summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/pcmcia/o2micro.h10
-rw-r--r--drivers/pcmcia/ti113x.h78
-rw-r--r--drivers/pcmcia/yenta_socket.c86
3 files changed, 97 insertions, 77 deletions
diff --git a/drivers/pcmcia/o2micro.h b/drivers/pcmcia/o2micro.h
index a234ce1967a..5554015a781 100644
--- a/drivers/pcmcia/o2micro.h
+++ b/drivers/pcmcia/o2micro.h
@@ -140,7 +140,8 @@ static int o2micro_override(struct yenta_socket *socket)
a = config_readb(socket, O2_RESERVED1);
b = config_readb(socket, O2_RESERVED2);
- printk(KERN_INFO "Yenta O2: res at 0x94/0xD4: %02x/%02x\n", a, b);
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "O2: res at 0x94/0xD4: %02x/%02x\n", a, b);
switch (socket->dev->device) {
/*
@@ -153,7 +154,9 @@ static int o2micro_override(struct yenta_socket *socket)
case PCI_DEVICE_ID_O2_6812:
case PCI_DEVICE_ID_O2_6832:
case PCI_DEVICE_ID_O2_6836:
- printk(KERN_INFO "Yenta O2: old bridge, disabling read prefetch/write burst\n");
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "Yenta O2: old bridge, disabling read "
+ "prefetch/write burst\n");
config_writeb(socket, O2_RESERVED1,
a & ~(O2_RES_READ_PREFETCH | O2_RES_WRITE_BURST));
config_writeb(socket, O2_RESERVED2,
@@ -161,7 +164,8 @@ static int o2micro_override(struct yenta_socket *socket)
break;
default:
- printk(KERN_INFO "Yenta O2: enabling read prefetch/write burst\n");
+ dev_printk(KERN_INFO , &socket->dev->dev,
+ "O2: enabling read prefetch/write burst\n");
config_writeb(socket, O2_RESERVED1,
a | O2_RES_READ_PREFETCH | O2_RES_WRITE_BURST);
config_writeb(socket, O2_RESERVED2,
diff --git a/drivers/pcmcia/ti113x.h b/drivers/pcmcia/ti113x.h
index 129db7bd06c..aaa70227bfb 100644
--- a/drivers/pcmcia/ti113x.h
+++ b/drivers/pcmcia/ti113x.h
@@ -339,8 +339,8 @@ static void ti12xx_irqroute_func0(struct yenta_socket *socket)
mfunc = mfunc_old = config_readl(socket, TI122X_MFUNC);
devctl = config_readb(socket, TI113X_DEVICE_CONTROL);
- printk(KERN_INFO "Yenta TI: socket %s, mfunc 0x%08x, devctl 0x%02x\n",
- pci_name(socket->dev), mfunc, devctl);
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "TI: mfunc 0x%08x, devctl 0x%02x\n", mfunc, devctl);
/* make sure PCI interrupts are enabled before probing */
ti_init(socket);
@@ -354,8 +354,8 @@ static void ti12xx_irqroute_func0(struct yenta_socket *socket)
* We're here which means PCI interrupts are _not_ delivered. try to
* find the right setting (all serial or parallel)
*/
- printk(KERN_INFO "Yenta TI: socket %s probing PCI interrupt failed, trying to fix\n",
- pci_name(socket->dev));
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "TI: probing PCI interrupt failed, trying to fix\n");
/* for serial PCI make sure MFUNC3 is set to IRQSER */
if ((devctl & TI113X_DCR_IMODE_MASK) == TI12XX_DCR_IMODE_ALL_SERIAL) {
@@ -379,8 +379,8 @@ static void ti12xx_irqroute_func0(struct yenta_socket *socket)
pci_irq_status = yenta_probe_cb_irq(socket);
if (pci_irq_status == 1) {
- printk(KERN_INFO "Yenta TI: socket %s all-serial interrupts ok\n",
- pci_name(socket->dev));
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "TI: all-serial interrupts ok\n");
mfunc_old = mfunc;
goto out;
}
@@ -395,8 +395,8 @@ static void ti12xx_irqroute_func0(struct yenta_socket *socket)
}
/* serial PCI interrupts not working fall back to parallel */
- printk(KERN_INFO "Yenta TI: socket %s falling back to parallel PCI interrupts\n",
- pci_name(socket->dev));
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "TI: falling back to parallel PCI interrupts\n");
devctl &= ~TI113X_DCR_IMODE_MASK;
devctl |= TI113X_DCR_IMODE_SERIAL; /* serial ISA could be right */
config_writeb(socket, TI113X_DEVICE_CONTROL, devctl);
@@ -427,8 +427,8 @@ static void ti12xx_irqroute_func0(struct yenta_socket *socket)
pci_irq_status = yenta_probe_cb_irq(socket);
if (pci_irq_status == 1) {
mfunc_old = mfunc;
- printk(KERN_INFO "Yenta TI: socket %s parallel PCI interrupts ok\n",
- pci_name(socket->dev));
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "TI: parallel PCI interrupts ok\n");
} else {
/* not working, back to old value */
mfunc = mfunc_old;
@@ -440,8 +440,9 @@ static void ti12xx_irqroute_func0(struct yenta_socket *socket)
out:
if (pci_irq_status < 1) {
socket->cb_irq = 0;
- printk(KERN_INFO "Yenta TI: socket %s no PCI interrupts. Fish. Please report.\n",
- pci_name(socket->dev));
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "Yenta TI: no PCI interrupts. Fish. "
+ "Please report.\n");
}
}
@@ -513,8 +514,9 @@ static void ti12xx_irqroute_func1(struct yenta_socket *socket)
mfunc = mfunc_old = config_readl(socket, TI122X_MFUNC);
devctl = config_readb(socket, TI113X_DEVICE_CONTROL);
- printk(KERN_INFO "Yenta TI: socket %s, mfunc 0x%08x, devctl 0x%02x\n",
- pci_name(socket->dev), mfunc, devctl);
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "TI: mfunc 0x%08x, devctl 0x%02x\n",
+ mfunc, devctl);
/* if IRQs are configured as tied, align irq of func1 with func0 */
sysctl = config_readl(socket, TI113X_SYSTEM_CONTROL);
@@ -533,9 +535,8 @@ static void ti12xx_irqroute_func1(struct yenta_socket *socket)
* We're here which means PCI interrupts are _not_ delivered. try to
* find the right setting
*/
- printk(KERN_INFO "Yenta TI: socket %s probing PCI interrupt failed, trying to fix\n",
- pci_name(socket->dev));
-
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "TI: probing PCI interrupt failed, trying to fix\n");
/* if all serial: set INTRTIE, probe again */
if ((devctl & TI113X_DCR_IMODE_MASK) == TI12XX_DCR_IMODE_ALL_SERIAL) {
@@ -544,8 +545,8 @@ static void ti12xx_irqroute_func1(struct yenta_socket *socket)
if (ti12xx_tie_interrupts(socket, &old_irq)) {
pci_irq_status = yenta_probe_cb_irq(socket);
if (pci_irq_status == 1) {
- printk(KERN_INFO "Yenta TI: socket %s all-serial interrupts, tied ok\n",
- pci_name(socket->dev));
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "TI: all-serial interrupts, tied ok\n");
goto out;
}
@@ -582,8 +583,8 @@ static void ti12xx_irqroute_func1(struct yenta_socket *socket)
pci_irq_status = yenta_probe_cb_irq(socket);
if (pci_irq_status == 1) {
- printk(KERN_INFO "Yenta TI: socket %s parallel PCI interrupts ok\n",
- pci_name(socket->dev));
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "TI: parallel PCI interrupts ok\n");
goto out;
}
@@ -593,13 +594,13 @@ static void ti12xx_irqroute_func1(struct yenta_socket *socket)
if (pci_irq_status == -1)
goto out;
}
-
+
/* still nothing: set INTRTIE */
if (ti12xx_tie_interrupts(socket, &old_irq)) {
pci_irq_status = yenta_probe_cb_irq(socket);
if (pci_irq_status == 1) {
- printk(KERN_INFO "Yenta TI: socket %s parallel PCI interrupts, tied ok\n",
- pci_name(socket->dev));
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "TI: parallel PCI interrupts, tied ok\n");
goto out;
}
@@ -610,8 +611,8 @@ static void ti12xx_irqroute_func1(struct yenta_socket *socket)
out:
if (pci_irq_status < 1) {
socket->cb_irq = 0;
- printk(KERN_INFO "Yenta TI: socket %s no PCI interrupts. Fish. Please report.\n",
- pci_name(socket->dev));
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "TI: no PCI interrupts. Fish. Please report.\n");
}
}
@@ -815,11 +816,13 @@ static int ti12xx_override(struct yenta_socket *socket)
/* make sure that memory burst is active */
val_orig = val = config_readl(socket, TI113X_SYSTEM_CONTROL);
if (disable_clkrun && PCI_FUNC(socket->dev->devfn) == 0) {
- printk(KERN_INFO "Yenta: Disabling CLKRUN feature\n");
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "Disabling CLKRUN feature\n");
val |= TI113X_SCR_KEEPCLK;
}
if (!(val & TI122X_SCR_MRBURSTUP)) {
- printk(KERN_INFO "Yenta: Enabling burst memory read transactions\n");
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "Enabling burst memory read transactions\n");
val |= TI122X_SCR_MRBURSTUP;
}
if (val_orig != val)
@@ -830,10 +833,12 @@ static int ti12xx_override(struct yenta_socket *socket)
* CSC interrupts to PCI rather than INTVAL.
*/
val = config_readb(socket, TI1250_DIAGNOSTIC);
- printk(KERN_INFO "Yenta: Using %s to route CSC interrupts to PCI\n",
- (val & TI1250_DIAG_PCI_CSC) ? "CSCINT" : "INTVAL");
- printk(KERN_INFO "Yenta: Routing CardBus interrupts to %s\n",
- (val & TI1250_DIAG_PCI_IREQ) ? "PCI" : "ISA");
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "Using %s to route CSC interrupts to PCI\n",
+ (val & TI1250_DIAG_PCI_CSC) ? "CSCINT" : "INTVAL");
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "Routing CardBus interrupts to %s\n",
+ (val & TI1250_DIAG_PCI_IREQ) ? "PCI" : "ISA");
/* do irqrouting, depending on function */
if (PCI_FUNC(socket->dev->devfn) == 0)
@@ -858,8 +863,9 @@ static int ti1250_override(struct yenta_socket *socket)
diag |= TI1250_DIAG_PCI_CSC | TI1250_DIAG_PCI_IREQ;
if (diag != old) {
- printk(KERN_INFO "Yenta: adjusting diagnostic: %02x -> %02x\n",
- old, diag);
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "adjusting diagnostic: %02x -> %02x\n",
+ old, diag);
config_writeb(socket, TI1250_DIAGNOSTIC, diag);
}
@@ -924,7 +930,9 @@ static void ene_tune_bridge(struct pcmcia_socket *sock, struct pci_bus *bus)
/* default to clear TLTEnable bit, old behaviour */
test_c9 &= ~ENE_TEST_C9_TLTENABLE;
- printk(KERN_INFO "yenta EnE: chaning testregister 0xC9, %02x -> %02x\n", old_c9, test_c9);
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "EnE: chaning testregister 0xC9, %02x -> %02x\n",
+ old_c9, test_c9);
config_writeb(socket, ENE_TEST_C9, test_c9);
}
diff --git a/drivers/pcmcia/yenta_socket.c b/drivers/pcmcia/yenta_socket.c
index 0ab1fb65cdc..3ecd7c99d8e 100644
--- a/drivers/pcmcia/yenta_socket.c
+++ b/drivers/pcmcia/yenta_socket.c
@@ -38,11 +38,7 @@ static int pwr_irqs_off;
module_param(pwr_irqs_off, bool, 0644);
MODULE_PARM_DESC(pwr_irqs_off, "Force IRQs off during power-on of slot. Use only when seeing IRQ storms!");
-#if 0
-#define debug(x,args...) printk(KERN_DEBUG "%s: " x, __func__ , ##args)
-#else
-#define debug(x,args...)
-#endif
+#define debug(x, s, args...) dev_dbg(&s->dev->dev, x, ##args)
/* Don't ask.. */
#define to_cycles(ns) ((ns)/120)
@@ -69,13 +65,13 @@ MODULE_PARM_DESC (override_bios, "yenta ignore bios resource allocation");
static inline u32 cb_readl(struct yenta_socket *socket, unsigned reg)
{
u32 val = readl(socket->base + reg);
- debug("%p %04x %08x\n", socket, reg, val);
+ debug("%04x %08x\n", socket, reg, val);
return val;
}
static inline void cb_writel(struct yenta_socket *socket, unsigned reg, u32 val)
{
- debug("%p %04x %08x\n", socket, reg, val);
+ debug("%04x %08x\n", socket, reg, val);
writel(val, socket->base + reg);
readl(socket->base + reg); /* avoid problems with PCI write posting */
}
@@ -84,7 +80,7 @@ static inline u8 config_readb(struct yenta_socket *socket, unsigned offset)
{
u8 val;
pci_read_config_byte(socket->dev, offset, &val);
- debug("%p %04x %02x\n", socket, offset, val);
+ debug("%04x %02x\n", socket, offset, val);
return val;
}
@@ -92,7 +88,7 @@ static inline u16 config_readw(struct yenta_socket *socket, unsigned offset)
{
u16 val;
pci_read_config_word(socket->dev, offset, &val);
- debug("%p %04x %04x\n", socket, offset, val);
+ debug("%04x %04x\n", socket, offset, val);
return val;
}
@@ -100,32 +96,32 @@ static inline u32 config_readl(struct yenta_socket *socket, unsigned offset)
{
u32 val;
pci_read_config_dword(socket->dev, offset, &val);
- debug("%p %04x %08x\n", socket, offset, val);
+ debug("%04x %08x\n", socket, offset, val);
return val;
}
static inline void config_writeb(struct yenta_socket *socket, unsigned offset, u8 val)
{
- debug("%p %04x %02x\n", socket, offset, val);
+ debug("%04x %02x\n", socket, offset, val);
pci_write_config_byte(socket->dev, offset, val);
}
static inline void config_writew(struct yenta_socket *socket, unsigned offset, u16 val)
{
- debug("%p %04x %04x\n", socket, offset, val);
+ debug("%04x %04x\n", socket, offset, val);
pci_write_config_word(socket->dev, offset, val);
}
static inline void config_writel(struct yenta_socket *socket, unsigned offset, u32 val)
{
- debug("%p %04x %08x\n", socket, offset, val);
+ debug("%04x %08x\n", socket, offset, val);
pci_write_config_dword(socket->dev, offset, val);
}
static inline u8 exca_readb(struct yenta_socket *socket, unsigned reg)
{
u8 val = readb(socket->base + 0x800 + reg);
- debug("%p %04x %02x\n", socket, reg, val);
+ debug("%04x %02x\n", socket, reg, val);
return val;
}
@@ -134,20 +130,20 @@ static inline u8 exca_readw(struct yenta_socket *socket, unsigned reg)
u16 val;
val = readb(socket->base + 0x800 + reg);
val |= readb(socket->base + 0x800 + reg + 1) << 8;
- debug("%p %04x %04x\n", socket, reg, val);
+ debug("%04x %04x\n", socket, reg, val);
return val;
}
static inline void exca_writeb(struct yenta_socket *socket, unsigned reg, u8 val)
{
- debug("%p %04x %02x\n", socket, reg, val);
+ debug("%04x %02x\n", socket, reg, val);
writeb(val, socket->base + 0x800 + reg);
readb(socket->base + 0x800 + reg); /* PCI write posting... */
}
static void exca_writew(struct yenta_socket *socket, unsigned reg, u16 val)
{
- debug("%p %04x %04x\n", socket, reg, val);
+ debug("%04x %04x\n", socket, reg, val);
writeb(val, socket->base + 0x800 + reg);
writeb(val >> 8, socket->base + 0x800 + reg + 1);
@@ -207,7 +203,7 @@ static int yenta_get_status(struct pcmcia_socket *sock, unsigned int *value)
if (state & CB_CBCARD) {
- val |= SS_CARDBUS;
+ val |= SS_CARDBUS;
val |= (state & CB_CARDSTS) ? SS_STSCHG : 0;
val |= (state & (CB_CDETECT1 | CB_CDETECT2)) ? 0 : SS_DETECT;
val |= (state & CB_PWRCYCLE) ? SS_POWERON | SS_READY : 0;
@@ -650,8 +646,10 @@ static int yenta_allocate_res(struct yenta_socket *socket, int nr, unsigned type
root = pci_find_parent_resource(socket->dev, res);
if (root && (request_resource(root, res) == 0))
return 0;
- printk(KERN_INFO "yenta %s: Preassigned resource %d busy or not available, reconfiguring...\n",
- pci_name(socket->dev), nr);
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "Preassigned resource %d busy or not available, "
+ "reconfiguring...\n",
+ nr);
}
if (type & IORESOURCE_IO) {
@@ -674,8 +672,9 @@ static int yenta_allocate_res(struct yenta_socket *socket, int nr, unsigned type
return 1;
}
- printk(KERN_INFO "yenta %s: no resource of type %x available, trying to continue...\n",
- pci_name(socket->dev), type);
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "no resource of type %x available, trying to continue...\n",
+ type);
res->start = res->end = res->flags = 0;
return 0;
}
@@ -923,7 +922,8 @@ static int yenta_probe_cb_irq(struct yenta_socket *socket)
socket->probe_status = 0;
if (request_irq(socket->cb_irq, yenta_probe_handler, IRQF_SHARED, "yenta", socket)) {
- printk(KERN_WARNING "Yenta: request_irq() in yenta_probe_cb_irq() failed!\n");
+ dev_printk(KERN_WARNING, &socket->dev->dev,
+ "request_irq() in yenta_probe_cb_irq() failed!\n");
return -1;
}
@@ -960,8 +960,9 @@ static void yenta_get_socket_capabilities(struct yenta_socket *socket, u32 isa_i
else
socket->socket.irq_mask = 0;
- printk(KERN_INFO "Yenta: ISA IRQ mask 0x%04x, PCI irq %d\n",
- socket->socket.irq_mask, socket->cb_irq);
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "ISA IRQ mask 0x%04x, PCI irq %d\n",
+ socket->socket.irq_mask, socket->cb_irq);
}
/*
@@ -1051,8 +1052,9 @@ static void yenta_fixup_parent_bridge(struct pci_bus *cardbus_bridge)
/* Show that the wanted subordinate number is not possible: */
if (cardbus_bridge->subordinate > upper_limit)
- printk(KERN_WARNING "Yenta: Upper limit for fixing this "
- "bridge's parent bridge: #%02x\n", upper_limit);
+ dev_printk(KERN_WARNING, &cardbus_bridge->dev,
+ "Upper limit for fixing this "
+ "bridge's parent bridge: #%02x\n", upper_limit);
/* If we have room to increase the bridge's subordinate number, */
if (bridge_to_fix->subordinate < upper_limit) {
@@ -1061,10 +1063,11 @@ static void yenta_fixup_parent_bridge(struct pci_bus *cardbus_bridge)
unsigned char subordinate_to_assign =
min(cardbus_bridge->subordinate, upper_limit);
- printk(KERN_INFO "Yenta: Raising subordinate bus# of parent "
- "bus (#%02x) from #%02x to #%02x\n",
- bridge_to_fix->number,
- bridge_to_fix->subordinate, subordinate_to_assign);
+ dev_printk(KERN_INFO, &bridge_to_fix->dev,
+ "Raising subordinate bus# of parent "
+ "bus (#%02x) from #%02x to #%02x\n",
+ bridge_to_fix->number,
+ bridge_to_fix->subordinate, subordinate_to_assign);
/* Save the new subordinate in the bus struct of the bridge */
bridge_to_fix->subordinate = subordinate_to_assign;
@@ -1091,8 +1094,8 @@ static int __devinit yenta_probe (struct pci_dev *dev, const struct pci_device_i
* Bail out if so.
*/
if (!dev->subordinate) {
- printk(KERN_ERR "Yenta: no bus associated with %s! "
- "(try 'pci=assign-busses')\n", pci_name(dev));
+ dev_printk(KERN_ERR, &dev->dev, "no bus associated! "
+ "(try 'pci=assign-busses')\n");
return -ENODEV;
}
@@ -1127,7 +1130,7 @@ static int __devinit yenta_probe (struct pci_dev *dev, const struct pci_device_i
goto disable;
if (!pci_resource_start(dev, 0)) {
- printk(KERN_ERR "No cardbus resource!\n");
+ dev_printk(KERN_ERR, &dev->dev, "No cardbus resource!\n");
ret = -ENODEV;
goto release;
}
@@ -1146,8 +1149,8 @@ static int __devinit yenta_probe (struct pci_dev *dev, const struct pci_device_i
* report the subsystem vendor and device for help debugging
* the irq stuff...
*/
- printk(KERN_INFO "Yenta: CardBus bridge found at %s [%04x:%04x]\n",
- pci_name(dev), dev->subsystem_vendor, dev->subsystem_device);
+ dev_printk(KERN_INFO, &dev->dev, "CardBus bridge found [%04x:%04x]\n",
+ dev->subsystem_vendor, dev->subsystem_device);
yenta_config_init(socket);
@@ -1179,8 +1182,12 @@ static int __devinit yenta_probe (struct pci_dev *dev, const struct pci_device_i
socket->poll_timer.data = (unsigned long)socket;
socket->poll_timer.expires = jiffies + HZ;
add_timer(&socket->poll_timer);
- printk(KERN_INFO "Yenta: no PCI IRQ, CardBus support disabled for this socket.\n"
- KERN_INFO "Yenta: check your BIOS CardBus, BIOS IRQ or ACPI settings.\n");
+ dev_printk(KERN_INFO, &dev->dev,
+ "no PCI IRQ, CardBus support disabled for this "
+ "socket.\n");
+ dev_printk(KERN_INFO, &dev->dev,
+ "check your BIOS CardBus, BIOS IRQ or ACPI "
+ "settings.\n");
} else {
socket->socket.features |= SS_CAP_CARDBUS;
}
@@ -1188,7 +1195,8 @@ static int __devinit yenta_probe (struct pci_dev *dev, const struct pci_device_i
/* Figure out what the dang thing can do for the PCMCIA layer... */
yenta_interrogate(socket);
yenta_get_socket_capabilities(socket, isa_interrupts);
- printk(KERN_INFO "Socket status: %08x\n", cb_readl(socket, CB_SOCKET_STATE));
+ dev_printk(KERN_INFO, &dev->dev,
+ "Socket status: %08x\n", cb_readl(socket, CB_SOCKET_STATE));
yenta_fixup_parent_bridge(dev->subordinate);
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-23 03:14:15 +0000