diff options
Diffstat (limited to 'drivers')
53 files changed, 178 insertions, 150 deletions
diff --git a/drivers/acpi/sleep/poweroff.c b/drivers/acpi/sleep/poweroff.c index 186b182c582..f93d2ee5480 100644 --- a/drivers/acpi/sleep/poweroff.c +++ b/drivers/acpi/sleep/poweroff.c @@ -55,7 +55,11 @@ void acpi_power_off(void) static int acpi_shutdown(struct sys_device *x) { - return acpi_sleep_prepare(ACPI_STATE_S5); + if (system_state == SYSTEM_POWER_OFF) { + /* Prepare if we are going to power off the system */ + return acpi_sleep_prepare(ACPI_STATE_S5); + } + return 0; } static struct sysdev_class acpi_sysclass = { diff --git a/drivers/block/cfq-iosched.c b/drivers/block/cfq-iosched.c index 2435a7c99b2..cd056e7e64e 100644 --- a/drivers/block/cfq-iosched.c +++ b/drivers/block/cfq-iosched.c @@ -47,7 +47,7 @@ static int cfq_slice_idle = HZ / 100; /* * disable queueing at the driver/hardware level */ -static int cfq_max_depth = 1; +static int cfq_max_depth = 2; /* * for the hash of cfqq inside the cfqd @@ -385,9 +385,15 @@ cfq_choose_req(struct cfq_data *cfqd, struct cfq_rq *crq1, struct cfq_rq *crq2) return crq2; if (crq2 == NULL) return crq1; - if (cfq_crq_requeued(crq1)) + + if (cfq_crq_requeued(crq1) && !cfq_crq_requeued(crq2)) return crq1; - if (cfq_crq_requeued(crq2)) + else if (cfq_crq_requeued(crq2) && !cfq_crq_requeued(crq1)) + return crq2; + + if (cfq_crq_is_sync(crq1) && !cfq_crq_is_sync(crq2)) + return crq1; + else if (cfq_crq_is_sync(crq2) && !cfq_crq_is_sync(crq1)) return crq2; s1 = crq1->request->sector; @@ -1769,18 +1775,23 @@ static void cfq_crq_enqueued(struct cfq_data *cfqd, struct cfq_queue *cfqq, struct cfq_rq *crq) { - const int sync = cfq_crq_is_sync(crq); + struct cfq_io_context *cic; cfqq->next_crq = cfq_choose_req(cfqd, cfqq->next_crq, crq); - if (sync) { - struct cfq_io_context *cic = crq->io_context; + /* + * we never wait for an async request and we don't allow preemption + * of an async request. so just return early + */ + if (!cfq_crq_is_sync(crq)) + return; - cfq_update_io_thinktime(cfqd, cic); - cfq_update_idle_window(cfqd, cfqq, cic); + cic = crq->io_context; - cic->last_queue = jiffies; - } + cfq_update_io_thinktime(cfqd, cic); + cfq_update_idle_window(cfqd, cfqq, cic); + + cic->last_queue = jiffies; if (cfqq == cfqd->active_queue) { /* diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index 4f27e551929..7333b41d422 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -80,7 +80,7 @@ config SERIAL_NONSTANDARD config COMPUTONE tristate "Computone IntelliPort Plus serial support" - depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP + depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP && (BROKEN || !SPARC32) ---help--- This driver supports the entire family of Intelliport II/Plus controllers with the exception of the MicroChannel controllers and @@ -138,7 +138,7 @@ config CYZ_INTR config DIGIEPCA tristate "Digiboard Intelligent Async Support" - depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP + depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP && (!64BIT || BROKEN) ---help--- This is a driver for Digi International's Xx, Xeve, and Xem series of cards which provide multiple serial ports. You would need @@ -208,7 +208,7 @@ config SYNCLINK config SYNCLINKMP tristate "SyncLink Multiport support" - depends on SERIAL_NONSTANDARD + depends on SERIAL_NONSTANDARD && (BROKEN || !SPARC32) help Enable support for the SyncLink Multiport (2 or 4 ports) serial adapter, running asynchronous and HDLC communications up @@ -735,7 +735,7 @@ config SGI_IP27_RTC config GEN_RTC tristate "Generic /dev/rtc emulation" - depends on RTC!=y && !IA64 && !ARM && !PPC64 + depends on RTC!=y && !IA64 && !ARM && !PPC64 && !M32R && !SPARC32 ---help--- If you say Y here and create a character special file /dev/rtc with major number 10 and minor number 135 using mknod ("man mknod"), you diff --git a/drivers/char/vt.c b/drivers/char/vt.c index 30d96739fb2..665103ccaee 100644 --- a/drivers/char/vt.c +++ b/drivers/char/vt.c @@ -2433,7 +2433,7 @@ static int con_open(struct tty_struct *tty, struct file *filp) int ret = 0; acquire_console_sem(); - if (tty->count == 1) { + if (tty->driver_data == NULL) { ret = vc_allocate(currcons); if (ret == 0) { struct vc_data *vc = vc_cons[currcons].d; diff --git a/drivers/hwmon/adm1026.c b/drivers/hwmon/adm1026.c index 4fa17c76eea..c8a7f47911f 100644 --- a/drivers/hwmon/adm1026.c +++ b/drivers/hwmon/adm1026.c @@ -325,7 +325,7 @@ int adm1026_attach_adapter(struct i2c_adapter *adapter) int adm1026_detach_client(struct i2c_client *client) { i2c_detach_client(client); - kfree(client); + kfree(i2c_get_clientdata(client)); return 0; } @@ -1691,7 +1691,7 @@ int adm1026_detect(struct i2c_adapter *adapter, int address, /* Error out and cleanup code */ exitfree: - kfree(new_client); + kfree(data); exit: return err; } diff --git a/drivers/hwmon/adm1031.c b/drivers/hwmon/adm1031.c index 9168e983ca1..93625095727 100644 --- a/drivers/hwmon/adm1031.c +++ b/drivers/hwmon/adm1031.c @@ -834,7 +834,7 @@ static int adm1031_detect(struct i2c_adapter *adapter, int address, int kind) return 0; exit_free: - kfree(new_client); + kfree(data); exit: return err; } @@ -845,7 +845,7 @@ static int adm1031_detach_client(struct i2c_client *client) if ((ret = i2c_detach_client(client)) != 0) { return ret; } - kfree(client); + kfree(i2c_get_clientdata(client)); return 0; } diff --git a/drivers/hwmon/adm9240.c b/drivers/hwmon/adm9240.c index 5c68e9c311a..ce2a6eb93f6 100644 --- a/drivers/hwmon/adm9240.c +++ b/drivers/hwmon/adm9240.c @@ -616,7 +616,7 @@ static int adm9240_detect(struct i2c_adapter *adapter, int address, int kind) return 0; exit_free: - kfree(new_client); + kfree(data); exit: return err; } diff --git a/drivers/hwmon/fscpos.c b/drivers/hwmon/fscpos.c index 270015b626a..301ae98bd0a 100644 --- a/drivers/hwmon/fscpos.c +++ b/drivers/hwmon/fscpos.c @@ -167,7 +167,7 @@ static ssize_t set_temp_reset(struct i2c_client *client, struct fscpos_data "experience to the module author.\n"); /* Supported value: 2 (clears the status) */ - fscpos_write_value(client, FSCPOS_REG_TEMP_STATE[nr], 2); + fscpos_write_value(client, FSCPOS_REG_TEMP_STATE[nr - 1], 2); return count; } diff --git a/drivers/hwmon/smsc47b397.c b/drivers/hwmon/smsc47b397.c index 251ac265955..fdeeb3ab6f2 100644 --- a/drivers/hwmon/smsc47b397.c +++ b/drivers/hwmon/smsc47b397.c @@ -298,7 +298,7 @@ static int smsc47b397_detect(struct i2c_adapter *adapter, int addr, int kind) return 0; error_free: - kfree(new_client); + kfree(data); error_release: release_region(addr, SMSC_EXTENT); return err; diff --git a/drivers/hwmon/smsc47m1.c b/drivers/hwmon/smsc47m1.c index 897117a7213..7166ad0b2fd 100644 --- a/drivers/hwmon/smsc47m1.c +++ b/drivers/hwmon/smsc47m1.c @@ -495,7 +495,7 @@ static int smsc47m1_detect(struct i2c_adapter *adapter, int address, int kind) return 0; error_free: - kfree(new_client); + kfree(data); error_release: release_region(address, SMSC_EXTENT); return err; diff --git a/drivers/ieee1394/ohci1394.c b/drivers/ieee1394/ohci1394.c index b12a970cc9a..27018c8efc2 100644 --- a/drivers/ieee1394/ohci1394.c +++ b/drivers/ieee1394/ohci1394.c @@ -478,7 +478,6 @@ static void ohci_initialize(struct ti_ohci *ohci) int num_ports, i; spin_lock_init(&ohci->phy_reg_lock); - spin_lock_init(&ohci->event_lock); /* Put some defaults to these undefined bus options */ buf = reg_read(ohci, OHCI1394_BusOptions); @@ -3402,7 +3401,14 @@ static int __devinit ohci1394_pci_probe(struct pci_dev *dev, /* We hopefully don't have to pre-allocate IT DMA like we did * for IR DMA above. Allocate it on-demand and mark inactive. */ ohci->it_legacy_context.ohci = NULL; + spin_lock_init(&ohci->event_lock); + /* + * interrupts are disabled, all right, but... due to SA_SHIRQ we + * might get called anyway. We'll see no event, of course, but + * we need to get to that "no event", so enough should be initialized + * by that point. + */ if (request_irq(dev->irq, ohci_irq_handler, SA_SHIRQ, OHCI1394_DRIVER_NAME, ohci)) FAIL(-ENOMEM, "Failed to allocate shared interrupt %d", dev->irq); diff --git a/drivers/infiniband/Kconfig b/drivers/infiniband/Kconfig index 79c8e2dd9c3..32cdfb30e9b 100644 --- a/drivers/infiniband/Kconfig +++ b/drivers/infiniband/Kconfig @@ -1,6 +1,7 @@ menu "InfiniBand support" config INFINIBAND + depends on PCI || BROKEN tristate "InfiniBand support" ---help--- Core support for InfiniBand (IB). Make sure to also select diff --git a/drivers/infiniband/core/uverbs_main.c b/drivers/infiniband/core/uverbs_main.c index eb99e693dec..5f6e9ea29cd 100644 --- a/drivers/infiniband/core/uverbs_main.c +++ b/drivers/infiniband/core/uverbs_main.c @@ -130,13 +130,14 @@ static int ib_dealloc_ucontext(struct ib_ucontext *context) list_for_each_entry_safe(uobj, tmp, &context->mr_list, list) { struct ib_mr *mr = idr_find(&ib_uverbs_mr_idr, uobj->id); + struct ib_device *mrdev = mr->device; struct ib_umem_object *memobj; idr_remove(&ib_uverbs_mr_idr, uobj->id); ib_dereg_mr(mr); memobj = container_of(uobj, struct ib_umem_object, uobject); - ib_umem_release_on_close(mr->device, &memobj->umem); + ib_umem_release_on_close(mrdev, &memobj->umem); list_del(&uobj->list); kfree(memobj); diff --git a/drivers/isdn/capi/capifs.c b/drivers/isdn/capi/capifs.c index f8570fd9d2a..3abd7fc6e5e 100644 --- a/drivers/isdn/capi/capifs.c +++ b/drivers/isdn/capi/capifs.c @@ -191,8 +191,10 @@ static int __init capifs_init(void) err = register_filesystem(&capifs_fs_type); if (!err) { capifs_mnt = kern_mount(&capifs_fs_type); - if (IS_ERR(capifs_mnt)) + if (IS_ERR(capifs_mnt)) { err = PTR_ERR(capifs_mnt); + unregister_filesystem(&capifs_fs_type); + } } if (!err) printk(KERN_NOTICE "capifs: Rev %s\n", rev); diff --git a/drivers/isdn/hisax/Kconfig b/drivers/isdn/hisax/Kconfig index 6c7b8bffc6f..801c98f30e5 100644 --- a/drivers/isdn/hisax/Kconfig +++ b/drivers/isdn/hisax/Kconfig @@ -134,6 +134,7 @@ config HISAX_AVM_A1 config HISAX_FRITZPCI bool "AVM PnP/PCI (Fritz!PnP/PCI)" + depends on BROKEN || !PPC64 help This enables HiSax support for the AVM "Fritz!PnP" and "Fritz!PCI". See <file:Documentation/isdn/README.HiSax> on how to configure it. diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig index 65ab64c43b3..bc3e096d84f 100644 --- a/drivers/macintosh/Kconfig +++ b/drivers/macintosh/Kconfig @@ -103,7 +103,7 @@ config PMAC_MEDIABAY # on non-powerbook machines (but only on PMU based ones AFAIK) config PMAC_BACKLIGHT bool "Backlight control for LCD screens" - depends on ADB_PMU + depends on ADB_PMU && (BROKEN || !PPC64) help Say Y here to build in code to manage the LCD backlight on a Macintosh PowerBook. With this code, the backlight will be turned diff --git a/drivers/md/md.c b/drivers/md/md.c index d4c275604a3..20ca80b7dc2 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -256,8 +256,7 @@ static inline void mddev_unlock(mddev_t * mddev) { up(&mddev->reconfig_sem); - if (mddev->thread) - md_wakeup_thread(mddev->thread); + md_wakeup_thread(mddev->thread); } mdk_rdev_t * find_rdev_nr(mddev_t *mddev, int nr) @@ -1690,6 +1689,7 @@ static int do_md_run(mddev_t * mddev) mddev->pers = pers[pnum]; spin_unlock(&pers_lock); + mddev->recovery = 0; mddev->resync_max_sectors = mddev->size << 1; /* may be over-ridden by personality */ /* before we start the array running, initialise the bitmap */ @@ -1714,6 +1714,7 @@ static int do_md_run(mddev_t * mddev) mddev->in_sync = 1; set_bit(MD_RECOVERY_NEEDED, &mddev->recovery); + md_wakeup_thread(mddev->thread); if (mddev->sb_dirty) md_update_sb(mddev); @@ -2236,8 +2237,7 @@ static int add_new_disk(mddev_t * mddev, mdu_disk_info_t *info) export_rdev(rdev); set_bit(MD_RECOVERY_NEEDED, &mddev->recovery); - if (mddev->thread) - md_wakeup_thread(mddev->thread); + md_wakeup_thread(mddev->thread); return err; } @@ -4012,3 +4012,4 @@ EXPORT_SYMBOL(md_print_devices); EXPORT_SYMBOL(md_check_recovery); MODULE_LICENSE("GPL"); MODULE_ALIAS("md"); +MODULE_ALIAS_BLOCKDEV_MAJOR(MD_MAJOR); diff --git a/drivers/media/dvb/dvb-usb/dibusb-common.c b/drivers/media/dvb/dvb-usb/dibusb-common.c index 63b626f70c8..9b9d6f8ee74 100644 --- a/drivers/media/dvb/dvb-usb/dibusb-common.c +++ b/drivers/media/dvb/dvb-usb/dibusb-common.c @@ -70,13 +70,22 @@ EXPORT_SYMBOL(dibusb_power_ctrl); int dibusb2_0_streaming_ctrl(struct dvb_usb_device *d, int onoff) { - u8 b[2]; - b[0] = DIBUSB_REQ_SET_IOCTL; - b[1] = onoff ? DIBUSB_IOCTL_CMD_ENABLE_STREAM : DIBUSB_IOCTL_CMD_DISABLE_STREAM; + u8 b[3] = { 0 }; + int ret; + + if ((ret = dibusb_streaming_ctrl(d,onoff)) < 0) + return ret; - dvb_usb_generic_write(d,b,3); + if (onoff) { + b[0] = DIBUSB_REQ_SET_STREAMING_MODE; + b[1] = 0x00; + if ((ret = dvb_usb_generic_write(d,b,2)) < 0) + return ret; + } - return dibusb_streaming_ctrl(d,onoff); + b[0] = DIBUSB_REQ_SET_IOCTL; + b[1] = onoff ? DIBUSB_IOCTL_CMD_ENABLE_STREAM : DIBUSB_IOCTL_CMD_DISABLE_STREAM; + return dvb_usb_generic_write(d,b,3); } EXPORT_SYMBOL(dibusb2_0_streaming_ctrl); diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-dvb.c b/drivers/media/dvb/dvb-usb/dvb-usb-dvb.c index 3491ff40885..6fa92100248 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-dvb.c +++ b/drivers/media/dvb/dvb-usb/dvb-usb-dvb.c @@ -23,12 +23,12 @@ static int dvb_usb_ctrl_feed(struct dvb_demux_feed *dvbdmxfeed, int onoff) */ if (newfeedcount == 0) { deb_ts("stop feeding\n"); + dvb_usb_urb_kill(d); if (d->props.streaming_ctrl != NULL) if ((ret = d->props.streaming_ctrl(d,0))) err("error while stopping stream."); - dvb_usb_urb_kill(d); } d->feedcount = newfeedcount; @@ -44,6 +44,8 @@ static int dvb_usb_ctrl_feed(struct dvb_demux_feed *dvbdmxfeed, int onoff) * for reception. */ if (d->feedcount == onoff && d->feedcount > 0) { + deb_ts("submitting all URBs\n"); + dvb_usb_urb_submit(d); deb_ts("controlling pid parser\n"); if (d->props.caps & DVB_USB_HAS_PID_FILTER && @@ -59,7 +61,6 @@ static int dvb_usb_ctrl_feed(struct dvb_demux_feed *dvbdmxfeed, int onoff) return -ENODEV; } - dvb_usb_urb_submit(d); } return 0; } diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index ac81e5e01a9..3f574239609 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -356,7 +356,7 @@ config VIDEO_M32R_AR config VIDEO_M32R_AR_M64278 tristate "Use Colour AR module M64278(VGA)" - depends on VIDEO_M32R_AR + depends on VIDEO_M32R_AR && PLAT_M32700UT ---help--- Say Y here to use the Renesas M64278E-800 camera module, which supports VGA(640x480 pixcels) size of images. diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 8a835eb5880..8edb6936fb9 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -1145,7 +1145,7 @@ config IBMVETH be called ibmveth. config IBM_EMAC - tristate "IBM PPC4xx EMAC driver support" + bool "IBM PPC4xx EMAC driver support" depends on 4xx select CRC32 ---help--- @@ -1154,7 +1154,7 @@ config IBM_EMAC config IBM_EMAC_ERRMSG bool "Verbose error messages" - depends on IBM_EMAC + depends on IBM_EMAC && BROKEN config IBM_EMAC_RXB int "Number of receive buffers" diff --git a/drivers/net/hamradio/6pack.c b/drivers/net/hamradio/6pack.c index f9e3be96963..0b230222bfe 100644 --- a/drivers/net/hamradio/6pack.c +++ b/drivers/net/hamradio/6pack.c @@ -308,12 +308,6 @@ static int sp_set_mac_address(struct net_device *dev, void *addr) { struct sockaddr_ax25 *sa = addr; - if (sa->sax25_family != AF_AX25) - return -EINVAL; - - if (!sa->sax25_ndigis) - return -EINVAL; - spin_lock_irq(&dev->xmit_lock); memcpy(dev->dev_addr, &sa->sax25_call, AX25_ADDR_LEN); spin_unlock_irq(&dev->xmit_lock); @@ -668,6 +662,9 @@ static int sixpack_open(struct tty_struct *tty) netif_start_queue(dev); init_timer(&sp->tx_t); + sp->tx_t.function = sp_xmit_on_air; + sp->tx_t.data = (unsigned long) sp; + init_timer(&sp->resync_t); spin_unlock_bh(&sp->lock); diff --git a/drivers/net/ibm_emac/ibm_emac_core.c b/drivers/net/ibm_emac/ibm_emac_core.c index 6482d994d48..0de3bb90617 100644 --- a/drivers/net/ibm_emac/ibm_emac_core.c +++ b/drivers/net/ibm_emac/ibm_emac_core.c @@ -1253,7 +1253,7 @@ static int emac_init_tah(struct ocp_enet_private *fep) TAH_MR_CVR | TAH_MR_ST_768 | TAH_MR_TFS_10KB | TAH_MR_DTFP | TAH_MR_DIG); - iounmap(&tahp); + iounmap(tahp); return 0; } @@ -1712,11 +1712,10 @@ struct mal_commac_ops emac_commac_ops = { }; #ifdef CONFIG_NET_POLL_CONTROLLER -static int emac_netpoll(struct net_device *ndev) +static void emac_netpoll(struct net_device *ndev) { emac_rxeob_dev((void *)ndev, 0); emac_txeob_dev((void *)ndev, 0); - return 0; } #endif diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 01419aff333..6d4ab1e333b 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -66,8 +66,8 @@ #define DRV_MODULE_NAME "tg3" #define PFX DRV_MODULE_NAME ": " -#define DRV_MODULE_VERSION "3.36" -#define DRV_MODULE_RELDATE "August 19, 2005" +#define DRV_MODULE_VERSION "3.37" +#define DRV_MODULE_RELDATE "August 25, 2005" #define TG3_DEF_MAC_MODE 0 #define TG3_DEF_RX_MODE 0 @@ -7865,8 +7865,6 @@ static int tg3_test_loopback(struct tg3 *tp) err = -EIO; - tg3_abort_hw(tp, 1); - tg3_reset_hw(tp); mac_mode = (tp->mac_mode & ~MAC_MODE_PORT_MODE_MASK) | diff --git a/drivers/net/tokenring/Kconfig b/drivers/net/tokenring/Kconfig index 23d0fa4bbce..7e99e9f8045 100644 --- a/drivers/net/tokenring/Kconfig +++ b/drivers/net/tokenring/Kconfig @@ -84,7 +84,7 @@ config 3C359 config TMS380TR tristate "Generic TMS380 Token Ring ISA/PCI adapter support" - depends on TR && (PCI || ISA) + depends on TR && (PCI || ISA && ISA_DMA_API) select FW_LOADER ---help--- This driver provides generic support for token ring adapters diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig index 1d3231cc471..ec3f75a030d 100644 --- a/drivers/net/wireless/Kconfig +++ b/drivers/net/wireless/Kconfig @@ -270,7 +270,7 @@ config PCMCIA_HERMES config AIRO_CS tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards" - depends on NET_RADIO && PCMCIA + depends on NET_RADIO && PCMCIA && (BROKEN || !M32R) ---help--- This is the standard Linux driver to support Cisco/Aironet PCMCIA 802.11 wireless cards. This driver is the same as the Aironet diff --git a/drivers/parport/Kconfig b/drivers/parport/Kconfig index 16a2e6ae37f..725a14119f2 100644 --- a/drivers/parport/Kconfig +++ b/drivers/parport/Kconfig @@ -34,7 +34,7 @@ config PARPORT config PARPORT_PC tristate "PC-style hardware" - depends on PARPORT && (!SPARC64 || PCI) && !SPARC32 + depends on PARPORT && (!SPARC64 || PCI) && !SPARC32 && !M32R ---help--- You should say Y here if you have a PC-style parallel port. All IBM PC compatible computers and some Alphas have PC-style diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c index a2eebc6eaac..6d864c502a1 100644 --- a/drivers/pci/setup-bus.c +++ b/drivers/pci/setup-bus.c @@ -40,7 +40,7 @@ * FIXME: IO should be max 256 bytes. However, since we may * have a P2P bridge below a cardbus bridge, we need 4K. */ -#define CARDBUS_IO_SIZE (4096) +#define CARDBUS_IO_SIZE (256) #define CARDBUS_MEM_SIZE (32*1024*1024) static void __devinit diff --git a/drivers/pci/setup-res.c b/drivers/pci/setup-res.c index 84eedc96568..5598b4714f7 100644 --- a/drivers/pci/setup-res.c +++ b/drivers/pci/setup-res.c @@ -53,7 +53,9 @@ pci_update_resource(struct pci_dev *dev, struct resource *res, int resno) if (resno < 6) { reg = PCI_BASE_ADDRESS_0 + 4 * resno; } else if (resno == PCI_ROM_RESOURCE) { - new |= res->flags & IORESOURCE_ROM_ENABLE; + if (!(res->flags & IORESOURCE_ROM_ENABLE)) + return; + new |= PCI_ROM_ADDRESS_ENABLE; reg = dev->rom_base_reg; } else { /* Hmm, non-standard resource. */ diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c index 6f9fdb27640..599b116d974 100644 --- a/drivers/pcmcia/pcmcia_resource.c +++ b/drivers/pcmcia/pcmcia_resource.c @@ -41,6 +41,7 @@ module_param(io_speed, int, 0444); #ifdef CONFIG_PCMCIA_PROBE +#include <asm/irq.h> /* mask of IRQs already reserved by other cards, we should avoid using them */ static u8 pcmcia_used_irq[NR_IRQS]; #endif diff --git a/drivers/s390/cio/qdio.c b/drivers/s390/cio/qdio.c index d36258d6665..381f339e320 100644 --- a/drivers/s390/cio/qdio.c +++ b/drivers/s390/cio/qdio.c @@ -112,7 +112,7 @@ qdio_min(int a,int b) /***************** SCRUBBER HELPER ROUTINES **********************/ -static inline volatile __u64 +static inline __u64 qdio_get_micros(void) { return (get_clock() >> 10); /* time>>12 is microseconds */ @@ -230,7 +230,7 @@ qdio_siga_input(struct qdio_q *q) } /* locked by the locks in qdio_activate and qdio_cleanup */ -static __u32 * volatile +static __u32 volatile * qdio_get_indicator(void) { int i; diff --git a/drivers/s390/crypto/z90crypt.h b/drivers/s390/crypto/z90crypt.h index 82a1d97001d..0a3bb5a10dd 100644 --- a/drivers/s390/crypto/z90crypt.h +++ b/drivers/s390/crypto/z90crypt.h @@ -36,15 +36,6 @@ #define z90crypt_VARIANT 2 // 2 = added PCIXCC MCL3 and CEX2C support /** - * If we are not using the sparse checker, __user has no use. - */ -#ifdef __CHECKER__ -# define __user __attribute__((noderef, address_space(1))) -#else -# define __user -#endif - -/** * struct ica_rsa_modexpo * * Requirements: diff --git a/drivers/s390/scsi/zfcp_aux.c b/drivers/s390/scsi/zfcp_aux.c index e17b4d58a9f..bfe3ba73bc0 100644 --- a/drivers/s390/scsi/zfcp_aux.c +++ b/drivers/s390/scsi/zfcp_aux.c @@ -1299,13 +1299,10 @@ struct zfcp_port * zfcp_port_enqueue(struct zfcp_adapter *adapter, wwn_t wwpn, u32 status, u32 d_id) { - struct zfcp_port *port, *tmp_port; + struct zfcp_port *port; int check_wwpn; - scsi_id_t scsi_id; - int found; check_wwpn = !(status & ZFCP_STATUS_PORT_NO_WWPN); - /* * check that there is no port with this WWPN already in list */ @@ -1368,7 +1365,7 @@ zfcp_port_enqueue(struct zfcp_adapter *adapter, wwn_t wwpn, u32 status, } else { snprintf(port->sysfs_device.bus_id, BUS_ID_SIZE, "0x%016llx", wwpn); - port->sysfs_device.parent = &adapter->ccw_device->dev; + port->sysfs_device.parent = &adapter->ccw_device->dev; } port->sysfs_device.release = zfcp_sysfs_port_release; dev_set_drvdata(&port->sysfs_device, port); @@ -1388,24 +1385,8 @@ zfcp_port_enqueue(struct zfcp_adapter *adapter, wwn_t wwpn, u32 status, zfcp_port_get(port); - scsi_id = 1; - found = 0; write_lock_irq(&zfcp_data.config_lock); - list_for_each_entry(tmp_port, &adapter->port_list_head, list) { - if (atomic_test_mask(ZFCP_STATUS_PORT_NO_SCSI_ID, - &tmp_port->status)) - continue; - if (tmp_port->scsi_id != scsi_id) { - found = 1; - break; - } - scsi_id++; - } - port->scsi_id = scsi_id; - if (found) - list_add_tail(&port->list, &tmp_port->list); - else - list_add_tail(&port->list, &adapter->port_list_head); + list_add_tail(&port->list, &adapter->port_list_head); atomic_clear_mask(ZFCP_STATUS_COMMON_REMOVE, &port->status); atomic_set_mask(ZFCP_STATUS_COMMON_RUNNING, &port->status); if (d_id == ZFCP_DID_DIRECTORY_SERVICE) @@ -1427,6 +1408,9 @@ zfcp_port_dequeue(struct zfcp_port *port) list_del(&port->list); port->adapter->ports--; write_unlock_irq(&zfcp_data.config_lock); + if (port->rport) + fc_remote_port_delete(port->rport); + port->rport = NULL; zfcp_adapter_put(port->adapter); zfcp_sysfs_port_remove_files(&port->sysfs_device, atomic_read(&port->status)); diff --git a/drivers/s390/scsi/zfcp_ccw.c b/drivers/s390/scsi/zfcp_ccw.c index 0fc46381fc2..b30abab77da 100644 --- a/drivers/s390/scsi/zfcp_ccw.c +++ b/drivers/s390/scsi/zfcp_ccw.c @@ -202,9 +202,19 @@ static int zfcp_ccw_set_offline(struct ccw_device *ccw_device) { struct zfcp_adapter *adapter; + struct zfcp_port *port; + struct fc_rport *rport; down(&zfcp_data.config_sema); adapter = dev_get_drvdata(&ccw_device->dev); + /* might be racy, but we cannot take config_lock due to the fact that + fc_remote_port_delete might sleep */ + list_for_each_entry(port, &adapter->port_list_head, list) + if (port->rport) { + rport = port->rport; + port->rport = NULL; + fc_remote_port_delete(rport); + } zfcp_erp_adapter_shutdown(adapter, 0); zfcp_erp_wait(adapter); zfcp_adapter_scsi_unregister(adapter); diff --git a/drivers/s390/scsi/zfcp_def.h b/drivers/s390/scsi/zfcp_def.h index 4103b5be768..455e902533a 100644 --- a/drivers/s390/scsi/zfcp_def.h +++ b/drivers/s390/scsi/zfcp_def.h @@ -906,6 +906,7 @@ struct zfcp_adapter { */ struct zfcp_port { struct device sysfs_device; /* sysfs device */ + struct fc_rport *rport; /* rport of fc transport class */ struct list_head list; /* list of remote ports */ atomic_t refcount; /* reference count */ wait_queue_head_t remove_wq; /* can be used to wait for @@ -916,7 +917,6 @@ struct zfcp_port { list */ u32 units; /* # of logical units in list */ atomic_t status; /* status of this remote port */ - scsi_id_t scsi_id; /* own SCSI ID */ wwn_t wwnn; /* WWNN if known */ wwn_t wwpn; /* WWPN */ fc_id_t d_id; /* D_ID */ diff --git a/drivers/s390/scsi/zfcp_erp.c b/drivers/s390/scsi/zfcp_erp.c index 0cf31f7d1c0..cb4f612550b 100644 --- a/drivers/s390/scsi/zfcp_erp.c +++ b/drivers/s390/scsi/zfcp_erp.c @@ -3360,13 +3360,32 @@ zfcp_erp_action_cleanup(int action, struct zfcp_adapter *adapter, if ((result == ZFCP_ERP_SUCCEEDED) && (!atomic_test_mask(ZFCP_STATUS_UNIT_TEMPORARY, &unit->status)) - && (!unit->device)) - scsi_add_device(unit->port->adapter->scsi_host, 0, - unit->port->scsi_id, unit->scsi_lun); + && !unit->device + && port->rport) + scsi_add_device(port->adapter->scsi_host, 0, + port->rport->scsi_target_id, + unit->scsi_lun); zfcp_unit_put(unit); break; case ZFCP_ERP_ACTION_REOPEN_PORT_FORCED: case ZFCP_ERP_ACTION_REOPEN_PORT: + if ((result == ZFCP_ERP_SUCCEEDED) + && !atomic_test_mask(ZFCP_STATUS_PORT_NO_WWPN, + &port->status) + && !port->rport) { + struct fc_rport_identifiers ids; + ids.node_name = port->wwnn; + ids.port_name = port->wwpn; + ids.port_id = port->d_id; + ids.roles = FC_RPORT_ROLE_FCP_TARGET; + port->rport = + fc_remote_port_add(adapter->scsi_host, 0, &ids); + if (!port->rport) + ZFCP_LOG_NORMAL("failed registration of rport" + "(adapter %s, wwpn=0x%016Lx)\n", + zfcp_get_busid_by_port(port), + port->wwpn); + } zfcp_port_put(port); break; case ZFCP_ERP_ACTION_REOPEN_ADAPTER: diff --git a/drivers/s390/scsi/zfcp_ext.h b/drivers/s390/scsi/zfcp_ext.h index 42df7e57eea..cd98a2de9f8 100644 --- a/drivers/s390/scsi/zfcp_ext.h +++ b/drivers/s390/scsi/zfcp_ext.h @@ -143,6 +143,8 @@ extern int zfcp_scsi_command_async(struct zfcp_adapter *,struct zfcp_unit *, struct scsi_cmnd *, struct timer_list *); extern int zfcp_scsi_command_sync(struct zfcp_unit *, struct scsi_cmnd *, struct timer_list *); +extern void zfcp_set_fc_host_attrs(struct zfcp_adapter *); +extern void zfcp_set_fc_rport_attrs(struct zfcp_port *); extern struct scsi_transport_template *zfcp_transport_template; extern struct fc_function_template zfcp_transport_functions; diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c index 0d9f20edc49..c007b6424e7 100644 --- a/drivers/s390/scsi/zfcp_fsf.c +++ b/drivers/s390/scsi/zfcp_fsf.c @@ -2062,6 +2062,7 @@ zfcp_fsf_exchange_config_evaluate(struct zfcp_fsf_req *fsf_req, int xchg_ok) zfcp_erp_adapter_shutdown(adapter, 0); return -EIO; } + zfcp_set_fc_host_attrs(adapter); return 0; } diff --git a/drivers/s390/scsi/zfcp_scsi.c b/drivers/s390/scsi/zfcp_scsi.c index b61d309352c..31a76065cf2 100644 --- a/drivers/s390/scsi/zfcp_scsi.c +++ b/drivers/s390/scsi/zfcp_scsi.c @@ -389,7 +389,7 @@ zfcp_unit_lookup(struct zfcp_adapter *adapter, int channel, scsi_id_t id, struct zfcp_unit *unit, *retval = NULL; list_for_each_entry(port, &adapter->port_list_head, list) { - if (id != port->scsi_id) + if (!port->rport || (id != port->rport->scsi_target_id)) continue; list_for_each_entry(unit, &port->unit_list_head, list) { if (lun == unit->scsi_lun) { @@ -408,7 +408,7 @@ zfcp_port_lookup(struct zfcp_adapter *adapter, int channel, scsi_id_t id) struct zfcp_port *port; list_for_each_entry(port, &adapter->port_list_head, list) { - if (id == port->scsi_id) + if (port->rport && (id == port->rport->scsi_target_id)) return port; } return (struct zfcp_port *) NULL; @@ -634,7 +634,6 @@ zfcp_scsi_eh_device_reset_handler(struct scsi_cmnd *scpnt) { int retval; struct zfcp_unit *unit = (struct zfcp_unit *) scpnt->device->hostdata; - struct Scsi_Host *scsi_host = scpnt->device->host; if (!unit) { ZFCP_LOG_NORMAL("bug: Tried reset for nonexistent unit\n"); @@ -729,7 +728,6 @@ zfcp_scsi_eh_bus_reset_handler(struct scsi_cmnd *scpnt) { int retval = 0; struct zfcp_unit *unit; - struct Scsi_Host *scsi_host = scpnt->device->host; unit = (struct zfcp_unit *) scpnt->device->hostdata; ZFCP_LOG_NORMAL("bus reset because of problems with " @@ -753,7 +751,6 @@ zfcp_scsi_eh_host_reset_handler(struct scsi_cmnd *scpnt) { int retval = 0; struct zfcp_unit *unit; - struct Scsi_Host *scsi_host = scpnt->device->host; unit = (struct zfcp_unit *) scpnt->device->hostdata; ZFCP_LOG_NORMAL("host reset because of problems with " @@ -833,6 +830,7 @@ zfcp_adapter_scsi_unregister(struct zfcp_adapter *adapter) shost = adapter->scsi_host; if (!shost) return; + fc_remove_host(shost); scsi_remove_host(shost); scsi_host_put(shost); adapter->scsi_host = NULL; @@ -906,6 +904,18 @@ zfcp_get_node_name(struct scsi_target *starget) read_unlock_irqrestore(&zfcp_data.config_lock, flags); } +void +zfcp_set_fc_host_attrs(struct zfcp_adapter *adapter) +{ + struct Scsi_Host *shost = adapter->scsi_host; + + fc_host_node_name(shost) = adapter->wwnn; + fc_host_port_name(shost) = adapter->wwpn; + strncpy(fc_host_serial_number(shost), adapter->serial_number, + min(FC_SERIAL_NUMBER_SIZE, 32)); + fc_host_supported_classes(shost) = FC_COS_CLASS2 | FC_COS_CLASS3; +} + struct fc_function_template zfcp_transport_functions = { .get_starget_port_id = zfcp_get_port_id, .get_starget_port_name = zfcp_get_port_name, @@ -913,6 +923,11 @@ struct fc_function_template zfcp_transport_functions = { .show_starget_port_id = 1, .show_starget_port_name = 1, .show_starget_node_name = 1, + .show_rport_supported_classes = 1, + .show_host_node_name = 1, + .show_host_port_name = 1, + .show_host_supported_classes = 1, + .show_host_serial_number = 1, }; /** diff --git a/drivers/s390/scsi/zfcp_sysfs_port.c b/drivers/s390/scsi/zfcp_sysfs_port.c index 7a84c7d474d..c55e82d91de 100644 --- a/drivers/s390/scsi/zfcp_sysfs_port.c +++ b/drivers/s390/scsi/zfcp_sysfs_port.c @@ -67,7 +67,6 @@ static DEVICE_ATTR(_name, S_IRUGO, zfcp_sysfs_port_##_name##_show, NULL); ZFCP_DEFINE_PORT_ATTR(status, "0x%08x\n", atomic_read(&port->status)); ZFCP_DEFINE_PORT_ATTR(wwnn, "0x%016llx\n", port->wwnn); ZFCP_DEFINE_PORT_ATTR(d_id, "0x%06x\n", port->d_id); -ZFCP_DEFINE_PORT_ATTR(scsi_id, "0x%x\n", port->scsi_id); ZFCP_DEFINE_PORT_ATTR(in_recovery, "%d\n", atomic_test_mask (ZFCP_STATUS_COMMON_ERP_INUSE, &port->status)); ZFCP_DEFINE_PORT_ATTR(access_denied, "%d\n", atomic_test_mask @@ -263,7 +262,6 @@ static struct attribute_group zfcp_port_common_attr_group = { static struct attribute *zfcp_port_no_ns_attrs[] = { &dev_attr_unit_add.attr, &dev_attr_unit_remove.attr, - &dev_attr_scsi_id.attr, NULL }; diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index f1e8c4223ed..12c208fb18c 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -1696,7 +1696,7 @@ config TT_DMA_EMUL config MAC_SCSI bool "Macintosh NCR5380 SCSI" - depends on MAC && SCSI + depends on MAC && SCSI=y help This is the NCR 5380 SCSI controller included on most of the 68030 based Macintoshes. If you have one of these say Y and read the @@ -1717,7 +1717,7 @@ config SCSI_MAC_ESP config MVME147_SCSI bool "WD33C93 SCSI driver for MVME147" - depends on MVME147 && SCSI + depends on MVME147 && SCSI=y help Support for the on-board SCSI controller on the Motorola MVME147 single-board computer. @@ -1758,7 +1758,7 @@ config SUN3_SCSI config SUN3X_ESP bool "Sun3x ESP SCSI" - depends on SUN3X && SCSI + depends on SUN3X && SCSI=y help The ESP was an on-board SCSI controller used on Sun 3/80 machines. Say Y here to compile in support for it. diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index c5623694d10..e3b9692b968 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -1105,6 +1105,7 @@ MODULE_AUTHOR("Jeff Garzik"); MODULE_DESCRIPTION("AHCI SATA low-level driver"); MODULE_LICENSE("GPL"); MODULE_DEVICE_TABLE(pci, ahci_pci_tbl); +MODULE_VERSION(DRV_VERSION); module_init(ahci_init); module_exit(ahci_exit); diff --git a/drivers/scsi/arm/Kconfig b/drivers/scsi/arm/Kconfig index 54b32868aaf..13f23043c8a 100644 --- a/drivers/scsi/arm/Kconfig +++ b/drivers/scsi/arm/Kconfig @@ -3,7 +3,7 @@ # config SCSI_ACORNSCSI_3 tristate "Acorn SCSI card (aka30) support" - depends on ARCH_ACORN && SCSI + depends on ARCH_ACORN && SCSI && BROKEN help This enables support for the Acorn SCSI card (aka30). If you have an Acorn system with one of these, say Y. If unsure, say N. diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c index a2cfade2c1c..d96ebf9d222 100644 --- a/drivers/scsi/ata_piix.c +++ b/drivers/scsi/ata_piix.c @@ -32,7 +32,7 @@ #include <linux/libata.h> #define DRV_NAME "ata_piix" -#define DRV_VERSION "1.03" +#define DRV_VERSION "1.04" enum { PIIX_IOCFG = 0x54, /* IDE I/O configuration register */ diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 73b1f72b7e4..f4e7dcb6492 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -2268,19 +2268,6 @@ void ata_qc_prep(struct ata_queued_cmd *qc) * spin_lock_irqsave(host_set lock) */ - - -/** - * ata_sg_init_one - Prepare a one-entry scatter-gather list. - * @qc: Queued command - * @buf: transfer buffer - * @buflen: length of buf - * - * Builds a single-entry scatter-gather list to initiate a - * transfer utilizing the specified buffer. - * - * LOCKING: - */ void ata_sg_init_one(struct ata_queued_cmd *qc, void *buf, unsigned int buflen) { struct scatterlist *sg; @@ -2312,18 +2299,6 @@ void ata_sg_init_one(struct ata_queued_cmd *qc, void *buf, unsigned int buflen) * spin_lock_irqsave(host_set lock) */ - -/** - * ata_sg_init - Assign a scatter gather list to a queued command - * @qc: Queued command - * @sg: Scatter-gather list - * @n_elem: length of sg list - * - * Attaches a scatter-gather list to a queued command. - * - * LOCKING: - */ - void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg, unsigned int n_elem) { diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h index d90430bbb0d..3e7f4843020 100644 --- a/drivers/scsi/libata.h +++ b/drivers/scsi/libata.h @@ -26,7 +26,7 @@ #define __LIBATA_H__ #define DRV_NAME "libata" -#define DRV_VERSION "1.11" /* must be exactly four chars */ +#define DRV_VERSION "1.12" /* must be exactly four chars */ struct ata_scsi_args { u16 *id; diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c index 5c1d4411457..919fb314ad1 100644 --- a/drivers/scsi/sata_promise.c +++ b/drivers/scsi/sata_promise.c @@ -40,7 +40,7 @@ #include "sata_promise.h" #define DRV_NAME "sata_promise" -#define DRV_VERSION "1.01" +#define DRV_VERSION "1.02" enum { diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c index 51292f269ce..e822ca0e97c 100644 --- a/drivers/scsi/sg.c +++ b/drivers/scsi/sg.c @@ -2971,23 +2971,22 @@ static void * dev_seq_start(struct seq_file *s, loff_t *pos) { struct sg_proc_deviter * it = kmalloc(sizeof(*it), GFP_KERNEL); + s->private = it; if (! it) return NULL; + if (NULL == sg_dev_arr) - goto err1; + return NULL; it->index = *pos; it->max = sg_last_dev(); if (it->index >= it->max) - goto err1; + return NULL; return it; -err1: - kfree(it); - return NULL; } static void * dev_seq_next(struct seq_file *s, void *v, loff_t *pos) { - struct sg_proc_deviter * it = (struct sg_proc_deviter *) v; + struct sg_proc_deviter * it = s->private; *pos = ++it->index; return (it->index < it->max) ? it : NULL; @@ -2995,7 +2994,7 @@ static void * dev_seq_next(struct seq_file *s, void *v, loff_t *pos) static void dev_seq_stop(struct seq_file *s, void *v) { - kfree (v); + kfree(s->private); } static int sg_proc_open_dev(struct inode *inode, struct file *file) diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 97034d3937f..d5797618a3b 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -211,7 +211,7 @@ comment "Non-8250 serial port support" config SERIAL_AMBA_PL010 tristate "ARM AMBA PL010 serial port support" - depends on ARM_AMBA + depends on ARM_AMBA && (BROKEN || !ARCH_VERSATILE) select SERIAL_CORE help This selects the ARM(R) AMBA(R) PrimeCell PL010 UART. If you have @@ -819,7 +819,7 @@ config SERIAL_M32R_SIO_CONSOLE config SERIAL_M32R_PLDSIO bool "M32R SIO I/F on a PLD" - depends on SERIAL_M32R_SIO=y + depends on SERIAL_M32R_SIO=y && (PLAT_OPSPUT || PALT_USRV || PLAT_M32700UT) default n help Say Y here if you want to use the M32R serial controller diff --git a/drivers/serial/m32r_sio.c b/drivers/serial/m32r_sio.c index 0301feacbde..9b50560b9d1 100644 --- a/drivers/serial/m32r_sio.c +++ b/drivers/serial/m32r_sio.c @@ -1123,7 +1123,7 @@ static int __init m32r_sio_console_setup(struct console *co, char *options) return uart_set_options(port, co, baud, parity, bits, flow); } -extern struct uart_driver m32r_sio_reg; +static struct uart_driver m32r_sio_reg; static struct console m32r_sio_console = { .name = "ttyS", .write = m32r_sio_console_write, diff --git a/drivers/usb/net/usbnet.c b/drivers/usb/net/usbnet.c index 576f3b852fc..4528a00c45b 100644 --- a/drivers/usb/net/usbnet.c +++ b/drivers/usb/net/usbnet.c @@ -1922,7 +1922,7 @@ static int genelink_rx_fixup (struct usbnet *dev, struct sk_buff *skb) // copy the packet data to the new skb memcpy(skb_put(gl_skb, size), packet->packet_data, size); - skb_return (dev, skb); + skb_return (dev, gl_skb); } // advance to the next packet diff --git a/drivers/usb/net/zd1201.c b/drivers/usb/net/zd1201.c index 29cd801eb95..e32a80b3918 100644 --- a/drivers/usb/net/zd1201.c +++ b/drivers/usb/net/zd1201.c @@ -346,8 +346,7 @@ static void zd1201_usbrx(struct urb *urb, struct pt_regs *regs) if (datalen<14) goto resubmit; if ((seq & IEEE802_11_SCTL_FRAG) == 0) { - frag = kmalloc(sizeof(struct zd1201_frag*), - GFP_ATOMIC); + frag = kmalloc(sizeof(*frag), GFP_ATOMIC); if (!frag) goto resubmit; skb = dev_alloc_skb(IEEE802_11_DATA_LEN +14+2); diff --git a/drivers/video/console/Kconfig b/drivers/video/console/Kconfig index cbff98337aa..5fe182d6e4a 100644 --- a/drivers/video/console/Kconfig +++ b/drivers/video/console/Kconfig @@ -6,7 +6,7 @@ menu "Console display driver support" config VGA_CONSOLE bool "VGA text console" if EMBEDDED || !X86 - depends on !ARCH_ACORN && !ARCH_EBSA110 && !4xx && !8xx && !SPARC32 && !SPARC64 && !M68K && !PARISC + depends on !ARCH_ACORN && !ARCH_EBSA110 && !4xx && !8xx && !SPARC32 && !SPARC64 && !M68K && !PARISC && !ARCH_VERSATILE default y help Saying Y here will allow you to use Linux in text mode through a |