 0xe6, + 0x0b, 0x07, 0xdc, 0x3a, 0x87, 0x9d, 0x8d, 0x09, 0x9f, 0xcc, 0x00, 0x45, + 0x97, 0x27, 0xe9, 0xb1, 0x0c, 0x78, 0x14, 0x5d, 0x8f, 0x3a, 0x78, 0xc3, + 0x06, 0x68, 0x79, 0x92, 0xe2, 0x45, 0xc0, 0xc8, 0x47, 0x0b, 0x2c, 0x05, + 0xd2, 0x59, 0xc4, 0xee, 0xf9, 0x7b, 0x1e, 0xef, 0x57, 0xf9, 0x15, 0xe5, + 0xf7, 0x1e, 0xa2, 0xd8, 0x32, 0xa5, 0x92, 0xe1, 0x87, 0x45, 0xcf, 0xea, + 0x64, 0x78, 0x5c, 0xf9, 0x68, 0x42, 0x7c, 0x1e, 0x7e, 0x2f, 0x8b, 0x1e, + 0xcd, 0xd8, 0xa9, 0x24, 0x49, 0xdf, 0x03, 0xf1, 0x1c, 0x0c, 0x96, 0xad, + 0xbb, 0x99, 0x57, 0x1c, 0x17, 0xfe, 0x07, 0xd6, 0x44, 0x16, 0x31, 0x1e, + 0xbe, 0x83, 0x5e, 0x82, 0xbd, 0x95, 0xcc, 0x3e, 0xa0, 0xc6, 0x96, 0xc8, + 0x64, 0x5c, 0x30, 0x7f, 0xc9, 0x49, 0x85, 0x8d, 0xca, 0xf5, 0xf0, 0x5d, + 0x1c, 0x17, 0xfa, 0xe1, 0x30, 0xdb, 0x30, 0x62, 0x5c, 0x69, 0x4e, 0xf8, + 0x21, 0xf8, 0x38, 0xff, 0xd3, 0x01, 0xfd, 0x6e, 0x03, 0x9c, 0x97, 0xfe, + 0x09, 0xbe, 0x67, 0x9e, 0xe7, 0x51, 0x95, 0x17, 0x3f, 0x44, 0x91, 0x1d, + 0xf8, 0x8b, 0x66, 0xef, 0xa8, 0xbf, 0x88, 0x61, 0xcd, 0xb2, 0xe5, 0x32, + 0xd3, 0xc6, 0xdb, 0x5b, 0xda, 0x71, 0xef, 0x6b, 0x19, 0xcd, 0xb0, 0x32, + 0xc5, 0xfb, 0x2f, 0xd0, 0xeb, 0x73, 0xa1, 0xf8, 0x29, 0xbc, 0x47, 0xc6, + 0x97, 0x10, 0x3a, 0x6f, 0x88, 0x75, 0x17, 0xe8, 0x30, 0xa3, 0x22, 0xbe, + 0x15, 0x79, 0xc2, 0x32, 0x16, 0xd6, 0xfa, 0xc9, 0x0f, 0xbf, 0x9a, 0xa3, + 0x73, 0x22, 0x5a, 0x45, 0xfe, 0xba, 0x8c, 0x2b, 0x42, 0xfe, 0x82, 0x07, + 0xfe, 0xc4, 0x97, 0x5c, 0xf3, 0xf7, 0xe9, 0x7c, 0xb7, 0x48, 0xb0, 0x9c, + 0x4f, 0xa3, 0x78, 0x8a, 0xc6, 0x3d, 0x1d, 0xb3, 0x70, 0xbf, 0xd7, 0x0a, + 0xb4, 0xeb, 0xd6, 0x19, 0xe0, 0x67, 0x12, 0x7b, 0x74, 0x01, 0x71, 0x5c, + 0xa3, 0x2a, 0x1e, 0xd1, 0xc2, 0xfb, 0x04, 0x3b, 0x0f, 0xfe, 0xbb, 0xcf, + 0xf2, 0x27, 0xe2, 0x0a, 0x27, 0x07, 0xa1, 0x27, 0xf5, 0x38, 0x8c, 0x33, + 0x53, 0x38, 0xee, 0x67, 0xbb, 0x4b, 0xeb, 0xb5, 0xd2, 0xa7, 0xc4, 0xb6, + 0x98, 0xda, 0x2f, 0xf8, 0x93, 0x46, 0x54, 0xbf, 0x01, 0x9b, 0xac, 0x5e, + 0xc0, 0xe9, 0xe3, 0xa2, 0xc7, 0xad, 0x62, 0x10, 0xdb, 0xc9, 0x59, 0xc2, + 0x3b, 0xb7, 0xd0, 0x77, 0xf3, 0x6e, 0xc0, 0x9e, 0xf7, 0xc8, 0x1d, 0xa3, + 0xf8, 0x94, 0x7a, 0xff, 0xcf, 0x9d, 0xda, 0xb7, 0x5d, 0x1e, 0xfb, 0xf6, + 0xbd, 0x41, 0x19, 0x03, 0xbb, 0x4b, 0x8d, 0xf1, 0xca, 0x53, 0xfd, 0xfb, + 0xa7, 0xe1, 0x4f, 0xaa, 0xd4, 0x51, 0x5c, 0x13, 0x7c, 0xa5, 0xde, 0xa7, + 0x1d, 0x62, 0x7e, 0x2a, 0xe9, 0xf8, 0xb8, 0x07, 0x1d, 0xf7, 0xce, 0x40, + 0x2f, 0xb9, 0x7d, 0x3a, 0x3e, 0xd6, 0x90, 0x8e, 0xff, 0x75, 0x50, 0xfa, + 0x54, 0xeb, 0xe9, 0x18, 0xb5, 0x3c, 0xc7, 0x8b, 0x8d, 0xfc, 0x57, 0xd8, + 0x07, 0xd4, 0xa4, 0xc3, 0xe7, 0x01, 0x58, 0x69, 0xbf, 0x07, 0xe2, 0x7e, + 0xc0, 0x47, 0xc4, 0x4e, 0xfe, 0x90, 0xe2, 0x8b, 0xb5, 0xb1, 0xd0, 0xcd, + 0xae, 0xf9, 0x96, 0xc7, 0x35, 0xd0, 0xc5, 0x41, 0x0b, 0x76, 0x48, 0xda, + 0xf4, 0x1a, 0x5e, 0xef, 0xf9, 0x0e, 0xe5, 0xec, 0x54, 0x9e, 0xe0, 0xa3, + 0x0e, 0xd2, 0x53, 0x88, 0x2b, 0x2b, 0x1f, 0xf0, 0xd1, 0x8c, 0x5c, 0xb7, + 0x79, 0x40, 0xe0, 0x03, 0xf4, 0xd5, 0x50, 0xc2, 0x9f, 0xe0, 0x3d, 0x95, + 0xfe, 0xdf, 0xe4, 0x6a, 0x48, 0xed, 0x13, 0x8f, 0xc5, 0xfd, 0x3c, 0xeb, + 0xfc, 0xb0, 0x3f, 0xf6, 0xd7, 0xd7, 0xcb, 0x79, 0xc5, 0x90, 0x05, 0x25, + 0xfa, 0x0f, 0x96, 0x73, 0xfe, 0x03, 0xa6, 0xe8, 0xb9, 0x70, 0xb9, 0x78, + 0x80, 0xf5, 0x47, 0xec, 0x21, 0x7c, 0x87, 0xda, 0xb7, 0xfb, 0xf6, 0x30, + 0x75, 0xed, 0x67, 0xa9, 0x6f, 0x90, 0xc3, 0x7a, 0xa3, 0x71, 0x00, 0xf9, + 0xe1, 0x16, 0x5f, 0x83, 0x5e, 0x51, 0x63, 0x56, 0x9c, 0x3a, 0xe0, 0x4f, + 0x40, 0x0f, 0x68, 0x2b, 0x5d, 0x45, 0x53, 0xb3, 0x82, 0xa6, 0xe2, 0x6b, + 0xb3, 0x8a, 0xa6, 0x66, 0x95, 0xff, 0x7c, 0x56, 0xd1, 0xd4, 0xac, 0xa2, + 0xa9, 0x59, 0x45, 0x53, 0xb3, 0x8c, 0xd7, 0xa3, 0xac, 0xaf, 0x42, 0xf7, + 0xd0, 0xfe, 0xcb, 0x2e, 0x4a, 0xe6, 0x70, 0x1e, 0xf2, 0xb8, 0x96, 0xae, + 0x7e, 0x6d, 0x58, 0xfb, 0x47, 0x0b, 0x32, 0xcf, 0x8e, 0x9f, 0x85, 0x3d, + 0x78, 0x98, 0xe1, 0x77, 0xcd, 0x37, 0xbf, 0x88, 0xb9, 0xfa, 0x28, 0x26, + 0x7a, 0xc0, 0x36, 0x51, 0xd4, 0xad, 0xe3, 0x9a, 0xa8, 0xeb, 0x92, 0xb6, + 0x5c, 0xaa, 0x61, 0x8d, 0x97, 0xc6, 0x8b, 0x69, 0xb5, 0x5f, 0xb5, 0x76, + 0x4e, 0x0b, 0x25, 0xb2, 0x80, 0x2b, 0x72, 0x21, 0x2d, 0xde, 0x1b, 0x01, + 0xa7, 0x94, 0xe9, 0x01, 0x83, 0xa3, 0x0a, 0x06, 0x4f, 0x8b, 0x35, 0x22, + 0x97, 0x10, 0x3e, 0xc8, 0xc6, 0x70, 0x48, 0x67, 0x46, 0xf9, 0x3e, 0x8c, + 0xfb, 0x07, 0x42, 0xcc, 0x83, 0xb6, 0x0b, 0x07, 0xf7, 0xda, 0x1b, 0xf1, + 0x9a, 0xed, 0xd6, 0xd3, 0x5c, 0x77, 0xc9, 0x8e, 0x90, 0x92, 0x1b, 0x52, + 0xef, 0xdd, 0xe5, 0xd8, 0x89, 0x14, 0xcf, 0xed, 0x2f, 0xc2, 0x7f, 0x39, + 0x44, 0x6d, 0x25, 0x3a, 0x12, 0x06, 0x3e, 0x77, 0xb1, 0x5d, 0xc9, 0x73, + 0x18, 0x2b, 0xd1, 0x85, 0xf0, 0x3e, 0xb6, 0x5d, 0xf6, 0xb3, 0x0e, 0x3a, + 0xca, 0xff, 0x4e, 0xc4, 0xef, 0xc3, 0xbc, 0x3a, 0xf8, 0xda, 0x7e, 0x32, + 0x7a, 0x52, 0x66, 0x2b, 0xeb, 0x07, 0x47, 0x2a, 0xf6, 0x88, 0x05, 0xff, + 0x1c, 0xeb, 0xb6, 0xc6, 0x5c, 0xb8, 0x5b, 0xd5, 0x9c, 0xc1, 0x87, 0x8d, + 0xf8, 0xd6, 0x3f, 0x97, 0x64, 0xaf, 0x80, 0x21, 0x75, 0xfc, 0xe3, 0x52, + 0x64, 0x08, 0xc7, 0x78, 0xe7, 0x90, 0x3d, 0x11, 0xf1, 0xfd, 0x58, 0xea, + 0xf2, 0x3e, 0xfb, 0x88, 0x7c, 0x3f, 0x80, 0x6d, 0x5a, 0x3e, 0x2f, 0xbc, + 0x97, 0x3a, 0x4f, 0x25, 0x5f, 0x15, 0x74, 0x50, 0xa2, 0x7f, 0x67, 0x9a, + 0x35, 0x09, 0xb1, 0x8c, 0x29, 0x51, 0x0b, 0x8d, 0x7c, 0xe5, 0xf9, 0x45, + 0x3d, 0x2f, 0x47, 0xed, 0xf5, 0xfd, 0xc8, 0x37, 0xcb, 0x16, 0x68, 0x73, + 0x99, 0x01, 0x3f, 0xda, 0xe8, 0xf2, 0x46, 0x4f, 0x50, 0xd4, 0x66, 0x77, + 0xb3, 0x8e, 0xa3, 0xf3, 0x92, 0xc7, 0xf8, 0xfe, 0x01, 0xf1, 0xbe, 0xb9, + 0xd8, 0x12, 0xc6, 0x35, 0xd3, 0xc8, 0x72, 0xe9, 0x21, 0xfe, 0x5d, 0xc4, + 0x11, 0x93, 0xd4, 0xaa, 0x62, 0x04, 0x1d, 0x2a, 0xae, 0x14, 0x62, 0x5a, + 0xaa, 0xd4, 0x1c, 0x8f, 0x94, 0x7d, 0x6d, 0xc0, 0xf1, 0x5a, 0x5f, 0xdb, + 0x73, 0x5b, 0xc8, 0x9b, 0xad, 0xf0, 0x1a, 0x39, 0xa5, 0x2d, 0xa4, 0x7c, + 0x88, 0xd6, 0x02, 0x6d, 0xb7, 0xb6, 0x6e, 0xc7, 0xd7, 0xb4, 0x36, 0xcf, + 0xac, 0x9f, 0x79, 0xc7, 0x69, 0x53, 0xf8, 0xd4, 0x4c, 0xf3, 0xb9, 0x36, + 0x96, 0xd9, 0xa8, 0x97, 0x02, 0xbc, 0xfc, 0x43, 0xa8, 0x37, 0x79, 0x32, + 0xd0, 0x4c, 0xab, 0xab, 0xc8, 0x79, 0x78, 0xfc, 0x2e, 0x99, 0xe7, 0xfb, + 0x08, 0xc3, 0x65, 0x3f, 0xcb, 0x37, 0x43, 0xc5, 0x70, 0x70, 0x0e, 0xbc, + 0x41, 0xf4, 0xfd, 0x0c, 0x3c, 0x3c, 0xde, 0xc6, 0x7a, 0xbd, 0x8c, 0x01, + 0x1c, 0xe4, 0x7b, 0x7f, 0x33, 0xf7, 0x08, 0xfc, 0x59, 0xe6, 0x61, 0xbe, + 0x7f, 0x8c, 0xf5, 0x81, 0x08, 0x35, 0xd3, 0xca, 0x6a, 0x33, 0xeb, 0xf5, + 0xcd, 0xac, 0x0f, 0x8c, 0x9a, 0x23, 0x3e, 0xf1, 0x2c, 0x51, 0xdb, 0xf2, + 0xe9, 0xc0, 0x7e, 0xc6, 0x41, 0x3c, 0xeb, 0x8b, 0xea, 0x59, 0xb5, 0xcf, + 0xb8, 0x55, 0xc2, 0xf1, 0x61, 0xff, 0xfa, 0x99, 0xab, 0x78, 0x2f, 0xd4, + 0xe2, 0x34, 0xeb, 0xbe, 0x41, 0xf1, 0x6e, 0x46, 0x63, 0x66, 0x86, 0xed, + 0x80, 0x30, 0x1f, 0x1f, 0xa1, 0x54, 0x31, 0x41, 0xbf, 0x57, 0x74, 0xfb, + 0x6a, 0x8f, 0xf0, 0x9c, 0x65, 0x6d, 0x7d, 0x0b, 0xcf, 0xeb, 0x7d, 0xa7, + 0x96, 0x67, 0xb4, 0x91, 0xff, 0x6b, 0x41, 0x6a, 0x7e, 0x11, 0xbe, 0x91, + 0x12, 0x65, 0xc3, 0xf6, 0x85, 0xeb, 0xe2, 0xbd, 0x1b, 0x16, 0xbd, 0x22, + 0xf2, 0x5b, 0xf9, 0x7a, 0xbe, 0xe7, 0x79, 0x8c, 0x7b, 0xc5, 0xa2, 0x2b, + 0x8e, 0x84, 0xf7, 0x9f, 0x05, 0x82, 0xe4, 0x7f, 0x1d, 0x39, 0x48, 0xd0, + 0xb5, 0xd6, 0xcf, 0x38, 0xfb, 0x98, 0x5f, 0xbf, 0x88, 0xeb, 0xf8, 0xf3, + 0x75, 0x1c, 0xb7, 0xf1, 0x3a, 0x21, 0x6f, 0x91, 0x77, 0x02, 0x3e, 0xb7, + 0x3f, 0x64, 0x0a, 0xfc, 0x3b, 0xc2, 0x38, 0xd5, 0x24, 0x7c, 0x81, 0xbd, + 0x18, 0xeb, 0x0c, 0xb2, 0x6e, 0xb0, 0x7e, 0x66, 0x7c, 0x1f, 0x8e, 0x23, + 0x3d, 0x7e, 0x86, 0x91, 0xc4, 0xa1, 0xb0, 0x78, 0xff, 0xa1, 0xeb, 0x2f, + 0x70, 0x70, 0x9c, 0x78, 0x3f, 0xa1, 0x3f, 0xf0, 0x7e, 0x9a, 0xe8, 0xb3, + 0xd4, 0x46, 0x71, 0x7e, 0x46, 0x2c, 0x27, 0xd7, 0x7d, 0xbe, 0xe8, 0x27, + 0xe9, 0x47, 0x6a, 0x1e, 0xd6, 0xef, 0x29, 0xa4, 0x7e, 0xdc, 0x5b, 0xd3, + 0x0a, 0xbe, 0x77, 0xd1, 0x8d, 0x5c, 0x07, 0xdd, 0x54, 0xb1, 0xa5, 0x1b, + 0xc2, 0xae, 0x62, 0x9e, 0x9c, 0xe8, 0xa2, 0xeb, 0xab, 0x4d, 0x44, 0xbd, + 0x6d, 0x22, 0xf6, 0x7b, 0x23, 0x97, 0xc7, 0xf3, 0x87, 0xa5, 0xdf, 0xa5, + 0x82, 0x23, 0x37, 0x3c, 0x70, 0xe4, 0x3d, 0x81, 0x23, 0xef, 0x6d, 0x81, + 0x23, 0x7b, 0x95, 0x2d, 0xd1, 0x46, 0xcd, 0x0a, 0x3f, 0x5e, 0x63, 0xfc, + 0x78, 0x81, 0xf1, 0xe3, 0x50, 0x03, 0xfc, 0x30, 0x6a, 0xf0, 0xe3, 0xb0, + 0xc0, 0x8f, 0x9f, 0x6d, 0x8a, 0x1f, 0x87, 0xfc, 0x9b, 0xf9, 0x82, 0x34, + 0x6e, 0x0e, 0xd0, 0x4a, 0xce, 0xa1, 0xd5, 0x45, 0x9b, 0x2d, 0x7b, 0xd8, + 0xe6, 0x88, 0x19, 0xce, 0x88, 0x7a, 0x97, 0x82, 0xc0, 0x2b, 0x96, 0xe3, + 0x33, 0xa8, 0x69, 0xaa, 0xdb, 0x03, 0x12, 0xef, 0xa5, 0x14, 0xf0, 0x97, + 0x7b, 0x12, 0xcb, 0xac, 0x9f, 0xf9, 0x73, 0xde, 0xc7, 0x2b, 0x6b, 0x81, + 0x00, 0x7e, 0xf3, 0xcf, 0x04, 0x69, 0x63, 0x8d, 0xed, 0x54, 0xc6, 0xb1, + 0xab, 0xb9, 0x21, 0xba, 0x92, 0x1b, 0xa0, 0x8d, 0xdc, 0x30, 0xbd, 0x93, + 0xc3, 0x33, 0x00, 0x73, 0x3e, 0x16, 0x30, 0x37, 0xe8, 0x60, 0x90, 0xc7, + 0xac, 0x0e, 0xd0, 0xfa, 0xaa, 0xc6, 0x57, 0xe0, 0x2a, 0xf6, 0x3f, 0xd2, + 0x23, 0xeb, 0xd0, 0xea, 0x71, 0x20, 0x56, 0x85, 0x03, 0xf2, 0x1a, 0xec, + 0xfd, 0x42, 0x7d, 0x0d, 0x6d, 0xab, 0x39, 0x83, 0x1c, 0xb8, 0x36, 0xb6, + 0xc9, 0x6d, 0xe1, 0x73, 0x3d, 0xe8, 0x87, 0x4e, 0x6b, 0xdc, 0x4d, 0x5d, + 0xbc, 0x07, 0x0e, 0xf2, 0x87, 0x86, 0x59, 0x3f, 0xed, 0x16, 0xfa, 0x68, + 0xd4, 0x09, 0x84, 0x62, 0x54, 0x3a, 0x6b, 0x38, 0xe8, 0x93, 0xf8, 0x08, + 0xdf, 0xcf, 0x50, 0x7e, 0x9e, 0x4e, 0x17, 0x3e, 0xd5, 0xea, 0x9e, 0x88, + 0xd1, 0x9e, 0xe0, 0x39, 0x43, 0x4e, 0x56, 0xe2, 0x22, 0x54, 0x8e, 0x8b, + 0xb4, 0xf2, 0xba, 0x25, 0x2d, 0xcd, 0x39, 0x3c, 0xae, 0xc8, 0xe3, 0x8a, + 0x88, 0xa9, 0xf1, 0xf9, 0x55, 0xc4, 0x73, 0x87, 0x68, 0x63, 0x11, 0x34, + 0x07, 0xff, 0x44, 0x25, 0x86, 0xba, 0xb1, 0x86, 0xf3, 0xf0, 0x51, 0x54, + 0x62, 0xa8, 0x1b, 0x2a, 0x86, 0xba, 0xb1, 0x36, 0x2d, 0xf8, 0xf0, 0x42, + 0x8e, 0x79, 0x40, 0xce, 0xaf, 0xf2, 0x07, 0xf7, 0xa9, 0x77, 0xf6, 0x9c, + 0x10, 0x3e, 0xe4, 0x1e, 0x67, 0x73, 0x18, 0x1e, 0xac, 0x83, 0xe1, 0xb4, + 0xd0, 0x83, 0xe2, 0x7c, 0xcf, 0x58, 0xee, 0x04, 0xc3, 0x73, 0x96, 0x69, + 0x69, 0xb7, 0xa2, 0x25, 0x1d, 0x93, 0xed, 0x26, 0xf5, 0xfe, 0x1f, 0xa1, + 0xeb, 0x4b, 0xfe, 0x33, 0x54, 0xc3, 0x7f, 0x28, 0x10, 0x1d, 0x97, 0xd7, + 0xa7, 0x8b, 0xaf, 0x0c, 0x6b, 0xff, 0x5b, 0x9a, 0xef, 0xbb, 0x90, 0xdb, + 0x49, 0x4c, 0x97, 0xe5, 0xa6, 0x67, 0xce, 0xe0, 0x76, 0x9f, 0xad, 0x71, + 0xe1, 0xc4, 0x6d, 0xe0, 0x93, 0xbc, 0x47, 0x05, 0x9f, 0xfe, 0x77, 0x16, + 0xc0, 0xb2, 0x93, 0x05, 0x98, 0x57, 0x84, 0x80, 0xf5, 0x03, 0x03, 0xb4, + 0x8e, 0x39, 0x00, 0x1e, 0x53, 0x68, 0x02, 0xe6, 0x19, 0xa7, 0xf5, 0x40, + 0xfb, 0xfb, 0x95, 0xc1, 0xeb, 0x5d, 0x1b, 0xa0, 0x67, 0x4f, 0x2d, 0xea, + 0x79, 0x2c, 0x07, 0xca, 0xa3, 0x4e, 0x2a, 0x0c, 0x24, 0xe6, 0x27, 0x90, + 0xff, 0x80, 0xfe, 0x00, 0xf9, 0x11, 0x98, 0x9f, 0x9c, 0x81, 0x72, 0xa0, + 0x35, 0x53, 0xcd, 0x6b, 0x40, 0xfa, 0x40, 0x61, 0x08, 0x2a, 0x53, 0x41, + 0x63, 0x1d, 0x40, 0xf6, 0x12, 0x21, 0x68, 0xd8, 0x01, 0x69, 0x20, 0xbb, + 0x79, 0x8a, 0x08, 0x98, 0x9f, 0x14, 0x20, 0xc4, 0xd0, 0x00, 0xcf, 0x4f, + 0xec, 0x40, 0x97, 0xc2, 0xdc, 0xf4, 0xff, 0xff, 0x31, 0x15, 0x16, 0x60, + 0xda, 0x03, 0xad, 0xf9, 0xfc, 0xfd, 0xff, 0x80, 0x08, 0x0b, 0x43, 0x0b, + 0x7c, 0xed, 0x9e, 0xb0, 0x3c, 0xa8, 0x9c, 0x5b, 0x00, 0x64, 0xb5, 0xc1, + 0xeb, 0x6d, 0x16, 0xf0, 0x7d, 0xc4, 0x0b, 0x18, 0x7e, 0x01, 0xcb, 0x95, + 0xff, 0xff, 0x97, 0xc2, 0xd5, 0x82, 0x00, 0x00, 0xd4, 0xc2, 0xcb, 0x42, + 0x60, 0x7c, 0x00, 0x00, 0x00 }; +static u32 bnx2_COM_b09FwData[(0x0/4) + 1] = { 0x0 }; +static u32 bnx2_COM_b09FwRodata[(0x88/4) + 1] = { + 0x08001ad8, 0x08001b14, 0x08001b14, 0x08001b14, 0x08001b14, 0x08001b14, + 0x08001a24, 0x08001b14, 0x08001a98, 0x08001b14, 0x080019ac, 0x08001b14, + 0x08001b14, 0x08001b14, 0x080019b8, 0x0, 0x08002a2c, 0x08002a7c, + 0x08002aac, 0x08002adc, 0x08002b0c, 0x0, 0x08005fac, 0x08005fac, + 0x08005fac, 0x08005fac, 0x08005fac, 0x08005fd8, 0x08005fd8, 0x08006018, + 0x08006024, 0x08006024, 0x08005fac, 0x0, 0x0 }; +static u32 bnx2_COM_b09FwBss[(0x88/4) + 1] = { 0x0 }; +static u32 bnx2_COM_b09FwSbss[(0x5c/4) + 1] = { 0x0 }; + +static struct fw_info bnx2_com_fw_09 = { + .ver_major = 0x1, + .ver_minor = 0x0, + .ver_fix = 0x0, + + .start_addr = 0x080000b0, + + .text_addr = 0x08000000, + .text_len = 0x7c5c, + .text_index = 0x0, + .gz_text = bnx2_COM_b09FwText, + .gz_text_len = sizeof(bnx2_COM_b09FwText), + + .data_addr = 0x08007d00, + .data_len = 0x0, + .data_index = 0x0, + .data = bnx2_COM_b09FwData, + + .sbss_addr = 0x08007d00, + .sbss_len = 0x5c, + .sbss_index = 0x0, + .sbss = bnx2_COM_b09FwSbss, + + .bss_addr = 0x08007d60, + .bss_len = 0x88, + .bss_index = 0x0, + .bss = bnx2_COM_b09FwBss, + + .rodata_addr = 0x08007c60, + .rodata_len = 0x88, + .rodata_index = 0x0, + .rodata = bnx2_COM_b09FwRodata, +}; + +static u8 bnx2_CP_b09FwText[] = { + 0x1f, 0x8b, 0x08, 0x08, 0x8e, 0xfc, 0x2f, 0x45, 0x00, 0x03, 0x74, 0x65, + 0x73, 0x74, 0x31, 0x2e, 0x62, 0x69, 0x6e, 0x00, 0xbd, 0x7d, 0x0d, 0x74, + 0x5c, 0x57, 0x7d, 0xe7, 0xff, 0xdd, 0x79, 0x92, 0xc6, 0xb2, 0x2c, 0x3f, + 0xcb, 0x63, 0x65, 0x22, 0x0b, 0x7b, 0x46, 0x7a, 0xb2, 0x95, 0x58, 0x64, + 0xc7, 0xae, 0x00, 0x6d, 0x3b, 0x85, 0xe9, 0x48, 0xb2, 0x9d, 0x0f, 0x8a, + 0x4c, 0x44, 0x4f, 0x5a, 0xe8, 0x22, 0xc6, 0x76, 0x48, 0x80, 0xb2, 0x4e, + 0x09, 0x69, 0x80, 0x04, 0x0f, 0x23, 0xf9, 0x83, 0x74, 0xec, 0x51, 0x12, + 0xc5, 0x76, 0x4f, 0x73, 0x58, 0x55, 0x92, 0x1d, 0x43, 0xa7, 0x1e, 0x27, + 0x71, 0x68, 0xf6, 0x6c, 0x68, 0xb4, 0x4a, 0xe2, 0xa6, 0x3d, 0xd9, 0xd6, + 0xf4, 0x84, 0x6e, 0xda, 0x43, 0x77, 0x85, 0x71, 0x88, 0x4b, 0xb3, 0x4b, + 0xf8, 0x68, 0x61, 0xa1, 0xe5, 0xed, 0xef, 0x77, 0xef, 0x7d, 0xd2, 0xe8, + 0xc3, 0x09, 0xa1, 0xbb, 0xf5, 0x39, 0xcf, 0x6f, 0xde, 0xfd, 0xfc, 0xdf, + 0xff, 0xfd, 0x7f, 0xdf, 0x0f, 0xad, 0x17, 0xa9, 0x17, 0xfb, 0x6f, 0x15, + 0x9e, 0x6d, 0x89, 0x7d, 0xbb, 0xb7, 0x5e, 0xd7, 0x73, 0x1d, 0x7e, 0x6e, + 0x75, 0x57, 0x46, 0x95, 0xbc, 0x89, 0x7f, 0x89, 0x9f, 0xa1, 0x4c, 0x44, + 0xc4, 0x0b, 0xfb, 0xe2, 0x23, 0x51, 0x95, 0x1e, 0xfc, 0x64, 0xd6, 0x97, + 0x68, 0x24, 0x7d, 0xf6, 0xb3, 0xbb, 0x7d, 0x91, 0x4c, 0x79, 0x4b, 0xa2, + 0x57, 0xfe, 0x25, 0xc8, 0xc7, 0x5c, 0x61, 0xfa, 0x5b, 0xd2, 0xff, 0xfc, + 0x9f, 0xbe, 0xf2, 0x8e, 0xe4, 0x6b, 0xe3, 0x11, 0x89, 0x7a, 0xe9, 0x8f, + 0x89, 0xb7, 0x49, 0xa2, 0xad, 0xe9, 0x81, 0x4f, 0x3e, 0xbc, 0xf9, 0x6f, + 0x44, 0x1a, 0xc3, 0xb6, 0x2e, 0x07, 0x5f, 0xd9, 0x2c, 0xf9, 0x96, 0x74, + 0x7c, 0xc8, 0x4d, 0x7b, 0xf2, 0x74, 0x45, 0x06, 0x0a, 0xc5, 0xa8, 0x44, + 0xd2, 0x1d, 0x2f, 0xf5, 0x46, 0xf6, 0x07, 0x11, 0xdf, 0xf7, 0x7a, 0xa5, + 0xa1, 0x27, 0xdb, 0x8d, 0xf4, 0xf2, 0x56, 0x51, 0x7e, 0x54, 0xb2, 0x15, + 0x69, 0x50, 0xbe, 0x8f, 0x77, 0xbd, 0xa8, 0x74, 0xd2, 0xcb, 0x46, 0x5c, + 0x29, 0x54, 0x2e, 0xac, 0x30, 0x6d, 0x96, 0xec, 0xfb, 0x6f, 0xa2, 0xe6, + 0x8d, 0x36, 0x4b, 0x51, 0x99, 0x8d, 0xc4, 0x05, 0xfd, 0x00, 0xe6, 0x06, + 0x19, 0x2e, 0x25, 0x24, 0x5b, 0x64, 0xbf, 0xae, 0xe4, 0x3c, 0xf6, 0xd9, + 0x80, 0xfa, 0x2b, 0x9d, 0xe5, 0xcb, 0xb3, 0xec, 0x4b, 0x28, 0x9b, 0x40, + 0xb9, 0x56, 0x79, 0xbc, 0x12, 0x97, 0xc7, 0x2a, 0x31, 0x79, 0xb4, 0x72, + 0x87, 0x64, 0x50, 0xf7, 0x6c, 0x05, 0x7d, 0x97, 0x6a, 0xa5, 0x77, 0xac, + 0x5e, 0xb2, 0x63, 0xed, 0xf1, 0x9c, 0x04, 0xc1, 0x27, 0x52, 0x1f, 0x95, + 0xa1, 0x26, 0x94, 0x2f, 0x31, 0x2f, 0xbe, 0x20, 0x2f, 0x97, 0xda, 0xe2, + 0xe5, 0x94, 0x23, 0x99, 0xc1, 0x64, 0x7c, 0x48, 0xf1, 0xbb, 0x46, 0xb2, + 0x5d, 0xf8, 0x1e, 0x70, 0x25, 0xe2, 0x07, 0xc1, 0x1d, 0xa9, 0x26, 0xc0, + 0x91, 0x4c, 0x24, 0x14, 0xeb, 0xb2, 0x5e, 0x32, 0x9f, 0x50, 0x51, 0xc9, + 0x57, 0xae, 0x93, 0x44, 0x53, 0x10, 0xbc, 0x37, 0xe5, 0x21, 0x5d, 0xa4, + 0xb7, 0x28, 0xfb, 0x54, 0xda, 0x47, 0x9b, 0x92, 0x52, 0xe9, 0xb5, 0x18, + 0xc7, 0x16, 0xe0, 0xa9, 0x56, 0x32, 0x31, 0xc9, 0xa8, 0xb4, 0x24, 0x54, + 0x7a, 0x05, 0xd2, 0x1c, 0xa9, 0xf1, 0xa7, 0x2c, 0x9d, 0xac, 0xc6, 0xb7, + 0x0c, 0xa8, 0x74, 0xd3, 0xa2, 0xf4, 0x64, 0x42, 0xd4, 0x8f, 0xea, 0xd0, + 0x67, 0x67, 0x46, 0x31, 0x0d, 0x6f, 0x9d, 0x76, 0xfd, 0x32, 0x69, 0x1f, + 0x74, 0x16, 0xa6, 0x3d, 0xb5, 0x8a, 0xb0, 0x8a, 0xe2, 0xef, 0x28, 0xe0, + 0x6a, 0x41, 0xff, 0xed, 0x5e, 0x0d, 0xc6, 0x35, 0x90, 0x4a, 0x7a, 0xfd, + 0xea, 0xc5, 0x40, 0x9a, 0x09, 0x33, 0xf3, 0x14, 0xf2, 0x50, 0x34, 0x9d, + 0xc2, 0xbc, 0xb9, 0x72, 0x08, 0x63, 0xbb, 0x38, 0x96, 0xf4, 0xda, 0x14, + 0xde, 0x53, 0xfc, 0xdd, 0x34, 0x14, 0x49, 0x07, 0x41, 0x36, 0x35, 0x2e, + 0xb9, 0x72, 0xd2, 0x9b, 0x05, 0x70, 0xbd, 0x63, 0x71, 0x8c, 0x1f, 0xe3, + 0x88, 0x65, 0x92, 0x6b, 0xa4, 0xcb, 0xce, 0xcf, 0x5f, 0xa2, 0xef, 0x76, + 0xef, 0x0e, 0xd5, 0xee, 0xa5, 0x54, 0xd2, 0x9b, 0x90, 0x3f, 0xc4, 0x77, + 0x10, 0xec, 0x4a, 0x25, 0xe3, 0x79, 0xcc, 0xdd, 0xa5, 0x62, 0x4c, 0x5e, + 0x2e, 0x26, 0x41, 0xa9, 0xc9, 0xce, 0x49, 0xd9, 0x92, 0x9a, 0x04, 0xdc, + 0x05, 0x3c, 0x07, 0x99, 0x57, 0x46, 0x5e, 0x99, 0x75, 0x83, 0xe0, 0xe6, + 0xd4, 0x89, 0x60, 0xa8, 0xd9, 0xd0, 0xfe, 0xd3, 0x25, 0xcc, 0x2b, 0xe6, + 0xe9, 0xb1, 0x12, 0xe6, 0xb5, 0x84, 0x39, 0xd5, 0xf3, 0xdf, 0x89, 0xf9, + 0x27, 0x8d, 0x90, 0x3e, 0xb6, 0x59, 0x7a, 0x7d, 0xb7, 0x7d, 0x8b, 0x64, + 0x4b, 0x8e, 0x64, 0x53, 0x3f, 0x09, 0x32, 0x9a, 0x27, 0xc4, 0xe9, 0x2d, + 0x91, 0x26, 0x6b, 0x00, 0x2b, 0x3f, 0x7f, 0xdd, 0x96, 0x8b, 0x3a, 0x18, + 0x06, 0xe7, 0x83, 0xf9, 0x51, 0xe5, 0xd7, 0xd9, 0xfc, 0x90, 0xf6, 0xf9, + 0x0f, 0x74, 0xe7, 0xcf, 0x97, 0xcb, 0x92, 0x36, 0x2b, 0x22, 0xb9, 0x07, + 0x03, 0xe9, 0x4d, 0x01, 0x5f, 0x6c, 0xd3, 0x4b, 0x89, 0xae, 0xeb, 0xb1, + 0x8c, 0x2e, 0x8b, 0x7f, 0x3f, 0xae, 0x41, 0x1f, 0x4e, 0x5f, 0x69, 0xbe, + 0x6e, 0x5f, 0xe9, 0x85, 0x98, 0x85, 0x0f, 0xdf, 0x3d, 0x4e, 0xb6, 0xf2, + 0x77, 0x76, 0x8e, 0xc3, 0x71, 0x74, 0x2d, 0x43, 0xe3, 0x2e, 0xf8, 0xc1, + 0x93, 0x5c, 0xb1, 0x07, 0xfd, 0xc6, 0xf0, 0x0e, 0x82, 0x91, 0x54, 0x26, + 0xe9, 0x4a, 0x1a, 0xdf, 0x03, 0x98, 0xaf, 0x0e, 0xe0, 0x4f, 0xdc, 0xec, + 0xe6, 0x94, 0xf4, 0x55, 0x40, 0x7b, 0x95, 0x37, 0x96, 0x14, 0x7a, 0x0c, + 0xa9, 0x7f, 0xb1, 0xb8, 0x61, 0x3f, 0x7c, 0xbb, 0x32, 0x02, 0xfa, 0x28, + 0x8c, 0xf9, 0x32, 0x5c, 0x9c, 0xf6, 0x94, 0x24, 0x41, 0xbb, 0x69, 0xe9, + 0xad, 0xf8, 0x52, 0x28, 0xe2, 0x5d, 0x6a, 0x07, 0xfd, 0xba, 0x92, 0x89, + 0x9b, 0x39, 0x29, 0x14, 0x7f, 0x09, 0xe3, 0x02, 0x8e, 0x7d, 0xfe, 0xee, + 0xb1, 0xb0, 0x80, 0xf7, 0xbb, 0x53, 0x1a, 0x3f, 0x6f, 0x0e, 0x06, 0xf6, + 0x8d, 0x31, 0x60, 0x9c, 0x85, 0xb2, 0x8b, 0x77, 0x0c, 0xef, 0x90, 0x16, + 0xe3, 0x80, 0xa9, 0x55, 0x86, 0x41, 0x8b, 0xbd, 0x82, 0xdf, 0x53, 0x84, + 0x91, 0xfd, 0xb6, 0xe8, 0xdf, 0xc3, 0x63, 0x1b, 0xf4, 0x77, 0x6e, 0xa0, + 0x45, 0xf2, 0x53, 0xe1, 0x58, 0x28, 0x0f, 0x28, 0x03, 0x92, 0x87, 0x45, + 0x28, 0x13, 0x82, 0xe0, 0xc1, 0x14, 0xe5, 0x42, 0x10, 0x3c, 0x96, 0xa2, + 0x9c, 0x38, 0x07, 0xfe, 0xa7, 0x6c, 0x20, 0xaf, 0xae, 0x55, 0x9c, 0x83, + 0x6c, 0x11, 0x7d, 0x40, 0x4e, 0xe4, 0xba, 0x4e, 0x40, 0x6e, 0x50, 0xae, + 0x5c, 0xf8, 0x44, 0xd6, 0xcf, 0xc7, 0x23, 0x1a, 0x0f, 0x98, 0x6f, 0xc8, + 0xbc, 0x8c, 0x86, 0xbc, 0x4d, 0x0a, 0x5d, 0xa3, 0xb6, 0xcc, 0x65, 0x5d, + 0xc6, 0x5d, 0x52, 0xe6, 0x76, 0x65, 0xf8, 0xae, 0x15, 0xf3, 0xb1, 0x42, + 0x11, 0x4f, 0x6d, 0x9b, 0xf8, 0x2d, 0xd1, 0x9a, 0xf4, 0x97, 0x90, 0x37, + 0x7d, 0xd7, 0x49, 0x7f, 0xb9, 0xbc, 0x59, 0x77, 0x69, 0xde, 0x88, 0xb8, + 0x7e, 0xb2, 0x73, 0x97, 0x9a, 0x01, 0x3d, 0x05, 0xc1, 0xc9, 0x54, 0x98, + 0xfe, 0x8f, 0xee, 0xd2, 0x3e, 0x12, 0x35, 0x4b, 0xd3, 0xee, 0x5d, 0x26, + 0xed, 0xc4, 0x32, 0x69, 0x1b, 0x6a, 0x97, 0xa6, 0xbd, 0x7f, 0x99, 0xb4, + 0xfb, 0x97, 0x49, 0xfb, 0x5f, 0xcb, 0xa4, 0x7d, 0x67, 0x99, 0xb4, 0xef, + 0x2d, 0x93, 0xd6, 0x52, 0xb7, 0x34, 0xcd, 0x05, 0x3f, 0x6d, 0x92, 0x42, + 0xec, 0x73, 0x1c, 0xbb, 0xc5, 0xcd, 0xfe, 0xc8, 0x52, 0xdc, 0xd4, 0xa0, + 0x5c, 0xeb, 0xa2, 0x72, 0x53, 0xcb, 0x94, 0xab, 0x45, 0xb9, 0xa6, 0x45, + 0xe5, 0x92, 0xcb, 0xe0, 0xba, 0x4e, 0xeb, 0xaf, 0x85, 0xe5, 0x0a, 0xcb, + 0x94, 0x63, 0xfa, 0x1e, 0xdb, 0xcf, 0x16, 0x68, 0x99, 0xd7, 0x9b, 0xaf, + 0x5a, 0x91, 0x66, 0xa6, 0xb7, 0x42, 0x47, 0xac, 0x50, 0x86, 0xdf, 0x29, + 0x5b, 0x98, 0xe6, 0x81, 0xee, 0xa3, 0xa0, 0x3b, 0xca, 0x47, 0xf0, 0x91, + 0x4f, 0xfe, 0x5d, 0x25, 0x43, 0xb1, 0x2d, 0xde, 0x2f, 0xa8, 0x06, 0xd0, + 0x58, 0xd2, 0x4b, 0x28, 0xf2, 0x97, 0xe4, 0x23, 0x69, 0x3f, 0xdf, 0x2b, + 0x2a, 0xa6, 0x24, 0x90, 0xbe, 0x94, 0x6a, 0x52, 0xb2, 0x1f, 0xfc, 0x93, + 0x81, 0x4e, 0xda, 0x15, 0xf4, 0x6a, 0x1e, 0x32, 0x65, 0xaf, 0x2c, 0x2b, + 0x7d, 0x39, 0x48, 0x19, 0x97, 0xce, 0xdc, 0x95, 0xf5, 0xa7, 0x7b, 0x6a, + 0x41, 0xb3, 0x17, 0x51, 0x67, 0x07, 0x6a, 0xee, 0x2d, 0xbb, 0xd2, 0x57, + 0xee, 0x04, 0x2f, 0x38, 0x72, 0xde, 0x5f, 0x2d, 0xe7, 0x53, 0x28, 0x5b, + 0x89, 0xc8, 0x4c, 0xcc, 0x91, 0x19, 0x7c, 0x67, 0x53, 0xc8, 0xab, 0x84, + 0xbc, 0xd5, 0x29, 0x07, 0x4a, 0xbe, 0x1c, 0x2e, 0xfd, 0x92, 0x0a, 0xf5, + 0x56, 0x7f, 0x6a, 0xa5, 0x9c, 0xf6, 0x4c, 0xdb, 0x3b, 0xfc, 0x69, 0x68, + 0x4c, 0x57, 0x2e, 0xfa, 0xc9, 0xf8, 0x8c, 0xe6, 0x89, 0x1f, 0x06, 0x7d, + 0x68, 0x67, 0xc2, 0x4f, 0x7a, 0x7f, 0x8a, 0xef, 0xa1, 0x32, 0xed, 0x90, + 0xf9, 0xb6, 0x86, 0xd1, 0xd6, 0xa1, 0xd2, 0x2a, 0xf9, 0xb0, 0xad, 0xbf, + 0xdd, 0x9f, 0xee, 0x04, 0xcf, 0x79, 0xa7, 0x28, 0x23, 0x8a, 0x80, 0x6b, + 0x10, 0xbc, 0x8d, 0xba, 0xcf, 0x69, 0x39, 0x05, 0xbb, 0xa5, 0xb8, 0x1a, + 0x72, 0xf7, 0x1f, 0x83, 0x0f, 0xc7, 0x58, 0x9e, 0x69, 0xd4, 0x25, 0x32, + 0xaa, 0xd2, 0x90, 0x09, 0xdd, 0x94, 0x85, 0x09, 0xc8, 0x41, 0xc8, 0x96, + 0xd2, 0x4f, 0x83, 0x8c, 0x5b, 0x2d, 0xdf, 0x24, 0x3f, 0x5f, 0x86, 0x69, + 0x09, 0x23, 0x2f, 0x4b, 0xb3, 0x73, 0xb2, 0x22, 0x0f, 0xf9, 0xf2, 0x74, + 0x85, 0x72, 0xe1, 0x7a, 0xf0, 0x68, 0xab, 0xf4, 0x15, 0x93, 0xf9, 0x8c, + 0x6c, 0xc2, 0xfc, 0x7d, 0x1e, 0x73, 0xea, 0xe2, 0xb9, 0xaf, 0x5e, 0x1a, + 0x53, 0xd0, 0xcd, 0x4c, 0x47, 0xa3, 0xcd, 0x51, 0xc8, 0xa8, 0xdf, 0x03, + 0x1e, 0x86, 0x39, 0xe7, 0xf1, 0x6c, 0xc4, 0x19, 0xa0, 0x3d, 0x32, 0x40, + 0xfd, 0x50, 0x66, 0xdb, 0x84, 0x37, 0x6e, 0x7f, 0x47, 0xb5, 0x8c, 0x31, + 0xbf, 0x1b, 0xf0, 0x3b, 0x61, 0x7f, 0x7b, 0xf8, 0xed, 0xdb, 0xdf, 0x31, + 0xfc, 0xee, 0xb4, 0xbf, 0xa1, 0x5b, 0x8b, 0x5d, 0xfa, 0xf7, 0x48, 0x69, + 0xfb, 0x76, 0xe5, 0x5f, 0x27, 0xb9, 0xa9, 0x56, 0x39, 0x50, 0xf4, 0xad, + 0x6c, 0xc1, 0x23, 0x4f, 0x3a, 0x66, 0x9c, 0x80, 0x9b, 0xb2, 0xb3, 0x94, + 0x77, 0x06, 0x08, 0x3f, 0x68, 0xa0, 0xb7, 0xb8, 0xc5, 0x5b, 0x23, 0xa4, + 0x81, 0x11, 0xa7, 0xb7, 0xe2, 0x64, 0x60, 0xaf, 0xc5, 0x87, 0xe5, 0x30, + 0x7e, 0x8b, 0x17, 0x49, 0x3f, 0x89, 0xb7, 0xc1, 0x01, 0xf5, 0xce, 0x70, + 0x89, 0xf2, 0xd2, 0xc7, 0xd8, 0x13, 0x72, 0x6e, 0x81, 0x0d, 0x45, 0x5c, + 0x28, 0xc9, 0x8d, 0x25, 0x4f, 0xe4, 0x25, 0x99, 0x1f, 0x07, 0x43, 0xec, + 0x4a, 0xb9, 0xf2, 0xde, 0x14, 0x68, 0xf7, 0x3a, 0x47, 0xb6, 0x5f, 0xe7, + 0xc2, 0xe6, 0xf1, 0xc7, 0xb7, 0x83, 0xfe, 0x31, 0xcf, 0x9a, 0x1e, 0xd4, + 0x19, 0x81, 0x9d, 0x08, 0x6c, 0x9f, 0xe9, 0xea, 0x1b, 0x2e, 0xe6, 0x3e, + 0xa6, 0xd2, 0xfb, 0x3e, 0x95, 0xed, 0xbe, 0x46, 0x72, 0x83, 0x0a, 0x38, + 0x6a, 0x1e, 0x82, 0x1e, 0xc4, 0xb8, 0x82, 0x00, 0xf4, 0x0c, 0x79, 0x7e, + 0xf3, 0xcd, 0x91, 0x74, 0x8d, 0xf4, 0x0e, 0x36, 0xa3, 0x0e, 0xf3, 0x88, + 0xaf, 0xaf, 0xa2, 0x9d, 0x64, 0xa2, 0x4f, 0xe4, 0x9e, 0x91, 0xee, 0x59, + 0x67, 0x78, 0xf4, 0x37, 0xc0, 0x93, 0x5b, 0x51, 0xff, 0x01, 0xd4, 0x7f, + 0xcd, 0x29, 0x8c, 0xfd, 0xc8, 0x19, 0x1e, 0xfb, 0x9e, 0x33, 0x32, 0xb6, + 0x61, 0x43, 0x7f, 0xcf, 0x86, 0x0d, 0xbb, 0x7b, 0x5c, 0x99, 0x00, 0x8f, + 0x65, 0xbc, 0x0d, 0x1b, 0x46, 0x7a, 0xba, 0x80, 0x83, 0x2d, 0x5e, 0x9f, + 0xf8, 0xde, 0x76, 0x01, 0xff, 0xc4, 0xd8, 0x67, 0x14, 0xf9, 0x49, 0xe4, + 0xb3, 0x7e, 0x5c, 0xe7, 0xf7, 0xca, 0x96, 0x78, 0x93, 0xb0, 0xff, 0x88, + 0x2d, 0x53, 0x13, 0x91, 0xfa, 0x07, 0xec, 0xfc, 0x66, 0x9c, 0x1a, 0x9f, + 0xe9, 0x1c, 0x0b, 0xd3, 0x39, 0xb7, 0x7f, 0x67, 0x6d, 0xd5, 0xd5, 0x48, + 0xe7, 0x37, 0x71, 0x46, 0xbc, 0xd0, 0xc6, 0xa8, 0xd1, 0xb6, 0x61, 0xae, + 0x48, 0x9a, 0x71, 0x65, 0x4f, 0xd1, 0x41, 0x1d, 0xd0, 0xc5, 0x19, 0xfb, + 0x1c, 0x05, 0x6c, 0x83, 0x68, 0xeb, 0xe8, 0x21, 0xd4, 0xa3, 0xcc, 0x48, + 0x76, 0x8a, 0xfa, 0x00, 0xca, 0x6c, 0xf1, 0xd6, 0x0a, 0x6d, 0x89, 0x3b, + 0x25, 0x57, 0x22, 0x7f, 0x77, 0x00, 0x9e, 0xa8, 0x24, 0x9a, 0xf1, 0x5d, + 0x81, 0x4d, 0xf1, 0x60, 0x8d, 0x58, 0xdb, 0x45, 0xe6, 0x6d, 0x91, 0x3b, + 0x94, 0xc0, 0xde, 0x18, 0x9a, 0x5c, 0x8f, 0x72, 0x0e, 0xf0, 0x42, 0xfb, + 0x03, 0xb4, 0x36, 0x99, 0x91, 0xec, 0x26, 0xf0, 0xc9, 0xa4, 0x87, 0x6f, + 0xc0, 0x35, 0xf9, 0x16, 0xbc, 0x23, 0xfa, 0xdb, 0xc0, 0x09, 0xbc, 0xa6, + 0x22, 0x56, 0x67, 0x75, 0xa1, 0xef, 0xf7, 0x48, 0x76, 0x34, 0x4e, 0x5b, + 0x62, 0x75, 0xd6, 0xcf, 0x40, 0xd7, 0x2b, 0x28, 0x41, 0x8c, 0x61, 0xd2, + 0x81, 0x3c, 0xa9, 0x95, 0xdd, 0x8f, 0xe0, 0xf7, 0x83, 0xc6, 0xe6, 0xdd, + 0x3d, 0xc9, 0x7e, 0x1a, 0x00, 0x13, 0x6c, 0x90, 0x47, 0x60, 0x9b, 0x3e, + 0x02, 0x1b, 0xe4, 0x91, 0x66, 0x3c, 0x1c, 0x1b, 0xdb, 0x9f, 0x59, 0x03, + 0x31, 0xa9, 0xbf, 0x73, 0xa4, 0x57, 0xd8, 0xea, 0xb9, 0x62, 0xca, 0x94, + 0x2f, 0x76, 0xeb, 0xb7, 0xa1, 0xeb, 0x1e, 0xfb, 0x3b, 0xae, 0xf9, 0x3a, + 0xdf, 0x04, 0x9a, 0xaf, 0x74, 0x69, 0x99, 0x93, 0xf5, 0xf1, 0x86, 0xcd, + 0x99, 0x69, 0xe2, 0x18, 0xe3, 0x36, 0x2d, 0xae, 0xd3, 0x12, 0x4d, 0xd6, + 0xde, 0x28, 0x59, 0x5b, 0x03, 0xb8, 0x19, 0x6a, 0x06, 0xc4, 0x94, 0xcf, + 0x12, 0xe2, 0x93, 0x32, 0x00, 0xf4, 0x0b, 0x9b, 0xe2, 0xdc, 0x15, 0xe5, + 0xdf, 0xac, 0xb6, 0xb1, 0xce, 0x56, 0x48, 0xc7, 0xa4, 0xed, 0x20, 0xb8, + 0x3f, 0x55, 0x87, 0xf6, 0xc9, 0xf3, 0xb0, 0x40, 0x8e, 0x02, 0x26, 0x60, + 0xa2, 0xc6, 0x3f, 0xab, 0x69, 0xa0, 0xd6, 0x27, 0x0d, 0x57, 0xf3, 0x97, + 0xe8, 0xf1, 0x9e, 0x05, 0x8f, 0xc1, 0xbe, 0x81, 0xfd, 0xd6, 0x01, 0xdb, + 0x98, 0x7d, 0x1c, 0xe6, 0xb7, 0xa7, 0xc0, 0x53, 0xd9, 0x39, 0x9e, 0x12, + 0x99, 0x28, 0x12, 0x37, 0xa1, 0x5d, 0xc7, 0x79, 0x26, 0x7e, 0x32, 0x18, + 0x33, 0xdf, 0x7d, 0x16, 0x4f, 0x3b, 0x2d, 0x9e, 0x6e, 0xb2, 0xef, 0x11, + 0xbc, 0x69, 0xe3, 0x0d, 0xe0, 0xcd, 0xf9, 0x19, 0xc4, 0x9b, 0xbc, 0x75, + 0x0b, 0xde, 0x28, 0x5b, 0xca, 0xc8, 0x6e, 0x6d, 0x87, 0x45, 0xe4, 0x57, + 0xb4, 0x6c, 0xfb, 0x02, 0xe6, 0xb2, 0x48, 0xfa, 0x95, 0x7c, 0x2c, 0x02, + 0x9c, 0x14, 0xf0, 0xfb, 0x4e, 0xd7, 0xd0, 0x2a, 0x71, 0xb2, 0xc0, 0x57, + 0xaa, 0x82, 0x29, 0x66, 0xe5, 0x5c, 0x42, 0xdb, 0xfa, 0xb9, 0xe2, 0x07, + 0x34, 0x5c, 0xb7, 0x42, 0xde, 0xe5, 0x45, 0x35, 0x43, 0x37, 0x80, 0x16, + 0x54, 0x0c, 0x9a, 0x2b, 0x78, 0x06, 0x7a, 0x29, 0x37, 0x49, 0xdb, 0xb8, + 0x8d, 0x7e, 0x49, 0x34, 0xd7, 0xd5, 0x48, 0x3a, 0x52, 0x0a, 0xf6, 0x17, + 0xbe, 0x55, 0xae, 0x4b, 0xd3, 0xa9, 0xa3, 0xfc, 0x98, 0xb6, 0x7f, 0x5d, + 0x1f, 0xd2, 0xd6, 0xf8, 0xbd, 0xae, 0xf2, 0xd7, 0x2e, 0x4e, 0x4b, 0x50, + 0x0f, 0xa3, 0x5e, 0x22, 0xd7, 0xd5, 0x4c, 0x1e, 0xf3, 0x40, 0xbf, 0x19, + 0xe5, 0x6b, 0xdf, 0x27, 0xaf, 0xba, 0x57, 0x2f, 0x2a, 0xaf, 0xdf, 0x8e, + 0xfd, 0x76, 0xed, 0xdb, 0xb3, 0xef, 0x84, 0x7d, 0xe7, 0xdd, 0x6e, 0xbe, + 0x1d, 0x71, 0xd3, 0x7c, 0x83, 0x92, 0xd3, 0x6c, 0x43, 0xf3, 0x95, 0x95, + 0x33, 0x1d, 0x5e, 0x41, 0xc8, 0x57, 0x9f, 0x93, 0x5b, 0x27, 0x8d, 0xfc, + 0xdd, 0x0e, 0x19, 0x04, 0xff, 0xcc, 0x9b, 0x11, 0xc0, 0x3f, 0x98, 0x96, + 0x5b, 0x2b, 0xc4, 0xdb, 0xef, 0x02, 0x7f, 0x60, 0xe2, 0x7a, 0xea, 0x74, + 0xca, 0xdd, 0x3b, 0x61, 0xf7, 0xa2, 0x7c, 0x91, 0x38, 0x1f, 0xd2, 0x73, + 0x53, 0x28, 0xee, 0xd1, 0x73, 0x73, 0xb0, 0x38, 0x03, 0xfc, 0xdc, 0x06, + 0xba, 0x0f, 0x82, 0x99, 0x54, 0x01, 0x94, 0xf3, 0x11, 0xfc, 0x86, 0x1d, + 0x50, 0xfc, 0x18, 0xf2, 0x1b, 0xa5, 0x30, 0x4a, 0x9e, 0x73, 0x2d, 0x0f, + 0xbf, 0x13, 0xfc, 0x14, 0x45, 0xbb, 0x48, 0xeb, 0xe6, 0xef, 0x9f, 0x20, + 0x0f, 0xef, 0x49, 0x4c, 0x62, 0x33, 0x6d, 0x1d, 0xf6, 0xcd, 0xb9, 0xe3, + 0x9c, 0xc5, 0xb4, 0x2c, 0x3f, 0x3b, 0x37, 0x6f, 0x97, 0xe7, 0xe8, 0x36, + 0x4f, 0x1f, 0x8f, 0xf9, 0x1a, 0x56, 0xd2, 0xfd, 0xb7, 0xb4, 0x5c, 0x72, + 0x8f, 0xce, 0xac, 0x30, 0xef, 0xc5, 0x75, 0x39, 0xe7, 0xd5, 0x34, 0x48, + 0xbf, 0x25, 0xd9, 0x93, 0x07, 0x3f, 0x61, 0x9c, 0xd2, 0xa7, 0x7d, 0x1d, + 0xd2, 0x04, 0x69, 0x60, 0xdc, 0xd2, 0xe6, 0x94, 0xa5, 0xcd, 0x27, 0xf1, + 0xc6, 0x53, 0xba, 0x60, 0x69, 0xf3, 0x29, 0xbc, 0xf1, 0x94, 0x5e, 0x9c, + 0xe3, 0xe3, 0x5e, 0xf8, 0x72, 0xdb, 0xa1, 0xdf, 0x76, 0x57, 0x40, 0xbf, + 0xe0, 0xbb, 0x1c, 0x7c, 0x80, 0x5c, 0x69, 0x1f, 0xde, 0xec, 0x67, 0xa3, + 0x6d, 0x3f, 0x23, 0x7b, 0x4a, 0x01, 0xc6, 0x78, 0x37, 0xc6, 0xfb, 0x39, + 0xbc, 0x3f, 0xa3, 0xe5, 0x8c, 0xf2, 0x0f, 0x5b, 0x79, 0xf5, 0x79, 0xbc, + 0xdb, 0xe3, 0x07, 0xa5, 0xdd, 0x8b, 0xc8, 0x34, 0xda, 0xfa, 0xba, 0xec, + 0xa9, 0xcc, 0xe2, 0xb9, 0x84, 0xe7, 0x55, 0x3c, 0x97, 0xd1, 0xde, 0x0b, + 0x48, 0x5f, 0x29, 0xd3, 0x5e, 0x3d, 0xca, 0xbf, 0x86, 0xdf, 0xcf, 0xcb, + 0xd0, 0x23, 0x2f, 0xe1, 0xf9, 0x01, 0xf2, 0x9f, 0x45, 0xfd, 0x60, 0xf5, + 0x8c, 0x4f, 0x19, 0xf6, 0x9c, 0x6d, 0x3b, 0xe5, 0xe4, 0x2a, 0xa0, 0xe9, + 0xd2, 0x00, 0xfa, 0xde, 0xa3, 0x79, 0xa6, 0x0f, 0x32, 0x3f, 0x07, 0x19, + 0x37, 0xa4, 0x61, 0x6a, 0x07, 0x7c, 0x79, 0xcc, 0x05, 0xde, 0x93, 0xb5, + 0x32, 0x1b, 0xa3, 0x1d, 0x79, 0x93, 0x2e, 0x9f, 0x2b, 0x35, 0x69, 0xbb, + 0x7a, 0x7c, 0x09, 0xff, 0xd0, 0xef, 0x0a, 0xe5, 0x81, 0x91, 0xc6, 0x13, + 0x45, 0xca, 0x02, 0xe8, 0x9f, 0xe2, 0x08, 0xde, 0xb5, 0x5a, 0x26, 0x14, + 0x24, 0x94, 0x07, 0xac, 0x47, 0x99, 0x50, 0x2d, 0x77, 0x28, 0x6b, 0x28, + 0x7b, 0x28, 0x4b, 0xcc, 0x7c, 0xec, 0x7e, 0x90, 0x32, 0x1c, 0xb4, 0x10, + 0xa3, 0xfd, 0xe1, 0x19, 0x1f, 0x64, 0xec, 0x3e, 0x2b, 0x4f, 0x47, 0xf5, + 0x5c, 0xec, 0x29, 0xaa, 0x98, 0x2b, 0xa7, 0x91, 0x86, 0xe7, 0xf8, 0xc3, + 0x78, 0x7f, 0x49, 0xf6, 0xe0, 0xc9, 0x1d, 0xff, 0x02, 0x7e, 0x73, 0x6e, + 0xca, 0x28, 0x87, 0xa7, 0x74, 0x02, 0x6f, 0x3c, 0xa5, 0x31, 0x2b, 0x47, + 0xc6, 0xad, 0x1c, 0xe1, 0x9c, 0xde, 0x04, 0x3c, 0x70, 0x7c, 0x4a, 0xc7, + 0x17, 0xc0, 0xcf, 0x4e, 0x6e, 0xf2, 0x5d, 0xd6, 0x8f, 0x6d, 0x14, 0xc3, + 0x83, 0x78, 0x3a, 0xc9, 0xcf, 0x0d, 0xda, 0x0e, 0xce, 0x69, 0xda, 0xfd, + 0x2b, 0xd7, 0xf0, 0x62, 0xcc, 0xe8, 0x14, 0xaf, 0x59, 0x34, 0xef, 0xcf, + 0xe1, 0x31, 0x63, 0xf1, 0xc8, 0xdf, 0xca, 0xfe, 0x86, 0xdc, 0x82, 0x4d, + 0x9b, 0xf5, 0x7d, 0xcc, 0x03, 0xc6, 0x72, 0x7c, 0x14, 0x7d, 0x3b, 0xb2, + 0xdb, 0xa7, 0x0c, 0x67, 0x0c, 0x81, 0xe3, 0x63, 0xbb, 0x48, 0xd7, 0x38, + 0x48, 0xc9, 0xbc, 0x6f, 0x7e, 0x13, 0xe6, 0x2c, 0x23, 0x7b, 0x4b, 0xf7, + 0x6a, 0x5f, 0xb9, 0xf6, 0x68, 0x93, 0xf5, 0x73, 0xc2, 0x72, 0xa0, 0xd5, + 0x18, 0x6d, 0x9b, 0x2f, 0xc5, 0x0c, 0xcd, 0xf3, 0x37, 0xe5, 0x73, 0xb5, + 0xbc, 0x37, 0x76, 0x4d, 0x61, 0x81, 0xac, 0xa3, 0x6d, 0x81, 0x39, 0x2b, + 0x57, 0xe3, 0x9d, 0xbe, 0x3b, 0xf9, 0x8a, 0xfc, 0x74, 0x10, 0x3c, 0xf1, + 0x5d, 0xcb, 0xfb, 0xf4, 0x35, 0xd8, 0xe7, 0x62, 0x7e, 0xf2, 0x60, 0xfb, + 0xba, 0x72, 0x0a, 0xb6, 0xdb, 0xf6, 0xb9, 0x36, 0xae, 0x06, 0x3c, 0x51, + 0x79, 0xa4, 0xd8, 0x20, 0x93, 0x45, 0xd5, 0x1c, 0xb1, 0xb2, 0x33, 0x22, + 0x09, 0x4d, 0xdf, 0xb4, 0xef, 0x7a, 0xc7, 0x22, 0x96, 0xee, 0xd6, 0xd5, + 0x48, 0xfd, 0xef, 0x42, 0xc7, 0xa6, 0xa1, 0x63, 0x1b, 0xa1, 0x83, 0x17, + 0xcb, 0x88, 0x35, 0x35, 0x4b, 0x65, 0x04, 0xeb, 0x24, 0xe1, 0x75, 0x1f, + 0x44, 0xbd, 0x90, 0xfe, 0xa2, 0x9a, 0xd6, 0x72, 0x92, 0x77, 0xb6, 0x57, + 0x46, 0x9c, 0x1d, 0x95, 0xc5, 0x3a, 0x68, 0x8b, 0xe7, 0x8a, 0x81, 0xf5, + 0x91, 0x22, 0x6d, 0xd4, 0x64, 0x2a, 0x0b, 0x9c, 0xec, 0x00, 0xcc, 0xcf, + 0x8c, 0xc2, 0x4f, 0xa7, 0x5c, 0x06, 0xcc, 0xa7, 0x01, 0xf3, 0xc4, 0xa8, + 0x13, 0xda, 0x06, 0xc2, 0xa0, 0xc8, 0xc4, 0x58, 0x97, 0xcc, 0x4c, 0x91, + 0x0e, 0x21, 0x03, 0x46, 0x31, 0x9f, 0xa9, 0x15, 0xb0, 0x03, 0xd8, 0x3f, + 0xe4, 0xf6, 0x58, 0x8b, 0xce, 0x33, 0xfa, 0xbc, 0x55, 0x66, 0xca, 0x69, + 0x0b, 0xdb, 0xe1, 0x2a, 0xd8, 0x56, 0xcc, 0xc1, 0xb6, 0x03, 0xb0, 0xed, + 0x5c, 0x16, 0xb6, 0xe5, 0x74, 0x71, 0x1b, 0x6c, 0x1a, 0xa3, 0x8b, 0x0d, + 0x5e, 0x9b, 0x2d, 0x3d, 0xbc, 0xdf, 0xda, 0xbb, 0xb4, 0x89, 0x7e, 0x0a, + 0x78, 0x48, 0x63, 0xf8, 0x3d, 0x79, 0x2f, 0x65, 0x19, 0xd2, 0xf9, 0xbd, + 0x07, 0x65, 0xf0, 0x3d, 0xf9, 0x67, 0x2b, 0x4c, 0xd9, 0xbb, 0x2d, 0x2c, + 0xb4, 0x13, 0x32, 0xb0, 0x89, 0xfb, 0x9c, 0xec, 0x24, 0x61, 0xf8, 0x8f, + 0x80, 0x17, 0x79, 0x95, 0xea, 0x36, 0xf9, 0x66, 0xbb, 0xd7, 0xda, 0x76, + 0xd8, 0x76, 0x38, 0x96, 0x95, 0x56, 0xcf, 0x87, 0xf4, 0x15, 0xda, 0xd7, + 0x23, 0x4e, 0x66, 0xc9, 0xb8, 0xaa, 0x69, 0x8e, 0xf2, 0xd6, 0x95, 0x7e, + 0xd0, 0x49, 0xff, 0x02, 0x5a, 0x33, 0x72, 0xc3, 0xd0, 0xf1, 0x0a, 0x3b, + 0xbe, 0x1a, 0xc3, 0x37, 0xa9, 0x28, 0xf4, 0x21, 0xe5, 0xcd, 0x0e, 0xe3, + 0x9b, 0xcb, 0x43, 0x80, 0x35, 0xfc, 0x3e, 0xa8, 0x6d, 0xce, 0xa7, 0x4b, + 0x94, 0x49, 0xf3, 0xb4, 0x68, 0x7c, 0x97, 0x56, 0xf4, 0x55, 0x6d, 0xaf, + 0xbb, 0x32, 0x60, 0xe6, 0xfc, 0x30, 0xe7, 0x9c, 0xbe, 0x48, 0xfb, 0x03, + 0x03, 0x96, 0xbf, 0x92, 0xa3, 0x79, 0x79, 0xbb, 0x1d, 0xfb, 0x1f, 0x2e, + 0x33, 0x77, 0x8d, 0x73, 0x73, 0x37, 0x50, 0x59, 0x3c, 0x46, 0x91, 0xb6, + 0x07, 0x58, 0xcf, 0x85, 0x8d, 0x94, 0x92, 0x5a, 0x9f, 0xf2, 0x93, 0xb6, + 0x12, 0xd2, 0x27, 0xb6, 0x78, 0x4d, 0xf0, 0x01, 0x9e, 0x5e, 0x62, 0x77, + 0x25, 0xac, 0xdc, 0xa4, 0x1f, 0x1c, 0xf6, 0x91, 0xb7, 0x72, 0x32, 0x8f, + 0xf6, 0x47, 0x9c, 0xfe, 0xca, 0x72, 0xf2, 0x32, 0x94, 0x93, 0x1c, 0x8f, + 0x23, 0x77, 0x3c, 0x48, 0x1e, 0x7d, 0xbf, 0xb6, 0xaf, 0xb7, 0x6e, 0xab, + 0x01, 0xfe, 0x08, 0xc7, 0xcc, 0x1a, 0xa2, 0x33, 0xf7, 0x08, 0x6c, 0x22, + 0x3b, 0x6f, 0xbb, 0xe7, 0xe6, 0x5f, 0xd3, 0x05, 0x7e, 0x33, 0x8e, 0x6a, + 0x68, 0xa4, 0xc6, 0x77, 0x34, 0x2d, 0xd4, 0x2e, 0xb1, 0x65, 0x39, 0x06, + 0xda, 0xb3, 0xb5, 0xc6, 0x16, 0x2c, 0xd1, 0xfe, 0xa4, 0xec, 0xa2, 0xfd, + 0xf9, 0x43, 0xe0, 0x88, 0xe3, 0xe9, 0xb2, 0x69, 0xb4, 0x53, 0x17, 0x8f, + 0x6f, 0xb1, 0xff, 0x48, 0x38, 0x09, 0xb7, 0xa1, 0xad, 0x84, 0x22, 0x6c, + 0x81, 0x0c, 0x80, 0x97, 0x39, 0x07, 0x8a, 0xb6, 0xeb, 0xb6, 0xbf, 0xa8, + 0x31, 0x31, 0xe4, 0xd5, 0xb5, 0x52, 0xcf, 0x3e, 0xc9, 0x7f, 0x7c, 0xaf, + 0xd2, 0xf6, 0xef, 0x52, 0x59, 0x56, 0xad, 0x7b, 0xae, 0x9e, 0xc3, 0x5f, + 0xff, 0x82, 0x39, 0x0a, 0xf1, 0x17, 0xd2, 0x45, 0x35, 0x0e, 0x49, 0x13, + 0x86, 0x16, 0x0c, 0x2d, 0x6e, 0xb4, 0xfa, 0x26, 0xa4, 0xbd, 0xab, 0x40, + 0x7b, 0xf7, 0x81, 0xc6, 0x28, 0xc3, 0x19, 0x97, 0x5b, 0x8b, 0xef, 0x23, + 0xf8, 0x0e, 0xf9, 0xe4, 0x4a, 0x32, 0x9c, 0xf2, 0x9b, 0x75, 0xb2, 0x56, + 0xee, 0x87, 0x7e, 0x2e, 0xeb, 0x70, 0xdc, 0x94, 0xff, 0xff, 0x15, 0xed, + 0xac, 0xad, 0x35, 0xf6, 0xca, 0x8d, 0xb5, 0x94, 0xaf, 0x6b, 0xe4, 0x60, + 0x55, 0xda, 0x95, 0xe4, 0x77, 0xf5, 0x98, 0xd7, 0xff, 0x3f, 0x18, 0x73, + 0x7c, 0xd1, 0x98, 0x3d, 0x3b, 0xe6, 0x77, 0x21, 0xbf, 0xc9, 0xf8, 0x38, + 0x1e, 0xf9, 0x2e, 0x1c, 0xb3, 0xc5, 0x85, 0x1e, 0x57, 0xb5, 0x9c, 0x08, + 0x65, 0x04, 0xc7, 0x35, 0x60, 0xc7, 0xf0, 0xb9, 0xaa, 0x71, 0x0d, 0xbc, + 0x89, 0x71, 0xb5, 0x2e, 0x18, 0xd7, 0xf6, 0x2b, 0x8e, 0x6b, 0x39, 0x1e, + 0x27, 0x2f, 0x87, 0xe3, 0x8b, 0xca, 0xae, 0x22, 0xc7, 0xd8, 0x8f, 0x31, + 0x1e, 0xd4, 0xfe, 0x80, 0x19, 0x63, 0xda, 0x8e, 0x51, 0x54, 0xdb, 0xb6, + 0x7f, 0x8f, 0xdf, 0xd5, 0xe3, 0xa3, 0xee, 0xff, 0x3e, 0x68, 0xba, 0x4e, + 0xb2, 0x5d, 0x75, 0x56, 0xfe, 0xdf, 0x24, 0x1f, 0x2e, 0x71, 0xae, 0x93, + 0x19, 0x91, 0x51, 0xe8, 0xe0, 0xff, 0x5c, 0xcb, 0xd8, 0xfd, 0xf6, 0x94, + 0xd5, 0x63, 0xd0, 0x17, 0x3b, 0x60, 0xf3, 0xf5, 0x17, 0x55, 0x77, 0x44, + 0x82, 0xe0, 0xb6, 0xd4, 0xa7, 0xd1, 0xf7, 0x7e, 0xed, 0xab, 0x2e, 0x8d, + 0x9b, 0x3f, 0x57, 0x2b, 0x3e, 0xed, 0x0d, 0xea, 0x73, 0xe8, 0xbb, 0xe3, + 0xb4, 0xc1, 0xb2, 0xb0, 0x93, 0x33, 0xf1, 0x88, 0xb6, 0xc5, 0xa8, 0x13, + 0x93, 0xf1, 0x8c, 0xa4, 0xd1, 0x5f, 0x26, 0xae, 0x84, 0x7d, 0xc0, 0x56, + 0x83, 0x0d, 0xf9, 0xe1, 0xca, 0x3e, 0x3c, 0x0f, 0xcb, 0xad, 0xb0, 0x77, + 0x6e, 0x7d, 0xe4, 0x0b, 0x72, 0x1b, 0x6c, 0x9d, 0xdb, 0x1e, 0x19, 0x93, + 0xbd, 0xb0, 0x6d, 0xf6, 0xc2, 0xce, 0xd9, 0x5b, 0xa1, 0xed, 0x39, 0x8e, + 0xb2, 0xad, 0x55, 0xb4, 0x46, 0x1b, 0x87, 0xe3, 0x23, 0xee, 0x0f, 0x72, + 0x0e, 0x52, 0x09, 0xf5, 0x8a, 0x9e, 0x97, 0xa6, 0x05, 0x69, 0xaf, 0x27, + 0xab, 0x42, 0xfd, 0xb4, 0xca, 0xc6, 0x8d, 0x8c, 0x0d, 0x78, 0x65, 0xda, + 0x22, 0x8d, 0x78, 0xc0, 0x33, 0xf1, 0x47, 0xda, 0xaa, 0x1e, 0x7f, 0x63, + 0x9d, 0xf8, 0x2b, 0xeb, 0xa4, 0xfe, 0x73, 0x90, 0xaf, 0xd5, 0x34, 0xc5, + 0xb7, 0x67, 0x75, 0x0d, 0x69, 0x8b, 0x32, 0x38, 0xa4, 0x87, 0x8d, 0xaf, + 0x23, 0x7f, 0xaf, 0x48, 0x4f, 0xfb, 0xb9, 0x2e, 0xb3, 0xbb, 0x5b, 0x56, + 0x33, 0x1e, 0x90, 0xad, 0xcc, 0xc7, 0x04, 0x94, 0x5f, 0x1d, 0x13, 0xa0, + 0x9f, 0xf5, 0x01, 0xe0, 0xec, 0x16, 0x3c, 0xfb, 0x64, 0x88, 0x71, 0x87, + 0x4a, 0x68, 0x97, 0x7f, 0xd5, 0xda, 0xe5, 0x21, 0x1c, 0x09, 0xc0, 0x61, + 0xe4, 0xf3, 0x52, 0x3d, 0xb7, 0x50, 0x7f, 0xe7, 0xe7, 0x6c, 0xda, 0x84, + 0xec, 0x2a, 0x71, 0xdc, 0x94, 0xc1, 0xc4, 0x4d, 0xb5, 0x0c, 0x8e, 0x5b, + 0x3b, 0x0a, 0x65, 0xb4, 0xfc, 0x5c, 0x2a, 0x3b, 0x29, 0xf7, 0x18, 0x9f, + 0x7f, 0x20, 0x45, 0x5a, 0x7f, 0xb7, 0x64, 0xe6, 0xe2, 0xf3, 0x02, 0x7a, + 0x93, 0x54, 0x24, 0xad, 0xd7, 0xd3, 0xbc, 0x09, 0xd9, 0x21, 0xbd, 0x31, + 0xc6, 0x3a, 0x19, 0xcf, 0xf3, 0xf3, 0x13, 0xb0, 0x1f, 0x86, 0x4b, 0x0a, + 0x16, 0x7c, 0xad, 0x0c, 0x79, 0x81, 0x6c, 0x4f, 0x39, 0x3a, 0x76, 0x6c, + 0x74, 0x6d, 0xa9, 0xce, 0xd8, 0xae, 0x8e, 0x8e, 0xff, 0xce, 0x80, 0xfa, + 0x66, 0xb4, 0x7d, 0xab, 0xb4, 0xfe, 0x9d, 0xd6, 0x65, 0x46, 0xeb, 0xc2, + 0x38, 0xe6, 0x8c, 0x17, 0xb1, 0xe5, 0xaa, 0xd3, 0xa7, 0xea, 0x42, 0x5b, + 0xb0, 0x50, 0x09, 0xd3, 0x9e, 0x5c, 0x26, 0xed, 0x85, 0x65, 0xd2, 0xfe, + 0x76, 0x99, 0x34, 0x13, 0x17, 0xec, 0x2f, 0x5e, 0x46, 0xde, 0x88, 0xe6, + 0x55, 0x69, 0x36, 0xf6, 0x75, 0x7e, 0xae, 0xcc, 0x2a, 0xeb, 0x97, 0x31, + 0x46, 0x6c, 0x62, 0xc3, 0x39, 0x1d, 0x1b, 0xde, 0xe2, 0x6d, 0x53, 0x8c, + 0x75, 0x11, 0x17, 0x09, 0xd9, 0xab, 0xf1, 0x42, 0x9c, 0x7c, 0x85, 0x31, + 0xe0, 0x3c, 0xd7, 0x5a, 0x13, 0xea, 0x4a, 0xb4, 0x3d, 0x6f, 0x9b, 0x98, + 0x79, 0x8b, 0xe9, 0x75, 0xd5, 0x3e, 0xd8, 0x0a, 0xfd, 0xc5, 0x26, 0xd9, + 0x3e, 0x96, 0x58, 0x41, 0xbd, 0xb5, 0x63, 0xcc, 0xf8, 0x83, 0x7b, 0xc1, + 0x57, 0x19, 0x21, 0x8c, 0xc9, 0x94, 0x08, 0x6d, 0xe2, 0xa5, 0xb6, 0xf0, + 0xeb, 0xb7, 0xd7, 0x7b, 0x85, 0xf6, 0x1c, 0xd8, 0x0e, 0x3f, 0x6b, 0x7b, + 0xf5, 0xd2, 0x37, 0x16, 0xe2, 0x4a, 0xfd, 0x9c, 0xf5, 0x22, 0x57, 0xa8, + 0xa7, 0xed, 0x12, 0x79, 0x66, 0x4e, 0x16, 0x6f, 0x84, 0xcd, 0x24, 0x41, + 0xb6, 0x5b, 0x5a, 0x23, 0xa2, 0x63, 0x3c, 0x29, 0x23, 0x9b, 0x3b, 0xb8, + 0xb6, 0x03, 0xfa, 0x37, 0xb6, 0x8a, 0x89, 0x9b, 0x86, 0x76, 0xca, 0x72, + 0xb4, 0x7b, 0xbd, 0xa5, 0x5d, 0xae, 0xa9, 0xee, 0xa0, 0xcc, 0xc5, 0x9c, + 0x18, 0x3a, 0xde, 0x5e, 0x94, 0x44, 0x48, 0xc7, 0x33, 0xf0, 0x8b, 0xab, + 0xe9, 0x78, 0x46, 0x52, 0x9a, 0x8e, 0x6b, 0x17, 0xd0, 0x71, 0xab, 0xa5, + 0xe3, 0x77, 0x44, 0x0d, 0x5d, 0x28, 0xad, 0xa7, 0x48, 0xa7, 0x86, 0x8e, + 0x1d, 0x4d, 0xc7, 0x33, 0x78, 0xbb, 0x7e, 0x8f, 0x2d, 0x13, 0xb1, 0x69, + 0xfc, 0x1d, 0xa6, 0x51, 0x2e, 0xfe, 0x66, 0xd4, 0xe8, 0xa5, 0x14, 0xe8, + 0x28, 0x4c, 0xff, 0x60, 0xd4, 0xd0, 0x67, 0x75, 0x9a, 0x89, 0x8f, 0xf4, + 0x17, 0xdf, 0x13, 0x5d, 0x48, 0x9f, 0x29, 0xd0, 0x67, 0x58, 0xe6, 0xf5, + 0xe8, 0xb3, 0xde, 0xae, 0x5b, 0x44, 0xf5, 0xba, 0x7b, 0x26, 0x66, 0x68, + 0xf5, 0x56, 0x3d, 0x76, 0x8e, 0xfb, 0xd9, 0x9f, 0x81, 0x56, 0xcd, 0xdc, + 0x9c, 0x9f, 0xf7, 0xb7, 0x19, 0x8b, 0x4a, 0x98, 0x18, 0x36, 0xe3, 0xa4, + 0x57, 0xb2, 0x1d, 0x8d, 0x7c, 0xaa, 0xd1, 0xf2, 0xa9, 0x71, 0x48, 0xa5, + 0xab, 0x65, 0x76, 0x37, 0x74, 0x05, 0x6d, 0x6c, 0x2d, 0xa7, 0x91, 0xd7, + 0x9a, 0xc8, 0x16, 0xff, 0xd9, 0xee, 0x5f, 0xe0, 0xba, 0x80, 0x0c, 0x39, + 0x48, 0x6b, 0x2b, 0x9b, 0x71, 0x29, 0xbf, 0x11, 0xdf, 0xdd, 0xd2, 0x56, + 0x56, 0x72, 0xfb, 0x58, 0x83, 0xec, 0x2b, 0xba, 0xf2, 0x51, 0xd4, 0xff, + 0x48, 0xd1, 0x83, 0x3f, 0x3e, 0x1e, 0xa5, 0x5d, 0xb8, 0xb7, 0xc8, 0xf5, + 0x49, 0xc7, 0xac, 0x19, 0x2d, 0x58, 0xf3, 0x8c, 0x48, 0x5b, 0x47, 0x01, + 0x9e, 0x8a, 0xb8, 0x3b, 0x01, 0x47, 0x5d, 0x3a, 0x2d, 0xaf, 0x74, 0x0f, + 0x38, 0xda, 0x97, 0x70, 0x7a, 0xe4, 0xc6, 0x4a, 0x5a, 0x6e, 0xa8, 0x98, + 0x75, 0xd2, 0xf9, 0x75, 0xd0, 0xa4, 0x37, 0x0d, 0x9d, 0x93, 0xf1, 0x82, + 0xe0, 0x3c, 0xe4, 0xb7, 0x3a, 0xe2, 0x4a, 0xb4, 0x23, 0x19, 0x9f, 0x16, + 0xf3, 0x7d, 0xb1, 0xfc, 0xe3, 0x60, 0x28, 0xe6, 0xca, 0x2b, 0x3e, 0xc7, + 0xd5, 0x23, 0xd7, 0x97, 0xab, 0xfb, 0xe3, 0x5a, 0xe9, 0x13, 0x51, 0xae, + 0x4d, 0x64, 0x2b, 0xe5, 0x28, 0xe3, 0xe7, 0x22, 0x79, 0x69, 0x7b, 0x2b, + 0x7c, 0x37, 0x48, 0xeb, 0xb6, 0xb7, 0x82, 0x56, 0x62, 0xd0, 0xf3, 0x5b, + 0x01, 0xd7, 0x56, 0xc6, 0xbb, 0x18, 0xe7, 0xe2, 0xf7, 0x5f, 0xa2, 0x5f, + 0xd6, 0xfd, 0x5d, 0xbd, 0x66, 0x25, 0x8a, 0x73, 0x6e, 0xf8, 0x65, 0x79, + 0x5d, 0xd3, 0x38, 0x14, 0x4d, 0x8b, 0x13, 0x7d, 0x5b, 0x5c, 0x56, 0xf8, + 0xd5, 0xfd, 0x73, 0xed, 0x57, 0x14, 0x70, 0xe8, 0xee, 0xd8, 0xdc, 0x23, + 0x7d, 0x18, 0x5f, 0xff, 0x92, 0xf1, 0xed, 0x17, 0xc6, 0x54, 0x2f, 0x16, + 0x39, 0x86, 0xf9, 0x71, 0xa9, 0x3f, 0x32, 0xe3, 0x8a, 0x76, 0x2c, 0x1e, + 0x8f, 0xae, 0xaf, 0x4e, 0x01, 0x96, 0xe7, 0xf4, 0x1e, 0x81, 0x20, 0xb8, + 0xa6, 0xe3, 0x62, 0x90, 0x58, 0x97, 0xec, 0x9c, 0x9e, 0x5f, 0xd3, 0x19, + 0x8a, 0xa4, 0x33, 0x1a, 0xff, 0xf8, 0x4e, 0xe4, 0xca, 0xdd, 0x98, 0x3b, + 0x71, 0x73, 0x5d, 0xae, 0xe6, 0x8d, 0x9c, 0xdf, 0x6d, 0xd7, 0xad, 0x42, + 0xbf, 0x29, 0x08, 0x94, 0xbf, 0x58, 0x56, 0x50, 0x47, 0x61, 0xec, 0xb2, + 0xdb, 0xee, 0x4b, 0x49, 0x31, 0x6e, 0x38, 0xe4, 0xa6, 0xa3, 0x89, 0x42, + 0xb9, 0x0b, 0xbf, 0x1b, 0xf0, 0xfe, 0x45, 0xd8, 0x28, 0x3d, 0xb0, 0x61, + 0x24, 0xa6, 0x8c, 0x3c, 0x00, 0xfd, 0x76, 0xe4, 0x95, 0x22, 0x3f, 0x7a, + 0x89, 0xe1, 0x72, 0x2c, 0x31, 0x5a, 0xde, 0xcb, 0xfa, 0x28, 0x7b, 0xa5, + 0xf8, 0x1d, 0xfb, 0x62, 0x1f, 0xf4, 0x79, 0x7f, 0x96, 0x3e, 0x5c, 0xdb, + 0x36, 0xdb, 0x0c, 0xf1, 0xe2, 0xd2, 0x0d, 0xc7, 0xbf, 0x6e, 0xeb, 0x8f, + 0x70, 0x7c, 0x7b, 0x2d, 0xdc, 0x8b, 0xfb, 0x7d, 0x49, 0xdb, 0x2c, 0x8f, + 0x55, 0x68, 0x27, 0x72, 0x4d, 0x27, 0x79, 0x62, 0x5c, 0x08, 0x47, 0x10, + 0x5c, 0x48, 0x19, 0x7d, 0xfd, 0x74, 0x85, 0xeb, 0x1a, 0x41, 0xf0, 0x5d, + 0xda, 0xc2, 0x83, 0x25, 0xf4, 0x17, 0xe2, 0x60, 0x63, 0xde, 0x85, 0x2c, + 0x1c, 0xe9, 0x26, 0x7e, 0x05, 0x5e, 0x69, 0x87, 0xb7, 0x4b, 0xa2, 0x89, + 0xdf, 0x2e, 0x37, 0x24, 0x3e, 0x51, 0xf6, 0x80, 0x67, 0x8e, 0x3b, 0x96, + 0xd8, 0x63, 0xc7, 0xcc, 0xfd, 0x20, 0xaf, 0xbf, 0x4f, 0xe3, 0xa5, 0x05, + 0x3e, 0x12, 0x61, 0x9a, 0x87, 0x85, 0xb0, 0x25, 0x2c, 0x6e, 0x82, 0xe0, + 0xfb, 0x29, 0xf6, 0xd9, 0xcd, 0xfd, 0x00, 0x23, 0xe8, 0x37, 0xbf, 0x56, + 0x11, 0x0f, 0xd1, 0xc4, 0x1d, 0xe8, 0xfb, 0xb7, 0xd1, 0xf7, 0xbe, 0x32, + 0xfb, 0x83, 0x7c, 0xc0, 0xd8, 0x47, 0x2a, 0x21, 0xbc, 0xcb, 0xf5, 0x1d, + 0xce, 0x79, 0xa7, 0xb5, 0xeb, 0xc2, 0x6f, 0x8d, 0x48, 0x4f, 0xc1, 0x97, + 0xcb, 0x56, 0x66, 0xd6, 0xb8, 0xf2, 0x2e, 0xc8, 0xda, 0x40, 0x4e, 0x42, + 0x86, 0xcd, 0x68, 0xba, 0xc9, 0xae, 0xe7, 0xff, 0x11, 0xf9, 0xe4, 0x0a, + 0xc6, 0x94, 0x7b, 0x7d, 0xda, 0xab, 0xb3, 0xc1, 0x8c, 0x4f, 0x99, 0xbc, + 0x4a, 0xc6, 0xbd, 0x7c, 0x27, 0xf4, 0x03, 0xd2, 0x1a, 0xe9, 0x63, 0x27, + 0xb2, 0x91, 0x64, 0x62, 0x58, 0xb8, 0xc7, 0x89, 0xfb, 0x13, 0xb8, 0xef, + 0x87, 0xf2, 0xc0, 0x85, 0x9c, 0xe3, 0x1c, 0x9a, 0xfe, 0x86, 0xcb, 0xf3, + 0x65, 0x0f, 0x08, 0xd7, 0x09, 0x93, 0xf1, 0xbd, 0xda, 0x26, 0x01, 0xd5, + 0x15, 0x59, 0x76, 0x33, 0x2c, 0x12, 0xbf, 0xaa, 0xbc, 0xde, 0x73, 0x05, + 0x3e, 0x67, 0x1c, 0x21, 0x1a, 0xcd, 0x16, 0xe5, 0xb5, 0x48, 0xb7, 0xbc, + 0x96, 0x4d, 0xd5, 0x4b, 0xaf, 0x96, 0xf9, 0xcc, 0xd3, 0xe9, 0xb3, 0x26, + 0xdd, 0x85, 0x2e, 0xe1, 0x9c, 0xf4, 0x40, 0x46, 0x4f, 0x00, 0x6e, 0xe2, + 0xb0, 0x87, 0x32, 0x89, 0xf3, 0xa7, 0x54, 0x3a, 0x16, 0xcd, 0x95, 0xa5, + 0x2f, 0x57, 0xb4, 0xb1, 0x9e, 0x01, 0x8e, 0x7f, 0x95, 0xc5, 0x43, 0xa3, + 0xb8, 0x80, 0xad, 0x2f, 0x92, 0x70, 0xe0, 0x2b, 0x43, 0xd7, 0x3f, 0xba, + 0x4a, 0x1a, 0x89, 0x9b, 0x1e, 0xf0, 0x52, 0x0d, 0x74, 0xd1, 0xfd, 0xcd, + 0x5c, 0x37, 0xd5, 0x36, 0x64, 0xec, 0x63, 0xbf, 0xac, 0xd2, 0x7f, 0x1b, + 0x57, 0xe9, 0x51, 0x2b, 0x2f, 0xa3, 0x7d, 0x94, 0x97, 0x4f, 0x97, 0x08, + 0x8f, 0x78, 0x11, 0x3f, 0xd1, 0xd7, 0x5b, 0x16, 0x15, 0x49, 0x7b, 0xd1, + 0xde, 0xf2, 0x42, 0xfa, 0x7f, 0xba, 0xf2, 0x61, 0x6b, 0x0b, 0x56, 0xc7, + 0x54, 0xab, 0xf3, 0xc8, 0x83, 0xcb, 0xe5, 0x11, 0x26, 0x89, 0xae, 0x48, + 0x5f, 0xf8, 0x54, 0x7b, 0x47, 0xde, 0xab, 0x15, 0xe2, 0x39, 0x80, 0xdc, + 0x06, 0xae, 0xcb, 0x5c, 0xaf, 0xde, 0x8f, 0x79, 0xfb, 0x3f, 0x41, 0x26, + 0xc6, 0x7c, 0x4f, 0xea, 0xe0, 0xdb, 0xbe, 0x0c, 0xdd, 0xf9, 0x8a, 0x7f, + 0xe1, 0x53, 0x9d, 0x1d, 0x41, 0xf0, 0xac, 0x9f, 0x4f, 0xb8, 0x90, 0x1f, + 0x87, 0x2d, 0xbe, 0x87, 0x81, 0xef, 0x89, 0x39, 0x7c, 0x27, 0xe4, 0x62, + 0xd7, 0xf7, 0x03, 0xae, 0xf5, 0x0d, 0x97, 0x6f, 0xbd, 0x55, 0xa5, 0x3f, + 0xfe, 0xa1, 0x6c, 0x37, 0xfb, 0x1b, 0x91, 0xc3, 0x95, 0x9b, 0x88, 0xbf, + 0x28, 0xc6, 0x7a, 0x4f, 0x9f, 0x6f, 0xfa, 0xed, 0x5b, 0xd0, 0x2f, 0xe9, + 0xe5, 0x47, 0xac, 0x8b, 0x32, 0xd5, 0x75, 0x33, 0xa0, 0xcb, 0xbc, 0xad, + 0x3b, 0x70, 0x85, 0xba, 0xde, 0x15, 0xea, 0x1e, 0x46, 0xdd, 0x3d, 0xb6, + 0xee, 0x85, 0xcf, 0xbc, 0xb9, 0x7e, 0x07, 0xb8, 0xc7, 0x0e, 0x3e, 0x80, + 0xb8, 0x11, 0xff, 0x36, 0xfc, 0xbe, 0x85, 0xed, 0x28, 0xda, 0xf7, 0x23, + 0x95, 0x21, 0x19, 0xae, 0xec, 0xc4, 0x33, 0x88, 0xb4, 0x3e, 0x3c, 0xfb, + 0xf0, 0x3b, 0x8d, 0x47, 0xa2, 0x6e, 0xfa, 0xc2, 0x5d, 0xc3, 0x7e, 0x88, + 0x57, 0xae, 0xcd, 0xb3, 0x0f, 0xd8, 0x17, 0x5d, 0x3f, 0x41, 0x1f, 0x61, + 0xfa, 0x07, 0x50, 0x67, 0x1a, 0x69, 0x2b, 0x69, 0x7b, 0x62, 0xae, 0xab, + 0xeb, 0x54, 0xc3, 0x36, 0x1d, 0xce, 0x05, 0xf2, 0x0d, 0x8d, 0xf6, 0x16, + 0x43, 0x18, 0xef, 0x44, 0x1b, 0xe3, 0x57, 0x29, 0xff, 0x1e, 0xc2, 0x15, + 0x57, 0xfe, 0xc7, 0xf0, 0x7e, 0x2d, 0xd8, 0x9d, 0x62, 0x4c, 0x9e, 0xf3, + 0x7e, 0xdd, 0xaa, 0xa5, 0x7b, 0x9f, 0x42, 0x1a, 0xe8, 0x84, 0x4e, 0x69, + 0xb0, 0x74, 0x5a, 0x80, 0xe5, 0x43, 0x1a, 0xe5, 0x98, 0x17, 0x97, 0x4d, + 0x76, 0xe6, 0xa5, 0x07, 0xba, 0x8c, 0xb2, 0xf6, 0xd3, 0xf5, 0x26, 0x0e, + 0x03, 0xcb, 0xd1, 0xef, 0x04, 0x3d, 0x37, 0x88, 0x87, 0xfa, 0x03, 0x11, + 0x0f, 0x34, 0x18, 0xd6, 0x4f, 0x7a, 0x03, 0x11, 0x8e, 0x19, 0x1c, 0x5f, + 0xe6, 0xba, 0x34, 0x6d, 0x6b, 0xd6, 0x0f, 0x6d, 0x1c, 0xfe, 0x7b, 0x59, + 0xc4, 0x67, 0x1a, 0xdb, 0x0b, 0xde, 0x55, 0xe3, 0x2f, 0x59, 0x63, 0xc1, + 0x38, 0xf3, 0x49, 0x68, 0x30, 0xaf, 0x4f, 0xcb, 0xe9, 0xfc, 0x35, 0x35, + 0xd2, 0xe0, 0xf5, 0xeb, 0xdf, 0x2c, 0xd3, 0xe0, 0x81, 0x4f, 0x17, 0x95, + 0x61, 0x1a, 0xf3, 0x0a, 0x6b, 0x94, 0xde, 0xab, 0xa4, 0xf7, 0x28, 0xc9, + 0x83, 0xa9, 0x64, 0x62, 0x48, 0x25, 0xbd, 0x71, 0xd9, 0x0f, 0xb9, 0x43, + 0x39, 0x39, 0x73, 0x7f, 0x44, 0xb8, 0x9f, 0xef, 0x5d, 0x92, 0xf5, 0x29, + 0x3f, 0x0b, 0x9f, 0x57, 0x94, 0x75, 0x95, 0x97, 0x1a, 0xcc, 0xd8, 0xb8, + 0x0f, 0x01, 0x70, 0x36, 0xd1, 0x86, 0xbb, 0xb5, 0x81, 0x3c, 0x94, 0x50, + 0x11, 0xd9, 0x45, 0x3f, 0x5f, 0x7d, 0xb1, 0x5e, 0xea, 0xa7, 0xd7, 0x78, + 0x52, 0xd1, 0xe9, 0x66, 0x7f, 0x60, 0xb2, 0x73, 0x48, 0x89, 0x1e, 0x7b, + 0x46, 0xbd, 0x91, 0xcc, 0x9e, 0xb5, 0xfa, 0x23, 0x90, 0xc7, 0xb4, 0xbe, + 0x98, 0xf9, 0xbc, 0x2b, 0x17, 0x82, 0xb6, 0x4d, 0x17, 0xda, 0xb3, 0x5d, + 0xb4, 0x73, 0x57, 0xd9, 0xfd, 0x95, 0x8c, 0x63, 0xbd, 0x4b, 0x9e, 0xf3, + 0x0b, 0x18, 0xf7, 0x7e, 0xb9, 0xe0, 0xb3, 0xbf, 0x99, 0xcf, 0x79, 0xc2, + 0x74, 0xc2, 0x6e, 0xfa, 0x13, 0xf5, 0xa7, 0x80, 0x87, 0x7d, 0x52, 0x07, + 0x5f, 0xc9, 0xee, 0x4b, 0x0e, 0xe4, 0x45, 0xcf, 0x4b, 0x8f, 0xa0, 0xad, + 0x15, 0x3e, 0xf8, 0x10, 0x76, 0x73, 0xcd, 0x91, 0xab, 0x21, 0x77, 0x1d, + 0xbd, 0xc7, 0x02, 0x93, 0xe1, 0x4d, 0x61, 0xde, 0x33, 0x03, 0x2c, 0x57, + 0x2f, 0xd3, 0x31, 0xf2, 0xba, 0xe6, 0x97, 0x4f, 0x65, 0xfd, 0x76, 0x4f, + 0x39, 0xc3, 0x8c, 0x31, 0x00, 0xaf, 0xa4, 0xcd, 0x54, 0x6c, 0xbb, 0xcf, + 0xb6, 0x58, 0xe6, 0x2a, 0xf9, 0xf6, 0xc0, 0x85, 0x7f, 0x78, 0xd6, 0xff, + 0x7b, 0xc0, 0x91, 0x81, 0x4c, 0xe0, 0xf3, 0x6a, 0x90, 0x8f, 0x31, 0xa6, + 0xf5, 0xbf, 0xeb, 0xad, 0x9d, 0xac, 0x79, 0x7f, 0x58, 0xef, 0x93, 0x79, + 0xfe, 0x33, 0x59, 0xae, 0x77, 0xc0, 0x36, 0xc9, 0x69, 0xb9, 0x18, 0xfd, + 0x69, 0x0e, 0xf0, 0x14, 0x2a, 0xb4, 0x43, 0xfe, 0x06, 0x76, 0x88, 0xd6, + 0x93, 0xf2, 0xed, 0x41, 0xe6, 0xb1, 0xdd, 0xec, 0xd5, 0xae, 0xd6, 0x0b, + 0x21, 0x2c, 0xc9, 0xce, 0x1c, 0xf2, 0x47, 0xb4, 0x1d, 0xef, 0xc9, 0xac, + 0xe7, 0xea, 0x7d, 0x27, 0xf9, 0xc1, 0x20, 0x78, 0xc5, 0x77, 0xe5, 0xa4, + 0x86, 0xf9, 0x05, 0xf4, 0xe1, 0xc8, 0xc4, 0x80, 0xfb, 0xd3, 0x93, 0x3e, + 0xc7, 0xc7, 0x3c, 0xae, 0x2b, 0x6d, 0x8e, 0x1b, 0xf8, 0x68, 0x9b, 0x7e, + 0x2f, 0x98, 0x8d, 0x71, 0xdd, 0x02, 0x3c, 0x5d, 0x6a, 0xf7, 0x6e, 0x90, + 0xdb, 0xe6, 0x6c, 0x9a, 0x69, 0x31, 0x36, 0xa3, 0xd1, 0x69, 0x17, 0xfe, + 0x61, 0xc4, 0xbf, 0xb0, 0xba, 0x80, 0xb9, 0x81, 0x0e, 0x5b, 0x0c, 0x4b, + 0x8a, 0xb0, 0x0c, 0x6b, 0x58, 0x62, 0xc0, 0xa5, 0x0b, 0xd9, 0x77, 0x9b, + 0x1c, 0x02, 0xde, 0x87, 0x06, 0x45, 0x9e, 0x85, 0x4d, 0x76, 0xbe, 0x0a, + 0x9e, 0x19, 0xc0, 0x73, 0xde, 0xe7, 0x5e, 0x00, 0xe6, 0xf9, 0xde, 0xb0, + 0x70, 0x2f, 0x00, 0x71, 0xd8, 0x81, 0xdf, 0x22, 0x33, 0xd0, 0xbf, 0x27, + 0xfd, 0xd7, 0x82, 0xf1, 0x18, 0x75, 0x23, 0xda, 0x99, 0xdb, 0x1b, 0x14, + 0xc8, 0xe7, 0x53, 0xd4, 0x43, 0xb5, 0xd2, 0xb6, 0x8e, 0x7e, 0x88, 0x91, + 0x9f, 0x37, 0xf8, 0x19, 0xf4, 0xf5, 0x5b, 0x2b, 0xa5, 0x3e, 0x2f, 0xfd, + 0x1d, 0x75, 0xc8, 0x73, 0x6d, 0xde, 0x80, 0xce, 0xeb, 0xef, 0x38, 0x8c, + 0xfc, 0x8f, 0xaf, 0x64, 0xbc, 0xdb, 0xf5, 0xd7, 0x4b, 0xdb, 0x1a, 0xe6, + 0x55, 0xf3, 0xe0, 0xab, 0xdc, 0x83, 0x69, 0x75, 0x38, 0x64, 0x59, 0x29, + 0xef, 0x71, 0xa7, 0xdd, 0x21, 0xcc, 0xc5, 0x6e, 0x9f, 0xb2, 0xed, 0xbf, + 0xa3, 0x6e, 0x4a, 0x6e, 0xf4, 0x07, 0x91, 0x37, 0x8d, 0xbc, 0xc3, 0x36, + 0x6f, 0xd0, 0xe6, 0x6d, 0x43, 0xde, 0x3e, 0xe0, 0xef, 0x6e, 0x9d, 0x9e, + 0xe5, 0x6f, 0x53, 0xc7, 0x5b, 0xd9, 0x71, 0xe1, 0x33, 0x37, 0xf8, 0x84, + 0x0b, 0x79, 0x25, 0xae, 0x8b, 0xde, 0x26, 0x79, 0x2f, 0x79, 0x0b, 0x7b, + 0xfd, 0x66, 0xb1, 0x0e, 0xb2, 0x89, 0x7b, 0x80, 0x69, 0xb3, 0x6e, 0xf1, + 0x5e, 0x96, 0xff, 0x40, 0xba, 0xeb, 0xc9, 0x38, 0x5f, 0x5b, 0xc9, 0xb8, + 0xd8, 0x88, 0x4f, 0xfb, 0x3a, 0x90, 0x9c, 0x5e, 0x3f, 0xa1, 0x7f, 0x5b, + 0x44, 0x3a, 0xe9, 0x41, 0x35, 0x45, 0xf4, 0x3e, 0x2d, 0x7e, 0x47, 0x61, + 0xf7, 0x06, 0x42, 0x9f, 0x8f, 0x36, 0x5d, 0xc6, 0xe3, 0xda, 0x50, 0x98, + 0xe7, 0x21, 0x4f, 0x6d, 0x8a, 0xc0, 0x26, 0xaa, 0xf5, 0x1d, 0x1d, 0xa3, + 0x2e, 0xe8, 0x75, 0x00, 0xc6, 0xdf, 0x32, 0xf0, 0x63, 0x02, 0xe9, 0x47, + 0xdf, 0xa4, 0xfd, 0x68, 0x87, 0xef, 0x1d, 0x10, 0xee, 0x67, 0x65, 0x7a, + 0xbb, 0xf7, 0x6d, 0x99, 0xa7, 0xf3, 0x19, 0x49, 0x66, 0x94, 0x03, 0xff, + 0x75, 0xab, 0x23, 0xf5, 0xb0, 0x3d, 0x6e, 0x30, 0xfa, 0xcd, 0xe3, 0x9e, + 0xc4, 0x8b, 0xda, 0x56, 0x6b, 0xb4, 0xf3, 0x91, 0x05, 0x6e, 0xb8, 0x1f, + 0x7c, 0xe0, 0x9e, 0xdd, 0x7e, 0x21, 0x09, 0x6a, 0xd4, 0xba, 0x71, 0x18, + 0xb4, 0x91, 0x4d, 0x19, 0xdd, 0x78, 0xc3, 0x9c, 0x6e, 0xfc, 0xf3, 0x95, + 0xe4, 0x89, 0xe1, 0x72, 0x1c, 0x75, 0xf5, 0x3a, 0x4a, 0x82, 0x75, 0x6b, + 0x31, 0x9f, 0xe7, 0xfd, 0xec, 0x35, 0xa0, 0x2f, 0xc8, 0xe1, 0x64, 0xe7, + 0x29, 0xd4, 0x2d, 0xa0, 0xee, 0xe4, 0x5c, 0x5d, 0x47, 0x46, 0x7c, 0xbd, + 0xef, 0x59, 0x26, 0xcb, 0x21, 0x1d, 0x26, 0xe3, 0xb7, 0x6a, 0x5e, 0xe0, + 0x7e, 0x30, 0x37, 0x71, 0x9f, 0x6c, 0xd6, 0xb4, 0xdd, 0x27, 0xdc, 0x27, + 0xc5, 0xb6, 0xef, 0x0b, 0xda, 0xd6, 0x10, 0xbe, 0x12, 0xde, 0xa4, 0x8d, + 0x31, 0xbc, 0xc3, 0xf9, 0x37, 0xf3, 0x3e, 0xe4, 0x10, 0xdf, 0xbf, 0x1f, + 0xe4, 0x07, 0x39, 0x2f, 0xfc, 0x9e, 0xa7, 0xb9, 0x11, 0xd0, 0x5c, 0xc4, + 0x7f, 0xbb, 0x0c, 0xeb, 0x3d, 0x10, 0x29, 0x99, 0xd0, 0xf1, 0xcc, 0x0b, + 0xc1, 0x23, 0x0b, 0xe4, 0xf8, 0x47, 0x94, 0xa1, 0x21, 0xfe, 0x2e, 0x24, + 0xea, 0x64, 0x66, 0x4d, 0x9d, 0xde, 0xf1, 0x41, 0x7c, 0x8c, 0xde, 0x73, + 0x3b, 0xf8, 0xf5, 0xfa, 0xb9, 0xb1, 0x00, 0xdf, 0xc0, 0xe3, 0x4e, 0x63, + 0xeb, 0x63, 0x1c, 0x19, 0xed, 0xbf, 0x67, 0x8b, 0x4a, 0xef, 0x0b, 0xa2, + 0x8e, 0x3f, 0x00, 0x9d, 0x6a, 0xf6, 0xa4, 0xe0, 0x5d, 0xe1, 0xbc, 0x29, + 0xed, 0x73, 0x1c, 0x04, 0x0f, 0x1f, 0xf4, 0xb3, 0x6b, 0x6a, 0x75, 0xdb, + 0x49, 0xef, 0x7a, 0x6d, 0x13, 0x6e, 0x94, 0x99, 0x14, 0xdb, 0x23, 0x5e, + 0xfe, 0x47, 0x30, 0xe4, 0xcd, 0xa0, 0x7f, 0x43, 0xff, 0x59, 0x5f, 0xb5, + 0xd4, 0x49, 0xf5, 0x3e, 0x53, 0xe2, 0xc9, 0x85, 0xbd, 0xd2, 0x01, 0xfc, + 0x18, 0x78, 0x73, 0xe5, 0xb7, 0x49, 0x21, 0xe6, 0xda, 0xb1, 0x45, 0xb4, + 0x2f, 0x37, 0x91, 0xaa, 0x83, 0x2d, 0xf8, 0x17, 0xc1, 0xe4, 0x82, 0x31, + 0x1e, 0xac, 0x1a, 0xe3, 0x4c, 0x02, 0xd8, 0x68, 0x89, 0xcc, 0xc9, 0x01, + 0xf6, 0x65, 0x64, 0x52, 0x38, 0xc6, 0x3a, 0x8c, 0x71, 0xc7, 0xdc, 0x18, + 0x0f, 0x2f, 0x1a, 0xe3, 0x61, 0x8c, 0x11, 0xf6, 0x42, 0x29, 0xd3, 0xe9, + 0xce, 0xcf, 0xfb, 0xd5, 0x35, 0x73, 0xf3, 0x29, 0xdc, 0xeb, 0x84, 0xf1, + 0xd3, 0xa6, 0xd8, 0x08, 0x78, 0x74, 0x5b, 0x90, 0x71, 0x0e, 0x64, 0x5b, + 0x76, 0x4d, 0x8d, 0x1d, 0xff, 0x76, 0x96, 0x2b, 0x1b, 0x1c, 0x9c, 0x4c, + 0xb9, 0x9d, 0x8f, 0xa0, 0xbf, 0xbd, 0x76, 0x5c, 0xbd, 0xe5, 0xab, 0x31, + 0xae, 0x0b, 0xdf, 0xc1, 0x18, 0xe0, 0xb3, 0x9d, 0xa0, 0x0f, 0x9c, 0x18, + 0x92, 0x05, 0xb2, 0xeb, 0x33, 0xf3, 0x72, 0xd4, 0xc0, 0x4c, 0xdb, 0xba, + 0x30, 0x07, 0xf3, 0xdd, 0x8b, 0x60, 0xbe, 0x1b, 0x30, 0xef, 0xb3, 0xf3, + 0xb2, 0xaf, 0x6a, 0xcf, 0x62, 0x48, 0x47, 0xfc, 0xfd, 0xbc, 0xf5, 0x45, + 0x3e, 0x20, 0xf7, 0x97, 0x3a, 0xe5, 0xcb, 0x95, 0xe4, 0x59, 0xc6, 0xd1, + 0xcf, 0x55, 0x92, 0xe3, 0x22, 0x5d, 0xf2, 0xc7, 0xb0, 0x73, 0xae, 0x82, + 0x6f, 0xf1, 0x34, 0xfc, 0xd7, 0x3f, 0xa9, 0xf8, 0xf2, 0xc4, 0xdc, 0x7e, + 0x38, 0xea, 0xba, 0xb4, 0x9c, 0x84, 0x4f, 0xbb, 0xed, 0x68, 0x1b, 0xf7, + 0x2a, 0x11, 0xbe, 0xbb, 0xa8, 0x73, 0xda, 0x94, 0xe6, 0xc5, 0xef, 0x62, + 0xbc, 0xa7, 0xa9, 0x6b, 0xd6, 0xfa, 0xbe, 0x77, 0xb3, 0x5a, 0x47, 0x99, + 0x90, 0xff, 0x5a, 0xe4, 0x03, 0xf5, 0x26, 0xc6, 0x92, 0xf1, 0x9a, 0xc9, + 0x1b, 0xdb, 0x3a, 0x12, 0x7d, 0x42, 0x5b, 0x82, 0xfe, 0x36, 0x6c, 0xa1, + 0xd2, 0xe6, 0xf8, 0x5a, 0xa1, 0x4c, 0xa2, 0x5d, 0x94, 0x96, 0x09, 0xc0, + 0x3e, 0x06, 0x89, 0x50, 0x68, 0xf6, 0x47, 0x7b, 0xd5, 0x44, 0x03, 0x79, + 0x70, 0xdb, 0x19, 0xd0, 0xd7, 0x36, 0x8c, 0xa9, 0x2b, 0x79, 0x76, 0x46, + 0x65, 0x4e, 0xac, 0x95, 0x57, 0x82, 0xa1, 0x66, 0x47, 0x9e, 0xd8, 0xc4, + 0x3c, 0x2d, 0xb7, 0x3f, 0xd5, 0x0b, 0xf9, 0xd4, 0xce, 0x73, 0x0b, 0x03, + 0xf2, 0x2f, 0x77, 0x80, 0x06, 0x7f, 0xb8, 0xe9, 0x6b, 0xc1, 0x6c, 0xb3, + 0x2b, 0x5b, 0x37, 0x25, 0xbd, 0xbc, 0xc2, 0x78, 0x4a, 0x18, 0x4f, 0x09, + 0xe3, 0xe3, 0x98, 0x4b, 0x18, 0xd7, 0x15, 0xf7, 0x4a, 0xf5, 0x2c, 0x88, + 0xcb, 0x1a, 0x3f, 0x2d, 0x93, 0x77, 0x65, 0x83, 0xdd, 0x2b, 0x35, 0x5c, + 0x1f, 0xae, 0xb1, 0x65, 0x64, 0x3c, 0x28, 0xf8, 0x7f, 0x70, 0x55, 0xb6, + 0x2b, 0xb6, 0x58, 0xe7, 0xdc, 0x35, 0xaf, 0x73, 0x44, 0x9e, 0x33, 0xf3, + 0x86, 0x39, 0xf3, 0xbd, 0x49, 0x6e, 0x86, 0x87, 0x0e, 0xdc, 0xaa, 0xf7, + 0x3c, 0x77, 0xe0, 0x9b, 0x36, 0xd5, 0xa7, 0xf5, 0x3a, 0xe2, 0x4c, 0xf9, + 0x1e, 0x3b, 0x77, 0xf7, 0x68, 0x3d, 0xbb, 0x75, 0xd3, 0xa5, 0x80, 0xfb, + 0xdc, 0xbc, 0x4d, 0xcb, 0xc5, 0x22, 0x68, 0xef, 0xd5, 0x69, 0xde, 0xe7, + 0x7a, 0x76, 0x41, 0x9f, 0x13, 0x01, 0xde, 0xe6, 0xe2, 0x62, 0xf5, 0x48, + 0xa3, 0xbe, 0xf8, 0x69, 0x83, 0x59, 0x47, 0xa5, 0x6c, 0x58, 0x83, 0x34, + 0xd7, 0xec, 0x05, 0x5e, 0x90, 0xf7, 0xdf, 0xea, 0xcd, 0x9e, 0x8f, 0xea, + 0xb2, 0xe0, 0x31, 0xbd, 0x2f, 0x84, 0xfb, 0x03, 0x7f, 0x79, 0xa5, 0xb1, + 0x4d, 0xc3, 0x7c, 0xa6, 0xff, 0x38, 0x98, 0xd0, 0x31, 0x36, 0xf6, 0xf5, + 0x43, 0xfc, 0x5e, 0xbc, 0x5f, 0x24, 0xb4, 0x5d, 0xeb, 0x40, 0xf7, 0xda, + 0x5f, 0x16, 0x94, 0x89, 0xe7, 0x25, 0x22, 0x13, 0x55, 0x30, 0x4e, 0x10, + 0xee, 0x52, 0xd7, 0xaa, 0xf9, 0xd8, 0xdd, 0x6a, 0xa4, 0x11, 0xc6, 0x75, + 0x8b, 0xf2, 0xc8, 0x1b, 0xad, 0x2b, 0x49, 0x37, 0xd3, 0xc2, 0xb4, 0xf9, + 0x31, 0xcd, 0x68, 0xfb, 0xb9, 0x6d, 0x95, 0xde, 0xfb, 0xc4, 0x35, 0x46, + 0xc6, 0x08, 0x63, 0x26, 0xdf, 0xf5, 0xff, 0x56, 0xd7, 0x19, 0x9a, 0xab, + 0xa3, 0xe7, 0x02, 0xf9, 0x6e, 0x55, 0x5e, 0x35, 0xdc, 0xd4, 0x5f, 0x43, + 0x9d, 0x75, 0xd0, 0x89, 0x17, 0x53, 0xab, 0xc3, 0xbd, 0xf0, 0xb0, 0x21, + 0xb2, 0xd7, 0xd4, 0x5a, 0x99, 0x3f, 0x81, 0x79, 0x7d, 0x26, 0x65, 0x78, + 0x51, 0xf3, 0x61, 0xf1, 0x36, 0xf8, 0xeb, 0xa1, 0xde, 0xa0, 0x9c, 0x26, + 0x6f, 0x22, 0xad, 0x42, 0x9f, 0xe0, 0xc2, 0xea, 0x99, 0xae, 0x57, 0x03, + 0xee, 0xb3, 0x7c, 0x45, 0xdb, 0x51, 0x43, 0xb2, 0xb0, 0xed, 0xd1, 0x7b, + 0x5e, 0xbf, 0xed, 0xa1, 0x65, 0xda, 0x1e, 0xb2, 0x6d, 0x8b, 0x6b, 0xda, + 0x8e, 0x5e, 0xa1, 0xed, 0x81, 0x37, 0x68, 0x7b, 0x70, 0x99, 0xb6, 0x07, + 0xc3, 0xb6, 0x95, 0x69, 0xdb, 0x0b, 0xdb, 0x4e, 0x2c, 0xc2, 0xc9, 0x67, + 0x5e, 0xbf, 0xed, 0x7d, 0xcb, 0xb4, 0xbd, 0x6f, 0x11, 0xdc, 0xc4, 0x49, + 0x2d, 0x74, 0xff, 0x3d, 0xda, 0xe6, 0xac, 0x03, 0xdf, 0x5c, 0x84, 0xfc, + 0x36, 0xfe, 0xc8, 0x85, 0xbb, 0x66, 0xcb, 0xe0, 0x2b, 0xf8, 0xd7, 0x99, + 0x72, 0x03, 0x9e, 0x71, 0xd8, 0x33, 0x28, 0x07, 0x7b, 0xbc, 0x26, 0x1d, + 0xc8, 0xc9, 0x6e, 0x96, 0xcd, 0xc7, 0x6b, 0xe7, 0xf4, 0xc6, 0x3d, 0xe8, + 0x8f, 0x6d, 0xfb, 0x5e, 0xbf, 0xbc, 0xa6, 0xfb, 0xcb, 0x95, 0xe9, 0x8f, + 0x21, 0xbd, 0x42, 0x1f, 0x97, 0xf5, 0x42, 0x19, 0x58, 0x67, 0xd7, 0x3e, + 0x68, 0x6b, 0x32, 0x0e, 0xa7, 0xed, 0x51, 0x29, 0x94, 0x7f, 0x12, 0x4c, + 0x83, 0x2e, 0x46, 0xe6, 0x74, 0xc8, 0x93, 0xab, 0x68, 0xb3, 0x8f, 0x53, + 0xb3, 0x54, 0xc5, 0xa0, 0x46, 0x7c, 0xa6, 0xfd, 0x98, 0x6d, 0xc2, 0x0e, + 0x0c, 0xcb, 0x32, 0x6e, 0x6c, 0x62, 0x4e, 0x67, 0x21, 0x33, 0xcd, 0x9e, + 0x0e, 0xfa, 0x2a, 0x4f, 0x81, 0x97, 0xf7, 0x43, 0x76, 0x24, 0xf3, 0x22, + 0x3d, 0x8d, 0xe6, 0xac, 0x45, 0x4c, 0x72, 0x5d, 0xbf, 0x69, 0xf1, 0xb8, + 0xef, 0xce, 0xe5, 0xcf, 0x59, 0x40, 0x3e, 0x38, 0x94, 0x91, 0xd7, 0x37, + 0x9a, 0x75, 0xbb, 0xb7, 0x36, 0x32, 0x1e, 0xa3, 0x36, 0x75, 0xaf, 0xd6, + 0xf2, 0xc7, 0x09, 0xbf, 0xbf, 0xb2, 0xe8, 0x3b, 0xac, 0xf7, 0x93, 0xd5, + 0x0b, 0xeb, 0x85, 0xe9, 0x70, 0x4d, 0x16, 0xa4, 0x1f, 0x58, 0xb3, 0xb0, + 0x7e, 0xac, 0x69, 0xe1, 0xf7, 0xe0, 0xa2, 0xef, 0xcf, 0x2c, 0xfa, 0x7e, + 0x61, 0xd1, 0xf7, 0x75, 0x6b, 0x17, 0x95, 0x5f, 0xf4, 0xfd, 0xe5, 0xb5, + 0xcb, 0xc3, 0xfb, 0x57, 0x6b, 0x17, 0xc2, 0xf5, 0x94, 0x5e, 0x73, 0x1d, + 0xaf, 0xb8, 0xb2, 0xbd, 0x88, 0x7c, 0xe7, 0xd6, 0x18, 0xf2, 0xe1, 0xcb, + 0x54, 0xe7, 0x73, 0x8d, 0xe3, 0x1d, 0xb1, 0x85, 0xed, 0xcd, 0xd7, 0xdb, + 0x31, 0x5f, 0x2f, 0x35, 0x5f, 0xcf, 0xf8, 0x23, 0x13, 0x15, 0xe6, 0x31, + 0x3d, 0x6c, 0xd7, 0xd4, 0x1d, 0x29, 0x79, 0xfa, 0x3c, 0xc2, 0x80, 0x3e, + 0x8f, 0x90, 0x80, 0x6f, 0xf4, 0x94, 0x8e, 0xeb, 0xaf, 0x51, 0x48, 0xaf, + 0x34, 0xea, 0xd8, 0xbe, 0xe8, 0x33, 0x09, 0x03, 0xb0, 0xb9, 0x78, 0x0e, + 0x21, 0x90, 0x9d, 0x29, 0xf3, 0x36, 0xe7, 0x12, 0x0e, 0x07, 0xbd, 0x5e, + 0x10, 0x0c, 0xfb, 0x67, 0xad, 0x2c, 0xc7, 0xbb, 0x62, 0xea, 0xd0, 0xd7, + 0x7c, 0x14, 0xfa, 0x66, 0xde, 0xc7, 0x7c, 0x8a, 0xf6, 0x3a, 0x68, 0xa6, + 0x1b, 0x7a, 0x37, 0xf9, 0xa4, 0x68, 0xdd, 0xd1, 0x05, 0x9d, 0xeb, 0xdd, + 0xfb, 0x3e, 0xd8, 0x3a, 0x5f, 0x06, 0xad, 0x1f, 0x4b, 0xf5, 0x68, 0xff, + 0xff, 0x1c, 0x74, 0x31, 0xe3, 0x84, 0x8f, 0x69, 0xda, 0x22, 0x8d, 0x35, + 0xe8, 0xb3, 0x50, 0x27, 0x53, 0x4e, 0x34, 0xdb, 0x75, 0xde, 0xc4, 0xcd, + 0x53, 0xed, 0xde, 0x73, 0xe0, 0xb5, 0x7e, 0x7f, 0x03, 0x6c, 0x66, 0xd1, + 0x3a, 0xbf, 0x50, 0x5a, 0x6f, 0x6d, 0x83, 0x66, 0x19, 0x77, 0xb9, 0x56, + 0x93, 0xec, 0x19, 0x32, 0x3e, 0x66, 0x3c, 0xa1, 0x18, 0x23, 0xe6, 0xfa, + 0x05, 0xcf, 0x39, 0x70, 0x9d, 0x9b, 0xf1, 0x90, 0xf1, 0x7b, 0x47, 0xfc, + 0xbc, 0x17, 0xb1, 0x67, 0x23, 0xb2, 0x45, 0x43, 0x9b, 0x7b, 0xb4, 0xad, + 0x1a, 0x05, 0x3f, 0x7d, 0x0f, 0x74, 0xcf, 0xba, 0xa4, 0xfd, 0xef, 0x04, + 0x93, 0xae, 0x89, 0x4f, 0x29, 0xd4, 0xcb, 0x6a, 0x5c, 0x3d, 0x25, 0x07, + 0x4a, 0xe4, 0xff, 0xa8, 0x96, 0xe5, 0xbb, 0x53, 0x94, 0x07, 0x51, 0xe0, + 0x71, 0x0a, 0xf8, 0x6b, 0x90, 0xdd, 0x5d, 0x45, 0x94, 0x89, 0xc8, 0xd0, + 0x40, 0x03, 0x78, 0x8f, 0x76, 0x09, 0xdf, 0x2e, 0xca, 0x7b, 0x32, 0x55, + 0x1c, 0xd7, 0x7b, 0x9e, 0x1f, 0x43, 0xdd, 0xc7, 0xf1, 0x4c, 0x14, 0xcb, + 0xa8, 0xf3, 0xb0, 0x2e, 0x3f, 0x31, 0xca, 0x73, 0x22, 0x02, 0x7b, 0xff, + 0x49, 0x29, 0x4c, 0xb6, 0xc1, 0x2f, 0x99, 0x1e, 0x77, 0xe7, 0xe2, 0xe4, + 0xff, 0xa5, 0x91, 0xeb, 0xcc, 0x85, 0xeb, 0xb8, 0x27, 0x47, 0xdc, 0x81, + 0xcd, 0xaa, 0xb3, 0x49, 0xaf, 0xf9, 0xf4, 0x48, 0x3f, 0x6c, 0x8a, 0x9b, + 0x2b, 0xcf, 0xc4, 0xcc, 0xda, 0xc0, 0x82, 0xf5, 0x86, 0xc3, 0xc4, 0x8a, + 0x3a, 0xea, 0xf2, 0xdc, 0xa7, 0x4c, 0x9c, 0x81, 0xf6, 0x39, 0x1a, 0xae, + 0xe7, 0x30, 0xcd, 0x93, 0xb6, 0xeb, 0x00, 0xd7, 0x99, 0x7f, 0xd2, 0xf2, + 0xf5, 0x89, 0x4d, 0x61, 0x5f, 0xf9, 0x60, 0x6c, 0x53, 0x5e, 0x3e, 0x81, + 0x27, 0x77, 0x5d, 0x72, 0x34, 0xab, 0xd8, 0xef, 0x37, 0x02, 0xc6, 0x02, + 0x54, 0xba, 0x55, 0xf2, 0x4d, 0xd5, 0xfd, 0x33, 0xad, 0xc3, 0x2b, 0xa8, + 0xd7, 0x83, 0x63, 0x26, 0x11, 0x03, 0x0e, 0xf2, 0x6f, 0x08, 0xcf, 0x16, + 0xcf, 0x57, 0xcb, 0xc1, 0x73, 0xc2, 0xae, 0xd7, 0x70, 0x0d, 0x66, 0x05, + 0xf0, 0xd2, 0x80, 0xf4, 0x09, 0x19, 0x39, 0xfe, 0x3b, 0x31, 0xee, 0x17, + 0xaa, 0xd1, 0x7e, 0xf5, 0x7d, 0xf5, 0x26, 0x06, 0xf2, 0x2c, 0xca, 0x30, + 0x7f, 0x1c, 0x75, 0x92, 0xf9, 0x6c, 0x64, 0xad, 0x0c, 0xe9, 0x7e, 0x83, + 0x48, 0xdb, 0xb6, 0x7a, 0xbd, 0x4f, 0x5f, 0xce, 0x30, 0x6e, 0x11, 0xd6, + 0x7d, 0x56, 0xef, 0x83, 0x73, 0xd3, 0xc9, 0x7c, 0x5f, 0x84, 0xf2, 0xa9, + 0x53, 0x7a, 0xb9, 0xce, 0x73, 0x66, 0x5c, 0xd3, 0x76, 0xfb, 0x26, 0x9e, + 0x07, 0xdd, 0x02, 0xfb, 0xef, 0x3b, 0x80, 0x89, 0x30, 0x9e, 0x40, 0x3a, + 0x7c, 0xc2, 0xd7, 0x85, 0x61, 0xfa, 0x4d, 0xc2, 0x30, 0xfd, 0x26, 0x61, + 0x20, 0x2e, 0x00, 0x47, 0xa5, 0x7d, 0x75, 0x68, 0x53, 0x5c, 0x85, 0x71, + 0x1c, 0x2c, 0x4d, 0xc3, 0xbf, 0xd5, 0x31, 0x94, 0xce, 0x69, 0x45, 0x9e, + 0xf7, 0xc0, 0x73, 0xe0, 0xad, 0x12, 0x78, 0x0f, 0xb6, 0xe1, 0x97, 0x61, + 0x1b, 0x3e, 0x01, 0xdb, 0xf0, 0x1c, 0x6c, 0xc3, 0xc7, 0x31, 0x37, 0x8f, + 0x2d, 0xe0, 0xd5, 0x8c, 0xe6, 0xd5, 0x42, 0xe9, 0x02, 0x78, 0xb5, 0xeb, + 0x0a, 0xfc, 0xe8, 0xc2, 0xc6, 0xa7, 0x0d, 0xed, 0xc0, 0x96, 0xff, 0xb8, + 0xf6, 0x8b, 0x1f, 0x4c, 0x8d, 0xb1, 0x0e, 0x68, 0x38, 0x49, 0x9f, 0x16, + 0xf2, 0x3f, 0x99, 0x07, 0xef, 0x61, 0xac, 0x8e, 0xa3, 0xae, 0x5b, 0x23, + 0xd4, 0x1f, 0xee, 0x36, 0xee, 0xef, 0xe6, 0x58, 0x13, 0x8b, 0xf0, 0x64, + 0xf8, 0x73, 0x8f, 0x4f, 0x3d, 0x42, 0xbe, 0x4c, 0x7c, 0x76, 0xc4, 0xaf, + 0xe6, 0xc5, 0x1d, 0x1c, 0x5f, 0xe0, 0x6d, 0x5a, 0xae, 0xee, 0x7c, 0xf9, + 0x35, 0x73, 0xe5, 0x75, 0xff, 0xa3, 0xe4, 0x37, 0xe8, 0x6e, 0xe2, 0x3e, + 0x91, 0x8d, 0x6c, 0xb0, 0xb8, 0xdf, 0x2f, 0x6d, 0xdb, 0x60, 0xaf, 0x0f, + 0x82, 0x7e, 0xa7, 0x02, 0xf1, 0xb7, 0x85, 0x6d, 0xce, 0xb7, 0xe3, 0xd9, + 0x76, 0x76, 0xc3, 0x96, 0xed, 0xdb, 0xc4, 0xb5, 0x5e, 0xd8, 0xf2, 0xa9, + 0x70, 0x3e, 0x60, 0xf9, 0xea, 0x39, 0xa7, 0x0c, 0xa5, 0xec, 0x6c, 0xb0, + 0xf1, 0x7e, 0xb6, 0x77, 0x61, 0xd1, 0x3c, 0x5d, 0x0a, 0x78, 0xce, 0x76, + 0xc4, 0x1f, 0xab, 0xa2, 0x95, 0xbf, 0xb2, 0xb4, 0xa2, 0x16, 0x8d, 0xe3, + 0x9c, 0xa5, 0x95, 0x10, 0xde, 0x58, 0x48, 0x2b, 0x75, 0x21, 0xad, 0xe4, + 0xc7, 0x43, 0x5a, 0x61, 0xdd, 0x73, 0x21, 0xad, 0x24, 0xaa, 0x69, 0x25, + 0x3f, 0xee, 0xe0, 0x59, 0x0c, 0x07, 0xe9, 0x85, 0xed, 0x90, 0x5e, 0x00, + 0x4b, 0xa5, 0x32, 0x47, 0x2f, 0x31, 0xb4, 0x73, 0xa8, 0xa4, 0x34, 0xad, + 0x0c, 0xa9, 0x50, 0x47, 0x78, 0x98, 0x73, 0xcc, 0xfd, 0x15, 0x69, 0x24, + 0x65, 0x69, 0x64, 0xfe, 0x2c, 0xd1, 0x22, 0xda, 0x00, 0xee, 0x79, 0x5e, + 0x60, 0xb3, 0xa6, 0x8d, 0xfb, 0x53, 0x2f, 0xa0, 0xec, 0x28, 0x68, 0x23, + 0xc4, 0xc1, 0x03, 0x16, 0x07, 0x8b, 0xe7, 0xf2, 0xb4, 0xc5, 0xc1, 0xa8, + 0xc5, 0x81, 0xe6, 0x97, 0x3c, 0xe7, 0x4c, 0x69, 0x1c, 0xd4, 0x69, 0x1c, + 0x88, 0x0a, 0xeb, 0x9e, 0x5e, 0x06, 0x07, 0x2c, 0x33, 0xaa, 0xc7, 0x1f, + 0xc1, 0xf8, 0xf7, 0x61, 0xfc, 0x4a, 0x8f, 0x9f, 0xf3, 0xc0, 0xf1, 0x03, + 0x96, 0xca, 0x77, 0xe6, 0xc6, 0xdf, 0x84, 0x36, 0x0e, 0x6a, 0xdb, 0x99, + 0xf1, 0x54, 0xea, 0x46, 0x33, 0xfe, 0xc7, 0x2a, 0xe6, 0x8c, 0xc9, 0x63, + 0x4b, 0xf4, 0xd8, 0x0b, 0x96, 0x37, 0x7c, 0xbd, 0xce, 0xc6, 0x73, 0x6d, + 0xe7, 0xa0, 0xbb, 0xc6, 0x52, 0x09, 0x7b, 0xe6, 0xd4, 0xd8, 0x43, 0x5f, + 0x4d, 0x91, 0x77, 0x3e, 0xaa, 0xf7, 0xfa, 0x9d, 0xa5, 0x5d, 0x54, 0x6a, + 0x92, 0xbe, 0xb1, 0x6a, 0xb8, 0x09, 0x6f, 0x3e, 0x50, 0x3e, 0x63, 0x37, + 0xfb, 0xa1, 0x3b, 0x4c, 0xdc, 0x1a, 0xb4, 0x84, 0xf4, 0x64, 0xbe, 0x37, + 0x52, 0x27, 0xea, 0x81, 0x0f, 0x60, 0xcc, 0x2e, 0x7c, 0xcc, 0x76, 0x6f, + 0x9b, 0xa2, 0xae, 0xbb, 0xba, 0x4a, 0xd7, 0x35, 0x5b, 0x5d, 0xb7, 0x86, + 0xba, 0x0e, 0x70, 0x3f, 0x25, 0x87, 0x4b, 0x9c, 0xbf, 0x7c, 0xa2, 0x4e, + 0xc7, 0x40, 0x1d, 0x1b, 0xe7, 0x4b, 0xc6, 0x0f, 0x6b, 0x5a, 0xa6, 0xce, + 0x4a, 0xea, 0xb8, 0xe4, 0x4c, 0xd7, 0x3f, 0xd9, 0x75, 0x10, 0xea, 0xb5, + 0xef, 0x07, 0x7f, 0xb0, 0x8c, 0x5e, 0x83, 0xfe, 0xd1, 0xf6, 0x59, 0x0d, + 0x64, 0xad, 0x9c, 0x6a, 0xc6, 0xb3, 0x9a, 0xe7, 0xc1, 0x3a, 0x3b, 0x54, + 0xbd, 0xd4, 0x9c, 0x6a, 0x94, 0x3d, 0x63, 0x7a, 0xdd, 0x5c, 0xd4, 0x29, + 0xe0, 0xff, 0x14, 0xcf, 0x14, 0x88, 0x3e, 0x03, 0x95, 0x1b, 0x85, 0x3f, + 0x33, 0xf1, 0x94, 0xd9, 0x1b, 0x38, 0x56, 0xa3, 0x7f, 0xd3, 0xc6, 0x28, + 0xa4, 0x32, 0xfa, 0xec, 0xd0, 0x1e, 0xb4, 0xd9, 0xbe, 0xa9, 0x16, 0x63, + 0x8e, 0xa1, 0x2e, 0xf7, 0x16, 0xaa, 0x36, 0x57, 0x6a, 0xc5, 0x9d, 0x88, + 0xea, 0xf3, 0x4b, 0x3c, 0x7f, 0x9f, 0xed, 0x69, 0x42, 0x5e, 0x44, 0xaf, + 0x15, 0xd4, 0x9c, 0x9a, 0x3f, 0xa7, 0xae, 0x8e, 0x8a, 0x5d, 0xc3, 0x4f, + 0x6b, 0xbd, 0x12, 0x39, 0x4a, 0x9d, 0xc3, 0xfd, 0x55, 0x3d, 0x98, 0xf7, + 0xe5, 0xf4, 0x8d, 0x31, 0x62, 0xb3, 0x98, 0x3f, 0x75, 0x86, 0x67, 0x8d, + 0x5b, 0xf1, 0x0e, 0xdb, 0x0b, 0xf5, 0x08, 0x74, 0xdf, 0xdb, 0x3f, 0xe1, + 0x49, 0x3d, 0xf0, 0x3d, 0xa1, 0x80, 0x6b, 0x57, 0xd3, 0x42, 0x5e, 0x85, + 0xb1, 0x69, 0x43, 0x0f, 0x8f, 0xbf, 0x21, 0x3f, 0x90, 0x26, 0x3a, 0x6d, + 0x6c, 0xc1, 0xb7, 0x31, 0x7e, 0xd2, 0xb6, 0xa1, 0x87, 0x47, 0x53, 0x19, + 0xc5, 0xbd, 0x51, 0x66, 0x1d, 0x94, 0xb4, 0x41, 0x9a, 0x4f, 0xe8, 0xf5, + 0xd1, 0x8c, 0xbc, 0x2c, 0x99, 0xa6, 0x76, 0xd8, 0x5d, 0xff, 0xb6, 0x73, + 0x6c, 0xee, 0x2e, 0xd0, 0x34, 0x07, 0xdd, 0xc4, 0x7d, 0xca, 0x9d, 0xf2, + 0x5e, 0x9e, 0x57, 0x98, 0x70, 0xa0, 0x94, 0x9f, 0xd2, 0x7b, 0xbf, 0x77, + 0x14, 0x57, 0xcb, 0xad, 0xa9, 0xa8, 0x5d, 0xe7, 0xac, 0x05, 0x1d, 0x40, + 0x50, 0x9f, 0xaa, 0xc5, 0x13, 0x75, 0x38, 0x7f, 0x17, 0x53, 0x99, 0xa4, + 0x22, 0xb3, 0xc3, 0xe7, 0x9f, 0x91, 0x2d, 0xde, 0x1e, 0x7d, 0xce, 0x4e, + 0x9c, 0xba, 0x53, 0x7f, 0xe9, 0xd1, 0x06, 0x25, 0xfd, 0xcc, 0xf8, 0xb5, + 0x7a, 0x5d, 0xab, 0x3f, 0x15, 0x04, 0x39, 0xcc, 0x5f, 0x41, 0x4c, 0xfc, + 0x6c, 0xc2, 0x67, 0x1a, 0xfd, 0xda, 0x06, 0xa7, 0xf6, 0x4c, 0xa3, 0x63, + 0x68, 0x45, 0x22, 0x2a, 0x5d, 0xef, 0xd4, 0x9c, 0xba, 0x93, 0x73, 0x06, + 0xba, 0xf2, 0x1c, 0x43, 0x57, 0x31, 0x67, 0x9e, 0xae, 0xd6, 0xd9, 0xdf, + 0x2a, 0x5d, 0x27, 0x99, 0x64, 0x1d, 0xc6, 0xdb, 0x5b, 0x0c, 0x61, 0x3c, + 0x0c, 0xb8, 0x08, 0xcf, 0xdd, 0x18, 0xc3, 0x30, 0x9e, 0x3c, 0x60, 0x01, + 0xb3, 0x9f, 0x2a, 0x00, 0xe6, 0x83, 0x78, 0x18, 0x27, 0x6b, 0x76, 0x22, + 0x13, 0xd5, 0xf0, 0x12, 0xc6, 0x1f, 0x5b, 0x78, 0x5f, 0x0f, 0x56, 0x4f, + 0x66, 0xba, 0x8b, 0x80, 0x87, 0x70, 0xde, 0x07, 0x18, 0x69, 0x97, 0x8e, + 0xe2, 0xdb, 0x03, 0x7c, 0x63, 0x16, 0x26, 0xd0, 0xe3, 0xd8, 0x43, 0xf3, + 0xbf, 0x8b, 0xb4, 0x93, 0x8f, 0xd9, 0xef, 0xd6, 0x45, 0x32, 0xe0, 0x15, + 0x87, 0x78, 0x1e, 0x29, 0xbd, 0xe6, 0xc0, 0x0e, 0x00, 0xdf, 0xbf, 0xe4, + 0x44, 0xce, 0xc4, 0xe5, 0x50, 0x91, 0x31, 0x84, 0xe3, 0x0e, 0xe7, 0x41, + 0xf9, 0x57, 0xa1, 0x4c, 0x5c, 0xc9, 0xc4, 0xd5, 0x78, 0xde, 0x82, 0x67, + 0x03, 0x9e, 0x8d, 0x78, 0xd6, 0xe3, 0x69, 0xc5, 0xf3, 0x2d, 0x94, 0x53, + 0xb1, 0x3a, 0xe1, 0x7e, 0xd5, 0x16, 0xa5, 0x34, 0x1f, 0x71, 0xcf, 0xc2, + 0x65, 0xc0, 0xe5, 0x2b, 0xd0, 0x3b, 0x1e, 0x9e, 0xf1, 0xf8, 0x3a, 0xfa, + 0x98, 0xc5, 0xd3, 0xa9, 0xe4, 0x4c, 0x17, 0x9e, 0x14, 0x9e, 0x6e, 0x3c, + 0x3d, 0x78, 0xd2, 0x78, 0x5e, 0x75, 0x0c, 0xcf, 0x5d, 0x02, 0xbe, 0x42, + 0x1e, 0x01, 0xce, 0x17, 0xf0, 0x9c, 0xe7, 0xbc, 0x09, 0x9e, 0x73, 0x2c, + 0xcf, 0x39, 0xf3, 0x3c, 0x57, 0xeb, 0xa8, 0x63, 0xf5, 0x4e, 0xe4, 0x18, + 0x7d, 0x85, 0x5a, 0xc7, 0xf0, 0x7f, 0x44, 0x7a, 0x07, 0x41, 0x4b, 0xc7, + 0x30, 0x67, 0xc7, 0x48, 0x57, 0x2e, 0xd2, 0xc7, 0x16, 0xf5, 0x3b, 0xfa, + 0x26, 0xfa, 0x3d, 0x61, 0xfb, 0x7d, 0xb8, 0xaa, 0xdf, 0x83, 0x68, 0xfb, + 0x3e, 0xdb, 0xef, 0xc1, 0xaa, 0x7e, 0x41, 0x2b, 0xc7, 0xf2, 0x78, 0x48, + 0x17, 0x23, 0x48, 0x0f, 0x65, 0xc2, 0xdd, 0x6b, 0xa4, 0xbe, 0x46, 0x9f, + 0x27, 0x8d, 0xf9, 0x35, 0x73, 0xba, 0x31, 0x53, 0xa5, 0x1f, 0x7e, 0x16, + 0xfd, 0x38, 0x5c, 0xa2, 0x8d, 0x38, 0x5d, 0x25, 0x17, 0xe8, 0xfb, 0x04, + 0x72, 0x5c, 0xfb, 0x39, 0xf4, 0x79, 0xe8, 0xff, 0x2c, 0xb6, 0xad, 0x3e, + 0xae, 0xf7, 0xe7, 0xde, 0x55, 0x6c, 0x95, 0x4f, 0x14, 0x69, 0x13, 0x92, + 0x5e, 0x82, 0x60, 0xcf, 0x36, 0xda, 0xa7, 0xf9, 0x60, 0x9d, 0x9f, 0xd4, + 0xb1, 0xb5, 0x4f, 0x2e, 0xd5, 0x19, 0xa3, 0xbd, 0xf0, 0xcd, 0xb3, 0x47, + 0x3f, 0x08, 0x9d, 0x51, 0x03, 0xb8, 0x9f, 0xd2, 0x77, 0x80, 0xec, 0x1a, + 0x55, 0x23, 0x6b, 0x25, 0x2e, 0x37, 0x17, 0x6b, 0x61, 0xf7, 0x30, 0x56, + 0x5e, 0x2f, 0xed, 0xdb, 0xa2, 0xe6, 0x6c, 0x8d, 0x17, 0xc3, 0x6f, 0xcf, + 0x9c, 0xf5, 0x89, 0xc5, 0x91, 0x1f, 0x69, 0xa2, 0x1c, 0x8c, 0xf9, 0xef, + 0xd4, 0xfb, 0x26, 0xdb, 0xb6, 0xd1, 0x6e, 0xb9, 0x41, 0xeb, 0x70, 0x77, + 0x89, 0x9d, 0xa4, 0x5a, 0x3c, 0x99, 0xb7, 0xd1, 0x76, 0x17, 0x93, 0x09, + 0xc2, 0xf5, 0x90, 0x70, 0x3f, 0xc1, 0x7e, 0x29, 0xa4, 0x1a, 0x25, 0x92, + 0xe6, 0xba, 0x5c, 0xb2, 0x93, 0xb6, 0xd1, 0xc4, 0x98, 0x67, 0xcf, 0x9e, + 0xac, 0x96, 0x0b, 0xba, 0x9f, 0x5a, 0x0d, 0xa3, 0x39, 0x8f, 0xc6, 0x35, + 0x2f, 0x9e, 0x81, 0x72, 0xf1, 0x6e, 0xd0, 0x7a, 0x67, 0xa2, 0xcc, 0xb3, + 0x4e, 0xf0, 0x97, 0xca, 0x31, 0x7d, 0xc6, 0xd4, 0x7b, 0x3b, 0xfc, 0xd8, + 0xf2, 0x06, 0xd9, 0x3d, 0xb6, 0x82, 0xeb, 0x28, 0xb1, 0xb5, 0xd0, 0x1f, + 0xac, 0xd3, 0xb6, 0x0d, 0xfe, 0xdf, 0xf8, 0x46, 0x79, 0x7c, 0x9c, 0x6d, + 0xb7, 0xc8, 0xe4, 0x94, 0x38, 0xde, 0xdb, 0x57, 0xa2, 0x8c, 0xc7, 0xf1, + 0x08, 0xf7, 0x3c, 0xb5, 0x6d, 0x13, 0xe5, 0xbd, 0xdd, 0x95, 0xf3, 0xdd, + 0x11, 0xbd, 0x26, 0xe3, 0x82, 0x4e, 0xd8, 0xde, 0xf9, 0xee, 0x56, 0x39, + 0x3b, 0x05, 0x9a, 0x80, 0xdc, 0xef, 0x3b, 0x45, 0x98, 0x44, 0xb6, 0x4f, + 0xc0, 0x5e, 0x90, 0x76, 0x3c, 0xa0, 0x0f, 0xc8, 0xef, 0x5b, 0xbb, 0xd9, + 0x17, 0xf4, 0x12, 0x74, 0x5c, 0xdb, 0x36, 0x23, 0x0b, 0x32, 0x13, 0x35, + 0x48, 0x67, 0xbb, 0xf0, 0x0f, 0x07, 0xd9, 0x4e, 0x58, 0x57, 0x61, 0x4c, + 0xb5, 0x9a, 0x5e, 0x66, 0x17, 0xe9, 0x8f, 0x73, 0x3f, 0x97, 0xfd, 0xcd, + 0x36, 0x3a, 0x41, 0x2b, 0xbe, 0xde, 0xc3, 0x63, 0x6c, 0x2b, 0xce, 0x09, + 0x6d, 0x22, 0xda, 0x55, 0xd7, 0x6a, 0xfb, 0x62, 0xb2, 0xc2, 0x19, 0xe4, + 0xda, 0x48, 0x38, 0x47, 0x71, 0x39, 0x59, 0x9a, 0x9b, 0xa7, 0x0d, 0x35, + 0x0b, 0xe7, 0x89, 0xb4, 0x92, 0x1a, 0xb2, 0xb6, 0xc7, 0x8c, 0x3c, 0x0f, + 0xbb, 0xac, 0x53, 0xcf, 0xd9, 0x0c, 0x6c, 0x59, 0x3b, 0x67, 0xda, 0x9e, + 0x2d, 0x84, 0x73, 0x36, 0x00, 0x8d, 0x53, 0xbe, 0x41, 0xcf, 0x99, 0x07, + 0xba, 0xc9, 0x03, 0xef, 0x79, 0xcc, 0x53, 0x1e, 0x73, 0x94, 0x2f, 0xb7, + 0xc8, 0xc4, 0x71, 0xd5, 0x5a, 0x23, 0x92, 0xd8, 0xed, 0xb7, 0xc8, 0xf0, + 0x14, 0x63, 0x05, 0x1b, 0x60, 0x83, 0x6d, 0xc4, 0xd3, 0x8a, 0x6f, 0xd6, + 0xe3, 0x1d, 0x1f, 0x0a, 0x75, 0xeb, 0x96, 0xd8, 0x59, 0x67, 0xd1, 0xf7, + 0xd3, 0xc0, 0xc3, 0xa3, 0xc0, 0xc3, 0x3c, 0xef, 0xbc, 0x50, 0x15, 0x5f, + 0xe2, 0x58, 0xb5, 0x0e, 0xc5, 0x78, 0x63, 0x7a, 0x3e, 0x75, 0x9c, 0xa9, + 0x54, 0xfb, 0x66, 0xec, 0xa9, 0x38, 0xed, 0xa9, 0xdc, 0xa8, 0x67, 0xce, + 0x60, 0x0d, 0xc0, 0x77, 0xf2, 0xf7, 0x69, 0x5a, 0x1f, 0x1a, 0x27, 0x5c, + 0xd1, 0x10, 0xae, 0x05, 0x73, 0xc6, 0x33, 0xb3, 0x4b, 0xe3, 0x18, 0x2f, + 0xcc, 0xed, 0x11, 0x87, 0x2e, 0x97, 0xd1, 0x14, 0xe3, 0x24, 0xad, 0xcb, + 0xc0, 0xf4, 0x94, 0xb6, 0x61, 0x45, 0x9d, 0x96, 0x03, 0x25, 0x9e, 0xb7, + 0xe5, 0x1a, 0xcc, 0xef, 0x31, 0x7e, 0xd4, 0x39, 0x21, 0xc7, 0xd0, 0x37, + 0xd7, 0xc5, 0x95, 0x8d, 0xcf, 0xac, 0xb2, 0x7b, 0xf2, 0xaa, 0x63, 0x34, + 0x66, 0xdd, 0x7c, 0xe1, 0xd9, 0x93, 0xe4, 0xc0, 0xac, 0x5e, 0x77, 0xe5, + 0x9a, 0xa1, 0x8c, 0x46, 0xa0, 0xfd, 0x76, 0x77, 0x27, 0x7b, 0xcc, 0x59, + 0xc3, 0x84, 0xf4, 0x97, 0xcc, 0xf8, 0x2f, 0xea, 0x7d, 0x93, 0x66, 0x7f, + 0xb8, 0xd9, 0x53, 0xb9, 0x5f, 0x2e, 0xa6, 0xa2, 0x55, 0x73, 0x5b, 0x27, + 0xc3, 0xc0, 0x85, 0x5e, 0xcb, 0x84, 0x5d, 0x9c, 0xeb, 0x7e, 0xbc, 0x89, + 0x67, 0xd1, 0xa2, 0x98, 0x9f, 0xc2, 0x38, 0xcf, 0xa7, 0xb3, 0xdd, 0x2b, + 0xb5, 0x45, 0x31, 0xcb, 0xb3, 0x4e, 0x90, 0x95, 0x6f, 0xdd, 0x12, 0xaf, + 0xd7, 0xf9, 0x2b, 0xec, 0x99, 0x16, 0xd8, 0x0d, 0xbb, 0x02, 0xf9, 0x33, + 0xe8, 0xc9, 0xd3, 0x76, 0x4c, 0x09, 0x1d, 0x93, 0x92, 0xe0, 0x7c, 0x2a, + 0x6e, 0xe3, 0xce, 0x1c, 0xcb, 0x98, 0xa5, 0x6f, 0x63, 0xff, 0xcc, 0xdb, + 0xd0, 0x5d, 0x9a, 0xd6, 0x1f, 0xd7, 0xb2, 0xb0, 0xcb, 0xda, 0xce, 0x3a, + 0x8e, 0x73, 0x42, 0xf4, 0x1e, 0xac, 0xd0, 0x37, 0xea, 0xa8, 0xf2, 0x0b, + 0x8c, 0x2f, 0x57, 0x18, 0x5b, 0x4e, 0x46, 0xcd, 0xfb, 0x84, 0xf4, 0xe5, + 0xf6, 0x6c, 0xe2, 0xdd, 0x30, 0xa1, 0x2f, 0xd7, 0x65, 0x7d, 0xb9, 0x46, + 0xed, 0xcb, 0x99, 0xd8, 0x43, 0xe3, 0x9c, 0x2f, 0x57, 0x18, 0xcb, 0x83, + 0x56, 0x6a, 0xed, 0x59, 0x09, 0x63, 0x0b, 0x0d, 0x17, 0x5d, 0xbd, 0x6f, + 0x24, 0x37, 0xa0, 0xe0, 0x37, 0x18, 0x1f, 0x8b, 0xb1, 0x0a, 0xa5, 0xfe, + 0xce, 0xfa, 0x17, 0x1b, 0x24, 0xd3, 0xbc, 0x02, 0xe3, 0x7e, 0x4a, 0xcf, + 0xb9, 0x59, 0xc3, 0x82, 0x5c, 0x1b, 0x64, 0xcc, 0x87, 0x67, 0x47, 0x35, + 0x7f, 0x25, 0x7a, 0x23, 0x9d, 0xc6, 0x9e, 0xf5, 0x13, 0x6b, 0xa5, 0xfe, + 0xb8, 0x53, 0x18, 0x8f, 0xda, 0x7e, 0x13, 0x80, 0xa9, 0x06, 0x73, 0xf3, + 0x4e, 0x2b, 0x93, 0xd9, 0xf7, 0x3b, 0xea, 0x18, 0x1b, 0x98, 0x2a, 0x9a, + 0x18, 0x60, 0x5f, 0x31, 0x12, 0x9e, 0x5b, 0x57, 0x5c, 0x47, 0xce, 0x0c, + 0xae, 0x00, 0x2c, 0x2b, 0x96, 0xb5, 0x59, 0x1f, 0x7b, 0x43, 0x1d, 0x45, + 0x9a, 0x7a, 0x4a, 0xef, 0x2f, 0x5c, 0xd9, 0x9d, 0xdc, 0xa9, 0xcf, 0x23, + 0xe9, 0x58, 0x62, 0x5e, 0xb8, 0x7f, 0xf7, 0x9b, 0xf2, 0x36, 0x2d, 0xfb, + 0x0f, 0xa4, 0xa8, 0xc7, 0xb6, 0xe9, 0xdf, 0xb5, 0xe9, 0x20, 0x38, 0xdf, + 0xfd, 0x2c, 0x6c, 0x16, 0xdf, 0xfb, 0x96, 0xb4, 0xc7, 0x7b, 0xb5, 0x0d, + 0x85, 0xb9, 0x1a, 0xac, 0x97, 0x15, 0xfe, 0xb8, 0xdd, 0xab, 0x68, 0xd6, + 0x03, 0x0b, 0xc2, 0xfb, 0x17, 0x3a, 0x6c, 0x5e, 0x3e, 0xa8, 0x07, 0x3d, + 0x7d, 0x44, 0x8c, 0xac, 0xc9, 0xcd, 0xcb, 0x1a, 0xee, 0xa7, 0xcb, 0x90, + 0xa0, 0xdd, 0x23, 0x92, 0xe4, 0xdd, 0x49, 0xec, 0xbb, 0x20, 0x57, 0x41, + 0x3f, 0xb3, 0x1e, 0x6d, 0x56, 0x7e, 0x73, 0x0f, 0x8a, 0xef, 0x1d, 0x84, + 0x8e, 0xb9, 0x61, 0xa9, 0x8e, 0x89, 0xd3, 0xbf, 0xcf, 0x8d, 0xd2, 0x47, + 0x5c, 0x89, 0x3a, 0x2d, 0xf2, 0xd1, 0xb1, 0xdf, 0x5a, 0x4b, 0x1e, 0x1b, + 0x82, 0x7c, 0x57, 0xf7, 0x87, 0xe7, 0x2e, 0x99, 0xc6, 0x7c, 0xb6, 0x5b, + 0x27, 0x89, 0xf7, 0x79, 0xf2, 0xc5, 0x4a, 0x32, 0x31, 0x0b, 0x1d, 0x35, + 0xe4, 0x0c, 0xb7, 0x9a, 0xd8, 0xe9, 0xa7, 0xd6, 0x9a, 0x73, 0x5a, 0xf5, + 0xc0, 0x69, 0x18, 0x4f, 0xad, 0xa6, 0xdd, 0x59, 0x2b, 0x97, 0x83, 0xa0, + 0xbe, 0x5b, 0xcb, 0xe2, 0x9d, 0x94, 0xc5, 0x07, 0x52, 0x1d, 0x86, 0x07, + 0xb4, 0xef, 0xc4, 0x3d, 0x00, 0xc0, 0x43, 0xb7, 0xcb, 0xbd, 0xd0, 0x96, + 0x4f, 0xfd, 0xcc, 0x8c, 0x95, 0x4f, 0xca, 0x59, 0xca, 0x9f, 0x6a, 0x6b, + 0x74, 0x81, 0xec, 0x3d, 0x34, 0x46, 0xbd, 0x9c, 0x9a, 0xfe, 0x26, 0xe4, + 0x55, 0x4e, 0xe3, 0xa1, 0x45, 0xee, 0x1b, 0x93, 0xcc, 0x45, 0xe8, 0xac, + 0xc2, 0xd4, 0x42, 0x1e, 0x5d, 0xda, 0x1e, 0xc7, 0x7a, 0x7a, 0xad, 0xf1, + 0x71, 0x17, 0x8e, 0x75, 0x9a, 0x7b, 0x8c, 0xf4, 0x58, 0xb9, 0x37, 0xff, + 0x9c, 0x1d, 0xeb, 0xca, 0x70, 0xac, 0x3d, 0x0b, 0xc7, 0x1a, 0xfa, 0xf8, + 0xa1, 0xfc, 0x4d, 0xe8, 0xb3, 0x49, 0xfa, 0x4c, 0xcc, 0xd8, 0x4a, 0xe9, + 0x1d, 0x6d, 0xb4, 0x72, 0xd3, 0x83, 0x0e, 0xe2, 0x79, 0xa1, 0xe9, 0xcf, + 0x79, 0x62, 0x71, 0xa6, 0x88, 0x07, 0xca, 0xdc, 0x26, 0x7d, 0x9e, 0x71, + 0x02, 0x7e, 0xd6, 0x87, 0x8b, 0x2c, 0x1b, 0xe6, 0x5f, 0x29, 0x46, 0x1c, + 0xfa, 0xd6, 0xf4, 0x9f, 0x3a, 0x97, 0xc4, 0x16, 0x4c, 0x1c, 0x98, 0xf1, + 0x5f, 0x73, 0xcf, 0x02, 0xf7, 0x7d, 0xdf, 0x01, 0xde, 0xfa, 0xed, 0x62, + 0xb2, 0x27, 0x1b, 0xa1, 0x3c, 0x9d, 0x95, 0x43, 0x95, 0x3e, 0x69, 0xd3, + 0x67, 0xed, 0xdf, 0x30, 0x46, 0x9c, 0xa9, 0x8e, 0x11, 0x8b, 0x63, 0x62, + 0xc4, 0x3b, 0x7f, 0x8e, 0x18, 0xb1, 0x38, 0x26, 0x46, 0xbc, 0x9c, 0x9f, + 0x35, 0x52, 0x9a, 0xc5, 0xb8, 0xea, 0x21, 0x53, 0x94, 0x93, 0x9b, 0x6a, + 0xc0, 0xbb, 0x16, 0x6f, 0xc0, 0x32, 0x56, 0xc0, 0xdb, 0xc3, 0xfb, 0x20, + 0xde, 0x31, 0x19, 0x99, 0xd3, 0x1d, 0xb3, 0x90, 0x1f, 0xd4, 0x69, 0xac, + 0x6b, 0xfc, 0x82, 0xc9, 0x72, 0x33, 0xca, 0x5d, 0x72, 0x26, 0x58, 0xaf, + 0xd4, 0x28, 0xc3, 0x63, 0x94, 0xdd, 0x4d, 0x32, 0x3a, 0x16, 0xda, 0xb8, + 0x9f, 0x5d, 0xcf, 0xb5, 0x81, 0x21, 0x09, 0x6d, 0xd8, 0x67, 0xd6, 0x9b, + 0xb5, 0xdb, 0x2d, 0x31, 0xa9, 0x5f, 0x8d, 0x39, 0x38, 0xee, 0x5c, 0x1c, + 0x5f, 0xbd, 0xc0, 0x96, 0x4d, 0xd8, 0xd8, 0xe0, 0xb8, 0xd5, 0xc1, 0xcb, + 0xcb, 0x88, 0xea, 0xf9, 0x8f, 0xdb, 0x73, 0xbc, 0x51, 0x7b, 0xd7, 0x5f, + 0x42, 0xcf, 0xcf, 0x40, 0x65, 0x16, 0xfd, 0xad, 0x57, 0x99, 0x71, 0x8e, + 0x73, 0xee, 0x7e, 0x1e, 0xc8, 0xc5, 0x56, 0x35, 0x34, 0xbe, 0x80, 0x2e, + 0x41, 0xb7, 0x1c, 0x9b, 0x03, 0xda, 0xbd, 0x57, 0x26, 0x46, 0x09, 0x5f, + 0x47, 0x3c, 0xa2, 0xcf, 0xf5, 0xe2, 0x7b, 0xdc, 0x9c, 0x27, 0xea, 0xad, + 0x84, 0x67, 0x7a, 0xd7, 0x00, 0xde, 0xc5, 0xe7, 0x7a, 0xad, 0x9e, 0xd6, + 0x36, 0x04, 0xcf, 0xf7, 0x86, 0x63, 0x58, 0x8e, 0x9e, 0x02, 0x19, 0xd6, + 0xfb, 0x7d, 0xd7, 0xca, 0xe9, 0x07, 0xe7, 0xce, 0x17, 0x34, 0xc1, 0x56, + 0x69, 0x85, 0xa9, 0x3c, 0xe0, 0xa6, 0xb9, 0xef, 0x82, 0xfb, 0x0b, 0x3a, + 0xe2, 0xb7, 0xe9, 0x73, 0x1f, 0xf3, 0x67, 0xac, 0xe7, 0xcf, 0x7e, 0x84, + 0x67, 0x5a, 0xe3, 0xd2, 0x07, 0x3a, 0xec, 0xd7, 0xe9, 0x31, 0x8c, 0x87, + 0x6b, 0xbe, 0x1a, 0x0f, 0x90, 0x3d, 0x5c, 0xfb, 0xc5, 0xd8, 0x2b, 0x2d, + 0x2a, 0xa7, 0xcf, 0x58, 0x47, 0x2d, 0x8d, 0x5d, 0x76, 0xf6, 0x94, 0x13, + 0x6a, 0x4f, 0xd9, 0x57, 0x7b, 0xcb, 0x36, 0xaf, 0xfb, 0x01, 0xcc, 0x07, + 0x7e, 0x8f, 0x17, 0x9d, 0x21, 0xe0, 0xab, 0x50, 0x3a, 0xe2, 0x64, 0xf4, + 0xfb, 0xa8, 0x7d, 0x43, 0x0e, 0x60, 0xae, 0x7a, 0xc7, 0xa3, 0x5a, 0xde, + 0xcf, 0xdf, 0xd3, 0x17, 0xce, 0xeb, 0x0b, 0x7a, 0x0d, 0x68, 0x5a, 0x88, + 0x6b, 0xcf, 0xda, 0x10, 0xc7, 0x9d, 0x9c, 0xc6, 0x3d, 0xcb, 0x7c, 0x4b, + 0xff, 0x06, 0x9d, 0x2b, 0xd3, 0x5e, 0x2b, 0xde, 0x8b, 0xf7, 0x4d, 0x86, + 0xfa, 0x86, 0x70, 0xdf, 0x09, 0xbd, 0x16, 0xec, 0x37, 0xf2, 0x6a, 0x56, + 0x46, 0x2a, 0x5c, 0xc3, 0x64, 0x3b, 0x48, 0x2f, 0xd7, 0xc0, 0x1e, 0x58, + 0x78, 0xbe, 0xba, 0x7f, 0x7e, 0x1e, 0x12, 0xe3, 0x42, 0x58, 0xee, 0xd6, + 0x67, 0x17, 0xab, 0xef, 0x1e, 0xb9, 0xf2, 0xbf, 0x70, 0xfd, 0xd0, 0xc8, + 0x50, 0x0b, 0x47, 0x86, 0xf2, 0xce, 0xc8, 0x95, 0xaf, 0xcb, 0x41, 0xe0, + 0xf1, 0x30, 0x60, 0x52, 0xf7, 0xf3, 0xce, 0xab, 0x57, 0xa5, 0x30, 0x59, + 0x2f, 0xea, 0xa1, 0x82, 0xe3, 0x3e, 0x54, 0x2b, 0x91, 0x87, 0x94, 0x53, + 0xf3, 0x50, 0xbb, 0xf6, 0xcf, 0x77, 0xa4, 0xda, 0xe3, 0x7b, 0xe5, 0xb8, + 0xe3, 0xde, 0xaf, 0xf4, 0x59, 0xdb, 0x82, 0xc7, 0x58, 0xdf, 0x71, 0x27, + 0x72, 0x7f, 0xd4, 0x9e, 0xd3, 0x37, 0xf1, 0xbd, 0x59, 0xcd, 0xf7, 0xdf, + 0x58, 0x47, 0x9c, 0xcd, 0x0a, 0xf1, 0xf1, 0x59, 0xc8, 0xad, 0x4f, 0x4b, + 0x76, 0x34, 0x31, 0x57, 0xc6, 0xec, 0xb3, 0xdf, 0xb0, 0xce, 0xf0, 0x0b, + 0xcb, 0xbc, 0xe2, 0xf0, 0xce, 0x1c, 0xa3, 0x33, 0x3e, 0xdf, 0x12, 0xee, + 0xb9, 0x37, 0x73, 0xca, 0xfc, 0xc6, 0x75, 0x52, 0xff, 0x0a, 0xe6, 0x8b, + 0xfd, 0x11, 0x57, 0xab, 0xf4, 0x3d, 0x05, 0x9e, 0x6c, 0x89, 0xd7, 0xcd, + 0xd9, 0x43, 0x46, 0xf6, 0xd6, 0x01, 0x6e, 0xc0, 0x6f, 0xec, 0x3b, 0x21, + 0x9d, 0x0a, 0x24, 0x37, 0x69, 0xb6, 0xa3, 0x67, 0x87, 0x98, 0x39, 0x33, + 0x34, 0xb3, 0xc2, 0xd8, 0x91, 0xf8, 0x36, 0x74, 0xa1, 0x64, 0xfb, 0xd8, + 0x4b, 0x4e, 0x3f, 0xcf, 0x3c, 0x8a, 0xb6, 0x1b, 0x97, 0xb3, 0x09, 0xc1, + 0x4b, 0xcf, 0x5b, 0xff, 0x32, 0x08, 0xc6, 0x52, 0x29, 0xde, 0x2b, 0xb8, + 0x8c, 0x4f, 0xb9, 0xca, 0x99, 0x1c, 0x6d, 0x70, 0x26, 0x46, 0x03, 0xd9, + 0x93, 0xe2, 0x9d, 0x49, 0xdc, 0x93, 0xa0, 0xe3, 0xe3, 0x48, 0x6b, 0x87, + 0x6e, 0x7d, 0xc7, 0x3a, 0xee, 0x71, 0xbb, 0xd9, 0x6f, 0xb4, 0xe5, 0x88, + 0x63, 0xfa, 0xca, 0xed, 0x27, 0x72, 0xc2, 0xbb, 0x8b, 0xb6, 0xc4, 0x63, + 0x7a, 0x7f, 0xe2, 0x17, 0x50, 0x0f, 0x7d, 0x94, 0xd8, 0xaf, 0xeb, 0x4c, + 0x40, 0x9e, 0x4d, 0x8e, 0xf1, 0xbe, 0x14, 0x9e, 0x63, 0x88, 0xb4, 0x2a, + 0xb9, 0xd6, 0x1b, 0xb6, 0xf7, 0x69, 0xe6, 0xe1, 0x0a, 0x45, 0x74, 0xda, + 0x16, 0x6f, 0xf7, 0xdc, 0x1d, 0x9b, 0x61, 0x5a, 0x78, 0xd7, 0xa6, 0xd2, + 0x67, 0x56, 0xe0, 0xd3, 0x9e, 0x1e, 0x92, 0xb8, 0x33, 0x55, 0x6c, 0x75, + 0x4e, 0x16, 0x33, 0x5b, 0xd7, 0x81, 0x3e, 0xce, 0xa7, 0x3e, 0x46, 0xf9, + 0x05, 0xdb, 0xef, 0x45, 0xc9, 0x57, 0x3e, 0x24, 0xe3, 0x2d, 0xed, 0xde, + 0xfd, 0x7a, 0x6e, 0x2e, 0x03, 0x67, 0x2d, 0x2a, 0x3b, 0xfa, 0xc4, 0x3a, + 0xea, 0xb7, 0xdd, 0x45, 0x05, 0x5e, 0x56, 0xbf, 0x88, 0x07, 0x36, 0x6e, + 0xad, 0xb6, 0x51, 0xf6, 0xa6, 0x58, 0xae, 0xc1, 0xe9, 0x1d, 0x5d, 0x85, + 0x79, 0xdc, 0x05, 0xfd, 0xe9, 0xc0, 0x46, 0x22, 0xae, 0x1b, 0x9c, 0x3d, + 0xa3, 0x79, 0xf4, 0xc8, 0x7d, 0xd6, 0xbc, 0xf7, 0xf0, 0x30, 0xc6, 0xa8, + 0xe5, 0x2b, 0x78, 0xf7, 0x12, 0xd7, 0xdb, 0x83, 0x49, 0xd8, 0x06, 0xb9, + 0xae, 0x7f, 0x67, 0xd7, 0xab, 0xa7, 0xaf, 0xb0, 0x5e, 0xed, 0xc9, 0x23, + 0x15, 0x7d, 0x6f, 0x48, 0xe7, 0xb8, 0xe2, 0x3a, 0x6e, 0xf3, 0x55, 0x7a, + 0x7e, 0x54, 0x87, 0xdd, 0x1b, 0x78, 0x72, 0x9d, 0xbd, 0xd3, 0x06, 0x70, + 0x5c, 0x05, 0x18, 0x36, 0x62, 0xfc, 0x84, 0xc1, 0xd4, 0x11, 0x75, 0x4b, + 0x9c, 0x3a, 0x70, 0x56, 0x4e, 0xaf, 0x0b, 0xf7, 0x7b, 0xa0, 0x1d, 0xc8, + 0xb5, 0x47, 0xe3, 0x46, 0x37, 0xae, 0x5d, 0xa6, 0x9d, 0x70, 0x3c, 0x8e, + 0x1d, 0x0f, 0x69, 0x75, 0x43, 0x0b, 0xfd, 0x89, 0x59, 0xa9, 0x5b, 0x54, + 0x9e, 0xf1, 0xfc, 0x5d, 0xad, 0x66, 0xdf, 0x11, 0xcb, 0x7a, 0xb0, 0x4b, + 0x69, 0xe3, 0x12, 0x77, 0x7a, 0xae, 0x8a, 0xdc, 0x5b, 0x9c, 0xf3, 0x2f, + 0x43, 0x9e, 0x5c, 0xeb, 0xbd, 0x4d, 0x91, 0xf6, 0x42, 0xfc, 0x12, 0xb7, + 0x09, 0xe0, 0x95, 0x71, 0x95, 0xd3, 0x41, 0x66, 0x80, 0x7c, 0xc5, 0x36, + 0x98, 0xff, 0xa2, 0x8e, 0xe5, 0x0e, 0xa6, 0x18, 0x27, 0x6a, 0x3f, 0x71, + 0x87, 0x0a, 0x65, 0xd3, 0x2c, 0xd7, 0x10, 0x1c, 0xde, 0x21, 0xba, 0x0b, + 0x1d, 0x5e, 0x9c, 0x52, 0xce, 0x37, 0xc7, 0x5c, 0x7c, 0xd7, 0xd8, 0xfb, + 0x42, 0x8d, 0x6e, 0x12, 0xf9, 0xeb, 0x70, 0xbc, 0xf1, 0x3c, 0xe6, 0xfb, + 0x12, 0xe6, 0x7b, 0xf9, 0xfb, 0x41, 0x91, 0x57, 0x46, 0x5e, 0xf9, 0x43, + 0x41, 0xa6, 0x89, 0xf4, 0x47, 0x9a, 0x7b, 0x3d, 0x9f, 0x59, 0xef, 0x63, + 0x02, 0x6c, 0x67, 0xc1, 0x0b, 0x19, 0xae, 0x25, 0x07, 0xc7, 0x52, 0x37, + 0x81, 0x17, 0x76, 0xca, 0x9f, 0xc0, 0x16, 0xf8, 0xe3, 0x4a, 0x1a, 0x3c, + 0xd1, 0x03, 0x1e, 0xe9, 0x06, 0x5f, 0xa4, 0xb4, 0x5d, 0xfc, 0x28, 0x74, + 0xde, 0xd9, 0x4a, 0xc9, 0xd9, 0x3b, 0x5a, 0x74, 0x72, 0xa3, 0x47, 0x41, + 0x17, 0xdc, 0x03, 0xab, 0xae, 0xa9, 0x11, 0x37, 0x3e, 0x29, 0xa4, 0xff, + 0x76, 0xee, 0xed, 0x68, 0x06, 0xae, 0xce, 0x10, 0x57, 0x93, 0x95, 0x2d, + 0xde, 0x3a, 0xf0, 0x41, 0xb3, 0xe6, 0x83, 0x46, 0x27, 0xe3, 0xdd, 0x64, + 0xf9, 0x60, 0x04, 0x7c, 0x50, 0x58, 0xc2, 0x07, 0xcf, 0x58, 0x9a, 0x9f, + 0xae, 0xe2, 0x83, 0x49, 0x9b, 0x36, 0x7e, 0x05, 0x3e, 0xb8, 0xca, 0x4f, + 0x3e, 0x39, 0x24, 0x27, 0xc0, 0x07, 0x0f, 0x6b, 0x3e, 0xb8, 0x4a, 0xf3, + 0x01, 0xe3, 0x46, 0xe4, 0x85, 0x56, 0xc8, 0x0e, 0xf2, 0xc2, 0xb3, 0x32, + 0x0b, 0x5e, 0x78, 0x51, 0xb1, 0xef, 0xcb, 0xb4, 0x0f, 0x46, 0xe9, 0x8f, + 0x9d, 0x2a, 0x15, 0xc1, 0xbb, 0x4a, 0xbe, 0x30, 0x16, 0x04, 0x33, 0xf0, + 0xd1, 0x1f, 0x84, 0x0d, 0xef, 0xea, 0x3b, 0x69, 0xa7, 0x61, 0xbb, 0x10, + 0x36, 0xda, 0xe4, 0xe3, 0x0e, 0xe8, 0xfd, 0xf0, 0x04, 0xc6, 0xb0, 0x47, + 0xfd, 0x3e, 0xfc, 0x60, 0x0f, 0xf3, 0x4a, 0xdb, 0xfe, 0xb8, 0xe6, 0x9b, + 0x1a, 0xe8, 0x80, 0x93, 0xdd, 0x8c, 0x33, 0xf9, 0xde, 0x5e, 0xd5, 0x9e, + 0xef, 0x03, 0xcc, 0x11, 0x75, 0xbf, 0x30, 0xc6, 0xd1, 0xb4, 0xc8, 0xb6, + 0xa7, 0x5c, 0x18, 0x90, 0xfb, 0x6c, 0x5e, 0x3e, 0xa8, 0x83, 0x1d, 0x5a, + 0xa7, 0x8c, 0x5d, 0xae, 0xb6, 0x25, 0xbd, 0xdf, 0x80, 0xd0, 0xac, 0x4d, + 0x9b, 0x3d, 0x81, 0x7d, 0xc5, 0x6a, 0xbb, 0xfe, 0x5e, 0xd8, 0xf5, 0xac, + 0x23, 0xae, 0xb1, 0xeb, 0xef, 0xb2, 0xbc, 0xc6, 0xdf, 0x9e, 0xb6, 0xf1, + 0x0f, 0x00, 0xbe, 0x1d, 0x73, 0x36, 0x3e, 0xdb, 0xa0, 0xad, 0x21, 0x72, + 0x03, 0xec, 0xbc, 0x1b, 0xc1, 0x83, 0x37, 0xc1, 0x8f, 0x7a, 0x77, 0xd1, + 0x93, 0x9d, 0xc5, 0x66, 0xf8, 0xdb, 0xad, 0xf2, 0xab, 0x63, 0x1b, 0xa5, + 0x7f, 0xf4, 0x77, 0x9a, 0xa1, 0x57, 0x61, 0x97, 0xbe, 0x08, 0x38, 0x23, + 0x56, 0x56, 0x47, 0xc1, 0x03, 0xed, 0x89, 0x1f, 0xa8, 0x44, 0xab, 0x91, + 0xed, 0x3c, 0x4b, 0xbe, 0x5c, 0x3b, 0x31, 0xd4, 0x67, 0x1c, 0xa5, 0x45, + 0xce, 0x1c, 0xa7, 0xe7, 0x95, 0x80, 0x2d, 0x9e, 0x82, 0x1d, 0xb2, 0x01, + 0xed, 0x31, 0x96, 0xbc, 0x5a, 0x9e, 0xd9, 0xea, 0xde, 0x9d, 0xd3, 0x7c, + 0x78, 0xc9, 0xc9, 0x8e, 0xdd, 0x24, 0x85, 0xc1, 0x28, 0xc6, 0xa0, 0x9a, + 0xd7, 0xca, 0xf5, 0xd2, 0xaf, 0xc7, 0x73, 0x59, 0x0e, 0x42, 0x1f, 0xff, + 0x69, 0xb1, 0x5f, 0x66, 0x07, 0x9a, 0xf0, 0x1d, 0x95, 0x67, 0x8a, 0x5b, + 0xe0, 0xef, 0xfc, 0x0a, 0x70, 0x54, 0x8b, 0xef, 0x5a, 0xe9, 0x5d, 0x47, + 0x5e, 0x6d, 0x90, 0x19, 0xa4, 0xdf, 0x28, 0xbf, 0x64, 0xd3, 0x99, 0x46, + 0xde, 0x68, 0x40, 0xdd, 0xa8, 0x9c, 0x2f, 0xd2, 0x96, 0xd4, 0x3c, 0xd1, + 0xf3, 0xb2, 0x6c, 0xc9, 0xbc, 0x0c, 0xdb, 0xf4, 0x59, 0x3c, 0xcf, 0x4b, + 0x72, 0xe7, 0x6e, 0x67, 0x4b, 0xa2, 0xdd, 0x81, 0xbe, 0xc4, 0xe3, 0x3a, + 0x5b, 0xbc, 0x5a, 0xe7, 0x5a, 0xdb, 0x46, 0x8d, 0x3c, 0x3f, 0xa8, 0xe2, + 0x0d, 0x98, 0x93, 0xcd, 0x4e, 0x87, 0x4d, 0xe3, 0xb7, 0xbe, 0x2f, 0x51, + 0xda, 0xcf, 0xa8, 0x0d, 0xab, 0x44, 0xda, 0x1a, 0x60, 0xe7, 0xec, 0x11, + 0xd5, 0xdc, 0x20, 0xae, 0xb4, 0x4f, 0xa8, 0x56, 0xa4, 0xf9, 0x36, 0x2d, + 0xd6, 0x00, 0x9d, 0x80, 0xb4, 0x16, 0xa4, 0x6d, 0xb2, 0x69, 0x4d, 0x0d, + 0x52, 0x8b, 0xb4, 0xcb, 0x9a, 0xe7, 0x2f, 0x76, 0xf8, 0x5e, 0xce, 0xa9, + 0x97, 0xb6, 0x53, 0x0d, 0x90, 0x0d, 0xab, 0x65, 0x66, 0x6b, 0x9d, 0xb4, + 0x21, 0x8f, 0x31, 0xee, 0xd4, 0xa9, 0xa8, 0xbc, 0xf3, 0x54, 0x7b, 0xfc, + 0xa3, 0x18, 0x43, 0xfb, 0x19, 0xc6, 0xbc, 0xff, 0xac, 0x99, 0x31, 0x9f, + 0xb6, 0x33, 0x7c, 0xd7, 0x69, 0xf9, 0x43, 0x7c, 0x98, 0x3b, 0xdf, 0x60, + 0x63, 0x94, 0x8e, 0x3b, 0xc3, 0xa3, 0xd4, 0xdb, 0xed, 0xf6, 0x7e, 0xa2, + 0xff, 0xd9, 0x4c, 0x5f, 0x6d, 0x82, 0x36, 0x54, 0x89, 0xfc, 0x48, 0xdd, + 0x83, 0xf7, 0xb8, 0x23, 0x85, 0x79, 0x99, 0x35, 0x45, 0xbe, 0x3a, 0xae, + 0xb8, 0x4f, 0x05, 0x69, 0x95, 0x77, 0x05, 0x66, 0x8e, 0xc9, 0x0b, 0x46, + 0x2e, 0xfd, 0x9a, 0x91, 0x4b, 0xa7, 0xcf, 0x2d, 0x90, 0x4b, 0x05, 0x2d, + 0x97, 0x06, 0x05, 0xef, 0xa9, 0x02, 0xe4, 0xd2, 0x08, 0xbe, 0x3d, 0x2d, + 0x97, 0x62, 0x62, 0x6d, 0x64, 0x89, 0x5e, 0xc5, 0xfe, 0x27, 0x4b, 0xae, + 0xb6, 0xa5, 0x0a, 0xe3, 0xb0, 0x43, 0x4a, 0x23, 0x56, 0x67, 0x4b, 0xba, + 0x49, 0x3a, 0x7a, 0x7e, 0x2a, 0xa1, 0x9d, 0x39, 0xdb, 0xcc, 0x3b, 0x8f, + 0x5f, 0x54, 0x94, 0x61, 0x27, 0x20, 0xc3, 0x1e, 0xbe, 0x82, 0x0c, 0x43, + 0x5e, 0x19, 0x79, 0x65, 0xb6, 0xfb, 0xdd, 0x9f, 0x0e, 0x79, 0x94, 0x1f, + 0x94, 0x19, 0x90, 0x49, 0x25, 0xc8, 0xa4, 0x12, 0xe4, 0x54, 0x09, 0x72, + 0xa9, 0x04, 0xb9, 0x54, 0x82, 0x5c, 0x2a, 0x41, 0x2e, 0x41, 0xc6, 0x3d, + 0x0a, 0x19, 0x67, 0x64, 0xda, 0x00, 0xed, 0x35, 0xb9, 0xcf, 0xea, 0x77, + 0x13, 0x27, 0xe9, 0xb2, 0x7e, 0x91, 0xd9, 0xb3, 0x7a, 0xae, 0x2a, 0x2e, + 0xb8, 0xeb, 0x88, 0xe6, 0x77, 0xcf, 0x57, 0xd7, 0x3a, 0xdc, 0x1f, 0xf3, + 0x03, 0xed, 0xb3, 0x6f, 0xe6, 0x6f, 0xa9, 0x03, 0x5f, 0xbf, 0x62, 0xf9, + 0x7a, 0xf3, 0x1c, 0x5f, 0x27, 0x1d, 0xc6, 0x89, 0x97, 0xe7, 0xeb, 0x16, + 0x9b, 0x97, 0x0f, 0x56, 0x80, 0xaf, 0x57, 0x2c, 0xe2, 0xeb, 0x28, 0xf8, + 0x7a, 0xe7, 0x12, 0xbe, 0x5e, 0xe5, 0xf4, 0xea, 0x3a, 0x3c, 0x83, 0xc6, + 0xef, 0x5a, 0x67, 0x9e, 0xaf, 0xf7, 0x6b, 0xbe, 0x3e, 0x04, 0xbe, 0xbe, + 0xbe, 0x8a, 0xaf, 0x77, 0x4a, 0xf2, 0x96, 0x6c, 0x64, 0xa3, 0xec, 0xbe, + 0x5f, 0x35, 0xaf, 0x91, 0x7f, 0x11, 0x53, 0xdf, 0xf0, 0x58, 0xef, 0x58, + 0xb3, 0xe4, 0x1e, 0xfa, 0x11, 0xd7, 0x06, 0xc8, 0x23, 0x43, 0x19, 0xc7, + 0x93, 0x83, 0x47, 0x7e, 0x20, 0xd3, 0x9a, 0xb7, 0x44, 0xf6, 0x1c, 0x89, + 0xca, 0xf0, 0x11, 0xc6, 0x1e, 0xbe, 0x63, 0xe9, 0xbd, 0x4e, 0x86, 0x07, + 0xb9, 0x5f, 0xd2, 0x95, 0xdd, 0x47, 0xe0, 0x63, 0x1d, 0x61, 0xec, 0xe1, + 0xf2, 0x1c, 0x8f, 0x4d, 0x43, 0xb6, 0xec, 0x3e, 0xa2, 0xe7, 0x1a, 0xed, + 0x34, 0xc8, 0xa1, 0x23, 0x22, 0xb7, 0x1d, 0x71, 0xe5, 0xf6, 0x23, 0x73, + 0xbc, 0x36, 0x10, 0xf2, 0xda, 0x9f, 0x83, 0xd7, 0xda, 0x2d, 0xaf, 0xa9, + 0x39, 0x5e, 0xfb, 0x5a, 0x15, 0xaf, 0xb1, 0x3e, 0x79, 0xed, 0x82, 0x4d, + 0xe3, 0xb7, 0x2b, 0x7b, 0x8f, 0xb4, 0xca, 0xee, 0x87, 0xde, 0x22, 0x7b, + 0xee, 0x27, 0xac, 0xe6, 0x9e, 0x3c, 0xda, 0x5f, 0xe3, 0x95, 0x76, 0xb4, + 0x1f, 0xee, 0x0f, 0xd2, 0x77, 0x65, 0x75, 0x4e, 0x48, 0x32, 0xcf, 0xfe, + 0x6a, 0xe1, 0x3b, 0x9f, 0x82, 0x4f, 0xb1, 0x17, 0x30, 0xdd, 0x7a, 0x44, + 0x92, 0xae, 0xbc, 0x26, 0x23, 0xa9, 0x47, 0x5b, 0x8d, 0x3d, 0x71, 0x09, + 0xbc, 0x42, 0xfa, 0xcf, 0x48, 0xee, 0xed, 0x81, 0xf6, 0x2b, 0x46, 0xcb, + 0x42, 0xff, 0x9f, 0x31, 0x73, 0xc7, 0xdc, 0x77, 0xc7, 0xf3, 0xbe, 0x35, + 0xfa, 0xbc, 0x9b, 0x8e, 0xd7, 0x76, 0x33, 0xbf, 0x46, 0xef, 0x37, 0xcd, + 0xe9, 0xb3, 0xdc, 0xac, 0xcf, 0x76, 0x62, 0x3a, 0x9e, 0x5e, 0x28, 0xf3, + 0x8e, 0x30, 0xde, 0xbd, 0xcc, 0xbb, 0x06, 0xff, 0xf8, 0x2a, 0x13, 0x9b, + 0x25, 0xdf, 0x7d, 0xdd, 0xc9, 0x15, 0x2f, 0xe9, 0x7d, 0x85, 0x59, 0x1f, + 0xbf, 0xcb, 0xfc, 0x66, 0xf9, 0x4b, 0x8c, 0x71, 0x24, 0x12, 0xea, 0x81, + 0x56, 0xee, 0x3b, 0x18, 0x9c, 0x32, 0x76, 0x94, 0xe1, 0xd1, 0x06, 0xed, + 0x6b, 0x8c, 0xe0, 0x7b, 0xf7, 0x68, 0xa3, 0x53, 0xa0, 0x6d, 0x32, 0xd0, + 0xe0, 0xe4, 0xc7, 0xf7, 0xb4, 0x1a, 0x9b, 0x79, 0x20, 0xce, 0x3d, 0x85, + 0x19, 0xb5, 0x54, 0x26, 0x9f, 0x92, 0x50, 0x26, 0x27, 0x6f, 0xc9, 0xc0, + 0xb6, 0xce, 0x1d, 0xd1, 0xf7, 0xf7, 0x25, 0xda, 0x15, 0xc7, 0xf4, 0x09, + 0xc8, 0xd7, 0x90, 0x16, 0xe2, 0xf2, 0xf1, 0x23, 0xa4, 0x07, 0x15, 0x6b, + 0x94, 0xdf, 0xb2, 0xf4, 0x70, 0x59, 0x8a, 0x90, 0x3b, 0x47, 0x8e, 0xdc, + 0x2e, 0xe3, 0xbb, 0x16, 0xd3, 0xc3, 0x9e, 0x79, 0x7a, 0x88, 0xc1, 0x3e, + 0x73, 0xaa, 0xe9, 0xe1, 0x37, 0xe7, 0xe8, 0x61, 0xdc, 0xf9, 0xd7, 0xd2, + 0xc3, 0x0d, 0x0b, 0xe8, 0x61, 0x44, 0xd3, 0x43, 0xff, 0x1c, 0x3d, 0x8c, + 0x1c, 0x61, 0xbf, 0x7a, 0x5d, 0xd4, 0x9b, 0x71, 0x38, 0xe7, 0x73, 0xb4, + 0x90, 0x18, 0xd6, 0xfb, 0x44, 0x93, 0x79, 0x9e, 0x25, 0x5d, 0xa5, 0x18, + 0x1b, 0x99, 0x9f, 0xff, 0xc6, 0x7f, 0xd3, 0xf9, 0x7f, 0x47, 0xfc, 0xff, + 0xef, 0xfc, 0x5f, 0x8f, 0xf6, 0x29, 0x8b, 0x43, 0x79, 0x1c, 0xd2, 0xc3, + 0x7b, 0xe2, 0x46, 0x2f, 0x70, 0x8e, 0xf9, 0x6d, 0xf6, 0xac, 0x9f, 0x83, + 0xfc, 0x7b, 0x1c, 0xf2, 0xef, 0xb1, 0x05, 0xeb, 0x01, 0x3d, 0x36, 0x06, + 0x11, 0xc8, 0xc1, 0xd4, 0x3c, 0x3e, 0x66, 0xba, 0x89, 0x0f, 0xb3, 0xf7, + 0xe4, 0x6c, 0x65, 0x31, 0x4e, 0x5c, 0xbd, 0xdf, 0xe8, 0x64, 0xaa, 0x1a, + 0x27, 0x84, 0x7b, 0xb6, 0x6a, 0x8c, 0xf8, 0x5d, 0xe6, 0xf7, 0x65, 0xbd, + 0x87, 0xa4, 0xa0, 0xd7, 0x9f, 0x88, 0x17, 0xae, 0x3f, 0x11, 0x27, 0xae, + 0xb6, 0xf7, 0x0b, 0xe5, 0x3a, 0xbd, 0x2f, 0xfc, 0xc0, 0x54, 0x4c, 0x66, + 0x62, 0x8c, 0xeb, 0xf1, 0xde, 0x57, 0xfa, 0xca, 0x7e, 0xbc, 0x20, 0x79, + 0x7b, 0xd6, 0x67, 0x95, 0xa5, 0x6d, 0xc6, 0x03, 0x79, 0x27, 0x42, 0xb8, + 0x0e, 0xd1, 0x69, 0x65, 0x5d, 0x43, 0x55, 0x9c, 0x12, 0x78, 0x1f, 0x93, + 0x44, 0xb6, 0x1b, 0xef, 0x29, 0xf6, 0xfd, 0xa4, 0x8c, 0x3c, 0x58, 0x86, + 0x2d, 0xf7, 0x30, 0x74, 0x8e, 0x23, 0x10, 0x93, 0xfa, 0x2e, 0x14, 0xc2, + 0x30, 0xa1, 0xef, 0xf5, 0xa3, 0xdf, 0x47, 0x7a, 0x88, 0xe3, 0xfb, 0xb2, + 0x8d, 0x25, 0xc5, 0xa5, 0x50, 0xfc, 0x01, 0xe0, 0xe7, 0x1d, 0x94, 0x3f, + 0xc2, 0xfb, 0x8d, 0xe6, 0xc3, 0xf8, 0x21, 0x03, 0xfa, 0xcd, 0xb9, 0x79, + 0xcd, 0xc9, 0x94, 0xcd, 0xfe, 0x96, 0xaa, 0xfb, 0xf5, 0xe5, 0xb0, 0xb6, + 0x9f, 0xd3, 0x76, 0x5f, 0x0b, 0xcf, 0xe7, 0x19, 0x1b, 0xfa, 0xcb, 0xb0, + 0xa1, 0x9f, 0xa8, 0x64, 0xf4, 0x1a, 0xd6, 0x63, 0xb0, 0xa1, 0x1f, 0x85, + 0xee, 0xa1, 0xce, 0x89, 0x59, 0x9d, 0x33, 0xa2, 0x76, 0x69, 0x9d, 0xf3, + 0xd7, 0x5a, 0xe7, 0xfc, 0xea, 0x12, 0x9d, 0x73, 0x48, 0xb5, 0x8f, 0x52, + 0xe7, 0xf4, 0xaa, 0x9d, 0x0e, 0xed, 0xc5, 0xb5, 0xcb, 0xe8, 0x9c, 0xf7, + 0xca, 0xaf, 0xd8, 0xbc, 0xfd, 0xf2, 0xbe, 0x6d, 0x7a, 0xdd, 0xc6, 0x9b, + 0x50, 0xbc, 0xcb, 0xce, 0xe8, 0xa0, 0xeb, 0x55, 0xa7, 0x5e, 0xef, 0xfd, + 0x6a, 0x95, 0xce, 0x69, 0x53, 0xdd, 0x4e, 0xaf, 0xae, 0xc3, 0x78, 0x04, + 0xbf, 0x53, 0x4e, 0x66, 0xa0, 0x0e, 0xdf, 0x71, 0x89, 0x1c, 0xc1, 0xd8, + 0xcd, 0x7d, 0x7b, 0xca, 0xe4, 0x5d, 0x63, 0xf3, 0x54, 0x98, 0xee, 0x9a, + 0xf4, 0x76, 0x9b, 0x6e, 0x74, 0x55, 0x9b, 0x6a, 0xd5, 0xba, 0x6a, 0x33, + 0x18, 0x6a, 0x02, 0xfa, 0x75, 0xa2, 0x14, 0xea, 0x2c, 0xfe, 0x66, 0xbc, + 0x99, 0x71, 0x89, 0x30, 0x6e, 0x9d, 0x40, 0x19, 0x3c, 0xa5, 0xd0, 0xa6, + 0xe4, 0x6f, 0xf8, 0x0a, 0x78, 0xa6, 0x80, 0xd7, 0x5b, 0xc0, 0x3f, 0xbf, + 0x5e, 0x64, 0xdc, 0xb3, 0x59, 0x8e, 0x8e, 0x55, 0xe7, 0xb5, 0xca, 0xbb, + 0xc7, 0x36, 0xc8, 0xbe, 0x51, 0xff, 0x6a, 0xa9, 0xdf, 0x28, 0x23, 0xa3, + 0x2f, 0xea, 0xfb, 0x40, 0xd6, 0xe8, 0x7b, 0x92, 0x78, 0x7f, 0x98, 0x91, + 0x91, 0xfd, 0x8e, 0x91, 0x91, 0x19, 0x35, 0x6f, 0xb3, 0x86, 0x6d, 0xf2, + 0x6e, 0xa6, 0xbe, 0xd1, 0xb8, 0xbe, 0x43, 0x7a, 0xa2, 0x72, 0xad, 0xfc, + 0xd1, 0x71, 0x75, 0xa7, 0x9a, 0xbf, 0x4b, 0x41, 0xdb, 0xac, 0x93, 0x0b, + 0x6c, 0xd6, 0xbf, 0x97, 0x99, 0xf7, 0x45, 0x31, 0x4e, 0xd0, 0xf0, 0x75, + 0x2f, 0x73, 0x1d, 0xb4, 0x39, 0x26, 0x97, 0xa4, 0x4f, 0xe3, 0x8f, 0xf2, + 0xb4, 0x01, 0x72, 0x70, 0x56, 0xeb, 0xd7, 0xb5, 0xbc, 0xf3, 0xf8, 0x08, + 0x6d, 0xd7, 0xaf, 0x6b, 0x79, 0xb6, 0xd6, 0xda, 0xae, 0xd3, 0x90, 0xd3, + 0x94, 0xa3, 0x37, 0xca, 0x5f, 0xdb, 0x74, 0xa6, 0x25, 0xe3, 0xb3, 0x42, + 0x7d, 0x17, 0x83, 0x0c, 0xa5, 0x3c, 0xfd, 0x59, 0x6d, 0xd7, 0xe7, 0x6c, + 0x1b, 0x94, 0x9f, 0x46, 0x76, 0x6f, 0x76, 0xa6, 0x6d, 0x1a, 0xbf, 0xc3, + 0x18, 0xba, 0x9f, 0xc9, 0x59, 0x3e, 0x53, 0xce, 0x93, 0xc8, 0x5f, 0x83, + 0x7c, 0xf2, 0xd9, 0x63, 0x9a, 0xcf, 0xb4, 0x7d, 0xe2, 0x74, 0xd9, 0x35, + 0x85, 0xb9, 0xf5, 0x80, 0x3c, 0xf9, 0x4c, 0x1d, 0xf5, 0xa6, 0x8d, 0x3c, + 0xf0, 0x90, 0xfe, 0x45, 0xe8, 0x0e, 0xd6, 0x45, 0xfa, 0xb1, 0x0c, 0xe6, + 0xf0, 0x24, 0xfc, 0x9f, 0x46, 0x7c, 0x37, 0xe3, 0x7b, 0x42, 0x7e, 0x75, + 0x30, 0xaa, 0xc7, 0x3d, 0x82, 0x71, 0x1c, 0x38, 0x82, 0x31, 0x39, 0xc6, + 0x76, 0x76, 0xcf, 0xb8, 0x52, 0x73, 0x86, 0x7c, 0xc7, 0x33, 0x86, 0x41, + 0xb0, 0xb7, 0x8b, 0x74, 0x9b, 0xf4, 0xfa, 0xf5, 0xf9, 0xb7, 0xcd, 0xf1, + 0x08, 0x70, 0x72, 0x00, 0xf3, 0x31, 0x52, 0xf4, 0xbd, 0xac, 0xe3, 0xc7, + 0x31, 0x4e, 0xd8, 0x80, 0xed, 0xb0, 0x05, 0xdb, 0x61, 0x07, 0xb6, 0xc3, + 0x0e, 0x5c, 0x2d, 0xa7, 0xb6, 0x72, 0x7f, 0x49, 0xfe, 0x9d, 0xbc, 0x77, + 0xf9, 0x1b, 0x3a, 0x36, 0x5f, 0x7b, 0x4b, 0x1f, 0x7c, 0x76, 0xf1, 0x92, + 0x03, 0xdc, 0x63, 0x3f, 0xeb, 0xd5, 0xde, 0xd2, 0x2f, 0xed, 0x3d, 0xc8, + 0xef, 0xb9, 0x24, 0x1d, 0xb7, 0x7c, 0xd8, 0xa9, 0x1d, 0xe8, 0x03, 0x1e, + 0x33, 0x4e, 0x32, 0x3e, 0xe4, 0x30, 0x4e, 0x91, 0xdd, 0x1c, 0xd1, 0x67, + 0xc4, 0xa6, 0x19, 0x8b, 0xb8, 0xa5, 0x3d, 0xb2, 0x25, 0xb1, 0xdb, 0x49, + 0x0e, 0xa8, 0x48, 0x72, 0xa0, 0xcf, 0x09, 0xcb, 0xf1, 0x0e, 0x6a, 0xc8, + 0x19, 0xc0, 0x7a, 0xa0, 0xf4, 0x75, 0xd0, 0xd3, 0x79, 0x29, 0x1c, 0x6f, + 0x90, 0xa9, 0x62, 0xbb, 0x97, 0x55, 0x31, 0xe1, 0xbe, 0x12, 0x75, 0x0a, + 0x44, 0x7f, 0x26, 0x2a, 0x13, 0xa3, 0x1b, 0x45, 0x69, 0xdb, 0xbd, 0x45, + 0xb2, 0x63, 0xa3, 0x72, 0xbe, 0x5b, 0x9a, 0x14, 0xda, 0xe7, 0xdd, 0xde, + 0xea, 0x14, 0xd7, 0x11, 0x43, 0x5e, 0x58, 0x4f, 0x3e, 0x19, 0x05, 0x0e, + 0x41, 0xb7, 0x8c, 0xeb, 0xd6, 0x09, 0xe5, 0xde, 0xed, 0x3a, 0x66, 0xca, + 0x38, 0x6d, 0xf5, 0x7a, 0x03, 0xf9, 0x23, 0xba, 0x2c, 0x7f, 0x4c, 0x96, + 0xb8, 0x36, 0x23, 0x79, 0x97, 0x71, 0x61, 0x1f, 0xbf, 0xc7, 0x59, 0xb6, + 0x4e, 0x46, 0xba, 0xf3, 0x76, 0x8f, 0xc7, 0x37, 0xc1, 0x07, 0x1c, 0x9f, + 0x5e, 0x27, 0x01, 0xaf, 0x2f, 0x5e, 0xcf, 0x88, 0x56, 0xc9, 0x03, 0x47, + 0x66, 0x46, 0xc3, 0xf5, 0x0f, 0xb6, 0x87, 0xef, 0x71, 0x23, 0x6f, 0xb3, + 0x4b, 0xea, 0x11, 0x2e, 0xae, 0x55, 0x2e, 0x94, 0xb1, 0x4a, 0x9f, 0x13, + 0xf6, 0xb4, 0x7c, 0x3d, 0x5d, 0x31, 0xb2, 0x75, 0xbc, 0x12, 0xea, 0x96, + 0xa8, 0xd1, 0xa5, 0x4b, 0xf4, 0x89, 0x89, 0x60, 0xce, 0xeb, 0x93, 0x4b, + 0x3a, 0x46, 0xf7, 0x6b, 0x53, 0x2d, 0xe2, 0x1e, 0x93, 0xd9, 0x11, 0xff, + 0x54, 0x2b, 0xf7, 0x69, 0x8c, 0xa4, 0xde, 0x8c, 0x7e, 0x8c, 0xb5, 0x50, + 0x1f, 0x0e, 0xa9, 0xb5, 0x78, 0xaf, 0xd1, 0xf4, 0x07, 0x9e, 0xc2, 0xb7, + 0xf1, 0x13, 0xbe, 0x0c, 0x3f, 0xe1, 0x09, 0xe8, 0xba, 0x73, 0xf0, 0x13, + 0x1e, 0x87, 0x9f, 0xf0, 0x18, 0xfc, 0x84, 0x47, 0xa1, 0x27, 0xab, 0xfd, + 0x83, 0xe1, 0x05, 0xfe, 0x41, 0xa0, 0xf9, 0x9f, 0x31, 0xc0, 0xc7, 0xab, + 0x7c, 0x83, 0xbd, 0x46, 0x5f, 0xc1, 0xef, 0x37, 0x7c, 0xd4, 0xa6, 0x6e, + 0xd6, 0xfa, 0xd1, 0xec, 0xd9, 0x1d, 0x98, 0xd3, 0x57, 0x6d, 0xca, 0xe8, + 0xab, 0x89, 0x79, 0x7d, 0x65, 0xf8, 0xe8, 0xd8, 0xa8, 0x44, 0xfc, 0xd1, + 0xe9, 0x6c, 0x6a, 0xbb, 0xe6, 0xa1, 0x26, 0x7f, 0xa3, 0x44, 0x1e, 0x50, + 0xcd, 0x35, 0x92, 0xb5, 0xdf, 0xa0, 0xaf, 0xa3, 0x5f, 0x47, 0x5b, 0xef, + 0x94, 0x9c, 0xb6, 0xcf, 0xae, 0x8c, 0xef, 0x47, 0x17, 0xe1, 0xbb, 0x50, + 0x7a, 0x56, 0xe3, 0xfc, 0x7e, 0x7d, 0x26, 0xbf, 0x41, 0x86, 0xcb, 0x21, + 0xce, 0x79, 0x06, 0x8e, 0xfb, 0x30, 0x5a, 0x25, 0x72, 0xac, 0x45, 0xfa, + 0x53, 0xa2, 0x72, 0xa9, 0x95, 0x7a, 0xff, 0xca, 0xa9, 0x6e, 0x89, 0xe7, + 0xba, 0x49, 0xab, 0xf7, 0xc9, 0x84, 0x9e, 0x8b, 0x16, 0xa9, 0x39, 0x46, + 0x1b, 0x25, 0x5c, 0xc3, 0xbb, 0xbd, 0xc5, 0xde, 0x41, 0x1d, 0x35, 0xe5, + 0x44, 0x0e, 0xea, 0xf9, 0x9a, 0xd5, 0x7b, 0x0c, 0x6f, 0x9e, 0x62, 0x2c, + 0x9e, 0xf7, 0xfd, 0x31, 0x0e, 0xff, 0xaf, 0x99, 0xbf, 0x42, 0x8b, 0xb1, + 0x67, 0xd6, 0x58, 0x3b, 0xc6, 0xc4, 0xa9, 0x96, 0xb7, 0x61, 0xd8, 0x4e, + 0xf5, 0x1d, 0xb5, 0xab, 0xe0, 0x03, 0x37, 0xa0, 0x4d, 0xae, 0x63, 0xdb, + 0xbf, 0x17, 0xe4, 0xfd, 0xb3, 0x73, 0xc0, 0x5f, 0x85, 0xb4, 0x06, 0xe4, + 0x31, 0x66, 0xf3, 0x85, 0x16, 0xc6, 0x65, 0xb3, 0x7e, 0xa3, 0x4d, 0x5b, + 0xe5, 0x8c, 0x8c, 0xb6, 0xc3, 0x37, 0xe7, 0x39, 0x76, 0xe6, 0xf7, 0x73, + 0xee, 0x84, 0x7f, 0xab, 0x69, 0x12, 0xf2, 0x67, 0x8f, 0x5c, 0x6b, 0xe3, + 0xce, 0xd4, 0xc3, 0xbf, 0xb8, 0x60, 0xbd, 0xf6, 0x10, 0xf4, 0xd8, 0xad, + 0x90, 0x47, 0xd4, 0xc3, 0x87, 0xe4, 0x17, 0x2c, 0x3d, 0x2f, 0xd4, 0xc3, + 0x17, 0x85, 0xb1, 0xe1, 0x2e, 0xe4, 0xe5, 0x83, 0x28, 0xe8, 0xe1, 0x70, + 0x95, 0xaf, 0x46, 0xbf, 0xaf, 0x2e, 0x6d, 0xd6, 0xc0, 0x16, 0xfa, 0x7d, + 0x90, 0x03, 0xb1, 0xd0, 0xcf, 0xab, 0x9d, 0x5b, 0xa3, 0xdd, 0x69, 0xeb, + 0x8e, 0xa4, 0x5e, 0x22, 0x8e, 0x12, 0x87, 0xe4, 0xf6, 0xf5, 0xbc, 0x26, + 0xcf, 0xf5, 0xbf, 0xa5, 0x71, 0x26, 0x8a, 0xb4, 0xb7, 0x46, 0xc3, 0x68, + 0xe5, 0x7c, 0x22, 0xdc, 0xbf, 0x51, 0xb0, 0x75, 0xf7, 0xd8, 0xf5, 0xf8, + 0x82, 0x7c, 0x9b, 0x71, 0xce, 0x44, 0x5f, 0x64, 0x25, 0xcf, 0x64, 0xa3, + 0xee, 0xed, 0xda, 0x6f, 0xcf, 0x48, 0xd8, 0x16, 0xbf, 0x6b, 0xaa, 0xda, + 0xa6, 0x1d, 0xc5, 0xf7, 0xe2, 0xfb, 0x1b, 0x9e, 0xd7, 0x6b, 0x8b, 0xe6, + 0x6e, 0x9a, 0x90, 0x4f, 0xc8, 0x3b, 0x09, 0x7d, 0x8e, 0xc9, 0x3f, 0x46, + 0xbb, 0x87, 0xeb, 0xae, 0xde, 0xf4, 0x70, 0xea, 0x23, 0xfa, 0x0e, 0xd5, + 0x71, 0x11, 0xa7, 0x90, 0xda, 0xab, 0xf7, 0x9d, 0x14, 0x74, 0x7c, 0x39, + 0x8f, 0xf7, 0xbc, 0x8f, 0xda, 0x76, 0x8c, 0x7f, 0x0b, 0x88, 0x69, 0x1f, + 0x04, 0x6c, 0xd4, 0x21, 0x94, 0xbd, 0x31, 0x69, 0x3b, 0xfa, 0x7e, 0xcd, + 0x0b, 0x6b, 0xe1, 0x0b, 0xf4, 0x1e, 0x85, 0xae, 0x3e, 0x1a, 0x97, 0xfe, + 0xa3, 0x5a, 0x37, 0x66, 0x96, 0xc6, 0x0a, 0xb6, 0x78, 0x2e, 0xfd, 0x89, + 0x98, 0x27, 0xd7, 0x1c, 0x8d, 0xc8, 0xe1, 0xd8, 0x16, 0xaf, 0xc3, 0xb9, + 0xd1, 0xea, 0x42, 0x43, 0x7f, 0xa0, 0x15, 0xd4, 0x37, 0xeb, 0x90, 0xbd, + 0xf3, 0xb1, 0x6b, 0xd4, 0x7f, 0x49, 0x46, 0xc8, 0x4b, 0x95, 0x88, 0x8c, + 0x0f, 0xb6, 0x02, 0x9e, 0xb7, 0xae, 0x07, 0x0e, 0x40, 0x53, 0x98, 0x1f, + 0xfd, 0xf7, 0x3c, 0xdc, 0x38, 0xe5, 0x57, 0x1b, 0xfa, 0xef, 0x3b, 0x4a, + 0x1d, 0xe6, 0x6b, 0xbe, 0x46, 0xbf, 0x5e, 0x8d, 0xf6, 0x3d, 0xc8, 0x8b, + 0x6f, 0x11, 0xff, 0x01, 0xc8, 0xb5, 0xa3, 0x51, 0xe9, 0x38, 0xda, 0x20, + 0x9b, 0x8e, 0xd2, 0xf7, 0xa8, 0xf6, 0x45, 0x69, 0x8b, 0x5e, 0xc2, 0xb8, + 0x6e, 0x34, 0xf7, 0x0d, 0x4e, 0x45, 0x65, 0x1f, 0xf9, 0x15, 0x65, 0x73, + 0xb0, 0x93, 0xb3, 0x47, 0x3d, 0xbd, 0x16, 0x9a, 0xc5, 0x38, 0xf9, 0x37, + 0x2c, 0xfa, 0x8e, 0x1a, 0x39, 0x53, 0xa0, 0x6f, 0x32, 0xd0, 0x02, 0xbc, + 0x3e, 0x60, 0xf9, 0xe5, 0x3d, 0xeb, 0x2d, 0x5f, 0xfe, 0x9c, 0xfc, 0x96, + 0x5b, 0x6f, 0xe4, 0xe5, 0x87, 0xd6, 0x73, 0x2f, 0xd2, 0x5a, 0x9f, 0xef, + 0x3a, 0x6d, 0x43, 0x18, 0xb9, 0xf9, 0x7a, 0xfc, 0x27, 0xc0, 0x51, 0xb8, + 0xfe, 0x44, 0x3e, 0xe4, 0x1a, 0xb2, 0x3e, 0xb3, 0x92, 0x9a, 0xd1, 0x7f, + 0x53, 0x89, 0x6b, 0x61, 0xf3, 0xf7, 0x59, 0x6d, 0xaf, 0x30, 0x36, 0xfe, + 0x4c, 0xf8, 0x37, 0x9c, 0xaa, 0xf6, 0x19, 0x56, 0xaf, 0x75, 0x31, 0xbe, + 0x34, 0xb7, 0x17, 0x28, 0x18, 0xd5, 0x77, 0xc2, 0xc5, 0x9c, 0x8b, 0xc5, + 0x5a, 0xe7, 0x9b, 0x63, 0x12, 0xb8, 0x7e, 0xdc, 0xf9, 0x96, 0xcf, 0xb5, + 0x71, 0xcf, 0x79, 0xb9, 0xe8, 0x83, 0xf7, 0xfe, 0x02, 0xe3, 0x68, 0x75, + 0x5e, 0xc1, 0x9c, 0x1e, 0x2c, 0x65, 0x92, 0x9e, 0x8d, 0x83, 0x3f, 0x5b, + 0x6c, 0x75, 0x9e, 0x9b, 0x8f, 0x21, 0xf5, 0x84, 0x74, 0x71, 0x88, 0x79, + 0x65, 0xe4, 0x95, 0x19, 0xeb, 0xad, 0x77, 0x26, 0xc7, 0xec, 0x7e, 0x12, + 0xa3, 0x8b, 0xe6, 0xd6, 0x5f, 0x06, 0xf4, 0xfa, 0x84, 0xeb, 0x4c, 0x4e, + 0x4d, 0xaf, 0x37, 0xfb, 0x8a, 0x6a, 0x91, 0x67, 0xf6, 0x58, 0x4e, 0x4c, + 0xd5, 0xa2, 0x4c, 0xbd, 0x33, 0xa1, 0x63, 0x5e, 0xda, 0xf6, 0x70, 0xc6, + 0xa7, 0xea, 0x9d, 0x29, 0xbd, 0xd6, 0x1c, 0x75, 0x4e, 0x8e, 0xb1, 0xed, + 0x28, 0xca, 0x88, 0x73, 0x0a, 0xed, 0x4d, 0x8d, 0xb5, 0xc7, 0xf7, 0x49, + 0x3b, 0x6c, 0x01, 0xfe, 0x8d, 0x34, 0xde, 0x17, 0xe0, 0x3a, 0x53, 0x73, + 0xed, 0x2a, 0xb4, 0xc3, 0xb2, 0xa4, 0x41, 0xf6, 0xeb, 0xa2, 0xfd, 0xa5, + 0x6b, 0x52, 0x4b, 0x71, 0x32, 0x06, 0x9c, 0x1c, 0xb4, 0x38, 0x39, 0x61, + 0x71, 0x32, 0x5a, 0x85, 0x93, 0x87, 0x17, 0xe1, 0xe4, 0x04, 0x70, 0xf2, + 0xf0, 0x15, 0x70, 0x82, 0xbc, 0xf2, 0xc3, 0x16, 0x27, 0xf7, 0x2d, 0xc2, + 0x49, 0x7e, 0x2e, 0x16, 0x6f, 0x70, 0x32, 0x02, 0x9c, 0xd4, 0xb4, 0x1a, + 0xd8, 0x0f, 0x5a, 0x9c, 0xe0, 0x3d, 0x75, 0x10, 0x65, 0xee, 0xab, 0xc2, + 0xc9, 0x41, 0xe0, 0xe4, 0x3e, 0x8b, 0x93, 0xc3, 0x16, 0x27, 0x87, 0x51, + 0x26, 0x0f, 0x9c, 0x14, 0x96, 0xc1, 0xc9, 0x08, 0x70, 0x12, 0xb6, 0x5b, + 0x40, 0x3b, 0x87, 0xab, 0x70, 0x32, 0xb2, 0x0c, 0x4e, 0xb8, 0xe6, 0x1a, + 0xee, 0xe1, 0xbe, 0xfc, 0x06, 0x7b, 0xb8, 0x53, 0x9f, 0x7d, 0xe3, 0x3d, + 0xdc, 0x2c, 0x73, 0xb9, 0xea, 0xcc, 0xfb, 0xb3, 0x76, 0x4f, 0x9a, 0xd9, + 0xfb, 0x37, 0x7f, 0x0f, 0x5e, 0x3b, 0xf8, 0xbc, 0x90, 0xf7, 0xc4, 0xec, + 0x21, 0x75, 0xb7, 0x4d, 0x81, 0xd7, 0x8e, 0xca, 0x81, 0xe3, 0xb5, 0x87, + 0x73, 0x36, 0xcd, 0xdf, 0xd6, 0x9e, 0x57, 0x8a, 0x79, 0xe1, 0xde, 0x83, + 0x17, 0xcd, 0x5d, 0x50, 0x31, 0x9e, 0xc7, 0xa8, 0x5e, 0x7b, 0x7e, 0xd1, + 0xde, 0x55, 0xe4, 0xdd, 0x9b, 0xf5, 0xa7, 0x13, 0xdc, 0x57, 0x55, 0xd0, + 0xf0, 0x72, 0x2d, 0xad, 0x47, 0xef, 0xa5, 0xca, 0x16, 0x69, 0x67, 0x27, + 0xb8, 0x27, 0x0d, 0xf6, 0x31, 0xf7, 0xed, 0x9a, 0x7d, 0xba, 0xbd, 0x0b, + 0xf6, 0xe9, 0x56, 0x9f, 0xef, 0x26, 0xdf, 0xcd, 0xd3, 0xcd, 0xc1, 0xb9, + 0xbb, 0x57, 0x8f, 0x3b, 0xcf, 0xe8, 0xf8, 0x70, 0x3d, 0xe6, 0x27, 0x08, + 0x4e, 0xa7, 0x4c, 0x5c, 0x76, 0x46, 0xc7, 0x65, 0x05, 0x1e, 0xf8, 0xb0, + 0x8d, 0xcd, 0x76, 0xf4, 0x5c, 0x9e, 0x8b, 0xcb, 0x2e, 0xd8, 0xa3, 0xa3, + 0xef, 0xff, 0xc8, 0x8e, 0x5e, 0xd2, 0x7b, 0x71, 0xfa, 0x52, 0x8e, 0x14, + 0x20, 0x23, 0xf6, 0x8c, 0xbf, 0x2a, 0xc3, 0x0f, 0xf2, 0x9b, 0x3a, 0x2d, + 0x02, 0xbd, 0x45, 0xb9, 0x9d, 0x97, 0x6c, 0x0f, 0xd3, 0x4c, 0x9d, 0x3e, + 0xed, 0x23, 0x1f, 0x77, 0x7a, 0xe7, 0xfa, 0x27, 0x7e, 0xc3, 0x35, 0x70, + 0xfe, 0xa6, 0x9d, 0x93, 0x71, 0xb2, 0x15, 0xe6, 0x87, 0x6b, 0xe1, 0x77, + 0xdb, 0xfb, 0x08, 0x99, 0x5f, 0x7d, 0xff, 0xb5, 0xe1, 0xd3, 0xac, 0xfe, + 0x3b, 0x22, 0x23, 0x4e, 0x1f, 0xea, 0x4c, 0x7b, 0x0d, 0x03, 0x2a, 0x7d, + 0xd3, 0x00, 0xcf, 0xca, 0x4d, 0x2c, 0xf9, 0xfb, 0x01, 0xf3, 0xba, 0xb0, + 0xa0, 0xe7, 0x94, 0xfb, 0xb0, 0xa6, 0x41, 0x8b, 0x9a, 0xb6, 0x34, 0xfd, + 0x1f, 0x98, 0xd3, 0x91, 0xd4, 0xad, 0xd4, 0x93, 0xa1, 0x8e, 0x4c, 0xc6, + 0xfb, 0x78, 0x7f, 0x84, 0xa6, 0x71, 0x7b, 0x97, 0xc4, 0xd4, 0x39, 0xad, + 0xdf, 0x47, 0x52, 0xbc, 0x5f, 0x66, 0x99, 0xb2, 0xa3, 0x55, 0x65, 0xf5, + 0xb8, 0x3d, 0xf9, 0x43, 0xcc, 0xcd, 0x17, 0x61, 0x6f, 0xf6, 0x8e, 0xbd, + 0x0a, 0x9f, 0x31, 0x2e, 0x5f, 0x2a, 0xbd, 0x04, 0x7a, 0xcd, 0xaf, 0xb5, + 0x77, 0xe1, 0x65, 0x01, 0x37, 0xcf, 0x38, 0xeb, 0xfd, 0xc3, 0x91, 0x3f, + 0x02, 0x5d, 0xfc, 0xc1, 0x4b, 0xec, 0x03, 0xb0, 0x44, 0x60, 0xcf, 0xc3, + 0x36, 0x18, 0x7f, 0x49, 0xef, 0x95, 0xbb, 0xbe, 0xfc, 0x92, 0x8e, 0x53, + 0xf4, 0x97, 0x5b, 0x65, 0x7b, 0xb9, 0x41, 0x76, 0x40, 0x2f, 0xec, 0x28, + 0xfb, 0x78, 0xa2, 0x72, 0x63, 0xd9, 0xcc, 0xd3, 0x47, 0xca, 0x9c, 0xef, + 0x6d, 0x32, 0x71, 0xbc, 0x9a, 0x66, 0xa7, 0xed, 0xde, 0x31, 0xd2, 0x0f, + 0x9e, 0x52, 0x32, 0x3f, 0xad, 0xc7, 0xce, 0x5d, 0xac, 0xc9, 0xc3, 0xb3, + 0xc2, 0xbd, 0xf8, 0xfc, 0x1b, 0x74, 0xdf, 0x68, 0xe5, 0x19, 0x77, 0xde, + 0x8f, 0xd8, 0x5f, 0x09, 0xf7, 0x86, 0xbf, 0xfe, 0x19, 0x10, 0xfd, 0x77, + 0x5d, 0xf4, 0xde, 0x70, 0x4d, 0x7b, 0xd2, 0x76, 0x26, 0xa6, 0x75, 0x84, + 0xa1, 0xf1, 0xf9, 0xbf, 0xe7, 0x22, 0xf2, 0x7f, 0x01, 0x95, 0xf6, 0x2d, + 0x58, 0xd0, 0x73, 0x00, 0x00, 0x00 }; +static u32 bnx2_CP_b09FwData[(0x50/4) + 1] = { + 0x00010030, 0x00000030, 0x00000000, 0x00000001, 0x00010fd0, 0x00000fd0, + 0x00001430, 0x0000007f, 0x00030400, 0x00001000, 0x00000030, 0x00000020, + 0x00050200, 0x00001000, 0x00000030, 0x00000010, 0x00010400, 0x00000400, + 0x00001030, 0x00000020, 0x00000000 }; +static u32 bnx2_CP_b09FwRodata[(0x118/4) + 1] = { + 0x080005d8, 0x080007f8, 0x0800073c, 0x08000764, 0x0800078c, 0x080007b4, + 0x08000610, 0x080005fc, 0x08000820, 0x08000820, 0x0800062c, 0x08000648, + 0x08000648, 0x08000820, 0x08000660, 0x08000674, 0x08000820, 0x08000688, + 0x08000820, 0x08000820, 0x0800069c, 0x08000820, 0x08000820, 0x08000820, + 0x08000820, 0x08000820, 0x08000820, 0x08000820, 0x08000820, 0x08000820, + 0x08000820, 0x080006b0, 0x08000820, 0x080006c4, 0x080006d8, 0x080006ec, + 0x08000820, 0x08000700, 0x08000714, 0x08000728, 0x08003740, 0x08003758, + 0x08003768, 0x08003778, 0x08003790, 0x080037a8, 0x080037b8, 0x080037c8, + 0x080037e8, 0x080037f8, 0x08003808, 0x08003898, 0x080037d8, 0x08003818, + 0x08003828, 0x08003840, 0x08003860, 0x08003898, 0x08003878, 0x08003878, + 0x080055f0, 0x080055f0, 0x080055f0, 0x080055f0, 0x080055f0, 0x08005618, + 0x08005618, 0x08005640, 0x08005690, 0x08005660, 0x00000000 }; +static u32 bnx2_CP_b09FwBss[(0x870/4) + 1] = { 0x0 }; +static u32 bnx2_CP_b09FwSbss[(0xe9/4) + 1] = { 0x0 }; + +static struct fw_info bnx2_cp_fw_09 = { + .ver_major = 0x1, + .ver_minor = 0x0, + .ver_fix = 0x0, + + .start_addr = 0x0800006c, + + .text_addr = 0x08000000, + .text_len = 0x73cc, + .text_index = 0x0, + .gz_text = bnx2_CP_b09FwText, + .gz_text_len = sizeof(bnx2_CP_b09FwText), + + .data_addr = 0x08007500, + .data_len = 0x50, + .data_index = 0x0, + .data = bnx2_CP_b09FwData, + + .sbss_addr = 0x08007554, + .sbss_len = 0xe9, + .sbss_index = 0x0, + .sbss = bnx2_CP_b09FwSbss, + + .bss_addr = 0x08007640, + .bss_len = 0x870, + .bss_index = 0x0, + .bss = bnx2_CP_b09FwBss, + + .rodata_addr = 0x080073d0, + .rodata_len = 0x118, + .rodata_index = 0x0, + .rodata = bnx2_CP_b09FwRodata, +}; + +static u8 bnx2_RXP_b09FwText[] = { + 0x1f, 0x8b, 0x08, 0x08, 0x19, 0xfd, 0x2f, 0x45, 0x00, 0x03, 0x74, 0x65, + 0x73, 0x74, 0x31, 0x2e, 0x62, 0x69, 0x6e, 0x00, 0xec, 0x5c, 0x6b, 0x6c, + 0x1c, 0xd7, 0x75, 0x3e, 0xf3, 0x20, 0xb5, 0xa2, 0xf8, 0x18, 0x2e, 0x57, + 0xcc, 0x4a, 0x66, 0xec, 0x5d, 0x71, 0x24, 0xb2, 0x16, 0x6b, 0x8c, 0xd8, + 0xad, 0x4d, 0x04, 0x6b, 0x7b, 0x33, 0xbb, 0x92, 0x98, 0x54, 0x85, 0x29, + 0x87, 0x75, 0x0c, 0xc3, 0x75, 0xd9, 0xa5, 0x1a, 0xbb, 0xae, 0x51, 0xc8, + 0x8f, 0xc4, 0x06, 0x6a, 0xd6, 0x9b, 0x25, 0xdd, 0xa8, 0xe9, 0x82, 0x43, + 0x4b, 0xaa, 0xe9, 0x02, 0x69, 0xbb, 0x20, 0xa9, 0xc7, 0x8f, 0x85, 0x56, + 0x76, 0x52, 0xc7, 0xf9, 0xe1, 0x48, 0x50, 0x95, 0x20, 0x28, 0x0c, 0x43, + 0x48, 0x8d, 0xd6, 0x3f, 0xda, 0x40, 0x95, 0x9f, 0x68, 0x92, 0x42, 0x41, + 0x0b, 0xc7, 0x68, 0x6c, 0x4f, 0xbf, 0xef, 0xce, 0x0c, 0xb9, 0xa4, 0x5f, + 0x40, 0x7f, 0xf4, 0x4f, 0xe7, 0x02, 0x8b, 0xb9, 0xf7, 0xce, 0x3d, 0xe7, + 0x9e, 0x7b, 0xde, 0xe7, 0x0e, 0xa5, 0xdf, 0xef, 0x94, 0x0e, 0x09, 0x5b, + 0x17, 0x7e, 0x99, 0xc3, 0x8f, 0x3d, 0x74, 0xc3, 0xd8, 0x0d, 0xa3, 0x22, + 0x7b, 0xf6, 0x18, 0x5b, 0x12, 0x7a, 0x34, 0x1f, 0xb7, 0xb8, 0xc5, 0x2d, + 0x6e, 0x71, 0x8b, 0x5b, 0xdc, 0xe2, 0x16, 0xb7, 0xb8, 0xc5, 0x2d, 0x6e, + 0x71, 0x8b, 0x5b, 0xdc, 0xe2, 0x16, 0xb7, 0xb8, 0xc5, 0x2d, 0x6e, 0x71, + 0x8b, 0x5b, 0xdc, 0xe2, 0x16, 0xb7, 0xb8, 0xc5, 0x2d, 0x6e, 0x71, 0x8b, + 0x5b, 0xdc, 0xe2, 0x16, 0xb7, 0xb8, 0xc5, 0x2d, 0x6e, 0x71, 0x8b, 0x5b, + 0xdc, 0xe2, 0x16, 0xb7, 0xb8, 0xc5, 0x2d, 0x6e, 0x71, 0x8b, 0x5b, 0xdc, + 0xe2, 0xf6, 0xff, 0xbd, 0x19, 0x22, 0x16, 0x9f, 0x5d, 0xe1, 0x4f, 0x12, + 0x7a, 0xfe, 0xf2, 0x1f, 0xba, 0xb6, 0x24, 0x8c, 0xfc, 0xcf, 0x66, 0xa6, + 0x6d, 0x91, 0x42, 0x63, 0x77, 0xa6, 0x28, 0xef, 0xfb, 0x95, 0x94, 0x29, + 0x9c, 0xff, 0x6c, 0xfe, 0xbd, 0xbf, 0x7d, 0xf1, 0xa6, 0xec, 0xd5, 0xba, + 0x21, 0x09, 0x2b, 0x3f, 0xb7, 0xc7, 0xda, 0x25, 0x89, 0x01, 0xc0, 0x7c, + 0x6b, 0xe8, 0xc7, 0xdd, 0xd2, 0x2d, 0x6b, 0x78, 0xec, 0x84, 0x5c, 0x36, + 0x5e, 0xd0, 0xdc, 0xa6, 0xef, 0x9f, 0x70, 0x7c, 0xff, 0x87, 0xf8, 0xbd, + 0xe5, 0x60, 0xec, 0x7d, 0xe0, 0x17, 0x4c, 0x43, 0x74, 0xfb, 0x2f, 0x34, + 0x77, 0xb9, 0x43, 0xaa, 0x8b, 0xa6, 0xcc, 0x7a, 0x29, 0x39, 0xe2, 0x55, + 0xb4, 0x52, 0xb3, 0xa6, 0xed, 0x3d, 0x35, 0xaf, 0xed, 0x3b, 0x75, 0x44, + 0xdb, 0x7f, 0x6a, 0x41, 0x73, 0x4f, 0x49, 0x45, 0xdf, 0xd3, 0x29, 0x05, + 0xeb, 0xb4, 0x56, 0x6c, 0xf6, 0x6b, 0xee, 0xe2, 0x7b, 0xbe, 0xeb, 0x64, + 0xad, 0xbb, 0xc4, 0x2c, 0x80, 0x16, 0x71, 0x6b, 0x3e, 0xc6, 0xa6, 0x14, + 0x52, 0xbe, 0xaf, 0xe7, 0xfd, 0x27, 0xdc, 0x9c, 0x6d, 0xe9, 0x5a, 0x4a, + 0xaa, 0xcd, 0x7e, 0xe0, 0xed, 0xd4, 0x8a, 0x8b, 0xa6, 0x56, 0xf2, 0xfc, + 0x73, 0xae, 0x23, 0x03, 0x86, 0xf8, 0xfe, 0x9c, 0xb3, 0x33, 0x7d, 0x48, + 0x4e, 0x02, 0x6f, 0x03, 0xf8, 0xc4, 0xd2, 0xf3, 0xa4, 0x8f, 0x74, 0x92, + 0xe4, 0x8a, 0x56, 0x1c, 0x8a, 0xe8, 0x93, 0x0c, 0xe9, 0x2f, 0xaf, 0xe8, + 0xa0, 0x73, 0x8b, 0x94, 0xeb, 0x96, 0x4c, 0xad, 0x6c, 0x5c, 0x7f, 0xd9, + 0x7f, 0x71, 0x28, 0x25, 0xcf, 0x36, 0xb3, 0x47, 0x2a, 0x92, 0x90, 0x39, + 0x2f, 0x23, 0x7a, 0x5e, 0x0a, 0x6e, 0x6e, 0x40, 0xce, 0x35, 0xd3, 0xf2, + 0x5c, 0xd3, 0x4e, 0x57, 0x65, 0x93, 0x94, 0x53, 0x96, 0x9c, 0x6d, 0xa6, + 0x70, 0x46, 0xff, 0x9c, 0x6e, 0xdb, 0x56, 0x15, 0x6b, 0xab, 0xcd, 0x97, + 0xf8, 0xef, 0x5f, 0xac, 0xe9, 0x9c, 0x82, 0xa9, 0x80, 0xee, 0x70, 0x2d, + 0xcf, 0xa1, 0xd6, 0xaa, 0xb3, 0x04, 0x6b, 0xa5, 0x32, 0x9d, 0xc3, 0x5c, + 0x73, 0x34, 0xe4, 0xef, 0x16, 0x9c, 0x97, 0x4f, 0x4b, 0xaa, 0x9e, 0x01, + 0xde, 0xb0, 0xff, 0xcf, 0xc0, 0x37, 0x80, 0xf3, 0x5e, 0xab, 0x7e, 0xee, + 0xa2, 0xa4, 0x74, 0xd9, 0x99, 0x2e, 0x0b, 0x78, 0xdb, 0xec, 0xc4, 0x98, + 0xf4, 0xf9, 0xfe, 0x7e, 0x47, 0xac, 0xaa, 0xd3, 0x03, 0x98, 0x8c, 0x54, + 0x9d, 0x6e, 0xe0, 0x69, 0x13, 0xcb, 0xe6, 0xb9, 0xb8, 0xd7, 0x66, 0xcc, + 0xfb, 0x5d, 0x46, 0xde, 0xf7, 0xa7, 0x73, 0xd2, 0x1d, 0xcc, 0xed, 0x56, + 0x38, 0xa6, 0x26, 0x34, 0xac, 0xfb, 0x05, 0x69, 0x4e, 0x24, 0xf3, 0xec, + 0xf3, 0x99, 0x13, 0x77, 0xfe, 0xda, 0x90, 0x96, 0x34, 0x68, 0xb9, 0x26, + 0xec, 0x83, 0xff, 0x1e, 0xf8, 0xe0, 0x7c, 0x06, 0x63, 0xed, 0x3a, 0xe0, + 0x19, 0xae, 0x0a, 0xf7, 0xe8, 0x93, 0xa5, 0x94, 0xe8, 0x57, 0x9c, 0xde, + 0x70, 0x5d, 0x37, 0x68, 0x8d, 0xf4, 0xa0, 0x5f, 0xe6, 0x16, 0xc9, 0xeb, + 0x1a, 0x64, 0x83, 0xe7, 0x8d, 0x15, 0xad, 0xd0, 0x3c, 0x82, 0xbe, 0x29, + 0xd3, 0xb6, 0x7f, 0x6e, 0xce, 0x99, 0xd7, 0x8a, 0xa7, 0x4e, 0x6a, 0xa5, + 0x53, 0x2f, 0x68, 0x7b, 0x9b, 0x2f, 0x74, 0x49, 0x47, 0x16, 0xa7, 0x4e, + 0xc8, 0x93, 0x9e, 0x26, 0xa4, 0x73, 0x09, 0xbc, 0x2b, 0x58, 0x15, 0x31, + 0xed, 0x6e, 0x6d, 0x1f, 0xf0, 0xb4, 0xd9, 0x7f, 0xd2, 0x29, 0xdd, 0x86, + 0x6c, 0xb2, 0xa3, 0xb5, 0x29, 0xf9, 0x33, 0xd0, 0x74, 0xc1, 0x49, 0x91, + 0x5f, 0x3d, 0x01, 0x4c, 0x44, 0x07, 0xf5, 0x8a, 0x3a, 0xa5, 0x17, 0x4a, + 0xc7, 0xff, 0xbc, 0xaf, 0x3a, 0xb2, 0x85, 0x6b, 0xa0, 0xff, 0xd6, 0xfd, + 0xd3, 0xb6, 0xdb, 0x6b, 0x4a, 0xc5, 0xd2, 0x25, 0x6b, 0x15, 0xe5, 0x3a, + 0x99, 0x73, 0x44, 0x8a, 0x35, 0xec, 0x69, 0x9b, 0xe0, 0x8d, 0x0d, 0xde, + 0xec, 0x3c, 0x32, 0xa8, 0xff, 0x96, 0x64, 0xfa, 0x2b, 0x9a, 0x19, 0xf2, + 0x71, 0x49, 0x6e, 0x51, 0xf0, 0x7a, 0xde, 0x81, 0x7e, 0x76, 0xb0, 0x8f, + 0x7d, 0x13, 0x6a, 0x5f, 0x23, 0x6f, 0xa7, 0x97, 0x45, 0x34, 0x3d, 0xbf, + 0x1b, 0xf8, 0xa8, 0xb7, 0x5c, 0xf7, 0x04, 0x68, 0x24, 0xed, 0xec, 0xdb, + 0x80, 0x49, 0x88, 0xeb, 0x74, 0xb5, 0xd0, 0x49, 0x79, 0x93, 0xd7, 0xe4, + 0x9d, 0x3a, 0xa7, 0xb6, 0x76, 0xce, 0x5f, 0xf9, 0x9b, 0x46, 0x4d, 0xf9, + 0xa1, 0x3a, 0x2f, 0x6d, 0x8c, 0xeb, 0x52, 0xa1, 0x4e, 0x24, 0xa0, 0x47, + 0xa2, 0x95, 0x1d, 0x6b, 0x15, 0x57, 0x59, 0x44, 0x37, 0xf2, 0x9d, 0x52, + 0x54, 0xf4, 0x8d, 0x61, 0x2f, 0xda, 0x1e, 0x6c, 0xc8, 0xe6, 0x59, 0x38, + 0x97, 0x87, 0x8d, 0x67, 0xd9, 0x97, 0xf2, 0x02, 0xed, 0x9d, 0xb4, 0x9d, + 0xcf, 0xaa, 0x7f, 0x8e, 0x45, 0x5d, 0x3c, 0xd6, 0x03, 0xda, 0x38, 0x86, + 0x1d, 0xda, 0x78, 0x3f, 0xa2, 0x89, 0x3b, 0x36, 0x08, 0xfe, 0x70, 0x9d, + 0x9d, 0x81, 0x9c, 0x0b, 0x2e, 0xf6, 0x74, 0x9d, 0xdf, 0x50, 0x3c, 0xe8, + 0xc5, 0x79, 0x06, 0xe7, 0xc9, 0xaf, 0x0e, 0xe8, 0xb6, 0x26, 0x65, 0x27, + 0x9b, 0xa1, 0xdc, 0x03, 0xda, 0x75, 0xd9, 0x74, 0x63, 0x2b, 0xed, 0x91, + 0xac, 0xa8, 0x87, 0xa6, 0x24, 0x47, 0xb9, 0x96, 0xeb, 0xb8, 0x3e, 0x3b, + 0x26, 0xfa, 0xaf, 0x7c, 0x6b, 0xdd, 0x59, 0x6d, 0xd9, 0x31, 0x0f, 0x1a, + 0x02, 0xde, 0x82, 0x27, 0x9f, 0xb6, 0x96, 0x7c, 0xdd, 0xc8, 0x3f, 0xae, + 0x6d, 0x5d, 0x07, 0x9d, 0xe8, 0x27, 0x0d, 0x27, 0x3a, 0x03, 0x5b, 0x8b, + 0x68, 0x8a, 0x64, 0xa3, 0x85, 0x38, 0x3e, 0xe9, 0x1c, 0x5c, 0x0f, 0x1f, + 0xe0, 0xc1, 0x07, 0xc0, 0xaf, 0x3d, 0xeb, 0xc1, 0xfe, 0x3d, 0xfa, 0x8c, + 0x8c, 0xbc, 0x38, 0x04, 0x1f, 0xb7, 0xe6, 0x63, 0xd0, 0xc6, 0xd1, 0xd7, + 0xc5, 0x80, 0x8f, 0x99, 0xad, 0xeb, 0xb0, 0x59, 0xf0, 0x78, 0x85, 0x73, + 0xb0, 0xed, 0x95, 0x12, 0x9e, 0xb6, 0x54, 0x1b, 0xd4, 0xab, 0xc8, 0x97, + 0xd2, 0xe7, 0xa4, 0xe1, 0x5f, 0xe8, 0x77, 0xe8, 0x57, 0xb8, 0xd6, 0xf7, + 0x4b, 0x0e, 0x61, 0x7d, 0x99, 0x70, 0x68, 0x43, 0x9d, 0xa2, 0x27, 0x2b, + 0xda, 0xc1, 0x21, 0xd8, 0xd6, 0xf5, 0x6d, 0xa0, 0x95, 0x36, 0x76, 0x8d, + 0x48, 0x3b, 0xf7, 0xfb, 0x69, 0x57, 0xf0, 0xef, 0xee, 0x36, 0x61, 0x0d, + 0x9f, 0xef, 0x86, 0x63, 0x2d, 0xf4, 0x2d, 0x7c, 0x9f, 0xcd, 0x14, 0xa4, + 0x3f, 0x1c, 0xb3, 0xbf, 0x4a, 0xaf, 0xa3, 0xdf, 0x98, 0x90, 0x1d, 0x27, + 0x03, 0x9f, 0xb8, 0x63, 0xc9, 0x12, 0xfb, 0x64, 0x40, 0xe3, 0x8e, 0x33, + 0x91, 0x6f, 0x7c, 0x1f, 0xf0, 0xa0, 0xcf, 0x5b, 0x8d, 0x03, 0x68, 0x3f, + 0xd3, 0x60, 0x2a, 0x98, 0xdb, 0xc8, 0x0b, 0xfa, 0x63, 0xda, 0x9b, 0xd5, + 0x6a, 0x6f, 0x7b, 0x60, 0x6f, 0x4e, 0xbb, 0x64, 0x9d, 0xbf, 0x87, 0xbd, + 0x7d, 0xc3, 0xd1, 0xc0, 0x1b, 0x91, 0x8b, 0xb5, 0x34, 0x6c, 0xdd, 0x4c, + 0xbf, 0x26, 0x3b, 0x33, 0xb3, 0xa2, 0xc9, 0x09, 0xce, 0x35, 0x30, 0xa7, + 0x7c, 0x71, 0xe0, 0x0b, 0x2e, 0x1b, 0x4f, 0x81, 0x2e, 0xdf, 0x9f, 0x05, + 0xce, 0xf2, 0x88, 0x11, 0xda, 0x56, 0x34, 0x6f, 0xdd, 0xef, 0xda, 0xee, + 0xaf, 0x19, 0x52, 0x19, 0x6e, 0x93, 0xec, 0xf0, 0x12, 0x70, 0x4f, 0x3b, + 0x81, 0x1d, 0x53, 0xd7, 0x97, 0x81, 0x7f, 0xce, 0x1b, 0x82, 0x1e, 0xd3, + 0x0e, 0x40, 0x17, 0xf0, 0x2f, 0x03, 0xff, 0x5c, 0xb3, 0x4d, 0xbe, 0x6e, + 0x46, 0xb1, 0x32, 0x3a, 0x4f, 0x37, 0x96, 0x45, 0xfb, 0x1e, 0x96, 0x2f, + 0x7a, 0x49, 0xcd, 0x3d, 0x46, 0xff, 0x5a, 0x1d, 0x86, 0x9d, 0x68, 0x55, + 0x87, 0x7b, 0x1b, 0xb2, 0xbc, 0xba, 0x46, 0x0a, 0xd5, 0xc0, 0x06, 0x0b, + 0xee, 0x50, 0x25, 0x6d, 0x28, 0x5f, 0x22, 0xb2, 0x0f, 0xb6, 0xb7, 0x6c, + 0x73, 0xcc, 0xf9, 0x60, 0x6e, 0xbc, 0xd6, 0x0f, 0x9f, 0xc8, 0xf1, 0x7b, + 0xfe, 0xb4, 0x13, 0xcc, 0x7d, 0xa1, 0x76, 0x57, 0x37, 0xfd, 0x2e, 0xe2, + 0x44, 0xa6, 0xea, 0xfc, 0xbb, 0x0f, 0xfd, 0x5d, 0x07, 0xf3, 0xd1, 0x78, + 0xb2, 0xe3, 0x81, 0xce, 0x8a, 0xb6, 0xdf, 0xd6, 0xfb, 0xdb, 0x43, 0x1f, + 0xb6, 0x1f, 0x93, 0x7b, 0x6b, 0xd5, 0xbe, 0x76, 0x79, 0xcf, 0x60, 0x1c, + 0xbd, 0x22, 0x62, 0xba, 0xb5, 0x5d, 0xe0, 0x47, 0xb5, 0xb7, 0x65, 0x2e, + 0x51, 0xaa, 0xf9, 0x72, 0xc1, 0x09, 0x60, 0x30, 0xee, 0x2c, 0xd6, 0xf4, + 0xfe, 0x84, 0xac, 0x8e, 0x2d, 0xc2, 0xac, 0xc8, 0xae, 0xe1, 0x65, 0x51, + 0xb0, 0x7d, 0x89, 0x35, 0xd8, 0x54, 0xa9, 0x56, 0xed, 0x6d, 0x19, 0xa7, + 0x8b, 0xc0, 0xa5, 0xef, 0x59, 0x85, 0x1d, 0x58, 0x83, 0xdd, 0x2a, 0x99, + 0x5e, 0xc2, 0xeb, 0xfd, 0x9b, 0xd7, 0x70, 0x67, 0x42, 0x7a, 0xfa, 0x36, + 0xaf, 0xe1, 0xb0, 0x89, 0xb3, 0x65, 0x3c, 0x4c, 0x9c, 0x3b, 0xd6, 0x70, + 0x8e, 0xac, 0xa7, 0xe7, 0xb0, 0xc0, 0x07, 0x25, 0xda, 0xf3, 0xb2, 0xe7, + 0x62, 0x6d, 0x70, 0xe2, 0x8b, 0x82, 0x58, 0x37, 0xb2, 0x29, 0xf4, 0xc9, + 0xe6, 0x1e, 0x17, 0xbc, 0x32, 0x85, 0x3e, 0x4e, 0x93, 0x2a, 0xe4, 0x7c, + 0x7f, 0x43, 0xf6, 0x5c, 0x68, 0x98, 0xa1, 0x2e, 0x51, 0x27, 0xde, 0x86, + 0x8d, 0x75, 0x4e, 0x99, 0x88, 0xc3, 0xe7, 0x94, 0x8d, 0xc9, 0x44, 0xb5, + 0x26, 0x95, 0xed, 0xf9, 0x27, 0x7c, 0xe8, 0xe2, 0x94, 0x05, 0x3f, 0x5a, + 0x94, 0xce, 0x31, 0x37, 0x87, 0xf9, 0x06, 0x6d, 0x0b, 0x7e, 0x05, 0xb0, + 0xd0, 0xb5, 0x84, 0x31, 0xbf, 0xf3, 0x55, 0xd7, 0xe0, 0x3e, 0x19, 0xe4, + 0x4d, 0x89, 0x84, 0x3e, 0x7f, 0xd5, 0xa7, 0x9e, 0x4d, 0x8f, 0x5c, 0x45, + 0x9e, 0x62, 0xc1, 0x57, 0xc2, 0x7f, 0x40, 0xdf, 0x67, 0x9b, 0x82, 0xb8, + 0xfe, 0x40, 0x4f, 0x60, 0x63, 0x47, 0xb7, 0x06, 0x4f, 0x31, 0xe9, 0x9b, + 0xa7, 0x73, 0xcc, 0x01, 0xda, 0x13, 0x6e, 0x6e, 0x7c, 0x9b, 0x71, 0xe6, + 0xc0, 0x36, 0xfd, 0x4c, 0x65, 0x9b, 0x0e, 0x9f, 0x0e, 0x9b, 0xd2, 0xdd, + 0x1c, 0xfa, 0x67, 0x22, 0x1b, 0x4a, 0xc3, 0x86, 0xde, 0x56, 0x39, 0xc8, + 0xb9, 0xe6, 0x29, 0xd8, 0xab, 0xa2, 0x55, 0x26, 0x90, 0x13, 0xe8, 0xa3, + 0xef, 0x43, 0x4f, 0x70, 0x16, 0xf8, 0xc0, 0x02, 0xb8, 0xa4, 0x8f, 0xbe, + 0x11, 0xda, 0x33, 0xfb, 0xef, 0xf8, 0x41, 0x7c, 0xf8, 0x7c, 0xb8, 0xff, + 0x3f, 0x75, 0x07, 0x3e, 0x20, 0xc2, 0x45, 0x3c, 0xc3, 0xda, 0x04, 0xf2, + 0x99, 0x89, 0xa6, 0xa9, 0xd1, 0x9f, 0x17, 0x3d, 0xe6, 0x21, 0xcc, 0x41, + 0x1e, 0x0b, 0xfd, 0x22, 0x73, 0x8f, 0xce, 0x90, 0xa7, 0xb9, 0x28, 0xce, + 0x29, 0x7b, 0x43, 0xcc, 0xc9, 0x94, 0x9d, 0x36, 0xe5, 0x93, 0xa7, 0x73, + 0x9d, 0x58, 0x87, 0xb9, 0x26, 0xce, 0x0d, 0xbf, 0x84, 0x5c, 0x06, 0x6b, + 0xce, 0x63, 0x7d, 0x7b, 0x68, 0xf3, 0x17, 0xa5, 0x0c, 0x9f, 0x6a, 0xda, + 0x7c, 0x9f, 0xeb, 0x91, 0x0e, 0x8c, 0x1b, 0xd8, 0x0b, 0x7e, 0xc2, 0x50, + 0x7c, 0x46, 0x2c, 0x48, 0x5d, 0xc7, 0x1c, 0x09, 0x6b, 0x33, 0x58, 0x4b, + 0xbf, 0xcb, 0xb5, 0xcf, 0x82, 0x0e, 0x8c, 0x1b, 0x84, 0xa1, 0x8f, 0x12, + 0xdf, 0xcd, 0x6d, 0x86, 0x26, 0xf9, 0xe7, 0x0c, 0x3b, 0x5a, 0x1b, 0xe1, + 0xdd, 0xb8, 0x96, 0xf9, 0x09, 0x71, 0xf7, 0x84, 0xf1, 0x7f, 0x5c, 0x0a, + 0xcd, 0x02, 0x7e, 0x22, 0xd3, 0xc7, 0x90, 0x8f, 0xd9, 0x6d, 0x88, 0x55, + 0x9c, 0xdf, 0x6a, 0x05, 0x67, 0x8d, 0xe0, 0xee, 0xef, 0x5b, 0x3f, 0xfe, + 0x42, 0x72, 0xcd, 0x47, 0xd2, 0xc2, 0xa4, 0x80, 0x18, 0x01, 0x5e, 0x65, + 0xa6, 0x98, 0xc3, 0x15, 0x1b, 0x4a, 0xa6, 0x98, 0x1b, 0x83, 0x5f, 0x0c, + 0xf2, 0xa2, 0x73, 0xde, 0x46, 0xd9, 0x59, 0xe0, 0x77, 0x01, 0x3c, 0xce, + 0x40, 0x87, 0xc6, 0x01, 0x2b, 0x87, 0x81, 0x83, 0xf1, 0xd7, 0xd1, 0xf3, + 0x49, 0x29, 0x5b, 0xcc, 0x13, 0xda, 0x49, 0x67, 0x81, 0xf6, 0xaf, 0xe7, + 0x37, 0x63, 0x8e, 0xfd, 0x7b, 0x7b, 0x02, 0x99, 0x75, 0x71, 0x3c, 0xa1, + 0xe7, 0x7b, 0x36, 0xcc, 0x7f, 0xbf, 0x2b, 0xa0, 0x4d, 0x8d, 0x31, 0xff, + 0xf2, 0x86, 0xf1, 0xef, 0x25, 0xd7, 0x8f, 0xef, 0xda, 0x16, 0xea, 0x20, + 0xfa, 0x8f, 0x85, 0xf4, 0x82, 0xb6, 0x55, 0x5a, 0xa3, 0x9c, 0x57, 0x16, + 0x74, 0xe4, 0x7f, 0x6e, 0x6e, 0x27, 0x62, 0x7d, 0x46, 0x4a, 0x4d, 0xd0, + 0xbd, 0x1a, 0xcb, 0x56, 0xd7, 0x54, 0xd6, 0xd6, 0x04, 0xbe, 0xbe, 0xd4, + 0xf4, 0x91, 0x3b, 0xb5, 0xc6, 0xbd, 0x61, 0xf4, 0x2b, 0xd8, 0xa7, 0x20, + 0xd3, 0xde, 0x85, 0x82, 0x6e, 0x1f, 0x09, 0xf2, 0x3e, 0xfb, 0x9b, 0x5a, + 0x69, 0x99, 0xf9, 0x20, 0xec, 0xc9, 0x56, 0xf9, 0x3f, 0xe2, 0xca, 0x51, + 0xad, 0x70, 0xea, 0x38, 0xf2, 0xc1, 0x15, 0xfc, 0x4e, 0xe3, 0xd7, 0xc0, + 0x2f, 0xca, 0xc3, 0x9f, 0x41, 0x1e, 0xaf, 0x7c, 0x2c, 0xe2, 0x41, 0xb0, + 0xff, 0x1b, 0x2b, 0xd0, 0xb3, 0xe3, 0x29, 0xf9, 0x86, 0xad, 0xf7, 0xe9, + 0x81, 0x5f, 0x29, 0x20, 0x8f, 0xb5, 0xde, 0x96, 0xdf, 0x0e, 0xf3, 0x22, + 0x91, 0xd7, 0x16, 0xc0, 0xc7, 0x91, 0xfd, 0xa1, 0xce, 0x16, 0xee, 0x75, + 0x95, 0xff, 0x0c, 0xf3, 0x1e, 0xe4, 0x5f, 0x05, 0xb5, 0xea, 0x5b, 0xe0, + 0x8d, 0x26, 0x6f, 0x41, 0x87, 0x5e, 0x5b, 0xe8, 0x00, 0x3d, 0xb6, 0x94, + 0x27, 0x91, 0x2f, 0x68, 0x83, 0xd6, 0x26, 0xad, 0x03, 0x76, 0x0c, 0x1b, + 0x57, 0x63, 0x49, 0xb4, 0xe5, 0x2f, 0xcd, 0x2c, 0xd5, 0x74, 0xac, 0x45, + 0xee, 0x93, 0x43, 0x1f, 0xb2, 0xbf, 0xb2, 0x40, 0x38, 0x5d, 0x5e, 0x5f, + 0x30, 0xe4, 0x4d, 0xe4, 0x52, 0x6f, 0xd9, 0x97, 0x66, 0x10, 0xb7, 0xfa, + 0x11, 0x23, 0x50, 0x8b, 0xec, 0xa4, 0x9f, 0xde, 0x61, 0xe2, 0x59, 0xc2, + 0x6f, 0x1f, 0x72, 0xc1, 0x8f, 0x86, 0xf9, 0xb8, 0xf5, 0xa4, 0x2d, 0x01, + 0x18, 0xae, 0x37, 0x41, 0x5b, 0x37, 0xe4, 0x9f, 0xb5, 0xa6, 0xe4, 0xf5, + 0x1e, 0x95, 0xaf, 0x68, 0x9c, 0x0f, 0x7c, 0xd3, 0x87, 0xe7, 0xc9, 0x67, + 0x03, 0x3a, 0xce, 0x31, 0xdf, 0xd1, 0x87, 0x12, 0x5f, 0x76, 0xac, 0x80, + 0xc3, 0x5c, 0x59, 0x08, 0xfa, 0xd1, 0x9c, 0x68, 0x51, 0x1c, 0xa3, 0x6f, + 0x2c, 0xc1, 0x4e, 0x38, 0x9e, 0x10, 0x25, 0x83, 0x75, 0xf2, 0x94, 0x84, + 0x99, 0x3f, 0x3b, 0x33, 0x67, 0x53, 0xae, 0xf0, 0x71, 0xb5, 0x48, 0xae, + 0x94, 0x51, 0xbb, 0x54, 0x17, 0xbe, 0x09, 0xb9, 0xea, 0x61, 0xbe, 0x0f, + 0x1b, 0x3f, 0x4e, 0xf9, 0xa2, 0xfe, 0x5b, 0x40, 0xee, 0xb3, 0x20, 0xc9, + 0xa0, 0x5e, 0x39, 0x8a, 0x3c, 0x1f, 0xf2, 0xab, 0x1d, 0x07, 0x0e, 0xd8, + 0x69, 0x6d, 0x05, 0x4f, 0xd4, 0x16, 0xb5, 0xd3, 0x78, 0x0e, 0xe0, 0xd9, + 0xa0, 0x6e, 0x86, 0xb9, 0xc6, 0x87, 0xe8, 0x81, 0x3d, 0x95, 0x68, 0x4f, + 0xf2, 0xfd, 0x66, 0x5e, 0xbe, 0xdb, 0x1c, 0x93, 0xe7, 0x9b, 0x39, 0xf9, + 0xbb, 0xa6, 0x23, 0xdf, 0x69, 0x8e, 0xc8, 0xb7, 0x9b, 0xc3, 0xac, 0xc9, + 0x90, 0x37, 0x65, 0x98, 0x37, 0xc9, 0xbd, 0xde, 0xad, 0xb0, 0x77, 0xca, + 0xff, 0xd2, 0x4c, 0xa1, 0x31, 0x28, 0xe5, 0x63, 0xf0, 0xcf, 0xce, 0xcd, + 0xac, 0x25, 0xe5, 0x11, 0x87, 0x35, 0x41, 0x1b, 0xdf, 0xa3, 0xce, 0x84, + 0xff, 0x86, 0x3f, 0x9b, 0x4a, 0x65, 0x4f, 0xbb, 0x46, 0x47, 0xe8, 0x03, + 0x6e, 0x49, 0x4a, 0x07, 0xf6, 0x82, 0x0f, 0x5c, 0x7a, 0x1a, 0x36, 0xa0, + 0x6a, 0x9a, 0x04, 0xfc, 0x0d, 0x73, 0x01, 0x93, 0x76, 0x8c, 0x3a, 0x30, + 0x9b, 0x71, 0x0d, 0xd6, 0x77, 0xb4, 0x67, 0x03, 0x81, 0x83, 0x70, 0xfb, + 0x2c, 0xca, 0xcd, 0xb4, 0xe9, 0x57, 0x0b, 0xa1, 0x8f, 0x4b, 0x84, 0x7a, + 0x69, 0x61, 0xfe, 0xf1, 0xd0, 0x27, 0x6f, 0xdc, 0x07, 0xf1, 0x02, 0xf9, + 0x64, 0xb0, 0x8e, 0xb0, 0x5a, 0x08, 0xdb, 0x17, 0xce, 0x75, 0x82, 0xdf, + 0x8e, 0x94, 0xbd, 0x37, 0x35, 0xe6, 0xd9, 0xc8, 0x77, 0x30, 0x1e, 0xc1, + 0xf8, 0x4a, 0x38, 0xfe, 0x9c, 0x4c, 0x2f, 0x0a, 0x68, 0xfd, 0x89, 0x56, + 0x54, 0xe3, 0x31, 0x8c, 0x75, 0x8c, 0x0d, 0xd6, 0x02, 0x68, 0x37, 0x27, + 0xa9, 0xeb, 0xba, 0x4d, 0x5f, 0x38, 0x19, 0xfa, 0xc3, 0x82, 0x1c, 0xf6, + 0x06, 0x0b, 0x57, 0x11, 0x33, 0xb4, 0xb6, 0x28, 0xff, 0xd9, 0x0e, 0xbe, + 0xf8, 0xfe, 0xed, 0xac, 0xb9, 0x93, 0xa6, 0x7c, 0x7b, 0x3e, 0x6b, 0x3d, + 0xa4, 0x7f, 0x0d, 0x67, 0xf2, 0xfd, 0x83, 0x76, 0xf6, 0xc8, 0x94, 0xde, + 0x25, 0xdf, 0x3d, 0xca, 0xd8, 0x7b, 0x76, 0xe6, 0x07, 0xd0, 0xbd, 0xfa, + 0x4a, 0xbb, 0xd4, 0xeb, 0xa6, 0x5c, 0x19, 0x1d, 0x04, 0x9d, 0x96, 0xd4, + 0x1b, 0x49, 0xe4, 0x73, 0x9b, 0x65, 0xb6, 0x5f, 0x19, 0x18, 0xfc, 0xf4, + 0xb0, 0xf2, 0xd3, 0xae, 0x8d, 0x67, 0xe3, 0xe7, 0x3d, 0xeb, 0xcf, 0x5c, + 0x02, 0xfd, 0xd0, 0xeb, 0xe4, 0x76, 0x25, 0xe7, 0xb2, 0x37, 0x68, 0x95, + 0x75, 0xc4, 0x2e, 0x73, 0xd0, 0xba, 0x57, 0xff, 0x2f, 0xff, 0xf3, 0x26, + 0x65, 0xf7, 0xaa, 0xaa, 0x61, 0x54, 0xac, 0xc3, 0x7e, 0x4b, 0x2b, 0x2f, + 0x83, 0x16, 0xf8, 0xd8, 0xc6, 0xf6, 0x70, 0x9c, 0x51, 0xbc, 0x38, 0xdb, + 0xe8, 0x90, 0xef, 0xd4, 0xb7, 0xc8, 0x72, 0x9d, 0xef, 0xdb, 0x65, 0xa9, + 0x3e, 0x78, 0xb5, 0x4f, 0xef, 0x97, 0xf3, 0xd7, 0x5c, 0x6f, 0xdd, 0xa3, + 0x23, 0x37, 0x98, 0xfc, 0x40, 0x7e, 0x39, 0xda, 0x23, 0x3f, 0xfe, 0x72, + 0xf6, 0x99, 0x3f, 0xd5, 0x61, 0x03, 0xa3, 0x9d, 0xb4, 0x6d, 0xf4, 0x39, + 0x9f, 0xbd, 0x5a, 0xd0, 0xa9, 0xdb, 0x3f, 0x02, 0x4f, 0xb3, 0x0b, 0x81, + 0x1d, 0x10, 0x37, 0xf1, 0x42, 0x37, 0xec, 0xef, 0x01, 0x27, 0xde, 0x35, + 0x06, 0x81, 0xeb, 0x7b, 0x8a, 0x17, 0xb7, 0x3b, 0xd9, 0xab, 0x08, 0x49, + 0xfe, 0x15, 0x7b, 0x70, 0x78, 0x87, 0xbe, 0x5d, 0xea, 0xe9, 0xeb, 0xad, + 0xe7, 0xe0, 0xff, 0x0b, 0xa9, 0xec, 0x91, 0xcb, 0x72, 0x76, 0xe6, 0xa2, + 0x4d, 0xfd, 0xa7, 0xdf, 0x78, 0x09, 0xb9, 0xa7, 0x25, 0x0b, 0x0d, 0xfa, + 0x4b, 0xe2, 0x62, 0xfe, 0xbf, 0xcb, 0x3a, 0xac, 0x33, 0x4f, 0xc0, 0x3b, + 0xcc, 0x1b, 0xbf, 0x4e, 0x39, 0xb7, 0x11, 0x76, 0xb8, 0xa0, 0xff, 0x62, + 0x03, 0x8f, 0x06, 0xad, 0xbd, 0x3a, 0xf7, 0xfb, 0x37, 0xec, 0xfb, 0x0e, + 0x68, 0x1d, 0x04, 0x2c, 0x62, 0x66, 0xba, 0x75, 0x8f, 0x57, 0xd4, 0x1e, + 0xc7, 0x1a, 0xc8, 0xf5, 0x56, 0xf7, 0xc0, 0x5c, 0x43, 0xc7, 0x39, 0x4d, + 0x25, 0x97, 0x2b, 0xa3, 0xe4, 0xef, 0x9e, 0x5e, 0xe6, 0x99, 0x46, 0xfe, + 0xaf, 0xfd, 0xa8, 0x7e, 0x7c, 0x7e, 0x7e, 0x12, 0xfe, 0xd9, 0xf7, 0x2f, + 0xec, 0x1a, 0x04, 0x0d, 0xa8, 0x43, 0xd3, 0xe4, 0xf9, 0xd9, 0x19, 0x17, + 0x38, 0x8a, 0x0a, 0xf7, 0x25, 0x59, 0x01, 0xee, 0x09, 0xf2, 0x01, 0xb8, + 0xe7, 0x38, 0xaf, 0x64, 0x80, 0xf9, 0x46, 0x06, 0x78, 0x23, 0xfd, 0x4c, + 0x42, 0xd7, 0x76, 0x5b, 0xb7, 0x07, 0xba, 0x9e, 0x60, 0x6c, 0x7b, 0x0e, + 0xba, 0x57, 0x48, 0x52, 0x7f, 0xda, 0x7b, 0xd7, 0xf4, 0xa7, 0x15, 0x7f, + 0xbb, 0x94, 0x16, 0x12, 0xc0, 0x6b, 0xca, 0x5c, 0x8e, 0x78, 0x31, 0xae, + 0x53, 0xf7, 0x2b, 0xa1, 0xee, 0x77, 0x86, 0xb8, 0x17, 0xc1, 0x93, 0x6c, + 0xa6, 0xae, 0xb3, 0x8e, 0xda, 0xa6, 0x6a, 0x5b, 0x03, 0x36, 0x5d, 0xae, + 0xb1, 0x0e, 0xe5, 0xfd, 0xc8, 0xa5, 0x99, 0x69, 0xd4, 0xaa, 0xe5, 0xda, + 0x88, 0x56, 0x6e, 0xda, 0x5a, 0xd9, 0xa3, 0xbe, 0xed, 0xb2, 0x2e, 0x28, + 0x1e, 0xa7, 0x65, 0xa9, 0xf9, 0x4b, 0xbf, 0xba, 0x6b, 0x13, 0xfa, 0xd0, + 0xfd, 0x09, 0xca, 0xf7, 0xb3, 0xa4, 0x0b, 0x41, 0x9c, 0xfc, 0x4e, 0xc9, + 0xc9, 0x21, 0x14, 0xbd, 0xc8, 0xad, 0x4e, 0x0d, 0x11, 0x3f, 0xe8, 0x48, + 0xa5, 0x64, 0xd9, 0xe3, 0x1e, 0x67, 0x67, 0xc8, 0xcb, 0xf2, 0x71, 0x4b, + 0x0e, 0x2b, 0xf9, 0xbd, 0xac, 0x6c, 0xbb, 0xbc, 0x62, 0xc8, 0x74, 0x72, + 0xd0, 0x7a, 0x58, 0xb2, 0x57, 0x2f, 0x18, 0xd9, 0x67, 0xa6, 0x60, 0xd7, + 0x4b, 0x8b, 0x86, 0xb8, 0xaa, 0xde, 0xa2, 0x8c, 0xb2, 0x0b, 0xb0, 0xfc, + 0xf0, 0xec, 0x7b, 0x5b, 0xce, 0xde, 0x2d, 0x2b, 0x4f, 0xff, 0x26, 0x7c, + 0xce, 0x01, 0xc8, 0xc2, 0xcc, 0x1c, 0x42, 0x5e, 0xf1, 0xb4, 0x0c, 0x5a, + 0x55, 0xe4, 0xc9, 0xe0, 0x3b, 0xda, 0x01, 0x65, 0x03, 0x17, 0x74, 0x8c, + 0x07, 0xc8, 0x27, 0x8e, 0xaf, 0x95, 0x0b, 0xca, 0x96, 0xd2, 0xea, 0xdd, + 0x0e, 0xe0, 0x08, 0xde, 0x71, 0xfc, 0x19, 0xd9, 0xa1, 0xde, 0xdd, 0xa9, + 0xde, 0x55, 0xe9, 0x2b, 0x94, 0xfc, 0xbe, 0x82, 0x3d, 0xc9, 0xe3, 0x68, + 0xbe, 0x4b, 0x02, 0x5b, 0x8a, 0xf8, 0x6e, 0xc9, 0xc1, 0x46, 0x4a, 0xbe, + 0x84, 0xfa, 0xe7, 0x8e, 0xc6, 0x80, 0x94, 0x20, 0xc7, 0xe9, 0xdc, 0x83, + 0xbd, 0x3c, 0x5b, 0x71, 0x25, 0xfb, 0x8c, 0xe8, 0xa4, 0xf5, 0x4e, 0x39, + 0xe4, 0x45, 0xf4, 0x74, 0x86, 0xf4, 0x4d, 0x86, 0xe3, 0x44, 0x48, 0x43, + 0x2b, 0xbe, 0x4e, 0xe0, 0x42, 0xac, 0xcf, 0x79, 0x21, 0x1e, 0xfa, 0x11, + 0xd0, 0x3a, 0x99, 0x96, 0x15, 0x8f, 0x74, 0x6c, 0x91, 0x6a, 0x8a, 0xfd, + 0x03, 0xd0, 0x37, 0xe2, 0xd9, 0xc4, 0x7c, 0x66, 0x1d, 0x8f, 0x1f, 0x6c, + 0x54, 0xc0, 0x63, 0xf2, 0x97, 0xeb, 0x10, 0x23, 0x3e, 0x47, 0xf9, 0xed, + 0x46, 0x2e, 0x6f, 0x07, 0xba, 0x69, 0xad, 0xed, 0x59, 0x3a, 0xde, 0x0d, + 0x59, 0x71, 0xdf, 0x0e, 0x99, 0x84, 0xdd, 0x17, 0xeb, 0xdc, 0x7f, 0x12, + 0x7a, 0x74, 0x51, 0xed, 0x5f, 0x5a, 0xe9, 0x0f, 0xe1, 0x09, 0xdb, 0xbd, + 0x01, 0xb6, 0x5d, 0xf6, 0x2e, 0x58, 0x1f, 0x01, 0xff, 0xbb, 0x80, 0xd7, + 0xe5, 0x44, 0x8e, 0xf0, 0xc4, 0x83, 0x75, 0xf5, 0xd4, 0x27, 0xe0, 0x49, + 0xaa, 0xba, 0xbe, 0x58, 0x6f, 0x97, 0xe2, 0x42, 0x84, 0x8b, 0x78, 0x3e, + 0x40, 0xdd, 0x7b, 0xb7, 0xc2, 0x35, 0xad, 0x70, 0xe1, 0x7d, 0x9d, 0x3e, + 0xe7, 0x26, 0xc0, 0xa3, 0x76, 0xb7, 0x41, 0x5b, 0xb2, 0x4b, 0xaa, 0xaa, + 0x76, 0xef, 0x50, 0xbe, 0xa6, 0x9a, 0xdc, 0x8c, 0xf7, 0x3e, 0xf6, 0xdc, + 0x8d, 0x7c, 0xa6, 0x1b, 0x73, 0x99, 0x0d, 0x73, 0x1b, 0xe9, 0x4f, 0x6c, + 0xa0, 0xff, 0xbf, 0x7b, 0x19, 0x52, 0xe6, 0x72, 0xc1, 0xba, 0x12, 0xd6, + 0xcd, 0x1e, 0x87, 0x4d, 0x30, 0x4f, 0x4f, 0x31, 0x36, 0x5f, 0xa3, 0x68, + 0x99, 0x5d, 0xf9, 0x29, 0xd6, 0xf5, 0x03, 0x36, 0x1a, 0x07, 0x7c, 0x78, + 0x0a, 0x78, 0x8e, 0xd7, 0xd5, 0x1d, 0x05, 0x64, 0xf0, 0xbe, 0x3a, 0x7b, + 0xb5, 0xfe, 0x69, 0x3c, 0xbb, 0xa6, 0x85, 0x5f, 0xe4, 0x15, 0xe9, 0x25, + 0xad, 0xbc, 0x2f, 0x82, 0xbd, 0x39, 0xd0, 0xe3, 0xa4, 0x21, 0xa5, 0x1c, + 0xe2, 0xba, 0xc7, 0xbb, 0x57, 0xda, 0xe5, 0x40, 0x50, 0x23, 0xd8, 0x8c, + 0xef, 0xa6, 0x3a, 0xfb, 0xa1, 0x15, 0xde, 0xbf, 0x66, 0x78, 0x47, 0x37, + 0x8c, 0xda, 0x5b, 0x1e, 0x5a, 0xb1, 0xe5, 0x6b, 0x8d, 0x61, 0x79, 0xb8, + 0x91, 0xb5, 0xee, 0x81, 0x0f, 0x28, 0xaf, 0xde, 0xcb, 0x6e, 0x4b, 0xd2, + 0x7f, 0x99, 0xc8, 0x3d, 0xdb, 0xec, 0x20, 0x17, 0xa9, 0xb2, 0x36, 0x3b, + 0x9e, 0xe5, 0x7d, 0x8d, 0x55, 0x97, 0x8d, 0xf9, 0xca, 0xff, 0x65, 0xae, + 0xc2, 0xfd, 0xe9, 0xaf, 0x91, 0x9b, 0x78, 0xc8, 0x4d, 0x3c, 0xe4, 0x26, + 0x1e, 0x72, 0x13, 0x0f, 0xb9, 0x89, 0x87, 0xdc, 0xc4, 0x43, 0x6e, 0xe2, + 0x21, 0x37, 0x41, 0x1d, 0x10, 0xd4, 0x07, 0xe3, 0xc8, 0xb9, 0xe1, 0xbf, + 0xbc, 0x5b, 0xc2, 0xdc, 0x22, 0x8a, 0xcd, 0x9c, 0x3b, 0xbf, 0xc9, 0x0d, + 0xea, 0x2b, 0xe5, 0x13, 0x0a, 0xcd, 0x89, 0x30, 0x07, 0xe2, 0x9a, 0x28, + 0x76, 0x73, 0x9d, 0x8c, 0xb9, 0xa8, 0x3d, 0x0b, 0x93, 0xcc, 0x91, 0x82, + 0x98, 0x15, 0xe4, 0xe7, 0xaf, 0x22, 0x4f, 0xca, 0x20, 0x4f, 0x1a, 0x40, + 0x4e, 0xc4, 0x7b, 0xea, 0xe8, 0x2e, 0xa9, 0xa0, 0x1d, 0xf4, 0xc6, 0xb5, + 0x2f, 0x79, 0xcc, 0xdf, 0xed, 0x4c, 0x59, 0xd7, 0x8f, 0xf7, 0x89, 0x2f, + 0xc5, 0xd1, 0xaf, 0x23, 0x57, 0xfe, 0x4b, 0x75, 0x6f, 0x36, 0x31, 0x44, + 0x99, 0xdf, 0xf7, 0x31, 0xf9, 0x72, 0xc4, 0xdf, 0xe0, 0xbe, 0x4f, 0x5f, + 0x22, 0xff, 0x44, 0x7a, 0xcf, 0x80, 0xe1, 0x67, 0x12, 0x92, 0x3c, 0xb9, + 0x05, 0x73, 0x96, 0xf4, 0xa9, 0x3b, 0x23, 0x88, 0xf2, 0xcc, 0x7f, 0x40, + 0x5e, 0xb6, 0xe8, 0x67, 0x78, 0xb3, 0x40, 0xbc, 0xf4, 0xaf, 0xf5, 0x99, + 0x62, 0xbd, 0xae, 0x74, 0xea, 0x60, 0xa3, 0x84, 0x3c, 0xca, 0xe8, 0x93, + 0x0e, 0x13, 0xb5, 0x54, 0x84, 0x9b, 0x38, 0xdf, 0x4c, 0xaa, 0x1a, 0xe7, + 0xcc, 0xaa, 0x3c, 0x21, 0x6b, 0xee, 0x53, 0x9f, 0xa9, 0x2e, 0x64, 0xd3, + 0xac, 0x71, 0x0b, 0x56, 0x7d, 0xe6, 0x49, 0xe0, 0x58, 0x46, 0x6e, 0x60, + 0xa8, 0xbd, 0xeb, 0x33, 0xb3, 0x0b, 0xc1, 0xbd, 0x55, 0x40, 0x03, 0xe3, + 0x55, 0x87, 0x18, 0x4b, 0xc1, 0xfd, 0x95, 0xae, 0x60, 0x09, 0x47, 0x78, + 0x13, 0x70, 0x94, 0xdb, 0x30, 0x60, 0x29, 0x3b, 0xd2, 0x50, 0x9f, 0xa9, + 0xd4, 0x5b, 0x69, 0x20, 0x1e, 0xe2, 0x8d, 0xce, 0xc3, 0xb3, 0x24, 0x45, + 0x3f, 0xe9, 0xfb, 0xe5, 0xd1, 0x81, 0xb0, 0xae, 0x44, 0x1d, 0x79, 0xcc, + 0x0c, 0xf4, 0x5c, 0x8d, 0xff, 0x58, 0xc5, 0xa9, 0x8c, 0xce, 0x79, 0x3e, + 0xf1, 0x2e, 0xf7, 0x28, 0xe6, 0x30, 0x5e, 0x8e, 0xd6, 0xea, 0xe1, 0xda, + 0xae, 0x16, 0x7e, 0xb6, 0x85, 0xfb, 0x91, 0x26, 0x9e, 0xf3, 0x15, 0xec, + 0x45, 0xba, 0xb8, 0xc6, 0x04, 0x6d, 0x90, 0xa5, 0xf7, 0xbf, 0xe5, 0x7d, + 0xeb, 0x99, 0xc8, 0x53, 0x13, 0x30, 0x5c, 0x4f, 0x1c, 0x11, 0x0c, 0x5e, + 0x9c, 0x09, 0xe0, 0xf4, 0xd5, 0x7b, 0xbe, 0x4f, 0xda, 0xb7, 0x95, 0xd6, + 0x68, 0xff, 0x08, 0xcf, 0x70, 0x20, 0xb7, 0x55, 0x78, 0xf5, 0x7f, 0x7f, + 0xe1, 0x09, 0x5d, 0xfc, 0xd0, 0x7d, 0xe9, 0x70, 0x4b, 0x8d, 0x1c, 0xdd, + 0x3b, 0xb0, 0xfe, 0x67, 0x3d, 0xcf, 0xef, 0x03, 0xad, 0xf5, 0x69, 0x29, + 0x8c, 0x65, 0xdb, 0xa4, 0x60, 0xb2, 0x56, 0x19, 0x0f, 0xc7, 0x5b, 0x11, + 0xdb, 0x38, 0xbe, 0x15, 0xfc, 0x85, 0x2e, 0x3b, 0x1d, 0x61, 0xad, 0x94, + 0x0c, 0xbe, 0xeb, 0x0c, 0xd3, 0x8e, 0x58, 0x6b, 0x6e, 0x0e, 0xe7, 0x22, + 0x3b, 0xa2, 0x1f, 0x36, 0xc3, 0x39, 0xfa, 0x5b, 0x1d, 0xf5, 0x12, 0xfb, + 0xc0, 0xb3, 0xdc, 0x6a, 0x4b, 0xd1, 0x33, 0x29, 0xa7, 0x17, 0x23, 0xbf, + 0x05, 0x9f, 0x32, 0x64, 0x86, 0xbe, 0xbf, 0x13, 0xbe, 0xaf, 0x5b, 0xf6, + 0xc2, 0x67, 0xed, 0x83, 0xcf, 0xda, 0x8f, 0x1a, 0x75, 0x7c, 0xa5, 0xf5, + 0x3e, 0x97, 0x75, 0x71, 0x55, 0x0e, 0x29, 0xf9, 0x57, 0x7c, 0xc3, 0xfe, + 0x00, 0x3a, 0xb0, 0x53, 0xe5, 0x7b, 0x81, 0x4e, 0xc0, 0xdf, 0x3a, 0x49, + 0xe8, 0xc4, 0xc6, 0x7b, 0xe3, 0x61, 0xd8, 0x46, 0x47, 0x41, 0xc5, 0x86, + 0x95, 0x80, 0xf7, 0xd5, 0x7a, 0xc0, 0x7b, 0xf8, 0x65, 0xe0, 0x37, 0xa5, + 0xd2, 0xb0, 0xa4, 0x82, 0x7d, 0x2b, 0xd8, 0xb7, 0x82, 0xda, 0x72, 0xb6, + 0xd1, 0xfa, 0xed, 0xaa, 0x2b, 0xa4, 0x9d, 0xb0, 0x51, 0xdf, 0x6a, 0x39, + 0x7f, 0xf4, 0x3c, 0x02, 0xfe, 0x3f, 0x02, 0xfe, 0x1f, 0x46, 0x4d, 0xf5, + 0x00, 0x6a, 0xaa, 0xfb, 0x50, 0x53, 0x1d, 0x42, 0x4d, 0x35, 0x85, 0x9a, + 0xea, 0x6e, 0xf8, 0x8f, 0x3b, 0xe1, 0x3f, 0x26, 0xe1, 0x3f, 0x26, 0xd4, + 0x9d, 0xd1, 0x41, 0x6f, 0xe3, 0x1d, 0x4a, 0xb4, 0x17, 0xdb, 0x1b, 0x22, + 0x50, 0x81, 0xf2, 0xb1, 0x71, 0xa9, 0x37, 0x59, 0x5b, 0x39, 0xea, 0x3e, + 0x6c, 0xda, 0x99, 0xd4, 0xa6, 0x90, 0xbf, 0xdf, 0x33, 0xc2, 0x9a, 0x2b, + 0xa9, 0x15, 0x55, 0xcd, 0x95, 0x7d, 0xc1, 0x45, 0x8a, 0x84, 0xdc, 0x0f, + 0x67, 0xce, 0x9e, 0x2e, 0x1a, 0x51, 0xbd, 0xd3, 0xbb, 0x5a, 0xef, 0x2c, + 0xcf, 0xb3, 0xde, 0x79, 0x75, 0xb5, 0xde, 0x59, 0x9e, 0x67, 0xbd, 0xf3, + 0xca, 0xba, 0x7a, 0xe7, 0xca, 0xd3, 0x97, 0xd6, 0xd5, 0x3b, 0x57, 0x9e, + 0x7e, 0x29, 0x1c, 0x4b, 0xa8, 0x0f, 0x21, 0xad, 0x96, 0x83, 0x67, 0x4f, + 0x98, 0x73, 0x34, 0xfb, 0xd6, 0xff, 0xdf, 0x74, 0xca, 0x96, 0x35, 0xb1, + 0xff, 0x68, 0x6b, 0x50, 0x23, 0xb5, 0xce, 0x77, 0xb7, 0xcc, 0x5f, 0x56, + 0xdf, 0x4b, 0xcb, 0xb5, 0xcd, 0xef, 0xc2, 0x03, 0xcb, 0xca, 0x10, 0xf3, + 0xbc, 0x0f, 0x7c, 0x7e, 0xf3, 0x73, 0xf5, 0x0e, 0xf5, 0xcd, 0xcd, 0x55, + 0xf9, 0x36, 0xec, 0x7c, 0xf4, 0xd1, 0xad, 0x81, 0x2f, 0x60, 0x3f, 0xa5, + 0x05, 0xfe, 0xfd, 0x01, 0xe0, 0x01, 0xaf, 0x3d, 0x53, 0xdd, 0x07, 0x05, + 0xe7, 0x0d, 0xee, 0xc6, 0xcd, 0xfc, 0xe5, 0x19, 0xe6, 0xd6, 0x55, 0x85, + 0x9b, 0xf5, 0x23, 0x6b, 0xce, 0x28, 0x06, 0x44, 0xb8, 0x5e, 0x4d, 0x05, + 0x74, 0xbb, 0xa8, 0x1d, 0xb9, 0x26, 0x1a, 0xb7, 0xd6, 0x9a, 0x9d, 0xe1, + 0xbd, 0xdb, 0xe5, 0x20, 0xaf, 0x52, 0xf8, 0xcc, 0x10, 0xdf, 0xcf, 0xfd, + 0xc0, 0xf7, 0x10, 0xde, 0x6a, 0x81, 0x1f, 0x47, 0xae, 0xc7, 0x7b, 0x1a, + 0xe6, 0x6c, 0xa6, 0xbc, 0x33, 0xdf, 0x25, 0xff, 0x79, 0xd4, 0xf7, 0x27, + 0x9c, 0xec, 0xf0, 0x25, 0xd4, 0x1e, 0x27, 0x69, 0x27, 0xa3, 0xa4, 0x73, + 0x30, 0x33, 0x2b, 0xa9, 0x3e, 0xd2, 0x72, 0x5e, 0x3f, 0xac, 0x7d, 0x98, + 0x6e, 0x3d, 0xdc, 0xe7, 0x1f, 0x5b, 0xf6, 0xc9, 0xb4, 0xec, 0x53, 0xa0, + 0xcd, 0xd6, 0xef, 0xc0, 0x99, 0x2b, 0xdb, 0xaf, 0xb7, 0x52, 0x61, 0x5d, + 0xf6, 0xf0, 0xe8, 0x66, 0x59, 0xe8, 0xcf, 0x9e, 0x7d, 0x05, 0xf9, 0x7a, + 0x79, 0x14, 0x73, 0xa9, 0x41, 0xbc, 0xe3, 0x7c, 0xb6, 0x8e, 0x5c, 0xf4, + 0x6c, 0x5d, 0xb6, 0x01, 0x3e, 0x5b, 0x11, 0xe1, 0x3c, 0xfb, 0x8a, 0xb6, + 0x7a, 0xe8, 0x03, 0xd2, 0x17, 0x70, 0xe6, 0x29, 0xd4, 0x5f, 0x87, 0x83, + 0x7b, 0xb4, 0x70, 0x9f, 0x1b, 0xb5, 0x20, 0x6f, 0xce, 0x69, 0x95, 0xf0, + 0x0e, 0xf0, 0x2b, 0xf0, 0x17, 0x86, 0x4e, 0xd8, 0x77, 0x80, 0x5b, 0x93, + 0xa5, 0xa3, 0x86, 0xba, 0x3b, 0x2d, 0x8f, 0x52, 0xd6, 0x7c, 0x7e, 0x14, + 0xef, 0xa2, 0x33, 0xfd, 0x4d, 0x78, 0xa6, 0xd1, 0xb0, 0x6e, 0x8f, 0xce, + 0x94, 0x90, 0xd7, 0xe7, 0x2d, 0xc0, 0x8e, 0x80, 0x1f, 0x25, 0x59, 0x69, + 0x66, 0x3e, 0x05, 0x4f, 0xad, 0x85, 0x37, 0xe6, 0x06, 0x19, 0x46, 0x75, + 0x0f, 0x78, 0x30, 0x91, 0x86, 0x1d, 0xde, 0xd7, 0x17, 0xdd, 0xe9, 0x1a, + 0xb6, 0xae, 0x05, 0x75, 0x3c, 0xe7, 0x07, 0x60, 0x8b, 0x19, 0xd8, 0x27, + 0x73, 0xa6, 0x12, 0x6b, 0x15, 0xda, 0x93, 0xe5, 0x1a, 0x59, 0x6b, 0x52, + 0x86, 0x51, 0xef, 0xf0, 0xfc, 0x79, 0x59, 0x6e, 0x46, 0x34, 0xe4, 0x60, + 0x8f, 0x63, 0xf8, 0x8d, 0xe0, 0x9d, 0x83, 0x1f, 0x6b, 0xa5, 0x82, 0x7c, + 0x55, 0xe5, 0xe2, 0xc8, 0xb5, 0x87, 0x48, 0xdf, 0x01, 0xac, 0xa7, 0x3e, + 0x53, 0x4f, 0x0f, 0x88, 0xdb, 0x4f, 0x5f, 0x91, 0x06, 0x6e, 0xc0, 0x78, + 0xaf, 0xc1, 0xd6, 0x07, 0xf0, 0xcc, 0x5a, 0x65, 0xf2, 0x56, 0xe1, 0xf7, + 0x7d, 0x23, 0xc7, 0x6f, 0x11, 0xe3, 0xe1, 0x78, 0xd0, 0xfa, 0x1d, 0xea, + 0x5e, 0xfa, 0x5a, 0x39, 0xbb, 0x18, 0xc5, 0xc1, 0x19, 0xd8, 0x20, 0xef, + 0x68, 0xc7, 0xc1, 0x17, 0x8e, 0xb5, 0x30, 0x1e, 0x62, 0x7e, 0xf9, 0xaf, + 0x70, 0xee, 0xbc, 0x9c, 0x44, 0xfd, 0x2f, 0xfd, 0x7c, 0x66, 0x80, 0x7f, + 0x4b, 0xa8, 0xef, 0xeb, 0xe1, 0x0d, 0x9b, 0xfd, 0x71, 0xd0, 0x67, 0xb6, + 0xc0, 0x13, 0x26, 0xac, 0x4f, 0x04, 0xf1, 0x38, 0xed, 0xdf, 0xaa, 0xe7, + 0xef, 0x96, 0x3f, 0x50, 0x67, 0xca, 0xcb, 0xa1, 0x45, 0xdf, 0x77, 0x73, + 0x83, 0xc3, 0xcb, 0x92, 0x1d, 0x7e, 0x52, 0x76, 0x5b, 0x7b, 0x59, 0x8f, + 0x59, 0xc4, 0xe3, 0xdf, 0xda, 0x96, 0xf7, 0xfd, 0x13, 0xa0, 0xfd, 0x07, + 0x6a, 0x9f, 0xbb, 0x41, 0x3f, 0x78, 0xa5, 0x6a, 0x12, 0xd2, 0x0a, 0xde, + 0xa4, 0x48, 0x6f, 0xa7, 0x1c, 0x6a, 0x3e, 0x1f, 0xca, 0xe6, 0x11, 0x71, + 0xbd, 0xb7, 0x0d, 0xde, 0x6f, 0x97, 0x9b, 0x8f, 0x86, 0xb4, 0xe5, 0x41, + 0x2f, 0xf6, 0x6f, 0xfe, 0x43, 0x8a, 0xbe, 0x81, 0x32, 0x77, 0x91, 0x35, + 0xba, 0xa3, 0xcf, 0x40, 0x07, 0x3f, 0xce, 0x0f, 0x24, 0x65, 0xbd, 0x1f, + 0x20, 0x5c, 0xf2, 0x23, 0x74, 0x85, 0x74, 0x88, 0xf2, 0x9f, 0x2a, 0x6e, + 0x29, 0x7c, 0xc6, 0x06, 0x5f, 0xf0, 0xa4, 0x7a, 0x9e, 0x37, 0xe8, 0x9b, + 0x18, 0xff, 0xa8, 0xc3, 0xdd, 0xf0, 0x7f, 0xd0, 0x41, 0xd8, 0x71, 0x71, + 0x91, 0xf7, 0x13, 0x43, 0xea, 0x4e, 0xab, 0x04, 0xd9, 0x2e, 0xf1, 0x3b, + 0x63, 0x2a, 0xc8, 0x27, 0x83, 0xfa, 0x2b, 0x43, 0x5f, 0x88, 0xf6, 0xb8, + 0xf2, 0x93, 0x25, 0xf5, 0x5d, 0x31, 0x89, 0x35, 0x3e, 0x9e, 0xad, 0x7f, + 0x27, 0xf1, 0xa3, 0x42, 0xf0, 0x77, 0x12, 0xe1, 0x37, 0xde, 0x7a, 0x90, + 0x47, 0x3c, 0xd8, 0x30, 0x65, 0xaa, 0x11, 0xfd, 0xdd, 0x04, 0xe5, 0x60, + 0x4b, 0xb9, 0x11, 0xe5, 0x0e, 0x7e, 0x50, 0xd3, 0xac, 0x93, 0xe5, 0xe3, + 0x61, 0x4e, 0xc4, 0x1a, 0x80, 0x3c, 0xc4, 0x78, 0x39, 0x90, 0xdf, 0x92, + 0xbe, 0x03, 0xf2, 0x03, 0xcf, 0x3d, 0x13, 0xb6, 0x94, 0x0e, 0xe3, 0xba, + 0xc5, 0x1a, 0x33, 0xac, 0x7b, 0xb7, 0x4b, 0x75, 0x92, 0xef, 0x13, 0xf2, + 0xda, 0xfc, 0x40, 0x70, 0x4f, 0x24, 0x89, 0xf0, 0x3d, 0xc7, 0x49, 0x29, + 0xab, 0xf7, 0x77, 0x86, 0xf8, 0x50, 0xa7, 0xdd, 0x19, 0x8d, 0xd3, 0x90, + 0x63, 0x00, 0x37, 0x8d, 0x58, 0xf6, 0x55, 0xc4, 0xb1, 0x69, 0xf0, 0xbd, + 0x38, 0x51, 0x91, 0x6b, 0x6d, 0x4b, 0xc5, 0x7d, 0x37, 0x49, 0x1d, 0xa3, + 0x7e, 0x11, 0xa6, 0x07, 0xb9, 0x2a, 0xce, 0x3b, 0x2a, 0x53, 0x46, 0xfe, + 0xdd, 0xdb, 0xca, 0xb5, 0xac, 0x55, 0x90, 0xf7, 0x7d, 0xd7, 0xe4, 0xf8, + 0xfc, 0x6d, 0x0f, 0x06, 0x77, 0xfe, 0xba, 0x9e, 0xbf, 0x78, 0x5b, 0x39, + 0xe8, 0xe3, 0xcc, 0xef, 0x86, 0x7d, 0xc2, 0x19, 0xea, 0x7b, 0xec, 0x4f, + 0x6e, 0x32, 0xe5, 0xc2, 0x4d, 0xbe, 0x7f, 0x0f, 0xbf, 0x09, 0x85, 0x75, + 0xac, 0xa5, 0xea, 0xd8, 0x0e, 0x95, 0x8f, 0xb8, 0xa3, 0x19, 0xad, 0x04, + 0xdb, 0x3d, 0xe9, 0xa1, 0xe6, 0xd1, 0xb3, 0x63, 0xe7, 0x75, 0x0b, 0xf1, + 0x37, 0x9b, 0x39, 0x2e, 0xb9, 0x3e, 0x7e, 0x63, 0x9e, 0x73, 0xb8, 0x66, + 0x5b, 0x70, 0xef, 0x75, 0x83, 0xab, 0x7c, 0xae, 0x48, 0x18, 0x87, 0x6e, + 0x68, 0xb5, 0x8f, 0xd6, 0x3c, 0x93, 0x76, 0x21, 0x53, 0x26, 0xe8, 0xa9, + 0xd6, 0xa2, 0x9c, 0x8d, 0x7f, 0x0f, 0x70, 0xfe, 0xb6, 0xa7, 0x1a, 0x17, + 0x6f, 0x9b, 0x85, 0x7c, 0x78, 0xa6, 0xd9, 0x46, 0xa4, 0x7f, 0x51, 0xdd, + 0xc0, 0x3e, 0xe2, 0xbf, 0x87, 0xf8, 0xef, 0x21, 0xfe, 0x7b, 0x88, 0xff, + 0x1e, 0xe2, 0xbf, 0x87, 0xf8, 0x0f, 0x1e, 0x3e, 0x07, 0x7d, 0x79, 0xd6, + 0x9b, 0x08, 0x73, 0xb6, 0xc7, 0x56, 0x73, 0x36, 0xfe, 0xcd, 0xcb, 0xb9, + 0xa6, 0xa2, 0xa5, 0x52, 0x91, 0x20, 0xe7, 0x15, 0x9d, 0xf9, 0x4d, 0x94, + 0xf3, 0x7e, 0xf4, 0xf7, 0x90, 0x00, 0x8e, 0xf9, 0x1e, 0xe1, 0x2a, 0x9a, + 0x6e, 0x13, 0x2e, 0xc8, 0xf9, 0x58, 0x67, 0xad, 0x87, 0xe1, 0x77, 0x37, + 0xfa, 0xb6, 0xe0, 0x9b, 0x4f, 0xf0, 0x7d, 0xa9, 0x76, 0x87, 0x8b, 0x58, + 0x5c, 0x6e, 0xa8, 0x78, 0x8c, 0x71, 0xe3, 0x0e, 0xfe, 0xad, 0x02, 0x64, + 0xc0, 0x77, 0x5f, 0x66, 0x6d, 0x51, 0x6e, 0x20, 0x2f, 0x5a, 0x8e, 0x72, + 0x21, 0xc0, 0x79, 0x6f, 0x6a, 0xa5, 0x05, 0xca, 0x59, 0x97, 0xd9, 0x14, + 0x98, 0x62, 0xb7, 0xe6, 0x78, 0x97, 0x54, 0xbd, 0x74, 0xb6, 0x49, 0x7a, + 0x46, 0x40, 0x5b, 0x74, 0x8f, 0x2c, 0x62, 0xcc, 0xa7, 0x44, 0x9f, 0x47, + 0x7e, 0x6b, 0x0f, 0xa9, 0xbf, 0x6f, 0xe8, 0xc5, 0x3e, 0xfa, 0xfc, 0x8e, + 0x96, 0x7b, 0x5a, 0x29, 0x04, 0x3e, 0x9b, 0xb1, 0x87, 0xe7, 0x48, 0xc1, + 0x76, 0xdd, 0x6d, 0x38, 0x1b, 0xe4, 0xfa, 0xaf, 0x5b, 0x55, 0x0e, 0x0e, + 0x3f, 0x7a, 0x62, 0xa8, 0xbf, 0x5f, 0xba, 0xb7, 0xcb, 0xc9, 0x21, 0xd6, + 0x6b, 0x9b, 0x81, 0x8f, 0x6b, 0x79, 0xff, 0xb4, 0x5d, 0x4e, 0x2d, 0xc2, + 0xcf, 0x2e, 0x66, 0x1d, 0xea, 0xf2, 0xd2, 0x50, 0x0a, 0xfe, 0xf9, 0xe6, + 0x7e, 0xc6, 0xe7, 0xe5, 0x26, 0x75, 0xa5, 0x17, 0xf0, 0x03, 0xd0, 0xcb, + 0x4d, 0xb0, 0x27, 0x1d, 0xfb, 0x47, 0xb8, 0xff, 0x45, 0xe1, 0xee, 0xb5, + 0x9d, 0x6d, 0x4a, 0x37, 0xf4, 0xac, 0x95, 0xd1, 0x41, 0xfb, 0xff, 0x14, + 0x6e, 0x6d, 0x31, 0x71, 0x5c, 0x67, 0xf8, 0x3f, 0xb3, 0xdc, 0x8c, 0xd7, + 0x30, 0x86, 0xf5, 0xb2, 0x58, 0xae, 0xba, 0x03, 0x63, 0x33, 0xd1, 0x62, + 0x65, 0xb0, 0xec, 0x16, 0x55, 0x96, 0xba, 0xda, 0x05, 0x42, 0xe2, 0x3a, + 0xdd, 0x24, 0xb4, 0x72, 0xd5, 0x2a, 0x42, 0x60, 0x37, 0x8e, 0xfa, 0xd2, + 0x46, 0x55, 0xdb, 0x37, 0xaf, 0x16, 0xec, 0x38, 0xcd, 0xac, 0x17, 0x37, + 0x38, 0xf4, 0x71, 0xb3, 0x2c, 0x0e, 0x90, 0x75, 0x56, 0x6e, 0xf2, 0x90, + 0x3e, 0x19, 0x6d, 0xa2, 0x24, 0x55, 0xa5, 0xbc, 0x54, 0x7d, 0xab, 0x5a, + 0x0b, 0x27, 0xc4, 0x0f, 0xa9, 0xad, 0xf6, 0xa5, 0x77, 0x4d, 0xbf, 0xef, + 0xcc, 0x2c, 0xc6, 0xa4, 0x51, 0x91, 0x56, 0x73, 0xe6, 0xcc, 0xb9, 0x9f, + 0xff, 0xf2, 0xfd, 0x17, 0x3e, 0x67, 0x67, 0xba, 0xc2, 0xbd, 0xcd, 0x95, + 0x76, 0xc6, 0xfe, 0xb6, 0xd4, 0xcc, 0x02, 0xf3, 0x1a, 0x86, 0x64, 0xdc, + 0x64, 0xae, 0xcf, 0x96, 0x3a, 0x57, 0x66, 0x1b, 0x1b, 0x65, 0xda, 0xe4, + 0x4b, 0x6a, 0xa6, 0xdc, 0x23, 0x17, 0x41, 0xc7, 0x85, 0xe1, 0xd6, 0xd0, + 0xf7, 0xda, 0x19, 0xf2, 0x73, 0x77, 0x3c, 0xd4, 0x57, 0x1a, 0x57, 0x16, + 0x34, 0xb6, 0xee, 0xde, 0xf5, 0xed, 0x49, 0xac, 0x29, 0x41, 0x5f, 0x79, + 0x5c, 0xcb, 0x26, 0x83, 0xef, 0x7d, 0xbb, 0xde, 0xe3, 0xbb, 0xde, 0x0f, + 0xfc, 0x8f, 0xf6, 0x2c, 0xef, 0xa6, 0x07, 0xae, 0xd3, 0x1a, 0xe5, 0x2c, + 0x05, 0xcf, 0x36, 0x66, 0x3d, 0x2b, 0x4d, 0x5c, 0x90, 0x15, 0x5f, 0x65, + 0xdd, 0x36, 0xc8, 0xbb, 0x36, 0x99, 0x5f, 0x04, 0xcd, 0x63, 0x1f, 0xed, + 0x36, 0x63, 0xe4, 0x43, 0x71, 0xf2, 0x4c, 0x07, 0xae, 0xc1, 0xb0, 0x07, + 0x13, 0x68, 0xe7, 0x3f, 0xef, 0xa6, 0xcc, 0xb3, 0xda, 0x97, 0x43, 0x3c, + 0xe3, 0xab, 0x82, 0xce, 0xf7, 0x60, 0x9b, 0x16, 0xb9, 0x63, 0x67, 0x7a, + 0xc2, 0x7c, 0x20, 0xd8, 0xbe, 0x5f, 0x8d, 0x13, 0x6b, 0x3c, 0xe7, 0x6e, + 0xd7, 0x99, 0x9b, 0xc2, 0x1c, 0x2b, 0x10, 0xcd, 0x53, 0x22, 0xe5, 0xaa, + 0xc8, 0xeb, 0xf8, 0xfd, 0xa6, 0x1a, 0xc6, 0x4f, 0x14, 0xed, 0xee, 0x93, + 0xb2, 0x5e, 0xfa, 0x9a, 0xd4, 0xa0, 0x7f, 0xd6, 0x5c, 0xdf, 0xbf, 0xeb, + 0x26, 0xf5, 0x99, 0xbf, 0xe8, 0x29, 0x19, 0x18, 0xa1, 0x7e, 0x6b, 0x93, + 0x97, 0x17, 0x5b, 0x64, 0xc3, 0xb4, 0xcc, 0xbb, 0x44, 0x01, 0x5e, 0x42, + 0x26, 0x63, 0x11, 0x8d, 0x51, 0xe5, 0x5b, 0x22, 0x5b, 0xf8, 0xb6, 0xb5, + 0xf8, 0x4c, 0x9c, 0xfe, 0x97, 0x4f, 0x16, 0xf9, 0x6e, 0xe0, 0x69, 0x48, + 0xc3, 0x8e, 0x00, 0xcb, 0x42, 0x08, 0x99, 0x3c, 0x77, 0xee, 0xf7, 0xbb, + 0x5c, 0x1b, 0xea, 0x68, 0xcf, 0xb6, 0x49, 0xe1, 0x30, 0x64, 0xa2, 0x1a, + 0xd4, 0x39, 0x47, 0x8d, 0x98, 0x96, 0xd1, 0x91, 0x0a, 0x7d, 0xf8, 0xe6, + 0x5e, 0x2d, 0xaf, 0x33, 0x37, 0x7e, 0xa4, 0xf7, 0x82, 0x72, 0xbe, 0xe2, + 0x92, 0x56, 0x4d, 0x59, 0x03, 0xaf, 0xad, 0xd6, 0x5f, 0xed, 0xe3, 0x5d, + 0xad, 0xd7, 0x5f, 0x88, 0x07, 0xf6, 0x1a, 0xeb, 0x7e, 0x1c, 0x0f, 0xea, + 0x92, 0xa1, 0xfd, 0x45, 0x3b, 0xad, 0x8c, 0xbd, 0xbd, 0x20, 0xf5, 0xa5, + 0x9f, 0xc9, 0x3b, 0xa5, 0x9f, 0xc8, 0xaf, 0x97, 0xce, 0x00, 0x7f, 0x58, + 0xe5, 0x3c, 0xf4, 0xc9, 0xcd, 0xba, 0xef, 0xdf, 0x74, 0xa7, 0x60, 0x2b, + 0xf8, 0xfe, 0xef, 0xdc, 0x0d, 0x19, 0x38, 0xf6, 0x3d, 0xec, 0x39, 0x07, + 0x1e, 0xa2, 0x2c, 0x9c, 0x04, 0xbd, 0xb9, 0x7d, 0xd2, 0x19, 0xd5, 0x74, + 0x32, 0x78, 0xac, 0x15, 0x7b, 0x30, 0x42, 0x4c, 0xce, 0xbd, 0x8c, 0xf4, + 0x91, 0x66, 0x8c, 0x7a, 0x09, 0xf3, 0xb7, 0x82, 0x2f, 0xf6, 0xe2, 0xa7, + 0xe4, 0xee, 0x08, 0xd6, 0x3a, 0x42, 0xda, 0x6b, 0x95, 0x81, 0x47, 0xb1, + 0x8f, 0x5c, 0x8b, 0xdc, 0xf3, 0x7e, 0x19, 0xa7, 0x6f, 0xef, 0x9e, 0xc7, + 0xb2, 0xf1, 0x95, 0x2e, 0xf1, 0xa5, 0x05, 0xba, 0x7c, 0xfe, 0x78, 0x80, + 0x9b, 0xde, 0x55, 0x43, 0x68, 0x6f, 0xe7, 0xdf, 0x53, 0xc4, 0x79, 0x79, + 0xbf, 0x15, 0xb8, 0x7c, 0x1c, 0x78, 0x28, 0x53, 0xbf, 0x20, 0x8d, 0x91, + 0x28, 0xda, 0x10, 0xaf, 0x68, 0x59, 0x22, 0x59, 0x8f, 0x39, 0x5a, 0xcc, + 0x97, 0xc2, 0x1a, 0xa7, 0x74, 0x2e, 0x57, 0x1f, 0xcf, 0x9c, 0x58, 0x3e, + 0xa8, 0xb3, 0x41, 0x23, 0xac, 0x23, 0x7d, 0xa7, 0x35, 0xa6, 0x82, 0x0e, + 0xc5, 0x78, 0xc3, 0x92, 0xd1, 0xe5, 0x2e, 0x8c, 0x77, 0x41, 0x32, 0x6e, + 0x73, 0xcc, 0x51, 0xb4, 0xa1, 0x9c, 0x19, 0x05, 0x96, 0xf8, 0x58, 0x8d, + 0x2d, 0xc6, 0xa0, 0xcb, 0xe3, 0x32, 0x66, 0xee, 0xd9, 0xb1, 0xc7, 0xbc, + 0xb6, 0x15, 0x0c, 0x63, 0x38, 0x5c, 0x53, 0xd7, 0x8e, 0x35, 0xb1, 0x3f, + 0x7e, 0xb0, 0x93, 0x33, 0x8b, 0x0b, 0x90, 0x53, 0x0b, 0x1f, 0x66, 0xdc, + 0x67, 0x25, 0x1b, 0x6b, 0xd3, 0xb6, 0x4d, 0x05, 0xf7, 0x92, 0xf5, 0xe8, + 0xd3, 0xfa, 0x0e, 0xe4, 0xd0, 0x9e, 0xb0, 0x8e, 0x6d, 0xc5, 0xc8, 0xe0, + 0xec, 0x03, 0x1b, 0x97, 0x75, 0x5f, 0x96, 0xcc, 0x42, 0x4e, 0x26, 0x74, + 0x3f, 0x9e, 0xe1, 0x41, 0x8d, 0x43, 0xc8, 0xab, 0x03, 0xbd, 0x38, 0xcb, + 0xd4, 0x03, 0x7b, 0x38, 0xd9, 0x4b, 0x2e, 0xfa, 0x4f, 0xc8, 0xb3, 0xf8, + 0xd6, 0xcb, 0x3b, 0x6a, 0x93, 0x81, 0x67, 0xa0, 0x2f, 0xbd, 0x66, 0x7d, + 0x54, 0x3e, 0xf3, 0xfc, 0x38, 0x63, 0x2e, 0x7f, 0xf6, 0x4c, 0xf9, 0xc4, + 0xd3, 0xb1, 0xd8, 0xe9, 0x88, 0x58, 0xe7, 0x03, 0x5b, 0xfd, 0xf0, 0xf4, + 0xbc, 0xe2, 0xf7, 0xc3, 0xe7, 0x57, 0x54, 0x07, 0xda, 0x46, 0xd1, 0x8e, + 0xeb, 0x30, 0x65, 0xdc, 0xfb, 0xab, 0x3f, 0x73, 0xc4, 0xf7, 0x27, 0x74, + 0x4e, 0x58, 0xca, 0x9c, 0x57, 0x4d, 0x7c, 0xee, 0x88, 0x17, 0x6b, 0xc7, + 0x5c, 0x29, 0x73, 0x45, 0x1d, 0xc6, 0x7a, 0x58, 0xee, 0x25, 0x4f, 0x24, + 0x36, 0x84, 0xe3, 0x5b, 0x93, 0xcb, 0x2a, 0x95, 0x1c, 0x54, 0x56, 0xba, + 0x80, 0x5f, 0x8b, 0xd2, 0x71, 0xcc, 0x44, 0x52, 0x81, 0x77, 0xb1, 0x27, + 0xfb, 0xa8, 0xef, 0x4f, 0xda, 0xac, 0x4f, 0x99, 0x51, 0x45, 0xdf, 0x4b, + 0xa7, 0x8e, 0x77, 0x5e, 0x3e, 0x90, 0x32, 0x8f, 0xaa, 0xfd, 0xe1, 0xfb, + 0x28, 0x64, 0xe6, 0xf6, 0x78, 0x67, 0x96, 0x95, 0x29, 0x2f, 0x79, 0xa9, + 0xe4, 0xac, 0xb2, 0x72, 0x18, 0x33, 0x37, 0xa6, 0x28, 0x37, 0x52, 0x66, + 0xa7, 0xa2, 0x7f, 0xb4, 0x5d, 0xef, 0x7b, 0x12, 0xfd, 0x53, 0xaa, 0x25, + 0x5c, 0x0f, 0xef, 0xeb, 0x4a, 0x5f, 0xc0, 0x33, 0x94, 0x39, 0xfd, 0xc6, + 0xcc, 0x02, 0xf3, 0xcb, 0x74, 0x5e, 0x43, 0x7a, 0xe0, 0x18, 0xdf, 0x0d, + 0xb9, 0x7f, 0xe2, 0x6f, 0xa8, 0x43, 0xb9, 0xcc, 0x3a, 0x27, 0xe4, 0xb7, + 0x23, 0x1a, 0x3f, 0xdf, 0x3f, 0x91, 0xd7, 0xb9, 0x8b, 0x0d, 0x35, 0x10, + 0xee, 0x7b, 0xfb, 0xce, 0x92, 0x19, 0xf7, 0x4b, 0x1c, 0x67, 0x21, 0x72, + 0xb2, 0x5d, 0x98, 0x23, 0x3a, 0x5e, 0x6a, 0xd2, 0x06, 0x7d, 0x03, 0xcc, + 0x15, 0x68, 0xc6, 0xdd, 0x2f, 0x88, 0x71, 0xac, 0x63, 0x07, 0x9d, 0x00, + 0x77, 0x02, 0xaf, 0x56, 0x31, 0x4e, 0x61, 0x51, 0xf2, 0x41, 0x7f, 0xe9, + 0x60, 0x4e, 0x6a, 0xa1, 0xfa, 0x45, 0x63, 0x04, 0x3a, 0x70, 0x1c, 0xef, + 0xf7, 0x4f, 0x90, 0x3e, 0x79, 0x36, 0x49, 0x35, 0xbe, 0xc4, 0xf5, 0x1c, + 0x94, 0x89, 0x45, 0x60, 0x23, 0xfc, 0xe6, 0x17, 0x83, 0x7b, 0xbb, 0x0e, + 0x9c, 0x3d, 0xe1, 0x99, 0x9a, 0x5f, 0x67, 0x5d, 0xc6, 0x4f, 0xc0, 0x2b, + 0x3a, 0x8f, 0x8a, 0x7d, 0x99, 0x4b, 0x78, 0x88, 0xfa, 0xd1, 0x6d, 0x48, + 0x0c, 0x6d, 0x89, 0x59, 0x59, 0x6f, 0x8d, 0x26, 0x23, 0xdd, 0x32, 0x0f, + 0x79, 0x57, 0x81, 0xee, 0x2c, 0x5c, 0x89, 0xca, 0xac, 0xa7, 0xe3, 0xd9, + 0xc9, 0x8f, 0x95, 0x2b, 0xb5, 0xfa, 0x71, 0xb9, 0x51, 0x77, 0xf4, 0x37, + 0xea, 0xb5, 0xc2, 0xab, 0x86, 0x7c, 0xff, 0x88, 0xce, 0xa5, 0x73, 0x2a, + 0xd2, 0xd9, 0x4f, 0xcc, 0xb3, 0xa2, 0xf3, 0xea, 0x20, 0x3b, 0x80, 0x39, + 0xde, 0x06, 0xe6, 0x78, 0x0b, 0x98, 0xe3, 0x57, 0xc0, 0xd8, 0x37, 0x4b, + 0x93, 0xa1, 0xfc, 0x9f, 0x86, 0x1c, 0xa2, 0xae, 0xb6, 0xce, 0xe0, 0x4e, + 0xa7, 0xf3, 0xa0, 0xc1, 0xdb, 0xb0, 0x3f, 0xd6, 0x4b, 0x19, 0x59, 0x5d, + 0x9a, 0x90, 0xb5, 0xa5, 0x20, 0x0f, 0xf9, 0x03, 0xe6, 0x7d, 0x8d, 0xf0, + 0x9e, 0x1c, 0xc8, 0xa1, 0x3d, 0x32, 0x70, 0x94, 0xf2, 0xa3, 0x43, 0x96, + 0x8b, 0xab, 0x5a, 0x0e, 0x2d, 0x17, 0x59, 0x8e, 0x88, 0xce, 0x21, 0x9b, + 0xda, 0x90, 0x8a, 0x5b, 0x47, 0xfd, 0x3e, 0xed, 0x0f, 0x0a, 0xfc, 0xf3, + 0x94, 0x97, 0x7f, 0x0a, 0xef, 0x5e, 0xe9, 0xdc, 0xba, 0x19, 0xb3, 0x1b, + 0xed, 0x9a, 0xb2, 0x6b, 0x30, 0x88, 0xb9, 0xab, 0xdb, 0x68, 0x83, 0x39, + 0x80, 0x19, 0xaf, 0x43, 0x87, 0x34, 0x9c, 0x6e, 0x8d, 0xfd, 0x1a, 0xce, + 0x21, 0x9d, 0x77, 0xcb, 0x71, 0x0a, 0x45, 0x5b, 0xe6, 0x8a, 0x56, 0x32, + 0x0f, 0xfa, 0xbb, 0x01, 0xbb, 0x6d, 0x15, 0x77, 0xb0, 0x86, 0x33, 0x58, + 0xaf, 0x53, 0xcf, 0x6f, 0x6a, 0xd9, 0xbb, 0x5c, 0xff, 0x23, 0xc6, 0xb1, + 0xce, 0xa4, 0xe5, 0x0f, 0x7d, 0x94, 0x81, 0xf4, 0x4d, 0x65, 0x75, 0xff, + 0xa0, 0xdf, 0x2a, 0xda, 0xae, 0xd5, 0x29, 0x8f, 0x45, 0x2e, 0x79, 0x36, + 0x74, 0xc9, 0xcb, 0x09, 0x62, 0x80, 0xb2, 0x6a, 0xf6, 0xf3, 0xc3, 0x35, + 0xfb, 0xfe, 0x5e, 0x9b, 0xeb, 0x72, 0x42, 0xb9, 0x4d, 0xdd, 0xbf, 0xa1, + 0xb1, 0x8d, 0x57, 0x7a, 0x56, 0xde, 0xc4, 0x7d, 0x07, 0x18, 0x27, 0x27, + 0x6f, 0x00, 0xe3, 0xd5, 0x4b, 0xcd, 0xbc, 0xed, 0x93, 0x38, 0xa7, 0x92, + 0x9a, 0xbb, 0xda, 0x29, 0x97, 0xaf, 0x15, 0xd4, 0x4b, 0xd7, 0x3c, 0xf5, + 0xf3, 0xab, 0x45, 0x55, 0xb8, 0xea, 0xfb, 0xff, 0x70, 0x67, 0xe4, 0x9d, + 0x25, 0x5f, 0x4e, 0xbb, 0x46, 0x7f, 0x44, 0x9a, 0xf9, 0x74, 0xbe, 0xdf, + 0x01, 0xd9, 0xbc, 0x7e, 0xc0, 0xf7, 0x1f, 0x19, 0x19, 0x11, 0xe7, 0x00, + 0x31, 0xca, 0x70, 0x82, 0x39, 0xae, 0x94, 0x39, 0x19, 0xdb, 0x3e, 0x5f, + 0x51, 0x0a, 0xf2, 0xad, 0x3b, 0xc0, 0x2f, 0x8f, 0xee, 0x0b, 0xe3, 0x26, + 0x3f, 0x7c, 0x9e, 0x7e, 0xe5, 0xc4, 0xe7, 0xfc, 0xca, 0xa6, 0x9c, 0x2d, + 0xf6, 0xa2, 0x7f, 0x4c, 0x7e, 0x50, 0x8c, 0xee, 0x2a, 0x9b, 0x78, 0x3a, + 0x46, 0xa1, 0x78, 0xcf, 0x1f, 0xd4, 0xf1, 0x03, 0x60, 0x12, 0xd3, 0xf7, + 0x67, 0x5d, 0xce, 0xd7, 0x8d, 0xf9, 0x36, 0xcc, 0x7d, 0xd0, 0xff, 0xa7, + 0xb5, 0x7e, 0x2e, 0x2b, 0xd8, 0xc1, 0xe0, 0xef, 0x98, 0x8c, 0x15, 0xa1, + 0xe3, 0x15, 0xf3, 0x4c, 0x89, 0x15, 0xac, 0xc4, 0x2c, 0x64, 0xc7, 0x0c, + 0xe4, 0xcd, 0x29, 0x1d, 0x67, 0xed, 0xd5, 0xb2, 0x67, 0x8e, 0xe5, 0x9c, + 0xa4, 0x2b, 0x6e, 0x8f, 0x3e, 0xbf, 0xcd, 0x1b, 0x2f, 0x26, 0x82, 0x3b, + 0x07, 0x1f, 0xe7, 0x94, 0xb4, 0xc1, 0x1e, 0xca, 0xae, 0x4c, 0x81, 0x27, + 0x12, 0x38, 0xdb, 0x56, 0xcd, 0x0f, 0x0d, 0xe8, 0xef, 0x86, 0xf6, 0x29, + 0x06, 0xb1, 0x8b, 0x86, 0xc9, 0x76, 0xa7, 0xd0, 0xaf, 0x5d, 0x32, 0x57, + 0xdb, 0xb4, 0x5c, 0x7d, 0xb8, 0x2e, 0x0d, 0x1c, 0xf2, 0x04, 0xca, 0x11, + 0xd4, 0x25, 0xc3, 0xb2, 0x81, 0xf2, 0x34, 0xca, 0x2d, 0x78, 0xb2, 0xcd, + 0x61, 0xe0, 0x0a, 0x3c, 0x5f, 0xc3, 0x78, 0x23, 0x58, 0x73, 0xce, 0x94, + 0x8f, 0x4e, 0x50, 0x97, 0x38, 0x06, 0x73, 0x91, 0x67, 0x6d, 0x3c, 0x6b, + 0x45, 0x95, 0x5d, 0x60, 0x19, 0xcf, 0x72, 0xf0, 0xfd, 0x21, 0x99, 0x84, + 0x3e, 0x99, 0x6b, 0x81, 0x4c, 0xfa, 0x68, 0x5b, 0x26, 0xb1, 0xae, 0x5d, + 0xc6, 0xae, 0x92, 0xd7, 0x4d, 0xd0, 0x5b, 0xa7, 0x64, 0xaf, 0xc5, 0x34, + 0x1e, 0xad, 0x80, 0x16, 0xaf, 0x83, 0xae, 0x96, 0x41, 0x53, 0x99, 0xa2, + 0x35, 0x3a, 0xad, 0x92, 0xda, 0x2f, 0xf0, 0x38, 0xe8, 0xb5, 0xe3, 0x0a, + 0xb1, 0x28, 0x79, 0xd9, 0x01, 0xed, 0x89, 0xdf, 0x61, 0xdb, 0x93, 0x8e, + 0xb2, 0x41, 0x83, 0xa0, 0xcb, 0x62, 0xc0, 0xd3, 0xef, 0x29, 0x2d, 0x57, + 0x47, 0xef, 0x48, 0x2a, 0x7d, 0x47, 0x2c, 0xc8, 0x02, 0xcb, 0xfd, 0x50, + 0x5c, 0x8c, 0x79, 0x5c, 0x5e, 0xc7, 0x3c, 0x06, 0xf8, 0xfb, 0xc8, 0x90, + 0xe6, 0xef, 0x51, 0x89, 0xec, 0xe6, 0x71, 0xd0, 0x1b, 0x64, 0x50, 0xc0, + 0xd3, 0xe9, 0x90, 0x46, 0x9f, 0x06, 0xff, 0x5a, 0xb0, 0xca, 0x92, 0x32, + 0x0f, 0xfe, 0xbf, 0x8e, 0xef, 0xb7, 0xea, 0x9f, 0xaa, 0xb9, 0x05, 0x15, + 0xe6, 0xb2, 0x7c, 0x1b, 0x38, 0xf9, 0xf7, 0x38, 0xbb, 0x2e, 0x8d, 0xdd, + 0x07, 0x46, 0x18, 0x4b, 0xfb, 0xb7, 0xba, 0x6c, 0x1f, 0x95, 0xcd, 0xe1, + 0xe3, 0x28, 0xef, 0xc3, 0xd3, 0xc0, 0x39, 0x44, 0x75, 0x2c, 0x7c, 0xd9, + 0x1b, 0x36, 0x0a, 0x3a, 0xef, 0xe0, 0x98, 0xce, 0xcf, 0x37, 0xec, 0x03, + 0xf8, 0x4e, 0xbf, 0x0c, 0xf7, 0x06, 0xcc, 0xa4, 0x12, 0x3a, 0xc7, 0xb4, + 0x02, 0x2c, 0xb1, 0x82, 0xf1, 0xde, 0xa7, 0x5f, 0xaf, 0x06, 0x1e, 0x1e, + 0xfe, 0xa7, 0x9f, 0x8e, 0x31, 0x27, 0x7d, 0x33, 0x11, 0xe8, 0xbf, 0xcf, + 0xfc, 0x4d, 0x7b, 0x6e, 0xd4, 0xc0, 0xcb, 0x6d, 0x33, 0x86, 0xb6, 0xd0, + 0x65, 0xd0, 0x45, 0x65, 0x4d, 0xbf, 0x6c, 0x17, 0xf4, 0x2d, 0xd4, 0x52, + 0xe6, 0x07, 0x12, 0xf4, 0x9d, 0xb7, 0xa9, 0x77, 0xda, 0x21, 0x5f, 0x92, + 0x1a, 0x57, 0xbe, 0x6f, 0xe7, 0x21, 0x15, 0xac, 0xe4, 0x24, 0x68, 0xb4, + 0x4d, 0x2c, 0x67, 0x5c, 0x1e, 0xcc, 0x3b, 0xab, 0xfb, 0xb2, 0x6d, 0xb3, + 0x6f, 0x73, 0x5e, 0xae, 0x9f, 0x7b, 0xe1, 0x1e, 0xe8, 0xa7, 0x36, 0x35, + 0x8d, 0x36, 0x6a, 0xed, 0xfd, 0x01, 0x8d, 0x36, 0xf7, 0x11, 0xfb, 0x3f, + 0xfb, 0x20, 0x9d, 0x0c, 0x1b, 0x41, 0x0e, 0x06, 0x9e, 0x35, 0x9e, 0xe7, + 0xa7, 0xc0, 0xf7, 0x3b, 0xe9, 0xa7, 0xe9, 0x67, 0x0c, 0xe8, 0xe7, 0x91, + 0x6d, 0xfa, 0x21, 0xdd, 0x74, 0xca, 0xd8, 0x35, 0x5b, 0x26, 0x8a, 0xfa, + 0xbe, 0x81, 0x35, 0xe9, 0x3f, 0x3a, 0x0e, 0xba, 0x21, 0xad, 0x93, 0xb7, + 0x4c, 0x29, 0x83, 0x8e, 0xca, 0x90, 0x4f, 0x65, 0xd0, 0x14, 0x31, 0x50, + 0x19, 0xf2, 0xad, 0x5c, 0xb7, 0x9c, 0x2a, 0xf6, 0x4c, 0x9d, 0xbd, 0x02, + 0x3a, 0xba, 0x5e, 0xe7, 0xfd, 0xeb, 0x35, 0x9b, 0xd4, 0x83, 0xb7, 0xb6, + 0xef, 0xfe, 0xef, 0xb8, 0xfb, 0x43, 0x72, 0x03, 0x76, 0xcb, 0x9b, 0xa5, + 0x61, 0xc8, 0x24, 0x21, 0x5e, 0x04, 0x6d, 0x8c, 0xca, 0x6a, 0xe9, 0xa4, + 0xac, 0x41, 0x3f, 0xad, 0x2f, 0x0d, 0x00, 0x4f, 0x43, 0x8e, 0xbe, 0x72, + 0x44, 0xde, 0x58, 0x52, 0x32, 0x63, 0x43, 0xbf, 0x2c, 0xd3, 0x07, 0x0f, + 0x7a, 0x2e, 0x77, 0xea, 0x98, 0xfd, 0x58, 0x35, 0xf0, 0xc5, 0x8f, 0x57, + 0xbb, 0x64, 0xa2, 0x6a, 0xca, 0x63, 0xd5, 0x1e, 0x79, 0xa2, 0x1a, 0x93, + 0xd3, 0xb5, 0x84, 0x7c, 0xa3, 0x7a, 0x50, 0x4e, 0x55, 0x0f, 0xc9, 0x93, + 0xb5, 0xa4, 0x7c, 0x13, 0x76, 0x61, 0xae, 0xe6, 0xc8, 0x64, 0x6d, 0x58, + 0x1e, 0xaf, 0xd1, 0xc7, 0x8e, 0xf9, 0xf0, 0xcb, 0x6e, 0xfb, 0x2e, 0xb8, + 0xae, 0x0e, 0xac, 0xcb, 0x51, 0xe3, 0x3a, 0x66, 0x29, 0xb9, 0xc0, 0xff, + 0x21, 0x72, 0x0e, 0x7d, 0x2f, 0xbe, 0xa2, 0xa4, 0xa2, 0xe7, 0x6f, 0xfe, + 0xdf, 0x48, 0x54, 0xdb, 0x46, 0xe7, 0xca, 0x07, 0xd1, 0xc6, 0xa6, 0x4d, + 0x12, 0xfa, 0x41, 0x9a, 0xfe, 0xff, 0xa6, 0xed, 0x65, 0x68, 0x1f, 0xf6, + 0x2d, 0xda, 0x5e, 0xfa, 0xec, 0x29, 0x3f, 0x68, 0xe7, 0xd0, 0xd6, 0xda, + 0x19, 0xe7, 0x68, 0xce, 0x7b, 0x31, 0xf7, 0xf0, 0xff, 0xa7, 0x04, 0xf1, + 0xaa, 0xb3, 0xb5, 0x83, 0xfc, 0x3f, 0x15, 0xac, 0xe5, 0x8b, 0xf3, 0xc5, + 0x27, 0x4a, 0x63, 0xea, 0xb1, 0x12, 0x11, 0x8d, 0x2f, 0x17, 0xb7, 0x73, + 0xf2, 0xbe, 0x2e, 0xcb, 0x6e, 0x54, 0xaf, 0x21, 0xf0, 0xdb, 0xa7, 0x75, + 0x7e, 0xde, 0xd8, 0x10, 0xe9, 0x8f, 0x71, 0xb8, 0xae, 0x30, 0xb6, 0x00, + 0x6c, 0xeb, 0x9a, 0x72, 0xa9, 0x1a, 0xf8, 0xaf, 0xe6, 0x34, 0xbd, 0xbc, + 0x05, 0x9a, 0x63, 0xfc, 0x21, 0x78, 0xe6, 0xcb, 0x41, 0xdf, 0xec, 0x90, + 0x43, 0x7b, 0x1c, 0xfb, 0x35, 0x7a, 0x38, 0x17, 0xff, 0x4f, 0x07, 0xe5, + 0x70, 0xbd, 0xcc, 0x2f, 0xb6, 0x35, 0x2d, 0x06, 0x31, 0x5e, 0x47, 0x9e, + 0xc3, 0x5d, 0x54, 0x4c, 0xae, 0xbf, 0x43, 0x2a, 0x0e, 0x6d, 0x5b, 0xca, + 0xef, 0x21, 0x29, 0x63, 0x9e, 0x8a, 0xd3, 0xf4, 0x8d, 0x05, 0x72, 0xb6, + 0x62, 0x3e, 0x98, 0x77, 0xba, 0xbc, 0x1f, 0xef, 0xa8, 0x73, 0x80, 0x99, + 0xa6, 0xf8, 0x7e, 0x11, 0x65, 0xfa, 0x46, 0xe6, 0xf0, 0x4c, 0x84, 0x75, + 0xaf, 0xf5, 0x6b, 0xac, 0x7e, 0xf2, 0x41, 0xbf, 0x99, 0xb2, 0x95, 0xcf, + 0x44, 0xb6, 0x94, 0xf1, 0x8b, 0xf5, 0x7e, 0xca, 0xdc, 0xfd, 0x36, 0x7f, + 0x51, 0xf9, 0x8b, 0xa9, 0x7d, 0x0a, 0xe1, 0xb7, 0x3d, 0xf2, 0x94, 0xc9, + 0xdc, 0xf5, 0xb4, 0x1a, 0x2b, 0xfd, 0x34, 0xcc, 0xd3, 0xdd, 0x52, 0xfb, + 0x2b, 0x6f, 0xf7, 0x07, 0x79, 0xee, 0x1c, 0x7b, 0x67, 0x6e, 0xfb, 0x4e, + 0x3a, 0x61, 0x8e, 0x7b, 0x3b, 0x70, 0xab, 0x56, 0x62, 0xe0, 0x41, 0xc8, + 0x3b, 0xbb, 0x45, 0xf3, 0x63, 0xa1, 0xf6, 0x2f, 0x7f, 0x43, 0xf3, 0x73, + 0xd3, 0xc7, 0xf0, 0xdb, 0x7e, 0xda, 0xb6, 0x94, 0x1b, 0x97, 0x02, 0xbf, + 0x91, 0xb6, 0xa1, 0x21, 0x2b, 0x50, 0x47, 0x5e, 0x05, 0x9f, 0x6c, 0xb7, + 0xe5, 0xdf, 0x7f, 0x01, 0x99, 0xe7, 0xd3, 0x46, 0x40, 0x67, 0x00, 0x00, + 0x00 }; +static u32 bnx2_RXP_b09FwData[(0x0/4) + 1] = { 0x0 }; +static u32 bnx2_RXP_b09FwRodata[(0x278/4) + 1] = { + 0x08003fa4, 0x08003ea4, 0x08003f48, 0x08003f60, 0x08003f78, 0x08003f98, + 0x08003fa4, 0x08003fa4, 0x08003eac, 0x00000000, 0x080049d4, 0x08004a0c, + 0x08004c08, 0x08004c08, 0x08004c08, 0x08004c08, 0x08004a44, 0x08004c08, + 0x08004b50, 0x08004b88, 0x08004c08, 0x08004ad8, 0x08004c08, 0x08004c08, + 0x08004b88, 0x08004c08, 0x08004c08, 0x08004c08, 0x08004c08, 0x08004c08, + 0x08004c08, 0x08004c08, 0x08004c08, 0x08004c08, 0x08004c08, 0x08004bc8, + 0x08004c08, 0x08004bc8, 0x08004b50, 0x08004c08, 0x08004c08, 0x08004bc8, + 0x08004bc8, 0x08004c08, 0x08004c08, 0x08004c08, 0x08004c08, 0x08004c08, + 0x08004c08, 0x08004c08, 0x08004c08, 0x08004c08, 0x08004c08, 0x08004c08, + 0x08004c08, 0x08004c08, 0x08004c08, 0x08004c08, 0x08004c08, 0x08004c08, + 0x08004c08, 0x08004c08, 0x08004c08, 0x08004c08, 0x08004c08, 0x08004c08, + 0x08004c08, 0x08004c08, 0x08004c08, 0x08004c08, 0x08004c08, 0x08004c08, + 0x08004c08, 0x08004c08, 0x08004c08, 0x08004c08, 0x08004c08, 0x08004c08, + 0x08004c08, 0x08004c08, 0x08004c08, 0x08004c08, 0x08004c08, 0x08004c08, + 0x08004c08, 0x08004c08, 0x08004c08, 0x08004c08, 0x08004c08, 0x08004c08, + 0x08004c08, 0x08004c08, 0x08004c08, 0x08004c08, 0x08004c08, 0x08004c08, + 0x08004c08, 0x08004c08, 0x08004c08, 0x08004c08, 0x08004c08, 0x08004c08, + 0x08004c08, 0x08004c08, 0x08004c08, 0x08004c08, 0x08004c08, 0x08004c08, + 0x08004c08, 0x08004c08, 0x08004c08, 0x08004c08, 0x08004c08, 0x08004c08, + 0x08004c08, 0x08004c08, 0x08004c08, 0x08004c08, 0x08004c08, 0x08004c08, + 0x08004c08, 0x08004c08, 0x08004c08, 0x08004c08, 0x08004c08, 0x08004c08, + 0x08004c08, 0x08004c08, 0x08004c08, 0x08004c08, 0x08004c08, 0x08004c08, + 0x08004c08, 0x08004c08, 0x08004c08, 0x08004c08, 0x08004c08, 0x08004c08, + 0x08004ab4, 0x00000000, 0x0800602c, 0x08006044, 0x08006044, 0x08006044, + 0x0800602c, 0x08006044, 0x08006044, 0x08006044, 0x0800602c, 0x08006044, + 0x08006044, 0x08006044, 0x0800602c, 0x08006044, 0x08006044, 0x08006044, + 0x08006038, 0x00000000, 0x00000000 }; +static u32 bnx2_RXP_b09FwBss[(0x13dc/4) + 1] = { 0x0 }; +static u32 bnx2_RXP_b09FwSbss[(0x2c/4) + 1] = { 0x0 }; + +static struct fw_info bnx2_rxp_fw_09 = { + .ver_major = 0x1, + .ver_minor = 0x0, + .ver_fix = 0x0, + + .start_addr = 0x08003184, + + .text_addr = 0x08000000, + .text_len = 0x673c, + .text_index = 0x0, + .gz_text = bnx2_RXP_b09FwText, + .gz_text_len = sizeof(bnx2_RXP_b09FwText), + + .data_addr = 0x080069e0, + .data_len = 0x0, + .data_index = 0x0, + .data = bnx2_RXP_b09FwData, + + .sbss_addr = 0x080069e0, + .sbss_len = 0x2c, + .sbss_index = 0x0, + .sbss = bnx2_RXP_b09FwSbss, + + .bss_addr = 0x08006a10, + .bss_len = 0x13dc, + .bss_index = 0x0, + .bss = bnx2_RXP_b09FwBss, + + .rodata_addr = 0x08006740, + .rodata_len = 0x278, + .rodata_index = 0x0, + .rodata = bnx2_RXP_b09FwRodata, +}; + +static u8 bnx2_TPAT_b09FwText[] = { + 0x1f, 0x8b, 0x08, 0x08, 0xdb, 0xfd, 0x2f, 0x45, 0x00, 0x03, 0x74, 0x65, + 0x73, 0x74, 0x31, 0x2e, 0x62, 0x69, 0x6e, 0x00, 0xc5, 0x58, 0x5d, 0x6c, + 0x1c, 0x57, 0x15, 0x3e, 0xf3, 0xbb, 0x13, 0x77, 0xed, 0xbd, 0x49, 0x97, + 0x6a, 0x13, 0xb9, 0x74, 0xc6, 0x1e, 0x3b, 0x8b, 0x1c, 0x35, 0x93, 0xb0, + 0x24, 0x16, 0x5a, 0xd1, 0xc9, 0xcc, 0xae, 0x6b, 0xe5, 0x29, 0x86, 0xbc, + 0xf1, 0xb2, 0xac, 0xed, 0x46, 0x54, 0x48, 0x4d, 0x51, 0x84, 0x22, 0x81, + 0x94, 0x65, 0x76, 0x53, 0x40, 0x5a, 0x65, 0xc1, 0xa0, 0x04, 0x21, 0x84, + 0x22, 0x9b, 0x66, 0x91, 0x58, 0x3c, 0x4d, 0xe9, 0x6b, 0x94, 0xbc, 0x90, + 0x96, 0x17, 0x9e, 0x4b, 0x9e, 0xac, 0x02, 0x12, 0x0f, 0xa8, 0x8a, 0x78, + 0x40, 0x15, 0x0d, 0x1e, 0xbe, 0x33, 0x3f, 0x9b, 0x5d, 0xd7, 0x29, 0x79, + 0xa8, 0x84, 0xa5, 0xf1, 0xcc, 0xfd, 0x39, 0xf7, 0xe7, 0x7c, 0xdf, 0x77, + 0xee, 0xb9, 0x5b, 0x92, 0x69, 0x82, 0xd2, 0xbf, 0x49, 0x3c, 0x97, 0xbe, + 0x71, 0xf1, 0xd2, 0xe2, 0x8b, 0x27, 0x4d, 0x3a, 0x71, 0xe2, 0x45, 0xe9, + 0x19, 0x43, 0xa6, 0xcf, 0xe0, 0x4f, 0x21, 0x12, 0xd9, 0xf8, 0xfc, 0x90, + 0x21, 0x57, 0x6f, 0x4e, 0x7b, 0x36, 0x19, 0x4a, 0xd5, 0x79, 0x61, 0xd5, + 0x26, 0x72, 0x07, 0x0b, 0xa6, 0x4f, 0xff, 0x89, 0x5a, 0x45, 0x95, 0xb8, + 0xfe, 0xf9, 0xea, 0xa3, 0xe3, 0x77, 0x4e, 0x5b, 0x0f, 0x6f, 0x2a, 0x64, + 0x88, 0x6a, 0xc3, 0x10, 0xf3, 0x64, 0x4c, 0xc3, 0xe6, 0x97, 0x47, 0x57, + 0x34, 0x9a, 0xca, 0xc6, 0x12, 0x14, 0xf4, 0x0c, 0xaa, 0x77, 0x31, 0x8e, + 0x7d, 0x59, 0xf2, 0x43, 0x55, 0xf2, 0x6f, 0x18, 0x24, 0x57, 0x5d, 0xc9, + 0x0b, 0x6d, 0xb4, 0x49, 0xe4, 0x39, 0x39, 0x72, 0x45, 0x14, 0x7d, 0xd3, + 0x91, 0x49, 0xb6, 0x77, 0xa3, 0xd9, 0xb9, 0x25, 0xc9, 0xeb, 0x2f, 0x4b, + 0x7e, 0xdf, 0xe3, 0x7d, 0x63, 0x1d, 0x4b, 0x92, 0xdb, 0xe7, 0x77, 0xd5, + 0xf0, 0xbb, 0x53, 0xd4, 0x28, 0x52, 0x41, 0xb6, 0xd9, 0xd6, 0x24, 0xdf, + 0x59, 0x28, 0x29, 0x34, 0x8b, 0xe7, 0x00, 0xad, 0x3b, 0x94, 0xf7, 0x1c, + 0x52, 0x15, 0x5b, 0x26, 0xbf, 0x28, 0xd1, 0xaf, 0x2b, 0x1a, 0x9e, 0xb3, + 0x52, 0xad, 0xbf, 0x96, 0x8e, 0x53, 0xa4, 0x36, 0xd6, 0xd2, 0x2c, 0xf2, + 0xda, 0x12, 0x7b, 0xcf, 0x59, 0x10, 0x32, 0xcd, 0xe2, 0x99, 0xc4, 0x77, + 0x13, 0xfd, 0x34, 0xf2, 0x2a, 0x7b, 0xdb, 0x0e, 0xe0, 0x1b, 0xeb, 0xc4, + 0x58, 0x5e, 0xbc, 0x0e, 0x13, 0xeb, 0xb0, 0xa9, 0xd3, 0x5b, 0xc6, 0x3e, + 0xe6, 0x4a, 0x4d, 0xd2, 0xa9, 0x13, 0xaf, 0x7d, 0x92, 0x02, 0xa1, 0x50, + 0x70, 0x4c, 0x23, 0xf7, 0x9c, 0x8a, 0xf2, 0x21, 0x6a, 0x09, 0x09, 0x7d, + 0x3a, 0x29, 0x7e, 0x39, 0xb4, 0xeb, 0xa8, 0x2f, 0x50, 0x50, 0x3c, 0x28, + 0xc9, 0xd5, 0xef, 0xa1, 0x7e, 0x4e, 0x34, 0xe9, 0xbb, 0x78, 0x4b, 0x28, + 0x1f, 0xe4, 0xf1, 0x50, 0x96, 0x48, 0xb1, 0x49, 0x78, 0xa1, 0x49, 0xed, + 0x30, 0xb3, 0xe5, 0xfa, 0xa4, 0xae, 0x15, 0xee, 0xc5, 0x0e, 0xfd, 0x7a, + 0x75, 0x6a, 0x08, 0x6a, 0xa9, 0x55, 0xf4, 0xe9, 0xd9, 0xa2, 0x06, 0x9c, + 0xdc, 0x18, 0xcf, 0x97, 0xb8, 0x9e, 0xff, 0x50, 0x6f, 0x92, 0x52, 0xb5, + 0x85, 0x4f, 0x5f, 0xa6, 0xa4, 0x8d, 0xf7, 0x29, 0x63, 0x6f, 0xa7, 0xd2, + 0x72, 0x51, 0x78, 0x37, 0xbe, 0x48, 0x6e, 0xec, 0x1f, 0x03, 0xdf, 0x02, + 0x7b, 0xd4, 0x81, 0x75, 0xe0, 0xca, 0xd4, 0x2a, 0x19, 0x64, 0x2d, 0xae, + 0xa1, 0xe5, 0x6f, 0x5d, 0x05, 0x7e, 0x67, 0xdc, 0xd4, 0xd4, 0x8e, 0x71, + 0xfe, 0x23, 0xd6, 0xd9, 0x12, 0x06, 0xf0, 0x6e, 0x9c, 0x8f, 0xa2, 0x37, + 0x9d, 0x28, 0xd2, 0xab, 0x76, 0xf9, 0x16, 0x2d, 0x94, 0x34, 0x9a, 0x17, + 0x78, 0xc3, 0x8f, 0x36, 0x7c, 0xa5, 0x65, 0xeb, 0xc9, 0x78, 0x86, 0xbf, + 0xcb, 0x12, 0x96, 0x42, 0x1f, 0x74, 0xdf, 0x63, 0x7f, 0x94, 0x97, 0x62, + 0x9b, 0x28, 0xda, 0x5c, 0xfc, 0x34, 0x9b, 0xef, 0xa7, 0x36, 0x51, 0x54, + 0xaf, 0xf0, 0xbc, 0x16, 0xf6, 0xcc, 0x5c, 0x25, 0xaa, 0x0f, 0x1c, 0xa3, + 0xd9, 0xc5, 0xfa, 0x6c, 0xbc, 0x07, 0x25, 0xec, 0xc1, 0x2a, 0x9b, 0x92, + 0x41, 0x81, 0x1d, 0xbd, 0x00, 0x7e, 0xb8, 0xbe, 0x6d, 0xbd, 0xef, 0x2b, + 0x05, 0xda, 0x72, 0xf2, 0xd4, 0x09, 0x4b, 0x14, 0x84, 0x1d, 0xf2, 0x42, + 0x19, 0x73, 0x14, 0x68, 0xd3, 0x7e, 0x18, 0xd5, 0x1d, 0x07, 0x7e, 0x21, + 0xb6, 0x2b, 0xd5, 0x69, 0x1a, 0xed, 0x0b, 0x62, 0x8d, 0x1c, 0x60, 0x21, + 0xc3, 0x37, 0xb3, 0xf1, 0x77, 0x10, 0x3a, 0x68, 0xa7, 0x96, 0x5c, 0xb1, + 0x44, 0x40, 0x56, 0xc9, 0x53, 0x48, 0xc8, 0x55, 0x81, 0x3e, 0x2d, 0xaa, + 0x85, 0x06, 0xed, 0x28, 0x97, 0x63, 0x7e, 0xb7, 0x7b, 0x3b, 0xd1, 0x9d, + 0xa3, 0x25, 0xba, 0x1b, 0x16, 0xe9, 0x76, 0x48, 0x72, 0xd3, 0x01, 0x37, + 0x8a, 0x82, 0xde, 0x0a, 0x47, 0xf7, 0xf2, 0x1b, 0xec, 0x25, 0x38, 0xa2, + 0x40, 0x83, 0xab, 0xce, 0x3d, 0x30, 0xc8, 0x02, 0x46, 0x2d, 0xec, 0x3d, + 0x7b, 0xf3, 0xbe, 0x76, 0xa6, 0x57, 0x6d, 0xeb, 0x87, 0x3e, 0xa3, 0x76, + 0x4d, 0x43, 0xed, 0x5e, 0x7f, 0x0c, 0x30, 0x86, 0xa0, 0xab, 0xd0, 0x93, + 0x0c, 0xbf, 0xcc, 0x6c, 0x1b, 0xd4, 0xef, 0xe6, 0xc8, 0xdc, 0x54, 0xa9, + 0xd9, 0x2b, 0x92, 0x33, 0x6f, 0x99, 0x24, 0xcb, 0x45, 0x99, 0x54, 0x9a, + 0xd9, 0x8c, 0x68, 0x09, 0xeb, 0xb8, 0x6f, 0xff, 0x48, 0xa7, 0xa9, 0xc0, + 0xd1, 0x89, 0xfb, 0x18, 0x34, 0x73, 0xcb, 0x90, 0xfc, 0x1e, 0xef, 0x83, + 0x7d, 0x6e, 0xa4, 0x3e, 0x57, 0x25, 0xef, 0x46, 0x8e, 0x66, 0x37, 0xfe, + 0x11, 0x79, 0x36, 0x7c, 0x0d, 0x9e, 0xaf, 0x56, 0xbe, 0xa0, 0xd0, 0x04, + 0xea, 0x36, 0xb9, 0xed, 0x61, 0x5a, 0xcf, 0x63, 0x44, 0x91, 0xe7, 0x3c, + 0x4b, 0x1e, 0xf3, 0xff, 0x3c, 0xdb, 0xe4, 0x68, 0x66, 0x83, 0x75, 0x83, + 0xf7, 0x26, 0x97, 0x79, 0x6d, 0x07, 0xa8, 0x89, 0x1d, 0x35, 0xcb, 0x45, + 0xf8, 0x41, 0x8e, 0x35, 0xd2, 0xc4, 0x8e, 0x65, 0x7b, 0x02, 0x6f, 0x9e, + 0xef, 0xac, 0x92, 0xf0, 0x9d, 0xe3, 0x46, 0x9e, 0x7c, 0xe0, 0xab, 0x62, + 0x3d, 0x6b, 0x34, 0x57, 0x5a, 0x8f, 0xdb, 0x50, 0x37, 0xe0, 0x36, 0xb1, + 0xa7, 0x0d, 0xe5, 0x41, 0xb6, 0x06, 0x70, 0xda, 0x6e, 0x63, 0x16, 0x2d, + 0xde, 0x6b, 0xdd, 0xe1, 0xfe, 0xdc, 0xb7, 0x55, 0xd6, 0xc8, 0x2a, 0x6f, + 0x62, 0xf4, 0x7e, 0x17, 0xfb, 0xbd, 0xce, 0xb1, 0xc8, 0x36, 0xff, 0x4a, + 0xdc, 0x7f, 0x16, 0x7b, 0x9e, 0x5b, 0x6c, 0x73, 0xdb, 0x40, 0x23, 0x7b, + 0xa3, 0x25, 0x54, 0xf8, 0x5f, 0x86, 0xf3, 0xfd, 0x1f, 0xff, 0x2b, 0xd2, + 0xaa, 0xe0, 0x74, 0xa5, 0x00, 0x7c, 0x2c, 0xb3, 0x0d, 0xbd, 0xdb, 0x18, + 0x37, 0x70, 0x14, 0xd8, 0x25, 0x38, 0x71, 0xbf, 0xa5, 0x6e, 0x44, 0xed, + 0x78, 0xae, 0x2b, 0x3c, 0x17, 0x62, 0x92, 0xbd, 0xf8, 0x07, 0x70, 0xa3, + 0x49, 0x79, 0x9a, 0xdf, 0xce, 0xd3, 0x85, 0x41, 0x9e, 0x66, 0xae, 0xe9, + 0xf0, 0x43, 0x14, 0x75, 0x2a, 0xac, 0x51, 0xe0, 0x6d, 0x73, 0x3f, 0xab, + 0xa4, 0xc8, 0xbc, 0x0e, 0xb4, 0x6f, 0x13, 0xad, 0x0d, 0x74, 0xf8, 0x4d, + 0x1d, 0x19, 0x5b, 0xa6, 0x97, 0x7f, 0x46, 0xf4, 0xf2, 0x80, 0x6d, 0x79, + 0xfc, 0xc4, 0xa6, 0x89, 0x3d, 0xcb, 0xc0, 0xfc, 0xc2, 0x40, 0x46, 0xbc, + 0x40, 0x3c, 0xed, 0x7b, 0x88, 0x93, 0x35, 0x3c, 0x4b, 0x88, 0x9d, 0x8c, + 0x0d, 0xc7, 0x91, 0x5d, 0xe0, 0xb3, 0x8c, 0xb6, 0xb3, 0xa8, 0x4b, 0xf4, + 0xae, 0xd8, 0x3a, 0xd5, 0x9c, 0x49, 0x6a, 0x67, 0xb1, 0x4a, 0x70, 0xac, + 0x3a, 0x08, 0x4e, 0x1d, 0x40, 0xfc, 0xf9, 0x9d, 0x32, 0x1e, 0xab, 0x10, + 0xd3, 0x8a, 0x87, 0x11, 0x9b, 0xfa, 0xa8, 0xe7, 0xf1, 0x6e, 0xe1, 0x7d, + 0x00, 0xe5, 0xc3, 0xe8, 0x3b, 0x1a, 0xa7, 0x32, 0xbb, 0x27, 0xc5, 0x28, + 0xf0, 0x6e, 0xc3, 0x40, 0x7f, 0x13, 0xba, 0x61, 0x7f, 0xe7, 0x10, 0x3f, + 0xd8, 0xe7, 0x39, 0xf8, 0x54, 0xc7, 0xdc, 0x82, 0x66, 0xb7, 0xa9, 0xa5, + 0xa4, 0xf1, 0xcb, 0x1f, 0xc6, 0xaf, 0x52, 0xcc, 0x83, 0x20, 0x14, 0xb0, + 0x61, 0xfd, 0x66, 0x7a, 0x65, 0xec, 0xc8, 0xf5, 0xa0, 0x65, 0x4f, 0x89, + 0xa2, 0x55, 0xa7, 0x40, 0x4d, 0xe0, 0xee, 0x42, 0xc3, 0x4d, 0x68, 0xd8, + 0x1f, 0xd1, 0xb0, 0xff, 0x3f, 0x35, 0x0c, 0x7d, 0x42, 0x23, 0xb7, 0xc1, + 0xa9, 0xb7, 0x7a, 0xfb, 0xe9, 0x99, 0xb5, 0xcc, 0x9a, 0x36, 0xe9, 0xce, + 0xd1, 0xa7, 0xd5, 0x74, 0x49, 0x7e, 0x4a, 0x4d, 0xb7, 0x58, 0xd3, 0x2a, + 0x6b, 0xba, 0xb8, 0x57, 0xd3, 0xd3, 0x18, 0x23, 0xd1, 0xe6, 0x19, 0xb5, + 0x48, 0xda, 0x3c, 0xf0, 0xd8, 0xc8, 0x93, 0x72, 0xed, 0x31, 0xef, 0x98, + 0xcb, 0xfe, 0x00, 0xff, 0xb6, 0x35, 0xb4, 0x49, 0xe3, 0xf5, 0x88, 0x81, + 0x6a, 0xd5, 0x2a, 0xad, 0xc5, 0x7d, 0x54, 0xd2, 0xe1, 0xff, 0xd7, 0x8f, + 0x5a, 0xa6, 0x29, 0x8f, 0x6a, 0x1f, 0xea, 0xdf, 0x88, 0xae, 0x68, 0x55, + 0x9e, 0xa7, 0x65, 0x82, 0xf3, 0xe6, 0x4f, 0x80, 0x55, 0xbb, 0xcb, 0x7c, + 0xb7, 0x45, 0x3d, 0xe6, 0x19, 0xca, 0xd0, 0x84, 0x06, 0xde, 0xe6, 0xd0, + 0x4f, 0xdd, 0x48, 0x74, 0x74, 0x1b, 0xe3, 0x6e, 0x75, 0x99, 0x67, 0x06, + 0xe9, 0xd7, 0xed, 0xd2, 0x85, 0x38, 0x06, 0xcf, 0x8a, 0x25, 0x62, 0x0d, + 0xf2, 0xb9, 0x88, 0xf6, 0x41, 0x8e, 0x94, 0x58, 0xf7, 0x13, 0xa9, 0xee, + 0x9f, 0x87, 0xaf, 0x26, 0x50, 0x66, 0xed, 0x1f, 0x4e, 0xb5, 0x3f, 0x85, + 0x37, 0xd7, 0xad, 0xa8, 0x09, 0x87, 0xc0, 0xc7, 0x0d, 0xc6, 0x37, 0x8f, + 0x58, 0xc7, 0xf3, 0xff, 0x33, 0x5a, 0xb5, 0x19, 0x63, 0xdb, 0xfc, 0x01, + 0xcd, 0x41, 0x7f, 0xa8, 0xdf, 0xe6, 0xbe, 0x6c, 0x93, 0xf5, 0x15, 0x69, + 0xdf, 0x0f, 0xf7, 0xf4, 0x45, 0xfd, 0x36, 0xf7, 0x63, 0x7d, 0x1c, 0x22, + 0xe5, 0x3a, 0x9f, 0xdb, 0x1e, 0xeb, 0x03, 0x76, 0x35, 0xd4, 0x71, 0x6e, + 0xc1, 0xf6, 0x7c, 0x86, 0xf3, 0x3a, 0x39, 0xef, 0xe0, 0x73, 0x7e, 0xcf, + 0x79, 0x3e, 0xd4, 0xc8, 0x19, 0xf0, 0xfe, 0x3b, 0xea, 0x27, 0x35, 0xb2, + 0x02, 0x4d, 0x5c, 0x54, 0x13, 0x8d, 0xbc, 0x86, 0xf7, 0x19, 0x94, 0x57, + 0xf6, 0x68, 0x24, 0xb3, 0x7b, 0xf2, 0x39, 0x1e, 0xf4, 0x4a, 0xf1, 0x99, + 0xcb, 0xf3, 0x29, 0x1b, 0xd4, 0xd2, 0x52, 0x3d, 0xd4, 0x87, 0x7a, 0x98, + 0x40, 0xcc, 0xc8, 0xa5, 0x5c, 0xc7, 0xdb, 0xfe, 0x48, 0xf1, 0x1d, 0x4b, + 0xb4, 0x89, 0xb5, 0x31, 0x7a, 0x9e, 0xfd, 0xbf, 0xf4, 0x41, 0xe0, 0x51, + 0x3c, 0x37, 0x72, 0x11, 0x3e, 0x17, 0xa2, 0xe8, 0x15, 0x07, 0xed, 0x59, + 0x4e, 0x12, 0x63, 0x9f, 0xc3, 0xd9, 0xcb, 0x78, 0x20, 0x0f, 0xb4, 0x67, + 0xa1, 0x07, 0x8e, 0x05, 0xbb, 0xd1, 0x96, 0xed, 0xa1, 0xae, 0x06, 0xff, + 0x33, 0x26, 0xcb, 0xd2, 0x52, 0xdf, 0x60, 0x3b, 0xe8, 0x6d, 0xbf, 0x5c, + 0x4c, 0x87, 0xae, 0x1e, 0xe3, 0xc4, 0x3c, 0x6a, 0x8e, 0xe0, 0xd4, 0x88, + 0x71, 0xda, 0x19, 0xe2, 0xd4, 0x4c, 0x71, 0x6a, 0xc6, 0x38, 0x3d, 0x48, + 0x71, 0xfa, 0xf3, 0x13, 0x70, 0xda, 0x79, 0x0a, 0x9c, 0x0c, 0xda, 0xb2, + 0x4b, 0x38, 0x6f, 0xf5, 0x38, 0x77, 0xbd, 0xef, 0xec, 0x97, 0x7b, 0xb1, + 0xdf, 0xc7, 0xb0, 0x8a, 0x18, 0xab, 0x2d, 0x1a, 0xcd, 0x43, 0x2c, 0xf3, + 0x1e, 0x15, 0x70, 0x6e, 0xe4, 0xe9, 0xea, 0x9e, 0x5c, 0x24, 0x00, 0x4e, + 0xb5, 0x14, 0xa7, 0xab, 0xc0, 0xa9, 0x96, 0xe2, 0xb4, 0x3e, 0x82, 0xd3, + 0xfa, 0x18, 0x4e, 0x1c, 0x53, 0x2a, 0xc6, 0x7a, 0x37, 0xc3, 0x28, 0xc3, + 0x47, 0xa7, 0x9b, 0x62, 0x0a, 0xfb, 0x3f, 0x4e, 0xed, 0x9f, 0xaa, 0x9c, + 0xff, 0x02, 0xbb, 0x97, 0x54, 0x39, 0x3e, 0x17, 0xf8, 0xfb, 0x71, 0xbe, + 0x82, 0xb9, 0x5c, 0xcf, 0xe1, 0x3d, 0x21, 0xcf, 0xb5, 0x47, 0x63, 0xd1, + 0x07, 0x88, 0x45, 0x5c, 0xc7, 0xfd, 0x54, 0xa9, 0x06, 0xcd, 0x2b, 0xc8, + 0xe1, 0xfd, 0x61, 0x0e, 0x9f, 0xf8, 0xe1, 0x6a, 0x9a, 0xc3, 0x6f, 0xd9, + 0x9c, 0xc3, 0x9f, 0xd0, 0x68, 0x62, 0x39, 0xc5, 0x93, 0x79, 0x3d, 0x89, + 0xb6, 0xb3, 0x31, 0xee, 0x6d, 0xc4, 0xf2, 0x55, 0xf8, 0xa0, 0x19, 0xf3, + 0x13, 0x79, 0x57, 0xca, 0x5d, 0xe4, 0xbb, 0xe4, 0x87, 0x09, 0x4f, 0x3f, + 0xdb, 0x5c, 0xec, 0xef, 0x88, 0xd9, 0x46, 0x43, 0xc5, 0x1d, 0xe0, 0x6e, + 0x18, 0xc7, 0xea, 0x73, 0x41, 0x97, 0x5a, 0x47, 0xaa, 0x57, 0x22, 0xe0, + 0xee, 0x7e, 0xfd, 0x34, 0x9f, 0x39, 0xf9, 0x45, 0xaf, 0x82, 0xfa, 0x81, + 0x41, 0xc8, 0x83, 0x70, 0xa7, 0xa1, 0x96, 0x77, 0x5a, 0x42, 0xbe, 0x83, + 0x32, 0x6c, 0x82, 0x70, 0xba, 0x21, 0x57, 0x4b, 0xe0, 0x43, 0x8b, 0x5c, + 0xac, 0xd3, 0x0d, 0xe3, 0x7b, 0x4d, 0x43, 0xa9, 0x1a, 0xc8, 0x37, 0xc9, + 0xc0, 0x99, 0x0f, 0x9f, 0x98, 0x46, 0x7b, 0x80, 0x9c, 0x08, 0x79, 0x80, + 0xb7, 0x08, 0xbf, 0x1c, 0x03, 0x76, 0xa1, 0x0a, 0xdb, 0x6f, 0xe9, 0xc9, + 0x9d, 0x88, 0xc8, 0x8b, 0xfd, 0xf5, 0x71, 0xca, 0x91, 0x38, 0xe7, 0x92, + 0x6a, 0x3d, 0x32, 0x9b, 0x0e, 0xb8, 0x8e, 0x33, 0xa5, 0x13, 0x72, 0x5e, + 0x7d, 0xcc, 0x90, 0xaf, 0x71, 0x3c, 0x7f, 0x00, 0x1f, 0xe2, 0x7b, 0x9b, + 0xcf, 0x19, 0x85, 0x73, 0x73, 0xdc, 0x7d, 0xca, 0x88, 0x37, 0x34, 0x89, + 0xd8, 0x87, 0xd8, 0x3b, 0xcd, 0x58, 0xb9, 0xc9, 0x19, 0xc4, 0xe3, 0x1d, + 0x97, 0x93, 0x79, 0xfe, 0xa4, 0x25, 0x1c, 0xc6, 0x7d, 0x07, 0xfe, 0x5b, + 0xed, 0x39, 0x1c, 0x73, 0x3f, 0xaf, 0xd0, 0x43, 0x8a, 0x39, 0x29, 0x4e, + 0x20, 0x16, 0x9f, 0x86, 0x8d, 0x1b, 0xeb, 0x31, 0xc9, 0xbd, 0x32, 0x9b, + 0x0f, 0xf7, 0x8c, 0xf1, 0x17, 0x65, 0xbc, 0xec, 0x82, 0xd3, 0x95, 0x74, + 0xbe, 0x51, 0x8e, 0x2c, 0x20, 0xe5, 0x79, 0xa0, 0x0d, 0xf3, 0xb7, 0xa2, + 0x8e, 0x7e, 0xbc, 0x46, 0xd6, 0x25, 0xdb, 0x1c, 0xd1, 0xc6, 0xc7, 0x99, + 0xdd, 0x67, 0x8c, 0xea, 0xc8, 0x18, 0x45, 0xde, 0x9b, 0x68, 0x3a, 0xcf, + 0xa4, 0xf7, 0x0c, 0x8e, 0x2d, 0x02, 0x3a, 0x95, 0x9f, 0x93, 0xb1, 0x0f, + 0x0f, 0x7b, 0xf6, 0xe3, 0xfa, 0x5f, 0xe9, 0xe3, 0xe3, 0xfe, 0x56, 0x4d, + 0xca, 0xc7, 0x12, 0x6e, 0xda, 0x78, 0x87, 0x0f, 0x46, 0xd6, 0xae, 0xed, + 0x33, 0xef, 0xd7, 0x38, 0x5d, 0x43, 0xbc, 0x21, 0x57, 0xc1, 0x1d, 0xcc, + 0x27, 0x7c, 0x87, 0xaf, 0x67, 0x3e, 0x04, 0x6f, 0xe8, 0x5c, 0x3b, 0xe5, + 0x8b, 0x9c, 0xf0, 0x85, 0xf3, 0xba, 0xc5, 0x55, 0xf0, 0xa5, 0x0d, 0xbe, + 0xc0, 0xae, 0xa1, 0x55, 0xa7, 0xc1, 0x05, 0x8e, 0x4d, 0x28, 0x87, 0xcc, + 0x1d, 0xe6, 0x0a, 0xf3, 0xe6, 0x31, 0x5f, 0x5e, 0xe9, 0x1a, 0xc6, 0xe6, + 0xa7, 0x70, 0xe5, 0x8d, 0x98, 0x2b, 0xcc, 0xd9, 0x24, 0x7e, 0x74, 0x80, + 0x55, 0x90, 0xc6, 0x8f, 0x00, 0xf1, 0xa3, 0xc6, 0xf9, 0x4f, 0x1c, 0x0b, + 0x12, 0xfd, 0xac, 0x41, 0x3f, 0x35, 0x85, 0xf3, 0x23, 0xd6, 0x0e, 0xdb, + 0xb1, 0x7e, 0xd8, 0xae, 0x90, 0xda, 0x8d, 0xc7, 0x91, 0x76, 0xcf, 0x32, + 0xb3, 0x38, 0xd2, 0x86, 0x76, 0x3a, 0xa9, 0x8e, 0xda, 0xa9, 0x8e, 0xd0, + 0xa7, 0xa5, 0x54, 0xf8, 0x4c, 0xb0, 0x4c, 0x1f, 0xf1, 0xa3, 0x13, 0x8f, + 0xd9, 0xa2, 0xe4, 0x2e, 0xc3, 0xda, 0xe6, 0xb8, 0x3b, 0x12, 0x6f, 0xd3, + 0x7b, 0x6e, 0x23, 0xbe, 0xe7, 0x7e, 0x45, 0x1f, 0x8f, 0xb7, 0x38, 0x6b, + 0xe2, 0x7b, 0xee, 0x29, 0x9d, 0xef, 0xb9, 0x01, 0x7d, 0x49, 0x1f, 0xbd, + 0xe7, 0x06, 0x63, 0xf7, 0xdc, 0xcc, 0x96, 0xeb, 0xf7, 0x8b, 0xbb, 0x99, + 0x4f, 0x38, 0xf6, 0x32, 0x9f, 0xf6, 0xcb, 0x15, 0xb3, 0x3e, 0x1c, 0x93, + 0x58, 0xef, 0x1c, 0xcb, 0x92, 0xdc, 0xec, 0x6e, 0x98, 0xe9, 0xe2, 0x55, + 0xcc, 0x83, 0x72, 0x6f, 0x3f, 0x5d, 0x18, 0xa9, 0x2e, 0x26, 0x13, 0x9b, + 0xde, 0xa8, 0x36, 0x5e, 0xd5, 0xc7, 0xb5, 0x91, 0x8d, 0x93, 0x69, 0x23, + 0x19, 0x73, 0x47, 0x29, 0xe1, 0x0c, 0x2c, 0x23, 0x1e, 0x09, 0xbe, 0xa3, + 0x21, 0x5e, 0x54, 0xf3, 0xb8, 0xa7, 0x14, 0x78, 0xec, 0x76, 0xf8, 0x2c, + 0x35, 0x8a, 0x8c, 0x0b, 0xaf, 0xff, 0x61, 0x7c, 0x7f, 0xc0, 0xba, 0x0b, + 0x01, 0xff, 0xfe, 0xf1, 0x09, 0x3e, 0xbe, 0x06, 0x3e, 0x66, 0xfb, 0x19, + 0xad, 0xbf, 0x34, 0x52, 0x5f, 0x4e, 0x31, 0x4f, 0x7c, 0x7e, 0x2f, 0xd5, + 0xc8, 0x26, 0x72, 0xb7, 0xfb, 0xc8, 0x8b, 0xde, 0x44, 0xfc, 0x0e, 0x06, + 0x1f, 0x47, 0xf7, 0x8a, 0x2a, 0x75, 0x86, 0x36, 0xbf, 0xc0, 0xba, 0x2d, + 0x71, 0x13, 0x5f, 0x6f, 0x0c, 0xb2, 0xb1, 0xb9, 0x9d, 0xeb, 0xfe, 0x8d, + 0xf3, 0x19, 0x79, 0xdf, 0xb0, 0xef, 0xfb, 0x11, 0xe7, 0xbb, 0x77, 0x81, + 0xc5, 0x3b, 0xe1, 0x34, 0xfd, 0x1e, 0x1c, 0x7b, 0x3b, 0xce, 0x79, 0x93, + 0x5c, 0x17, 0xfe, 0xc3, 0x99, 0xc7, 0x67, 0xbd, 0xf7, 0x39, 0x99, 0x2e, + 0xd3, 0x57, 0x1d, 0xae, 0x93, 0xa9, 0x7e, 0x2a, 0x8a, 0x2e, 0xe2, 0xdc, + 0x5f, 0x19, 0x3b, 0xf7, 0x71, 0x07, 0x3c, 0xc9, 0xf9, 0x7f, 0x96, 0xf3, + 0xef, 0x46, 0x33, 0xf3, 0xd6, 0x4d, 0x97, 0x5c, 0xa9, 0xde, 0xe7, 0x7c, + 0x6c, 0x98, 0x8b, 0x11, 0x1d, 0x7a, 0x14, 0xc9, 0xf3, 0x7c, 0x36, 0xbd, + 0x9b, 0xfa, 0x1c, 0x6d, 0x37, 0x1e, 0xe1, 0x1e, 0x53, 0x8b, 0x7f, 0x17, + 0x72, 0xfb, 0x3c, 0x0f, 0x97, 0xf1, 0x0e, 0x39, 0x47, 0x78, 0xd2, 0x6f, + 0x35, 0x2a, 0xf0, 0xb5, 0xcc, 0x75, 0x85, 0xe2, 0x7b, 0x21, 0xee, 0x6e, + 0x3f, 0x6f, 0x53, 0x12, 0x3b, 0x6a, 0xce, 0x39, 0xac, 0x05, 0x98, 0x88, + 0x06, 0x30, 0x9e, 0x47, 0xac, 0xb2, 0xcc, 0x93, 0x72, 0xf2, 0x5b, 0xd5, + 0x1a, 0xc6, 0x56, 0x4e, 0x72, 0x2e, 0xf9, 0x51, 0xb4, 0x36, 0x88, 0xcf, + 0x44, 0x87, 0xb9, 0xe6, 0x87, 0x07, 0x65, 0x7e, 0xbb, 0x21, 0x7f, 0xeb, + 0x98, 0xc7, 0x7c, 0x02, 0x0f, 0x8b, 0xa2, 0x76, 0xc3, 0x14, 0xf5, 0x9e, + 0x29, 0x96, 0x7a, 0x32, 0x54, 0x52, 0xc8, 0xd1, 0x14, 0xe7, 0x08, 0x3a, + 0xd1, 0x73, 0x58, 0xcb, 0x2d, 0x53, 0xf8, 0xc8, 0xa3, 0xbe, 0xad, 0x58, + 0x62, 0x85, 0x76, 0xb1, 0xc7, 0x47, 0x51, 0x72, 0xa7, 0x35, 0x45, 0x6d, + 0x38, 0xf7, 0x23, 0xcc, 0xcd, 0x6b, 0x62, 0x2d, 0xf3, 0x79, 0xb6, 0x2c, + 0x9d, 0x83, 0x8f, 0xce, 0xf7, 0x77, 0x11, 0x43, 0xf9, 0x3c, 0xcb, 0x23, + 0xe6, 0x59, 0x26, 0x5f, 0xf6, 0xef, 0x62, 0xff, 0xef, 0xf4, 0x80, 0x0f, + 0x72, 0xc7, 0xb7, 0x87, 0x79, 0x1a, 0x63, 0x58, 0x06, 0x17, 0xd9, 0x3e, + 0x8a, 0x82, 0xc5, 0x38, 0x47, 0xc1, 0x5a, 0xe6, 0xca, 0xb7, 0x90, 0xa7, + 0xd7, 0x69, 0xa1, 0x5c, 0x8f, 0xdf, 0x11, 0x72, 0x12, 0xfe, 0x5d, 0xc0, + 0x12, 0x4d, 0x7c, 0xd7, 0xd2, 0xef, 0x80, 0x73, 0xf8, 0x45, 0x1e, 0x83, + 0x73, 0x79, 0xd6, 0xe1, 0x7f, 0x01, 0x17, 0xc6, 0xf1, 0xb2, 0x84, 0x14, + 0x00, 0x00, 0x00 }; +static u32 bnx2_TPAT_b09FwData[(0x0/4) + 1] = { 0x0 }; +static u32 bnx2_TPAT_b09FwRodata[(0x0/4) + 1] = { 0x0 }; +static u32 bnx2_TPAT_b09FwBss[(0x250/4) + 1] = { 0x0 }; +static u32 bnx2_TPAT_b09FwSbss[(0x34/4) + 1] = { 0x0 }; + +static struct fw_info bnx2_tpat_fw_09 = { + .ver_major = 0x1, + .ver_minor = 0x0, + .ver_fix = 0x0, + + .start_addr = 0x08000860, + + .text_addr = 0x08000800, + .text_len = 0x1480, + .text_index = 0x0, + .gz_text = bnx2_TPAT_b09FwText, + .gz_text_len = sizeof(bnx2_TPAT_b09FwText), + + .data_addr = 0x08001ca0, + .data_len = 0x0, + .data_index = 0x0, + .data = bnx2_TPAT_b09FwData, + + .sbss_addr = 0x08001ca0, + .sbss_len = 0x34, + .sbss_index = 0x0, + .sbss = bnx2_TPAT_b09FwSbss, + + .bss_addr = 0x08001ce0, + .bss_len = 0x250, + .bss_index = 0x0, + .bss = bnx2_TPAT_b09FwBss, + + .rodata_addr = 0x00000000, + .rodata_len = 0x0, + .rodata_index = 0x0, + .rodata = bnx2_TPAT_b09FwRodata, +}; + +static u8 bnx2_TXP_b09FwText[] = { + 0x1f, 0x8b, 0x08, 0x08, 0x51, 0xfe, 0x2f, 0x45, 0x00, 0x03, 0x74, 0x65, + 0x73, 0x74, 0x31, 0x2e, 0x62, 0x69, 0x6e, 0x00, 0xcd, 0x7b, 0x7f, 0x70, + 0x1b, 0xe7, 0x99, 0xde, 0xbb, 0x0b, 0x80, 0x04, 0x29, 0x8a, 0x5a, 0x31, + 0x30, 0x83, 0x38, 0xb4, 0x8d, 0x15, 0x17, 0x34, 0x6d, 0xf2, 0x1c, 0x58, + 0xe5, 0xf9, 0xd8, 0x06, 0xb5, 0xd7, 0xc0, 0x92, 0xa2, 0x63, 0x26, 0x47, + 0xbb, 0xcc, 0x9d, 0x92, 0x51, 0x7d, 0x28, 0x48, 0x29, 0x6e, 0xe3, 0xb4, + 0xaa, 0xe3, 0x3f, 0x34, 0x4d, 0x5b, 0xc3, 0x00, 0x25, 0xcb, 0x2e, 0x44, + 0xd0, 0x16, 0x63, 0xa5, 0x33, 0x37, 0x53, 0x18, 0x80, 0x28, 0xe7, 0xba, + 0x24, 0xdc, 0xe4, 0x2e, 0xe9, 0x1f, 0xc9, 0x99, 0xa5, 0x6c, 0xc5, 0x6d, + 0xae, 0x33, 0xbe, 0x3f, 0xda, 0xa6, 0x37, 0xd7, 0x19, 0x8d, 0xfc, 0x23, + 0xce, 0x8f, 0xb9, 0xb8, 0x69, 0x7a, 0x56, 0x5b, 0xd9, 0xe8, 0xf3, 0x7c, + 0xbb, 0x4b, 0x82, 0x32, 0x15, 0x5b, 0xd7, 0x76, 0xa6, 0x9c, 0xc1, 0x10, + 0xfb, 0xed, 0xb7, 0xdf, 0xf7, 0xfe, 0x7e, 0xdf, 0xe7, 0xfd, 0x16, 0x71, + 0x91, 0x6e, 0xf1, 0xff, 0x76, 0xe3, 0x93, 0x38, 0x7a, 0xec, 0xb1, 0x3b, + 0xc6, 0xef, 0xd8, 0x2f, 0x72, 0xe7, 0x9d, 0xb2, 0x2b, 0xaa, 0xf3, 0xe6, + 0xdb, 0x21, 0x91, 0xdc, 0x4f, 0xe5, 0xaf, 0xfc, 0x87, 0xc7, 0x8d, 0x60, + 0x7d, 0x7e, 0x24, 0xaa, 0xa7, 0x5f, 0xcc, 0x64, 0x2c, 0x89, 0x86, 0xd2, + 0x33, 0x9f, 0x9d, 0xb3, 0x44, 0x6c, 0x77, 0x24, 0x91, 0x95, 0xf7, 0x5a, + 0x85, 0x58, 0x58, 0x38, 0x7e, 0x53, 0xfa, 0xca, 0xe3, 0xdf, 0xff, 0x2d, + 0xf3, 0x9d, 0x6a, 0x48, 0xa2, 0x46, 0x3a, 0x27, 0xc6, 0x90, 0x44, 0x07, + 0xf0, 0xcc, 0xef, 0xdf, 0x3a, 0xa5, 0x4b, 0x6f, 0xb0, 0x56, 0x5c, 0x16, + 0x2a, 0x6f, 0xb7, 0xbe, 0x7f, 0x6b, 0x4c, 0xfe, 0x55, 0xd3, 0x90, 0x17, + 0x9b, 0x61, 0x6d, 0xb2, 0xd2, 0x23, 0xa5, 0x8a, 0x2b, 0xc7, 0xcb, 0x05, + 0xc9, 0x36, 0x5f, 0x90, 0xe2, 0xb2, 0xd1, 0x9b, 0x39, 0xf7, 0x07, 0x52, + 0x5a, 0xee, 0xeb, 0xcd, 0x9e, 0x73, 0xa5, 0x58, 0x8e, 0xf7, 0x66, 0x9a, + 0x46, 0x6f, 0xf6, 0x4c, 0x0c, 0xd7, 0x7d, 0xbd, 0x99, 0x33, 0x66, 0x41, + 0xa4, 0x1f, 0x73, 0xe2, 0xbd, 0xd9, 0x8a, 0x99, 0x13, 0x19, 0x4c, 0xbd, + 0x22, 0x03, 0xbd, 0xd9, 0x66, 0x4d, 0x5b, 0x37, 0x34, 0x29, 0xfe, 0x86, + 0x18, 0xbd, 0xe9, 0xcb, 0xad, 0x4f, 0x58, 0x86, 0xec, 0xb5, 0x64, 0xcf, + 0x1e, 0x4b, 0x9e, 0x88, 0xa7, 0xa3, 0x92, 0x3f, 0xdd, 0x25, 0xb6, 0xe2, + 0xc9, 0x90, 0xfc, 0x99, 0x11, 0x63, 0x43, 0x22, 0x62, 0xc7, 0x82, 0xeb, + 0x56, 0x2b, 0x93, 0xfa, 0x02, 0xe5, 0x8a, 0xbd, 0xa4, 0x77, 0xb2, 0x29, + 0x92, 0xa9, 0x44, 0x25, 0x93, 0x7a, 0xaf, 0xe5, 0x3d, 0x13, 0xc5, 0xbe, + 0xe1, 0xde, 0x89, 0x4a, 0xab, 0xe5, 0xa4, 0xb0, 0x47, 0x2a, 0x78, 0x36, + 0x22, 0xd5, 0x98, 0x5d, 0x2d, 0xa5, 0x4c, 0xdd, 0xd3, 0x09, 0x79, 0xe4, + 0xb5, 0x2d, 0xba, 0xf5, 0xdb, 0x92, 0x8f, 0x49, 0xb5, 0x98, 0xba, 0x4b, + 0x9e, 0x4e, 0x19, 0x72, 0x12, 0xeb, 0x3d, 0x95, 0x82, 0x1c, 0xad, 0x63, + 0x5a, 0xa6, 0x69, 0xc6, 0x45, 0x7b, 0x5a, 0x32, 0x67, 0x06, 0x8d, 0xac, + 0x60, 0x6f, 0xab, 0x75, 0x4b, 0x26, 0x85, 0xfd, 0x46, 0xff, 0x67, 0xcb, + 0x8e, 0x99, 0xb9, 0xaa, 0x0c, 0x48, 0xb1, 0x32, 0x98, 0xfa, 0x13, 0xd1, + 0xa4, 0xd3, 0xa2, 0x7c, 0x5a, 0x72, 0x3f, 0xf6, 0xcd, 0x58, 0x18, 0x6f, + 0x8a, 0xad, 0x27, 0x23, 0xf2, 0x0f, 0x0c, 0x33, 0x91, 0x09, 0xf5, 0x4b, + 0xf1, 0x74, 0x27, 0xe8, 0xb4, 0xfb, 0x74, 0xcc, 0x3d, 0x30, 0x26, 0xb1, + 0x5d, 0x22, 0x5a, 0x28, 0x9d, 0xc4, 0xba, 0x22, 0x45, 0x77, 0x00, 0xcf, + 0x26, 0xc7, 0x7f, 0x2a, 0x7b, 0x24, 0xb1, 0x37, 0x2c, 0x25, 0xb7, 0x1b, + 0x72, 0x34, 0xa0, 0x83, 0xe4, 0xf8, 0x5f, 0x40, 0x29, 0xba, 0x95, 0x8c, + 0x1f, 0x93, 0x9c, 0x96, 0x6d, 0x76, 0x48, 0x29, 0x19, 0x95, 0x05, 0xd0, + 0xb1, 0x90, 0xfa, 0xa2, 0x96, 0x39, 0x77, 0x50, 0xcb, 0x9e, 0xc3, 0xbc, + 0x66, 0xdd, 0xb7, 0x35, 0x03, 0xeb, 0xe8, 0x52, 0x4c, 0x1e, 0xc4, 0xbd, + 0xa8, 0xcc, 0x61, 0xde, 0x1c, 0x78, 0x2a, 0x35, 0xf7, 0xc8, 0xfa, 0x6c, + 0xac, 0x37, 0x03, 0x1d, 0x16, 0x71, 0xff, 0xb7, 0x67, 0x34, 0x31, 0x2c, + 0x5b, 0x7e, 0x3c, 0x06, 0x1d, 0x9e, 0x81, 0xfe, 0xce, 0xc4, 0xe5, 0x78, + 0x45, 0x62, 0xba, 0x24, 0xe3, 0x79, 0x79, 0x41, 0xea, 0x2e, 0xf5, 0x0f, + 0x7d, 0x42, 0xdf, 0x45, 0x97, 0xcf, 0x41, 0x6f, 0x15, 0x07, 0xf2, 0x98, + 0x02, 0x0d, 0x0f, 0x6a, 0xf7, 0xd7, 0x67, 0xb5, 0x03, 0xcd, 0x1f, 0x6b, + 0xd2, 0x7d, 0x4c, 0xfb, 0x5c, 0xf3, 0x88, 0xe6, 0xcb, 0x1e, 0xba, 0x8b, + 0x8a, 0x3d, 0x13, 0x95, 0x95, 0xa6, 0xa7, 0xbb, 0x1a, 0xec, 0xd3, 0x36, + 0x6c, 0xe8, 0xe1, 0x6f, 0x6f, 0xce, 0x59, 0x69, 0xc6, 0x64, 0x01, 0xb4, + 0x1d, 0x6f, 0x72, 0xfe, 0xef, 0x41, 0x3f, 0x51, 0x71, 0x6f, 0xed, 0x91, + 0x1c, 0xc6, 0x8b, 0x67, 0xc4, 0xce, 0xa4, 0x74, 0x3c, 0xd3, 0x2b, 0x21, + 0xab, 0x1f, 0x9f, 0x6e, 0x99, 0xab, 0x77, 0xda, 0x21, 0x2b, 0x26, 0x73, + 0x4d, 0xca, 0x10, 0xff, 0x2b, 0x81, 0x1c, 0x49, 0x2b, 0xc7, 0xf9, 0x1c, + 0xc7, 0x0d, 0x8c, 0xb7, 0x8f, 0xd1, 0x2e, 0x7a, 0x41, 0x8f, 0x39, 0x2c, + 0x18, 0xcb, 0x57, 0x92, 0xc6, 0xe7, 0xf8, 0xbf, 0x49, 0xd9, 0x06, 0x32, + 0x0d, 0x63, 0xae, 0x2e, 0xf9, 0x3a, 0xf6, 0x39, 0x7d, 0xa5, 0x15, 0x19, + 0xc3, 0xb5, 0xf5, 0x4b, 0xc8, 0x92, 0xfb, 0x86, 0x41, 0x93, 0x2e, 0xb9, + 0x3a, 0xd7, 0xe2, 0x7d, 0x81, 0xee, 0x8b, 0x7b, 0x75, 0x19, 0x86, 0x7e, + 0x4d, 0xec, 0xd3, 0x85, 0x39, 0x3d, 0x90, 0x1f, 0x78, 0x3d, 0x87, 0xef, + 0xe0, 0x5d, 0xb7, 0x74, 0x3c, 0xdf, 0x29, 0x73, 0x29, 0xda, 0x0b, 0xe9, + 0xdc, 0x85, 0xb5, 0xbb, 0x64, 0xfe, 0x34, 0xe5, 0x01, 0xbb, 0xaa, 0xc4, + 0xa4, 0x74, 0xc6, 0x34, 0x1c, 0x31, 0x21, 0x1b, 0x1b, 0xf3, 0x3a, 0x25, + 0x67, 0xb4, 0x5a, 0x13, 0xa9, 0x11, 0xe3, 0x9b, 0xca, 0xce, 0x47, 0x8c, + 0xa4, 0x26, 0x85, 0x8e, 0xf4, 0x10, 0x64, 0x6b, 0x1e, 0x14, 0xe1, 0xf5, + 0x0f, 0xc4, 0x9e, 0xa5, 0xff, 0xc4, 0xb8, 0x17, 0xfc, 0xa9, 0x1f, 0xf4, + 0xd3, 0xe7, 0x06, 0xa0, 0x97, 0xb8, 0xf2, 0x83, 0x89, 0x1d, 0xfd, 0xc0, + 0x9c, 0xaa, 0x82, 0xdf, 0xe2, 0xb9, 0x30, 0xfd, 0x2f, 0x05, 0x73, 0x93, + 0x5d, 0x56, 0x14, 0xb6, 0x40, 0x5a, 0xc6, 0xb1, 0x7e, 0xab, 0xf5, 0xd9, + 0x94, 0x47, 0x53, 0xf1, 0x8c, 0x8d, 0x67, 0xc3, 0x90, 0xbb, 0xf9, 0x70, + 0x42, 0xed, 0x3f, 0xee, 0xef, 0x6f, 0xc8, 0x1c, 0xe8, 0x2e, 0x56, 0x42, + 0x92, 0x35, 0xb8, 0xc6, 0x9f, 0x71, 0x3c, 0xe7, 0xad, 0x05, 0xbb, 0x3d, + 0x35, 0x68, 0xdc, 0x07, 0x5f, 0xa2, 0x8f, 0x15, 0x57, 0x29, 0x63, 0xac, + 0x33, 0x46, 0x19, 0x1b, 0x8a, 0xc6, 0xcc, 0x19, 0xda, 0x91, 0x0c, 0x84, + 0x84, 0x76, 0x8e, 0x98, 0x01, 0xbb, 0x2a, 0xf9, 0x76, 0x95, 0x77, 0xa9, + 0xff, 0xbb, 0x7d, 0xff, 0xd4, 0x65, 0x28, 0x49, 0x7b, 0x7f, 0x5a, 0xb2, + 0xf0, 0xf1, 0x39, 0xec, 0x54, 0x07, 0x4f, 0xb5, 0xca, 0x20, 0x64, 0x15, + 0xf8, 0x1d, 0xf4, 0x3b, 0xfa, 0x6e, 0x2b, 0x88, 0x05, 0xc5, 0x0a, 0x7d, + 0xa6, 0x68, 0xe8, 0x52, 0xc0, 0x07, 0x76, 0x63, 0x99, 0xc3, 0x99, 0x90, + 0x39, 0x93, 0x03, 0x6d, 0xb0, 0x7b, 0xc9, 0xdc, 0x49, 0x7b, 0xc6, 0x9c, + 0xa6, 0xec, 0x0f, 0xfc, 0xac, 0xe6, 0x52, 0x4f, 0xdd, 0xd8, 0x37, 0xa0, + 0x29, 0x8c, 0x31, 0xae, 0x13, 0x85, 0xcd, 0x07, 0x36, 0x43, 0xfb, 0x33, + 0xed, 0x75, 0xe9, 0x90, 0xe1, 0x24, 0x62, 0xd9, 0x19, 0x1d, 0xfa, 0x1b, + 0x40, 0x4c, 0x09, 0xcb, 0x11, 0xc8, 0xea, 0x4b, 0x15, 0xd2, 0xe7, 0xc0, + 0xef, 0x10, 0xdb, 0xce, 0x4c, 0xc2, 0xcf, 0xa6, 0xb4, 0x09, 0xf8, 0xc4, + 0x67, 0xea, 0xa4, 0xa9, 0x25, 0xf4, 0x4b, 0xe7, 0x5c, 0x4e, 0x9b, 0x6c, + 0x1e, 0xd4, 0xa6, 0xce, 0xd1, 0x4f, 0xe8, 0x23, 0xa6, 0xf1, 0x80, 0x78, + 0x3c, 0x14, 0x9b, 0xaf, 0x68, 0xf4, 0xd5, 0xe2, 0xa9, 0x2e, 0xd0, 0xb1, + 0x0b, 0xf4, 0x18, 0xf0, 0x3d, 0xd8, 0x97, 0x65, 0xce, 0xd0, 0x66, 0x9c, + 0xa4, 0x95, 0xf8, 0xe7, 0xf2, 0x41, 0x39, 0x4c, 0x6c, 0xca, 0x61, 0x04, + 0x32, 0xd9, 0x2e, 0x87, 0x85, 0x0f, 0xca, 0xc1, 0x2e, 0x40, 0x0e, 0x0b, + 0x88, 0x43, 0x0b, 0x4d, 0xf2, 0xdc, 0x12, 0xfd, 0x4e, 0x81, 0x75, 0xca, + 0xbd, 0x7a, 0x9a, 0x36, 0x4a, 0x3f, 0x49, 0x26, 0x4a, 0x58, 0xa1, 0xe1, + 0xf6, 0x28, 0xdf, 0x98, 0x54, 0xb2, 0xf8, 0x30, 0x7e, 0xc9, 0xdf, 0x16, + 0xcf, 0x53, 0x75, 0xc6, 0x1b, 0xd8, 0x79, 0xd2, 0x32, 0xbe, 0x20, 0x5b, + 0x7c, 0xdf, 0xb7, 0xc5, 0x37, 0xf6, 0x09, 0x62, 0x10, 0x79, 0x0e, 0xe2, + 0x31, 0x6d, 0xe5, 0xa5, 0x56, 0xc8, 0xb2, 0xa0, 0x03, 0xda, 0x0b, 0x69, + 0x30, 0x8d, 0xcf, 0x0a, 0xfe, 0x23, 0x2e, 0xd0, 0x97, 0x72, 0x6a, 0x5e, + 0x87, 0xe4, 0xf6, 0x7a, 0xf3, 0xe7, 0x2a, 0xad, 0x5f, 0xe8, 0xe9, 0xf7, + 0x5b, 0x99, 0x31, 0xcb, 0xf7, 0xf1, 0xa8, 0x7c, 0xb9, 0x6e, 0xe6, 0x12, + 0x5a, 0x8f, 0x14, 0x6e, 0x40, 0x5c, 0xa9, 0xd0, 0x3f, 0xfa, 0xaf, 0x11, + 0xcb, 0x06, 0xfc, 0x58, 0xf6, 0x13, 0xc8, 0x9e, 0xb9, 0xe7, 0xf0, 0xfb, + 0xeb, 0x31, 0xfe, 0x4f, 0x1a, 0x33, 0xf2, 0x05, 0xe6, 0x9b, 0x3d, 0xba, + 0x8a, 0xdf, 0x16, 0x73, 0x41, 0x21, 0x9c, 0xee, 0x96, 0xc2, 0x5e, 0x29, + 0x84, 0xd2, 0xf4, 0x23, 0xfa, 0x46, 0x87, 0x4f, 0x77, 0x90, 0x3b, 0xf8, + 0x77, 0x4c, 0x17, 0x8b, 0x73, 0x90, 0x27, 0x2a, 0xe4, 0xe3, 0xbd, 0x40, + 0x27, 0x78, 0x46, 0x22, 0x9e, 0xcd, 0x4d, 0x23, 0x66, 0x52, 0xa6, 0xed, + 0xf6, 0xc2, 0x58, 0x2a, 0x09, 0xdd, 0x62, 0x2c, 0x15, 0x23, 0x94, 0x7e, + 0x50, 0xb3, 0xeb, 0x5f, 0xd4, 0x6c, 0xc8, 0xce, 0x86, 0xec, 0x6c, 0xc8, + 0x2e, 0x03, 0xd9, 0x65, 0x9b, 0xa4, 0x87, 0xb4, 0x78, 0xeb, 0x3b, 0xde, + 0xfa, 0xa0, 0xb3, 0x5f, 0xf2, 0xca, 0xc7, 0xc9, 0x2f, 0x62, 0xb2, 0x8a, + 0x07, 0x93, 0x9a, 0x17, 0x0f, 0xb8, 0xde, 0x14, 0x9e, 0xbf, 0x1b, 0x79, + 0xce, 0xd6, 0x75, 0x6b, 0x4b, 0x26, 0x0b, 0x6d, 0x32, 0x29, 0xb9, 0x94, + 0x11, 0xe7, 0xd3, 0x97, 0x5d, 0xe8, 0x3d, 0x90, 0xcb, 0x34, 0x68, 0xe8, + 0x24, 0xef, 0x3e, 0x1f, 0x5c, 0xbf, 0xcf, 0x5f, 0xff, 0xd3, 0x58, 0x93, + 0xbe, 0xbb, 0xd3, 0xbe, 0xdc, 0x93, 0xb9, 0xf4, 0xd7, 0xf1, 0x83, 0x5a, + 0x02, 0x31, 0xfa, 0x45, 0xf8, 0xda, 0xc5, 0x50, 0x5c, 0xbe, 0x7f, 0xeb, + 0x6b, 0xa8, 0x2f, 0xa4, 0x70, 0x63, 0xba, 0x95, 0x08, 0xa7, 0xdf, 0x6b, + 0x2d, 0x8c, 0x21, 0x7e, 0xa6, 0xcd, 0x78, 0x26, 0x34, 0x2a, 0x2f, 0x35, + 0x87, 0xe5, 0x3b, 0x4d, 0x4b, 0xfe, 0xa8, 0x99, 0x90, 0x3f, 0x6c, 0x0e, + 0xc8, 0xb7, 0x9b, 0x71, 0xf9, 0x56, 0x33, 0xa8, 0x45, 0xe2, 0xb4, 0xa5, + 0x5e, 0xa7, 0xb9, 0x53, 0x3d, 0x04, 0x3b, 0xc7, 0x5a, 0x99, 0xb1, 0x70, + 0x2e, 0x94, 0x56, 0x35, 0xc2, 0xcc, 0xd1, 0xf2, 0xe3, 0x2d, 0xdd, 0xb2, + 0x0a, 0xba, 0xde, 0x33, 0x6e, 0xdc, 0x25, 0x39, 0x3d, 0x8d, 0x31, 0x77, + 0x3c, 0xec, 0x94, 0xbb, 0x90, 0x5f, 0xa2, 0xa8, 0x65, 0x06, 0xa4, 0x80, + 0x75, 0x0b, 0xcd, 0x56, 0x6b, 0x29, 0xf5, 0x0f, 0x3f, 0x65, 0xfc, 0x8d, + 0x7f, 0xd9, 0x29, 0xbd, 0xdf, 0x5e, 0x37, 0x86, 0xfe, 0xbb, 0x5f, 0x0f, + 0xa1, 0xc6, 0xea, 0x57, 0x8b, 0xe7, 0xb4, 0xf4, 0xa8, 0x93, 0x70, 0x37, + 0x70, 0x5f, 0xa2, 0xfd, 0xd6, 0xcf, 0x51, 0x85, 0xc8, 0xee, 0x98, 0xc5, + 0x9a, 0x6b, 0x26, 0xfb, 0x79, 0xfc, 0xff, 0x58, 0x5a, 0xf6, 0xf4, 0xe1, + 0xff, 0xde, 0x34, 0x4c, 0x2a, 0xcd, 0x98, 0xac, 0xb5, 0xc5, 0x64, 0xd1, + 0x1c, 0xe4, 0xdf, 0x05, 0xf0, 0xe4, 0x40, 0x1e, 0xbf, 0xd3, 0x8c, 0x6a, + 0xd9, 0xd3, 0xfd, 0x52, 0xaa, 0x33, 0xaf, 0x71, 0x5e, 0xd4, 0xaf, 0x7b, + 0x78, 0xdd, 0x81, 0x6b, 0x41, 0xae, 0xf9, 0x94, 0x48, 0xaf, 0xf9, 0xa3, + 0xcf, 0x4b, 0xdd, 0xaf, 0x5b, 0x22, 0xb2, 0xac, 0x6c, 0x8c, 0xe3, 0xaf, + 0x65, 0xbf, 0x36, 0xb4, 0x35, 0xfe, 0xec, 0xe6, 0xf8, 0x3b, 0xd9, 0x4f, + 0x6f, 0x8e, 0x77, 0x87, 0x3d, 0x1e, 0xc6, 0xb5, 0x99, 0x66, 0xc1, 0x1f, + 0xbb, 0x0c, 0xb9, 0xb7, 0x5a, 0x0b, 0xc8, 0x3d, 0x45, 0xeb, 0x32, 0xea, + 0x24, 0xc6, 0x9f, 0xeb, 0x89, 0x37, 0xdb, 0x62, 0x8d, 0x91, 0x09, 0x51, + 0x9f, 0x51, 0xf1, 0xd6, 0xe4, 0xfd, 0x4e, 0xc4, 0x9d, 0xcb, 0xf8, 0xce, + 0x3c, 0x17, 0xc4, 0x3c, 0xce, 0xe1, 0xf3, 0x6f, 0x5f, 0x43, 0xe7, 0x31, + 0xe8, 0xfc, 0xff, 0x1b, 0xdd, 0xe2, 0x4f, 0xe9, 0x56, 0xc5, 0x9d, 0x97, + 0xb6, 0xd9, 0x2c, 0xe9, 0xef, 0xf6, 0x69, 0x96, 0x68, 0x38, 0x6d, 0x38, + 0x0b, 0xd6, 0x8d, 0x12, 0x41, 0x0d, 0x4b, 0x9b, 0x2d, 0x35, 0xbf, 0x8b, + 0xe7, 0x99, 0x27, 0x25, 0x1a, 0x49, 0xd3, 0x2e, 0xd6, 0x07, 0x32, 0xd6, + 0x31, 0xa7, 0xe6, 0x1e, 0x73, 0xce, 0x2a, 0x3b, 0x59, 0xbf, 0xc9, 0xab, + 0xcd, 0x7f, 0x74, 0x13, 0x6a, 0x73, 0x3c, 0xcf, 0x98, 0xcb, 0xf1, 0x46, + 0x4f, 0xc6, 0x62, 0x0e, 0x5a, 0x72, 0x8a, 0xf8, 0x2c, 0xa8, 0xb9, 0xaf, + 0x0e, 0x70, 0x6e, 0x67, 0x3a, 0x76, 0xd3, 0x8f, 0xf1, 0xbf, 0x23, 0xfd, + 0xce, 0x4d, 0x17, 0x2c, 0xae, 0x3b, 0x75, 0xd3, 0x59, 0xb5, 0x46, 0x18, + 0xf1, 0x8c, 0xf3, 0x2e, 0xdf, 0xc4, 0x67, 0x9f, 0x44, 0x1c, 0x3f, 0xe1, + 0x42, 0x97, 0xee, 0x8b, 0x4e, 0x1e, 0x9f, 0x39, 0xd2, 0x54, 0xe1, 0x7d, + 0xe3, 0xe6, 0x8c, 0x15, 0x56, 0xf9, 0xf6, 0x4b, 0x98, 0x73, 0x04, 0x73, + 0x0e, 0xbb, 0x01, 0x3f, 0xea, 0xbe, 0x93, 0xc5, 0xfd, 0xc3, 0x65, 0xc3, + 0x71, 0xca, 0xe6, 0x38, 0x6a, 0x8e, 0xf8, 0x71, 0xe4, 0xe3, 0x1c, 0x72, + 0xa0, 0x2d, 0xe6, 0x70, 0x41, 0xd2, 0x5d, 0x93, 0xa8, 0xe5, 0x56, 0x90, + 0x4f, 0x50, 0x87, 0xa4, 0xaa, 0x32, 0xd8, 0x95, 0x39, 0xad, 0xc3, 0x3e, + 0xef, 0x80, 0xbd, 0x1a, 0x8e, 0x9e, 0x44, 0x5c, 0x47, 0xdc, 0x5c, 0xa8, + 0x58, 0x5a, 0xb6, 0x3c, 0x68, 0x94, 0xe4, 0x56, 0x59, 0x37, 0xcc, 0xf8, + 0xa4, 0xec, 0x92, 0x6c, 0x18, 0xf3, 0x86, 0x3f, 0x2e, 0xb9, 0xb8, 0x86, + 0xd8, 0x70, 0x03, 0xe2, 0x16, 0xeb, 0xe4, 0xf6, 0x18, 0xfa, 0x0b, 0x11, + 0xeb, 0x8b, 0x21, 0xc6, 0x9e, 0x4e, 0x8b, 0x75, 0x3f, 0xe7, 0xed, 0x92, + 0x8d, 0x0f, 0xcc, 0x7b, 0xb7, 0x6d, 0x5e, 0xfb, 0xf8, 0x7b, 0x18, 0xdf, + 0x25, 0x17, 0x41, 0x47, 0x38, 0x39, 0x26, 0x25, 0xf0, 0x10, 0x39, 0xd5, + 0x6a, 0x5d, 0x00, 0x3f, 0x3a, 0xf8, 0x2f, 0x56, 0x59, 0x0b, 0x84, 0xa4, + 0x6a, 0xe0, 0x9e, 0xdb, 0x6a, 0xd5, 0x10, 0x46, 0xf5, 0x55, 0xd2, 0x1c, + 0x95, 0x49, 0x77, 0x48, 0xec, 0x06, 0xe5, 0x60, 0xc2, 0xeb, 0xfe, 0xac, + 0x2b, 0x7b, 0x86, 0x39, 0x13, 0x16, 0xb1, 0xfa, 0xe7, 0x5d, 0x19, 0xe4, + 0x3e, 0x7d, 0xf5, 0x62, 0x57, 0x16, 0x7a, 0x0f, 0xad, 0xfe, 0xe7, 0x2e, + 0xe7, 0x34, 0xe9, 0x0a, 0x21, 0xf7, 0xdd, 0x22, 0x45, 0xa3, 0x25, 0xdf, + 0x44, 0x8d, 0x50, 0x1c, 0x46, 0x2e, 0x83, 0x17, 0xe8, 0xa0, 0xbb, 0x60, + 0x48, 0xb4, 0x3b, 0xfd, 0x7d, 0xd0, 0x37, 0x06, 0xd9, 0xec, 0xc2, 0x9c, + 0x10, 0xc6, 0x87, 0xf0, 0xbf, 0x7d, 0xfc, 0x8d, 0x2e, 0xe4, 0x05, 0xc4, + 0x60, 0x89, 0x66, 0xc6, 0x7a, 0xb0, 0xfe, 0xf7, 0x30, 0x8e, 0x09, 0xc9, + 0xcd, 0xf1, 0x27, 0xbc, 0xf1, 0xb7, 0x41, 0x0b, 0x9f, 0x63, 0x8d, 0x22, + 0xd1, 0xb9, 0x31, 0x03, 0x34, 0x70, 0x6e, 0x4c, 0xcd, 0x75, 0xce, 0xd0, + 0x06, 0x0c, 0xa7, 0x66, 0xdd, 0x2c, 0xd9, 0xe5, 0x7e, 0x99, 0x5c, 0xee, + 0x93, 0x03, 0xcb, 0xe6, 0x4c, 0x95, 0xd8, 0x0f, 0x3c, 0x0b, 0xea, 0x30, + 0x7d, 0x55, 0x20, 0x01, 0x33, 0x7e, 0x44, 0x06, 0xe3, 0x5f, 0x92, 0x5f, + 0xb6, 0x90, 0xef, 0x91, 0xeb, 0x7b, 0x24, 0xac, 0xd6, 0x89, 0x07, 0x7b, + 0xd2, 0x46, 0xb7, 0xed, 0xeb, 0x9c, 0xb9, 0xd6, 0xba, 0x70, 0xfe, 0xd5, + 0xf8, 0x55, 0xeb, 0xfe, 0x85, 0xbf, 0xae, 0x81, 0x75, 0x07, 0xb0, 0x26, + 0x79, 0x34, 0xbb, 0x26, 0x4e, 0x8b, 0xdd, 0x09, 0xfa, 0x9c, 0xe4, 0x8d, + 0xc0, 0x86, 0xfd, 0x72, 0x62, 0x99, 0xf1, 0x42, 0xfa, 0xf1, 0x19, 0x8d, + 0x48, 0x72, 0xf8, 0x1c, 0xea, 0xae, 0x09, 0xb5, 0x86, 0x57, 0x93, 0xe9, + 0xab, 0x29, 0xd4, 0xc4, 0x3f, 0x05, 0x3d, 0xac, 0x15, 0xc8, 0x73, 0x18, + 0xfc, 0xa6, 0x50, 0x8b, 0x11, 0x47, 0xb5, 0x1e, 0xcf, 0xa4, 0xf0, 0xfd, + 0x5c, 0xa2, 0x2b, 0x8b, 0x98, 0x08, 0xff, 0xbe, 0x39, 0xa4, 0x72, 0x18, + 0xf5, 0x32, 0xda, 0x45, 0x3c, 0x83, 0xe7, 0xa1, 0x27, 0xca, 0x68, 0xbc, + 0xcb, 0xa9, 0x50, 0x46, 0x02, 0x7a, 0x2c, 0xd8, 0x64, 0x58, 0x61, 0x29, + 0x7d, 0xd5, 0xc6, 0xbc, 0xb7, 0x42, 0xac, 0x77, 0x33, 0x16, 0xbf, 0x23, + 0xe6, 0xac, 0x4e, 0x61, 0x2e, 0xbf, 0xdf, 0x85, 0x75, 0x07, 0x87, 0x8b, + 0xd2, 0x31, 0x7c, 0x18, 0xf1, 0x4e, 0x1f, 0x1b, 0x01, 0x6d, 0xb4, 0xf3, + 0x16, 0xb0, 0xc0, 0x6f, 0x81, 0x1f, 0xf8, 0x46, 0xd2, 0x92, 0xf9, 0x25, + 0xca, 0x55, 0x3e, 0x0e, 0x1e, 0xc0, 0x7f, 0x12, 0x71, 0x8d, 0x3c, 0x70, + 0x6f, 0x41, 0x8e, 0xbe, 0x5b, 0xf2, 0x4b, 0x51, 0x55, 0xeb, 0xdb, 0x06, + 0xf7, 0xd7, 0x34, 0x3d, 0xdd, 0x0d, 0x1d, 0x93, 0xb7, 0x1c, 0x68, 0x7b, + 0x0c, 0x79, 0x80, 0xbc, 0x91, 0x2f, 0xfa, 0xca, 0x28, 0xfc, 0x84, 0xf4, + 0xfb, 0xb6, 0xa7, 0xad, 0x23, 0xa6, 0xa8, 0x38, 0x98, 0xca, 0x20, 0xb0, + 0xbd, 0xd4, 0x1c, 0x97, 0x3f, 0x6e, 0x8e, 0xc9, 0x77, 0x9b, 0x29, 0xe4, + 0xc0, 0x51, 0xe4, 0xc0, 0x61, 0xe4, 0x40, 0x0b, 0x39, 0x30, 0x81, 0x1c, + 0x38, 0x80, 0x1c, 0x18, 0x47, 0x9c, 0x14, 0x39, 0xa1, 0xf2, 0x6d, 0x2c, + 0x0a, 0xcc, 0x1d, 0xb5, 0x9b, 0x0e, 0x78, 0x99, 0xc1, 0x5e, 0xb3, 0xe0, + 0xeb, 0x50, 0xd7, 0x44, 0x65, 0x1c, 0x31, 0xd7, 0x42, 0x3c, 0x4a, 0x20, + 0xdf, 0x8c, 0x01, 0x6b, 0x89, 0x6c, 0x2c, 0x25, 0x10, 0x13, 0x5b, 0xe2, + 0x00, 0x13, 0x97, 0x8c, 0x14, 0x9e, 0xdd, 0xab, 0xec, 0x33, 0x94, 0xbe, + 0x3b, 0x2c, 0xdd, 0xa3, 0x92, 0x2f, 0x9f, 0xc4, 0x58, 0x1c, 0xeb, 0x75, + 0x21, 0x2f, 0x31, 0x2e, 0x30, 0x06, 0x2c, 0x39, 0xbf, 0x6b, 0xd1, 0xd7, + 0xba, 0xb5, 0xcc, 0xe9, 0x82, 0x30, 0x96, 0x23, 0x0f, 0xc0, 0x1e, 0x38, + 0x36, 0x89, 0xe7, 0xf8, 0xfd, 0x2f, 0xfd, 0x98, 0xf9, 0xb1, 0x4e, 0x81, + 0xd1, 0xbe, 0xc4, 0x9c, 0x67, 0x61, 0x3d, 0xb7, 0xdd, 0x4f, 0x9f, 0x47, + 0xad, 0x14, 0xdc, 0x27, 0xae, 0x66, 0x3f, 0xe1, 0x24, 0x68, 0x1e, 0x04, + 0xbe, 0x47, 0x6d, 0x75, 0xb0, 0x8a, 0xef, 0xed, 0xf3, 0x5d, 0xcc, 0x57, + 0x63, 0x51, 0x23, 0x6d, 0xb1, 0x9e, 0x43, 0xac, 0x3c, 0x86, 0xb8, 0x68, + 0x3b, 0xfa, 0x5a, 0x03, 0x7c, 0x42, 0x8e, 0x65, 0xdb, 0x09, 0x0f, 0xbd, + 0xd6, 0x7a, 0xd6, 0x1a, 0x96, 0x89, 0xb5, 0x31, 0xc9, 0xae, 0x0d, 0xc6, + 0xcf, 0x4b, 0xd7, 0x65, 0x5b, 0x5e, 0x6b, 0x95, 0x5c, 0xf3, 0xa4, 0x0d, + 0xbb, 0xdc, 0xb7, 0xdf, 0x90, 0x1a, 0x30, 0xdc, 0xbe, 0xfd, 0x9d, 0xac, + 0xe9, 0x5f, 0x14, 0x3d, 0x21, 0x99, 0x45, 0x5b, 0xc6, 0xf6, 0x07, 0xb5, + 0xe7, 0x2f, 0x3b, 0xa4, 0x1b, 0x63, 0x6b, 0x09, 0xcc, 0x61, 0xdd, 0xaf, + 0xfa, 0x27, 0xe0, 0x59, 0xf3, 0x9e, 0x51, 0x39, 0x8f, 0x98, 0x19, 0xbc, + 0x37, 0x6d, 0xe7, 0xfc, 0x22, 0x70, 0x0d, 0xe4, 0x99, 0x59, 0x24, 0xee, + 0xda, 0x05, 0x39, 0x45, 0x60, 0x23, 0xd4, 0xfd, 0x20, 0x9e, 0x6d, 0xc9, + 0x57, 0x53, 0xb4, 0x87, 0xc7, 0x20, 0x4b, 0xac, 0x15, 0x0e, 0xf8, 0xf9, + 0x9a, 0xcc, 0x2d, 0x51, 0x7e, 0x71, 0xd4, 0x96, 0xdc, 0x5b, 0xa2, 0x5d, + 0xe9, 0xab, 0xeb, 0x46, 0xdb, 0xd9, 0x58, 0xc4, 0xfa, 0x43, 0xc4, 0xd8, + 0x88, 0xd5, 0x65, 0xf6, 0x06, 0x58, 0x53, 0x1d, 0x80, 0x4e, 0xa6, 0x15, + 0xe6, 0xce, 0xd4, 0x53, 0x62, 0x9d, 0x62, 0xac, 0x92, 0x44, 0xc8, 0x22, + 0xbe, 0x17, 0x43, 0x4f, 0xcf, 0xe2, 0x1e, 0xe5, 0xc9, 0x5a, 0x1f, 0xf7, + 0x57, 0xff, 0xa3, 0xd2, 0x49, 0x08, 0xba, 0xcb, 0xef, 0x67, 0x11, 0x22, + 0x4b, 0xa1, 0x34, 0x62, 0xe0, 0x18, 0x79, 0x50, 0x7b, 0xa3, 0x9e, 0xa4, + 0xdf, 0x81, 0x67, 0xd8, 0x46, 0x5b, 0x5d, 0xa9, 0xfe, 0x4a, 0x95, 0x08, + 0x6c, 0x59, 0x0a, 0x91, 0x34, 0x78, 0x1a, 0xc3, 0x77, 0x38, 0xff, 0x09, + 0xe8, 0xf3, 0x2c, 0x9e, 0x5f, 0x00, 0x5f, 0x1b, 0x65, 0xd2, 0x9d, 0x4c, + 0x1c, 0x57, 0xbe, 0x8b, 0x6b, 0x97, 0xb5, 0xcc, 0xd7, 0xe4, 0xbc, 0xe2, + 0xef, 0x13, 0xac, 0x9d, 0xa1, 0xa7, 0xeb, 0xe1, 0x6f, 0xf2, 0x3a, 0xf9, + 0xf3, 0xd6, 0x67, 0xce, 0xca, 0x58, 0x09, 0xc9, 0x96, 0x5f, 0x6a, 0x85, + 0x2d, 0x2b, 0x3e, 0xef, 0xeb, 0x31, 0xeb, 0x46, 0x41, 0x07, 0xfb, 0x00, + 0xfb, 0x95, 0x2e, 0x41, 0x07, 0x6d, 0xa7, 0x10, 0x4d, 0x3f, 0x2e, 0x2b, + 0x4b, 0xff, 0x54, 0x6a, 0x4b, 0x05, 0xa9, 0x2f, 0xfd, 0x23, 0x39, 0xb7, + 0xd4, 0x92, 0x0b, 0x29, 0x15, 0x93, 0xac, 0x0e, 0xe5, 0xcf, 0x72, 0xa3, + 0x87, 0x07, 0x93, 0xe3, 0x97, 0x20, 0xc0, 0x95, 0xaa, 0x47, 0xfb, 0x54, + 0x1b, 0xed, 0x17, 0x60, 0x6b, 0xaf, 0x58, 0xa4, 0x7f, 0x4c, 0x6a, 0x65, + 0xd2, 0xfe, 0xa0, 0xa2, 0xfd, 0xc0, 0x26, 0xed, 0x92, 0x0b, 0x59, 0xa4, + 0x7f, 0x27, 0xda, 0x81, 0xf3, 0xfb, 0x49, 0x7f, 0x02, 0xcf, 0x7e, 0xd0, + 0xfe, 0x6a, 0xee, 0x6b, 0xad, 0x8d, 0x72, 0x44, 0xd1, 0x1c, 0x4a, 0x8f, + 0x41, 0x3e, 0xaf, 0xb5, 0xd6, 0x5d, 0xfa, 0x11, 0xbe, 0xbb, 0xf7, 0x20, + 0x46, 0xf5, 0x61, 0xaf, 0x5e, 0xc9, 0xcf, 0x46, 0x11, 0x27, 0xc7, 0xa1, + 0xdb, 0x2e, 0xe5, 0x87, 0x08, 0x17, 0xd0, 0xd9, 0x34, 0xe6, 0x1f, 0xa2, + 0xbf, 0x29, 0xb9, 0x38, 0x90, 0x4b, 0xb1, 0x9c, 0x8e, 0xa0, 0xfe, 0xc7, + 0x3e, 0x86, 0x93, 0x73, 0xf9, 0xcc, 0x00, 0x62, 0x1a, 0xff, 0x7f, 0x64, + 0x7b, 0x28, 0x20, 0xd6, 0x42, 0xe7, 0x3d, 0x90, 0x1f, 0xe8, 0x18, 0x9b, + 0x41, 0x6e, 0x4d, 0x0e, 0xd7, 0x54, 0x7f, 0x91, 0x71, 0xe5, 0x28, 0xf2, + 0xe9, 0x21, 0x7c, 0xbc, 0xfd, 0x26, 0x9a, 0xdc, 0x73, 0x3b, 0x4f, 0x45, + 0x77, 0x7d, 0x2f, 0x01, 0x52, 0xa6, 0xc9, 0x7d, 0x0b, 0x12, 0x4a, 0x87, + 0xb0, 0x2f, 0xc7, 0x7a, 0x10, 0x63, 0x06, 0xa2, 0xd9, 0xe6, 0xcf, 0x31, + 0x4e, 0x5f, 0x66, 0x7c, 0x0f, 0x68, 0x1f, 0xc5, 0x9a, 0x8c, 0xbb, 0x63, + 0xe0, 0x99, 0x35, 0x26, 0xe3, 0x26, 0xf2, 0x48, 0xe3, 0x47, 0xcc, 0x2d, + 0xf8, 0x3e, 0xe0, 0x7f, 0xe7, 0x7d, 0x89, 0xde, 0x9c, 0x36, 0xab, 0x05, + 0x31, 0xb1, 0x27, 0x74, 0x6e, 0xc5, 0xa5, 0xd8, 0x30, 0x5f, 0x20, 0x66, + 0xd4, 0x29, 0x83, 0x35, 0xca, 0x89, 0xfd, 0x27, 0xd4, 0x7f, 0xb5, 0xe7, + 0x21, 0x8f, 0xa8, 0xec, 0xb5, 0x0e, 0x22, 0xa6, 0x80, 0xfe, 0xca, 0x18, + 0x78, 0x63, 0x8f, 0x66, 0x10, 0xf9, 0x2b, 0x04, 0x21, 0xa0, 0x96, 0x5a, + 0x0b, 0xc9, 0xbd, 0xe1, 0x11, 0xa3, 0x28, 0x8f, 0x46, 0x58, 0x36, 0x17, + 0xd6, 0x98, 0x07, 0xc2, 0xb2, 0xb0, 0x26, 0x72, 0x69, 0x91, 0x71, 0x45, + 0xfd, 0x41, 0xe6, 0x86, 0x33, 0x8f, 0x3c, 0x5b, 0x5a, 0x62, 0x8c, 0x61, + 0x9c, 0xb8, 0x01, 0xba, 0x48, 0x7e, 0xe3, 0xab, 0xc8, 0x49, 0xa5, 0xf2, + 0x20, 0x62, 0xa6, 0xac, 0xeb, 0x90, 0x29, 0x72, 0x19, 0x6b, 0xd4, 0x1d, + 0xfa, 0x32, 0x41, 0x4f, 0x26, 0x2a, 0xc5, 0x45, 0xf6, 0x63, 0xa2, 0xa0, + 0x85, 0x35, 0x76, 0x48, 0xd5, 0x3f, 0x37, 0xa8, 0xd8, 0xca, 0xff, 0xe1, + 0xb6, 0x7d, 0x93, 0x27, 0xf7, 0xe9, 0x8c, 0x63, 0x37, 0x8b, 0x3d, 0x63, + 0x77, 0x1d, 0xa8, 0x74, 0x48, 0xb5, 0x8f, 0x76, 0x49, 0xfd, 0xbf, 0xa0, + 0x62, 0xed, 0x02, 0x78, 0x2a, 0x2e, 0x12, 0xe3, 0x86, 0x31, 0x2f, 0xe6, + 0xcf, 0xa3, 0x5c, 0xff, 0x89, 0xcc, 0xed, 0x7f, 0x17, 0x74, 0x79, 0x71, + 0x2d, 0xbf, 0x1f, 0xf1, 0x76, 0x46, 0x97, 0x3b, 0xef, 0x1a, 0xc7, 0xb3, + 0xcc, 0x81, 0xef, 0xf8, 0x78, 0x92, 0x63, 0xec, 0x61, 0x81, 0xbe, 0x15, + 0x03, 0xff, 0xfb, 0xa4, 0xb0, 0x12, 0x85, 0x1c, 0x90, 0x4b, 0x6b, 0xde, + 0x5a, 0xac, 0x77, 0x4f, 0x42, 0x47, 0xfa, 0xa9, 0xa8, 0x44, 0x4e, 0xf5, + 0x49, 0xf8, 0xeb, 0xdd, 0xd2, 0xf1, 0xf5, 0x21, 0x09, 0x7d, 0xdd, 0x64, + 0x4e, 0x4f, 0x9c, 0x80, 0xbe, 0xe6, 0x65, 0x5c, 0x9e, 0x44, 0xde, 0x62, + 0x5e, 0x57, 0x76, 0x6a, 0xf4, 0x4b, 0x08, 0x05, 0xab, 0xfe, 0x8c, 0x2d, + 0x8f, 0xee, 0xff, 0x85, 0xea, 0x33, 0x01, 0xc3, 0x8b, 0xfe, 0xfc, 0x94, + 0xd8, 0xcd, 0x77, 0x21, 0x6b, 0xc3, 0x79, 0xed, 0xd6, 0xa0, 0xa6, 0x1c, + 0x56, 0xfd, 0xc2, 0x47, 0xf7, 0x7b, 0x35, 0x25, 0xf0, 0xb8, 0xe6, 0xa8, + 0x9a, 0x12, 0xf1, 0x35, 0xcc, 0x79, 0xfd, 0xa2, 0x63, 0xaf, 0xbc, 0x0c, + 0x42, 0x4f, 0xb7, 0x88, 0x7d, 0x08, 0x7e, 0xf1, 0x9c, 0x2c, 0xe9, 0x69, + 0x4d, 0xad, 0x19, 0x7a, 0x86, 0x71, 0x8a, 0xf1, 0x8b, 0x36, 0x9e, 0x4c, + 0x14, 0x61, 0x7f, 0xa1, 0xe7, 0x19, 0xa3, 0x3c, 0xdb, 0x9e, 0x68, 0x8b, + 0x75, 0x0b, 0x95, 0x7b, 0xa0, 0x43, 0xd4, 0xf2, 0x16, 0xe2, 0x9c, 0x81, + 0x5c, 0x6e, 0xf1, 0xda, 0xeb, 0xe1, 0xe5, 0x63, 0x31, 0x75, 0x5d, 0xac, + 0x7a, 0x18, 0xdc, 0x5b, 0x9f, 0x75, 0x07, 0x62, 0x4c, 0x93, 0x74, 0x70, + 0xdf, 0x01, 0x09, 0x3d, 0x17, 0x93, 0xf0, 0x73, 0xb4, 0x3f, 0x33, 0xe1, + 0x40, 0x7e, 0x0b, 0x16, 0x31, 0xd0, 0x0a, 0xb0, 0xc5, 0xcd, 0xa2, 0xaf, + 0x0c, 0xc0, 0x77, 0xcc, 0x78, 0x55, 0x92, 0x12, 0xaa, 0x45, 0xe5, 0xad, + 0x45, 0x33, 0x41, 0x7b, 0x39, 0x6b, 0x61, 0xbc, 0xd9, 0x75, 0x79, 0x5d, + 0x51, 0xc1, 0xb1, 0x2f, 0x87, 0x80, 0x19, 0x86, 0x6d, 0xbd, 0x47, 0x5e, + 0x87, 0xbe, 0x73, 0x6a, 0xec, 0x66, 0xac, 0x0b, 0x1a, 0x9e, 0x33, 0xc1, + 0x03, 0xd7, 0xfd, 0x1e, 0xd6, 0x54, 0xf8, 0xca, 0xd9, 0x60, 0x4d, 0xba, + 0x48, 0xdb, 0xed, 0x83, 0xdd, 0xe1, 0xba, 0xd9, 0x21, 0xb9, 0xd9, 0x84, + 0xe8, 0x8b, 0x9f, 0x91, 0xc1, 0xfd, 0xba, 0xc7, 0x8f, 0xe2, 0x91, 0x63, + 0xec, 0xc7, 0xdd, 0xae, 0xfc, 0x51, 0x5f, 0x83, 0xcd, 0x3c, 0x48, 0x1d, + 0x23, 0xf7, 0x23, 0x8f, 0x31, 0x8e, 0x85, 0x90, 0xc7, 0xb2, 0x4d, 0x4f, + 0xef, 0xd5, 0x07, 0xfb, 0xe5, 0xc9, 0xe7, 0x68, 0x4f, 0xb8, 0xb7, 0x69, + 0x53, 0x41, 0x0f, 0x98, 0xf7, 0x2c, 0x39, 0xf9, 0x6c, 0x50, 0x73, 0xb0, + 0xbe, 0x32, 0xe3, 0x07, 0xc0, 0x8f, 0x7e, 0x27, 0xe3, 0x81, 0xae, 0x6c, + 0x37, 0x6f, 0x59, 0x5e, 0xdd, 0x51, 0x49, 0xb0, 0x2f, 0x6e, 0xb0, 0x4e, + 0xb3, 0xe3, 0x9e, 0xbc, 0x8b, 0x18, 0x2b, 0x35, 0x67, 0x11, 0xa3, 0x23, + 0x72, 0x71, 0xd6, 0x86, 0xee, 0x3f, 0x0b, 0xba, 0x0e, 0x75, 0x11, 0x23, + 0x5f, 0x9c, 0x75, 0x70, 0x7d, 0x48, 0xd5, 0x66, 0xa1, 0x3b, 0x61, 0xc7, + 0xcd, 0x7e, 0xfa, 0x91, 0xaf, 0xa7, 0x84, 0x56, 0x5c, 0x32, 0xb5, 0x12, + 0x62, 0xf6, 0x64, 0x8a, 0x39, 0xbe, 0x53, 0xf5, 0x4d, 0xd9, 0xaf, 0xc9, + 0x2b, 0xbc, 0xb0, 0x4f, 0x2b, 0x56, 0x19, 0xe7, 0x0b, 0xf1, 0x0e, 0x21, + 0x0e, 0x11, 0xad, 0x66, 0x51, 0x27, 0x9a, 0x9c, 0x57, 0xbd, 0x58, 0x11, + 0xc7, 0x3d, 0x42, 0x19, 0x68, 0xf5, 0xea, 0x3e, 0xad, 0x50, 0x0d, 0xc9, + 0xc5, 0x18, 0xe9, 0x4e, 0xa8, 0xfa, 0x7d, 0xbf, 0xb2, 0xb5, 0x1e, 0xe4, + 0x12, 0xd8, 0x4c, 0xea, 0x93, 0xd8, 0x57, 0x8d, 0xc1, 0xa6, 0xa8, 0x7b, + 0xea, 0x5d, 0xc5, 0x48, 0x5f, 0xf7, 0x3b, 0xe5, 0x4c, 0xd0, 0x51, 0x26, + 0x7e, 0xef, 0xf4, 0xf1, 0xfb, 0xa2, 0x5f, 0x0f, 0x3d, 0x26, 0xac, 0x53, + 0x16, 0x2a, 0xa4, 0x05, 0xf1, 0xd6, 0xdd, 0xc9, 0x96, 0x28, 0x47, 0x2f, + 0xa6, 0x1c, 0x45, 0x1d, 0xa3, 0xaf, 0x19, 0xbe, 0x0d, 0xf0, 0x6f, 0x14, + 0xf7, 0xbc, 0x5a, 0xaa, 0xd8, 0x8c, 0xc0, 0xdf, 0xa7, 0x21, 0x23, 0xea, + 0x06, 0xfa, 0x5b, 0xe3, 0x99, 0x0a, 0xf4, 0xb7, 0xf6, 0xf2, 0xfb, 0x76, + 0x1f, 0x63, 0xde, 0xb0, 0x3c, 0x89, 0xf1, 0x13, 0x67, 0x48, 0xcf, 0xb8, + 0x8f, 0xc7, 0x12, 0x90, 0x09, 0x63, 0xfc, 0xa8, 0xbc, 0xd5, 0x70, 0x14, + 0xfe, 0xdb, 0xb7, 0x7f, 0x46, 0xe6, 0xdd, 0x59, 0xe0, 0x3f, 0xc8, 0xdf, + 0x48, 0xc0, 0x3f, 0xe3, 0x2a, 0x3e, 0x1e, 0xfe, 0x68, 0x35, 0x49, 0xd8, + 0xcb, 0xd9, 0xf7, 0x5e, 0x67, 0xce, 0xde, 0x0d, 0xfc, 0xf5, 0x91, 0xd6, + 0x0f, 0x79, 0xeb, 0xff, 0x17, 0xe8, 0xea, 0x73, 0xd8, 0x23, 0x0a, 0xfa, + 0xfa, 0x29, 0xd3, 0x0f, 0x7b, 0x4e, 0xf7, 0x9e, 0xbb, 0xff, 0x3a, 0xe9, + 0x32, 0xa4, 0x01, 0x8c, 0x50, 0x50, 0x79, 0x94, 0xb5, 0x62, 0xc4, 0xd7, + 0xdf, 0x31, 0x60, 0x67, 0xae, 0x1b, 0xc4, 0xde, 0x4e, 0x29, 0xf4, 0x05, + 0xf5, 0x27, 0x62, 0xf6, 0xe6, 0x78, 0x50, 0xcf, 0xf2, 0xf9, 0x94, 0x93, + 0x2f, 0xb3, 0x4f, 0xc8, 0x5c, 0xc0, 0x31, 0x65, 0x87, 0x1f, 0x42, 0xb7, + 0x09, 0xcf, 0x20, 0xdd, 0xf7, 0x29, 0xba, 0x1d, 0x45, 0x37, 0xfd, 0x8b, + 0x67, 0x3a, 0xec, 0xa3, 0x05, 0x7d, 0x33, 0xae, 0x07, 0x4c, 0x00, 0x7d, + 0x7f, 0x17, 0x3a, 0xfe, 0x4e, 0x05, 0x98, 0xa0, 0x02, 0x4c, 0x80, 0x3d, + 0xbe, 0x0d, 0x1d, 0x7f, 0xab, 0x02, 0x4c, 0x50, 0x89, 0xfb, 0x3d, 0x0a, + 0x9b, 0x98, 0xfe, 0x23, 0xda, 0x6e, 0xd0, 0x93, 0xb9, 0xda, 0x2e, 0x39, + 0xce, 0xf9, 0x01, 0x36, 0x8e, 0xc2, 0x8e, 0x78, 0x6e, 0x11, 0xf4, 0x3b, + 0xfc, 0x1c, 0xd1, 0xe0, 0xb9, 0x00, 0x72, 0x44, 0x83, 0xe7, 0x18, 0x23, + 0xf1, 0x10, 0x30, 0x61, 0x48, 0xe2, 0xc2, 0x5e, 0xef, 0xdc, 0x18, 0xd6, + 0x1a, 0x1d, 0x84, 0x27, 0x75, 0xa8, 0xbe, 0xd6, 0x71, 0xd5, 0x6f, 0x40, + 0x5c, 0xa8, 0x06, 0xb5, 0x5b, 0x52, 0x26, 0x96, 0x88, 0x33, 0x65, 0xaf, + 0x9e, 0x86, 0x0e, 0x5c, 0x62, 0xc3, 0xcd, 0xbe, 0xf4, 0x70, 0x1d, 0x7b, + 0x16, 0x2d, 0x8f, 0xbe, 0xe3, 0xee, 0xd6, 0x33, 0x07, 0x10, 0x9f, 0xa7, + 0xca, 0x09, 0x99, 0x2c, 0x7b, 0x98, 0x00, 0xf5, 0xcf, 0x55, 0xfd, 0x51, + 0x9b, 0x7a, 0x80, 0xfe, 0x36, 0x6d, 0x23, 0x71, 0x3e, 0x45, 0x19, 0x53, + 0xff, 0xd3, 0xaa, 0x67, 0x7d, 0xa0, 0xee, 0xf5, 0xe5, 0x27, 0x95, 0x2d, + 0x84, 0x19, 0x67, 0xa8, 0x3f, 0xcf, 0x87, 0x61, 0x17, 0x79, 0x37, 0x90, + 0x4b, 0x3b, 0x1e, 0xf9, 0xbc, 0x26, 0xd6, 0x4e, 0xe3, 0xb9, 0xb6, 0xf1, + 0xcd, 0xfb, 0x3e, 0xbd, 0x88, 0x7d, 0x9b, 0x3d, 0x06, 0xc6, 0xa9, 0xad, + 0xf1, 0x10, 0xea, 0x87, 0xb0, 0xba, 0x8f, 0x18, 0xde, 0x88, 0x49, 0xb6, + 0x61, 0x89, 0x53, 0xe5, 0x3c, 0xf6, 0x2d, 0x18, 0x8f, 0x9e, 0x90, 0xec, + 0x52, 0xaf, 0xe4, 0x62, 0x66, 0xca, 0x96, 0xbf, 0x27, 0x1b, 0xcb, 0x85, + 0x04, 0xcf, 0x0d, 0x0b, 0x33, 0x1a, 0x9e, 0x7b, 0x18, 0xd7, 0xa4, 0xd9, + 0x92, 0xc3, 0x65, 0xe6, 0x9d, 0x91, 0x78, 0x03, 0xf7, 0x72, 0xb3, 0xec, + 0xd5, 0x54, 0x61, 0x93, 0x66, 0xa2, 0x8a, 0x78, 0xf0, 0x72, 0x99, 0xfb, + 0x01, 0x1b, 0x95, 0xd9, 0xcf, 0x09, 0xee, 0x3f, 0x01, 0x1c, 0x88, 0x58, + 0x1d, 0xf3, 0xe7, 0x28, 0x5e, 0x6d, 0x23, 0x2c, 0x81, 0xae, 0x3b, 0x65, + 0xdd, 0x8f, 0xbb, 0xb5, 0xb2, 0xd7, 0x47, 0x39, 0x4b, 0x7a, 0xdc, 0xff, + 0xd5, 0x5a, 0x8f, 0xa1, 0x16, 0xda, 0xe4, 0xf5, 0x8f, 0xb9, 0x8f, 0x81, + 0xb0, 0x2b, 0x27, 0xdc, 0x40, 0x26, 0xbc, 0xcf, 0x31, 0x9e, 0x8d, 0xb6, + 0x5a, 0x67, 0xad, 0xf6, 0x9e, 0xdf, 0xf5, 0xf4, 0xcc, 0xde, 0xb8, 0x2d, + 0x63, 0xbd, 0xe6, 0xa0, 0x26, 0xf6, 0x7b, 0x66, 0x87, 0x46, 0xbc, 0x9e, + 0xd9, 0xfc, 0xc8, 0xf6, 0x9e, 0xd9, 0xcf, 0x6f, 0xf3, 0x7a, 0x66, 0x17, + 0x9d, 0x22, 0x3e, 0x5e, 0xcf, 0x6c, 0xf8, 0x76, 0xaf, 0x67, 0xf6, 0xf0, + 0xed, 0x5e, 0xcf, 0xec, 0x91, 0x11, 0xaf, 0x67, 0xf6, 0xfb, 0xb7, 0x6f, + 0xef, 0x99, 0x3d, 0x36, 0xb2, 0xbd, 0x67, 0x26, 0x13, 0xc8, 0x77, 0x13, + 0x5b, 0x3d, 0xb3, 0xf2, 0xc8, 0xb5, 0x7b, 0x66, 0xaf, 0x06, 0x78, 0x1d, + 0xfc, 0x8c, 0x81, 0x87, 0x14, 0xf0, 0xfa, 0x28, 0xf0, 0xfa, 0xaf, 0xeb, + 0x59, 0x87, 0xc1, 0xe7, 0xcd, 0x7e, 0x5e, 0xb8, 0x1e, 0xdc, 0x7e, 0xbb, + 0xff, 0x8c, 0xa0, 0xde, 0x4d, 0xf8, 0xb5, 0x0a, 0xb1, 0xfb, 0x1e, 0xbf, + 0x66, 0xfb, 0x6b, 0xd1, 0xad, 0xf3, 0xec, 0xf6, 0xff, 0x37, 0xa0, 0xf4, + 0x0e, 0xf0, 0x3c, 0xf9, 0x79, 0x0d, 0xb5, 0x1f, 0xf9, 0x47, 0xa2, 0xef, + 0xbe, 0xe8, 0x7c, 0xd5, 0x22, 0xc6, 0x7f, 0x1c, 0xbe, 0x6a, 0xef, 0x0d, + 0xc9, 0x3a, 0xfc, 0x96, 0x39, 0xea, 0xa4, 0x64, 0x31, 0x3f, 0xab, 0xe6, + 0x27, 0x26, 0xb6, 0xe6, 0xa7, 0x26, 0xbe, 0xaa, 0x6a, 0x52, 0xf3, 0x5f, + 0xe3, 0xf3, 0x0d, 0x65, 0xdf, 0x96, 0x87, 0xe1, 0x9d, 0x4a, 0x80, 0xb7, + 0xc2, 0x3e, 0x76, 0x36, 0x1c, 0xdb, 0x9d, 0xc0, 0x33, 0xe6, 0x8b, 0xb6, + 0x34, 0x14, 0x7e, 0x0f, 0xa5, 0xcd, 0x17, 0x73, 0xaa, 0x5e, 0x33, 0x9c, + 0xbc, 0x1b, 0xd4, 0xdf, 0xa8, 0xa1, 0x86, 0x06, 0xd5, 0xf9, 0x9b, 0xbe, + 0x36, 0x8c, 0x3c, 0xd6, 0x5e, 0x63, 0xb3, 0xae, 0xd6, 0xfd, 0xba, 0xda, + 0x90, 0xbb, 0xf7, 0xb7, 0x63, 0x73, 0x99, 0xf8, 0x5b, 0x0a, 0x9b, 0xef, + 0x42, 0x6d, 0x4e, 0xec, 0x4d, 0x1c, 0x43, 0x0c, 0x41, 0x7c, 0xce, 0x7e, + 0x01, 0xeb, 0x19, 0xe6, 0x46, 0xd6, 0x37, 0x31, 0x7c, 0xf8, 0xbe, 0x41, + 0x80, 0xd1, 0x3b, 0xfc, 0xf8, 0xce, 0xba, 0x28, 0xc0, 0x2a, 0x77, 0x75, + 0x7b, 0xb5, 0xd1, 0x2e, 0xcd, 0xab, 0x3f, 0x13, 0xfe, 0x9c, 0xf0, 0x26, + 0x16, 0x0e, 0x6f, 0x62, 0xe1, 0x6d, 0xe7, 0x30, 0xa2, 0xde, 0x6d, 0x50, + 0xe7, 0x39, 0x3c, 0xdf, 0x11, 0x4d, 0x4f, 0xf3, 0x8c, 0x07, 0x38, 0xc7, + 0xe2, 0x99, 0x0f, 0x7d, 0xe9, 0x41, 0x2d, 0x5b, 0x37, 0x10, 0xef, 0x99, + 0x7f, 0x90, 0x6b, 0xcb, 0xc1, 0xd9, 0x62, 0xa0, 0x27, 0xca, 0x8e, 0x63, + 0x7f, 0xaa, 0xa1, 0xe6, 0x4d, 0x45, 0xac, 0x43, 0xa0, 0x65, 0x0a, 0xff, + 0x03, 0x99, 0xde, 0xa3, 0x72, 0x5f, 0x27, 0x6c, 0xf6, 0x78, 0x85, 0xd8, + 0xf5, 0x71, 0x69, 0xf8, 0xf8, 0x75, 0x65, 0xc9, 0xc3, 0xae, 0xe1, 0xed, + 0xd8, 0x35, 0xb5, 0x21, 0x1e, 0x8d, 0x07, 0x76, 0xa4, 0xd1, 0x70, 0x5e, + 0x19, 0x22, 0x66, 0x25, 0x9d, 0xcc, 0x3d, 0xd3, 0x88, 0x81, 0xcc, 0x39, + 0xcc, 0x37, 0xc4, 0xa5, 0xd7, 0xa2, 0x4f, 0x8d, 0x1d, 0xed, 0xb0, 0xa2, + 0xf8, 0xcc, 0x83, 0x8e, 0x19, 0x3c, 0x93, 0x96, 0x85, 0xd3, 0x5f, 0xd1, + 0x9c, 0xfa, 0x3c, 0xe8, 0x99, 0x42, 0xae, 0xa3, 0x2d, 0x15, 0x0c, 0xcf, + 0x8e, 0xd6, 0x11, 0xf7, 0x5d, 0xc6, 0x02, 0xd4, 0xae, 0xa8, 0x47, 0xca, + 0x8c, 0xbd, 0x3c, 0xeb, 0x0a, 0x62, 0x2e, 0xfb, 0x26, 0xa8, 0x59, 0x59, + 0xbb, 0x2e, 0x72, 0xdf, 0xed, 0xba, 0xa8, 0xb9, 0xc4, 0x5d, 0x86, 0xb3, + 0xbe, 0x46, 0xdc, 0xf8, 0x51, 0x31, 0xa4, 0xe1, 0xbc, 0x3c, 0x44, 0x1c, + 0x79, 0x3d, 0xf8, 0xd1, 0x84, 0x34, 0xcd, 0x17, 0xd6, 0xf5, 0x76, 0xfc, + 0xe8, 0x61, 0xc7, 0xcc, 0xda, 0x41, 0xac, 0xc9, 0xda, 0x8c, 0x38, 0xd1, + 0x44, 0x98, 0x1b, 0xc4, 0xb3, 0x83, 0xe0, 0xc7, 0xc3, 0x8a, 0x59, 0x60, + 0xc5, 0xbf, 0x03, 0xac, 0x58, 0x92, 0xf7, 0xa2, 0xc4, 0x8a, 0xb6, 0x8f, + 0x15, 0x1d, 0xd8, 0x71, 0x7e, 0x9b, 0x1d, 0x6b, 0xaa, 0x07, 0xc5, 0x7b, + 0x79, 0x60, 0xbd, 0xec, 0xa2, 0x79, 0x1d, 0xf8, 0x50, 0x93, 0x98, 0x3a, + 0xaf, 0x0f, 0xb7, 0xad, 0x19, 0xe0, 0xc0, 0x7d, 0x0a, 0xdf, 0xdd, 0x57, + 0xd9, 0x85, 0xda, 0x44, 0xe1, 0x3d, 0xff, 0x9c, 0x2f, 0x7c, 0xd5, 0xd9, + 0x67, 0xb8, 0xed, 0xec, 0x73, 0x0b, 0x17, 0xe2, 0x39, 0xbf, 0xc7, 0x17, + 0x81, 0xde, 0xfe, 0x07, 0x69, 0x82, 0x5f, 0xd1, 0x07, 0x34, 0xcf, 0x4f, + 0xb6, 0xe1, 0xc3, 0xff, 0x7a, 0x15, 0x3e, 0x44, 0xce, 0x5a, 0x89, 0x49, + 0x06, 0xd8, 0xd0, 0x5e, 0xe3, 0x5a, 0xf4, 0xe5, 0x51, 0xe9, 0x00, 0x7f, + 0x9d, 0x8b, 0x7d, 0xc0, 0x44, 0xdd, 0x12, 0x05, 0x36, 0x8a, 0x28, 0x6c, + 0x34, 0x44, 0x0c, 0x33, 0x7c, 0x18, 0x98, 0xa6, 0xb1, 0x89, 0x8f, 0xcc, + 0xd4, 0x0f, 0xa0, 0x97, 0x87, 0x95, 0xad, 0x8c, 0xcb, 0x53, 0x88, 0x9d, + 0x1d, 0x6b, 0xc0, 0x75, 0x2b, 0x1e, 0x6e, 0x8a, 0x5c, 0x85, 0x9b, 0x8e, + 0xec, 0x88, 0x9b, 0x54, 0xbf, 0x7e, 0x9c, 0x32, 0x79, 0xdd, 0xf5, 0xfa, + 0xf5, 0x97, 0x5c, 0xaf, 0x5f, 0xff, 0xba, 0xdb, 0xde, 0xaf, 0xbf, 0x49, + 0x8a, 0x86, 0x69, 0x5f, 0x94, 0xab, 0xfa, 0xf5, 0x33, 0xec, 0x7f, 0x57, + 0xbb, 0xbc, 0xbe, 0x7c, 0xb7, 0xdf, 0xaf, 0x37, 0xa5, 0xb8, 0x6d, 0xdc, + 0x90, 0xb7, 0xad, 0xa0, 0x5f, 0xff, 0x2f, 0x30, 0xd6, 0x83, 0x3d, 0xb6, + 0xf7, 0xea, 0x2f, 0xb9, 0xec, 0xd5, 0xc7, 0x38, 0xcf, 0xef, 0xd5, 0x73, + 0x1e, 0x6a, 0x78, 0x97, 0x7d, 0xfa, 0x9b, 0x21, 0x8b, 0x7e, 0xc8, 0xa1, + 0x4f, 0x3a, 0x9e, 0x8b, 0x73, 0x8e, 0xea, 0xcf, 0x5f, 0x74, 0x63, 0x78, + 0xce, 0xeb, 0xa3, 0x1f, 0x86, 0x5d, 0x1d, 0xd9, 0xec, 0xcf, 0x7b, 0x7b, + 0xbc, 0xe1, 0x6e, 0x5f, 0x7f, 0xfb, 0x3a, 0x03, 0xfe, 0x3a, 0x31, 0xac, + 0x13, 0xbf, 0x6a, 0x9d, 0xad, 0x7e, 0xfc, 0x1b, 0xae, 0xd7, 0x8b, 0x77, + 0x4e, 0x8b, 0xdd, 0x81, 0x98, 0xfc, 0xe2, 0xd0, 0x8d, 0xfe, 0x1a, 0x9b, + 0xbd, 0x78, 0xc6, 0x0e, 0xe0, 0x75, 0xc6, 0x0f, 0x3e, 0xff, 0xff, 0xbe, + 0x17, 0xcf, 0x3e, 0xbc, 0x77, 0x9e, 0x42, 0xff, 0x04, 0x2e, 0x7f, 0xd6, + 0xeb, 0xc1, 0x4f, 0x54, 0x82, 0xde, 0x3a, 0xeb, 0xc6, 0xe0, 0xbd, 0x8c, + 0xc1, 0xc4, 0x71, 0xa1, 0xad, 0x90, 0x3e, 0xae, 0xdb, 0x23, 0x73, 0x0a, + 0x17, 0xc1, 0xa6, 0x92, 0xd7, 0xc6, 0xc6, 0xb5, 0xc5, 0x00, 0x1b, 0xc7, + 0x14, 0x36, 0xae, 0xad, 0x05, 0xd8, 0x38, 0x73, 0x0d, 0x6c, 0xfc, 0xdf, + 0xba, 0xbc, 0xf8, 0x1f, 0x95, 0x82, 0xc2, 0xc6, 0xd7, 0x7a, 0xc7, 0x86, + 0xf7, 0xba, 0x89, 0x03, 0xc4, 0x3b, 0x17, 0xef, 0xbb, 0x86, 0xaf, 0x05, + 0x78, 0x99, 0xb9, 0xbe, 0x5f, 0x66, 0x9e, 0xdb, 0xc2, 0xcb, 0x1e, 0x26, + 0x36, 0x13, 0x47, 0x55, 0x2e, 0x04, 0x3e, 0x68, 0xb2, 0xef, 0x7d, 0x48, + 0xd9, 0x6e, 0xa9, 0x32, 0xab, 0x70, 0x59, 0x1e, 0xb5, 0x6d, 0x51, 0xe1, + 0x60, 0x62, 0xe0, 0x2e, 0x91, 0xbe, 0x20, 0x17, 0x05, 0x18, 0x33, 0xec, + 0xc7, 0x67, 0x9e, 0x29, 0xbc, 0x1d, 0xca, 0x10, 0x03, 0xbb, 0x41, 0x8d, + 0x40, 0x39, 0x0f, 0x23, 0x76, 0x19, 0xbe, 0xac, 0x3c, 0x9f, 0xdd, 0xb7, + 0xff, 0x87, 0xef, 0xdb, 0x06, 0xe3, 0x5a, 0x80, 0x11, 0x51, 0x03, 0x55, + 0xc6, 0xd5, 0xbb, 0x0e, 0x1e, 0x46, 0xf4, 0xf0, 0x61, 0xd6, 0x9d, 0x01, + 0x4e, 0x9e, 0x95, 0x09, 0xe0, 0xf3, 0xf5, 0xdf, 0x65, 0xef, 0x29, 0xc0, + 0x44, 0x36, 0xfe, 0xb7, 0xf7, 0xa2, 0x78, 0xdd, 0xa1, 0xce, 0xfe, 0xce, + 0x0f, 0x45, 0xdb, 0xc6, 0xff, 0x3e, 0xe2, 0x37, 0xea, 0xa1, 0x0a, 0x73, + 0x1d, 0xb1, 0xd0, 0x6f, 0x40, 0x07, 0x63, 0xd7, 0xc0, 0x42, 0x57, 0xe7, + 0x26, 0xe6, 0xcb, 0xad, 0xbc, 0xe4, 0x6c, 0xe6, 0x25, 0xee, 0xf1, 0xeb, + 0x72, 0x27, 0xc7, 0x6c, 0x23, 0x62, 0x4d, 0xe1, 0x33, 0x8f, 0x7c, 0xbd, + 0x3d, 0x37, 0xcd, 0x5d, 0x47, 0x6e, 0x9a, 0x50, 0xb9, 0x89, 0xf4, 0xa2, + 0x9e, 0x83, 0x4c, 0xbe, 0x0b, 0x59, 0x7e, 0x07, 0xb4, 0xff, 0x11, 0xf8, + 0xf9, 0x43, 0x60, 0xac, 0x6f, 0x03, 0x63, 0x7d, 0xab, 0xd2, 0xfe, 0x0e, + 0xc3, 0xb8, 0xb0, 0x0e, 0xf4, 0xea, 0x66, 0x0f, 0xc3, 0x1f, 0x86, 0x57, + 0x35, 0xca, 0x86, 0x33, 0x57, 0x1e, 0x31, 0xe6, 0xbd, 0xf3, 0xd2, 0x44, + 0x4e, 0xd2, 0x88, 0x11, 0xcc, 0x15, 0xea, 0x3a, 0xce, 0x7e, 0x25, 0xb1, + 0x42, 0x5d, 0xd5, 0x93, 0x43, 0x52, 0x6d, 0x78, 0xf8, 0x6a, 0xe1, 0x8c, + 0xb7, 0xc6, 0x9c, 0x8f, 0xaf, 0xf2, 0x3e, 0xbe, 0xca, 0x35, 0x36, 0x12, + 0xac, 0xcf, 0x17, 0x52, 0xdb, 0x31, 0xd5, 0x61, 0x1f, 0x53, 0xcd, 0xff, + 0x15, 0x31, 0x15, 0xf7, 0xca, 0xe3, 0x99, 0xc9, 0xa5, 0x84, 0x1c, 0x80, + 0x7c, 0x27, 0xca, 0xd4, 0x93, 0x69, 0xc3, 0x6e, 0x3e, 0x44, 0x57, 0x8e, + 0xd2, 0x4b, 0x28, 0xe9, 0xe9, 0x69, 0x12, 0x7a, 0x9a, 0xf8, 0xb5, 0xf5, + 0x8d, 0x1a, 0x33, 0xde, 0x1c, 0x8b, 0xe2, 0xf3, 0x7f, 0xaa, 0x23, 0xd2, + 0x4f, 0x3d, 0x5d, 0x8d, 0xb9, 0xae, 0x07, 0x7b, 0x6d, 0xc7, 0x5d, 0xb6, + 0xc2, 0x5d, 0x1d, 0xfe, 0x9c, 0x99, 0x89, 0x49, 0xe8, 0xf0, 0xdf, 0x63, + 0xce, 0x9f, 0xc0, 0xb7, 0x7e, 0x88, 0x78, 0xfd, 0xef, 0xa0, 0x8b, 0x7f, + 0x8b, 0xda, 0xe0, 0x55, 0xe4, 0x9f, 0x1f, 0x60, 0x6c, 0x0b, 0xc7, 0xa8, + 0x33, 0xfa, 0xd1, 0x8c, 0x95, 0x98, 0x28, 0xba, 0x89, 0x09, 0x0f, 0x7f, + 0xfc, 0xea, 0x6f, 0x66, 0xac, 0x29, 0xbe, 0xc3, 0x00, 0xf9, 0xfe, 0xf9, + 0xdd, 0x73, 0x0a, 0x7b, 0x04, 0x98, 0x23, 0x67, 0x73, 0xff, 0x92, 0x9b, + 0x9a, 0xa8, 0xe1, 0xe3, 0x61, 0x9b, 0xef, 0xd9, 0x1e, 0xb6, 0x59, 0xfa, + 0xeb, 0xd4, 0xbb, 0x87, 0x6b, 0x1e, 0x4e, 0xd3, 0xaf, 0xeb, 0xc0, 0x1c, + 0x35, 0xf8, 0x64, 0xa1, 0x69, 0xab, 0xcf, 0xf1, 0x8a, 0x6d, 0x46, 0x20, + 0x1f, 0xf6, 0x58, 0x4f, 0xd1, 0x0b, 0x5d, 0xd3, 0x28, 0x13, 0x81, 0xba, + 0x66, 0xfc, 0x9f, 0xf9, 0xd7, 0x4f, 0xfb, 0xd7, 0x4f, 0xf9, 0xd7, 0x27, + 0x91, 0x77, 0x9f, 0x54, 0xb9, 0x93, 0xe3, 0x1c, 0x83, 0x72, 0x5d, 0xac, + 0x85, 0xf5, 0xce, 0x8e, 0xfe, 0xb4, 0x55, 0x8d, 0x79, 0xfe, 0x5c, 0x68, + 0x3a, 0xf8, 0xfc, 0x63, 0x7c, 0x0e, 0xe2, 0x33, 0x8d, 0xcf, 0x63, 0xf8, + 0x6c, 0xca, 0x54, 0xcb, 0x56, 0xa8, 0xa3, 0x61, 0xc9, 0x62, 0xbc, 0x88, + 0x3a, 0x34, 0x93, 0x7a, 0x44, 0x8a, 0xf5, 0x92, 0x94, 0x96, 0x34, 0xe9, + 0xb6, 0xd2, 0x52, 0xaa, 0x1f, 0x93, 0xe3, 0x4b, 0xde, 0xb9, 0x61, 0x57, + 0xda, 0xc6, 0xdc, 0x96, 0x3c, 0x9c, 0x7a, 0x5c, 0xf4, 0x3b, 0x8f, 0x61, + 0x9e, 0xe8, 0xc5, 0xd1, 0xdb, 0xd4, 0xf9, 0x58, 0x3d, 0xe5, 0xc9, 0xf8, + 0x80, 0x65, 0x9b, 0xc8, 0x5b, 0xc3, 0x4f, 0x62, 0xed, 0x8c, 0x7a, 0x3f, + 0x30, 0x2d, 0x27, 0x4e, 0x6f, 0xec, 0xf5, 0x62, 0xa9, 0x69, 0xbc, 0x81, + 0x4d, 0xeb, 0xe0, 0xc3, 0x46, 0xec, 0x9b, 0x82, 0x9d, 0x1f, 0x71, 0xc3, + 0xda, 0x04, 0x62, 0xe0, 0x84, 0xab, 0x6a, 0x3d, 0xc4, 0x2a, 0xc3, 0x49, + 0x9e, 0x8a, 0xe1, 0x9a, 0xef, 0xd0, 0x20, 0x0f, 0x2a, 0x5b, 0xd9, 0x00, + 0x8e, 0xd1, 0x54, 0xbf, 0xaf, 0xb4, 0x79, 0x0e, 0xa4, 0xfa, 0xff, 0x4e, + 0x32, 0xa9, 0x4b, 0x7e, 0x8c, 0x38, 0xd6, 0x56, 0xb9, 0xa8, 0x51, 0xb6, + 0x3f, 0xc1, 0xda, 0xf0, 0x75, 0x61, 0x5e, 0xbb, 0x07, 0xf3, 0x06, 0x10, + 0x7f, 0x71, 0xaf, 0x09, 0x5e, 0x4e, 0x93, 0x57, 0x3e, 0x83, 0xda, 0xb6, + 0xfa, 0x49, 0xbd, 0xb8, 0xe4, 0xd7, 0x44, 0xaa, 0x76, 0x48, 0x48, 0x7d, + 0xf3, 0xcc, 0xc9, 0xeb, 0x93, 0xd4, 0xdd, 0x00, 0x3b, 0xf4, 0x60, 0x0e, + 0xeb, 0x08, 0xc8, 0xc8, 0x3b, 0x27, 0x53, 0x67, 0x64, 0x45, 0xf7, 0x93, + 0x7a, 0x69, 0x29, 0x83, 0x71, 0xf6, 0xa4, 0xf1, 0xbd, 0xaa, 0x2b, 0xec, + 0x7f, 0x31, 0x74, 0x58, 0x1a, 0xd5, 0x16, 0xe8, 0x45, 0x8e, 0xdd, 0x7b, + 0x58, 0x6a, 0xd5, 0x79, 0x79, 0xa1, 0xba, 0xb1, 0x0b, 0xd8, 0x09, 0x32, + 0x25, 0xfd, 0x3d, 0x3e, 0xfd, 0x54, 0x41, 0x30, 0x0e, 0x79, 0x9e, 0x2e, + 0xc4, 0xbd, 0xba, 0x96, 0xb8, 0xed, 0x24, 0xdf, 0x1b, 0x8c, 0xf3, 0x3d, + 0xbe, 0x23, 0xcb, 0xb4, 0xc9, 0x8b, 0xf7, 0x2e, 0x58, 0x9f, 0x92, 0x0b, + 0xa9, 0x3d, 0xb2, 0x91, 0x52, 0xf5, 0x2f, 0xf1, 0x01, 0x7c, 0xdb, 0x34, + 0xd6, 0xe5, 0x6e, 0x39, 0x01, 0x3f, 0xbd, 0x90, 0xca, 0xa9, 0xf3, 0x9b, + 0xe3, 0x4d, 0x62, 0xfb, 0x79, 0xd6, 0x54, 0xb2, 0xae, 0x7a, 0x60, 0xad, + 0xd6, 0x64, 0x8a, 0xb1, 0xa7, 0x43, 0x36, 0x14, 0xd6, 0xf2, 0x7a, 0xe3, + 0x1b, 0xb3, 0x9e, 0x6f, 0x84, 0x94, 0xbd, 0xff, 0x1b, 0xd0, 0x71, 0x0c, + 0x36, 0x1b, 0x51, 0x73, 0x42, 0xe9, 0x4e, 0x7f, 0x8e, 0xc2, 0x66, 0x6d, + 0x73, 0xc6, 0xc7, 0x33, 0x96, 0xf1, 0xa9, 0x8c, 0x35, 0x36, 0xe1, 0xf5, + 0x53, 0x4c, 0xc3, 0xd6, 0x2e, 0xb6, 0x82, 0xf7, 0x4d, 0xa6, 0xe0, 0x4f, + 0x2f, 0x6d, 0x62, 0x63, 0x18, 0xe7, 0xf3, 0x0b, 0xd0, 0x6b, 0x58, 0x3a, + 0x4e, 0xb5, 0xee, 0x99, 0x4b, 0x8d, 0x24, 0x8e, 0x08, 0xdf, 0x30, 0x62, + 0xfd, 0x6c, 0x82, 0xda, 0x05, 0xe4, 0xc3, 0x2b, 0xc4, 0x08, 0xc3, 0xe7, + 0xe5, 0xca, 0x3d, 0x99, 0xd4, 0x7e, 0xad, 0x36, 0x8b, 0xea, 0xe4, 0xf9, + 0x29, 0xe6, 0xd3, 0xa3, 0xec, 0x7d, 0x86, 0x4e, 0xbd, 0xad, 0x39, 0x65, + 0xf5, 0x8e, 0x39, 0xf4, 0xd2, 0xd2, 0xe6, 0x21, 0x37, 0x3c, 0x3f, 0xc3, + 0x04, 0xa8, 0x5b, 0x83, 0x09, 0x47, 0x72, 0xec, 0x71, 0x49, 0x7e, 0x59, + 0xf6, 0x65, 0x10, 0x47, 0xed, 0x99, 0x0e, 0x99, 0x6f, 0x18, 0xce, 0xe0, + 0xe2, 0x51, 0xac, 0x31, 0x87, 0xb5, 0xa6, 0x51, 0x83, 0xcc, 0x22, 0x27, + 0x53, 0xae, 0x8c, 0xd5, 0x0f, 0x43, 0x46, 0x37, 0xf1, 0xcc, 0x78, 0x3c, + 0x27, 0xe6, 0x4c, 0x41, 0xad, 0xfb, 0x9e, 0x96, 0x1f, 0xfd, 0x18, 0x72, + 0x5a, 0x58, 0x0e, 0x24, 0x45, 0x9f, 0x4e, 0x86, 0xdf, 0x9f, 0xb3, 0x38, + 0x16, 0xe5, 0x98, 0x8e, 0xb1, 0xf0, 0xe7, 0x92, 0x51, 0x3d, 0x93, 0x34, + 0xc7, 0xd9, 0xef, 0x0d, 0x59, 0x73, 0x12, 0x7a, 0xbe, 0xb7, 0x47, 0xba, + 0xa7, 0xa5, 0x77, 0xd5, 0x1c, 0x7f, 0x1d, 0xb4, 0x84, 0x55, 0x6c, 0x9f, + 0x13, 0xdd, 0x1f, 0xef, 0xd9, 0x1c, 0x0f, 0xfb, 0xe3, 0xd3, 0xd2, 0xbd, + 0x3a, 0x62, 0xbc, 0x29, 0x87, 0xb1, 0x66, 0x48, 0x2e, 0xa1, 0xa6, 0xb1, + 0x86, 0xe6, 0xe0, 0x73, 0x0f, 0x91, 0x96, 0x83, 0xc0, 0x14, 0xf0, 0x09, + 0xd4, 0xd9, 0xd6, 0x27, 0xe5, 0x4b, 0x46, 0x97, 0xe4, 0x55, 0x4d, 0x1b, + 0xf6, 0x7a, 0xa5, 0xb0, 0xf3, 0x5b, 0x87, 0xa6, 0x77, 0x7b, 0xfd, 0x00, + 0x9e, 0x67, 0x8c, 0x62, 0xec, 0x4a, 0x6b, 0xc5, 0xe2, 0x18, 0xef, 0x5d, + 0x69, 0xd5, 0xad, 0x11, 0x23, 0xab, 0x45, 0xfd, 0x73, 0xed, 0x79, 0xc5, + 0x7b, 0xa1, 0x3a, 0x68, 0xd4, 0xe4, 0x16, 0x2d, 0x7b, 0x03, 0xf2, 0x83, + 0xfb, 0x19, 0xcc, 0xbd, 0xd2, 0xca, 0x58, 0xf3, 0xaa, 0x7f, 0x5f, 0x93, + 0xe0, 0x9a, 0xeb, 0x8c, 0x18, 0x93, 0xea, 0xd9, 0x11, 0xe3, 0x84, 0xd6, + 0xfe, 0xac, 0xa1, 0x4d, 0x6e, 0x7b, 0xb6, 0x5b, 0xc9, 0x28, 0x64, 0x79, + 0x73, 0x4a, 0xd5, 0x69, 0x79, 0xda, 0xe5, 0xbc, 0x2b, 0xad, 0xac, 0x15, + 0xd1, 0x4e, 0xdc, 0xc0, 0x18, 0xc8, 0xb9, 0x97, 0xaf, 0xda, 0x87, 0xd7, + 0xd7, 0xda, 0xe3, 0x5d, 0xd9, 0xbe, 0xc7, 0x2e, 0x35, 0xe7, 0x82, 0x9a, + 0x13, 0x56, 0xb2, 0xde, 0xbe, 0xcf, 0xcf, 0x64, 0xfb, 0x3e, 0xdd, 0x9b, + 0x3c, 0x97, 0xb0, 0xe6, 0x93, 0x98, 0x5b, 0x76, 0x07, 0xe3, 0x75, 0xb9, + 0xdc, 0xca, 0x5b, 0x17, 0xe5, 0xc2, 0xe6, 0xda, 0xbf, 0xc2, 0x75, 0x3b, + 0x4d, 0xbf, 0xf2, 0x69, 0xe4, 0x77, 0x8e, 0x3d, 0xaa, 0xe4, 0xbd, 0xdb, + 0x1a, 0x3c, 0x58, 0xd3, 0xcc, 0xf1, 0x9f, 0x09, 0x75, 0x75, 0x44, 0xc5, + 0x98, 0xdb, 0xa0, 0xa7, 0x7d, 0xcf, 0xc0, 0x67, 0x47, 0x6d, 0x35, 0xe7, + 0x92, 0x35, 0x2d, 0xfb, 0x4e, 0x0d, 0x1a, 0x97, 0x10, 0xdb, 0x9c, 0x18, + 0xaf, 0x51, 0x2b, 0x59, 0x7c, 0x27, 0xfe, 0x4e, 0xd6, 0x01, 0xd0, 0xe5, + 0xe0, 0xf0, 0xcf, 0xe4, 0xa8, 0x9c, 0xa8, 0x1c, 0x43, 0x2e, 0x9c, 0x93, + 0xe1, 0x67, 0x90, 0x37, 0x2a, 0x05, 0x3c, 0x49, 0x9f, 0xf5, 0x72, 0xe0, + 0x9c, 0x7a, 0xcf, 0xfc, 0x24, 0xea, 0x64, 0xd8, 0x6e, 0x79, 0x70, 0x78, + 0x05, 0xcf, 0xbc, 0xa0, 0x70, 0xa8, 0x2b, 0x0d, 0xf8, 0x40, 0xe2, 0xf9, + 0x3d, 0xb2, 0xfb, 0x01, 0xda, 0x22, 0x32, 0xfd, 0x6d, 0x11, 0xf5, 0xee, + 0xbd, 0x6e, 0x75, 0x8a, 0xec, 0xa5, 0xdd, 0x34, 0x61, 0x63, 0x73, 0xde, + 0x99, 0xd6, 0xb6, 0x6b, 0x73, 0xe6, 0xa2, 0xac, 0x2a, 0xfb, 0xbb, 0x7d, + 0xd5, 0xfb, 0x3f, 0xba, 0x8a, 0x72, 0x38, 0x39, 0x2d, 0x77, 0xac, 0x7a, + 0xf6, 0x56, 0x5a, 0x3a, 0xaa, 0xe4, 0x3a, 0xa7, 0xe4, 0xda, 0x92, 0xc3, + 0x29, 0xca, 0x9c, 0xbc, 0xf0, 0xbd, 0x40, 0x4f, 0x16, 0xf7, 0xfb, 0xf6, + 0x33, 0xf8, 0x0c, 0x7f, 0x57, 0x42, 0xd9, 0xb0, 0xee, 0xbe, 0x7f, 0x37, + 0xcf, 0x59, 0xf7, 0xad, 0x92, 0xcf, 0x1b, 0xb7, 0xf1, 0xf9, 0x14, 0x62, + 0xea, 0xd0, 0x90, 0xc7, 0xeb, 0xab, 0x4b, 0x1f, 0xce, 0xeb, 0x37, 0x37, + 0x79, 0x0d, 0x49, 0x43, 0xd5, 0xaf, 0x5d, 0xbd, 0xd2, 0x8d, 0xa8, 0x07, + 0x7b, 0xf8, 0x09, 0xf6, 0x9a, 0x12, 0xd2, 0xe0, 0xed, 0xb7, 0xe1, 0x92, + 0x96, 0x80, 0x76, 0xd2, 0x73, 0x9f, 0xaf, 0x2f, 0xee, 0x7f, 0x74, 0xc7, + 0x7b, 0x97, 0xc4, 0x70, 0x86, 0x31, 0xa6, 0x2b, 0x9d, 0x65, 0x7d, 0xff, + 0x9a, 0x16, 0x5d, 0xe9, 0xcc, 0xde, 0xd4, 0xd9, 0xeb, 0xd0, 0x59, 0x5d, + 0x7e, 0x13, 0xbc, 0xc0, 0x9f, 0x9f, 0x19, 0x31, 0x0e, 0x13, 0x5b, 0x18, + 0x5c, 0x0f, 0x31, 0xd4, 0xd7, 0x5d, 0xc7, 0x47, 0xd0, 0xdd, 0x9b, 0xa2, + 0xf4, 0x07, 0x7e, 0x90, 0x7f, 0xd4, 0xf3, 0x8c, 0x61, 0xe4, 0xa9, 0x43, + 0xf9, 0x3e, 0x69, 0x53, 0x67, 0xfc, 0x33, 0x9e, 0x3e, 0x95, 0x6f, 0xfb, + 0xfa, 0xcc, 0xcd, 0x50, 0x67, 0xe6, 0x6e, 0x4f, 0x7f, 0x9d, 0x6a, 0xce, + 0x62, 0x32, 0xa1, 0xfc, 0xda, 0x1a, 0xba, 0x65, 0x37, 0x75, 0xf8, 0xb4, + 0xeb, 0xfd, 0x2f, 0xbb, 0xd3, 0xb2, 0xe8, 0x7e, 0x98, 0x1e, 0x3d, 0x1d, + 0x4e, 0x88, 0xe7, 0x3f, 0x57, 0xeb, 0x4f, 0x5f, 0x0d, 0x2b, 0x5b, 0x9d, + 0x80, 0xec, 0x4e, 0x56, 0x3e, 0xe6, 0xdb, 0xb7, 0xc7, 0xeb, 0xd0, 0x87, + 0xf0, 0x7a, 0xb8, 0x3c, 0x68, 0xbc, 0x8d, 0xb5, 0x26, 0x15, 0x86, 0x8b, + 0x88, 0xe3, 0xf3, 0x9a, 0xd8, 0xe4, 0x35, 0xa0, 0xcd, 0x9b, 0x97, 0x65, + 0x5d, 0xea, 0x32, 0x3e, 0x3d, 0xaa, 0xde, 0xbf, 0x7f, 0xa3, 0xcc, 0xb8, + 0x0c, 0xcc, 0x13, 0xeb, 0x93, 0x4b, 0x8d, 0x84, 0x5c, 0x22, 0x96, 0x18, + 0xc3, 0x7f, 0xf7, 0x98, 0x9f, 0x9b, 0xa3, 0xf2, 0x66, 0xb9, 0xbd, 0x56, + 0x1c, 0x95, 0xd7, 0xcb, 0x41, 0xbd, 0x48, 0x2c, 0xcb, 0xfc, 0x3f, 0x27, + 0x6f, 0x2d, 0x0d, 0xca, 0xfa, 0x0c, 0xf2, 0xf8, 0x10, 0x65, 0x30, 0x62, + 0x7c, 0x46, 0xfd, 0xbe, 0xe2, 0x4a, 0xeb, 0xbc, 0x85, 0x75, 0x97, 0x5b, + 0x72, 0x84, 0xe7, 0xd0, 0xfc, 0xde, 0xf8, 0x04, 0x56, 0xe1, 0xbc, 0x3e, + 0xa9, 0x2d, 0xa3, 0x2e, 0x2f, 0x73, 0x5d, 0xca, 0x69, 0x5a, 0x7d, 0x9f, + 0xc4, 0x3e, 0xf7, 0xf3, 0xbd, 0xf4, 0x18, 0x75, 0x71, 0xa5, 0xb5, 0x61, + 0xf1, 0x1c, 0x72, 0x4e, 0x1a, 0xd0, 0xd7, 0x97, 0x93, 0x3c, 0x27, 0xcf, + 0x0b, 0x7f, 0x9f, 0x52, 0x6b, 0xcc, 0xa0, 0x16, 0xb8, 0xd2, 0x5a, 0xb0, + 0x9e, 0x52, 0x7a, 0x6a, 0x54, 0x1f, 0xf0, 0xc7, 0x79, 0xcd, 0x7b, 0x86, + 0xb3, 0x6f, 0x88, 0xf5, 0xe7, 0x03, 0xc8, 0xff, 0xac, 0x3d, 0x89, 0xb7, + 0x28, 0x8b, 0x04, 0x6a, 0x5c, 0xae, 0xc5, 0xdf, 0x04, 0x25, 0x87, 0xf3, + 0x32, 0x09, 0x7a, 0x80, 0xcb, 0x5c, 0xc6, 0xfd, 0x5b, 0x65, 0x23, 0xe6, + 0xc5, 0x77, 0xbe, 0xaf, 0xb5, 0x81, 0x98, 0xbf, 0xb1, 0x19, 0xf3, 0xfb, + 0x71, 0x6d, 0x38, 0xa9, 0xa1, 0xff, 0x84, 0xf5, 0xd9, 0x77, 0x61, 0xcc, + 0x1f, 0xc7, 0x7c, 0x8e, 0xf5, 0x49, 0x69, 0x59, 0x6c, 0xf6, 0x99, 0x6a, + 0xc2, 0x77, 0x31, 0x72, 0xb2, 0xd8, 0x18, 0x8c, 0x9f, 0xd7, 0x1c, 0xf5, + 0xce, 0x46, 0x72, 0x88, 0x7d, 0xb7, 0x3e, 0x69, 0x2c, 0x4b, 0x22, 0x94, + 0x7e, 0x48, 0xdc, 0x86, 0x87, 0xb9, 0x17, 0x34, 0xf6, 0xdf, 0x6c, 0x69, + 0x6c, 0x9f, 0x63, 0x84, 0xd2, 0x87, 0xe4, 0x0f, 0xfc, 0x39, 0x8e, 0x9a, + 0xf3, 0x1f, 0x76, 0xf3, 0xec, 0xab, 0xe1, 0xf6, 0x82, 0x06, 0xd2, 0x76, + 0x63, 0xfb, 0xbe, 0x89, 0xad, 0x7d, 0xb9, 0x27, 0x6a, 0x98, 0xbd, 0x36, + 0xf6, 0x7d, 0x15, 0xcf, 0x3c, 0x04, 0x3a, 0xae, 0x84, 0x74, 0xeb, 0x21, + 0x29, 0x36, 0xae, 0xde, 0xa3, 0x9d, 0x06, 0x3e, 0xc3, 0xf5, 0xb9, 0xcf, + 0x21, 0xd0, 0x77, 0x45, 0xd3, 0xad, 0x43, 0x90, 0xa5, 0xb7, 0x47, 0xe8, + 0x39, 0xd3, 0xf8, 0xa1, 0x0c, 0x89, 0xbe, 0xa2, 0x29, 0xf9, 0xeb, 0xb5, + 0x51, 0x38, 0xc4, 0x94, 0x74, 0xaf, 0xcd, 0x4a, 0x68, 0x8d, 0x3d, 0x00, + 0xda, 0x22, 0xf5, 0xb8, 0x0b, 0x7e, 0x2c, 0x76, 0xd8, 0x22, 0xde, 0x67, + 0x1f, 0x77, 0xb5, 0x57, 0x7a, 0x89, 0xf7, 0x59, 0x0f, 0x1c, 0xc4, 0x7f, + 0xd6, 0x04, 0x2f, 0xb5, 0x32, 0xa9, 0x77, 0x54, 0xde, 0xcc, 0x37, 0x78, + 0xdf, 0x4c, 0x88, 0xf0, 0x1e, 0xe3, 0x43, 0x9f, 0x44, 0xbe, 0x3e, 0x8c, + 0x98, 0x90, 0x03, 0x76, 0xc6, 0xba, 0xa7, 0x86, 0x24, 0xec, 0xbd, 0xeb, + 0xa0, 0xfa, 0x25, 0x6f, 0x2d, 0x9b, 0xfe, 0xef, 0x53, 0x64, 0xdf, 0xf9, + 0x14, 0x7b, 0x9a, 0x03, 0xb0, 0x53, 0xd6, 0x23, 0xa2, 0x6f, 0xa0, 0xde, + 0xbc, 0xd4, 0x88, 0xf6, 0xf2, 0x7d, 0xcb, 0xd7, 0x5d, 0x5c, 0x13, 0xbb, + 0xc7, 0x14, 0x56, 0xf4, 0xef, 0xf1, 0x3b, 0xea, 0xa0, 0x6d, 0x98, 0x32, + 0x01, 0x4c, 0xc9, 0x3a, 0x69, 0xca, 0x7f, 0xe7, 0xcd, 0x70, 0x4e, 0x6c, + 0xab, 0x95, 0x86, 0x65, 0x03, 0x38, 0x6b, 0xdd, 0xb5, 0x10, 0x07, 0xdf, + 0xd6, 0xea, 0x65, 0xf5, 0xbb, 0x34, 0xed, 0x01, 0x60, 0xac, 0x44, 0x9f, + 0xaa, 0x75, 0x4e, 0x3e, 0x20, 0x9e, 0xbd, 0xc3, 0xca, 0x54, 0xcc, 0x5a, + 0xaf, 0x7a, 0xb5, 0xc5, 0x46, 0x75, 0x4a, 0xfe, 0xd4, 0x5d, 0x50, 0xbd, + 0xd2, 0x25, 0xd4, 0x1b, 0xe1, 0x45, 0x55, 0x6b, 0xb5, 0xe1, 0x54, 0xc4, + 0xb7, 0x67, 0x8f, 0xc0, 0x07, 0x4d, 0xf5, 0x6e, 0x81, 0xbe, 0xd2, 0x6a, + 0x65, 0x11, 0x2f, 0x74, 0xcb, 0x32, 0x8a, 0xc8, 0x73, 0x59, 0xf5, 0x7e, + 0x0a, 0xfd, 0xf7, 0xf7, 0x54, 0x1c, 0x96, 0x1a, 0x64, 0xf3, 0x5c, 0x02, + 0xeb, 0x68, 0xca, 0x3e, 0x43, 0x4a, 0x0f, 0x0f, 0x28, 0xec, 0x1a, 0x5a, + 0x41, 0x80, 0x5a, 0x1b, 0x12, 0x59, 0x81, 0xbf, 0xc2, 0x77, 0xc3, 0x6b, + 0xd4, 0x01, 0x65, 0x3b, 0x2b, 0x11, 0xc8, 0x9e, 0x58, 0x22, 0xb4, 0x48, + 0x19, 0xc7, 0x61, 0x17, 0x5c, 0x07, 0x32, 0xe6, 0xbb, 0x2c, 0xcb, 0x1d, + 0xf2, 0x4c, 0xc3, 0xf4, 0xdf, 0x3d, 0x7f, 0x89, 0xef, 0xa3, 0xeb, 0x73, + 0x63, 0x03, 0xc4, 0x4f, 0x52, 0x6a, 0x00, 0x63, 0x9c, 0x66, 0x0d, 0xce, + 0x18, 0x50, 0x88, 0x47, 0x94, 0xaf, 0xb3, 0x06, 0xf6, 0x7c, 0x9f, 0xf8, + 0x3a, 0x62, 0x11, 0xdb, 0x8e, 0x62, 0x8f, 0x9d, 0xe4, 0xea, 0xd5, 0x9e, + 0x93, 0xa0, 0xf3, 0xfc, 0x92, 0x39, 0x55, 0x90, 0x14, 0xdf, 0x71, 0x9e, + 0xb1, 0xc1, 0xf7, 0x06, 0xe2, 0xe4, 0x42, 0x85, 0xef, 0x33, 0x17, 0xe1, + 0x59, 0x53, 0x72, 0xbe, 0xcc, 0x1a, 0xf0, 0x76, 0xe8, 0x8b, 0xd7, 0xc5, + 0xf1, 0x10, 0xfc, 0xff, 0xa2, 0xc1, 0xdf, 0x91, 0xf1, 0x77, 0x41, 0x66, + 0x2a, 0xa1, 0x1d, 0x84, 0x8e, 0x0b, 0x46, 0xc4, 0xb7, 0x03, 0xa7, 0x4c, + 0x8c, 0x35, 0x62, 0x9c, 0xc3, 0xf7, 0x97, 0xdd, 0xcb, 0x2d, 0xd6, 0x3f, + 0x17, 0x10, 0xe7, 0xa6, 0x92, 0x53, 0xb0, 0x9d, 0x42, 0xbc, 0x13, 0xb4, + 0xfe, 0x5d, 0xdc, 0xcb, 0xbb, 0xdc, 0xc7, 0x4c, 0x5d, 0x94, 0x22, 0x30, + 0xfd, 0x48, 0xe2, 0x65, 0xd9, 0x83, 0x3a, 0x55, 0x93, 0x37, 0x2d, 0x73, + 0x5c, 0x34, 0xb5, 0xde, 0xf0, 0x7d, 0xb0, 0xbd, 0x37, 0x10, 0xdf, 0x3a, + 0xfc, 0xda, 0x3d, 0x5b, 0x26, 0x16, 0x3a, 0xaa, 0xde, 0x05, 0xb8, 0x60, + 0xb1, 0x7f, 0xc7, 0xdf, 0x44, 0xfe, 0xa5, 0xda, 0x63, 0xeb, 0x8c, 0x8d, + 0xfd, 0x63, 0xd2, 0xe7, 0xf1, 0x78, 0xc0, 0xf2, 0x68, 0xe4, 0x3a, 0x91, + 0xb6, 0x75, 0xce, 0xfb, 0xeb, 0x9c, 0xf5, 0xd7, 0xa9, 0xf9, 0xeb, 0x5c, + 0xd8, 0x5c, 0xe7, 0x6e, 0xe8, 0xbf, 0xd5, 0x7a, 0x0a, 0xf8, 0x21, 0x93, + 0x6a, 0xb5, 0x1c, 0xd4, 0x59, 0xa5, 0xd1, 0x79, 0x75, 0x46, 0xaa, 0xa7, + 0xbf, 0x71, 0x6f, 0xc6, 0x2a, 0xc4, 0xc3, 0x0a, 0x7b, 0xa0, 0x92, 0x82, + 0x1d, 0x16, 0xc4, 0xc3, 0xdc, 0x3c, 0xb7, 0xf3, 0xce, 0xf5, 0xba, 0xa1, + 0xc3, 0x1c, 0x72, 0x86, 0x91, 0x39, 0x67, 0x49, 0x61, 0xdf, 0x6f, 0xea, + 0xb0, 0xf3, 0x5e, 0xe4, 0x87, 0x9f, 0xc0, 0x66, 0x8c, 0x4c, 0xbd, 0x91, + 0x43, 0xbd, 0xc3, 0xf9, 0x77, 0x40, 0x8f, 0x85, 0x4c, 0xad, 0x51, 0xc8, + 0x9c, 0xe5, 0x79, 0x0e, 0xe6, 0xd5, 0x1a, 0x3d, 0x90, 0x7b, 0x8f, 0xea, + 0x8b, 0xbc, 0x5c, 0x8e, 0x31, 0x06, 0xc1, 0xd6, 0x63, 0x18, 0x8b, 0xab, + 0xdf, 0x68, 0xd5, 0xdd, 0x65, 0xf8, 0x74, 0x02, 0xe3, 0xd5, 0xae, 0x49, + 0x85, 0x47, 0x2d, 0x59, 0x71, 0x7f, 0xa5, 0x15, 0xcb, 0x97, 0xb5, 0x52, + 0x79, 0x18, 0x73, 0x46, 0xf9, 0x5b, 0x9f, 0x3d, 0xc0, 0x49, 0x53, 0xd5, + 0x1d, 0x69, 0x4a, 0x80, 0x26, 0xbd, 0x8d, 0xa6, 0x04, 0xe8, 0x41, 0xcc, + 0x3c, 0xc5, 0xde, 0xf1, 0xa8, 0x9c, 0x28, 0xf3, 0x9d, 0x26, 0xfe, 0x46, + 0xd5, 0x90, 0x30, 0xb0, 0x65, 0xe4, 0x94, 0x19, 0x5f, 0x57, 0xbd, 0x1a, + 0x73, 0xb8, 0x2e, 0x23, 0xa9, 0xba, 0xa8, 0xfc, 0x92, 0x38, 0x81, 0x7c, + 0xf5, 0x86, 0xdb, 0x23, 0x6f, 0xfa, 0x7b, 0x5d, 0x14, 0x9e, 0x33, 0x6e, + 0xdf, 0xeb, 0xc9, 0x4a, 0x2a, 0xf3, 0x8a, 0x15, 0xf2, 0xf9, 0xea, 0xc3, + 0x5e, 0x7b, 0x30, 0x37, 0x95, 0x39, 0xdf, 0xd8, 0x69, 0xae, 0x83, 0xb9, + 0x91, 0xb6, 0xb9, 0x0e, 0xe6, 0xf5, 0x20, 0xef, 0xf5, 0x28, 0x9e, 0x4a, + 0xa0, 0xeb, 0x52, 0x99, 0x3c, 0xf1, 0x0c, 0x82, 0x7b, 0x1a, 0xc4, 0xc6, + 0x53, 0xe2, 0x9f, 0xd9, 0xf2, 0xf7, 0x7a, 0x57, 0xf5, 0x6b, 0x94, 0x0d, + 0x4c, 0x58, 0x3c, 0x9b, 0x99, 0xd1, 0xb2, 0xf5, 0x3c, 0x72, 0xd5, 0x8d, + 0xc4, 0x43, 0x29, 0x1b, 0xb9, 0x92, 0xe7, 0x3c, 0x8d, 0x72, 0x81, 0xef, + 0x3d, 0xc3, 0x2e, 0xde, 0x21, 0x5e, 0xbe, 0x31, 0xa4, 0xde, 0x43, 0x70, + 0xfc, 0x73, 0x20, 0x31, 0x32, 0x63, 0x7c, 0xf7, 0xe0, 0x6e, 0xa9, 0x2f, + 0x7f, 0x11, 0x63, 0x19, 0xe4, 0xc5, 0x43, 0x5a, 0xe6, 0xdc, 0x24, 0xae, + 0x1f, 0xc2, 0x35, 0xe2, 0xf0, 0x72, 0x0e, 0xf7, 0x1f, 0xc2, 0xf5, 0xbc, + 0x96, 0x6d, 0xe6, 0x70, 0xfd, 0x30, 0xae, 0x27, 0x48, 0x9b, 0xf3, 0x8a, + 0x35, 0xa5, 0xd9, 0x58, 0xcb, 0x3e, 0x37, 0x89, 0x4f, 0xfb, 0x7a, 0xbc, + 0x07, 0x3d, 0x95, 0x79, 0x3e, 0x96, 0x04, 0x4d, 0x0f, 0x6a, 0x4e, 0xbd, + 0x1b, 0x6b, 0x0c, 0xe1, 0x79, 0xda, 0x54, 0xfb, 0x39, 0xd4, 0x6d, 0xaa, + 0x67, 0x14, 0x4a, 0xa7, 0x81, 0x77, 0x1f, 0x41, 0xde, 0xd7, 0xc4, 0xb1, + 0x1e, 0x97, 0x62, 0x2a, 0x2d, 0x0b, 0xf5, 0x90, 0x64, 0x63, 0x05, 0x7c, + 0x2f, 0x48, 0x66, 0x1c, 0xf7, 0xeb, 0xb4, 0x05, 0xce, 0x2b, 0x49, 0xb1, + 0x4a, 0xfc, 0xce, 0x7e, 0xd1, 0x57, 0xc0, 0x37, 0xfb, 0x44, 0x79, 0xc8, + 0x20, 0x46, 0xfb, 0xdd, 0xa1, 0xa7, 0xe5, 0xbd, 0xd3, 0x8c, 0x7c, 0xac, + 0x65, 0xea, 0xfe, 0x59, 0x9d, 0xc5, 0xdf, 0x2b, 0xb1, 0x47, 0x25, 0xc5, + 0x50, 0x9a, 0x7d, 0x0e, 0xd5, 0x17, 0x4f, 0x79, 0x67, 0x7a, 0xed, 0xef, + 0x90, 0x04, 0xfe, 0xc2, 0x7d, 0xbf, 0x82, 0xe7, 0xbd, 0xbe, 0x54, 0xb6, + 0xf9, 0x41, 0x5d, 0xf0, 0x5d, 0xfd, 0x15, 0xe8, 0xe2, 0xfc, 0x87, 0xf6, + 0xb9, 0xd8, 0xe3, 0x9a, 0x47, 0x2c, 0x62, 0x7f, 0x2c, 0x90, 0xdf, 0xd5, + 0x34, 0x92, 0xbe, 0xc3, 0x58, 0x4b, 0x52, 0x8c, 0xb3, 0xb9, 0x58, 0x42, + 0xd5, 0xbe, 0x1b, 0x4b, 0xf2, 0xc4, 0x16, 0xbd, 0xa4, 0x95, 0x72, 0x78, + 0x04, 0xf5, 0x1a, 0x7f, 0xff, 0xf0, 0xb8, 0xe4, 0x53, 0xec, 0xd1, 0x84, + 0x90, 0x0b, 0x0b, 0xf8, 0xbe, 0x25, 0xb7, 0x92, 0x2f, 0xb7, 0x7c, 0xf5, + 0x5b, 0x4a, 0x77, 0x35, 0x8b, 0xfb, 0x05, 0xbd, 0x8b, 0x69, 0xa5, 0xb3, + 0x9a, 0x7a, 0xcf, 0x36, 0xe0, 0x3d, 0xe8, 0xbf, 0xed, 0x6c, 0x73, 0x93, + 0x16, 0x69, 0xfb, 0x38, 0xdf, 0x5b, 0x18, 0xb6, 0x85, 0xf4, 0x93, 0x0f, + 0xe6, 0xac, 0xe0, 0x5c, 0x34, 0xe0, 0x21, 0xe0, 0xf3, 0xa3, 0xca, 0x85, + 0x74, 0xee, 0x31, 0xa4, 0x7b, 0xca, 0x08, 0x59, 0xcc, 0x01, 0x9f, 0xf6, + 0xfb, 0xf8, 0xff, 0x37, 0xe5, 0xea, 0xf1, 0x1e, 0x86, 0xa8, 0xfc, 0xdf, + 0x8b, 0xee, 0xa0, 0xf7, 0xab, 0xcf, 0x80, 0x0d, 0xe7, 0xac, 0xb5, 0xc5, + 0x67, 0x6d, 0x07, 0x3e, 0x6b, 0x3e, 0x9f, 0x1f, 0x7e, 0x4e, 0xea, 0xd1, + 0x59, 0x5b, 0xb2, 0xc1, 0x23, 0x6d, 0x6a, 0x27, 0x7b, 0xe3, 0x6f, 0x9c, + 0xd4, 0xef, 0xad, 0xa2, 0xb6, 0x7b, 0xad, 0x5e, 0x27, 0xeb, 0x64, 0xcf, + 0xee, 0xce, 0x22, 0xd7, 0x55, 0xab, 0x5e, 0xcd, 0x5c, 0x75, 0xd9, 0x6b, + 0xde, 0x69, 0x6f, 0x0d, 0x34, 0xff, 0x8e, 0x7a, 0xef, 0xa4, 0xe4, 0x7a, + 0x7d, 0xa9, 0x6a, 0xb5, 0x3d, 0x57, 0xde, 0xc0, 0x3c, 0x39, 0x5c, 0x90, + 0x19, 0xe8, 0x31, 0x89, 0xeb, 0x9b, 0xe5, 0xe5, 0x65, 0x75, 0x86, 0xe4, + 0x9f, 0xd5, 0xf0, 0x0c, 0x46, 0x9d, 0x43, 0x23, 0x5e, 0xcd, 0xaa, 0x78, + 0xbd, 0xb1, 0xac, 0xee, 0xa9, 0xdf, 0x3c, 0xd4, 0xdd, 0x19, 0xc4, 0x73, + 0xd4, 0x06, 0xd6, 0x6e, 0x29, 0xa2, 0x86, 0x3e, 0x6b, 0xcd, 0x18, 0xc4, + 0x29, 0x5c, 0x6b, 0x03, 0x6b, 0x9d, 0x5f, 0x96, 0xbd, 0x7c, 0xa7, 0xa3, + 0xaa, 0xce, 0xbd, 0xbc, 0x7e, 0xf5, 0xbc, 0x04, 0xbf, 0xd7, 0x8d, 0xfa, + 0x39, 0x8e, 0xef, 0x95, 0xf0, 0xb7, 0xa7, 0x8c, 0x01, 0xa8, 0x6b, 0x66, + 0x0a, 0x58, 0xaf, 0xd5, 0xf2, 0xfa, 0xd9, 0x2d, 0xd8, 0x7d, 0x84, 0xbf, + 0x65, 0xc0, 0xdf, 0x23, 0xb0, 0x13, 0xf8, 0xc1, 0xe6, 0x38, 0xaf, 0x59, + 0x4b, 0x04, 0xd7, 0x4c, 0x58, 0xff, 0x1b, 0xed, 0xcc, 0xfa, 0xa1, 0x98, + 0x41, 0x00, 0x00, 0x00 }; +static u32 bnx2_TXP_b09FwData[(0xd0/4) + 1] = { + 0x00000000, 0x00000014, 0x00000014, 0x00000014, 0x00000014, 0x00000010, + 0x00000030, 0x00000030, 0x00000000, 0x00000000, 0x00000000, 0x00000010, + 0x00008000, 0x00000000, 0x00000000, 0x00000000, 0x00008002, 0x00000000, + 0x00000000, 0x00000000, 0x00000003, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000005, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000004, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000006, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000001, 0x00000000, + 0x00000001, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 }; +static u32 bnx2_TXP_b09FwRodata[(0x30/4) + 1] = { + 0x08003be8, 0x08003c14, 0x08003c5c, 0x08003c5c, 0x08003ae8, 0x08003b14, + 0x08003b14, 0x08003c5c, 0x08003c5c, 0x08003c5c, 0x08003b7c, 0x00000000, + 0x00000000 }; +static u32 bnx2_TXP_b09FwBss[(0xa20/4) + 1] = { 0x0 }; +static u32 bnx2_TXP_b09FwSbss[(0x80/4) + 1] = { 0x0 }; + +static struct fw_info bnx2_txp_fw_09 = { + .ver_major = 0x1, + .ver_minor = 0x0, + .ver_fix = 0x0, + + .start_addr = 0x08000060, + + .text_addr = 0x08000000, + .text_len = 0x4194, + .text_index = 0x0, + .gz_text = bnx2_TXP_b09FwText, + .gz_text_len = sizeof(bnx2_TXP_b09FwText), + + .data_addr = 0x080041e0, + .data_len = 0xd0, + .data_index = 0x0, + .data = bnx2_TXP_b09FwData, + + .sbss_addr = 0x080042b0, + .sbss_len = 0x80, + .sbss_index = 0x0, + .sbss = bnx2_TXP_b09FwSbss, + + .bss_addr = 0x08004330, + .bss_len = 0xa20, + .bss_index = 0x0, + .bss = bnx2_TXP_b09FwBss, + + .rodata_addr = 0x08004198, + .rodata_len = 0x30, + .rodata_index = 0x0, + .rodata = bnx2_TXP_b09FwRodata, +}; + diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 17a461152d3..488d8ed9e74 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -1336,6 +1336,13 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev) goto err_undo_flags; } + if (slave_dev->get_stats == NULL) { + printk(KERN_NOTICE DRV_NAME + ": %s: the driver for slave device %s does not provide " + "get_stats function, network statistics will be " + "inaccurate.\n", bond_dev->name, slave_dev->name); + } + new_slave = kmalloc(sizeof(struct slave), GFP_KERNEL); if (!new_slave) { res = -ENOMEM; @@ -3605,33 +3612,35 @@ static struct net_device_stats *bond_get_stats(struct net_device *bond_dev) read_lock_bh(&bond->lock); bond_for_each_slave(bond, slave, i) { - sstats = slave->dev->get_stats(slave->dev); - - stats->rx_packets += sstats->rx_packets; - stats->rx_bytes += sstats->rx_bytes; - stats->rx_errors += sstats->rx_errors; - stats->rx_dropped += sstats->rx_dropped; - - stats->tx_packets += sstats->tx_packets; - stats->tx_bytes += sstats->tx_bytes; - stats->tx_errors += sstats->tx_errors; - stats->tx_dropped += sstats->tx_dropped; - - stats->multicast += sstats->multicast; - stats->collisions += sstats->collisions; - - stats->rx_length_errors += sstats->rx_length_errors; - stats->rx_over_errors += sstats->rx_over_errors; - stats->rx_crc_errors += sstats->rx_crc_errors; - stats->rx_frame_errors += sstats->rx_frame_errors; - stats->rx_fifo_errors += sstats->rx_fifo_errors; - stats->rx_missed_errors += sstats->rx_missed_errors; - - stats->tx_aborted_errors += sstats->tx_aborted_errors; - stats->tx_carrier_errors += sstats->tx_carrier_errors; - stats->tx_fifo_errors += sstats->tx_fifo_errors; - stats->tx_heartbeat_errors += sstats->tx_heartbeat_errors; - stats->tx_window_errors += sstats->tx_window_errors; + if (slave->dev->get_stats) { + sstats = slave->dev->get_stats(slave->dev); + + stats->rx_packets += sstats->rx_packets; + stats->rx_bytes += sstats->rx_bytes; + stats->rx_errors += sstats->rx_errors; + stats->rx_dropped += sstats->rx_dropped; + + stats->tx_packets += sstats->tx_packets; + stats->tx_bytes += sstats->tx_bytes; + stats->tx_errors += sstats->tx_errors; + stats->tx_dropped += sstats->tx_dropped; + + stats->multicast += sstats->multicast; + stats->collisions += sstats->collisions; + + stats->rx_length_errors += sstats->rx_length_errors; + stats->rx_over_errors += sstats->rx_over_errors; + stats->rx_crc_errors += sstats->rx_crc_errors; + stats->rx_frame_errors += sstats->rx_frame_errors; + stats->rx_fifo_errors += sstats->rx_fifo_errors; + stats->rx_missed_errors += sstats->rx_missed_errors; + + stats->tx_aborted_errors += sstats->tx_aborted_errors; + stats->tx_carrier_errors += sstats->tx_carrier_errors; + stats->tx_fifo_errors += sstats->tx_fifo_errors; + stats->tx_heartbeat_errors += sstats->tx_heartbeat_errors; + stats->tx_window_errors += sstats->tx_window_errors; + } } read_unlock_bh(&bond->lock); diff --git a/drivers/net/cassini.c b/drivers/net/cassini.c index fe08f384549..c8126484c2b 100644 --- a/drivers/net/cassini.c +++ b/drivers/net/cassini.c @@ -2825,7 +2825,7 @@ static inline int cas_xmit_tx_ringN(struct cas *cp, int ring, u64 csum_start_off, csum_stuff_off; csum_start_off = (u64) (skb->h.raw - skb->data); - csum_stuff_off = (u64) ((skb->h.raw + skb->csum) - skb->data); + csum_stuff_off = csum_start_off + skb->csum_offset; ctrl = TX_DESC_CSUM_EN | CAS_BASE(TX_DESC_CSUM_START, csum_start_off) | diff --git a/drivers/net/chelsio/Makefile b/drivers/net/chelsio/Makefile index 54c78d94f48..382d23f810a 100644 --- a/drivers/net/chelsio/Makefile +++ b/drivers/net/chelsio/Makefile @@ -1,11 +1,11 @@ # -# Chelsio 10Gb NIC driver for Linux. +# Chelsio T1 driver # obj-$(CONFIG_CHELSIO_T1) += cxgb.o -EXTRA_CFLAGS += -Idrivers/net/chelsio $(DEBUG_FLAGS) +cxgb-$(CONFIG_CHELSIO_T1_1G) += ixf1010.o mac.o mv88e1xxx.o vsc7326.o vsc8244.o +cxgb-objs := cxgb2.o espi.o tp.o pm3393.o sge.o subr.o \ + mv88x201x.o my3126.o $(cxgb-y) -cxgb-objs := cxgb2.o espi.o pm3393.o sge.o subr.o mv88x201x.o - diff --git a/drivers/net/chelsio/common.h b/drivers/net/chelsio/common.h index 8b1bedbce0d..74758d2c7af 100644 --- a/drivers/net/chelsio/common.h +++ b/drivers/net/chelsio/common.h @@ -45,6 +45,7 @@ #include <linux/delay.h> #include <linux/pci.h> #include <linux/ethtool.h> +#include <linux/if_vlan.h> #include <linux/mii.h> #include <linux/crc32.h> #include <linux/init.h> @@ -53,13 +54,30 @@ #define DRV_DESCRIPTION "Chelsio 10Gb Ethernet Driver" #define DRV_NAME "cxgb" -#define DRV_VERSION "2.1.1" +#define DRV_VERSION "2.2" #define PFX DRV_NAME ": " #define CH_ERR(fmt, ...) printk(KERN_ERR PFX fmt, ## __VA_ARGS__) #define CH_WARN(fmt, ...) printk(KERN_WARNING PFX fmt, ## __VA_ARGS__) #define CH_ALERT(fmt, ...) printk(KERN_ALERT PFX fmt, ## __VA_ARGS__) +/* + * More powerful macro that selectively prints messages based on msg_enable. + * For info and debugging messages. + */ +#define CH_MSG(adapter, level, category, fmt, ...) do { \ + if ((adapter)->msg_enable & NETIF_MSG_##category) \ + printk(KERN_##level PFX "%s: " fmt, (adapter)->name, \ + ## __VA_ARGS__); \ +} while (0) + +#ifdef DEBUG +# define CH_DBG(adapter, category, fmt, ...) \ + CH_MSG(adapter, DEBUG, category, fmt, ## __VA_ARGS__) +#else +# define CH_DBG(fmt, ...) +#endif + #define CH_DEVICE(devid, ssid, idx) \ { PCI_VENDOR_ID_CHELSIO, devid, PCI_ANY_ID, ssid, 0, 0, idx } @@ -71,10 +89,6 @@ typedef struct adapter adapter_t; -void t1_elmer0_ext_intr(adapter_t *adapter); -void t1_link_changed(adapter_t *adapter, int port_id, int link_status, - int speed, int duplex, int fc); - struct t1_rx_mode { struct net_device *dev; u32 idx; @@ -97,26 +111,53 @@ static inline u8 *t1_get_next_mcaddr(struct t1_rx_mode *rm) } #define MAX_NPORTS 4 +#define PORT_MASK ((1 << MAX_NPORTS) - 1) +#define NMTUS 8 +#define TCB_SIZE 128 #define SPEED_INVALID 0xffff #define DUPLEX_INVALID 0xff enum { CHBT_BOARD_N110, - CHBT_BOARD_N210 + CHBT_BOARD_N210, + CHBT_BOARD_7500, + CHBT_BOARD_8000, + CHBT_BOARD_CHT101, + CHBT_BOARD_CHT110, + CHBT_BOARD_CHT210, + CHBT_BOARD_CHT204, + CHBT_BOARD_CHT204V, + CHBT_BOARD_CHT204E, + CHBT_BOARD_CHN204, + CHBT_BOARD_COUGAR, + CHBT_BOARD_6800, + CHBT_BOARD_SIMUL, }; enum { + CHBT_TERM_FPGA, CHBT_TERM_T1, - CHBT_TERM_T2 + CHBT_TERM_T2, + CHBT_TERM_T3 }; enum { + CHBT_MAC_CHELSIO_A, + CHBT_MAC_IXF1010, CHBT_MAC_PM3393, + CHBT_MAC_VSC7321, + CHBT_MAC_DUMMY }; enum { + CHBT_PHY_88E1041, + CHBT_PHY_88E1111, CHBT_PHY_88X2010, + CHBT_PHY_XPAK, + CHBT_PHY_MY3126, + CHBT_PHY_8244, + CHBT_PHY_DUMMY }; enum { @@ -150,16 +191,44 @@ struct chelsio_pci_params { unsigned char is_pcix; }; +struct tp_params { + unsigned int pm_size; + unsigned int cm_size; + unsigned int pm_rx_base; + unsigned int pm_tx_base; + unsigned int pm_rx_pg_size; + unsigned int pm_tx_pg_size; + unsigned int pm_rx_num_pgs; + unsigned int pm_tx_num_pgs; + unsigned int rx_coalescing_size; + unsigned int use_5tuple_mode; +}; + +struct mc5_params { + unsigned int mode; /* selects MC5 width */ + unsigned int nservers; /* size of server region */ + unsigned int nroutes; /* size of routing region */ +}; + +/* Default MC5 region sizes */ +#define DEFAULT_SERVER_REGION_LEN 256 +#define DEFAULT_RT_REGION_LEN 1024 + struct adapter_params { struct sge_params sge; + struct mc5_params mc5; + struct tp_params tp; struct chelsio_pci_params pci; const struct board_info *brd_info; + unsigned short mtus[NMTUS]; unsigned int nports; /* # of ethernet ports */ unsigned int stats_update_period; unsigned short chip_revision; unsigned char chip_version; + unsigned char is_asic; + unsigned char has_msi; }; struct link_config { @@ -207,17 +276,20 @@ struct adapter { /* Terminator modules. */ struct sge *sge; struct peespi *espi; + struct petp *tp; struct port_info port[MAX_NPORTS]; struct delayed_work stats_update_task; struct timer_list stats_update_timer; - struct semaphore mib_mutex; spinlock_t tpi_lock; spinlock_t work_lock; + spinlock_t mac_lock; + /* guards async operations */ spinlock_t async_lock ____cacheline_aligned; u32 slow_intr_mask; + int t1powersave; }; enum { /* adapter flags */ @@ -256,6 +328,11 @@ struct board_info { const char *desc; }; +static inline int t1_is_asic(const adapter_t *adapter) +{ + return adapter->params.is_asic; +} + extern struct pci_device_id t1_pci_tbl[]; static inline int adapter_matches_type(const adapter_t *adapter, @@ -285,13 +362,15 @@ static inline unsigned int core_ticks_per_usec(const adapter_t *adap) return board_info(adap)->clock_core / 1000000; } +extern int __t1_tpi_read(adapter_t *adapter, u32 addr, u32 *valp); +extern int __t1_tpi_write(adapter_t *adapter, u32 addr, u32 value); extern int t1_tpi_write(adapter_t *adapter, u32 addr, u32 value); extern int t1_tpi_read(adapter_t *adapter, u32 addr, u32 *value); extern void t1_interrupts_enable(adapter_t *adapter); extern void t1_interrupts_disable(adapter_t *adapter); extern void t1_interrupts_clear(adapter_t *adapter); -extern int elmer0_ext_intr_handler(adapter_t *adapter); +extern int t1_elmer0_ext_intr_handler(adapter_t *adapter); extern int t1_slow_intr_handler(adapter_t *adapter); extern int t1_link_start(struct cphy *phy, struct cmac *mac, struct link_config *lc); @@ -305,9 +384,7 @@ extern int t1_init_hw_modules(adapter_t *adapter); extern int t1_init_sw_modules(adapter_t *adapter, const struct board_info *bi); extern void t1_free_sw_modules(adapter_t *adapter); extern void t1_fatal_err(adapter_t *adapter); - -extern void t1_tp_set_udp_checksum_offload(adapter_t *adapter, int enable); -extern void t1_tp_set_tcp_checksum_offload(adapter_t *adapter, int enable); -extern void t1_tp_set_ip_checksum_offload(adapter_t *adapter, int enable); - +extern void t1_link_changed(adapter_t *adapter, int port_id); +extern void t1_link_negotiated(adapter_t *adapter, int port_id, int link_stat, + int speed, int duplex, int pause); #endif /* _CXGB_COMMON_H_ */ diff --git a/drivers/net/chelsio/cphy.h b/drivers/net/chelsio/cphy.h index 3412342f734..60901f25014 100644 --- a/drivers/net/chelsio/cphy.h +++ b/drivers/net/chelsio/cphy.h @@ -52,7 +52,14 @@ struct mdio_ops { /* PHY interrupt types */ enum { cphy_cause_link_change = 0x1, - cphy_cause_error = 0x2 + cphy_cause_error = 0x2, + cphy_cause_fifo_error = 0x3 +}; + +enum { + PHY_LINK_UP = 0x1, + PHY_AUTONEG_RDY = 0x2, + PHY_AUTONEG_EN = 0x4 }; struct cphy; @@ -81,7 +88,18 @@ struct cphy_ops { /* A PHY instance */ struct cphy { int addr; /* PHY address */ + int state; /* Link status state machine */ adapter_t *adapter; /* associated adapter */ + + struct work_struct phy_update; + + u16 bmsr; + int count; + int act_count; + int act_on; + + u32 elmer_gpo; + struct cphy_ops *ops; /* PHY operations */ int (*mdio_read)(adapter_t *adapter, int phy_addr, int mmd_addr, int reg_addr, unsigned int *val); @@ -142,6 +160,10 @@ struct gphy { int (*reset)(adapter_t *adapter); }; +extern struct gphy t1_my3126_ops; +extern struct gphy t1_mv88e1xxx_ops; +extern struct gphy t1_vsc8244_ops; +extern struct gphy t1_xpak_ops; extern struct gphy t1_mv88x201x_ops; extern struct gphy t1_dummy_phy_ops; diff --git a/drivers/net/chelsio/cpl5_cmd.h b/drivers/net/chelsio/cpl5_cmd.h index 5b357d9e88d..35f565be4fd 100644 --- a/drivers/net/chelsio/cpl5_cmd.h +++ b/drivers/net/chelsio/cpl5_cmd.h @@ -46,24 +46,385 @@ #endif enum CPL_opcode { + CPL_PASS_OPEN_REQ = 0x1, + CPL_PASS_OPEN_RPL = 0x2, + CPL_PASS_ESTABLISH = 0x3, + CPL_PASS_ACCEPT_REQ = 0xE, + CPL_PASS_ACCEPT_RPL = 0x4, + CPL_ACT_OPEN_REQ = 0x5, + CPL_ACT_OPEN_RPL = 0x6, + CPL_CLOSE_CON_REQ = 0x7, + CPL_CLOSE_CON_RPL = 0x8, + CPL_CLOSE_LISTSRV_REQ = 0x9, + CPL_CLOSE_LISTSRV_RPL = 0xA, + CPL_ABORT_REQ = 0xB, + CPL_ABORT_RPL = 0xC, + CPL_PEER_CLOSE = 0xD, + CPL_ACT_ESTABLISH = 0x17, + + CPL_GET_TCB = 0x24, + CPL_GET_TCB_RPL = 0x25, + CPL_SET_TCB = 0x26, + CPL_SET_TCB_FIELD = 0x27, + CPL_SET_TCB_RPL = 0x28, + CPL_PCMD = 0x29, + + CPL_PCMD_READ = 0x31, + CPL_PCMD_READ_RPL = 0x32, + + + CPL_RX_DATA = 0xA0, + CPL_RX_DATA_DDP = 0xA1, + CPL_RX_DATA_ACK = 0xA3, CPL_RX_PKT = 0xAD, + CPL_RX_ISCSI_HDR = 0xAF, + CPL_TX_DATA_ACK = 0xB0, + CPL_TX_DATA = 0xB1, CPL_TX_PKT = 0xB2, CPL_TX_PKT_LSO = 0xB6, + + CPL_RTE_DELETE_REQ = 0xC0, + CPL_RTE_DELETE_RPL = 0xC1, + CPL_RTE_WRITE_REQ = 0xC2, + CPL_RTE_WRITE_RPL = 0xD3, + CPL_RTE_READ_REQ = 0xC3, + CPL_RTE_READ_RPL = 0xC4, + CPL_L2T_WRITE_REQ = 0xC5, + CPL_L2T_WRITE_RPL = 0xD4, + CPL_L2T_READ_REQ = 0xC6, + CPL_L2T_READ_RPL = 0xC7, + CPL_SMT_WRITE_REQ = 0xC8, + CPL_SMT_WRITE_RPL = 0xD5, + CPL_SMT_READ_REQ = 0xC9, + CPL_SMT_READ_RPL = 0xCA, + CPL_ARP_MISS_REQ = 0xCD, + CPL_ARP_MISS_RPL = 0xCE, + CPL_MIGRATE_C2T_REQ = 0xDC, + CPL_MIGRATE_C2T_RPL = 0xDD, + CPL_ERROR = 0xD7, + + /* internal: driver -> TOM */ + CPL_MSS_CHANGE = 0xE1 }; -enum { /* TX_PKT_LSO ethernet types */ +#define NUM_CPL_CMDS 256 + +enum CPL_error { + CPL_ERR_NONE = 0, + CPL_ERR_TCAM_PARITY = 1, + CPL_ERR_TCAM_FULL = 3, + CPL_ERR_CONN_RESET = 20, + CPL_ERR_CONN_EXIST = 22, + CPL_ERR_ARP_MISS = 23, + CPL_ERR_BAD_SYN = 24, + CPL_ERR_CONN_TIMEDOUT = 30, + CPL_ERR_XMIT_TIMEDOUT = 31, + CPL_ERR_PERSIST_TIMEDOUT = 32, + CPL_ERR_FINWAIT2_TIMEDOUT = 33, + CPL_ERR_KEEPALIVE_TIMEDOUT = 34, + CPL_ERR_ABORT_FAILED = 42, + CPL_ERR_GENERAL = 99 +}; + +enum { + CPL_CONN_POLICY_AUTO = 0, + CPL_CONN_POLICY_ASK = 1, + CPL_CONN_POLICY_DENY = 3 +}; + +enum { + ULP_MODE_NONE = 0, + ULP_MODE_TCPDDP = 1, + ULP_MODE_ISCSI = 2, + ULP_MODE_IWARP = 3, + ULP_MODE_SSL = 4 +}; + +enum { + CPL_PASS_OPEN_ACCEPT, + CPL_PASS_OPEN_REJECT +}; + +enum { + CPL_ABORT_SEND_RST = 0, + CPL_ABORT_NO_RST, + CPL_ABORT_POST_CLOSE_REQ = 2 +}; + +enum { // TX_PKT_LSO ethernet types CPL_ETH_II, CPL_ETH_II_VLAN, CPL_ETH_802_3, CPL_ETH_802_3_VLAN }; -struct cpl_rx_data { +union opcode_tid { + u32 opcode_tid; + u8 opcode; +}; + +#define S_OPCODE 24 +#define V_OPCODE(x) ((x) << S_OPCODE) +#define G_OPCODE(x) (((x) >> S_OPCODE) & 0xFF) +#define G_TID(x) ((x) & 0xFFFFFF) + +/* tid is assumed to be 24-bits */ +#define MK_OPCODE_TID(opcode, tid) (V_OPCODE(opcode) | (tid)) + +#define OPCODE_TID(cmd) ((cmd)->ot.opcode_tid) + +/* extract the TID from a CPL command */ +#define GET_TID(cmd) (G_TID(ntohl(OPCODE_TID(cmd)))) + +struct tcp_options { + u16 mss; + u8 wsf; +#if defined(__LITTLE_ENDIAN_BITFIELD) + u8 rsvd:4; + u8 ecn:1; + u8 sack:1; + u8 tstamp:1; +#else + u8 tstamp:1; + u8 sack:1; + u8 ecn:1; + u8 rsvd:4; +#endif +}; + +struct cpl_pass_open_req { + union opcode_tid ot; + u16 local_port; + u16 peer_port; + u32 local_ip; + u32 peer_ip; + u32 opt0h; + u32 opt0l; + u32 peer_netmask; + u32 opt1; +}; + +struct cpl_pass_open_rpl { + union opcode_tid ot; + u16 local_port; + u16 peer_port; + u32 local_ip; + u32 peer_ip; + u8 resvd[7]; + u8 status; +}; + +struct cpl_pass_establish { + union opcode_tid ot; + u16 local_port; + u16 peer_port; + u32 local_ip; + u32 peer_ip; + u32 tos_tid; + u8 l2t_idx; + u8 rsvd[3]; + u32 snd_isn; + u32 rcv_isn; +}; + +struct cpl_pass_accept_req { + union opcode_tid ot; + u16 local_port; + u16 peer_port; + u32 local_ip; + u32 peer_ip; + u32 tos_tid; + struct tcp_options tcp_options; + u8 dst_mac[6]; + u16 vlan_tag; + u8 src_mac[6]; + u8 rsvd[2]; + u32 rcv_isn; + u32 unknown_tcp_options; +}; + +struct cpl_pass_accept_rpl { + union opcode_tid ot; + u32 rsvd0; + u32 rsvd1; + u32 peer_ip; + u32 opt0h; + union { + u32 opt0l; + struct { + u8 rsvd[3]; + u8 status; + }; + }; +}; + +struct cpl_act_open_req { + union opcode_tid ot; + u16 local_port; + u16 peer_port; + u32 local_ip; + u32 peer_ip; + u32 opt0h; + u32 opt0l; + u32 iff_vlantag; + u32 rsvd; +}; + +struct cpl_act_open_rpl { + union opcode_tid ot; + u16 local_port; + u16 peer_port; + u32 local_ip; + u32 peer_ip; + u32 new_tid; + u8 rsvd[3]; + u8 status; +}; + +struct cpl_act_establish { + union opcode_tid ot; + u16 local_port; + u16 peer_port; + u32 local_ip; + u32 peer_ip; + u32 tos_tid; + u32 rsvd; + u32 snd_isn; + u32 rcv_isn; +}; + +struct cpl_get_tcb { + union opcode_tid ot; + u32 rsvd; +}; + +struct cpl_get_tcb_rpl { + union opcode_tid ot; + u16 len; + u8 rsvd; + u8 status; +}; + +struct cpl_set_tcb { + union opcode_tid ot; + u16 len; + u16 rsvd; +}; + +struct cpl_set_tcb_field { + union opcode_tid ot; + u8 rsvd[3]; + u8 offset; + u32 mask; + u32 val; +}; + +struct cpl_set_tcb_rpl { + union opcode_tid ot; + u8 rsvd[3]; + u8 status; +}; + +struct cpl_pcmd { + union opcode_tid ot; + u16 dlen_in; + u16 dlen_out; + u32 pcmd_parm[2]; +}; + +struct cpl_pcmd_read { + union opcode_tid ot; + u32 rsvd1; + u16 rsvd2; + u32 addr; + u16 len; +}; + +struct cpl_pcmd_read_rpl { + union opcode_tid ot; + u16 len; +}; + +struct cpl_close_con_req { + union opcode_tid ot; + u32 rsvd; +}; + +struct cpl_close_con_rpl { + union opcode_tid ot; + u8 rsvd[3]; + u8 status; + u32 snd_nxt; + u32 rcv_nxt; +}; + +struct cpl_close_listserv_req { + union opcode_tid ot; + u32 rsvd; +}; + +struct cpl_close_listserv_rpl { + union opcode_tid ot; + u8 rsvd[3]; + u8 status; +}; + +struct cpl_abort_req { + union opcode_tid ot; u32 rsvd0; + u8 rsvd1; + u8 cmd; + u8 rsvd2[6]; +}; + +struct cpl_abort_rpl { + union opcode_tid ot; + u32 rsvd0; + u8 rsvd1; + u8 status; + u8 rsvd2[6]; +}; + +struct cpl_peer_close { + union opcode_tid ot; + u32 rsvd; +}; + +struct cpl_tx_data { + union opcode_tid ot; + u32 len; + u32 rsvd0; + u16 urg; + u16 flags; +}; + +struct cpl_tx_data_ack { + union opcode_tid ot; + u32 ack_seq; +}; + +struct cpl_rx_data { + union opcode_tid ot; u32 len; u32 seq; u16 urg; - u8 rsvd1; + u8 rsvd; + u8 status; +}; + +struct cpl_rx_data_ack { + union opcode_tid ot; + u32 credit; +}; + +struct cpl_rx_data_ddp { + union opcode_tid ot; + u32 len; + u32 seq; + u32 nxt_seq; + u32 ulp_crc; + u16 ddp_status; + u8 rsvd; u8 status; }; @@ -99,9 +460,9 @@ struct cpl_tx_pkt_lso { u8 ip_csum_dis:1; u8 l4_csum_dis:1; u8 vlan_valid:1; - u8 rsvd:1; + u8 :1; #else - u8 rsvd:1; + u8 :1; u8 vlan_valid:1; u8 l4_csum_dis:1; u8 ip_csum_dis:1; @@ -110,8 +471,7 @@ struct cpl_tx_pkt_lso { u16 vlan; __be32 len; - u32 rsvd2; - u8 rsvd3; + u8 rsvd[5]; #if defined(__LITTLE_ENDIAN_BITFIELD) u8 tcp_hdr_words:4; u8 ip_hdr_words:4; @@ -138,8 +498,142 @@ struct cpl_rx_pkt { u8 iff:4; #endif u16 csum; - __be16 vlan; + u16 vlan; u16 len; }; +struct cpl_l2t_write_req { + union opcode_tid ot; + u32 params; + u8 rsvd1[2]; + u8 dst_mac[6]; +}; + +struct cpl_l2t_write_rpl { + union opcode_tid ot; + u8 status; + u8 rsvd[3]; +}; + +struct cpl_l2t_read_req { + union opcode_tid ot; + u8 rsvd[3]; + u8 l2t_idx; +}; + +struct cpl_l2t_read_rpl { + union opcode_tid ot; + u32 params; + u8 rsvd1[2]; + u8 dst_mac[6]; +}; + +struct cpl_smt_write_req { + union opcode_tid ot; + u8 rsvd0; +#if defined(__LITTLE_ENDIAN_BITFIELD) + u8 rsvd1:1; + u8 mtu_idx:3; + u8 iff:4; +#else + u8 iff:4; + u8 mtu_idx:3; + u8 rsvd1:1; +#endif + u16 rsvd2; + u16 rsvd3; + u8 src_mac1[6]; + u16 rsvd4; + u8 src_mac0[6]; +}; + +struct cpl_smt_write_rpl { + union opcode_tid ot; + u8 status; + u8 rsvd[3]; +}; + +struct cpl_smt_read_req { + union opcode_tid ot; + u8 rsvd0; +#if defined(__LITTLE_ENDIAN_BITFIELD) + u8 rsvd1:4; + u8 iff:4; +#else + u8 iff:4; + u8 rsvd1:4; +#endif + u16 rsvd2; +}; + +struct cpl_smt_read_rpl { + union opcode_tid ot; + u8 status; +#if defined(__LITTLE_ENDIAN_BITFIELD) + u8 rsvd1:1; + u8 mtu_idx:3; + u8 rsvd0:4; +#else + u8 rsvd0:4; + u8 mtu_idx:3; + u8 rsvd1:1; +#endif + u16 rsvd2; + u16 rsvd3; + u8 src_mac1[6]; + u16 rsvd4; + u8 src_mac0[6]; +}; + +struct cpl_rte_delete_req { + union opcode_tid ot; + u32 params; +}; + +struct cpl_rte_delete_rpl { + union opcode_tid ot; + u8 status; + u8 rsvd[3]; +}; + +struct cpl_rte_write_req { + union opcode_tid ot; + u32 params; + u32 netmask; + u32 faddr; +}; + +struct cpl_rte_write_rpl { + union opcode_tid ot; + u8 status; + u8 rsvd[3]; +}; + +struct cpl_rte_read_req { + union opcode_tid ot; + u32 params; +}; + +struct cpl_rte_read_rpl { + union opcode_tid ot; + u8 status; + u8 rsvd0[2]; + u8 l2t_idx; +#if defined(__LITTLE_ENDIAN_BITFIELD) + u8 rsvd1:7; + u8 select:1; +#else + u8 select:1; + u8 rsvd1:7; +#endif + u8 rsvd2[3]; + u32 addr; +}; + +struct cpl_mss_change { + union opcode_tid ot; + u32 mss; +}; + #endif /* _CXGB_CPL5_CMD_H_ */ + diff --git a/drivers/net/chelsio/cxgb2.c b/drivers/net/chelsio/cxgb2.c index f607cc6a276..de48eadddbc 100644 --- a/drivers/net/chelsio/cxgb2.c +++ b/drivers/net/chelsio/cxgb2.c @@ -45,7 +45,6 @@ #include <linux/if_vlan.h> #include <linux/mii.h> #include <linux/sockios.h> -#include <linux/proc_fs.h> #include <linux/dma-mapping.h> #include <asm/uaccess.h> @@ -54,36 +53,10 @@ #include "gmac.h" #include "cphy.h" #include "sge.h" +#include "tp.h" #include "espi.h" +#include "elmer0.h" -#ifdef work_struct -#include <linux/tqueue.h> -#define INIT_WORK INIT_TQUEUE -#define schedule_work schedule_task -#define flush_scheduled_work flush_scheduled_tasks - -static inline void schedule_mac_stats_update(struct adapter *ap, int secs) -{ - mod_timer(&ap->stats_update_timer, jiffies + secs * HZ); -} - -static inline void cancel_mac_stats_update(struct adapter *ap) -{ - del_timer_sync(&ap->stats_update_timer); - flush_scheduled_tasks(); -} - -/* - * Stats update timer for 2.4. It schedules a task to do the actual update as - * we need to access MAC statistics in process context. - */ -static void mac_stats_timer(unsigned long data) -{ - struct adapter *ap = (struct adapter *)data; - - schedule_task(&ap->stats_update_task); -} -#else #include <linux/workqueue.h> static inline void schedule_mac_stats_update(struct adapter *ap, int secs) @@ -95,7 +68,6 @@ static inline void cancel_mac_stats_update(struct adapter *ap) { cancel_delayed_work(&ap->stats_update_task); } -#endif #define MAX_CMDQ_ENTRIES 16384 #define MAX_CMDQ1_ENTRIES 1024 @@ -103,10 +75,9 @@ static inline void cancel_mac_stats_update(struct adapter *ap) #define MAX_RX_JUMBO_BUFFERS 16384 #define MAX_TX_BUFFERS_HIGH 16384U #define MAX_TX_BUFFERS_LOW 1536U +#define MAX_TX_BUFFERS 1460U #define MIN_FL_ENTRIES 32 -#define PORT_MASK ((1 << MAX_NPORTS) - 1) - #define DFLT_MSG_ENABLE (NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK | \ NETIF_MSG_TIMER | NETIF_MSG_IFDOWN | NETIF_MSG_IFUP |\ NETIF_MSG_RX_ERR | NETIF_MSG_TX_ERR) @@ -124,8 +95,21 @@ MODULE_LICENSE("GPL"); static int dflt_msg_enable = DFLT_MSG_ENABLE; module_param(dflt_msg_enable, int, 0); -MODULE_PARM_DESC(dflt_msg_enable, "Chelsio T1 message enable bitmap"); +MODULE_PARM_DESC(dflt_msg_enable, "Chelsio T1 default message enable bitmap"); + +#define HCLOCK 0x0 +#define LCLOCK 0x1 + +/* T1 cards powersave mode */ +static int t1_clock(struct adapter *adapter, int mode); +static int t1powersave = 1; /* HW default is powersave mode. */ +module_param(t1powersave, int, 0); +MODULE_PARM_DESC(t1powersave, "Enable/Disable T1 powersaving mode"); + +static int disable_msi = 0; +module_param(disable_msi, int, 0); +MODULE_PARM_DESC(disable_msi, "Disable Message Signaled Interrupt (MSI)"); static const char pci_speed[][4] = { "33", "66", "100", "133" @@ -149,7 +133,7 @@ static void t1_set_rxmode(struct net_device *dev) static void link_report(struct port_info *p) { if (!netif_carrier_ok(p->dev)) - printk(KERN_INFO "%s: link down\n", p->dev->name); + printk(KERN_INFO "%s: link down\n", p->dev->name); else { const char *s = "10Mbps"; @@ -159,13 +143,13 @@ static void link_report(struct port_info *p) case SPEED_100: s = "100Mbps"; break; } - printk(KERN_INFO "%s: link up, %s, %s-duplex\n", + printk(KERN_INFO "%s: link up, %s, %s-duplex\n", p->dev->name, s, p->link_config.duplex == DUPLEX_FULL ? "full" : "half"); } } -void t1_link_changed(struct adapter *adapter, int port_id, int link_stat, +void t1_link_negotiated(struct adapter *adapter, int port_id, int link_stat, int speed, int duplex, int pause) { struct port_info *p = &adapter->port[port_id]; @@ -177,6 +161,22 @@ void t1_link_changed(struct adapter *adapter, int port_id, int link_stat, netif_carrier_off(p->dev); link_report(p); + /* multi-ports: inform toe */ + if ((speed > 0) && (adapter->params.nports > 1)) { + unsigned int sched_speed = 10; + switch (speed) { + case SPEED_1000: + sched_speed = 1000; + break; + case SPEED_100: + sched_speed = 100; + break; + case SPEED_10: + sched_speed = 10; + break; + } + t1_sched_update_parms(adapter->sge, port_id, 0, sched_speed); + } } } @@ -195,8 +195,10 @@ static void link_start(struct port_info *p) static void enable_hw_csum(struct adapter *adapter) { if (adapter->flags & TSO_CAPABLE) - t1_tp_set_ip_checksum_offload(adapter, 1); /* for TSO only */ - t1_tp_set_tcp_checksum_offload(adapter, 1); + t1_tp_set_ip_checksum_offload(adapter->tp, 1); /* for TSO only */ + if (adapter->flags & UDP_CSUM_CAPABLE) + t1_tp_set_udp_checksum_offload(adapter->tp, 1); + t1_tp_set_tcp_checksum_offload(adapter->tp, 1); } /* @@ -217,11 +219,19 @@ static int cxgb_up(struct adapter *adapter) } t1_interrupts_clear(adapter); - if ((err = request_irq(adapter->pdev->irq, - t1_select_intr_handler(adapter), IRQF_SHARED, - adapter->name, adapter))) { + + adapter->params.has_msi = !disable_msi && pci_enable_msi(adapter->pdev) == 0; + err = request_irq(adapter->pdev->irq, + t1_select_intr_handler(adapter), + adapter->params.has_msi ? 0 : IRQF_SHARED, + adapter->name, adapter); + if (err) { + if (adapter->params.has_msi) + pci_disable_msi(adapter->pdev); + goto out_err; } + t1_sge_start(adapter->sge); t1_interrupts_enable(adapter); out_err: @@ -236,6 +246,8 @@ static void cxgb_down(struct adapter *adapter) t1_sge_stop(adapter->sge); t1_interrupts_disable(adapter); free_irq(adapter->pdev->irq, adapter); + if (adapter->params.has_msi) + pci_disable_msi(adapter->pdev); } static int cxgb_open(struct net_device *dev) @@ -290,7 +302,7 @@ static struct net_device_stats *t1_get_stats(struct net_device *dev) /* Do a full update of the MAC stats */ pstats = p->mac->ops->statistics_update(p->mac, - MAC_STATS_UPDATE_FULL); + MAC_STATS_UPDATE_FULL); ns->tx_packets = pstats->TxUnicastFramesOK + pstats->TxMulticastFramesOK + pstats->TxBroadcastFramesOK; @@ -344,47 +356,53 @@ static void set_msglevel(struct net_device *dev, u32 val) } static char stats_strings[][ETH_GSTRING_LEN] = { - "TxOctetsOK", - "TxOctetsBad", - "TxUnicastFramesOK", - "TxMulticastFramesOK", - "TxBroadcastFramesOK", - "TxPauseFrames", - "TxFramesWithDeferredXmissions", - "TxLateCollisions", - "TxTotalCollisions", - "TxFramesAbortedDueToXSCollisions", - "TxUnderrun", - "TxLengthErrors", - "TxInternalMACXmitError", - "TxFramesWithExcessiveDeferral", - "TxFCSErrors", - - "RxOctetsOK", - "RxOctetsBad", - "RxUnicastFramesOK", - "RxMulticastFramesOK", - "RxBroadcastFramesOK", - "RxPauseFrames", - "RxFCSErrors", - "RxAlignErrors", - "RxSymbolErrors", - "RxDataErrors", - "RxSequenceErrors", - "RxRuntErrors", - "RxJabberErrors", - "RxInternalMACRcvError", - "RxInRangeLengthErrors", - "RxOutOfRangeLengthField", - "RxFrameTooLongErrors", - - "TSO", - "VLANextractions", - "VLANinsertions", + "TxOctetsOK", + "TxOctetsBad", + "TxUnicastFramesOK", + "TxMulticastFramesOK", + "TxBroadcastFramesOK", + "TxPauseFrames", + "TxFramesWithDeferredXmissions", + "TxLateCollisions", + "TxTotalCollisions", + "TxFramesAbortedDueToXSCollisions", + "TxUnderrun", + "TxLengthErrors", + "TxInternalMACXmitError", + "TxFramesWithExcessiveDeferral", + "TxFCSErrors", + + "RxOctetsOK", + "RxOctetsBad", + "RxUnicastFramesOK", + "RxMulticastFramesOK", + "RxBroadcastFramesOK", + "RxPauseFrames", + "RxFCSErrors", + "RxAlignErrors", + "RxSymbolErrors", + "RxDataErrors", + "RxSequenceErrors", + "RxRuntErrors", + "RxJabberErrors", + "RxInternalMACRcvError", + "RxInRangeLengthErrors", + "RxOutOfRangeLengthField", + "RxFrameTooLongErrors", + + /* Port stats */ + "RxPackets", "RxCsumGood", + "TxPackets", "TxCsumOffload", - "RxDrops" - + "TxTso", + "RxVlan", + "TxVlan", + + /* Interrupt stats */ + "rx drops", + "pure_rsps", + "unhandled irqs", "respQ_empty", "respQ_overflow", "freelistQ_empty", @@ -392,11 +410,7 @@ static char stats_strings[][ETH_GSTRING_LEN] = { "pkt_mismatch", "cmdQ_full0", "cmdQ_full1", - "tx_ipfrags", - "tx_reg_pkts", - "tx_lso_pkts", - "tx_do_cksum", - + "espi_DIP2ParityErr", "espi_DIP4Err", "espi_RxDrops", @@ -404,7 +418,7 @@ static char stats_strings[][ETH_GSTRING_LEN] = { "espi_RxOvfl", "espi_ParityErr" }; - + #define T2_REGMAP_SIZE (3 * 1024) static int get_regs_len(struct net_device *dev) @@ -439,65 +453,77 @@ static void get_stats(struct net_device *dev, struct ethtool_stats *stats, struct adapter *adapter = dev->priv; struct cmac *mac = adapter->port[dev->if_port].mac; const struct cmac_statistics *s; - const struct sge_port_stats *ss; const struct sge_intr_counts *t; + struct sge_port_stats ss; s = mac->ops->statistics_update(mac, MAC_STATS_UPDATE_FULL); - ss = t1_sge_get_port_stats(adapter->sge, dev->if_port); - t = t1_sge_get_intr_counts(adapter->sge); - *data++ = s->TxOctetsOK; - *data++ = s->TxOctetsBad; - *data++ = s->TxUnicastFramesOK; - *data++ = s->TxMulticastFramesOK; - *data++ = s->TxBroadcastFramesOK; - *data++ = s->TxPauseFrames; - *data++ = s->TxFramesWithDeferredXmissions; - *data++ = s->TxLateCollisions; - *data++ = s->TxTotalCollisions; - *data++ = s->TxFramesAbortedDueToXSCollisions; - *data++ = s->TxUnderrun; - *data++ = s->TxLengthErrors; - *data++ = s->TxInternalMACXmitError; - *data++ = s->TxFramesWithExcessiveDeferral; - *data++ = s->TxFCSErrors; - - *data++ = s->RxOctetsOK; - *data++ = s->RxOctetsBad; - *data++ = s->RxUnicastFramesOK; - *data++ = s->RxMulticastFramesOK; - *data++ = s->RxBroadcastFramesOK; - *data++ = s->RxPauseFrames; - *data++ = s->RxFCSErrors; - *data++ = s->RxAlignErrors; - *data++ = s->RxSymbolErrors; - *data++ = s->RxDataErrors; - *data++ = s->RxSequenceErrors; - *data++ = s->RxRuntErrors; - *data++ = s->RxJabberErrors; - *data++ = s->RxInternalMACRcvError; - *data++ = s->RxInRangeLengthErrors; - *data++ = s->RxOutOfRangeLengthField; - *data++ = s->RxFrameTooLongErrors; - - *data++ = ss->tso; - *data++ = ss->vlan_xtract; - *data++ = ss->vlan_insert; - *data++ = ss->rx_cso_good; - *data++ = ss->tx_cso; - *data++ = ss->rx_drops; - - *data++ = (u64)t->respQ_empty; - *data++ = (u64)t->respQ_overflow; - *data++ = (u64)t->freelistQ_empty; - *data++ = (u64)t->pkt_too_big; - *data++ = (u64)t->pkt_mismatch; - *data++ = (u64)t->cmdQ_full[0]; - *data++ = (u64)t->cmdQ_full[1]; - *data++ = (u64)t->tx_ipfrags; - *data++ = (u64)t->tx_reg_pkts; - *data++ = (u64)t->tx_lso_pkts; - *data++ = (u64)t->tx_do_cksum; + *data++ = s->TxOctetsOK; + *data++ = s->TxOctetsBad; + *data++ = s->TxUnicastFramesOK; + *data++ = s->TxMulticastFramesOK; + *data++ = s->TxBroadcastFramesOK; + *data++ = s->TxPauseFrames; + *data++ = s->TxFramesWithDeferredXmissions; + *data++ = s->TxLateCollisions; + *data++ = s->TxTotalCollisions; + *data++ = s->TxFramesAbortedDueToXSCollisions; + *data++ = s->TxUnderrun; + *data++ = s->TxLengthErrors; + *data++ = s->TxInternalMACXmitError; + *data++ = s->TxFramesWithExcessiveDeferral; + *data++ = s->TxFCSErrors; + + *data++ = s->RxOctetsOK; + *data++ = s->RxOctetsBad; + *data++ = s->RxUnicastFramesOK; + *data++ = s->RxMulticastFramesOK; + *data++ = s->RxBroadcastFramesOK; + *data++ = s->RxPauseFrames; + *data++ = s->RxFCSErrors; + *data++ = s->RxAlignErrors; + *data++ = s->RxSymbolErrors; + *data++ = s->RxDataErrors; + *data++ = s->RxSequenceErrors; + *data++ = s->RxRuntErrors; + *data++ = s->RxJabberErrors; + *data++ = s->RxInternalMACRcvError; + *data++ = s->RxInRangeLengthErrors; + *data++ = s->RxOutOfRangeLengthField; + *data++ = s->RxFrameTooLongErrors; + + t1_sge_get_port_stats(adapter->sge, dev->if_port, &ss); + *data++ = ss.rx_packets; + *data++ = ss.rx_cso_good; + *data++ = ss.tx_packets; + *data++ = ss.tx_cso; + *data++ = ss.tx_tso; + *data++ = ss.vlan_xtract; + *data++ = ss.vlan_insert; + + t = t1_sge_get_intr_counts(adapter->sge); + *data++ = t->rx_drops; + *data++ = t->pure_rsps; + *data++ = t->unhandled_irqs; + *data++ = t->respQ_empty; + *data++ = t->respQ_overflow; + *data++ = t->freelistQ_empty; + *data++ = t->pkt_too_big; + *data++ = t->pkt_mismatch; + *data++ = t->cmdQ_full[0]; + *data++ = t->cmdQ_full[1]; + + if (adapter->espi) { + const struct espi_intr_counts *e; + + e = t1_espi_get_intr_counts(adapter->espi); + *data++ = e->DIP2_parity_err; + *data++ = e->DIP4_err; + *data++ = e->rx_drops; + *data++ = e->tx_drops; + *data++ = e->rx_ovflw; + *data++ = e->parity_err; + } } static inline void reg_block_dump(struct adapter *ap, void *buf, @@ -521,6 +547,15 @@ static void get_regs(struct net_device *dev, struct ethtool_regs *regs, memset(buf, 0, T2_REGMAP_SIZE); reg_block_dump(ap, buf, 0, A_SG_RESPACCUTIMER); + reg_block_dump(ap, buf, A_MC3_CFG, A_MC4_INT_CAUSE); + reg_block_dump(ap, buf, A_TPI_ADDR, A_TPI_PAR); + reg_block_dump(ap, buf, A_TP_IN_CONFIG, A_TP_TX_DROP_COUNT); + reg_block_dump(ap, buf, A_RAT_ROUTE_CONTROL, A_RAT_INTR_CAUSE); + reg_block_dump(ap, buf, A_CSPI_RX_AE_WM, A_CSPI_INTR_ENABLE); + reg_block_dump(ap, buf, A_ESPI_SCH_TOKEN0, A_ESPI_GOSTAT); + reg_block_dump(ap, buf, A_ULP_ULIMIT, A_ULP_PIO_CTRL); + reg_block_dump(ap, buf, A_PL_ENABLE, A_PL_CAUSE); + reg_block_dump(ap, buf, A_MC5_CONFIG, A_MC5_MASK_WRITE_CMD); } static int get_settings(struct net_device *dev, struct ethtool_cmd *cmd) @@ -539,12 +574,12 @@ static int get_settings(struct net_device *dev, struct ethtool_cmd *cmd) cmd->duplex = -1; } - cmd->port = (cmd->supported & SUPPORTED_TP) ? PORT_TP : PORT_FIBRE; - cmd->phy_address = p->phy->addr; - cmd->transceiver = XCVR_EXTERNAL; - cmd->autoneg = p->link_config.autoneg; - cmd->maxtxpkt = 0; - cmd->maxrxpkt = 0; + cmd->port = (cmd->supported & SUPPORTED_TP) ? PORT_TP : PORT_FIBRE; + cmd->phy_address = p->phy->addr; + cmd->transceiver = XCVR_EXTERNAL; + cmd->autoneg = p->link_config.autoneg; + cmd->maxtxpkt = 0; + cmd->maxrxpkt = 0; return 0; } @@ -715,7 +750,7 @@ static int set_sge_param(struct net_device *dev, struct ethtool_ringparam *e) return -EINVAL; if (adapter->flags & FULL_INIT_DONE) - return -EBUSY; + return -EBUSY; adapter->params.sge.freelQ_size[!jumbo_fl] = e->rx_pending; adapter->params.sge.freelQ_size[jumbo_fl] = e->rx_jumbo_pending; @@ -759,7 +794,9 @@ static int get_coalesce(struct net_device *dev, struct ethtool_coalesce *c) static int get_eeprom_len(struct net_device *dev) { - return EEPROM_SIZE; + struct adapter *adapter = dev->priv; + + return t1_is_asic(adapter) ? EEPROM_SIZE : 0; } #define EEPROM_MAGIC(ap) \ @@ -809,47 +846,36 @@ static const struct ethtool_ops t1_ethtool_ops = { .set_tso = set_tso, }; -static void cxgb_proc_cleanup(struct adapter *adapter, - struct proc_dir_entry *dir) -{ - const char *name; - name = adapter->name; - remove_proc_entry(name, dir); -} -//#define chtoe_setup_toedev(adapter) NULL -#define update_mtu_tab(adapter) -#define write_smt_entry(adapter, idx) - static int t1_ioctl(struct net_device *dev, struct ifreq *req, int cmd) { - struct adapter *adapter = dev->priv; - struct mii_ioctl_data *data = if_mii(req); + struct adapter *adapter = dev->priv; + struct mii_ioctl_data *data = if_mii(req); switch (cmd) { - case SIOCGMIIPHY: - data->phy_id = adapter->port[dev->if_port].phy->addr; - /* FALLTHRU */ - case SIOCGMIIREG: { + case SIOCGMIIPHY: + data->phy_id = adapter->port[dev->if_port].phy->addr; + /* FALLTHRU */ + case SIOCGMIIREG: { struct cphy *phy = adapter->port[dev->if_port].phy; u32 val; if (!phy->mdio_read) - return -EOPNOTSUPP; + return -EOPNOTSUPP; phy->mdio_read(adapter, data->phy_id, 0, data->reg_num & 0x1f, &val); - data->val_out = val; - break; + data->val_out = val; + break; } - case SIOCSMIIREG: { + case SIOCSMIIREG: { struct cphy *phy = adapter->port[dev->if_port].phy; - if (!capable(CAP_NET_ADMIN)) - return -EPERM; + if (!capable(CAP_NET_ADMIN)) + return -EPERM; if (!phy->mdio_write) - return -EOPNOTSUPP; + return -EOPNOTSUPP; phy->mdio_write(adapter, data->phy_id, 0, data->reg_num & 0x1f, data->val_in); - break; + break; } default: @@ -865,9 +891,9 @@ static int t1_change_mtu(struct net_device *dev, int new_mtu) struct cmac *mac = adapter->port[dev->if_port].mac; if (!mac->ops->set_mtu) - return -EOPNOTSUPP; + return -EOPNOTSUPP; if (new_mtu < 68) - return -EINVAL; + return -EINVAL; if ((ret = mac->ops->set_mtu(mac, new_mtu))) return ret; dev->mtu = new_mtu; @@ -918,7 +944,7 @@ static void t1_netpoll(struct net_device *dev) struct adapter *adapter = dev->priv; local_irq_save(flags); - t1_select_intr_handler(adapter)(adapter->pdev->irq, adapter); + t1_select_intr_handler(adapter)(adapter->pdev->irq, adapter); local_irq_restore(flags); } #endif @@ -957,14 +983,14 @@ static void ext_intr_task(struct work_struct *work) struct adapter *adapter = container_of(work, struct adapter, ext_intr_handler_task); - elmer0_ext_intr_handler(adapter); + t1_elmer0_ext_intr_handler(adapter); /* Now reenable external interrupts */ spin_lock_irq(&adapter->async_lock); adapter->slow_intr_mask |= F_PL_INTR_EXT; writel(F_PL_INTR_EXT, adapter->regs + A_PL_CAUSE); writel(adapter->slow_intr_mask | F_PL_INTR_SGE_DATA, - adapter->regs + A_PL_ENABLE); + adapter->regs + A_PL_ENABLE); spin_unlock_irq(&adapter->async_lock); } @@ -980,7 +1006,7 @@ void t1_elmer0_ext_intr(struct adapter *adapter) */ adapter->slow_intr_mask &= ~F_PL_INTR_EXT; writel(adapter->slow_intr_mask | F_PL_INTR_SGE_DATA, - adapter->regs + A_PL_ENABLE); + adapter->regs + A_PL_ENABLE); schedule_work(&adapter->ext_intr_handler_task); } @@ -1013,7 +1039,7 @@ static int __devinit init_one(struct pci_dev *pdev, err = pci_enable_device(pdev); if (err) - return err; + return err; if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) { CH_ERR("%s: cannot find PCI device memory base address\n", @@ -1045,7 +1071,7 @@ static int __devinit init_one(struct pci_dev *pdev, pci_set_master(pdev); - mmio_start = pci_resource_start(pdev, 0); + mmio_start = pci_resource_start(pdev, 0); mmio_len = pci_resource_len(pdev, 0); bi = t1_get_board_info(ent->driver_data); @@ -1083,21 +1109,15 @@ static int __devinit init_one(struct pci_dev *pdev, adapter->msg_enable = dflt_msg_enable; adapter->mmio_len = mmio_len; - init_MUTEX(&adapter->mib_mutex); spin_lock_init(&adapter->tpi_lock); spin_lock_init(&adapter->work_lock); spin_lock_init(&adapter->async_lock); + spin_lock_init(&adapter->mac_lock); INIT_WORK(&adapter->ext_intr_handler_task, ext_intr_task); INIT_DELAYED_WORK(&adapter->stats_update_task, mac_stats_task); -#ifdef work_struct - init_timer(&adapter->stats_update_timer); - adapter->stats_update_timer.function = mac_stats_timer; - adapter->stats_update_timer.data = - (unsigned long)adapter; -#endif pci_set_drvdata(pdev, netdev); } @@ -1124,16 +1144,19 @@ static int __devinit init_one(struct pci_dev *pdev, netdev->vlan_rx_register = vlan_rx_register; netdev->vlan_rx_kill_vid = vlan_rx_kill_vid; #endif - adapter->flags |= TSO_CAPABLE; - netdev->features |= NETIF_F_TSO; + + /* T204: disable TSO */ + if (!(is_T2(adapter)) || bi->port_number != 4) { + adapter->flags |= TSO_CAPABLE; + netdev->features |= NETIF_F_TSO; + } } netdev->open = cxgb_open; netdev->stop = cxgb_close; netdev->hard_start_xmit = t1_start_xmit; netdev->hard_header_len += (adapter->flags & TSO_CAPABLE) ? - sizeof(struct cpl_tx_pkt_lso) : - sizeof(struct cpl_tx_pkt); + sizeof(struct cpl_tx_pkt_lso) : sizeof(struct cpl_tx_pkt); netdev->get_stats = t1_get_stats; netdev->set_multicast_list = t1_set_rxmode; netdev->do_ioctl = t1_ioctl; @@ -1144,7 +1167,7 @@ static int __devinit init_one(struct pci_dev *pdev, #endif netdev->weight = 64; - SET_ETHTOOL_OPS(netdev, &t1_ethtool_ops); + SET_ETHTOOL_OPS(netdev, &t1_ethtool_ops); } if (t1_init_sw_modules(adapter, bi) < 0) { @@ -1171,7 +1194,7 @@ static int __devinit init_one(struct pci_dev *pdev, if (!adapter->registered_device_map) adapter->name = adapter->port[i].dev->name; - __set_bit(i, &adapter->registered_device_map); + __set_bit(i, &adapter->registered_device_map); } } if (!adapter->registered_device_map) { @@ -1184,18 +1207,28 @@ static int __devinit init_one(struct pci_dev *pdev, bi->desc, adapter->params.chip_revision, adapter->params.pci.is_pcix ? "PCIX" : "PCI", adapter->params.pci.speed, adapter->params.pci.width); + + /* + * Set the T1B ASIC and memory clocks. + */ + if (t1powersave) + adapter->t1powersave = LCLOCK; /* HW default is powersave mode. */ + else + adapter->t1powersave = HCLOCK; + if (t1_is_T1B(adapter)) + t1_clock(adapter, t1powersave); + return 0; out_release_adapter_res: t1_free_sw_modules(adapter); out_free_dev: if (adapter) { - if (adapter->regs) iounmap(adapter->regs); + if (adapter->regs) + iounmap(adapter->regs); for (i = bi->port_number - 1; i >= 0; --i) - if (adapter->port[i].dev) { - cxgb_proc_cleanup(adapter, proc_root_driver); - kfree(adapter->port[i].dev); - } + if (adapter->port[i].dev) + free_netdev(adapter->port[i].dev); } pci_release_regions(pdev); out_disable_pdev: @@ -1204,6 +1237,155 @@ static int __devinit init_one(struct pci_dev *pdev, return err; } +static void bit_bang(struct adapter *adapter, int bitdata, int nbits) +{ + int data; + int i; + u32 val; + + enum { + S_CLOCK = 1 << 3, + S_DATA = 1 << 4 + }; + + for (i = (nbits - 1); i > -1; i--) { + + udelay(50); + + data = ((bitdata >> i) & 0x1); + __t1_tpi_read(adapter, A_ELMER0_GPO, &val); + + if (data) + val |= S_DATA; + else + val &= ~S_DATA; + + udelay(50); + + /* Set SCLOCK low */ + val &= ~S_CLOCK; + __t1_tpi_write(adapter, A_ELMER0_GPO, val); + + udelay(50); + + /* Write SCLOCK high */ + val |= S_CLOCK; + __t1_tpi_write(adapter, A_ELMER0_GPO, val); + + } +} + +static int t1_clock(struct adapter *adapter, int mode) +{ + u32 val; + int M_CORE_VAL; + int M_MEM_VAL; + + enum { + M_CORE_BITS = 9, + T_CORE_VAL = 0, + T_CORE_BITS = 2, + N_CORE_VAL = 0, + N_CORE_BITS = 2, + M_MEM_BITS = 9, + T_MEM_VAL = 0, + T_MEM_BITS = 2, + N_MEM_VAL = 0, + N_MEM_BITS = 2, + NP_LOAD = 1 << 17, + S_LOAD_MEM = 1 << 5, + S_LOAD_CORE = 1 << 6, + S_CLOCK = 1 << 3 + }; + + if (!t1_is_T1B(adapter)) + return -ENODEV; /* Can't re-clock this chip. */ + + if (mode & 2) { + return 0; /* show current mode. */ + } + + if ((adapter->t1powersave & 1) == (mode & 1)) + return -EALREADY; /* ASIC already running in mode. */ + + if ((mode & 1) == HCLOCK) { + M_CORE_VAL = 0x14; + M_MEM_VAL = 0x18; + adapter->t1powersave = HCLOCK; /* overclock */ + } else { + M_CORE_VAL = 0xe; + M_MEM_VAL = 0x10; + adapter->t1powersave = LCLOCK; /* underclock */ + } + + /* Don't interrupt this serial stream! */ + spin_lock(&adapter->tpi_lock); + + /* Initialize for ASIC core */ + __t1_tpi_read(adapter, A_ELMER0_GPO, &val); + val |= NP_LOAD; + udelay(50); + __t1_tpi_write(adapter, A_ELMER0_GPO, val); + udelay(50); + __t1_tpi_read(adapter, A_ELMER0_GPO, &val); + val &= ~S_LOAD_CORE; + val &= ~S_CLOCK; + __t1_tpi_write(adapter, A_ELMER0_GPO, val); + udelay(50); + + /* Serial program the ASIC clock synthesizer */ + bit_bang(adapter, T_CORE_VAL, T_CORE_BITS); + bit_bang(adapter, N_CORE_VAL, N_CORE_BITS); + bit_bang(adapter, M_CORE_VAL, M_CORE_BITS); + udelay(50); + + /* Finish ASIC core */ + __t1_tpi_read(adapter, A_ELMER0_GPO, &val); + val |= S_LOAD_CORE; + udelay(50); + __t1_tpi_write(adapter, A_ELMER0_GPO, val); + udelay(50); + __t1_tpi_read(adapter, A_ELMER0_GPO, &val); + val &= ~S_LOAD_CORE; + udelay(50); + __t1_tpi_write(adapter, A_ELMER0_GPO, val); + udelay(50); + + /* Initialize for memory */ + __t1_tpi_read(adapter, A_ELMER0_GPO, &val); + val |= NP_LOAD; + udelay(50); + __t1_tpi_write(adapter, A_ELMER0_GPO, val); + udelay(50); + __t1_tpi_read(adapter, A_ELMER0_GPO, &val); + val &= ~S_LOAD_MEM; + val &= ~S_CLOCK; + udelay(50); + __t1_tpi_write(adapter, A_ELMER0_GPO, val); + udelay(50); + + /* Serial program the memory clock synthesizer */ + bit_bang(adapter, T_MEM_VAL, T_MEM_BITS); + bit_bang(adapter, N_MEM_VAL, N_MEM_BITS); + bit_bang(adapter, M_MEM_VAL, M_MEM_BITS); + udelay(50); + + /* Finish memory */ + __t1_tpi_read(adapter, A_ELMER0_GPO, &val); + val |= S_LOAD_MEM; + udelay(50); + __t1_tpi_write(adapter, A_ELMER0_GPO, val); + udelay(50); + __t1_tpi_read(adapter, A_ELMER0_GPO, &val); + val &= ~S_LOAD_MEM; + udelay(50); + __t1_tpi_write(adapter, A_ELMER0_GPO, val); + + spin_unlock(&adapter->tpi_lock); + + return 0; +} + static inline void t1_sw_reset(struct pci_dev *pdev) { pci_write_config_dword(pdev, A_PCICFG_PM_CSR, 3); @@ -1225,10 +1407,9 @@ static void __devexit remove_one(struct pci_dev *pdev) t1_free_sw_modules(adapter); iounmap(adapter->regs); while (--i >= 0) - if (adapter->port[i].dev) { - cxgb_proc_cleanup(adapter, proc_root_driver); - kfree(adapter->port[i].dev); - } + if (adapter->port[i].dev) + free_netdev(adapter->port[i].dev); + pci_release_regions(pdev); pci_disable_device(pdev); pci_set_drvdata(pdev, NULL); diff --git a/drivers/net/chelsio/elmer0.h b/drivers/net/chelsio/elmer0.h index 5590cb2dac1..9ebecaa97d3 100644 --- a/drivers/net/chelsio/elmer0.h +++ b/drivers/net/chelsio/elmer0.h @@ -39,6 +39,12 @@ #ifndef _CXGB_ELMER0_H_ #define _CXGB_ELMER0_H_ +/* ELMER0 flavors */ +enum { + ELMER0_XC2S300E_6FT256_C, + ELMER0_XC2S100E_6TQ144_C +}; + /* ELMER0 registers */ #define A_ELMER0_VERSION 0x100000 #define A_ELMER0_PHY_CFG 0x100004 @@ -149,3 +155,4 @@ #define MI1_OP_INDIRECT_READ 3 #endif /* _CXGB_ELMER0_H_ */ + diff --git a/drivers/net/chelsio/espi.c b/drivers/net/chelsio/espi.c index 542e5e065c6..4192f0f5b3e 100644 --- a/drivers/net/chelsio/espi.c +++ b/drivers/net/chelsio/espi.c @@ -81,46 +81,36 @@ static int tricn_write(adapter_t *adapter, int bundle_addr, int module_addr, return busy; } -/* 1. Deassert rx_reset_core. */ -/* 2. Program TRICN_CNFG registers. */ -/* 3. Deassert rx_reset_link */ static int tricn_init(adapter_t *adapter) { - int i = 0; - int stat = 0; - int timeout = 0; - int is_ready = 0; + int i, sme = 1; - /* 1 */ - timeout=1000; - do { - stat = readl(adapter->regs + A_ESPI_RX_RESET); - is_ready = (stat & 0x4); - timeout--; - udelay(5); - } while (!is_ready || (timeout==0)); - writel(0x2, adapter->regs + A_ESPI_RX_RESET); - if (timeout==0) - { - CH_ERR("ESPI : ERROR : Timeout tricn_init() \n"); - t1_fatal_err(adapter); + if (!(readl(adapter->regs + A_ESPI_RX_RESET) & F_RX_CLK_STATUS)) { + CH_ERR("%s: ESPI clock not ready\n", adapter->name); + return -1; } - /* 2 */ - tricn_write(adapter, 0, 0, 0, TRICN_CNFG, 0x81); - tricn_write(adapter, 0, 1, 0, TRICN_CNFG, 0x81); - tricn_write(adapter, 0, 2, 0, TRICN_CNFG, 0x81); - for (i=1; i<= 8; i++) tricn_write(adapter, 0, 0, i, TRICN_CNFG, 0xf1); - for (i=1; i<= 2; i++) tricn_write(adapter, 0, 1, i, TRICN_CNFG, 0xf1); - for (i=1; i<= 3; i++) tricn_write(adapter, 0, 2, i, TRICN_CNFG, 0xe1); - for (i=4; i<= 4; i++) tricn_write(adapter, 0, 2, i, TRICN_CNFG, 0xf1); - for (i=5; i<= 5; i++) tricn_write(adapter, 0, 2, i, TRICN_CNFG, 0xe1); - for (i=6; i<= 6; i++) tricn_write(adapter, 0, 2, i, TRICN_CNFG, 0xf1); - for (i=7; i<= 7; i++) tricn_write(adapter, 0, 2, i, TRICN_CNFG, 0x80); - for (i=8; i<= 8; i++) tricn_write(adapter, 0, 2, i, TRICN_CNFG, 0xf1); - - /* 3 */ - writel(0x3, adapter->regs + A_ESPI_RX_RESET); + writel(F_ESPI_RX_CORE_RST, adapter->regs + A_ESPI_RX_RESET); + + if (sme) { + tricn_write(adapter, 0, 0, 0, TRICN_CNFG, 0x81); + tricn_write(adapter, 0, 1, 0, TRICN_CNFG, 0x81); + tricn_write(adapter, 0, 2, 0, TRICN_CNFG, 0x81); + } + for (i = 1; i <= 8; i++) + tricn_write(adapter, 0, 0, i, TRICN_CNFG, 0xf1); + for (i = 1; i <= 2; i++) + tricn_write(adapter, 0, 1, i, TRICN_CNFG, 0xf1); + for (i = 1; i <= 3; i++) + tricn_write(adapter, 0, 2, i, TRICN_CNFG, 0xe1); + tricn_write(adapter, 0, 2, 4, TRICN_CNFG, 0xf1); + tricn_write(adapter, 0, 2, 5, TRICN_CNFG, 0xe1); + tricn_write(adapter, 0, 2, 6, TRICN_CNFG, 0xf1); + tricn_write(adapter, 0, 2, 7, TRICN_CNFG, 0x80); + tricn_write(adapter, 0, 2, 8, TRICN_CNFG, 0xf1); + + writel(F_ESPI_RX_CORE_RST | F_ESPI_RX_LNK_RST, + adapter->regs + A_ESPI_RX_RESET); return 0; } @@ -143,6 +133,7 @@ void t1_espi_intr_enable(struct peespi *espi) void t1_espi_intr_clear(struct peespi *espi) { + readl(espi->adapter->regs + A_ESPI_DIP2_ERR_COUNT); writel(0xffffffff, espi->adapter->regs + A_ESPI_INTR_STATUS); writel(F_PL_INTR_ESPI, espi->adapter->regs + A_PL_CAUSE); } @@ -157,7 +148,6 @@ void t1_espi_intr_disable(struct peespi *espi) int t1_espi_intr_handler(struct peespi *espi) { - u32 cnt; u32 status = readl(espi->adapter->regs + A_ESPI_INTR_STATUS); if (status & F_DIP4ERR) @@ -177,7 +167,7 @@ int t1_espi_intr_handler(struct peespi *espi) * Must read the error count to clear the interrupt * that it causes. */ - cnt = readl(espi->adapter->regs + A_ESPI_DIP2_ERR_COUNT); + readl(espi->adapter->regs + A_ESPI_DIP2_ERR_COUNT); } /* @@ -192,7 +182,7 @@ int t1_espi_intr_handler(struct peespi *espi) const struct espi_intr_counts *t1_espi_get_intr_counts(struct peespi *espi) { - return &espi->intr_cnt; + return &espi->intr_cnt; } static void espi_setup_for_pm3393(adapter_t *adapter) @@ -210,17 +200,45 @@ static void espi_setup_for_pm3393(adapter_t *adapter) writel(V_RX_NPORTS(1) | V_TX_NPORTS(1), adapter->regs + A_PORT_CONFIG); } -/* T2 Init part -- */ -/* 1. Set T_ESPI_MISCCTRL_ADDR */ -/* 2. Init ESPI registers. */ -/* 3. Init TriCN Hard Macro */ -int t1_espi_init(struct peespi *espi, int mac_type, int nports) +static void espi_setup_for_vsc7321(adapter_t *adapter) +{ + writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN0); + writel(0x1f401f4, adapter->regs + A_ESPI_SCH_TOKEN1); + writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN2); + writel(0xa00, adapter->regs + A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK); + writel(0x1ff, adapter->regs + A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK); + writel(1, adapter->regs + A_ESPI_CALENDAR_LENGTH); + writel(V_RX_NPORTS(4) | V_TX_NPORTS(4), adapter->regs + A_PORT_CONFIG); + + writel(0x08000008, adapter->regs + A_ESPI_TRAIN); +} + +/* + * Note that T1B requires at least 2 ports for IXF1010 due to a HW bug. + */ +static void espi_setup_for_ixf1010(adapter_t *adapter, int nports) { - u32 cnt; + writel(1, adapter->regs + A_ESPI_CALENDAR_LENGTH); + if (nports == 4) { + if (is_T2(adapter)) { + writel(0xf00, adapter->regs + A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK); + writel(0x3c0, adapter->regs + A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK); + } else { + writel(0x7ff, adapter->regs + A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK); + writel(0x1ff, adapter->regs + A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK); + } + } else { + writel(0x1fff, adapter->regs + A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK); + writel(0x7ff, adapter->regs + A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK); + } + writel(V_RX_NPORTS(nports) | V_TX_NPORTS(nports), adapter->regs + A_PORT_CONFIG); +} + +int t1_espi_init(struct peespi *espi, int mac_type, int nports) +{ u32 status_enable_extra = 0; adapter_t *adapter = espi->adapter; - u32 status, burstval = 0x800100; /* Disable ESPI training. MACs that can handle it enable it below. */ writel(0, adapter->regs + A_ESPI_TRAIN); @@ -229,38 +247,20 @@ int t1_espi_init(struct peespi *espi, int mac_type, int nports) writel(V_OUT_OF_SYNC_COUNT(4) | V_DIP2_PARITY_ERR_THRES(3) | V_DIP4_THRES(1), adapter->regs + A_ESPI_MISC_CONTROL); - if (nports == 4) { - /* T204: maxburst1 = 0x40, maxburst2 = 0x20 */ - burstval = 0x200040; - } - } - writel(burstval, adapter->regs + A_ESPI_MAXBURST1_MAXBURST2); + writel(nports == 4 ? 0x200040 : 0x1000080, + adapter->regs + A_ESPI_MAXBURST1_MAXBURST2); + } else + writel(0x800100, adapter->regs + A_ESPI_MAXBURST1_MAXBURST2); - switch (mac_type) { - case CHBT_MAC_PM3393: + if (mac_type == CHBT_MAC_PM3393) espi_setup_for_pm3393(adapter); - break; - default: + else if (mac_type == CHBT_MAC_VSC7321) + espi_setup_for_vsc7321(adapter); + else if (mac_type == CHBT_MAC_IXF1010) { + status_enable_extra = F_INTEL1010MODE; + espi_setup_for_ixf1010(adapter, nports); + } else return -1; - } - - /* - * Make sure any pending interrupts from the SPI are - * Cleared before enabling the interrupt. - */ - writel(ESPI_INTR_MASK, espi->adapter->regs + A_ESPI_INTR_ENABLE); - status = readl(espi->adapter->regs + A_ESPI_INTR_STATUS); - if (status & F_DIP2PARITYERR) { - cnt = readl(espi->adapter->regs + A_ESPI_DIP2_ERR_COUNT); - } - - /* - * For T1B we need to write 1 to clear ESPI interrupts. For T2+ we - * write the status as is. - */ - if (status && t1_is_T1B(espi->adapter)) - status = 1; - writel(status, espi->adapter->regs + A_ESPI_INTR_STATUS); writel(status_enable_extra | F_RXSTATUSENABLE, adapter->regs + A_ESPI_FIFO_STATUS_ENABLE); @@ -271,9 +271,11 @@ int t1_espi_init(struct peespi *espi, int mac_type, int nports) * Always position the control at the 1st port egress IN * (sop,eop) counter to reduce PIOs for T/N210 workaround. */ - espi->misc_ctrl = (readl(adapter->regs + A_ESPI_MISC_CONTROL) - & ~MON_MASK) | (F_MONITORED_DIRECTION - | F_MONITORED_INTERFACE); + espi->misc_ctrl = readl(adapter->regs + A_ESPI_MISC_CONTROL); + espi->misc_ctrl &= ~MON_MASK; + espi->misc_ctrl |= F_MONITORED_DIRECTION; + if (adapter->params.nports == 1) + espi->misc_ctrl |= F_MONITORED_INTERFACE; writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL); spin_lock_init(&espi->lock); } @@ -299,8 +301,7 @@ void t1_espi_set_misc_ctrl(adapter_t *adapter, u32 val) { struct peespi *espi = adapter->espi; - if (!is_T2(adapter)) - return; + if (!is_T2(adapter)) return; spin_lock(&espi->lock); espi->misc_ctrl = (val & ~MON_MASK) | (espi->misc_ctrl & MON_MASK); @@ -310,27 +311,61 @@ void t1_espi_set_misc_ctrl(adapter_t *adapter, u32 val) u32 t1_espi_get_mon(adapter_t *adapter, u32 addr, u8 wait) { - u32 sel; - struct peespi *espi = adapter->espi; + u32 sel; if (!is_T2(adapter)) return 0; + sel = V_MONITORED_PORT_NUM((addr & 0x3c) >> 2); if (!wait) { if (!spin_trylock(&espi->lock)) return 0; - } - else + } else spin_lock(&espi->lock); + if ((sel != (espi->misc_ctrl & MON_MASK))) { writel(((espi->misc_ctrl & ~MON_MASK) | sel), adapter->regs + A_ESPI_MISC_CONTROL); sel = readl(adapter->regs + A_ESPI_SCH_TOKEN3); writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL); - } - else + } else sel = readl(adapter->regs + A_ESPI_SCH_TOKEN3); spin_unlock(&espi->lock); return sel; } + +/* + * This function is for T204 only. + * compare with t1_espi_get_mon(), it reads espiInTxSop[0 ~ 3] in + * one shot, since there is no per port counter on the out side. + */ +int +t1_espi_get_mon_t204(adapter_t *adapter, u32 *valp, u8 wait) +{ + struct peespi *espi = adapter->espi; + u8 i, nport = (u8)adapter->params.nports; + + if (!wait) { + if (!spin_trylock(&espi->lock)) + return -1; + } else + spin_lock(&espi->lock); + + if ( (espi->misc_ctrl & MON_MASK) != F_MONITORED_DIRECTION ) { + espi->misc_ctrl = (espi->misc_ctrl & ~MON_MASK) | + F_MONITORED_DIRECTION; + writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL); + } + for (i = 0 ; i < nport; i++, valp++) { + if (i) { + writel(espi->misc_ctrl | V_MONITORED_PORT_NUM(i), + adapter->regs + A_ESPI_MISC_CONTROL); + } + *valp = readl(adapter->regs + A_ESPI_SCH_TOKEN3); + } + + writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL); + spin_unlock(&espi->lock); + return 0; +} diff --git a/drivers/net/chelsio/espi.h b/drivers/net/chelsio/espi.h index c90e37f8457..84f2c98bc4c 100644 --- a/drivers/net/chelsio/espi.h +++ b/drivers/net/chelsio/espi.h @@ -64,5 +64,6 @@ const struct espi_intr_counts *t1_espi_get_intr_counts(struct peespi *espi); void t1_espi_set_misc_ctrl(adapter_t *adapter, u32 val); u32 t1_espi_get_mon(adapter_t *adapter, u32 addr, u8 wait); +int t1_espi_get_mon_t204(adapter_t *, u32 *, u8); #endif /* _CXGB_ESPI_H_ */ diff --git a/drivers/net/chelsio/fpga_defs.h b/drivers/net/chelsio/fpga_defs.h new file mode 100644 index 00000000000..17a3c2ba36a --- /dev/null +++ b/drivers/net/chelsio/fpga_defs.h @@ -0,0 +1,232 @@ +/* $Date: 2005/03/07 23:59:05 $ $RCSfile: fpga_defs.h,v $ $Revision: 1.4 $ */ + +/* + * FPGA specific definitions + */ + +#ifndef __CHELSIO_FPGA_DEFS_H__ +#define __CHELSIO_FPGA_DEFS_H__ + +#define FPGA_PCIX_ADDR_VERSION 0xA08 +#define FPGA_PCIX_ADDR_STAT 0xA0C + +/* FPGA master interrupt Cause/Enable bits */ +#define FPGA_PCIX_INTERRUPT_SGE_ERROR 0x1 +#define FPGA_PCIX_INTERRUPT_SGE_DATA 0x2 +#define FPGA_PCIX_INTERRUPT_TP 0x4 +#define FPGA_PCIX_INTERRUPT_MC3 0x8 +#define FPGA_PCIX_INTERRUPT_GMAC 0x10 +#define FPGA_PCIX_INTERRUPT_PCIX 0x20 + +/* TP interrupt register addresses */ +#define FPGA_TP_ADDR_INTERRUPT_ENABLE 0xA10 +#define FPGA_TP_ADDR_INTERRUPT_CAUSE 0xA14 +#define FPGA_TP_ADDR_VERSION 0xA18 + +/* TP interrupt Cause/Enable bits */ +#define FPGA_TP_INTERRUPT_MC4 0x1 +#define FPGA_TP_INTERRUPT_MC5 0x2 + +/* + * PM interrupt register addresses + */ +#define FPGA_MC3_REG_INTRENABLE 0xA20 +#define FPGA_MC3_REG_INTRCAUSE 0xA24 +#define FPGA_MC3_REG_VERSION 0xA28 + +/* + * GMAC interrupt register addresses + */ +#define FPGA_GMAC_ADDR_INTERRUPT_ENABLE 0xA30 +#define FPGA_GMAC_ADDR_INTERRUPT_CAUSE 0xA34 +#define FPGA_GMAC_ADDR_VERSION 0xA38 + +/* GMAC Cause/Enable bits */ +#define FPGA_GMAC_INTERRUPT_PORT0 0x1 +#define FPGA_GMAC_INTERRUPT_PORT1 0x2 +#define FPGA_GMAC_INTERRUPT_PORT2 0x4 +#define FPGA_GMAC_INTERRUPT_PORT3 0x8 + +/* MI0 registers */ +#define A_MI0_CLK 0xb00 + +#define S_MI0_CLK_DIV 0 +#define M_MI0_CLK_DIV 0xff +#define V_MI0_CLK_DIV(x) ((x) << S_MI0_CLK_DIV) +#define G_MI0_CLK_DIV(x) (((x) >> S_MI0_CLK_DIV) & M_MI0_CLK_DIV) + +#define S_MI0_CLK_CNT 8 +#define M_MI0_CLK_CNT 0xff +#define V_MI0_CLK_CNT(x) ((x) << S_MI0_CLK_CNT) +#define G_MI0_CLK_CNT(x) (((x) >> S_MI0_CLK_CNT) & M_MI0_CLK_CNT) + +#define A_MI0_CSR 0xb04 + +#define S_MI0_CSR_POLL 0 +#define V_MI0_CSR_POLL(x) ((x) << S_MI0_CSR_POLL) +#define F_MI0_CSR_POLL V_MI0_CSR_POLL(1U) + +#define S_MI0_PREAMBLE 1 +#define V_MI0_PREAMBLE(x) ((x) << S_MI0_PREAMBLE) +#define F_MI0_PREAMBLE V_MI0_PREAMBLE(1U) + +#define S_MI0_INTR_ENABLE 2 +#define V_MI0_INTR_ENABLE(x) ((x) << S_MI0_INTR_ENABLE) +#define F_MI0_INTR_ENABLE V_MI0_INTR_ENABLE(1U) + +#define S_MI0_BUSY 3 +#define V_MI0_BUSY(x) ((x) << S_MI0_BUSY) +#define F_MI0_BUSY V_MI0_BUSY(1U) + +#define S_MI0_MDIO 4 +#define V_MI0_MDIO(x) ((x) << S_MI0_MDIO) +#define F_MI0_MDIO V_MI0_MDIO(1U) + +#define A_MI0_ADDR 0xb08 + +#define S_MI0_PHY_REG_ADDR 0 +#define M_MI0_PHY_REG_ADDR 0x1f +#define V_MI0_PHY_REG_ADDR(x) ((x) << S_MI0_PHY_REG_ADDR) +#define G_MI0_PHY_REG_ADDR(x) (((x) >> S_MI0_PHY_REG_ADDR) & M_MI0_PHY_REG_ADDR) + +#define S_MI0_PHY_ADDR 5 +#define M_MI0_PHY_ADDR 0x1f +#define V_MI0_PHY_ADDR(x) ((x) << S_MI0_PHY_ADDR) +#define G_MI0_PHY_ADDR(x) (((x) >> S_MI0_PHY_ADDR) & M_MI0_PHY_ADDR) + +#define A_MI0_DATA_EXT 0xb0c +#define A_MI0_DATA_INT 0xb10 + +/* GMAC registers */ +#define A_GMAC_MACID_LO 0x28 +#define A_GMAC_MACID_HI 0x2c +#define A_GMAC_CSR 0x30 + +#define S_INTERFACE 0 +#define M_INTERFACE 0x3 +#define V_INTERFACE(x) ((x) << S_INTERFACE) +#define G_INTERFACE(x) (((x) >> S_INTERFACE) & M_INTERFACE) + +#define S_MAC_TX_ENABLE 2 +#define V_MAC_TX_ENABLE(x) ((x) << S_MAC_TX_ENABLE) +#define F_MAC_TX_ENABLE V_MAC_TX_ENABLE(1U) + +#define S_MAC_RX_ENABLE 3 +#define V_MAC_RX_ENABLE(x) ((x) << S_MAC_RX_ENABLE) +#define F_MAC_RX_ENABLE V_MAC_RX_ENABLE(1U) + +#define S_MAC_LB_ENABLE 4 +#define V_MAC_LB_ENABLE(x) ((x) << S_MAC_LB_ENABLE) +#define F_MAC_LB_ENABLE V_MAC_LB_ENABLE(1U) + +#define S_MAC_SPEED 5 +#define M_MAC_SPEED 0x3 +#define V_MAC_SPEED(x) ((x) << S_MAC_SPEED) +#define G_MAC_SPEED(x) (((x) >> S_MAC_SPEED) & M_MAC_SPEED) + +#define S_MAC_HD_FC_ENABLE 7 +#define V_MAC_HD_FC_ENABLE(x) ((x) << S_MAC_HD_FC_ENABLE) +#define F_MAC_HD_FC_ENABLE V_MAC_HD_FC_ENABLE(1U) + +#define S_MAC_HALF_DUPLEX 8 +#define V_MAC_HALF_DUPLEX(x) ((x) << S_MAC_HALF_DUPLEX) +#define F_MAC_HALF_DUPLEX V_MAC_HALF_DUPLEX(1U) + +#define S_MAC_PROMISC 9 +#define V_MAC_PROMISC(x) ((x) << S_MAC_PROMISC) +#define F_MAC_PROMISC V_MAC_PROMISC(1U) + +#define S_MAC_MC_ENABLE 10 +#define V_MAC_MC_ENABLE(x) ((x) << S_MAC_MC_ENABLE) +#define F_MAC_MC_ENABLE V_MAC_MC_ENABLE(1U) + +#define S_MAC_RESET 11 +#define V_MAC_RESET(x) ((x) << S_MAC_RESET) +#define F_MAC_RESET V_MAC_RESET(1U) + +#define S_MAC_RX_PAUSE_ENABLE 12 +#define V_MAC_RX_PAUSE_ENABLE(x) ((x) << S_MAC_RX_PAUSE_ENABLE) +#define F_MAC_RX_PAUSE_ENABLE V_MAC_RX_PAUSE_ENABLE(1U) + +#define S_MAC_TX_PAUSE_ENABLE 13 +#define V_MAC_TX_PAUSE_ENABLE(x) ((x) << S_MAC_TX_PAUSE_ENABLE) +#define F_MAC_TX_PAUSE_ENABLE V_MAC_TX_PAUSE_ENABLE(1U) + +#define S_MAC_LWM_ENABLE 14 +#define V_MAC_LWM_ENABLE(x) ((x) << S_MAC_LWM_ENABLE) +#define F_MAC_LWM_ENABLE V_MAC_LWM_ENABLE(1U) + +#define S_MAC_MAGIC_PKT_ENABLE 15 +#define V_MAC_MAGIC_PKT_ENABLE(x) ((x) << S_MAC_MAGIC_PKT_ENABLE) +#define F_MAC_MAGIC_PKT_ENABLE V_MAC_MAGIC_PKT_ENABLE(1U) + +#define S_MAC_ISL_ENABLE 16 +#define V_MAC_ISL_ENABLE(x) ((x) << S_MAC_ISL_ENABLE) +#define F_MAC_ISL_ENABLE V_MAC_ISL_ENABLE(1U) + +#define S_MAC_JUMBO_ENABLE 17 +#define V_MAC_JUMBO_ENABLE(x) ((x) << S_MAC_JUMBO_ENABLE) +#define F_MAC_JUMBO_ENABLE V_MAC_JUMBO_ENABLE(1U) + +#define S_MAC_RX_PAD_ENABLE 18 +#define V_MAC_RX_PAD_ENABLE(x) ((x) << S_MAC_RX_PAD_ENABLE) +#define F_MAC_RX_PAD_ENABLE V_MAC_RX_PAD_ENABLE(1U) + +#define S_MAC_RX_CRC_ENABLE 19 +#define V_MAC_RX_CRC_ENABLE(x) ((x) << S_MAC_RX_CRC_ENABLE) +#define F_MAC_RX_CRC_ENABLE V_MAC_RX_CRC_ENABLE(1U) + +#define A_GMAC_IFS 0x34 + +#define S_MAC_IFS2 0 +#define M_MAC_IFS2 0x3f +#define V_MAC_IFS2(x) ((x) << S_MAC_IFS2) +#define G_MAC_IFS2(x) (((x) >> S_MAC_IFS2) & M_MAC_IFS2) + +#define S_MAC_IFS1 8 +#define M_MAC_IFS1 0x7f +#define V_MAC_IFS1(x) ((x) << S_MAC_IFS1) +#define G_MAC_IFS1(x) (((x) >> S_MAC_IFS1) & M_MAC_IFS1) + +#define A_GMAC_JUMBO_FRAME_LEN 0x38 +#define A_GMAC_LNK_DLY 0x3c +#define A_GMAC_PAUSETIME 0x40 +#define A_GMAC_MCAST_LO 0x44 +#define A_GMAC_MCAST_HI 0x48 +#define A_GMAC_MCAST_MASK_LO 0x4c +#define A_GMAC_MCAST_MASK_HI 0x50 +#define A_GMAC_RMT_CNT 0x54 +#define A_GMAC_RMT_DATA 0x58 +#define A_GMAC_BACKOFF_SEED 0x5c +#define A_GMAC_TXF_THRES 0x60 + +#define S_TXF_READ_THRESHOLD 0 +#define M_TXF_READ_THRESHOLD 0xff +#define V_TXF_READ_THRESHOLD(x) ((x) << S_TXF_READ_THRESHOLD) +#define G_TXF_READ_THRESHOLD(x) (((x) >> S_TXF_READ_THRESHOLD) & M_TXF_READ_THRESHOLD) + +#define S_TXF_WRITE_THRESHOLD 16 +#define M_TXF_WRITE_THRESHOLD 0xff +#define V_TXF_WRITE_THRESHOLD(x) ((x) << S_TXF_WRITE_THRESHOLD) +#define G_TXF_WRITE_THRESHOLD(x) (((x) >> S_TXF_WRITE_THRESHOLD) & M_TXF_WRITE_THRESHOLD) + +#define MAC_REG_BASE 0x600 +#define MAC_REG_ADDR(idx, reg) (MAC_REG_BASE + (idx) * 128 + (reg)) + +#define MAC_REG_IDLO(idx) MAC_REG_ADDR(idx, A_GMAC_MACID_LO) +#define MAC_REG_IDHI(idx) MAC_REG_ADDR(idx, A_GMAC_MACID_HI) +#define MAC_REG_CSR(idx) MAC_REG_ADDR(idx, A_GMAC_CSR) +#define MAC_REG_IFS(idx) MAC_REG_ADDR(idx, A_GMAC_IFS) +#define MAC_REG_LARGEFRAMELENGTH(idx) MAC_REG_ADDR(idx, A_GMAC_JUMBO_FRAME_LEN) +#define MAC_REG_LINKDLY(idx) MAC_REG_ADDR(idx, A_GMAC_LNK_DLY) +#define MAC_REG_PAUSETIME(idx) MAC_REG_ADDR(idx, A_GMAC_PAUSETIME) +#define MAC_REG_CASTLO(idx) MAC_REG_ADDR(idx, A_GMAC_MCAST_LO) +#define MAC_REG_MCASTHI(idx) MAC_REG_ADDR(idx, A_GMAC_MCAST_HI) +#define MAC_REG_CASTMASKLO(idx) MAC_REG_ADDR(idx, A_GMAC_MCAST_MASK_LO) +#define MAC_REG_MCASTMASKHI(idx) MAC_REG_ADDR(idx, A_GMAC_MCAST_MASK_HI) +#define MAC_REG_RMCNT(idx) MAC_REG_ADDR(idx, A_GMAC_RMT_CNT) +#define MAC_REG_RMDATA(idx) MAC_REG_ADDR(idx, A_GMAC_RMT_DATA) +#define MAC_REG_GMRANDBACKOFFSEED(idx) MAC_REG_ADDR(idx, A_GMAC_BACKOFF_SEED) +#define MAC_REG_TXFTHRESHOLDS(idx) MAC_REG_ADDR(idx, A_GMAC_TXF_THRES) + +#endif diff --git a/drivers/net/chelsio/gmac.h b/drivers/net/chelsio/gmac.h index 746b0eeea96..a2b8ad9b553 100644 --- a/drivers/net/chelsio/gmac.h +++ b/drivers/net/chelsio/gmac.h @@ -62,6 +62,8 @@ struct cmac_statistics { u64 TxInternalMACXmitError; u64 TxFramesWithExcessiveDeferral; u64 TxFCSErrors; + u64 TxJumboFramesOK; + u64 TxJumboOctetsOK; /* Receive */ u64 RxOctetsOK; @@ -81,6 +83,8 @@ struct cmac_statistics { u64 RxInRangeLengthErrors; u64 RxOutOfRangeLengthField; u64 RxFrameTooLongErrors; + u64 RxJumboFramesOK; + u64 RxJumboOctetsOK; }; struct cmac_ops { @@ -128,6 +132,7 @@ struct gmac { extern struct gmac t1_pm3393_ops; extern struct gmac t1_chelsio_mac_ops; extern struct gmac t1_vsc7321_ops; +extern struct gmac t1_vsc7326_ops; extern struct gmac t1_ixf1010_ops; extern struct gmac t1_dummy_mac_ops; diff --git a/drivers/net/chelsio/ixf1010.c b/drivers/net/chelsio/ixf1010.c new file mode 100644 index 00000000000..5b8f144e83d --- /dev/null +++ b/drivers/net/chelsio/ixf1010.c @@ -0,0 +1,485 @@ +/* $Date: 2005/11/12 02:13:49 $ $RCSfile: ixf1010.c,v $ $Revision: 1.36 $ */ +#include "gmac.h" +#include "elmer0.h" + +/* Update fast changing statistics every 15 seconds */ +#define STATS_TICK_SECS 15 +/* 30 minutes for full statistics update */ +#define MAJOR_UPDATE_TICKS (1800 / STATS_TICK_SECS) + +/* + * The IXF1010 can handle frames up to 16383 bytes but it's optimized for + * frames up to 9831 (0x2667) bytes, so we limit jumbo frame size to this. + * This length includes ethernet header and FCS. + */ +#define MAX_FRAME_SIZE 0x2667 + +/* MAC registers */ +enum { + /* Per-port registers */ + REG_MACADDR_LOW = 0, + REG_MACADDR_HIGH = 0x4, + REG_FDFC_TYPE = 0xC, + REG_FC_TX_TIMER_VALUE = 0x1c, + REG_IPG_RX_TIME1 = 0x28, + REG_IPG_RX_TIME2 = 0x2c, + REG_IPG_TX_TIME = 0x30, + REG_PAUSE_THRES = 0x38, + REG_MAX_FRAME_SIZE = 0x3c, + REG_RGMII_SPEED = 0x40, + REG_FC_ENABLE = 0x48, + REG_DISCARD_CTRL_FRAMES = 0x54, + REG_DIVERSE_CONFIG = 0x60, + REG_RX_FILTER = 0x64, + REG_MC_ADDR_LOW = 0x68, + REG_MC_ADDR_HIGH = 0x6c, + + REG_RX_OCTETS_OK = 0x80, + REG_RX_OCTETS_BAD = 0x84, + REG_RX_UC_PKTS = 0x88, + REG_RX_MC_PKTS = 0x8c, + REG_RX_BC_PKTS = 0x90, + REG_RX_FCS_ERR = 0xb0, + REG_RX_TAGGED = 0xb4, + REG_RX_DATA_ERR = 0xb8, + REG_RX_ALIGN_ERR = 0xbc, + REG_RX_LONG_ERR = 0xc0, + REG_RX_JABBER_ERR = 0xc4, + REG_RX_PAUSE_FRAMES = 0xc8, + REG_RX_UNKNOWN_CTRL_FRAMES = 0xcc, + REG_RX_VERY_LONG_ERR = 0xd0, + REG_RX_RUNT_ERR = 0xd4, + REG_RX_SHORT_ERR = 0xd8, + REG_RX_SYMBOL_ERR = 0xe4, + + REG_TX_OCTETS_OK = 0x100, + REG_TX_OCTETS_BAD = 0x104, + REG_TX_UC_PKTS = 0x108, + REG_TX_MC_PKTS = 0x10c, + REG_TX_BC_PKTS = 0x110, + REG_TX_EXCESSIVE_LEN_DROP = 0x14c, + REG_TX_UNDERRUN = 0x150, + REG_TX_TAGGED = 0x154, + REG_TX_PAUSE_FRAMES = 0x15C, + + /* Global registers */ + REG_PORT_ENABLE = 0x1400, + + REG_JTAG_ID = 0x1430, + + RX_FIFO_HIGH_WATERMARK_BASE = 0x1600, + RX_FIFO_LOW_WATERMARK_BASE = 0x1628, + RX_FIFO_FRAMES_REMOVED_BASE = 0x1650, + + REG_RX_ERR_DROP = 0x167c, + REG_RX_FIFO_OVERFLOW_EVENT = 0x1680, + + TX_FIFO_HIGH_WATERMARK_BASE = 0x1800, + TX_FIFO_LOW_WATERMARK_BASE = 0x1828, + TX_FIFO_XFER_THRES_BASE = 0x1850, + + REG_TX_FIFO_OVERFLOW_EVENT = 0x1878, + REG_TX_FIFO_OOS_EVENT = 0x1884, + + TX_FIFO_FRAMES_REMOVED_BASE = 0x1888, + + REG_SPI_RX_BURST = 0x1c00, + REG_SPI_RX_TRAINING = 0x1c04, + REG_SPI_RX_CALENDAR = 0x1c08, + REG_SPI_TX_SYNC = 0x1c0c +}; + +enum { /* RMON registers */ + REG_RxOctetsTotalOK = 0x80, + REG_RxOctetsBad = 0x84, + REG_RxUCPkts = 0x88, + REG_RxMCPkts = 0x8c, + REG_RxBCPkts = 0x90, + REG_RxJumboPkts = 0xac, + REG_RxFCSErrors = 0xb0, + REG_RxDataErrors = 0xb8, + REG_RxAlignErrors = 0xbc, + REG_RxLongErrors = 0xc0, + REG_RxJabberErrors = 0xc4, + REG_RxPauseMacControlCounter = 0xc8, + REG_RxVeryLongErrors = 0xd0, + REG_RxRuntErrors = 0xd4, + REG_RxShortErrors = 0xd8, + REG_RxSequenceErrors = 0xe0, + REG_RxSymbolErrors = 0xe4, + + REG_TxOctetsTotalOK = 0x100, + REG_TxOctetsBad = 0x104, + REG_TxUCPkts = 0x108, + REG_TxMCPkts = 0x10c, + REG_TxBCPkts = 0x110, + REG_TxJumboPkts = 0x12C, + REG_TxTotalCollisions = 0x134, + REG_TxExcessiveLengthDrop = 0x14c, + REG_TxUnderrun = 0x150, + REG_TxCRCErrors = 0x158, + REG_TxPauseFrames = 0x15c +}; + +enum { + DIVERSE_CONFIG_PAD_ENABLE = 0x80, + DIVERSE_CONFIG_CRC_ADD = 0x40 +}; + +#define MACREG_BASE 0 +#define MACREG(mac, mac_reg) ((mac)->instance->mac_base + (mac_reg)) + +struct _cmac_instance { + u32 mac_base; + u32 index; + u32 version; + u32 ticks; +}; + +static void disable_port(struct cmac *mac) +{ + u32 val; + + t1_tpi_read(mac->adapter, REG_PORT_ENABLE, &val); + val &= ~(1 << mac->instance->index); + t1_tpi_write(mac->adapter, REG_PORT_ENABLE, val); +} + +#define RMON_UPDATE(mac, name, stat_name) \ + t1_tpi_read((mac)->adapter, MACREG(mac, REG_##name), &val); \ + (mac)->stats.stat_name += val; + +/* + * Read the current values of the RMON counters and add them to the cumulative + * port statistics. The HW RMON counters are cleared by this operation. + */ +static void port_stats_update(struct cmac *mac) +{ + u32 val; + + /* Rx stats */ + RMON_UPDATE(mac, RxOctetsTotalOK, RxOctetsOK); + RMON_UPDATE(mac, RxOctetsBad, RxOctetsBad); + RMON_UPDATE(mac, RxUCPkts, RxUnicastFramesOK); + RMON_UPDATE(mac, RxMCPkts, RxMulticastFramesOK); + RMON_UPDATE(mac, RxBCPkts, RxBroadcastFramesOK); + RMON_UPDATE(mac, RxJumboPkts, RxJumboFramesOK); + RMON_UPDATE(mac, RxFCSErrors, RxFCSErrors); + RMON_UPDATE(mac, RxAlignErrors, RxAlignErrors); + RMON_UPDATE(mac, RxLongErrors, RxFrameTooLongErrors); + RMON_UPDATE(mac, RxVeryLongErrors, RxFrameTooLongErrors); + RMON_UPDATE(mac, RxPauseMacControlCounter, RxPauseFrames); + RMON_UPDATE(mac, RxDataErrors, RxDataErrors); + RMON_UPDATE(mac, RxJabberErrors, RxJabberErrors); + RMON_UPDATE(mac, RxRuntErrors, RxRuntErrors); + RMON_UPDATE(mac, RxShortErrors, RxRuntErrors); + RMON_UPDATE(mac, RxSequenceErrors, RxSequenceErrors); + RMON_UPDATE(mac, RxSymbolErrors, RxSymbolErrors); + + /* Tx stats (skip collision stats as we are full-duplex only) */ + RMON_UPDATE(mac, TxOctetsTotalOK, TxOctetsOK); + RMON_UPDATE(mac, TxOctetsBad, TxOctetsBad); + RMON_UPDATE(mac, TxUCPkts, TxUnicastFramesOK); + RMON_UPDATE(mac, TxMCPkts, TxMulticastFramesOK); + RMON_UPDATE(mac, TxBCPkts, TxBroadcastFramesOK); + RMON_UPDATE(mac, TxJumboPkts, TxJumboFramesOK); + RMON_UPDATE(mac, TxPauseFrames, TxPauseFrames); + RMON_UPDATE(mac, TxExcessiveLengthDrop, TxLengthErrors); + RMON_UPDATE(mac, TxUnderrun, TxUnderrun); + RMON_UPDATE(mac, TxCRCErrors, TxFCSErrors); +} + +/* No-op interrupt operation as this MAC does not support interrupts */ +static int mac_intr_op(struct cmac *mac) +{ + return 0; +} + +/* Expect MAC address to be in network byte order. */ +static int mac_set_address(struct cmac *mac, u8 addr[6]) +{ + u32 addr_lo, addr_hi; + + addr_lo = addr[2]; + addr_lo = (addr_lo << 8) | addr[3]; + addr_lo = (addr_lo << 8) | addr[4]; + addr_lo = (addr_lo << 8) | addr[5]; + + addr_hi = addr[0]; + addr_hi = (addr_hi << 8) | addr[1]; + + t1_tpi_write(mac->adapter, MACREG(mac, REG_MACADDR_LOW), addr_lo); + t1_tpi_write(mac->adapter, MACREG(mac, REG_MACADDR_HIGH), addr_hi); + return 0; +} + +static int mac_get_address(struct cmac *mac, u8 addr[6]) +{ + u32 addr_lo, addr_hi; + + t1_tpi_read(mac->adapter, MACREG(mac, REG_MACADDR_LOW), &addr_lo); + t1_tpi_read(mac->adapter, MACREG(mac, REG_MACADDR_HIGH), &addr_hi); + + addr[0] = (u8) (addr_hi >> 8); + addr[1] = (u8) addr_hi; + addr[2] = (u8) (addr_lo >> 24); + addr[3] = (u8) (addr_lo >> 16); + addr[4] = (u8) (addr_lo >> 8); + addr[5] = (u8) addr_lo; + return 0; +} + +/* This is intended to reset a port, not the whole MAC */ +static int mac_reset(struct cmac *mac) +{ + return 0; +} + +static int mac_set_rx_mode(struct cmac *mac, struct t1_rx_mode *rm) +{ + u32 val, new_mode; + adapter_t *adapter = mac->adapter; + u32 addr_lo, addr_hi; + u8 *addr; + + t1_tpi_read(adapter, MACREG(mac, REG_RX_FILTER), &val); + new_mode = val & ~7; + if (!t1_rx_mode_promisc(rm) && mac->instance->version > 0) + new_mode |= 1; /* only set if version > 0 due to erratum */ + if (!t1_rx_mode_promisc(rm) && !t1_rx_mode_allmulti(rm) + && t1_rx_mode_mc_cnt(rm) <= 1) + new_mode |= 2; + if (new_mode != val) + t1_tpi_write(adapter, MACREG(mac, REG_RX_FILTER), new_mode); + switch (t1_rx_mode_mc_cnt(rm)) { + case 0: + t1_tpi_write(adapter, MACREG(mac, REG_MC_ADDR_LOW), 0); + t1_tpi_write(adapter, MACREG(mac, REG_MC_ADDR_HIGH), 0); + break; + case 1: + addr = t1_get_next_mcaddr(rm); + addr_lo = (addr[2] << 24) | (addr[3] << 16) | (addr[4] << 8) | + addr[5]; + addr_hi = (addr[0] << 8) | addr[1]; + t1_tpi_write(adapter, MACREG(mac, REG_MC_ADDR_LOW), addr_lo); + t1_tpi_write(adapter, MACREG(mac, REG_MC_ADDR_HIGH), addr_hi); + break; + default: + break; + } + return 0; +} + +static int mac_set_mtu(struct cmac *mac, int mtu) +{ + /* MAX_FRAME_SIZE inludes header + FCS, mtu doesn't */ + if (mtu > (MAX_FRAME_SIZE - 14 - 4)) return -EINVAL; + t1_tpi_write(mac->adapter, MACREG(mac, REG_MAX_FRAME_SIZE), + mtu + 14 + 4); + return 0; +} + +static int mac_set_speed_duplex_fc(struct cmac *mac, int speed, int duplex, + int fc) +{ + u32 val; + + if (speed >= 0 && speed != SPEED_100 && speed != SPEED_1000) + return -1; + if (duplex >= 0 && duplex != DUPLEX_FULL) + return -1; + + if (speed >= 0) { + val = speed == SPEED_100 ? 1 : 2; + t1_tpi_write(mac->adapter, MACREG(mac, REG_RGMII_SPEED), val); + } + + t1_tpi_read(mac->adapter, MACREG(mac, REG_FC_ENABLE), &val); + val &= ~3; + if (fc & PAUSE_RX) + val |= 1; + if (fc & PAUSE_TX) + val |= 2; + t1_tpi_write(mac->adapter, MACREG(mac, REG_FC_ENABLE), val); + return 0; +} + +static int mac_get_speed_duplex_fc(struct cmac *mac, int *speed, int *duplex, + int *fc) +{ + u32 val; + + if (duplex) + *duplex = DUPLEX_FULL; + if (speed) { + t1_tpi_read(mac->adapter, MACREG(mac, REG_RGMII_SPEED), + &val); + *speed = (val & 2) ? SPEED_1000 : SPEED_100; + } + if (fc) { + t1_tpi_read(mac->adapter, MACREG(mac, REG_FC_ENABLE), &val); + *fc = 0; + if (val & 1) + *fc |= PAUSE_RX; + if (val & 2) + *fc |= PAUSE_TX; + } + return 0; +} + +static void enable_port(struct cmac *mac) +{ + u32 val; + u32 index = mac->instance->index; + adapter_t *adapter = mac->adapter; + + t1_tpi_read(adapter, MACREG(mac, REG_DIVERSE_CONFIG), &val); + val |= DIVERSE_CONFIG_CRC_ADD | DIVERSE_CONFIG_PAD_ENABLE; + t1_tpi_write(adapter, MACREG(mac, REG_DIVERSE_CONFIG), val); + if (mac->instance->version > 0) + t1_tpi_write(adapter, MACREG(mac, REG_RX_FILTER), 3); + else /* Don't enable unicast address filtering due to IXF1010 bug */ + t1_tpi_write(adapter, MACREG(mac, REG_RX_FILTER), 2); + + t1_tpi_read(adapter, REG_RX_ERR_DROP, &val); + val |= (1 << index); + t1_tpi_write(adapter, REG_RX_ERR_DROP, val); + + /* + * Clear the port RMON registers by adding their current values to the + * cumulatice port stats and then clearing the stats. Really. + */ + port_stats_update(mac); + memset(&mac->stats, 0, sizeof(struct cmac_statistics)); + mac->instance->ticks = 0; + + t1_tpi_read(adapter, REG_PORT_ENABLE, &val); + val |= (1 << index); + t1_tpi_write(adapter, REG_PORT_ENABLE, val); + + index <<= 2; + if (is_T2(adapter)) { + /* T204: set the Fifo water level & threshold */ + t1_tpi_write(adapter, RX_FIFO_HIGH_WATERMARK_BASE + index, 0x740); + t1_tpi_write(adapter, RX_FIFO_LOW_WATERMARK_BASE + index, 0x730); + t1_tpi_write(adapter, TX_FIFO_HIGH_WATERMARK_BASE + index, 0x600); + t1_tpi_write(adapter, TX_FIFO_LOW_WATERMARK_BASE + index, 0x1d0); + t1_tpi_write(adapter, TX_FIFO_XFER_THRES_BASE + index, 0x1100); + } else { + /* + * Set the TX Fifo Threshold to 0x400 instead of 0x100 to work around + * Underrun problem. Intel has blessed this solution. + */ + t1_tpi_write(adapter, TX_FIFO_XFER_THRES_BASE + index, 0x400); + } +} + +/* IXF1010 ports do not have separate enables for TX and RX */ +static int mac_enable(struct cmac *mac, int which) +{ + if (which & (MAC_DIRECTION_RX | MAC_DIRECTION_TX)) + enable_port(mac); + return 0; +} + +static int mac_disable(struct cmac *mac, int which) +{ + if (which & (MAC_DIRECTION_RX | MAC_DIRECTION_TX)) + disable_port(mac); + return 0; +} + +/* + * This function is called periodically to accumulate the current values of the + * RMON counters into the port statistics. Since the counters are only 32 bits + * some of them can overflow in less than a minute at GigE speeds, so this + * function should be called every 30 seconds or so. + * + * To cut down on reading costs we update only the octet counters at each tick + * and do a full update at major ticks, which can be every 30 minutes or more. + */ +static const struct cmac_statistics *mac_update_statistics(struct cmac *mac, + int flag) +{ + if (flag == MAC_STATS_UPDATE_FULL || + MAJOR_UPDATE_TICKS <= mac->instance->ticks) { + port_stats_update(mac); + mac->instance->ticks = 0; + } else { + u32 val; + + RMON_UPDATE(mac, RxOctetsTotalOK, RxOctetsOK); + RMON_UPDATE(mac, TxOctetsTotalOK, TxOctetsOK); + mac->instance->ticks++; + } + return &mac->stats; +} + +static void mac_destroy(struct cmac *mac) +{ + kfree(mac); +} + +static struct cmac_ops ixf1010_ops = { + .destroy = mac_destroy, + .reset = mac_reset, + .interrupt_enable = mac_intr_op, + .interrupt_disable = mac_intr_op, + .interrupt_clear = mac_intr_op, + .enable = mac_enable, + .disable = mac_disable, + .set_mtu = mac_set_mtu, + .set_rx_mode = mac_set_rx_mode, + .set_speed_duplex_fc = mac_set_speed_duplex_fc, + .get_speed_duplex_fc = mac_get_speed_duplex_fc, + .statistics_update = mac_update_statistics, + .macaddress_get = mac_get_address, + .macaddress_set = mac_set_address, +}; + +static int ixf1010_mac_reset(adapter_t *adapter) +{ + u32 val; + + t1_tpi_read(adapter, A_ELMER0_GPO, &val); + if ((val & 1) != 0) { + val &= ~1; + t1_tpi_write(adapter, A_ELMER0_GPO, val); + udelay(2); + } + val |= 1; + t1_tpi_write(adapter, A_ELMER0_GPO, val); + udelay(2); + + t1_tpi_write(adapter, REG_PORT_ENABLE, 0); + return 0; +} + +static struct cmac *ixf1010_mac_create(adapter_t *adapter, int index) +{ + struct cmac *mac; + u32 val; + + if (index > 9) return NULL; + + mac = kzalloc(sizeof(*mac) + sizeof(cmac_instance), GFP_KERNEL); + if (!mac) return NULL; + + mac->ops = &ixf1010_ops; + mac->instance = (cmac_instance *)(mac + 1); + + mac->instance->mac_base = MACREG_BASE + (index * 0x200); + mac->instance->index = index; + mac->adapter = adapter; + mac->instance->ticks = 0; + + t1_tpi_read(adapter, REG_JTAG_ID, &val); + mac->instance->version = val >> 28; + return mac; +} + +struct gmac t1_ixf1010_ops = { + STATS_TICK_SECS, + ixf1010_mac_create, + ixf1010_mac_reset +}; diff --git a/drivers/net/chelsio/mac.c b/drivers/net/chelsio/mac.c new file mode 100644 index 00000000000..6af39dc7045 --- /dev/null +++ b/drivers/net/chelsio/mac.c @@ -0,0 +1,368 @@ +/* $Date: 2005/10/22 00:42:59 $ $RCSfile: mac.c,v $ $Revision: 1.32 $ */ +#include "gmac.h" +#include "regs.h" +#include "fpga_defs.h" + +#define MAC_CSR_INTERFACE_GMII 0x0 +#define MAC_CSR_INTERFACE_TBI 0x1 +#define MAC_CSR_INTERFACE_MII 0x2 +#define MAC_CSR_INTERFACE_RMII 0x3 + +/* Chelsio's MAC statistics. */ +struct mac_statistics { + + /* Transmit */ + u32 TxFramesTransmittedOK; + u32 TxReserved1; + u32 TxReserved2; + u32 TxOctetsTransmittedOK; + u32 TxFramesWithDeferredXmissions; + u32 TxLateCollisions; + u32 TxFramesAbortedDueToXSCollisions; + u32 TxFramesLostDueToIntMACXmitError; + u32 TxReserved3; + u32 TxMulticastFrameXmittedOK; + u32 TxBroadcastFramesXmittedOK; + u32 TxFramesWithExcessiveDeferral; + u32 TxPAUSEMACCtrlFramesTransmitted; + + /* Receive */ + u32 RxFramesReceivedOK; + u32 RxFrameCheckSequenceErrors; + u32 RxAlignmentErrors; + u32 RxOctetsReceivedOK; + u32 RxFramesLostDueToIntMACRcvError; + u32 RxMulticastFramesReceivedOK; + u32 RxBroadcastFramesReceivedOK; + u32 RxInRangeLengthErrors; + u32 RxTxOutOfRangeLengthField; + u32 RxFrameTooLongErrors; + u32 RxPAUSEMACCtrlFramesReceived; +}; + +static int static_aPorts[] = { + FPGA_GMAC_INTERRUPT_PORT0, + FPGA_GMAC_INTERRUPT_PORT1, + FPGA_GMAC_INTERRUPT_PORT2, + FPGA_GMAC_INTERRUPT_PORT3 +}; + +struct _cmac_instance { + u32 index; +}; + +static int mac_intr_enable(struct cmac *mac) +{ + u32 mac_intr; + + if (t1_is_asic(mac->adapter)) { + /* ASIC */ + + /* We don't use the on chip MAC for ASIC products. */ + } else { + /* FPGA */ + + /* Set parent gmac interrupt. */ + mac_intr = readl(mac->adapter->regs + A_PL_ENABLE); + mac_intr |= FPGA_PCIX_INTERRUPT_GMAC; + writel(mac_intr, mac->adapter->regs + A_PL_ENABLE); + + mac_intr = readl(mac->adapter->regs + FPGA_GMAC_ADDR_INTERRUPT_ENABLE); + mac_intr |= static_aPorts[mac->instance->index]; + writel(mac_intr, + mac->adapter->regs + FPGA_GMAC_ADDR_INTERRUPT_ENABLE); + } + + return 0; +} + +static int mac_intr_disable(struct cmac *mac) +{ + u32 mac_intr; + + if (t1_is_asic(mac->adapter)) { + /* ASIC */ + + /* We don't use the on chip MAC for ASIC products. */ + } else { + /* FPGA */ + + /* Set parent gmac interrupt. */ + mac_intr = readl(mac->adapter->regs + A_PL_ENABLE); + mac_intr &= ~FPGA_PCIX_INTERRUPT_GMAC; + writel(mac_intr, mac->adapter->regs + A_PL_ENABLE); + + mac_intr = readl(mac->adapter->regs + FPGA_GMAC_ADDR_INTERRUPT_ENABLE); + mac_intr &= ~(static_aPorts[mac->instance->index]); + writel(mac_intr, + mac->adapter->regs + FPGA_GMAC_ADDR_INTERRUPT_ENABLE); + } + + return 0; +} + +static int mac_intr_clear(struct cmac *mac) +{ + u32 mac_intr; + + if (t1_is_asic(mac->adapter)) { + /* ASIC */ + + /* We don't use the on chip MAC for ASIC products. */ + } else { + /* FPGA */ + + /* Set parent gmac interrupt. */ + writel(FPGA_PCIX_INTERRUPT_GMAC, + mac->adapter->regs + A_PL_CAUSE); + mac_intr = readl(mac->adapter->regs + FPGA_GMAC_ADDR_INTERRUPT_CAUSE); + mac_intr |= (static_aPorts[mac->instance->index]); + writel(mac_intr, + mac->adapter->regs + FPGA_GMAC_ADDR_INTERRUPT_CAUSE); + } + + return 0; +} + +static int mac_get_address(struct cmac *mac, u8 addr[6]) +{ + u32 data32_lo, data32_hi; + + data32_lo = readl(mac->adapter->regs + + MAC_REG_IDLO(mac->instance->index)); + data32_hi = readl(mac->adapter->regs + + MAC_REG_IDHI(mac->instance->index)); + + addr[0] = (u8) ((data32_hi >> 8) & 0xFF); + addr[1] = (u8) ((data32_hi) & 0xFF); + addr[2] = (u8) ((data32_lo >> 24) & 0xFF); + addr[3] = (u8) ((data32_lo >> 16) & 0xFF); + addr[4] = (u8) ((data32_lo >> 8) & 0xFF); + addr[5] = (u8) ((data32_lo) & 0xFF); + return 0; +} + +static int mac_reset(struct cmac *mac) +{ + u32 data32; + int mac_in_reset, time_out = 100; + int idx = mac->instance->index; + + data32 = readl(mac->adapter->regs + MAC_REG_CSR(idx)); + writel(data32 | F_MAC_RESET, + mac->adapter->regs + MAC_REG_CSR(idx)); + + do { + data32 = readl(mac->adapter->regs + MAC_REG_CSR(idx)); + + mac_in_reset = data32 & F_MAC_RESET; + if (mac_in_reset) + udelay(1); + } while (mac_in_reset && --time_out); + + if (mac_in_reset) { + CH_ERR("%s: MAC %d reset timed out\n", + mac->adapter->name, idx); + return 2; + } + + return 0; +} + +static int mac_set_rx_mode(struct cmac *mac, struct t1_rx_mode *rm) +{ + u32 val; + + val = readl(mac->adapter->regs + + MAC_REG_CSR(mac->instance->index)); + val &= ~(F_MAC_PROMISC | F_MAC_MC_ENABLE); + val |= V_MAC_PROMISC(t1_rx_mode_promisc(rm) != 0); + val |= V_MAC_MC_ENABLE(t1_rx_mode_allmulti(rm) != 0); + writel(val, + mac->adapter->regs + MAC_REG_CSR(mac->instance->index)); + + return 0; +} + +static int mac_set_speed_duplex_fc(struct cmac *mac, int speed, int duplex, + int fc) +{ + u32 data32; + + data32 = readl(mac->adapter->regs + + MAC_REG_CSR(mac->instance->index)); + data32 &= ~(F_MAC_HALF_DUPLEX | V_MAC_SPEED(M_MAC_SPEED) | + V_INTERFACE(M_INTERFACE) | F_MAC_TX_PAUSE_ENABLE | + F_MAC_RX_PAUSE_ENABLE); + + switch (speed) { + case SPEED_10: + case SPEED_100: + data32 |= V_INTERFACE(MAC_CSR_INTERFACE_MII); + data32 |= V_MAC_SPEED(speed == SPEED_10 ? 0 : 1); + break; + case SPEED_1000: + data32 |= V_INTERFACE(MAC_CSR_INTERFACE_GMII); + data32 |= V_MAC_SPEED(2); + break; + } + + if (duplex >= 0) + data32 |= V_MAC_HALF_DUPLEX(duplex == DUPLEX_HALF); + + if (fc >= 0) { + data32 |= V_MAC_RX_PAUSE_ENABLE((fc & PAUSE_RX) != 0); + data32 |= V_MAC_TX_PAUSE_ENABLE((fc & PAUSE_TX) != 0); + } + + writel(data32, + mac->adapter->regs + MAC_REG_CSR(mac->instance->index)); + return 0; +} + +static int mac_enable(struct cmac *mac, int which) +{ + u32 val; + + val = readl(mac->adapter->regs + + MAC_REG_CSR(mac->instance->index)); + if (which & MAC_DIRECTION_RX) + val |= F_MAC_RX_ENABLE; + if (which & MAC_DIRECTION_TX) + val |= F_MAC_TX_ENABLE; + writel(val, + mac->adapter->regs + MAC_REG_CSR(mac->instance->index)); + return 0; +} + +static int mac_disable(struct cmac *mac, int which) +{ + u32 val; + + val = readl(mac->adapter->regs + + MAC_REG_CSR(mac->instance->index)); + if (which & MAC_DIRECTION_RX) + val &= ~F_MAC_RX_ENABLE; + if (which & MAC_DIRECTION_TX) + val &= ~F_MAC_TX_ENABLE; + writel(val, + mac->adapter->regs + MAC_REG_CSR(mac->instance->index)); + return 0; +} + +#if 0 +static int mac_set_ifs(struct cmac *mac, u32 mode) +{ + t1_write_reg_4(mac->adapter, + MAC_REG_IFS(mac->instance->index), + mode); + return 0; +} + +static int mac_enable_isl(struct cmac *mac) +{ + u32 data32 = readl(mac->adapter->regs + + MAC_REG_CSR(mac->instance->index)); + data32 |= F_MAC_RX_ENABLE | F_MAC_TX_ENABLE; + t1_write_reg_4(mac->adapter, + MAC_REG_CSR(mac->instance->index), + data32); + return 0; +} +#endif + +static int mac_set_mtu(struct cmac *mac, int mtu) +{ + if (mtu > 9600) + return -EINVAL; + writel(mtu + ETH_HLEN + VLAN_HLEN, + mac->adapter->regs + MAC_REG_LARGEFRAMELENGTH(mac->instance->index)); + + return 0; +} + +static const struct cmac_statistics *mac_update_statistics(struct cmac *mac, + int flag) +{ + struct mac_statistics st; + u32 *p = (u32 *) & st, i; + + writel(0, + mac->adapter->regs + MAC_REG_RMCNT(mac->instance->index)); + + for (i = 0; i < sizeof(st) / sizeof(u32); i++) + *p++ = readl(mac->adapter->regs + + MAC_REG_RMDATA(mac->instance->index)); + + /* XXX convert stats */ + return &mac->stats; +} + +static void mac_destroy(struct cmac *mac) +{ + kfree(mac); +} + +static struct cmac_ops chelsio_mac_ops = { + .destroy = mac_destroy, + .reset = mac_reset, + .interrupt_enable = mac_intr_enable, + .interrupt_disable = mac_intr_disable, + .interrupt_clear = mac_intr_clear, + .enable = mac_enable, + .disable = mac_disable, + .set_mtu = mac_set_mtu, + .set_rx_mode = mac_set_rx_mode, + .set_speed_duplex_fc = mac_set_speed_duplex_fc, + .macaddress_get = mac_get_address, + .statistics_update = mac_update_statistics, +}; + +static struct cmac *mac_create(adapter_t *adapter, int index) +{ + struct cmac *mac; + u32 data32; + + if (index >= 4) + return NULL; + + mac = kzalloc(sizeof(*mac) + sizeof(cmac_instance), GFP_KERNEL); + if (!mac) + return NULL; + + mac->ops = &chelsio_mac_ops; + mac->instance = (cmac_instance *) (mac + 1); + + mac->instance->index = index; + mac->adapter = adapter; + + data32 = readl(adapter->regs + MAC_REG_CSR(mac->instance->index)); + data32 &= ~(F_MAC_RESET | F_MAC_PROMISC | F_MAC_PROMISC | + F_MAC_LB_ENABLE | F_MAC_RX_ENABLE | F_MAC_TX_ENABLE); + data32 |= F_MAC_JUMBO_ENABLE; + writel(data32, adapter->regs + MAC_REG_CSR(mac->instance->index)); + + /* Initialize the random backoff seed. */ + data32 = 0x55aa + (3 * index); + writel(data32, + adapter->regs + MAC_REG_GMRANDBACKOFFSEED(mac->instance->index)); + + /* Check to see if the mac address needs to be set manually. */ + data32 = readl(adapter->regs + MAC_REG_IDLO(mac->instance->index)); + if (data32 == 0 || data32 == 0xffffffff) { + /* + * Add a default MAC address if we can't read one. + */ + writel(0x43FFFFFF - index, + adapter->regs + MAC_REG_IDLO(mac->instance->index)); + writel(0x0007, + adapter->regs + MAC_REG_IDHI(mac->instance->index)); + } + + (void) mac_set_mtu(mac, 1500); + return mac; +} + +struct gmac t1_chelsio_mac_ops = { + .create = mac_create +}; diff --git a/drivers/net/chelsio/mv88e1xxx.c b/drivers/net/chelsio/mv88e1xxx.c new file mode 100644 index 00000000000..28ac93ff7c4 --- /dev/null +++ b/drivers/net/chelsio/mv88e1xxx.c @@ -0,0 +1,397 @@ +/* $Date: 2005/10/24 23:18:13 $ $RCSfile: mv88e1xxx.c,v $ $Revision: 1.49 $ */ +#include "common.h" +#include "mv88e1xxx.h" +#include "cphy.h" +#include "elmer0.h" + +/* MV88E1XXX MDI crossover register values */ +#define CROSSOVER_MDI 0 +#define CROSSOVER_MDIX 1 +#define CROSSOVER_AUTO 3 + +#define INTR_ENABLE_MASK 0x6CA0 + +/* + * Set the bits given by 'bitval' in PHY register 'reg'. + */ +static void mdio_set_bit(struct cphy *cphy, int reg, u32 bitval) +{ + u32 val; + + (void) simple_mdio_read(cphy, reg, &val); + (void) simple_mdio_write(cphy, reg, val | bitval); +} + +/* + * Clear the bits given by 'bitval' in PHY register 'reg'. + */ +static void mdio_clear_bit(struct cphy *cphy, int reg, u32 bitval) +{ + u32 val; + + (void) simple_mdio_read(cphy, reg, &val); + (void) simple_mdio_write(cphy, reg, val & ~bitval); +} + +/* + * NAME: phy_reset + * + * DESC: Reset the given PHY's port. NOTE: This is not a global + * chip reset. + * + * PARAMS: cphy - Pointer to PHY instance data. + * + * RETURN: 0 - Successfull reset. + * -1 - Timeout. + */ +static int mv88e1xxx_reset(struct cphy *cphy, int wait) +{ + u32 ctl; + int time_out = 1000; + + mdio_set_bit(cphy, MII_BMCR, BMCR_RESET); + + do { + (void) simple_mdio_read(cphy, MII_BMCR, &ctl); + ctl &= BMCR_RESET; + if (ctl) + udelay(1); + } while (ctl && --time_out); + + return ctl ? -1 : 0; +} + +static int mv88e1xxx_interrupt_enable(struct cphy *cphy) +{ + /* Enable PHY interrupts. */ + (void) simple_mdio_write(cphy, MV88E1XXX_INTERRUPT_ENABLE_REGISTER, + INTR_ENABLE_MASK); + + /* Enable Marvell interrupts through Elmer0. */ + if (t1_is_asic(cphy->adapter)) { + u32 elmer; + + t1_tpi_read(cphy->adapter, A_ELMER0_INT_ENABLE, &elmer); + elmer |= ELMER0_GP_BIT1; + if (is_T2(cphy->adapter)) { + elmer |= ELMER0_GP_BIT2|ELMER0_GP_BIT3|ELMER0_GP_BIT4; + } + t1_tpi_write(cphy->adapter, A_ELMER0_INT_ENABLE, elmer); + } + return 0; +} + +static int mv88e1xxx_interrupt_disable(struct cphy *cphy) +{ + /* Disable all phy interrupts. */ + (void) simple_mdio_write(cphy, MV88E1XXX_INTERRUPT_ENABLE_REGISTER, 0); + + /* Disable Marvell interrupts through Elmer0. */ + if (t1_is_asic(cphy->adapter)) { + u32 elmer; + + t1_tpi_read(cphy->adapter, A_ELMER0_INT_ENABLE, &elmer); + elmer &= ~ELMER0_GP_BIT1; + if (is_T2(cphy->adapter)) { + elmer &= ~(ELMER0_GP_BIT2|ELMER0_GP_BIT3|ELMER0_GP_BIT4); + } + t1_tpi_write(cphy->adapter, A_ELMER0_INT_ENABLE, elmer); + } + return 0; +} + +static int mv88e1xxx_interrupt_clear(struct cphy *cphy) +{ + u32 elmer; + + /* Clear PHY interrupts by reading the register. */ + (void) simple_mdio_read(cphy, + MV88E1XXX_INTERRUPT_STATUS_REGISTER, &elmer); + + /* Clear Marvell interrupts through Elmer0. */ + if (t1_is_asic(cphy->adapter)) { + t1_tpi_read(cphy->adapter, A_ELMER0_INT_CAUSE, &elmer); + elmer |= ELMER0_GP_BIT1; + if (is_T2(cphy->adapter)) { + elmer |= ELMER0_GP_BIT2|ELMER0_GP_BIT3|ELMER0_GP_BIT4; + } + t1_tpi_write(cphy->adapter, A_ELMER0_INT_CAUSE, elmer); + } + return 0; +} + +/* + * Set the PHY speed and duplex. This also disables auto-negotiation, except + * for 1Gb/s, where auto-negotiation is mandatory. + */ +static int mv88e1xxx_set_speed_duplex(struct cphy *phy, int speed, int duplex) +{ + u32 ctl; + + (void) simple_mdio_read(phy, MII_BMCR, &ctl); + if (speed >= 0) { + ctl &= ~(BMCR_SPEED100 | BMCR_SPEED1000 | BMCR_ANENABLE); + if (speed == SPEED_100) + ctl |= BMCR_SPEED100; + else if (speed == SPEED_1000) + ctl |= BMCR_SPEED1000; + } + if (duplex >= 0) { + ctl &= ~(BMCR_FULLDPLX | BMCR_ANENABLE); + if (duplex == DUPLEX_FULL) + ctl |= BMCR_FULLDPLX; + } + if (ctl & BMCR_SPEED1000) /* auto-negotiation required for 1Gb/s */ + ctl |= BMCR_ANENABLE; + (void) simple_mdio_write(phy, MII_BMCR, ctl); + return 0; +} + +static int mv88e1xxx_crossover_set(struct cphy *cphy, int crossover) +{ + u32 data32; + + (void) simple_mdio_read(cphy, + MV88E1XXX_SPECIFIC_CNTRL_REGISTER, &data32); + data32 &= ~V_PSCR_MDI_XOVER_MODE(M_PSCR_MDI_XOVER_MODE); + data32 |= V_PSCR_MDI_XOVER_MODE(crossover); + (void) simple_mdio_write(cphy, + MV88E1XXX_SPECIFIC_CNTRL_REGISTER, data32); + return 0; +} + +static int mv88e1xxx_autoneg_enable(struct cphy *cphy) +{ + u32 ctl; + + (void) mv88e1xxx_crossover_set(cphy, CROSSOVER_AUTO); + + (void) simple_mdio_read(cphy, MII_BMCR, &ctl); + /* restart autoneg for change to take effect */ + ctl |= BMCR_ANENABLE | BMCR_ANRESTART; + (void) simple_mdio_write(cphy, MII_BMCR, ctl); + return 0; +} + +static int mv88e1xxx_autoneg_disable(struct cphy *cphy) +{ + u32 ctl; + + /* + * Crossover *must* be set to manual in order to disable auto-neg. + * The Alaska FAQs document highlights this point. + */ + (void) mv88e1xxx_crossover_set(cphy, CROSSOVER_MDI); + + /* + * Must include autoneg reset when disabling auto-neg. This + * is described in the Alaska FAQ document. + */ + (void) simple_mdio_read(cphy, MII_BMCR, &ctl); + ctl &= ~BMCR_ANENABLE; + (void) simple_mdio_write(cphy, MII_BMCR, ctl | BMCR_ANRESTART); + return 0; +} + +static int mv88e1xxx_autoneg_restart(struct cphy *cphy) +{ + mdio_set_bit(cphy, MII_BMCR, BMCR_ANRESTART); + return 0; +} + +static int mv88e1xxx_advertise(struct cphy *phy, unsigned int advertise_map) +{ + u32 val = 0; + + if (advertise_map & + (ADVERTISED_1000baseT_Half | ADVERTISED_1000baseT_Full)) { + (void) simple_mdio_read(phy, MII_GBCR, &val); + val &= ~(GBCR_ADV_1000HALF | GBCR_ADV_1000FULL); + if (advertise_map & ADVERTISED_1000baseT_Half) + val |= GBCR_ADV_1000HALF; + if (advertise_map & ADVERTISED_1000baseT_Full) + val |= GBCR_ADV_1000FULL; + } + (void) simple_mdio_write(phy, MII_GBCR, val); + + val = 1; + if (advertise_map & ADVERTISED_10baseT_Half) + val |= ADVERTISE_10HALF; + if (advertise_map & ADVERTISED_10baseT_Full) + val |= ADVERTISE_10FULL; + if (advertise_map & ADVERTISED_100baseT_Half) + val |= ADVERTISE_100HALF; + if (advertise_map & ADVERTISED_100baseT_Full) + val |= ADVERTISE_100FULL; + if (advertise_map & ADVERTISED_PAUSE) + val |= ADVERTISE_PAUSE; + if (advertise_map & ADVERTISED_ASYM_PAUSE) + val |= ADVERTISE_PAUSE_ASYM; + (void) simple_mdio_write(phy, MII_ADVERTISE, val); + return 0; +} + +static int mv88e1xxx_set_loopback(struct cphy *cphy, int on) +{ + if (on) + mdio_set_bit(cphy, MII_BMCR, BMCR_LOOPBACK); + else + mdio_clear_bit(cphy, MII_BMCR, BMCR_LOOPBACK); + return 0; +} + +static int mv88e1xxx_get_link_status(struct cphy *cphy, int *link_ok, + int *speed, int *duplex, int *fc) +{ + u32 status; + int sp = -1, dplx = -1, pause = 0; + + (void) simple_mdio_read(cphy, + MV88E1XXX_SPECIFIC_STATUS_REGISTER, &status); + if ((status & V_PSSR_STATUS_RESOLVED) != 0) { + if (status & V_PSSR_RX_PAUSE) + pause |= PAUSE_RX; + if (status & V_PSSR_TX_PAUSE) + pause |= PAUSE_TX; + dplx = (status & V_PSSR_DUPLEX) ? DUPLEX_FULL : DUPLEX_HALF; + sp = G_PSSR_SPEED(status); + if (sp == 0) + sp = SPEED_10; + else if (sp == 1) + sp = SPEED_100; + else + sp = SPEED_1000; + } + if (link_ok) + *link_ok = (status & V_PSSR_LINK) != 0; + if (speed) + *speed = sp; + if (duplex) + *duplex = dplx; + if (fc) + *fc = pause; + return 0; +} + +static int mv88e1xxx_downshift_set(struct cphy *cphy, int downshift_enable) +{ + u32 val; + + (void) simple_mdio_read(cphy, + MV88E1XXX_EXT_PHY_SPECIFIC_CNTRL_REGISTER, &val); + + /* + * Set the downshift counter to 2 so we try to establish Gb link + * twice before downshifting. + */ + val &= ~(V_DOWNSHIFT_ENABLE | V_DOWNSHIFT_CNT(M_DOWNSHIFT_CNT)); + + if (downshift_enable) + val |= V_DOWNSHIFT_ENABLE | V_DOWNSHIFT_CNT(2); + (void) simple_mdio_write(cphy, + MV88E1XXX_EXT_PHY_SPECIFIC_CNTRL_REGISTER, val); + return 0; +} + +static int mv88e1xxx_interrupt_handler(struct cphy *cphy) +{ + int cphy_cause = 0; + u32 status; + + /* + * Loop until cause reads zero. Need to handle bouncing interrupts. + */ + while (1) { + u32 cause; + + (void) simple_mdio_read(cphy, + MV88E1XXX_INTERRUPT_STATUS_REGISTER, + &cause); + cause &= INTR_ENABLE_MASK; + if (!cause) break; + + if (cause & MV88E1XXX_INTR_LINK_CHNG) { + (void) simple_mdio_read(cphy, + MV88E1XXX_SPECIFIC_STATUS_REGISTER, &status); + + if (status & MV88E1XXX_INTR_LINK_CHNG) { + cphy->state |= PHY_LINK_UP; + } else { + cphy->state &= ~PHY_LINK_UP; + if (cphy->state & PHY_AUTONEG_EN) + cphy->state &= ~PHY_AUTONEG_RDY; + cphy_cause |= cphy_cause_link_change; + } + } + + if (cause & MV88E1XXX_INTR_AUTONEG_DONE) + cphy->state |= PHY_AUTONEG_RDY; + + if ((cphy->state & (PHY_LINK_UP | PHY_AUTONEG_RDY)) == + (PHY_LINK_UP | PHY_AUTONEG_RDY)) + cphy_cause |= cphy_cause_link_change; + } + return cphy_cause; +} + +static void mv88e1xxx_destroy(struct cphy *cphy) +{ + kfree(cphy); +} + +static struct cphy_ops mv88e1xxx_ops = { + .destroy = mv88e1xxx_destroy, + .reset = mv88e1xxx_reset, + .interrupt_enable = mv88e1xxx_interrupt_enable, + .interrupt_disable = mv88e1xxx_interrupt_disable, + .interrupt_clear = mv88e1xxx_interrupt_clear, + .interrupt_handler = mv88e1xxx_interrupt_handler, + .autoneg_enable = mv88e1xxx_autoneg_enable, + .autoneg_disable = mv88e1xxx_autoneg_disable, + .autoneg_restart = mv88e1xxx_autoneg_restart, + .advertise = mv88e1xxx_advertise, + .set_loopback = mv88e1xxx_set_loopback, + .set_speed_duplex = mv88e1xxx_set_speed_duplex, + .get_link_status = mv88e1xxx_get_link_status, +}; + +static struct cphy *mv88e1xxx_phy_create(adapter_t *adapter, int phy_addr, + struct mdio_ops *mdio_ops) +{ + struct cphy *cphy = kzalloc(sizeof(*cphy), GFP_KERNEL); + + if (!cphy) return NULL; + + cphy_init(cphy, adapter, phy_addr, &mv88e1xxx_ops, mdio_ops); + + /* Configure particular PHY's to run in a different mode. */ + if ((board_info(adapter)->caps & SUPPORTED_TP) && + board_info(adapter)->chip_phy == CHBT_PHY_88E1111) { + /* + * Configure the PHY transmitter as class A to reduce EMI. + */ + (void) simple_mdio_write(cphy, + MV88E1XXX_EXTENDED_ADDR_REGISTER, 0xB); + (void) simple_mdio_write(cphy, + MV88E1XXX_EXTENDED_REGISTER, 0x8004); + } + (void) mv88e1xxx_downshift_set(cphy, 1); /* Enable downshift */ + + /* LED */ + if (is_T2(adapter)) { + (void) simple_mdio_write(cphy, + MV88E1XXX_LED_CONTROL_REGISTER, 0x1); + } + + return cphy; +} + +static int mv88e1xxx_phy_reset(adapter_t* adapter) +{ + return 0; +} + +struct gphy t1_mv88e1xxx_ops = { + mv88e1xxx_phy_create, + mv88e1xxx_phy_reset +}; diff --git a/drivers/net/chelsio/mv88e1xxx.h b/drivers/net/chelsio/mv88e1xxx.h new file mode 100644 index 00000000000..967cc428635 --- /dev/null +++ b/drivers/net/chelsio/mv88e1xxx.h @@ -0,0 +1,127 @@ +/* $Date: 2005/03/07 23:59:05 $ $RCSfile: mv88e1xxx.h,v $ $Revision: 1.13 $ */ +#ifndef CHELSIO_MV8E1XXX_H +#define CHELSIO_MV8E1XXX_H + +#ifndef BMCR_SPEED1000 +# define BMCR_SPEED1000 0x40 +#endif + +#ifndef ADVERTISE_PAUSE +# define ADVERTISE_PAUSE 0x400 +#endif +#ifndef ADVERTISE_PAUSE_ASYM +# define ADVERTISE_PAUSE_ASYM 0x800 +#endif + +/* Gigabit MII registers */ +#define MII_GBCR 9 /* 1000Base-T control register */ +#define MII_GBSR 10 /* 1000Base-T status register */ + +/* 1000Base-T control register fields */ +#define GBCR_ADV_1000HALF 0x100 +#define GBCR_ADV_1000FULL 0x200 +#define GBCR_PREFER_MASTER 0x400 +#define GBCR_MANUAL_AS_MASTER 0x800 +#define GBCR_MANUAL_CONFIG_ENABLE 0x1000 + +/* 1000Base-T status register fields */ +#define GBSR_LP_1000HALF 0x400 +#define GBSR_LP_1000FULL 0x800 +#define GBSR_REMOTE_OK 0x1000 +#define GBSR_LOCAL_OK 0x2000 +#define GBSR_LOCAL_MASTER 0x4000 +#define GBSR_MASTER_FAULT 0x8000 + +/* Marvell PHY interrupt status bits. */ +#define MV88E1XXX_INTR_JABBER 0x0001 +#define MV88E1XXX_INTR_POLARITY_CHNG 0x0002 +#define MV88E1XXX_INTR_ENG_DETECT_CHNG 0x0010 +#define MV88E1XXX_INTR_DOWNSHIFT 0x0020 +#define MV88E1XXX_INTR_MDI_XOVER_CHNG 0x0040 +#define MV88E1XXX_INTR_FIFO_OVER_UNDER 0x0080 +#define MV88E1XXX_INTR_FALSE_CARRIER 0x0100 +#define MV88E1XXX_INTR_SYMBOL_ERROR 0x0200 +#define MV88E1XXX_INTR_LINK_CHNG 0x0400 +#define MV88E1XXX_INTR_AUTONEG_DONE 0x0800 +#define MV88E1XXX_INTR_PAGE_RECV 0x1000 +#define MV88E1XXX_INTR_DUPLEX_CHNG 0x2000 +#define MV88E1XXX_INTR_SPEED_CHNG 0x4000 +#define MV88E1XXX_INTR_AUTONEG_ERR 0x8000 + +/* Marvell PHY specific registers. */ +#define MV88E1XXX_SPECIFIC_CNTRL_REGISTER 16 +#define MV88E1XXX_SPECIFIC_STATUS_REGISTER 17 +#define MV88E1XXX_INTERRUPT_ENABLE_REGISTER 18 +#define MV88E1XXX_INTERRUPT_STATUS_REGISTER 19 +#define MV88E1XXX_EXT_PHY_SPECIFIC_CNTRL_REGISTER 20 +#define MV88E1XXX_RECV_ERR_CNTR_REGISTER 21 +#define MV88E1XXX_RES_REGISTER 22 +#define MV88E1XXX_GLOBAL_STATUS_REGISTER 23 +#define MV88E1XXX_LED_CONTROL_REGISTER 24 +#define MV88E1XXX_MANUAL_LED_OVERRIDE_REGISTER 25 +#define MV88E1XXX_EXT_PHY_SPECIFIC_CNTRL_2_REGISTER 26 +#define MV88E1XXX_EXT_PHY_SPECIFIC_STATUS_REGISTER 27 +#define MV88E1XXX_VIRTUAL_CABLE_TESTER_REGISTER 28 +#define MV88E1XXX_EXTENDED_ADDR_REGISTER 29 +#define MV88E1XXX_EXTENDED_REGISTER 30 + +/* PHY specific control register fields */ +#define S_PSCR_MDI_XOVER_MODE 5 +#define M_PSCR_MDI_XOVER_MODE 0x3 +#define V_PSCR_MDI_XOVER_MODE(x) ((x) << S_PSCR_MDI_XOVER_MODE) +#define G_PSCR_MDI_XOVER_MODE(x) (((x) >> S_PSCR_MDI_XOVER_MODE) & M_PSCR_MDI_XOVER_MODE) + +/* Extended PHY specific control register fields */ +#define S_DOWNSHIFT_ENABLE 8 +#define V_DOWNSHIFT_ENABLE (1 << S_DOWNSHIFT_ENABLE) + +#define S_DOWNSHIFT_CNT 9 +#define M_DOWNSHIFT_CNT 0x7 +#define V_DOWNSHIFT_CNT(x) ((x) << S_DOWNSHIFT_CNT) +#define G_DOWNSHIFT_CNT(x) (((x) >> S_DOWNSHIFT_CNT) & M_DOWNSHIFT_CNT) + +/* PHY specific status register fields */ +#define S_PSSR_JABBER 0 +#define V_PSSR_JABBER (1 << S_PSSR_JABBER) + +#define S_PSSR_POLARITY 1 +#define V_PSSR_POLARITY (1 << S_PSSR_POLARITY) + +#define S_PSSR_RX_PAUSE 2 +#define V_PSSR_RX_PAUSE (1 << S_PSSR_RX_PAUSE) + +#define S_PSSR_TX_PAUSE 3 +#define V_PSSR_TX_PAUSE (1 << S_PSSR_TX_PAUSE) + +#define S_PSSR_ENERGY_DETECT 4 +#define V_PSSR_ENERGY_DETECT (1 << S_PSSR_ENERGY_DETECT) + +#define S_PSSR_DOWNSHIFT_STATUS 5 +#define V_PSSR_DOWNSHIFT_STATUS (1 << S_PSSR_DOWNSHIFT_STATUS) + +#define S_PSSR_MDI 6 +#define V_PSSR_MDI (1 << S_PSSR_MDI) + +#define S_PSSR_CABLE_LEN 7 +#define M_PSSR_CABLE_LEN 0x7 +#define V_PSSR_CABLE_LEN(x) ((x) << S_PSSR_CABLE_LEN) +#define G_PSSR_CABLE_LEN(x) (((x) >> S_PSSR_CABLE_LEN) & M_PSSR_CABLE_LEN) + +#define S_PSSR_LINK 10 +#define V_PSSR_LINK (1 << S_PSSR_LINK) + +#define S_PSSR_STATUS_RESOLVED 11 +#define V_PSSR_STATUS_RESOLVED (1 << S_PSSR_STATUS_RESOLVED) + +#define S_PSSR_PAGE_RECEIVED 12 +#define V_PSSR_PAGE_RECEIVED (1 << S_PSSR_PAGE_RECEIVED) + +#define S_PSSR_DUPLEX 13 +#define V_PSSR_DUPLEX (1 << S_PSSR_DUPLEX) + +#define S_PSSR_SPEED 14 +#define M_PSSR_SPEED 0x3 +#define V_PSSR_SPEED(x) ((x) << S_PSSR_SPEED) +#define G_PSSR_SPEED(x) (((x) >> S_PSSR_SPEED) & M_PSSR_SPEED) + +#endif diff --git a/drivers/net/chelsio/mv88x201x.c b/drivers/net/chelsio/mv88x201x.c index db503428278..c8e89480d90 100644 --- a/drivers/net/chelsio/mv88x201x.c +++ b/drivers/net/chelsio/mv88x201x.c @@ -85,29 +85,33 @@ static int mv88x201x_reset(struct cphy *cphy, int wait) static int mv88x201x_interrupt_enable(struct cphy *cphy) { - u32 elmer; - /* Enable PHY LASI interrupts. */ mdio_write(cphy, 0x1, 0x9002, 0x1); /* Enable Marvell interrupts through Elmer0. */ - t1_tpi_read(cphy->adapter, A_ELMER0_INT_ENABLE, &elmer); - elmer |= ELMER0_GP_BIT6; - t1_tpi_write(cphy->adapter, A_ELMER0_INT_ENABLE, elmer); + if (t1_is_asic(cphy->adapter)) { + u32 elmer; + + t1_tpi_read(cphy->adapter, A_ELMER0_INT_ENABLE, &elmer); + elmer |= ELMER0_GP_BIT6; + t1_tpi_write(cphy->adapter, A_ELMER0_INT_ENABLE, elmer); + } return 0; } static int mv88x201x_interrupt_disable(struct cphy *cphy) { - u32 elmer; - /* Disable PHY LASI interrupts. */ mdio_write(cphy, 0x1, 0x9002, 0x0); /* Disable Marvell interrupts through Elmer0. */ - t1_tpi_read(cphy->adapter, A_ELMER0_INT_ENABLE, &elmer); - elmer &= ~ELMER0_GP_BIT6; - t1_tpi_write(cphy->adapter, A_ELMER0_INT_ENABLE, elmer); + if (t1_is_asic(cphy->adapter)) { + u32 elmer; + + t1_tpi_read(cphy->adapter, A_ELMER0_INT_ENABLE, &elmer); + elmer &= ~ELMER0_GP_BIT6; + t1_tpi_write(cphy->adapter, A_ELMER0_INT_ENABLE, elmer); + } return 0; } @@ -140,9 +144,11 @@ static int mv88x201x_interrupt_clear(struct cphy *cphy) #endif /* Clear Marvell interrupts through Elmer0. */ - t1_tpi_read(cphy->adapter, A_ELMER0_INT_CAUSE, &elmer); - elmer |= ELMER0_GP_BIT6; - t1_tpi_write(cphy->adapter, A_ELMER0_INT_CAUSE, elmer); + if (t1_is_asic(cphy->adapter)) { + t1_tpi_read(cphy->adapter, A_ELMER0_INT_CAUSE, &elmer); + elmer |= ELMER0_GP_BIT6; + t1_tpi_write(cphy->adapter, A_ELMER0_INT_CAUSE, elmer); + } return 0; } @@ -205,11 +211,11 @@ static struct cphy *mv88x201x_phy_create(adapter_t *adapter, int phy_addr, struct mdio_ops *mdio_ops) { u32 val; - struct cphy *cphy = kmalloc(sizeof(*cphy), GFP_KERNEL); + struct cphy *cphy = kzalloc(sizeof(*cphy), GFP_KERNEL); if (!cphy) return NULL; - memset(cphy, 0, sizeof(*cphy)); + cphy_init(cphy, adapter, phy_addr, &mv88x201x_ops, mdio_ops); /* Commands the PHY to enable XFP's clock. */ diff --git a/drivers/net/chelsio/my3126.c b/drivers/net/chelsio/my3126.c new file mode 100644 index 00000000000..0b90014d5b3 --- /dev/null +++ b/drivers/net/chelsio/my3126.c @@ -0,0 +1,204 @@ +/* $Date: 2005/11/12 02:13:49 $ $RCSfile: my3126.c,v $ $Revision: 1.15 $ */ +#include "cphy.h" +#include "elmer0.h" +#include "suni1x10gexp_regs.h" + +/* Port Reset */ +static int my3126_reset(struct cphy *cphy, int wait) +{ + /* + * This can be done through registers. It is not required since + * a full chip reset is used. + */ + return (0); +} + +static int my3126_interrupt_enable(struct cphy *cphy) +{ + schedule_delayed_work(&cphy->phy_update, HZ/30); + t1_tpi_read(cphy->adapter, A_ELMER0_GPO, &cphy->elmer_gpo); + return (0); +} + +static int my3126_interrupt_disable(struct cphy *cphy) +{ + cancel_rearming_delayed_work(&cphy->phy_update); + return (0); +} + +static int my3126_interrupt_clear(struct cphy *cphy) +{ + return (0); +} + +#define OFFSET(REG_ADDR) (REG_ADDR << 2) + +static int my3126_interrupt_handler(struct cphy *cphy) +{ + u32 val; + u16 val16; + u16 status; + u32 act_count; + adapter_t *adapter; + adapter = cphy->adapter; + + if (cphy->count == 50) { + mdio_read(cphy, 0x1, 0x1, &val); + val16 = (u16) val; + status = cphy->bmsr ^ val16; + + if (status & BMSR_LSTATUS) + t1_link_changed(adapter, 0); + cphy->bmsr = val16; + + /* We have only enabled link change interrupts so it + must be that + */ + cphy->count = 0; + } + + t1_tpi_write(adapter, OFFSET(SUNI1x10GEXP_REG_MSTAT_CONTROL), + SUNI1x10GEXP_BITMSK_MSTAT_SNAP); + t1_tpi_read(adapter, + OFFSET(SUNI1x10GEXP_REG_MSTAT_COUNTER_1_LOW), &act_count); + t1_tpi_read(adapter, + OFFSET(SUNI1x10GEXP_REG_MSTAT_COUNTER_33_LOW), &val); + act_count += val; + + /* Populate elmer_gpo with the register value */ + t1_tpi_read(adapter, A_ELMER0_GPO, &val); + cphy->elmer_gpo = val; + + if ( (val & (1 << 8)) || (val & (1 << 19)) || + (cphy->act_count == act_count) || cphy->act_on ) { + if (is_T2(adapter)) + val |= (1 << 9); + else if (t1_is_T1B(adapter)) + val |= (1 << 20); + cphy->act_on = 0; + } else { + if (is_T2(adapter)) + val &= ~(1 << 9); + else if (t1_is_T1B(adapter)) + val &= ~(1 << 20); + cphy->act_on = 1; + } + + t1_tpi_write(adapter, A_ELMER0_GPO, val); + + cphy->elmer_gpo = val; + cphy->act_count = act_count; + cphy->count++; + + return cphy_cause_link_change; +} + +static void my3216_poll(void *arg) +{ + my3126_interrupt_handler(arg); +} + +static int my3126_set_loopback(struct cphy *cphy, int on) +{ + return (0); +} + +/* To check the activity LED */ +static int my3126_get_link_status(struct cphy *cphy, + int *link_ok, int *speed, int *duplex, int *fc) +{ + u32 val; + u16 val16; + adapter_t *adapter; + + adapter = cphy->adapter; + mdio_read(cphy, 0x1, 0x1, &val); + val16 = (u16) val; + + /* Populate elmer_gpo with the register value */ + t1_tpi_read(adapter, A_ELMER0_GPO, &val); + cphy->elmer_gpo = val; + + *link_ok = (val16 & BMSR_LSTATUS); + + if (*link_ok) { + /* Turn on the LED. */ + if (is_T2(adapter)) + val &= ~(1 << 8); + else if (t1_is_T1B(adapter)) + val &= ~(1 << 19); + } else { + /* Turn off the LED. */ + if (is_T2(adapter)) + val |= (1 << 8); + else if (t1_is_T1B(adapter)) + val |= (1 << 19); + } + + t1_tpi_write(adapter, A_ELMER0_GPO, val); + cphy->elmer_gpo = val; + *speed = SPEED_10000; + *duplex = DUPLEX_FULL; + + /* need to add flow control */ + if (fc) + *fc = PAUSE_RX | PAUSE_TX; + + return (0); +} + +static void my3126_destroy(struct cphy *cphy) +{ + kfree(cphy); +} + +static struct cphy_ops my3126_ops = { + .destroy = my3126_destroy, + .reset = my3126_reset, + .interrupt_enable = my3126_interrupt_enable, + .interrupt_disable = my3126_interrupt_disable, + .interrupt_clear = my3126_interrupt_clear, + .interrupt_handler = my3126_interrupt_handler, + .get_link_status = my3126_get_link_status, + .set_loopback = my3126_set_loopback, +}; + +static struct cphy *my3126_phy_create(adapter_t *adapter, + int phy_addr, struct mdio_ops *mdio_ops) +{ + struct cphy *cphy = kzalloc(sizeof (*cphy), GFP_KERNEL); + + if (cphy) + cphy_init(cphy, adapter, phy_addr, &my3126_ops, mdio_ops); + + INIT_WORK(&cphy->phy_update, my3216_poll, cphy); + cphy->bmsr = 0; + + return (cphy); +} + +/* Chip Reset */ +static int my3126_phy_reset(adapter_t * adapter) +{ + u32 val; + + t1_tpi_read(adapter, A_ELMER0_GPO, &val); + val &= ~4; + t1_tpi_write(adapter, A_ELMER0_GPO, val); + msleep(100); + + t1_tpi_write(adapter, A_ELMER0_GPO, val | 4); + msleep(1000); + + /* Now lets enable the Laser. Delay 100us */ + t1_tpi_read(adapter, A_ELMER0_GPO, &val); + val |= 0x8000; + t1_tpi_write(adapter, A_ELMER0_GPO, val); + udelay(100); + return (0); +} + +struct gphy t1_my3126_ops = { + my3126_phy_create, + my3126_phy_reset +}; diff --git a/drivers/net/chelsio/pm3393.c b/drivers/net/chelsio/pm3393.c index 04a1404fc65..63cabeb98af 100644 --- a/drivers/net/chelsio/pm3393.c +++ b/drivers/net/chelsio/pm3393.c @@ -43,21 +43,7 @@ #include "elmer0.h" #include "suni1x10gexp_regs.h" -/* 802.3ae 10Gb/s MDIO Manageable Device(MMD) - */ -enum { - MMD_RESERVED, - MMD_PMAPMD, - MMD_WIS, - MMD_PCS, - MMD_PHY_XGXS, /* XGMII Extender Sublayer */ - MMD_DTE_XGXS, -}; - -enum { - PHY_XGXS_CTRL_1, - PHY_XGXS_STATUS_1 -}; +#include <linux/crc32.h> #define OFFSET(REG_ADDR) (REG_ADDR << 2) @@ -88,6 +74,8 @@ enum { /* RMON registers */ RxJabbers = SUNI1x10GEXP_REG_MSTAT_COUNTER_16_LOW, RxFragments = SUNI1x10GEXP_REG_MSTAT_COUNTER_17_LOW, RxUndersizedFrames = SUNI1x10GEXP_REG_MSTAT_COUNTER_18_LOW, + RxJumboFramesReceivedOK = SUNI1x10GEXP_REG_MSTAT_COUNTER_25_LOW, + RxJumboOctetsReceivedOK = SUNI1x10GEXP_REG_MSTAT_COUNTER_26_LOW, TxOctetsTransmittedOK = SUNI1x10GEXP_REG_MSTAT_COUNTER_33_LOW, TxFramesLostDueToInternalMACTransmissionError = SUNI1x10GEXP_REG_MSTAT_COUNTER_35_LOW, @@ -95,7 +83,9 @@ enum { /* RMON registers */ TxUnicastFramesTransmittedOK = SUNI1x10GEXP_REG_MSTAT_COUNTER_38_LOW, TxMulticastFramesTransmittedOK = SUNI1x10GEXP_REG_MSTAT_COUNTER_40_LOW, TxBroadcastFramesTransmittedOK = SUNI1x10GEXP_REG_MSTAT_COUNTER_42_LOW, - TxPAUSEMACCtrlFramesTransmitted = SUNI1x10GEXP_REG_MSTAT_COUNTER_43_LOW + TxPAUSEMACCtrlFramesTransmitted = SUNI1x10GEXP_REG_MSTAT_COUNTER_43_LOW, + TxJumboFramesReceivedOK = SUNI1x10GEXP_REG_MSTAT_COUNTER_51_LOW, + TxJumboOctetsReceivedOK = SUNI1x10GEXP_REG_MSTAT_COUNTER_52_LOW }; struct _cmac_instance { @@ -124,12 +114,12 @@ static int pm3393_reset(struct cmac *cmac) /* * Enable interrupts for the PM3393 - - 1. Enable PM3393 BLOCK interrupts. - 2. Enable PM3393 Master Interrupt bit(INTE) - 3. Enable ELMER's PM3393 bit. - 4. Enable Terminator external interrupt. -*/ + * + * 1. Enable PM3393 BLOCK interrupts. + * 2. Enable PM3393 Master Interrupt bit(INTE) + * 3. Enable ELMER's PM3393 bit. + * 4. Enable Terminator external interrupt. + */ static int pm3393_interrupt_enable(struct cmac *cmac) { u32 pl_intr; @@ -257,14 +247,12 @@ static int pm3393_interrupt_clear(struct cmac *cmac) static int pm3393_interrupt_handler(struct cmac *cmac) { u32 master_intr_status; -/* - 1. Read master interrupt register. - 2. Read BLOCK's interrupt status registers. - 3. Handle BLOCK interrupts. -*/ + /* Read the master interrupt status register. */ pmread(cmac, SUNI1x10GEXP_REG_MASTER_INTERRUPT_STATUS, &master_intr_status); + CH_DBG(cmac->adapter, INTR, "PM3393 intr cause 0x%x\n", + master_intr_status); /* TBD XXX Lets just clear everything for now */ pm3393_interrupt_clear(cmac); @@ -307,11 +295,7 @@ static int pm3393_enable_port(struct cmac *cmac, int which) * The PHY doesn't give us link status indication on its own so have * the link management code query it instead. */ - { - extern void link_changed(adapter_t *adapter, int port_id); - - link_changed(cmac->adapter, 0); - } + t1_link_changed(cmac->adapter, 0); return 0; } @@ -363,33 +347,6 @@ static int pm3393_set_mtu(struct cmac *cmac, int mtu) return 0; } -static u32 calc_crc(u8 *b, int len) -{ - int i; - u32 crc = (u32)~0; - - /* calculate crc one bit at a time */ - while (len--) { - crc ^= *b++; - for (i = 0; i < 8; i++) { - if (crc & 0x1) - crc = (crc >> 1) ^ 0xedb88320; - else - crc = (crc >> 1); - } - } - - /* reverse bits */ - crc = ((crc >> 4) & 0x0f0f0f0f) | ((crc << 4) & 0xf0f0f0f0); - crc = ((crc >> 2) & 0x33333333) | ((crc << 2) & 0xcccccccc); - crc = ((crc >> 1) & 0x55555555) | ((crc << 1) & 0xaaaaaaaa); - /* swap bytes */ - crc = (crc >> 16) | (crc << 16); - crc = (crc >> 8 & 0x00ff00ff) | (crc << 8 & 0xff00ff00); - - return crc; -} - static int pm3393_set_rx_mode(struct cmac *cmac, struct t1_rx_mode *rm) { int enabled = cmac->instance->enabled & MAC_DIRECTION_RX; @@ -423,7 +380,7 @@ static int pm3393_set_rx_mode(struct cmac *cmac, struct t1_rx_mode *rm) u16 mc_filter[4] = { 0, }; while ((addr = t1_get_next_mcaddr(rm))) { - bit = (calc_crc(addr, ETH_ALEN) >> 23) & 0x3f; /* bit[23:28] */ + bit = (ether_crc(ETH_ALEN, addr) >> 23) & 0x3f; /* bit[23:28] */ mc_filter[bit >> 4] |= 1 << (bit & 0xf); } pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_LOW, mc_filter[0]); @@ -471,20 +428,29 @@ static int pm3393_set_speed_duplex_fc(struct cmac *cmac, int speed, int duplex, return 0; } +static void pm3393_rmon_update(struct adapter *adapter, u32 offs, u64 *val, + int over) +{ + u32 val0, val1, val2; + + t1_tpi_read(adapter, offs, &val0); + t1_tpi_read(adapter, offs + 4, &val1); + t1_tpi_read(adapter, offs + 8, &val2); + + *val &= ~0ull << 40; + *val |= val0 & 0xffff; + *val |= (val1 & 0xffff) << 16; + *val |= (u64)(val2 & 0xff) << 32; + + if (over) + *val += 1ull << 40; +} + #define RMON_UPDATE(mac, name, stat_name) \ - { \ - t1_tpi_read((mac)->adapter, OFFSET(name), &val0); \ - t1_tpi_read((mac)->adapter, OFFSET(((name)+1)), &val1); \ - t1_tpi_read((mac)->adapter, OFFSET(((name)+2)), &val2); \ - (mac)->stats.stat_name = ((u64)val0 & 0xffff) | \ - (((u64)val1 & 0xffff) << 16) | \ - (((u64)val2 & 0xff) << 32) | \ - ((mac)->stats.stat_name & \ - (~(u64)0 << 40)); \ - if (ro & \ - ((name - SUNI1x10GEXP_REG_MSTAT_COUNTER_0_LOW) >> 2)) \ - (mac)->stats.stat_name += ((u64)1 << 40); \ - } + pm3393_rmon_update((mac)->adapter, OFFSET(name), \ + &(mac)->stats.stat_name, \ + (ro &((name - SUNI1x10GEXP_REG_MSTAT_COUNTER_0_LOW) >> 2))) + static const struct cmac_statistics *pm3393_update_statistics(struct cmac *mac, int flag) @@ -519,6 +485,8 @@ static const struct cmac_statistics *pm3393_update_statistics(struct cmac *mac, RMON_UPDATE(mac, RxJabbers, RxJabberErrors); RMON_UPDATE(mac, RxFragments, RxRuntErrors); RMON_UPDATE(mac, RxUndersizedFrames, RxRuntErrors); + RMON_UPDATE(mac, RxJumboFramesReceivedOK, RxJumboFramesOK); + RMON_UPDATE(mac, RxJumboOctetsReceivedOK, RxJumboOctetsOK); /* Tx stats */ RMON_UPDATE(mac, TxOctetsTransmittedOK, TxOctetsOK); @@ -529,6 +497,8 @@ static const struct cmac_statistics *pm3393_update_statistics(struct cmac *mac, RMON_UPDATE(mac, TxMulticastFramesTransmittedOK, TxMulticastFramesOK); RMON_UPDATE(mac, TxBroadcastFramesTransmittedOK, TxBroadcastFramesOK); RMON_UPDATE(mac, TxPAUSEMACCtrlFramesTransmitted, TxPauseFrames); + RMON_UPDATE(mac, TxJumboFramesReceivedOK, TxJumboFramesOK); + RMON_UPDATE(mac, TxJumboOctetsReceivedOK, TxJumboOctetsOK); return &mac->stats; } @@ -631,10 +601,9 @@ static struct cmac *pm3393_mac_create(adapter_t *adapter, int index) { struct cmac *cmac; - cmac = kmalloc(sizeof(*cmac) + sizeof(cmac_instance), GFP_KERNEL); + cmac = kzalloc(sizeof(*cmac) + sizeof(cmac_instance), GFP_KERNEL); if (!cmac) return NULL; - memset(cmac, 0, sizeof(*cmac)); cmac->ops = &pm3393_ops; cmac->instance = (cmac_instance *) (cmac + 1); @@ -815,6 +784,12 @@ static int pm3393_mac_reset(adapter_t * adapter) successful_reset = (is_pl4_reset_finished && !is_pl4_outof_lock && is_xaui_mabc_pll_locked); + + CH_DBG(adapter, HW, + "PM3393 HW reset %d: pl4_reset 0x%x, val 0x%x, " + "is_pl4_outof_lock 0x%x, xaui_locked 0x%x\n", + i, is_pl4_reset_finished, val, is_pl4_outof_lock, + is_xaui_mabc_pll_locked); } return successful_reset ? 0 : 1; } diff --git a/drivers/net/chelsio/regs.h b/drivers/net/chelsio/regs.h index b90e11f40d1..c80bf4d6d0a 100644 --- a/drivers/net/chelsio/regs.h +++ b/drivers/net/chelsio/regs.h @@ -71,6 +71,10 @@ #define V_CMDQ_PRIORITY(x) ((x) << S_CMDQ_PRIORITY) #define G_CMDQ_PRIORITY(x) (((x) >> S_CMDQ_PRIORITY) & M_CMDQ_PRIORITY) +#define S_DISABLE_CMDQ0_GTS 8 +#define V_DISABLE_CMDQ0_GTS(x) ((x) << S_DISABLE_CMDQ0_GTS) +#define F_DISABLE_CMDQ0_GTS V_DISABLE_CMDQ0_GTS(1U) + #define S_DISABLE_CMDQ1_GTS 9 #define V_DISABLE_CMDQ1_GTS(x) ((x) << S_DISABLE_CMDQ1_GTS) #define F_DISABLE_CMDQ1_GTS V_DISABLE_CMDQ1_GTS(1U) @@ -87,12 +91,18 @@ #define V_ENABLE_BIG_ENDIAN(x) ((x) << S_ENABLE_BIG_ENDIAN) #define F_ENABLE_BIG_ENDIAN V_ENABLE_BIG_ENDIAN(1U) +#define S_FL_SELECTION_CRITERIA 13 +#define V_FL_SELECTION_CRITERIA(x) ((x) << S_FL_SELECTION_CRITERIA) +#define F_FL_SELECTION_CRITERIA V_FL_SELECTION_CRITERIA(1U) + #define S_ISCSI_COALESCE 14 #define V_ISCSI_COALESCE(x) ((x) << S_ISCSI_COALESCE) #define F_ISCSI_COALESCE V_ISCSI_COALESCE(1U) #define S_RX_PKT_OFFSET 15 +#define M_RX_PKT_OFFSET 0x7 #define V_RX_PKT_OFFSET(x) ((x) << S_RX_PKT_OFFSET) +#define G_RX_PKT_OFFSET(x) (((x) >> S_RX_PKT_OFFSET) & M_RX_PKT_OFFSET) #define S_VLAN_XTRACT 18 #define V_VLAN_XTRACT(x) ((x) << S_VLAN_XTRACT) @@ -108,16 +118,114 @@ #define A_SG_FL1BASELWR 0x20 #define A_SG_FL1BASEUPR 0x24 #define A_SG_CMD0SIZE 0x28 + +#define S_CMDQ0_SIZE 0 +#define M_CMDQ0_SIZE 0x1ffff +#define V_CMDQ0_SIZE(x) ((x) << S_CMDQ0_SIZE) +#define G_CMDQ0_SIZE(x) (((x) >> S_CMDQ0_SIZE) & M_CMDQ0_SIZE) + #define A_SG_FL0SIZE 0x2c + +#define S_FL0_SIZE 0 +#define M_FL0_SIZE 0x1ffff +#define V_FL0_SIZE(x) ((x) << S_FL0_SIZE) +#define G_FL0_SIZE(x) (((x) >> S_FL0_SIZE) & M_FL0_SIZE) + #define A_SG_RSPSIZE 0x30 + +#define S_RESPQ_SIZE 0 +#define M_RESPQ_SIZE 0x1ffff +#define V_RESPQ_SIZE(x) ((x) << S_RESPQ_SIZE) +#define G_RESPQ_SIZE(x) (((x) >> S_RESPQ_SIZE) & M_RESPQ_SIZE) + #define A_SG_RSPBASELWR 0x34 #define A_SG_RSPBASEUPR 0x38 #define A_SG_FLTHRESHOLD 0x3c + +#define S_FL_THRESHOLD 0 +#define M_FL_THRESHOLD 0xffff +#define V_FL_THRESHOLD(x) ((x) << S_FL_THRESHOLD) +#define G_FL_THRESHOLD(x) (((x) >> S_FL_THRESHOLD) & M_FL_THRESHOLD) + #define A_SG_RSPQUEUECREDIT 0x40 + +#define S_RESPQ_CREDIT 0 +#define M_RESPQ_CREDIT 0x1ffff +#define V_RESPQ_CREDIT(x) ((x) << S_RESPQ_CREDIT) +#define G_RESPQ_CREDIT(x) (((x) >> S_RESPQ_CREDIT) & M_RESPQ_CREDIT) + #define A_SG_SLEEPING 0x48 + +#define S_SLEEPING 0 +#define M_SLEEPING 0xffff +#define V_SLEEPING(x) ((x) << S_SLEEPING) +#define G_SLEEPING(x) (((x) >> S_SLEEPING) & M_SLEEPING) + #define A_SG_INTRTIMER 0x4c + +#define S_INTERRUPT_TIMER_COUNT 0 +#define M_INTERRUPT_TIMER_COUNT 0xffffff +#define V_INTERRUPT_TIMER_COUNT(x) ((x) << S_INTERRUPT_TIMER_COUNT) +#define G_INTERRUPT_TIMER_COUNT(x) (((x) >> S_INTERRUPT_TIMER_COUNT) & M_INTERRUPT_TIMER_COUNT) + +#define A_SG_CMD0PTR 0x50 + +#define S_CMDQ0_POINTER 0 +#define M_CMDQ0_POINTER 0xffff +#define V_CMDQ0_POINTER(x) ((x) << S_CMDQ0_POINTER) +#define G_CMDQ0_POINTER(x) (((x) >> S_CMDQ0_POINTER) & M_CMDQ0_POINTER) + +#define S_CURRENT_GENERATION_BIT 16 +#define V_CURRENT_GENERATION_BIT(x) ((x) << S_CURRENT_GENERATION_BIT) +#define F_CURRENT_GENERATION_BIT V_CURRENT_GENERATION_BIT(1U) + +#define A_SG_CMD1PTR 0x54 + +#define S_CMDQ1_POINTER 0 +#define M_CMDQ1_POINTER 0xffff +#define V_CMDQ1_POINTER(x) ((x) << S_CMDQ1_POINTER) +#define G_CMDQ1_POINTER(x) (((x) >> S_CMDQ1_POINTER) & M_CMDQ1_POINTER) + +#define A_SG_FL0PTR 0x58 + +#define S_FL0_POINTER 0 +#define M_FL0_POINTER 0xffff +#define V_FL0_POINTER(x) ((x) << S_FL0_POINTER) +#define G_FL0_POINTER(x) (((x) >> S_FL0_POINTER) & M_FL0_POINTER) + +#define A_SG_FL1PTR 0x5c + +#define S_FL1_POINTER 0 +#define M_FL1_POINTER 0xffff +#define V_FL1_POINTER(x) ((x) << S_FL1_POINTER) +#define G_FL1_POINTER(x) (((x) >> S_FL1_POINTER) & M_FL1_POINTER) + +#define A_SG_VERSION 0x6c + +#define S_DAY 0 +#define M_DAY 0x1f +#define V_DAY(x) ((x) << S_DAY) +#define G_DAY(x) (((x) >> S_DAY) & M_DAY) + +#define S_MONTH 5 +#define M_MONTH 0xf +#define V_MONTH(x) ((x) << S_MONTH) +#define G_MONTH(x) (((x) >> S_MONTH) & M_MONTH) + #define A_SG_CMD1SIZE 0xb0 + +#define S_CMDQ1_SIZE 0 +#define M_CMDQ1_SIZE 0x1ffff +#define V_CMDQ1_SIZE(x) ((x) << S_CMDQ1_SIZE) +#define G_CMDQ1_SIZE(x) (((x) >> S_CMDQ1_SIZE) & M_CMDQ1_SIZE) + #define A_SG_FL1SIZE 0xb4 + +#define S_FL1_SIZE 0 +#define M_FL1_SIZE 0x1ffff +#define V_FL1_SIZE(x) ((x) << S_FL1_SIZE) +#define G_FL1_SIZE(x) (((x) >> S_FL1_SIZE) & M_FL1_SIZE) + #define A_SG_INT_ENABLE 0xb8 #define S_RESPQ_EXHAUSTED 0 @@ -144,21 +252,369 @@ #define A_SG_RESPACCUTIMER 0xc0 /* MC3 registers */ +#define A_MC3_CFG 0x100 + +#define S_CLK_ENABLE 0 +#define V_CLK_ENABLE(x) ((x) << S_CLK_ENABLE) +#define F_CLK_ENABLE V_CLK_ENABLE(1U) #define S_READY 1 #define V_READY(x) ((x) << S_READY) #define F_READY V_READY(1U) -/* MC4 registers */ +#define S_READ_TO_WRITE_DELAY 2 +#define M_READ_TO_WRITE_DELAY 0x7 +#define V_READ_TO_WRITE_DELAY(x) ((x) << S_READ_TO_WRITE_DELAY) +#define G_READ_TO_WRITE_DELAY(x) (((x) >> S_READ_TO_WRITE_DELAY) & M_READ_TO_WRITE_DELAY) + +#define S_WRITE_TO_READ_DELAY 5 +#define M_WRITE_TO_READ_DELAY 0x7 +#define V_WRITE_TO_READ_DELAY(x) ((x) << S_WRITE_TO_READ_DELAY) +#define G_WRITE_TO_READ_DELAY(x) (((x) >> S_WRITE_TO_READ_DELAY) & M_WRITE_TO_READ_DELAY) +#define S_MC3_BANK_CYCLE 8 +#define M_MC3_BANK_CYCLE 0xf +#define V_MC3_BANK_CYCLE(x) ((x) << S_MC3_BANK_CYCLE) +#define G_MC3_BANK_CYCLE(x) (((x) >> S_MC3_BANK_CYCLE) & M_MC3_BANK_CYCLE) + +#define S_REFRESH_CYCLE 12 +#define M_REFRESH_CYCLE 0xf +#define V_REFRESH_CYCLE(x) ((x) << S_REFRESH_CYCLE) +#define G_REFRESH_CYCLE(x) (((x) >> S_REFRESH_CYCLE) & M_REFRESH_CYCLE) + +#define S_PRECHARGE_CYCLE 16 +#define M_PRECHARGE_CYCLE 0x3 +#define V_PRECHARGE_CYCLE(x) ((x) << S_PRECHARGE_CYCLE) +#define G_PRECHARGE_CYCLE(x) (((x) >> S_PRECHARGE_CYCLE) & M_PRECHARGE_CYCLE) + +#define S_ACTIVE_TO_READ_WRITE_DELAY 18 +#define V_ACTIVE_TO_READ_WRITE_DELAY(x) ((x) << S_ACTIVE_TO_READ_WRITE_DELAY) +#define F_ACTIVE_TO_READ_WRITE_DELAY V_ACTIVE_TO_READ_WRITE_DELAY(1U) + +#define S_ACTIVE_TO_PRECHARGE_DELAY 19 +#define M_ACTIVE_TO_PRECHARGE_DELAY 0x7 +#define V_ACTIVE_TO_PRECHARGE_DELAY(x) ((x) << S_ACTIVE_TO_PRECHARGE_DELAY) +#define G_ACTIVE_TO_PRECHARGE_DELAY(x) (((x) >> S_ACTIVE_TO_PRECHARGE_DELAY) & M_ACTIVE_TO_PRECHARGE_DELAY) + +#define S_WRITE_RECOVERY_DELAY 22 +#define M_WRITE_RECOVERY_DELAY 0x3 +#define V_WRITE_RECOVERY_DELAY(x) ((x) << S_WRITE_RECOVERY_DELAY) +#define G_WRITE_RECOVERY_DELAY(x) (((x) >> S_WRITE_RECOVERY_DELAY) & M_WRITE_RECOVERY_DELAY) + +#define S_DENSITY 24 +#define M_DENSITY 0x3 +#define V_DENSITY(x) ((x) << S_DENSITY) +#define G_DENSITY(x) (((x) >> S_DENSITY) & M_DENSITY) + +#define S_ORGANIZATION 26 +#define V_ORGANIZATION(x) ((x) << S_ORGANIZATION) +#define F_ORGANIZATION V_ORGANIZATION(1U) + +#define S_BANKS 27 +#define V_BANKS(x) ((x) << S_BANKS) +#define F_BANKS V_BANKS(1U) + +#define S_UNREGISTERED 28 +#define V_UNREGISTERED(x) ((x) << S_UNREGISTERED) +#define F_UNREGISTERED V_UNREGISTERED(1U) + +#define S_MC3_WIDTH 29 +#define M_MC3_WIDTH 0x3 +#define V_MC3_WIDTH(x) ((x) << S_MC3_WIDTH) +#define G_MC3_WIDTH(x) (((x) >> S_MC3_WIDTH) & M_MC3_WIDTH) + +#define S_MC3_SLOW 31 +#define V_MC3_SLOW(x) ((x) << S_MC3_SLOW) +#define F_MC3_SLOW V_MC3_SLOW(1U) + +#define A_MC3_MODE 0x104 + +#define S_MC3_MODE 0 +#define M_MC3_MODE 0x3fff +#define V_MC3_MODE(x) ((x) << S_MC3_MODE) +#define G_MC3_MODE(x) (((x) >> S_MC3_MODE) & M_MC3_MODE) + +#define S_BUSY 31 +#define V_BUSY(x) ((x) << S_BUSY) +#define F_BUSY V_BUSY(1U) + +#define A_MC3_EXT_MODE 0x108 + +#define S_MC3_EXTENDED_MODE 0 +#define M_MC3_EXTENDED_MODE 0x3fff +#define V_MC3_EXTENDED_MODE(x) ((x) << S_MC3_EXTENDED_MODE) +#define G_MC3_EXTENDED_MODE(x) (((x) >> S_MC3_EXTENDED_MODE) & M_MC3_EXTENDED_MODE) + +#define A_MC3_PRECHARG 0x10c +#define A_MC3_REFRESH 0x110 + +#define S_REFRESH_ENABLE 0 +#define V_REFRESH_ENABLE(x) ((x) << S_REFRESH_ENABLE) +#define F_REFRESH_ENABLE V_REFRESH_ENABLE(1U) + +#define S_REFRESH_DIVISOR 1 +#define M_REFRESH_DIVISOR 0x3fff +#define V_REFRESH_DIVISOR(x) ((x) << S_REFRESH_DIVISOR) +#define G_REFRESH_DIVISOR(x) (((x) >> S_REFRESH_DIVISOR) & M_REFRESH_DIVISOR) + +#define A_MC3_STROBE 0x114 + +#define S_MASTER_DLL_RESET 0 +#define V_MASTER_DLL_RESET(x) ((x) << S_MASTER_DLL_RESET) +#define F_MASTER_DLL_RESET V_MASTER_DLL_RESET(1U) + +#define S_MASTER_DLL_TAP_COUNT 1 +#define M_MASTER_DLL_TAP_COUNT 0xff +#define V_MASTER_DLL_TAP_COUNT(x) ((x) << S_MASTER_DLL_TAP_COUNT) +#define G_MASTER_DLL_TAP_COUNT(x) (((x) >> S_MASTER_DLL_TAP_COUNT) & M_MASTER_DLL_TAP_COUNT) + +#define S_MASTER_DLL_LOCKED 9 +#define V_MASTER_DLL_LOCKED(x) ((x) << S_MASTER_DLL_LOCKED) +#define F_MASTER_DLL_LOCKED V_MASTER_DLL_LOCKED(1U) + +#define S_MASTER_DLL_MAX_TAP_COUNT 10 +#define V_MASTER_DLL_MAX_TAP_COUNT(x) ((x) << S_MASTER_DLL_MAX_TAP_COUNT) +#define F_MASTER_DLL_MAX_TAP_COUNT V_MASTER_DLL_MAX_TAP_COUNT(1U) + +#define S_MASTER_DLL_TAP_COUNT_OFFSET 11 +#define M_MASTER_DLL_TAP_COUNT_OFFSET 0x3f +#define V_MASTER_DLL_TAP_COUNT_OFFSET(x) ((x) << S_MASTER_DLL_TAP_COUNT_OFFSET) +#define G_MASTER_DLL_TAP_COUNT_OFFSET(x) (((x) >> S_MASTER_DLL_TAP_COUNT_OFFSET) & M_MASTER_DLL_TAP_COUNT_OFFSET) + +#define S_SLAVE_DLL_RESET 11 +#define V_SLAVE_DLL_RESET(x) ((x) << S_SLAVE_DLL_RESET) +#define F_SLAVE_DLL_RESET V_SLAVE_DLL_RESET(1U) + +#define S_SLAVE_DLL_DELTA 12 +#define M_SLAVE_DLL_DELTA 0xf +#define V_SLAVE_DLL_DELTA(x) ((x) << S_SLAVE_DLL_DELTA) +#define G_SLAVE_DLL_DELTA(x) (((x) >> S_SLAVE_DLL_DELTA) & M_SLAVE_DLL_DELTA) + +#define S_SLAVE_DELAY_LINE_MANUAL_TAP_COUNT 17 +#define M_SLAVE_DELAY_LINE_MANUAL_TAP_COUNT 0x3f +#define V_SLAVE_DELAY_LINE_MANUAL_TAP_COUNT(x) ((x) << S_SLAVE_DELAY_LINE_MANUAL_TAP_COUNT) +#define G_SLAVE_DELAY_LINE_MANUAL_TAP_COUNT(x) (((x) >> S_SLAVE_DELAY_LINE_MANUAL_TAP_COUNT) & M_SLAVE_DELAY_LINE_MANUAL_TAP_COUNT) + +#define S_SLAVE_DELAY_LINE_MANUAL_TAP_COUNT_ENABLE 23 +#define V_SLAVE_DELAY_LINE_MANUAL_TAP_COUNT_ENABLE(x) ((x) << S_SLAVE_DELAY_LINE_MANUAL_TAP_COUNT_ENABLE) +#define F_SLAVE_DELAY_LINE_MANUAL_TAP_COUNT_ENABLE V_SLAVE_DELAY_LINE_MANUAL_TAP_COUNT_ENABLE(1U) + +#define S_SLAVE_DELAY_LINE_TAP_COUNT 24 +#define M_SLAVE_DELAY_LINE_TAP_COUNT 0x3f +#define V_SLAVE_DELAY_LINE_TAP_COUNT(x) ((x) << S_SLAVE_DELAY_LINE_TAP_COUNT) +#define G_SLAVE_DELAY_LINE_TAP_COUNT(x) (((x) >> S_SLAVE_DELAY_LINE_TAP_COUNT) & M_SLAVE_DELAY_LINE_TAP_COUNT) + +#define A_MC3_ECC_CNTL 0x118 + +#define S_ECC_GENERATION_ENABLE 0 +#define V_ECC_GENERATION_ENABLE(x) ((x) << S_ECC_GENERATION_ENABLE) +#define F_ECC_GENERATION_ENABLE V_ECC_GENERATION_ENABLE(1U) + +#define S_ECC_CHECK_ENABLE 1 +#define V_ECC_CHECK_ENABLE(x) ((x) << S_ECC_CHECK_ENABLE) +#define F_ECC_CHECK_ENABLE V_ECC_CHECK_ENABLE(1U) + +#define S_CORRECTABLE_ERROR_COUNT 2 +#define M_CORRECTABLE_ERROR_COUNT 0xff +#define V_CORRECTABLE_ERROR_COUNT(x) ((x) << S_CORRECTABLE_ERROR_COUNT) +#define G_CORRECTABLE_ERROR_COUNT(x) (((x) >> S_CORRECTABLE_ERROR_COUNT) & M_CORRECTABLE_ERROR_COUNT) + +#define S_UNCORRECTABLE_ERROR_COUNT 10 +#define M_UNCORRECTABLE_ERROR_COUNT 0xff +#define V_UNCORRECTABLE_ERROR_COUNT(x) ((x) << S_UNCORRECTABLE_ERROR_COUNT) +#define G_UNCORRECTABLE_ERROR_COUNT(x) (((x) >> S_UNCORRECTABLE_ERROR_COUNT) & M_UNCORRECTABLE_ERROR_COUNT) + +#define A_MC3_CE_ADDR 0x11c + +#define S_MC3_CE_ADDR 4 +#define M_MC3_CE_ADDR 0xfffffff +#define V_MC3_CE_ADDR(x) ((x) << S_MC3_CE_ADDR) +#define G_MC3_CE_ADDR(x) (((x) >> S_MC3_CE_ADDR) & M_MC3_CE_ADDR) + +#define A_MC3_CE_DATA0 0x120 +#define A_MC3_CE_DATA1 0x124 +#define A_MC3_CE_DATA2 0x128 +#define A_MC3_CE_DATA3 0x12c +#define A_MC3_CE_DATA4 0x130 +#define A_MC3_UE_ADDR 0x134 + +#define S_MC3_UE_ADDR 4 +#define M_MC3_UE_ADDR 0xfffffff +#define V_MC3_UE_ADDR(x) ((x) << S_MC3_UE_ADDR) +#define G_MC3_UE_ADDR(x) (((x) >> S_MC3_UE_ADDR) & M_MC3_UE_ADDR) + +#define A_MC3_UE_DATA0 0x138 +#define A_MC3_UE_DATA1 0x13c +#define A_MC3_UE_DATA2 0x140 +#define A_MC3_UE_DATA3 0x144 +#define A_MC3_UE_DATA4 0x148 +#define A_MC3_BD_ADDR 0x14c +#define A_MC3_BD_DATA0 0x150 +#define A_MC3_BD_DATA1 0x154 +#define A_MC3_BD_DATA2 0x158 +#define A_MC3_BD_DATA3 0x15c +#define A_MC3_BD_DATA4 0x160 +#define A_MC3_BD_OP 0x164 + +#define S_BACK_DOOR_OPERATION 0 +#define V_BACK_DOOR_OPERATION(x) ((x) << S_BACK_DOOR_OPERATION) +#define F_BACK_DOOR_OPERATION V_BACK_DOOR_OPERATION(1U) + +#define A_MC3_BIST_ADDR_BEG 0x168 +#define A_MC3_BIST_ADDR_END 0x16c +#define A_MC3_BIST_DATA 0x170 +#define A_MC3_BIST_OP 0x174 + +#define S_OP 0 +#define V_OP(x) ((x) << S_OP) +#define F_OP V_OP(1U) + +#define S_DATA_PATTERN 1 +#define M_DATA_PATTERN 0x3 +#define V_DATA_PATTERN(x) ((x) << S_DATA_PATTERN) +#define G_DATA_PATTERN(x) (((x) >> S_DATA_PATTERN) & M_DATA_PATTERN) + +#define S_CONTINUOUS 3 +#define V_CONTINUOUS(x) ((x) << S_CONTINUOUS) +#define F_CONTINUOUS V_CONTINUOUS(1U) + +#define A_MC3_INT_ENABLE 0x178 + +#define S_MC3_CORR_ERR 0 +#define V_MC3_CORR_ERR(x) ((x) << S_MC3_CORR_ERR) +#define F_MC3_CORR_ERR V_MC3_CORR_ERR(1U) + +#define S_MC3_UNCORR_ERR 1 +#define V_MC3_UNCORR_ERR(x) ((x) << S_MC3_UNCORR_ERR) +#define F_MC3_UNCORR_ERR V_MC3_UNCORR_ERR(1U) + +#define S_MC3_PARITY_ERR 2 +#define M_MC3_PARITY_ERR 0xff +#define V_MC3_PARITY_ERR(x) ((x) << S_MC3_PARITY_ERR) +#define G_MC3_PARITY_ERR(x) (((x) >> S_MC3_PARITY_ERR) & M_MC3_PARITY_ERR) + +#define S_MC3_ADDR_ERR 10 +#define V_MC3_ADDR_ERR(x) ((x) << S_MC3_ADDR_ERR) +#define F_MC3_ADDR_ERR V_MC3_ADDR_ERR(1U) + +#define A_MC3_INT_CAUSE 0x17c + +/* MC4 registers */ #define A_MC4_CFG 0x180 + +#define S_POWER_UP 0 +#define V_POWER_UP(x) ((x) << S_POWER_UP) +#define F_POWER_UP V_POWER_UP(1U) + +#define S_MC4_BANK_CYCLE 8 +#define M_MC4_BANK_CYCLE 0x7 +#define V_MC4_BANK_CYCLE(x) ((x) << S_MC4_BANK_CYCLE) +#define G_MC4_BANK_CYCLE(x) (((x) >> S_MC4_BANK_CYCLE) & M_MC4_BANK_CYCLE) + +#define S_MC4_NARROW 24 +#define V_MC4_NARROW(x) ((x) << S_MC4_NARROW) +#define F_MC4_NARROW V_MC4_NARROW(1U) + #define S_MC4_SLOW 25 #define V_MC4_SLOW(x) ((x) << S_MC4_SLOW) #define F_MC4_SLOW V_MC4_SLOW(1U) -/* TPI registers */ +#define S_MC4A_WIDTH 24 +#define M_MC4A_WIDTH 0x3 +#define V_MC4A_WIDTH(x) ((x) << S_MC4A_WIDTH) +#define G_MC4A_WIDTH(x) (((x) >> S_MC4A_WIDTH) & M_MC4A_WIDTH) + +#define S_MC4A_SLOW 26 +#define V_MC4A_SLOW(x) ((x) << S_MC4A_SLOW) +#define F_MC4A_SLOW V_MC4A_SLOW(1U) + +#define A_MC4_MODE 0x184 + +#define S_MC4_MODE 0 +#define M_MC4_MODE 0x7fff +#define V_MC4_MODE(x) ((x) << S_MC4_MODE) +#define G_MC4_MODE(x) (((x) >> S_MC4_MODE) & M_MC4_MODE) + +#define A_MC4_EXT_MODE 0x188 + +#define S_MC4_EXTENDED_MODE 0 +#define M_MC4_EXTENDED_MODE 0x7fff +#define V_MC4_EXTENDED_MODE(x) ((x) << S_MC4_EXTENDED_MODE) +#define G_MC4_EXTENDED_MODE(x) (((x) >> S_MC4_EXTENDED_MODE) & M_MC4_EXTENDED_MODE) + +#define A_MC4_REFRESH 0x190 +#define A_MC4_STROBE 0x194 +#define A_MC4_ECC_CNTL 0x198 +#define A_MC4_CE_ADDR 0x19c + +#define S_MC4_CE_ADDR 4 +#define M_MC4_CE_ADDR 0xffffff +#define V_MC4_CE_ADDR(x) ((x) << S_MC4_CE_ADDR) +#define G_MC4_CE_ADDR(x) (((x) >> S_MC4_CE_ADDR) & M_MC4_CE_ADDR) + +#define A_MC4_CE_DATA0 0x1a0 +#define A_MC4_CE_DATA1 0x1a4 +#define A_MC4_CE_DATA2 0x1a8 +#define A_MC4_CE_DATA3 0x1ac +#define A_MC4_CE_DATA4 0x1b0 +#define A_MC4_UE_ADDR 0x1b4 + +#define S_MC4_UE_ADDR 4 +#define M_MC4_UE_ADDR 0xffffff +#define V_MC4_UE_ADDR(x) ((x) << S_MC4_UE_ADDR) +#define G_MC4_UE_ADDR(x) (((x) >> S_MC4_UE_ADDR) & M_MC4_UE_ADDR) + +#define A_MC4_UE_DATA0 0x1b8 +#define A_MC4_UE_DATA1 0x1bc +#define A_MC4_UE_DATA2 0x1c0 +#define A_MC4_UE_DATA3 0x1c4 +#define A_MC4_UE_DATA4 0x1c8 +#define A_MC4_BD_ADDR 0x1cc + +#define S_MC4_BACK_DOOR_ADDR 0 +#define M_MC4_BACK_DOOR_ADDR 0xfffffff +#define V_MC4_BACK_DOOR_ADDR(x) ((x) << S_MC4_BACK_DOOR_ADDR) +#define G_MC4_BACK_DOOR_ADDR(x) (((x) >> S_MC4_BACK_DOOR_ADDR) & M_MC4_BACK_DOOR_ADDR) + +#define A_MC4_BD_DATA0 0x1d0 +#define A_MC4_BD_DATA1 0x1d4 +#define A_MC4_BD_DATA2 0x1d8 +#define A_MC4_BD_DATA3 0x1dc +#define A_MC4_BD_DATA4 0x1e0 +#define A_MC4_BD_OP 0x1e4 + +#define S_OPERATION 0 +#define V_OPERATION(x) ((x) << S_OPERATION) +#define F_OPERATION V_OPERATION(1U) + +#define A_MC4_BIST_ADDR_BEG 0x1e8 +#define A_MC4_BIST_ADDR_END 0x1ec +#define A_MC4_BIST_DATA 0x1f0 +#define A_MC4_BIST_OP 0x1f4 +#define A_MC4_INT_ENABLE 0x1f8 + +#define S_MC4_CORR_ERR 0 +#define V_MC4_CORR_ERR(x) ((x) << S_MC4_CORR_ERR) +#define F_MC4_CORR_ERR V_MC4_CORR_ERR(1U) + +#define S_MC4_UNCORR_ERR 1 +#define V_MC4_UNCORR_ERR(x) ((x) << S_MC4_UNCORR_ERR) +#define F_MC4_UNCORR_ERR V_MC4_UNCORR_ERR(1U) + +#define S_MC4_ADDR_ERR 2 +#define V_MC4_ADDR_ERR(x) ((x) << S_MC4_ADDR_ERR) +#define F_MC4_ADDR_ERR V_MC4_ADDR_ERR(1U) + +#define A_MC4_INT_CAUSE 0x1fc +/* TPI registers */ #define A_TPI_ADDR 0x280 + +#define S_TPI_ADDRESS 0 +#define M_TPI_ADDRESS 0xffffff +#define V_TPI_ADDRESS(x) ((x) << S_TPI_ADDRESS) +#define G_TPI_ADDRESS(x) (((x) >> S_TPI_ADDRESS) & M_TPI_ADDRESS) + #define A_TPI_WR_DATA 0x284 #define A_TPI_RD_DATA 0x288 #define A_TPI_CSR 0x28c @@ -171,6 +627,10 @@ #define V_TPIRDY(x) ((x) << S_TPIRDY) #define F_TPIRDY V_TPIRDY(1U) +#define S_INT_DIR 31 +#define V_INT_DIR(x) ((x) << S_INT_DIR) +#define F_INT_DIR V_INT_DIR(1U) + #define A_TPI_PAR 0x29c #define S_TPIPAR 0 @@ -178,14 +638,26 @@ #define V_TPIPAR(x) ((x) << S_TPIPAR) #define G_TPIPAR(x) (((x) >> S_TPIPAR) & M_TPIPAR) -/* TP registers */ +/* TP registers */ #define A_TP_IN_CONFIG 0x300 +#define S_TP_IN_CSPI_TUNNEL 0 +#define V_TP_IN_CSPI_TUNNEL(x) ((x) << S_TP_IN_CSPI_TUNNEL) +#define F_TP_IN_CSPI_TUNNEL V_TP_IN_CSPI_TUNNEL(1U) + +#define S_TP_IN_CSPI_ETHERNET 1 +#define V_TP_IN_CSPI_ETHERNET(x) ((x) << S_TP_IN_CSPI_ETHERNET) +#define F_TP_IN_CSPI_ETHERNET V_TP_IN_CSPI_ETHERNET(1U) + #define S_TP_IN_CSPI_CPL 3 #define V_TP_IN_CSPI_CPL(x) ((x) << S_TP_IN_CSPI_CPL) #define F_TP_IN_CSPI_CPL V_TP_IN_CSPI_CPL(1U) +#define S_TP_IN_CSPI_POS 4 +#define V_TP_IN_CSPI_POS(x) ((x) << S_TP_IN_CSPI_POS) +#define F_TP_IN_CSPI_POS V_TP_IN_CSPI_POS(1U) + #define S_TP_IN_CSPI_CHECK_IP_CSUM 5 #define V_TP_IN_CSPI_CHECK_IP_CSUM(x) ((x) << S_TP_IN_CSPI_CHECK_IP_CSUM) #define F_TP_IN_CSPI_CHECK_IP_CSUM V_TP_IN_CSPI_CHECK_IP_CSUM(1U) @@ -194,10 +666,22 @@ #define V_TP_IN_CSPI_CHECK_TCP_CSUM(x) ((x) << S_TP_IN_CSPI_CHECK_TCP_CSUM) #define F_TP_IN_CSPI_CHECK_TCP_CSUM V_TP_IN_CSPI_CHECK_TCP_CSUM(1U) +#define S_TP_IN_ESPI_TUNNEL 7 +#define V_TP_IN_ESPI_TUNNEL(x) ((x) << S_TP_IN_ESPI_TUNNEL) +#define F_TP_IN_ESPI_TUNNEL V_TP_IN_ESPI_TUNNEL(1U) + #define S_TP_IN_ESPI_ETHERNET 8 #define V_TP_IN_ESPI_ETHERNET(x) ((x) << S_TP_IN_ESPI_ETHERNET) #define F_TP_IN_ESPI_ETHERNET V_TP_IN_ESPI_ETHERNET(1U) +#define S_TP_IN_ESPI_CPL 10 +#define V_TP_IN_ESPI_CPL(x) ((x) << S_TP_IN_ESPI_CPL) +#define F_TP_IN_ESPI_CPL V_TP_IN_ESPI_CPL(1U) + +#define S_TP_IN_ESPI_POS 11 +#define V_TP_IN_ESPI_POS(x) ((x) << S_TP_IN_ESPI_POS) +#define F_TP_IN_ESPI_POS V_TP_IN_ESPI_POS(1U) + #define S_TP_IN_ESPI_CHECK_IP_CSUM 12 #define V_TP_IN_ESPI_CHECK_IP_CSUM(x) ((x) << S_TP_IN_ESPI_CHECK_IP_CSUM) #define F_TP_IN_ESPI_CHECK_IP_CSUM V_TP_IN_ESPI_CHECK_IP_CSUM(1U) @@ -212,14 +696,42 @@ #define A_TP_OUT_CONFIG 0x304 +#define S_TP_OUT_C_ETH 0 +#define V_TP_OUT_C_ETH(x) ((x) << S_TP_OUT_C_ETH) +#define F_TP_OUT_C_ETH V_TP_OUT_C_ETH(1U) + #define S_TP_OUT_CSPI_CPL 2 #define V_TP_OUT_CSPI_CPL(x) ((x) << S_TP_OUT_CSPI_CPL) #define F_TP_OUT_CSPI_CPL V_TP_OUT_CSPI_CPL(1U) +#define S_TP_OUT_CSPI_POS 3 +#define V_TP_OUT_CSPI_POS(x) ((x) << S_TP_OUT_CSPI_POS) +#define F_TP_OUT_CSPI_POS V_TP_OUT_CSPI_POS(1U) + +#define S_TP_OUT_CSPI_GENERATE_IP_CSUM 4 +#define V_TP_OUT_CSPI_GENERATE_IP_CSUM(x) ((x) << S_TP_OUT_CSPI_GENERATE_IP_CSUM) +#define F_TP_OUT_CSPI_GENERATE_IP_CSUM V_TP_OUT_CSPI_GENERATE_IP_CSUM(1U) + +#define S_TP_OUT_CSPI_GENERATE_TCP_CSUM 5 +#define V_TP_OUT_CSPI_GENERATE_TCP_CSUM(x) ((x) << S_TP_OUT_CSPI_GENERATE_TCP_CSUM) +#define F_TP_OUT_CSPI_GENERATE_TCP_CSUM V_TP_OUT_CSPI_GENERATE_TCP_CSUM(1U) + #define S_TP_OUT_ESPI_ETHERNET 6 #define V_TP_OUT_ESPI_ETHERNET(x) ((x) << S_TP_OUT_ESPI_ETHERNET) #define F_TP_OUT_ESPI_ETHERNET V_TP_OUT_ESPI_ETHERNET(1U) +#define S_TP_OUT_ESPI_TAG_ETHERNET 7 +#define V_TP_OUT_ESPI_TAG_ETHERNET(x) ((x) << S_TP_OUT_ESPI_TAG_ETHERNET) +#define F_TP_OUT_ESPI_TAG_ETHERNET V_TP_OUT_ESPI_TAG_ETHERNET(1U) + +#define S_TP_OUT_ESPI_CPL 8 +#define V_TP_OUT_ESPI_CPL(x) ((x) << S_TP_OUT_ESPI_CPL) +#define F_TP_OUT_ESPI_CPL V_TP_OUT_ESPI_CPL(1U) + +#define S_TP_OUT_ESPI_POS 9 +#define V_TP_OUT_ESPI_POS(x) ((x) << S_TP_OUT_ESPI_POS) +#define F_TP_OUT_ESPI_POS V_TP_OUT_ESPI_POS(1U) + #define S_TP_OUT_ESPI_GENERATE_IP_CSUM 10 #define V_TP_OUT_ESPI_GENERATE_IP_CSUM(x) ((x) << S_TP_OUT_ESPI_GENERATE_IP_CSUM) #define F_TP_OUT_ESPI_GENERATE_IP_CSUM V_TP_OUT_ESPI_GENERATE_IP_CSUM(1U) @@ -233,6 +745,16 @@ #define S_IP_TTL 0 #define M_IP_TTL 0xff #define V_IP_TTL(x) ((x) << S_IP_TTL) +#define G_IP_TTL(x) (((x) >> S_IP_TTL) & M_IP_TTL) + +#define S_TCAM_SERVER_REGION_USAGE 8 +#define M_TCAM_SERVER_REGION_USAGE 0x3 +#define V_TCAM_SERVER_REGION_USAGE(x) ((x) << S_TCAM_SERVER_REGION_USAGE) +#define G_TCAM_SERVER_REGION_USAGE(x) (((x) >> S_TCAM_SERVER_REGION_USAGE) & M_TCAM_SERVER_REGION_USAGE) + +#define S_QOS_MAPPING 10 +#define V_QOS_MAPPING(x) ((x) << S_QOS_MAPPING) +#define F_QOS_MAPPING V_QOS_MAPPING(1U) #define S_TCP_CSUM 11 #define V_TCP_CSUM(x) ((x) << S_TCP_CSUM) @@ -246,31 +768,476 @@ #define V_IP_CSUM(x) ((x) << S_IP_CSUM) #define F_IP_CSUM V_IP_CSUM(1U) +#define S_IP_ID_SPLIT 14 +#define V_IP_ID_SPLIT(x) ((x) << S_IP_ID_SPLIT) +#define F_IP_ID_SPLIT V_IP_ID_SPLIT(1U) + #define S_PATH_MTU 15 #define V_PATH_MTU(x) ((x) << S_PATH_MTU) #define F_PATH_MTU V_PATH_MTU(1U) #define S_5TUPLE_LOOKUP 17 +#define M_5TUPLE_LOOKUP 0x3 #define V_5TUPLE_LOOKUP(x) ((x) << S_5TUPLE_LOOKUP) +#define G_5TUPLE_LOOKUP(x) (((x) >> S_5TUPLE_LOOKUP) & M_5TUPLE_LOOKUP) + +#define S_IP_FRAGMENT_DROP 19 +#define V_IP_FRAGMENT_DROP(x) ((x) << S_IP_FRAGMENT_DROP) +#define F_IP_FRAGMENT_DROP V_IP_FRAGMENT_DROP(1U) + +#define S_PING_DROP 20 +#define V_PING_DROP(x) ((x) << S_PING_DROP) +#define F_PING_DROP V_PING_DROP(1U) + +#define S_PROTECT_MODE 21 +#define V_PROTECT_MODE(x) ((x) << S_PROTECT_MODE) +#define F_PROTECT_MODE V_PROTECT_MODE(1U) + +#define S_SYN_COOKIE_ALGORITHM 22 +#define V_SYN_COOKIE_ALGORITHM(x) ((x) << S_SYN_COOKIE_ALGORITHM) +#define F_SYN_COOKIE_ALGORITHM V_SYN_COOKIE_ALGORITHM(1U) + +#define S_ATTACK_FILTER 23 +#define V_ATTACK_FILTER(x) ((x) << S_ATTACK_FILTER) +#define F_ATTACK_FILTER V_ATTACK_FILTER(1U) + +#define S_INTERFACE_TYPE 24 +#define V_INTERFACE_TYPE(x) ((x) << S_INTERFACE_TYPE) +#define F_INTERFACE_TYPE V_INTERFACE_TYPE(1U) + +#define S_DISABLE_RX_FLOW_CONTROL 25 +#define V_DISABLE_RX_FLOW_CONTROL(x) ((x) << S_DISABLE_RX_FLOW_CONTROL) +#define F_DISABLE_RX_FLOW_CONTROL V_DISABLE_RX_FLOW_CONTROL(1U) #define S_SYN_COOKIE_PARAMETER 26 +#define M_SYN_COOKIE_PARAMETER 0x3f #define V_SYN_COOKIE_PARAMETER(x) ((x) << S_SYN_COOKIE_PARAMETER) +#define G_SYN_COOKIE_PARAMETER(x) (((x) >> S_SYN_COOKIE_PARAMETER) & M_SYN_COOKIE_PARAMETER) + +#define A_TP_GLOBAL_RX_CREDITS 0x30c +#define A_TP_CM_SIZE 0x310 +#define A_TP_CM_MM_BASE 0x314 + +#define S_CM_MEMMGR_BASE 0 +#define M_CM_MEMMGR_BASE 0xfffffff +#define V_CM_MEMMGR_BASE(x) ((x) << S_CM_MEMMGR_BASE) +#define G_CM_MEMMGR_BASE(x) (((x) >> S_CM_MEMMGR_BASE) & M_CM_MEMMGR_BASE) + +#define A_TP_CM_TIMER_BASE 0x318 + +#define S_CM_TIMER_BASE 0 +#define M_CM_TIMER_BASE 0xfffffff +#define V_CM_TIMER_BASE(x) ((x) << S_CM_TIMER_BASE) +#define G_CM_TIMER_BASE(x) (((x) >> S_CM_TIMER_BASE) & M_CM_TIMER_BASE) + +#define A_TP_PM_SIZE 0x31c +#define A_TP_PM_TX_BASE 0x320 +#define A_TP_PM_DEFRAG_BASE 0x324 +#define A_TP_PM_RX_BASE 0x328 +#define A_TP_PM_RX_PG_SIZE 0x32c +#define A_TP_PM_RX_MAX_PGS 0x330 +#define A_TP_PM_TX_PG_SIZE 0x334 +#define A_TP_PM_TX_MAX_PGS 0x338 +#define A_TP_TCP_OPTIONS 0x340 + +#define S_TIMESTAMP 0 +#define M_TIMESTAMP 0x3 +#define V_TIMESTAMP(x) ((x) << S_TIMESTAMP) +#define G_TIMESTAMP(x) (((x) >> S_TIMESTAMP) & M_TIMESTAMP) + +#define S_WINDOW_SCALE 2 +#define M_WINDOW_SCALE 0x3 +#define V_WINDOW_SCALE(x) ((x) << S_WINDOW_SCALE) +#define G_WINDOW_SCALE(x) (((x) >> S_WINDOW_SCALE) & M_WINDOW_SCALE) + +#define S_SACK 4 +#define M_SACK 0x3 +#define V_SACK(x) ((x) << S_SACK) +#define G_SACK(x) (((x) >> S_SACK) & M_SACK) + +#define S_ECN 6 +#define M_ECN 0x3 +#define V_ECN(x) ((x) << S_ECN) +#define G_ECN(x) (((x) >> S_ECN) & M_ECN) + +#define S_SACK_ALGORITHM 8 +#define M_SACK_ALGORITHM 0x3 +#define V_SACK_ALGORITHM(x) ((x) << S_SACK_ALGORITHM) +#define G_SACK_ALGORITHM(x) (((x) >> S_SACK_ALGORITHM) & M_SACK_ALGORITHM) + +#define S_MSS 10 +#define V_MSS(x) ((x) << S_MSS) +#define F_MSS V_MSS(1U) + +#define S_DEFAULT_PEER_MSS 16 +#define M_DEFAULT_PEER_MSS 0xffff +#define V_DEFAULT_PEER_MSS(x) ((x) << S_DEFAULT_PEER_MSS) +#define G_DEFAULT_PEER_MSS(x) (((x) >> S_DEFAULT_PEER_MSS) & M_DEFAULT_PEER_MSS) + +#define A_TP_DACK_CONFIG 0x344 + +#define S_DACK_MODE 0 +#define V_DACK_MODE(x) ((x) << S_DACK_MODE) +#define F_DACK_MODE V_DACK_MODE(1U) + +#define S_DACK_AUTO_MGMT 1 +#define V_DACK_AUTO_MGMT(x) ((x) << S_DACK_AUTO_MGMT) +#define F_DACK_AUTO_MGMT V_DACK_AUTO_MGMT(1U) + +#define S_DACK_AUTO_CAREFUL 2 +#define V_DACK_AUTO_CAREFUL(x) ((x) << S_DACK_AUTO_CAREFUL) +#define F_DACK_AUTO_CAREFUL V_DACK_AUTO_CAREFUL(1U) + +#define S_DACK_MSS_SELECTOR 3 +#define M_DACK_MSS_SELECTOR 0x3 +#define V_DACK_MSS_SELECTOR(x) ((x) << S_DACK_MSS_SELECTOR) +#define G_DACK_MSS_SELECTOR(x) (((x) >> S_DACK_MSS_SELECTOR) & M_DACK_MSS_SELECTOR) + +#define S_DACK_BYTE_THRESHOLD 5 +#define M_DACK_BYTE_THRESHOLD 0xfffff +#define V_DACK_BYTE_THRESHOLD(x) ((x) << S_DACK_BYTE_THRESHOLD) +#define G_DACK_BYTE_THRESHOLD(x) (((x) >> S_DACK_BYTE_THRESHOLD) & M_DACK_BYTE_THRESHOLD) #define A_TP_PC_CONFIG 0x348 + +#define S_TP_ACCESS_LATENCY 0 +#define M_TP_ACCESS_LATENCY 0xf +#define V_TP_ACCESS_LATENCY(x) ((x) << S_TP_ACCESS_LATENCY) +#define G_TP_ACCESS_LATENCY(x) (((x) >> S_TP_ACCESS_LATENCY) & M_TP_ACCESS_LATENCY) + +#define S_HELD_FIN_DISABLE 4 +#define V_HELD_FIN_DISABLE(x) ((x) << S_HELD_FIN_DISABLE) +#define F_HELD_FIN_DISABLE V_HELD_FIN_DISABLE(1U) + +#define S_DDP_FC_ENABLE 5 +#define V_DDP_FC_ENABLE(x) ((x) << S_DDP_FC_ENABLE) +#define F_DDP_FC_ENABLE V_DDP_FC_ENABLE(1U) + +#define S_RDMA_ERR_ENABLE 6 +#define V_RDMA_ERR_ENABLE(x) ((x) << S_RDMA_ERR_ENABLE) +#define F_RDMA_ERR_ENABLE V_RDMA_ERR_ENABLE(1U) + +#define S_FAST_PDU_DELIVERY 7 +#define V_FAST_PDU_DELIVERY(x) ((x) << S_FAST_PDU_DELIVERY) +#define F_FAST_PDU_DELIVERY V_FAST_PDU_DELIVERY(1U) + +#define S_CLEAR_FIN 8 +#define V_CLEAR_FIN(x) ((x) << S_CLEAR_FIN) +#define F_CLEAR_FIN V_CLEAR_FIN(1U) + #define S_DIS_TX_FILL_WIN_PUSH 12 #define V_DIS_TX_FILL_WIN_PUSH(x) ((x) << S_DIS_TX_FILL_WIN_PUSH) #define F_DIS_TX_FILL_WIN_PUSH V_DIS_TX_FILL_WIN_PUSH(1U) #define S_TP_PC_REV 30 #define M_TP_PC_REV 0x3 +#define V_TP_PC_REV(x) ((x) << S_TP_PC_REV) #define G_TP_PC_REV(x) (((x) >> S_TP_PC_REV) & M_TP_PC_REV) + +#define A_TP_BACKOFF0 0x350 + +#define S_ELEMENT0 0 +#define M_ELEMENT0 0xff +#define V_ELEMENT0(x) ((x) << S_ELEMENT0) +#define G_ELEMENT0(x) (((x) >> S_ELEMENT0) & M_ELEMENT0) + +#define S_ELEMENT1 8 +#define M_ELEMENT1 0xff +#define V_ELEMENT1(x) ((x) << S_ELEMENT1) +#define G_ELEMENT1(x) (((x) >> S_ELEMENT1) & M_ELEMENT1) + +#define S_ELEMENT2 16 +#define M_ELEMENT2 0xff +#define V_ELEMENT2(x) ((x) << S_ELEMENT2) +#define G_ELEMENT2(x) (((x) >> S_ELEMENT2) & M_ELEMENT2) + +#define S_ELEMENT3 24 +#define M_ELEMENT3 0xff +#define V_ELEMENT3(x) ((x) << S_ELEMENT3) +#define G_ELEMENT3(x) (((x) >> S_ELEMENT3) & M_ELEMENT3) + +#define A_TP_BACKOFF1 0x354 +#define A_TP_BACKOFF2 0x358 +#define A_TP_BACKOFF3 0x35c +#define A_TP_PARA_REG0 0x360 + +#define S_VAR_MULT 0 +#define M_VAR_MULT 0xf +#define V_VAR_MULT(x) ((x) << S_VAR_MULT) +#define G_VAR_MULT(x) (((x) >> S_VAR_MULT) & M_VAR_MULT) + +#define S_VAR_GAIN 4 +#define M_VAR_GAIN 0xf +#define V_VAR_GAIN(x) ((x) << S_VAR_GAIN) +#define G_VAR_GAIN(x) (((x) >> S_VAR_GAIN) & M_VAR_GAIN) + +#define S_SRTT_GAIN 8 +#define M_SRTT_GAIN 0xf +#define V_SRTT_GAIN(x) ((x) << S_SRTT_GAIN) +#define G_SRTT_GAIN(x) (((x) >> S_SRTT_GAIN) & M_SRTT_GAIN) + +#define S_RTTVAR_INIT 12 +#define M_RTTVAR_INIT 0xf +#define V_RTTVAR_INIT(x) ((x) << S_RTTVAR_INIT) +#define G_RTTVAR_INIT(x) (((x) >> S_RTTVAR_INIT) & M_RTTVAR_INIT) + +#define S_DUP_THRESH 20 +#define M_DUP_THRESH 0xf +#define V_DUP_THRESH(x) ((x) << S_DUP_THRESH) +#define G_DUP_THRESH(x) (((x) >> S_DUP_THRESH) & M_DUP_THRESH) + +#define S_INIT_CONG_WIN 24 +#define M_INIT_CONG_WIN 0x7 +#define V_INIT_CONG_WIN(x) ((x) << S_INIT_CONG_WIN) +#define G_INIT_CONG_WIN(x) (((x) >> S_INIT_CONG_WIN) & M_INIT_CONG_WIN) + +#define A_TP_PARA_REG1 0x364 + +#define S_INITIAL_SLOW_START_THRESHOLD 0 +#define M_INITIAL_SLOW_START_THRESHOLD 0xffff +#define V_INITIAL_SLOW_START_THRESHOLD(x) ((x) << S_INITIAL_SLOW_START_THRESHOLD) +#define G_INITIAL_SLOW_START_THRESHOLD(x) (((x) >> S_INITIAL_SLOW_START_THRESHOLD) & M_INITIAL_SLOW_START_THRESHOLD) + +#define S_RECEIVE_BUFFER_SIZE 16 +#define M_RECEIVE_BUFFER_SIZE 0xffff +#define V_RECEIVE_BUFFER_SIZE(x) ((x) << S_RECEIVE_BUFFER_SIZE) +#define G_RECEIVE_BUFFER_SIZE(x) (((x) >> S_RECEIVE_BUFFER_SIZE) & M_RECEIVE_BUFFER_SIZE) + +#define A_TP_PARA_REG2 0x368 + +#define S_RX_COALESCE_SIZE 0 +#define M_RX_COALESCE_SIZE 0xffff +#define V_RX_COALESCE_SIZE(x) ((x) << S_RX_COALESCE_SIZE) +#define G_RX_COALESCE_SIZE(x) (((x) >> S_RX_COALESCE_SIZE) & M_RX_COALESCE_SIZE) + +#define S_MAX_RX_SIZE 16 +#define M_MAX_RX_SIZE 0xffff +#define V_MAX_RX_SIZE(x) ((x) << S_MAX_RX_SIZE) +#define G_MAX_RX_SIZE(x) (((x) >> S_MAX_RX_SIZE) & M_MAX_RX_SIZE) + +#define A_TP_PARA_REG3 0x36c + +#define S_RX_COALESCING_PSH_DELIVER 0 +#define V_RX_COALESCING_PSH_DELIVER(x) ((x) << S_RX_COALESCING_PSH_DELIVER) +#define F_RX_COALESCING_PSH_DELIVER V_RX_COALESCING_PSH_DELIVER(1U) + +#define S_RX_COALESCING_ENABLE 1 +#define V_RX_COALESCING_ENABLE(x) ((x) << S_RX_COALESCING_ENABLE) +#define F_RX_COALESCING_ENABLE V_RX_COALESCING_ENABLE(1U) + +#define S_TAHOE_ENABLE 2 +#define V_TAHOE_ENABLE(x) ((x) << S_TAHOE_ENABLE) +#define F_TAHOE_ENABLE V_TAHOE_ENABLE(1U) + +#define S_MAX_REORDER_FRAGMENTS 12 +#define M_MAX_REORDER_FRAGMENTS 0x7 +#define V_MAX_REORDER_FRAGMENTS(x) ((x) << S_MAX_REORDER_FRAGMENTS) +#define G_MAX_REORDER_FRAGMENTS(x) (((x) >> S_MAX_REORDER_FRAGMENTS) & M_MAX_REORDER_FRAGMENTS) + +#define A_TP_TIMER_RESOLUTION 0x390 + +#define S_DELAYED_ACK_TIMER_RESOLUTION 0 +#define M_DELAYED_ACK_TIMER_RESOLUTION 0x3f +#define V_DELAYED_ACK_TIMER_RESOLUTION(x) ((x) << S_DELAYED_ACK_TIMER_RESOLUTION) +#define G_DELAYED_ACK_TIMER_RESOLUTION(x) (((x) >> S_DELAYED_ACK_TIMER_RESOLUTION) & M_DELAYED_ACK_TIMER_RESOLUTION) + +#define S_GENERIC_TIMER_RESOLUTION 16 +#define M_GENERIC_TIMER_RESOLUTION 0x3f +#define V_GENERIC_TIMER_RESOLUTION(x) ((x) << S_GENERIC_TIMER_RESOLUTION) +#define G_GENERIC_TIMER_RESOLUTION(x) (((x) >> S_GENERIC_TIMER_RESOLUTION) & M_GENERIC_TIMER_RESOLUTION) + +#define A_TP_2MSL 0x394 + +#define S_2MSL 0 +#define M_2MSL 0x3fffffff +#define V_2MSL(x) ((x) << S_2MSL) +#define G_2MSL(x) (((x) >> S_2MSL) & M_2MSL) + +#define A_TP_RXT_MIN 0x398 + +#define S_RETRANSMIT_TIMER_MIN 0 +#define M_RETRANSMIT_TIMER_MIN 0xffff +#define V_RETRANSMIT_TIMER_MIN(x) ((x) << S_RETRANSMIT_TIMER_MIN) +#define G_RETRANSMIT_TIMER_MIN(x) (((x) >> S_RETRANSMIT_TIMER_MIN) & M_RETRANSMIT_TIMER_MIN) + +#define A_TP_RXT_MAX 0x39c + +#define S_RETRANSMIT_TIMER_MAX 0 +#define M_RETRANSMIT_TIMER_MAX 0x3fffffff +#define V_RETRANSMIT_TIMER_MAX(x) ((x) << S_RETRANSMIT_TIMER_MAX) +#define G_RETRANSMIT_TIMER_MAX(x) (((x) >> S_RETRANSMIT_TIMER_MAX) & M_RETRANSMIT_TIMER_MAX) + +#define A_TP_PERS_MIN 0x3a0 + +#define S_PERSIST_TIMER_MIN 0 +#define M_PERSIST_TIMER_MIN 0xffff +#define V_PERSIST_TIMER_MIN(x) ((x) << S_PERSIST_TIMER_MIN) +#define G_PERSIST_TIMER_MIN(x) (((x) >> S_PERSIST_TIMER_MIN) & M_PERSIST_TIMER_MIN) + +#define A_TP_PERS_MAX 0x3a4 + +#define S_PERSIST_TIMER_MAX 0 +#define M_PERSIST_TIMER_MAX 0x3fffffff +#define V_PERSIST_TIMER_MAX(x) ((x) << S_PERSIST_TIMER_MAX) +#define G_PERSIST_TIMER_MAX(x) (((x) >> S_PERSIST_TIMER_MAX) & M_PERSIST_TIMER_MAX) + +#define A_TP_KEEP_IDLE 0x3ac + +#define S_KEEP_ALIVE_IDLE_TIME 0 +#define M_KEEP_ALIVE_IDLE_TIME 0x3fffffff +#define V_KEEP_ALIVE_IDLE_TIME(x) ((x) << S_KEEP_ALIVE_IDLE_TIME) +#define G_KEEP_ALIVE_IDLE_TIME(x) (((x) >> S_KEEP_ALIVE_IDLE_TIME) & M_KEEP_ALIVE_IDLE_TIME) + +#define A_TP_KEEP_INTVL 0x3b0 + +#define S_KEEP_ALIVE_INTERVAL_TIME 0 +#define M_KEEP_ALIVE_INTERVAL_TIME 0x3fffffff +#define V_KEEP_ALIVE_INTERVAL_TIME(x) ((x) << S_KEEP_ALIVE_INTERVAL_TIME) +#define G_KEEP_ALIVE_INTERVAL_TIME(x) (((x) >> S_KEEP_ALIVE_INTERVAL_TIME) & M_KEEP_ALIVE_INTERVAL_TIME) + +#define A_TP_INIT_SRTT 0x3b4 + +#define S_INITIAL_SRTT 0 +#define M_INITIAL_SRTT 0xffff +#define V_INITIAL_SRTT(x) ((x) << S_INITIAL_SRTT) +#define G_INITIAL_SRTT(x) (((x) >> S_INITIAL_SRTT) & M_INITIAL_SRTT) + +#define A_TP_DACK_TIME 0x3b8 + +#define S_DELAYED_ACK_TIME 0 +#define M_DELAYED_ACK_TIME 0x7ff +#define V_DELAYED_ACK_TIME(x) ((x) << S_DELAYED_ACK_TIME) +#define G_DELAYED_ACK_TIME(x) (((x) >> S_DELAYED_ACK_TIME) & M_DELAYED_ACK_TIME) + +#define A_TP_FINWAIT2_TIME 0x3bc + +#define S_FINWAIT2_TIME 0 +#define M_FINWAIT2_TIME 0x3fffffff +#define V_FINWAIT2_TIME(x) ((x) << S_FINWAIT2_TIME) +#define G_FINWAIT2_TIME(x) (((x) >> S_FINWAIT2_TIME) & M_FINWAIT2_TIME) + +#define A_TP_FAST_FINWAIT2_TIME 0x3c0 + +#define S_FAST_FINWAIT2_TIME 0 +#define M_FAST_FINWAIT2_TIME 0x3fffffff +#define V_FAST_FINWAIT2_TIME(x) ((x) << S_FAST_FINWAIT2_TIME) +#define G_FAST_FINWAIT2_TIME(x) (((x) >> S_FAST_FINWAIT2_TIME) & M_FAST_FINWAIT2_TIME) + +#define A_TP_SHIFT_CNT 0x3c4 + +#define S_KEEPALIVE_MAX 0 +#define M_KEEPALIVE_MAX 0xff +#define V_KEEPALIVE_MAX(x) ((x) << S_KEEPALIVE_MAX) +#define G_KEEPALIVE_MAX(x) (((x) >> S_KEEPALIVE_MAX) & M_KEEPALIVE_MAX) + +#define S_WINDOWPROBE_MAX 8 +#define M_WINDOWPROBE_MAX 0xff +#define V_WINDOWPROBE_MAX(x) ((x) << S_WINDOWPROBE_MAX) +#define G_WINDOWPROBE_MAX(x) (((x) >> S_WINDOWPROBE_MAX) & M_WINDOWPROBE_MAX) + +#define S_RETRANSMISSION_MAX 16 +#define M_RETRANSMISSION_MAX 0xff +#define V_RETRANSMISSION_MAX(x) ((x) << S_RETRANSMISSION_MAX) +#define G_RETRANSMISSION_MAX(x) (((x) >> S_RETRANSMISSION_MAX) & M_RETRANSMISSION_MAX) + +#define S_SYN_MAX 24 +#define M_SYN_MAX 0xff +#define V_SYN_MAX(x) ((x) << S_SYN_MAX) +#define G_SYN_MAX(x) (((x) >> S_SYN_MAX) & M_SYN_MAX) + +#define A_TP_QOS_REG0 0x3e0 + +#define S_L3_VALUE 0 +#define M_L3_VALUE 0x3f +#define V_L3_VALUE(x) ((x) << S_L3_VALUE) +#define G_L3_VALUE(x) (((x) >> S_L3_VALUE) & M_L3_VALUE) + +#define A_TP_QOS_REG1 0x3e4 +#define A_TP_QOS_REG2 0x3e8 +#define A_TP_QOS_REG3 0x3ec +#define A_TP_QOS_REG4 0x3f0 +#define A_TP_QOS_REG5 0x3f4 +#define A_TP_QOS_REG6 0x3f8 +#define A_TP_QOS_REG7 0x3fc +#define A_TP_MTU_REG0 0x404 +#define A_TP_MTU_REG1 0x408 +#define A_TP_MTU_REG2 0x40c +#define A_TP_MTU_REG3 0x410 +#define A_TP_MTU_REG4 0x414 +#define A_TP_MTU_REG5 0x418 +#define A_TP_MTU_REG6 0x41c +#define A_TP_MTU_REG7 0x420 #define A_TP_RESET 0x44c + #define S_TP_RESET 0 #define V_TP_RESET(x) ((x) << S_TP_RESET) #define F_TP_RESET V_TP_RESET(1U) +#define S_CM_MEMMGR_INIT 1 +#define V_CM_MEMMGR_INIT(x) ((x) << S_CM_MEMMGR_INIT) +#define F_CM_MEMMGR_INIT V_CM_MEMMGR_INIT(1U) + +#define A_TP_MIB_INDEX 0x450 +#define A_TP_MIB_DATA 0x454 +#define A_TP_SYNC_TIME_HI 0x458 +#define A_TP_SYNC_TIME_LO 0x45c +#define A_TP_CM_MM_RX_FLST_BASE 0x460 + +#define S_CM_MEMMGR_RX_FREE_LIST_BASE 0 +#define M_CM_MEMMGR_RX_FREE_LIST_BASE 0xfffffff +#define V_CM_MEMMGR_RX_FREE_LIST_BASE(x) ((x) << S_CM_MEMMGR_RX_FREE_LIST_BASE) +#define G_CM_MEMMGR_RX_FREE_LIST_BASE(x) (((x) >> S_CM_MEMMGR_RX_FREE_LIST_BASE) & M_CM_MEMMGR_RX_FREE_LIST_BASE) + +#define A_TP_CM_MM_TX_FLST_BASE 0x464 + +#define S_CM_MEMMGR_TX_FREE_LIST_BASE 0 +#define M_CM_MEMMGR_TX_FREE_LIST_BASE 0xfffffff +#define V_CM_MEMMGR_TX_FREE_LIST_BASE(x) ((x) << S_CM_MEMMGR_TX_FREE_LIST_BASE) +#define G_CM_MEMMGR_TX_FREE_LIST_BASE(x) (((x) >> S_CM_MEMMGR_TX_FREE_LIST_BASE) & M_CM_MEMMGR_TX_FREE_LIST_BASE) + +#define A_TP_CM_MM_P_FLST_BASE 0x468 + +#define S_CM_MEMMGR_PSTRUCT_FREE_LIST_BASE 0 +#define M_CM_MEMMGR_PSTRUCT_FREE_LIST_BASE 0xfffffff +#define V_CM_MEMMGR_PSTRUCT_FREE_LIST_BASE(x) ((x) << S_CM_MEMMGR_PSTRUCT_FREE_LIST_BASE) +#define G_CM_MEMMGR_PSTRUCT_FREE_LIST_BASE(x) (((x) >> S_CM_MEMMGR_PSTRUCT_FREE_LIST_BASE) & M_CM_MEMMGR_PSTRUCT_FREE_LIST_BASE) + +#define A_TP_CM_MM_MAX_P 0x46c + +#define S_CM_MEMMGR_MAX_PSTRUCT 0 +#define M_CM_MEMMGR_MAX_PSTRUCT 0xfffffff +#define V_CM_MEMMGR_MAX_PSTRUCT(x) ((x) << S_CM_MEMMGR_MAX_PSTRUCT) +#define G_CM_MEMMGR_MAX_PSTRUCT(x) (((x) >> S_CM_MEMMGR_MAX_PSTRUCT) & M_CM_MEMMGR_MAX_PSTRUCT) + #define A_TP_INT_ENABLE 0x470 + +#define S_TX_FREE_LIST_EMPTY 0 +#define V_TX_FREE_LIST_EMPTY(x) ((x) << S_TX_FREE_LIST_EMPTY) +#define F_TX_FREE_LIST_EMPTY V_TX_FREE_LIST_EMPTY(1U) + +#define S_RX_FREE_LIST_EMPTY 1 +#define V_RX_FREE_LIST_EMPTY(x) ((x) << S_RX_FREE_LIST_EMPTY) +#define F_RX_FREE_LIST_EMPTY V_RX_FREE_LIST_EMPTY(1U) + #define A_TP_INT_CAUSE 0x474 +#define A_TP_TIMER_SEPARATOR 0x4a4 + +#define S_DISABLE_PAST_TIMER_INSERTION 0 +#define V_DISABLE_PAST_TIMER_INSERTION(x) ((x) << S_DISABLE_PAST_TIMER_INSERTION) +#define F_DISABLE_PAST_TIMER_INSERTION V_DISABLE_PAST_TIMER_INSERTION(1U) + +#define S_MODULATION_TIMER_SEPARATOR 1 +#define M_MODULATION_TIMER_SEPARATOR 0x7fff +#define V_MODULATION_TIMER_SEPARATOR(x) ((x) << S_MODULATION_TIMER_SEPARATOR) +#define G_MODULATION_TIMER_SEPARATOR(x) (((x) >> S_MODULATION_TIMER_SEPARATOR) & M_MODULATION_TIMER_SEPARATOR) + +#define S_GLOBAL_TIMER_SEPARATOR 16 +#define M_GLOBAL_TIMER_SEPARATOR 0xffff +#define V_GLOBAL_TIMER_SEPARATOR(x) ((x) << S_GLOBAL_TIMER_SEPARATOR) +#define G_GLOBAL_TIMER_SEPARATOR(x) (((x) >> S_GLOBAL_TIMER_SEPARATOR) & M_GLOBAL_TIMER_SEPARATOR) + +#define A_TP_CM_FC_MODE 0x4b0 +#define A_TP_PC_CONGESTION_CNTL 0x4b4 #define A_TP_TX_DROP_CONFIG 0x4b8 #define S_ENABLE_TX_DROP 31 @@ -282,12 +1249,108 @@ #define F_ENABLE_TX_ERROR V_ENABLE_TX_ERROR(1U) #define S_DROP_TICKS_CNT 4 +#define M_DROP_TICKS_CNT 0x3ffffff #define V_DROP_TICKS_CNT(x) ((x) << S_DROP_TICKS_CNT) +#define G_DROP_TICKS_CNT(x) (((x) >> S_DROP_TICKS_CNT) & M_DROP_TICKS_CNT) #define S_NUM_PKTS_DROPPED 0 +#define M_NUM_PKTS_DROPPED 0xf #define V_NUM_PKTS_DROPPED(x) ((x) << S_NUM_PKTS_DROPPED) +#define G_NUM_PKTS_DROPPED(x) (((x) >> S_NUM_PKTS_DROPPED) & M_NUM_PKTS_DROPPED) + +#define A_TP_TX_DROP_COUNT 0x4bc + +/* RAT registers */ +#define A_RAT_ROUTE_CONTROL 0x580 + +#define S_USE_ROUTE_TABLE 0 +#define V_USE_ROUTE_TABLE(x) ((x) << S_USE_ROUTE_TABLE) +#define F_USE_ROUTE_TABLE V_USE_ROUTE_TABLE(1U) + +#define S_ENABLE_CSPI 1 +#define V_ENABLE_CSPI(x) ((x) << S_ENABLE_CSPI) +#define F_ENABLE_CSPI V_ENABLE_CSPI(1U) + +#define S_ENABLE_PCIX 2 +#define V_ENABLE_PCIX(x) ((x) << S_ENABLE_PCIX) +#define F_ENABLE_PCIX V_ENABLE_PCIX(1U) + +#define A_RAT_ROUTE_TABLE_INDEX 0x584 + +#define S_ROUTE_TABLE_INDEX 0 +#define M_ROUTE_TABLE_INDEX 0xf +#define V_ROUTE_TABLE_INDEX(x) ((x) << S_ROUTE_TABLE_INDEX) +#define G_ROUTE_TABLE_INDEX(x) (((x) >> S_ROUTE_TABLE_INDEX) & M_ROUTE_TABLE_INDEX) + +#define A_RAT_ROUTE_TABLE_DATA 0x588 +#define A_RAT_NO_ROUTE 0x58c + +#define S_CPL_OPCODE 0 +#define M_CPL_OPCODE 0xff +#define V_CPL_OPCODE(x) ((x) << S_CPL_OPCODE) +#define G_CPL_OPCODE(x) (((x) >> S_CPL_OPCODE) & M_CPL_OPCODE) + +#define A_RAT_INTR_ENABLE 0x590 + +#define S_ZEROROUTEERROR 0 +#define V_ZEROROUTEERROR(x) ((x) << S_ZEROROUTEERROR) +#define F_ZEROROUTEERROR V_ZEROROUTEERROR(1U) + +#define S_CSPIFRAMINGERROR 1 +#define V_CSPIFRAMINGERROR(x) ((x) << S_CSPIFRAMINGERROR) +#define F_CSPIFRAMINGERROR V_CSPIFRAMINGERROR(1U) + +#define S_SGEFRAMINGERROR 2 +#define V_SGEFRAMINGERROR(x) ((x) << S_SGEFRAMINGERROR) +#define F_SGEFRAMINGERROR V_SGEFRAMINGERROR(1U) + +#define S_TPFRAMINGERROR 3 +#define V_TPFRAMINGERROR(x) ((x) << S_TPFRAMINGERROR) +#define F_TPFRAMINGERROR V_TPFRAMINGERROR(1U) + +#define A_RAT_INTR_CAUSE 0x594 /* CSPI registers */ +#define A_CSPI_RX_AE_WM 0x810 +#define A_CSPI_RX_AF_WM 0x814 +#define A_CSPI_CALENDAR_LEN 0x818 + +#define S_CALENDARLENGTH 0 +#define M_CALENDARLENGTH 0xffff +#define V_CALENDARLENGTH(x) ((x) << S_CALENDARLENGTH) +#define G_CALENDARLENGTH(x) (((x) >> S_CALENDARLENGTH) & M_CALENDARLENGTH) + +#define A_CSPI_FIFO_STATUS_ENABLE 0x820 + +#define S_FIFOSTATUSENABLE 0 +#define V_FIFOSTATUSENABLE(x) ((x) << S_FIFOSTATUSENABLE) +#define F_FIFOSTATUSENABLE V_FIFOSTATUSENABLE(1U) + +#define A_CSPI_MAXBURST1_MAXBURST2 0x828 + +#define S_MAXBURST1 0 +#define M_MAXBURST1 0xffff +#define V_MAXBURST1(x) ((x) << S_MAXBURST1) +#define G_MAXBURST1(x) (((x) >> S_MAXBURST1) & M_MAXBURST1) + +#define S_MAXBURST2 16 +#define M_MAXBURST2 0xffff +#define V_MAXBURST2(x) ((x) << S_MAXBURST2) +#define G_MAXBURST2(x) (((x) >> S_MAXBURST2) & M_MAXBURST2) + +#define A_CSPI_TRAIN 0x82c + +#define S_CSPI_TRAIN_ALPHA 0 +#define M_CSPI_TRAIN_ALPHA 0xffff +#define V_CSPI_TRAIN_ALPHA(x) ((x) << S_CSPI_TRAIN_ALPHA) +#define G_CSPI_TRAIN_ALPHA(x) (((x) >> S_CSPI_TRAIN_ALPHA) & M_CSPI_TRAIN_ALPHA) + +#define S_CSPI_TRAIN_DATA_MAXT 16 +#define M_CSPI_TRAIN_DATA_MAXT 0xffff +#define V_CSPI_TRAIN_DATA_MAXT(x) ((x) << S_CSPI_TRAIN_DATA_MAXT) +#define G_CSPI_TRAIN_DATA_MAXT(x) (((x) >> S_CSPI_TRAIN_DATA_MAXT) & M_CSPI_TRAIN_DATA_MAXT) + +#define A_CSPI_INTR_STATUS 0x848 #define S_DIP4ERR 0 #define V_DIP4ERR(x) ((x) << S_DIP4ERR) @@ -309,22 +1372,63 @@ #define V_RAMPARITYERR(x) ((x) << S_RAMPARITYERR) #define F_RAMPARITYERR V_RAMPARITYERR(1U) -/* ESPI registers */ +#define A_CSPI_INTR_ENABLE 0x84c +/* ESPI registers */ #define A_ESPI_SCH_TOKEN0 0x880 + +#define S_SCHTOKEN0 0 +#define M_SCHTOKEN0 0xffff +#define V_SCHTOKEN0(x) ((x) << S_SCHTOKEN0) +#define G_SCHTOKEN0(x) (((x) >> S_SCHTOKEN0) & M_SCHTOKEN0) + #define A_ESPI_SCH_TOKEN1 0x884 + +#define S_SCHTOKEN1 0 +#define M_SCHTOKEN1 0xffff +#define V_SCHTOKEN1(x) ((x) << S_SCHTOKEN1) +#define G_SCHTOKEN1(x) (((x) >> S_SCHTOKEN1) & M_SCHTOKEN1) + #define A_ESPI_SCH_TOKEN2 0x888 + +#define S_SCHTOKEN2 0 +#define M_SCHTOKEN2 0xffff +#define V_SCHTOKEN2(x) ((x) << S_SCHTOKEN2) +#define G_SCHTOKEN2(x) (((x) >> S_SCHTOKEN2) & M_SCHTOKEN2) + #define A_ESPI_SCH_TOKEN3 0x88c + +#define S_SCHTOKEN3 0 +#define M_SCHTOKEN3 0xffff +#define V_SCHTOKEN3(x) ((x) << S_SCHTOKEN3) +#define G_SCHTOKEN3(x) (((x) >> S_SCHTOKEN3) & M_SCHTOKEN3) + #define A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK 0x890 + +#define S_ALMOSTEMPTY 0 +#define M_ALMOSTEMPTY 0xffff +#define V_ALMOSTEMPTY(x) ((x) << S_ALMOSTEMPTY) +#define G_ALMOSTEMPTY(x) (((x) >> S_ALMOSTEMPTY) & M_ALMOSTEMPTY) + #define A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK 0x894 + +#define S_ALMOSTFULL 0 +#define M_ALMOSTFULL 0xffff +#define V_ALMOSTFULL(x) ((x) << S_ALMOSTFULL) +#define G_ALMOSTFULL(x) (((x) >> S_ALMOSTFULL) & M_ALMOSTFULL) + #define A_ESPI_CALENDAR_LENGTH 0x898 #define A_PORT_CONFIG 0x89c #define S_RX_NPORTS 0 +#define M_RX_NPORTS 0xff #define V_RX_NPORTS(x) ((x) << S_RX_NPORTS) +#define G_RX_NPORTS(x) (((x) >> S_RX_NPORTS) & M_RX_NPORTS) #define S_TX_NPORTS 8 +#define M_TX_NPORTS 0xff #define V_TX_NPORTS(x) ((x) << S_TX_NPORTS) +#define G_TX_NPORTS(x) (((x) >> S_TX_NPORTS) & M_TX_NPORTS) #define A_ESPI_FIFO_STATUS_ENABLE 0x8a0 @@ -332,12 +1436,124 @@ #define V_RXSTATUSENABLE(x) ((x) << S_RXSTATUSENABLE) #define F_RXSTATUSENABLE V_RXSTATUSENABLE(1U) +#define S_TXDROPENABLE 1 +#define V_TXDROPENABLE(x) ((x) << S_TXDROPENABLE) +#define F_TXDROPENABLE V_TXDROPENABLE(1U) + +#define S_RXENDIANMODE 2 +#define V_RXENDIANMODE(x) ((x) << S_RXENDIANMODE) +#define F_RXENDIANMODE V_RXENDIANMODE(1U) + +#define S_TXENDIANMODE 3 +#define V_TXENDIANMODE(x) ((x) << S_TXENDIANMODE) +#define F_TXENDIANMODE V_TXENDIANMODE(1U) + #define S_INTEL1010MODE 4 #define V_INTEL1010MODE(x) ((x) << S_INTEL1010MODE) #define F_INTEL1010MODE V_INTEL1010MODE(1U) #define A_ESPI_MAXBURST1_MAXBURST2 0x8a8 #define A_ESPI_TRAIN 0x8ac + +#define S_MAXTRAINALPHA 0 +#define M_MAXTRAINALPHA 0xffff +#define V_MAXTRAINALPHA(x) ((x) << S_MAXTRAINALPHA) +#define G_MAXTRAINALPHA(x) (((x) >> S_MAXTRAINALPHA) & M_MAXTRAINALPHA) + +#define S_MAXTRAINDATA 16 +#define M_MAXTRAINDATA 0xffff +#define V_MAXTRAINDATA(x) ((x) << S_MAXTRAINDATA) +#define G_MAXTRAINDATA(x) (((x) >> S_MAXTRAINDATA) & M_MAXTRAINDATA) + +#define A_RAM_STATUS 0x8b0 + +#define S_RXFIFOPARITYERROR 0 +#define M_RXFIFOPARITYERROR 0x3ff +#define V_RXFIFOPARITYERROR(x) ((x) << S_RXFIFOPARITYERROR) +#define G_RXFIFOPARITYERROR(x) (((x) >> S_RXFIFOPARITYERROR) & M_RXFIFOPARITYERROR) + +#define S_TXFIFOPARITYERROR 10 +#define M_TXFIFOPARITYERROR 0x3ff +#define V_TXFIFOPARITYERROR(x) ((x) << S_TXFIFOPARITYERROR) +#define G_TXFIFOPARITYERROR(x) (((x) >> S_TXFIFOPARITYERROR) & M_TXFIFOPARITYERROR) + +#define S_RXFIFOOVERFLOW 20 +#define M_RXFIFOOVERFLOW 0x3ff +#define V_RXFIFOOVERFLOW(x) ((x) << S_RXFIFOOVERFLOW) +#define G_RXFIFOOVERFLOW(x) (((x) >> S_RXFIFOOVERFLOW) & M_RXFIFOOVERFLOW) + +#define A_TX_DROP_COUNT0 0x8b4 + +#define S_TXPORT0DROPCNT 0 +#define M_TXPORT0DROPCNT 0xffff +#define V_TXPORT0DROPCNT(x) ((x) << S_TXPORT0DROPCNT) +#define G_TXPORT0DROPCNT(x) (((x) >> S_TXPORT0DROPCNT) & M_TXPORT0DROPCNT) + +#define S_TXPORT1DROPCNT 16 +#define M_TXPORT1DROPCNT 0xffff +#define V_TXPORT1DROPCNT(x) ((x) << S_TXPORT1DROPCNT) +#define G_TXPORT1DROPCNT(x) (((x) >> S_TXPORT1DROPCNT) & M_TXPORT1DROPCNT) + +#define A_TX_DROP_COUNT1 0x8b8 + +#define S_TXPORT2DROPCNT 0 +#define M_TXPORT2DROPCNT 0xffff +#define V_TXPORT2DROPCNT(x) ((x) << S_TXPORT2DROPCNT) +#define G_TXPORT2DROPCNT(x) (((x) >> S_TXPORT2DROPCNT) & M_TXPORT2DROPCNT) + +#define S_TXPORT3DROPCNT 16 +#define M_TXPORT3DROPCNT 0xffff +#define V_TXPORT3DROPCNT(x) ((x) << S_TXPORT3DROPCNT) +#define G_TXPORT3DROPCNT(x) (((x) >> S_TXPORT3DROPCNT) & M_TXPORT3DROPCNT) + +#define A_RX_DROP_COUNT0 0x8bc + +#define S_RXPORT0DROPCNT 0 +#define M_RXPORT0DROPCNT 0xffff +#define V_RXPORT0DROPCNT(x) ((x) << S_RXPORT0DROPCNT) +#define G_RXPORT0DROPCNT(x) (((x) >> S_RXPORT0DROPCNT) & M_RXPORT0DROPCNT) + +#define S_RXPORT1DROPCNT 16 +#define M_RXPORT1DROPCNT 0xffff +#define V_RXPORT1DROPCNT(x) ((x) << S_RXPORT1DROPCNT) +#define G_RXPORT1DROPCNT(x) (((x) >> S_RXPORT1DROPCNT) & M_RXPORT1DROPCNT) + +#define A_RX_DROP_COUNT1 0x8c0 + +#define S_RXPORT2DROPCNT 0 +#define M_RXPORT2DROPCNT 0xffff +#define V_RXPORT2DROPCNT(x) ((x) << S_RXPORT2DROPCNT) +#define G_RXPORT2DROPCNT(x) (((x) >> S_RXPORT2DROPCNT) & M_RXPORT2DROPCNT) + +#define S_RXPORT3DROPCNT 16 +#define M_RXPORT3DROPCNT 0xffff +#define V_RXPORT3DROPCNT(x) ((x) << S_RXPORT3DROPCNT) +#define G_RXPORT3DROPCNT(x) (((x) >> S_RXPORT3DROPCNT) & M_RXPORT3DROPCNT) + +#define A_DIP4_ERROR_COUNT 0x8c4 + +#define S_DIP4ERRORCNT 0 +#define M_DIP4ERRORCNT 0xfff +#define V_DIP4ERRORCNT(x) ((x) << S_DIP4ERRORCNT) +#define G_DIP4ERRORCNT(x) (((x) >> S_DIP4ERRORCNT) & M_DIP4ERRORCNT) + +#define S_DIP4ERRORCNTSHADOW 12 +#define M_DIP4ERRORCNTSHADOW 0xfff +#define V_DIP4ERRORCNTSHADOW(x) ((x) << S_DIP4ERRORCNTSHADOW) +#define G_DIP4ERRORCNTSHADOW(x) (((x) >> S_DIP4ERRORCNTSHADOW) & M_DIP4ERRORCNTSHADOW) + +#define S_TRICN_RX_TRAIN_ERR 24 +#define V_TRICN_RX_TRAIN_ERR(x) ((x) << S_TRICN_RX_TRAIN_ERR) +#define F_TRICN_RX_TRAIN_ERR V_TRICN_RX_TRAIN_ERR(1U) + +#define S_TRICN_RX_TRAINING 25 +#define V_TRICN_RX_TRAINING(x) ((x) << S_TRICN_RX_TRAINING) +#define F_TRICN_RX_TRAINING V_TRICN_RX_TRAINING(1U) + +#define S_TRICN_RX_TRAIN_OK 26 +#define V_TRICN_RX_TRAIN_OK(x) ((x) << S_TRICN_RX_TRAIN_OK) +#define F_TRICN_RX_TRAIN_OK V_TRICN_RX_TRAIN_OK(1U) + #define A_ESPI_INTR_STATUS 0x8c8 #define S_DIP2PARITYERR 5 @@ -347,19 +1563,56 @@ #define A_ESPI_INTR_ENABLE 0x8cc #define A_RX_DROP_THRESHOLD 0x8d0 #define A_ESPI_RX_RESET 0x8ec + +#define S_ESPI_RX_LNK_RST 0 +#define V_ESPI_RX_LNK_RST(x) ((x) << S_ESPI_RX_LNK_RST) +#define F_ESPI_RX_LNK_RST V_ESPI_RX_LNK_RST(1U) + +#define S_ESPI_RX_CORE_RST 1 +#define V_ESPI_RX_CORE_RST(x) ((x) << S_ESPI_RX_CORE_RST) +#define F_ESPI_RX_CORE_RST V_ESPI_RX_CORE_RST(1U) + +#define S_RX_CLK_STATUS 2 +#define V_RX_CLK_STATUS(x) ((x) << S_RX_CLK_STATUS) +#define F_RX_CLK_STATUS V_RX_CLK_STATUS(1U) + #define A_ESPI_MISC_CONTROL 0x8f0 #define S_OUT_OF_SYNC_COUNT 0 +#define M_OUT_OF_SYNC_COUNT 0xf #define V_OUT_OF_SYNC_COUNT(x) ((x) << S_OUT_OF_SYNC_COUNT) +#define G_OUT_OF_SYNC_COUNT(x) (((x) >> S_OUT_OF_SYNC_COUNT) & M_OUT_OF_SYNC_COUNT) + +#define S_DIP2_COUNT_MODE_ENABLE 4 +#define V_DIP2_COUNT_MODE_ENABLE(x) ((x) << S_DIP2_COUNT_MODE_ENABLE) +#define F_DIP2_COUNT_MODE_ENABLE V_DIP2_COUNT_MODE_ENABLE(1U) #define S_DIP2_PARITY_ERR_THRES 5 +#define M_DIP2_PARITY_ERR_THRES 0xf #define V_DIP2_PARITY_ERR_THRES(x) ((x) << S_DIP2_PARITY_ERR_THRES) +#define G_DIP2_PARITY_ERR_THRES(x) (((x) >> S_DIP2_PARITY_ERR_THRES) & M_DIP2_PARITY_ERR_THRES) #define S_DIP4_THRES 9 +#define M_DIP4_THRES 0xfff #define V_DIP4_THRES(x) ((x) << S_DIP4_THRES) +#define G_DIP4_THRES(x) (((x) >> S_DIP4_THRES) & M_DIP4_THRES) + +#define S_DIP4_THRES_ENABLE 21 +#define V_DIP4_THRES_ENABLE(x) ((x) << S_DIP4_THRES_ENABLE) +#define F_DIP4_THRES_ENABLE V_DIP4_THRES_ENABLE(1U) + +#define S_FORCE_DISABLE_STATUS 22 +#define V_FORCE_DISABLE_STATUS(x) ((x) << S_FORCE_DISABLE_STATUS) +#define F_FORCE_DISABLE_STATUS V_FORCE_DISABLE_STATUS(1U) + +#define S_DYNAMIC_DESKEW 23 +#define V_DYNAMIC_DESKEW(x) ((x) << S_DYNAMIC_DESKEW) +#define F_DYNAMIC_DESKEW V_DYNAMIC_DESKEW(1U) #define S_MONITORED_PORT_NUM 25 +#define M_MONITORED_PORT_NUM 0x3 #define V_MONITORED_PORT_NUM(x) ((x) << S_MONITORED_PORT_NUM) +#define G_MONITORED_PORT_NUM(x) (((x) >> S_MONITORED_PORT_NUM) & M_MONITORED_PORT_NUM) #define S_MONITORED_DIRECTION 27 #define V_MONITORED_DIRECTION(x) ((x) << S_MONITORED_DIRECTION) @@ -370,33 +1623,125 @@ #define F_MONITORED_INTERFACE V_MONITORED_INTERFACE(1U) #define A_ESPI_DIP2_ERR_COUNT 0x8f4 + +#define S_DIP2_ERR_CNT 0 +#define M_DIP2_ERR_CNT 0xf +#define V_DIP2_ERR_CNT(x) ((x) << S_DIP2_ERR_CNT) +#define G_DIP2_ERR_CNT(x) (((x) >> S_DIP2_ERR_CNT) & M_DIP2_ERR_CNT) + #define A_ESPI_CMD_ADDR 0x8f8 #define S_WRITE_DATA 0 +#define M_WRITE_DATA 0xff #define V_WRITE_DATA(x) ((x) << S_WRITE_DATA) +#define G_WRITE_DATA(x) (((x) >> S_WRITE_DATA) & M_WRITE_DATA) #define S_REGISTER_OFFSET 8 +#define M_REGISTER_OFFSET 0xf #define V_REGISTER_OFFSET(x) ((x) << S_REGISTER_OFFSET) +#define G_REGISTER_OFFSET(x) (((x) >> S_REGISTER_OFFSET) & M_REGISTER_OFFSET) #define S_CHANNEL_ADDR 12 +#define M_CHANNEL_ADDR 0xf #define V_CHANNEL_ADDR(x) ((x) << S_CHANNEL_ADDR) +#define G_CHANNEL_ADDR(x) (((x) >> S_CHANNEL_ADDR) & M_CHANNEL_ADDR) #define S_MODULE_ADDR 16 +#define M_MODULE_ADDR 0x3 #define V_MODULE_ADDR(x) ((x) << S_MODULE_ADDR) +#define G_MODULE_ADDR(x) (((x) >> S_MODULE_ADDR) & M_MODULE_ADDR) #define S_BUNDLE_ADDR 20 +#define M_BUNDLE_ADDR 0x3 #define V_BUNDLE_ADDR(x) ((x) << S_BUNDLE_ADDR) +#define G_BUNDLE_ADDR(x) (((x) >> S_BUNDLE_ADDR) & M_BUNDLE_ADDR) #define S_SPI4_COMMAND 24 +#define M_SPI4_COMMAND 0xff #define V_SPI4_COMMAND(x) ((x) << S_SPI4_COMMAND) +#define G_SPI4_COMMAND(x) (((x) >> S_SPI4_COMMAND) & M_SPI4_COMMAND) #define A_ESPI_GOSTAT 0x8fc + +#define S_READ_DATA 0 +#define M_READ_DATA 0xff +#define V_READ_DATA(x) ((x) << S_READ_DATA) +#define G_READ_DATA(x) (((x) >> S_READ_DATA) & M_READ_DATA) + #define S_ESPI_CMD_BUSY 8 #define V_ESPI_CMD_BUSY(x) ((x) << S_ESPI_CMD_BUSY) #define F_ESPI_CMD_BUSY V_ESPI_CMD_BUSY(1U) -/* PL registers */ +#define S_ERROR_ACK 9 +#define V_ERROR_ACK(x) ((x) << S_ERROR_ACK) +#define F_ERROR_ACK V_ERROR_ACK(1U) + +#define S_UNMAPPED_ERR 10 +#define V_UNMAPPED_ERR(x) ((x) << S_UNMAPPED_ERR) +#define F_UNMAPPED_ERR V_UNMAPPED_ERR(1U) + +#define S_TRANSACTION_TIMER 16 +#define M_TRANSACTION_TIMER 0xff +#define V_TRANSACTION_TIMER(x) ((x) << S_TRANSACTION_TIMER) +#define G_TRANSACTION_TIMER(x) (((x) >> S_TRANSACTION_TIMER) & M_TRANSACTION_TIMER) + + +/* ULP registers */ +#define A_ULP_ULIMIT 0x980 +#define A_ULP_TAGMASK 0x984 +#define A_ULP_HREG_INDEX 0x988 +#define A_ULP_HREG_DATA 0x98c +#define A_ULP_INT_ENABLE 0x990 +#define A_ULP_INT_CAUSE 0x994 +#define S_HREG_PAR_ERR 0 +#define V_HREG_PAR_ERR(x) ((x) << S_HREG_PAR_ERR) +#define F_HREG_PAR_ERR V_HREG_PAR_ERR(1U) + +#define S_EGRS_DATA_PAR_ERR 1 +#define V_EGRS_DATA_PAR_ERR(x) ((x) << S_EGRS_DATA_PAR_ERR) +#define F_EGRS_DATA_PAR_ERR V_EGRS_DATA_PAR_ERR(1U) + +#define S_INGRS_DATA_PAR_ERR 2 +#define V_INGRS_DATA_PAR_ERR(x) ((x) << S_INGRS_DATA_PAR_ERR) +#define F_INGRS_DATA_PAR_ERR V_INGRS_DATA_PAR_ERR(1U) + +#define S_PM_INTR 3 +#define V_PM_INTR(x) ((x) << S_PM_INTR) +#define F_PM_INTR V_PM_INTR(1U) + +#define S_PM_E2C_SYNC_ERR 4 +#define V_PM_E2C_SYNC_ERR(x) ((x) << S_PM_E2C_SYNC_ERR) +#define F_PM_E2C_SYNC_ERR V_PM_E2C_SYNC_ERR(1U) + +#define S_PM_C2E_SYNC_ERR 5 +#define V_PM_C2E_SYNC_ERR(x) ((x) << S_PM_C2E_SYNC_ERR) +#define F_PM_C2E_SYNC_ERR V_PM_C2E_SYNC_ERR(1U) + +#define S_PM_E2C_EMPTY_ERR 6 +#define V_PM_E2C_EMPTY_ERR(x) ((x) << S_PM_E2C_EMPTY_ERR) +#define F_PM_E2C_EMPTY_ERR V_PM_E2C_EMPTY_ERR(1U) + +#define S_PM_C2E_EMPTY_ERR 7 +#define V_PM_C2E_EMPTY_ERR(x) ((x) << S_PM_C2E_EMPTY_ERR) +#define F_PM_C2E_EMPTY_ERR V_PM_C2E_EMPTY_ERR(1U) + +#define S_PM_PAR_ERR 8 +#define M_PM_PAR_ERR 0xffff +#define V_PM_PAR_ERR(x) ((x) << S_PM_PAR_ERR) +#define G_PM_PAR_ERR(x) (((x) >> S_PM_PAR_ERR) & M_PM_PAR_ERR) + +#define S_PM_E2C_WRT_FULL 24 +#define V_PM_E2C_WRT_FULL(x) ((x) << S_PM_E2C_WRT_FULL) +#define F_PM_E2C_WRT_FULL V_PM_E2C_WRT_FULL(1U) + +#define S_PM_C2E_WRT_FULL 25 +#define V_PM_C2E_WRT_FULL(x) ((x) << S_PM_C2E_WRT_FULL) +#define F_PM_C2E_WRT_FULL V_PM_C2E_WRT_FULL(1U) + +#define A_ULP_PIO_CTRL 0x998 + +/* PL registers */ #define A_PL_ENABLE 0xa00 #define S_PL_INTR_SGE_ERR 0 @@ -407,14 +1752,38 @@ #define V_PL_INTR_SGE_DATA(x) ((x) << S_PL_INTR_SGE_DATA) #define F_PL_INTR_SGE_DATA V_PL_INTR_SGE_DATA(1U) +#define S_PL_INTR_MC3 2 +#define V_PL_INTR_MC3(x) ((x) << S_PL_INTR_MC3) +#define F_PL_INTR_MC3 V_PL_INTR_MC3(1U) + +#define S_PL_INTR_MC4 3 +#define V_PL_INTR_MC4(x) ((x) << S_PL_INTR_MC4) +#define F_PL_INTR_MC4 V_PL_INTR_MC4(1U) + +#define S_PL_INTR_MC5 4 +#define V_PL_INTR_MC5(x) ((x) << S_PL_INTR_MC5) +#define F_PL_INTR_MC5 V_PL_INTR_MC5(1U) + +#define S_PL_INTR_RAT 5 +#define V_PL_INTR_RAT(x) ((x) << S_PL_INTR_RAT) +#define F_PL_INTR_RAT V_PL_INTR_RAT(1U) + #define S_PL_INTR_TP 6 #define V_PL_INTR_TP(x) ((x) << S_PL_INTR_TP) #define F_PL_INTR_TP V_PL_INTR_TP(1U) +#define S_PL_INTR_ULP 7 +#define V_PL_INTR_ULP(x) ((x) << S_PL_INTR_ULP) +#define F_PL_INTR_ULP V_PL_INTR_ULP(1U) + #define S_PL_INTR_ESPI 8 #define V_PL_INTR_ESPI(x) ((x) << S_PL_INTR_ESPI) #define F_PL_INTR_ESPI V_PL_INTR_ESPI(1U) +#define S_PL_INTR_CSPI 9 +#define V_PL_INTR_CSPI(x) ((x) << S_PL_INTR_CSPI) +#define F_PL_INTR_CSPI V_PL_INTR_CSPI(1U) + #define S_PL_INTR_PCIX 10 #define V_PL_INTR_PCIX(x) ((x) << S_PL_INTR_PCIX) #define F_PL_INTR_PCIX V_PL_INTR_PCIX(1U) @@ -426,43 +1795,374 @@ #define A_PL_CAUSE 0xa04 /* MC5 registers */ - #define A_MC5_CONFIG 0xc04 +#define S_MODE 0 +#define V_MODE(x) ((x) << S_MODE) +#define F_MODE V_MODE(1U) + #define S_TCAM_RESET 1 #define V_TCAM_RESET(x) ((x) << S_TCAM_RESET) #define F_TCAM_RESET V_TCAM_RESET(1U) +#define S_TCAM_READY 2 +#define V_TCAM_READY(x) ((x) << S_TCAM_READY) +#define F_TCAM_READY V_TCAM_READY(1U) + +#define S_DBGI_ENABLE 4 +#define V_DBGI_ENABLE(x) ((x) << S_DBGI_ENABLE) +#define F_DBGI_ENABLE V_DBGI_ENABLE(1U) + #define S_M_BUS_ENABLE 5 #define V_M_BUS_ENABLE(x) ((x) << S_M_BUS_ENABLE) #define F_M_BUS_ENABLE V_M_BUS_ENABLE(1U) -/* PCICFG registers */ +#define S_PARITY_ENABLE 6 +#define V_PARITY_ENABLE(x) ((x) << S_PARITY_ENABLE) +#define F_PARITY_ENABLE V_PARITY_ENABLE(1U) + +#define S_SYN_ISSUE_MODE 7 +#define M_SYN_ISSUE_MODE 0x3 +#define V_SYN_ISSUE_MODE(x) ((x) << S_SYN_ISSUE_MODE) +#define G_SYN_ISSUE_MODE(x) (((x) >> S_SYN_ISSUE_MODE) & M_SYN_ISSUE_MODE) + +#define S_BUILD 16 +#define V_BUILD(x) ((x) << S_BUILD) +#define F_BUILD V_BUILD(1U) + +#define S_COMPRESSION_ENABLE 17 +#define V_COMPRESSION_ENABLE(x) ((x) << S_COMPRESSION_ENABLE) +#define F_COMPRESSION_ENABLE V_COMPRESSION_ENABLE(1U) + +#define S_NUM_LIP 18 +#define M_NUM_LIP 0x3f +#define V_NUM_LIP(x) ((x) << S_NUM_LIP) +#define G_NUM_LIP(x) (((x) >> S_NUM_LIP) & M_NUM_LIP) + +#define S_TCAM_PART_CNT 24 +#define M_TCAM_PART_CNT 0x3 +#define V_TCAM_PART_CNT(x) ((x) << S_TCAM_PART_CNT) +#define G_TCAM_PART_CNT(x) (((x) >> S_TCAM_PART_CNT) & M_TCAM_PART_CNT) + +#define S_TCAM_PART_TYPE 26 +#define M_TCAM_PART_TYPE 0x3 +#define V_TCAM_PART_TYPE(x) ((x) << S_TCAM_PART_TYPE) +#define G_TCAM_PART_TYPE(x) (((x) >> S_TCAM_PART_TYPE) & M_TCAM_PART_TYPE) + +#define S_TCAM_PART_SIZE 28 +#define M_TCAM_PART_SIZE 0x3 +#define V_TCAM_PART_SIZE(x) ((x) << S_TCAM_PART_SIZE) +#define G_TCAM_PART_SIZE(x) (((x) >> S_TCAM_PART_SIZE) & M_TCAM_PART_SIZE) + +#define S_TCAM_PART_TYPE_HI 30 +#define V_TCAM_PART_TYPE_HI(x) ((x) << S_TCAM_PART_TYPE_HI) +#define F_TCAM_PART_TYPE_HI V_TCAM_PART_TYPE_HI(1U) + +#define A_MC5_SIZE 0xc08 + +#define S_SIZE 0 +#define M_SIZE 0x3fffff +#define V_SIZE(x) ((x) << S_SIZE) +#define G_SIZE(x) (((x) >> S_SIZE) & M_SIZE) + +#define A_MC5_ROUTING_TABLE_INDEX 0xc0c +#define S_START_OF_ROUTING_TABLE 0 +#define M_START_OF_ROUTING_TABLE 0x3fffff +#define V_START_OF_ROUTING_TABLE(x) ((x) << S_START_OF_ROUTING_TABLE) +#define G_START_OF_ROUTING_TABLE(x) (((x) >> S_START_OF_ROUTING_TABLE) & M_START_OF_ROUTING_TABLE) + +#define A_MC5_SERVER_INDEX 0xc14 + +#define S_START_OF_SERVER_INDEX 0 +#define M_START_OF_SERVER_INDEX 0x3fffff +#define V_START_OF_SERVER_INDEX(x) ((x) << S_START_OF_SERVER_INDEX) +#define G_START_OF_SERVER_INDEX(x) (((x) >> S_START_OF_SERVER_INDEX) & M_START_OF_SERVER_INDEX) + +#define A_MC5_LIP_RAM_ADDR 0xc18 + +#define S_LOCAL_IP_RAM_ADDR 0 +#define M_LOCAL_IP_RAM_ADDR 0x3f +#define V_LOCAL_IP_RAM_ADDR(x) ((x) << S_LOCAL_IP_RAM_ADDR) +#define G_LOCAL_IP_RAM_ADDR(x) (((x) >> S_LOCAL_IP_RAM_ADDR) & M_LOCAL_IP_RAM_ADDR) + +#define S_RAM_WRITE_ENABLE 8 +#define V_RAM_WRITE_ENABLE(x) ((x) << S_RAM_WRITE_ENABLE) +#define F_RAM_WRITE_ENABLE V_RAM_WRITE_ENABLE(1U) + +#define A_MC5_LIP_RAM_DATA 0xc1c +#define A_MC5_RSP_LATENCY 0xc20 + +#define S_SEARCH_RESPONSE_LATENCY 0 +#define M_SEARCH_RESPONSE_LATENCY 0x1f +#define V_SEARCH_RESPONSE_LATENCY(x) ((x) << S_SEARCH_RESPONSE_LATENCY) +#define G_SEARCH_RESPONSE_LATENCY(x) (((x) >> S_SEARCH_RESPONSE_LATENCY) & M_SEARCH_RESPONSE_LATENCY) + +#define S_LEARN_RESPONSE_LATENCY 8 +#define M_LEARN_RESPONSE_LATENCY 0x1f +#define V_LEARN_RESPONSE_LATENCY(x) ((x) << S_LEARN_RESPONSE_LATENCY) +#define G_LEARN_RESPONSE_LATENCY(x) (((x) >> S_LEARN_RESPONSE_LATENCY) & M_LEARN_RESPONSE_LATENCY) + +#define A_MC5_PARITY_LATENCY 0xc24 + +#define S_SRCHLAT 0 +#define M_SRCHLAT 0x1f +#define V_SRCHLAT(x) ((x) << S_SRCHLAT) +#define G_SRCHLAT(x) (((x) >> S_SRCHLAT) & M_SRCHLAT) + +#define S_PARLAT 8 +#define M_PARLAT 0x1f +#define V_PARLAT(x) ((x) << S_PARLAT) +#define G_PARLAT(x) (((x) >> S_PARLAT) & M_PARLAT) + +#define A_MC5_WR_LRN_VERIFY 0xc28 + +#define S_POVEREN 0 +#define V_POVEREN(x) ((x) << S_POVEREN) +#define F_POVEREN V_POVEREN(1U) + +#define S_LRNVEREN 1 +#define V_LRNVEREN(x) ((x) << S_LRNVEREN) +#define F_LRNVEREN V_LRNVEREN(1U) + +#define S_VWVEREN 2 +#define V_VWVEREN(x) ((x) << S_VWVEREN) +#define F_VWVEREN V_VWVEREN(1U) + +#define A_MC5_PART_ID_INDEX 0xc2c + +#define S_IDINDEX 0 +#define M_IDINDEX 0xf +#define V_IDINDEX(x) ((x) << S_IDINDEX) +#define G_IDINDEX(x) (((x) >> S_IDINDEX) & M_IDINDEX) + +#define A_MC5_RESET_MAX 0xc30 + +#define S_RSTMAX 0 +#define M_RSTMAX 0x1ff +#define V_RSTMAX(x) ((x) << S_RSTMAX) +#define G_RSTMAX(x) (((x) >> S_RSTMAX) & M_RSTMAX) + +#define A_MC5_INT_ENABLE 0xc40 + +#define S_MC5_INT_HIT_OUT_ACTIVE_REGION_ERR 0 +#define V_MC5_INT_HIT_OUT_ACTIVE_REGION_ERR(x) ((x) << S_MC5_INT_HIT_OUT_ACTIVE_REGION_ERR) +#define F_MC5_INT_HIT_OUT_ACTIVE_REGION_ERR V_MC5_INT_HIT_OUT_ACTIVE_REGION_ERR(1U) + +#define S_MC5_INT_HIT_IN_ACTIVE_REGION_ERR 1 +#define V_MC5_INT_HIT_IN_ACTIVE_REGION_ERR(x) ((x) << S_MC5_INT_HIT_IN_ACTIVE_REGION_ERR) +#define F_MC5_INT_HIT_IN_ACTIVE_REGION_ERR V_MC5_INT_HIT_IN_ACTIVE_REGION_ERR(1U) + +#define S_MC5_INT_HIT_IN_RT_REGION_ERR 2 +#define V_MC5_INT_HIT_IN_RT_REGION_ERR(x) ((x) << S_MC5_INT_HIT_IN_RT_REGION_ERR) +#define F_MC5_INT_HIT_IN_RT_REGION_ERR V_MC5_INT_HIT_IN_RT_REGION_ERR(1U) + +#define S_MC5_INT_MISS_ERR 3 +#define V_MC5_INT_MISS_ERR(x) ((x) << S_MC5_INT_MISS_ERR) +#define F_MC5_INT_MISS_ERR V_MC5_INT_MISS_ERR(1U) + +#define S_MC5_INT_LIP0_ERR 4 +#define V_MC5_INT_LIP0_ERR(x) ((x) << S_MC5_INT_LIP0_ERR) +#define F_MC5_INT_LIP0_ERR V_MC5_INT_LIP0_ERR(1U) + +#define S_MC5_INT_LIP_MISS_ERR 5 +#define V_MC5_INT_LIP_MISS_ERR(x) ((x) << S_MC5_INT_LIP_MISS_ERR) +#define F_MC5_INT_LIP_MISS_ERR V_MC5_INT_LIP_MISS_ERR(1U) + +#define S_MC5_INT_PARITY_ERR 6 +#define V_MC5_INT_PARITY_ERR(x) ((x) << S_MC5_INT_PARITY_ERR) +#define F_MC5_INT_PARITY_ERR V_MC5_INT_PARITY_ERR(1U) + +#define S_MC5_INT_ACTIVE_REGION_FULL 7 +#define V_MC5_INT_ACTIVE_REGION_FULL(x) ((x) << S_MC5_INT_ACTIVE_REGION_FULL) +#define F_MC5_INT_ACTIVE_REGION_FULL V_MC5_INT_ACTIVE_REGION_FULL(1U) + +#define S_MC5_INT_NFA_SRCH_ERR 8 +#define V_MC5_INT_NFA_SRCH_ERR(x) ((x) << S_MC5_INT_NFA_SRCH_ERR) +#define F_MC5_INT_NFA_SRCH_ERR V_MC5_INT_NFA_SRCH_ERR(1U) + +#define S_MC5_INT_SYN_COOKIE 9 +#define V_MC5_INT_SYN_COOKIE(x) ((x) << S_MC5_INT_SYN_COOKIE) +#define F_MC5_INT_SYN_COOKIE V_MC5_INT_SYN_COOKIE(1U) + +#define S_MC5_INT_SYN_COOKIE_BAD 10 +#define V_MC5_INT_SYN_COOKIE_BAD(x) ((x) << S_MC5_INT_SYN_COOKIE_BAD) +#define F_MC5_INT_SYN_COOKIE_BAD V_MC5_INT_SYN_COOKIE_BAD(1U) + +#define S_MC5_INT_SYN_COOKIE_OFF 11 +#define V_MC5_INT_SYN_COOKIE_OFF(x) ((x) << S_MC5_INT_SYN_COOKIE_OFF) +#define F_MC5_INT_SYN_COOKIE_OFF V_MC5_INT_SYN_COOKIE_OFF(1U) + +#define S_MC5_INT_UNKNOWN_CMD 15 +#define V_MC5_INT_UNKNOWN_CMD(x) ((x) << S_MC5_INT_UNKNOWN_CMD) +#define F_MC5_INT_UNKNOWN_CMD V_MC5_INT_UNKNOWN_CMD(1U) + +#define S_MC5_INT_REQUESTQ_PARITY_ERR 16 +#define V_MC5_INT_REQUESTQ_PARITY_ERR(x) ((x) << S_MC5_INT_REQUESTQ_PARITY_ERR) +#define F_MC5_INT_REQUESTQ_PARITY_ERR V_MC5_INT_REQUESTQ_PARITY_ERR(1U) + +#define S_MC5_INT_DISPATCHQ_PARITY_ERR 17 +#define V_MC5_INT_DISPATCHQ_PARITY_ERR(x) ((x) << S_MC5_INT_DISPATCHQ_PARITY_ERR) +#define F_MC5_INT_DISPATCHQ_PARITY_ERR V_MC5_INT_DISPATCHQ_PARITY_ERR(1U) + +#define S_MC5_INT_DEL_ACT_EMPTY 18 +#define V_MC5_INT_DEL_ACT_EMPTY(x) ((x) << S_MC5_INT_DEL_ACT_EMPTY) +#define F_MC5_INT_DEL_ACT_EMPTY V_MC5_INT_DEL_ACT_EMPTY(1U) + +#define A_MC5_INT_CAUSE 0xc44 +#define A_MC5_INT_TID 0xc48 +#define A_MC5_INT_PTID 0xc4c +#define A_MC5_DBGI_CONFIG 0xc74 +#define A_MC5_DBGI_REQ_CMD 0xc78 + +#define S_CMDMODE 0 +#define M_CMDMODE 0x7 +#define V_CMDMODE(x) ((x) << S_CMDMODE) +#define G_CMDMODE(x) (((x) >> S_CMDMODE) & M_CMDMODE) + +#define S_SADRSEL 4 +#define V_SADRSEL(x) ((x) << S_SADRSEL) +#define F_SADRSEL V_SADRSEL(1U) + +#define S_WRITE_BURST_SIZE 22 +#define M_WRITE_BURST_SIZE 0x3ff +#define V_WRITE_BURST_SIZE(x) ((x) << S_WRITE_BURST_SIZE) +#define G_WRITE_BURST_SIZE(x) (((x) >> S_WRITE_BURST_SIZE) & M_WRITE_BURST_SIZE) + +#define A_MC5_DBGI_REQ_ADDR0 0xc7c +#define A_MC5_DBGI_REQ_ADDR1 0xc80 +#define A_MC5_DBGI_REQ_ADDR2 0xc84 +#define A_MC5_DBGI_REQ_DATA0 0xc88 +#define A_MC5_DBGI_REQ_DATA1 0xc8c +#define A_MC5_DBGI_REQ_DATA2 0xc90 +#define A_MC5_DBGI_REQ_DATA3 0xc94 +#define A_MC5_DBGI_REQ_DATA4 0xc98 +#define A_MC5_DBGI_REQ_MASK0 0xc9c +#define A_MC5_DBGI_REQ_MASK1 0xca0 +#define A_MC5_DBGI_REQ_MASK2 0xca4 +#define A_MC5_DBGI_REQ_MASK3 0xca8 +#define A_MC5_DBGI_REQ_MASK4 0xcac +#define A_MC5_DBGI_RSP_STATUS 0xcb0 + +#define S_DBGI_RSP_VALID 0 +#define V_DBGI_RSP_VALID(x) ((x) << S_DBGI_RSP_VALID) +#define F_DBGI_RSP_VALID V_DBGI_RSP_VALID(1U) + +#define S_DBGI_RSP_HIT 1 +#define V_DBGI_RSP_HIT(x) ((x) << S_DBGI_RSP_HIT) +#define F_DBGI_RSP_HIT V_DBGI_RSP_HIT(1U) + +#define S_DBGI_RSP_ERR 2 +#define V_DBGI_RSP_ERR(x) ((x) << S_DBGI_RSP_ERR) +#define F_DBGI_RSP_ERR V_DBGI_RSP_ERR(1U) + +#define S_DBGI_RSP_ERR_REASON 8 +#define M_DBGI_RSP_ERR_REASON 0x7 +#define V_DBGI_RSP_ERR_REASON(x) ((x) << S_DBGI_RSP_ERR_REASON) +#define G_DBGI_RSP_ERR_REASON(x) (((x) >> S_DBGI_RSP_ERR_REASON) & M_DBGI_RSP_ERR_REASON) + +#define A_MC5_DBGI_RSP_DATA0 0xcb4 +#define A_MC5_DBGI_RSP_DATA1 0xcb8 +#define A_MC5_DBGI_RSP_DATA2 0xcbc +#define A_MC5_DBGI_RSP_DATA3 0xcc0 +#define A_MC5_DBGI_RSP_DATA4 0xcc4 +#define A_MC5_DBGI_RSP_LAST_CMD 0xcc8 +#define A_MC5_POPEN_DATA_WR_CMD 0xccc +#define A_MC5_POPEN_MASK_WR_CMD 0xcd0 +#define A_MC5_AOPEN_SRCH_CMD 0xcd4 +#define A_MC5_AOPEN_LRN_CMD 0xcd8 +#define A_MC5_SYN_SRCH_CMD 0xcdc +#define A_MC5_SYN_LRN_CMD 0xce0 +#define A_MC5_ACK_SRCH_CMD 0xce4 +#define A_MC5_ACK_LRN_CMD 0xce8 +#define A_MC5_ILOOKUP_CMD 0xcec +#define A_MC5_ELOOKUP_CMD 0xcf0 +#define A_MC5_DATA_WRITE_CMD 0xcf4 +#define A_MC5_DATA_READ_CMD 0xcf8 +#define A_MC5_MASK_WRITE_CMD 0xcfc + +/* PCICFG registers */ #define A_PCICFG_PM_CSR 0x44 #define A_PCICFG_VPD_ADDR 0x4a +#define S_VPD_ADDR 0 +#define M_VPD_ADDR 0x7fff +#define V_VPD_ADDR(x) ((x) << S_VPD_ADDR) +#define G_VPD_ADDR(x) (((x) >> S_VPD_ADDR) & M_VPD_ADDR) + #define S_VPD_OP_FLAG 15 #define V_VPD_OP_FLAG(x) ((x) << S_VPD_OP_FLAG) #define F_VPD_OP_FLAG V_VPD_OP_FLAG(1U) #define A_PCICFG_VPD_DATA 0x4c - +#define A_PCICFG_PCIX_CMD 0x60 #define A_PCICFG_INTR_ENABLE 0xf4 -#define A_PCICFG_INTR_CAUSE 0xf8 +#define S_MASTER_PARITY_ERR 0 +#define V_MASTER_PARITY_ERR(x) ((x) << S_MASTER_PARITY_ERR) +#define F_MASTER_PARITY_ERR V_MASTER_PARITY_ERR(1U) + +#define S_SIG_TARGET_ABORT 1 +#define V_SIG_TARGET_ABORT(x) ((x) << S_SIG_TARGET_ABORT) +#define F_SIG_TARGET_ABORT V_SIG_TARGET_ABORT(1U) + +#define S_RCV_TARGET_ABORT 2 +#define V_RCV_TARGET_ABORT(x) ((x) << S_RCV_TARGET_ABORT) +#define F_RCV_TARGET_ABORT V_RCV_TARGET_ABORT(1U) + +#define S_RCV_MASTER_ABORT 3 +#define V_RCV_MASTER_ABORT(x) ((x) << S_RCV_MASTER_ABORT) +#define F_RCV_MASTER_ABORT V_RCV_MASTER_ABORT(1U) + +#define S_SIG_SYS_ERR 4 +#define V_SIG_SYS_ERR(x) ((x) << S_SIG_SYS_ERR) +#define F_SIG_SYS_ERR V_SIG_SYS_ERR(1U) + +#define S_DET_PARITY_ERR 5 +#define V_DET_PARITY_ERR(x) ((x) << S_DET_PARITY_ERR) +#define F_DET_PARITY_ERR V_DET_PARITY_ERR(1U) + +#define S_PIO_PARITY_ERR 6 +#define V_PIO_PARITY_ERR(x) ((x) << S_PIO_PARITY_ERR) +#define F_PIO_PARITY_ERR V_PIO_PARITY_ERR(1U) + +#define S_WF_PARITY_ERR 7 +#define V_WF_PARITY_ERR(x) ((x) << S_WF_PARITY_ERR) +#define F_WF_PARITY_ERR V_WF_PARITY_ERR(1U) + +#define S_RF_PARITY_ERR 8 +#define M_RF_PARITY_ERR 0x3 +#define V_RF_PARITY_ERR(x) ((x) << S_RF_PARITY_ERR) +#define G_RF_PARITY_ERR(x) (((x) >> S_RF_PARITY_ERR) & M_RF_PARITY_ERR) + +#define S_CF_PARITY_ERR 10 +#define M_CF_PARITY_ERR 0x3 +#define V_CF_PARITY_ERR(x) ((x) << S_CF_PARITY_ERR) +#define G_CF_PARITY_ERR(x) (((x) >> S_CF_PARITY_ERR) & M_CF_PARITY_ERR) + +#define A_PCICFG_INTR_CAUSE 0xf8 #define A_PCICFG_MODE 0xfc #define S_PCI_MODE_64BIT 0 #define V_PCI_MODE_64BIT(x) ((x) << S_PCI_MODE_64BIT) #define F_PCI_MODE_64BIT V_PCI_MODE_64BIT(1U) +#define S_PCI_MODE_66MHZ 1 +#define V_PCI_MODE_66MHZ(x) ((x) << S_PCI_MODE_66MHZ) +#define F_PCI_MODE_66MHZ V_PCI_MODE_66MHZ(1U) + +#define S_PCI_MODE_PCIX_INITPAT 2 +#define M_PCI_MODE_PCIX_INITPAT 0x7 +#define V_PCI_MODE_PCIX_INITPAT(x) ((x) << S_PCI_MODE_PCIX_INITPAT) +#define G_PCI_MODE_PCIX_INITPAT(x) (((x) >> S_PCI_MODE_PCIX_INITPAT) & M_PCI_MODE_PCIX_INITPAT) + #define S_PCI_MODE_PCIX 5 #define V_PCI_MODE_PCIX(x) ((x) << S_PCI_MODE_PCIX) #define F_PCI_MODE_PCIX V_PCI_MODE_PCIX(1U) #define S_PCI_MODE_CLK 6 #define M_PCI_MODE_CLK 0x3 +#define V_PCI_MODE_CLK(x) ((x) << S_PCI_MODE_CLK) #define G_PCI_MODE_CLK(x) (((x) >> S_PCI_MODE_CLK) & M_PCI_MODE_CLK) #endif /* _CXGB_REGS_H_ */ diff --git a/drivers/net/chelsio/sge.c b/drivers/net/chelsio/sge.c index 9799c12380f..0ca8d876e16 100644 --- a/drivers/net/chelsio/sge.c +++ b/drivers/net/chelsio/sge.c @@ -42,12 +42,14 @@ #include <linux/types.h> #include <linux/errno.h> #include <linux/pci.h> +#include <linux/ktime.h> #include <linux/netdevice.h> #include <linux/etherdevice.h> #include <linux/if_vlan.h> #include <linux/skbuff.h> #include <linux/init.h> #include <linux/mm.h> +#include <linux/tcp.h> #include <linux/ip.h> #include <linux/in.h> #include <linux/if_arp.h> @@ -57,10 +59,8 @@ #include "regs.h" #include "espi.h" - -#ifdef NETIF_F_TSO -#include <linux/tcp.h> -#endif +/* This belongs in if_ether.h */ +#define ETH_P_CPL5 0xf #define SGE_CMDQ_N 2 #define SGE_FREELQ_N 2 @@ -73,6 +73,7 @@ #define SGE_INTRTIMER_NRES 1000 #define SGE_RX_COPY_THRES 256 #define SGE_RX_SM_BUF_SIZE 1536 +#define SGE_TX_DESC_MAX_PLEN 16384 # define SGE_RX_DROP_THRES 2 @@ -184,17 +185,17 @@ struct cmdQ { unsigned long status; /* HW DMA fetch status */ unsigned int in_use; /* # of in-use command descriptors */ unsigned int size; /* # of descriptors */ - unsigned int processed; /* total # of descs HW has processed */ - unsigned int cleaned; /* total # of descs SW has reclaimed */ - unsigned int stop_thres; /* SW TX queue suspend threshold */ + unsigned int processed; /* total # of descs HW has processed */ + unsigned int cleaned; /* total # of descs SW has reclaimed */ + unsigned int stop_thres; /* SW TX queue suspend threshold */ u16 pidx; /* producer index (SW) */ u16 cidx; /* consumer index (HW) */ u8 genbit; /* current generation (=valid) bit */ - u8 sop; /* is next entry start of packet? */ + u8 sop; /* is next entry start of packet? */ struct cmdQ_e *entries; /* HW command descriptor Q */ struct cmdQ_ce *centries; /* SW command context descriptor Q */ - spinlock_t lock; /* Lock to protect cmdQ enqueuing */ dma_addr_t dma_addr; /* DMA addr HW command descriptor Q */ + spinlock_t lock; /* Lock to protect cmdQ enqueuing */ }; struct freelQ { @@ -203,8 +204,8 @@ struct freelQ { u16 pidx; /* producer index (SW) */ u16 cidx; /* consumer index (HW) */ u16 rx_buffer_size; /* Buffer size on this free list */ - u16 dma_offset; /* DMA offset to align IP headers */ - u16 recycleq_idx; /* skb recycle q to use */ + u16 dma_offset; /* DMA offset to align IP headers */ + u16 recycleq_idx; /* skb recycle q to use */ u8 genbit; /* current generation (=valid) bit */ struct freelQ_e *entries; /* HW freelist descriptor Q */ struct freelQ_ce *centries; /* SW freelist context descriptor Q */ @@ -226,6 +227,29 @@ enum { CMDQ_STAT_LAST_PKT_DB = 2 /* last packet rung the doorbell */ }; +/* T204 TX SW scheduler */ + +/* Per T204 TX port */ +struct sched_port { + unsigned int avail; /* available bits - quota */ + unsigned int drain_bits_per_1024ns; /* drain rate */ + unsigned int speed; /* drain rate, mbps */ + unsigned int mtu; /* mtu size */ + struct sk_buff_head skbq; /* pending skbs */ +}; + +/* Per T204 device */ +struct sched { + ktime_t last_updated; /* last time quotas were computed */ + unsigned int max_avail; /* max bits to be sent to any port */ + unsigned int port; /* port index (round robin ports) */ + unsigned int num; /* num skbs in per port queues */ + struct sched_port p[MAX_NPORTS]; + struct tasklet_struct sched_tsk;/* tasklet used to run scheduler */ +}; +static void restart_sched(unsigned long); + + /* * Main SGE data structure * @@ -243,18 +267,240 @@ struct sge { unsigned int rx_pkt_pad; /* RX padding for L2 packets */ unsigned int jumbo_fl; /* jumbo freelist Q index */ unsigned int intrtimer_nres; /* no-resource interrupt timer */ - unsigned int fixed_intrtimer;/* non-adaptive interrupt timer */ + unsigned int fixed_intrtimer;/* non-adaptive interrupt timer */ struct timer_list tx_reclaim_timer; /* reclaims TX buffers */ struct timer_list espibug_timer; - unsigned int espibug_timeout; - struct sk_buff *espibug_skb; + unsigned long espibug_timeout; + struct sk_buff *espibug_skb[MAX_NPORTS]; u32 sge_control; /* shadow value of sge control reg */ struct sge_intr_counts stats; - struct sge_port_stats port_stats[MAX_NPORTS]; + struct sge_port_stats *port_stats[MAX_NPORTS]; + struct sched *tx_sched; struct cmdQ cmdQ[SGE_CMDQ_N] ____cacheline_aligned_in_smp; }; /* + * stop tasklet and free all pending skb's + */ +static void tx_sched_stop(struct sge *sge) +{ + struct sched *s = sge->tx_sched; + int i; + + tasklet_kill(&s->sched_tsk); + + for (i = 0; i < MAX_NPORTS; i++) + __skb_queue_purge(&s->p[s->port].skbq); +} + +/* + * t1_sched_update_parms() is called when the MTU or link speed changes. It + * re-computes scheduler parameters to scope with the change. + */ +unsigned int t1_sched_update_parms(struct sge *sge, unsigned int port, + unsigned int mtu, unsigned int speed) +{ + struct sched *s = sge->tx_sched; + struct sched_port *p = &s->p[port]; + unsigned int max_avail_segs; + + pr_debug("t1_sched_update_params mtu=%d speed=%d\n", mtu, speed); + if (speed) + p->speed = speed; + if (mtu) + p->mtu = mtu; + + if (speed || mtu) { + unsigned long long drain = 1024ULL * p->speed * (p->mtu - 40); + do_div(drain, (p->mtu + 50) * 1000); + p->drain_bits_per_1024ns = (unsigned int) drain; + + if (p->speed < 1000) + p->drain_bits_per_1024ns = + 90 * p->drain_bits_per_1024ns / 100; + } + + if (board_info(sge->adapter)->board == CHBT_BOARD_CHT204) { + p->drain_bits_per_1024ns -= 16; + s->max_avail = max(4096U, p->mtu + 16 + 14 + 4); + max_avail_segs = max(1U, 4096 / (p->mtu - 40)); + } else { + s->max_avail = 16384; + max_avail_segs = max(1U, 9000 / (p->mtu - 40)); + } + + pr_debug("t1_sched_update_parms: mtu %u speed %u max_avail %u " + "max_avail_segs %u drain_bits_per_1024ns %u\n", p->mtu, + p->speed, s->max_avail, max_avail_segs, + p->drain_bits_per_1024ns); + + return max_avail_segs * (p->mtu - 40); +} + +/* + * t1_sched_max_avail_bytes() tells the scheduler the maximum amount of + * data that can be pushed per port. + */ +void t1_sched_set_max_avail_bytes(struct sge *sge, unsigned int val) +{ + struct sched *s = sge->tx_sched; + unsigned int i; + + s->max_avail = val; + for (i = 0; i < MAX_NPORTS; i++) + t1_sched_update_parms(sge, i, 0, 0); +} + +/* + * t1_sched_set_drain_bits_per_us() tells the scheduler at which rate a port + * is draining. + */ +void t1_sched_set_drain_bits_per_us(struct sge *sge, unsigned int port, + unsigned int val) +{ + struct sched *s = sge->tx_sched; + struct sched_port *p = &s->p[port]; + p->drain_bits_per_1024ns = val * 1024 / 1000; + t1_sched_update_parms(sge, port, 0, 0); +} + + +/* + * get_clock() implements a ns clock (see ktime_get) + */ +static inline ktime_t get_clock(void) +{ + struct timespec ts; + + ktime_get_ts(&ts); + return timespec_to_ktime(ts); +} + +/* + * tx_sched_init() allocates resources and does basic initialization. + */ +static int tx_sched_init(struct sge *sge) +{ + struct sched *s; + int i; + + s = kzalloc(sizeof (struct sched), GFP_KERNEL); + if (!s) + return -ENOMEM; + + pr_debug("tx_sched_init\n"); + tasklet_init(&s->sched_tsk, restart_sched, (unsigned long) sge); + sge->tx_sched = s; + + for (i = 0; i < MAX_NPORTS; i++) { + skb_queue_head_init(&s->p[i].skbq); + t1_sched_update_parms(sge, i, 1500, 1000); + } + + return 0; +} + +/* + * sched_update_avail() computes the delta since the last time it was called + * and updates the per port quota (number of bits that can be sent to the any + * port). + */ +static inline int sched_update_avail(struct sge *sge) +{ + struct sched *s = sge->tx_sched; + ktime_t now = get_clock(); + unsigned int i; + long long delta_time_ns; + + delta_time_ns = ktime_to_ns(ktime_sub(now, s->last_updated)); + + pr_debug("sched_update_avail delta=%lld\n", delta_time_ns); + if (delta_time_ns < 15000) + return 0; + + for (i = 0; i < MAX_NPORTS; i++) { + struct sched_port *p = &s->p[i]; + unsigned int delta_avail; + + delta_avail = (p->drain_bits_per_1024ns * delta_time_ns) >> 13; + p->avail = min(p->avail + delta_avail, s->max_avail); + } + + s->last_updated = now; + + return 1; +} + +/* + * sched_skb() is called from two different places. In the tx path, any + * packet generating load on an output port will call sched_skb() + * (skb != NULL). In addition, sched_skb() is called from the irq/soft irq + * context (skb == NULL). + * The scheduler only returns a skb (which will then be sent) if the + * length of the skb is <= the current quota of the output port. + */ +static struct sk_buff *sched_skb(struct sge *sge, struct sk_buff *skb, + unsigned int credits) +{ + struct sched *s = sge->tx_sched; + struct sk_buff_head *skbq; + unsigned int i, len, update = 1; + + pr_debug("sched_skb %p\n", skb); + if (!skb) { + if (!s->num) + return NULL; + } else { + skbq = &s->p[skb->dev->if_port].skbq; + __skb_queue_tail(skbq, skb); + s->num++; + skb = NULL; + } + + if (credits < MAX_SKB_FRAGS + 1) + goto out; + + again: + for (i = 0; i < MAX_NPORTS; i++) { + s->port = ++s->port & (MAX_NPORTS - 1); + skbq = &s->p[s->port].skbq; + + skb = skb_peek(skbq); + + if (!skb) + continue; + + len = skb->len; + if (len <= s->p[s->port].avail) { + s->p[s->port].avail -= len; + s->num--; + __skb_unlink(skb, skbq); + goto out; + } + skb = NULL; + } + + if (update-- && sched_update_avail(sge)) + goto again; + + out: + /* If there are more pending skbs, we use the hardware to schedule us + * again. + */ + if (s->num && !skb) { + struct cmdQ *q = &sge->cmdQ[0]; + clear_bit(CMDQ_STAT_LAST_PKT_DB, &q->status); + if (test_and_set_bit(CMDQ_STAT_RUNNING, &q->status) == 0) { + set_bit(CMDQ_STAT_LAST_PKT_DB, &q->status); + writel(F_CMDQ0_ENABLE, sge->adapter->regs + A_SG_DOORBELL); + } + } + pr_debug("sched_skb ret %p\n", skb); + + return skb; +} + +/* * PIO to indicate that memory mapped Q contains valid descriptor(s). */ static inline void doorbell_pio(struct adapter *adapter, u32 val) @@ -335,10 +581,9 @@ static int alloc_rx_resources(struct sge *sge, struct sge_params *p) goto err_no_mem; memset(q->entries, 0, size); size = sizeof(struct freelQ_ce) * q->size; - q->centries = kmalloc(size, GFP_KERNEL); + q->centries = kzalloc(size, GFP_KERNEL); if (!q->centries) goto err_no_mem; - memset(q->centries, 0, size); } /* @@ -351,8 +596,11 @@ static int alloc_rx_resources(struct sge *sge, struct sge_params *p) sge->freelQ[!sge->jumbo_fl].rx_buffer_size = SGE_RX_SM_BUF_SIZE + sizeof(struct cpl_rx_data) + sge->freelQ[!sge->jumbo_fl].dma_offset; - sge->freelQ[sge->jumbo_fl].rx_buffer_size = (16 * 1024) - - SKB_DATA_ALIGN(sizeof(struct skb_shared_info)); + + size = (16 * 1024) - + SKB_DATA_ALIGN(sizeof(struct skb_shared_info)); + + sge->freelQ[sge->jumbo_fl].rx_buffer_size = size; /* * Setup which skb recycle Q should be used when recycling buffers from @@ -389,17 +637,23 @@ static void free_cmdQ_buffers(struct sge *sge, struct cmdQ *q, unsigned int n) q->in_use -= n; ce = &q->centries[cidx]; while (n--) { - if (q->sop) - pci_unmap_single(pdev, pci_unmap_addr(ce, dma_addr), - pci_unmap_len(ce, dma_len), - PCI_DMA_TODEVICE); - else - pci_unmap_page(pdev, pci_unmap_addr(ce, dma_addr), - pci_unmap_len(ce, dma_len), - PCI_DMA_TODEVICE); - q->sop = 0; + if (q->sop) { + if (likely(pci_unmap_len(ce, dma_len))) { + pci_unmap_single(pdev, + pci_unmap_addr(ce, dma_addr), + pci_unmap_len(ce, dma_len), + PCI_DMA_TODEVICE); + q->sop = 0; + } + } else { + if (likely(pci_unmap_len(ce, dma_len))) { + pci_unmap_page(pdev, pci_unmap_addr(ce, dma_addr), + pci_unmap_len(ce, dma_len), + PCI_DMA_TODEVICE); + } + } if (ce->skb) { - dev_kfree_skb(ce->skb); + dev_kfree_skb_any(ce->skb); q->sop = 1; } ce++; @@ -463,10 +717,9 @@ static int alloc_tx_resources(struct sge *sge, struct sge_params *p) goto err_no_mem; memset(q->entries, 0, size); size = sizeof(struct cmdQ_ce) * q->size; - q->centries = kmalloc(size, GFP_KERNEL); + q->centries = kzalloc(size, GFP_KERNEL); if (!q->centries) goto err_no_mem; - memset(q->centries, 0, size); } /* @@ -506,7 +759,7 @@ void t1_set_vlan_accel(struct adapter *adapter, int on_off) sge->sge_control |= F_VLAN_XTRACT; if (adapter->open_device_map) { writel(sge->sge_control, adapter->regs + A_SG_CONTROL); - readl(adapter->regs + A_SG_CONTROL); /* flush */ + readl(adapter->regs + A_SG_CONTROL); /* flush */ } } @@ -540,7 +793,6 @@ static void configure_sge(struct sge *sge, struct sge_params *p) sge->sge_control = F_CMDQ0_ENABLE | F_CMDQ1_ENABLE | F_FL0_ENABLE | F_FL1_ENABLE | F_CPL_ENABLE | F_RESPONSE_QUEUE_ENABLE | V_CMDQ_PRIORITY(2) | F_DISABLE_CMDQ1_GTS | F_ISCSI_COALESCE | - F_DISABLE_FL0_GTS | F_DISABLE_FL1_GTS | V_RX_PKT_OFFSET(sge->rx_pkt_pad); #if defined(__BIG_ENDIAN_BITFIELD) @@ -568,9 +820,12 @@ static inline unsigned int jumbo_payload_capacity(const struct sge *sge) */ void t1_sge_destroy(struct sge *sge) { - if (sge->espibug_skb) - kfree_skb(sge->espibug_skb); + int i; + for_each_port(sge->adapter, i) + free_percpu(sge->port_stats[i]); + + kfree(sge->tx_sched); free_tx_resources(sge); free_rx_resources(sge); kfree(sge); @@ -735,14 +990,28 @@ int t1_sge_intr_error_handler(struct sge *sge) return 0; } -const struct sge_intr_counts *t1_sge_get_intr_counts(struct sge *sge) +const struct sge_intr_counts *t1_sge_get_intr_counts(const struct sge *sge) { return &sge->stats; } -const struct sge_port_stats *t1_sge_get_port_stats(struct sge *sge, int port) +void t1_sge_get_port_stats(const struct sge *sge, int port, + struct sge_port_stats *ss) { - return &sge->port_stats[port]; + int cpu; + + memset(ss, 0, sizeof(*ss)); + for_each_possible_cpu(cpu) { + struct sge_port_stats *st = per_cpu_ptr(sge->port_stats[port], cpu); + + ss->rx_packets += st->rx_packets; + ss->rx_cso_good += st->rx_cso_good; + ss->tx_packets += st->tx_packets; + ss->tx_cso += st->tx_cso; + ss->tx_tso += st->tx_tso; + ss->vlan_xtract += st->vlan_xtract; + ss->vlan_insert += st->vlan_insert; + } } /** @@ -856,6 +1125,99 @@ static void unexpected_offload(struct adapter *adapter, struct freelQ *fl) } /* + * T1/T2 SGE limits the maximum DMA size per TX descriptor to + * SGE_TX_DESC_MAX_PLEN (16KB). If the PAGE_SIZE is larger than 16KB, the + * stack might send more than SGE_TX_DESC_MAX_PLEN in a contiguous manner. + * Note that the *_large_page_tx_descs stuff will be optimized out when + * PAGE_SIZE <= SGE_TX_DESC_MAX_PLEN. + * + * compute_large_page_descs() computes how many additional descriptors are + * required to break down the stack's request. + */ +static inline unsigned int compute_large_page_tx_descs(struct sk_buff *skb) +{ + unsigned int count = 0; + if (PAGE_SIZE > SGE_TX_DESC_MAX_PLEN) { + unsigned int nfrags = skb_shinfo(skb)->nr_frags; + unsigned int i, len = skb->len - skb->data_len; + while (len > SGE_TX_DESC_MAX_PLEN) { + count++; + len -= SGE_TX_DESC_MAX_PLEN; + } + for (i = 0; nfrags--; i++) { + skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; + len = frag->size; + while (len > SGE_TX_DESC_MAX_PLEN) { + count++; + len -= SGE_TX_DESC_MAX_PLEN; + } + } + } + return count; +} + +/* + * Write a cmdQ entry. + * + * Since this function writes the 'flags' field, it must not be used to + * write the first cmdQ entry. + */ +static inline void write_tx_desc(struct cmdQ_e *e, dma_addr_t mapping, + unsigned int len, unsigned int gen, + unsigned int eop) +{ + if (unlikely(len > SGE_TX_DESC_MAX_PLEN)) + BUG(); + e->addr_lo = (u32)mapping; + e->addr_hi = (u64)mapping >> 32; + e->len_gen = V_CMD_LEN(len) | V_CMD_GEN1(gen); + e->flags = F_CMD_DATAVALID | V_CMD_EOP(eop) | V_CMD_GEN2(gen); +} + +/* + * See comment for previous function. + * + * write_tx_descs_large_page() writes additional SGE tx descriptors if + * *desc_len exceeds HW's capability. + */ +static inline unsigned int write_large_page_tx_descs(unsigned int pidx, + struct cmdQ_e **e, + struct cmdQ_ce **ce, + unsigned int *gen, + dma_addr_t *desc_mapping, + unsigned int *desc_len, + unsigned int nfrags, + struct cmdQ *q) +{ + if (PAGE_SIZE > SGE_TX_DESC_MAX_PLEN) { + struct cmdQ_e *e1 = *e; + struct cmdQ_ce *ce1 = *ce; + + while (*desc_len > SGE_TX_DESC_MAX_PLEN) { + *desc_len -= SGE_TX_DESC_MAX_PLEN; + write_tx_desc(e1, *desc_mapping, SGE_TX_DESC_MAX_PLEN, + *gen, nfrags == 0 && *desc_len == 0); + ce1->skb = NULL; + pci_unmap_len_set(ce1, dma_len, 0); + *desc_mapping += SGE_TX_DESC_MAX_PLEN; + if (*desc_len) { + ce1++; + e1++; + if (++pidx == q->size) { + pidx = 0; + *gen ^= 1; + ce1 = q->centries; + e1 = q->entries; + } + } + } + *e = e1; + *ce = ce1; + } + return pidx; +} + +/* * Write the command descriptors to transmit the given skb starting at * descriptor pidx with the given generation. */ @@ -863,50 +1225,84 @@ static inline void write_tx_descs(struct adapter *adapter, struct sk_buff *skb, unsigned int pidx, unsigned int gen, struct cmdQ *q) { - dma_addr_t mapping; + dma_addr_t mapping, desc_mapping; struct cmdQ_e *e, *e1; struct cmdQ_ce *ce; - unsigned int i, flags, nfrags = skb_shinfo(skb)->nr_frags; + unsigned int i, flags, first_desc_len, desc_len, + nfrags = skb_shinfo(skb)->nr_frags; - mapping = pci_map_single(adapter->pdev, skb->data, - skb->len - skb->data_len, PCI_DMA_TODEVICE); + e = e1 = &q->entries[pidx]; ce = &q->centries[pidx]; + + mapping = pci_map_single(adapter->pdev, skb->data, + skb->len - skb->data_len, PCI_DMA_TODEVICE); + + desc_mapping = mapping; + desc_len = skb->len - skb->data_len; + + flags = F_CMD_DATAVALID | F_CMD_SOP | + V_CMD_EOP(nfrags == 0 && desc_len <= SGE_TX_DESC_MAX_PLEN) | + V_CMD_GEN2(gen); + first_desc_len = (desc_len <= SGE_TX_DESC_MAX_PLEN) ? + desc_len : SGE_TX_DESC_MAX_PLEN; + e->addr_lo = (u32)desc_mapping; + e->addr_hi = (u64)desc_mapping >> 32; + e->len_gen = V_CMD_LEN(first_desc_len) | V_CMD_GEN1(gen); + ce->skb = NULL; + pci_unmap_len_set(ce, dma_len, 0); + + if (PAGE_SIZE > SGE_TX_DESC_MAX_PLEN && + desc_len > SGE_TX_DESC_MAX_PLEN) { + desc_mapping += first_desc_len; + desc_len -= first_desc_len; + e1++; + ce++; + if (++pidx == q->size) { + pidx = 0; + gen ^= 1; + e1 = q->entries; + ce = q->centries; + } + pidx = write_large_page_tx_descs(pidx, &e1, &ce, &gen, + &desc_mapping, &desc_len, + nfrags, q); + + if (likely(desc_len)) + write_tx_desc(e1, desc_mapping, desc_len, gen, + nfrags == 0); + } + ce->skb = NULL; pci_unmap_addr_set(ce, dma_addr, mapping); pci_unmap_len_set(ce, dma_len, skb->len - skb->data_len); - flags = F_CMD_DATAVALID | F_CMD_SOP | V_CMD_EOP(nfrags == 0) | - V_CMD_GEN2(gen); - e = &q->entries[pidx]; - e->addr_lo = (u32)mapping; - e->addr_hi = (u64)mapping >> 32; - e->len_gen = V_CMD_LEN(skb->len - skb->data_len) | V_CMD_GEN1(gen); - for (e1 = e, i = 0; nfrags--; i++) { + for (i = 0; nfrags--; i++) { skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; - - ce++; e1++; + ce++; if (++pidx == q->size) { pidx = 0; gen ^= 1; - ce = q->centries; e1 = q->entries; + ce = q->centries; } mapping = pci_map_page(adapter->pdev, frag->page, frag->page_offset, frag->size, PCI_DMA_TODEVICE); + desc_mapping = mapping; + desc_len = frag->size; + + pidx = write_large_page_tx_descs(pidx, &e1, &ce, &gen, + &desc_mapping, &desc_len, + nfrags, q); + if (likely(desc_len)) + write_tx_desc(e1, desc_mapping, desc_len, gen, + nfrags == 0); ce->skb = NULL; pci_unmap_addr_set(ce, dma_addr, mapping); pci_unmap_len_set(ce, dma_len, frag->size); - - e1->addr_lo = (u32)mapping; - e1->addr_hi = (u64)mapping >> 32; - e1->len_gen = V_CMD_LEN(frag->size) | V_CMD_GEN1(gen); - e1->flags = F_CMD_DATAVALID | V_CMD_EOP(nfrags == 0) | - V_CMD_GEN2(gen); } - ce->skb = skb; wmb(); e->flags = flags; @@ -920,26 +1316,56 @@ static inline void reclaim_completed_tx(struct sge *sge, struct cmdQ *q) unsigned int reclaim = q->processed - q->cleaned; if (reclaim) { + pr_debug("reclaim_completed_tx processed:%d cleaned:%d\n", + q->processed, q->cleaned); free_cmdQ_buffers(sge, q, reclaim); q->cleaned += reclaim; } } -#ifndef SET_ETHTOOL_OPS -# define __netif_rx_complete(dev) netif_rx_complete(dev) -#endif - /* - * We cannot use the standard netif_rx_schedule_prep() because we have multiple - * ports plus the TOE all multiplexing onto a single response queue, therefore - * accepting new responses cannot depend on the state of any particular port. - * So define our own equivalent that omits the netif_running() test. + * Called from tasklet. Checks the scheduler for any + * pending skbs that can be sent. */ -static inline int napi_schedule_prep(struct net_device *dev) +static void restart_sched(unsigned long arg) { - return !test_and_set_bit(__LINK_STATE_RX_SCHED, &dev->state); -} + struct sge *sge = (struct sge *) arg; + struct adapter *adapter = sge->adapter; + struct cmdQ *q = &sge->cmdQ[0]; + struct sk_buff *skb; + unsigned int credits, queued_skb = 0; + spin_lock(&q->lock); + reclaim_completed_tx(sge, q); + + credits = q->size - q->in_use; + pr_debug("restart_sched credits=%d\n", credits); + while ((skb = sched_skb(sge, NULL, credits)) != NULL) { + unsigned int genbit, pidx, count; + count = 1 + skb_shinfo(skb)->nr_frags; + count += compute_large_page_tx_descs(skb); + q->in_use += count; + genbit = q->genbit; + pidx = q->pidx; + q->pidx += count; + if (q->pidx >= q->size) { + q->pidx -= q->size; + q->genbit ^= 1; + } + write_tx_descs(adapter, skb, pidx, genbit, q); + credits = q->size - q->in_use; + queued_skb = 1; + } + + if (queued_skb) { + clear_bit(CMDQ_STAT_LAST_PKT_DB, &q->status); + if (test_and_set_bit(CMDQ_STAT_RUNNING, &q->status) == 0) { + set_bit(CMDQ_STAT_LAST_PKT_DB, &q->status); + writel(F_CMDQ0_ENABLE, adapter->regs + A_SG_DOORBELL); + } + } + spin_unlock(&q->lock); +} /** * sge_rx - process an ingress ethernet packet @@ -954,31 +1380,39 @@ static int sge_rx(struct sge *sge, struct freelQ *fl, unsigned int len) struct sk_buff *skb; struct cpl_rx_pkt *p; struct adapter *adapter = sge->adapter; + struct sge_port_stats *st; - sge->stats.ethernet_pkts++; skb = get_packet(adapter->pdev, fl, len - sge->rx_pkt_pad, sge->rx_pkt_pad, 2, SGE_RX_COPY_THRES, SGE_RX_DROP_THRES); - if (!skb) { - sge->port_stats[0].rx_drops++; /* charge only port 0 for now */ + if (unlikely(!skb)) { + sge->stats.rx_drops++; return 0; } p = (struct cpl_rx_pkt *)skb->data; skb_pull(skb, sizeof(*p)); + if (p->iff >= adapter->params.nports) { + kfree_skb(skb); + return 0; + } + skb->dev = adapter->port[p->iff].dev; skb->dev->last_rx = jiffies; + st = per_cpu_ptr(sge->port_stats[p->iff], smp_processor_id()); + st->rx_packets++; + skb->protocol = eth_type_trans(skb, skb->dev); if ((adapter->flags & RX_CSUM_ENABLED) && p->csum == 0xffff && skb->protocol == htons(ETH_P_IP) && (skb->data[9] == IPPROTO_TCP || skb->data[9] == IPPROTO_UDP)) { - sge->port_stats[p->iff].rx_cso_good++; + ++st->rx_cso_good; skb->ip_summed = CHECKSUM_UNNECESSARY; } else skb->ip_summed = CHECKSUM_NONE; if (unlikely(adapter->vlan_grp && p->vlan_valid)) { - sge->port_stats[p->iff].vlan_xtract++; + st->vlan_xtract++; if (adapter->params.sge.polling) vlan_hwaccel_receive_skb(skb, adapter->vlan_grp, ntohs(p->vlan)); @@ -1039,18 +1473,24 @@ static unsigned int update_tx_info(struct adapter *adapter, struct cmdQ *cmdq = &sge->cmdQ[0]; cmdq->processed += pr0; - + if (flags & (F_FL0_ENABLE | F_FL1_ENABLE)) { + freelQs_empty(sge); + flags &= ~(F_FL0_ENABLE | F_FL1_ENABLE); + } if (flags & F_CMDQ0_ENABLE) { clear_bit(CMDQ_STAT_RUNNING, &cmdq->status); - + if (cmdq->cleaned + cmdq->in_use != cmdq->processed && !test_and_set_bit(CMDQ_STAT_LAST_PKT_DB, &cmdq->status)) { set_bit(CMDQ_STAT_RUNNING, &cmdq->status); writel(F_CMDQ0_ENABLE, adapter->regs + A_SG_DOORBELL); } - flags &= ~F_CMDQ0_ENABLE; + if (sge->tx_sched) + tasklet_hi_schedule(&sge->tx_sched->sched_tsk); + + flags &= ~F_CMDQ0_ENABLE; } - + if (unlikely(sge->stopped_tx_queues != 0)) restart_tx_queues(sge); @@ -1241,20 +1681,21 @@ static irqreturn_t t1_interrupt_napi(int irq, void *data) if (e->GenerationBit == q->genbit) { if (e->DataValid || process_pure_responses(adapter, e)) { - if (likely(napi_schedule_prep(sge->netdev))) + if (likely(__netif_rx_schedule_prep(sge->netdev))) __netif_rx_schedule(sge->netdev); - else - printk(KERN_CRIT + else if (net_ratelimit()) + printk(KERN_INFO "NAPI schedule failure!\n"); } else - writel(q->cidx, adapter->regs + A_SG_SLEEPING); + writel(q->cidx, adapter->regs + A_SG_SLEEPING); + handled = 1; goto unlock; } else - writel(q->cidx, adapter->regs + A_SG_SLEEPING); - } else - if (readl(adapter->regs + A_PL_CAUSE) & F_PL_INTR_SGE_DATA) - printk(KERN_ERR "data interrupt while NAPI running\n"); + writel(q->cidx, adapter->regs + A_SG_SLEEPING); + } else if (readl(adapter->regs + A_PL_CAUSE) & F_PL_INTR_SGE_DATA) { + printk(KERN_ERR "data interrupt while NAPI running\n"); + } handled = t1_slow_intr_handler(adapter); if (!handled) @@ -1335,34 +1776,59 @@ static int t1_sge_tx(struct sk_buff *skb, struct adapter *adapter, { struct sge *sge = adapter->sge; struct cmdQ *q = &sge->cmdQ[qid]; - unsigned int credits, pidx, genbit, count; + unsigned int credits, pidx, genbit, count, use_sched_skb = 0; + + if (!spin_trylock(&q->lock)) + return NETDEV_TX_LOCKED; - spin_lock(&q->lock); reclaim_completed_tx(sge, q); pidx = q->pidx; credits = q->size - q->in_use; count = 1 + skb_shinfo(skb)->nr_frags; + count += compute_large_page_tx_descs(skb); - { /* Ethernet packet */ - if (unlikely(credits < count)) { + /* Ethernet packet */ + if (unlikely(credits < count)) { + if (!netif_queue_stopped(dev)) { netif_stop_queue(dev); set_bit(dev->if_port, &sge->stopped_tx_queues); sge->stats.cmdQ_full[2]++; - spin_unlock(&q->lock); - if (!netif_queue_stopped(dev)) - CH_ERR("%s: Tx ring full while queue awake!\n", - adapter->name); - return NETDEV_TX_BUSY; + CH_ERR("%s: Tx ring full while queue awake!\n", + adapter->name); } - if (unlikely(credits - count < q->stop_thres)) { - sge->stats.cmdQ_full[2]++; - netif_stop_queue(dev); - set_bit(dev->if_port, &sge->stopped_tx_queues); + spin_unlock(&q->lock); + return NETDEV_TX_BUSY; + } + + if (unlikely(credits - count < q->stop_thres)) { + netif_stop_queue(dev); + set_bit(dev->if_port, &sge->stopped_tx_queues); + sge->stats.cmdQ_full[2]++; + } + + /* T204 cmdQ0 skbs that are destined for a certain port have to go + * through the scheduler. + */ + if (sge->tx_sched && !qid && skb->dev) { + use_sched: + use_sched_skb = 1; + /* Note that the scheduler might return a different skb than + * the one passed in. + */ + skb = sched_skb(sge, skb, credits); + if (!skb) { + spin_unlock(&q->lock); + return NETDEV_TX_OK; } + pidx = q->pidx; + count = 1 + skb_shinfo(skb)->nr_frags; + count += compute_large_page_tx_descs(skb); } + q->in_use += count; genbit = q->genbit; + pidx = q->pidx; q->pidx += count; if (q->pidx >= q->size) { q->pidx -= q->size; @@ -1388,6 +1854,14 @@ static int t1_sge_tx(struct sk_buff *skb, struct adapter *adapter, writel(F_CMDQ0_ENABLE, adapter->regs + A_SG_DOORBELL); } } + + if (use_sched_skb) { + if (spin_trylock(&q->lock)) { + credits = q->size - q->in_use; + skb = NULL; + goto use_sched; + } + } return NETDEV_TX_OK; } @@ -1412,16 +1886,20 @@ static inline int eth_hdr_len(const void *data) int t1_start_xmit(struct sk_buff *skb, struct net_device *dev) { struct adapter *adapter = dev->priv; - struct sge_port_stats *st = &adapter->sge->port_stats[dev->if_port]; struct sge *sge = adapter->sge; + struct sge_port_stats *st = per_cpu_ptr(sge->port_stats[dev->if_port], smp_processor_id()); struct cpl_tx_pkt *cpl; + struct sk_buff *orig_skb = skb; + int ret; + + if (skb->protocol == htons(ETH_P_CPL5)) + goto send; -#ifdef NETIF_F_TSO - if (skb_is_gso(skb)) { + if (skb_shinfo(skb)->gso_size) { int eth_type; struct cpl_tx_pkt_lso *hdr; - st->tso++; + ++st->tx_tso; eth_type = skb->nh.raw - skb->data == ETH_HLEN ? CPL_ETH_II : CPL_ETH_II_VLAN; @@ -1432,13 +1910,10 @@ int t1_start_xmit(struct sk_buff *skb, struct net_device *dev) hdr->ip_hdr_words = skb->nh.iph->ihl; hdr->tcp_hdr_words = skb->h.th->doff; hdr->eth_type_mss = htons(MK_ETH_TYPE_MSS(eth_type, - skb_shinfo(skb)->gso_size)); + skb_shinfo(skb)->gso_size)); hdr->len = htonl(skb->len - sizeof(*hdr)); cpl = (struct cpl_tx_pkt *)hdr; - sge->stats.tx_lso_pkts++; - } else -#endif - { + } else { /* * Packets shorter than ETH_HLEN can break the MAC, drop them * early. Also, we may get oversized packets because some @@ -1447,6 +1922,8 @@ int t1_start_xmit(struct sk_buff *skb, struct net_device *dev) */ if (unlikely(skb->len < ETH_HLEN || skb->len > dev->mtu + eth_hdr_len(skb->data))) { + pr_debug("%s: packet size %d hdr %d mtu%d\n", dev->name, + skb->len, eth_hdr_len(skb->data), dev->mtu); dev_kfree_skb_any(skb); return NETDEV_TX_OK; } @@ -1456,9 +1933,9 @@ int t1_start_xmit(struct sk_buff *skb, struct net_device *dev) * components, such as pktgen, do not handle it right. * Complain when this happens but try to fix things up. */ - if (unlikely(skb_headroom(skb) < - dev->hard_header_len - ETH_HLEN)) { - struct sk_buff *orig_skb = skb; + if (unlikely(skb_headroom(skb) < dev->hard_header_len - ETH_HLEN)) { + pr_debug("%s: headroom %d header_len %d\n", dev->name, + skb_headroom(skb), dev->hard_header_len); if (net_ratelimit()) printk(KERN_ERR "%s: inadequate headroom in " @@ -1471,19 +1948,21 @@ int t1_start_xmit(struct sk_buff *skb, struct net_device *dev) if (!(adapter->flags & UDP_CSUM_CAPABLE) && skb->ip_summed == CHECKSUM_PARTIAL && - skb->nh.iph->protocol == IPPROTO_UDP) + skb->nh.iph->protocol == IPPROTO_UDP) { if (unlikely(skb_checksum_help(skb))) { + pr_debug("%s: unable to do udp checksum\n", dev->name); dev_kfree_skb_any(skb); return NETDEV_TX_OK; } + } /* Hmmm, assuming to catch the gratious arp... and we'll use * it to flush out stuck espi packets... - */ - if (unlikely(!adapter->sge->espibug_skb)) { + */ + if ((unlikely(!adapter->sge->espibug_skb[dev->if_port]))) { if (skb->protocol == htons(ETH_P_ARP) && skb->nh.arph->ar_op == htons(ARPOP_REQUEST)) { - adapter->sge->espibug_skb = skb; + adapter->sge->espibug_skb[dev->if_port] = skb; /* We want to re-use this skb later. We * simply bump the reference count and it * will not be freed... @@ -1499,8 +1978,6 @@ int t1_start_xmit(struct sk_buff *skb, struct net_device *dev) /* the length field isn't used so don't bother setting it */ st->tx_cso += (skb->ip_summed == CHECKSUM_PARTIAL); - sge->stats.tx_do_cksum += (skb->ip_summed == CHECKSUM_PARTIAL); - sge->stats.tx_reg_pkts++; } cpl->iff = dev->if_port; @@ -1513,8 +1990,19 @@ int t1_start_xmit(struct sk_buff *skb, struct net_device *dev) #endif cpl->vlan_valid = 0; +send: + st->tx_packets++; dev->trans_start = jiffies; - return t1_sge_tx(skb, adapter, 0, dev); + ret = t1_sge_tx(skb, adapter, 0, dev); + + /* If transmit busy, and we reallocated skb's due to headroom limit, + * then silently discard to avoid leak. + */ + if (unlikely(ret != NETDEV_TX_OK && skb != orig_skb)) { + dev_kfree_skb_any(skb); + ret = NETDEV_TX_OK; + } + return ret; } /* @@ -1532,10 +2020,9 @@ static void sge_tx_reclaim_cb(unsigned long data) continue; reclaim_completed_tx(sge, q); - if (i == 0 && q->in_use) /* flush pending credits */ - writel(F_CMDQ0_ENABLE, - sge->adapter->regs + A_SG_DOORBELL); - + if (i == 0 && q->in_use) { /* flush pending credits */ + writel(F_CMDQ0_ENABLE, sge->adapter->regs + A_SG_DOORBELL); + } spin_unlock(&q->lock); } mod_timer(&sge->tx_reclaim_timer, jiffies + TX_RECLAIM_PERIOD); @@ -1582,11 +2069,20 @@ int t1_sge_configure(struct sge *sge, struct sge_params *p) */ void t1_sge_stop(struct sge *sge) { + int i; writel(0, sge->adapter->regs + A_SG_CONTROL); - (void) readl(sge->adapter->regs + A_SG_CONTROL); /* flush */ + readl(sge->adapter->regs + A_SG_CONTROL); /* flush */ + if (is_T2(sge->adapter)) del_timer_sync(&sge->espibug_timer); + del_timer_sync(&sge->tx_reclaim_timer); + if (sge->tx_sched) + tx_sched_stop(sge); + + for (i = 0; i < MAX_NPORTS; i++) + if (sge->espibug_skb[i]) + kfree_skb(sge->espibug_skb[i]); } /* @@ -1599,74 +2095,128 @@ void t1_sge_start(struct sge *sge) writel(sge->sge_control, sge->adapter->regs + A_SG_CONTROL); doorbell_pio(sge->adapter, F_FL0_ENABLE | F_FL1_ENABLE); - (void) readl(sge->adapter->regs + A_SG_CONTROL); /* flush */ + readl(sge->adapter->regs + A_SG_CONTROL); /* flush */ mod_timer(&sge->tx_reclaim_timer, jiffies + TX_RECLAIM_PERIOD); - if (is_T2(sge->adapter)) + if (is_T2(sge->adapter)) mod_timer(&sge->espibug_timer, jiffies + sge->espibug_timeout); } /* * Callback for the T2 ESPI 'stuck packet feature' workaorund */ -static void espibug_workaround(void *data) +static void espibug_workaround_t204(unsigned long data) { struct adapter *adapter = (struct adapter *)data; struct sge *sge = adapter->sge; + unsigned int nports = adapter->params.nports; + u32 seop[MAX_NPORTS]; - if (netif_running(adapter->port[0].dev)) { - struct sk_buff *skb = sge->espibug_skb; - - u32 seop = t1_espi_get_mon(adapter, 0x930, 0); - - if ((seop & 0xfff0fff) == 0xfff && skb) { - if (!skb->cb[0]) { - u8 ch_mac_addr[ETH_ALEN] = - {0x0, 0x7, 0x43, 0x0, 0x0, 0x0}; - memcpy(skb->data + sizeof(struct cpl_tx_pkt), - ch_mac_addr, ETH_ALEN); - memcpy(skb->data + skb->len - 10, ch_mac_addr, - ETH_ALEN); - skb->cb[0] = 0xff; + if (adapter->open_device_map & PORT_MASK) { + int i; + if (t1_espi_get_mon_t204(adapter, &(seop[0]), 0) < 0) { + return; + } + for (i = 0; i < nports; i++) { + struct sk_buff *skb = sge->espibug_skb[i]; + if ( (netif_running(adapter->port[i].dev)) && + !(netif_queue_stopped(adapter->port[i].dev)) && + (seop[i] && ((seop[i] & 0xfff) == 0)) && + skb ) { + if (!skb->cb[0]) { + u8 ch_mac_addr[ETH_ALEN] = + {0x0, 0x7, 0x43, 0x0, 0x0, 0x0}; + memcpy(skb->data + sizeof(struct cpl_tx_pkt), + ch_mac_addr, ETH_ALEN); + memcpy(skb->data + skb->len - 10, + ch_mac_addr, ETH_ALEN); + skb->cb[0] = 0xff; + } + + /* bump the reference count to avoid freeing of + * the skb once the DMA has completed. + */ + skb = skb_get(skb); + t1_sge_tx(skb, adapter, 0, adapter->port[i].dev); } - - /* bump the reference count to avoid freeing of the - * skb once the DMA has completed. - */ - skb = skb_get(skb); - t1_sge_tx(skb, adapter, 0, adapter->port[0].dev); } } mod_timer(&sge->espibug_timer, jiffies + sge->espibug_timeout); } +static void espibug_workaround(unsigned long data) +{ + struct adapter *adapter = (struct adapter *)data; + struct sge *sge = adapter->sge; + + if (netif_running(adapter->port[0].dev)) { + struct sk_buff *skb = sge->espibug_skb[0]; + u32 seop = t1_espi_get_mon(adapter, 0x930, 0); + + if ((seop & 0xfff0fff) == 0xfff && skb) { + if (!skb->cb[0]) { + u8 ch_mac_addr[ETH_ALEN] = + {0x0, 0x7, 0x43, 0x0, 0x0, 0x0}; + memcpy(skb->data + sizeof(struct cpl_tx_pkt), + ch_mac_addr, ETH_ALEN); + memcpy(skb->data + skb->len - 10, ch_mac_addr, + ETH_ALEN); + skb->cb[0] = 0xff; + } + + /* bump the reference count to avoid freeing of the + * skb once the DMA has completed. + */ + skb = skb_get(skb); + t1_sge_tx(skb, adapter, 0, adapter->port[0].dev); + } + } + mod_timer(&sge->espibug_timer, jiffies + sge->espibug_timeout); +} + /* * Creates a t1_sge structure and returns suggested resource parameters. */ struct sge * __devinit t1_sge_create(struct adapter *adapter, struct sge_params *p) { - struct sge *sge = kmalloc(sizeof(*sge), GFP_KERNEL); + struct sge *sge = kzalloc(sizeof(*sge), GFP_KERNEL); + int i; if (!sge) return NULL; - memset(sge, 0, sizeof(*sge)); sge->adapter = adapter; sge->netdev = adapter->port[0].dev; sge->rx_pkt_pad = t1_is_T1B(adapter) ? 0 : 2; sge->jumbo_fl = t1_is_T1B(adapter) ? 1 : 0; + for_each_port(adapter, i) { + sge->port_stats[i] = alloc_percpu(struct sge_port_stats); + if (!sge->port_stats[i]) + goto nomem_port; + } + init_timer(&sge->tx_reclaim_timer); sge->tx_reclaim_timer.data = (unsigned long)sge; sge->tx_reclaim_timer.function = sge_tx_reclaim_cb; if (is_T2(sge->adapter)) { init_timer(&sge->espibug_timer); - sge->espibug_timer.function = (void *)&espibug_workaround; + + if (adapter->params.nports > 1) { + tx_sched_init(sge); + sge->espibug_timer.function = espibug_workaround_t204; + } else { + sge->espibug_timer.function = espibug_workaround; + } sge->espibug_timer.data = (unsigned long)sge->adapter; + sge->espibug_timeout = 1; + /* for T204, every 10ms */ + if (adapter->params.nports > 1) + sge->espibug_timeout = HZ/100; } @@ -1674,10 +2224,25 @@ struct sge * __devinit t1_sge_create(struct adapter *adapter, p->cmdQ_size[1] = SGE_CMDQ1_E_N; p->freelQ_size[!sge->jumbo_fl] = SGE_FREEL_SIZE; p->freelQ_size[sge->jumbo_fl] = SGE_JUMBO_FREEL_SIZE; - p->rx_coalesce_usecs = 50; + if (sge->tx_sched) { + if (board_info(sge->adapter)->board == CHBT_BOARD_CHT204) + p->rx_coalesce_usecs = 15; + else + p->rx_coalesce_usecs = 50; + } else + p->rx_coalesce_usecs = 50; + p->coalesce_enable = 0; p->sample_interval_usecs = 0; p->polling = 0; return sge; +nomem_port: + while (i >= 0) { + free_percpu(sge->port_stats[i]); + --i; + } + kfree(sge); + return NULL; + } diff --git a/drivers/net/chelsio/sge.h b/drivers/net/chelsio/sge.h index 91af47bab7b..7ceb0117d03 100644 --- a/drivers/net/chelsio/sge.h +++ b/drivers/net/chelsio/sge.h @@ -44,6 +44,9 @@ #include <asm/byteorder.h> struct sge_intr_counts { + unsigned int rx_drops; /* # of packets dropped due to no mem */ + unsigned int pure_rsps; /* # of non-payload responses */ + unsigned int unhandled_irqs; /* # of unhandled interrupts */ unsigned int respQ_empty; /* # times respQ empty */ unsigned int respQ_overflow; /* # respQ overflow (fatal) */ unsigned int freelistQ_empty; /* # times freelist empty */ @@ -51,24 +54,16 @@ struct sge_intr_counts { unsigned int pkt_mismatch; unsigned int cmdQ_full[3]; /* not HW IRQ, host cmdQ[] full */ unsigned int cmdQ_restarted[3];/* # of times cmdQ X was restarted */ - unsigned int ethernet_pkts; /* # of Ethernet packets received */ - unsigned int offload_pkts; /* # of offload packets received */ - unsigned int offload_bundles; /* # of offload pkt bundles delivered */ - unsigned int pure_rsps; /* # of non-payload responses */ - unsigned int unhandled_irqs; /* # of unhandled interrupts */ - unsigned int tx_ipfrags; - unsigned int tx_reg_pkts; - unsigned int tx_lso_pkts; - unsigned int tx_do_cksum; }; struct sge_port_stats { - unsigned long rx_cso_good; /* # of successful RX csum offloads */ - unsigned long tx_cso; /* # of TX checksum offloads */ - unsigned long vlan_xtract; /* # of VLAN tag extractions */ - unsigned long vlan_insert; /* # of VLAN tag extractions */ - unsigned long tso; /* # of TSO requests */ - unsigned long rx_drops; /* # of packets dropped due to no mem */ + u64 rx_packets; /* # of Ethernet packets received */ + u64 rx_cso_good; /* # of successful RX csum offloads */ + u64 tx_packets; /* # of TX packets */ + u64 tx_cso; /* # of TX checksum offloads */ + u64 tx_tso; /* # of TSO requests */ + u64 vlan_xtract; /* # of VLAN tag extractions */ + u64 vlan_insert; /* # of VLAN tag insertions */ }; struct sk_buff; @@ -90,7 +85,11 @@ int t1_sge_intr_error_handler(struct sge *); void t1_sge_intr_enable(struct sge *); void t1_sge_intr_disable(struct sge *); void t1_sge_intr_clear(struct sge *); -const struct sge_intr_counts *t1_sge_get_intr_counts(struct sge *sge); -const struct sge_port_stats *t1_sge_get_port_stats(struct sge *sge, int port); +const struct sge_intr_counts *t1_sge_get_intr_counts(const struct sge *sge); +void t1_sge_get_port_stats(const struct sge *sge, int port, struct sge_port_stats *); +void t1_sched_set_max_avail_bytes(struct sge *, unsigned int); +void t1_sched_set_drain_bits_per_us(struct sge *, unsigned int, unsigned int); +unsigned int t1_sched_update_parms(struct sge *, unsigned int, unsigned int, + unsigned int); #endif /* _CXGB_SGE_H_ */ diff --git a/drivers/net/chelsio/subr.c b/drivers/net/chelsio/subr.c index 12e4e96dba2..22ed9a383c0 100644 --- a/drivers/net/chelsio/subr.c +++ b/drivers/net/chelsio/subr.c @@ -43,6 +43,7 @@ #include "gmac.h" #include "cphy.h" #include "sge.h" +#include "tp.h" #include "espi.h" /** @@ -59,7 +60,7 @@ * otherwise. */ static int t1_wait_op_done(adapter_t *adapter, int reg, u32 mask, int polarity, - int attempts, int delay) + int attempts, int delay) { while (1) { u32 val = readl(adapter->regs + reg) & mask; @@ -78,7 +79,7 @@ static int t1_wait_op_done(adapter_t *adapter, int reg, u32 mask, int polarity, /* * Write a register over the TPI interface (unlocked and locked versions). */ -static int __t1_tpi_write(adapter_t *adapter, u32 addr, u32 value) +int __t1_tpi_write(adapter_t *adapter, u32 addr, u32 value) { int tpi_busy; @@ -98,16 +99,16 @@ int t1_tpi_write(adapter_t *adapter, u32 addr, u32 value) { int ret; - spin_lock(&(adapter)->tpi_lock); + spin_lock(&adapter->tpi_lock); ret = __t1_tpi_write(adapter, addr, value); - spin_unlock(&(adapter)->tpi_lock); + spin_unlock(&adapter->tpi_lock); return ret; } /* * Read a register over the TPI interface (unlocked and locked versions). */ -static int __t1_tpi_read(adapter_t *adapter, u32 addr, u32 *valp) +int __t1_tpi_read(adapter_t *adapter, u32 addr, u32 *valp) { int tpi_busy; @@ -128,18 +129,26 @@ int t1_tpi_read(adapter_t *adapter, u32 addr, u32 *valp) { int ret; - spin_lock(&(adapter)->tpi_lock); + spin_lock(&adapter->tpi_lock); ret = __t1_tpi_read(adapter, addr, valp); - spin_unlock(&(adapter)->tpi_lock); + spin_unlock(&adapter->tpi_lock); return ret; } /* + * Set a TPI parameter. + */ +static void t1_tpi_par(adapter_t *adapter, u32 value) +{ + writel(V_TPIPAR(value), adapter->regs + A_TPI_PAR); +} + +/* * Called when a port's link settings change to propagate the new values to the * associated PHY and MAC. After performing the common tasks it invokes an * OS-specific handler. */ -/* static */ void link_changed(adapter_t *adapter, int port_id) +void t1_link_changed(adapter_t *adapter, int port_id) { int link_ok, speed, duplex, fc; struct cphy *phy = adapter->port[port_id].phy; @@ -159,23 +168,83 @@ int t1_tpi_read(adapter_t *adapter, u32 addr, u32 *valp) mac->ops->set_speed_duplex_fc(mac, speed, duplex, fc); lc->fc = (unsigned char)fc; } - t1_link_changed(adapter, port_id, link_ok, speed, duplex, fc); + t1_link_negotiated(adapter, port_id, link_ok, speed, duplex, fc); } static int t1_pci_intr_handler(adapter_t *adapter) { u32 pcix_cause; - pci_read_config_dword(adapter->pdev, A_PCICFG_INTR_CAUSE, &pcix_cause); + pci_read_config_dword(adapter->pdev, A_PCICFG_INTR_CAUSE, &pcix_cause); if (pcix_cause) { pci_write_config_dword(adapter->pdev, A_PCICFG_INTR_CAUSE, - pcix_cause); + pcix_cause); t1_fatal_err(adapter); /* PCI errors are fatal */ } return 0; } +#ifdef CONFIG_CHELSIO_T1_COUGAR +#include "cspi.h" +#endif +#ifdef CONFIG_CHELSIO_T1_1G +#include "fpga_defs.h" + +/* + * PHY interrupt handler for FPGA boards. + */ +static int fpga_phy_intr_handler(adapter_t *adapter) +{ + int p; + u32 cause = readl(adapter->regs + FPGA_GMAC_ADDR_INTERRUPT_CAUSE); + + for_each_port(adapter, p) + if (cause & (1 << p)) { + struct cphy *phy = adapter->port[p].phy; + int phy_cause = phy->ops->interrupt_handler(phy); + + if (phy_cause & cphy_cause_link_change) + t1_link_changed(adapter, p); + } + writel(cause, adapter->regs + FPGA_GMAC_ADDR_INTERRUPT_CAUSE); + return 0; +} + +/* + * Slow path interrupt handler for FPGAs. + */ +static int fpga_slow_intr(adapter_t *adapter) +{ + u32 cause = readl(adapter->regs + A_PL_CAUSE); + + cause &= ~F_PL_INTR_SGE_DATA; + if (cause & F_PL_INTR_SGE_ERR) + t1_sge_intr_error_handler(adapter->sge); + + if (cause & FPGA_PCIX_INTERRUPT_GMAC) + fpga_phy_intr_handler(adapter); + + if (cause & FPGA_PCIX_INTERRUPT_TP) { + /* + * FPGA doesn't support MC4 interrupts and it requires + * this odd layer of indirection for MC5. + */ + u32 tp_cause = readl(adapter->regs + FPGA_TP_ADDR_INTERRUPT_CAUSE); + + /* Clear TP interrupt */ + writel(tp_cause, adapter->regs + FPGA_TP_ADDR_INTERRUPT_CAUSE); + } + if (cause & FPGA_PCIX_INTERRUPT_PCIX) + t1_pci_intr_handler(adapter); + + /* Clear the interrupts just processed. */ + if (cause) + writel(cause, adapter->regs + A_PL_CAUSE); + + return cause != 0; +} +#endif /* * Wait until Elmer's MI1 interface is ready for new operations. @@ -212,12 +281,62 @@ static void mi1_mdio_init(adapter_t *adapter, const struct board_info *bi) t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_CFG, val); } +#if defined(CONFIG_CHELSIO_T1_1G) || defined(CONFIG_CHELSIO_T1_COUGAR) +/* + * Elmer MI1 MDIO read/write operations. + */ +static int mi1_mdio_read(adapter_t *adapter, int phy_addr, int mmd_addr, + int reg_addr, unsigned int *valp) +{ + u32 addr = V_MI1_REG_ADDR(reg_addr) | V_MI1_PHY_ADDR(phy_addr); + + if (mmd_addr) + return -EINVAL; + + spin_lock(&adapter->tpi_lock); + __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_ADDR, addr); + __t1_tpi_write(adapter, + A_ELMER0_PORT0_MI1_OP, MI1_OP_DIRECT_READ); + mi1_wait_until_ready(adapter, A_ELMER0_PORT0_MI1_OP); + __t1_tpi_read(adapter, A_ELMER0_PORT0_MI1_DATA, valp); + spin_unlock(&adapter->tpi_lock); + return 0; +} + +static int mi1_mdio_write(adapter_t *adapter, int phy_addr, int mmd_addr, + int reg_addr, unsigned int val) +{ + u32 addr = V_MI1_REG_ADDR(reg_addr) | V_MI1_PHY_ADDR(phy_addr); + + if (mmd_addr) + return -EINVAL; + + spin_lock(&adapter->tpi_lock); + __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_ADDR, addr); + __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_DATA, val); + __t1_tpi_write(adapter, + A_ELMER0_PORT0_MI1_OP, MI1_OP_DIRECT_WRITE); + mi1_wait_until_ready(adapter, A_ELMER0_PORT0_MI1_OP); + spin_unlock(&adapter->tpi_lock); + return 0; +} + +#if defined(CONFIG_CHELSIO_T1_1G) || defined(CONFIG_CHELSIO_T1_COUGAR) +static struct mdio_ops mi1_mdio_ops = { + mi1_mdio_init, + mi1_mdio_read, + mi1_mdio_write +}; +#endif + +#endif + static int mi1_mdio_ext_read(adapter_t *adapter, int phy_addr, int mmd_addr, int reg_addr, unsigned int *valp) { u32 addr = V_MI1_REG_ADDR(mmd_addr) | V_MI1_PHY_ADDR(phy_addr); - spin_lock(&(adapter)->tpi_lock); + spin_lock(&adapter->tpi_lock); /* Write the address we want. */ __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_ADDR, addr); @@ -227,12 +346,13 @@ static int mi1_mdio_ext_read(adapter_t *adapter, int phy_addr, int mmd_addr, mi1_wait_until_ready(adapter, A_ELMER0_PORT0_MI1_OP); /* Write the operation we want. */ - __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_OP, MI1_OP_INDIRECT_READ); + __t1_tpi_write(adapter, + A_ELMER0_PORT0_MI1_OP, MI1_OP_INDIRECT_READ); mi1_wait_until_ready(adapter, A_ELMER0_PORT0_MI1_OP); /* Read the data. */ __t1_tpi_read(adapter, A_ELMER0_PORT0_MI1_DATA, valp); - spin_unlock(&(adapter)->tpi_lock); + spin_unlock(&adapter->tpi_lock); return 0; } @@ -241,7 +361,7 @@ static int mi1_mdio_ext_write(adapter_t *adapter, int phy_addr, int mmd_addr, { u32 addr = V_MI1_REG_ADDR(mmd_addr) | V_MI1_PHY_ADDR(phy_addr); - spin_lock(&(adapter)->tpi_lock); + spin_lock(&adapter->tpi_lock); /* Write the address we want. */ __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_ADDR, addr); @@ -254,7 +374,7 @@ static int mi1_mdio_ext_write(adapter_t *adapter, int phy_addr, int mmd_addr, __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_DATA, val); __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_OP, MI1_OP_INDIRECT_WRITE); mi1_wait_until_ready(adapter, A_ELMER0_PORT0_MI1_OP); - spin_unlock(&(adapter)->tpi_lock); + spin_unlock(&adapter->tpi_lock); return 0; } @@ -265,12 +385,25 @@ static struct mdio_ops mi1_mdio_ext_ops = { }; enum { + CH_BRD_T110_1CU, CH_BRD_N110_1F, CH_BRD_N210_1F, + CH_BRD_T210_1F, + CH_BRD_T210_1CU, + CH_BRD_N204_4CU, }; static struct board_info t1_board[] = { +{ CHBT_BOARD_CHT110, 1/*ports#*/, + SUPPORTED_10000baseT_Full /*caps*/, CHBT_TERM_T1, + CHBT_MAC_PM3393, CHBT_PHY_MY3126, + 125000000/*clk-core*/, 150000000/*clk-mc3*/, 125000000/*clk-mc4*/, + 1/*espi-ports*/, 0/*clk-cspi*/, 44/*clk-elmer0*/, 1/*mdien*/, + 1/*mdiinv*/, 1/*mdc*/, 1/*phybaseaddr*/, &t1_pm3393_ops, + &t1_my3126_ops, &mi1_mdio_ext_ops, + "Chelsio T110 1x10GBase-CX4 TOE" }, + { CHBT_BOARD_N110, 1/*ports#*/, SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE /*caps*/, CHBT_TERM_T1, CHBT_MAC_PM3393, CHBT_PHY_88X2010, @@ -289,12 +422,47 @@ static struct board_info t1_board[] = { &t1_mv88x201x_ops, &mi1_mdio_ext_ops, "Chelsio N210 1x10GBaseX NIC" }, +{ CHBT_BOARD_CHT210, 1/*ports#*/, + SUPPORTED_10000baseT_Full /*caps*/, CHBT_TERM_T2, + CHBT_MAC_PM3393, CHBT_PHY_88X2010, + 125000000/*clk-core*/, 133000000/*clk-mc3*/, 125000000/*clk-mc4*/, + 1/*espi-ports*/, 0/*clk-cspi*/, 44/*clk-elmer0*/, 0/*mdien*/, + 0/*mdiinv*/, 1/*mdc*/, 0/*phybaseaddr*/, &t1_pm3393_ops, + &t1_mv88x201x_ops, &mi1_mdio_ext_ops, + "Chelsio T210 1x10GBaseX TOE" }, + +{ CHBT_BOARD_CHT210, 1/*ports#*/, + SUPPORTED_10000baseT_Full /*caps*/, CHBT_TERM_T2, + CHBT_MAC_PM3393, CHBT_PHY_MY3126, + 125000000/*clk-core*/, 133000000/*clk-mc3*/, 125000000/*clk-mc4*/, + 1/*espi-ports*/, 0/*clk-cspi*/, 44/*clk-elmer0*/, 1/*mdien*/, + 1/*mdiinv*/, 1/*mdc*/, 1/*phybaseaddr*/, &t1_pm3393_ops, + &t1_my3126_ops, &mi1_mdio_ext_ops, + "Chelsio T210 1x10GBase-CX4 TOE" }, + +#ifdef CONFIG_CHELSIO_T1_1G +{ CHBT_BOARD_CHN204, 4/*ports#*/, + SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full | SUPPORTED_100baseT_Half | + SUPPORTED_100baseT_Full | SUPPORTED_1000baseT_Full | SUPPORTED_Autoneg | + SUPPORTED_PAUSE | SUPPORTED_TP /*caps*/, CHBT_TERM_T2, CHBT_MAC_VSC7321, CHBT_PHY_88E1111, + 100000000/*clk-core*/, 0/*clk-mc3*/, 0/*clk-mc4*/, + 4/*espi-ports*/, 0/*clk-cspi*/, 44/*clk-elmer0*/, 0/*mdien*/, + 0/*mdiinv*/, 1/*mdc*/, 4/*phybaseaddr*/, &t1_vsc7326_ops, + &t1_mv88e1xxx_ops, &mi1_mdio_ops, + "Chelsio N204 4x100/1000BaseT NIC" }, +#endif + }; struct pci_device_id t1_pci_tbl[] = { + CH_DEVICE(8, 0, CH_BRD_T110_1CU), + CH_DEVICE(8, 1, CH_BRD_T110_1CU), CH_DEVICE(7, 0, CH_BRD_N110_1F), CH_DEVICE(10, 1, CH_BRD_N210_1F), - { 0, } + CH_DEVICE(11, 1, CH_BRD_T210_1F), + CH_DEVICE(14, 1, CH_BRD_T210_1CU), + CH_DEVICE(16, 1, CH_BRD_N204_4CU), + { 0 } }; MODULE_DEVICE_TABLE(pci, t1_pci_tbl); @@ -390,9 +558,14 @@ int t1_link_start(struct cphy *phy, struct cmac *mac, struct link_config *lc) if (lc->supported & SUPPORTED_Autoneg) { lc->advertising &= ~(ADVERTISED_ASYM_PAUSE | ADVERTISED_PAUSE); if (fc) { - lc->advertising |= ADVERTISED_ASYM_PAUSE; - if (fc == (PAUSE_RX | PAUSE_TX)) + if (fc == ((PAUSE_RX | PAUSE_TX) & + (mac->adapter->params.nports < 2))) lc->advertising |= ADVERTISED_PAUSE; + else { + lc->advertising |= ADVERTISED_ASYM_PAUSE; + if (fc == PAUSE_RX) + lc->advertising |= ADVERTISED_PAUSE; + } } phy->ops->advertise(phy, lc->advertising); @@ -403,11 +576,15 @@ int t1_link_start(struct cphy *phy, struct cmac *mac, struct link_config *lc) mac->ops->set_speed_duplex_fc(mac, lc->speed, lc->duplex, fc); /* Also disables autoneg */ + phy->state = PHY_AUTONEG_RDY; phy->ops->set_speed_duplex(phy, lc->speed, lc->duplex); phy->ops->reset(phy, 0); - } else + } else { + phy->state = PHY_AUTONEG_EN; phy->ops->autoneg_enable(phy); /* also resets PHY */ + } } else { + phy->state = PHY_AUTONEG_RDY; mac->ops->set_speed_duplex_fc(mac, -1, -1, fc); lc->fc = (unsigned char)fc; phy->ops->reset(phy, 0); @@ -418,24 +595,109 @@ int t1_link_start(struct cphy *phy, struct cmac *mac, struct link_config *lc) /* * External interrupt handler for boards using elmer0. */ -int elmer0_ext_intr_handler(adapter_t *adapter) +int t1_elmer0_ext_intr_handler(adapter_t *adapter) { - struct cphy *phy; + struct cphy *phy; int phy_cause; - u32 cause; + u32 cause; t1_tpi_read(adapter, A_ELMER0_INT_CAUSE, &cause); switch (board_info(adapter)->board) { +#ifdef CONFIG_CHELSIO_T1_1G + case CHBT_BOARD_CHT204: + case CHBT_BOARD_CHT204E: + case CHBT_BOARD_CHN204: + case CHBT_BOARD_CHT204V: { + int i, port_bit; + for_each_port(adapter, i) { + port_bit = i + 1; + if (!(cause & (1 << port_bit))) continue; + + phy = adapter->port[i].phy; + phy_cause = phy->ops->interrupt_handler(phy); + if (phy_cause & cphy_cause_link_change) + t1_link_changed(adapter, i); + } + break; + } + case CHBT_BOARD_CHT101: + if (cause & ELMER0_GP_BIT1) { /* Marvell 88E1111 interrupt */ + phy = adapter->port[0].phy; + phy_cause = phy->ops->interrupt_handler(phy); + if (phy_cause & cphy_cause_link_change) + t1_link_changed(adapter, 0); + } + break; + case CHBT_BOARD_7500: { + int p; + /* + * Elmer0's interrupt cause isn't useful here because there is + * only one bit that can be set for all 4 ports. This means + * we are forced to check every PHY's interrupt status + * register to see who initiated the interrupt. + */ + for_each_port(adapter, p) { + phy = adapter->port[p].phy; + phy_cause = phy->ops->interrupt_handler(phy); + if (phy_cause & cphy_cause_link_change) + t1_link_changed(adapter, p); + } + break; + } +#endif + case CHBT_BOARD_CHT210: case CHBT_BOARD_N210: case CHBT_BOARD_N110: if (cause & ELMER0_GP_BIT6) { /* Marvell 88x2010 interrupt */ phy = adapter->port[0].phy; phy_cause = phy->ops->interrupt_handler(phy); if (phy_cause & cphy_cause_link_change) - link_changed(adapter, 0); + t1_link_changed(adapter, 0); + } + break; + case CHBT_BOARD_8000: + case CHBT_BOARD_CHT110: + CH_DBG(adapter, INTR, "External interrupt cause 0x%x\n", + cause); + if (cause & ELMER0_GP_BIT1) { /* PMC3393 INTB */ + struct cmac *mac = adapter->port[0].mac; + + mac->ops->interrupt_handler(mac); } + if (cause & ELMER0_GP_BIT5) { /* XPAK MOD_DETECT */ + u32 mod_detect; + + t1_tpi_read(adapter, + A_ELMER0_GPI_STAT, &mod_detect); + CH_MSG(adapter, INFO, LINK, "XPAK %s\n", + mod_detect ? "removed" : "inserted"); + } break; +#ifdef CONFIG_CHELSIO_T1_COUGAR + case CHBT_BOARD_COUGAR: + if (adapter->params.nports == 1) { + if (cause & ELMER0_GP_BIT1) { /* Vitesse MAC */ + struct cmac *mac = adapter->port[0].mac; + mac->ops->interrupt_handler(mac); + } + if (cause & ELMER0_GP_BIT5) { /* XPAK MOD_DETECT */ + } + } else { + int i, port_bit; + + for_each_port(adapter, i) { + port_bit = i ? i + 1 : 0; + if (!(cause & (1 << port_bit))) continue; + + phy = adapter->port[i].phy; + phy_cause = phy->ops->interrupt_handler(phy); + if (phy_cause & cphy_cause_link_change) + t1_link_changed(adapter, i); + } + } + break; +#endif } t1_tpi_write(adapter, A_ELMER0_INT_CAUSE, cause); return 0; @@ -445,11 +707,11 @@ int elmer0_ext_intr_handler(adapter_t *adapter) void t1_interrupts_enable(adapter_t *adapter) { unsigned int i; - u32 pl_intr; - adapter->slow_intr_mask = F_PL_INTR_SGE_ERR; + adapter->slow_intr_mask = F_PL_INTR_SGE_ERR | F_PL_INTR_TP; t1_sge_intr_enable(adapter->sge); + t1_tp_intr_enable(adapter->tp); if (adapter->espi) { adapter->slow_intr_mask |= F_PL_INTR_ESPI; t1_espi_intr_enable(adapter->espi); @@ -462,15 +724,17 @@ void t1_interrupts_enable(adapter_t *adapter) } /* Enable PCIX & external chip interrupts on ASIC boards. */ - pl_intr = readl(adapter->regs + A_PL_ENABLE); + if (t1_is_asic(adapter)) { + u32 pl_intr = readl(adapter->regs + A_PL_ENABLE); - /* PCI-X interrupts */ - pci_write_config_dword(adapter->pdev, A_PCICFG_INTR_ENABLE, - 0xffffffff); + /* PCI-X interrupts */ + pci_write_config_dword(adapter->pdev, A_PCICFG_INTR_ENABLE, + 0xffffffff); - adapter->slow_intr_mask |= F_PL_INTR_EXT | F_PL_INTR_PCIX; - pl_intr |= F_PL_INTR_EXT | F_PL_INTR_PCIX; - writel(pl_intr, adapter->regs + A_PL_ENABLE); + adapter->slow_intr_mask |= F_PL_INTR_EXT | F_PL_INTR_PCIX; + pl_intr |= F_PL_INTR_EXT | F_PL_INTR_PCIX; + writel(pl_intr, adapter->regs + A_PL_ENABLE); + } } /* Disables all interrupts. */ @@ -479,6 +743,7 @@ void t1_interrupts_disable(adapter_t* adapter) unsigned int i; t1_sge_intr_disable(adapter->sge); + t1_tp_intr_disable(adapter->tp); if (adapter->espi) t1_espi_intr_disable(adapter->espi); @@ -489,7 +754,8 @@ void t1_interrupts_disable(adapter_t* adapter) } /* Disable PCIX & external chip interrupts. */ - writel(0, adapter->regs + A_PL_ENABLE); + if (t1_is_asic(adapter)) + writel(0, adapter->regs + A_PL_ENABLE); /* PCI-X interrupts */ pci_write_config_dword(adapter->pdev, A_PCICFG_INTR_ENABLE, 0); @@ -501,10 +767,9 @@ void t1_interrupts_disable(adapter_t* adapter) void t1_interrupts_clear(adapter_t* adapter) { unsigned int i; - u32 pl_intr; - t1_sge_intr_clear(adapter->sge); + t1_tp_intr_clear(adapter->tp); if (adapter->espi) t1_espi_intr_clear(adapter->espi); @@ -515,10 +780,12 @@ void t1_interrupts_clear(adapter_t* adapter) } /* Enable interrupts for external devices. */ - pl_intr = readl(adapter->regs + A_PL_CAUSE); + if (t1_is_asic(adapter)) { + u32 pl_intr = readl(adapter->regs + A_PL_CAUSE); - writel(pl_intr | F_PL_INTR_EXT | F_PL_INTR_PCIX, - adapter->regs + A_PL_CAUSE); + writel(pl_intr | F_PL_INTR_EXT | F_PL_INTR_PCIX, + adapter->regs + A_PL_CAUSE); + } /* PCI-X interrupts */ pci_write_config_dword(adapter->pdev, A_PCICFG_INTR_CAUSE, 0xffffffff); @@ -527,7 +794,7 @@ void t1_interrupts_clear(adapter_t* adapter) /* * Slow path interrupt handler for ASICs. */ -int t1_slow_intr_handler(adapter_t *adapter) +static int asic_slow_intr(adapter_t *adapter) { u32 cause = readl(adapter->regs + A_PL_CAUSE); @@ -536,89 +803,54 @@ int t1_slow_intr_handler(adapter_t *adapter) return 0; if (cause & F_PL_INTR_SGE_ERR) t1_sge_intr_error_handler(adapter->sge); + if (cause & F_PL_INTR_TP) + t1_tp_intr_handler(adapter->tp); if (cause & F_PL_INTR_ESPI) t1_espi_intr_handler(adapter->espi); if (cause & F_PL_INTR_PCIX) t1_pci_intr_handler(adapter); if (cause & F_PL_INTR_EXT) - t1_elmer0_ext_intr(adapter); + t1_elmer0_ext_intr_handler(adapter); /* Clear the interrupts just processed. */ writel(cause, adapter->regs + A_PL_CAUSE); - (void)readl(adapter->regs + A_PL_CAUSE); /* flush writes */ + readl(adapter->regs + A_PL_CAUSE); /* flush writes */ return 1; } -/* Pause deadlock avoidance parameters */ -#define DROP_MSEC 16 -#define DROP_PKTS_CNT 1 - -static void set_csum_offload(adapter_t *adapter, u32 csum_bit, int enable) -{ - u32 val = readl(adapter->regs + A_TP_GLOBAL_CONFIG); - - if (enable) - val |= csum_bit; - else - val &= ~csum_bit; - writel(val, adapter->regs + A_TP_GLOBAL_CONFIG); -} - -void t1_tp_set_ip_checksum_offload(adapter_t *adapter, int enable) -{ - set_csum_offload(adapter, F_IP_CSUM, enable); -} - -void t1_tp_set_udp_checksum_offload(adapter_t *adapter, int enable) -{ - set_csum_offload(adapter, F_UDP_CSUM, enable); -} - -void t1_tp_set_tcp_checksum_offload(adapter_t *adapter, int enable) +int t1_slow_intr_handler(adapter_t *adapter) { - set_csum_offload(adapter, F_TCP_CSUM, enable); +#ifdef CONFIG_CHELSIO_T1_1G + if (!t1_is_asic(adapter)) + return fpga_slow_intr(adapter); +#endif + return asic_slow_intr(adapter); } -static void t1_tp_reset(adapter_t *adapter, unsigned int tp_clk) +/* Power sequencing is a work-around for Intel's XPAKs. */ +static void power_sequence_xpak(adapter_t* adapter) { - u32 val; - - val = F_TP_IN_CSPI_CPL | F_TP_IN_CSPI_CHECK_IP_CSUM | - F_TP_IN_CSPI_CHECK_TCP_CSUM | F_TP_IN_ESPI_ETHERNET; - val |= F_TP_IN_ESPI_CHECK_IP_CSUM | - F_TP_IN_ESPI_CHECK_TCP_CSUM; - writel(val, adapter->regs + A_TP_IN_CONFIG); - writel(F_TP_OUT_CSPI_CPL | - F_TP_OUT_ESPI_ETHERNET | - F_TP_OUT_ESPI_GENERATE_IP_CSUM | - F_TP_OUT_ESPI_GENERATE_TCP_CSUM, - adapter->regs + A_TP_OUT_CONFIG); - - val = readl(adapter->regs + A_TP_GLOBAL_CONFIG); - val &= ~(F_IP_CSUM | F_UDP_CSUM | F_TCP_CSUM); - writel(val, adapter->regs + A_TP_GLOBAL_CONFIG); - - /* - * Enable pause frame deadlock prevention. - */ - if (is_T2(adapter)) { - u32 drop_ticks = DROP_MSEC * (tp_clk / 1000); - - writel(F_ENABLE_TX_DROP | F_ENABLE_TX_ERROR | - V_DROP_TICKS_CNT(drop_ticks) | - V_NUM_PKTS_DROPPED(DROP_PKTS_CNT), - adapter->regs + A_TP_TX_DROP_CONFIG); + u32 mod_detect; + u32 gpo; + + /* Check for XPAK */ + t1_tpi_read(adapter, A_ELMER0_GPI_STAT, &mod_detect); + if (!(ELMER0_GP_BIT5 & mod_detect)) { + /* XPAK is present */ + t1_tpi_read(adapter, A_ELMER0_GPO, &gpo); + gpo |= ELMER0_GP_BIT18; + t1_tpi_write(adapter, A_ELMER0_GPO, gpo); } - - writel(F_TP_RESET, adapter->regs + A_TP_RESET); } int __devinit t1_get_board_rev(adapter_t *adapter, const struct board_info *bi, struct adapter_params *p) { p->chip_version = bi->chip_term; + p->is_asic = (p->chip_version != CHBT_TERM_FPGA); if (p->chip_version == CHBT_TERM_T1 || - p->chip_version == CHBT_TERM_T2) { + p->chip_version == CHBT_TERM_T2 || + p->chip_version == CHBT_TERM_FPGA) { u32 val = readl(adapter->regs + A_TP_PC_CONFIG); val = G_TP_PC_REV(val); @@ -640,11 +872,38 @@ int __devinit t1_get_board_rev(adapter_t *adapter, const struct board_info *bi, static int board_init(adapter_t *adapter, const struct board_info *bi) { switch (bi->board) { + case CHBT_BOARD_8000: case CHBT_BOARD_N110: case CHBT_BOARD_N210: - writel(V_TPIPAR(0xf), adapter->regs + A_TPI_PAR); + case CHBT_BOARD_CHT210: + case CHBT_BOARD_COUGAR: + t1_tpi_par(adapter, 0xf); t1_tpi_write(adapter, A_ELMER0_GPO, 0x800); break; + case CHBT_BOARD_CHT110: + t1_tpi_par(adapter, 0xf); + t1_tpi_write(adapter, A_ELMER0_GPO, 0x1800); + + /* TBD XXX Might not need. This fixes a problem + * described in the Intel SR XPAK errata. + */ + power_sequence_xpak(adapter); + break; +#ifdef CONFIG_CHELSIO_T1_1G + case CHBT_BOARD_CHT204E: + /* add config space write here */ + case CHBT_BOARD_CHT204: + case CHBT_BOARD_CHT204V: + case CHBT_BOARD_CHN204: + t1_tpi_par(adapter, 0xf); + t1_tpi_write(adapter, A_ELMER0_GPO, 0x804); + break; + case CHBT_BOARD_CHT101: + case CHBT_BOARD_7500: + t1_tpi_par(adapter, 0xf); + t1_tpi_write(adapter, A_ELMER0_GPO, 0x1804); + break; +#endif } return 0; } @@ -666,11 +925,16 @@ int t1_init_hw_modules(adapter_t *adapter) adapter->regs + A_MC5_CONFIG); } +#ifdef CONFIG_CHELSIO_T1_COUGAR + if (adapter->cspi && t1_cspi_init(adapter->cspi)) + goto out_err; +#endif if (adapter->espi && t1_espi_init(adapter->espi, bi->chip_mac, bi->espi_nports)) goto out_err; - t1_tp_reset(adapter, bi->clock_core); + if (t1_tp_reset(adapter->tp, &adapter->params.tp, bi->clock_core)) + goto out_err; err = t1_sge_configure(adapter->sge, &adapter->params.sge); if (err) @@ -714,8 +978,14 @@ void t1_free_sw_modules(adapter_t *adapter) if (adapter->sge) t1_sge_destroy(adapter->sge); + if (adapter->tp) + t1_tp_destroy(adapter->tp); if (adapter->espi) t1_espi_destroy(adapter->espi); +#ifdef CONFIG_CHELSIO_T1_COUGAR + if (adapter->cspi) + t1_cspi_destroy(adapter->cspi); +#endif } static void __devinit init_link_config(struct link_config *lc, @@ -735,6 +1005,13 @@ static void __devinit init_link_config(struct link_config *lc, } } +#ifdef CONFIG_CHELSIO_T1_COUGAR + if (bi->clock_cspi && !(adapter->cspi = t1_cspi_create(adapter))) { + CH_ERR("%s: CSPI initialization failed\n", + adapter->name); + goto error; + } +#endif /* * Allocate and initialize the data structures that hold the SW state of @@ -762,6 +1039,13 @@ int __devinit t1_init_sw_modules(adapter_t *adapter, goto error; } + adapter->tp = t1_tp_create(adapter, &adapter->params.tp); + if (!adapter->tp) { + CH_ERR("%s: TP initialization failed\n", + adapter->name); + goto error; + } + board_init(adapter, bi); bi->mdio_ops->init(adapter, bi); if (bi->gphy->reset) @@ -793,7 +1077,9 @@ int __devinit t1_init_sw_modules(adapter_t *adapter, * Get the port's MAC addresses either from the EEPROM if one * exists or the one hardcoded in the MAC. */ - if (vpd_macaddress_get(adapter, i, hw_addr)) { + if (!t1_is_asic(adapter) || bi->chip_mac == CHBT_MAC_DUMMY) + mac->ops->macaddress_get(mac, hw_addr); + else if (vpd_macaddress_get(adapter, i, hw_addr)) { CH_ERR("%s: could not read MAC address from VPD ROM\n", adapter->port[i].dev->name); goto error; @@ -806,7 +1092,7 @@ int __devinit t1_init_sw_modules(adapter_t *adapter, t1_interrupts_clear(adapter); return 0; - error: +error: t1_free_sw_modules(adapter); return -1; } diff --git a/drivers/net/chelsio/suni1x10gexp_regs.h b/drivers/net/chelsio/suni1x10gexp_regs.h index 81816c2b708..269d097dd92 100644 --- a/drivers/net/chelsio/suni1x10gexp_regs.h +++ b/drivers/net/chelsio/suni1x10gexp_regs.h @@ -32,6 +32,30 @@ #ifndef _CXGB_SUNI1x10GEXP_REGS_H_ #define _CXGB_SUNI1x10GEXP_REGS_H_ +/* +** Space allocated for each Exact Match Filter +** There are 8 filter configurations +*/ +#define SUNI1x10GEXP_REG_SIZEOF_MAC_FILTER 0x0003 + +#define mSUNI1x10GEXP_MAC_FILTER_OFFSET(filterId) ( (filterId) * SUNI1x10GEXP_REG_SIZEOF_MAC_FILTER ) + +/* +** Space allocated for VLAN-Id Filter +** There are 8 filter configurations +*/ +#define SUNI1x10GEXP_REG_SIZEOF_MAC_VID_FILTER 0x0001 + +#define mSUNI1x10GEXP_MAC_VID_FILTER_OFFSET(filterId) ( (filterId) * SUNI1x10GEXP_REG_SIZEOF_MAC_VID_FILTER ) + +/* +** Space allocated for each MSTAT Counter +*/ +#define SUNI1x10GEXP_REG_SIZEOF_MSTAT_COUNT 0x0004 + +#define mSUNI1x10GEXP_MSTAT_COUNT_OFFSET(countId) ( (countId) * SUNI1x10GEXP_REG_SIZEOF_MSTAT_COUNT ) + + /******************************************************************************/ /** S/UNI-1x10GE-XP REGISTER ADDRESS MAP **/ /******************************************************************************/ @@ -39,33 +63,125 @@ /* to the S/UNI-1x10GE-XP Data Sheet for the signification of each bit */ /******************************************************************************/ + +#define SUNI1x10GEXP_REG_IDENTIFICATION 0x0000 +#define SUNI1x10GEXP_REG_PRODUCT_REVISION 0x0001 +#define SUNI1x10GEXP_REG_CONFIG_AND_RESET_CONTROL 0x0002 +#define SUNI1x10GEXP_REG_LOOPBACK_MISC_CTRL 0x0003 #define SUNI1x10GEXP_REG_DEVICE_STATUS 0x0004 +#define SUNI1x10GEXP_REG_GLOBAL_PERFORMANCE_MONITOR_UPDATE 0x0005 + +#define SUNI1x10GEXP_REG_MDIO_COMMAND 0x0006 +#define SUNI1x10GEXP_REG_MDIO_INTERRUPT_ENABLE 0x0007 +#define SUNI1x10GEXP_REG_MDIO_INTERRUPT_STATUS 0x0008 +#define SUNI1x10GEXP_REG_MMD_PHY_ADDRESS 0x0009 +#define SUNI1x10GEXP_REG_MMD_CONTROL_ADDRESS_DATA 0x000A +#define SUNI1x10GEXP_REG_MDIO_READ_STATUS_DATA 0x000B + +#define SUNI1x10GEXP_REG_OAM_INTF_CTRL 0x000C #define SUNI1x10GEXP_REG_MASTER_INTERRUPT_STATUS 0x000D #define SUNI1x10GEXP_REG_GLOBAL_INTERRUPT_ENABLE 0x000E +#define SUNI1x10GEXP_REG_FREE 0x000F + +#define SUNI1x10GEXP_REG_XTEF_MISC_CTRL 0x0010 +#define SUNI1x10GEXP_REG_XRF_MISC_CTRL 0x0011 + +#define SUNI1x10GEXP_REG_SERDES_3125_CONFIG_1 0x0100 +#define SUNI1x10GEXP_REG_SERDES_3125_CONFIG_2 0x0101 #define SUNI1x10GEXP_REG_SERDES_3125_INTERRUPT_ENABLE 0x0102 +#define SUNI1x10GEXP_REG_SERDES_3125_INTERRUPT_VISIBLE 0x0103 #define SUNI1x10GEXP_REG_SERDES_3125_INTERRUPT_STATUS 0x0104 +#define SUNI1x10GEXP_REG_SERDES_3125_TEST_CONFIG 0x0107 + #define SUNI1x10GEXP_REG_RXXG_CONFIG_1 0x2040 +#define SUNI1x10GEXP_REG_RXXG_CONFIG_2 0x2041 #define SUNI1x10GEXP_REG_RXXG_CONFIG_3 0x2042 #define SUNI1x10GEXP_REG_RXXG_INTERRUPT 0x2043 #define SUNI1x10GEXP_REG_RXXG_MAX_FRAME_LENGTH 0x2045 #define SUNI1x10GEXP_REG_RXXG_SA_15_0 0x2046 #define SUNI1x10GEXP_REG_RXXG_SA_31_16 0x2047 #define SUNI1x10GEXP_REG_RXXG_SA_47_32 0x2048 +#define SUNI1x10GEXP_REG_RXXG_RECEIVE_FIFO_THRESHOLD 0x2049 +#define mSUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_LOW(filterId) (0x204A + mSUNI1x10GEXP_MAC_FILTER_OFFSET(filterId)) +#define mSUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_MID(filterId) (0x204B + mSUNI1x10GEXP_MAC_FILTER_OFFSET(filterId)) +#define mSUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_HIGH(filterId)(0x204C + mSUNI1x10GEXP_MAC_FILTER_OFFSET(filterId)) +#define mSUNI1x10GEXP_REG_RXXG_EXACT_MATCH_VID(filterId) (0x2062 + mSUNI1x10GEXP_MAC_VID_FILTER_OFFSET(filterId) +#define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_0_LOW 0x204A +#define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_0_MID 0x204B +#define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_0_HIGH 0x204C #define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_1_LOW 0x204D #define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_1_MID 0x204E #define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_1_HIGH 0x204F +#define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_2_LOW 0x2050 +#define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_2_MID 0x2051 +#define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_2_HIGH 0x2052 +#define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_3_LOW 0x2053 +#define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_3_MID 0x2054 +#define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_3_HIGH 0x2055 +#define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_4_LOW 0x2056 +#define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_4_MID 0x2057 +#define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_4_HIGH 0x2058 +#define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_5_LOW 0x2059 +#define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_5_MID 0x205A +#define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_5_HIGH 0x205B +#define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_6_LOW 0x205C +#define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_6_MID 0x205D +#define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_6_HIGH 0x205E +#define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_7_LOW 0x205F +#define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_7_MID 0x2060 +#define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_7_HIGH 0x2061 +#define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_VID_0 0x2062 +#define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_VID_1 0x2063 +#define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_VID_2 0x2064 +#define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_VID_3 0x2065 +#define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_VID_4 0x2066 +#define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_VID_5 0x2067 +#define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_VID_6 0x2068 +#define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_VID_7 0x2069 #define SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_LOW 0x206A #define SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_MIDLOW 0x206B #define SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_MIDHIGH 0x206C #define SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_HIGH 0x206D #define SUNI1x10GEXP_REG_RXXG_ADDRESS_FILTER_CONTROL_0 0x206E +#define SUNI1x10GEXP_REG_RXXG_ADDRESS_FILTER_CONTROL_1 0x206F #define SUNI1x10GEXP_REG_RXXG_ADDRESS_FILTER_CONTROL_2 0x2070 + +#define SUNI1x10GEXP_REG_XRF_PATTERN_GEN_CTRL 0x2081 +#define SUNI1x10GEXP_REG_XRF_8BTB_ERR_COUNT_LANE_0 0x2084 +#define SUNI1x10GEXP_REG_XRF_8BTB_ERR_COUNT_LANE_1 0x2085 +#define SUNI1x10GEXP_REG_XRF_8BTB_ERR_COUNT_LANE_2 0x2086 +#define SUNI1x10GEXP_REG_XRF_8BTB_ERR_COUNT_LANE_3 0x2087 #define SUNI1x10GEXP_REG_XRF_INTERRUPT_ENABLE 0x2088 #define SUNI1x10GEXP_REG_XRF_INTERRUPT_STATUS 0x2089 +#define SUNI1x10GEXP_REG_XRF_ERR_STATUS 0x208A #define SUNI1x10GEXP_REG_XRF_DIAG_INTERRUPT_ENABLE 0x208B #define SUNI1x10GEXP_REG_XRF_DIAG_INTERRUPT_STATUS 0x208C +#define SUNI1x10GEXP_REG_XRF_CODE_ERR_THRES 0x2092 + +#define SUNI1x10GEXP_REG_RXOAM_CONFIG 0x20C0 +#define SUNI1x10GEXP_REG_RXOAM_FILTER_1_CONFIG 0x20C1 +#define SUNI1x10GEXP_REG_RXOAM_FILTER_2_CONFIG 0x20C2 +#define SUNI1x10GEXP_REG_RXOAM_CONFIG_2 0x20C3 +#define SUNI1x10GEXP_REG_RXOAM_HEC_CONFIG 0x20C4 +#define SUNI1x10GEXP_REG_RXOAM_HEC_ERR_THRES 0x20C5 #define SUNI1x10GEXP_REG_RXOAM_INTERRUPT_ENABLE 0x20C7 #define SUNI1x10GEXP_REG_RXOAM_INTERRUPT_STATUS 0x20C8 +#define SUNI1x10GEXP_REG_RXOAM_STATUS 0x20C9 +#define SUNI1x10GEXP_REG_RXOAM_HEC_ERR_COUNT 0x20CA +#define SUNI1x10GEXP_REG_RXOAM_FIFO_OVERFLOW_COUNT 0x20CB +#define SUNI1x10GEXP_REG_RXOAM_FILTER_MISMATCH_COUNT_LSB 0x20CC +#define SUNI1x10GEXP_REG_RXOAM_FILTER_MISMATCH_COUNT_MSB 0x20CD +#define SUNI1x10GEXP_REG_RXOAM_FILTER_1_MISMATCH_COUNT_LSB 0x20CE +#define SUNI1x10GEXP_REG_RXOAM_FILTER_1_MISMATCH_COUNT_MSB 0x20CF +#define SUNI1x10GEXP_REG_RXOAM_FILTER_2_MISMATCH_COUNT_LSB 0x20D0 +#define SUNI1x10GEXP_REG_RXOAM_FILTER_2_MISMATCH_COUNT_MSB 0x20D1 +#define SUNI1x10GEXP_REG_RXOAM_OAM_EXTRACT_COUNT_LSB 0x20D2 +#define SUNI1x10GEXP_REG_RXOAM_OAM_EXTRACT_COUNT_MSB 0x20D3 +#define SUNI1x10GEXP_REG_RXOAM_MINI_PACKET_COUNT_LSB 0x20D4 +#define SUNI1x10GEXP_REG_RXOAM_MINI_PACKET_COUNT_MSB 0x20D5 +#define SUNI1x10GEXP_REG_RXOAM_FILTER_MISMATCH_THRES_LSB 0x20D6 +#define SUNI1x10GEXP_REG_RXOAM_FILTER_MISMATCH_THRES_MSB 0x20D7 + #define SUNI1x10GEXP_REG_MSTAT_CONTROL 0x2100 #define SUNI1x10GEXP_REG_MSTAT_COUNTER_ROLLOVER_0 0x2101 #define SUNI1x10GEXP_REG_MSTAT_COUNTER_ROLLOVER_1 0x2102 @@ -75,50 +191,321 @@ #define SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_1 0x2106 #define SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_2 0x2107 #define SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_3 0x2108 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_WRITE_ADDRESS 0x2109 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_WRITE_DATA_LOW 0x210A +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_WRITE_DATA_MIDDLE 0x210B +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_WRITE_DATA_HIGH 0x210C +#define mSUNI1x10GEXP_REG_MSTAT_COUNTER_LOW(countId) (0x2110 + mSUNI1x10GEXP_MSTAT_COUNT_OFFSET(countId)) +#define mSUNI1x10GEXP_REG_MSTAT_COUNTER_MID(countId) (0x2111 + mSUNI1x10GEXP_MSTAT_COUNT_OFFSET(countId)) +#define mSUNI1x10GEXP_REG_MSTAT_COUNTER_HIGH(countId) (0x2112 + mSUNI1x10GEXP_MSTAT_COUNT_OFFSET(countId)) #define SUNI1x10GEXP_REG_MSTAT_COUNTER_0_LOW 0x2110 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_0_MID 0x2111 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_0_HIGH 0x2112 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_0_RESVD 0x2113 #define SUNI1x10GEXP_REG_MSTAT_COUNTER_1_LOW 0x2114 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_1_MID 0x2115 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_1_HIGH 0x2116 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_1_RESVD 0x2117 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_2_LOW 0x2118 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_2_MID 0x2119 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_2_HIGH 0x211A +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_2_RESVD 0x211B +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_3_LOW 0x211C +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_3_MID 0x211D +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_3_HIGH 0x211E +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_3_RESVD 0x211F #define SUNI1x10GEXP_REG_MSTAT_COUNTER_4_LOW 0x2120 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_4_MID 0x2121 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_4_HIGH 0x2122 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_4_RESVD 0x2123 #define SUNI1x10GEXP_REG_MSTAT_COUNTER_5_LOW 0x2124 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_5_MID 0x2125 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_5_HIGH 0x2126 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_5_RESVD 0x2127 #define SUNI1x10GEXP_REG_MSTAT_COUNTER_6_LOW 0x2128 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_6_MID 0x2129 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_6_HIGH 0x212A +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_6_RESVD 0x212B +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_7_LOW 0x212C +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_7_MID 0x212D +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_7_HIGH 0x212E +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_7_RESVD 0x212F #define SUNI1x10GEXP_REG_MSTAT_COUNTER_8_LOW 0x2130 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_8_MID 0x2131 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_8_HIGH 0x2132 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_8_RESVD 0x2133 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_9_LOW 0x2134 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_9_MID 0x2135 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_9_HIGH 0x2136 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_9_RESVD 0x2137 #define SUNI1x10GEXP_REG_MSTAT_COUNTER_10_LOW 0x2138 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_10_MID 0x2139 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_10_HIGH 0x213A +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_10_RESVD 0x213B #define SUNI1x10GEXP_REG_MSTAT_COUNTER_11_LOW 0x213C +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_11_MID 0x213D +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_11_HIGH 0x213E +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_11_RESVD 0x213F #define SUNI1x10GEXP_REG_MSTAT_COUNTER_12_LOW 0x2140 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_12_MID 0x2141 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_12_HIGH 0x2142 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_12_RESVD 0x2143 #define SUNI1x10GEXP_REG_MSTAT_COUNTER_13_LOW 0x2144 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_13_MID 0x2145 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_13_HIGH 0x2146 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_13_RESVD 0x2147 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_14_LOW 0x2148 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_14_MID 0x2149 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_14_HIGH 0x214A +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_14_RESVD 0x214B #define SUNI1x10GEXP_REG_MSTAT_COUNTER_15_LOW 0x214C +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_15_MID 0x214D +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_15_HIGH 0x214E +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_15_RESVD 0x214F #define SUNI1x10GEXP_REG_MSTAT_COUNTER_16_LOW 0x2150 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_16_MID 0x2151 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_16_HIGH 0x2152 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_16_RESVD 0x2153 #define SUNI1x10GEXP_REG_MSTAT_COUNTER_17_LOW 0x2154 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_17_MID 0x2155 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_17_HIGH 0x2156 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_17_RESVD 0x2157 #define SUNI1x10GEXP_REG_MSTAT_COUNTER_18_LOW 0x2158 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_18_MID 0x2159 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_18_HIGH 0x215A +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_18_RESVD 0x215B +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_19_LOW 0x215C +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_19_MID 0x215D +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_19_HIGH 0x215E +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_19_RESVD 0x215F +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_20_LOW 0x2160 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_20_MID 0x2161 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_20_HIGH 0x2162 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_20_RESVD 0x2163 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_21_LOW 0x2164 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_21_MID 0x2165 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_21_HIGH 0x2166 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_21_RESVD 0x2167 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_22_LOW 0x2168 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_22_MID 0x2169 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_22_HIGH 0x216A +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_22_RESVD 0x216B +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_23_LOW 0x216C +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_23_MID 0x216D +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_23_HIGH 0x216E +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_23_RESVD 0x216F +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_24_LOW 0x2170 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_24_MID 0x2171 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_24_HIGH 0x2172 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_24_RESVD 0x2173 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_25_LOW 0x2174 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_25_MID 0x2175 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_25_HIGH 0x2176 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_25_RESVD 0x2177 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_26_LOW 0x2178 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_26_MID 0x2179 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_26_HIGH 0x217a +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_26_RESVD 0x217b +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_27_LOW 0x217c +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_27_MID 0x217d +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_27_HIGH 0x217e +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_27_RESVD 0x217f +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_28_LOW 0x2180 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_28_MID 0x2181 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_28_HIGH 0x2182 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_28_RESVD 0x2183 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_29_LOW 0x2184 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_29_MID 0x2185 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_29_HIGH 0x2186 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_29_RESVD 0x2187 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_30_LOW 0x2188 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_30_MID 0x2189 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_30_HIGH 0x218A +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_30_RESVD 0x218B +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_31_LOW 0x218C +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_31_MID 0x218D +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_31_HIGH 0x218E +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_31_RESVD 0x218F +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_32_LOW 0x2190 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_32_MID 0x2191 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_32_HIGH 0x2192 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_32_RESVD 0x2193 #define SUNI1x10GEXP_REG_MSTAT_COUNTER_33_LOW 0x2194 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_33_MID 0x2195 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_33_HIGH 0x2196 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_33_RESVD 0x2197 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_34_LOW 0x2198 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_34_MID 0x2199 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_34_HIGH 0x219A +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_34_RESVD 0x219B #define SUNI1x10GEXP_REG_MSTAT_COUNTER_35_LOW 0x219C +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_35_MID 0x219D +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_35_HIGH 0x219E +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_35_RESVD 0x219F #define SUNI1x10GEXP_REG_MSTAT_COUNTER_36_LOW 0x21A0 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_36_MID 0x21A1 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_36_HIGH 0x21A2 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_36_RESVD 0x21A3 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_37_LOW 0x21A4 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_37_MID 0x21A5 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_37_HIGH 0x21A6 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_37_RESVD 0x21A7 #define SUNI1x10GEXP_REG_MSTAT_COUNTER_38_LOW 0x21A8 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_38_MID 0x21A9 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_38_HIGH 0x21AA +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_38_RESVD 0x21AB +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_39_LOW 0x21AC +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_39_MID 0x21AD +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_39_HIGH 0x21AE +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_39_RESVD 0x21AF #define SUNI1x10GEXP_REG_MSTAT_COUNTER_40_LOW 0x21B0 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_40_MID 0x21B1 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_40_HIGH 0x21B2 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_40_RESVD 0x21B3 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_41_LOW 0x21B4 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_41_MID 0x21B5 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_41_HIGH 0x21B6 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_41_RESVD 0x21B7 #define SUNI1x10GEXP_REG_MSTAT_COUNTER_42_LOW 0x21B8 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_42_MID 0x21B9 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_42_HIGH 0x21BA +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_42_RESVD 0x21BB #define SUNI1x10GEXP_REG_MSTAT_COUNTER_43_LOW 0x21BC +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_43_MID 0x21BD +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_43_HIGH 0x21BE +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_43_RESVD 0x21BF +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_44_LOW 0x21C0 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_44_MID 0x21C1 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_44_HIGH 0x21C2 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_44_RESVD 0x21C3 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_45_LOW 0x21C4 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_45_MID 0x21C5 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_45_HIGH 0x21C6 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_45_RESVD 0x21C7 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_46_LOW 0x21C8 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_46_MID 0x21C9 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_46_HIGH 0x21CA +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_46_RESVD 0x21CB +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_47_LOW 0x21CC +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_47_MID 0x21CD +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_47_HIGH 0x21CE +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_47_RESVD 0x21CF +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_48_LOW 0x21D0 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_48_MID 0x21D1 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_48_HIGH 0x21D2 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_48_RESVD 0x21D3 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_49_LOW 0x21D4 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_49_MID 0x21D5 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_49_HIGH 0x21D6 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_49_RESVD 0x21D7 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_50_LOW 0x21D8 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_50_MID 0x21D9 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_50_HIGH 0x21DA +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_50_RESVD 0x21DB +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_51_LOW 0x21DC +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_51_MID 0x21DD +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_51_HIGH 0x21DE +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_51_RESVD 0x21DF +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_52_LOW 0x21E0 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_52_MID 0x21E1 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_52_HIGH 0x21E2 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_52_RESVD 0x21E3 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_53_LOW 0x21E4 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_53_MID 0x21E5 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_53_HIGH 0x21E6 +#define SUNI1x10GEXP_CNTR_MAC_ETHERNET_NUM 51 + +#define SUNI1x10GEXP_REG_IFLX_GLOBAL_CONFIG 0x2200 +#define SUNI1x10GEXP_REG_IFLX_CHANNEL_PROVISION 0x2201 #define SUNI1x10GEXP_REG_IFLX_FIFO_OVERFLOW_ENABLE 0x2209 #define SUNI1x10GEXP_REG_IFLX_FIFO_OVERFLOW_INTERRUPT 0x220A +#define SUNI1x10GEXP_REG_IFLX_INDIR_CHANNEL_ADDRESS 0x220D +#define SUNI1x10GEXP_REG_IFLX_INDIR_LOGICAL_FIFO_LOW_LIMIT_PROVISION 0x220E +#define SUNI1x10GEXP_REG_IFLX_INDIR_LOGICAL_FIFO_HIGH_LIMIT 0x220F +#define SUNI1x10GEXP_REG_IFLX_INDIR_FULL_ALMOST_FULL_STATUS_LIMIT 0x2210 +#define SUNI1x10GEXP_REG_IFLX_INDIR_EMPTY_ALMOST_EMPTY_STATUS_LIMIT 0x2211 + +#define SUNI1x10GEXP_REG_PL4MOS_CONFIG 0x2240 +#define SUNI1x10GEXP_REG_PL4MOS_MASK 0x2241 +#define SUNI1x10GEXP_REG_PL4MOS_FAIRNESS_MASKING 0x2242 +#define SUNI1x10GEXP_REG_PL4MOS_MAXBURST1 0x2243 +#define SUNI1x10GEXP_REG_PL4MOS_MAXBURST2 0x2244 +#define SUNI1x10GEXP_REG_PL4MOS_TRANSFER_SIZE 0x2245 + +#define SUNI1x10GEXP_REG_PL4ODP_CONFIG 0x2280 #define SUNI1x10GEXP_REG_PL4ODP_INTERRUPT_MASK 0x2282 #define SUNI1x10GEXP_REG_PL4ODP_INTERRUPT 0x2283 +#define SUNI1x10GEXP_REG_PL4ODP_CONFIG_MAX_T 0x2284 + #define SUNI1x10GEXP_REG_PL4IO_LOCK_DETECT_STATUS 0x2300 #define SUNI1x10GEXP_REG_PL4IO_LOCK_DETECT_CHANGE 0x2301 #define SUNI1x10GEXP_REG_PL4IO_LOCK_DETECT_MASK 0x2302 +#define SUNI1x10GEXP_REG_PL4IO_LOCK_DETECT_LIMITS 0x2303 +#define SUNI1x10GEXP_REG_PL4IO_CALENDAR_REPETITIONS 0x2304 +#define SUNI1x10GEXP_REG_PL4IO_CONFIG 0x2305 + #define SUNI1x10GEXP_REG_TXXG_CONFIG_1 0x3040 +#define SUNI1x10GEXP_REG_TXXG_CONFIG_2 0x3041 #define SUNI1x10GEXP_REG_TXXG_CONFIG_3 0x3042 #define SUNI1x10GEXP_REG_TXXG_INTERRUPT 0x3043 +#define SUNI1x10GEXP_REG_TXXG_STATUS 0x3044 #define SUNI1x10GEXP_REG_TXXG_MAX_FRAME_SIZE 0x3045 +#define SUNI1x10GEXP_REG_TXXG_MIN_FRAME_SIZE 0x3046 #define SUNI1x10GEXP_REG_TXXG_SA_15_0 0x3047 #define SUNI1x10GEXP_REG_TXXG_SA_31_16 0x3048 #define SUNI1x10GEXP_REG_TXXG_SA_47_32 0x3049 +#define SUNI1x10GEXP_REG_TXXG_PAUSE_TIMER 0x304D +#define SUNI1x10GEXP_REG_TXXG_PAUSE_TIMER_INTERVAL 0x304E +#define SUNI1x10GEXP_REG_TXXG_FILTER_ERROR_COUNTER 0x3051 +#define SUNI1x10GEXP_REG_TXXG_PAUSE_QUANTUM_CONFIG 0x3052 + +#define SUNI1x10GEXP_REG_XTEF_CTRL 0x3080 #define SUNI1x10GEXP_REG_XTEF_INTERRUPT_STATUS 0x3084 #define SUNI1x10GEXP_REG_XTEF_INTERRUPT_ENABLE 0x3085 +#define SUNI1x10GEXP_REG_XTEF_VISIBILITY 0x3086 + +#define SUNI1x10GEXP_REG_TXOAM_OAM_CONFIG 0x30C0 +#define SUNI1x10GEXP_REG_TXOAM_MINI_RATE_CONFIG 0x30C1 +#define SUNI1x10GEXP_REG_TXOAM_MINI_GAP_FIFO_CONFIG 0x30C2 +#define SUNI1x10GEXP_REG_TXOAM_P1P2_STATIC_VALUES 0x30C3 +#define SUNI1x10GEXP_REG_TXOAM_P3P4_STATIC_VALUES 0x30C4 +#define SUNI1x10GEXP_REG_TXOAM_P5P6_STATIC_VALUES 0x30C5 #define SUNI1x10GEXP_REG_TXOAM_INTERRUPT_ENABLE 0x30C6 #define SUNI1x10GEXP_REG_TXOAM_INTERRUPT_STATUS 0x30C7 +#define SUNI1x10GEXP_REG_TXOAM_INSERT_COUNT_LSB 0x30C8 +#define SUNI1x10GEXP_REG_TXOAM_INSERT_COUNT_MSB 0x30C9 +#define SUNI1x10GEXP_REG_TXOAM_OAM_MINI_COUNT_LSB 0x30CA +#define SUNI1x10GEXP_REG_TXOAM_OAM_MINI_COUNT_MSB 0x30CB +#define SUNI1x10GEXP_REG_TXOAM_P1P2_MINI_MASK 0x30CC +#define SUNI1x10GEXP_REG_TXOAM_P3P4_MINI_MASK 0x30CD +#define SUNI1x10GEXP_REG_TXOAM_P5P6_MINI_MASK 0x30CE +#define SUNI1x10GEXP_REG_TXOAM_COSET 0x30CF +#define SUNI1x10GEXP_REG_TXOAM_EMPTY_FIFO_INS_OP_CNT_LSB 0x30D0 +#define SUNI1x10GEXP_REG_TXOAM_EMPTY_FIFO_INS_OP_CNT_MSB 0x30D1 +#define SUNI1x10GEXP_REG_TXOAM_STATIC_VALUE_MINI_COUNT_LSB 0x30D2 +#define SUNI1x10GEXP_REG_TXOAM_STATIC_VALUE_MINI_COUNT_MSB 0x30D3 + + +#define SUNI1x10GEXP_REG_EFLX_GLOBAL_CONFIG 0x3200 +#define SUNI1x10GEXP_REG_EFLX_ERCU_GLOBAL_STATUS 0x3201 +#define SUNI1x10GEXP_REG_EFLX_INDIR_CHANNEL_ADDRESS 0x3202 +#define SUNI1x10GEXP_REG_EFLX_INDIR_FIFO_LOW_LIMIT 0x3203 +#define SUNI1x10GEXP_REG_EFLX_INDIR_FIFO_HIGH_LIMIT 0x3204 +#define SUNI1x10GEXP_REG_EFLX_INDIR_FULL_ALMOST_FULL_STATUS_AND_LIMIT 0x3205 +#define SUNI1x10GEXP_REG_EFLX_INDIR_EMPTY_ALMOST_EMPTY_STATUS_AND_LIMIT 0x3206 +#define SUNI1x10GEXP_REG_EFLX_INDIR_FIFO_CUT_THROUGH_THRESHOLD 0x3207 #define SUNI1x10GEXP_REG_EFLX_FIFO_OVERFLOW_ERROR_ENABLE 0x320C #define SUNI1x10GEXP_REG_EFLX_FIFO_OVERFLOW_ERROR_INDICATION 0x320D +#define SUNI1x10GEXP_REG_EFLX_CHANNEL_PROVISION 0x3210 + +#define SUNI1x10GEXP_REG_PL4IDU_CONFIG 0x3280 #define SUNI1x10GEXP_REG_PL4IDU_INTERRUPT_MASK 0x3282 #define SUNI1x10GEXP_REG_PL4IDU_INTERRUPT 0x3283 + +/*----------------------------------------*/ +#define SUNI1x10GEXP_REG_MAX_OFFSET 0x3480 + /******************************************************************************/ /* -- End register offset definitions -- */ /******************************************************************************/ @@ -127,6 +514,81 @@ /** SUNI-1x10GE-XP REGISTER BIT MASKS **/ /******************************************************************************/ +#define SUNI1x10GEXP_BITMSK_BITS_1 0x00001 +#define SUNI1x10GEXP_BITMSK_BITS_2 0x00003 +#define SUNI1x10GEXP_BITMSK_BITS_3 0x00007 +#define SUNI1x10GEXP_BITMSK_BITS_4 0x0000f +#define SUNI1x10GEXP_BITMSK_BITS_5 0x0001f +#define SUNI1x10GEXP_BITMSK_BITS_6 0x0003f +#define SUNI1x10GEXP_BITMSK_BITS_7 0x0007f +#define SUNI1x10GEXP_BITMSK_BITS_8 0x000ff +#define SUNI1x10GEXP_BITMSK_BITS_9 0x001ff +#define SUNI1x10GEXP_BITMSK_BITS_10 0x003ff +#define SUNI1x10GEXP_BITMSK_BITS_11 0x007ff +#define SUNI1x10GEXP_BITMSK_BITS_12 0x00fff +#define SUNI1x10GEXP_BITMSK_BITS_13 0x01fff +#define SUNI1x10GEXP_BITMSK_BITS_14 0x03fff +#define SUNI1x10GEXP_BITMSK_BITS_15 0x07fff +#define SUNI1x10GEXP_BITMSK_BITS_16 0x0ffff + +#define mSUNI1x10GEXP_CLR_MSBITS_1(v) ((v) & SUNI1x10GEXP_BITMSK_BITS_15) +#define mSUNI1x10GEXP_CLR_MSBITS_2(v) ((v) & SUNI1x10GEXP_BITMSK_BITS_14) +#define mSUNI1x10GEXP_CLR_MSBITS_3(v) ((v) & SUNI1x10GEXP_BITMSK_BITS_13) +#define mSUNI1x10GEXP_CLR_MSBITS_4(v) ((v) & SUNI1x10GEXP_BITMSK_BITS_12) +#define mSUNI1x10GEXP_CLR_MSBITS_5(v) ((v) & SUNI1x10GEXP_BITMSK_BITS_11) +#define mSUNI1x10GEXP_CLR_MSBITS_6(v) ((v) & SUNI1x10GEXP_BITMSK_BITS_10) +#define mSUNI1x10GEXP_CLR_MSBITS_7(v) ((v) & SUNI1x10GEXP_BITMSK_BITS_9) +#define mSUNI1x10GEXP_CLR_MSBITS_8(v) ((v) & SUNI1x10GEXP_BITMSK_BITS_8) +#define mSUNI1x10GEXP_CLR_MSBITS_9(v) ((v) & SUNI1x10GEXP_BITMSK_BITS_7) +#define mSUNI1x10GEXP_CLR_MSBITS_10(v) ((v) & SUNI1x10GEXP_BITMSK_BITS_6) +#define mSUNI1x10GEXP_CLR_MSBITS_11(v) ((v) & SUNI1x10GEXP_BITMSK_BITS_5) +#define mSUNI1x10GEXP_CLR_MSBITS_12(v) ((v) & SUNI1x10GEXP_BITMSK_BITS_4) +#define mSUNI1x10GEXP_CLR_MSBITS_13(v) ((v) & SUNI1x10GEXP_BITMSK_BITS_3) +#define mSUNI1x10GEXP_CLR_MSBITS_14(v) ((v) & SUNI1x10GEXP_BITMSK_BITS_2) +#define mSUNI1x10GEXP_CLR_MSBITS_15(v) ((v) & SUNI1x10GEXP_BITMSK_BITS_1) + +#define mSUNI1x10GEXP_GET_BIT(val, bitMsk) (((val)&(bitMsk)) ? 1:0) + + + +/*---------------------------------------------------------------------------- + * Register 0x0001: S/UNI-1x10GE-XP Product Revision + * Bit 3-0 REVISION + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_REVISION 0x000F + +/*---------------------------------------------------------------------------- + * Register 0x0002: S/UNI-1x10GE-XP Configuration and Reset Control + * Bit 2 XAUI_ARESETB + * Bit 1 PL4_ARESETB + * Bit 0 DRESETB + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_XAUI_ARESET 0x0004 +#define SUNI1x10GEXP_BITMSK_PL4_ARESET 0x0002 +#define SUNI1x10GEXP_BITMSK_DRESETB 0x0001 + +/*---------------------------------------------------------------------------- + * Register 0x0003: S/UNI-1x10GE-XP Loop Back and Miscellaneous Control + * Bit 11 PL4IO_OUTCLKSEL + * Bit 9 SYSPCSLB + * Bit 8 LINEPCSLB + * Bit 7 MSTAT_BYPASS + * Bit 6 RXXG_BYPASS + * Bit 5 TXXG_BYPASS + * Bit 4 SOP_PAD_EN + * Bit 1 LOS_INV + * Bit 0 OVERRIDE_LOS + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_PL4IO_OUTCLKSEL 0x0800 +#define SUNI1x10GEXP_BITMSK_SYSPCSLB 0x0200 +#define SUNI1x10GEXP_BITMSK_LINEPCSLB 0x0100 +#define SUNI1x10GEXP_BITMSK_MSTAT_BYPASS 0x0080 +#define SUNI1x10GEXP_BITMSK_RXXG_BYPASS 0x0040 +#define SUNI1x10GEXP_BITMSK_TXXG_BYPASS 0x0020 +#define SUNI1x10GEXP_BITMSK_SOP_PAD_EN 0x0010 +#define SUNI1x10GEXP_BITMSK_LOS_INV 0x0002 +#define SUNI1x10GEXP_BITMSK_OVERRIDE_LOS 0x0001 + /*---------------------------------------------------------------------------- * Register 0x0004: S/UNI-1x10GE-XP Device Status * Bit 9 TOP_SXRA_EXPIRED @@ -141,7 +603,10 @@ * Bit 0 TOP_PL4_OUT_ROOL *----------------------------------------------------------------------------*/ #define SUNI1x10GEXP_BITMSK_TOP_SXRA_EXPIRED 0x0200 +#define SUNI1x10GEXP_BITMSK_TOP_MDIO_BUSY 0x0100 +#define SUNI1x10GEXP_BITMSK_TOP_DTRB 0x0080 #define SUNI1x10GEXP_BITMSK_TOP_EXPIRED 0x0040 +#define SUNI1x10GEXP_BITMSK_TOP_PAUSED 0x0020 #define SUNI1x10GEXP_BITMSK_TOP_PL4_ID_DOOL 0x0010 #define SUNI1x10GEXP_BITMSK_TOP_PL4_IS_DOOL 0x0008 #define SUNI1x10GEXP_BITMSK_TOP_PL4_ID_ROOL 0x0004 @@ -149,12 +614,219 @@ #define SUNI1x10GEXP_BITMSK_TOP_PL4_OUT_ROOL 0x0001 /*---------------------------------------------------------------------------- + * Register 0x0005: Global Performance Update and Clock Monitors + * Bit 15 TIP + * Bit 8 XAUI_REF_CLKA + * Bit 7 RXLANE3CLKA + * Bit 6 RXLANE2CLKA + * Bit 5 RXLANE1CLKA + * Bit 4 RXLANE0CLKA + * Bit 3 CSUCLKA + * Bit 2 TDCLKA + * Bit 1 RSCLKA + * Bit 0 RDCLKA + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_TIP 0x8000 +#define SUNI1x10GEXP_BITMSK_XAUI_REF_CLKA 0x0100 +#define SUNI1x10GEXP_BITMSK_RXLANE3CLKA 0x0080 +#define SUNI1x10GEXP_BITMSK_RXLANE2CLKA 0x0040 +#define SUNI1x10GEXP_BITMSK_RXLANE1CLKA 0x0020 +#define SUNI1x10GEXP_BITMSK_RXLANE0CLKA 0x0010 +#define SUNI1x10GEXP_BITMSK_CSUCLKA 0x0008 +#define SUNI1x10GEXP_BITMSK_TDCLKA 0x0004 +#define SUNI1x10GEXP_BITMSK_RSCLKA 0x0002 +#define SUNI1x10GEXP_BITMSK_RDCLKA 0x0001 + +/*---------------------------------------------------------------------------- + * Register 0x0006: MDIO Command + * Bit 4 MDIO_RDINC + * Bit 3 MDIO_RSTAT + * Bit 2 MDIO_LCTLD + * Bit 1 MDIO_LCTLA + * Bit 0 MDIO_SPRE + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_MDIO_RDINC 0x0010 +#define SUNI1x10GEXP_BITMSK_MDIO_RSTAT 0x0008 +#define SUNI1x10GEXP_BITMSK_MDIO_LCTLD 0x0004 +#define SUNI1x10GEXP_BITMSK_MDIO_LCTLA 0x0002 +#define SUNI1x10GEXP_BITMSK_MDIO_SPRE 0x0001 + +/*---------------------------------------------------------------------------- + * Register 0x0007: MDIO Interrupt Enable + * Bit 0 MDIO_BUSY_EN + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_MDIO_BUSY_EN 0x0001 + +/*---------------------------------------------------------------------------- + * Register 0x0008: MDIO Interrupt Status + * Bit 0 MDIO_BUSYI + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_MDIO_BUSYI 0x0001 + +/*---------------------------------------------------------------------------- + * Register 0x0009: MMD PHY Address + * Bit 12-8 MDIO_DEVADR + * Bit 4-0 MDIO_PRTADR + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_MDIO_DEVADR 0x1F00 +#define SUNI1x10GEXP_BITOFF_MDIO_DEVADR 8 +#define SUNI1x10GEXP_BITMSK_MDIO_PRTADR 0x001F +#define SUNI1x10GEXP_BITOFF_MDIO_PRTADR 0 + +/*---------------------------------------------------------------------------- + * Register 0x000C: OAM Interface Control + * Bit 6 MDO_OD_ENB + * Bit 5 MDI_INV + * Bit 4 MDI_SEL + * Bit 3 RXOAMEN + * Bit 2 RXOAMCLKEN + * Bit 1 TXOAMEN + * Bit 0 TXOAMCLKEN + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_MDO_OD_ENB 0x0040 +#define SUNI1x10GEXP_BITMSK_MDI_INV 0x0020 +#define SUNI1x10GEXP_BITMSK_MDI_SEL 0x0010 +#define SUNI1x10GEXP_BITMSK_RXOAMEN 0x0008 +#define SUNI1x10GEXP_BITMSK_RXOAMCLKEN 0x0004 +#define SUNI1x10GEXP_BITMSK_TXOAMEN 0x0002 +#define SUNI1x10GEXP_BITMSK_TXOAMCLKEN 0x0001 + +/*---------------------------------------------------------------------------- + * Register 0x000D: S/UNI-1x10GE-XP Master Interrupt Status + * Bit 15 TOP_PL4IO_INT + * Bit 14 TOP_IRAM_INT + * Bit 13 TOP_ERAM_INT + * Bit 12 TOP_XAUI_INT + * Bit 11 TOP_MSTAT_INT + * Bit 10 TOP_RXXG_INT + * Bit 9 TOP_TXXG_INT + * Bit 8 TOP_XRF_INT + * Bit 7 TOP_XTEF_INT + * Bit 6 TOP_MDIO_BUSY_INT + * Bit 5 TOP_RXOAM_INT + * Bit 4 TOP_TXOAM_INT + * Bit 3 TOP_IFLX_INT + * Bit 2 TOP_EFLX_INT + * Bit 1 TOP_PL4ODP_INT + * Bit 0 TOP_PL4IDU_INT + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_TOP_PL4IO_INT 0x8000 +#define SUNI1x10GEXP_BITMSK_TOP_IRAM_INT 0x4000 +#define SUNI1x10GEXP_BITMSK_TOP_ERAM_INT 0x2000 +#define SUNI1x10GEXP_BITMSK_TOP_XAUI_INT 0x1000 +#define SUNI1x10GEXP_BITMSK_TOP_MSTAT_INT 0x0800 +#define SUNI1x10GEXP_BITMSK_TOP_RXXG_INT 0x0400 +#define SUNI1x10GEXP_BITMSK_TOP_TXXG_INT 0x0200 +#define SUNI1x10GEXP_BITMSK_TOP_XRF_INT 0x0100 +#define SUNI1x10GEXP_BITMSK_TOP_XTEF_INT 0x0080 +#define SUNI1x10GEXP_BITMSK_TOP_MDIO_BUSY_INT 0x0040 +#define SUNI1x10GEXP_BITMSK_TOP_RXOAM_INT 0x0020 +#define SUNI1x10GEXP_BITMSK_TOP_TXOAM_INT 0x0010 +#define SUNI1x10GEXP_BITMSK_TOP_IFLX_INT 0x0008 +#define SUNI1x10GEXP_BITMSK_TOP_EFLX_INT 0x0004 +#define SUNI1x10GEXP_BITMSK_TOP_PL4ODP_INT 0x0002 +#define SUNI1x10GEXP_BITMSK_TOP_PL4IDU_INT 0x0001 + +/*---------------------------------------------------------------------------- * Register 0x000E:PM3393 Global interrupt enable * Bit 15 TOP_INTE *----------------------------------------------------------------------------*/ #define SUNI1x10GEXP_BITMSK_TOP_INTE 0x8000 /*---------------------------------------------------------------------------- + * Register 0x0010: XTEF Miscellaneous Control + * Bit 7 RF_VAL + * Bit 6 RF_OVERRIDE + * Bit 5 LF_VAL + * Bit 4 LF_OVERRIDE + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_RF_VAL 0x0080 +#define SUNI1x10GEXP_BITMSK_RF_OVERRIDE 0x0040 +#define SUNI1x10GEXP_BITMSK_LF_VAL 0x0020 +#define SUNI1x10GEXP_BITMSK_LF_OVERRIDE 0x0010 +#define SUNI1x10GEXP_BITMSK_LFRF_OVERRIDE_VAL 0x00F0 + +/*---------------------------------------------------------------------------- + * Register 0x0011: XRF Miscellaneous Control + * Bit 6-4 EN_IDLE_REP + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_EN_IDLE_REP 0x0070 + +/*---------------------------------------------------------------------------- + * Register 0x0100: SERDES 3125 Configuration Register 1 + * Bit 10 RXEQB_3 + * Bit 8 RXEQB_2 + * Bit 6 RXEQB_1 + * Bit 4 RXEQB_0 + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_RXEQB 0x0FF0 +#define SUNI1x10GEXP_BITOFF_RXEQB_3 10 +#define SUNI1x10GEXP_BITOFF_RXEQB_2 8 +#define SUNI1x10GEXP_BITOFF_RXEQB_1 6 +#define SUNI1x10GEXP_BITOFF_RXEQB_0 4 + +/*---------------------------------------------------------------------------- + * Register 0x0101: SERDES 3125 Configuration Register 2 + * Bit 12 YSEL + * Bit 7 PRE_EMPH_3 + * Bit 6 PRE_EMPH_2 + * Bit 5 PRE_EMPH_1 + * Bit 4 PRE_EMPH_0 + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_YSEL 0x1000 +#define SUNI1x10GEXP_BITMSK_PRE_EMPH 0x00F0 +#define SUNI1x10GEXP_BITMSK_PRE_EMPH_3 0x0080 +#define SUNI1x10GEXP_BITMSK_PRE_EMPH_2 0x0040 +#define SUNI1x10GEXP_BITMSK_PRE_EMPH_1 0x0020 +#define SUNI1x10GEXP_BITMSK_PRE_EMPH_0 0x0010 + +/*---------------------------------------------------------------------------- + * Register 0x0102: SERDES 3125 Interrupt Enable Register + * Bit 3 LASIE + * Bit 2 SPLL_RAE + * Bit 1 MPLL_RAE + * Bit 0 PLL_LOCKE + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_LASIE 0x0008 +#define SUNI1x10GEXP_BITMSK_SPLL_RAE 0x0004 +#define SUNI1x10GEXP_BITMSK_MPLL_RAE 0x0002 +#define SUNI1x10GEXP_BITMSK_PLL_LOCKE 0x0001 + +/*---------------------------------------------------------------------------- + * Register 0x0103: SERDES 3125 Interrupt Visibility Register + * Bit 3 LASIV + * Bit 2 SPLL_RAV + * Bit 1 MPLL_RAV + * Bit 0 PLL_LOCKV + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_LASIV 0x0008 +#define SUNI1x10GEXP_BITMSK_SPLL_RAV 0x0004 +#define SUNI1x10GEXP_BITMSK_MPLL_RAV 0x0002 +#define SUNI1x10GEXP_BITMSK_PLL_LOCKV 0x0001 + +/*---------------------------------------------------------------------------- + * Register 0x0104: SERDES 3125 Interrupt Status Register + * Bit 3 LASII + * Bit 2 SPLL_RAI + * Bit 1 MPLL_RAI + * Bit 0 PLL_LOCKI + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_LASII 0x0008 +#define SUNI1x10GEXP_BITMSK_SPLL_RAI 0x0004 +#define SUNI1x10GEXP_BITMSK_MPLL_RAI 0x0002 +#define SUNI1x10GEXP_BITMSK_PLL_LOCKI 0x0001 + +/*---------------------------------------------------------------------------- + * Register 0x0107: SERDES 3125 Test Configuration + * Bit 12 DUALTX + * Bit 10 HC_1 + * Bit 9 HC_0 + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_DUALTX 0x1000 +#define SUNI1x10GEXP_BITMSK_HC 0x0600 +#define SUNI1x10GEXP_BITOFF_HC_0 9 + +/*---------------------------------------------------------------------------- * Register 0x2040: RXXG Configuration 1 * Bit 15 RXXG_RXEN * Bit 14 RXXG_ROCF @@ -168,11 +840,84 @@ * Bit 2-0 RXXG_MIFG *----------------------------------------------------------------------------*/ #define SUNI1x10GEXP_BITMSK_RXXG_RXEN 0x8000 +#define SUNI1x10GEXP_BITMSK_RXXG_ROCF 0x4000 +#define SUNI1x10GEXP_BITMSK_RXXG_PAD_STRIP 0x2000 #define SUNI1x10GEXP_BITMSK_RXXG_PUREP 0x0400 +#define SUNI1x10GEXP_BITMSK_RXXG_LONGP 0x0200 +#define SUNI1x10GEXP_BITMSK_RXXG_PARF 0x0100 #define SUNI1x10GEXP_BITMSK_RXXG_FLCHK 0x0080 +#define SUNI1x10GEXP_BITMSK_RXXG_PASS_CTRL 0x0020 #define SUNI1x10GEXP_BITMSK_RXXG_CRC_STRIP 0x0008 /*---------------------------------------------------------------------------- + * Register 0x02041: RXXG Configuration 2 + * Bit 7-0 RXXG_HDRSIZE + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_RXXG_HDRSIZE 0x00FF + +/*---------------------------------------------------------------------------- + * Register 0x2042: RXXG Configuration 3 + * Bit 15 RXXG_MIN_LERRE + * Bit 14 RXXG_MAX_LERRE + * Bit 12 RXXG_LINE_ERRE + * Bit 10 RXXG_RX_OVRE + * Bit 9 RXXG_ADR_FILTERE + * Bit 8 RXXG_ERR_FILTERE + * Bit 5 RXXG_PRMB_ERRE + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_RXXG_MIN_LERRE 0x8000 +#define SUNI1x10GEXP_BITMSK_RXXG_MAX_LERRE 0x4000 +#define SUNI1x10GEXP_BITMSK_RXXG_LINE_ERRE 0x1000 +#define SUNI1x10GEXP_BITMSK_RXXG_RX_OVRE 0x0400 +#define SUNI1x10GEXP_BITMSK_RXXG_ADR_FILTERE 0x0200 +#define SUNI1x10GEXP_BITMSK_RXXG_ERR_FILTERRE 0x0100 +#define SUNI1x10GEXP_BITMSK_RXXG_PRMB_ERRE 0x0020 + +/*---------------------------------------------------------------------------- + * Register 0x2043: RXXG Interrupt + * Bit 15 RXXG_MIN_LERRI + * Bit 14 RXXG_MAX_LERRI + * Bit 12 RXXG_LINE_ERRI + * Bit 10 RXXG_RX_OVRI + * Bit 9 RXXG_ADR_FILTERI + * Bit 8 RXXG_ERR_FILTERI + * Bit 5 RXXG_PRMB_ERRE + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_RXXG_MIN_LERRI 0x8000 +#define SUNI1x10GEXP_BITMSK_RXXG_MAX_LERRI 0x4000 +#define SUNI1x10GEXP_BITMSK_RXXG_LINE_ERRI 0x1000 +#define SUNI1x10GEXP_BITMSK_RXXG_RX_OVRI 0x0400 +#define SUNI1x10GEXP_BITMSK_RXXG_ADR_FILTERI 0x0200 +#define SUNI1x10GEXP_BITMSK_RXXG_ERR_FILTERI 0x0100 +#define SUNI1x10GEXP_BITMSK_RXXG_PRMB_ERRE 0x0020 + +/*---------------------------------------------------------------------------- + * Register 0x2049: RXXG Receive FIFO Threshold + * Bit 2-0 RXXG_CUT_THRU + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_RXXG_CUT_THRU 0x0007 +#define SUNI1x10GEXP_BITOFF_RXXG_CUT_THRU 0 + +/*---------------------------------------------------------------------------- + * Register 0x2062H - 0x2069: RXXG Exact Match VID + * Bit 11-0 RXXG_VID_MATCH + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_RXXG_VID_MATCH 0x0FFF +#define SUNI1x10GEXP_BITOFF_RXXG_VID_MATCH 0 + +/*---------------------------------------------------------------------------- + * Register 0x206EH - 0x206F: RXXG Address Filter Control + * Bit 3 RXXG_FORWARD_ENABLE + * Bit 2 RXXG_VLAN_ENABLE + * Bit 1 RXXG_SRC_ADDR + * Bit 0 RXXG_MATCH_ENABLE + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_RXXG_FORWARD_ENABLE 0x0008 +#define SUNI1x10GEXP_BITMSK_RXXG_VLAN_ENABLE 0x0004 +#define SUNI1x10GEXP_BITMSK_RXXG_SRC_ADDR 0x0002 +#define SUNI1x10GEXP_BITMSK_RXXG_MATCH_ENABLE 0x0001 + +/*---------------------------------------------------------------------------- * Register 0x2070: RXXG Address Filter Control 2 * Bit 1 RXXG_PMODE * Bit 0 RXXG_MHASH_EN @@ -181,15 +926,446 @@ #define SUNI1x10GEXP_BITMSK_RXXG_MHASH_EN 0x0001 /*---------------------------------------------------------------------------- + * Register 0x2081: XRF Control Register 2 + * Bit 6 EN_PKT_GEN + * Bit 4-2 PATT + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_EN_PKT_GEN 0x0040 +#define SUNI1x10GEXP_BITMSK_PATT 0x001C +#define SUNI1x10GEXP_BITOFF_PATT 2 + +/*---------------------------------------------------------------------------- + * Register 0x2088: XRF Interrupt Enable + * Bit 12-9 LANE_HICERE + * Bit 8-5 HS_SD_LANEE + * Bit 4 ALIGN_STATUS_ERRE + * Bit 3-0 LANE_SYNC_STAT_ERRE + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_LANE_HICERE 0x1E00 +#define SUNI1x10GEXP_BITOFF_LANE_HICERE 9 +#define SUNI1x10GEXP_BITMSK_HS_SD_LANEE 0x01E0 +#define SUNI1x10GEXP_BITOFF_HS_SD_LANEE 5 +#define SUNI1x10GEXP_BITMSK_ALIGN_STATUS_ERRE 0x0010 +#define SUNI1x10GEXP_BITMSK_LANE_SYNC_STAT_ERRE 0x000F +#define SUNI1x10GEXP_BITOFF_LANE_SYNC_STAT_ERRE 0 + +/*---------------------------------------------------------------------------- + * Register 0x2089: XRF Interrupt Status + * Bit 12-9 LANE_HICERI + * Bit 8-5 HS_SD_LANEI + * Bit 4 ALIGN_STATUS_ERRI + * Bit 3-0 LANE_SYNC_STAT_ERRI + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_LANE_HICERI 0x1E00 +#define SUNI1x10GEXP_BITOFF_LANE_HICERI 9 +#define SUNI1x10GEXP_BITMSK_HS_SD_LANEI 0x01E0 +#define SUNI1x10GEXP_BITOFF_HS_SD_LANEI 5 +#define SUNI1x10GEXP_BITMSK_ALIGN_STATUS_ERRI 0x0010 +#define SUNI1x10GEXP_BITMSK_LANE_SYNC_STAT_ERRI 0x000F +#define SUNI1x10GEXP_BITOFF_LANE_SYNC_STAT_ERRI 0 + +/*---------------------------------------------------------------------------- + * Register 0x208A: XRF Error Status + * Bit 8-5 HS_SD_LANE + * Bit 4 ALIGN_STATUS_ERR + * Bit 3-0 LANE_SYNC_STAT_ERR + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_HS_SD_LANE3 0x0100 +#define SUNI1x10GEXP_BITMSK_HS_SD_LANE2 0x0080 +#define SUNI1x10GEXP_BITMSK_HS_SD_LANE1 0x0040 +#define SUNI1x10GEXP_BITMSK_HS_SD_LANE0 0x0020 +#define SUNI1x10GEXP_BITMSK_ALIGN_STATUS_ERR 0x0010 +#define SUNI1x10GEXP_BITMSK_LANE3_SYNC_STAT_ERR 0x0008 +#define SUNI1x10GEXP_BITMSK_LANE2_SYNC_STAT_ERR 0x0004 +#define SUNI1x10GEXP_BITMSK_LANE1_SYNC_STAT_ERR 0x0002 +#define SUNI1x10GEXP_BITMSK_LANE0_SYNC_STAT_ERR 0x0001 + +/*---------------------------------------------------------------------------- + * Register 0x208B: XRF Diagnostic Interrupt Enable + * Bit 7-4 LANE_OVERRUNE + * Bit 3-0 LANE_UNDERRUNE + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_LANE_OVERRUNE 0x00F0 +#define SUNI1x10GEXP_BITOFF_LANE_OVERRUNE 4 +#define SUNI1x10GEXP_BITMSK_LANE_UNDERRUNE 0x000F +#define SUNI1x10GEXP_BITOFF_LANE_UNDERRUNE 0 + +/*---------------------------------------------------------------------------- + * Register 0x208C: XRF Diagnostic Interrupt Status + * Bit 7-4 LANE_OVERRUNI + * Bit 3-0 LANE_UNDERRUNI + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_LANE_OVERRUNI 0x00F0 +#define SUNI1x10GEXP_BITOFF_LANE_OVERRUNI 4 +#define SUNI1x10GEXP_BITMSK_LANE_UNDERRUNI 0x000F +#define SUNI1x10GEXP_BITOFF_LANE_UNDERRUNI 0 + +/*---------------------------------------------------------------------------- + * Register 0x20C0: RXOAM Configuration + * Bit 15 RXOAM_BUSY + * Bit 14-12 RXOAM_F2_SEL + * Bit 10-8 RXOAM_F1_SEL + * Bit 7-6 RXOAM_FILTER_CTRL + * Bit 5-0 RXOAM_PX_EN + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_RXOAM_BUSY 0x8000 +#define SUNI1x10GEXP_BITMSK_RXOAM_F2_SEL 0x7000 +#define SUNI1x10GEXP_BITOFF_RXOAM_F2_SEL 12 +#define SUNI1x10GEXP_BITMSK_RXOAM_F1_SEL 0x0700 +#define SUNI1x10GEXP_BITOFF_RXOAM_F1_SEL 8 +#define SUNI1x10GEXP_BITMSK_RXOAM_FILTER_CTRL 0x00C0 +#define SUNI1x10GEXP_BITOFF_RXOAM_FILTER_CTRL 6 +#define SUNI1x10GEXP_BITMSK_RXOAM_PX_EN 0x003F +#define SUNI1x10GEXP_BITOFF_RXOAM_PX_EN 0 + +/*---------------------------------------------------------------------------- + * Register 0x20C1,0x20C2: RXOAM Filter Configuration + * Bit 15-8 RXOAM_FX_MASK + * Bit 7-0 RXOAM_FX_VAL + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_RXOAM_FX_MASK 0xFF00 +#define SUNI1x10GEXP_BITOFF_RXOAM_FX_MASK 8 +#define SUNI1x10GEXP_BITMSK_RXOAM_FX_VAL 0x00FF +#define SUNI1x10GEXP_BITOFF_RXOAM_FX_VAl 0 + +/*---------------------------------------------------------------------------- + * Register 0x20C3: RXOAM Configuration Register 2 + * Bit 13 RXOAM_REC_BYTE_VAL + * Bit 11-10 RXOAM_BYPASS_MODE + * Bit 5-0 RXOAM_PX_CLEAR + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_RXOAM_REC_BYTE_VAL 0x2000 +#define SUNI1x10GEXP_BITMSK_RXOAM_BYPASS_MODE 0x0C00 +#define SUNI1x10GEXP_BITOFF_RXOAM_BYPASS_MODE 10 +#define SUNI1x10GEXP_BITMSK_RXOAM_PX_CLEAR 0x003F +#define SUNI1x10GEXP_BITOFF_RXOAM_PX_CLEAR 0 + +/*---------------------------------------------------------------------------- + * Register 0x20C4: RXOAM HEC Configuration + * Bit 15-8 RXOAM_COSET + * Bit 2 RXOAM_HEC_ERR_PKT + * Bit 0 RXOAM_HEC_EN + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_RXOAM_COSET 0xFF00 +#define SUNI1x10GEXP_BITOFF_RXOAM_COSET 8 +#define SUNI1x10GEXP_BITMSK_RXOAM_HEC_ERR_PKT 0x0004 +#define SUNI1x10GEXP_BITMSK_RXOAM_HEC_EN 0x0001 + +/*---------------------------------------------------------------------------- + * Register 0x20C7: RXOAM Interrupt Enable + * Bit 10 RXOAM_FILTER_THRSHE + * Bit 9 RXOAM_OAM_ERRE + * Bit 8 RXOAM_HECE_THRSHE + * Bit 7 RXOAM_SOPE + * Bit 6 RXOAM_RFE + * Bit 5 RXOAM_LFE + * Bit 4 RXOAM_DV_ERRE + * Bit 3 RXOAM_DATA_INVALIDE + * Bit 2 RXOAM_FILTER_DROPE + * Bit 1 RXOAM_HECE + * Bit 0 RXOAM_OFLE + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_RXOAM_FILTER_THRSHE 0x0400 +#define SUNI1x10GEXP_BITMSK_RXOAM_OAM_ERRE 0x0200 +#define SUNI1x10GEXP_BITMSK_RXOAM_HECE_THRSHE 0x0100 +#define SUNI1x10GEXP_BITMSK_RXOAM_SOPE 0x0080 +#define SUNI1x10GEXP_BITMSK_RXOAM_RFE 0x0040 +#define SUNI1x10GEXP_BITMSK_RXOAM_LFE 0x0020 +#define SUNI1x10GEXP_BITMSK_RXOAM_DV_ERRE 0x0010 +#define SUNI1x10GEXP_BITMSK_RXOAM_DATA_INVALIDE 0x0008 +#define SUNI1x10GEXP_BITMSK_RXOAM_FILTER_DROPE 0x0004 +#define SUNI1x10GEXP_BITMSK_RXOAM_HECE 0x0002 +#define SUNI1x10GEXP_BITMSK_RXOAM_OFLE 0x0001 + +/*---------------------------------------------------------------------------- + * Register 0x20C8: RXOAM Interrupt Status + * Bit 10 RXOAM_FILTER_THRSHI + * Bit 9 RXOAM_OAM_ERRI + * Bit 8 RXOAM_HECE_THRSHI + * Bit 7 RXOAM_SOPI + * Bit 6 RXOAM_RFI + * Bit 5 RXOAM_LFI + * Bit 4 RXOAM_DV_ERRI + * Bit 3 RXOAM_DATA_INVALIDI + * Bit 2 RXOAM_FILTER_DROPI + * Bit 1 RXOAM_HECI + * Bit 0 RXOAM_OFLI + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_RXOAM_FILTER_THRSHI 0x0400 +#define SUNI1x10GEXP_BITMSK_RXOAM_OAM_ERRI 0x0200 +#define SUNI1x10GEXP_BITMSK_RXOAM_HECE_THRSHI 0x0100 +#define SUNI1x10GEXP_BITMSK_RXOAM_SOPI 0x0080 +#define SUNI1x10GEXP_BITMSK_RXOAM_RFI 0x0040 +#define SUNI1x10GEXP_BITMSK_RXOAM_LFI 0x0020 +#define SUNI1x10GEXP_BITMSK_RXOAM_DV_ERRI 0x0010 +#define SUNI1x10GEXP_BITMSK_RXOAM_DATA_INVALIDI 0x0008 +#define SUNI1x10GEXP_BITMSK_RXOAM_FILTER_DROPI 0x0004 +#define SUNI1x10GEXP_BITMSK_RXOAM_HECI 0x0002 +#define SUNI1x10GEXP_BITMSK_RXOAM_OFLI 0x0001 + +/*---------------------------------------------------------------------------- + * Register 0x20C9: RXOAM Status + * Bit 10 RXOAM_FILTER_THRSHV + * Bit 8 RXOAM_HECE_THRSHV + * Bit 6 RXOAM_RFV + * Bit 5 RXOAM_LFV + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_RXOAM_FILTER_THRSHV 0x0400 +#define SUNI1x10GEXP_BITMSK_RXOAM_HECE_THRSHV 0x0100 +#define SUNI1x10GEXP_BITMSK_RXOAM_RFV 0x0040 +#define SUNI1x10GEXP_BITMSK_RXOAM_LFV 0x0020 + +/*---------------------------------------------------------------------------- * Register 0x2100: MSTAT Control * Bit 2 MSTAT_WRITE * Bit 1 MSTAT_CLEAR * Bit 0 MSTAT_SNAP *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_MSTAT_WRITE 0x0004 #define SUNI1x10GEXP_BITMSK_MSTAT_CLEAR 0x0002 #define SUNI1x10GEXP_BITMSK_MSTAT_SNAP 0x0001 /*---------------------------------------------------------------------------- + * Register 0x2109: MSTAT Counter Write Address + * Bit 5-0 MSTAT_WRITE_ADDRESS + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_MSTAT_WRITE_ADDRESS 0x003F +#define SUNI1x10GEXP_BITOFF_MSTAT_WRITE_ADDRESS 0 + +/*---------------------------------------------------------------------------- + * Register 0x2200: IFLX Global Configuration Register + * Bit 15 IFLX_IRCU_ENABLE + * Bit 14 IFLX_IDSWT_ENABLE + * Bit 13-0 IFLX_IFD_CNT + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_IFLX_IRCU_ENABLE 0x8000 +#define SUNI1x10GEXP_BITMSK_IFLX_IDSWT_ENABLE 0x4000 +#define SUNI1x10GEXP_BITMSK_IFLX_IFD_CNT 0x3FFF +#define SUNI1x10GEXP_BITOFF_IFLX_IFD_CNT 0 + +/*---------------------------------------------------------------------------- + * Register 0x2209: IFLX FIFO Overflow Enable + * Bit 0 IFLX_OVFE + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_IFLX_OVFE 0x0001 + +/*---------------------------------------------------------------------------- + * Register 0x220A: IFLX FIFO Overflow Interrupt + * Bit 0 IFLX_OVFI + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_IFLX_OVFI 0x0001 + +/*---------------------------------------------------------------------------- + * Register 0x220D: IFLX Indirect Channel Address + * Bit 15 IFLX_BUSY + * Bit 14 IFLX_RWB + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_IFLX_BUSY 0x8000 +#define SUNI1x10GEXP_BITMSK_IFLX_RWB 0x4000 + +/*---------------------------------------------------------------------------- + * Register 0x220E: IFLX Indirect Logical FIFO Low Limit & Provision + * Bit 9-0 IFLX_LOLIM + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_IFLX_LOLIM 0x03FF +#define SUNI1x10GEXP_BITOFF_IFLX_LOLIM 0 + +/*---------------------------------------------------------------------------- + * Register 0x220F: IFLX Indirect Logical FIFO High Limit + * Bit 9-0 IFLX_HILIM + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_IFLX_HILIM 0x03FF +#define SUNI1x10GEXP_BITOFF_IFLX_HILIM 0 + +/*---------------------------------------------------------------------------- + * Register 0x2210: IFLX Indirect Full/Almost Full Status & Limit + * Bit 15 IFLX_FULL + * Bit 14 IFLX_AFULL + * Bit 13-0 IFLX_AFTH + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_IFLX_FULL 0x8000 +#define SUNI1x10GEXP_BITMSK_IFLX_AFULL 0x4000 +#define SUNI1x10GEXP_BITMSK_IFLX_AFTH 0x3FFF +#define SUNI1x10GEXP_BITOFF_IFLX_AFTH 0 + +/*---------------------------------------------------------------------------- + * Register 0x2211: IFLX Indirect Empty/Almost Empty Status & Limit + * Bit 15 IFLX_EMPTY + * Bit 14 IFLX_AEMPTY + * Bit 13-0 IFLX_AETH + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_IFLX_EMPTY 0x8000 +#define SUNI1x10GEXP_BITMSK_IFLX_AEMPTY 0x4000 +#define SUNI1x10GEXP_BITMSK_IFLX_AETH 0x3FFF +#define SUNI1x10GEXP_BITOFF_IFLX_AETH 0 + +/*---------------------------------------------------------------------------- + * Register 0x2240: PL4MOS Configuration Register + * Bit 3 PL4MOS_RE_INIT + * Bit 2 PL4MOS_EN + * Bit 1 PL4MOS_NO_STATUS + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_PL4MOS_RE_INIT 0x0008 +#define SUNI1x10GEXP_BITMSK_PL4MOS_EN 0x0004 +#define SUNI1x10GEXP_BITMSK_PL4MOS_NO_STATUS 0x0002 + +/*---------------------------------------------------------------------------- + * Register 0x2243: PL4MOS MaxBurst1 Register + * Bit 11-0 PL4MOS_MAX_BURST1 + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_PL4MOS_MAX_BURST1 0x0FFF +#define SUNI1x10GEXP_BITOFF_PL4MOS_MAX_BURST1 0 + +/*---------------------------------------------------------------------------- + * Register 0x2244: PL4MOS MaxBurst2 Register + * Bit 11-0 PL4MOS_MAX_BURST2 + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_PL4MOS_MAX_BURST2 0x0FFF +#define SUNI1x10GEXP_BITOFF_PL4MOS_MAX_BURST2 0 + +/*---------------------------------------------------------------------------- + * Register 0x2245: PL4MOS Transfer Size Register + * Bit 7-0 PL4MOS_MAX_TRANSFER + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_PL4MOS_MAX_TRANSFER 0x00FF +#define SUNI1x10GEXP_BITOFF_PL4MOS_MAX_TRANSFER 0 + +/*---------------------------------------------------------------------------- + * Register 0x2280: PL4ODP Configuration + * Bit 15-12 PL4ODP_REPEAT_T + * Bit 8 PL4ODP_SOP_RULE + * Bit 1 PL4ODP_EN_PORTS + * Bit 0 PL4ODP_EN_DFWD + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_PL4ODP_REPEAT_T 0xF000 +#define SUNI1x10GEXP_BITOFF_PL4ODP_REPEAT_T 12 +#define SUNI1x10GEXP_BITMSK_PL4ODP_SOP_RULE 0x0100 +#define SUNI1x10GEXP_BITMSK_PL4ODP_EN_PORTS 0x0002 +#define SUNI1x10GEXP_BITMSK_PL4ODP_EN_DFWD 0x0001 + +/*---------------------------------------------------------------------------- + * Register 0x2282: PL4ODP Interrupt Mask + * Bit 0 PL4ODP_OUT_DISE + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_PL4ODP_OUT_DISE 0x0001 + + + +#define SUNI1x10GEXP_BITMSK_PL4ODP_PPE_EOPEOBE 0x0080 +#define SUNI1x10GEXP_BITMSK_PL4ODP_PPE_ERREOPE 0x0040 +#define SUNI1x10GEXP_BITMSK_PL4ODP_PPE_MEOPE 0x0008 +#define SUNI1x10GEXP_BITMSK_PL4ODP_PPE_MSOPE 0x0004 +#define SUNI1x10GEXP_BITMSK_PL4ODP_ES_OVRE 0x0002 + + +/*---------------------------------------------------------------------------- + * Register 0x2283: PL4ODP Interrupt + * Bit 0 PL4ODP_OUT_DISI + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_PL4ODP_OUT_DISI 0x0001 + + + +#define SUNI1x10GEXP_BITMSK_PL4ODP_PPE_EOPEOBI 0x0080 +#define SUNI1x10GEXP_BITMSK_PL4ODP_PPE_ERREOPI 0x0040 +#define SUNI1x10GEXP_BITMSK_PL4ODP_PPE_MEOPI 0x0008 +#define SUNI1x10GEXP_BITMSK_PL4ODP_PPE_MSOPI 0x0004 +#define SUNI1x10GEXP_BITMSK_PL4ODP_ES_OVRI 0x0002 + +/*---------------------------------------------------------------------------- + * Register 0x2300: PL4IO Lock Detect Status + * Bit 15 PL4IO_OUT_ROOLV + * Bit 12 PL4IO_IS_ROOLV + * Bit 11 PL4IO_DIP2_ERRV + * Bit 8 PL4IO_ID_ROOLV + * Bit 4 PL4IO_IS_DOOLV + * Bit 0 PL4IO_ID_DOOLV + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_PL4IO_OUT_ROOLV 0x8000 +#define SUNI1x10GEXP_BITMSK_PL4IO_IS_ROOLV 0x1000 +#define SUNI1x10GEXP_BITMSK_PL4IO_DIP2_ERRV 0x0800 +#define SUNI1x10GEXP_BITMSK_PL4IO_ID_ROOLV 0x0100 +#define SUNI1x10GEXP_BITMSK_PL4IO_IS_DOOLV 0x0010 +#define SUNI1x10GEXP_BITMSK_PL4IO_ID_DOOLV 0x0001 + +/*---------------------------------------------------------------------------- + * Register 0x2301: PL4IO Lock Detect Change + * Bit 15 PL4IO_OUT_ROOLI + * Bit 12 PL4IO_IS_ROOLI + * Bit 11 PL4IO_DIP2_ERRI + * Bit 8 PL4IO_ID_ROOLI + * Bit 4 PL4IO_IS_DOOLI + * Bit 0 PL4IO_ID_DOOLI + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_PL4IO_OUT_ROOLI 0x8000 +#define SUNI1x10GEXP_BITMSK_PL4IO_IS_ROOLI 0x1000 +#define SUNI1x10GEXP_BITMSK_PL4IO_DIP2_ERRI 0x0800 +#define SUNI1x10GEXP_BITMSK_PL4IO_ID_ROOLI 0x0100 +#define SUNI1x10GEXP_BITMSK_PL4IO_IS_DOOLI 0x0010 +#define SUNI1x10GEXP_BITMSK_PL4IO_ID_DOOLI 0x0001 + +/*---------------------------------------------------------------------------- + * Register 0x2302: PL4IO Lock Detect Mask + * Bit 15 PL4IO_OUT_ROOLE + * Bit 12 PL4IO_IS_ROOLE + * Bit 11 PL4IO_DIP2_ERRE + * Bit 8 PL4IO_ID_ROOLE + * Bit 4 PL4IO_IS_DOOLE + * Bit 0 PL4IO_ID_DOOLE + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_PL4IO_OUT_ROOLE 0x8000 +#define SUNI1x10GEXP_BITMSK_PL4IO_IS_ROOLE 0x1000 +#define SUNI1x10GEXP_BITMSK_PL4IO_DIP2_ERRE 0x0800 +#define SUNI1x10GEXP_BITMSK_PL4IO_ID_ROOLE 0x0100 +#define SUNI1x10GEXP_BITMSK_PL4IO_IS_DOOLE 0x0010 +#define SUNI1x10GEXP_BITMSK_PL4IO_ID_DOOLE 0x0001 + +/*---------------------------------------------------------------------------- + * Register 0x2303: PL4IO Lock Detect Limits + * Bit 15-8 PL4IO_REF_LIMIT + * Bit 7-0 PL4IO_TRAN_LIMIT + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_PL4IO_REF_LIMIT 0xFF00 +#define SUNI1x10GEXP_BITOFF_PL4IO_REF_LIMIT 8 +#define SUNI1x10GEXP_BITMSK_PL4IO_TRAN_LIMIT 0x00FF +#define SUNI1x10GEXP_BITOFF_PL4IO_TRAN_LIMIT 0 + +/*---------------------------------------------------------------------------- + * Register 0x2304: PL4IO Calendar Repetitions + * Bit 15-8 PL4IO_IN_MUL + * Bit 7-0 PL4IO_OUT_MUL + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_PL4IO_IN_MUL 0xFF00 +#define SUNI1x10GEXP_BITOFF_PL4IO_IN_MUL 8 +#define SUNI1x10GEXP_BITMSK_PL4IO_OUT_MUL 0x00FF +#define SUNI1x10GEXP_BITOFF_PL4IO_OUT_MUL 0 + +/*---------------------------------------------------------------------------- + * Register 0x2305: PL4IO Configuration + * Bit 15 PL4IO_DIP2_ERR_CHK + * Bit 11 PL4IO_ODAT_DIS + * Bit 10 PL4IO_TRAIN_DIS + * Bit 9 PL4IO_OSTAT_DIS + * Bit 8 PL4IO_ISTAT_DIS + * Bit 7 PL4IO_NO_ISTAT + * Bit 6 PL4IO_STAT_OUTSEL + * Bit 5 PL4IO_INSEL + * Bit 4 PL4IO_DLSEL + * Bit 1-0 PL4IO_OUTSEL + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_PL4IO_DIP2_ERR_CHK 0x8000 +#define SUNI1x10GEXP_BITMSK_PL4IO_ODAT_DIS 0x0800 +#define SUNI1x10GEXP_BITMSK_PL4IO_TRAIN_DIS 0x0400 +#define SUNI1x10GEXP_BITMSK_PL4IO_OSTAT_DIS 0x0200 +#define SUNI1x10GEXP_BITMSK_PL4IO_ISTAT_DIS 0x0100 +#define SUNI1x10GEXP_BITMSK_PL4IO_NO_ISTAT 0x0080 +#define SUNI1x10GEXP_BITMSK_PL4IO_STAT_OUTSEL 0x0040 +#define SUNI1x10GEXP_BITMSK_PL4IO_INSEL 0x0020 +#define SUNI1x10GEXP_BITMSK_PL4IO_DLSEL 0x0010 +#define SUNI1x10GEXP_BITMSK_PL4IO_OUTSEL 0x0003 +#define SUNI1x10GEXP_BITOFF_PL4IO_OUTSEL 0 + +/*---------------------------------------------------------------------------- * Register 0x3040: TXXG Configuration Register 1 * Bit 15 TXXG_TXEN0 * Bit 13 TXXG_HOSTPAUSE @@ -202,12 +1378,266 @@ * Bit 0 TXXG_SPRE *----------------------------------------------------------------------------*/ #define SUNI1x10GEXP_BITMSK_TXXG_TXEN0 0x8000 +#define SUNI1x10GEXP_BITMSK_TXXG_HOSTPAUSE 0x2000 +#define SUNI1x10GEXP_BITMSK_TXXG_IPGT 0x1F80 #define SUNI1x10GEXP_BITOFF_TXXG_IPGT 7 #define SUNI1x10GEXP_BITMSK_TXXG_32BIT_ALIGN 0x0020 #define SUNI1x10GEXP_BITMSK_TXXG_CRCEN 0x0010 #define SUNI1x10GEXP_BITMSK_TXXG_FCTX 0x0008 #define SUNI1x10GEXP_BITMSK_TXXG_FCRX 0x0004 #define SUNI1x10GEXP_BITMSK_TXXG_PADEN 0x0002 +#define SUNI1x10GEXP_BITMSK_TXXG_SPRE 0x0001 + +/*---------------------------------------------------------------------------- + * Register 0x3041: TXXG Configuration Register 2 + * Bit 7-0 TXXG_HDRSIZE + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_TXXG_HDRSIZE 0x00FF + +/*---------------------------------------------------------------------------- + * Register 0x3042: TXXG Configuration Register 3 + * Bit 15 TXXG_FIFO_ERRE + * Bit 14 TXXG_FIFO_UDRE + * Bit 13 TXXG_MAX_LERRE + * Bit 12 TXXG_MIN_LERRE + * Bit 11 TXXG_XFERE + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_TXXG_FIFO_ERRE 0x8000 +#define SUNI1x10GEXP_BITMSK_TXXG_FIFO_UDRE 0x4000 +#define SUNI1x10GEXP_BITMSK_TXXG_MAX_LERRE 0x2000 +#define SUNI1x10GEXP_BITMSK_TXXG_MIN_LERRE 0x1000 +#define SUNI1x10GEXP_BITMSK_TXXG_XFERE 0x0800 + +/*---------------------------------------------------------------------------- + * Register 0x3043: TXXG Interrupt + * Bit 15 TXXG_FIFO_ERRI + * Bit 14 TXXG_FIFO_UDRI + * Bit 13 TXXG_MAX_LERRI + * Bit 12 TXXG_MIN_LERRI + * Bit 11 TXXG_XFERI + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_TXXG_FIFO_ERRI 0x8000 +#define SUNI1x10GEXP_BITMSK_TXXG_FIFO_UDRI 0x4000 +#define SUNI1x10GEXP_BITMSK_TXXG_MAX_LERRI 0x2000 +#define SUNI1x10GEXP_BITMSK_TXXG_MIN_LERRI 0x1000 +#define SUNI1x10GEXP_BITMSK_TXXG_XFERI 0x0800 + +/*---------------------------------------------------------------------------- + * Register 0x3044: TXXG Status Register + * Bit 1 TXXG_TXACTIVE + * Bit 0 TXXG_PAUSED + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_TXXG_TXACTIVE 0x0002 +#define SUNI1x10GEXP_BITMSK_TXXG_PAUSED 0x0001 + +/*---------------------------------------------------------------------------- + * Register 0x3046: TXXG TX_MINFR - Transmit Min Frame Size Register + * Bit 7-0 TXXG_TX_MINFR + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_TXXG_TX_MINFR 0x00FF +#define SUNI1x10GEXP_BITOFF_TXXG_TX_MINFR 0 + +/*---------------------------------------------------------------------------- + * Register 0x3052: TXXG Pause Quantum Value Configuration Register + * Bit 7-0 TXXG_FC_PAUSE_QNTM + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_TXXG_FC_PAUSE_QNTM 0x00FF +#define SUNI1x10GEXP_BITOFF_TXXG_FC_PAUSE_QNTM 0 + +/*---------------------------------------------------------------------------- + * Register 0x3080: XTEF Control + * Bit 3-0 XTEF_FORCE_PARITY_ERR + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_XTEF_FORCE_PARITY_ERR 0x000F +#define SUNI1x10GEXP_BITOFF_XTEF_FORCE_PARITY_ERR 0 + +/*---------------------------------------------------------------------------- + * Register 0x3084: XTEF Interrupt Event Register + * Bit 0 XTEF_LOST_SYNCI + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_XTEF_LOST_SYNCI 0x0001 + +/*---------------------------------------------------------------------------- + * Register 0x3085: XTEF Interrupt Enable Register + * Bit 0 XTEF_LOST_SYNCE + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_XTEF_LOST_SYNCE 0x0001 + +/*---------------------------------------------------------------------------- + * Register 0x3086: XTEF Visibility Register + * Bit 0 XTEF_LOST_SYNCV + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_XTEF_LOST_SYNCV 0x0001 + +/*---------------------------------------------------------------------------- + * Register 0x30C0: TXOAM OAM Configuration + * Bit 15 TXOAM_HEC_EN + * Bit 14 TXOAM_EMPTYCODE_EN + * Bit 13 TXOAM_FORCE_IDLE + * Bit 12 TXOAM_IGNORE_IDLE + * Bit 11-6 TXOAM_PX_OVERWRITE + * Bit 5-0 TXOAM_PX_SEL + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_TXOAM_HEC_EN 0x8000 +#define SUNI1x10GEXP_BITMSK_TXOAM_EMPTYCODE_EN 0x4000 +#define SUNI1x10GEXP_BITMSK_TXOAM_FORCE_IDLE 0x2000 +#define SUNI1x10GEXP_BITMSK_TXOAM_IGNORE_IDLE 0x1000 +#define SUNI1x10GEXP_BITMSK_TXOAM_PX_OVERWRITE 0x0FC0 +#define SUNI1x10GEXP_BITOFF_TXOAM_PX_OVERWRITE 6 +#define SUNI1x10GEXP_BITMSK_TXOAM_PX_SEL 0x003F +#define SUNI1x10GEXP_BITOFF_TXOAM_PX_SEL 0 + +/*---------------------------------------------------------------------------- + * Register 0x30C1: TXOAM Mini-Packet Rate Configuration + * Bit 15 TXOAM_MINIDIS + * Bit 14 TXOAM_BUSY + * Bit 13 TXOAM_TRANS_EN + * Bit 10-0 TXOAM_MINIRATE + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_TXOAM_MINIDIS 0x8000 +#define SUNI1x10GEXP_BITMSK_TXOAM_BUSY 0x4000 +#define SUNI1x10GEXP_BITMSK_TXOAM_TRANS_EN 0x2000 +#define SUNI1x10GEXP_BITMSK_TXOAM_MINIRATE 0x07FF + +/*---------------------------------------------------------------------------- + * Register 0x30C2: TXOAM Mini-Packet Gap and FIFO Configuration + * Bit 13-10 TXOAM_FTHRESH + * Bit 9-6 TXOAM_MINIPOST + * Bit 5-0 TXOAM_MINIPRE + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_TXOAM_FTHRESH 0x3C00 +#define SUNI1x10GEXP_BITOFF_TXOAM_FTHRESH 10 +#define SUNI1x10GEXP_BITMSK_TXOAM_MINIPOST 0x03C0 +#define SUNI1x10GEXP_BITOFF_TXOAM_MINIPOST 6 +#define SUNI1x10GEXP_BITMSK_TXOAM_MINIPRE 0x003F + +/*---------------------------------------------------------------------------- + * Register 0x30C6: TXOAM Interrupt Enable + * Bit 2 TXOAM_SOP_ERRE + * Bit 1 TXOAM_OFLE + * Bit 0 TXOAM_ERRE + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_TXOAM_SOP_ERRE 0x0004 +#define SUNI1x10GEXP_BITMSK_TXOAM_OFLE 0x0002 +#define SUNI1x10GEXP_BITMSK_TXOAM_ERRE 0x0001 + +/*---------------------------------------------------------------------------- + * Register 0x30C7: TXOAM Interrupt Status + * Bit 2 TXOAM_SOP_ERRI + * Bit 1 TXOAM_OFLI + * Bit 0 TXOAM_ERRI + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_TXOAM_SOP_ERRI 0x0004 +#define SUNI1x10GEXP_BITMSK_TXOAM_OFLI 0x0002 +#define SUNI1x10GEXP_BITMSK_TXOAM_ERRI 0x0001 + +/*---------------------------------------------------------------------------- + * Register 0x30CF: TXOAM Coset + * Bit 7-0 TXOAM_COSET + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_TXOAM_COSET 0x00FF + +/*---------------------------------------------------------------------------- + * Register 0x3200: EFLX Global Configuration + * Bit 15 EFLX_ERCU_EN + * Bit 7 EFLX_EN_EDSWT + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_EFLX_ERCU_EN 0x8000 +#define SUNI1x10GEXP_BITMSK_EFLX_EN_EDSWT 0x0080 + +/*---------------------------------------------------------------------------- + * Register 0x3201: EFLX ERCU Global Status + * Bit 13 EFLX_OVF_ERR + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_EFLX_OVF_ERR 0x2000 + +/*---------------------------------------------------------------------------- + * Register 0x3202: EFLX Indirect Channel Address + * Bit 15 EFLX_BUSY + * Bit 14 EFLX_RDWRB + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_EFLX_BUSY 0x8000 +#define SUNI1x10GEXP_BITMSK_EFLX_RDWRB 0x4000 + +/*---------------------------------------------------------------------------- + * Register 0x3203: EFLX Indirect Logical FIFO Low Limit + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_EFLX_LOLIM 0x03FF +#define SUNI1x10GEXP_BITOFF_EFLX_LOLIM 0 + +/*---------------------------------------------------------------------------- + * Register 0x3204: EFLX Indirect Logical FIFO High Limit + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_EFLX_HILIM 0x03FF +#define SUNI1x10GEXP_BITOFF_EFLX_HILIM 0 + +/*---------------------------------------------------------------------------- + * Register 0x3205: EFLX Indirect Full/Almost-Full Status and Limit + * Bit 15 EFLX_FULL + * Bit 14 EFLX_AFULL + * Bit 13-0 EFLX_AFTH + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_EFLX_FULL 0x8000 +#define SUNI1x10GEXP_BITMSK_EFLX_AFULL 0x4000 +#define SUNI1x10GEXP_BITMSK_EFLX_AFTH 0x3FFF +#define SUNI1x10GEXP_BITOFF_EFLX_AFTH 0 + +/*---------------------------------------------------------------------------- + * Register 0x3206: EFLX Indirect Empty/Almost-Empty Status and Limit + * Bit 15 EFLX_EMPTY + * Bit 14 EFLX_AEMPTY + * Bit 13-0 EFLX_AETH + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_EFLX_EMPTY 0x8000 +#define SUNI1x10GEXP_BITMSK_EFLX_AEMPTY 0x4000 +#define SUNI1x10GEXP_BITMSK_EFLX_AETH 0x3FFF +#define SUNI1x10GEXP_BITOFF_EFLX_AETH 0 + +/*---------------------------------------------------------------------------- + * Register 0x3207: EFLX Indirect FIFO Cut-Through Threshold + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_EFLX_CUT_THRU 0x3FFF +#define SUNI1x10GEXP_BITOFF_EFLX_CUT_THRU 0 + +/*---------------------------------------------------------------------------- + * Register 0x320C: EFLX FIFO Overflow Error Enable + * Bit 0 EFLX_OVFE + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_EFLX_OVFE 0x0001 + +/*---------------------------------------------------------------------------- + * Register 0x320D: EFLX FIFO Overflow Error Indication + * Bit 0 EFLX_OVFI + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_EFLX_OVFI 0x0001 + +/*---------------------------------------------------------------------------- + * Register 0x3210: EFLX Channel Provision + * Bit 0 EFLX_PROV + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_EFLX_PROV 0x0001 + +/*---------------------------------------------------------------------------- + * Register 0x3280: PL4IDU Configuration + * Bit 2 PL4IDU_SYNCH_ON_TRAIN + * Bit 1 PL4IDU_EN_PORTS + * Bit 0 PL4IDU_EN_DFWD + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_PL4IDU_SYNCH_ON_TRAIN 0x0004 +#define SUNI1x10GEXP_BITMSK_PL4IDU_EN_PORTS 0x0002 +#define SUNI1x10GEXP_BITMSK_PL4IDU_EN_DFWD 0x0001 + +/*---------------------------------------------------------------------------- + * Register 0x3282: PL4IDU Interrupt Mask + * Bit 1 PL4IDU_DIP4E + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_PL4IDU_DIP4E 0x0002 + +/*---------------------------------------------------------------------------- + * Register 0x3283: PL4IDU Interrupt + * Bit 1 PL4IDU_DIP4I + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_PL4IDU_DIP4I 0x0002 #endif /* _CXGB_SUNI1x10GEXP_REGS_H_ */ diff --git a/drivers/net/chelsio/tp.c b/drivers/net/chelsio/tp.c new file mode 100644 index 00000000000..0ca0b6e19e4 --- /dev/null +++ b/drivers/net/chelsio/tp.c @@ -0,0 +1,178 @@ +/* $Date: 2006/02/07 04:21:54 $ $RCSfile: tp.c,v $ $Revision: 1.73 $ */ +#include "common.h" +#include "regs.h" +#include "tp.h" +#ifdef CONFIG_CHELSIO_T1_1G +#include "fpga_defs.h" +#endif + +struct petp { + adapter_t *adapter; +}; + +/* Pause deadlock avoidance parameters */ +#define DROP_MSEC 16 +#define DROP_PKTS_CNT 1 + +static void tp_init(adapter_t * ap, const struct tp_params *p, + unsigned int tp_clk) +{ + if (t1_is_asic(ap)) { + u32 val; + + val = F_TP_IN_CSPI_CPL | F_TP_IN_CSPI_CHECK_IP_CSUM | + F_TP_IN_CSPI_CHECK_TCP_CSUM | F_TP_IN_ESPI_ETHERNET; + if (!p->pm_size) + val |= F_OFFLOAD_DISABLE; + else + val |= F_TP_IN_ESPI_CHECK_IP_CSUM | + F_TP_IN_ESPI_CHECK_TCP_CSUM; + writel(val, ap->regs + A_TP_IN_CONFIG); + writel(F_TP_OUT_CSPI_CPL | + F_TP_OUT_ESPI_ETHERNET | + F_TP_OUT_ESPI_GENERATE_IP_CSUM | + F_TP_OUT_ESPI_GENERATE_TCP_CSUM, + ap->regs + A_TP_OUT_CONFIG); + writel(V_IP_TTL(64) | + F_PATH_MTU /* IP DF bit */ | + V_5TUPLE_LOOKUP(p->use_5tuple_mode) | + V_SYN_COOKIE_PARAMETER(29), + ap->regs + A_TP_GLOBAL_CONFIG); + /* + * Enable pause frame deadlock prevention. + */ + if (is_T2(ap) && ap->params.nports > 1) { + u32 drop_ticks = DROP_MSEC * (tp_clk / 1000); + + writel(F_ENABLE_TX_DROP | F_ENABLE_TX_ERROR | + V_DROP_TICKS_CNT(drop_ticks) | + V_NUM_PKTS_DROPPED(DROP_PKTS_CNT), + ap->regs + A_TP_TX_DROP_CONFIG); + } + + } +} + +void t1_tp_destroy(struct petp *tp) +{ + kfree(tp); +} + +struct petp *__devinit t1_tp_create(adapter_t * adapter, struct tp_params *p) +{ + struct petp *tp = kzalloc(sizeof(*tp), GFP_KERNEL); + if (!tp) + return NULL; + + tp->adapter = adapter; + + return tp; +} + +void t1_tp_intr_enable(struct petp *tp) +{ + u32 tp_intr = readl(tp->adapter->regs + A_PL_ENABLE); + +#ifdef CONFIG_CHELSIO_T1_1G + if (!t1_is_asic(tp->adapter)) { + /* FPGA */ + writel(0xffffffff, + tp->adapter->regs + FPGA_TP_ADDR_INTERRUPT_ENABLE); + writel(tp_intr | FPGA_PCIX_INTERRUPT_TP, + tp->adapter->regs + A_PL_ENABLE); + } else +#endif + { + /* We don't use any TP interrupts */ + writel(0, tp->adapter->regs + A_TP_INT_ENABLE); + writel(tp_intr | F_PL_INTR_TP, + tp->adapter->regs + A_PL_ENABLE); + } +} + +void t1_tp_intr_disable(struct petp *tp) +{ + u32 tp_intr = readl(tp->adapter->regs + A_PL_ENABLE); + +#ifdef CONFIG_CHELSIO_T1_1G + if (!t1_is_asic(tp->adapter)) { + /* FPGA */ + writel(0, tp->adapter->regs + FPGA_TP_ADDR_INTERRUPT_ENABLE); + writel(tp_intr & ~FPGA_PCIX_INTERRUPT_TP, + tp->adapter->regs + A_PL_ENABLE); + } else +#endif + { + writel(0, tp->adapter->regs + A_TP_INT_ENABLE); + writel(tp_intr & ~F_PL_INTR_TP, + tp->adapter->regs + A_PL_ENABLE); + } +} + +void t1_tp_intr_clear(struct petp *tp) +{ +#ifdef CONFIG_CHELSIO_T1_1G + if (!t1_is_asic(tp->adapter)) { + writel(0xffffffff, + tp->adapter->regs + FPGA_TP_ADDR_INTERRUPT_CAUSE); + writel(FPGA_PCIX_INTERRUPT_TP, tp->adapter->regs + A_PL_CAUSE); + return; + } +#endif + writel(0xffffffff, tp->adapter->regs + A_TP_INT_CAUSE); + writel(F_PL_INTR_TP, tp->adapter->regs + A_PL_CAUSE); +} + +int t1_tp_intr_handler(struct petp *tp) +{ + u32 cause; + +#ifdef CONFIG_CHELSIO_T1_1G + /* FPGA doesn't support TP interrupts. */ + if (!t1_is_asic(tp->adapter)) + return 1; +#endif + + cause = readl(tp->adapter->regs + A_TP_INT_CAUSE); + writel(cause, tp->adapter->regs + A_TP_INT_CAUSE); + return 0; +} + +static void set_csum_offload(struct petp *tp, u32 csum_bit, int enable) +{ + u32 val = readl(tp->adapter->regs + A_TP_GLOBAL_CONFIG); + + if (enable) + val |= csum_bit; + else + val &= ~csum_bit; + writel(val, tp->adapter->regs + A_TP_GLOBAL_CONFIG); +} + +void t1_tp_set_ip_checksum_offload(struct petp *tp, int enable) +{ + set_csum_offload(tp, F_IP_CSUM, enable); +} + +void t1_tp_set_udp_checksum_offload(struct petp *tp, int enable) +{ + set_csum_offload(tp, F_UDP_CSUM, enable); +} + +void t1_tp_set_tcp_checksum_offload(struct petp *tp, int enable) +{ + set_csum_offload(tp, F_TCP_CSUM, enable); +} + +/* + * Initialize TP state. tp_params contains initial settings for some TP + * parameters, particularly the one-time PM and CM settings. + */ +int t1_tp_reset(struct petp *tp, struct tp_params *p, unsigned int tp_clk) +{ + adapter_t *adapter = tp->adapter; + + tp_init(adapter, p, tp_clk); + writel(F_TP_RESET, adapter->regs + A_TP_RESET); + return 0; +} diff --git a/drivers/net/chelsio/tp.h b/drivers/net/chelsio/tp.h new file mode 100644 index 00000000000..32fc71e5891 --- /dev/null +++ b/drivers/net/chelsio/tp.h @@ -0,0 +1,73 @@ +/* $Date: 2005/03/07 23:59:05 $ $RCSfile: tp.h,v $ $Revision: 1.20 $ */ +#ifndef CHELSIO_TP_H +#define CHELSIO_TP_H + +#include "common.h" + +#define TP_MAX_RX_COALESCING_SIZE 16224U + +struct tp_mib_statistics { + + /* IP */ + u32 ipInReceive_hi; + u32 ipInReceive_lo; + u32 ipInHdrErrors_hi; + u32 ipInHdrErrors_lo; + u32 ipInAddrErrors_hi; + u32 ipInAddrErrors_lo; + u32 ipInUnknownProtos_hi; + u32 ipInUnknownProtos_lo; + u32 ipInDiscards_hi; + u32 ipInDiscards_lo; + u32 ipInDelivers_hi; + u32 ipInDelivers_lo; + u32 ipOutRequests_hi; + u32 ipOutRequests_lo; + u32 ipOutDiscards_hi; + u32 ipOutDiscards_lo; + u32 ipOutNoRoutes_hi; + u32 ipOutNoRoutes_lo; + u32 ipReasmTimeout; + u32 ipReasmReqds; + u32 ipReasmOKs; + u32 ipReasmFails; + + u32 reserved[8]; + + /* TCP */ + u32 tcpActiveOpens; + u32 tcpPassiveOpens; + u32 tcpAttemptFails; + u32 tcpEstabResets; + u32 tcpOutRsts; + u32 tcpCurrEstab; + u32 tcpInSegs_hi; + u32 tcpInSegs_lo; + u32 tcpOutSegs_hi; + u32 tcpOutSegs_lo; + u32 tcpRetransSeg_hi; + u32 tcpRetransSeg_lo; + u32 tcpInErrs_hi; + u32 tcpInErrs_lo; + u32 tcpRtoMin; + u32 tcpRtoMax; +}; + +struct petp; +struct tp_params; + +struct petp *t1_tp_create(adapter_t *adapter, struct tp_params *p); +void t1_tp_destroy(struct petp *tp); + +void t1_tp_intr_disable(struct petp *tp); +void t1_tp_intr_enable(struct petp *tp); +void t1_tp_intr_clear(struct petp *tp); +int t1_tp_intr_handler(struct petp *tp); + +void t1_tp_get_mib_statistics(adapter_t *adap, struct tp_mib_statistics *tps); +void t1_tp_set_udp_checksum_offload(struct petp *tp, int enable); +void t1_tp_set_tcp_checksum_offload(struct petp *tp, int enable); +void t1_tp_set_ip_checksum_offload(struct petp *tp, int enable); +int t1_tp_set_coalescing_size(struct petp *tp, unsigned int size); +int t1_tp_reset(struct petp *tp, struct tp_params *p, unsigned int tp_clk); +#endif diff --git a/drivers/net/chelsio/vsc7326.c b/drivers/net/chelsio/vsc7326.c new file mode 100644 index 00000000000..85dc3b1dc30 --- /dev/null +++ b/drivers/net/chelsio/vsc7326.c @@ -0,0 +1,725 @@ +/* $Date: 2006/04/28 19:20:06 $ $RCSfile: vsc7326.c,v $ $Revision: 1.19 $ */ + +/* Driver for Vitesse VSC7326 (Schaumburg) MAC */ + +#include "gmac.h" +#include "elmer0.h" +#include "vsc7326_reg.h" + +/* Update fast changing statistics every 15 seconds */ +#define STATS_TICK_SECS 15 +/* 30 minutes for full statistics update */ +#define MAJOR_UPDATE_TICKS (1800 / STATS_TICK_SECS) + +#define MAX_MTU 9600 + +/* The egress WM value 0x01a01fff should be used only when the + * interface is down (MAC port disabled). This is a workaround + * for disabling the T2/MAC flow-control. When the interface is + * enabled, the WM value should be set to 0x014a03F0. + */ +#define WM_DISABLE 0x01a01fff +#define WM_ENABLE 0x014a03F0 + +struct init_table { + u32 addr; + u32 data; +}; + +struct _cmac_instance { + u32 index; + u32 ticks; +}; + +#define INITBLOCK_SLEEP 0xffffffff + +static void vsc_read(adapter_t *adapter, u32 addr, u32 *val) +{ + u32 status, vlo, vhi; + int i; + + spin_lock_bh(&adapter->mac_lock); + t1_tpi_read(adapter, (addr << 2) + 4, &vlo); + i = 0; + do { + t1_tpi_read(adapter, (REG_LOCAL_STATUS << 2) + 4, &vlo); + t1_tpi_read(adapter, REG_LOCAL_STATUS << 2, &vhi); + status = (vhi << 16) | vlo; + i++; + } while (((status & 1) == 0) && (i < 50)); + if (i == 50) + CH_ERR("Invalid tpi read from MAC, breaking loop.\n"); + + t1_tpi_read(adapter, (REG_LOCAL_DATA << 2) + 4, &vlo); + t1_tpi_read(adapter, REG_LOCAL_DATA << 2, &vhi); + + *val = (vhi << 16) | vlo; + + /* CH_ERR("rd: block: 0x%x sublock: 0x%x reg: 0x%x data: 0x%x\n", + ((addr&0xe000)>>13), ((addr&0x1e00)>>9), + ((addr&0x01fe)>>1), *val); */ + spin_unlock_bh(&adapter->mac_lock); +} + +static void vsc_write(adapter_t *adapter, u32 addr, u32 data) +{ + spin_lock_bh(&adapter->mac_lock); + t1_tpi_write(adapter, (addr << 2) + 4, data & 0xFFFF); + t1_tpi_write(adapter, addr << 2, (data >> 16) & 0xFFFF); + /* CH_ERR("wr: block: 0x%x sublock: 0x%x reg: 0x%x data: 0x%x\n", + ((addr&0xe000)>>13), ((addr&0x1e00)>>9), + ((addr&0x01fe)>>1), data); */ + spin_unlock_bh(&adapter->mac_lock); +} + +/* Hard reset the MAC. This wipes out *all* configuration. */ +static void vsc7326_full_reset(adapter_t* adapter) +{ + u32 val; + u32 result = 0xffff; + + t1_tpi_read(adapter, A_ELMER0_GPO, &val); + val &= ~1; + t1_tpi_write(adapter, A_ELMER0_GPO, val); + udelay(2); + val |= 0x1; /* Enable mac MAC itself */ + val |= 0x800; /* Turn off the red LED */ + t1_tpi_write(adapter, A_ELMER0_GPO, val); + mdelay(1); + vsc_write(adapter, REG_SW_RESET, 0x80000001); + do { + mdelay(1); + vsc_read(adapter, REG_SW_RESET, &result); + } while (result != 0x0); +} + +static struct init_table vsc7326_reset[] = { + { REG_IFACE_MODE, 0x00000000 }, + { REG_CRC_CFG, 0x00000020 }, + { REG_PLL_CLK_SPEED, 0x00050c00 }, + { REG_PLL_CLK_SPEED, 0x00050c00 }, + { REG_MSCH, 0x00002f14 }, + { REG_SPI4_MISC, 0x00040409 }, + { REG_SPI4_DESKEW, 0x00080000 }, + { REG_SPI4_ING_SETUP2, 0x08080004 }, + { REG_SPI4_ING_SETUP0, 0x04111004 }, + { REG_SPI4_EGR_SETUP0, 0x80001a04 }, + { REG_SPI4_ING_SETUP1, 0x02010000 }, + { REG_AGE_INC(0), 0x00000000 }, + { REG_AGE_INC(1), 0x00000000 }, + { REG_ING_CONTROL, 0x0a200011 }, + { REG_EGR_CONTROL, 0xa0010091 }, +}; + +static struct init_table vsc7326_portinit[4][22] = { + { /* Port 0 */ + /* FIFO setup */ + { REG_DBG(0), 0x000004f0 }, + { REG_HDX(0), 0x00073101 }, + { REG_TEST(0,0), 0x00000022 }, + { REG_TEST(1,0), 0x00000022 }, + { REG_TOP_BOTTOM(0,0), 0x003f0000 }, + { REG_TOP_BOTTOM(1,0), 0x00120000 }, + { REG_HIGH_LOW_WM(0,0), 0x07460757 }, + { REG_HIGH_LOW_WM(1,0), WM_DISABLE }, + { REG_CT_THRHLD(0,0), 0x00000000 }, + { REG_CT_THRHLD(1,0), 0x00000000 }, + { REG_BUCKE(0), 0x0002ffff }, + { REG_BUCKI(0), 0x0002ffff }, + { REG_TEST(0,0), 0x00000020 }, + { REG_TEST(1,0), 0x00000020 }, + /* Port config */ + { REG_MAX_LEN(0), 0x00002710 }, + { REG_PORT_FAIL(0), 0x00000002 }, + { REG_NORMALIZER(0), 0x00000a64 }, + { REG_DENORM(0), 0x00000010 }, + { REG_STICK_BIT(0), 0x03baa370 }, + { REG_DEV_SETUP(0), 0x00000083 }, + { REG_DEV_SETUP(0), 0x00000082 }, + { REG_MODE_CFG(0), 0x0200259f }, + }, + { /* Port 1 */ + /* FIFO setup */ + { REG_DBG(1), 0x000004f0 }, + { REG_HDX(1), 0x00073101 }, + { REG_TEST(0,1), 0x00000022 }, + { REG_TEST(1,1), 0x00000022 }, + { REG_TOP_BOTTOM(0,1), 0x007e003f }, + { REG_TOP_BOTTOM(1,1), 0x00240012 }, + { REG_HIGH_LOW_WM(0,1), 0x07460757 }, + { REG_HIGH_LOW_WM(1,1), WM_DISABLE }, + { REG_CT_THRHLD(0,1), 0x00000000 }, + { REG_CT_THRHLD(1,1), 0x00000000 }, + { REG_BUCKE(1), 0x0002ffff }, + { REG_BUCKI(1), 0x0002ffff }, + { REG_TEST(0,1), 0x00000020 }, + { REG_TEST(1,1), 0x00000020 }, + /* Port config */ + { REG_MAX_LEN(1), 0x00002710 }, + { REG_PORT_FAIL(1), 0x00000002 }, + { REG_NORMALIZER(1), 0x00000a64 }, + { REG_DENORM(1), 0x00000010 }, + { REG_STICK_BIT(1), 0x03baa370 }, + { REG_DEV_SETUP(1), 0x00000083 }, + { REG_DEV_SETUP(1), 0x00000082 }, + { REG_MODE_CFG(1), 0x0200259f }, + }, + { /* Port 2 */ + /* FIFO setup */ + { REG_DBG(2), 0x000004f0 }, + { REG_HDX(2), 0x00073101 }, + { REG_TEST(0,2), 0x00000022 }, + { REG_TEST(1,2), 0x00000022 }, + { REG_TOP_BOTTOM(0,2), 0x00bd007e }, + { REG_TOP_BOTTOM(1,2), 0x00360024 }, + { REG_HIGH_LOW_WM(0,2), 0x07460757 }, + { REG_HIGH_LOW_WM(1,2), WM_DISABLE }, + { REG_CT_THRHLD(0,2), 0x00000000 }, + { REG_CT_THRHLD(1,2), 0x00000000 }, + { REG_BUCKE(2), 0x0002ffff }, + { REG_BUCKI(2), 0x0002ffff }, + { REG_TEST(0,2), 0x00000020 }, + { REG_TEST(1,2), 0x00000020 }, + /* Port config */ + { REG_MAX_LEN(2), 0x00002710 }, + { REG_PORT_FAIL(2), 0x00000002 }, + { REG_NORMALIZER(2), 0x00000a64 }, + { REG_DENORM(2), 0x00000010 }, + { REG_STICK_BIT(2), 0x03baa370 }, + { REG_DEV_SETUP(2), 0x00000083 }, + { REG_DEV_SETUP(2), 0x00000082 }, + { REG_MODE_CFG(2), 0x0200259f }, + }, + { /* Port 3 */ + /* FIFO setup */ + { REG_DBG(3), 0x000004f0 }, + { REG_HDX(3), 0x00073101 }, + { REG_TEST(0,3), 0x00000022 }, + { REG_TEST(1,3), 0x00000022 }, + { REG_TOP_BOTTOM(0,3), 0x00fc00bd }, + { REG_TOP_BOTTOM(1,3), 0x00480036 }, + { REG_HIGH_LOW_WM(0,3), 0x07460757 }, + { REG_HIGH_LOW_WM(1,3), WM_DISABLE }, + { REG_CT_THRHLD(0,3), 0x00000000 }, + { REG_CT_THRHLD(1,3), 0x00000000 }, + { REG_BUCKE(3), 0x0002ffff }, + { REG_BUCKI(3), 0x0002ffff }, + { REG_TEST(0,3), 0x00000020 }, + { REG_TEST(1,3), 0x00000020 }, + /* Port config */ + { REG_MAX_LEN(3), 0x00002710 }, + { REG_PORT_FAIL(3), 0x00000002 }, + { REG_NORMALIZER(3), 0x00000a64 }, + { REG_DENORM(3), 0x00000010 }, + { REG_STICK_BIT(3), 0x03baa370 }, + { REG_DEV_SETUP(3), 0x00000083 }, + { REG_DEV_SETUP(3), 0x00000082 }, + { REG_MODE_CFG(3), 0x0200259f }, + }, +}; + +static void run_table(adapter_t *adapter, struct init_table *ib, int len) +{ + int i; + + for (i = 0; i < len; i++) { + if (ib[i].addr == INITBLOCK_SLEEP) { + udelay( ib[i].data ); + CH_ERR("sleep %d us\n",ib[i].data); + } else { + vsc_write( adapter, ib[i].addr, ib[i].data ); + } + } +} + +static int bist_rd(adapter_t *adapter, int moduleid, int address) +{ + int data=0; + u32 result=0; + + if( (address != 0x0) && + (address != 0x1) && + (address != 0x2) && + (address != 0xd) && + (address != 0xe)) + CH_ERR("No bist address: 0x%x\n", address); + + data = ((0x00 << 24) | ((address & 0xff) << 16) | (0x00 << 8) | + ((moduleid & 0xff) << 0)); + vsc_write(adapter, REG_RAM_BIST_CMD, data); + + udelay(10); + + vsc_read(adapter, REG_RAM_BIST_RESULT, &result); + if((result & (1<<9)) != 0x0) + CH_ERR("Still in bist read: 0x%x\n", result); + else if((result & (1<<8)) != 0x0) + CH_ERR("bist read error: 0x%x\n", result); + + return(result & 0xff); +} + +static int bist_wr(adapter_t *adapter, int moduleid, int address, int value) +{ + int data=0; + u32 result=0; + + if( (address != 0x0) && + (address != 0x1) && + (address != 0x2) && + (address != 0xd) && + (address != 0xe)) + CH_ERR("No bist address: 0x%x\n", address); + + if( value>255 ) + CH_ERR("Suspicious write out of range value: 0x%x\n", value); + + data = ((0x01 << 24) | ((address & 0xff) << 16) | (value << 8) | + ((moduleid & 0xff) << 0)); + vsc_write(adapter, REG_RAM_BIST_CMD, data); + + udelay(5); + + vsc_read(adapter, REG_RAM_BIST_CMD, &result); + if((result & (1<<27)) != 0x0) + CH_ERR("Still in bist write: 0x%x\n", result); + else if((result & (1<<26)) != 0x0) + CH_ERR("bist write error: 0x%x\n", result); + + return(0); +} + +static int run_bist(adapter_t *adapter, int moduleid) +{ + /*run bist*/ + (void) bist_wr(adapter,moduleid, 0x00, 0x02); + (void) bist_wr(adapter,moduleid, 0x01, 0x01); + + return(0); +} + +static int check_bist(adapter_t *adapter, int moduleid) +{ + int result=0; + int column=0; + /*check bist*/ + result = bist_rd(adapter,moduleid, 0x02); + column = ((bist_rd(adapter,moduleid, 0x0e)<<8) + + (bist_rd(adapter,moduleid, 0x0d))); + if ((result & 3) != 0x3) + CH_ERR("Result: 0x%x BIST error in ram %d, column: 0x%04x\n", + result, moduleid, column); + return(0); +} + +static int enable_mem(adapter_t *adapter, int moduleid) +{ + /*enable mem*/ + (void) bist_wr(adapter,moduleid, 0x00, 0x00); + return(0); +} + +static int run_bist_all(adapter_t *adapter) +{ + int port=0; + u32 val=0; + + vsc_write(adapter, REG_MEM_BIST, 0x5); + vsc_read(adapter, REG_MEM_BIST, &val); + + for(port=0; port<12; port++){ + vsc_write(adapter, REG_DEV_SETUP(port), 0x0); + } + + udelay(300); + vsc_write(adapter, REG_SPI4_MISC, 0x00040409); + udelay(300); + + (void) run_bist(adapter,13); + (void) run_bist(adapter,14); + (void) run_bist(adapter,20); + (void) run_bist(adapter,21); + mdelay(200); + (void) check_bist(adapter,13); + (void) check_bist(adapter,14); + (void) check_bist(adapter,20); + (void) check_bist(adapter,21); + udelay(100); + (void) enable_mem(adapter,13); + (void) enable_mem(adapter,14); + (void) enable_mem(adapter,20); + (void) enable_mem(adapter,21); + udelay(300); + vsc_write(adapter, REG_SPI4_MISC, 0x60040400); + udelay(300); + for(port=0; port<12; port++){ + vsc_write(adapter, REG_DEV_SETUP(port), 0x1); + } + udelay(300); + vsc_write(adapter, REG_MEM_BIST, 0x0); + mdelay(10); + return(0); +} + +static int mac_intr_handler(struct cmac *mac) +{ + return 0; +} + +static int mac_intr_enable(struct cmac *mac) +{ + return 0; +} + +static int mac_intr_disable(struct cmac *mac) +{ + return 0; +} + +static int mac_intr_clear(struct cmac *mac) +{ + return 0; +} + +/* Expect MAC address to be in network byte order. */ +static int mac_set_address(struct cmac* mac, u8 addr[6]) +{ + u32 val; + int port = mac->instance->index; + + vsc_write(mac->adapter, REG_MAC_LOW_ADDR(port), + (addr[3] << 16) | (addr[4] << 8) | addr[5]); + vsc_write(mac->adapter, REG_MAC_HIGH_ADDR(port), + (addr[0] << 16) | (addr[1] << 8) | addr[2]); + + vsc_read(mac->adapter, REG_ING_FFILT_UM_EN, &val); + val &= ~0xf0000000; + vsc_write(mac->adapter, REG_ING_FFILT_UM_EN, val | (port << 28)); + + vsc_write(mac->adapter, REG_ING_FFILT_MASK0, + 0xffff0000 | (addr[4] << 8) | addr[5]); + vsc_write(mac->adapter, REG_ING_FFILT_MASK1, + 0xffff0000 | (addr[2] << 8) | addr[3]); + vsc_write(mac->adapter, REG_ING_FFILT_MASK2, + 0xffff0000 | (addr[0] << 8) | addr[1]); + return 0; +} + +static int mac_get_address(struct cmac *mac, u8 addr[6]) +{ + u32 addr_lo, addr_hi; + int port = mac->instance->index; + + vsc_read(mac->adapter, REG_MAC_LOW_ADDR(port), &addr_lo); + vsc_read(mac->adapter, REG_MAC_HIGH_ADDR(port), &addr_hi); + + addr[0] = (u8) (addr_hi >> 16); + addr[1] = (u8) (addr_hi >> 8); + addr[2] = (u8) addr_hi; + addr[3] = (u8) (addr_lo >> 16); + addr[4] = (u8) (addr_lo >> 8); + addr[5] = (u8) addr_lo; + return 0; +} + +/* This is intended to reset a port, not the whole MAC */ +static int mac_reset(struct cmac *mac) +{ + int index = mac->instance->index; + + run_table(mac->adapter, vsc7326_portinit[index], + ARRAY_SIZE(vsc7326_portinit[index])); + + return 0; +} + +static int mac_set_rx_mode(struct cmac *mac, struct t1_rx_mode *rm) +{ + u32 v; + int port = mac->instance->index; + + vsc_read(mac->adapter, REG_ING_FFILT_UM_EN, &v); + v |= 1 << 12; + + if (t1_rx_mode_promisc(rm)) + v &= ~(1 << (port + 16)); + else + v |= 1 << (port + 16); + + vsc_write(mac->adapter, REG_ING_FFILT_UM_EN, v); + return 0; +} + +static int mac_set_mtu(struct cmac *mac, int mtu) +{ + int port = mac->instance->index; + + if (mtu > MAX_MTU) + return -EINVAL; + + /* max_len includes header and FCS */ + vsc_write(mac->adapter, REG_MAX_LEN(port), mtu + 14 + 4); + return 0; +} + +static int mac_set_speed_duplex_fc(struct cmac *mac, int speed, int duplex, + int fc) +{ + u32 v; + int enable, port = mac->instance->index; + + if (speed >= 0 && speed != SPEED_10 && speed != SPEED_100 && + speed != SPEED_1000) + return -1; + if (duplex > 0 && duplex != DUPLEX_FULL) + return -1; + + if (speed >= 0) { + vsc_read(mac->adapter, REG_MODE_CFG(port), &v); + enable = v & 3; /* save tx/rx enables */ + v &= ~0xf; + v |= 4; /* full duplex */ + if (speed == SPEED_1000) + v |= 8; /* GigE */ + enable |= v; + vsc_write(mac->adapter, REG_MODE_CFG(port), v); + + if (speed == SPEED_1000) + v = 0x82; + else if (speed == SPEED_100) + v = 0x84; + else /* SPEED_10 */ + v = 0x86; + vsc_write(mac->adapter, REG_DEV_SETUP(port), v | 1); /* reset */ + vsc_write(mac->adapter, REG_DEV_SETUP(port), v); + vsc_read(mac->adapter, REG_DBG(port), &v); + v &= ~0xff00; + if (speed == SPEED_1000) + v |= 0x400; + else if (speed == SPEED_100) + v |= 0x2000; + else /* SPEED_10 */ + v |= 0xff00; + vsc_write(mac->adapter, REG_DBG(port), v); + + vsc_write(mac->adapter, REG_TX_IFG(port), + speed == SPEED_1000 ? 5 : 0x11); + if (duplex == DUPLEX_HALF) + enable = 0x0; /* 100 or 10 */ + else if (speed == SPEED_1000) + enable = 0xc; + else /* SPEED_100 or 10 */ + enable = 0x4; + enable |= 0x9 << 10; /* IFG1 */ + enable |= 0x6 << 6; /* IFG2 */ + enable |= 0x1 << 4; /* VLAN */ + enable |= 0x3; /* RX/TX EN */ + vsc_write(mac->adapter, REG_MODE_CFG(port), enable); + + } + + vsc_read(mac->adapter, REG_PAUSE_CFG(port), &v); + v &= 0xfff0ffff; + v |= 0x20000; /* xon/xoff */ + if (fc & PAUSE_RX) + v |= 0x40000; + if (fc & PAUSE_TX) + v |= 0x80000; + if (fc == (PAUSE_RX | PAUSE_TX)) + v |= 0x10000; + vsc_write(mac->adapter, REG_PAUSE_CFG(port), v); + return 0; +} + +static int mac_enable(struct cmac *mac, int which) +{ + u32 val; + int port = mac->instance->index; + + /* Write the correct WM value when the port is enabled. */ + vsc_write(mac->adapter, REG_HIGH_LOW_WM(1,port), WM_ENABLE); + + vsc_read(mac->adapter, REG_MODE_CFG(port), &val); + if (which & MAC_DIRECTION_RX) + val |= 0x2; + if (which & MAC_DIRECTION_TX) + val |= 1; + vsc_write(mac->adapter, REG_MODE_CFG(port), val); + return 0; +} + +static int mac_disable(struct cmac *mac, int which) +{ + u32 val; + int i, port = mac->instance->index; + + /* Reset the port, this also writes the correct WM value */ + mac_reset(mac); + + vsc_read(mac->adapter, REG_MODE_CFG(port), &val); + if (which & MAC_DIRECTION_RX) + val &= ~0x2; + if (which & MAC_DIRECTION_TX) + val &= ~0x1; + vsc_write(mac->adapter, REG_MODE_CFG(port), val); + vsc_read(mac->adapter, REG_MODE_CFG(port), &val); + + /* Clear stats */ + for (i = 0; i <= 0x3a; ++i) + vsc_write(mac->adapter, CRA(4, port, i), 0); + + /* Clear sofware counters */ + memset(&mac->stats, 0, sizeof(struct cmac_statistics)); + + return 0; +} + +static void rmon_update(struct cmac *mac, unsigned int addr, u64 *stat) +{ + u32 v, lo; + + vsc_read(mac->adapter, addr, &v); + lo = *stat; + *stat = *stat - lo + v; + + if (v == 0) + return; + + if (v < lo) + *stat += (1ULL << 32); +} + +static void port_stats_update(struct cmac *mac) +{ + int port = mac->instance->index; + + /* Rx stats */ + rmon_update(mac, REG_RX_OK_BYTES(port), &mac->stats.RxOctetsOK); + rmon_update(mac, REG_RX_BAD_BYTES(port), &mac->stats.RxOctetsBad); + rmon_update(mac, REG_RX_UNICAST(port), &mac->stats.RxUnicastFramesOK); + rmon_update(mac, REG_RX_MULTICAST(port), + &mac->stats.RxMulticastFramesOK); + rmon_update(mac, REG_RX_BROADCAST(port), + &mac->stats.RxBroadcastFramesOK); + rmon_update(mac, REG_CRC(port), &mac->stats.RxFCSErrors); + rmon_update(mac, REG_RX_ALIGNMENT(port), &mac->stats.RxAlignErrors); + rmon_update(mac, REG_RX_OVERSIZE(port), + &mac->stats.RxFrameTooLongErrors); + rmon_update(mac, REG_RX_PAUSE(port), &mac->stats.RxPauseFrames); + rmon_update(mac, REG_RX_JABBERS(port), &mac->stats.RxJabberErrors); + rmon_update(mac, REG_RX_FRAGMENTS(port), &mac->stats.RxRuntErrors); + rmon_update(mac, REG_RX_UNDERSIZE(port), &mac->stats.RxRuntErrors); + rmon_update(mac, REG_RX_SYMBOL_CARRIER(port), + &mac->stats.RxSymbolErrors); + rmon_update(mac, REG_RX_SIZE_1519_TO_MAX(port), + &mac->stats.RxJumboFramesOK); + + /* Tx stats (skip collision stats as we are full-duplex only) */ + rmon_update(mac, REG_TX_OK_BYTES(port), &mac->stats.TxOctetsOK); + rmon_update(mac, REG_TX_UNICAST(port), &mac->stats.TxUnicastFramesOK); + rmon_update(mac, REG_TX_MULTICAST(port), + &mac->stats.TxMulticastFramesOK); + rmon_update(mac, REG_TX_BROADCAST(port), + &mac->stats.TxBroadcastFramesOK); + rmon_update(mac, REG_TX_PAUSE(port), &mac->stats.TxPauseFrames); + rmon_update(mac, REG_TX_UNDERRUN(port), &mac->stats.TxUnderrun); + rmon_update(mac, REG_TX_SIZE_1519_TO_MAX(port), + &mac->stats.TxJumboFramesOK); +} + +/* + * This function is called periodically to accumulate the current values of the + * RMON counters into the port statistics. Since the counters are only 32 bits + * some of them can overflow in less than a minute at GigE speeds, so this + * function should be called every 30 seconds or so. + * + * To cut down on reading costs we update only the octet counters at each tick + * and do a full update at major ticks, which can be every 30 minutes or more. + */ +static const struct cmac_statistics *mac_update_statistics(struct cmac *mac, + int flag) +{ + if (flag == MAC_STATS_UPDATE_FULL || + mac->instance->ticks >= MAJOR_UPDATE_TICKS) { + port_stats_update(mac); + mac->instance->ticks = 0; + } else { + int port = mac->instance->index; + + rmon_update(mac, REG_RX_OK_BYTES(port), + &mac->stats.RxOctetsOK); + rmon_update(mac, REG_RX_BAD_BYTES(port), + &mac->stats.RxOctetsBad); + rmon_update(mac, REG_TX_OK_BYTES(port), + &mac->stats.TxOctetsOK); + mac->instance->ticks++; + } + return &mac->stats; +} + +static void mac_destroy(struct cmac *mac) +{ + kfree(mac); +} + +static struct cmac_ops vsc7326_ops = { + .destroy = mac_destroy, + .reset = mac_reset, + .interrupt_handler = mac_intr_handler, + .interrupt_enable = mac_intr_enable, + .interrupt_disable = mac_intr_disable, + .interrupt_clear = mac_intr_clear, + .enable = mac_enable, + .disable = mac_disable, + .set_mtu = mac_set_mtu, + .set_rx_mode = mac_set_rx_mode, + .set_speed_duplex_fc = mac_set_speed_duplex_fc, + .statistics_update = mac_update_statistics, + .macaddress_get = mac_get_address, + .macaddress_set = mac_set_address, +}; + +static struct cmac *vsc7326_mac_create(adapter_t *adapter, int index) +{ + struct cmac *mac; + u32 val; + int i; + + mac = kzalloc(sizeof(*mac) + sizeof(cmac_instance), GFP_KERNEL); + if (!mac) return NULL; + + mac->ops = &vsc7326_ops; + mac->instance = (cmac_instance *)(mac + 1); + mac->adapter = adapter; + + mac->instance->index = index; + mac->instance->ticks = 0; + + i = 0; + do { + u32 vhi, vlo; + + vhi = vlo = 0; + t1_tpi_read(adapter, (REG_LOCAL_STATUS << 2) + 4, &vlo); + udelay(1); + t1_tpi_read(adapter, REG_LOCAL_STATUS << 2, &vhi); + udelay(5); + val = (vhi << 16) | vlo; + } while ((++i < 10000) && (val == 0xffffffff)); + + return mac; +} + +static int vsc7326_mac_reset(adapter_t *adapter) +{ + vsc7326_full_reset(adapter); + (void) run_bist_all(adapter); + run_table(adapter, vsc7326_reset, ARRAY_SIZE(vsc7326_reset)); + return 0; +} + +struct gmac t1_vsc7326_ops = { + .stats_update_period = STATS_TICK_SECS, + .create = vsc7326_mac_create, + .reset = vsc7326_mac_reset, +}; diff --git a/drivers/net/chelsio/vsc7326_reg.h b/drivers/net/chelsio/vsc7326_reg.h new file mode 100644 index 00000000000..491bcf75c4f --- /dev/null +++ b/drivers/net/chelsio/vsc7326_reg.h @@ -0,0 +1,286 @@ +/* $Date: 2006/04/28 19:20:17 $ $RCSfile: vsc7326_reg.h,v $ $Revision: 1.5 $ */ +#ifndef _VSC7321_REG_H_ +#define _VSC7321_REG_H_ + +/* Register definitions for Vitesse VSC7321 (Meigs II) MAC + * + * Straight off the data sheet, VMDS-10038 Rev 2.0 and + * PD0011-01-14-Meigs-II 2002-12-12 + */ + +/* Just 'cause it's in here doesn't mean it's used. */ + +#define CRA(blk,sub,adr) ((((blk) & 0x7) << 13) | (((sub) & 0xf) << 9) | (((adr) & 0xff) << 1)) + +/* System and CPU comm's registers */ +#define REG_CHIP_ID CRA(0x7,0xf,0x00) /* Chip ID */ +#define REG_BLADE_ID CRA(0x7,0xf,0x01) /* Blade ID */ +#define REG_SW_RESET CRA(0x7,0xf,0x02) /* Global Soft Reset */ +#define REG_MEM_BIST CRA(0x7,0xf,0x04) /* mem */ +#define REG_IFACE_MODE CRA(0x7,0xf,0x07) /* Interface mode */ +#define REG_MSCH CRA(0x7,0x2,0x06) /* CRC error count */ +#define REG_CRC_CNT CRA(0x7,0x2,0x0a) /* CRC error count */ +#define REG_CRC_CFG CRA(0x7,0x2,0x0b) /* CRC config */ +#define REG_SI_TRANSFER_SEL CRA(0x7,0xf,0x18) /* SI Transfer Select */ +#define REG_PLL_CLK_SPEED CRA(0x7,0xf,0x19) /* Clock Speed Selection */ +#define REG_SYS_CLK_SELECT CRA(0x7,0xf,0x1c) /* System Clock Select */ +#define REG_GPIO_CTRL CRA(0x7,0xf,0x1d) /* GPIO Control */ +#define REG_GPIO_OUT CRA(0x7,0xf,0x1e) /* GPIO Out */ +#define REG_GPIO_IN CRA(0x7,0xf,0x1f) /* GPIO In */ +#define REG_CPU_TRANSFER_SEL CRA(0x7,0xf,0x20) /* CPU Transfer Select */ +#define REG_LOCAL_DATA CRA(0x7,0xf,0xfe) /* Local CPU Data Register */ +#define REG_LOCAL_STATUS CRA(0x7,0xf,0xff) /* Local CPU Status Register */ + +/* Aggregator registers */ +#define REG_AGGR_SETUP CRA(0x7,0x1,0x00) /* Aggregator Setup */ +#define REG_PMAP_TABLE CRA(0x7,0x1,0x01) /* Port map table */ +#define REG_MPLS_BIT0 CRA(0x7,0x1,0x08) /* MPLS bit0 position */ +#define REG_MPLS_BIT1 CRA(0x7,0x1,0x09) /* MPLS bit1 position */ +#define REG_MPLS_BIT2 CRA(0x7,0x1,0x0a) /* MPLS bit2 position */ +#define REG_MPLS_BIT3 CRA(0x7,0x1,0x0b) /* MPLS bit3 position */ +#define REG_MPLS_BITMASK CRA(0x7,0x1,0x0c) /* MPLS bit mask */ +#define REG_PRE_BIT0POS CRA(0x7,0x1,0x10) /* Preamble bit0 position */ +#define REG_PRE_BIT1POS CRA(0x7,0x1,0x11) /* Preamble bit1 position */ +#define REG_PRE_BIT2POS CRA(0x7,0x1,0x12) /* Preamble bit2 position */ +#define REG_PRE_BIT3POS CRA(0x7,0x1,0x13) /* Preamble bit3 position */ +#define REG_PRE_ERR_CNT CRA(0x7,0x1,0x14) /* Preamble parity error count */ + +/* BIST registers */ +/*#define REG_RAM_BIST_CMD CRA(0x7,0x2,0x00)*/ /* RAM BIST Command Register */ +/*#define REG_RAM_BIST_RESULT CRA(0x7,0x2,0x01)*/ /* RAM BIST Read Status/Result */ +#define REG_RAM_BIST_CMD CRA(0x7,0x1,0x00) /* RAM BIST Command Register */ +#define REG_RAM_BIST_RESULT CRA(0x7,0x1,0x01) /* RAM BIST Read Status/Result */ +#define BIST_PORT_SELECT 0x00 /* BIST port select */ +#define BIST_COMMAND 0x01 /* BIST enable/disable */ +#define BIST_STATUS 0x02 /* BIST operation status */ +#define BIST_ERR_CNT_LSB 0x03 /* BIST error count lo 8b */ +#define BIST_ERR_CNT_MSB 0x04 /* BIST error count hi 8b */ +#define BIST_ERR_SEL_LSB 0x05 /* BIST error select lo 8b */ +#define BIST_ERR_SEL_MSB 0x06 /* BIST error select hi 8b */ +#define BIST_ERROR_STATE 0x07 /* BIST engine internal state */ +#define BIST_ERR_ADR0 0x08 /* BIST error address lo 8b */ +#define BIST_ERR_ADR1 0x09 /* BIST error address lomid 8b */ +#define BIST_ERR_ADR2 0x0a /* BIST error address himid 8b */ +#define BIST_ERR_ADR3 0x0b /* BIST error address hi 8b */ + +/* FIFO registers + * ie = 0 for ingress, 1 for egress + * fn = FIFO number, 0-9 + */ +#define REG_TEST(ie,fn) CRA(0x2,ie&1,0x00+fn) /* Mode & Test Register */ +#define REG_TOP_BOTTOM(ie,fn) CRA(0x2,ie&1,0x10+fn) /* FIFO Buffer Top & Bottom */ +#define REG_TAIL(ie,fn) CRA(0x2,ie&1,0x20+fn) /* FIFO Write Pointer */ +#define REG_HEAD(ie,fn) CRA(0x2,ie&1,0x30+fn) /* FIFO Read Pointer */ +#define REG_HIGH_LOW_WM(ie,fn) CRA(0x2,ie&1,0x40+fn) /* Flow Control Water Marks */ +#define REG_CT_THRHLD(ie,fn) CRA(0x2,ie&1,0x50+fn) /* Cut Through Threshold */ +#define REG_FIFO_DROP_CNT(ie,fn) CRA(0x2,ie&1,0x60+fn) /* Drop & CRC Error Counter */ +#define REG_DEBUG_BUF_CNT(ie,fn) CRA(0x2,ie&1,0x70+fn) /* Input Side Debug Counter */ +#define REG_BUCKI(fn) CRA(0x2,2,0x20+fn) /* Input Side Debug Counter */ +#define REG_BUCKE(fn) CRA(0x2,3,0x20+fn) /* Input Side Debug Counter */ + +/* Traffic shaper buckets + * ie = 0 for ingress, 1 for egress + * bn = bucket number 0-10 (yes, 11 buckets) + */ +/* OK, this one's kinda ugly. Some hardware designers are perverse. */ +#define REG_TRAFFIC_SHAPER_BUCKET(ie,bn) CRA(0x2,ie&1,0x0a + (bn>7) | ((bn&7)<<4)) +#define REG_TRAFFIC_SHAPER_CONTROL(ie) CRA(0x2,ie&1,0x3b) + +#define REG_SRAM_ADR(ie) CRA(0x2,ie&1,0x0e) /* FIFO SRAM address */ +#define REG_SRAM_WR_STRB(ie) CRA(0x2,ie&1,0x1e) /* FIFO SRAM write strobe */ +#define REG_SRAM_RD_STRB(ie) CRA(0x2,ie&1,0x2e) /* FIFO SRAM read strobe */ +#define REG_SRAM_DATA_0(ie) CRA(0x2,ie&1,0x3e) /* FIFO SRAM data lo 8b */ +#define REG_SRAM_DATA_1(ie) CRA(0x2,ie&1,0x4e) /* FIFO SRAM data lomid 8b */ +#define REG_SRAM_DATA_2(ie) CRA(0x2,ie&1,0x5e) /* FIFO SRAM data himid 8b */ +#define REG_SRAM_DATA_3(ie) CRA(0x2,ie&1,0x6e) /* FIFO SRAM data hi 8b */ +#define REG_SRAM_DATA_BLK_TYPE(ie) CRA(0x2,ie&1,0x7e) /* FIFO SRAM tag */ +/* REG_ING_CONTROL equals REG_CONTROL with ie = 0, likewise REG_EGR_CONTROL is ie = 1 */ +#define REG_CONTROL(ie) CRA(0x2,ie&1,0x0f) /* FIFO control */ +#define REG_ING_CONTROL CRA(0x2,0x0,0x0f) /* Ingress control (alias) */ +#define REG_EGR_CONTROL CRA(0x2,0x1,0x0f) /* Egress control (alias) */ +#define REG_AGE_TIMER(ie) CRA(0x2,ie&1,0x1f) /* Aging timer */ +#define REG_AGE_INC(ie) CRA(0x2,ie&1,0x2f) /* Aging increment */ +#define DEBUG_OUT(ie) CRA(0x2,ie&1,0x3f) /* Output debug counter control */ +#define DEBUG_CNT(ie) CRA(0x2,ie&1,0x4f) /* Output debug counter */ + +/* SPI4 interface */ +#define REG_SPI4_MISC CRA(0x5,0x0,0x00) /* Misc Register */ +#define REG_SPI4_STATUS CRA(0x5,0x0,0x01) /* CML Status */ +#define REG_SPI4_ING_SETUP0 CRA(0x5,0x0,0x02) /* Ingress Status Channel Setup */ +#define REG_SPI4_ING_SETUP1 CRA(0x5,0x0,0x03) /* Ingress Data Training Setup */ +#define REG_SPI4_ING_SETUP2 CRA(0x5,0x0,0x04) /* Ingress Data Burst Size Setup */ +#define REG_SPI4_EGR_SETUP0 CRA(0x5,0x0,0x05) /* Egress Status Channel Setup */ +#define REG_SPI4_DBG_CNT(n) CRA(0x5,0x0,0x10+n) /* Debug counters 0-9 */ +#define REG_SPI4_DBG_SETUP CRA(0x5,0x0,0x1A) /* Debug counters setup */ +#define REG_SPI4_TEST CRA(0x5,0x0,0x20) /* Test Setup Register */ +#define REG_TPGEN_UP0 CRA(0x5,0x0,0x21) /* Test Pattern generator user pattern 0 */ +#define REG_TPGEN_UP1 CRA(0x5,0x0,0x22) /* Test Pattern generator user pattern 1 */ +#define REG_TPCHK_UP0 CRA(0x5,0x0,0x23) /* Test Pattern checker user pattern 0 */ +#define REG_TPCHK_UP1 CRA(0x5,0x0,0x24) /* Test Pattern checker user pattern 1 */ +#define REG_TPSAM_P0 CRA(0x5,0x0,0x25) /* Sampled pattern 0 */ +#define REG_TPSAM_P1 CRA(0x5,0x0,0x26) /* Sampled pattern 1 */ +#define REG_TPERR_CNT CRA(0x5,0x0,0x27) /* Pattern checker error counter */ +#define REG_SPI4_STICKY CRA(0x5,0x0,0x30) /* Sticky bits register */ +#define REG_SPI4_DBG_INH CRA(0x5,0x0,0x31) /* Core egress & ingress inhibit */ +#define REG_SPI4_DBG_STATUS CRA(0x5,0x0,0x32) /* Sampled ingress status */ +#define REG_SPI4_DBG_GRANT CRA(0x5,0x0,0x33) /* Ingress cranted credit value */ + +#define REG_SPI4_DESKEW CRA(0x5,0x0,0x43) /* Ingress cranted credit value */ + +/* 10GbE MAC Block Registers */ +/* Note that those registers that are exactly the same for 10GbE as for + * tri-speed are only defined with the version that needs a port number. + * Pass 0xa in those cases. + * + * Also note that despite the presence of a MAC address register, this part + * does no ingress MAC address filtering. That register is used only for + * pause frame detection and generation. + */ +/* 10GbE specific, and different from tri-speed */ +#define REG_MISC_10G CRA(0x1,0xa,0x00) /* Misc 10GbE setup */ +#define REG_PAUSE_10G CRA(0x1,0xa,0x01) /* Pause register */ +#define REG_NORMALIZER_10G CRA(0x1,0xa,0x05) /* 10G normalizer */ +#define REG_STICKY_RX CRA(0x1,0xa,0x06) /* RX debug register */ +#define REG_DENORM_10G CRA(0x1,0xa,0x07) /* Denormalizer */ +#define REG_STICKY_TX CRA(0x1,0xa,0x08) /* TX sticky bits */ +#define REG_MAX_RXHIGH CRA(0x1,0xa,0x0a) /* XGMII lane 0-3 debug */ +#define REG_MAX_RXLOW CRA(0x1,0xa,0x0b) /* XGMII lane 4-7 debug */ +#define REG_MAC_TX_STICKY CRA(0x1,0xa,0x0c) /* MAC Tx state sticky debug */ +#define REG_MAC_TX_RUNNING CRA(0x1,0xa,0x0d) /* MAC Tx state running debug */ +#define REG_TX_ABORT_AGE CRA(0x1,0xa,0x14) /* Aged Tx frames discarded */ +#define REG_TX_ABORT_SHORT CRA(0x1,0xa,0x15) /* Short Tx frames discarded */ +#define REG_TX_ABORT_TAXI CRA(0x1,0xa,0x16) /* Taxi error frames discarded */ +#define REG_TX_ABORT_UNDERRUN CRA(0x1,0xa,0x17) /* Tx Underrun abort counter */ +#define REG_TX_DENORM_DISCARD CRA(0x1,0xa,0x18) /* Tx denormalizer discards */ +#define REG_XAUI_STAT_A CRA(0x1,0xa,0x20) /* XAUI status A */ +#define REG_XAUI_STAT_B CRA(0x1,0xa,0x21) /* XAUI status B */ +#define REG_XAUI_STAT_C CRA(0x1,0xa,0x22) /* XAUI status C */ +#define REG_XAUI_CONF_A CRA(0x1,0xa,0x23) /* XAUI configuration A */ +#define REG_XAUI_CONF_B CRA(0x1,0xa,0x24) /* XAUI configuration B */ +#define REG_XAUI_CODE_GRP_CNT CRA(0x1,0xa,0x25) /* XAUI code group error count */ +#define REG_XAUI_CONF_TEST_A CRA(0x1,0xa,0x26) /* XAUI test register A */ +#define REG_PDERRCNT CRA(0x1,0xa,0x27) /* XAUI test register B */ + +/* pn = port number 0-9 for tri-speed, 10 for 10GbE */ +/* Both tri-speed and 10GbE */ +#define REG_MAX_LEN(pn) CRA(0x1,pn,0x02) /* Max length */ +#define REG_MAC_HIGH_ADDR(pn) CRA(0x1,pn,0x03) /* Upper 24 bits of MAC addr */ +#define REG_MAC_LOW_ADDR(pn) CRA(0x1,pn,0x04) /* Lower 24 bits of MAC addr */ + +/* tri-speed only + * pn = port number, 0-9 + */ +#define REG_MODE_CFG(pn) CRA(0x1,pn,0x00) /* Mode configuration */ +#define REG_PAUSE_CFG(pn) CRA(0x1,pn,0x01) /* Pause configuration */ +#define REG_NORMALIZER(pn) CRA(0x1,pn,0x05) /* Normalizer */ +#define REG_TBI_STATUS(pn) CRA(0x1,pn,0x06) /* TBI status */ +#define REG_PCS_STATUS_DBG(pn) CRA(0x1,pn,0x07) /* PCS status debug */ +#define REG_PCS_CTRL(pn) CRA(0x1,pn,0x08) /* PCS control */ +#define REG_TBI_CONFIG(pn) CRA(0x1,pn,0x09) /* TBI configuration */ +#define REG_STICK_BIT(pn) CRA(0x1,pn,0x0a) /* Sticky bits */ +#define REG_DEV_SETUP(pn) CRA(0x1,pn,0x0b) /* MAC clock/reset setup */ +#define REG_DROP_CNT(pn) CRA(0x1,pn,0x0c) /* Drop counter */ +#define REG_PORT_POS(pn) CRA(0x1,pn,0x0d) /* Preamble port position */ +#define REG_PORT_FAIL(pn) CRA(0x1,pn,0x0e) /* Preamble port position */ +#define REG_SERDES_CONF(pn) CRA(0x1,pn,0x0f) /* SerDes configuration */ +#define REG_SERDES_TEST(pn) CRA(0x1,pn,0x10) /* SerDes test */ +#define REG_SERDES_STAT(pn) CRA(0x1,pn,0x11) /* SerDes status */ +#define REG_SERDES_COM_CNT(pn) CRA(0x1,pn,0x12) /* SerDes comma counter */ +#define REG_DENORM(pn) CRA(0x1,pn,0x15) /* Frame denormalization */ +#define REG_DBG(pn) CRA(0x1,pn,0x16) /* Device 1G debug */ +#define REG_TX_IFG(pn) CRA(0x1,pn,0x18) /* Tx IFG config */ +#define REG_HDX(pn) CRA(0x1,pn,0x19) /* Half-duplex config */ + +/* Statistics */ +/* pn = port number, 0-a, a = 10GbE */ +#define REG_RX_IN_BYTES(pn) CRA(0x4,pn,0x00) /* # Rx in octets */ +#define REG_RX_SYMBOL_CARRIER(pn) CRA(0x4,pn,0x01) /* Frames w/ symbol errors */ +#define REG_RX_PAUSE(pn) CRA(0x4,pn,0x02) /* # pause frames received */ +#define REG_RX_UNSUP_OPCODE(pn) CRA(0x4,pn,0x03) /* # control frames with unsupported opcode */ +#define REG_RX_OK_BYTES(pn) CRA(0x4,pn,0x04) /* # octets in good frames */ +#define REG_RX_BAD_BYTES(pn) CRA(0x4,pn,0x05) /* # octets in bad frames */ +#define REG_RX_UNICAST(pn) CRA(0x4,pn,0x06) /* # good unicast frames */ +#define REG_RX_MULTICAST(pn) CRA(0x4,pn,0x07) /* # good multicast frames */ +#define REG_RX_BROADCAST(pn) CRA(0x4,pn,0x08) /* # good broadcast frames */ +#define REG_CRC(pn) CRA(0x4,pn,0x09) /* # frames w/ bad CRC only */ +#define REG_RX_ALIGNMENT(pn) CRA(0x4,pn,0x0a) /* # frames w/ alignment err */ +#define REG_RX_UNDERSIZE(pn) CRA(0x4,pn,0x0b) /* # frames undersize */ +#define REG_RX_FRAGMENTS(pn) CRA(0x4,pn,0x0c) /* # frames undersize w/ crc err */ +#define REG_RX_IN_RANGE_LENGTH_ERROR(pn) CRA(0x4,pn,0x0d) /* # frames with length error */ +#define REG_RX_OUT_OF_RANGE_ERROR(pn) CRA(0x4,pn,0x0e) /* # frames with illegal length field */ +#define REG_RX_OVERSIZE(pn) CRA(0x4,pn,0x0f) /* # frames oversize */ +#define REG_RX_JABBERS(pn) CRA(0x4,pn,0x10) /* # frames oversize w/ crc err */ +#define REG_RX_SIZE_64(pn) CRA(0x4,pn,0x11) /* # frames 64 octets long */ +#define REG_RX_SIZE_65_TO_127(pn) CRA(0x4,pn,0x12) /* # frames 65-127 octets */ +#define REG_RX_SIZE_128_TO_255(pn) CRA(0x4,pn,0x13) /* # frames 128-255 */ +#define REG_RX_SIZE_256_TO_511(pn) CRA(0x4,pn,0x14) /* # frames 256-511 */ +#define REG_RX_SIZE_512_TO_1023(pn) CRA(0x4,pn,0x15) /* # frames 512-1023 */ +#define REG_RX_SIZE_1024_TO_1518(pn) CRA(0x4,pn,0x16) /* # frames 1024-1518 */ +#define REG_RX_SIZE_1519_TO_MAX(pn) CRA(0x4,pn,0x17) /* # frames 1519-max */ + +#define REG_TX_OUT_BYTES(pn) CRA(0x4,pn,0x18) /* # octets tx */ +#define REG_TX_PAUSE(pn) CRA(0x4,pn,0x19) /* # pause frames sent */ +#define REG_TX_OK_BYTES(pn) CRA(0x4,pn,0x1a) /* # octets tx OK */ +#define REG_TX_UNICAST(pn) CRA(0x4,pn,0x1b) /* # frames unicast */ +#define REG_TX_MULTICAST(pn) CRA(0x4,pn,0x1c) /* # frames multicast */ +#define REG_TX_BROADCAST(pn) CRA(0x4,pn,0x1d) /* # frames broadcast */ +#define REG_TX_MULTIPLE_COLL(pn) CRA(0x4,pn,0x1e) /* # frames tx after multiple collisions */ +#define REG_TX_LATE_COLL(pn) CRA(0x4,pn,0x1f) /* # late collisions detected */ +#define REG_TX_XCOLL(pn) CRA(0x4,pn,0x20) /* # frames lost, excessive collisions */ +#define REG_TX_DEFER(pn) CRA(0x4,pn,0x21) /* # frames deferred on first tx attempt */ +#define REG_TX_XDEFER(pn) CRA(0x4,pn,0x22) /* # frames excessively deferred */ +#define REG_TX_CSENSE(pn) CRA(0x4,pn,0x23) /* carrier sense errors at frame end */ +#define REG_TX_SIZE_64(pn) CRA(0x4,pn,0x24) /* # frames 64 octets long */ +#define REG_TX_SIZE_65_TO_127(pn) CRA(0x4,pn,0x25) /* # frames 65-127 octets */ +#define REG_TX_SIZE_128_TO_255(pn) CRA(0x4,pn,0x26) /* # frames 128-255 */ +#define REG_TX_SIZE_256_TO_511(pn) CRA(0x4,pn,0x27) /* # frames 256-511 */ +#define REG_TX_SIZE_512_TO_1023(pn) CRA(0x4,pn,0x28) /* # frames 512-1023 */ +#define REG_TX_SIZE_1024_TO_1518(pn) CRA(0x4,pn,0x29) /* # frames 1024-1518 */ +#define REG_TX_SIZE_1519_TO_MAX(pn) CRA(0x4,pn,0x2a) /* # frames 1519-max */ +#define REG_TX_SINGLE_COLL(pn) CRA(0x4,pn,0x2b) /* # frames tx after single collision */ +#define REG_TX_BACKOFF2(pn) CRA(0x4,pn,0x2c) /* # frames tx ok after 2 backoffs/collisions */ +#define REG_TX_BACKOFF3(pn) CRA(0x4,pn,0x2d) /* after 3 backoffs/collisions */ +#define REG_TX_BACKOFF4(pn) CRA(0x4,pn,0x2e) /* after 4 */ +#define REG_TX_BACKOFF5(pn) CRA(0x4,pn,0x2f) /* after 5 */ +#define REG_TX_BACKOFF6(pn) CRA(0x4,pn,0x30) /* after 6 */ +#define REG_TX_BACKOFF7(pn) CRA(0x4,pn,0x31) /* after 7 */ +#define REG_TX_BACKOFF8(pn) CRA(0x4,pn,0x32) /* after 8 */ +#define REG_TX_BACKOFF9(pn) CRA(0x4,pn,0x33) /* after 9 */ +#define REG_TX_BACKOFF10(pn) CRA(0x4,pn,0x34) /* after 10 */ +#define REG_TX_BACKOFF11(pn) CRA(0x4,pn,0x35) /* after 11 */ +#define REG_TX_BACKOFF12(pn) CRA(0x4,pn,0x36) /* after 12 */ +#define REG_TX_BACKOFF13(pn) CRA(0x4,pn,0x37) /* after 13 */ +#define REG_TX_BACKOFF14(pn) CRA(0x4,pn,0x38) /* after 14 */ +#define REG_TX_BACKOFF15(pn) CRA(0x4,pn,0x39) /* after 15 */ +#define REG_TX_UNDERRUN(pn) CRA(0x4,pn,0x3a) /* # frames dropped from underrun */ +#define REG_RX_XGMII_PROT_ERR CRA(0x4,0xa,0x3b) /* # protocol errors detected on XGMII interface */ +#define REG_RX_IPG_SHRINK(pn) CRA(0x4,pn,0x3c) /* # of IPG shrinks detected */ + +#define REG_STAT_STICKY1G(pn) CRA(0x4,pn,0x3e) /* tri-speed sticky bits */ +#define REG_STAT_STICKY10G CRA(0x4,0xa,0x3e) /* 10GbE sticky bits */ +#define REG_STAT_INIT(pn) CRA(0x4,pn,0x3f) /* Clear all statistics */ + +/* MII-Management Block registers */ +/* These are for MII-M interface 0, which is the bidirectional LVTTL one. If + * we hooked up to the one with separate directions, the middle 0x0 needs to + * change to 0x1. And the current errata states that MII-M 1 doesn't work. + */ + +#define REG_MIIM_STATUS CRA(0x3,0x0,0x00) /* MII-M Status */ +#define REG_MIIM_CMD CRA(0x3,0x0,0x01) /* MII-M Command */ +#define REG_MIIM_DATA CRA(0x3,0x0,0x02) /* MII-M Data */ +#define REG_MIIM_PRESCALE CRA(0x3,0x0,0x03) /* MII-M MDC Prescale */ + +#define REG_ING_FFILT_UM_EN CRA(0x2, 0, 0xd) +#define REG_ING_FFILT_BE_EN CRA(0x2, 0, 0x1d) +#define REG_ING_FFILT_VAL0 CRA(0x2, 0, 0x2d) +#define REG_ING_FFILT_VAL1 CRA(0x2, 0, 0x3d) +#define REG_ING_FFILT_MASK0 CRA(0x2, 0, 0x4d) +#define REG_ING_FFILT_MASK1 CRA(0x2, 0, 0x5d) +#define REG_ING_FFILT_MASK2 CRA(0x2, 0, 0x6d) +#define REG_ING_FFILT_ETYPE CRA(0x2, 0, 0x7d) + + +/* Whew. */ + +#endif diff --git a/drivers/net/chelsio/vsc8244.c b/drivers/net/chelsio/vsc8244.c new file mode 100644 index 00000000000..c493e783d45 --- /dev/null +++ b/drivers/net/chelsio/vsc8244.c @@ -0,0 +1,368 @@ +/* + * This file is part of the Chelsio T2 Ethernet driver. + * + * Copyright (C) 2005 Chelsio Communications. All rights reserved. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the LICENSE file included in this + * release for licensing terms and conditions. + */ + +#include "common.h" +#include "cphy.h" +#include "elmer0.h" + +#ifndef ADVERTISE_PAUSE_CAP +# define ADVERTISE_PAUSE_CAP 0x400 +#endif +#ifndef ADVERTISE_PAUSE_ASYM +# define ADVERTISE_PAUSE_ASYM 0x800 +#endif + +/* Gigabit MII registers */ +#ifndef MII_CTRL1000 +# define MII_CTRL1000 9 +#endif + +#ifndef ADVERTISE_1000FULL +# define ADVERTISE_1000FULL 0x200 +# define ADVERTISE_1000HALF 0x100 +#endif + +/* VSC8244 PHY specific registers. */ +enum { + VSC8244_INTR_ENABLE = 25, + VSC8244_INTR_STATUS = 26, + VSC8244_AUX_CTRL_STAT = 28, +}; + +enum { + VSC_INTR_RX_ERR = 1 << 0, + VSC_INTR_MS_ERR = 1 << 1, /* master/slave resolution error */ + VSC_INTR_CABLE = 1 << 2, /* cable impairment */ + VSC_INTR_FALSE_CARR = 1 << 3, /* false carrier */ + VSC_INTR_MEDIA_CHG = 1 << 4, /* AMS media change */ + VSC_INTR_RX_FIFO = 1 << 5, /* Rx FIFO over/underflow */ + VSC_INTR_TX_FIFO = 1 << 6, /* Tx FIFO over/underflow */ + VSC_INTR_DESCRAMBL = 1 << 7, /* descrambler lock-lost */ + VSC_INTR_SYMBOL_ERR = 1 << 8, /* symbol error */ + VSC_INTR_NEG_DONE = 1 << 10, /* autoneg done */ + VSC_INTR_NEG_ERR = 1 << 11, /* autoneg error */ + VSC_INTR_LINK_CHG = 1 << 13, /* link change */ + VSC_INTR_ENABLE = 1 << 15, /* interrupt enable */ +}; + +#define CFG_CHG_INTR_MASK (VSC_INTR_LINK_CHG | VSC_INTR_NEG_ERR | \ + VSC_INTR_NEG_DONE) +#define INTR_MASK (CFG_CHG_INTR_MASK | VSC_INTR_TX_FIFO | VSC_INTR_RX_FIFO | \ + VSC_INTR_ENABLE) + +/* PHY specific auxiliary control & status register fields */ +#define S_ACSR_ACTIPHY_TMR 0 +#define M_ACSR_ACTIPHY_TMR 0x3 +#define V_ACSR_ACTIPHY_TMR(x) ((x) << S_ACSR_ACTIPHY_TMR) + +#define S_ACSR_SPEED 3 +#define M_ACSR_SPEED 0x3 +#define G_ACSR_SPEED(x) (((x) >> S_ACSR_SPEED) & M_ACSR_SPEED) + +#define S_ACSR_DUPLEX 5 +#define F_ACSR_DUPLEX (1 << S_ACSR_DUPLEX) + +#define S_ACSR_ACTIPHY 6 +#define F_ACSR_ACTIPHY (1 << S_ACSR_ACTIPHY) + +/* + * Reset the PHY. This PHY completes reset immediately so we never wait. + */ +static int vsc8244_reset(struct cphy *cphy, int wait) +{ + int err; + unsigned int ctl; + + err = simple_mdio_read(cphy, MII_BMCR, &ctl); + if (err) + return err; + + ctl &= ~BMCR_PDOWN; + ctl |= BMCR_RESET; + return simple_mdio_write(cphy, MII_BMCR, ctl); +} + +static int vsc8244_intr_enable(struct cphy *cphy) +{ + simple_mdio_write(cphy, VSC8244_INTR_ENABLE, INTR_MASK); + + /* Enable interrupts through Elmer */ + if (t1_is_asic(cphy->adapter)) { + u32 elmer; + + t1_tpi_read(cphy->adapter, A_ELMER0_INT_ENABLE, &elmer); + elmer |= ELMER0_GP_BIT1; + if (is_T2(cphy->adapter)) { + elmer |= ELMER0_GP_BIT2|ELMER0_GP_BIT3|ELMER0_GP_BIT4; + } + t1_tpi_write(cphy->adapter, A_ELMER0_INT_ENABLE, elmer); + } + + return 0; +} + +static int vsc8244_intr_disable(struct cphy *cphy) +{ + simple_mdio_write(cphy, VSC8244_INTR_ENABLE, 0); + + if (t1_is_asic(cphy->adapter)) { + u32 elmer; + + t1_tpi_read(cphy->adapter, A_ELMER0_INT_ENABLE, &elmer); + elmer &= ~ELMER0_GP_BIT1; + if (is_T2(cphy->adapter)) { + elmer &= ~(ELMER0_GP_BIT2|ELMER0_GP_BIT3|ELMER0_GP_BIT4); + } + t1_tpi_write(cphy->adapter, A_ELMER0_INT_ENABLE, elmer); + } + + return 0; +} + +static int vsc8244_intr_clear(struct cphy *cphy) +{ + u32 val; + u32 elmer; + + /* Clear PHY interrupts by reading the register. */ + simple_mdio_read(cphy, VSC8244_INTR_ENABLE, &val); + + if (t1_is_asic(cphy->adapter)) { + t1_tpi_read(cphy->adapter, A_ELMER0_INT_CAUSE, &elmer); + elmer |= ELMER0_GP_BIT1; + if (is_T2(cphy->adapter)) { + elmer |= ELMER0_GP_BIT2|ELMER0_GP_BIT3|ELMER0_GP_BIT4; + } + t1_tpi_write(cphy->adapter, A_ELMER0_INT_CAUSE, elmer); + } + + return 0; +} + +/* + * Force the PHY speed and duplex. This also disables auto-negotiation, except + * for 1Gb/s, where auto-negotiation is mandatory. + */ +static int vsc8244_set_speed_duplex(struct cphy *phy, int speed, int duplex) +{ + int err; + unsigned int ctl; + + err = simple_mdio_read(phy, MII_BMCR, &ctl); + if (err) + return err; + + if (speed >= 0) { + ctl &= ~(BMCR_SPEED100 | BMCR_SPEED1000 | BMCR_ANENABLE); + if (speed == SPEED_100) + ctl |= BMCR_SPEED100; + else if (speed == SPEED_1000) + ctl |= BMCR_SPEED1000; + } + if (duplex >= 0) { + ctl &= ~(BMCR_FULLDPLX | BMCR_ANENABLE); + if (duplex == DUPLEX_FULL) + ctl |= BMCR_FULLDPLX; + } + if (ctl & BMCR_SPEED1000) /* auto-negotiation required for 1Gb/s */ + ctl |= BMCR_ANENABLE; + return simple_mdio_write(phy, MII_BMCR, ctl); +} + +int t1_mdio_set_bits(struct cphy *phy, int mmd, int reg, unsigned int bits) +{ + int ret; + unsigned int val; + + ret = mdio_read(phy, mmd, reg, &val); + if (!ret) + ret = mdio_write(phy, mmd, reg, val | bits); + return ret; +} + +static int vsc8244_autoneg_enable(struct cphy *cphy) +{ + return t1_mdio_set_bits(cphy, 0, MII_BMCR, + BMCR_ANENABLE | BMCR_ANRESTART); +} + +static int vsc8244_autoneg_restart(struct cphy *cphy) +{ + return t1_mdio_set_bits(cphy, 0, MII_BMCR, BMCR_ANRESTART); +} + +static int vsc8244_advertise(struct cphy *phy, unsigned int advertise_map) +{ + int err; + unsigned int val = 0; + + err = simple_mdio_read(phy, MII_CTRL1000, &val); + if (err) + return err; + + val &= ~(ADVERTISE_1000HALF | ADVERTISE_1000FULL); + if (advertise_map & ADVERTISED_1000baseT_Half) + val |= ADVERTISE_1000HALF; + if (advertise_map & ADVERTISED_1000baseT_Full) + val |= ADVERTISE_1000FULL; + + err = simple_mdio_write(phy, MII_CTRL1000, val); + if (err) + return err; + + val = 1; + if (advertise_map & ADVERTISED_10baseT_Half) + val |= ADVERTISE_10HALF; + if (advertise_map & ADVERTISED_10baseT_Full) + val |= ADVERTISE_10FULL; + if (advertise_map & ADVERTISED_100baseT_Half) + val |= ADVERTISE_100HALF; + if (advertise_map & ADVERTISED_100baseT_Full) + val |= ADVERTISE_100FULL; + if (advertise_map & ADVERTISED_PAUSE) + val |= ADVERTISE_PAUSE_CAP; + if (advertise_map & ADVERTISED_ASYM_PAUSE) + val |= ADVERTISE_PAUSE_ASYM; + return simple_mdio_write(phy, MII_ADVERTISE, val); +} + +static int vsc8244_get_link_status(struct cphy *cphy, int *link_ok, + int *speed, int *duplex, int *fc) +{ + unsigned int bmcr, status, lpa, adv; + int err, sp = -1, dplx = -1, pause = 0; + + err = simple_mdio_read(cphy, MII_BMCR, &bmcr); + if (!err) + err = simple_mdio_read(cphy, MII_BMSR, &status); + if (err) + return err; + + if (link_ok) { + /* + * BMSR_LSTATUS is latch-low, so if it is 0 we need to read it + * once more to get the current link state. + */ + if (!(status & BMSR_LSTATUS)) + err = simple_mdio_read(cphy, MII_BMSR, &status); + if (err) + return err; + *link_ok = (status & BMSR_LSTATUS) != 0; + } + if (!(bmcr & BMCR_ANENABLE)) { + dplx = (bmcr & BMCR_FULLDPLX) ? DUPLEX_FULL : DUPLEX_HALF; + if (bmcr & BMCR_SPEED1000) + sp = SPEED_1000; + else if (bmcr & BMCR_SPEED100) + sp = SPEED_100; + else + sp = SPEED_10; + } else if (status & BMSR_ANEGCOMPLETE) { + err = simple_mdio_read(cphy, VSC8244_AUX_CTRL_STAT, &status); + if (err) + return err; + + dplx = (status & F_ACSR_DUPLEX) ? DUPLEX_FULL : DUPLEX_HALF; + sp = G_ACSR_SPEED(status); + if (sp == 0) + sp = SPEED_10; + else if (sp == 1) + sp = SPEED_100; + else + sp = SPEED_1000; + + if (fc && dplx == DUPLEX_FULL) { + err = simple_mdio_read(cphy, MII_LPA, &lpa); + if (!err) + err = simple_mdio_read(cphy, MII_ADVERTISE, + &adv); + if (err) + return err; + + if (lpa & adv & ADVERTISE_PAUSE_CAP) + pause = PAUSE_RX | PAUSE_TX; + else if ((lpa & ADVERTISE_PAUSE_CAP) && + (lpa & ADVERTISE_PAUSE_ASYM) && + (adv & ADVERTISE_PAUSE_ASYM)) + pause = PAUSE_TX; + else if ((lpa & ADVERTISE_PAUSE_ASYM) && + (adv & ADVERTISE_PAUSE_CAP)) + pause = PAUSE_RX; + } + } + if (speed) + *speed = sp; + if (duplex) + *duplex = dplx; + if (fc) + *fc = pause; + return 0; +} + +static int vsc8244_intr_handler(struct cphy *cphy) +{ + unsigned int cause; + int err, cphy_cause = 0; + + err = simple_mdio_read(cphy, VSC8244_INTR_STATUS, &cause); + if (err) + return err; + + cause &= INTR_MASK; + if (cause & CFG_CHG_INTR_MASK) + cphy_cause |= cphy_cause_link_change; + if (cause & (VSC_INTR_RX_FIFO | VSC_INTR_TX_FIFO)) + cphy_cause |= cphy_cause_fifo_error; + return cphy_cause; +} + +static void vsc8244_destroy(struct cphy *cphy) +{ + kfree(cphy); +} + +static struct cphy_ops vsc8244_ops = { + .destroy = vsc8244_destroy, + .reset = vsc8244_reset, + .interrupt_enable = vsc8244_intr_enable, + .interrupt_disable = vsc8244_intr_disable, + .interrupt_clear = vsc8244_intr_clear, + .interrupt_handler = vsc8244_intr_handler, + .autoneg_enable = vsc8244_autoneg_enable, + .autoneg_restart = vsc8244_autoneg_restart, + .advertise = vsc8244_advertise, + .set_speed_duplex = vsc8244_set_speed_duplex, + .get_link_status = vsc8244_get_link_status +}; + +static struct cphy* vsc8244_phy_create(adapter_t *adapter, int phy_addr, struct mdio_ops *mdio_ops) +{ + struct cphy *cphy = kzalloc(sizeof(*cphy), GFP_KERNEL); + + if (!cphy) return NULL; + + cphy_init(cphy, adapter, phy_addr, &vsc8244_ops, mdio_ops); + + return cphy; +} + + +static int vsc8244_phy_reset(adapter_t* adapter) +{ + return 0; +} + +struct gphy t1_vsc8244_ops = { + vsc8244_phy_create, + vsc8244_phy_reset +}; + + diff --git a/drivers/net/chelsio/vsc8244_reg.h b/drivers/net/chelsio/vsc8244_reg.h new file mode 100644 index 00000000000..d3c1829055c --- /dev/null +++ b/drivers/net/chelsio/vsc8244_reg.h @@ -0,0 +1,172 @@ +/* $Date: 2005/11/23 16:28:53 $ $RCSfile: vsc8244_reg.h,v $ $Revision: 1.1 $ */ +#ifndef CHELSIO_MV8E1XXX_H +#define CHELSIO_MV8E1XXX_H + +#ifndef BMCR_SPEED1000 +# define BMCR_SPEED1000 0x40 +#endif + +#ifndef ADVERTISE_PAUSE +# define ADVERTISE_PAUSE 0x400 +#endif +#ifndef ADVERTISE_PAUSE_ASYM +# define ADVERTISE_PAUSE_ASYM 0x800 +#endif + +/* Gigabit MII registers */ +#define MII_GBMR 1 /* 1000Base-T mode register */ +#define MII_GBCR 9 /* 1000Base-T control register */ +#define MII_GBSR 10 /* 1000Base-T status register */ + +/* 1000Base-T control register fields */ +#define GBCR_ADV_1000HALF 0x100 +#define GBCR_ADV_1000FULL 0x200 +#define GBCR_PREFER_MASTER 0x400 +#define GBCR_MANUAL_AS_MASTER 0x800 +#define GBCR_MANUAL_CONFIG_ENABLE 0x1000 + +/* 1000Base-T status register fields */ +#define GBSR_LP_1000HALF 0x400 +#define GBSR_LP_1000FULL 0x800 +#define GBSR_REMOTE_OK 0x1000 +#define GBSR_LOCAL_OK 0x2000 +#define GBSR_LOCAL_MASTER 0x4000 +#define GBSR_MASTER_FAULT 0x8000 + +/* Vitesse PHY interrupt status bits. */ +#if 0 +#define VSC8244_INTR_JABBER 0x0001 +#define VSC8244_INTR_POLARITY_CHNG 0x0002 +#define VSC8244_INTR_ENG_DETECT_CHNG 0x0010 +#define VSC8244_INTR_DOWNSHIFT 0x0020 +#define VSC8244_INTR_MDI_XOVER_CHNG 0x0040 +#define VSC8244_INTR_FIFO_OVER_UNDER 0x0080 +#define VSC8244_INTR_FALSE_CARRIER 0x0100 +#define VSC8244_INTR_SYMBOL_ERROR 0x0200 +#define VSC8244_INTR_LINK_CHNG 0x0400 +#define VSC8244_INTR_AUTONEG_DONE 0x0800 +#define VSC8244_INTR_PAGE_RECV 0x1000 +#define VSC8244_INTR_DUPLEX_CHNG 0x2000 +#define VSC8244_INTR_SPEED_CHNG 0x4000 +#define VSC8244_INTR_AUTONEG_ERR 0x8000 +#else +//#define VSC8244_INTR_JABBER 0x0001 +//#define VSC8244_INTR_POLARITY_CHNG 0x0002 +//#define VSC8244_INTR_BIT2 0x0004 +//#define VSC8244_INTR_BIT3 0x0008 +#define VSC8244_INTR_RX_ERR 0x0001 +#define VSC8244_INTR_MASTER_SLAVE 0x0002 +#define VSC8244_INTR_CABLE_IMPAIRED 0x0004 +#define VSC8244_INTR_FALSE_CARRIER 0x0008 +//#define VSC8244_INTR_ENG_DETECT_CHNG 0x0010 +//#define VSC8244_INTR_DOWNSHIFT 0x0020 +//#define VSC8244_INTR_MDI_XOVER_CHNG 0x0040 +//#define VSC8244_INTR_FIFO_OVER_UNDER 0x0080 +#define VSC8244_INTR_BIT4 0x0010 +#define VSC8244_INTR_FIFO_RX 0x0020 +#define VSC8244_INTR_FIFO_OVER_UNDER 0x0040 +#define VSC8244_INTR_LOCK_LOST 0x0080 +//#define VSC8244_INTR_FALSE_CARRIER 0x0100 +//#define VSC8244_INTR_SYMBOL_ERROR 0x0200 +//#define VSC8244_INTR_LINK_CHNG 0x0400 +//#define VSC8244_INTR_AUTONEG_DONE 0x0800 +#define VSC8244_INTR_SYMBOL_ERROR 0x0100 +#define VSC8244_INTR_ENG_DETECT_CHNG 0x0200 +#define VSC8244_INTR_AUTONEG_DONE 0x0400 +#define VSC8244_INTR_AUTONEG_ERR 0x0800 +//#define VSC8244_INTR_PAGE_RECV 0x1000 +//#define VSC8244_INTR_DUPLEX_CHNG 0x2000 +//#define VSC8244_INTR_SPEED_CHNG 0x4000 +//#define VSC8244_INTR_AUTONEG_ERR 0x8000 +#define VSC8244_INTR_DUPLEX_CHNG 0x1000 +#define VSC8244_INTR_LINK_CHNG 0x2000 +#define VSC8244_INTR_SPEED_CHNG 0x4000 +#define VSC8244_INTR_STATUS 0x8000 +#endif + + +/* Vitesse PHY specific registers. */ +#define VSC8244_SPECIFIC_CNTRL_REGISTER 16 +#define VSC8244_SPECIFIC_STATUS_REGISTER 0x1c +#define VSC8244_INTERRUPT_ENABLE_REGISTER 0x19 +#define VSC8244_INTERRUPT_STATUS_REGISTER 0x1a +#define VSC8244_EXT_PHY_SPECIFIC_CNTRL_REGISTER 20 +#define VSC8244_RECV_ERR_CNTR_REGISTER 21 +#define VSC8244_RES_REGISTER 22 +#define VSC8244_GLOBAL_STATUS_REGISTER 23 +#define VSC8244_LED_CONTROL_REGISTER 24 +#define VSC8244_MANUAL_LED_OVERRIDE_REGISTER 25 +#define VSC8244_EXT_PHY_SPECIFIC_CNTRL_2_REGISTER 26 +#define VSC8244_EXT_PHY_SPECIFIC_STATUS_REGISTER 27 +#define VSC8244_VIRTUAL_CABLE_TESTER_REGISTER 28 +#define VSC8244_EXTENDED_ADDR_REGISTER 29 +#define VSC8244_EXTENDED_REGISTER 30 + +/* PHY specific control register fields */ +#define S_PSCR_MDI_XOVER_MODE 5 +#define M_PSCR_MDI_XOVER_MODE 0x3 +#define V_PSCR_MDI_XOVER_MODE(x) ((x) << S_PSCR_MDI_XOVER_MODE) +#define G_PSCR_MDI_XOVER_MODE(x) (((x) >> S_PSCR_MDI_XOVER_MODE) & M_PSCR_MDI_XOVER_MODE) + +/* Extended PHY specific control register fields */ +#define S_DOWNSHIFT_ENABLE 8 +#define V_DOWNSHIFT_ENABLE (1 << S_DOWNSHIFT_ENABLE) + +#define S_DOWNSHIFT_CNT 9 +#define M_DOWNSHIFT_CNT 0x7 +#define V_DOWNSHIFT_CNT(x) ((x) << S_DOWNSHIFT_CNT) +#define G_DOWNSHIFT_CNT(x) (((x) >> S_DOWNSHIFT_CNT) & M_DOWNSHIFT_CNT) + +/* PHY specific status register fields */ +#define S_PSSR_JABBER 0 +#define V_PSSR_JABBER (1 << S_PSSR_JABBER) + +#define S_PSSR_POLARITY 1 +#define V_PSSR_POLARITY (1 << S_PSSR_POLARITY) + +#define S_PSSR_RX_PAUSE 2 +#define V_PSSR_RX_PAUSE (1 << S_PSSR_RX_PAUSE) + +#define S_PSSR_TX_PAUSE 3 +#define V_PSSR_TX_PAUSE (1 << S_PSSR_TX_PAUSE) + +#define S_PSSR_ENERGY_DETECT 4 +#define V_PSSR_ENERGY_DETECT (1 << S_PSSR_ENERGY_DETECT) + +#define S_PSSR_DOWNSHIFT_STATUS 5 +#define V_PSSR_DOWNSHIFT_STATUS (1 << S_PSSR_DOWNSHIFT_STATUS) + +#define S_PSSR_MDI 6 +#define V_PSSR_MDI (1 << S_PSSR_MDI) + +#define S_PSSR_CABLE_LEN 7 +#define M_PSSR_CABLE_LEN 0x7 +#define V_PSSR_CABLE_LEN(x) ((x) << S_PSSR_CABLE_LEN) +#define G_PSSR_CABLE_LEN(x) (((x) >> S_PSSR_CABLE_LEN) & M_PSSR_CABLE_LEN) + +//#define S_PSSR_LINK 10 +//#define S_PSSR_LINK 13 +#define S_PSSR_LINK 2 +#define V_PSSR_LINK (1 << S_PSSR_LINK) + +//#define S_PSSR_STATUS_RESOLVED 11 +//#define S_PSSR_STATUS_RESOLVED 10 +#define S_PSSR_STATUS_RESOLVED 15 +#define V_PSSR_STATUS_RESOLVED (1 << S_PSSR_STATUS_RESOLVED) + +#define S_PSSR_PAGE_RECEIVED 12 +#define V_PSSR_PAGE_RECEIVED (1 << S_PSSR_PAGE_RECEIVED) + +//#define S_PSSR_DUPLEX 13 +//#define S_PSSR_DUPLEX 12 +#define S_PSSR_DUPLEX 5 +#define V_PSSR_DUPLEX (1 << S_PSSR_DUPLEX) + +//#define S_PSSR_SPEED 14 +//#define S_PSSR_SPEED 14 +#define S_PSSR_SPEED 3 +#define M_PSSR_SPEED 0x3 +#define V_PSSR_SPEED(x) ((x) << S_PSSR_SPEED) +#define G_PSSR_SPEED(x) (((x) >> S_PSSR_SPEED) & M_PSSR_SPEED) + +#endif diff --git a/drivers/net/cs89x0.c b/drivers/net/cs89x0.c index 4ffc9b44a8e..dec70c2b374 100644 --- a/drivers/net/cs89x0.c +++ b/drivers/net/cs89x0.c @@ -588,10 +588,10 @@ cs89x0_probe1(struct net_device *dev, int ioaddr, int modular) goto out2; } } - printk(KERN_DEBUG "PP_addr at %x[%x]: 0x%x\n", - ioaddr, ADD_PORT, readword(ioaddr, ADD_PORT)); ioaddr &= ~3; + printk(KERN_DEBUG "PP_addr at %x[%x]: 0x%x\n", + ioaddr, ADD_PORT, readword(ioaddr, ADD_PORT)); writeword(ioaddr, ADD_PORT, PP_ChipID); tmp = readword(ioaddr, DATA_PORT); diff --git a/drivers/net/defxx.c b/drivers/net/defxx.c index 8f514cc0deb..dc3ab3b5c8c 100644 --- a/drivers/net/defxx.c +++ b/drivers/net/defxx.c @@ -192,6 +192,7 @@ * 04 Aug 2003 macro Converted to the DMA API. * 14 Aug 2004 macro Fix device names reported. * 14 Jun 2005 macro Use irqreturn_t. + * 23 Oct 2006 macro Big-endian host support. */ /* Include files */ @@ -218,8 +219,8 @@ /* Version information string should be updated prior to each new release! */ #define DRV_NAME "defxx" -#define DRV_VERSION "v1.08" -#define DRV_RELDATE "2005/06/14" +#define DRV_VERSION "v1.09" +#define DRV_RELDATE "2006/10/23" static char version[] __devinitdata = DRV_NAME ": " DRV_VERSION " " DRV_RELDATE @@ -859,6 +860,7 @@ static int __devinit dfx_driver_init(struct net_device *dev, print_name); return(DFX_K_FAILURE); } + data = cpu_to_le32(data); memcpy(&bp->factory_mac_addr[0], &data, sizeof(u32)); if (dfx_hw_port_ctrl_req(bp, PI_PCTRL_M_MLA, PI_PDATA_A_MLA_K_HI, 0, @@ -867,6 +869,7 @@ static int __devinit dfx_driver_init(struct net_device *dev, print_name); return(DFX_K_FAILURE); } + data = cpu_to_le32(data); memcpy(&bp->factory_mac_addr[4], &data, sizeof(u16)); /* @@ -1085,27 +1088,23 @@ static int dfx_adap_init(DFX_board_t *bp, int get_buffers) } /* - * Set base address of Descriptor Block and bring adapter to DMA_AVAILABLE state + * Set the base address of Descriptor Block and bring adapter + * to DMA_AVAILABLE state. * - * Note: We also set the literal and data swapping requirements in this - * command. Since this driver presently runs on Intel platforms - * which are Little Endian, we'll tell the adapter to byte swap - * data only. This code will need to change when we support - * Big Endian systems (eg. PowerPC). + * Note: We also set the literal and data swapping requirements + * in this command. * - * Assumption: 32-bit physical address of descriptor block is 8Kbyte - * aligned. That is, bits 0-12 of the address must be zero. + * Assumption: 32-bit physical address of descriptor block + * is 8Kbyte aligned. */ - - if (dfx_hw_port_ctrl_req(bp, - PI_PCTRL_M_INIT, - (u32) (bp->descr_block_phys | PI_PDATA_A_INIT_M_BSWAP_DATA), - 0, - NULL) != DFX_K_SUCCESS) - { - printk("%s: Could not set descriptor block address!\n", bp->dev->name); - return(DFX_K_FAILURE); - } + if (dfx_hw_port_ctrl_req(bp, PI_PCTRL_M_INIT, + (u32)(bp->descr_block_phys | + PI_PDATA_A_INIT_M_BSWAP_INIT), + 0, NULL) != DFX_K_SUCCESS) { + printk("%s: Could not set descriptor block address!\n", + bp->dev->name); + return DFX_K_FAILURE; + } /* Set transmit flush timeout value */ diff --git a/drivers/net/defxx.h b/drivers/net/defxx.h index 8b1e9a11ca2..2ce8f97253e 100644 --- a/drivers/net/defxx.h +++ b/drivers/net/defxx.h @@ -25,6 +25,7 @@ * macros to DEFXX.C. * 12-Sep-96 LVS Removed packet request header pointers. * 04 Aug 2003 macro Converted to the DMA API. + * 23 Oct 2006 macro Big-endian host support. */ #ifndef _DEFXX_H_ @@ -1344,7 +1345,7 @@ typedef struct /* Register definition structures are defined for both big and little endian systems */ -#ifndef BIG_ENDIAN +#ifndef __BIG_ENDIAN /* Little endian format of Type 1 Producer register */ @@ -1402,7 +1403,11 @@ typedef union } index; } PI_TYPE_2_CONSUMER; -#else +/* Define swapping required by DMA transfers. */ +#define PI_PDATA_A_INIT_M_BSWAP_INIT \ + (PI_PDATA_A_INIT_M_BSWAP_DATA) + +#else /* __BIG_ENDIAN */ /* Big endian format of Type 1 Producer register */ @@ -1460,7 +1465,11 @@ typedef union } index; } PI_TYPE_2_CONSUMER; -#endif /* #ifndef BIG_ENDIAN */ +/* Define swapping required by DMA transfers. */ +#define PI_PDATA_A_INIT_M_BSWAP_INIT \ + (PI_PDATA_A_INIT_M_BSWAP_DATA | PI_PDATA_A_INIT_M_BSWAP_LITERAL) + +#endif /* __BIG_ENDIAN */ /* Define EISA controller register offsets */ diff --git a/drivers/net/depca.c b/drivers/net/depca.c index f87f6e3dc72..5113eef755b 100644 --- a/drivers/net/depca.c +++ b/drivers/net/depca.c @@ -1252,24 +1252,22 @@ static void set_multicast_list(struct net_device *dev) struct depca_private *lp = (struct depca_private *) dev->priv; u_long ioaddr = dev->base_addr; - if (dev) { - netif_stop_queue(dev); - while (lp->tx_old != lp->tx_new); /* Wait for the ring to empty */ - - STOP_DEPCA; /* Temporarily stop the depca. */ - depca_init_ring(dev); /* Initialize the descriptor rings */ + netif_stop_queue(dev); + while (lp->tx_old != lp->tx_new); /* Wait for the ring to empty */ - if (dev->flags & IFF_PROMISC) { /* Set promiscuous mode */ - lp->init_block.mode |= PROM; - } else { - SetMulticastFilter(dev); - lp->init_block.mode &= ~PROM; /* Unset promiscuous mode */ - } + STOP_DEPCA; /* Temporarily stop the depca. */ + depca_init_ring(dev); /* Initialize the descriptor rings */ - LoadCSRs(dev); /* Reload CSR3 */ - InitRestartDepca(dev); /* Resume normal operation. */ - netif_start_queue(dev); /* Unlock the TX ring */ + if (dev->flags & IFF_PROMISC) { /* Set promiscuous mode */ + lp->init_block.mode |= PROM; + } else { + SetMulticastFilter(dev); + lp->init_block.mode &= ~PROM; /* Unset promiscuous mode */ } + + LoadCSRs(dev); /* Reload CSR3 */ + InitRestartDepca(dev); /* Resume normal operation. */ + netif_start_queue(dev); /* Unlock the TX ring */ } /* diff --git a/drivers/net/e100.c b/drivers/net/e100.c index e7737d02bb0..03bf164f9e8 100644 --- a/drivers/net/e100.c +++ b/drivers/net/e100.c @@ -1215,7 +1215,7 @@ static void e100_setup_ucode(struct nic *nic, struct cb *cb, struct sk_buff *skb * the literal in the instruction before the code is loaded, the * driver can change the algorithm. * -* INTDELAY - This loads the dead-man timer with its inital value. +* INTDELAY - This loads the dead-man timer with its initial value. * When this timer expires the interrupt is asserted, and the * timer is reset each time a new packet is received. (see * BUNDLEMAX below to set the limit on number of chained packets) diff --git a/drivers/net/e1000/e1000.h b/drivers/net/e1000/e1000.h index 7ecce438d25..f091042b146 100644 --- a/drivers/net/e1000/e1000.h +++ b/drivers/net/e1000/e1000.h @@ -59,6 +59,9 @@ #include <linux/capability.h> #include <linux/in.h> #include <linux/ip.h> +#ifdef NETIF_F_TSO6 +#include <linux/ipv6.h> +#endif #include <linux/tcp.h> #include <linux/udp.h> #include <net/pkt_sched.h> @@ -254,6 +257,17 @@ struct e1000_adapter { spinlock_t tx_queue_lock; #endif atomic_t irq_sem; + unsigned int detect_link; + unsigned int total_tx_bytes; + unsigned int total_tx_packets; + unsigned int total_rx_bytes; + unsigned int total_rx_packets; + /* Interrupt Throttle Rate */ + uint32_t itr; + uint32_t itr_setting; + uint16_t tx_itr; + uint16_t rx_itr; + struct work_struct reset_task; uint8_t fc_autoneg; @@ -262,6 +276,7 @@ struct e1000_adapter { /* TX */ struct e1000_tx_ring *tx_ring; /* One per active queue */ + unsigned int restart_queue; unsigned long tx_queue_len; uint32_t txd_cmd; uint32_t tx_int_delay; @@ -310,8 +325,6 @@ struct e1000_adapter { uint64_t gorcl_old; uint16_t rx_ps_bsize0; - /* Interrupt Throttle Rate */ - uint32_t itr; /* OS defined structs */ struct net_device *netdev; diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c index c564adbd669..da459f7177c 100644 --- a/drivers/net/e1000/e1000_ethtool.c +++ b/drivers/net/e1000/e1000_ethtool.c @@ -85,6 +85,7 @@ static const struct e1000_stats e1000_gstrings_stats[] = { { "tx_single_coll_ok", E1000_STAT(stats.scc) }, { "tx_multi_coll_ok", E1000_STAT(stats.mcc) }, { "tx_timeout_count", E1000_STAT(tx_timeout_count) }, + { "tx_restart_queue", E1000_STAT(restart_queue) }, { "rx_long_length_errors", E1000_STAT(stats.roc) }, { "rx_short_length_errors", E1000_STAT(stats.ruc) }, { "rx_align_errors", E1000_STAT(stats.algnerrc) }, @@ -133,9 +134,7 @@ e1000_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd) if (hw->autoneg == 1) { ecmd->advertising |= ADVERTISED_Autoneg; - /* the e1000 autoneg seems to match ethtool nicely */ - ecmd->advertising |= hw->autoneg_advertised; } @@ -285,7 +284,7 @@ e1000_set_pauseparam(struct net_device *netdev, e1000_reset(adapter); } else retval = ((hw->media_type == e1000_media_type_fiber) ? - e1000_setup_link(hw) : e1000_force_mac_fc(hw)); + e1000_setup_link(hw) : e1000_force_mac_fc(hw)); clear_bit(__E1000_RESETTING, &adapter->flags); return retval; @@ -350,6 +349,13 @@ e1000_set_tso(struct net_device *netdev, uint32_t data) else netdev->features &= ~NETIF_F_TSO; +#ifdef NETIF_F_TSO6 + if (data) + netdev->features |= NETIF_F_TSO6; + else + netdev->features &= ~NETIF_F_TSO6; +#endif + DPRINTK(PROBE, INFO, "TSO is %s\n", data ? "Enabled" : "Disabled"); adapter->tso_force = TRUE; return 0; @@ -774,7 +780,7 @@ e1000_reg_test(struct e1000_adapter *adapter, uint64_t *data) /* The status register is Read Only, so a write should fail. * Some bits that get toggled are ignored. */ - switch (adapter->hw.mac_type) { + switch (adapter->hw.mac_type) { /* there are several bits on newer hardware that are r/w */ case e1000_82571: case e1000_82572: @@ -802,12 +808,14 @@ e1000_reg_test(struct e1000_adapter *adapter, uint64_t *data) } /* restore previous status */ E1000_WRITE_REG(&adapter->hw, STATUS, before); + if (adapter->hw.mac_type != e1000_ich8lan) { REG_PATTERN_TEST(FCAL, 0xFFFFFFFF, 0xFFFFFFFF); REG_PATTERN_TEST(FCAH, 0x0000FFFF, 0xFFFFFFFF); REG_PATTERN_TEST(FCT, 0x0000FFFF, 0xFFFFFFFF); REG_PATTERN_TEST(VET, 0x0000FFFF, 0xFFFFFFFF); } + REG_PATTERN_TEST(RDTR, 0x0000FFFF, 0xFFFFFFFF); REG_PATTERN_TEST(RDBAH, 0xFFFFFFFF, 0xFFFFFFFF); REG_PATTERN_TEST(RDLEN, 0x000FFF80, 0x000FFFFF); @@ -820,8 +828,9 @@ e1000_reg_test(struct e1000_adapter *adapter, uint64_t *data) REG_PATTERN_TEST(TDLEN, 0x000FFF80, 0x000FFFFF); REG_SET_AND_CHECK(RCTL, 0xFFFFFFFF, 0x00000000); + before = (adapter->hw.mac_type == e1000_ich8lan ? - 0x06C3B33E : 0x06DFB3FE); + 0x06C3B33E : 0x06DFB3FE); REG_SET_AND_CHECK(RCTL, before, 0x003FFFFB); REG_SET_AND_CHECK(TCTL, 0xFFFFFFFF, 0x00000000); @@ -834,10 +843,10 @@ e1000_reg_test(struct e1000_adapter *adapter, uint64_t *data) REG_PATTERN_TEST(TDBAL, 0xFFFFFFF0, 0xFFFFFFFF); REG_PATTERN_TEST(TIDV, 0x0000FFFF, 0x0000FFFF); value = (adapter->hw.mac_type == e1000_ich8lan ? - E1000_RAR_ENTRIES_ICH8LAN : E1000_RAR_ENTRIES); + E1000_RAR_ENTRIES_ICH8LAN : E1000_RAR_ENTRIES); for (i = 0; i < value; i++) { REG_PATTERN_TEST(RA + (((i << 1) + 1) << 2), 0x8003FFFF, - 0xFFFFFFFF); + 0xFFFFFFFF); } } else { @@ -883,8 +892,7 @@ e1000_eeprom_test(struct e1000_adapter *adapter, uint64_t *data) } static irqreturn_t -e1000_test_intr(int irq, - void *data) +e1000_test_intr(int irq, void *data) { struct net_device *netdev = (struct net_device *) data; struct e1000_adapter *adapter = netdev_priv(netdev); @@ -905,11 +913,11 @@ e1000_intr_test(struct e1000_adapter *adapter, uint64_t *data) /* NOTE: we don't test MSI interrupts here, yet */ /* Hook up test interrupt handler just for this test */ - if (!request_irq(irq, &e1000_test_intr, IRQF_PROBE_SHARED, - netdev->name, netdev)) + if (!request_irq(irq, &e1000_test_intr, IRQF_PROBE_SHARED, netdev->name, + netdev)) shared_int = FALSE; else if (request_irq(irq, &e1000_test_intr, IRQF_SHARED, - netdev->name, netdev)) { + netdev->name, netdev)) { *data = 1; return -1; } @@ -925,6 +933,7 @@ e1000_intr_test(struct e1000_adapter *adapter, uint64_t *data) if (adapter->hw.mac_type == e1000_ich8lan && i == 8) continue; + /* Interrupt to test */ mask = 1 << i; @@ -1674,7 +1683,7 @@ e1000_diag_test(struct net_device *netdev, if (e1000_link_test(adapter, &data[4])) eth_test->flags |= ETH_TEST_FL_FAILED; - /* Offline tests aren't run; pass by default */ + /* Online tests aren't run; pass by default */ data[0] = 0; data[1] = 0; data[2] = 0; @@ -1717,6 +1726,7 @@ static int e1000_wol_exclusion(struct e1000_adapter *adapter, struct ethtool_wol retval = 0; break; case E1000_DEV_ID_82571EB_QUAD_COPPER: + case E1000_DEV_ID_82571EB_QUAD_COPPER_LOWPROFILE: case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3: /* quad port adapters only support WoL on port A */ if (!adapter->quad_port_a) { diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c index 65077f39da6..3655d902b0b 100644 --- a/drivers/net/e1000/e1000_hw.c +++ b/drivers/net/e1000/e1000_hw.c @@ -385,6 +385,7 @@ e1000_set_mac_type(struct e1000_hw *hw) case E1000_DEV_ID_82571EB_FIBER: case E1000_DEV_ID_82571EB_SERDES: case E1000_DEV_ID_82571EB_QUAD_COPPER: + case E1000_DEV_ID_82571EB_QUAD_COPPER_LOWPROFILE: hw->mac_type = e1000_82571; break; case E1000_DEV_ID_82572EI_COPPER: @@ -408,6 +409,8 @@ e1000_set_mac_type(struct e1000_hw *hw) case E1000_DEV_ID_ICH8_IGP_AMT: case E1000_DEV_ID_ICH8_IGP_C: case E1000_DEV_ID_ICH8_IFE: + case E1000_DEV_ID_ICH8_IFE_GT: + case E1000_DEV_ID_ICH8_IFE_G: case E1000_DEV_ID_ICH8_IGP_M: hw->mac_type = e1000_ich8lan; break; @@ -2367,6 +2370,7 @@ e1000_phy_force_speed_duplex(struct e1000_hw *hw) /* Need to reset the PHY or these changes will be ignored */ mii_ctrl_reg |= MII_CR_RESET; + /* Disable MDI-X support for 10/100 */ } else if (hw->phy_type == e1000_phy_ife) { ret_val = e1000_read_phy_reg(hw, IFE_PHY_MDIX_CONTROL, &phy_data); @@ -2379,6 +2383,7 @@ e1000_phy_force_speed_duplex(struct e1000_hw *hw) ret_val = e1000_write_phy_reg(hw, IFE_PHY_MDIX_CONTROL, phy_data); if (ret_val) return ret_val; + } else { /* Clear Auto-Crossover to force MDI manually. IGP requires MDI * forced whenever speed or duplex are forced. @@ -3868,7 +3873,7 @@ e1000_phy_hw_reset(struct e1000_hw *hw) * * hw - Struct containing variables accessed by shared code * -* Sets bit 15 of the MII Control regiser +* Sets bit 15 of the MII Control register ******************************************************************************/ int32_t e1000_phy_reset(struct e1000_hw *hw) @@ -3940,14 +3945,15 @@ e1000_phy_powerdown_workaround(struct e1000_hw *hw) E1000_WRITE_REG(hw, PHY_CTRL, reg | E1000_PHY_CTRL_GBE_DISABLE | E1000_PHY_CTRL_NOND0A_GBE_DISABLE); - /* Write VR power-down enable */ + /* Write VR power-down enable - bits 9:8 should be 10b */ e1000_read_phy_reg(hw, IGP3_VR_CTRL, &phy_data); - e1000_write_phy_reg(hw, IGP3_VR_CTRL, phy_data | - IGP3_VR_CTRL_MODE_SHUT); + phy_data |= (1 << 9); + phy_data &= ~(1 << 8); + e1000_write_phy_reg(hw, IGP3_VR_CTRL, phy_data); /* Read it back and test */ e1000_read_phy_reg(hw, IGP3_VR_CTRL, &phy_data); - if ((phy_data & IGP3_VR_CTRL_MODE_SHUT) || retry) + if (((phy_data & IGP3_VR_CTRL_MODE_MASK) == IGP3_VR_CTRL_MODE_SHUT) || retry) break; /* Issue PHY reset and repeat at most one more time */ @@ -4549,7 +4555,7 @@ e1000_init_eeprom_params(struct e1000_hw *hw) case e1000_ich8lan: { int32_t i = 0; - uint32_t flash_size = E1000_READ_ICH8_REG(hw, ICH8_FLASH_GFPREG); + uint32_t flash_size = E1000_READ_ICH_FLASH_REG(hw, ICH_FLASH_GFPREG); eeprom->type = e1000_eeprom_ich8; eeprom->use_eerd = FALSE; @@ -4565,12 +4571,14 @@ e1000_init_eeprom_params(struct e1000_hw *hw) } } - hw->flash_base_addr = (flash_size & ICH8_GFPREG_BASE_MASK) * - ICH8_FLASH_SECTOR_SIZE; + hw->flash_base_addr = (flash_size & ICH_GFPREG_BASE_MASK) * + ICH_FLASH_SECTOR_SIZE; + + hw->flash_bank_size = ((flash_size >> 16) & ICH_GFPREG_BASE_MASK) + 1; + hw->flash_bank_size -= (flash_size & ICH_GFPREG_BASE_MASK); + + hw->flash_bank_size *= ICH_FLASH_SECTOR_SIZE; - hw->flash_bank_size = ((flash_size >> 16) & ICH8_GFPREG_BASE_MASK) + 1; - hw->flash_bank_size -= (flash_size & ICH8_GFPREG_BASE_MASK); - hw->flash_bank_size *= ICH8_FLASH_SECTOR_SIZE; hw->flash_bank_size /= 2 * sizeof(uint16_t); break; @@ -5620,8 +5628,8 @@ e1000_commit_shadow_ram(struct e1000_hw *hw) * signature is valid. We want to do this after the write * has completed so that we don't mark the segment valid * while the write is still in progress */ - if (i == E1000_ICH8_NVM_SIG_WORD) - high_byte = E1000_ICH8_NVM_SIG_MASK | high_byte; + if (i == E1000_ICH_NVM_SIG_WORD) + high_byte = E1000_ICH_NVM_SIG_MASK | high_byte; error = e1000_verify_write_ich8_byte(hw, (i << 1) + new_bank_offset + 1, high_byte); @@ -5643,18 +5651,18 @@ e1000_commit_shadow_ram(struct e1000_hw *hw) * erase as well since these bits are 11 to start with * and we need to change bit 14 to 0b */ e1000_read_ich8_byte(hw, - E1000_ICH8_NVM_SIG_WORD * 2 + 1 + new_bank_offset, + E1000_ICH_NVM_SIG_WORD * 2 + 1 + new_bank_offset, &high_byte); high_byte &= 0xBF; error = e1000_verify_write_ich8_byte(hw, - E1000_ICH8_NVM_SIG_WORD * 2 + 1 + new_bank_offset, high_byte); + E1000_ICH_NVM_SIG_WORD * 2 + 1 + new_bank_offset, high_byte); /* And invalidate the previously valid segment by setting * its signature word (0x13) high_byte to 0b. This can be * done without an erase because flash erase sets all bits * to 1's. We can write 1's to 0's without an erase */ if (error == E1000_SUCCESS) { error = e1000_verify_write_ich8_byte(hw, - E1000_ICH8_NVM_SIG_WORD * 2 + 1 + old_bank_offset, 0); + E1000_ICH_NVM_SIG_WORD * 2 + 1 + old_bank_offset, 0); } /* Clear the now not used entry in the cache */ @@ -5841,6 +5849,7 @@ e1000_mta_set(struct e1000_hw *hw, hash_reg = (hash_value >> 5) & 0x7F; if (hw->mac_type == e1000_ich8lan) hash_reg &= 0x1F; + hash_bit = hash_value & 0x1F; mta = E1000_READ_REG_ARRAY(hw, MTA, hash_reg); @@ -6026,6 +6035,7 @@ e1000_id_led_init(struct e1000_hw * hw) else eeprom_data = ID_LED_DEFAULT; } + for (i = 0; i < 4; i++) { temp = (eeprom_data >> (i << 2)) & led_mask; switch (temp) { @@ -8486,7 +8496,7 @@ e1000_ich8_cycle_init(struct e1000_hw *hw) DEBUGFUNC("e1000_ich8_cycle_init"); - hsfsts.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFSTS); + hsfsts.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS); /* May be check the Flash Des Valid bit in Hw status */ if (hsfsts.hsf_status.fldesvalid == 0) { @@ -8499,7 +8509,7 @@ e1000_ich8_cycle_init(struct e1000_hw *hw) hsfsts.hsf_status.flcerr = 1; hsfsts.hsf_status.dael = 1; - E1000_WRITE_ICH8_REG16(hw, ICH8_FLASH_HSFSTS, hsfsts.regval); + E1000_WRITE_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS, hsfsts.regval); /* Either we should have a hardware SPI cycle in progress bit to check * against, in order to start a new cycle or FDONE bit should be changed @@ -8514,13 +8524,13 @@ e1000_ich8_cycle_init(struct e1000_hw *hw) /* There is no cycle running at present, so we can start a cycle */ /* Begin by setting Flash Cycle Done. */ hsfsts.hsf_status.flcdone = 1; - E1000_WRITE_ICH8_REG16(hw, ICH8_FLASH_HSFSTS, hsfsts.regval); + E1000_WRITE_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS, hsfsts.regval); error = E1000_SUCCESS; } else { /* otherwise poll for sometime so the current cycle has a chance * to end before giving up. */ - for (i = 0; i < ICH8_FLASH_COMMAND_TIMEOUT; i++) { - hsfsts.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFSTS); + for (i = 0; i < ICH_FLASH_COMMAND_TIMEOUT; i++) { + hsfsts.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS); if (hsfsts.hsf_status.flcinprog == 0) { error = E1000_SUCCESS; break; @@ -8531,7 +8541,7 @@ e1000_ich8_cycle_init(struct e1000_hw *hw) /* Successful in waiting for previous cycle to timeout, * now set the Flash Cycle Done. */ hsfsts.hsf_status.flcdone = 1; - E1000_WRITE_ICH8_REG16(hw, ICH8_FLASH_HSFSTS, hsfsts.regval); + E1000_WRITE_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS, hsfsts.regval); } else { DEBUGOUT("Flash controller busy, cannot get access"); } @@ -8553,13 +8563,13 @@ e1000_ich8_flash_cycle(struct e1000_hw *hw, uint32_t timeout) uint32_t i = 0; /* Start a cycle by writing 1 in Flash Cycle Go in Hw Flash Control */ - hsflctl.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFCTL); + hsflctl.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFCTL); hsflctl.hsf_ctrl.flcgo = 1; - E1000_WRITE_ICH8_REG16(hw, ICH8_FLASH_HSFCTL, hsflctl.regval); + E1000_WRITE_ICH_FLASH_REG16(hw, ICH_FLASH_HSFCTL, hsflctl.regval); /* wait till FDONE bit is set to 1 */ do { - hsfsts.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFSTS); + hsfsts.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS); if (hsfsts.hsf_status.flcdone == 1) break; udelay(1); @@ -8593,10 +8603,10 @@ e1000_read_ich8_data(struct e1000_hw *hw, uint32_t index, DEBUGFUNC("e1000_read_ich8_data"); if (size < 1 || size > 2 || data == 0x0 || - index > ICH8_FLASH_LINEAR_ADDR_MASK) + index > ICH_FLASH_LINEAR_ADDR_MASK) return error; - flash_linear_address = (ICH8_FLASH_LINEAR_ADDR_MASK & index) + + flash_linear_address = (ICH_FLASH_LINEAR_ADDR_MASK & index) + hw->flash_base_addr; do { @@ -8606,25 +8616,25 @@ e1000_read_ich8_data(struct e1000_hw *hw, uint32_t index, if (error != E1000_SUCCESS) break; - hsflctl.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFCTL); + hsflctl.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFCTL); /* 0b/1b corresponds to 1 or 2 byte size, respectively. */ hsflctl.hsf_ctrl.fldbcount = size - 1; - hsflctl.hsf_ctrl.flcycle = ICH8_CYCLE_READ; - E1000_WRITE_ICH8_REG16(hw, ICH8_FLASH_HSFCTL, hsflctl.regval); + hsflctl.hsf_ctrl.flcycle = ICH_CYCLE_READ; + E1000_WRITE_ICH_FLASH_REG16(hw, ICH_FLASH_HSFCTL, hsflctl.regval); /* Write the last 24 bits of index into Flash Linear address field in * Flash Address */ /* TODO: TBD maybe check the index against the size of flash */ - E1000_WRITE_ICH8_REG(hw, ICH8_FLASH_FADDR, flash_linear_address); + E1000_WRITE_ICH_FLASH_REG(hw, ICH_FLASH_FADDR, flash_linear_address); - error = e1000_ich8_flash_cycle(hw, ICH8_FLASH_COMMAND_TIMEOUT); + error = e1000_ich8_flash_cycle(hw, ICH_FLASH_COMMAND_TIMEOUT); /* Check if FCERR is set to 1, if set to 1, clear it and try the whole * sequence a few more times, else read in (shift in) the Flash Data0, * the order is least significant byte first msb to lsb */ if (error == E1000_SUCCESS) { - flash_data = E1000_READ_ICH8_REG(hw, ICH8_FLASH_FDATA0); + flash_data = E1000_READ_ICH_FLASH_REG(hw, ICH_FLASH_FDATA0); if (size == 1) { *data = (uint8_t)(flash_data & 0x000000FF); } else if (size == 2) { @@ -8634,9 +8644,9 @@ e1000_read_ich8_data(struct e1000_hw *hw, uint32_t index, } else { /* If we've gotten here, then things are probably completely hosed, * but if the error condition is detected, it won't hurt to give - * it another try...ICH8_FLASH_CYCLE_REPEAT_COUNT times. + * it another try...ICH_FLASH_CYCLE_REPEAT_COUNT times. */ - hsfsts.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFSTS); + hsfsts.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS); if (hsfsts.hsf_status.flcerr == 1) { /* Repeat for some time before giving up. */ continue; @@ -8645,7 +8655,7 @@ e1000_read_ich8_data(struct e1000_hw *hw, uint32_t index, break; } } - } while (count++ < ICH8_FLASH_CYCLE_REPEAT_COUNT); + } while (count++ < ICH_FLASH_CYCLE_REPEAT_COUNT); return error; } @@ -8672,10 +8682,10 @@ e1000_write_ich8_data(struct e1000_hw *hw, uint32_t index, uint32_t size, DEBUGFUNC("e1000_write_ich8_data"); if (size < 1 || size > 2 || data > size * 0xff || - index > ICH8_FLASH_LINEAR_ADDR_MASK) + index > ICH_FLASH_LINEAR_ADDR_MASK) return error; - flash_linear_address = (ICH8_FLASH_LINEAR_ADDR_MASK & index) + + flash_linear_address = (ICH_FLASH_LINEAR_ADDR_MASK & index) + hw->flash_base_addr; do { @@ -8685,34 +8695,34 @@ e1000_write_ich8_data(struct e1000_hw *hw, uint32_t index, uint32_t size, if (error != E1000_SUCCESS) break; - hsflctl.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFCTL); + hsflctl.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFCTL); /* 0b/1b corresponds to 1 or 2 byte size, respectively. */ hsflctl.hsf_ctrl.fldbcount = size -1; - hsflctl.hsf_ctrl.flcycle = ICH8_CYCLE_WRITE; - E1000_WRITE_ICH8_REG16(hw, ICH8_FLASH_HSFCTL, hsflctl.regval); + hsflctl.hsf_ctrl.flcycle = ICH_CYCLE_WRITE; + E1000_WRITE_ICH_FLASH_REG16(hw, ICH_FLASH_HSFCTL, hsflctl.regval); /* Write the last 24 bits of index into Flash Linear address field in * Flash Address */ - E1000_WRITE_ICH8_REG(hw, ICH8_FLASH_FADDR, flash_linear_address); + E1000_WRITE_ICH_FLASH_REG(hw, ICH_FLASH_FADDR, flash_linear_address); if (size == 1) flash_data = (uint32_t)data & 0x00FF; else flash_data = (uint32_t)data; - E1000_WRITE_ICH8_REG(hw, ICH8_FLASH_FDATA0, flash_data); + E1000_WRITE_ICH_FLASH_REG(hw, ICH_FLASH_FDATA0, flash_data); /* check if FCERR is set to 1 , if set to 1, clear it and try the whole * sequence a few more times else done */ - error = e1000_ich8_flash_cycle(hw, ICH8_FLASH_COMMAND_TIMEOUT); + error = e1000_ich8_flash_cycle(hw, ICH_FLASH_COMMAND_TIMEOUT); if (error == E1000_SUCCESS) { break; } else { /* If we're here, then things are most likely completely hosed, * but if the error condition is detected, it won't hurt to give - * it another try...ICH8_FLASH_CYCLE_REPEAT_COUNT times. + * it another try...ICH_FLASH_CYCLE_REPEAT_COUNT times. */ - hsfsts.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFSTS); + hsfsts.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS); if (hsfsts.hsf_status.flcerr == 1) { /* Repeat for some time before giving up. */ continue; @@ -8721,7 +8731,7 @@ e1000_write_ich8_data(struct e1000_hw *hw, uint32_t index, uint32_t size, break; } } - } while (count++ < ICH8_FLASH_CYCLE_REPEAT_COUNT); + } while (count++ < ICH_FLASH_CYCLE_REPEAT_COUNT); return error; } @@ -8840,7 +8850,7 @@ e1000_erase_ich8_4k_segment(struct e1000_hw *hw, uint32_t bank) int32_t j = 0; int32_t error_flag = 0; - hsfsts.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFSTS); + hsfsts.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS); /* Determine HW Sector size: Read BERASE bits of Hw flash Status register */ /* 00: The Hw sector is 256 bytes, hence we need to erase 16 @@ -8853,19 +8863,14 @@ e1000_erase_ich8_4k_segment(struct e1000_hw *hw, uint32_t bank) * 11: The Hw sector size is 64K bytes */ if (hsfsts.hsf_status.berasesz == 0x0) { /* Hw sector size 256 */ - sub_sector_size = ICH8_FLASH_SEG_SIZE_256; - bank_size = ICH8_FLASH_SECTOR_SIZE; - iteration = ICH8_FLASH_SECTOR_SIZE / ICH8_FLASH_SEG_SIZE_256; + sub_sector_size = ICH_FLASH_SEG_SIZE_256; + bank_size = ICH_FLASH_SECTOR_SIZE; + iteration = ICH_FLASH_SECTOR_SIZE / ICH_FLASH_SEG_SIZE_256; } else if (hsfsts.hsf_status.berasesz == 0x1) { - bank_size = ICH8_FLASH_SEG_SIZE_4K; - iteration = 1; - } else if (hw->mac_type != e1000_ich8lan && - hsfsts.hsf_status.berasesz == 0x2) { - /* 8K erase size invalid for ICH8 - added in for ICH9 */ - bank_size = ICH9_FLASH_SEG_SIZE_8K; + bank_size = ICH_FLASH_SEG_SIZE_4K; iteration = 1; } else if (hsfsts.hsf_status.berasesz == 0x3) { - bank_size = ICH8_FLASH_SEG_SIZE_64K; + bank_size = ICH_FLASH_SEG_SIZE_64K; iteration = 1; } else { return error; @@ -8883,9 +8888,9 @@ e1000_erase_ich8_4k_segment(struct e1000_hw *hw, uint32_t bank) /* Write a value 11 (block Erase) in Flash Cycle field in Hw flash * Control */ - hsflctl.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFCTL); - hsflctl.hsf_ctrl.flcycle = ICH8_CYCLE_ERASE; - E1000_WRITE_ICH8_REG16(hw, ICH8_FLASH_HSFCTL, hsflctl.regval); + hsflctl.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFCTL); + hsflctl.hsf_ctrl.flcycle = ICH_CYCLE_ERASE; + E1000_WRITE_ICH_FLASH_REG16(hw, ICH_FLASH_HSFCTL, hsflctl.regval); /* Write the last 24 bits of an index within the block into Flash * Linear address field in Flash Address. This probably needs to @@ -8893,17 +8898,17 @@ e1000_erase_ich8_4k_segment(struct e1000_hw *hw, uint32_t bank) * the software bank size (4, 8 or 64 KBytes) */ flash_linear_address = bank * bank_size + j * sub_sector_size; flash_linear_address += hw->flash_base_addr; - flash_linear_address &= ICH8_FLASH_LINEAR_ADDR_MASK; + flash_linear_address &= ICH_FLASH_LINEAR_ADDR_MASK; - E1000_WRITE_ICH8_REG(hw, ICH8_FLASH_FADDR, flash_linear_address); + E1000_WRITE_ICH_FLASH_REG(hw, ICH_FLASH_FADDR, flash_linear_address); - error = e1000_ich8_flash_cycle(hw, ICH8_FLASH_ERASE_TIMEOUT); + error = e1000_ich8_flash_cycle(hw, ICH_FLASH_ERASE_TIMEOUT); /* Check if FCERR is set to 1. If 1, clear it and try the whole * sequence a few more times else Done */ if (error == E1000_SUCCESS) { break; } else { - hsfsts.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFSTS); + hsfsts.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS); if (hsfsts.hsf_status.flcerr == 1) { /* repeat for some time before giving up */ continue; @@ -8912,7 +8917,7 @@ e1000_erase_ich8_4k_segment(struct e1000_hw *hw, uint32_t bank) break; } } - } while ((count < ICH8_FLASH_CYCLE_REPEAT_COUNT) && !error_flag); + } while ((count < ICH_FLASH_CYCLE_REPEAT_COUNT) && !error_flag); if (error_flag == 1) break; } @@ -9013,5 +9018,3 @@ e1000_init_lcd_from_nvm(struct e1000_hw *hw) return E1000_SUCCESS; } - - diff --git a/drivers/net/e1000/e1000_hw.h b/drivers/net/e1000/e1000_hw.h index 449a60303e0..3321fb13bfa 100644 --- a/drivers/net/e1000/e1000_hw.h +++ b/drivers/net/e1000/e1000_hw.h @@ -128,11 +128,13 @@ typedef enum { /* PCI bus widths */ typedef enum { e1000_bus_width_unknown = 0, + /* These PCIe values should literally match the possible return values + * from config space */ + e1000_bus_width_pciex_1 = 1, + e1000_bus_width_pciex_2 = 2, + e1000_bus_width_pciex_4 = 4, e1000_bus_width_32, e1000_bus_width_64, - e1000_bus_width_pciex_1, - e1000_bus_width_pciex_2, - e1000_bus_width_pciex_4, e1000_bus_width_reserved } e1000_bus_width; @@ -326,6 +328,7 @@ int32_t e1000_phy_hw_reset(struct e1000_hw *hw); int32_t e1000_phy_reset(struct e1000_hw *hw); int32_t e1000_phy_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info); int32_t e1000_validate_mdi_setting(struct e1000_hw *hw); + void e1000_phy_powerdown_workaround(struct e1000_hw *hw); /* EEPROM Functions */ @@ -390,7 +393,6 @@ int32_t e1000_mng_write_dhcp_info(struct e1000_hw *hw, uint8_t *buffer, uint16_t length); boolean_t e1000_check_mng_mode(struct e1000_hw *hw); boolean_t e1000_enable_tx_pkt_filtering(struct e1000_hw *hw); - int32_t e1000_read_eeprom(struct e1000_hw *hw, uint16_t reg, uint16_t words, uint16_t *data); int32_t e1000_validate_eeprom_checksum(struct e1000_hw *hw); int32_t e1000_update_eeprom_checksum(struct e1000_hw *hw); @@ -473,6 +475,7 @@ int32_t e1000_check_phy_reset_block(struct e1000_hw *hw); #define E1000_DEV_ID_82571EB_FIBER 0x105F #define E1000_DEV_ID_82571EB_SERDES 0x1060 #define E1000_DEV_ID_82571EB_QUAD_COPPER 0x10A4 +#define E1000_DEV_ID_82571EB_QUAD_COPPER_LOWPROFILE 0x10BC #define E1000_DEV_ID_82572EI_COPPER 0x107D #define E1000_DEV_ID_82572EI_FIBER 0x107E #define E1000_DEV_ID_82572EI_SERDES 0x107F @@ -490,6 +493,8 @@ int32_t e1000_check_phy_reset_block(struct e1000_hw *hw); #define E1000_DEV_ID_ICH8_IGP_AMT 0x104A #define E1000_DEV_ID_ICH8_IGP_C 0x104B #define E1000_DEV_ID_ICH8_IFE 0x104C +#define E1000_DEV_ID_ICH8_IFE_GT 0x10C4 +#define E1000_DEV_ID_ICH8_IFE_G 0x10C5 #define E1000_DEV_ID_ICH8_IGP_M 0x104D @@ -576,6 +581,7 @@ int32_t e1000_check_phy_reset_block(struct e1000_hw *hw); * E1000_RAR_ENTRIES - 1 multicast addresses. */ #define E1000_RAR_ENTRIES 15 + #define E1000_RAR_ENTRIES_ICH8LAN 6 #define MIN_NUMBER_OF_DESCRIPTORS 8 @@ -1335,9 +1341,9 @@ struct e1000_hw_stats { uint64_t gotch; uint64_t rnbc; uint64_t ruc; + uint64_t rfc; uint64_t roc; uint64_t rlerrc; - uint64_t rfc; uint64_t rjc; uint64_t mgprc; uint64_t mgpdc; @@ -1577,8 +1583,8 @@ struct e1000_hw { #define E1000_HICR_FW_RESET 0xC0 #define E1000_SHADOW_RAM_WORDS 2048 -#define E1000_ICH8_NVM_SIG_WORD 0x13 -#define E1000_ICH8_NVM_SIG_MASK 0xC0 +#define E1000_ICH_NVM_SIG_WORD 0x13 +#define E1000_ICH_NVM_SIG_MASK 0xC0 /* EEPROM Read */ #define E1000_EERD_START 0x00000001 /* Start Read */ @@ -3172,6 +3178,7 @@ struct e1000_host_command_info { #define IGP3_VR_CTRL \ PHY_REG(776, 18) /* Voltage regulator control register */ #define IGP3_VR_CTRL_MODE_SHUT 0x0200 /* Enter powerdown, shutdown VRs */ +#define IGP3_VR_CTRL_MODE_MASK 0x0300 /* Shutdown VR Mask */ #define IGP3_CAPABILITY \ PHY_REG(776, 19) /* IGP3 Capability Register */ @@ -3256,41 +3263,40 @@ struct e1000_host_command_info { #define IFE_PSCL_PROBE_LEDS_OFF 0x0006 /* Force LEDs 0 and 2 off */ #define IFE_PSCL_PROBE_LEDS_ON 0x0007 /* Force LEDs 0 and 2 on */ -#define ICH8_FLASH_COMMAND_TIMEOUT 5000 /* 5000 uSecs - adjusted */ -#define ICH8_FLASH_ERASE_TIMEOUT 3000000 /* Up to 3 seconds - worst case */ -#define ICH8_FLASH_CYCLE_REPEAT_COUNT 10 /* 10 cycles */ -#define ICH8_FLASH_SEG_SIZE_256 256 -#define ICH8_FLASH_SEG_SIZE_4K 4096 -#define ICH9_FLASH_SEG_SIZE_8K 8192 -#define ICH8_FLASH_SEG_SIZE_64K 65536 - -#define ICH8_CYCLE_READ 0x0 -#define ICH8_CYCLE_RESERVED 0x1 -#define ICH8_CYCLE_WRITE 0x2 -#define ICH8_CYCLE_ERASE 0x3 - -#define ICH8_FLASH_GFPREG 0x0000 -#define ICH8_FLASH_HSFSTS 0x0004 -#define ICH8_FLASH_HSFCTL 0x0006 -#define ICH8_FLASH_FADDR 0x0008 -#define ICH8_FLASH_FDATA0 0x0010 -#define ICH8_FLASH_FRACC 0x0050 -#define ICH8_FLASH_FREG0 0x0054 -#define ICH8_FLASH_FREG1 0x0058 -#define ICH8_FLASH_FREG2 0x005C -#define ICH8_FLASH_FREG3 0x0060 -#define ICH8_FLASH_FPR0 0x0074 -#define ICH8_FLASH_FPR1 0x0078 -#define ICH8_FLASH_SSFSTS 0x0090 -#define ICH8_FLASH_SSFCTL 0x0092 -#define ICH8_FLASH_PREOP 0x0094 -#define ICH8_FLASH_OPTYPE 0x0096 -#define ICH8_FLASH_OPMENU 0x0098 - -#define ICH8_FLASH_REG_MAPSIZE 0x00A0 -#define ICH8_FLASH_SECTOR_SIZE 4096 -#define ICH8_GFPREG_BASE_MASK 0x1FFF -#define ICH8_FLASH_LINEAR_ADDR_MASK 0x00FFFFFF +#define ICH_FLASH_COMMAND_TIMEOUT 5000 /* 5000 uSecs - adjusted */ +#define ICH_FLASH_ERASE_TIMEOUT 3000000 /* Up to 3 seconds - worst case */ +#define ICH_FLASH_CYCLE_REPEAT_COUNT 10 /* 10 cycles */ +#define ICH_FLASH_SEG_SIZE_256 256 +#define ICH_FLASH_SEG_SIZE_4K 4096 +#define ICH_FLASH_SEG_SIZE_64K 65536 + +#define ICH_CYCLE_READ 0x0 +#define ICH_CYCLE_RESERVED 0x1 +#define ICH_CYCLE_WRITE 0x2 +#define ICH_CYCLE_ERASE 0x3 + +#define ICH_FLASH_GFPREG 0x0000 +#define ICH_FLASH_HSFSTS 0x0004 +#define ICH_FLASH_HSFCTL 0x0006 +#define ICH_FLASH_FADDR 0x0008 +#define ICH_FLASH_FDATA0 0x0010 +#define ICH_FLASH_FRACC 0x0050 +#define ICH_FLASH_FREG0 0x0054 +#define ICH_FLASH_FREG1 0x0058 +#define ICH_FLASH_FREG2 0x005C +#define ICH_FLASH_FREG3 0x0060 +#define ICH_FLASH_FPR0 0x0074 +#define ICH_FLASH_FPR1 0x0078 +#define ICH_FLASH_SSFSTS 0x0090 +#define ICH_FLASH_SSFCTL 0x0092 +#define ICH_FLASH_PREOP 0x0094 +#define ICH_FLASH_OPTYPE 0x0096 +#define ICH_FLASH_OPMENU 0x0098 + +#define ICH_FLASH_REG_MAPSIZE 0x00A0 +#define ICH_FLASH_SECTOR_SIZE 4096 +#define ICH_GFPREG_BASE_MASK 0x1FFF +#define ICH_FLASH_LINEAR_ADDR_MASK 0x00FFFFFF /* ICH8 GbE Flash Hardware Sequencing Flash Status Register bit breakdown */ /* Offset 04h HSFSTS */ diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 03294400bc9..73f3a85fd23 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -27,6 +27,7 @@ *******************************************************************************/ #include "e1000.h" +#include <net/ip6_checksum.h> char e1000_driver_name[] = "e1000"; static char e1000_driver_string[] = "Intel(R) PRO/1000 Network Driver"; @@ -35,7 +36,7 @@ static char e1000_driver_string[] = "Intel(R) PRO/1000 Network Driver"; #else #define DRIVERNAPI "-NAPI" #endif -#define DRV_VERSION "7.2.9-k4"DRIVERNAPI +#define DRV_VERSION "7.3.15-k2"DRIVERNAPI char e1000_driver_version[] = DRV_VERSION; static char e1000_copyright[] = "Copyright (c) 1999-2006 Intel Corporation."; @@ -103,6 +104,9 @@ static struct pci_device_id e1000_pci_tbl[] = { INTEL_E1000_ETHERNET_DEVICE(0x10B9), INTEL_E1000_ETHERNET_DEVICE(0x10BA), INTEL_E1000_ETHERNET_DEVICE(0x10BB), + INTEL_E1000_ETHERNET_DEVICE(0x10BC), + INTEL_E1000_ETHERNET_DEVICE(0x10C4), + INTEL_E1000_ETHERNET_DEVICE(0x10C5), /* required last entry */ {0,} }; @@ -154,6 +158,9 @@ static struct net_device_stats * e1000_get_stats(struct net_device *netdev); static int e1000_change_mtu(struct net_device *netdev, int new_mtu); static int e1000_set_mac(struct net_device *netdev, void *p); static irqreturn_t e1000_intr(int irq, void *data); +#ifdef CONFIG_PCI_MSI +static irqreturn_t e1000_intr_msi(int irq, void *data); +#endif static boolean_t e1000_clean_tx_irq(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring); #ifdef CONFIG_E1000_NAPI @@ -285,7 +292,7 @@ static int e1000_request_irq(struct e1000_adapter *adapter) flags = IRQF_SHARED; #ifdef CONFIG_PCI_MSI - if (adapter->hw.mac_type > e1000_82547_rev_2) { + if (adapter->hw.mac_type >= e1000_82571) { adapter->have_msi = TRUE; if ((err = pci_enable_msi(adapter->pdev))) { DPRINTK(PROBE, ERR, @@ -293,8 +300,14 @@ static int e1000_request_irq(struct e1000_adapter *adapter) adapter->have_msi = FALSE; } } - if (adapter->have_msi) + if (adapter->have_msi) { flags &= ~IRQF_SHARED; + err = request_irq(adapter->pdev->irq, &e1000_intr_msi, flags, + netdev->name, netdev); + if (err) + DPRINTK(PROBE, ERR, + "Unable to allocate interrupt Error: %d\n", err); + } else #endif if ((err = request_irq(adapter->pdev->irq, &e1000_intr, flags, netdev->name, netdev))) @@ -375,7 +388,7 @@ e1000_update_mng_vlan(struct e1000_adapter *adapter) * e1000_release_hw_control resets {CTRL_EXT|FWSM}:DRV_LOAD bit. * For ASF and Pass Through versions of f/w this means that the * driver is no longer loaded. For AMT version (only with 82573) i - * of the f/w this means that the netowrk i/f is closed. + * of the f/w this means that the network i/f is closed. * **/ @@ -416,7 +429,7 @@ e1000_release_hw_control(struct e1000_adapter *adapter) * e1000_get_hw_control sets {CTRL_EXT|FWSM}:DRV_LOAD bit. * For ASF and Pass Through versions of f/w this means that * the driver is loaded. For AMT version (only with 82573) - * of the f/w this means that the netowrk i/f is open. + * of the f/w this means that the network i/f is open. * **/ @@ -426,6 +439,7 @@ e1000_get_hw_control(struct e1000_adapter *adapter) uint32_t ctrl_ext; uint32_t swsm; uint32_t extcnf; + /* Let firmware know the driver has taken over */ switch (adapter->hw.mac_type) { case e1000_82571: @@ -601,9 +615,6 @@ void e1000_reset(struct e1000_adapter *adapter) { uint32_t pba, manc; -#ifdef DISABLE_MULR - uint32_t tctl; -#endif uint16_t fc_high_water_mark = E1000_FC_HIGH_DIFF; /* Repartition Pba for greater than 9k mtu @@ -670,12 +681,7 @@ e1000_reset(struct e1000_adapter *adapter) e1000_reset_hw(&adapter->hw); if (adapter->hw.mac_type >= e1000_82544) E1000_WRITE_REG(&adapter->hw, WUC, 0); -#ifdef DISABLE_MULR - /* disable Multiple Reads in Transmit Control Register for debugging */ - tctl = E1000_READ_REG(hw, TCTL); - E1000_WRITE_REG(hw, TCTL, tctl & ~E1000_TCTL_MULR); -#endif if (e1000_init_hw(&adapter->hw)) DPRINTK(PROBE, ERR, "Hardware Error\n"); e1000_update_mng_vlan(adapter); @@ -851,9 +857,9 @@ e1000_probe(struct pci_dev *pdev, (adapter->hw.mac_type != e1000_82547)) netdev->features |= NETIF_F_TSO; -#ifdef NETIF_F_TSO_IPV6 +#ifdef NETIF_F_TSO6 if (adapter->hw.mac_type > e1000_82547_rev_2) - netdev->features |= NETIF_F_TSO_IPV6; + netdev->features |= NETIF_F_TSO6; #endif #endif if (pci_using_dac) @@ -967,6 +973,7 @@ e1000_probe(struct pci_dev *pdev, break; case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3: case E1000_DEV_ID_82571EB_QUAD_COPPER: + case E1000_DEV_ID_82571EB_QUAD_COPPER_LOWPROFILE: /* if quad port adapter, disable WoL on all but port A */ if (global_quad_port_a != 0) adapter->eeprom_wol = 0; @@ -1278,12 +1285,10 @@ e1000_open(struct net_device *netdev) return -EBUSY; /* allocate transmit descriptors */ - if ((err = e1000_setup_all_tx_resources(adapter))) goto err_setup_tx; /* allocate receive descriptors */ - if ((err = e1000_setup_all_rx_resources(adapter))) goto err_setup_rx; @@ -1568,6 +1573,8 @@ e1000_configure_tx(struct e1000_adapter *adapter) if (hw->mac_type == e1000_82571 || hw->mac_type == e1000_82572) { tarc = E1000_READ_REG(hw, TARC0); + /* set the speed mode bit, we'll clear it if we're not at + * gigabit link later */ tarc |= (1 << 21); E1000_WRITE_REG(hw, TARC0, tarc); } else if (hw->mac_type == e1000_80003es2lan) { @@ -1582,8 +1589,11 @@ e1000_configure_tx(struct e1000_adapter *adapter) e1000_config_collision_dist(hw); /* Setup Transmit Descriptor Settings for eop descriptor */ - adapter->txd_cmd = E1000_TXD_CMD_IDE | E1000_TXD_CMD_EOP | - E1000_TXD_CMD_IFCS; + adapter->txd_cmd = E1000_TXD_CMD_EOP | E1000_TXD_CMD_IFCS; + + /* only set IDE if we are delaying interrupts using the timers */ + if (adapter->tx_int_delay) + adapter->txd_cmd |= E1000_TXD_CMD_IDE; if (hw->mac_type < e1000_82543) adapter->txd_cmd |= E1000_TXD_CMD_RPS; @@ -1820,8 +1830,11 @@ e1000_setup_rctl(struct e1000_adapter *adapter) /* Configure extra packet-split registers */ rfctl = E1000_READ_REG(&adapter->hw, RFCTL); rfctl |= E1000_RFCTL_EXTEN; - /* disable IPv6 packet split support */ - rfctl |= E1000_RFCTL_IPV6_DIS; + /* disable packet split support for IPv6 extension headers, + * because some malformed IPv6 headers can hang the RX */ + rfctl |= (E1000_RFCTL_IPV6_EX_DIS | + E1000_RFCTL_NEW_IPV6_EXT_DIS); + E1000_WRITE_REG(&adapter->hw, RFCTL, rfctl); rctl |= E1000_RCTL_DTYP_PS; @@ -1884,7 +1897,7 @@ e1000_configure_rx(struct e1000_adapter *adapter) if (hw->mac_type >= e1000_82540) { E1000_WRITE_REG(hw, RADV, adapter->rx_abs_int_delay); - if (adapter->itr > 1) + if (adapter->itr_setting != 0) E1000_WRITE_REG(hw, ITR, 1000000000 / (adapter->itr * 256)); } @@ -1894,11 +1907,11 @@ e1000_configure_rx(struct e1000_adapter *adapter) /* Reset delay timers after every interrupt */ ctrl_ext |= E1000_CTRL_EXT_INT_TIMER_CLR; #ifdef CONFIG_E1000_NAPI - /* Auto-Mask interrupts upon ICR read. */ + /* Auto-Mask interrupts upon ICR access */ ctrl_ext |= E1000_CTRL_EXT_IAME; + E1000_WRITE_REG(hw, IAM, 0xffffffff); #endif E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext); - E1000_WRITE_REG(hw, IAM, ~0); E1000_WRITE_FLUSH(hw); } @@ -1937,6 +1950,12 @@ e1000_configure_rx(struct e1000_adapter *adapter) E1000_WRITE_REG(hw, RXCSUM, rxcsum); } + /* enable early receives on 82573, only takes effect if using > 2048 + * byte total frame size. for example only for jumbo frames */ +#define E1000_ERT_2048 0x100 + if (hw->mac_type == e1000_82573) + E1000_WRITE_REG(hw, ERT, E1000_ERT_2048); + /* Enable Receives */ E1000_WRITE_REG(hw, RCTL, rctl); } @@ -1990,10 +2009,13 @@ e1000_unmap_and_free_tx_resource(struct e1000_adapter *adapter, buffer_info->dma, buffer_info->length, PCI_DMA_TODEVICE); + buffer_info->dma = 0; } - if (buffer_info->skb) + if (buffer_info->skb) { dev_kfree_skb_any(buffer_info->skb); - memset(buffer_info, 0, sizeof(struct e1000_buffer)); + buffer_info->skb = NULL; + } + /* buffer_info must be completely set up in the transmit path */ } /** @@ -2417,6 +2439,7 @@ e1000_watchdog(unsigned long data) DPRINTK(LINK, INFO, "Gigabit has been disabled, downgrading speed\n"); } + if (adapter->hw.mac_type == e1000_82573) { e1000_enable_tx_pkt_filtering(&adapter->hw); if (adapter->mng_vlan_id != adapter->hw.mng_cookie.vlan_id) @@ -2461,13 +2484,12 @@ e1000_watchdog(unsigned long data) if ((adapter->hw.mac_type == e1000_82571 || adapter->hw.mac_type == e1000_82572) && txb2b == 0) { -#define SPEED_MODE_BIT (1 << 21) uint32_t tarc0; tarc0 = E1000_READ_REG(&adapter->hw, TARC0); - tarc0 &= ~SPEED_MODE_BIT; + tarc0 &= ~(1 << 21); E1000_WRITE_REG(&adapter->hw, TARC0, tarc0); } - + #ifdef NETIF_F_TSO /* disable TSO for pcie and 10/100 speeds, to avoid * some hardware issues */ @@ -2479,9 +2501,15 @@ e1000_watchdog(unsigned long data) DPRINTK(PROBE,INFO, "10/100 speed: disabling TSO\n"); netdev->features &= ~NETIF_F_TSO; +#ifdef NETIF_F_TSO6 + netdev->features &= ~NETIF_F_TSO6; +#endif break; case SPEED_1000: netdev->features |= NETIF_F_TSO; +#ifdef NETIF_F_TSO6 + netdev->features |= NETIF_F_TSO6; +#endif break; default: /* oops */ @@ -2548,19 +2576,6 @@ e1000_watchdog(unsigned long data) } } - /* Dynamic mode for Interrupt Throttle Rate (ITR) */ - if (adapter->hw.mac_type >= e1000_82540 && adapter->itr == 1) { - /* Symmetric Tx/Rx gets a reduced ITR=2000; Total - * asymmetrical Tx or Rx gets ITR=8000; everyone - * else is between 2000-8000. */ - uint32_t goc = (adapter->gotcl + adapter->gorcl) / 10000; - uint32_t dif = (adapter->gotcl > adapter->gorcl ? - adapter->gotcl - adapter->gorcl : - adapter->gorcl - adapter->gotcl) / 10000; - uint32_t itr = goc > 0 ? (dif * 6000 / goc + 2000) : 8000; - E1000_WRITE_REG(&adapter->hw, ITR, 1000000000 / (itr * 256)); - } - /* Cause software interrupt to ensure rx ring is cleaned */ E1000_WRITE_REG(&adapter->hw, ICS, E1000_ICS_RXDMT0); @@ -2576,6 +2591,135 @@ e1000_watchdog(unsigned long data) mod_timer(&adapter->watchdog_timer, jiffies + 2 * HZ); } +enum latency_range { + lowest_latency = 0, + low_latency = 1, + bulk_latency = 2, + latency_invalid = 255 +}; + +/** + * e1000_update_itr - update the dynamic ITR value based on statistics + * Stores a new ITR value based on packets and byte + * counts during the last interrupt. The advantage of per interrupt + * computation is faster updates and more accurate ITR for the current + * traffic pattern. Constants in this function were computed + * based on theoretical maximum wire speed and thresholds were set based + * on testing data as well as attempting to minimize response time + * while increasing bulk throughput. + * this functionality is controlled by the InterruptThrottleRate module + * parameter (see e1000_param.c) + * @adapter: pointer to adapter + * @itr_setting: current adapter->itr + * @packets: the number of packets during this measurement interval + * @bytes: the number of bytes during this measurement interval + **/ +static unsigned int e1000_update_itr(struct e1000_adapter *adapter, + uint16_t itr_setting, + int packets, + int bytes) +{ + unsigned int retval = itr_setting; + struct e1000_hw *hw = &adapter->hw; + + if (unlikely(hw->mac_type < e1000_82540)) + goto update_itr_done; + + if (packets == 0) + goto update_itr_done; + + + switch (itr_setting) { + case lowest_latency: + if ((packets < 5) && (bytes > 512)) + retval = low_latency; + break; + case low_latency: /* 50 usec aka 20000 ints/s */ + if (bytes > 10000) { + if ((packets < 10) || + ((bytes/packets) > 1200)) + retval = bulk_latency; + else if ((packets > 35)) + retval = lowest_latency; + } else if (packets <= 2 && bytes < 512) + retval = lowest_latency; + break; + case bulk_latency: /* 250 usec aka 4000 ints/s */ + if (bytes > 25000) { + if (packets > 35) + retval = low_latency; + } else { + if (bytes < 6000) + retval = low_latency; + } + break; + } + +update_itr_done: + return retval; +} + +static void e1000_set_itr(struct e1000_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + uint16_t current_itr; + uint32_t new_itr = adapter->itr; + + if (unlikely(hw->mac_type < e1000_82540)) + return; + + /* for non-gigabit speeds, just fix the interrupt rate at 4000 */ + if (unlikely(adapter->link_speed != SPEED_1000)) { + current_itr = 0; + new_itr = 4000; + goto set_itr_now; + } + + adapter->tx_itr = e1000_update_itr(adapter, + adapter->tx_itr, + adapter->total_tx_packets, + adapter->total_tx_bytes); + adapter->rx_itr = e1000_update_itr(adapter, + adapter->rx_itr, + adapter->total_rx_packets, + adapter->total_rx_bytes); + + current_itr = max(adapter->rx_itr, adapter->tx_itr); + + /* conservative mode eliminates the lowest_latency setting */ + if (current_itr == lowest_latency && (adapter->itr_setting == 3)) + current_itr = low_latency; + + switch (current_itr) { + /* counts and packets in update_itr are dependent on these numbers */ + case lowest_latency: + new_itr = 70000; + break; + case low_latency: + new_itr = 20000; /* aka hwitr = ~200 */ + break; + case bulk_latency: + new_itr = 4000; + break; + default: + break; + } + +set_itr_now: + if (new_itr != adapter->itr) { + /* this attempts to bias the interrupt rate towards Bulk + * by adding intermediate steps when interrupt rate is + * increasing */ + new_itr = new_itr > adapter->itr ? + min(adapter->itr + (new_itr >> 2), new_itr) : + new_itr; + adapter->itr = new_itr; + E1000_WRITE_REG(hw, ITR, 1000000000 / (new_itr * 256)); + } + + return; +} + #define E1000_TX_FLAGS_CSUM 0x00000001 #define E1000_TX_FLAGS_VLAN 0x00000002 #define E1000_TX_FLAGS_TSO 0x00000004 @@ -2616,7 +2760,7 @@ e1000_tso(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring, 0); cmd_length = E1000_TXD_CMD_IP; ipcse = skb->h.raw - skb->data - 1; -#ifdef NETIF_F_TSO_IPV6 +#ifdef NETIF_F_TSO6 } else if (skb->protocol == htons(ETH_P_IPV6)) { skb->nh.ipv6h->payload_len = 0; skb->h.th->check = @@ -2652,6 +2796,7 @@ e1000_tso(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring, context_desc->cmd_and_length = cpu_to_le32(cmd_length); buffer_info->time_stamp = jiffies; + buffer_info->next_to_watch = i; if (++i == tx_ring->count) i = 0; tx_ring->next_to_use = i; @@ -2680,12 +2825,13 @@ e1000_tx_csum(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring, context_desc = E1000_CONTEXT_DESC(*tx_ring, i); context_desc->upper_setup.tcp_fields.tucss = css; - context_desc->upper_setup.tcp_fields.tucso = css + skb->csum; + context_desc->upper_setup.tcp_fields.tucso = css + skb->csum_offset; context_desc->upper_setup.tcp_fields.tucse = 0; context_desc->tcp_seg_setup.data = 0; context_desc->cmd_and_length = cpu_to_le32(E1000_TXD_CMD_DEXT); buffer_info->time_stamp = jiffies; + buffer_info->next_to_watch = i; if (unlikely(++i == tx_ring->count)) i = 0; tx_ring->next_to_use = i; @@ -2754,6 +2900,7 @@ e1000_tx_map(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring, size, PCI_DMA_TODEVICE); buffer_info->time_stamp = jiffies; + buffer_info->next_to_watch = i; len -= size; offset += size; @@ -2793,6 +2940,7 @@ e1000_tx_map(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring, size, PCI_DMA_TODEVICE); buffer_info->time_stamp = jiffies; + buffer_info->next_to_watch = i; len -= size; offset += size; @@ -2858,6 +3006,9 @@ e1000_tx_queue(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring, tx_ring->next_to_use = i; writel(i, adapter->hw.hw_addr + tx_ring->tdt); + /* we need this if more than one processor can write to our tail + * at a time, it syncronizes IO on IA64/Altix systems */ + mmiowb(); } /** @@ -2951,6 +3102,7 @@ static int __e1000_maybe_stop_tx(struct net_device *netdev, int size) /* A reprieve! */ netif_start_queue(netdev); + ++adapter->restart_queue; return 0; } @@ -3009,9 +3161,9 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) max_per_txd = min(mss << 2, max_per_txd); max_txd_pwr = fls(max_per_txd) - 1; - /* TSO Workaround for 82571/2/3 Controllers -- if skb->data - * points to just header, pull a few bytes of payload from - * frags into skb->data */ + /* TSO Workaround for 82571/2/3 Controllers -- if skb->data + * points to just header, pull a few bytes of payload from + * frags into skb->data */ hdr_len = ((skb->h.raw - skb->data) + (skb->h.th->doff << 2)); if (skb->data_len && (hdr_len == (skb->len - skb->data_len))) { switch (adapter->hw.mac_type) { @@ -3316,12 +3468,12 @@ e1000_update_stats(struct e1000_adapter *adapter) adapter->stats.roc += E1000_READ_REG(hw, ROC); if (adapter->hw.mac_type != e1000_ich8lan) { - adapter->stats.prc64 += E1000_READ_REG(hw, PRC64); - adapter->stats.prc127 += E1000_READ_REG(hw, PRC127); - adapter->stats.prc255 += E1000_READ_REG(hw, PRC255); - adapter->stats.prc511 += E1000_READ_REG(hw, PRC511); - adapter->stats.prc1023 += E1000_READ_REG(hw, PRC1023); - adapter->stats.prc1522 += E1000_READ_REG(hw, PRC1522); + adapter->stats.prc64 += E1000_READ_REG(hw, PRC64); + adapter->stats.prc127 += E1000_READ_REG(hw, PRC127); + adapter->stats.prc255 += E1000_READ_REG(hw, PRC255); + adapter->stats.prc511 += E1000_READ_REG(hw, PRC511); + adapter->stats.prc1023 += E1000_READ_REG(hw, PRC1023); + adapter->stats.prc1522 += E1000_READ_REG(hw, PRC1522); } adapter->stats.symerrs += E1000_READ_REG(hw, SYMERRS); @@ -3352,12 +3504,12 @@ e1000_update_stats(struct e1000_adapter *adapter) adapter->stats.tpr += E1000_READ_REG(hw, TPR); if (adapter->hw.mac_type != e1000_ich8lan) { - adapter->stats.ptc64 += E1000_READ_REG(hw, PTC64); - adapter->stats.ptc127 += E1000_READ_REG(hw, PTC127); - adapter->stats.ptc255 += E1000_READ_REG(hw, PTC255); - adapter->stats.ptc511 += E1000_READ_REG(hw, PTC511); - adapter->stats.ptc1023 += E1000_READ_REG(hw, PTC1023); - adapter->stats.ptc1522 += E1000_READ_REG(hw, PTC1522); + adapter->stats.ptc64 += E1000_READ_REG(hw, PTC64); + adapter->stats.ptc127 += E1000_READ_REG(hw, PTC127); + adapter->stats.ptc255 += E1000_READ_REG(hw, PTC255); + adapter->stats.ptc511 += E1000_READ_REG(hw, PTC511); + adapter->stats.ptc1023 += E1000_READ_REG(hw, PTC1023); + adapter->stats.ptc1522 += E1000_READ_REG(hw, PTC1522); } adapter->stats.mptc += E1000_READ_REG(hw, MPTC); @@ -3383,18 +3535,17 @@ e1000_update_stats(struct e1000_adapter *adapter) adapter->stats.icrxoc += E1000_READ_REG(hw, ICRXOC); if (adapter->hw.mac_type != e1000_ich8lan) { - adapter->stats.icrxptc += E1000_READ_REG(hw, ICRXPTC); - adapter->stats.icrxatc += E1000_READ_REG(hw, ICRXATC); - adapter->stats.ictxptc += E1000_READ_REG(hw, ICTXPTC); - adapter->stats.ictxatc += E1000_READ_REG(hw, ICTXATC); - adapter->stats.ictxqec += E1000_READ_REG(hw, ICTXQEC); - adapter->stats.ictxqmtc += E1000_READ_REG(hw, ICTXQMTC); - adapter->stats.icrxdmtc += E1000_READ_REG(hw, ICRXDMTC); + adapter->stats.icrxptc += E1000_READ_REG(hw, ICRXPTC); + adapter->stats.icrxatc += E1000_READ_REG(hw, ICRXATC); + adapter->stats.ictxptc += E1000_READ_REG(hw, ICTXPTC); + adapter->stats.ictxatc += E1000_READ_REG(hw, ICTXATC); + adapter->stats.ictxqec += E1000_READ_REG(hw, ICTXQEC); + adapter->stats.ictxqmtc += E1000_READ_REG(hw, ICTXQMTC); + adapter->stats.icrxdmtc += E1000_READ_REG(hw, ICRXDMTC); } } /* Fill out the OS statistics structure */ - adapter->net_stats.rx_packets = adapter->stats.gprc; adapter->net_stats.tx_packets = adapter->stats.gptc; adapter->net_stats.rx_bytes = adapter->stats.gorcl; @@ -3426,7 +3577,6 @@ e1000_update_stats(struct e1000_adapter *adapter) /* Tx Dropped needs to be maintained elsewhere */ /* Phy Stats */ - if (hw->media_type == e1000_media_type_copper) { if ((adapter->link_speed == SPEED_1000) && (!e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_tmp))) { @@ -3442,6 +3592,95 @@ e1000_update_stats(struct e1000_adapter *adapter) spin_unlock_irqrestore(&adapter->stats_lock, flags); } +#ifdef CONFIG_PCI_MSI + +/** + * e1000_intr_msi - Interrupt Handler + * @irq: interrupt number + * @data: pointer to a network interface device structure + **/ + +static +irqreturn_t e1000_intr_msi(int irq, void *data) +{ + struct net_device *netdev = data; + struct e1000_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; +#ifndef CONFIG_E1000_NAPI + int i; +#endif + + /* this code avoids the read of ICR but has to get 1000 interrupts + * at every link change event before it will notice the change */ + if (++adapter->detect_link >= 1000) { + uint32_t icr = E1000_READ_REG(hw, ICR); +#ifdef CONFIG_E1000_NAPI + /* read ICR disables interrupts using IAM, so keep up with our + * enable/disable accounting */ + atomic_inc(&adapter->irq_sem); +#endif + adapter->detect_link = 0; + if ((icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC)) && + (icr & E1000_ICR_INT_ASSERTED)) { + hw->get_link_status = 1; + /* 80003ES2LAN workaround-- + * For packet buffer work-around on link down event; + * disable receives here in the ISR and + * reset adapter in watchdog + */ + if (netif_carrier_ok(netdev) && + (adapter->hw.mac_type == e1000_80003es2lan)) { + /* disable receives */ + uint32_t rctl = E1000_READ_REG(hw, RCTL); + E1000_WRITE_REG(hw, RCTL, rctl & ~E1000_RCTL_EN); + } + /* guard against interrupt when we're going down */ + if (!test_bit(__E1000_DOWN, &adapter->flags)) + mod_timer(&adapter->watchdog_timer, + jiffies + 1); + } + } else { + E1000_WRITE_REG(hw, ICR, (0xffffffff & ~(E1000_ICR_RXSEQ | + E1000_ICR_LSC))); + /* bummer we have to flush here, but things break otherwise as + * some event appears to be lost or delayed and throughput + * drops. In almost all tests this flush is un-necessary */ + E1000_WRITE_FLUSH(hw); +#ifdef CONFIG_E1000_NAPI + /* Interrupt Auto-Mask (IAM)...upon writing ICR, interrupts are + * masked. No need for the IMC write, but it does mean we + * should account for it ASAP. */ + atomic_inc(&adapter->irq_sem); +#endif + } + +#ifdef CONFIG_E1000_NAPI + if (likely(netif_rx_schedule_prep(netdev))) { + adapter->total_tx_bytes = 0; + adapter->total_tx_packets = 0; + adapter->total_rx_bytes = 0; + adapter->total_rx_packets = 0; + __netif_rx_schedule(netdev); + } else + e1000_irq_enable(adapter); +#else + adapter->total_tx_bytes = 0; + adapter->total_rx_bytes = 0; + adapter->total_tx_packets = 0; + adapter->total_rx_packets = 0; + + for (i = 0; i < E1000_MAX_INTR; i++) + if (unlikely(!adapter->clean_rx(adapter, adapter->rx_ring) & + !e1000_clean_tx_irq(adapter, adapter->tx_ring))) + break; + + if (likely(adapter->itr_setting & 3)) + e1000_set_itr(adapter); +#endif + + return IRQ_HANDLED; +} +#endif /** * e1000_intr - Interrupt Handler @@ -3458,7 +3697,17 @@ e1000_intr(int irq, void *data) uint32_t rctl, icr = E1000_READ_REG(hw, ICR); #ifndef CONFIG_E1000_NAPI int i; -#else +#endif + if (unlikely(!icr)) + return IRQ_NONE; /* Not our interrupt */ + +#ifdef CONFIG_E1000_NAPI + /* IMS will not auto-mask if INT_ASSERTED is not set, and if it is + * not set, then the adapter didn't send an interrupt */ + if (unlikely(hw->mac_type >= e1000_82571 && + !(icr & E1000_ICR_INT_ASSERTED))) + return IRQ_NONE; + /* Interrupt Auto-Mask...upon reading ICR, * interrupts are masked. No need for the * IMC write, but it does mean we should @@ -3467,14 +3716,6 @@ e1000_intr(int irq, void *data) atomic_inc(&adapter->irq_sem); #endif - if (unlikely(!icr)) { -#ifdef CONFIG_E1000_NAPI - if (hw->mac_type >= e1000_82571) - e1000_irq_enable(adapter); -#endif - return IRQ_NONE; /* Not our interrupt */ - } - if (unlikely(icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC))) { hw->get_link_status = 1; /* 80003ES2LAN workaround-- @@ -3495,13 +3736,20 @@ e1000_intr(int irq, void *data) #ifdef CONFIG_E1000_NAPI if (unlikely(hw->mac_type < e1000_82571)) { + /* disable interrupts, without the synchronize_irq bit */ atomic_inc(&adapter->irq_sem); E1000_WRITE_REG(hw, IMC, ~0); E1000_WRITE_FLUSH(hw); } - if (likely(netif_rx_schedule_prep(netdev))) + if (likely(netif_rx_schedule_prep(netdev))) { + adapter->total_tx_bytes = 0; + adapter->total_tx_packets = 0; + adapter->total_rx_bytes = 0; + adapter->total_rx_packets = 0; __netif_rx_schedule(netdev); - else + } else + /* this really should not happen! if it does it is basically a + * bug, but not a hard error, so enable ints and continue */ e1000_irq_enable(adapter); #else /* Writing IMC and IMS is needed for 82547. @@ -3519,16 +3767,23 @@ e1000_intr(int irq, void *data) E1000_WRITE_REG(hw, IMC, ~0); } + adapter->total_tx_bytes = 0; + adapter->total_rx_bytes = 0; + adapter->total_tx_packets = 0; + adapter->total_rx_packets = 0; + for (i = 0; i < E1000_MAX_INTR; i++) if (unlikely(!adapter->clean_rx(adapter, adapter->rx_ring) & !e1000_clean_tx_irq(adapter, adapter->tx_ring))) break; + if (likely(adapter->itr_setting & 3)) + e1000_set_itr(adapter); + if (hw->mac_type == e1000_82547 || hw->mac_type == e1000_82547_rev_2) e1000_irq_enable(adapter); #endif - return IRQ_HANDLED; } @@ -3572,6 +3827,8 @@ e1000_clean(struct net_device *poll_dev, int *budget) if ((!tx_cleaned && (work_done == 0)) || !netif_running(poll_dev)) { quit_polling: + if (likely(adapter->itr_setting & 3)) + e1000_set_itr(adapter); netif_rx_complete(poll_dev); e1000_irq_enable(adapter); return 0; @@ -3598,6 +3855,7 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter, unsigned int count = 0; #endif boolean_t cleaned = FALSE; + unsigned int total_tx_bytes=0, total_tx_packets=0; i = tx_ring->next_to_clean; eop = tx_ring->buffer_info[i].next_to_watch; @@ -3609,13 +3867,19 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter, buffer_info = &tx_ring->buffer_info[i]; cleaned = (i == eop); + if (cleaned) { + /* this packet count is wrong for TSO but has a + * tendency to make dynamic ITR change more + * towards bulk */ + total_tx_packets++; + total_tx_bytes += buffer_info->skb->len; + } e1000_unmap_and_free_tx_resource(adapter, buffer_info); - memset(tx_desc, 0, sizeof(struct e1000_tx_desc)); + tx_desc->upper.data = 0; if (unlikely(++i == tx_ring->count)) i = 0; } - eop = tx_ring->buffer_info[i].next_to_watch; eop_desc = E1000_TX_DESC(*tx_ring, eop); #ifdef CONFIG_E1000_NAPI @@ -3634,8 +3898,10 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter, * sees the new next_to_clean. */ smp_mb(); - if (netif_queue_stopped(netdev)) + if (netif_queue_stopped(netdev)) { netif_wake_queue(netdev); + ++adapter->restart_queue; + } } if (adapter->detect_tx_hung) { @@ -3673,6 +3939,8 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter, netif_stop_queue(netdev); } } + adapter->total_tx_bytes += total_tx_bytes; + adapter->total_tx_packets += total_tx_packets; return cleaned; } @@ -3752,6 +4020,7 @@ e1000_clean_rx_irq(struct e1000_adapter *adapter, unsigned int i; int cleaned_count = 0; boolean_t cleaned = FALSE; + unsigned int total_rx_bytes=0, total_rx_packets=0; i = rx_ring->next_to_clean; rx_desc = E1000_RX_DESC(*rx_ring, i); @@ -3760,6 +4029,7 @@ e1000_clean_rx_irq(struct e1000_adapter *adapter, while (rx_desc->status & E1000_RXD_STAT_DD) { struct sk_buff *skb; u8 status; + #ifdef CONFIG_E1000_NAPI if (*work_done >= work_to_do) break; @@ -3817,6 +4087,10 @@ e1000_clean_rx_irq(struct e1000_adapter *adapter, * done after the TBI_ACCEPT workaround above */ length -= 4; + /* probably a little skewed due to removing CRC */ + total_rx_bytes += length; + total_rx_packets++; + /* code added for copybreak, this should improve * performance for small packets with large amounts * of reassembly being done in the stack */ @@ -3832,12 +4106,11 @@ e1000_clean_rx_irq(struct e1000_adapter *adapter, /* save the skb in buffer_info as good */ buffer_info->skb = skb; skb = new_skb; - skb_put(skb, length); } - } else - skb_put(skb, length); - + /* else just continue with the old one */ + } /* end copybreak code */ + skb_put(skb, length); /* Receive Checksum Offload */ e1000_rx_checksum(adapter, @@ -3886,6 +4159,8 @@ next_desc: if (cleaned_count) adapter->alloc_rx_buf(adapter, rx_ring, cleaned_count); + adapter->total_rx_packets += total_rx_packets; + adapter->total_rx_bytes += total_rx_bytes; return cleaned; } @@ -3915,6 +4190,7 @@ e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, uint32_t length, staterr; int cleaned_count = 0; boolean_t cleaned = FALSE; + unsigned int total_rx_bytes=0, total_rx_packets=0; i = rx_ring->next_to_clean; rx_desc = E1000_RX_DESC_PS(*rx_ring, i); @@ -3999,7 +4275,7 @@ e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, goto copydone; } /* if */ } - + for (j = 0; j < adapter->rx_ps_pages; j++) { if (!(length= le16_to_cpu(rx_desc->wb.upper.length[j]))) break; @@ -4019,6 +4295,9 @@ e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, pskb_trim(skb, skb->len - 4); copydone: + total_rx_bytes += skb->len; + total_rx_packets++; + e1000_rx_checksum(adapter, staterr, le16_to_cpu(rx_desc->wb.lower.hi_dword.csum_ip.csum), skb); skb->protocol = eth_type_trans(skb, netdev); @@ -4067,6 +4346,8 @@ next_desc: if (cleaned_count) adapter->alloc_rx_buf(adapter, rx_ring, cleaned_count); + adapter->total_rx_packets += total_rx_packets; + adapter->total_rx_bytes += total_rx_bytes; return cleaned; } @@ -4234,7 +4515,7 @@ e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter, } skb = netdev_alloc_skb(netdev, - adapter->rx_ps_bsize0 + NET_IP_ALIGN); + adapter->rx_ps_bsize0 + NET_IP_ALIGN); if (unlikely(!skb)) { adapter->alloc_rx_buff_failed++; @@ -4511,7 +4792,6 @@ e1000_read_pcie_cap_reg(struct e1000_hw *hw, uint32_t reg, uint16_t *value) return E1000_SUCCESS; } - void e1000_io_write(struct e1000_hw *hw, unsigned long port, uint32_t value) { @@ -4534,12 +4814,12 @@ e1000_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp) E1000_WRITE_REG(&adapter->hw, CTRL, ctrl); if (adapter->hw.mac_type != e1000_ich8lan) { - /* enable VLAN receive filtering */ - rctl = E1000_READ_REG(&adapter->hw, RCTL); - rctl |= E1000_RCTL_VFE; - rctl &= ~E1000_RCTL_CFIEN; - E1000_WRITE_REG(&adapter->hw, RCTL, rctl); - e1000_update_mng_vlan(adapter); + /* enable VLAN receive filtering */ + rctl = E1000_READ_REG(&adapter->hw, RCTL); + rctl |= E1000_RCTL_VFE; + rctl &= ~E1000_RCTL_CFIEN; + E1000_WRITE_REG(&adapter->hw, RCTL, rctl); + e1000_update_mng_vlan(adapter); } } else { /* disable VLAN tag insert/strip */ @@ -4548,14 +4828,16 @@ e1000_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp) E1000_WRITE_REG(&adapter->hw, CTRL, ctrl); if (adapter->hw.mac_type != e1000_ich8lan) { - /* disable VLAN filtering */ - rctl = E1000_READ_REG(&adapter->hw, RCTL); - rctl &= ~E1000_RCTL_VFE; - E1000_WRITE_REG(&adapter->hw, RCTL, rctl); - if (adapter->mng_vlan_id != (uint16_t)E1000_MNG_VLAN_NONE) { - e1000_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id); - adapter->mng_vlan_id = E1000_MNG_VLAN_NONE; - } + /* disable VLAN filtering */ + rctl = E1000_READ_REG(&adapter->hw, RCTL); + rctl &= ~E1000_RCTL_VFE; + E1000_WRITE_REG(&adapter->hw, RCTL, rctl); + if (adapter->mng_vlan_id != + (uint16_t)E1000_MNG_VLAN_NONE) { + e1000_vlan_rx_kill_vid(netdev, + adapter->mng_vlan_id); + adapter->mng_vlan_id = E1000_MNG_VLAN_NONE; + } } } diff --git a/drivers/net/e1000/e1000_osdep.h b/drivers/net/e1000/e1000_osdep.h index a464cb29062..18afc0c25da 100644 --- a/drivers/net/e1000/e1000_osdep.h +++ b/drivers/net/e1000/e1000_osdep.h @@ -107,17 +107,16 @@ typedef enum { #define E1000_WRITE_FLUSH(a) E1000_READ_REG(a, STATUS) -#define E1000_WRITE_ICH8_REG(a, reg, value) ( \ +#define E1000_WRITE_ICH_FLASH_REG(a, reg, value) ( \ writel((value), ((a)->flash_address + reg))) -#define E1000_READ_ICH8_REG(a, reg) ( \ +#define E1000_READ_ICH_FLASH_REG(a, reg) ( \ readl((a)->flash_address + reg)) -#define E1000_WRITE_ICH8_REG16(a, reg, value) ( \ +#define E1000_WRITE_ICH_FLASH_REG16(a, reg, value) ( \ writew((value), ((a)->flash_address + reg))) -#define E1000_READ_ICH8_REG16(a, reg) ( \ +#define E1000_READ_ICH_FLASH_REG16(a, reg) ( \ readw((a)->flash_address + reg)) - #endif /* _E1000_OSDEP_H_ */ diff --git a/drivers/net/e1000/e1000_param.c b/drivers/net/e1000/e1000_param.c index 9c3c1acefcc..cbfcd7f2889 100644 --- a/drivers/net/e1000/e1000_param.c +++ b/drivers/net/e1000/e1000_param.c @@ -44,16 +44,6 @@ */ #define E1000_PARAM_INIT { [0 ... E1000_MAX_NIC] = OPTION_UNSET } -/* Module Parameters are always initialized to -1, so that the driver - * can tell the difference between no user specified value or the - * user asking for the default value. - * The true default values are loaded in when e1000_check_options is called. - * - * This is a GCC extension to ANSI C. - * See the item "Labeled Elements in Initializers" in the section - * "Extensions to the C Language Family" of the GCC documentation. - */ - #define E1000_PARAM(X, desc) \ static int __devinitdata X[E1000_MAX_NIC+1] = E1000_PARAM_INIT; \ static int num_##X = 0; \ @@ -67,7 +57,6 @@ * * Default Value: 256 */ - E1000_PARAM(TxDescriptors, "Number of transmit descriptors"); /* Receive Descriptor Count @@ -77,7 +66,6 @@ E1000_PARAM(TxDescriptors, "Number of transmit descriptors"); * * Default Value: 256 */ - E1000_PARAM(RxDescriptors, "Number of receive descriptors"); /* User Specified Speed Override @@ -90,7 +78,6 @@ E1000_PARAM(RxDescriptors, "Number of receive descriptors"); * * Default Value: 0 */ - E1000_PARAM(Speed, "Speed setting"); /* User Specified Duplex Override @@ -102,7 +89,6 @@ E1000_PARAM(Speed, "Speed setting"); * * Default Value: 0 */ - E1000_PARAM(Duplex, "Duplex setting"); /* Auto-negotiation Advertisement Override @@ -119,8 +105,9 @@ E1000_PARAM(Duplex, "Duplex setting"); * * Default Value: 0x2F (copper); 0x20 (fiber) */ - E1000_PARAM(AutoNeg, "Advertised auto-negotiation setting"); +#define AUTONEG_ADV_DEFAULT 0x2F +#define AUTONEG_ADV_MASK 0x2F /* User Specified Flow Control Override * @@ -132,8 +119,8 @@ E1000_PARAM(AutoNeg, "Advertised auto-negotiation setting"); * * Default Value: Read flow control settings from the EEPROM */ - E1000_PARAM(FlowControl, "Flow Control setting"); +#define FLOW_CONTROL_DEFAULT FLOW_CONTROL_FULL /* XsumRX - Receive Checksum Offload Enable/Disable * @@ -144,53 +131,54 @@ E1000_PARAM(FlowControl, "Flow Control setting"); * * Default Value: 1 */ - E1000_PARAM(XsumRX, "Disable or enable Receive Checksum offload"); /* Transmit Interrupt Delay in units of 1.024 microseconds + * Tx interrupt delay needs to typically be set to something non zero * * Valid Range: 0-65535 - * - * Default Value: 64 */ - E1000_PARAM(TxIntDelay, "Transmit Interrupt Delay"); +#define DEFAULT_TIDV 8 +#define MAX_TXDELAY 0xFFFF +#define MIN_TXDELAY 0 /* Transmit Absolute Interrupt Delay in units of 1.024 microseconds * * Valid Range: 0-65535 - * - * Default Value: 0 */ - E1000_PARAM(TxAbsIntDelay, "Transmit Absolute Interrupt Delay"); +#define DEFAULT_TADV 32 +#define MAX_TXABSDELAY 0xFFFF +#define MIN_TXABSDELAY 0 /* Receive Interrupt Delay in units of 1.024 microseconds + * hardware will likely hang if you set this to anything but zero. * * Valid Range: 0-65535 - * - * Default Value: 0 */ - E1000_PARAM(RxIntDelay, "Receive Interrupt Delay"); +#define DEFAULT_RDTR 0 +#define MAX_RXDELAY 0xFFFF +#define MIN_RXDELAY 0 /* Receive Absolute Interrupt Delay in units of 1.024 microseconds * * Valid Range: 0-65535 - * - * Default Value: 128 */ - E1000_PARAM(RxAbsIntDelay, "Receive Absolute Interrupt Delay"); +#define DEFAULT_RADV 8 +#define MAX_RXABSDELAY 0xFFFF +#define MIN_RXABSDELAY 0 /* Interrupt Throttle Rate (interrupts/sec) * - * Valid Range: 100-100000 (0=off, 1=dynamic) - * - * Default Value: 8000 + * Valid Range: 100-100000 (0=off, 1=dynamic, 3=dynamic conservative) */ - E1000_PARAM(InterruptThrottleRate, "Interrupt Throttling Rate"); +#define DEFAULT_ITR 3 +#define MAX_ITR 100000 +#define MIN_ITR 100 /* Enable Smart Power Down of the PHY * @@ -198,7 +186,6 @@ E1000_PARAM(InterruptThrottleRate, "Interrupt Throttling Rate"); * * Default Value: 0 (disabled) */ - E1000_PARAM(SmartPowerDownEnable, "Enable PHY smart power down"); /* Enable Kumeran Lock Loss workaround @@ -207,33 +194,8 @@ E1000_PARAM(SmartPowerDownEnable, "Enable PHY smart power down"); * * Default Value: 1 (enabled) */ - E1000_PARAM(KumeranLockLoss, "Enable Kumeran lock loss workaround"); -#define AUTONEG_ADV_DEFAULT 0x2F -#define AUTONEG_ADV_MASK 0x2F -#define FLOW_CONTROL_DEFAULT FLOW_CONTROL_FULL - -#define DEFAULT_RDTR 0 -#define MAX_RXDELAY 0xFFFF -#define MIN_RXDELAY 0 - -#define DEFAULT_RADV 128 -#define MAX_RXABSDELAY 0xFFFF -#define MIN_RXABSDELAY 0 - -#define DEFAULT_TIDV 64 -#define MAX_TXDELAY 0xFFFF -#define MIN_TXDELAY 0 - -#define DEFAULT_TADV 64 -#define MAX_TXABSDELAY 0xFFFF -#define MIN_TXABSDELAY 0 - -#define DEFAULT_ITR 8000 -#define MAX_ITR 100000 -#define MIN_ITR 100 - struct e1000_option { enum { enable_option, range_option, list_option } type; char *name; @@ -510,15 +472,27 @@ e1000_check_options(struct e1000_adapter *adapter) break; case 1: DPRINTK(PROBE, INFO, "%s set to dynamic mode\n", - opt.name); + opt.name); + adapter->itr_setting = adapter->itr; + adapter->itr = 20000; + break; + case 3: + DPRINTK(PROBE, INFO, + "%s set to dynamic conservative mode\n", + opt.name); + adapter->itr_setting = adapter->itr; + adapter->itr = 20000; break; default: e1000_validate_option(&adapter->itr, &opt, - adapter); + adapter); + /* save the setting, because the dynamic bits change itr */ + adapter->itr_setting = adapter->itr; break; } } else { - adapter->itr = opt.def; + adapter->itr_setting = opt.def; + adapter->itr = 20000; } } { /* Smart Power Down */ diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c index c5ed635bce3..439f4133829 100644 --- a/drivers/net/forcedeth.c +++ b/drivers/net/forcedeth.c @@ -110,6 +110,8 @@ * 0.55: 22 Mar 2006: Add flow control (pause frame). * 0.56: 22 Mar 2006: Additional ethtool config and moduleparam support. * 0.57: 14 May 2006: Mac address set in probe/remove and order corrections. + * 0.58: 30 Oct 2006: Added support for sideband management unit. + * 0.59: 30 Oct 2006: Added support for recoverable error. * * Known bugs: * We suspect that on some hardware no TX done interrupts are generated. @@ -126,7 +128,7 @@ #else #define DRIVERNAPI #endif -#define FORCEDETH_VERSION "0.57" +#define FORCEDETH_VERSION "0.59" #define DRV_NAME "forcedeth" #include <linux/module.h> @@ -174,11 +176,12 @@ #define DEV_HAS_PAUSEFRAME_TX 0x0200 /* device supports tx pause frames */ #define DEV_HAS_STATISTICS 0x0400 /* device supports hw statistics */ #define DEV_HAS_TEST_EXTENDED 0x0800 /* device supports extended diagnostic test */ +#define DEV_HAS_MGMT_UNIT 0x1000 /* device supports management unit */ enum { NvRegIrqStatus = 0x000, #define NVREG_IRQSTAT_MIIEVENT 0x040 -#define NVREG_IRQSTAT_MASK 0x1ff +#define NVREG_IRQSTAT_MASK 0x81ff NvRegIrqMask = 0x004, #define NVREG_IRQ_RX_ERROR 0x0001 #define NVREG_IRQ_RX 0x0002 @@ -189,15 +192,16 @@ enum { #define NVREG_IRQ_LINK 0x0040 #define NVREG_IRQ_RX_FORCED 0x0080 #define NVREG_IRQ_TX_FORCED 0x0100 +#define NVREG_IRQ_RECOVER_ERROR 0x8000 #define NVREG_IRQMASK_THROUGHPUT 0x00df #define NVREG_IRQMASK_CPU 0x0040 #define NVREG_IRQ_TX_ALL (NVREG_IRQ_TX_ERR|NVREG_IRQ_TX_OK|NVREG_IRQ_TX_FORCED) #define NVREG_IRQ_RX_ALL (NVREG_IRQ_RX_ERROR|NVREG_IRQ_RX|NVREG_IRQ_RX_NOBUF|NVREG_IRQ_RX_FORCED) -#define NVREG_IRQ_OTHER (NVREG_IRQ_TIMER|NVREG_IRQ_LINK) +#define NVREG_IRQ_OTHER (NVREG_IRQ_TIMER|NVREG_IRQ_LINK|NVREG_IRQ_RECOVER_ERROR) #define NVREG_IRQ_UNKNOWN (~(NVREG_IRQ_RX_ERROR|NVREG_IRQ_RX|NVREG_IRQ_RX_NOBUF|NVREG_IRQ_TX_ERR| \ NVREG_IRQ_TX_OK|NVREG_IRQ_TIMER|NVREG_IRQ_LINK|NVREG_IRQ_RX_FORCED| \ - NVREG_IRQ_TX_FORCED)) + NVREG_IRQ_TX_FORCED|NVREG_IRQ_RECOVER_ERROR)) NvRegUnknownSetupReg6 = 0x008, #define NVREG_UNKSETUP6_VAL 3 @@ -222,6 +226,15 @@ enum { #define NVREG_MAC_RESET_ASSERT 0x0F3 NvRegTransmitterControl = 0x084, #define NVREG_XMITCTL_START 0x01 +#define NVREG_XMITCTL_MGMT_ST 0x40000000 +#define NVREG_XMITCTL_SYNC_MASK 0x000f0000 +#define NVREG_XMITCTL_SYNC_NOT_READY 0x0 +#define NVREG_XMITCTL_SYNC_PHY_INIT 0x00040000 +#define NVREG_XMITCTL_MGMT_SEMA_MASK 0x00000f00 +#define NVREG_XMITCTL_MGMT_SEMA_FREE 0x0 +#define NVREG_XMITCTL_HOST_SEMA_MASK 0x0000f000 +#define NVREG_XMITCTL_HOST_SEMA_ACQ 0x0000f000 +#define NVREG_XMITCTL_HOST_LOADED 0x00004000 NvRegTransmitterStatus = 0x088, #define NVREG_XMITSTAT_BUSY 0x01 @@ -304,8 +317,8 @@ enum { #define NVREG_MIISTAT_LINKCHANGE 0x0008 #define NVREG_MIISTAT_MASK 0x000f #define NVREG_MIISTAT_MASK2 0x000f - NvRegUnknownSetupReg4 = 0x184, -#define NVREG_UNKSETUP4_VAL 8 + NvRegMIIMask = 0x184, +#define NVREG_MII_LINKCHANGE 0x0008 NvRegAdapterControl = 0x188, #define NVREG_ADAPTCTL_START 0x02 @@ -707,6 +720,7 @@ struct fe_priv { unsigned int phy_model; u16 gigabit; int intr_test; + int recover_error; /* General data: RO fields */ dma_addr_t ring_addr; @@ -719,6 +733,7 @@ struct fe_priv { u32 driver_data; u32 register_size; int rx_csum; + u32 mac_in_use; void __iomem *base; @@ -2443,6 +2458,23 @@ static irqreturn_t nv_nic_irq(int foo, void *data) printk(KERN_DEBUG "%s: received irq with unknown events 0x%x. Please report\n", dev->name, events); } + if (unlikely(events & NVREG_IRQ_RECOVER_ERROR)) { + spin_lock(&np->lock); + /* disable interrupts on the nic */ + if (!(np->msi_flags & NV_MSI_X_ENABLED)) + writel(0, base + NvRegIrqMask); + else + writel(np->irqmask, base + NvRegIrqMask); + pci_push(base); + + if (!np->in_shutdown) { + np->nic_poll_irq = np->irqmask; + np->recover_error = 1; + mod_timer(&np->nic_poll, jiffies + POLL_WAIT); + } + spin_unlock(&np->lock); + break; + } #ifdef CONFIG_FORCEDETH_NAPI if (events & NVREG_IRQ_RX_ALL) { netif_rx_schedule(dev); @@ -2673,6 +2705,20 @@ static irqreturn_t nv_nic_irq_other(int foo, void *data) spin_unlock_irqrestore(&np->lock, flags); np->link_timeout = jiffies + LINK_TIMEOUT; } + if (events & NVREG_IRQ_RECOVER_ERROR) { + spin_lock_irq(&np->lock); + /* disable interrupts on the nic */ + writel(NVREG_IRQ_OTHER, base + NvRegIrqMask); + pci_push(base); + + if (!np->in_shutdown) { + np->nic_poll_irq |= NVREG_IRQ_OTHER; + np->recover_error = 1; + mod_timer(&np->nic_poll, jiffies + POLL_WAIT); + } + spin_unlock_irq(&np->lock); + break; + } if (events & (NVREG_IRQ_UNKNOWN)) { printk(KERN_DEBUG "%s: received irq with unknown events 0x%x. Please report\n", dev->name, events); @@ -2902,6 +2948,42 @@ static void nv_do_nic_poll(unsigned long data) } np->nic_poll_irq = 0; + if (np->recover_error) { + np->recover_error = 0; + printk(KERN_INFO "forcedeth: MAC in recoverable error state\n"); + if (netif_running(dev)) { + netif_tx_lock_bh(dev); + spin_lock(&np->lock); + /* stop engines */ + nv_stop_rx(dev); + nv_stop_tx(dev); + nv_txrx_reset(dev); + /* drain rx queue */ + nv_drain_rx(dev); + nv_drain_tx(dev); + /* reinit driver view of the rx queue */ + set_bufsize(dev); + if (nv_init_ring(dev)) { + if (!np->in_shutdown) + mod_timer(&np->oom_kick, jiffies + OOM_REFILL); + } + /* reinit nic view of the rx queue */ + writel(np->rx_buf_sz, base + NvRegOffloadConfig); + setup_hw_rings(dev, NV_SETUP_RX_RING | NV_SETUP_TX_RING); + writel( ((np->rx_ring_size-1) << NVREG_RINGSZ_RXSHIFT) + ((np->tx_ring_size-1) << NVREG_RINGSZ_TXSHIFT), + base + NvRegRingSizes); + pci_push(base); + writel(NVREG_TXRXCTL_KICK|np->txrxctl_bits, get_hwbase(dev) + NvRegTxRxControl); + pci_push(base); + + /* restart rx engine */ + nv_start_rx(dev); + nv_start_tx(dev); + spin_unlock(&np->lock); + netif_tx_unlock_bh(dev); + } + } + /* FIXME: Do we need synchronize_irq(dev->irq) here? */ writel(mask, base + NvRegIrqMask); @@ -4030,6 +4112,54 @@ static void nv_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid) /* nothing to do */ }; +/* The mgmt unit and driver use a semaphore to access the phy during init */ +static int nv_mgmt_acquire_sema(struct net_device *dev) +{ + u8 __iomem *base = get_hwbase(dev); + int i; + u32 tx_ctrl, mgmt_sema; + + for (i = 0; i < 10; i++) { + mgmt_sema = readl(base + NvRegTransmitterControl) & NVREG_XMITCTL_MGMT_SEMA_MASK; + if (mgmt_sema == NVREG_XMITCTL_MGMT_SEMA_FREE) + break; + msleep(500); + } + + if (mgmt_sema != NVREG_XMITCTL_MGMT_SEMA_FREE) + return 0; + + for (i = 0; i < 2; i++) { + tx_ctrl = readl(base + NvRegTransmitterControl); + tx_ctrl |= NVREG_XMITCTL_HOST_SEMA_ACQ; + writel(tx_ctrl, base + NvRegTransmitterControl); + + /* verify that semaphore was acquired */ + tx_ctrl = readl(base + NvRegTransmitterControl); + if (((tx_ctrl & NVREG_XMITCTL_HOST_SEMA_MASK) == NVREG_XMITCTL_HOST_SEMA_ACQ) && + ((tx_ctrl & NVREG_XMITCTL_MGMT_SEMA_MASK) == NVREG_XMITCTL_MGMT_SEMA_FREE)) + return 1; + else + udelay(50); + } + + return 0; +} + +/* Indicate to mgmt unit whether driver is loaded or not */ +static void nv_mgmt_driver_loaded(struct net_device *dev, int loaded) +{ + u8 __iomem *base = get_hwbase(dev); + u32 tx_ctrl; + + tx_ctrl = readl(base + NvRegTransmitterControl); + if (loaded) + tx_ctrl |= NVREG_XMITCTL_HOST_LOADED; + else + tx_ctrl &= ~NVREG_XMITCTL_HOST_LOADED; + writel(tx_ctrl, base + NvRegTransmitterControl); +} + static int nv_open(struct net_device *dev) { struct fe_priv *np = netdev_priv(dev); @@ -4085,7 +4215,7 @@ static int nv_open(struct net_device *dev) NV_SETUP5_DELAY, NV_SETUP5_DELAYMAX, KERN_INFO "open: SetupReg5, Bit 31 remained off\n"); - writel(0, base + NvRegUnknownSetupReg4); + writel(0, base + NvRegMIIMask); writel(NVREG_IRQSTAT_MASK, base + NvRegIrqStatus); writel(NVREG_MIISTAT_MASK2, base + NvRegMIIStatus); @@ -4111,7 +4241,7 @@ static int nv_open(struct net_device *dev) writel((np->phyaddr << NVREG_ADAPTCTL_PHYSHIFT)|NVREG_ADAPTCTL_PHYVALID|NVREG_ADAPTCTL_RUNNING, base + NvRegAdapterControl); writel(NVREG_MIISPEED_BIT8|NVREG_MIIDELAY, base + NvRegMIISpeed); - writel(NVREG_UNKSETUP4_VAL, base + NvRegUnknownSetupReg4); + writel(NVREG_MII_LINKCHANGE, base + NvRegMIIMask); if (np->wolenabled) writel(NVREG_WAKEUPFLAGS_ENABLE , base + NvRegWakeUpFlags); @@ -4230,6 +4360,8 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i u8 __iomem *base; int err, i; u32 powerstate, txreg; + u32 phystate_orig = 0, phystate; + int phyinitialized = 0; dev = alloc_etherdev(sizeof(struct fe_priv)); err = -ENOMEM; @@ -4514,6 +4646,48 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i np->need_linktimer = 0; } + /* clear phy state and temporarily halt phy interrupts */ + writel(0, base + NvRegMIIMask); + phystate = readl(base + NvRegAdapterControl); + if (phystate & NVREG_ADAPTCTL_RUNNING) { + phystate_orig = 1; + phystate &= ~NVREG_ADAPTCTL_RUNNING; + writel(phystate, base + NvRegAdapterControl); + } + writel(NVREG_MIISTAT_MASK, base + NvRegMIIStatus); + + if (id->driver_data & DEV_HAS_MGMT_UNIT) { + writel(0x1, base + 0x204); pci_push(base); + msleep(500); + /* management unit running on the mac? */ + np->mac_in_use = readl(base + NvRegTransmitterControl) & NVREG_XMITCTL_MGMT_ST; + if (np->mac_in_use) { + u32 mgmt_sync; + /* management unit setup the phy already? */ + mgmt_sync = readl(base + NvRegTransmitterControl) & NVREG_XMITCTL_SYNC_MASK; + if (mgmt_sync == NVREG_XMITCTL_SYNC_NOT_READY) { + if (!nv_mgmt_acquire_sema(dev)) { + for (i = 0; i < 5000; i++) { + msleep(1); + mgmt_sync = readl(base + NvRegTransmitterControl) & NVREG_XMITCTL_SYNC_MASK; + if (mgmt_sync == NVREG_XMITCTL_SYNC_NOT_READY) + continue; + if (mgmt_sync == NVREG_XMITCTL_SYNC_PHY_INIT) + phyinitialized = 1; + break; + } + } else { + /* we need to init the phy */ + } + } else if (mgmt_sync == NVREG_XMITCTL_SYNC_PHY_INIT) { + /* phy is inited by SMU */ + phyinitialized = 1; + } else { + /* we need to init the phy */ + } + } + } + /* find a suitable phy */ for (i = 1; i <= 32; i++) { int id1, id2; @@ -4545,8 +4719,14 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i goto out_error; } - /* reset it */ - phy_init(dev); + if (!phyinitialized) { + /* reset it */ + phy_init(dev); + } + + if (id->driver_data & DEV_HAS_MGMT_UNIT) { + nv_mgmt_driver_loaded(dev, 1); + } /* set default link speed settings */ np->linkspeed = NVREG_LINKSPEED_FORCE|NVREG_LINKSPEED_10; @@ -4565,6 +4745,10 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i return 0; out_error: + if (phystate_orig) + writel(phystate|NVREG_ADAPTCTL_RUNNING, base + NvRegAdapterControl); + if (np->mac_in_use) + nv_mgmt_driver_loaded(dev, 0); pci_set_drvdata(pci_dev, NULL); out_freering: free_rings(dev); @@ -4594,6 +4778,9 @@ static void __devexit nv_remove(struct pci_dev *pci_dev) writel(np->orig_mac[0], base + NvRegMacAddrA); writel(np->orig_mac[1], base + NvRegMacAddrB); + if (np->mac_in_use) + nv_mgmt_driver_loaded(dev, 0); + /* free all structures */ free_rings(dev); iounmap(get_hwbase(dev)); @@ -4603,6 +4790,50 @@ static void __devexit nv_remove(struct pci_dev *pci_dev) pci_set_drvdata(pci_dev, NULL); } +#ifdef CONFIG_PM +static int nv_suspend(struct pci_dev *pdev, pm_message_t state) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct fe_priv *np = netdev_priv(dev); + + if (!netif_running(dev)) + goto out; + + netif_device_detach(dev); + + // Gross. + nv_close(dev); + + pci_save_state(pdev); + pci_enable_wake(pdev, pci_choose_state(pdev, state), np->wolenabled); + pci_set_power_state(pdev, pci_choose_state(pdev, state)); +out: + return 0; +} + +static int nv_resume(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + int rc = 0; + + if (!netif_running(dev)) + goto out; + + netif_device_attach(dev); + + pci_set_power_state(pdev, PCI_D0); + pci_restore_state(pdev); + pci_enable_wake(pdev, PCI_D0, 0); + + rc = nv_open(dev); +out: + return rc; +} +#else +#define nv_suspend NULL +#define nv_resume NULL +#endif /* CONFIG_PM */ + static struct pci_device_id pci_tbl[] = { { /* nForce Ethernet Controller */ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_1), @@ -4658,43 +4889,59 @@ static struct pci_device_id pci_tbl[] = { }, { /* MCP55 Ethernet Controller */ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_14), - .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_VLAN|DEV_HAS_MSI|DEV_HAS_MSI_X|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX|DEV_HAS_STATISTICS|DEV_HAS_TEST_EXTENDED, + .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_VLAN|DEV_HAS_MSI|DEV_HAS_MSI_X|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX|DEV_HAS_STATISTICS|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT, }, { /* MCP55 Ethernet Controller */ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_15), - .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_VLAN|DEV_HAS_MSI|DEV_HAS_MSI_X|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX|DEV_HAS_STATISTICS|DEV_HAS_TEST_EXTENDED, + .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_VLAN|DEV_HAS_MSI|DEV_HAS_MSI_X|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX|DEV_HAS_STATISTICS|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT, }, { /* MCP61 Ethernet Controller */ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_16), - .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX|DEV_HAS_STATISTICS|DEV_HAS_TEST_EXTENDED, + .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX|DEV_HAS_STATISTICS|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT, }, { /* MCP61 Ethernet Controller */ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_17), - .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX|DEV_HAS_STATISTICS|DEV_HAS_TEST_EXTENDED, + .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX|DEV_HAS_STATISTICS|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT, }, { /* MCP61 Ethernet Controller */ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_18), - .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX|DEV_HAS_STATISTICS|DEV_HAS_TEST_EXTENDED, + .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX|DEV_HAS_STATISTICS|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT, }, { /* MCP61 Ethernet Controller */ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_19), - .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX|DEV_HAS_STATISTICS|DEV_HAS_TEST_EXTENDED, + .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX|DEV_HAS_STATISTICS|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT, }, { /* MCP65 Ethernet Controller */ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_20), - .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX|DEV_HAS_STATISTICS|DEV_HAS_TEST_EXTENDED, + .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX|DEV_HAS_STATISTICS|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT, }, { /* MCP65 Ethernet Controller */ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_21), - .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX|DEV_HAS_STATISTICS|DEV_HAS_TEST_EXTENDED, + .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX|DEV_HAS_STATISTICS|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT, }, { /* MCP65 Ethernet Controller */ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_22), - .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX|DEV_HAS_STATISTICS|DEV_HAS_TEST_EXTENDED, + .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX|DEV_HAS_STATISTICS|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT, }, { /* MCP65 Ethernet Controller */ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_23), - .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX|DEV_HAS_STATISTICS|DEV_HAS_TEST_EXTENDED, + .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX|DEV_HAS_STATISTICS|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT, + }, + { /* MCP67 Ethernet Controller */ + PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_24), + .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX|DEV_HAS_STATISTICS|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT, + }, + { /* MCP67 Ethernet Controller */ + PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_25), + .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX|DEV_HAS_STATISTICS|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT, + }, + { /* MCP67 Ethernet Controller */ + PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_26), + .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX|DEV_HAS_STATISTICS|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT, + }, + { /* MCP67 Ethernet Controller */ + PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_27), + .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX|DEV_HAS_STATISTICS|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT, }, {0,}, }; @@ -4704,9 +4951,10 @@ static struct pci_driver driver = { .id_table = pci_tbl, .probe = nv_probe, .remove = __devexit_p(nv_remove), + .suspend = nv_suspend, + .resume = nv_resume, }; - static int __init init_nic(void) { printk(KERN_INFO "forcedeth.c: Reverse Engineered nForce ethernet driver. Version %s.\n", FORCEDETH_VERSION); diff --git a/drivers/net/fs_enet/fs_enet-main.c b/drivers/net/fs_enet/fs_enet-main.c index cb3958704a8..889d3a13e95 100644 --- a/drivers/net/fs_enet/fs_enet-main.c +++ b/drivers/net/fs_enet/fs_enet-main.c @@ -779,7 +779,8 @@ static int fs_init_phy(struct net_device *dev) fep->oldspeed = 0; fep->oldduplex = -1; if(fep->fpi->bus_id) - phydev = phy_connect(dev, fep->fpi->bus_id, &fs_adjust_link, 0); + phydev = phy_connect(dev, fep->fpi->bus_id, &fs_adjust_link, 0, + PHY_INTERFACE_MODE_MII); else { printk("No phy bus ID specified in BSP code\n"); return -EINVAL; diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c index a06d8d1aace..baa35144134 100644 --- a/drivers/net/gianfar.c +++ b/drivers/net/gianfar.c @@ -9,7 +9,7 @@ * Author: Andy Fleming * Maintainer: Kumar Gala * - * Copyright (c) 2002-2004 Freescale Semiconductor, Inc. + * Copyright (c) 2002-2006 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -133,6 +133,9 @@ static void gfar_set_hash_for_addr(struct net_device *dev, u8 *addr); #ifdef CONFIG_GFAR_NAPI static int gfar_poll(struct net_device *dev, int *budget); #endif +#ifdef CONFIG_NET_POLL_CONTROLLER +static void gfar_netpoll(struct net_device *dev); +#endif int gfar_clean_rx_ring(struct net_device *dev, int rx_work_limit); static int gfar_process_frame(struct net_device *dev, struct sk_buff *skb, int length); static void gfar_vlan_rx_register(struct net_device *netdev, @@ -260,6 +263,9 @@ static int gfar_probe(struct platform_device *pdev) dev->poll = gfar_poll; dev->weight = GFAR_DEV_WEIGHT; #endif +#ifdef CONFIG_NET_POLL_CONTROLLER + dev->poll_controller = gfar_netpoll; +#endif dev->stop = gfar_close; dev->get_stats = gfar_get_stats; dev->change_mtu = gfar_change_mtu; @@ -392,6 +398,38 @@ static int gfar_remove(struct platform_device *pdev) } +/* Reads the controller's registers to determine what interface + * connects it to the PHY. + */ +static phy_interface_t gfar_get_interface(struct net_device *dev) +{ + struct gfar_private *priv = netdev_priv(dev); + u32 ecntrl = gfar_read(&priv->regs->ecntrl); + + if (ecntrl & ECNTRL_SGMII_MODE) + return PHY_INTERFACE_MODE_SGMII; + + if (ecntrl & ECNTRL_TBI_MODE) { + if (ecntrl & ECNTRL_REDUCED_MODE) + return PHY_INTERFACE_MODE_RTBI; + else + return PHY_INTERFACE_MODE_TBI; + } + + if (ecntrl & ECNTRL_REDUCED_MODE) { + if (ecntrl & ECNTRL_REDUCED_MII_MODE) + return PHY_INTERFACE_MODE_RMII; + else + return PHY_INTERFACE_MODE_RGMII; + } + + if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_GIGABIT) + return PHY_INTERFACE_MODE_GMII; + + return PHY_INTERFACE_MODE_MII; +} + + /* Initializes driver's PHY state, and attaches to the PHY. * Returns 0 on success. */ @@ -403,6 +441,7 @@ static int init_phy(struct net_device *dev) SUPPORTED_1000baseT_Full : 0; struct phy_device *phydev; char phy_id[BUS_ID_SIZE]; + phy_interface_t interface; priv->oldlink = 0; priv->oldspeed = 0; @@ -410,7 +449,9 @@ static int init_phy(struct net_device *dev) snprintf(phy_id, BUS_ID_SIZE, PHY_ID_FMT, priv->einfo->bus_id, priv->einfo->phy_id); - phydev = phy_connect(dev, phy_id, &adjust_link, 0); + interface = gfar_get_interface(dev); + + phydev = phy_connect(dev, phy_id, &adjust_link, 0, interface); if (IS_ERR(phydev)) { printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name); @@ -1536,6 +1577,33 @@ static int gfar_poll(struct net_device *dev, int *budget) } #endif +#ifdef CONFIG_NET_POLL_CONTROLLER +/* + * Polling 'interrupt' - used by things like netconsole to send skbs + * without having to re-enable interrupts. It's not called while + * the interrupt routine is executing. + */ +static void gfar_netpoll(struct net_device *dev) +{ + struct gfar_private *priv = netdev_priv(dev); + + /* If the device has multiple interrupts, run tx/rx */ + if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_MULTI_INTR) { + disable_irq(priv->interruptTransmit); + disable_irq(priv->interruptReceive); + disable_irq(priv->interruptError); + gfar_interrupt(priv->interruptTransmit, dev); + enable_irq(priv->interruptError); + enable_irq(priv->interruptReceive); + enable_irq(priv->interruptTransmit); + } else { + disable_irq(priv->interruptTransmit); + gfar_interrupt(priv->interruptTransmit, dev); + enable_irq(priv->interruptTransmit); + } +} +#endif + /* The interrupt handler for devices with one interrupt */ static irqreturn_t gfar_interrupt(int irq, void *dev_id) { diff --git a/drivers/net/gianfar.h b/drivers/net/gianfar.h index 9e81a50cf2b..39e9e321fcb 100644 --- a/drivers/net/gianfar.h +++ b/drivers/net/gianfar.h @@ -160,7 +160,10 @@ extern const char gfar_driver_version[]; #define ECNTRL_INIT_SETTINGS 0x00001000 #define ECNTRL_TBI_MODE 0x00000020 +#define ECNTRL_REDUCED_MODE 0x00000010 #define ECNTRL_R100 0x00000008 +#define ECNTRL_REDUCED_MII_MODE 0x00000004 +#define ECNTRL_SGMII_MODE 0x00000002 #define MRBLR_INIT_SETTINGS DEFAULT_RX_BUFFER_SIZE diff --git a/drivers/net/hamradio/6pack.c b/drivers/net/hamradio/6pack.c index 86b3bb9bec2..92420f007b9 100644 --- a/drivers/net/hamradio/6pack.c +++ b/drivers/net/hamradio/6pack.c @@ -914,7 +914,7 @@ static void decode_prio_command(struct sixpack *sp, unsigned char cmd) printk(KERN_DEBUG "6pack: protocol violation\n"); else sp->status = 0; - cmd &= !SIXP_RX_DCD_MASK; + cmd &= ~SIXP_RX_DCD_MASK; } sp->status = cmd & SIXP_PRIO_DATA_MASK; } else { /* output watchdog char if idle */ diff --git a/drivers/net/hydra.c b/drivers/net/hydra.c index 91326ea3e12..f970bfbb9db 100644 --- a/drivers/net/hydra.c +++ b/drivers/net/hydra.c @@ -31,7 +31,16 @@ #include <asm/amigahw.h> #include <linux/zorro.h> -#include "8390.h" +#define EI_SHIFT(x) (ei_local->reg_offset[x]) +#define ei_inb(port) in_8(port) +#define ei_outb(val,port) out_8(port,val) +#define ei_inb_p(port) in_8(port) +#define ei_outb_p(val,port) out_8(port,val) + +static const char version[] = + "8390.c:v1.10cvs 9/23/94 Donald Becker (becker@cesdis.gsfc.nasa.gov)\n"; + +#include "lib8390.c" #define NE_EN0_DCFG (0x0e*2) @@ -100,7 +109,7 @@ static int __devinit hydra_init(struct zorro_dev *z) 0x10, 0x12, 0x14, 0x16, 0x18, 0x1a, 0x1c, 0x1e, }; - dev = alloc_ei_netdev(); + dev = ____alloc_ei_netdev(0); if (!dev) return -ENOMEM; SET_MODULE_OWNER(dev); @@ -117,7 +126,7 @@ static int __devinit hydra_init(struct zorro_dev *z) dev->irq = IRQ_AMIGA_PORTS; /* Install the Interrupt handler */ - if (request_irq(IRQ_AMIGA_PORTS, ei_interrupt, IRQF_SHARED, "Hydra Ethernet", + if (request_irq(IRQ_AMIGA_PORTS, __ei_interrupt, IRQF_SHARED, "Hydra Ethernet", dev)) { free_netdev(dev); return -EAGAIN; @@ -139,10 +148,10 @@ static int __devinit hydra_init(struct zorro_dev *z) dev->open = &hydra_open; dev->stop = &hydra_close; #ifdef CONFIG_NET_POLL_CONTROLLER - dev->poll_controller = ei_poll; + dev->poll_controller = __ei_poll; #endif - NS8390_init(dev, 0); + __NS8390_init(dev, 0); err = register_netdev(dev); if (err) { @@ -164,7 +173,7 @@ static int __devinit hydra_init(struct zorro_dev *z) static int hydra_open(struct net_device *dev) { - ei_open(dev); + __ei_open(dev); return 0; } @@ -172,7 +181,7 @@ static int hydra_close(struct net_device *dev) { if (ei_debug > 1) printk(KERN_DEBUG "%s: Shutting down ethercard.\n", dev->name); - ei_close(dev); + __ei_close(dev); return 0; } diff --git a/drivers/net/ioc3-eth.c b/drivers/net/ioc3-eth.c index f56b00ee385..f0d30cf67b5 100644 --- a/drivers/net/ioc3-eth.c +++ b/drivers/net/ioc3-eth.c @@ -57,7 +57,6 @@ #include <net/ip.h> #include <asm/byteorder.h> -#include <asm/checksum.h> #include <asm/io.h> #include <asm/pgtable.h> #include <asm/uaccess.h> diff --git a/drivers/net/irda/irda-usb.c b/drivers/net/irda/irda-usb.c index 14bda765c2f..6e95645e724 100644 --- a/drivers/net/irda/irda-usb.c +++ b/drivers/net/irda/irda-usb.c @@ -1793,10 +1793,8 @@ err_out_3: err_out_2: usb_free_urb(self->tx_urb); err_out_1: - for (i = 0; i < self->max_rx_urb; i++) { - if (self->rx_urb[i]) - usb_free_urb(self->rx_urb[i]); - } + for (i = 0; i < self->max_rx_urb; i++) + usb_free_urb(self->rx_urb[i]); free_netdev(net); err_out: return ret; diff --git a/drivers/net/ixgb/ixgb_main.c b/drivers/net/ixgb/ixgb_main.c index d1ebb91ed27..e628126c9c4 100644 --- a/drivers/net/ixgb/ixgb_main.c +++ b/drivers/net/ixgb/ixgb_main.c @@ -1248,7 +1248,7 @@ ixgb_tx_csum(struct ixgb_adapter *adapter, struct sk_buff *skb) if(likely(skb->ip_summed == CHECKSUM_PARTIAL)) { struct ixgb_buffer *buffer_info; css = skb->h.raw - skb->data; - cso = (skb->h.raw + skb->csum) - skb->data; + cso = css + skb->csum_offset; i = adapter->tx_ring.next_to_use; context_desc = IXGB_CONTEXT_DESC(adapter->tx_ring, i); diff --git a/drivers/net/lib8390.c b/drivers/net/lib8390.c new file mode 100644 index 00000000000..e726c06b8dc --- /dev/null +++ b/drivers/net/lib8390.c @@ -0,0 +1,1097 @@ +/* 8390.c: A general NS8390 ethernet driver core for linux. */ +/* + Written 1992-94 by Donald Becker. + + Copyright 1993 United States Government as represented by the + Director, National Security Agency. + + This software may be used and distributed according to the terms + of the GNU General Public License, incorporated herein by reference. + + The author may be reached as becker@scyld.com, or C/O + Scyld Computing Corporation + 410 Severn Ave., Suite 210 + Annapolis MD 21403 + + + This is the chip-specific code for many 8390-based ethernet adaptors. + This is not a complete driver, it must be combined with board-specific + code such as ne.c, wd.c, 3c503.c, etc. + + Seeing how at least eight drivers use this code, (not counting the + PCMCIA ones either) it is easy to break some card by what seems like + a simple innocent change. Please contact me or Donald if you think + you have found something that needs changing. -- PG + + + Changelog: + + Paul Gortmaker : remove set_bit lock, other cleanups. + Paul Gortmaker : add ei_get_8390_hdr() so we can pass skb's to + ei_block_input() for eth_io_copy_and_sum(). + Paul Gortmaker : exchange static int ei_pingpong for a #define, + also add better Tx error handling. + Paul Gortmaker : rewrite Rx overrun handling as per NS specs. + Alexey Kuznetsov : use the 8390's six bit hash multicast filter. + Paul Gortmaker : tweak ANK's above multicast changes a bit. + Paul Gortmaker : update packet statistics for v2.1.x + Alan Cox : support arbitary stupid port mappings on the + 68K Macintosh. Support >16bit I/O spaces + Paul Gortmaker : add kmod support for auto-loading of the 8390 + module by all drivers that require it. + Alan Cox : Spinlocking work, added 'BUG_83C690' + Paul Gortmaker : Separate out Tx timeout code from Tx path. + Paul Gortmaker : Remove old unused single Tx buffer code. + Hayato Fujiwara : Add m32r support. + Paul Gortmaker : use skb_padto() instead of stack scratch area + + Sources: + The National Semiconductor LAN Databook, and the 3Com 3c503 databook. + + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/jiffies.h> +#include <linux/fs.h> +#include <linux/types.h> +#include <linux/string.h> +#include <linux/bitops.h> +#include <asm/system.h> +#include <asm/uaccess.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/fcntl.h> +#include <linux/in.h> +#include <linux/interrupt.h> +#include <linux/init.h> +#include <linux/crc32.h> + +#include <linux/netdevice.h> +#include <linux/etherdevice.h> + +#define NS8390_CORE +#include "8390.h" + +#define BUG_83C690 + +/* These are the operational function interfaces to board-specific + routines. + void reset_8390(struct net_device *dev) + Resets the board associated with DEV, including a hardware reset of + the 8390. This is only called when there is a transmit timeout, and + it is always followed by 8390_init(). + void block_output(struct net_device *dev, int count, const unsigned char *buf, + int start_page) + Write the COUNT bytes of BUF to the packet buffer at START_PAGE. The + "page" value uses the 8390's 256-byte pages. + void get_8390_hdr(struct net_device *dev, struct e8390_hdr *hdr, int ring_page) + Read the 4 byte, page aligned 8390 header. *If* there is a + subsequent read, it will be of the rest of the packet. + void block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset) + Read COUNT bytes from the packet buffer into the skb data area. Start + reading from RING_OFFSET, the address as the 8390 sees it. This will always + follow the read of the 8390 header. +*/ +#define ei_reset_8390 (ei_local->reset_8390) +#define ei_block_output (ei_local->block_output) +#define ei_block_input (ei_local->block_input) +#define ei_get_8390_hdr (ei_local->get_8390_hdr) + +/* use 0 for production, 1 for verification, >2 for debug */ +#ifndef ei_debug +int ei_debug = 1; +#endif + +/* Index to functions. */ +static void ei_tx_intr(struct net_device *dev); +static void ei_tx_err(struct net_device *dev); +static void ei_tx_timeout(struct net_device *dev); +static void ei_receive(struct net_device *dev); +static void ei_rx_overrun(struct net_device *dev); + +/* Routines generic to NS8390-based boards. */ +static void NS8390_trigger_send(struct net_device *dev, unsigned int length, + int start_page); +static void set_multicast_list(struct net_device *dev); +static void do_set_multicast_list(struct net_device *dev); +static void __NS8390_init(struct net_device *dev, int startp); + +/* + * SMP and the 8390 setup. + * + * The 8390 isnt exactly designed to be multithreaded on RX/TX. There is + * a page register that controls bank and packet buffer access. We guard + * this with ei_local->page_lock. Nobody should assume or set the page other + * than zero when the lock is not held. Lock holders must restore page 0 + * before unlocking. Even pure readers must take the lock to protect in + * page 0. + * + * To make life difficult the chip can also be very slow. We therefore can't + * just use spinlocks. For the longer lockups we disable the irq the device + * sits on and hold the lock. We must hold the lock because there is a dual + * processor case other than interrupts (get stats/set multicast list in + * parallel with each other and transmit). + * + * Note: in theory we can just disable the irq on the card _but_ there is + * a latency on SMP irq delivery. So we can easily go "disable irq" "sync irqs" + * enter lock, take the queued irq. So we waddle instead of flying. + * + * Finally by special arrangement for the purpose of being generally + * annoying the transmit function is called bh atomic. That places + * restrictions on the user context callers as disable_irq won't save + * them. + */ + + + +/** + * ei_open - Open/initialize the board. + * @dev: network device to initialize + * + * This routine goes all-out, setting everything + * up anew at each open, even though many of these registers should only + * need to be set once at boot. + */ +static int __ei_open(struct net_device *dev) +{ + unsigned long flags; + struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev); + + /* The card I/O part of the driver (e.g. 3c503) can hook a Tx timeout + wrapper that does e.g. media check & then calls ei_tx_timeout. */ + if (dev->tx_timeout == NULL) + dev->tx_timeout = ei_tx_timeout; + if (dev->watchdog_timeo <= 0) + dev->watchdog_timeo = TX_TIMEOUT; + + /* + * Grab the page lock so we own the register set, then call + * the init function. + */ + + spin_lock_irqsave(&ei_local->page_lock, flags); + __NS8390_init(dev, 1); + /* Set the flag before we drop the lock, That way the IRQ arrives + after its set and we get no silly warnings */ + netif_start_queue(dev); + spin_unlock_irqrestore(&ei_local->page_lock, flags); + ei_local->irqlock = 0; + return 0; +} + +/** + * ei_close - shut down network device + * @dev: network device to close + * + * Opposite of ei_open(). Only used when "ifconfig <devname> down" is done. + */ +static int __ei_close(struct net_device *dev) +{ + struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev); + unsigned long flags; + + /* + * Hold the page lock during close + */ + + spin_lock_irqsave(&ei_local->page_lock, flags); + __NS8390_init(dev, 0); + spin_unlock_irqrestore(&ei_local->page_lock, flags); + netif_stop_queue(dev); + return 0; +} + +/** + * ei_tx_timeout - handle transmit time out condition + * @dev: network device which has apparently fallen asleep + * + * Called by kernel when device never acknowledges a transmit has + * completed (or failed) - i.e. never posted a Tx related interrupt. + */ + +static void ei_tx_timeout(struct net_device *dev) +{ + unsigned long e8390_base = dev->base_addr; + struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev); + int txsr, isr, tickssofar = jiffies - dev->trans_start; + unsigned long flags; + +#if defined(CONFIG_M32R) && defined(CONFIG_SMP) + unsigned long icucr; + + local_irq_save(flags); + icucr = inl(M32R_ICU_CR1_PORTL); + icucr |= M32R_ICUCR_ISMOD11; + outl(icucr, M32R_ICU_CR1_PORTL); + local_irq_restore(flags); +#endif + ei_local->stat.tx_errors++; + + spin_lock_irqsave(&ei_local->page_lock, flags); + txsr = ei_inb(e8390_base+EN0_TSR); + isr = ei_inb(e8390_base+EN0_ISR); + spin_unlock_irqrestore(&ei_local->page_lock, flags); + + printk(KERN_DEBUG "%s: Tx timed out, %s TSR=%#2x, ISR=%#2x, t=%d.\n", + dev->name, (txsr & ENTSR_ABT) ? "excess collisions." : + (isr) ? "lost interrupt?" : "cable problem?", txsr, isr, tickssofar); + + if (!isr && !ei_local->stat.tx_packets) + { + /* The 8390 probably hasn't gotten on the cable yet. */ + ei_local->interface_num ^= 1; /* Try a different xcvr. */ + } + + /* Ugly but a reset can be slow, yet must be protected */ + + disable_irq_nosync_lockdep(dev->irq); + spin_lock(&ei_local->page_lock); + + /* Try to restart the card. Perhaps the user has fixed something. */ + ei_reset_8390(dev); + __NS8390_init(dev, 1); + + spin_unlock(&ei_local->page_lock); + enable_irq_lockdep(dev->irq); + netif_wake_queue(dev); +} + +/** + * ei_start_xmit - begin packet transmission + * @skb: packet to be sent + * @dev: network device to which packet is sent + * + * Sends a packet to an 8390 network device. + */ + +static int ei_start_xmit(struct sk_buff *skb, struct net_device *dev) +{ + unsigned long e8390_base = dev->base_addr; + struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev); + int send_length = skb->len, output_page; + unsigned long flags; + char buf[ETH_ZLEN]; + char *data = skb->data; + + if (skb->len < ETH_ZLEN) { + memset(buf, 0, ETH_ZLEN); /* more efficient than doing just the needed bits */ + memcpy(buf, data, skb->len); + send_length = ETH_ZLEN; + data = buf; + } + + /* Mask interrupts from the ethercard. + SMP: We have to grab the lock here otherwise the IRQ handler + on another CPU can flip window and race the IRQ mask set. We end + up trashing the mcast filter not disabling irqs if we don't lock */ + + spin_lock_irqsave(&ei_local->page_lock, flags); + ei_outb_p(0x00, e8390_base + EN0_IMR); + spin_unlock_irqrestore(&ei_local->page_lock, flags); + + + /* + * Slow phase with lock held. + */ + + disable_irq_nosync_lockdep_irqsave(dev->irq, &flags); + + spin_lock(&ei_local->page_lock); + + ei_local->irqlock = 1; + + /* + * We have two Tx slots available for use. Find the first free + * slot, and then perform some sanity checks. With two Tx bufs, + * you get very close to transmitting back-to-back packets. With + * only one Tx buf, the transmitter sits idle while you reload the + * card, leaving a substantial gap between each transmitted packet. + */ + + if (ei_local->tx1 == 0) + { + output_page = ei_local->tx_start_page; + ei_local->tx1 = send_length; + if (ei_debug && ei_local->tx2 > 0) + printk(KERN_DEBUG "%s: idle transmitter tx2=%d, lasttx=%d, txing=%d.\n", + dev->name, ei_local->tx2, ei_local->lasttx, ei_local->txing); + } + else if (ei_local->tx2 == 0) + { + output_page = ei_local->tx_start_page + TX_PAGES/2; + ei_local->tx2 = send_length; + if (ei_debug && ei_local->tx1 > 0) + printk(KERN_DEBUG "%s: idle transmitter, tx1=%d, lasttx=%d, txing=%d.\n", + dev->name, ei_local->tx1, ei_local->lasttx, ei_local->txing); + } + else + { /* We should never get here. */ + if (ei_debug) + printk(KERN_DEBUG "%s: No Tx buffers free! tx1=%d tx2=%d last=%d\n", + dev->name, ei_local->tx1, ei_local->tx2, ei_local->lasttx); + ei_local->irqlock = 0; + netif_stop_queue(dev); + ei_outb_p(ENISR_ALL, e8390_base + EN0_IMR); + spin_unlock(&ei_local->page_lock); + enable_irq_lockdep_irqrestore(dev->irq, &flags); + ei_local->stat.tx_errors++; + return 1; + } + + /* + * Okay, now upload the packet and trigger a send if the transmitter + * isn't already sending. If it is busy, the interrupt handler will + * trigger the send later, upon receiving a Tx done interrupt. + */ + + ei_block_output(dev, send_length, data, output_page); + + if (! ei_local->txing) + { + ei_local->txing = 1; + NS8390_trigger_send(dev, send_length, output_page); + dev->trans_start = jiffies; + if (output_page == ei_local->tx_start_page) + { + ei_local->tx1 = -1; + ei_local->lasttx = -1; + } + else + { + ei_local->tx2 = -1; + ei_local->lasttx = -2; + } + } + else ei_local->txqueue++; + + if (ei_local->tx1 && ei_local->tx2) + netif_stop_queue(dev); + else + netif_start_queue(dev); + + /* Turn 8390 interrupts back on. */ + ei_local->irqlock = 0; + ei_outb_p(ENISR_ALL, e8390_base + EN0_IMR); + + spin_unlock(&ei_local->page_lock); + enable_irq_lockdep_irqrestore(dev->irq, &flags); + + dev_kfree_skb (skb); + ei_local->stat.tx_bytes += send_length; + + return 0; +} + +/** + * ei_interrupt - handle the interrupts from an 8390 + * @irq: interrupt number + * @dev_id: a pointer to the net_device + * + * Handle the ether interface interrupts. We pull packets from + * the 8390 via the card specific functions and fire them at the networking + * stack. We also handle transmit completions and wake the transmit path if + * necessary. We also update the counters and do other housekeeping as + * needed. + */ + +static irqreturn_t __ei_interrupt(int irq, void *dev_id) +{ + struct net_device *dev = dev_id; + unsigned long e8390_base = dev->base_addr; + int interrupts, nr_serviced = 0; + struct ei_device *ei_local = netdev_priv(dev); + + /* + * Protect the irq test too. + */ + + spin_lock(&ei_local->page_lock); + + if (ei_local->irqlock) + { +#if 1 /* This might just be an interrupt for a PCI device sharing this line */ + /* The "irqlock" check is only for testing. */ + printk(ei_local->irqlock + ? "%s: Interrupted while interrupts are masked! isr=%#2x imr=%#2x.\n" + : "%s: Reentering the interrupt handler! isr=%#2x imr=%#2x.\n", + dev->name, ei_inb_p(e8390_base + EN0_ISR), + ei_inb_p(e8390_base + EN0_IMR)); +#endif + spin_unlock(&ei_local->page_lock); + return IRQ_NONE; + } + + /* Change to page 0 and read the intr status reg. */ + ei_outb_p(E8390_NODMA+E8390_PAGE0, e8390_base + E8390_CMD); + if (ei_debug > 3) + printk(KERN_DEBUG "%s: interrupt(isr=%#2.2x).\n", dev->name, + ei_inb_p(e8390_base + EN0_ISR)); + + /* !!Assumption!! -- we stay in page 0. Don't break this. */ + while ((interrupts = ei_inb_p(e8390_base + EN0_ISR)) != 0 + && ++nr_serviced < MAX_SERVICE) + { + if (!netif_running(dev)) { + printk(KERN_WARNING "%s: interrupt from stopped card\n", dev->name); + /* rmk - acknowledge the interrupts */ + ei_outb_p(interrupts, e8390_base + EN0_ISR); + interrupts = 0; + break; + } + if (interrupts & ENISR_OVER) + ei_rx_overrun(dev); + else if (interrupts & (ENISR_RX+ENISR_RX_ERR)) + { + /* Got a good (?) packet. */ + ei_receive(dev); + } + /* Push the next to-transmit packet through. */ + if (interrupts & ENISR_TX) + ei_tx_intr(dev); + else if (interrupts & ENISR_TX_ERR) + ei_tx_err(dev); + + if (interrupts & ENISR_COUNTERS) + { + ei_local->stat.rx_frame_errors += ei_inb_p(e8390_base + EN0_COUNTER0); + ei_local->stat.rx_crc_errors += ei_inb_p(e8390_base + EN0_COUNTER1); + ei_local->stat.rx_missed_errors+= ei_inb_p(e8390_base + EN0_COUNTER2); + ei_outb_p(ENISR_COUNTERS, e8390_base + EN0_ISR); /* Ack intr. */ + } + + /* Ignore any RDC interrupts that make it back to here. */ + if (interrupts & ENISR_RDC) + { + ei_outb_p(ENISR_RDC, e8390_base + EN0_ISR); + } + + ei_outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, e8390_base + E8390_CMD); + } + + if (interrupts && ei_debug) + { + ei_outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, e8390_base + E8390_CMD); + if (nr_serviced >= MAX_SERVICE) + { + /* 0xFF is valid for a card removal */ + if(interrupts!=0xFF) + printk(KERN_WARNING "%s: Too much work at interrupt, status %#2.2x\n", + dev->name, interrupts); + ei_outb_p(ENISR_ALL, e8390_base + EN0_ISR); /* Ack. most intrs. */ + } else { + printk(KERN_WARNING "%s: unknown interrupt %#2x\n", dev->name, interrupts); + ei_outb_p(0xff, e8390_base + EN0_ISR); /* Ack. all intrs. */ + } + } + spin_unlock(&ei_local->page_lock); + return IRQ_RETVAL(nr_serviced > 0); +} + +#ifdef CONFIG_NET_POLL_CONTROLLER +static void __ei_poll(struct net_device *dev) +{ + disable_irq_lockdep(dev->irq); + __ei_interrupt(dev->irq, dev); + enable_irq_lockdep(dev->irq); +} +#endif + +/** + * ei_tx_err - handle transmitter error + * @dev: network device which threw the exception + * + * A transmitter error has happened. Most likely excess collisions (which + * is a fairly normal condition). If the error is one where the Tx will + * have been aborted, we try and send another one right away, instead of + * letting the failed packet sit and collect dust in the Tx buffer. This + * is a much better solution as it avoids kernel based Tx timeouts, and + * an unnecessary card reset. + * + * Called with lock held. + */ + +static void ei_tx_err(struct net_device *dev) +{ + unsigned long e8390_base = dev->base_addr; + struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev); + unsigned char txsr = ei_inb_p(e8390_base+EN0_TSR); + unsigned char tx_was_aborted = txsr & (ENTSR_ABT+ENTSR_FU); + +#ifdef VERBOSE_ERROR_DUMP + printk(KERN_DEBUG "%s: transmitter error (%#2x): ", dev->name, txsr); + if (txsr & ENTSR_ABT) + printk("excess-collisions "); + if (txsr & ENTSR_ND) + printk("non-deferral "); + if (txsr & ENTSR_CRS) + printk("lost-carrier "); + if (txsr & ENTSR_FU) + printk("FIFO-underrun "); + if (txsr & ENTSR_CDH) + printk("lost-heartbeat "); + printk("\n"); +#endif + + ei_outb_p(ENISR_TX_ERR, e8390_base + EN0_ISR); /* Ack intr. */ + + if (tx_was_aborted) + ei_tx_intr(dev); + else + { + ei_local->stat.tx_errors++; + if (txsr & ENTSR_CRS) ei_local->stat.tx_carrier_errors++; + if (txsr & ENTSR_CDH) ei_local->stat.tx_heartbeat_errors++; + if (txsr & ENTSR_OWC) ei_local->stat.tx_window_errors++; + } +} + +/** + * ei_tx_intr - transmit interrupt handler + * @dev: network device for which tx intr is handled + * + * We have finished a transmit: check for errors and then trigger the next + * packet to be sent. Called with lock held. + */ + +static void ei_tx_intr(struct net_device *dev) +{ + unsigned long e8390_base = dev->base_addr; + struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev); + int status = ei_inb(e8390_base + EN0_TSR); + + ei_outb_p(ENISR_TX, e8390_base + EN0_ISR); /* Ack intr. */ + + /* + * There are two Tx buffers, see which one finished, and trigger + * the send of another one if it exists. + */ + ei_local->txqueue--; + + if (ei_local->tx1 < 0) + { + if (ei_local->lasttx != 1 && ei_local->lasttx != -1) + printk(KERN_ERR "%s: bogus last_tx_buffer %d, tx1=%d.\n", + ei_local->name, ei_local->lasttx, ei_local->tx1); + ei_local->tx1 = 0; + if (ei_local->tx2 > 0) + { + ei_local->txing = 1; + NS8390_trigger_send(dev, ei_local->tx2, ei_local->tx_start_page + 6); + dev->trans_start = jiffies; + ei_local->tx2 = -1, + ei_local->lasttx = 2; + } + else ei_local->lasttx = 20, ei_local->txing = 0; + } + else if (ei_local->tx2 < 0) + { + if (ei_local->lasttx != 2 && ei_local->lasttx != -2) + printk("%s: bogus last_tx_buffer %d, tx2=%d.\n", + ei_local->name, ei_local->lasttx, ei_local->tx2); + ei_local->tx2 = 0; + if (ei_local->tx1 > 0) + { + ei_local->txing = 1; + NS8390_trigger_send(dev, ei_local->tx1, ei_local->tx_start_page); + dev->trans_start = jiffies; + ei_local->tx1 = -1; + ei_local->lasttx = 1; + } + else + ei_local->lasttx = 10, ei_local->txing = 0; + } +// else printk(KERN_WARNING "%s: unexpected TX-done interrupt, lasttx=%d.\n", +// dev->name, ei_local->lasttx); + + /* Minimize Tx latency: update the statistics after we restart TXing. */ + if (status & ENTSR_COL) + ei_local->stat.collisions++; + if (status & ENTSR_PTX) + ei_local->stat.tx_packets++; + else + { + ei_local->stat.tx_errors++; + if (status & ENTSR_ABT) + { + ei_local->stat.tx_aborted_errors++; + ei_local->stat.collisions += 16; + } + if (status & ENTSR_CRS) + ei_local->stat.tx_carrier_errors++; + if (status & ENTSR_FU) + ei_local->stat.tx_fifo_errors++; + if (status & ENTSR_CDH) + ei_local->stat.tx_heartbeat_errors++; + if (status & ENTSR_OWC) + ei_local->stat.tx_window_errors++; + } + netif_wake_queue(dev); +} + +/** + * ei_receive - receive some packets + * @dev: network device with which receive will be run + * + * We have a good packet(s), get it/them out of the buffers. + * Called with lock held. + */ + +static void ei_receive(struct net_device *dev) +{ + unsigned long e8390_base = dev->base_addr; + struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev); + unsigned char rxing_page, this_frame, next_frame; + unsigned short current_offset; + int rx_pkt_count = 0; + struct e8390_pkt_hdr rx_frame; + int num_rx_pages = ei_local->stop_page-ei_local->rx_start_page; + + while (++rx_pkt_count < 10) + { + int pkt_len, pkt_stat; + + /* Get the rx page (incoming packet pointer). */ + ei_outb_p(E8390_NODMA+E8390_PAGE1, e8390_base + E8390_CMD); + rxing_page = ei_inb_p(e8390_base + EN1_CURPAG); + ei_outb_p(E8390_NODMA+E8390_PAGE0, e8390_base + E8390_CMD); + + /* Remove one frame from the ring. Boundary is always a page behind. */ + this_frame = ei_inb_p(e8390_base + EN0_BOUNDARY) + 1; + if (this_frame >= ei_local->stop_page) + this_frame = ei_local->rx_start_page; + + /* Someday we'll omit the previous, iff we never get this message. + (There is at least one clone claimed to have a problem.) + + Keep quiet if it looks like a card removal. One problem here + is that some clones crash in roughly the same way. + */ + if (ei_debug > 0 && this_frame != ei_local->current_page && (this_frame!=0x0 || rxing_page!=0xFF)) + printk(KERN_ERR "%s: mismatched read page pointers %2x vs %2x.\n", + dev->name, this_frame, ei_local->current_page); + + if (this_frame == rxing_page) /* Read all the frames? */ + break; /* Done for now */ + + current_offset = this_frame << 8; + ei_get_8390_hdr(dev, &rx_frame, this_frame); + + pkt_len = rx_frame.count - sizeof(struct e8390_pkt_hdr); + pkt_stat = rx_frame.status; + + next_frame = this_frame + 1 + ((pkt_len+4)>>8); + + /* Check for bogosity warned by 3c503 book: the status byte is never + written. This happened a lot during testing! This code should be + cleaned up someday. */ + if (rx_frame.next != next_frame + && rx_frame.next != next_frame + 1 + && rx_frame.next != next_frame - num_rx_pages + && rx_frame.next != next_frame + 1 - num_rx_pages) { + ei_local->current_page = rxing_page; + ei_outb(ei_local->current_page-1, e8390_base+EN0_BOUNDARY); + ei_local->stat.rx_errors++; + continue; + } + + if (pkt_len < 60 || pkt_len > 1518) + { + if (ei_debug) + printk(KERN_DEBUG "%s: bogus packet size: %d, status=%#2x nxpg=%#2x.\n", + dev->name, rx_frame.count, rx_frame.status, + rx_frame.next); + ei_local->stat.rx_errors++; + ei_local->stat.rx_length_errors++; + } + else if ((pkt_stat & 0x0F) == ENRSR_RXOK) + { + struct sk_buff *skb; + + skb = dev_alloc_skb(pkt_len+2); + if (skb == NULL) + { + if (ei_debug > 1) + printk(KERN_DEBUG "%s: Couldn't allocate a sk_buff of size %d.\n", + dev->name, pkt_len); + ei_local->stat.rx_dropped++; + break; + } + else + { + skb_reserve(skb,2); /* IP headers on 16 byte boundaries */ + skb->dev = dev; + skb_put(skb, pkt_len); /* Make room */ + ei_block_input(dev, pkt_len, skb, current_offset + sizeof(rx_frame)); + skb->protocol=eth_type_trans(skb,dev); + netif_rx(skb); + dev->last_rx = jiffies; + ei_local->stat.rx_packets++; + ei_local->stat.rx_bytes += pkt_len; + if (pkt_stat & ENRSR_PHY) + ei_local->stat.multicast++; + } + } + else + { + if (ei_debug) + printk(KERN_DEBUG "%s: bogus packet: status=%#2x nxpg=%#2x size=%d\n", + dev->name, rx_frame.status, rx_frame.next, + rx_frame.count); + ei_local->stat.rx_errors++; + /* NB: The NIC counts CRC, frame and missed errors. */ + if (pkt_stat & ENRSR_FO) + ei_local->stat.rx_fifo_errors++; + } + next_frame = rx_frame.next; + + /* This _should_ never happen: it's here for avoiding bad clones. */ + if (next_frame >= ei_local->stop_page) { + printk("%s: next frame inconsistency, %#2x\n", dev->name, + next_frame); + next_frame = ei_local->rx_start_page; + } + ei_local->current_page = next_frame; + ei_outb_p(next_frame-1, e8390_base+EN0_BOUNDARY); + } + + /* We used to also ack ENISR_OVER here, but that would sometimes mask + a real overrun, leaving the 8390 in a stopped state with rec'vr off. */ + ei_outb_p(ENISR_RX+ENISR_RX_ERR, e8390_base+EN0_ISR); + return; +} + +/** + * ei_rx_overrun - handle receiver overrun + * @dev: network device which threw exception + * + * We have a receiver overrun: we have to kick the 8390 to get it started + * again. Problem is that you have to kick it exactly as NS prescribes in + * the updated datasheets, or "the NIC may act in an unpredictable manner." + * This includes causing "the NIC to defer indefinitely when it is stopped + * on a busy network." Ugh. + * Called with lock held. Don't call this with the interrupts off or your + * computer will hate you - it takes 10ms or so. + */ + +static void ei_rx_overrun(struct net_device *dev) +{ + unsigned long e8390_base = dev->base_addr; + unsigned char was_txing, must_resend = 0; + struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev); + + /* + * Record whether a Tx was in progress and then issue the + * stop command. + */ + was_txing = ei_inb_p(e8390_base+E8390_CMD) & E8390_TRANS; + ei_outb_p(E8390_NODMA+E8390_PAGE0+E8390_STOP, e8390_base+E8390_CMD); + + if (ei_debug > 1) + printk(KERN_DEBUG "%s: Receiver overrun.\n", dev->name); + ei_local->stat.rx_over_errors++; + + /* + * Wait a full Tx time (1.2ms) + some guard time, NS says 1.6ms total. + * Early datasheets said to poll the reset bit, but now they say that + * it "is not a reliable indicator and subsequently should be ignored." + * We wait at least 10ms. + */ + + mdelay(10); + + /* + * Reset RBCR[01] back to zero as per magic incantation. + */ + ei_outb_p(0x00, e8390_base+EN0_RCNTLO); + ei_outb_p(0x00, e8390_base+EN0_RCNTHI); + + /* + * See if any Tx was interrupted or not. According to NS, this + * step is vital, and skipping it will cause no end of havoc. + */ + + if (was_txing) + { + unsigned char tx_completed = ei_inb_p(e8390_base+EN0_ISR) & (ENISR_TX+ENISR_TX_ERR); + if (!tx_completed) + must_resend = 1; + } + + /* + * Have to enter loopback mode and then restart the NIC before + * you are allowed to slurp packets up off the ring. + */ + ei_outb_p(E8390_TXOFF, e8390_base + EN0_TXCR); + ei_outb_p(E8390_NODMA + E8390_PAGE0 + E8390_START, e8390_base + E8390_CMD); + + /* + * Clear the Rx ring of all the debris, and ack the interrupt. + */ + ei_receive(dev); + ei_outb_p(ENISR_OVER, e8390_base+EN0_ISR); + + /* + * Leave loopback mode, and resend any packet that got stopped. + */ + ei_outb_p(E8390_TXCONFIG, e8390_base + EN0_TXCR); + if (must_resend) + ei_outb_p(E8390_NODMA + E8390_PAGE0 + E8390_START + E8390_TRANS, e8390_base + E8390_CMD); +} + +/* + * Collect the stats. This is called unlocked and from several contexts. + */ + +static struct net_device_stats *get_stats(struct net_device *dev) +{ + unsigned long ioaddr = dev->base_addr; + struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev); + unsigned long flags; + + /* If the card is stopped, just return the present stats. */ + if (!netif_running(dev)) + return &ei_local->stat; + + spin_lock_irqsave(&ei_local->page_lock,flags); + /* Read the counter registers, assuming we are in page 0. */ + ei_local->stat.rx_frame_errors += ei_inb_p(ioaddr + EN0_COUNTER0); + ei_local->stat.rx_crc_errors += ei_inb_p(ioaddr + EN0_COUNTER1); + ei_local->stat.rx_missed_errors+= ei_inb_p(ioaddr + EN0_COUNTER2); + spin_unlock_irqrestore(&ei_local->page_lock, flags); + + return &ei_local->stat; +} + +/* + * Form the 64 bit 8390 multicast table from the linked list of addresses + * associated with this dev structure. + */ + +static inline void make_mc_bits(u8 *bits, struct net_device *dev) +{ + struct dev_mc_list *dmi; + + for (dmi=dev->mc_list; dmi; dmi=dmi->next) + { + u32 crc; + if (dmi->dmi_addrlen != ETH_ALEN) + { + printk(KERN_INFO "%s: invalid multicast address length given.\n", dev->name); + continue; + } + crc = ether_crc(ETH_ALEN, dmi->dmi_addr); + /* + * The 8390 uses the 6 most significant bits of the + * CRC to index the multicast table. + */ + bits[crc>>29] |= (1<<((crc>>26)&7)); + } +} + +/** + * do_set_multicast_list - set/clear multicast filter + * @dev: net device for which multicast filter is adjusted + * + * Set or clear the multicast filter for this adaptor. May be called + * from a BH in 2.1.x. Must be called with lock held. + */ + +static void do_set_multicast_list(struct net_device *dev) +{ + unsigned long e8390_base = dev->base_addr; + int i; + struct ei_device *ei_local = (struct ei_device*)netdev_priv(dev); + + if (!(dev->flags&(IFF_PROMISC|IFF_ALLMULTI))) + { + memset(ei_local->mcfilter, 0, 8); + if (dev->mc_list) + make_mc_bits(ei_local->mcfilter, dev); + } + else + memset(ei_local->mcfilter, 0xFF, 8); /* mcast set to accept-all */ + + /* + * DP8390 manuals don't specify any magic sequence for altering + * the multicast regs on an already running card. To be safe, we + * ensure multicast mode is off prior to loading up the new hash + * table. If this proves to be not enough, we can always resort + * to stopping the NIC, loading the table and then restarting. + * + * Bug Alert! The MC regs on the SMC 83C690 (SMC Elite and SMC + * Elite16) appear to be write-only. The NS 8390 data sheet lists + * them as r/w so this is a bug. The SMC 83C790 (SMC Ultra and + * Ultra32 EISA) appears to have this bug fixed. + */ + + if (netif_running(dev)) + ei_outb_p(E8390_RXCONFIG, e8390_base + EN0_RXCR); + ei_outb_p(E8390_NODMA + E8390_PAGE1, e8390_base + E8390_CMD); + for(i = 0; i < 8; i++) + { + ei_outb_p(ei_local->mcfilter[i], e8390_base + EN1_MULT_SHIFT(i)); +#ifndef BUG_83C690 + if(ei_inb_p(e8390_base + EN1_MULT_SHIFT(i))!=ei_local->mcfilter[i]) + printk(KERN_ERR "Multicast filter read/write mismap %d\n",i); +#endif + } + ei_outb_p(E8390_NODMA + E8390_PAGE0, e8390_base + E8390_CMD); + + if(dev->flags&IFF_PROMISC) + ei_outb_p(E8390_RXCONFIG | 0x18, e8390_base + EN0_RXCR); + else if(dev->flags&IFF_ALLMULTI || dev->mc_list) + ei_outb_p(E8390_RXCONFIG | 0x08, e8390_base + EN0_RXCR); + else + ei_outb_p(E8390_RXCONFIG, e8390_base + EN0_RXCR); + } + +/* + * Called without lock held. This is invoked from user context and may + * be parallel to just about everything else. Its also fairly quick and + * not called too often. Must protect against both bh and irq users + */ + +static void set_multicast_list(struct net_device *dev) +{ + unsigned long flags; + struct ei_device *ei_local = (struct ei_device*)netdev_priv(dev); + + spin_lock_irqsave(&ei_local->page_lock, flags); + do_set_multicast_list(dev); + spin_unlock_irqrestore(&ei_local->page_lock, flags); +} + +/** + * ethdev_setup - init rest of 8390 device struct + * @dev: network device structure to init + * + * Initialize the rest of the 8390 device structure. Do NOT __init + * this, as it is used by 8390 based modular drivers too. + */ + +static void ethdev_setup(struct net_device *dev) +{ + struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev); + if (ei_debug > 1) + printk(version); + + dev->hard_start_xmit = &ei_start_xmit; + dev->get_stats = get_stats; + dev->set_multicast_list = &set_multicast_list; + + ether_setup(dev); + + spin_lock_init(&ei_local->page_lock); +} + +/** + * alloc_ei_netdev - alloc_etherdev counterpart for 8390 + * @size: extra bytes to allocate + * + * Allocate 8390-specific net_device. + */ +static struct net_device *____alloc_ei_netdev(int size) +{ + return alloc_netdev(sizeof(struct ei_device) + size, "eth%d", + ethdev_setup); +} + + + + +/* This page of functions should be 8390 generic */ +/* Follow National Semi's recommendations for initializing the "NIC". */ + +/** + * NS8390_init - initialize 8390 hardware + * @dev: network device to initialize + * @startp: boolean. non-zero value to initiate chip processing + * + * Must be called with lock held. + */ + +static void __NS8390_init(struct net_device *dev, int startp) +{ + unsigned long e8390_base = dev->base_addr; + struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev); + int i; + int endcfg = ei_local->word16 + ? (0x48 | ENDCFG_WTS | (ei_local->bigendian ? ENDCFG_BOS : 0)) + : 0x48; + + if(sizeof(struct e8390_pkt_hdr)!=4) + panic("8390.c: header struct mispacked\n"); + /* Follow National Semi's recommendations for initing the DP83902. */ + ei_outb_p(E8390_NODMA+E8390_PAGE0+E8390_STOP, e8390_base+E8390_CMD); /* 0x21 */ + ei_outb_p(endcfg, e8390_base + EN0_DCFG); /* 0x48 or 0x49 */ + /* Clear the remote byte count registers. */ + ei_outb_p(0x00, e8390_base + EN0_RCNTLO); + ei_outb_p(0x00, e8390_base + EN0_RCNTHI); + /* Set to monitor and loopback mode -- this is vital!. */ + ei_outb_p(E8390_RXOFF, e8390_base + EN0_RXCR); /* 0x20 */ + ei_outb_p(E8390_TXOFF, e8390_base + EN0_TXCR); /* 0x02 */ + /* Set the transmit page and receive ring. */ + ei_outb_p(ei_local->tx_start_page, e8390_base + EN0_TPSR); + ei_local->tx1 = ei_local->tx2 = 0; + ei_outb_p(ei_local->rx_start_page, e8390_base + EN0_STARTPG); + ei_outb_p(ei_local->stop_page-1, e8390_base + EN0_BOUNDARY); /* 3c503 says 0x3f,NS0x26*/ + ei_local->current_page = ei_local->rx_start_page; /* assert boundary+1 */ + ei_outb_p(ei_local->stop_page, e8390_base + EN0_STOPPG); + /* Clear the pending interrupts and mask. */ + ei_outb_p(0xFF, e8390_base + EN0_ISR); + ei_outb_p(0x00, e8390_base + EN0_IMR); + + /* Copy the station address into the DS8390 registers. */ + + ei_outb_p(E8390_NODMA + E8390_PAGE1 + E8390_STOP, e8390_base+E8390_CMD); /* 0x61 */ + for(i = 0; i < 6; i++) + { + ei_outb_p(dev->dev_addr[i], e8390_base + EN1_PHYS_SHIFT(i)); + if (ei_debug > 1 && ei_inb_p(e8390_base + EN1_PHYS_SHIFT(i))!=dev->dev_addr[i]) + printk(KERN_ERR "Hw. address read/write mismap %d\n",i); + } + + ei_outb_p(ei_local->rx_start_page, e8390_base + EN1_CURPAG); + ei_outb_p(E8390_NODMA+E8390_PAGE0+E8390_STOP, e8390_base+E8390_CMD); + + netif_start_queue(dev); + ei_local->tx1 = ei_local->tx2 = 0; + ei_local->txing = 0; + + if (startp) + { + ei_outb_p(0xff, e8390_base + EN0_ISR); + ei_outb_p(ENISR_ALL, e8390_base + EN0_IMR); + ei_outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, e8390_base+E8390_CMD); + ei_outb_p(E8390_TXCONFIG, e8390_base + EN0_TXCR); /* xmit on. */ + /* 3c503 TechMan says rxconfig only after the NIC is started. */ + ei_outb_p(E8390_RXCONFIG, e8390_base + EN0_RXCR); /* rx on, */ + do_set_multicast_list(dev); /* (re)load the mcast table */ + } +} + +/* Trigger a transmit start, assuming the length is valid. + Always called with the page lock held */ + +static void NS8390_trigger_send(struct net_device *dev, unsigned int length, + int start_page) +{ + unsigned long e8390_base = dev->base_addr; + struct ei_device *ei_local __attribute((unused)) = (struct ei_device *) netdev_priv(dev); + + ei_outb_p(E8390_NODMA+E8390_PAGE0, e8390_base+E8390_CMD); + + if (ei_inb_p(e8390_base + E8390_CMD) & E8390_TRANS) + { + printk(KERN_WARNING "%s: trigger_send() called with the transmitter busy.\n", + dev->name); + return; + } + ei_outb_p(length & 0xff, e8390_base + EN0_TCNTLO); + ei_outb_p(length >> 8, e8390_base + EN0_TCNTHI); + ei_outb_p(start_page, e8390_base + EN0_TPSR); + ei_outb_p(E8390_NODMA+E8390_TRANS+E8390_START, e8390_base+E8390_CMD); +} diff --git a/drivers/net/mac8390.c b/drivers/net/mac8390.c index ade6ff852e1..a12bb64e369 100644 --- a/drivers/net/mac8390.c +++ b/drivers/net/mac8390.c @@ -39,7 +39,16 @@ #include <asm/hwtest.h> #include <asm/macints.h> -#include "8390.h" +static char version[] = + "mac8390.c: v0.4 2001-05-15 David Huggins-Daines <dhd@debian.org> and others\n"; + +#define EI_SHIFT(x) (ei_local->reg_offset[x]) +#define ei_inb(port) in_8(port) +#define ei_outb(val,port) out_8(port,val) +#define ei_inb_p(port) in_8(port) +#define ei_outb_p(val,port) out_8(port,val) + +#include "lib8390.c" #define WD_START_PG 0x00 /* First page of TX buffer */ #define CABLETRON_RX_START_PG 0x00 /* First page of RX buffer */ @@ -116,9 +125,6 @@ static int useresources[] = { 1, /* dayna-lc */ }; -static char version[] __initdata = - "mac8390.c: v0.4 2001-05-15 David Huggins-Daines <dhd@debian.org> and others\n"; - extern enum mac8390_type mac8390_ident(struct nubus_dev * dev); extern int mac8390_memsize(unsigned long membase); extern int mac8390_memtest(struct net_device * dev); @@ -237,7 +243,7 @@ struct net_device * __init mac8390_probe(int unit) if (!MACH_IS_MAC) return ERR_PTR(-ENODEV); - dev = alloc_ei_netdev(); + dev = ____alloc_ei_netdev(0); if (!dev) return ERR_PTR(-ENOMEM); @@ -438,7 +444,7 @@ static int __init mac8390_initdev(struct net_device * dev, struct nubus_dev * nd dev->open = &mac8390_open; dev->stop = &mac8390_close; #ifdef CONFIG_NET_POLL_CONTROLLER - dev->poll_controller = ei_poll; + dev->poll_controller = __ei_poll; #endif /* GAR, ei_status is actually a macro even though it looks global */ @@ -510,7 +516,7 @@ static int __init mac8390_initdev(struct net_device * dev, struct nubus_dev * nd return -ENODEV; } - NS8390_init(dev, 0); + __NS8390_init(dev, 0); /* Good, done, now spit out some messages */ printk(KERN_INFO "%s: %s in slot %X (type %s)\n", @@ -532,8 +538,8 @@ static int __init mac8390_initdev(struct net_device * dev, struct nubus_dev * nd static int mac8390_open(struct net_device *dev) { - ei_open(dev); - if (request_irq(dev->irq, ei_interrupt, 0, "8390 Ethernet", dev)) { + __ei_open(dev); + if (request_irq(dev->irq, __ei_interrupt, 0, "8390 Ethernet", dev)) { printk ("%s: unable to get IRQ %d.\n", dev->name, dev->irq); return -EAGAIN; } @@ -543,7 +549,7 @@ static int mac8390_open(struct net_device *dev) static int mac8390_close(struct net_device *dev) { free_irq(dev->irq, dev); - ei_close(dev); + __ei_close(dev); return 0; } diff --git a/drivers/net/macb.c b/drivers/net/macb.c new file mode 100644 index 00000000000..bd0ce98c939 --- /dev/null +++ b/drivers/net/macb.c @@ -0,0 +1,1210 @@ +/* + * Atmel MACB Ethernet Controller driver + * + * Copyright (C) 2004-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/clk.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/slab.h> +#include <linux/init.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/mii.h> +#include <linux/mutex.h> +#include <linux/dma-mapping.h> +#include <linux/ethtool.h> +#include <linux/platform_device.h> + +#include <asm/arch/board.h> + +#include "macb.h" + +#define to_net_dev(class) container_of(class, struct net_device, class_dev) + +#define RX_BUFFER_SIZE 128 +#define RX_RING_SIZE 512 +#define RX_RING_BYTES (sizeof(struct dma_desc) * RX_RING_SIZE) + +/* Make the IP header word-aligned (the ethernet header is 14 bytes) */ +#define RX_OFFSET 2 + +#define TX_RING_SIZE 128 +#define DEF_TX_RING_PENDING (TX_RING_SIZE - 1) +#define TX_RING_BYTES (sizeof(struct dma_desc) * TX_RING_SIZE) + +#define TX_RING_GAP(bp) \ + (TX_RING_SIZE - (bp)->tx_pending) +#define TX_BUFFS_AVAIL(bp) \ + (((bp)->tx_tail <= (bp)->tx_head) ? \ + (bp)->tx_tail + (bp)->tx_pending - (bp)->tx_head : \ + (bp)->tx_tail - (bp)->tx_head - TX_RING_GAP(bp)) +#define NEXT_TX(n) (((n) + 1) & (TX_RING_SIZE - 1)) + +#define NEXT_RX(n) (((n) + 1) & (RX_RING_SIZE - 1)) + +/* minimum number of free TX descriptors before waking up TX process */ +#define MACB_TX_WAKEUP_THRESH (TX_RING_SIZE / 4) + +#define MACB_RX_INT_FLAGS (MACB_BIT(RCOMP) | MACB_BIT(RXUBR) \ + | MACB_BIT(ISR_ROVR)) + +static void __macb_set_hwaddr(struct macb *bp) +{ + u32 bottom; + u16 top; + + bottom = cpu_to_le32(*((u32 *)bp->dev->dev_addr)); + macb_writel(bp, SA1B, bottom); + top = cpu_to_le16(*((u16 *)(bp->dev->dev_addr + 4))); + macb_writel(bp, SA1T, top); +} + +static void __init macb_get_hwaddr(struct macb *bp) +{ + u32 bottom; + u16 top; + u8 addr[6]; + + bottom = macb_readl(bp, SA1B); + top = macb_readl(bp, SA1T); + + addr[0] = bottom & 0xff; + addr[1] = (bottom >> 8) & 0xff; + addr[2] = (bottom >> 16) & 0xff; + addr[3] = (bottom >> 24) & 0xff; + addr[4] = top & 0xff; + addr[5] = (top >> 8) & 0xff; + + if (is_valid_ether_addr(addr)) + memcpy(bp->dev->dev_addr, addr, sizeof(addr)); +} + +static void macb_enable_mdio(struct macb *bp) +{ + unsigned long flags; + u32 reg; + + spin_lock_irqsave(&bp->lock, flags); + reg = macb_readl(bp, NCR); + reg |= MACB_BIT(MPE); + macb_writel(bp, NCR, reg); + macb_writel(bp, IER, MACB_BIT(MFD)); + spin_unlock_irqrestore(&bp->lock, flags); +} + +static void macb_disable_mdio(struct macb *bp) +{ + unsigned long flags; + u32 reg; + + spin_lock_irqsave(&bp->lock, flags); + reg = macb_readl(bp, NCR); + reg &= ~MACB_BIT(MPE); + macb_writel(bp, NCR, reg); + macb_writel(bp, IDR, MACB_BIT(MFD)); + spin_unlock_irqrestore(&bp->lock, flags); +} + +static int macb_mdio_read(struct net_device *dev, int phy_id, int location) +{ + struct macb *bp = netdev_priv(dev); + int value; + + mutex_lock(&bp->mdio_mutex); + + macb_enable_mdio(bp); + macb_writel(bp, MAN, (MACB_BF(SOF, MACB_MAN_SOF) + | MACB_BF(RW, MACB_MAN_READ) + | MACB_BF(PHYA, phy_id) + | MACB_BF(REGA, location) + | MACB_BF(CODE, MACB_MAN_CODE))); + + wait_for_completion(&bp->mdio_complete); + + value = MACB_BFEXT(DATA, macb_readl(bp, MAN)); + macb_disable_mdio(bp); + mutex_unlock(&bp->mdio_mutex); + + return value; +} + +static void macb_mdio_write(struct net_device *dev, int phy_id, + int location, int val) +{ + struct macb *bp = netdev_priv(dev); + + dev_dbg(&bp->pdev->dev, "mdio_write %02x:%02x <- %04x\n", + phy_id, location, val); + + mutex_lock(&bp->mdio_mutex); + macb_enable_mdio(bp); + + macb_writel(bp, MAN, (MACB_BF(SOF, MACB_MAN_SOF) + | MACB_BF(RW, MACB_MAN_WRITE) + | MACB_BF(PHYA, phy_id) + | MACB_BF(REGA, location) + | MACB_BF(CODE, MACB_MAN_CODE) + | MACB_BF(DATA, val))); + + wait_for_completion(&bp->mdio_complete); + + macb_disable_mdio(bp); + mutex_unlock(&bp->mdio_mutex); +} + +static int macb_phy_probe(struct macb *bp) +{ + int phy_address; + u16 phyid1, phyid2; + + for (phy_address = 0; phy_address < 32; phy_address++) { + phyid1 = macb_mdio_read(bp->dev, phy_address, MII_PHYSID1); + phyid2 = macb_mdio_read(bp->dev, phy_address, MII_PHYSID2); + + if (phyid1 != 0xffff && phyid1 != 0x0000 + && phyid2 != 0xffff && phyid2 != 0x0000) + break; + } + + if (phy_address == 32) + return -ENODEV; + + dev_info(&bp->pdev->dev, + "detected PHY at address %d (ID %04x:%04x)\n", + phy_address, phyid1, phyid2); + + bp->mii.phy_id = phy_address; + return 0; +} + +static void macb_set_media(struct macb *bp, int media) +{ + u32 reg; + + spin_lock_irq(&bp->lock); + reg = macb_readl(bp, NCFGR); + reg &= ~(MACB_BIT(SPD) | MACB_BIT(FD)); + if (media & (ADVERTISE_100HALF | ADVERTISE_100FULL)) + reg |= MACB_BIT(SPD); + if (media & ADVERTISE_FULL) + reg |= MACB_BIT(FD); + macb_writel(bp, NCFGR, reg); + spin_unlock_irq(&bp->lock); +} + +static void macb_check_media(struct macb *bp, int ok_to_print, int init_media) +{ + struct mii_if_info *mii = &bp->mii; + unsigned int old_carrier, new_carrier; + int advertise, lpa, media, duplex; + + /* if forced media, go no further */ + if (mii->force_media) + return; + + /* check current and old link status */ + old_carrier = netif_carrier_ok(mii->dev) ? 1 : 0; + new_carrier = (unsigned int) mii_link_ok(mii); + + /* if carrier state did not change, assume nothing else did */ + if (!init_media && old_carrier == new_carrier) + return; + + /* no carrier, nothing much to do */ + if (!new_carrier) { + netif_carrier_off(mii->dev); + printk(KERN_INFO "%s: link down\n", mii->dev->name); + return; + } + + /* + * we have carrier, see who's on the other end + */ + netif_carrier_on(mii->dev); + + /* get MII advertise and LPA values */ + if (!init_media && mii->advertising) { + advertise = mii->advertising; + } else { + advertise = mii->mdio_read(mii->dev, mii->phy_id, MII_ADVERTISE); + mii->advertising = advertise; + } + lpa = mii->mdio_read(mii->dev, mii->phy_id, MII_LPA); + + /* figure out media and duplex from advertise and LPA values */ + media = mii_nway_result(lpa & advertise); + duplex = (media & ADVERTISE_FULL) ? 1 : 0; + + if (ok_to_print) + printk(KERN_INFO "%s: link up, %sMbps, %s-duplex, lpa 0x%04X\n", + mii->dev->name, + media & (ADVERTISE_100FULL | ADVERTISE_100HALF) ? "100" : "10", + duplex ? "full" : "half", lpa); + + mii->full_duplex = duplex; + + /* Let the MAC know about the new link state */ + macb_set_media(bp, media); +} + +static void macb_update_stats(struct macb *bp) +{ + u32 __iomem *reg = bp->regs + MACB_PFR; + u32 *p = &bp->hw_stats.rx_pause_frames; + u32 *end = &bp->hw_stats.tx_pause_frames + 1; + + WARN_ON((unsigned long)(end - p - 1) != (MACB_TPF - MACB_PFR) / 4); + + for(; p < end; p++, reg++) + *p += readl(reg); +} + +static void macb_periodic_task(void *arg) +{ + struct macb *bp = arg; + + macb_update_stats(bp); + macb_check_media(bp, 1, 0); + + schedule_delayed_work(&bp->periodic_task, HZ); +} + +static void macb_tx(struct macb *bp) +{ + unsigned int tail; + unsigned int head; + u32 status; + + status = macb_readl(bp, TSR); + macb_writel(bp, TSR, status); + + dev_dbg(&bp->pdev->dev, "macb_tx status = %02lx\n", + (unsigned long)status); + + if (status & MACB_BIT(UND)) { + printk(KERN_ERR "%s: TX underrun, resetting buffers\n", + bp->dev->name); + bp->tx_head = bp->tx_tail = 0; + } + + if (!(status & MACB_BIT(COMP))) + /* + * This may happen when a buffer becomes complete + * between reading the ISR and scanning the + * descriptors. Nothing to worry about. + */ + return; + + head = bp->tx_head; + for (tail = bp->tx_tail; tail != head; tail = NEXT_TX(tail)) { + struct ring_info *rp = &bp->tx_skb[tail]; + struct sk_buff *skb = rp->skb; + u32 bufstat; + + BUG_ON(skb == NULL); + + rmb(); + bufstat = bp->tx_ring[tail].ctrl; + + if (!(bufstat & MACB_BIT(TX_USED))) + break; + + dev_dbg(&bp->pdev->dev, "skb %u (data %p) TX complete\n", + tail, skb->data); + dma_unmap_single(&bp->pdev->dev, rp->mapping, skb->len, + DMA_TO_DEVICE); + bp->stats.tx_packets++; + bp->stats.tx_bytes += skb->len; + rp->skb = NULL; + dev_kfree_skb_irq(skb); + } + + bp->tx_tail = tail; + if (netif_queue_stopped(bp->dev) && + TX_BUFFS_AVAIL(bp) > MACB_TX_WAKEUP_THRESH) + netif_wake_queue(bp->dev); +} + +static int macb_rx_frame(struct macb *bp, unsigned int first_frag, + unsigned int last_frag) +{ + unsigned int len; + unsigned int frag; + unsigned int offset = 0; + struct sk_buff *skb; + + len = MACB_BFEXT(RX_FRMLEN, bp->rx_ring[last_frag].ctrl); + + dev_dbg(&bp->pdev->dev, "macb_rx_frame frags %u - %u (len %u)\n", + first_frag, last_frag, len); + + skb = dev_alloc_skb(len + RX_OFFSET); + if (!skb) { + bp->stats.rx_dropped++; + for (frag = first_frag; ; frag = NEXT_RX(frag)) { + bp->rx_ring[frag].addr &= ~MACB_BIT(RX_USED); + if (frag == last_frag) + break; + } + wmb(); + return 1; + } + + skb_reserve(skb, RX_OFFSET); + skb->dev = bp->dev; + skb->ip_summed = CHECKSUM_NONE; + skb_put(skb, len); + + for (frag = first_frag; ; frag = NEXT_RX(frag)) { + unsigned int frag_len = RX_BUFFER_SIZE; + + if (offset + frag_len > len) { + BUG_ON(frag != last_frag); + frag_len = len - offset; + } + memcpy(skb->data + offset, + bp->rx_buffers + (RX_BUFFER_SIZE * frag), + frag_len); + offset += RX_BUFFER_SIZE; + bp->rx_ring[frag].addr &= ~MACB_BIT(RX_USED); + wmb(); + + if (frag == last_frag) + break; + } + + skb->protocol = eth_type_trans(skb, bp->dev); + + bp->stats.rx_packets++; + bp->stats.rx_bytes += len; + bp->dev->last_rx = jiffies; + dev_dbg(&bp->pdev->dev, "received skb of length %u, csum: %08x\n", + skb->len, skb->csum); + netif_receive_skb(skb); + + return 0; +} + +/* Mark DMA descriptors from begin up to and not including end as unused */ +static void discard_partial_frame(struct macb *bp, unsigned int begin, + unsigned int end) +{ + unsigned int frag; + + for (frag = begin; frag != end; frag = NEXT_RX(frag)) + bp->rx_ring[frag].addr &= ~MACB_BIT(RX_USED); + wmb(); + + /* + * When this happens, the hardware stats registers for + * whatever caused this is updated, so we don't have to record + * anything. + */ +} + +static int macb_rx(struct macb *bp, int budget) +{ + int received = 0; + unsigned int tail = bp->rx_tail; + int first_frag = -1; + + for (; budget > 0; tail = NEXT_RX(tail)) { + u32 addr, ctrl; + + rmb(); + addr = bp->rx_ring[tail].addr; + ctrl = bp->rx_ring[tail].ctrl; + + if (!(addr & MACB_BIT(RX_USED))) + break; + + if (ctrl & MACB_BIT(RX_SOF)) { + if (first_frag != -1) + discard_partial_frame(bp, first_frag, tail); + first_frag = tail; + } + + if (ctrl & MACB_BIT(RX_EOF)) { + int dropped; + BUG_ON(first_frag == -1); + + dropped = macb_rx_frame(bp, first_frag, tail); + first_frag = -1; + if (!dropped) { + received++; + budget--; + } + } + } + + if (first_frag != -1) + bp->rx_tail = first_frag; + else + bp->rx_tail = tail; + + return received; +} + +static int macb_poll(struct net_device *dev, int *budget) +{ + struct macb *bp = netdev_priv(dev); + int orig_budget, work_done, retval = 0; + u32 status; + + status = macb_readl(bp, RSR); + macb_writel(bp, RSR, status); + + if (!status) { + /* + * This may happen if an interrupt was pending before + * this function was called last time, and no packets + * have been received since. + */ + netif_rx_complete(dev); + goto out; + } + + dev_dbg(&bp->pdev->dev, "poll: status = %08lx, budget = %d\n", + (unsigned long)status, *budget); + + if (!(status & MACB_BIT(REC))) { + dev_warn(&bp->pdev->dev, + "No RX buffers complete, status = %02lx\n", + (unsigned long)status); + netif_rx_complete(dev); + goto out; + } + + orig_budget = *budget; + if (orig_budget > dev->quota) + orig_budget = dev->quota; + + work_done = macb_rx(bp, orig_budget); + if (work_done < orig_budget) { + netif_rx_complete(dev); + retval = 0; + } else { + retval = 1; + } + + /* + * We've done what we can to clean the buffers. Make sure we + * get notified when new packets arrive. + */ +out: + macb_writel(bp, IER, MACB_RX_INT_FLAGS); + + /* TODO: Handle errors */ + + return retval; +} + +static irqreturn_t macb_interrupt(int irq, void *dev_id) +{ + struct net_device *dev = dev_id; + struct macb *bp = netdev_priv(dev); + u32 status; + + status = macb_readl(bp, ISR); + + if (unlikely(!status)) + return IRQ_NONE; + + spin_lock(&bp->lock); + + while (status) { + if (status & MACB_BIT(MFD)) + complete(&bp->mdio_complete); + + /* close possible race with dev_close */ + if (unlikely(!netif_running(dev))) { + macb_writel(bp, IDR, ~0UL); + break; + } + + if (status & MACB_RX_INT_FLAGS) { + if (netif_rx_schedule_prep(dev)) { + /* + * There's no point taking any more interrupts + * until we have processed the buffers + */ + macb_writel(bp, IDR, MACB_RX_INT_FLAGS); + dev_dbg(&bp->pdev->dev, "scheduling RX softirq\n"); + __netif_rx_schedule(dev); + } + } + + if (status & (MACB_BIT(TCOMP) | MACB_BIT(ISR_TUND))) + macb_tx(bp); + + /* + * Link change detection isn't possible with RMII, so we'll + * add that if/when we get our hands on a full-blown MII PHY. + */ + + if (status & MACB_BIT(HRESP)) { + /* + * TODO: Reset the hardware, and maybe move the printk + * to a lower-priority context as well (work queue?) + */ + printk(KERN_ERR "%s: DMA bus error: HRESP not OK\n", + dev->name); + } + + status = macb_readl(bp, ISR); + } + + spin_unlock(&bp->lock); + + return IRQ_HANDLED; +} + +static int macb_start_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct macb *bp = netdev_priv(dev); + dma_addr_t mapping; + unsigned int len, entry; + u32 ctrl; + +#ifdef DEBUG + int i; + dev_dbg(&bp->pdev->dev, + "start_xmit: len %u head %p data %p tail %p end %p\n", + skb->len, skb->head, skb->data, skb->tail, skb->end); + dev_dbg(&bp->pdev->dev, + "data:"); + for (i = 0; i < 16; i++) + printk(" %02x", (unsigned int)skb->data[i]); + printk("\n"); +#endif + + len = skb->len; + spin_lock_irq(&bp->lock); + + /* This is a hard error, log it. */ + if (TX_BUFFS_AVAIL(bp) < 1) { + netif_stop_queue(dev); + spin_unlock_irq(&bp->lock); + dev_err(&bp->pdev->dev, + "BUG! Tx Ring full when queue awake!\n"); + dev_dbg(&bp->pdev->dev, "tx_head = %u, tx_tail = %u\n", + bp->tx_head, bp->tx_tail); + return 1; + } + + entry = bp->tx_head; + dev_dbg(&bp->pdev->dev, "Allocated ring entry %u\n", entry); + mapping = dma_map_single(&bp->pdev->dev, skb->data, + len, DMA_TO_DEVICE); + bp->tx_skb[entry].skb = skb; + bp->tx_skb[entry].mapping = mapping; + dev_dbg(&bp->pdev->dev, "Mapped skb data %p to DMA addr %08lx\n", + skb->data, (unsigned long)mapping); + + ctrl = MACB_BF(TX_FRMLEN, len); + ctrl |= MACB_BIT(TX_LAST); + if (entry == (TX_RING_SIZE - 1)) + ctrl |= MACB_BIT(TX_WRAP); + + bp->tx_ring[entry].addr = mapping; + bp->tx_ring[entry].ctrl = ctrl; + wmb(); + + entry = NEXT_TX(entry); + bp->tx_head = entry; + + macb_writel(bp, NCR, macb_readl(bp, NCR) | MACB_BIT(TSTART)); + + if (TX_BUFFS_AVAIL(bp) < 1) + netif_stop_queue(dev); + + spin_unlock_irq(&bp->lock); + + dev->trans_start = jiffies; + + return 0; +} + +static void macb_free_consistent(struct macb *bp) +{ + if (bp->tx_skb) { + kfree(bp->tx_skb); + bp->tx_skb = NULL; + } + if (bp->rx_ring) { + dma_free_coherent(&bp->pdev->dev, RX_RING_BYTES, + bp->rx_ring, bp->rx_ring_dma); + bp->rx_ring = NULL; + } + if (bp->tx_ring) { + dma_free_coherent(&bp->pdev->dev, TX_RING_BYTES, + bp->tx_ring, bp->tx_ring_dma); + bp->tx_ring = NULL; + } + if (bp->rx_buffers) { + dma_free_coherent(&bp->pdev->dev, + RX_RING_SIZE * RX_BUFFER_SIZE, + bp->rx_buffers, bp->rx_buffers_dma); + bp->rx_buffers = NULL; + } +} + +static int macb_alloc_consistent(struct macb *bp) +{ + int size; + + size = TX_RING_SIZE * sizeof(struct ring_info); + bp->tx_skb = kmalloc(size, GFP_KERNEL); + if (!bp->tx_skb) + goto out_err; + + size = RX_RING_BYTES; + bp->rx_ring = dma_alloc_coherent(&bp->pdev->dev, size, + &bp->rx_ring_dma, GFP_KERNEL); + if (!bp->rx_ring) + goto out_err; + dev_dbg(&bp->pdev->dev, + "Allocated RX ring of %d bytes at %08lx (mapped %p)\n", + size, (unsigned long)bp->rx_ring_dma, bp->rx_ring); + + size = TX_RING_BYTES; + bp->tx_ring = dma_alloc_coherent(&bp->pdev->dev, size, + &bp->tx_ring_dma, GFP_KERNEL); + if (!bp->tx_ring) + goto out_err; + dev_dbg(&bp->pdev->dev, + "Allocated TX ring of %d bytes at %08lx (mapped %p)\n", + size, (unsigned long)bp->tx_ring_dma, bp->tx_ring); + + size = RX_RING_SIZE * RX_BUFFER_SIZE; + bp->rx_buffers = dma_alloc_coherent(&bp->pdev->dev, size, + &bp->rx_buffers_dma, GFP_KERNEL); + if (!bp->rx_buffers) + goto out_err; + dev_dbg(&bp->pdev->dev, + "Allocated RX buffers of %d bytes at %08lx (mapped %p)\n", + size, (unsigned long)bp->rx_buffers_dma, bp->rx_buffers); + + return 0; + +out_err: + macb_free_consistent(bp); + return -ENOMEM; +} + +static void macb_init_rings(struct macb *bp) +{ + int i; + dma_addr_t addr; + + addr = bp->rx_buffers_dma; + for (i = 0; i < RX_RING_SIZE; i++) { + bp->rx_ring[i].addr = addr; + bp->rx_ring[i].ctrl = 0; + addr += RX_BUFFER_SIZE; + } + bp->rx_ring[RX_RING_SIZE - 1].addr |= MACB_BIT(RX_WRAP); + + for (i = 0; i < TX_RING_SIZE; i++) { + bp->tx_ring[i].addr = 0; + bp->tx_ring[i].ctrl = MACB_BIT(TX_USED); + } + bp->tx_ring[TX_RING_SIZE - 1].ctrl |= MACB_BIT(TX_WRAP); + + bp->rx_tail = bp->tx_head = bp->tx_tail = 0; +} + +static void macb_reset_hw(struct macb *bp) +{ + /* Make sure we have the write buffer for ourselves */ + wmb(); + + /* + * Disable RX and TX (XXX: Should we halt the transmission + * more gracefully?) + */ + macb_writel(bp, NCR, 0); + + /* Clear the stats registers (XXX: Update stats first?) */ + macb_writel(bp, NCR, MACB_BIT(CLRSTAT)); + + /* Clear all status flags */ + macb_writel(bp, TSR, ~0UL); + macb_writel(bp, RSR, ~0UL); + + /* Disable all interrupts */ + macb_writel(bp, IDR, ~0UL); + macb_readl(bp, ISR); +} + +static void macb_init_hw(struct macb *bp) +{ + u32 config; + + macb_reset_hw(bp); + __macb_set_hwaddr(bp); + + config = macb_readl(bp, NCFGR) & MACB_BF(CLK, -1L); + config |= MACB_BIT(PAE); /* PAuse Enable */ + config |= MACB_BIT(DRFCS); /* Discard Rx FCS */ + if (bp->dev->flags & IFF_PROMISC) + config |= MACB_BIT(CAF); /* Copy All Frames */ + if (!(bp->dev->flags & IFF_BROADCAST)) + config |= MACB_BIT(NBC); /* No BroadCast */ + macb_writel(bp, NCFGR, config); + + /* Initialize TX and RX buffers */ + macb_writel(bp, RBQP, bp->rx_ring_dma); + macb_writel(bp, TBQP, bp->tx_ring_dma); + + /* Enable TX and RX */ + macb_writel(bp, NCR, MACB_BIT(RE) | MACB_BIT(TE)); + + /* Enable interrupts */ + macb_writel(bp, IER, (MACB_BIT(RCOMP) + | MACB_BIT(RXUBR) + | MACB_BIT(ISR_TUND) + | MACB_BIT(ISR_RLE) + | MACB_BIT(TXERR) + | MACB_BIT(TCOMP) + | MACB_BIT(ISR_ROVR) + | MACB_BIT(HRESP))); +} + +static void macb_init_phy(struct net_device *dev) +{ + struct macb *bp = netdev_priv(dev); + + /* Set some reasonable default settings */ + macb_mdio_write(dev, bp->mii.phy_id, MII_ADVERTISE, + ADVERTISE_CSMA | ADVERTISE_ALL); + macb_mdio_write(dev, bp->mii.phy_id, MII_BMCR, + (BMCR_SPEED100 | BMCR_ANENABLE + | BMCR_ANRESTART | BMCR_FULLDPLX)); +} + +static int macb_open(struct net_device *dev) +{ + struct macb *bp = netdev_priv(dev); + int err; + + dev_dbg(&bp->pdev->dev, "open\n"); + + if (!is_valid_ether_addr(dev->dev_addr)) + return -EADDRNOTAVAIL; + + err = macb_alloc_consistent(bp); + if (err) { + printk(KERN_ERR + "%s: Unable to allocate DMA memory (error %d)\n", + dev->name, err); + return err; + } + + macb_init_rings(bp); + macb_init_hw(bp); + macb_init_phy(dev); + + macb_check_media(bp, 1, 1); + netif_start_queue(dev); + + schedule_delayed_work(&bp->periodic_task, HZ); + + return 0; +} + +static int macb_close(struct net_device *dev) +{ + struct macb *bp = netdev_priv(dev); + unsigned long flags; + + cancel_rearming_delayed_work(&bp->periodic_task); + + netif_stop_queue(dev); + + spin_lock_irqsave(&bp->lock, flags); + macb_reset_hw(bp); + netif_carrier_off(dev); + spin_unlock_irqrestore(&bp->lock, flags); + + macb_free_consistent(bp); + + return 0; +} + +static struct net_device_stats *macb_get_stats(struct net_device *dev) +{ + struct macb *bp = netdev_priv(dev); + struct net_device_stats *nstat = &bp->stats; + struct macb_stats *hwstat = &bp->hw_stats; + + /* Convert HW stats into netdevice stats */ + nstat->rx_errors = (hwstat->rx_fcs_errors + + hwstat->rx_align_errors + + hwstat->rx_resource_errors + + hwstat->rx_overruns + + hwstat->rx_oversize_pkts + + hwstat->rx_jabbers + + hwstat->rx_undersize_pkts + + hwstat->sqe_test_errors + + hwstat->rx_length_mismatch); + nstat->tx_errors = (hwstat->tx_late_cols + + hwstat->tx_excessive_cols + + hwstat->tx_underruns + + hwstat->tx_carrier_errors); + nstat->collisions = (hwstat->tx_single_cols + + hwstat->tx_multiple_cols + + hwstat->tx_excessive_cols); + nstat->rx_length_errors = (hwstat->rx_oversize_pkts + + hwstat->rx_jabbers + + hwstat->rx_undersize_pkts + + hwstat->rx_length_mismatch); + nstat->rx_over_errors = hwstat->rx_resource_errors; + nstat->rx_crc_errors = hwstat->rx_fcs_errors; + nstat->rx_frame_errors = hwstat->rx_align_errors; + nstat->rx_fifo_errors = hwstat->rx_overruns; + /* XXX: What does "missed" mean? */ + nstat->tx_aborted_errors = hwstat->tx_excessive_cols; + nstat->tx_carrier_errors = hwstat->tx_carrier_errors; + nstat->tx_fifo_errors = hwstat->tx_underruns; + /* Don't know about heartbeat or window errors... */ + + return nstat; +} + +static int macb_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct macb *bp = netdev_priv(dev); + int ret; + unsigned long flags; + + spin_lock_irqsave(&bp->lock, flags); + ret = mii_ethtool_gset(&bp->mii, cmd); + spin_unlock_irqrestore(&bp->lock, flags); + + return ret; +} + +static int macb_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct macb *bp = netdev_priv(dev); + int ret; + unsigned long flags; + + spin_lock_irqsave(&bp->lock, flags); + ret = mii_ethtool_sset(&bp->mii, cmd); + spin_unlock_irqrestore(&bp->lock, flags); + + return ret; +} + +static void macb_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) +{ + struct macb *bp = netdev_priv(dev); + + strcpy(info->driver, bp->pdev->dev.driver->name); + strcpy(info->version, "$Revision: 1.14 $"); + strcpy(info->bus_info, bp->pdev->dev.bus_id); +} + +static int macb_nway_reset(struct net_device *dev) +{ + struct macb *bp = netdev_priv(dev); + return mii_nway_restart(&bp->mii); +} + +static struct ethtool_ops macb_ethtool_ops = { + .get_settings = macb_get_settings, + .set_settings = macb_set_settings, + .get_drvinfo = macb_get_drvinfo, + .nway_reset = macb_nway_reset, + .get_link = ethtool_op_get_link, +}; + +static int macb_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) +{ + struct macb *bp = netdev_priv(dev); + int ret; + unsigned long flags; + + if (!netif_running(dev)) + return -EINVAL; + + spin_lock_irqsave(&bp->lock, flags); + ret = generic_mii_ioctl(&bp->mii, if_mii(rq), cmd, NULL); + spin_unlock_irqrestore(&bp->lock, flags); + + return ret; +} + +static ssize_t macb_mii_show(const struct class_device *cd, char *buf, + unsigned long addr) +{ + struct net_device *dev = to_net_dev(cd); + struct macb *bp = netdev_priv(dev); + ssize_t ret = -EINVAL; + + if (netif_running(dev)) { + int value; + value = macb_mdio_read(dev, bp->mii.phy_id, addr); + ret = sprintf(buf, "0x%04x\n", (uint16_t)value); + } + + return ret; +} + +#define MII_ENTRY(name, addr) \ +static ssize_t show_##name(struct class_device *cd, char *buf) \ +{ \ + return macb_mii_show(cd, buf, addr); \ +} \ +static CLASS_DEVICE_ATTR(name, S_IRUGO, show_##name, NULL) + +MII_ENTRY(bmcr, MII_BMCR); +MII_ENTRY(bmsr, MII_BMSR); +MII_ENTRY(physid1, MII_PHYSID1); +MII_ENTRY(physid2, MII_PHYSID2); +MII_ENTRY(advertise, MII_ADVERTISE); +MII_ENTRY(lpa, MII_LPA); +MII_ENTRY(expansion, MII_EXPANSION); + +static struct attribute *macb_mii_attrs[] = { + &class_device_attr_bmcr.attr, + &class_device_attr_bmsr.attr, + &class_device_attr_physid1.attr, + &class_device_attr_physid2.attr, + &class_device_attr_advertise.attr, + &class_device_attr_lpa.attr, + &class_device_attr_expansion.attr, + NULL, +}; + +static struct attribute_group macb_mii_group = { + .name = "mii", + .attrs = macb_mii_attrs, +}; + +static void macb_unregister_sysfs(struct net_device *net) +{ + struct class_device *class_dev = &net->class_dev; + + sysfs_remove_group(&class_dev->kobj, &macb_mii_group); +} + +static int macb_register_sysfs(struct net_device *net) +{ + struct class_device *class_dev = &net->class_dev; + int ret; + + ret = sysfs_create_group(&class_dev->kobj, &macb_mii_group); + if (ret) + printk(KERN_WARNING + "%s: sysfs mii attribute registration failed: %d\n", + net->name, ret); + return ret; +} +static int __devinit macb_probe(struct platform_device *pdev) +{ + struct eth_platform_data *pdata; + struct resource *regs; + struct net_device *dev; + struct macb *bp; + unsigned long pclk_hz; + u32 config; + int err = -ENXIO; + + regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!regs) { + dev_err(&pdev->dev, "no mmio resource defined\n"); + goto err_out; + } + + err = -ENOMEM; + dev = alloc_etherdev(sizeof(*bp)); + if (!dev) { + dev_err(&pdev->dev, "etherdev alloc failed, aborting.\n"); + goto err_out; + } + + SET_MODULE_OWNER(dev); + SET_NETDEV_DEV(dev, &pdev->dev); + + /* TODO: Actually, we have some interesting features... */ + dev->features |= 0; + + bp = netdev_priv(dev); + bp->pdev = pdev; + bp->dev = dev; + + spin_lock_init(&bp->lock); + + bp->pclk = clk_get(&pdev->dev, "pclk"); + if (IS_ERR(bp->pclk)) { + dev_err(&pdev->dev, "failed to get pclk\n"); + goto err_out_free_dev; + } + bp->hclk = clk_get(&pdev->dev, "hclk"); + if (IS_ERR(bp->hclk)) { + dev_err(&pdev->dev, "failed to get hclk\n"); + goto err_out_put_pclk; + } + + clk_enable(bp->pclk); + clk_enable(bp->hclk); + + bp->regs = ioremap(regs->start, regs->end - regs->start + 1); + if (!bp->regs) { + dev_err(&pdev->dev, "failed to map registers, aborting.\n"); + err = -ENOMEM; + goto err_out_disable_clocks; + } + + dev->irq = platform_get_irq(pdev, 0); + err = request_irq(dev->irq, macb_interrupt, SA_SAMPLE_RANDOM, + dev->name, dev); + if (err) { + printk(KERN_ERR + "%s: Unable to request IRQ %d (error %d)\n", + dev->name, dev->irq, err); + goto err_out_iounmap; + } + + dev->open = macb_open; + dev->stop = macb_close; + dev->hard_start_xmit = macb_start_xmit; + dev->get_stats = macb_get_stats; + dev->do_ioctl = macb_ioctl; + dev->poll = macb_poll; + dev->weight = 64; + dev->ethtool_ops = &macb_ethtool_ops; + + dev->base_addr = regs->start; + + INIT_WORK(&bp->periodic_task, macb_periodic_task, bp); + mutex_init(&bp->mdio_mutex); + init_completion(&bp->mdio_complete); + + /* Set MII management clock divider */ + pclk_hz = clk_get_rate(bp->pclk); + if (pclk_hz <= 20000000) + config = MACB_BF(CLK, MACB_CLK_DIV8); + else if (pclk_hz <= 40000000) + config = MACB_BF(CLK, MACB_CLK_DIV16); + else if (pclk_hz <= 80000000) + config = MACB_BF(CLK, MACB_CLK_DIV32); + else + config = MACB_BF(CLK, MACB_CLK_DIV64); + macb_writel(bp, NCFGR, config); + + bp->mii.dev = dev; + bp->mii.mdio_read = macb_mdio_read; + bp->mii.mdio_write = macb_mdio_write; + bp->mii.phy_id_mask = 0x1f; + bp->mii.reg_num_mask = 0x1f; + + macb_get_hwaddr(bp); + err = macb_phy_probe(bp); + if (err) { + dev_err(&pdev->dev, "Failed to detect PHY, aborting.\n"); + goto err_out_free_irq; + } + + pdata = pdev->dev.platform_data; + if (pdata && pdata->is_rmii) + macb_writel(bp, USRIO, 0); + else + macb_writel(bp, USRIO, MACB_BIT(MII)); + + bp->tx_pending = DEF_TX_RING_PENDING; + + err = register_netdev(dev); + if (err) { + dev_err(&pdev->dev, "Cannot register net device, aborting.\n"); + goto err_out_free_irq; + } + + platform_set_drvdata(pdev, dev); + + macb_register_sysfs(dev); + + printk(KERN_INFO "%s: Atmel MACB at 0x%08lx irq %d " + "(%02x:%02x:%02x:%02x:%02x:%02x)\n", + dev->name, dev->base_addr, dev->irq, + dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2], + dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5]); + + return 0; + +err_out_free_irq: + free_irq(dev->irq, dev); +err_out_iounmap: + iounmap(bp->regs); +err_out_disable_clocks: + clk_disable(bp->hclk); + clk_disable(bp->pclk); + clk_put(bp->hclk); +err_out_put_pclk: + clk_put(bp->pclk); +err_out_free_dev: + free_netdev(dev); +err_out: + platform_set_drvdata(pdev, NULL); + return err; +} + +static int __devexit macb_remove(struct platform_device *pdev) +{ + struct net_device *dev; + struct macb *bp; + + dev = platform_get_drvdata(pdev); + + if (dev) { + bp = netdev_priv(dev); + macb_unregister_sysfs(dev); + unregister_netdev(dev); + free_irq(dev->irq, dev); + iounmap(bp->regs); + clk_disable(bp->hclk); + clk_disable(bp->pclk); + clk_put(bp->hclk); + clk_put(bp->pclk); + free_netdev(dev); + platform_set_drvdata(pdev, NULL); + } + + return 0; +} + +static struct platform_driver macb_driver = { + .probe = macb_probe, + .remove = __devexit_p(macb_remove), + .driver = { + .name = "macb", + }, +}; + +static int __init macb_init(void) +{ + return platform_driver_register(&macb_driver); +} + +static void __exit macb_exit(void) +{ + platform_driver_unregister(&macb_driver); +} + +module_init(macb_init); +module_exit(macb_exit); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Atmel MACB Ethernet driver"); +MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>"); diff --git a/drivers/net/macb.h b/drivers/net/macb.h new file mode 100644 index 00000000000..8c253db6988 --- /dev/null +++ b/drivers/net/macb.h @@ -0,0 +1,387 @@ +/* + * Atmel MACB Ethernet Controller driver + * + * Copyright (C) 2004-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef _MACB_H +#define _MACB_H + +/* MACB register offsets */ +#define MACB_NCR 0x0000 +#define MACB_NCFGR 0x0004 +#define MACB_NSR 0x0008 +#define MACB_TSR 0x0014 +#define MACB_RBQP 0x0018 +#define MACB_TBQP 0x001c +#define MACB_RSR 0x0020 +#define MACB_ISR 0x0024 +#define MACB_IER 0x0028 +#define MACB_IDR 0x002c +#define MACB_IMR 0x0030 +#define MACB_MAN 0x0034 +#define MACB_PTR 0x0038 +#define MACB_PFR 0x003c +#define MACB_FTO 0x0040 +#define MACB_SCF 0x0044 +#define MACB_MCF 0x0048 +#define MACB_FRO 0x004c +#define MACB_FCSE 0x0050 +#define MACB_ALE 0x0054 +#define MACB_DTF 0x0058 +#define MACB_LCOL 0x005c +#define MACB_EXCOL 0x0060 +#define MACB_TUND 0x0064 +#define MACB_CSE 0x0068 +#define MACB_RRE 0x006c +#define MACB_ROVR 0x0070 +#define MACB_RSE 0x0074 +#define MACB_ELE 0x0078 +#define MACB_RJA 0x007c +#define MACB_USF 0x0080 +#define MACB_STE 0x0084 +#define MACB_RLE 0x0088 +#define MACB_TPF 0x008c +#define MACB_HRB 0x0090 +#define MACB_HRT 0x0094 +#define MACB_SA1B 0x0098 +#define MACB_SA1T 0x009c +#define MACB_SA2B 0x00a0 +#define MACB_SA2T 0x00a4 +#define MACB_SA3B 0x00a8 +#define MACB_SA3T 0x00ac +#define MACB_SA4B 0x00b0 +#define MACB_SA4T 0x00b4 +#define MACB_TID 0x00b8 +#define MACB_TPQ 0x00bc +#define MACB_USRIO 0x00c0 +#define MACB_WOL 0x00c4 + +/* Bitfields in NCR */ +#define MACB_LB_OFFSET 0 +#define MACB_LB_SIZE 1 +#define MACB_LLB_OFFSET 1 +#define MACB_LLB_SIZE 1 +#define MACB_RE_OFFSET 2 +#define MACB_RE_SIZE 1 +#define MACB_TE_OFFSET 3 +#define MACB_TE_SIZE 1 +#define MACB_MPE_OFFSET 4 +#define MACB_MPE_SIZE 1 +#define MACB_CLRSTAT_OFFSET 5 +#define MACB_CLRSTAT_SIZE 1 +#define MACB_INCSTAT_OFFSET 6 +#define MACB_INCSTAT_SIZE 1 +#define MACB_WESTAT_OFFSET 7 +#define MACB_WESTAT_SIZE 1 +#define MACB_BP_OFFSET 8 +#define MACB_BP_SIZE 1 +#define MACB_TSTART_OFFSET 9 +#define MACB_TSTART_SIZE 1 +#define MACB_THALT_OFFSET 10 +#define MACB_THALT_SIZE 1 +#define MACB_NCR_TPF_OFFSET 11 +#define MACB_NCR_TPF_SIZE 1 +#define MACB_TZQ_OFFSET 12 +#define MACB_TZQ_SIZE 1 + +/* Bitfields in NCFGR */ +#define MACB_SPD_OFFSET 0 +#define MACB_SPD_SIZE 1 +#define MACB_FD_OFFSET 1 +#define MACB_FD_SIZE 1 +#define MACB_BIT_RATE_OFFSET 2 +#define MACB_BIT_RATE_SIZE 1 +#define MACB_JFRAME_OFFSET 3 +#define MACB_JFRAME_SIZE 1 +#define MACB_CAF_OFFSET 4 +#define MACB_CAF_SIZE 1 +#define MACB_NBC_OFFSET 5 +#define MACB_NBC_SIZE 1 +#define MACB_NCFGR_MTI_OFFSET 6 +#define MACB_NCFGR_MTI_SIZE 1 +#define MACB_UNI_OFFSET 7 +#define MACB_UNI_SIZE 1 +#define MACB_BIG_OFFSET 8 +#define MACB_BIG_SIZE 1 +#define MACB_EAE_OFFSET 9 +#define MACB_EAE_SIZE 1 +#define MACB_CLK_OFFSET 10 +#define MACB_CLK_SIZE 2 +#define MACB_RTY_OFFSET 12 +#define MACB_RTY_SIZE 1 +#define MACB_PAE_OFFSET 13 +#define MACB_PAE_SIZE 1 +#define MACB_RBOF_OFFSET 14 +#define MACB_RBOF_SIZE 2 +#define MACB_RLCE_OFFSET 16 +#define MACB_RLCE_SIZE 1 +#define MACB_DRFCS_OFFSET 17 +#define MACB_DRFCS_SIZE 1 +#define MACB_EFRHD_OFFSET 18 +#define MACB_EFRHD_SIZE 1 +#define MACB_IRXFCS_OFFSET 19 +#define MACB_IRXFCS_SIZE 1 + +/* Bitfields in NSR */ +#define MACB_NSR_LINK_OFFSET 0 +#define MACB_NSR_LINK_SIZE 1 +#define MACB_MDIO_OFFSET 1 +#define MACB_MDIO_SIZE 1 +#define MACB_IDLE_OFFSET 2 +#define MACB_IDLE_SIZE 1 + +/* Bitfields in TSR */ +#define MACB_UBR_OFFSET 0 +#define MACB_UBR_SIZE 1 +#define MACB_COL_OFFSET 1 +#define MACB_COL_SIZE 1 +#define MACB_TSR_RLE_OFFSET 2 +#define MACB_TSR_RLE_SIZE 1 +#define MACB_TGO_OFFSET 3 +#define MACB_TGO_SIZE 1 +#define MACB_BEX_OFFSET 4 +#define MACB_BEX_SIZE 1 +#define MACB_COMP_OFFSET 5 +#define MACB_COMP_SIZE 1 +#define MACB_UND_OFFSET 6 +#define MACB_UND_SIZE 1 + +/* Bitfields in RSR */ +#define MACB_BNA_OFFSET 0 +#define MACB_BNA_SIZE 1 +#define MACB_REC_OFFSET 1 +#define MACB_REC_SIZE 1 +#define MACB_OVR_OFFSET 2 +#define MACB_OVR_SIZE 1 + +/* Bitfields in ISR/IER/IDR/IMR */ +#define MACB_MFD_OFFSET 0 +#define MACB_MFD_SIZE 1 +#define MACB_RCOMP_OFFSET 1 +#define MACB_RCOMP_SIZE 1 +#define MACB_RXUBR_OFFSET 2 +#define MACB_RXUBR_SIZE 1 +#define MACB_TXUBR_OFFSET 3 +#define MACB_TXUBR_SIZE 1 +#define MACB_ISR_TUND_OFFSET 4 +#define MACB_ISR_TUND_SIZE 1 +#define MACB_ISR_RLE_OFFSET 5 +#define MACB_ISR_RLE_SIZE 1 +#define MACB_TXERR_OFFSET 6 +#define MACB_TXERR_SIZE 1 +#define MACB_TCOMP_OFFSET 7 +#define MACB_TCOMP_SIZE 1 +#define MACB_ISR_LINK_OFFSET 9 +#define MACB_ISR_LINK_SIZE 1 +#define MACB_ISR_ROVR_OFFSET 10 +#define MACB_ISR_ROVR_SIZE 1 +#define MACB_HRESP_OFFSET 11 +#define MACB_HRESP_SIZE 1 +#define MACB_PFR_OFFSET 12 +#define MACB_PFR_SIZE 1 +#define MACB_PTZ_OFFSET 13 +#define MACB_PTZ_SIZE 1 + +/* Bitfields in MAN */ +#define MACB_DATA_OFFSET 0 +#define MACB_DATA_SIZE 16 +#define MACB_CODE_OFFSET 16 +#define MACB_CODE_SIZE 2 +#define MACB_REGA_OFFSET 18 +#define MACB_REGA_SIZE 5 +#define MACB_PHYA_OFFSET 23 +#define MACB_PHYA_SIZE 5 +#define MACB_RW_OFFSET 28 +#define MACB_RW_SIZE 2 +#define MACB_SOF_OFFSET 30 +#define MACB_SOF_SIZE 2 + +/* Bitfields in USRIO */ +#define MACB_MII_OFFSET 0 +#define MACB_MII_SIZE 1 +#define MACB_EAM_OFFSET 1 +#define MACB_EAM_SIZE 1 +#define MACB_TX_PAUSE_OFFSET 2 +#define MACB_TX_PAUSE_SIZE 1 +#define MACB_TX_PAUSE_ZERO_OFFSET 3 +#define MACB_TX_PAUSE_ZERO_SIZE 1 + +/* Bitfields in WOL */ +#define MACB_IP_OFFSET 0 +#define MACB_IP_SIZE 16 +#define MACB_MAG_OFFSET 16 +#define MACB_MAG_SIZE 1 +#define MACB_ARP_OFFSET 17 +#define MACB_ARP_SIZE 1 +#define MACB_SA1_OFFSET 18 +#define MACB_SA1_SIZE 1 +#define MACB_WOL_MTI_OFFSET 19 +#define MACB_WOL_MTI_SIZE 1 + +/* Constants for CLK */ +#define MACB_CLK_DIV8 0 +#define MACB_CLK_DIV16 1 +#define MACB_CLK_DIV32 2 +#define MACB_CLK_DIV64 3 + +/* Constants for MAN register */ +#define MACB_MAN_SOF 1 +#define MACB_MAN_WRITE 1 +#define MACB_MAN_READ 2 +#define MACB_MAN_CODE 2 + +/* Bit manipulation macros */ +#define MACB_BIT(name) \ + (1 << MACB_##name##_OFFSET) +#define MACB_BF(name,value) \ + (((value) & ((1 << MACB_##name##_SIZE) - 1)) \ + << MACB_##name##_OFFSET) +#define MACB_BFEXT(name,value)\ + (((value) >> MACB_##name##_OFFSET) \ + & ((1 << MACB_##name##_SIZE) - 1)) +#define MACB_BFINS(name,value,old) \ + (((old) & ~(((1 << MACB_##name##_SIZE) - 1) \ + << MACB_##name##_OFFSET)) \ + | MACB_BF(name,value)) + +/* Register access macros */ +#define macb_readl(port,reg) \ + readl((port)->regs + MACB_##reg) +#define macb_writel(port,reg,value) \ + writel((value), (port)->regs + MACB_##reg) + +struct dma_desc { + u32 addr; + u32 ctrl; +}; + +/* DMA descriptor bitfields */ +#define MACB_RX_USED_OFFSET 0 +#define MACB_RX_USED_SIZE 1 +#define MACB_RX_WRAP_OFFSET 1 +#define MACB_RX_WRAP_SIZE 1 +#define MACB_RX_WADDR_OFFSET 2 +#define MACB_RX_WADDR_SIZE 30 + +#define MACB_RX_FRMLEN_OFFSET 0 +#define MACB_RX_FRMLEN_SIZE 12 +#define MACB_RX_OFFSET_OFFSET 12 +#define MACB_RX_OFFSET_SIZE 2 +#define MACB_RX_SOF_OFFSET 14 +#define MACB_RX_SOF_SIZE 1 +#define MACB_RX_EOF_OFFSET 15 +#define MACB_RX_EOF_SIZE 1 +#define MACB_RX_CFI_OFFSET 16 +#define MACB_RX_CFI_SIZE 1 +#define MACB_RX_VLAN_PRI_OFFSET 17 +#define MACB_RX_VLAN_PRI_SIZE 3 +#define MACB_RX_PRI_TAG_OFFSET 20 +#define MACB_RX_PRI_TAG_SIZE 1 +#define MACB_RX_VLAN_TAG_OFFSET 21 +#define MACB_RX_VLAN_TAG_SIZE 1 +#define MACB_RX_TYPEID_MATCH_OFFSET 22 +#define MACB_RX_TYPEID_MATCH_SIZE 1 +#define MACB_RX_SA4_MATCH_OFFSET 23 +#define MACB_RX_SA4_MATCH_SIZE 1 +#define MACB_RX_SA3_MATCH_OFFSET 24 +#define MACB_RX_SA3_MATCH_SIZE 1 +#define MACB_RX_SA2_MATCH_OFFSET 25 +#define MACB_RX_SA2_MATCH_SIZE 1 +#define MACB_RX_SA1_MATCH_OFFSET 26 +#define MACB_RX_SA1_MATCH_SIZE 1 +#define MACB_RX_EXT_MATCH_OFFSET 28 +#define MACB_RX_EXT_MATCH_SIZE 1 +#define MACB_RX_UHASH_MATCH_OFFSET 29 +#define MACB_RX_UHASH_MATCH_SIZE 1 +#define MACB_RX_MHASH_MATCH_OFFSET 30 +#define MACB_RX_MHASH_MATCH_SIZE 1 +#define MACB_RX_BROADCAST_OFFSET 31 +#define MACB_RX_BROADCAST_SIZE 1 + +#define MACB_TX_FRMLEN_OFFSET 0 +#define MACB_TX_FRMLEN_SIZE 11 +#define MACB_TX_LAST_OFFSET 15 +#define MACB_TX_LAST_SIZE 1 +#define MACB_TX_NOCRC_OFFSET 16 +#define MACB_TX_NOCRC_SIZE 1 +#define MACB_TX_BUF_EXHAUSTED_OFFSET 27 +#define MACB_TX_BUF_EXHAUSTED_SIZE 1 +#define MACB_TX_UNDERRUN_OFFSET 28 +#define MACB_TX_UNDERRUN_SIZE 1 +#define MACB_TX_ERROR_OFFSET 29 +#define MACB_TX_ERROR_SIZE 1 +#define MACB_TX_WRAP_OFFSET 30 +#define MACB_TX_WRAP_SIZE 1 +#define MACB_TX_USED_OFFSET 31 +#define MACB_TX_USED_SIZE 1 + +struct ring_info { + struct sk_buff *skb; + dma_addr_t mapping; +}; + +/* + * Hardware-collected statistics. Used when updating the network + * device stats by a periodic timer. + */ +struct macb_stats { + u32 rx_pause_frames; + u32 tx_ok; + u32 tx_single_cols; + u32 tx_multiple_cols; + u32 rx_ok; + u32 rx_fcs_errors; + u32 rx_align_errors; + u32 tx_deferred; + u32 tx_late_cols; + u32 tx_excessive_cols; + u32 tx_underruns; + u32 tx_carrier_errors; + u32 rx_resource_errors; + u32 rx_overruns; + u32 rx_symbol_errors; + u32 rx_oversize_pkts; + u32 rx_jabbers; + u32 rx_undersize_pkts; + u32 sqe_test_errors; + u32 rx_length_mismatch; + u32 tx_pause_frames; +}; + +struct macb { + void __iomem *regs; + + unsigned int rx_tail; + struct dma_desc *rx_ring; + void *rx_buffers; + + unsigned int tx_head, tx_tail; + struct dma_desc *tx_ring; + struct ring_info *tx_skb; + + spinlock_t lock; + struct platform_device *pdev; + struct clk *pclk; + struct clk *hclk; + struct net_device *dev; + struct net_device_stats stats; + struct macb_stats hw_stats; + + dma_addr_t rx_ring_dma; + dma_addr_t tx_ring_dma; + dma_addr_t rx_buffers_dma; + + unsigned int rx_pending, tx_pending; + + struct work_struct periodic_task; + + struct mutex mdio_mutex; + struct completion mdio_complete; + struct mii_if_info mii; +}; + +#endif /* _MACB_H */ diff --git a/drivers/net/meth.c b/drivers/net/meth.c index c1aa60b9a98..e1d97cdf649 100644 --- a/drivers/net/meth.c +++ b/drivers/net/meth.c @@ -33,7 +33,6 @@ #include <asm/ip32/ip32_ints.h> #include <asm/io.h> -#include <asm/checksum.h> #include <asm/scatterlist.h> #include <linux/dma-mapping.h> diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c index 98703e086ee..38df4280238 100644 --- a/drivers/net/myri10ge/myri10ge.c +++ b/drivers/net/myri10ge/myri10ge.c @@ -1955,7 +1955,7 @@ again: flags = (MXGEFW_FLAGS_NO_TSO | MXGEFW_FLAGS_FIRST); if (likely(skb->ip_summed == CHECKSUM_PARTIAL)) { cksum_offset = (skb->h.raw - skb->data); - pseudo_hdr_offset = (skb->h.raw + skb->csum) - skb->data; + pseudo_hdr_offset = cksum_offset + skb->csum_offset; /* If the headers are excessively large, then we must * fall back to a software checksum */ if (unlikely(cksum_offset > 255 || pseudo_hdr_offset > 127)) { diff --git a/drivers/net/myri_sbus.c b/drivers/net/myri_sbus.c index 7747bfd99f9..ee26ef52289 100644 --- a/drivers/net/myri_sbus.c +++ b/drivers/net/myri_sbus.c @@ -39,7 +39,6 @@ static char version[] = #include <asm/auxio.h> #include <asm/pgtable.h> #include <asm/irq.h> -#include <asm/checksum.h> #include "myri_sbus.h" #include "myri_code.h" diff --git a/drivers/net/ne-h8300.c b/drivers/net/ne-h8300.c index eb893d7e883..38fd525f0f1 100644 --- a/drivers/net/ne-h8300.c +++ b/drivers/net/ne-h8300.c @@ -33,6 +33,8 @@ static const char version1[] = #include <asm/io.h> #include <asm/irq.h> +#define EI_SHIFT(x) (ei_local->reg_offset[x]) + #include "8390.h" #define DRV_NAME "ne-h8300" @@ -52,6 +54,11 @@ static const char version1[] = /* ---- No user-serviceable parts below ---- */ +static const char version[] = + "8390.c:v1.10cvs 9/23/94 Donald Becker (becker@cesdis.gsfc.nasa.gov)\n"; + +#include "lib8390.c" + #define NE_BASE (dev->base_addr) #define NE_CMD 0x00 #define NE_DATAPORT (ei_status.word16?0x20:0x10) /* NatSemi-defined port window offset. */ @@ -162,7 +169,7 @@ static void cleanup_card(struct net_device *dev) #ifndef MODULE struct net_device * __init ne_probe(int unit) { - struct net_device *dev = alloc_ei_netdev(); + struct net_device *dev = ____alloc_ei_netdev(0); int err; if (!dev) @@ -283,7 +290,7 @@ static int __init ne_probe1(struct net_device *dev, int ioaddr) /* Snarf the interrupt now. There's no point in waiting since we cannot share and the board will usually be enabled. */ - ret = request_irq(dev->irq, ei_interrupt, 0, name, dev); + ret = request_irq(dev->irq, __ei_interrupt, 0, name, dev); if (ret) { printk (" unable to get IRQ %d (errno=%d).\n", dev->irq, ret); goto err_out; @@ -318,9 +325,9 @@ static int __init ne_probe1(struct net_device *dev, int ioaddr) dev->open = &ne_open; dev->stop = &ne_close; #ifdef CONFIG_NET_POLL_CONTROLLER - dev->poll_controller = ei_poll; + dev->poll_controller = __ei_poll; #endif - NS8390_init(dev, 0); + __NS8390_init(dev, 0); ret = register_netdev(dev); if (ret) @@ -335,7 +342,7 @@ err_out: static int ne_open(struct net_device *dev) { - ei_open(dev); + __ei_open(dev); return 0; } @@ -343,7 +350,7 @@ static int ne_close(struct net_device *dev) { if (ei_debug > 1) printk(KERN_DEBUG "%s: Shutting down ethercard.\n", dev->name); - ei_close(dev); + __ei_close(dev); return 0; } @@ -584,7 +591,7 @@ retry: if (time_after(jiffies, dma_start + 2*HZ/100)) { /* 20ms */ printk(KERN_WARNING "%s: timeout waiting for Tx RDC.\n", dev->name); ne_reset_8390(dev); - NS8390_init(dev,1); + __NS8390_init(dev,1); break; } @@ -620,7 +627,7 @@ int init_module(void) int err; for (this_dev = 0; this_dev < MAX_NE_CARDS; this_dev++) { - struct net_device *dev = alloc_ei_netdev(); + struct net_device *dev = ____alloc_ei_netdev(0); if (!dev) break; if (io[this_dev]) { diff --git a/drivers/net/netconsole.c b/drivers/net/netconsole.c index bf58db29e2e..69233f6aa05 100644 --- a/drivers/net/netconsole.c +++ b/drivers/net/netconsole.c @@ -60,7 +60,6 @@ static struct netpoll np = { .local_port = 6665, .remote_port = 6666, .remote_mac = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff}, - .drop = netpoll_queue, }; static int configured = 0; @@ -102,6 +101,8 @@ __setup("netconsole=", option_setup); static int init_netconsole(void) { + int err; + if(strlen(config)) option_setup(config); @@ -110,8 +111,9 @@ static int init_netconsole(void) return 0; } - if(netpoll_setup(&np)) - return -EINVAL; + err = netpoll_setup(&np); + if (err) + return err; register_console(&netconsole); printk(KERN_INFO "netconsole: network logging started\n"); diff --git a/drivers/net/netxen/Makefile b/drivers/net/netxen/Makefile new file mode 100644 index 00000000000..a07cdc6f738 --- /dev/null +++ b/drivers/net/netxen/Makefile @@ -0,0 +1,35 @@ +# Copyright (C) 2003 - 2006 NetXen, Inc. +# All rights reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License +# as published by the Free Software Foundation; either version 2 +# of the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, +# MA 02111-1307, USA. +# +# The full GNU General Public License is included in this distribution +# in the file called LICENSE. +# +# Contact Information: +# info@netxen.com +# NetXen, +# 3965 Freedom Circle, Fourth floor, +# Santa Clara, CA 95054 +# +# Makefile for the NetXen NIC Driver +# + + +obj-$(CONFIG_NETXEN_NIC) := netxen_nic.o + +netxen_nic-y := netxen_nic_hw.o netxen_nic_main.o netxen_nic_init.o \ + netxen_nic_isr.o netxen_nic_ethtool.o netxen_nic_niu.o diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h new file mode 100644 index 00000000000..d925053fe59 --- /dev/null +++ b/drivers/net/netxen/netxen_nic.h @@ -0,0 +1,1028 @@ +/* + * Copyright (C) 2003 - 2006 NetXen, Inc. + * All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, + * MA 02111-1307, USA. + * + * The full GNU General Public License is included in this distribution + * in the file called LICENSE. + * + * Contact Information: + * info@netxen.com + * NetXen, + * 3965 Freedom Circle, Fourth floor, + * Santa Clara, CA 95054 + */ + +#ifndef _NETXEN_NIC_H_ +#define _NETXEN_NIC_H_ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/compiler.h> +#include <linux/slab.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/ioport.h> +#include <linux/pci.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/ip.h> +#include <linux/in.h> +#include <linux/tcp.h> +#include <linux/skbuff.h> +#include <linux/version.h> + +#include <linux/ethtool.h> +#include <linux/mii.h> +#include <linux/interrupt.h> +#include <linux/timer.h> + +#include <linux/mm.h> +#include <linux/mman.h> + +#include <asm/system.h> +#include <asm/io.h> +#include <asm/byteorder.h> +#include <asm/uaccess.h> +#include <asm/pgtable.h> + +#include "netxen_nic_hw.h" + +#define NETXEN_NIC_BUILD_NO "5" +#define _NETXEN_NIC_LINUX_MAJOR 2 +#define _NETXEN_NIC_LINUX_MINOR 3 +#define _NETXEN_NIC_LINUX_SUBVERSION 59 +#define NETXEN_NIC_LINUX_VERSIONID "2.3.59" "-" NETXEN_NIC_BUILD_NO +#define NETXEN_NIC_FW_VERSIONID "2.3.59" + +#define RCV_DESC_RINGSIZE \ + (sizeof(struct rcv_desc) * adapter->max_rx_desc_count) +#define STATUS_DESC_RINGSIZE \ + (sizeof(struct status_desc)* adapter->max_rx_desc_count) +#define TX_RINGSIZE \ + (sizeof(struct netxen_cmd_buffer) * adapter->max_tx_desc_count) +#define RCV_BUFFSIZE \ + (sizeof(struct netxen_rx_buffer) * rcv_desc->max_rx_desc_count) +#define find_diff_among(a,b,range) ((a)<(b)?((b)-(a)):((b)+(range)-(a))) + +#define NETXEN_NETDEV_STATUS 0x1 + +#define ADDR_IN_WINDOW1(off) \ + ((off > NETXEN_CRB_PCIX_HOST2) && (off < NETXEN_CRB_MAX)) ? 1 : 0 + +/* + * normalize a 64MB crb address to 32MB PCI window + * To use NETXEN_CRB_NORMALIZE, window _must_ be set to 1 + */ +#define NETXEN_CRB_NORMAL(reg) \ + (reg) - NETXEN_CRB_PCIX_HOST2 + NETXEN_CRB_PCIX_HOST + +#define NETXEN_CRB_NORMALIZE(adapter, reg) \ + pci_base_offset(adapter, NETXEN_CRB_NORMAL(reg)) + +#define FIRST_PAGE_GROUP_START 0 +#define FIRST_PAGE_GROUP_END 0x400000 + +#define SECOND_PAGE_GROUP_START 0x4000000 +#define SECOND_PAGE_GROUP_END 0x66BC000 + +#define THIRD_PAGE_GROUP_START 0x70E4000 +#define THIRD_PAGE_GROUP_END 0x8000000 + +#define FIRST_PAGE_GROUP_SIZE FIRST_PAGE_GROUP_END - FIRST_PAGE_GROUP_START +#define SECOND_PAGE_GROUP_SIZE SECOND_PAGE_GROUP_END - SECOND_PAGE_GROUP_START +#define THIRD_PAGE_GROUP_SIZE THIRD_PAGE_GROUP_END - THIRD_PAGE_GROUP_START + +#define MAX_RX_BUFFER_LENGTH 2000 +#define MAX_RX_JUMBO_BUFFER_LENGTH 9046 +#define RX_DMA_MAP_LEN (MAX_RX_BUFFER_LENGTH - NET_IP_ALIGN) +#define RX_JUMBO_DMA_MAP_LEN \ + (MAX_RX_JUMBO_BUFFER_LENGTH - NET_IP_ALIGN) +#define NETXEN_ROM_ROUNDUP 0x80000000ULL + +/* + * Maximum number of ring contexts + */ +#define MAX_RING_CTX 1 + +/* Opcodes to be used with the commands */ +enum { + TX_ETHER_PKT = 0x01, +/* The following opcodes are for IP checksum */ + TX_TCP_PKT, + TX_UDP_PKT, + TX_IP_PKT, + TX_TCP_LSO, + TX_IPSEC, + TX_IPSEC_CMD +}; + +/* The following opcodes are for internal consumption. */ +#define NETXEN_CONTROL_OP 0x10 +#define PEGNET_REQUEST 0x11 + +#define MAX_NUM_CARDS 4 + +#define MAX_BUFFERS_PER_CMD 32 + +/* + * Following are the states of the Phantom. Phantom will set them and + * Host will read to check if the fields are correct. + */ +#define PHAN_INITIALIZE_START 0xff00 +#define PHAN_INITIALIZE_FAILED 0xffff +#define PHAN_INITIALIZE_COMPLETE 0xff01 + +/* Host writes the following to notify that it has done the init-handshake */ +#define PHAN_INITIALIZE_ACK 0xf00f + +#define NUM_RCV_DESC_RINGS 2 /* No of Rcv Descriptor contexts */ + +/* descriptor types */ +#define RCV_DESC_NORMAL 0x01 +#define RCV_DESC_JUMBO 0x02 +#define RCV_DESC_NORMAL_CTXID 0 +#define RCV_DESC_JUMBO_CTXID 1 + +#define RCV_DESC_TYPE(ID) \ + ((ID == RCV_DESC_JUMBO_CTXID) ? RCV_DESC_JUMBO : RCV_DESC_NORMAL) + +#define MAX_CMD_DESCRIPTORS 1024 +#define MAX_RCV_DESCRIPTORS 32768 +#define MAX_JUMBO_RCV_DESCRIPTORS 1024 +#define MAX_RCVSTATUS_DESCRIPTORS MAX_RCV_DESCRIPTORS +#define MAX_JUMBO_RCV_DESC MAX_JUMBO_RCV_DESCRIPTORS +#define MAX_RCV_DESC MAX_RCV_DESCRIPTORS +#define MAX_RCVSTATUS_DESC MAX_RCV_DESCRIPTORS +#define NUM_RCV_DESC (MAX_RCV_DESC + MAX_JUMBO_RCV_DESCRIPTORS) +#define MAX_EPG_DESCRIPTORS (MAX_CMD_DESCRIPTORS * 8) + +#define MIN_TX_COUNT 4096 +#define MIN_RX_COUNT 4096 + +#define MAX_FRAME_SIZE 0x10000 /* 64K MAX size for LSO */ + +#define PHAN_PEG_RCV_INITIALIZED 0xff01 +#define PHAN_PEG_RCV_START_INITIALIZE 0xff00 + +#define get_next_index(index, length) \ + (((index) + 1) & ((length) - 1)) + +#define get_index_range(index,length,count) \ + (((index) + (count)) & ((length) - 1)) + +/* + * Following data structures describe the descriptors that will be used. + * Added fileds of tcpHdrSize and ipHdrSize, The driver needs to do it only when + * we are doing LSO (above the 1500 size packet) only. + */ + +/* + * The size of reference handle been changed to 16 bits to pass the MSS fields + * for the LSO packet + */ + +#define FLAGS_CHECKSUM_ENABLED 0x01 +#define FLAGS_LSO_ENABLED 0x02 +#define FLAGS_IPSEC_SA_ADD 0x04 +#define FLAGS_IPSEC_SA_DELETE 0x08 +#define FLAGS_VLAN_TAGGED 0x10 + +#define CMD_DESC_TOTAL_LENGTH(cmd_desc) \ + ((cmd_desc)->length_tcp_hdr & 0x00FFFFFF) +#define CMD_DESC_TCP_HDR_OFFSET(cmd_desc) \ + (((cmd_desc)->length_tcp_hdr >> 24) & 0x0FF) +#define CMD_DESC_PORT(cmd_desc) ((cmd_desc)->port_ctxid & 0x0F) +#define CMD_DESC_CTX_ID(cmd_desc) (((cmd_desc)->port_ctxid >> 4) & 0x0F) + +#define CMD_DESC_TOTAL_LENGTH_WRT(cmd_desc, var) \ + ((cmd_desc)->length_tcp_hdr |= ((var) & 0x00FFFFFF)) +#define CMD_DESC_TCP_HDR_OFFSET_WRT(cmd_desc, var) \ + ((cmd_desc)->length_tcp_hdr |= (((var) << 24) & 0xFF000000)) +#define CMD_DESC_PORT_WRT(cmd_desc, var) \ + ((cmd_desc)->port_ctxid |= ((var) & 0x0F)) + +struct cmd_desc_type0 { + u64 netxen_next; /* for fragments handled by Phantom */ + union { + struct { + u32 addr_low_part2; + u32 addr_high_part2; + }; + u64 addr_buffer2; + }; + + /* Bit pattern: 0-23 total length, 24-32 tcp header offset */ + u32 length_tcp_hdr; + u8 ip_hdr_offset; /* For LSO only */ + u8 num_of_buffers; /* total number of segments */ + u8 flags; /* as defined above */ + u8 opcode; + + u16 reference_handle; /* changed to u16 to add mss */ + u16 mss; /* passed by NDIS_PACKET for LSO */ + /* Bit pattern 0-3 port, 0-3 ctx id */ + u8 port_ctxid; + u8 total_hdr_length; /* LSO only : MAC+IP+TCP Hdr size */ + u16 conn_id; /* IPSec offoad only */ + + union { + struct { + u32 addr_low_part3; + u32 addr_high_part3; + }; + u64 addr_buffer3; + }; + + union { + struct { + u32 addr_low_part1; + u32 addr_high_part1; + }; + u64 addr_buffer1; + }; + + u16 buffer1_length; + u16 buffer2_length; + u16 buffer3_length; + u16 buffer4_length; + + union { + struct { + u32 addr_low_part4; + u32 addr_high_part4; + }; + u64 addr_buffer4; + }; + +} __attribute__ ((aligned(64))); + +/* Note: sizeof(rcv_desc) should always be a mutliple of 2 */ +struct rcv_desc { + u16 reference_handle; + u16 reserved; + u32 buffer_length; /* allocated buffer length (usually 2K) */ + u64 addr_buffer; +}; + +/* opcode field in status_desc */ +#define RCV_NIC_PKT (0xA) +#define STATUS_NIC_PKT ((RCV_NIC_PKT) << 12) + +/* for status field in status_desc */ +#define STATUS_NEED_CKSUM (1) +#define STATUS_CKSUM_OK (2) + +/* owner bits of status_desc */ +#define STATUS_OWNER_HOST (0x1) +#define STATUS_OWNER_PHANTOM (0x2) + +#define NETXEN_PROT_IP (1) +#define NETXEN_PROT_UNKNOWN (0) + +/* Note: sizeof(status_desc) should always be a mutliple of 2 */ +#define STATUS_DESC_PORT(status_desc) \ + ((status_desc)->port_status_type_op & 0x0F) +#define STATUS_DESC_STATUS(status_desc) \ + (((status_desc)->port_status_type_op >> 4) & 0x0F) +#define STATUS_DESC_TYPE(status_desc) \ + (((status_desc)->port_status_type_op >> 8) & 0x0F) +#define STATUS_DESC_OPCODE(status_desc) \ + (((status_desc)->port_status_type_op >> 12) & 0x0F) + +struct status_desc { + /* Bit pattern: 0-3 port, 4-7 status, 8-11 type, 12-15 opcode */ + u16 port_status_type_op; + u16 total_length; /* NIC mode */ + u16 reference_handle; /* handle for the associated packet */ + /* Bit pattern: 0-1 owner, 2-5 protocol */ + u16 owner; /* Owner of the descriptor */ +} __attribute__ ((aligned(8))); + +enum { + NETXEN_RCV_PEG_0 = 0, + NETXEN_RCV_PEG_1 +}; +/* The version of the main data structure */ +#define NETXEN_BDINFO_VERSION 1 + +/* Magic number to let user know flash is programmed */ +#define NETXEN_BDINFO_MAGIC 0x12345678 + +/* Max number of Gig ports on a Phantom board */ +#define NETXEN_MAX_PORTS 4 + +typedef enum { + NETXEN_BRDTYPE_P1_BD = 0x0000, + NETXEN_BRDTYPE_P1_SB = 0x0001, + NETXEN_BRDTYPE_P1_SMAX = 0x0002, + NETXEN_BRDTYPE_P1_SOCK = 0x0003, + + NETXEN_BRDTYPE_P2_SOCK_31 = 0x0008, + NETXEN_BRDTYPE_P2_SOCK_35 = 0x0009, + NETXEN_BRDTYPE_P2_SB35_4G = 0x000a, + NETXEN_BRDTYPE_P2_SB31_10G = 0x000b, + NETXEN_BRDTYPE_P2_SB31_2G = 0x000c, + + NETXEN_BRDTYPE_P2_SB31_10G_IMEZ = 0x000d, + NETXEN_BRDTYPE_P2_SB31_10G_HMEZ = 0x000e, + NETXEN_BRDTYPE_P2_SB31_10G_CX4 = 0x000f +} netxen_brdtype_t; + +typedef enum { + NETXEN_BRDMFG_INVENTEC = 1 +} netxen_brdmfg; + +typedef enum { + MEM_ORG_128Mbx4 = 0x0, /* DDR1 only */ + MEM_ORG_128Mbx8 = 0x1, /* DDR1 only */ + MEM_ORG_128Mbx16 = 0x2, /* DDR1 only */ + MEM_ORG_256Mbx4 = 0x3, + MEM_ORG_256Mbx8 = 0x4, + MEM_ORG_256Mbx16 = 0x5, + MEM_ORG_512Mbx4 = 0x6, + MEM_ORG_512Mbx8 = 0x7, + MEM_ORG_512Mbx16 = 0x8, + MEM_ORG_1Gbx4 = 0x9, + MEM_ORG_1Gbx8 = 0xa, + MEM_ORG_1Gbx16 = 0xb, + MEM_ORG_2Gbx4 = 0xc, + MEM_ORG_2Gbx8 = 0xd, + MEM_ORG_2Gbx16 = 0xe, + MEM_ORG_128Mbx32 = 0x10002, /* GDDR only */ + MEM_ORG_256Mbx32 = 0x10005 /* GDDR only */ +} netxen_mn_mem_org_t; + +typedef enum { + MEM_ORG_512Kx36 = 0x0, + MEM_ORG_1Mx36 = 0x1, + MEM_ORG_2Mx36 = 0x2 +} netxen_sn_mem_org_t; + +typedef enum { + MEM_DEPTH_4MB = 0x1, + MEM_DEPTH_8MB = 0x2, + MEM_DEPTH_16MB = 0x3, + MEM_DEPTH_32MB = 0x4, + MEM_DEPTH_64MB = 0x5, + MEM_DEPTH_128MB = 0x6, + MEM_DEPTH_256MB = 0x7, + MEM_DEPTH_512MB = 0x8, + MEM_DEPTH_1GB = 0x9, + MEM_DEPTH_2GB = 0xa, + MEM_DEPTH_4GB = 0xb, + MEM_DEPTH_8GB = 0xc, + MEM_DEPTH_16GB = 0xd, + MEM_DEPTH_32GB = 0xe +} netxen_mem_depth_t; + +struct netxen_board_info { + u32 header_version; + + u32 board_mfg; + u32 board_type; + u32 board_num; + u32 chip_id; + u32 chip_minor; + u32 chip_major; + u32 chip_pkg; + u32 chip_lot; + + u32 port_mask; /* available niu ports */ + u32 peg_mask; /* available pegs */ + u32 icache_ok; /* can we run with icache? */ + u32 dcache_ok; /* can we run with dcache? */ + u32 casper_ok; + + u32 mac_addr_lo_0; + u32 mac_addr_lo_1; + u32 mac_addr_lo_2; + u32 mac_addr_lo_3; + + /* MN-related config */ + u32 mn_sync_mode; /* enable/ sync shift cclk/ sync shift mclk */ + u32 mn_sync_shift_cclk; + u32 mn_sync_shift_mclk; + u32 mn_wb_en; + u32 mn_crystal_freq; /* in MHz */ + u32 mn_speed; /* in MHz */ + u32 mn_org; + u32 mn_depth; + u32 mn_ranks_0; /* ranks per slot */ + u32 mn_ranks_1; /* ranks per slot */ + u32 mn_rd_latency_0; + u32 mn_rd_latency_1; + u32 mn_rd_latency_2; + u32 mn_rd_latency_3; + u32 mn_rd_latency_4; + u32 mn_rd_latency_5; + u32 mn_rd_latency_6; + u32 mn_rd_latency_7; + u32 mn_rd_latency_8; + u32 mn_dll_val[18]; + u32 mn_mode_reg; /* MIU DDR Mode Register */ + u32 mn_ext_mode_reg; /* MIU DDR Extended Mode Register */ + u32 mn_timing_0; /* MIU Memory Control Timing Rgister */ + u32 mn_timing_1; /* MIU Extended Memory Ctrl Timing Register */ + u32 mn_timing_2; /* MIU Extended Memory Ctrl Timing2 Register */ + + /* SN-related config */ + u32 sn_sync_mode; /* enable/ sync shift cclk / sync shift mclk */ + u32 sn_pt_mode; /* pass through mode */ + u32 sn_ecc_en; + u32 sn_wb_en; + u32 sn_crystal_freq; + u32 sn_speed; + u32 sn_org; + u32 sn_depth; + u32 sn_dll_tap; + u32 sn_rd_latency; + + u32 mac_addr_hi_0; + u32 mac_addr_hi_1; + u32 mac_addr_hi_2; + u32 mac_addr_hi_3; + + u32 magic; /* indicates flash has been initialized */ + + u32 mn_rdimm; + u32 mn_dll_override; + +}; + +#define FLASH_NUM_PORTS (4) + +struct netxen_flash_mac_addr { + u32 flash_addr[32]; +}; + +struct netxen_user_old_info { + u8 flash_md5[16]; + u8 crbinit_md5[16]; + u8 brdcfg_md5[16]; + /* bootloader */ + u32 bootld_version; + u32 bootld_size; + u8 bootld_md5[16]; + /* image */ + u32 image_version; + u32 image_size; + u8 image_md5[16]; + /* primary image status */ + u32 primary_status; + u32 secondary_present; + + /* MAC address , 4 ports */ + struct netxen_flash_mac_addr mac_addr[FLASH_NUM_PORTS]; +}; +#define FLASH_NUM_MAC_PER_PORT 32 +struct netxen_user_info { + u8 flash_md5[16 * 64]; + /* bootloader */ + u32 bootld_version; + u32 bootld_size; + /* image */ + u32 image_version; + u32 image_size; + /* primary image status */ + u32 primary_status; + u32 secondary_present; + + /* MAC address , 4 ports, 32 address per port */ + u64 mac_addr[FLASH_NUM_PORTS * FLASH_NUM_MAC_PER_PORT]; + u32 sub_sys_id; + u8 serial_num[32]; + + /* Any user defined data */ +}; + +/* + * Flash Layout - new format. + */ +struct netxen_new_user_info { + u8 flash_md5[16 * 64]; + /* bootloader */ + u32 bootld_version; + u32 bootld_size; + /* image */ + u32 image_version; + u32 image_size; + /* primary image status */ + u32 primary_status; + u32 secondary_present; + + /* MAC address , 4 ports, 32 address per port */ + u64 mac_addr[FLASH_NUM_PORTS * FLASH_NUM_MAC_PER_PORT]; + u32 sub_sys_id; + u8 serial_num[32]; + + /* Any user defined data */ +}; + +#define SECONDARY_IMAGE_PRESENT 0xb3b4b5b6 +#define SECONDARY_IMAGE_ABSENT 0xffffffff +#define PRIMARY_IMAGE_GOOD 0x5a5a5a5a +#define PRIMARY_IMAGE_BAD 0xffffffff + +/* Flash memory map */ +typedef enum { + CRBINIT_START = 0, /* Crbinit section */ + BRDCFG_START = 0x4000, /* board config */ + INITCODE_START = 0x6000, /* pegtune code */ + BOOTLD_START = 0x10000, /* bootld */ + IMAGE_START = 0x43000, /* compressed image */ + SECONDARY_START = 0x200000, /* backup images */ + PXE_START = 0x3E0000, /* user defined region */ + USER_START = 0x3E8000, /* User defined region for new boards */ + FIXED_START = 0x3F0000 /* backup of crbinit */ +} netxen_flash_map_t; + +#define USER_START_OLD PXE_START /* for backward compatibility */ + +#define FLASH_START (CRBINIT_START) +#define INIT_SECTOR (0) +#define PRIMARY_START (BOOTLD_START) +#define FLASH_CRBINIT_SIZE (0x4000) +#define FLASH_BRDCFG_SIZE (sizeof(struct netxen_board_info)) +#define FLASH_USER_SIZE (sizeof(netxen_user_info)/sizeof(u32)) +#define FLASH_SECONDARY_SIZE (USER_START-SECONDARY_START) +#define NUM_PRIMARY_SECTORS (0x20) +#define NUM_CONFIG_SECTORS (1) +#define PFX "netxen: " + +/* Note: Make sure to not call this before adapter->port is valid */ +#if !defined(NETXEN_DEBUG) +#define DPRINTK(klevel, fmt, args...) do { \ + } while (0) +#else +#define DPRINTK(klevel, fmt, args...) do { \ + printk(KERN_##klevel PFX "%s: %s: " fmt, __FUNCTION__,\ + (adapter != NULL && adapter->port != NULL && \ + adapter->port[0] != NULL && \ + adapter->port[0]->netdev != NULL) ? \ + adapter->port[0]->netdev->name : NULL, \ + ## args); } while(0) +#endif + +/* Number of status descriptors to handle per interrupt */ +#define MAX_STATUS_HANDLE (128) + +/* + * netxen_skb_frag{} is to contain mapping info for each SG list. This + * has to be freed when DMA is complete. This is part of netxen_tx_buffer{}. + */ +struct netxen_skb_frag { + u64 dma; + u32 length; +}; + +/* Following defines are for the state of the buffers */ +#define NETXEN_BUFFER_FREE 0 +#define NETXEN_BUFFER_BUSY 1 + +/* + * There will be one netxen_buffer per skb packet. These will be + * used to save the dma info for pci_unmap_page() + */ +struct netxen_cmd_buffer { + struct sk_buff *skb; + struct netxen_skb_frag frag_array[MAX_BUFFERS_PER_CMD + 1]; + u32 total_length; + u32 mss; + u16 port; + u8 cmd; + u8 frag_count; + unsigned long time_stamp; + u32 state; + u32 no_of_descriptors; +}; + +/* In rx_buffer, we do not need multiple fragments as is a single buffer */ +struct netxen_rx_buffer { + struct sk_buff *skb; + u64 dma; + u16 ref_handle; + u16 state; +}; + +/* Board types */ +#define NETXEN_NIC_GBE 0x01 +#define NETXEN_NIC_XGBE 0x02 + +/* + * One hardware_context{} per adapter + * contains interrupt info as well shared hardware info. + */ +struct netxen_hardware_context { + struct pci_dev *pdev; + void __iomem *pci_base0; + void __iomem *pci_base1; + void __iomem *pci_base2; + + u8 revision_id; + u16 board_type; + u16 max_ports; + struct netxen_board_info boardcfg; + u32 xg_linkup; + u32 qg_linksup; + /* Address of cmd ring in Phantom */ + struct cmd_desc_type0 *cmd_desc_head; + char *pauseaddr; + struct pci_dev *cmd_desc_pdev; + dma_addr_t cmd_desc_phys_addr; + dma_addr_t pause_physaddr; + struct pci_dev *pause_pdev; + struct netxen_adapter *adapter; +}; + +#define MINIMUM_ETHERNET_FRAME_SIZE 64 /* With FCS */ +#define ETHERNET_FCS_SIZE 4 + +struct netxen_adapter_stats { + u64 ints; + u64 hostints; + u64 otherints; + u64 process_rcv; + u64 process_xmit; + u64 noxmitdone; + u64 xmitcsummed; + u64 post_called; + u64 posted; + u64 lastposted; + u64 goodskbposts; +}; + +/* + * Rcv Descriptor Context. One such per Rcv Descriptor. There may + * be one Rcv Descriptor for normal packets, one for jumbo and may be others. + */ +struct netxen_rcv_desc_ctx { + u32 flags; + u32 producer; + u32 rcv_pending; /* Num of bufs posted in phantom */ + u32 rcv_free; /* Num of bufs in free list */ + dma_addr_t phys_addr; + struct pci_dev *phys_pdev; + struct rcv_desc *desc_head; /* address of rx ring in Phantom */ + u32 max_rx_desc_count; + u32 dma_size; + u32 skb_size; + struct netxen_rx_buffer *rx_buf_arr; /* rx buffers for receive */ + int begin_alloc; +}; + +/* + * Receive context. There is one such structure per instance of the + * receive processing. Any state information that is relevant to + * the receive, and is must be in this structure. The global data may be + * present elsewhere. + */ +struct netxen_recv_context { + struct netxen_rcv_desc_ctx rcv_desc[NUM_RCV_DESC_RINGS]; + u32 status_rx_producer; + u32 status_rx_consumer; + dma_addr_t rcv_status_desc_phys_addr; + struct pci_dev *rcv_status_desc_pdev; + struct status_desc *rcv_status_desc_head; +}; + +#define NETXEN_NIC_MSI_ENABLED 0x02 + +struct netxen_drvops; + +struct netxen_adapter { + struct netxen_hardware_context ahw; + int port_count; /* Number of configured ports */ + int active_ports; /* Number of open ports */ + struct netxen_port *port[NETXEN_MAX_PORTS]; /* ptr to each port */ + spinlock_t tx_lock; + spinlock_t lock; + struct work_struct watchdog_task; + struct work_struct tx_timeout_task; + struct timer_list watchdog_timer; + + u32 curr_window; + + u32 cmd_producer; + u32 cmd_consumer; + + u32 last_cmd_consumer; + u32 max_tx_desc_count; + u32 max_rx_desc_count; + u32 max_jumbo_rx_desc_count; + /* Num of instances active on cmd buffer ring */ + u32 proc_cmd_buf_counter; + + u32 num_threads, total_threads; /*Use to keep track of xmit threads */ + + u32 flags; + u32 irq; + int driver_mismatch; + u32 temp; + + struct netxen_adapter_stats stats; + + struct netxen_cmd_buffer *cmd_buf_arr; /* Command buffers for xmit */ + + /* + * Receive instances. These can be either one per port, + * or one per peg, etc. + */ + struct netxen_recv_context recv_ctx[MAX_RCV_CTX]; + + int is_up; + int work_done; + struct netxen_drvops *ops; +}; /* netxen_adapter structure */ + +/* Max number of xmit producer threads that can run simultaneously */ +#define MAX_XMIT_PRODUCERS 16 + +struct netxen_port_stats { + u64 rcvdbadskb; + u64 xmitcalled; + u64 xmitedframes; + u64 xmitfinished; + u64 badskblen; + u64 nocmddescriptor; + u64 polled; + u64 uphappy; + u64 updropped; + u64 uplcong; + u64 uphcong; + u64 upmcong; + u64 updunno; + u64 skbfreed; + u64 txdropped; + u64 txnullskb; + u64 csummed; + u64 no_rcv; + u64 rxbytes; + u64 txbytes; +}; + +struct netxen_port { + struct netxen_adapter *adapter; + + u16 portnum; /* GBE port number */ + u16 link_speed; + u16 link_duplex; + u16 link_autoneg; + + int flags; + + struct net_device *netdev; + struct pci_dev *pdev; + struct net_device_stats net_stats; + struct netxen_port_stats stats; +}; + +#define PCI_OFFSET_FIRST_RANGE(adapter, off) \ + ((adapter)->ahw.pci_base0 + (off)) +#define PCI_OFFSET_SECOND_RANGE(adapter, off) \ + ((adapter)->ahw.pci_base1 + (off) - SECOND_PAGE_GROUP_START) +#define PCI_OFFSET_THIRD_RANGE(adapter, off) \ + ((adapter)->ahw.pci_base2 + (off) - THIRD_PAGE_GROUP_START) + +static inline void __iomem *pci_base_offset(struct netxen_adapter *adapter, + unsigned long off) +{ + if ((off < FIRST_PAGE_GROUP_END) && (off >= FIRST_PAGE_GROUP_START)) { + return (adapter->ahw.pci_base0 + off); + } else if ((off < SECOND_PAGE_GROUP_END) && + (off >= SECOND_PAGE_GROUP_START)) { + return (adapter->ahw.pci_base1 + off - SECOND_PAGE_GROUP_START); + } else if ((off < THIRD_PAGE_GROUP_END) && + (off >= THIRD_PAGE_GROUP_START)) { + return (adapter->ahw.pci_base2 + off - THIRD_PAGE_GROUP_START); + } + return NULL; +} + +static inline void __iomem *pci_base(struct netxen_adapter *adapter, + unsigned long off) +{ + if ((off < FIRST_PAGE_GROUP_END) && (off >= FIRST_PAGE_GROUP_START)) { + return adapter->ahw.pci_base0; + } else if ((off < SECOND_PAGE_GROUP_END) && + (off >= SECOND_PAGE_GROUP_START)) { + return adapter->ahw.pci_base1; + } else if ((off < THIRD_PAGE_GROUP_END) && + (off >= THIRD_PAGE_GROUP_START)) { + return adapter->ahw.pci_base2; + } + return NULL; +} + +struct netxen_drvops { + int (*enable_phy_interrupts) (struct netxen_adapter *, int); + int (*disable_phy_interrupts) (struct netxen_adapter *, int); + void (*handle_phy_intr) (struct netxen_adapter *); + int (*macaddr_set) (struct netxen_port *, netxen_ethernet_macaddr_t); + int (*set_mtu) (struct netxen_port *, int); + int (*set_promisc) (struct netxen_adapter *, int, + netxen_niu_prom_mode_t); + int (*unset_promisc) (struct netxen_adapter *, int, + netxen_niu_prom_mode_t); + int (*phy_read) (struct netxen_adapter *, long phy, long reg, u32 *); + int (*phy_write) (struct netxen_adapter *, long phy, long reg, u32 val); + int (*init_port) (struct netxen_adapter *, int); + void (*init_niu) (struct netxen_adapter *); + int (*stop_port) (struct netxen_adapter *, int); +}; + +extern char netxen_nic_driver_name[]; + +int netxen_niu_xgbe_enable_phy_interrupts(struct netxen_adapter *adapter, + int port); +int netxen_niu_gbe_enable_phy_interrupts(struct netxen_adapter *adapter, + int port); +int netxen_niu_xgbe_disable_phy_interrupts(struct netxen_adapter *adapter, + int port); +int netxen_niu_gbe_disable_phy_interrupts(struct netxen_adapter *adapter, + int port); +int netxen_niu_xgbe_clear_phy_interrupts(struct netxen_adapter *adapter, + int port); +int netxen_niu_gbe_clear_phy_interrupts(struct netxen_adapter *adapter, + int port); +void netxen_nic_xgbe_handle_phy_intr(struct netxen_adapter *adapter); +void netxen_nic_gbe_handle_phy_intr(struct netxen_adapter *adapter); +void netxen_niu_gbe_set_mii_mode(struct netxen_adapter *adapter, int port, + long enable); +void netxen_niu_gbe_set_gmii_mode(struct netxen_adapter *adapter, int port, + long enable); +int netxen_niu_gbe_phy_read(struct netxen_adapter *adapter, long phy, long reg, + __le32 * readval); +int netxen_niu_gbe_phy_write(struct netxen_adapter *adapter, long phy, + long reg, __le32 val); + +/* Functions available from netxen_nic_hw.c */ +int netxen_nic_set_mtu_xgb(struct netxen_port *port, int new_mtu); +int netxen_nic_set_mtu_gb(struct netxen_port *port, int new_mtu); +void netxen_nic_init_niu_gb(struct netxen_adapter *adapter); +void netxen_nic_pci_change_crbwindow(struct netxen_adapter *adapter, u32 wndw); +void netxen_nic_reg_write(struct netxen_adapter *adapter, u64 off, u32 val); +int netxen_nic_reg_read(struct netxen_adapter *adapter, u64 off); +void netxen_nic_write_w0(struct netxen_adapter *adapter, u32 index, u32 value); +void netxen_nic_read_w0(struct netxen_adapter *adapter, u32 index, u32 * value); + +int netxen_nic_get_board_info(struct netxen_adapter *adapter); +int netxen_nic_hw_read_wx(struct netxen_adapter *adapter, u64 off, void *data, + int len); +int netxen_nic_hw_write_wx(struct netxen_adapter *adapter, u64 off, void *data, + int len); +void netxen_crb_writelit_adapter(struct netxen_adapter *adapter, + unsigned long off, int data); + +/* Functions from netxen_nic_init.c */ +void netxen_phantom_init(struct netxen_adapter *adapter, int pegtune_val); +void netxen_load_firmware(struct netxen_adapter *adapter); +int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose); +int netxen_rom_fast_read(struct netxen_adapter *adapter, int addr, int *valp); +int netxen_rom_fast_write(struct netxen_adapter *adapter, int addr, int data); +int netxen_rom_se(struct netxen_adapter *adapter, int addr); +int netxen_do_rom_se(struct netxen_adapter *adapter, int addr); + +/* Functions from netxen_nic_isr.c */ +void netxen_nic_isr_other(struct netxen_adapter *adapter); +void netxen_indicate_link_status(struct netxen_adapter *adapter, u32 port, + u32 link); +void netxen_handle_port_int(struct netxen_adapter *adapter, u32 port, + u32 enable); +void netxen_nic_stop_all_ports(struct netxen_adapter *adapter); +void netxen_initialize_adapter_sw(struct netxen_adapter *adapter); +void netxen_initialize_adapter_hw(struct netxen_adapter *adapter); +void *netxen_alloc(struct pci_dev *pdev, size_t sz, dma_addr_t * ptr, + struct pci_dev **used_dev); +void netxen_initialize_adapter_ops(struct netxen_adapter *adapter); +int netxen_init_firmware(struct netxen_adapter *adapter); +void netxen_free_hw_resources(struct netxen_adapter *adapter); +void netxen_tso_check(struct netxen_adapter *adapter, + struct cmd_desc_type0 *desc, struct sk_buff *skb); +int netxen_nic_hw_resources(struct netxen_adapter *adapter); +void netxen_nic_clear_stats(struct netxen_adapter *adapter); +int +netxen_nic_do_ioctl(struct netxen_adapter *adapter, void *u_data, + struct netxen_port *port); +int netxen_nic_rx_has_work(struct netxen_adapter *adapter); +int netxen_nic_tx_has_work(struct netxen_adapter *adapter); +void netxen_watchdog_task(unsigned long v); +void netxen_post_rx_buffers(struct netxen_adapter *adapter, u32 ctx, + u32 ringid); +void netxen_process_cmd_ring(unsigned long data); +u32 netxen_process_rcv_ring(struct netxen_adapter *adapter, int ctx, int max); +void netxen_nic_set_multi(struct net_device *netdev); +int netxen_nic_change_mtu(struct net_device *netdev, int new_mtu); +int netxen_nic_set_mac(struct net_device *netdev, void *p); +struct net_device_stats *netxen_nic_get_stats(struct net_device *netdev); + +static inline void netxen_nic_disable_int(struct netxen_adapter *adapter) +{ + /* + * ISR_INT_MASK: Can be read from window 0 or 1. + */ + writel(0x7ff, PCI_OFFSET_SECOND_RANGE(adapter, ISR_INT_MASK)); + +} + +static inline void netxen_nic_enable_int(struct netxen_adapter *adapter) +{ + u32 mask; + + switch (adapter->ahw.board_type) { + case NETXEN_NIC_GBE: + mask = 0x77b; + break; + case NETXEN_NIC_XGBE: + mask = 0x77f; + break; + default: + mask = 0x7ff; + break; + } + + writel(mask, PCI_OFFSET_SECOND_RANGE(adapter, ISR_INT_MASK)); + + if (!(adapter->flags & NETXEN_NIC_MSI_ENABLED)) { + mask = 0xbff; + writel(mask, PCI_OFFSET_SECOND_RANGE(adapter, + ISR_INT_TARGET_MASK)); + } +} + +/* + * NetXen Board information + */ + +#define NETXEN_MAX_SHORT_NAME 16 +struct netxen_brdinfo { + netxen_brdtype_t brdtype; /* type of board */ + long ports; /* max no of physical ports */ + char short_name[NETXEN_MAX_SHORT_NAME]; +}; + +static const struct netxen_brdinfo netxen_boards[] = { + {NETXEN_BRDTYPE_P2_SB31_10G_CX4, 1, "XGb CX4"}, + {NETXEN_BRDTYPE_P2_SB31_10G_HMEZ, 1, "XGb HMEZ"}, + {NETXEN_BRDTYPE_P2_SB31_10G_IMEZ, 2, "XGb IMEZ"}, + {NETXEN_BRDTYPE_P2_SB31_10G, 1, "XGb XFP"}, + {NETXEN_BRDTYPE_P2_SB35_4G, 4, "Quad Gb"}, + {NETXEN_BRDTYPE_P2_SB31_2G, 2, "Dual Gb"}, +}; + +#define NUM_SUPPORTED_BOARDS (sizeof(netxen_boards)/sizeof(struct netxen_brdinfo)) + +static inline void get_brd_port_by_type(u32 type, int *ports) +{ + int i, found = 0; + for (i = 0; i < NUM_SUPPORTED_BOARDS; ++i) { + if (netxen_boards[i].brdtype == type) { + *ports = netxen_boards[i].ports; + found = 1; + break; + } + } + if (!found) + *ports = 0; +} + +static inline void get_brd_name_by_type(u32 type, char *name) +{ + int i, found = 0; + for (i = 0; i < NUM_SUPPORTED_BOARDS; ++i) { + if (netxen_boards[i].brdtype == type) { + strcpy(name, netxen_boards[i].short_name); + found = 1; + break; + } + + } + if (!found) + name = "Unknown"; +} + +int netxen_is_flash_supported(struct netxen_adapter *adapter); +int netxen_get_flash_mac_addr(struct netxen_adapter *adapter, u64 mac[]); + +extern void netxen_change_ringparam(struct netxen_adapter *adapter); +extern int netxen_rom_fast_read(struct netxen_adapter *adapter, int addr, + int *valp); + +extern struct ethtool_ops netxen_nic_ethtool_ops; + +#endif /* __NETXEN_NIC_H_ */ diff --git a/drivers/net/netxen/netxen_nic_ethtool.c b/drivers/net/netxen/netxen_nic_ethtool.c new file mode 100644 index 00000000000..9a914aeba5b --- /dev/null +++ b/drivers/net/netxen/netxen_nic_ethtool.c @@ -0,0 +1,741 @@ +/* + * Copyright (C) 2003 - 2006 NetXen, Inc. + * All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, + * MA 02111-1307, USA. + * + * The full GNU General Public License is included in this distribution + * in the file called LICENSE. + * + * Contact Information: + * info@netxen.com + * NetXen, + * 3965 Freedom Circle, Fourth floor, + * Santa Clara, CA 95054 + * + * + * ethtool support for netxen nic + * + */ + +#include <linux/types.h> +#include <asm/uaccess.h> +#include <linux/pci.h> +#include <asm/io.h> +#include <linux/netdevice.h> +#include <linux/ethtool.h> +#include <linux/version.h> + +#include "netxen_nic_hw.h" +#include "netxen_nic.h" +#include "netxen_nic_phan_reg.h" +#include "netxen_nic_ioctl.h" + +struct netxen_nic_stats { + char stat_string[ETH_GSTRING_LEN]; + int sizeof_stat; + int stat_offset; +}; + +#define NETXEN_NIC_STAT(m) sizeof(((struct netxen_port *)0)->m), \ + offsetof(struct netxen_port, m) + +#define NETXEN_NIC_PORT_WINDOW 0x10000 +#define NETXEN_NIC_INVALID_DATA 0xDEADBEEF + +static const struct netxen_nic_stats netxen_nic_gstrings_stats[] = { + {"rcvd_bad_skb", NETXEN_NIC_STAT(stats.rcvdbadskb)}, + {"xmit_called", NETXEN_NIC_STAT(stats.xmitcalled)}, + {"xmited_frames", NETXEN_NIC_STAT(stats.xmitedframes)}, + {"xmit_finished", NETXEN_NIC_STAT(stats.xmitfinished)}, + {"bad_skb_len", NETXEN_NIC_STAT(stats.badskblen)}, + {"no_cmd_desc", NETXEN_NIC_STAT(stats.nocmddescriptor)}, + {"polled", NETXEN_NIC_STAT(stats.polled)}, + {"uphappy", NETXEN_NIC_STAT(stats.uphappy)}, + {"updropped", NETXEN_NIC_STAT(stats.updropped)}, + {"uplcong", NETXEN_NIC_STAT(stats.uplcong)}, + {"uphcong", NETXEN_NIC_STAT(stats.uphcong)}, + {"upmcong", NETXEN_NIC_STAT(stats.upmcong)}, + {"updunno", NETXEN_NIC_STAT(stats.updunno)}, + {"skb_freed", NETXEN_NIC_STAT(stats.skbfreed)}, + {"tx_dropped", NETXEN_NIC_STAT(stats.txdropped)}, + {"tx_null_skb", NETXEN_NIC_STAT(stats.txnullskb)}, + {"csummed", NETXEN_NIC_STAT(stats.csummed)}, + {"no_rcv", NETXEN_NIC_STAT(stats.no_rcv)}, + {"rx_bytes", NETXEN_NIC_STAT(stats.rxbytes)}, + {"tx_bytes", NETXEN_NIC_STAT(stats.txbytes)}, +}; + +#define NETXEN_NIC_STATS_LEN \ + sizeof(netxen_nic_gstrings_stats) / sizeof(struct netxen_nic_stats) + +static const char netxen_nic_gstrings_test[][ETH_GSTRING_LEN] = { + "Register_Test_offline", "EEPROM_Test_offline", + "Interrupt_Test_offline", "Loopback_Test_offline", + "Link_Test_on_offline" +}; + +#define NETXEN_NIC_TEST_LEN sizeof(netxen_nic_gstrings_test) / ETH_GSTRING_LEN + +#define NETXEN_NIC_REGS_COUNT 42 +#define NETXEN_NIC_REGS_LEN (NETXEN_NIC_REGS_COUNT * sizeof(__le32)) +#define NETXEN_MAX_EEPROM_LEN 1024 + +static int netxen_nic_get_eeprom_len(struct net_device *dev) +{ + struct netxen_port *port = netdev_priv(dev); + struct netxen_adapter *adapter = port->adapter; + int n; + + if ((netxen_rom_fast_read(adapter, 0, &n) == 0) + && (n & NETXEN_ROM_ROUNDUP)) { + n &= ~NETXEN_ROM_ROUNDUP; + if (n < NETXEN_MAX_EEPROM_LEN) + return n; + } + return 0; +} + +static void +netxen_nic_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *drvinfo) +{ + struct netxen_port *port = netdev_priv(dev); + struct netxen_adapter *adapter = port->adapter; + u32 fw_major = 0; + u32 fw_minor = 0; + u32 fw_build = 0; + + strncpy(drvinfo->driver, "netxen_nic", 32); + strncpy(drvinfo->version, NETXEN_NIC_LINUX_VERSIONID, 32); + fw_major = readl(NETXEN_CRB_NORMALIZE(adapter, + NETXEN_FW_VERSION_MAJOR)); + fw_minor = readl(NETXEN_CRB_NORMALIZE(adapter, + NETXEN_FW_VERSION_MINOR)); + fw_build = readl(NETXEN_CRB_NORMALIZE(adapter, NETXEN_FW_VERSION_SUB)); + sprintf(drvinfo->fw_version, "%d.%d.%d", fw_major, fw_minor, fw_build); + + strncpy(drvinfo->bus_info, pci_name(port->pdev), 32); + drvinfo->n_stats = NETXEN_NIC_STATS_LEN; + drvinfo->testinfo_len = NETXEN_NIC_TEST_LEN; + drvinfo->regdump_len = NETXEN_NIC_REGS_LEN; + drvinfo->eedump_len = netxen_nic_get_eeprom_len(dev); +} + +static int +netxen_nic_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd) +{ + struct netxen_port *port = netdev_priv(dev); + struct netxen_adapter *adapter = port->adapter; + struct netxen_board_info *boardinfo = &adapter->ahw.boardcfg; + + /* read which mode */ + if (adapter->ahw.board_type == NETXEN_NIC_GBE) { + ecmd->supported = (SUPPORTED_10baseT_Half | + SUPPORTED_10baseT_Full | + SUPPORTED_100baseT_Half | + SUPPORTED_100baseT_Full | + SUPPORTED_1000baseT_Half | + SUPPORTED_1000baseT_Full); + + ecmd->advertising = (ADVERTISED_100baseT_Half | + ADVERTISED_100baseT_Full | + ADVERTISED_1000baseT_Half | + ADVERTISED_1000baseT_Full); + + ecmd->port = PORT_TP; + + if (netif_running(dev)) { + ecmd->speed = port->link_speed; + ecmd->duplex = port->link_duplex; + } else + return -EIO; /* link absent */ + } else if (adapter->ahw.board_type == NETXEN_NIC_XGBE) { + ecmd->supported = (SUPPORTED_TP | + SUPPORTED_1000baseT_Full | + SUPPORTED_10000baseT_Full); + ecmd->advertising = (ADVERTISED_TP | + ADVERTISED_1000baseT_Full | + ADVERTISED_10000baseT_Full); + ecmd->port = PORT_TP; + + ecmd->speed = SPEED_10000; + ecmd->duplex = DUPLEX_FULL; + ecmd->autoneg = AUTONEG_DISABLE; + } else + return -EIO; + + ecmd->phy_address = port->portnum; + ecmd->transceiver = XCVR_EXTERNAL; + + switch ((netxen_brdtype_t) boardinfo->board_type) { + case NETXEN_BRDTYPE_P2_SB35_4G: + case NETXEN_BRDTYPE_P2_SB31_2G: + ecmd->supported |= SUPPORTED_Autoneg; + ecmd->advertising |= ADVERTISED_Autoneg; + case NETXEN_BRDTYPE_P2_SB31_10G_CX4: + ecmd->supported |= SUPPORTED_TP; + ecmd->advertising |= ADVERTISED_TP; + ecmd->port = PORT_TP; + ecmd->autoneg = (boardinfo->board_type == + NETXEN_BRDTYPE_P2_SB31_10G_CX4) ? + (AUTONEG_DISABLE) : (port->link_autoneg); + break; + case NETXEN_BRDTYPE_P2_SB31_10G_HMEZ: + case NETXEN_BRDTYPE_P2_SB31_10G_IMEZ: + ecmd->supported |= SUPPORTED_MII; + ecmd->advertising |= ADVERTISED_MII; + ecmd->port = PORT_FIBRE; + ecmd->autoneg = AUTONEG_DISABLE; + break; + case NETXEN_BRDTYPE_P2_SB31_10G: + ecmd->supported |= SUPPORTED_FIBRE; + ecmd->advertising |= ADVERTISED_FIBRE; + ecmd->port = PORT_FIBRE; + ecmd->autoneg = AUTONEG_DISABLE; + break; + default: + printk(KERN_ERR "netxen-nic: Unsupported board model %d\n", + (netxen_brdtype_t) boardinfo->board_type); + return -EIO; + + } + + return 0; +} + +static int +netxen_nic_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd) +{ + struct netxen_port *port = netdev_priv(dev); + struct netxen_adapter *adapter = port->adapter; + __le32 status; + + /* read which mode */ + if (adapter->ahw.board_type == NETXEN_NIC_GBE) { + /* autonegotiation */ + if (adapter->ops->phy_write + && adapter->ops->phy_write(adapter, port->portnum, + NETXEN_NIU_GB_MII_MGMT_ADDR_AUTONEG, + (__le32) ecmd->autoneg) != 0) + return -EIO; + else + port->link_autoneg = ecmd->autoneg; + + if (adapter->ops->phy_read + && adapter->ops->phy_read(adapter, port->portnum, + NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_STATUS, + &status) != 0) + return -EIO; + + /* speed */ + switch (ecmd->speed) { + case SPEED_10: + netxen_set_phy_speed(status, 0); + break; + case SPEED_100: + netxen_set_phy_speed(status, 1); + break; + case SPEED_1000: + netxen_set_phy_speed(status, 2); + break; + } + /* set duplex mode */ + if (ecmd->duplex == DUPLEX_HALF) + netxen_clear_phy_duplex(status); + if (ecmd->duplex == DUPLEX_FULL) + netxen_set_phy_duplex(status); + if (adapter->ops->phy_write + && adapter->ops->phy_write(adapter, port->portnum, + NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_STATUS, + *((int *)&status)) != 0) + return -EIO; + else { + port->link_speed = ecmd->speed; + port->link_duplex = ecmd->duplex; + } + } else + return -EOPNOTSUPP; + + if (netif_running(dev)) { + dev->stop(dev); + dev->open(dev); + } + return 0; +} + +static int netxen_nic_get_regs_len(struct net_device *dev) +{ + return NETXEN_NIC_REGS_LEN; +} + +struct netxen_niu_regs { + __le32 reg[NETXEN_NIC_REGS_COUNT]; +}; + +static struct netxen_niu_regs niu_registers[] = { + { + /* GB Mode */ + { + NETXEN_NIU_GB_SERDES_RESET, + NETXEN_NIU_GB0_MII_MODE, + NETXEN_NIU_GB1_MII_MODE, + NETXEN_NIU_GB2_MII_MODE, + NETXEN_NIU_GB3_MII_MODE, + NETXEN_NIU_GB0_GMII_MODE, + NETXEN_NIU_GB1_GMII_MODE, + NETXEN_NIU_GB2_GMII_MODE, + NETXEN_NIU_GB3_GMII_MODE, + NETXEN_NIU_REMOTE_LOOPBACK, + NETXEN_NIU_GB0_HALF_DUPLEX, + NETXEN_NIU_GB1_HALF_DUPLEX, + NETXEN_NIU_RESET_SYS_FIFOS, + NETXEN_NIU_GB_CRC_DROP, + NETXEN_NIU_GB_DROP_WRONGADDR, + NETXEN_NIU_TEST_MUX_CTL, + + NETXEN_NIU_GB_MAC_CONFIG_0(0), + NETXEN_NIU_GB_MAC_CONFIG_1(0), + NETXEN_NIU_GB_HALF_DUPLEX_CTRL(0), + NETXEN_NIU_GB_MAX_FRAME_SIZE(0), + NETXEN_NIU_GB_TEST_REG(0), + NETXEN_NIU_GB_MII_MGMT_CONFIG(0), + NETXEN_NIU_GB_MII_MGMT_COMMAND(0), + NETXEN_NIU_GB_MII_MGMT_ADDR(0), + NETXEN_NIU_GB_MII_MGMT_CTRL(0), + NETXEN_NIU_GB_MII_MGMT_STATUS(0), + NETXEN_NIU_GB_MII_MGMT_INDICATE(0), + NETXEN_NIU_GB_INTERFACE_CTRL(0), + NETXEN_NIU_GB_INTERFACE_STATUS(0), + NETXEN_NIU_GB_STATION_ADDR_0(0), + NETXEN_NIU_GB_STATION_ADDR_1(0), + -1, + } + }, + { + /* XG Mode */ + { + NETXEN_NIU_XG_SINGLE_TERM, + NETXEN_NIU_XG_DRIVE_HI, + NETXEN_NIU_XG_DRIVE_LO, + NETXEN_NIU_XG_DTX, + NETXEN_NIU_XG_DEQ, + NETXEN_NIU_XG_WORD_ALIGN, + NETXEN_NIU_XG_RESET, + NETXEN_NIU_XG_POWER_DOWN, + NETXEN_NIU_XG_RESET_PLL, + NETXEN_NIU_XG_SERDES_LOOPBACK, + NETXEN_NIU_XG_DO_BYTE_ALIGN, + NETXEN_NIU_XG_TX_ENABLE, + NETXEN_NIU_XG_RX_ENABLE, + NETXEN_NIU_XG_STATUS, + NETXEN_NIU_XG_PAUSE_THRESHOLD, + NETXEN_NIU_XGE_CONFIG_0, + NETXEN_NIU_XGE_CONFIG_1, + NETXEN_NIU_XGE_IPG, + NETXEN_NIU_XGE_STATION_ADDR_0_HI, + NETXEN_NIU_XGE_STATION_ADDR_0_1, + NETXEN_NIU_XGE_STATION_ADDR_1_LO, + NETXEN_NIU_XGE_STATUS, + NETXEN_NIU_XGE_MAX_FRAME_SIZE, + NETXEN_NIU_XGE_PAUSE_FRAME_VALUE, + NETXEN_NIU_XGE_TX_BYTE_CNT, + NETXEN_NIU_XGE_TX_FRAME_CNT, + NETXEN_NIU_XGE_RX_BYTE_CNT, + NETXEN_NIU_XGE_RX_FRAME_CNT, + NETXEN_NIU_XGE_AGGR_ERROR_CNT, + NETXEN_NIU_XGE_MULTICAST_FRAME_CNT, + NETXEN_NIU_XGE_UNICAST_FRAME_CNT, + NETXEN_NIU_XGE_CRC_ERROR_CNT, + NETXEN_NIU_XGE_OVERSIZE_FRAME_ERR, + NETXEN_NIU_XGE_UNDERSIZE_FRAME_ERR, + NETXEN_NIU_XGE_LOCAL_ERROR_CNT, + NETXEN_NIU_XGE_REMOTE_ERROR_CNT, + NETXEN_NIU_XGE_CONTROL_CHAR_CNT, + NETXEN_NIU_XGE_PAUSE_FRAME_CNT, + -1, + } + } +}; + +static void +netxen_nic_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *p) +{ + struct netxen_port *port = netdev_priv(dev); + struct netxen_adapter *adapter = port->adapter; + __le32 mode, *regs_buff = p; + void __iomem *addr; + int i, window; + + memset(p, 0, NETXEN_NIC_REGS_LEN); + regs->version = (1 << 24) | (adapter->ahw.revision_id << 16) | + (port->pdev)->device; + /* which mode */ + NETXEN_NIC_LOCKED_READ_REG(NETXEN_NIU_MODE, ®s_buff[0]); + mode = regs_buff[0]; + + /* Common registers to all the modes */ + NETXEN_NIC_LOCKED_READ_REG(NETXEN_NIU_STRAP_VALUE_SAVE_HIGHER, + ®s_buff[2]); + /* GB/XGB Mode */ + mode = (mode / 2) - 1; + window = 0; + if (mode <= 1) { + for (i = 3; niu_registers[mode].reg[i - 3] != -1; i++) { + /* GB: port specific registers */ + if (mode == 0 && i >= 19) + window = port->portnum * NETXEN_NIC_PORT_WINDOW; + + NETXEN_NIC_LOCKED_READ_REG(niu_registers[mode]. + reg[i - 3] + window, + ®s_buff[i]); + } + + } +} + +static void +netxen_nic_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol) +{ + wol->supported = WAKE_UCAST | WAKE_MCAST | WAKE_BCAST | WAKE_MAGIC; + /* options can be added depending upon the mode */ + wol->wolopts = 0; +} + +static u32 netxen_nic_get_link(struct net_device *dev) +{ + struct netxen_port *port = netdev_priv(dev); + struct netxen_adapter *adapter = port->adapter; + __le32 status; + + /* read which mode */ + if (adapter->ahw.board_type == NETXEN_NIC_GBE) { + if (adapter->ops->phy_read + && adapter->ops->phy_read(adapter, port->portnum, + NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_STATUS, + &status) != 0) + return -EIO; + else + return (netxen_get_phy_link(status)); + } else if (adapter->ahw.board_type == NETXEN_NIC_XGBE) { + int val = readl(NETXEN_CRB_NORMALIZE(adapter, CRB_XG_STATE)); + return val == XG_LINK_UP; + } + return -EIO; +} + +static int +netxen_nic_get_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom, + u8 * bytes) +{ + struct netxen_port *port = netdev_priv(dev); + struct netxen_adapter *adapter = port->adapter; + int offset; + + if (eeprom->len == 0) + return -EINVAL; + + eeprom->magic = (port->pdev)->vendor | ((port->pdev)->device << 16); + for (offset = 0; offset < eeprom->len; offset++) + if (netxen_rom_fast_read + (adapter, (8 * offset) + 8, (int *)eeprom->data) == -1) + return -EIO; + return 0; +} + +static void +netxen_nic_get_ringparam(struct net_device *dev, struct ethtool_ringparam *ring) +{ + struct netxen_port *port = netdev_priv(dev); + struct netxen_adapter *adapter = port->adapter; + int i, j; + + ring->rx_pending = 0; + for (i = 0; i < MAX_RCV_CTX; ++i) { + for (j = 0; j < NUM_RCV_DESC_RINGS; j++) + ring->rx_pending += + adapter->recv_ctx[i].rcv_desc[j].rcv_pending; + } + + ring->rx_max_pending = adapter->max_rx_desc_count; + ring->tx_max_pending = adapter->max_tx_desc_count; + ring->rx_mini_max_pending = 0; + ring->rx_mini_pending = 0; + ring->rx_jumbo_max_pending = 0; + ring->rx_jumbo_pending = 0; +} + +static void +netxen_nic_get_pauseparam(struct net_device *dev, + struct ethtool_pauseparam *pause) +{ + struct netxen_port *port = netdev_priv(dev); + struct netxen_adapter *adapter = port->adapter; + __le32 val; + + if (adapter->ahw.board_type == NETXEN_NIC_GBE) { + /* get flow control settings */ + netxen_nic_read_w0(adapter, + NETXEN_NIU_GB_MAC_CONFIG_0(port->portnum), + (u32 *) & val); + pause->rx_pause = netxen_gb_get_rx_flowctl(val); + pause->tx_pause = netxen_gb_get_tx_flowctl(val); + /* get autoneg settings */ + pause->autoneg = port->link_autoneg; + } +} + +static int +netxen_nic_set_pauseparam(struct net_device *dev, + struct ethtool_pauseparam *pause) +{ + struct netxen_port *port = netdev_priv(dev); + struct netxen_adapter *adapter = port->adapter; + __le32 val; + unsigned int autoneg; + + /* read mode */ + if (adapter->ahw.board_type == NETXEN_NIC_GBE) { + /* set flow control */ + netxen_nic_read_w0(adapter, + NETXEN_NIU_GB_MAC_CONFIG_0(port->portnum), + (u32 *) & val); + if (pause->tx_pause) + netxen_gb_tx_flowctl(val); + else + netxen_gb_unset_tx_flowctl(val); + if (pause->rx_pause) + netxen_gb_rx_flowctl(val); + else + netxen_gb_unset_rx_flowctl(val); + + netxen_nic_write_w0(adapter, + NETXEN_NIU_GB_MAC_CONFIG_0(port->portnum), + *(u32 *) (&val)); + /* set autoneg */ + autoneg = pause->autoneg; + if (adapter->ops->phy_write + && adapter->ops->phy_write(adapter, port->portnum, + NETXEN_NIU_GB_MII_MGMT_ADDR_AUTONEG, + (__le32) autoneg) != 0) + return -EIO; + else { + port->link_autoneg = pause->autoneg; + return 0; + } + } else + return -EOPNOTSUPP; +} + +static int netxen_nic_reg_test(struct net_device *dev) +{ + struct netxen_port *port = netdev_priv(dev); + struct netxen_adapter *adapter = port->adapter; + u32 data_read, data_written, save; + __le32 mode; + + /* + * first test the "Read Only" registers by writing which mode + */ + netxen_nic_read_w0(adapter, NETXEN_NIU_MODE, &mode); + if (netxen_get_niu_enable_ge(mode)) { /* GB Mode */ + netxen_nic_read_w0(adapter, + NETXEN_NIU_GB_MII_MGMT_STATUS(port->portnum), + &data_read); + + save = data_read; + if (data_read) + data_written = data_read & NETXEN_NIC_INVALID_DATA; + else + data_written = NETXEN_NIC_INVALID_DATA; + netxen_nic_write_w0(adapter, + NETXEN_NIU_GB_MII_MGMT_STATUS(port-> + portnum), + data_written); + netxen_nic_read_w0(adapter, + NETXEN_NIU_GB_MII_MGMT_STATUS(port->portnum), + &data_read); + + if (data_written == data_read) { + netxen_nic_write_w0(adapter, + NETXEN_NIU_GB_MII_MGMT_STATUS(port-> + portnum), + save); + + return 0; + } + + /* netxen_niu_gb_mii_mgmt_indicators is read only */ + netxen_nic_read_w0(adapter, + NETXEN_NIU_GB_MII_MGMT_INDICATE(port-> + portnum), + &data_read); + + save = data_read; + if (data_read) + data_written = data_read & NETXEN_NIC_INVALID_DATA; + else + data_written = NETXEN_NIC_INVALID_DATA; + netxen_nic_write_w0(adapter, + NETXEN_NIU_GB_MII_MGMT_INDICATE(port-> + portnum), + data_written); + + netxen_nic_read_w0(adapter, + NETXEN_NIU_GB_MII_MGMT_INDICATE(port-> + portnum), + &data_read); + + if (data_written == data_read) { + netxen_nic_write_w0(adapter, + NETXEN_NIU_GB_MII_MGMT_INDICATE + (port->portnum), save); + return 0; + } + + /* netxen_niu_gb_interface_status is read only */ + netxen_nic_read_w0(adapter, + NETXEN_NIU_GB_INTERFACE_STATUS(port-> + portnum), + &data_read); + + save = data_read; + if (data_read) + data_written = data_read & NETXEN_NIC_INVALID_DATA; + else + data_written = NETXEN_NIC_INVALID_DATA; + netxen_nic_write_w0(adapter, + NETXEN_NIU_GB_INTERFACE_STATUS(port-> + portnum), + data_written); + + netxen_nic_read_w0(adapter, + NETXEN_NIU_GB_INTERFACE_STATUS(port-> + portnum), + &data_read); + + if (data_written == data_read) { + netxen_nic_write_w0(adapter, + NETXEN_NIU_GB_INTERFACE_STATUS + (port->portnum), save); + + return 0; + } + } /* GB Mode */ + return 1; +} + +static int netxen_nic_diag_test_count(struct net_device *dev) +{ + return NETXEN_NIC_TEST_LEN; +} + +static void +netxen_nic_diag_test(struct net_device *dev, struct ethtool_test *eth_test, + u64 * data) +{ + if (eth_test->flags == ETH_TEST_FL_OFFLINE) { /* offline tests */ + /* link test */ + if (!(data[4] = (u64) netxen_nic_get_link(dev))) + eth_test->flags |= ETH_TEST_FL_FAILED; + + if (netif_running(dev)) + dev->stop(dev); + + /* register tests */ + if (!(data[0] = netxen_nic_reg_test(dev))) + eth_test->flags |= ETH_TEST_FL_FAILED; + /* other tests pass as of now */ + data[1] = data[2] = data[3] = 1; + if (netif_running(dev)) + dev->open(dev); + } else { /* online tests */ + /* link test */ + if (!(data[4] = (u64) netxen_nic_get_link(dev))) + eth_test->flags |= ETH_TEST_FL_FAILED; + + /* other tests pass by default */ + data[0] = data[1] = data[2] = data[3] = 1; + } +} + +static void +netxen_nic_get_strings(struct net_device *dev, u32 stringset, u8 * data) +{ + int index; + + switch (stringset) { + case ETH_SS_TEST: + memcpy(data, *netxen_nic_gstrings_test, + NETXEN_NIC_TEST_LEN * ETH_GSTRING_LEN); + break; + case ETH_SS_STATS: + for (index = 0; index < NETXEN_NIC_STATS_LEN; index++) { + memcpy(data + index * ETH_GSTRING_LEN, + netxen_nic_gstrings_stats[index].stat_string, + ETH_GSTRING_LEN); + } + break; + } +} + +static int netxen_nic_get_stats_count(struct net_device *dev) +{ + return NETXEN_NIC_STATS_LEN; +} + +static void +netxen_nic_get_ethtool_stats(struct net_device *dev, + struct ethtool_stats *stats, u64 * data) +{ + struct netxen_port *port = netdev_priv(dev); + int index; + + for (index = 0; index < NETXEN_NIC_STATS_LEN; index++) { + char *p = + (char *)port + netxen_nic_gstrings_stats[index].stat_offset; + data[index] = + (netxen_nic_gstrings_stats[index].sizeof_stat == + sizeof(u64)) ? *(u64 *) p : *(u32 *) p; + } + +} + +struct ethtool_ops netxen_nic_ethtool_ops = { + .get_settings = netxen_nic_get_settings, + .set_settings = netxen_nic_set_settings, + .get_drvinfo = netxen_nic_get_drvinfo, + .get_regs_len = netxen_nic_get_regs_len, + .get_regs = netxen_nic_get_regs, + .get_wol = netxen_nic_get_wol, + .get_link = netxen_nic_get_link, + .get_eeprom_len = netxen_nic_get_eeprom_len, + .get_eeprom = netxen_nic_get_eeprom, + .get_ringparam = netxen_nic_get_ringparam, + .get_pauseparam = netxen_nic_get_pauseparam, + .set_pauseparam = netxen_nic_set_pauseparam, + .get_tx_csum = ethtool_op_get_tx_csum, + .set_tx_csum = ethtool_op_set_tx_csum, + .get_sg = ethtool_op_get_sg, + .set_sg = ethtool_op_set_sg, + .get_tso = ethtool_op_get_tso, + .set_tso = ethtool_op_set_tso, + .self_test_count = netxen_nic_diag_test_count, + .self_test = netxen_nic_diag_test, + .get_strings = netxen_nic_get_strings, + .get_stats_count = netxen_nic_get_stats_count, + .get_ethtool_stats = netxen_nic_get_ethtool_stats, + .get_perm_addr = ethtool_op_get_perm_addr, +}; diff --git a/drivers/net/netxen/netxen_nic_hdr.h b/drivers/net/netxen/netxen_nic_hdr.h new file mode 100644 index 00000000000..72c6ec4ee2a --- /dev/null +++ b/drivers/net/netxen/netxen_nic_hdr.h @@ -0,0 +1,678 @@ +/* + * Copyright (C) 2003 - 2006 NetXen, Inc. + * All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, + * MA 02111-1307, USA. + * + * The full GNU General Public License is included in this distribution + * in the file called LICENSE. + * + * Contact Information: + * info@netxen.com + * NetXen, + * 3965 Freedom Circle, Fourth floor, + * Santa Clara, CA 95054 + */ + +#ifndef __NETXEN_NIC_HDR_H_ +#define __NETXEN_NIC_HDR_H_ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/version.h> + +#include <asm/semaphore.h> +#include <linux/spinlock.h> +#include <asm/irq.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/pci.h> +#include <linux/types.h> +#include <asm/uaccess.h> +#include <asm/string.h> /* for memset */ + +/* + * The basic unit of access when reading/writing control registers. + */ + +typedef __le32 netxen_crbword_t; /* single word in CRB space */ + +enum { + NETXEN_HW_H0_CH_HUB_ADR = 0x05, + NETXEN_HW_H1_CH_HUB_ADR = 0x0E, + NETXEN_HW_H2_CH_HUB_ADR = 0x03, + NETXEN_HW_H3_CH_HUB_ADR = 0x01, + NETXEN_HW_H4_CH_HUB_ADR = 0x06, + NETXEN_HW_H5_CH_HUB_ADR = 0x07, + NETXEN_HW_H6_CH_HUB_ADR = 0x08 +}; + +/* Hub 0 */ +enum { + NETXEN_HW_MN_CRB_AGT_ADR = 0x15, + NETXEN_HW_MS_CRB_AGT_ADR = 0x25 +}; + +/* Hub 1 */ +enum { + NETXEN_HW_PS_CRB_AGT_ADR = 0x73, + NETXEN_HW_SS_CRB_AGT_ADR = 0x20, + NETXEN_HW_RPMX3_CRB_AGT_ADR = 0x0b, + NETXEN_HW_QMS_CRB_AGT_ADR = 0x00, + NETXEN_HW_SQGS0_CRB_AGT_ADR = 0x01, + NETXEN_HW_SQGS1_CRB_AGT_ADR = 0x02, + NETXEN_HW_SQGS2_CRB_AGT_ADR = 0x03, + NETXEN_HW_SQGS3_CRB_AGT_ADR = 0x04, + NETXEN_HW_C2C0_CRB_AGT_ADR = 0x58, + NETXEN_HW_C2C1_CRB_AGT_ADR = 0x59, + NETXEN_HW_C2C2_CRB_AGT_ADR = 0x5a, + NETXEN_HW_RPMX2_CRB_AGT_ADR = 0x0a, + NETXEN_HW_RPMX4_CRB_AGT_ADR = 0x0c, + NETXEN_HW_RPMX7_CRB_AGT_ADR = 0x0f, + NETXEN_HW_RPMX9_CRB_AGT_ADR = 0x12, + NETXEN_HW_SMB_CRB_AGT_ADR = 0x18 +}; + +/* Hub 2 */ +enum { + NETXEN_HW_NIU_CRB_AGT_ADR = 0x31, + NETXEN_HW_I2C0_CRB_AGT_ADR = 0x19, + NETXEN_HW_I2C1_CRB_AGT_ADR = 0x29, + + NETXEN_HW_SN_CRB_AGT_ADR = 0x10, + NETXEN_HW_I2Q_CRB_AGT_ADR = 0x20, + NETXEN_HW_LPC_CRB_AGT_ADR = 0x22, + NETXEN_HW_ROMUSB_CRB_AGT_ADR = 0x21, + NETXEN_HW_QM_CRB_AGT_ADR = 0x66, + NETXEN_HW_SQG0_CRB_AGT_ADR = 0x60, + NETXEN_HW_SQG1_CRB_AGT_ADR = 0x61, + NETXEN_HW_SQG2_CRB_AGT_ADR = 0x62, + NETXEN_HW_SQG3_CRB_AGT_ADR = 0x63, + NETXEN_HW_RPMX1_CRB_AGT_ADR = 0x09, + NETXEN_HW_RPMX5_CRB_AGT_ADR = 0x0d, + NETXEN_HW_RPMX6_CRB_AGT_ADR = 0x0e, + NETXEN_HW_RPMX8_CRB_AGT_ADR = 0x11 +}; + +/* Hub 3 */ +enum { + NETXEN_HW_PH_CRB_AGT_ADR = 0x1A, + NETXEN_HW_SRE_CRB_AGT_ADR = 0x50, + NETXEN_HW_EG_CRB_AGT_ADR = 0x51, + NETXEN_HW_RPMX0_CRB_AGT_ADR = 0x08 +}; + +/* Hub 4 */ +enum { + NETXEN_HW_PEGN0_CRB_AGT_ADR = 0x40, + NETXEN_HW_PEGN1_CRB_AGT_ADR, + NETXEN_HW_PEGN2_CRB_AGT_ADR, + NETXEN_HW_PEGN3_CRB_AGT_ADR, + NETXEN_HW_PEGNI_CRB_AGT_ADR, + NETXEN_HW_PEGND_CRB_AGT_ADR, + NETXEN_HW_PEGNC_CRB_AGT_ADR, + NETXEN_HW_PEGR0_CRB_AGT_ADR, + NETXEN_HW_PEGR1_CRB_AGT_ADR, + NETXEN_HW_PEGR2_CRB_AGT_ADR, + NETXEN_HW_PEGR3_CRB_AGT_ADR +}; + +/* Hub 5 */ +enum { + NETXEN_HW_PEGS0_CRB_AGT_ADR = 0x40, + NETXEN_HW_PEGS1_CRB_AGT_ADR, + NETXEN_HW_PEGS2_CRB_AGT_ADR, + NETXEN_HW_PEGS3_CRB_AGT_ADR, + NETXEN_HW_PEGSI_CRB_AGT_ADR, + NETXEN_HW_PEGSD_CRB_AGT_ADR, + NETXEN_HW_PEGSC_CRB_AGT_ADR +}; + +/* Hub 6 */ +enum { + NETXEN_HW_CAS0_CRB_AGT_ADR = 0x46, + NETXEN_HW_CAS1_CRB_AGT_ADR = 0x47, + NETXEN_HW_CAS2_CRB_AGT_ADR = 0x48, + NETXEN_HW_CAS3_CRB_AGT_ADR = 0x49, + NETXEN_HW_NCM_CRB_AGT_ADR = 0x16, + NETXEN_HW_TMR_CRB_AGT_ADR = 0x17, + NETXEN_HW_XDMA_CRB_AGT_ADR = 0x05, + NETXEN_HW_OCM0_CRB_AGT_ADR = 0x06, + NETXEN_HW_OCM1_CRB_AGT_ADR = 0x07 +}; + +/* Floaters - non existent modules */ +#define NETXEN_HW_EFC_RPMX0_CRB_AGT_ADR 0x67 + +/* This field defines PCI/X adr [25:20] of agents on the CRB */ +enum { + NETXEN_HW_PX_MAP_CRB_PH = 0, + NETXEN_HW_PX_MAP_CRB_PS, + NETXEN_HW_PX_MAP_CRB_MN, + NETXEN_HW_PX_MAP_CRB_MS, + NETXEN_HW_PX_MAP_CRB_PGR1, + NETXEN_HW_PX_MAP_CRB_SRE, + NETXEN_HW_PX_MAP_CRB_NIU, + NETXEN_HW_PX_MAP_CRB_QMN, + NETXEN_HW_PX_MAP_CRB_SQN0, + NETXEN_HW_PX_MAP_CRB_SQN1, + NETXEN_HW_PX_MAP_CRB_SQN2, + NETXEN_HW_PX_MAP_CRB_SQN3, + NETXEN_HW_PX_MAP_CRB_QMS, + NETXEN_HW_PX_MAP_CRB_SQS0, + NETXEN_HW_PX_MAP_CRB_SQS1, + NETXEN_HW_PX_MAP_CRB_SQS2, + NETXEN_HW_PX_MAP_CRB_SQS3, + NETXEN_HW_PX_MAP_CRB_PGN0, + NETXEN_HW_PX_MAP_CRB_PGN1, + NETXEN_HW_PX_MAP_CRB_PGN2, + NETXEN_HW_PX_MAP_CRB_PGN3, + NETXEN_HW_PX_MAP_CRB_PGND, + NETXEN_HW_PX_MAP_CRB_PGNI, + NETXEN_HW_PX_MAP_CRB_PGS0, + NETXEN_HW_PX_MAP_CRB_PGS1, + NETXEN_HW_PX_MAP_CRB_PGS2, + NETXEN_HW_PX_MAP_CRB_PGS3, + NETXEN_HW_PX_MAP_CRB_PGSD, + NETXEN_HW_PX_MAP_CRB_PGSI, + NETXEN_HW_PX_MAP_CRB_SN, + NETXEN_HW_PX_MAP_CRB_PGR2, + NETXEN_HW_PX_MAP_CRB_EG, + NETXEN_HW_PX_MAP_CRB_PH2, + NETXEN_HW_PX_MAP_CRB_PS2, + NETXEN_HW_PX_MAP_CRB_CAM, + NETXEN_HW_PX_MAP_CRB_CAS0, + NETXEN_HW_PX_MAP_CRB_CAS1, + NETXEN_HW_PX_MAP_CRB_CAS2, + NETXEN_HW_PX_MAP_CRB_C2C0, + NETXEN_HW_PX_MAP_CRB_C2C1, + NETXEN_HW_PX_MAP_CRB_TIMR, + NETXEN_HW_PX_MAP_CRB_PGR3, + NETXEN_HW_PX_MAP_CRB_RPMX1, + NETXEN_HW_PX_MAP_CRB_RPMX2, + NETXEN_HW_PX_MAP_CRB_RPMX3, + NETXEN_HW_PX_MAP_CRB_RPMX4, + NETXEN_HW_PX_MAP_CRB_RPMX5, + NETXEN_HW_PX_MAP_CRB_RPMX6, + NETXEN_HW_PX_MAP_CRB_RPMX7, + NETXEN_HW_PX_MAP_CRB_XDMA, + NETXEN_HW_PX_MAP_CRB_I2Q, + NETXEN_HW_PX_MAP_CRB_ROMUSB, + NETXEN_HW_PX_MAP_CRB_CAS3, + NETXEN_HW_PX_MAP_CRB_RPMX0, + NETXEN_HW_PX_MAP_CRB_RPMX8, + NETXEN_HW_PX_MAP_CRB_RPMX9, + NETXEN_HW_PX_MAP_CRB_OCM0, + NETXEN_HW_PX_MAP_CRB_OCM1, + NETXEN_HW_PX_MAP_CRB_SMB, + NETXEN_HW_PX_MAP_CRB_I2C0, + NETXEN_HW_PX_MAP_CRB_I2C1, + NETXEN_HW_PX_MAP_CRB_LPC, + NETXEN_HW_PX_MAP_CRB_PGNC, + NETXEN_HW_PX_MAP_CRB_PGR0 +}; + +/* This field defines CRB adr [31:20] of the agents */ + +#define NETXEN_HW_CRB_HUB_AGT_ADR_MN \ + ((NETXEN_HW_H0_CH_HUB_ADR << 7) | NETXEN_HW_MN_CRB_AGT_ADR) +#define NETXEN_HW_CRB_HUB_AGT_ADR_PH \ + ((NETXEN_HW_H0_CH_HUB_ADR << 7) | NETXEN_HW_PH_CRB_AGT_ADR) +#define NETXEN_HW_CRB_HUB_AGT_ADR_MS \ + ((NETXEN_HW_H0_CH_HUB_ADR << 7) | NETXEN_HW_MS_CRB_AGT_ADR) + +#define NETXEN_HW_CRB_HUB_AGT_ADR_PS \ + ((NETXEN_HW_H1_CH_HUB_ADR << 7) | NETXEN_HW_PS_CRB_AGT_ADR) +#define NETXEN_HW_CRB_HUB_AGT_ADR_SS \ + ((NETXEN_HW_H1_CH_HUB_ADR << 7) | NETXEN_HW_SS_CRB_AGT_ADR) +#define NETXEN_HW_CRB_HUB_AGT_ADR_RPMX3 \ + ((NETXEN_HW_H1_CH_HUB_ADR << 7) | NETXEN_HW_RPMX3_CRB_AGT_ADR) +#define NETXEN_HW_CRB_HUB_AGT_ADR_QMS \ + ((NETXEN_HW_H1_CH_HUB_ADR << 7) | NETXEN_HW_QMS_CRB_AGT_ADR) +#define NETXEN_HW_CRB_HUB_AGT_ADR_SQS0 \ + ((NETXEN_HW_H1_CH_HUB_ADR << 7) | NETXEN_HW_SQGS0_CRB_AGT_ADR) +#define NETXEN_HW_CRB_HUB_AGT_ADR_SQS1 \ + ((NETXEN_HW_H1_CH_HUB_ADR << 7) | NETXEN_HW_SQGS1_CRB_AGT_ADR) +#define NETXEN_HW_CRB_HUB_AGT_ADR_SQS2 \ + ((NETXEN_HW_H1_CH_HUB_ADR << 7) | NETXEN_HW_SQGS2_CRB_AGT_ADR) +#define NETXEN_HW_CRB_HUB_AGT_ADR_SQS3 \ + ((NETXEN_HW_H1_CH_HUB_ADR << 7) | NETXEN_HW_SQGS3_CRB_AGT_ADR) +#define NETXEN_HW_CRB_HUB_AGT_ADR_C2C0 \ + ((NETXEN_HW_H1_CH_HUB_ADR << 7) | NETXEN_HW_C2C0_CRB_AGT_ADR) +#define NETXEN_HW_CRB_HUB_AGT_ADR_C2C1 \ + ((NETXEN_HW_H1_CH_HUB_ADR << 7) | NETXEN_HW_C2C1_CRB_AGT_ADR) +#define NETXEN_HW_CRB_HUB_AGT_ADR_RPMX2 \ + ((NETXEN_HW_H1_CH_HUB_ADR << 7) | NETXEN_HW_RPMX2_CRB_AGT_ADR) +#define NETXEN_HW_CRB_HUB_AGT_ADR_RPMX4 \ + ((NETXEN_HW_H1_CH_HUB_ADR << 7) | NETXEN_HW_RPMX4_CRB_AGT_ADR) +#define NETXEN_HW_CRB_HUB_AGT_ADR_RPMX7 \ + ((NETXEN_HW_H1_CH_HUB_ADR << 7) | NETXEN_HW_RPMX7_CRB_AGT_ADR) +#define NETXEN_HW_CRB_HUB_AGT_ADR_RPMX9 \ + ((NETXEN_HW_H1_CH_HUB_ADR << 7) | NETXEN_HW_RPMX9_CRB_AGT_ADR) +#define NETXEN_HW_CRB_HUB_AGT_ADR_SMB \ + ((NETXEN_HW_H1_CH_HUB_ADR << 7) | NETXEN_HW_SMB_CRB_AGT_ADR) + +#define NETXEN_HW_CRB_HUB_AGT_ADR_NIU \ + ((NETXEN_HW_H2_CH_HUB_ADR << 7) | NETXEN_HW_NIU_CRB_AGT_ADR) +#define NETXEN_HW_CRB_HUB_AGT_ADR_I2C0 \ + ((NETXEN_HW_H2_CH_HUB_ADR << 7) | NETXEN_HW_I2C0_CRB_AGT_ADR) +#define NETXEN_HW_CRB_HUB_AGT_ADR_I2C1 \ + ((NETXEN_HW_H2_CH_HUB_ADR << 7) | NETXEN_HW_I2C1_CRB_AGT_ADR) + +#define NETXEN_HW_CRB_HUB_AGT_ADR_SRE \ + ((NETXEN_HW_H3_CH_HUB_ADR << 7) | NETXEN_HW_SRE_CRB_AGT_ADR) +#define NETXEN_HW_CRB_HUB_AGT_ADR_EG \ + ((NETXEN_HW_H3_CH_HUB_ADR << 7) | NETXEN_HW_EG_CRB_AGT_ADR) +#define NETXEN_HW_CRB_HUB_AGT_ADR_RPMX0 \ + ((NETXEN_HW_H3_CH_HUB_ADR << 7) | NETXEN_HW_RPMX0_CRB_AGT_ADR) +#define NETXEN_HW_CRB_HUB_AGT_ADR_QMN \ + ((NETXEN_HW_H3_CH_HUB_ADR << 7) | NETXEN_HW_QM_CRB_AGT_ADR) +#define NETXEN_HW_CRB_HUB_AGT_ADR_SQN0 \ + ((NETXEN_HW_H3_CH_HUB_ADR << 7) | NETXEN_HW_SQG0_CRB_AGT_ADR) +#define NETXEN_HW_CRB_HUB_AGT_ADR_SQN1 \ + ((NETXEN_HW_H3_CH_HUB_ADR << 7) | NETXEN_HW_SQG1_CRB_AGT_ADR) +#define NETXEN_HW_CRB_HUB_AGT_ADR_SQN2 \ + ((NETXEN_HW_H3_CH_HUB_ADR << 7) | NETXEN_HW_SQG2_CRB_AGT_ADR) +#define NETXEN_HW_CRB_HUB_AGT_ADR_SQN3 \ + ((NETXEN_HW_H3_CH_HUB_ADR << 7) | NETXEN_HW_SQG3_CRB_AGT_ADR) +#define NETXEN_HW_CRB_HUB_AGT_ADR_RPMX1 \ + ((NETXEN_HW_H3_CH_HUB_ADR << 7) | NETXEN_HW_RPMX1_CRB_AGT_ADR) +#define NETXEN_HW_CRB_HUB_AGT_ADR_RPMX5 \ + ((NETXEN_HW_H3_CH_HUB_ADR << 7) | NETXEN_HW_RPMX5_CRB_AGT_ADR) +#define NETXEN_HW_CRB_HUB_AGT_ADR_RPMX6 \ + ((NETXEN_HW_H3_CH_HUB_ADR << 7) | NETXEN_HW_RPMX6_CRB_AGT_ADR) +#define NETXEN_HW_CRB_HUB_AGT_ADR_RPMX8 \ + ((NETXEN_HW_H3_CH_HUB_ADR << 7) | NETXEN_HW_RPMX8_CRB_AGT_ADR) +#define NETXEN_HW_CRB_HUB_AGT_ADR_CAS0 \ + ((NETXEN_HW_H3_CH_HUB_ADR << 7) | NETXEN_HW_CAS0_CRB_AGT_ADR) +#define NETXEN_HW_CRB_HUB_AGT_ADR_CAS1 \ + ((NETXEN_HW_H3_CH_HUB_ADR << 7) | NETXEN_HW_CAS1_CRB_AGT_ADR) +#define NETXEN_HW_CRB_HUB_AGT_ADR_CAS2 \ + ((NETXEN_HW_H3_CH_HUB_ADR << 7) | NETXEN_HW_CAS2_CRB_AGT_ADR) +#define NETXEN_HW_CRB_HUB_AGT_ADR_CAS3 \ + ((NETXEN_HW_H3_CH_HUB_ADR << 7) | NETXEN_HW_CAS3_CRB_AGT_ADR) + +#define NETXEN_HW_CRB_HUB_AGT_ADR_PGNI \ + ((NETXEN_HW_H4_CH_HUB_ADR << 7) | NETXEN_HW_PEGNI_CRB_AGT_ADR) +#define NETXEN_HW_CRB_HUB_AGT_ADR_PGND \ + ((NETXEN_HW_H4_CH_HUB_ADR << 7) | NETXEN_HW_PEGND_CRB_AGT_ADR) +#define NETXEN_HW_CRB_HUB_AGT_ADR_PGN0 \ + ((NETXEN_HW_H4_CH_HUB_ADR << 7) | NETXEN_HW_PEGN0_CRB_AGT_ADR) +#define NETXEN_HW_CRB_HUB_AGT_ADR_PGN1 \ + ((NETXEN_HW_H4_CH_HUB_ADR << 7) | NETXEN_HW_PEGN1_CRB_AGT_ADR) +#define NETXEN_HW_CRB_HUB_AGT_ADR_PGN2 \ + ((NETXEN_HW_H4_CH_HUB_ADR << 7) | NETXEN_HW_PEGN2_CRB_AGT_ADR) +#define NETXEN_HW_CRB_HUB_AGT_ADR_PGN3 \ + ((NETXEN_HW_H4_CH_HUB_ADR << 7) | NETXEN_HW_PEGN3_CRB_AGT_ADR) +#define NETXEN_HW_CRB_HUB_AGT_ADR_PGNC \ + ((NETXEN_HW_H4_CH_HUB_ADR << 7) | NETXEN_HW_PEGNC_CRB_AGT_ADR) +#define NETXEN_HW_CRB_HUB_AGT_ADR_PGR0 \ + ((NETXEN_HW_H4_CH_HUB_ADR << 7) | NETXEN_HW_PEGR0_CRB_AGT_ADR) +#define NETXEN_HW_CRB_HUB_AGT_ADR_PGR1 \ + ((NETXEN_HW_H4_CH_HUB_ADR << 7) | NETXEN_HW_PEGR1_CRB_AGT_ADR) +#define NETXEN_HW_CRB_HUB_AGT_ADR_PGR2 \ + ((NETXEN_HW_H4_CH_HUB_ADR << 7) | NETXEN_HW_PEGR2_CRB_AGT_ADR) +#define NETXEN_HW_CRB_HUB_AGT_ADR_PGR3 \ + ((NETXEN_HW_H4_CH_HUB_ADR << 7) | NETXEN_HW_PEGR3_CRB_AGT_ADR) + +#define NETXEN_HW_CRB_HUB_AGT_ADR_PGSI \ + ((NETXEN_HW_H5_CH_HUB_ADR << 7) | NETXEN_HW_PEGSI_CRB_AGT_ADR) +#define NETXEN_HW_CRB_HUB_AGT_ADR_PGSD \ + ((NETXEN_HW_H5_CH_HUB_ADR << 7) | NETXEN_HW_PEGSD_CRB_AGT_ADR) +#define NETXEN_HW_CRB_HUB_AGT_ADR_PGS0 \ + ((NETXEN_HW_H5_CH_HUB_ADR << 7) | NETXEN_HW_PEGS0_CRB_AGT_ADR) +#define NETXEN_HW_CRB_HUB_AGT_ADR_PGS1 \ + ((NETXEN_HW_H5_CH_HUB_ADR << 7) | NETXEN_HW_PEGS1_CRB_AGT_ADR) +#define NETXEN_HW_CRB_HUB_AGT_ADR_PGS2 \ + ((NETXEN_HW_H5_CH_HUB_ADR << 7) | NETXEN_HW_PEGS2_CRB_AGT_ADR) +#define NETXEN_HW_CRB_HUB_AGT_ADR_PGS3 \ + ((NETXEN_HW_H5_CH_HUB_ADR << 7) | NETXEN_HW_PEGS3_CRB_AGT_ADR) +#define NETXEN_HW_CRB_HUB_AGT_ADR_PGSC \ + ((NETXEN_HW_H5_CH_HUB_ADR << 7) | NETXEN_HW_PEGSC_CRB_AGT_ADR) + +#define NETXEN_HW_CRB_HUB_AGT_ADR_CAM \ + ((NETXEN_HW_H6_CH_HUB_ADR << 7) | NETXEN_HW_NCM_CRB_AGT_ADR) +#define NETXEN_HW_CRB_HUB_AGT_ADR_TIMR \ + ((NETXEN_HW_H6_CH_HUB_ADR << 7) | NETXEN_HW_TMR_CRB_AGT_ADR) +#define NETXEN_HW_CRB_HUB_AGT_ADR_XDMA \ + ((NETXEN_HW_H6_CH_HUB_ADR << 7) | NETXEN_HW_XDMA_CRB_AGT_ADR) +#define NETXEN_HW_CRB_HUB_AGT_ADR_SN \ + ((NETXEN_HW_H6_CH_HUB_ADR << 7) | NETXEN_HW_SN_CRB_AGT_ADR) +#define NETXEN_HW_CRB_HUB_AGT_ADR_I2Q \ + ((NETXEN_HW_H6_CH_HUB_ADR << 7) | NETXEN_HW_I2Q_CRB_AGT_ADR) +#define NETXEN_HW_CRB_HUB_AGT_ADR_ROMUSB \ + ((NETXEN_HW_H6_CH_HUB_ADR << 7) | NETXEN_HW_ROMUSB_CRB_AGT_ADR) +#define NETXEN_HW_CRB_HUB_AGT_ADR_OCM0 \ + ((NETXEN_HW_H6_CH_HUB_ADR << 7) | NETXEN_HW_OCM0_CRB_AGT_ADR) +#define NETXEN_HW_CRB_HUB_AGT_ADR_OCM1 \ + ((NETXEN_HW_H6_CH_HUB_ADR << 7) | NETXEN_HW_OCM1_CRB_AGT_ADR) +#define NETXEN_HW_CRB_HUB_AGT_ADR_LPC \ + ((NETXEN_HW_H6_CH_HUB_ADR << 7) | NETXEN_HW_LPC_CRB_AGT_ADR) + +/* + * MAX_RCV_CTX : The number of receive contexts that are available on + * the phantom. + */ +#define MAX_RCV_CTX 1 + +#define NETXEN_SRE_INT_STATUS (NETXEN_CRB_SRE + 0x00034) +#define NETXEN_SRE_PBI_ACTIVE_STATUS (NETXEN_CRB_SRE + 0x01014) +#define NETXEN_SRE_L1RE_CTL (NETXEN_CRB_SRE + 0x03000) +#define NETXEN_SRE_L2RE_CTL (NETXEN_CRB_SRE + 0x05000) +#define NETXEN_SRE_BUF_CTL (NETXEN_CRB_SRE + 0x01000) + +#define NETXEN_DMA_BASE(U) (NETXEN_CRB_PCIX_MD + 0x20000 + ((U)<<16)) +#define NETXEN_DMA_COMMAND(U) (NETXEN_DMA_BASE(U) + 0x00008) + +#define NETXEN_I2Q_CLR_PCI_HI (NETXEN_CRB_I2Q + 0x00034) + +#define PEG_NETWORK_BASE(N) (NETXEN_CRB_PEG_NET_0 + (((N)&3) << 20)) +#define CRB_REG_EX_PC 0x3c + +#define ROMUSB_GLB (NETXEN_CRB_ROMUSB + 0x00000) +#define ROMUSB_ROM (NETXEN_CRB_ROMUSB + 0x10000) + +#define NETXEN_ROMUSB_GLB_STATUS (ROMUSB_GLB + 0x0004) +#define NETXEN_ROMUSB_GLB_SW_RESET (ROMUSB_GLB + 0x0008) +#define NETXEN_ROMUSB_GLB_PAD_GPIO_I (ROMUSB_GLB + 0x000c) +#define NETXEN_ROMUSB_GLB_CAS_RST (ROMUSB_GLB + 0x0038) +#define NETXEN_ROMUSB_GLB_TEST_MUX_SEL (ROMUSB_GLB + 0x0044) +#define NETXEN_ROMUSB_GLB_PEGTUNE_DONE (ROMUSB_GLB + 0x005c) +#define NETXEN_ROMUSB_GLB_CHIP_CLK_CTRL (ROMUSB_GLB + 0x00A8) + +#define NETXEN_ROMUSB_GPIO(n) (ROMUSB_GLB + 0x60 + (4 * (n))) + +#define NETXEN_ROMUSB_ROM_INSTR_OPCODE (ROMUSB_ROM + 0x0004) +#define NETXEN_ROMUSB_ROM_ADDRESS (ROMUSB_ROM + 0x0008) +#define NETXEN_ROMUSB_ROM_WDATA (ROMUSB_ROM + 0x000c) +#define NETXEN_ROMUSB_ROM_ABYTE_CNT (ROMUSB_ROM + 0x0010) +#define NETXEN_ROMUSB_ROM_DUMMY_BYTE_CNT (ROMUSB_ROM + 0x0014) +#define NETXEN_ROMUSB_ROM_RDATA (ROMUSB_ROM + 0x0018) + +/* Lock IDs for ROM lock */ +#define ROM_LOCK_DRIVER 0x0d417340 + +/****************************************************************************** +* +* Definitions specific to M25P flash +* +******************************************************************************* +* Instructions +*/ +#define M25P_INSTR_WREN 0x06 +#define M25P_INSTR_WRDI 0x04 +#define M25P_INSTR_RDID 0x9f +#define M25P_INSTR_RDSR 0x05 +#define M25P_INSTR_WRSR 0x01 +#define M25P_INSTR_READ 0x03 +#define M25P_INSTR_FAST_READ 0x0b +#define M25P_INSTR_PP 0x02 +#define M25P_INSTR_SE 0xd8 +#define M25P_INSTR_BE 0xc7 +#define M25P_INSTR_DP 0xb9 +#define M25P_INSTR_RES 0xab + +/* all are 1MB windows */ + +#define NETXEN_PCI_CRB_WINDOWSIZE 0x00100000 +#define NETXEN_PCI_CRB_WINDOW(A) \ + (NETXEN_PCI_CRBSPACE + (A)*NETXEN_PCI_CRB_WINDOWSIZE) + +#define NETXEN_CRB_NIU NETXEN_PCI_CRB_WINDOW(NETXEN_HW_PX_MAP_CRB_NIU) +#define NETXEN_CRB_SRE NETXEN_PCI_CRB_WINDOW(NETXEN_HW_PX_MAP_CRB_SRE) +#define NETXEN_CRB_ROMUSB \ + NETXEN_PCI_CRB_WINDOW(NETXEN_HW_PX_MAP_CRB_ROMUSB) +#define NETXEN_CRB_I2Q NETXEN_PCI_CRB_WINDOW(NETXEN_HW_PX_MAP_CRB_I2Q) +#define NETXEN_CRB_MAX NETXEN_PCI_CRB_WINDOW(64) + +#define NETXEN_CRB_PCIX_HOST NETXEN_PCI_CRB_WINDOW(NETXEN_HW_PX_MAP_CRB_PH) +#define NETXEN_CRB_PCIX_HOST2 NETXEN_PCI_CRB_WINDOW(NETXEN_HW_PX_MAP_CRB_PH2) +#define NETXEN_CRB_PEG_NET_0 NETXEN_PCI_CRB_WINDOW(NETXEN_HW_PX_MAP_CRB_PGN0) +#define NETXEN_CRB_PEG_NET_1 NETXEN_PCI_CRB_WINDOW(NETXEN_HW_PX_MAP_CRB_PGN1) +#define NETXEN_CRB_PEG_NET_2 NETXEN_PCI_CRB_WINDOW(NETXEN_HW_PX_MAP_CRB_PGN2) +#define NETXEN_CRB_PEG_NET_3 NETXEN_PCI_CRB_WINDOW(NETXEN_HW_PX_MAP_CRB_PGN3) +#define NETXEN_CRB_PEG_NET_D NETXEN_PCI_CRB_WINDOW(NETXEN_HW_PX_MAP_CRB_PGND) +#define NETXEN_CRB_PEG_NET_I NETXEN_PCI_CRB_WINDOW(NETXEN_HW_PX_MAP_CRB_PGNI) +#define NETXEN_CRB_DDR_NET NETXEN_PCI_CRB_WINDOW(NETXEN_HW_PX_MAP_CRB_MN) + +#define NETXEN_CRB_PCIX_MD NETXEN_PCI_CRB_WINDOW(NETXEN_HW_PX_MAP_CRB_PS) +#define NETXEN_CRB_PCIE NETXEN_CRB_PCIX_MD + +#define ISR_INT_VECTOR (NETXEN_PCIX_PS_REG(PCIX_INT_VECTOR)) +#define ISR_INT_MASK (NETXEN_PCIX_PS_REG(PCIX_INT_MASK)) +#define ISR_INT_MASK_SLOW (NETXEN_PCIX_PS_REG(PCIX_INT_MASK)) +#define ISR_INT_TARGET_STATUS (NETXEN_PCIX_PS_REG(PCIX_TARGET_STATUS)) +#define ISR_INT_TARGET_MASK (NETXEN_PCIX_PS_REG(PCIX_TARGET_MASK)) + +#define NETXEN_PCI_MAPSIZE 128 +#define NETXEN_PCI_DDR_NET (0x00000000UL) +#define NETXEN_PCI_QDR_NET (0x04000000UL) +#define NETXEN_PCI_DIRECT_CRB (0x04400000UL) +#define NETXEN_PCI_CAMQM_MAX (0x04ffffffUL) +#define NETXEN_PCI_OCM0 (0x05000000UL) +#define NETXEN_PCI_OCM0_MAX (0x050fffffUL) +#define NETXEN_PCI_OCM1 (0x05100000UL) +#define NETXEN_PCI_OCM1_MAX (0x051fffffUL) +#define NETXEN_PCI_CRBSPACE (0x06000000UL) + +#define NETXEN_CRB_CAM NETXEN_PCI_CRB_WINDOW(NETXEN_HW_PX_MAP_CRB_CAM) + +#define NETXEN_ADDR_DDR_NET (0x0000000000000000ULL) +#define NETXEN_ADDR_DDR_NET_MAX (0x000000000fffffffULL) +#define NETXEN_ADDR_OCM0 (0x0000000200000000ULL) +#define NETXEN_ADDR_OCM0_MAX (0x00000002000fffffULL) +#define NETXEN_ADDR_OCM1 (0x0000000200400000ULL) +#define NETXEN_ADDR_OCM1_MAX (0x00000002004fffffULL) +#define NETXEN_ADDR_QDR_NET (0x0000000300000000ULL) +#define NETXEN_ADDR_QDR_NET_MAX (0x00000003003fffffULL) + + /* 200ms delay in each loop */ +#define NETXEN_NIU_PHY_WAITLEN 200000 + /* 10 seconds before we give up */ +#define NETXEN_NIU_PHY_WAITMAX 50 +#define NETXEN_NIU_MAX_GBE_PORTS 4 + +#define NETXEN_NIU_MODE (NETXEN_CRB_NIU + 0x00000) + +#define NETXEN_NIU_XG_SINGLE_TERM (NETXEN_CRB_NIU + 0x00004) +#define NETXEN_NIU_XG_DRIVE_HI (NETXEN_CRB_NIU + 0x00008) +#define NETXEN_NIU_XG_DRIVE_LO (NETXEN_CRB_NIU + 0x0000c) +#define NETXEN_NIU_XG_DTX (NETXEN_CRB_NIU + 0x00010) +#define NETXEN_NIU_XG_DEQ (NETXEN_CRB_NIU + 0x00014) +#define NETXEN_NIU_XG_WORD_ALIGN (NETXEN_CRB_NIU + 0x00018) +#define NETXEN_NIU_XG_RESET (NETXEN_CRB_NIU + 0x0001c) +#define NETXEN_NIU_XG_POWER_DOWN (NETXEN_CRB_NIU + 0x00020) +#define NETXEN_NIU_XG_RESET_PLL (NETXEN_CRB_NIU + 0x00024) +#define NETXEN_NIU_XG_SERDES_LOOPBACK (NETXEN_CRB_NIU + 0x00028) +#define NETXEN_NIU_XG_DO_BYTE_ALIGN (NETXEN_CRB_NIU + 0x0002c) +#define NETXEN_NIU_XG_TX_ENABLE (NETXEN_CRB_NIU + 0x00030) +#define NETXEN_NIU_XG_RX_ENABLE (NETXEN_CRB_NIU + 0x00034) +#define NETXEN_NIU_XG_STATUS (NETXEN_CRB_NIU + 0x00038) +#define NETXEN_NIU_XG_PAUSE_THRESHOLD (NETXEN_CRB_NIU + 0x0003c) +#define NETXEN_NIU_INT_MASK (NETXEN_CRB_NIU + 0x00040) +#define NETXEN_NIU_ACTIVE_INT (NETXEN_CRB_NIU + 0x00044) +#define NETXEN_NIU_MASKABLE_INT (NETXEN_CRB_NIU + 0x00048) + +#define NETXEN_NIU_STRAP_VALUE_SAVE_HIGHER (NETXEN_CRB_NIU + 0x0004c) + +#define NETXEN_NIU_GB_SERDES_RESET (NETXEN_CRB_NIU + 0x00050) +#define NETXEN_NIU_GB0_GMII_MODE (NETXEN_CRB_NIU + 0x00054) +#define NETXEN_NIU_GB0_MII_MODE (NETXEN_CRB_NIU + 0x00058) +#define NETXEN_NIU_GB1_GMII_MODE (NETXEN_CRB_NIU + 0x0005c) +#define NETXEN_NIU_GB1_MII_MODE (NETXEN_CRB_NIU + 0x00060) +#define NETXEN_NIU_GB2_GMII_MODE (NETXEN_CRB_NIU + 0x00064) +#define NETXEN_NIU_GB2_MII_MODE (NETXEN_CRB_NIU + 0x00068) +#define NETXEN_NIU_GB3_GMII_MODE (NETXEN_CRB_NIU + 0x0006c) +#define NETXEN_NIU_GB3_MII_MODE (NETXEN_CRB_NIU + 0x00070) +#define NETXEN_NIU_REMOTE_LOOPBACK (NETXEN_CRB_NIU + 0x00074) +#define NETXEN_NIU_GB0_HALF_DUPLEX (NETXEN_CRB_NIU + 0x00078) +#define NETXEN_NIU_GB1_HALF_DUPLEX (NETXEN_CRB_NIU + 0x0007c) +#define NETXEN_NIU_RESET_SYS_FIFOS (NETXEN_CRB_NIU + 0x00088) +#define NETXEN_NIU_GB_CRC_DROP (NETXEN_CRB_NIU + 0x0008c) +#define NETXEN_NIU_GB_DROP_WRONGADDR (NETXEN_CRB_NIU + 0x00090) +#define NETXEN_NIU_TEST_MUX_CTL (NETXEN_CRB_NIU + 0x00094) +#define NETXEN_NIU_XG_PAUSE_CTL (NETXEN_CRB_NIU + 0x00098) +#define NETXEN_NIU_XG_PAUSE_LEVEL (NETXEN_CRB_NIU + 0x000dc) +#define NETXEN_NIU_XG_SEL (NETXEN_CRB_NIU + 0x00128) + +#define NETXEN_NIU_FULL_LEVEL_XG (NETXEN_CRB_NIU + 0x00450) + +#define NETXEN_NIU_XG1_RESET (NETXEN_CRB_NIU + 0x0011c) +#define NETXEN_NIU_XG1_POWER_DOWN (NETXEN_CRB_NIU + 0x00120) +#define NETXEN_NIU_XG1_RESET_PLL (NETXEN_CRB_NIU + 0x00124) + +#define NETXEN_MAC_ADDR_CNTL_REG (NETXEN_CRB_NIU + 0x1000) + +#define NETXEN_MULTICAST_ADDR_HI_0 (NETXEN_CRB_NIU + 0x1010) +#define NETXEN_MULTICAST_ADDR_HI_1 (NETXEN_CRB_NIU + 0x1014) +#define NETXEN_MULTICAST_ADDR_HI_2 (NETXEN_CRB_NIU + 0x1018) +#define NETXEN_MULTICAST_ADDR_HI_3 (NETXEN_CRB_NIU + 0x101c) + +#define NETXEN_NIU_GB_MAC_CONFIG_0(I) \ + (NETXEN_CRB_NIU + 0x30000 + (I)*0x10000) +#define NETXEN_NIU_GB_MAC_CONFIG_1(I) \ + (NETXEN_CRB_NIU + 0x30004 + (I)*0x10000) +#define NETXEN_NIU_GB_MAC_IPG_IFG(I) \ + (NETXEN_CRB_NIU + 0x30008 + (I)*0x10000) +#define NETXEN_NIU_GB_HALF_DUPLEX_CTRL(I) \ + (NETXEN_CRB_NIU + 0x3000c + (I)*0x10000) +#define NETXEN_NIU_GB_MAX_FRAME_SIZE(I) \ + (NETXEN_CRB_NIU + 0x30010 + (I)*0x10000) +#define NETXEN_NIU_GB_TEST_REG(I) \ + (NETXEN_CRB_NIU + 0x3001c + (I)*0x10000) +#define NETXEN_NIU_GB_MII_MGMT_CONFIG(I) \ + (NETXEN_CRB_NIU + 0x30020 + (I)*0x10000) +#define NETXEN_NIU_GB_MII_MGMT_COMMAND(I) \ + (NETXEN_CRB_NIU + 0x30024 + (I)*0x10000) +#define NETXEN_NIU_GB_MII_MGMT_ADDR(I) \ + (NETXEN_CRB_NIU + 0x30028 + (I)*0x10000) +#define NETXEN_NIU_GB_MII_MGMT_CTRL(I) \ + (NETXEN_CRB_NIU + 0x3002c + (I)*0x10000) +#define NETXEN_NIU_GB_MII_MGMT_STATUS(I) \ + (NETXEN_CRB_NIU + 0x30030 + (I)*0x10000) +#define NETXEN_NIU_GB_MII_MGMT_INDICATE(I) \ + (NETXEN_CRB_NIU + 0x30034 + (I)*0x10000) +#define NETXEN_NIU_GB_INTERFACE_CTRL(I) \ + (NETXEN_CRB_NIU + 0x30038 + (I)*0x10000) +#define NETXEN_NIU_GB_INTERFACE_STATUS(I) \ + (NETXEN_CRB_NIU + 0x3003c + (I)*0x10000) +#define NETXEN_NIU_GB_STATION_ADDR_0(I) \ + (NETXEN_CRB_NIU + 0x30040 + (I)*0x10000) +#define NETXEN_NIU_GB_STATION_ADDR_1(I) \ + (NETXEN_CRB_NIU + 0x30044 + (I)*0x10000) + +#define NETXEN_NIU_XGE_CONFIG_0 (NETXEN_CRB_NIU + 0x70000) +#define NETXEN_NIU_XGE_CONFIG_1 (NETXEN_CRB_NIU + 0x70004) +#define NETXEN_NIU_XGE_IPG (NETXEN_CRB_NIU + 0x70008) +#define NETXEN_NIU_XGE_STATION_ADDR_0_HI (NETXEN_CRB_NIU + 0x7000c) +#define NETXEN_NIU_XGE_STATION_ADDR_0_1 (NETXEN_CRB_NIU + 0x70010) +#define NETXEN_NIU_XGE_STATION_ADDR_1_LO (NETXEN_CRB_NIU + 0x70014) +#define NETXEN_NIU_XGE_STATUS (NETXEN_CRB_NIU + 0x70018) +#define NETXEN_NIU_XGE_MAX_FRAME_SIZE (NETXEN_CRB_NIU + 0x7001c) +#define NETXEN_NIU_XGE_PAUSE_FRAME_VALUE (NETXEN_CRB_NIU + 0x70020) +#define NETXEN_NIU_XGE_TX_BYTE_CNT (NETXEN_CRB_NIU + 0x70024) +#define NETXEN_NIU_XGE_TX_FRAME_CNT (NETXEN_CRB_NIU + 0x70028) +#define NETXEN_NIU_XGE_RX_BYTE_CNT (NETXEN_CRB_NIU + 0x7002c) +#define NETXEN_NIU_XGE_RX_FRAME_CNT (NETXEN_CRB_NIU + 0x70030) +#define NETXEN_NIU_XGE_AGGR_ERROR_CNT (NETXEN_CRB_NIU + 0x70034) +#define NETXEN_NIU_XGE_MULTICAST_FRAME_CNT (NETXEN_CRB_NIU + 0x70038) +#define NETXEN_NIU_XGE_UNICAST_FRAME_CNT (NETXEN_CRB_NIU + 0x7003c) +#define NETXEN_NIU_XGE_CRC_ERROR_CNT (NETXEN_CRB_NIU + 0x70040) +#define NETXEN_NIU_XGE_OVERSIZE_FRAME_ERR (NETXEN_CRB_NIU + 0x70044) +#define NETXEN_NIU_XGE_UNDERSIZE_FRAME_ERR (NETXEN_CRB_NIU + 0x70048) +#define NETXEN_NIU_XGE_LOCAL_ERROR_CNT (NETXEN_CRB_NIU + 0x7004c) +#define NETXEN_NIU_XGE_REMOTE_ERROR_CNT (NETXEN_CRB_NIU + 0x70050) +#define NETXEN_NIU_XGE_CONTROL_CHAR_CNT (NETXEN_CRB_NIU + 0x70054) +#define NETXEN_NIU_XGE_PAUSE_FRAME_CNT (NETXEN_CRB_NIU + 0x70058) +#define NETXEN_NIU_XG1_CONFIG_0 (NETXEN_CRB_NIU + 0x80000) +#define NETXEN_NIU_XG1_CONFIG_1 (NETXEN_CRB_NIU + 0x80004) +#define NETXEN_NIU_XG1_IPG (NETXEN_CRB_NIU + 0x80008) +#define NETXEN_NIU_XG1_STATION_ADDR_0_HI (NETXEN_CRB_NIU + 0x8000c) +#define NETXEN_NIU_XG1_STATION_ADDR_0_1 (NETXEN_CRB_NIU + 0x80010) +#define NETXEN_NIU_XG1_STATION_ADDR_1_LO (NETXEN_CRB_NIU + 0x80014) +#define NETXEN_NIU_XG1_STATUS (NETXEN_CRB_NIU + 0x80018) +#define NETXEN_NIU_XG1_MAX_FRAME_SIZE (NETXEN_CRB_NIU + 0x8001c) +#define NETXEN_NIU_XG1_PAUSE_FRAME_VALUE (NETXEN_CRB_NIU + 0x80020) +#define NETXEN_NIU_XG1_TX_BYTE_CNT (NETXEN_CRB_NIU + 0x80024) +#define NETXEN_NIU_XG1_TX_FRAME_CNT (NETXEN_CRB_NIU + 0x80028) +#define NETXEN_NIU_XG1_RX_BYTE_CNT (NETXEN_CRB_NIU + 0x8002c) +#define NETXEN_NIU_XG1_RX_FRAME_CNT (NETXEN_CRB_NIU + 0x80030) +#define NETXEN_NIU_XG1_AGGR_ERROR_CNT (NETXEN_CRB_NIU + 0x80034) +#define NETXEN_NIU_XG1_MULTICAST_FRAME_CNT (NETXEN_CRB_NIU + 0x80038) +#define NETXEN_NIU_XG1_UNICAST_FRAME_CNT (NETXEN_CRB_NIU + 0x8003c) +#define NETXEN_NIU_XG1_CRC_ERROR_CNT (NETXEN_CRB_NIU + 0x80040) +#define NETXEN_NIU_XG1_OVERSIZE_FRAME_ERR (NETXEN_CRB_NIU + 0x80044) +#define NETXEN_NIU_XG1_UNDERSIZE_FRAME_ERR (NETXEN_CRB_NIU + 0x80048) +#define NETXEN_NIU_XG1_LOCAL_ERROR_CNT (NETXEN_CRB_NIU + 0x8004c) +#define NETXEN_NIU_XG1_REMOTE_ERROR_CNT (NETXEN_CRB_NIU + 0x80050) +#define NETXEN_NIU_XG1_CONTROL_CHAR_CNT (NETXEN_CRB_NIU + 0x80054) +#define NETXEN_NIU_XG1_PAUSE_FRAME_CNT (NETXEN_CRB_NIU + 0x80058) + +/* XG Link status */ +#define XG_LINK_UP 0x10 +#define XG_LINK_DOWN 0x20 + +#define NETXEN_CAM_RAM_BASE (NETXEN_CRB_CAM + 0x02000) +#define NETXEN_CAM_RAM(reg) (NETXEN_CAM_RAM_BASE + (reg)) +#define NETXEN_FW_VERSION_MAJOR (NETXEN_CAM_RAM(0x150)) +#define NETXEN_FW_VERSION_MINOR (NETXEN_CAM_RAM(0x154)) +#define NETXEN_FW_VERSION_SUB (NETXEN_CAM_RAM(0x158)) +#define NETXEN_ROM_LOCK_ID (NETXEN_CAM_RAM(0x100)) + +#define NETXEN_PHY_LOCK_ID (NETXEN_CAM_RAM(0x120)) + +/* Lock IDs for PHY lock */ +#define PHY_LOCK_DRIVER 0x44524956 + +/* Used for PS PCI Memory access */ +#define PCIX_PS_OP_ADDR_LO (0x10000) +/* via CRB (PS side only) */ +#define PCIX_PS_OP_ADDR_HI (0x10004) + +#define PCIX_INT_VECTOR (0x10100) +#define PCIX_INT_MASK (0x10104) + +#define PCIX_MN_WINDOW (0x10200) +#define PCIX_MS_WINDOW (0x10204) +#define PCIX_SN_WINDOW (0x10208) +#define PCIX_CRB_WINDOW (0x10210) + +#define PCIX_TARGET_STATUS (0x10118) +#define PCIX_TARGET_MASK (0x10128) + +#define PCIX_MSI_F0 (0x13000) + +#define PCIX_PS_MEM_SPACE (0x90000) + +#define NETXEN_PCIX_PH_REG(reg) (NETXEN_CRB_PCIE + (reg)) +#define NETXEN_PCIX_PS_REG(reg) (NETXEN_CRB_PCIX_MD + (reg)) + +#define NETXEN_PCIE_REG(reg) (NETXEN_CRB_PCIE + (reg)) + +#define PCIE_MAX_DMA_XFER_SIZE (0x1404c) + +#define PCIE_DCR 0x00d8 + +#define PCIE_SEM2_LOCK (0x1c010) /* Flash lock */ +#define PCIE_SEM2_UNLOCK (0x1c014) /* Flash unlock */ +#define PCIE_SEM3_LOCK (0x1c018) /* Phy lock */ +#define PCIE_SEM3_UNLOCK (0x1c01c) /* Phy unlock */ + +#define PCIE_TGT_SPLIT_CHICKEN (0x12080) + +#define PCIE_MAX_MASTER_SPLIT (0x14048) + +#endif /* __NETXEN_NIC_HDR_H_ */ diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c new file mode 100644 index 00000000000..105c24f0ad4 --- /dev/null +++ b/drivers/net/netxen/netxen_nic_hw.c @@ -0,0 +1,1010 @@ +/* + * Copyright (C) 2003 - 2006 NetXen, Inc. + * All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, + * MA 02111-1307, USA. + * + * The full GNU General Public License is included in this distribution + * in the file called LICENSE. + * + * Contact Information: + * info@netxen.com + * NetXen, + * 3965 Freedom Circle, Fourth floor, + * Santa Clara, CA 95054 + * + * + * Source file for NIC routines to access the Phantom hardware + * + */ + +#include "netxen_nic.h" +#include "netxen_nic_hw.h" +#include "netxen_nic_phan_reg.h" + +/* PCI Windowing for DDR regions. */ + +#define ADDR_IN_RANGE(addr, low, high) \ + (((addr) <= (high)) && ((addr) >= (low))) + +#define NETXEN_FLASH_BASE (BOOTLD_START) +#define NETXEN_PHANTOM_MEM_BASE (NETXEN_FLASH_BASE) +#define NETXEN_MAX_MTU 8000 +#define NETXEN_MIN_MTU 64 +#define NETXEN_ETH_FCS_SIZE 4 +#define NETXEN_ENET_HEADER_SIZE 14 +#define NETXEN_WINDOW_ONE 0x2000000 /*CRB Window: bit 25 of CRB address */ +#define NETXEN_FIRMWARE_LEN ((16 * 1024) / 4) +#define NETXEN_NIU_HDRSIZE (0x1 << 6) +#define NETXEN_NIU_TLRSIZE (0x1 << 5) + +#define lower32(x) ((u32)((x) & 0xffffffff)) +#define upper32(x) \ + ((u32)(((unsigned long long)(x) >> 32) & 0xffffffff)) + +#define NETXEN_NIC_ZERO_PAUSE_ADDR 0ULL +#define NETXEN_NIC_UNIT_PAUSE_ADDR 0x200ULL +#define NETXEN_NIC_EPG_PAUSE_ADDR1 0x2200010000c28001ULL +#define NETXEN_NIC_EPG_PAUSE_ADDR2 0x0100088866554433ULL + +#define NETXEN_NIC_WINDOW_MARGIN 0x100000 + +unsigned long netxen_nic_pci_set_window(struct netxen_adapter *adapter, + unsigned long long addr); +void netxen_free_hw_resources(struct netxen_adapter *adapter); + +int netxen_nic_set_mac(struct net_device *netdev, void *p) +{ + struct netxen_port *port = netdev_priv(netdev); + struct netxen_adapter *adapter = port->adapter; + struct sockaddr *addr = p; + + if (netif_running(netdev)) + return -EBUSY; + + if (!is_valid_ether_addr(addr->sa_data)) + return -EADDRNOTAVAIL; + + DPRINTK(INFO, "valid ether addr\n"); + memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len); + + if (adapter->ops->macaddr_set) + adapter->ops->macaddr_set(port, addr->sa_data); + + return 0; +} + +/* + * netxen_nic_set_multi - Multicast + */ +void netxen_nic_set_multi(struct net_device *netdev) +{ + struct netxen_port *port = netdev_priv(netdev); + struct netxen_adapter *adapter = port->adapter; + struct dev_mc_list *mc_ptr; + __le32 netxen_mac_addr_cntl_data = 0; + + mc_ptr = netdev->mc_list; + if (netdev->flags & IFF_PROMISC) { + if (adapter->ops->set_promisc) + adapter->ops->set_promisc(adapter, + port->portnum, + NETXEN_NIU_PROMISC_MODE); + } else { + if (adapter->ops->unset_promisc && + adapter->ahw.boardcfg.board_type + != NETXEN_BRDTYPE_P2_SB31_10G_IMEZ) + adapter->ops->unset_promisc(adapter, + port->portnum, + NETXEN_NIU_NON_PROMISC_MODE); + } + if (adapter->ahw.board_type == NETXEN_NIC_XGBE) { + netxen_nic_mcr_set_mode_select(netxen_mac_addr_cntl_data, 0x03); + netxen_nic_mcr_set_id_pool0(netxen_mac_addr_cntl_data, 0x00); + netxen_nic_mcr_set_id_pool1(netxen_mac_addr_cntl_data, 0x00); + netxen_nic_mcr_set_id_pool2(netxen_mac_addr_cntl_data, 0x00); + netxen_nic_mcr_set_id_pool3(netxen_mac_addr_cntl_data, 0x00); + netxen_nic_mcr_set_enable_xtnd0(netxen_mac_addr_cntl_data); + netxen_nic_mcr_set_enable_xtnd1(netxen_mac_addr_cntl_data); + netxen_nic_mcr_set_enable_xtnd2(netxen_mac_addr_cntl_data); + netxen_nic_mcr_set_enable_xtnd3(netxen_mac_addr_cntl_data); + } else { + netxen_nic_mcr_set_mode_select(netxen_mac_addr_cntl_data, 0x00); + netxen_nic_mcr_set_id_pool0(netxen_mac_addr_cntl_data, 0x00); + netxen_nic_mcr_set_id_pool1(netxen_mac_addr_cntl_data, 0x01); + netxen_nic_mcr_set_id_pool2(netxen_mac_addr_cntl_data, 0x02); + netxen_nic_mcr_set_id_pool3(netxen_mac_addr_cntl_data, 0x03); + } + writel(netxen_mac_addr_cntl_data, + NETXEN_CRB_NORMALIZE(adapter, NETXEN_MAC_ADDR_CNTL_REG)); + if (adapter->ahw.board_type == NETXEN_NIC_XGBE) { + writel(netxen_mac_addr_cntl_data, + NETXEN_CRB_NORMALIZE(adapter, + NETXEN_MULTICAST_ADDR_HI_0)); + } else { + writel(netxen_mac_addr_cntl_data, + NETXEN_CRB_NORMALIZE(adapter, + NETXEN_MULTICAST_ADDR_HI_1)); + } + netxen_mac_addr_cntl_data = 0; + writel(netxen_mac_addr_cntl_data, + NETXEN_CRB_NORMALIZE(adapter, NETXEN_NIU_GB_DROP_WRONGADDR)); +} + +/* + * netxen_nic_change_mtu - Change the Maximum Transfer Unit + * @returns 0 on success, negative on failure + */ +int netxen_nic_change_mtu(struct net_device *netdev, int mtu) +{ + struct netxen_port *port = netdev_priv(netdev); + struct netxen_adapter *adapter = port->adapter; + int eff_mtu = mtu + NETXEN_ENET_HEADER_SIZE + NETXEN_ETH_FCS_SIZE; + + if ((eff_mtu > NETXEN_MAX_MTU) || (eff_mtu < NETXEN_MIN_MTU)) { + printk(KERN_ERR "%s: %s %d is not supported.\n", + netxen_nic_driver_name, netdev->name, mtu); + return -EINVAL; + } + + if (adapter->ops->set_mtu) + adapter->ops->set_mtu(port, mtu); + netdev->mtu = mtu; + + return 0; +} + +/* + * check if the firmware has been downloaded and ready to run and + * setup the address for the descriptors in the adapter + */ +int netxen_nic_hw_resources(struct netxen_adapter *adapter) +{ + struct netxen_hardware_context *hw = &adapter->ahw; + u32 state = 0; + void *addr; + void *pause_addr; + int loops = 0, err = 0; + int ctx, ring; + u32 card_cmdring = 0; + struct netxen_rcv_desc_crb *rcv_desc_crb = NULL; + struct netxen_recv_context *recv_ctx; + struct netxen_rcv_desc_ctx *rcv_desc; + + DPRINTK(INFO, "crb_base: %lx %lx", NETXEN_PCI_CRBSPACE, + PCI_OFFSET_SECOND_RANGE(adapter, NETXEN_PCI_CRBSPACE)); + DPRINTK(INFO, "cam base: %lx %lx", NETXEN_CRB_CAM, + pci_base_offset(adapter, NETXEN_CRB_CAM)); + DPRINTK(INFO, "cam RAM: %lx %lx", NETXEN_CAM_RAM_BASE, + pci_base_offset(adapter, NETXEN_CAM_RAM_BASE)); + DPRINTK(INFO, "NIC base:%lx %lx\n", NIC_CRB_BASE_PORT1, + pci_base_offset(adapter, NIC_CRB_BASE_PORT1)); + + /* Window 1 call */ + card_cmdring = readl(NETXEN_CRB_NORMALIZE(adapter, CRB_CMDPEG_CMDRING)); + + DPRINTK(INFO, "Command Peg sends 0x%x for cmdring base\n", + card_cmdring); + + for (ctx = 0; ctx < MAX_RCV_CTX; ++ctx) { + DPRINTK(INFO, "Command Peg ready..waiting for rcv peg\n"); + loops = 0; + state = 0; + /* Window 1 call */ + state = readl(NETXEN_CRB_NORMALIZE(adapter, + recv_crb_registers[ctx]. + crb_rcvpeg_state)); + while (state != PHAN_PEG_RCV_INITIALIZED && loops < 20) { + udelay(100); + /* Window 1 call */ + state = readl(NETXEN_CRB_NORMALIZE(adapter, + recv_crb_registers + [ctx]. + crb_rcvpeg_state)); + loops++; + } + if (loops >= 20) { + printk(KERN_ERR "Rcv Peg initialization not complete:" + "%x.\n", state); + err = -EIO; + return err; + } + } + DPRINTK(INFO, "Recieve Peg ready too. starting stuff\n"); + + addr = netxen_alloc(adapter->ahw.pdev, + sizeof(struct cmd_desc_type0) * + adapter->max_tx_desc_count, + &hw->cmd_desc_phys_addr, &hw->cmd_desc_pdev); + + if (addr == NULL) { + DPRINTK(ERR, "bad return from pci_alloc_consistent\n"); + return -ENOMEM; + } + + pause_addr = netxen_alloc(adapter->ahw.pdev, 512, + (dma_addr_t *) & hw->pause_physaddr, + &hw->pause_pdev); + if (pause_addr == NULL) { + DPRINTK(1, ERR, "bad return from pci_alloc_consistent\n"); + return -ENOMEM; + } + + hw->pauseaddr = (char *)pause_addr; + { + u64 *ptr = (u64 *) pause_addr; + *ptr++ = NETXEN_NIC_ZERO_PAUSE_ADDR; + *ptr++ = NETXEN_NIC_ZERO_PAUSE_ADDR; + *ptr++ = NETXEN_NIC_UNIT_PAUSE_ADDR; + *ptr++ = NETXEN_NIC_ZERO_PAUSE_ADDR; + *ptr++ = NETXEN_NIC_EPG_PAUSE_ADDR1; + *ptr++ = NETXEN_NIC_EPG_PAUSE_ADDR2; + } + + hw->cmd_desc_head = (struct cmd_desc_type0 *)addr; + + for (ctx = 0; ctx < MAX_RCV_CTX; ++ctx) { + recv_ctx = &adapter->recv_ctx[ctx]; + + for (ring = 0; ring < NUM_RCV_DESC_RINGS; ring++) { + rcv_desc = &recv_ctx->rcv_desc[ring]; + addr = netxen_alloc(adapter->ahw.pdev, + RCV_DESC_RINGSIZE, + &rcv_desc->phys_addr, + &rcv_desc->phys_pdev); + if (addr == NULL) { + DPRINTK(ERR, "bad return from " + "pci_alloc_consistent\n"); + netxen_free_hw_resources(adapter); + err = -ENOMEM; + return err; + } + rcv_desc->desc_head = (struct rcv_desc *)addr; + } + + addr = netxen_alloc(adapter->ahw.pdev, STATUS_DESC_RINGSIZE, + &recv_ctx->rcv_status_desc_phys_addr, + &recv_ctx->rcv_status_desc_pdev); + if (addr == NULL) { + DPRINTK(ERR, "bad return from" + " pci_alloc_consistent\n"); + netxen_free_hw_resources(adapter); + err = -ENOMEM; + return err; + } + recv_ctx->rcv_status_desc_head = (struct status_desc *)addr; + for (ring = 0; ring < NUM_RCV_DESC_RINGS; ring++) { + rcv_desc = &recv_ctx->rcv_desc[ring]; + rcv_desc_crb = + &recv_crb_registers[ctx].rcv_desc_crb[ring]; + DPRINTK(INFO, "ring #%d crb global ring reg 0x%x\n", + ring, rcv_desc_crb->crb_globalrcv_ring); + /* Window = 1 */ + writel(lower32(rcv_desc->phys_addr), + NETXEN_CRB_NORMALIZE(adapter, + rcv_desc_crb-> + crb_globalrcv_ring)); + DPRINTK(INFO, "GLOBAL_RCV_RING ctx %d, addr 0x%x" + " val 0x%llx," + " virt %p\n", ctx, + rcv_desc_crb->crb_globalrcv_ring, + (unsigned long long)rcv_desc->phys_addr, + +rcv_desc->desc_head); + } + + /* Window = 1 */ + writel(lower32(recv_ctx->rcv_status_desc_phys_addr), + NETXEN_CRB_NORMALIZE(adapter, + recv_crb_registers[ctx]. + crb_rcvstatus_ring)); + DPRINTK(INFO, "RCVSTATUS_RING, ctx %d, addr 0x%x," + " val 0x%x,virt%p\n", + ctx, + recv_crb_registers[ctx].crb_rcvstatus_ring, + (unsigned long long)recv_ctx->rcv_status_desc_phys_addr, + recv_ctx->rcv_status_desc_head); + } + /* Window = 1 */ + writel(lower32(hw->pause_physaddr), + NETXEN_CRB_NORMALIZE(adapter, CRB_PAUSE_ADDR_LO)); + writel(upper32(hw->pause_physaddr), + NETXEN_CRB_NORMALIZE(adapter, CRB_PAUSE_ADDR_HI)); + + writel(lower32(hw->cmd_desc_phys_addr), + NETXEN_CRB_NORMALIZE(adapter, CRB_HOST_CMD_ADDR_LO)); + writel(upper32(hw->cmd_desc_phys_addr), + NETXEN_CRB_NORMALIZE(adapter, CRB_HOST_CMD_ADDR_HI)); + return err; +} + +void netxen_free_hw_resources(struct netxen_adapter *adapter) +{ + struct netxen_recv_context *recv_ctx; + struct netxen_rcv_desc_ctx *rcv_desc; + int ctx, ring; + + if (adapter->ahw.cmd_desc_head != NULL) { + pci_free_consistent(adapter->ahw.cmd_desc_pdev, + sizeof(struct cmd_desc_type0) * + adapter->max_tx_desc_count, + adapter->ahw.cmd_desc_head, + adapter->ahw.cmd_desc_phys_addr); + adapter->ahw.cmd_desc_head = NULL; + } + if (adapter->ahw.pauseaddr != NULL) { + pci_free_consistent(adapter->ahw.pause_pdev, 512, + adapter->ahw.pauseaddr, + adapter->ahw.pause_physaddr); + adapter->ahw.pauseaddr = NULL; + } + + for (ctx = 0; ctx < MAX_RCV_CTX; ++ctx) { + recv_ctx = &adapter->recv_ctx[ctx]; + for (ring = 0; ring < NUM_RCV_DESC_RINGS; ring++) { + rcv_desc = &recv_ctx->rcv_desc[ring]; + + if (rcv_desc->desc_head != NULL) { + pci_free_consistent(rcv_desc->phys_pdev, + RCV_DESC_RINGSIZE, + rcv_desc->desc_head, + rcv_desc->phys_addr); + rcv_desc->desc_head = NULL; + } + } + + if (recv_ctx->rcv_status_desc_head != NULL) { + pci_free_consistent(recv_ctx->rcv_status_desc_pdev, + STATUS_DESC_RINGSIZE, + recv_ctx->rcv_status_desc_head, + recv_ctx-> + rcv_status_desc_phys_addr); + recv_ctx->rcv_status_desc_head = NULL; + } + } +} + +void netxen_tso_check(struct netxen_adapter *adapter, + struct cmd_desc_type0 *desc, struct sk_buff *skb) +{ + if (desc->mss) { + desc->total_hdr_length = sizeof(struct ethhdr) + + ((skb->nh.iph)->ihl * sizeof(u32)) + + ((skb->h.th)->doff * sizeof(u32)); + desc->opcode = TX_TCP_LSO; + } else if (skb->ip_summed == CHECKSUM_COMPLETE) { + if (skb->nh.iph->protocol == IPPROTO_TCP) { + desc->opcode = TX_TCP_PKT; + } else if (skb->nh.iph->protocol == IPPROTO_UDP) { + desc->opcode = TX_UDP_PKT; + } else { + return; + } + } + adapter->stats.xmitcsummed++; + CMD_DESC_TCP_HDR_OFFSET_WRT(desc, skb->h.raw - skb->data); + desc->length_tcp_hdr = cpu_to_le32(desc->length_tcp_hdr); + desc->ip_hdr_offset = skb->nh.raw - skb->data; +} + +int netxen_is_flash_supported(struct netxen_adapter *adapter) +{ + const int locs[] = { 0, 0x4, 0x100, 0x4000, 0x4128 }; + int addr, val01, val02, i, j; + + /* if the flash size less than 4Mb, make huge war cry and die */ + for (j = 1; j < 4; j++) { + addr = j * NETXEN_NIC_WINDOW_MARGIN; + for (i = 0; i < (sizeof(locs) / sizeof(locs[0])); i++) { + if (netxen_rom_fast_read(adapter, locs[i], &val01) == 0 + && netxen_rom_fast_read(adapter, (addr + locs[i]), + &val02) == 0) { + if (val01 == val02) + return -1; + } else + return -1; + } + } + + return 0; +} + +static int netxen_get_flash_block(struct netxen_adapter *adapter, int base, + int size, u32 * buf) +{ + int i, addr; + u32 *ptr32; + + addr = base; + ptr32 = buf; + for (i = 0; i < size / sizeof(u32); i++) { + if (netxen_rom_fast_read(adapter, addr, ptr32) == -1) + return -1; + ptr32++; + addr += sizeof(u32); + } + if ((char *)buf + size > (char *)ptr32) { + u32 local; + + if (netxen_rom_fast_read(adapter, addr, &local) == -1) + return -1; + memcpy(ptr32, &local, (char *)buf + size - (char *)ptr32); + } + + return 0; +} + +int netxen_get_flash_mac_addr(struct netxen_adapter *adapter, u64 mac[]) +{ + u32 *pmac = (u32 *) & mac[0]; + + if (netxen_get_flash_block(adapter, + USER_START + + offsetof(struct netxen_new_user_info, + mac_addr), + FLASH_NUM_PORTS * sizeof(u64), pmac) == -1) { + return -1; + } + if (*mac == ~0ULL) { + if (netxen_get_flash_block(adapter, + USER_START_OLD + + offsetof(struct netxen_user_old_info, + mac_addr), + FLASH_NUM_PORTS * sizeof(u64), + pmac) == -1) + return -1; + if (*mac == ~0ULL) + return -1; + } + return 0; +} + +/* + * Changes the CRB window to the specified window. + */ +void netxen_nic_pci_change_crbwindow(struct netxen_adapter *adapter, u32 wndw) +{ + void __iomem *offset; + u32 tmp; + int count = 0; + + if (adapter->curr_window == wndw) + return; + + /* + * Move the CRB window. + * We need to write to the "direct access" region of PCI + * to avoid a race condition where the window register has + * not been successfully written across CRB before the target + * register address is received by PCI. The direct region bypasses + * the CRB bus. + */ + offset = + PCI_OFFSET_SECOND_RANGE(adapter, + NETXEN_PCIX_PH_REG(PCIX_CRB_WINDOW)); + + if (wndw & 0x1) + wndw = NETXEN_WINDOW_ONE; + + writel(wndw, offset); + + /* MUST make sure window is set before we forge on... */ + while ((tmp = readl(offset)) != wndw) { + printk(KERN_WARNING "%s: %s WARNING: CRB window value not " + "registered properly: 0x%08x.\n", + netxen_nic_driver_name, __FUNCTION__, tmp); + mdelay(1); + if (count >= 10) + break; + count++; + } + + adapter->curr_window = wndw; +} + +void netxen_load_firmware(struct netxen_adapter *adapter) +{ + int i; + long data, size = 0; + long flashaddr = NETXEN_FLASH_BASE, memaddr = NETXEN_PHANTOM_MEM_BASE; + u64 off; + void __iomem *addr; + + size = NETXEN_FIRMWARE_LEN; + writel(1, NETXEN_CRB_NORMALIZE(adapter, NETXEN_ROMUSB_GLB_CAS_RST)); + + for (i = 0; i < size; i++) { + if (netxen_rom_fast_read(adapter, flashaddr, (int *)&data) != 0) { + DPRINTK(ERR, + "Error in netxen_rom_fast_read(). Will skip" + "loading flash image\n"); + return; + } + off = netxen_nic_pci_set_window(adapter, memaddr); + addr = pci_base_offset(adapter, off); + writel(data, addr); + flashaddr += 4; + memaddr += 4; + } + udelay(100); + /* make sure Casper is powered on */ + writel(0x3fff, + NETXEN_CRB_NORMALIZE(adapter, NETXEN_ROMUSB_GLB_CHIP_CLK_CTRL)); + writel(0, NETXEN_CRB_NORMALIZE(adapter, NETXEN_ROMUSB_GLB_CAS_RST)); + + udelay(100); +} + +int +netxen_nic_hw_write_wx(struct netxen_adapter *adapter, u64 off, void *data, + int len) +{ + void __iomem *addr; + + if (ADDR_IN_WINDOW1(off)) { + addr = NETXEN_CRB_NORMALIZE(adapter, off); + } else { /* Window 0 */ + addr = pci_base_offset(adapter, off); + netxen_nic_pci_change_crbwindow(adapter, 0); + } + + DPRINTK(INFO, "writing to base %lx offset %llx addr %p" + " data %llx len %d\n", + pci_base(adapter, off), off, addr, + *(unsigned long long *)data, len); + if (!addr) { + netxen_nic_pci_change_crbwindow(adapter, 1); + return 1; + } + + switch (len) { + case 1: + writeb(*(u8 *) data, addr); + break; + case 2: + writew(*(u16 *) data, addr); + break; + case 4: + writel(*(u32 *) data, addr); + break; + case 8: + writeq(*(u64 *) data, addr); + break; + default: + DPRINTK(INFO, + "writing data %lx to offset %llx, num words=%d\n", + *(unsigned long *)data, off, (len >> 3)); + + netxen_nic_hw_block_write64((u64 __iomem *) data, addr, + (len >> 3)); + break; + } + if (!ADDR_IN_WINDOW1(off)) + netxen_nic_pci_change_crbwindow(adapter, 1); + + return 0; +} + +int +netxen_nic_hw_read_wx(struct netxen_adapter *adapter, u64 off, void *data, + int len) +{ + void __iomem *addr; + + if (ADDR_IN_WINDOW1(off)) { /* Window 1 */ + addr = NETXEN_CRB_NORMALIZE(adapter, off); + } else { /* Window 0 */ + addr = pci_base_offset(adapter, off); + netxen_nic_pci_change_crbwindow(adapter, 0); + } + + DPRINTK(INFO, "reading from base %lx offset %llx addr %p\n", + pci_base(adapter, off), off, addr); + if (!addr) { + netxen_nic_pci_change_crbwindow(adapter, 1); + return 1; + } + switch (len) { + case 1: + *(u8 *) data = readb(addr); + break; + case 2: + *(u16 *) data = readw(addr); + break; + case 4: + *(u32 *) data = readl(addr); + break; + case 8: + *(u64 *) data = readq(addr); + break; + default: + netxen_nic_hw_block_read64((u64 __iomem *) data, addr, + (len >> 3)); + break; + } + DPRINTK(INFO, "read %lx\n", *(unsigned long *)data); + + if (!ADDR_IN_WINDOW1(off)) + netxen_nic_pci_change_crbwindow(adapter, 1); + + return 0; +} + +void netxen_nic_reg_write(struct netxen_adapter *adapter, u64 off, u32 val) +{ /* Only for window 1 */ + void __iomem *addr; + + addr = NETXEN_CRB_NORMALIZE(adapter, off); + DPRINTK(INFO, "writing to base %lx offset %llx addr %p data %x\n", + pci_base(adapter, off), off, addr); + writel(val, addr); + +} + +int netxen_nic_reg_read(struct netxen_adapter *adapter, u64 off) +{ /* Only for window 1 */ + void __iomem *addr; + int val; + + addr = NETXEN_CRB_NORMALIZE(adapter, off); + DPRINTK(INFO, "reading from base %lx offset %llx addr %p\n", + adapter->ahw.pci_base, off, addr); + val = readl(addr); + writel(val, addr); + + return val; +} + +/* Change the window to 0, write and change back to window 1. */ +void netxen_nic_write_w0(struct netxen_adapter *adapter, u32 index, u32 value) +{ + void __iomem *addr; + + netxen_nic_pci_change_crbwindow(adapter, 0); + addr = pci_base_offset(adapter, index); + writel(value, addr); + netxen_nic_pci_change_crbwindow(adapter, 1); +} + +/* Change the window to 0, read and change back to window 1. */ +void netxen_nic_read_w0(struct netxen_adapter *adapter, u32 index, u32 * value) +{ + void __iomem *addr; + + addr = pci_base_offset(adapter, index); + + netxen_nic_pci_change_crbwindow(adapter, 0); + *value = readl(addr); + netxen_nic_pci_change_crbwindow(adapter, 1); +} + +int netxen_pci_set_window_warning_count = 0; + +unsigned long +netxen_nic_pci_set_window(struct netxen_adapter *adapter, + unsigned long long addr) +{ + static int ddr_mn_window = -1; + static int qdr_sn_window = -1; + int window; + + if (ADDR_IN_RANGE(addr, NETXEN_ADDR_DDR_NET, NETXEN_ADDR_DDR_NET_MAX)) { + /* DDR network side */ + addr -= NETXEN_ADDR_DDR_NET; + window = (addr >> 25) & 0x3ff; + if (ddr_mn_window != window) { + ddr_mn_window = window; + writel(window, PCI_OFFSET_SECOND_RANGE(adapter, + NETXEN_PCIX_PH_REG + (PCIX_MN_WINDOW))); + /* MUST make sure window is set before we forge on... */ + readl(PCI_OFFSET_SECOND_RANGE(adapter, + NETXEN_PCIX_PH_REG + (PCIX_MN_WINDOW))); + } + addr -= (window * NETXEN_WINDOW_ONE); + addr += NETXEN_PCI_DDR_NET; + } else if (ADDR_IN_RANGE(addr, NETXEN_ADDR_OCM0, NETXEN_ADDR_OCM0_MAX)) { + addr -= NETXEN_ADDR_OCM0; + addr += NETXEN_PCI_OCM0; + } else if (ADDR_IN_RANGE(addr, NETXEN_ADDR_OCM1, NETXEN_ADDR_OCM1_MAX)) { + addr -= NETXEN_ADDR_OCM1; + addr += NETXEN_PCI_OCM1; + } else + if (ADDR_IN_RANGE + (addr, NETXEN_ADDR_QDR_NET, NETXEN_ADDR_QDR_NET_MAX)) { + /* QDR network side */ + addr -= NETXEN_ADDR_QDR_NET; + window = (addr >> 22) & 0x3f; + if (qdr_sn_window != window) { + qdr_sn_window = window; + writel((window << 22), + PCI_OFFSET_SECOND_RANGE(adapter, + NETXEN_PCIX_PH_REG + (PCIX_SN_WINDOW))); + /* MUST make sure window is set before we forge on... */ + readl(PCI_OFFSET_SECOND_RANGE(adapter, + NETXEN_PCIX_PH_REG + (PCIX_SN_WINDOW))); + } + addr -= (window * 0x400000); + addr += NETXEN_PCI_QDR_NET; + } else { + /* + * peg gdb frequently accesses memory that doesn't exist, + * this limits the chit chat so debugging isn't slowed down. + */ + if ((netxen_pci_set_window_warning_count++ < 8) + || (netxen_pci_set_window_warning_count % 64 == 0)) + printk("%s: Warning:netxen_nic_pci_set_window()" + " Unknown address range!\n", + netxen_nic_driver_name); + + } + return addr; +} + +int netxen_nic_get_board_info(struct netxen_adapter *adapter) +{ + int rv = 0; + int addr = BRDCFG_START; + struct netxen_board_info *boardinfo; + int index; + u32 *ptr32; + + boardinfo = &adapter->ahw.boardcfg; + ptr32 = (u32 *) boardinfo; + + for (index = 0; index < sizeof(struct netxen_board_info) / sizeof(u32); + index++) { + if (netxen_rom_fast_read(adapter, addr, ptr32) == -1) { + return -EIO; + } + ptr32++; + addr += sizeof(u32); + } + if (boardinfo->magic != NETXEN_BDINFO_MAGIC) { + printk("%s: ERROR reading %s board config." + " Read %x, expected %x\n", netxen_nic_driver_name, + netxen_nic_driver_name, + boardinfo->magic, NETXEN_BDINFO_MAGIC); + rv = -1; + } + if (boardinfo->header_version != NETXEN_BDINFO_VERSION) { + printk("%s: Unknown board config version." + " Read %x, expected %x\n", netxen_nic_driver_name, + boardinfo->header_version, NETXEN_BDINFO_VERSION); + rv = -1; + } + + DPRINTK(INFO, "Discovered board type:0x%x ", boardinfo->board_type); + switch ((netxen_brdtype_t) boardinfo->board_type) { + case NETXEN_BRDTYPE_P2_SB35_4G: + adapter->ahw.board_type = NETXEN_NIC_GBE; + break; + case NETXEN_BRDTYPE_P2_SB31_10G: + case NETXEN_BRDTYPE_P2_SB31_10G_IMEZ: + case NETXEN_BRDTYPE_P2_SB31_10G_HMEZ: + case NETXEN_BRDTYPE_P2_SB31_10G_CX4: + adapter->ahw.board_type = NETXEN_NIC_XGBE; + break; + case NETXEN_BRDTYPE_P1_BD: + case NETXEN_BRDTYPE_P1_SB: + case NETXEN_BRDTYPE_P1_SMAX: + case NETXEN_BRDTYPE_P1_SOCK: + adapter->ahw.board_type = NETXEN_NIC_GBE; + break; + default: + printk("%s: Unknown(%x)\n", netxen_nic_driver_name, + boardinfo->board_type); + break; + } + + return rv; +} + +/* NIU access sections */ + +int netxen_nic_set_mtu_gb(struct netxen_port *port, int new_mtu) +{ + struct netxen_adapter *adapter = port->adapter; + netxen_nic_write_w0(adapter, + NETXEN_NIU_GB_MAX_FRAME_SIZE(port->portnum), + new_mtu); + return 0; +} + +int netxen_nic_set_mtu_xgb(struct netxen_port *port, int new_mtu) +{ + struct netxen_adapter *adapter = port->adapter; + new_mtu += NETXEN_NIU_HDRSIZE + NETXEN_NIU_TLRSIZE; + netxen_nic_write_w0(adapter, NETXEN_NIU_XGE_MAX_FRAME_SIZE, new_mtu); + return 0; +} + +void netxen_nic_init_niu_gb(struct netxen_adapter *adapter) +{ + int portno; + for (portno = 0; portno < NETXEN_NIU_MAX_GBE_PORTS; portno++) + netxen_niu_gbe_init_port(adapter, portno); +} + +void netxen_nic_stop_all_ports(struct netxen_adapter *adapter) +{ + int port_nr; + struct netxen_port *port; + + for (port_nr = 0; port_nr < adapter->ahw.max_ports; port_nr++) { + port = adapter->port[port_nr]; + if (adapter->ops->stop_port) + adapter->ops->stop_port(adapter, port->portnum); + } +} + +void +netxen_crb_writelit_adapter(struct netxen_adapter *adapter, unsigned long off, + int data) +{ + void __iomem *addr; + + if (ADDR_IN_WINDOW1(off)) { + writel(data, NETXEN_CRB_NORMALIZE(adapter, off)); + } else { + netxen_nic_pci_change_crbwindow(adapter, 0); + addr = pci_base_offset(adapter, off); + writel(data, addr); + netxen_nic_pci_change_crbwindow(adapter, 1); + } +} + +void netxen_nic_set_link_parameters(struct netxen_port *port) +{ + struct netxen_adapter *adapter = port->adapter; + __le32 status; + u16 autoneg; + __le32 mode; + + netxen_nic_read_w0(adapter, NETXEN_NIU_MODE, &mode); + if (netxen_get_niu_enable_ge(mode)) { /* Gb 10/100/1000 Mbps mode */ + if (adapter->ops->phy_read + && adapter->ops-> + phy_read(adapter, port->portnum, + NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_STATUS, + &status) == 0) { + if (netxen_get_phy_link(status)) { + switch (netxen_get_phy_speed(status)) { + case 0: + port->link_speed = SPEED_10; + break; + case 1: + port->link_speed = SPEED_100; + break; + case 2: + port->link_speed = SPEED_1000; + break; + default: + port->link_speed = -1; + break; + } + switch (netxen_get_phy_duplex(status)) { + case 0: + port->link_duplex = DUPLEX_HALF; + break; + case 1: + port->link_duplex = DUPLEX_FULL; + break; + default: + port->link_duplex = -1; + break; + } + if (adapter->ops->phy_read + && adapter->ops-> + phy_read(adapter, port->portnum, + NETXEN_NIU_GB_MII_MGMT_ADDR_AUTONEG, + (__le32 *) & autoneg) != 0) + port->link_autoneg = autoneg; + } else + goto link_down; + } else { + link_down: + port->link_speed = -1; + port->link_duplex = -1; + } + } +} + +void netxen_nic_flash_print(struct netxen_adapter *adapter) +{ + int valid = 1; + u32 fw_major = 0; + u32 fw_minor = 0; + u32 fw_build = 0; + char brd_name[NETXEN_MAX_SHORT_NAME]; + struct netxen_new_user_info user_info; + int i, addr = USER_START; + u32 *ptr32; + + struct netxen_board_info *board_info = &(adapter->ahw.boardcfg); + if (board_info->magic != NETXEN_BDINFO_MAGIC) { + printk + ("NetXen Unknown board config, Read 0x%x expected as 0x%x\n", + board_info->magic, NETXEN_BDINFO_MAGIC); + valid = 0; + } + if (board_info->header_version != NETXEN_BDINFO_VERSION) { + printk("NetXen Unknown board config version." + " Read %x, expected %x\n", + board_info->header_version, NETXEN_BDINFO_VERSION); + valid = 0; + } + if (valid) { + ptr32 = (u32 *) & user_info; + for (i = 0; + i < sizeof(struct netxen_new_user_info) / sizeof(u32); + i++) { + if (netxen_rom_fast_read(adapter, addr, ptr32) == -1) { + printk("%s: ERROR reading %s board userarea.\n", + netxen_nic_driver_name, + netxen_nic_driver_name); + return; + } + ptr32++; + addr += sizeof(u32); + } + get_brd_name_by_type(board_info->board_type, brd_name); + + printk("NetXen %s Board S/N %s Chip id 0x%x\n", + brd_name, user_info.serial_num, board_info->chip_id); + + printk("NetXen %s Board #%d, Chip id 0x%x\n", + board_info->board_type == 0x0b ? "XGB" : "GBE", + board_info->board_num, board_info->chip_id); + fw_major = readl(NETXEN_CRB_NORMALIZE(adapter, + NETXEN_FW_VERSION_MAJOR)); + fw_minor = readl(NETXEN_CRB_NORMALIZE(adapter, + NETXEN_FW_VERSION_MINOR)); + fw_build = + readl(NETXEN_CRB_NORMALIZE(adapter, NETXEN_FW_VERSION_SUB)); + + printk("NetXen Firmware version %d.%d.%d\n", fw_major, fw_minor, + fw_build); + } + if (fw_major != _NETXEN_NIC_LINUX_MAJOR) { + printk(KERN_ERR "The mismatch in driver version and firmware " + "version major number\n" + "Driver version major number = %d \t" + "Firmware version major number = %d \n", + _NETXEN_NIC_LINUX_MAJOR, fw_major); + adapter->driver_mismatch = 1; + } + if (fw_minor != _NETXEN_NIC_LINUX_MINOR) { + printk(KERN_ERR "The mismatch in driver version and firmware " + "version minor number\n" + "Driver version minor number = %d \t" + "Firmware version minor number = %d \n", + _NETXEN_NIC_LINUX_MINOR, fw_minor); + adapter->driver_mismatch = 1; + } + if (adapter->driver_mismatch) + printk(KERN_INFO "Use the driver with version no %d.%d.xxx\n", + fw_major, fw_minor); +} + +int netxen_crb_read_val(struct netxen_adapter *adapter, unsigned long off) +{ + int data; + netxen_nic_hw_read_wx(adapter, off, &data, 4); + return data; +} diff --git a/drivers/net/netxen/netxen_nic_hw.h b/drivers/net/netxen/netxen_nic_hw.h new file mode 100644 index 00000000000..201a636b7ab --- /dev/null +++ b/drivers/net/netxen/netxen_nic_hw.h @@ -0,0 +1,482 @@ +/* + * Copyright (C) 2003 - 2006 NetXen, Inc. + * All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, + * MA 02111-1307, USA. + * + * The full GNU General Public License is included in this distribution + * in the file called LICENSE. + * + * Contact Information: + * info@netxen.com + * NetXen, + * 3965 Freedom Circle, Fourth floor, + * Santa Clara, CA 95054 + * + * + * Structures, enums, and macros for the MAC + * + */ + +#ifndef __NETXEN_NIC_HW_H_ +#define __NETXEN_NIC_HW_H_ + +#include "netxen_nic_hdr.h" + +/* Hardware memory size of 128 meg */ +#define NETXEN_MEMADDR_MAX (128 * 1024 * 1024) + +#ifndef readq +static inline u64 readq(void __iomem * addr) +{ + return readl(addr) | (((u64) readl(addr + 4)) << 32LL); +} +#endif + +#ifndef writeq +static inline void writeq(u64 val, void __iomem * addr) +{ + writel(((u32) (val)), (addr)); + writel(((u32) (val >> 32)), (addr + 4)); +} +#endif + +static inline void netxen_nic_hw_block_write64(u64 __iomem * data_ptr, + u64 __iomem * addr, + int num_words) +{ + int num; + for (num = 0; num < num_words; num++) { + writeq(readq((void __iomem *)data_ptr), addr); + addr++; + data_ptr++; + } +} + +static inline void netxen_nic_hw_block_read64(u64 __iomem * data_ptr, + u64 __iomem * addr, int num_words) +{ + int num; + for (num = 0; num < num_words; num++) { + writeq(readq((void __iomem *)addr), data_ptr); + addr++; + data_ptr++; + } + +} + +struct netxen_adapter; + +#define NETXEN_PCI_MAPSIZE_BYTES (NETXEN_PCI_MAPSIZE << 20) + +#define NETXEN_NIC_LOCKED_READ_REG(X, Y) \ + addr = pci_base_offset(adapter, (X)); \ + *(u32 *)Y = readl(addr); + +struct netxen_port; +void netxen_nic_set_link_parameters(struct netxen_port *port); +void netxen_nic_flash_print(struct netxen_adapter *adapter); +int netxen_nic_hw_write_wx(struct netxen_adapter *adapter, u64 off, + void *data, int len); +void netxen_crb_writelit_adapter(struct netxen_adapter *adapter, + unsigned long off, int data); +int netxen_nic_hw_read_wx(struct netxen_adapter *adapter, u64 off, + void *data, int len); + +typedef u8 netxen_ethernet_macaddr_t[6]; + +/* Nibble or Byte mode for phy interface (GbE mode only) */ +typedef enum { + NETXEN_NIU_10_100_MB = 0, + NETXEN_NIU_1000_MB +} netxen_niu_gbe_ifmode_t; + +#define _netxen_crb_get_bit(var, bit) ((var >> bit) & 0x1) + +/* + * NIU GB MAC Config Register 0 (applies to GB0, GB1, GB2, GB3) + * + * Bit 0 : enable_tx => 1:enable frame xmit, 0:disable + * Bit 1 : tx_synced => R/O: xmit enable synched to xmit stream + * Bit 2 : enable_rx => 1:enable frame recv, 0:disable + * Bit 3 : rx_synced => R/O: recv enable synched to recv stream + * Bit 4 : tx_flowctl => 1:enable pause frame generation, 0:disable + * Bit 5 : rx_flowctl => 1:act on recv'd pause frames, 0:ignore + * Bit 8 : loopback => 1:loop MAC xmits to MAC recvs, 0:normal + * Bit 16: tx_reset_pb => 1:reset frame xmit protocol blk, 0:no-op + * Bit 17: rx_reset_pb => 1:reset frame recv protocol blk, 0:no-op + * Bit 18: tx_reset_mac => 1:reset data/ctl multiplexer blk, 0:no-op + * Bit 19: rx_reset_mac => 1:reset ctl frames & timers blk, 0:no-op + * Bit 31: soft_reset => 1:reset the MAC and the SERDES, 0:no-op + */ + +#define netxen_gb_enable_tx(config_word) \ + set_bit(0, (unsigned long*)(&config_word)) +#define netxen_gb_enable_rx(config_word) \ + set_bit(2, (unsigned long*)(&config_word)) +#define netxen_gb_tx_flowctl(config_word) \ + set_bit(4, (unsigned long*)(&config_word)) +#define netxen_gb_rx_flowctl(config_word) \ + set_bit(5, (unsigned long*)(&config_word)) +#define netxen_gb_tx_reset_pb(config_word) \ + set_bit(16, (unsigned long*)(&config_word)) +#define netxen_gb_rx_reset_pb(config_word) \ + set_bit(17, (unsigned long*)(&config_word)) +#define netxen_gb_tx_reset_mac(config_word) \ + set_bit(18, (unsigned long*)(&config_word)) +#define netxen_gb_rx_reset_mac(config_word) \ + set_bit(19, (unsigned long*)(&config_word)) +#define netxen_gb_soft_reset(config_word) \ + set_bit(31, (unsigned long*)(&config_word)) + +#define netxen_gb_unset_tx_flowctl(config_word) \ + clear_bit(4, (unsigned long *)(&config_word)) +#define netxen_gb_unset_rx_flowctl(config_word) \ + clear_bit(5, (unsigned long*)(&config_word)) + +#define netxen_gb_get_tx_synced(config_word) \ + _netxen_crb_get_bit((config_word), 1) +#define netxen_gb_get_rx_synced(config_word) \ + _netxen_crb_get_bit((config_word), 3) +#define netxen_gb_get_tx_flowctl(config_word) \ + _netxen_crb_get_bit((config_word), 4) +#define netxen_gb_get_rx_flowctl(config_word) \ + _netxen_crb_get_bit((config_word), 5) +#define netxen_gb_get_soft_reset(config_word) \ + _netxen_crb_get_bit((config_word), 31) + +/* + * NIU GB MAC Config Register 1 (applies to GB0, GB1, GB2, GB3) + * + * Bit 0 : duplex => 1:full duplex mode, 0:half duplex + * Bit 1 : crc_enable => 1:append CRC to xmit frames, 0:dont append + * Bit 2 : padshort => 1:pad short frames and add CRC, 0:dont pad + * Bit 4 : checklength => 1:check framelen with actual,0:dont check + * Bit 5 : hugeframes => 1:allow oversize xmit frames, 0:dont allow + * Bits 8-9 : intfmode => 01:nibble (10/100), 10:byte (1000) + * Bits 12-15 : preamblelen => preamble field length in bytes, default 7 + */ + +#define netxen_gb_set_duplex(config_word) \ + set_bit(0, (unsigned long*)&config_word) +#define netxen_gb_set_crc_enable(config_word) \ + set_bit(1, (unsigned long*)&config_word) +#define netxen_gb_set_padshort(config_word) \ + set_bit(2, (unsigned long*)&config_word) +#define netxen_gb_set_checklength(config_word) \ + set_bit(4, (unsigned long*)&config_word) +#define netxen_gb_set_hugeframes(config_word) \ + set_bit(5, (unsigned long*)&config_word) +#define netxen_gb_set_preamblelen(config_word, val) \ + ((config_word) |= ((val) << 12) & 0xF000) +#define netxen_gb_set_intfmode(config_word, val) \ + ((config_word) |= ((val) << 8) & 0x300) + +#define netxen_gb_get_stationaddress_low(config_word) ((config_word) >> 16) + +#define netxen_gb_set_mii_mgmt_clockselect(config_word, val) \ + ((config_word) |= ((val) & 0x07)) +#define netxen_gb_mii_mgmt_reset(config_word) \ + set_bit(31, (unsigned long*)&config_word) +#define netxen_gb_mii_mgmt_unset(config_word) \ + clear_bit(31, (unsigned long*)&config_word) + +/* + * NIU GB MII Mgmt Command Register (applies to GB0, GB1, GB2, GB3) + * Bit 0 : read_cycle => 1:perform single read cycle, 0:no-op + * Bit 1 : scan_cycle => 1:perform continuous read cycles, 0:no-op + */ + +#define netxen_gb_mii_mgmt_set_read_cycle(config_word) \ + set_bit(0, (unsigned long*)&config_word) +#define netxen_gb_mii_mgmt_reg_addr(config_word, val) \ + ((config_word) |= ((val) & 0x1F)) +#define netxen_gb_mii_mgmt_phy_addr(config_word, val) \ + ((config_word) |= (((val) & 0x1F) << 8)) + +/* + * NIU GB MII Mgmt Indicators Register (applies to GB0, GB1, GB2, GB3) + * Read-only register. + * Bit 0 : busy => 1:performing an MII mgmt cycle, 0:idle + * Bit 1 : scanning => 1:scan operation in progress, 0:idle + * Bit 2 : notvalid => :mgmt result data not yet valid, 0:idle + */ +#define netxen_get_gb_mii_mgmt_busy(config_word) \ + _netxen_crb_get_bit(config_word, 0) +#define netxen_get_gb_mii_mgmt_scanning(config_word) \ + _netxen_crb_get_bit(config_word, 1) +#define netxen_get_gb_mii_mgmt_notvalid(config_word) \ + _netxen_crb_get_bit(config_word, 2) + +/* + * PHY-Specific MII control/status registers. + */ +typedef enum { + NETXEN_NIU_GB_MII_MGMT_ADDR_CONTROL = 0, + NETXEN_NIU_GB_MII_MGMT_ADDR_STATUS = 1, + NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_ID_0 = 2, + NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_ID_1 = 3, + NETXEN_NIU_GB_MII_MGMT_ADDR_AUTONEG = 4, + NETXEN_NIU_GB_MII_MGMT_ADDR_LNKPART = 5, + NETXEN_NIU_GB_MII_MGMT_ADDR_AUTONEG_MORE = 6, + NETXEN_NIU_GB_MII_MGMT_ADDR_NEXTPAGE_XMIT = 7, + NETXEN_NIU_GB_MII_MGMT_ADDR_LNKPART_NEXTPAGE = 8, + NETXEN_NIU_GB_MII_MGMT_ADDR_1000BT_CONTROL = 9, + NETXEN_NIU_GB_MII_MGMT_ADDR_1000BT_STATUS = 10, + NETXEN_NIU_GB_MII_MGMT_ADDR_EXTENDED_STATUS = 15, + NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_CONTROL = 16, + NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_STATUS = 17, + NETXEN_NIU_GB_MII_MGMT_ADDR_INT_ENABLE = 18, + NETXEN_NIU_GB_MII_MGMT_ADDR_INT_STATUS = 19, + NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_CONTROL_MORE = 20, + NETXEN_NIU_GB_MII_MGMT_ADDR_RECV_ERROR_COUNT = 21, + NETXEN_NIU_GB_MII_MGMT_ADDR_LED_CONTROL = 24, + NETXEN_NIU_GB_MII_MGMT_ADDR_LED_OVERRIDE = 25, + NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_CONTROL_MORE_YET = 26, + NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_STATUS_MORE = 27 +} netxen_niu_phy_register_t; + +/* + * PHY-Specific Status Register (reg 17). + * + * Bit 0 : jabber => 1:jabber detected, 0:not + * Bit 1 : polarity => 1:polarity reversed, 0:normal + * Bit 2 : recvpause => 1:receive pause enabled, 0:disabled + * Bit 3 : xmitpause => 1:transmit pause enabled, 0:disabled + * Bit 4 : energydetect => 1:sleep, 0:active + * Bit 5 : downshift => 1:downshift, 0:no downshift + * Bit 6 : crossover => 1:MDIX (crossover), 0:MDI (no crossover) + * Bits 7-9 : cablelen => not valid in 10Mb/s mode + * 0:<50m, 1:50-80m, 2:80-110m, 3:110-140m, 4:>140m + * Bit 10 : link => 1:link up, 0:link down + * Bit 11 : resolved => 1:speed and duplex resolved, 0:not yet + * Bit 12 : pagercvd => 1:page received, 0:page not received + * Bit 13 : duplex => 1:full duplex, 0:half duplex + * Bits 14-15 : speed => 0:10Mb/s, 1:100Mb/s, 2:1000Mb/s, 3:rsvd + */ + +#define netxen_get_phy_cablelen(config_word) (((config_word) >> 7) & 0x07) +#define netxen_get_phy_speed(config_word) (((config_word) >> 14) & 0x03) + +#define netxen_set_phy_speed(config_word, val) \ + ((config_word) |= ((val & 0x03) << 14)) +#define netxen_set_phy_duplex(config_word) \ + set_bit(13, (unsigned long*)&config_word) +#define netxen_clear_phy_duplex(config_word) \ + clear_bit(13, (unsigned long*)&config_word) + +#define netxen_get_phy_jabber(config_word) \ + _netxen_crb_get_bit(config_word, 0) +#define netxen_get_phy_polarity(config_word) \ + _netxen_crb_get_bit(config_word, 1) +#define netxen_get_phy_recvpause(config_word) \ + _netxen_crb_get_bit(config_word, 2) +#define netxen_get_phy_xmitpause(config_word) \ + _netxen_crb_get_bit(config_word, 3) +#define netxen_get_phy_energydetect(config_word) \ + _netxen_crb_get_bit(config_word, 4) +#define netxen_get_phy_downshift(config_word) \ + _netxen_crb_get_bit(config_word, 5) +#define netxen_get_phy_crossover(config_word) \ + _netxen_crb_get_bit(config_word, 6) +#define netxen_get_phy_link(config_word) \ + _netxen_crb_get_bit(config_word, 10) +#define netxen_get_phy_resolved(config_word) \ + _netxen_crb_get_bit(config_word, 11) +#define netxen_get_phy_pagercvd(config_word) \ + _netxen_crb_get_bit(config_word, 12) +#define netxen_get_phy_duplex(config_word) \ + _netxen_crb_get_bit(config_word, 13) + +/* + * Interrupt Register definition + * This definition applies to registers 18 and 19 (int enable and int status). + * Bit 0 : jabber + * Bit 1 : polarity_changed + * Bit 4 : energy_detect + * Bit 5 : downshift + * Bit 6 : mdi_xover_changed + * Bit 7 : fifo_over_underflow + * Bit 8 : false_carrier + * Bit 9 : symbol_error + * Bit 10: link_status_changed + * Bit 11: autoneg_completed + * Bit 12: page_received + * Bit 13: duplex_changed + * Bit 14: speed_changed + * Bit 15: autoneg_error + */ + +#define netxen_get_phy_int_jabber(config_word) \ + _netxen_crb_get_bit(config_word, 0) +#define netxen_get_phy_int_polarity_changed(config_word) \ + _netxen_crb_get_bit(config_word, 1) +#define netxen_get_phy_int_energy_detect(config_word) \ + _netxen_crb_get_bit(config_word, 4) +#define netxen_get_phy_int_downshift(config_word) \ + _netxen_crb_get_bit(config_word, 5) +#define netxen_get_phy_int_mdi_xover_changed(config_word) \ + _netxen_crb_get_bit(config_word, 6) +#define netxen_get_phy_int_fifo_over_underflow(config_word) \ + _netxen_crb_get_bit(config_word, 7) +#define netxen_get_phy_int_false_carrier(config_word) \ + _netxen_crb_get_bit(config_word, 8) +#define netxen_get_phy_int_symbol_error(config_word) \ + _netxen_crb_get_bit(config_word, 9) +#define netxen_get_phy_int_link_status_changed(config_word) \ + _netxen_crb_get_bit(config_word, 10) +#define netxen_get_phy_int_autoneg_completed(config_word) \ + _netxen_crb_get_bit(config_word, 11) +#define netxen_get_phy_int_page_received(config_word) \ + _netxen_crb_get_bit(config_word, 12) +#define netxen_get_phy_int_duplex_changed(config_word) \ + _netxen_crb_get_bit(config_word, 13) +#define netxen_get_phy_int_speed_changed(config_word) \ + _netxen_crb_get_bit(config_word, 14) +#define netxen_get_phy_int_autoneg_error(config_word) \ + _netxen_crb_get_bit(config_word, 15) + +#define netxen_set_phy_int_link_status_changed(config_word) \ + set_bit(10, (unsigned long*)&config_word) +#define netxen_set_phy_int_autoneg_completed(config_word) \ + set_bit(11, (unsigned long*)&config_word) +#define netxen_set_phy_int_speed_changed(config_word) \ + set_bit(14, (unsigned long*)&config_word) + +/* + * NIU Mode Register. + * Bit 0 : enable FibreChannel + * Bit 1 : enable 10/100/1000 Ethernet + * Bit 2 : enable 10Gb Ethernet + */ + +#define netxen_get_niu_enable_ge(config_word) \ + _netxen_crb_get_bit(config_word, 1) + +/* Promiscous mode options (GbE mode only) */ +typedef enum { + NETXEN_NIU_PROMISC_MODE = 0, + NETXEN_NIU_NON_PROMISC_MODE +} netxen_niu_prom_mode_t; + +/* + * NIU GB Drop CRC Register + * + * Bit 0 : drop_gb0 => 1:drop pkts with bad CRCs, 0:pass them on + * Bit 1 : drop_gb1 => 1:drop pkts with bad CRCs, 0:pass them on + * Bit 2 : drop_gb2 => 1:drop pkts with bad CRCs, 0:pass them on + * Bit 3 : drop_gb3 => 1:drop pkts with bad CRCs, 0:pass them on + */ + +#define netxen_set_gb_drop_gb0(config_word) \ + set_bit(0, (unsigned long*)&config_word) +#define netxen_set_gb_drop_gb1(config_word) \ + set_bit(1, (unsigned long*)&config_word) +#define netxen_set_gb_drop_gb2(config_word) \ + set_bit(2, (unsigned long*)&config_word) +#define netxen_set_gb_drop_gb3(config_word) \ + set_bit(3, (unsigned long*)&config_word) + +#define netxen_clear_gb_drop_gb0(config_word) \ + clear_bit(0, (unsigned long*)&config_word) +#define netxen_clear_gb_drop_gb1(config_word) \ + clear_bit(1, (unsigned long*)&config_word) +#define netxen_clear_gb_drop_gb2(config_word) \ + clear_bit(2, (unsigned long*)&config_word) +#define netxen_clear_gb_drop_gb3(config_word) \ + clear_bit(3, (unsigned long*)&config_word) + +/* + * NIU XG MAC Config Register + * + * Bit 0 : tx_enable => 1:enable frame xmit, 0:disable + * Bit 2 : rx_enable => 1:enable frame recv, 0:disable + * Bit 4 : soft_reset => 1:reset the MAC , 0:no-op + * Bit 27: xaui_framer_reset + * Bit 28: xaui_rx_reset + * Bit 29: xaui_tx_reset + * Bit 30: xg_ingress_afifo_reset + * Bit 31: xg_egress_afifo_reset + */ + +#define netxen_xg_soft_reset(config_word) \ + set_bit(4, (unsigned long*)&config_word) + +/* + * MAC Control Register + * + * Bit 0-1 : id_pool0 + * Bit 2 : enable_xtnd0 + * Bit 4-5 : id_pool1 + * Bit 6 : enable_xtnd1 + * Bit 8-9 : id_pool2 + * Bit 10 : enable_xtnd2 + * Bit 12-13 : id_pool3 + * Bit 14 : enable_xtnd3 + * Bit 24-25 : mode_select + * Bit 28-31 : enable_pool + */ + +#define netxen_nic_mcr_set_id_pool0(config, val) \ + ((config) |= ((val) &0x03)) +#define netxen_nic_mcr_set_enable_xtnd0(config) \ + (set_bit(3, (unsigned long *)&(config))) +#define netxen_nic_mcr_set_id_pool1(config, val) \ + ((config) |= (((val) & 0x03) << 4)) +#define netxen_nic_mcr_set_enable_xtnd1(config) \ + (set_bit(6, (unsigned long *)&(config))) +#define netxen_nic_mcr_set_id_pool2(config, val) \ + ((config) |= (((val) & 0x03) << 8)) +#define netxen_nic_mcr_set_enable_xtnd2(config) \ + (set_bit(10, (unsigned long *)&(config))) +#define netxen_nic_mcr_set_id_pool3(config, val) \ + ((config) |= (((val) & 0x03) << 12)) +#define netxen_nic_mcr_set_enable_xtnd3(config) \ + (set_bit(14, (unsigned long *)&(config))) +#define netxen_nic_mcr_set_mode_select(config, val) \ + ((config) |= (((val) & 0x03) << 24)) +#define netxen_nic_mcr_set_enable_pool(config, val) \ + ((config) |= (((val) & 0x0f) << 28)) + +/* Set promiscuous mode for a GbE interface */ +int netxen_niu_set_promiscuous_mode(struct netxen_adapter *adapter, int port, + netxen_niu_prom_mode_t mode); +int netxen_niu_xg_set_promiscuous_mode(struct netxen_adapter *adapter, + int port, netxen_niu_prom_mode_t mode); + +/* get/set the MAC address for a given MAC */ +int netxen_niu_macaddr_get(struct netxen_adapter *adapter, int port, + netxen_ethernet_macaddr_t * addr); +int netxen_niu_macaddr_set(struct netxen_port *port, + netxen_ethernet_macaddr_t addr); + +/* XG versons */ +int netxen_niu_xg_macaddr_get(struct netxen_adapter *adapter, int port, + netxen_ethernet_macaddr_t * addr); +int netxen_niu_xg_macaddr_set(struct netxen_port *port, + netxen_ethernet_macaddr_t addr); + +/* Generic enable for GbE ports. Will detect the speed of the link. */ +int netxen_niu_gbe_init_port(struct netxen_adapter *adapter, int port); + +int netxen_niu_xg_init_port(struct netxen_adapter *adapter, int port); + +/* Disable a GbE interface */ +int netxen_niu_disable_gbe_port(struct netxen_adapter *adapter, int port); + +int netxen_niu_disable_xg_port(struct netxen_adapter *adapter, int port); + +#endif /* __NETXEN_NIC_HW_H_ */ diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c new file mode 100644 index 00000000000..0dca029bc3e --- /dev/null +++ b/drivers/net/netxen/netxen_nic_init.c @@ -0,0 +1,1304 @@ +/* + * Copyright (C) 2003 - 2006 NetXen, Inc. + * All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, + * MA 02111-1307, USA. + * + * The full GNU General Public License is included in this distribution + * in the file called LICENSE. + * + * Contact Information: + * info@netxen.com + * NetXen, + * 3965 Freedom Circle, Fourth floor, + * Santa Clara, CA 95054 + * + * + * Source file for NIC routines to initialize the Phantom Hardware + * + */ + +#include <linux/netdevice.h> +#include <linux/delay.h> +#include "netxen_nic.h" +#include "netxen_nic_hw.h" +#include "netxen_nic_ioctl.h" +#include "netxen_nic_phan_reg.h" + +struct crb_addr_pair { + long addr; + long data; +}; + +#define NETXEN_MAX_CRB_XFORM 60 +static unsigned int crb_addr_xform[NETXEN_MAX_CRB_XFORM]; +#define NETXEN_ADDR_ERROR ((unsigned long ) 0xffffffff ) + +#define crb_addr_transform(name) \ + crb_addr_xform[NETXEN_HW_PX_MAP_CRB_##name] = \ + NETXEN_HW_CRB_HUB_AGT_ADR_##name << 20 + +#define NETXEN_NIC_XDMA_RESET 0x8000ff + +static inline void +netxen_nic_locked_write_reg(struct netxen_adapter *adapter, + unsigned long off, int *data) +{ + void __iomem *addr = pci_base_offset(adapter, off); + writel(*data, addr); +} + +static void crb_addr_transform_setup(void) +{ + crb_addr_transform(XDMA); + crb_addr_transform(TIMR); + crb_addr_transform(SRE); + crb_addr_transform(SQN3); + crb_addr_transform(SQN2); + crb_addr_transform(SQN1); + crb_addr_transform(SQN0); + crb_addr_transform(SQS3); + crb_addr_transform(SQS2); + crb_addr_transform(SQS1); + crb_addr_transform(SQS0); + crb_addr_transform(RPMX7); + crb_addr_transform(RPMX6); + crb_addr_transform(RPMX5); + crb_addr_transform(RPMX4); + crb_addr_transform(RPMX3); + crb_addr_transform(RPMX2); + crb_addr_transform(RPMX1); + crb_addr_transform(RPMX0); + crb_addr_transform(ROMUSB); + crb_addr_transform(SN); + crb_addr_transform(QMN); + crb_addr_transform(QMS); + crb_addr_transform(PGNI); + crb_addr_transform(PGND); + crb_addr_transform(PGN3); + crb_addr_transform(PGN2); + crb_addr_transform(PGN1); + crb_addr_transform(PGN0); + crb_addr_transform(PGSI); + crb_addr_transform(PGSD); + crb_addr_transform(PGS3); + crb_addr_transform(PGS2); + crb_addr_transform(PGS1); + crb_addr_transform(PGS0); + crb_addr_transform(PS); + crb_addr_transform(PH); + crb_addr_transform(NIU); + crb_addr_transform(I2Q); + crb_addr_transform(EG); + crb_addr_transform(MN); + crb_addr_transform(MS); + crb_addr_transform(CAS2); + crb_addr_transform(CAS1); + crb_addr_transform(CAS0); + crb_addr_transform(CAM); + crb_addr_transform(C2C1); + crb_addr_transform(C2C0); +} + +int netxen_init_firmware(struct netxen_adapter *adapter) +{ + u32 state = 0, loops = 0, err = 0; + + /* Window 1 call */ + state = readl(NETXEN_CRB_NORMALIZE(adapter, CRB_CMDPEG_STATE)); + + if (state == PHAN_INITIALIZE_ACK) + return 0; + + while (state != PHAN_INITIALIZE_COMPLETE && loops < 2000) { + udelay(100); + /* Window 1 call */ + state = readl(NETXEN_CRB_NORMALIZE(adapter, CRB_CMDPEG_STATE)); + + loops++; + } + if (loops >= 2000) { + printk(KERN_ERR "Cmd Peg initialization not complete:%x.\n", + state); + err = -EIO; + return err; + } + /* Window 1 call */ + writel(PHAN_INITIALIZE_ACK, + NETXEN_CRB_NORMALIZE(adapter, CRB_CMDPEG_STATE)); + + return err; +} + +#define NETXEN_ADDR_LIMIT 0xffffffffULL + +void *netxen_alloc(struct pci_dev *pdev, size_t sz, dma_addr_t * ptr, + struct pci_dev **used_dev) +{ + void *addr; + + addr = pci_alloc_consistent(pdev, sz, ptr); + if ((unsigned long long)(*ptr) < NETXEN_ADDR_LIMIT) { + *used_dev = pdev; + return addr; + } + pci_free_consistent(pdev, sz, addr, *ptr); + addr = pci_alloc_consistent(NULL, sz, ptr); + *used_dev = NULL; + return addr; +} + +void netxen_initialize_adapter_sw(struct netxen_adapter *adapter) +{ + int ctxid, ring; + u32 i; + u32 num_rx_bufs = 0; + struct netxen_rcv_desc_ctx *rcv_desc; + + DPRINTK(INFO, "initializing some queues: %p\n", adapter); + for (ctxid = 0; ctxid < MAX_RCV_CTX; ++ctxid) { + for (ring = 0; ring < NUM_RCV_DESC_RINGS; ring++) { + struct netxen_rx_buffer *rx_buf; + rcv_desc = &adapter->recv_ctx[ctxid].rcv_desc[ring]; + rcv_desc->rcv_free = rcv_desc->max_rx_desc_count; + rcv_desc->begin_alloc = 0; + rx_buf = rcv_desc->rx_buf_arr; + num_rx_bufs = rcv_desc->max_rx_desc_count; + /* + * Now go through all of them, set reference handles + * and put them in the queues. + */ + for (i = 0; i < num_rx_bufs; i++) { + rx_buf->ref_handle = i; + rx_buf->state = NETXEN_BUFFER_FREE; + + DPRINTK(INFO, "Rx buf:ctx%d i(%d) rx_buf:" + "%p\n", ctxid, i, rx_buf); + rx_buf++; + } + } + } + DPRINTK(INFO, "initialized buffers for %s and %s\n", + "adapter->free_cmd_buf_list", "adapter->free_rxbuf"); +} + +void netxen_initialize_adapter_hw(struct netxen_adapter *adapter) +{ + int ports = 0; + struct netxen_board_info *board_info = &(adapter->ahw.boardcfg); + + if (netxen_nic_get_board_info(adapter) != 0) + printk("%s: Error getting board config info.\n", + netxen_nic_driver_name); + get_brd_port_by_type(board_info->board_type, &ports); + if (ports == 0) + printk(KERN_ERR "%s: Unknown board type\n", + netxen_nic_driver_name); + adapter->ahw.max_ports = ports; +} + +void netxen_initialize_adapter_ops(struct netxen_adapter *adapter) +{ + struct netxen_drvops *ops = adapter->ops; + switch (adapter->ahw.board_type) { + case NETXEN_NIC_GBE: + ops->enable_phy_interrupts = + netxen_niu_gbe_enable_phy_interrupts; + ops->disable_phy_interrupts = + netxen_niu_gbe_disable_phy_interrupts; + ops->handle_phy_intr = netxen_nic_gbe_handle_phy_intr; + ops->macaddr_set = netxen_niu_macaddr_set; + ops->set_mtu = netxen_nic_set_mtu_gb; + ops->set_promisc = netxen_niu_set_promiscuous_mode; + ops->unset_promisc = netxen_niu_set_promiscuous_mode; + ops->phy_read = netxen_niu_gbe_phy_read; + ops->phy_write = netxen_niu_gbe_phy_write; + ops->init_port = netxen_niu_gbe_init_port; + ops->init_niu = netxen_nic_init_niu_gb; + ops->stop_port = netxen_niu_disable_gbe_port; + break; + + case NETXEN_NIC_XGBE: + ops->enable_phy_interrupts = + netxen_niu_xgbe_enable_phy_interrupts; + ops->disable_phy_interrupts = + netxen_niu_xgbe_disable_phy_interrupts; + ops->handle_phy_intr = netxen_nic_xgbe_handle_phy_intr; + ops->macaddr_set = netxen_niu_xg_macaddr_set; + ops->set_mtu = netxen_nic_set_mtu_xgb; + ops->init_port = netxen_niu_xg_init_port; + ops->set_promisc = netxen_niu_xg_set_promiscuous_mode; + ops->unset_promisc = netxen_niu_xg_set_promiscuous_mode; + ops->stop_port = netxen_niu_disable_xg_port; + break; + + default: + break; + } +} + +/* + * netxen_decode_crb_addr(0 - utility to translate from internal Phantom CRB + * address to external PCI CRB address. + */ +unsigned long netxen_decode_crb_addr(unsigned long addr) +{ + int i; + unsigned long base_addr, offset, pci_base; + + crb_addr_transform_setup(); + + pci_base = NETXEN_ADDR_ERROR; + base_addr = addr & 0xfff00000; + offset = addr & 0x000fffff; + + for (i = 0; i < NETXEN_MAX_CRB_XFORM; i++) { + if (crb_addr_xform[i] == base_addr) { + pci_base = i << 20; + break; + } + } + if (pci_base == NETXEN_ADDR_ERROR) + return pci_base; + else + return (pci_base + offset); +} + +static long rom_max_timeout = 10000; +static long rom_lock_timeout = 1000000; + +static inline int rom_lock(struct netxen_adapter *adapter) +{ + int iter; + u32 done = 0; + int timeout = 0; + + while (!done) { + /* acquire semaphore2 from PCI HW block */ + netxen_nic_read_w0(adapter, NETXEN_PCIE_REG(PCIE_SEM2_LOCK), + &done); + if (done == 1) + break; + if (timeout >= rom_lock_timeout) + return -EIO; + + timeout++; + /* + * Yield CPU + */ + if (!in_atomic()) + schedule(); + else { + for (iter = 0; iter < 20; iter++) + cpu_relax(); /*This a nop instr on i386 */ + } + } + netxen_nic_reg_write(adapter, NETXEN_ROM_LOCK_ID, ROM_LOCK_DRIVER); + return 0; +} + +int netxen_wait_rom_done(struct netxen_adapter *adapter) +{ + long timeout = 0; + long done = 0; + + while (done == 0) { + done = netxen_nic_reg_read(adapter, NETXEN_ROMUSB_GLB_STATUS); + done &= 2; + timeout++; + if (timeout >= rom_max_timeout) { + printk("Timeout reached waiting for rom done"); + return -EIO; + } + } + return 0; +} + +static inline int netxen_rom_wren(struct netxen_adapter *adapter) +{ + /* Set write enable latch in ROM status register */ + netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_ABYTE_CNT, 0); + netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_INSTR_OPCODE, + M25P_INSTR_WREN); + if (netxen_wait_rom_done(adapter)) { + return -1; + } + return 0; +} + +static inline unsigned int netxen_rdcrbreg(struct netxen_adapter *adapter, + unsigned int addr) +{ + unsigned int data = 0xdeaddead; + data = netxen_nic_reg_read(adapter, addr); + return data; +} + +static inline int netxen_do_rom_rdsr(struct netxen_adapter *adapter) +{ + netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_INSTR_OPCODE, + M25P_INSTR_RDSR); + if (netxen_wait_rom_done(adapter)) { + return -1; + } + return netxen_rdcrbreg(adapter, NETXEN_ROMUSB_ROM_RDATA); +} + +static inline void netxen_rom_unlock(struct netxen_adapter *adapter) +{ + u32 val; + + /* release semaphore2 */ + netxen_nic_read_w0(adapter, NETXEN_PCIE_REG(PCIE_SEM2_UNLOCK), &val); + +} + +int netxen_rom_wip_poll(struct netxen_adapter *adapter) +{ + long timeout = 0; + long wip = 1; + int val; + netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_ABYTE_CNT, 0); + while (wip != 0) { + val = netxen_do_rom_rdsr(adapter); + wip = val & 1; + timeout++; + if (timeout > rom_max_timeout) { + return -1; + } + } + return 0; +} + +static inline int do_rom_fast_write(struct netxen_adapter *adapter, + int addr, int data) +{ + if (netxen_rom_wren(adapter)) { + return -1; + } + netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_WDATA, data); + netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_ADDRESS, addr); + netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_ABYTE_CNT, 3); + netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_INSTR_OPCODE, + M25P_INSTR_PP); + if (netxen_wait_rom_done(adapter)) { + netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_ABYTE_CNT, 0); + return -1; + } + + return netxen_rom_wip_poll(adapter); +} + +static inline int +do_rom_fast_read(struct netxen_adapter *adapter, int addr, int *valp) +{ + netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_ADDRESS, addr); + netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_ABYTE_CNT, 3); + udelay(100); /* prevent bursting on CRB */ + netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_DUMMY_BYTE_CNT, 0); + netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_INSTR_OPCODE, 0xb); + if (netxen_wait_rom_done(adapter)) { + printk("Error waiting for rom done\n"); + return -EIO; + } + /* reset abyte_cnt and dummy_byte_cnt */ + netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_ABYTE_CNT, 0); + udelay(100); /* prevent bursting on CRB */ + netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_DUMMY_BYTE_CNT, 0); + + *valp = netxen_nic_reg_read(adapter, NETXEN_ROMUSB_ROM_RDATA); + return 0; +} + +int netxen_rom_fast_read(struct netxen_adapter *adapter, int addr, int *valp) +{ + int ret; + + if (rom_lock(adapter) != 0) + return -EIO; + + ret = do_rom_fast_read(adapter, addr, valp); + netxen_rom_unlock(adapter); + return ret; +} + +int netxen_rom_fast_write(struct netxen_adapter *adapter, int addr, int data) +{ + int ret = 0; + + if (rom_lock(adapter) != 0) { + return -1; + } + ret = do_rom_fast_write(adapter, addr, data); + netxen_rom_unlock(adapter); + return ret; +} +int netxen_do_rom_se(struct netxen_adapter *adapter, int addr) +{ + netxen_rom_wren(adapter); + netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_ADDRESS, addr); + netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_ABYTE_CNT, 3); + netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_INSTR_OPCODE, + M25P_INSTR_SE); + if (netxen_wait_rom_done(adapter)) { + netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_ABYTE_CNT, 0); + return -1; + } + return netxen_rom_wip_poll(adapter); +} + +int netxen_rom_se(struct netxen_adapter *adapter, int addr) +{ + int ret = 0; + if (rom_lock(adapter) != 0) { + return -1; + } + ret = netxen_do_rom_se(adapter, addr); + netxen_rom_unlock(adapter); + return ret; +} + +#define NETXEN_BOARDTYPE 0x4008 +#define NETXEN_BOARDNUM 0x400c +#define NETXEN_CHIPNUM 0x4010 +#define NETXEN_ROMBUS_RESET 0xFFFFFFFF +#define NETXEN_ROM_FIRST_BARRIER 0x800000000ULL +#define NETXEN_ROM_FOUND_INIT 0x400 + +int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose) +{ + int addr, val, status; + int n, i; + int init_delay = 0; + struct crb_addr_pair *buf; + unsigned long off; + + /* resetall */ + status = netxen_nic_get_board_info(adapter); + if (status) + printk("%s: netxen_pinit_from_rom: Error getting board info\n", + netxen_nic_driver_name); + + netxen_crb_writelit_adapter(adapter, NETXEN_ROMUSB_GLB_SW_RESET, + NETXEN_ROMBUS_RESET); + + if (verbose) { + int val; + if (netxen_rom_fast_read(adapter, NETXEN_BOARDTYPE, &val) == 0) + printk("P2 ROM board type: 0x%08x\n", val); + else + printk("Could not read board type\n"); + if (netxen_rom_fast_read(adapter, NETXEN_BOARDNUM, &val) == 0) + printk("P2 ROM board num: 0x%08x\n", val); + else + printk("Could not read board number\n"); + if (netxen_rom_fast_read(adapter, NETXEN_CHIPNUM, &val) == 0) + printk("P2 ROM chip num: 0x%08x\n", val); + else + printk("Could not read chip number\n"); + } + + if (netxen_rom_fast_read(adapter, 0, &n) == 0 + && (n & NETXEN_ROM_FIRST_BARRIER)) { + n &= ~NETXEN_ROM_ROUNDUP; + if (n < NETXEN_ROM_FOUND_INIT) { + if (verbose) + printk("%s: %d CRB init values found" + " in ROM.\n", netxen_nic_driver_name, n); + } else { + printk("%s:n=0x%x Error! NetXen card flash not" + " initialized.\n", __FUNCTION__, n); + return -EIO; + } + buf = kcalloc(n, sizeof(struct crb_addr_pair), GFP_KERNEL); + if (buf == NULL) { + printk("%s: netxen_pinit_from_rom: Unable to calloc " + "memory.\n", netxen_nic_driver_name); + return -ENOMEM; + } + for (i = 0; i < n; i++) { + if (netxen_rom_fast_read(adapter, 8 * i + 4, &val) != 0 + || netxen_rom_fast_read(adapter, 8 * i + 8, + &addr) != 0) + return -EIO; + + buf[i].addr = addr; + buf[i].data = val; + + if (verbose) + printk("%s: PCI: 0x%08x == 0x%08x\n", + netxen_nic_driver_name, (unsigned int) + netxen_decode_crb_addr((unsigned long) + addr), val); + } + for (i = 0; i < n; i++) { + + off = + netxen_decode_crb_addr((unsigned long)buf[i].addr) + + NETXEN_PCI_CRBSPACE; + /* skipping cold reboot MAGIC */ + if (off == NETXEN_CAM_RAM(0x1fc)) + continue; + + /* After writing this register, HW needs time for CRB */ + /* to quiet down (else crb_window returns 0xffffffff) */ + if (off == NETXEN_ROMUSB_GLB_SW_RESET) { + init_delay = 1; + /* hold xdma in reset also */ + buf[i].data = NETXEN_NIC_XDMA_RESET; + } + + if (ADDR_IN_WINDOW1(off)) { + writel(buf[i].data, + NETXEN_CRB_NORMALIZE(adapter, off)); + } else { + netxen_nic_pci_change_crbwindow(adapter, 0); + writel(buf[i].data, + pci_base_offset(adapter, off)); + + netxen_nic_pci_change_crbwindow(adapter, 1); + } + if (init_delay == 1) { + ssleep(1); + init_delay = 0; + } + msleep(1); + } + kfree(buf); + + /* disable_peg_cache_all */ + + /* unreset_net_cache */ + netxen_nic_hw_read_wx(adapter, NETXEN_ROMUSB_GLB_SW_RESET, &val, + 4); + netxen_crb_writelit_adapter(adapter, NETXEN_ROMUSB_GLB_SW_RESET, + (val & 0xffffff0f)); + /* p2dn replyCount */ + netxen_crb_writelit_adapter(adapter, + NETXEN_CRB_PEG_NET_D + 0xec, 0x1e); + /* disable_peg_cache 0 */ + netxen_crb_writelit_adapter(adapter, + NETXEN_CRB_PEG_NET_D + 0x4c, 8); + /* disable_peg_cache 1 */ + netxen_crb_writelit_adapter(adapter, + NETXEN_CRB_PEG_NET_I + 0x4c, 8); + + /* peg_clr_all */ + + /* peg_clr 0 */ + netxen_crb_writelit_adapter(adapter, NETXEN_CRB_PEG_NET_0 + 0x8, + 0); + netxen_crb_writelit_adapter(adapter, NETXEN_CRB_PEG_NET_0 + 0xc, + 0); + /* peg_clr 1 */ + netxen_crb_writelit_adapter(adapter, NETXEN_CRB_PEG_NET_1 + 0x8, + 0); + netxen_crb_writelit_adapter(adapter, NETXEN_CRB_PEG_NET_1 + 0xc, + 0); + /* peg_clr 2 */ + netxen_crb_writelit_adapter(adapter, NETXEN_CRB_PEG_NET_2 + 0x8, + 0); + netxen_crb_writelit_adapter(adapter, NETXEN_CRB_PEG_NET_2 + 0xc, + 0); + /* peg_clr 3 */ + netxen_crb_writelit_adapter(adapter, NETXEN_CRB_PEG_NET_3 + 0x8, + 0); + netxen_crb_writelit_adapter(adapter, NETXEN_CRB_PEG_NET_3 + 0xc, + 0); + } + return 0; +} + +void netxen_phantom_init(struct netxen_adapter *adapter, int pegtune_val) +{ + u32 val = 0; + int loops = 0; + + if (!pegtune_val) { + while (val != PHAN_INITIALIZE_COMPLETE && loops < 200000) { + udelay(100); + schedule(); + val = + readl(NETXEN_CRB_NORMALIZE + (adapter, CRB_CMDPEG_STATE)); + loops++; + } + if (val != PHAN_INITIALIZE_COMPLETE) + printk("WARNING: Initial boot wait loop failed...\n"); + } +} + +int netxen_nic_rx_has_work(struct netxen_adapter *adapter) +{ + int ctx; + + for (ctx = 0; ctx < MAX_RCV_CTX; ++ctx) { + struct netxen_recv_context *recv_ctx = + &(adapter->recv_ctx[ctx]); + u32 consumer; + struct status_desc *desc_head; + struct status_desc *desc; + + consumer = recv_ctx->status_rx_consumer; + desc_head = recv_ctx->rcv_status_desc_head; + desc = &desc_head[consumer]; + + if (((le16_to_cpu(desc->owner)) & STATUS_OWNER_HOST)) + return 1; + } + + return 0; +} + +static inline int netxen_nic_check_temp(struct netxen_adapter *adapter) +{ + int port_num; + struct netxen_port *port; + struct net_device *netdev; + uint32_t temp, temp_state, temp_val; + int rv = 0; + + temp = readl(NETXEN_CRB_NORMALIZE(adapter, CRB_TEMP_STATE)); + + temp_state = nx_get_temp_state(temp); + temp_val = nx_get_temp_val(temp); + + if (temp_state == NX_TEMP_PANIC) { + printk(KERN_ALERT + "%s: Device temperature %d degrees C exceeds" + " maximum allowed. Hardware has been shut down.\n", + netxen_nic_driver_name, temp_val); + for (port_num = 0; port_num < adapter->ahw.max_ports; + port_num++) { + port = adapter->port[port_num]; + netdev = port->netdev; + + netif_carrier_off(netdev); + netif_stop_queue(netdev); + } + rv = 1; + } else if (temp_state == NX_TEMP_WARN) { + if (adapter->temp == NX_TEMP_NORMAL) { + printk(KERN_ALERT + "%s: Device temperature %d degrees C " + "exceeds operating range." + " Immediate action needed.\n", + netxen_nic_driver_name, temp_val); + } + } else { + if (adapter->temp == NX_TEMP_WARN) { + printk(KERN_INFO + "%s: Device temperature is now %d degrees C" + " in normal range.\n", netxen_nic_driver_name, + temp_val); + } + } + adapter->temp = temp_state; + return rv; +} + +void netxen_watchdog_task(unsigned long v) +{ + int port_num; + struct netxen_port *port; + struct net_device *netdev; + struct netxen_adapter *adapter = (struct netxen_adapter *)v; + + if (netxen_nic_check_temp(adapter)) + return; + + for (port_num = 0; port_num < adapter->ahw.max_ports; port_num++) { + port = adapter->port[port_num]; + netdev = port->netdev; + + if ((netif_running(netdev)) && !netif_carrier_ok(netdev)) { + printk(KERN_INFO "%s port %d, %s carrier is now ok\n", + netxen_nic_driver_name, port_num, netdev->name); + netif_carrier_on(netdev); + } + + if (netif_queue_stopped(netdev)) + netif_wake_queue(netdev); + } + + if (adapter->ops->handle_phy_intr) + adapter->ops->handle_phy_intr(adapter); + mod_timer(&adapter->watchdog_timer, jiffies + 2 * HZ); +} + +/* + * netxen_process_rcv() send the received packet to the protocol stack. + * and if the number of receives exceeds RX_BUFFERS_REFILL, then we + * invoke the routine to send more rx buffers to the Phantom... + */ +void +netxen_process_rcv(struct netxen_adapter *adapter, int ctxid, + struct status_desc *desc) +{ + struct netxen_port *port = adapter->port[STATUS_DESC_PORT(desc)]; + struct pci_dev *pdev = port->pdev; + struct net_device *netdev = port->netdev; + int index = le16_to_cpu(desc->reference_handle); + struct netxen_recv_context *recv_ctx = &(adapter->recv_ctx[ctxid]); + struct netxen_rx_buffer *buffer; + struct sk_buff *skb; + u32 length = le16_to_cpu(desc->total_length); + u32 desc_ctx; + struct netxen_rcv_desc_ctx *rcv_desc; + int ret; + + desc_ctx = STATUS_DESC_TYPE(desc); + if (unlikely(desc_ctx >= NUM_RCV_DESC_RINGS)) { + printk("%s: %s Bad Rcv descriptor ring\n", + netxen_nic_driver_name, netdev->name); + return; + } + + rcv_desc = &recv_ctx->rcv_desc[desc_ctx]; + buffer = &rcv_desc->rx_buf_arr[index]; + + pci_unmap_single(pdev, buffer->dma, rcv_desc->dma_size, + PCI_DMA_FROMDEVICE); + + skb = (struct sk_buff *)buffer->skb; + + if (likely(STATUS_DESC_STATUS(desc) == STATUS_CKSUM_OK)) { + port->stats.csummed++; + skb->ip_summed = CHECKSUM_UNNECESSARY; + } else + skb->ip_summed = CHECKSUM_NONE; + skb->dev = netdev; + skb_put(skb, length); + skb->protocol = eth_type_trans(skb, netdev); + + ret = netif_receive_skb(skb); + + /* + * RH: Do we need these stats on a regular basis. Can we get it from + * Linux stats. + */ + switch (ret) { + case NET_RX_SUCCESS: + port->stats.uphappy++; + break; + + case NET_RX_CN_LOW: + port->stats.uplcong++; + break; + + case NET_RX_CN_MOD: + port->stats.upmcong++; + break; + + case NET_RX_CN_HIGH: + port->stats.uphcong++; + break; + + case NET_RX_DROP: + port->stats.updropped++; + break; + + default: + port->stats.updunno++; + break; + } + + netdev->last_rx = jiffies; + + rcv_desc->rcv_free++; + rcv_desc->rcv_pending--; + + /* + * We just consumed one buffer so post a buffer. + */ + adapter->stats.post_called++; + buffer->skb = NULL; + buffer->state = NETXEN_BUFFER_FREE; + + port->stats.no_rcv++; + port->stats.rxbytes += length; +} + +/* Process Receive status ring */ +u32 netxen_process_rcv_ring(struct netxen_adapter *adapter, int ctxid, int max) +{ + struct netxen_recv_context *recv_ctx = &(adapter->recv_ctx[ctxid]); + struct status_desc *desc_head = recv_ctx->rcv_status_desc_head; + struct status_desc *desc; /* used to read status desc here */ + u32 consumer = recv_ctx->status_rx_consumer; + int count = 0, ring; + + DPRINTK(INFO, "procesing receive\n"); + /* + * we assume in this case that there is only one port and that is + * port #1...changes need to be done in firmware to indicate port + * number as part of the descriptor. This way we will be able to get + * the netdev which is associated with that device. + */ + while (count < max) { + desc = &desc_head[consumer]; + if (!((le16_to_cpu(desc->owner)) & STATUS_OWNER_HOST)) { + DPRINTK(ERR, "desc %p ownedby %x\n", desc, desc->owner); + break; + } + netxen_process_rcv(adapter, ctxid, desc); + desc->owner = STATUS_OWNER_PHANTOM; + consumer = (consumer + 1) & (adapter->max_rx_desc_count - 1); + count++; + } + if (count) { + for (ring = 0; ring < NUM_RCV_DESC_RINGS; ring++) { + netxen_post_rx_buffers(adapter, ctxid, ring); + } + } + + /* update the consumer index in phantom */ + if (count) { + adapter->stats.process_rcv++; + recv_ctx->status_rx_consumer = consumer; + + /* Window = 1 */ + writel(consumer, + NETXEN_CRB_NORMALIZE(adapter, + recv_crb_registers[ctxid]. + crb_rcv_status_consumer)); + } + + return count; +} + +/* Process Command status ring */ +void netxen_process_cmd_ring(unsigned long data) +{ + u32 last_consumer; + u32 consumer; + struct netxen_adapter *adapter = (struct netxen_adapter *)data; + int count = 0; + struct netxen_cmd_buffer *buffer; + struct netxen_port *port; /* port #1 */ + struct netxen_port *nport; + struct pci_dev *pdev; + struct netxen_skb_frag *frag; + u32 i; + struct sk_buff *skb = NULL; + int p; + + spin_lock(&adapter->tx_lock); + last_consumer = adapter->last_cmd_consumer; + DPRINTK(INFO, "procesing xmit complete\n"); + /* we assume in this case that there is only one port and that is + * port #1...changes need to be done in firmware to indicate port + * number as part of the descriptor. This way we will be able to get + * the netdev which is associated with that device. + */ + consumer = + readl(NETXEN_CRB_NORMALIZE(adapter, CRB_CMD_CONSUMER_OFFSET)); + + if (last_consumer == consumer) { /* Ring is empty */ + DPRINTK(INFO, "last_consumer %d == consumer %d\n", + last_consumer, consumer); + spin_unlock(&adapter->tx_lock); + return; + } + + adapter->proc_cmd_buf_counter++; + adapter->stats.process_xmit++; + /* + * Not needed - does not seem to be used anywhere. + * adapter->cmd_consumer = consumer; + */ + spin_unlock(&adapter->tx_lock); + + while ((last_consumer != consumer) && (count < MAX_STATUS_HANDLE)) { + buffer = &adapter->cmd_buf_arr[last_consumer]; + port = adapter->port[buffer->port]; + pdev = port->pdev; + frag = &buffer->frag_array[0]; + skb = buffer->skb; + if (skb && (cmpxchg(&buffer->skb, skb, 0) == skb)) { + pci_unmap_single(pdev, frag->dma, frag->length, + PCI_DMA_TODEVICE); + for (i = 1; i < buffer->frag_count; i++) { + DPRINTK(INFO, "getting fragment no %d\n", i); + frag++; /* Get the next frag */ + pci_unmap_page(pdev, frag->dma, frag->length, + PCI_DMA_TODEVICE); + } + + port->stats.skbfreed++; + dev_kfree_skb_any(skb); + skb = NULL; + } else if (adapter->proc_cmd_buf_counter == 1) { + port->stats.txnullskb++; + } + if (unlikely(netif_queue_stopped(port->netdev) + && netif_carrier_ok(port->netdev)) + && ((jiffies - port->netdev->trans_start) > + port->netdev->watchdog_timeo)) { + schedule_work(&port->adapter->tx_timeout_task); + } + + last_consumer = get_next_index(last_consumer, + adapter->max_tx_desc_count); + count++; + } + adapter->stats.noxmitdone += count; + + count = 0; + spin_lock(&adapter->tx_lock); + if ((--adapter->proc_cmd_buf_counter) == 0) { + adapter->last_cmd_consumer = last_consumer; + while ((adapter->last_cmd_consumer != consumer) + && (count < MAX_STATUS_HANDLE)) { + buffer = + &adapter->cmd_buf_arr[adapter->last_cmd_consumer]; + count++; + if (buffer->skb) + break; + else + adapter->last_cmd_consumer = + get_next_index(adapter->last_cmd_consumer, + adapter->max_tx_desc_count); + } + } + if (count) { + for (p = 0; p < adapter->ahw.max_ports; p++) { + nport = adapter->port[p]; + if (netif_queue_stopped(nport->netdev) + && (nport->flags & NETXEN_NETDEV_STATUS)) { + netif_wake_queue(nport->netdev); + nport->flags &= ~NETXEN_NETDEV_STATUS; + } + } + } + + spin_unlock(&adapter->tx_lock); + DPRINTK(INFO, "last consumer is %d in %s\n", last_consumer, + __FUNCTION__); +} + +/* + * netxen_post_rx_buffers puts buffer in the Phantom memory + */ +void netxen_post_rx_buffers(struct netxen_adapter *adapter, u32 ctx, u32 ringid) +{ + struct pci_dev *pdev = adapter->ahw.pdev; + struct sk_buff *skb; + struct netxen_recv_context *recv_ctx = &(adapter->recv_ctx[ctx]); + struct netxen_rcv_desc_ctx *rcv_desc = NULL; + struct netxen_recv_crb *crbarea = &recv_crb_registers[ctx]; + struct netxen_rcv_desc_crb *rcv_desc_crb = NULL; + u32 producer; + struct rcv_desc *pdesc; + struct netxen_rx_buffer *buffer; + int count = 0; + int index = 0; + + adapter->stats.post_called++; + rcv_desc = &recv_ctx->rcv_desc[ringid]; + rcv_desc_crb = &crbarea->rcv_desc_crb[ringid]; + + producer = rcv_desc->producer; + index = rcv_desc->begin_alloc; + buffer = &rcv_desc->rx_buf_arr[index]; + /* We can start writing rx descriptors into the phantom memory. */ + while (buffer->state == NETXEN_BUFFER_FREE) { + skb = dev_alloc_skb(rcv_desc->skb_size); + if (unlikely(!skb)) { + /* + * We need to schedule the posting of buffers to the pegs. + */ + rcv_desc->begin_alloc = index; + DPRINTK(ERR, "netxen_post_rx_buffers: " + " allocated only %d buffers\n", count); + break; + } + count++; /* now there should be no failure */ + pdesc = &rcv_desc->desc_head[producer]; + skb_reserve(skb, NET_IP_ALIGN); + /* + * This will be setup when we receive the + * buffer after it has been filled + * skb->dev = netdev; + */ + buffer->skb = skb; + buffer->state = NETXEN_BUFFER_BUSY; + buffer->dma = pci_map_single(pdev, skb->data, + rcv_desc->dma_size, + PCI_DMA_FROMDEVICE); + /* make a rcv descriptor */ + pdesc->reference_handle = le16_to_cpu(buffer->ref_handle); + pdesc->buffer_length = le16_to_cpu(rcv_desc->dma_size); + pdesc->addr_buffer = cpu_to_le64(buffer->dma); + DPRINTK(INFO, "done writing descripter\n"); + producer = + get_next_index(producer, rcv_desc->max_rx_desc_count); + index = get_next_index(index, rcv_desc->max_rx_desc_count); + buffer = &rcv_desc->rx_buf_arr[index]; + } + + /* if we did allocate buffers, then write the count to Phantom */ + if (count) { + rcv_desc->begin_alloc = index; + rcv_desc->rcv_pending += count; + adapter->stats.lastposted = count; + adapter->stats.posted += count; + rcv_desc->producer = producer; + if (rcv_desc->rcv_free >= 32) { + rcv_desc->rcv_free = 0; + /* Window = 1 */ + writel((producer - 1) & + (rcv_desc->max_rx_desc_count - 1), + NETXEN_CRB_NORMALIZE(adapter, + rcv_desc_crb-> + crb_rcv_producer_offset)); + wmb(); + } + } +} + +int netxen_nic_tx_has_work(struct netxen_adapter *adapter) +{ + if (find_diff_among(adapter->last_cmd_consumer, + adapter->cmd_producer, + adapter->max_tx_desc_count) > 0) + return 1; + + return 0; +} + +int +netxen_nic_fill_statistics(struct netxen_adapter *adapter, + struct netxen_port *port, + struct netxen_statistics *netxen_stats) +{ + void __iomem *addr; + + if (adapter->ahw.board_type == NETXEN_NIC_XGBE) { + netxen_nic_pci_change_crbwindow(adapter, 0); + NETXEN_NIC_LOCKED_READ_REG(NETXEN_NIU_XGE_TX_BYTE_CNT, + &(netxen_stats->tx_bytes)); + NETXEN_NIC_LOCKED_READ_REG(NETXEN_NIU_XGE_TX_FRAME_CNT, + &(netxen_stats->tx_packets)); + NETXEN_NIC_LOCKED_READ_REG(NETXEN_NIU_XGE_RX_BYTE_CNT, + &(netxen_stats->rx_bytes)); + NETXEN_NIC_LOCKED_READ_REG(NETXEN_NIU_XGE_RX_FRAME_CNT, + &(netxen_stats->rx_packets)); + NETXEN_NIC_LOCKED_READ_REG(NETXEN_NIU_XGE_AGGR_ERROR_CNT, + &(netxen_stats->rx_errors)); + NETXEN_NIC_LOCKED_READ_REG(NETXEN_NIU_XGE_CRC_ERROR_CNT, + &(netxen_stats->rx_crc_errors)); + NETXEN_NIC_LOCKED_READ_REG(NETXEN_NIU_XGE_OVERSIZE_FRAME_ERR, + &(netxen_stats-> + rx_long_length_error)); + NETXEN_NIC_LOCKED_READ_REG(NETXEN_NIU_XGE_UNDERSIZE_FRAME_ERR, + &(netxen_stats-> + rx_short_length_error)); + + netxen_nic_pci_change_crbwindow(adapter, 1); + } else { + spin_lock_bh(&adapter->tx_lock); + netxen_stats->tx_bytes = port->stats.txbytes; + netxen_stats->tx_packets = port->stats.xmitedframes + + port->stats.xmitfinished; + netxen_stats->rx_bytes = port->stats.rxbytes; + netxen_stats->rx_packets = port->stats.no_rcv; + netxen_stats->rx_errors = port->stats.rcvdbadskb; + netxen_stats->tx_errors = port->stats.nocmddescriptor; + netxen_stats->rx_short_length_error = port->stats.uplcong; + netxen_stats->rx_long_length_error = port->stats.uphcong; + netxen_stats->rx_crc_errors = 0; + netxen_stats->rx_mac_errors = 0; + spin_unlock_bh(&adapter->tx_lock); + } + return 0; +} + +void netxen_nic_clear_stats(struct netxen_adapter *adapter) +{ + struct netxen_port *port; + int port_num; + + memset(&adapter->stats, 0, sizeof(adapter->stats)); + for (port_num = 0; port_num < adapter->ahw.max_ports; port_num++) { + port = adapter->port[port_num]; + memset(&port->stats, 0, sizeof(port->stats)); + } +} + +int +netxen_nic_clear_statistics(struct netxen_adapter *adapter, + struct netxen_port *port) +{ + int data = 0; + + netxen_nic_pci_change_crbwindow(adapter, 0); + + netxen_nic_locked_write_reg(adapter, NETXEN_NIU_XGE_TX_BYTE_CNT, &data); + netxen_nic_locked_write_reg(adapter, NETXEN_NIU_XGE_TX_FRAME_CNT, + &data); + netxen_nic_locked_write_reg(adapter, NETXEN_NIU_XGE_RX_BYTE_CNT, &data); + netxen_nic_locked_write_reg(adapter, NETXEN_NIU_XGE_RX_FRAME_CNT, + &data); + netxen_nic_locked_write_reg(adapter, NETXEN_NIU_XGE_AGGR_ERROR_CNT, + &data); + netxen_nic_locked_write_reg(adapter, NETXEN_NIU_XGE_CRC_ERROR_CNT, + &data); + netxen_nic_locked_write_reg(adapter, NETXEN_NIU_XGE_OVERSIZE_FRAME_ERR, + &data); + netxen_nic_locked_write_reg(adapter, NETXEN_NIU_XGE_UNDERSIZE_FRAME_ERR, + &data); + + netxen_nic_pci_change_crbwindow(adapter, 1); + netxen_nic_clear_stats(adapter); + return 0; +} + +int +netxen_nic_do_ioctl(struct netxen_adapter *adapter, void *u_data, + struct netxen_port *port) +{ + struct netxen_nic_ioctl_data data; + struct netxen_nic_ioctl_data *up_data; + int retval = 0; + struct netxen_statistics netxen_stats; + + up_data = (void *)u_data; + + DPRINTK(INFO, "doing ioctl for %p\n", adapter); + if (copy_from_user(&data, (void __user *)up_data, sizeof(data))) { + /* evil user tried to crash the kernel */ + DPRINTK(ERR, "bad copy from userland: %d\n", (int)sizeof(data)); + retval = -EFAULT; + goto error_out; + } + + /* Shouldn't access beyond legal limits of "char u[64];" member */ + if (!data.ptr && (data.size > sizeof(data.u))) { + /* evil user tried to crash the kernel */ + DPRINTK(ERR, "bad size: %d\n", data.size); + retval = -EFAULT; + goto error_out; + } + + switch (data.cmd) { + case netxen_nic_cmd_pci_read: + if ((retval = netxen_nic_hw_read_wx(adapter, data.off, + &(data.u), data.size))) + goto error_out; + if (copy_to_user + ((void __user *)&(up_data->u), &(data.u), data.size)) { + DPRINTK(ERR, "bad copy to userland: %d\n", + (int)sizeof(data)); + retval = -EFAULT; + goto error_out; + } + data.rv = 0; + break; + + case netxen_nic_cmd_pci_write: + data.rv = netxen_nic_hw_write_wx(adapter, data.off, &(data.u), + data.size); + break; + + case netxen_nic_cmd_pci_config_read: + switch (data.size) { + case 1: + data.rv = pci_read_config_byte(adapter->ahw.pdev, + data.off, + (char *)&(data.u)); + break; + case 2: + data.rv = pci_read_config_word(adapter->ahw.pdev, + data.off, + (short *)&(data.u)); + break; + case 4: + data.rv = pci_read_config_dword(adapter->ahw.pdev, + data.off, + (u32 *) & (data.u)); + break; + } + if (copy_to_user + ((void __user *)&(up_data->u), &(data.u), data.size)) { + DPRINTK(ERR, "bad copy to userland: %d\n", + (int)sizeof(data)); + retval = -EFAULT; + goto error_out; + } + break; + + case netxen_nic_cmd_pci_config_write: + switch (data.size) { + case 1: + data.rv = pci_write_config_byte(adapter->ahw.pdev, + data.off, + *(char *)&(data.u)); + break; + case 2: + data.rv = pci_write_config_word(adapter->ahw.pdev, + data.off, + *(short *)&(data.u)); + break; + case 4: + data.rv = pci_write_config_dword(adapter->ahw.pdev, + data.off, + *(u32 *) & (data.u)); + break; + } + break; + + case netxen_nic_cmd_get_stats: + data.rv = + netxen_nic_fill_statistics(adapter, port, &netxen_stats); + if (copy_to_user + ((void __user *)(up_data->ptr), (void *)&netxen_stats, + sizeof(struct netxen_statistics))) { + DPRINTK(ERR, "bad copy to userland: %d\n", + (int)sizeof(netxen_stats)); + retval = -EFAULT; + goto error_out; + } + up_data->rv = data.rv; + break; + + case netxen_nic_cmd_clear_stats: + data.rv = netxen_nic_clear_statistics(adapter, port); + up_data->rv = data.rv; + break; + + case netxen_nic_cmd_get_version: + if (copy_to_user + ((void __user *)&(up_data->u), NETXEN_NIC_LINUX_VERSIONID, + sizeof(NETXEN_NIC_LINUX_VERSIONID))) { + DPRINTK(ERR, "bad copy to userland: %d\n", + (int)sizeof(data)); + retval = -EFAULT; + goto error_out; + } + break; + + default: + DPRINTK(INFO, "bad command %d for %p\n", data.cmd, adapter); + retval = -EOPNOTSUPP; + goto error_out; + } + put_user(data.rv, (u16 __user *) (&(up_data->rv))); + DPRINTK(INFO, "done ioctl for %p well.\n", adapter); + + error_out: + return retval; +} diff --git a/drivers/net/netxen/netxen_nic_ioctl.h b/drivers/net/netxen/netxen_nic_ioctl.h new file mode 100644 index 00000000000..23e53adbf12 --- /dev/null +++ b/drivers/net/netxen/netxen_nic_ioctl.h @@ -0,0 +1,77 @@ +/* + * Copyright (C) 2003 - 2006 NetXen, Inc. + * All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, + * MA 02111-1307, USA. + * + * The full GNU General Public License is included in this distribution + * in the file called LICENSE. + * + * Contact Information: + * info@netxen.com + * NetXen, + * 3965 Freedom Circle, Fourth floor, + * Santa Clara, CA 95054 + */ + +#ifndef __NETXEN_NIC_IOCTL_H__ +#define __NETXEN_NIC_IOCTL_H__ + +#include <linux/sockios.h> + +#define NETXEN_CMD_START SIOCDEVPRIVATE +#define NETXEN_NIC_CMD (NETXEN_CMD_START + 1) +#define NETXEN_NIC_NAME (NETXEN_CMD_START + 2) +#define NETXEN_NIC_NAME_LEN 16 +#define NETXEN_NIC_NAME_RSP "NETXEN" + +typedef enum { + netxen_nic_cmd_none = 0, + netxen_nic_cmd_pci_read, + netxen_nic_cmd_pci_write, + netxen_nic_cmd_pci_mem_read, + netxen_nic_cmd_pci_mem_write, + netxen_nic_cmd_pci_config_read, + netxen_nic_cmd_pci_config_write, + netxen_nic_cmd_get_stats, + netxen_nic_cmd_clear_stats, + netxen_nic_cmd_get_version +} netxen_nic_ioctl_cmd_t; + +struct netxen_nic_ioctl_data { + u32 cmd; + u32 unused1; + u64 off; + u32 size; + u32 rv; + char u[64]; + void *ptr; +}; + +struct netxen_statistics { + u64 rx_packets; + u64 tx_packets; + u64 rx_bytes; + u64 rx_errors; + u64 tx_bytes; + u64 tx_errors; + u64 rx_crc_errors; + u64 rx_short_length_error; + u64 rx_long_length_error; + u64 rx_mac_errors; +}; + +#endif /* __NETXEN_NIC_IOCTL_H_ */ diff --git a/drivers/net/netxen/netxen_nic_isr.c b/drivers/net/netxen/netxen_nic_isr.c new file mode 100644 index 00000000000..ae180fee800 --- /dev/null +++ b/drivers/net/netxen/netxen_nic_isr.c @@ -0,0 +1,215 @@ +/* + * Copyright (C) 2003 - 2006 NetXen, Inc. + * All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, + * MA 02111-1307, USA. + * + * The full GNU General Public License is included in this distribution + * in the file called LICENSE. + * + * Contact Information: + * info@netxen.com + * NetXen, + * 3965 Freedom Circle, Fourth floor, + * Santa Clara, CA 95054 + */ + +#include <linux/netdevice.h> +#include <linux/delay.h> + +#include "netxen_nic.h" +#include "netxen_nic_hw.h" +#include "netxen_nic_phan_reg.h" + +/* + * netxen_nic_get_stats - Get System Network Statistics + * @netdev: network interface device structure + */ +struct net_device_stats *netxen_nic_get_stats(struct net_device *netdev) +{ + struct netxen_port *port = netdev_priv(netdev); + struct net_device_stats *stats = &port->net_stats; + + memset(stats, 0, sizeof(*stats)); + + /* total packets received */ + stats->rx_packets = port->stats.no_rcv; + /* total packets transmitted */ + stats->tx_packets = port->stats.xmitedframes + port->stats.xmitfinished; + /* total bytes received */ + stats->rx_bytes = port->stats.rxbytes; + /* total bytes transmitted */ + stats->tx_bytes = port->stats.txbytes; + /* bad packets received */ + stats->rx_errors = port->stats.rcvdbadskb; + /* packet transmit problems */ + stats->tx_errors = port->stats.nocmddescriptor; + /* no space in linux buffers */ + stats->rx_dropped = port->stats.updropped; + /* no space available in linux */ + stats->tx_dropped = port->stats.txdropped; + + return stats; +} + +void netxen_indicate_link_status(struct netxen_adapter *adapter, u32 portno, + u32 link) +{ + struct netxen_port *pport = adapter->port[portno]; + struct net_device *netdev = pport->netdev; + + if (link) + netif_carrier_on(netdev); + else + netif_carrier_off(netdev); +} + +void netxen_handle_port_int(struct netxen_adapter *adapter, u32 portno, + u32 enable) +{ + __le32 int_src; + struct netxen_port *port; + + /* This should clear the interrupt source */ + if (adapter->ops->phy_read) + adapter->ops->phy_read(adapter, portno, + NETXEN_NIU_GB_MII_MGMT_ADDR_INT_STATUS, + &int_src); + if (int_src == 0) { + DPRINTK(INFO, "No phy interrupts for port #%d\n", portno); + return; + } + if (adapter->ops->disable_phy_interrupts) + adapter->ops->disable_phy_interrupts(adapter, portno); + + port = adapter->port[portno]; + + if (netxen_get_phy_int_jabber(int_src)) + DPRINTK(INFO, "NetXen: %s Jabber interrupt \n", + port->netdev->name); + + if (netxen_get_phy_int_polarity_changed(int_src)) + DPRINTK(INFO, "NetXen: %s POLARITY CHANGED int \n", + port->netdev->name); + + if (netxen_get_phy_int_energy_detect(int_src)) + DPRINTK(INFO, "NetXen: %s ENERGY DETECT INT \n", + port->netdev->name); + + if (netxen_get_phy_int_downshift(int_src)) + DPRINTK(INFO, "NetXen: %s DOWNSHIFT INT \n", + port->netdev->name); + /* write it down later.. */ + if ((netxen_get_phy_int_speed_changed(int_src)) + || (netxen_get_phy_int_link_status_changed(int_src))) { + __le32 status; + + DPRINTK(INFO, "NetXen: %s SPEED CHANGED OR" + " LINK STATUS CHANGED \n", port->netdev->name); + + if (adapter->ops->phy_read + && adapter->ops->phy_read(adapter, portno, + NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_STATUS, + &status) == 0) { + if (netxen_get_phy_int_link_status_changed(int_src)) { + if (netxen_get_phy_link(status)) { + netxen_niu_gbe_init_port(adapter, + portno); + printk("%s: %s Link UP\n", + netxen_nic_driver_name, + port->netdev->name); + + } else { + printk("%s: %s Link DOWN\n", + netxen_nic_driver_name, + port->netdev->name); + } + netxen_indicate_link_status(adapter, portno, + netxen_get_phy_link + (status)); + } + } + } + if (adapter->ops->enable_phy_interrupts) + adapter->ops->enable_phy_interrupts(adapter, portno); +} + +void netxen_nic_isr_other(struct netxen_adapter *adapter) +{ + u32 portno; + u32 val, linkup, qg_linksup; + + /* verify the offset */ + val = readl(NETXEN_CRB_NORMALIZE(adapter, CRB_XG_STATE)); + if (val == adapter->ahw.qg_linksup) + return; + + qg_linksup = adapter->ahw.qg_linksup; + adapter->ahw.qg_linksup = val; + DPRINTK(1, INFO, "%s: link update 0x%08x\n", netxen_nic_driver_name, + val); + for (portno = 0; portno < NETXEN_NIU_MAX_GBE_PORTS; portno++) { + linkup = val & 1; + if (linkup != (qg_linksup & 1)) { + printk(KERN_INFO "%s: PORT %d link %s\n", + netxen_nic_driver_name, portno, + ((linkup == 0) ? "down" : "up")); + netxen_indicate_link_status(adapter, portno, linkup); + if (linkup) + netxen_nic_set_link_parameters(adapter-> + port[portno]); + + } + val = val >> 1; + qg_linksup = qg_linksup >> 1; + } + + adapter->stats.otherints++; + +} + +void netxen_nic_gbe_handle_phy_intr(struct netxen_adapter *adapter) +{ + netxen_nic_isr_other(adapter); +} + +void netxen_nic_xgbe_handle_phy_intr(struct netxen_adapter *adapter) +{ + struct net_device *netdev = adapter->port[0]->netdev; + u32 val; + + /* WINDOW = 1 */ + val = readl(NETXEN_CRB_NORMALIZE(adapter, CRB_XG_STATE)); + + if (adapter->ahw.xg_linkup == 1 && val != XG_LINK_UP) { + printk(KERN_INFO "%s: %s NIC Link is down\n", + netxen_nic_driver_name, netdev->name); + adapter->ahw.xg_linkup = 0; + /* read twice to clear sticky bits */ + /* WINDOW = 0 */ + netxen_nic_read_w0(adapter, NETXEN_NIU_XG_STATUS, &val); + netxen_nic_read_w0(adapter, NETXEN_NIU_XG_STATUS, &val); + + if ((val & 0xffb) != 0xffb) { + printk(KERN_INFO "%s ISR: Sync/Align BAD: 0x%08x\n", + netxen_nic_driver_name, val); + } + } else if (adapter->ahw.xg_linkup == 0 && val == XG_LINK_UP) { + printk(KERN_INFO "%s: %s NIC Link is up\n", + netxen_nic_driver_name, netdev->name); + adapter->ahw.xg_linkup = 1; + } +} diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c new file mode 100644 index 00000000000..1cb662d5bd7 --- /dev/null +++ b/drivers/net/netxen/netxen_nic_main.c @@ -0,0 +1,1161 @@ +/* + * Copyright (C) 2003 - 2006 NetXen, Inc. + * All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, + * MA 02111-1307, USA. + * + * The full GNU General Public License is included in this distribution + * in the file called LICENSE. + * + * Contact Information: + * info@netxen.com + * NetXen, + * 3965 Freedom Circle, Fourth floor, + * Santa Clara, CA 95054 + * + * + * Main source file for NetXen NIC Driver on Linux + * + */ + +#include <linux/vmalloc.h> +#include "netxen_nic_hw.h" + +#include "netxen_nic.h" +#define DEFINE_GLOBAL_RECV_CRB +#include "netxen_nic_phan_reg.h" +#include "netxen_nic_ioctl.h" + +#include <linux/dma-mapping.h> +#include <linux/vmalloc.h> + +#define PHAN_VENDOR_ID 0x4040 + +MODULE_DESCRIPTION("NetXen Multi port (1/10) Gigabit Network Driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(NETXEN_NIC_LINUX_VERSIONID); + +char netxen_nic_driver_name[] = "netxen"; +static char netxen_nic_driver_string[] = "NetXen Network Driver version " + NETXEN_NIC_LINUX_VERSIONID; + +#define NETXEN_NETDEV_WEIGHT 120 +#define NETXEN_ADAPTER_UP_MAGIC 777 +#define NETXEN_NIC_PEG_TUNE 0 + +/* Local functions to NetXen NIC driver */ +static int __devinit netxen_nic_probe(struct pci_dev *pdev, + const struct pci_device_id *ent); +static void __devexit netxen_nic_remove(struct pci_dev *pdev); +static int netxen_nic_open(struct net_device *netdev); +static int netxen_nic_close(struct net_device *netdev); +static int netxen_nic_xmit_frame(struct sk_buff *, struct net_device *); +static void netxen_tx_timeout(struct net_device *netdev); +static void netxen_tx_timeout_task(struct net_device *netdev); +static void netxen_watchdog(unsigned long); +static int netxen_handle_int(struct netxen_adapter *, struct net_device *); +static int netxen_nic_ioctl(struct net_device *netdev, + struct ifreq *ifr, int cmd); +static int netxen_nic_poll(struct net_device *dev, int *budget); +#ifdef CONFIG_NET_POLL_CONTROLLER +static void netxen_nic_poll_controller(struct net_device *netdev); +#endif +static irqreturn_t netxen_intr(int irq, void *data); + +/* PCI Device ID Table */ +static struct pci_device_id netxen_pci_tbl[] __devinitdata = { + {PCI_DEVICE(0x4040, 0x0001)}, + {PCI_DEVICE(0x4040, 0x0002)}, + {PCI_DEVICE(0x4040, 0x0003)}, + {PCI_DEVICE(0x4040, 0x0004)}, + {PCI_DEVICE(0x4040, 0x0005)}, + {0,} +}; + +MODULE_DEVICE_TABLE(pci, netxen_pci_tbl); + +/* + * netxen_nic_probe() + * + * The Linux system will invoke this after identifying the vendor ID and + * device Id in the pci_tbl supported by this module. + * + * A quad port card has one operational PCI config space, (function 0), + * which is used to access all four ports. + * + * This routine will initialize the adapter, and setup the global parameters + * along with the port's specific structure. + */ +static int __devinit +netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + struct net_device *netdev = NULL; + struct netxen_adapter *adapter = NULL; + struct netxen_port *port = NULL; + u8 *mem_ptr0 = NULL; + u8 *mem_ptr1 = NULL; + u8 *mem_ptr2 = NULL; + + unsigned long mem_base, mem_len; + int pci_using_dac, i, err; + int ring; + struct netxen_recv_context *recv_ctx = NULL; + struct netxen_rcv_desc_ctx *rcv_desc = NULL; + struct netxen_cmd_buffer *cmd_buf_arr = NULL; + u64 mac_addr[FLASH_NUM_PORTS + 1]; + int valid_mac; + + printk(KERN_INFO "%s \n", netxen_nic_driver_string); + if ((err = pci_enable_device(pdev))) + return err; + if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) { + err = -ENODEV; + goto err_out_disable_pdev; + } + + if ((err = pci_request_regions(pdev, netxen_nic_driver_name))) + goto err_out_disable_pdev; + + pci_set_master(pdev); + if ((pci_set_dma_mask(pdev, DMA_64BIT_MASK) == 0) && + (pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK) == 0)) + pci_using_dac = 1; + else { + if ((err = pci_set_dma_mask(pdev, DMA_32BIT_MASK)) || + (err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK))) + goto err_out_free_res; + + pci_using_dac = 0; + } + + /* remap phys address */ + mem_base = pci_resource_start(pdev, 0); /* 0 is for BAR 0 */ + mem_len = pci_resource_len(pdev, 0); + + /* 128 Meg of memory */ + mem_ptr0 = ioremap(mem_base, FIRST_PAGE_GROUP_SIZE); + mem_ptr1 = + ioremap(mem_base + SECOND_PAGE_GROUP_START, SECOND_PAGE_GROUP_SIZE); + mem_ptr2 = + ioremap(mem_base + THIRD_PAGE_GROUP_START, THIRD_PAGE_GROUP_SIZE); + + if ((mem_ptr0 == 0UL) || (mem_ptr1 == 0UL) || (mem_ptr2 == 0UL)) { + DPRINTK(1, ERR, + "Cannot remap adapter memory aborting.:" + "0 -> %p, 1 -> %p, 2 -> %p\n", + mem_ptr0, mem_ptr1, mem_ptr2); + + err = -EIO; + if (mem_ptr0) + iounmap(mem_ptr0); + if (mem_ptr1) + iounmap(mem_ptr1); + if (mem_ptr2) + iounmap(mem_ptr2); + + goto err_out_free_res; + } + +/* + * Allocate a adapter structure which will manage all the initialization + * as well as the common resources for all ports... + * all the ports will have pointer to this adapter as well as Adapter + * will have pointers of all the ports structures. + */ + + /* One adapter structure for all 4 ports.... */ + adapter = kzalloc(sizeof(struct netxen_adapter), GFP_KERNEL); + if (adapter == NULL) { + printk(KERN_ERR "%s: Could not allocate adapter memory:%d\n", + netxen_nic_driver_name, + (int)sizeof(struct netxen_adapter)); + err = -ENOMEM; + goto err_out_iounmap; + } + + adapter->max_tx_desc_count = MAX_CMD_DESCRIPTORS; + adapter->max_rx_desc_count = MAX_RCV_DESCRIPTORS; + adapter->max_jumbo_rx_desc_count = MAX_JUMBO_RCV_DESCRIPTORS; + + pci_set_drvdata(pdev, adapter); + + cmd_buf_arr = (struct netxen_cmd_buffer *)vmalloc(TX_RINGSIZE); + if (cmd_buf_arr == NULL) { + err = -ENOMEM; + goto err_out_free_adapter; + } + memset(cmd_buf_arr, 0, TX_RINGSIZE); + + for (i = 0; i < MAX_RCV_CTX; ++i) { + recv_ctx = &adapter->recv_ctx[i]; + for (ring = 0; ring < NUM_RCV_DESC_RINGS; ring++) { + rcv_desc = &recv_ctx->rcv_desc[ring]; + switch (RCV_DESC_TYPE(ring)) { + case RCV_DESC_NORMAL: + rcv_desc->max_rx_desc_count = + adapter->max_rx_desc_count; + rcv_desc->flags = RCV_DESC_NORMAL; + rcv_desc->dma_size = RX_DMA_MAP_LEN; + rcv_desc->skb_size = MAX_RX_BUFFER_LENGTH; + break; + + case RCV_DESC_JUMBO: + rcv_desc->max_rx_desc_count = + adapter->max_jumbo_rx_desc_count; + rcv_desc->flags = RCV_DESC_JUMBO; + rcv_desc->dma_size = RX_JUMBO_DMA_MAP_LEN; + rcv_desc->skb_size = MAX_RX_JUMBO_BUFFER_LENGTH; + break; + + } + rcv_desc->rx_buf_arr = (struct netxen_rx_buffer *) + vmalloc(RCV_BUFFSIZE); + + if (rcv_desc->rx_buf_arr == NULL) { + err = -ENOMEM; + goto err_out_free_rx_buffer; + } + memset(rcv_desc->rx_buf_arr, 0, RCV_BUFFSIZE); + } + + } + + adapter->ops = kzalloc(sizeof(struct netxen_drvops), GFP_KERNEL); + if (adapter->ops == NULL) { + printk(KERN_ERR + "%s: Could not allocate memory for adapter->ops:%d\n", + netxen_nic_driver_name, + (int)sizeof(struct netxen_adapter)); + err = -ENOMEM; + goto err_out_free_rx_buffer; + } + + adapter->cmd_buf_arr = cmd_buf_arr; + adapter->ahw.pci_base0 = mem_ptr0; + adapter->ahw.pci_base1 = mem_ptr1; + adapter->ahw.pci_base2 = mem_ptr2; + spin_lock_init(&adapter->tx_lock); + spin_lock_init(&adapter->lock); +#ifdef CONFIG_IA64 + netxen_pinit_from_rom(adapter, 0); + udelay(500); + netxen_load_firmware(adapter); +#endif + + /* initialize the buffers in adapter */ + netxen_initialize_adapter_sw(adapter); + /* + * Set the CRB window to invalid. If any register in window 0 is + * accessed it should set the window to 0 and then reset it to 1. + */ + adapter->curr_window = 255; + /* + * Adapter in our case is quad port so initialize it before + * initializing the ports + */ + netxen_initialize_adapter_hw(adapter); /* initialize the adapter */ + + netxen_initialize_adapter_ops(adapter); + + init_timer(&adapter->watchdog_timer); + adapter->ahw.xg_linkup = 0; + adapter->watchdog_timer.function = &netxen_watchdog; + adapter->watchdog_timer.data = (unsigned long)adapter; + INIT_WORK(&adapter->watchdog_task, + (void (*)(void *))netxen_watchdog_task, adapter); + adapter->ahw.pdev = pdev; + adapter->proc_cmd_buf_counter = 0; + pci_read_config_byte(pdev, PCI_REVISION_ID, &adapter->ahw.revision_id); + + if (pci_enable_msi(pdev)) { + adapter->flags &= ~NETXEN_NIC_MSI_ENABLED; + printk(KERN_WARNING "%s: unable to allocate MSI interrupt" + " error\n", netxen_nic_driver_name); + } else + adapter->flags |= NETXEN_NIC_MSI_ENABLED; + + if (netxen_is_flash_supported(adapter) == 0 && + netxen_get_flash_mac_addr(adapter, mac_addr) == 0) + valid_mac = 1; + else + valid_mac = 0; + + /* + * Initialize all the CRB registers here. + */ + writel(0, NETXEN_CRB_NORMALIZE(adapter, CRB_CMD_PRODUCER_OFFSET)); + writel(0, NETXEN_CRB_NORMALIZE(adapter, CRB_CMD_CONSUMER_OFFSET)); + writel(0, NETXEN_CRB_NORMALIZE(adapter, CRB_HOST_CMD_ADDR_LO)); + + /* Unlock the HW, prompting the boot sequence */ + writel(1, + NETXEN_CRB_NORMALIZE(adapter, NETXEN_ROMUSB_GLB_PEGTUNE_DONE)); + + /* Handshake with the card before we register the devices. */ + netxen_phantom_init(adapter, NETXEN_NIC_PEG_TUNE); + + /* initialize the all the ports */ + + for (i = 0; i < adapter->ahw.max_ports; i++) { + netdev = alloc_etherdev(sizeof(struct netxen_port)); + if (!netdev) { + printk(KERN_ERR "%s: could not allocate netdev for port" + " %d\n", netxen_nic_driver_name, i + 1); + goto err_out_free_dev; + } + + SET_MODULE_OWNER(netdev); + SET_NETDEV_DEV(netdev, &pdev->dev); + + port = netdev_priv(netdev); + port->netdev = netdev; + port->pdev = pdev; + port->adapter = adapter; + port->portnum = i; /* Gigabit port number from 0-3 */ + + netdev->open = netxen_nic_open; + netdev->stop = netxen_nic_close; + netdev->hard_start_xmit = netxen_nic_xmit_frame; + netdev->get_stats = netxen_nic_get_stats; + netdev->set_multicast_list = netxen_nic_set_multi; + netdev->set_mac_address = netxen_nic_set_mac; + netdev->change_mtu = netxen_nic_change_mtu; + netdev->do_ioctl = netxen_nic_ioctl; + netdev->tx_timeout = netxen_tx_timeout; + netdev->watchdog_timeo = HZ; + + SET_ETHTOOL_OPS(netdev, &netxen_nic_ethtool_ops); + netdev->poll = netxen_nic_poll; + netdev->weight = NETXEN_NETDEV_WEIGHT; +#ifdef CONFIG_NET_POLL_CONTROLLER + netdev->poll_controller = netxen_nic_poll_controller; +#endif + /* ScatterGather support */ + netdev->features = NETIF_F_SG; + netdev->features |= NETIF_F_IP_CSUM; + netdev->features |= NETIF_F_TSO; + + if (pci_using_dac) + netdev->features |= NETIF_F_HIGHDMA; + + if (valid_mac) { + unsigned char *p = (unsigned char *)&mac_addr[i]; + netdev->dev_addr[0] = *(p + 5); + netdev->dev_addr[1] = *(p + 4); + netdev->dev_addr[2] = *(p + 3); + netdev->dev_addr[3] = *(p + 2); + netdev->dev_addr[4] = *(p + 1); + netdev->dev_addr[5] = *(p + 0); + + memcpy(netdev->perm_addr, netdev->dev_addr, + netdev->addr_len); + if (!is_valid_ether_addr(netdev->perm_addr)) { + printk(KERN_ERR "%s: Bad MAC address " + "%02x:%02x:%02x:%02x:%02x:%02x.\n", + netxen_nic_driver_name, + netdev->dev_addr[0], + netdev->dev_addr[1], + netdev->dev_addr[2], + netdev->dev_addr[3], + netdev->dev_addr[4], + netdev->dev_addr[5]); + } else { + if (adapter->ops->macaddr_set) + adapter->ops->macaddr_set(port, + netdev-> + dev_addr); + } + } + INIT_WORK(&adapter->tx_timeout_task, + (void (*)(void *))netxen_tx_timeout_task, netdev); + netif_carrier_off(netdev); + netif_stop_queue(netdev); + + if ((err = register_netdev(netdev))) { + printk(KERN_ERR "%s: register_netdev failed port #%d" + " aborting\n", netxen_nic_driver_name, i + 1); + err = -EIO; + free_netdev(netdev); + goto err_out_free_dev; + } + adapter->port_count++; + adapter->active_ports = 0; + adapter->port[i] = port; + } + + /* + * delay a while to ensure that the Pegs are up & running. + * Otherwise, we might see some flaky behaviour. + */ + udelay(100); + + switch (adapter->ahw.board_type) { + case NETXEN_NIC_GBE: + printk("%s: QUAD GbE board initialized\n", + netxen_nic_driver_name); + break; + + case NETXEN_NIC_XGBE: + printk("%s: XGbE board initialized\n", netxen_nic_driver_name); + break; + } + + adapter->driver_mismatch = 0; + + return 0; + + err_out_free_dev: + if (adapter->flags & NETXEN_NIC_MSI_ENABLED) + pci_disable_msi(pdev); + for (i = 0; i < adapter->port_count; i++) { + port = adapter->port[i]; + if ((port) && (port->netdev)) { + unregister_netdev(port->netdev); + free_netdev(port->netdev); + } + } + kfree(adapter->ops); + + err_out_free_rx_buffer: + for (i = 0; i < MAX_RCV_CTX; ++i) { + recv_ctx = &adapter->recv_ctx[i]; + for (ring = 0; ring < NUM_RCV_DESC_RINGS; ring++) { + rcv_desc = &recv_ctx->rcv_desc[ring]; + if (rcv_desc->rx_buf_arr != NULL) { + vfree(rcv_desc->rx_buf_arr); + rcv_desc->rx_buf_arr = NULL; + } + } + } + + vfree(cmd_buf_arr); + + kfree(adapter->port); + + err_out_free_adapter: + pci_set_drvdata(pdev, NULL); + kfree(adapter); + + err_out_iounmap: + iounmap(mem_ptr0); + iounmap(mem_ptr1); + iounmap(mem_ptr2); + + err_out_free_res: + pci_release_regions(pdev); + err_out_disable_pdev: + pci_disable_device(pdev); + return err; +} + +static void __devexit netxen_nic_remove(struct pci_dev *pdev) +{ + struct netxen_adapter *adapter; + struct netxen_port *port; + struct netxen_rx_buffer *buffer; + struct netxen_recv_context *recv_ctx; + struct netxen_rcv_desc_ctx *rcv_desc; + int i; + int ctxid, ring; + + adapter = pci_get_drvdata(pdev); + if (adapter == NULL) + return; + + netxen_nic_stop_all_ports(adapter); + /* leave the hw in the same state as reboot */ + netxen_pinit_from_rom(adapter, 0); + udelay(500); + netxen_load_firmware(adapter); + + if ((adapter->flags & NETXEN_NIC_MSI_ENABLED)) + netxen_nic_disable_int(adapter); + + udelay(500); /* Delay for a while to drain the DMA engines */ + for (i = 0; i < adapter->port_count; i++) { + port = adapter->port[i]; + if ((port) && (port->netdev)) { + unregister_netdev(port->netdev); + free_netdev(port->netdev); + } + } + + if ((adapter->flags & NETXEN_NIC_MSI_ENABLED)) + pci_disable_msi(pdev); + pci_set_drvdata(pdev, NULL); + if (adapter->is_up == NETXEN_ADAPTER_UP_MAGIC) + netxen_free_hw_resources(adapter); + + iounmap(adapter->ahw.pci_base0); + iounmap(adapter->ahw.pci_base1); + iounmap(adapter->ahw.pci_base2); + + pci_release_regions(pdev); + pci_disable_device(pdev); + + for (ctxid = 0; ctxid < MAX_RCV_CTX; ++ctxid) { + recv_ctx = &adapter->recv_ctx[ctxid]; + for (ring = 0; ring < NUM_RCV_DESC_RINGS; ring++) { + rcv_desc = &recv_ctx->rcv_desc[ring]; + for (i = 0; i < rcv_desc->max_rx_desc_count; ++i) { + buffer = &(rcv_desc->rx_buf_arr[i]); + if (buffer->state == NETXEN_BUFFER_FREE) + continue; + pci_unmap_single(pdev, buffer->dma, + rcv_desc->dma_size, + PCI_DMA_FROMDEVICE); + if (buffer->skb != NULL) + dev_kfree_skb_any(buffer->skb); + } + vfree(rcv_desc->rx_buf_arr); + } + } + + vfree(adapter->cmd_buf_arr); + kfree(adapter->ops); + kfree(adapter); +} + +/* + * Called when a network interface is made active + * @returns 0 on success, negative value on failure + */ +static int netxen_nic_open(struct net_device *netdev) +{ + struct netxen_port *port = netdev_priv(netdev); + struct netxen_adapter *adapter = port->adapter; + int err = 0; + int ctx, ring; + + if (adapter->is_up != NETXEN_ADAPTER_UP_MAGIC) { + err = netxen_init_firmware(adapter); + if (err != 0) { + printk(KERN_ERR "Failed to init firmware\n"); + return -EIO; + } + netxen_nic_flash_print(adapter); + + /* setup all the resources for the Phantom... */ + /* this include the descriptors for rcv, tx, and status */ + netxen_nic_clear_stats(adapter); + err = netxen_nic_hw_resources(adapter); + if (err) { + printk(KERN_ERR "Error in setting hw resources:%d\n", + err); + return err; + } + if (adapter->ops->init_port + && adapter->ops->init_port(adapter, port->portnum) != 0) { + printk(KERN_ERR "%s: Failed to initialize port %d\n", + netxen_nic_driver_name, port->portnum); + netxen_free_hw_resources(adapter); + return -EIO; + } + if (adapter->ops->init_niu) + adapter->ops->init_niu(adapter); + for (ctx = 0; ctx < MAX_RCV_CTX; ++ctx) { + for (ring = 0; ring < NUM_RCV_DESC_RINGS; ring++) + netxen_post_rx_buffers(adapter, ctx, ring); + } + adapter->is_up = NETXEN_ADAPTER_UP_MAGIC; + } + adapter->active_ports++; + if (adapter->active_ports == 1) { + err = request_irq(adapter->ahw.pdev->irq, &netxen_intr, + SA_SHIRQ | SA_SAMPLE_RANDOM, netdev->name, + adapter); + if (err) { + printk(KERN_ERR "request_irq failed with: %d\n", err); + adapter->active_ports--; + return err; + } + adapter->irq = adapter->ahw.pdev->irq; + if (!adapter->driver_mismatch) + mod_timer(&adapter->watchdog_timer, jiffies); + + netxen_nic_enable_int(adapter); + } + + /* Done here again so that even if phantom sw overwrote it, + * we set it */ + if (adapter->ops->macaddr_set) + adapter->ops->macaddr_set(port, netdev->dev_addr); + netxen_nic_set_link_parameters(port); + + netxen_nic_set_multi(netdev); + if (!adapter->driver_mismatch) + netif_start_queue(netdev); + + return 0; +} + +/* + * netxen_nic_close - Disables a network interface entry point + */ +static int netxen_nic_close(struct net_device *netdev) +{ + struct netxen_port *port = netdev_priv(netdev); + struct netxen_adapter *adapter = port->adapter; + int i, j; + struct netxen_cmd_buffer *cmd_buff; + struct netxen_skb_frag *buffrag; + + netif_carrier_off(netdev); + netif_stop_queue(netdev); + + adapter->active_ports--; + + if (!adapter->active_ports) { + netxen_nic_disable_int(adapter); + if (adapter->irq) + free_irq(adapter->irq, adapter); + cmd_buff = adapter->cmd_buf_arr; + for (i = 0; i < adapter->max_tx_desc_count; i++) { + buffrag = cmd_buff->frag_array; + if (buffrag->dma) { + pci_unmap_single(port->pdev, buffrag->dma, + buffrag->length, + PCI_DMA_TODEVICE); + buffrag->dma = (u64) NULL; + } + for (j = 0; j < cmd_buff->frag_count; j++) { + buffrag++; + if (buffrag->dma) { + pci_unmap_page(port->pdev, + buffrag->dma, + buffrag->length, + PCI_DMA_TODEVICE); + buffrag->dma = (u64) NULL; + } + } + /* Free the skb we received in netxen_nic_xmit_frame */ + if (cmd_buff->skb) { + dev_kfree_skb_any(cmd_buff->skb); + cmd_buff->skb = NULL; + } + cmd_buff++; + } + del_timer_sync(&adapter->watchdog_timer); + } + + return 0; +} + +static int netxen_nic_xmit_frame(struct sk_buff *skb, struct net_device *netdev) +{ + struct netxen_port *port = netdev_priv(netdev); + struct netxen_adapter *adapter = port->adapter; + struct netxen_hardware_context *hw = &adapter->ahw; + unsigned int first_seg_len = skb->len - skb->data_len; + struct netxen_skb_frag *buffrag; + unsigned int i; + + u32 producer = 0; + u32 saved_producer = 0; + struct cmd_desc_type0 *hwdesc; + int k; + struct netxen_cmd_buffer *pbuf = NULL; + unsigned int tries = 0; + static int dropped_packet = 0; + int frag_count; + u32 local_producer = 0; + u32 max_tx_desc_count = 0; + u32 last_cmd_consumer = 0; + int no_of_desc; + + port->stats.xmitcalled++; + frag_count = skb_shinfo(skb)->nr_frags + 1; + + if (unlikely(skb->len <= 0)) { + dev_kfree_skb_any(skb); + port->stats.badskblen++; + return NETDEV_TX_OK; + } + + if (frag_count > MAX_BUFFERS_PER_CMD) { + printk("%s: %s netxen_nic_xmit_frame: frag_count (%d)" + "too large, can handle only %d frags\n", + netxen_nic_driver_name, netdev->name, + frag_count, MAX_BUFFERS_PER_CMD); + port->stats.txdropped++; + if ((++dropped_packet & 0xff) == 0xff) + printk("%s: %s droppped packets = %d\n", + netxen_nic_driver_name, netdev->name, + dropped_packet); + + return NETDEV_TX_OK; + } + + /* + * Everything is set up. Now, we just need to transmit it out. + * Note that we have to copy the contents of buffer over to + * right place. Later on, this can be optimized out by de-coupling the + * producer index from the buffer index. + */ + retry_getting_window: + spin_lock_bh(&adapter->tx_lock); + if (adapter->total_threads == MAX_XMIT_PRODUCERS) { + spin_unlock_bh(&adapter->tx_lock); + /* + * Yield CPU + */ + if (!in_atomic()) + schedule(); + else { + for (i = 0; i < 20; i++) + cpu_relax(); /*This a nop instr on i386 */ + } + goto retry_getting_window; + } + local_producer = adapter->cmd_producer; + /* There 4 fragments per descriptor */ + no_of_desc = (frag_count + 3) >> 2; + if (netdev->features & NETIF_F_TSO) { + if (skb_shinfo(skb)->gso_size > 0) { + + no_of_desc++; + if (((skb->nh.iph)->ihl * sizeof(u32)) + + ((skb->h.th)->doff * sizeof(u32)) + + sizeof(struct ethhdr) > + (sizeof(struct cmd_desc_type0) - NET_IP_ALIGN)) { + no_of_desc++; + } + } + } + k = adapter->cmd_producer; + max_tx_desc_count = adapter->max_tx_desc_count; + last_cmd_consumer = adapter->last_cmd_consumer; + if ((k + no_of_desc) >= + ((last_cmd_consumer <= k) ? last_cmd_consumer + max_tx_desc_count : + last_cmd_consumer)) { + spin_unlock_bh(&adapter->tx_lock); + if (tries == 0) { + local_bh_disable(); + netxen_process_cmd_ring((unsigned long)adapter); + local_bh_enable(); + ++tries; + goto retry_getting_window; + } else { + port->stats.nocmddescriptor++; + DPRINTK(ERR, "No command descriptors available," + " producer = %d, consumer = %d count=%llu," + " dropping packet\n", producer, + adapter->last_cmd_consumer, + port->stats.nocmddescriptor); + + spin_lock_bh(&adapter->tx_lock); + netif_stop_queue(netdev); + port->flags |= NETXEN_NETDEV_STATUS; + spin_unlock_bh(&adapter->tx_lock); + return NETDEV_TX_BUSY; + } + } + k = get_index_range(k, max_tx_desc_count, no_of_desc); + adapter->cmd_producer = k; + adapter->total_threads++; + adapter->num_threads++; + + spin_unlock_bh(&adapter->tx_lock); + /* Copy the descriptors into the hardware */ + producer = local_producer; + saved_producer = producer; + hwdesc = &hw->cmd_desc_head[producer]; + memset(hwdesc, 0, sizeof(struct cmd_desc_type0)); + /* Take skb->data itself */ + pbuf = &adapter->cmd_buf_arr[producer]; + if ((netdev->features & NETIF_F_TSO) && skb_shinfo(skb)->gso_size > 0) { + pbuf->mss = skb_shinfo(skb)->gso_size; + hwdesc->mss = skb_shinfo(skb)->gso_size; + } else { + pbuf->mss = 0; + hwdesc->mss = 0; + } + pbuf->no_of_descriptors = no_of_desc; + pbuf->total_length = skb->len; + pbuf->skb = skb; + pbuf->cmd = TX_ETHER_PKT; + pbuf->frag_count = frag_count; + pbuf->port = port->portnum; + buffrag = &pbuf->frag_array[0]; + buffrag->dma = pci_map_single(port->pdev, skb->data, first_seg_len, + PCI_DMA_TODEVICE); + buffrag->length = first_seg_len; + CMD_DESC_TOTAL_LENGTH_WRT(hwdesc, skb->len); + hwdesc->num_of_buffers = frag_count; + hwdesc->opcode = TX_ETHER_PKT; + + CMD_DESC_PORT_WRT(hwdesc, port->portnum); + hwdesc->buffer1_length = cpu_to_le16(first_seg_len); + hwdesc->addr_buffer1 = cpu_to_le64(buffrag->dma); + + for (i = 1, k = 1; i < frag_count; i++, k++) { + struct skb_frag_struct *frag; + int len, temp_len; + unsigned long offset; + dma_addr_t temp_dma; + + /* move to next desc. if there is a need */ + if ((i & 0x3) == 0) { + k = 0; + producer = get_next_index(producer, + adapter->max_tx_desc_count); + hwdesc = &hw->cmd_desc_head[producer]; + memset(hwdesc, 0, sizeof(struct cmd_desc_type0)); + } + frag = &skb_shinfo(skb)->frags[i - 1]; + len = frag->size; + offset = frag->page_offset; + + temp_len = len; + temp_dma = pci_map_page(port->pdev, frag->page, offset, + len, PCI_DMA_TODEVICE); + + buffrag++; + buffrag->dma = temp_dma; + buffrag->length = temp_len; + + DPRINTK(INFO, "for loop. i=%d k=%d\n", i, k); + switch (k) { + case 0: + hwdesc->buffer1_length = cpu_to_le16(temp_len); + hwdesc->addr_buffer1 = cpu_to_le64(temp_dma); + break; + case 1: + hwdesc->buffer2_length = cpu_to_le16(temp_len); + hwdesc->addr_buffer2 = cpu_to_le64(temp_dma); + break; + case 2: + hwdesc->buffer3_length = cpu_to_le16(temp_len); + hwdesc->addr_buffer3 = cpu_to_le64(temp_dma); + break; + case 3: + hwdesc->buffer4_length = temp_len; + hwdesc->addr_buffer4 = cpu_to_le64(temp_dma); + break; + } + frag++; + } + producer = get_next_index(producer, adapter->max_tx_desc_count); + + /* might change opcode to TX_TCP_LSO */ + netxen_tso_check(adapter, &hw->cmd_desc_head[saved_producer], skb); + + /* For LSO, we need to copy the MAC/IP/TCP headers into + * the descriptor ring + */ + if (hw->cmd_desc_head[saved_producer].opcode == TX_TCP_LSO) { + int hdr_len, first_hdr_len, more_hdr; + hdr_len = hw->cmd_desc_head[saved_producer].total_hdr_length; + if (hdr_len > (sizeof(struct cmd_desc_type0) - NET_IP_ALIGN)) { + first_hdr_len = + sizeof(struct cmd_desc_type0) - NET_IP_ALIGN; + more_hdr = 1; + } else { + first_hdr_len = hdr_len; + more_hdr = 0; + } + /* copy the MAC/IP/TCP headers to the cmd descriptor list */ + hwdesc = &hw->cmd_desc_head[producer]; + + /* copy the first 64 bytes */ + memcpy(((void *)hwdesc) + NET_IP_ALIGN, + (void *)(skb->data), first_hdr_len); + producer = get_next_index(producer, max_tx_desc_count); + + if (more_hdr) { + hwdesc = &hw->cmd_desc_head[producer]; + /* copy the next 64 bytes - should be enough except + * for pathological case + */ + memcpy((void *)hwdesc, (void *)(skb->data) + + first_hdr_len, hdr_len - first_hdr_len); + producer = get_next_index(producer, max_tx_desc_count); + } + } + spin_lock_bh(&adapter->tx_lock); + port->stats.txbytes += + CMD_DESC_TOTAL_LENGTH(&hw->cmd_desc_head[saved_producer]); + /* Code to update the adapter considering how many producer threads + are currently working */ + if ((--adapter->num_threads) == 0) { + /* This is the last thread */ + u32 crb_producer = adapter->cmd_producer; + writel(crb_producer, + NETXEN_CRB_NORMALIZE(adapter, CRB_CMD_PRODUCER_OFFSET)); + wmb(); + adapter->total_threads = 0; + } else { + u32 crb_producer = 0; + crb_producer = + readl(NETXEN_CRB_NORMALIZE + (adapter, CRB_CMD_PRODUCER_OFFSET)); + if (crb_producer == local_producer) { + crb_producer = get_index_range(crb_producer, + max_tx_desc_count, + no_of_desc); + writel(crb_producer, + NETXEN_CRB_NORMALIZE(adapter, + CRB_CMD_PRODUCER_OFFSET)); + wmb(); + } + } + + port->stats.xmitfinished++; + spin_unlock_bh(&adapter->tx_lock); + + netdev->trans_start = jiffies; + + DPRINTK(INFO, "wrote CMD producer %x to phantom\n", producer); + + DPRINTK(INFO, "Done. Send\n"); + return NETDEV_TX_OK; +} + +static void netxen_watchdog(unsigned long v) +{ + struct netxen_adapter *adapter = (struct netxen_adapter *)v; + schedule_work(&adapter->watchdog_task); +} + +static void netxen_tx_timeout(struct net_device *netdev) +{ + struct netxen_port *port = (struct netxen_port *)netdev_priv(netdev); + struct netxen_adapter *adapter = port->adapter; + + schedule_work(&adapter->tx_timeout_task); +} + +static void netxen_tx_timeout_task(struct net_device *netdev) +{ + struct netxen_port *port = (struct netxen_port *)netdev_priv(netdev); + unsigned long flags; + + printk(KERN_ERR "%s %s: transmit timeout, resetting.\n", + netxen_nic_driver_name, netdev->name); + + spin_lock_irqsave(&port->adapter->lock, flags); + netxen_nic_close(netdev); + netxen_nic_open(netdev); + spin_unlock_irqrestore(&port->adapter->lock, flags); + netdev->trans_start = jiffies; + netif_wake_queue(netdev); +} + +static int +netxen_handle_int(struct netxen_adapter *adapter, struct net_device *netdev) +{ + u32 ret = 0; + + DPRINTK(INFO, "Entered handle ISR\n"); + + adapter->stats.ints++; + + if (!(adapter->flags & NETXEN_NIC_MSI_ENABLED)) { + int count = 0; + u32 mask; + netxen_nic_disable_int(adapter); + /* Window = 0 or 1 */ + do { + writel(0xffffffff, PCI_OFFSET_SECOND_RANGE(adapter, + ISR_INT_TARGET_STATUS)); + mask = readl(pci_base_offset(adapter, ISR_INT_VECTOR)); + } while (((mask & 0x80) != 0) && (++count < 32)); + if ((mask & 0x80) != 0) + printk("Could not disable interrupt completely\n"); + + } + adapter->stats.hostints++; + + if (netxen_nic_rx_has_work(adapter) || netxen_nic_tx_has_work(adapter)) { + if (netif_rx_schedule_prep(netdev)) { + /* + * Interrupts are already disabled. + */ + __netif_rx_schedule(netdev); + } else { + static unsigned int intcount = 0; + if ((++intcount & 0xfff) == 0xfff) + printk(KERN_ERR + "%s: %s interrupt %d while in poll\n", + netxen_nic_driver_name, netdev->name, + intcount); + } + ret = 1; + } + + if (ret == 0) { + netxen_nic_enable_int(adapter); + } + + return ret; +} + +/* + * netxen_intr - Interrupt Handler + * @irq: interrupt number + * data points to adapter stucture (which may be handling more than 1 port + */ +irqreturn_t netxen_intr(int irq, void *data) +{ + struct netxen_adapter *adapter; + struct netxen_port *port; + struct net_device *netdev; + int i; + + if (unlikely(!irq)) { + return IRQ_NONE; /* Not our interrupt */ + } + + adapter = (struct netxen_adapter *)data; + for (i = 0; i < adapter->ahw.max_ports; i++) { + port = adapter->port[i]; + netdev = port->netdev; + + /* process our status queue (for all 4 ports) */ + netxen_handle_int(adapter, netdev); + } + + return IRQ_HANDLED; +} + +static int netxen_nic_poll(struct net_device *netdev, int *budget) +{ + struct netxen_port *port = (struct netxen_port *)netdev_priv(netdev); + struct netxen_adapter *adapter = port->adapter; + int work_to_do = min(*budget, netdev->quota); + int done = 1; + int ctx; + int this_work_done; + + DPRINTK(INFO, "polling for %d descriptors\n", *budget); + port->stats.polled++; + + adapter->work_done = 0; + for (ctx = 0; ctx < MAX_RCV_CTX; ++ctx) { + /* + * Fairness issue. This will give undue weight to the + * receive context 0. + */ + + /* + * To avoid starvation, we give each of our receivers, + * a fraction of the quota. Sometimes, it might happen that we + * have enough quota to process every packet, but since all the + * packets are on one context, it gets only half of the quota, + * and ends up not processing it. + */ + this_work_done = netxen_process_rcv_ring(adapter, ctx, + work_to_do / + MAX_RCV_CTX); + adapter->work_done += this_work_done; + } + + netdev->quota -= adapter->work_done; + *budget -= adapter->work_done; + + if (adapter->work_done >= work_to_do + && netxen_nic_rx_has_work(adapter) != 0) + done = 0; + + netxen_process_cmd_ring((unsigned long)adapter); + + DPRINTK(INFO, "new work_done: %d work_to_do: %d\n", + adapter->work_done, work_to_do); + if (done) { + netif_rx_complete(netdev); + netxen_nic_enable_int(adapter); + } + + return !done; +} + +#ifdef CONFIG_NET_POLL_CONTROLLER +static void netxen_nic_poll_controller(struct net_device *netdev) +{ + struct netxen_port *port = netdev_priv(netdev); + struct netxen_adapter *adapter = port->adapter; + disable_irq(adapter->irq); + netxen_intr(adapter->irq, adapter); + enable_irq(adapter->irq); +} +#endif +/* + * netxen_nic_ioctl () We provide the tcl/phanmon support through these + * ioctls. + */ +static int +netxen_nic_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) +{ + int err = 0; + unsigned long nr_bytes = 0; + struct netxen_port *port = netdev_priv(netdev); + struct netxen_adapter *adapter = port->adapter; + char dev_name[NETXEN_NIC_NAME_LEN]; + + DPRINTK(INFO, "doing ioctl for %s\n", netdev->name); + switch (cmd) { + case NETXEN_NIC_CMD: + err = netxen_nic_do_ioctl(adapter, (void *)ifr->ifr_data, port); + break; + + case NETXEN_NIC_NAME: + DPRINTK(INFO, "ioctl cmd for NetXen\n"); + if (ifr->ifr_data) { + sprintf(dev_name, "%s-%d", NETXEN_NIC_NAME_RSP, + port->portnum); + nr_bytes = copy_to_user((char *)ifr->ifr_data, dev_name, + NETXEN_NIC_NAME_LEN); + if (nr_bytes) + err = -EIO; + + } + break; + + default: + DPRINTK(INFO, "ioctl cmd %x not supported\n", cmd); + err = -EOPNOTSUPP; + break; + } + + return err; +} + +static struct pci_driver netxen_driver = { + .name = netxen_nic_driver_name, + .id_table = netxen_pci_tbl, + .probe = netxen_nic_probe, + .remove = __devexit_p(netxen_nic_remove) +}; + +/* Driver Registration on NetXen card */ + +static int __init netxen_init_module(void) +{ + return pci_module_init(&netxen_driver); +} + +module_init(netxen_init_module); + +static void __exit netxen_exit_module(void) +{ + /* + * Wait for some time to allow the dma to drain, if any. + */ + mdelay(5); + pci_unregister_driver(&netxen_driver); +} + +module_exit(netxen_exit_module); diff --git a/drivers/net/netxen/netxen_nic_niu.c b/drivers/net/netxen/netxen_nic_niu.c new file mode 100644 index 00000000000..7950a04532e --- /dev/null +++ b/drivers/net/netxen/netxen_nic_niu.c @@ -0,0 +1,894 @@ +/* + * Copyright (C) 2003 - 2006 NetXen, Inc. + * All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, + * MA 02111-1307, USA. + * + * The full GNU General Public License is included in this distribution + * in the file called LICENSE. + * + * Contact Information: + * info@netxen.com + * NetXen, + * 3965 Freedom Circle, Fourth floor, + * Santa Clara, CA 95054 + * + * + * Provides access to the Network Interface Unit h/w block. + * + */ + +#include "netxen_nic.h" + +#define NETXEN_GB_MAC_SOFT_RESET 0x80000000 +#define NETXEN_GB_MAC_RESET_PROT_BLK 0x000F0000 +#define NETXEN_GB_MAC_ENABLE_TX_RX 0x00000005 +#define NETXEN_GB_MAC_PAUSED_FRMS 0x00000020 + +static long phy_lock_timeout = 100000000; + +static inline int phy_lock(void) +{ + int i; + int done = 0, timeout = 0; + + while (!done) { + done = readl((void __iomem *)NETXEN_PCIE_REG(PCIE_SEM3_LOCK)); + if (done == 1) + break; + if (timeout >= phy_lock_timeout) { + return -1; + } + timeout++; + if (!in_atomic()) + schedule(); + else { + for (i = 0; i < 20; i++) + cpu_relax(); + } + } + + writel(NETXEN_PHY_LOCK_ID, (void __iomem *)PHY_LOCK_DRIVER); + return 0; +} + +static inline int phy_unlock(void) +{ + readl((void __iomem *)NETXEN_PCIE_REG(PCIE_SEM3_UNLOCK)); + return 0; +} + +/* + * netxen_niu_gbe_phy_read - read a register from the GbE PHY via + * mii management interface. + * + * Note: The MII management interface goes through port 0. + * Individual phys are addressed as follows: + * @param phy [15:8] phy id + * @param reg [7:0] register number + * + * @returns 0 on success + * -1 on error + * + */ +int netxen_niu_gbe_phy_read(struct netxen_adapter *adapter, long phy, + long reg, __le32 * readval) +{ + long timeout = 0; + long result = 0; + long restore = 0; + __le32 address; + __le32 command; + __le32 status; + __le32 mac_cfg0; + + if (phy_lock() != 0) { + return -1; + } + + /* + * MII mgmt all goes through port 0 MAC interface, + * so it cannot be in reset + */ + + if (netxen_nic_hw_read_wx(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(0), + &mac_cfg0, 4)) + return -EIO; + if (netxen_gb_get_soft_reset(mac_cfg0)) { + __le32 temp; + temp = 0; + netxen_gb_tx_reset_pb(temp); + netxen_gb_rx_reset_pb(temp); + netxen_gb_tx_reset_mac(temp); + netxen_gb_rx_reset_mac(temp); + if (netxen_nic_hw_write_wx(adapter, + NETXEN_NIU_GB_MAC_CONFIG_0(0), + &temp, 4)) + return -EIO; + restore = 1; + } + + address = 0; + netxen_gb_mii_mgmt_reg_addr(address, reg); + netxen_gb_mii_mgmt_phy_addr(address, phy); + if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_GB_MII_MGMT_ADDR(0), + &address, 4)) + return -EIO; + command = 0; /* turn off any prior activity */ + if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_GB_MII_MGMT_COMMAND(0), + &command, 4)) + return -EIO; + /* send read command */ + netxen_gb_mii_mgmt_set_read_cycle(command); + if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_GB_MII_MGMT_COMMAND(0), + &command, 4)) + return -EIO; + + status = 0; + do { + if (netxen_nic_hw_read_wx(adapter, + NETXEN_NIU_GB_MII_MGMT_INDICATE(0), + &status, 4)) + return -EIO; + timeout++; + } while ((netxen_get_gb_mii_mgmt_busy(status) + || netxen_get_gb_mii_mgmt_notvalid(status)) + && (timeout++ < NETXEN_NIU_PHY_WAITMAX)); + + if (timeout < NETXEN_NIU_PHY_WAITMAX) { + if (netxen_nic_hw_read_wx(adapter, + NETXEN_NIU_GB_MII_MGMT_STATUS(0), + readval, 4)) + return -EIO; + result = 0; + } else + result = -1; + + if (restore) + if (netxen_nic_hw_write_wx(adapter, + NETXEN_NIU_GB_MAC_CONFIG_0(0), + &mac_cfg0, 4)) + return -EIO; + phy_unlock(); + return result; +} + +/* + * netxen_niu_gbe_phy_write - write a register to the GbE PHY via + * mii management interface. + * + * Note: The MII management interface goes through port 0. + * Individual phys are addressed as follows: + * @param phy [15:8] phy id + * @param reg [7:0] register number + * + * @returns 0 on success + * -1 on error + * + */ +int netxen_niu_gbe_phy_write(struct netxen_adapter *adapter, + long phy, long reg, __le32 val) +{ + long timeout = 0; + long result = 0; + long restore = 0; + __le32 address; + __le32 command; + __le32 status; + __le32 mac_cfg0; + + /* + * MII mgmt all goes through port 0 MAC interface, so it + * cannot be in reset + */ + + if (netxen_nic_hw_read_wx(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(0), + &mac_cfg0, 4)) + return -EIO; + if (netxen_gb_get_soft_reset(mac_cfg0)) { + __le32 temp; + temp = 0; + netxen_gb_tx_reset_pb(temp); + netxen_gb_rx_reset_pb(temp); + netxen_gb_tx_reset_mac(temp); + netxen_gb_rx_reset_mac(temp); + + if (netxen_nic_hw_write_wx(adapter, + NETXEN_NIU_GB_MAC_CONFIG_0(0), + &temp, 4)) + return -EIO; + restore = 1; + } + + command = 0; /* turn off any prior activity */ + if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_GB_MII_MGMT_COMMAND(0), + &command, 4)) + return -EIO; + + address = 0; + netxen_gb_mii_mgmt_reg_addr(address, reg); + netxen_gb_mii_mgmt_phy_addr(address, phy); + if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_GB_MII_MGMT_ADDR(0), + &address, 4)) + return -EIO; + + if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_GB_MII_MGMT_CTRL(0), + &val, 4)) + return -EIO; + + status = 0; + do { + if (netxen_nic_hw_read_wx(adapter, + NETXEN_NIU_GB_MII_MGMT_INDICATE(0), + &status, 4)) + return -EIO; + timeout++; + } while ((netxen_get_gb_mii_mgmt_busy(status)) + && (timeout++ < NETXEN_NIU_PHY_WAITMAX)); + + if (timeout < NETXEN_NIU_PHY_WAITMAX) + result = 0; + else + result = -EIO; + + /* restore the state of port 0 MAC in case we tampered with it */ + if (restore) + if (netxen_nic_hw_write_wx(adapter, + NETXEN_NIU_GB_MAC_CONFIG_0(0), + &mac_cfg0, 4)) + return -EIO; + + return result; +} + +int netxen_niu_xgbe_enable_phy_interrupts(struct netxen_adapter *adapter, + int port) +{ + netxen_crb_writelit_adapter(adapter, NETXEN_NIU_INT_MASK, 0x3f); + return 0; +} + +int netxen_niu_gbe_enable_phy_interrupts(struct netxen_adapter *adapter, + int port) +{ + int result = 0; + __le32 enable = 0; + netxen_set_phy_int_link_status_changed(enable); + netxen_set_phy_int_autoneg_completed(enable); + netxen_set_phy_int_speed_changed(enable); + + if (0 != + netxen_niu_gbe_phy_write(adapter, port, + NETXEN_NIU_GB_MII_MGMT_ADDR_INT_ENABLE, + enable)) + result = -EIO; + + return result; +} + +int netxen_niu_xgbe_disable_phy_interrupts(struct netxen_adapter *adapter, + int port) +{ + netxen_crb_writelit_adapter(adapter, NETXEN_NIU_INT_MASK, 0x7f); + return 0; +} + +int netxen_niu_gbe_disable_phy_interrupts(struct netxen_adapter *adapter, + int port) +{ + int result = 0; + if (0 != + netxen_niu_gbe_phy_write(adapter, port, + NETXEN_NIU_GB_MII_MGMT_ADDR_INT_ENABLE, 0)) + result = -EIO; + + return result; +} + +int netxen_niu_xgbe_clear_phy_interrupts(struct netxen_adapter *adapter, + int port) +{ + netxen_crb_writelit_adapter(adapter, NETXEN_NIU_ACTIVE_INT, -1); + return 0; +} + +int netxen_niu_gbe_clear_phy_interrupts(struct netxen_adapter *adapter, + int port) +{ + int result = 0; + if (0 != + netxen_niu_gbe_phy_write(adapter, port, + NETXEN_NIU_GB_MII_MGMT_ADDR_INT_STATUS, + -EIO)) + result = -EIO; + + return result; +} + +/* + * netxen_niu_gbe_set_mii_mode- Set 10/100 Mbit Mode for GbE MAC + * + */ +void netxen_niu_gbe_set_mii_mode(struct netxen_adapter *adapter, + int port, long enable) +{ + netxen_crb_writelit_adapter(adapter, NETXEN_NIU_MODE, 0x2); + netxen_crb_writelit_adapter(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port), + 0x80000000); + netxen_crb_writelit_adapter(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port), + 0x0000f0025); + netxen_crb_writelit_adapter(adapter, NETXEN_NIU_GB_MAC_CONFIG_1(port), + 0xf1ff); + netxen_crb_writelit_adapter(adapter, + NETXEN_NIU_GB0_GMII_MODE + (port << 3), 0); + netxen_crb_writelit_adapter(adapter, + NETXEN_NIU_GB0_MII_MODE + (port << 3), 1); + netxen_crb_writelit_adapter(adapter, + (NETXEN_NIU_GB0_HALF_DUPLEX + port * 4), 0); + netxen_crb_writelit_adapter(adapter, + NETXEN_NIU_GB_MII_MGMT_CONFIG(port), 0x7); + + if (enable) { + /* + * Do NOT enable flow control until a suitable solution for + * shutting down pause frames is found. + */ + netxen_crb_writelit_adapter(adapter, + NETXEN_NIU_GB_MAC_CONFIG_0(port), + 0x5); + } + + if (netxen_niu_gbe_enable_phy_interrupts(adapter, port)) + printk(KERN_ERR PFX "ERROR enabling PHY interrupts\n"); + if (netxen_niu_gbe_clear_phy_interrupts(adapter, port)) + printk(KERN_ERR PFX "ERROR clearing PHY interrupts\n"); +} + +/* + * netxen_niu_gbe_set_gmii_mode- Set GbE Mode for GbE MAC + */ +void netxen_niu_gbe_set_gmii_mode(struct netxen_adapter *adapter, + int port, long enable) +{ + netxen_crb_writelit_adapter(adapter, NETXEN_NIU_MODE, 0x2); + netxen_crb_writelit_adapter(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port), + 0x80000000); + netxen_crb_writelit_adapter(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port), + 0x0000f0025); + netxen_crb_writelit_adapter(adapter, NETXEN_NIU_GB_MAC_CONFIG_1(port), + 0xf2ff); + netxen_crb_writelit_adapter(adapter, + NETXEN_NIU_GB0_MII_MODE + (port << 3), 0); + netxen_crb_writelit_adapter(adapter, + NETXEN_NIU_GB0_GMII_MODE + (port << 3), 1); + netxen_crb_writelit_adapter(adapter, + (NETXEN_NIU_GB0_HALF_DUPLEX + port * 4), 0); + netxen_crb_writelit_adapter(adapter, + NETXEN_NIU_GB_MII_MGMT_CONFIG(port), 0x7); + + if (enable) { + /* + * Do NOT enable flow control until a suitable solution for + * shutting down pause frames is found. + */ + netxen_crb_writelit_adapter(adapter, + NETXEN_NIU_GB_MAC_CONFIG_0(port), + 0x5); + } + + if (netxen_niu_gbe_enable_phy_interrupts(adapter, port)) + printk(KERN_ERR PFX "ERROR enabling PHY interrupts\n"); + if (netxen_niu_gbe_clear_phy_interrupts(adapter, port)) + printk(KERN_ERR PFX "ERROR clearing PHY interrupts\n"); +} + +int netxen_niu_gbe_init_port(struct netxen_adapter *adapter, int port) +{ + int result = 0; + __le32 status; + if (adapter->ops->disable_phy_interrupts) + adapter->ops->disable_phy_interrupts(adapter, port); + mdelay(2); + + if (0 == + netxen_niu_gbe_phy_read(adapter, port, + NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_STATUS, + (__le32 *) & status)) { + if (netxen_get_phy_link(status)) { + if (netxen_get_phy_speed(status) == 2) { + netxen_niu_gbe_set_gmii_mode(adapter, port, 1); + } else if ((netxen_get_phy_speed(status) == 1) + || (netxen_get_phy_speed(status) == 0)) { + netxen_niu_gbe_set_mii_mode(adapter, port, 1); + } else { + result = -1; + } + + } else { + /* + * We don't have link. Cable must be unconnected. + * Enable phy interrupts so we take action when + * plugged in. + */ + + netxen_crb_writelit_adapter(adapter, + NETXEN_NIU_GB_MAC_CONFIG_0 + (port), + NETXEN_GB_MAC_SOFT_RESET); + netxen_crb_writelit_adapter(adapter, + NETXEN_NIU_GB_MAC_CONFIG_0 + (port), + NETXEN_GB_MAC_RESET_PROT_BLK + | NETXEN_GB_MAC_ENABLE_TX_RX + | + NETXEN_GB_MAC_PAUSED_FRMS); + if (netxen_niu_gbe_clear_phy_interrupts(adapter, port)) + printk(KERN_ERR PFX + "ERROR clearing PHY interrupts\n"); + if (netxen_niu_gbe_enable_phy_interrupts(adapter, port)) + printk(KERN_ERR PFX + "ERROR enabling PHY interrupts\n"); + if (netxen_niu_gbe_clear_phy_interrupts(adapter, port)) + printk(KERN_ERR PFX + "ERROR clearing PHY interrupts\n"); + result = -1; + } + } else { + result = -EIO; + } + return result; +} + +int netxen_niu_xg_init_port(struct netxen_adapter *adapter, int port) +{ + long reg = 0, ret = 0; + + if (adapter->ahw.boardcfg.board_type == NETXEN_BRDTYPE_P2_SB31_10G_IMEZ) { + netxen_crb_writelit_adapter(adapter, + NETXEN_NIU_XG1_CONFIG_0, 0x5); + /* XXX hack for Mez cards: both ports in promisc mode */ + netxen_nic_hw_read_wx(adapter, + NETXEN_NIU_XGE_CONFIG_1, ®, 4); + reg = (reg | 0x2000UL); + netxen_crb_writelit_adapter(adapter, + NETXEN_NIU_XGE_CONFIG_1, reg); + reg = 0; + netxen_nic_hw_read_wx(adapter, + NETXEN_NIU_XG1_CONFIG_1, ®, 4); + reg = (reg | 0x2000UL); + netxen_crb_writelit_adapter(adapter, + NETXEN_NIU_XG1_CONFIG_1, reg); + } + + return ret; +} + +/* + * netxen_niu_gbe_handle_phy_interrupt - Handles GbE PHY interrupts + * @param enable 0 means don't enable the port + * 1 means enable (or re-enable) the port + */ +int netxen_niu_gbe_handle_phy_interrupt(struct netxen_adapter *adapter, + int port, long enable) +{ + int result = 0; + __le32 int_src; + + printk(KERN_INFO PFX "NETXEN: Handling PHY interrupt on port %d" + " (device enable = %d)\n", (int)port, (int)enable); + + /* + * The read of the PHY INT status will clear the pending + * interrupt status + */ + if (netxen_niu_gbe_phy_read(adapter, port, + NETXEN_NIU_GB_MII_MGMT_ADDR_INT_STATUS, + &int_src) != 0) + result = -EINVAL; + else { + printk(KERN_INFO PFX "PHY Interrupt source = 0x%x \n", int_src); + if (netxen_get_phy_int_jabber(int_src)) + printk(KERN_INFO PFX "jabber Interrupt "); + if (netxen_get_phy_int_polarity_changed(int_src)) + printk(KERN_INFO PFX "polarity changed "); + if (netxen_get_phy_int_energy_detect(int_src)) + printk(KERN_INFO PFX "energy detect \n"); + if (netxen_get_phy_int_downshift(int_src)) + printk(KERN_INFO PFX "downshift \n"); + if (netxen_get_phy_int_mdi_xover_changed(int_src)) + printk(KERN_INFO PFX "mdi_xover_changed "); + if (netxen_get_phy_int_fifo_over_underflow(int_src)) + printk(KERN_INFO PFX "fifo_over_underflow "); + if (netxen_get_phy_int_false_carrier(int_src)) + printk(KERN_INFO PFX "false_carrier "); + if (netxen_get_phy_int_symbol_error(int_src)) + printk(KERN_INFO PFX "symbol_error "); + if (netxen_get_phy_int_autoneg_completed(int_src)) + printk(KERN_INFO PFX "autoneg_completed "); + if (netxen_get_phy_int_page_received(int_src)) + printk(KERN_INFO PFX "page_received "); + if (netxen_get_phy_int_duplex_changed(int_src)) + printk(KERN_INFO PFX "duplex_changed "); + if (netxen_get_phy_int_autoneg_error(int_src)) + printk(KERN_INFO PFX "autoneg_error "); + if ((netxen_get_phy_int_speed_changed(int_src)) + || (netxen_get_phy_int_link_status_changed(int_src))) { + __le32 status; + + printk(KERN_INFO PFX + "speed_changed or link status changed"); + if (netxen_niu_gbe_phy_read + (adapter, port, + NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_STATUS, + &status) == 0) { + if (netxen_get_phy_speed(status) == 2) { + printk + (KERN_INFO PFX "Link speed changed" + " to 1000 Mbps\n"); + netxen_niu_gbe_set_gmii_mode(adapter, + port, + enable); + } else if (netxen_get_phy_speed(status) == 1) { + printk + (KERN_INFO PFX "Link speed changed" + " to 100 Mbps\n"); + netxen_niu_gbe_set_mii_mode(adapter, + port, + enable); + } else if (netxen_get_phy_speed(status) == 0) { + printk + (KERN_INFO PFX "Link speed changed" + " to 10 Mbps\n"); + netxen_niu_gbe_set_mii_mode(adapter, + port, + enable); + } else { + printk(KERN_ERR PFX "ERROR reading" + "PHY status. Illegal speed.\n"); + result = -1; + } + } else { + printk(KERN_ERR PFX + "ERROR reading PHY status.\n"); + result = -1; + } + + } + printk(KERN_INFO "\n"); + } + return result; +} + +/* + * Return the current station MAC address. + * Note that the passed-in value must already be in network byte order. + */ +int netxen_niu_macaddr_get(struct netxen_adapter *adapter, + int phy, netxen_ethernet_macaddr_t * addr) +{ + u64 result = 0; + __le32 stationhigh; + __le32 stationlow; + + if (addr == NULL) + return -EINVAL; + if ((phy < 0) || (phy > 3)) + return -EINVAL; + + if (netxen_nic_hw_read_wx(adapter, NETXEN_NIU_GB_STATION_ADDR_0(phy), + &stationhigh, 4)) + return -EIO; + if (netxen_nic_hw_read_wx(adapter, NETXEN_NIU_GB_STATION_ADDR_1(phy), + &stationlow, 4)) + return -EIO; + + result = (u64) netxen_gb_get_stationaddress_low(stationlow); + result |= (u64) stationhigh << 16; + memcpy(*addr, &result, sizeof(netxen_ethernet_macaddr_t)); + + return 0; +} + +/* + * Set the station MAC address. + * Note that the passed-in value must already be in network byte order. + */ +int netxen_niu_macaddr_set(struct netxen_port *port, + netxen_ethernet_macaddr_t addr) +{ + __le32 temp = 0; + struct netxen_adapter *adapter = port->adapter; + int phy = port->portnum; + unsigned char mac_addr[MAX_ADDR_LEN]; + int i; + + for (i = 0; i < 10; i++) { + memcpy(&temp, addr, 2); + temp <<= 16; + if (netxen_nic_hw_write_wx + (adapter, NETXEN_NIU_GB_STATION_ADDR_1(phy), &temp, 4)) + return -EIO; + + temp = 0; + + memcpy(&temp, ((u8 *) addr) + 2, sizeof(__le32)); + if (netxen_nic_hw_write_wx + (adapter, NETXEN_NIU_GB_STATION_ADDR_0(phy), &temp, 4)) + return -2; + + netxen_niu_macaddr_get(adapter, phy, + (netxen_ethernet_macaddr_t *) mac_addr); + if (memcmp(mac_addr, addr, MAX_ADDR_LEN == 0)) + break; + } + + if (i == 10) { + printk(KERN_ERR "%s: cannot set Mac addr for %s\n", + netxen_nic_driver_name, port->netdev->name); + printk(KERN_ERR "MAC address set: " + "%02x:%02x:%02x:%02x:%02x:%02x.\n", + addr[0], addr[1], addr[2], addr[3], addr[4], addr[5]); + + printk(KERN_ERR "MAC address get: " + "%02x:%02x:%02x:%02x:%02x:%02x.\n", + mac_addr[0], + mac_addr[1], + mac_addr[2], mac_addr[3], mac_addr[4], mac_addr[5]); + } + return 0; +} + +/* Enable a GbE interface */ +int netxen_niu_enable_gbe_port(struct netxen_adapter *adapter, + int port, netxen_niu_gbe_ifmode_t mode) +{ + __le32 mac_cfg0; + __le32 mac_cfg1; + __le32 mii_cfg; + + if ((port < 0) || (port > NETXEN_NIU_MAX_GBE_PORTS)) + return -EINVAL; + + mac_cfg0 = 0; + netxen_gb_soft_reset(mac_cfg0); + if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port), + &mac_cfg0, 4)) + return -EIO; + mac_cfg0 = 0; + netxen_gb_enable_tx(mac_cfg0); + netxen_gb_enable_rx(mac_cfg0); + netxen_gb_unset_rx_flowctl(mac_cfg0); + netxen_gb_tx_reset_pb(mac_cfg0); + netxen_gb_rx_reset_pb(mac_cfg0); + netxen_gb_tx_reset_mac(mac_cfg0); + netxen_gb_rx_reset_mac(mac_cfg0); + + if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port), + &mac_cfg0, 4)) + return -EIO; + mac_cfg1 = 0; + netxen_gb_set_preamblelen(mac_cfg1, 0xf); + netxen_gb_set_duplex(mac_cfg1); + netxen_gb_set_crc_enable(mac_cfg1); + netxen_gb_set_padshort(mac_cfg1); + netxen_gb_set_checklength(mac_cfg1); + netxen_gb_set_hugeframes(mac_cfg1); + + if (mode == NETXEN_NIU_10_100_MB) { + netxen_gb_set_intfmode(mac_cfg1, 1); + if (netxen_nic_hw_write_wx(adapter, + NETXEN_NIU_GB_MAC_CONFIG_1(port), + &mac_cfg1, 4)) + return -EIO; + + /* set mii mode */ + netxen_crb_writelit_adapter(adapter, NETXEN_NIU_GB0_GMII_MODE + + (port << 3), 0); + netxen_crb_writelit_adapter(adapter, NETXEN_NIU_GB0_MII_MODE + + (port << 3), 1); + + } else if (mode == NETXEN_NIU_1000_MB) { + netxen_gb_set_intfmode(mac_cfg1, 2); + if (netxen_nic_hw_write_wx(adapter, + NETXEN_NIU_GB_MAC_CONFIG_1(port), + &mac_cfg1, 4)) + return -EIO; + /* set gmii mode */ + netxen_crb_writelit_adapter(adapter, NETXEN_NIU_GB0_MII_MODE + + (port << 3), 0); + netxen_crb_writelit_adapter(adapter, NETXEN_NIU_GB0_GMII_MODE + + (port << 3), 1); + } + mii_cfg = 0; + netxen_gb_set_mii_mgmt_clockselect(mii_cfg, 7); + if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_GB_MII_MGMT_CONFIG(port), + &mii_cfg, 4)) + return -EIO; + mac_cfg0 = 0; + netxen_gb_enable_tx(mac_cfg0); + netxen_gb_enable_rx(mac_cfg0); + netxen_gb_unset_rx_flowctl(mac_cfg0); + netxen_gb_unset_tx_flowctl(mac_cfg0); + + if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port), + &mac_cfg0, 4)) + return -EIO; + return 0; +} + +/* Disable a GbE interface */ +int netxen_niu_disable_gbe_port(struct netxen_adapter *adapter, int port) +{ + __le32 mac_cfg0; + + if ((port < 0) || (port > NETXEN_NIU_MAX_GBE_PORTS)) + return -EINVAL; + + mac_cfg0 = 0; + netxen_gb_soft_reset(mac_cfg0); + if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port), + &mac_cfg0, 4)) + return -EIO; + return 0; +} + +/* Disable an XG interface */ +int netxen_niu_disable_xg_port(struct netxen_adapter *adapter, int port) +{ + __le32 mac_cfg; + + if (port != 0) + return -EINVAL; + + mac_cfg = 0; + netxen_xg_soft_reset(mac_cfg); + if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_XGE_CONFIG_0, + &mac_cfg, 4)) + return -EIO; + return 0; +} + +/* Set promiscuous mode for a GbE interface */ +int netxen_niu_set_promiscuous_mode(struct netxen_adapter *adapter, int port, + netxen_niu_prom_mode_t mode) +{ + __le32 reg; + + if ((port < 0) || (port > NETXEN_NIU_MAX_GBE_PORTS)) + return -EINVAL; + + /* save previous contents */ + if (netxen_nic_hw_read_wx(adapter, NETXEN_NIU_GB_DROP_WRONGADDR, + ®, 4)) + return -EIO; + if (mode == NETXEN_NIU_PROMISC_MODE) { + switch (port) { + case 0: + netxen_clear_gb_drop_gb0(reg); + break; + case 1: + netxen_clear_gb_drop_gb1(reg); + break; + case 2: + netxen_clear_gb_drop_gb2(reg); + break; + case 3: + netxen_clear_gb_drop_gb3(reg); + break; + default: + return -EIO; + } + } else { + switch (port) { + case 0: + netxen_set_gb_drop_gb0(reg); + break; + case 1: + netxen_set_gb_drop_gb1(reg); + break; + case 2: + netxen_set_gb_drop_gb2(reg); + break; + case 3: + netxen_set_gb_drop_gb3(reg); + break; + default: + return -EIO; + } + } + if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_GB_DROP_WRONGADDR, + ®, 4)) + return -EIO; + return 0; +} + +/* + * Set the MAC address for an XG port + * Note that the passed-in value must already be in network byte order. + */ +int netxen_niu_xg_macaddr_set(struct netxen_port *port, + netxen_ethernet_macaddr_t addr) +{ + __le32 temp = 0; + struct netxen_adapter *adapter = port->adapter; + + memcpy(&temp, addr, 2); + temp = cpu_to_le32(temp); + temp <<= 16; + if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_XGE_STATION_ADDR_0_1, + &temp, 4)) + return -EIO; + + temp = 0; + + memcpy(&temp, ((u8 *) addr) + 2, sizeof(__le32)); + temp = cpu_to_le32(temp); + if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_XGE_STATION_ADDR_0_HI, + &temp, 4)) + return -EIO; + + return 0; +} + +/* + * Return the current station MAC address. + * Note that the passed-in value must already be in network byte order. + */ +int netxen_niu_xg_macaddr_get(struct netxen_adapter *adapter, int phy, + netxen_ethernet_macaddr_t * addr) +{ + __le32 stationhigh; + __le32 stationlow; + u64 result; + + if (addr == NULL) + return -EINVAL; + if (phy != 0) + return -EINVAL; + + if (netxen_nic_hw_read_wx(adapter, NETXEN_NIU_XGE_STATION_ADDR_0_HI, + &stationhigh, 4)) + return -EIO; + if (netxen_nic_hw_read_wx(adapter, NETXEN_NIU_XGE_STATION_ADDR_0_1, + &stationlow, 4)) + return -EIO; + + result = ((u64) stationlow) >> 16; + result |= (u64) stationhigh << 16; + memcpy(*addr, &result, sizeof(netxen_ethernet_macaddr_t)); + + return 0; +} + +int netxen_niu_xg_set_promiscuous_mode(struct netxen_adapter *adapter, + int port, netxen_niu_prom_mode_t mode) +{ + __le32 reg; + + if ((port < 0) || (port > NETXEN_NIU_MAX_GBE_PORTS)) + return -EINVAL; + + if (netxen_nic_hw_read_wx(adapter, NETXEN_NIU_XGE_CONFIG_1, ®, 4)) + return -EIO; + if (mode == NETXEN_NIU_PROMISC_MODE) + reg = (reg | 0x2000UL); + else + reg = (reg & ~0x2000UL); + + netxen_crb_writelit_adapter(adapter, NETXEN_NIU_XGE_CONFIG_1, reg); + + return 0; +} diff --git a/drivers/net/netxen/netxen_nic_phan_reg.h b/drivers/net/netxen/netxen_nic_phan_reg.h new file mode 100644 index 00000000000..8181d436783 --- /dev/null +++ b/drivers/net/netxen/netxen_nic_phan_reg.h @@ -0,0 +1,215 @@ +/* + * Copyright (C) 2003 - 2006 NetXen, Inc. + * All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, + * MA 02111-1307, USA. + * + * The full GNU General Public License is included in this distribution + * in the file called LICENSE. + * + * Contact Information: + * info@netxen.com + * NetXen, + * 3965 Freedom Circle, Fourth floor, + * Santa Clara, CA 95054 + */ + +#ifndef __NIC_PHAN_REG_H_ +#define __NIC_PHAN_REG_H_ + +/* + * CRB Registers or queue message done only at initialization time. + */ + +/* + * The following 2 are the base adresses for the CRB registers and their + * offsets will be added to get addresses for the index addresses. + */ +#define NIC_CRB_BASE_PORT1 NETXEN_CAM_RAM(0x200) +#define NIC_CRB_BASE_PORT2 NETXEN_CAM_RAM(0x250) + +#define NETXEN_NIC_REG(X) (NIC_CRB_BASE_PORT1+(X)) + +/* + * CrbPortPhanCntrHi/Lo is used to pass the address of HostPhantomIndex address + * which can be read by the Phantom host to get producer/consumer indexes from + * Phantom/Casper. If it is not HOST_SHARED_MEMORY, then the following + * registers will be used for the addresses of the ring's shared memory + * on the Phantom. + */ + +#define CRB_PHAN_CNTRL_LO_OFFSET NETXEN_NIC_REG(0x00) +#define CRB_PHAN_CNTRL_HI_OFFSET NETXEN_NIC_REG(0x04) + +/* point to the indexes */ +#define CRB_CMD_PRODUCER_OFFSET NETXEN_NIC_REG(0x08) +#define CRB_CMD_CONSUMER_OFFSET NETXEN_NIC_REG(0x0c) + +#define CRB_PAUSE_ADDR_LO NETXEN_NIC_REG(0x10) +#define CRB_PAUSE_ADDR_HI NETXEN_NIC_REG(0x14) + +/* address of command descriptors in the host memory */ +#define CRB_HOST_CMD_ADDR_HI NETXEN_NIC_REG(0x30) +#define CRB_HOST_CMD_ADDR_LO NETXEN_NIC_REG(0x34) + +/* The following 4 CRB registers are for doing performance coal */ +#define CRB_CMD_INTR_LOOP NETXEN_NIC_REG(0x38) +#define CRB_CMD_DMA_LOOP NETXEN_NIC_REG(0x3c) +#define CRB_RCV_INTR_LOOP NETXEN_NIC_REG(0x40) +#define CRB_RCV_DMA_LOOP NETXEN_NIC_REG(0x44) + +/* Needed by the host to find out the state of Phantom's initialization */ +#define CRB_ENABLE_TX_INTR NETXEN_NIC_REG(0x4c) +#define CRB_CMDPEG_STATE NETXEN_NIC_REG(0x50) +#define CRB_CMDPEG_CMDRING NETXEN_NIC_REG(0x54) + +/* Interrupt coalescing parameters */ +#define CRB_GLOBAL_INT_COAL NETXEN_NIC_REG(0x80) +#define CRB_INT_COAL_MODE NETXEN_NIC_REG(0x84) +#define CRB_MAX_RCV_BUFS NETXEN_NIC_REG(0x88) +#define CRB_TX_INT_THRESHOLD NETXEN_NIC_REG(0x8c) +#define CRB_RX_PKT_TIMER NETXEN_NIC_REG(0x90) +#define CRB_TX_PKT_TIMER NETXEN_NIC_REG(0x94) +#define CRB_RX_PKT_CNT NETXEN_NIC_REG(0x98) +#define CRB_RX_TMR_CNT NETXEN_NIC_REG(0x9c) +#define CRB_INT_THRESH NETXEN_NIC_REG(0xa4) + +/* Register for communicating XG link status */ +#define CRB_XG_STATE NETXEN_NIC_REG(0xa0) + +/* Register for communicating card temperature */ +/* Upper 16 bits are temperature value. Lower 16 bits are the state */ +#define CRB_TEMP_STATE NETXEN_NIC_REG(0xa8) +#define nx_get_temp_val(x) ((x) >> 16) +#define nx_get_temp_state(x) ((x) & 0xffff) +#define nx_encode_temp(val, state) (((val) << 16) | (state)) + +/* Debug registers for controlling NIC pkt gen agent */ +#define CRB_AGENT_GO NETXEN_NIC_REG(0xb0) +#define CRB_AGENT_TX_SIZE NETXEN_NIC_REG(0xb4) +#define CRB_AGENT_TX_TYPE NETXEN_NIC_REG(0xb8) +#define CRB_AGENT_TX_ADDR NETXEN_NIC_REG(0xbc) +#define CRB_AGENT_TX_MSS NETXEN_NIC_REG(0xc0) + +/* Debug registers for observing NIC performance */ +#define CRB_TX_STATE NETXEN_NIC_REG(0xd0) +#define CRB_TX_COUNT NETXEN_NIC_REG(0xd4) +#define CRB_RX_STATE NETXEN_NIC_REG(0xd8) + +/* CRB registers per Rcv Descriptor ring */ +struct netxen_rcv_desc_crb { + u32 crb_rcv_producer_offset __attribute__ ((aligned(512))); + u32 crb_rcv_consumer_offset; + u32 crb_globalrcv_ring; +}; + +/* + * CRB registers used by the receive peg logic. One instance of these + * needs to be instantiated per instance of the receive peg. + */ + +struct netxen_recv_crb { + struct netxen_rcv_desc_crb rcv_desc_crb[NUM_RCV_DESC_RINGS]; + u32 crb_rcvstatus_ring; + u32 crb_rcv_status_producer; + u32 crb_rcv_status_consumer; + u32 crb_rcvpeg_state; +}; + +#if defined(DEFINE_GLOBAL_RECV_CRB) +struct netxen_recv_crb recv_crb_registers[] = { + /* + * Instance 0. + */ + { + /* rcv_desc_crb: */ + { + { + /* crb_rcv_producer_offset: */ + NETXEN_NIC_REG(0x18), + /* crb_rcv_consumer_offset: */ + NETXEN_NIC_REG(0x1c), + /* crb_gloablrcv_ring: */ + NETXEN_NIC_REG(0x20), + }, + /* Jumbo frames */ + { + /* crb_rcv_producer_offset: */ + NETXEN_NIC_REG(0x100), + /* crb_rcv_consumer_offset: */ + NETXEN_NIC_REG(0x104), + /* crb_gloablrcv_ring: */ + NETXEN_NIC_REG(0x108), + } + }, + /* crb_rcvstatus_ring: */ + NETXEN_NIC_REG(0x24), + /* crb_rcv_status_producer: */ + NETXEN_NIC_REG(0x28), + /* crb_rcv_status_consumer: */ + NETXEN_NIC_REG(0x2c), + /* crb_rcvpeg_state: */ + NETXEN_NIC_REG(0x48), + + }, + /* + * Instance 1, + */ + { + /* rcv_desc_crb: */ + { + { + /* crb_rcv_producer_offset: */ + NETXEN_NIC_REG(0x80), + /* crb_rcv_consumer_offset: */ + NETXEN_NIC_REG(0x84), + /* crb_globalrcv_ring: */ + NETXEN_NIC_REG(0x88), + }, + /* Jumbo frames */ + { + /* crb_rcv_producer_offset: */ + NETXEN_NIC_REG(0x10C), + /* crb_rcv_consumer_offset: */ + NETXEN_NIC_REG(0x110), + /* crb_globalrcv_ring: */ + NETXEN_NIC_REG(0x114), + } + }, + /* crb_rcvstatus_ring: */ + NETXEN_NIC_REG(0x8c), + /* crb_rcv_status_producer: */ + NETXEN_NIC_REG(0x90), + /* crb_rcv_status_consumer: */ + NETXEN_NIC_REG(0x94), + /* crb_rcvpeg_state: */ + NETXEN_NIC_REG(0x98), + }, +}; +#else +extern struct netxen_recv_crb recv_crb_registers[]; +#endif /* DEFINE_GLOBAL_RECEIVE_CRB */ + +/* + * Temperature control. + */ +enum { + NX_TEMP_NORMAL = 0x1, /* Normal operating range */ + NX_TEMP_WARN, /* Sound alert, temperature getting high */ + NX_TEMP_PANIC /* Fatal error, hardware has shut down. */ +}; + +#endif /* __NIC_PHAN_REG_H_ */ diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c index 0c00d182e7f..c51cc5d8789 100644 --- a/drivers/net/pcmcia/pcnet_cs.c +++ b/drivers/net/pcmcia/pcnet_cs.c @@ -1096,7 +1096,6 @@ static void ei_watchdog(u_long arg) /* Check for pending interrupt with expired latency timer: with this, we can limp along even if the interrupt is blocked */ - outb_p(E8390_NODMA+E8390_PAGE0, nic_base + E8390_CMD); if (info->stale++ && (inb_p(nic_base + EN0_ISR) & ENISR_ALL)) { if (!info->fast_poll) printk(KERN_INFO "%s: interrupt(s) dropped!\n", dev->name); diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index b79ec0d7480..f994f129f3d 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -56,13 +56,19 @@ config SMSC_PHY ---help--- Currently supports the LAN83C185 PHY +config BROADCOM_PHY + tristate "Drivers for Broadcom PHYs" + depends on PHYLIB + ---help--- + Currently supports the BCM5411, BCM5421 and BCM5461 PHYs. + config FIXED_PHY tristate "Drivers for PHY emulation on fixed speed/link" depends on PHYLIB ---help--- Adds the driver to PHY layer to cover the boards that do not have any PHY bound, - but with the ability to manipulate with speed/link in software. The relavant MII - speed/duplex parameters could be effectively handled in user-specified fuction. + but with the ability to manipulate the speed/link in software. The relevant MII + speed/duplex parameters could be effectively handled in a user-specified function. Currently tested with mpc866ads. config FIXED_MII_10_FDX diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile index 320f8323123..bcd1efbd2a1 100644 --- a/drivers/net/phy/Makefile +++ b/drivers/net/phy/Makefile @@ -10,4 +10,5 @@ obj-$(CONFIG_LXT_PHY) += lxt.o obj-$(CONFIG_QSEMI_PHY) += qsemi.o obj-$(CONFIG_SMSC_PHY) += smsc.o obj-$(CONFIG_VITESSE_PHY) += vitesse.o +obj-$(CONFIG_BROADCOM_PHY) += broadcom.o obj-$(CONFIG_FIXED_PHY) += fixed.o diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c new file mode 100644 index 00000000000..29666c85ed5 --- /dev/null +++ b/drivers/net/phy/broadcom.c @@ -0,0 +1,175 @@ +/* + * drivers/net/phy/broadcom.c + * + * Broadcom BCM5411, BCM5421 and BCM5461 Gigabit Ethernet + * transceivers. + * + * Copyright (c) 2006 Maciej W. Rozycki + * + * Inspired by code written by Amy Fong. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/module.h> +#include <linux/phy.h> + +#define MII_BCM54XX_ECR 0x10 /* BCM54xx extended control register */ +#define MII_BCM54XX_ECR_IM 0x1000 /* Interrupt mask */ +#define MII_BCM54XX_ECR_IF 0x0800 /* Interrupt force */ + +#define MII_BCM54XX_ESR 0x11 /* BCM54xx extended status register */ +#define MII_BCM54XX_ESR_IS 0x1000 /* Interrupt status */ + +#define MII_BCM54XX_ISR 0x1a /* BCM54xx interrupt status register */ +#define MII_BCM54XX_IMR 0x1b /* BCM54xx interrupt mask register */ +#define MII_BCM54XX_INT_CRCERR 0x0001 /* CRC error */ +#define MII_BCM54XX_INT_LINK 0x0002 /* Link status changed */ +#define MII_BCM54XX_INT_SPEED 0x0004 /* Link speed change */ +#define MII_BCM54XX_INT_DUPLEX 0x0008 /* Duplex mode changed */ +#define MII_BCM54XX_INT_LRS 0x0010 /* Local receiver status changed */ +#define MII_BCM54XX_INT_RRS 0x0020 /* Remote receiver status changed */ +#define MII_BCM54XX_INT_SSERR 0x0040 /* Scrambler synchronization error */ +#define MII_BCM54XX_INT_UHCD 0x0080 /* Unsupported HCD negotiated */ +#define MII_BCM54XX_INT_NHCD 0x0100 /* No HCD */ +#define MII_BCM54XX_INT_NHCDL 0x0200 /* No HCD link */ +#define MII_BCM54XX_INT_ANPR 0x0400 /* Auto-negotiation page received */ +#define MII_BCM54XX_INT_LC 0x0800 /* All counters below 128 */ +#define MII_BCM54XX_INT_HC 0x1000 /* Counter above 32768 */ +#define MII_BCM54XX_INT_MDIX 0x2000 /* MDIX status change */ +#define MII_BCM54XX_INT_PSERR 0x4000 /* Pair swap error */ + +MODULE_DESCRIPTION("Broadcom PHY driver"); +MODULE_AUTHOR("Maciej W. Rozycki"); +MODULE_LICENSE("GPL"); + +static int bcm54xx_config_init(struct phy_device *phydev) +{ + int reg, err; + + reg = phy_read(phydev, MII_BCM54XX_ECR); + if (reg < 0) + return reg; + + /* Mask interrupts globally. */ + reg |= MII_BCM54XX_ECR_IM; + err = phy_write(phydev, MII_BCM54XX_ECR, reg); + if (err < 0) + return err; + + /* Unmask events we are interested in. */ + reg = ~(MII_BCM54XX_INT_DUPLEX | + MII_BCM54XX_INT_SPEED | + MII_BCM54XX_INT_LINK); + err = phy_write(phydev, MII_BCM54XX_IMR, reg); + if (err < 0) + return err; + return 0; +} + +static int bcm54xx_ack_interrupt(struct phy_device *phydev) +{ + int reg; + + /* Clear pending interrupts. */ + reg = phy_read(phydev, MII_BCM54XX_ISR); + if (reg < 0) + return reg; + + return 0; +} + +static int bcm54xx_config_intr(struct phy_device *phydev) +{ + int reg, err; + + reg = phy_read(phydev, MII_BCM54XX_ECR); + if (reg < 0) + return reg; + + if (phydev->interrupts == PHY_INTERRUPT_ENABLED) + reg &= ~MII_BCM54XX_ECR_IM; + else + reg |= MII_BCM54XX_ECR_IM; + + err = phy_write(phydev, MII_BCM54XX_ECR, reg); + return err; +} + +static struct phy_driver bcm5411_driver = { + .phy_id = 0x00206070, + .phy_id_mask = 0xfffffff0, + .name = "Broadcom BCM5411", + .features = PHY_GBIT_FEATURES, + .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, + .config_init = bcm54xx_config_init, + .config_aneg = genphy_config_aneg, + .read_status = genphy_read_status, + .ack_interrupt = bcm54xx_ack_interrupt, + .config_intr = bcm54xx_config_intr, + .driver = { .owner = THIS_MODULE }, +}; + +static struct phy_driver bcm5421_driver = { + .phy_id = 0x002060e0, + .phy_id_mask = 0xfffffff0, + .name = "Broadcom BCM5421", + .features = PHY_GBIT_FEATURES, + .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, + .config_init = bcm54xx_config_init, + .config_aneg = genphy_config_aneg, + .read_status = genphy_read_status, + .ack_interrupt = bcm54xx_ack_interrupt, + .config_intr = bcm54xx_config_intr, + .driver = { .owner = THIS_MODULE }, +}; + +static struct phy_driver bcm5461_driver = { + .phy_id = 0x002060c0, + .phy_id_mask = 0xfffffff0, + .name = "Broadcom BCM5461", + .features = PHY_GBIT_FEATURES, + .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, + .config_init = bcm54xx_config_init, + .config_aneg = genphy_config_aneg, + .read_status = genphy_read_status, + .ack_interrupt = bcm54xx_ack_interrupt, + .config_intr = bcm54xx_config_intr, + .driver = { .owner = THIS_MODULE }, +}; + +static int __init broadcom_init(void) +{ + int ret; + + ret = phy_driver_register(&bcm5411_driver); + if (ret) + goto out_5411; + ret = phy_driver_register(&bcm5421_driver); + if (ret) + goto out_5421; + ret = phy_driver_register(&bcm5461_driver); + if (ret) + goto out_5461; + return ret; + +out_5461: + phy_driver_unregister(&bcm5421_driver); +out_5421: + phy_driver_unregister(&bcm5411_driver); +out_5411: + return ret; +} + +static void __exit broadcom_exit(void) +{ + phy_driver_unregister(&bcm5461_driver); + phy_driver_unregister(&bcm5421_driver); + phy_driver_unregister(&bcm5411_driver); +} + +module_init(broadcom_init); +module_exit(broadcom_exit); diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index a443976d5dc..4044bb1ada8 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -7,6 +7,7 @@ * Author: Andy Fleming * * Copyright (c) 2004 Freescale Semiconductor, Inc. + * Copyright (c) 2006 Maciej W. Rozycki * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -32,6 +33,8 @@ #include <linux/mii.h> #include <linux/ethtool.h> #include <linux/phy.h> +#include <linux/timer.h> +#include <linux/workqueue.h> #include <asm/io.h> #include <asm/irq.h> @@ -484,6 +487,9 @@ static irqreturn_t phy_interrupt(int irq, void *phy_dat) { struct phy_device *phydev = phy_dat; + if (PHY_HALTED == phydev->state) + return IRQ_NONE; /* It can't be ours. */ + /* The MDIO bus is not allowed to be written in interrupt * context, so we need to disable the irq here. A work * queue will write the PHY to disable and clear the @@ -577,6 +583,13 @@ int phy_stop_interrupts(struct phy_device *phydev) if (err) phy_error(phydev); + /* + * Finish any pending work; we might have been scheduled + * to be called from keventd ourselves, though. + */ + if (!current_is_keventd()) + flush_scheduled_work(); + free_irq(phydev->irq, phydev); return err; @@ -604,7 +617,8 @@ static void phy_change(struct work_struct *work) enable_irq(phydev->irq); /* Reenable interrupts */ - err = phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED); + if (PHY_HALTED != phydev->state) + err = phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED); if (err) goto irq_enable_err; @@ -625,18 +639,24 @@ void phy_stop(struct phy_device *phydev) if (PHY_HALTED == phydev->state) goto out_unlock; - if (phydev->irq != PHY_POLL) { - /* Clear any pending interrupts */ - phy_clear_interrupt(phydev); + phydev->state = PHY_HALTED; + if (phydev->irq != PHY_POLL) { /* Disable PHY Interrupts */ phy_config_interrupt(phydev, PHY_INTERRUPT_DISABLED); - } - phydev->state = PHY_HALTED; + /* Clear any pending interrupts */ + phy_clear_interrupt(phydev); + } out_unlock: spin_unlock(&phydev->lock); + + /* + * Cannot call flush_scheduled_work() here as desired because + * of rtnl_lock(), but PHY_HALTED shall guarantee phy_change() + * will not reenable interrupts. + */ } @@ -694,60 +714,57 @@ static void phy_timer(unsigned long data) break; case PHY_AN: + err = phy_read_status(phydev); + + if (err < 0) + break; + + /* If the link is down, give up on + * negotiation for now */ + if (!phydev->link) { + phydev->state = PHY_NOLINK; + netif_carrier_off(phydev->attached_dev); + phydev->adjust_link(phydev->attached_dev); + break; + } + /* Check if negotiation is done. Break * if there's an error */ err = phy_aneg_done(phydev); if (err < 0) break; - /* If auto-negotiation is done, we change to - * either RUNNING, or NOLINK */ + /* If AN is done, we're running */ if (err > 0) { - err = phy_read_status(phydev); + phydev->state = PHY_RUNNING; + netif_carrier_on(phydev->attached_dev); + phydev->adjust_link(phydev->attached_dev); + + } else if (0 == phydev->link_timeout--) { + int idx; - if (err) + needs_aneg = 1; + /* If we have the magic_aneg bit, + * we try again */ + if (phydev->drv->flags & PHY_HAS_MAGICANEG) break; - if (phydev->link) { - phydev->state = PHY_RUNNING; - netif_carrier_on(phydev->attached_dev); - } else { - phydev->state = PHY_NOLINK; - netif_carrier_off(phydev->attached_dev); - } + /* The timer expired, and we still + * don't have a setting, so we try + * forcing it until we find one that + * works, starting from the fastest speed, + * and working our way down */ + idx = phy_find_valid(0, phydev->supported); - phydev->adjust_link(phydev->attached_dev); + phydev->speed = settings[idx].speed; + phydev->duplex = settings[idx].duplex; - } else if (0 == phydev->link_timeout--) { - /* The counter expired, so either we - * switch to forced mode, or the - * magic_aneg bit exists, and we try aneg - * again */ - if (!(phydev->drv->flags & PHY_HAS_MAGICANEG)) { - int idx; - - /* We'll start from the - * fastest speed, and work - * our way down */ - idx = phy_find_valid(0, - phydev->supported); - - phydev->speed = settings[idx].speed; - phydev->duplex = settings[idx].duplex; - - phydev->autoneg = AUTONEG_DISABLE; - phydev->state = PHY_FORCING; - phydev->link_timeout = - PHY_FORCE_TIMEOUT; - - pr_info("Trying %d/%s\n", - phydev->speed, - DUPLEX_FULL == - phydev->duplex ? - "FULL" : "HALF"); - } + phydev->autoneg = AUTONEG_DISABLE; - needs_aneg = 1; + pr_info("Trying %d/%s\n", phydev->speed, + DUPLEX_FULL == + phydev->duplex ? + "FULL" : "HALF"); } break; case PHY_NOLINK: @@ -763,7 +780,7 @@ static void phy_timer(unsigned long data) } break; case PHY_FORCING: - err = phy_read_status(phydev); + err = genphy_update_link(phydev); if (err) break; diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index 3bbd5e70c20..b01fc70a57d 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -59,6 +59,7 @@ struct phy_device* phy_device_create(struct mii_bus *bus, int addr, int phy_id) dev->duplex = -1; dev->pause = dev->asym_pause = 0; dev->link = 1; + dev->interface = PHY_INTERFACE_MODE_GMII; dev->autoneg = AUTONEG_ENABLE; @@ -137,11 +138,12 @@ void phy_prepare_link(struct phy_device *phydev, * the desired functionality. */ struct phy_device * phy_connect(struct net_device *dev, const char *phy_id, - void (*handler)(struct net_device *), u32 flags) + void (*handler)(struct net_device *), u32 flags, + u32 interface) { struct phy_device *phydev; - phydev = phy_attach(dev, phy_id, flags); + phydev = phy_attach(dev, phy_id, flags, interface); if (IS_ERR(phydev)) return phydev; @@ -186,7 +188,7 @@ static int phy_compare_id(struct device *dev, void *data) } struct phy_device *phy_attach(struct net_device *dev, - const char *phy_id, u32 flags) + const char *phy_id, u32 flags, u32 interface) { struct bus_type *bus = &mdio_bus_type; struct phy_device *phydev; @@ -231,6 +233,20 @@ struct phy_device *phy_attach(struct net_device *dev, phydev->dev_flags = flags; + phydev->interface = interface; + + /* Do initial configuration here, now that + * we have certain key parameters + * (dev_flags and interface) */ + if (phydev->drv->config_init) { + int err; + + err = phydev->drv->config_init(phydev); + + if (err < 0) + return ERR_PTR(err); + } + return phydev; } EXPORT_SYMBOL(phy_attach); @@ -427,6 +443,7 @@ int genphy_update_link(struct phy_device *phydev) return 0; } +EXPORT_SYMBOL(genphy_update_link); /* genphy_read_status * @@ -611,13 +628,8 @@ static int phy_probe(struct device *dev) spin_unlock(&phydev->lock); - if (err < 0) - return err; - - if (phydev->drv->config_init) - err = phydev->drv->config_init(phydev); - return err; + } static int phy_remove(struct device *dev) diff --git a/drivers/net/ppp_generic.c b/drivers/net/ppp_generic.c index f5802e7b08e..c6de566188e 100644 --- a/drivers/net/ppp_generic.c +++ b/drivers/net/ppp_generic.c @@ -860,7 +860,7 @@ static int __init ppp_init(void) err = PTR_ERR(ppp_class); goto out_chrdev; } - class_device_create(ppp_class, NULL, MKDEV(PPP_MAJOR, 0), NULL, "ppp"); + device_create(ppp_class, NULL, MKDEV(PPP_MAJOR, 0), "ppp"); } out: @@ -2675,7 +2675,7 @@ static void __exit ppp_cleanup(void) cardmap_destroy(&all_ppp_units); if (unregister_chrdev(PPP_MAJOR, "ppp") != 0) printk(KERN_ERR "PPP: failed to unregister PPP device\n"); - class_device_destroy(ppp_class, MKDEV(PPP_MAJOR, 0)); + device_destroy(ppp_class, MKDEV(PPP_MAJOR, 0)); class_destroy(ppp_class); } diff --git a/drivers/net/pppoe.c b/drivers/net/pppoe.c index 0adee733b76..315d5c3fc66 100644 --- a/drivers/net/pppoe.c +++ b/drivers/net/pppoe.c @@ -393,7 +393,7 @@ static int pppoe_rcv(struct sk_buff *skb, po = get_item((unsigned long) ph->sid, eth_hdr(skb)->h_source); if (po != NULL) - return sk_receive_skb(sk_pppox(po), skb); + return sk_receive_skb(sk_pppox(po), skb, 0); drop: kfree_skb(skb); out: diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index 1f9663a7082..85a392fab5c 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -572,8 +572,8 @@ static void rtl8169_xmii_reset_enable(void __iomem *ioaddr) { unsigned int val; - val = (mdio_read(ioaddr, MII_BMCR) | BMCR_RESET) & 0xffff; - mdio_write(ioaddr, MII_BMCR, val); + mdio_write(ioaddr, MII_BMCR, BMCR_RESET); + val = mdio_read(ioaddr, MII_BMCR); } static void rtl8169_check_link_status(struct net_device *dev, @@ -1407,6 +1407,22 @@ static void rtl8169_release_board(struct pci_dev *pdev, struct net_device *dev, free_netdev(dev); } +static void rtl8169_phy_reset(struct net_device *dev, + struct rtl8169_private *tp) +{ + void __iomem *ioaddr = tp->mmio_addr; + int i; + + tp->phy_reset_enable(ioaddr); + for (i = 0; i < 100; i++) { + if (!tp->phy_reset_pending(ioaddr)) + return; + msleep(1); + } + if (netif_msg_link(tp)) + printk(KERN_ERR "%s: PHY reset failed.\n", dev->name); +} + static void rtl8169_init_phy(struct net_device *dev, struct rtl8169_private *tp) { void __iomem *ioaddr = tp->mmio_addr; @@ -1435,6 +1451,8 @@ static void rtl8169_init_phy(struct net_device *dev, struct rtl8169_private *tp) rtl8169_link_option(board_idx, &autoneg, &speed, &duplex); + rtl8169_phy_reset(dev, tp); + rtl8169_set_speed(dev, autoneg, speed, duplex); if ((RTL_R8(PHYstatus) & TBI_Enable) && netif_msg_link(tp)) @@ -1474,8 +1492,8 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) struct rtl8169_private *tp; struct net_device *dev; void __iomem *ioaddr; - unsigned int i, pm_cap; - int rc; + unsigned int pm_cap; + int i, rc; if (netif_msg_drv(&debug)) { printk(KERN_INFO "%s Gigabit Ethernet driver %s loaded\n", diff --git a/drivers/net/sk98lin/h/skdrv2nd.h b/drivers/net/sk98lin/h/skdrv2nd.h index 778d9e618eb..3fa67171e83 100644 --- a/drivers/net/sk98lin/h/skdrv2nd.h +++ b/drivers/net/sk98lin/h/skdrv2nd.h @@ -160,7 +160,7 @@ struct s_IOCTL { /* ** Interim definition of SK_DRV_TIMER placed in this file until -** common modules have boon finallized +** common modules have been finalized */ #define SK_DRV_TIMER 11 #define SK_DRV_MODERATION_TIMER 1 diff --git a/drivers/net/sk98lin/skdim.c b/drivers/net/sk98lin/skdim.c index 07c1b4c8699..37ce03fb8de 100644 --- a/drivers/net/sk98lin/skdim.c +++ b/drivers/net/sk98lin/skdim.c @@ -252,7 +252,7 @@ SkDimEnableModerationIfNeeded(SK_AC *pAC) { /******************************************************************************* ** Function : SkDimDisplayModerationSettings -** Description : Displays the current settings regaring interrupt moderation +** Description : Displays the current settings regarding interrupt moderation ** Programmer : Ralph Roesler ** Last Modified: 22-mar-03 ** Returns : void (!) @@ -510,7 +510,7 @@ EnableIntMod(SK_AC *pAC) { /******************************************************************************* ** Function : DisableIntMod() -** Description : Disbles the interrupt moderation independent of what inter- +** Description : Disables the interrupt moderation independent of what inter- ** rupts are running or not ** Programmer : Ralph Roesler ** Last Modified: 23-mar-03 diff --git a/drivers/net/sk98lin/skethtool.c b/drivers/net/sk98lin/skethtool.c index e5cb5b548b8..36460694eb8 100644 --- a/drivers/net/sk98lin/skethtool.c +++ b/drivers/net/sk98lin/skethtool.c @@ -581,6 +581,30 @@ static int setRxCsum(struct net_device *dev, u32 data) return 0; } +static int getRegsLen(struct net_device *dev) +{ + return 0x4000; +} + +/* + * Returns copy of whole control register region + * Note: skip RAM address register because accessing it will + * cause bus hangs! + */ +static void getRegs(struct net_device *dev, struct ethtool_regs *regs, + void *p) +{ + DEV_NET *pNet = netdev_priv(dev); + const void __iomem *io = pNet->pAC->IoBase; + + regs->version = 1; + memset(p, 0, regs->len); + memcpy_fromio(p, io, B3_RAM_ADDR); + + memcpy_fromio(p + B3_RI_WTO_R1, io + B3_RI_WTO_R1, + regs->len - B3_RI_WTO_R1); +} + const struct ethtool_ops SkGeEthtoolOps = { .get_settings = getSettings, .set_settings = setSettings, @@ -599,4 +623,6 @@ const struct ethtool_ops SkGeEthtoolOps = { .set_tx_csum = setTxCsum, .get_rx_csum = getRxCsum, .set_rx_csum = setRxCsum, + .get_regs = getRegs, + .get_regs_len = getRegsLen, }; diff --git a/drivers/net/sk98lin/skge.c b/drivers/net/sk98lin/skge.c index d4913c3de2a..12cbfd190dd 100644 --- a/drivers/net/sk98lin/skge.c +++ b/drivers/net/sk98lin/skge.c @@ -113,6 +113,7 @@ #include <linux/init.h> #include <linux/dma-mapping.h> #include <linux/ip.h> +#include <linux/mii.h> #include "h/skdrv1st.h" #include "h/skdrv2nd.h" @@ -1561,7 +1562,7 @@ struct sk_buff *pMessage) /* pointer to send-message */ if (pMessage->ip_summed == CHECKSUM_PARTIAL) { u16 hdrlen = pMessage->h.raw - pMessage->data; - u16 offset = hdrlen + pMessage->csum; + u16 offset = hdrlen + pMessage->csum_offset; if ((pMessage->h.ipiph->protocol == IPPROTO_UDP ) && (pAC->GIni.GIChipRev == 0) && @@ -1680,7 +1681,7 @@ struct sk_buff *pMessage) /* pointer to send-message */ */ if (pMessage->ip_summed == CHECKSUM_PARTIAL) { u16 hdrlen = pMessage->h.raw - pMessage->data; - u16 offset = hdrlen + pMessage->csum; + u16 offset = hdrlen + pMessage->csum_offset; Control = BMU_STFWD; @@ -2843,6 +2844,56 @@ unsigned long Flags; /* for spin lock */ return(&pAC->stats); } /* SkGeStats */ +/* + * Basic MII register access + */ +static int SkGeMiiIoctl(struct net_device *dev, + struct mii_ioctl_data *data, int cmd) +{ + DEV_NET *pNet = netdev_priv(dev); + SK_AC *pAC = pNet->pAC; + SK_IOC IoC = pAC->IoBase; + int Port = pNet->PortNr; + SK_GEPORT *pPrt = &pAC->GIni.GP[Port]; + unsigned long Flags; + int err = 0; + int reg = data->reg_num & 0x1f; + SK_U16 val = data->val_in; + + if (!netif_running(dev)) + return -ENODEV; /* Phy still in reset */ + + spin_lock_irqsave(&pAC->SlowPathLock, Flags); + switch(cmd) { + case SIOCGMIIPHY: + data->phy_id = pPrt->PhyAddr; + + /* fallthru */ + case SIOCGMIIREG: + if (pAC->GIni.GIGenesis) + SkXmPhyRead(pAC, IoC, Port, reg, &val); + else + SkGmPhyRead(pAC, IoC, Port, reg, &val); + + data->val_out = val; + break; + + case SIOCSMIIREG: + if (!capable(CAP_NET_ADMIN)) + err = -EPERM; + + else if (pAC->GIni.GIGenesis) + SkXmPhyWrite(pAC, IoC, Port, reg, val); + else + SkGmPhyWrite(pAC, IoC, Port, reg, val); + break; + default: + err = -EOPNOTSUPP; + } + spin_unlock_irqrestore(&pAC->SlowPathLock, Flags); + return err; +} + /***************************************************************************** * @@ -2876,6 +2927,9 @@ int HeaderLength = sizeof(SK_U32) + sizeof(SK_U32); pNet = netdev_priv(dev); pAC = pNet->pAC; + if (cmd == SIOCGMIIPHY || cmd == SIOCSMIIREG || cmd == SIOCGMIIREG) + return SkGeMiiIoctl(dev, if_mii(rq), cmd); + if(copy_from_user(&Ioctl, rq->ifr_data, sizeof(SK_GE_IOCTL))) { return -EFAULT; } diff --git a/drivers/net/skge.c b/drivers/net/skge.c index 3b67614372a..b60f0451f6c 100644 --- a/drivers/net/skge.c +++ b/drivers/net/skge.c @@ -2155,8 +2155,6 @@ static void yukon_link_down(struct skge_port *skge) int port = skge->port; u16 ctrl; - gm_phy_write(hw, port, PHY_MARV_INT_MASK, 0); - ctrl = gma_read16(hw, port, GM_GP_CTRL); ctrl &= ~(GM_GPCR_RX_ENA | GM_GPCR_TX_ENA); gma_write16(hw, port, GM_GP_CTRL, ctrl); @@ -2168,7 +2166,6 @@ static void yukon_link_down(struct skge_port *skge) gm_phy_write(hw, port, PHY_MARV_AUNE_ADV, ctrl); } - yukon_reset(hw, port); skge_link_down(skge); yukon_init(hw, port); @@ -2256,6 +2253,7 @@ static void skge_phy_reset(struct skge_port *skge) { struct skge_hw *hw = skge->hw; int port = skge->port; + struct net_device *dev = hw->dev[port]; netif_stop_queue(skge->netdev); netif_carrier_off(skge->netdev); @@ -2269,6 +2267,8 @@ static void skge_phy_reset(struct skge_port *skge) yukon_init(hw, port); } mutex_unlock(&hw->phy_mutex); + + dev->set_multicast_list(dev); } /* Basic MII support */ @@ -2566,7 +2566,7 @@ static int skge_xmit_frame(struct sk_buff *skb, struct net_device *dev) td->csum_offs = 0; td->csum_start = offset; - td->csum_write = offset + skb->csum; + td->csum_write = offset + skb->csum_offset; } else control = BMU_CHECK; diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 16616f5440d..842abd9396c 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -104,6 +104,7 @@ static const struct pci_device_id sky2_id_table[] = { { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9E00) }, { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4b00) }, /* DGE-560T */ { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4001) }, /* DGE-550SX */ + { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4B02) }, /* DGE-560SX */ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4340) }, { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4341) }, { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4342) }, @@ -676,17 +677,15 @@ static void sky2_mac_init(struct sky2_hw *hw, unsigned port) /* Flush Rx MAC FIFO on any flow control or error */ sky2_write16(hw, SK_REG(port, RX_GMF_FL_MSK), GMR_FS_ANY_ERR); - /* Set threshold to 0xa (64 bytes) - * ASF disabled so no need to do WA dev #4.30 - */ - sky2_write16(hw, SK_REG(port, RX_GMF_FL_THR), RX_GMF_FL_THR_DEF); + /* Set threshold to 0xa (64 bytes) + 1 to workaround pause bug */ + sky2_write16(hw, SK_REG(port, RX_GMF_FL_THR), RX_GMF_FL_THR_DEF+1); /* Configure Tx MAC FIFO */ sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_CLR); sky2_write16(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_OPER_ON); if (hw->chip_id == CHIP_ID_YUKON_EC_U) { - sky2_write8(hw, SK_REG(port, RX_GMF_LP_THR), 512/8); + sky2_write8(hw, SK_REG(port, RX_GMF_LP_THR), 768/8); sky2_write8(hw, SK_REG(port, RX_GMF_UP_THR), 1024/8); if (hw->dev[port]->mtu > ETH_DATA_LEN) { /* set Tx GMAC FIFO Almost Empty Threshold */ @@ -1060,7 +1059,8 @@ static int sky2_rx_start(struct sky2_port *sky2) sky2->rx_put = sky2->rx_next = 0; sky2_qset(hw, rxq); - if (hw->chip_id == CHIP_ID_YUKON_EC_U && hw->chip_rev >= 2) { + if (hw->chip_id == CHIP_ID_YUKON_EC_U && + (hw->chip_rev == CHIP_REV_YU_EC_U_A1 || hw->chip_rev == CHIP_REV_YU_EC_U_B0)) { /* MAC Rx RAM Read is controlled by hardware */ sky2_write32(hw, Q_ADDR(rxq, Q_F), F_M_RX_RAM_DIS); } @@ -1350,7 +1350,7 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev) u32 tcpsum; tcpsum = offset << 16; /* sum start */ - tcpsum |= offset + skb->csum; /* sum write */ + tcpsum |= offset + skb->csum_offset; /* sum write */ ctrl = CALSUM | WR_SUM | INIT_SUM | LOCK_SUM; if (skb->nh.iph->protocol == IPPROTO_UDP) @@ -1453,7 +1453,7 @@ static void sky2_tx_complete(struct sky2_port *sky2, u16 done) if (unlikely(netif_msg_tx_done(sky2))) printk(KERN_DEBUG "%s: tx done %u\n", dev->name, idx); - dev_kfree_skb(re->skb); + dev_kfree_skb_any(re->skb); } le->opcode = 0; /* paranoia */ @@ -1509,7 +1509,7 @@ static int sky2_down(struct net_device *dev) /* WA for dev. #4.209 */ if (hw->chip_id == CHIP_ID_YUKON_EC_U - && hw->chip_rev == CHIP_REV_YU_EC_U_A1) + && (hw->chip_rev == CHIP_REV_YU_EC_U_A1 || hw->chip_rev == CHIP_REV_YU_EC_U_B0)) sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), sky2->speed != SPEED_1000 ? TX_STFW_ENA : TX_STFW_DIS); @@ -2065,7 +2065,7 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do) case OP_RXSTAT: skb = sky2_receive(dev, length, status); if (!skb) - break; + goto force_update; skb->protocol = eth_type_trans(skb, dev); dev->last_rx = jiffies; @@ -2081,8 +2081,8 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do) /* Update receiver after 16 frames */ if (++buf_write[le->link] == RX_BUF_WRITE) { - sky2_put_idx(hw, rxqaddr[le->link], - sky2->rx_put); +force_update: + sky2_put_idx(hw, rxqaddr[le->link], sky2->rx_put); buf_write[le->link] = 0; } @@ -3311,7 +3311,7 @@ static irqreturn_t __devinit sky2_test_intr(int irq, void *dev_id) return IRQ_NONE; if (status & Y2_IS_IRQ_SW) { - hw->msi_detected = 1; + hw->msi = 1; wake_up(&hw->msi_wait); sky2_write8(hw, B0_CTST, CS_CL_SW_IRQ); } @@ -3330,7 +3330,7 @@ static int __devinit sky2_test_msi(struct sky2_hw *hw) sky2_write32(hw, B0_IMSK, Y2_IS_IRQ_SW); - err = request_irq(pdev->irq, sky2_test_intr, IRQF_SHARED, DRV_NAME, hw); + err = request_irq(pdev->irq, sky2_test_intr, 0, DRV_NAME, hw); if (err) { printk(KERN_ERR PFX "%s: cannot assign irq %d\n", pci_name(pdev), pdev->irq); @@ -3340,9 +3340,9 @@ static int __devinit sky2_test_msi(struct sky2_hw *hw) sky2_write8(hw, B0_CTST, CS_ST_SW_IRQ); sky2_read8(hw, B0_CTST); - wait_event_timeout(hw->msi_wait, hw->msi_detected, HZ/10); + wait_event_timeout(hw->msi_wait, hw->msi, HZ/10); - if (!hw->msi_detected) { + if (!hw->msi) { /* MSI test failed, go back to INTx mode */ printk(KERN_INFO PFX "%s: No interrupt generated using MSI, " "switching to INTx mode.\n", @@ -3475,7 +3475,8 @@ static int __devinit sky2_probe(struct pci_dev *pdev, goto err_out_free_netdev; } - err = request_irq(pdev->irq, sky2_intr, IRQF_SHARED, dev->name, hw); + err = request_irq(pdev->irq, sky2_intr, hw->msi ? 0 : IRQF_SHARED, + dev->name, hw); if (err) { printk(KERN_ERR PFX "%s: cannot assign irq %d\n", pci_name(pdev), pdev->irq); @@ -3505,7 +3506,8 @@ static int __devinit sky2_probe(struct pci_dev *pdev, return 0; err_out_unregister: - pci_disable_msi(pdev); + if (hw->msi) + pci_disable_msi(pdev); unregister_netdev(dev); err_out_free_netdev: free_netdev(dev); @@ -3548,7 +3550,8 @@ static void __devexit sky2_remove(struct pci_dev *pdev) sky2_read8(hw, B0_CTST); free_irq(pdev->irq, hw); - pci_disable_msi(pdev); + if (hw->msi) + pci_disable_msi(pdev); pci_free_consistent(pdev, STATUS_LE_BYTES, hw->st_le, hw->st_dma); pci_release_regions(pdev); pci_disable_device(pdev); diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h index 6d2a23f66c9..7760545edbf 100644 --- a/drivers/net/sky2.h +++ b/drivers/net/sky2.h @@ -383,8 +383,13 @@ enum { CHIP_REV_YU_EC_A2 = 1, /* Chip Rev. for Yukon-EC A2 */ CHIP_REV_YU_EC_A3 = 2, /* Chip Rev. for Yukon-EC A3 */ - CHIP_REV_YU_EC_U_A0 = 0, - CHIP_REV_YU_EC_U_A1 = 1, + CHIP_REV_YU_EC_U_A0 = 1, + CHIP_REV_YU_EC_U_A1 = 2, + CHIP_REV_YU_EC_U_B0 = 3, + + CHIP_REV_YU_FE_A1 = 1, + CHIP_REV_YU_FE_A2 = 2, + }; /* B2_Y2_CLK_GATE 8 bit Clock Gating (Yukon-2 only) */ @@ -1895,7 +1900,7 @@ struct sky2_hw { dma_addr_t st_dma; struct timer_list idle_timer; - int msi_detected; + int msi; wait_queue_head_t msi_wait; }; diff --git a/drivers/net/spider_net.c b/drivers/net/spider_net.c index f88fcac0e46..f16f696c1ff 100644 --- a/drivers/net/spider_net.c +++ b/drivers/net/spider_net.c @@ -644,20 +644,12 @@ spider_net_prepare_tx_descr(struct spider_net_card *card, struct spider_net_descr *descr; dma_addr_t buf; unsigned long flags; - int length; - length = skb->len; - if (length < ETH_ZLEN) { - if (skb_pad(skb, ETH_ZLEN-length)) - return 0; - length = ETH_ZLEN; - } - - buf = pci_map_single(card->pdev, skb->data, length, PCI_DMA_TODEVICE); + buf = pci_map_single(card->pdev, skb->data, skb->len, PCI_DMA_TODEVICE); if (pci_dma_mapping_error(buf)) { if (netif_msg_tx_err(card) && net_ratelimit()) pr_err("could not iommu-map packet (%p, %i). " - "Dropping packet\n", skb->data, length); + "Dropping packet\n", skb->data, skb->len); card->spider_stats.tx_iommu_map_error++; return -ENOMEM; } @@ -667,7 +659,7 @@ spider_net_prepare_tx_descr(struct spider_net_card *card, card->tx_chain.head = descr->next; descr->buf_addr = buf; - descr->buf_size = length; + descr->buf_size = skb->len; descr->next_descr_addr = 0; descr->skb = skb; descr->data_status = 0; @@ -802,8 +794,8 @@ spider_net_release_tx_chain(struct spider_net_card *card, int brutal) /* unmap the skb */ if (skb) { - int len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len; - pci_unmap_single(card->pdev, buf_addr, len, PCI_DMA_TODEVICE); + pci_unmap_single(card->pdev, buf_addr, skb->len, + PCI_DMA_TODEVICE); dev_kfree_skb(skb); } } @@ -1641,7 +1633,7 @@ spider_net_enable_card(struct spider_net_card *card) SPIDER_NET_INT2_MASK_VALUE); spider_net_write_reg(card, SPIDER_NET_GDTDMACCNTR, - SPIDER_NET_GDTBSTA | SPIDER_NET_GDTDCEIDIS); + SPIDER_NET_GDTBSTA); } /** diff --git a/drivers/net/spider_net.h b/drivers/net/spider_net.h index b3b46119b42..3e196df2979 100644 --- a/drivers/net/spider_net.h +++ b/drivers/net/spider_net.h @@ -24,7 +24,7 @@ #ifndef _SPIDER_NET_H #define _SPIDER_NET_H -#define VERSION "1.1 A" +#define VERSION "1.6 A" #include "sungem_phy.h" @@ -217,8 +217,7 @@ extern char spider_net_driver_name[]; #define SPIDER_NET_GDTBSTA 0x00000300 #define SPIDER_NET_GDTDCEIDIS 0x00000002 #define SPIDER_NET_DMA_TX_VALUE SPIDER_NET_TX_DMA_EN | \ - SPIDER_NET_GDTBSTA | \ - SPIDER_NET_GDTDCEIDIS + SPIDER_NET_GDTBSTA #define SPIDER_NET_DMA_TX_FEND_VALUE 0x00030003 @@ -328,7 +327,8 @@ enum spider_net_int2_status { SPIDER_NET_GRISPDNGINT }; -#define SPIDER_NET_TXINT ( (1 << SPIDER_NET_GDTFDCINT) ) +#define SPIDER_NET_TXINT ( (1 << SPIDER_NET_GDTFDCINT) | \ + (1 << SPIDER_NET_GDTDCEINT) ) /* We rely on flagged descriptor interrupts */ #define SPIDER_NET_RXINT ( (1 << SPIDER_NET_GDAFDCINT) ) diff --git a/drivers/net/sundance.c b/drivers/net/sundance.c index 41c503d8bac..c06ecc8002b 100644 --- a/drivers/net/sundance.c +++ b/drivers/net/sundance.c @@ -264,8 +264,6 @@ enum alta_offsets { ASICCtrl = 0x30, EEData = 0x34, EECtrl = 0x36, - TxStartThresh = 0x3c, - RxEarlyThresh = 0x3e, FlashAddr = 0x40, FlashData = 0x44, TxStatus = 0x46, @@ -790,6 +788,7 @@ static int netdev_open(struct net_device *dev) { struct netdev_private *np = netdev_priv(dev); void __iomem *ioaddr = np->base; + unsigned long flags; int i; /* Do we need to reset the chip??? */ @@ -834,6 +833,10 @@ static int netdev_open(struct net_device *dev) iowrite8(0x01, ioaddr + DebugCtrl1); netif_start_queue(dev); + spin_lock_irqsave(&np->lock, flags); + reset_tx(dev); + spin_unlock_irqrestore(&np->lock, flags); + iowrite16 (StatsEnable | RxEnable | TxEnable, ioaddr + MACCtrl1); if (netif_msg_ifup(np)) @@ -1081,6 +1084,8 @@ reset_tx (struct net_device *dev) /* free all tx skbuff */ for (i = 0; i < TX_RING_SIZE; i++) { + np->tx_ring[i].next_desc = 0; + skb = np->tx_skbuff[i]; if (skb) { pci_unmap_single(np->pci_dev, @@ -1096,6 +1101,10 @@ reset_tx (struct net_device *dev) } np->cur_tx = np->dirty_tx = 0; np->cur_task = 0; + + np->last_tx = NULL; + iowrite8(127, ioaddr + TxDMAPollPeriod); + iowrite16 (StatsEnable | RxEnable | TxEnable, ioaddr + MACCtrl1); return 0; } @@ -1111,6 +1120,7 @@ static irqreturn_t intr_handler(int irq, void *dev_instance) int tx_cnt; int tx_status; int handled = 0; + int i; do { @@ -1153,21 +1163,24 @@ static irqreturn_t intr_handler(int irq, void *dev_instance) np->stats.tx_fifo_errors++; if (tx_status & 0x02) np->stats.tx_window_errors++; + /* ** This reset has been verified on ** DFE-580TX boards ! phdm@macqel.be. */ if (tx_status & 0x10) { /* TxUnderrun */ - unsigned short txthreshold; - - txthreshold = ioread16 (ioaddr + TxStartThresh); /* Restart Tx FIFO and transmitter */ sundance_reset(dev, (NetworkReset|FIFOReset|TxReset) << 16); - iowrite16 (txthreshold, ioaddr + TxStartThresh); /* No need to reset the Tx pointer here */ } - /* Restart the Tx. */ - iowrite16 (TxEnable, ioaddr + MACCtrl1); + /* Restart the Tx. Need to make sure tx enabled */ + i = 10; + do { + iowrite16(ioread16(ioaddr + MACCtrl1) | TxEnable, ioaddr + MACCtrl1); + if (ioread16(ioaddr + MACCtrl1) & TxEnabled) + break; + mdelay(1); + } while (--i); } /* Yup, this is a documentation bug. It cost me *hours*. */ iowrite16 (0, ioaddr + TxStatus); @@ -1629,6 +1642,14 @@ static int netdev_close(struct net_device *dev) struct sk_buff *skb; int i; + /* Wait and kill tasklet */ + tasklet_kill(&np->rx_tasklet); + tasklet_kill(&np->tx_tasklet); + np->cur_tx = 0; + np->dirty_tx = 0; + np->cur_task = 0; + np->last_tx = NULL; + netif_stop_queue(dev); if (netif_msg_ifdown(np)) { @@ -1643,12 +1664,26 @@ static int netdev_close(struct net_device *dev) /* Disable interrupts by clearing the interrupt mask. */ iowrite16(0x0000, ioaddr + IntrEnable); + /* Disable Rx and Tx DMA for safely release resource */ + iowrite32(0x500, ioaddr + DMACtrl); + /* Stop the chip's Tx and Rx processes. */ iowrite16(TxDisable | RxDisable | StatsDisable, ioaddr + MACCtrl1); - /* Wait and kill tasklet */ - tasklet_kill(&np->rx_tasklet); - tasklet_kill(&np->tx_tasklet); + for (i = 2000; i > 0; i--) { + if ((ioread32(ioaddr + DMACtrl) & 0xc000) == 0) + break; + mdelay(1); + } + + iowrite16(GlobalReset | DMAReset | FIFOReset | NetworkReset, + ioaddr +ASICCtrl + 2); + + for (i = 2000; i > 0; i--) { + if ((ioread16(ioaddr + ASICCtrl +2) & ResetBusy) == 0) + break; + mdelay(1); + } #ifdef __i386__ if (netif_msg_hw(np)) { @@ -1686,6 +1721,7 @@ static int netdev_close(struct net_device *dev) } } for (i = 0; i < TX_RING_SIZE; i++) { + np->tx_ring[i].next_desc = 0; skb = np->tx_skbuff[i]; if (skb) { pci_unmap_single(np->pci_dev, diff --git a/drivers/net/sungem.c b/drivers/net/sungem.c index 004d651681a..d03a9a849c0 100644 --- a/drivers/net/sungem.c +++ b/drivers/net/sungem.c @@ -1030,7 +1030,7 @@ static int gem_start_xmit(struct sk_buff *skb, struct net_device *dev) u64 csum_start_off, csum_stuff_off; csum_start_off = (u64) (skb->h.raw - skb->data); - csum_stuff_off = (u64) ((skb->h.raw + skb->csum) - skb->data); + csum_stuff_off = csum_start_off + skb->csum_offset; ctrl = (TXDCTRL_CENAB | (csum_start_off << 15) | diff --git a/drivers/net/sunhme.c b/drivers/net/sunhme.c index 9d7cd130c19..ec432ea879f 100644 --- a/drivers/net/sunhme.c +++ b/drivers/net/sunhme.c @@ -2272,7 +2272,7 @@ static int happy_meal_start_xmit(struct sk_buff *skb, struct net_device *dev) u32 csum_start_off, csum_stuff_off; csum_start_off = (u32) (skb->h.raw - skb->data); - csum_stuff_off = (u32) ((skb->h.raw + skb->csum) - skb->data); + csum_stuff_off = csum_start_off + skb->csum_offset; tx_flags = (TXFLAG_OWN | TXFLAG_CSENABLE | ((csum_start_off << 14) & TXFLAG_CSBUFBEGIN) | diff --git a/drivers/net/tokenring/olympic.c b/drivers/net/tokenring/olympic.c index cd142d0302b..8f4ecc1109c 100644 --- a/drivers/net/tokenring/olympic.c +++ b/drivers/net/tokenring/olympic.c @@ -1771,7 +1771,7 @@ static struct pci_driver olympic_driver = { static int __init olympic_pci_init(void) { - return pci_module_init (&olympic_driver) ; + return pci_register_driver(&olympic_driver) ; } static void __exit olympic_pci_cleanup(void) diff --git a/drivers/net/tsi108_eth.c b/drivers/net/tsi108_eth.c new file mode 100644 index 00000000000..893808ab374 --- /dev/null +++ b/drivers/net/tsi108_eth.c @@ -0,0 +1,1708 @@ +/******************************************************************************* + + Copyright(c) 2006 Tundra Semiconductor Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms of the GNU General Public License as published by the Free + Software Foundation; either version 2 of the License, or (at your option) + any later version. + + This program is distributed in the hope that it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., 59 + Temple Place - Suite 330, Boston, MA 02111-1307, USA. + +*******************************************************************************/ + +/* This driver is based on the driver code originally developed + * for the Intel IOC80314 (ForestLake) Gigabit Ethernet by + * scott.wood@timesys.com * Copyright (C) 2003 TimeSys Corporation + * + * Currently changes from original version are: + * - porting to Tsi108-based platform and kernel 2.6 (kong.lai@tundra.com) + * - modifications to handle two ports independently and support for + * additional PHY devices (alexandre.bounine@tundra.com) + * - Get hardware information from platform device. (tie-fei.zang@freescale.com) + * + */ + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/init.h> +#include <linux/net.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/slab.h> +#include <linux/sched.h> +#include <linux/spinlock.h> +#include <linux/delay.h> +#include <linux/crc32.h> +#include <linux/mii.h> +#include <linux/device.h> +#include <linux/pci.h> +#include <linux/rtnetlink.h> +#include <linux/timer.h> +#include <linux/platform_device.h> +#include <linux/etherdevice.h> + +#include <asm/system.h> +#include <asm/io.h> +#include <asm/tsi108.h> + +#include "tsi108_eth.h" + +#define MII_READ_DELAY 10000 /* max link wait time in msec */ + +#define TSI108_RXRING_LEN 256 + +/* NOTE: The driver currently does not support receiving packets + * larger than the buffer size, so don't decrease this (unless you + * want to add such support). + */ +#define TSI108_RXBUF_SIZE 1536 + +#define TSI108_TXRING_LEN 256 + +#define TSI108_TX_INT_FREQ 64 + +/* Check the phy status every half a second. */ +#define CHECK_PHY_INTERVAL (HZ/2) + +static int tsi108_init_one(struct platform_device *pdev); +static int tsi108_ether_remove(struct platform_device *pdev); + +struct tsi108_prv_data { + void __iomem *regs; /* Base of normal regs */ + void __iomem *phyregs; /* Base of register bank used for PHY access */ + + unsigned int phy; /* Index of PHY for this interface */ + unsigned int irq_num; + unsigned int id; + + struct timer_list timer;/* Timer that triggers the check phy function */ + unsigned int rxtail; /* Next entry in rxring to read */ + unsigned int rxhead; /* Next entry in rxring to give a new buffer */ + unsigned int rxfree; /* Number of free, allocated RX buffers */ + + unsigned int rxpending; /* Non-zero if there are still descriptors + * to be processed from a previous descriptor + * interrupt condition that has been cleared */ + + unsigned int txtail; /* Next TX descriptor to check status on */ + unsigned int txhead; /* Next TX descriptor to use */ + + /* Number of free TX descriptors. This could be calculated from + * rxhead and rxtail if one descriptor were left unused to disambiguate + * full and empty conditions, but it's simpler to just keep track + * explicitly. */ + + unsigned int txfree; + + unsigned int phy_ok; /* The PHY is currently powered on. */ + + /* PHY status (duplex is 1 for half, 2 for full, + * so that the default 0 indicates that neither has + * yet been configured). */ + + unsigned int link_up; + unsigned int speed; + unsigned int duplex; + + tx_desc *txring; + rx_desc *rxring; + struct sk_buff *txskbs[TSI108_TXRING_LEN]; + struct sk_buff *rxskbs[TSI108_RXRING_LEN]; + + dma_addr_t txdma, rxdma; + + /* txlock nests in misclock and phy_lock */ + + spinlock_t txlock, misclock; + + /* stats is used to hold the upper bits of each hardware counter, + * and tmpstats is used to hold the full values for returning + * to the caller of get_stats(). They must be separate in case + * an overflow interrupt occurs before the stats are consumed. + */ + + struct net_device_stats stats; + struct net_device_stats tmpstats; + + /* These stats are kept separate in hardware, thus require individual + * fields for handling carry. They are combined in get_stats. + */ + + unsigned long rx_fcs; /* Add to rx_frame_errors */ + unsigned long rx_short_fcs; /* Add to rx_frame_errors */ + unsigned long rx_long_fcs; /* Add to rx_frame_errors */ + unsigned long rx_underruns; /* Add to rx_length_errors */ + unsigned long rx_overruns; /* Add to rx_length_errors */ + + unsigned long tx_coll_abort; /* Add to tx_aborted_errors/collisions */ + unsigned long tx_pause_drop; /* Add to tx_aborted_errors */ + + unsigned long mc_hash[16]; + u32 msg_enable; /* debug message level */ + struct mii_if_info mii_if; + unsigned int init_media; +}; + +/* Structure for a device driver */ + +static struct platform_driver tsi_eth_driver = { + .probe = tsi108_init_one, + .remove = tsi108_ether_remove, + .driver = { + .name = "tsi-ethernet", + }, +}; + +static void tsi108_timed_checker(unsigned long dev_ptr); + +static void dump_eth_one(struct net_device *dev) +{ + struct tsi108_prv_data *data = netdev_priv(dev); + + printk("Dumping %s...\n", dev->name); + printk("intstat %x intmask %x phy_ok %d" + " link %d speed %d duplex %d\n", + TSI_READ(TSI108_EC_INTSTAT), + TSI_READ(TSI108_EC_INTMASK), data->phy_ok, + data->link_up, data->speed, data->duplex); + + printk("TX: head %d, tail %d, free %d, stat %x, estat %x, err %x\n", + data->txhead, data->txtail, data->txfree, + TSI_READ(TSI108_EC_TXSTAT), + TSI_READ(TSI108_EC_TXESTAT), + TSI_READ(TSI108_EC_TXERR)); + + printk("RX: head %d, tail %d, free %d, stat %x," + " estat %x, err %x, pending %d\n\n", + data->rxhead, data->rxtail, data->rxfree, + TSI_READ(TSI108_EC_RXSTAT), + TSI_READ(TSI108_EC_RXESTAT), + TSI_READ(TSI108_EC_RXERR), data->rxpending); +} + +/* Synchronization is needed between the thread and up/down events. + * Note that the PHY is accessed through the same registers for both + * interfaces, so this can't be made interface-specific. + */ + +static DEFINE_SPINLOCK(phy_lock); + +static int tsi108_read_mii(struct tsi108_prv_data *data, int reg) +{ + unsigned i; + + TSI_WRITE_PHY(TSI108_MAC_MII_ADDR, + (data->phy << TSI108_MAC_MII_ADDR_PHY) | + (reg << TSI108_MAC_MII_ADDR_REG)); + TSI_WRITE_PHY(TSI108_MAC_MII_CMD, 0); + TSI_WRITE_PHY(TSI108_MAC_MII_CMD, TSI108_MAC_MII_CMD_READ); + for (i = 0; i < 100; i++) { + if (!(TSI_READ_PHY(TSI108_MAC_MII_IND) & + (TSI108_MAC_MII_IND_NOTVALID | TSI108_MAC_MII_IND_BUSY))) + break; + udelay(10); + } + + if (i == 100) + return 0xffff; + else + return (TSI_READ_PHY(TSI108_MAC_MII_DATAIN)); +} + +static void tsi108_write_mii(struct tsi108_prv_data *data, + int reg, u16 val) +{ + unsigned i = 100; + TSI_WRITE_PHY(TSI108_MAC_MII_ADDR, + (data->phy << TSI108_MAC_MII_ADDR_PHY) | + (reg << TSI108_MAC_MII_ADDR_REG)); + TSI_WRITE_PHY(TSI108_MAC_MII_DATAOUT, val); + while (i--) { + if(!(TSI_READ_PHY(TSI108_MAC_MII_IND) & + TSI108_MAC_MII_IND_BUSY)) + break; + udelay(10); + } +} + +static int tsi108_mdio_read(struct net_device *dev, int addr, int reg) +{ + struct tsi108_prv_data *data = netdev_priv(dev); + return tsi108_read_mii(data, reg); +} + +static void tsi108_mdio_write(struct net_device *dev, int addr, int reg, int val) +{ + struct tsi108_prv_data *data = netdev_priv(dev); + tsi108_write_mii(data, reg, val); +} + +static inline void tsi108_write_tbi(struct tsi108_prv_data *data, + int reg, u16 val) +{ + unsigned i = 1000; + TSI_WRITE(TSI108_MAC_MII_ADDR, + (0x1e << TSI108_MAC_MII_ADDR_PHY) + | (reg << TSI108_MAC_MII_ADDR_REG)); + TSI_WRITE(TSI108_MAC_MII_DATAOUT, val); + while(i--) { + if(!(TSI_READ(TSI108_MAC_MII_IND) & TSI108_MAC_MII_IND_BUSY)) + return; + udelay(10); + } + printk(KERN_ERR "%s function time out \n", __FUNCTION__); +} + +static int mii_speed(struct mii_if_info *mii) +{ + int advert, lpa, val, media; + int lpa2 = 0; + int speed; + + if (!mii_link_ok(mii)) + return 0; + + val = (*mii->mdio_read) (mii->dev, mii->phy_id, MII_BMSR); + if ((val & BMSR_ANEGCOMPLETE) == 0) + return 0; + + advert = (*mii->mdio_read) (mii->dev, mii->phy_id, MII_ADVERTISE); + lpa = (*mii->mdio_read) (mii->dev, mii->phy_id, MII_LPA); + media = mii_nway_result(advert & lpa); + + if (mii->supports_gmii) + lpa2 = mii->mdio_read(mii->dev, mii->phy_id, MII_STAT1000); + + speed = lpa2 & (LPA_1000FULL | LPA_1000HALF) ? 1000 : + (media & (ADVERTISE_100FULL | ADVERTISE_100HALF) ? 100 : 10); + return speed; +} + +static void tsi108_check_phy(struct net_device *dev) +{ + struct tsi108_prv_data *data = netdev_priv(dev); + u32 mac_cfg2_reg, portctrl_reg; + u32 duplex; + u32 speed; + unsigned long flags; + + /* Do a dummy read, as for some reason the first read + * after a link becomes up returns link down, even if + * it's been a while since the link came up. + */ + + spin_lock_irqsave(&phy_lock, flags); + + if (!data->phy_ok) + goto out; + + tsi108_read_mii(data, MII_BMSR); + + duplex = mii_check_media(&data->mii_if, netif_msg_link(data), data->init_media); + data->init_media = 0; + + if (netif_carrier_ok(dev)) { + + speed = mii_speed(&data->mii_if); + + if ((speed != data->speed) || duplex) { + + mac_cfg2_reg = TSI_READ(TSI108_MAC_CFG2); + portctrl_reg = TSI_READ(TSI108_EC_PORTCTRL); + + mac_cfg2_reg &= ~TSI108_MAC_CFG2_IFACE_MASK; + + if (speed == 1000) { + mac_cfg2_reg |= TSI108_MAC_CFG2_GIG; + portctrl_reg &= ~TSI108_EC_PORTCTRL_NOGIG; + } else { + mac_cfg2_reg |= TSI108_MAC_CFG2_NOGIG; + portctrl_reg |= TSI108_EC_PORTCTRL_NOGIG; + } + + data->speed = speed; + + if (data->mii_if.full_duplex) { + mac_cfg2_reg |= TSI108_MAC_CFG2_FULLDUPLEX; + portctrl_reg &= ~TSI108_EC_PORTCTRL_HALFDUPLEX; + data->duplex = 2; + } else { + mac_cfg2_reg &= ~TSI108_MAC_CFG2_FULLDUPLEX; + portctrl_reg |= TSI108_EC_PORTCTRL_HALFDUPLEX; + data->duplex = 1; + } + + TSI_WRITE(TSI108_MAC_CFG2, mac_cfg2_reg); + TSI_WRITE(TSI108_EC_PORTCTRL, portctrl_reg); + + if (data->link_up == 0) { + /* The manual says it can take 3-4 usecs for the speed change + * to take effect. + */ + udelay(5); + + spin_lock(&data->txlock); + if (is_valid_ether_addr(dev->dev_addr) && data->txfree) + netif_wake_queue(dev); + + data->link_up = 1; + spin_unlock(&data->txlock); + } + } + + } else { + if (data->link_up == 1) { + netif_stop_queue(dev); + data->link_up = 0; + printk(KERN_NOTICE "%s : link is down\n", dev->name); + } + + goto out; + } + + +out: + spin_unlock_irqrestore(&phy_lock, flags); +} + +static inline void +tsi108_stat_carry_one(int carry, int carry_bit, int carry_shift, + unsigned long *upper) +{ + if (carry & carry_bit) + *upper += carry_shift; +} + +static void tsi108_stat_carry(struct net_device *dev) +{ + struct tsi108_prv_data *data = netdev_priv(dev); + u32 carry1, carry2; + + spin_lock_irq(&data->misclock); + + carry1 = TSI_READ(TSI108_STAT_CARRY1); + carry2 = TSI_READ(TSI108_STAT_CARRY2); + + TSI_WRITE(TSI108_STAT_CARRY1, carry1); + TSI_WRITE(TSI108_STAT_CARRY2, carry2); + + tsi108_stat_carry_one(carry1, TSI108_STAT_CARRY1_RXBYTES, + TSI108_STAT_RXBYTES_CARRY, &data->stats.rx_bytes); + + tsi108_stat_carry_one(carry1, TSI108_STAT_CARRY1_RXPKTS, + TSI108_STAT_RXPKTS_CARRY, + &data->stats.rx_packets); + + tsi108_stat_carry_one(carry1, TSI108_STAT_CARRY1_RXFCS, + TSI108_STAT_RXFCS_CARRY, &data->rx_fcs); + + tsi108_stat_carry_one(carry1, TSI108_STAT_CARRY1_RXMCAST, + TSI108_STAT_RXMCAST_CARRY, + &data->stats.multicast); + + tsi108_stat_carry_one(carry1, TSI108_STAT_CARRY1_RXALIGN, + TSI108_STAT_RXALIGN_CARRY, + &data->stats.rx_frame_errors); + + tsi108_stat_carry_one(carry1, TSI108_STAT_CARRY1_RXLENGTH, + TSI108_STAT_RXLENGTH_CARRY, + &data->stats.rx_length_errors); + + tsi108_stat_carry_one(carry1, TSI108_STAT_CARRY1_RXRUNT, + TSI108_STAT_RXRUNT_CARRY, &data->rx_underruns); + + tsi108_stat_carry_one(carry1, TSI108_STAT_CARRY1_RXJUMBO, + TSI108_STAT_RXJUMBO_CARRY, &data->rx_overruns); + + tsi108_stat_carry_one(carry1, TSI108_STAT_CARRY1_RXFRAG, + TSI108_STAT_RXFRAG_CARRY, &data->rx_short_fcs); + + tsi108_stat_carry_one(carry1, TSI108_STAT_CARRY1_RXJABBER, + TSI108_STAT_RXJABBER_CARRY, &data->rx_long_fcs); + + tsi108_stat_carry_one(carry1, TSI108_STAT_CARRY1_RXDROP, + TSI108_STAT_RXDROP_CARRY, + &data->stats.rx_missed_errors); + + tsi108_stat_carry_one(carry2, TSI108_STAT_CARRY2_TXBYTES, + TSI108_STAT_TXBYTES_CARRY, &data->stats.tx_bytes); + + tsi108_stat_carry_one(carry2, TSI108_STAT_CARRY2_TXPKTS, + TSI108_STAT_TXPKTS_CARRY, + &data->stats.tx_packets); + + tsi108_stat_carry_one(carry2, TSI108_STAT_CARRY2_TXEXDEF, + TSI108_STAT_TXEXDEF_CARRY, + &data->stats.tx_aborted_errors); + + tsi108_stat_carry_one(carry2, TSI108_STAT_CARRY2_TXEXCOL, + TSI108_STAT_TXEXCOL_CARRY, &data->tx_coll_abort); + + tsi108_stat_carry_one(carry2, TSI108_STAT_CARRY2_TXTCOL, + TSI108_STAT_TXTCOL_CARRY, + &data->stats.collisions); + + tsi108_stat_carry_one(carry2, TSI108_STAT_CARRY2_TXPAUSE, + TSI108_STAT_TXPAUSEDROP_CARRY, + &data->tx_pause_drop); + + spin_unlock_irq(&data->misclock); +} + +/* Read a stat counter atomically with respect to carries. + * data->misclock must be held. + */ +static inline unsigned long +tsi108_read_stat(struct tsi108_prv_data * data, int reg, int carry_bit, + int carry_shift, unsigned long *upper) +{ + int carryreg; + unsigned long val; + + if (reg < 0xb0) + carryreg = TSI108_STAT_CARRY1; + else + carryreg = TSI108_STAT_CARRY2; + + again: + val = TSI_READ(reg) | *upper; + + /* Check to see if it overflowed, but the interrupt hasn't + * been serviced yet. If so, handle the carry here, and + * try again. + */ + + if (unlikely(TSI_READ(carryreg) & carry_bit)) { + *upper += carry_shift; + TSI_WRITE(carryreg, carry_bit); + goto again; + } + + return val; +} + +static struct net_device_stats *tsi108_get_stats(struct net_device *dev) +{ + unsigned long excol; + + struct tsi108_prv_data *data = netdev_priv(dev); + spin_lock_irq(&data->misclock); + + data->tmpstats.rx_packets = + tsi108_read_stat(data, TSI108_STAT_RXPKTS, + TSI108_STAT_CARRY1_RXPKTS, + TSI108_STAT_RXPKTS_CARRY, &data->stats.rx_packets); + + data->tmpstats.tx_packets = + tsi108_read_stat(data, TSI108_STAT_TXPKTS, + TSI108_STAT_CARRY2_TXPKTS, + TSI108_STAT_TXPKTS_CARRY, &data->stats.tx_packets); + + data->tmpstats.rx_bytes = + tsi108_read_stat(data, TSI108_STAT_RXBYTES, + TSI108_STAT_CARRY1_RXBYTES, + TSI108_STAT_RXBYTES_CARRY, &data->stats.rx_bytes); + + data->tmpstats.tx_bytes = + tsi108_read_stat(data, TSI108_STAT_TXBYTES, + TSI108_STAT_CARRY2_TXBYTES, + TSI108_STAT_TXBYTES_CARRY, &data->stats.tx_bytes); + + data->tmpstats.multicast = + tsi108_read_stat(data, TSI108_STAT_RXMCAST, + TSI108_STAT_CARRY1_RXMCAST, + TSI108_STAT_RXMCAST_CARRY, &data->stats.multicast); + + excol = tsi108_read_stat(data, TSI108_STAT_TXEXCOL, + TSI108_STAT_CARRY2_TXEXCOL, + TSI108_STAT_TXEXCOL_CARRY, + &data->tx_coll_abort); + + data->tmpstats.collisions = + tsi108_read_stat(data, TSI108_STAT_TXTCOL, + TSI108_STAT_CARRY2_TXTCOL, + TSI108_STAT_TXTCOL_CARRY, &data->stats.collisions); + + data->tmpstats.collisions += excol; + + data->tmpstats.rx_length_errors = + tsi108_read_stat(data, TSI108_STAT_RXLENGTH, + TSI108_STAT_CARRY1_RXLENGTH, + TSI108_STAT_RXLENGTH_CARRY, + &data->stats.rx_length_errors); + + data->tmpstats.rx_length_errors += + tsi108_read_stat(data, TSI108_STAT_RXRUNT, + TSI108_STAT_CARRY1_RXRUNT, + TSI108_STAT_RXRUNT_CARRY, &data->rx_underruns); + + data->tmpstats.rx_length_errors += + tsi108_read_stat(data, TSI108_STAT_RXJUMBO, + TSI108_STAT_CARRY1_RXJUMBO, + TSI108_STAT_RXJUMBO_CARRY, &data->rx_overruns); + + data->tmpstats.rx_frame_errors = + tsi108_read_stat(data, TSI108_STAT_RXALIGN, + TSI108_STAT_CARRY1_RXALIGN, + TSI108_STAT_RXALIGN_CARRY, + &data->stats.rx_frame_errors); + + data->tmpstats.rx_frame_errors += + tsi108_read_stat(data, TSI108_STAT_RXFCS, + TSI108_STAT_CARRY1_RXFCS, TSI108_STAT_RXFCS_CARRY, + &data->rx_fcs); + + data->tmpstats.rx_frame_errors += + tsi108_read_stat(data, TSI108_STAT_RXFRAG, + TSI108_STAT_CARRY1_RXFRAG, + TSI108_STAT_RXFRAG_CARRY, &data->rx_short_fcs); + + data->tmpstats.rx_missed_errors = + tsi108_read_stat(data, TSI108_STAT_RXDROP, + TSI108_STAT_CARRY1_RXDROP, + TSI108_STAT_RXDROP_CARRY, + &data->stats.rx_missed_errors); + + /* These three are maintained by software. */ + data->tmpstats.rx_fifo_errors = data->stats.rx_fifo_errors; + data->tmpstats.rx_crc_errors = data->stats.rx_crc_errors; + + data->tmpstats.tx_aborted_errors = + tsi108_read_stat(data, TSI108_STAT_TXEXDEF, + TSI108_STAT_CARRY2_TXEXDEF, + TSI108_STAT_TXEXDEF_CARRY, + &data->stats.tx_aborted_errors); + + data->tmpstats.tx_aborted_errors += + tsi108_read_stat(data, TSI108_STAT_TXPAUSEDROP, + TSI108_STAT_CARRY2_TXPAUSE, + TSI108_STAT_TXPAUSEDROP_CARRY, + &data->tx_pause_drop); + + data->tmpstats.tx_aborted_errors += excol; + + data->tmpstats.tx_errors = data->tmpstats.tx_aborted_errors; + data->tmpstats.rx_errors = data->tmpstats.rx_length_errors + + data->tmpstats.rx_crc_errors + + data->tmpstats.rx_frame_errors + + data->tmpstats.rx_fifo_errors + data->tmpstats.rx_missed_errors; + + spin_unlock_irq(&data->misclock); + return &data->tmpstats; +} + +static void tsi108_restart_rx(struct tsi108_prv_data * data, struct net_device *dev) +{ + TSI_WRITE(TSI108_EC_RXQ_PTRHIGH, + TSI108_EC_RXQ_PTRHIGH_VALID); + + TSI_WRITE(TSI108_EC_RXCTRL, TSI108_EC_RXCTRL_GO + | TSI108_EC_RXCTRL_QUEUE0); +} + +static void tsi108_restart_tx(struct tsi108_prv_data * data) +{ + TSI_WRITE(TSI108_EC_TXQ_PTRHIGH, + TSI108_EC_TXQ_PTRHIGH_VALID); + + TSI_WRITE(TSI108_EC_TXCTRL, TSI108_EC_TXCTRL_IDLEINT | + TSI108_EC_TXCTRL_GO | TSI108_EC_TXCTRL_QUEUE0); +} + +/* txlock must be held by caller, with IRQs disabled, and + * with permission to re-enable them when the lock is dropped. + */ +static void tsi108_complete_tx(struct net_device *dev) +{ + struct tsi108_prv_data *data = netdev_priv(dev); + int tx; + struct sk_buff *skb; + int release = 0; + + while (!data->txfree || data->txhead != data->txtail) { + tx = data->txtail; + + if (data->txring[tx].misc & TSI108_TX_OWN) + break; + + skb = data->txskbs[tx]; + + if (!(data->txring[tx].misc & TSI108_TX_OK)) + printk("%s: bad tx packet, misc %x\n", + dev->name, data->txring[tx].misc); + + data->txtail = (data->txtail + 1) % TSI108_TXRING_LEN; + data->txfree++; + + if (data->txring[tx].misc & TSI108_TX_EOF) { + dev_kfree_skb_any(skb); + release++; + } + } + + if (release) { + if (is_valid_ether_addr(dev->dev_addr) && data->link_up) + netif_wake_queue(dev); + } +} + +static int tsi108_send_packet(struct sk_buff * skb, struct net_device *dev) +{ + struct tsi108_prv_data *data = netdev_priv(dev); + int frags = skb_shinfo(skb)->nr_frags + 1; + int i; + + if (!data->phy_ok && net_ratelimit()) + printk(KERN_ERR "%s: Transmit while PHY is down!\n", dev->name); + + if (!data->link_up) { + printk(KERN_ERR "%s: Transmit while link is down!\n", + dev->name); + netif_stop_queue(dev); + return NETDEV_TX_BUSY; + } + + if (data->txfree < MAX_SKB_FRAGS + 1) { + netif_stop_queue(dev); + + if (net_ratelimit()) + printk(KERN_ERR "%s: Transmit with full tx ring!\n", + dev->name); + return NETDEV_TX_BUSY; + } + + if (data->txfree - frags < MAX_SKB_FRAGS + 1) { + netif_stop_queue(dev); + } + + spin_lock_irq(&data->txlock); + + for (i = 0; i < frags; i++) { + int misc = 0; + int tx = data->txhead; + + /* This is done to mark every TSI108_TX_INT_FREQ tx buffers with + * the interrupt bit. TX descriptor-complete interrupts are + * enabled when the queue fills up, and masked when there is + * still free space. This way, when saturating the outbound + * link, the tx interrupts are kept to a reasonable level. + * When the queue is not full, reclamation of skbs still occurs + * as new packets are transmitted, or on a queue-empty + * interrupt. + */ + + if ((tx % TSI108_TX_INT_FREQ == 0) && + ((TSI108_TXRING_LEN - data->txfree) >= TSI108_TX_INT_FREQ)) + misc = TSI108_TX_INT; + + data->txskbs[tx] = skb; + + if (i == 0) { + data->txring[tx].buf0 = dma_map_single(NULL, skb->data, + skb->len - skb->data_len, DMA_TO_DEVICE); + data->txring[tx].len = skb->len - skb->data_len; + misc |= TSI108_TX_SOF; + } else { + skb_frag_t *frag = &skb_shinfo(skb)->frags[i - 1]; + + data->txring[tx].buf0 = + dma_map_page(NULL, frag->page, frag->page_offset, + frag->size, DMA_TO_DEVICE); + data->txring[tx].len = frag->size; + } + + if (i == frags - 1) + misc |= TSI108_TX_EOF; + + if (netif_msg_pktdata(data)) { + int i; + printk("%s: Tx Frame contents (%d)\n", dev->name, + skb->len); + for (i = 0; i < skb->len; i++) + printk(" %2.2x", skb->data[i]); + printk(".\n"); + } + data->txring[tx].misc = misc | TSI108_TX_OWN; + + data->txhead = (data->txhead + 1) % TSI108_TXRING_LEN; + data->txfree--; + } + + tsi108_complete_tx(dev); + + /* This must be done after the check for completed tx descriptors, + * so that the tail pointer is correct. + */ + + if (!(TSI_READ(TSI108_EC_TXSTAT) & TSI108_EC_TXSTAT_QUEUE0)) + tsi108_restart_tx(data); + + spin_unlock_irq(&data->txlock); + return NETDEV_TX_OK; +} + +static int tsi108_complete_rx(struct net_device *dev, int budget) +{ + struct tsi108_prv_data *data = netdev_priv(dev); + int done = 0; + + while (data->rxfree && done != budget) { + int rx = data->rxtail; + struct sk_buff *skb; + + if (data->rxring[rx].misc & TSI108_RX_OWN) + break; + + skb = data->rxskbs[rx]; + data->rxtail = (data->rxtail + 1) % TSI108_RXRING_LEN; + data->rxfree--; + done++; + + if (data->rxring[rx].misc & TSI108_RX_BAD) { + spin_lock_irq(&data->misclock); + + if (data->rxring[rx].misc & TSI108_RX_CRC) + data->stats.rx_crc_errors++; + if (data->rxring[rx].misc & TSI108_RX_OVER) + data->stats.rx_fifo_errors++; + + spin_unlock_irq(&data->misclock); + + dev_kfree_skb_any(skb); + continue; + } + if (netif_msg_pktdata(data)) { + int i; + printk("%s: Rx Frame contents (%d)\n", + dev->name, data->rxring[rx].len); + for (i = 0; i < data->rxring[rx].len; i++) + printk(" %2.2x", skb->data[i]); + printk(".\n"); + } + + skb->dev = dev; + skb_put(skb, data->rxring[rx].len); + skb->protocol = eth_type_trans(skb, dev); + netif_receive_skb(skb); + dev->last_rx = jiffies; + } + + return done; +} + +static int tsi108_refill_rx(struct net_device *dev, int budget) +{ + struct tsi108_prv_data *data = netdev_priv(dev); + int done = 0; + + while (data->rxfree != TSI108_RXRING_LEN && done != budget) { + int rx = data->rxhead; + struct sk_buff *skb; + + data->rxskbs[rx] = skb = dev_alloc_skb(TSI108_RXBUF_SIZE + 2); + if (!skb) + break; + + skb_reserve(skb, 2); /* Align the data on a 4-byte boundary. */ + + data->rxring[rx].buf0 = dma_map_single(NULL, skb->data, + TSI108_RX_SKB_SIZE, + DMA_FROM_DEVICE); + + /* Sometimes the hardware sets blen to zero after packet + * reception, even though the manual says that it's only ever + * modified by the driver. + */ + + data->rxring[rx].blen = TSI108_RX_SKB_SIZE; + data->rxring[rx].misc = TSI108_RX_OWN | TSI108_RX_INT; + + data->rxhead = (data->rxhead + 1) % TSI108_RXRING_LEN; + data->rxfree++; + done++; + } + + if (done != 0 && !(TSI_READ(TSI108_EC_RXSTAT) & + TSI108_EC_RXSTAT_QUEUE0)) + tsi108_restart_rx(data, dev); + + return done; +} + +static int tsi108_poll(struct net_device *dev, int *budget) +{ + struct tsi108_prv_data *data = netdev_priv(dev); + u32 estat = TSI_READ(TSI108_EC_RXESTAT); + u32 intstat = TSI_READ(TSI108_EC_INTSTAT); + int total_budget = min(*budget, dev->quota); + int num_received = 0, num_filled = 0, budget_used; + + intstat &= TSI108_INT_RXQUEUE0 | TSI108_INT_RXTHRESH | + TSI108_INT_RXOVERRUN | TSI108_INT_RXERROR | TSI108_INT_RXWAIT; + + TSI_WRITE(TSI108_EC_RXESTAT, estat); + TSI_WRITE(TSI108_EC_INTSTAT, intstat); + + if (data->rxpending || (estat & TSI108_EC_RXESTAT_Q0_DESCINT)) + num_received = tsi108_complete_rx(dev, total_budget); + + /* This should normally fill no more slots than the number of + * packets received in tsi108_complete_rx(). The exception + * is when we previously ran out of memory for RX SKBs. In that + * case, it's helpful to obey the budget, not only so that the + * CPU isn't hogged, but so that memory (which may still be low) + * is not hogged by one device. + * + * A work unit is considered to be two SKBs to allow us to catch + * up when the ring has shrunk due to out-of-memory but we're + * still removing the full budget's worth of packets each time. + */ + + if (data->rxfree < TSI108_RXRING_LEN) + num_filled = tsi108_refill_rx(dev, total_budget * 2); + + if (intstat & TSI108_INT_RXERROR) { + u32 err = TSI_READ(TSI108_EC_RXERR); + TSI_WRITE(TSI108_EC_RXERR, err); + + if (err) { + if (net_ratelimit()) + printk(KERN_DEBUG "%s: RX error %x\n", + dev->name, err); + + if (!(TSI_READ(TSI108_EC_RXSTAT) & + TSI108_EC_RXSTAT_QUEUE0)) + tsi108_restart_rx(data, dev); + } + } + + if (intstat & TSI108_INT_RXOVERRUN) { + spin_lock_irq(&data->misclock); + data->stats.rx_fifo_errors++; + spin_unlock_irq(&data->misclock); + } + + budget_used = max(num_received, num_filled / 2); + + *budget -= budget_used; + dev->quota -= budget_used; + + if (budget_used != total_budget) { + data->rxpending = 0; + netif_rx_complete(dev); + + TSI_WRITE(TSI108_EC_INTMASK, + TSI_READ(TSI108_EC_INTMASK) + & ~(TSI108_INT_RXQUEUE0 + | TSI108_INT_RXTHRESH | + TSI108_INT_RXOVERRUN | + TSI108_INT_RXERROR | + TSI108_INT_RXWAIT)); + + /* IRQs are level-triggered, so no need to re-check */ + return 0; + } else { + data->rxpending = 1; + } + + return 1; +} + +static void tsi108_rx_int(struct net_device *dev) +{ + struct tsi108_prv_data *data = netdev_priv(dev); + + /* A race could cause dev to already be scheduled, so it's not an + * error if that happens (and interrupts shouldn't be re-masked, + * because that can cause harmful races, if poll has already + * unmasked them but not cleared LINK_STATE_SCHED). + * + * This can happen if this code races with tsi108_poll(), which masks + * the interrupts after tsi108_irq_one() read the mask, but before + * netif_rx_schedule is called. It could also happen due to calls + * from tsi108_check_rxring(). + */ + + if (netif_rx_schedule_prep(dev)) { + /* Mask, rather than ack, the receive interrupts. The ack + * will happen in tsi108_poll(). + */ + + TSI_WRITE(TSI108_EC_INTMASK, + TSI_READ(TSI108_EC_INTMASK) | + TSI108_INT_RXQUEUE0 + | TSI108_INT_RXTHRESH | + TSI108_INT_RXOVERRUN | TSI108_INT_RXERROR | + TSI108_INT_RXWAIT); + __netif_rx_schedule(dev); + } else { + if (!netif_running(dev)) { + /* This can happen if an interrupt occurs while the + * interface is being brought down, as the START + * bit is cleared before the stop function is called. + * + * In this case, the interrupts must be masked, or + * they will continue indefinitely. + * + * There's a race here if the interface is brought down + * and then up in rapid succession, as the device could + * be made running after the above check and before + * the masking below. This will only happen if the IRQ + * thread has a lower priority than the task brining + * up the interface. Fixing this race would likely + * require changes in generic code. + */ + + TSI_WRITE(TSI108_EC_INTMASK, + TSI_READ + (TSI108_EC_INTMASK) | + TSI108_INT_RXQUEUE0 | + TSI108_INT_RXTHRESH | + TSI108_INT_RXOVERRUN | + TSI108_INT_RXERROR | + TSI108_INT_RXWAIT); + } + } +} + +/* If the RX ring has run out of memory, try periodically + * to allocate some more, as otherwise poll would never + * get called (apart from the initial end-of-queue condition). + * + * This is called once per second (by default) from the thread. + */ + +static void tsi108_check_rxring(struct net_device *dev) +{ + struct tsi108_prv_data *data = netdev_priv(dev); + + /* A poll is scheduled, as opposed to caling tsi108_refill_rx + * directly, so as to keep the receive path single-threaded + * (and thus not needing a lock). + */ + + if (netif_running(dev) && data->rxfree < TSI108_RXRING_LEN / 4) + tsi108_rx_int(dev); +} + +static void tsi108_tx_int(struct net_device *dev) +{ + struct tsi108_prv_data *data = netdev_priv(dev); + u32 estat = TSI_READ(TSI108_EC_TXESTAT); + + TSI_WRITE(TSI108_EC_TXESTAT, estat); + TSI_WRITE(TSI108_EC_INTSTAT, TSI108_INT_TXQUEUE0 | + TSI108_INT_TXIDLE | TSI108_INT_TXERROR); + if (estat & TSI108_EC_TXESTAT_Q0_ERR) { + u32 err = TSI_READ(TSI108_EC_TXERR); + TSI_WRITE(TSI108_EC_TXERR, err); + + if (err && net_ratelimit()) + printk(KERN_ERR "%s: TX error %x\n", dev->name, err); + } + + if (estat & (TSI108_EC_TXESTAT_Q0_DESCINT | TSI108_EC_TXESTAT_Q0_EOQ)) { + spin_lock(&data->txlock); + tsi108_complete_tx(dev); + spin_unlock(&data->txlock); + } +} + + +static irqreturn_t tsi108_irq(int irq, void *dev_id) +{ + struct net_device *dev = dev_id; + struct tsi108_prv_data *data = netdev_priv(dev); + u32 stat = TSI_READ(TSI108_EC_INTSTAT); + + if (!(stat & TSI108_INT_ANY)) + return IRQ_NONE; /* Not our interrupt */ + + stat &= ~TSI_READ(TSI108_EC_INTMASK); + + if (stat & (TSI108_INT_TXQUEUE0 | TSI108_INT_TXIDLE | + TSI108_INT_TXERROR)) + tsi108_tx_int(dev); + if (stat & (TSI108_INT_RXQUEUE0 | TSI108_INT_RXTHRESH | + TSI108_INT_RXWAIT | TSI108_INT_RXOVERRUN | + TSI108_INT_RXERROR)) + tsi108_rx_int(dev); + + if (stat & TSI108_INT_SFN) { + if (net_ratelimit()) + printk(KERN_DEBUG "%s: SFN error\n", dev->name); + TSI_WRITE(TSI108_EC_INTSTAT, TSI108_INT_SFN); + } + + if (stat & TSI108_INT_STATCARRY) { + tsi108_stat_carry(dev); + TSI_WRITE(TSI108_EC_INTSTAT, TSI108_INT_STATCARRY); + } + + return IRQ_HANDLED; +} + +static void tsi108_stop_ethernet(struct net_device *dev) +{ + struct tsi108_prv_data *data = netdev_priv(dev); + int i = 1000; + /* Disable all TX and RX queues ... */ + TSI_WRITE(TSI108_EC_TXCTRL, 0); + TSI_WRITE(TSI108_EC_RXCTRL, 0); + + /* ...and wait for them to become idle */ + while(i--) { + if(!(TSI_READ(TSI108_EC_TXSTAT) & TSI108_EC_TXSTAT_ACTIVE)) + break; + udelay(10); + } + i = 1000; + while(i--){ + if(!(TSI_READ(TSI108_EC_RXSTAT) & TSI108_EC_RXSTAT_ACTIVE)) + return; + udelay(10); + } + printk(KERN_ERR "%s function time out \n", __FUNCTION__); +} + +static void tsi108_reset_ether(struct tsi108_prv_data * data) +{ + TSI_WRITE(TSI108_MAC_CFG1, TSI108_MAC_CFG1_SOFTRST); + udelay(100); + TSI_WRITE(TSI108_MAC_CFG1, 0); + + TSI_WRITE(TSI108_EC_PORTCTRL, TSI108_EC_PORTCTRL_STATRST); + udelay(100); + TSI_WRITE(TSI108_EC_PORTCTRL, + TSI_READ(TSI108_EC_PORTCTRL) & + ~TSI108_EC_PORTCTRL_STATRST); + + TSI_WRITE(TSI108_EC_TXCFG, TSI108_EC_TXCFG_RST); + udelay(100); + TSI_WRITE(TSI108_EC_TXCFG, + TSI_READ(TSI108_EC_TXCFG) & + ~TSI108_EC_TXCFG_RST); + + TSI_WRITE(TSI108_EC_RXCFG, TSI108_EC_RXCFG_RST); + udelay(100); + TSI_WRITE(TSI108_EC_RXCFG, + TSI_READ(TSI108_EC_RXCFG) & + ~TSI108_EC_RXCFG_RST); + + TSI_WRITE(TSI108_MAC_MII_MGMT_CFG, + TSI_READ(TSI108_MAC_MII_MGMT_CFG) | + TSI108_MAC_MII_MGMT_RST); + udelay(100); + TSI_WRITE(TSI108_MAC_MII_MGMT_CFG, + (TSI_READ(TSI108_MAC_MII_MGMT_CFG) & + ~(TSI108_MAC_MII_MGMT_RST | + TSI108_MAC_MII_MGMT_CLK)) | 0x07); +} + +static int tsi108_get_mac(struct net_device *dev) +{ + struct tsi108_prv_data *data = netdev_priv(dev); + u32 word1 = TSI_READ(TSI108_MAC_ADDR1); + u32 word2 = TSI_READ(TSI108_MAC_ADDR2); + + /* Note that the octets are reversed from what the manual says, + * producing an even weirder ordering... + */ + if (word2 == 0 && word1 == 0) { + dev->dev_addr[0] = 0x00; + dev->dev_addr[1] = 0x06; + dev->dev_addr[2] = 0xd2; + dev->dev_addr[3] = 0x00; + dev->dev_addr[4] = 0x00; + if (0x8 == data->phy) + dev->dev_addr[5] = 0x01; + else + dev->dev_addr[5] = 0x02; + + word2 = (dev->dev_addr[0] << 16) | (dev->dev_addr[1] << 24); + + word1 = (dev->dev_addr[2] << 0) | (dev->dev_addr[3] << 8) | + (dev->dev_addr[4] << 16) | (dev->dev_addr[5] << 24); + + TSI_WRITE(TSI108_MAC_ADDR1, word1); + TSI_WRITE(TSI108_MAC_ADDR2, word2); + } else { + dev->dev_addr[0] = (word2 >> 16) & 0xff; + dev->dev_addr[1] = (word2 >> 24) & 0xff; + dev->dev_addr[2] = (word1 >> 0) & 0xff; + dev->dev_addr[3] = (word1 >> 8) & 0xff; + dev->dev_addr[4] = (word1 >> 16) & 0xff; + dev->dev_addr[5] = (word1 >> 24) & 0xff; + } + + if (!is_valid_ether_addr(dev->dev_addr)) { + printk("KERN_ERR: word1: %08x, word2: %08x\n", word1, word2); + return -EINVAL; + } + + return 0; +} + +static int tsi108_set_mac(struct net_device *dev, void *addr) +{ + struct tsi108_prv_data *data = netdev_priv(dev); + u32 word1, word2; + int i; + + if (!is_valid_ether_addr(addr)) + return -EINVAL; + + for (i = 0; i < 6; i++) + /* +2 is for the offset of the HW addr type */ + dev->dev_addr[i] = ((unsigned char *)addr)[i + 2]; + + word2 = (dev->dev_addr[0] << 16) | (dev->dev_addr[1] << 24); + + word1 = (dev->dev_addr[2] << 0) | (dev->dev_addr[3] << 8) | + (dev->dev_addr[4] << 16) | (dev->dev_addr[5] << 24); + + spin_lock_irq(&data->misclock); + TSI_WRITE(TSI108_MAC_ADDR1, word1); + TSI_WRITE(TSI108_MAC_ADDR2, word2); + spin_lock(&data->txlock); + + if (data->txfree && data->link_up) + netif_wake_queue(dev); + + spin_unlock(&data->txlock); + spin_unlock_irq(&data->misclock); + return 0; +} + +/* Protected by dev->xmit_lock. */ +static void tsi108_set_rx_mode(struct net_device *dev) +{ + struct tsi108_prv_data *data = netdev_priv(dev); + u32 rxcfg = TSI_READ(TSI108_EC_RXCFG); + + if (dev->flags & IFF_PROMISC) { + rxcfg &= ~(TSI108_EC_RXCFG_UC_HASH | TSI108_EC_RXCFG_MC_HASH); + rxcfg |= TSI108_EC_RXCFG_UFE | TSI108_EC_RXCFG_MFE; + goto out; + } + + rxcfg &= ~(TSI108_EC_RXCFG_UFE | TSI108_EC_RXCFG_MFE); + + if (dev->flags & IFF_ALLMULTI || dev->mc_count) { + int i; + struct dev_mc_list *mc = dev->mc_list; + rxcfg |= TSI108_EC_RXCFG_MFE | TSI108_EC_RXCFG_MC_HASH; + + memset(data->mc_hash, 0, sizeof(data->mc_hash)); + + while (mc) { + u32 hash, crc; + + if (mc->dmi_addrlen == 6) { + crc = ether_crc(6, mc->dmi_addr); + hash = crc >> 23; + + __set_bit(hash, &data->mc_hash[0]); + } else { + printk(KERN_ERR + "%s: got multicast address of length %d " + "instead of 6.\n", dev->name, + mc->dmi_addrlen); + } + + mc = mc->next; + } + + TSI_WRITE(TSI108_EC_HASHADDR, + TSI108_EC_HASHADDR_AUTOINC | + TSI108_EC_HASHADDR_MCAST); + + for (i = 0; i < 16; i++) { + /* The manual says that the hardware may drop + * back-to-back writes to the data register. + */ + udelay(1); + TSI_WRITE(TSI108_EC_HASHDATA, + data->mc_hash[i]); + } + } + + out: + TSI_WRITE(TSI108_EC_RXCFG, rxcfg); +} + +static void tsi108_init_phy(struct net_device *dev) +{ + struct tsi108_prv_data *data = netdev_priv(dev); + u32 i = 0; + u16 phyval = 0; + unsigned long flags; + + spin_lock_irqsave(&phy_lock, flags); + + tsi108_write_mii(data, MII_BMCR, BMCR_RESET); + while (i--){ + if(!(tsi108_read_mii(data, MII_BMCR) & BMCR_RESET)) + break; + udelay(10); + } + if (i == 0) + printk(KERN_ERR "%s function time out \n", __FUNCTION__); + +#if (TSI108_PHY_TYPE == PHY_BCM54XX) /* Broadcom BCM54xx PHY */ + tsi108_write_mii(data, 0x09, 0x0300); + tsi108_write_mii(data, 0x10, 0x1020); + tsi108_write_mii(data, 0x1c, 0x8c00); +#endif + + tsi108_write_mii(data, + MII_BMCR, + BMCR_ANENABLE | BMCR_ANRESTART); + while (tsi108_read_mii(data, MII_BMCR) & BMCR_ANRESTART) + cpu_relax(); + + /* Set G/MII mode and receive clock select in TBI control #2. The + * second port won't work if this isn't done, even though we don't + * use TBI mode. + */ + + tsi108_write_tbi(data, 0x11, 0x30); + + /* FIXME: It seems to take more than 2 back-to-back reads to the + * PHY_STAT register before the link up status bit is set. + */ + + data->link_up = 1; + + while (!((phyval = tsi108_read_mii(data, MII_BMSR)) & + BMSR_LSTATUS)) { + if (i++ > (MII_READ_DELAY / 10)) { + data->link_up = 0; + break; + } + spin_unlock_irqrestore(&phy_lock, flags); + msleep(10); + spin_lock_irqsave(&phy_lock, flags); + } + + printk(KERN_DEBUG "PHY_STAT reg contains %08x\n", phyval); + data->phy_ok = 1; + data->init_media = 1; + spin_unlock_irqrestore(&phy_lock, flags); +} + +static void tsi108_kill_phy(struct net_device *dev) +{ + struct tsi108_prv_data *data = netdev_priv(dev); + unsigned long flags; + + spin_lock_irqsave(&phy_lock, flags); + tsi108_write_mii(data, MII_BMCR, BMCR_PDOWN); + data->phy_ok = 0; + spin_unlock_irqrestore(&phy_lock, flags); +} + +static int tsi108_open(struct net_device *dev) +{ + int i; + struct tsi108_prv_data *data = netdev_priv(dev); + unsigned int rxring_size = TSI108_RXRING_LEN * sizeof(rx_desc); + unsigned int txring_size = TSI108_TXRING_LEN * sizeof(tx_desc); + + i = request_irq(data->irq_num, tsi108_irq, 0, dev->name, dev); + if (i != 0) { + printk(KERN_ERR "tsi108_eth%d: Could not allocate IRQ%d.\n", + data->id, data->irq_num); + return i; + } else { + dev->irq = data->irq_num; + printk(KERN_NOTICE + "tsi108_open : Port %d Assigned IRQ %d to %s\n", + data->id, dev->irq, dev->name); + } + + data->rxring = dma_alloc_coherent(NULL, rxring_size, + &data->rxdma, GFP_KERNEL); + + if (!data->rxring) { + printk(KERN_DEBUG + "TSI108_ETH: failed to allocate memory for rxring!\n"); + return -ENOMEM; + } else { + memset(data->rxring, 0, rxring_size); + } + + data->txring = dma_alloc_coherent(NULL, txring_size, + &data->txdma, GFP_KERNEL); + + if (!data->txring) { + printk(KERN_DEBUG + "TSI108_ETH: failed to allocate memory for txring!\n"); + pci_free_consistent(0, rxring_size, data->rxring, data->rxdma); + return -ENOMEM; + } else { + memset(data->txring, 0, txring_size); + } + + for (i = 0; i < TSI108_RXRING_LEN; i++) { + data->rxring[i].next0 = data->rxdma + (i + 1) * sizeof(rx_desc); + data->rxring[i].blen = TSI108_RXBUF_SIZE; + data->rxring[i].vlan = 0; + } + + data->rxring[TSI108_RXRING_LEN - 1].next0 = data->rxdma; + + data->rxtail = 0; + data->rxhead = 0; + + for (i = 0; i < TSI108_RXRING_LEN; i++) { + struct sk_buff *skb = dev_alloc_skb(TSI108_RXBUF_SIZE + NET_IP_ALIGN); + + if (!skb) { + /* Bah. No memory for now, but maybe we'll get + * some more later. + * For now, we'll live with the smaller ring. + */ + printk(KERN_WARNING + "%s: Could only allocate %d receive skb(s).\n", + dev->name, i); + data->rxhead = i; + break; + } + + data->rxskbs[i] = skb; + /* Align the payload on a 4-byte boundary */ + skb_reserve(skb, 2); + data->rxskbs[i] = skb; + data->rxring[i].buf0 = virt_to_phys(data->rxskbs[i]->data); + data->rxring[i].misc = TSI108_RX_OWN | TSI108_RX_INT; + } + + data->rxfree = i; + TSI_WRITE(TSI108_EC_RXQ_PTRLOW, data->rxdma); + + for (i = 0; i < TSI108_TXRING_LEN; i++) { + data->txring[i].next0 = data->txdma + (i + 1) * sizeof(tx_desc); + data->txring[i].misc = 0; + } + + data->txring[TSI108_TXRING_LEN - 1].next0 = data->txdma; + data->txtail = 0; + data->txhead = 0; + data->txfree = TSI108_TXRING_LEN; + TSI_WRITE(TSI108_EC_TXQ_PTRLOW, data->txdma); + tsi108_init_phy(dev); + + setup_timer(&data->timer, tsi108_timed_checker, (unsigned long)dev); + mod_timer(&data->timer, jiffies + 1); + + tsi108_restart_rx(data, dev); + + TSI_WRITE(TSI108_EC_INTSTAT, ~0); + + TSI_WRITE(TSI108_EC_INTMASK, + ~(TSI108_INT_TXQUEUE0 | TSI108_INT_RXERROR | + TSI108_INT_RXTHRESH | TSI108_INT_RXQUEUE0 | + TSI108_INT_RXOVERRUN | TSI108_INT_RXWAIT | + TSI108_INT_SFN | TSI108_INT_STATCARRY)); + + TSI_WRITE(TSI108_MAC_CFG1, + TSI108_MAC_CFG1_RXEN | TSI108_MAC_CFG1_TXEN); + netif_start_queue(dev); + return 0; +} + +static int tsi108_close(struct net_device *dev) +{ + struct tsi108_prv_data *data = netdev_priv(dev); + + netif_stop_queue(dev); + + del_timer_sync(&data->timer); + + tsi108_stop_ethernet(dev); + tsi108_kill_phy(dev); + TSI_WRITE(TSI108_EC_INTMASK, ~0); + TSI_WRITE(TSI108_MAC_CFG1, 0); + + /* Check for any pending TX packets, and drop them. */ + + while (!data->txfree || data->txhead != data->txtail) { + int tx = data->txtail; + struct sk_buff *skb; + skb = data->txskbs[tx]; + data->txtail = (data->txtail + 1) % TSI108_TXRING_LEN; + data->txfree++; + dev_kfree_skb(skb); + } + + synchronize_irq(data->irq_num); + free_irq(data->irq_num, dev); + + /* Discard the RX ring. */ + + while (data->rxfree) { + int rx = data->rxtail; + struct sk_buff *skb; + + skb = data->rxskbs[rx]; + data->rxtail = (data->rxtail + 1) % TSI108_RXRING_LEN; + data->rxfree--; + dev_kfree_skb(skb); + } + + dma_free_coherent(0, + TSI108_RXRING_LEN * sizeof(rx_desc), + data->rxring, data->rxdma); + dma_free_coherent(0, + TSI108_TXRING_LEN * sizeof(tx_desc), + data->txring, data->txdma); + + return 0; +} + +static void tsi108_init_mac(struct net_device *dev) +{ + struct tsi108_prv_data *data = netdev_priv(dev); + + TSI_WRITE(TSI108_MAC_CFG2, TSI108_MAC_CFG2_DFLT_PREAMBLE | + TSI108_MAC_CFG2_PADCRC); + + TSI_WRITE(TSI108_EC_TXTHRESH, + (192 << TSI108_EC_TXTHRESH_STARTFILL) | + (192 << TSI108_EC_TXTHRESH_STOPFILL)); + + TSI_WRITE(TSI108_STAT_CARRYMASK1, + ~(TSI108_STAT_CARRY1_RXBYTES | + TSI108_STAT_CARRY1_RXPKTS | + TSI108_STAT_CARRY1_RXFCS | + TSI108_STAT_CARRY1_RXMCAST | + TSI108_STAT_CARRY1_RXALIGN | + TSI108_STAT_CARRY1_RXLENGTH | + TSI108_STAT_CARRY1_RXRUNT | + TSI108_STAT_CARRY1_RXJUMBO | + TSI108_STAT_CARRY1_RXFRAG | + TSI108_STAT_CARRY1_RXJABBER | + TSI108_STAT_CARRY1_RXDROP)); + + TSI_WRITE(TSI108_STAT_CARRYMASK2, + ~(TSI108_STAT_CARRY2_TXBYTES | + TSI108_STAT_CARRY2_TXPKTS | + TSI108_STAT_CARRY2_TXEXDEF | + TSI108_STAT_CARRY2_TXEXCOL | + TSI108_STAT_CARRY2_TXTCOL | + TSI108_STAT_CARRY2_TXPAUSE)); + + TSI_WRITE(TSI108_EC_PORTCTRL, TSI108_EC_PORTCTRL_STATEN); + TSI_WRITE(TSI108_MAC_CFG1, 0); + + TSI_WRITE(TSI108_EC_RXCFG, + TSI108_EC_RXCFG_SE | TSI108_EC_RXCFG_BFE); + + TSI_WRITE(TSI108_EC_TXQ_CFG, TSI108_EC_TXQ_CFG_DESC_INT | + TSI108_EC_TXQ_CFG_EOQ_OWN_INT | + TSI108_EC_TXQ_CFG_WSWP | (TSI108_PBM_PORT << + TSI108_EC_TXQ_CFG_SFNPORT)); + + TSI_WRITE(TSI108_EC_RXQ_CFG, TSI108_EC_RXQ_CFG_DESC_INT | + TSI108_EC_RXQ_CFG_EOQ_OWN_INT | + TSI108_EC_RXQ_CFG_WSWP | (TSI108_PBM_PORT << + TSI108_EC_RXQ_CFG_SFNPORT)); + + TSI_WRITE(TSI108_EC_TXQ_BUFCFG, + TSI108_EC_TXQ_BUFCFG_BURST256 | + TSI108_EC_TXQ_BUFCFG_BSWP | (TSI108_PBM_PORT << + TSI108_EC_TXQ_BUFCFG_SFNPORT)); + + TSI_WRITE(TSI108_EC_RXQ_BUFCFG, + TSI108_EC_RXQ_BUFCFG_BURST256 | + TSI108_EC_RXQ_BUFCFG_BSWP | (TSI108_PBM_PORT << + TSI108_EC_RXQ_BUFCFG_SFNPORT)); + + TSI_WRITE(TSI108_EC_INTMASK, ~0); +} + +static int tsi108_do_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) +{ + struct tsi108_prv_data *data = netdev_priv(dev); + return generic_mii_ioctl(&data->mii_if, if_mii(rq), cmd, NULL); +} + +static int +tsi108_init_one(struct platform_device *pdev) +{ + struct net_device *dev = NULL; + struct tsi108_prv_data *data = NULL; + hw_info *einfo; + int err = 0; + + einfo = pdev->dev.platform_data; + + if (NULL == einfo) { + printk(KERN_ERR "tsi-eth %d: Missing additional data!\n", + pdev->id); + return -ENODEV; + } + + /* Create an ethernet device instance */ + + dev = alloc_etherdev(sizeof(struct tsi108_prv_data)); + if (!dev) { + printk("tsi108_eth: Could not allocate a device structure\n"); + return -ENOMEM; + } + + printk("tsi108_eth%d: probe...\n", pdev->id); + data = netdev_priv(dev); + + pr_debug("tsi108_eth%d:regs:phyresgs:phy:irq_num=0x%x:0x%x:0x%x:0x%x\n", + pdev->id, einfo->regs, einfo->phyregs, + einfo->phy, einfo->irq_num); + + data->regs = ioremap(einfo->regs, 0x400); + if (NULL == data->regs) { + err = -ENOMEM; + goto regs_fail; + } + + data->phyregs = ioremap(einfo->phyregs, 0x400); + if (NULL == data->phyregs) { + err = -ENOMEM; + goto regs_fail; + } +/* MII setup */ + data->mii_if.dev = dev; + data->mii_if.mdio_read = tsi108_mdio_read; + data->mii_if.mdio_write = tsi108_mdio_write; + data->mii_if.phy_id = einfo->phy; + data->mii_if.phy_id_mask = 0x1f; + data->mii_if.reg_num_mask = 0x1f; + data->mii_if.supports_gmii = mii_check_gmii_support(&data->mii_if); + + data->phy = einfo->phy; + data->irq_num = einfo->irq_num; + data->id = pdev->id; + dev->open = tsi108_open; + dev->stop = tsi108_close; + dev->hard_start_xmit = tsi108_send_packet; + dev->set_mac_address = tsi108_set_mac; + dev->set_multicast_list = tsi108_set_rx_mode; + dev->get_stats = tsi108_get_stats; + dev->poll = tsi108_poll; + dev->do_ioctl = tsi108_do_ioctl; + dev->weight = 64; /* 64 is more suitable for GigE interface - klai */ + + /* Apparently, the Linux networking code won't use scatter-gather + * if the hardware doesn't do checksums. However, it's faster + * to checksum in place and use SG, as (among other reasons) + * the cache won't be dirtied (which then has to be flushed + * before DMA). The checksumming is done by the driver (via + * a new function skb_csum_dev() in net/core/skbuff.c). + */ + + dev->features = NETIF_F_HIGHDMA; + SET_MODULE_OWNER(dev); + + spin_lock_init(&data->txlock); + spin_lock_init(&data->misclock); + + tsi108_reset_ether(data); + tsi108_kill_phy(dev); + + if ((err = tsi108_get_mac(dev)) != 0) { + printk(KERN_ERR "%s: Invalid MAC address. Please correct.\n", + dev->name); + goto register_fail; + } + + tsi108_init_mac(dev); + err = register_netdev(dev); + if (err) { + printk(KERN_ERR "%s: Cannot register net device, aborting.\n", + dev->name); + goto register_fail; + } + + printk(KERN_INFO "%s: Tsi108 Gigabit Ethernet, MAC: " + "%02x:%02x:%02x:%02x:%02x:%02x\n", dev->name, + dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2], + dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5]); +#ifdef DEBUG + data->msg_enable = DEBUG; + dump_eth_one(dev); +#endif + + return 0; + +register_fail: + iounmap(data->regs); + iounmap(data->phyregs); + +regs_fail: + free_netdev(dev); + return err; +} + +/* There's no way to either get interrupts from the PHY when + * something changes, or to have the Tsi108 automatically communicate + * with the PHY to reconfigure itself. + * + * Thus, we have to do it using a timer. + */ + +static void tsi108_timed_checker(unsigned long dev_ptr) +{ + struct net_device *dev = (struct net_device *)dev_ptr; + struct tsi108_prv_data *data = netdev_priv(dev); + + tsi108_check_phy(dev); + tsi108_check_rxring(dev); + mod_timer(&data->timer, jiffies + CHECK_PHY_INTERVAL); +} + +static int tsi108_ether_init(void) +{ + int ret; + ret = platform_driver_register (&tsi_eth_driver); + if (ret < 0){ + printk("tsi108_ether_init: error initializing ethernet " + "device\n"); + return ret; + } + return 0; +} + +static int tsi108_ether_remove(struct platform_device *pdev) +{ + struct net_device *dev = platform_get_drvdata(pdev); + struct tsi108_prv_data *priv = netdev_priv(dev); + + unregister_netdev(dev); + tsi108_stop_ethernet(dev); + platform_set_drvdata(pdev, NULL); + iounmap(priv->regs); + iounmap(priv->phyregs); + free_netdev(dev); + + return 0; +} +static void tsi108_ether_exit(void) +{ + platform_driver_unregister(&tsi_eth_driver); +} + +module_init(tsi108_ether_init); +module_exit(tsi108_ether_exit); + +MODULE_AUTHOR("Tundra Semiconductor Corporation"); +MODULE_DESCRIPTION("Tsi108 Gigabit Ethernet driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/net/tsi108_eth.h b/drivers/net/tsi108_eth.h new file mode 100644 index 00000000000..77a769df228 --- /dev/null +++ b/drivers/net/tsi108_eth.h @@ -0,0 +1,365 @@ +/* + * (C) Copyright 2005 Tundra Semiconductor Corp. + * Kong Lai, <kong.lai@tundra.com). + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * net/tsi108_eth.h - definitions for Tsi108 GIGE network controller. + */ + +#ifndef __TSI108_ETH_H +#define __TSI108_ETH_H + +#include <linux/types.h> + +#define TSI_WRITE(offset, val) \ + out_be32((data->regs + (offset)), val) + +#define TSI_READ(offset) \ + in_be32((data->regs + (offset))) + +#define TSI_WRITE_PHY(offset, val) \ + out_be32((data->phyregs + (offset)), val) + +#define TSI_READ_PHY(offset) \ + in_be32((data->phyregs + (offset))) + +/* + * PHY Configuration Options + * + * NOTE: Enable set of definitions corresponding to your board type + */ +#define PHY_MV88E 1 /* Marvel 88Exxxx PHY */ +#define PHY_BCM54XX 2 /* Broardcom BCM54xx PHY */ +#define TSI108_PHY_TYPE PHY_MV88E + +/* + * TSI108 GIGE port registers + */ + +#define TSI108_ETH_PORT_NUM 2 +#define TSI108_PBM_PORT 2 +#define TSI108_SDRAM_PORT 4 + +#define TSI108_MAC_CFG1 (0x000) +#define TSI108_MAC_CFG1_SOFTRST (1 << 31) +#define TSI108_MAC_CFG1_LOOPBACK (1 << 8) +#define TSI108_MAC_CFG1_RXEN (1 << 2) +#define TSI108_MAC_CFG1_TXEN (1 << 0) + +#define TSI108_MAC_CFG2 (0x004) +#define TSI108_MAC_CFG2_DFLT_PREAMBLE (7 << 12) +#define TSI108_MAC_CFG2_IFACE_MASK (3 << 8) +#define TSI108_MAC_CFG2_NOGIG (1 << 8) +#define TSI108_MAC_CFG2_GIG (2 << 8) +#define TSI108_MAC_CFG2_PADCRC (1 << 2) +#define TSI108_MAC_CFG2_FULLDUPLEX (1 << 0) + +#define TSI108_MAC_MII_MGMT_CFG (0x020) +#define TSI108_MAC_MII_MGMT_CLK (7 << 0) +#define TSI108_MAC_MII_MGMT_RST (1 << 31) + +#define TSI108_MAC_MII_CMD (0x024) +#define TSI108_MAC_MII_CMD_READ (1 << 0) + +#define TSI108_MAC_MII_ADDR (0x028) +#define TSI108_MAC_MII_ADDR_REG 0 +#define TSI108_MAC_MII_ADDR_PHY 8 + +#define TSI108_MAC_MII_DATAOUT (0x02c) +#define TSI108_MAC_MII_DATAIN (0x030) + +#define TSI108_MAC_MII_IND (0x034) +#define TSI108_MAC_MII_IND_NOTVALID (1 << 2) +#define TSI108_MAC_MII_IND_SCANNING (1 << 1) +#define TSI108_MAC_MII_IND_BUSY (1 << 0) + +#define TSI108_MAC_IFCTRL (0x038) +#define TSI108_MAC_IFCTRL_PHYMODE (1 << 24) + +#define TSI108_MAC_ADDR1 (0x040) +#define TSI108_MAC_ADDR2 (0x044) + +#define TSI108_STAT_RXBYTES (0x06c) +#define TSI108_STAT_RXBYTES_CARRY (1 << 24) + +#define TSI108_STAT_RXPKTS (0x070) +#define TSI108_STAT_RXPKTS_CARRY (1 << 18) + +#define TSI108_STAT_RXFCS (0x074) +#define TSI108_STAT_RXFCS_CARRY (1 << 12) + +#define TSI108_STAT_RXMCAST (0x078) +#define TSI108_STAT_RXMCAST_CARRY (1 << 18) + +#define TSI108_STAT_RXALIGN (0x08c) +#define TSI108_STAT_RXALIGN_CARRY (1 << 12) + +#define TSI108_STAT_RXLENGTH (0x090) +#define TSI108_STAT_RXLENGTH_CARRY (1 << 12) + +#define TSI108_STAT_RXRUNT (0x09c) +#define TSI108_STAT_RXRUNT_CARRY (1 << 12) + +#define TSI108_STAT_RXJUMBO (0x0a0) +#define TSI108_STAT_RXJUMBO_CARRY (1 << 12) + +#define TSI108_STAT_RXFRAG (0x0a4) +#define TSI108_STAT_RXFRAG_CARRY (1 << 12) + +#define TSI108_STAT_RXJABBER (0x0a8) +#define TSI108_STAT_RXJABBER_CARRY (1 << 12) + +#define TSI108_STAT_RXDROP (0x0ac) +#define TSI108_STAT_RXDROP_CARRY (1 << 12) + +#define TSI108_STAT_TXBYTES (0x0b0) +#define TSI108_STAT_TXBYTES_CARRY (1 << 24) + +#define TSI108_STAT_TXPKTS (0x0b4) +#define TSI108_STAT_TXPKTS_CARRY (1 << 18) + +#define TSI108_STAT_TXEXDEF (0x0c8) +#define TSI108_STAT_TXEXDEF_CARRY (1 << 12) + +#define TSI108_STAT_TXEXCOL (0x0d8) +#define TSI108_STAT_TXEXCOL_CARRY (1 << 12) + +#define TSI108_STAT_TXTCOL (0x0dc) +#define TSI108_STAT_TXTCOL_CARRY (1 << 13) + +#define TSI108_STAT_TXPAUSEDROP (0x0e4) +#define TSI108_STAT_TXPAUSEDROP_CARRY (1 << 12) + +#define TSI108_STAT_CARRY1 (0x100) +#define TSI108_STAT_CARRY1_RXBYTES (1 << 16) +#define TSI108_STAT_CARRY1_RXPKTS (1 << 15) +#define TSI108_STAT_CARRY1_RXFCS (1 << 14) +#define TSI108_STAT_CARRY1_RXMCAST (1 << 13) +#define TSI108_STAT_CARRY1_RXALIGN (1 << 8) +#define TSI108_STAT_CARRY1_RXLENGTH (1 << 7) +#define TSI108_STAT_CARRY1_RXRUNT (1 << 4) +#define TSI108_STAT_CARRY1_RXJUMBO (1 << 3) +#define TSI108_STAT_CARRY1_RXFRAG (1 << 2) +#define TSI108_STAT_CARRY1_RXJABBER (1 << 1) +#define TSI108_STAT_CARRY1_RXDROP (1 << 0) + +#define TSI108_STAT_CARRY2 (0x104) +#define TSI108_STAT_CARRY2_TXBYTES (1 << 13) +#define TSI108_STAT_CARRY2_TXPKTS (1 << 12) +#define TSI108_STAT_CARRY2_TXEXDEF (1 << 7) +#define TSI108_STAT_CARRY2_TXEXCOL (1 << 3) +#define TSI108_STAT_CARRY2_TXTCOL (1 << 2) +#define TSI108_STAT_CARRY2_TXPAUSE (1 << 0) + +#define TSI108_STAT_CARRYMASK1 (0x108) +#define TSI108_STAT_CARRYMASK2 (0x10c) + +#define TSI108_EC_PORTCTRL (0x200) +#define TSI108_EC_PORTCTRL_STATRST (1 << 31) +#define TSI108_EC_PORTCTRL_STATEN (1 << 28) +#define TSI108_EC_PORTCTRL_NOGIG (1 << 18) +#define TSI108_EC_PORTCTRL_HALFDUPLEX (1 << 16) + +#define TSI108_EC_INTSTAT (0x204) +#define TSI108_EC_INTMASK (0x208) + +#define TSI108_INT_ANY (1 << 31) +#define TSI108_INT_SFN (1 << 30) +#define TSI108_INT_RXIDLE (1 << 29) +#define TSI108_INT_RXABORT (1 << 28) +#define TSI108_INT_RXERROR (1 << 27) +#define TSI108_INT_RXOVERRUN (1 << 26) +#define TSI108_INT_RXTHRESH (1 << 25) +#define TSI108_INT_RXWAIT (1 << 24) +#define TSI108_INT_RXQUEUE0 (1 << 16) +#define TSI108_INT_STATCARRY (1 << 15) +#define TSI108_INT_TXIDLE (1 << 13) +#define TSI108_INT_TXABORT (1 << 12) +#define TSI108_INT_TXERROR (1 << 11) +#define TSI108_INT_TXUNDERRUN (1 << 10) +#define TSI108_INT_TXTHRESH (1 << 9) +#define TSI108_INT_TXWAIT (1 << 8) +#define TSI108_INT_TXQUEUE0 (1 << 0) + +#define TSI108_EC_TXCFG (0x220) +#define TSI108_EC_TXCFG_RST (1 << 31) + +#define TSI108_EC_TXCTRL (0x224) +#define TSI108_EC_TXCTRL_IDLEINT (1 << 31) +#define TSI108_EC_TXCTRL_ABORT (1 << 30) +#define TSI108_EC_TXCTRL_GO (1 << 15) +#define TSI108_EC_TXCTRL_QUEUE0 (1 << 0) + +#define TSI108_EC_TXSTAT (0x228) +#define TSI108_EC_TXSTAT_ACTIVE (1 << 15) +#define TSI108_EC_TXSTAT_QUEUE0 (1 << 0) + +#define TSI108_EC_TXESTAT (0x22c) +#define TSI108_EC_TXESTAT_Q0_ERR (1 << 24) +#define TSI108_EC_TXESTAT_Q0_DESCINT (1 << 16) +#define TSI108_EC_TXESTAT_Q0_EOF (1 << 8) +#define TSI108_EC_TXESTAT_Q0_EOQ (1 << 0) + +#define TSI108_EC_TXERR (0x278) + +#define TSI108_EC_TXQ_CFG (0x280) +#define TSI108_EC_TXQ_CFG_DESC_INT (1 << 20) +#define TSI108_EC_TXQ_CFG_EOQ_OWN_INT (1 << 19) +#define TSI108_EC_TXQ_CFG_WSWP (1 << 11) +#define TSI108_EC_TXQ_CFG_BSWP (1 << 10) +#define TSI108_EC_TXQ_CFG_SFNPORT 0 + +#define TSI108_EC_TXQ_BUFCFG (0x284) +#define TSI108_EC_TXQ_BUFCFG_BURST8 (0 << 8) +#define TSI108_EC_TXQ_BUFCFG_BURST32 (1 << 8) +#define TSI108_EC_TXQ_BUFCFG_BURST128 (2 << 8) +#define TSI108_EC_TXQ_BUFCFG_BURST256 (3 << 8) +#define TSI108_EC_TXQ_BUFCFG_WSWP (1 << 11) +#define TSI108_EC_TXQ_BUFCFG_BSWP (1 << 10) +#define TSI108_EC_TXQ_BUFCFG_SFNPORT 0 + +#define TSI108_EC_TXQ_PTRLOW (0x288) + +#define TSI108_EC_TXQ_PTRHIGH (0x28c) +#define TSI108_EC_TXQ_PTRHIGH_VALID (1 << 31) + +#define TSI108_EC_TXTHRESH (0x230) +#define TSI108_EC_TXTHRESH_STARTFILL 0 +#define TSI108_EC_TXTHRESH_STOPFILL 16 + +#define TSI108_EC_RXCFG (0x320) +#define TSI108_EC_RXCFG_RST (1 << 31) + +#define TSI108_EC_RXSTAT (0x328) +#define TSI108_EC_RXSTAT_ACTIVE (1 << 15) +#define TSI108_EC_RXSTAT_QUEUE0 (1 << 0) + +#define TSI108_EC_RXESTAT (0x32c) +#define TSI108_EC_RXESTAT_Q0_ERR (1 << 24) +#define TSI108_EC_RXESTAT_Q0_DESCINT (1 << 16) +#define TSI108_EC_RXESTAT_Q0_EOF (1 << 8) +#define TSI108_EC_RXESTAT_Q0_EOQ (1 << 0) + +#define TSI108_EC_HASHADDR (0x360) +#define TSI108_EC_HASHADDR_AUTOINC (1 << 31) +#define TSI108_EC_HASHADDR_DO1STREAD (1 << 30) +#define TSI108_EC_HASHADDR_UNICAST (0 << 4) +#define TSI108_EC_HASHADDR_MCAST (1 << 4) + +#define TSI108_EC_HASHDATA (0x364) + +#define TSI108_EC_RXQ_PTRLOW (0x388) + +#define TSI108_EC_RXQ_PTRHIGH (0x38c) +#define TSI108_EC_RXQ_PTRHIGH_VALID (1 << 31) + +/* Station Enable -- accept packets destined for us */ +#define TSI108_EC_RXCFG_SE (1 << 13) +/* Unicast Frame Enable -- for packets not destined for us */ +#define TSI108_EC_RXCFG_UFE (1 << 12) +/* Multicast Frame Enable */ +#define TSI108_EC_RXCFG_MFE (1 << 11) +/* Broadcast Frame Enable */ +#define TSI108_EC_RXCFG_BFE (1 << 10) +#define TSI108_EC_RXCFG_UC_HASH (1 << 9) +#define TSI108_EC_RXCFG_MC_HASH (1 << 8) + +#define TSI108_EC_RXQ_CFG (0x380) +#define TSI108_EC_RXQ_CFG_DESC_INT (1 << 20) +#define TSI108_EC_RXQ_CFG_EOQ_OWN_INT (1 << 19) +#define TSI108_EC_RXQ_CFG_WSWP (1 << 11) +#define TSI108_EC_RXQ_CFG_BSWP (1 << 10) +#define TSI108_EC_RXQ_CFG_SFNPORT 0 + +#define TSI108_EC_RXQ_BUFCFG (0x384) +#define TSI108_EC_RXQ_BUFCFG_BURST8 (0 << 8) +#define TSI108_EC_RXQ_BUFCFG_BURST32 (1 << 8) +#define TSI108_EC_RXQ_BUFCFG_BURST128 (2 << 8) +#define TSI108_EC_RXQ_BUFCFG_BURST256 (3 << 8) +#define TSI108_EC_RXQ_BUFCFG_WSWP (1 << 11) +#define TSI108_EC_RXQ_BUFCFG_BSWP (1 << 10) +#define TSI108_EC_RXQ_BUFCFG_SFNPORT 0 + +#define TSI108_EC_RXCTRL (0x324) +#define TSI108_EC_RXCTRL_ABORT (1 << 30) +#define TSI108_EC_RXCTRL_GO (1 << 15) +#define TSI108_EC_RXCTRL_QUEUE0 (1 << 0) + +#define TSI108_EC_RXERR (0x378) + +#define TSI108_TX_EOF (1 << 0) /* End of frame; last fragment of packet */ +#define TSI108_TX_SOF (1 << 1) /* Start of frame; first frag. of packet */ +#define TSI108_TX_VLAN (1 << 2) /* Per-frame VLAN: enables VLAN override */ +#define TSI108_TX_HUGE (1 << 3) /* Huge frame enable */ +#define TSI108_TX_PAD (1 << 4) /* Pad the packet if too short */ +#define TSI108_TX_CRC (1 << 5) /* Generate CRC for this packet */ +#define TSI108_TX_INT (1 << 14) /* Generate an IRQ after frag. processed */ +#define TSI108_TX_RETRY (0xf << 16) /* 4 bit field indicating num. of retries */ +#define TSI108_TX_COL (1 << 20) /* Set if a collision occured */ +#define TSI108_TX_LCOL (1 << 24) /* Set if a late collision occured */ +#define TSI108_TX_UNDER (1 << 25) /* Set if a FIFO underrun occured */ +#define TSI108_TX_RLIM (1 << 26) /* Set if the retry limit was reached */ +#define TSI108_TX_OK (1 << 30) /* Set if the frame TX was successful */ +#define TSI108_TX_OWN (1 << 31) /* Set if the device owns the descriptor */ + +/* Note: the descriptor layouts assume big-endian byte order. */ +typedef struct { + u32 buf0; + u32 buf1; /* Base address of buffer */ + u32 next0; /* Address of next descriptor, if any */ + u32 next1; + u16 vlan; /* VLAN, if override enabled for this packet */ + u16 len; /* Length of buffer in bytes */ + u32 misc; /* See TSI108_TX_* above */ + u32 reserved0; /*reserved0 and reserved1 are added to make the desc */ + u32 reserved1; /* 32-byte aligned */ +} __attribute__ ((aligned(32))) tx_desc; + +#define TSI108_RX_EOF (1 << 0) /* End of frame; last fragment of packet */ +#define TSI108_RX_SOF (1 << 1) /* Start of frame; first frag. of packet */ +#define TSI108_RX_VLAN (1 << 2) /* Set on SOF if packet has a VLAN */ +#define TSI108_RX_FTYPE (1 << 3) /* Length/Type field is type, not length */ +#define TSI108_RX_RUNT (1 << 4)/* Packet is less than minimum size */ +#define TSI108_RX_HASH (1 << 7)/* Hash table match */ +#define TSI108_RX_BAD (1 << 8) /* Bad frame */ +#define TSI108_RX_OVER (1 << 9) /* FIFO overrun occured */ +#define TSI108_RX_TRUNC (1 << 11) /* Packet truncated due to excess length */ +#define TSI108_RX_CRC (1 << 12) /* Packet had a CRC error */ +#define TSI108_RX_INT (1 << 13) /* Generate an IRQ after frag. processed */ +#define TSI108_RX_OWN (1 << 15) /* Set if the device owns the descriptor */ + +#define TSI108_RX_SKB_SIZE 1536 /* The RX skb length */ + +typedef struct { + u32 buf0; /* Base address of buffer */ + u32 buf1; /* Base address of buffer */ + u32 next0; /* Address of next descriptor, if any */ + u32 next1; /* Address of next descriptor, if any */ + u16 vlan; /* VLAN of received packet, first frag only */ + u16 len; /* Length of received fragment in bytes */ + u16 blen; /* Length of buffer in bytes */ + u16 misc; /* See TSI108_RX_* above */ + u32 reserved0; /* reserved0 and reserved1 are added to make the desc */ + u32 reserved1; /* 32-byte aligned */ +} __attribute__ ((aligned(32))) rx_desc; + +#endif /* __TSI108_ETH_H */ diff --git a/drivers/net/tulip/de2104x.c b/drivers/net/tulip/de2104x.c index f6b3a94e97b..9d67f11422e 100644 --- a/drivers/net/tulip/de2104x.c +++ b/drivers/net/tulip/de2104x.c @@ -1906,9 +1906,7 @@ fill_defaults: de->media[i].csr15 = t21041_csr15[i]; } - de->ee_data = kmalloc(DE_EEPROM_SIZE, GFP_KERNEL); - if (de->ee_data) - memcpy(de->ee_data, &ee_data[0], DE_EEPROM_SIZE); + de->ee_data = kmemdup(&ee_data[0], DE_EEPROM_SIZE, GFP_KERNEL); return; diff --git a/drivers/net/tulip/dmfe.c b/drivers/net/tulip/dmfe.c index 4dd8a0bae86..7f59a3d4fda 100644 --- a/drivers/net/tulip/dmfe.c +++ b/drivers/net/tulip/dmfe.c @@ -187,7 +187,7 @@ struct rx_desc { struct dmfe_board_info { u32 chip_id; /* Chip vendor/Device ID */ u32 chip_revision; /* Chip revision */ - struct DEVICE *next_dev; /* next device */ + struct DEVICE *dev; /* net device */ struct pci_dev *pdev; /* PCI device */ spinlock_t lock; @@ -399,6 +399,8 @@ static int __devinit dmfe_init_one (struct pci_dev *pdev, /* Init system & device */ db = netdev_priv(dev); + db->dev = dev; + /* Allocate Tx/Rx descriptor memory */ db->desc_pool_ptr = pci_alloc_consistent(pdev, sizeof(struct tx_desc) * DESC_ALL_CNT + 0x20, &db->desc_pool_dma_ptr); db->buf_pool_ptr = pci_alloc_consistent(pdev, TX_BUF_ALLOC * TX_DESC_CNT + 4, &db->buf_pool_dma_ptr); @@ -426,6 +428,7 @@ static int __devinit dmfe_init_one (struct pci_dev *pdev, dev->poll_controller = &poll_dmfe; #endif dev->ethtool_ops = &netdev_ethtool_ops; + netif_carrier_off(db->dev); spin_lock_init(&db->lock); pci_read_config_dword(pdev, 0x50, &pci_pmr); @@ -1050,6 +1053,7 @@ static void netdev_get_drvinfo(struct net_device *dev, static const struct ethtool_ops netdev_ethtool_ops = { .get_drvinfo = netdev_get_drvinfo, + .get_link = ethtool_op_get_link, }; /* @@ -1144,6 +1148,7 @@ static void dmfe_timer(unsigned long data) /* Link Failed */ DMFE_DBUG(0, "Link Failed", tmp_cr12); db->link_failed = 1; + netif_carrier_off(db->dev); /* For Force 10/100M Half/Full mode: Enable Auto-Nego mode */ /* AUTO or force 1M Homerun/Longrun don't need */ @@ -1166,6 +1171,8 @@ static void dmfe_timer(unsigned long data) if ( (db->media_mode & DMFE_AUTO) && dmfe_sense_speed(db) ) db->link_failed = 1; + else + netif_carrier_on(db->dev); dmfe_process_mode(db); /* SHOW_MEDIA_TYPE(db->op_mode); */ } diff --git a/drivers/net/typhoon.c b/drivers/net/typhoon.c index 3bf9e630404..8ddea1da7c0 100644 --- a/drivers/net/typhoon.c +++ b/drivers/net/typhoon.c @@ -127,7 +127,6 @@ static const int multicast_filter_limit = 32; #include <asm/io.h> #include <asm/uaccess.h> #include <linux/in6.h> -#include <asm/checksum.h> #include <linux/version.h> #include <linux/dma-mapping.h> diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c index b3788801106..1f05511fa39 100644 --- a/drivers/net/ucc_geth.c +++ b/drivers/net/ucc_geth.c @@ -30,7 +30,7 @@ #include <linux/ethtool.h> #include <linux/mii.h> -#include <asm/of_device.h> +#include <asm/of_platform.h> #include <asm/uaccess.h> #include <asm/irq.h> #include <asm/io.h> @@ -4301,12 +4301,12 @@ static int __init ucc_geth_init(void) memcpy(&(ugeth_info[i]), &ugeth_primary_info, sizeof(ugeth_primary_info)); - return of_register_driver(&ucc_geth_driver); + return of_register_platform_driver(&ucc_geth_driver); } static void __exit ucc_geth_exit(void) { - of_unregister_driver(&ucc_geth_driver); + of_unregister_platform_driver(&ucc_geth_driver); } module_init(ucc_geth_init); diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig index b5d0d7fb647..d5ab9cf1325 100644 --- a/drivers/net/wan/Kconfig +++ b/drivers/net/wan/Kconfig @@ -57,44 +57,6 @@ config COSA The driver will be compiled as a module: the module will be called cosa. -config DSCC4 - tristate "Etinc PCISYNC serial board support" - depends on WAN && PCI && m - help - Driver for Etinc PCISYNC boards based on the Infineon (ex. Siemens) - DSCC4 chipset. - - This is supposed to work with the four port card. Take a look at - <http://www.cogenit.fr/dscc4/> for further information about the - driver. - - To compile this driver as a module, choose M here: the - module will be called dscc4. - -config DSCC4_PCISYNC - bool "Etinc PCISYNC features" - depends on DSCC4 - help - Due to Etinc's design choice for its PCISYNC cards, some operations - are only allowed on specific ports of the DSCC4. This option is the - only way for the driver to know that it shouldn't return a success - code for these operations. - - Please say Y if your card is an Etinc's PCISYNC. - -config DSCC4_PCI_RST - bool "Hard reset support" - depends on DSCC4 - help - Various DSCC4 bugs forbid any reliable software reset of the ASIC. - As a replacement, some vendors provide a way to assert the PCI #RST - pin of DSCC4 through the GPIO port of the card. If you choose Y, - the driver will make use of this feature before module removal - (i.e. rmmod). The feature is known to be available on Commtech's - cards. Contact your manufacturer for details. - - Say Y if your card supports this feature. - # # Lan Media's board. Currently 1000, 1200, 5200, 5245 # @@ -323,6 +285,44 @@ config FARSYNC To compile this driver as a module, choose M here: the module will be called farsync. +config DSCC4 + tristate "Etinc PCISYNC serial board support" + depends on HDLC && PCI && m + help + Driver for Etinc PCISYNC boards based on the Infineon (ex. Siemens) + DSCC4 chipset. + + This is supposed to work with the four port card. Take a look at + <http://www.cogenit.fr/dscc4/> for further information about the + driver. + + To compile this driver as a module, choose M here: the + module will be called dscc4. + +config DSCC4_PCISYNC + bool "Etinc PCISYNC features" + depends on DSCC4 + help + Due to Etinc's design choice for its PCISYNC cards, some operations + are only allowed on specific ports of the DSCC4. This option is the + only way for the driver to know that it shouldn't return a success + code for these operations. + + Please say Y if your card is an Etinc's PCISYNC. + +config DSCC4_PCI_RST + bool "Hard reset support" + depends on DSCC4 + help + Various DSCC4 bugs forbid any reliable software reset of the ASIC. + As a replacement, some vendors provide a way to assert the PCI #RST + pin of DSCC4 through the GPIO port of the card. If you choose Y, + the driver will make use of this feature before module removal + (i.e. rmmod). The feature is known to be available on Commtech's + cards. Contact your manufacturer for details. + + Say Y if your card supports this feature. + config DLCI tristate "Frame Relay DLCI support" depends on WAN diff --git a/drivers/net/wireless/atmel.c b/drivers/net/wireless/atmel.c index 0c07b8b7250..10bcb48e80d 100644 --- a/drivers/net/wireless/atmel.c +++ b/drivers/net/wireless/atmel.c @@ -595,7 +595,7 @@ static void atmel_join_bss(struct atmel_private *priv, int bss_index); static void atmel_smooth_qual(struct atmel_private *priv); static void atmel_writeAR(struct net_device *dev, u16 data); static int probe_atmel_card(struct net_device *dev); -static int reset_atmel_card(struct net_device *dev ); +static int reset_atmel_card(struct net_device *dev); static void atmel_enter_state(struct atmel_private *priv, int new_state); int atmel_open (struct net_device *dev); @@ -784,11 +784,11 @@ static void tx_update_descriptor(struct atmel_private *priv, int is_bcast, static int start_tx(struct sk_buff *skb, struct net_device *dev) { + static const u8 SNAP_RFC1024[6] = { 0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00 }; struct atmel_private *priv = netdev_priv(dev); struct ieee80211_hdr_4addr header; unsigned long flags; u16 buff, frame_ctl, len = (ETH_ZLEN < skb->len) ? skb->len : ETH_ZLEN; - u8 SNAP_RFC1024[6] = {0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00}; if (priv->card && priv->present_callback && !(*priv->present_callback)(priv->card)) { @@ -1193,7 +1193,7 @@ static irqreturn_t service_interrupt(int irq, void *dev_id) atmel_set_gcr(dev, GCR_ACKINT); /* acknowledge interrupt */ - for (i = 0; i < sizeof(irq_order)/sizeof(u8); i++) + for (i = 0; i < ARRAY_SIZE(irq_order); i++) if (isr & irq_order[i]) break; @@ -1345,10 +1345,10 @@ int atmel_open(struct net_device *dev) atmel_set_mib8(priv, Phy_Mib_Type, PHY_MIB_REG_DOMAIN_POS, priv->reg_domain); } else { priv->reg_domain = atmel_get_mib8(priv, Phy_Mib_Type, PHY_MIB_REG_DOMAIN_POS); - for (i = 0; i < sizeof(channel_table)/sizeof(channel_table[0]); i++) + for (i = 0; i < ARRAY_SIZE(channel_table); i++) if (priv->reg_domain == channel_table[i].reg_domain) break; - if (i == sizeof(channel_table)/sizeof(channel_table[0])) { + if (i == ARRAY_SIZE(channel_table)) { priv->reg_domain = REG_DOMAIN_MKK1; printk(KERN_ALERT "%s: failed to get regulatory domain: assuming MKK1.\n", dev->name); } @@ -1393,7 +1393,7 @@ static int atmel_validate_channel(struct atmel_private *priv, int channel) else return suitable default channel */ int i; - for (i = 0; i < sizeof(channel_table)/sizeof(channel_table[0]); i++) + for (i = 0; i < ARRAY_SIZE(channel_table); i++) if (priv->reg_domain == channel_table[i].reg_domain) { if (channel >= channel_table[i].min && channel <= channel_table[i].max) @@ -1437,7 +1437,7 @@ static int atmel_proc_output (char *buf, struct atmel_private *priv) } r = "<unknown>"; - for (i = 0; i < sizeof(channel_table)/sizeof(channel_table[0]); i++) + for (i = 0; i < ARRAY_SIZE(channel_table); i++) if (priv->reg_domain == channel_table[i].reg_domain) r = channel_table[i].name; @@ -1736,7 +1736,7 @@ static int atmel_set_encode(struct net_device *dev, /* Disable the key */ priv->wep_key_len[index] = 0; /* Check if the key is not marked as invalid */ - if(!(dwrq->flags & IW_ENCODE_NOKEY)) { + if (!(dwrq->flags & IW_ENCODE_NOKEY)) { /* Cleanup */ memset(priv->wep_keys[index], 0, 13); /* Copy the key in the driver */ @@ -1907,7 +1907,7 @@ static int atmel_get_encodeext(struct net_device *dev, encoding->flags = idx + 1; memset(ext, 0, sizeof(*ext)); - + if (!priv->wep_is_on) { ext->alg = IW_ENCODE_ALG_NONE; ext->key_len = 0; @@ -2343,6 +2343,14 @@ static int atmel_get_scan(struct net_device *dev, iwe.u.freq.e = 0; current_ev = iwe_stream_add_event(current_ev, extra + IW_SCAN_MAX_DATA, &iwe, IW_EV_FREQ_LEN); + /* Add quality statistics */ + iwe.cmd = IWEVQUAL; + iwe.u.qual.level = priv->BSSinfo[i].RSSI; + iwe.u.qual.qual = iwe.u.qual.level; + /* iwe.u.qual.noise = SOMETHING */ + current_ev = iwe_stream_add_event(current_ev, extra + IW_SCAN_MAX_DATA , &iwe, IW_EV_QUAL_LEN); + + iwe.cmd = SIOCGIWENCODE; if (priv->BSSinfo[i].UsingWEP) iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY; @@ -2373,7 +2381,7 @@ static int atmel_get_range(struct net_device *dev, range->min_nwid = 0x0000; range->max_nwid = 0x0000; range->num_channels = 0; - for (j = 0; j < sizeof(channel_table)/sizeof(channel_table[0]); j++) + for (j = 0; j < ARRAY_SIZE(channel_table); j++) if (priv->reg_domain == channel_table[j].reg_domain) { range->num_channels = channel_table[j].max - channel_table[j].min + 1; break; @@ -2579,9 +2587,9 @@ static const struct iw_priv_args atmel_private_args[] = { static const struct iw_handler_def atmel_handler_def = { - .num_standard = sizeof(atmel_handler)/sizeof(iw_handler), - .num_private = sizeof(atmel_private_handler)/sizeof(iw_handler), - .num_private_args = sizeof(atmel_private_args)/sizeof(struct iw_priv_args), + .num_standard = ARRAY_SIZE(atmel_handler), + .num_private = ARRAY_SIZE(atmel_private_handler), + .num_private_args = ARRAY_SIZE(atmel_private_args), .standard = (iw_handler *) atmel_handler, .private = (iw_handler *) atmel_private_handler, .private_args = (struct iw_priv_args *) atmel_private_args, @@ -2645,7 +2653,7 @@ static int atmel_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) domain[REGDOMAINSZ] = 0; rc = -EINVAL; - for (i = 0; i < sizeof(channel_table)/sizeof(channel_table[0]); i++) { + for (i = 0; i < ARRAY_SIZE(channel_table); i++) { /* strcasecmp doesn't exist in the library */ char *a = channel_table[i].name; char *b = domain; diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c index 785664090bb..5c410989c4d 100644 --- a/drivers/net/wireless/atmel_cs.c +++ b/drivers/net/wireless/atmel_cs.c @@ -5,12 +5,12 @@ Copyright 2000-2001 ATMEL Corporation. Copyright 2003 Simon Kelley. - This code was developed from version 2.1.1 of the Atmel drivers, - released by Atmel corp. under the GPL in December 2002. It also - includes code from the Linux aironet drivers (C) Benjamin Reed, - and the Linux PCMCIA package, (C) David Hinds. + This code was developed from version 2.1.1 of the Atmel drivers, + released by Atmel corp. under the GPL in December 2002. It also + includes code from the Linux aironet drivers (C) Benjamin Reed, + and the Linux PCMCIA package, (C) David Hinds. - For all queries about this code, please contact the current author, + For all queries about this code, please contact the current author, Simon Kelley <simon@thekelleys.org.uk> and not Atmel Corporation. This program is free software; you can redistribute it and/or modify @@ -87,7 +87,7 @@ MODULE_SUPPORTED_DEVICE("Atmel at76c50x PCMCIA cards"); event is received. The config() and release() entry points are used to configure or release a socket, in response to card insertion and ejection events. They are invoked from the atmel_cs - event handler. + event handler. */ static int atmel_config(struct pcmcia_device *link); @@ -133,22 +133,22 @@ static void atmel_detach(struct pcmcia_device *p_dev); device IO routines can use a flag like this to throttle IO to a card that is not ready to accept it. */ - + typedef struct local_info_t { dev_node_t node; struct net_device *eth_dev; } local_info_t; /*====================================================================== - + atmel_attach() creates an "instance" of the driver, allocating local data structures for one device. The device is registered with Card Services. - + The dev_link structure is initialized, but we don't actually configure the card at this point -- we wait until we receive a card insertion event. - + ======================================================================*/ static int atmel_probe(struct pcmcia_device *p_dev) @@ -184,12 +184,12 @@ static int atmel_probe(struct pcmcia_device *p_dev) } /* atmel_attach */ /*====================================================================== - + This deletes a driver "instance". The device is de-registered with Card Services. If it has been released, all local data structures are freed. Otherwise, the structures will be freed when the device is released. - + ======================================================================*/ static void atmel_detach(struct pcmcia_device *link) @@ -202,11 +202,11 @@ static void atmel_detach(struct pcmcia_device *link) } /*====================================================================== - + atmel_config() is scheduled to run after a CARD_INSERTION event is received, to configure the PCMCIA socket, and to make the device available to the system. - + ======================================================================*/ #define CS_CHECK(fn, ret) \ @@ -237,12 +237,12 @@ static int atmel_config(struct pcmcia_device *link) did = handle_to_dev(link).driver_data; DEBUG(0, "atmel_config(0x%p)\n", link); - + tuple.Attributes = 0; tuple.TupleData = buf; tuple.TupleDataMax = sizeof(buf); tuple.TupleOffset = 0; - + /* This reads the card's CONFIG tuple to find its configuration registers. @@ -258,7 +258,7 @@ static int atmel_config(struct pcmcia_device *link) In this loop, we scan the CIS for configuration table entries, each of which describes a valid card configuration, including voltage, IO window, memory window, and interrupt settings. - + We make no assumptions about the card to be configured: we use just the information available in the CIS. In an ideal world, this would work for any PCMCIA card, but it requires a complete @@ -274,17 +274,17 @@ static int atmel_config(struct pcmcia_device *link) if (pcmcia_get_tuple_data(link, &tuple) != 0 || pcmcia_parse_tuple(link, &tuple, &parse) != 0) goto next_entry; - + if (cfg->flags & CISTPL_CFTABLE_DEFAULT) dflt = *cfg; if (cfg->index == 0) goto next_entry; link->conf.ConfigIndex = cfg->index; - + /* Does this card need audio output? */ if (cfg->flags & CISTPL_CFTABLE_AUDIO) { link->conf.Attributes |= CONF_ENABLE_SPKR; link->conf.Status = CCSR_AUDIO_ENA; } - + /* Use power settings for Vcc and Vpp if present */ /* Note that the CIS values need to be rescaled */ if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM)) @@ -293,11 +293,11 @@ static int atmel_config(struct pcmcia_device *link) else if (dflt.vpp1.present & (1<<CISTPL_POWER_VNOM)) link->conf.Vpp = dflt.vpp1.param[CISTPL_POWER_VNOM]/10000; - + /* Do we need to allocate an interrupt? */ if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1) link->conf.Attributes |= CONF_ENABLE_IRQ; - + /* IO window settings */ link->io.NumPorts1 = link->io.NumPorts2 = 0; if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) { @@ -315,18 +315,18 @@ static int atmel_config(struct pcmcia_device *link) link->io.NumPorts2 = io->win[1].len; } } - + /* This reserves IO space but doesn't actually enable it */ if (pcmcia_request_io(link, &link->io) != 0) goto next_entry; /* If we got this far, we're cool! */ break; - + next_entry: CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(link, &tuple)); } - + /* Allocate an interrupt line. Note that this does not assign a handler to the interrupt, unless the 'Handler' member of the @@ -334,31 +334,31 @@ static int atmel_config(struct pcmcia_device *link) */ if (link->conf.Attributes & CONF_ENABLE_IRQ) CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq)); - + /* This actually configures the PCMCIA socket -- setting up the I/O windows and the interrupt mapping, and putting the card and host interface into "Memory and IO" mode. */ CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf)); - + if (link->irq.AssignedIRQ == 0) { - printk(KERN_ALERT + printk(KERN_ALERT "atmel: cannot assign IRQ: check that CONFIG_ISA is set in kernel config."); goto cs_failed; } - - ((local_info_t*)link->priv)->eth_dev = + + ((local_info_t*)link->priv)->eth_dev = init_atmel_card(link->irq.AssignedIRQ, link->io.BasePort1, did ? did->driver_info : ATMEL_FW_TYPE_NONE, &handle_to_dev(link), - card_present, + card_present, link); - if (!((local_info_t*)link->priv)->eth_dev) + if (!((local_info_t*)link->priv)->eth_dev) goto cs_failed; - - + + /* At this point, the dev_node_t structure(s) need to be initialized and arranged in a linked list at link->dev_node. @@ -376,11 +376,11 @@ static int atmel_config(struct pcmcia_device *link) } /*====================================================================== - + After a card is removed, atmel_release() will unregister the device, and release the PCMCIA configuration. If the device is still open, this will be postponed until it is closed. - + ======================================================================*/ static void atmel_release(struct pcmcia_device *link) @@ -517,7 +517,7 @@ static void atmel_cs_cleanup(void) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - POSSIBILITY OF SUCH DAMAGE. + POSSIBILITY OF SUCH DAMAGE. */ module_init(atmel_cs_init); diff --git a/drivers/net/wireless/atmel_pci.c b/drivers/net/wireless/atmel_pci.c index 3bfa791c323..92f87fbe750 100644 --- a/drivers/net/wireless/atmel_pci.c +++ b/drivers/net/wireless/atmel_pci.c @@ -53,18 +53,18 @@ static int __devinit atmel_pci_probe(struct pci_dev *pdev, const struct pci_device_id *pent) { struct net_device *dev; - + if (pci_enable_device(pdev)) return -ENODEV; - + pci_set_master(pdev); - - dev = init_atmel_card(pdev->irq, pdev->resource[1].start, + + dev = init_atmel_card(pdev->irq, pdev->resource[1].start, ATMEL_FW_TYPE_506, &pdev->dev, NULL, NULL); if (!dev) return -ENODEV; - + pci_set_drvdata(pdev, dev); return 0; } diff --git a/drivers/net/wireless/bcm43xx/bcm43xx.h b/drivers/net/wireless/bcm43xx/bcm43xx.h index fbc0c087f53..8286678513b 100644 --- a/drivers/net/wireless/bcm43xx/bcm43xx.h +++ b/drivers/net/wireless/bcm43xx/bcm43xx.h @@ -159,6 +159,7 @@ /* Chipcommon registers. */ #define BCM43xx_CHIPCOMMON_CAPABILITIES 0x04 +#define BCM43xx_CHIPCOMMON_CTL 0x28 #define BCM43xx_CHIPCOMMON_PLLONDELAY 0xB0 #define BCM43xx_CHIPCOMMON_FREFSELDELAY 0xB4 #define BCM43xx_CHIPCOMMON_SLOWCLKCTL 0xB8 @@ -172,6 +173,33 @@ /* SBTOPCI2 values. */ #define BCM43xx_SBTOPCI2_PREFETCH 0x4 #define BCM43xx_SBTOPCI2_BURST 0x8 +#define BCM43xx_SBTOPCI2_MEMREAD_MULTI 0x20 + +/* PCI-E core registers. */ +#define BCM43xx_PCIECORE_REG_ADDR 0x0130 +#define BCM43xx_PCIECORE_REG_DATA 0x0134 +#define BCM43xx_PCIECORE_MDIO_CTL 0x0128 +#define BCM43xx_PCIECORE_MDIO_DATA 0x012C + +/* PCI-E registers. */ +#define BCM43xx_PCIE_TLP_WORKAROUND 0x0004 +#define BCM43xx_PCIE_DLLP_LINKCTL 0x0100 + +/* PCI-E MDIO bits. */ +#define BCM43xx_PCIE_MDIO_ST 0x40000000 +#define BCM43xx_PCIE_MDIO_WT 0x10000000 +#define BCM43xx_PCIE_MDIO_DEV 22 +#define BCM43xx_PCIE_MDIO_REG 18 +#define BCM43xx_PCIE_MDIO_TA 0x00020000 +#define BCM43xx_PCIE_MDIO_TC 0x0100 + +/* MDIO devices. */ +#define BCM43xx_MDIO_SERDES_RX 0x1F + +/* SERDES RX registers. */ +#define BCM43xx_SERDES_RXTIMER 0x2 +#define BCM43xx_SERDES_CDR 0x6 +#define BCM43xx_SERDES_CDR_BW 0x7 /* Chipcommon capabilities. */ #define BCM43xx_CAPABILITIES_PCTL 0x00040000 @@ -221,6 +249,7 @@ #define BCM43xx_COREID_USB20_HOST 0x819 #define BCM43xx_COREID_USB20_DEV 0x81a #define BCM43xx_COREID_SDIO_HOST 0x81b +#define BCM43xx_COREID_PCIE 0x820 /* Core Information Registers */ #define BCM43xx_CIR_BASE 0xf00 @@ -365,6 +394,9 @@ #define BCM43xx_DEFAULT_SHORT_RETRY_LIMIT 7 #define BCM43xx_DEFAULT_LONG_RETRY_LIMIT 4 +/* FIXME: the next line is a guess as to what the maximum RSSI value might be */ +#define RX_RSSI_MAX 60 + /* Max size of a security key */ #define BCM43xx_SEC_KEYSIZE 16 /* Security algorithms. */ diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_main.c b/drivers/net/wireless/bcm43xx/bcm43xx_main.c index 728a9b789fd..2ec2e5afce6 100644 --- a/drivers/net/wireless/bcm43xx/bcm43xx_main.c +++ b/drivers/net/wireless/bcm43xx/bcm43xx_main.c @@ -130,6 +130,10 @@ MODULE_PARM_DESC(fwpostfix, "Postfix for .fw files. Useful for debugging."); { PCI_VENDOR_ID_BROADCOM, 0x4301, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* Broadcom 4307 802.11b */ { PCI_VENDOR_ID_BROADCOM, 0x4307, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + /* Broadcom 4311 802.11(a)/b/g */ + { PCI_VENDOR_ID_BROADCOM, 0x4311, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + /* Broadcom 4312 802.11a/b/g */ + { PCI_VENDOR_ID_BROADCOM, 0x4312, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* Broadcom 4318 802.11b/g */ { PCI_VENDOR_ID_BROADCOM, 0x4318, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* Broadcom 4319 802.11a/b/g */ @@ -2600,8 +2604,9 @@ static int bcm43xx_probe_cores(struct bcm43xx_private *bcm) /* fetch sb_id_hi from core information registers */ sb_id_hi = bcm43xx_read32(bcm, BCM43xx_CIR_SB_ID_HI); - core_id = (sb_id_hi & 0xFFF0) >> 4; - core_rev = (sb_id_hi & 0xF); + core_id = (sb_id_hi & 0x8FF0) >> 4; + core_rev = (sb_id_hi & 0x7000) >> 8; + core_rev |= (sb_id_hi & 0xF); core_vendor = (sb_id_hi & 0xFFFF0000) >> 16; /* if present, chipcommon is always core 0; read the chipid from it */ @@ -2679,14 +2684,10 @@ static int bcm43xx_probe_cores(struct bcm43xx_private *bcm) bcm->chip_id, bcm->chip_rev); dprintk(KERN_INFO PFX "Number of cores: %d\n", core_count); if (bcm->core_chipcommon.available) { - dprintk(KERN_INFO PFX "Core 0: ID 0x%x, rev 0x%x, vendor 0x%x, %s\n", - core_id, core_rev, core_vendor, - bcm43xx_core_enabled(bcm) ? "enabled" : "disabled"); - } - - if (bcm->core_chipcommon.available) + dprintk(KERN_INFO PFX "Core 0: ID 0x%x, rev 0x%x, vendor 0x%x\n", + core_id, core_rev, core_vendor); current_core = 1; - else + } else current_core = 0; for ( ; current_core < core_count; current_core++) { struct bcm43xx_coreinfo *core; @@ -2704,13 +2705,13 @@ static int bcm43xx_probe_cores(struct bcm43xx_private *bcm) core_rev = (sb_id_hi & 0xF); core_vendor = (sb_id_hi & 0xFFFF0000) >> 16; - dprintk(KERN_INFO PFX "Core %d: ID 0x%x, rev 0x%x, vendor 0x%x, %s\n", - current_core, core_id, core_rev, core_vendor, - bcm43xx_core_enabled(bcm) ? "enabled" : "disabled" ); + dprintk(KERN_INFO PFX "Core %d: ID 0x%x, rev 0x%x, vendor 0x%x\n", + current_core, core_id, core_rev, core_vendor); core = NULL; switch (core_id) { case BCM43xx_COREID_PCI: + case BCM43xx_COREID_PCIE: core = &bcm->core_pci; if (core->available) { printk(KERN_WARNING PFX "Multiple PCI cores found.\n"); @@ -2749,12 +2750,12 @@ static int bcm43xx_probe_cores(struct bcm43xx_private *bcm) case 6: case 7: case 9: + case 10: break; default: - printk(KERN_ERR PFX "Error: Unsupported 80211 core revision %u\n", + printk(KERN_WARNING PFX + "Unsupported 80211 core revision %u\n", core_rev); - err = -ENODEV; - goto out; } bcm->nr_80211_available++; core->priv = ext_80211; @@ -2868,16 +2869,11 @@ static int bcm43xx_wireless_core_init(struct bcm43xx_private *bcm, u32 sbimconfiglow; u8 limit; - if (bcm->chip_rev < 5) { + if (bcm->core_pci.rev <= 5 && bcm->core_pci.id != BCM43xx_COREID_PCIE) { sbimconfiglow = bcm43xx_read32(bcm, BCM43xx_CIR_SBIMCONFIGLOW); sbimconfiglow &= ~ BCM43xx_SBIMCONFIGLOW_REQUEST_TOUT_MASK; sbimconfiglow &= ~ BCM43xx_SBIMCONFIGLOW_SERVICE_TOUT_MASK; - if (bcm->bustype == BCM43xx_BUSTYPE_PCI) - sbimconfiglow |= 0x32; - else if (bcm->bustype == BCM43xx_BUSTYPE_SB) - sbimconfiglow |= 0x53; - else - assert(0); + sbimconfiglow |= 0x32; bcm43xx_write32(bcm, BCM43xx_CIR_SBIMCONFIGLOW, sbimconfiglow); } @@ -3004,22 +3000,64 @@ static void bcm43xx_pcicore_broadcast_value(struct bcm43xx_private *bcm, static int bcm43xx_pcicore_commit_settings(struct bcm43xx_private *bcm) { - int err; - struct bcm43xx_coreinfo *old_core; + int err = 0; - old_core = bcm->current_core; - err = bcm43xx_switch_core(bcm, &bcm->core_pci); - if (err) - goto out; + bcm->irq_savedstate = bcm43xx_interrupt_disable(bcm, BCM43xx_IRQ_ALL); - bcm43xx_pcicore_broadcast_value(bcm, 0xfd8, 0x00000000); + if (bcm->core_chipcommon.available) { + err = bcm43xx_switch_core(bcm, &bcm->core_chipcommon); + if (err) + goto out; + + bcm43xx_pcicore_broadcast_value(bcm, 0xfd8, 0x00000000); + + /* this function is always called when a PCI core is mapped */ + err = bcm43xx_switch_core(bcm, &bcm->core_pci); + if (err) + goto out; + } else + bcm43xx_pcicore_broadcast_value(bcm, 0xfd8, 0x00000000); + + bcm43xx_interrupt_enable(bcm, bcm->irq_savedstate); - bcm43xx_switch_core(bcm, old_core); - assert(err == 0); out: return err; } +static u32 bcm43xx_pcie_reg_read(struct bcm43xx_private *bcm, u32 address) +{ + bcm43xx_write32(bcm, BCM43xx_PCIECORE_REG_ADDR, address); + return bcm43xx_read32(bcm, BCM43xx_PCIECORE_REG_DATA); +} + +static void bcm43xx_pcie_reg_write(struct bcm43xx_private *bcm, u32 address, + u32 data) +{ + bcm43xx_write32(bcm, BCM43xx_PCIECORE_REG_ADDR, address); + bcm43xx_write32(bcm, BCM43xx_PCIECORE_REG_DATA, data); +} + +static void bcm43xx_pcie_mdio_write(struct bcm43xx_private *bcm, u8 dev, u8 reg, + u16 data) +{ + int i; + + bcm43xx_write32(bcm, BCM43xx_PCIECORE_MDIO_CTL, 0x0082); + bcm43xx_write32(bcm, BCM43xx_PCIECORE_MDIO_DATA, BCM43xx_PCIE_MDIO_ST | + BCM43xx_PCIE_MDIO_WT | (dev << BCM43xx_PCIE_MDIO_DEV) | + (reg << BCM43xx_PCIE_MDIO_REG) | BCM43xx_PCIE_MDIO_TA | + data); + udelay(10); + + for (i = 0; i < 10; i++) { + if (bcm43xx_read32(bcm, BCM43xx_PCIECORE_MDIO_CTL) & + BCM43xx_PCIE_MDIO_TC) + break; + msleep(1); + } + bcm43xx_write32(bcm, BCM43xx_PCIECORE_MDIO_CTL, 0); +} + /* Make an I/O Core usable. "core_mask" is the bitmask of the cores to enable. * To enable core 0, pass a core_mask of 1<<0 */ @@ -3039,7 +3077,8 @@ static int bcm43xx_setup_backplane_pci_connection(struct bcm43xx_private *bcm, if (err) goto out; - if (bcm->core_pci.rev < 6) { + if (bcm->current_core->rev < 6 || + bcm->current_core->id == BCM43xx_COREID_PCI) { value = bcm43xx_read32(bcm, BCM43xx_CIR_SBINTVEC); value |= (1 << backplane_flag_nr); bcm43xx_write32(bcm, BCM43xx_CIR_SBINTVEC, value); @@ -3057,21 +3096,46 @@ static int bcm43xx_setup_backplane_pci_connection(struct bcm43xx_private *bcm, } } - value = bcm43xx_read32(bcm, BCM43xx_PCICORE_SBTOPCI2); - value |= BCM43xx_SBTOPCI2_PREFETCH | BCM43xx_SBTOPCI2_BURST; - bcm43xx_write32(bcm, BCM43xx_PCICORE_SBTOPCI2, value); - - if (bcm->core_pci.rev < 5) { - value = bcm43xx_read32(bcm, BCM43xx_CIR_SBIMCONFIGLOW); - value |= (2 << BCM43xx_SBIMCONFIGLOW_SERVICE_TOUT_SHIFT) - & BCM43xx_SBIMCONFIGLOW_SERVICE_TOUT_MASK; - value |= (3 << BCM43xx_SBIMCONFIGLOW_REQUEST_TOUT_SHIFT) - & BCM43xx_SBIMCONFIGLOW_REQUEST_TOUT_MASK; - bcm43xx_write32(bcm, BCM43xx_CIR_SBIMCONFIGLOW, value); - err = bcm43xx_pcicore_commit_settings(bcm); - assert(err == 0); + if (bcm->current_core->id == BCM43xx_COREID_PCI) { + value = bcm43xx_read32(bcm, BCM43xx_PCICORE_SBTOPCI2); + value |= BCM43xx_SBTOPCI2_PREFETCH | BCM43xx_SBTOPCI2_BURST; + bcm43xx_write32(bcm, BCM43xx_PCICORE_SBTOPCI2, value); + + if (bcm->current_core->rev < 5) { + value = bcm43xx_read32(bcm, BCM43xx_CIR_SBIMCONFIGLOW); + value |= (2 << BCM43xx_SBIMCONFIGLOW_SERVICE_TOUT_SHIFT) + & BCM43xx_SBIMCONFIGLOW_SERVICE_TOUT_MASK; + value |= (3 << BCM43xx_SBIMCONFIGLOW_REQUEST_TOUT_SHIFT) + & BCM43xx_SBIMCONFIGLOW_REQUEST_TOUT_MASK; + bcm43xx_write32(bcm, BCM43xx_CIR_SBIMCONFIGLOW, value); + err = bcm43xx_pcicore_commit_settings(bcm); + assert(err == 0); + } else if (bcm->current_core->rev >= 11) { + value = bcm43xx_read32(bcm, BCM43xx_PCICORE_SBTOPCI2); + value |= BCM43xx_SBTOPCI2_MEMREAD_MULTI; + bcm43xx_write32(bcm, BCM43xx_PCICORE_SBTOPCI2, value); + } + } else { + if (bcm->current_core->rev == 0 || bcm->current_core->rev == 1) { + value = bcm43xx_pcie_reg_read(bcm, BCM43xx_PCIE_TLP_WORKAROUND); + value |= 0x8; + bcm43xx_pcie_reg_write(bcm, BCM43xx_PCIE_TLP_WORKAROUND, + value); + } + if (bcm->current_core->rev == 0) { + bcm43xx_pcie_mdio_write(bcm, BCM43xx_MDIO_SERDES_RX, + BCM43xx_SERDES_RXTIMER, 0x8128); + bcm43xx_pcie_mdio_write(bcm, BCM43xx_MDIO_SERDES_RX, + BCM43xx_SERDES_CDR, 0x0100); + bcm43xx_pcie_mdio_write(bcm, BCM43xx_MDIO_SERDES_RX, + BCM43xx_SERDES_CDR_BW, 0x1466); + } else if (bcm->current_core->rev == 1) { + value = bcm43xx_pcie_reg_read(bcm, BCM43xx_PCIE_DLLP_LINKCTL); + value |= 0x40; + bcm43xx_pcie_reg_write(bcm, BCM43xx_PCIE_DLLP_LINKCTL, + value); + } } - out_switch_back: err = bcm43xx_switch_core(bcm, old_core); out: @@ -3140,43 +3204,17 @@ static void bcm43xx_periodic_every15sec(struct bcm43xx_private *bcm) static void do_periodic_work(struct bcm43xx_private *bcm) { - unsigned int state; - - state = bcm->periodic_state; - if (state % 8 == 0) + if (bcm->periodic_state % 8 == 0) bcm43xx_periodic_every120sec(bcm); - if (state % 4 == 0) + if (bcm->periodic_state % 4 == 0) bcm43xx_periodic_every60sec(bcm); - if (state % 2 == 0) + if (bcm->periodic_state % 2 == 0) bcm43xx_periodic_every30sec(bcm); - if (state % 1 == 0) - bcm43xx_periodic_every15sec(bcm); - bcm->periodic_state = state + 1; + bcm43xx_periodic_every15sec(bcm); schedule_delayed_work(&bcm->periodic_work, HZ * 15); } -/* Estimate a "Badness" value based on the periodic work - * state-machine state. "Badness" is worse (bigger), if the - * periodic work will take longer. - */ -static int estimate_periodic_work_badness(unsigned int state) -{ - int badness = 0; - - if (state % 8 == 0) /* every 120 sec */ - badness += 10; - if (state % 4 == 0) /* every 60 sec */ - badness += 5; - if (state % 2 == 0) /* every 30 sec */ - badness += 1; - if (state % 1 == 0) /* every 15 sec */ - badness += 1; - -#define BADNESS_LIMIT 4 - return badness; -} - static void bcm43xx_periodic_work_handler(struct work_struct *work) { struct bcm43xx_private *bcm = @@ -3184,12 +3222,10 @@ static void bcm43xx_periodic_work_handler(struct work_struct *work) struct net_device *net_dev = bcm->net_dev; unsigned long flags; u32 savedirqs = 0; - int badness; unsigned long orig_trans_start = 0; mutex_lock(&bcm->mutex); - badness = estimate_periodic_work_badness(bcm->periodic_state); - if (badness > BADNESS_LIMIT) { + if (unlikely(bcm->periodic_state % 4 == 0)) { /* Periodic work will take a long time, so we want it to * be preemtible. */ @@ -3221,7 +3257,7 @@ static void bcm43xx_periodic_work_handler(struct work_struct *work) do_periodic_work(bcm); - if (badness > BADNESS_LIMIT) { + if (unlikely(bcm->periodic_state % 4 == 0)) { spin_lock_irqsave(&bcm->irq_lock, flags); tasklet_enable(&bcm->isr_tasklet); bcm43xx_interrupt_enable(bcm, savedirqs); @@ -3232,6 +3268,7 @@ static void bcm43xx_periodic_work_handler(struct work_struct *work) net_dev->trans_start = orig_trans_start; } mmiowb(); + bcm->periodic_state++; spin_unlock_irqrestore(&bcm->irq_lock, flags); mutex_unlock(&bcm->mutex); } @@ -3677,7 +3714,7 @@ static int bcm43xx_read_phyinfo(struct bcm43xx_private *bcm) bcm->ieee->freq_band = IEEE80211_24GHZ_BAND; break; case BCM43xx_PHYTYPE_G: - if (phy_rev > 7) + if (phy_rev > 8) phy_rev_ok = 0; bcm->ieee->modulation = IEEE80211_OFDM_MODULATION | IEEE80211_CCK_MODULATION; @@ -3689,6 +3726,8 @@ static int bcm43xx_read_phyinfo(struct bcm43xx_private *bcm) phy_type); return -ENODEV; }; + bcm->ieee->perfect_rssi = RX_RSSI_MAX; + bcm->ieee->worst_rssi = 0; if (!phy_rev_ok) { printk(KERN_WARNING PFX "Invalid PHY Revision %x\n", phy_rev); @@ -3975,11 +4014,6 @@ static int bcm43xx_ieee80211_hard_start_xmit(struct ieee80211_txb *txb, return NETDEV_TX_OK; } -static struct net_device_stats * bcm43xx_net_get_stats(struct net_device *net_dev) -{ - return &(bcm43xx_priv(net_dev)->ieee->stats); -} - static void bcm43xx_net_tx_timeout(struct net_device *net_dev) { struct bcm43xx_private *bcm = bcm43xx_priv(net_dev); @@ -4093,7 +4127,6 @@ static int __devinit bcm43xx_init_one(struct pci_dev *pdev, net_dev->open = bcm43xx_net_open; net_dev->stop = bcm43xx_net_stop; - net_dev->get_stats = bcm43xx_net_get_stats; net_dev->tx_timeout = bcm43xx_net_tx_timeout; #ifdef CONFIG_NET_POLL_CONTROLLER net_dev->poll_controller = bcm43xx_net_poll_controller; diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_power.c b/drivers/net/wireless/bcm43xx/bcm43xx_power.c index 6569da3a7a3..7e774f41095 100644 --- a/drivers/net/wireless/bcm43xx/bcm43xx_power.c +++ b/drivers/net/wireless/bcm43xx/bcm43xx_power.c @@ -153,8 +153,6 @@ int bcm43xx_pctl_init(struct bcm43xx_private *bcm) int err, maxfreq; struct bcm43xx_coreinfo *old_core; - if (!(bcm->chipcommon_capabilities & BCM43xx_CAPABILITIES_PCTL)) - return 0; old_core = bcm->current_core; err = bcm43xx_switch_core(bcm, &bcm->core_chipcommon); if (err == -ENODEV) @@ -162,11 +160,27 @@ int bcm43xx_pctl_init(struct bcm43xx_private *bcm) if (err) goto out; - maxfreq = bcm43xx_pctl_clockfreqlimit(bcm, 1); - bcm43xx_write32(bcm, BCM43xx_CHIPCOMMON_PLLONDELAY, - (maxfreq * 150 + 999999) / 1000000); - bcm43xx_write32(bcm, BCM43xx_CHIPCOMMON_FREFSELDELAY, - (maxfreq * 15 + 999999) / 1000000); + if (bcm->chip_id == 0x4321) { + if (bcm->chip_rev == 0) + bcm43xx_write32(bcm, BCM43xx_CHIPCOMMON_CTL, 0x03A4); + if (bcm->chip_rev == 1) + bcm43xx_write32(bcm, BCM43xx_CHIPCOMMON_CTL, 0x00A4); + } + + if (bcm->chipcommon_capabilities & BCM43xx_CAPABILITIES_PCTL) { + if (bcm->current_core->rev >= 10) { + /* Set Idle Power clock rate to 1Mhz */ + bcm43xx_write32(bcm, BCM43xx_CHIPCOMMON_SYSCLKCTL, + (bcm43xx_read32(bcm, BCM43xx_CHIPCOMMON_SYSCLKCTL) + & 0x0000FFFF) | 0x40000); + } else { + maxfreq = bcm43xx_pctl_clockfreqlimit(bcm, 1); + bcm43xx_write32(bcm, BCM43xx_CHIPCOMMON_PLLONDELAY, + (maxfreq * 150 + 999999) / 1000000); + bcm43xx_write32(bcm, BCM43xx_CHIPCOMMON_FREFSELDELAY, + (maxfreq * 15 + 999999) / 1000000); + } + } err = bcm43xx_switch_core(bcm, old_core); assert(err == 0); diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_wx.c b/drivers/net/wireless/bcm43xx/bcm43xx_wx.c index d27016f8c73..a659442b9c1 100644 --- a/drivers/net/wireless/bcm43xx/bcm43xx_wx.c +++ b/drivers/net/wireless/bcm43xx/bcm43xx_wx.c @@ -47,9 +47,6 @@ #define BCM43xx_WX_VERSION 18 #define MAX_WX_STRING 80 -/* FIXME: the next line is a guess as to what the maximum RSSI value might be */ -#define RX_RSSI_MAX 60 - static int bcm43xx_wx_get_name(struct net_device *net_dev, struct iw_request_info *info, @@ -693,6 +690,7 @@ static int bcm43xx_wx_set_swencryption(struct net_device *net_dev, bcm->ieee->host_encrypt = !!on; bcm->ieee->host_decrypt = !!on; bcm->ieee->host_build_iv = !on; + bcm->ieee->host_strip_iv_icv = !on; spin_unlock_irqrestore(&bcm->irq_lock, flags); mutex_unlock(&bcm->mutex); diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_xmit.c b/drivers/net/wireless/bcm43xx/bcm43xx_xmit.c index 0159e4e9320..3e246267169 100644 --- a/drivers/net/wireless/bcm43xx/bcm43xx_xmit.c +++ b/drivers/net/wireless/bcm43xx/bcm43xx_xmit.c @@ -544,24 +544,6 @@ int bcm43xx_rx(struct bcm43xx_private *bcm, } frame_ctl = le16_to_cpu(wlhdr->frame_ctl); - if ((frame_ctl & IEEE80211_FCTL_PROTECTED) && !bcm->ieee->host_decrypt) { - frame_ctl &= ~IEEE80211_FCTL_PROTECTED; - wlhdr->frame_ctl = cpu_to_le16(frame_ctl); - /* trim IV and ICV */ - /* FIXME: this must be done only for WEP encrypted packets */ - if (skb->len < 32) { - dprintkl(KERN_ERR PFX "RX packet dropped (PROTECTED flag " - "set and length < 32)\n"); - return -EINVAL; - } else { - memmove(skb->data + 4, skb->data, 24); - skb_pull(skb, 4); - skb_trim(skb, skb->len - 4); - stats.len -= 8; - } - wlhdr = (struct ieee80211_hdr_4addr *)(skb->data); - } - switch (WLAN_FC_GET_TYPE(frame_ctl)) { case IEEE80211_FTYPE_MGMT: ieee80211_rx_mgt(bcm->ieee, wlhdr, &stats); diff --git a/drivers/net/wireless/hostap/hostap_pci.c b/drivers/net/wireless/hostap/hostap_pci.c index c2fa011be29..d1de9766c83 100644 --- a/drivers/net/wireless/hostap/hostap_pci.c +++ b/drivers/net/wireless/hostap/hostap_pci.c @@ -425,8 +425,14 @@ static int prism2_pci_suspend(struct pci_dev *pdev, pm_message_t state) static int prism2_pci_resume(struct pci_dev *pdev) { struct net_device *dev = pci_get_drvdata(pdev); + int err; - pci_enable_device(pdev); + err = pci_enable_device(pdev); + if (err) { + printk(KERN_ERR "%s: pci_enable_device failed on resume\n", + dev->name); + return err; + } pci_restore_state(pdev); prism2_hw_config(dev, 0); if (netif_running(dev)) { diff --git a/drivers/net/wireless/ipw2100.c b/drivers/net/wireless/ipw2100.c index 0f554373a60..1bcd352a813 100644 --- a/drivers/net/wireless/ipw2100.c +++ b/drivers/net/wireless/ipw2100.c @@ -5833,19 +5833,6 @@ static void ipw2100_tx_timeout(struct net_device *dev) schedule_reset(priv); } -/* - * TODO: reimplement it so that it reads statistics - * from the adapter using ordinal tables - * instead of/in addition to collecting them - * in the driver - */ -static struct net_device_stats *ipw2100_stats(struct net_device *dev) -{ - struct ipw2100_priv *priv = ieee80211_priv(dev); - - return &priv->ieee->stats; -} - static int ipw2100_wpa_enable(struct ipw2100_priv *priv, int value) { /* This is called when wpa_supplicant loads and closes the driver @@ -6030,7 +6017,6 @@ static struct net_device *ipw2100_alloc_device(struct pci_dev *pci_dev, dev->open = ipw2100_open; dev->stop = ipw2100_close; dev->init = ipw2100_net_init; - dev->get_stats = ipw2100_stats; dev->ethtool_ops = &ipw2100_ethtool_ops; dev->tx_timeout = ipw2100_tx_timeout; dev->wireless_handlers = &ipw2100_wx_handler_def; @@ -6428,6 +6414,7 @@ static int ipw2100_resume(struct pci_dev *pci_dev) { struct ipw2100_priv *priv = pci_get_drvdata(pci_dev); struct net_device *dev = priv->net_dev; + int err; u32 val; if (IPW2100_PM_DISABLED) @@ -6438,7 +6425,12 @@ static int ipw2100_resume(struct pci_dev *pci_dev) IPW_DEBUG_INFO("%s: Coming out of suspend...\n", dev->name); pci_set_power_state(pci_dev, PCI_D0); - pci_enable_device(pci_dev); + err = pci_enable_device(pci_dev); + if (err) { + printk(KERN_ERR "%s: pci_enable_device failed on resume\n", + dev->name); + return err; + } pci_restore_state(pci_dev); /* @@ -7573,11 +7565,10 @@ static int ipw2100_wx_set_genie(struct net_device *dev, return -EINVAL; if (wrqu->data.length) { - buf = kmalloc(wrqu->data.length, GFP_KERNEL); + buf = kmemdup(extra, wrqu->data.length, GFP_KERNEL); if (buf == NULL) return -ENOMEM; - memcpy(buf, extra, wrqu->data.length); kfree(ieee->wpa_ie); ieee->wpa_ie = buf; ieee->wpa_ie_len = wrqu->data.length; diff --git a/drivers/net/wireless/ipw2200.c b/drivers/net/wireless/ipw2200.c index 587a0918fa5..e82e56bb85e 100644 --- a/drivers/net/wireless/ipw2200.c +++ b/drivers/net/wireless/ipw2200.c @@ -6938,8 +6938,8 @@ static int ipw_qos_association(struct ipw_priv *priv, } /* -* handling the beaconing responces. if we get different QoS setting -* of the network from the the associated setting adjust the QoS +* handling the beaconing responses. if we get different QoS setting +* off the network from the associated setting, adjust the QoS * setting */ static int ipw_qos_association_resp(struct ipw_priv *priv, @@ -11746,12 +11746,18 @@ static int ipw_pci_resume(struct pci_dev *pdev) { struct ipw_priv *priv = pci_get_drvdata(pdev); struct net_device *dev = priv->net_dev; + int err; u32 val; printk(KERN_INFO "%s: Coming out of suspend...\n", dev->name); pci_set_power_state(pdev, PCI_D0); - pci_enable_device(pdev); + err = pci_enable_device(pdev); + if (err) { + printk(KERN_ERR "%s: pci_enable_device failed on resume\n", + dev->name); + return err; + } pci_restore_state(pdev); /* diff --git a/drivers/net/wireless/orinoco_pci.h b/drivers/net/wireless/orinoco_pci.h index be1abea4b64..f4e5e06760c 100644 --- a/drivers/net/wireless/orinoco_pci.h +++ b/drivers/net/wireless/orinoco_pci.h @@ -60,7 +60,12 @@ static int orinoco_pci_resume(struct pci_dev *pdev) int err; pci_set_power_state(pdev, 0); - pci_enable_device(pdev); + err = pci_enable_device(pdev); + if (err) { + printk(KERN_ERR "%s: pci_enable_device failed on resume\n", + dev->name); + return err; + } pci_restore_state(pdev); err = request_irq(pdev->irq, orinoco_interrupt, IRQF_SHARED, diff --git a/drivers/net/wireless/prism54/isl_38xx.c b/drivers/net/wireless/prism54/isl_38xx.c index 23deee69974..02fc67bccbd 100644 --- a/drivers/net/wireless/prism54/isl_38xx.c +++ b/drivers/net/wireless/prism54/isl_38xx.c @@ -1,5 +1,4 @@ /* - * * Copyright (C) 2002 Intersil Americas Inc. * Copyright (C) 2003-2004 Luis R. Rodriguez <mcgrof@ruslug.rutgers.edu>_ * @@ -38,7 +37,7 @@ * isl38xx_disable_interrupts - disable all interrupts * @device: pci memory base address * - * Instructs the device to disable all interrupt reporting by asserting + * Instructs the device to disable all interrupt reporting by asserting * the IRQ line. New events may still show up in the interrupt identification * register located at offset %ISL38XX_INT_IDENT_REG. */ @@ -204,17 +203,19 @@ isl38xx_interface_reset(void __iomem *device_base, dma_addr_t host_address) /* enable the interrupt for detecting initialization */ /* Note: Do not enable other interrupts here. We want the - * device to have come up first 100% before allowing any other + * device to have come up first 100% before allowing any other * interrupts. */ isl38xx_w32_flush(device_base, ISL38XX_INT_IDENT_INIT, ISL38XX_INT_EN_REG); udelay(ISL38XX_WRITEIO_DELAY); /* allow complete full reset */ } void -isl38xx_enable_common_interrupts(void __iomem *device_base) { +isl38xx_enable_common_interrupts(void __iomem *device_base) +{ u32 reg; - reg = ( ISL38XX_INT_IDENT_UPDATE | - ISL38XX_INT_IDENT_SLEEP | ISL38XX_INT_IDENT_WAKEUP); + + reg = ISL38XX_INT_IDENT_UPDATE | ISL38XX_INT_IDENT_SLEEP | + ISL38XX_INT_IDENT_WAKEUP; isl38xx_w32_flush(device_base, reg, ISL38XX_INT_EN_REG); udelay(ISL38XX_WRITEIO_DELAY); } @@ -234,23 +235,21 @@ isl38xx_in_queue(isl38xx_control_block *cb, int queue) /* send queues */ case ISL38XX_CB_TX_MGMTQ: BUG_ON(delta > ISL38XX_CB_MGMT_QSIZE); + case ISL38XX_CB_TX_DATA_LQ: case ISL38XX_CB_TX_DATA_HQ: BUG_ON(delta > ISL38XX_CB_TX_QSIZE); return delta; - break; /* receive queues */ case ISL38XX_CB_RX_MGMTQ: BUG_ON(delta > ISL38XX_CB_MGMT_QSIZE); return ISL38XX_CB_MGMT_QSIZE - delta; - break; case ISL38XX_CB_RX_DATA_LQ: case ISL38XX_CB_RX_DATA_HQ: BUG_ON(delta > ISL38XX_CB_RX_QSIZE); return ISL38XX_CB_RX_QSIZE - delta; - break; } BUG(); return 0; diff --git a/drivers/net/wireless/prism54/isl_38xx.h b/drivers/net/wireless/prism54/isl_38xx.h index 8af20980af8..3fadcb6f529 100644 --- a/drivers/net/wireless/prism54/isl_38xx.h +++ b/drivers/net/wireless/prism54/isl_38xx.h @@ -1,5 +1,4 @@ /* - * * Copyright (C) 2002 Intersil Americas Inc. * * This program is free software; you can redistribute it and/or modify @@ -67,10 +66,10 @@ * @base: (host) memory base address of the device * @val: 32bit value (host order) to write * @offset: byte offset into @base to write value to - * + * * This helper takes care of writing a 32bit datum to the - * specified offset into the device's pci memory space, and making sure - * the pci memory buffers get flushed by performing one harmless read + * specified offset into the device's pci memory space, and making sure + * the pci memory buffers get flushed by performing one harmless read * from the %ISL38XX_PCI_POSTING_FLUSH offset. */ static inline void diff --git a/drivers/net/wireless/prism54/isl_ioctl.c b/drivers/net/wireless/prism54/isl_ioctl.c index e7700b4257e..a87eb51886c 100644 --- a/drivers/net/wireless/prism54/isl_ioctl.c +++ b/drivers/net/wireless/prism54/isl_ioctl.c @@ -1,5 +1,4 @@ /* - * * Copyright (C) 2002 Intersil Americas Inc. * (C) 2003,2004 Aurelien Alleaume <slts@free.fr> * (C) 2003 Herbert Valerio Riedel <hvr@gnu.org> @@ -55,12 +54,12 @@ static const unsigned char scan_rate_list[] = { 2, 4, 11, 22, * prism54_mib_mode_helper - MIB change mode helper function * @mib: the &struct islpci_mib object to modify * @iw_mode: new mode (%IW_MODE_*) - * + * * This is a helper function, hence it does not lock. Make sure - * caller deals with locking *if* necessary. This function sets the - * mode-dependent mib values and does the mapping of the Linux - * Wireless API modes to Device firmware modes. It also checks for - * correct valid Linux wireless modes. + * caller deals with locking *if* necessary. This function sets the + * mode-dependent mib values and does the mapping of the Linux + * Wireless API modes to Device firmware modes. It also checks for + * correct valid Linux wireless modes. */ static int prism54_mib_mode_helper(islpci_private *priv, u32 iw_mode) @@ -118,7 +117,7 @@ prism54_mib_mode_helper(islpci_private *priv, u32 iw_mode) * * this function initializes the struct given as @mib with defaults, * of which many are retrieved from the global module parameter - * variables. + * variables. */ void @@ -134,7 +133,7 @@ prism54_mib_init(islpci_private *priv) authen = CARD_DEFAULT_AUTHEN; wep = CARD_DEFAULT_WEP; filter = CARD_DEFAULT_FILTER; /* (0) Do not filter un-encrypted data */ - dot1x = CARD_DEFAULT_DOT1X; + dot1x = CARD_DEFAULT_DOT1X; mlme = CARD_DEFAULT_MLME_MODE; conformance = CARD_DEFAULT_CONFORMANCE; power = 127; @@ -229,7 +228,7 @@ prism54_get_wireless_stats(struct net_device *ndev) } else priv->iwstatistics.qual.updated = 0; - /* Update our wireless stats, but do not schedule to often + /* Update our wireless stats, but do not schedule to often * (max 1 HZ) */ if ((priv->stats_timestamp == 0) || time_after(jiffies, priv->stats_timestamp + 1 * HZ)) { @@ -706,7 +705,7 @@ prism54_get_scan(struct net_device *ndev, struct iw_request_info *info, * Starting with WE-17, the buffer can be as big as needed. * But the device won't repport anything if you change the value * of IWMAX_BSS=24. */ - + rvalue |= mgt_get_request(priv, DOT11_OID_BSSLIST, 0, NULL, &r); bsslist = r.ptr; @@ -786,7 +785,7 @@ prism54_get_essid(struct net_device *ndev, struct iw_request_info *info, return rvalue; } -/* Provides no functionality, just completes the ioctl. In essence this is a +/* Provides no functionality, just completes the ioctl. In essence this is a * just a cosmetic ioctl. */ static int @@ -1105,7 +1104,7 @@ prism54_set_encode(struct net_device *ndev, struct iw_request_info *info, &key); } /* - * If a valid key is set, encryption should be enabled + * If a valid key is set, encryption should be enabled * (user may turn it off later). * This is also how "iwconfig ethX key on" works */ @@ -1127,7 +1126,7 @@ prism54_set_encode(struct net_device *ndev, struct iw_request_info *info, } /* now read the flags */ if (dwrq->flags & IW_ENCODE_DISABLED) { - /* Encoding disabled, + /* Encoding disabled, * authen = DOT11_AUTH_OS; * invoke = 0; * exunencrypt = 0; */ @@ -1215,7 +1214,7 @@ prism54_get_txpower(struct net_device *ndev, struct iw_request_info *info, vwrq->value = (s32) r.u / 4; vwrq->fixed = 1; /* radio is not turned of - * btw: how is possible to turn off only the radio + * btw: how is possible to turn off only the radio */ vwrq->disabled = 0; @@ -2355,17 +2354,17 @@ prism54_process_trap_helper(islpci_private *priv, enum oid_num_t oid, handle_request(priv, mlme, oid); send_formatted_event(priv, "Authenticate request (ex)", mlme, 1); - if (priv->iw_mode != IW_MODE_MASTER + if (priv->iw_mode != IW_MODE_MASTER && mlmeex->state != DOT11_STATE_AUTHING) break; confirm = kmalloc(sizeof(struct obj_mlmeex) + 6, GFP_ATOMIC); - if (!confirm) + if (!confirm) break; memcpy(&confirm->address, mlmeex->address, ETH_ALEN); - printk(KERN_DEBUG "Authenticate from: address:\t%02x:%02x:%02x:%02x:%02x:%02x\n", + printk(KERN_DEBUG "Authenticate from: address:\t%02x:%02x:%02x:%02x:%02x:%02x\n", mlmeex->address[0], mlmeex->address[1], mlmeex->address[2], @@ -2399,10 +2398,10 @@ prism54_process_trap_helper(islpci_private *priv, enum oid_num_t oid, handle_request(priv, mlme, oid); send_formatted_event(priv, "Associate request (ex)", mlme, 1); - if (priv->iw_mode != IW_MODE_MASTER + if (priv->iw_mode != IW_MODE_MASTER && mlmeex->state != DOT11_STATE_ASSOCING) break; - + confirm = kmalloc(sizeof(struct obj_mlmeex), GFP_ATOMIC); if (!confirm) @@ -2418,7 +2417,7 @@ prism54_process_trap_helper(islpci_private *priv, enum oid_num_t oid, if (!wpa_ie_len) { printk(KERN_DEBUG "No WPA IE found from " - "address:\t%02x:%02x:%02x:%02x:%02x:%02x\n", + "address:\t%02x:%02x:%02x:%02x:%02x:%02x\n", mlmeex->address[0], mlmeex->address[1], mlmeex->address[2], @@ -2436,14 +2435,14 @@ prism54_process_trap_helper(islpci_private *priv, enum oid_num_t oid, mgt_set_varlen(priv, oid, confirm, wpa_ie_len); kfree(confirm); - + break; case DOT11_OID_REASSOCIATEEX: handle_request(priv, mlme, oid); send_formatted_event(priv, "Reassociate request (ex)", mlme, 1); - if (priv->iw_mode != IW_MODE_MASTER + if (priv->iw_mode != IW_MODE_MASTER && mlmeex->state != DOT11_STATE_ASSOCING) break; @@ -2462,7 +2461,7 @@ prism54_process_trap_helper(islpci_private *priv, enum oid_num_t oid, if (!wpa_ie_len) { printk(KERN_DEBUG "No WPA IE found from " - "address:\t%02x:%02x:%02x:%02x:%02x:%02x\n", + "address:\t%02x:%02x:%02x:%02x:%02x:%02x\n", mlmeex->address[0], mlmeex->address[1], mlmeex->address[2], @@ -2474,13 +2473,13 @@ prism54_process_trap_helper(islpci_private *priv, enum oid_num_t oid, break; } - confirm->size = wpa_ie_len; + confirm->size = wpa_ie_len; memcpy(&confirm->data, wpa_ie, wpa_ie_len); mgt_set_varlen(priv, oid, confirm, wpa_ie_len); kfree(confirm); - + break; default: @@ -2547,10 +2546,10 @@ enum { #define PRISM2_HOSTAPD_GENERIC_ELEMENT_HDR_LEN \ ((int) (&((struct prism2_hostapd_param *) 0)->u.generic_elem.data)) -/* Maximum length for algorithm names (-1 for nul termination) +/* Maximum length for algorithm names (-1 for nul termination) * used in ioctl() */ #define HOSTAP_CRYPT_ALG_NAME_LEN 16 - + struct prism2_hostapd_param { u32 cmd; u8 sta_addr[ETH_ALEN]; @@ -2623,7 +2622,7 @@ prism2_ioctl_set_encryption(struct net_device *dev, &key); } /* - * If a valid key is set, encryption should be enabled + * If a valid key is set, encryption should be enabled * (user may turn it off later). * This is also how "iwconfig ethX key on" works */ @@ -2645,7 +2644,7 @@ prism2_ioctl_set_encryption(struct net_device *dev, } /* now read the flags */ if (param->u.crypt.flags & IW_ENCODE_DISABLED) { - /* Encoding disabled, + /* Encoding disabled, * authen = DOT11_AUTH_OS; * invoke = 0; * exunencrypt = 0; */ @@ -2712,7 +2711,7 @@ prism2_ioctl_set_generic_element(struct net_device *ndev, ret = mgt_set_varlen(priv, DOT11_OID_ATTACHMENT, attach, len); - if (ret == 0) + if (ret == 0) printk(KERN_DEBUG "%s: WPA IE Attachment was set\n", ndev->name); } @@ -2872,7 +2871,7 @@ prism54_set_wpa(struct net_device *ndev, struct iw_request_info *info, mlme = DOT11_MLME_AUTO; printk("%s: Disabling WPA\n", ndev->name); break; - case 2: + case 2: case 1: /* WPA */ printk("%s: Enabling WPA\n", ndev->name); break; diff --git a/drivers/net/wireless/prism54/isl_ioctl.h b/drivers/net/wireless/prism54/isl_ioctl.h index 0802fa64996..bcfbfb9281d 100644 --- a/drivers/net/wireless/prism54/isl_ioctl.h +++ b/drivers/net/wireless/prism54/isl_ioctl.h @@ -1,5 +1,4 @@ /* - * * Copyright (C) 2002 Intersil Americas Inc. * (C) 2003 Aurelien Alleaume <slts@free.fr> * (C) 2003 Luis R. Rodriguez <mcgrof@ruslug.rutgers.edu> diff --git a/drivers/net/wireless/prism54/isl_oid.h b/drivers/net/wireless/prism54/isl_oid.h index 419edf7ccf1..b7534c2869c 100644 --- a/drivers/net/wireless/prism54/isl_oid.h +++ b/drivers/net/wireless/prism54/isl_oid.h @@ -1,6 +1,4 @@ /* - * - * * Copyright (C) 2003 Herbert Valerio Riedel <hvr@gnu.org> * Copyright (C) 2004 Luis R. Rodriguez <mcgrof@ruslug.rutgers.edu> * Copyright (C) 2004 Aurelien Alleaume <slts@free.fr> @@ -23,7 +21,7 @@ #if !defined(_ISL_OID_H) #define _ISL_OID_H -/* +/* * MIB related constant and structure definitions for communicating * with the device firmware */ @@ -99,21 +97,21 @@ struct obj_attachment { char data[0]; } __attribute__((packed)); -/* +/* * in case everything's ok, the inlined function below will be * optimized away by the compiler... */ static inline void __bug_on_wrong_struct_sizes(void) { - BUG_ON(sizeof (struct obj_ssid) != 34); - BUG_ON(sizeof (struct obj_key) != 34); - BUG_ON(sizeof (struct obj_mlme) != 12); - BUG_ON(sizeof (struct obj_mlmeex) != 14); - BUG_ON(sizeof (struct obj_buffer) != 8); - BUG_ON(sizeof (struct obj_bss) != 60); - BUG_ON(sizeof (struct obj_bsslist) != 4); - BUG_ON(sizeof (struct obj_frequencies) != 2); + BUILD_BUG_ON(sizeof (struct obj_ssid) != 34); + BUILD_BUG_ON(sizeof (struct obj_key) != 34); + BUILD_BUG_ON(sizeof (struct obj_mlme) != 12); + BUILD_BUG_ON(sizeof (struct obj_mlmeex) != 14); + BUILD_BUG_ON(sizeof (struct obj_buffer) != 8); + BUILD_BUG_ON(sizeof (struct obj_bss) != 60); + BUILD_BUG_ON(sizeof (struct obj_bsslist) != 4); + BUILD_BUG_ON(sizeof (struct obj_frequencies) != 2); } enum dot11_state_t { @@ -154,13 +152,13 @@ enum dot11_priv_t { /* Prism "Nitro" / Frameburst / "Packet Frame Grouping" * Value is in microseconds. Represents the # microseconds - * the firmware will take to group frames before sending out then out + * the firmware will take to group frames before sending out then out * together with a CSMA contention. Without this all frames are - * sent with a CSMA contention. - * Bibliography: + * sent with a CSMA contention. + * Bibliography: * http://www.hpl.hp.com/personal/Jean_Tourrilhes/Papers/Packet.Frame.Grouping.html */ -enum dot11_maxframeburst_t { +enum dot11_maxframeburst_t { /* Values for DOT11_OID_MAXFRAMEBURST */ DOT11_MAXFRAMEBURST_OFF = 0, /* Card firmware default */ DOT11_MAXFRAMEBURST_MIXED_SAFE = 650, /* 802.11 a,b,g safe */ @@ -176,9 +174,9 @@ enum dot11_maxframeburst_t { /* Support for 802.11 long and short frame preambles. * Long preamble uses 128-bit sync field, 8-bit CRC * Short preamble uses 56-bit sync field, 16-bit CRC - * + * * 802.11a -- not sure, both optionally ? - * 802.11b supports long and optionally short + * 802.11b supports long and optionally short * 802.11g supports both */ enum dot11_preamblesettings_t { DOT11_PREAMBLESETTING_LONG = 0, @@ -194,7 +192,7 @@ enum dot11_preamblesettings_t { * Long uses 802.11a slot timing (9 usec ?) * Short uses 802.11b slot timing (20 use ?) */ enum dot11_slotsettings_t { - DOT11_SLOTSETTINGS_LONG = 0, + DOT11_SLOTSETTINGS_LONG = 0, /* Allows *only* long 802.11b slot timing */ DOT11_SLOTSETTINGS_SHORT = 1, /* Allows *only* long 802.11a slot timing */ @@ -203,7 +201,7 @@ enum dot11_slotsettings_t { }; /* All you need to know, ERP is "Extended Rate PHY". - * An Extended Rate PHY (ERP) STA or AP shall support three different + * An Extended Rate PHY (ERP) STA or AP shall support three different * preamble and header formats: * Long preamble (refer to above) * Short preamble (refer to above) @@ -221,7 +219,7 @@ enum do11_nonerpstatus_t { /* (ERP is "Extended Rate PHY") Way to read NONERP is NON-ERP-* * The key here is DOT11 NON ERP NEVER protects against * NON ERP STA's. You *don't* want this unless - * you know what you are doing. It means you will only + * you know what you are doing. It means you will only * get Extended Rate capabilities */ enum dot11_nonerpprotection_t { DOT11_NONERP_NEVER = 0, @@ -229,13 +227,13 @@ enum dot11_nonerpprotection_t { DOT11_NONERP_DYNAMIC = 2 }; -/* Preset OID configuration for 802.11 modes - * Note: DOT11_OID_CW[MIN|MAX] hold the values of the +/* Preset OID configuration for 802.11 modes + * Note: DOT11_OID_CW[MIN|MAX] hold the values of the * DCS MIN|MAX backoff used */ enum dot11_profile_t { /* And set/allowed values */ /* Allowed values for DOT11_OID_PROFILES */ DOT11_PROFILE_B_ONLY = 0, - /* DOT11_OID_RATES: 1, 2, 5.5, 11Mbps + /* DOT11_OID_RATES: 1, 2, 5.5, 11Mbps * DOT11_OID_PREAMBLESETTINGS: DOT11_PREAMBLESETTING_DYNAMIC * DOT11_OID_CWMIN: 31 * DOT11_OID_NONEPROTECTION: DOT11_NOERP_DYNAMIC @@ -275,7 +273,7 @@ enum oid_inl_conformance_t { OID_INL_CONFORMANCE_NONE = 0, /* Perform active scanning */ OID_INL_CONFORMANCE_STRICT = 1, /* Strictly adhere to 802.11d */ OID_INL_CONFORMANCE_FLEXIBLE = 2, /* Use passed 802.11d info to - * determine channel AND/OR just make assumption that active + * determine channel AND/OR just make assumption that active * channels are valid channels */ }; diff --git a/drivers/net/wireless/prism54/islpci_dev.c b/drivers/net/wireless/prism54/islpci_dev.c index e35fcb2543c..f057fd9fcd7 100644 --- a/drivers/net/wireless/prism54/islpci_dev.c +++ b/drivers/net/wireless/prism54/islpci_dev.c @@ -1,5 +1,4 @@ /* - * * Copyright (C) 2002 Intersil Americas Inc. * Copyright (C) 2003 Herbert Valerio Riedel <hvr@gnu.org> * Copyright (C) 2003 Luis R. Rodriguez <mcgrof@ruslug.rutgers.edu> @@ -413,7 +412,7 @@ prism54_bring_down(islpci_private *priv) islpci_set_state(priv, PRV_STATE_PREBOOT); /* disable all device interrupts in case they weren't */ - isl38xx_disable_interrupts(priv->device_base); + isl38xx_disable_interrupts(priv->device_base); /* For safety reasons, we may want to ensure that no DMA transfer is * currently in progress by emptying the TX and RX queues. */ @@ -480,7 +479,7 @@ islpci_reset_if(islpci_private *priv) DEFINE_WAIT(wait); prepare_to_wait(&priv->reset_done, &wait, TASK_UNINTERRUPTIBLE); - + /* now the last step is to reset the interface */ isl38xx_interface_reset(priv->device_base, priv->device_host_address); islpci_set_state(priv, PRV_STATE_PREINIT); @@ -488,7 +487,7 @@ islpci_reset_if(islpci_private *priv) for(count = 0; count < 2 && result; count++) { /* The software reset acknowledge needs about 220 msec here. * Be conservative and wait for up to one second. */ - + remaining = schedule_timeout_uninterruptible(HZ); if(remaining > 0) { @@ -496,7 +495,7 @@ islpci_reset_if(islpci_private *priv) break; } - /* If we're here it's because our IRQ hasn't yet gone through. + /* If we're here it's because our IRQ hasn't yet gone through. * Retry a bit more... */ printk(KERN_ERR "%s: no 'reset complete' IRQ seen - retrying\n", @@ -514,7 +513,7 @@ islpci_reset_if(islpci_private *priv) /* Now that the device is 100% up, let's allow * for the other interrupts -- - * NOTE: this is not *yet* true since we've only allowed the + * NOTE: this is not *yet* true since we've only allowed the * INIT interrupt on the IRQ line. We can perhaps poll * the IRQ line until we know for sure the reset went through */ isl38xx_enable_common_interrupts(priv->device_base); @@ -716,7 +715,7 @@ islpci_alloc_memory(islpci_private *priv) prism54_acl_init(&priv->acl); prism54_wpa_bss_ie_init(priv); - if (mgt_init(priv)) + if (mgt_init(priv)) goto out_free; return 0; diff --git a/drivers/net/wireless/prism54/islpci_dev.h b/drivers/net/wireless/prism54/islpci_dev.h index 2f7e525d0cf..a9aa1662eaa 100644 --- a/drivers/net/wireless/prism54/islpci_dev.h +++ b/drivers/net/wireless/prism54/islpci_dev.h @@ -1,6 +1,5 @@ /* - * - * Copyright (C) 2002 Intersil Americas Inc. + * Copyright (C) 2002 Intersil Americas Inc. * Copyright (C) 2003 Herbert Valerio Riedel <hvr@gnu.org> * Copyright (C) 2003 Luis R. Rodriguez <mcgrof@ruslug.rutgers.edu> * Copyright (C) 2003 Aurelien Alleaume <slts@free.fr> @@ -72,12 +71,12 @@ struct islpci_bss_wpa_ie { u8 bssid[ETH_ALEN]; u8 wpa_ie[MAX_WPA_IE_LEN]; size_t wpa_ie_len; - + }; typedef struct { spinlock_t slock; /* generic spinlock; */ - + u32 priv_oid; /* our mib cache */ @@ -85,7 +84,7 @@ typedef struct { struct rw_semaphore mib_sem; void **mib; char nickname[IW_ESSID_MAX_SIZE+1]; - + /* Take care of the wireless stats */ struct work_struct stats_work; struct semaphore stats_sem; @@ -120,7 +119,7 @@ typedef struct { struct net_device *ndev; /* device queue interface members */ - struct isl38xx_cb *control_block; /* device control block + struct isl38xx_cb *control_block; /* device control block (== driver_mem_address!) */ /* Each queue has three indexes: diff --git a/drivers/net/wireless/prism54/islpci_eth.c b/drivers/net/wireless/prism54/islpci_eth.c index 103a3787773..b1122912ee2 100644 --- a/drivers/net/wireless/prism54/islpci_eth.c +++ b/drivers/net/wireless/prism54/islpci_eth.c @@ -1,5 +1,4 @@ /* - * * Copyright (C) 2002 Intersil Americas Inc. * Copyright (C) 2004 Aurelien Alleaume <slts@free.fr> * This program is free software; you can redistribute it and/or modify @@ -48,7 +47,7 @@ islpci_eth_cleanup_transmit(islpci_private *priv, /* read the index of the first fragment to be freed */ index = priv->free_data_tx % ISL38XX_CB_TX_QSIZE; - /* check for holes in the arrays caused by multi fragment frames + /* check for holes in the arrays caused by multi fragment frames * searching for the last fragment of a frame */ if (priv->pci_map_tx_address[index] != (dma_addr_t) NULL) { /* entry is the last fragment of a frame @@ -253,6 +252,7 @@ islpci_monitor_rx(islpci_private *priv, struct sk_buff **skb) * header and without the FCS. But there a is a bit that * indicates if the packet is corrupted :-) */ struct rfmon_header *hdr = (struct rfmon_header *) (*skb)->data; + if (hdr->flags & 0x01) /* This one is bad. Drop it ! */ return -1; @@ -284,7 +284,7 @@ islpci_monitor_rx(islpci_private *priv, struct sk_buff **skb) (struct avs_80211_1_header *) skb_push(*skb, sizeof (struct avs_80211_1_header)); - + avs->version = cpu_to_be32(P80211CAPTURE_VERSION); avs->length = cpu_to_be32(sizeof (struct avs_80211_1_header)); avs->mactime = cpu_to_be64(le64_to_cpu(clock)); @@ -390,7 +390,7 @@ islpci_eth_receive(islpci_private *priv) struct rx_annex_header *annex = (struct rx_annex_header *) skb->data; wstats.level = annex->rfmon.rssi; - /* The noise value can be a bit outdated if nobody's + /* The noise value can be a bit outdated if nobody's * reading wireless stats... */ wstats.noise = priv->local_iwstatistics.qual.noise; wstats.qual = wstats.level - wstats.noise; @@ -464,10 +464,8 @@ islpci_eth_receive(islpci_private *priv) break; } /* update the fragment address */ - control_block->rx_data_low[index].address = cpu_to_le32((u32) - priv-> - pci_map_rx_address - [index]); + control_block->rx_data_low[index].address = + cpu_to_le32((u32)priv->pci_map_rx_address[index]); wmb(); /* increment the driver read pointer */ @@ -485,9 +483,11 @@ void islpci_do_reset_and_wake(struct work_struct *work) { islpci_private *priv = container_of(work, islpci_private, reset_task); + islpci_reset(priv, 1); - netif_wake_queue(priv->ndev); priv->reset_task_pending = 0; + smp_wmb(); + netif_wake_queue(priv->ndev); } void @@ -499,12 +499,14 @@ islpci_eth_tx_timeout(struct net_device *ndev) /* increment the transmit error counter */ statistics->tx_errors++; - printk(KERN_WARNING "%s: tx_timeout", ndev->name); if (!priv->reset_task_pending) { - priv->reset_task_pending = 1; - printk(", scheduling a reset"); + printk(KERN_WARNING + "%s: tx_timeout, scheduling reset", ndev->name); netif_stop_queue(ndev); + priv->reset_task_pending = 1; schedule_work(&priv->reset_task); + } else { + printk(KERN_WARNING + "%s: tx_timeout, waiting for reset", ndev->name); } - printk("\n"); } diff --git a/drivers/net/wireless/prism54/islpci_eth.h b/drivers/net/wireless/prism54/islpci_eth.h index 99d37eda9f0..5bf820defbd 100644 --- a/drivers/net/wireless/prism54/islpci_eth.h +++ b/drivers/net/wireless/prism54/islpci_eth.h @@ -1,5 +1,4 @@ /* - * * Copyright (C) 2002 Intersil Americas Inc. * * This program is free software; you can redistribute it and/or modify diff --git a/drivers/net/wireless/prism54/islpci_hotplug.c b/drivers/net/wireless/prism54/islpci_hotplug.c index f692dccf0d0..58257b40c04 100644 --- a/drivers/net/wireless/prism54/islpci_hotplug.c +++ b/drivers/net/wireless/prism54/islpci_hotplug.c @@ -1,5 +1,4 @@ /* - * * Copyright (C) 2002 Intersil Americas Inc. * Copyright (C) 2003 Herbert Valerio Riedel <hvr@gnu.org> * @@ -40,8 +39,8 @@ static int init_pcitm = 0; module_param(init_pcitm, int, 0); /* In this order: vendor, device, subvendor, subdevice, class, class_mask, - * driver_data - * If you have an update for this please contact prism54-devel@prism54.org + * driver_data + * If you have an update for this please contact prism54-devel@prism54.org * The latest list can be found at http://prism54.org/supported_cards.php */ static const struct pci_device_id prism54_id_tbl[] = { /* Intersil PRISM Duette/Prism GT Wireless LAN adapter */ @@ -132,15 +131,15 @@ prism54_probe(struct pci_dev *pdev, const struct pci_device_id *id) /* 0x40 is the programmable timer to configure the response timeout (TRDY_TIMEOUT) * 0x41 is the programmable timer to configure the retry timeout (RETRY_TIMEOUT) - * The RETRY_TIMEOUT is used to set the number of retries that the core, as a - * Master, will perform before abandoning a cycle. The default value for - * RETRY_TIMEOUT is 0x80, which far exceeds the PCI 2.1 requirement for new - * devices. A write of zero to the RETRY_TIMEOUT register disables this - * function to allow use with any non-compliant legacy devices that may - * execute more retries. + * The RETRY_TIMEOUT is used to set the number of retries that the core, as a + * Master, will perform before abandoning a cycle. The default value for + * RETRY_TIMEOUT is 0x80, which far exceeds the PCI 2.1 requirement for new + * devices. A write of zero to the RETRY_TIMEOUT register disables this + * function to allow use with any non-compliant legacy devices that may + * execute more retries. * - * Writing zero to both these two registers will disable both timeouts and - * *can* solve problems caused by devices that are slow to respond. + * Writing zero to both these two registers will disable both timeouts and + * *can* solve problems caused by devices that are slow to respond. * Make this configurable - MSW */ if ( init_pcitm >= 0 ) { @@ -171,14 +170,15 @@ prism54_probe(struct pci_dev *pdev, const struct pci_device_id *id) pci_set_master(pdev); /* enable MWI */ - pci_set_mwi(pdev); + if (!pci_set_mwi(pdev)) + printk(KERN_INFO "%s: pci_set_mwi(pdev) succeeded\n", DRV_NAME); /* setup the network device interface and its structure */ if (!(ndev = islpci_setup(pdev))) { /* error configuring the driver as a network device */ printk(KERN_ERR "%s: could not configure network device\n", DRV_NAME); - goto do_pci_release_regions; + goto do_pci_clear_mwi; } priv = netdev_priv(ndev); @@ -208,6 +208,8 @@ prism54_probe(struct pci_dev *pdev, const struct pci_device_id *id) pci_set_drvdata(pdev, NULL); free_netdev(ndev); priv = NULL; + do_pci_clear_mwi: + pci_clear_mwi(pdev); do_pci_release_regions: pci_release_regions(pdev); do_pci_disable_device: @@ -241,7 +243,7 @@ prism54_remove(struct pci_dev *pdev) isl38xx_disable_interrupts(priv->device_base); islpci_set_state(priv, PRV_STATE_OFF); /* This bellow causes a lockup at rmmod time. It might be - * because some interrupts still linger after rmmod time, + * because some interrupts still linger after rmmod time, * see bug #17 */ /* pci_set_power_state(pdev, 3);*/ /* try to power-off */ } @@ -255,6 +257,8 @@ prism54_remove(struct pci_dev *pdev) free_netdev(ndev); priv = NULL; + pci_clear_mwi(pdev); + pci_release_regions(pdev); pci_disable_device(pdev); @@ -288,12 +292,19 @@ prism54_resume(struct pci_dev *pdev) { struct net_device *ndev = pci_get_drvdata(pdev); islpci_private *priv = ndev ? netdev_priv(ndev) : NULL; - BUG_ON(!priv); + int err; - pci_enable_device(pdev); + BUG_ON(!priv); printk(KERN_NOTICE "%s: got resume request\n", ndev->name); + err = pci_enable_device(pdev); + if (err) { + printk(KERN_ERR "%s: pci_enable_device failed on resume\n", + ndev->name); + return err; + } + pci_restore_state(pdev); /* alright let's go into the PREBOOT state */ diff --git a/drivers/net/wireless/prism54/islpci_mgt.c b/drivers/net/wireless/prism54/islpci_mgt.c index 656ec9fa712..2246f7930b4 100644 --- a/drivers/net/wireless/prism54/islpci_mgt.c +++ b/drivers/net/wireless/prism54/islpci_mgt.c @@ -1,5 +1,4 @@ /* - * * Copyright (C) 2002 Intersil Americas Inc. * Copyright 2004 Jens Maurer <Jens.Maurer@gmx.net> * @@ -502,7 +501,7 @@ islpci_mgt_transaction(struct net_device *ndev, printk(KERN_WARNING "%s: timeout waiting for mgmt response\n", ndev->name); - /* TODO: we should reset the device here */ + /* TODO: we should reset the device here */ out: finish_wait(&priv->mgmt_wqueue, &wait); up(&priv->mgmt_sem); diff --git a/drivers/net/wireless/prism54/islpci_mgt.h b/drivers/net/wireless/prism54/islpci_mgt.h index 2982be3363e..fc53b587b72 100644 --- a/drivers/net/wireless/prism54/islpci_mgt.h +++ b/drivers/net/wireless/prism54/islpci_mgt.h @@ -1,5 +1,4 @@ /* - * * Copyright (C) 2002 Intersil Americas Inc. * Copyright (C) 2003 Luis R. Rodriguez <mcgrof@ruslug.rutgers.edu> * @@ -36,8 +35,8 @@ extern int pc_debug; /* General driver definitions */ -#define PCIDEVICE_LATENCY_TIMER_MIN 0x40 -#define PCIDEVICE_LATENCY_TIMER_VAL 0x50 +#define PCIDEVICE_LATENCY_TIMER_MIN 0x40 +#define PCIDEVICE_LATENCY_TIMER_VAL 0x50 /* Debugging verbose definitions */ #define SHOW_NOTHING 0x00 /* overrules everything */ diff --git a/drivers/net/wireless/prism54/oid_mgt.c b/drivers/net/wireless/prism54/oid_mgt.c index ebb23878583..fbc52b6a302 100644 --- a/drivers/net/wireless/prism54/oid_mgt.c +++ b/drivers/net/wireless/prism54/oid_mgt.c @@ -1,4 +1,4 @@ -/* +/* * Copyright (C) 2003,2004 Aurelien Alleaume <slts@free.fr> * * This program is free software; you can redistribute it and/or modify @@ -503,7 +503,7 @@ mgt_set_varlen(islpci_private *priv, enum oid_num_t n, void *data, int extra_len } if (ret || response_op == PIMFOR_OP_ERROR) ret = -EIO; - } else + } else ret = -EIO; /* re-set given data to what it was */ @@ -727,7 +727,7 @@ mgt_commit(islpci_private *priv) * MEDIUMLIMIT,BEACONPERIOD,DTIMPERIOD,ATIMWINDOW,LISTENINTERVAL * FREQUENCY,EXTENDEDRATES. * - * The way to do this is to set ESSID. Note though that they may get + * The way to do this is to set ESSID. Note though that they may get * unlatch before though by setting another OID. */ #if 0 void diff --git a/drivers/net/wireless/prism54/prismcompat.h b/drivers/net/wireless/prism54/prismcompat.h index d71eca55a30..aa1d1747784 100644 --- a/drivers/net/wireless/prism54/prismcompat.h +++ b/drivers/net/wireless/prism54/prismcompat.h @@ -1,4 +1,4 @@ -/* +/* * (C) 2004 Margit Schubert-While <margitsw@t-online.de> * * This program is free software; you can redistribute it and/or modify @@ -16,7 +16,7 @@ * */ -/* +/* * Compatibility header file to aid support of different kernel versions */ diff --git a/drivers/net/wireless/zd1201.c b/drivers/net/wireless/zd1201.c index 36b29ff0581..6cb66a356c9 100644 --- a/drivers/net/wireless/zd1201.c +++ b/drivers/net/wireless/zd1201.c @@ -1828,10 +1828,8 @@ err_start: /* Leave the device in reset state */ zd1201_docmd(zd, ZD1201_CMDCODE_INIT, 0, 0, 0); err_zd: - if (zd->tx_urb) - usb_free_urb(zd->tx_urb); - if (zd->rx_urb) - usb_free_urb(zd->rx_urb); + usb_free_urb(zd->tx_urb); + usb_free_urb(zd->rx_urb); kfree(zd); return err; } diff --git a/drivers/net/wireless/zd1211rw/zd_chip.c b/drivers/net/wireless/zd1211rw/zd_chip.c index aa661b2b76c..8be99ebbe1c 100644 --- a/drivers/net/wireless/zd1211rw/zd_chip.c +++ b/drivers/net/wireless/zd1211rw/zd_chip.c @@ -1076,6 +1076,31 @@ static int set_mandatory_rates(struct zd_chip *chip, enum ieee80211_std std) return zd_iowrite32_locked(chip, rates, CR_MANDATORY_RATE_TBL); } +int zd_chip_set_rts_cts_rate_locked(struct zd_chip *chip, + u8 rts_rate, int preamble) +{ + int rts_mod = ZD_RX_CCK; + u32 value = 0; + + /* Modulation bit */ + if (ZD_CS_TYPE(rts_rate) == ZD_CS_OFDM) + rts_mod = ZD_RX_OFDM; + + dev_dbg_f(zd_chip_dev(chip), "rts_rate=%x preamble=%x\n", + rts_rate, preamble); + + value |= rts_rate << RTSCTS_SH_RTS_RATE; + value |= rts_mod << RTSCTS_SH_RTS_MOD_TYPE; + value |= preamble << RTSCTS_SH_RTS_PMB_TYPE; + value |= preamble << RTSCTS_SH_CTS_PMB_TYPE; + + /* We always send 11M self-CTS messages, like the vendor driver. */ + value |= ZD_CCK_RATE_11M << RTSCTS_SH_CTS_RATE; + value |= ZD_RX_CCK << RTSCTS_SH_CTS_MOD_TYPE; + + return zd_iowrite32_locked(chip, value, CR_RTS_CTS_RATE); +} + int zd_chip_enable_hwint(struct zd_chip *chip) { int r; @@ -1355,17 +1380,12 @@ out: return r; } -int zd_chip_set_basic_rates(struct zd_chip *chip, u16 cr_rates) +int zd_chip_set_basic_rates_locked(struct zd_chip *chip, u16 cr_rates) { - int r; - - if (cr_rates & ~(CR_RATES_80211B|CR_RATES_80211G)) - return -EINVAL; + ZD_ASSERT((cr_rates & ~(CR_RATES_80211B | CR_RATES_80211G)) == 0); + dev_dbg_f(zd_chip_dev(chip), "%x\n", cr_rates); - mutex_lock(&chip->mutex); - r = zd_iowrite32_locked(chip, cr_rates, CR_BASIC_RATE_TBL); - mutex_unlock(&chip->mutex); - return r; + return zd_iowrite32_locked(chip, cr_rates, CR_BASIC_RATE_TBL); } static int ofdm_qual_db(u8 status_quality, u8 rate, unsigned int size) diff --git a/drivers/net/wireless/zd1211rw/zd_chip.h b/drivers/net/wireless/zd1211rw/zd_chip.h index ae59597ce4e..ca892b9a644 100644 --- a/drivers/net/wireless/zd1211rw/zd_chip.h +++ b/drivers/net/wireless/zd1211rw/zd_chip.h @@ -337,24 +337,24 @@ #define CR_MAC_PS_STATE CTL_REG(0x050C) #define CR_INTERRUPT CTL_REG(0x0510) -#define INT_TX_COMPLETE 0x00000001 -#define INT_RX_COMPLETE 0x00000002 -#define INT_RETRY_FAIL 0x00000004 -#define INT_WAKEUP 0x00000008 -#define INT_DTIM_NOTIFY 0x00000020 -#define INT_CFG_NEXT_BCN 0x00000040 -#define INT_BUS_ABORT 0x00000080 -#define INT_TX_FIFO_READY 0x00000100 -#define INT_UART 0x00000200 -#define INT_TX_COMPLETE_EN 0x00010000 -#define INT_RX_COMPLETE_EN 0x00020000 -#define INT_RETRY_FAIL_EN 0x00040000 -#define INT_WAKEUP_EN 0x00080000 -#define INT_DTIM_NOTIFY_EN 0x00200000 -#define INT_CFG_NEXT_BCN_EN 0x00400000 -#define INT_BUS_ABORT_EN 0x00800000 -#define INT_TX_FIFO_READY_EN 0x01000000 -#define INT_UART_EN 0x02000000 +#define INT_TX_COMPLETE (1 << 0) +#define INT_RX_COMPLETE (1 << 1) +#define INT_RETRY_FAIL (1 << 2) +#define INT_WAKEUP (1 << 3) +#define INT_DTIM_NOTIFY (1 << 5) +#define INT_CFG_NEXT_BCN (1 << 6) +#define INT_BUS_ABORT (1 << 7) +#define INT_TX_FIFO_READY (1 << 8) +#define INT_UART (1 << 9) +#define INT_TX_COMPLETE_EN (1 << 16) +#define INT_RX_COMPLETE_EN (1 << 17) +#define INT_RETRY_FAIL_EN (1 << 18) +#define INT_WAKEUP_EN (1 << 19) +#define INT_DTIM_NOTIFY_EN (1 << 21) +#define INT_CFG_NEXT_BCN_EN (1 << 22) +#define INT_BUS_ABORT_EN (1 << 23) +#define INT_TX_FIFO_READY_EN (1 << 24) +#define INT_UART_EN (1 << 25) #define CR_TSF_LOW_PART CTL_REG(0x0514) #define CR_TSF_HIGH_PART CTL_REG(0x0518) @@ -398,18 +398,18 @@ * device will use a rate in this table that is less than or equal to the rate * of the incoming frame which prompted the response */ #define CR_BASIC_RATE_TBL CTL_REG(0x0630) -#define CR_RATE_1M 0x0001 /* 802.11b */ -#define CR_RATE_2M 0x0002 /* 802.11b */ -#define CR_RATE_5_5M 0x0004 /* 802.11b */ -#define CR_RATE_11M 0x0008 /* 802.11b */ -#define CR_RATE_6M 0x0100 /* 802.11g */ -#define CR_RATE_9M 0x0200 /* 802.11g */ -#define CR_RATE_12M 0x0400 /* 802.11g */ -#define CR_RATE_18M 0x0800 /* 802.11g */ -#define CR_RATE_24M 0x1000 /* 802.11g */ -#define CR_RATE_36M 0x2000 /* 802.11g */ -#define CR_RATE_48M 0x4000 /* 802.11g */ -#define CR_RATE_54M 0x8000 /* 802.11g */ +#define CR_RATE_1M (1 << 0) /* 802.11b */ +#define CR_RATE_2M (1 << 1) /* 802.11b */ +#define CR_RATE_5_5M (1 << 2) /* 802.11b */ +#define CR_RATE_11M (1 << 3) /* 802.11b */ +#define CR_RATE_6M (1 << 8) /* 802.11g */ +#define CR_RATE_9M (1 << 9) /* 802.11g */ +#define CR_RATE_12M (1 << 10) /* 802.11g */ +#define CR_RATE_18M (1 << 11) /* 802.11g */ +#define CR_RATE_24M (1 << 12) /* 802.11g */ +#define CR_RATE_36M (1 << 13) /* 802.11g */ +#define CR_RATE_48M (1 << 14) /* 802.11g */ +#define CR_RATE_54M (1 << 15) /* 802.11g */ #define CR_RATES_80211G 0xff00 #define CR_RATES_80211B 0x000f @@ -420,15 +420,24 @@ #define CR_MANDATORY_RATE_TBL CTL_REG(0x0634) #define CR_RTS_CTS_RATE CTL_REG(0x0638) +/* These are all bit indexes in CR_RTS_CTS_RATE, so remember to shift. */ +#define RTSCTS_SH_RTS_RATE 0 +#define RTSCTS_SH_EXP_CTS_RATE 4 +#define RTSCTS_SH_RTS_MOD_TYPE 8 +#define RTSCTS_SH_RTS_PMB_TYPE 9 +#define RTSCTS_SH_CTS_RATE 16 +#define RTSCTS_SH_CTS_MOD_TYPE 24 +#define RTSCTS_SH_CTS_PMB_TYPE 25 + #define CR_WEP_PROTECT CTL_REG(0x063C) #define CR_RX_THRESHOLD CTL_REG(0x0640) /* register for controlling the LEDS */ #define CR_LED CTL_REG(0x0644) /* masks for controlling LEDs */ -#define LED1 0x0100 -#define LED2 0x0200 -#define LED_SW 0x0400 +#define LED1 (1 << 8) +#define LED2 (1 << 9) +#define LED_SW (1 << 10) /* Seems to indicate that the configuration is over. */ @@ -455,18 +464,18 @@ * registers, so one could argue it is a LOCK bit. But calling it * LOCK_PHY_REGS makes it confusing. */ -#define UNLOCK_PHY_REGS 0x0080 +#define UNLOCK_PHY_REGS (1 << 7) #define CR_DEVICE_STATE CTL_REG(0x0684) #define CR_UNDERRUN_CNT CTL_REG(0x0688) #define CR_RX_FILTER CTL_REG(0x068c) -#define RX_FILTER_ASSOC_RESPONSE 0x0002 -#define RX_FILTER_REASSOC_RESPONSE 0x0008 -#define RX_FILTER_PROBE_RESPONSE 0x0020 -#define RX_FILTER_BEACON 0x0100 -#define RX_FILTER_DISASSOC 0x0400 -#define RX_FILTER_AUTH 0x0800 +#define RX_FILTER_ASSOC_RESPONSE (1 << 1) +#define RX_FILTER_REASSOC_RESPONSE (1 << 3) +#define RX_FILTER_PROBE_RESPONSE (1 << 5) +#define RX_FILTER_BEACON (1 << 8) +#define RX_FILTER_DISASSOC (1 << 10) +#define RX_FILTER_AUTH (1 << 11) #define AP_RX_FILTER 0x0400feff #define STA_RX_FILTER 0x0000ffff @@ -794,6 +803,9 @@ void zd_chip_disable_rx(struct zd_chip *chip); int zd_chip_enable_hwint(struct zd_chip *chip); int zd_chip_disable_hwint(struct zd_chip *chip); +int zd_chip_set_rts_cts_rate_locked(struct zd_chip *chip, + u8 rts_rate, int preamble); + static inline int zd_get_encryption_type(struct zd_chip *chip, u32 *type) { return zd_ioread32(chip, CR_ENCRYPTION_TYPE, type); @@ -809,7 +821,17 @@ static inline int zd_chip_get_basic_rates(struct zd_chip *chip, u16 *cr_rates) return zd_ioread16(chip, CR_BASIC_RATE_TBL, cr_rates); } -int zd_chip_set_basic_rates(struct zd_chip *chip, u16 cr_rates); +int zd_chip_set_basic_rates_locked(struct zd_chip *chip, u16 cr_rates); + +static inline int zd_chip_set_basic_rates(struct zd_chip *chip, u16 cr_rates) +{ + int r; + + mutex_lock(&chip->mutex); + r = zd_chip_set_basic_rates_locked(chip, cr_rates); + mutex_unlock(&chip->mutex); + return r; +} static inline int zd_chip_set_rx_filter(struct zd_chip *chip, u32 filter) { diff --git a/drivers/net/wireless/zd1211rw/zd_def.h b/drivers/net/wireless/zd1211rw/zd_def.h index a13ec72eb30..fb22f62cf1f 100644 --- a/drivers/net/wireless/zd1211rw/zd_def.h +++ b/drivers/net/wireless/zd1211rw/zd_def.h @@ -39,6 +39,7 @@ do { \ if (!(x)) { \ pr_debug("%s:%d ASSERT %s VIOLATED!\n", \ __FILE__, __LINE__, __stringify(x)); \ + dump_stack(); \ } \ } while (0) #else diff --git a/drivers/net/wireless/zd1211rw/zd_ieee80211.c b/drivers/net/wireless/zd1211rw/zd_ieee80211.c index 66905f7b61f..189160efd2a 100644 --- a/drivers/net/wireless/zd1211rw/zd_ieee80211.c +++ b/drivers/net/wireless/zd1211rw/zd_ieee80211.c @@ -37,7 +37,12 @@ static const struct channel_range channel_ranges[] = { [ZD_REGDOMAIN_JAPAN] = { 1, 14}, [ZD_REGDOMAIN_SPAIN] = { 1, 14}, [ZD_REGDOMAIN_FRANCE] = { 1, 14}, - [ZD_REGDOMAIN_JAPAN_ADD] = {14, 15}, + + /* Japan originally only had channel 14 available (see CHNL_ID 0x40 in + * 802.11). However, in 2001 the range was extended to include channels + * 1-13. The ZyDAS devices still use the old region code but are + * designed to allow the extra channel access in Japan. */ + [ZD_REGDOMAIN_JAPAN_ADD] = { 1, 15}, }; const struct channel_range *zd_channel_range(u8 regdomain) @@ -133,9 +138,6 @@ int zd_find_channel(u8 *channel, const struct iw_freq *freq) int i, r; u32 mhz; - if (!(freq->flags & IW_FREQ_FIXED)) - return 0; - if (freq->m < 1000) { if (freq->m > NUM_CHANNELS || freq->m == 0) return -EINVAL; diff --git a/drivers/net/wireless/zd1211rw/zd_ieee80211.h b/drivers/net/wireless/zd1211rw/zd_ieee80211.h index f63245b0d96..26b8298dff8 100644 --- a/drivers/net/wireless/zd1211rw/zd_ieee80211.h +++ b/drivers/net/wireless/zd1211rw/zd_ieee80211.h @@ -50,6 +50,7 @@ static inline u8 zd_ofdm_plcp_header_rate( return header->prefix[0] & 0xf; } +/* These are referred to as zd_rates */ #define ZD_OFDM_RATE_6M 0xb #define ZD_OFDM_RATE_9M 0xf #define ZD_OFDM_RATE_12M 0xa @@ -64,7 +65,7 @@ struct cck_plcp_header { u8 service; __le16 length; __le16 crc16; -}; +} __attribute__((packed)); static inline u8 zd_cck_plcp_header_rate(const struct cck_plcp_header *header) { diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c index 5e4f4b70737..44f3cfd4cc1 100644 --- a/drivers/net/wireless/zd1211rw/zd_mac.c +++ b/drivers/net/wireless/zd1211rw/zd_mac.c @@ -32,6 +32,8 @@ static void ieee_init(struct ieee80211_device *ieee); static void softmac_init(struct ieee80211softmac_device *sm); +static void set_rts_cts_work(void *d); +static void set_basic_rates_work(void *d); static void housekeeping_init(struct zd_mac *mac); static void housekeeping_enable(struct zd_mac *mac); @@ -46,6 +48,8 @@ int zd_mac_init(struct zd_mac *mac, memset(mac, 0, sizeof(*mac)); spin_lock_init(&mac->lock); mac->netdev = netdev; + INIT_WORK(&mac->set_rts_cts_work, set_rts_cts_work, mac); + INIT_WORK(&mac->set_basic_rates_work, set_basic_rates_work, mac); ieee_init(ieee); softmac_init(ieee80211_priv(netdev)); @@ -213,6 +217,13 @@ int zd_mac_stop(struct net_device *netdev) housekeeping_disable(mac); ieee80211softmac_stop(netdev); + /* Ensure no work items are running or queued from this point */ + cancel_delayed_work(&mac->set_rts_cts_work); + cancel_delayed_work(&mac->set_basic_rates_work); + flush_workqueue(zd_workqueue); + mac->updating_rts_rate = 0; + mac->updating_basic_rates = 0; + zd_chip_disable_hwint(chip); zd_chip_switch_radio_off(chip); zd_chip_disable_int(chip); @@ -286,6 +297,186 @@ u8 zd_mac_get_regdomain(struct zd_mac *mac) return regdomain; } +/* Fallback to lowest rate, if rate is unknown. */ +static u8 rate_to_zd_rate(u8 rate) +{ + switch (rate) { + case IEEE80211_CCK_RATE_2MB: + return ZD_CCK_RATE_2M; + case IEEE80211_CCK_RATE_5MB: + return ZD_CCK_RATE_5_5M; + case IEEE80211_CCK_RATE_11MB: + return ZD_CCK_RATE_11M; + case IEEE80211_OFDM_RATE_6MB: + return ZD_OFDM_RATE_6M; + case IEEE80211_OFDM_RATE_9MB: + return ZD_OFDM_RATE_9M; + case IEEE80211_OFDM_RATE_12MB: + return ZD_OFDM_RATE_12M; + case IEEE80211_OFDM_RATE_18MB: + return ZD_OFDM_RATE_18M; + case IEEE80211_OFDM_RATE_24MB: + return ZD_OFDM_RATE_24M; + case IEEE80211_OFDM_RATE_36MB: + return ZD_OFDM_RATE_36M; + case IEEE80211_OFDM_RATE_48MB: + return ZD_OFDM_RATE_48M; + case IEEE80211_OFDM_RATE_54MB: + return ZD_OFDM_RATE_54M; + } + return ZD_CCK_RATE_1M; +} + +static u16 rate_to_cr_rate(u8 rate) +{ + switch (rate) { + case IEEE80211_CCK_RATE_2MB: + return CR_RATE_1M; + case IEEE80211_CCK_RATE_5MB: + return CR_RATE_5_5M; + case IEEE80211_CCK_RATE_11MB: + return CR_RATE_11M; + case IEEE80211_OFDM_RATE_6MB: + return CR_RATE_6M; + case IEEE80211_OFDM_RATE_9MB: + return CR_RATE_9M; + case IEEE80211_OFDM_RATE_12MB: + return CR_RATE_12M; + case IEEE80211_OFDM_RATE_18MB: + return CR_RATE_18M; + case IEEE80211_OFDM_RATE_24MB: + return CR_RATE_24M; + case IEEE80211_OFDM_RATE_36MB: + return CR_RATE_36M; + case IEEE80211_OFDM_RATE_48MB: + return CR_RATE_48M; + case IEEE80211_OFDM_RATE_54MB: + return CR_RATE_54M; + } + return CR_RATE_1M; +} + +static void try_enable_tx(struct zd_mac *mac) +{ + unsigned long flags; + + spin_lock_irqsave(&mac->lock, flags); + if (mac->updating_rts_rate == 0 && mac->updating_basic_rates == 0) + netif_wake_queue(mac->netdev); + spin_unlock_irqrestore(&mac->lock, flags); +} + +static void set_rts_cts_work(void *d) +{ + struct zd_mac *mac = d; + unsigned long flags; + u8 rts_rate; + unsigned int short_preamble; + + mutex_lock(&mac->chip.mutex); + + spin_lock_irqsave(&mac->lock, flags); + mac->updating_rts_rate = 0; + rts_rate = mac->rts_rate; + short_preamble = mac->short_preamble; + spin_unlock_irqrestore(&mac->lock, flags); + + zd_chip_set_rts_cts_rate_locked(&mac->chip, rts_rate, short_preamble); + mutex_unlock(&mac->chip.mutex); + + try_enable_tx(mac); +} + +static void set_basic_rates_work(void *d) +{ + struct zd_mac *mac = d; + unsigned long flags; + u16 basic_rates; + + mutex_lock(&mac->chip.mutex); + + spin_lock_irqsave(&mac->lock, flags); + mac->updating_basic_rates = 0; + basic_rates = mac->basic_rates; + spin_unlock_irqrestore(&mac->lock, flags); + + zd_chip_set_basic_rates_locked(&mac->chip, basic_rates); + mutex_unlock(&mac->chip.mutex); + + try_enable_tx(mac); +} + +static void bssinfo_change(struct net_device *netdev, u32 changes) +{ + struct zd_mac *mac = zd_netdev_mac(netdev); + struct ieee80211softmac_device *softmac = ieee80211_priv(netdev); + struct ieee80211softmac_bss_info *bssinfo = &softmac->bssinfo; + int need_set_rts_cts = 0; + int need_set_rates = 0; + u16 basic_rates; + unsigned long flags; + + dev_dbg_f(zd_mac_dev(mac), "changes: %x\n", changes); + + if (changes & IEEE80211SOFTMAC_BSSINFOCHG_SHORT_PREAMBLE) { + spin_lock_irqsave(&mac->lock, flags); + mac->short_preamble = bssinfo->short_preamble; + spin_unlock_irqrestore(&mac->lock, flags); + need_set_rts_cts = 1; + } + + if (changes & IEEE80211SOFTMAC_BSSINFOCHG_RATES) { + /* Set RTS rate to highest available basic rate */ + u8 rate = ieee80211softmac_highest_supported_rate(softmac, + &bssinfo->supported_rates, 1); + rate = rate_to_zd_rate(rate); + + spin_lock_irqsave(&mac->lock, flags); + if (rate != mac->rts_rate) { + mac->rts_rate = rate; + need_set_rts_cts = 1; + } + spin_unlock_irqrestore(&mac->lock, flags); + + /* Set basic rates */ + need_set_rates = 1; + if (bssinfo->supported_rates.count == 0) { + /* Allow the device to be flexible */ + basic_rates = CR_RATES_80211B | CR_RATES_80211G; + } else { + int i = 0; + basic_rates = 0; + + for (i = 0; i < bssinfo->supported_rates.count; i++) { + u16 rate = bssinfo->supported_rates.rates[i]; + if ((rate & IEEE80211_BASIC_RATE_MASK) == 0) + continue; + + rate &= ~IEEE80211_BASIC_RATE_MASK; + basic_rates |= rate_to_cr_rate(rate); + } + } + spin_lock_irqsave(&mac->lock, flags); + mac->basic_rates = basic_rates; + spin_unlock_irqrestore(&mac->lock, flags); + } + + /* Schedule any changes we made above */ + + spin_lock_irqsave(&mac->lock, flags); + if (need_set_rts_cts && !mac->updating_rts_rate) { + mac->updating_rts_rate = 1; + netif_stop_queue(mac->netdev); + queue_work(zd_workqueue, &mac->set_rts_cts_work); + } + if (need_set_rates && !mac->updating_basic_rates) { + mac->updating_basic_rates = 1; + netif_stop_queue(mac->netdev); + queue_work(zd_workqueue, &mac->set_basic_rates_work); + } + spin_unlock_irqrestore(&mac->lock, flags); +} + static void set_channel(struct net_device *netdev, u8 channel) { struct zd_mac *mac = zd_netdev_mac(netdev); @@ -295,7 +486,6 @@ static void set_channel(struct net_device *netdev, u8 channel) zd_chip_set_channel(&mac->chip, channel); } -/* TODO: Should not work in Managed mode. */ int zd_mac_request_channel(struct zd_mac *mac, u8 channel) { unsigned long lock_flags; @@ -317,31 +507,22 @@ int zd_mac_request_channel(struct zd_mac *mac, u8 channel) return 0; } -int zd_mac_get_channel(struct zd_mac *mac, u8 *channel, u8 *flags) +u8 zd_mac_get_channel(struct zd_mac *mac) { - struct ieee80211_device *ieee = zd_mac_to_ieee80211(mac); + u8 channel = zd_chip_get_channel(&mac->chip); - *channel = zd_chip_get_channel(&mac->chip); - if (ieee->iw_mode != IW_MODE_INFRA) { - spin_lock_irq(&mac->lock); - *flags = *channel == mac->requested_channel ? - MAC_FIXED_CHANNEL : 0; - spin_unlock(&mac->lock); - } else { - *flags = 0; - } - dev_dbg_f(zd_mac_dev(mac), "channel %u flags %u\n", *channel, *flags); - return 0; + dev_dbg_f(zd_mac_dev(mac), "channel %u\n", channel); + return channel; } /* If wrong rate is given, we are falling back to the slowest rate: 1MBit/s */ -static u8 cs_typed_rate(u8 cs_rate) +static u8 zd_rate_typed(u8 zd_rate) { static const u8 typed_rates[16] = { - [ZD_CS_CCK_RATE_1M] = ZD_CS_CCK|ZD_CS_CCK_RATE_1M, - [ZD_CS_CCK_RATE_2M] = ZD_CS_CCK|ZD_CS_CCK_RATE_2M, - [ZD_CS_CCK_RATE_5_5M] = ZD_CS_CCK|ZD_CS_CCK_RATE_5_5M, - [ZD_CS_CCK_RATE_11M] = ZD_CS_CCK|ZD_CS_CCK_RATE_11M, + [ZD_CCK_RATE_1M] = ZD_CS_CCK|ZD_CCK_RATE_1M, + [ZD_CCK_RATE_2M] = ZD_CS_CCK|ZD_CCK_RATE_2M, + [ZD_CCK_RATE_5_5M] = ZD_CS_CCK|ZD_CCK_RATE_5_5M, + [ZD_CCK_RATE_11M] = ZD_CS_CCK|ZD_CCK_RATE_11M, [ZD_OFDM_RATE_6M] = ZD_CS_OFDM|ZD_OFDM_RATE_6M, [ZD_OFDM_RATE_9M] = ZD_CS_OFDM|ZD_OFDM_RATE_9M, [ZD_OFDM_RATE_12M] = ZD_CS_OFDM|ZD_OFDM_RATE_12M, @@ -353,37 +534,7 @@ static u8 cs_typed_rate(u8 cs_rate) }; ZD_ASSERT(ZD_CS_RATE_MASK == 0x0f); - return typed_rates[cs_rate & ZD_CS_RATE_MASK]; -} - -/* Fallback to lowest rate, if rate is unknown. */ -static u8 rate_to_cs_rate(u8 rate) -{ - switch (rate) { - case IEEE80211_CCK_RATE_2MB: - return ZD_CS_CCK_RATE_2M; - case IEEE80211_CCK_RATE_5MB: - return ZD_CS_CCK_RATE_5_5M; - case IEEE80211_CCK_RATE_11MB: - return ZD_CS_CCK_RATE_11M; - case IEEE80211_OFDM_RATE_6MB: - return ZD_OFDM_RATE_6M; - case IEEE80211_OFDM_RATE_9MB: - return ZD_OFDM_RATE_9M; - case IEEE80211_OFDM_RATE_12MB: - return ZD_OFDM_RATE_12M; - case IEEE80211_OFDM_RATE_18MB: - return ZD_OFDM_RATE_18M; - case IEEE80211_OFDM_RATE_24MB: - return ZD_OFDM_RATE_24M; - case IEEE80211_OFDM_RATE_36MB: - return ZD_OFDM_RATE_36M; - case IEEE80211_OFDM_RATE_48MB: - return ZD_OFDM_RATE_48M; - case IEEE80211_OFDM_RATE_54MB: - return ZD_OFDM_RATE_54M; - } - return ZD_CS_CCK_RATE_1M; + return typed_rates[zd_rate & ZD_CS_RATE_MASK]; } int zd_mac_set_mode(struct zd_mac *mac, u32 mode) @@ -484,13 +635,13 @@ int zd_mac_get_range(struct zd_mac *mac, struct iw_range *range) return 0; } -static int zd_calc_tx_length_us(u8 *service, u8 cs_rate, u16 tx_length) +static int zd_calc_tx_length_us(u8 *service, u8 zd_rate, u16 tx_length) { static const u8 rate_divisor[] = { - [ZD_CS_CCK_RATE_1M] = 1, - [ZD_CS_CCK_RATE_2M] = 2, - [ZD_CS_CCK_RATE_5_5M] = 11, /* bits must be doubled */ - [ZD_CS_CCK_RATE_11M] = 11, + [ZD_CCK_RATE_1M] = 1, + [ZD_CCK_RATE_2M] = 2, + [ZD_CCK_RATE_5_5M] = 11, /* bits must be doubled */ + [ZD_CCK_RATE_11M] = 11, [ZD_OFDM_RATE_6M] = 6, [ZD_OFDM_RATE_9M] = 9, [ZD_OFDM_RATE_12M] = 12, @@ -504,15 +655,15 @@ static int zd_calc_tx_length_us(u8 *service, u8 cs_rate, u16 tx_length) u32 bits = (u32)tx_length * 8; u32 divisor; - divisor = rate_divisor[cs_rate]; + divisor = rate_divisor[zd_rate]; if (divisor == 0) return -EINVAL; - switch (cs_rate) { - case ZD_CS_CCK_RATE_5_5M: + switch (zd_rate) { + case ZD_CCK_RATE_5_5M: bits = (2*bits) + 10; /* round up to the next integer */ break; - case ZD_CS_CCK_RATE_11M: + case ZD_CCK_RATE_11M: if (service) { u32 t = bits % 11; *service &= ~ZD_PLCP_SERVICE_LENGTH_EXTENSION; @@ -532,16 +683,16 @@ enum { R2M_11A = 0x02, }; -static u8 cs_rate_to_modulation(u8 cs_rate, int flags) +static u8 zd_rate_to_modulation(u8 zd_rate, int flags) { u8 modulation; - modulation = cs_typed_rate(cs_rate); + modulation = zd_rate_typed(zd_rate); if (flags & R2M_SHORT_PREAMBLE) { switch (ZD_CS_RATE(modulation)) { - case ZD_CS_CCK_RATE_2M: - case ZD_CS_CCK_RATE_5_5M: - case ZD_CS_CCK_RATE_11M: + case ZD_CCK_RATE_2M: + case ZD_CCK_RATE_5_5M: + case ZD_CCK_RATE_11M: modulation |= ZD_CS_CCK_PREA_SHORT; return modulation; } @@ -558,39 +709,36 @@ static void cs_set_modulation(struct zd_mac *mac, struct zd_ctrlset *cs, { struct ieee80211softmac_device *softmac = ieee80211_priv(mac->netdev); u16 ftype = WLAN_FC_GET_TYPE(le16_to_cpu(hdr->frame_ctl)); - u8 rate, cs_rate; + u8 rate, zd_rate; int is_mgt = (ftype == IEEE80211_FTYPE_MGMT) != 0; + int is_multicast = is_multicast_ether_addr(hdr->addr1); + int short_preamble = ieee80211softmac_short_preamble_ok(softmac, + is_multicast, is_mgt); + int flags = 0; + + /* FIXME: 802.11a? */ + rate = ieee80211softmac_suggest_txrate(softmac, is_multicast, is_mgt); - /* FIXME: 802.11a? short preamble? */ - rate = ieee80211softmac_suggest_txrate(softmac, - is_multicast_ether_addr(hdr->addr1), is_mgt); + if (short_preamble) + flags |= R2M_SHORT_PREAMBLE; - cs_rate = rate_to_cs_rate(rate); - cs->modulation = cs_rate_to_modulation(cs_rate, 0); + zd_rate = rate_to_zd_rate(rate); + cs->modulation = zd_rate_to_modulation(zd_rate, flags); } static void cs_set_control(struct zd_mac *mac, struct zd_ctrlset *cs, struct ieee80211_hdr_4addr *header) { + struct ieee80211softmac_device *softmac = ieee80211_priv(mac->netdev); unsigned int tx_length = le16_to_cpu(cs->tx_length); u16 fctl = le16_to_cpu(header->frame_ctl); u16 ftype = WLAN_FC_GET_TYPE(fctl); u16 stype = WLAN_FC_GET_STYPE(fctl); /* - * CONTROL: - * - start at 0x00 - * - if fragment 0, enable bit 0 + * CONTROL TODO: * - if backoff needed, enable bit 0 * - if burst (backoff not needed) disable bit 0 - * - if multicast, enable bit 1 - * - if PS-POLL frame, enable bit 2 - * - if in INDEPENDENT_BSS mode and zd1205_DestPowerSave, then enable - * bit 4 (FIXME: wtf) - * - if frag_len > RTS threshold, set bit 5 as long if it isnt - * multicast or mgt - * - if bit 5 is set, and we are in OFDM mode, unset bit 5 and set bit - * 7 */ cs->control = 0; @@ -607,17 +755,18 @@ static void cs_set_control(struct zd_mac *mac, struct zd_ctrlset *cs, if (stype == IEEE80211_STYPE_PSPOLL) cs->control |= ZD_CS_PS_POLL_FRAME; + /* Unicast data frames over the threshold should have RTS */ if (!is_multicast_ether_addr(header->addr1) && - ftype != IEEE80211_FTYPE_MGMT && - tx_length > zd_netdev_ieee80211(mac->netdev)->rts) - { - /* FIXME: check the logic */ - if (ZD_CS_TYPE(cs->modulation) == ZD_CS_OFDM) { - /* 802.11g */ - cs->control |= ZD_CS_SELF_CTS; - } else { /* 802.11b */ - cs->control |= ZD_CS_RTS; - } + ftype != IEEE80211_FTYPE_MGMT && + tx_length > zd_netdev_ieee80211(mac->netdev)->rts) + cs->control |= ZD_CS_RTS; + + /* Use CTS-to-self protection if required */ + if (ZD_CS_TYPE(cs->modulation) == ZD_CS_OFDM && + ieee80211softmac_protection_needed(softmac)) { + /* FIXME: avoid sending RTS *and* self-CTS, is that correct? */ + cs->control &= ~ZD_CS_RTS; + cs->control |= ZD_CS_SELF_CTS; } /* FIXME: Management frame? */ @@ -721,7 +870,7 @@ struct zd_rt_hdr { u8 rt_rate; u16 rt_channel; u16 rt_chbitmask; -}; +} __attribute__((packed)); static void fill_rt_header(void *buffer, struct zd_mac *mac, const struct ieee80211_rx_stats *stats, @@ -782,9 +931,11 @@ static int is_data_packet_for_us(struct ieee80211_device *ieee, (netdev->flags & IFF_PROMISC); } -/* Filters receiving packets. If it returns 1 send it to ieee80211_rx, if 0 - * return. If an error is detected -EINVAL is returned. ieee80211_rx_mgt() is - * called here. +/* Filters received packets. The function returns 1 if the packet should be + * forwarded to ieee80211_rx(). If the packet should be ignored the function + * returns 0. If an invalid packet is found the function returns -EINVAL. + * + * The function calls ieee80211_rx_mgt() directly. * * It has been based on ieee80211_rx_any. */ @@ -810,9 +961,9 @@ static int filter_rx(struct ieee80211_device *ieee, ieee80211_rx_mgt(ieee, hdr, stats); return 0; case IEEE80211_FTYPE_CTL: - /* Ignore invalid short buffers */ return 0; case IEEE80211_FTYPE_DATA: + /* Ignore invalid short buffers */ if (length < sizeof(struct ieee80211_hdr_3addr)) return -EINVAL; return is_data_packet_for_us(ieee, hdr); @@ -993,6 +1144,7 @@ static void ieee_init(struct ieee80211_device *ieee) static void softmac_init(struct ieee80211softmac_device *sm) { sm->set_channel = set_channel; + sm->bssinfo_change = bssinfo_change; } struct iw_statistics *zd_mac_get_wireless_stats(struct net_device *ndev) @@ -1028,66 +1180,6 @@ struct iw_statistics *zd_mac_get_wireless_stats(struct net_device *ndev) return iw_stats; } -#ifdef DEBUG -static const char* decryption_types[] = { - [ZD_RX_NO_WEP] = "none", - [ZD_RX_WEP64] = "WEP64", - [ZD_RX_TKIP] = "TKIP", - [ZD_RX_AES] = "AES", - [ZD_RX_WEP128] = "WEP128", - [ZD_RX_WEP256] = "WEP256", -}; - -static const char *decryption_type_string(u8 type) -{ - const char *s; - - if (type < ARRAY_SIZE(decryption_types)) { - s = decryption_types[type]; - } else { - s = NULL; - } - return s ? s : "unknown"; -} - -static int is_ofdm(u8 frame_status) -{ - return (frame_status & ZD_RX_OFDM); -} - -void zd_dump_rx_status(const struct rx_status *status) -{ - const char* modulation; - u8 quality; - - if (is_ofdm(status->frame_status)) { - modulation = "ofdm"; - quality = status->signal_quality_ofdm; - } else { - modulation = "cck"; - quality = status->signal_quality_cck; - } - pr_debug("rx status %s strength %#04x qual %#04x decryption %s\n", - modulation, status->signal_strength, quality, - decryption_type_string(status->decryption_type)); - if (status->frame_status & ZD_RX_ERROR) { - pr_debug("rx error %s%s%s%s%s%s\n", - (status->frame_status & ZD_RX_TIMEOUT_ERROR) ? - "timeout " : "", - (status->frame_status & ZD_RX_FIFO_OVERRUN_ERROR) ? - "fifo " : "", - (status->frame_status & ZD_RX_DECRYPTION_ERROR) ? - "decryption " : "", - (status->frame_status & ZD_RX_CRC32_ERROR) ? - "crc32 " : "", - (status->frame_status & ZD_RX_NO_ADDR1_MATCH_ERROR) ? - "addr1 " : "", - (status->frame_status & ZD_RX_CRC16_ERROR) ? - "crc16" : ""); - } -} -#endif /* DEBUG */ - #define LINK_LED_WORK_DELAY HZ static void link_led_handler(struct work_struct *work) diff --git a/drivers/net/wireless/zd1211rw/zd_mac.h b/drivers/net/wireless/zd1211rw/zd_mac.h index 7957cac3de2..08d6b8c08e7 100644 --- a/drivers/net/wireless/zd1211rw/zd_mac.h +++ b/drivers/net/wireless/zd1211rw/zd_mac.h @@ -20,6 +20,7 @@ #include <linux/wireless.h> #include <linux/kernel.h> +#include <linux/workqueue.h> #include <net/ieee80211.h> #include <net/ieee80211softmac.h> @@ -48,10 +49,11 @@ struct zd_ctrlset { #define ZD_CS_CCK 0x00 #define ZD_CS_OFDM 0x10 -#define ZD_CS_CCK_RATE_1M 0x00 -#define ZD_CS_CCK_RATE_2M 0x01 -#define ZD_CS_CCK_RATE_5_5M 0x02 -#define ZD_CS_CCK_RATE_11M 0x03 +/* These are referred to as zd_rates */ +#define ZD_CCK_RATE_1M 0x00 +#define ZD_CCK_RATE_2M 0x01 +#define ZD_CCK_RATE_5_5M 0x02 +#define ZD_CCK_RATE_11M 0x03 /* The rates for OFDM are encoded as in the PLCP header. Use ZD_OFDM_RATE_*. */ @@ -82,7 +84,7 @@ struct zd_ctrlset { struct rx_length_info { __le16 length[3]; __le16 tag; -}; +} __attribute__((packed)); #define RX_LENGTH_INFO_TAG 0x697e @@ -93,7 +95,7 @@ struct rx_status { u8 signal_quality_ofdm; u8 decryption_type; u8 frame_status; -}; +} __attribute__((packed)); /* rx_status field decryption_type */ #define ZD_RX_NO_WEP 0 @@ -116,10 +118,6 @@ struct rx_status { #define ZD_RX_CRC16_ERROR 0x40 #define ZD_RX_ERROR 0x80 -enum mac_flags { - MAC_FIXED_CHANNEL = 0x01, -}; - struct housekeeping { struct delayed_work link_led_work; }; @@ -130,15 +128,33 @@ struct zd_mac { struct zd_chip chip; spinlock_t lock; struct net_device *netdev; + /* Unlocked reading possible */ struct iw_statistics iw_stats; + struct housekeeping housekeeping; + struct work_struct set_rts_cts_work; + struct work_struct set_basic_rates_work; + unsigned int stats_count; u8 qual_buffer[ZD_MAC_STATS_BUFFER_SIZE]; u8 rssi_buffer[ZD_MAC_STATS_BUFFER_SIZE]; u8 regdomain; u8 default_regdomain; u8 requested_channel; + + /* A bitpattern of cr_rates */ + u16 basic_rates; + + /* A zd_rate */ + u8 rts_rate; + + /* Short preamble (used for RTS/CTS) */ + unsigned int short_preamble:1; + + /* flags to indicate update in progress */ + unsigned int updating_rts_rate:1; + unsigned int updating_basic_rates:1; }; static inline struct ieee80211_device *zd_mac_to_ieee80211(struct zd_mac *mac) @@ -180,7 +196,7 @@ int zd_mac_set_regdomain(struct zd_mac *zd_mac, u8 regdomain); u8 zd_mac_get_regdomain(struct zd_mac *zd_mac); int zd_mac_request_channel(struct zd_mac *mac, u8 channel); -int zd_mac_get_channel(struct zd_mac *mac, u8 *channel, u8 *flags); +u8 zd_mac_get_channel(struct zd_mac *mac); int zd_mac_set_mode(struct zd_mac *mac, u32 mode); int zd_mac_get_mode(struct zd_mac *mac, u32 *mode); diff --git a/drivers/net/wireless/zd1211rw/zd_netdev.c b/drivers/net/wireless/zd1211rw/zd_netdev.c index af3a7b36d07..60f1b0f6d45 100644 --- a/drivers/net/wireless/zd1211rw/zd_netdev.c +++ b/drivers/net/wireless/zd1211rw/zd_netdev.c @@ -107,21 +107,10 @@ static int iw_get_freq(struct net_device *netdev, struct iw_request_info *info, union iwreq_data *req, char *extra) { - int r; struct zd_mac *mac = zd_netdev_mac(netdev); struct iw_freq *freq = &req->freq; - u8 channel; - u8 flags; - - r = zd_mac_get_channel(mac, &channel, &flags); - if (r) - return r; - freq->flags = (flags & MAC_FIXED_CHANNEL) ? - IW_FREQ_FIXED : IW_FREQ_AUTO; - dev_dbg_f(zd_mac_dev(mac), "channel %s\n", - (flags & MAC_FIXED_CHANNEL) ? "fixed" : "auto"); - return zd_channel_to_freq(freq, channel); + return zd_channel_to_freq(freq, zd_mac_get_channel(mac)); } static int iw_set_mode(struct net_device *netdev, diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c index 3faaeb2b7c8..aa782e88754 100644 --- a/drivers/net/wireless/zd1211rw/zd_usb.c +++ b/drivers/net/wireless/zd1211rw/zd_usb.c @@ -47,11 +47,17 @@ static struct usb_device_id usb_ids[] = { { USB_DEVICE(0x0586, 0x3402), .driver_info = DEVICE_ZD1211 }, { USB_DEVICE(0x0b3b, 0x5630), .driver_info = DEVICE_ZD1211 }, { USB_DEVICE(0x0b05, 0x170c), .driver_info = DEVICE_ZD1211 }, + { USB_DEVICE(0x1435, 0x0711), .driver_info = DEVICE_ZD1211 }, + { USB_DEVICE(0x0586, 0x3409), .driver_info = DEVICE_ZD1211 }, + { USB_DEVICE(0x0b3b, 0x1630), .driver_info = DEVICE_ZD1211 }, + { USB_DEVICE(0x0586, 0x3401), .driver_info = DEVICE_ZD1211 }, + { USB_DEVICE(0x14ea, 0xab13), .driver_info = DEVICE_ZD1211 }, /* ZD1211B */ { USB_DEVICE(0x0ace, 0x1215), .driver_info = DEVICE_ZD1211B }, { USB_DEVICE(0x157e, 0x300d), .driver_info = DEVICE_ZD1211B }, { USB_DEVICE(0x079b, 0x0062), .driver_info = DEVICE_ZD1211B }, { USB_DEVICE(0x1582, 0x6003), .driver_info = DEVICE_ZD1211B }, + { USB_DEVICE(0x050d, 0x705c), .driver_info = DEVICE_ZD1211B }, /* "Driverless" devices that need ejecting */ { USB_DEVICE(0x0ace, 0x2011), .driver_info = DEVICE_INSTALLER }, {} @@ -366,15 +372,6 @@ error: return r; } -static void disable_read_regs_int(struct zd_usb *usb) -{ - struct zd_usb_interrupt *intr = &usb->intr; - - spin_lock(&intr->lock); - intr->read_regs_enabled = 0; - spin_unlock(&intr->lock); -} - #define urb_dev(urb) (&(urb)->dev->dev) static inline void handle_regs_int(struct urb *urb) @@ -596,6 +593,8 @@ static void handle_rx_packet(struct zd_usb *usb, const u8 *buffer, unsigned int l, k, n; for (i = 0, l = 0;; i++) { k = le16_to_cpu(get_unaligned(&length_info->length[i])); + if (k == 0) + return; n = l+k; if (n > length) return; @@ -1119,27 +1118,28 @@ static int __init usb_init(void) { int r; - pr_debug("usb_init()\n"); + pr_debug("%s usb_init()\n", driver.name); zd_workqueue = create_singlethread_workqueue(driver.name); if (zd_workqueue == NULL) { - printk(KERN_ERR "%s: couldn't create workqueue\n", driver.name); + printk(KERN_ERR "%s couldn't create workqueue\n", driver.name); return -ENOMEM; } r = usb_register(&driver); if (r) { - printk(KERN_ERR "usb_register() failed. Error number %d\n", r); + printk(KERN_ERR "%s usb_register() failed. Error number %d\n", + driver.name, r); return r; } - pr_debug("zd1211rw initialized\n"); + pr_debug("%s initialized\n", driver.name); return 0; } static void __exit usb_exit(void) { - pr_debug("usb_exit()\n"); + pr_debug("%s usb_exit()\n", driver.name); usb_deregister(&driver); destroy_workqueue(zd_workqueue); } @@ -1156,10 +1156,19 @@ static void prepare_read_regs_int(struct zd_usb *usb) { struct zd_usb_interrupt *intr = &usb->intr; - spin_lock(&intr->lock); + spin_lock_irq(&intr->lock); intr->read_regs_enabled = 1; INIT_COMPLETION(intr->read_regs.completion); - spin_unlock(&intr->lock); + spin_unlock_irq(&intr->lock); +} + +static void disable_read_regs_int(struct zd_usb *usb) +{ + struct zd_usb_interrupt *intr = &usb->intr; + + spin_lock_irq(&intr->lock); + intr->read_regs_enabled = 0; + spin_unlock_irq(&intr->lock); } static int get_results(struct zd_usb *usb, u16 *values, @@ -1171,7 +1180,7 @@ static int get_results(struct zd_usb *usb, u16 *values, struct read_regs_int *rr = &intr->read_regs; struct usb_int_regs *regs = (struct usb_int_regs *)rr->buffer; - spin_lock(&intr->lock); + spin_lock_irq(&intr->lock); r = -EIO; /* The created block size seems to be larger than expected. @@ -1204,7 +1213,7 @@ static int get_results(struct zd_usb *usb, u16 *values, r = 0; error_unlock: - spin_unlock(&intr->lock); + spin_unlock_irq(&intr->lock); return r; } diff --git a/drivers/net/wireless/zd1211rw/zd_usb.h b/drivers/net/wireless/zd1211rw/zd_usb.h index e81a2d3cfff..317d37c3667 100644 --- a/drivers/net/wireless/zd1211rw/zd_usb.h +++ b/drivers/net/wireless/zd1211rw/zd_usb.h @@ -74,17 +74,17 @@ enum control_requests { struct usb_req_read_regs { __le16 id; __le16 addr[0]; -}; +} __attribute__((packed)); struct reg_data { __le16 addr; __le16 value; -}; +} __attribute__((packed)); struct usb_req_write_regs { __le16 id; struct reg_data reg_writes[0]; -}; +} __attribute__((packed)); enum { RF_IF_LE = 0x02, @@ -101,7 +101,7 @@ struct usb_req_rfwrite { /* RF2595: 24 */ __le16 bit_values[0]; /* (CR203 & ~(RF_IF_LE | RF_CLK | RF_DATA)) | (bit ? RF_DATA : 0) */ -}; +} __attribute__((packed)); /* USB interrupt */ @@ -118,12 +118,12 @@ enum usb_int_flags { struct usb_int_header { u8 type; /* must always be 1 */ u8 id; -}; +} __attribute__((packed)); struct usb_int_regs { struct usb_int_header hdr; struct reg_data regs[0]; -}; +} __attribute__((packed)); struct usb_int_retry_fail { struct usb_int_header hdr; @@ -131,7 +131,7 @@ struct usb_int_retry_fail { u8 _dummy; u8 addr[ETH_ALEN]; u8 ibss_wakeup_dest; -}; +} __attribute__((packed)); struct read_regs_int { struct completion completion; diff --git a/drivers/net/zorro8390.c b/drivers/net/zorro8390.c index df04e050c64..d85e2ea0b6a 100644 --- a/drivers/net/zorro8390.c +++ b/drivers/net/zorro8390.c @@ -34,8 +34,16 @@ #include <asm/amigaints.h> #include <asm/amigahw.h> -#include "8390.h" +#define EI_SHIFT(x) (ei_local->reg_offset[x]) +#define ei_inb(port) in_8(port) +#define ei_outb(val,port) out_8(port,val) +#define ei_inb_p(port) in_8(port) +#define ei_outb_p(val,port) out_8(port,val) +static const char version[] = + "8390.c:v1.10cvs 9/23/94 Donald Becker (becker@cesdis.gsfc.nasa.gov)\n"; + +#include "lib8390.c" #define DRV_NAME "zorro8390" @@ -114,7 +122,7 @@ static int __devinit zorro8390_init_one(struct zorro_dev *z, break; board = z->resource.start; ioaddr = board+cards[i].offset; - dev = alloc_ei_netdev(); + dev = ____alloc_ei_netdev(0); if (!dev) return -ENOMEM; SET_MODULE_OWNER(dev); @@ -201,7 +209,7 @@ static int __devinit zorro8390_init(struct net_device *dev, dev->irq = IRQ_AMIGA_PORTS; /* Install the Interrupt handler */ - i = request_irq(IRQ_AMIGA_PORTS, ei_interrupt, IRQF_SHARED, DRV_NAME, dev); + i = request_irq(IRQ_AMIGA_PORTS, __ei_interrupt, IRQF_SHARED, DRV_NAME, dev); if (i) return i; for(i = 0; i < ETHER_ADDR_LEN; i++) { @@ -226,10 +234,10 @@ static int __devinit zorro8390_init(struct net_device *dev, dev->open = &zorro8390_open; dev->stop = &zorro8390_close; #ifdef CONFIG_NET_POLL_CONTROLLER - dev->poll_controller = ei_poll; + dev->poll_controller = __ei_poll; #endif - NS8390_init(dev, 0); + __NS8390_init(dev, 0); err = register_netdev(dev); if (err) { free_irq(IRQ_AMIGA_PORTS, dev); @@ -246,7 +254,7 @@ static int __devinit zorro8390_init(struct net_device *dev, static int zorro8390_open(struct net_device *dev) { - ei_open(dev); + __ei_open(dev); return 0; } @@ -254,7 +262,7 @@ static int zorro8390_close(struct net_device *dev) { if (ei_debug > 1) printk(KERN_DEBUG "%s: Shutting down ethercard.\n", dev->name); - ei_close(dev); + __ei_close(dev); return 0; } @@ -405,7 +413,7 @@ static void zorro8390_block_output(struct net_device *dev, int count, printk(KERN_ERR "%s: timeout waiting for Tx RDC.\n", dev->name); zorro8390_reset_8390(dev); - NS8390_init(dev,1); + __NS8390_init(dev,1); break; } diff --git a/drivers/parisc/ccio-dma.c b/drivers/parisc/ccio-dma.c index 68cb3a08005..fe3f5f5365c 100644 --- a/drivers/parisc/ccio-dma.c +++ b/drivers/parisc/ccio-dma.c @@ -486,7 +486,7 @@ typedef unsigned long space_t; ** This bit tells U2 to do R/M/W for partial cachelines. "Streaming" ** data can avoid this if the mapping covers full cache lines. ** o STOP_MOST is needed for atomicity across cachelines. -** Apperently only "some EISA devices" need this. +** Apparently only "some EISA devices" need this. ** Using CONFIG_ISA is hack. Only the IOA with EISA under it needs ** to use this hint iff the EISA devices needs this feature. ** According to the U2 ERS, STOP_MOST enabled pages hurt performance. diff --git a/drivers/parisc/iosapic.c b/drivers/parisc/iosapic.c index c2949b4367e..12bab64a62a 100644 --- a/drivers/parisc/iosapic.c +++ b/drivers/parisc/iosapic.c @@ -50,12 +50,12 @@ ** ** PA Firmware ** ----------- -** PA-RISC platforms have two fundementally different types of firmware. +** PA-RISC platforms have two fundamentally different types of firmware. ** For PCI devices, "Legacy" PDC initializes the "INTERRUPT_LINE" register ** and BARs similar to a traditional PC BIOS. ** The newer "PAT" firmware supports PDC calls which return tables. -** PAT firmware only initializes PCI Console and Boot interface. -** With these tables, the OS can progam all other PCI devices. +** PAT firmware only initializes the PCI Console and Boot interface. +** With these tables, the OS can program all other PCI devices. ** ** One such PAT PDC call returns the "Interrupt Routing Table" (IRT). ** The IRT maps each PCI slot's INTA-D "output" line to an I/O SAPIC diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig index 5f1b9f58070..f1dd81a1d59 100644 --- a/drivers/pci/Kconfig +++ b/drivers/pci/Kconfig @@ -19,7 +19,7 @@ config PCI_MSI config PCI_MULTITHREAD_PROBE bool "PCI Multi-threaded probe (EXPERIMENTAL)" - depends on PCI && EXPERIMENTAL && BROKEN + depends on PCI && EXPERIMENTAL help Say Y here if you want the PCI core to spawn a new thread for every PCI device that is probed. This can cause a huge @@ -27,14 +27,14 @@ config PCI_MULTITHREAD_PROBE smaller speedup on single processor machines. But it can also cause lots of bad things to happen. A number - of PCI drivers can not properly handle running in this way, + of PCI drivers cannot properly handle running in this way, some will just not work properly at all, while others might decide to blow up power supplies with a huge load all at once, so use this option at your own risk. It is very unwise to use this option if you are not using a boot process that can handle devices being created in any - order. A program that can create persistant block and network + order. A program that can create persistent block and network device names (like udev) is a good idea if you wish to use this option. diff --git a/drivers/pci/access.c b/drivers/pci/access.c index ea16805a153..73a58c73d52 100644 --- a/drivers/pci/access.c +++ b/drivers/pci/access.c @@ -1,6 +1,7 @@ #include <linux/pci.h> #include <linux/module.h> #include <linux/ioport.h> +#include <linux/wait.h> #include "pci.h" @@ -63,30 +64,42 @@ EXPORT_SYMBOL(pci_bus_write_config_byte); EXPORT_SYMBOL(pci_bus_write_config_word); EXPORT_SYMBOL(pci_bus_write_config_dword); -static u32 pci_user_cached_config(struct pci_dev *dev, int pos) -{ - u32 data; +/* + * The following routines are to prevent the user from accessing PCI config + * space when it's unsafe to do so. Some devices require this during BIST and + * we're required to prevent it during D-state transitions. + * + * We have a bit per device to indicate it's blocked and a global wait queue + * for callers to sleep on until devices are unblocked. + */ +static DECLARE_WAIT_QUEUE_HEAD(pci_ucfg_wait); - data = dev->saved_config_space[pos/sizeof(dev->saved_config_space[0])]; - data >>= (pos % sizeof(dev->saved_config_space[0])) * 8; - return data; +static noinline void pci_wait_ucfg(struct pci_dev *dev) +{ + DECLARE_WAITQUEUE(wait, current); + + __add_wait_queue(&pci_ucfg_wait, &wait); + do { + set_current_state(TASK_UNINTERRUPTIBLE); + spin_unlock_irq(&pci_lock); + schedule(); + spin_lock_irq(&pci_lock); + } while (dev->block_ucfg_access); + __remove_wait_queue(&pci_ucfg_wait, &wait); } #define PCI_USER_READ_CONFIG(size,type) \ int pci_user_read_config_##size \ (struct pci_dev *dev, int pos, type *val) \ { \ - unsigned long flags; \ int ret = 0; \ u32 data = -1; \ if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER; \ - spin_lock_irqsave(&pci_lock, flags); \ - if (likely(!dev->block_ucfg_access)) \ - ret = dev->bus->ops->read(dev->bus, dev->devfn, \ + spin_lock_irq(&pci_lock); \ + if (unlikely(dev->block_ucfg_access)) pci_wait_ucfg(dev); \ + ret = dev->bus->ops->read(dev->bus, dev->devfn, \ pos, sizeof(type), &data); \ - else if (pos < sizeof(dev->saved_config_space)) \ - data = pci_user_cached_config(dev, pos); \ - spin_unlock_irqrestore(&pci_lock, flags); \ + spin_unlock_irq(&pci_lock); \ *val = (type)data; \ return ret; \ } @@ -95,14 +108,13 @@ int pci_user_read_config_##size \ int pci_user_write_config_##size \ (struct pci_dev *dev, int pos, type val) \ { \ - unsigned long flags; \ int ret = -EIO; \ if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER; \ - spin_lock_irqsave(&pci_lock, flags); \ - if (likely(!dev->block_ucfg_access)) \ - ret = dev->bus->ops->write(dev->bus, dev->devfn, \ + spin_lock_irq(&pci_lock); \ + if (unlikely(dev->block_ucfg_access)) pci_wait_ucfg(dev); \ + ret = dev->bus->ops->write(dev->bus, dev->devfn, \ pos, sizeof(type), val); \ - spin_unlock_irqrestore(&pci_lock, flags); \ + spin_unlock_irq(&pci_lock); \ return ret; \ } @@ -117,21 +129,23 @@ PCI_USER_WRITE_CONFIG(dword, u32) * pci_block_user_cfg_access - Block userspace PCI config reads/writes * @dev: pci device struct * - * This function blocks any userspace PCI config accesses from occurring. - * When blocked, any writes will be bit bucketed and reads will return the - * data saved using pci_save_state for the first 64 bytes of config - * space and return 0xff for all other config reads. - **/ + * When user access is blocked, any reads or writes to config space will + * sleep until access is unblocked again. We don't allow nesting of + * block/unblock calls. + */ void pci_block_user_cfg_access(struct pci_dev *dev) { unsigned long flags; + int was_blocked; - pci_save_state(dev); - - /* spinlock to synchronize with anyone reading config space now */ spin_lock_irqsave(&pci_lock, flags); + was_blocked = dev->block_ucfg_access; dev->block_ucfg_access = 1; spin_unlock_irqrestore(&pci_lock, flags); + + /* If we BUG() inside the pci_lock, we're guaranteed to hose + * the machine */ + BUG_ON(was_blocked); } EXPORT_SYMBOL_GPL(pci_block_user_cfg_access); @@ -140,14 +154,19 @@ EXPORT_SYMBOL_GPL(pci_block_user_cfg_access); * @dev: pci device struct * * This function allows userspace PCI config accesses to resume. - **/ + */ void pci_unblock_user_cfg_access(struct pci_dev *dev) { unsigned long flags; - /* spinlock to synchronize with anyone reading saved config space */ spin_lock_irqsave(&pci_lock, flags); + + /* This indicates a problem in the caller, but we don't need + * to kill them, unlike a double-block above. */ + WARN_ON(!dev->block_ucfg_access); + dev->block_ucfg_access = 0; + wake_up_all(&pci_ucfg_wait); spin_unlock_irqrestore(&pci_lock, flags); } EXPORT_SYMBOL_GPL(pci_unblock_user_cfg_access); diff --git a/drivers/pci/hotplug/acpiphp.h b/drivers/pci/hotplug/acpiphp.h index 59c5b242d86..ddbadd95387 100644 --- a/drivers/pci/hotplug/acpiphp.h +++ b/drivers/pci/hotplug/acpiphp.h @@ -62,10 +62,10 @@ struct acpiphp_slot; struct slot { struct hotplug_slot *hotplug_slot; struct acpiphp_slot *acpi_slot; + struct hotplug_slot_info info; + char name[SLOT_NAME_SIZE]; }; - - /** * struct acpiphp_bridge - PCI bridge information * diff --git a/drivers/pci/hotplug/acpiphp_core.c b/drivers/pci/hotplug/acpiphp_core.c index c57d9d5ce84..40c79b03c7e 100644 --- a/drivers/pci/hotplug/acpiphp_core.c +++ b/drivers/pci/hotplug/acpiphp_core.c @@ -303,25 +303,15 @@ static int __init init_acpi(void) /* read initial number of slots */ if (!retval) { num_slots = acpiphp_get_num_slots(); - if (num_slots == 0) + if (num_slots == 0) { + acpiphp_glue_exit(); retval = -ENODEV; + } } return retval; } - -/** - * make_slot_name - make a slot name that appears in pcihpfs - * @slot: slot to name - * - */ -static void make_slot_name(struct slot *slot) -{ - snprintf(slot->hotplug_slot->name, SLOT_NAME_SIZE, "%u", - slot->acpi_slot->sun); -} - /** * release_slot - free up the memory used by a slot * @hotplug_slot: slot to free @@ -332,8 +322,6 @@ static void release_slot(struct hotplug_slot *hotplug_slot) dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name); - kfree(slot->hotplug_slot->info); - kfree(slot->hotplug_slot->name); kfree(slot->hotplug_slot); kfree(slot); } @@ -342,26 +330,19 @@ static void release_slot(struct hotplug_slot *hotplug_slot) int acpiphp_register_hotplug_slot(struct acpiphp_slot *acpiphp_slot) { struct slot *slot; - struct hotplug_slot *hotplug_slot; - struct hotplug_slot_info *hotplug_slot_info; int retval = -ENOMEM; slot = kzalloc(sizeof(*slot), GFP_KERNEL); if (!slot) goto error; - slot->hotplug_slot = kzalloc(sizeof(*hotplug_slot), GFP_KERNEL); + slot->hotplug_slot = kzalloc(sizeof(*slot->hotplug_slot), GFP_KERNEL); if (!slot->hotplug_slot) goto error_slot; - slot->hotplug_slot->info = kzalloc(sizeof(*hotplug_slot_info), - GFP_KERNEL); - if (!slot->hotplug_slot->info) - goto error_hpslot; + slot->hotplug_slot->info = &slot->info; - slot->hotplug_slot->name = kzalloc(SLOT_NAME_SIZE, GFP_KERNEL); - if (!slot->hotplug_slot->name) - goto error_info; + slot->hotplug_slot->name = slot->name; slot->hotplug_slot->private = slot; slot->hotplug_slot->release = &release_slot; @@ -376,21 +357,17 @@ int acpiphp_register_hotplug_slot(struct acpiphp_slot *acpiphp_slot) slot->hotplug_slot->info->cur_bus_speed = PCI_SPEED_UNKNOWN; acpiphp_slot->slot = slot; - make_slot_name(slot); + snprintf(slot->name, sizeof(slot->name), "%u", slot->acpi_slot->sun); retval = pci_hp_register(slot->hotplug_slot); if (retval) { err("pci_hp_register failed with error %d\n", retval); - goto error_name; + goto error_hpslot; } info("Slot [%s] registered\n", slot->hotplug_slot->name); return 0; -error_name: - kfree(slot->hotplug_slot->name); -error_info: - kfree(slot->hotplug_slot->info); error_hpslot: kfree(slot->hotplug_slot); error_slot: diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c index 16167b01626..0b9d0db1590 100644 --- a/drivers/pci/hotplug/acpiphp_glue.c +++ b/drivers/pci/hotplug/acpiphp_glue.c @@ -1693,14 +1693,10 @@ void __exit acpiphp_glue_exit(void) */ int __init acpiphp_get_num_slots(void) { - struct list_head *node; struct acpiphp_bridge *bridge; - int num_slots; - - num_slots = 0; + int num_slots = 0; - list_for_each (node, &bridge_list) { - bridge = (struct acpiphp_bridge *)node; + list_for_each_entry (bridge, &bridge_list, list) { dbg("Bus %04x:%02x has %d slot%s\n", pci_domain_nr(bridge->pci_bus), bridge->pci_bus->number, bridge->nr_slots, diff --git a/drivers/pci/hotplug/ibmphp_hpc.c b/drivers/pci/hotplug/ibmphp_hpc.c index c3ac98a0a6a..f55ac3885cb 100644 --- a/drivers/pci/hotplug/ibmphp_hpc.c +++ b/drivers/pci/hotplug/ibmphp_hpc.c @@ -531,7 +531,7 @@ static u8 hpc_readcmdtoindex (u8 cmd, u8 index) * * Action: issue a READ command to HPC * -* Input: pslot - can not be NULL for READ_ALLSTAT +* Input: pslot - cannot be NULL for READ_ALLSTAT * pstatus - can be NULL for READ_ALLSTAT * * Return 0 or error codes diff --git a/drivers/pci/hotplug/ibmphp_pci.c b/drivers/pci/hotplug/ibmphp_pci.c index d87a9e3eaee..d8f05d7a3c7 100644 --- a/drivers/pci/hotplug/ibmphp_pci.c +++ b/drivers/pci/hotplug/ibmphp_pci.c @@ -1371,12 +1371,12 @@ static int unconfigure_boot_bridge (u8 busno, u8 device, u8 function) } bus = ibmphp_find_res_bus (sec_number); - debug ("bus->busno is %x\n", bus->busno); - debug ("sec_number is %x\n", sec_number); if (!bus) { err ("cannot find Bus structure for the bridged device\n"); return -EINVAL; } + debug("bus->busno is %x\n", bus->busno); + debug("sec_number is %x\n", sec_number); ibmphp_remove_bus (bus, busno); diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c index f93e81e2d2c..f13f31323e8 100644 --- a/drivers/pci/hotplug/pciehp_core.c +++ b/drivers/pci/hotplug/pciehp_core.c @@ -521,14 +521,9 @@ static void __exit unload_pciehpd(void) } -static int hpdriver_context = 0; - static void pciehp_remove (struct pcie_device *device) { - printk("%s ENTRY\n", __FUNCTION__); - printk("%s -> Call free_irq for irq = %d\n", - __FUNCTION__, device->irq); - free_irq(device->irq, &hpdriver_context); + /* XXX - Needs to be adapted to device driver model */ } #ifdef CONFIG_PM diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index 1c551c697c3..6d3f580f266 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -718,8 +718,6 @@ static void hpc_release_ctlr(struct controller *ctrl) if (php_ctlr->irq) { free_irq(php_ctlr->irq, ctrl); php_ctlr->irq = 0; - if (!pcie_mch_quirk) - pci_disable_msi(php_ctlr->pci_dev); } } if (php_ctlr->pci_dev) diff --git a/drivers/pci/hotplug/rpadlpar_core.c b/drivers/pci/hotplug/rpadlpar_core.c index 46825fee3ae..72383467a0d 100644 --- a/drivers/pci/hotplug/rpadlpar_core.c +++ b/drivers/pci/hotplug/rpadlpar_core.c @@ -63,7 +63,7 @@ static struct device_node *find_php_slot_pci_node(char *drc_name, char *type; int rc; - while ((np = of_find_node_by_type(np, "pci"))) { + while ((np = of_find_node_by_name(np, "pci"))) { rc = rpaphp_get_drc_props(np, NULL, &name, &type, NULL); if (rc == 0) if (!strcmp(drc_name, name) && !strcmp(drc_type, type)) diff --git a/drivers/pci/hotplug/rpaphp_core.c b/drivers/pci/hotplug/rpaphp_core.c index 141486df235..71a2cb8baa4 100644 --- a/drivers/pci/hotplug/rpaphp_core.c +++ b/drivers/pci/hotplug/rpaphp_core.c @@ -356,7 +356,7 @@ static int __init rpaphp_init(void) info(DRIVER_DESC " version: " DRIVER_VERSION "\n"); init_MUTEX(&rpaphp_sem); - while ((dn = of_find_node_by_type(dn, "pci"))) + while ((dn = of_find_node_by_name(dn, "pci"))) rpaphp_add_slot(dn); return 0; diff --git a/drivers/pci/hotplug/sgi_hotplug.c b/drivers/pci/hotplug/sgi_hotplug.c index b62ad31a973..5d188c55838 100644 --- a/drivers/pci/hotplug/sgi_hotplug.c +++ b/drivers/pci/hotplug/sgi_hotplug.c @@ -205,21 +205,6 @@ static struct hotplug_slot * sn_hp_destroy(void) return bss_hotplug_slot; } -static void sn_bus_alloc_data(struct pci_dev *dev) -{ - struct pci_bus *subordinate_bus; - struct pci_dev *child; - - sn_pci_fixup_slot(dev); - - /* Recursively sets up the sn_irq_info structs */ - if (dev->subordinate) { - subordinate_bus = dev->subordinate; - list_for_each_entry(child, &subordinate_bus->devices, bus_list) - sn_bus_alloc_data(child); - } -} - static void sn_bus_free_data(struct pci_dev *dev) { struct pci_bus *subordinate_bus; @@ -337,6 +322,11 @@ static int sn_slot_disable(struct hotplug_slot *bss_hotplug_slot, return rc; } +/* + * Power up and configure the slot via a SAL call to PROM. + * Scan slot (and any children), do any platform specific fixup, + * and find device driver. + */ static int enable_slot(struct hotplug_slot *bss_hotplug_slot) { struct slot *slot = bss_hotplug_slot->private; @@ -345,6 +335,7 @@ static int enable_slot(struct hotplug_slot *bss_hotplug_slot) int func, num_funcs; int new_ppb = 0; int rc; + void pcibios_fixup_device_resources(struct pci_dev *); /* Serialize the Linux PCI infrastructure */ mutex_lock(&sn_hotplug_mutex); @@ -367,9 +358,6 @@ static int enable_slot(struct hotplug_slot *bss_hotplug_slot) return -ENODEV; } - sn_pci_controller_fixup(pci_domain_nr(slot->pci_bus), - slot->pci_bus->number, - slot->pci_bus); /* * Map SN resources for all functions on the card * to the Linux PCI interface and tell the drivers @@ -380,6 +368,13 @@ static int enable_slot(struct hotplug_slot *bss_hotplug_slot) PCI_DEVFN(slot->device_num + 1, PCI_FUNC(func))); if (dev) { + /* Need to do slot fixup on PPB before fixup of children + * (PPB's pcidev_info needs to be in pcidev_info list + * before child's SN_PCIDEV_INFO() call to setup + * pdi_host_pcidev_info). + */ + pcibios_fixup_device_resources(dev); + sn_pci_fixup_slot(dev); if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) { unsigned char sec_bus; pci_read_config_byte(dev, PCI_SECONDARY_BUS, @@ -387,12 +382,8 @@ static int enable_slot(struct hotplug_slot *bss_hotplug_slot) new_bus = pci_add_new_bus(dev->bus, dev, sec_bus); pci_scan_child_bus(new_bus); - sn_pci_controller_fixup(pci_domain_nr(new_bus), - new_bus->number, - new_bus); new_ppb = 1; } - sn_bus_alloc_data(dev); pci_dev_put(dev); } } diff --git a/drivers/pci/msi.h b/drivers/pci/msi.h index f0cca1772f9..3898f523714 100644 --- a/drivers/pci/msi.h +++ b/drivers/pci/msi.h @@ -6,14 +6,6 @@ #ifndef MSI_H #define MSI_H -/* - * MSI-X Address Register - */ -#define PCI_MSIX_FLAGS_QSIZE 0x7FF -#define PCI_MSIX_FLAGS_ENABLE (1 << 15) -#define PCI_MSIX_FLAGS_BIRMASK (7 << 0) -#define PCI_MSIX_FLAGS_BITMASK (1 << 0) - #define PCI_MSIX_ENTRY_SIZE 16 #define PCI_MSIX_ENTRY_LOWER_ADDR_OFFSET 0 #define PCI_MSIX_ENTRY_UPPER_ADDR_OFFSET 4 diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c index bb7456c1dba..a064f36a080 100644 --- a/drivers/pci/pci-acpi.c +++ b/drivers/pci/pci-acpi.c @@ -36,6 +36,7 @@ acpi_query_osc ( struct acpi_buffer output = {ACPI_ALLOCATE_BUFFER, NULL}; union acpi_object *out_obj; u32 osc_dw0; + acpi_status *ret_status = (acpi_status *)retval; /* Setting up input parameters */ @@ -56,6 +57,7 @@ acpi_query_osc ( if (ACPI_FAILURE (status)) { printk(KERN_DEBUG "Evaluate _OSC Set fails. Status = 0x%04x\n", status); + *ret_status = status; return status; } out_obj = output.pointer; @@ -90,6 +92,7 @@ acpi_query_osc ( query_osc_out: kfree(output.pointer); + *ret_status = status; return status; } @@ -166,6 +169,7 @@ run_osc_out: acpi_status pci_osc_support_set(u32 flags) { u32 temp; + acpi_status retval; if (!(flags & OSC_SUPPORT_MASKS)) { return AE_TYPE; @@ -179,9 +183,13 @@ acpi_status pci_osc_support_set(u32 flags) acpi_get_devices ( PCI_ROOT_HID_STRING, acpi_query_osc, ctrlset_buf, - NULL ); + (void **) &retval ); ctrlset_buf[OSC_QUERY_TYPE] = !OSC_QUERY_ENABLE; ctrlset_buf[OSC_CONTROL_TYPE] = temp; + if (ACPI_FAILURE(retval)) { + /* no osc support at all */ + ctrlset_buf[OSC_SUPPORT_TYPE] = 0; + } return AE_OK; } EXPORT_SYMBOL(pci_osc_support_set); diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c index 194f1d21d3d..e5ae3a0c13b 100644 --- a/drivers/pci/pci-driver.c +++ b/drivers/pci/pci-driver.c @@ -329,8 +329,8 @@ static int pci_default_resume(struct pci_dev *pci_dev) /* restore the PCI config space */ pci_restore_state(pci_dev); /* if the device was enabled before suspend, reenable */ - if (pci_dev->is_enabled) - retval = pci_enable_device(pci_dev); + if (atomic_read(&pci_dev->enable_cnt)) + retval = __pci_enable_device(pci_dev); /* if the device was busmaster before the suspend, make it busmaster again */ if (pci_dev->is_busmaster) pci_set_master(pci_dev); @@ -445,9 +445,12 @@ int __pci_register_driver(struct pci_driver *drv, struct module *owner) /* register with core */ error = driver_register(&drv->driver); + if (error) + return error; - if (!error) - error = pci_create_newid_file(drv); + error = pci_create_newid_file(drv); + if (error) + driver_unregister(&drv->driver); return error; } diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c index f952bfea48a..7a94076752d 100644 --- a/drivers/pci/pci-sysfs.c +++ b/drivers/pci/pci-sysfs.c @@ -42,7 +42,6 @@ pci_config_attr(subsystem_vendor, "0x%04x\n"); pci_config_attr(subsystem_device, "0x%04x\n"); pci_config_attr(class, "0x%06x\n"); pci_config_attr(irq, "%u\n"); -pci_config_attr(is_enabled, "%u\n"); static ssize_t broken_parity_status_show(struct device *dev, struct device_attribute *attr, @@ -112,26 +111,36 @@ static ssize_t modalias_show(struct device *dev, struct device_attribute *attr, (u8)(pci_dev->class >> 16), (u8)(pci_dev->class >> 8), (u8)(pci_dev->class)); } -static ssize_t -is_enabled_store(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) + +static ssize_t is_enabled_store(struct device *dev, + struct device_attribute *attr, const char *buf, + size_t count) { + ssize_t result = -EINVAL; struct pci_dev *pdev = to_pci_dev(dev); - int retval = 0; /* this can crash the machine when done on the "wrong" device */ if (!capable(CAP_SYS_ADMIN)) return count; - if (*buf == '0') - pci_disable_device(pdev); + if (*buf == '0') { + if (atomic_read(&pdev->enable_cnt) != 0) + pci_disable_device(pdev); + else + result = -EIO; + } else if (*buf == '1') + result = pci_enable_device(pdev); + + return result < 0 ? result : count; +} - if (*buf == '1') - retval = pci_enable_device(pdev); +static ssize_t is_enabled_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct pci_dev *pdev; - if (retval) - return retval; - return count; + pdev = to_pci_dev (dev); + return sprintf (buf, "%u\n", atomic_read(&pdev->enable_cnt)); } static ssize_t diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index a544997399b..5a14b73cf3a 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -490,6 +490,47 @@ static void pci_restore_pcie_state(struct pci_dev *dev) kfree(save_state); } + +static int pci_save_pcix_state(struct pci_dev *dev) +{ + int pos, i = 0; + struct pci_cap_saved_state *save_state; + u16 *cap; + + pos = pci_find_capability(dev, PCI_CAP_ID_PCIX); + if (pos <= 0) + return 0; + + save_state = kzalloc(sizeof(*save_state) + sizeof(u16), GFP_KERNEL); + if (!save_state) { + dev_err(&dev->dev, "Out of memory in pci_save_pcie_state\n"); + return -ENOMEM; + } + cap = (u16 *)&save_state->data[0]; + + pci_read_config_word(dev, pos + PCI_X_CMD, &cap[i++]); + pci_add_saved_cap(dev, save_state); + return 0; +} + +static void pci_restore_pcix_state(struct pci_dev *dev) +{ + int i = 0, pos; + struct pci_cap_saved_state *save_state; + u16 *cap; + + save_state = pci_find_saved_cap(dev, PCI_CAP_ID_PCIX); + pos = pci_find_capability(dev, PCI_CAP_ID_PCIX); + if (!save_state || pos <= 0) + return; + cap = (u16 *)&save_state->data[0]; + + pci_write_config_word(dev, pos + PCI_X_CMD, cap[i++]); + pci_remove_saved_cap(save_state); + kfree(save_state); +} + + /** * pci_save_state - save the PCI configuration space of a device before suspending * @dev: - PCI device that we're dealing with @@ -507,6 +548,8 @@ pci_save_state(struct pci_dev *dev) return i; if ((i = pci_save_pcie_state(dev)) != 0) return i; + if ((i = pci_save_pcix_state(dev)) != 0) + return i; return 0; } @@ -538,6 +581,7 @@ pci_restore_state(struct pci_dev *dev) dev->saved_config_space[i]); } } + pci_restore_pcix_state(dev); pci_restore_msi_state(dev); pci_restore_msix_state(dev); return 0; @@ -568,30 +612,51 @@ pci_enable_device_bars(struct pci_dev *dev, int bars) } /** - * pci_enable_device - Initialize device before it's used by a driver. + * __pci_enable_device - Initialize device before it's used by a driver. * @dev: PCI device to be initialized * * Initialize device before it's used by a driver. Ask low-level code * to enable I/O and memory. Wake up the device if it was suspended. * Beware, this function can fail. + * + * Note this function is a backend and is not supposed to be called by + * normal code, use pci_enable_device() instead. */ int -pci_enable_device(struct pci_dev *dev) +__pci_enable_device(struct pci_dev *dev) { int err; - if (dev->is_enabled) - return 0; - err = pci_enable_device_bars(dev, (1 << PCI_NUM_RESOURCES) - 1); if (err) return err; pci_fixup_device(pci_fixup_enable, dev); - dev->is_enabled = 1; return 0; } /** + * pci_enable_device - Initialize device before it's used by a driver. + * @dev: PCI device to be initialized + * + * Initialize device before it's used by a driver. Ask low-level code + * to enable I/O and memory. Wake up the device if it was suspended. + * Beware, this function can fail. + * + * Note we don't actually enable the device many times if we call + * this function repeatedly (we just increment the count). + */ +int pci_enable_device(struct pci_dev *dev) +{ + int result; + if (atomic_add_return(1, &dev->enable_cnt) > 1) + return 0; /* already enabled */ + result = __pci_enable_device(dev); + if (result < 0) + atomic_dec(&dev->enable_cnt); + return result; +} + +/** * pcibios_disable_device - disable arch specific PCI resources for device dev * @dev: the PCI device to disable * @@ -607,12 +672,18 @@ void __attribute__ ((weak)) pcibios_disable_device (struct pci_dev *dev) {} * * Signal to the system that the PCI device is not in use by the system * anymore. This only involves disabling PCI bus-mastering, if active. + * + * Note we don't actually disable the device until all callers of + * pci_device_enable() have called pci_device_disable(). */ void pci_disable_device(struct pci_dev *dev) { u16 pci_command; + if (atomic_sub_return(1, &dev->enable_cnt) != 0) + return; + if (dev->msi_enabled) disable_msi_mode(dev, pci_find_capability(dev, PCI_CAP_ID_MSI), PCI_CAP_ID_MSI); @@ -628,7 +699,6 @@ pci_disable_device(struct pci_dev *dev) dev->is_busmaster = 0; pcibios_disable_device(dev); - dev->is_enabled = 0; } /** @@ -831,22 +901,38 @@ pci_set_master(struct pci_dev *dev) pcibios_set_master(dev); } -#ifndef HAVE_ARCH_PCI_MWI +#ifdef PCI_DISABLE_MWI +int pci_set_mwi(struct pci_dev *dev) +{ + return 0; +} + +void pci_clear_mwi(struct pci_dev *dev) +{ +} + +#else + +#ifndef PCI_CACHE_LINE_BYTES +#define PCI_CACHE_LINE_BYTES L1_CACHE_BYTES +#endif + /* This can be overridden by arch code. */ -u8 pci_cache_line_size = L1_CACHE_BYTES >> 2; +/* Don't forget this is measured in 32-bit words, not bytes */ +u8 pci_cache_line_size = PCI_CACHE_LINE_BYTES / 4; /** - * pci_generic_prep_mwi - helper function for pci_set_mwi - * @dev: the PCI device for which MWI is enabled + * pci_set_cacheline_size - ensure the CACHE_LINE_SIZE register is programmed + * @dev: the PCI device for which MWI is to be enabled * - * Helper function for generic implementation of pcibios_prep_mwi - * function. Originally copied from drivers/net/acenic.c. + * Helper function for pci_set_mwi. + * Originally copied from drivers/net/acenic.c. * Copyright 1998-2001 by Jes Sorensen, <jes@trained-monkey.org>. * * RETURNS: An appropriate -ERRNO error value on error, or zero for success. */ static int -pci_generic_prep_mwi(struct pci_dev *dev) +pci_set_cacheline_size(struct pci_dev *dev) { u8 cacheline_size; @@ -872,7 +958,6 @@ pci_generic_prep_mwi(struct pci_dev *dev) return -EINVAL; } -#endif /* !HAVE_ARCH_PCI_MWI */ /** * pci_set_mwi - enables memory-write-invalidate PCI transaction @@ -890,12 +975,7 @@ pci_set_mwi(struct pci_dev *dev) int rc; u16 cmd; -#ifdef HAVE_ARCH_PCI_MWI - rc = pcibios_prep_mwi(dev); -#else - rc = pci_generic_prep_mwi(dev); -#endif - + rc = pci_set_cacheline_size(dev); if (rc) return rc; @@ -926,6 +1006,7 @@ pci_clear_mwi(struct pci_dev *dev) pci_write_config_word(dev, PCI_COMMAND, cmd); } } +#endif /* ! PCI_DISABLE_MWI */ /** * pci_intx - enables/disables PCI INTx for device dev diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h index 6bf327db5c5..398852f526a 100644 --- a/drivers/pci/pci.h +++ b/drivers/pci/pci.h @@ -1,5 +1,6 @@ /* Functions internal to the PCI core code */ +extern int __must_check __pci_enable_device(struct pci_dev *); extern int pci_uevent(struct device *dev, char **envp, int num_envp, char *buffer, int buffer_size); extern int pci_create_sysfs_dev_files(struct pci_dev *pdev); diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index e159d660449..0eeac60042b 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -679,6 +679,33 @@ static int pci_setup_device(struct pci_dev * dev) pci_read_bases(dev, 6, PCI_ROM_ADDRESS); pci_read_config_word(dev, PCI_SUBSYSTEM_VENDOR_ID, &dev->subsystem_vendor); pci_read_config_word(dev, PCI_SUBSYSTEM_ID, &dev->subsystem_device); + + /* + * Do the ugly legacy mode stuff here rather than broken chip + * quirk code. Legacy mode ATA controllers have fixed + * addresses. These are not always echoed in BAR0-3, and + * BAR0-3 in a few cases contain junk! + */ + if (class == PCI_CLASS_STORAGE_IDE) { + u8 progif; + pci_read_config_byte(dev, PCI_CLASS_PROG, &progif); + if ((progif & 1) == 0) { + dev->resource[0].start = 0x1F0; + dev->resource[0].end = 0x1F7; + dev->resource[0].flags = IORESOURCE_IO; + dev->resource[1].start = 0x3F6; + dev->resource[1].end = 0x3F6; + dev->resource[1].flags = IORESOURCE_IO; + } + if ((progif & 4) == 0) { + dev->resource[2].start = 0x170; + dev->resource[2].end = 0x177; + dev->resource[2].flags = IORESOURCE_IO; + dev->resource[3].start = 0x376; + dev->resource[3].end = 0x376; + dev->resource[3].flags = IORESOURCE_IO; + } + } break; case PCI_HEADER_TYPE_BRIDGE: /* bridge header */ diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 5b448381169..9ca9b9bf616 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -797,56 +797,6 @@ static void __init quirk_mediagx_master(struct pci_dev *dev) DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_PCI_MASTER, quirk_mediagx_master ); /* - * As per PCI spec, ignore base address registers 0-3 of the IDE controllers - * running in Compatible mode (bits 0 and 2 in the ProgIf for primary and - * secondary channels respectively). If the device reports Compatible mode - * but does use BAR0-3 for address decoding, we assume that firmware has - * programmed these BARs with standard values (0x1f0,0x3f4 and 0x170,0x374). - * Exceptions (if they exist) must be handled in chip/architecture specific - * fixups. - * - * Note: for non x86 people. You may need an arch specific quirk to handle - * moving IDE devices to native mode as well. Some plug in card devices power - * up in compatible mode and assume the BIOS will adjust them. - * - * Q: should we load the 0x1f0,0x3f4 into the registers or zap them as - * we do now ? We don't want is pci_enable_device to come along - * and assign new resources. Both approaches work for that. - */ -static void __devinit quirk_ide_bases(struct pci_dev *dev) -{ - struct resource *res; - int first_bar = 2, last_bar = 0; - - if ((dev->class >> 8) != PCI_CLASS_STORAGE_IDE) - return; - - res = &dev->resource[0]; - - /* primary channel: ProgIf bit 0, BAR0, BAR1 */ - if (!(dev->class & 1) && (res[0].flags || res[1].flags)) { - res[0].start = res[0].end = res[0].flags = 0; - res[1].start = res[1].end = res[1].flags = 0; - first_bar = 0; - last_bar = 1; - } - - /* secondary channel: ProgIf bit 2, BAR2, BAR3 */ - if (!(dev->class & 4) && (res[2].flags || res[3].flags)) { - res[2].start = res[2].end = res[2].flags = 0; - res[3].start = res[3].end = res[3].flags = 0; - last_bar = 3; - } - - if (!last_bar) - return; - - printk(KERN_INFO "PCI: Ignoring BAR%d-%d of IDE controller %s\n", - first_bar, last_bar, pci_name(dev)); -} -DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, quirk_ide_bases); - -/* * Ensure C0 rev restreaming is off. This is normally done by * the BIOS but in the odd case it is not the results are corruption * hence the presence of a Linux check @@ -880,11 +830,10 @@ static void __devinit quirk_svwks_csb5ide(struct pci_dev *pdev) prog &= ~5; pdev->class &= ~5; pci_write_config_byte(pdev, PCI_CLASS_PROG, prog); - /* need to re-assign BARs for compat mode */ - quirk_ide_bases(pdev); + /* PCI layer will sort out resources */ } } -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, quirk_svwks_csb5ide ); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, quirk_svwks_csb5ide ); /* * Intel 82801CAM ICH3-M datasheet says IDE modes must be the same @@ -900,11 +849,9 @@ static void __init quirk_ide_samemode(struct pci_dev *pdev) prog &= ~5; pdev->class &= ~5; pci_write_config_byte(pdev, PCI_CLASS_PROG, prog); - /* need to re-assign BARs for compat mode */ - quirk_ide_bases(pdev); } } -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_10, quirk_ide_samemode); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_10, quirk_ide_samemode); /* This was originally an Alpha specific thing, but it really fits here. * The i82375 PCI/EISA bridge appears as non-classified. Fix that. diff --git a/drivers/pci/rom.c b/drivers/pci/rom.c index e1dcefc69bb..d087e081771 100644 --- a/drivers/pci/rom.c +++ b/drivers/pci/rom.c @@ -81,7 +81,8 @@ void __iomem *pci_map_rom(struct pci_dev *pdev, size_t *size) start = (loff_t)0xC0000; *size = 0x20000; /* cover C000:0 through E000:0 */ } else { - if (res->flags & IORESOURCE_ROM_COPY) { + if (res->flags & + (IORESOURCE_ROM_COPY | IORESOURCE_ROM_BIOS_COPY)) { *size = pci_resource_len(pdev, PCI_ROM_RESOURCE); return (void __iomem *)(unsigned long) pci_resource_start(pdev, PCI_ROM_RESOURCE); @@ -165,7 +166,8 @@ void __iomem *pci_map_rom_copy(struct pci_dev *pdev, size_t *size) if (!rom) return NULL; - if (res->flags & (IORESOURCE_ROM_COPY | IORESOURCE_ROM_SHADOW)) + if (res->flags & (IORESOURCE_ROM_COPY | IORESOURCE_ROM_SHADOW | + IORESOURCE_ROM_BIOS_COPY)) return rom; res->start = (unsigned long)kmalloc(*size, GFP_KERNEL); @@ -191,7 +193,7 @@ void pci_unmap_rom(struct pci_dev *pdev, void __iomem *rom) { struct resource *res = &pdev->resource[PCI_ROM_RESOURCE]; - if (res->flags & IORESOURCE_ROM_COPY) + if (res->flags & (IORESOURCE_ROM_COPY | IORESOURCE_ROM_BIOS_COPY)) return; iounmap(rom); @@ -215,6 +217,7 @@ void pci_remove_rom(struct pci_dev *pdev) sysfs_remove_bin_file(&pdev->dev.kobj, pdev->rom_attr); if (!(res->flags & (IORESOURCE_ROM_ENABLE | IORESOURCE_ROM_SHADOW | + IORESOURCE_ROM_BIOS_COPY | IORESOURCE_ROM_COPY))) pci_disable_rom(pdev); } diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c index e469a46a388..ff14fd8f0cd 100644 --- a/drivers/pcmcia/ds.c +++ b/drivers/pcmcia/ds.c @@ -1273,7 +1273,9 @@ static void pcmcia_bus_remove_socket(struct class_device *class_dev, pccard_register_pcmcia(socket, NULL); /* unregister any unbound devices */ + mutex_lock(&socket->skt_mutex); pcmcia_card_remove(socket, NULL); + mutex_unlock(&socket->skt_mutex); pcmcia_put_socket(socket); diff --git a/drivers/rtc/interface.c b/drivers/rtc/interface.c index 579cd667b16..6f11f6dfdd9 100644 --- a/drivers/rtc/interface.c +++ b/drivers/rtc/interface.c @@ -145,6 +145,13 @@ int rtc_set_alarm(struct class_device *class_dev, struct rtc_wkalrm *alarm) } EXPORT_SYMBOL_GPL(rtc_set_alarm); +/** + * rtc_update_irq - report RTC periodic, alarm, and/or update irqs + * @class_dev: the rtc's class device + * @num: how many irqs are being reported (usually one) + * @events: mask of RTC_IRQF with one or more of RTC_PF, RTC_AF, RTC_UF + * Context: in_interrupt(), irqs blocked + */ void rtc_update_irq(struct class_device *class_dev, unsigned long num, unsigned long events) { @@ -201,12 +208,12 @@ int rtc_irq_register(struct class_device *class_dev, struct rtc_task *task) if (task == NULL || task->func == NULL) return -EINVAL; - spin_lock(&rtc->irq_task_lock); + spin_lock_irq(&rtc->irq_task_lock); if (rtc->irq_task == NULL) { rtc->irq_task = task; retval = 0; } - spin_unlock(&rtc->irq_task_lock); + spin_unlock_irq(&rtc->irq_task_lock); return retval; } @@ -216,10 +223,10 @@ void rtc_irq_unregister(struct class_device *class_dev, struct rtc_task *task) { struct rtc_device *rtc = to_rtc_device(class_dev); - spin_lock(&rtc->irq_task_lock); + spin_lock_irq(&rtc->irq_task_lock); if (rtc->irq_task == task) rtc->irq_task = NULL; - spin_unlock(&rtc->irq_task_lock); + spin_unlock_irq(&rtc->irq_task_lock); } EXPORT_SYMBOL_GPL(rtc_irq_unregister); @@ -265,3 +272,4 @@ int rtc_irq_set_freq(struct class_device *class_dev, struct rtc_task *task, int } return err; } +EXPORT_SYMBOL_GPL(rtc_irq_set_freq); diff --git a/drivers/rtc/rtc-at91.c b/drivers/rtc/rtc-at91.c index bd61e99540a..5c8addcaf1f 100644 --- a/drivers/rtc/rtc-at91.c +++ b/drivers/rtc/rtc-at91.c @@ -292,7 +292,8 @@ static int __init at91_rtc_probe(struct platform_device *pdev) AT91_RTC_CALEV); ret = request_irq(AT91_ID_SYS, at91_rtc_interrupt, - IRQF_SHARED, "at91_rtc", pdev); + IRQF_DISABLED | IRQF_SHARED, + "at91_rtc", pdev); if (ret) { printk(KERN_ERR "at91_rtc: IRQ %d already in use.\n", AT91_ID_SYS); diff --git a/drivers/rtc/rtc-dev.c b/drivers/rtc/rtc-dev.c index dcf5f86461f..828b329e08e 100644 --- a/drivers/rtc/rtc-dev.c +++ b/drivers/rtc/rtc-dev.c @@ -62,7 +62,9 @@ static void rtc_uie_task(struct work_struct *work) int err; err = rtc_read_time(&rtc->class_dev, &tm); - spin_lock_irq(&rtc->irq_lock); + + local_irq_disable(); + spin_lock(&rtc->irq_lock); if (rtc->stop_uie_polling || err) { rtc->uie_task_active = 0; } else if (rtc->oldsecs != tm.tm_sec) { @@ -75,11 +77,11 @@ static void rtc_uie_task(struct work_struct *work) } else if (schedule_work(&rtc->uie_task) == 0) { rtc->uie_task_active = 0; } - spin_unlock_irq(&rtc->irq_lock); + spin_unlock(&rtc->irq_lock); if (num) rtc_update_irq(&rtc->class_dev, num, RTC_UF | RTC_IRQF); + local_irq_enable(); } - static void rtc_uie_timer(unsigned long data) { struct rtc_device *rtc = (struct rtc_device *)data; @@ -215,7 +217,7 @@ static int rtc_dev_ioctl(struct inode *inode, struct file *file, struct rtc_wkalrm alarm; void __user *uarg = (void __user *) arg; - /* check that the calles has appropriate permissions + /* check that the calling task has appropriate permissions * for certain ioctls. doing this check here is useful * to avoid duplicate code in each driver. */ @@ -239,10 +241,10 @@ static int rtc_dev_ioctl(struct inode *inode, struct file *file, /* avoid conflicting IRQ users */ if (cmd == RTC_PIE_ON || cmd == RTC_PIE_OFF || cmd == RTC_IRQP_SET) { - spin_lock(&rtc->irq_task_lock); + spin_lock_irq(&rtc->irq_task_lock); if (rtc->irq_task) err = -EBUSY; - spin_unlock(&rtc->irq_task_lock); + spin_unlock_irq(&rtc->irq_task_lock); if (err < 0) return err; @@ -300,6 +302,17 @@ static int rtc_dev_ioctl(struct inode *inode, struct file *file, err = rtc_set_time(class_dev, &tm); break; + + case RTC_IRQP_READ: + if (ops->irq_set_freq) + err = put_user(rtc->irq_freq, (unsigned long *) arg); + break; + + case RTC_IRQP_SET: + if (ops->irq_set_freq) + err = rtc_irq_set_freq(class_dev, rtc->irq_task, arg); + break; + #if 0 case RTC_EPOCH_SET: #ifndef rtc_epoch diff --git a/drivers/rtc/rtc-ds1553.c b/drivers/rtc/rtc-ds1553.c index 78552e6e76a..001eb1123a6 100644 --- a/drivers/rtc/rtc-ds1553.c +++ b/drivers/rtc/rtc-ds1553.c @@ -340,7 +340,8 @@ static int __init ds1553_rtc_probe(struct platform_device *pdev) if (pdata->irq >= 0) { writeb(0, ioaddr + RTC_INTERRUPTS); - if (request_irq(pdata->irq, ds1553_rtc_interrupt, IRQF_SHARED, + if (request_irq(pdata->irq, ds1553_rtc_interrupt, + IRQF_DISABLED | IRQF_SHARED, pdev->name, pdev) < 0) { dev_warn(&pdev->dev, "interrupt not available.\n"); pdata->irq = -1; diff --git a/drivers/rtc/rtc-rs5c372.c b/drivers/rtc/rtc-rs5c372.c index 2a86632580f..a44fe4efa21 100644 --- a/drivers/rtc/rtc-rs5c372.c +++ b/drivers/rtc/rtc-rs5c372.c @@ -126,13 +126,13 @@ static int rs5c372_get_trim(struct i2c_client *client, int *osc, int *trim) return -EIO; } - dev_dbg(&client->dev, "%s: raw trim=%x\n", __FUNCTION__, *trim); - if (osc) *osc = (buf & RS5C372_TRIM_XSL) ? 32000 : 32768; - if (trim) + if (trim) { *trim = buf & RS5C372_TRIM_MASK; + dev_dbg(&client->dev, "%s: raw trim=%x\n", __FUNCTION__, *trim); + } return 0; } diff --git a/drivers/rtc/rtc-test.c b/drivers/rtc/rtc-test.c index bc4bd24508a..6ef9c62d503 100644 --- a/drivers/rtc/rtc-test.c +++ b/drivers/rtc/rtc-test.c @@ -99,6 +99,7 @@ static ssize_t test_irq_store(struct device *dev, struct rtc_device *rtc = platform_get_drvdata(plat_dev); retval = count; + local_irq_disable(); if (strncmp(buf, "tick", 4) == 0) rtc_update_irq(&rtc->class_dev, 1, RTC_PF | RTC_IRQF); else if (strncmp(buf, "alarm", 5) == 0) @@ -107,6 +108,7 @@ static ssize_t test_irq_store(struct device *dev, rtc_update_irq(&rtc->class_dev, 1, RTC_UF | RTC_IRQF); else retval = -EINVAL; + local_irq_enable(); return retval; } diff --git a/drivers/s390/net/claw.h b/drivers/s390/net/claw.h index 969be465309..1ee9a6f0654 100644 --- a/drivers/s390/net/claw.h +++ b/drivers/s390/net/claw.h @@ -29,7 +29,7 @@ #define CLAW_COMPLETE 0xff /* flag to indicate i/o completed */ /*-----------------------------------------------------* -* CLAW control comand code * +* CLAW control command code * *------------------------------------------------------*/ #define SYSTEM_VALIDATE_REQUEST 0x01 /* System Validate request */ diff --git a/drivers/s390/net/lcs.c b/drivers/s390/net/lcs.c index 16ac68c27a2..66a8aec6efa 100644 --- a/drivers/s390/net/lcs.c +++ b/drivers/s390/net/lcs.c @@ -1147,7 +1147,7 @@ list_modified: * get mac address for the relevant Multicast address */ static void -lcs_get_mac_for_ipm(__u32 ipm, char *mac, struct net_device *dev) +lcs_get_mac_for_ipm(__be32 ipm, char *mac, struct net_device *dev) { LCS_DBF_TEXT(4,trace, "getmac"); if (dev->type == ARPHRD_IEEE802_TR) diff --git a/drivers/s390/net/lcs.h b/drivers/s390/net/lcs.h index 93143932983..b5247dc08b5 100644 --- a/drivers/s390/net/lcs.h +++ b/drivers/s390/net/lcs.h @@ -169,7 +169,7 @@ struct lcs_header { } __attribute__ ((packed)); struct lcs_ip_mac_pair { - __u32 ip_addr; + __be32 ip_addr; __u8 mac_addr[LCS_MAC_LENGTH]; __u8 reserved[2]; } __attribute__ ((packed)); @@ -287,7 +287,7 @@ struct lcs_card { enum lcs_dev_states state; struct net_device *dev; struct net_device_stats stats; - unsigned short (*lan_type_trans)(struct sk_buff *skb, + __be16 (*lan_type_trans)(struct sk_buff *skb, struct net_device *dev); struct ccwgroup_device *gdev; struct lcs_channel read; diff --git a/drivers/s390/net/qeth_eddp.c b/drivers/s390/net/qeth_eddp.c index a363721cf28..6bb558a9a03 100644 --- a/drivers/s390/net/qeth_eddp.c +++ b/drivers/s390/net/qeth_eddp.c @@ -258,7 +258,7 @@ qeth_eddp_create_segment_hdrs(struct qeth_eddp_context *ctx, static inline void qeth_eddp_copy_data_tcp(char *dst, struct qeth_eddp_data *eddp, int len, - u32 *hcsum) + __wsum *hcsum) { struct skb_frag_struct *frag; int left_in_frag; @@ -305,7 +305,7 @@ qeth_eddp_copy_data_tcp(char *dst, struct qeth_eddp_data *eddp, int len, static inline void qeth_eddp_create_segment_data_tcp(struct qeth_eddp_context *ctx, struct qeth_eddp_data *eddp, int data_len, - u32 hcsum) + __wsum hcsum) { u8 *page; int page_remainder; @@ -349,10 +349,10 @@ qeth_eddp_create_segment_data_tcp(struct qeth_eddp_context *ctx, ((struct tcphdr *)eddp->th_in_ctx)->check = csum_fold(hcsum); } -static inline u32 +static inline __wsum qeth_eddp_check_tcp4_hdr(struct qeth_eddp_data *eddp, int data_len) { - u32 phcsum; /* pseudo header checksum */ + __wsum phcsum; /* pseudo header checksum */ QETH_DBF_TEXT(trace, 5, "eddpckt4"); eddp->th.tcp.h.check = 0; @@ -363,11 +363,11 @@ qeth_eddp_check_tcp4_hdr(struct qeth_eddp_data *eddp, int data_len) return csum_partial((u8 *)&eddp->th, eddp->thl, phcsum); } -static inline u32 +static inline __wsum qeth_eddp_check_tcp6_hdr(struct qeth_eddp_data *eddp, int data_len) { - u32 proto; - u32 phcsum; /* pseudo header checksum */ + __be32 proto; + __wsum phcsum; /* pseudo header checksum */ QETH_DBF_TEXT(trace, 5, "eddpckt6"); eddp->th.tcp.h.check = 0; @@ -405,7 +405,7 @@ __qeth_eddp_fill_context_tcp(struct qeth_eddp_context *ctx, { struct tcphdr *tcph; int data_len; - u32 hcsum; + __wsum hcsum; QETH_DBF_TEXT(trace, 5, "eddpftcp"); eddp->skb_offset = sizeof(struct qeth_hdr) + eddp->nhl + eddp->thl; @@ -433,22 +433,22 @@ __qeth_eddp_fill_context_tcp(struct qeth_eddp_context *ctx, eddp->qh.hdr.l3.length = data_len + eddp->nhl + eddp->thl; /* prepare ip hdr */ - if (eddp->skb->protocol == ETH_P_IP){ - eddp->nh.ip4.h.tot_len = data_len + eddp->nhl + - eddp->thl; + if (eddp->skb->protocol == htons(ETH_P_IP)){ + eddp->nh.ip4.h.tot_len = htons(data_len + eddp->nhl + + eddp->thl); eddp->nh.ip4.h.check = 0; eddp->nh.ip4.h.check = ip_fast_csum((u8 *)&eddp->nh.ip4.h, eddp->nh.ip4.h.ihl); } else - eddp->nh.ip6.h.payload_len = data_len + eddp->thl; + eddp->nh.ip6.h.payload_len = htons(data_len + eddp->thl); /* prepare tcp hdr */ if (data_len == (eddp->skb->len - eddp->skb_offset)){ /* last segment -> set FIN and PSH flags */ eddp->th.tcp.h.fin = tcph->fin; eddp->th.tcp.h.psh = tcph->psh; } - if (eddp->skb->protocol == ETH_P_IP) + if (eddp->skb->protocol == htons(ETH_P_IP)) hcsum = qeth_eddp_check_tcp4_hdr(eddp, data_len); else hcsum = qeth_eddp_check_tcp6_hdr(eddp, data_len); @@ -458,9 +458,9 @@ __qeth_eddp_fill_context_tcp(struct qeth_eddp_context *ctx, if (eddp->skb_offset >= eddp->skb->len) break; /* prepare headers for next round */ - if (eddp->skb->protocol == ETH_P_IP) - eddp->nh.ip4.h.id++; - eddp->th.tcp.h.seq += data_len; + if (eddp->skb->protocol == htons(ETH_P_IP)) + eddp->nh.ip4.h.id = htons(ntohs(eddp->nh.ip4.h.id) + 1); + eddp->th.tcp.h.seq = htonl(ntohl(eddp->th.tcp.h.seq) + data_len); } } @@ -472,7 +472,7 @@ qeth_eddp_fill_context_tcp(struct qeth_eddp_context *ctx, QETH_DBF_TEXT(trace, 5, "eddpficx"); /* create our segmentation headers and copy original headers */ - if (skb->protocol == ETH_P_IP) + if (skb->protocol == htons(ETH_P_IP)) eddp = qeth_eddp_create_eddp_data(qhdr, (u8 *)skb->nh.iph, skb->nh.iph->ihl*4, (u8 *)skb->h.th, skb->h.th->doff*4); @@ -490,7 +490,7 @@ qeth_eddp_fill_context_tcp(struct qeth_eddp_context *ctx, memcpy(&eddp->mac, eth_hdr(skb), ETH_HLEN); #ifdef CONFIG_QETH_VLAN if (eddp->mac.h_proto == __constant_htons(ETH_P_8021Q)) { - eddp->vlan[0] = __constant_htons(skb->protocol); + eddp->vlan[0] = skb->protocol; eddp->vlan[1] = htons(vlan_tx_tag_get(skb)); } #endif /* CONFIG_QETH_VLAN */ @@ -588,11 +588,11 @@ qeth_eddp_create_context_tcp(struct qeth_card *card, struct sk_buff *skb, struct qeth_eddp_context *ctx = NULL; QETH_DBF_TEXT(trace, 5, "creddpct"); - if (skb->protocol == ETH_P_IP) + if (skb->protocol == htons(ETH_P_IP)) ctx = qeth_eddp_create_context_generic(card, skb, sizeof(struct qeth_hdr) + skb->nh.iph->ihl*4 + skb->h.th->doff*4); - else if (skb->protocol == ETH_P_IPV6) + else if (skb->protocol == htons(ETH_P_IPV6)) ctx = qeth_eddp_create_context_generic(card, skb, sizeof(struct qeth_hdr) + sizeof(struct ipv6hdr) + skb->h.th->doff*4); diff --git a/drivers/s390/net/qeth_eddp.h b/drivers/s390/net/qeth_eddp.h index cae9ba26505..103768d3bab 100644 --- a/drivers/s390/net/qeth_eddp.h +++ b/drivers/s390/net/qeth_eddp.h @@ -54,7 +54,7 @@ qeth_eddp_check_buffers_for_context(struct qeth_qdio_out_q *, struct qeth_eddp_data { struct qeth_hdr qh; struct ethhdr mac; - u16 vlan[2]; + __be16 vlan[2]; union { struct { struct iphdr h; diff --git a/drivers/scsi/aic94xx/aic94xx_reg_def.h b/drivers/scsi/aic94xx/aic94xx_reg_def.h index b79f45f3ad4..a11f4e6d8bd 100644 --- a/drivers/scsi/aic94xx/aic94xx_reg_def.h +++ b/drivers/scsi/aic94xx/aic94xx_reg_def.h @@ -2000,7 +2000,7 @@ * The host accesses this scratch in a different manner from the * central sequencer. The sequencer has to use CSEQ registers CSCRPAGE * and CMnSCRPAGE to access the scratch memory. A flat mapping of the - * scratch memory is avaliable for software convenience and to prevent + * scratch memory is available for software convenience and to prevent * corruption while the sequencer is running. This memory is mapped * onto addresses 800h - BFFh, total of 400h bytes. * diff --git a/drivers/scsi/aic94xx/aic94xx_sds.c b/drivers/scsi/aic94xx/aic94xx_sds.c index de7c04d4254..e5a0ec37e95 100644 --- a/drivers/scsi/aic94xx/aic94xx_sds.c +++ b/drivers/scsi/aic94xx/aic94xx_sds.c @@ -64,7 +64,7 @@ struct asd_ocm_dir { #define OCM_INIT_DIR_ENTRIES 5 /*************************************************************************** -* OCM dircetory default +* OCM directory default ***************************************************************************/ static struct asd_ocm_dir OCMDirInit = { @@ -73,7 +73,7 @@ static struct asd_ocm_dir OCMDirInit = }; /*************************************************************************** -* OCM dircetory Entries default +* OCM directory Entries default ***************************************************************************/ static struct asd_ocm_dir_ent OCMDirEntriesInit[OCM_INIT_DIR_ENTRIES] = { diff --git a/drivers/scsi/ncr53c8xx.c b/drivers/scsi/ncr53c8xx.c index 6cc2bc2f62b..adb8eb4f5fd 100644 --- a/drivers/scsi/ncr53c8xx.c +++ b/drivers/scsi/ncr53c8xx.c @@ -185,7 +185,7 @@ static inline struct list_head *ncr_list_pop(struct list_head *head) ** power of 2 cache line size. ** Enhanced in linux-2.3.44 to provide a memory pool ** per pcidev to support dynamic dma mapping. (I would -** have preferred a real bus astraction, btw). +** have preferred a real bus abstraction, btw). ** **========================================================== */ @@ -1438,7 +1438,7 @@ struct head { ** The first four bytes (scr_st[4]) are used inside the script by ** "COPY" commands. ** Because source and destination must have the same alignment -** in a DWORD, the fields HAVE to be at the choosen offsets. +** in a DWORD, the fields HAVE to be at the chosen offsets. ** xerr_st 0 (0x34) scratcha ** sync_st 1 (0x05) sxfer ** wide_st 3 (0x03) scntl3 @@ -1498,7 +1498,7 @@ struct head { ** the DSA (data structure address) register points ** to this substructure of the ccb. ** This substructure contains the header with -** the script-processor-changable data and +** the script-processor-changeable data and ** data blocks for the indirect move commands. ** **---------------------------------------------------------- @@ -5107,7 +5107,7 @@ void ncr_complete (struct ncb *np, struct ccb *cp) /* ** This CCB has been skipped by the NCR. -** Queue it in the correponding unit queue. +** Queue it in the corresponding unit queue. */ static void ncr_ccb_skipped(struct ncb *np, struct ccb *cp) { @@ -5896,8 +5896,8 @@ static void ncr_log_hard_error(struct ncb *np, u16 sist, u_char dstat) ** ** In normal cases, interrupt conditions occur one at a ** time. The ncr is able to stack in some extra registers -** other interrupts that will occurs after the first one. -** But severall interrupts may occur at the same time. +** other interrupts that will occur after the first one. +** But, several interrupts may occur at the same time. ** ** We probably should only try to deal with the normal ** case, but it seems that multiple interrupts occur in @@ -6796,7 +6796,7 @@ void ncr_int_sir (struct ncb *np) ** The host status field is set to HS_NEGOTIATE to mark this ** situation. ** -** If the target doesn't answer this message immidiately +** If the target doesn't answer this message immediately ** (as required by the standard), the SIR_NEGO_FAIL interrupt ** will be raised eventually. ** The handler removes the HS_NEGOTIATE status, and sets the diff --git a/drivers/scsi/ncr53c8xx.h b/drivers/scsi/ncr53c8xx.h index cb8b7701431..b39357d9af8 100644 --- a/drivers/scsi/ncr53c8xx.h +++ b/drivers/scsi/ncr53c8xx.h @@ -218,7 +218,7 @@ ** Same as option 1, but also deal with ** misconfigured interrupts. ** -** - Edge triggerred instead of level sensitive. +** - Edge triggered instead of level sensitive. ** - No interrupt line connected. ** - IRQ number misconfigured. ** @@ -549,7 +549,7 @@ struct ncr_driver_setup { /* ** Initial setup. -** Can be overriden at startup by a command line. +** Can be overridden at startup by a command line. */ #define SCSI_NCR_DRIVER_SETUP \ { \ @@ -1093,7 +1093,7 @@ struct scr_tblsel { **----------------------------------------------------------- ** On 810A, 860, 825A, 875, 895 and 896 chips the content ** of SFBR register can be used as data (SCR_SFBR_DATA). -** The 896 has additionnal IO registers starting at +** The 896 has additional IO registers starting at ** offset 0x80. Bit 7 of register offset is stored in ** bit 7 of the SCRIPTS instruction first DWORD. **----------------------------------------------------------- diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 23334c8bc4c..d895a1adb42 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -16,7 +16,7 @@ config SPI controller and a chipselect. Most SPI slaves don't support dynamic device discovery; some are even write-only or read-only. - SPI is widely used by microcontollers to talk with sensors, + SPI is widely used by microcontrollers to talk with sensors, eeprom and flash memory, codecs and various other controller chips, analog to digital (and d-to-a) converters, and more. MMC and SD cards can be accessed using SPI protocol; and for diff --git a/drivers/usb/atm/speedtch.c b/drivers/usb/atm/speedtch.c index 7ed34bb1c50..8ed6c75adf0 100644 --- a/drivers/usb/atm/speedtch.c +++ b/drivers/usb/atm/speedtch.c @@ -837,8 +837,8 @@ static int speedtch_bind(struct usbatm_data *usbatm, const struct usb_endpoint_descriptor *endpoint_desc = &desc->endpoint[i].desc; if ((endpoint_desc->bEndpointAddress == target_address)) { - use_isoc = (endpoint_desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == - USB_ENDPOINT_XFER_ISOC; + use_isoc = + usb_endpoint_xfer_isoc(endpoint_desc); break; } } diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c index e39bb09f5af..f2d196fa1e8 100644 --- a/drivers/usb/atm/ueagle-atm.c +++ b/drivers/usb/atm/ueagle-atm.c @@ -401,9 +401,8 @@ static int uea_send_modem_cmd(struct usb_device *usb, int ret = -ENOMEM; u8 *xfer_buff; - xfer_buff = kmalloc(size, GFP_KERNEL); + xfer_buff = kmemdup(buff, size, GFP_KERNEL); if (xfer_buff) { - memcpy(xfer_buff, buff, size); ret = usb_control_msg(usb, usb_sndctrlpipe(usb, 0), LOAD_INTERNAL, @@ -595,14 +594,12 @@ static int uea_idma_write(struct uea_softc *sc, void *data, u32 size) u8 *xfer_buff; int bytes_read; - xfer_buff = kmalloc(size, GFP_KERNEL); + xfer_buff = kmemdup(data, size, GFP_KERNEL); if (!xfer_buff) { uea_err(INS_TO_USBDEV(sc), "can't allocate xfer_buff\n"); return ret; } - memcpy(xfer_buff, data, size); - ret = usb_bulk_msg(sc->usb_dev, usb_sndbulkpipe(sc->usb_dev, UEA_IDMA_PIPE), xfer_buff, size, &bytes_read, BULK_TIMEOUT); @@ -765,12 +762,11 @@ static int uea_request(struct uea_softc *sc, u8 *xfer_buff; int ret = -ENOMEM; - xfer_buff = kmalloc(size, GFP_KERNEL); + xfer_buff = kmemdup(data, size, GFP_KERNEL); if (!xfer_buff) { uea_err(INS_TO_USBDEV(sc), "can't allocate xfer_buff\n"); return ret; } - memcpy(xfer_buff, data, size); ret = usb_control_msg(sc->usb_dev, usb_sndctrlpipe(sc->usb_dev, 0), UCDC_SEND_ENCAPSULATED_COMMAND, diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 6408e10fdbf..7f1fa956dcd 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -892,7 +892,7 @@ skip_normal_probe: /* workaround for switched endpoints */ - if ((epread->bEndpointAddress & USB_DIR_IN) != USB_DIR_IN) { + if (!usb_endpoint_dir_in(epread)) { /* descriptors are swapped */ struct usb_endpoint_descriptor *t; dev_dbg(&intf->dev,"The data interface has switched endpoints"); diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig index 6e3b5358a76..f8324d8d06a 100644 --- a/drivers/usb/core/Kconfig +++ b/drivers/usb/core/Kconfig @@ -72,6 +72,21 @@ config USB_SUSPEND If you are unsure about this, say N here. +config USB_MULTITHREAD_PROBE + bool "USB Multi-threaded probe (EXPERIMENTAL)" + depends on USB && EXPERIMENTAL + default n + help + Say Y here if you want the USB core to spawn a new thread for + every USB device that is probed. This can cause a small speedup + in boot times on systems with a lot of different USB devices. + + This option should be safe to enable, but if any odd probing + problems are found, please disable it, or dynamically turn it + off in the /sys/module/usbcore/parameters/multithread_probe + file + + When in doubt, say N. config USB_OTG bool diff --git a/drivers/usb/core/devices.c b/drivers/usb/core/devices.c index 3538c2fdadf..ea398e5d50a 100644 --- a/drivers/usb/core/devices.c +++ b/drivers/usb/core/devices.c @@ -175,12 +175,13 @@ static char *usb_dump_endpoint_descriptor ( ) { char dir, unit, *type; - unsigned interval, in, bandwidth = 1; + unsigned interval, bandwidth = 1; if (start > end) return start; - in = (desc->bEndpointAddress & USB_DIR_IN); - dir = in ? 'I' : 'O'; + + dir = usb_endpoint_dir_in(desc) ? 'I' : 'O'; + if (speed == USB_SPEED_HIGH) { switch (le16_to_cpu(desc->wMaxPacketSize) & (0x03 << 11)) { case 1 << 11: bandwidth = 2; break; @@ -204,7 +205,7 @@ static char *usb_dump_endpoint_descriptor ( break; case USB_ENDPOINT_XFER_BULK: type = "Bulk"; - if (speed == USB_SPEED_HIGH && !in) /* uframes per NAK */ + if (speed == USB_SPEED_HIGH && dir == 'O') /* uframes per NAK */ interval = desc->bInterval; else interval = 0; diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index fed92be63b5..3ed4cb2d56d 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -561,7 +561,7 @@ static int usbdev_open(struct inode *inode, struct file *file) dev = inode->i_private; if (!dev) goto out; - ret = usb_autoresume_device(dev, 1); + ret = usb_autoresume_device(dev); if (ret) goto out; @@ -609,7 +609,7 @@ static int usbdev_release(struct inode *inode, struct file *file) releaseintf(ps, ifnum); } destroy_all_async(ps); - usb_autosuspend_device(dev, 1); + usb_autosuspend_device(dev); usb_unlock_device(dev); usb_put_dev(dev); put_pid(ps->disc_pid); diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index 113e484c763..d6eb5ce1dd1 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -205,7 +205,7 @@ static int usb_probe_interface(struct device *dev) if (id) { dev_dbg(dev, "%s - got id\n", __FUNCTION__); - error = usb_autoresume_device(udev, 1); + error = usb_autoresume_device(udev); if (error) return error; @@ -229,7 +229,7 @@ static int usb_probe_interface(struct device *dev) } else intf->condition = USB_INTERFACE_BOUND; - usb_autosuspend_device(udev, 1); + usb_autosuspend_device(udev); } return error; @@ -247,7 +247,7 @@ static int usb_unbind_interface(struct device *dev) /* Autoresume for set_interface call below */ udev = interface_to_usbdev(intf); - error = usb_autoresume_device(udev, 1); + error = usb_autoresume_device(udev); /* release all urbs for this interface */ usb_disable_interface(interface_to_usbdev(intf), intf); @@ -265,7 +265,7 @@ static int usb_unbind_interface(struct device *dev) intf->needs_remote_wakeup = 0; if (!error) - usb_autosuspend_device(udev, 1); + usb_autosuspend_device(udev); return 0; } @@ -408,6 +408,16 @@ static int usb_match_one_id(struct usb_interface *interface, (id->bDeviceProtocol != dev->descriptor.bDeviceProtocol)) return 0; + /* The interface class, subclass, and protocol should never be + * checked for a match if the device class is Vendor Specific, + * unless the match record specifies the Vendor ID. */ + if (dev->descriptor.bDeviceClass == USB_CLASS_VENDOR_SPEC && + !(id->match_flags & USB_DEVICE_ID_MATCH_VENDOR) && + (id->match_flags & (USB_DEVICE_ID_MATCH_INT_CLASS | + USB_DEVICE_ID_MATCH_INT_SUBCLASS | + USB_DEVICE_ID_MATCH_INT_PROTOCOL))) + return 0; + if ((id->match_flags & USB_DEVICE_ID_MATCH_INT_CLASS) && (id->bInterfaceClass != intf->desc.bInterfaceClass)) return 0; @@ -476,7 +486,17 @@ static int usb_match_one_id(struct usb_interface *interface, * most general; they let drivers bind to any interface on a * multiple-function device. Use the USB_INTERFACE_INFO * macro, or its siblings, to match class-per-interface style - * devices (as recorded in bDeviceClass). + * devices (as recorded in bInterfaceClass). + * + * Note that an entry created by USB_INTERFACE_INFO won't match + * any interface if the device class is set to Vendor-Specific. + * This is deliberate; according to the USB spec the meanings of + * the interface class/subclass/protocol for these devices are also + * vendor-specific, and hence matching against a standard product + * class wouldn't work anyway. If you really want to use an + * interface-based match for such a device, create a match record + * that also specifies the vendor ID. (Unforunately there isn't a + * standard macro for creating records like this.) * * Within those groups, remember that not all combinations are * meaningful. For example, don't give a product version range @@ -505,7 +525,7 @@ const struct usb_device_id *usb_match_id(struct usb_interface *interface, } EXPORT_SYMBOL_GPL_FUTURE(usb_match_id); -int usb_device_match(struct device *dev, struct device_driver *drv) +static int usb_device_match(struct device *dev, struct device_driver *drv) { /* devices and interfaces are handled separately */ if (is_usb_device(dev)) { @@ -790,7 +810,7 @@ EXPORT_SYMBOL_GPL_FUTURE(usb_deregister); #ifdef CONFIG_PM /* Caller has locked udev's pm_mutex */ -static int suspend_device(struct usb_device *udev, pm_message_t msg) +static int usb_suspend_device(struct usb_device *udev, pm_message_t msg) { struct usb_device_driver *udriver; int status = 0; @@ -817,7 +837,7 @@ done: } /* Caller has locked udev's pm_mutex */ -static int resume_device(struct usb_device *udev) +static int usb_resume_device(struct usb_device *udev) { struct usb_device_driver *udriver; int status = 0; @@ -843,7 +863,7 @@ done: } /* Caller has locked intf's usb_device's pm mutex */ -static int suspend_interface(struct usb_interface *intf, pm_message_t msg) +static int usb_suspend_interface(struct usb_interface *intf, pm_message_t msg) { struct usb_driver *driver; int status = 0; @@ -880,7 +900,7 @@ done: } /* Caller has locked intf's usb_device's pm_mutex */ -static int resume_interface(struct usb_interface *intf) +static int usb_resume_interface(struct usb_interface *intf) { struct usb_driver *driver; int status = 0; @@ -920,6 +940,44 @@ done: return status; } +#ifdef CONFIG_USB_SUSPEND + +/* Internal routine to check whether we may autosuspend a device. */ +static int autosuspend_check(struct usb_device *udev) +{ + int i; + struct usb_interface *intf; + + /* For autosuspend, fail fast if anything is in use. + * Also fail if any interfaces require remote wakeup but it + * isn't available. */ + udev->do_remote_wakeup = device_may_wakeup(&udev->dev); + if (udev->pm_usage_cnt > 0) + return -EBUSY; + if (udev->actconfig) { + for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) { + intf = udev->actconfig->interface[i]; + if (!is_active(intf)) + continue; + if (intf->pm_usage_cnt > 0) + return -EBUSY; + if (intf->needs_remote_wakeup && + !udev->do_remote_wakeup) { + dev_dbg(&udev->dev, "remote wakeup needed " + "for autosuspend\n"); + return -EOPNOTSUPP; + } + } + } + return 0; +} + +#else + +#define autosuspend_check(udev) 0 + +#endif + /** * usb_suspend_both - suspend a USB device and its interfaces * @udev: the usb_device to suspend @@ -971,52 +1029,34 @@ int usb_suspend_both(struct usb_device *udev, pm_message_t msg) udev->do_remote_wakeup = device_may_wakeup(&udev->dev); - /* For autosuspend, fail fast if anything is in use. - * Also fail if any interfaces require remote wakeup but it - * isn't available. */ if (udev->auto_pm) { - if (udev->pm_usage_cnt > 0) - return -EBUSY; - if (udev->actconfig) { - for (; i < udev->actconfig->desc.bNumInterfaces; i++) { - intf = udev->actconfig->interface[i]; - if (!is_active(intf)) - continue; - if (intf->pm_usage_cnt > 0) - return -EBUSY; - if (intf->needs_remote_wakeup && - !udev->do_remote_wakeup) { - dev_dbg(&udev->dev, - "remote wakeup needed for autosuspend\n"); - return -EOPNOTSUPP; - } - } - i = 0; - } + status = autosuspend_check(udev); + if (status < 0) + return status; } /* Suspend all the interfaces and then udev itself */ if (udev->actconfig) { for (; i < udev->actconfig->desc.bNumInterfaces; i++) { intf = udev->actconfig->interface[i]; - status = suspend_interface(intf, msg); + status = usb_suspend_interface(intf, msg); if (status != 0) break; } } if (status == 0) - status = suspend_device(udev, msg); + status = usb_suspend_device(udev, msg); /* If the suspend failed, resume interfaces that did get suspended */ if (status != 0) { while (--i >= 0) { intf = udev->actconfig->interface[i]; - resume_interface(intf); + usb_resume_interface(intf); } /* If the suspend succeeded, propagate it up the tree */ } else if (parent) - usb_autosuspend_device(parent, 0); + usb_autosuspend_device(parent); // dev_dbg(&udev->dev, "%s: status %d\n", __FUNCTION__, status); return status; @@ -1064,9 +1104,25 @@ int usb_resume_both(struct usb_device *udev) /* Propagate the resume up the tree, if necessary */ if (udev->state == USB_STATE_SUSPENDED) { if (parent) { - usb_pm_lock(parent); - parent->auto_pm = 1; - status = usb_resume_both(parent); + status = usb_autoresume_device(parent); + if (status == 0) { + status = usb_resume_device(udev); + if (status) { + usb_autosuspend_device(parent); + + /* It's possible usb_resume_device() + * failed after the port was + * unsuspended, causing udev to be + * logically disconnected. We don't + * want usb_disconnect() to autosuspend + * the parent again, so tell it that + * udev disconnected while still + * suspended. */ + if (udev->state == + USB_STATE_NOTATTACHED) + udev->discon_suspended = 1; + } + } } else { /* We can't progagate beyond the USB subsystem, @@ -1075,24 +1131,20 @@ int usb_resume_both(struct usb_device *udev) if (udev->dev.parent->power.power_state.event != PM_EVENT_ON) status = -EHOSTUNREACH; - } - if (status == 0) - status = resume_device(udev); - if (parent) - usb_pm_unlock(parent); + else + status = usb_resume_device(udev); + } } else { /* Needed only for setting udev->dev.power.power_state.event * and for possible debugging message. */ - status = resume_device(udev); + status = usb_resume_device(udev); } - /* Now the parent won't suspend until we are finished */ - if (status == 0 && udev->actconfig) { for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) { intf = udev->actconfig->interface[i]; - resume_interface(intf); + usb_resume_interface(intf); } } @@ -1102,39 +1154,53 @@ int usb_resume_both(struct usb_device *udev) #ifdef CONFIG_USB_SUSPEND +/* Internal routine to adjust a device's usage counter and change + * its autosuspend state. + */ +static int usb_autopm_do_device(struct usb_device *udev, int inc_usage_cnt) +{ + int status = 0; + + usb_pm_lock(udev); + udev->pm_usage_cnt += inc_usage_cnt; + WARN_ON(udev->pm_usage_cnt < 0); + if (inc_usage_cnt >= 0 && udev->pm_usage_cnt > 0) { + udev->auto_pm = 1; + status = usb_resume_both(udev); + if (status != 0) + udev->pm_usage_cnt -= inc_usage_cnt; + } else if (inc_usage_cnt <= 0 && autosuspend_check(udev) == 0) + queue_delayed_work(ksuspend_usb_wq, &udev->autosuspend, + USB_AUTOSUSPEND_DELAY); + usb_pm_unlock(udev); + return status; +} + /** * usb_autosuspend_device - delayed autosuspend of a USB device and its interfaces * @udev: the usb_device to autosuspend - * @dec_usage_cnt: flag to decrement @udev's PM-usage counter * * This routine should be called when a core subsystem is finished using * @udev and wants to allow it to autosuspend. Examples would be when * @udev's device file in usbfs is closed or after a configuration change. * - * @dec_usage_cnt should be 1 if the subsystem previously incremented - * @udev's usage counter (such as by passing 1 to usb_autoresume_device); - * otherwise it should be 0. - * - * If the usage counter for @udev or any of its active interfaces is greater - * than 0, the autosuspend request will not be queued. (If an interface - * driver does not support autosuspend then its usage counter is permanently - * positive.) Likewise, if an interface driver requires remote-wakeup - * capability during autosuspend but remote wakeup is disabled, the - * autosuspend will fail. + * @udev's usage counter is decremented. If it or any of the usage counters + * for an active interface is greater than 0, no autosuspend request will be + * queued. (If an interface driver does not support autosuspend then its + * usage counter is permanently positive.) Furthermore, if an interface + * driver requires remote-wakeup capability during autosuspend but remote + * wakeup is disabled, the autosuspend will fail. * * Often the caller will hold @udev's device lock, but this is not * necessary. * * This routine can run only in process context. */ -void usb_autosuspend_device(struct usb_device *udev, int dec_usage_cnt) +void usb_autosuspend_device(struct usb_device *udev) { - usb_pm_lock(udev); - udev->pm_usage_cnt -= dec_usage_cnt; - if (udev->pm_usage_cnt <= 0) - queue_delayed_work(ksuspend_usb_wq, &udev->autosuspend, - USB_AUTOSUSPEND_DELAY); - usb_pm_unlock(udev); + int status; + + status = usb_autopm_do_device(udev, -1); // dev_dbg(&udev->dev, "%s: cnt %d\n", // __FUNCTION__, udev->pm_usage_cnt); } @@ -1142,44 +1208,59 @@ void usb_autosuspend_device(struct usb_device *udev, int dec_usage_cnt) /** * usb_autoresume_device - immediately autoresume a USB device and its interfaces * @udev: the usb_device to autoresume - * @inc_usage_cnt: flag to increment @udev's PM-usage counter * * This routine should be called when a core subsystem wants to use @udev - * and needs to guarantee that it is not suspended. In addition, the - * caller can prevent @udev from being autosuspended subsequently. (Note - * that this will not prevent suspend events originating in the PM core.) - * Examples would be when @udev's device file in usbfs is opened (autosuspend - * should be prevented until the file is closed) or when a remote-wakeup - * request is received (later autosuspends should not be prevented). + * and needs to guarantee that it is not suspended. No autosuspend will + * occur until usb_autosuspend_device is called. (Note that this will not + * prevent suspend events originating in the PM core.) Examples would be + * when @udev's device file in usbfs is opened or when a remote-wakeup + * request is received. * - * @inc_usage_cnt should be 1 to increment @udev's usage counter and prevent - * autosuspends. This prevention will persist until the usage counter is - * decremented again (such as by passing 1 to usb_autosuspend_device). - * Otherwise @inc_usage_cnt should be 0 to leave the usage counter unchanged. - * Regardless, if the autoresume fails then the usage counter is not - * incremented. + * @udev's usage counter is incremented to prevent subsequent autosuspends. + * However if the autoresume fails then the usage counter is re-decremented. * * Often the caller will hold @udev's device lock, but this is not * necessary (and attempting it might cause deadlock). * * This routine can run only in process context. */ -int usb_autoresume_device(struct usb_device *udev, int inc_usage_cnt) +int usb_autoresume_device(struct usb_device *udev) { int status; - usb_pm_lock(udev); - udev->pm_usage_cnt += inc_usage_cnt; - udev->auto_pm = 1; - status = usb_resume_both(udev); - if (status != 0) - udev->pm_usage_cnt -= inc_usage_cnt; - usb_pm_unlock(udev); + status = usb_autopm_do_device(udev, 1); // dev_dbg(&udev->dev, "%s: status %d cnt %d\n", // __FUNCTION__, status, udev->pm_usage_cnt); return status; } +/* Internal routine to adjust an interface's usage counter and change + * its device's autosuspend state. + */ +static int usb_autopm_do_interface(struct usb_interface *intf, + int inc_usage_cnt) +{ + struct usb_device *udev = interface_to_usbdev(intf); + int status = 0; + + usb_pm_lock(udev); + if (intf->condition == USB_INTERFACE_UNBOUND) + status = -ENODEV; + else { + intf->pm_usage_cnt += inc_usage_cnt; + if (inc_usage_cnt >= 0 && intf->pm_usage_cnt > 0) { + udev->auto_pm = 1; + status = usb_resume_both(udev); + if (status != 0) + intf->pm_usage_cnt -= inc_usage_cnt; + } else if (inc_usage_cnt <= 0 && autosuspend_check(udev) == 0) + queue_delayed_work(ksuspend_usb_wq, &udev->autosuspend, + USB_AUTOSUSPEND_DELAY); + } + usb_pm_unlock(udev); + return status; +} + /** * usb_autopm_put_interface - decrement a USB interface's PM-usage counter * @intf: the usb_interface whose counter should be decremented @@ -1213,17 +1294,11 @@ int usb_autoresume_device(struct usb_device *udev, int inc_usage_cnt) */ void usb_autopm_put_interface(struct usb_interface *intf) { - struct usb_device *udev = interface_to_usbdev(intf); + int status; - usb_pm_lock(udev); - if (intf->condition != USB_INTERFACE_UNBOUND && - --intf->pm_usage_cnt <= 0) { - queue_delayed_work(ksuspend_usb_wq, &udev->autosuspend, - USB_AUTOSUSPEND_DELAY); - } - usb_pm_unlock(udev); - // dev_dbg(&intf->dev, "%s: cnt %d\n", - // __FUNCTION__, intf->pm_usage_cnt); + status = usb_autopm_do_interface(intf, -1); + // dev_dbg(&intf->dev, "%s: status %d cnt %d\n", + // __FUNCTION__, status, intf->pm_usage_cnt); } EXPORT_SYMBOL_GPL(usb_autopm_put_interface); @@ -1260,26 +1335,37 @@ EXPORT_SYMBOL_GPL(usb_autopm_put_interface); */ int usb_autopm_get_interface(struct usb_interface *intf) { - struct usb_device *udev = interface_to_usbdev(intf); - int status; + int status; - usb_pm_lock(udev); - if (intf->condition == USB_INTERFACE_UNBOUND) - status = -ENODEV; - else { - ++intf->pm_usage_cnt; - udev->auto_pm = 1; - status = usb_resume_both(udev); - if (status != 0) - --intf->pm_usage_cnt; - } - usb_pm_unlock(udev); + status = usb_autopm_do_interface(intf, 1); // dev_dbg(&intf->dev, "%s: status %d cnt %d\n", // __FUNCTION__, status, intf->pm_usage_cnt); return status; } EXPORT_SYMBOL_GPL(usb_autopm_get_interface); +/** + * usb_autopm_set_interface - set a USB interface's autosuspend state + * @intf: the usb_interface whose state should be set + * + * This routine sets the autosuspend state of @intf's device according + * to @intf's usage counter, which the caller must have set previously. + * If the counter is <= 0, the device is autosuspended (if it isn't + * already suspended and if nothing else prevents the autosuspend). If + * the counter is > 0, the device is autoresumed (if it isn't already + * awake). + */ +int usb_autopm_set_interface(struct usb_interface *intf) +{ + int status; + + status = usb_autopm_do_interface(intf, 0); + // dev_dbg(&intf->dev, "%s: status %d cnt %d\n", + // __FUNCTION__, status, intf->pm_usage_cnt); + return status; +} +EXPORT_SYMBOL_GPL(usb_autopm_set_interface); + #endif /* CONFIG_USB_SUSPEND */ static int usb_suspend(struct device *dev, pm_message_t message) diff --git a/drivers/usb/core/endpoint.c b/drivers/usb/core/endpoint.c index 3b2d137912b..c505b767cee 100644 --- a/drivers/usb/core/endpoint.c +++ b/drivers/usb/core/endpoint.c @@ -10,15 +10,20 @@ */ #include <linux/kernel.h> +#include <linux/spinlock.h> +#include <linux/idr.h> #include <linux/usb.h> #include "usb.h" -/* endpoint stuff */ +#define MAX_ENDPOINT_MINORS (64*128*32) +static int usb_endpoint_major; +static DEFINE_IDR(endpoint_idr); struct ep_device { struct usb_endpoint_descriptor *desc; struct usb_device *udev; struct device dev; + int minor; }; #define to_ep_device(_dev) \ container_of(_dev, struct ep_device, dev) @@ -152,6 +157,55 @@ static struct attribute_group ep_dev_attr_grp = { .attrs = ep_dev_attrs, }; +static int usb_endpoint_major_init(void) +{ + dev_t dev; + int error; + + error = alloc_chrdev_region(&dev, 0, MAX_ENDPOINT_MINORS, + "usb_endpoint"); + if (error) { + err("unable to get a dynamic major for usb endpoints"); + return error; + } + usb_endpoint_major = MAJOR(dev); + + return error; +} + +static void usb_endpoint_major_cleanup(void) +{ + unregister_chrdev_region(MKDEV(usb_endpoint_major, 0), + MAX_ENDPOINT_MINORS); +} + +static int endpoint_get_minor(struct ep_device *ep_dev) +{ + static DEFINE_MUTEX(minor_lock); + int retval = -ENOMEM; + int id; + + mutex_lock(&minor_lock); + if (idr_pre_get(&endpoint_idr, GFP_KERNEL) == 0) + goto exit; + + retval = idr_get_new(&endpoint_idr, ep_dev, &id); + if (retval < 0) { + if (retval == -EAGAIN) + retval = -ENOMEM; + goto exit; + } + ep_dev->minor = id & MAX_ID_MASK; +exit: + mutex_unlock(&minor_lock); + return retval; +} + +static void endpoint_free_minor(struct ep_device *ep_dev) +{ + idr_remove(&endpoint_idr, ep_dev->minor); +} + static struct endpoint_class { struct kref kref; struct class *class; @@ -176,11 +230,20 @@ static int init_endpoint_class(void) ep_class->class = class_create(THIS_MODULE, "usb_endpoint"); if (IS_ERR(ep_class->class)) { result = IS_ERR(ep_class->class); - kfree(ep_class); - ep_class = NULL; - goto exit; + goto class_create_error; } + result = usb_endpoint_major_init(); + if (result) + goto endpoint_major_error; + + goto exit; + +endpoint_major_error: + class_destroy(ep_class->class); +class_create_error: + kfree(ep_class); + ep_class = NULL; exit: return result; } @@ -191,6 +254,7 @@ static void release_endpoint_class(struct kref *kref) class_destroy(ep_class->class); kfree(ep_class); ep_class = NULL; + usb_endpoint_major_cleanup(); } static void destroy_endpoint_class(void) @@ -213,7 +277,6 @@ int usb_create_ep_files(struct device *parent, { char name[8]; struct ep_device *ep_dev; - int minor; int retval; retval = init_endpoint_class(); @@ -226,12 +289,16 @@ int usb_create_ep_files(struct device *parent, goto error_alloc; } - /* fun calculation to determine the minor of this endpoint */ - minor = (((udev->bus->busnum - 1) * 128) * 16) + (udev->devnum - 1); + retval = endpoint_get_minor(ep_dev); + if (retval) { + dev_err(parent, "can not allocate minor number for %s", + ep_dev->dev.bus_id); + goto error_register; + } ep_dev->desc = &endpoint->desc; ep_dev->udev = udev; - ep_dev->dev.devt = MKDEV(442, minor); // FIXME fake number... + ep_dev->dev.devt = MKDEV(usb_endpoint_major, ep_dev->minor); ep_dev->dev.class = ep_class->class; ep_dev->dev.parent = parent; ep_dev->dev.release = ep_device_release; @@ -241,7 +308,7 @@ int usb_create_ep_files(struct device *parent, retval = device_register(&ep_dev->dev); if (retval) - goto error_register; + goto error_chrdev; retval = sysfs_create_group(&ep_dev->dev.kobj, &ep_dev_attr_grp); if (retval) goto error_group; @@ -261,6 +328,9 @@ error_group: destroy_endpoint_class(); return retval; +error_chrdev: + endpoint_free_minor(ep_dev); + error_register: kfree(ep_dev); error_alloc: @@ -271,14 +341,16 @@ exit: void usb_remove_ep_files(struct usb_host_endpoint *endpoint) { + struct ep_device *ep_dev = endpoint->ep_dev; - if (endpoint->ep_dev) { + if (ep_dev) { char name[8]; sprintf(name, "ep_%02x", endpoint->desc.bEndpointAddress); - sysfs_remove_link(&endpoint->ep_dev->dev.parent->kobj, name); - sysfs_remove_group(&endpoint->ep_dev->dev.kobj, &ep_dev_attr_grp); - device_unregister(&endpoint->ep_dev->dev); + sysfs_remove_link(&ep_dev->dev.parent->kobj, name); + sysfs_remove_group(&ep_dev->dev.kobj, &ep_dev_attr_grp); + endpoint_free_minor(ep_dev); + device_unregister(&ep_dev->dev); endpoint->ep_dev = NULL; destroy_endpoint_class(); } diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index afa2dd20332..10064af65d1 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -256,7 +256,9 @@ static const u8 hs_rh_config_descriptor [] = { 0x05, /* __u8 ep_bDescriptorType; Endpoint */ 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */ 0x03, /* __u8 ep_bmAttributes; Interrupt */ - 0x02, 0x00, /* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8) */ + /* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8) + * see hub.c:hub_configure() for details. */ + (USB_MAXCHILDREN + 1 + 7) / 8, 0x00, 0x0c /* __u8 ep_bInterval; (256ms -- usb 2.0 spec) */ }; diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index ad0ffbe8f7d..39186db1015 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -31,6 +31,47 @@ #include "hcd.h" #include "hub.h" +struct usb_hub { + struct device *intfdev; /* the "interface" device */ + struct usb_device *hdev; + struct urb *urb; /* for interrupt polling pipe */ + + /* buffer for urb ... with extra space in case of babble */ + char (*buffer)[8]; + dma_addr_t buffer_dma; /* DMA address for buffer */ + union { + struct usb_hub_status hub; + struct usb_port_status port; + } *status; /* buffer for status reports */ + + int error; /* last reported error */ + int nerrors; /* track consecutive errors */ + + struct list_head event_list; /* hubs w/data or errs ready */ + unsigned long event_bits[1]; /* status change bitmask */ + unsigned long change_bits[1]; /* ports with logical connect + status change */ + unsigned long busy_bits[1]; /* ports being reset or + resumed */ +#if USB_MAXCHILDREN > 31 /* 8*sizeof(unsigned long) - 1 */ +#error event_bits[] is too short! +#endif + + struct usb_hub_descriptor *descriptor; /* class descriptor */ + struct usb_tt tt; /* Transaction Translator */ + + unsigned mA_per_port; /* current for each child */ + + unsigned limited_power:1; + unsigned quiescing:1; + unsigned activating:1; + + unsigned has_indicators:1; + u8 indicator[USB_MAXCHILDREN]; + struct work_struct leds; +}; + + /* Protect struct usb_device->state and ->children members * Note: Both are also protected by ->dev.sem, except that ->state can * change to USB_STATE_NOTATTACHED even when the semaphore isn't held. */ @@ -45,6 +86,16 @@ static DECLARE_WAIT_QUEUE_HEAD(khubd_wait); static struct task_struct *khubd_task; +/* multithreaded probe logic */ +static int multithread_probe = +#ifdef CONFIG_USB_MULTITHREAD_PROBE + 1; +#else + 0; +#endif +module_param(multithread_probe, bool, S_IRUGO); +MODULE_PARM_DESC(multithread_probe, "Run each USB device probe in a new thread"); + /* cycle leds on hubs that aren't blinking for attention */ static int blinkenlights = 0; module_param (blinkenlights, bool, S_IRUGO); @@ -277,6 +328,9 @@ static void kick_khubd(struct usb_hub *hub) { unsigned long flags; + /* Suppress autosuspend until khubd runs */ + to_usb_interface(hub->intfdev)->pm_usage_cnt = 1; + spin_lock_irqsave(&hub_event_lock, flags); if (list_empty(&hub->event_list)) { list_add_tail(&hub->event_list, &hub_event_list); @@ -459,7 +513,6 @@ static void hub_quiesce(struct usb_hub *hub) /* (nonblocking) khubd and related activity won't re-trigger */ hub->quiescing = 1; hub->activating = 0; - hub->resume_root_hub = 0; /* (blocking) stop khubd and related activity */ usb_kill_urb(hub->urb); @@ -475,7 +528,7 @@ static void hub_activate(struct usb_hub *hub) hub->quiescing = 0; hub->activating = 1; - hub->resume_root_hub = 0; + status = usb_submit_urb(hub->urb, GFP_NOIO); if (status < 0) dev_err(hub->intfdev, "activate --> %d\n", status); @@ -761,7 +814,12 @@ static int hub_configure(struct usb_hub *hub, dev_dbg(hub_dev, "%sover-current condition exists\n", (hubstatus & HUB_STATUS_OVERCURRENT) ? "" : "no "); - /* set up the interrupt endpoint */ + /* set up the interrupt endpoint + * We use the EP's maxpacket size instead of (PORTS+1+7)/8 + * bytes as USB2.0[11.12.3] says because some hubs are known + * to send more data (and thus cause overflow). For root hubs, + * maxpktsize is defined in hcd.c's fake endpoint descriptors + * to be big enough for at least USB_MAXCHILDREN ports. */ pipe = usb_rcvintpipe(hdev, endpoint->bEndpointAddress); maxp = usb_maxpacket(hdev, pipe, usb_pipeout(pipe)); @@ -885,6 +943,7 @@ descriptor_error: INIT_DELAYED_WORK(&hub->leds, led_work); usb_set_intfdata (intf, hub); + intf->needs_remote_wakeup = 1; if (hdev->speed == USB_SPEED_HIGH) highspeed_hubs++; @@ -982,6 +1041,8 @@ static void recursively_mark_NOTATTACHED(struct usb_device *udev) if (udev->children[i]) recursively_mark_NOTATTACHED(udev->children[i]); } + if (udev->state == USB_STATE_SUSPENDED) + udev->discon_suspended = 1; udev->state = USB_STATE_NOTATTACHED; } @@ -1171,6 +1232,14 @@ void usb_disconnect(struct usb_device **pdev) *pdev = NULL; spin_unlock_irq(&device_state_lock); + /* Decrement the parent's count of unsuspended children */ + if (udev->parent) { + usb_pm_lock(udev); + if (!udev->discon_suspended) + usb_autosuspend_device(udev->parent); + usb_pm_unlock(udev); + } + put_device(&udev->dev); } @@ -1193,29 +1262,17 @@ static inline void show_string(struct usb_device *udev, char *id, char *string) static int __usb_port_suspend(struct usb_device *, int port1); #endif -/** - * usb_new_device - perform initial device setup (usbcore-internal) - * @udev: newly addressed device (in ADDRESS state) - * - * This is called with devices which have been enumerated, but not yet - * configured. The device descriptor is available, but not descriptors - * for any device configuration. The caller must have locked either - * the parent hub (if udev is a normal device) or else the - * usb_bus_list_lock (if udev is a root hub). The parent's pointer to - * udev has already been installed, but udev is not yet visible through - * sysfs or other filesystem code. - * - * Returns 0 for success (device is configured and listed, with its - * interfaces, in sysfs); else a negative errno value. - * - * This call is synchronous, and may not be used in an interrupt context. - * - * Only the hub driver or root-hub registrar should ever call this. - */ -int usb_new_device(struct usb_device *udev) +static int __usb_new_device(void *void_data) { + struct usb_device *udev = void_data; int err; + /* Lock ourself into memory in order to keep a probe sequence + * sleeping in a new thread from allowing us to be unloaded. + */ + if (!try_module_get(THIS_MODULE)) + return -EINVAL; + err = usb_get_configuration(udev); if (err < 0) { dev_err(&udev->dev, "can't read configurations, error %d\n", @@ -1311,13 +1368,56 @@ int usb_new_device(struct usb_device *udev) goto fail; } - return 0; + /* Increment the parent's count of unsuspended children */ + if (udev->parent) + usb_autoresume_device(udev->parent); + +exit: + module_put(THIS_MODULE); + return err; fail: usb_set_device_state(udev, USB_STATE_NOTATTACHED); - return err; + goto exit; } +/** + * usb_new_device - perform initial device setup (usbcore-internal) + * @udev: newly addressed device (in ADDRESS state) + * + * This is called with devices which have been enumerated, but not yet + * configured. The device descriptor is available, but not descriptors + * for any device configuration. The caller must have locked either + * the parent hub (if udev is a normal device) or else the + * usb_bus_list_lock (if udev is a root hub). The parent's pointer to + * udev has already been installed, but udev is not yet visible through + * sysfs or other filesystem code. + * + * The return value for this function depends on if the + * multithread_probe variable is set or not. If it's set, it will + * return a if the probe thread was successfully created or not. If the + * variable is not set, it will return if the device is configured + * properly or not. interfaces, in sysfs); else a negative errno value. + * + * This call is synchronous, and may not be used in an interrupt context. + * + * Only the hub driver or root-hub registrar should ever call this. + */ +int usb_new_device(struct usb_device *udev) +{ + struct task_struct *probe_task; + int ret = 0; + + if (multithread_probe) { + probe_task = kthread_run(__usb_new_device, udev, + "usb-probe-%s", udev->devnum); + if (IS_ERR(probe_task)) + ret = PTR_ERR(probe_task); + } else + ret = __usb_new_device(udev); + + return ret; +} static int hub_port_status(struct usb_hub *hub, int port1, u16 *status, u16 *change) @@ -1325,10 +1425,12 @@ static int hub_port_status(struct usb_hub *hub, int port1, int ret; ret = get_port_status(hub->hdev, port1, &hub->status->port); - if (ret < 0) + if (ret < 4) { dev_err (hub->intfdev, "%s failed (err = %d)\n", __FUNCTION__, ret); - else { + if (ret >= 0) + ret = -EIO; + } else { *status = le16_to_cpu(hub->status->port.wPortStatus); *change = le16_to_cpu(hub->status->port.wPortChange); ret = 0; @@ -1676,6 +1778,12 @@ static int hub_port_resume(struct usb_hub *hub, int port1, struct usb_device *udev) { int status; + u16 portchange, portstatus; + + /* Skip the initial Clear-Suspend step for a remote wakeup */ + status = hub_port_status(hub, port1, &portstatus, &portchange); + if (status == 0 && !(portstatus & USB_PORT_STAT_SUSPEND)) + goto SuspendCleared; // dev_dbg(hub->intfdev, "resume port %d\n", port1); @@ -1689,9 +1797,6 @@ hub_port_resume(struct usb_hub *hub, int port1, struct usb_device *udev) "can't resume port %d, status %d\n", port1, status); } else { - u16 devstatus; - u16 portchange; - /* drive resume for at least 20 msec */ if (udev) dev_dbg(&udev->dev, "usb %sresume\n", @@ -1706,16 +1811,15 @@ hub_port_resume(struct usb_hub *hub, int port1, struct usb_device *udev) * stop resume signaling. Then finish the resume * sequence. */ - devstatus = portchange = 0; - status = hub_port_status(hub, port1, - &devstatus, &portchange); + status = hub_port_status(hub, port1, &portstatus, &portchange); +SuspendCleared: if (status < 0 - || (devstatus & LIVE_FLAGS) != LIVE_FLAGS - || (devstatus & USB_PORT_STAT_SUSPEND) != 0 + || (portstatus & LIVE_FLAGS) != LIVE_FLAGS + || (portstatus & USB_PORT_STAT_SUSPEND) != 0 ) { dev_dbg(hub->intfdev, "port %d status %04x.%04x after resume, %d\n", - port1, portchange, devstatus, status); + port1, portchange, portstatus, status); if (status >= 0) status = -ENODEV; } else { @@ -1776,23 +1880,16 @@ static int remote_wakeup(struct usb_device *udev) { int status = 0; - /* All this just to avoid sending a port-resume message - * to the parent hub! */ - usb_lock_device(udev); - usb_pm_lock(udev); if (udev->state == USB_STATE_SUSPENDED) { dev_dbg(&udev->dev, "usb %sresume\n", "wakeup-"); - /* TRSMRCY = 10 msec */ - msleep(10); - status = finish_port_resume(udev); + status = usb_autoresume_device(udev); + + /* Give the interface drivers a chance to do something, + * then autosuspend the device again. */ if (status == 0) - udev->dev.power.power_state.event = PM_EVENT_ON; + usb_autosuspend_device(udev); } - usb_pm_unlock(udev); - - if (status == 0) - usb_autoresume_device(udev, 0); usb_unlock_device(udev); return status; } @@ -1856,6 +1953,8 @@ static int hub_suspend(struct usb_interface *intf, pm_message_t msg) } } + dev_dbg(&intf->dev, "%s\n", __FUNCTION__); + /* "global suspend" of the downstream HC-to-USB interface */ if (!hdev->parent) { struct usb_bus *bus = hdev->bus; @@ -1878,10 +1977,12 @@ static int hub_suspend(struct usb_interface *intf, pm_message_t msg) static int hub_resume(struct usb_interface *intf) { - struct usb_device *hdev = interface_to_usbdev(intf); struct usb_hub *hub = usb_get_intfdata (intf); + struct usb_device *hdev = hub->hdev; int status; + dev_dbg(&intf->dev, "%s\n", __FUNCTION__); + /* "global resume" of the downstream HC-to-USB interface */ if (!hdev->parent) { struct usb_bus *bus = hdev->bus; @@ -1920,7 +2021,6 @@ void usb_resume_root_hub(struct usb_device *hdev) { struct usb_hub *hub = hdev_to_hub(hdev); - hub->resume_root_hub = 1; kick_khubd(hub); } @@ -2557,16 +2657,13 @@ static void hub_events(void) intf = to_usb_interface(hub->intfdev); hub_dev = &intf->dev; - i = hub->resume_root_hub; - - dev_dbg(hub_dev, "state %d ports %d chg %04x evt %04x%s\n", + dev_dbg(hub_dev, "state %d ports %d chg %04x evt %04x\n", hdev->state, hub->descriptor ? hub->descriptor->bNbrPorts : 0, /* NOTE: expects max 15 ports... */ (u16) hub->change_bits[0], - (u16) hub->event_bits[0], - i ? ", resume root" : ""); + (u16) hub->event_bits[0]); usb_get_intf(intf); spin_unlock_irq(&hub_event_lock); @@ -2587,16 +2684,16 @@ static void hub_events(void) goto loop; } - /* Is this is a root hub wanting to reactivate the downstream - * ports? If so, be sure the interface resumes even if its - * stub "device" node was never suspended. - */ - if (i) - usb_autoresume_device(hdev, 0); + /* Autoresume */ + ret = usb_autopm_get_interface(intf); + if (ret) { + dev_dbg(hub_dev, "Can't autoresume: %d\n", ret); + goto loop; + } - /* If this is an inactive or suspended hub, do nothing */ + /* If this is an inactive hub, do nothing */ if (hub->quiescing) - goto loop; + goto loop_autopm; if (hub->error) { dev_dbg (hub_dev, "resetting for error %d\n", @@ -2606,7 +2703,7 @@ static void hub_events(void) if (ret) { dev_dbg (hub_dev, "error resetting hub: %d\n", ret); - goto loop; + goto loop_autopm; } hub->nerrors = 0; @@ -2734,6 +2831,10 @@ static void hub_events(void) if (!hdev->parent && !hub->busy_bits[0]) usb_enable_root_hub_irq(hdev->bus); +loop_autopm: + /* Allow autosuspend if we're not going to run again */ + if (list_empty(&hub->event_list)) + usb_autopm_enable(intf); loop: usb_unlock_device(hdev); usb_put_intf(intf); @@ -2775,6 +2876,7 @@ static struct usb_driver hub_driver = { .post_reset = hub_post_reset, .ioctl = hub_ioctl, .id_table = hub_id_table, + .supports_autosuspend = 1, }; int usb_hub_init(void) @@ -2999,7 +3101,7 @@ int usb_reset_composite_device(struct usb_device *udev, } /* Prevent autosuspend during the reset */ - usb_autoresume_device(udev, 1); + usb_autoresume_device(udev); if (iface && iface->condition != USB_INTERFACE_BINDING) iface = NULL; @@ -3042,7 +3144,7 @@ int usb_reset_composite_device(struct usb_device *udev, } } - usb_autosuspend_device(udev, 1); + usb_autosuspend_device(udev); return ret; } EXPORT_SYMBOL(usb_reset_composite_device); diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h index 035d3ef3588..cf9559c6c9b 100644 --- a/drivers/usb/core/hub.h +++ b/drivers/usb/core/hub.h @@ -192,45 +192,4 @@ struct usb_tt_clear { extern void usb_hub_tt_clear_buffer (struct usb_device *dev, int pipe); -struct usb_hub { - struct device *intfdev; /* the "interface" device */ - struct usb_device *hdev; - struct urb *urb; /* for interrupt polling pipe */ - - /* buffer for urb ... with extra space in case of babble */ - char (*buffer)[8]; - dma_addr_t buffer_dma; /* DMA address for buffer */ - union { - struct usb_hub_status hub; - struct usb_port_status port; - } *status; /* buffer for status reports */ - - int error; /* last reported error */ - int nerrors; /* track consecutive errors */ - - struct list_head event_list; /* hubs w/data or errs ready */ - unsigned long event_bits[1]; /* status change bitmask */ - unsigned long change_bits[1]; /* ports with logical connect - status change */ - unsigned long busy_bits[1]; /* ports being reset or - resumed */ -#if USB_MAXCHILDREN > 31 /* 8*sizeof(unsigned long) - 1 */ -#error event_bits[] is too short! -#endif - - struct usb_hub_descriptor *descriptor; /* class descriptor */ - struct usb_tt tt; /* Transaction Translator */ - - unsigned mA_per_port; /* current for each child */ - - unsigned limited_power:1; - unsigned quiescing:1; - unsigned activating:1; - unsigned resume_root_hub:1; - - unsigned has_indicators:1; - enum hub_led_mode indicator[USB_MAXCHILDREN]; - struct delayed_work leds; -}; - #endif /* __LINUX_HUB_H */ diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index 89572bc021b..7390b67c609 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -764,7 +764,7 @@ int usb_string(struct usb_device *dev, int index, char *buf, size_t size) err = -EINVAL; goto errout; } else { - dev->have_langid = -1; + dev->have_langid = 1; dev->string_langid = tbuf[2] | (tbuf[3]<< 8); /* always use the first langid listed */ dev_dbg (&dev->dev, "default language 0x%04x\n", @@ -1398,7 +1398,7 @@ free_interfaces: } /* Wake up the device so we can send it the Set-Config request */ - ret = usb_autoresume_device(dev, 1); + ret = usb_autoresume_device(dev); if (ret) goto free_interfaces; @@ -1421,7 +1421,7 @@ free_interfaces: dev->actconfig = cp; if (!cp) { usb_set_device_state(dev, USB_STATE_ADDRESS); - usb_autosuspend_device(dev, 1); + usb_autosuspend_device(dev); goto free_interfaces; } usb_set_device_state(dev, USB_STATE_CONFIGURED); @@ -1490,7 +1490,7 @@ free_interfaces: usb_create_sysfs_intf_files (intf); } - usb_autosuspend_device(dev, 1); + usb_autosuspend_device(dev); return 0; } diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index ab2f68fc7d2..02426d0b9a3 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -200,13 +200,6 @@ static void ksuspend_usb_cleanup(void) destroy_workqueue(ksuspend_usb_wq); } -#else - -#define ksuspend_usb_init() 0 -#define ksuspend_usb_cleanup() do {} while (0) - -#endif - #ifdef CONFIG_USB_SUSPEND /* usb_autosuspend_work - callback routine to autosuspend a USB device */ @@ -226,7 +219,14 @@ static void usb_autosuspend_work(struct work_struct *work) static void usb_autosuspend_work(struct work_struct *work) {} -#endif +#endif /* CONFIG_USB_SUSPEND */ + +#else + +#define ksuspend_usb_init() 0 +#define ksuspend_usb_cleanup() do {} while (0) + +#endif /* CONFIG_PM */ /** * usb_alloc_dev - usb device constructor (usbcore-internal) @@ -538,138 +538,6 @@ int usb_get_current_frame_number(struct usb_device *dev) return usb_hcd_get_frame_number (dev); } -/** - * usb_endpoint_dir_in - check if the endpoint has IN direction - * @epd: endpoint to be checked - * - * Returns true if the endpoint is of type IN, otherwise it returns false. - */ -int usb_endpoint_dir_in(const struct usb_endpoint_descriptor *epd) -{ - return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN); -} - -/** - * usb_endpoint_dir_out - check if the endpoint has OUT direction - * @epd: endpoint to be checked - * - * Returns true if the endpoint is of type OUT, otherwise it returns false. - */ -int usb_endpoint_dir_out(const struct usb_endpoint_descriptor *epd) -{ - return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT); -} - -/** - * usb_endpoint_xfer_bulk - check if the endpoint has bulk transfer type - * @epd: endpoint to be checked - * - * Returns true if the endpoint is of type bulk, otherwise it returns false. - */ -int usb_endpoint_xfer_bulk(const struct usb_endpoint_descriptor *epd) -{ - return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == - USB_ENDPOINT_XFER_BULK); -} - -/** - * usb_endpoint_xfer_int - check if the endpoint has interrupt transfer type - * @epd: endpoint to be checked - * - * Returns true if the endpoint is of type interrupt, otherwise it returns - * false. - */ -int usb_endpoint_xfer_int(const struct usb_endpoint_descriptor *epd) -{ - return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == - USB_ENDPOINT_XFER_INT); -} - -/** - * usb_endpoint_xfer_isoc - check if the endpoint has isochronous transfer type - * @epd: endpoint to be checked - * - * Returns true if the endpoint is of type isochronous, otherwise it returns - * false. - */ -int usb_endpoint_xfer_isoc(const struct usb_endpoint_descriptor *epd) -{ - return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == - USB_ENDPOINT_XFER_ISOC); -} - -/** - * usb_endpoint_is_bulk_in - check if the endpoint is bulk IN - * @epd: endpoint to be checked - * - * Returns true if the endpoint has bulk transfer type and IN direction, - * otherwise it returns false. - */ -int usb_endpoint_is_bulk_in(const struct usb_endpoint_descriptor *epd) -{ - return (usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_in(epd)); -} - -/** - * usb_endpoint_is_bulk_out - check if the endpoint is bulk OUT - * @epd: endpoint to be checked - * - * Returns true if the endpoint has bulk transfer type and OUT direction, - * otherwise it returns false. - */ -int usb_endpoint_is_bulk_out(const struct usb_endpoint_descriptor *epd) -{ - return (usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_out(epd)); -} - -/** - * usb_endpoint_is_int_in - check if the endpoint is interrupt IN - * @epd: endpoint to be checked - * - * Returns true if the endpoint has interrupt transfer type and IN direction, - * otherwise it returns false. - */ -int usb_endpoint_is_int_in(const struct usb_endpoint_descriptor *epd) -{ - return (usb_endpoint_xfer_int(epd) && usb_endpoint_dir_in(epd)); -} - -/** - * usb_endpoint_is_int_out - check if the endpoint is interrupt OUT - * @epd: endpoint to be checked - * - * Returns true if the endpoint has interrupt transfer type and OUT direction, - * otherwise it returns false. - */ -int usb_endpoint_is_int_out(const struct usb_endpoint_descriptor *epd) -{ - return (usb_endpoint_xfer_int(epd) && usb_endpoint_dir_out(epd)); -} - -/** - * usb_endpoint_is_isoc_in - check if the endpoint is isochronous IN - * @epd: endpoint to be checked - * - * Returns true if the endpoint has isochronous transfer type and IN direction, - * otherwise it returns false. - */ -int usb_endpoint_is_isoc_in(const struct usb_endpoint_descriptor *epd) -{ - return (usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_in(epd)); -} - -/** - * usb_endpoint_is_isoc_out - check if the endpoint is isochronous OUT - * @epd: endpoint to be checked - * - * Returns true if the endpoint has isochronous transfer type and OUT direction, - * otherwise it returns false. - */ -int usb_endpoint_is_isoc_out(const struct usb_endpoint_descriptor *epd) -{ - return (usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_out(epd)); -} - /*-------------------------------------------------------------------*/ /* * __usb_get_extra_descriptor() finds a descriptor of specific type in the @@ -1103,18 +971,6 @@ EXPORT_SYMBOL(__usb_get_extra_descriptor); EXPORT_SYMBOL(usb_find_device); EXPORT_SYMBOL(usb_get_current_frame_number); -EXPORT_SYMBOL_GPL(usb_endpoint_dir_in); -EXPORT_SYMBOL_GPL(usb_endpoint_dir_out); -EXPORT_SYMBOL_GPL(usb_endpoint_xfer_bulk); -EXPORT_SYMBOL_GPL(usb_endpoint_xfer_int); -EXPORT_SYMBOL_GPL(usb_endpoint_xfer_isoc); -EXPORT_SYMBOL_GPL(usb_endpoint_is_bulk_in); -EXPORT_SYMBOL_GPL(usb_endpoint_is_bulk_out); -EXPORT_SYMBOL_GPL(usb_endpoint_is_int_in); -EXPORT_SYMBOL_GPL(usb_endpoint_is_int_out); -EXPORT_SYMBOL_GPL(usb_endpoint_is_isoc_in); -EXPORT_SYMBOL_GPL(usb_endpoint_is_isoc_out); - EXPORT_SYMBOL (usb_buffer_alloc); EXPORT_SYMBOL (usb_buffer_free); diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h index 13322e33f91..17830a81be1 100644 --- a/drivers/usb/core/usb.h +++ b/drivers/usb/core/usb.h @@ -64,14 +64,13 @@ static inline void usb_pm_unlock(struct usb_device *udev) {} #define USB_AUTOSUSPEND_DELAY (HZ*2) -extern void usb_autosuspend_device(struct usb_device *udev, int dec_busy_cnt); -extern int usb_autoresume_device(struct usb_device *udev, int inc_busy_cnt); +extern void usb_autosuspend_device(struct usb_device *udev); +extern int usb_autoresume_device(struct usb_device *udev); #else -#define usb_autosuspend_device(udev, dec_busy_cnt) do {} while (0) -static inline int usb_autoresume_device(struct usb_device *udev, - int inc_busy_cnt) +#define usb_autosuspend_device(udev) do {} while (0) +static inline int usb_autoresume_device(struct usb_device *udev) { return 0; } diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c index 107119c5430..d15bf22b9a0 100644 --- a/drivers/usb/gadget/ether.c +++ b/drivers/usb/gadget/ether.c @@ -1894,13 +1894,13 @@ static int eth_start_xmit (struct sk_buff *skb, struct net_device *net) if (!eth_is_promisc (dev)) { u8 *dest = skb->data; - if (dest [0] & 0x01) { + if (is_multicast_ether_addr(dest)) { u16 type; /* ignores USB_CDC_PACKET_TYPE_MULTICAST and host * SET_ETHERNET_MULTICAST_FILTERS requests */ - if (memcmp (dest, net->broadcast, ETH_ALEN) == 0) + if (is_broadcast_ether_addr(dest)) type = USB_CDC_PACKET_TYPE_BROADCAST; else type = USB_CDC_PACKET_TYPE_ALL_MULTICAST; diff --git a/drivers/usb/gadget/lh7a40x_udc.c b/drivers/usb/gadget/lh7a40x_udc.c index 179259664c1..4a991564a03 100644 --- a/drivers/usb/gadget/lh7a40x_udc.c +++ b/drivers/usb/gadget/lh7a40x_udc.c @@ -83,7 +83,6 @@ static int lh7a40x_queue(struct usb_ep *ep, struct usb_request *, gfp_t); static int lh7a40x_dequeue(struct usb_ep *ep, struct usb_request *); static int lh7a40x_set_halt(struct usb_ep *ep, int); static int lh7a40x_fifo_status(struct usb_ep *ep); -static int lh7a40x_fifo_status(struct usb_ep *ep); static void lh7a40x_fifo_flush(struct usb_ep *ep); static void lh7a40x_ep0_kick(struct lh7a40x_udc *dev, struct lh7a40x_ep *ep); static void lh7a40x_handle_ep0(struct lh7a40x_udc *dev, u32 intr); diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c index 3acc896a5d4..0b590831582 100644 --- a/drivers/usb/gadget/net2280.c +++ b/drivers/usb/gadget/net2280.c @@ -1040,6 +1040,7 @@ net2280_queue (struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) } /* else the irq handler advances the queue. */ + ep->responded = 1; if (req) list_add_tail (&req->queue, &ep->queue); done: @@ -2188,7 +2189,8 @@ static void handle_ep_small (struct net2280_ep *ep) ep->stopped = 1; set_halt (ep); mode = 2; - } else if (!req && !ep->stopped) + } else if (ep->responded && + !req && !ep->stopped) write_fifo (ep, NULL); } } else { @@ -2203,7 +2205,7 @@ static void handle_ep_small (struct net2280_ep *ep) } else if (((t & (1 << DATA_OUT_PING_TOKEN_INTERRUPT)) && req && req->req.actual == req->req.length) - || !req) { + || (ep->responded && !req)) { ep->dev->protocol_stall = 1; set_halt (ep); ep->stopped = 1; @@ -2469,6 +2471,7 @@ static void handle_stat0_irqs (struct net2280 *dev, u32 stat) /* we made the hardware handle most lowlevel requests; * everything else goes uplevel to the gadget code. */ + ep->responded = 1; switch (u.r.bRequest) { case USB_REQ_GET_STATUS: { struct net2280_ep *e; @@ -2537,6 +2540,7 @@ delegate: u.r.bRequestType, u.r.bRequest, w_value, w_index, w_length, readl (&ep->regs->ep_cfg)); + ep->responded = 0; spin_unlock (&dev->lock); tmp = dev->driver->setup (&dev->gadget, &u.r); spin_lock (&dev->lock); diff --git a/drivers/usb/gadget/net2280.h b/drivers/usb/gadget/net2280.h index 957d6df3401..44ca139983d 100644 --- a/drivers/usb/gadget/net2280.h +++ b/drivers/usb/gadget/net2280.h @@ -110,7 +110,8 @@ struct net2280_ep { out_overflow : 1, stopped : 1, is_in : 1, - is_iso : 1; + is_iso : 1, + responded : 1; }; static inline void allow_status (struct net2280_ep *ep) diff --git a/drivers/usb/gadget/pxa2xx_udc.c b/drivers/usb/gadget/pxa2xx_udc.c index 671c24bc6d7..1ed506e9598 100644 --- a/drivers/usb/gadget/pxa2xx_udc.c +++ b/drivers/usb/gadget/pxa2xx_udc.c @@ -2472,6 +2472,7 @@ static struct pxa2xx_udc memory = { #define PXA210_B1 0x00000123 #define PXA210_B0 0x00000122 #define IXP425_A0 0x000001c1 +#define IXP425_B0 0x000001f1 #define IXP465_AD 0x00000200 /* @@ -2509,6 +2510,7 @@ static int __init pxa2xx_udc_probe(struct platform_device *pdev) break; #elif defined(CONFIG_ARCH_IXP4XX) case IXP425_A0: + case IXP425_B0: case IXP465_AD: dev->has_cfr = 1; out_dma = 0; diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index cf10cbc98f8..cc60759083b 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -153,7 +153,7 @@ config USB_U132_HCD adapter will *NOT* work with PC cards that do not contain an OHCI controller. - For those PC cards that contain multiple OHCI controllers only ther + For those PC cards that contain multiple OHCI controllers only the first one is used. The driver consists of two modules, the "ftdi-elan" module is a diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 9030994aba9..025d3331368 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -126,6 +126,11 @@ static unsigned park = 0; module_param (park, uint, S_IRUGO); MODULE_PARM_DESC (park, "park setting; 1-3 back-to-back async packets"); +/* for flakey hardware, ignore overcurrent indicators */ +static int ignore_oc = 0; +module_param (ignore_oc, bool, S_IRUGO); +MODULE_PARM_DESC (ignore_oc, "ignore bogus hardware overcurrent indications"); + #define INTR_MASK (STS_IAA | STS_FATAL | STS_PCD | STS_ERR | STS_INT) /*-------------------------------------------------------------------------*/ @@ -541,9 +546,10 @@ static int ehci_run (struct usb_hcd *hcd) temp = HC_VERSION(readl (&ehci->caps->hc_capbase)); ehci_info (ehci, - "USB %x.%x started, EHCI %x.%02x, driver %s\n", + "USB %x.%x started, EHCI %x.%02x, driver %s%s\n", ((ehci->sbrn & 0xf0)>>4), (ehci->sbrn & 0x0f), - temp >> 8, temp & 0xff, DRIVER_VERSION); + temp >> 8, temp & 0xff, DRIVER_VERSION, + ignore_oc ? ", overcurrent ignored" : ""); writel (INTR_MASK, &ehci->regs->intr_enable); /* Turn On Interrupts */ @@ -613,9 +619,8 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd) unsigned i = HCS_N_PORTS (ehci->hcs_params); /* resume root hub? */ - status = readl (&ehci->regs->command); - if (!(status & CMD_RUN)) - writel (status | CMD_RUN, &ehci->regs->command); + if (!(readl(&ehci->regs->command) & CMD_RUN)) + usb_hcd_resume_root_hub(hcd); while (i--) { int pstatus = readl (&ehci->regs->port_status [i]); @@ -632,7 +637,6 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd) */ ehci->reset_done [i] = jiffies + msecs_to_jiffies (20); ehci_dbg (ehci, "port %d remote wakeup\n", i + 1); - usb_hcd_resume_root_hub(hcd); } } diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index 1b20722c102..bfe5f307cba 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -34,6 +34,7 @@ static int ehci_bus_suspend (struct usb_hcd *hcd) { struct ehci_hcd *ehci = hcd_to_ehci (hcd); int port; + int mask; if (time_before (jiffies, ehci->next_statechange)) msleep(5); @@ -51,14 +52,25 @@ static int ehci_bus_suspend (struct usb_hcd *hcd) ehci->reclaim_ready = 1; ehci_work(ehci); - /* suspend any active/unsuspended ports, maybe allow wakeup */ + /* Unlike other USB host controller types, EHCI doesn't have + * any notion of "global" or bus-wide suspend. The driver has + * to manually suspend all the active unsuspended ports, and + * then manually resume them in the bus_resume() routine. + */ + ehci->bus_suspended = 0; while (port--) { u32 __iomem *reg = &ehci->regs->port_status [port]; u32 t1 = readl (reg) & ~PORT_RWC_BITS; u32 t2 = t1; - if ((t1 & PORT_PE) && !(t1 & PORT_OWNER)) + /* keep track of which ports we suspend */ + if ((t1 & PORT_PE) && !(t1 & PORT_OWNER) && + !(t1 & PORT_SUSPEND)) { t2 |= PORT_SUSPEND; + set_bit(port, &ehci->bus_suspended); + } + + /* enable remote wakeup on all ports */ if (device_may_wakeup(&hcd->self.root_hub->dev)) t2 |= PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E; else @@ -76,6 +88,13 @@ static int ehci_bus_suspend (struct usb_hcd *hcd) ehci_halt (ehci); hcd->state = HC_STATE_SUSPENDED; + /* allow remote wakeup */ + mask = INTR_MASK; + if (!device_may_wakeup(&hcd->self.root_hub->dev)) + mask &= ~STS_PCD; + writel(mask, &ehci->regs->intr_enable); + readl(&ehci->regs->intr_enable); + ehci->next_statechange = jiffies + msecs_to_jiffies(10); spin_unlock_irq (&ehci->lock); return 0; @@ -88,7 +107,6 @@ static int ehci_bus_resume (struct usb_hcd *hcd) struct ehci_hcd *ehci = hcd_to_ehci (hcd); u32 temp; int i; - int intr_enable; if (time_before (jiffies, ehci->next_statechange)) msleep(5); @@ -100,31 +118,30 @@ static int ehci_bus_resume (struct usb_hcd *hcd) * the last user of the controller, not reset/pm hardware keeping * state we gave to it. */ + temp = readl(&ehci->regs->intr_enable); + ehci_dbg(ehci, "resume root hub%s\n", temp ? "" : " after power loss"); - /* re-init operational registers in case we lost power */ - if (readl (&ehci->regs->intr_enable) == 0) { - /* at least some APM implementations will try to deliver - * IRQs right away, so delay them until we're ready. - */ - intr_enable = 1; - writel (0, &ehci->regs->segment); - writel (ehci->periodic_dma, &ehci->regs->frame_list); - writel ((u32)ehci->async->qh_dma, &ehci->regs->async_next); - } else - intr_enable = 0; - ehci_dbg(ehci, "resume root hub%s\n", - intr_enable ? " after power loss" : ""); + /* at least some APM implementations will try to deliver + * IRQs right away, so delay them until we're ready. + */ + writel(0, &ehci->regs->intr_enable); + + /* re-init operational registers */ + writel(0, &ehci->regs->segment); + writel(ehci->periodic_dma, &ehci->regs->frame_list); + writel((u32) ehci->async->qh_dma, &ehci->regs->async_next); /* restore CMD_RUN, framelist size, and irq threshold */ writel (ehci->command, &ehci->regs->command); - /* take ports out of suspend */ + /* manually resume the ports we suspended during bus_suspend() */ i = HCS_N_PORTS (ehci->hcs_params); while (i--) { temp = readl (&ehci->regs->port_status [i]); temp &= ~(PORT_RWC_BITS | PORT_WKOC_E | PORT_WKDISC_E | PORT_WKCONN_E); - if (temp & PORT_SUSPEND) { + if (test_bit(i, &ehci->bus_suspended) && + (temp & PORT_SUSPEND)) { ehci->reset_done [i] = jiffies + msecs_to_jiffies (20); temp |= PORT_RESUME; } @@ -134,11 +151,12 @@ static int ehci_bus_resume (struct usb_hcd *hcd) mdelay (20); while (i--) { temp = readl (&ehci->regs->port_status [i]); - if ((temp & PORT_SUSPEND) == 0) - continue; - temp &= ~(PORT_RWC_BITS | PORT_RESUME); - writel (temp, &ehci->regs->port_status [i]); - ehci_vdbg (ehci, "resumed port %d\n", i + 1); + if (test_bit(i, &ehci->bus_suspended) && + (temp & PORT_SUSPEND)) { + temp &= ~(PORT_RWC_BITS | PORT_RESUME); + writel (temp, &ehci->regs->port_status [i]); + ehci_vdbg (ehci, "resumed port %d\n", i + 1); + } } (void) readl (&ehci->regs->command); @@ -157,8 +175,7 @@ static int ehci_bus_resume (struct usb_hcd *hcd) hcd->state = HC_STATE_RUNNING; /* Now we can safely re-enable irqs */ - if (intr_enable) - writel (INTR_MASK, &ehci->regs->intr_enable); + writel(INTR_MASK, &ehci->regs->intr_enable); spin_unlock_irq (&ehci->lock); return 0; @@ -218,6 +235,7 @@ ehci_hub_status_data (struct usb_hcd *hcd, char *buf) { struct ehci_hcd *ehci = hcd_to_ehci (hcd); u32 temp, status = 0; + u32 mask; int ports, i, retval = 1; unsigned long flags; @@ -233,6 +251,18 @@ ehci_hub_status_data (struct usb_hcd *hcd, char *buf) retval++; } + /* Some boards (mostly VIA?) report bogus overcurrent indications, + * causing massive log spam unless we completely ignore them. It + * may be relevant that VIA VT8235 controlers, where PORT_POWER is + * always set, seem to clear PORT_OCC and PORT_CSC when writing to + * PORT_POWER; that's surprising, but maybe within-spec. + */ + if (!ignore_oc) + mask = PORT_CSC | PORT_PEC | PORT_OCC; + else + mask = PORT_CSC | PORT_PEC; + // PORT_RESUME from hardware ~= PORT_STAT_C_SUSPEND + /* no hub change reports (bit 0) for now (power, ...) */ /* port N changes (bit N)? */ @@ -250,8 +280,7 @@ ehci_hub_status_data (struct usb_hcd *hcd, char *buf) } if (!(temp & PORT_CONNECT)) ehci->reset_done [i] = 0; - if ((temp & (PORT_CSC | PORT_PEC | PORT_OCC)) != 0 - // PORT_STAT_C_SUSPEND? + if ((temp & mask) != 0 || ((temp & PORT_RESUME) != 0 && time_after (jiffies, ehci->reset_done [i]))) { @@ -319,6 +348,7 @@ static int ehci_hub_control ( u32 temp, status; unsigned long flags; int retval = 0; + unsigned selector; /* * FIXME: support SetPortFeatures USB_PORT_FEAT_INDICATOR. @@ -417,7 +447,7 @@ static int ehci_hub_control ( status |= 1 << USB_PORT_FEAT_C_CONNECTION; if (temp & PORT_PEC) status |= 1 << USB_PORT_FEAT_C_ENABLE; - if (temp & PORT_OCC) + if ((temp & PORT_OCC) && !ignore_oc) status |= 1 << USB_PORT_FEAT_C_OVER_CURRENT; /* whoever resumes must GetPortStatus to complete it!! */ @@ -506,6 +536,8 @@ static int ehci_hub_control ( } break; case SetPortFeature: + selector = wIndex >> 8; + wIndex &= 0xff; if (!wIndex || wIndex > ports) goto error; wIndex--; @@ -559,6 +591,22 @@ static int ehci_hub_control ( } writel (temp, &ehci->regs->port_status [wIndex]); break; + + /* For downstream facing ports (these): one hub port is put + * into test mode according to USB2 11.24.2.13, then the hub + * must be reset (which for root hub now means rmmod+modprobe, + * or else system reboot). See EHCI 2.3.9 and 4.14 for info + * about the EHCI-specific stuff. + */ + case USB_PORT_FEAT_TEST: + if (!selector || selector > 5) + goto error; + ehci_quiesce(ehci); + ehci_halt(ehci); + temp |= selector << 16; + writel (temp, &ehci->regs->port_status [wIndex]); + break; + default: goto error; } diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index e51c1ed81ac..4bc7970ba3e 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -257,9 +257,7 @@ static int ehci_pci_suspend(struct usb_hcd *hcd, pm_message_t message) static int ehci_pci_resume(struct usb_hcd *hcd) { struct ehci_hcd *ehci = hcd_to_ehci(hcd); - unsigned port; struct pci_dev *pdev = to_pci_dev(hcd->self.controller); - int retval = -EINVAL; // maybe restore FLADJ @@ -269,27 +267,19 @@ static int ehci_pci_resume(struct usb_hcd *hcd) /* Mark hardware accessible again as we are out of D3 state by now */ set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); - /* If CF is clear, we lost PCI Vaux power and need to restart. */ - if (readl(&ehci->regs->configured_flag) != FLAG_CF) - goto restart; - - /* If any port is suspended (or owned by the companion), - * we know we can/must resume the HC (and mustn't reset it). - * We just defer that to the root hub code. + /* If CF is still set, we maintained PCI Vaux power. + * Just undo the effect of ehci_pci_suspend(). */ - for (port = HCS_N_PORTS(ehci->hcs_params); port > 0; ) { - u32 status; - port--; - status = readl(&ehci->regs->port_status [port]); - if (!(status & PORT_POWER)) - continue; - if (status & (PORT_SUSPEND | PORT_RESUME | PORT_OWNER)) { - usb_hcd_resume_root_hub(hcd); - return 0; - } + if (readl(&ehci->regs->configured_flag) == FLAG_CF) { + int mask = INTR_MASK; + + if (!device_may_wakeup(&hcd->self.root_hub->dev)) + mask &= ~STS_PCD; + writel(mask, &ehci->regs->intr_enable); + readl(&ehci->regs->intr_enable); + return 0; } -restart: ehci_dbg(ehci, "lost power, restarting\n"); usb_root_hub_lost_power(hcd->self.root_hub); @@ -307,13 +297,15 @@ restart: ehci_work(ehci); spin_unlock_irq(&ehci->lock); - /* restart; khubd will disconnect devices */ - retval = ehci_run(hcd); - /* here we "know" root ports should always stay powered */ ehci_port_power(ehci, 1); - return retval; + writel(ehci->command, &ehci->regs->command); + writel(FLAG_CF, &ehci->regs->configured_flag); + readl(&ehci->regs->command); /* unblock posted writes */ + + hcd->state = HC_STATE_SUSPENDED; + return 0; } #endif diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index bbc3082a73d..74dbc6c8228 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -74,6 +74,7 @@ struct ehci_hcd { /* one per controller */ /* per root hub port */ unsigned long reset_done [EHCI_MAX_ROOT_PORTS]; + unsigned long bus_suspended; /* per-HC memory pools (could be per-bus, but ...) */ struct dma_pool *qh_pool; /* qh per active urb */ diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index ea4714e557e..a95275a401b 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -729,6 +729,16 @@ static irqreturn_t ohci_irq (struct usb_hcd *hcd) ohci->next_statechange = jiffies + STATECHANGE_DELAY; ohci_writel(ohci, OHCI_INTR_RD | OHCI_INTR_RHSC, ®s->intrstatus); + + /* NOTE: Vendors didn't always make the same implementation + * choices for RHSC. Many followed the spec; RHSC triggers + * on an edge, like setting and maybe clearing a port status + * change bit. With others it's level-triggered, active + * until khubd clears all the port status change bits. We'll + * always disable it here and rely on polling until khubd + * re-enables it. + */ + ohci_writel(ohci, OHCI_INTR_RHSC, ®s->intrdisable); usb_hcd_poll_rh_status(hcd); } diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c index 6995ea36f2e..2441642cb7b 100644 --- a/drivers/usb/host/ohci-hub.c +++ b/drivers/usb/host/ohci-hub.c @@ -41,7 +41,11 @@ static void ohci_rhsc_enable (struct usb_hcd *hcd) { struct ohci_hcd *ohci = hcd_to_ohci (hcd); - ohci_writel (ohci, OHCI_INTR_RHSC, &ohci->regs->intrenable); + spin_lock_irq(&ohci->lock); + if (!ohci->autostop) + del_timer(&hcd->rh_timer); /* Prevent next poll */ + ohci_writel(ohci, OHCI_INTR_RHSC, &ohci->regs->intrenable); + spin_unlock_irq(&ohci->lock); } #define OHCI_SCHED_ENABLES \ @@ -50,6 +54,9 @@ static void ohci_rhsc_enable (struct usb_hcd *hcd) static void dl_done_list (struct ohci_hcd *); static void finish_unlinks (struct ohci_hcd *, u16); +#ifdef CONFIG_PM +static int ohci_restart(struct ohci_hcd *ohci); + static int ohci_rh_suspend (struct ohci_hcd *ohci, int autostop) __releases(ohci->lock) __acquires(ohci->lock) @@ -132,8 +139,6 @@ static inline struct ed *find_head (struct ed *ed) return ed; } -static int ohci_restart (struct ohci_hcd *ohci); - /* caller has locked the root hub */ static int ohci_rh_resume (struct ohci_hcd *ohci) __releases(ohci->lock) @@ -169,7 +174,7 @@ __acquires(ohci->lock) break; case OHCI_USB_RESUME: /* HCFS changes sometime after INTR_RD */ - ohci_info(ohci, "%swakeup\n", + ohci_dbg(ohci, "%swakeup root hub\n", autostopped ? "auto-" : ""); break; case OHCI_USB_OPER: @@ -181,7 +186,6 @@ __acquires(ohci->lock) ohci_dbg (ohci, "lost power\n"); status = -EBUSY; } -#ifdef CONFIG_PM if (status == -EBUSY) { if (!autostopped) { spin_unlock_irq (&ohci->lock); @@ -191,25 +195,12 @@ __acquires(ohci->lock) } return status; } -#endif if (status != -EINPROGRESS) return status; if (autostopped) goto skip_resume; spin_unlock_irq (&ohci->lock); - temp = ohci->num_ports; - while (temp--) { - u32 stat = ohci_readl (ohci, - &ohci->regs->roothub.portstatus [temp]); - - /* force global, not selective, resume */ - if (!(stat & RH_PS_PSS)) - continue; - ohci_writel (ohci, RH_PS_POCI, - &ohci->regs->roothub.portstatus [temp]); - } - /* Some controllers (lucent erratum) need extra-long delays */ msleep (20 /* usb 11.5.1.10 */ + 12 /* 32 msec counter */ + 1); @@ -217,6 +208,7 @@ __acquires(ohci->lock) temp &= OHCI_CTRL_HCFS; if (temp != OHCI_USB_RESUME) { ohci_err (ohci, "controller won't resume\n"); + spin_lock_irq(&ohci->lock); return -EBUSY; } @@ -296,8 +288,6 @@ skip_resume: return 0; } -#ifdef CONFIG_PM - static int ohci_bus_suspend (struct usb_hcd *hcd) { struct ohci_hcd *ohci = hcd_to_ohci (hcd); @@ -335,6 +325,83 @@ static int ohci_bus_resume (struct usb_hcd *hcd) return rc; } +/* Carry out polling-, autostop-, and autoresume-related state changes */ +static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed, + int any_connected) +{ + int poll_rh = 1; + + switch (ohci->hc_control & OHCI_CTRL_HCFS) { + + case OHCI_USB_OPER: + /* keep on polling until we know a device is connected + * and RHSC is enabled */ + if (!ohci->autostop) { + if (any_connected || + !device_may_wakeup(&ohci_to_hcd(ohci) + ->self.root_hub->dev)) { + if (ohci_readl(ohci, &ohci->regs->intrenable) & + OHCI_INTR_RHSC) + poll_rh = 0; + } else { + ohci->autostop = 1; + ohci->next_statechange = jiffies + HZ; + } + + /* if no devices have been attached for one second, autostop */ + } else { + if (changed || any_connected) { + ohci->autostop = 0; + ohci->next_statechange = jiffies + + STATECHANGE_DELAY; + } else if (time_after_eq(jiffies, + ohci->next_statechange) + && !ohci->ed_rm_list + && !(ohci->hc_control & + OHCI_SCHED_ENABLES)) { + ohci_rh_suspend(ohci, 1); + } + } + break; + + /* if there is a port change, autostart or ask to be resumed */ + case OHCI_USB_SUSPEND: + case OHCI_USB_RESUME: + if (changed) { + if (ohci->autostop) + ohci_rh_resume(ohci); + else + usb_hcd_resume_root_hub(ohci_to_hcd(ohci)); + } else { + /* everything is idle, no need for polling */ + poll_rh = 0; + } + break; + } + return poll_rh; +} + +#else /* CONFIG_PM */ + +static inline int ohci_rh_resume(struct ohci_hcd *ohci) +{ + return 0; +} + +/* Carry out polling-related state changes. + * autostop isn't used when CONFIG_PM is turned off. + */ +static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed, + int any_connected) +{ + int poll_rh = 1; + + /* keep on polling until RHSC is enabled */ + if (ohci_readl(ohci, &ohci->regs->intrenable) & OHCI_INTR_RHSC) + poll_rh = 0; + return poll_rh; +} + #endif /* CONFIG_PM */ /*-------------------------------------------------------------------------*/ @@ -346,7 +413,7 @@ ohci_hub_status_data (struct usb_hcd *hcd, char *buf) { struct ohci_hcd *ohci = hcd_to_ohci (hcd); int i, changed = 0, length = 1; - int any_connected = 0, rhsc_enabled = 1; + int any_connected = 0; unsigned long flags; spin_lock_irqsave (&ohci->lock, flags); @@ -387,67 +454,8 @@ ohci_hub_status_data (struct usb_hcd *hcd, char *buf) } } - /* NOTE: vendors didn't always make the same implementation - * choices for RHSC. Sometimes it triggers on an edge (like - * setting and maybe clearing a port status change bit); and - * it's level-triggered on other silicon, active until khubd - * clears all active port status change bits. If it's still - * set (level-triggered) we must disable it and rely on - * polling until khubd re-enables it. - */ - if (ohci_readl (ohci, &ohci->regs->intrstatus) & OHCI_INTR_RHSC) { - ohci_writel (ohci, OHCI_INTR_RHSC, &ohci->regs->intrdisable); - (void) ohci_readl (ohci, &ohci->regs->intrdisable); - rhsc_enabled = 0; - } - hcd->poll_rh = 1; - - /* carry out appropriate state changes */ - switch (ohci->hc_control & OHCI_CTRL_HCFS) { - - case OHCI_USB_OPER: - /* keep on polling until we know a device is connected - * and RHSC is enabled */ - if (!ohci->autostop) { - if (any_connected) { - if (rhsc_enabled) - hcd->poll_rh = 0; - } else { - ohci->autostop = 1; - ohci->next_statechange = jiffies + HZ; - } - - /* if no devices have been attached for one second, autostop */ - } else { - if (changed || any_connected) { - ohci->autostop = 0; - ohci->next_statechange = jiffies + - STATECHANGE_DELAY; - } else if (device_may_wakeup(&hcd->self.root_hub->dev) - && time_after_eq(jiffies, - ohci->next_statechange) - && !ohci->ed_rm_list - && !(ohci->hc_control & - OHCI_SCHED_ENABLES)) { - ohci_rh_suspend (ohci, 1); - } - } - break; - - /* if there is a port change, autostart or ask to be resumed */ - case OHCI_USB_SUSPEND: - case OHCI_USB_RESUME: - if (changed) { - if (ohci->autostop) - ohci_rh_resume (ohci); - else - usb_hcd_resume_root_hub (hcd); - } else { - /* everything is idle, no need for polling */ - hcd->poll_rh = 0; - } - break; - } + hcd->poll_rh = ohci_root_hub_state_changes(ohci, changed, + any_connected); done: spin_unlock_irqrestore (&ohci->lock, flags); diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c index 4f95a249c91..a9d7119e317 100644 --- a/drivers/usb/host/u132-hcd.c +++ b/drivers/usb/host/u132-hcd.c @@ -71,7 +71,7 @@ static int distrust_firmware = 1; module_param(distrust_firmware, bool, 0); MODULE_PARM_DESC(distrust_firmware, "true to distrust firmware power/overcurren" "t setup"); -DECLARE_WAIT_QUEUE_HEAD(u132_hcd_wait); +static DECLARE_WAIT_QUEUE_HEAD(u132_hcd_wait); /* * u132_module_lock exists to protect access to global variables * @@ -205,13 +205,9 @@ struct u132 { struct u132_port port[MAX_U132_PORTS]; struct u132_endp *endp[MAX_U132_ENDPS]; }; -int usb_ftdi_elan_read_reg(struct platform_device *pdev, u32 *data); -int usb_ftdi_elan_read_pcimem(struct platform_device *pdev, u8 addressofs, - u8 width, u32 *data); -int usb_ftdi_elan_write_pcimem(struct platform_device *pdev, u8 addressofs, - u8 width, u32 data); + /* -* these can not be inlines because we need the structure offset!! +* these cannot be inlines because we need the structure offset!! * Does anyone have a better way????? */ #define u132_read_pcimem(u132, member, data) \ @@ -3031,7 +3027,7 @@ static struct hc_driver u132_hc_driver = { * This function may be called by the USB core whilst the "usb_all_devices_rwsem" * is held for writing, thus this module must not call usb_remove_hcd() * synchronously - but instead should immediately stop activity to the -* device and ansynchronously call usb_remove_hcd() +* device and asynchronously call usb_remove_hcd() */ static int __devexit u132_remove(struct platform_device *pdev) { @@ -3227,7 +3223,7 @@ static int u132_resume(struct platform_device *pdev) #define u132_resume NULL #endif /* -* this driver is loaded explicitely by ftdi_u132 +* this driver is loaded explicitly by ftdi_u132 * * the platform_driver struct is static because it is per type of module */ diff --git a/drivers/usb/image/microtek.c b/drivers/usb/image/microtek.c index 3038ed0700d..8ccddf74534 100644 --- a/drivers/usb/image/microtek.c +++ b/drivers/usb/image/microtek.c @@ -796,7 +796,7 @@ static int mts_usb_probe(struct usb_interface *intf, new_desc->context.scsi_status = kmalloc(1, GFP_KERNEL); if (!new_desc->context.scsi_status) - goto out_kfree2; + goto out_free_urb; new_desc->usb_dev = dev; new_desc->usb_intf = intf; @@ -822,18 +822,20 @@ static int mts_usb_probe(struct usb_interface *intf, new_desc->host = scsi_host_alloc(&mts_scsi_host_template, sizeof(new_desc)); if (!new_desc->host) - goto out_free_urb; + goto out_kfree2; new_desc->host->hostdata[0] = (unsigned long)new_desc; if (scsi_add_host(new_desc->host, NULL)) { err_retval = -EIO; - goto out_free_urb; + goto out_host_put; } scsi_scan_host(new_desc->host); usb_set_intfdata(intf, new_desc); return 0; + out_host_put: + scsi_host_put(new_desc->host); out_kfree2: kfree(new_desc->context.scsi_status); out_free_urb: diff --git a/drivers/usb/input/Kconfig b/drivers/usb/input/Kconfig index 20db36448ab..661af7aa623 100644 --- a/drivers/usb/input/Kconfig +++ b/drivers/usb/input/Kconfig @@ -221,6 +221,7 @@ config USB_TOUCHSCREEN - ITM - some other eTurboTouch - Gunze AHL61 + - DMC TSC-10/25 Have a look at <http://linux.chapter7.ch/touchkit/> for a usage description and the required user-space stuff. @@ -258,6 +259,11 @@ config USB_TOUCHSCREEN_GUNZE bool "Gunze AHL61 device support" if EMBEDDED depends on USB_TOUCHSCREEN +config USB_TOUCHSCREEN_DMC_TSC10 + default y + bool "DMC TSC-10/25 device support" if EMBEDDED + depends on USB_TOUCHSCREEN + config USB_YEALINK tristate "Yealink usb-p1k voip phone" depends on USB && INPUT && EXPERIMENTAL diff --git a/drivers/usb/input/ati_remote.c b/drivers/usb/input/ati_remote.c index f659f3028ad..ff23318dc30 100644 --- a/drivers/usb/input/ati_remote.c +++ b/drivers/usb/input/ati_remote.c @@ -630,19 +630,14 @@ static int ati_remote_alloc_buffers(struct usb_device *udev, */ static void ati_remote_free_buffers(struct ati_remote *ati_remote) { - if (ati_remote->irq_urb) - usb_free_urb(ati_remote->irq_urb); + usb_free_urb(ati_remote->irq_urb); + usb_free_urb(ati_remote->out_urb); - if (ati_remote->out_urb) - usb_free_urb(ati_remote->out_urb); + usb_buffer_free(ati_remote->udev, DATA_BUFSIZE, + ati_remote->inbuf, ati_remote->inbuf_dma); - if (ati_remote->inbuf) - usb_buffer_free(ati_remote->udev, DATA_BUFSIZE, - ati_remote->inbuf, ati_remote->inbuf_dma); - - if (ati_remote->outbuf) - usb_buffer_free(ati_remote->udev, DATA_BUFSIZE, - ati_remote->inbuf, ati_remote->outbuf_dma); + usb_buffer_free(ati_remote->udev, DATA_BUFSIZE, + ati_remote->outbuf, ati_remote->outbuf_dma); } static void ati_remote_input_init(struct ati_remote *ati_remote) diff --git a/drivers/usb/input/ati_remote2.c b/drivers/usb/input/ati_remote2.c index f982a2b4a7f..83f1f79db7c 100644 --- a/drivers/usb/input/ati_remote2.c +++ b/drivers/usb/input/ati_remote2.c @@ -372,8 +372,7 @@ static void ati_remote2_urb_cleanup(struct ati_remote2 *ar2) int i; for (i = 0; i < 2; i++) { - if (ar2->urb[i]) - usb_free_urb(ar2->urb[i]); + usb_free_urb(ar2->urb[i]); if (ar2->buf[i]) usb_buffer_free(ar2->udev, 4, ar2->buf[i], ar2->buf_dma[i]); diff --git a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c index ebc9e823a46..4295bab4f1e 100644 --- a/drivers/usb/input/hid-core.c +++ b/drivers/usb/input/hid-core.c @@ -968,21 +968,30 @@ static void hid_retry_timeout(unsigned long _hid) hid_io_error(hid); } -/* Workqueue routine to reset the device */ +/* Workqueue routine to reset the device or clear a halt */ static void hid_reset(struct work_struct *work) { struct hid_device *hid = container_of(work, struct hid_device, reset_work); - int rc_lock, rc; - - dev_dbg(&hid->intf->dev, "resetting device\n"); - rc = rc_lock = usb_lock_device_for_reset(hid->dev, hid->intf); - if (rc_lock >= 0) { - rc = usb_reset_composite_device(hid->dev, hid->intf); - if (rc_lock) - usb_unlock_device(hid->dev); + int rc_lock, rc = 0; + + if (test_bit(HID_CLEAR_HALT, &hid->iofl)) { + dev_dbg(&hid->intf->dev, "clear halt\n"); + rc = usb_clear_halt(hid->dev, hid->urbin->pipe); + clear_bit(HID_CLEAR_HALT, &hid->iofl); + hid_start_in(hid); + } + + else if (test_bit(HID_RESET_PENDING, &hid->iofl)) { + dev_dbg(&hid->intf->dev, "resetting device\n"); + rc = rc_lock = usb_lock_device_for_reset(hid->dev, hid->intf); + if (rc_lock >= 0) { + rc = usb_reset_composite_device(hid->dev, hid->intf); + if (rc_lock) + usb_unlock_device(hid->dev); + } + clear_bit(HID_RESET_PENDING, &hid->iofl); } - clear_bit(HID_RESET_PENDING, &hid->iofl); switch (rc) { case 0: @@ -1024,9 +1033,8 @@ static void hid_io_error(struct hid_device *hid) /* Retries failed, so do a port reset */ if (!test_and_set_bit(HID_RESET_PENDING, &hid->iofl)) { - if (schedule_work(&hid->reset_work)) - goto done; - clear_bit(HID_RESET_PENDING, &hid->iofl); + schedule_work(&hid->reset_work); + goto done; } } @@ -1050,6 +1058,11 @@ static void hid_irq_in(struct urb *urb) hid->retry_delay = 0; hid_input_report(HID_INPUT_REPORT, urb, 1); break; + case -EPIPE: /* stall */ + clear_bit(HID_IN_RUNNING, &hid->iofl); + set_bit(HID_CLEAR_HALT, &hid->iofl); + schedule_work(&hid->reset_work); + return; case -ECONNRESET: /* unlink */ case -ENOENT: case -ESHUTDOWN: /* unplug */ @@ -1628,6 +1641,19 @@ void hid_init_reports(struct hid_device *hid) #define USB_VENDOR_ID_APPLE 0x05ac #define USB_DEVICE_ID_APPLE_MIGHTYMOUSE 0x0304 +#define USB_DEVICE_ID_APPLE_FOUNTAIN_ANSI 0x020e +#define USB_DEVICE_ID_APPLE_FOUNTAIN_ISO 0x020f +#define USB_DEVICE_ID_APPLE_GEYSER_ANSI 0x0214 +#define USB_DEVICE_ID_APPLE_GEYSER_ISO 0x0215 +#define USB_DEVICE_ID_APPLE_GEYSER_JIS 0x0216 +#define USB_DEVICE_ID_APPLE_GEYSER3_ANSI 0x0217 +#define USB_DEVICE_ID_APPLE_GEYSER3_ISO 0x0218 +#define USB_DEVICE_ID_APPLE_GEYSER3_JIS 0x0219 +#define USB_DEVICE_ID_APPLE_GEYSER4_ANSI 0x021a +#define USB_DEVICE_ID_APPLE_GEYSER4_ISO 0x021b +#define USB_DEVICE_ID_APPLE_GEYSER4_JIS 0x021c +#define USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY 0x030a +#define USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY 0x030b #define USB_VENDOR_ID_CHERRY 0x046a #define USB_DEVICE_ID_CHERRY_CYMOTION 0x0023 @@ -1795,17 +1821,19 @@ static const struct hid_blacklist { { USB_VENDOR_ID_CHERRY, USB_DEVICE_ID_CHERRY_CYMOTION, HID_QUIRK_CYMOTION }, - { USB_VENDOR_ID_APPLE, 0x020E, HID_QUIRK_POWERBOOK_HAS_FN }, - { USB_VENDOR_ID_APPLE, 0x020F, HID_QUIRK_POWERBOOK_HAS_FN }, - { USB_VENDOR_ID_APPLE, 0x0214, HID_QUIRK_POWERBOOK_HAS_FN }, - { USB_VENDOR_ID_APPLE, 0x0215, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_POWERBOOK_ISO_KEYBOARD}, - { USB_VENDOR_ID_APPLE, 0x0216, HID_QUIRK_POWERBOOK_HAS_FN }, - { USB_VENDOR_ID_APPLE, 0x0217, HID_QUIRK_POWERBOOK_HAS_FN }, - { USB_VENDOR_ID_APPLE, 0x0218, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_POWERBOOK_ISO_KEYBOARD}, - { USB_VENDOR_ID_APPLE, 0x0219, HID_QUIRK_POWERBOOK_HAS_FN }, - { USB_VENDOR_ID_APPLE, 0x021B, HID_QUIRK_POWERBOOK_HAS_FN }, - { USB_VENDOR_ID_APPLE, 0x030A, HID_QUIRK_POWERBOOK_HAS_FN }, - { USB_VENDOR_ID_APPLE, 0x030B, HID_QUIRK_POWERBOOK_HAS_FN }, + { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_ANSI, HID_QUIRK_POWERBOOK_HAS_FN }, + { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_ISO, HID_QUIRK_POWERBOOK_HAS_FN }, + { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER_ANSI, HID_QUIRK_POWERBOOK_HAS_FN }, + { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER_ISO, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_POWERBOOK_ISO_KEYBOARD}, + { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER_JIS, HID_QUIRK_POWERBOOK_HAS_FN }, + { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER3_ANSI, HID_QUIRK_POWERBOOK_HAS_FN }, + { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER3_ISO, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_POWERBOOK_ISO_KEYBOARD}, + { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER3_JIS, HID_QUIRK_POWERBOOK_HAS_FN }, + { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_ANSI, HID_QUIRK_POWERBOOK_HAS_FN }, + { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_ISO, HID_QUIRK_POWERBOOK_HAS_FN }, + { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_JIS, HID_QUIRK_POWERBOOK_HAS_FN }, + { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY, HID_QUIRK_POWERBOOK_HAS_FN }, + { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY, HID_QUIRK_POWERBOOK_HAS_FN }, { USB_VENDOR_ID_PANJIT, 0x0001, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_PANJIT, 0x0002, HID_QUIRK_IGNORE }, @@ -1986,7 +2014,7 @@ static struct hid_device *usb_hid_configure(struct usb_interface *intf) if (hid->collection->usage == HID_GD_MOUSE && hid_mousepoll_interval > 0) interval = hid_mousepoll_interval; - if (endpoint->bEndpointAddress & USB_DIR_IN) { + if (usb_endpoint_dir_in(endpoint)) { if (hid->urbin) continue; if (!(hid->urbin = usb_alloc_urb(0, GFP_KERNEL))) @@ -2068,13 +2096,9 @@ static struct hid_device *usb_hid_configure(struct usb_interface *intf) return hid; fail: - - if (hid->urbin) - usb_free_urb(hid->urbin); - if (hid->urbout) - usb_free_urb(hid->urbout); - if (hid->urbctrl) - usb_free_urb(hid->urbctrl); + usb_free_urb(hid->urbin); + usb_free_urb(hid->urbout); + usb_free_urb(hid->urbctrl); hid_free_buffers(dev, hid); hid_free_device(hid); @@ -2105,8 +2129,7 @@ static void hid_disconnect(struct usb_interface *intf) usb_free_urb(hid->urbin); usb_free_urb(hid->urbctrl); - if (hid->urbout) - usb_free_urb(hid->urbout); + usb_free_urb(hid->urbout); hid_free_buffers(hid->dev, hid); hid_free_device(hid); diff --git a/drivers/usb/input/hid.h b/drivers/usb/input/hid.h index 0e76e6dcac3..2a9bf07944c 100644 --- a/drivers/usb/input/hid.h +++ b/drivers/usb/input/hid.h @@ -385,6 +385,7 @@ struct hid_control_fifo { #define HID_IN_RUNNING 3 #define HID_RESET_PENDING 4 #define HID_SUSPENDED 5 +#define HID_CLEAR_HALT 6 struct hid_input { struct list_head list; diff --git a/drivers/usb/input/usbkbd.c b/drivers/usb/input/usbkbd.c index c73285cf855..dac88640eab 100644 --- a/drivers/usb/input/usbkbd.c +++ b/drivers/usb/input/usbkbd.c @@ -208,10 +208,8 @@ static int usb_kbd_alloc_mem(struct usb_device *dev, struct usb_kbd *kbd) static void usb_kbd_free_mem(struct usb_device *dev, struct usb_kbd *kbd) { - if (kbd->irq) - usb_free_urb(kbd->irq); - if (kbd->led) - usb_free_urb(kbd->led); + usb_free_urb(kbd->irq); + usb_free_urb(kbd->led); if (kbd->new) usb_buffer_free(dev, 8, kbd->new, kbd->new_dma); if (kbd->cr) @@ -236,9 +234,7 @@ static int usb_kbd_probe(struct usb_interface *iface, return -ENODEV; endpoint = &interface->endpoint[0].desc; - if (!(endpoint->bEndpointAddress & USB_DIR_IN)) - return -ENODEV; - if ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_INT) + if (!usb_endpoint_is_int_in(endpoint)) return -ENODEV; pipe = usb_rcvintpipe(dev, endpoint->bEndpointAddress); diff --git a/drivers/usb/input/usbmouse.c b/drivers/usb/input/usbmouse.c index cbbbea332ed..68a55642c08 100644 --- a/drivers/usb/input/usbmouse.c +++ b/drivers/usb/input/usbmouse.c @@ -126,9 +126,7 @@ static int usb_mouse_probe(struct usb_interface *intf, const struct usb_device_i return -ENODEV; endpoint = &interface->endpoint[0].desc; - if (!(endpoint->bEndpointAddress & USB_DIR_IN)) - return -ENODEV; - if ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_INT) + if (!usb_endpoint_is_int_in(endpoint)) return -ENODEV; pipe = usb_rcvintpipe(dev, endpoint->bEndpointAddress); diff --git a/drivers/usb/input/usbtouchscreen.c b/drivers/usb/input/usbtouchscreen.c index 933ceddf3de..49704d4ed0e 100644 --- a/drivers/usb/input/usbtouchscreen.c +++ b/drivers/usb/input/usbtouchscreen.c @@ -8,6 +8,7 @@ * - PanJit TouchSet * - eTurboTouch * - Gunze AHL61 + * - DMC TSC-10/25 * * Copyright (C) 2004-2006 by Daniel Ritz <daniel.ritz@gmx.ch> * Copyright (C) by Todd E. Johnson (mtouchusb.c) @@ -30,6 +31,8 @@ * - ITM parts are from itmtouch.c * - 3M parts are from mtouchusb.c * - PanJit parts are from an unmerged driver by Lanslott Gish + * - DMC TSC 10/25 are from Holger Schurig, with ideas from an unmerged + * driver from Marius Vollmer * *****************************************************************************/ @@ -44,7 +47,7 @@ #include <linux/usb/input.h> -#define DRIVER_VERSION "v0.4" +#define DRIVER_VERSION "v0.5" #define DRIVER_AUTHOR "Daniel Ritz <daniel.ritz@gmx.ch>" #define DRIVER_DESC "USB Touchscreen Driver" @@ -103,6 +106,7 @@ enum { DEVTYPE_ITM, DEVTYPE_ETURBO, DEVTYPE_GUNZE, + DEVTYPE_DMC_TSC10, }; static struct usb_device_id usbtouch_devices[] = { @@ -139,6 +143,10 @@ static struct usb_device_id usbtouch_devices[] = { {USB_DEVICE(0x0637, 0x0001), .driver_info = DEVTYPE_GUNZE}, #endif +#ifdef CONFIG_USB_TOUCHSCREEN_DMC_TSC10 + {USB_DEVICE(0x0afa, 0x03e8), .driver_info = DEVTYPE_DMC_TSC10}, +#endif + {} }; @@ -313,6 +321,80 @@ static int gunze_read_data(unsigned char *pkt, int *x, int *y, int *touch, int * #endif /***************************************************************************** + * DMC TSC-10/25 Part + * + * Documentation about the controller and it's protocol can be found at + * http://www.dmccoltd.com/files/controler/tsc10usb_pi_e.pdf + * http://www.dmccoltd.com/files/controler/tsc25_usb_e.pdf + */ +#ifdef CONFIG_USB_TOUCHSCREEN_DMC_TSC10 + +/* supported data rates. currently using 130 */ +#define TSC10_RATE_POINT 0x50 +#define TSC10_RATE_30 0x40 +#define TSC10_RATE_50 0x41 +#define TSC10_RATE_80 0x42 +#define TSC10_RATE_100 0x43 +#define TSC10_RATE_130 0x44 +#define TSC10_RATE_150 0x45 + +/* commands */ +#define TSC10_CMD_RESET 0x55 +#define TSC10_CMD_RATE 0x05 +#define TSC10_CMD_DATA1 0x01 + +static int dmc_tsc10_init(struct usbtouch_usb *usbtouch) +{ + struct usb_device *dev = usbtouch->udev; + int ret; + unsigned char buf[2]; + + /* reset */ + buf[0] = buf[1] = 0xFF; + ret = usb_control_msg(dev, usb_rcvctrlpipe (dev, 0), + TSC10_CMD_RESET, + USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + 0, 0, buf, 2, USB_CTRL_SET_TIMEOUT); + if (ret < 0) + return ret; + if (buf[0] != 0x06 || buf[1] != 0x00) + return -ENODEV; + + /* set coordinate output rate */ + buf[0] = buf[1] = 0xFF; + ret = usb_control_msg(dev, usb_rcvctrlpipe (dev, 0), + TSC10_CMD_RATE, + USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + TSC10_RATE_150, 0, buf, 2, USB_CTRL_SET_TIMEOUT); + if (ret < 0) + return ret; + if (buf[0] != 0x06 || buf[1] != 0x00) + return -ENODEV; + + /* start sending data */ + ret = usb_control_msg(dev, usb_rcvctrlpipe (dev, 0), + TSC10_CMD_DATA1, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + 0, 0, NULL, 0, USB_CTRL_SET_TIMEOUT); + if (ret < 0) + return ret; + + return 0; +} + + +static int dmc_tsc10_read_data(unsigned char *pkt, int *x, int *y, int *touch, int *press) +{ + *x = ((pkt[2] & 0x03) << 8) | pkt[1]; + *y = ((pkt[4] & 0x03) << 8) | pkt[3]; + *touch = pkt[0] & 0x01; + + return 1; +} +#endif + + +/***************************************************************************** * the different device descriptors */ static struct usbtouch_device_info usbtouch_dev_info[] = { @@ -389,6 +471,18 @@ static struct usbtouch_device_info usbtouch_dev_info[] = { .read_data = gunze_read_data, }, #endif + +#ifdef CONFIG_USB_TOUCHSCREEN_DMC_TSC10 + [DEVTYPE_DMC_TSC10] = { + .min_xc = 0x0, + .max_xc = 0x03ff, + .min_yc = 0x0, + .max_yc = 0x03ff, + .rept_size = 5, + .init = dmc_tsc10_init, + .read_data = dmc_tsc10_read_data, + }, +#endif }; diff --git a/drivers/usb/input/wacom.h b/drivers/usb/input/wacom.h index 1cf08f02c50..d85abfc5ab5 100644 --- a/drivers/usb/input/wacom.h +++ b/drivers/usb/input/wacom.h @@ -110,7 +110,6 @@ struct wacom_combo { }; extern int wacom_wac_irq(struct wacom_wac * wacom_wac, void * wcombo); -extern void wacom_sys_irq(struct urb *urb); extern void wacom_report_abs(void *wcombo, unsigned int abs_type, int abs_data); extern void wacom_report_rel(void *wcombo, unsigned int rel_type, int rel_data); extern void wacom_report_key(void *wcombo, unsigned int key_type, int key_data); diff --git a/drivers/usb/input/wacom_sys.c b/drivers/usb/input/wacom_sys.c index 3498b893b53..e7cc20ab815 100644 --- a/drivers/usb/input/wacom_sys.c +++ b/drivers/usb/input/wacom_sys.c @@ -42,7 +42,7 @@ static struct input_dev * get_input_dev(struct wacom_combo *wcombo) return wcombo->wacom->dev; } -void wacom_sys_irq(struct urb *urb) +static void wacom_sys_irq(struct urb *urb) { struct wacom *wacom = urb->context; struct wacom_combo wcombo; diff --git a/drivers/usb/input/yealink.c b/drivers/usb/input/yealink.c index 905bf639825..2268ca311ad 100644 --- a/drivers/usb/input/yealink.c +++ b/drivers/usb/input/yealink.c @@ -859,10 +859,8 @@ static int usb_probe(struct usb_interface *intf, const struct usb_device_id *id) interface = intf->cur_altsetting; endpoint = &interface->endpoint[0].desc; - if (!(endpoint->bEndpointAddress & USB_DIR_IN)) - return -EIO; - if ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_INT) - return -EIO; + if (!usb_endpoint_is_int_in(endpoint)) + return -ENODEV; yld = kzalloc(sizeof(struct yealink_dev), GFP_KERNEL); if (!yld) diff --git a/drivers/usb/misc/Makefile b/drivers/usb/misc/Makefile index 11dc59540cd..2cba07d3197 100644 --- a/drivers/usb/misc/Makefile +++ b/drivers/usb/misc/Makefile @@ -4,6 +4,7 @@ # obj-$(CONFIG_USB_ADUTUX) += adutux.o +obj-$(CONFIG_USB_APPLEDISPLAY) += appledisplay.o obj-$(CONFIG_USB_AUERSWALD) += auerswald.o obj-$(CONFIG_USB_CYPRESS_CY7C63)+= cypress_cy7c63.o obj-$(CONFIG_USB_CYTHERM) += cytherm.o diff --git a/drivers/usb/misc/appledisplay.c b/drivers/usb/misc/appledisplay.c index 6b23a1def9f..ba30ca6a14a 100644 --- a/drivers/usb/misc/appledisplay.c +++ b/drivers/usb/misc/appledisplay.c @@ -216,10 +216,7 @@ static int appledisplay_probe(struct usb_interface *iface, iface_desc = iface->cur_altsetting; for (i = 0; i < iface_desc->desc.bNumEndpoints; i++) { endpoint = &iface_desc->endpoint[i].desc; - if (!int_in_endpointAddr && - (endpoint->bEndpointAddress & USB_DIR_IN) && - ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == - USB_ENDPOINT_XFER_INT)) { + if (!int_in_endpointAddr && usb_endpoint_is_int_in(endpoint)) { /* we found an interrupt in endpoint */ int_in_endpointAddr = endpoint->bEndpointAddress; break; diff --git a/drivers/usb/misc/auerswald.c b/drivers/usb/misc/auerswald.c index e4971d6aaaf..c703f73e165 100644 --- a/drivers/usb/misc/auerswald.c +++ b/drivers/usb/misc/auerswald.c @@ -704,9 +704,7 @@ static void auerbuf_free (pauerbuf_t bp) { kfree(bp->bufp); kfree(bp->dr); - if (bp->urbp) { - usb_free_urb(bp->urbp); - } + usb_free_urb(bp->urbp); kfree(bp); } @@ -1155,8 +1153,7 @@ static void auerswald_int_release (pauerswald_t cp) dbg ("auerswald_int_release"); /* stop the int endpoint */ - if (cp->inturbp) - usb_kill_urb (cp->inturbp); + usb_kill_urb (cp->inturbp); /* deallocate memory */ auerswald_int_free (cp); diff --git a/drivers/usb/misc/emi26.c b/drivers/usb/misc/emi26.c index 1fd9cb85f4c..5c0a26cbd12 100644 --- a/drivers/usb/misc/emi26.c +++ b/drivers/usb/misc/emi26.c @@ -53,13 +53,12 @@ static void __exit emi26_exit (void); static int emi26_writememory (struct usb_device *dev, int address, unsigned char *data, int length, __u8 request) { int result; - unsigned char *buffer = kmalloc (length, GFP_KERNEL); + unsigned char *buffer = kmemdup(data, length, GFP_KERNEL); if (!buffer) { err("emi26: kmalloc(%d) failed.", length); return -ENOMEM; } - memcpy (buffer, data, length); /* Note: usb_control_msg returns negative value on error or length of the * data that was written! */ result = usb_control_msg (dev, usb_sndctrlpipe(dev, 0), request, 0x40, address, 0, buffer, length, 300); diff --git a/drivers/usb/misc/emi62.c b/drivers/usb/misc/emi62.c index fe351371f27..23153eac0df 100644 --- a/drivers/usb/misc/emi62.c +++ b/drivers/usb/misc/emi62.c @@ -61,13 +61,12 @@ static void __exit emi62_exit (void); static int emi62_writememory (struct usb_device *dev, int address, unsigned char *data, int length, __u8 request) { int result; - unsigned char *buffer = kmalloc (length, GFP_KERNEL); + unsigned char *buffer = kmemdup(data, length, GFP_KERNEL); if (!buffer) { err("emi62: kmalloc(%d) failed.", length); return -ENOMEM; } - memcpy (buffer, data, length); /* Note: usb_control_msg returns negative value on error or length of the * data that was written! */ result = usb_control_msg (dev, usb_sndctrlpipe(dev, 0), request, 0x40, address, 0, buffer, length, 300); diff --git a/drivers/usb/misc/ftdi-elan.c b/drivers/usb/misc/ftdi-elan.c index e4e2cf2ba91..18b1925032a 100644 --- a/drivers/usb/misc/ftdi-elan.c +++ b/drivers/usb/misc/ftdi-elan.c @@ -272,7 +272,7 @@ void ftdi_elan_gone_away(struct platform_device *pdev) EXPORT_SYMBOL_GPL(ftdi_elan_gone_away); -void ftdi_release_platform_dev(struct device *dev) +static void ftdi_release_platform_dev(struct device *dev) { dev->parent = NULL; } @@ -1399,14 +1399,6 @@ static int ftdi_elan_read_reg(struct usb_ftdi *ftdi, u32 *data) } } -int usb_ftdi_elan_read_reg(struct platform_device *pdev, u32 *data) -{ - struct usb_ftdi *ftdi = platform_device_to_usb_ftdi(pdev); - return ftdi_elan_read_reg(ftdi, data); -} - - -EXPORT_SYMBOL_GPL(usb_ftdi_elan_read_reg); static int ftdi_elan_read_config(struct usb_ftdi *ftdi, int config_offset, u8 width, u32 *data) { @@ -2606,10 +2598,7 @@ static int ftdi_elan_probe(struct usb_interface *interface, for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { endpoint = &iface_desc->endpoint[i].desc; if (!ftdi->bulk_in_endpointAddr && - ((endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK) - == USB_DIR_IN) && ((endpoint->bmAttributes & - USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_BULK)) - { + usb_endpoint_is_bulk_in(endpoint)) { buffer_size = le16_to_cpu(endpoint->wMaxPacketSize); ftdi->bulk_in_size = buffer_size; ftdi->bulk_in_endpointAddr = endpoint->bEndpointAddress; @@ -2622,10 +2611,7 @@ static int ftdi_elan_probe(struct usb_interface *interface, } } if (!ftdi->bulk_out_endpointAddr && - ((endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK) - == USB_DIR_OUT) && ((endpoint->bmAttributes & - USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_BULK)) - { + usb_endpoint_is_bulk_out(endpoint)) { ftdi->bulk_out_endpointAddr = endpoint->bEndpointAddress; } diff --git a/drivers/usb/misc/idmouse.c b/drivers/usb/misc/idmouse.c index 8e6e195a22b..c9418535bef 100644 --- a/drivers/usb/misc/idmouse.c +++ b/drivers/usb/misc/idmouse.c @@ -125,12 +125,12 @@ static DEFINE_MUTEX(disconnect_mutex); static int idmouse_create_image(struct usb_idmouse *dev) { - int bytes_read = 0; - int bulk_read = 0; - int result = 0; + int bytes_read; + int bulk_read; + int result; memcpy(dev->bulk_in_buffer, HEADER, sizeof(HEADER)-1); - bytes_read += sizeof(HEADER)-1; + bytes_read = sizeof(HEADER)-1; /* reset the device and set a fast blink rate */ result = ftip_command(dev, FTIP_RELEASE, 0, 0); @@ -208,9 +208,9 @@ static inline void idmouse_delete(struct usb_idmouse *dev) static int idmouse_open(struct inode *inode, struct file *file) { - struct usb_idmouse *dev = NULL; + struct usb_idmouse *dev; struct usb_interface *interface; - int result = 0; + int result; /* prevent disconnects */ mutex_lock(&disconnect_mutex); @@ -305,7 +305,7 @@ static ssize_t idmouse_read(struct file *file, char __user *buffer, size_t count loff_t * ppos) { struct usb_idmouse *dev; - int result = 0; + int result; dev = (struct usb_idmouse *) file->private_data; @@ -329,7 +329,7 @@ static int idmouse_probe(struct usb_interface *interface, const struct usb_device_id *id) { struct usb_device *udev = interface_to_usbdev(interface); - struct usb_idmouse *dev = NULL; + struct usb_idmouse *dev; struct usb_host_interface *iface_desc; struct usb_endpoint_descriptor *endpoint; int result; @@ -350,11 +350,7 @@ static int idmouse_probe(struct usb_interface *interface, /* set up the endpoint information - use only the first bulk-in endpoint */ endpoint = &iface_desc->endpoint[0].desc; - if (!dev->bulk_in_endpointAddr - && (endpoint->bEndpointAddress & USB_DIR_IN) - && ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == - USB_ENDPOINT_XFER_BULK)) { - + if (!dev->bulk_in_endpointAddr && usb_endpoint_is_bulk_in(endpoint)) { /* we found a bulk in endpoint */ dev->orig_bi_size = le16_to_cpu(endpoint->wMaxPacketSize); dev->bulk_in_size = 0x200; /* works _much_ faster */ diff --git a/drivers/usb/misc/legousbtower.c b/drivers/usb/misc/legousbtower.c index 27089497e71..5dce797bddb 100644 --- a/drivers/usb/misc/legousbtower.c +++ b/drivers/usb/misc/legousbtower.c @@ -317,12 +317,8 @@ static inline void tower_delete (struct lego_usb_tower *dev) tower_abort_transfers (dev); /* free data structures */ - if (dev->interrupt_in_urb != NULL) { - usb_free_urb (dev->interrupt_in_urb); - } - if (dev->interrupt_out_urb != NULL) { - usb_free_urb (dev->interrupt_out_urb); - } + usb_free_urb(dev->interrupt_in_urb); + usb_free_urb(dev->interrupt_out_urb); kfree (dev->read_buffer); kfree (dev->interrupt_in_buffer); kfree (dev->interrupt_out_buffer); @@ -502,15 +498,11 @@ static void tower_abort_transfers (struct lego_usb_tower *dev) if (dev->interrupt_in_running) { dev->interrupt_in_running = 0; mb(); - if (dev->interrupt_in_urb != NULL && dev->udev) { + if (dev->udev) usb_kill_urb (dev->interrupt_in_urb); - } - } - if (dev->interrupt_out_busy) { - if (dev->interrupt_out_urb != NULL && dev->udev) { - usb_kill_urb (dev->interrupt_out_urb); - } } + if (dev->interrupt_out_busy && dev->udev) + usb_kill_urb(dev->interrupt_out_urb); exit: dbg(2, "%s: leave", __FUNCTION__); @@ -898,14 +890,11 @@ static int tower_probe (struct usb_interface *interface, const struct usb_device for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { endpoint = &iface_desc->endpoint[i].desc; - if (((endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) && - ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT)) { - dev->interrupt_in_endpoint = endpoint; - } - - if (((endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT) && - ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT)) { - dev->interrupt_out_endpoint = endpoint; + if (usb_endpoint_xfer_int(endpoint)) { + if (usb_endpoint_dir_in(endpoint)) + dev->interrupt_in_endpoint = endpoint; + else + dev->interrupt_out_endpoint = endpoint; } } if(dev->interrupt_in_endpoint == NULL) { diff --git a/drivers/usb/misc/phidgetkit.c b/drivers/usb/misc/phidgetkit.c index 33e716c6a79..9659c79e187 100644 --- a/drivers/usb/misc/phidgetkit.c +++ b/drivers/usb/misc/phidgetkit.c @@ -554,7 +554,7 @@ static int interfacekit_probe(struct usb_interface *intf, const struct usb_devic return -ENODEV; endpoint = &interface->endpoint[0].desc; - if (!(endpoint->bEndpointAddress & 0x80)) + if (!usb_endpoint_dir_in(endpoint)) return -ENODEV; /* * bmAttributes @@ -653,8 +653,7 @@ out2: device_remove_file(kit->dev, &dev_output_attrs[i]); out: if (kit) { - if (kit->irq) - usb_free_urb(kit->irq); + usb_free_urb(kit->irq); if (kit->data) usb_buffer_free(dev, URB_INT_SIZE, kit->data, kit->data_dma); if (kit->dev) diff --git a/drivers/usb/misc/phidgetmotorcontrol.c b/drivers/usb/misc/phidgetmotorcontrol.c index 0385ffcc741..2bb4fa572bb 100644 --- a/drivers/usb/misc/phidgetmotorcontrol.c +++ b/drivers/usb/misc/phidgetmotorcontrol.c @@ -324,7 +324,7 @@ static int motorcontrol_probe(struct usb_interface *intf, const struct usb_devic return -ENODEV; endpoint = &interface->endpoint[0].desc; - if (!(endpoint->bEndpointAddress & 0x80)) + if (!usb_endpoint_dir_in(endpoint)) return -ENODEV; /* @@ -393,8 +393,7 @@ out2: device_remove_file(mc->dev, &dev_attrs[i]); out: if (mc) { - if (mc->irq) - usb_free_urb(mc->irq); + usb_free_urb(mc->irq); if (mc->data) usb_buffer_free(dev, URB_INT_SIZE, mc->data, mc->data_dma); if (mc->dev) diff --git a/drivers/usb/misc/usb_u132.h b/drivers/usb/misc/usb_u132.h index 551ba8906d6..dc2e5a31cae 100644 --- a/drivers/usb/misc/usb_u132.h +++ b/drivers/usb/misc/usb_u132.h @@ -52,7 +52,7 @@ * the kernel to load the "u132-hcd" module. * * The "ftdi-u132" module provides the interface to the inserted -* PC card and the "u132-hcd" module uses the API to send and recieve +* PC card and the "u132-hcd" module uses the API to send and receive * data. The API features call-backs, so that part of the "u132-hcd" * module code will run in the context of one of the kernel threads * of the "ftdi-u132" module. @@ -95,3 +95,7 @@ int usb_ftdi_elan_edset_setup(struct platform_device *pdev, u8 ed_number, int halted, int skipped, int actual, int non_null)); int usb_ftdi_elan_edset_flush(struct platform_device *pdev, u8 ed_number, void *endp); +int usb_ftdi_elan_read_pcimem(struct platform_device *pdev, int mem_offset, + u8 width, u32 *data); +int usb_ftdi_elan_write_pcimem(struct platform_device *pdev, int mem_offset, + u8 width, u32 data); diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c index 7c2cbdf81d2..194065dbb51 100644 --- a/drivers/usb/misc/usbtest.c +++ b/drivers/usb/misc/usbtest.c @@ -138,7 +138,7 @@ get_endpoints (struct usbtest_dev *dev, struct usb_interface *intf) default: continue; } - if (e->desc.bEndpointAddress & USB_DIR_IN) { + if (usb_endpoint_dir_in(&e->desc)) { if (!in) in = e; } else { @@ -147,7 +147,7 @@ get_endpoints (struct usbtest_dev *dev, struct usb_interface *intf) } continue; try_iso: - if (e->desc.bEndpointAddress & USB_DIR_IN) { + if (usb_endpoint_dir_in(&e->desc)) { if (!iso_in) iso_in = e; } else { diff --git a/drivers/usb/net/asix.c b/drivers/usb/net/asix.c index 881841e600d..95e682e2c9d 100644 --- a/drivers/usb/net/asix.c +++ b/drivers/usb/net/asix.c @@ -249,9 +249,9 @@ asix_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value, u16 index, req->bRequestType = USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE; req->bRequest = cmd; - req->wValue = value; - req->wIndex = index; - req->wLength = size; + req->wValue = cpu_to_le16(value); + req->wIndex = cpu_to_le16(index); + req->wLength = cpu_to_le16(size); usb_fill_control_urb(urb, dev->udev, usb_sndctrlpipe(dev->udev, 0), diff --git a/drivers/usb/net/catc.c b/drivers/usb/net/catc.c index f740325abac..907b820a5fa 100644 --- a/drivers/usb/net/catc.c +++ b/drivers/usb/net/catc.c @@ -786,14 +786,10 @@ static int catc_probe(struct usb_interface *intf, const struct usb_device_id *id if ((!catc->ctrl_urb) || (!catc->tx_urb) || (!catc->rx_urb) || (!catc->irq_urb)) { err("No free urbs available."); - if (catc->ctrl_urb) - usb_free_urb(catc->ctrl_urb); - if (catc->tx_urb) - usb_free_urb(catc->tx_urb); - if (catc->rx_urb) - usb_free_urb(catc->rx_urb); - if (catc->irq_urb) - usb_free_urb(catc->irq_urb); + usb_free_urb(catc->ctrl_urb); + usb_free_urb(catc->tx_urb); + usb_free_urb(catc->rx_urb); + usb_free_urb(catc->irq_urb); free_netdev(netdev); return -ENOMEM; } diff --git a/drivers/usb/net/cdc_ether.c b/drivers/usb/net/cdc_ether.c index f6971b88349..44a91547146 100644 --- a/drivers/usb/net/cdc_ether.c +++ b/drivers/usb/net/cdc_ether.c @@ -200,8 +200,7 @@ next_desc: dev->status = &info->control->cur_altsetting->endpoint [0]; desc = &dev->status->desc; - if (desc->bmAttributes != USB_ENDPOINT_XFER_INT - || !(desc->bEndpointAddress & USB_DIR_IN) + if (!usb_endpoint_is_int_in(desc) || (le16_to_cpu(desc->wMaxPacketSize) < sizeof(struct usb_cdc_notification)) || !desc->bInterval) { diff --git a/drivers/usb/net/net1080.c b/drivers/usb/net/net1080.c index ce00de8f13a..a77410562e1 100644 --- a/drivers/usb/net/net1080.c +++ b/drivers/usb/net/net1080.c @@ -237,12 +237,12 @@ static inline void nc_dump_usbctl(struct usbnet *dev, u16 usbctl) #define STATUS_CONN_OTHER (1 << 14) #define STATUS_SUSPEND_OTHER (1 << 13) #define STATUS_MAILBOX_OTHER (1 << 12) -#define STATUS_PACKETS_OTHER(n) (((n) >> 8) && 0x03) +#define STATUS_PACKETS_OTHER(n) (((n) >> 8) & 0x03) #define STATUS_CONN_THIS (1 << 6) #define STATUS_SUSPEND_THIS (1 << 5) #define STATUS_MAILBOX_THIS (1 << 4) -#define STATUS_PACKETS_THIS(n) (((n) >> 0) && 0x03) +#define STATUS_PACKETS_THIS(n) (((n) >> 0) & 0x03) #define STATUS_UNSPEC_MASK 0x0c8c #define STATUS_NOISE_MASK ((u16)~(0x0303|STATUS_UNSPEC_MASK)) diff --git a/drivers/usb/net/pegasus.c b/drivers/usb/net/pegasus.c index 78cf6f09128..b5690b3834e 100644 --- a/drivers/usb/net/pegasus.c +++ b/drivers/usb/net/pegasus.c @@ -163,6 +163,7 @@ static int get_registers(pegasus_t * pegasus, __u16 indx, __u16 size, /* using ATOMIC, we'd never wake up if we slept */ if ((ret = usb_submit_urb(pegasus->ctrl_urb, GFP_ATOMIC))) { + set_current_state(TASK_RUNNING); if (ret == -ENODEV) netif_device_detach(pegasus->net); if (netif_msg_drv(pegasus)) diff --git a/drivers/usb/net/usbnet.c b/drivers/usb/net/usbnet.c index 79b5474fe23..327f9755567 100644 --- a/drivers/usb/net/usbnet.c +++ b/drivers/usb/net/usbnet.c @@ -116,7 +116,7 @@ int usbnet_get_endpoints(struct usbnet *dev, struct usb_interface *intf) e = alt->endpoint + ep; switch (e->desc.bmAttributes) { case USB_ENDPOINT_XFER_INT: - if (!(e->desc.bEndpointAddress & USB_DIR_IN)) + if (!usb_endpoint_dir_in(&e->desc)) continue; intr = 1; /* FALLTHROUGH */ @@ -125,7 +125,7 @@ int usbnet_get_endpoints(struct usbnet *dev, struct usb_interface *intf) default: continue; } - if (e->desc.bEndpointAddress & USB_DIR_IN) { + if (usb_endpoint_dir_in(&e->desc)) { if (!intr && !in) in = e; else if (intr && !status) diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig index 2a8dd4cc943..2f4d303ee36 100644 --- a/drivers/usb/serial/Kconfig +++ b/drivers/usb/serial/Kconfig @@ -554,6 +554,17 @@ config USB_SERIAL_OMNINET To compile this driver as a module, choose M here: the module will be called omninet. +config USB_SERIAL_DEBUG + tristate "USB Debugging Device" + depends on USB_SERIAL + help + Say Y here if you have a USB debugging device used to recieve + debugging data from another machine. The most common of these + devices is the NetChip TurboCONNECT device. + + To compile this driver as a module, choose M here: the + module will be called usb-debug. + config USB_EZUSB bool depends on USB_SERIAL_KEYSPAN_PDA || USB_SERIAL_XIRCOM || USB_SERIAL_KEYSPAN || USB_SERIAL_WHITEHEAT diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile index a5047dc599b..61166ad450e 100644 --- a/drivers/usb/serial/Makefile +++ b/drivers/usb/serial/Makefile @@ -18,6 +18,7 @@ obj-$(CONFIG_USB_SERIAL_BELKIN) += belkin_sa.o obj-$(CONFIG_USB_SERIAL_CP2101) += cp2101.o obj-$(CONFIG_USB_SERIAL_CYBERJACK) += cyberjack.o obj-$(CONFIG_USB_SERIAL_CYPRESS_M8) += cypress_m8.o +obj-$(CONFIG_USB_SERIAL_DEBUG) += usb_debug.o obj-$(CONFIG_USB_SERIAL_DIGI_ACCELEPORT) += digi_acceleport.o obj-$(CONFIG_USB_SERIAL_EDGEPORT) += io_edgeport.o obj-$(CONFIG_USB_SERIAL_EDGEPORT_TI) += io_ti.o diff --git a/drivers/usb/serial/aircable.c b/drivers/usb/serial/aircable.c index 2a4ac9bd6a3..86bcf63b6ba 100644 --- a/drivers/usb/serial/aircable.c +++ b/drivers/usb/serial/aircable.c @@ -272,8 +272,11 @@ static void aircable_read(struct work_struct *work) */ tty = port->tty; - if (!tty) + if (!tty) { schedule_work(&priv->rx_work); + err("%s - No tty available", __FUNCTION__); + return ; + } count = min(64, serial_buf_data_avail(priv->rx_buf)); @@ -307,9 +310,7 @@ static int aircable_probe(struct usb_serial *serial, for (i = 0; i < iface_desc->desc.bNumEndpoints; i++) { endpoint = &iface_desc->endpoint[i].desc; - if (((endpoint->bEndpointAddress & 0x80) == 0x00) && - ((endpoint->bmAttributes & 3) == 0x02)) { - /* we found our bulk out endpoint */ + if (usb_endpoint_is_bulk_out(endpoint)) { dbg("found bulk out on endpoint %d", i); ++num_bulk_out; } diff --git a/drivers/usb/serial/airprime.c b/drivers/usb/serial/airprime.c index 7f5d546da39..96c73726d74 100644 --- a/drivers/usb/serial/airprime.c +++ b/drivers/usb/serial/airprime.c @@ -19,6 +19,7 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x0c88, 0x17da) }, /* Kyocera Wireless KPC650/Passport */ { USB_DEVICE(0x1410, 0x1110) }, /* Novatel Wireless Merlin CDMA */ + { USB_DEVICE(0x1410, 0x1430) }, /* Novatel Merlin XU870 HSDPA/3G */ { USB_DEVICE(0x1410, 0x1100) }, /* ExpressCard34 Qualcomm 3G CDMA */ { }, }; diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c index ca52f12f0e2..863966c1c5a 100644 --- a/drivers/usb/serial/ark3116.c +++ b/drivers/usb/serial/ark3116.c @@ -85,10 +85,9 @@ static int ark3116_attach(struct usb_serial *serial) int i; for (i = 0; i < serial->num_ports; ++i) { - priv = kmalloc(sizeof (struct ark3116_private), GFP_KERNEL); + priv = kzalloc(sizeof(struct ark3116_private), GFP_KERNEL); if (!priv) goto cleanup; - memset(priv, 0x00, sizeof (struct ark3116_private)); spin_lock_init(&priv->lock); usb_set_serial_port_data(serial->port[i], priv); diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c index 3a9073dbfe6..7167728d764 100644 --- a/drivers/usb/serial/console.c +++ b/drivers/usb/serial/console.c @@ -166,19 +166,17 @@ static int usb_console_setup(struct console *co, char *options) if (serial->type->set_termios) { /* build up a fake tty structure so that the open call has something * to look at to get the cflag value */ - tty = kmalloc (sizeof (*tty), GFP_KERNEL); + tty = kzalloc(sizeof(*tty), GFP_KERNEL); if (!tty) { err ("no more memory"); return -ENOMEM; } - termios = kmalloc (sizeof (*termios), GFP_KERNEL); + termios = kzalloc(sizeof(*termios), GFP_KERNEL); if (!termios) { err ("no more memory"); kfree (tty); return -ENOMEM; } - memset (tty, 0x00, sizeof(*tty)); - memset (termios, 0x00, sizeof(*termios)); termios->c_cflag = cflag; tty->termios = termios; port->tty = tty; diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index f2e89a08365..093f303b318 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -1684,15 +1684,14 @@ static int __init cypress_init(void) info(DRIVER_DESC " " DRIVER_VERSION); return 0; + failed_usb_register: - usb_deregister(&cypress_driver); -failed_ca42v2_register: usb_serial_deregister(&cypress_ca42v2_device); -failed_hidcom_register: +failed_ca42v2_register: usb_serial_deregister(&cypress_hidcom_device); -failed_em_register: +failed_hidcom_register: usb_serial_deregister(&cypress_earthmate_device); - +failed_em_register: return retval; } diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c index fd159b040bf..83d0e21145b 100644 --- a/drivers/usb/serial/digi_acceleport.c +++ b/drivers/usb/serial/digi_acceleport.c @@ -157,7 +157,7 @@ * to TASK_RUNNING will be lost and write_chan's subsequent call to * schedule() will never return (unless it catches a signal). * This race condition occurs because write_bulk_callback() (and thus -* the wakeup) are called asynchonously from an interrupt, rather than +* the wakeup) are called asynchronously from an interrupt, rather than * from the scheduler. We can avoid the race by calling the wakeup * from the scheduler queue and that's our fix: Now, at the end of * write_bulk_callback() we queue up a wakeup call on the scheduler diff --git a/drivers/usb/serial/ezusb.c b/drivers/usb/serial/ezusb.c index 5169c2d154a..97ee718b1da 100644 --- a/drivers/usb/serial/ezusb.c +++ b/drivers/usb/serial/ezusb.c @@ -31,12 +31,11 @@ int ezusb_writememory (struct usb_serial *serial, int address, unsigned char *da return -ENODEV; } - transfer_buffer = kmalloc (length, GFP_KERNEL); + transfer_buffer = kmemdup(data, length, GFP_KERNEL); if (!transfer_buffer) { dev_err(&serial->dev->dev, "%s - kmalloc(%d) failed.\n", __FUNCTION__, length); return -ENOMEM; } - memcpy (transfer_buffer, data, length); result = usb_control_msg (serial->dev, usb_sndctrlpipe(serial->dev, 0), bRequest, 0x40, address, 0, transfer_buffer, length, 3000); kfree (transfer_buffer); return result; diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 88ed5c1d236..72e4d48f51e 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -1390,8 +1390,7 @@ static void ftdi_close (struct usb_serial_port *port, struct file *filp) flush_scheduled_work(); /* shutdown our bulk read */ - if (port->read_urb) - usb_kill_urb(port->read_urb); + usb_kill_urb(port->read_urb); } /* ftdi_close */ diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c index 4543152a996..6530d391ebe 100644 --- a/drivers/usb/serial/garmin_gps.c +++ b/drivers/usb/serial/garmin_gps.c @@ -1523,12 +1523,11 @@ static int garmin_attach (struct usb_serial *serial) dbg("%s", __FUNCTION__); - garmin_data_p = kmalloc (sizeof(struct garmin_data), GFP_KERNEL); + garmin_data_p = kzalloc(sizeof(struct garmin_data), GFP_KERNEL); if (garmin_data_p == NULL) { dev_err(&port->dev, "%s - Out of memory\n", __FUNCTION__); return -ENOMEM; } - memset (garmin_data_p, 0, sizeof(struct garmin_data)); init_timer(&garmin_data_p->timer); spin_lock_init(&garmin_data_p->lock); INIT_LIST_HEAD(&garmin_data_p->pktlist); diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index 91bd3014ef1..d06547a13f2 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -1038,9 +1038,7 @@ static void edge_close (struct usb_serial_port *port, struct file * filp) edge_port->open = FALSE; edge_port->openPending = FALSE; - if (edge_port->write_urb) { - usb_kill_urb(edge_port->write_urb); - } + usb_kill_urb(edge_port->write_urb); if (edge_port->write_urb) { /* if this urb had a transfer buffer already (old transfer) free it */ diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c index 2a4bb66691a..d3b9a351cef 100644 --- a/drivers/usb/serial/ipw.c +++ b/drivers/usb/serial/ipw.c @@ -206,10 +206,9 @@ static int ipw_open(struct usb_serial_port *port, struct file *filp) dbg("%s", __FUNCTION__); - buf_flow_init = kmalloc(16, GFP_KERNEL); + buf_flow_init = kmemdup(buf_flow_static, 16, GFP_KERNEL); if (!buf_flow_init) return -ENOMEM; - memcpy(buf_flow_init, buf_flow_static, 16); if (port->tty) port->tty->low_latency = 1; diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c index 53be824eb1b..7639652cec4 100644 --- a/drivers/usb/serial/keyspan.c +++ b/drivers/usb/serial/keyspan.c @@ -2306,22 +2306,16 @@ static void keyspan_shutdown (struct usb_serial *serial) } /* Now free them */ - if (s_priv->instat_urb) - usb_free_urb(s_priv->instat_urb); - if (s_priv->glocont_urb) - usb_free_urb(s_priv->glocont_urb); + usb_free_urb(s_priv->instat_urb); + usb_free_urb(s_priv->glocont_urb); for (i = 0; i < serial->num_ports; ++i) { port = serial->port[i]; p_priv = usb_get_serial_port_data(port); - if (p_priv->inack_urb) - usb_free_urb(p_priv->inack_urb); - if (p_priv->outcont_urb) - usb_free_urb(p_priv->outcont_urb); + usb_free_urb(p_priv->inack_urb); + usb_free_urb(p_priv->outcont_urb); for (j = 0; j < 2; j++) { - if (p_priv->in_urbs[j]) - usb_free_urb(p_priv->in_urbs[j]); - if (p_priv->out_urbs[j]) - usb_free_urb(p_priv->out_urbs[j]); + usb_free_urb(p_priv->in_urbs[j]); + usb_free_urb(p_priv->out_urbs[j]); } } diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c index ff03331e0bc..237289920f0 100644 --- a/drivers/usb/serial/kobil_sct.c +++ b/drivers/usb/serial/kobil_sct.c @@ -185,13 +185,11 @@ static int kobil_startup (struct usb_serial *serial) for (i = 0; i < altsetting->desc.bNumEndpoints; i++) { endpoint = &altsetting->endpoint[i]; - if (((endpoint->desc.bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT) && - ((endpoint->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT)) { + if (usb_endpoint_is_int_out(&endpoint->desc)) { dbg("%s Found interrupt out endpoint. Address: %d", __FUNCTION__, endpoint->desc.bEndpointAddress); priv->write_int_endpoint_address = endpoint->desc.bEndpointAddress; } - if (((endpoint->desc.bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) && - ((endpoint->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT)) { + if (usb_endpoint_is_int_in(&endpoint->desc)) { dbg("%s Found interrupt in endpoint. Address: %d", __FUNCTION__, endpoint->desc.bEndpointAddress); priv->read_int_endpoint_address = endpoint->desc.bEndpointAddress; } @@ -355,8 +353,7 @@ static void kobil_close (struct usb_serial_port *port, struct file *filp) usb_free_urb( port->write_urb ); port->write_urb = NULL; } - if (port->interrupt_in_urb) - usb_kill_urb(port->interrupt_in_urb); + usb_kill_urb(port->interrupt_in_urb); } diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c index b7582cc496d..a906e500a02 100644 --- a/drivers/usb/serial/mct_u232.c +++ b/drivers/usb/serial/mct_u232.c @@ -358,10 +358,8 @@ static int mct_u232_startup (struct usb_serial *serial) /* Puh, that's dirty */ port = serial->port[0]; rport = serial->port[1]; - if (port->read_urb) { - /* No unlinking, it wasn't submitted yet. */ - usb_free_urb(port->read_urb); - } + /* No unlinking, it wasn't submitted yet. */ + usb_free_urb(port->read_urb); port->read_urb = rport->interrupt_in_urb; rport->interrupt_in_urb = NULL; port->read_urb->context = port; diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index 5b71962d035..02c89e10b2c 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -2596,12 +2596,11 @@ static int mos7840_startup(struct usb_serial *serial) /* set up port private structures */ for (i = 0; i < serial->num_ports; ++i) { - mos7840_port = kmalloc(sizeof(struct moschip_port), GFP_KERNEL); + mos7840_port = kzalloc(sizeof(struct moschip_port), GFP_KERNEL); if (mos7840_port == NULL) { err("%s - Out of memory", __FUNCTION__); return -ENOMEM; } - memset(mos7840_port, 0, sizeof(struct moschip_port)); /* Initialize all port interrupt end point to port 0 int endpoint * * Our device has only one interrupt end point comman to all port */ diff --git a/drivers/usb/serial/navman.c b/drivers/usb/serial/navman.c index 0610409a656..054abee8165 100644 --- a/drivers/usb/serial/navman.c +++ b/drivers/usb/serial/navman.c @@ -95,8 +95,7 @@ static void navman_close(struct usb_serial_port *port, struct file *filp) { dbg("%s - port %d", __FUNCTION__, port->number); - if (port->interrupt_in_urb) - usb_kill_urb(port->interrupt_in_urb); + usb_kill_urb(port->interrupt_in_urb); } static int navman_write(struct usb_serial_port *port, diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index 07400c0c8a8..ae98d8cbdbb 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -228,6 +228,7 @@ static int product_5052_count; /* null entry */ static struct usb_device_id ti_id_table_3410[1+TI_EXTRA_VID_PID_COUNT+1] = { { USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) }, + { USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) }, }; static struct usb_device_id ti_id_table_5052[4+TI_EXTRA_VID_PID_COUNT+1] = { @@ -239,6 +240,7 @@ static struct usb_device_id ti_id_table_5052[4+TI_EXTRA_VID_PID_COUNT+1] = { static struct usb_device_id ti_id_table_combined[] = { { USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) }, + { USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) }, { USB_DEVICE(TI_VENDOR_ID, TI_5052_BOOT_PRODUCT_ID) }, { USB_DEVICE(TI_VENDOR_ID, TI_5152_BOOT_PRODUCT_ID) }, { USB_DEVICE(TI_VENDOR_ID, TI_5052_EEPROM_PRODUCT_ID) }, @@ -459,13 +461,12 @@ static int ti_startup(struct usb_serial *serial) /* set up port structures */ for (i = 0; i < serial->num_ports; ++i) { - tport = kmalloc(sizeof(struct ti_port), GFP_KERNEL); + tport = kzalloc(sizeof(struct ti_port), GFP_KERNEL); if (tport == NULL) { dev_err(&dev->dev, "%s - out of memory\n", __FUNCTION__); status = -ENOMEM; goto free_tports; } - memset(tport, 0, sizeof(struct ti_port)); spin_lock_init(&tport->tp_lock); tport->tp_uart_base_addr = (i == 0 ? TI_UART1_BASE_ADDR : TI_UART2_BASE_ADDR); tport->tp_flags = low_latency ? ASYNC_LOW_LATENCY : 0; diff --git a/drivers/usb/serial/ti_usb_3410_5052.h b/drivers/usb/serial/ti_usb_3410_5052.h index 02c1aeb9e1b..b5541bf991b 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.h +++ b/drivers/usb/serial/ti_usb_3410_5052.h @@ -28,6 +28,7 @@ /* Vendor and product ids */ #define TI_VENDOR_ID 0x0451 #define TI_3410_PRODUCT_ID 0x3410 +#define TI_3410_EZ430_ID 0xF430 /* TI ez430 development tool */ #define TI_5052_BOOT_PRODUCT_ID 0x5052 /* no EEPROM, no firmware */ #define TI_5152_BOOT_PRODUCT_ID 0x5152 /* no EEPROM, no firmware */ #define TI_5052_EEPROM_PRODUCT_ID 0x505A /* EEPROM, no firmware */ diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 2cfba8488a9..3d5072f14b8 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -953,32 +953,28 @@ probe_error: port = serial->port[i]; if (!port) continue; - if (port->read_urb) - usb_free_urb (port->read_urb); + usb_free_urb(port->read_urb); kfree(port->bulk_in_buffer); } for (i = 0; i < num_bulk_out; ++i) { port = serial->port[i]; if (!port) continue; - if (port->write_urb) - usb_free_urb (port->write_urb); + usb_free_urb(port->write_urb); kfree(port->bulk_out_buffer); } for (i = 0; i < num_interrupt_in; ++i) { port = serial->port[i]; if (!port) continue; - if (port->interrupt_in_urb) - usb_free_urb (port->interrupt_in_urb); + usb_free_urb(port->interrupt_in_urb); kfree(port->interrupt_in_buffer); } for (i = 0; i < num_interrupt_out; ++i) { port = serial->port[i]; if (!port) continue; - if (port->interrupt_out_urb) - usb_free_urb (port->interrupt_out_urb); + usb_free_urb(port->interrupt_out_urb); kfree(port->interrupt_out_buffer); } diff --git a/drivers/usb/serial/usb_debug.c b/drivers/usb/serial/usb_debug.c new file mode 100644 index 00000000000..257a5e43687 --- /dev/null +++ b/drivers/usb/serial/usb_debug.c @@ -0,0 +1,65 @@ +/* + * USB Debug cable driver + * + * Copyright (C) 2006 Greg Kroah-Hartman <greg@kroah.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/tty.h> +#include <linux/module.h> +#include <linux/usb.h> +#include <linux/usb/serial.h> + +static struct usb_device_id id_table [] = { + { USB_DEVICE(0x0525, 0x127a) }, + { }, +}; +MODULE_DEVICE_TABLE(usb, id_table); + +static struct usb_driver debug_driver = { + .name = "debug", + .probe = usb_serial_probe, + .disconnect = usb_serial_disconnect, + .id_table = id_table, + .no_dynamic_id = 1, +}; + +static struct usb_serial_driver debug_device = { + .driver = { + .owner = THIS_MODULE, + .name = "debug", + }, + .id_table = id_table, + .num_interrupt_in = NUM_DONT_CARE, + .num_bulk_in = NUM_DONT_CARE, + .num_bulk_out = NUM_DONT_CARE, + .num_ports = 1, +}; + +static int __init debug_init(void) +{ + int retval; + + retval = usb_serial_register(&debug_device); + if (retval) + return retval; + retval = usb_register(&debug_driver); + if (retval) + usb_serial_deregister(&debug_device); + return retval; +} + +static void __exit debug_exit(void) +{ + usb_deregister(&debug_driver); + usb_serial_deregister(&debug_device); +} + +module_init(debug_init); +module_exit(debug_exit); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c index befe2e11a04..eef5eaa5fa0 100644 --- a/drivers/usb/serial/visor.c +++ b/drivers/usb/serial/visor.c @@ -348,8 +348,7 @@ static void visor_close (struct usb_serial_port *port, struct file * filp) /* shutdown our urbs */ usb_kill_urb(port->read_urb); - if (port->interrupt_in_urb) - usb_kill_urb(port->interrupt_in_urb); + usb_kill_urb(port->interrupt_in_urb); /* Try to send shutdown message, if the device is gone, this will just fail. */ transfer_buffer = kmalloc (0x12, GFP_KERNEL); diff --git a/drivers/usb/storage/onetouch.c b/drivers/usb/storage/onetouch.c index 3baf448e300..3a158d58441 100644 --- a/drivers/usb/storage/onetouch.c +++ b/drivers/usb/storage/onetouch.c @@ -142,10 +142,7 @@ int onetouch_connect_input(struct us_data *ss) return -ENODEV; endpoint = &interface->endpoint[2].desc; - if (!(endpoint->bEndpointAddress & USB_DIR_IN)) - return -ENODEV; - if ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) - != USB_ENDPOINT_XFER_INT) + if (!usb_endpoint_is_int_in(endpoint)) return -ENODEV; pipe = usb_rcvintpipe(udev, endpoint->bEndpointAddress); diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index efb047f431e..db8b26012c7 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -1318,6 +1318,16 @@ UNUSUAL_DEV( 0x1019, 0x0c55, 0x0000, 0x0110, US_SC_DEVICE, US_PR_DEVICE, usb_stor_ucr61s2b_init, 0 ), +/* Reported by Jaco Kroon <jaco@kroon.co.za> + * The usb-storage module found on the Digitech GNX4 (and supposedly other + * devices) misbehaves and causes a bunch of invalid I/O errors. + */ +UNUSUAL_DEV( 0x1210, 0x0003, 0x0100, 0x0100, + "Digitech HMG", + "DigiTech Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE ), + /* Reported by Vilius Bilinkevicius <vilisas AT xxx DOT lt) */ UNUSUAL_DEV( 0x132b, 0x000b, 0x0001, 0x0001, "Minolta", diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index b8d6031b097..b401084b3d2 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -740,18 +740,16 @@ static int get_pipes(struct us_data *us) ep = &altsetting->endpoint[i].desc; /* Is it a BULK endpoint? */ - if ((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) - == USB_ENDPOINT_XFER_BULK) { + if (usb_endpoint_xfer_bulk(ep)) { /* BULK in or out? */ - if (ep->bEndpointAddress & USB_DIR_IN) + if (usb_endpoint_dir_in(ep)) ep_in = ep; else ep_out = ep; } /* Is it an interrupt endpoint? */ - else if ((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) - == USB_ENDPOINT_XFER_INT) { + else if (usb_endpoint_xfer_int(ep)) { ep_int = ep; } } diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c index 93ffcdd95f5..e973a87fbb0 100644 --- a/drivers/video/fbmem.c +++ b/drivers/video/fbmem.c @@ -1296,14 +1296,14 @@ register_framebuffer(struct fb_info *fb_info) break; fb_info->node = i; - fb_info->class_device = class_device_create(fb_class, NULL, MKDEV(FB_MAJOR, i), - fb_info->device, "fb%d", i); - if (IS_ERR(fb_info->class_device)) { + fb_info->dev = device_create(fb_class, fb_info->device, + MKDEV(FB_MAJOR, i), "fb%d", i); + if (IS_ERR(fb_info->dev)) { /* Not fatal */ - printk(KERN_WARNING "Unable to create class_device for framebuffer %d; errno = %ld\n", i, PTR_ERR(fb_info->class_device)); - fb_info->class_device = NULL; + printk(KERN_WARNING "Unable to create device for framebuffer %d; errno = %ld\n", i, PTR_ERR(fb_info->dev)); + fb_info->dev = NULL; } else - fb_init_class_device(fb_info); + fb_init_device(fb_info); if (fb_info->pixmap.addr == NULL) { fb_info->pixmap.addr = kmalloc(FBPIXMAPSIZE, GFP_KERNEL); @@ -1356,8 +1356,8 @@ unregister_framebuffer(struct fb_info *fb_info) fb_destroy_modelist(&fb_info->modelist); registered_fb[i]=NULL; num_registered_fb--; - fb_cleanup_class_device(fb_info); - class_device_destroy(fb_class, MKDEV(FB_MAJOR, i)); + fb_cleanup_device(fb_info); + device_destroy(fb_class, MKDEV(FB_MAJOR, i)); event.info = fb_info; fb_notifier_call_chain(FB_EVENT_FB_UNREGISTERED, &event); return 0; diff --git a/drivers/video/fbsysfs.c b/drivers/video/fbsysfs.c index d3a50417ed9..323bdf6fc7d 100644 --- a/drivers/video/fbsysfs.c +++ b/drivers/video/fbsysfs.c @@ -73,7 +73,7 @@ EXPORT_SYMBOL(framebuffer_alloc); * * @info: frame buffer info structure * - * Drop the reference count of the class_device embedded in the + * Drop the reference count of the device embedded in the * framebuffer info structure. * */ @@ -120,10 +120,10 @@ static int mode_string(char *buf, unsigned int offset, m, mode->xres, mode->yres, v, mode->refresh); } -static ssize_t store_mode(struct class_device *class_device, const char * buf, - size_t count) +static ssize_t store_mode(struct device *device, struct device_attribute *attr, + const char *buf, size_t count) { - struct fb_info *fb_info = class_get_devdata(class_device); + struct fb_info *fb_info = dev_get_drvdata(device); char mstr[100]; struct fb_var_screeninfo var; struct fb_modelist *modelist; @@ -151,9 +151,10 @@ static ssize_t store_mode(struct class_device *class_device, const char * buf, return -EINVAL; } -static ssize_t show_mode(struct class_device *class_device, char *buf) +static ssize_t show_mode(struct device *device, struct device_attribute *attr, + char *buf) { - struct fb_info *fb_info = class_get_devdata(class_device); + struct fb_info *fb_info = dev_get_drvdata(device); if (!fb_info->mode) return 0; @@ -161,10 +162,11 @@ static ssize_t show_mode(struct class_device *class_device, char *buf) return mode_string(buf, 0, fb_info->mode); } -static ssize_t store_modes(struct class_device *class_device, const char * buf, - size_t count) +static ssize_t store_modes(struct device *device, + struct device_attribute *attr, + const char *buf, size_t count) { - struct fb_info *fb_info = class_get_devdata(class_device); + struct fb_info *fb_info = dev_get_drvdata(device); LIST_HEAD(old_list); int i = count / sizeof(struct fb_videomode); @@ -186,9 +188,10 @@ static ssize_t store_modes(struct class_device *class_device, const char * buf, return 0; } -static ssize_t show_modes(struct class_device *class_device, char *buf) +static ssize_t show_modes(struct device *device, struct device_attribute *attr, + char *buf) { - struct fb_info *fb_info = class_get_devdata(class_device); + struct fb_info *fb_info = dev_get_drvdata(device); unsigned int i; struct list_head *pos; struct fb_modelist *modelist; @@ -203,10 +206,10 @@ static ssize_t show_modes(struct class_device *class_device, char *buf) return i; } -static ssize_t store_bpp(struct class_device *class_device, const char * buf, - size_t count) +static ssize_t store_bpp(struct device *device, struct device_attribute *attr, + const char *buf, size_t count) { - struct fb_info *fb_info = class_get_devdata(class_device); + struct fb_info *fb_info = dev_get_drvdata(device); struct fb_var_screeninfo var; char ** last = NULL; int err; @@ -218,16 +221,18 @@ static ssize_t store_bpp(struct class_device *class_device, const char * buf, return count; } -static ssize_t show_bpp(struct class_device *class_device, char *buf) +static ssize_t show_bpp(struct device *device, struct device_attribute *attr, + char *buf) { - struct fb_info *fb_info = class_get_devdata(class_device); + struct fb_info *fb_info = dev_get_drvdata(device); return snprintf(buf, PAGE_SIZE, "%d\n", fb_info->var.bits_per_pixel); } -static ssize_t store_rotate(struct class_device *class_device, const char *buf, - size_t count) +static ssize_t store_rotate(struct device *device, + struct device_attribute *attr, + const char *buf, size_t count) { - struct fb_info *fb_info = class_get_devdata(class_device); + struct fb_info *fb_info = dev_get_drvdata(device); struct fb_var_screeninfo var; char **last = NULL; int err; @@ -242,17 +247,19 @@ static ssize_t store_rotate(struct class_device *class_device, const char *buf, } -static ssize_t show_rotate(struct class_device *class_device, char *buf) +static ssize_t show_rotate(struct device *device, + struct device_attribute *attr, char *buf) { - struct fb_info *fb_info = class_get_devdata(class_device); + struct fb_info *fb_info = dev_get_drvdata(device); return snprintf(buf, PAGE_SIZE, "%d\n", fb_info->var.rotate); } -static ssize_t store_virtual(struct class_device *class_device, - const char * buf, size_t count) +static ssize_t store_virtual(struct device *device, + struct device_attribute *attr, + const char *buf, size_t count) { - struct fb_info *fb_info = class_get_devdata(class_device); + struct fb_info *fb_info = dev_get_drvdata(device); struct fb_var_screeninfo var; char *last = NULL; int err; @@ -269,23 +276,26 @@ static ssize_t store_virtual(struct class_device *class_device, return count; } -static ssize_t show_virtual(struct class_device *class_device, char *buf) +static ssize_t show_virtual(struct device *device, + struct device_attribute *attr, char *buf) { - struct fb_info *fb_info = class_get_devdata(class_device); + struct fb_info *fb_info = dev_get_drvdata(device); return snprintf(buf, PAGE_SIZE, "%d,%d\n", fb_info->var.xres_virtual, fb_info->var.yres_virtual); } -static ssize_t show_stride(struct class_device *class_device, char *buf) +static ssize_t show_stride(struct device *device, + struct device_attribute *attr, char *buf) { - struct fb_info *fb_info = class_get_devdata(class_device); + struct fb_info *fb_info = dev_get_drvdata(device); return snprintf(buf, PAGE_SIZE, "%d\n", fb_info->fix.line_length); } -static ssize_t store_blank(struct class_device *class_device, const char * buf, - size_t count) +static ssize_t store_blank(struct device *device, + struct device_attribute *attr, + const char *buf, size_t count) { - struct fb_info *fb_info = class_get_devdata(class_device); + struct fb_info *fb_info = dev_get_drvdata(device); char *last = NULL; int err; @@ -299,42 +309,48 @@ static ssize_t store_blank(struct class_device *class_device, const char * buf, return count; } -static ssize_t show_blank(struct class_device *class_device, char *buf) +static ssize_t show_blank(struct device *device, + struct device_attribute *attr, char *buf) { -// struct fb_info *fb_info = class_get_devdata(class_device); +// struct fb_info *fb_info = dev_get_drvdata(device); return 0; } -static ssize_t store_console(struct class_device *class_device, - const char * buf, size_t count) +static ssize_t store_console(struct device *device, + struct device_attribute *attr, + const char *buf, size_t count) { -// struct fb_info *fb_info = class_get_devdata(class_device); +// struct fb_info *fb_info = dev_get_drvdata(device); return 0; } -static ssize_t show_console(struct class_device *class_device, char *buf) +static ssize_t show_console(struct device *device, + struct device_attribute *attr, char *buf) { -// struct fb_info *fb_info = class_get_devdata(class_device); +// struct fb_info *fb_info = dev_get_drvdata(device); return 0; } -static ssize_t store_cursor(struct class_device *class_device, - const char * buf, size_t count) +static ssize_t store_cursor(struct device *device, + struct device_attribute *attr, + const char *buf, size_t count) { -// struct fb_info *fb_info = class_get_devdata(class_device); +// struct fb_info *fb_info = dev_get_drvdata(device); return 0; } -static ssize_t show_cursor(struct class_device *class_device, char *buf) +static ssize_t show_cursor(struct device *device, + struct device_attribute *attr, char *buf) { -// struct fb_info *fb_info = class_get_devdata(class_device); +// struct fb_info *fb_info = dev_get_drvdata(device); return 0; } -static ssize_t store_pan(struct class_device *class_device, const char * buf, - size_t count) +static ssize_t store_pan(struct device *device, + struct device_attribute *attr, + const char *buf, size_t count) { - struct fb_info *fb_info = class_get_devdata(class_device); + struct fb_info *fb_info = dev_get_drvdata(device); struct fb_var_screeninfo var; char *last = NULL; int err; @@ -355,24 +371,27 @@ static ssize_t store_pan(struct class_device *class_device, const char * buf, return count; } -static ssize_t show_pan(struct class_device *class_device, char *buf) +static ssize_t show_pan(struct device *device, + struct device_attribute *attr, char *buf) { - struct fb_info *fb_info = class_get_devdata(class_device); + struct fb_info *fb_info = dev_get_drvdata(device); return snprintf(buf, PAGE_SIZE, "%d,%d\n", fb_info->var.xoffset, fb_info->var.xoffset); } -static ssize_t show_name(struct class_device *class_device, char *buf) +static ssize_t show_name(struct device *device, + struct device_attribute *attr, char *buf) { - struct fb_info *fb_info = class_get_devdata(class_device); + struct fb_info *fb_info = dev_get_drvdata(device); return snprintf(buf, PAGE_SIZE, "%s\n", fb_info->fix.id); } -static ssize_t store_fbstate(struct class_device *class_device, - const char *buf, size_t count) +static ssize_t store_fbstate(struct device *device, + struct device_attribute *attr, + const char *buf, size_t count) { - struct fb_info *fb_info = class_get_devdata(class_device); + struct fb_info *fb_info = dev_get_drvdata(device); u32 state; char *last = NULL; @@ -385,17 +404,19 @@ static ssize_t store_fbstate(struct class_device *class_device, return count; } -static ssize_t show_fbstate(struct class_device *class_device, char *buf) +static ssize_t show_fbstate(struct device *device, + struct device_attribute *attr, char *buf) { - struct fb_info *fb_info = class_get_devdata(class_device); + struct fb_info *fb_info = dev_get_drvdata(device); return snprintf(buf, PAGE_SIZE, "%d\n", fb_info->state); } #ifdef CONFIG_FB_BACKLIGHT -static ssize_t store_bl_curve(struct class_device *class_device, - const char *buf, size_t count) +static ssize_t store_bl_curve(struct device *device, + struct device_attribute *attr, + const char *buf, size_t count) { - struct fb_info *fb_info = class_get_devdata(class_device); + struct fb_info *fb_info = dev_get_drvdata(device); u8 tmp_curve[FB_BACKLIGHT_LEVELS]; unsigned int i; @@ -432,9 +453,10 @@ static ssize_t store_bl_curve(struct class_device *class_device, return count; } -static ssize_t show_bl_curve(struct class_device *class_device, char *buf) +static ssize_t show_bl_curve(struct device *device, + struct device_attribute *attr, char *buf) { - struct fb_info *fb_info = class_get_devdata(class_device); + struct fb_info *fb_info = dev_get_drvdata(device); ssize_t len = 0; unsigned int i; @@ -465,7 +487,7 @@ static ssize_t show_bl_curve(struct class_device *class_device, char *buf) /* When cmap is added back in it should be a binary attribute * not a text one. Consideration should also be given to converting * fbdev to use configfs instead of sysfs */ -static struct class_device_attribute class_device_attrs[] = { +static struct device_attribute device_attrs[] = { __ATTR(bits_per_pixel, S_IRUGO|S_IWUSR, show_bpp, store_bpp), __ATTR(blank, S_IRUGO|S_IWUSR, show_blank, store_blank), __ATTR(console, S_IRUGO|S_IWUSR, show_console, store_console), @@ -483,17 +505,16 @@ static struct class_device_attribute class_device_attrs[] = { #endif }; -int fb_init_class_device(struct fb_info *fb_info) +int fb_init_device(struct fb_info *fb_info) { int i, error = 0; - class_set_devdata(fb_info->class_device, fb_info); + dev_set_drvdata(fb_info->dev, fb_info); fb_info->class_flag |= FB_SYSFS_FLAG_ATTR; - for (i = 0; i < ARRAY_SIZE(class_device_attrs); i++) { - error = class_device_create_file(fb_info->class_device, - &class_device_attrs[i]); + for (i = 0; i < ARRAY_SIZE(device_attrs); i++) { + error = device_create_file(fb_info->dev, &device_attrs[i]); if (error) break; @@ -501,22 +522,20 @@ int fb_init_class_device(struct fb_info *fb_info) if (error) { while (--i >= 0) - class_device_remove_file(fb_info->class_device, - &class_device_attrs[i]); + device_remove_file(fb_info->dev, &device_attrs[i]); fb_info->class_flag &= ~FB_SYSFS_FLAG_ATTR; } return 0; } -void fb_cleanup_class_device(struct fb_info *fb_info) +void fb_cleanup_device(struct fb_info *fb_info) { unsigned int i; if (fb_info->class_flag & FB_SYSFS_FLAG_ATTR) { - for (i = 0; i < ARRAY_SIZE(class_device_attrs); i++) - class_device_remove_file(fb_info->class_device, - &class_device_attrs[i]); + for (i = 0; i < ARRAY_SIZE(device_attrs); i++) + device_remove_file(fb_info->dev, &device_attrs[i]); fb_info->class_flag &= ~FB_SYSFS_FLAG_ATTR; } |