diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/mfd/Kconfig | 38 | ||||
| -rw-r--r-- | drivers/mfd/Makefile | 5 | ||||
| -rw-r--r-- | drivers/mfd/wm8350-core.c | 1273 | ||||
| -rw-r--r-- | drivers/mfd/wm8350-gpio.c | 222 | ||||
| -rw-r--r-- | drivers/mfd/wm8350-i2c.c | 120 | ||||
| -rw-r--r-- | drivers/mfd/wm8350-regmap.c | 1347 | ||||
| -rw-r--r-- | drivers/mfd/wm8400-core.c | 455 | ||||
| -rw-r--r-- | drivers/regulator/Kconfig | 24 | ||||
| -rw-r--r-- | drivers/regulator/Makefile | 3 | ||||
| -rw-r--r-- | drivers/regulator/bq24022.c | 21 | ||||
| -rw-r--r-- | drivers/regulator/core.c | 508 | ||||
| -rw-r--r-- | drivers/regulator/da903x.c | 513 | ||||
| -rw-r--r-- | drivers/regulator/wm8350-regulator.c | 1431 | ||||
| -rw-r--r-- | drivers/regulator/wm8400-regulator.c | 368 |
14 files changed, 6085 insertions, 243 deletions
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 0dae245c625..5eff8ad834d 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -87,6 +87,44 @@ config MFD_TC6393XB help Support for Toshiba Mobile IO Controller TC6393XB +config MFD_WM8400 + tristate "Support Wolfson Microelectronics WM8400" + help + Support for the Wolfson Microelecronics WM8400 PMIC and audio + CODEC. This driver adds provides common support for accessing + the device, additional drivers must be enabled in order to use + the functionality of the device. + +config MFD_WM8350 + tristate + +config MFD_WM8350_CONFIG_MODE_0 + bool + depends on MFD_WM8350 + +config MFD_WM8350_CONFIG_MODE_1 + bool + depends on MFD_WM8350 + +config MFD_WM8350_CONFIG_MODE_2 + bool + depends on MFD_WM8350 + +config MFD_WM8350_CONFIG_MODE_3 + bool + depends on MFD_WM8350 + +config MFD_WM8350_I2C + tristate "Support Wolfson Microelectronics WM8350 with I2C" + select MFD_WM8350 + depends on I2C + help + The WM8350 is an integrated audio and power management + subsystem with watchdog and RTC functionality for embedded + systems. This option enables core support for the WM8350 with + I2C as the control interface. Additional options must be + selected to enable support for the functionality of the chip. + endmenu menu "Multimedia Capabilities Port drivers" diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 6abebe36441..759b1fe1c89 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -12,6 +12,11 @@ obj-$(CONFIG_MFD_T7L66XB) += t7l66xb.o obj-$(CONFIG_MFD_TC6387XB) += tc6387xb.o obj-$(CONFIG_MFD_TC6393XB) += tc6393xb.o +obj-$(CONFIG_MFD_WM8400) += wm8400-core.o +wm8350-objs := wm8350-core.o wm8350-regmap.o wm8350-gpio.o +obj-$(CONFIG_MFD_WM8350) += wm8350.o +obj-$(CONFIG_MFD_WM8350_I2C) += wm8350-i2c.o + obj-$(CONFIG_MFD_CORE) += mfd-core.o obj-$(CONFIG_MCP) += mcp-core.o diff --git a/drivers/mfd/wm8350-core.c b/drivers/mfd/wm8350-core.c new file mode 100644 index 00000000000..25a7a5d08bc --- /dev/null +++ b/drivers/mfd/wm8350-core.c @@ -0,0 +1,1273 @@ +/* + * wm8350-core.c -- Device access for Wolfson WM8350 + * + * Copyright 2007, 2008 Wolfson Microelectronics PLC. + * + * Author: Liam Girdwood, Mark Brown + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/bug.h> +#include <linux/device.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/workqueue.h> + +#include <linux/mfd/wm8350/core.h> +#include <linux/mfd/wm8350/audio.h> +#include <linux/mfd/wm8350/comparator.h> +#include <linux/mfd/wm8350/gpio.h> +#include <linux/mfd/wm8350/pmic.h> +#include <linux/mfd/wm8350/rtc.h> +#include <linux/mfd/wm8350/supply.h> +#include <linux/mfd/wm8350/wdt.h> + +#define WM8350_UNLOCK_KEY 0x0013 +#define WM8350_LOCK_KEY 0x0000 + +#define WM8350_CLOCK_CONTROL_1 0x28 +#define WM8350_AIF_TEST 0x74 + +/* debug */ +#define WM8350_BUS_DEBUG 0 +#if WM8350_BUS_DEBUG +#define dump(regs, src) do { \ + int i_; \ + u16 *src_ = src; \ + printk(KERN_DEBUG); \ + for (i_ = 0; i_ < regs; i_++) \ + printk(" 0x%4.4x", *src_++); \ + printk("\n"); \ +} while (0); +#else +#define dump(bytes, src) +#endif + +#define WM8350_LOCK_DEBUG 0 +#if WM8350_LOCK_DEBUG +#define ldbg(format, arg...) printk(format, ## arg) +#else +#define ldbg(format, arg...) +#endif + +/* + * WM8350 Device IO + */ +static DEFINE_MUTEX(io_mutex); +static DEFINE_MUTEX(reg_lock_mutex); +static DEFINE_MUTEX(auxadc_mutex); + +/* Perform a physical read from the device. + */ +static int wm8350_phys_read(struct wm8350 *wm8350, u8 reg, int num_regs, + u16 *dest) +{ + int i, ret; + int bytes = num_regs * 2; + + dev_dbg(wm8350->dev, "volatile read\n"); + ret = wm8350->read_dev(wm8350, reg, bytes, (char *)dest); + + for (i = reg; i < reg + num_regs; i++) { + /* Cache is CPU endian */ + dest[i - reg] = be16_to_cpu(dest[i - reg]); + + /* Satisfy non-volatile bits from cache */ + dest[i - reg] &= wm8350_reg_io_map[i].vol; + dest[i - reg] |= wm8350->reg_cache[i]; + + /* Mask out non-readable bits */ + dest[i - reg] &= wm8350_reg_io_map[i].readable; + } + + dump(num_regs, dest); + + return ret; +} + +static int wm8350_read(struct wm8350 *wm8350, u8 reg, int num_regs, u16 *dest) +{ + int i; + int end = reg + num_regs; + int ret = 0; + int bytes = num_regs * 2; + + if (wm8350->read_dev == NULL) + return -ENODEV; + + if ((reg + num_regs - 1) > WM8350_MAX_REGISTER) { + dev_err(wm8350->dev, "invalid reg %x\n", + reg + num_regs - 1); + return -EINVAL; + } + + dev_dbg(wm8350->dev, + "%s R%d(0x%2.2x) %d regs\n", __func__, reg, reg, num_regs); + +#if WM8350_BUS_DEBUG + /* we can _safely_ read any register, but warn if read not supported */ + for (i = reg; i < end; i++) { + if (!wm8350_reg_io_map[i].readable) + dev_warn(wm8350->dev, + "reg R%d is not readable\n", i); + } +#endif + + /* if any volatile registers are required, then read back all */ + for (i = reg; i < end; i++) + if (wm8350_reg_io_map[i].vol) + return wm8350_phys_read(wm8350, reg, num_regs, dest); + + /* no volatiles, then cache is good */ + dev_dbg(wm8350->dev, "cache read\n"); + memcpy(dest, &wm8350->reg_cache[reg], bytes); + dump(num_regs, dest); + return ret; +} + +static inline int is_reg_locked(struct wm8350 *wm8350, u8 reg) +{ + if (reg == WM8350_SECURITY || + wm8350->reg_cache[WM8350_SECURITY] == WM8350_UNLOCK_KEY) + return 0; + + if ((reg == WM8350_GPIO_CONFIGURATION_I_O) || + (reg >= WM8350_GPIO_FUNCTION_SELECT_1 && + reg <= WM8350_GPIO_FUNCTION_SELECT_4) || + (reg >= WM8350_BATTERY_CHARGER_CONTROL_1 && + reg <= WM8350_BATTERY_CHARGER_CONTROL_3)) + return 1; + return 0; +} + +static int wm8350_write(struct wm8350 *wm8350, u8 reg, int num_regs, u16 *src) +{ + int i; + int end = reg + num_regs; + int bytes = num_regs * 2; + + if (wm8350->write_dev == NULL) + return -ENODEV; + + if ((reg + num_regs - 1) > WM8350_MAX_REGISTER) { + dev_err(wm8350->dev, "invalid reg %x\n", + reg + num_regs - 1); + return -EINVAL; + } + + /* it's generally not a good idea to write to RO or locked registers */ + for (i = reg; i < end; i++) { + if (!wm8350_reg_io_map[i].writable) { + dev_err(wm8350->dev, + "attempted write to read only reg R%d\n", i); + return -EINVAL; + } + + if (is_reg_locked(wm8350, i)) { + dev_err(wm8350->dev, + "attempted write to locked reg R%d\n", i); + return -EINVAL; + } + + src[i - reg] &= wm8350_reg_io_map[i].writable; + + wm8350->reg_cache[i] = + (wm8350->reg_cache[i] & ~wm8350_reg_io_map[i].writable) + | src[i - reg]; + + src[i - reg] = cpu_to_be16(src[i - reg]); + } + + /* Actually write it out */ + return wm8350->write_dev(wm8350, reg, bytes, (char *)src); +} + +/* + * Safe read, modify, write methods + */ +int wm8350_clear_bits(struct wm8350 *wm8350, u16 reg, u16 mask) +{ + u16 data; + int err; + + mutex_lock(&io_mutex); + err = wm8350_read(wm8350, reg, 1, &data); + if (err) { + dev_err(wm8350->dev, "read from reg R%d failed\n", reg); + goto out; + } + + data &= ~mask; + err = wm8350_write(wm8350, reg, 1, &data); + if (err) + dev_err(wm8350->dev, "write to reg R%d failed\n", reg); +out: + mutex_unlock(&io_mutex); + return err; +} +EXPORT_SYMBOL_GPL(wm8350_clear_bits); + +int wm8350_set_bits(struct wm8350 *wm8350, u16 reg, u16 mask) +{ + u16 data; + int err; + + mutex_lock(&io_mutex); + err = wm8350_read(wm8350, reg, 1, &data); + if (err) { + dev_err(wm8350->dev, "read from reg R%d failed\n", reg); + goto out; + } + + data |= mask; + err = wm8350_write(wm8350, reg, 1, &data); + if (err) + dev_err(wm8350->dev, "write to reg R%d failed\n", reg); +out: + mutex_unlock(&io_mutex); + return err; +} +EXPORT_SYMBOL_GPL(wm8350_set_bits); + +u16 wm8350_reg_read(struct wm8350 *wm8350, int reg) +{ + u16 data; + int err; + + mutex_lock(&io_mutex); + err = wm8350_read(wm8350, reg, 1, &data); + if (err) + dev_err(wm8350->dev, "read from reg R%d failed\n", reg); + + mutex_unlock(&io_mutex); + return data; +} +EXPORT_SYMBOL_GPL(wm8350_reg_read); + +int wm8350_reg_write(struct wm8350 *wm8350, int reg, u16 val) +{ + int ret; + u16 data = val; + + mutex_lock(&io_mutex); + ret = wm8350_write(wm8350, reg, 1, &data); + if (ret) + dev_err(wm8350->dev, "write to reg R%d failed\n", reg); + mutex_unlock(&io_mutex); + return ret; +} +EXPORT_SYMBOL_GPL(wm8350_reg_write); + +int wm8350_block_read(struct wm8350 *wm8350, int start_reg, int regs, + u16 *dest) +{ + int err = 0; + + mutex_lock(&io_mutex); + err = wm8350_read(wm8350, start_reg, regs, dest); + if (err) + dev_err(wm8350->dev, "block read starting from R%d failed\n", + start_reg); + mutex_unlock(&io_mutex); + return err; +} +EXPORT_SYMBOL_GPL(wm8350_block_read); + +int wm8350_block_write(struct wm8350 *wm8350, int start_reg, int regs, + u16 *src) +{ + int ret = 0; + + mutex_lock(&io_mutex); + ret = wm8350_write(wm8350, start_reg, regs, src); + if (ret) + dev_err(wm8350->dev, "block write starting at R%d failed\n", + start_reg); + mutex_unlock(&io_mutex); + return ret; +} +EXPORT_SYMBOL_GPL(wm8350_block_write); + +int wm8350_reg_lock(struct wm8350 *wm8350) +{ + u16 key = WM8350_LOCK_KEY; + int ret; + + ldbg(__func__); + mutex_lock(&io_mutex); + ret = wm8350_write(wm8350, WM8350_SECURITY, 1, &key); + if (ret) + dev_err(wm8350->dev, "lock failed\n"); + mutex_unlock(&io_mutex); + return ret; +} +EXPORT_SYMBOL_GPL(wm8350_reg_lock); + +int wm8350_reg_unlock(struct wm8350 *wm8350) +{ + u16 key = WM8350_UNLOCK_KEY; + int ret; + + ldbg(__func__); + mutex_lock(&io_mutex); + ret = wm8350_write(wm8350, WM8350_SECURITY, 1, &key); + if (ret) + dev_err(wm8350->dev, "unlock failed\n"); + mutex_unlock(&io_mutex); + return ret; +} +EXPORT_SYMBOL_GPL(wm8350_reg_unlock); + +static void wm8350_irq_call_handler(struct wm8350 *wm8350, int irq) +{ + mutex_lock(&wm8350->irq_mutex); + + if (wm8350->irq[irq].handler) + wm8350->irq[irq].handler(wm8350, irq, wm8350->irq[irq].data); + else { + dev_err(wm8350->dev, "irq %d nobody cared. now masked.\n", + irq); + wm8350_mask_irq(wm8350, irq); + } + + mutex_unlock(&wm8350->irq_mutex); +} + +/* + * wm8350_irq_worker actually handles the interrupts. Since all + * interrupts are clear on read the IRQ line will be reasserted and + * the physical IRQ will be handled again if another interrupt is + * asserted while we run - in the normal course of events this is a + * rare occurrence so we save I2C/SPI reads. + */ +static void wm8350_irq_worker(struct work_struct *work) +{ + struct wm8350 *wm8350 = container_of(work, struct wm8350, irq_work); + u16 level_one, status1, status2, comp; + + /* TODO: Use block reads to improve performance? */ + level_one = wm8350_reg_read(wm8350, WM8350_SYSTEM_INTERRUPTS) + & ~wm8350_reg_read(wm8350, WM8350_SYSTEM_INTERRUPTS_MASK); + status1 = wm8350_reg_read(wm8350, WM8350_INT_STATUS_1) + & ~wm8350_reg_read(wm8350, WM8350_INT_STATUS_1_MASK); + status2 = wm8350_reg_read(wm8350, WM8350_INT_STATUS_2) + & ~wm8350_reg_read(wm8350, WM8350_INT_STATUS_2_MASK); + comp = wm8350_reg_read(wm8350, WM8350_COMPARATOR_INT_STATUS) + & ~wm8350_reg_read(wm8350, WM8350_COMPARATOR_INT_STATUS_MASK); + + /* over current */ + if (level_one & WM8350_OC_INT) { + u16 oc; + + oc = wm8350_reg_read(wm8350, WM8350_OVER_CURRENT_INT_STATUS); + oc &= ~wm8350_reg_read(wm8350, + WM8350_OVER_CURRENT_INT_STATUS_MASK); + + if (oc & WM8350_OC_LS_EINT) /* limit switch */ + wm8350_irq_call_handler(wm8350, WM8350_IRQ_OC_LS); + } + + /* under voltage */ + if (level_one & WM8350_UV_INT) { + u16 uv; + + uv = wm8350_reg_read(wm8350, WM8350_UNDER_VOLTAGE_INT_STATUS); + uv &= ~wm8350_reg_read(wm8350, + WM8350_UNDER_VOLTAGE_INT_STATUS_MASK); + + if (uv & WM8350_UV_DC1_EINT) + wm8350_irq_call_handler(wm8350, WM8350_IRQ_UV_DC1); + if (uv & WM8350_UV_DC2_EINT) + wm8350_irq_call_handler(wm8350, WM8350_IRQ_UV_DC2); + if (uv & WM8350_UV_DC3_EINT) + wm8350_irq_call_handler(wm8350, WM8350_IRQ_UV_DC3); + if (uv & WM8350_UV_DC4_EINT) + wm8350_irq_call_handler(wm8350, WM8350_IRQ_UV_DC4); + if (uv & WM8350_UV_DC5_EINT) + wm8350_irq_call_handler(wm8350, WM8350_IRQ_UV_DC5); + if (uv & WM8350_UV_DC6_EINT) + wm8350_irq_call_handler(wm8350, WM8350_IRQ_UV_DC6); + if (uv & WM8350_UV_LDO1_EINT) + wm8350_irq_call_handler(wm8350, WM8350_IRQ_UV_LDO1); + if (uv & WM8350_UV_LDO2_EINT) + wm8350_irq_call_handler(wm8350, WM8350_IRQ_UV_LDO2); + if (uv & WM8350_UV_LDO3_EINT) + wm8350_irq_call_handler(wm8350, WM8350_IRQ_UV_LDO3); + if (uv & WM8350_UV_LDO4_EINT) + wm8350_irq_call_handler(wm8350, WM8350_IRQ_UV_LDO4); + } + + /* charger, RTC */ + if (status1) { + if (status1 & WM8350_CHG_BAT_HOT_EINT) + wm8350_irq_call_handler(wm8350, + WM8350_IRQ_CHG_BAT_HOT); + if (status1 & WM8350_CHG_BAT_COLD_EINT) + wm8350_irq_call_handler(wm8350, + WM8350_IRQ_CHG_BAT_COLD); + if (status1 & WM8350_CHG_BAT_FAIL_EINT) + wm8350_irq_call_handler(wm8350, + WM8350_IRQ_CHG_BAT_FAIL); + if (status1 & WM8350_CHG_TO_EINT) + wm8350_irq_call_handler(wm8350, WM8350_IRQ_CHG_TO); + if (status1 & WM8350_CHG_END_EINT) + wm8350_irq_call_handler(wm8350, WM8350_IRQ_CHG_END); + if (status1 & WM8350_CHG_START_EINT) + wm8350_irq_call_handler(wm8350, WM8350_IRQ_CHG_START); + if (status1 & WM8350_CHG_FAST_RDY_EINT) + wm8350_irq_call_handler(wm8350, + WM8350_IRQ_CHG_FAST_RDY); + if (status1 & WM8350_CHG_VBATT_LT_3P9_EINT) + wm8350_irq_call_handler(wm8350, + WM8350_IRQ_CHG_VBATT_LT_3P9); + if (status1 & WM8350_CHG_VBATT_LT_3P1_EINT) + wm8350_irq_call_handler(wm8350, + WM8350_IRQ_CHG_VBATT_LT_3P1); + if (status1 & WM8350_CHG_VBATT_LT_2P85_EINT) + wm8350_irq_call_handler(wm8350, + WM8350_IRQ_CHG_VBATT_LT_2P85); + if (status1 & WM8350_RTC_ALM_EINT) + wm8350_irq_call_handler(wm8350, WM8350_IRQ_RTC_ALM); + if (status1 & WM8350_RTC_SEC_EINT) + wm8350_irq_call_handler(wm8350, WM8350_IRQ_RTC_SEC); + if (status1 & WM8350_RTC_PER_EINT) + wm8350_irq_call_handler(wm8350, WM8350_IRQ_RTC_PER); + } + + /* current sink, system, aux adc */ + if (status2) { + if (status2 & WM8350_CS1_EINT) + wm8350_irq_call_handler(wm8350, WM8350_IRQ_CS1); + if (status2 & WM8350_CS2_EINT) + wm8350_irq_call_handler(wm8350, WM8350_IRQ_CS2); + + if (status2 & WM8350_SYS_HYST_COMP_FAIL_EINT) + wm8350_irq_call_handler(wm8350, + WM8350_IRQ_SYS_HYST_COMP_FAIL); + if (status2 & WM8350_SYS_CHIP_GT115_EINT) + wm8350_irq_call_handler(wm8350, + WM8350_IRQ_SYS_CHIP_GT115); + if (status2 & WM8350_SYS_CHIP_GT140_EINT) + wm8350_irq_call_handler(wm8350, + WM8350_IRQ_SYS_CHIP_GT140); + if (status2 & WM8350_SYS_WDOG_TO_EINT) + wm8350_irq_call_handler(wm8350, + WM8350_IRQ_SYS_WDOG_TO); + + if (status2 & WM8350_AUXADC_DATARDY_EINT) + wm8350_irq_call_handler(wm8350, + WM8350_IRQ_AUXADC_DATARDY); + if (status2 & WM8350_AUXADC_DCOMP4_EINT) + wm8350_irq_call_handler(wm8350, + WM8350_IRQ_AUXADC_DCOMP4); + if (status2 & WM8350_AUXADC_DCOMP3_EINT) + wm8350_irq_call_handler(wm8350, + WM8350_IRQ_AUXADC_DCOMP3); + if (status2 & WM8350_AUXADC_DCOMP2_EINT) + wm8350_irq_call_handler(wm8350, + WM8350_IRQ_AUXADC_DCOMP2); + if (status2 & WM8350_AUXADC_DCOMP1_EINT) + wm8350_irq_call_handler(wm8350, + WM8350_IRQ_AUXADC_DCOMP1); + + if (status2 & WM8350_USB_LIMIT_EINT) + wm8350_irq_call_handler(wm8350, WM8350_IRQ_USB_LIMIT); + } + + /* wake, codec, ext */ + if (comp) { + if (comp & WM8350_WKUP_OFF_STATE_EINT) + wm8350_irq_call_handler(wm8350, + WM8350_IRQ_WKUP_OFF_STATE); + if (comp & WM8350_WKUP_HIB_STATE_EINT) + wm8350_irq_call_handler(wm8350, + WM8350_IRQ_WKUP_HIB_STATE); + if (comp & WM8350_WKUP_CONV_FAULT_EINT) + wm8350_irq_call_handler(wm8350, + WM8350_IRQ_WKUP_CONV_FAULT); + if (comp & WM8350_WKUP_WDOG_RST_EINT) + wm8350_irq_call_handler(wm8350, + WM8350_IRQ_WKUP_WDOG_RST); + if (comp & WM8350_WKUP_GP_PWR_ON_EINT) + wm8350_irq_call_handler(wm8350, + WM8350_IRQ_WKUP_GP_PWR_ON); + if (comp & WM8350_WKUP_ONKEY_EINT) + wm8350_irq_call_handler(wm8350, WM8350_IRQ_WKUP_ONKEY); + if (comp & WM8350_WKUP_GP_WAKEUP_EINT) + wm8350_irq_call_handler(wm8350, + WM8350_IRQ_WKUP_GP_WAKEUP); + + if (comp & WM8350_CODEC_JCK_DET_L_EINT) + wm8350_irq_call_handler(wm8350, + WM8350_IRQ_CODEC_JCK_DET_L); + if (comp & WM8350_CODEC_JCK_DET_R_EINT) + wm8350_irq_call_handler(wm8350, + WM8350_IRQ_CODEC_JCK_DET_R); + if (comp & WM8350_CODEC_MICSCD_EINT) + wm8350_irq_call_handler(wm8350, + WM8350_IRQ_CODEC_MICSCD); + if (comp & WM8350_CODEC_MICD_EINT) + wm8350_irq_call_handler(wm8350, WM8350_IRQ_CODEC_MICD); + + if (comp & WM8350_EXT_USB_FB_EINT) + wm8350_irq_call_handler(wm8350, WM8350_IRQ_EXT_USB_FB); + if (comp & WM8350_EXT_WALL_FB_EINT) + wm8350_irq_call_handler(wm8350, + WM8350_IRQ_EXT_WALL_FB); + if (comp & WM8350_EXT_BAT_FB_EINT) + wm8350_irq_call_handler(wm8350, WM8350_IRQ_EXT_BAT_FB); + } + + if (level_one & WM8350_GP_INT) { + int i; + u16 gpio; + + gpio = wm8350_reg_read(wm8350, WM8350_GPIO_INT_STATUS); + gpio &= ~wm8350_reg_read(wm8350, + WM8350_GPIO_INT_STATUS_MASK); + + for (i = 0; i < 12; i++) { + if (gpio & (1 << i)) + wm8350_irq_call_handler(wm8350, + WM8350_IRQ_GPIO(i)); + } + } + + enable_irq(wm8350->chip_irq); +} + +static irqreturn_t wm8350_irq(int irq, void *data) +{ + struct wm8350 *wm8350 = data; + + disable_irq_nosync(irq); + schedule_work(&wm8350->irq_work); + + return IRQ_HANDLED; +} + +int wm8350_register_irq(struct wm8350 *wm8350, int irq, + void (*handler) (struct wm8350 *, int, void *), + void *data) +{ + if (irq < 0 || irq > WM8350_NUM_IRQ || !handler) + return -EINVAL; + + if (wm8350->irq[irq].handler) + return -EBUSY; + + mutex_lock(&wm8350->irq_mutex); + wm8350->irq[irq].handler = handler; + wm8350->irq[irq].data = data; + mutex_unlock(&wm8350->irq_mutex); + + return 0; +} +EXPORT_SYMBOL_GPL(wm8350_register_irq); + +int wm8350_free_irq(struct wm8350 *wm8350, int irq) +{ + if (irq < 0 || irq > WM8350_NUM_IRQ) + return -EINVAL; + + mutex_lock(&wm8350->irq_mutex); + wm8350->irq[irq].handler = NULL; + mutex_unlock(&wm8350->irq_mutex); + return 0; +} +EXPORT_SYMBOL_GPL(wm8350_free_irq); + +int wm8350_mask_irq(struct wm8350 *wm8350, int irq) +{ + switch (irq) { + case WM8350_IRQ_CHG_BAT_HOT: + return wm8350_set_bits(wm8350, WM8350_INT_STATUS_1_MASK, + WM8350_IM_CHG_BAT_HOT_EINT); + case WM8350_IRQ_CHG_BAT_COLD: + return wm8350_set_bits(wm8350, WM8350_INT_STATUS_1_MASK, + WM8350_IM_CHG_BAT_COLD_EINT); + case WM8350_IRQ_CHG_BAT_FAIL: + return wm8350_set_bits(wm8350, WM8350_INT_STATUS_1_MASK, + WM8350_IM_CHG_BAT_FAIL_EINT); + case WM8350_IRQ_CHG_TO: + return wm8350_set_bits(wm8350, WM8350_INT_STATUS_1_MASK, + WM8350_IM_CHG_TO_EINT); + case WM8350_IRQ_CHG_END: + return wm8350_set_bits(wm8350, WM8350_INT_STATUS_1_MASK, + WM8350_IM_CHG_END_EINT); + case WM8350_IRQ_CHG_START: + return wm8350_set_bits(wm8350, WM8350_INT_STATUS_1_MASK, + WM8350_IM_CHG_START_EINT); + case WM8350_IRQ_CHG_FAST_RDY: + return wm8350_set_bits(wm8350, WM8350_INT_STATUS_1_MASK, + WM8350_IM_CHG_FAST_RDY_EINT); + case WM8350_IRQ_RTC_PER: + return wm8350_set_bits(wm8350, WM8350_INT_STATUS_1_MASK, + WM8350_IM_RTC_PER_EINT); + case WM8350_IRQ_RTC_SEC: + return wm8350_set_bits(wm8350, WM8350_INT_STATUS_1_MASK, + WM8350_IM_RTC_SEC_EINT); + case WM8350_IRQ_RTC_ALM: + return wm8350_set_bits(wm8350, WM8350_INT_STATUS_1_MASK, + WM8350_IM_RTC_ALM_EINT); + case WM8350_IRQ_CHG_VBATT_LT_3P9: + return wm8350_set_bits(wm8350, WM8350_INT_STATUS_1_MASK, + WM8350_IM_CHG_VBATT_LT_3P9_EINT); + case WM8350_IRQ_CHG_VBATT_LT_3P1: + return wm8350_set_bits(wm8350, WM8350_INT_STATUS_1_MASK, + WM8350_IM_CHG_VBATT_LT_3P1_EINT); + case WM8350_IRQ_CHG_VBATT_LT_2P85: + return wm8350_set_bits(wm8350, WM8350_INT_STATUS_1_MASK, + WM8350_IM_CHG_VBATT_LT_2P85_EINT); + case WM8350_IRQ_CS1: + return wm8350_set_bits(wm8350, WM8350_INT_STATUS_2_MASK, + WM8350_IM_CS1_EINT); + case WM8350_IRQ_CS2: + return wm8350_set_bits(wm8350, WM8350_INT_STATUS_2_MASK, + WM8350_IM_CS2_EINT); + case WM8350_IRQ_USB_LIMIT: + return wm8350_set_bits(wm8350, WM8350_INT_STATUS_2_MASK, + WM8350_IM_USB_LIMIT_EINT); + case WM8350_IRQ_AUXADC_DATARDY: + return wm8350_set_bits(wm8350, WM8350_INT_STATUS_2_MASK, + WM8350_IM_AUXADC_DATARDY_EINT); + case WM8350_IRQ_AUXADC_DCOMP4: + return wm8350_set_bits(wm8350, WM8350_INT_STATUS_2_MASK, + WM8350_IM_AUXADC_DCOMP4_EINT); + case WM8350_IRQ_AUXADC_DCOMP3: + return wm8350_set_bits(wm8350, WM8350_INT_STATUS_2_MASK, + WM8350_IM_AUXADC_DCOMP3_EINT); + case WM8350_IRQ_AUXADC_DCOMP2: + return wm8350_set_bits(wm8350, WM8350_INT_STATUS_2_MASK, + WM8350_IM_AUXADC_DCOMP2_EINT); + case WM8350_IRQ_AUXADC_DCOMP1: + return wm8350_set_bits(wm8350, WM8350_INT_STATUS_2_MASK, + WM8350_IM_AUXADC_DCOMP1_EINT); + case WM8350_IRQ_SYS_HYST_COMP_FAIL: + return wm8350_set_bits(wm8350, WM8350_INT_STATUS_2_MASK, + WM8350_IM_SYS_HYST_COMP_FAIL_EINT); + case WM8350_IRQ_SYS_CHIP_GT115: + return wm8350_set_bits(wm8350, WM8350_INT_STATUS_2_MASK, + WM8350_IM_SYS_CHIP_GT115_EINT); + case WM8350_IRQ_SYS_CHIP_GT140: + return wm8350_set_bits(wm8350, WM8350_INT_STATUS_2_MASK, + WM8350_IM_SYS_CHIP_GT140_EINT); + case WM8350_IRQ_SYS_WDOG_TO: + return wm8350_set_bits(wm8350, WM8350_INT_STATUS_2_MASK, + WM8350_IM_SYS_WDOG_TO_EINT); + case WM8350_IRQ_UV_LDO4: + return wm8350_set_bits(wm8350, + WM8350_UNDER_VOLTAGE_INT_STATUS_MASK, + WM8350_IM_UV_LDO4_EINT); + case WM8350_IRQ_UV_LDO3: + return wm8350_set_bits(wm8350, + WM8350_UNDER_VOLTAGE_INT_STATUS_MASK, + WM8350_IM_UV_LDO3_EINT); + case WM8350_IRQ_UV_LDO2: + return wm8350_set_bits(wm8350, + WM8350_UNDER_VOLTAGE_INT_STATUS_MASK, + WM8350_IM_UV_LDO2_EINT); + case WM8350_IRQ_UV_LDO1: + return wm8350_set_bits(wm8350, + WM8350_UNDER_VOLTAGE_INT_STATUS_MASK, + WM8350_IM_UV_LDO1_EINT); + case WM8350_IRQ_UV_DC6: + return wm8350_set_bits(wm8350, + WM8350_UNDER_VOLTAGE_INT_STATUS_MASK, + WM8350_IM_UV_DC6_EINT); + case WM8350_IRQ_UV_DC5: + return wm8350_set_bits(wm8350, + WM8350_UNDER_VOLTAGE_INT_STATUS_MASK, + WM8350_IM_UV_DC5_EINT); + case WM8350_IRQ_UV_DC4: + return wm8350_set_bits(wm8350, + WM8350_UNDER_VOLTAGE_INT_STATUS_MASK, + WM8350_IM_UV_DC4_EINT); + case WM8350_IRQ_UV_DC3: + return wm8350_set_bits(wm8350, + WM8350_UNDER_VOLTAGE_INT_STATUS_MASK, + WM8350_IM_UV_DC3_EINT); + case WM8350_IRQ_UV_DC2: + return wm8350_set_bits(wm8350, + WM8350_UNDER_VOLTAGE_INT_STATUS_MASK, + WM8350_IM_UV_DC2_EINT); + case WM8350_IRQ_UV_DC1: + return wm8350_set_bits(wm8350, + WM8350_UNDER_VOLTAGE_INT_STATUS_MASK, + WM8350_IM_UV_DC1_EINT); + case WM8350_IRQ_OC_LS: + return wm8350_set_bits(wm8350, + WM8350_OVER_CURRENT_INT_STATUS_MASK, + WM8350_IM_OC_LS_EINT); + case WM8350_IRQ_EXT_USB_FB: + return wm8350_set_bits(wm8350, + WM8350_COMPARATOR_INT_STATUS_MASK, + WM8350_IM_EXT_USB_FB_EINT); + case WM8350_IRQ_EXT_WALL_FB: + return wm8350_set_bits(wm8350, + WM8350_COMPARATOR_INT_STATUS_MASK, + WM8350_IM_EXT_WALL_FB_EINT); + case WM8350_IRQ_EXT_BAT_FB: + return wm8350_set_bits(wm8350, + WM8350_COMPARATOR_INT_STATUS_MASK, + WM8350_IM_EXT_BAT_FB_EINT); + case WM8350_IRQ_CODEC_JCK_DET_L: + return wm8350_set_bits(wm8350, + WM8350_COMPARATOR_INT_STATUS_MASK, + WM8350_IM_CODEC_JCK_DET_L_EINT); + case WM8350_IRQ_CODEC_JCK_DET_R: + return wm8350_set_bits(wm8350, + WM8350_COMPARATOR_INT_STATUS_MASK, + WM8350_IM_CODEC_JCK_DET_R_EINT); + case WM8350_IRQ_CODEC_MICSCD: + return wm8350_set_bits(wm8350, + WM8350_COMPARATOR_INT_STATUS_MASK, + WM8350_IM_CODEC_MICSCD_EINT); + case WM8350_IRQ_CODEC_MICD: + return wm8350_set_bits(wm8350, + WM8350_COMPARATOR_INT_STATUS_MASK, + WM8350_IM_CODEC_MICD_EINT); + case WM8350_IRQ_WKUP_OFF_STATE: + return wm8350_set_bits(wm8350, + WM8350_COMPARATOR_INT_STATUS_MASK, + WM8350_IM_WKUP_OFF_STATE_EINT); + case WM8350_IRQ_WKUP_HIB_STATE: + return wm8350_set_bits(wm8350, + WM8350_COMPARATOR_INT_STATUS_MASK, + WM8350_IM_WKUP_HIB_STATE_EINT); + case WM8350_IRQ_WKUP_CONV_FAULT: + return wm8350_set_bits(wm8350, + WM8350_COMPARATOR_INT_STATUS_MASK, + WM8350_IM_WKUP_CONV_FAULT_EINT); + case WM8350_IRQ_WKUP_WDOG_RST: + return wm8350_set_bits(wm8350, + WM8350_COMPARATOR_INT_STATUS_MASK, + WM8350_IM_WKUP_OFF_STATE_EINT); + case WM8350_IRQ_WKUP_GP_PWR_ON: + return wm8350_set_bits(wm8350, + WM8350_COMPARATOR_INT_STATUS_MASK, + WM8350_IM_WKUP_GP_PWR_ON_EINT); + case WM8350_IRQ_WKUP_ONKEY: + return wm8350_set_bits(wm8350, + WM8350_COMPARATOR_INT_STATUS_MASK, + WM8350_IM_WKUP_ONKEY_EINT); + case WM8350_IRQ_WKUP_GP_WAKEUP: + return wm8350_set_bits(wm8350, + WM8350_COMPARATOR_INT_STATUS_MASK, + WM8350_IM_WKUP_GP_WAKEUP_EINT); + case WM8350_IRQ_GPIO(0): + return wm8350_set_bits(wm8350, + WM8350_GPIO_INT_STATUS_MASK, + WM8350_IM_GP0_EINT); + case WM8350_IRQ_GPIO(1): + return wm8350_set_bits(wm8350, + WM8350_GPIO_INT_STATUS_MASK, + WM8350_IM_GP1_EINT); + case WM8350_IRQ_GPIO(2): + return wm8350_set_bits(wm8350, + WM8350_GPIO_INT_STATUS_MASK, + WM8350_IM_GP2_EINT); + case WM8350_IRQ_GPIO(3): + return wm8350_set_bits(wm8350, + WM8350_GPIO_INT_STATUS_MASK, + WM8350_IM_GP3_EINT); + case WM8350_IRQ_GPIO(4): + return wm8350_set_bits(wm8350, + WM8350_GPIO_INT_STATUS_MASK, + WM8350_IM_GP4_EINT); + case WM8350_IRQ_GPIO(5): + return wm8350_set_bits(wm8350, + WM8350_GPIO_INT_STATUS_MASK, + WM8350_IM_GP5_EINT); + case WM8350_IRQ_GPIO(6): + return wm8350_set_bits(wm8350, + WM8350_GPIO_INT_STATUS_MASK, + WM8350_IM_GP6_EINT); + case WM8350_IRQ_GPIO(7): + return wm8350_set_bits(wm8350, + WM8350_GPIO_INT_STATUS_MASK, + WM8350_IM_GP7_EINT); + case WM8350_IRQ_GPIO(8): + return wm8350_set_bits(wm8350, + WM8350_GPIO_INT_STATUS_MASK, + WM8350_IM_GP8_EINT); + case WM8350_IRQ_GPIO(9): + return wm8350_set_bits(wm8350, + WM8350_GPIO_INT_STATUS_MASK, + WM8350_IM_GP9_EINT); + case WM8350_IRQ_GPIO(10): + return wm8350_set_bits(wm8350, + WM8350_GPIO_INT_STATUS_MASK, + WM8350_IM_GP10_EINT); + case WM8350_IRQ_GPIO(11): + return wm8350_set_bits(wm8350, + WM8350_GPIO_INT_STATUS_MASK, + WM8350_IM_GP11_EINT); + case WM8350_IRQ_GPIO(12): + return wm8350_set_bits(wm8350, + WM8350_GPIO_INT_STATUS_MASK, + WM8350_IM_GP12_EINT); + default: + dev_warn(wm8350->dev, "Attempting to mask unknown IRQ %d\n", + irq); + return -EINVAL; + } + return 0; +} +EXPORT_SYMBOL_GPL(wm8350_mask_irq); + +int wm8350_unmask_irq(struct wm8350 *wm8350, int irq) +{ + switch (irq) { + case WM8350_IRQ_CHG_BAT_HOT: + return wm8350_clear_bits(wm8350, WM8350_INT_STATUS_1_MASK, + WM8350_IM_CHG_BAT_HOT_EINT); + case WM8350_IRQ_CHG_BAT_COLD: + return wm8350_clear_bits(wm8350, WM8350_INT_STATUS_1_MASK, + WM8350_IM_CHG_BAT_COLD_EINT); + case WM8350_IRQ_CHG_BAT_FAIL: + return wm8350_clear_bits(wm8350, WM8350_INT_STATUS_1_MASK, + WM8350_IM_CHG_BAT_FAIL_EINT); + case WM8350_IRQ_CHG_TO: + return wm8350_clear_bits(wm8350, WM8350_INT_STATUS_1_MASK, + WM8350_IM_CHG_TO_EINT); + case WM8350_IRQ_CHG_END: + return wm8350_clear_bits(wm8350, WM8350_INT_STATUS_1_MASK, + WM8350_IM_CHG_END_EINT); + case WM8350_IRQ_CHG_START: + return wm8350_clear_bits(wm8350, WM8350_INT_STATUS_1_MASK, + WM8350_IM_CHG_START_EINT); + case WM8350_IRQ_CHG_FAST_RDY: + return wm8350_clear_bits(wm8350, WM8350_INT_STATUS_1_MASK, + WM8350_IM_CHG_FAST_RDY_EINT); + case WM8350_IRQ_RTC_PER: + return wm8350_clear_bits(wm8350, WM8350_INT_STATUS_1_MASK, + WM8350_IM_RTC_PER_EINT); + case WM8350_IRQ_RTC_SEC: + return wm8350_clear_bits(wm8350, WM8350_INT_STATUS_1_MASK, + WM8350_IM_RTC_SEC_EINT); + case WM8350_IRQ_RTC_ALM: + return wm8350_clear_bits(wm8350, WM8350_INT_STATUS_1_MASK, + WM8350_IM_RTC_ALM_EINT); + case WM8350_IRQ_CHG_VBATT_LT_3P9: + return wm8350_clear_bits(wm8350, WM8350_INT_STATUS_1_MASK, + WM8350_IM_CHG_VBATT_LT_3P9_EINT); + case WM8350_IRQ_CHG_VBATT_LT_3P1: + return wm8350_clear_bits(wm8350, WM8350_INT_STATUS_1_MASK, + WM8350_IM_CHG_VBATT_LT_3P1_EINT); + case WM8350_IRQ_CHG_VBATT_LT_2P85: + return wm8350_clear_bits(wm8350, WM8350_INT_STATUS_1_MASK, + WM8350_IM_CHG_VBATT_LT_2P85_EINT); + case WM8350_IRQ_CS1: + return wm8350_clear_bits(wm8350, WM8350_INT_STATUS_2_MASK, + WM8350_IM_CS1_EINT); + case WM8350_IRQ_CS2: + return wm8350_clear_bits(wm8350, WM8350_INT_STATUS_2_MASK, + WM8350_IM_CS2_EINT); + case WM8350_IRQ_USB_LIMIT: + return wm8350_clear_bits(wm8350, WM8350_INT_STATUS_2_MASK, + WM8350_IM_USB_LIMIT_EINT); + case WM8350_IRQ_AUXADC_DATARDY: + return wm8350_clear_bits(wm8350, WM8350_INT_STATUS_2_MASK, + WM8350_IM_AUXADC_DATARDY_EINT); + case WM8350_IRQ_AUXADC_DCOMP4: + return wm8350_clear_bits(wm8350, WM8350_INT_STATUS_2_MASK, + WM8350_IM_AUXADC_DCOMP4_EINT); + case WM8350_IRQ_AUXADC_DCOMP3: + return wm8350_clear_bits(wm8350, WM8350_INT_STATUS_2_MASK, + WM8350_IM_AUXADC_DCOMP3_EINT); + case WM8350_IRQ_AUXADC_DCOMP2: + return wm8350_clear_bits(wm8350, WM8350_INT_STATUS_2_MASK, + WM8350_IM_AUXADC_DCOMP2_EINT); + case WM8350_IRQ_AUXADC_DCOMP1: + return wm8350_clear_bits(wm8350, WM8350_INT_STATUS_2_MASK, + WM8350_IM_AUXADC_DCOMP1_EINT); + case WM8350_IRQ_SYS_HYST_COMP_FAIL: + return wm8350_clear_bits(wm8350, WM8350_INT_STATUS_2_MASK, + WM8350_IM_SYS_HYST_COMP_FAIL_EINT); + case WM8350_IRQ_SYS_CHIP_GT115: + return wm8350_clear_bits(wm8350, WM8350_INT_STATUS_2_MASK, + WM8350_IM_SYS_CHIP_GT115_EINT); + case WM8350_IRQ_SYS_CHIP_GT140: + return wm8350_clear_bits(wm8350, WM8350_INT_STATUS_2_MASK, + WM8350_IM_SYS_CHIP_GT140_EINT); + case WM8350_IRQ_SYS_WDOG_TO: + return wm8350_clear_bits(wm8350, WM8350_INT_STATUS_2_MASK, + WM8350_IM_SYS_WDOG_TO_EINT); + case WM8350_IRQ_UV_LDO4: + return wm8350_clear_bits(wm8350, + WM8350_UNDER_VOLTAGE_INT_STATUS_MASK, + WM8350_IM_UV_LDO4_EINT); + case WM8350_IRQ_UV_LDO3: + return wm8350_clear_bits(wm8350, + WM8350_UNDER_VOLTAGE_INT_STATUS_MASK, + WM8350_IM_UV_LDO3_EINT); + case WM8350_IRQ_UV_LDO2: + return wm8350_clear_bits(wm8350, + WM8350_UNDER_VOLTAGE_INT_STATUS_MASK, + WM8350_IM_UV_LDO2_EINT); + case WM8350_IRQ_UV_LDO1: + return wm8350_clear_bits(wm8350, + WM8350_UNDER_VOLTAGE_INT_STATUS_MASK, + WM8350_IM_UV_LDO1_EINT); + case WM8350_IRQ_UV_DC6: + return wm8350_clear_bits(wm8350, + WM8350_UNDER_VOLTAGE_INT_STATUS_MASK, + WM8350_IM_UV_DC6_EINT); + case WM8350_IRQ_UV_DC5: + return wm8350_clear_bits(wm8350, + WM8350_UNDER_VOLTAGE_INT_STATUS_MASK, + WM8350_IM_UV_DC5_EINT); + case WM8350_IRQ_UV_DC4: + return wm8350_clear_bits(wm8350, + WM8350_UNDER_VOLTAGE_INT_STATUS_MASK, + WM8350_IM_UV_DC4_EINT); + case WM8350_IRQ_UV_DC3: + return wm8350_clear_bits(wm8350, + WM8350_UNDER_VOLTAGE_INT_STATUS_MASK, + WM8350_IM_UV_DC3_EINT); + case WM8350_IRQ_UV_DC2: + return wm8350_clear_bits(wm8350, + WM8350_UNDER_VOLTAGE_INT_STATUS_MASK, + WM8350_IM_UV_DC2_EINT); + case WM8350_IRQ_UV_DC1: + return wm8350_clear_bits(wm8350, + WM8350_UNDER_VOLTAGE_INT_STATUS_MASK, + WM8350_IM_UV_DC1_EINT); + case WM8350_IRQ_OC_LS: + return wm8350_clear_bits(wm8350, + WM8350_OVER_CURRENT_INT_STATUS_MASK, + WM8350_IM_OC_LS_EINT); + case WM8350_IRQ_EXT_USB_FB: + return wm8350_clear_bits(wm8350, + WM8350_COMPARATOR_INT_STATUS_MASK, + WM8350_IM_EXT_USB_FB_EINT); + case WM8350_IRQ_EXT_WALL_FB: + return wm8350_clear_bits(wm8350, + WM8350_COMPARATOR_INT_STATUS_MASK, + WM8350_IM_EXT_WALL_FB_EINT); + case WM8350_IRQ_EXT_BAT_FB: + return wm8350_clear_bits(wm8350, + WM8350_COMPARATOR_INT_STATUS_MASK, + WM8350_IM_EXT_BAT_FB_EINT); + case WM8350_IRQ_CODEC_JCK_DET_L: + return wm8350_clear_bits(wm8350, + WM8350_COMPARATOR_INT_STATUS_MASK, + WM8350_IM_CODEC_JCK_DET_L_EINT); + case WM8350_IRQ_CODEC_JCK_DET_R: + return wm8350_clear_bits(wm8350, + WM8350_COMPARATOR_INT_STATUS_MASK, + WM8350_IM_CODEC_JCK_DET_R_EINT); + case WM8350_IRQ_CODEC_MICSCD: + return wm8350_clear_bits(wm8350, + WM8350_COMPARATOR_INT_STATUS_MASK, + WM8350_IM_CODEC_MICSCD_EINT); + case WM8350_IRQ_CODEC_MICD: + return wm8350_clear_bits(wm8350, + WM8350_COMPARATOR_INT_STATUS_MASK, + WM8350_IM_CODEC_MICD_EINT); + case WM8350_IRQ_WKUP_OFF_STATE: + return wm8350_clear_bits(wm8350, + WM8350_COMPARATOR_INT_STATUS_MASK, + WM8350_IM_WKUP_OFF_STATE_EINT); + case WM8350_IRQ_WKUP_HIB_STATE: + return wm8350_clear_bits(wm8350, + WM8350_COMPARATOR_INT_STATUS_MASK, + WM8350_IM_WKUP_HIB_STATE_EINT); + case WM8350_IRQ_WKUP_CONV_FAULT: + return wm8350_clear_bits(wm8350, + WM8350_COMPARATOR_INT_STATUS_MASK, + WM8350_IM_WKUP_CONV_FAULT_EINT); + case WM8350_IRQ_WKUP_WDOG_RST: + return wm8350_clear_bits(wm8350, + WM8350_COMPARATOR_INT_STATUS_MASK, + WM8350_IM_WKUP_OFF_STATE_EINT); + case WM8350_IRQ_WKUP_GP_PWR_ON: + return wm8350_clear_bits(wm8350, + WM8350_COMPARATOR_INT_STATUS_MASK, + WM8350_IM_WKUP_GP_PWR_ON_EINT); + case WM8350_IRQ_WKUP_ONKEY: + return wm8350_clear_bits(wm8350, + WM8350_COMPARATOR_INT_STATUS_MASK, + WM8350_IM_WKUP_ONKEY_EINT); + case WM8350_IRQ_WKUP_GP_WAKEUP: + return wm8350_clear_bits(wm8350, + WM8350_COMPARATOR_INT_STATUS_MASK, + WM8350_IM_WKUP_GP_WAKEUP_EINT); + case WM8350_IRQ_GPIO(0): + return wm8350_clear_bits(wm8350, + WM8350_GPIO_INT_STATUS_MASK, + WM8350_IM_GP0_EINT); + case WM8350_IRQ_GPIO(1): + return wm8350_clear_bits(wm8350, + WM8350_GPIO_INT_STATUS_MASK, + WM8350_IM_GP1_EINT); + case WM8350_IRQ_GPIO(2): + return wm8350_clear_bits(wm8350, + WM8350_GPIO_INT_STATUS_MASK, + WM8350_IM_GP2_EINT); + case WM8350_IRQ_GPIO(3): + return wm8350_clear_bits(wm8350, + WM8350_GPIO_INT_STATUS_MASK, + WM8350_IM_GP3_EINT); + case WM8350_IRQ_GPIO(4): + return wm8350_clear_bits(wm8350, + WM8350_GPIO_INT_STATUS_MASK, + WM8350_IM_GP4_EINT); + case WM8350_IRQ_GPIO(5): + return wm8350_clear_bits(wm8350, + WM8350_GPIO_INT_STATUS_MASK, + WM8350_IM_GP5_EINT); + case WM8350_IRQ_GPIO(6): + return wm8350_clear_bits(wm8350, + WM8350_GPIO_INT_STATUS_MASK, + WM8350_IM_GP6_EINT); + case WM8350_IRQ_GPIO(7): + return wm8350_clear_bits(wm8350, + WM8350_GPIO_INT_STATUS_MASK, + WM8350_IM_GP7_EINT); + case WM8350_IRQ_GPIO(8): + return wm8350_clear_bits(wm8350, + WM8350_GPIO_INT_STATUS_MASK, + WM8350_IM_GP8_EINT); + case WM8350_IRQ_GPIO(9): + return wm8350_clear_bits(wm8350, + WM8350_GPIO_INT_STATUS_MASK, + WM8350_IM_GP9_EINT); + case WM8350_IRQ_GPIO(10): + return wm8350_clear_bits(wm8350, + WM8350_GPIO_INT_STATUS_MASK, + WM8350_IM_GP10_EINT); + case WM8350_IRQ_GPIO(11): + return wm8350_clear_bits(wm8350, + WM8350_GPIO_INT_STATUS_MASK, + WM8350_IM_GP11_EINT); + case WM8350_IRQ_GPIO(12): + return wm8350_clear_bits(wm8350, + WM8350_GPIO_INT_STATUS_MASK, + WM8350_IM_GP12_EINT); + default: + dev_warn(wm8350->dev, "Attempting to unmask unknown IRQ %d\n", + irq); + return -EINVAL; + } + return 0; +} +EXPORT_SYMBOL_GPL(wm8350_unmask_irq); + +/* + * Cache is always host endian. + */ +static int wm8350_create_cache(struct wm8350 *wm8350, int mode) +{ + int i, ret = 0; + u16 value; + const u16 *reg_map; + + switch (mode) { +#ifdef CONFIG_MFD_WM8350_CONFIG_MODE_0 + case 0: + reg_map = wm8350_mode0_defaults; + break; +#endif +#ifdef CONFIG_MFD_WM8350_CONFIG_MODE_1 + case 1: + reg_map = wm8350_mode1_defaults; + break; +#endif +#ifdef CONFIG_MFD_WM8350_CONFIG_MODE_2 + case 2: + reg_map = wm8350_mode2_defaults; + break; +#endif +#ifdef CONFIG_MFD_WM8350_CONFIG_MODE_3 + case 3: + reg_map = wm8350_mode3_defaults; + break; +#endif + default: + dev_err(wm8350->dev, "Configuration mode %d not supported\n", + mode); + return -EINVAL; + } + + wm8350->reg_cache = + kzalloc(sizeof(u16) * (WM8350_MAX_REGISTER + 1), GFP_KERNEL); + if (wm8350->reg_cache == NULL) + return -ENOMEM; + + /* Read the initial cache state back from the device - this is + * a PMIC so the device many not be in a virgin state and we + * can't rely on the silicon values. + */ + for (i = 0; i < WM8350_MAX_REGISTER; i++) { + /* audio register range */ + if (wm8350_reg_io_map[i].readable && + (i < WM8350_CLOCK_CONTROL_1 || i > WM8350_AIF_TEST)) { + ret = wm8350->read_dev(wm8350, i, 2, (char *)&value); + if (ret < 0) { + dev_err(wm8350->dev, + "failed to read initial cache value\n"); + goto out; + } + value = be16_to_cpu(value); + value &= wm8350_reg_io_map[i].readable; + wm8350->reg_cache[i] = value; + } else + wm8350->reg_cache[i] = reg_map[i]; + } + +out: + return ret; +} +EXPORT_SYMBOL_GPL(wm8350_create_cache); + +/* + * Register a client device. This is non-fatal since there is no need to + * fail the entire device init due to a single platform device failing. + */ +static void wm8350_client_dev_register(struct wm8350 *wm8350, + const char *name, + struct platform_device **pdev) +{ + int ret; + + *pdev = platform_device_alloc(name, -1); + if (pdev == NULL) { + dev_err(wm8350->dev, "Failed to allocate %s\n", name); + return; + } + + (*pdev)->dev.parent = wm8350->dev; + platform_set_drvdata(*pdev, wm8350); + ret = platform_device_add(*pdev); + if (ret != 0) { + dev_err(wm8350->dev, "Failed to register %s: %d\n", name, ret); + platform_device_put(*pdev); + *pdev = NULL; + } +} + +int wm8350_device_init(struct wm8350 *wm8350, int irq, + struct wm8350_platform_data *pdata) +{ + int ret = -EINVAL; + u16 id1, id2, mask, mode; + + /* get WM8350 revision and config mode */ + wm8350->read_dev(wm8350, WM8350_RESET_ID, sizeof(id1), &id1); + wm8350->read_dev(wm8350, WM8350_ID, sizeof(id2), &id2); + + id1 = be16_to_cpu(id1); + id2 = be16_to_cpu(id2); + + if (id1 == 0x6143) { + switch ((id2 & WM8350_CHIP_REV_MASK) >> 12) { + case WM8350_REV_E: + dev_info(wm8350->dev, "Found Rev E device\n"); + wm8350->rev = WM8350_REV_E; + break; + case WM8350_REV_F: + dev_info(wm8350->dev, "Found Rev F device\n"); + wm8350->rev = WM8350_REV_F; + break; + case WM8350_REV_G: + dev_info(wm8350->dev, "Found Rev G device\n"); + wm8350->rev = WM8350_REV_G; + break; + default: + /* For safety we refuse to run on unknown hardware */ + dev_info(wm8350->dev, "Found unknown rev\n"); + ret = -ENODEV; + goto err; + } + } else { + dev_info(wm8350->dev, "Device with ID %x is not a WM8350\n", + id1); + ret = -ENODEV; + goto err; + } + + mode = id2 & WM8350_CONF_STS_MASK >> 10; + mask = id2 & WM8350_CUST_ID_MASK; + dev_info(wm8350->dev, "Config mode %d, ROM mask %d\n", mode, mask); + + ret = wm8350_create_cache(wm8350, mode); + if (ret < 0) { + printk(KERN_ERR "wm8350: failed to create register cache\n"); + return ret; + } + + if (pdata->init) { + ret = pdata->init(wm8350); + if (ret != 0) { + dev_err(wm8350->dev, "Platform init() failed: %d\n", + ret); + goto err; + } + } + + mutex_init(&wm8350->irq_mutex); + INIT_WORK(&wm8350->irq_work, wm8350_irq_worker); + if (irq != NO_IRQ) { + ret = request_irq(irq, wm8350_irq, 0, + "wm8350", wm8350); + if (ret != 0) { + dev_err(wm8350->dev, "Failed to request IRQ: %d\n", + ret); + goto err; + } + } else { + dev_err(wm8350->dev, "No IRQ configured\n"); + goto err; + } + wm8350->chip_irq = irq; + + wm8350_reg_write(wm8350, WM8350_SYSTEM_INTERRUPTS_MASK, 0x0); + + wm8350_client_dev_register(wm8350, "wm8350-codec", + &(wm8350->codec.pdev)); + wm8350_client_dev_register(wm8350, "wm8350-gpio", + &(wm8350->gpio.pdev)); + wm8350_client_dev_register(wm8350, "wm8350-power", + &(wm8350->power.pdev)); + wm8350_client_dev_register(wm8350, "wm8350-rtc", &(wm8350->rtc.pdev)); + wm8350_client_dev_register(wm8350, "wm8350-wdt", &(wm8350->wdt.pdev)); + + return 0; + +err: + kfree(wm8350->reg_cache); + return ret; +} +EXPORT_SYMBOL_GPL(wm8350_device_init); + +void wm8350_device_exit(struct wm8350 *wm8350) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(wm8350->pmic.pdev); i++) + platform_device_unregister(wm8350->pmic.pdev[i]); + + platform_device_unregister(wm8350->wdt.pdev); + platform_device_unregister(wm8350->rtc.pdev); + platform_device_unregister(wm8350->power.pdev); + platform_device_unregister(wm8350->gpio.pdev); + platform_device_unregister(wm8350->codec.pdev); + + free_irq(wm8350->chip_irq, wm8350); + flush_work(&wm8350->irq_work); + kfree(wm8350->reg_cache); +} +EXPORT_SYMBOL_GPL(wm8350_device_exit); + +MODULE_DESCRIPTION("WM8350 AudioPlus PMIC core driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/mfd/wm8350-gpio.c b/drivers/mfd/wm8350-gpio.c new file mode 100644 index 00000000000..ebf99bef392 --- /dev/null +++ b/drivers/mfd/wm8350-gpio.c @@ -0,0 +1,222 @@ +/* + * wm8350-core.c -- Device access for Wolfson WM8350 + * + * Copyright 2007, 2008 Wolfson Microelectronics PLC. + * + * Author: Liam Girdwood + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/errno.h> + +#include <linux/mfd/wm8350/core.h> +#include <linux/mfd/wm8350/gpio.h> +#include <linux/mfd/wm8350/pmic.h> + +static int gpio_set_dir(struct wm8350 *wm8350, int gpio, int dir) +{ + int ret; + + wm8350_reg_unlock(wm8350); + if (dir == WM8350_GPIO_DIR_OUT) + ret = wm8350_clear_bits(wm8350, + WM8350_GPIO_CONFIGURATION_I_O, + 1 << gpio); + else + ret = wm8350_set_bits(wm8350, + WM8350_GPIO_CONFIGURATION_I_O, + 1 << gpio); + wm8350_reg_lock(wm8350); + return ret; +} + +static int gpio_set_debounce(struct wm8350 *wm8350, int gpio, int db) +{ + if (db == WM8350_GPIO_DEBOUNCE_ON) + return wm8350_set_bits(wm8350, WM8350_GPIO_DEBOUNCE, + 1 << gpio); + else + return wm8350_clear_bits(wm8350, + WM8350_GPIO_DEBOUNCE, 1 << gpio); +} + +static int gpio_set_func(struct wm8350 *wm8350, int gpio, int func) +{ + u16 reg; + + wm8350_reg_unlock(wm8350); + switch (gpio) { + case 0: + reg = wm8350_reg_read(wm8350, WM8350_GPIO_FUNCTION_SELECT_1) + & ~WM8350_GP0_FN_MASK; + wm8350_reg_write(wm8350, WM8350_GPIO_FUNCTION_SELECT_1, + reg | ((func & 0xf) << 0)); + break; + case 1: + reg = wm8350_reg_read(wm8350, WM8350_GPIO_FUNCTION_SELECT_1) + & ~WM8350_GP1_FN_MASK; + wm8350_reg_write(wm8350, WM8350_GPIO_FUNCTION_SELECT_1, + reg | ((func & 0xf) << 4)); + break; + case 2: + reg = wm8350_reg_read(wm8350, WM8350_GPIO_FUNCTION_SELECT_1) + & ~WM8350_GP2_FN_MASK; + wm8350_reg_write(wm8350, WM8350_GPIO_FUNCTION_SELECT_1, + reg | ((func & 0xf) << 8)); + break; + case 3: + reg = wm8350_reg_read(wm8350, WM8350_GPIO_FUNCTION_SELECT_1) + & ~WM8350_GP3_FN_MASK; + wm8350_reg_write(wm8350, WM8350_GPIO_FUNCTION_SELECT_1, + reg | ((func & 0xf) << 12)); + break; + case 4: + reg = wm8350_reg_read(wm8350, WM8350_GPIO_FUNCTION_SELECT_2) + & ~WM8350_GP4_FN_MASK; + wm8350_reg_write(wm8350, WM8350_GPIO_FUNCTION_SELECT_2, + reg | ((func & 0xf) << 0)); + break; + case 5: + reg = wm8350_reg_read(wm8350, WM8350_GPIO_FUNCTION_SELECT_2) + & ~WM8350_GP5_FN_MASK; + wm8350_reg_write(wm8350, WM8350_GPIO_FUNCTION_SELECT_2, + reg | ((func & 0xf) << 4)); + break; + case 6: + reg = wm8350_reg_read(wm8350, WM8350_GPIO_FUNCTION_SELECT_2) + & ~WM8350_GP6_FN_MASK; + wm8350_reg_write(wm8350, WM8350_GPIO_FUNCTION_SELECT_2, + reg | ((func & 0xf) << 8)); + break; + case 7: + reg = wm8350_reg_read(wm8350, WM8350_GPIO_FUNCTION_SELECT_2) + & ~WM8350_GP7_FN_MASK; + wm8350_reg_write(wm8350, WM8350_GPIO_FUNCTION_SELECT_2, + reg | ((func & 0xf) << 12)); + break; + case 8: + reg = wm8350_reg_read(wm8350, WM8350_GPIO_FUNCTION_SELECT_3) + & ~WM8350_GP8_FN_MASK; + wm8350_reg_write(wm8350, WM8350_GPIO_FUNCTION_SELECT_3, + reg | ((func & 0xf) << 0)); + break; + case 9: + reg = wm8350_reg_read(wm8350, WM8350_GPIO_FUNCTION_SELECT_3) + & ~WM8350_GP9_FN_MASK; + wm8350_reg_write(wm8350, WM8350_GPIO_FUNCTION_SELECT_3, + reg | ((func & 0xf) << 4)); + break; + case 10: + reg = wm8350_reg_read(wm8350, WM8350_GPIO_FUNCTION_SELECT_3) + & ~WM8350_GP10_FN_MASK; + wm8350_reg_write(wm8350, WM8350_GPIO_FUNCTION_SELECT_3, + reg | ((func & 0xf) << 8)); + break; + case 11: + reg = wm8350_reg_read(wm8350, WM8350_GPIO_FUNCTION_SELECT_3) + & ~WM8350_GP11_FN_MASK; + wm8350_reg_write(wm8350, WM8350_GPIO_FUNCTION_SELECT_3, + reg | ((func & 0xf) << 12)); + break; + case 12: + reg = wm8350_reg_read(wm8350, WM8350_GPIO_FUNCTION_SELECT_4) + & ~WM8350_GP12_FN_MASK; + wm8350_reg_write(wm8350, WM8350_GPIO_FUNCTION_SELECT_4, + reg | ((func & 0xf) << 0)); + break; + default: + wm8350_reg_lock(wm8350); + return -EINVAL; + } + + wm8350_reg_lock(wm8350); + return 0; +} + +static int gpio_set_pull_up(struct wm8350 *wm8350, int gpio, int up) +{ + if (up) + return wm8350_set_bits(wm8350, + WM8350_GPIO_PIN_PULL_UP_CONTROL, + 1 << gpio); + else + return wm8350_clear_bits(wm8350, + WM8350_GPIO_PIN_PULL_UP_CONTROL, + 1 << gpio); +} + +static int gpio_set_pull_down(struct wm8350 *wm8350, int gpio, int down) +{ + if (down) + return wm8350_set_bits(wm8350, + WM8350_GPIO_PULL_DOWN_CONTROL, + 1 << gpio); + else + return wm8350_clear_bits(wm8350, + WM8350_GPIO_PULL_DOWN_CONTROL, + 1 << gpio); +} + +static int gpio_set_polarity(struct wm8350 *wm8350, int gpio, int pol) +{ + if (pol == WM8350_GPIO_ACTIVE_HIGH) + return wm8350_set_bits(wm8350, + WM8350_GPIO_PIN_POLARITY_TYPE, + 1 << gpio); + else + return wm8350_clear_bits(wm8350, + WM8350_GPIO_PIN_POLARITY_TYPE, + 1 << gpio); +} + +static int gpio_set_invert(struct wm8350 *wm8350, int gpio, int invert) +{ + if (invert == WM8350_GPIO_INVERT_ON) + return wm8350_set_bits(wm8350, WM8350_GPIO_INT_MODE, 1 << gpio); + else + return wm8350_clear_bits(wm8350, + WM8350_GPIO_INT_MODE, 1 << gpio); +} + +int wm8350_gpio_config(struct wm8350 *wm8350, int gpio, int dir, int func, + int pol, int pull, int invert, int debounce) +{ + /* make sure we never pull up and down at the same time */ + if (pull == WM8350_GPIO_PULL_NONE) { + if (gpio_set_pull_up(wm8350, gpio, 0)) + goto err; + if (gpio_set_pull_down(wm8350, gpio, 0)) + goto err; + } else if (pull == WM8350_GPIO_PULL_UP) { + if (gpio_set_pull_down(wm8350, gpio, 0)) + goto err; + if (gpio_set_pull_up(wm8350, gpio, 1)) + goto err; + } else if (pull == WM8350_GPIO_PULL_DOWN) { + if (gpio_set_pull_up(wm8350, gpio, 0)) + goto err; + if (gpio_set_pull_down(wm8350, gpio, 1)) + goto err; + } + + if (gpio_set_invert(wm8350, gpio, invert)) + goto err; + if (gpio_set_polarity(wm8350, gpio, pol)) + goto err; + if (gpio_set_debounce(wm8350, gpio, debounce)) + goto err; + if (gpio_set_dir(wm8350, gpio, dir)) + goto err; + return gpio_set_func(wm8350, gpio, func); + +err: + return -EIO; +} +EXPORT_SYMBOL_GPL(wm8350_gpio_config); diff --git a/drivers/mfd/wm8350-i2c.c b/drivers/mfd/wm8350-i2c.c new file mode 100644 index 00000000000..8dfe21bb3bd --- /dev/null +++ b/drivers/mfd/wm8350-i2c.c @@ -0,0 +1,120 @@ +/* + * wm8350-i2c.c -- Generic I2C driver for Wolfson WM8350 PMIC + * + * This driver defines and configures the WM8350 for the Freescale i.MX32ADS. + * + * Copyright 2007, 2008 Wolfson Microelectronics PLC. + * + * Author: Liam Girdwood + * linux@wolfsonmicro.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/i2c.h> +#include <linux/platform_device.h> +#include <linux/mfd/wm8350/core.h> + +static int wm8350_i2c_read_device(struct wm8350 *wm8350, char reg, + int bytes, void *dest) +{ + int ret; + + ret = i2c_master_send(wm8350->i2c_client, ®, 1); + if (ret < 0) + return ret; + return i2c_master_recv(wm8350->i2c_client, dest, bytes); +} + +static int wm8350_i2c_write_device(struct wm8350 *wm8350, char reg, + int bytes, void *src) +{ + /* we add 1 byte for device register */ + u8 msg[(WM8350_MAX_REGISTER << 1) + 1]; + + if (bytes > ((WM8350_MAX_REGISTER << 1) + 1)) + return -EINVAL; + + msg[0] = reg; + memcpy(&msg[1], src, bytes); + return i2c_master_send(wm8350->i2c_client, msg, bytes + 1); +} + +static int wm8350_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct wm8350 *wm8350; + int ret = 0; + + wm8350 = kzalloc(sizeof(struct wm8350), GFP_KERNEL); + if (wm8350 == NULL) { + kfree(i2c); + return -ENOMEM; + } + + i2c_set_clientdata(i2c, wm8350); + wm8350->dev = &i2c->dev; + wm8350->i2c_client = i2c; + wm8350->read_dev = wm8350_i2c_read_device; + wm8350->write_dev = wm8350_i2c_write_device; + + ret = wm8350_device_init(wm8350, i2c->irq, i2c->dev.platform_data); + if (ret < 0) + goto err; + + return ret; + +err: + kfree(wm8350); + return ret; +} + +static int wm8350_i2c_remove(struct i2c_client *i2c) +{ + struct wm8350 *wm8350 = i2c_get_clientdata(i2c); + + wm8350_device_exit(wm8350); + kfree(wm8350); + + return 0; +} + +static const struct i2c_device_id wm8350_i2c_id[] = { + { "wm8350", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, wm8350_i2c_id); + + +static struct i2c_driver wm8350_i2c_driver = { + .driver = { + .name = "wm8350", + .owner = THIS_MODULE, + }, + .probe = wm8350_i2c_probe, + .remove = wm8350_i2c_remove, + .id_table = wm8350_i2c_id, +}; + +static int __init wm8350_i2c_init(void) +{ + return i2c_add_driver(&wm8350_i2c_driver); +} +/* init early so consumer devices can complete system boot */ +subsys_initcall(wm8350_i2c_init); + +static void __exit wm8350_i2c_exit(void) +{ + i2c_del_driver(&wm8350_i2c_driver); +} +module_exit(wm8350_i2c_exit); + +MODULE_DESCRIPTION("I2C support for the WM8350 AudioPlus PMIC"); +MODULE_LICENSE("GPL"); diff --git a/drivers/mfd/wm8350-regmap.c b/drivers/mfd/wm8350-regmap.c new file mode 100644 index 00000000000..974678db22c --- /dev/null +++ b/drivers/mfd/wm8350-regmap.c @@ -0,0 +1,1347 @@ +/* + * wm8350-regmap.c -- Wolfson Microelectronics WM8350 register map + * + * This file splits out the tables describing the defaults and access + * status of the WM8350 registers since they are rather large. + * + * Copyright 2007, 2008 Wolfson Microelectronics PLC. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/mfd/wm8350/core.h> + +#ifdef CONFIG_MFD_WM8350_CONFIG_MODE_0 + +#undef WM8350_HAVE_CONFIG_MODE +#define WM8350_HAVE_CONFIG_MODE + +const u16 wm8350_mode0_defaults[] = { + 0x17FF, /* R0 - Reset/ID */ + 0x1000, /* R1 - ID */ + 0x0000, /* R2 */ + 0x1002, /* R3 - System Control 1 */ + 0x0004, /* R4 - System Control 2 */ + 0x0000, /* R5 - System Hibernate */ + 0x8A00, /* R6 - Interface Control */ + 0x0000, /* R7 */ + 0x8000, /* R8 - Power mgmt (1) */ + 0x0000, /* R9 - Power mgmt (2) */ + 0x0000, /* R10 - Power mgmt (3) */ + 0x2000, /* R11 - Power mgmt (4) */ + 0x0E00, /* R12 - Power mgmt (5) */ + 0x0000, /* R13 - Power mgmt (6) */ + 0x0000, /* R14 - Power mgmt (7) */ + 0x0000, /* R15 */ + 0x0000, /* R16 - RTC Seconds/Minutes */ + 0x0100, /* R17 - RTC Hours/Day */ + 0x0101, /* R18 - RTC Date/Month */ + 0x1400, /* R19 - RTC Year */ + 0x0000, /* R20 - Alarm Seconds/Minutes */ + 0x0000, /* R21 - Alarm Hours/Day */ + 0x0000, /* R22 - Alarm Date/Month */ + 0x0320, /* R23 - RTC Time Control */ + 0x0000, /* R24 - System Interrupts */ + 0x0000, /* R25 - Interrupt Status 1 */ + 0x0000, /* R26 - Interrupt Status 2 */ + 0x0000, /* R27 - Power Up Interrupt Status */ + 0x0000, /* R28 - Under Voltage Interrupt status */ + 0x0000, /* R29 - Over Current Interrupt status */ + 0x0000, /* R30 - GPIO Interrupt Status */ + 0x0000, /* R31 - Comparator Interrupt Status */ + 0x3FFF, /* R32 - System Interrupts Mask */ + 0x0000, /* R33 - Interrupt Status 1 Mask */ + 0x0000, /* R34 - Interrupt Status 2 Mask */ + 0x0000, /* R35 - Power Up Interrupt Status Mask */ + 0x0000, /* R36 - Under Voltage Interrupt status Mask */ + 0x0000, /* R37 - Over Current Interrupt status Mask */ + 0x0000, /* R38 - GPIO Interrupt Status Mask */ + 0x0000, /* R39 - Comparator Interrupt Status Mask */ + 0x0040, /* R40 - Clock Control 1 */ + 0x0000, /* R41 - Clock Control 2 */ + 0x3B00, /* R42 - FLL Control 1 */ + 0x7086, /* R43 - FLL Control 2 */ + 0xC226, /* R44 - FLL Control 3 */ + 0x0000, /* R45 - FLL Control 4 */ + 0x0000, /* R46 */ + 0x0000, /* R47 */ + 0x0000, /* R48 - DAC Control */ + 0x0000, /* R49 */ + 0x00C0, /* R50 - DAC Digital Volume L */ + 0x00C0, /* R51 - DAC Digital Volume R */ + 0x0000, /* R52 */ + 0x0040, /* R53 - DAC LR Rate */ + 0x0000, /* R54 - DAC Clock Control */ + 0x0000, /* R55 */ + 0x0000, /* R56 */ + 0x0000, /* R57 */ + 0x4000, /* R58 - DAC Mute */ + 0x0000, /* R59 - DAC Mute Volume */ + 0x0000, /* R60 - DAC Side */ + 0x0000, /* R61 */ + 0x0000, /* R62 */ + 0x0000, /* R63 */ + 0x8000, /* R64 - ADC Control */ + 0x0000, /* R65 */ + 0x00C0, /* R66 - ADC Digital Volume L */ + 0x00C0, /* R67 - ADC Digital Volume R */ + 0x0000, /* R68 - ADC Divider */ + 0x0000, /* R69 */ + 0x0040, /* R70 - ADC LR Rate */ + 0x0000, /* R71 */ + 0x0303, /* R72 - Input Control */ + 0x0000, /* R73 - IN3 Input Control */ + 0x0000, /* R74 - Mic Bias Control */ + 0x0000, /* R75 */ + 0x0000, /* R76 - Output Control */ + 0x0000, /* R77 - Jack Detect */ + 0x0000, /* R78 - Anti Pop Control */ + 0x0000, /* R79 */ + 0x0040, /* R80 - Left Input Volume */ + 0x0040, /* R81 - Right Input Volume */ + 0x0000, /* R82 */ + 0x0000, /* R83 */ + 0x0000, /* R84 */ + 0x0000, /* R85 */ + 0x0000, /* R86 */ + 0x0000, /* R87 */ + 0x0800, /* R88 - Left Mixer Control */ + 0x1000, /* R89 - Right Mixer Control */ + 0x0000, /* R90 */ + 0x0000, /* R91 */ + 0x0000, /* R92 - OUT3 Mixer Control */ + 0x0000, /* R93 - OUT4 Mixer Control */ + 0x0000, /* R94 */ + 0x0000, /* R95 */ + 0x0000, /* R96 - Output Left Mixer Volume */ + 0x0000, /* R97 - Output Right Mixer Volume */ + 0x0000, /* R98 - Input Mixer Volume L */ + 0x0000, /* R99 - Input Mixer Volume R */ + 0x0000, /* R100 - Input Mixer Volume */ + 0x0000, /* R101 */ + 0x0000, /* R102 */ + 0x0000, /* R103 */ + 0x00E4, /* R104 - LOUT1 Volume */ + 0x00E4, /* R105 - ROUT1 Volume */ + 0x00E4, /* R106 - LOUT2 Volume */ + 0x02E4, /* R107 - ROUT2 Volume */ + 0x0000, /* R108 */ + 0x0000, /* R109 */ + 0x0000, /* R110 */ + 0x0000, /* R111 - BEEP Volume */ + 0x0A00, /* R112 - AI Formating */ + 0x0000, /* R113 - ADC DAC COMP */ + 0x0020, /* R114 - AI ADC Control */ + 0x0020, /* R115 - AI DAC Control */ + 0x0000, /* R116 - AIF Test */ + 0x0000, /* R117 */ + 0x0000, /* R118 */ + 0x0000, /* R119 */ + 0x0000, /* R120 */ + 0x0000, /* R121 */ + 0x0000, /* R122 */ + 0x0000, /* R123 */ + 0x0000, /* R124 */ + 0x0000, /* R125 */ + 0x0000, /* R126 */ + 0x0000, /* R127 */ + 0x1FFF, /* R128 - GPIO Debounce */ + 0x0000, /* R129 - GPIO Pin pull up Control */ + 0x03FC, /* R130 - GPIO Pull down Control */ + 0x0000, /* R131 - GPIO Interrupt Mode */ + 0x0000, /* R132 */ + 0x0000, /* R133 - GPIO Control */ + 0x0FFC, /* R134 - GPIO Configuration (i/o) */ + 0x0FFC, /* R135 - GPIO Pin Polarity / Type */ + 0x0000, /* R136 */ + 0x0000, /* R137 */ + 0x0000, /* R138 */ + 0x0000, /* R139 */ + 0x0013, /* R140 - GPIO Function Select 1 */ + 0x0000, /* R141 - GPIO Function Select 2 */ + 0x0000, /* R142 - GPIO Function Select 3 */ + 0x0003, /* R143 - GPIO Function Select 4 */ + 0x0000, /* R144 - Digitiser Control (1) */ + 0x0002, /* R145 - Digitiser Control (2) */ + 0x0000, /* R146 */ + 0x0000, /* R147 */ + 0x0000, /* R148 */ + 0x0000, /* R149 */ + 0x0000, /* R150 */ + 0x0000, /* R151 */ + 0x7000, /* R152 - AUX1 Readback */ + 0x7000, /* R153 - AUX2 Readback */ + 0x7000, /* R154 - AUX3 Readback */ + 0x7000, /* R155 - AUX4 Readback */ + 0x0000, /* R156 - USB Voltage Readback */ + 0x0000, /* R157 - LINE Voltage Readback */ + 0x0000, /* R158 - BATT Voltage Readback */ + 0x0000, /* R159 - Chip Temp Readback */ + 0x0000, /* R160 */ + 0x0000, /* R161 */ + 0x0000, /* R162 */ + 0x0000, /* R163 - Generic Comparator Control */ + 0x0000, /* R164 - Generic comparator 1 */ + 0x0000, /* R165 - Generic comparator 2 */ + 0x0000, /* R166 - Generic comparator 3 */ + 0x0000, /* R167 - Generic comparator 4 */ + 0xA00F, /* R168 - Battery Charger Control 1 */ + 0x0B06, /* R169 - Battery Charger Control 2 */ + 0x0000, /* R170 - Battery Charger Control 3 */ + 0x0000, /* R171 */ + 0x0000, /* R172 - Current Sink Driver A */ + 0x0000, /* R173 - CSA Flash control */ + 0x0000, /* R174 - Current Sink Driver B */ + 0x0000, /* R175 - CSB Flash control */ + 0x0000, /* R176 - DCDC/LDO requested */ + 0x002D, /* R177 - DCDC Active options */ + 0x0000, /* R178 - DCDC Sleep options */ + 0x0025, /* R179 - Power-check comparator */ + 0x000E, /* R180 - DCDC1 Control */ + 0x0000, /* R181 - DCDC1 Timeouts */ + 0x1006, /* R182 - DCDC1 Low Power */ + 0x0018, /* R183 - DCDC2 Control */ + 0x0000, /* R184 - DCDC2 Timeouts */ + 0x0000, /* R185 */ + 0x0000, /* R186 - DCDC3 Control */ + 0x0000, /* R187 - DCDC3 Timeouts */ + 0x0006, /* R188 - DCDC3 Low Power */ + 0x0000, /* R189 - DCDC4 Control */ + 0x0000, /* R190 - DCDC4 Timeouts */ + 0x0006, /* R191 - DCDC4 Low Power */ + 0x0008, /* R192 - DCDC5 Control */ + 0x0000, /* R193 - DCDC5 Timeouts */ + 0x0000, /* R194 */ + 0x0000, /* R195 - DCDC6 Control */ + 0x0000, /* R196 - DCDC6 Timeouts */ + 0x0006, /* R197 - DCDC6 Low Power */ + 0x0000, /* R198 */ + 0x0003, /* R199 - Limit Switch Control */ + 0x001C, /* R200 - LDO1 Control */ + 0x0000, /* R201 - LDO1 Timeouts */ + 0x001C, /* R202 - LDO1 Low Power */ + 0x001B, /* R203 - LDO2 Control */ + 0x0000, /* R204 - LDO2 Timeouts */ + 0x001C, /* R205 - LDO2 Low Power */ + 0x001B, /* R206 - LDO3 Control */ + 0x0000, /* R207 - LDO3 Timeouts */ + 0x001C, /* R208 - LDO3 Low Power */ + 0x001B, /* R209 - LDO4 Control */ + 0x0000, /* R210 - LDO4 Timeouts */ + 0x001C, /* R211 - LDO4 Low Power */ + 0x0000, /* R212 */ + 0x0000, /* R213 */ + 0x0000, /* R214 */ + 0x0000, /* R215 - VCC_FAULT Masks */ + 0x001F, /* R216 - Main Bandgap Control */ + 0x0000, /* R217 - OSC Control */ + 0x9000, /* R218 - RTC Tick Control */ + 0x0000, /* R219 */ + 0x4000, /* R220 - RAM BIST 1 */ + 0x0000, /* R221 */ + 0x0000, /* R222 */ + 0x0000, /* R223 */ + 0x0000, /* R224 */ + 0x0000, /* R225 - DCDC/LDO status */ + 0x0000, /* R226 */ + 0x0000, /* R227 */ + 0x0000, /* R228 */ + 0x0000, /* R229 */ + 0xE000, /* R230 - GPIO Pin Status */ + 0x0000, /* R231 */ + 0x0000, /* R232 */ + 0x0000, /* R233 */ + 0x0000, /* R234 */ + 0x0000, /* R235 */ + 0x0000, /* R236 */ + 0x0000, /* R237 */ + 0x0000, /* R238 */ + 0x0000, /* R239 */ + 0x0000, /* R240 */ + 0x0000, /* R241 */ + 0x0000, /* R242 */ + 0x0000, /* R243 */ + 0x0000, /* R244 */ + 0x0000, /* R245 */ + 0x0000, /* R246 */ + 0x0000, /* R247 */ + 0x0000, /* R248 */ + 0x0000, /* R249 */ + 0x0000, /* R250 */ + 0x0000, /* R251 */ + 0x0000, /* R252 */ + 0x0000, /* R253 */ + 0x0000, /* R254 */ + 0x0000, /* R255 */ +}; +#endif + +#ifdef CONFIG_MFD_WM8350_CONFIG_MODE_1 + +#undef WM8350_HAVE_CONFIG_MODE +#define WM8350_HAVE_CONFIG_MODE + +const u16 wm8350_mode1_defaults[] = { + 0x17FF, /* R0 - Reset/ID */ + 0x1000, /* R1 - ID */ + 0x0000, /* R2 */ + 0x1002, /* R3 - System Control 1 */ + 0x0014, /* R4 - System Control 2 */ + 0x0000, /* R5 - System Hibernate */ + 0x8A00, /* R6 - Interface Control */ + 0x0000, /* R7 */ + 0x8000, /* R8 - Power mgmt (1) */ + 0x0000, /* R9 - Power mgmt (2) */ + 0x0000, /* R10 - Power mgmt (3) */ + 0x2000, /* R11 - Power mgmt (4) */ + 0x0E00, /* R12 - Power mgmt (5) */ + 0x0000, /* R13 - Power mgmt (6) */ + 0x0000, /* R14 - Power mgmt (7) */ + 0x0000, /* R15 */ + 0x0000, /* R16 - RTC Seconds/Minutes */ + 0x0100, /* R17 - RTC Hours/Day */ + 0x0101, /* R18 - RTC Date/Month */ + 0x1400, /* R19 - RTC Year */ + 0x0000, /* R20 - Alarm Seconds/Minutes */ + 0x0000, /* R21 - Alarm Hours/Day */ + 0x0000, /* R22 - Alarm Date/Month */ + 0x0320, /* R23 - RTC Time Control */ + 0x0000, /* R24 - System Interrupts */ + 0x0000, /* R25 - Interrupt Status 1 */ + 0x0000, /* R26 - Interrupt Status 2 */ + 0x0000, /* R27 - Power Up Interrupt Status */ + 0x0000, /* R28 - Under Voltage Interrupt status */ + 0x0000, /* R29 - Over Current Interrupt status */ + 0x0000, /* R30 - GPIO Interrupt Status */ + 0x0000, /* R31 - Comparator Interrupt Status */ + 0x3FFF, /* R32 - System Interrupts Mask */ + 0x0000, /* R33 - Interrupt Status 1 Mask */ + 0x0000, /* R34 - Interrupt Status 2 Mask */ + 0x0000, /* R35 - Power Up Interrupt Status Mask */ + 0x0000, /* R36 - Under Voltage Interrupt status Mask */ + 0x0000, /* R37 - Over Current Interrupt status Mask */ + 0x0000, /* R38 - GPIO Interrupt Status Mask */ + 0x0000, /* R39 - Comparator Interrupt Status Mask */ + 0x0040, /* R40 - Clock Control 1 */ + 0x0000, /* R41 - Clock Control 2 */ + 0x3B00, /* R42 - FLL Control 1 */ + 0x7086, /* R43 - FLL Control 2 */ + 0xC226, /* R44 - FLL Control 3 */ + 0x0000, /* R45 - FLL Control 4 */ + 0x0000, /* R46 */ + 0x0000, /* R47 */ + 0x0000, /* R48 - DAC Control */ + 0x0000, /* R49 */ + 0x00C0, /* R50 - DAC Digital Volume L */ + 0x00C0, /* R51 - DAC Digital Volume R */ + 0x0000, /* R52 */ + 0x0040, /* R53 - DAC LR Rate */ + 0x0000, /* R54 - DAC Clock Control */ + 0x0000, /* R55 */ + 0x0000, /* R56 */ + 0x0000, /* R57 */ + 0x4000, /* R58 - DAC Mute */ + 0x0000, /* R59 - DAC Mute Volume */ + 0x0000, /* R60 - DAC Side */ + 0x0000, /* R61 */ + 0x0000, /* R62 */ + 0x0000, /* R63 */ + 0x8000, /* R64 - ADC Control */ + 0x0000, /* R65 */ + 0x00C0, /* R66 - ADC Digital Volume L */ + 0x00C0, /* R67 - ADC Digital Volume R */ + 0x0000, /* R68 - ADC Divider */ + 0x0000, /* R69 */ + 0x0040, /* R70 - ADC LR Rate */ + 0x0000, /* R71 */ + 0x0303, /* R72 - Input Control */ + 0x0000, /* R73 - IN3 Input Control */ + 0x0000, /* R74 - Mic Bias Control */ + 0x0000, /* R75 */ + 0x0000, /* R76 - Output Control */ + 0x0000, /* R77 - Jack Detect */ + 0x0000, /* R78 - Anti Pop Control */ + 0x0000, /* R79 */ + 0x0040, /* R80 - Left Input Volume */ + 0x0040, /* R81 - Right Input Volume */ + 0x0000, /* R82 */ + 0x0000, /* R83 */ + 0x0000, /* R84 */ + 0x0000, /* R85 */ + 0x0000, /* R86 */ + 0x0000, /* R87 */ + 0x0800, /* R88 - Left Mixer Control */ + 0x1000, /* R89 - Right Mixer Control */ + 0x0000, /* R90 */ + 0x0000, /* R91 */ + 0x0000, /* R92 - OUT3 Mixer Control */ + 0x0000, /* R93 - OUT4 Mixer Control */ + 0x0000, /* R94 */ + 0x0000, /* R95 */ + 0x0000, /* R96 - Output Left Mixer Volume */ + 0x0000, /* R97 - Output Right Mixer Volume */ + 0x0000, /* R98 - Input Mixer Volume L */ + 0x0000, /* R99 - Input Mixer Volume R */ + 0x0000, /* R100 - Input Mixer Volume */ + 0x0000, /* R101 */ + 0x0000, /* R102 */ + 0x0000, /* R103 */ + 0x00E4, /* R104 - LOUT1 Volume */ + 0x00E4, /* R105 - ROUT1 Volume */ + 0x00E4, /* R106 - LOUT2 Volume */ + 0x02E4, /* R107 - ROUT2 Volume */ + 0x0000, /* R108 */ + 0x0000, /* R109 */ + 0x0000, /* R110 */ + 0x0000, /* R111 - BEEP Volume */ + 0x0A00, /* R112 - AI Formating */ + 0x0000, /* R113 - ADC DAC COMP */ + 0x0020, /* R114 - AI ADC Control */ + 0x0020, /* R115 - AI DAC Control */ + 0x0000, /* R116 - AIF Test */ + 0x0000, /* R117 */ + 0x0000, /* R118 */ + 0x0000, /* R119 */ + 0x0000, /* R120 */ + 0x0000, /* R121 */ + 0x0000, /* R122 */ + 0x0000, /* R123 */ + 0x0000, /* R124 */ + 0x0000, /* R125 */ + 0x0000, /* R126 */ + 0x0000, /* R127 */ + 0x1FFF, /* R128 - GPIO Debounce */ + 0x0000, /* R129 - GPIO Pin pull up Control */ + 0x03FC, /* R130 - GPIO Pull down Control */ + 0x0000, /* R131 - GPIO Interrupt Mode */ + 0x0000, /* R132 */ + 0x0000, /* R133 - GPIO Control */ + 0x00FB, /* R134 - GPIO Configuration (i/o) */ + 0x04FE, /* R135 - GPIO Pin Polarity / Type */ + 0x0000, /* R136 */ + 0x0000, /* R137 */ + 0x0000, /* R138 */ + 0x0000, /* R139 */ + 0x0312, /* R140 - GPIO Function Select 1 */ + 0x1003, /* R141 - GPIO Function Select 2 */ + 0x1331, /* R142 - GPIO Function Select 3 */ + 0x0003, /* R143 - GPIO Function Select 4 */ + 0x0000, /* R144 - Digitiser Control (1) */ + 0x0002, /* R145 - Digitiser Control (2) */ + 0x0000, /* R146 */ + 0x0000, /* R147 */ + 0x0000, /* R148 */ + 0x0000, /* R149 */ + 0x0000, /* R150 */ + 0x0000, /* R151 */ + 0x7000, /* R152 - AUX1 Readback */ + 0x7000, /* R153 - AUX2 Readback */ + 0x7000, /* R154 - AUX3 Readback */ + 0x7000, /* R155 - AUX4 Readback */ + 0x0000, /* R156 - USB Voltage Readback */ + 0x0000, /* R157 - LINE Voltage Readback */ + 0x0000, /* R158 - BATT Voltage Readback */ + 0x0000, /* R159 - Chip Temp Readback */ + 0x0000, /* R160 */ + 0x0000, /* R161 */ + 0x0000, /* R162 */ + 0x0000, /* R163 - Generic Comparator Control */ + 0x0000, /* R164 - Generic comparator 1 */ + 0x0000, /* R165 - Generic comparator 2 */ + 0x0000, /* R166 - Generic comparator 3 */ + 0x0000, /* R167 - Generic comparator 4 */ + 0xA00F, /* R168 - Battery Charger Control 1 */ + 0x0B06, /* R169 - Battery Charger Control 2 */ + 0x0000, /* R170 - Battery Charger Control 3 */ + 0x0000, /* R171 */ + 0x0000, /* R172 - Current Sink Driver A */ + 0x0000, /* R173 - CSA Flash control */ + 0x0000, /* R174 - Current Sink Driver B */ + 0x0000, /* R175 - CSB Flash control */ + 0x0000, /* R176 - DCDC/LDO requested */ + 0x002D, /* R177 - DCDC Active options */ + 0x0000, /* R178 - DCDC Sleep options */ + 0x0025, /* R179 - Power-check comparator */ + 0x0062, /* R180 - DCDC1 Control */ + 0x0400, /* R181 - DCDC1 Timeouts */ + 0x1006, /* R182 - DCDC1 Low Power */ + 0x0018, /* R183 - DCDC2 Control */ + 0x0000, /* R184 - DCDC2 Timeouts */ + 0x0000, /* R185 */ + 0x0026, /* R186 - DCDC3 Control */ + 0x0400, /* R187 - DCDC3 Timeouts */ + 0x0006, /* R188 - DCDC3 Low Power */ + 0x0062, /* R189 - DCDC4 Control */ + 0x0400, /* R190 - DCDC4 Timeouts */ + 0x0006, /* R191 - DCDC4 Low Power */ + 0x0008, /* R192 - DCDC5 Control */ + 0x0000, /* R193 - DCDC5 Timeouts */ + 0x0000, /* R194 */ + 0x0026, /* R195 - DCDC6 Control */ + 0x0800, /* R196 - DCDC6 Timeouts */ + 0x0006, /* R197 - DCDC6 Low Power */ + 0x0000, /* R198 */ + 0x0003, /* R199 - Limit Switch Control */ + 0x0006, /* R200 - LDO1 Control */ + 0x0400, /* R201 - LDO1 Timeouts */ + 0x001C, /* R202 - LDO1 Low Power */ + 0x0006, /* R203 - LDO2 Control */ + 0x0400, /* R204 - LDO2 Timeouts */ + 0x001C, /* R205 - LDO2 Low Power */ + 0x001B, /* R206 - LDO3 Control */ + 0x0000, /* R207 - LDO3 Timeouts */ + 0x001C, /* R208 - LDO3 Low Power */ + 0x001B, /* R209 - LDO4 Control */ + 0x0000, /* R210 - LDO4 Timeouts */ + 0x001C, /* R211 - LDO4 Low Power */ + 0x0000, /* R212 */ + 0x0000, /* R213 */ + 0x0000, /* R214 */ + 0x0000, /* R215 - VCC_FAULT Masks */ + 0x001F, /* R216 - Main Bandgap Control */ + 0x0000, /* R217 - OSC Control */ + 0x9000, /* R218 - RTC Tick Control */ + 0x0000, /* R219 */ + 0x4000, /* R220 - RAM BIST 1 */ + 0x0000, /* R221 */ + 0x0000, /* R222 */ + 0x0000, /* R223 */ + 0x0000, /* R224 */ + 0x0000, /* R225 - DCDC/LDO status */ + 0x0000, /* R226 */ + 0x0000, /* R227 */ + 0x0000, /* R228 */ + 0x0000, /* R229 */ + 0xE000, /* R230 - GPIO Pin Status */ + 0x0000, /* R231 */ + 0x0000, /* R232 */ + 0x0000, /* R233 */ + 0x0000, /* R234 */ + 0x0000, /* R235 */ + 0x0000, /* R236 */ + 0x0000, /* R237 */ + 0x0000, /* R238 */ + 0x0000, /* R239 */ + 0x0000, /* R240 */ + 0x0000, /* R241 */ + 0x0000, /* R242 */ + 0x0000, /* R243 */ + 0x0000, /* R244 */ + 0x0000, /* R245 */ + 0x0000, /* R246 */ + 0x0000, /* R247 */ + 0x0000, /* R248 */ + 0x0000, /* R249 */ + 0x0000, /* R250 */ + 0x0000, /* R251 */ + 0x0000, /* R252 */ + 0x0000, /* R253 */ + 0x0000, /* R254 */ + 0x0000, /* R255 */ +}; +#endif + +#ifdef CONFIG_MFD_WM8350_CONFIG_MODE_2 + +#undef WM8350_HAVE_CONFIG_MODE +#define WM8350_HAVE_CONFIG_MODE + +const u16 wm8350_mode2_defaults[] = { + 0x17FF, /* R0 - Reset/ID */ + 0x1000, /* R1 - ID */ + 0x0000, /* R2 */ + 0x1002, /* R3 - System Control 1 */ + 0x0014, /* R4 - System Control 2 */ + 0x0000, /* R5 - System Hibernate */ + 0x8A00, /* R6 - Interface Control */ + 0x0000, /* R7 */ + 0x8000, /* R8 - Power mgmt (1) */ + 0x0000, /* R9 - Power mgmt (2) */ + 0x0000, /* R10 - Power mgmt (3) */ + 0x2000, /* R11 - Power mgmt (4) */ + 0x0E00, /* R12 - Power mgmt (5) */ + 0x0000, /* R13 - Power mgmt (6) */ + 0x0000, /* R14 - Power mgmt (7) */ + 0x0000, /* R15 */ + 0x0000, /* R16 - RTC Seconds/Minutes */ + 0x0100, /* R17 - RTC Hours/Day */ + 0x0101, /* R18 - RTC Date/Month */ + 0x1400, /* R19 - RTC Year */ + 0x0000, /* R20 - Alarm Seconds/Minutes */ + 0x0000, /* R21 - Alarm Hours/Day */ + 0x0000, /* R22 - Alarm Date/Month */ + 0x0320, /* R23 - RTC Time Control */ + 0x0000, /* R24 - System Interrupts */ + 0x0000, /* R25 - Interrupt Status 1 */ + 0x0000, /* R26 - Interrupt Status 2 */ + 0x0000, /* R27 - Power Up Interrupt Status */ + 0x0000, /* R28 - Under Voltage Interrupt status */ + 0x0000, /* R29 - Over Current Interrupt status */ + 0x0000, /* R30 - GPIO Interrupt Status */ + 0x0000, /* R31 - Comparator Interrupt Status */ + 0x3FFF, /* R32 - System Interrupts Mask */ + 0x0000, /* R33 - Interrupt Status 1 Mask */ + 0x0000, /* R34 - Interrupt Status 2 Mask */ + 0x0000, /* R35 - Power Up Interrupt Status Mask */ + 0x0000, /* R36 - Under Voltage Interrupt status Mask */ + 0x0000, /* R37 - Over Current Interrupt status Mask */ + 0x0000, /* R38 - GPIO Interrupt Status Mask */ + 0x0000, /* R39 - Comparator Interrupt Status Mask */ + 0x0040, /* R40 - Clock Control 1 */ + 0x0000, /* R41 - Clock Control 2 */ + 0x3B00, /* R42 - FLL Control 1 */ + 0x7086, /* R43 - FLL Control 2 */ + 0xC226, /* R44 - FLL Control 3 */ + 0x0000, /* R45 - FLL Control 4 */ + 0x0000, /* R46 */ + 0x0000, /* R47 */ + 0x0000, /* R48 - DAC Control */ + 0x0000, /* R49 */ + 0x00C0, /* R50 - DAC Digital Volume L */ + 0x00C0, /* R51 - DAC Digital Volume R */ + 0x0000, /* R52 */ + 0x0040, /* R53 - DAC LR Rate */ + 0x0000, /* R54 - DAC Clock Control */ + 0x0000, /* R55 */ + 0x0000, /* R56 */ + 0x0000, /* R57 */ + 0x4000, /* R58 - DAC Mute */ + 0x0000, /* R59 - DAC Mute Volume */ + 0x0000, /* R60 - DAC Side */ + 0x0000, /* R61 */ + 0x0000, /* R62 */ + 0x0000, /* R63 */ + 0x8000, /* R64 - ADC Control */ + 0x0000, /* R65 */ + 0x00C0, /* R66 - ADC Digital Volume L */ + 0x00C0, /* R67 - ADC Digital Volume R */ + 0x0000, /* R68 - ADC Divider */ + 0x0000, /* R69 */ + 0x0040, /* R70 - ADC LR Rate */ + 0x0000, /* R71 */ + 0x0303, /* R72 - Input Control */ + 0x0000, /* R73 - IN3 Input Control */ + 0x0000, /* R74 - Mic Bias Control */ + 0x0000, /* R75 */ + 0x0000, /* R76 - Output Control */ + 0x0000, /* R77 - Jack Detect */ + 0x0000, /* R78 - Anti Pop Control */ + 0x0000, /* R79 */ + 0x0040, /* R80 - Left Input Volume */ + 0x0040, /* R81 - Right Input Volume */ + 0x0000, /* R82 */ + 0x0000, /* R83 */ + 0x0000, /* R84 */ + 0x0000, /* R85 */ + 0x0000, /* R86 */ + 0x0000, /* R87 */ + 0x0800, /* R88 - Left Mixer Control */ + 0x1000, /* R89 - Right Mixer Control */ + 0x0000, /* R90 */ + 0x0000, /* R91 */ + 0x0000, /* R92 - OUT3 Mixer Control */ + 0x0000, /* R93 - OUT4 Mixer Control */ + 0x0000, /* R94 */ + 0x0000, /* R95 */ + 0x0000, /* R96 - Output Left Mixer Volume */ + 0x0000, /* R97 - Output Right Mixer Volume */ + 0x0000, /* R98 - Input Mixer Volume L */ + 0x0000, /* R99 - Input Mixer Volume R */ + 0x0000, /* R100 - Input Mixer Volume */ + 0x0000, /* R101 */ + 0x0000, /* R102 */ + 0x0000, /* R103 */ + 0x00E4, /* R104 - LOUT1 Volume */ + 0x00E4, /* R105 - ROUT1 Volume */ + 0x00E4, /* R106 - LOUT2 Volume */ + 0x02E4, /* R107 - ROUT2 Volume */ + 0x0000, /* R108 */ + 0x0000, /* R109 */ + 0x0000, /* R110 */ + 0x0000, /* R111 - BEEP Volume */ + 0x0A00, /* R112 - AI Formating */ + 0x0000, /* R113 - ADC DAC COMP */ + 0x0020, /* R114 - AI ADC Control */ + 0x0020, /* R115 - AI DAC Control */ + 0x0000, /* R116 - AIF Test */ + 0x0000, /* R117 */ + 0x0000, /* R118 */ + 0x0000, /* R119 */ + 0x0000, /* R120 */ + 0x0000, /* R121 */ + 0x0000, /* R122 */ + 0x0000, /* R123 */ + 0x0000, /* R124 */ + 0x0000, /* R125 */ + 0x0000, /* R126 */ + 0x0000, /* R127 */ + 0x1FFF, /* R128 - GPIO Debounce */ + 0x0000, /* R129 - GPIO Pin pull up Control */ + 0x03FC, /* R130 - GPIO Pull down Control */ + 0x0000, /* R131 - GPIO Interrupt Mode */ + 0x0000, /* R132 */ + 0x0000, /* R133 - GPIO Control */ + 0x08FB, /* R134 - GPIO Configuration (i/o) */ + 0x0CFE, /* R135 - GPIO Pin Polarity / Type */ + 0x0000, /* R136 */ + 0x0000, /* R137 */ + 0x0000, /* R138 */ + 0x0000, /* R139 */ + 0x0312, /* R140 - GPIO Function Select 1 */ + 0x0003, /* R141 - GPIO Function Select 2 */ + 0x2331, /* R142 - GPIO Function Select 3 */ + 0x0003, /* R143 - GPIO Function Select 4 */ + 0x0000, /* R144 - Digitiser Control (1) */ + 0x0002, /* R145 - Digitiser Control (2) */ + 0x0000, /* R146 */ + 0x0000, /* R147 */ + 0x0000, /* R148 */ + 0x0000, /* R149 */ + 0x0000, /* R150 */ + 0x0000, /* R151 */ + 0x7000, /* R152 - AUX1 Readback */ + 0x7000, /* R153 - AUX2 Readback */ + 0x7000, /* R154 - AUX3 Readback */ + 0x7000, /* R155 - AUX4 Readback */ + 0x0000, /* R156 - USB Voltage Readback */ + 0x0000, /* R157 - LINE Voltage Readback */ + 0x0000, /* R158 - BATT Voltage Readback */ + 0x0000, /* R159 - Chip Temp Readback */ + 0x0000, /* R160 */ + 0x0000, /* R161 */ + 0x0000, /* R162 */ + 0x0000, /* R163 - Generic Comparator Control */ + 0x0000, /* R164 - Generic comparator 1 */ + 0x0000, /* R165 - Generic comparator 2 */ + 0x0000, /* R166 - Generic comparator 3 */ + 0x0000, /* R167 - Generic comparator 4 */ + 0xA00F, /* R168 - Battery Charger Control 1 */ + 0x0B06, /* R169 - Battery Charger Control 2 */ + 0x0000, /* R170 - Battery Charger Control 3 */ + 0x0000, /* R171 */ + 0x0000, /* R172 - Current Sink Driver A */ + 0x0000, /* R173 - CSA Flash control */ + 0x0000, /* R174 - Current Sink Driver B */ + 0x0000, /* R175 - CSB Flash control */ + 0x0000, /* R176 - DCDC/LDO requested */ + 0x002D, /* R177 - DCDC Active options */ + 0x0000, /* R178 - DCDC Sleep options */ + 0x0025, /* R179 - Power-check comparator */ + 0x000E, /* R180 - DCDC1 Control */ + 0x0400, /* R181 - DCDC1 Timeouts */ + 0x1006, /* R182 - DCDC1 Low Power */ + 0x0018, /* R183 - DCDC2 Control */ + 0x0000, /* R184 - DCDC2 Timeouts */ + 0x0000, /* R185 */ + 0x002E, /* R186 - DCDC3 Control */ + 0x0800, /* R187 - DCDC3 Timeouts */ + 0x0006, /* R188 - DCDC3 Low Power */ + 0x000E, /* R189 - DCDC4 Control */ + 0x0800, /* R190 - DCDC4 Timeouts */ + 0x0006, /* R191 - DCDC4 Low Power */ + 0x0008, /* R192 - DCDC5 Control */ + 0x0000, /* R193 - DCDC5 Timeouts */ + 0x0000, /* R194 */ + 0x0026, /* R195 - DCDC6 Control */ + 0x0C00, /* R196 - DCDC6 Timeouts */ + 0x0006, /* R197 - DCDC6 Low Power */ + 0x0000, /* R198 */ + 0x0003, /* R199 - Limit Switch Control */ + 0x001A, /* R200 - LDO1 Control */ + 0x0800, /* R201 - LDO1 Timeouts */ + 0x001C, /* R202 - LDO1 Low Power */ + 0x0010, /* R203 - LDO2 Control */ + 0x0800, /* R204 - LDO2 Timeouts */ + 0x001C, /* R205 - LDO2 Low Power */ + 0x000A, /* R206 - LDO3 Control */ + 0x0C00, /* R207 - LDO3 Timeouts */ + 0x001C, /* R208 - LDO3 Low Power */ + 0x001A, /* R209 - LDO4 Control */ + 0x0800, /* R210 - LDO4 Timeouts */ + 0x001C, /* R211 - LDO4 Low Power */ + 0x0000, /* R212 */ + 0x0000, /* R213 */ + 0x0000, /* R214 */ + 0x0000, /* R215 - VCC_FAULT Masks */ + 0x001F, /* R216 - Main Bandgap Control */ + 0x0000, /* R217 - OSC Control */ + 0x9000, /* R218 - RTC Tick Control */ + 0x0000, /* R219 */ + 0x4000, /* R220 - RAM BIST 1 */ + 0x0000, /* R221 */ + 0x0000, /* R222 */ + 0x0000, /* R223 */ + 0x0000, /* R224 */ + 0x0000, /* R225 - DCDC/LDO status */ + 0x0000, /* R226 */ + 0x0000, /* R227 */ + 0x0000, /* R228 */ + 0x0000, /* R229 */ + 0xE000, /* R230 - GPIO Pin Status */ + 0x0000, /* R231 */ + 0x0000, /* R232 */ + 0x0000, /* R233 */ + 0x0000, /* R234 */ + 0x0000, /* R235 */ + 0x0000, /* R236 */ + 0x0000, /* R237 */ + 0x0000, /* R238 */ + 0x0000, /* R239 */ + 0x0000, /* R240 */ + 0x0000, /* R241 */ + 0x0000, /* R242 */ + 0x0000, /* R243 */ + 0x0000, /* R244 */ + 0x0000, /* R245 */ + 0x0000, /* R246 */ + 0x0000, /* R247 */ + 0x0000, /* R248 */ + 0x0000, /* R249 */ + 0x0000, /* R250 */ + 0x0000, /* R251 */ + 0x0000, /* R252 */ + 0x0000, /* R253 */ + 0x0000, /* R254 */ + 0x0000, /* R255 */ +}; +#endif + +#ifdef CONFIG_MFD_WM8350_CONFIG_MODE_3 + +#undef WM8350_HAVE_CONFIG_MODE +#define WM8350_HAVE_CONFIG_MODE + +const u16 wm8350_mode3_defaults[] = { + 0x17FF, /* R0 - Reset/ID */ + 0x1000, /* R1 - ID */ + 0x0000, /* R2 */ + 0x1000, /* R3 - System Control 1 */ + 0x0004, /* R4 - System Control 2 */ + 0x0000, /* R5 - System Hibernate */ + 0x8A00, /* R6 - Interface Control */ + 0x0000, /* R7 */ + 0x8000, /* R8 - Power mgmt (1) */ + 0x0000, /* R9 - Power mgmt (2) */ + 0x0000, /* R10 - Power mgmt (3) */ + 0x2000, /* R11 - Power mgmt (4) */ + 0x0E00, /* R12 - Power mgmt (5) */ + 0x0000, /* R13 - Power mgmt (6) */ + 0x0000, /* R14 - Power mgmt (7) */ + 0x0000, /* R15 */ + 0x0000, /* R16 - RTC Seconds/Minutes */ + 0x0100, /* R17 - RTC Hours/Day */ + 0x0101, /* R18 - RTC Date/Month */ + 0x1400, /* R19 - RTC Year */ + 0x0000, /* R20 - Alarm Seconds/Minutes */ + 0x0000, /* R21 - Alarm Hours/Day */ + 0x0000, /* R22 - Alarm Date/Month */ + 0x0320, /* R23 - RTC Time Control */ + 0x0000, /* R24 - System Interrupts */ + 0x0000, /* R25 - Interrupt Status 1 */ + 0x0000, /* R26 - Interrupt Status 2 */ + 0x0000, /* R27 - Power Up Interrupt Status */ + 0x0000, /* R28 - Under Voltage Interrupt status */ + 0x0000, /* R29 - Over Current Interrupt status */ + 0x0000, /* R30 - GPIO Interrupt Status */ + 0x0000, /* R31 - Comparator Interrupt Status */ + 0x3FFF, /* R32 - System Interrupts Mask */ + 0x0000, /* R33 - Interrupt Status 1 Mask */ + 0x0000, /* R34 - Interrupt Status 2 Mask */ + 0x0000, /* R35 - Power Up Interrupt Status Mask */ + 0x0000, /* R36 - Under Voltage Interrupt status Mask */ + 0x0000, /* R37 - Over Current Interrupt status Mask */ + 0x0000, /* R38 - GPIO Interrupt Status Mask */ + 0x0000, /* R39 - Comparator Interrupt Status Mask */ + 0x0040, /* R40 - Clock Control 1 */ + 0x0000, /* R41 - Clock Control 2 */ + 0x3B00, /* R42 - FLL Control 1 */ + 0x7086, /* R43 - FLL Control 2 */ + 0xC226, /* R44 - FLL Control 3 */ + 0x0000, /* R45 - FLL Control 4 */ + 0x0000, /* R46 */ + 0x0000, /* R47 */ + 0x0000, /* R48 - DAC Control */ + 0x0000, /* R49 */ + 0x00C0, /* R50 - DAC Digital Volume L */ + 0x00C0, /* R51 - DAC Digital Volume R */ + 0x0000, /* R52 */ + 0x0040, /* R53 - DAC LR Rate */ + 0x0000, /* R54 - DAC Clock Control */ + 0x0000, /* R55 */ + 0x0000, /* R56 */ + 0x0000, /* R57 */ + 0x4000, /* R58 - DAC Mute */ + 0x0000, /* R59 - DAC Mute Volume */ + 0x0000, /* R60 - DAC Side */ + 0x0000, /* R61 */ + 0x0000, /* R62 */ + 0x0000, /* R63 */ + 0x8000, /* R64 - ADC Control */ + 0x0000, /* R65 */ + 0x00C0, /* R66 - ADC Digital Volume L */ + 0x00C0, /* R67 - ADC Digital Volume R */ + 0x0000, /* R68 - ADC Divider */ + 0x0000, /* R69 */ + 0x0040, /* R70 - ADC LR Rate */ + 0x0000, /* R71 */ + 0x0303, /* R72 - Input Control */ + 0x0000, /* R73 - IN3 Input Control */ + 0x0000, /* R74 - Mic Bias Control */ + 0x0000, /* R75 */ + 0x0000, /* R76 - Output Control */ + 0x0000, /* R77 - Jack Detect */ + 0x0000, /* R78 - Anti Pop Control */ + 0x0000, /* R79 */ + 0x0040, /* R80 - Left Input Volume */ + 0x0040, /* R81 - Right Input Volume */ + 0x0000, /* R82 */ + 0x0000, /* R83 */ + 0x0000, /* R84 */ + 0x0000, /* R85 */ + 0x0000, /* R86 */ + 0x0000, /* R87 */ + 0x0800, /* R88 - Left Mixer Control */ + 0x1000, /* R89 - Right Mixer Control */ + 0x0000, /* R90 */ + 0x0000, /* R91 */ + 0x0000, /* R92 - OUT3 Mixer Control */ + 0x0000, /* R93 - OUT4 Mixer Control */ + 0x0000, /* R94 */ + 0x0000, /* R95 */ + 0x0000, /* R96 - Output Left Mixer Volume */ + 0x0000, /* R97 - Output Right Mixer Volume */ + 0x0000, /* R98 - Input Mixer Volume L */ + 0x0000, /* R99 - Input Mixer Volume R */ + 0x0000, /* R100 - Input Mixer Volume */ + 0x0000, /* R101 */ + 0x0000, /* R102 */ + 0x0000, /* R103 */ + 0x00E4, /* R104 - LOUT1 Volume */ + 0x00E4, /* R105 - ROUT1 Volume */ + 0x00E4, /* R106 - LOUT2 Volume */ + 0x02E4, /* R107 - ROUT2 Volume */ + 0x0000, /* R108 */ + 0x0000, /* R109 */ + 0x0000, /* R110 */ + 0x0000, /* R111 - BEEP Volume */ + 0x0A00, /* R112 - AI Formating */ + 0x0000, /* R113 - ADC DAC COMP */ + 0x0020, /* R114 - AI ADC Control */ + 0x0020, /* R115 - AI DAC Control */ + 0x0000, /* R116 - AIF Test */ + 0x0000, /* R117 */ + 0x0000, /* R118 */ + 0x0000, /* R119 */ + 0x0000, /* R120 */ + 0x0000, /* R121 */ + 0x0000, /* R122 */ + 0x0000, /* R123 */ + 0x0000, /* R124 */ + 0x0000, /* R125 */ + 0x0000, /* R126 */ + 0x0000, /* R127 */ + 0x1FFF, /* R128 - GPIO Debounce */ + 0x0000, /* R129 - GPIO Pin pull up Control */ + 0x03FC, /* R130 - GPIO Pull down Control */ + 0x0000, /* R131 - GPIO Interrupt Mode */ + 0x0000, /* R132 */ + 0x0000, /* R133 - GPIO Control */ + 0x0A7B, /* R134 - GPIO Configuration (i/o) */ + 0x06FE, /* R135 - GPIO Pin Polarity / Type */ + 0x0000, /* R136 */ + 0x0000, /* R137 */ + 0x0000, /* R138 */ + 0x0000, /* R139 */ + 0x1312, /* R140 - GPIO Function Select 1 */ + 0x1030, /* R141 - GPIO Function Select 2 */ + 0x2231, /* R142 - GPIO Function Select 3 */ + 0x0003, /* R143 - GPIO Function Select 4 */ + 0x0000, /* R144 - Digitiser Control (1) */ + 0x0002, /* R145 - Digitiser Control (2) */ + 0x0000, /* R146 */ + 0x0000, /* R147 */ + 0x0000, /* R148 */ + 0x0000, /* R149 */ + 0x0000, /* R150 */ + 0x0000, /* R151 */ + 0x7000, /* R152 - AUX1 Readback */ + 0x7000, /* R153 - AUX2 Readback */ + 0x7000, /* R154 - AUX3 Readback */ + 0x7000, /* R155 - AUX4 Readback */ + 0x0000, /* R156 - USB Voltage Readback */ + 0x0000, /* R157 - LINE Voltage Readback */ + 0x0000, /* R158 - BATT Voltage Readback */ + 0x0000, /* R159 - Chip Temp Readback */ + 0x0000, /* R160 */ + 0x0000, /* R161 */ + 0x0000, /* R162 */ + 0x0000, /* R163 - Generic Comparator Control */ + 0x0000, /* R164 - Generic comparator 1 */ + 0x0000, /* R165 - Generic comparator 2 */ + 0x0000, /* R166 - Generic comparator 3 */ + 0x0000, /* R167 - Generic comparator 4 */ + 0xA00F, /* R168 - Battery Charger Control 1 */ + 0x0B06, /* R169 - Battery Charger Control 2 */ + 0x0000, /* R170 - Battery Charger Control 3 */ + 0x0000, /* R171 */ + 0x0000, /* R172 - Current Sink Driver A */ + 0x0000, /* R173 - CSA Flash control */ + 0x0000, /* R174 - Current Sink Driver B */ + 0x0000, /* R175 - CSB Flash control */ + 0x0000, /* R176 - DCDC/LDO requested */ + 0x002D, /* R177 - DCDC Active options */ + 0x0000, /* R178 - DCDC Sleep options */ + 0x0025, /* R179 - Power-check comparator */ + 0x000E, /* R180 - DCDC1 Control */ + 0x0400, /* R181 - DCDC1 Timeouts */ + 0x1006, /* R182 - DCDC1 Low Power */ + 0x0018, /* R183 - DCDC2 Control */ + 0x0000, /* R184 - DCDC2 Timeouts */ + 0x0000, /* R185 */ + 0x000E, /* R186 - DCDC3 Control */ + 0x0400, /* R187 - DCDC3 Timeouts */ + 0x0006, /* R188 - DCDC3 Low Power */ + 0x0026, /* R189 - DCDC4 Control */ + 0x0400, /* R190 - DCDC4 Timeouts */ + 0x0006, /* R191 - DCDC4 Low Power */ + 0x0008, /* R192 - DCDC5 Control */ + 0x0000, /* R193 - DCDC5 Timeouts */ + 0x0000, /* R194 */ + 0x0026, /* R195 - DCDC6 Control */ + 0x0400, /* R196 - DCDC6 Timeouts */ + 0x0006, /* R197 - DCDC6 Low Power */ + 0x0000, /* R198 */ + 0x0003, /* R199 - Limit Switch Control */ + 0x001C, /* R200 - LDO1 Control */ + 0x0000, /* R201 - LDO1 Timeouts */ + 0x001C, /* R202 - LDO1 Low Power */ + 0x001C, /* R203 - LDO2 Control */ + 0x0400, /* R204 - LDO2 Timeouts */ + 0x001C, /* R205 - LDO2 Low Power */ + 0x001C, /* R206 - LDO3 Control */ + 0x0400, /* R207 - LDO3 Timeouts */ + 0x001C, /* R208 - LDO3 Low Power */ + 0x001F, /* R209 - LDO4 Control */ + 0x0400, /* R210 - LDO4 Timeouts */ + 0x001C, /* R211 - LDO4 Low Power */ + 0x0000, /* R212 */ + 0x0000, /* R213 */ + 0x0000, /* R214 */ + 0x0000, /* R215 - VCC_FAULT Masks */ + 0x001F, /* R216 - Main Bandgap Control */ + 0x0000, /* R217 - OSC Control */ + 0x9000, /* R218 - RTC Tick Control */ + 0x0000, /* R219 */ + 0x4000, /* R220 - RAM BIST 1 */ + 0x0000, /* R221 */ + 0x0000, /* R222 */ + 0x0000, /* R223 */ + 0x0000, /* R224 */ + 0x0000, /* R225 - DCDC/LDO status */ + 0x0000, /* R226 */ + 0x0000, /* R227 */ + 0x0000, /* R228 */ + 0x0000, /* R229 */ + 0xE000, /* R230 - GPIO Pin Status */ + 0x0000, /* R231 */ + 0x0000, /* R232 */ + 0x0000, /* R233 */ + 0x0000, /* R234 */ + 0x0000, /* R235 */ + 0x0000, /* R236 */ + 0x0000, /* R237 */ + 0x0000, /* R238 */ + 0x0000, /* R239 */ + 0x0000, /* R240 */ + 0x0000, /* R241 */ + 0x0000, /* R242 */ + 0x0000, /* R243 */ + 0x0000, /* R244 */ + 0x0000, /* R245 */ + 0x0000, /* R246 */ + 0x0000, /* R247 */ + 0x0000, /* R248 */ + 0x0000, /* R249 */ + 0x0000, /* R250 */ + 0x0000, /* R251 */ + 0x0000, /* R252 */ + 0x0000, /* R253 */ + 0x0000, /* R254 */ + 0x0000, /* R255 */ +}; +#endif + +/* The register defaults for the config mode used must be compiled in but + * due to the impact on kernel size it is possible to disable + */ +#ifndef WM8350_HAVE_CONFIG_MODE +#warning No WM8350 config modes supported - select at least one of the +#warning MFD_WM8350_CONFIG_MODE_n options from the board driver. +#endif + +/* + * Access masks. + */ + +const struct wm8350_reg_access wm8350_reg_io_map[] = { + /* read write volatile */ + { 0xFFFF, 0xFFFF, 0xFFFF }, /* R0 - Reset/ID */ + { 0x7CFF, 0x0C00, 0x7FFF }, /* R1 - ID */ + { 0x0000, 0x0000, 0x0000 }, /* R2 */ + { 0xBE3B, 0xBE3B, 0x8000 }, /* R3 - System Control 1 */ + { 0xFCF7, 0xFCF7, 0xF800 }, /* R4 - System Control 2 */ + { 0x80FF, 0x80FF, 0x8000 }, /* R5 - System Hibernate */ + { 0xFB0E, 0xFB0E, 0x0000 }, /* R6 - Interface Control */ + { 0x0000, 0x0000, 0x0000 }, /* R7 */ + { 0xE537, 0xE537, 0xFFFF }, /* R8 - Power mgmt (1) */ + { 0x0FF3, 0x0FF3, 0xFFFF }, /* R9 - Power mgmt (2) */ + { 0x008F, 0x008F, 0xFFFF }, /* R10 - Power mgmt (3) */ + { 0x6D3C, 0x6D3C, 0xFFFF }, /* R11 - Power mgmt (4) */ + { 0x1F8F, 0x1F8F, 0xFFFF }, /* R12 - Power mgmt (5) */ + { 0x8F3F, 0x8F3F, 0xFFFF }, /* R13 - Power mgmt (6) */ + { 0x0003, 0x0003, 0xFFFF }, /* R14 - Power mgmt (7) */ + { 0x0000, 0x0000, 0x0000 }, /* R15 */ + { 0x7F7F, 0x7F7F, 0xFFFF }, /* R16 - RTC Seconds/Minutes */ + { 0x073F, 0x073F, 0xFFFF }, /* R17 - RTC Hours/Day */ + { 0x1F3F, 0x1F3F, 0xFFFF }, /* R18 - RTC Date/Month */ + { 0x3FFF, 0x00FF, 0xFFFF }, /* R19 - RTC Year */ + { 0x7F7F, 0x7F7F, 0x0000 }, /* R20 - Alarm Seconds/Minutes */ + { 0x0F3F, 0x0F3F, 0x0000 }, /* R21 - Alarm Hours/Day */ + { 0x1F3F, 0x1F3F, 0x0000 }, /* R22 - Alarm Date/Month */ + { 0xEF7F, 0xEA7F, 0xFFFF }, /* R23 - RTC Time Control */ + { 0x3BFF, 0x0000, 0xFFFF }, /* R24 - System Interrupts */ + { 0xFEE7, 0x0000, 0xFFFF }, /* R25 - Interrupt Status 1 */ + { 0x35FF, 0x0000, 0xFFFF }, /* R26 - Interrupt Status 2 */ + { 0x0F3F, 0x0000, 0xFFFF }, /* R27 - Power Up Interrupt Status */ + { 0x0F3F, 0x0000, 0xFFFF }, /* R28 - Under Voltage Interrupt status */ + { 0x8000, 0x0000, 0xFFFF }, /* R29 - Over Current Interrupt status */ + { 0x1FFF, 0x0000, 0xFFFF }, /* R30 - GPIO Interrupt Status */ + { 0xEF7F, 0x0000, 0xFFFF }, /* R31 - Comparator Interrupt Status */ + { 0x3FFF, 0x3FFF, 0x0000 }, /* R32 - System Interrupts Mask */ + { 0xFEE7, 0xFEE7, 0x0000 }, /* R33 - Interrupt Status 1 Mask */ + { 0xF5FF, 0xF5FF, 0x0000 }, /* R34 - Interrupt Status 2 Mask */ + { 0x0F3F, 0x0F3F, 0x0000 }, /* R35 - Power Up Interrupt Status Mask */ + { 0x0F3F, 0x0F3F, 0x0000 }, /* R36 - Under Voltage Int status Mask */ + { 0x8000, 0x8000, 0x0000 }, /* R37 - Over Current Int status Mask */ + { 0x1FFF, 0x1FFF, 0x0000 }, /* R38 - GPIO Interrupt Status Mask */ + { 0xEF7F, 0xEF7F, 0x0000 }, /* R39 - Comparator IntStatus Mask */ + { 0xC9F7, 0xC9F7, 0xFFFF }, /* R40 - Clock Control 1 */ + { 0x8001, 0x8001, 0x0000 }, /* R41 - Clock Control 2 */ + { 0xFFF7, 0xFFF7, 0xFFFF }, /* R42 - FLL Control 1 */ + { 0xFBFF, 0xFBFF, 0x0000 }, /* R43 - FLL Control 2 */ + { 0xFFFF, 0xFFFF, 0x0000 }, /* R44 - FLL Control 3 */ + { 0x0033, 0x0033, 0x0000 }, /* R45 - FLL Control 4 */ + { 0x0000, 0x0000, 0x0000 }, /* R46 */ + { 0x0000, 0x0000, 0x0000 }, /* R47 */ + { 0x3033, 0x3033, 0x0000 }, /* R48 - DAC Control */ + { 0x0000, 0x0000, 0x0000 }, /* R49 */ + { 0x81FF, 0x81FF, 0xFFFF }, /* R50 - DAC Digital Volume L */ + { 0x81FF, 0x81FF, 0xFFFF }, /* R51 - DAC Digital Volume R */ + { 0x0000, 0x0000, 0x0000 }, /* R52 */ + { 0x0FFF, 0x0FFF, 0xFFFF }, /* R53 - DAC LR Rate */ + { 0x0017, 0x0017, 0x0000 }, /* R54 - DAC Clock Control */ + { 0x0000, 0x0000, 0x0000 }, /* R55 */ + { 0x0000, 0x0000, 0x0000 }, /* R56 */ + { 0x0000, 0x0000, 0x0000 }, /* R57 */ + { 0x4000, 0x4000, 0x0000 }, /* R58 - DAC Mute */ + { 0x7000, 0x7000, 0x0000 }, /* R59 - DAC Mute Volume */ + { 0x3C00, 0x3C00, 0x0000 }, /* R60 - DAC Side */ + { 0x0000, 0x0000, 0x0000 }, /* R61 */ + { 0x0000, 0x0000, 0x0000 }, /* R62 */ + { 0x0000, 0x0000, 0x0000 }, /* R63 */ + { 0x8303, 0x8303, 0xFFFF }, /* R64 - ADC Control */ + { 0x0000, 0x0000, 0x0000 }, /* R65 */ + { 0x81FF, 0x81FF, 0xFFFF }, /* R66 - ADC Digital Volume L */ + { 0x81FF, 0x81FF, 0xFFFF }, /* R67 - ADC Digital Volume R */ + { 0x0FFF, 0x0FFF, 0x0000 }, /* R68 - ADC Divider */ + { 0x0000, 0x0000, 0x0000 }, /* R69 */ + { 0x0FFF, 0x0FFF, 0xFFFF }, /* R70 - ADC LR Rate */ + { 0x0000, 0x0000, 0x0000 }, /* R71 */ + { 0x0707, 0x0707, 0xFFFF }, /* R72 - Input Control */ + { 0xC0C0, 0xC0C0, 0xFFFF }, /* R73 - IN3 Input Control */ + { 0xC09F, 0xC09F, 0xFFFF }, /* R74 - Mic Bias Control */ + { 0x0000, 0x0000, 0x0000 }, /* R75 */ + { 0x0F15, 0x0F15, 0xFFFF }, /* R76 - Output Control */ + { 0xC000, 0xC000, 0xFFFF }, /* R77 - Jack Detect */ + { 0x03FF, 0x03FF, 0x0000 }, /* R78 - Anti Pop Control */ + { 0x0000, 0x0000, 0x0000 }, /* R79 */ + { 0xE1FC, 0xE1FC, 0x8000 }, /* R80 - Left Input Volume */ + { 0xE1FC, 0xE1FC, 0x8000 }, /* R81 - Right Input Volume */ + { 0x0000, 0x0000, 0x0000 }, /* R82 */ + { 0x0000, 0x0000, 0x0000 }, /* R83 */ + { 0x0000, 0x0000, 0x0000 }, /* R84 */ + { 0x0000, 0x0000, 0x0000 }, /* R85 */ + { 0x0000, 0x0000, 0x0000 }, /* R86 */ + { 0x0000, 0x0000, 0x0000 }, /* R87 */ + { 0x9807, 0x9807, 0xFFFF }, /* R88 - Left Mixer Control */ + { 0x980B, 0x980B, 0xFFFF }, /* R89 - Right Mixer Control */ + { 0x0000, 0x0000, 0x0000 }, /* R90 */ + { 0x0000, 0x0000, 0x0000 }, /* R91 */ + { 0x8909, 0x8909, 0xFFFF }, /* R92 - OUT3 Mixer Control */ + { 0x9E07, 0x9E07, 0xFFFF }, /* R93 - OUT4 Mixer Control */ + { 0x0000, 0x0000, 0x0000 }, /* R94 */ + { 0x0000, 0x0000, 0x0000 }, /* R95 */ + { 0x0EEE, 0x0EEE, 0x0000 }, /* R96 - Output Left Mixer Volume */ + { 0xE0EE, 0xE0EE, 0x0000 }, /* R97 - Output Right Mixer Volume */ + { 0x0E0F, 0x0E0F, 0x0000 }, /* R98 - Input Mixer Volume L */ + { 0xE0E1, 0xE0E1, 0x0000 }, /* R99 - Input Mixer Volume R */ + { 0x800E, 0x800E, 0x0000 }, /* R100 - Input Mixer Volume */ + { 0x0000, 0x0000, 0x0000 }, /* R101 */ + { 0x0000, 0x0000, 0x0000 }, /* R102 */ + { 0x0000, 0x0000, 0x0000 }, /* R103 */ + { 0xE1FC, 0xE1FC, 0xFFFF }, /* R104 - LOUT1 Volume */ + { 0xE1FC, 0xE1FC, 0xFFFF }, /* R105 - ROUT1 Volume */ + { 0xE1FC, 0xE1FC, 0xFFFF }, /* R106 - LOUT2 Volume */ + { 0xE7FC, 0xE7FC, 0xFFFF }, /* R107 - ROUT2 Volume */ + { 0x0000, 0x0000, 0x0000 }, /* R108 */ + { 0x0000, 0x0000, 0x0000 }, /* R109 */ + { 0x0000, 0x0000, 0x0000 }, /* R110 */ + { 0x80E0, 0x80E0, 0xFFFF }, /* R111 - BEEP Volume */ + { 0xBF00, 0xBF00, 0x0000 }, /* R112 - AI Formating */ + { 0x00F1, 0x00F1, 0x0000 }, /* R113 - ADC DAC COMP */ + { 0x00F8, 0x00F8, 0x0000 }, /* R114 - AI ADC Control */ + { 0x40FB, 0x40FB, 0x0000 }, /* R115 - AI DAC Control */ + { 0x7C30, 0x7C30, 0x0000 }, /* R116 - AIF Test */ + { 0x0000, 0x0000, 0x0000 }, /* R117 */ + { 0x0000, 0x0000, 0x0000 }, /* R118 */ + { 0x0000, 0x0000, 0x0000 }, /* R119 */ + { 0x0000, 0x0000, 0x0000 }, /* R120 */ + { 0x0000, 0x0000, 0x0000 }, /* R121 */ + { 0x0000, 0x0000, 0x0000 }, /* R122 */ + { 0x0000, 0x0000, 0x0000 }, /* R123 */ + { 0x0000, 0x0000, 0x0000 }, /* R124 */ + { 0x0000, 0x0000, 0x0000 }, /* R125 */ + { 0x0000, 0x0000, 0x0000 }, /* R126 */ + { 0x0000, 0x0000, 0x0000 }, /* R127 */ + { 0x1FFF, 0x1FFF, 0x0000 }, /* R128 - GPIO Debounce */ + { 0x1FFF, 0x1FFF, 0x0000 }, /* R129 - GPIO Pin pull up Control */ + { 0x1FFF, 0x1FFF, 0x0000 }, /* R130 - GPIO Pull down Control */ + { 0x1FFF, 0x1FFF, 0x0000 }, /* R131 - GPIO Interrupt Mode */ + { 0x0000, 0x0000, 0x0000 }, /* R132 */ + { 0x00C0, 0x00C0, 0x0000 }, /* R133 - GPIO Control */ + { 0x1FFF, 0x1FFF, 0x0000 }, /* R134 - GPIO Configuration (i/o) */ + { 0x1FFF, 0x1FFF, 0x0000 }, /* R135 - GPIO Pin Polarity / Type */ + { 0x0000, 0x0000, 0x0000 }, /* R136 */ + { 0x0000, 0x0000, 0x0000 }, /* R137 */ + { 0x0000, 0x0000, 0x0000 }, /* R138 */ + { 0x0000, 0x0000, 0x0000 }, /* R139 */ + { 0xFFFF, 0xFFFF, 0x0000 }, /* R140 - GPIO Function Select 1 */ + { 0xFFFF, 0xFFFF, 0x0000 }, /* R141 - GPIO Function Select 2 */ + { 0xFFFF, 0xFFFF, 0x0000 }, /* R142 - GPIO Function Select 3 */ + { 0x000F, 0x000F, 0x0000 }, /* R143 - GPIO Function Select 4 */ + { 0xF0FF, 0xF0FF, 0xA000 }, /* R144 - Digitiser Control (1) */ + { 0x3707, 0x3707, 0x0000 }, /* R145 - Digitiser Control (2) */ + { 0x0000, 0x0000, 0x0000 }, /* R146 */ + { 0x0000, 0x0000, 0x0000 }, /* R147 */ + { 0x0000, 0x0000, 0x0000 }, /* R148 */ + { 0x0000, 0x0000, 0x0000 }, /* R149 */ + { 0x0000, 0x0000, 0x0000 }, /* R150 */ + { 0x0000, 0x0000, 0x0000 }, /* R151 */ + { 0x7FFF, 0x7000, 0xFFFF }, /* R152 - AUX1 Readback */ + { 0x7FFF, 0x7000, 0xFFFF }, /* R153 - AUX2 Readback */ + { 0x7FFF, 0x7000, 0xFFFF }, /* R154 - AUX3 Readback */ + { 0x7FFF, 0x7000, 0xFFFF }, /* R155 - AUX4 Readback */ + { 0x0FFF, 0x0000, 0xFFFF }, /* R156 - USB Voltage Readback */ + { 0x0FFF, 0x0000, 0xFFFF }, /* R157 - LINE Voltage Readback */ + { 0x0FFF, 0x0000, 0xFFFF }, /* R158 - BATT Voltage Readback */ + { 0x0FFF, 0x0000, 0xFFFF }, /* R159 - Chip Temp Readback */ + { 0x0000, 0x0000, 0x0000 }, /* R160 */ + { 0x0000, 0x0000, 0x0000 }, /* R161 */ + { 0x0000, 0x0000, 0x0000 }, /* R162 */ + { 0x000F, 0x000F, 0x0000 }, /* R163 - Generic Comparator Control */ + { 0xFFFF, 0xFFFF, 0x0000 }, /* R164 - Generic comparator 1 */ + { 0xFFFF, 0xFFFF, 0x0000 }, /* R165 - Generic comparator 2 */ + { 0xFFFF, 0xFFFF, 0x0000 }, /* R166 - Generic comparator 3 */ + { 0xFFFF, 0xFFFF, 0x0000 }, /* R167 - Generic comparator 4 */ + { 0xBFFF, 0xBFFF, 0x8000 }, /* R168 - Battery Charger Control 1 */ + { 0xFFFF, 0x4FFF, 0xB000 }, /* R169 - Battery Charger Control 2 */ + { 0x007F, 0x007F, 0x0000 }, /* R170 - Battery Charger Control 3 */ + { 0x0000, 0x0000, 0x0000 }, /* R171 */ + { 0x903F, 0x903F, 0xFFFF }, /* R172 - Current Sink Driver A */ + { 0xE333, 0xE333, 0xFFFF }, /* R173 - CSA Flash control */ + { 0x903F, 0x903F, 0xFFFF }, /* R174 - Current Sink Driver B */ + { 0xE333, 0xE333, 0xFFFF }, /* R175 - CSB Flash control */ + { 0x8F3F, 0x8F3F, 0xFFFF }, /* R176 - DCDC/LDO requested */ + { 0x332D, 0x332D, 0x0000 }, /* R177 - DCDC Active options */ + { 0x002D, 0x002D, 0x0000 }, /* R178 - DCDC Sleep options */ + { 0x5177, 0x5177, 0x8000 }, /* R179 - Power-check comparator */ + { 0x047F, 0x047F, 0x0000 }, /* R180 - DCDC1 Control */ + { 0xFFC0, 0xFFC0, 0x0000 }, /* R181 - DCDC1 Timeouts */ + { 0x737F, 0x737F, 0x0000 }, /* R182 - DCDC1 Low Power */ + { 0x535B, 0x535B, 0x0000 }, /* R183 - DCDC2 Control */ + { 0xFFC0, 0xFFC0, 0x0000 }, /* R184 - DCDC2 Timeouts */ + { 0x0000, 0x0000, 0x0000 }, /* R185 */ + { 0x047F, 0x047F, 0x0000 }, /* R186 - DCDC3 Control */ + { 0xFFC0, 0xFFC0, 0x0000 }, /* R187 - DCDC3 Timeouts */ + { 0x737F, 0x737F, 0x0000 }, /* R188 - DCDC3 Low Power */ + { 0x047F, 0x047F, 0x0000 }, /* R189 - DCDC4 Control */ + { 0xFFC0, 0xFFC0, 0x0000 }, /* R190 - DCDC4 Timeouts */ + { 0x737F, 0x737F, 0x0000 }, /* R191 - DCDC4 Low Power */ + { 0x535B, 0x535B, 0x0000 }, /* R192 - DCDC5 Control */ + { 0xFFC0, 0xFFC0, 0x0000 }, /* R193 - DCDC5 Timeouts */ + { 0x0000, 0x0000, 0x0000 }, /* R194 */ + { 0x047F, 0x047F, 0x0000 }, /* R195 - DCDC6 Control */ + { 0xFFC0, 0xFFC0, 0x0000 }, /* R196 - DCDC6 Timeouts */ + { 0x737F, 0x737F, 0x0000 }, /* R197 - DCDC6 Low Power */ + { 0x0000, 0x0000, 0x0000 }, /* R198 */ + { 0xFFD3, 0xFFD3, 0x0000 }, /* R199 - Limit Switch Control */ + { 0x441F, 0x441F, 0x0000 }, /* R200 - LDO1 Control */ + { 0xFFC0, 0xFFC0, 0x0000 }, /* R201 - LDO1 Timeouts */ + { 0x331F, 0x331F, 0x0000 }, /* R202 - LDO1 Low Power */ + { 0x441F, 0x441F, 0x0000 }, /* R203 - LDO2 Control */ + { 0xFFC0, 0xFFC0, 0x0000 }, /* R204 - LDO2 Timeouts */ + { 0x331F, 0x331F, 0x0000 }, /* R205 - LDO2 Low Power */ + { 0x441F, 0x441F, 0x0000 }, /* R206 - LDO3 Control */ + { 0xFFC0, 0xFFC0, 0x0000 }, /* R207 - LDO3 Timeouts */ + { 0x331F, 0x331F, 0x0000 }, /* R208 - LDO3 Low Power */ + { 0x441F, 0x441F, 0x0000 }, /* R209 - LDO4 Control */ + { 0xFFC0, 0xFFC0, 0x0000 }, /* R210 - LDO4 Timeouts */ + { 0x331F, 0x331F, 0x0000 }, /* R211 - LDO4 Low Power */ + { 0x0000, 0x0000, 0x0000 }, /* R212 */ + { 0x0000, 0x0000, 0x0000 }, /* R213 */ + { 0x0000, 0x0000, 0x0000 }, /* R214 */ + { 0x8F3F, 0x8F3F, 0x0000 }, /* R215 - VCC_FAULT Masks */ + { 0xFF3F, 0xE03F, 0x0000 }, /* R216 - Main Bandgap Control */ + { 0xEF2F, 0xE02F, 0x0000 }, /* R217 - OSC Control */ + { 0xF3FF, 0xB3FF, 0xc000 }, /* R218 - RTC Tick Control */ + { 0xFFFF, 0xFFFF, 0xFFFF }, /* R219 */ + { 0x09FF, 0x01FF, 0x0000 }, /* R220 - RAM BIST 1 */ + { 0x0000, 0x0000, 0x0000 }, /* R221 */ + { 0xFFFF, 0xFFFF, 0xFFFF }, /* R222 */ + { 0xFFFF, 0xFFFF, 0xFFFF }, /* R223 */ + { 0x0000, 0x0000, 0x0000 }, /* R224 */ + { 0x8F3F, 0x0000, 0xFFFF }, /* R225 - DCDC/LDO status */ + { 0x0000, 0x0000, 0x0000 }, /* R226 */ + { 0x0000, 0x0000, 0xFFFF }, /* R227 */ + { 0x0000, 0x0000, 0x0000 }, /* R228 */ + { 0x0000, 0x0000, 0x0000 }, /* R229 */ + { 0xFFFF, 0x1FFF, 0xFFFF }, /* R230 - GPIO Pin Status */ + { 0xFFFF, 0x1FFF, 0xFFFF }, /* R231 */ + { 0xFFFF, 0x1FFF, 0xFFFF }, /* R232 */ + { 0xFFFF, 0x1FFF, 0xFFFF }, /* R233 */ + { 0x0000, 0x0000, 0x0000 }, /* R234 */ + { 0x0000, 0x0000, 0x0000 }, /* R235 */ + { 0x0000, 0x0000, 0x0000 }, /* R236 */ + { 0x0000, 0x0000, 0x0000 }, /* R237 */ + { 0x0000, 0x0000, 0x0000 }, /* R238 */ + { 0x0000, 0x0000, 0x0000 }, /* R239 */ + { 0x0000, 0x0000, 0x0000 }, /* R240 */ + { 0x0000, 0x0000, 0x0000 }, /* R241 */ + { 0x0000, 0x0000, 0x0000 }, /* R242 */ + { 0x0000, 0x0000, 0x0000 }, /* R243 */ + { 0x0000, 0x0000, 0x0000 }, /* R244 */ + { 0x0000, 0x0000, 0x0000 }, /* R245 */ + { 0x0000, 0x0000, 0x0000 }, /* R246 */ + { 0x0000, 0x0000, 0x0000 }, /* R247 */ + { 0xFFFF, 0x0010, 0xFFFF }, /* R248 */ + { 0x0000, 0x0000, 0x0000 }, /* R249 */ + { 0xFFFF, 0x0010, 0xFFFF }, /* R250 */ + { 0xFFFF, 0x0010, 0xFFFF }, /* R251 */ + { 0x0000, 0x0000, 0x0000 }, /* R252 */ + { 0xFFFF, 0x0010, 0xFFFF }, /* R253 */ + { 0x0000, 0x0000, 0x0000 }, /* R254 */ + { 0x0000, 0x0000, 0x0000 }, /* R255 */ +}; diff --git a/drivers/mfd/wm8400-core.c b/drivers/mfd/wm8400-core.c new file mode 100644 index 00000000000..6a0cedb5bb8 --- /dev/null +++ b/drivers/mfd/wm8400-core.c @@ -0,0 +1,455 @@ +/* + * Core driver for WM8400. + * + * Copyright 2008 Wolfson Microelectronics PLC. + * + * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + */ + +#include <linux/bug.h> +#include <linux/i2c.h> +#include <linux/kernel.h> +#include <linux/mfd/wm8400-private.h> +#include <linux/mfd/wm8400-audio.h> + +static struct { + u16 readable; /* Mask of readable bits */ + u16 writable; /* Mask of writable bits */ + u16 vol; /* Mask of volatile bits */ + int is_codec; /* Register controlled by codec reset */ + u16 default_val; /* Value on reset */ +} reg_data[] = { + { 0xFFFF, 0xFFFF, 0x0000, 0, 0x6172 }, /* R0 */ + { 0x7000, 0x0000, 0x8000, 0, 0x0000 }, /* R1 */ + { 0xFF17, 0xFF17, 0x0000, 0, 0x0000 }, /* R2 */ + { 0xEBF3, 0xEBF3, 0x0000, 1, 0x6000 }, /* R3 */ + { 0x3CF3, 0x3CF3, 0x0000, 1, 0x0000 }, /* R4 */ + { 0xF1F8, 0xF1F8, 0x0000, 1, 0x4050 }, /* R5 */ + { 0xFC1F, 0xFC1F, 0x0000, 1, 0x4000 }, /* R6 */ + { 0xDFDE, 0xDFDE, 0x0000, 1, 0x01C8 }, /* R7 */ + { 0xFCFC, 0xFCFC, 0x0000, 1, 0x0000 }, /* R8 */ + { 0xEFFF, 0xEFFF, 0x0000, 1, 0x0040 }, /* R9 */ + { 0xEFFF, 0xEFFF, 0x0000, 1, 0x0040 }, /* R10 */ + { 0x27F7, 0x27F7, 0x0000, 1, 0x0004 }, /* R11 */ + { 0x01FF, 0x01FF, 0x0000, 1, 0x00C0 }, /* R12 */ + { 0x01FF, 0x01FF, 0x0000, 1, 0x00C0 }, /* R13 */ + { 0x1FEF, 0x1FEF, 0x0000, 1, 0x0000 }, /* R14 */ + { 0x0163, 0x0163, 0x0000, 1, 0x0100 }, /* R15 */ + { 0x01FF, 0x01FF, 0x0000, 1, 0x00C0 }, /* R16 */ + { 0x01FF, 0x01FF, 0x0000, 1, 0x00C0 }, /* R17 */ + { 0x1FFF, 0x0FFF, 0x0000, 1, 0x0000 }, /* R18 */ + { 0xFFFF, 0xFFFF, 0x0000, 1, 0x1000 }, /* R19 */ + { 0xFFFF, 0xFFFF, 0x0000, 1, 0x1010 }, /* R20 */ + { 0xFFFF, 0xFFFF, 0x0000, 1, 0x1010 }, /* R21 */ + { 0x0FDD, 0x0FDD, 0x0000, 1, 0x8000 }, /* R22 */ + { 0x1FFF, 0x1FFF, 0x0000, 1, 0x0800 }, /* R23 */ + { 0x0000, 0x01DF, 0x0000, 1, 0x008B }, /* R24 */ + { 0x0000, 0x01DF, 0x0000, 1, 0x008B }, /* R25 */ + { 0x0000, 0x01DF, 0x0000, 1, 0x008B }, /* R26 */ + { 0x0000, 0x01DF, 0x0000, 1, 0x008B }, /* R27 */ + { 0x0000, 0x01FF, 0x0000, 1, 0x0000 }, /* R28 */ + { 0x0000, 0x01FF, 0x0000, 1, 0x0000 }, /* R29 */ + { 0x0000, 0x0077, 0x0000, 1, 0x0066 }, /* R30 */ + { 0x0000, 0x0033, 0x0000, 1, 0x0022 }, /* R31 */ + { 0x0000, 0x01FF, 0x0000, 1, 0x0079 }, /* R32 */ + { 0x0000, 0x01FF, 0x0000, 1, 0x0079 }, /* R33 */ + { 0x0000, 0x0003, 0x0000, 1, 0x0003 }, /* R34 */ + { 0x0000, 0x01FF, 0x0000, 1, 0x0003 }, /* R35 */ + { 0x0000, 0x0000, 0x0000, 0, 0x0000 }, /* R36 */ + { 0x0000, 0x003F, 0x0000, 1, 0x0100 }, /* R37 */ + { 0x0000, 0x0000, 0x0000, 0, 0x0000 }, /* R38 */ + { 0x0000, 0x000F, 0x0000, 0, 0x0000 }, /* R39 */ + { 0x0000, 0x00FF, 0x0000, 1, 0x0000 }, /* R40 */ + { 0x0000, 0x01B7, 0x0000, 1, 0x0000 }, /* R41 */ + { 0x0000, 0x01B7, 0x0000, 1, 0x0000 }, /* R42 */ + { 0x0000, 0x01FF, 0x0000, 1, 0x0000 }, /* R43 */ + { 0x0000, 0x01FF, 0x0000, 1, 0x0000 }, /* R44 */ + { 0x0000, 0x00FD, 0x0000, 1, 0x0000 }, /* R45 */ + { 0x0000, 0x00FD, 0x0000, 1, 0x0000 }, /* R46 */ + { 0x0000, 0x01FF, 0x0000, 1, 0x0000 }, /* R47 */ + { 0x0000, 0x01FF, 0x0000, 1, 0x0000 }, /* R48 */ + { 0x0000, 0x01FF, 0x0000, 1, 0x0000 }, /* R49 */ + { 0x0000, 0x01FF, 0x0000, 1, 0x0000 }, /* R50 */ + { 0x0000, 0x01B3, 0x0000, 1, 0x0180 }, /* R51 */ + { 0x0000, 0x0077, 0x0000, 1, 0x0000 }, /* R52 */ + { 0x0000, 0x0077, 0x0000, 1, 0x0000 }, /* R53 */ + { 0x0000, 0x00FF, 0x0000, 1, 0x0000 }, /* R54 */ + { 0x0000, 0x0001, 0x0000, 1, 0x0000 }, /* R55 */ + { 0x0000, 0x003F, 0x0000, 1, 0x0000 }, /* R56 */ + { 0x0000, 0x004F, 0x0000, 1, 0x0000 }, /* R57 */ + { 0x0000, 0x00FD, 0x0000, 1, 0x0000 }, /* R58 */ + { 0x0000, 0x0000, 0x0000, 0, 0x0000 }, /* R59 */ + { 0x1FFF, 0x1FFF, 0x0000, 1, 0x0000 }, /* R60 */ + { 0xFFFF, 0xFFFF, 0x0000, 1, 0x0000 }, /* R61 */ + { 0x03FF, 0x03FF, 0x0000, 1, 0x0000 }, /* R62 */ + { 0x007F, 0x007F, 0x0000, 1, 0x0000 }, /* R63 */ + { 0x0000, 0x0000, 0x0000, 0, 0x0000 }, /* R64 */ + { 0xDFFF, 0xDFFF, 0x0000, 0, 0x0000 }, /* R65 */ + { 0xDFFF, 0xDFFF, 0x0000, 0, 0x0000 }, /* R66 */ + { 0xDFFF, 0xDFFF, 0x0000, 0, 0x0000 }, /* R67 */ + { 0xDFFF, 0xDFFF, 0x0000, 0, 0x0000 }, /* R68 */ + { 0x0000, 0x0000, 0x0000, 0, 0x0000 }, /* R69 */ + { 0xFFFF, 0xFFFF, 0x0000, 0, 0x4400 }, /* R70 */ + { 0x23FF, 0x23FF, 0x0000, 0, 0x0000 }, /* R71 */ + { 0xFFFF, 0xFFFF, 0x0000, 0, 0x4400 }, /* R72 */ + { 0x23FF, 0x23FF, 0x0000, 0, 0x0000 }, /* R73 */ + { 0x0000, 0x0000, 0x0000, 0, 0x0000 }, /* R74 */ + { 0x000E, 0x000E, 0x0000, 0, 0x0008 }, /* R75 */ + { 0xE00F, 0xE00F, 0x0000, 0, 0x0000 }, /* R76 */ + { 0x0000, 0x0000, 0x0000, 0, 0x0000 }, /* R77 */ + { 0x03C0, 0x03C0, 0x0000, 0, 0x02C0 }, /* R78 */ + { 0xFFFF, 0x0000, 0xffff, 0, 0x0000 }, /* R79 */ + { 0xFFFF, 0xFFFF, 0x0000, 0, 0x0000 }, /* R80 */ + { 0xFFFF, 0x0000, 0xffff, 0, 0x0000 }, /* R81 */ + { 0x2BFF, 0x0000, 0xffff, 0, 0x0000 }, /* R82 */ + { 0x0000, 0x0000, 0x0000, 0, 0x0000 }, /* R83 */ + { 0x80FF, 0x80FF, 0x0000, 0, 0x00ff }, /* R84 */ +}; + +static int wm8400_read(struct wm8400 *wm8400, u8 reg, int num_regs, u16 *dest) +{ + int i, ret = 0; + + BUG_ON(reg + num_regs - 1 > ARRAY_SIZE(wm8400->reg_cache)); + + /* If there are any volatile reads then read back the entire block */ + for (i = reg; i < reg + num_regs; i++) + if (reg_data[i].vol) { + ret = wm8400->read_dev(wm8400->io_data, reg, + num_regs, dest); + if (ret != 0) + return ret; + for (i = 0; i < num_regs; i++) + dest[i] = be16_to_cpu(dest[i]); + + return 0; + } + + /* Otherwise use the cache */ + memcpy(dest, &wm8400->reg_cache[reg], num_regs * sizeof(u16)); + + return 0; +} + +static int wm8400_write(struct wm8400 *wm8400, u8 reg, int num_regs, + u16 *src) +{ + int ret, i; + + BUG_ON(reg + num_regs - 1 > ARRAY_SIZE(wm8400->reg_cache)); + + for (i = 0; i < num_regs; i++) { + BUG_ON(!reg_data[reg + i].writable); + wm8400->reg_cache[reg + i] = src[i]; + src[i] = cpu_to_be16(src[i]); + } + + /* Do the actual I/O */ + ret = wm8400->write_dev(wm8400->io_data, reg, num_regs, src); + if (ret != 0) + return -EIO; + + return 0; +} + +/** + * wm8400_reg_read - Single register read + * + * @wm8400: Pointer to wm8400 control structure + * @reg: Register to read + * + * @return Read value + */ +u16 wm8400_reg_read(struct wm8400 *wm8400, u8 reg) +{ + u16 val; + + mutex_lock(&wm8400->io_lock); + + wm8400_read(wm8400, reg, 1, &val); + + mutex_unlock(&wm8400->io_lock); + + return val; +} +EXPORT_SYMBOL_GPL(wm8400_reg_read); + +int wm8400_block_read(struct wm8400 *wm8400, u8 reg, int count, u16 *data) +{ + int ret; + + mutex_lock(&wm8400->io_lock); + + ret = wm8400_read(wm8400, reg, count, data); + + mutex_unlock(&wm8400->io_lock); + + return ret; +} +EXPORT_SYMBOL_GPL(wm8400_block_read); + +/** + * wm8400_set_bits - Bitmask write + * + * @wm8400: Pointer to wm8400 control structure + * @reg: Register to access + * @mask: Mask of bits to change + * @val: Value to set for masked bits + */ +int wm8400_set_bits(struct wm8400 *wm8400, u8 reg, u16 mask, u16 val) +{ + u16 tmp; + int ret; + + mutex_lock(&wm8400->io_lock); + + ret = wm8400_read(wm8400, reg, 1, &tmp); + tmp = (tmp & ~mask) | val; + if (ret == 0) + ret = wm8400_write(wm8400, reg, 1, &tmp); + + mutex_unlock(&wm8400->io_lock); + + return ret; +} +EXPORT_SYMBOL_GPL(wm8400_set_bits); + +/** + * wm8400_reset_codec_reg_cache - Reset cached codec registers to + * their default values. + */ +void wm8400_reset_codec_reg_cache(struct wm8400 *wm8400) +{ + int i; + + mutex_lock(&wm8400->io_lock); + + /* Reset all codec registers to their initial value */ + for (i = 0; i < ARRAY_SIZE(wm8400->reg_cache); i++) + if (reg_data[i].is_codec) + wm8400->reg_cache[i] = reg_data[i].default_val; + + mutex_unlock(&wm8400->io_lock); +} +EXPORT_SYMBOL_GPL(wm8400_reset_codec_reg_cache); + +/* + * wm8400_init - Generic initialisation + * + * The WM8400 can be configured as either an I2C or SPI device. Probe + * functions for each bus set up the accessors then call into this to + * set up the device itself. + */ +static int wm8400_init(struct wm8400 *wm8400, + struct wm8400_platform_data *pdata) +{ + u16 reg; + int ret, i; + + mutex_init(&wm8400->io_lock); + + wm8400->dev->driver_data = wm8400; + + /* Check that this is actually a WM8400 */ + ret = wm8400->read_dev(wm8400->io_data, WM8400_RESET_ID, 1, ®); + if (ret != 0) { + dev_err(wm8400->dev, "Chip ID register read failed\n"); + return -EIO; + } + if (be16_to_cpu(reg) != reg_data[WM8400_RESET_ID].default_val) { + dev_err(wm8400->dev, "Device is not a WM8400, ID is %x\n", + be16_to_cpu(reg)); + return -ENODEV; + } + + /* We don't know what state the hardware is in and since this + * is a PMIC we can't reset it safely so initialise the register + * cache from the hardware. + */ + ret = wm8400->read_dev(wm8400->io_data, 0, + ARRAY_SIZE(wm8400->reg_cache), + wm8400->reg_cache); + if (ret != 0) { + dev_err(wm8400->dev, "Register cache read failed\n"); + return -EIO; + } + for (i = 0; i < ARRAY_SIZE(wm8400->reg_cache); i++) + wm8400->reg_cache[i] = be16_to_cpu(wm8400->reg_cache[i]); + + /* If the codec is in reset use hard coded values */ + if (!(wm8400->reg_cache[WM8400_POWER_MANAGEMENT_1] & WM8400_CODEC_ENA)) + for (i = 0; i < ARRAY_SIZE(wm8400->reg_cache); i++) + if (reg_data[i].is_codec) + wm8400->reg_cache[i] = reg_data[i].default_val; + + ret = wm8400_read(wm8400, WM8400_ID, 1, ®); + if (ret != 0) { + dev_err(wm8400->dev, "ID register read failed: %d\n", ret); + return ret; + } + reg = (reg & WM8400_CHIP_REV_MASK) >> WM8400_CHIP_REV_SHIFT; + dev_info(wm8400->dev, "WM8400 revision %x\n", reg); + + if (pdata && pdata->platform_init) { + ret = pdata->platform_init(wm8400->dev); + if (ret != 0) + dev_err(wm8400->dev, "Platform init failed: %d\n", + ret); + } else + dev_warn(wm8400->dev, "No platform initialisation supplied\n"); + + return ret; +} + +static void wm8400_release(struct wm8400 *wm8400) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(wm8400->regulators); i++) + if (wm8400->regulators[i].name) + platform_device_unregister(&wm8400->regulators[i]); +} + +#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) +static int wm8400_i2c_read(void *io_data, char reg, int count, u16 *dest) +{ + struct i2c_client *i2c = io_data; + struct i2c_msg xfer[2]; + int ret; + + /* Write register */ + xfer[0].addr = i2c->addr; + xfer[0].flags = 0; + xfer[0].len = 1; + xfer[0].buf = ® + + /* Read data */ + xfer[1].addr = i2c->addr; + xfer[1].flags = I2C_M_RD; + xfer[1].len = count * sizeof(u16); + xfer[1].buf = (u8 *)dest; + + ret = i2c_transfer(i2c->adapter, xfer, 2); + if (ret == 2) + ret = 0; + else if (ret >= 0) + ret = -EIO; + + return ret; +} + +static int wm8400_i2c_write(void *io_data, char reg, int count, const u16 *src) +{ + struct i2c_client *i2c = io_data; + u8 *msg; + int ret; + + /* We add 1 byte for device register - ideally I2C would gather. */ + msg = kmalloc((count * sizeof(u16)) + 1, GFP_KERNEL); + if (msg == NULL) + return -ENOMEM; + + msg[0] = reg; + memcpy(&msg[1], src, count * sizeof(u16)); + + ret = i2c_master_send(i2c, msg, (count * sizeof(u16)) + 1); + + if (ret == (count * 2) + 1) + ret = 0; + else if (ret >= 0) + ret = -EIO; + + kfree(msg); + + return ret; +} + +static int wm8400_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct wm8400 *wm8400; + int ret; + + wm8400 = kzalloc(sizeof(struct wm8400), GFP_KERNEL); + if (wm8400 == NULL) { + ret = -ENOMEM; + goto err; + } + + wm8400->io_data = i2c; + wm8400->read_dev = wm8400_i2c_read; + wm8400->write_dev = wm8400_i2c_write; + wm8400->dev = &i2c->dev; + i2c_set_clientdata(i2c, wm8400); + + ret = wm8400_init(wm8400, i2c->dev.platform_data); + if (ret != 0) + goto struct_err; + + return 0; + +struct_err: + i2c_set_clientdata(i2c, NULL); + kfree(wm8400); +err: + return ret; +} + +static int wm8400_i2c_remove(struct i2c_client *i2c) +{ + struct wm8400 *wm8400 = i2c_get_clientdata(i2c); + + wm8400_release(wm8400); + i2c_set_clientdata(i2c, NULL); + kfree(wm8400); + + return 0; +} + +static const struct i2c_device_id wm8400_i2c_id[] = { + { "wm8400", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, wm8400_i2c_id); + +static struct i2c_driver wm8400_i2c_driver = { + .driver = { + .name = "WM8400", + .owner = THIS_MODULE, + }, + .probe = wm8400_i2c_probe, + .remove = wm8400_i2c_remove, + .id_table = wm8400_i2c_id, +}; +#endif + +static int __init wm8400_module_init(void) +{ + int ret = -ENODEV; + +#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) + ret = i2c_add_driver(&wm8400_i2c_driver); + if (ret != 0) + pr_err("Failed to register I2C driver: %d\n", ret); +#endif + + return ret; +} +module_init(wm8400_module_init); + +static void __exit wm8400_module_exit(void) +{ +#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) + i2c_del_driver(&wm8400_i2c_driver); +#endif +} +module_exit(wm8400_module_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index a656128f1fd..4dada6ee111 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -56,4 +56,28 @@ config REGULATOR_BQ24022 charging select between 100 mA and 500 mA charging current limit. +config REGULATOR_WM8350 + tristate "Wolfson Microelectroncis WM8350 AudioPlus PMIC" + depends on MFD_WM8350 + select REGULATOR + help + This driver provides support for the voltage and current regulators + of the WM8350 AudioPlus PMIC. + +config REGULATOR_WM8400 + tristate "Wolfson Microelectroncis WM8400 AudioPlus PMIC" + depends on MFD_WM8400 + select REGULATOR + help + This driver provides support for the voltage regulators of the + WM8400 AudioPlus PMIC. + +config REGULATOR_DA903X + tristate "Support regulators on Dialog Semiconductor DA9030/DA9034 PMIC" + depends on PMIC_DA903X + select REGULATOR + help + Say y here to support the BUCKs and LDOs regulators found on + Dialog Semiconductor DA9030/DA9034 PMIC. + endmenu diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index ac2c64efe65..254d40c02ee 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -8,5 +8,8 @@ obj-$(CONFIG_REGULATOR_FIXED_VOLTAGE) += fixed.o obj-$(CONFIG_REGULATOR_VIRTUAL_CONSUMER) += virtual.o obj-$(CONFIG_REGULATOR_BQ24022) += bq24022.o +obj-$(CONFIG_REGULATOR_WM8350) += wm8350-regulator.o +obj-$(CONFIG_REGULATOR_WM8400) += wm8400-regulator.o +obj-$(CONFIG_REGULATOR_DA903X) += da903x.o ccflags-$(CONFIG_REGULATOR_DEBUG) += -DDEBUG diff --git a/drivers/regulator/bq24022.c b/drivers/regulator/bq24022.c index 263699d6152..366565aba86 100644 --- a/drivers/regulator/bq24022.c +++ b/drivers/regulator/bq24022.c @@ -18,13 +18,13 @@ #include <linux/regulator/bq24022.h> #include <linux/regulator/driver.h> + static int bq24022_set_current_limit(struct regulator_dev *rdev, int min_uA, int max_uA) { - struct platform_device *pdev = rdev_get_drvdata(rdev); - struct bq24022_mach_info *pdata = pdev->dev.platform_data; + struct bq24022_mach_info *pdata = rdev_get_drvdata(rdev); - dev_dbg(&pdev->dev, "setting current limit to %s mA\n", + dev_dbg(rdev_get_dev(rdev), "setting current limit to %s mA\n", max_uA >= 500000 ? "500" : "100"); /* REVISIT: maybe return error if min_uA != 0 ? */ @@ -34,18 +34,16 @@ static int bq24022_set_current_limit(struct regulator_dev *rdev, static int bq24022_get_current_limit(struct regulator_dev *rdev) { - struct platform_device *pdev = rdev_get_drvdata(rdev); - struct bq24022_mach_info *pdata = pdev->dev.platform_data; + struct bq24022_mach_info *pdata = rdev_get_drvdata(rdev); return gpio_get_value(pdata->gpio_iset2) ? 500000 : 100000; } static int bq24022_enable(struct regulator_dev *rdev) { - struct platform_device *pdev = rdev_get_drvdata(rdev); - struct bq24022_mach_info *pdata = pdev->dev.platform_data; + struct bq24022_mach_info *pdata = rdev_get_drvdata(rdev); - dev_dbg(&pdev->dev, "enabling charger\n"); + dev_dbg(rdev_get_dev(rdev), "enabling charger\n"); gpio_set_value(pdata->gpio_nce, 0); return 0; @@ -53,10 +51,9 @@ static int bq24022_enable(struct regulator_dev *rdev) static int bq24022_disable(struct regulator_dev *rdev) { - struct platform_device *pdev = rdev_get_drvdata(rdev); - struct bq24022_mach_info *pdata = pdev->dev.platform_data; + struct bq24022_mach_info *pdata = rdev_get_drvdata(rdev); - dev_dbg(&pdev->dev, "disabling charger\n"); + dev_dbg(rdev_get_dev(rdev), "disabling charger\n"); gpio_set_value(pdata->gpio_nce, 1); return 0; @@ -108,7 +105,7 @@ static int __init bq24022_probe(struct platform_device *pdev) ret = gpio_direction_output(pdata->gpio_iset2, 0); ret = gpio_direction_output(pdata->gpio_nce, 1); - bq24022 = regulator_register(&bq24022_desc, pdev); + bq24022 = regulator_register(&bq24022_desc, &pdev->dev, pdata); if (IS_ERR(bq24022)) { dev_dbg(&pdev->dev, "couldn't register regulator\n"); ret = PTR_ERR(bq24022); diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 9c798626156..02a774424e8 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -2,8 +2,9 @@ * core.c -- Voltage/Current Regulator framework. * * Copyright 2007, 2008 Wolfson Microelectronics PLC. + * Copyright 2008 SlimLogic Ltd. * - * Author: Liam Girdwood <liam.girdwood@wolfsonmicro.com> + * Author: Liam Girdwood <lrg@slimlogic.co.uk> * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -64,14 +65,9 @@ struct regulator_map { struct list_head list; struct device *dev; const char *supply; - const char *regulator; + struct regulator_dev *regulator; }; -static inline struct regulator_dev *to_rdev(struct device *d) -{ - return container_of(d, struct regulator_dev, dev); -} - /* * struct regulator * @@ -227,7 +223,7 @@ static ssize_t device_requested_uA_show(struct device *dev, static ssize_t regulator_uV_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct regulator_dev *rdev = to_rdev(dev); + struct regulator_dev *rdev = dev_get_drvdata(dev); ssize_t ret; mutex_lock(&rdev->mutex); @@ -240,15 +236,31 @@ static ssize_t regulator_uV_show(struct device *dev, static ssize_t regulator_uA_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct regulator_dev *rdev = to_rdev(dev); + struct regulator_dev *rdev = dev_get_drvdata(dev); return sprintf(buf, "%d\n", _regulator_get_current_limit(rdev)); } +static ssize_t regulator_name_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct regulator_dev *rdev = dev_get_drvdata(dev); + const char *name; + + if (rdev->constraints->name) + name = rdev->constraints->name; + else if (rdev->desc->name) + name = rdev->desc->name; + else + name = ""; + + return sprintf(buf, "%s\n", name); +} + static ssize_t regulator_opmode_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct regulator_dev *rdev = to_rdev(dev); + struct regulator_dev *rdev = dev_get_drvdata(dev); int mode = _regulator_get_mode(rdev); switch (mode) { @@ -267,7 +279,7 @@ static ssize_t regulator_opmode_show(struct device *dev, static ssize_t regulator_state_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct regulator_dev *rdev = to_rdev(dev); + struct regulator_dev *rdev = dev_get_drvdata(dev); int state = _regulator_is_enabled(rdev); if (state > 0) @@ -281,7 +293,7 @@ static ssize_t regulator_state_show(struct device *dev, static ssize_t regulator_min_uA_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct regulator_dev *rdev = to_rdev(dev); + struct regulator_dev *rdev = dev_get_drvdata(dev); if (!rdev->constraints) return sprintf(buf, "constraint not defined\n"); @@ -292,7 +304,7 @@ static ssize_t regulator_min_uA_show(struct device *dev, static ssize_t regulator_max_uA_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct regulator_dev *rdev = to_rdev(dev); + struct regulator_dev *rdev = dev_get_drvdata(dev); if (!rdev->constraints) return sprintf(buf, "constraint not defined\n"); @@ -303,7 +315,7 @@ static ssize_t regulator_max_uA_show(struct device *dev, static ssize_t regulator_min_uV_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct regulator_dev *rdev = to_rdev(dev); + struct regulator_dev *rdev = dev_get_drvdata(dev); if (!rdev->constraints) return sprintf(buf, "constraint not defined\n"); @@ -314,7 +326,7 @@ static ssize_t regulator_min_uV_show(struct device *dev, static ssize_t regulator_max_uV_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct regulator_dev *rdev = to_rdev(dev); + struct regulator_dev *rdev = dev_get_drvdata(dev); if (!rdev->constraints) return sprintf(buf, "constraint not defined\n"); @@ -325,7 +337,7 @@ static ssize_t regulator_max_uV_show(struct device *dev, static ssize_t regulator_total_uA_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct regulator_dev *rdev = to_rdev(dev); + struct regulator_dev *rdev = dev_get_drvdata(dev); struct regulator *regulator; int uA = 0; @@ -339,14 +351,14 @@ static ssize_t regulator_total_uA_show(struct device *dev, static ssize_t regulator_num_users_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct regulator_dev *rdev = to_rdev(dev); + struct regulator_dev *rdev = dev_get_drvdata(dev); return sprintf(buf, "%d\n", rdev->use_count); } static ssize_t regulator_type_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct regulator_dev *rdev = to_rdev(dev); + struct regulator_dev *rdev = dev_get_drvdata(dev); switch (rdev->desc->type) { case REGULATOR_VOLTAGE: @@ -360,7 +372,7 @@ static ssize_t regulator_type_show(struct device *dev, static ssize_t regulator_suspend_mem_uV_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct regulator_dev *rdev = to_rdev(dev); + struct regulator_dev *rdev = dev_get_drvdata(dev); if (!rdev->constraints) return sprintf(buf, "not defined\n"); @@ -370,7 +382,7 @@ static ssize_t regulator_suspend_mem_uV_show(struct device *dev, static ssize_t regulator_suspend_disk_uV_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct regulator_dev *rdev = to_rdev(dev); + struct regulator_dev *rdev = dev_get_drvdata(dev); if (!rdev->constraints) return sprintf(buf, "not defined\n"); @@ -380,7 +392,7 @@ static ssize_t regulator_suspend_disk_uV_show(struct device *dev, static ssize_t regulator_suspend_standby_uV_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct regulator_dev *rdev = to_rdev(dev); + struct regulator_dev *rdev = dev_get_drvdata(dev); if (!rdev->constraints) return sprintf(buf, "not defined\n"); @@ -406,7 +418,7 @@ static ssize_t suspend_opmode_show(struct regulator_dev *rdev, static ssize_t regulator_suspend_mem_mode_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct regulator_dev *rdev = to_rdev(dev); + struct regulator_dev *rdev = dev_get_drvdata(dev); if (!rdev->constraints) return sprintf(buf, "not defined\n"); @@ -417,7 +429,7 @@ static ssize_t regulator_suspend_mem_mode_show(struct device *dev, static ssize_t regulator_suspend_disk_mode_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct regulator_dev *rdev = to_rdev(dev); + struct regulator_dev *rdev = dev_get_drvdata(dev); if (!rdev->constraints) return sprintf(buf, "not defined\n"); @@ -428,7 +440,7 @@ static ssize_t regulator_suspend_disk_mode_show(struct device *dev, static ssize_t regulator_suspend_standby_mode_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct regulator_dev *rdev = to_rdev(dev); + struct regulator_dev *rdev = dev_get_drvdata(dev); if (!rdev->constraints) return sprintf(buf, "not defined\n"); @@ -439,7 +451,7 @@ static ssize_t regulator_suspend_standby_mode_show(struct device *dev, static ssize_t regulator_suspend_mem_state_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct regulator_dev *rdev = to_rdev(dev); + struct regulator_dev *rdev = dev_get_drvdata(dev); if (!rdev->constraints) return sprintf(buf, "not defined\n"); @@ -453,7 +465,7 @@ static ssize_t regulator_suspend_mem_state_show(struct device *dev, static ssize_t regulator_suspend_disk_state_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct regulator_dev *rdev = to_rdev(dev); + struct regulator_dev *rdev = dev_get_drvdata(dev); if (!rdev->constraints) return sprintf(buf, "not defined\n"); @@ -467,7 +479,7 @@ static ssize_t regulator_suspend_disk_state_show(struct device *dev, static ssize_t regulator_suspend_standby_state_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct regulator_dev *rdev = to_rdev(dev); + struct regulator_dev *rdev = dev_get_drvdata(dev); if (!rdev->constraints) return sprintf(buf, "not defined\n"); @@ -477,7 +489,9 @@ static ssize_t regulator_suspend_standby_state_show(struct device *dev, else return sprintf(buf, "disabled\n"); } + static struct device_attribute regulator_dev_attrs[] = { + __ATTR(name, 0444, regulator_name_show, NULL), __ATTR(microvolts, 0444, regulator_uV_show, NULL), __ATTR(microamps, 0444, regulator_uA_show, NULL), __ATTR(opmode, 0444, regulator_opmode_show, NULL), @@ -512,7 +526,7 @@ static struct device_attribute regulator_dev_attrs[] = { static void regulator_dev_release(struct device *dev) { - struct regulator_dev *rdev = to_rdev(dev); + struct regulator_dev *rdev = dev_get_drvdata(dev); kfree(rdev); } @@ -569,8 +583,11 @@ static int suspend_set_state(struct regulator_dev *rdev, /* enable & disable are mandatory for suspend control */ if (!rdev->desc->ops->set_suspend_enable || - !rdev->desc->ops->set_suspend_disable) + !rdev->desc->ops->set_suspend_disable) { + printk(KERN_ERR "%s: no way to set suspend state\n", + __func__); return -EINVAL; + } if (rstate->enabled) ret = rdev->desc->ops->set_suspend_enable(rdev); @@ -656,6 +673,155 @@ static void print_constraints(struct regulator_dev *rdev) printk(KERN_INFO "regulator: %s: %s\n", rdev->desc->name, buf); } +/** + * set_machine_constraints - sets regulator constraints + * @regulator: regulator source + * + * Allows platform initialisation code to define and constrain + * regulator circuits e.g. valid voltage/current ranges, etc. NOTE: + * Constraints *must* be set by platform code in order for some + * regulator operations to proceed i.e. set_voltage, set_current_limit, + * set_mode. + */ +static int set_machine_constraints(struct regulator_dev *rdev, + struct regulation_constraints *constraints) +{ + int ret = 0; + const char *name; + struct regulator_ops *ops = rdev->desc->ops; + + if (constraints->name) + name = constraints->name; + else if (rdev->desc->name) + name = rdev->desc->name; + else + name = "regulator"; + + rdev->constraints = constraints; + + /* do we need to apply the constraint voltage */ + if (rdev->constraints->apply_uV && + rdev->constraints->min_uV == rdev->constraints->max_uV && + ops->set_voltage) { + ret = ops->set_voltage(rdev, + rdev->constraints->min_uV, rdev->constraints->max_uV); + if (ret < 0) { + printk(KERN_ERR "%s: failed to apply %duV constraint to %s\n", + __func__, + rdev->constraints->min_uV, name); + rdev->constraints = NULL; + goto out; + } + } + + /* are we enabled at boot time by firmware / bootloader */ + if (rdev->constraints->boot_on) + rdev->use_count = 1; + + /* do we need to setup our suspend state */ + if (constraints->initial_state) { + ret = suspend_prepare(rdev, constraints->initial_state); + if (ret < 0) { + printk(KERN_ERR "%s: failed to set suspend state for %s\n", + __func__, name); + rdev->constraints = NULL; + goto out; + } + } + + /* if always_on is set then turn the regulator on if it's not + * already on. */ + if (constraints->always_on && ops->enable && + ((ops->is_enabled && !ops->is_enabled(rdev)) || + (!ops->is_enabled && !constraints->boot_on))) { + ret = ops->enable(rdev); + if (ret < 0) { + printk(KERN_ERR "%s: failed to enable %s\n", + __func__, name); + rdev->constraints = NULL; + goto out; + } + } + + print_constraints(rdev); +out: + return ret; +} + +/** + * set_supply - set regulator supply regulator + * @regulator: regulator name + * @supply: supply regulator name + * + * Called by platform initialisation code to set the supply regulator for this + * regulator. This ensures that a regulators supply will also be enabled by the + * core if it's child is enabled. + */ +static int set_supply(struct regulator_dev *rdev, + struct regulator_dev *supply_rdev) +{ + int err; + + err = sysfs_create_link(&rdev->dev.kobj, &supply_rdev->dev.kobj, + "supply"); + if (err) { + printk(KERN_ERR + "%s: could not add device link %s err %d\n", + __func__, supply_rdev->dev.kobj.name, err); + goto out; + } + rdev->supply = supply_rdev; + list_add(&rdev->slist, &supply_rdev->supply_list); +out: + return err; +} + +/** + * set_consumer_device_supply: Bind a regulator to a symbolic supply + * @regulator: regulator source + * @dev: device the supply applies to + * @supply: symbolic name for supply + * + * Allows platform initialisation code to map physical regulator + * sources to symbolic names for supplies for use by devices. Devices + * should use these symbolic names to request regulators, avoiding the + * need to provide board-specific regulator names as platform data. + */ +static int set_consumer_device_supply(struct regulator_dev *rdev, + struct device *consumer_dev, const char *supply) +{ + struct regulator_map *node; + + if (supply == NULL) + return -EINVAL; + + node = kmalloc(sizeof(struct regulator_map), GFP_KERNEL); + if (node == NULL) + return -ENOMEM; + + node->regulator = rdev; + node->dev = consumer_dev; + node->supply = supply; + + list_add(&node->list, ®ulator_map_list); + return 0; +} + +static void unset_consumer_device_supply(struct regulator_dev *rdev, + struct device *consumer_dev) +{ + struct regulator_map *node, *n; + + list_for_each_entry_safe(node, n, ®ulator_map_list, list) { + if (rdev == node->regulator && + consumer_dev == node->dev) { + list_del(&node->list); + kfree(node); + return; + } + } +} + #define REG_STR_SIZE 32 static struct regulator *create_regulator(struct regulator_dev *rdev, @@ -746,7 +912,6 @@ struct regulator *regulator_get(struct device *dev, const char *id) struct regulator_dev *rdev; struct regulator_map *map; struct regulator *regulator = ERR_PTR(-ENODEV); - const char *supply = id; if (id == NULL) { printk(KERN_ERR "regulator: get() with no identifier\n"); @@ -758,15 +923,9 @@ struct regulator *regulator_get(struct device *dev, const char *id) list_for_each_entry(map, ®ulator_map_list, list) { if (dev == map->dev && strcmp(map->supply, id) == 0) { - supply = map->regulator; - break; - } - } - - list_for_each_entry(rdev, ®ulator_list, list) { - if (strcmp(supply, rdev->desc->name) == 0 && - try_module_get(rdev->owner)) + rdev = map->regulator; goto found; + } } printk(KERN_ERR "regulator: Unable to get requested regulator: %s\n", id); @@ -774,12 +933,16 @@ struct regulator *regulator_get(struct device *dev, const char *id) return regulator; found: + if (!try_module_get(rdev->owner)) + goto out; + regulator = create_regulator(rdev, dev, id); if (regulator == NULL) { regulator = ERR_PTR(-ENOMEM); module_put(rdev->owner); } +out: mutex_unlock(®ulator_list_mutex); return regulator; } @@ -1559,11 +1722,12 @@ EXPORT_SYMBOL_GPL(regulator_notifier_call_chain); * Returns 0 on success. */ struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc, - void *reg_data) + struct device *dev, void *driver_data) { static atomic_t regulator_no = ATOMIC_INIT(0); struct regulator_dev *rdev; - int ret; + struct regulator_init_data *init_data = dev->platform_data; + int ret, i; if (regulator_desc == NULL) return ERR_PTR(-EINVAL); @@ -1575,6 +1739,9 @@ struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc, !regulator_desc->type == REGULATOR_CURRENT) return ERR_PTR(-EINVAL); + if (!init_data) + return ERR_PTR(-EINVAL); + rdev = kzalloc(sizeof(struct regulator_dev), GFP_KERNEL); if (rdev == NULL) return ERR_PTR(-ENOMEM); @@ -1582,7 +1749,7 @@ struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc, mutex_lock(®ulator_list_mutex); mutex_init(&rdev->mutex); - rdev->reg_data = reg_data; + rdev->reg_data = driver_data; rdev->owner = regulator_desc->owner; rdev->desc = regulator_desc; INIT_LIST_HEAD(&rdev->consumer_list); @@ -1591,20 +1758,68 @@ struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc, INIT_LIST_HEAD(&rdev->slist); BLOCKING_INIT_NOTIFIER_HEAD(&rdev->notifier); + /* preform any regulator specific init */ + if (init_data->regulator_init) { + ret = init_data->regulator_init(rdev->reg_data); + if (ret < 0) { + kfree(rdev); + rdev = ERR_PTR(ret); + goto out; + } + } + + /* set regulator constraints */ + ret = set_machine_constraints(rdev, &init_data->constraints); + if (ret < 0) { + kfree(rdev); + rdev = ERR_PTR(ret); + goto out; + } + + /* register with sysfs */ rdev->dev.class = ®ulator_class; - device_initialize(&rdev->dev); + rdev->dev.parent = dev; snprintf(rdev->dev.bus_id, sizeof(rdev->dev.bus_id), - "regulator_%ld_%s", - (unsigned long)atomic_inc_return(®ulator_no) - 1, - regulator_desc->name); - - ret = device_add(&rdev->dev); - if (ret == 0) - list_add(&rdev->list, ®ulator_list); - else { + "regulator.%d", atomic_inc_return(®ulator_no) - 1); + ret = device_register(&rdev->dev); + if (ret != 0) { kfree(rdev); rdev = ERR_PTR(ret); + goto out; + } + + dev_set_drvdata(&rdev->dev, rdev); + + /* set supply regulator if it exists */ + if (init_data->supply_regulator_dev) { + ret = set_supply(rdev, + dev_get_drvdata(init_data->supply_regulator_dev)); + if (ret < 0) { + device_unregister(&rdev->dev); + kfree(rdev); + rdev = ERR_PTR(ret); + goto out; + } } + + /* add consumers devices */ + for (i = 0; i < init_data->num_consumer_supplies; i++) { + ret = set_consumer_device_supply(rdev, + init_data->consumer_supplies[i].dev, + init_data->consumer_supplies[i].supply); + if (ret < 0) { + for (--i; i >= 0; i--) + unset_consumer_device_supply(rdev, + init_data->consumer_supplies[i].dev); + device_unregister(&rdev->dev); + kfree(rdev); + rdev = ERR_PTR(ret); + goto out; + } + } + + list_add(&rdev->list, ®ulator_list); +out: mutex_unlock(®ulator_list_mutex); return rdev; } @@ -1631,187 +1846,6 @@ void regulator_unregister(struct regulator_dev *rdev) EXPORT_SYMBOL_GPL(regulator_unregister); /** - * regulator_set_supply - set regulator supply regulator - * @regulator: regulator name - * @supply: supply regulator name - * - * Called by platform initialisation code to set the supply regulator for this - * regulator. This ensures that a regulators supply will also be enabled by the - * core if it's child is enabled. - */ -int regulator_set_supply(const char *regulator, const char *supply) -{ - struct regulator_dev *rdev, *supply_rdev; - int err; - - if (regulator == NULL || supply == NULL) - return -EINVAL; - - mutex_lock(®ulator_list_mutex); - - list_for_each_entry(rdev, ®ulator_list, list) { - if (!strcmp(rdev->desc->name, regulator)) - goto found_regulator; - } - mutex_unlock(®ulator_list_mutex); - return -ENODEV; - -found_regulator: - list_for_each_entry(supply_rdev, ®ulator_list, list) { - if (!strcmp(supply_rdev->desc->name, supply)) - goto found_supply; - } - mutex_unlock(®ulator_list_mutex); - return -ENODEV; - -found_supply: - err = sysfs_create_link(&rdev->dev.kobj, &supply_rdev->dev.kobj, - "supply"); - if (err) { - printk(KERN_ERR - "%s: could not add device link %s err %d\n", - __func__, supply_rdev->dev.kobj.name, err); - goto out; - } - rdev->supply = supply_rdev; - list_add(&rdev->slist, &supply_rdev->supply_list); -out: - mutex_unlock(®ulator_list_mutex); - return err; -} -EXPORT_SYMBOL_GPL(regulator_set_supply); - -/** - * regulator_get_supply - get regulator supply regulator - * @regulator: regulator name - * - * Returns the supply supply regulator name or NULL if no supply regulator - * exists (i.e the regulator is supplied directly from USB, Line, Battery, etc) - */ -const char *regulator_get_supply(const char *regulator) -{ - struct regulator_dev *rdev; - - if (regulator == NULL) - return NULL; - - mutex_lock(®ulator_list_mutex); - list_for_each_entry(rdev, ®ulator_list, list) { - if (!strcmp(rdev->desc->name, regulator)) - goto found; - } - mutex_unlock(®ulator_list_mutex); - return NULL; - -found: - mutex_unlock(®ulator_list_mutex); - if (rdev->supply) - return rdev->supply->desc->name; - else - return NULL; -} -EXPORT_SYMBOL_GPL(regulator_get_supply); - -/** - * regulator_set_machine_constraints - sets regulator constraints - * @regulator: regulator source - * - * Allows platform initialisation code to define and constrain - * regulator circuits e.g. valid voltage/current ranges, etc. NOTE: - * Constraints *must* be set by platform code in order for some - * regulator operations to proceed i.e. set_voltage, set_current_limit, - * set_mode. - */ -int regulator_set_machine_constraints(const char *regulator_name, - struct regulation_constraints *constraints) -{ - struct regulator_dev *rdev; - int ret = 0; - - if (regulator_name == NULL) - return -EINVAL; - - mutex_lock(®ulator_list_mutex); - - list_for_each_entry(rdev, ®ulator_list, list) { - if (!strcmp(regulator_name, rdev->desc->name)) - goto found; - } - ret = -ENODEV; - goto out; - -found: - mutex_lock(&rdev->mutex); - rdev->constraints = constraints; - - /* do we need to apply the constraint voltage */ - if (rdev->constraints->apply_uV && - rdev->constraints->min_uV == rdev->constraints->max_uV && - rdev->desc->ops->set_voltage) { - ret = rdev->desc->ops->set_voltage(rdev, - rdev->constraints->min_uV, rdev->constraints->max_uV); - if (ret < 0) { - printk(KERN_ERR "%s: failed to apply %duV" - " constraint\n", __func__, - rdev->constraints->min_uV); - rdev->constraints = NULL; - goto out; - } - } - - /* are we enabled at boot time by firmware / bootloader */ - if (rdev->constraints->boot_on) - rdev->use_count = 1; - - /* do we need to setup our suspend state */ - if (constraints->initial_state) - ret = suspend_prepare(rdev, constraints->initial_state); - - print_constraints(rdev); - mutex_unlock(&rdev->mutex); - -out: - mutex_unlock(®ulator_list_mutex); - return ret; -} -EXPORT_SYMBOL_GPL(regulator_set_machine_constraints); - - -/** - * regulator_set_device_supply: Bind a regulator to a symbolic supply - * @regulator: regulator source - * @dev: device the supply applies to - * @supply: symbolic name for supply - * - * Allows platform initialisation code to map physical regulator - * sources to symbolic names for supplies for use by devices. Devices - * should use these symbolic names to request regulators, avoiding the - * need to provide board-specific regulator names as platform data. - */ -int regulator_set_device_supply(const char *regulator, struct device *dev, - const char *supply) -{ - struct regulator_map *node; - - if (regulator == NULL || supply == NULL) - return -EINVAL; - - node = kmalloc(sizeof(struct regulator_map), GFP_KERNEL); - if (node == NULL) - return -ENOMEM; - - node->regulator = regulator; - node->dev = dev; - node->supply = supply; - - mutex_lock(®ulator_list_mutex); - list_add(&node->list, ®ulator_map_list); - mutex_unlock(®ulator_list_mutex); - return 0; -} -EXPORT_SYMBOL_GPL(regulator_set_device_supply); - -/** * regulator_suspend_prepare: prepare regulators for system wide suspend * @state: system suspend state * @@ -1893,6 +1927,18 @@ int rdev_get_id(struct regulator_dev *rdev) } EXPORT_SYMBOL_GPL(rdev_get_id); +struct device *rdev_get_dev(struct regulator_dev *rdev) +{ + return &rdev->dev; +} +EXPORT_SYMBOL_GPL(rdev_get_dev); + +void *regulator_get_init_drvdata(struct regulator_init_data *reg_init_data) +{ + return reg_init_data->driver_data; +} +EXPORT_SYMBOL_GPL(regulator_get_init_drvdata); + static int __init regulator_init(void) { printk(KERN_INFO "regulator: core version %s\n", REGULATOR_VERSION); diff --git a/drivers/regulator/da903x.c b/drivers/regulator/da903x.c new file mode 100644 index 00000000000..3688e339db8 --- /dev/null +++ b/drivers/regulator/da903x.c @@ -0,0 +1,513 @@ +/* + * Regulators driver for Dialog Semiconductor DA903x + * + * Copyright (C) 2006-2008 Marvell International Ltd. + * Copyright (C) 2008 Compulab Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/err.h> +#include <linux/platform_device.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/machine.h> +#include <linux/mfd/da903x.h> + +/* DA9030 Registers */ +#define DA9030_INVAL (-1) +#define DA9030_LDO1011 (0x10) +#define DA9030_LDO15 (0x11) +#define DA9030_LDO1416 (0x12) +#define DA9030_LDO1819 (0x13) +#define DA9030_LDO17 (0x14) +#define DA9030_BUCK2DVM1 (0x15) +#define DA9030_BUCK2DVM2 (0x16) +#define DA9030_RCTL11 (0x17) +#define DA9030_RCTL21 (0x18) +#define DA9030_LDO1 (0x90) +#define DA9030_LDO23 (0x91) +#define DA9030_LDO45 (0x92) +#define DA9030_LDO6 (0x93) +#define DA9030_LDO78 (0x94) +#define DA9030_LDO912 (0x95) +#define DA9030_BUCK (0x96) +#define DA9030_RCTL12 (0x97) +#define DA9030_RCTL22 (0x98) +#define DA9030_LDO_UNLOCK (0xa0) +#define DA9030_LDO_UNLOCK_MASK (0xe0) +#define DA9034_OVER1 (0x10) + +/* DA9034 Registers */ +#define DA9034_INVAL (-1) +#define DA9034_OVER2 (0x11) +#define DA9034_OVER3 (0x12) +#define DA9034_LDO643 (0x13) +#define DA9034_LDO987 (0x14) +#define DA9034_LDO1110 (0x15) +#define DA9034_LDO1312 (0x16) +#define DA9034_LDO1514 (0x17) +#define DA9034_VCC1 (0x20) +#define DA9034_ADTV1 (0x23) +#define DA9034_ADTV2 (0x24) +#define DA9034_AVRC (0x25) +#define DA9034_CDTV1 (0x26) +#define DA9034_CDTV2 (0x27) +#define DA9034_CVRC (0x28) +#define DA9034_SDTV1 (0x29) +#define DA9034_SDTV2 (0x2a) +#define DA9034_SVRC (0x2b) +#define DA9034_MDTV1 (0x32) +#define DA9034_MDTV2 (0x33) +#define DA9034_MVRC (0x34) + +struct da903x_regulator_info { + struct regulator_desc desc; + + int min_uV; + int max_uV; + int step_uV; + int vol_reg; + int vol_shift; + int vol_nbits; + int update_reg; + int update_bit; + int enable_reg; + int enable_bit; +}; + +static inline int check_range(struct da903x_regulator_info *info, + int min_uV, int max_uV) +{ + if (min_uV < info->min_uV || min_uV > info->max_uV) + return -EINVAL; + + return 0; +} + +/* DA9030/DA9034 common operations */ +static int da903x_set_ldo_voltage(struct regulator_dev *rdev, + int min_uV, int max_uV) +{ + struct da903x_regulator_info *info = rdev_get_drvdata(rdev); + struct device *da9034_dev = rdev_get_dev(rdev)->parent; + uint8_t val, mask; + + if (check_range(info, min_uV, max_uV)) { + pr_err("invalid voltage range (%d, %d) uV", min_uV, max_uV); + return -EINVAL; + } + + val = (min_uV - info->min_uV + info->step_uV - 1) / info->step_uV; + val <<= info->vol_shift; + mask = ((1 << info->vol_nbits) - 1) << info->vol_shift; + + return da903x_update(da9034_dev, info->vol_reg, val, mask); +} + +static int da903x_get_voltage(struct regulator_dev *rdev) +{ + struct da903x_regulator_info *info = rdev_get_drvdata(rdev); + struct device *da9034_dev = rdev_get_dev(rdev)->parent; + uint8_t val, mask; + int ret; + + ret = da903x_read(da9034_dev, info->vol_reg, &val); + if (ret) + return ret; + + mask = ((1 << info->vol_nbits) - 1) << info->vol_shift; + val = (val & mask) >> info->vol_shift; + + return info->min_uV + info->step_uV * val; +} + +static int da903x_enable(struct regulator_dev *rdev) +{ + struct da903x_regulator_info *info = rdev_get_drvdata(rdev); + struct device *da9034_dev = rdev_get_dev(rdev)->parent; + + return da903x_set_bits(da9034_dev, info->enable_reg, + 1 << info->enable_bit); +} + +static int da903x_disable(struct regulator_dev *rdev) +{ + struct da903x_regulator_info *info = rdev_get_drvdata(rdev); + struct device *da9034_dev = rdev_get_dev(rdev)->parent; + + return da903x_clr_bits(da9034_dev, info->enable_reg, + 1 << info->enable_bit); +} + +static int da903x_is_enabled(struct regulator_dev *rdev) +{ + struct da903x_regulator_info *info = rdev_get_drvdata(rdev); + struct device *da9034_dev = rdev_get_dev(rdev)->parent; + uint8_t reg_val; + int ret; + + ret = da903x_read(da9034_dev, info->enable_reg, ®_val); + if (ret) + return ret; + + return reg_val & (1 << info->enable_bit); +} + +/* DA9030 specific operations */ +static int da9030_set_ldo1_15_voltage(struct regulator_dev *rdev, + int min_uV, int max_uV) +{ + struct da903x_regulator_info *info = rdev_get_drvdata(rdev); + struct device *da903x_dev = rdev_get_dev(rdev)->parent; + uint8_t val, mask; + int ret; + + if (check_range(info, min_uV, max_uV)) { + pr_err("invalid voltage range (%d, %d) uV", min_uV, max_uV); + return -EINVAL; + } + + val = (min_uV - info->min_uV + info->step_uV - 1) / info->step_uV; + val <<= info->vol_shift; + mask = ((1 << info->vol_nbits) - 1) << info->vol_shift; + val |= DA9030_LDO_UNLOCK; /* have to set UNLOCK bits */ + mask |= DA9030_LDO_UNLOCK_MASK; + + /* write twice */ + ret = da903x_update(da903x_dev, info->vol_reg, val, mask); + if (ret) + return ret; + + return da903x_update(da903x_dev, info->vol_reg, val, mask); +} + +static int da9030_set_ldo14_voltage(struct regulator_dev *rdev, + int min_uV, int max_uV) +{ + struct da903x_regulator_info *info = rdev_get_drvdata(rdev); + struct device *da903x_dev = rdev_get_dev(rdev)->parent; + uint8_t val, mask; + int thresh; + + if (check_range(info, min_uV, max_uV)) { + pr_err("invalid voltage range (%d, %d) uV", min_uV, max_uV); + return -EINVAL; + } + + thresh = (info->max_uV + info->min_uV) / 2; + if (min_uV < thresh) { + val = (thresh - min_uV + info->step_uV - 1) / info->step_uV; + val |= 0x4; + } else { + val = (min_uV - thresh + info->step_uV - 1) / info->step_uV; + } + + val <<= info->vol_shift; + mask = ((1 << info->vol_nbits) - 1) << info->vol_shift; + + return da903x_update(da903x_dev, info->vol_reg, val, mask); +} + +static int da9030_get_ldo14_voltage(struct regulator_dev *rdev) +{ + struct da903x_regulator_info *info = rdev_get_drvdata(rdev); + struct device *da903x_dev = rdev_get_dev(rdev)->parent; + uint8_t val, mask; + int ret; + + ret = da903x_read(da903x_dev, info->vol_reg, &val); + if (ret) + return ret; + + mask = ((1 << info->vol_nbits) - 1) << info->vol_shift; + val = (val & mask) >> info->vol_shift; + + if (val & 0x4) + return info->min_uV + info->step_uV * (3 - (val & ~0x4)); + else + return (info->max_uV + info->min_uV) / 2 + + info->step_uV * (val & ~0x4); +} + +/* DA9034 specific operations */ +static int da9034_set_dvc_voltage(struct regulator_dev *rdev, + int min_uV, int max_uV) +{ + struct da903x_regulator_info *info = rdev_get_drvdata(rdev); + struct device *da9034_dev = rdev_get_dev(rdev)->parent; + uint8_t val, mask; + int ret; + + if (check_range(info, min_uV, max_uV)) { + pr_err("invalid voltage range (%d, %d) uV", min_uV, max_uV); + return -EINVAL; + } + + val = (min_uV - info->min_uV + info->step_uV - 1) / info->step_uV; + val <<= info->vol_shift; + mask = ((1 << info->vol_nbits) - 1) << info->vol_shift; + + ret = da903x_update(da9034_dev, info->vol_reg, val, mask); + if (ret) + return ret; + + ret = da903x_set_bits(da9034_dev, info->update_reg, + 1 << info->update_bit); + return ret; +} + +static int da9034_set_ldo12_voltage(struct regulator_dev *rdev, + int min_uV, int max_uV) +{ + struct da903x_regulator_info *info = rdev_get_drvdata(rdev); + struct device *da9034_dev = rdev_get_dev(rdev)->parent; + uint8_t val, mask; + + if (check_range(info, min_uV, max_uV)) { + pr_err("invalid voltage range (%d, %d) uV", min_uV, max_uV); + return -EINVAL; + } + + val = (min_uV - info->min_uV + info->step_uV - 1) / info->step_uV; + val = (val > 7 || val < 20) ? 8 : val - 12; + val <<= info->vol_shift; + mask = ((1 << info->vol_nbits) - 1) << info->vol_shift; + + return da903x_update(da9034_dev, info->vol_reg, val, mask); +} + +static int da9034_get_ldo12_voltage(struct regulator_dev *rdev) +{ + struct da903x_regulator_info *info = rdev_get_drvdata(rdev); + struct device *da9034_dev = rdev_get_dev(rdev)->parent; + uint8_t val, mask; + int ret; + + ret = da903x_read(da9034_dev, info->vol_reg, &val); + if (ret) + return ret; + + mask = ((1 << info->vol_nbits) - 1) << info->vol_shift; + val = (val & mask) >> info->vol_shift; + + if (val >= 8) + return 2700000 + info->step_uV * (val - 8); + + return info->min_uV + info->step_uV * val; +} + +static struct regulator_ops da903x_regulator_ldo_ops = { + .set_voltage = da903x_set_ldo_voltage, + .get_voltage = da903x_get_voltage, + .enable = da903x_enable, + .disable = da903x_disable, + .is_enabled = da903x_is_enabled, +}; + +/* NOTE: this is dedicated for the insane DA9030 LDO14 */ +static struct regulator_ops da9030_regulator_ldo14_ops = { + .set_voltage = da9030_set_ldo14_voltage, + .get_voltage = da9030_get_ldo14_voltage, + .enable = da903x_enable, + .disable = da903x_disable, + .is_enabled = da903x_is_enabled, +}; + +/* NOTE: this is dedicated for the DA9030 LDO1 and LDO15 that have locks */ +static struct regulator_ops da9030_regulator_ldo1_15_ops = { + .set_voltage = da9030_set_ldo1_15_voltage, + .get_voltage = da903x_get_voltage, + .enable = da903x_enable, + .disable = da903x_disable, + .is_enabled = da903x_is_enabled, +}; + +static struct regulator_ops da9034_regulator_dvc_ops = { + .set_voltage = da9034_set_dvc_voltage, + .get_voltage = da903x_get_voltage, + .enable = da903x_enable, + .disable = da903x_disable, + .is_enabled = da903x_is_enabled, +}; + +/* NOTE: this is dedicated for the insane LDO12 */ +static struct regulator_ops da9034_regulator_ldo12_ops = { + .set_voltage = da9034_set_ldo12_voltage, + .get_voltage = da9034_get_ldo12_voltage, + .enable = da903x_enable, + .disable = da903x_disable, + .is_enabled = da903x_is_enabled, +}; + +#define DA903x_LDO(_pmic, _id, min, max, step, vreg, shift, nbits, ereg, ebit) \ +{ \ + .desc = { \ + .name = "LDO" #_id, \ + .ops = &da903x_regulator_ldo_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = _pmic##_ID_LDO##_id, \ + .owner = THIS_MODULE, \ + }, \ + .min_uV = (min) * 1000, \ + .max_uV = (max) * 1000, \ + .step_uV = (step) * 1000, \ + .vol_reg = _pmic##_##vreg, \ + .vol_shift = (shift), \ + .vol_nbits = (nbits), \ + .enable_reg = _pmic##_##ereg, \ + .enable_bit = (ebit), \ +} + +#define DA9034_DVC(_id, min, max, step, vreg, nbits, ureg, ubit, ereg, ebit) \ +{ \ + .desc = { \ + .name = #_id, \ + .ops = &da9034_regulator_dvc_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = DA9034_ID_##_id, \ + .owner = THIS_MODULE, \ + }, \ + .min_uV = (min) * 1000, \ + .max_uV = (max) * 1000, \ + .step_uV = (step) * 1000, \ + .vol_reg = DA9034_##vreg, \ + .vol_shift = (0), \ + .vol_nbits = (nbits), \ + .update_reg = DA9034_##ureg, \ + .update_bit = (ubit), \ + .enable_reg = DA9034_##ereg, \ + .enable_bit = (ebit), \ +} + +#define DA9034_LDO(_id, min, max, step, vreg, shift, nbits, ereg, ebit) \ + DA903x_LDO(DA9034, _id, min, max, step, vreg, shift, nbits, ereg, ebit) + +#define DA9030_LDO(_id, min, max, step, vreg, shift, nbits, ereg, ebit) \ + DA903x_LDO(DA9030, _id, min, max, step, vreg, shift, nbits, ereg, ebit) + +static struct da903x_regulator_info da903x_regulator_info[] = { + /* DA9030 */ + DA9030_LDO( 1, 1200, 3200, 100, LDO1, 0, 5, RCTL12, 1), + DA9030_LDO( 2, 1800, 3200, 100, LDO23, 0, 4, RCTL12, 2), + DA9030_LDO( 3, 1800, 3200, 100, LDO23, 4, 4, RCTL12, 3), + DA9030_LDO( 4, 1800, 3200, 100, LDO45, 0, 4, RCTL12, 4), + DA9030_LDO( 5, 1800, 3200, 100, LDO45, 4, 4, RCTL12, 5), + DA9030_LDO( 6, 1800, 3200, 100, LDO6, 0, 4, RCTL12, 6), + DA9030_LDO( 7, 1800, 3200, 100, LDO78, 0, 4, RCTL12, 7), + DA9030_LDO( 8, 1800, 3200, 100, LDO78, 4, 4, RCTL22, 0), + DA9030_LDO( 9, 1800, 3200, 100, LDO912, 0, 4, RCTL22, 1), + DA9030_LDO(10, 1800, 3200, 100, LDO1011, 0, 4, RCTL22, 2), + DA9030_LDO(11, 1800, 3200, 100, LDO1011, 4, 4, RCTL22, 3), + DA9030_LDO(12, 1800, 3200, 100, LDO912, 4, 4, RCTL22, 4), + DA9030_LDO(14, 2760, 2940, 30, LDO1416, 0, 3, RCTL11, 4), + DA9030_LDO(15, 1100, 2650, 50, LDO15, 0, 5, RCTL11, 5), + DA9030_LDO(16, 1100, 2650, 50, LDO1416, 3, 5, RCTL11, 6), + DA9030_LDO(17, 1800, 3200, 100, LDO17, 0, 4, RCTL11, 7), + DA9030_LDO(18, 1800, 3200, 100, LDO1819, 0, 4, RCTL21, 2), + DA9030_LDO(19, 1800, 3200, 100, LDO1819, 4, 4, RCTL21, 1), + DA9030_LDO(13, 2100, 2100, 0, INVAL, 0, 0, RCTL11, 3), /* fixed @2.1V */ + + /* DA9034 */ + DA9034_DVC(BUCK1, 725, 1500, 25, ADTV1, 5, VCC1, 0, OVER1, 0), + DA9034_DVC(BUCK2, 725, 1500, 25, CDTV1, 5, VCC1, 2, OVER1, 1), + DA9034_DVC(LDO2, 725, 1500, 25, SDTV1, 5, VCC1, 4, OVER1, 2), + DA9034_DVC(LDO1, 1700, 2075, 25, MDTV1, 4, VCC1, 6, OVER3, 4), + + DA9034_LDO( 3, 1800, 3300, 100, LDO643, 0, 4, OVER3, 5), + DA9034_LDO( 4, 1800, 2900,1100, LDO643, 4, 1, OVER3, 6), + DA9034_LDO( 6, 2500, 2850, 50, LDO643, 5, 3, OVER2, 0), + DA9034_LDO( 7, 2700, 3050, 50, LDO987, 0, 3, OVER2, 1), + DA9034_LDO( 8, 2700, 2850, 50, LDO987, 3, 2, OVER2, 2), + DA9034_LDO( 9, 2700, 3050, 50, LDO987, 5, 3, OVER2, 3), + DA9034_LDO(10, 2700, 3050, 50, LDO1110, 0, 3, OVER2, 4), + DA9034_LDO(11, 1800, 3300, 100, LDO1110, 4, 4, OVER2, 5), + DA9034_LDO(12, 1700, 3050, 50, LDO1312, 0, 4, OVER3, 6), + DA9034_LDO(13, 1800, 3300, 100, LDO1312, 4, 4, OVER2, 7), + DA9034_LDO(14, 1800, 3300, 100, LDO1514, 0, 4, OVER3, 0), + DA9034_LDO(15, 1800, 3300, 100, LDO1514, 4, 4, OVER3, 1), + DA9034_LDO(5, 3100, 3100, 0, INVAL, 0, 0, OVER3, 7), /* fixed @3.1V */ +}; + +static inline struct da903x_regulator_info *find_regulator_info(int id) +{ + struct da903x_regulator_info *ri; + int i; + + for (i = 0; i < ARRAY_SIZE(da903x_regulator_info); i++) { + ri = &da903x_regulator_info[i]; + if (ri->desc.id == id) + return ri; + } + return NULL; +} + +static int __devinit da903x_regulator_probe(struct platform_device *pdev) +{ + struct da903x_regulator_info *ri = NULL; + struct regulator_dev *rdev; + + ri = find_regulator_info(pdev->id); + if (ri == NULL) { + dev_err(&pdev->dev, "invalid regulator ID specified\n"); + return -EINVAL; + } + + /* Workaround for the weird LDO12 voltage setting */ + if (ri->desc.id == DA9034_ID_LDO12) + ri->desc.ops = &da9034_regulator_ldo12_ops; + + if (ri->desc.id == DA9030_ID_LDO14) + ri->desc.ops = &da9030_regulator_ldo14_ops; + + if (ri->desc.id == DA9030_ID_LDO1 || ri->desc.id == DA9030_ID_LDO15) + ri->desc.ops = &da9030_regulator_ldo1_15_ops; + + rdev = regulator_register(&ri->desc, pdev->dev.parent, ri); + if (IS_ERR(rdev)) { + dev_err(&pdev->dev, "failed to register regulator %s\n", + ri->desc.name); + return PTR_ERR(rdev); + } + + platform_set_drvdata(pdev, rdev); + return 0; +} + +static int __devexit da903x_regulator_remove(struct platform_device *pdev) +{ + struct regulator_dev *rdev = platform_get_drvdata(pdev); + + regulator_unregister(rdev); + return 0; +} + +static struct platform_driver da903x_regulator_driver = { + .driver = { + .name = "da903x-regulator", + .owner = THIS_MODULE, + }, + .probe = da903x_regulator_probe, + .remove = da903x_regulator_remove, +}; + +static int __init da903x_regulator_init(void) +{ + return platform_driver_register(&da903x_regulator_driver); +} +module_init(da903x_regulator_init); + +static void __exit da903x_regulator_exit(void) +{ + platform_driver_unregister(&da903x_regulator_driver); +} +module_exit(da903x_regulator_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>" + "Mike Rapoport <mike@compulab.co.il>"); +MODULE_DESCRIPTION("Regulator Driver for Dialog Semiconductor DA903X PMIC"); +MODULE_ALIAS("platform:da903x-regulator"); diff --git a/drivers/regulator/wm8350-regulator.c b/drivers/regulator/wm8350-regulator.c new file mode 100644 index 00000000000..1f44b17e23b --- /dev/null +++ b/drivers/regulator/wm8350-regulator.c @@ -0,0 +1,1431 @@ +/* + * wm8350.c -- Voltage and current regulation for the Wolfson WM8350 PMIC + * + * Copyright 2007, 2008 Wolfson Microelectronics PLC. + * + * Author: Liam Girdwood + * linux@wolfsonmicro.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/bitops.h> +#include <linux/err.h> +#include <linux/i2c.h> +#include <linux/mfd/wm8350/core.h> +#include <linux/mfd/wm8350/pmic.h> +#include <linux/platform_device.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/machine.h> + +/* Microamps */ +static const int isink_cur[] = { + 4, + 5, + 6, + 7, + 8, + 10, + 11, + 14, + 16, + 19, + 23, + 27, + 32, + 39, + 46, + 54, + 65, + 77, + 92, + 109, + 130, + 154, + 183, + 218, + 259, + 308, + 367, + 436, + 518, + 616, + 733, + 872, + 1037, + 1233, + 1466, + 1744, + 2073, + 2466, + 2933, + 3487, + 4147, + 4932, + 5865, + 6975, + 8294, + 9864, + 11730, + 13949, + 16589, + 19728, + 23460, + 27899, + 33178, + 39455, + 46920, + 55798, + 66355, + 78910, + 93840, + 111596, + 132710, + 157820, + 187681, + 223191 +}; + +static int get_isink_val(int min_uA, int max_uA, u16 *setting) +{ + int i; + + for (i = ARRAY_SIZE(isink_cur) - 1; i >= 0; i--) { + if (min_uA <= isink_cur[i] && max_uA >= isink_cur[i]) { + *setting = i; + return 0; + } + } + return -EINVAL; +} + +static inline int wm8350_ldo_val_to_mvolts(unsigned int val) +{ + if (val < 16) + return (val * 50) + 900; + else + return ((val - 16) * 100) + 1800; + +} + +static inline unsigned int wm8350_ldo_mvolts_to_val(int mV) +{ + if (mV < 1800) + return (mV - 900) / 50; + else + return ((mV - 1800) / 100) + 16; +} + +static inline int wm8350_dcdc_val_to_mvolts(unsigned int val) +{ + return (val * 25) + 850; +} + +static inline unsigned int wm8350_dcdc_mvolts_to_val(int mV) +{ + return (mV - 850) / 25; +} + +static int wm8350_isink_set_current(struct regulator_dev *rdev, int min_uA, + int max_uA) +{ + struct wm8350 *wm8350 = rdev_get_drvdata(rdev); + int isink = rdev_get_id(rdev); + u16 val, setting; + int ret; + + ret = get_isink_val(min_uA, max_uA, &setting); + if (ret != 0) + return ret; + + switch (isink) { + case WM8350_ISINK_A: + val = wm8350_reg_read(wm8350, WM8350_CURRENT_SINK_DRIVER_A) & + ~WM8350_CS1_ISEL_MASK; + wm8350_reg_write(wm8350, WM8350_CURRENT_SINK_DRIVER_A, + val | setting); + break; + case WM8350_ISINK_B: + val = wm8350_reg_read(wm8350, WM8350_CURRENT_SINK_DRIVER_B) & + ~WM8350_CS1_ISEL_MASK; + wm8350_reg_write(wm8350, WM8350_CURRENT_SINK_DRIVER_B, + val | setting); + break; + default: + return -EINVAL; + } + + return 0; +} + +static int wm8350_isink_get_current(struct regulator_dev *rdev) +{ + struct wm8350 *wm8350 = rdev_get_drvdata(rdev); + int isink = rdev_get_id(rdev); + u16 val; + + switch (isink) { + case WM8350_ISINK_A: + val = wm8350_reg_read(wm8350, WM8350_CURRENT_SINK_DRIVER_A) & + WM8350_CS1_ISEL_MASK; + break; + case WM8350_ISINK_B: + val = wm8350_reg_read(wm8350, WM8350_CURRENT_SINK_DRIVER_B) & + WM8350_CS1_ISEL_MASK; + break; + default: + return 0; + } + + return (isink_cur[val] + 50) / 100; +} + +/* turn on ISINK followed by DCDC */ +static int wm8350_isink_enable(struct regulator_dev *rdev) +{ + struct wm8350 *wm8350 = rdev_get_drvdata(rdev); + int isink = rdev_get_id(rdev); + + switch (isink) { + case WM8350_ISINK_A: + switch (wm8350->pmic.isink_A_dcdc) { + case WM8350_DCDC_2: + case WM8350_DCDC_5: + wm8350_set_bits(wm8350, WM8350_POWER_MGMT_7, + WM8350_CS1_ENA); + wm8350_set_bits(wm8350, WM8350_CSA_FLASH_CONTROL, + WM8350_CS1_DRIVE); + wm8350_set_bits(wm8350, WM8350_DCDC_LDO_REQUESTED, + 1 << (wm8350->pmic.isink_A_dcdc - + WM8350_DCDC_1)); + break; + default: + return -EINVAL; + } + break; + case WM8350_ISINK_B: + switch (wm8350->pmic.isink_B_dcdc) { + case WM8350_DCDC_2: + case WM8350_DCDC_5: + wm8350_set_bits(wm8350, WM8350_POWER_MGMT_7, + WM8350_CS2_ENA); + wm8350_set_bits(wm8350, WM8350_CSB_FLASH_CONTROL, + WM8350_CS2_DRIVE); + wm8350_set_bits(wm8350, WM8350_DCDC_LDO_REQUESTED, + 1 << (wm8350->pmic.isink_B_dcdc - + WM8350_DCDC_1)); + break; + default: + return -EINVAL; + } + break; + default: + return -EINVAL; + } + return 0; +} + +static int wm8350_isink_disable(struct regulator_dev *rdev) +{ + struct wm8350 *wm8350 = rdev_get_drvdata(rdev); + int isink = rdev_get_id(rdev); + + switch (isink) { + case WM8350_ISINK_A: + switch (wm8350->pmic.isink_A_dcdc) { + case WM8350_DCDC_2: + case WM8350_DCDC_5: + wm8350_clear_bits(wm8350, WM8350_DCDC_LDO_REQUESTED, + 1 << (wm8350->pmic.isink_A_dcdc - + WM8350_DCDC_1)); + wm8350_clear_bits(wm8350, WM8350_POWER_MGMT_7, + WM8350_CS1_ENA); + break; + default: + return -EINVAL; + } + break; + case WM8350_ISINK_B: + switch (wm8350->pmic.isink_B_dcdc) { + case WM8350_DCDC_2: + case WM8350_DCDC_5: + wm8350_clear_bits(wm8350, WM8350_DCDC_LDO_REQUESTED, + 1 << (wm8350->pmic.isink_B_dcdc - + WM8350_DCDC_1)); + wm8350_clear_bits(wm8350, WM8350_POWER_MGMT_7, + WM8350_CS2_ENA); + break; + default: + return -EINVAL; + } + break; + default: + return -EINVAL; + } + return 0; +} + +static int wm8350_isink_is_enabled(struct regulator_dev *rdev) +{ + struct wm8350 *wm8350 = rdev_get_drvdata(rdev); + int isink = rdev_get_id(rdev); + + switch (isink) { + case WM8350_ISINK_A: + return wm8350_reg_read(wm8350, WM8350_CURRENT_SINK_DRIVER_A) & + 0x8000; + case WM8350_ISINK_B: + return wm8350_reg_read(wm8350, WM8350_CURRENT_SINK_DRIVER_B) & + 0x8000; + } + return -EINVAL; +} + +int wm8350_isink_set_flash(struct wm8350 *wm8350, int isink, u16 mode, + u16 trigger, u16 duration, u16 on_ramp, u16 off_ramp, + u16 drive) +{ + switch (isink) { + case WM8350_ISINK_A: + wm8350_reg_write(wm8350, WM8350_CSA_FLASH_CONTROL, + (mode ? WM8350_CS1_FLASH_MODE : 0) | + (trigger ? WM8350_CS1_TRIGSRC : 0) | + duration | on_ramp | off_ramp | drive); + break; + case WM8350_ISINK_B: + wm8350_reg_write(wm8350, WM8350_CSB_FLASH_CONTROL, + (mode ? WM8350_CS2_FLASH_MODE : 0) | + (trigger ? WM8350_CS2_TRIGSRC : 0) | + duration | on_ramp | off_ramp | drive); + break; + default: + return -EINVAL; + } + return 0; +} +EXPORT_SYMBOL_GPL(wm8350_isink_set_flash); + +static int wm8350_dcdc_set_voltage(struct regulator_dev *rdev, int min_uV, + int max_uV) +{ + struct wm8350 *wm8350 = rdev_get_drvdata(rdev); + int volt_reg, dcdc = rdev_get_id(rdev), mV, + min_mV = min_uV / 1000, max_mV = max_uV / 1000; + u16 val; + + if (min_mV < 850 || min_mV > 4025) + return -EINVAL; + if (max_mV < 850 || max_mV > 4025) + return -EINVAL; + + /* step size is 25mV */ + mV = (min_mV - 826) / 25; + if (wm8350_dcdc_val_to_mvolts(mV) > max_mV) + return -EINVAL; + BUG_ON(wm8350_dcdc_val_to_mvolts(mV) < min_mV); + + switch (dcdc) { + case WM8350_DCDC_1: + volt_reg = WM8350_DCDC1_CONTROL; + break; + case WM8350_DCDC_3: + volt_reg = WM8350_DCDC3_CONTROL; + break; + case WM8350_DCDC_4: + volt_reg = WM8350_DCDC4_CONTROL; + break; + case WM8350_DCDC_6: + volt_reg = WM8350_DCDC6_CONTROL; + break; + case WM8350_DCDC_2: + case WM8350_DCDC_5: + default: + return -EINVAL; + } + + /* all DCDCs have same mV bits */ + val = wm8350_reg_read(wm8350, volt_reg) & ~WM8350_DC1_VSEL_MASK; + wm8350_reg_write(wm8350, volt_reg, val | mV); + return 0; +} + +static int wm8350_dcdc_get_voltage(struct regulator_dev *rdev) +{ + struct wm8350 *wm8350 = rdev_get_drvdata(rdev); + int volt_reg, dcdc = rdev_get_id(rdev); + u16 val; + + switch (dcdc) { + case WM8350_DCDC_1: + volt_reg = WM8350_DCDC1_CONTROL; + break; + case WM8350_DCDC_3: + volt_reg = WM8350_DCDC3_CONTROL; + break; + case WM8350_DCDC_4: + volt_reg = WM8350_DCDC4_CONTROL; + break; + case WM8350_DCDC_6: + volt_reg = WM8350_DCDC6_CONTROL; + break; + case WM8350_DCDC_2: + case WM8350_DCDC_5: + default: + return -EINVAL; + } + + /* all DCDCs have same mV bits */ + val = wm8350_reg_read(wm8350, volt_reg) & WM8350_DC1_VSEL_MASK; + return wm8350_dcdc_val_to_mvolts(val) * 1000; +} + +static int wm8350_dcdc_set_suspend_voltage(struct regulator_dev *rdev, int uV) +{ + struct wm8350 *wm8350 = rdev_get_drvdata(rdev); + int volt_reg, mV = uV / 1000, dcdc = rdev_get_id(rdev); + u16 val; + + dev_dbg(wm8350->dev, "%s %d mV %d\n", __func__, dcdc, mV); + + if (mV && (mV < 850 || mV > 4025)) { + dev_err(wm8350->dev, + "DCDC%d suspend voltage %d mV out of range\n", + dcdc, mV); + return -EINVAL; + } + if (mV == 0) + mV = 850; + + switch (dcdc) { + case WM8350_DCDC_1: + volt_reg = WM8350_DCDC1_LOW_POWER; + break; + case WM8350_DCDC_3: + volt_reg = WM8350_DCDC3_LOW_POWER; + break; + case WM8350_DCDC_4: + volt_reg = WM8350_DCDC4_LOW_POWER; + break; + case WM8350_DCDC_6: + volt_reg = WM8350_DCDC6_LOW_POWER; + break; + case WM8350_DCDC_2: + case WM8350_DCDC_5: + default: + return -EINVAL; + } + + /* all DCDCs have same mV bits */ + val = wm8350_reg_read(wm8350, volt_reg) & ~WM8350_DC1_VSEL_MASK; + wm8350_reg_write(wm8350, volt_reg, + val | wm8350_dcdc_mvolts_to_val(mV)); + return 0; +} + +static int wm8350_dcdc_set_suspend_enable(struct regulator_dev *rdev) +{ + struct wm8350 *wm8350 = rdev_get_drvdata(rdev); + int dcdc = rdev_get_id(rdev); + u16 val; + + switch (dcdc) { + case WM8350_DCDC_1: + val = wm8350_reg_read(wm8350, WM8350_DCDC1_LOW_POWER) + & ~WM8350_DCDC_HIB_MODE_MASK; + wm8350_reg_write(wm8350, WM8350_DCDC1_LOW_POWER, + wm8350->pmic.dcdc1_hib_mode); + break; + case WM8350_DCDC_3: + val = wm8350_reg_read(wm8350, WM8350_DCDC3_LOW_POWER) + & ~WM8350_DCDC_HIB_MODE_MASK; + wm8350_reg_write(wm8350, WM8350_DCDC3_LOW_POWER, + wm8350->pmic.dcdc3_hib_mode); + break; + case WM8350_DCDC_4: + val = wm8350_reg_read(wm8350, WM8350_DCDC4_LOW_POWER) + & ~WM8350_DCDC_HIB_MODE_MASK; + wm8350_reg_write(wm8350, WM8350_DCDC4_LOW_POWER, + wm8350->pmic.dcdc4_hib_mode); + break; + case WM8350_DCDC_6: + val = wm8350_reg_read(wm8350, WM8350_DCDC6_LOW_POWER) + & ~WM8350_DCDC_HIB_MODE_MASK; + wm8350_reg_write(wm8350, WM8350_DCDC6_LOW_POWER, + wm8350->pmic.dcdc6_hib_mode); + break; + case WM8350_DCDC_2: + case WM8350_DCDC_5: + default: + return -EINVAL; + } + + return 0; +} + +static int wm8350_dcdc_set_suspend_disable(struct regulator_dev *rdev) +{ + struct wm8350 *wm8350 = rdev_get_drvdata(rdev); + int dcdc = rdev_get_id(rdev); + u16 val; + + switch (dcdc) { + case WM8350_DCDC_1: + val = wm8350_reg_read(wm8350, WM8350_DCDC1_LOW_POWER); + wm8350->pmic.dcdc1_hib_mode = val & WM8350_DCDC_HIB_MODE_MASK; + wm8350_reg_write(wm8350, WM8350_DCDC1_LOW_POWER, + WM8350_DCDC_HIB_MODE_DIS); + break; + case WM8350_DCDC_3: + val = wm8350_reg_read(wm8350, WM8350_DCDC3_LOW_POWER); + wm8350->pmic.dcdc3_hib_mode = val & WM8350_DCDC_HIB_MODE_MASK; + wm8350_reg_write(wm8350, WM8350_DCDC3_LOW_POWER, + WM8350_DCDC_HIB_MODE_DIS); + break; + case WM8350_DCDC_4: + val = wm8350_reg_read(wm8350, WM8350_DCDC4_LOW_POWER); + wm8350->pmic.dcdc4_hib_mode = val & WM8350_DCDC_HIB_MODE_MASK; + wm8350_reg_write(wm8350, WM8350_DCDC4_LOW_POWER, + WM8350_DCDC_HIB_MODE_DIS); + break; + case WM8350_DCDC_6: + val = wm8350_reg_read(wm8350, WM8350_DCDC6_LOW_POWER); + wm8350->pmic.dcdc6_hib_mode = val & WM8350_DCDC_HIB_MODE_MASK; + wm8350_reg_write(wm8350, WM8350_DCDC6_LOW_POWER, + WM8350_DCDC_HIB_MODE_DIS); + break; + case WM8350_DCDC_2: + case WM8350_DCDC_5: + default: + return -EINVAL; + } + + return 0; +} + +static int wm8350_dcdc25_set_suspend_enable(struct regulator_dev *rdev) +{ + struct wm8350 *wm8350 = rdev_get_drvdata(rdev); + int dcdc = rdev_get_id(rdev); + u16 val; + + switch (dcdc) { + case WM8350_DCDC_2: + val = wm8350_reg_read(wm8350, WM8350_DCDC2_CONTROL) + & ~WM8350_DC2_HIB_MODE_MASK; + wm8350_reg_write(wm8350, WM8350_DCDC2_CONTROL, val | + WM8350_DC2_HIB_MODE_ACTIVE); + break; + case WM8350_DCDC_5: + val = wm8350_reg_read(wm8350, WM8350_DCDC5_CONTROL) + & ~WM8350_DC2_HIB_MODE_MASK; + wm8350_reg_write(wm8350, WM8350_DCDC5_CONTROL, val | + WM8350_DC5_HIB_MODE_ACTIVE); + break; + default: + return -EINVAL; + } + return 0; +} + +static int wm8350_dcdc25_set_suspend_disable(struct regulator_dev *rdev) +{ + struct wm8350 *wm8350 = rdev_get_drvdata(rdev); + int dcdc = rdev_get_id(rdev); + u16 val; + + switch (dcdc) { + case WM8350_DCDC_2: + val = wm8350_reg_read(wm8350, WM8350_DCDC2_CONTROL) + & ~WM8350_DC2_HIB_MODE_MASK; + wm8350_reg_write(wm8350, WM8350_DCDC2_CONTROL, val | + WM8350_DC2_HIB_MODE_DISABLE); + break; + case WM8350_DCDC_5: + val = wm8350_reg_read(wm8350, WM8350_DCDC5_CONTROL) + & ~WM8350_DC2_HIB_MODE_MASK; + wm8350_reg_write(wm8350, WM8350_DCDC5_CONTROL, val | + WM8350_DC2_HIB_MODE_DISABLE); + break; + default: + return -EINVAL; + } + return 0; +} + +static int wm8350_dcdc_set_suspend_mode(struct regulator_dev *rdev, + unsigned int mode) +{ + struct wm8350 *wm8350 = rdev_get_drvdata(rdev); + int dcdc = rdev_get_id(rdev); + u16 *hib_mode; + + switch (dcdc) { + case WM8350_DCDC_1: + hib_mode = &wm8350->pmic.dcdc1_hib_mode; + break; + case WM8350_DCDC_3: + hib_mode = &wm8350->pmic.dcdc3_hib_mode; + break; + case WM8350_DCDC_4: + hib_mode = &wm8350->pmic.dcdc4_hib_mode; + break; + case WM8350_DCDC_6: + hib_mode = &wm8350->pmic.dcdc6_hib_mode; + break; + case WM8350_DCDC_2: + case WM8350_DCDC_5: + default: + return -EINVAL; + } + + switch (mode) { + case REGULATOR_MODE_NORMAL: + *hib_mode = WM8350_DCDC_HIB_MODE_IMAGE; + break; + case REGULATOR_MODE_IDLE: + *hib_mode = WM8350_DCDC_HIB_MODE_STANDBY; + break; + case REGULATOR_MODE_STANDBY: + *hib_mode = WM8350_DCDC_HIB_MODE_LDO_IM; + break; + default: + return -EINVAL; + } + + return 0; +} + +static int wm8350_ldo_set_suspend_voltage(struct regulator_dev *rdev, int uV) +{ + struct wm8350 *wm8350 = rdev_get_drvdata(rdev); + int volt_reg, mV = uV / 1000, ldo = rdev_get_id(rdev); + u16 val; + + dev_dbg(wm8350->dev, "%s %d mV %d\n", __func__, ldo, mV); + + if (mV < 900 || mV > 3300) { + dev_err(wm8350->dev, "LDO%d voltage %d mV out of range\n", + ldo, mV); + return -EINVAL; + } + + switch (ldo) { + case WM8350_LDO_1: + volt_reg = WM8350_LDO1_LOW_POWER; + break; + case WM8350_LDO_2: + volt_reg = WM8350_LDO2_LOW_POWER; + break; + case WM8350_LDO_3: + volt_reg = WM8350_LDO3_LOW_POWER; + break; + case WM8350_LDO_4: + volt_reg = WM8350_LDO4_LOW_POWER; + break; + default: + return -EINVAL; + } + + /* all LDOs have same mV bits */ + val = wm8350_reg_read(wm8350, volt_reg) & ~WM8350_LDO1_VSEL_MASK; + wm8350_reg_write(wm8350, volt_reg, + val | wm8350_ldo_mvolts_to_val(mV)); + return 0; +} + +static int wm8350_ldo_set_suspend_enable(struct regulator_dev *rdev) +{ + struct wm8350 *wm8350 = rdev_get_drvdata(rdev); + int volt_reg, ldo = rdev_get_id(rdev); + u16 val; + + switch (ldo) { + case WM8350_LDO_1: + volt_reg = WM8350_LDO1_LOW_POWER; + break; + case WM8350_LDO_2: + volt_reg = WM8350_LDO2_LOW_POWER; + break; + case WM8350_LDO_3: + volt_reg = WM8350_LDO3_LOW_POWER; + break; + case WM8350_LDO_4: + volt_reg = WM8350_LDO4_LOW_POWER; + break; + default: + return -EINVAL; + } + + /* all LDOs have same mV bits */ + val = wm8350_reg_read(wm8350, volt_reg) & ~WM8350_LDO1_HIB_MODE_MASK; + wm8350_reg_write(wm8350, volt_reg, val); + return 0; +} + +static int wm8350_ldo_set_suspend_disable(struct regulator_dev *rdev) +{ + struct wm8350 *wm8350 = rdev_get_drvdata(rdev); + int volt_reg, ldo = rdev_get_id(rdev); + u16 val; + + switch (ldo) { + case WM8350_LDO_1: + volt_reg = WM8350_LDO1_LOW_POWER; + break; + case WM8350_LDO_2: + volt_reg = WM8350_LDO2_LOW_POWER; + break; + case WM8350_LDO_3: + volt_reg = WM8350_LDO3_LOW_POWER; + break; + case WM8350_LDO_4: + volt_reg = WM8350_LDO4_LOW_POWER; + break; + default: + return -EINVAL; + } + + /* all LDOs have same mV bits */ + val = wm8350_reg_read(wm8350, volt_reg) & ~WM8350_LDO1_HIB_MODE_MASK; + wm8350_reg_write(wm8350, volt_reg, WM8350_LDO1_HIB_MODE_DIS); + return 0; +} + +static int wm8350_ldo_set_voltage(struct regulator_dev *rdev, int min_uV, + int max_uV) +{ + struct wm8350 *wm8350 = rdev_get_drvdata(rdev); + int volt_reg, ldo = rdev_get_id(rdev), mV, min_mV = min_uV / 1000, + max_mV = max_uV / 1000; + u16 val; + + if (min_mV < 900 || min_mV > 3300) + return -EINVAL; + if (max_mV < 900 || max_mV > 3300) + return -EINVAL; + + if (min_mV < 1800) { + /* step size is 50mV < 1800mV */ + mV = (min_mV - 851) / 50; + if (wm8350_ldo_val_to_mvolts(mV) > max_mV) + return -EINVAL; + BUG_ON(wm8350_ldo_val_to_mvolts(mV) < min_mV); + } else { + /* step size is 100mV > 1800mV */ + mV = ((min_mV - 1701) / 100) + 16; + if (wm8350_ldo_val_to_mvolts(mV) > max_mV) + return -EINVAL; + BUG_ON(wm8350_ldo_val_to_mvolts(mV) < min_mV); + } + + switch (ldo) { + case WM8350_LDO_1: + volt_reg = WM8350_LDO1_CONTROL; + break; + case WM8350_LDO_2: + volt_reg = WM8350_LDO2_CONTROL; + break; + case WM8350_LDO_3: + volt_reg = WM8350_LDO3_CONTROL; + break; + case WM8350_LDO_4: + volt_reg = WM8350_LDO4_CONTROL; + break; + default: + return -EINVAL; + } + + /* all LDOs have same mV bits */ + val = wm8350_reg_read(wm8350, volt_reg) & ~WM8350_LDO1_VSEL_MASK; + wm8350_reg_write(wm8350, volt_reg, val | mV); + return 0; +} + +static int wm8350_ldo_get_voltage(struct regulator_dev *rdev) +{ + struct wm8350 *wm8350 = rdev_get_drvdata(rdev); + int volt_reg, ldo = rdev_get_id(rdev); + u16 val; + + switch (ldo) { + case WM8350_LDO_1: + volt_reg = WM8350_LDO1_CONTROL; + break; + case WM8350_LDO_2: + volt_reg = WM8350_LDO2_CONTROL; + break; + case WM8350_LDO_3: + volt_reg = WM8350_LDO3_CONTROL; + break; + case WM8350_LDO_4: + volt_reg = WM8350_LDO4_CONTROL; + break; + default: + return -EINVAL; + } + + /* all LDOs have same mV bits */ + val = wm8350_reg_read(wm8350, volt_reg) & WM8350_LDO1_VSEL_MASK; + return wm8350_ldo_val_to_mvolts(val) * 1000; +} + +int wm8350_dcdc_set_slot(struct wm8350 *wm8350, int dcdc, u16 start, + u16 stop, u16 fault) +{ + int slot_reg; + u16 val; + + dev_dbg(wm8350->dev, "%s %d start %d stop %d\n", + __func__, dcdc, start, stop); + + /* slot valid ? */ + if (start > 15 || stop > 15) + return -EINVAL; + + switch (dcdc) { + case WM8350_DCDC_1: + slot_reg = WM8350_DCDC1_TIMEOUTS; + break; + case WM8350_DCDC_2: + slot_reg = WM8350_DCDC2_TIMEOUTS; + break; + case WM8350_DCDC_3: + slot_reg = WM8350_DCDC3_TIMEOUTS; + break; + case WM8350_DCDC_4: + slot_reg = WM8350_DCDC4_TIMEOUTS; + break; + case WM8350_DCDC_5: + slot_reg = WM8350_DCDC5_TIMEOUTS; + break; + case WM8350_DCDC_6: + slot_reg = WM8350_DCDC6_TIMEOUTS; + break; + default: + return -EINVAL; + } + + val = wm8350_reg_read(wm8350, slot_reg) & + ~(WM8350_DC1_ENSLOT_MASK | WM8350_DC1_SDSLOT_MASK | + WM8350_DC1_ERRACT_MASK); + wm8350_reg_write(wm8350, slot_reg, + val | (start << WM8350_DC1_ENSLOT_SHIFT) | + (stop << WM8350_DC1_SDSLOT_SHIFT) | + (fault << WM8350_DC1_ERRACT_SHIFT)); + + return 0; +} +EXPORT_SYMBOL_GPL(wm8350_dcdc_set_slot); + +int wm8350_ldo_set_slot(struct wm8350 *wm8350, int ldo, u16 start, u16 stop) +{ + int slot_reg; + u16 val; + + dev_dbg(wm8350->dev, "%s %d start %d stop %d\n", + __func__, ldo, start, stop); + + /* slot valid ? */ + if (start > 15 || stop > 15) + return -EINVAL; + + switch (ldo) { + case WM8350_LDO_1: + slot_reg = WM8350_LDO1_TIMEOUTS; + break; + case WM8350_LDO_2: + slot_reg = WM8350_LDO2_TIMEOUTS; + break; + case WM8350_LDO_3: + slot_reg = WM8350_LDO3_TIMEOUTS; + break; + case WM8350_LDO_4: + slot_reg = WM8350_LDO4_TIMEOUTS; + break; + default: + return -EINVAL; + } + + val = wm8350_reg_read(wm8350, slot_reg) & ~WM8350_LDO1_SDSLOT_MASK; + wm8350_reg_write(wm8350, slot_reg, val | ((start << 10) | (stop << 6))); + return 0; +} +EXPORT_SYMBOL_GPL(wm8350_ldo_set_slot); + +int wm8350_dcdc25_set_mode(struct wm8350 *wm8350, int dcdc, u16 mode, + u16 ilim, u16 ramp, u16 feedback) +{ + u16 val; + + dev_dbg(wm8350->dev, "%s %d mode: %s %s\n", __func__, dcdc, + mode ? "normal" : "boost", ilim ? "low" : "normal"); + + switch (dcdc) { + case WM8350_DCDC_2: + val = wm8350_reg_read(wm8350, WM8350_DCDC2_CONTROL) + & ~(WM8350_DC2_MODE_MASK | WM8350_DC2_ILIM_MASK | + WM8350_DC2_RMP_MASK | WM8350_DC2_FBSRC_MASK); + wm8350_reg_write(wm8350, WM8350_DCDC2_CONTROL, val | + (mode << WM8350_DC2_MODE_SHIFT) | + (ilim << WM8350_DC2_ILIM_SHIFT) | + (ramp << WM8350_DC2_RMP_SHIFT) | + (feedback << WM8350_DC2_FBSRC_SHIFT)); + break; + case WM8350_DCDC_5: + val = wm8350_reg_read(wm8350, WM8350_DCDC5_CONTROL) + & ~(WM8350_DC5_MODE_MASK | WM8350_DC5_ILIM_MASK | + WM8350_DC5_RMP_MASK | WM8350_DC5_FBSRC_MASK); + wm8350_reg_write(wm8350, WM8350_DCDC5_CONTROL, val | + (mode << WM8350_DC5_MODE_SHIFT) | + (ilim << WM8350_DC5_ILIM_SHIFT) | + (ramp << WM8350_DC5_RMP_SHIFT) | + (feedback << WM8350_DC5_FBSRC_SHIFT)); + break; + default: + return -EINVAL; + } + + return 0; +} +EXPORT_SYMBOL_GPL(wm8350_dcdc25_set_mode); + +static int wm8350_dcdc_enable(struct regulator_dev *rdev) +{ + struct wm8350 *wm8350 = rdev_get_drvdata(rdev); + int dcdc = rdev_get_id(rdev); + u16 shift; + + if (dcdc < WM8350_DCDC_1 || dcdc > WM8350_DCDC_6) + return -EINVAL; + + shift = dcdc - WM8350_DCDC_1; + wm8350_set_bits(wm8350, WM8350_DCDC_LDO_REQUESTED, 1 << shift); + return 0; +} + +static int wm8350_dcdc_disable(struct regulator_dev *rdev) +{ + struct wm8350 *wm8350 = rdev_get_drvdata(rdev); + int dcdc = rdev_get_id(rdev); + u16 shift; + + if (dcdc < WM8350_DCDC_1 || dcdc > WM8350_DCDC_6) + return -EINVAL; + + shift = dcdc - WM8350_DCDC_1; + wm8350_clear_bits(wm8350, WM8350_DCDC_LDO_REQUESTED, 1 << shift); + + return 0; +} + +static int wm8350_ldo_enable(struct regulator_dev *rdev) +{ + struct wm8350 *wm8350 = rdev_get_drvdata(rdev); + int ldo = rdev_get_id(rdev); + u16 shift; + + if (ldo < WM8350_LDO_1 || ldo > WM8350_LDO_4) + return -EINVAL; + + shift = (ldo - WM8350_LDO_1) + 8; + wm8350_set_bits(wm8350, WM8350_DCDC_LDO_REQUESTED, 1 << shift); + return 0; +} + +static int wm8350_ldo_disable(struct regulator_dev *rdev) +{ + struct wm8350 *wm8350 = rdev_get_drvdata(rdev); + int ldo = rdev_get_id(rdev); + u16 shift; + + if (ldo < WM8350_LDO_1 || ldo > WM8350_LDO_4) + return -EINVAL; + + shift = (ldo - WM8350_LDO_1) + 8; + wm8350_clear_bits(wm8350, WM8350_DCDC_LDO_REQUESTED, 1 << shift); + return 0; +} + +static int force_continuous_enable(struct wm8350 *wm8350, int dcdc, int enable) +{ + int reg = 0, ret; + + switch (dcdc) { + case WM8350_DCDC_1: + reg = WM8350_DCDC1_FORCE_PWM; + break; + case WM8350_DCDC_3: + reg = WM8350_DCDC3_FORCE_PWM; + break; + case WM8350_DCDC_4: + reg = WM8350_DCDC4_FORCE_PWM; + break; + case WM8350_DCDC_6: + reg = WM8350_DCDC6_FORCE_PWM; + break; + default: + return -EINVAL; + } + + if (enable) + ret = wm8350_set_bits(wm8350, reg, + WM8350_DCDC1_FORCE_PWM_ENA); + else + ret = wm8350_clear_bits(wm8350, reg, + WM8350_DCDC1_FORCE_PWM_ENA); + return ret; +} + +static int wm8350_dcdc_set_mode(struct regulator_dev *rdev, unsigned int mode) +{ + struct wm8350 *wm8350 = rdev_get_drvdata(rdev); + int dcdc = rdev_get_id(rdev); + u16 val; + + if (dcdc < WM8350_DCDC_1 || dcdc > WM8350_DCDC_6) + return -EINVAL; + + if (dcdc == WM8350_DCDC_2 || dcdc == WM8350_DCDC_5) + return -EINVAL; + + val = 1 << (dcdc - WM8350_DCDC_1); + + switch (mode) { + case REGULATOR_MODE_FAST: + /* force continuous mode */ + wm8350_set_bits(wm8350, WM8350_DCDC_ACTIVE_OPTIONS, val); + wm8350_clear_bits(wm8350, WM8350_DCDC_SLEEP_OPTIONS, val); + force_continuous_enable(wm8350, dcdc, 1); + break; + case REGULATOR_MODE_NORMAL: + /* active / pulse skipping */ + wm8350_set_bits(wm8350, WM8350_DCDC_ACTIVE_OPTIONS, val); + wm8350_clear_bits(wm8350, WM8350_DCDC_SLEEP_OPTIONS, val); + force_continuous_enable(wm8350, dcdc, 0); + break; + case REGULATOR_MODE_IDLE: + /* standby mode */ + force_continuous_enable(wm8350, dcdc, 0); + wm8350_clear_bits(wm8350, WM8350_DCDC_SLEEP_OPTIONS, val); + wm8350_clear_bits(wm8350, WM8350_DCDC_ACTIVE_OPTIONS, val); + break; + case REGULATOR_MODE_STANDBY: + /* LDO mode */ + force_continuous_enable(wm8350, dcdc, 0); + wm8350_set_bits(wm8350, WM8350_DCDC_SLEEP_OPTIONS, val); + break; + } + + return 0; +} + +static unsigned int wm8350_dcdc_get_mode(struct regulator_dev *rdev) +{ + struct wm8350 *wm8350 = rdev_get_drvdata(rdev); + int dcdc = rdev_get_id(rdev); + u16 mask, sleep, active, force; + int mode = REGULATOR_MODE_NORMAL; + + if (dcdc < WM8350_DCDC_1 || dcdc > WM8350_DCDC_6) + return -EINVAL; + + if (dcdc == WM8350_DCDC_2 || dcdc == WM8350_DCDC_5) + return -EINVAL; + + mask = 1 << (dcdc - WM8350_DCDC_1); + active = wm8350_reg_read(wm8350, WM8350_DCDC_ACTIVE_OPTIONS) & mask; + sleep = wm8350_reg_read(wm8350, WM8350_DCDC_SLEEP_OPTIONS) & mask; + force = wm8350_reg_read(wm8350, WM8350_DCDC1_FORCE_PWM) + & WM8350_DCDC1_FORCE_PWM_ENA; + dev_dbg(wm8350->dev, "mask %x active %x sleep %x force %x", + mask, active, sleep, force); + + if (active && !sleep) { + if (force) + mode = REGULATOR_MODE_FAST; + else + mode = REGULATOR_MODE_NORMAL; + } else if (!active && !sleep) + mode = REGULATOR_MODE_IDLE; + else if (!sleep) + mode = REGULATOR_MODE_STANDBY; + + return mode; +} + +static unsigned int wm8350_ldo_get_mode(struct regulator_dev *rdev) +{ + return REGULATOR_MODE_NORMAL; +} + +struct wm8350_dcdc_efficiency { + int uA_load_min; + int uA_load_max; + unsigned int mode; +}; + +static const struct wm8350_dcdc_efficiency dcdc1_6_efficiency[] = { + {0, 10000, REGULATOR_MODE_STANDBY}, /* 0 - 10mA - LDO */ + {10000, 100000, REGULATOR_MODE_IDLE}, /* 10mA - 100mA - Standby */ + {100000, 1000000, REGULATOR_MODE_NORMAL}, /* > 100mA - Active */ + {-1, -1, REGULATOR_MODE_NORMAL}, +}; + +static const struct wm8350_dcdc_efficiency dcdc3_4_efficiency[] = { + {0, 10000, REGULATOR_MODE_STANDBY}, /* 0 - 10mA - LDO */ + {10000, 100000, REGULATOR_MODE_IDLE}, /* 10mA - 100mA - Standby */ + {100000, 800000, REGULATOR_MODE_NORMAL}, /* > 100mA - Active */ + {-1, -1, REGULATOR_MODE_NORMAL}, +}; + +static unsigned int get_mode(int uA, const struct wm8350_dcdc_efficiency *eff) +{ + int i = 0; + + while (eff[i].uA_load_min != -1) { + if (uA >= eff[i].uA_load_min && uA <= eff[i].uA_load_max) + return eff[i].mode; + } + return REGULATOR_MODE_NORMAL; +} + +/* Query the regulator for it's most efficient mode @ uV,uA + * WM8350 regulator efficiency is pretty similar over + * different input and output uV. + */ +static unsigned int wm8350_dcdc_get_optimum_mode(struct regulator_dev *rdev, + int input_uV, int output_uV, + int output_uA) +{ + int dcdc = rdev_get_id(rdev), mode; + + switch (dcdc) { + case WM8350_DCDC_1: + case WM8350_DCDC_6: + mode = get_mode(output_uA, dcdc1_6_efficiency); + break; + case WM8350_DCDC_3: + case WM8350_DCDC_4: + mode = get_mode(output_uA, dcdc3_4_efficiency); + break; + default: + mode = REGULATOR_MODE_NORMAL; + break; + } + return mode; +} + +static int wm8350_dcdc_is_enabled(struct regulator_dev *rdev) +{ + struct wm8350 *wm8350 = rdev_get_drvdata(rdev); + int dcdc = rdev_get_id(rdev), shift; + + if (dcdc < WM8350_DCDC_1 || dcdc > WM8350_DCDC_6) + return -EINVAL; + + shift = dcdc - WM8350_DCDC_1; + return wm8350_reg_read(wm8350, WM8350_DCDC_LDO_REQUESTED) + & (1 << shift); +} + +static int wm8350_ldo_is_enabled(struct regulator_dev *rdev) +{ + struct wm8350 *wm8350 = rdev_get_drvdata(rdev); + int ldo = rdev_get_id(rdev), shift; + + if (ldo < WM8350_LDO_1 || ldo > WM8350_LDO_4) + return -EINVAL; + + shift = (ldo - WM8350_LDO_1) + 8; + return wm8350_reg_read(wm8350, WM8350_DCDC_LDO_REQUESTED) + & (1 << shift); +} + +static struct regulator_ops wm8350_dcdc_ops = { + .set_voltage = wm8350_dcdc_set_voltage, + .get_voltage = wm8350_dcdc_get_voltage, + .enable = wm8350_dcdc_enable, + .disable = wm8350_dcdc_disable, + .get_mode = wm8350_dcdc_get_mode, + .set_mode = wm8350_dcdc_set_mode, + .get_optimum_mode = wm8350_dcdc_get_optimum_mode, + .is_enabled = wm8350_dcdc_is_enabled, + .set_suspend_voltage = wm8350_dcdc_set_suspend_voltage, + .set_suspend_enable = wm8350_dcdc_set_suspend_enable, + .set_suspend_disable = wm8350_dcdc_set_suspend_disable, + .set_suspend_mode = wm8350_dcdc_set_suspend_mode, +}; + +static struct regulator_ops wm8350_dcdc2_5_ops = { + .enable = wm8350_dcdc_enable, + .disable = wm8350_dcdc_disable, + .is_enabled = wm8350_dcdc_is_enabled, + .set_suspend_enable = wm8350_dcdc25_set_suspend_enable, + .set_suspend_disable = wm8350_dcdc25_set_suspend_disable, +}; + +static struct regulator_ops wm8350_ldo_ops = { + .set_voltage = wm8350_ldo_set_voltage, + .get_voltage = wm8350_ldo_get_voltage, + .enable = wm8350_ldo_enable, + .disable = wm8350_ldo_disable, + .is_enabled = wm8350_ldo_is_enabled, + .get_mode = wm8350_ldo_get_mode, + .set_suspend_voltage = wm8350_ldo_set_suspend_voltage, + .set_suspend_enable = wm8350_ldo_set_suspend_enable, + .set_suspend_disable = wm8350_ldo_set_suspend_disable, +}; + +static struct regulator_ops wm8350_isink_ops = { + .set_current_limit = wm8350_isink_set_current, + .get_current_limit = wm8350_isink_get_current, + .enable = wm8350_isink_enable, + .disable = wm8350_isink_disable, + .is_enabled = wm8350_isink_is_enabled, +}; + +static struct regulator_desc wm8350_reg[NUM_WM8350_REGULATORS] = { + { + .name = "DCDC1", + .id = WM8350_DCDC_1, + .ops = &wm8350_dcdc_ops, + .irq = WM8350_IRQ_UV_DC1, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + { + .name = "DCDC2", + .id = WM8350_DCDC_2, + .ops = &wm8350_dcdc2_5_ops, + .irq = WM8350_IRQ_UV_DC2, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + { + .name = "DCDC3", + .id = WM8350_DCDC_3, + .ops = &wm8350_dcdc_ops, + .irq = WM8350_IRQ_UV_DC3, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + { + .name = "DCDC4", + .id = WM8350_DCDC_4, + .ops = &wm8350_dcdc_ops, + .irq = WM8350_IRQ_UV_DC4, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + { + .name = "DCDC5", + .id = WM8350_DCDC_5, + .ops = &wm8350_dcdc2_5_ops, + .irq = WM8350_IRQ_UV_DC5, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + { + .name = "DCDC6", + .id = WM8350_DCDC_6, + .ops = &wm8350_dcdc_ops, + .irq = WM8350_IRQ_UV_DC6, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + { + .name = "LDO1", + .id = WM8350_LDO_1, + .ops = &wm8350_ldo_ops, + .irq = WM8350_IRQ_UV_LDO1, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + { + .name = "LDO2", + .id = WM8350_LDO_2, + .ops = &wm8350_ldo_ops, + .irq = WM8350_IRQ_UV_LDO2, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + { + .name = "LDO3", + .id = WM8350_LDO_3, + .ops = &wm8350_ldo_ops, + .irq = WM8350_IRQ_UV_LDO3, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + { + .name = "LDO4", + .id = WM8350_LDO_4, + .ops = &wm8350_ldo_ops, + .irq = WM8350_IRQ_UV_LDO4, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + { + .name = "ISINKA", + .id = WM8350_ISINK_A, + .ops = &wm8350_isink_ops, + .irq = WM8350_IRQ_CS1, + .type = REGULATOR_CURRENT, + .owner = THIS_MODULE, + }, + { + .name = "ISINKB", + .id = WM8350_ISINK_B, + .ops = &wm8350_isink_ops, + .irq = WM8350_IRQ_CS2, + .type = REGULATOR_CURRENT, + .owner = THIS_MODULE, + }, +}; + +static void pmic_uv_handler(struct wm8350 *wm8350, int irq, void *data) +{ + struct regulator_dev *rdev = (struct regulator_dev *)data; + + if (irq == WM8350_IRQ_CS1 || irq == WM8350_IRQ_CS2) + regulator_notifier_call_chain(rdev, + REGULATOR_EVENT_REGULATION_OUT, + wm8350); + else + regulator_notifier_call_chain(rdev, + REGULATOR_EVENT_UNDER_VOLTAGE, + wm8350); +} + +static int wm8350_regulator_probe(struct platform_device *pdev) +{ + struct wm8350 *wm8350 = dev_get_drvdata(&pdev->dev); + struct regulator_dev *rdev; + int ret; + u16 val; + + if (pdev->id < WM8350_DCDC_1 || pdev->id > WM8350_ISINK_B) + return -ENODEV; + + /* do any regulatior specific init */ + switch (pdev->id) { + case WM8350_DCDC_1: + val = wm8350_reg_read(wm8350, WM8350_DCDC1_LOW_POWER); + wm8350->pmic.dcdc1_hib_mode = val & WM8350_DCDC_HIB_MODE_MASK; + break; + case WM8350_DCDC_3: + val = wm8350_reg_read(wm8350, WM8350_DCDC3_LOW_POWER); + wm8350->pmic.dcdc3_hib_mode = val & WM8350_DCDC_HIB_MODE_MASK; + break; + case WM8350_DCDC_4: + val = wm8350_reg_read(wm8350, WM8350_DCDC4_LOW_POWER); + wm8350->pmic.dcdc4_hib_mode = val & WM8350_DCDC_HIB_MODE_MASK; + break; + case WM8350_DCDC_6: + val = wm8350_reg_read(wm8350, WM8350_DCDC6_LOW_POWER); + wm8350->pmic.dcdc6_hib_mode = val & WM8350_DCDC_HIB_MODE_MASK; + break; + } + + + /* register regulator */ + rdev = regulator_register(&wm8350_reg[pdev->id], &pdev->dev, + dev_get_drvdata(&pdev->dev)); + if (IS_ERR(rdev)) { + dev_err(&pdev->dev, "failed to register %s\n", + wm8350_reg[pdev->id].name); + return PTR_ERR(rdev); + } + + /* register regulator IRQ */ + ret = wm8350_register_irq(wm8350, wm8350_reg[pdev->id].irq, + pmic_uv_handler, rdev); + if (ret < 0) { + regulator_unregister(rdev); + dev_err(&pdev->dev, "failed to register regulator %s IRQ\n", + wm8350_reg[pdev->id].name); + return ret; + } + + wm8350_unmask_irq(wm8350, wm8350_reg[pdev->id].irq); + + return 0; +} + +static int wm8350_regulator_remove(struct platform_device *pdev) +{ + struct regulator_dev *rdev = platform_get_drvdata(pdev); + struct wm8350 *wm8350 = rdev_get_drvdata(rdev); + + wm8350_mask_irq(wm8350, wm8350_reg[pdev->id].irq); + wm8350_free_irq(wm8350, wm8350_reg[pdev->id].irq); + + regulator_unregister(rdev); + + return 0; +} + +int wm8350_register_regulator(struct wm8350 *wm8350, int reg, + struct regulator_init_data *initdata) +{ + struct platform_device *pdev; + int ret; + + if (wm8350->pmic.pdev[reg]) + return -EBUSY; + + pdev = platform_device_alloc("wm8350-regulator", reg); + if (!pdev) + return -ENOMEM; + + wm8350->pmic.pdev[reg] = pdev; + + initdata->driver_data = wm8350; + + pdev->dev.platform_data = initdata; + pdev->dev.parent = wm8350->dev; + platform_set_drvdata(pdev, wm8350); + + ret = platform_device_add(pdev); + + if (ret != 0) { + dev_err(wm8350->dev, "Failed to register regulator %d: %d\n", + reg, ret); + platform_device_del(pdev); + wm8350->pmic.pdev[reg] = NULL; + } + + return ret; +} +EXPORT_SYMBOL_GPL(wm8350_register_regulator); + +static struct platform_driver wm8350_regulator_driver = { + .probe = wm8350_regulator_probe, + .remove = wm8350_regulator_remove, + .driver = { + .name = "wm8350-regulator", + }, +}; + +static int __init wm8350_regulator_init(void) +{ + return platform_driver_register(&wm8350_regulator_driver); +} +subsys_initcall(wm8350_regulator_init); + +static void __exit wm8350_regulator_exit(void) +{ + platform_driver_unregister(&wm8350_regulator_driver); +} +module_exit(wm8350_regulator_exit); + +/* Module information */ +MODULE_AUTHOR("Liam Girdwood"); +MODULE_DESCRIPTION("WM8350 voltage and current regulator driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/regulator/wm8400-regulator.c b/drivers/regulator/wm8400-regulator.c new file mode 100644 index 00000000000..48b372e038a --- /dev/null +++ b/drivers/regulator/wm8400-regulator.c @@ -0,0 +1,368 @@ +/* + * Regulator support for WM8400 + * + * Copyright 2008 Wolfson Microelectronics PLC. + * + * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + */ + +#include <linux/bug.h> +#include <linux/err.h> +#include <linux/kernel.h> +#include <linux/regulator/driver.h> +#include <linux/mfd/wm8400-private.h> + +static int wm8400_ldo_is_enabled(struct regulator_dev *dev) +{ + struct wm8400 *wm8400 = rdev_get_drvdata(dev); + u16 val; + + val = wm8400_reg_read(wm8400, WM8400_LDO1_CONTROL + rdev_get_id(dev)); + return (val & WM8400_LDO1_ENA) != 0; +} + +static int wm8400_ldo_enable(struct regulator_dev *dev) +{ + struct wm8400 *wm8400 = rdev_get_drvdata(dev); + + return wm8400_set_bits(wm8400, WM8400_LDO1_CONTROL + rdev_get_id(dev), + WM8400_LDO1_ENA, WM8400_LDO1_ENA); +} + +static int wm8400_ldo_disable(struct regulator_dev *dev) +{ + struct wm8400 *wm8400 = rdev_get_drvdata(dev); + + return wm8400_set_bits(wm8400, WM8400_LDO1_CONTROL + rdev_get_id(dev), + WM8400_LDO1_ENA, 0); +} + +static int wm8400_ldo_get_voltage(struct regulator_dev *dev) +{ + struct wm8400 *wm8400 = rdev_get_drvdata(dev); + u16 val; + + val = wm8400_reg_read(wm8400, WM8400_LDO1_CONTROL + rdev_get_id(dev)); + val &= WM8400_LDO1_VSEL_MASK; + + if (val < 15) + return 900000 + (val * 50000); + else + return 1600000 + ((val - 14) * 100000); +} + +static int wm8400_ldo_set_voltage(struct regulator_dev *dev, + int min_uV, int max_uV) +{ + struct wm8400 *wm8400 = rdev_get_drvdata(dev); + u16 val; + + if (min_uV < 900000 || min_uV > 3300000) + return -EINVAL; + + if (min_uV < 1700000) { + /* Steps of 50mV from 900mV; */ + val = (min_uV - 850001) / 50000; + + if ((val * 50000) + 900000 > max_uV) + return -EINVAL; + BUG_ON((val * 50000) + 900000 < min_uV); + } else { + /* Steps of 100mV from 1700mV */ + val = ((min_uV - 1600001) / 100000); + + if ((val * 100000) + 1700000 > max_uV) + return -EINVAL; + BUG_ON((val * 100000) + 1700000 < min_uV); + + val += 0xf; + } + + return wm8400_set_bits(wm8400, WM8400_LDO1_CONTROL + rdev_get_id(dev), + WM8400_LDO1_VSEL_MASK, val); +} + +static struct regulator_ops wm8400_ldo_ops = { + .is_enabled = wm8400_ldo_is_enabled, + .enable = wm8400_ldo_enable, + .disable = wm8400_ldo_disable, + .get_voltage = wm8400_ldo_get_voltage, + .set_voltage = wm8400_ldo_set_voltage, +}; + +static int wm8400_dcdc_is_enabled(struct regulator_dev *dev) +{ + struct wm8400 *wm8400 = rdev_get_drvdata(dev); + int offset = (rdev_get_id(dev) - WM8400_DCDC1) * 2; + u16 val; + + val = wm8400_reg_read(wm8400, WM8400_DCDC1_CONTROL_1 + offset); + return (val & WM8400_DC1_ENA) != 0; +} + +static int wm8400_dcdc_enable(struct regulator_dev *dev) +{ + struct wm8400 *wm8400 = rdev_get_drvdata(dev); + int offset = (rdev_get_id(dev) - WM8400_DCDC1) * 2; + + return wm8400_set_bits(wm8400, WM8400_DCDC1_CONTROL_1 + offset, + WM8400_DC1_ENA, WM8400_DC1_ENA); +} + +static int wm8400_dcdc_disable(struct regulator_dev *dev) +{ + struct wm8400 *wm8400 = rdev_get_drvdata(dev); + int offset = (rdev_get_id(dev) - WM8400_DCDC1) * 2; + + return wm8400_set_bits(wm8400, WM8400_DCDC1_CONTROL_1 + offset, + WM8400_DC1_ENA, 0); +} + +static int wm8400_dcdc_get_voltage(struct regulator_dev *dev) +{ + struct wm8400 *wm8400 = rdev_get_drvdata(dev); + u16 val; + int offset = (rdev_get_id(dev) - WM8400_DCDC1) * 2; + + val = wm8400_reg_read(wm8400, WM8400_DCDC1_CONTROL_1 + offset); + val &= WM8400_DC1_VSEL_MASK; + + return 850000 + (25000 * val); +} + +static int wm8400_dcdc_set_voltage(struct regulator_dev *dev, + int min_uV, int max_uV) +{ + struct wm8400 *wm8400 = rdev_get_drvdata(dev); + u16 val; + int offset = (rdev_get_id(dev) - WM8400_DCDC1) * 2; + + if (min_uV < 850000) + return -EINVAL; + + val = (min_uV - 825001) / 25000; + + if (850000 + (25000 * val) > max_uV) + return -EINVAL; + BUG_ON(850000 + (25000 * val) < min_uV); + + return wm8400_set_bits(wm8400, WM8400_DCDC1_CONTROL_1 + offset, + WM8400_DC1_VSEL_MASK, val); +} + +static unsigned int wm8400_dcdc_get_mode(struct regulator_dev *dev) +{ + struct wm8400 *wm8400 = rdev_get_drvdata(dev); + int offset = (rdev_get_id(dev) - WM8400_DCDC1) * 2; + u16 data[2]; + int ret; + + ret = wm8400_block_read(wm8400, WM8400_DCDC1_CONTROL_1 + offset, 2, + data); + if (ret != 0) + return 0; + + /* Datasheet: hibernate */ + if (data[0] & WM8400_DC1_SLEEP) + return REGULATOR_MODE_STANDBY; + + /* Datasheet: standby */ + if (!(data[0] & WM8400_DC1_ACTIVE)) + return REGULATOR_MODE_IDLE; + + /* Datasheet: active with or without force PWM */ + if (data[1] & WM8400_DC1_FRC_PWM) + return REGULATOR_MODE_FAST; + else + return REGULATOR_MODE_NORMAL; +} + +static int wm8400_dcdc_set_mode(struct regulator_dev *dev, unsigned int mode) +{ + struct wm8400 *wm8400 = rdev_get_drvdata(dev); + int offset = (rdev_get_id(dev) - WM8400_DCDC1) * 2; + int ret; + + switch (mode) { + case REGULATOR_MODE_FAST: + /* Datasheet: active with force PWM */ + ret = wm8400_set_bits(wm8400, WM8400_DCDC1_CONTROL_2 + offset, + WM8400_DC1_FRC_PWM, WM8400_DC1_FRC_PWM); + if (ret != 0) + return ret; + + return wm8400_set_bits(wm8400, WM8400_DCDC1_CONTROL_1 + offset, + WM8400_DC1_ACTIVE | WM8400_DC1_SLEEP, + WM8400_DC1_ACTIVE); + + case REGULATOR_MODE_NORMAL: + /* Datasheet: active */ + ret = wm8400_set_bits(wm8400, WM8400_DCDC1_CONTROL_2 + offset, + WM8400_DC1_FRC_PWM, 0); + if (ret != 0) + return ret; + + return wm8400_set_bits(wm8400, WM8400_DCDC1_CONTROL_1 + offset, + WM8400_DC1_ACTIVE | WM8400_DC1_SLEEP, + WM8400_DC1_ACTIVE); + + case REGULATOR_MODE_IDLE: + /* Datasheet: standby */ + ret = wm8400_set_bits(wm8400, WM8400_DCDC1_CONTROL_1 + offset, + WM8400_DC1_ACTIVE, 0); + if (ret != 0) + return ret; + return wm8400_set_bits(wm8400, WM8400_DCDC1_CONTROL_1 + offset, + WM8400_DC1_SLEEP, 0); + + default: + return -EINVAL; + } +} + +static unsigned int wm8400_dcdc_get_optimum_mode(struct regulator_dev *dev, + int input_uV, int output_uV, + int load_uA) +{ + return REGULATOR_MODE_NORMAL; +} + +static struct regulator_ops wm8400_dcdc_ops = { + .is_enabled = wm8400_dcdc_is_enabled, + .enable = wm8400_dcdc_enable, + .disable = wm8400_dcdc_disable, + .get_voltage = wm8400_dcdc_get_voltage, + .set_voltage = wm8400_dcdc_set_voltage, + .get_mode = wm8400_dcdc_get_mode, + .set_mode = wm8400_dcdc_set_mode, + .get_optimum_mode = wm8400_dcdc_get_optimum_mode, +}; + +static struct regulator_desc regulators[] = { + { + .name = "LDO1", + .id = WM8400_LDO1, + .ops = &wm8400_ldo_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + { + .name = "LDO2", + .id = WM8400_LDO2, + .ops = &wm8400_ldo_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + { + .name = "LDO3", + .id = WM8400_LDO3, + .ops = &wm8400_ldo_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + { + .name = "LDO4", + .id = WM8400_LDO4, + .ops = &wm8400_ldo_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + { + .name = "DCDC1", + .id = WM8400_DCDC1, + .ops = &wm8400_dcdc_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + { + .name = "DCDC2", + .id = WM8400_DCDC2, + .ops = &wm8400_dcdc_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, +}; + +static int __init wm8400_regulator_probe(struct platform_device *pdev) +{ + struct regulator_dev *rdev; + + rdev = regulator_register(®ulators[pdev->id], &pdev->dev, + pdev->dev.driver_data); + + if (IS_ERR(rdev)) + return PTR_ERR(rdev); + + return 0; +} + +static int __devexit wm8400_regulator_remove(struct platform_device *pdev) +{ + struct regulator_dev *rdev = platform_get_drvdata(pdev); + + regulator_unregister(rdev); + + return 0; +} + +static struct platform_driver wm8400_regulator_driver = { + .driver = { + .name = "wm8400-regulator", + }, + .probe = wm8400_regulator_probe, + .remove = __devexit_p(wm8400_regulator_remove), +}; + +/** + * wm8400_register_regulator - enable software control of a WM8400 regulator + * + * This function enables software control of a WM8400 regulator via + * the regulator API. It is intended to be called from the + * platform_init() callback of the WM8400 MFD driver. + * + * @param dev The WM8400 device to operate on. + * @param reg The regulator to control. + * @param initdata Regulator initdata for the regulator. + */ +int wm8400_register_regulator(struct device *dev, int reg, + struct regulator_init_data *initdata) +{ + struct wm8400 *wm8400 = dev->driver_data; + + if (wm8400->regulators[reg].name) + return -EBUSY; + + initdata->driver_data = wm8400; + + wm8400->regulators[reg].name = "wm8400-regulator"; + wm8400->regulators[reg].id = reg; + wm8400->regulators[reg].dev.parent = dev; + wm8400->regulators[reg].dev.driver_data = wm8400; + wm8400->regulators[reg].dev.platform_data = initdata; + + return platform_device_register(&wm8400->regulators[reg]); +} +EXPORT_SYMBOL_GPL(wm8400_register_regulator); + +static int __init wm8400_regulator_init(void) +{ + return platform_driver_register(&wm8400_regulator_driver); +} +module_init(wm8400_regulator_init); + +static void __exit wm8400_regulator_exit(void) +{ + platform_driver_unregister(&wm8400_regulator_driver); +} +module_exit(wm8400_regulator_exit); + +MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); +MODULE_DESCRIPTION("WM8400 regulator driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:wm8400-regulator"); |