summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/acpi/acpi_memhotplug.c34
-rw-r--r--drivers/acpi/acpica/acobject.h1
-rw-r--r--drivers/acpi/acpica/dsopcode.c24
-rw-r--r--drivers/acpi/acpica/exfldio.c6
-rw-r--r--drivers/acpi/osl.c25
-rw-r--r--drivers/acpi/system.c2
-rw-r--r--drivers/ata/ahci.c79
-rw-r--r--drivers/ata/libata-core.c3
-rw-r--r--drivers/ata/pata_at91.c17
-rw-r--r--drivers/ata/pata_atiixp.c19
-rw-r--r--drivers/ata/sata_nv.c8
-rw-r--r--drivers/base/platform.c3
-rw-r--r--drivers/block/mg_disk.c101
-rw-r--r--drivers/char/agp/parisc-agp.c2
-rw-r--r--drivers/char/pty.c2
-rw-r--r--drivers/char/tty_ldisc.c152
-rw-r--r--drivers/clocksource/sh_cmt.c28
-rw-r--r--drivers/cpufreq/cpufreq.c27
-rw-r--r--drivers/cpufreq/cpufreq_conservative.c6
-rw-r--r--drivers/dma/Kconfig12
-rw-r--r--drivers/dma/Makefile1
-rw-r--r--drivers/dma/at_hdmac.c1213
-rw-r--r--drivers/dma/at_hdmac_regs.h353
-rw-r--r--drivers/dma/dmatest.c21
-rw-r--r--drivers/dma/fsldma.c17
-rw-r--r--drivers/dma/fsldma.h1
-rw-r--r--drivers/dma/mv_xor.c2
-rw-r--r--drivers/edac/amd64_edac.c7
-rw-r--r--drivers/gpu/drm/drm_crtc.c2
-rw-r--r--drivers/gpu/drm/drm_crtc_helper.c6
-rw-r--r--drivers/gpu/drm/drm_irq.c2
-rw-r--r--drivers/gpu/drm/drm_modes.c2
-rw-r--r--drivers/gpu/drm/i915/i915_dma.c15
-rw-r--r--drivers/gpu/drm/i915/i915_drv.h4
-rw-r--r--drivers/gpu/drm/i915/i915_gem.c4
-rw-r--r--drivers/gpu/drm/i915/i915_gem_debugfs.c2
-rw-r--r--drivers/gpu/drm/i915/i915_irq.c239
-rw-r--r--drivers/gpu/drm/i915/i915_reg.h45
-rw-r--r--drivers/gpu/drm/i915/i915_suspend.c2
-rw-r--r--drivers/gpu/drm/i915/intel_bios.c40
-rw-r--r--drivers/gpu/drm/i915/intel_bios.h45
-rw-r--r--drivers/gpu/drm/i915/intel_crt.c12
-rw-r--r--drivers/gpu/drm/i915/intel_display.c759
-rw-r--r--drivers/gpu/drm/i915/intel_dp.c216
-rw-r--r--drivers/gpu/drm/i915/intel_drv.h3
-rw-r--r--drivers/gpu/drm/i915/intel_hdmi.c64
-rw-r--r--drivers/gpu/drm/i915/intel_lvds.c12
-rw-r--r--drivers/gpu/drm/i915/intel_sdvo.c254
-rw-r--r--drivers/gpu/drm/i915/intel_tv.c22
-rw-r--r--drivers/gpu/drm/radeon/r100.c3
-rw-r--r--drivers/gpu/drm/radeon/r600_cp.c22
-rw-r--r--drivers/gpu/drm/radeon/radeon_device.c4
-rw-r--r--drivers/gpu/drm/radeon/radeon_drv.c17
-rw-r--r--drivers/gpu/drm/radeon/radeon_drv.h1
-rw-r--r--drivers/gpu/drm/radeon/radeon_kms.c2
-rw-r--r--drivers/gpu/drm/radeon/radeon_object.c2
-rw-r--r--drivers/gpu/drm/radeon/rv515.c1
-rw-r--r--drivers/gpu/drm/ttm/ttm_bo.c7
-rw-r--r--drivers/gpu/drm/ttm/ttm_bo_util.c8
-rw-r--r--drivers/input/keyboard/matrix_keypad.c18
-rw-r--r--drivers/input/misc/wistron_btns.c16
-rw-r--r--drivers/input/serio/hp_sdc_mlc.c2
-rw-r--r--drivers/input/serio/i8042-x86ia64io.h8
-rw-r--r--drivers/isdn/mISDN/l1oip_core.c2
-rw-r--r--drivers/lguest/core.c119
-rw-r--r--drivers/lguest/hypercalls.c145
-rw-r--r--drivers/lguest/interrupts_and_traps.c288
-rw-r--r--drivers/lguest/lg.h32
-rw-r--r--drivers/lguest/lguest_device.c160
-rw-r--r--drivers/lguest/lguest_user.c232
-rw-r--r--drivers/lguest/page_tables.c489
-rw-r--r--drivers/lguest/segments.c106
-rw-r--r--drivers/lguest/x86/core.c374
-rw-r--r--drivers/lguest/x86/switcher_32.S22
-rw-r--r--drivers/md/linear.c2
-rw-r--r--drivers/md/md.c176
-rw-r--r--drivers/md/md.h12
-rw-r--r--drivers/md/multipath.c5
-rw-r--r--drivers/md/raid0.c1
-rw-r--r--drivers/md/raid1.c7
-rw-r--r--drivers/md/raid10.c4
-rw-r--r--drivers/md/raid5.c85
-rw-r--r--drivers/mfd/twl4030-irq.c55
-rw-r--r--drivers/misc/cb710/sgbuf2.c4
-rw-r--r--drivers/mmc/host/cb710-mmc.c6
-rw-r--r--drivers/mmc/host/imxmmc.c2
-rw-r--r--drivers/mmc/host/sdhci-of.c2
-rw-r--r--drivers/mmc/host/sdhci.c10
-rw-r--r--drivers/mtd/maps/Kconfig7
-rw-r--r--drivers/mtd/maps/Makefile1
-rw-r--r--drivers/mtd/maps/sbc8240.c250
-rw-r--r--drivers/mtd/mtd_blkdevs.c6
-rw-r--r--drivers/mtd/mtdblock.c16
-rw-r--r--drivers/mtd/mtdcore.c7
-rw-r--r--drivers/mtd/onenand/omap2.c3
-rw-r--r--drivers/mtd/ubi/eba.c1
-rw-r--r--drivers/mtd/ubi/scan.c13
-rw-r--r--drivers/net/3c515.c4
-rw-r--r--drivers/net/3c59x.c10
-rw-r--r--drivers/net/eexpress.c6
-rw-r--r--drivers/net/ehea/ehea.h2
-rw-r--r--drivers/net/ehea/ehea_main.c3
-rw-r--r--drivers/net/gianfar_ethtool.c10
-rw-r--r--drivers/net/igbvf/vf.c4
-rw-r--r--drivers/net/ixgbe/ixgbe.h2
-rw-r--r--drivers/net/ixgbe/ixgbe_82598.c67
-rw-r--r--drivers/net/ixgbe/ixgbe_ethtool.c11
-rw-r--r--drivers/net/ixgbe/ixgbe_main.c25
-rw-r--r--drivers/net/ixgbe/ixgbe_type.h8
-rw-r--r--drivers/net/mlx4/en_tx.c1
-rw-r--r--drivers/net/netxen/netxen_nic_main.c37
-rw-r--r--drivers/net/pcnet32.c30
-rw-r--r--drivers/net/ppp_generic.c34
-rw-r--r--drivers/net/pppoe.c1
-rw-r--r--drivers/net/pppol2tp.c1
-rw-r--r--drivers/net/s6gmac.c2
-rw-r--r--drivers/net/sky2.c14
-rw-r--r--drivers/net/sky2.h1
-rw-r--r--drivers/net/tulip/de4x5.c6
-rw-r--r--drivers/net/wireless/airo.c13
-rw-r--r--drivers/net/wireless/ath/ath9k/eeprom.c4
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-3945.h2
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-core.c3
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-debugfs.c12
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-dev.h6
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-sta.c12
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-tx.c14
-rw-r--r--drivers/net/wireless/iwlwifi/iwl3945-base.c7
-rw-r--r--drivers/net/wireless/iwmc3200wifi/commands.c1
-rw-r--r--drivers/net/wireless/iwmc3200wifi/netdev.c6
-rw-r--r--drivers/net/wireless/libertas/11d.c2
-rw-r--r--drivers/net/wireless/libertas/assoc.c18
-rw-r--r--drivers/net/wireless/libertas/scan.c3
-rw-r--r--drivers/net/wireless/zd1211rw/zd_mac.c2
-rw-r--r--drivers/parisc/ccio-dma.c1
-rw-r--r--drivers/parisc/dino.c2
-rw-r--r--drivers/parisc/eisa_eeprom.c2
-rw-r--r--drivers/parisc/hppb.c9
-rw-r--r--drivers/parisc/lba_pci.c2
-rw-r--r--drivers/parisc/pdc_stable.c2
-rw-r--r--drivers/pci/hotplug/sgi_hotplug.c7
-rw-r--r--drivers/pci/intel-iommu.c25
-rw-r--r--drivers/pci/setup-res.c4
-rw-r--r--drivers/platform/x86/Kconfig25
-rw-r--r--drivers/platform/x86/eeepc-laptop.c9
-rw-r--r--drivers/platform/x86/hp-wmi.c12
-rw-r--r--drivers/platform/x86/thinkpad_acpi.c390
-rw-r--r--drivers/power/Kconfig7
-rw-r--r--drivers/power/Makefile1
-rw-r--r--drivers/power/ds2782_battery.c330
-rw-r--r--drivers/power/olpc_battery.c26
-rw-r--r--drivers/s390/scsi/zfcp_erp.c68
-rw-r--r--drivers/s390/scsi/zfcp_fc.c8
-rw-r--r--drivers/s390/scsi/zfcp_fsf.c56
-rw-r--r--drivers/s390/scsi/zfcp_scsi.c25
-rw-r--r--drivers/s390/scsi/zfcp_sysfs.c7
-rw-r--r--drivers/scsi/libfc/fc_exch.c23
-rw-r--r--drivers/scsi/libiscsi.c4
-rw-r--r--drivers/scsi/libsas/sas_expander.c147
-rw-r--r--drivers/scsi/libsas/sas_port.c19
-rw-r--r--drivers/scsi/qla4xxx/ql4_dbg.c15
-rw-r--r--drivers/scsi/qla4xxx/ql4_def.h9
-rw-r--r--drivers/scsi/qla4xxx/ql4_fw.h7
-rw-r--r--drivers/scsi/qla4xxx/ql4_iocb.c133
-rw-r--r--drivers/scsi/qla4xxx/ql4_isr.c145
-rw-r--r--drivers/scsi/qla4xxx/ql4_mbx.c10
-rw-r--r--drivers/scsi/qla4xxx/ql4_os.c40
-rw-r--r--drivers/scsi/qla4xxx/ql4_version.h2
-rw-r--r--drivers/scsi/scsi_transport_iscsi.c4
-rw-r--r--drivers/scsi/sd.c20
-rw-r--r--drivers/serial/cpm_uart/cpm_uart_cpm2.c2
-rw-r--r--drivers/serial/s3c2400.c8
-rw-r--r--drivers/serial/s3c2410.c8
-rw-r--r--drivers/serial/s3c2412.c8
-rw-r--r--drivers/serial/s3c2440.c8
-rw-r--r--drivers/serial/s3c24a0.c8
-rw-r--r--drivers/serial/s3c6400.c8
-rw-r--r--drivers/serial/serial_ks8695.c2
-rw-r--r--drivers/staging/b3dfg/Kconfig1
-rw-r--r--drivers/staging/heci/Kconfig1
-rw-r--r--drivers/staging/rspiusb/rspiusb.c2
-rw-r--r--drivers/staging/rt2860/rt_linux.h13
-rw-r--r--drivers/staging/rt2870/2870_main_dev.c67
-rw-r--r--drivers/staging/rt2870/common/2870_rtmp_init.c33
-rw-r--r--drivers/staging/rt2870/common/rtusb_io.c3
-rw-r--r--drivers/staging/rt2870/rt2870.h9
-rw-r--r--drivers/staging/rtl8192su/ieee80211.h2
-rw-r--r--drivers/staging/rtl8192su/ieee80211/ieee80211.h2
-rw-r--r--drivers/staging/rtl8192su/ieee80211/ieee80211_tx.c3
-rw-r--r--drivers/staging/rtl8192su/r8192U_core.c2
-rw-r--r--drivers/usb/class/cdc-acm.c10
-rw-r--r--drivers/usb/class/cdc-acm.h2
-rw-r--r--drivers/usb/core/devio.c10
-rw-r--r--drivers/usb/host/ehci-hcd.c3
-rw-r--r--drivers/usb/host/ehci-q.c15
-rw-r--r--drivers/usb/host/ehci-sched.c1
-rw-r--r--drivers/usb/musb/Kconfig1
-rw-r--r--drivers/usb/serial/ftdi_sio.c3
-rw-r--r--drivers/usb/serial/ftdi_sio.h14
-rw-r--r--drivers/usb/serial/pl2303.c1
-rw-r--r--drivers/usb/serial/pl2303.h4
-rw-r--r--drivers/usb/storage/unusual_devs.h7
-rw-r--r--drivers/video/console/fbcon.c6
-rw-r--r--drivers/video/console/fbcon_rotate.h2
-rw-r--r--drivers/video/console/sticore.c9
-rw-r--r--drivers/video/mx3fb.c86
-rw-r--r--drivers/video/sh_mobile_lcdcfb.c10
-rw-r--r--drivers/video/via/hw.c4
-rw-r--r--drivers/video/via/lcd.c15
-rw-r--r--drivers/video/via/viafbdev.c101
-rw-r--r--drivers/video/via/viafbdev.h3
-rw-r--r--drivers/virtio/virtio_pci.c240
-rw-r--r--drivers/w1/masters/omap_hdq.c1
-rw-r--r--drivers/watchdog/coh901327_wdt.c11
-rw-r--r--drivers/watchdog/ks8695_wdt.c4
215 files changed, 6478 insertions, 2926 deletions
diff --git a/drivers/acpi/acpi_memhotplug.c b/drivers/acpi/acpi_memhotplug.c
index 7a0f4aa4fa1..9a62224cc27 100644
--- a/drivers/acpi/acpi_memhotplug.c
+++ b/drivers/acpi/acpi_memhotplug.c
@@ -38,6 +38,9 @@
#define _COMPONENT ACPI_MEMORY_DEVICE_COMPONENT
+#undef PREFIX
+#define PREFIX "ACPI:memory_hp:"
+
ACPI_MODULE_NAME("acpi_memhotplug");
MODULE_AUTHOR("Naveen B S <naveen.b.s@intel.com>");
MODULE_DESCRIPTION("Hotplug Mem Driver");
@@ -153,6 +156,7 @@ acpi_memory_get_device(acpi_handle handle,
acpi_handle phandle;
struct acpi_device *device = NULL;
struct acpi_device *pdevice = NULL;
+ int result;
if (!acpi_bus_get_device(handle, &device) && device)
@@ -165,9 +169,9 @@ acpi_memory_get_device(acpi_handle handle,
}
/* Get the parent device */
- status = acpi_bus_get_device(phandle, &pdevice);
- if (ACPI_FAILURE(status)) {
- ACPI_EXCEPTION((AE_INFO, status, "Cannot get acpi bus device"));
+ result = acpi_bus_get_device(phandle, &pdevice);
+ if (result) {
+ printk(KERN_WARNING PREFIX "Cannot get acpi bus device");
return -EINVAL;
}
@@ -175,9 +179,9 @@ acpi_memory_get_device(acpi_handle handle,
* Now add the notified device. This creates the acpi_device
* and invokes .add function
*/
- status = acpi_bus_add(&device, pdevice, handle, ACPI_BUS_TYPE_DEVICE);
- if (ACPI_FAILURE(status)) {
- ACPI_EXCEPTION((AE_INFO, status, "Cannot add acpi bus"));
+ result = acpi_bus_add(&device, pdevice, handle, ACPI_BUS_TYPE_DEVICE);
+ if (result) {
+ printk(KERN_WARNING PREFIX "Cannot add acpi bus");
return -EINVAL;
}
@@ -238,7 +242,12 @@ static int acpi_memory_enable_device(struct acpi_memory_device *mem_device)
num_enabled++;
continue;
}
-
+ /*
+ * If the memory block size is zero, please ignore it.
+ * Don't try to do the following memory hotplug flowchart.
+ */
+ if (!info->length)
+ continue;
if (node < 0)
node = memory_add_physaddr_to_nid(info->start_addr);
@@ -253,8 +262,15 @@ static int acpi_memory_enable_device(struct acpi_memory_device *mem_device)
mem_device->state = MEMORY_INVALID_STATE;
return -EINVAL;
}
-
- return result;
+ /*
+ * Sometimes the memory device will contain several memory blocks.
+ * When one memory block is hot-added to the system memory, it will
+ * be regarded as a success.
+ * Otherwise if the last memory block can't be hot-added to the system
+ * memory, it will be failure and the memory device can't be bound with
+ * driver.
+ */
+ return 0;
}
static int acpi_memory_powerdown_device(struct acpi_memory_device *mem_device)
diff --git a/drivers/acpi/acpica/acobject.h b/drivers/acpi/acpica/acobject.h
index 544dcf83492..eb6f038b03d 100644
--- a/drivers/acpi/acpica/acobject.h
+++ b/drivers/acpi/acpica/acobject.h
@@ -97,6 +97,7 @@
#define AOPOBJ_OBJECT_INITIALIZED 0x08
#define AOPOBJ_SETUP_COMPLETE 0x10
#define AOPOBJ_SINGLE_DATUM 0x20
+#define AOPOBJ_INVALID 0x40 /* Used if host OS won't allow an op_region address */
/******************************************************************************
*
diff --git a/drivers/acpi/acpica/dsopcode.c b/drivers/acpi/acpica/dsopcode.c
index 584d766e6f1..b79978f7bc7 100644
--- a/drivers/acpi/acpica/dsopcode.c
+++ b/drivers/acpi/acpica/dsopcode.c
@@ -397,6 +397,30 @@ acpi_status acpi_ds_get_region_arguments(union acpi_operand_object *obj_desc)
status = acpi_ds_execute_arguments(node, acpi_ns_get_parent_node(node),
extra_desc->extra.aml_length,
extra_desc->extra.aml_start);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+
+ /* Validate the region address/length via the host OS */
+
+ status = acpi_os_validate_address(obj_desc->region.space_id,
+ obj_desc->region.address,
+ (acpi_size) obj_desc->region.length,
+ acpi_ut_get_node_name(node));
+
+ if (ACPI_FAILURE(status)) {
+ /*
+ * Invalid address/length. We will emit an error message and mark
+ * the region as invalid, so that it will cause an additional error if
+ * it is ever used. Then return AE_OK.
+ */
+ ACPI_EXCEPTION((AE_INFO, status,
+ "During address validation of OpRegion [%4.4s]",
+ node->name.ascii));
+ obj_desc->common.flags |= AOPOBJ_INVALID;
+ status = AE_OK;
+ }
+
return_ACPI_STATUS(status);
}
diff --git a/drivers/acpi/acpica/exfldio.c b/drivers/acpi/acpica/exfldio.c
index d4075b82102..6687be167f5 100644
--- a/drivers/acpi/acpica/exfldio.c
+++ b/drivers/acpi/acpica/exfldio.c
@@ -113,6 +113,12 @@ acpi_ex_setup_region(union acpi_operand_object *obj_desc,
}
}
+ /* Exit if Address/Length have been disallowed by the host OS */
+
+ if (rgn_desc->common.flags & AOPOBJ_INVALID) {
+ return_ACPI_STATUS(AE_AML_ILLEGAL_ADDRESS);
+ }
+
/*
* Exit now for SMBus address space, it has a non-linear address space
* and the request cannot be directly validated
diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c
index 71670719d61..5691f165a95 100644
--- a/drivers/acpi/osl.c
+++ b/drivers/acpi/osl.c
@@ -189,11 +189,36 @@ acpi_status __init acpi_os_initialize(void)
return AE_OK;
}
+static void bind_to_cpu0(struct work_struct *work)
+{
+ set_cpus_allowed(current, cpumask_of_cpu(0));
+ kfree(work);
+}
+
+static void bind_workqueue(struct workqueue_struct *wq)
+{
+ struct work_struct *work;
+
+ work = kzalloc(sizeof(struct work_struct), GFP_KERNEL);
+ INIT_WORK(work, bind_to_cpu0);
+ queue_work(wq, work);
+}
+
acpi_status acpi_os_initialize1(void)
{
+ /*
+ * On some machines, a software-initiated SMI causes corruption unless
+ * the SMI runs on CPU 0. An SMI can be initiated by any AML, but
+ * typically it's done in GPE-related methods that are run via
+ * workqueues, so we can avoid the known corruption cases by binding
+ * the workqueues to CPU 0.
+ */
kacpid_wq = create_singlethread_workqueue("kacpid");
+ bind_workqueue(kacpid_wq);
kacpi_notify_wq = create_singlethread_workqueue("kacpi_notify");
+ bind_workqueue(kacpi_notify_wq);
kacpi_hotplug_wq = create_singlethread_workqueue("kacpi_hotplug");
+ bind_workqueue(kacpi_hotplug_wq);
BUG_ON(!kacpid_wq);
BUG_ON(!kacpi_notify_wq);
BUG_ON(!kacpi_hotplug_wq);
diff --git a/drivers/acpi/system.c b/drivers/acpi/system.c
index 0944daec064..9c61ab2177c 100644
--- a/drivers/acpi/system.c
+++ b/drivers/acpi/system.c
@@ -121,7 +121,7 @@ static void acpi_table_attr_init(struct acpi_table_attr *table_attr,
table_attr->attr.size = 0;
table_attr->attr.read = acpi_table_show;
table_attr->attr.attr.name = table_attr->name;
- table_attr->attr.attr.mode = 0444;
+ table_attr->attr.attr.mode = 0400;
return;
}
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 958c1fa4190..fe3eba5d6b3 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -219,6 +219,8 @@ enum {
AHCI_HFLAG_SECT255 = (1 << 8), /* max 255 sectors */
AHCI_HFLAG_YES_NCQ = (1 << 9), /* force NCQ cap on */
AHCI_HFLAG_NO_SUSPEND = (1 << 10), /* don't suspend */
+ AHCI_HFLAG_SRST_TOUT_IS_OFFLINE = (1 << 11), /* treat SRST timeout as
+ link offline */
/* ap->flags bits */
@@ -1663,6 +1665,7 @@ static int ahci_do_softreset(struct ata_link *link, unsigned int *class,
int (*check_ready)(struct ata_link *link))
{
struct ata_port *ap = link->ap;
+ struct ahci_host_priv *hpriv = ap->host->private_data;
const char *reason = NULL;
unsigned long now, msecs;
struct ata_taskfile tf;
@@ -1701,12 +1704,21 @@ static int ahci_do_softreset(struct ata_link *link, unsigned int *class,
/* wait for link to become ready */
rc = ata_wait_after_reset(link, deadline, check_ready);
- /* link occupied, -ENODEV too is an error */
- if (rc) {
+ if (rc == -EBUSY && hpriv->flags & AHCI_HFLAG_SRST_TOUT_IS_OFFLINE) {
+ /*
+ * Workaround for cases where link online status can't
+ * be trusted. Treat device readiness timeout as link
+ * offline.
+ */
+ ata_link_printk(link, KERN_INFO,
+ "device not ready, treating as offline\n");
+ *class = ATA_DEV_NONE;
+ } else if (rc) {
+ /* link occupied, -ENODEV too is an error */
reason = "device not ready";
goto fail;
- }
- *class = ahci_dev_classify(ap);
+ } else
+ *class = ahci_dev_classify(ap);
DPRINTK("EXIT, class=%u\n", *class);
return 0;
@@ -1773,7 +1785,8 @@ static int ahci_sb600_softreset(struct ata_link *link, unsigned int *class,
irq_sts = readl(port_mmio + PORT_IRQ_STAT);
if (irq_sts & PORT_IRQ_BAD_PMP) {
ata_link_printk(link, KERN_WARNING,
- "failed due to HW bug, retry pmp=0\n");
+ "applying SB600 PMP SRST workaround "
+ "and retrying\n");
rc = ahci_do_softreset(link, class, 0, deadline,
ahci_check_ready);
}
@@ -2726,6 +2739,56 @@ static bool ahci_broken_suspend(struct pci_dev *pdev)
return !ver || strcmp(ver, dmi->driver_data) < 0;
}
+static bool ahci_broken_online(struct pci_dev *pdev)
+{
+#define ENCODE_BUSDEVFN(bus, slot, func) \
+ (void *)(unsigned long)(((bus) << 8) | PCI_DEVFN((slot), (func)))
+ static const struct dmi_system_id sysids[] = {
+ /*
+ * There are several gigabyte boards which use
+ * SIMG5723s configured as hardware RAID. Certain
+ * 5723 firmware revisions shipped there keep the link
+ * online but fail to answer properly to SRST or
+ * IDENTIFY when no device is attached downstream
+ * causing libata to retry quite a few times leading
+ * to excessive detection delay.
+ *
+ * As these firmwares respond to the second reset try
+ * with invalid device signature, considering unknown
+ * sig as offline works around the problem acceptably.
+ */
+ {
+ .ident = "EP45-DQ6",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR,
+ "Gigabyte Technology Co., Ltd."),
+ DMI_MATCH(DMI_BOARD_NAME, "EP45-DQ6"),
+ },
+ .driver_data = ENCODE_BUSDEVFN(0x0a, 0x00, 0),
+ },
+ {
+ .ident = "EP45-DS5",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR,
+ "Gigabyte Technology Co., Ltd."),
+ DMI_MATCH(DMI_BOARD_NAME, "EP45-DS5"),
+ },
+ .driver_data = ENCODE_BUSDEVFN(0x03, 0x00, 0),
+ },
+ { } /* terminate list */
+ };
+#undef ENCODE_BUSDEVFN
+ const struct dmi_system_id *dmi = dmi_first_match(sysids);
+ unsigned int val;
+
+ if (!dmi)
+ return false;
+
+ val = (unsigned long)dmi->driver_data;
+
+ return pdev->bus->number == (val >> 8) && pdev->devfn == (val & 0xff);
+}
+
static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
static int printed_version;
@@ -2841,6 +2904,12 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
"BIOS update required for suspend/resume\n");
}
+ if (ahci_broken_online(pdev)) {
+ hpriv->flags |= AHCI_HFLAG_SRST_TOUT_IS_OFFLINE;
+ dev_info(&pdev->dev,
+ "online status unreliable, applying workaround\n");
+ }
+
/* CAP.NP sometimes indicate the index of the last enabled
* port, at other times, that of the last possible port, so
* determining the maximum port number requires looking at
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 8ac98ff16d7..072ba5ea138 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4302,6 +4302,9 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
{ "WDC WD2500JD-00HBB0", "WD-WMAL71490727", ATA_HORKAGE_BROKEN_HPA },
{ "MAXTOR 6L080L4", "A93.0500", ATA_HORKAGE_BROKEN_HPA },
+ /* this one allows HPA unlocking but fails IOs on the area */
+ { "OCZ-VERTEX", "1.30", ATA_HORKAGE_BROKEN_HPA },
+
/* Devices which report 1 sector over size HPA */
{ "ST340823A", NULL, ATA_HORKAGE_HPA_SIZE, },
{ "ST320413A", NULL, ATA_HORKAGE_HPA_SIZE, },
diff --git a/drivers/ata/pata_at91.c b/drivers/ata/pata_at91.c
index 5702affcb32..41c94b1ae49 100644
--- a/drivers/ata/pata_at91.c
+++ b/drivers/ata/pata_at91.c
@@ -250,7 +250,7 @@ static int __devinit pata_at91_probe(struct platform_device *pdev)
ata_port_desc(ap, "no IRQ, using PIO polling");
}
- info = kzalloc(sizeof(*info), GFP_KERNEL);
+ info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL);
if (!info) {
dev_err(dev, "failed to allocate memory for private data\n");
@@ -275,7 +275,7 @@ static int __devinit pata_at91_probe(struct platform_device *pdev)
if (!info->ide_addr) {
dev_err(dev, "failed to map IO base\n");
ret = -ENOMEM;
- goto err_ide_ioremap;
+ goto err_put;
}
info->alt_addr = devm_ioremap(dev,
@@ -284,7 +284,7 @@ static int __devinit pata_at91_probe(struct platform_device *pdev)
if (!info->alt_addr) {
dev_err(dev, "failed to map CTL base\n");
ret = -ENOMEM;
- goto err_alt_ioremap;
+ goto err_put;
}
ap->ioaddr.cmd_addr = info->ide_addr;
@@ -303,13 +303,8 @@ static int __devinit pata_at91_probe(struct platform_device *pdev)
irq ? ata_sff_interrupt : NULL,
irq_flags, &pata_at91_sht);
-err_alt_ioremap:
- devm_iounmap(dev, info->ide_addr);
-
-err_ide_ioremap:
+err_put:
clk_put(info->mck);
- kfree(info);
-
return ret;
}
@@ -317,7 +312,6 @@ static int __devexit pata_at91_remove(struct platform_device *pdev)
{
struct ata_host *host = dev_get_drvdata(&pdev->dev);
struct at91_ide_info *info;
- struct device *dev = &pdev->dev;
if (!host)
return 0;
@@ -328,11 +322,8 @@ static int __devexit pata_at91_remove(struct platform_device *pdev)
if (!info)
return 0;
- devm_iounmap(dev, info->ide_addr);
- devm_iounmap(dev, info->alt_addr);
clk_put(info->mck);
- kfree(info);
return 0;
}
diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c
index bec0b8ade66..45915566e4e 100644
--- a/drivers/ata/pata_atiixp.c
+++ b/drivers/ata/pata_atiixp.c
@@ -1,6 +1,7 @@
/*
* pata_atiixp.c - ATI PATA for new ATA layer
* (C) 2005 Red Hat Inc
+ * (C) 2009 Bartlomiej Zolnierkiewicz
*
* Based on
*
@@ -61,20 +62,19 @@ static void atiixp_set_pio_timing(struct ata_port *ap, struct ata_device *adev,
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
int dn = 2 * ap->port_no + adev->devno;
-
- /* Check this is correct - the order is odd in both drivers */
int timing_shift = (16 * ap->port_no) + 8 * (adev->devno ^ 1);
- u16 pio_mode_data, pio_timing_data;
+ u32 pio_timing_data;
+ u16 pio_mode_data;
pci_read_config_word(pdev, ATIIXP_IDE_PIO_MODE, &pio_mode_data);
pio_mode_data &= ~(0x7 << (4 * dn));
pio_mode_data |= pio << (4 * dn);
pci_write_config_word(pdev, ATIIXP_IDE_PIO_MODE, pio_mode_data);
- pci_read_config_word(pdev, ATIIXP_IDE_PIO_TIMING, &pio_timing_data);
+ pci_read_config_dword(pdev, ATIIXP_IDE_PIO_TIMING, &pio_timing_data);
pio_timing_data &= ~(0xFF << timing_shift);
pio_timing_data |= (pio_timings[pio] << timing_shift);
- pci_write_config_word(pdev, ATIIXP_IDE_PIO_TIMING, pio_timing_data);
+ pci_write_config_dword(pdev, ATIIXP_IDE_PIO_TIMING, pio_timing_data);
}
/**
@@ -119,16 +119,17 @@ static void atiixp_set_dmamode(struct ata_port *ap, struct ata_device *adev)
udma_mode_data |= dma << (4 * dn);
pci_write_config_word(pdev, ATIIXP_IDE_UDMA_MODE, udma_mode_data);
} else {
- u16 mwdma_timing_data;
- /* Check this is correct - the order is odd in both drivers */
int timing_shift = (16 * ap->port_no) + 8 * (adev->devno ^ 1);
+ u32 mwdma_timing_data;
dma -= XFER_MW_DMA_0;
- pci_read_config_word(pdev, ATIIXP_IDE_MWDMA_TIMING, &mwdma_timing_data);
+ pci_read_config_dword(pdev, ATIIXP_IDE_MWDMA_TIMING,
+ &mwdma_timing_data);
mwdma_timing_data &= ~(0xFF << timing_shift);
mwdma_timing_data |= (mwdma_timings[dma] << timing_shift);
- pci_write_config_word(pdev, ATIIXP_IDE_MWDMA_TIMING, mwdma_timing_data);
+ pci_write_config_dword(pdev, ATIIXP_IDE_MWDMA_TIMING,
+ mwdma_timing_data);
}
/*
* We must now look at the PIO mode situation. We may need to
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index b2d11f300c3..86a40582999 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -602,6 +602,7 @@ MODULE_VERSION(DRV_VERSION);
static int adma_enabled;
static int swncq_enabled = 1;
+static int msi_enabled;
static void nv_adma_register_mode(struct ata_port *ap)
{
@@ -2459,6 +2460,11 @@ static int nv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
} else if (type == SWNCQ)
nv_swncq_host_init(host);
+ if (msi_enabled) {
+ dev_printk(KERN_NOTICE, &pdev->dev, "Using MSI\n");
+ pci_enable_msi(pdev);
+ }
+
pci_set_master(pdev);
return ata_host_activate(host, pdev->irq, ipriv->irq_handler,
IRQF_SHARED, ipriv->sht);
@@ -2558,4 +2564,6 @@ module_param_named(adma, adma_enabled, bool, 0444);
MODULE_PARM_DESC(adma, "Enable use of ADMA (Default: false)");
module_param_named(swncq, swncq_enabled, bool, 0444);
MODULE_PARM_DESC(swncq, "Enable use of SWNCQ (Default: true)");
+module_param_named(msi, msi_enabled, bool, 0444);
+MODULE_PARM_DESC(msi, "Enable use of MSI (Default: false)");
diff --git a/drivers/base/platform.c b/drivers/base/platform.c
index ae5c4aa6d26..d28c289e4a3 100644
--- a/drivers/base/platform.c
+++ b/drivers/base/platform.c
@@ -483,9 +483,6 @@ int platform_driver_register(struct platform_driver *drv)
drv->driver.remove = platform_drv_remove;
if (drv->shutdown)
drv->driver.shutdown = platform_drv_shutdown;
- if (drv->suspend || drv->resume)
- pr_warning("Platform driver '%s' needs updating - please use "
- "dev_pm_ops\n", drv->driver.name);
return driver_register(&drv->driver);
}
diff --git a/drivers/block/mg_disk.c b/drivers/block/mg_disk.c
index f703f547824..6d7fbaa9224 100644
--- a/drivers/block/mg_disk.c
+++ b/drivers/block/mg_disk.c
@@ -36,7 +36,6 @@
/* Register offsets */
#define MG_BUFF_OFFSET 0x8000
-#define MG_STORAGE_BUFFER_SIZE 0x200
#define MG_REG_OFFSET 0xC000
#define MG_REG_FEATURE (MG_REG_OFFSET + 2) /* write case */
#define MG_REG_ERROR (MG_REG_OFFSET + 2) /* read case */
@@ -219,6 +218,16 @@ static unsigned int mg_wait(struct mg_host *host, u32 expect, u32 msec)
host->error = MG_ERR_NONE;
expire = jiffies + msecs_to_jiffies(msec);
+ /* These 2 times dummy status read prevents reading invalid
+ * status. A very little time (3 times of mflash operating clk)
+ * is required for busy bit is set. Use dummy read instead of
+ * busy wait, because mflash's PLL is machine dependent.
+ */
+ if (prv_data->use_polling) {
+ status = inb((unsigned long)host->dev_base + MG_REG_STATUS);
+ status = inb((unsigned long)host->dev_base + MG_REG_STATUS);
+ }
+
status = inb((unsigned long)host->dev_base + MG_REG_STATUS);
do {
@@ -245,8 +254,6 @@ static unsigned int mg_wait(struct mg_host *host, u32 expect, u32 msec)
mg_dump_status("not ready", status, host);
return MG_ERR_INV_STAT;
}
- if (prv_data->use_polling)
- msleep(1);
status = inb((unsigned long)host->dev_base + MG_REG_STATUS);
} while (time_before(cur_jiffies, expire));
@@ -469,9 +476,18 @@ static unsigned int mg_out(struct mg_host *host,
return MG_ERR_NONE;
}
+static void mg_read_one(struct mg_host *host, struct request *req)
+{
+ u16 *buff = (u16 *)req->buffer;
+ u32 i;
+
+ for (i = 0; i < MG_SECTOR_SIZE >> 1; i++)
+ *buff++ = inw((unsigned long)host->dev_base + MG_BUFF_OFFSET +
+ (i << 1));
+}
+
static void mg_read(struct request *req)
{
- u32 j;
struct mg_host *host = req->rq_disk->private_data;
if (mg_out(host, blk_rq_pos(req), blk_rq_sectors(req),
@@ -482,49 +498,65 @@ static void mg_read(struct request *req)
blk_rq_sectors(req), blk_rq_pos(req), req->buffer);
do {
- u16 *buff = (u16 *)req->buffer;
-
if (mg_wait(host, ATA_DRQ,
MG_TMAX_WAIT_RD_DRQ) != MG_ERR_NONE) {
mg_bad_rw_intr(host);
return;
}
- for (j = 0; j < MG_SECTOR_SIZE >> 1; j++)
- *buff++ = inw((unsigned long)host->dev_base +
- MG_BUFF_OFFSET + (j << 1));
+
+ mg_read_one(host, req);
outb(MG_CMD_RD_CONF, (unsigned long)host->dev_base +
MG_REG_COMMAND);
} while (mg_end_request(host, 0, MG_SECTOR_SIZE));
}
+static void mg_write_one(struct mg_host *host, struct request *req)
+{
+ u16 *buff = (u16 *)req->buffer;
+ u32 i;
+
+ for (i = 0; i < MG_SECTOR_SIZE >> 1; i++)
+ outw(*buff++, (unsigned long)host->dev_base + MG_BUFF_OFFSET +
+ (i << 1));
+}
+
static void mg_write(struct request *req)
{
- u32 j;
struct mg_host *host = req->rq_disk->private_data;
+ unsigned int rem = blk_rq_sectors(req);
- if (mg_out(host, blk_rq_pos(req), blk_rq_sectors(req),
+ if (mg_out(host, blk_rq_pos(req), rem,
MG_CMD_WR, NULL) != MG_ERR_NONE) {
mg_bad_rw_intr(host);
return;
}
MG_DBG("requested %d sects (from %ld), buffer=0x%p\n",
- blk_rq_sectors(req), blk_rq_pos(req), req->buffer);
+ rem, blk_rq_pos(req), req->buffer);
+
+ if (mg_wait(host, ATA_DRQ,
+ MG_TMAX_WAIT_WR_DRQ) != MG_ERR_NONE) {
+ mg_bad_rw_intr(host);
+ return;
+ }
do {
- u16 *buff = (u16 *)req->buffer;
+ mg_write_one(host, req);
- if (mg_wait(host, ATA_DRQ, MG_TMAX_WAIT_WR_DRQ) != MG_ERR_NONE) {
+ outb(MG_CMD_WR_CONF, (unsigned long)host->dev_base +
+ MG_REG_COMMAND);
+
+ rem--;
+ if (rem > 1 && mg_wait(host, ATA_DRQ,
+ MG_TMAX_WAIT_WR_DRQ) != MG_ERR_NONE) {
+ mg_bad_rw_intr(host);
+ return;
+ } else if (mg_wait(host, MG_STAT_READY,
+ MG_TMAX_WAIT_WR_DRQ) != MG_ERR_NONE) {
mg_bad_rw_intr(host);
return;
}
- for (j = 0; j < MG_SECTOR_SIZE >> 1; j++)
- outw(*buff++, (unsigned long)host->dev_base +
- MG_BUFF_OFFSET + (j << 1));
-
- outb(MG_CMD_WR_CONF, (unsigned long)host->dev_base +
- MG_REG_COMMAND);
} while (mg_end_request(host, 0, MG_SECTOR_SIZE));
}
@@ -532,7 +564,6 @@ static void mg_read_intr(struct mg_host *host)
{
struct request *req = host->req;
u32 i;
- u16 *buff;
/* check status */
do {
@@ -550,13 +581,7 @@ static void mg_read_intr(struct mg_host *host)
return;
ok_to_read:
- /* get current segment of request */
- buff = (u16 *)req->buffer;
-
- /* read 1 sector */
- for (i = 0; i < MG_SECTOR_SIZE >> 1; i++)
- *buff++ = inw((unsigned long)host->dev_base + MG_BUFF_OFFSET +
- (i << 1));
+ mg_read_one(host, req);
MG_DBG("sector %ld, remaining=%ld, buffer=0x%p\n",
blk_rq_pos(req), blk_rq_sectors(req) - 1, req->buffer);
@@ -575,8 +600,7 @@ ok_to_read:
static void mg_write_intr(struct mg_host *host)
{
struct request *req = host->req;
- u32 i, j;
- u16 *buff;
+ u32 i;
bool rem;
/* check status */
@@ -597,12 +621,7 @@ static void mg_write_intr(struct mg_host *host)
ok_to_write:
if ((rem = mg_end_request(host, 0, MG_SECTOR_SIZE))) {
/* write 1 sector and set handler if remains */
- buff = (u16 *)req->buffer;
- for (j = 0; j < MG_STORAGE_BUFFER_SIZE >> 1; j++) {
- outw(*buff, (unsigned long)host->dev_base +
- MG_BUFF_OFFSET + (j << 1));
- buff++;
- }
+ mg_write_one(host, req);
MG_DBG("sector %ld, remaining=%ld, buffer=0x%p\n",
blk_rq_pos(req), blk_rq_sectors(req), req->buffer);
host->mg_do_intr = mg_write_intr;
@@ -667,9 +686,6 @@ static unsigned int mg_issue_req(struct request *req,
unsigned int sect_num,
unsigned int sect_cnt)
{
- u16 *buff;
- u32 i;
-
switch (rq_data_dir(req)) {
case READ:
if (mg_out(host, sect_num, sect_cnt, MG_CMD_RD, &mg_read_intr)
@@ -693,12 +709,7 @@ static unsigned int mg_issue_req(struct request *req,
mg_bad_rw_intr(host);
return host->error;
}
- buff = (u16 *)req->buffer;
- for (i = 0; i < MG_SECTOR_SIZE >> 1; i++) {
- outw(*buff, (unsigned long)host->dev_base +
- MG_BUFF_OFFSET + (i << 1));
- buff++;
- }
+ mg_write_one(host, req);
mod_timer(&host->timer, jiffies + 3 * HZ);
outb(MG_CMD_WR_CONF, (unsigned long)host->dev_base +
MG_REG_COMMAND);
diff --git a/drivers/char/agp/parisc-agp.c b/drivers/char/agp/parisc-agp.c
index f4bb43fb801..e077701ae3d 100644
--- a/drivers/char/agp/parisc-agp.c
+++ b/drivers/char/agp/parisc-agp.c
@@ -225,7 +225,7 @@ static const struct agp_bridge_driver parisc_agp_driver = {
.configure = parisc_agp_configure,
.fetch_size = parisc_agp_fetch_size,
.tlb_flush = parisc_agp_tlbflush,
- .mask_memory = parisc_agp_mask_memory,
+ .mask_memory = parisc_agp_page_mask_memory,
.masks = parisc_agp_masks,
.agp_enable = parisc_agp_enable,
.cache_flush = global_cache_flush,
diff --git a/drivers/char/pty.c b/drivers/char/pty.c
index 6e6942c45f5..d083c73d784 100644
--- a/drivers/char/pty.c
+++ b/drivers/char/pty.c
@@ -144,6 +144,8 @@ static int pty_write(struct tty_struct *tty, const unsigned char *buf,
static int pty_write_room(struct tty_struct *tty)
{
+ if (tty->stopped)
+ return 0;
return pty_space(tty->link);
}
diff --git a/drivers/char/tty_ldisc.c b/drivers/char/tty_ldisc.c
index acd76b767d4..1733d3439ad 100644
--- a/drivers/char/tty_ldisc.c
+++ b/drivers/char/tty_ldisc.c
@@ -48,6 +48,41 @@ static DECLARE_WAIT_QUEUE_HEAD(tty_ldisc_wait);
/* Line disc dispatch table */
static struct tty_ldisc_ops *tty_ldiscs[NR_LDISCS];
+static inline struct tty_ldisc *get_ldisc(struct tty_ldisc *ld)
+{
+ if (ld)
+ atomic_inc(&ld->users);
+ return ld;
+}
+
+static void put_ldisc(struct tty_ldisc *ld)
+{
+ unsigned long flags;
+
+ if (WARN_ON_ONCE(!ld))
+ return;
+
+ /*
+ * If this is the last user, free the ldisc, and
+ * release the ldisc ops.
+ *
+ * We really want an "atomic_dec_and_lock_irqsave()",
+ * but we don't have it, so this does it by hand.
+ */
+ local_irq_save(flags);
+ if (atomic_dec_and_lock(&ld->users, &tty_ldisc_lock)) {
+ struct tty_ldisc_ops *ldo = ld->ops;
+
+ ldo->refcount--;
+ module_put(ldo->owner);
+ spin_unlock_irqrestore(&tty_ldisc_lock, flags);
+
+ kfree(ld);
+ return;
+ }
+ local_irq_restore(flags);
+}
+
/**
* tty_register_ldisc - install a line discipline
* @disc: ldisc number
@@ -142,7 +177,7 @@ static struct tty_ldisc *tty_ldisc_try_get(int disc)
/* lock it */
ldops->refcount++;
ld->ops = ldops;
- ld->refcount = 0;
+ atomic_set(&ld->users, 1);
err = 0;
}
}
@@ -181,35 +216,6 @@ static struct tty_ldisc *tty_ldisc_get(int disc)
return ld;
}
-/**
- * tty_ldisc_put - drop ldisc reference
- * @ld: ldisc
- *
- * Drop a reference to a line discipline. Manage refcounts and
- * module usage counts. Free the ldisc once the recount hits zero.
- *
- * Locking:
- * takes tty_ldisc_lock to guard against ldisc races
- */
-
-static void tty_ldisc_put(struct tty_ldisc *ld)
-{
- unsigned long flags;
- int disc = ld->ops->num;
- struct tty_ldisc_ops *ldo;
-
- BUG_ON(disc < N_TTY || disc >= NR_LDISCS);
-
- spin_lock_irqsave(&tty_ldisc_lock, flags);
- ldo = tty_ldiscs[disc];
- BUG_ON(ldo->refcount == 0);
- ldo->refcount--;
- module_put(ldo->owner);
- spin_unlock_irqrestore(&tty_ldisc_lock, flags);
- WARN_ON(ld->refcount);
- kfree(ld);
-}
-
static void *tty_ldiscs_seq_start(struct seq_file *m, loff_t *pos)
{
return (*pos < NR_LDISCS) ? pos : NULL;
@@ -234,7 +240,7 @@ static int tty_ldiscs_seq_show(struct seq_file *m, void *v)
if (IS_ERR(ld))
return 0;
seq_printf(m, "%-10s %2d\n", ld->ops->name ? ld->ops->name : "???", i);
- tty_ldisc_put(ld);
+ put_ldisc(ld);
return 0;
}
@@ -288,20 +294,17 @@ static void tty_ldisc_assign(struct tty_struct *tty, struct tty_ldisc *ld)
* Locking: takes tty_ldisc_lock
*/
-static int tty_ldisc_try(struct tty_struct *tty)
+static struct tty_ldisc *tty_ldisc_try(struct tty_struct *tty)
{
unsigned long flags;
struct tty_ldisc *ld;
- int ret = 0;
spin_lock_irqsave(&tty_ldisc_lock, flags);
- ld = tty->ldisc;
- if (test_bit(TTY_LDISC, &tty->flags)) {
- ld->refcount++;
- ret = 1;
- }
+ ld = NULL;
+ if (test_bit(TTY_LDISC, &tty->flags))
+ ld = get_ldisc(tty->ldisc);
spin_unlock_irqrestore(&tty_ldisc_lock, flags);
- return ret;
+ return ld;
}
/**
@@ -322,10 +325,11 @@ static int tty_ldisc_try(struct tty_struct *tty)
struct tty_ldisc *tty_ldisc_ref_wait(struct tty_struct *tty)
{
+ struct tty_ldisc *ld;
+
/* wait_event is a macro */
- wait_event(tty_ldisc_wait, tty_ldisc_try(tty));
- WARN_ON(tty->ldisc->refcount == 0);
- return tty->ldisc;
+ wait_event(tty_ldisc_wait, (ld = tty_ldisc_try(tty)) != NULL);
+ return ld;
}
EXPORT_SYMBOL_GPL(tty_ldisc_ref_wait);
@@ -342,9 +346,7 @@ EXPORT_SYMBOL_GPL(tty_ldisc_ref_wait);
struct tty_ldisc *tty_ldisc_ref(struct tty_struct *tty)
{
- if (tty_ldisc_try(tty))
- return tty->ldisc;
- return NULL;
+ return tty_ldisc_try(tty);
}
EXPORT_SYMBOL_GPL(tty_ldisc_ref);
@@ -360,21 +362,15 @@ EXPORT_SYMBOL_GPL(tty_ldisc_ref);
void tty_ldisc_deref(struct tty_ldisc *ld)
{
- unsigned long flags;
-
- BUG_ON(ld == NULL);
-
- spin_lock_irqsave(&tty_ldisc_lock, flags);
- if (ld->refcount == 0)
- printk(KERN_ERR "tty_ldisc_deref: no references.\n");
- else
- ld->refcount--;
- if (ld->refcount == 0)
- wake_up(&tty_ldisc_wait);
- spin_unlock_irqrestore(&tty_ldisc_lock, flags);
+ put_ldisc(ld);
}
EXPORT_SYMBOL_GPL(tty_ldisc_deref);
+static inline void tty_ldisc_put(struct tty_ldisc *ld)
+{
+ put_ldisc(ld);
+}
+
/**
* tty_ldisc_enable - allow ldisc use
* @tty: terminal to activate ldisc on
@@ -523,31 +519,6 @@ static int tty_ldisc_halt(struct tty_struct *tty)
}
/**
- * tty_ldisc_wait_idle - wait for the ldisc to become idle
- * @tty: tty to wait for
- *
- * Wait for the line discipline to become idle. The discipline must
- * have been halted for this to guarantee it remains idle.
- *
- * tty_ldisc_lock protects the ref counts currently.
- */
-
-static int tty_ldisc_wait_idle(struct tty_struct *tty)
-{
- unsigned long flags;
- spin_lock_irqsave(&tty_ldisc_lock, flags);
- while (tty->ldisc->refcount) {
- spin_unlock_irqrestore(&tty_ldisc_lock, flags);
- if (wait_event_timeout(tty_ldisc_wait,
- tty->ldisc->refcount == 0, 5 * HZ) == 0)
- return -EBUSY;
- spin_lock_irqsave(&tty_ldisc_lock, flags);
- }
- spin_unlock_irqrestore(&tty_ldisc_lock, flags);
- return 0;
-}
-
-/**
* tty_set_ldisc - set line discipline
* @tty: the terminal to set
* @ldisc: the line discipline
@@ -642,14 +613,6 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)
flush_scheduled_work();
- /* Let any existing reference holders finish */
- retval = tty_ldisc_wait_idle(tty);
- if (retval < 0) {
- clear_bit(TTY_LDISC_CHANGING, &tty->flags);
- tty_ldisc_put(new_ldisc);
- return retval;
- }
-
mutex_lock(&tty->ldisc_mutex);
if (test_bit(TTY_HUPPED, &tty->flags)) {
/* We were raced by the hangup method. It will have stomped
@@ -795,7 +758,6 @@ void tty_ldisc_hangup(struct tty_struct *tty)
if (tty->ldisc) { /* Not yet closed */
/* Switch back to N_TTY */
tty_ldisc_halt(tty);
- tty_ldisc_wait_idle(tty);
tty_ldisc_reinit(tty);
/* At this point we have a closed ldisc and we want to
reopen it. We could defer this to the next open but
@@ -860,14 +822,6 @@ void tty_ldisc_release(struct tty_struct *tty, struct tty_struct *o_tty)
tty_ldisc_halt(tty);
flush_scheduled_work();
- /*
- * Wait for any short term users (we know they are just driver
- * side waiters as the file is closing so user count on the file
- * side is zero.
- */
-
- tty_ldisc_wait_idle(tty);
-
mutex_lock(&tty->ldisc_mutex);
/*
* Now kill off the ldisc
diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c
index 2964f5f4a7e..6b3e0c2f33e 100644
--- a/drivers/clocksource/sh_cmt.c
+++ b/drivers/clocksource/sh_cmt.c
@@ -40,6 +40,7 @@ struct sh_cmt_priv {
struct platform_device *pdev;
unsigned long flags;
+ unsigned long flags_suspend;
unsigned long match_value;
unsigned long next_match_value;
unsigned long max_match_value;
@@ -667,11 +668,38 @@ static int __devexit sh_cmt_remove(struct platform_device *pdev)
return -EBUSY; /* cannot unregister clockevent and clocksource */
}
+static int sh_cmt_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct sh_cmt_priv *p = platform_get_drvdata(pdev);
+
+ /* save flag state and stop CMT channel */
+ p->flags_suspend = p->flags;
+ sh_cmt_stop(p, p->flags);
+ return 0;
+}
+
+static int sh_cmt_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct sh_cmt_priv *p = platform_get_drvdata(pdev);
+
+ /* start CMT channel from saved state */
+ sh_cmt_start(p, p->flags_suspend);
+ return 0;
+}
+
+static struct dev_pm_ops sh_cmt_dev_pm_ops = {
+ .suspend = sh_cmt_suspend,
+ .resume = sh_cmt_resume,
+};
+
static struct platform_driver sh_cmt_device_driver = {
.probe = sh_cmt_probe,
.remove = __devexit_p(sh_cmt_remove),
.driver = {
.name = "sh_cmt",
+ .pm = &sh_cmt_dev_pm_ops,
}
};
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index b90eda8b344..fd69086d08d 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -858,6 +858,8 @@ static int cpufreq_add_dev(struct sys_device *sys_dev)
/* Check for existing affected CPUs.
* They may not be aware of it due to CPU Hotplug.
+ * cpufreq_cpu_put is called when the device is removed
+ * in __cpufreq_remove_dev()
*/
managed_policy = cpufreq_cpu_get(j);
if (unlikely(managed_policy)) {
@@ -884,7 +886,7 @@ static int cpufreq_add_dev(struct sys_device *sys_dev)
ret = sysfs_create_link(&sys_dev->kobj,
&managed_policy->kobj,
"cpufreq");
- if (!ret)
+ if (ret)
cpufreq_cpu_put(managed_policy);
/*
* Success. We only needed to be added to the mask.
@@ -924,6 +926,8 @@ static int cpufreq_add_dev(struct sys_device *sys_dev)
spin_lock_irqsave(&cpufreq_driver_lock, flags);
for_each_cpu(j, policy->cpus) {
+ if (!cpu_online(j))
+ continue;
per_cpu(cpufreq_cpu_data, j) = policy;
per_cpu(policy_cpu, j) = policy->cpu;
}
@@ -1244,13 +1248,22 @@ EXPORT_SYMBOL(cpufreq_get);
static int cpufreq_suspend(struct sys_device *sysdev, pm_message_t pmsg)
{
- int cpu = sysdev->id;
int ret = 0;
+
+#ifdef __powerpc__
+ int cpu = sysdev->id;
unsigned int cur_freq = 0;
struct cpufreq_policy *cpu_policy;
dprintk("suspending cpu %u\n", cpu);
+ /*
+ * This whole bogosity is here because Powerbooks are made of fail.
+ * No sane platform should need any of the code below to be run.
+ * (it's entirely the wrong thing to do, as driver->get may
+ * reenable interrupts on some architectures).
+ */
+
if (!cpu_online(cpu))
return 0;
@@ -1309,6 +1322,7 @@ static int cpufreq_suspend(struct sys_device *sysdev, pm_message_t pmsg)
out:
cpufreq_cpu_put(cpu_policy);
+#endif /* __powerpc__ */
return ret;
}
@@ -1322,12 +1336,18 @@ out:
*/
static int cpufreq_resume(struct sys_device *sysdev)
{
- int cpu = sysdev->id;
int ret = 0;
+
+#ifdef __powerpc__
+ int cpu = sysdev->id;
struct cpufreq_policy *cpu_policy;
dprintk("resuming cpu %u\n", cpu);
+ /* As with the ->suspend method, all the code below is
+ * only necessary because Powerbooks suck.
+ * See commit 42d4dc3f4e1e for jokes. */
+
if (!cpu_online(cpu))
return 0;
@@ -1391,6 +1411,7 @@ out:
schedule_work(&cpu_policy->update);
fail:
cpufreq_cpu_put(cpu_policy);
+#endif /* __powerpc__ */
return ret;
}
diff --git a/drivers/cpufreq/cpufreq_conservative.c b/drivers/cpufreq/cpufreq_conservative.c
index 57490502b21..bdea7e2f94b 100644
--- a/drivers/cpufreq/cpufreq_conservative.c
+++ b/drivers/cpufreq/cpufreq_conservative.c
@@ -63,6 +63,7 @@ struct cpu_dbs_info_s {
unsigned int down_skip;
unsigned int requested_freq;
int cpu;
+ unsigned int enable:1;
/*
* percpu mutex that serializes governor limit change with
* do_dbs_timer invocation. We do not want do_dbs_timer to run
@@ -141,6 +142,9 @@ dbs_cpufreq_notifier(struct notifier_block *nb, unsigned long val,
struct cpufreq_policy *policy;
+ if (!this_dbs_info->enable)
+ return 0;
+
policy = this_dbs_info->cur_policy;
/*
@@ -497,6 +501,7 @@ static inline void dbs_timer_init(struct cpu_dbs_info_s *dbs_info)
int delay = usecs_to_jiffies(dbs_tuners_ins.sampling_rate);
delay -= jiffies % delay;
+ dbs_info->enable = 1;
INIT_DELAYED_WORK_DEFERRABLE(&dbs_info->work, do_dbs_timer);
queue_delayed_work_on(dbs_info->cpu, kconservative_wq, &dbs_info->work,
delay);
@@ -504,6 +509,7 @@ static inline void dbs_timer_init(struct cpu_dbs_info_s *dbs_info)
static inline void dbs_timer_exit(struct cpu_dbs_info_s *dbs_info)
{
+ dbs_info->enable = 0;
cancel_delayed_work_sync(&dbs_info->work);
}
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index 070357aaedb..81e1020fb51 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -4,7 +4,7 @@
menuconfig DMADEVICES
bool "DMA Engine support"
- depends on !HIGHMEM64G && HAS_DMA
+ depends on HAS_DMA
help
DMA engines can do asynchronous data transfers without
involving the host CPU. Currently, this framework can be
@@ -46,6 +46,14 @@ config DW_DMAC
Support the Synopsys DesignWare AHB DMA controller. This
can be integrated in chips such as the Atmel AT32ap7000.
+config AT_HDMAC
+ tristate "Atmel AHB DMA support"
+ depends on ARCH_AT91SAM9RL
+ select DMA_ENGINE
+ help
+ Support the Atmel AHB DMA controller. This can be integrated in
+ chips such as the Atmel AT91SAM9RL.
+
config FSL_DMA
tristate "Freescale Elo and Elo Plus DMA support"
depends on FSL_SOC
@@ -108,7 +116,7 @@ config NET_DMA
config ASYNC_TX_DMA
bool "Async_tx: Offload support for the async_tx api"
- depends on DMA_ENGINE
+ depends on DMA_ENGINE && !HIGHMEM64G
help
This allows the async_tx api to take advantage of offload engines for
memcpy, memset, xor, and raid6 p+q operations. If your platform has
diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
index a0b6564800c..40e1e008357 100644
--- a/drivers/dma/Makefile
+++ b/drivers/dma/Makefile
@@ -7,5 +7,6 @@ obj-$(CONFIG_INTEL_IOP_ADMA) += iop-adma.o
obj-$(CONFIG_FSL_DMA) += fsldma.o
obj-$(CONFIG_MV_XOR) += mv_xor.o
obj-$(CONFIG_DW_DMAC) += dw_dmac.o
+obj-$(CONFIG_AT_HDMAC) += at_hdmac.o
obj-$(CONFIG_MX3_IPU) += ipu/
obj-$(CONFIG_TXX9_DMAC) += txx9dmac.o
diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c
new file mode 100644
index 00000000000..9a1e5fb412e
--- /dev/null
+++ b/drivers/dma/at_hdmac.c
@@ -0,0 +1,1213 @@
+/*
+ * Driver for the Atmel AHB DMA Controller (aka HDMA or DMAC on AT91 systems)
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ *
+ * This supports the Atmel AHB DMA Controller,
+ *
+ * The driver has currently been tested with the Atmel AT91SAM9RL
+ * and AT91SAM9G45 series.
+ */
+
+#include <linux/clk.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmapool.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include "at_hdmac_regs.h"
+
+/*
+ * Glossary
+ * --------
+ *
+ * at_hdmac : Name of the ATmel AHB DMA Controller
+ * at_dma_ / atdma : ATmel DMA controller entity related
+ * atc_ / atchan : ATmel DMA Channel entity related
+ */
+
+#define ATC_DEFAULT_CFG (ATC_FIFOCFG_HALFFIFO)
+#define ATC_DEFAULT_CTRLA (0)
+#define ATC_DEFAULT_CTRLB (ATC_SIF(0) \
+ |ATC_DIF(1))
+
+/*
+ * Initial number of descriptors to allocate for each channel. This could
+ * be increased during dma usage.
+ */
+static unsigned int init_nr_desc_per_channel = 64;
+module_param(init_nr_desc_per_channel, uint, 0644);
+MODULE_PARM_DESC(init_nr_desc_per_channel,
+ "initial descriptors per channel (default: 64)");
+
+
+/* prototypes */
+static dma_cookie_t atc_tx_submit(struct dma_async_tx_descriptor *tx);
+
+
+/*----------------------------------------------------------------------*/
+
+static struct at_desc *atc_first_active(struct at_dma_chan *atchan)
+{
+ return list_first_entry(&atchan->active_list,
+ struct at_desc, desc_node);
+}
+
+static struct at_desc *atc_first_queued(struct at_dma_chan *atchan)
+{
+ return list_first_entry(&atchan->queue,
+ struct at_desc, desc_node);
+}
+
+/**
+ * atc_alloc_descriptor - allocate and return an initilized descriptor
+ * @chan: the channel to allocate descriptors for
+ * @gfp_flags: GFP allocation flags
+ *
+ * Note: The ack-bit is positioned in the descriptor flag at creation time
+ * to make initial allocation more convenient. This bit will be cleared
+ * and control will be given to client at usage time (during
+ * preparation functions).
+ */
+static struct at_desc *atc_alloc_descriptor(struct dma_chan *chan,
+ gfp_t gfp_flags)
+{
+ struct at_desc *desc = NULL;
+ struct at_dma *atdma = to_at_dma(chan->device);
+ dma_addr_t phys;
+
+ desc = dma_pool_alloc(atdma->dma_desc_pool, gfp_flags, &phys);
+ if (desc) {
+ memset(desc, 0, sizeof(struct at_desc));
+ dma_async_tx_descriptor_init(&desc->txd, chan);
+ /* txd.flags will be overwritten in prep functions */
+ desc->txd.flags = DMA_CTRL_ACK;
+ desc->txd.tx_submit = atc_tx_submit;
+ desc->txd.phys = phys;
+ }
+
+ return desc;
+}
+
+/**
+ * atc_desc_get - get a unsused descriptor from free_list
+ * @atchan: channel we want a new descriptor for
+ */
+static struct at_desc *atc_desc_get(struct at_dma_chan *atchan)
+{
+ struct at_desc *desc, *_desc;
+ struct at_desc *ret = NULL;
+ unsigned int i = 0;
+ LIST_HEAD(tmp_list);
+
+ spin_lock_bh(&atchan->lock);
+ list_for_each_entry_safe(desc, _desc, &atchan->free_list, desc_node) {
+ i++;
+ if (async_tx_test_ack(&desc->txd)) {
+ list_del(&desc->desc_node);
+ ret = desc;
+ break;
+ }
+ dev_dbg(chan2dev(&atchan->chan_common),
+ "desc %p not ACKed\n", desc);
+ }
+ spin_unlock_bh(&atchan->lock);
+ dev_vdbg(chan2dev(&atchan->chan_common),
+ "scanned %u descriptors on freelist\n", i);
+
+ /* no more descriptor available in initial pool: create one more */
+ if (!ret) {
+ ret = atc_alloc_descriptor(&atchan->chan_common, GFP_ATOMIC);
+ if (ret) {
+ spin_lock_bh(&atchan->lock);
+ atchan->descs_allocated++;
+ spin_unlock_bh(&atchan->lock);
+ } else {
+ dev_err(chan2dev(&atchan->chan_common),
+ "not enough descriptors available\n");
+ }
+ }
+
+ return ret;
+}
+
+/**
+ * atc_desc_put - move a descriptor, including any children, to the free list
+ * @atchan: channel we work on
+ * @desc: descriptor, at the head of a chain, to move to free list
+ */
+static void atc_desc_put(struct at_dma_chan *atchan, struct at_desc *desc)
+{
+ if (desc) {
+ struct at_desc *child;
+
+ spin_lock_bh(&atchan->lock);
+ list_for_each_entry(child, &desc->txd.tx_list, desc_node)
+ dev_vdbg(chan2dev(&atchan->chan_common),
+ "moving child desc %p to freelist\n",
+ child);
+ list_splice_init(&desc->txd.tx_list, &atchan->free_list);
+ dev_vdbg(chan2dev(&atchan->chan_common),
+ "moving desc %p to freelist\n", desc);
+ list_add(&desc->desc_node, &atchan->free_list);
+ spin_unlock_bh(&atchan->lock);
+ }
+}
+
+/**
+ * atc_assign_cookie - compute and assign new cookie
+ * @atchan: channel we work on
+ * @desc: descriptor to asign cookie for
+ *
+ * Called with atchan->lock held and bh disabled
+ */
+static dma_cookie_t
+atc_assign_cookie(struct at_dma_chan *atchan, struct at_desc *desc)
+{
+ dma_cookie_t cookie = atchan->chan_common.cookie;
+
+ if (++cookie < 0)
+ cookie = 1;
+
+ atchan->chan_common.cookie = cookie;
+ desc->txd.cookie = cookie;
+
+ return cookie;
+}
+
+/**
+ * atc_dostart - starts the DMA engine for real
+ * @atchan: the channel we want to start
+ * @first: first descriptor in the list we want to begin with
+ *
+ * Called with atchan->lock held and bh disabled
+ */
+static void atc_dostart(struct at_dma_chan *atchan, struct at_desc *first)
+{
+ struct at_dma *atdma = to_at_dma(atchan->chan_common.device);
+
+ /* ASSERT: channel is idle */
+ if (atc_chan_is_enabled(atchan)) {
+ dev_err(chan2dev(&atchan->chan_common),
+ "BUG: Attempted to start non-idle channel\n");
+ dev_err(chan2dev(&atchan->chan_common),
+ " channel: s0x%x d0x%x ctrl0x%x:0x%x l0x%x\n",
+ channel_readl(atchan, SADDR),
+ channel_readl(atchan, DADDR),
+ channel_readl(atchan, CTRLA),
+ channel_readl(atchan, CTRLB),
+ channel_readl(atchan, DSCR));
+
+ /* The tasklet will hopefully advance the queue... */
+ return;
+ }
+
+ vdbg_dump_regs(atchan);
+
+ /* clear any pending interrupt */
+ while (dma_readl(atdma, EBCISR))
+ cpu_relax();
+
+ channel_writel(atchan, SADDR, 0);
+ channel_writel(atchan, DADDR, 0);
+ channel_writel(atchan, CTRLA, 0);
+ channel_writel(atchan, CTRLB, 0);
+ channel_writel(atchan, DSCR, first->txd.phys);
+ dma_writel(atdma, CHER, atchan->mask);
+
+ vdbg_dump_regs(atchan);
+}
+
+/**
+ * atc_chain_complete - finish work for one transaction chain
+ * @atchan: channel we work on
+ * @desc: descriptor at the head of the chain we want do complete
+ *
+ * Called with atchan->lock held and bh disabled */
+static void
+atc_chain_complete(struct at_dma_chan *atchan, struct at_desc *desc)
+{
+ dma_async_tx_callback callback;
+ void *param;
+ struct dma_async_tx_descriptor *txd = &desc->txd;
+
+ dev_vdbg(chan2dev(&atchan->chan_common),
+ "descriptor %u complete\n", txd->cookie);
+
+ atchan->completed_cookie = txd->cookie;
+ callback = txd->callback;
+ param = txd->callback_param;
+
+ /* move children to free_list */
+ list_splice_init(&txd->tx_list, &atchan->free_list);
+ /* move myself to free_list */
+ list_move(&desc->desc_node, &atchan->free_list);
+
+ /* unmap dma addresses */
+ if (!(txd->flags & DMA_COMPL_SKIP_DEST_UNMAP)) {
+ if (txd->flags & DMA_COMPL_DEST_UNMAP_SINGLE)
+ dma_unmap_single(chan2parent(&atchan->chan_common),
+ desc->lli.daddr,
+ desc->len, DMA_FROM_DEVICE);
+ else
+ dma_unmap_page(chan2parent(&atchan->chan_common),
+ desc->lli.daddr,
+ desc->len, DMA_FROM_DEVICE);
+ }
+ if (!(txd->flags & DMA_COMPL_SKIP_SRC_UNMAP)) {
+ if (txd->flags & DMA_COMPL_SRC_UNMAP_SINGLE)
+ dma_unmap_single(chan2parent(&atchan->chan_common),
+ desc->lli.saddr,
+ desc->len, DMA_TO_DEVICE);
+ else
+ dma_unmap_page(chan2parent(&atchan->chan_common),
+ desc->lli.saddr,
+ desc->len, DMA_TO_DEVICE);
+ }
+
+ /*
+ * The API requires that no submissions are done from a
+ * callback, so we don't need to drop the lock here
+ */
+ if (callback)
+ callback(param);
+
+ dma_run_dependencies(txd);
+}
+
+/**
+ * atc_complete_all - finish work for all transactions
+ * @atchan: channel to complete transactions for
+ *
+ * Eventually submit queued descriptors if any
+ *
+ * Assume channel is idle while calling this function
+ * Called with atchan->lock held and bh disabled
+ */
+static void atc_complete_all(struct at_dma_chan *atchan)
+{
+ struct at_desc *desc, *_desc;
+ LIST_HEAD(list);
+
+ dev_vdbg(chan2dev(&atchan->chan_common), "complete all\n");
+
+ BUG_ON(atc_chan_is_enabled(atchan));
+
+ /*
+ * Submit queued descriptors ASAP, i.e. before we go through
+ * the completed ones.
+ */
+ if (!list_empty(&atchan->queue))
+ atc_dostart(atchan, atc_first_queued(atchan));
+ /* empty active_list now it is completed */
+ list_splice_init(&atchan->active_list, &list);
+ /* empty queue list by moving descriptors (if any) to active_list */
+ list_splice_init(&atchan->queue, &atchan->active_list);
+
+ list_for_each_entry_safe(desc, _desc, &list, desc_node)
+ atc_chain_complete(atchan, desc);
+}
+
+/**
+ * atc_cleanup_descriptors - cleanup up finished descriptors in active_list
+ * @atchan: channel to be cleaned up
+ *
+ * Called with atchan->lock held and bh disabled
+ */
+static void atc_cleanup_descriptors(struct at_dma_chan *atchan)
+{
+ struct at_desc *desc, *_desc;
+ struct at_desc *child;
+
+ dev_vdbg(chan2dev(&atchan->chan_common), "cleanup descriptors\n");
+
+ list_for_each_entry_safe(desc, _desc, &atchan->active_list, desc_node) {
+ if (!(desc->lli.ctrla & ATC_DONE))
+ /* This one is currently in progress */
+ return;
+
+ list_for_each_entry(child, &desc->txd.tx_list, desc_node)
+ if (!(child->lli.ctrla & ATC_DONE))
+ /* Currently in progress */
+ return;
+
+ /*
+ * No descriptors so far seem to be in progress, i.e.
+ * this chain must be done.
+ */
+ atc_chain_complete(atchan, desc);
+ }
+}
+
+/**
+ * atc_advance_work - at the end of a transaction, move forward
+ * @atchan: channel where the transaction ended
+ *
+ * Called with atchan->lock held and bh disabled
+ */
+static void atc_advance_work(struct at_dma_chan *atchan)
+{
+ dev_vdbg(chan2dev(&atchan->chan_common), "advance_work\n");
+
+ if (list_empty(&atchan->active_list) ||
+ list_is_singular(&atchan->active_list)) {
+ atc_complete_all(atchan);
+ } else {
+ atc_chain_complete(atchan, atc_first_active(atchan));
+ /* advance work */
+ atc_dostart(atchan, atc_first_active(atchan));
+ }
+}
+
+
+/**
+ * atc_handle_error - handle errors reported by DMA controller
+ * @atchan: channel where error occurs
+ *
+ * Called with atchan->lock held and bh disabled
+ */
+static void atc_handle_error(struct at_dma_chan *atchan)
+{
+ struct at_desc *bad_desc;
+ struct at_desc *child;
+
+ /*
+ * The descriptor currently at the head of the active list is
+ * broked. Since we don't have any way to report errors, we'll
+ * just have to scream loudly and try to carry on.
+ */
+ bad_desc = atc_first_active(atchan);
+ list_del_init(&bad_desc->desc_node);
+
+ /* As we are stopped, take advantage to push queued descriptors
+ * in active_list */
+ list_splice_init(&atchan->queue, atchan->active_list.prev);
+
+ /* Try to restart the controller */
+ if (!list_empty(&atchan->active_list))
+ atc_dostart(atchan, atc_first_active(atchan));
+
+ /*
+ * KERN_CRITICAL may seem harsh, but since this only happens
+ * when someone submits a bad physical address in a
+ * descriptor, we should consider ourselves lucky that the
+ * controller flagged an error instead of scribbling over
+ * random memory locations.
+ */
+ dev_crit(chan2dev(&atchan->chan_common),
+ "Bad descriptor submitted for DMA!\n");
+ dev_crit(chan2dev(&atchan->chan_common),
+ " cookie: %d\n", bad_desc->txd.cookie);
+ atc_dump_lli(atchan, &bad_desc->lli);
+ list_for_each_entry(child, &bad_desc->txd.tx_list, desc_node)
+ atc_dump_lli(atchan, &child->lli);
+
+ /* Pretend the descriptor completed successfully */
+ atc_chain_complete(atchan, bad_desc);
+}
+
+
+/*-- IRQ & Tasklet ---------------------------------------------------*/
+
+static void atc_tasklet(unsigned long data)
+{
+ struct at_dma_chan *atchan = (struct at_dma_chan *)data;
+
+ /* Channel cannot be enabled here */
+ if (atc_chan_is_enabled(atchan)) {
+ dev_err(chan2dev(&atchan->chan_common),
+ "BUG: channel enabled in tasklet\n");
+ return;
+ }
+
+ spin_lock(&atchan->lock);
+ if (test_and_clear_bit(0, &atchan->error_status))
+ atc_handle_error(atchan);
+ else
+ atc_advance_work(atchan);
+
+ spin_unlock(&atchan->lock);
+}
+
+static irqreturn_t at_dma_interrupt(int irq, void *dev_id)
+{
+ struct at_dma *atdma = (struct at_dma *)dev_id;
+ struct at_dma_chan *atchan;
+ int i;
+ u32 status, pending, imr;
+ int ret = IRQ_NONE;
+
+ do {
+ imr = dma_readl(atdma, EBCIMR);
+ status = dma_readl(atdma, EBCISR);
+ pending = status & imr;
+
+ if (!pending)
+ break;
+
+ dev_vdbg(atdma->dma_common.dev,
+ "interrupt: status = 0x%08x, 0x%08x, 0x%08x\n",
+ status, imr, pending);
+
+ for (i = 0; i < atdma->dma_common.chancnt; i++) {
+ atchan = &atdma->chan[i];
+ if (pending & (AT_DMA_CBTC(i) | AT_DMA_ERR(i))) {
+ if (pending & AT_DMA_ERR(i)) {
+ /* Disable channel on AHB error */
+ dma_writel(atdma, CHDR, atchan->mask);
+ /* Give information to tasklet */
+ set_bit(0, &atchan->error_status);
+ }
+ tasklet_schedule(&atchan->tasklet);
+ ret = IRQ_HANDLED;
+ }
+ }
+
+ } while (pending);
+
+ return ret;
+}
+
+
+/*-- DMA Engine API --------------------------------------------------*/
+
+/**
+ * atc_tx_submit - set the prepared descriptor(s) to be executed by the engine
+ * @desc: descriptor at the head of the transaction chain
+ *
+ * Queue chain if DMA engine is working already
+ *
+ * Cookie increment and adding to active_list or queue must be atomic
+ */
+static dma_cookie_t atc_tx_submit(struct dma_async_tx_descriptor *tx)
+{
+ struct at_desc *desc = txd_to_at_desc(tx);
+ struct at_dma_chan *atchan = to_at_dma_chan(tx->chan);
+ dma_cookie_t cookie;
+
+ spin_lock_bh(&atchan->lock);
+ cookie = atc_assign_cookie(atchan, desc);
+
+ if (list_empty(&atchan->active_list)) {
+ dev_vdbg(chan2dev(tx->chan), "tx_submit: started %u\n",
+ desc->txd.cookie);
+ atc_dostart(atchan, desc);
+ list_add_tail(&desc->desc_node, &atchan->active_list);
+ } else {
+ dev_vdbg(chan2dev(tx->chan), "tx_submit: queued %u\n",
+ desc->txd.cookie);
+ list_add_tail(&desc->desc_node, &atchan->queue);
+ }
+
+ spin_unlock_bh(&atchan->lock);
+
+ return cookie;
+}
+
+/**
+ * atc_prep_dma_memcpy - prepare a memcpy operation
+ * @chan: the channel to prepare operation on
+ * @dest: operation virtual destination address
+ * @src: operation virtual source address
+ * @len: operation length
+ * @flags: tx descriptor status flags
+ */
+static struct dma_async_tx_descriptor *
+atc_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dest, dma_addr_t src,
+ size_t len, unsigned long flags)
+{
+ struct at_dma_chan *atchan = to_at_dma_chan(chan);
+ struct at_desc *desc = NULL;
+ struct at_desc *first = NULL;
+ struct at_desc *prev = NULL;
+ size_t xfer_count;
+ size_t offset;
+ unsigned int src_width;
+ unsigned int dst_width;
+ u32 ctrla;
+ u32 ctrlb;
+
+ dev_vdbg(chan2dev(chan), "prep_dma_memcpy: d0x%x s0x%x l0x%zx f0x%lx\n",
+ dest, src, len, flags);
+
+ if (unlikely(!len)) {
+ dev_dbg(chan2dev(chan), "prep_dma_memcpy: length is zero!\n");
+ return NULL;
+ }
+
+ ctrla = ATC_DEFAULT_CTRLA;
+ ctrlb = ATC_DEFAULT_CTRLB
+ | ATC_SRC_ADDR_MODE_INCR
+ | ATC_DST_ADDR_MODE_INCR
+ | ATC_FC_MEM2MEM;
+
+ /*
+ * We can be a lot more clever here, but this should take care
+ * of the most common optimization.
+ */
+ if (!((src | dest | len) & 3)) {
+ ctrla |= ATC_SRC_WIDTH_WORD | ATC_DST_WIDTH_WORD;
+ src_width = dst_width = 2;
+ } else if (!((src | dest | len) & 1)) {
+ ctrla |= ATC_SRC_WIDTH_HALFWORD | ATC_DST_WIDTH_HALFWORD;
+ src_width = dst_width = 1;
+ } else {
+ ctrla |= ATC_SRC_WIDTH_BYTE | ATC_DST_WIDTH_BYTE;
+ src_width = dst_width = 0;
+ }
+
+ for (offset = 0; offset < len; offset += xfer_count << src_width) {
+ xfer_count = min_t(size_t, (len - offset) >> src_width,
+ ATC_BTSIZE_MAX);
+
+ desc = atc_desc_get(atchan);
+ if (!desc)
+ goto err_desc_get;
+
+ desc->lli.saddr = src + offset;
+ desc->lli.daddr = dest + offset;
+ desc->lli.ctrla = ctrla | xfer_count;
+ desc->lli.ctrlb = ctrlb;
+
+ desc->txd.cookie = 0;
+ async_tx_ack(&desc->txd);
+
+ if (!first) {
+ first = desc;
+ } else {
+ /* inform the HW lli about chaining */
+ prev->lli.dscr = desc->txd.phys;
+ /* insert the link descriptor to the LD ring */
+ list_add_tail(&desc->desc_node,
+ &first->txd.tx_list);
+ }
+ prev = desc;
+ }
+
+ /* First descriptor of the chain embedds additional information */
+ first->txd.cookie = -EBUSY;
+ first->len = len;
+
+ /* set end-of-link to the last link descriptor of list*/
+ set_desc_eol(desc);
+
+ desc->txd.flags = flags; /* client is in control of this ack */
+
+ return &first->txd;
+
+err_desc_get:
+ atc_desc_put(atchan, first);
+ return NULL;
+}
+
+
+/**
+ * atc_prep_slave_sg - prepare descriptors for a DMA_SLAVE transaction
+ * @chan: DMA channel
+ * @sgl: scatterlist to transfer to/from
+ * @sg_len: number of entries in @scatterlist
+ * @direction: DMA direction
+ * @flags: tx descriptor status flags
+ */
+static struct dma_async_tx_descriptor *
+atc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
+ unsigned int sg_len, enum dma_data_direction direction,
+ unsigned long flags)
+{
+ struct at_dma_chan *atchan = to_at_dma_chan(chan);
+ struct at_dma_slave *atslave = chan->private;
+ struct at_desc *first = NULL;
+ struct at_desc *prev = NULL;
+ u32 ctrla;
+ u32 ctrlb;
+ dma_addr_t reg;
+ unsigned int reg_width;
+ unsigned int mem_width;
+ unsigned int i;
+ struct scatterlist *sg;
+ size_t total_len = 0;
+
+ dev_vdbg(chan2dev(chan), "prep_slave_sg: %s f0x%lx\n",
+ direction == DMA_TO_DEVICE ? "TO DEVICE" : "FROM DEVICE",
+ flags);
+
+ if (unlikely(!atslave || !sg_len)) {
+ dev_dbg(chan2dev(chan), "prep_dma_memcpy: length is zero!\n");
+ return NULL;
+ }
+
+ reg_width = atslave->reg_width;
+
+ sg_len = dma_map_sg(chan2parent(chan), sgl, sg_len, direction);
+
+ ctrla = ATC_DEFAULT_CTRLA | atslave->ctrla;
+ ctrlb = ATC_DEFAULT_CTRLB | ATC_IEN;
+
+ switch (direction) {
+ case DMA_TO_DEVICE:
+ ctrla |= ATC_DST_WIDTH(reg_width);
+ ctrlb |= ATC_DST_ADDR_MODE_FIXED
+ | ATC_SRC_ADDR_MODE_INCR
+ | ATC_FC_MEM2PER;
+ reg = atslave->tx_reg;
+ for_each_sg(sgl, sg, sg_len, i) {
+ struct at_desc *desc;
+ u32 len;
+ u32 mem;
+
+ desc = atc_desc_get(atchan);
+ if (!desc)
+ goto err_desc_get;
+
+ mem = sg_phys(sg);
+ len = sg_dma_len(sg);
+ mem_width = 2;
+ if (unlikely(mem & 3 || len & 3))
+ mem_width = 0;
+
+ desc->lli.saddr = mem;
+ desc->lli.daddr = reg;
+ desc->lli.ctrla = ctrla
+ | ATC_SRC_WIDTH(mem_width)
+ | len >> mem_width;
+ desc->lli.ctrlb = ctrlb;
+
+ if (!first) {
+ first = desc;
+ } else {
+ /* inform the HW lli about chaining */
+ prev->lli.dscr = desc->txd.phys;
+ /* insert the link descriptor to the LD ring */
+ list_add_tail(&desc->desc_node,
+ &first->txd.tx_list);
+ }
+ prev = desc;
+ total_len += len;
+ }
+ break;
+ case DMA_FROM_DEVICE:
+ ctrla |= ATC_SRC_WIDTH(reg_width);
+ ctrlb |= ATC_DST_ADDR_MODE_INCR
+ | ATC_SRC_ADDR_MODE_FIXED
+ | ATC_FC_PER2MEM;
+
+ reg = atslave->rx_reg;
+ for_each_sg(sgl, sg, sg_len, i) {
+ struct at_desc *desc;
+ u32 len;
+ u32 mem;
+
+ desc = atc_desc_get(atchan);
+ if (!desc)
+ goto err_desc_get;
+
+ mem = sg_phys(sg);
+ len = sg_dma_len(sg);
+ mem_width = 2;
+ if (unlikely(mem & 3 || len & 3))
+ mem_width = 0;
+
+ desc->lli.saddr = reg;
+ desc->lli.daddr = mem;
+ desc->lli.ctrla = ctrla
+ | ATC_DST_WIDTH(mem_width)
+ | len >> mem_width;
+ desc->lli.ctrlb = ctrlb;
+
+ if (!first) {
+ first = desc;
+ } else {
+ /* inform the HW lli about chaining */
+ prev->lli.dscr = desc->txd.phys;
+ /* insert the link descriptor to the LD ring */
+ list_add_tail(&desc->desc_node,
+ &first->txd.tx_list);
+ }
+ prev = desc;
+ total_len += len;
+ }
+ break;
+ default:
+ return NULL;
+ }
+
+ /* set end-of-link to the last link descriptor of list*/
+ set_desc_eol(prev);
+
+ /* First descriptor of the chain embedds additional information */
+ first->txd.cookie = -EBUSY;
+ first->len = total_len;
+
+ /* last link descriptor of list is responsible of flags */
+ prev->txd.flags = flags; /* client is in control of this ack */
+
+ return &first->txd;
+
+err_desc_get:
+ dev_err(chan2dev(chan), "not enough descriptors available\n");
+ atc_desc_put(atchan, first);
+ return NULL;
+}
+
+static void atc_terminate_all(struct dma_chan *chan)
+{
+ struct at_dma_chan *atchan = to_at_dma_chan(chan);
+ struct at_dma *atdma = to_at_dma(chan->device);
+ struct at_desc *desc, *_desc;
+ LIST_HEAD(list);
+
+ /*
+ * This is only called when something went wrong elsewhere, so
+ * we don't really care about the data. Just disable the
+ * channel. We still have to poll the channel enable bit due
+ * to AHB/HSB limitations.
+ */
+ spin_lock_bh(&atchan->lock);
+
+ dma_writel(atdma, CHDR, atchan->mask);
+
+ /* confirm that this channel is disabled */
+ while (dma_readl(atdma, CHSR) & atchan->mask)
+ cpu_relax();
+
+ /* active_list entries will end up before queued entries */
+ list_splice_init(&atchan->queue, &list);
+ list_splice_init(&atchan->active_list, &list);
+
+ spin_unlock_bh(&atchan->lock);
+
+ /* Flush all pending and queued descriptors */
+ list_for_each_entry_safe(desc, _desc, &list, desc_node)
+ atc_chain_complete(atchan, desc);
+}
+
+/**
+ * atc_is_tx_complete - poll for transaction completion
+ * @chan: DMA channel
+ * @cookie: transaction identifier to check status of
+ * @done: if not %NULL, updated with last completed transaction
+ * @used: if not %NULL, updated with last used transaction
+ *
+ * If @done and @used are passed in, upon return they reflect the driver
+ * internal state and can be used with dma_async_is_complete() to check
+ * the status of multiple cookies without re-checking hardware state.
+ */
+static enum dma_status
+atc_is_tx_complete(struct dma_chan *chan,
+ dma_cookie_t cookie,
+ dma_cookie_t *done, dma_cookie_t *used)
+{
+ struct at_dma_chan *atchan = to_at_dma_chan(chan);
+ dma_cookie_t last_used;
+ dma_cookie_t last_complete;
+ enum dma_status ret;
+
+ dev_vdbg(chan2dev(chan), "is_tx_complete: %d (d%d, u%d)\n",
+ cookie, done ? *done : 0, used ? *used : 0);
+
+ spin_lock_bh(atchan->lock);
+
+ last_complete = atchan->completed_cookie;
+ last_used = chan->cookie;
+
+ ret = dma_async_is_complete(cookie, last_complete, last_used);
+ if (ret != DMA_SUCCESS) {
+ atc_cleanup_descriptors(atchan);
+
+ last_complete = atchan->completed_cookie;
+ last_used = chan->cookie;
+
+ ret = dma_async_is_complete(cookie, last_complete, last_used);
+ }
+
+ spin_unlock_bh(atchan->lock);
+
+ if (done)
+ *done = last_complete;
+ if (used)
+ *used = last_used;
+
+ return ret;
+}
+
+/**
+ * atc_issue_pending - try to finish work
+ * @chan: target DMA channel
+ */
+static void atc_issue_pending(struct dma_chan *chan)
+{
+ struct at_dma_chan *atchan = to_at_dma_chan(chan);
+
+ dev_vdbg(chan2dev(chan), "issue_pending\n");
+
+ if (!atc_chan_is_enabled(atchan)) {
+ spin_lock_bh(&atchan->lock);
+ atc_advance_work(atchan);
+ spin_unlock_bh(&atchan->lock);
+ }
+}
+
+/**
+ * atc_alloc_chan_resources - allocate resources for DMA channel
+ * @chan: allocate descriptor resources for this channel
+ * @client: current client requesting the channel be ready for requests
+ *
+ * return - the number of allocated descriptors
+ */
+static int atc_alloc_chan_resources(struct dma_chan *chan)
+{
+ struct at_dma_chan *atchan = to_at_dma_chan(chan);
+ struct at_dma *atdma = to_at_dma(chan->device);
+ struct at_desc *desc;
+ struct at_dma_slave *atslave;
+ int i;
+ u32 cfg;
+ LIST_HEAD(tmp_list);
+
+ dev_vdbg(chan2dev(chan), "alloc_chan_resources\n");
+
+ /* ASSERT: channel is idle */
+ if (atc_chan_is_enabled(atchan)) {
+ dev_dbg(chan2dev(chan), "DMA channel not idle ?\n");
+ return -EIO;
+ }
+
+ cfg = ATC_DEFAULT_CFG;
+
+ atslave = chan->private;
+ if (atslave) {
+ /*
+ * We need controller-specific data to set up slave
+ * transfers.
+ */
+ BUG_ON(!atslave->dma_dev || atslave->dma_dev != atdma->dma_common.dev);
+
+ /* if cfg configuration specified take it instad of default */
+ if (atslave->cfg)
+ cfg = atslave->cfg;
+ }
+
+ /* have we already been set up?
+ * reconfigure channel but no need to reallocate descriptors */
+ if (!list_empty(&atchan->free_list))
+ return atchan->descs_allocated;
+
+ /* Allocate initial pool of descriptors */
+ for (i = 0; i < init_nr_desc_per_channel; i++) {
+ desc = atc_alloc_descriptor(chan, GFP_KERNEL);
+ if (!desc) {
+ dev_err(atdma->dma_common.dev,
+ "Only %d initial descriptors\n", i);
+ break;
+ }
+ list_add_tail(&desc->desc_node, &tmp_list);
+ }
+
+ spin_lock_bh(&atchan->lock);
+ atchan->descs_allocated = i;
+ list_splice(&tmp_list, &atchan->free_list);
+ atchan->completed_cookie = chan->cookie = 1;
+ spin_unlock_bh(&atchan->lock);
+
+ /* channel parameters */
+ channel_writel(atchan, CFG, cfg);
+
+ dev_dbg(chan2dev(chan),
+ "alloc_chan_resources: allocated %d descriptors\n",
+ atchan->descs_allocated);
+
+ return atchan->descs_allocated;
+}
+
+/**
+ * atc_free_chan_resources - free all channel resources
+ * @chan: DMA channel
+ */
+static void atc_free_chan_resources(struct dma_chan *chan)
+{
+ struct at_dma_chan *atchan = to_at_dma_chan(chan);
+ struct at_dma *atdma = to_at_dma(chan->device);
+ struct at_desc *desc, *_desc;
+ LIST_HEAD(list);
+
+ dev_dbg(chan2dev(chan), "free_chan_resources: (descs allocated=%u)\n",
+ atchan->descs_allocated);
+
+ /* ASSERT: channel is idle */
+ BUG_ON(!list_empty(&atchan->active_list));
+ BUG_ON(!list_empty(&atchan->queue));
+ BUG_ON(atc_chan_is_enabled(atchan));
+
+ list_for_each_entry_safe(desc, _desc, &atchan->free_list, desc_node) {
+ dev_vdbg(chan2dev(chan), " freeing descriptor %p\n", desc);
+ list_del(&desc->desc_node);
+ /* free link descriptor */
+ dma_pool_free(atdma->dma_desc_pool, desc, desc->txd.phys);
+ }
+ list_splice_init(&atchan->free_list, &list);
+ atchan->descs_allocated = 0;
+
+ dev_vdbg(chan2dev(chan), "free_chan_resources: done\n");
+}
+
+
+/*-- Module Management -----------------------------------------------*/
+
+/**
+ * at_dma_off - disable DMA controller
+ * @atdma: the Atmel HDAMC device
+ */
+static void at_dma_off(struct at_dma *atdma)
+{
+ dma_writel(atdma, EN, 0);
+
+ /* disable all interrupts */
+ dma_writel(atdma, EBCIDR, -1L);
+
+ /* confirm that all channels are disabled */
+ while (dma_readl(atdma, CHSR) & atdma->all_chan_mask)
+ cpu_relax();
+}
+
+static int __init at_dma_probe(struct platform_device *pdev)
+{
+ struct at_dma_platform_data *pdata;
+ struct resource *io;
+ struct at_dma *atdma;
+ size_t size;
+ int irq;
+ int err;
+ int i;
+
+ /* get DMA Controller parameters from platform */
+ pdata = pdev->dev.platform_data;
+ if (!pdata || pdata->nr_channels > AT_DMA_MAX_NR_CHANNELS)
+ return -EINVAL;
+
+ io = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!io)
+ return -EINVAL;
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return irq;
+
+ size = sizeof(struct at_dma);
+ size += pdata->nr_channels * sizeof(struct at_dma_chan);
+ atdma = kzalloc(size, GFP_KERNEL);
+ if (!atdma)
+ return -ENOMEM;
+
+ /* discover transaction capabilites from the platform data */
+ atdma->dma_common.cap_mask = pdata->cap_mask;
+ atdma->all_chan_mask = (1 << pdata->nr_channels) - 1;
+
+ size = io->end - io->start + 1;
+ if (!request_mem_region(io->start, size, pdev->dev.driver->name)) {
+ err = -EBUSY;
+ goto err_kfree;
+ }
+
+ atdma->regs = ioremap(io->start, size);
+ if (!atdma->regs) {
+ err = -ENOMEM;
+ goto err_release_r;
+ }
+
+ atdma->clk = clk_get(&pdev->dev, "dma_clk");
+ if (IS_ERR(atdma->clk)) {
+ err = PTR_ERR(atdma->clk);
+ goto err_clk;
+ }
+ clk_enable(atdma->clk);
+
+ /* force dma off, just in case */
+ at_dma_off(atdma);
+
+ err = request_irq(irq, at_dma_interrupt, 0, "at_hdmac", atdma);
+ if (err)
+ goto err_irq;
+
+ platform_set_drvdata(pdev, atdma);
+
+ /* create a pool of consistent memory blocks for hardware descriptors */
+ atdma->dma_desc_pool = dma_pool_create("at_hdmac_desc_pool",
+ &pdev->dev, sizeof(struct at_desc),
+ 4 /* word alignment */, 0);
+ if (!atdma->dma_desc_pool) {
+ dev_err(&pdev->dev, "No memory for descriptors dma pool\n");
+ err = -ENOMEM;
+ goto err_pool_create;
+ }
+
+ /* clear any pending interrupt */
+ while (dma_readl(atdma, EBCISR))
+ cpu_relax();
+
+ /* initialize channels related values */
+ INIT_LIST_HEAD(&atdma->dma_common.channels);
+ for (i = 0; i < pdata->nr_channels; i++, atdma->dma_common.chancnt++) {
+ struct at_dma_chan *atchan = &atdma->chan[i];
+
+ atchan->chan_common.device = &atdma->dma_common;
+ atchan->chan_common.cookie = atchan->completed_cookie = 1;
+ atchan->chan_common.chan_id = i;
+ list_add_tail(&atchan->chan_common.device_node,
+ &atdma->dma_common.channels);
+
+ atchan->ch_regs = atdma->regs + ch_regs(i);
+ spin_lock_init(&atchan->lock);
+ atchan->mask = 1 << i;
+
+ INIT_LIST_HEAD(&atchan->active_list);
+ INIT_LIST_HEAD(&atchan->queue);
+ INIT_LIST_HEAD(&atchan->free_list);
+
+ tasklet_init(&atchan->tasklet, atc_tasklet,
+ (unsigned long)atchan);
+ atc_enable_irq(atchan);
+ }
+
+ /* set base routines */
+ atdma->dma_common.device_alloc_chan_resources = atc_alloc_chan_resources;
+ atdma->dma_common.device_free_chan_resources = atc_free_chan_resources;
+ atdma->dma_common.device_is_tx_complete = atc_is_tx_complete;
+ atdma->dma_common.device_issue_pending = atc_issue_pending;
+ atdma->dma_common.dev = &pdev->dev;
+
+ /* set prep routines based on capability */
+ if (dma_has_cap(DMA_MEMCPY, atdma->dma_common.cap_mask))
+ atdma->dma_common.device_prep_dma_memcpy = atc_prep_dma_memcpy;
+
+ if (dma_has_cap(DMA_SLAVE, atdma->dma_common.cap_mask)) {
+ atdma->dma_common.device_prep_slave_sg = atc_prep_slave_sg;
+ atdma->dma_common.device_terminate_all = atc_terminate_all;
+ }
+
+ dma_writel(atdma, EN, AT_DMA_ENABLE);
+
+ dev_info(&pdev->dev, "Atmel AHB DMA Controller ( %s%s), %d channels\n",
+ dma_has_cap(DMA_MEMCPY, atdma->dma_common.cap_mask) ? "cpy " : "",
+ dma_has_cap(DMA_SLAVE, atdma->dma_common.cap_mask) ? "slave " : "",
+ atdma->dma_common.chancnt);
+
+ dma_async_device_register(&atdma->dma_common);
+
+ return 0;
+
+err_pool_create:
+ platform_set_drvdata(pdev, NULL);
+ free_irq(platform_get_irq(pdev, 0), atdma);
+err_irq:
+ clk_disable(atdma->clk);
+ clk_put(atdma->clk);
+err_clk:
+ iounmap(atdma->regs);
+ atdma->regs = NULL;
+err_release_r:
+ release_mem_region(io->start, size);
+err_kfree:
+ kfree(atdma);
+ return err;
+}
+
+static int __exit at_dma_remove(struct platform_device *pdev)
+{
+ struct at_dma *atdma = platform_get_drvdata(pdev);
+ struct dma_chan *chan, *_chan;
+ struct resource *io;
+
+ at_dma_off(atdma);
+ dma_async_device_unregister(&atdma->dma_common);
+
+ dma_pool_destroy(atdma->dma_desc_pool);
+ platform_set_drvdata(pdev, NULL);
+ free_irq(platform_get_irq(pdev, 0), atdma);
+
+ list_for_each_entry_safe(chan, _chan, &atdma->dma_common.channels,
+ device_node) {
+ struct at_dma_chan *atchan = to_at_dma_chan(chan);
+
+ /* Disable interrupts */
+ atc_disable_irq(atchan);
+ tasklet_disable(&atchan->tasklet);
+
+ tasklet_kill(&atchan->tasklet);
+ list_del(&chan->device_node);
+ }
+
+ clk_disable(atdma->clk);
+ clk_put(atdma->clk);
+
+ iounmap(atdma->regs);
+ atdma->regs = NULL;
+
+ io = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ release_mem_region(io->start, io->end - io->start + 1);
+
+ kfree(atdma);
+
+ return 0;
+}
+
+static void at_dma_shutdown(struct platform_device *pdev)
+{
+ struct at_dma *atdma = platform_get_drvdata(pdev);
+
+ at_dma_off(platform_get_drvdata(pdev));
+ clk_disable(atdma->clk);
+}
+
+static int at_dma_suspend_late(struct platform_device *pdev, pm_message_t mesg)
+{
+ struct at_dma *atdma = platform_get_drvdata(pdev);
+
+ at_dma_off(platform_get_drvdata(pdev));
+ clk_disable(atdma->clk);
+ return 0;
+}
+
+static int at_dma_resume_early(struct platform_device *pdev)
+{
+ struct at_dma *atdma = platform_get_drvdata(pdev);
+
+ clk_enable(atdma->clk);
+ dma_writel(atdma, EN, AT_DMA_ENABLE);
+ return 0;
+
+}
+
+static struct platform_driver at_dma_driver = {
+ .remove = __exit_p(at_dma_remove),
+ .shutdown = at_dma_shutdown,
+ .suspend_late = at_dma_suspend_late,
+ .resume_early = at_dma_resume_early,
+ .driver = {
+ .name = "at_hdmac",
+ },
+};
+
+static int __init at_dma_init(void)
+{
+ return platform_driver_probe(&at_dma_driver, at_dma_probe);
+}
+module_init(at_dma_init);
+
+static void __exit at_dma_exit(void)
+{
+ platform_driver_unregister(&at_dma_driver);
+}
+module_exit(at_dma_exit);
+
+MODULE_DESCRIPTION("Atmel AHB DMA Controller driver");
+MODULE_AUTHOR("Nicolas Ferre <nicolas.ferre@atmel.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:at_hdmac");
diff --git a/drivers/dma/at_hdmac_regs.h b/drivers/dma/at_hdmac_regs.h
new file mode 100644
index 00000000000..4c972afc49e
--- /dev/null
+++ b/drivers/dma/at_hdmac_regs.h
@@ -0,0 +1,353 @@
+/*
+ * Header file for the Atmel AHB DMA Controller driver
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef AT_HDMAC_REGS_H
+#define AT_HDMAC_REGS_H
+
+#include <mach/at_hdmac.h>
+
+#define AT_DMA_MAX_NR_CHANNELS 8
+
+
+#define AT_DMA_GCFG 0x00 /* Global Configuration Register */
+#define AT_DMA_IF_BIGEND(i) (0x1 << (i)) /* AHB-Lite Interface i in Big-endian mode */
+#define AT_DMA_ARB_CFG (0x1 << 4) /* Arbiter mode. */
+#define AT_DMA_ARB_CFG_FIXED (0x0 << 4)
+#define AT_DMA_ARB_CFG_ROUND_ROBIN (0x1 << 4)
+
+#define AT_DMA_EN 0x04 /* Controller Enable Register */
+#define AT_DMA_ENABLE (0x1 << 0)
+
+#define AT_DMA_SREQ 0x08 /* Software Single Request Register */
+#define AT_DMA_SSREQ(x) (0x1 << ((x) << 1)) /* Request a source single transfer on channel x */
+#define AT_DMA_DSREQ(x) (0x1 << (1 + ((x) << 1))) /* Request a destination single transfer on channel x */
+
+#define AT_DMA_CREQ 0x0C /* Software Chunk Transfer Request Register */
+#define AT_DMA_SCREQ(x) (0x1 << ((x) << 1)) /* Request a source chunk transfer on channel x */
+#define AT_DMA_DCREQ(x) (0x1 << (1 + ((x) << 1))) /* Request a destination chunk transfer on channel x */
+
+#define AT_DMA_LAST 0x10 /* Software Last Transfer Flag Register */
+#define AT_DMA_SLAST(x) (0x1 << ((x) << 1)) /* This src rq is last tx of buffer on channel x */
+#define AT_DMA_DLAST(x) (0x1 << (1 + ((x) << 1))) /* This dst rq is last tx of buffer on channel x */
+
+#define AT_DMA_SYNC 0x14 /* Request Synchronization Register */
+#define AT_DMA_SYR(h) (0x1 << (h)) /* Synchronize handshake line h */
+
+/* Error, Chained Buffer transfer completed and Buffer transfer completed Interrupt registers */
+#define AT_DMA_EBCIER 0x18 /* Enable register */
+#define AT_DMA_EBCIDR 0x1C /* Disable register */
+#define AT_DMA_EBCIMR 0x20 /* Mask Register */
+#define AT_DMA_EBCISR 0x24 /* Status Register */
+#define AT_DMA_CBTC_OFFSET 8
+#define AT_DMA_ERR_OFFSET 16
+#define AT_DMA_BTC(x) (0x1 << (x))
+#define AT_DMA_CBTC(x) (0x1 << (AT_DMA_CBTC_OFFSET + (x)))
+#define AT_DMA_ERR(x) (0x1 << (AT_DMA_ERR_OFFSET + (x)))
+
+#define AT_DMA_CHER 0x28 /* Channel Handler Enable Register */
+#define AT_DMA_ENA(x) (0x1 << (x))
+#define AT_DMA_SUSP(x) (0x1 << ( 8 + (x)))
+#define AT_DMA_KEEP(x) (0x1 << (24 + (x)))
+
+#define AT_DMA_CHDR 0x2C /* Channel Handler Disable Register */
+#define AT_DMA_DIS(x) (0x1 << (x))
+#define AT_DMA_RES(x) (0x1 << ( 8 + (x)))
+
+#define AT_DMA_CHSR 0x30 /* Channel Handler Status Register */
+#define AT_DMA_EMPT(x) (0x1 << (16 + (x)))
+#define AT_DMA_STAL(x) (0x1 << (24 + (x)))
+
+
+#define AT_DMA_CH_REGS_BASE 0x3C /* Channel registers base address */
+#define ch_regs(x) (AT_DMA_CH_REGS_BASE + (x) * 0x28) /* Channel x base addr */
+
+/* Hardware register offset for each channel */
+#define ATC_SADDR_OFFSET 0x00 /* Source Address Register */
+#define ATC_DADDR_OFFSET 0x04 /* Destination Address Register */
+#define ATC_DSCR_OFFSET 0x08 /* Descriptor Address Register */
+#define ATC_CTRLA_OFFSET 0x0C /* Control A Register */
+#define ATC_CTRLB_OFFSET 0x10 /* Control B Register */
+#define ATC_CFG_OFFSET 0x14 /* Configuration Register */
+#define ATC_SPIP_OFFSET 0x18 /* Src PIP Configuration Register */
+#define ATC_DPIP_OFFSET 0x1C /* Dst PIP Configuration Register */
+
+
+/* Bitfield definitions */
+
+/* Bitfields in DSCR */
+#define ATC_DSCR_IF(i) (0x3 & (i)) /* Dsc feched via AHB-Lite Interface i */
+
+/* Bitfields in CTRLA */
+#define ATC_BTSIZE_MAX 0xFFFFUL /* Maximum Buffer Transfer Size */
+#define ATC_BTSIZE(x) (ATC_BTSIZE_MAX & (x)) /* Buffer Transfer Size */
+/* Chunck Tranfer size definitions are in at_hdmac.h */
+#define ATC_SRC_WIDTH_MASK (0x3 << 24) /* Source Single Transfer Size */
+#define ATC_SRC_WIDTH(x) ((x) << 24)
+#define ATC_SRC_WIDTH_BYTE (0x0 << 24)
+#define ATC_SRC_WIDTH_HALFWORD (0x1 << 24)
+#define ATC_SRC_WIDTH_WORD (0x2 << 24)
+#define ATC_DST_WIDTH_MASK (0x3 << 28) /* Destination Single Transfer Size */
+#define ATC_DST_WIDTH(x) ((x) << 28)
+#define ATC_DST_WIDTH_BYTE (0x0 << 28)
+#define ATC_DST_WIDTH_HALFWORD (0x1 << 28)
+#define ATC_DST_WIDTH_WORD (0x2 << 28)
+#define ATC_DONE (0x1 << 31) /* Tx Done (only written back in descriptor) */
+
+/* Bitfields in CTRLB */
+#define ATC_SIF(i) (0x3 & (i)) /* Src tx done via AHB-Lite Interface i */
+#define ATC_DIF(i) ((0x3 & (i)) << 4) /* Dst tx done via AHB-Lite Interface i */
+#define ATC_SRC_PIP (0x1 << 8) /* Source Picture-in-Picture enabled */
+#define ATC_DST_PIP (0x1 << 12) /* Destination Picture-in-Picture enabled */
+#define ATC_SRC_DSCR_DIS (0x1 << 16) /* Src Descriptor fetch disable */
+#define ATC_DST_DSCR_DIS (0x1 << 20) /* Dst Descriptor fetch disable */
+#define ATC_FC_MASK (0x7 << 21) /* Choose Flow Controller */
+#define ATC_FC_MEM2MEM (0x0 << 21) /* Mem-to-Mem (DMA) */
+#define ATC_FC_MEM2PER (0x1 << 21) /* Mem-to-Periph (DMA) */
+#define ATC_FC_PER2MEM (0x2 << 21) /* Periph-to-Mem (DMA) */
+#define ATC_FC_PER2PER (0x3 << 21) /* Periph-to-Periph (DMA) */
+#define ATC_FC_PER2MEM_PER (0x4 << 21) /* Periph-to-Mem (Peripheral) */
+#define ATC_FC_MEM2PER_PER (0x5 << 21) /* Mem-to-Periph (Peripheral) */
+#define ATC_FC_PER2PER_SRCPER (0x6 << 21) /* Periph-to-Periph (Src Peripheral) */
+#define ATC_FC_PER2PER_DSTPER (0x7 << 21) /* Periph-to-Periph (Dst Peripheral) */
+#define ATC_SRC_ADDR_MODE_MASK (0x3 << 24)
+#define ATC_SRC_ADDR_MODE_INCR (0x0 << 24) /* Incrementing Mode */
+#define ATC_SRC_ADDR_MODE_DECR (0x1 << 24) /* Decrementing Mode */
+#define ATC_SRC_ADDR_MODE_FIXED (0x2 << 24) /* Fixed Mode */
+#define ATC_DST_ADDR_MODE_MASK (0x3 << 28)
+#define ATC_DST_ADDR_MODE_INCR (0x0 << 28) /* Incrementing Mode */
+#define ATC_DST_ADDR_MODE_DECR (0x1 << 28) /* Decrementing Mode */
+#define ATC_DST_ADDR_MODE_FIXED (0x2 << 28) /* Fixed Mode */
+#define ATC_IEN (0x1 << 30) /* BTC interrupt enable (active low) */
+#define ATC_AUTO (0x1 << 31) /* Auto multiple buffer tx enable */
+
+/* Bitfields in CFG */
+/* are in at_hdmac.h */
+
+/* Bitfields in SPIP */
+#define ATC_SPIP_HOLE(x) (0xFFFFU & (x))
+#define ATC_SPIP_BOUNDARY(x) ((0x3FF & (x)) << 16)
+
+/* Bitfields in DPIP */
+#define ATC_DPIP_HOLE(x) (0xFFFFU & (x))
+#define ATC_DPIP_BOUNDARY(x) ((0x3FF & (x)) << 16)
+
+
+/*-- descriptors -----------------------------------------------------*/
+
+/* LLI == Linked List Item; aka DMA buffer descriptor */
+struct at_lli {
+ /* values that are not changed by hardware */
+ dma_addr_t saddr;
+ dma_addr_t daddr;
+ /* value that may get written back: */
+ u32 ctrla;
+ /* more values that are not changed by hardware */
+ u32 ctrlb;
+ dma_addr_t dscr; /* chain to next lli */
+};
+
+/**
+ * struct at_desc - software descriptor
+ * @at_lli: hardware lli structure
+ * @txd: support for the async_tx api
+ * @desc_node: node on the channed descriptors list
+ * @len: total transaction bytecount
+ */
+struct at_desc {
+ /* FIRST values the hardware uses */
+ struct at_lli lli;
+
+ /* THEN values for driver housekeeping */
+ struct dma_async_tx_descriptor txd;
+ struct list_head desc_node;
+ size_t len;
+};
+
+static inline struct at_desc *
+txd_to_at_desc(struct dma_async_tx_descriptor *txd)
+{
+ return container_of(txd, struct at_desc, txd);
+}
+
+
+/*-- Channels --------------------------------------------------------*/
+
+/**
+ * struct at_dma_chan - internal representation of an Atmel HDMAC channel
+ * @chan_common: common dmaengine channel object members
+ * @device: parent device
+ * @ch_regs: memory mapped register base
+ * @mask: channel index in a mask
+ * @error_status: transmit error status information from irq handler
+ * to tasklet (use atomic operations)
+ * @tasklet: bottom half to finish transaction work
+ * @lock: serializes enqueue/dequeue operations to descriptors lists
+ * @completed_cookie: identifier for the most recently completed operation
+ * @active_list: list of descriptors dmaengine is being running on
+ * @queue: list of descriptors ready to be submitted to engine
+ * @free_list: list of descriptors usable by the channel
+ * @descs_allocated: records the actual size of the descriptor pool
+ */
+struct at_dma_chan {
+ struct dma_chan chan_common;
+ struct at_dma *device;
+ void __iomem *ch_regs;
+ u8 mask;
+ unsigned long error_status;
+ struct tasklet_struct tasklet;
+
+ spinlock_t lock;
+
+ /* these other elements are all protected by lock */
+ dma_cookie_t completed_cookie;
+ struct list_head active_list;
+ struct list_head queue;
+ struct list_head free_list;
+ unsigned int descs_allocated;
+};
+
+#define channel_readl(atchan, name) \
+ __raw_readl((atchan)->ch_regs + ATC_##name##_OFFSET)
+
+#define channel_writel(atchan, name, val) \
+ __raw_writel((val), (atchan)->ch_regs + ATC_##name##_OFFSET)
+
+static inline struct at_dma_chan *to_at_dma_chan(struct dma_chan *dchan)
+{
+ return container_of(dchan, struct at_dma_chan, chan_common);
+}
+
+
+/*-- Controller ------------------------------------------------------*/
+
+/**
+ * struct at_dma - internal representation of an Atmel HDMA Controller
+ * @chan_common: common dmaengine dma_device object members
+ * @ch_regs: memory mapped register base
+ * @clk: dma controller clock
+ * @all_chan_mask: all channels availlable in a mask
+ * @dma_desc_pool: base of DMA descriptor region (DMA address)
+ * @chan: channels table to store at_dma_chan structures
+ */
+struct at_dma {
+ struct dma_device dma_common;
+ void __iomem *regs;
+ struct clk *clk;
+
+ u8 all_chan_mask;
+
+ struct dma_pool *dma_desc_pool;
+ /* AT THE END channels table */
+ struct at_dma_chan chan[0];
+};
+
+#define dma_readl(atdma, name) \
+ __raw_readl((atdma)->regs + AT_DMA_##name)
+#define dma_writel(atdma, name, val) \
+ __raw_writel((val), (atdma)->regs + AT_DMA_##name)
+
+static inline struct at_dma *to_at_dma(struct dma_device *ddev)
+{
+ return container_of(ddev, struct at_dma, dma_common);
+}
+
+
+/*-- Helper functions ------------------------------------------------*/
+
+static struct device *chan2dev(struct dma_chan *chan)
+{
+ return &chan->dev->device;
+}
+static struct device *chan2parent(struct dma_chan *chan)
+{
+ return chan->dev->device.parent;
+}
+
+#if defined(VERBOSE_DEBUG)
+static void vdbg_dump_regs(struct at_dma_chan *atchan)
+{
+ struct at_dma *atdma = to_at_dma(atchan->chan_common.device);
+
+ dev_err(chan2dev(&atchan->chan_common),
+ " channel %d : imr = 0x%x, chsr = 0x%x\n",
+ atchan->chan_common.chan_id,
+ dma_readl(atdma, EBCIMR),
+ dma_readl(atdma, CHSR));
+
+ dev_err(chan2dev(&atchan->chan_common),
+ " channel: s0x%x d0x%x ctrl0x%x:0x%x cfg0x%x l0x%x\n",
+ channel_readl(atchan, SADDR),
+ channel_readl(atchan, DADDR),
+ channel_readl(atchan, CTRLA),
+ channel_readl(atchan, CTRLB),
+ channel_readl(atchan, CFG),
+ channel_readl(atchan, DSCR));
+}
+#else
+static void vdbg_dump_regs(struct at_dma_chan *atchan) {}
+#endif
+
+static void atc_dump_lli(struct at_dma_chan *atchan, struct at_lli *lli)
+{
+ dev_printk(KERN_CRIT, chan2dev(&atchan->chan_common),
+ " desc: s0x%x d0x%x ctrl0x%x:0x%x l0x%x\n",
+ lli->saddr, lli->daddr,
+ lli->ctrla, lli->ctrlb, lli->dscr);
+}
+
+
+static void atc_setup_irq(struct at_dma_chan *atchan, int on)
+{
+ struct at_dma *atdma = to_at_dma(atchan->chan_common.device);
+ u32 ebci;
+
+ /* enable interrupts on buffer chain completion & error */
+ ebci = AT_DMA_CBTC(atchan->chan_common.chan_id)
+ | AT_DMA_ERR(atchan->chan_common.chan_id);
+ if (on)
+ dma_writel(atdma, EBCIER, ebci);
+ else
+ dma_writel(atdma, EBCIDR, ebci);
+}
+
+static inline void atc_enable_irq(struct at_dma_chan *atchan)
+{
+ atc_setup_irq(atchan, 1);
+}
+
+static inline void atc_disable_irq(struct at_dma_chan *atchan)
+{
+ atc_setup_irq(atchan, 0);
+}
+
+
+/**
+ * atc_chan_is_enabled - test if given channel is enabled
+ * @atchan: channel we want to test status
+ */
+static inline int atc_chan_is_enabled(struct at_dma_chan *atchan)
+{
+ struct at_dma *atdma = to_at_dma(atchan->chan_common.device);
+
+ return !!(dma_readl(atdma, CHSR) & atchan->mask);
+}
+
+
+/**
+ * set_desc_eol - set end-of-link to descriptor so it will end transfer
+ * @desc: descriptor, signle or at the end of a chain, to end chain on
+ */
+static void set_desc_eol(struct at_desc *desc)
+{
+ desc->lli.ctrlb |= ATC_SRC_DSCR_DIS | ATC_DST_DSCR_DIS;
+ desc->lli.dscr = 0;
+}
+
+#endif /* AT_HDMAC_REGS_H */
diff --git a/drivers/dma/dmatest.c b/drivers/dma/dmatest.c
index fb7da5141e9..d93017fc787 100644
--- a/drivers/dma/dmatest.c
+++ b/drivers/dma/dmatest.c
@@ -38,6 +38,11 @@ module_param(max_channels, uint, S_IRUGO);
MODULE_PARM_DESC(max_channels,
"Maximum number of channels to use (default: all)");
+static unsigned int iterations;
+module_param(iterations, uint, S_IRUGO);
+MODULE_PARM_DESC(iterations,
+ "Iterations before stopping test (default: infinite)");
+
static unsigned int xor_sources = 3;
module_param(xor_sources, uint, S_IRUGO);
MODULE_PARM_DESC(xor_sources,
@@ -114,7 +119,7 @@ static void dmatest_init_srcs(u8 **bufs, unsigned int start, unsigned int len)
buf[i] = PATTERN_SRC | (~i & PATTERN_COUNT_MASK);
for ( ; i < start + len; i++)
buf[i] = PATTERN_SRC | PATTERN_COPY
- | (~i & PATTERN_COUNT_MASK);;
+ | (~i & PATTERN_COUNT_MASK);
for ( ; i < test_buf_size; i++)
buf[i] = PATTERN_SRC | (~i & PATTERN_COUNT_MASK);
buf++;
@@ -270,7 +275,8 @@ static int dmatest_func(void *data)
flags = DMA_CTRL_ACK | DMA_COMPL_SKIP_DEST_UNMAP | DMA_PREP_INTERRUPT;
- while (!kthread_should_stop()) {
+ while (!kthread_should_stop()
+ && !(iterations && total_tests >= iterations)) {
struct dma_device *dev = chan->device;
struct dma_async_tx_descriptor *tx = NULL;
dma_addr_t dma_srcs[src_cnt];
@@ -416,6 +422,13 @@ err_srcbuf:
err_srcs:
pr_notice("%s: terminating after %u tests, %u failures (status %d)\n",
thread_name, total_tests, failed_tests, ret);
+
+ if (iterations > 0)
+ while (!kthread_should_stop()) {
+ DECLARE_WAIT_QUEUE_HEAD(wait_dmatest_exit);
+ interruptible_sleep_on(&wait_dmatest_exit);
+ }
+
return ret;
}
@@ -495,11 +508,11 @@ static int dmatest_add_channel(struct dma_chan *chan)
if (dma_has_cap(DMA_MEMCPY, dma_dev->cap_mask)) {
cnt = dmatest_add_threads(dtc, DMA_MEMCPY);
- thread_count += cnt > 0 ?: 0;
+ thread_count += cnt > 0 ? cnt : 0;
}
if (dma_has_cap(DMA_XOR, dma_dev->cap_mask)) {
cnt = dmatest_add_threads(dtc, DMA_XOR);
- thread_count += cnt > 0 ?: 0;
+ thread_count += cnt > 0 ? cnt : 0;
}
pr_info("dmatest: Started %u threads using %s\n",
diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c
index f18d1bde043..ef87a898414 100644
--- a/drivers/dma/fsldma.c
+++ b/drivers/dma/fsldma.c
@@ -12,6 +12,11 @@
* also fit for MPC8560, MPC8555, MPC8548, MPC8641, and etc.
* The support for MPC8349 DMA contorller is also added.
*
+ * This driver instructs the DMA controller to issue the PCI Read Multiple
+ * command for PCI read operations, instead of using the default PCI Read Line
+ * command. Please be aware that this setting may result in read pre-fetching
+ * on some platforms.
+ *
* This is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
@@ -49,9 +54,10 @@ static void dma_init(struct fsl_dma_chan *fsl_chan)
case FSL_DMA_IP_83XX:
/* Set the channel to below modes:
* EOTIE - End-of-transfer interrupt enable
+ * PRC_RM - PCI read multiple
*/
- DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr, FSL_DMA_MR_EOTIE,
- 32);
+ DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr, FSL_DMA_MR_EOTIE
+ | FSL_DMA_MR_PRC_RM, 32);
break;
}
@@ -136,15 +142,16 @@ static int dma_is_idle(struct fsl_dma_chan *fsl_chan)
static void dma_start(struct fsl_dma_chan *fsl_chan)
{
- u32 mr_set = 0;;
+ u32 mr_set = 0;
if (fsl_chan->feature & FSL_DMA_CHAN_PAUSE_EXT) {
DMA_OUT(fsl_chan, &fsl_chan->reg_base->bcr, 0, 32);
mr_set |= FSL_DMA_MR_EMP_EN;
- } else
+ } else if ((fsl_chan->feature & FSL_DMA_IP_MASK) == FSL_DMA_IP_85XX) {
DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr,
DMA_IN(fsl_chan, &fsl_chan->reg_base->mr, 32)
& ~FSL_DMA_MR_EMP_EN, 32);
+ }
if (fsl_chan->feature & FSL_DMA_CHAN_START_EXT)
mr_set |= FSL_DMA_MR_EMS_EN;
@@ -871,9 +878,9 @@ static int __devinit fsl_dma_chan_probe(struct fsl_dma_device *fdev,
switch (new_fsl_chan->feature & FSL_DMA_IP_MASK) {
case FSL_DMA_IP_85XX:
- new_fsl_chan->toggle_ext_start = fsl_chan_toggle_ext_start;
new_fsl_chan->toggle_ext_pause = fsl_chan_toggle_ext_pause;
case FSL_DMA_IP_83XX:
+ new_fsl_chan->toggle_ext_start = fsl_chan_toggle_ext_start;
new_fsl_chan->set_src_loop_size = fsl_chan_set_src_loop_size;
new_fsl_chan->set_dest_loop_size = fsl_chan_set_dest_loop_size;
}
diff --git a/drivers/dma/fsldma.h b/drivers/dma/fsldma.h
index 4f21a512d84..dc7f2686579 100644
--- a/drivers/dma/fsldma.h
+++ b/drivers/dma/fsldma.h
@@ -38,6 +38,7 @@
/* Special MR definition for MPC8349 */
#define FSL_DMA_MR_EOTIE 0x00000080
+#define FSL_DMA_MR_PRC_RM 0x00000800
#define FSL_DMA_SR_CH 0x00000020
#define FSL_DMA_SR_PE 0x00000010
diff --git a/drivers/dma/mv_xor.c b/drivers/dma/mv_xor.c
index ddab94f5122..3f23eabe09f 100644
--- a/drivers/dma/mv_xor.c
+++ b/drivers/dma/mv_xor.c
@@ -1176,7 +1176,7 @@ static int __devinit mv_xor_probe(struct platform_device *pdev)
if (dma_has_cap(DMA_MEMSET, dma_dev->cap_mask))
dma_dev->device_prep_dma_memset = mv_xor_prep_dma_memset;
if (dma_has_cap(DMA_XOR, dma_dev->cap_mask)) {
- dma_dev->max_xor = 8; ;
+ dma_dev->max_xor = 8;
dma_dev->device_prep_dma_xor = mv_xor_prep_dma_xor;
}
diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index 24964c1d0af..e2a10bcba7a 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -868,6 +868,8 @@ static void amd64_read_dbam_reg(struct amd64_pvt *pvt)
goto err_reg;
}
+ return;
+
err_reg:
debugf0("Error reading F2x%03x.\n", reg);
}
@@ -2634,6 +2636,8 @@ static void amd64_read_mc_registers(struct amd64_pvt *pvt)
amd64_dump_misc_regs(pvt);
+ return;
+
err_reg:
debugf0("Reading an MC register failed\n");
@@ -2977,6 +2981,9 @@ static int amd64_check_ecc_enabled(struct amd64_pvt *pvt)
"ECC is enabled by BIOS, Proceeding "
"with EDAC module initialization\n");
+ /* Signal good ECC status */
+ ret = 0;
+
/* CLEAR the override, since BIOS controlled it */
ecc_enable_override = 0;
}
diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
index 8fab7890a36..33be210d672 100644
--- a/drivers/gpu/drm/drm_crtc.c
+++ b/drivers/gpu/drm/drm_crtc.c
@@ -1461,7 +1461,7 @@ int drm_mode_setcrtc(struct drm_device *dev, void *data,
goto out;
}
- if (crtc_req->count_connectors > 0 && !mode && !fb) {
+ if (crtc_req->count_connectors > 0 && (!mode || !fb)) {
DRM_DEBUG("Count connectors is %d but no mode or fb set\n",
crtc_req->count_connectors);
ret = -EINVAL;
diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c
index 3da9cfa3184..6aaa2cb2336 100644
--- a/drivers/gpu/drm/drm_crtc_helper.c
+++ b/drivers/gpu/drm/drm_crtc_helper.c
@@ -706,8 +706,8 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set)
struct drm_encoder **save_encoders, *new_encoder;
struct drm_framebuffer *old_fb = NULL;
bool save_enabled;
- bool mode_changed = false;
- bool fb_changed = false;
+ bool mode_changed = false; /* if true do a full mode set */
+ bool fb_changed = false; /* if true and !mode_changed just do a flip */
struct drm_connector *connector;
int count = 0, ro, fail = 0;
struct drm_crtc_helper_funcs *crtc_funcs;
@@ -758,6 +758,8 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set)
if (set->crtc->fb == NULL) {
DRM_DEBUG("crtc has no fb, full mode set\n");
mode_changed = true;
+ } else if (set->fb == NULL) {
+ mode_changed = true;
} else if ((set->fb->bits_per_pixel !=
set->crtc->fb->bits_per_pixel) ||
set->fb->depth != set->crtc->fb->depth)
diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c
index b4a3dbcebe9..f85aaf21e78 100644
--- a/drivers/gpu/drm/drm_irq.c
+++ b/drivers/gpu/drm/drm_irq.c
@@ -566,7 +566,7 @@ int drm_wait_vblank(struct drm_device *dev, void *data,
ret = drm_vblank_get(dev, crtc);
if (ret) {
- DRM_ERROR("failed to acquire vblank counter, %d\n", ret);
+ DRM_DEBUG("failed to acquire vblank counter, %d\n", ret);
return ret;
}
seq = drm_vblank_count(dev, crtc);
diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index 54f492a488a..7914097b09c 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -566,6 +566,8 @@ void drm_mode_connector_list_update(struct drm_connector *connector)
found_it = 1;
/* if equal delete the probed mode */
mode->status = pmode->status;
+ /* Merge type bits together */
+ mode->type |= pmode->type;
list_del(&pmode->head);
drm_mode_destroy(connector->dev, pmode);
break;
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 8c4783180bf..50d1f782768 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -1186,6 +1186,13 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
if (ret)
goto out_iomapfree;
+ dev_priv->wq = create_workqueue("i915");
+ if (dev_priv->wq == NULL) {
+ DRM_ERROR("Failed to create our workqueue.\n");
+ ret = -ENOMEM;
+ goto out_iomapfree;
+ }
+
/* enable GEM by default */
dev_priv->has_gem = 1;
@@ -1211,7 +1218,7 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
if (!I915_NEED_GFX_HWS(dev)) {
ret = i915_init_phys_hws(dev);
if (ret != 0)
- goto out_iomapfree;
+ goto out_workqueue_free;
}
i915_get_mem_freq(dev);
@@ -1245,7 +1252,7 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
ret = i915_load_modeset_init(dev, prealloc_size, agp_size);
if (ret < 0) {
DRM_ERROR("failed to init modeset\n");
- goto out_rmmap;
+ goto out_workqueue_free;
}
}
@@ -1256,6 +1263,8 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
return 0;
+out_workqueue_free:
+ destroy_workqueue(dev_priv->wq);
out_iomapfree:
io_mapping_free(dev_priv->mm.gtt_mapping);
out_rmmap:
@@ -1269,6 +1278,8 @@ int i915_driver_unload(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
+ destroy_workqueue(dev_priv->wq);
+
io_mapping_free(dev_priv->mm.gtt_mapping);
if (dev_priv->mm.gtt_mtrr >= 0) {
mtrr_del(dev_priv->mm.gtt_mtrr, dev->agp->base,
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index d0875287588..7537f57d8a8 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -219,6 +219,7 @@ typedef struct drm_i915_private {
unsigned int lvds_vbt:1;
unsigned int int_crt_support:1;
unsigned int lvds_use_ssc:1;
+ unsigned int edp_support:1;
int lvds_ssc_freq;
struct drm_i915_fence_reg fence_regs[16]; /* assume 965 */
@@ -229,6 +230,8 @@ typedef struct drm_i915_private {
spinlock_t error_lock;
struct drm_i915_error_state *first_error;
+ struct work_struct error_work;
+ struct workqueue_struct *wq;
/* Register state */
u8 saveLBB;
@@ -888,6 +891,7 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller);
IS_I915GM(dev)))
#define SUPPORTS_INTEGRATED_HDMI(dev) (IS_G4X(dev) || IS_IGDNG(dev))
#define SUPPORTS_INTEGRATED_DP(dev) (IS_G4X(dev) || IS_IGDNG(dev))
+#define SUPPORTS_EDP(dev) (IS_IGDNG_M(dev))
#define I915_HAS_HOTPLUG(dev) (IS_I945G(dev) || IS_I945GM(dev) || IS_I965G(dev))
/* dsparb controlled by hw only */
#define DSPARB_HWCONTROL(dev) (IS_G4X(dev) || IS_IGDNG(dev))
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 5bf420378b6..140bee142fc 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -1570,7 +1570,7 @@ i915_add_request(struct drm_device *dev, struct drm_file *file_priv,
}
if (was_empty && !dev_priv->mm.suspended)
- schedule_delayed_work(&dev_priv->mm.retire_work, HZ);
+ queue_delayed_work(dev_priv->wq, &dev_priv->mm.retire_work, HZ);
return seqno;
}
@@ -1719,7 +1719,7 @@ i915_gem_retire_work_handler(struct work_struct *work)
i915_gem_retire_requests(dev);
if (!dev_priv->mm.suspended &&
!list_empty(&dev_priv->mm.request_list))
- schedule_delayed_work(&dev_priv->mm.retire_work, HZ);
+ queue_delayed_work(dev_priv->wq, &dev_priv->mm.retire_work, HZ);
mutex_unlock(&dev->struct_mutex);
}
diff --git a/drivers/gpu/drm/i915/i915_gem_debugfs.c b/drivers/gpu/drm/i915/i915_gem_debugfs.c
index 9a44bfcb813..cb3b97405fb 100644
--- a/drivers/gpu/drm/i915/i915_gem_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_gem_debugfs.c
@@ -343,6 +343,8 @@ static int i915_error_state(struct seq_file *m, void *unused)
error = dev_priv->first_error;
+ seq_printf(m, "Time: %ld s %ld us\n", error->time.tv_sec,
+ error->time.tv_usec);
seq_printf(m, "EIR: 0x%08x\n", error->eir);
seq_printf(m, " PGTBL_ER: 0x%08x\n", error->pgtbl_er);
seq_printf(m, " INSTPM: 0x%08x\n", error->instpm);
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 7ba23a69a0c..7ebc84c2881 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -190,7 +190,7 @@ u32 i915_get_vblank_counter(struct drm_device *dev, int pipe)
low_frame = pipe ? PIPEBFRAMEPIXEL : PIPEAFRAMEPIXEL;
if (!i915_pipe_enabled(dev, pipe)) {
- DRM_ERROR("trying to get vblank count for disabled pipe %d\n", pipe);
+ DRM_DEBUG("trying to get vblank count for disabled pipe %d\n", pipe);
return 0;
}
@@ -219,7 +219,7 @@ u32 gm45_get_vblank_counter(struct drm_device *dev, int pipe)
int reg = pipe ? PIPEB_FRMCOUNT_GM45 : PIPEA_FRMCOUNT_GM45;
if (!i915_pipe_enabled(dev, pipe)) {
- DRM_ERROR("trying to get vblank count for disabled pipe %d\n", pipe);
+ DRM_DEBUG("trying to get vblank count for disabled pipe %d\n", pipe);
return 0;
}
@@ -290,6 +290,35 @@ irqreturn_t igdng_irq_handler(struct drm_device *dev)
return ret;
}
+/**
+ * i915_error_work_func - do process context error handling work
+ * @work: work struct
+ *
+ * Fire an error uevent so userspace can see that a hang or error
+ * was detected.
+ */
+static void i915_error_work_func(struct work_struct *work)
+{
+ drm_i915_private_t *dev_priv = container_of(work, drm_i915_private_t,
+ error_work);
+ struct drm_device *dev = dev_priv->dev;
+ char *event_string = "ERROR=1";
+ char *envp[] = { event_string, NULL };
+
+ DRM_DEBUG("generating error event\n");
+
+ kobject_uevent_env(&dev->primary->kdev.kobj, KOBJ_CHANGE, envp);
+}
+
+/**
+ * i915_capture_error_state - capture an error record for later analysis
+ * @dev: drm device
+ *
+ * Should be called when an error is detected (either a hang or an error
+ * interrupt) to capture error state from the time of the error. Fills
+ * out a structure which becomes available in debugfs for user level tools
+ * to pick up.
+ */
static void i915_capture_error_state(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
@@ -325,12 +354,137 @@ static void i915_capture_error_state(struct drm_device *dev)
error->acthd = I915_READ(ACTHD_I965);
}
+ do_gettimeofday(&error->time);
+
dev_priv->first_error = error;
out:
spin_unlock_irqrestore(&dev_priv->error_lock, flags);
}
+/**
+ * i915_handle_error - handle an error interrupt
+ * @dev: drm device
+ *
+ * Do some basic checking of regsiter state at error interrupt time and
+ * dump it to the syslog. Also call i915_capture_error_state() to make
+ * sure we get a record and make it available in debugfs. Fire a uevent
+ * so userspace knows something bad happened (should trigger collection
+ * of a ring dump etc.).
+ */
+static void i915_handle_error(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ u32 eir = I915_READ(EIR);
+ u32 pipea_stats = I915_READ(PIPEASTAT);
+ u32 pipeb_stats = I915_READ(PIPEBSTAT);
+
+ i915_capture_error_state(dev);
+
+ printk(KERN_ERR "render error detected, EIR: 0x%08x\n",
+ eir);
+
+ if (IS_G4X(dev)) {
+ if (eir & (GM45_ERROR_MEM_PRIV | GM45_ERROR_CP_PRIV)) {
+ u32 ipeir = I915_READ(IPEIR_I965);
+
+ printk(KERN_ERR " IPEIR: 0x%08x\n",
+ I915_READ(IPEIR_I965));
+ printk(KERN_ERR " IPEHR: 0x%08x\n",
+ I915_READ(IPEHR_I965));
+ printk(KERN_ERR " INSTDONE: 0x%08x\n",
+ I915_READ(INSTDONE_I965));
+ printk(KERN_ERR " INSTPS: 0x%08x\n",
+ I915_READ(INSTPS));
+ printk(KERN_ERR " INSTDONE1: 0x%08x\n",
+ I915_READ(INSTDONE1));
+ printk(KERN_ERR " ACTHD: 0x%08x\n",
+ I915_READ(ACTHD_I965));
+ I915_WRITE(IPEIR_I965, ipeir);
+ (void)I915_READ(IPEIR_I965);
+ }
+ if (eir & GM45_ERROR_PAGE_TABLE) {
+ u32 pgtbl_err = I915_READ(PGTBL_ER);
+ printk(KERN_ERR "page table error\n");
+ printk(KERN_ERR " PGTBL_ER: 0x%08x\n",
+ pgtbl_err);
+ I915_WRITE(PGTBL_ER, pgtbl_err);
+ (void)I915_READ(PGTBL_ER);
+ }
+ }
+
+ if (IS_I9XX(dev)) {
+ if (eir & I915_ERROR_PAGE_TABLE) {
+ u32 pgtbl_err = I915_READ(PGTBL_ER);
+ printk(KERN_ERR "page table error\n");
+ printk(KERN_ERR " PGTBL_ER: 0x%08x\n",
+ pgtbl_err);
+ I915_WRITE(PGTBL_ER, pgtbl_err);
+ (void)I915_READ(PGTBL_ER);
+ }
+ }
+
+ if (eir & I915_ERROR_MEMORY_REFRESH) {
+ printk(KERN_ERR "memory refresh error\n");
+ printk(KERN_ERR "PIPEASTAT: 0x%08x\n",
+ pipea_stats);
+ printk(KERN_ERR "PIPEBSTAT: 0x%08x\n",
+ pipeb_stats);
+ /* pipestat has already been acked */
+ }
+ if (eir & I915_ERROR_INSTRUCTION) {
+ printk(KERN_ERR "instruction error\n");
+ printk(KERN_ERR " INSTPM: 0x%08x\n",
+ I915_READ(INSTPM));
+ if (!IS_I965G(dev)) {
+ u32 ipeir = I915_READ(IPEIR);
+
+ printk(KERN_ERR " IPEIR: 0x%08x\n",
+ I915_READ(IPEIR));
+ printk(KERN_ERR " IPEHR: 0x%08x\n",
+ I915_READ(IPEHR));
+ printk(KERN_ERR " INSTDONE: 0x%08x\n",
+ I915_READ(INSTDONE));
+ printk(KERN_ERR " ACTHD: 0x%08x\n",
+ I915_READ(ACTHD));
+ I915_WRITE(IPEIR, ipeir);
+ (void)I915_READ(IPEIR);
+ } else {
+ u32 ipeir = I915_READ(IPEIR_I965);
+
+ printk(KERN_ERR " IPEIR: 0x%08x\n",
+ I915_READ(IPEIR_I965));
+ printk(KERN_ERR " IPEHR: 0x%08x\n",
+ I915_READ(IPEHR_I965));
+ printk(KERN_ERR " INSTDONE: 0x%08x\n",
+ I915_READ(INSTDONE_I965));
+ printk(KERN_ERR " INSTPS: 0x%08x\n",
+ I915_READ(INSTPS));
+ printk(KERN_ERR " INSTDONE1: 0x%08x\n",
+ I915_READ(INSTDONE1));
+ printk(KERN_ERR " ACTHD: 0x%08x\n",
+ I915_READ(ACTHD_I965));
+ I915_WRITE(IPEIR_I965, ipeir);
+ (void)I915_READ(IPEIR_I965);
+ }
+ }
+
+ I915_WRITE(EIR, eir);
+ (void)I915_READ(EIR);
+ eir = I915_READ(EIR);
+ if (eir) {
+ /*
+ * some errors might have become stuck,
+ * mask them.
+ */
+ DRM_ERROR("EIR stuck: 0x%08x, masking\n", eir);
+ I915_WRITE(EMR, I915_READ(EMR) | eir);
+ I915_WRITE(IIR, I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT);
+ }
+
+ queue_work(dev_priv->wq, &dev_priv->error_work);
+}
+
irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS)
{
struct drm_device *dev = (struct drm_device *) arg;
@@ -372,6 +526,9 @@ irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS)
pipea_stats = I915_READ(PIPEASTAT);
pipeb_stats = I915_READ(PIPEBSTAT);
+ if (iir & I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT)
+ i915_handle_error(dev);
+
/*
* Clear the PIPE(A|B)STAT regs before the IIR
*/
@@ -403,86 +560,13 @@ irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS)
DRM_DEBUG("hotplug event received, stat 0x%08x\n",
hotplug_status);
if (hotplug_status & dev_priv->hotplug_supported_mask)
- schedule_work(&dev_priv->hotplug_work);
+ queue_work(dev_priv->wq,
+ &dev_priv->hotplug_work);
I915_WRITE(PORT_HOTPLUG_STAT, hotplug_status);
I915_READ(PORT_HOTPLUG_STAT);
}
- if (iir & I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT) {
- u32 eir = I915_READ(EIR);
-
- i915_capture_error_state(dev);
-
- printk(KERN_ERR "render error detected, EIR: 0x%08x\n",
- eir);
- if (eir & I915_ERROR_PAGE_TABLE) {
- u32 pgtbl_err = I915_READ(PGTBL_ER);
- printk(KERN_ERR "page table error\n");
- printk(KERN_ERR " PGTBL_ER: 0x%08x\n",
- pgtbl_err);
- I915_WRITE(PGTBL_ER, pgtbl_err);
- (void)I915_READ(PGTBL_ER);
- }
- if (eir & I915_ERROR_MEMORY_REFRESH) {
- printk(KERN_ERR "memory refresh error\n");
- printk(KERN_ERR "PIPEASTAT: 0x%08x\n",
- pipea_stats);
- printk(KERN_ERR "PIPEBSTAT: 0x%08x\n",
- pipeb_stats);
- /* pipestat has already been acked */
- }
- if (eir & I915_ERROR_INSTRUCTION) {
- printk(KERN_ERR "instruction error\n");
- printk(KERN_ERR " INSTPM: 0x%08x\n",
- I915_READ(INSTPM));
- if (!IS_I965G(dev)) {
- u32 ipeir = I915_READ(IPEIR);
-
- printk(KERN_ERR " IPEIR: 0x%08x\n",
- I915_READ(IPEIR));
- printk(KERN_ERR " IPEHR: 0x%08x\n",
- I915_READ(IPEHR));
- printk(KERN_ERR " INSTDONE: 0x%08x\n",
- I915_READ(INSTDONE));
- printk(KERN_ERR " ACTHD: 0x%08x\n",
- I915_READ(ACTHD));
- I915_WRITE(IPEIR, ipeir);
- (void)I915_READ(IPEIR);
- } else {
- u32 ipeir = I915_READ(IPEIR_I965);
-
- printk(KERN_ERR " IPEIR: 0x%08x\n",
- I915_READ(IPEIR_I965));
- printk(KERN_ERR " IPEHR: 0x%08x\n",
- I915_READ(IPEHR_I965));
- printk(KERN_ERR " INSTDONE: 0x%08x\n",
- I915_READ(INSTDONE_I965));
- printk(KERN_ERR " INSTPS: 0x%08x\n",
- I915_READ(INSTPS));
- printk(KERN_ERR " INSTDONE1: 0x%08x\n",
- I915_READ(INSTDONE1));
- printk(KERN_ERR " ACTHD: 0x%08x\n",
- I915_READ(ACTHD_I965));
- I915_WRITE(IPEIR_I965, ipeir);
- (void)I915_READ(IPEIR_I965);
- }
- }
-
- I915_WRITE(EIR, eir);
- (void)I915_READ(EIR);
- eir = I915_READ(EIR);
- if (eir) {
- /*
- * some errors might have become stuck,
- * mask them.
- */
- DRM_ERROR("EIR stuck: 0x%08x, masking\n", eir);
- I915_WRITE(EMR, I915_READ(EMR) | eir);
- I915_WRITE(IIR, I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT);
- }
- }
-
I915_WRITE(IIR, iir);
new_iir = I915_READ(IIR); /* Flush posted writes */
@@ -830,6 +914,7 @@ void i915_driver_irq_preinstall(struct drm_device * dev)
atomic_set(&dev_priv->irq_received, 0);
INIT_WORK(&dev_priv->hotplug_work, i915_hotplug_work_func);
+ INIT_WORK(&dev_priv->error_work, i915_error_work_func);
if (IS_IGDNG(dev)) {
igdng_irq_preinstall(dev);
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 6c085848409..2955083aa47 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -1395,6 +1395,7 @@
#define TV_V_CHROMA_42 0x684a8
/* Display Port */
+#define DP_A 0x64000 /* eDP */
#define DP_B 0x64100
#define DP_C 0x64200
#define DP_D 0x64300
@@ -1437,13 +1438,22 @@
/* Mystic DPCD version 1.1 special mode */
#define DP_ENHANCED_FRAMING (1 << 18)
+/* eDP */
+#define DP_PLL_FREQ_270MHZ (0 << 16)
+#define DP_PLL_FREQ_160MHZ (1 << 16)
+#define DP_PLL_FREQ_MASK (3 << 16)
+
/** locked once port is enabled */
#define DP_PORT_REVERSAL (1 << 15)
+/* eDP */
+#define DP_PLL_ENABLE (1 << 14)
+
/** sends the clock on lane 15 of the PEG for debug */
#define DP_CLOCK_OUTPUT_ENABLE (1 << 13)
#define DP_SCRAMBLING_DISABLE (1 << 12)
+#define DP_SCRAMBLING_DISABLE_IGDNG (1 << 7)
/** limit RGB values to avoid confusing TVs */
#define DP_COLOR_RANGE_16_235 (1 << 8)
@@ -1463,6 +1473,13 @@
* is 20 bytes in each direction, hence the 5 fixed
* data registers
*/
+#define DPA_AUX_CH_CTL 0x64010
+#define DPA_AUX_CH_DATA1 0x64014
+#define DPA_AUX_CH_DATA2 0x64018
+#define DPA_AUX_CH_DATA3 0x6401c
+#define DPA_AUX_CH_DATA4 0x64020
+#define DPA_AUX_CH_DATA5 0x64024
+
#define DPB_AUX_CH_CTL 0x64110
#define DPB_AUX_CH_DATA1 0x64114
#define DPB_AUX_CH_DATA2 0x64118
@@ -1618,7 +1635,7 @@
#define I830_FIFO_LINE_SIZE 32
#define I945_FIFO_SIZE 127 /* 945 & 965 */
#define I915_FIFO_SIZE 95
-#define I855GM_FIFO_SIZE 255
+#define I855GM_FIFO_SIZE 127 /* In cachelines */
#define I830_FIFO_SIZE 95
#define I915_MAX_WM 0x3f
@@ -1848,6 +1865,8 @@
#define PFA_CTL_1 0x68080
#define PFB_CTL_1 0x68880
#define PF_ENABLE (1<<31)
+#define PFA_WIN_SZ 0x68074
+#define PFB_WIN_SZ 0x68874
/* legacy palette */
#define LGC_PALETTE_A 0x4a000
@@ -2208,4 +2227,28 @@
#define PCH_PP_OFF_DELAYS 0xc720c
#define PCH_PP_DIVISOR 0xc7210
+#define PCH_DP_B 0xe4100
+#define PCH_DPB_AUX_CH_CTL 0xe4110
+#define PCH_DPB_AUX_CH_DATA1 0xe4114
+#define PCH_DPB_AUX_CH_DATA2 0xe4118
+#define PCH_DPB_AUX_CH_DATA3 0xe411c
+#define PCH_DPB_AUX_CH_DATA4 0xe4120
+#define PCH_DPB_AUX_CH_DATA5 0xe4124
+
+#define PCH_DP_C 0xe4200
+#define PCH_DPC_AUX_CH_CTL 0xe4210
+#define PCH_DPC_AUX_CH_DATA1 0xe4214
+#define PCH_DPC_AUX_CH_DATA2 0xe4218
+#define PCH_DPC_AUX_CH_DATA3 0xe421c
+#define PCH_DPC_AUX_CH_DATA4 0xe4220
+#define PCH_DPC_AUX_CH_DATA5 0xe4224
+
+#define PCH_DP_D 0xe4300
+#define PCH_DPD_AUX_CH_CTL 0xe4310
+#define PCH_DPD_AUX_CH_DATA1 0xe4314
+#define PCH_DPD_AUX_CH_DATA2 0xe4318
+#define PCH_DPD_AUX_CH_DATA3 0xe431c
+#define PCH_DPD_AUX_CH_DATA4 0xe4320
+#define PCH_DPD_AUX_CH_DATA5 0xe4324
+
#endif /* _I915_REG_H_ */
diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c
index 9e1d16e5c3e..1d04e1904ac 100644
--- a/drivers/gpu/drm/i915/i915_suspend.c
+++ b/drivers/gpu/drm/i915/i915_suspend.c
@@ -598,7 +598,7 @@ int i915_restore_state(struct drm_device *dev)
for (i = 0; i < 16; i++) {
I915_WRITE(SWF00 + (i << 2), dev_priv->saveSWF0[i]);
- I915_WRITE(SWF10 + (i << 2), dev_priv->saveSWF1[i+7]);
+ I915_WRITE(SWF10 + (i << 2), dev_priv->saveSWF1[i]);
}
for (i = 0; i < 3; i++)
I915_WRITE(SWF30 + (i << 2), dev_priv->saveSWF2[i]);
diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c
index 7cc44719102..300aee3296c 100644
--- a/drivers/gpu/drm/i915/intel_bios.c
+++ b/drivers/gpu/drm/i915/intel_bios.c
@@ -97,14 +97,13 @@ static void
parse_lfp_panel_data(struct drm_i915_private *dev_priv,
struct bdb_header *bdb)
{
- struct drm_device *dev = dev_priv->dev;
struct bdb_lvds_options *lvds_options;
struct bdb_lvds_lfp_data *lvds_lfp_data;
struct bdb_lvds_lfp_data_ptrs *lvds_lfp_data_ptrs;
struct bdb_lvds_lfp_data_entry *entry;
struct lvds_dvo_timing *dvo_timing;
struct drm_display_mode *panel_fixed_mode;
- int lfp_data_size;
+ int lfp_data_size, dvo_timing_offset;
/* Defaults if we can't find VBT info */
dev_priv->lvds_dither = 0;
@@ -133,14 +132,16 @@ parse_lfp_panel_data(struct drm_i915_private *dev_priv,
entry = (struct bdb_lvds_lfp_data_entry *)
((uint8_t *)lvds_lfp_data->data + (lfp_data_size *
lvds_options->panel_type));
+ dvo_timing_offset = lvds_lfp_data_ptrs->ptr[0].dvo_timing_offset -
+ lvds_lfp_data_ptrs->ptr[0].fp_timing_offset;
- /* On IGDNG mobile, LVDS data block removes panel fitting registers.
- So dec 2 dword from dvo_timing offset */
- if (IS_IGDNG(dev))
- dvo_timing = (struct lvds_dvo_timing *)
- ((u8 *)&entry->dvo_timing - 8);
- else
- dvo_timing = &entry->dvo_timing;
+ /*
+ * the size of fp_timing varies on the different platform.
+ * So calculate the DVO timing relative offset in LVDS data
+ * entry to get the DVO timing entry
+ */
+ dvo_timing = (struct lvds_dvo_timing *)
+ ((unsigned char *)entry + dvo_timing_offset);
panel_fixed_mode = kzalloc(sizeof(*panel_fixed_mode), GFP_KERNEL);
@@ -295,6 +296,25 @@ parse_sdvo_device_mapping(struct drm_i915_private *dev_priv,
}
return;
}
+
+static void
+parse_driver_features(struct drm_i915_private *dev_priv,
+ struct bdb_header *bdb)
+{
+ struct drm_device *dev = dev_priv->dev;
+ struct bdb_driver_features *driver;
+
+ /* set default for chips without eDP */
+ if (!SUPPORTS_EDP(dev)) {
+ dev_priv->edp_support = 0;
+ return;
+ }
+
+ driver = find_section(bdb, BDB_DRIVER_FEATURES);
+ if (driver && driver->lvds_config == BDB_DRIVER_FEATURE_EDP)
+ dev_priv->edp_support = 1;
+}
+
/**
* intel_init_bios - initialize VBIOS settings & find VBT
* @dev: DRM device
@@ -345,6 +365,8 @@ intel_init_bios(struct drm_device *dev)
parse_lfp_panel_data(dev_priv, bdb);
parse_sdvo_panel_data(dev_priv, bdb);
parse_sdvo_device_mapping(dev_priv, bdb);
+ parse_driver_features(dev_priv, bdb);
+
pci_unmap_rom(pdev, bios);
return 0;
diff --git a/drivers/gpu/drm/i915/intel_bios.h b/drivers/gpu/drm/i915/intel_bios.h
index fe72e1c225d..0f8e5f69ac7 100644
--- a/drivers/gpu/drm/i915/intel_bios.h
+++ b/drivers/gpu/drm/i915/intel_bios.h
@@ -381,6 +381,51 @@ struct bdb_sdvo_lvds_options {
} __attribute__((packed));
+#define BDB_DRIVER_FEATURE_NO_LVDS 0
+#define BDB_DRIVER_FEATURE_INT_LVDS 1
+#define BDB_DRIVER_FEATURE_SDVO_LVDS 2
+#define BDB_DRIVER_FEATURE_EDP 3
+
+struct bdb_driver_features {
+ u8 boot_dev_algorithm:1;
+ u8 block_display_switch:1;
+ u8 allow_display_switch:1;
+ u8 hotplug_dvo:1;
+ u8 dual_view_zoom:1;
+ u8 int15h_hook:1;
+ u8 sprite_in_clone:1;
+ u8 primary_lfp_id:1;
+
+ u16 boot_mode_x;
+ u16 boot_mode_y;
+ u8 boot_mode_bpp;
+ u8 boot_mode_refresh;
+
+ u16 enable_lfp_primary:1;
+ u16 selective_mode_pruning:1;
+ u16 dual_frequency:1;
+ u16 render_clock_freq:1; /* 0: high freq; 1: low freq */
+ u16 nt_clone_support:1;
+ u16 power_scheme_ui:1; /* 0: CUI; 1: 3rd party */
+ u16 sprite_display_assign:1; /* 0: secondary; 1: primary */
+ u16 cui_aspect_scaling:1;
+ u16 preserve_aspect_ratio:1;
+ u16 sdvo_device_power_down:1;
+ u16 crt_hotplug:1;
+ u16 lvds_config:2;
+ u16 tv_hotplug:1;
+ u16 hdmi_config:2;
+
+ u8 static_display:1;
+ u8 reserved2:7;
+ u16 legacy_crt_max_x;
+ u16 legacy_crt_max_y;
+ u8 legacy_crt_max_refresh;
+
+ u8 hdmi_termination;
+ u8 custom_vbt_version;
+} __attribute__((packed));
+
bool intel_init_bios(struct drm_device *dev);
/*
diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index d6a1a6e5539..4cf8e2e88a4 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -156,6 +156,9 @@ static bool intel_igdng_crt_detect_hotplug(struct drm_connector *connector)
temp = adpa = I915_READ(PCH_ADPA);
+ adpa &= ~ADPA_DAC_ENABLE;
+ I915_WRITE(PCH_ADPA, adpa);
+
adpa &= ~ADPA_CRT_HOTPLUG_MASK;
adpa |= (ADPA_CRT_HOTPLUG_PERIOD_128 |
@@ -169,13 +172,14 @@ static bool intel_igdng_crt_detect_hotplug(struct drm_connector *connector)
DRM_DEBUG("pch crt adpa 0x%x", adpa);
I915_WRITE(PCH_ADPA, adpa);
- /* This might not be needed as not specified in spec...*/
- udelay(1000);
+ while ((I915_READ(PCH_ADPA) & ADPA_CRT_HOTPLUG_FORCE_TRIGGER) != 0)
+ ;
/* Check the status to see if both blue and green are on now */
adpa = I915_READ(PCH_ADPA);
- if ((adpa & ADPA_CRT_HOTPLUG_MONITOR_MASK) ==
- ADPA_CRT_HOTPLUG_MONITOR_COLOR)
+ adpa &= ADPA_CRT_HOTPLUG_MONITOR_MASK;
+ if ((adpa == ADPA_CRT_HOTPLUG_MONITOR_COLOR) ||
+ (adpa == ADPA_CRT_HOTPLUG_MONITOR_MONO))
ret = true;
else
ret = false;
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 508838ee31e..d6fce213341 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -34,6 +34,8 @@
#include "drm_crtc_helper.h"
+#define HAS_eDP (intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))
+
bool intel_pipe_has_type (struct drm_crtc *crtc, int type);
static void intel_update_watermarks(struct drm_device *dev);
@@ -88,7 +90,7 @@ struct intel_limit {
#define I8XX_P2_SLOW 4
#define I8XX_P2_FAST 2
#define I8XX_P2_LVDS_SLOW 14
-#define I8XX_P2_LVDS_FAST 14 /* No fast option */
+#define I8XX_P2_LVDS_FAST 7
#define I8XX_P2_SLOW_LIMIT 165000
#define I9XX_DOT_MIN 20000
@@ -268,6 +270,9 @@ intel_igdng_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
static bool
intel_find_pll_g4x_dp(const intel_limit_t *, struct drm_crtc *crtc,
int target, int refclk, intel_clock_t *best_clock);
+static bool
+intel_find_pll_igdng_dp(const intel_limit_t *, struct drm_crtc *crtc,
+ int target, int refclk, intel_clock_t *best_clock);
static const intel_limit_t intel_limits_i8xx_dvo = {
.dot = { .min = I8XX_DOT_MIN, .max = I8XX_DOT_MAX },
@@ -598,6 +603,23 @@ bool intel_pipe_has_type (struct drm_crtc *crtc, int type)
return false;
}
+struct drm_connector *
+intel_pipe_get_output (struct drm_crtc *crtc)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_mode_config *mode_config = &dev->mode_config;
+ struct drm_connector *l_entry, *ret = NULL;
+
+ list_for_each_entry(l_entry, &mode_config->connector_list, head) {
+ if (l_entry->encoder &&
+ l_entry->encoder->crtc == crtc) {
+ ret = l_entry;
+ break;
+ }
+ }
+ return ret;
+}
+
#define INTELPllInvalid(s) do { /* DRM_DEBUG(s); */ return false; } while (0)
/**
* Returns whether the given set of divisors are valid for a given refclk with
@@ -645,7 +667,7 @@ intel_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
int err = target;
if (IS_I9XX(dev) && intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
- (I915_READ(LVDS) & LVDS_PORT_EN) != 0) {
+ (I915_READ(LVDS)) != 0) {
/*
* For LVDS, if the panel is on, just rely on its current
* settings for dual-channel. We haven't figured out how to
@@ -752,6 +774,30 @@ intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
}
static bool
+intel_find_pll_igdng_dp(const intel_limit_t *limit, struct drm_crtc *crtc,
+ int target, int refclk, intel_clock_t *best_clock)
+{
+ struct drm_device *dev = crtc->dev;
+ intel_clock_t clock;
+ if (target < 200000) {
+ clock.n = 1;
+ clock.p1 = 2;
+ clock.p2 = 10;
+ clock.m1 = 12;
+ clock.m2 = 9;
+ } else {
+ clock.n = 2;
+ clock.p1 = 1;
+ clock.p2 = 10;
+ clock.m1 = 14;
+ clock.m2 = 8;
+ }
+ intel_clock(dev, refclk, &clock);
+ memcpy(best_clock, &clock, sizeof(intel_clock_t));
+ return true;
+}
+
+static bool
intel_igdng_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
int target, int refclk, intel_clock_t *best_clock)
{
@@ -763,6 +809,14 @@ intel_igdng_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
int err_most = 47;
found = false;
+ /* eDP has only 2 clock choice, no n/m/p setting */
+ if (HAS_eDP)
+ return true;
+
+ if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT))
+ return intel_find_pll_igdng_dp(limit, crtc, target,
+ refclk, best_clock);
+
if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
if ((I915_READ(LVDS) & LVDS_CLKB_POWER_MASK) ==
LVDS_CLKB_POWER_UP)
@@ -998,6 +1052,90 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
return 0;
}
+/* Disable the VGA plane that we never use */
+static void i915_disable_vga (struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ u8 sr1;
+ u32 vga_reg;
+
+ if (IS_IGDNG(dev))
+ vga_reg = CPU_VGACNTRL;
+ else
+ vga_reg = VGACNTRL;
+
+ if (I915_READ(vga_reg) & VGA_DISP_DISABLE)
+ return;
+
+ I915_WRITE8(VGA_SR_INDEX, 1);
+ sr1 = I915_READ8(VGA_SR_DATA);
+ I915_WRITE8(VGA_SR_DATA, sr1 | (1 << 5));
+ udelay(100);
+
+ I915_WRITE(vga_reg, VGA_DISP_DISABLE);
+}
+
+static void igdng_disable_pll_edp (struct drm_crtc *crtc)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ u32 dpa_ctl;
+
+ DRM_DEBUG("\n");
+ dpa_ctl = I915_READ(DP_A);
+ dpa_ctl &= ~DP_PLL_ENABLE;
+ I915_WRITE(DP_A, dpa_ctl);
+}
+
+static void igdng_enable_pll_edp (struct drm_crtc *crtc)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ u32 dpa_ctl;
+
+ dpa_ctl = I915_READ(DP_A);
+ dpa_ctl |= DP_PLL_ENABLE;
+ I915_WRITE(DP_A, dpa_ctl);
+ udelay(200);
+}
+
+
+static void igdng_set_pll_edp (struct drm_crtc *crtc, int clock)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ u32 dpa_ctl;
+
+ DRM_DEBUG("eDP PLL enable for clock %d\n", clock);
+ dpa_ctl = I915_READ(DP_A);
+ dpa_ctl &= ~DP_PLL_FREQ_MASK;
+
+ if (clock < 200000) {
+ u32 temp;
+ dpa_ctl |= DP_PLL_FREQ_160MHZ;
+ /* workaround for 160Mhz:
+ 1) program 0x4600c bits 15:0 = 0x8124
+ 2) program 0x46010 bit 0 = 1
+ 3) program 0x46034 bit 24 = 1
+ 4) program 0x64000 bit 14 = 1
+ */
+ temp = I915_READ(0x4600c);
+ temp &= 0xffff0000;
+ I915_WRITE(0x4600c, temp | 0x8124);
+
+ temp = I915_READ(0x46010);
+ I915_WRITE(0x46010, temp | 1);
+
+ temp = I915_READ(0x46034);
+ I915_WRITE(0x46034, temp | (1 << 24));
+ } else {
+ dpa_ctl |= DP_PLL_FREQ_270MHZ;
+ }
+ I915_WRITE(DP_A, dpa_ctl);
+
+ udelay(500);
+}
+
static void igdng_crtc_dpms(struct drm_crtc *crtc, int mode)
{
struct drm_device *dev = crtc->dev;
@@ -1015,6 +1153,7 @@ static void igdng_crtc_dpms(struct drm_crtc *crtc, int mode)
int fdi_rx_imr_reg = (pipe == 0) ? FDI_RXA_IMR : FDI_RXB_IMR;
int transconf_reg = (pipe == 0) ? TRANSACONF : TRANSBCONF;
int pf_ctl_reg = (pipe == 0) ? PFA_CTL_1 : PFB_CTL_1;
+ int pf_win_size = (pipe == 0) ? PFA_WIN_SZ : PFB_WIN_SZ;
int cpu_htot_reg = (pipe == 0) ? HTOTAL_A : HTOTAL_B;
int cpu_hblank_reg = (pipe == 0) ? HBLANK_A : HBLANK_B;
int cpu_hsync_reg = (pipe == 0) ? HSYNC_A : HSYNC_B;
@@ -1028,7 +1167,7 @@ static void igdng_crtc_dpms(struct drm_crtc *crtc, int mode)
int trans_vblank_reg = (pipe == 0) ? TRANS_VBLANK_A : TRANS_VBLANK_B;
int trans_vsync_reg = (pipe == 0) ? TRANS_VSYNC_A : TRANS_VSYNC_B;
u32 temp;
- int tries = 5, j;
+ int tries = 5, j, n;
/* XXX: When our outputs are all unaware of DPMS modes other than off
* and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC.
@@ -1038,27 +1177,32 @@ static void igdng_crtc_dpms(struct drm_crtc *crtc, int mode)
case DRM_MODE_DPMS_STANDBY:
case DRM_MODE_DPMS_SUSPEND:
DRM_DEBUG("crtc %d dpms on\n", pipe);
- /* enable PCH DPLL */
- temp = I915_READ(pch_dpll_reg);
- if ((temp & DPLL_VCO_ENABLE) == 0) {
- I915_WRITE(pch_dpll_reg, temp | DPLL_VCO_ENABLE);
- I915_READ(pch_dpll_reg);
- }
-
- /* enable PCH FDI RX PLL, wait warmup plus DMI latency */
- temp = I915_READ(fdi_rx_reg);
- I915_WRITE(fdi_rx_reg, temp | FDI_RX_PLL_ENABLE |
- FDI_SEL_PCDCLK |
- FDI_DP_PORT_WIDTH_X4); /* default 4 lanes */
- I915_READ(fdi_rx_reg);
- udelay(200);
+ if (HAS_eDP) {
+ /* enable eDP PLL */
+ igdng_enable_pll_edp(crtc);
+ } else {
+ /* enable PCH DPLL */
+ temp = I915_READ(pch_dpll_reg);
+ if ((temp & DPLL_VCO_ENABLE) == 0) {
+ I915_WRITE(pch_dpll_reg, temp | DPLL_VCO_ENABLE);
+ I915_READ(pch_dpll_reg);
+ }
- /* Enable CPU FDI TX PLL, always on for IGDNG */
- temp = I915_READ(fdi_tx_reg);
- if ((temp & FDI_TX_PLL_ENABLE) == 0) {
- I915_WRITE(fdi_tx_reg, temp | FDI_TX_PLL_ENABLE);
- I915_READ(fdi_tx_reg);
- udelay(100);
+ /* enable PCH FDI RX PLL, wait warmup plus DMI latency */
+ temp = I915_READ(fdi_rx_reg);
+ I915_WRITE(fdi_rx_reg, temp | FDI_RX_PLL_ENABLE |
+ FDI_SEL_PCDCLK |
+ FDI_DP_PORT_WIDTH_X4); /* default 4 lanes */
+ I915_READ(fdi_rx_reg);
+ udelay(200);
+
+ /* Enable CPU FDI TX PLL, always on for IGDNG */
+ temp = I915_READ(fdi_tx_reg);
+ if ((temp & FDI_TX_PLL_ENABLE) == 0) {
+ I915_WRITE(fdi_tx_reg, temp | FDI_TX_PLL_ENABLE);
+ I915_READ(fdi_tx_reg);
+ udelay(100);
+ }
}
/* Enable CPU pipe */
@@ -1077,122 +1221,126 @@ static void igdng_crtc_dpms(struct drm_crtc *crtc, int mode)
I915_WRITE(dspbase_reg, I915_READ(dspbase_reg));
}
- /* enable CPU FDI TX and PCH FDI RX */
- temp = I915_READ(fdi_tx_reg);
- temp |= FDI_TX_ENABLE;
- temp |= FDI_DP_PORT_WIDTH_X4; /* default */
- temp &= ~FDI_LINK_TRAIN_NONE;
- temp |= FDI_LINK_TRAIN_PATTERN_1;
- I915_WRITE(fdi_tx_reg, temp);
- I915_READ(fdi_tx_reg);
+ if (!HAS_eDP) {
+ /* enable CPU FDI TX and PCH FDI RX */
+ temp = I915_READ(fdi_tx_reg);
+ temp |= FDI_TX_ENABLE;
+ temp |= FDI_DP_PORT_WIDTH_X4; /* default */
+ temp &= ~FDI_LINK_TRAIN_NONE;
+ temp |= FDI_LINK_TRAIN_PATTERN_1;
+ I915_WRITE(fdi_tx_reg, temp);
+ I915_READ(fdi_tx_reg);
- temp = I915_READ(fdi_rx_reg);
- temp &= ~FDI_LINK_TRAIN_NONE;
- temp |= FDI_LINK_TRAIN_PATTERN_1;
- I915_WRITE(fdi_rx_reg, temp | FDI_RX_ENABLE);
- I915_READ(fdi_rx_reg);
+ temp = I915_READ(fdi_rx_reg);
+ temp &= ~FDI_LINK_TRAIN_NONE;
+ temp |= FDI_LINK_TRAIN_PATTERN_1;
+ I915_WRITE(fdi_rx_reg, temp | FDI_RX_ENABLE);
+ I915_READ(fdi_rx_reg);
- udelay(150);
+ udelay(150);
- /* Train FDI. */
- /* umask FDI RX Interrupt symbol_lock and bit_lock bit
- for train result */
- temp = I915_READ(fdi_rx_imr_reg);
- temp &= ~FDI_RX_SYMBOL_LOCK;
- temp &= ~FDI_RX_BIT_LOCK;
- I915_WRITE(fdi_rx_imr_reg, temp);
- I915_READ(fdi_rx_imr_reg);
- udelay(150);
+ /* Train FDI. */
+ /* umask FDI RX Interrupt symbol_lock and bit_lock bit
+ for train result */
+ temp = I915_READ(fdi_rx_imr_reg);
+ temp &= ~FDI_RX_SYMBOL_LOCK;
+ temp &= ~FDI_RX_BIT_LOCK;
+ I915_WRITE(fdi_rx_imr_reg, temp);
+ I915_READ(fdi_rx_imr_reg);
+ udelay(150);
- temp = I915_READ(fdi_rx_iir_reg);
- DRM_DEBUG("FDI_RX_IIR 0x%x\n", temp);
+ temp = I915_READ(fdi_rx_iir_reg);
+ DRM_DEBUG("FDI_RX_IIR 0x%x\n", temp);
- if ((temp & FDI_RX_BIT_LOCK) == 0) {
- for (j = 0; j < tries; j++) {
- temp = I915_READ(fdi_rx_iir_reg);
- DRM_DEBUG("FDI_RX_IIR 0x%x\n", temp);
- if (temp & FDI_RX_BIT_LOCK)
- break;
- udelay(200);
- }
- if (j != tries)
+ if ((temp & FDI_RX_BIT_LOCK) == 0) {
+ for (j = 0; j < tries; j++) {
+ temp = I915_READ(fdi_rx_iir_reg);
+ DRM_DEBUG("FDI_RX_IIR 0x%x\n", temp);
+ if (temp & FDI_RX_BIT_LOCK)
+ break;
+ udelay(200);
+ }
+ if (j != tries)
+ I915_WRITE(fdi_rx_iir_reg,
+ temp | FDI_RX_BIT_LOCK);
+ else
+ DRM_DEBUG("train 1 fail\n");
+ } else {
I915_WRITE(fdi_rx_iir_reg,
temp | FDI_RX_BIT_LOCK);
- else
- DRM_DEBUG("train 1 fail\n");
- } else {
- I915_WRITE(fdi_rx_iir_reg,
- temp | FDI_RX_BIT_LOCK);
- DRM_DEBUG("train 1 ok 2!\n");
- }
- temp = I915_READ(fdi_tx_reg);
- temp &= ~FDI_LINK_TRAIN_NONE;
- temp |= FDI_LINK_TRAIN_PATTERN_2;
- I915_WRITE(fdi_tx_reg, temp);
-
- temp = I915_READ(fdi_rx_reg);
- temp &= ~FDI_LINK_TRAIN_NONE;
- temp |= FDI_LINK_TRAIN_PATTERN_2;
- I915_WRITE(fdi_rx_reg, temp);
+ DRM_DEBUG("train 1 ok 2!\n");
+ }
+ temp = I915_READ(fdi_tx_reg);
+ temp &= ~FDI_LINK_TRAIN_NONE;
+ temp |= FDI_LINK_TRAIN_PATTERN_2;
+ I915_WRITE(fdi_tx_reg, temp);
+
+ temp = I915_READ(fdi_rx_reg);
+ temp &= ~FDI_LINK_TRAIN_NONE;
+ temp |= FDI_LINK_TRAIN_PATTERN_2;
+ I915_WRITE(fdi_rx_reg, temp);
- udelay(150);
+ udelay(150);
- temp = I915_READ(fdi_rx_iir_reg);
- DRM_DEBUG("FDI_RX_IIR 0x%x\n", temp);
+ temp = I915_READ(fdi_rx_iir_reg);
+ DRM_DEBUG("FDI_RX_IIR 0x%x\n", temp);
- if ((temp & FDI_RX_SYMBOL_LOCK) == 0) {
- for (j = 0; j < tries; j++) {
- temp = I915_READ(fdi_rx_iir_reg);
- DRM_DEBUG("FDI_RX_IIR 0x%x\n", temp);
- if (temp & FDI_RX_SYMBOL_LOCK)
- break;
- udelay(200);
- }
- if (j != tries) {
+ if ((temp & FDI_RX_SYMBOL_LOCK) == 0) {
+ for (j = 0; j < tries; j++) {
+ temp = I915_READ(fdi_rx_iir_reg);
+ DRM_DEBUG("FDI_RX_IIR 0x%x\n", temp);
+ if (temp & FDI_RX_SYMBOL_LOCK)
+ break;
+ udelay(200);
+ }
+ if (j != tries) {
+ I915_WRITE(fdi_rx_iir_reg,
+ temp | FDI_RX_SYMBOL_LOCK);
+ DRM_DEBUG("train 2 ok 1!\n");
+ } else
+ DRM_DEBUG("train 2 fail\n");
+ } else {
I915_WRITE(fdi_rx_iir_reg,
temp | FDI_RX_SYMBOL_LOCK);
- DRM_DEBUG("train 2 ok 1!\n");
- } else
- DRM_DEBUG("train 2 fail\n");
- } else {
- I915_WRITE(fdi_rx_iir_reg, temp | FDI_RX_SYMBOL_LOCK);
- DRM_DEBUG("train 2 ok 2!\n");
- }
- DRM_DEBUG("train done\n");
+ DRM_DEBUG("train 2 ok 2!\n");
+ }
+ DRM_DEBUG("train done\n");
- /* set transcoder timing */
- I915_WRITE(trans_htot_reg, I915_READ(cpu_htot_reg));
- I915_WRITE(trans_hblank_reg, I915_READ(cpu_hblank_reg));
- I915_WRITE(trans_hsync_reg, I915_READ(cpu_hsync_reg));
+ /* set transcoder timing */
+ I915_WRITE(trans_htot_reg, I915_READ(cpu_htot_reg));
+ I915_WRITE(trans_hblank_reg, I915_READ(cpu_hblank_reg));
+ I915_WRITE(trans_hsync_reg, I915_READ(cpu_hsync_reg));
- I915_WRITE(trans_vtot_reg, I915_READ(cpu_vtot_reg));
- I915_WRITE(trans_vblank_reg, I915_READ(cpu_vblank_reg));
- I915_WRITE(trans_vsync_reg, I915_READ(cpu_vsync_reg));
+ I915_WRITE(trans_vtot_reg, I915_READ(cpu_vtot_reg));
+ I915_WRITE(trans_vblank_reg, I915_READ(cpu_vblank_reg));
+ I915_WRITE(trans_vsync_reg, I915_READ(cpu_vsync_reg));
- /* enable PCH transcoder */
- temp = I915_READ(transconf_reg);
- I915_WRITE(transconf_reg, temp | TRANS_ENABLE);
- I915_READ(transconf_reg);
+ /* enable PCH transcoder */
+ temp = I915_READ(transconf_reg);
+ I915_WRITE(transconf_reg, temp | TRANS_ENABLE);
+ I915_READ(transconf_reg);
- while ((I915_READ(transconf_reg) & TRANS_STATE_ENABLE) == 0)
- ;
+ while ((I915_READ(transconf_reg) & TRANS_STATE_ENABLE) == 0)
+ ;
- /* enable normal */
+ /* enable normal */
- temp = I915_READ(fdi_tx_reg);
- temp &= ~FDI_LINK_TRAIN_NONE;
- I915_WRITE(fdi_tx_reg, temp | FDI_LINK_TRAIN_NONE |
- FDI_TX_ENHANCE_FRAME_ENABLE);
- I915_READ(fdi_tx_reg);
+ temp = I915_READ(fdi_tx_reg);
+ temp &= ~FDI_LINK_TRAIN_NONE;
+ I915_WRITE(fdi_tx_reg, temp | FDI_LINK_TRAIN_NONE |
+ FDI_TX_ENHANCE_FRAME_ENABLE);
+ I915_READ(fdi_tx_reg);
- temp = I915_READ(fdi_rx_reg);
- temp &= ~FDI_LINK_TRAIN_NONE;
- I915_WRITE(fdi_rx_reg, temp | FDI_LINK_TRAIN_NONE |
- FDI_RX_ENHANCE_FRAME_ENABLE);
- I915_READ(fdi_rx_reg);
+ temp = I915_READ(fdi_rx_reg);
+ temp &= ~FDI_LINK_TRAIN_NONE;
+ I915_WRITE(fdi_rx_reg, temp | FDI_LINK_TRAIN_NONE |
+ FDI_RX_ENHANCE_FRAME_ENABLE);
+ I915_READ(fdi_rx_reg);
- /* wait one idle pattern time */
- udelay(100);
+ /* wait one idle pattern time */
+ udelay(100);
+
+ }
intel_crtc_load_lut(crtc);
@@ -1200,8 +1348,7 @@ static void igdng_crtc_dpms(struct drm_crtc *crtc, int mode)
case DRM_MODE_DPMS_OFF:
DRM_DEBUG("crtc %d dpms off\n", pipe);
- /* Disable the VGA plane that we never use */
- I915_WRITE(CPU_VGACNTRL, VGA_DISP_DISABLE);
+ i915_disable_vga(dev);
/* Disable display plane */
temp = I915_READ(dspcntr_reg);
@@ -1217,17 +1364,23 @@ static void igdng_crtc_dpms(struct drm_crtc *crtc, int mode)
if ((temp & PIPEACONF_ENABLE) != 0) {
I915_WRITE(pipeconf_reg, temp & ~PIPEACONF_ENABLE);
I915_READ(pipeconf_reg);
+ n = 0;
/* wait for cpu pipe off, pipe state */
- while ((I915_READ(pipeconf_reg) & I965_PIPECONF_ACTIVE) != 0)
- ;
+ while ((I915_READ(pipeconf_reg) & I965_PIPECONF_ACTIVE) != 0) {
+ n++;
+ if (n < 60) {
+ udelay(500);
+ continue;
+ } else {
+ DRM_DEBUG("pipe %d off delay\n", pipe);
+ break;
+ }
+ }
} else
DRM_DEBUG("crtc %d is disabled\n", pipe);
- /* IGDNG-A : disable cpu panel fitter ? */
- temp = I915_READ(pf_ctl_reg);
- if ((temp & PF_ENABLE) != 0) {
- I915_WRITE(pf_ctl_reg, temp & ~PF_ENABLE);
- I915_READ(pf_ctl_reg);
+ if (HAS_eDP) {
+ igdng_disable_pll_edp(crtc);
}
/* disable CPU FDI tx and PCH FDI rx */
@@ -1239,6 +1392,8 @@ static void igdng_crtc_dpms(struct drm_crtc *crtc, int mode)
I915_WRITE(fdi_rx_reg, temp & ~FDI_RX_ENABLE);
I915_READ(fdi_rx_reg);
+ udelay(100);
+
/* still set train pattern 1 */
temp = I915_READ(fdi_tx_reg);
temp &= ~FDI_LINK_TRAIN_NONE;
@@ -1250,14 +1405,25 @@ static void igdng_crtc_dpms(struct drm_crtc *crtc, int mode)
temp |= FDI_LINK_TRAIN_PATTERN_1;
I915_WRITE(fdi_rx_reg, temp);
+ udelay(100);
+
/* disable PCH transcoder */
temp = I915_READ(transconf_reg);
if ((temp & TRANS_ENABLE) != 0) {
I915_WRITE(transconf_reg, temp & ~TRANS_ENABLE);
I915_READ(transconf_reg);
+ n = 0;
/* wait for PCH transcoder off, transcoder state */
- while ((I915_READ(transconf_reg) & TRANS_STATE_ENABLE) != 0)
- ;
+ while ((I915_READ(transconf_reg) & TRANS_STATE_ENABLE) != 0) {
+ n++;
+ if (n < 60) {
+ udelay(500);
+ continue;
+ } else {
+ DRM_DEBUG("transcoder %d off delay\n", pipe);
+ break;
+ }
+ }
}
/* disable PCH DPLL */
@@ -1275,6 +1441,22 @@ static void igdng_crtc_dpms(struct drm_crtc *crtc, int mode)
I915_READ(fdi_rx_reg);
}
+ /* Disable CPU FDI TX PLL */
+ temp = I915_READ(fdi_tx_reg);
+ if ((temp & FDI_TX_PLL_ENABLE) != 0) {
+ I915_WRITE(fdi_tx_reg, temp & ~FDI_TX_PLL_ENABLE);
+ I915_READ(fdi_tx_reg);
+ udelay(100);
+ }
+
+ /* Disable PF */
+ temp = I915_READ(pf_ctl_reg);
+ if ((temp & PF_ENABLE) != 0) {
+ I915_WRITE(pf_ctl_reg, temp & ~PF_ENABLE);
+ I915_READ(pf_ctl_reg);
+ }
+ I915_WRITE(pf_win_size, 0);
+
/* Wait for the clocks to turn off. */
udelay(150);
break;
@@ -1342,7 +1524,7 @@ static void i9xx_crtc_dpms(struct drm_crtc *crtc, int mode)
//intel_crtc_dpms_video(crtc, FALSE); TODO
/* Disable the VGA plane that we never use */
- I915_WRITE(VGACNTRL, VGA_DISP_DISABLE);
+ i915_disable_vga(dev);
/* Disable display plane */
temp = I915_READ(dspcntr_reg);
@@ -1623,48 +1805,72 @@ static struct intel_watermark_params igd_cursor_hplloff_wm = {
IGD_FIFO_LINE_SIZE
};
static struct intel_watermark_params i945_wm_info = {
- I915_FIFO_LINE_SIZE,
+ I945_FIFO_SIZE,
I915_MAX_WM,
1,
- 0,
- IGD_FIFO_LINE_SIZE
+ 2,
+ I915_FIFO_LINE_SIZE
};
static struct intel_watermark_params i915_wm_info = {
- I945_FIFO_SIZE,
+ I915_FIFO_SIZE,
I915_MAX_WM,
1,
- 0,
+ 2,
I915_FIFO_LINE_SIZE
};
static struct intel_watermark_params i855_wm_info = {
I855GM_FIFO_SIZE,
I915_MAX_WM,
1,
- 0,
+ 2,
I830_FIFO_LINE_SIZE
};
static struct intel_watermark_params i830_wm_info = {
I830_FIFO_SIZE,
I915_MAX_WM,
1,
- 0,
+ 2,
I830_FIFO_LINE_SIZE
};
+/**
+ * intel_calculate_wm - calculate watermark level
+ * @clock_in_khz: pixel clock
+ * @wm: chip FIFO params
+ * @pixel_size: display pixel size
+ * @latency_ns: memory latency for the platform
+ *
+ * Calculate the watermark level (the level at which the display plane will
+ * start fetching from memory again). Each chip has a different display
+ * FIFO size and allocation, so the caller needs to figure that out and pass
+ * in the correct intel_watermark_params structure.
+ *
+ * As the pixel clock runs, the FIFO will be drained at a rate that depends
+ * on the pixel size. When it reaches the watermark level, it'll start
+ * fetching FIFO line sized based chunks from memory until the FIFO fills
+ * past the watermark point. If the FIFO drains completely, a FIFO underrun
+ * will occur, and a display engine hang could result.
+ */
static unsigned long intel_calculate_wm(unsigned long clock_in_khz,
struct intel_watermark_params *wm,
int pixel_size,
unsigned long latency_ns)
{
- unsigned long bytes_required, wm_size;
+ long entries_required, wm_size;
+
+ entries_required = (clock_in_khz * pixel_size * latency_ns) / 1000000;
+ entries_required /= wm->cacheline_size;
- bytes_required = (clock_in_khz * pixel_size * latency_ns) / 1000000;
- bytes_required /= wm->cacheline_size;
- wm_size = wm->fifo_size - bytes_required - wm->guard_size;
+ DRM_DEBUG("FIFO entries required for mode: %d\n", entries_required);
- if (wm_size > wm->max_wm)
+ wm_size = wm->fifo_size - (entries_required + wm->guard_size);
+
+ DRM_DEBUG("FIFO watermark level: %d\n", wm_size);
+
+ /* Don't promote wm_size to unsigned... */
+ if (wm_size > (long)wm->max_wm)
wm_size = wm->max_wm;
- if (wm_size == 0)
+ if (wm_size <= 0)
wm_size = wm->default_wm;
return wm_size;
}
@@ -1799,8 +2005,40 @@ static void igd_enable_cxsr(struct drm_device *dev, unsigned long clock,
return;
}
-const static int latency_ns = 5000; /* default for non-igd platforms */
+const static int latency_ns = 3000; /* default for non-igd platforms */
+static int intel_get_fifo_size(struct drm_device *dev, int plane)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ uint32_t dsparb = I915_READ(DSPARB);
+ int size;
+
+ if (IS_I9XX(dev)) {
+ if (plane == 0)
+ size = dsparb & 0x7f;
+ else
+ size = ((dsparb >> DSPARB_CSTART_SHIFT) & 0x7f) -
+ (dsparb & 0x7f);
+ } else if (IS_I85X(dev)) {
+ if (plane == 0)
+ size = dsparb & 0x1ff;
+ else
+ size = ((dsparb >> DSPARB_BEND_SHIFT) & 0x1ff) -
+ (dsparb & 0x1ff);
+ size >>= 1; /* Convert to cachelines */
+ } else if (IS_845G(dev)) {
+ size = dsparb & 0x7f;
+ size >>= 2; /* Convert to cachelines */
+ } else {
+ size = dsparb & 0x7f;
+ size >>= 1; /* Convert to cachelines */
+ }
+
+ DRM_DEBUG("FIFO size - (0x%08x) %s: %d\n", dsparb, plane ? "B" : "A",
+ size);
+
+ return size;
+}
static void i965_update_wm(struct drm_device *dev)
{
@@ -1817,101 +2055,89 @@ static void i9xx_update_wm(struct drm_device *dev, int planea_clock,
int planeb_clock, int sr_hdisplay, int pixel_size)
{
struct drm_i915_private *dev_priv = dev->dev_private;
- uint32_t fwater_lo = I915_READ(FW_BLC) & MM_FIFO_WATERMARK;
- uint32_t fwater_hi = I915_READ(FW_BLC2) & LM_FIFO_WATERMARK;
- int bsize, asize, cwm, bwm = 1, awm = 1, srwm = 1;
- uint32_t dsparb = I915_READ(DSPARB);
- int planea_entries, planeb_entries;
- struct intel_watermark_params *wm_params;
+ uint32_t fwater_lo;
+ uint32_t fwater_hi;
+ int total_size, cacheline_size, cwm, srwm = 1;
+ int planea_wm, planeb_wm;
+ struct intel_watermark_params planea_params, planeb_params;
unsigned long line_time_us;
int sr_clock, sr_entries = 0;
+ /* Create copies of the base settings for each pipe */
if (IS_I965GM(dev) || IS_I945GM(dev))
- wm_params = &i945_wm_info;
+ planea_params = planeb_params = i945_wm_info;
else if (IS_I9XX(dev))
- wm_params = &i915_wm_info;
+ planea_params = planeb_params = i915_wm_info;
else
- wm_params = &i855_wm_info;
-
- planea_entries = intel_calculate_wm(planea_clock, wm_params,
- pixel_size, latency_ns);
- planeb_entries = intel_calculate_wm(planeb_clock, wm_params,
- pixel_size, latency_ns);
-
- DRM_DEBUG("FIFO entries - A: %d, B: %d\n", planea_entries,
- planeb_entries);
+ planea_params = planeb_params = i855_wm_info;
- if (IS_I9XX(dev)) {
- asize = dsparb & 0x7f;
- bsize = (dsparb >> DSPARB_CSTART_SHIFT) & 0x7f;
- } else {
- asize = dsparb & 0x1ff;
- bsize = (dsparb >> DSPARB_BEND_SHIFT) & 0x1ff;
- }
- DRM_DEBUG("FIFO size - A: %d, B: %d\n", asize, bsize);
+ /* Grab a couple of global values before we overwrite them */
+ total_size = planea_params.fifo_size;
+ cacheline_size = planea_params.cacheline_size;
- /* Two extra entries for padding */
- awm = asize - (planea_entries + 2);
- bwm = bsize - (planeb_entries + 2);
+ /* Update per-plane FIFO sizes */
+ planea_params.fifo_size = intel_get_fifo_size(dev, 0);
+ planeb_params.fifo_size = intel_get_fifo_size(dev, 1);
- /* Sanity check against potentially bad FIFO allocations */
- if (awm <= 0) {
- /* pipe is on but has too few FIFO entries */
- if (planea_entries != 0)
- DRM_DEBUG("plane A needs more FIFO entries\n");
- awm = 1;
- }
- if (bwm <= 0) {
- if (planeb_entries != 0)
- DRM_DEBUG("plane B needs more FIFO entries\n");
- bwm = 1;
- }
+ planea_wm = intel_calculate_wm(planea_clock, &planea_params,
+ pixel_size, latency_ns);
+ planeb_wm = intel_calculate_wm(planeb_clock, &planeb_params,
+ pixel_size, latency_ns);
+ DRM_DEBUG("FIFO watermarks - A: %d, B: %d\n", planea_wm, planeb_wm);
/*
* Overlay gets an aggressive default since video jitter is bad.
*/
cwm = 2;
- /* Calc sr entries for one pipe configs */
- if (!planea_clock || !planeb_clock) {
+ /* Calc sr entries for one plane configs */
+ if (sr_hdisplay && (!planea_clock || !planeb_clock)) {
+ /* self-refresh has much higher latency */
+ const static int sr_latency_ns = 6000;
+
sr_clock = planea_clock ? planea_clock : planeb_clock;
- line_time_us = (sr_hdisplay * 1000) / sr_clock;
- sr_entries = (((latency_ns / line_time_us) + 1) * pixel_size *
- sr_hdisplay) / 1000;
- sr_entries = roundup(sr_entries / wm_params->cacheline_size, 1);
- if (sr_entries < wm_params->fifo_size)
- srwm = wm_params->fifo_size - sr_entries;
+ line_time_us = ((sr_hdisplay * 1000) / sr_clock);
+
+ /* Use ns/us then divide to preserve precision */
+ sr_entries = (((sr_latency_ns / line_time_us) + 1) *
+ pixel_size * sr_hdisplay) / 1000;
+ sr_entries = roundup(sr_entries / cacheline_size, 1);
+ DRM_DEBUG("self-refresh entries: %d\n", sr_entries);
+ srwm = total_size - sr_entries;
+ if (srwm < 0)
+ srwm = 1;
+ if (IS_I9XX(dev))
+ I915_WRITE(FW_BLC_SELF, (srwm & 0x3f));
}
DRM_DEBUG("Setting FIFO watermarks - A: %d, B: %d, C: %d, SR %d\n",
- awm, bwm, cwm, srwm);
+ planea_wm, planeb_wm, cwm, srwm);
- fwater_lo = fwater_lo | ((bwm & 0x3f) << 16) | (awm & 0x3f);
- fwater_hi = fwater_hi | (cwm & 0x1f);
+ fwater_lo = ((planeb_wm & 0x3f) << 16) | (planea_wm & 0x3f);
+ fwater_hi = (cwm & 0x1f);
+
+ /* Set request length to 8 cachelines per fetch */
+ fwater_lo = fwater_lo | (1 << 24) | (1 << 8);
+ fwater_hi = fwater_hi | (1 << 8);
I915_WRITE(FW_BLC, fwater_lo);
I915_WRITE(FW_BLC2, fwater_hi);
- if (IS_I9XX(dev))
- I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN | (srwm & 0x3f));
}
static void i830_update_wm(struct drm_device *dev, int planea_clock,
int pixel_size)
{
struct drm_i915_private *dev_priv = dev->dev_private;
- uint32_t dsparb = I915_READ(DSPARB);
- uint32_t fwater_lo = I915_READ(FW_BLC) & MM_FIFO_WATERMARK;
- unsigned int asize, awm;
- int planea_entries;
-
- planea_entries = intel_calculate_wm(planea_clock, &i830_wm_info,
- pixel_size, latency_ns);
+ uint32_t fwater_lo = I915_READ(FW_BLC) & ~0xfff;
+ int planea_wm;
- asize = dsparb & 0x7f;
+ i830_wm_info.fifo_size = intel_get_fifo_size(dev, 0);
- awm = asize - planea_entries;
+ planea_wm = intel_calculate_wm(planea_clock, &i830_wm_info,
+ pixel_size, latency_ns);
+ fwater_lo |= (3<<8) | planea_wm;
- fwater_lo = fwater_lo | awm;
+ DRM_DEBUG("Setting FIFO watermarks - A: %d\n", planea_wm);
I915_WRITE(FW_BLC, fwater_lo);
}
@@ -1984,7 +2210,7 @@ static void intel_update_watermarks(struct drm_device *dev)
if (enabled <= 0)
return;
- /* Single pipe configs can enable self refresh */
+ /* Single plane configs can enable self refresh */
if (enabled == 1 && IS_IGD(dev))
igd_enable_cxsr(dev, sr_clock, pixel_size);
else if (IS_IGD(dev))
@@ -2028,6 +2254,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
u32 dpll = 0, fp = 0, dspcntr, pipeconf;
bool ok, is_sdvo = false, is_dvo = false;
bool is_crt = false, is_lvds = false, is_tv = false, is_dp = false;
+ bool is_edp = false;
struct drm_mode_config *mode_config = &dev->mode_config;
struct drm_connector *connector;
const intel_limit_t *limit;
@@ -2043,6 +2270,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
int lvds_reg = LVDS;
u32 temp;
int sdvo_pixel_multiply;
+ int target_clock;
drm_vblank_pre_modeset(dev, pipe);
@@ -2074,6 +2302,9 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
case INTEL_OUTPUT_DISPLAYPORT:
is_dp = true;
break;
+ case INTEL_OUTPUT_EDP:
+ is_edp = true;
+ break;
}
num_outputs++;
@@ -2125,11 +2356,29 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
}
/* FDI link */
- if (IS_IGDNG(dev))
- igdng_compute_m_n(3, 4, /* lane num 4 */
- adjusted_mode->clock,
- 270000, /* lane clock */
- &m_n);
+ if (IS_IGDNG(dev)) {
+ int lane, link_bw;
+ /* eDP doesn't require FDI link, so just set DP M/N
+ according to current link config */
+ if (is_edp) {
+ struct drm_connector *edp;
+ target_clock = mode->clock;
+ edp = intel_pipe_get_output(crtc);
+ intel_edp_link_config(to_intel_output(edp),
+ &lane, &link_bw);
+ } else {
+ /* DP over FDI requires target mode clock
+ instead of link clock */
+ if (is_dp)
+ target_clock = mode->clock;
+ else
+ target_clock = adjusted_mode->clock;
+ lane = 4;
+ link_bw = 270000;
+ }
+ igdng_compute_m_n(3, lane, target_clock,
+ link_bw, &m_n);
+ }
if (IS_IGD(dev))
fp = (1 << clock.n) << 16 | clock.m1 << 8 | clock.m2;
@@ -2250,29 +2499,15 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
dpll_reg = pch_dpll_reg;
}
- if (dpll & DPLL_VCO_ENABLE) {
+ if (is_edp) {
+ igdng_disable_pll_edp(crtc);
+ } else if ((dpll & DPLL_VCO_ENABLE)) {
I915_WRITE(fp_reg, fp);
I915_WRITE(dpll_reg, dpll & ~DPLL_VCO_ENABLE);
I915_READ(dpll_reg);
udelay(150);
}
- if (IS_IGDNG(dev)) {
- /* enable PCH clock reference source */
- /* XXX need to change the setting for other outputs */
- u32 temp;
- temp = I915_READ(PCH_DREF_CONTROL);
- temp &= ~DREF_NONSPREAD_SOURCE_MASK;
- temp |= DREF_NONSPREAD_CK505_ENABLE;
- temp &= ~DREF_SSC_SOURCE_MASK;
- temp |= DREF_SSC_SOURCE_ENABLE;
- temp &= ~DREF_SSC1_ENABLE;
- /* if no eDP, disable source output to CPU */
- temp &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
- temp |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
- I915_WRITE(PCH_DREF_CONTROL, temp);
- }
-
/* The LVDS pin pair needs to be on before the DPLLs are enabled.
* This is an exception to the general rule that mode_set doesn't turn
* things on.
@@ -2304,23 +2539,25 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
if (is_dp)
intel_dp_set_m_n(crtc, mode, adjusted_mode);
- I915_WRITE(fp_reg, fp);
- I915_WRITE(dpll_reg, dpll);
- I915_READ(dpll_reg);
- /* Wait for the clocks to stabilize. */
- udelay(150);
-
- if (IS_I965G(dev) && !IS_IGDNG(dev)) {
- sdvo_pixel_multiply = adjusted_mode->clock / mode->clock;
- I915_WRITE(dpll_md_reg, (0 << DPLL_MD_UDI_DIVIDER_SHIFT) |
- ((sdvo_pixel_multiply - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT));
- } else {
- /* write it again -- the BIOS does, after all */
+ if (!is_edp) {
+ I915_WRITE(fp_reg, fp);
I915_WRITE(dpll_reg, dpll);
+ I915_READ(dpll_reg);
+ /* Wait for the clocks to stabilize. */
+ udelay(150);
+
+ if (IS_I965G(dev) && !IS_IGDNG(dev)) {
+ sdvo_pixel_multiply = adjusted_mode->clock / mode->clock;
+ I915_WRITE(dpll_md_reg, (0 << DPLL_MD_UDI_DIVIDER_SHIFT) |
+ ((sdvo_pixel_multiply - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT));
+ } else {
+ /* write it again -- the BIOS does, after all */
+ I915_WRITE(dpll_reg, dpll);
+ }
+ I915_READ(dpll_reg);
+ /* Wait for the clocks to stabilize. */
+ udelay(150);
}
- I915_READ(dpll_reg);
- /* Wait for the clocks to stabilize. */
- udelay(150);
I915_WRITE(htot_reg, (adjusted_mode->crtc_hdisplay - 1) |
((adjusted_mode->crtc_htotal - 1) << 16));
@@ -2350,10 +2587,14 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
I915_WRITE(link_m1_reg, m_n.link_m);
I915_WRITE(link_n1_reg, m_n.link_n);
- /* enable FDI RX PLL too */
- temp = I915_READ(fdi_rx_reg);
- I915_WRITE(fdi_rx_reg, temp | FDI_RX_PLL_ENABLE);
- udelay(200);
+ if (is_edp) {
+ igdng_set_pll_edp(crtc, adjusted_mode->clock);
+ } else {
+ /* enable FDI RX PLL too */
+ temp = I915_READ(fdi_rx_reg);
+ I915_WRITE(fdi_rx_reg, temp | FDI_RX_PLL_ENABLE);
+ udelay(200);
+ }
}
I915_WRITE(pipeconf_reg, pipeconf);
@@ -2951,12 +3192,17 @@ static void intel_setup_outputs(struct drm_device *dev)
if (IS_IGDNG(dev)) {
int found;
+ if (IS_MOBILE(dev) && (I915_READ(DP_A) & DP_DETECTED))
+ intel_dp_init(dev, DP_A);
+
if (I915_READ(HDMIB) & PORT_DETECTED) {
/* check SDVOB */
/* found = intel_sdvo_init(dev, HDMIB); */
found = 0;
if (!found)
intel_hdmi_init(dev, HDMIB);
+ if (!found && (I915_READ(PCH_DP_B) & DP_DETECTED))
+ intel_dp_init(dev, PCH_DP_B);
}
if (I915_READ(HDMIC) & PORT_DETECTED)
@@ -2965,6 +3211,12 @@ static void intel_setup_outputs(struct drm_device *dev)
if (I915_READ(HDMID) & PORT_DETECTED)
intel_hdmi_init(dev, HDMID);
+ if (I915_READ(PCH_DP_C) & DP_DETECTED)
+ intel_dp_init(dev, PCH_DP_C);
+
+ if (I915_READ(PCH_DP_D) & DP_DETECTED)
+ intel_dp_init(dev, PCH_DP_D);
+
} else if (IS_I9XX(dev)) {
int found;
u32 reg;
@@ -3039,6 +3291,10 @@ static void intel_setup_outputs(struct drm_device *dev)
(1 << 1));
clone_mask = (1 << INTEL_OUTPUT_DISPLAYPORT);
break;
+ case INTEL_OUTPUT_EDP:
+ crtc_mask = (1 << 1);
+ clone_mask = (1 << INTEL_OUTPUT_EDP);
+ break;
}
encoder->possible_crtcs = crtc_mask;
encoder->possible_clones = intel_connector_clones(dev, clone_mask);
@@ -3148,6 +3404,9 @@ void intel_modeset_init(struct drm_device *dev)
if (IS_I965G(dev)) {
dev->mode_config.max_width = 8192;
dev->mode_config.max_height = 8192;
+ } else if (IS_I9XX(dev)) {
+ dev->mode_config.max_width = 4096;
+ dev->mode_config.max_height = 4096;
} else {
dev->mode_config.max_width = 2048;
dev->mode_config.max_height = 2048;
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 6770ae88370..a6ff15ac548 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -40,6 +40,8 @@
#define DP_LINK_CONFIGURATION_SIZE 9
+#define IS_eDP(i) ((i)->type == INTEL_OUTPUT_EDP)
+
struct intel_dp_priv {
uint32_t output_reg;
uint32_t DP;
@@ -63,6 +65,19 @@ intel_dp_link_train(struct intel_output *intel_output, uint32_t DP,
static void
intel_dp_link_down(struct intel_output *intel_output, uint32_t DP);
+void
+intel_edp_link_config (struct intel_output *intel_output,
+ int *lane_num, int *link_bw)
+{
+ struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+
+ *lane_num = dp_priv->lane_count;
+ if (dp_priv->link_bw == DP_LINK_BW_1_62)
+ *link_bw = 162000;
+ else if (dp_priv->link_bw == DP_LINK_BW_2_7)
+ *link_bw = 270000;
+}
+
static int
intel_dp_max_lane_count(struct intel_output *intel_output)
{
@@ -206,7 +221,13 @@ intel_dp_aux_ch(struct intel_output *intel_output,
* and would like to run at 2MHz. So, take the
* hrawclk value and divide by 2 and use that
*/
- aux_clock_divider = intel_hrawclk(dev) / 2;
+ if (IS_eDP(intel_output))
+ aux_clock_divider = 225; /* eDP input clock at 450Mhz */
+ else if (IS_IGDNG(dev))
+ aux_clock_divider = 62; /* IGDNG: input clock fixed at 125Mhz */
+ else
+ aux_clock_divider = intel_hrawclk(dev) / 2;
+
/* Must try at least 3 times according to DP spec */
for (try = 0; try < 5; try++) {
/* Load the send data into the aux channel data registers */
@@ -236,7 +257,7 @@ intel_dp_aux_ch(struct intel_output *intel_output,
}
/* Clear done status and any errors */
- I915_WRITE(ch_ctl, (ctl |
+ I915_WRITE(ch_ctl, (status |
DP_AUX_CH_CTL_DONE |
DP_AUX_CH_CTL_TIME_OUT_ERROR |
DP_AUX_CH_CTL_RECEIVE_ERROR));
@@ -295,7 +316,7 @@ intel_dp_aux_native_write(struct intel_output *intel_output,
return -1;
msg[0] = AUX_NATIVE_WRITE << 4;
msg[1] = address >> 8;
- msg[2] = address;
+ msg[2] = address & 0xff;
msg[3] = send_bytes - 1;
memcpy(&msg[4], send, send_bytes);
msg_bytes = send_bytes + 4;
@@ -387,8 +408,8 @@ intel_dp_i2c_init(struct intel_output *intel_output, const char *name)
memset(&dp_priv->adapter, '\0', sizeof (dp_priv->adapter));
dp_priv->adapter.owner = THIS_MODULE;
dp_priv->adapter.class = I2C_CLASS_DDC;
- strncpy (dp_priv->adapter.name, name, sizeof dp_priv->adapter.name - 1);
- dp_priv->adapter.name[sizeof dp_priv->adapter.name - 1] = '\0';
+ strncpy (dp_priv->adapter.name, name, sizeof(dp_priv->adapter.name) - 1);
+ dp_priv->adapter.name[sizeof(dp_priv->adapter.name) - 1] = '\0';
dp_priv->adapter.algo_data = &dp_priv->algo;
dp_priv->adapter.dev.parent = &intel_output->base.kdev;
@@ -493,22 +514,40 @@ intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode,
intel_dp_compute_m_n(3, lane_count,
mode->clock, adjusted_mode->clock, &m_n);
- if (intel_crtc->pipe == 0) {
- I915_WRITE(PIPEA_GMCH_DATA_M,
- ((m_n.tu - 1) << PIPE_GMCH_DATA_M_TU_SIZE_SHIFT) |
- m_n.gmch_m);
- I915_WRITE(PIPEA_GMCH_DATA_N,
- m_n.gmch_n);
- I915_WRITE(PIPEA_DP_LINK_M, m_n.link_m);
- I915_WRITE(PIPEA_DP_LINK_N, m_n.link_n);
+ if (IS_IGDNG(dev)) {
+ if (intel_crtc->pipe == 0) {
+ I915_WRITE(TRANSA_DATA_M1,
+ ((m_n.tu - 1) << PIPE_GMCH_DATA_M_TU_SIZE_SHIFT) |
+ m_n.gmch_m);
+ I915_WRITE(TRANSA_DATA_N1, m_n.gmch_n);
+ I915_WRITE(TRANSA_DP_LINK_M1, m_n.link_m);
+ I915_WRITE(TRANSA_DP_LINK_N1, m_n.link_n);
+ } else {
+ I915_WRITE(TRANSB_DATA_M1,
+ ((m_n.tu - 1) << PIPE_GMCH_DATA_M_TU_SIZE_SHIFT) |
+ m_n.gmch_m);
+ I915_WRITE(TRANSB_DATA_N1, m_n.gmch_n);
+ I915_WRITE(TRANSB_DP_LINK_M1, m_n.link_m);
+ I915_WRITE(TRANSB_DP_LINK_N1, m_n.link_n);
+ }
} else {
- I915_WRITE(PIPEB_GMCH_DATA_M,
- ((m_n.tu - 1) << PIPE_GMCH_DATA_M_TU_SIZE_SHIFT) |
- m_n.gmch_m);
- I915_WRITE(PIPEB_GMCH_DATA_N,
- m_n.gmch_n);
- I915_WRITE(PIPEB_DP_LINK_M, m_n.link_m);
- I915_WRITE(PIPEB_DP_LINK_N, m_n.link_n);
+ if (intel_crtc->pipe == 0) {
+ I915_WRITE(PIPEA_GMCH_DATA_M,
+ ((m_n.tu - 1) << PIPE_GMCH_DATA_M_TU_SIZE_SHIFT) |
+ m_n.gmch_m);
+ I915_WRITE(PIPEA_GMCH_DATA_N,
+ m_n.gmch_n);
+ I915_WRITE(PIPEA_DP_LINK_M, m_n.link_m);
+ I915_WRITE(PIPEA_DP_LINK_N, m_n.link_n);
+ } else {
+ I915_WRITE(PIPEB_GMCH_DATA_M,
+ ((m_n.tu - 1) << PIPE_GMCH_DATA_M_TU_SIZE_SHIFT) |
+ m_n.gmch_m);
+ I915_WRITE(PIPEB_GMCH_DATA_N,
+ m_n.gmch_n);
+ I915_WRITE(PIPEB_DP_LINK_M, m_n.link_m);
+ I915_WRITE(PIPEB_DP_LINK_N, m_n.link_n);
+ }
}
}
@@ -556,8 +595,38 @@ intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode,
if (intel_crtc->pipe == 1)
dp_priv->DP |= DP_PIPEB_SELECT;
+
+ if (IS_eDP(intel_output)) {
+ /* don't miss out required setting for eDP */
+ dp_priv->DP |= DP_PLL_ENABLE;
+ if (adjusted_mode->clock < 200000)
+ dp_priv->DP |= DP_PLL_FREQ_160MHZ;
+ else
+ dp_priv->DP |= DP_PLL_FREQ_270MHZ;
+ }
}
+static void igdng_edp_backlight_on (struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ u32 pp;
+
+ DRM_DEBUG("\n");
+ pp = I915_READ(PCH_PP_CONTROL);
+ pp |= EDP_BLC_ENABLE;
+ I915_WRITE(PCH_PP_CONTROL, pp);
+}
+
+static void igdng_edp_backlight_off (struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ u32 pp;
+
+ DRM_DEBUG("\n");
+ pp = I915_READ(PCH_PP_CONTROL);
+ pp &= ~EDP_BLC_ENABLE;
+ I915_WRITE(PCH_PP_CONTROL, pp);
+}
static void
intel_dp_dpms(struct drm_encoder *encoder, int mode)
@@ -569,11 +638,17 @@ intel_dp_dpms(struct drm_encoder *encoder, int mode)
uint32_t dp_reg = I915_READ(dp_priv->output_reg);
if (mode != DRM_MODE_DPMS_ON) {
- if (dp_reg & DP_PORT_EN)
+ if (dp_reg & DP_PORT_EN) {
intel_dp_link_down(intel_output, dp_priv->DP);
+ if (IS_eDP(intel_output))
+ igdng_edp_backlight_off(dev);
+ }
} else {
- if (!(dp_reg & DP_PORT_EN))
+ if (!(dp_reg & DP_PORT_EN)) {
intel_dp_link_train(intel_output, dp_priv->DP, dp_priv->link_configuration);
+ if (IS_eDP(intel_output))
+ igdng_edp_backlight_on(dev);
+ }
}
dp_priv->dpms_mode = mode;
}
@@ -935,6 +1010,23 @@ intel_dp_link_down(struct intel_output *intel_output, uint32_t DP)
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+ DRM_DEBUG("\n");
+
+ if (IS_eDP(intel_output)) {
+ DP &= ~DP_PLL_ENABLE;
+ I915_WRITE(dp_priv->output_reg, DP);
+ POSTING_READ(dp_priv->output_reg);
+ udelay(100);
+ }
+
+ DP &= ~DP_LINK_TRAIN_MASK;
+ I915_WRITE(dp_priv->output_reg, DP | DP_LINK_TRAIN_PAT_IDLE);
+ POSTING_READ(dp_priv->output_reg);
+
+ udelay(17000);
+
+ if (IS_eDP(intel_output))
+ DP |= DP_LINK_TRAIN_OFF;
I915_WRITE(dp_priv->output_reg, DP & ~DP_PORT_EN);
POSTING_READ(dp_priv->output_reg);
}
@@ -978,6 +1070,24 @@ intel_dp_check_link_status(struct intel_output *intel_output)
intel_dp_link_train(intel_output, dp_priv->DP, dp_priv->link_configuration);
}
+static enum drm_connector_status
+igdng_dp_detect(struct drm_connector *connector)
+{
+ struct intel_output *intel_output = to_intel_output(connector);
+ struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+ enum drm_connector_status status;
+
+ status = connector_status_disconnected;
+ if (intel_dp_aux_native_read(intel_output,
+ 0x000, dp_priv->dpcd,
+ sizeof (dp_priv->dpcd)) == sizeof (dp_priv->dpcd))
+ {
+ if (dp_priv->dpcd[0] != 0)
+ status = connector_status_connected;
+ }
+ return status;
+}
+
/**
* Uses CRT_HOTPLUG_EN and CRT_HOTPLUG_STAT to detect DP connection.
*
@@ -996,6 +1106,9 @@ intel_dp_detect(struct drm_connector *connector)
dp_priv->has_audio = false;
+ if (IS_IGDNG(dev))
+ return igdng_dp_detect(connector);
+
temp = I915_READ(PORT_HOTPLUG_EN);
I915_WRITE(PORT_HOTPLUG_EN,
@@ -1039,11 +1152,27 @@ intel_dp_detect(struct drm_connector *connector)
static int intel_dp_get_modes(struct drm_connector *connector)
{
struct intel_output *intel_output = to_intel_output(connector);
+ struct drm_device *dev = intel_output->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ int ret;
/* We should parse the EDID data and find out if it has an audio sink
*/
- return intel_ddc_get_modes(intel_output);
+ ret = intel_ddc_get_modes(intel_output);
+ if (ret)
+ return ret;
+
+ /* if eDP has no EDID, try to use fixed panel mode from VBT */
+ if (IS_eDP(intel_output)) {
+ if (dev_priv->panel_fixed_mode != NULL) {
+ struct drm_display_mode *mode;
+ mode = drm_mode_duplicate(dev, dev_priv->panel_fixed_mode);
+ drm_mode_probed_add(connector, mode);
+ return 1;
+ }
+ }
+ return 0;
}
static void
@@ -1106,6 +1235,7 @@ intel_dp_init(struct drm_device *dev, int output_reg)
struct drm_connector *connector;
struct intel_output *intel_output;
struct intel_dp_priv *dp_priv;
+ const char *name = NULL;
intel_output = kcalloc(sizeof(struct intel_output) +
sizeof(struct intel_dp_priv), 1, GFP_KERNEL);
@@ -1119,7 +1249,10 @@ intel_dp_init(struct drm_device *dev, int output_reg)
DRM_MODE_CONNECTOR_DisplayPort);
drm_connector_helper_add(connector, &intel_dp_connector_helper_funcs);
- intel_output->type = INTEL_OUTPUT_DISPLAYPORT;
+ if (output_reg == DP_A)
+ intel_output->type = INTEL_OUTPUT_EDP;
+ else
+ intel_output->type = INTEL_OUTPUT_DISPLAYPORT;
connector->interlace_allowed = true;
connector->doublescan_allowed = 0;
@@ -1139,12 +1272,41 @@ intel_dp_init(struct drm_device *dev, int output_reg)
drm_sysfs_connector_add(connector);
/* Set up the DDC bus. */
- intel_dp_i2c_init(intel_output,
- (output_reg == DP_B) ? "DPDDC-B" :
- (output_reg == DP_C) ? "DPDDC-C" : "DPDDC-D");
+ switch (output_reg) {
+ case DP_A:
+ name = "DPDDC-A";
+ break;
+ case DP_B:
+ case PCH_DP_B:
+ name = "DPDDC-B";
+ break;
+ case DP_C:
+ case PCH_DP_C:
+ name = "DPDDC-C";
+ break;
+ case DP_D:
+ case PCH_DP_D:
+ name = "DPDDC-D";
+ break;
+ }
+
+ intel_dp_i2c_init(intel_output, name);
+
intel_output->ddc_bus = &dp_priv->adapter;
intel_output->hot_plug = intel_dp_hot_plug;
+ if (output_reg == DP_A) {
+ /* initialize panel mode from VBT if available for eDP */
+ if (dev_priv->lfp_lvds_vbt_mode) {
+ dev_priv->panel_fixed_mode =
+ drm_mode_duplicate(dev, dev_priv->lfp_lvds_vbt_mode);
+ if (dev_priv->panel_fixed_mode) {
+ dev_priv->panel_fixed_mode->type |=
+ DRM_MODE_TYPE_PREFERRED;
+ }
+ }
+ }
+
/* For G4X desktop chip, PEG_BAND_GAP_DATA 3:0 must first be written
* 0xd. Failure to do so will result in spurious interrupts being
* generated on the port when a cable is not attached.
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 004541c935a..d6f92ea1b55 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -55,6 +55,7 @@
#define INTEL_OUTPUT_TVOUT 5
#define INTEL_OUTPUT_HDMI 6
#define INTEL_OUTPUT_DISPLAYPORT 7
+#define INTEL_OUTPUT_EDP 8
#define INTEL_DVO_CHIP_NONE 0
#define INTEL_DVO_CHIP_LVDS 1
@@ -121,6 +122,8 @@ extern void intel_dp_init(struct drm_device *dev, int dp_reg);
void
intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode);
+extern void intel_edp_link_config (struct intel_output *, int *, int *);
+
extern void intel_crtc_load_lut(struct drm_crtc *crtc);
extern void intel_encoder_prepare (struct drm_encoder *encoder);
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index 9e30daae37d..1842290cded 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -130,16 +130,17 @@ static bool intel_hdmi_mode_fixup(struct drm_encoder *encoder,
}
static enum drm_connector_status
-intel_hdmi_edid_detect(struct drm_connector *connector)
+intel_hdmi_detect(struct drm_connector *connector)
{
struct intel_output *intel_output = to_intel_output(connector);
struct intel_hdmi_priv *hdmi_priv = intel_output->dev_priv;
struct edid *edid = NULL;
enum drm_connector_status status = connector_status_disconnected;
+ hdmi_priv->has_hdmi_sink = false;
edid = drm_get_edid(&intel_output->base,
intel_output->ddc_bus);
- hdmi_priv->has_hdmi_sink = false;
+
if (edid) {
if (edid->input & DRM_EDID_INPUT_DIGITAL) {
status = connector_status_connected;
@@ -148,65 +149,8 @@ intel_hdmi_edid_detect(struct drm_connector *connector)
intel_output->base.display_info.raw_edid = NULL;
kfree(edid);
}
- return status;
-}
-
-static enum drm_connector_status
-igdng_hdmi_detect(struct drm_connector *connector)
-{
- struct intel_output *intel_output = to_intel_output(connector);
- struct intel_hdmi_priv *hdmi_priv = intel_output->dev_priv;
-
- /* FIXME hotplug detect */
-
- hdmi_priv->has_hdmi_sink = false;
- return intel_hdmi_edid_detect(connector);
-}
-static enum drm_connector_status
-intel_hdmi_detect(struct drm_connector *connector)
-{
- struct drm_device *dev = connector->dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_output *intel_output = to_intel_output(connector);
- struct intel_hdmi_priv *hdmi_priv = intel_output->dev_priv;
- u32 temp, bit;
-
- if (IS_IGDNG(dev))
- return igdng_hdmi_detect(connector);
-
- temp = I915_READ(PORT_HOTPLUG_EN);
-
- switch (hdmi_priv->sdvox_reg) {
- case SDVOB:
- temp |= HDMIB_HOTPLUG_INT_EN;
- break;
- case SDVOC:
- temp |= HDMIC_HOTPLUG_INT_EN;
- break;
- default:
- return connector_status_unknown;
- }
-
- I915_WRITE(PORT_HOTPLUG_EN, temp);
-
- POSTING_READ(PORT_HOTPLUG_EN);
-
- switch (hdmi_priv->sdvox_reg) {
- case SDVOB:
- bit = HDMIB_HOTPLUG_INT_STATUS;
- break;
- case SDVOC:
- bit = HDMIC_HOTPLUG_INT_STATUS;
- break;
- default:
- return connector_status_unknown;
- }
-
- if ((I915_READ(PORT_HOTPLUG_STAT) & bit) != 0)
- return intel_hdmi_edid_detect(connector);
- else
- return connector_status_disconnected;
+ return status;
}
static int intel_hdmi_get_modes(struct drm_connector *connector)
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index 9ab38efffec..3f445a80c55 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -780,6 +780,14 @@ static const struct dmi_system_id intel_no_lvds[] = {
},
{
.callback = intel_no_lvds_dmi_callback,
+ .ident = "AOpen Mini PC MP915",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "AOpen"),
+ DMI_MATCH(DMI_BOARD_NAME, "i915GMx-F"),
+ },
+ },
+ {
+ .callback = intel_no_lvds_dmi_callback,
.ident = "Aopen i945GTt-VFA",
.matches = {
DMI_MATCH(DMI_PRODUCT_VERSION, "AO00001JW"),
@@ -884,6 +892,10 @@ void intel_lvds_init(struct drm_device *dev)
if (IS_IGDNG(dev)) {
if ((I915_READ(PCH_LVDS) & LVDS_DETECTED) == 0)
return;
+ if (dev_priv->edp_support) {
+ DRM_DEBUG("disable LVDS for eDP support\n");
+ return;
+ }
gpio = PCH_GPIOC;
}
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index 4f0c30948bc..5371d933255 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -31,6 +31,7 @@
#include "drm.h"
#include "drm_crtc.h"
#include "intel_drv.h"
+#include "drm_edid.h"
#include "i915_drm.h"
#include "i915_drv.h"
#include "intel_sdvo_regs.h"
@@ -55,6 +56,12 @@ struct intel_sdvo_priv {
/* Pixel clock limitations reported by the SDVO device, in kHz */
int pixel_clock_min, pixel_clock_max;
+ /*
+ * For multiple function SDVO device,
+ * this is for current attached outputs.
+ */
+ uint16_t attached_output;
+
/**
* This is set if we're going to treat the device as TV-out.
*
@@ -114,6 +121,9 @@ struct intel_sdvo_priv {
u32 save_SDVOX;
};
+static bool
+intel_sdvo_output_setup(struct intel_output *intel_output, uint16_t flags);
+
/**
* Writes the SDVOB or SDVOC with the given value, but always writes both
* SDVOB and SDVOC to work around apparent hardware issues (according to
@@ -1435,41 +1445,96 @@ void intel_sdvo_set_hotplug(struct drm_connector *connector, int on)
intel_sdvo_read_response(intel_output, &response, 2);
}
-static void
-intel_sdvo_hdmi_sink_detect(struct drm_connector *connector)
+static bool
+intel_sdvo_multifunc_encoder(struct intel_output *intel_output)
+{
+ struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
+ int caps = 0;
+
+ if (sdvo_priv->caps.output_flags &
+ (SDVO_OUTPUT_TMDS0 | SDVO_OUTPUT_TMDS1))
+ caps++;
+ if (sdvo_priv->caps.output_flags &
+ (SDVO_OUTPUT_RGB0 | SDVO_OUTPUT_RGB1))
+ caps++;
+ if (sdvo_priv->caps.output_flags &
+ (SDVO_OUTPUT_SVID0 | SDVO_OUTPUT_SVID0))
+ caps++;
+ if (sdvo_priv->caps.output_flags &
+ (SDVO_OUTPUT_CVBS0 | SDVO_OUTPUT_CVBS1))
+ caps++;
+ if (sdvo_priv->caps.output_flags &
+ (SDVO_OUTPUT_YPRPB0 | SDVO_OUTPUT_YPRPB1))
+ caps++;
+
+ if (sdvo_priv->caps.output_flags &
+ (SDVO_OUTPUT_SCART0 | SDVO_OUTPUT_SCART1))
+ caps++;
+
+ if (sdvo_priv->caps.output_flags &
+ (SDVO_OUTPUT_LVDS0 | SDVO_OUTPUT_LVDS1))
+ caps++;
+
+ return (caps > 1);
+}
+
+enum drm_connector_status
+intel_sdvo_hdmi_sink_detect(struct drm_connector *connector, u16 response)
{
struct intel_output *intel_output = to_intel_output(connector);
struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
+ enum drm_connector_status status = connector_status_connected;
struct edid *edid = NULL;
edid = drm_get_edid(&intel_output->base,
intel_output->ddc_bus);
if (edid != NULL) {
- sdvo_priv->is_hdmi = drm_detect_hdmi_monitor(edid);
+ /* Don't report the output as connected if it's a DVI-I
+ * connector with a non-digital EDID coming out.
+ */
+ if (response & (SDVO_OUTPUT_TMDS0 | SDVO_OUTPUT_TMDS1)) {
+ if (edid->input & DRM_EDID_INPUT_DIGITAL)
+ sdvo_priv->is_hdmi =
+ drm_detect_hdmi_monitor(edid);
+ else
+ status = connector_status_disconnected;
+ }
+
kfree(edid);
intel_output->base.display_info.raw_edid = NULL;
- }
+
+ } else if (response & (SDVO_OUTPUT_TMDS0 | SDVO_OUTPUT_TMDS1))
+ status = connector_status_disconnected;
+
+ return status;
}
static enum drm_connector_status intel_sdvo_detect(struct drm_connector *connector)
{
- u8 response[2];
+ uint16_t response;
u8 status;
struct intel_output *intel_output = to_intel_output(connector);
+ struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
intel_sdvo_write_cmd(intel_output, SDVO_CMD_GET_ATTACHED_DISPLAYS, NULL, 0);
status = intel_sdvo_read_response(intel_output, &response, 2);
- DRM_DEBUG("SDVO response %d %d\n", response[0], response[1]);
+ DRM_DEBUG("SDVO response %d %d\n", response & 0xff, response >> 8);
if (status != SDVO_CMD_STATUS_SUCCESS)
return connector_status_unknown;
- if ((response[0] != 0) || (response[1] != 0)) {
- intel_sdvo_hdmi_sink_detect(connector);
- return connector_status_connected;
- } else
+ if (response == 0)
return connector_status_disconnected;
+
+ if (intel_sdvo_multifunc_encoder(intel_output) &&
+ sdvo_priv->attached_output != response) {
+ if (sdvo_priv->controlled_output != response &&
+ intel_sdvo_output_setup(intel_output, response) != true)
+ return connector_status_unknown;
+ sdvo_priv->attached_output = response;
+ }
+ return intel_sdvo_hdmi_sink_detect(connector, response);
}
static void intel_sdvo_get_ddc_modes(struct drm_connector *connector)
@@ -1866,16 +1931,101 @@ intel_sdvo_get_slave_addr(struct drm_device *dev, int output_device)
return 0x72;
}
+static bool
+intel_sdvo_output_setup(struct intel_output *intel_output, uint16_t flags)
+{
+ struct drm_connector *connector = &intel_output->base;
+ struct drm_encoder *encoder = &intel_output->enc;
+ struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
+ bool ret = true, registered = false;
+
+ sdvo_priv->is_tv = false;
+ intel_output->needs_tv_clock = false;
+ sdvo_priv->is_lvds = false;
+
+ if (device_is_registered(&connector->kdev)) {
+ drm_sysfs_connector_remove(connector);
+ registered = true;
+ }
+
+ if (flags &
+ (SDVO_OUTPUT_TMDS0 | SDVO_OUTPUT_TMDS1)) {
+ if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_TMDS0)
+ sdvo_priv->controlled_output = SDVO_OUTPUT_TMDS0;
+ else
+ sdvo_priv->controlled_output = SDVO_OUTPUT_TMDS1;
+
+ encoder->encoder_type = DRM_MODE_ENCODER_TMDS;
+ connector->connector_type = DRM_MODE_CONNECTOR_DVID;
+
+ if (intel_sdvo_get_supp_encode(intel_output,
+ &sdvo_priv->encode) &&
+ intel_sdvo_get_digital_encoding_mode(intel_output) &&
+ sdvo_priv->is_hdmi) {
+ /* enable hdmi encoding mode if supported */
+ intel_sdvo_set_encode(intel_output, SDVO_ENCODE_HDMI);
+ intel_sdvo_set_colorimetry(intel_output,
+ SDVO_COLORIMETRY_RGB256);
+ connector->connector_type = DRM_MODE_CONNECTOR_HDMIA;
+ }
+ } else if (flags & SDVO_OUTPUT_SVID0) {
+
+ sdvo_priv->controlled_output = SDVO_OUTPUT_SVID0;
+ encoder->encoder_type = DRM_MODE_ENCODER_TVDAC;
+ connector->connector_type = DRM_MODE_CONNECTOR_SVIDEO;
+ sdvo_priv->is_tv = true;
+ intel_output->needs_tv_clock = true;
+ } else if (flags & SDVO_OUTPUT_RGB0) {
+
+ sdvo_priv->controlled_output = SDVO_OUTPUT_RGB0;
+ encoder->encoder_type = DRM_MODE_ENCODER_DAC;
+ connector->connector_type = DRM_MODE_CONNECTOR_VGA;
+ } else if (flags & SDVO_OUTPUT_RGB1) {
+
+ sdvo_priv->controlled_output = SDVO_OUTPUT_RGB1;
+ encoder->encoder_type = DRM_MODE_ENCODER_DAC;
+ connector->connector_type = DRM_MODE_CONNECTOR_VGA;
+ } else if (flags & SDVO_OUTPUT_LVDS0) {
+
+ sdvo_priv->controlled_output = SDVO_OUTPUT_LVDS0;
+ encoder->encoder_type = DRM_MODE_ENCODER_LVDS;
+ connector->connector_type = DRM_MODE_CONNECTOR_LVDS;
+ sdvo_priv->is_lvds = true;
+ } else if (flags & SDVO_OUTPUT_LVDS1) {
+
+ sdvo_priv->controlled_output = SDVO_OUTPUT_LVDS1;
+ encoder->encoder_type = DRM_MODE_ENCODER_LVDS;
+ connector->connector_type = DRM_MODE_CONNECTOR_LVDS;
+ sdvo_priv->is_lvds = true;
+ } else {
+
+ unsigned char bytes[2];
+
+ sdvo_priv->controlled_output = 0;
+ memcpy(bytes, &sdvo_priv->caps.output_flags, 2);
+ DRM_DEBUG_KMS(I915_SDVO,
+ "%s: Unknown SDVO output type (0x%02x%02x)\n",
+ SDVO_NAME(sdvo_priv),
+ bytes[0], bytes[1]);
+ ret = false;
+ }
+
+ if (ret && registered)
+ ret = drm_sysfs_connector_add(connector) == 0 ? true : false;
+
+
+ return ret;
+
+}
+
bool intel_sdvo_init(struct drm_device *dev, int output_device)
{
struct drm_connector *connector;
struct intel_output *intel_output;
struct intel_sdvo_priv *sdvo_priv;
- int connector_type;
u8 ch[0x40];
int i;
- int encoder_type;
intel_output = kcalloc(sizeof(struct intel_output)+sizeof(struct intel_sdvo_priv), 1, GFP_KERNEL);
if (!intel_output) {
@@ -1925,88 +2075,28 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device)
intel_output->ddc_bus->algo = &intel_sdvo_i2c_bit_algo;
/* In defaut case sdvo lvds is false */
- sdvo_priv->is_lvds = false;
intel_sdvo_get_capabilities(intel_output, &sdvo_priv->caps);
- if (sdvo_priv->caps.output_flags &
- (SDVO_OUTPUT_TMDS0 | SDVO_OUTPUT_TMDS1)) {
- if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_TMDS0)
- sdvo_priv->controlled_output = SDVO_OUTPUT_TMDS0;
- else
- sdvo_priv->controlled_output = SDVO_OUTPUT_TMDS1;
-
- encoder_type = DRM_MODE_ENCODER_TMDS;
- connector_type = DRM_MODE_CONNECTOR_DVID;
-
- if (intel_sdvo_get_supp_encode(intel_output,
- &sdvo_priv->encode) &&
- intel_sdvo_get_digital_encoding_mode(intel_output) &&
- sdvo_priv->is_hdmi) {
- /* enable hdmi encoding mode if supported */
- intel_sdvo_set_encode(intel_output, SDVO_ENCODE_HDMI);
- intel_sdvo_set_colorimetry(intel_output,
- SDVO_COLORIMETRY_RGB256);
- connector_type = DRM_MODE_CONNECTOR_HDMIA;
- }
- }
- else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_SVID0)
- {
- sdvo_priv->controlled_output = SDVO_OUTPUT_SVID0;
- encoder_type = DRM_MODE_ENCODER_TVDAC;
- connector_type = DRM_MODE_CONNECTOR_SVIDEO;
- sdvo_priv->is_tv = true;
- intel_output->needs_tv_clock = true;
- }
- else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_RGB0)
- {
- sdvo_priv->controlled_output = SDVO_OUTPUT_RGB0;
- encoder_type = DRM_MODE_ENCODER_DAC;
- connector_type = DRM_MODE_CONNECTOR_VGA;
- }
- else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_RGB1)
- {
- sdvo_priv->controlled_output = SDVO_OUTPUT_RGB1;
- encoder_type = DRM_MODE_ENCODER_DAC;
- connector_type = DRM_MODE_CONNECTOR_VGA;
- }
- else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_LVDS0)
- {
- sdvo_priv->controlled_output = SDVO_OUTPUT_LVDS0;
- encoder_type = DRM_MODE_ENCODER_LVDS;
- connector_type = DRM_MODE_CONNECTOR_LVDS;
- sdvo_priv->is_lvds = true;
- }
- else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_LVDS1)
- {
- sdvo_priv->controlled_output = SDVO_OUTPUT_LVDS1;
- encoder_type = DRM_MODE_ENCODER_LVDS;
- connector_type = DRM_MODE_CONNECTOR_LVDS;
- sdvo_priv->is_lvds = true;
- }
- else
- {
- unsigned char bytes[2];
-
- sdvo_priv->controlled_output = 0;
- memcpy (bytes, &sdvo_priv->caps.output_flags, 2);
- DRM_DEBUG_KMS(I915_SDVO,
- "%s: Unknown SDVO output type (0x%02x%02x)\n",
- SDVO_NAME(sdvo_priv),
- bytes[0], bytes[1]);
- encoder_type = DRM_MODE_ENCODER_NONE;
- connector_type = DRM_MODE_CONNECTOR_Unknown;
+ if (intel_sdvo_output_setup(intel_output,
+ sdvo_priv->caps.output_flags) != true) {
+ DRM_DEBUG("SDVO output failed to setup on SDVO%c\n",
+ output_device == SDVOB ? 'B' : 'C');
goto err_i2c;
}
+
connector = &intel_output->base;
drm_connector_init(dev, connector, &intel_sdvo_connector_funcs,
- connector_type);
+ connector->connector_type);
+
drm_connector_helper_add(connector, &intel_sdvo_connector_helper_funcs);
connector->interlace_allowed = 0;
connector->doublescan_allowed = 0;
connector->display_info.subpixel_order = SubPixelHorizontalRGB;
- drm_encoder_init(dev, &intel_output->enc, &intel_sdvo_enc_funcs, encoder_type);
+ drm_encoder_init(dev, &intel_output->enc,
+ &intel_sdvo_enc_funcs, intel_output->enc.encoder_type);
+
drm_encoder_helper_add(&intel_output->enc, &intel_sdvo_helper_funcs);
drm_mode_connector_attach_encoder(&intel_output->base, &intel_output->enc);
diff --git a/drivers/gpu/drm/i915/intel_tv.c b/drivers/gpu/drm/i915/intel_tv.c
index a43c98e3f07..da4ab4dc163 100644
--- a/drivers/gpu/drm/i915/intel_tv.c
+++ b/drivers/gpu/drm/i915/intel_tv.c
@@ -1490,6 +1490,27 @@ static struct input_res {
{"1920x1080", 1920, 1080},
};
+/*
+ * Chose preferred mode according to line number of TV format
+ */
+static void
+intel_tv_chose_preferred_modes(struct drm_connector *connector,
+ struct drm_display_mode *mode_ptr)
+{
+ struct intel_output *intel_output = to_intel_output(connector);
+ const struct tv_mode *tv_mode = intel_tv_mode_find(intel_output);
+
+ if (tv_mode->nbr_end < 480 && mode_ptr->vdisplay == 480)
+ mode_ptr->type |= DRM_MODE_TYPE_PREFERRED;
+ else if (tv_mode->nbr_end > 480) {
+ if (tv_mode->progressive == true && tv_mode->nbr_end < 720) {
+ if (mode_ptr->vdisplay == 720)
+ mode_ptr->type |= DRM_MODE_TYPE_PREFERRED;
+ } else if (mode_ptr->vdisplay == 1080)
+ mode_ptr->type |= DRM_MODE_TYPE_PREFERRED;
+ }
+}
+
/**
* Stub get_modes function.
*
@@ -1544,6 +1565,7 @@ intel_tv_get_modes(struct drm_connector *connector)
mode_ptr->clock = (int) tmp;
mode_ptr->type = DRM_MODE_TYPE_DRIVER;
+ intel_tv_chose_preferred_modes(connector, mode_ptr);
drm_mode_probed_add(connector, mode_ptr);
count++;
}
diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c
index 05a44896dff..f1ba8ff4113 100644
--- a/drivers/gpu/drm/radeon/r100.c
+++ b/drivers/gpu/drm/radeon/r100.c
@@ -722,13 +722,14 @@ int r100_cs_packet_parse(struct radeon_cs_parser *p,
unsigned idx)
{
struct radeon_cs_chunk *ib_chunk = &p->chunks[p->chunk_ib_idx];
- uint32_t header = ib_chunk->kdata[idx];
+ uint32_t header;
if (idx >= ib_chunk->length_dw) {
DRM_ERROR("Can not parse packet at %d after CS end %d !\n",
idx, ib_chunk->length_dw);
return -EINVAL;
}
+ header = ib_chunk->kdata[idx];
pkt->idx = idx;
pkt->type = CP_PACKET_GET_TYPE(header);
pkt->count = CP_PACKET_GET_COUNT(header);
diff --git a/drivers/gpu/drm/radeon/r600_cp.c b/drivers/gpu/drm/radeon/r600_cp.c
index 146f3570af8..20f17908b03 100644
--- a/drivers/gpu/drm/radeon/r600_cp.c
+++ b/drivers/gpu/drm/radeon/r600_cp.c
@@ -384,8 +384,9 @@ static void r600_cp_load_microcode(drm_radeon_private_t *dev_priv)
DRM_INFO("Loading RV670 PFP Microcode\n");
for (i = 0; i < PFP_UCODE_SIZE; i++)
RADEON_WRITE(R600_CP_PFP_UCODE_DATA, RV670_pfp_microcode[i]);
- } else if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS780)) {
- DRM_INFO("Loading RS780 CP Microcode\n");
+ } else if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS780) ||
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS880)) {
+ DRM_INFO("Loading RS780/RS880 CP Microcode\n");
for (i = 0; i < PM4_UCODE_SIZE; i++) {
RADEON_WRITE(R600_CP_ME_RAM_DATA,
RS780_cp_microcode[i][0]);
@@ -396,7 +397,7 @@ static void r600_cp_load_microcode(drm_radeon_private_t *dev_priv)
}
RADEON_WRITE(R600_CP_PFP_UCODE_ADDR, 0);
- DRM_INFO("Loading RS780 PFP Microcode\n");
+ DRM_INFO("Loading RS780/RS880 PFP Microcode\n");
for (i = 0; i < PFP_UCODE_SIZE; i++)
RADEON_WRITE(R600_CP_PFP_UCODE_DATA, RS780_pfp_microcode[i]);
}
@@ -783,6 +784,7 @@ static void r600_gfx_init(struct drm_device *dev,
break;
case CHIP_RV610:
case CHIP_RS780:
+ case CHIP_RS880:
case CHIP_RV620:
dev_priv->r600_max_pipes = 1;
dev_priv->r600_max_tile_pipes = 1;
@@ -917,7 +919,8 @@ static void r600_gfx_init(struct drm_device *dev,
((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV630) ||
((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV610) ||
((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV620) ||
- ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS780))
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS780) ||
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS880))
RADEON_WRITE(R600_DB_DEBUG, R600_PREZ_MUST_WAIT_FOR_POSTZ_DONE);
else
RADEON_WRITE(R600_DB_DEBUG, 0);
@@ -935,7 +938,8 @@ static void r600_gfx_init(struct drm_device *dev,
sq_ms_fifo_sizes = RADEON_READ(R600_SQ_MS_FIFO_SIZES);
if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV610) ||
((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV620) ||
- ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS780)) {
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS780) ||
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS880)) {
sq_ms_fifo_sizes = (R600_CACHE_FIFO_SIZE(0xa) |
R600_FETCH_FIFO_HIWATER(0xa) |
R600_DONE_FIFO_HIWATER(0xe0) |
@@ -978,7 +982,8 @@ static void r600_gfx_init(struct drm_device *dev,
R600_NUM_ES_STACK_ENTRIES(0));
} else if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV610) ||
((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV620) ||
- ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS780)) {
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS780) ||
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS880)) {
/* no vertex cache */
sq_config &= ~R600_VC_ENABLE;
@@ -1035,7 +1040,8 @@ static void r600_gfx_init(struct drm_device *dev,
if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV610) ||
((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV620) ||
- ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS780))
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS780) ||
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS880))
RADEON_WRITE(R600_VGT_CACHE_INVALIDATION, R600_CACHE_INVALIDATION(R600_TC_ONLY));
else
RADEON_WRITE(R600_VGT_CACHE_INVALIDATION, R600_CACHE_INVALIDATION(R600_VC_AND_TC));
@@ -1078,6 +1084,7 @@ static void r600_gfx_init(struct drm_device *dev,
break;
case CHIP_RV610:
case CHIP_RS780:
+ case CHIP_RS880:
case CHIP_RV620:
gs_prim_buffer_depth = 32;
break;
@@ -1123,6 +1130,7 @@ static void r600_gfx_init(struct drm_device *dev,
switch (dev_priv->flags & RADEON_FAMILY_MASK) {
case CHIP_RV610:
case CHIP_RS780:
+ case CHIP_RS880:
case CHIP_RV620:
tc_cntl = R600_TC_L2_SIZE(8);
break;
diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c
index a162ade74b7..9ff6dcb97f9 100644
--- a/drivers/gpu/drm/radeon/radeon_device.c
+++ b/drivers/gpu/drm/radeon/radeon_device.c
@@ -152,7 +152,9 @@ int radeon_mc_setup(struct radeon_device *rdev)
}
} else {
rdev->mc.vram_location = 0;
- rdev->mc.gtt_location = rdev->mc.mc_vram_size;
+ tmp = rdev->mc.mc_vram_size;
+ tmp = (tmp + rdev->mc.gtt_size - 1) & ~(rdev->mc.gtt_size - 1);
+ rdev->mc.gtt_location = tmp;
}
DRM_INFO("radeon: VRAM %uM\n", rdev->mc.real_vram_size >> 20);
DRM_INFO("radeon: VRAM from 0x%08X to 0x%08X\n",
diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c
index 3cfcee17dc5..0bd5879a495 100644
--- a/drivers/gpu/drm/radeon/radeon_drv.c
+++ b/drivers/gpu/drm/radeon/radeon_drv.c
@@ -318,6 +318,14 @@ static int __init radeon_init(void)
driver = &driver_old;
driver->num_ioctls = radeon_max_ioctl;
#if defined(CONFIG_DRM_RADEON_KMS)
+#ifdef CONFIG_VGA_CONSOLE
+ if (vgacon_text_force() && radeon_modeset == -1) {
+ DRM_INFO("VGACON disable radeon kernel modesetting.\n");
+ driver = &driver_old;
+ driver->driver_features &= ~DRIVER_MODESET;
+ radeon_modeset = 0;
+ }
+#endif
/* if enabled by default */
if (radeon_modeset == -1) {
DRM_INFO("radeon default to kernel modesetting.\n");
@@ -329,17 +337,8 @@ static int __init radeon_init(void)
driver->driver_features |= DRIVER_MODESET;
driver->num_ioctls = radeon_max_kms_ioctl;
}
-
/* if the vga console setting is enabled still
* let modprobe override it */
-#ifdef CONFIG_VGA_CONSOLE
- if (vgacon_text_force() && radeon_modeset == -1) {
- DRM_INFO("VGACON disable radeon kernel modesetting.\n");
- driver = &driver_old;
- driver->driver_features &= ~DRIVER_MODESET;
- radeon_modeset = 0;
- }
-#endif
#endif
return drm_init(driver);
}
diff --git a/drivers/gpu/drm/radeon/radeon_drv.h b/drivers/gpu/drm/radeon/radeon_drv.h
index 127d0456f62..3933f8216a3 100644
--- a/drivers/gpu/drm/radeon/radeon_drv.h
+++ b/drivers/gpu/drm/radeon/radeon_drv.h
@@ -143,6 +143,7 @@ enum radeon_family {
CHIP_RV635,
CHIP_RV670,
CHIP_RS780,
+ CHIP_RS880,
CHIP_RV770,
CHIP_RV730,
CHIP_RV710,
diff --git a/drivers/gpu/drm/radeon/radeon_kms.c b/drivers/gpu/drm/radeon/radeon_kms.c
index 937a2f1cdb4..3357110e30c 100644
--- a/drivers/gpu/drm/radeon/radeon_kms.c
+++ b/drivers/gpu/drm/radeon/radeon_kms.c
@@ -58,6 +58,8 @@ int radeon_driver_load_kms(struct drm_device *dev, unsigned long flags)
if (r) {
DRM_ERROR("Failed to initialize radeon, disabling IOCTL\n");
radeon_device_fini(rdev);
+ kfree(rdev);
+ dev->dev_private = NULL;
return r;
}
return 0;
diff --git a/drivers/gpu/drm/radeon/radeon_object.c b/drivers/gpu/drm/radeon/radeon_object.c
index dd9ac2fed6d..e98cae3bf4a 100644
--- a/drivers/gpu/drm/radeon/radeon_object.c
+++ b/drivers/gpu/drm/radeon/radeon_object.c
@@ -106,7 +106,7 @@ static inline uint32_t radeon_object_flags_from_domain(uint32_t domain)
flags |= TTM_PL_FLAG_VRAM | TTM_PL_FLAG_WC | TTM_PL_FLAG_UNCACHED;
}
if (domain & RADEON_GEM_DOMAIN_GTT) {
- flags |= TTM_PL_FLAG_TT | TTM_PL_FLAG_WC | TTM_PL_FLAG_UNCACHED;
+ flags |= TTM_PL_FLAG_TT | TTM_PL_MASK_CACHING;
}
if (domain & RADEON_GEM_DOMAIN_CPU) {
flags |= TTM_PL_FLAG_SYSTEM | TTM_PL_MASK_CACHING;
diff --git a/drivers/gpu/drm/radeon/rv515.c b/drivers/gpu/drm/radeon/rv515.c
index 551e608702e..fd8f3ca716e 100644
--- a/drivers/gpu/drm/radeon/rv515.c
+++ b/drivers/gpu/drm/radeon/rv515.c
@@ -370,6 +370,7 @@ void rv515_vram_info(struct radeon_device *rdev)
rv515_vram_get_type(rdev);
+ r100_vram_init_sizes(rdev);
/* FIXME: we should enforce default clock in case GPU is not in
* default setup
*/
diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c
index 6538d423698..c2b0d710d10 100644
--- a/drivers/gpu/drm/ttm/ttm_bo.c
+++ b/drivers/gpu/drm/ttm/ttm_bo.c
@@ -1182,13 +1182,14 @@ static int ttm_bo_force_list_clean(struct ttm_bo_device *bdev,
int ttm_bo_clean_mm(struct ttm_bo_device *bdev, unsigned mem_type)
{
- struct ttm_mem_type_manager *man = &bdev->man[mem_type];
+ struct ttm_mem_type_manager *man;
int ret = -EINVAL;
if (mem_type >= TTM_NUM_MEM_TYPES) {
printk(KERN_ERR TTM_PFX "Illegal memory type %d\n", mem_type);
return ret;
}
+ man = &bdev->man[mem_type];
if (!man->has_type) {
printk(KERN_ERR TTM_PFX "Trying to take down uninitialized "
@@ -1575,6 +1576,10 @@ int ttm_bo_wait(struct ttm_buffer_object *bo,
driver->sync_obj_unref(&sync_obj);
driver->sync_obj_unref(&tmp_obj);
spin_lock(&bo->lock);
+ } else {
+ spin_unlock(&bo->lock);
+ driver->sync_obj_unref(&sync_obj);
+ spin_lock(&bo->lock);
}
}
return 0;
diff --git a/drivers/gpu/drm/ttm/ttm_bo_util.c b/drivers/gpu/drm/ttm/ttm_bo_util.c
index ce2e6f38ea0..ad4ada07c6c 100644
--- a/drivers/gpu/drm/ttm/ttm_bo_util.c
+++ b/drivers/gpu/drm/ttm/ttm_bo_util.c
@@ -150,7 +150,7 @@ static int ttm_copy_io_ttm_page(struct ttm_tt *ttm, void *src,
#ifdef CONFIG_X86
dst = kmap_atomic_prot(d, KM_USER0, prot);
#else
- if (prot != PAGE_KERNEL)
+ if (pgprot_val(prot) != pgprot_val(PAGE_KERNEL))
dst = vmap(&d, 1, 0, prot);
else
dst = kmap(d);
@@ -163,7 +163,7 @@ static int ttm_copy_io_ttm_page(struct ttm_tt *ttm, void *src,
#ifdef CONFIG_X86
kunmap_atomic(dst, KM_USER0);
#else
- if (prot != PAGE_KERNEL)
+ if (pgprot_val(prot) != pgprot_val(PAGE_KERNEL))
vunmap(dst);
else
kunmap(d);
@@ -186,7 +186,7 @@ static int ttm_copy_ttm_io_page(struct ttm_tt *ttm, void *dst,
#ifdef CONFIG_X86
src = kmap_atomic_prot(s, KM_USER0, prot);
#else
- if (prot != PAGE_KERNEL)
+ if (pgprot_val(prot) != pgprot_val(PAGE_KERNEL))
src = vmap(&s, 1, 0, prot);
else
src = kmap(s);
@@ -199,7 +199,7 @@ static int ttm_copy_ttm_io_page(struct ttm_tt *ttm, void *dst,
#ifdef CONFIG_X86
kunmap_atomic(src, KM_USER0);
#else
- if (prot != PAGE_KERNEL)
+ if (pgprot_val(prot) != pgprot_val(PAGE_KERNEL))
vunmap(src);
else
kunmap(s);
diff --git a/drivers/input/keyboard/matrix_keypad.c b/drivers/input/keyboard/matrix_keypad.c
index e9b2e7cb05b..541b981ff07 100644
--- a/drivers/input/keyboard/matrix_keypad.c
+++ b/drivers/input/keyboard/matrix_keypad.c
@@ -27,6 +27,7 @@ struct matrix_keypad {
const struct matrix_keypad_platform_data *pdata;
struct input_dev *input_dev;
unsigned short *keycodes;
+ unsigned int row_shift;
uint32_t last_key_state[MATRIX_MAX_COLS];
struct delayed_work work;
@@ -136,7 +137,7 @@ static void matrix_keypad_scan(struct work_struct *work)
if ((bits_changed & (1 << row)) == 0)
continue;
- code = (row << 4) + col;
+ code = MATRIX_SCAN_CODE(row, col, keypad->row_shift);
input_event(input_dev, EV_MSC, MSC_SCAN, code);
input_report_key(input_dev,
keypad->keycodes[code],
@@ -317,6 +318,7 @@ static int __devinit matrix_keypad_probe(struct platform_device *pdev)
struct matrix_keypad *keypad;
struct input_dev *input_dev;
unsigned short *keycodes;
+ unsigned int row_shift;
int i;
int err;
@@ -332,14 +334,11 @@ static int __devinit matrix_keypad_probe(struct platform_device *pdev)
return -EINVAL;
}
- if (!keymap_data->max_keymap_size) {
- dev_err(&pdev->dev, "invalid keymap data supplied\n");
- return -EINVAL;
- }
+ row_shift = get_count_order(pdata->num_col_gpios);
keypad = kzalloc(sizeof(struct matrix_keypad), GFP_KERNEL);
- keycodes = kzalloc(keymap_data->max_keymap_size *
- sizeof(keypad->keycodes),
+ keycodes = kzalloc((pdata->num_row_gpios << row_shift) *
+ sizeof(*keycodes),
GFP_KERNEL);
input_dev = input_allocate_device();
if (!keypad || !keycodes || !input_dev) {
@@ -350,6 +349,7 @@ static int __devinit matrix_keypad_probe(struct platform_device *pdev)
keypad->input_dev = input_dev;
keypad->pdata = pdata;
keypad->keycodes = keycodes;
+ keypad->row_shift = row_shift;
keypad->stopped = true;
INIT_DELAYED_WORK(&keypad->work, matrix_keypad_scan);
spin_lock_init(&keypad->lock);
@@ -363,7 +363,7 @@ static int __devinit matrix_keypad_probe(struct platform_device *pdev)
input_dev->keycode = keycodes;
input_dev->keycodesize = sizeof(*keycodes);
- input_dev->keycodemax = keymap_data->max_keymap_size;
+ input_dev->keycodemax = pdata->num_row_gpios << keypad->row_shift;
for (i = 0; i < keymap_data->keymap_size; i++) {
unsigned int key = keymap_data->keymap[i];
@@ -371,7 +371,7 @@ static int __devinit matrix_keypad_probe(struct platform_device *pdev)
unsigned int col = KEY_COL(key);
unsigned short code = KEY_VAL(key);
- keycodes[(row << 4) + col] = code;
+ keycodes[MATRIX_SCAN_CODE(row, col, row_shift)] = code;
__set_bit(code, input_dev->keybit);
}
__clear_bit(KEY_RESERVED, input_dev->keybit);
diff --git a/drivers/input/misc/wistron_btns.c b/drivers/input/misc/wistron_btns.c
index 26e17a9a22e..27ee976eb54 100644
--- a/drivers/input/misc/wistron_btns.c
+++ b/drivers/input/misc/wistron_btns.c
@@ -611,6 +611,20 @@ static struct key_entry keymap_wistron_generic[] __initdata = {
{ KE_END, 0 }
};
+static struct key_entry keymap_prestigio[] __initdata = {
+ { KE_KEY, 0x11, {KEY_PROG1} },
+ { KE_KEY, 0x12, {KEY_PROG2} },
+ { KE_WIFI, 0x30 },
+ { KE_KEY, 0x22, {KEY_REWIND} },
+ { KE_KEY, 0x23, {KEY_FORWARD} },
+ { KE_KEY, 0x24, {KEY_PLAYPAUSE} },
+ { KE_KEY, 0x25, {KEY_STOPCD} },
+ { KE_KEY, 0x31, {KEY_MAIL} },
+ { KE_KEY, 0x36, {KEY_WWW} },
+ { KE_END, 0 }
+};
+
+
/*
* If your machine is not here (which is currently rather likely), please send
* a list of buttons and their key codes (reported when loading this module
@@ -971,6 +985,8 @@ static int __init select_keymap(void)
if (keymap_name != NULL) {
if (strcmp (keymap_name, "1557/MS2141") == 0)
keymap = keymap_wistron_ms2141;
+ else if (strcmp (keymap_name, "prestigio") == 0)
+ keymap = keymap_prestigio;
else if (strcmp (keymap_name, "generic") == 0)
keymap = keymap_wistron_generic;
else {
diff --git a/drivers/input/serio/hp_sdc_mlc.c b/drivers/input/serio/hp_sdc_mlc.c
index b587e2d576a..820e51673b2 100644
--- a/drivers/input/serio/hp_sdc_mlc.c
+++ b/drivers/input/serio/hp_sdc_mlc.c
@@ -296,7 +296,7 @@ static void hp_sdc_mlc_out(hil_mlc *mlc)
priv->tseq[3] = 0;
if (mlc->opacket & HIL_CTRL_APE) {
priv->tseq[3] |= HP_SDC_LPC_APE_IPF;
- down_trylock(&mlc->csem);
+ BUG_ON(down_trylock(&mlc->csem));
}
enqueue:
hp_sdc_enqueue_transaction(&priv->trans);
diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index 924e8ed7f2c..ae04d8a494e 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -78,6 +78,14 @@ static struct dmi_system_id __initdata i8042_dmi_noloop_table[] = {
},
},
{
+ .ident = "ASUS G1S",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer Inc."),
+ DMI_MATCH(DMI_BOARD_NAME, "G1S"),
+ DMI_MATCH(DMI_BOARD_VERSION, "1.0"),
+ },
+ },
+ {
/* AUX LOOP command does not raise AUX IRQ */
.ident = "ASUS P65UP5",
.matches = {
diff --git a/drivers/isdn/mISDN/l1oip_core.c b/drivers/isdn/mISDN/l1oip_core.c
index c3b661a666c..7e5f30dbc0a 100644
--- a/drivers/isdn/mISDN/l1oip_core.c
+++ b/drivers/isdn/mISDN/l1oip_core.c
@@ -1480,7 +1480,7 @@ l1oip_init(void)
return -ENOMEM;
l1oip_cnt = 0;
- while (type[l1oip_cnt] && l1oip_cnt < MAX_CARDS) {
+ while (l1oip_cnt < MAX_CARDS && type[l1oip_cnt]) {
switch (type[l1oip_cnt] & 0xff) {
case 1:
pri = 0;
diff --git a/drivers/lguest/core.c b/drivers/lguest/core.c
index a6974e9b8eb..1e2cb846b3c 100644
--- a/drivers/lguest/core.c
+++ b/drivers/lguest/core.c
@@ -1,6 +1,8 @@
-/*P:400 This contains run_guest() which actually calls into the Host<->Guest
+/*P:400
+ * This contains run_guest() which actually calls into the Host<->Guest
* Switcher and analyzes the return, such as determining if the Guest wants the
- * Host to do something. This file also contains useful helper routines. :*/
+ * Host to do something. This file also contains useful helper routines.
+:*/
#include <linux/module.h>
#include <linux/stringify.h>
#include <linux/stddef.h>
@@ -24,7 +26,8 @@ static struct page **switcher_page;
/* This One Big lock protects all inter-guest data structures. */
DEFINE_MUTEX(lguest_lock);
-/*H:010 We need to set up the Switcher at a high virtual address. Remember the
+/*H:010
+ * We need to set up the Switcher at a high virtual address. Remember the
* Switcher is a few hundred bytes of assembler code which actually changes the
* CPU to run the Guest, and then changes back to the Host when a trap or
* interrupt happens.
@@ -33,7 +36,8 @@ DEFINE_MUTEX(lguest_lock);
* Host since it will be running as the switchover occurs.
*
* Trying to map memory at a particular address is an unusual thing to do, so
- * it's not a simple one-liner. */
+ * it's not a simple one-liner.
+ */
static __init int map_switcher(void)
{
int i, err;
@@ -47,8 +51,10 @@ static __init int map_switcher(void)
* easy.
*/
- /* We allocate an array of struct page pointers. map_vm_area() wants
- * this, rather than just an array of pages. */
+ /*
+ * We allocate an array of struct page pointers. map_vm_area() wants
+ * this, rather than just an array of pages.
+ */
switcher_page = kmalloc(sizeof(switcher_page[0])*TOTAL_SWITCHER_PAGES,
GFP_KERNEL);
if (!switcher_page) {
@@ -56,8 +62,10 @@ static __init int map_switcher(void)
goto out;
}
- /* Now we actually allocate the pages. The Guest will see these pages,
- * so we make sure they're zeroed. */
+ /*
+ * Now we actually allocate the pages. The Guest will see these pages,
+ * so we make sure they're zeroed.
+ */
for (i = 0; i < TOTAL_SWITCHER_PAGES; i++) {
unsigned long addr = get_zeroed_page(GFP_KERNEL);
if (!addr) {
@@ -67,19 +75,23 @@ static __init int map_switcher(void)
switcher_page[i] = virt_to_page(addr);
}
- /* First we check that the Switcher won't overlap the fixmap area at
+ /*
+ * First we check that the Switcher won't overlap the fixmap area at
* the top of memory. It's currently nowhere near, but it could have
- * very strange effects if it ever happened. */
+ * very strange effects if it ever happened.
+ */
if (SWITCHER_ADDR + (TOTAL_SWITCHER_PAGES+1)*PAGE_SIZE > FIXADDR_START){
err = -ENOMEM;
printk("lguest: mapping switcher would thwack fixmap\n");
goto free_pages;
}
- /* Now we reserve the "virtual memory area" we want: 0xFFC00000
+ /*
+ * Now we reserve the "virtual memory area" we want: 0xFFC00000
* (SWITCHER_ADDR). We might not get it in theory, but in practice
* it's worked so far. The end address needs +1 because __get_vm_area
- * allocates an extra guard page, so we need space for that. */
+ * allocates an extra guard page, so we need space for that.
+ */
switcher_vma = __get_vm_area(TOTAL_SWITCHER_PAGES * PAGE_SIZE,
VM_ALLOC, SWITCHER_ADDR, SWITCHER_ADDR
+ (TOTAL_SWITCHER_PAGES+1) * PAGE_SIZE);
@@ -89,11 +101,13 @@ static __init int map_switcher(void)
goto free_pages;
}
- /* This code actually sets up the pages we've allocated to appear at
+ /*
+ * This code actually sets up the pages we've allocated to appear at
* SWITCHER_ADDR. map_vm_area() takes the vma we allocated above, the
* kind of pages we're mapping (kernel pages), and a pointer to our
* array of struct pages. It increments that pointer, but we don't
- * care. */
+ * care.
+ */
pagep = switcher_page;
err = map_vm_area(switcher_vma, PAGE_KERNEL_EXEC, &pagep);
if (err) {
@@ -101,8 +115,10 @@ static __init int map_switcher(void)
goto free_vma;
}
- /* Now the Switcher is mapped at the right address, we can't fail!
- * Copy in the compiled-in Switcher code (from <arch>_switcher.S). */
+ /*
+ * Now the Switcher is mapped at the right address, we can't fail!
+ * Copy in the compiled-in Switcher code (from <arch>_switcher.S).
+ */
memcpy(switcher_vma->addr, start_switcher_text,
end_switcher_text - start_switcher_text);
@@ -124,8 +140,7 @@ out:
}
/*:*/
-/* Cleaning up the mapping when the module is unloaded is almost...
- * too easy. */
+/* Cleaning up the mapping when the module is unloaded is almost... too easy. */
static void unmap_switcher(void)
{
unsigned int i;
@@ -151,16 +166,19 @@ static void unmap_switcher(void)
* But we can't trust the Guest: it might be trying to access the Launcher
* code. We have to check that the range is below the pfn_limit the Launcher
* gave us. We have to make sure that addr + len doesn't give us a false
- * positive by overflowing, too. */
+ * positive by overflowing, too.
+ */
bool lguest_address_ok(const struct lguest *lg,
unsigned long addr, unsigned long len)
{
return (addr+len) / PAGE_SIZE < lg->pfn_limit && (addr+len >= addr);
}
-/* This routine copies memory from the Guest. Here we can see how useful the
+/*
+ * This routine copies memory from the Guest. Here we can see how useful the
* kill_lguest() routine we met in the Launcher can be: we return a random
- * value (all zeroes) instead of needing to return an error. */
+ * value (all zeroes) instead of needing to return an error.
+ */
void __lgread(struct lg_cpu *cpu, void *b, unsigned long addr, unsigned bytes)
{
if (!lguest_address_ok(cpu->lg, addr, bytes)
@@ -181,9 +199,11 @@ void __lgwrite(struct lg_cpu *cpu, unsigned long addr, const void *b,
}
/*:*/
-/*H:030 Let's jump straight to the the main loop which runs the Guest.
+/*H:030
+ * Let's jump straight to the the main loop which runs the Guest.
* Remember, this is called by the Launcher reading /dev/lguest, and we keep
- * going around and around until something interesting happens. */
+ * going around and around until something interesting happens.
+ */
int run_guest(struct lg_cpu *cpu, unsigned long __user *user)
{
/* We stop running once the Guest is dead. */
@@ -195,10 +215,17 @@ int run_guest(struct lg_cpu *cpu, unsigned long __user *user)
if (cpu->hcall)
do_hypercalls(cpu);
- /* It's possible the Guest did a NOTIFY hypercall to the
- * Launcher, in which case we return from the read() now. */
+ /*
+ * It's possible the Guest did a NOTIFY hypercall to the
+ * Launcher.
+ */
if (cpu->pending_notify) {
+ /*
+ * Does it just needs to write to a registered
+ * eventfd (ie. the appropriate virtqueue thread)?
+ */
if (!send_notify_to_eventfd(cpu)) {
+ /* OK, we tell the main Laucher. */
if (put_user(cpu->pending_notify, user))
return -EFAULT;
return sizeof(cpu->pending_notify);
@@ -209,29 +236,39 @@ int run_guest(struct lg_cpu *cpu, unsigned long __user *user)
if (signal_pending(current))
return -ERESTARTSYS;
- /* Check if there are any interrupts which can be delivered now:
+ /*
+ * Check if there are any interrupts which can be delivered now:
* if so, this sets up the hander to be executed when we next
- * run the Guest. */
+ * run the Guest.
+ */
irq = interrupt_pending(cpu, &more);
if (irq < LGUEST_IRQS)
try_deliver_interrupt(cpu, irq, more);
- /* All long-lived kernel loops need to check with this horrible
+ /*
+ * All long-lived kernel loops need to check with this horrible
* thing called the freezer. If the Host is trying to suspend,
- * it stops us. */
+ * it stops us.
+ */
try_to_freeze();
- /* Just make absolutely sure the Guest is still alive. One of
- * those hypercalls could have been fatal, for example. */
+ /*
+ * Just make absolutely sure the Guest is still alive. One of
+ * those hypercalls could have been fatal, for example.
+ */
if (cpu->lg->dead)
break;
- /* If the Guest asked to be stopped, we sleep. The Guest's
- * clock timer will wake us. */
+ /*
+ * If the Guest asked to be stopped, we sleep. The Guest's
+ * clock timer will wake us.
+ */
if (cpu->halted) {
set_current_state(TASK_INTERRUPTIBLE);
- /* Just before we sleep, make sure no interrupt snuck in
- * which we should be doing. */
+ /*
+ * Just before we sleep, make sure no interrupt snuck in
+ * which we should be doing.
+ */
if (interrupt_pending(cpu, &more) < LGUEST_IRQS)
set_current_state(TASK_RUNNING);
else
@@ -239,8 +276,10 @@ int run_guest(struct lg_cpu *cpu, unsigned long __user *user)
continue;
}
- /* OK, now we're ready to jump into the Guest. First we put up
- * the "Do Not Disturb" sign: */
+ /*
+ * OK, now we're ready to jump into the Guest. First we put up
+ * the "Do Not Disturb" sign:
+ */
local_irq_disable();
/* Actually run the Guest until something happens. */
@@ -327,8 +366,10 @@ static void __exit fini(void)
}
/*:*/
-/* The Host side of lguest can be a module. This is a nice way for people to
- * play with it. */
+/*
+ * The Host side of lguest can be a module. This is a nice way for people to
+ * play with it.
+ */
module_init(init);
module_exit(fini);
MODULE_LICENSE("GPL");
diff --git a/drivers/lguest/hypercalls.c b/drivers/lguest/hypercalls.c
index c29ffa19cb7..83511eb0923 100644
--- a/drivers/lguest/hypercalls.c
+++ b/drivers/lguest/hypercalls.c
@@ -1,8 +1,10 @@
-/*P:500 Just as userspace programs request kernel operations through a system
+/*P:500
+ * Just as userspace programs request kernel operations through a system
* call, the Guest requests Host operations through a "hypercall". You might
* notice this nomenclature doesn't really follow any logic, but the name has
* been around for long enough that we're stuck with it. As you'd expect, this
- * code is basically a one big switch statement. :*/
+ * code is basically a one big switch statement.
+:*/
/* Copyright (C) 2006 Rusty Russell IBM Corporation
@@ -28,30 +30,41 @@
#include <asm/pgtable.h>
#include "lg.h"
-/*H:120 This is the core hypercall routine: where the Guest gets what it wants.
- * Or gets killed. Or, in the case of LHCALL_SHUTDOWN, both. */
+/*H:120
+ * This is the core hypercall routine: where the Guest gets what it wants.
+ * Or gets killed. Or, in the case of LHCALL_SHUTDOWN, both.
+ */
static void do_hcall(struct lg_cpu *cpu, struct hcall_args *args)
{
switch (args->arg0) {
case LHCALL_FLUSH_ASYNC:
- /* This call does nothing, except by breaking out of the Guest
- * it makes us process all the asynchronous hypercalls. */
+ /*
+ * This call does nothing, except by breaking out of the Guest
+ * it makes us process all the asynchronous hypercalls.
+ */
break;
case LHCALL_SEND_INTERRUPTS:
- /* This call does nothing too, but by breaking out of the Guest
- * it makes us process any pending interrupts. */
+ /*
+ * This call does nothing too, but by breaking out of the Guest
+ * it makes us process any pending interrupts.
+ */
break;
case LHCALL_LGUEST_INIT:
- /* You can't get here unless you're already initialized. Don't
- * do that. */
+ /*
+ * You can't get here unless you're already initialized. Don't
+ * do that.
+ */
kill_guest(cpu, "already have lguest_data");
break;
case LHCALL_SHUTDOWN: {
- /* Shutdown is such a trivial hypercall that we do it in four
- * lines right here. */
char msg[128];
- /* If the lgread fails, it will call kill_guest() itself; the
- * kill_guest() with the message will be ignored. */
+ /*
+ * Shutdown is such a trivial hypercall that we do it in five
+ * lines right here.
+ *
+ * If the lgread fails, it will call kill_guest() itself; the
+ * kill_guest() with the message will be ignored.
+ */
__lgread(cpu, msg, args->arg1, sizeof(msg));
msg[sizeof(msg)-1] = '\0';
kill_guest(cpu, "CRASH: %s", msg);
@@ -60,16 +73,17 @@ static void do_hcall(struct lg_cpu *cpu, struct hcall_args *args)
break;
}
case LHCALL_FLUSH_TLB:
- /* FLUSH_TLB comes in two flavors, depending on the
- * argument: */
+ /* FLUSH_TLB comes in two flavors, depending on the argument: */
if (args->arg1)
guest_pagetable_clear_all(cpu);
else
guest_pagetable_flush_user(cpu);
break;
- /* All these calls simply pass the arguments through to the right
- * routines. */
+ /*
+ * All these calls simply pass the arguments through to the right
+ * routines.
+ */
case LHCALL_NEW_PGTABLE:
guest_new_pagetable(cpu, args->arg1);
break;
@@ -112,15 +126,16 @@ static void do_hcall(struct lg_cpu *cpu, struct hcall_args *args)
kill_guest(cpu, "Bad hypercall %li\n", args->arg0);
}
}
-/*:*/
-/*H:124 Asynchronous hypercalls are easy: we just look in the array in the
+/*H:124
+ * Asynchronous hypercalls are easy: we just look in the array in the
* Guest's "struct lguest_data" to see if any new ones are marked "ready".
*
* We are careful to do these in order: obviously we respect the order the
* Guest put them in the ring, but we also promise the Guest that they will
* happen before any normal hypercall (which is why we check this before
- * checking for a normal hcall). */
+ * checking for a normal hcall).
+ */
static void do_async_hcalls(struct lg_cpu *cpu)
{
unsigned int i;
@@ -133,22 +148,28 @@ static void do_async_hcalls(struct lg_cpu *cpu)
/* We process "struct lguest_data"s hcalls[] ring once. */
for (i = 0; i < ARRAY_SIZE(st); i++) {
struct hcall_args args;
- /* We remember where we were up to from last time. This makes
+ /*
+ * We remember where we were up to from last time. This makes
* sure that the hypercalls are done in the order the Guest
- * places them in the ring. */
+ * places them in the ring.
+ */
unsigned int n = cpu->next_hcall;
/* 0xFF means there's no call here (yet). */
if (st[n] == 0xFF)
break;
- /* OK, we have hypercall. Increment the "next_hcall" cursor,
- * and wrap back to 0 if we reach the end. */
+ /*
+ * OK, we have hypercall. Increment the "next_hcall" cursor,
+ * and wrap back to 0 if we reach the end.
+ */
if (++cpu->next_hcall == LHCALL_RING_SIZE)
cpu->next_hcall = 0;
- /* Copy the hypercall arguments into a local copy of
- * the hcall_args struct. */
+ /*
+ * Copy the hypercall arguments into a local copy of the
+ * hcall_args struct.
+ */
if (copy_from_user(&args, &cpu->lg->lguest_data->hcalls[n],
sizeof(struct hcall_args))) {
kill_guest(cpu, "Fetching async hypercalls");
@@ -164,19 +185,25 @@ static void do_async_hcalls(struct lg_cpu *cpu)
break;
}
- /* Stop doing hypercalls if they want to notify the Launcher:
- * it needs to service this first. */
+ /*
+ * Stop doing hypercalls if they want to notify the Launcher:
+ * it needs to service this first.
+ */
if (cpu->pending_notify)
break;
}
}
-/* Last of all, we look at what happens first of all. The very first time the
- * Guest makes a hypercall, we end up here to set things up: */
+/*
+ * Last of all, we look at what happens first of all. The very first time the
+ * Guest makes a hypercall, we end up here to set things up:
+ */
static void initialize(struct lg_cpu *cpu)
{
- /* You can't do anything until you're initialized. The Guest knows the
- * rules, so we're unforgiving here. */
+ /*
+ * You can't do anything until you're initialized. The Guest knows the
+ * rules, so we're unforgiving here.
+ */
if (cpu->hcall->arg0 != LHCALL_LGUEST_INIT) {
kill_guest(cpu, "hypercall %li before INIT", cpu->hcall->arg0);
return;
@@ -185,32 +212,44 @@ static void initialize(struct lg_cpu *cpu)
if (lguest_arch_init_hypercalls(cpu))
kill_guest(cpu, "bad guest page %p", cpu->lg->lguest_data);
- /* The Guest tells us where we're not to deliver interrupts by putting
- * the range of addresses into "struct lguest_data". */
+ /*
+ * The Guest tells us where we're not to deliver interrupts by putting
+ * the range of addresses into "struct lguest_data".
+ */
if (get_user(cpu->lg->noirq_start, &cpu->lg->lguest_data->noirq_start)
|| get_user(cpu->lg->noirq_end, &cpu->lg->lguest_data->noirq_end))
kill_guest(cpu, "bad guest page %p", cpu->lg->lguest_data);
- /* We write the current time into the Guest's data page once so it can
- * set its clock. */
+ /*
+ * We write the current time into the Guest's data page once so it can
+ * set its clock.
+ */
write_timestamp(cpu);
/* page_tables.c will also do some setup. */
page_table_guest_data_init(cpu);
- /* This is the one case where the above accesses might have been the
+ /*
+ * This is the one case where the above accesses might have been the
* first write to a Guest page. This may have caused a copy-on-write
* fault, but the old page might be (read-only) in the Guest
- * pagetable. */
+ * pagetable.
+ */
guest_pagetable_clear_all(cpu);
}
/*:*/
-/*M:013 If a Guest reads from a page (so creates a mapping) that it has never
+/*M:013
+ * If a Guest reads from a page (so creates a mapping) that it has never
* written to, and then the Launcher writes to it (ie. the output of a virtual
* device), the Guest will still see the old page. In practice, this never
* happens: why would the Guest read a page which it has never written to? But
- * a similar scenario might one day bite us, so it's worth mentioning. :*/
+ * a similar scenario might one day bite us, so it's worth mentioning.
+ *
+ * Note that if we used a shared anonymous mapping in the Launcher instead of
+ * mapping /dev/zero private, we wouldn't worry about cop-on-write. And we
+ * need that to switch the Launcher to processes (away from threads) anyway.
+:*/
/*H:100
* Hypercalls
@@ -229,17 +268,22 @@ void do_hypercalls(struct lg_cpu *cpu)
return;
}
- /* The Guest has initialized.
+ /*
+ * The Guest has initialized.
*
- * Look in the hypercall ring for the async hypercalls: */
+ * Look in the hypercall ring for the async hypercalls:
+ */
do_async_hcalls(cpu);
- /* If we stopped reading the hypercall ring because the Guest did a
+ /*
+ * If we stopped reading the hypercall ring because the Guest did a
* NOTIFY to the Launcher, we want to return now. Otherwise we do
- * the hypercall. */
+ * the hypercall.
+ */
if (!cpu->pending_notify) {
do_hcall(cpu, cpu->hcall);
- /* Tricky point: we reset the hcall pointer to mark the
+ /*
+ * Tricky point: we reset the hcall pointer to mark the
* hypercall as "done". We use the hcall pointer rather than
* the trap number to indicate a hypercall is pending.
* Normally it doesn't matter: the Guest will run again and
@@ -248,13 +292,16 @@ void do_hypercalls(struct lg_cpu *cpu)
* However, if we are signalled or the Guest sends I/O to the
* Launcher, the run_guest() loop will exit without running the
* Guest. When it comes back it would try to re-run the
- * hypercall. Finding that bug sucked. */
+ * hypercall. Finding that bug sucked.
+ */
cpu->hcall = NULL;
}
}
-/* This routine supplies the Guest with time: it's used for wallclock time at
- * initial boot and as a rough time source if the TSC isn't available. */
+/*
+ * This routine supplies the Guest with time: it's used for wallclock time at
+ * initial boot and as a rough time source if the TSC isn't available.
+ */
void write_timestamp(struct lg_cpu *cpu)
{
struct timespec now;
diff --git a/drivers/lguest/interrupts_and_traps.c b/drivers/lguest/interrupts_and_traps.c
index 0e9067b0d50..18648180db0 100644
--- a/drivers/lguest/interrupts_and_traps.c
+++ b/drivers/lguest/interrupts_and_traps.c
@@ -1,4 +1,5 @@
-/*P:800 Interrupts (traps) are complicated enough to earn their own file.
+/*P:800
+ * Interrupts (traps) are complicated enough to earn their own file.
* There are three classes of interrupts:
*
* 1) Real hardware interrupts which occur while we're running the Guest,
@@ -10,7 +11,8 @@
* just like real hardware would deliver them. Traps from the Guest can be set
* up to go directly back into the Guest, but sometimes the Host wants to see
* them first, so we also have a way of "reflecting" them into the Guest as if
- * they had been delivered to it directly. :*/
+ * they had been delivered to it directly.
+:*/
#include <linux/uaccess.h>
#include <linux/interrupt.h>
#include <linux/module.h>
@@ -26,8 +28,10 @@ static unsigned long idt_address(u32 lo, u32 hi)
return (lo & 0x0000FFFF) | (hi & 0xFFFF0000);
}
-/* The "type" of the interrupt handler is a 4 bit field: we only support a
- * couple of types. */
+/*
+ * The "type" of the interrupt handler is a 4 bit field: we only support a
+ * couple of types.
+ */
static int idt_type(u32 lo, u32 hi)
{
return (hi >> 8) & 0xF;
@@ -39,8 +43,10 @@ static bool idt_present(u32 lo, u32 hi)
return (hi & 0x8000);
}
-/* We need a helper to "push" a value onto the Guest's stack, since that's a
- * big part of what delivering an interrupt does. */
+/*
+ * We need a helper to "push" a value onto the Guest's stack, since that's a
+ * big part of what delivering an interrupt does.
+ */
static void push_guest_stack(struct lg_cpu *cpu, unsigned long *gstack, u32 val)
{
/* Stack grows upwards: move stack then write value. */
@@ -48,7 +54,8 @@ static void push_guest_stack(struct lg_cpu *cpu, unsigned long *gstack, u32 val)
lgwrite(cpu, *gstack, u32, val);
}
-/*H:210 The set_guest_interrupt() routine actually delivers the interrupt or
+/*H:210
+ * The set_guest_interrupt() routine actually delivers the interrupt or
* trap. The mechanics of delivering traps and interrupts to the Guest are the
* same, except some traps have an "error code" which gets pushed onto the
* stack as well: the caller tells us if this is one.
@@ -59,7 +66,8 @@ static void push_guest_stack(struct lg_cpu *cpu, unsigned long *gstack, u32 val)
*
* We set up the stack just like the CPU does for a real interrupt, so it's
* identical for the Guest (and the standard "iret" instruction will undo
- * it). */
+ * it).
+ */
static void set_guest_interrupt(struct lg_cpu *cpu, u32 lo, u32 hi,
bool has_err)
{
@@ -67,20 +75,26 @@ static void set_guest_interrupt(struct lg_cpu *cpu, u32 lo, u32 hi,
u32 eflags, ss, irq_enable;
unsigned long virtstack;
- /* There are two cases for interrupts: one where the Guest is already
+ /*
+ * There are two cases for interrupts: one where the Guest is already
* in the kernel, and a more complex one where the Guest is in
- * userspace. We check the privilege level to find out. */
+ * userspace. We check the privilege level to find out.
+ */
if ((cpu->regs->ss&0x3) != GUEST_PL) {
- /* The Guest told us their kernel stack with the SET_STACK
- * hypercall: both the virtual address and the segment */
+ /*
+ * The Guest told us their kernel stack with the SET_STACK
+ * hypercall: both the virtual address and the segment.
+ */
virtstack = cpu->esp1;
ss = cpu->ss1;
origstack = gstack = guest_pa(cpu, virtstack);
- /* We push the old stack segment and pointer onto the new
+ /*
+ * We push the old stack segment and pointer onto the new
* stack: when the Guest does an "iret" back from the interrupt
* handler the CPU will notice they're dropping privilege
- * levels and expect these here. */
+ * levels and expect these here.
+ */
push_guest_stack(cpu, &gstack, cpu->regs->ss);
push_guest_stack(cpu, &gstack, cpu->regs->esp);
} else {
@@ -91,18 +105,22 @@ static void set_guest_interrupt(struct lg_cpu *cpu, u32 lo, u32 hi,
origstack = gstack = guest_pa(cpu, virtstack);
}
- /* Remember that we never let the Guest actually disable interrupts, so
+ /*
+ * Remember that we never let the Guest actually disable interrupts, so
* the "Interrupt Flag" bit is always set. We copy that bit from the
* Guest's "irq_enabled" field into the eflags word: we saw the Guest
- * copy it back in "lguest_iret". */
+ * copy it back in "lguest_iret".
+ */
eflags = cpu->regs->eflags;
if (get_user(irq_enable, &cpu->lg->lguest_data->irq_enabled) == 0
&& !(irq_enable & X86_EFLAGS_IF))
eflags &= ~X86_EFLAGS_IF;
- /* An interrupt is expected to push three things on the stack: the old
+ /*
+ * An interrupt is expected to push three things on the stack: the old
* "eflags" word, the old code segment, and the old instruction
- * pointer. */
+ * pointer.
+ */
push_guest_stack(cpu, &gstack, eflags);
push_guest_stack(cpu, &gstack, cpu->regs->cs);
push_guest_stack(cpu, &gstack, cpu->regs->eip);
@@ -111,15 +129,19 @@ static void set_guest_interrupt(struct lg_cpu *cpu, u32 lo, u32 hi,
if (has_err)
push_guest_stack(cpu, &gstack, cpu->regs->errcode);
- /* Now we've pushed all the old state, we change the stack, the code
- * segment and the address to execute. */
+ /*
+ * Now we've pushed all the old state, we change the stack, the code
+ * segment and the address to execute.
+ */
cpu->regs->ss = ss;
cpu->regs->esp = virtstack + (gstack - origstack);
cpu->regs->cs = (__KERNEL_CS|GUEST_PL);
cpu->regs->eip = idt_address(lo, hi);
- /* There are two kinds of interrupt handlers: 0xE is an "interrupt
- * gate" which expects interrupts to be disabled on entry. */
+ /*
+ * There are two kinds of interrupt handlers: 0xE is an "interrupt
+ * gate" which expects interrupts to be disabled on entry.
+ */
if (idt_type(lo, hi) == 0xE)
if (put_user(0, &cpu->lg->lguest_data->irq_enabled))
kill_guest(cpu, "Disabling interrupts");
@@ -130,7 +152,8 @@ static void set_guest_interrupt(struct lg_cpu *cpu, u32 lo, u32 hi,
*
* interrupt_pending() returns the first pending interrupt which isn't blocked
* by the Guest. It is called before every entry to the Guest, and just before
- * we go to sleep when the Guest has halted itself. */
+ * we go to sleep when the Guest has halted itself.
+ */
unsigned int interrupt_pending(struct lg_cpu *cpu, bool *more)
{
unsigned int irq;
@@ -140,8 +163,10 @@ unsigned int interrupt_pending(struct lg_cpu *cpu, bool *more)
if (!cpu->lg->lguest_data)
return LGUEST_IRQS;
- /* Take our "irqs_pending" array and remove any interrupts the Guest
- * wants blocked: the result ends up in "blk". */
+ /*
+ * Take our "irqs_pending" array and remove any interrupts the Guest
+ * wants blocked: the result ends up in "blk".
+ */
if (copy_from_user(&blk, cpu->lg->lguest_data->blocked_interrupts,
sizeof(blk)))
return LGUEST_IRQS;
@@ -154,16 +179,20 @@ unsigned int interrupt_pending(struct lg_cpu *cpu, bool *more)
return irq;
}
-/* This actually diverts the Guest to running an interrupt handler, once an
- * interrupt has been identified by interrupt_pending(). */
+/*
+ * This actually diverts the Guest to running an interrupt handler, once an
+ * interrupt has been identified by interrupt_pending().
+ */
void try_deliver_interrupt(struct lg_cpu *cpu, unsigned int irq, bool more)
{
struct desc_struct *idt;
BUG_ON(irq >= LGUEST_IRQS);
- /* They may be in the middle of an iret, where they asked us never to
- * deliver interrupts. */
+ /*
+ * They may be in the middle of an iret, where they asked us never to
+ * deliver interrupts.
+ */
if (cpu->regs->eip >= cpu->lg->noirq_start &&
(cpu->regs->eip < cpu->lg->noirq_end))
return;
@@ -187,29 +216,37 @@ void try_deliver_interrupt(struct lg_cpu *cpu, unsigned int irq, bool more)
}
}
- /* Look at the IDT entry the Guest gave us for this interrupt. The
+ /*
+ * Look at the IDT entry the Guest gave us for this interrupt. The
* first 32 (FIRST_EXTERNAL_VECTOR) entries are for traps, so we skip
- * over them. */
+ * over them.
+ */
idt = &cpu->arch.idt[FIRST_EXTERNAL_VECTOR+irq];
/* If they don't have a handler (yet?), we just ignore it */
if (idt_present(idt->a, idt->b)) {
/* OK, mark it no longer pending and deliver it. */
clear_bit(irq, cpu->irqs_pending);
- /* set_guest_interrupt() takes the interrupt descriptor and a
+ /*
+ * set_guest_interrupt() takes the interrupt descriptor and a
* flag to say whether this interrupt pushes an error code onto
- * the stack as well: virtual interrupts never do. */
+ * the stack as well: virtual interrupts never do.
+ */
set_guest_interrupt(cpu, idt->a, idt->b, false);
}
- /* Every time we deliver an interrupt, we update the timestamp in the
+ /*
+ * Every time we deliver an interrupt, we update the timestamp in the
* Guest's lguest_data struct. It would be better for the Guest if we
* did this more often, but it can actually be quite slow: doing it
* here is a compromise which means at least it gets updated every
- * timer interrupt. */
+ * timer interrupt.
+ */
write_timestamp(cpu);
- /* If there are no other interrupts we want to deliver, clear
- * the pending flag. */
+ /*
+ * If there are no other interrupts we want to deliver, clear
+ * the pending flag.
+ */
if (!more)
put_user(0, &cpu->lg->lguest_data->irq_pending);
}
@@ -217,24 +254,29 @@ void try_deliver_interrupt(struct lg_cpu *cpu, unsigned int irq, bool more)
/* And this is the routine when we want to set an interrupt for the Guest. */
void set_interrupt(struct lg_cpu *cpu, unsigned int irq)
{
- /* Next time the Guest runs, the core code will see if it can deliver
- * this interrupt. */
+ /*
+ * Next time the Guest runs, the core code will see if it can deliver
+ * this interrupt.
+ */
set_bit(irq, cpu->irqs_pending);
- /* Make sure it sees it; it might be asleep (eg. halted), or
- * running the Guest right now, in which case kick_process()
- * will knock it out. */
+ /*
+ * Make sure it sees it; it might be asleep (eg. halted), or running
+ * the Guest right now, in which case kick_process() will knock it out.
+ */
if (!wake_up_process(cpu->tsk))
kick_process(cpu->tsk);
}
/*:*/
-/* Linux uses trap 128 for system calls. Plan9 uses 64, and Ron Minnich sent
+/*
+ * Linux uses trap 128 for system calls. Plan9 uses 64, and Ron Minnich sent
* me a patch, so we support that too. It'd be a big step for lguest if half
* the Plan 9 user base were to start using it.
*
* Actually now I think of it, it's possible that Ron *is* half the Plan 9
- * userbase. Oh well. */
+ * userbase. Oh well.
+ */
static bool could_be_syscall(unsigned int num)
{
/* Normal Linux SYSCALL_VECTOR or reserved vector? */
@@ -274,9 +316,11 @@ void free_interrupts(void)
clear_bit(syscall_vector, used_vectors);
}
-/*H:220 Now we've got the routines to deliver interrupts, delivering traps like
+/*H:220
+ * Now we've got the routines to deliver interrupts, delivering traps like
* page fault is easy. The only trick is that Intel decided that some traps
- * should have error codes: */
+ * should have error codes:
+ */
static bool has_err(unsigned int trap)
{
return (trap == 8 || (trap >= 10 && trap <= 14) || trap == 17);
@@ -285,13 +329,17 @@ static bool has_err(unsigned int trap)
/* deliver_trap() returns true if it could deliver the trap. */
bool deliver_trap(struct lg_cpu *cpu, unsigned int num)
{
- /* Trap numbers are always 8 bit, but we set an impossible trap number
- * for traps inside the Switcher, so check that here. */
+ /*
+ * Trap numbers are always 8 bit, but we set an impossible trap number
+ * for traps inside the Switcher, so check that here.
+ */
if (num >= ARRAY_SIZE(cpu->arch.idt))
return false;
- /* Early on the Guest hasn't set the IDT entries (or maybe it put a
- * bogus one in): if we fail here, the Guest will be killed. */
+ /*
+ * Early on the Guest hasn't set the IDT entries (or maybe it put a
+ * bogus one in): if we fail here, the Guest will be killed.
+ */
if (!idt_present(cpu->arch.idt[num].a, cpu->arch.idt[num].b))
return false;
set_guest_interrupt(cpu, cpu->arch.idt[num].a,
@@ -299,7 +347,8 @@ bool deliver_trap(struct lg_cpu *cpu, unsigned int num)
return true;
}
-/*H:250 Here's the hard part: returning to the Host every time a trap happens
+/*H:250
+ * Here's the hard part: returning to the Host every time a trap happens
* and then calling deliver_trap() and re-entering the Guest is slow.
* Particularly because Guest userspace system calls are traps (usually trap
* 128).
@@ -311,69 +360,87 @@ bool deliver_trap(struct lg_cpu *cpu, unsigned int num)
* the other hypervisors would beat it up at lunchtime.
*
* This routine indicates if a particular trap number could be delivered
- * directly. */
+ * directly.
+ */
static bool direct_trap(unsigned int num)
{
- /* Hardware interrupts don't go to the Guest at all (except system
- * call). */
+ /*
+ * Hardware interrupts don't go to the Guest at all (except system
+ * call).
+ */
if (num >= FIRST_EXTERNAL_VECTOR && !could_be_syscall(num))
return false;
- /* The Host needs to see page faults (for shadow paging and to save the
+ /*
+ * The Host needs to see page faults (for shadow paging and to save the
* fault address), general protection faults (in/out emulation) and
* device not available (TS handling), invalid opcode fault (kvm hcall),
- * and of course, the hypercall trap. */
+ * and of course, the hypercall trap.
+ */
return num != 14 && num != 13 && num != 7 &&
num != 6 && num != LGUEST_TRAP_ENTRY;
}
/*:*/
-/*M:005 The Guest has the ability to turn its interrupt gates into trap gates,
+/*M:005
+ * The Guest has the ability to turn its interrupt gates into trap gates,
* if it is careful. The Host will let trap gates can go directly to the
* Guest, but the Guest needs the interrupts atomically disabled for an
* interrupt gate. It can do this by pointing the trap gate at instructions
- * within noirq_start and noirq_end, where it can safely disable interrupts. */
+ * within noirq_start and noirq_end, where it can safely disable interrupts.
+ */
-/*M:006 The Guests do not use the sysenter (fast system call) instruction,
+/*M:006
+ * The Guests do not use the sysenter (fast system call) instruction,
* because it's hardcoded to enter privilege level 0 and so can't go direct.
* It's about twice as fast as the older "int 0x80" system call, so it might
* still be worthwhile to handle it in the Switcher and lcall down to the
* Guest. The sysenter semantics are hairy tho: search for that keyword in
- * entry.S :*/
+ * entry.S
+:*/
-/*H:260 When we make traps go directly into the Guest, we need to make sure
+/*H:260
+ * When we make traps go directly into the Guest, we need to make sure
* the kernel stack is valid (ie. mapped in the page tables). Otherwise, the
* CPU trying to deliver the trap will fault while trying to push the interrupt
* words on the stack: this is called a double fault, and it forces us to kill
* the Guest.
*
- * Which is deeply unfair, because (literally!) it wasn't the Guests' fault. */
+ * Which is deeply unfair, because (literally!) it wasn't the Guests' fault.
+ */
void pin_stack_pages(struct lg_cpu *cpu)
{
unsigned int i;
- /* Depending on the CONFIG_4KSTACKS option, the Guest can have one or
- * two pages of stack space. */
+ /*
+ * Depending on the CONFIG_4KSTACKS option, the Guest can have one or
+ * two pages of stack space.
+ */
for (i = 0; i < cpu->lg->stack_pages; i++)
- /* The stack grows *upwards*, so the address we're given is the
+ /*
+ * The stack grows *upwards*, so the address we're given is the
* start of the page after the kernel stack. Subtract one to
* get back onto the first stack page, and keep subtracting to
- * get to the rest of the stack pages. */
+ * get to the rest of the stack pages.
+ */
pin_page(cpu, cpu->esp1 - 1 - i * PAGE_SIZE);
}
-/* Direct traps also mean that we need to know whenever the Guest wants to use
+/*
+ * Direct traps also mean that we need to know whenever the Guest wants to use
* a different kernel stack, so we can change the IDT entries to use that
* stack. The IDT entries expect a virtual address, so unlike most addresses
* the Guest gives us, the "esp" (stack pointer) value here is virtual, not
* physical.
*
* In Linux each process has its own kernel stack, so this happens a lot: we
- * change stacks on each context switch. */
+ * change stacks on each context switch.
+ */
void guest_set_stack(struct lg_cpu *cpu, u32 seg, u32 esp, unsigned int pages)
{
- /* You are not allowed have a stack segment with privilege level 0: bad
- * Guest! */
+ /*
+ * You're not allowed a stack segment with privilege level 0: bad Guest!
+ */
if ((seg & 0x3) != GUEST_PL)
kill_guest(cpu, "bad stack segment %i", seg);
/* We only expect one or two stack pages. */
@@ -387,11 +454,15 @@ void guest_set_stack(struct lg_cpu *cpu, u32 seg, u32 esp, unsigned int pages)
pin_stack_pages(cpu);
}
-/* All this reference to mapping stacks leads us neatly into the other complex
- * part of the Host: page table handling. */
+/*
+ * All this reference to mapping stacks leads us neatly into the other complex
+ * part of the Host: page table handling.
+ */
-/*H:235 This is the routine which actually checks the Guest's IDT entry and
- * transfers it into the entry in "struct lguest": */
+/*H:235
+ * This is the routine which actually checks the Guest's IDT entry and
+ * transfers it into the entry in "struct lguest":
+ */
static void set_trap(struct lg_cpu *cpu, struct desc_struct *trap,
unsigned int num, u32 lo, u32 hi)
{
@@ -407,30 +478,38 @@ static void set_trap(struct lg_cpu *cpu, struct desc_struct *trap,
if (type != 0xE && type != 0xF)
kill_guest(cpu, "bad IDT type %i", type);
- /* We only copy the handler address, present bit, privilege level and
+ /*
+ * We only copy the handler address, present bit, privilege level and
* type. The privilege level controls where the trap can be triggered
* manually with an "int" instruction. This is usually GUEST_PL,
- * except for system calls which userspace can use. */
+ * except for system calls which userspace can use.
+ */
trap->a = ((__KERNEL_CS|GUEST_PL)<<16) | (lo&0x0000FFFF);
trap->b = (hi&0xFFFFEF00);
}
-/*H:230 While we're here, dealing with delivering traps and interrupts to the
+/*H:230
+ * While we're here, dealing with delivering traps and interrupts to the
* Guest, we might as well complete the picture: how the Guest tells us where
* it wants them to go. This would be simple, except making traps fast
* requires some tricks.
*
* We saw the Guest setting Interrupt Descriptor Table (IDT) entries with the
- * LHCALL_LOAD_IDT_ENTRY hypercall before: that comes here. */
+ * LHCALL_LOAD_IDT_ENTRY hypercall before: that comes here.
+ */
void load_guest_idt_entry(struct lg_cpu *cpu, unsigned int num, u32 lo, u32 hi)
{
- /* Guest never handles: NMI, doublefault, spurious interrupt or
- * hypercall. We ignore when it tries to set them. */
+ /*
+ * Guest never handles: NMI, doublefault, spurious interrupt or
+ * hypercall. We ignore when it tries to set them.
+ */
if (num == 2 || num == 8 || num == 15 || num == LGUEST_TRAP_ENTRY)
return;
- /* Mark the IDT as changed: next time the Guest runs we'll know we have
- * to copy this again. */
+ /*
+ * Mark the IDT as changed: next time the Guest runs we'll know we have
+ * to copy this again.
+ */
cpu->changed |= CHANGED_IDT;
/* Check that the Guest doesn't try to step outside the bounds. */
@@ -440,9 +519,11 @@ void load_guest_idt_entry(struct lg_cpu *cpu, unsigned int num, u32 lo, u32 hi)
set_trap(cpu, &cpu->arch.idt[num], num, lo, hi);
}
-/* The default entry for each interrupt points into the Switcher routines which
+/*
+ * The default entry for each interrupt points into the Switcher routines which
* simply return to the Host. The run_guest() loop will then call
- * deliver_trap() to bounce it back into the Guest. */
+ * deliver_trap() to bounce it back into the Guest.
+ */
static void default_idt_entry(struct desc_struct *idt,
int trap,
const unsigned long handler,
@@ -451,13 +532,17 @@ static void default_idt_entry(struct desc_struct *idt,
/* A present interrupt gate. */
u32 flags = 0x8e00;
- /* Set the privilege level on the entry for the hypercall: this allows
- * the Guest to use the "int" instruction to trigger it. */
+ /*
+ * Set the privilege level on the entry for the hypercall: this allows
+ * the Guest to use the "int" instruction to trigger it.
+ */
if (trap == LGUEST_TRAP_ENTRY)
flags |= (GUEST_PL << 13);
else if (base)
- /* Copy priv. level from what Guest asked for. This allows
- * debug (int 3) traps from Guest userspace, for example. */
+ /*
+ * Copy privilege level from what Guest asked for. This allows
+ * debug (int 3) traps from Guest userspace, for example.
+ */
flags |= (base->b & 0x6000);
/* Now pack it into the IDT entry in its weird format. */
@@ -475,16 +560,20 @@ void setup_default_idt_entries(struct lguest_ro_state *state,
default_idt_entry(&state->guest_idt[i], i, def[i], NULL);
}
-/*H:240 We don't use the IDT entries in the "struct lguest" directly, instead
+/*H:240
+ * We don't use the IDT entries in the "struct lguest" directly, instead
* we copy them into the IDT which we've set up for Guests on this CPU, just
- * before we run the Guest. This routine does that copy. */
+ * before we run the Guest. This routine does that copy.
+ */
void copy_traps(const struct lg_cpu *cpu, struct desc_struct *idt,
const unsigned long *def)
{
unsigned int i;
- /* We can simply copy the direct traps, otherwise we use the default
- * ones in the Switcher: they will return to the Host. */
+ /*
+ * We can simply copy the direct traps, otherwise we use the default
+ * ones in the Switcher: they will return to the Host.
+ */
for (i = 0; i < ARRAY_SIZE(cpu->arch.idt); i++) {
const struct desc_struct *gidt = &cpu->arch.idt[i];
@@ -492,14 +581,16 @@ void copy_traps(const struct lg_cpu *cpu, struct desc_struct *idt,
if (!direct_trap(i))
continue;
- /* Only trap gates (type 15) can go direct to the Guest.
+ /*
+ * Only trap gates (type 15) can go direct to the Guest.
* Interrupt gates (type 14) disable interrupts as they are
* entered, which we never let the Guest do. Not present
* entries (type 0x0) also can't go direct, of course.
*
* If it can't go direct, we still need to copy the priv. level:
* they might want to give userspace access to a software
- * interrupt. */
+ * interrupt.
+ */
if (idt_type(gidt->a, gidt->b) == 0xF)
idt[i] = *gidt;
else
@@ -518,7 +609,8 @@ void copy_traps(const struct lg_cpu *cpu, struct desc_struct *idt,
* the next timer interrupt (in nanoseconds). We use the high-resolution timer
* infrastructure to set a callback at that time.
*
- * 0 means "turn off the clock". */
+ * 0 means "turn off the clock".
+ */
void guest_set_clockevent(struct lg_cpu *cpu, unsigned long delta)
{
ktime_t expires;
@@ -529,9 +621,11 @@ void guest_set_clockevent(struct lg_cpu *cpu, unsigned long delta)
return;
}
- /* We use wallclock time here, so the Guest might not be running for
+ /*
+ * We use wallclock time here, so the Guest might not be running for
* all the time between now and the timer interrupt it asked for. This
- * is almost always the right thing to do. */
+ * is almost always the right thing to do.
+ */
expires = ktime_add_ns(ktime_get_real(), delta);
hrtimer_start(&cpu->hrt, expires, HRTIMER_MODE_ABS);
}
diff --git a/drivers/lguest/lg.h b/drivers/lguest/lg.h
index 01c59192379..bc28745d05a 100644
--- a/drivers/lguest/lg.h
+++ b/drivers/lguest/lg.h
@@ -16,15 +16,13 @@
void free_pagetables(void);
int init_pagetables(struct page **switcher_page, unsigned int pages);
-struct pgdir
-{
+struct pgdir {
unsigned long gpgdir;
pgd_t *pgdir;
};
/* We have two pages shared with guests, per cpu. */
-struct lguest_pages
-{
+struct lguest_pages {
/* This is the stack page mapped rw in guest */
char spare[PAGE_SIZE - sizeof(struct lguest_regs)];
struct lguest_regs regs;
@@ -54,13 +52,13 @@ struct lg_cpu {
unsigned long pending_notify; /* pfn from LHCALL_NOTIFY */
- /* At end of a page shared mapped over lguest_pages in guest. */
+ /* At end of a page shared mapped over lguest_pages in guest. */
unsigned long regs_page;
struct lguest_regs *regs;
struct lguest_pages *last_pages;
- int cpu_pgd; /* which pgd this cpu is currently using */
+ int cpu_pgd; /* Which pgd this cpu is currently using */
/* If a hypercall was asked for, this points to the arguments. */
struct hcall_args *hcall;
@@ -89,15 +87,17 @@ struct lg_eventfd_map {
};
/* The private info the thread maintains about the guest. */
-struct lguest
-{
+struct lguest {
struct lguest_data __user *lguest_data;
struct lg_cpu cpus[NR_CPUS];
unsigned int nr_cpus;
u32 pfn_limit;
- /* This provides the offset to the base of guest-physical
- * memory in the Launcher. */
+
+ /*
+ * This provides the offset to the base of guest-physical memory in the
+ * Launcher.
+ */
void __user *mem_base;
unsigned long kernel_address;
@@ -122,11 +122,13 @@ bool lguest_address_ok(const struct lguest *lg,
void __lgread(struct lg_cpu *, void *, unsigned long, unsigned);
void __lgwrite(struct lg_cpu *, unsigned long, const void *, unsigned);
-/*H:035 Using memory-copy operations like that is usually inconvient, so we
+/*H:035
+ * Using memory-copy operations like that is usually inconvient, so we
* have the following helper macros which read and write a specific type (often
* an unsigned long).
*
- * This reads into a variable of the given type then returns that. */
+ * This reads into a variable of the given type then returns that.
+ */
#define lgread(cpu, addr, type) \
({ type _v; __lgread((cpu), &_v, (addr), sizeof(_v)); _v; })
@@ -140,9 +142,11 @@ void __lgwrite(struct lg_cpu *, unsigned long, const void *, unsigned);
int run_guest(struct lg_cpu *cpu, unsigned long __user *user);
-/* Helper macros to obtain the first 12 or the last 20 bits, this is only the
+/*
+ * Helper macros to obtain the first 12 or the last 20 bits, this is only the
* first step in the migration to the kernel types. pte_pfn is already defined
- * in the kernel. */
+ * in the kernel.
+ */
#define pgd_flags(x) (pgd_val(x) & ~PAGE_MASK)
#define pgd_pfn(x) (pgd_val(x) >> PAGE_SHIFT)
#define pmd_flags(x) (pmd_val(x) & ~PAGE_MASK)
diff --git a/drivers/lguest/lguest_device.c b/drivers/lguest/lguest_device.c
index e082cdac88b..b6200bc39b5 100644
--- a/drivers/lguest/lguest_device.c
+++ b/drivers/lguest/lguest_device.c
@@ -1,10 +1,12 @@
-/*P:050 Lguest guests use a very simple method to describe devices. It's a
+/*P:050
+ * Lguest guests use a very simple method to describe devices. It's a
* series of device descriptors contained just above the top of normal Guest
* memory.
*
* We use the standard "virtio" device infrastructure, which provides us with a
* console, a network and a block driver. Each one expects some configuration
- * information and a "virtqueue" or two to send and receive data. :*/
+ * information and a "virtqueue" or two to send and receive data.
+:*/
#include <linux/init.h>
#include <linux/bootmem.h>
#include <linux/lguest_launcher.h>
@@ -20,8 +22,10 @@
/* The pointer to our (page) of device descriptions. */
static void *lguest_devices;
-/* For Guests, device memory can be used as normal memory, so we cast away the
- * __iomem to quieten sparse. */
+/*
+ * For Guests, device memory can be used as normal memory, so we cast away the
+ * __iomem to quieten sparse.
+ */
static inline void *lguest_map(unsigned long phys_addr, unsigned long pages)
{
return (__force void *)ioremap_cache(phys_addr, PAGE_SIZE*pages);
@@ -32,8 +36,10 @@ static inline void lguest_unmap(void *addr)
iounmap((__force void __iomem *)addr);
}
-/*D:100 Each lguest device is just a virtio device plus a pointer to its entry
- * in the lguest_devices page. */
+/*D:100
+ * Each lguest device is just a virtio device plus a pointer to its entry
+ * in the lguest_devices page.
+ */
struct lguest_device {
struct virtio_device vdev;
@@ -41,9 +47,11 @@ struct lguest_device {
struct lguest_device_desc *desc;
};
-/* Since the virtio infrastructure hands us a pointer to the virtio_device all
+/*
+ * Since the virtio infrastructure hands us a pointer to the virtio_device all
* the time, it helps to have a curt macro to get a pointer to the struct
- * lguest_device it's enclosed in. */
+ * lguest_device it's enclosed in.
+ */
#define to_lgdev(vd) container_of(vd, struct lguest_device, vdev)
/*D:130
@@ -55,7 +63,8 @@ struct lguest_device {
* the driver will look at them during setup.
*
* A convenient routine to return the device's virtqueue config array:
- * immediately after the descriptor. */
+ * immediately after the descriptor.
+ */
static struct lguest_vqconfig *lg_vq(const struct lguest_device_desc *desc)
{
return (void *)(desc + 1);
@@ -98,10 +107,12 @@ static u32 lg_get_features(struct virtio_device *vdev)
return features;
}
-/* The virtio core takes the features the Host offers, and copies the
- * ones supported by the driver into the vdev->features array. Once
- * that's all sorted out, this routine is called so we can tell the
- * Host which features we understand and accept. */
+/*
+ * The virtio core takes the features the Host offers, and copies the ones
+ * supported by the driver into the vdev->features array. Once that's all
+ * sorted out, this routine is called so we can tell the Host which features we
+ * understand and accept.
+ */
static void lg_finalize_features(struct virtio_device *vdev)
{
unsigned int i, bits;
@@ -112,10 +123,11 @@ static void lg_finalize_features(struct virtio_device *vdev)
/* Give virtio_ring a chance to accept features. */
vring_transport_features(vdev);
- /* The vdev->feature array is a Linux bitmask: this isn't the
- * same as a the simple array of bits used by lguest devices
- * for features. So we do this slow, manual conversion which is
- * completely general. */
+ /*
+ * The vdev->feature array is a Linux bitmask: this isn't the same as a
+ * the simple array of bits used by lguest devices for features. So we
+ * do this slow, manual conversion which is completely general.
+ */
memset(out_features, 0, desc->feature_len);
bits = min_t(unsigned, desc->feature_len, sizeof(vdev->features)) * 8;
for (i = 0; i < bits; i++) {
@@ -146,15 +158,19 @@ static void lg_set(struct virtio_device *vdev, unsigned int offset,
memcpy(lg_config(desc) + offset, buf, len);
}
-/* The operations to get and set the status word just access the status field
- * of the device descriptor. */
+/*
+ * The operations to get and set the status word just access the status field
+ * of the device descriptor.
+ */
static u8 lg_get_status(struct virtio_device *vdev)
{
return to_lgdev(vdev)->desc->status;
}
-/* To notify on status updates, we (ab)use the NOTIFY hypercall, with the
- * descriptor address of the device. A zero status means "reset". */
+/*
+ * To notify on status updates, we (ab)use the NOTIFY hypercall, with the
+ * descriptor address of the device. A zero status means "reset".
+ */
static void set_status(struct virtio_device *vdev, u8 status)
{
unsigned long offset = (void *)to_lgdev(vdev)->desc - lguest_devices;
@@ -191,8 +207,7 @@ static void lg_reset(struct virtio_device *vdev)
*/
/*D:140 This is the information we remember about each virtqueue. */
-struct lguest_vq_info
-{
+struct lguest_vq_info {
/* A copy of the information contained in the device config. */
struct lguest_vqconfig config;
@@ -200,13 +215,17 @@ struct lguest_vq_info
void *pages;
};
-/* When the virtio_ring code wants to prod the Host, it calls us here and we
+/*
+ * When the virtio_ring code wants to prod the Host, it calls us here and we
* make a hypercall. We hand the physical address of the virtqueue so the Host
- * knows which virtqueue we're talking about. */
+ * knows which virtqueue we're talking about.
+ */
static void lg_notify(struct virtqueue *vq)
{
- /* We store our virtqueue information in the "priv" pointer of the
- * virtqueue structure. */
+ /*
+ * We store our virtqueue information in the "priv" pointer of the
+ * virtqueue structure.
+ */
struct lguest_vq_info *lvq = vq->priv;
kvm_hypercall1(LHCALL_NOTIFY, lvq->config.pfn << PAGE_SHIFT);
@@ -215,7 +234,8 @@ static void lg_notify(struct virtqueue *vq)
/* An extern declaration inside a C file is bad form. Don't do it. */
extern void lguest_setup_irq(unsigned int irq);
-/* This routine finds the first virtqueue described in the configuration of
+/*
+ * This routine finds the Nth virtqueue described in the configuration of
* this device and sets it up.
*
* This is kind of an ugly duckling. It'd be nicer to have a standard
@@ -223,9 +243,7 @@ extern void lguest_setup_irq(unsigned int irq);
* everyone wants to do it differently. The KVM coders want the Guest to
* allocate its own pages and tell the Host where they are, but for lguest it's
* simpler for the Host to simply tell us where the pages are.
- *
- * So we provide drivers with a "find the Nth virtqueue and set it up"
- * function. */
+ */
static struct virtqueue *lg_find_vq(struct virtio_device *vdev,
unsigned index,
void (*callback)(struct virtqueue *vq),
@@ -244,9 +262,11 @@ static struct virtqueue *lg_find_vq(struct virtio_device *vdev,
if (!lvq)
return ERR_PTR(-ENOMEM);
- /* Make a copy of the "struct lguest_vqconfig" entry, which sits after
+ /*
+ * Make a copy of the "struct lguest_vqconfig" entry, which sits after
* the descriptor. We need a copy because the config space might not
- * be aligned correctly. */
+ * be aligned correctly.
+ */
memcpy(&lvq->config, lg_vq(ldev->desc)+index, sizeof(lvq->config));
printk("Mapping virtqueue %i addr %lx\n", index,
@@ -261,8 +281,10 @@ static struct virtqueue *lg_find_vq(struct virtio_device *vdev,
goto free_lvq;
}
- /* OK, tell virtio_ring.c to set up a virtqueue now we know its size
- * and we've got a pointer to its pages. */
+ /*
+ * OK, tell virtio_ring.c to set up a virtqueue now we know its size
+ * and we've got a pointer to its pages.
+ */
vq = vring_new_virtqueue(lvq->config.num, LGUEST_VRING_ALIGN,
vdev, lvq->pages, lg_notify, callback, name);
if (!vq) {
@@ -273,18 +295,23 @@ static struct virtqueue *lg_find_vq(struct virtio_device *vdev,
/* Make sure the interrupt is allocated. */
lguest_setup_irq(lvq->config.irq);
- /* Tell the interrupt for this virtqueue to go to the virtio_ring
- * interrupt handler. */
- /* FIXME: We used to have a flag for the Host to tell us we could use
+ /*
+ * Tell the interrupt for this virtqueue to go to the virtio_ring
+ * interrupt handler.
+ *
+ * FIXME: We used to have a flag for the Host to tell us we could use
* the interrupt as a source of randomness: it'd be nice to have that
- * back.. */
+ * back.
+ */
err = request_irq(lvq->config.irq, vring_interrupt, IRQF_SHARED,
dev_name(&vdev->dev), vq);
if (err)
goto destroy_vring;
- /* Last of all we hook up our 'struct lguest_vq_info" to the
- * virtqueue's priv pointer. */
+ /*
+ * Last of all we hook up our 'struct lguest_vq_info" to the
+ * virtqueue's priv pointer.
+ */
vq->priv = lvq;
return vq;
@@ -358,11 +385,14 @@ static struct virtio_config_ops lguest_config_ops = {
.del_vqs = lg_del_vqs,
};
-/* The root device for the lguest virtio devices. This makes them appear as
- * /sys/devices/lguest/0,1,2 not /sys/devices/0,1,2. */
+/*
+ * The root device for the lguest virtio devices. This makes them appear as
+ * /sys/devices/lguest/0,1,2 not /sys/devices/0,1,2.
+ */
static struct device *lguest_root;
-/*D:120 This is the core of the lguest bus: actually adding a new device.
+/*D:120
+ * This is the core of the lguest bus: actually adding a new device.
* It's a separate function because it's neater that way, and because an
* earlier version of the code supported hotplug and unplug. They were removed
* early on because they were never used.
@@ -371,14 +401,14 @@ static struct device *lguest_root;
*
* It's worth reading this carefully: we start with a pointer to the new device
* descriptor in the "lguest_devices" page, and the offset into the device
- * descriptor page so we can uniquely identify it if things go badly wrong. */
+ * descriptor page so we can uniquely identify it if things go badly wrong.
+ */
static void add_lguest_device(struct lguest_device_desc *d,
unsigned int offset)
{
struct lguest_device *ldev;
- /* Start with zeroed memory; Linux's device layer seems to count on
- * it. */
+ /* Start with zeroed memory; Linux's device layer counts on it. */
ldev = kzalloc(sizeof(*ldev), GFP_KERNEL);
if (!ldev) {
printk(KERN_EMERG "Cannot allocate lguest dev %u type %u\n",
@@ -388,17 +418,25 @@ static void add_lguest_device(struct lguest_device_desc *d,
/* This devices' parent is the lguest/ dir. */
ldev->vdev.dev.parent = lguest_root;
- /* We have a unique device index thanks to the dev_index counter. */
+ /*
+ * The device type comes straight from the descriptor. There's also a
+ * device vendor field in the virtio_device struct, which we leave as
+ * 0.
+ */
ldev->vdev.id.device = d->type;
- /* We have a simple set of routines for querying the device's
- * configuration information and setting its status. */
+ /*
+ * We have a simple set of routines for querying the device's
+ * configuration information and setting its status.
+ */
ldev->vdev.config = &lguest_config_ops;
/* And we remember the device's descriptor for lguest_config_ops. */
ldev->desc = d;
- /* register_virtio_device() sets up the generic fields for the struct
+ /*
+ * register_virtio_device() sets up the generic fields for the struct
* virtio_device and calls device_register(). This makes the bus
- * infrastructure look for a matching driver. */
+ * infrastructure look for a matching driver.
+ */
if (register_virtio_device(&ldev->vdev) != 0) {
printk(KERN_ERR "Failed to register lguest dev %u type %u\n",
offset, d->type);
@@ -406,8 +444,10 @@ static void add_lguest_device(struct lguest_device_desc *d,
}
}
-/*D:110 scan_devices() simply iterates through the device page. The type 0 is
- * reserved to mean "end of devices". */
+/*D:110
+ * scan_devices() simply iterates through the device page. The type 0 is
+ * reserved to mean "end of devices".
+ */
static void scan_devices(void)
{
unsigned int i;
@@ -426,7 +466,8 @@ static void scan_devices(void)
}
}
-/*D:105 Fairly early in boot, lguest_devices_init() is called to set up the
+/*D:105
+ * Fairly early in boot, lguest_devices_init() is called to set up the
* lguest device infrastructure. We check that we are a Guest by checking
* pv_info.name: there are other ways of checking, but this seems most
* obvious to me.
@@ -437,7 +478,8 @@ static void scan_devices(void)
* correct sysfs incantation).
*
* Finally we call scan_devices() which adds all the devices found in the
- * lguest_devices page. */
+ * lguest_devices page.
+ */
static int __init lguest_devices_init(void)
{
if (strcmp(pv_info.name, "lguest") != 0)
@@ -456,11 +498,13 @@ static int __init lguest_devices_init(void)
/* We do this after core stuff, but before the drivers. */
postcore_initcall(lguest_devices_init);
-/*D:150 At this point in the journey we used to now wade through the lguest
+/*D:150
+ * At this point in the journey we used to now wade through the lguest
* devices themselves: net, block and console. Since they're all now virtio
* devices rather than lguest-specific, I've decided to ignore them. Mostly,
* they're kind of boring. But this does mean you'll never experience the
* thrill of reading the forbidden love scene buried deep in the block driver.
*
* "make Launcher" beckons, where we answer questions like "Where do Guests
- * come from?", and "What do you do when someone asks for optimization?". */
+ * come from?", and "What do you do when someone asks for optimization?".
+ */
diff --git a/drivers/lguest/lguest_user.c b/drivers/lguest/lguest_user.c
index 9f9a2953b38..b4d3f7ca554 100644
--- a/drivers/lguest/lguest_user.c
+++ b/drivers/lguest/lguest_user.c
@@ -1,8 +1,9 @@
/*P:200 This contains all the /dev/lguest code, whereby the userspace launcher
* controls and communicates with the Guest. For example, the first write will
- * tell us the Guest's memory layout, pagetable, entry point and kernel address
- * offset. A read will run the Guest until something happens, such as a signal
- * or the Guest doing a NOTIFY out to the Launcher. :*/
+ * tell us the Guest's memory layout and entry point. A read will run the
+ * Guest until something happens, such as a signal or the Guest doing a NOTIFY
+ * out to the Launcher.
+:*/
#include <linux/uaccess.h>
#include <linux/miscdevice.h>
#include <linux/fs.h>
@@ -11,14 +12,41 @@
#include <linux/file.h>
#include "lg.h"
+/*L:056
+ * Before we move on, let's jump ahead and look at what the kernel does when
+ * it needs to look up the eventfds. That will complete our picture of how we
+ * use RCU.
+ *
+ * The notification value is in cpu->pending_notify: we return true if it went
+ * to an eventfd.
+ */
bool send_notify_to_eventfd(struct lg_cpu *cpu)
{
unsigned int i;
struct lg_eventfd_map *map;
- /* lg->eventfds is RCU-protected */
+ /*
+ * This "rcu_read_lock()" helps track when someone is still looking at
+ * the (RCU-using) eventfds array. It's not actually a lock at all;
+ * indeed it's a noop in many configurations. (You didn't expect me to
+ * explain all the RCU secrets here, did you?)
+ */
rcu_read_lock();
+ /*
+ * rcu_dereference is the counter-side of rcu_assign_pointer(); it
+ * makes sure we don't access the memory pointed to by
+ * cpu->lg->eventfds before cpu->lg->eventfds is set. Sounds crazy,
+ * but Alpha allows this! Paul McKenney points out that a really
+ * aggressive compiler could have the same effect:
+ * http://lists.ozlabs.org/pipermail/lguest/2009-July/001560.html
+ *
+ * So play safe, use rcu_dereference to get the rcu-protected pointer:
+ */
map = rcu_dereference(cpu->lg->eventfds);
+ /*
+ * Simple array search: even if they add an eventfd while we do this,
+ * we'll continue to use the old array and just won't see the new one.
+ */
for (i = 0; i < map->num; i++) {
if (map->map[i].addr == cpu->pending_notify) {
eventfd_signal(map->map[i].event, 1);
@@ -26,19 +54,50 @@ bool send_notify_to_eventfd(struct lg_cpu *cpu)
break;
}
}
+ /* We're done with the rcu-protected variable cpu->lg->eventfds. */
rcu_read_unlock();
+
+ /* If we cleared the notification, it's because we found a match. */
return cpu->pending_notify == 0;
}
+/*L:055
+ * One of the more tricksy tricks in the Linux Kernel is a technique called
+ * Read Copy Update. Since one point of lguest is to teach lguest journeyers
+ * about kernel coding, I use it here. (In case you're curious, other purposes
+ * include learning about virtualization and instilling a deep appreciation for
+ * simplicity and puppies).
+ *
+ * We keep a simple array which maps LHCALL_NOTIFY values to eventfds, but we
+ * add new eventfds without ever blocking readers from accessing the array.
+ * The current Launcher only does this during boot, so that never happens. But
+ * Read Copy Update is cool, and adding a lock risks damaging even more puppies
+ * than this code does.
+ *
+ * We allocate a brand new one-larger array, copy the old one and add our new
+ * element. Then we make the lg eventfd pointer point to the new array.
+ * That's the easy part: now we need to free the old one, but we need to make
+ * sure no slow CPU somewhere is still looking at it. That's what
+ * synchronize_rcu does for us: waits until every CPU has indicated that it has
+ * moved on to know it's no longer using the old one.
+ *
+ * If that's unclear, see http://en.wikipedia.org/wiki/Read-copy-update.
+ */
static int add_eventfd(struct lguest *lg, unsigned long addr, int fd)
{
struct lg_eventfd_map *new, *old = lg->eventfds;
+ /*
+ * We don't allow notifications on value 0 anyway (pending_notify of
+ * 0 means "nothing pending").
+ */
if (!addr)
return -EINVAL;
- /* Replace the old array with the new one, carefully: others can
- * be accessing it at the same time */
+ /*
+ * Replace the old array with the new one, carefully: others can
+ * be accessing it at the same time.
+ */
new = kmalloc(sizeof(*new) + sizeof(new->map[0]) * (old->num + 1),
GFP_KERNEL);
if (!new)
@@ -52,22 +111,41 @@ static int add_eventfd(struct lguest *lg, unsigned long addr, int fd)
new->map[new->num].addr = addr;
new->map[new->num].event = eventfd_ctx_fdget(fd);
if (IS_ERR(new->map[new->num].event)) {
+ int err = PTR_ERR(new->map[new->num].event);
kfree(new);
- return PTR_ERR(new->map[new->num].event);
+ return err;
}
new->num++;
- /* Now put new one in place. */
+ /*
+ * Now put new one in place: rcu_assign_pointer() is a fancy way of
+ * doing "lg->eventfds = new", but it uses memory barriers to make
+ * absolutely sure that the contents of "new" written above is nailed
+ * down before we actually do the assignment.
+ *
+ * We have to think about these kinds of things when we're operating on
+ * live data without locks.
+ */
rcu_assign_pointer(lg->eventfds, new);
- /* We're not in a big hurry. Wait until noone's looking at old
- * version, then delete it. */
+ /*
+ * We're not in a big hurry. Wait until noone's looking at old
+ * version, then free it.
+ */
synchronize_rcu();
kfree(old);
return 0;
}
+/*L:052
+ * Receiving notifications from the Guest is usually done by attaching a
+ * particular LHCALL_NOTIFY value to an event filedescriptor. The eventfd will
+ * become readable when the Guest does an LHCALL_NOTIFY with that value.
+ *
+ * This is really convenient for processing each virtqueue in a separate
+ * thread.
+ */
static int attach_eventfd(struct lguest *lg, const unsigned long __user *input)
{
unsigned long addr, fd;
@@ -79,15 +157,22 @@ static int attach_eventfd(struct lguest *lg, const unsigned long __user *input)
if (get_user(fd, input) != 0)
return -EFAULT;
+ /*
+ * Just make sure two callers don't add eventfds at once. We really
+ * only need to lock against callers adding to the same Guest, so using
+ * the Big Lguest Lock is overkill. But this is setup, not a fast path.
+ */
mutex_lock(&lguest_lock);
err = add_eventfd(lg, addr, fd);
mutex_unlock(&lguest_lock);
- return 0;
+ return err;
}
-/*L:050 Sending an interrupt is done by writing LHREQ_IRQ and an interrupt
- * number to /dev/lguest. */
+/*L:050
+ * Sending an interrupt is done by writing LHREQ_IRQ and an interrupt
+ * number to /dev/lguest.
+ */
static int user_send_irq(struct lg_cpu *cpu, const unsigned long __user *input)
{
unsigned long irq;
@@ -97,12 +182,18 @@ static int user_send_irq(struct lg_cpu *cpu, const unsigned long __user *input)
if (irq >= LGUEST_IRQS)
return -EINVAL;
+ /*
+ * Next time the Guest runs, the core code will see if it can deliver
+ * this interrupt.
+ */
set_interrupt(cpu, irq);
return 0;
}
-/*L:040 Once our Guest is initialized, the Launcher makes it run by reading
- * from /dev/lguest. */
+/*L:040
+ * Once our Guest is initialized, the Launcher makes it run by reading
+ * from /dev/lguest.
+ */
static ssize_t read(struct file *file, char __user *user, size_t size,loff_t*o)
{
struct lguest *lg = file->private_data;
@@ -138,8 +229,10 @@ static ssize_t read(struct file *file, char __user *user, size_t size,loff_t*o)
return len;
}
- /* If we returned from read() last time because the Guest sent I/O,
- * clear the flag. */
+ /*
+ * If we returned from read() last time because the Guest sent I/O,
+ * clear the flag.
+ */
if (cpu->pending_notify)
cpu->pending_notify = 0;
@@ -147,8 +240,10 @@ static ssize_t read(struct file *file, char __user *user, size_t size,loff_t*o)
return run_guest(cpu, (unsigned long __user *)user);
}
-/*L:025 This actually initializes a CPU. For the moment, a Guest is only
- * uniprocessor, so "id" is always 0. */
+/*L:025
+ * This actually initializes a CPU. For the moment, a Guest is only
+ * uniprocessor, so "id" is always 0.
+ */
static int lg_cpu_start(struct lg_cpu *cpu, unsigned id, unsigned long start_ip)
{
/* We have a limited number the number of CPUs in the lguest struct. */
@@ -163,8 +258,10 @@ static int lg_cpu_start(struct lg_cpu *cpu, unsigned id, unsigned long start_ip)
/* Each CPU has a timer it can set. */
init_clockdev(cpu);
- /* We need a complete page for the Guest registers: they are accessible
- * to the Guest and we can only grant it access to whole pages. */
+ /*
+ * We need a complete page for the Guest registers: they are accessible
+ * to the Guest and we can only grant it access to whole pages.
+ */
cpu->regs_page = get_zeroed_page(GFP_KERNEL);
if (!cpu->regs_page)
return -ENOMEM;
@@ -172,29 +269,38 @@ static int lg_cpu_start(struct lg_cpu *cpu, unsigned id, unsigned long start_ip)
/* We actually put the registers at the bottom of the page. */
cpu->regs = (void *)cpu->regs_page + PAGE_SIZE - sizeof(*cpu->regs);
- /* Now we initialize the Guest's registers, handing it the start
- * address. */
+ /*
+ * Now we initialize the Guest's registers, handing it the start
+ * address.
+ */
lguest_arch_setup_regs(cpu, start_ip);
- /* We keep a pointer to the Launcher task (ie. current task) for when
- * other Guests want to wake this one (eg. console input). */
+ /*
+ * We keep a pointer to the Launcher task (ie. current task) for when
+ * other Guests want to wake this one (eg. console input).
+ */
cpu->tsk = current;
- /* We need to keep a pointer to the Launcher's memory map, because if
+ /*
+ * We need to keep a pointer to the Launcher's memory map, because if
* the Launcher dies we need to clean it up. If we don't keep a
- * reference, it is destroyed before close() is called. */
+ * reference, it is destroyed before close() is called.
+ */
cpu->mm = get_task_mm(cpu->tsk);
- /* We remember which CPU's pages this Guest used last, for optimization
- * when the same Guest runs on the same CPU twice. */
+ /*
+ * We remember which CPU's pages this Guest used last, for optimization
+ * when the same Guest runs on the same CPU twice.
+ */
cpu->last_pages = NULL;
/* No error == success. */
return 0;
}
-/*L:020 The initialization write supplies 3 pointer sized (32 or 64 bit)
- * values (in addition to the LHREQ_INITIALIZE value). These are:
+/*L:020
+ * The initialization write supplies 3 pointer sized (32 or 64 bit) values (in
+ * addition to the LHREQ_INITIALIZE value). These are:
*
* base: The start of the Guest-physical memory inside the Launcher memory.
*
@@ -206,14 +312,15 @@ static int lg_cpu_start(struct lg_cpu *cpu, unsigned id, unsigned long start_ip)
*/
static int initialize(struct file *file, const unsigned long __user *input)
{
- /* "struct lguest" contains everything we (the Host) know about a
- * Guest. */
+ /* "struct lguest" contains all we (the Host) know about a Guest. */
struct lguest *lg;
int err;
unsigned long args[3];
- /* We grab the Big Lguest lock, which protects against multiple
- * simultaneous initializations. */
+ /*
+ * We grab the Big Lguest lock, which protects against multiple
+ * simultaneous initializations.
+ */
mutex_lock(&lguest_lock);
/* You can't initialize twice! Close the device and start again... */
if (file->private_data) {
@@ -248,8 +355,10 @@ static int initialize(struct file *file, const unsigned long __user *input)
if (err)
goto free_eventfds;
- /* Initialize the Guest's shadow page tables, using the toplevel
- * address the Launcher gave us. This allocates memory, so can fail. */
+ /*
+ * Initialize the Guest's shadow page tables, using the toplevel
+ * address the Launcher gave us. This allocates memory, so can fail.
+ */
err = init_guest_pagetable(lg);
if (err)
goto free_regs;
@@ -274,20 +383,24 @@ unlock:
return err;
}
-/*L:010 The first operation the Launcher does must be a write. All writes
+/*L:010
+ * The first operation the Launcher does must be a write. All writes
* start with an unsigned long number: for the first write this must be
* LHREQ_INITIALIZE to set up the Guest. After that the Launcher can use
- * writes of other values to send interrupts.
+ * writes of other values to send interrupts or set up receipt of notifications.
*
* Note that we overload the "offset" in the /dev/lguest file to indicate what
- * CPU number we're dealing with. Currently this is always 0, since we only
+ * CPU number we're dealing with. Currently this is always 0 since we only
* support uniprocessor Guests, but you can see the beginnings of SMP support
- * here. */
+ * here.
+ */
static ssize_t write(struct file *file, const char __user *in,
size_t size, loff_t *off)
{
- /* Once the Guest is initialized, we hold the "struct lguest" in the
- * file private data. */
+ /*
+ * Once the Guest is initialized, we hold the "struct lguest" in the
+ * file private data.
+ */
struct lguest *lg = file->private_data;
const unsigned long __user *input = (const unsigned long __user *)in;
unsigned long req;
@@ -322,13 +435,15 @@ static ssize_t write(struct file *file, const char __user *in,
}
}
-/*L:060 The final piece of interface code is the close() routine. It reverses
+/*L:060
+ * The final piece of interface code is the close() routine. It reverses
* everything done in initialize(). This is usually called because the
* Launcher exited.
*
* Note that the close routine returns 0 or a negative error number: it can't
* really fail, but it can whine. I blame Sun for this wart, and K&R C for
- * letting them do it. :*/
+ * letting them do it.
+:*/
static int close(struct inode *inode, struct file *file)
{
struct lguest *lg = file->private_data;
@@ -338,8 +453,10 @@ static int close(struct inode *inode, struct file *file)
if (!lg)
return 0;
- /* We need the big lock, to protect from inter-guest I/O and other
- * Launchers initializing guests. */
+ /*
+ * We need the big lock, to protect from inter-guest I/O and other
+ * Launchers initializing guests.
+ */
mutex_lock(&lguest_lock);
/* Free up the shadow page tables for the Guest. */
@@ -350,8 +467,10 @@ static int close(struct inode *inode, struct file *file)
hrtimer_cancel(&lg->cpus[i].hrt);
/* We can free up the register page we allocated. */
free_page(lg->cpus[i].regs_page);
- /* Now all the memory cleanups are done, it's safe to release
- * the Launcher's memory management structure. */
+ /*
+ * Now all the memory cleanups are done, it's safe to release
+ * the Launcher's memory management structure.
+ */
mmput(lg->cpus[i].mm);
}
@@ -360,8 +479,10 @@ static int close(struct inode *inode, struct file *file)
eventfd_ctx_put(lg->eventfds->map[i].event);
kfree(lg->eventfds);
- /* If lg->dead doesn't contain an error code it will be NULL or a
- * kmalloc()ed string, either of which is ok to hand to kfree(). */
+ /*
+ * If lg->dead doesn't contain an error code it will be NULL or a
+ * kmalloc()ed string, either of which is ok to hand to kfree().
+ */
if (!IS_ERR(lg->dead))
kfree(lg->dead);
/* Free the memory allocated to the lguest_struct */
@@ -385,7 +506,8 @@ static int close(struct inode *inode, struct file *file)
*
* We begin our understanding with the Host kernel interface which the Launcher
* uses: reading and writing a character device called /dev/lguest. All the
- * work happens in the read(), write() and close() routines: */
+ * work happens in the read(), write() and close() routines:
+ */
static struct file_operations lguest_fops = {
.owner = THIS_MODULE,
.release = close,
@@ -393,8 +515,10 @@ static struct file_operations lguest_fops = {
.read = read,
};
-/* This is a textbook example of a "misc" character device. Populate a "struct
- * miscdevice" and register it with misc_register(). */
+/*
+ * This is a textbook example of a "misc" character device. Populate a "struct
+ * miscdevice" and register it with misc_register().
+ */
static struct miscdevice lguest_dev = {
.minor = MISC_DYNAMIC_MINOR,
.name = "lguest",
diff --git a/drivers/lguest/page_tables.c b/drivers/lguest/page_tables.c
index a6fe1abda24..a8d0aee3bc0 100644
--- a/drivers/lguest/page_tables.c
+++ b/drivers/lguest/page_tables.c
@@ -1,9 +1,11 @@
-/*P:700 The pagetable code, on the other hand, still shows the scars of
+/*P:700
+ * The pagetable code, on the other hand, still shows the scars of
* previous encounters. It's functional, and as neat as it can be in the
* circumstances, but be wary, for these things are subtle and break easily.
* The Guest provides a virtual to physical mapping, but we can neither trust
* it nor use it: we verify and convert it here then point the CPU to the
- * converted Guest pages when running the Guest. :*/
+ * converted Guest pages when running the Guest.
+:*/
/* Copyright (C) Rusty Russell IBM Corporation 2006.
* GPL v2 and any later version */
@@ -17,18 +19,20 @@
#include <asm/bootparam.h>
#include "lg.h"
-/*M:008 We hold reference to pages, which prevents them from being swapped.
+/*M:008
+ * We hold reference to pages, which prevents them from being swapped.
* It'd be nice to have a callback in the "struct mm_struct" when Linux wants
* to swap out. If we had this, and a shrinker callback to trim PTE pages, we
- * could probably consider launching Guests as non-root. :*/
+ * could probably consider launching Guests as non-root.
+:*/
/*H:300
* The Page Table Code
*
- * We use two-level page tables for the Guest. If you're not entirely
- * comfortable with virtual addresses, physical addresses and page tables then
- * I recommend you review arch/x86/lguest/boot.c's "Page Table Handling" (with
- * diagrams!).
+ * We use two-level page tables for the Guest, or three-level with PAE. If
+ * you're not entirely comfortable with virtual addresses, physical addresses
+ * and page tables then I recommend you review arch/x86/lguest/boot.c's "Page
+ * Table Handling" (with diagrams!).
*
* The Guest keeps page tables, but we maintain the actual ones here: these are
* called "shadow" page tables. Which is a very Guest-centric name: these are
@@ -45,16 +49,18 @@
* (v) Flushing (throwing away) page tables,
* (vi) Mapping the Switcher when the Guest is about to run,
* (vii) Setting up the page tables initially.
- :*/
+:*/
-
-/* 1024 entries in a page table page maps 1024 pages: 4MB. The Switcher is
- * conveniently placed at the top 4MB, so it uses a separate, complete PTE
- * page. */
+/*
+ * The Switcher uses the complete top PTE page. That's 1024 PTE entries (4MB)
+ * or 512 PTE entries with PAE (2MB).
+ */
#define SWITCHER_PGD_INDEX (PTRS_PER_PGD - 1)
-/* For PAE we need the PMD index as well. We use the last 2MB, so we
- * will need the last pmd entry of the last pmd page. */
+/*
+ * For PAE we need the PMD index as well. We use the last 2MB, so we
+ * will need the last pmd entry of the last pmd page.
+ */
#ifdef CONFIG_X86_PAE
#define SWITCHER_PMD_INDEX (PTRS_PER_PMD - 1)
#define RESERVE_MEM 2U
@@ -64,14 +70,18 @@
#define CHECK_GPGD_MASK _PAGE_TABLE
#endif
-/* We actually need a separate PTE page for each CPU. Remember that after the
+/*
+ * We actually need a separate PTE page for each CPU. Remember that after the
* Switcher code itself comes two pages for each CPU, and we don't want this
- * CPU's guest to see the pages of any other CPU. */
+ * CPU's guest to see the pages of any other CPU.
+ */
static DEFINE_PER_CPU(pte_t *, switcher_pte_pages);
#define switcher_pte_page(cpu) per_cpu(switcher_pte_pages, cpu)
-/*H:320 The page table code is curly enough to need helper functions to keep it
- * clear and clean.
+/*H:320
+ * The page table code is curly enough to need helper functions to keep it
+ * clear and clean. The kernel itself provides many of them; one advantage
+ * of insisting that the Guest and Host use the same CONFIG_PAE setting.
*
* There are two functions which return pointers to the shadow (aka "real")
* page tables.
@@ -79,7 +89,8 @@ static DEFINE_PER_CPU(pte_t *, switcher_pte_pages);
* spgd_addr() takes the virtual address and returns a pointer to the top-level
* page directory entry (PGD) for that address. Since we keep track of several
* page tables, the "i" argument tells us which one we're interested in (it's
- * usually the current one). */
+ * usually the current one).
+ */
static pgd_t *spgd_addr(struct lg_cpu *cpu, u32 i, unsigned long vaddr)
{
unsigned int index = pgd_index(vaddr);
@@ -96,9 +107,11 @@ static pgd_t *spgd_addr(struct lg_cpu *cpu, u32 i, unsigned long vaddr)
}
#ifdef CONFIG_X86_PAE
-/* This routine then takes the PGD entry given above, which contains the
+/*
+ * This routine then takes the PGD entry given above, which contains the
* address of the PMD page. It then returns a pointer to the PMD entry for the
- * given address. */
+ * given address.
+ */
static pmd_t *spmd_addr(struct lg_cpu *cpu, pgd_t spgd, unsigned long vaddr)
{
unsigned int index = pmd_index(vaddr);
@@ -119,9 +132,11 @@ static pmd_t *spmd_addr(struct lg_cpu *cpu, pgd_t spgd, unsigned long vaddr)
}
#endif
-/* This routine then takes the page directory entry returned above, which
+/*
+ * This routine then takes the page directory entry returned above, which
* contains the address of the page table entry (PTE) page. It then returns a
- * pointer to the PTE entry for the given address. */
+ * pointer to the PTE entry for the given address.
+ */
static pte_t *spte_addr(struct lg_cpu *cpu, pgd_t spgd, unsigned long vaddr)
{
#ifdef CONFIG_X86_PAE
@@ -139,8 +154,10 @@ static pte_t *spte_addr(struct lg_cpu *cpu, pgd_t spgd, unsigned long vaddr)
return &page[pte_index(vaddr)];
}
-/* These two functions just like the above two, except they access the Guest
- * page tables. Hence they return a Guest address. */
+/*
+ * These functions are just like the above two, except they access the Guest
+ * page tables. Hence they return a Guest address.
+ */
static unsigned long gpgd_addr(struct lg_cpu *cpu, unsigned long vaddr)
{
unsigned int index = vaddr >> (PGDIR_SHIFT);
@@ -148,6 +165,7 @@ static unsigned long gpgd_addr(struct lg_cpu *cpu, unsigned long vaddr)
}
#ifdef CONFIG_X86_PAE
+/* Follow the PGD to the PMD. */
static unsigned long gpmd_addr(pgd_t gpgd, unsigned long vaddr)
{
unsigned long gpage = pgd_pfn(gpgd) << PAGE_SHIFT;
@@ -155,6 +173,7 @@ static unsigned long gpmd_addr(pgd_t gpgd, unsigned long vaddr)
return gpage + pmd_index(vaddr) * sizeof(pmd_t);
}
+/* Follow the PMD to the PTE. */
static unsigned long gpte_addr(struct lg_cpu *cpu,
pmd_t gpmd, unsigned long vaddr)
{
@@ -164,6 +183,7 @@ static unsigned long gpte_addr(struct lg_cpu *cpu,
return gpage + pte_index(vaddr) * sizeof(pte_t);
}
#else
+/* Follow the PGD to the PTE (no mid-level for !PAE). */
static unsigned long gpte_addr(struct lg_cpu *cpu,
pgd_t gpgd, unsigned long vaddr)
{
@@ -175,17 +195,21 @@ static unsigned long gpte_addr(struct lg_cpu *cpu,
#endif
/*:*/
-/*M:014 get_pfn is slow: we could probably try to grab batches of pages here as
- * an optimization (ie. pre-faulting). :*/
+/*M:014
+ * get_pfn is slow: we could probably try to grab batches of pages here as
+ * an optimization (ie. pre-faulting).
+:*/
-/*H:350 This routine takes a page number given by the Guest and converts it to
+/*H:350
+ * This routine takes a page number given by the Guest and converts it to
* an actual, physical page number. It can fail for several reasons: the
* virtual address might not be mapped by the Launcher, the write flag is set
* and the page is read-only, or the write flag was set and the page was
* shared so had to be copied, but we ran out of memory.
*
* This holds a reference to the page, so release_pte() is careful to put that
- * back. */
+ * back.
+ */
static unsigned long get_pfn(unsigned long virtpfn, int write)
{
struct page *page;
@@ -198,33 +222,41 @@ static unsigned long get_pfn(unsigned long virtpfn, int write)
return -1UL;
}
-/*H:340 Converting a Guest page table entry to a shadow (ie. real) page table
+/*H:340
+ * Converting a Guest page table entry to a shadow (ie. real) page table
* entry can be a little tricky. The flags are (almost) the same, but the
* Guest PTE contains a virtual page number: the CPU needs the real page
- * number. */
+ * number.
+ */
static pte_t gpte_to_spte(struct lg_cpu *cpu, pte_t gpte, int write)
{
unsigned long pfn, base, flags;
- /* The Guest sets the global flag, because it thinks that it is using
+ /*
+ * The Guest sets the global flag, because it thinks that it is using
* PGE. We only told it to use PGE so it would tell us whether it was
* flushing a kernel mapping or a userspace mapping. We don't actually
- * use the global bit, so throw it away. */
+ * use the global bit, so throw it away.
+ */
flags = (pte_flags(gpte) & ~_PAGE_GLOBAL);
/* The Guest's pages are offset inside the Launcher. */
base = (unsigned long)cpu->lg->mem_base / PAGE_SIZE;
- /* We need a temporary "unsigned long" variable to hold the answer from
+ /*
+ * We need a temporary "unsigned long" variable to hold the answer from
* get_pfn(), because it returns 0xFFFFFFFF on failure, which wouldn't
* fit in spte.pfn. get_pfn() finds the real physical number of the
- * page, given the virtual number. */
+ * page, given the virtual number.
+ */
pfn = get_pfn(base + pte_pfn(gpte), write);
if (pfn == -1UL) {
kill_guest(cpu, "failed to get page %lu", pte_pfn(gpte));
- /* When we destroy the Guest, we'll go through the shadow page
+ /*
+ * When we destroy the Guest, we'll go through the shadow page
* tables and release_pte() them. Make sure we don't think
- * this one is valid! */
+ * this one is valid!
+ */
flags = 0;
}
/* Now we assemble our shadow PTE from the page number and flags. */
@@ -234,8 +266,10 @@ static pte_t gpte_to_spte(struct lg_cpu *cpu, pte_t gpte, int write)
/*H:460 And to complete the chain, release_pte() looks like this: */
static void release_pte(pte_t pte)
{
- /* Remember that get_user_pages_fast() took a reference to the page, in
- * get_pfn()? We have to put it back now. */
+ /*
+ * Remember that get_user_pages_fast() took a reference to the page, in
+ * get_pfn()? We have to put it back now.
+ */
if (pte_flags(pte) & _PAGE_PRESENT)
put_page(pte_page(pte));
}
@@ -273,7 +307,8 @@ static void check_gpmd(struct lg_cpu *cpu, pmd_t gpmd)
* and return to the Guest without it knowing.
*
* If we fixed up the fault (ie. we mapped the address), this routine returns
- * true. Otherwise, it was a real fault and we need to tell the Guest. */
+ * true. Otherwise, it was a real fault and we need to tell the Guest.
+ */
bool demand_page(struct lg_cpu *cpu, unsigned long vaddr, int errcode)
{
pgd_t gpgd;
@@ -282,6 +317,7 @@ bool demand_page(struct lg_cpu *cpu, unsigned long vaddr, int errcode)
pte_t gpte;
pte_t *spte;
+ /* Mid level for PAE. */
#ifdef CONFIG_X86_PAE
pmd_t *spmd;
pmd_t gpmd;
@@ -298,22 +334,26 @@ bool demand_page(struct lg_cpu *cpu, unsigned long vaddr, int errcode)
if (!(pgd_flags(*spgd) & _PAGE_PRESENT)) {
/* No shadow entry: allocate a new shadow PTE page. */
unsigned long ptepage = get_zeroed_page(GFP_KERNEL);
- /* This is not really the Guest's fault, but killing it is
- * simple for this corner case. */
+ /*
+ * This is not really the Guest's fault, but killing it is
+ * simple for this corner case.
+ */
if (!ptepage) {
kill_guest(cpu, "out of memory allocating pte page");
return false;
}
/* We check that the Guest pgd is OK. */
check_gpgd(cpu, gpgd);
- /* And we copy the flags to the shadow PGD entry. The page
- * number in the shadow PGD is the page we just allocated. */
+ /*
+ * And we copy the flags to the shadow PGD entry. The page
+ * number in the shadow PGD is the page we just allocated.
+ */
set_pgd(spgd, __pgd(__pa(ptepage) | pgd_flags(gpgd)));
}
#ifdef CONFIG_X86_PAE
gpmd = lgread(cpu, gpmd_addr(gpgd, vaddr), pmd_t);
- /* middle level not present? We can't map it in. */
+ /* Middle level not present? We can't map it in. */
if (!(pmd_flags(gpmd) & _PAGE_PRESENT))
return false;
@@ -324,8 +364,10 @@ bool demand_page(struct lg_cpu *cpu, unsigned long vaddr, int errcode)
/* No shadow entry: allocate a new shadow PTE page. */
unsigned long ptepage = get_zeroed_page(GFP_KERNEL);
- /* This is not really the Guest's fault, but killing it is
- * simple for this corner case. */
+ /*
+ * This is not really the Guest's fault, but killing it is
+ * simple for this corner case.
+ */
if (!ptepage) {
kill_guest(cpu, "out of memory allocating pte page");
return false;
@@ -334,27 +376,37 @@ bool demand_page(struct lg_cpu *cpu, unsigned long vaddr, int errcode)
/* We check that the Guest pmd is OK. */
check_gpmd(cpu, gpmd);
- /* And we copy the flags to the shadow PMD entry. The page
- * number in the shadow PMD is the page we just allocated. */
+ /*
+ * And we copy the flags to the shadow PMD entry. The page
+ * number in the shadow PMD is the page we just allocated.
+ */
native_set_pmd(spmd, __pmd(__pa(ptepage) | pmd_flags(gpmd)));
}
- /* OK, now we look at the lower level in the Guest page table: keep its
- * address, because we might update it later. */
+ /*
+ * OK, now we look at the lower level in the Guest page table: keep its
+ * address, because we might update it later.
+ */
gpte_ptr = gpte_addr(cpu, gpmd, vaddr);
#else
- /* OK, now we look at the lower level in the Guest page table: keep its
- * address, because we might update it later. */
+ /*
+ * OK, now we look at the lower level in the Guest page table: keep its
+ * address, because we might update it later.
+ */
gpte_ptr = gpte_addr(cpu, gpgd, vaddr);
#endif
+
+ /* Read the actual PTE value. */
gpte = lgread(cpu, gpte_ptr, pte_t);
/* If this page isn't in the Guest page tables, we can't page it in. */
if (!(pte_flags(gpte) & _PAGE_PRESENT))
return false;
- /* Check they're not trying to write to a page the Guest wants
- * read-only (bit 2 of errcode == write). */
+ /*
+ * Check they're not trying to write to a page the Guest wants
+ * read-only (bit 2 of errcode == write).
+ */
if ((errcode & 2) && !(pte_flags(gpte) & _PAGE_RW))
return false;
@@ -362,8 +414,10 @@ bool demand_page(struct lg_cpu *cpu, unsigned long vaddr, int errcode)
if ((errcode & 4) && !(pte_flags(gpte) & _PAGE_USER))
return false;
- /* Check that the Guest PTE flags are OK, and the page number is below
- * the pfn_limit (ie. not mapping the Launcher binary). */
+ /*
+ * Check that the Guest PTE flags are OK, and the page number is below
+ * the pfn_limit (ie. not mapping the Launcher binary).
+ */
check_gpte(cpu, gpte);
/* Add the _PAGE_ACCESSED and (for a write) _PAGE_DIRTY flag */
@@ -373,29 +427,40 @@ bool demand_page(struct lg_cpu *cpu, unsigned long vaddr, int errcode)
/* Get the pointer to the shadow PTE entry we're going to set. */
spte = spte_addr(cpu, *spgd, vaddr);
- /* If there was a valid shadow PTE entry here before, we release it.
- * This can happen with a write to a previously read-only entry. */
+
+ /*
+ * If there was a valid shadow PTE entry here before, we release it.
+ * This can happen with a write to a previously read-only entry.
+ */
release_pte(*spte);
- /* If this is a write, we insist that the Guest page is writable (the
- * final arg to gpte_to_spte()). */
+ /*
+ * If this is a write, we insist that the Guest page is writable (the
+ * final arg to gpte_to_spte()).
+ */
if (pte_dirty(gpte))
*spte = gpte_to_spte(cpu, gpte, 1);
else
- /* If this is a read, don't set the "writable" bit in the page
+ /*
+ * If this is a read, don't set the "writable" bit in the page
* table entry, even if the Guest says it's writable. That way
* we will come back here when a write does actually occur, so
- * we can update the Guest's _PAGE_DIRTY flag. */
+ * we can update the Guest's _PAGE_DIRTY flag.
+ */
native_set_pte(spte, gpte_to_spte(cpu, pte_wrprotect(gpte), 0));
- /* Finally, we write the Guest PTE entry back: we've set the
- * _PAGE_ACCESSED and maybe the _PAGE_DIRTY flags. */
+ /*
+ * Finally, we write the Guest PTE entry back: we've set the
+ * _PAGE_ACCESSED and maybe the _PAGE_DIRTY flags.
+ */
lgwrite(cpu, gpte_ptr, pte_t, gpte);
- /* The fault is fixed, the page table is populated, the mapping
+ /*
+ * The fault is fixed, the page table is populated, the mapping
* manipulated, the result returned and the code complete. A small
* delay and a trace of alliteration are the only indications the Guest
- * has that a page fault occurred at all. */
+ * has that a page fault occurred at all.
+ */
return true;
}
@@ -408,7 +473,8 @@ bool demand_page(struct lg_cpu *cpu, unsigned long vaddr, int errcode)
* mapped, so it's overkill.
*
* This is a quick version which answers the question: is this virtual address
- * mapped by the shadow page tables, and is it writable? */
+ * mapped by the shadow page tables, and is it writable?
+ */
static bool page_writable(struct lg_cpu *cpu, unsigned long vaddr)
{
pgd_t *spgd;
@@ -428,21 +494,26 @@ static bool page_writable(struct lg_cpu *cpu, unsigned long vaddr)
return false;
#endif
- /* Check the flags on the pte entry itself: it must be present and
- * writable. */
+ /*
+ * Check the flags on the pte entry itself: it must be present and
+ * writable.
+ */
flags = pte_flags(*(spte_addr(cpu, *spgd, vaddr)));
return (flags & (_PAGE_PRESENT|_PAGE_RW)) == (_PAGE_PRESENT|_PAGE_RW);
}
-/* So, when pin_stack_pages() asks us to pin a page, we check if it's already
+/*
+ * So, when pin_stack_pages() asks us to pin a page, we check if it's already
* in the page tables, and if not, we call demand_page() with error code 2
- * (meaning "write"). */
+ * (meaning "write").
+ */
void pin_page(struct lg_cpu *cpu, unsigned long vaddr)
{
if (!page_writable(cpu, vaddr) && !demand_page(cpu, vaddr, 2))
kill_guest(cpu, "bad stack page %#lx", vaddr);
}
+/*:*/
#ifdef CONFIG_X86_PAE
static void release_pmd(pmd_t *spmd)
@@ -479,15 +550,21 @@ static void release_pgd(pgd_t *spgd)
}
#else /* !CONFIG_X86_PAE */
-/*H:450 If we chase down the release_pgd() code, it looks like this: */
+/*H:450
+ * If we chase down the release_pgd() code, the non-PAE version looks like
+ * this. The PAE version is almost identical, but instead of calling
+ * release_pte it calls release_pmd(), which looks much like this.
+ */
static void release_pgd(pgd_t *spgd)
{
/* If the entry's not present, there's nothing to release. */
if (pgd_flags(*spgd) & _PAGE_PRESENT) {
unsigned int i;
- /* Converting the pfn to find the actual PTE page is easy: turn
+ /*
+ * Converting the pfn to find the actual PTE page is easy: turn
* the page number into a physical address, then convert to a
- * virtual address (easy for kernel pages like this one). */
+ * virtual address (easy for kernel pages like this one).
+ */
pte_t *ptepage = __va(pgd_pfn(*spgd) << PAGE_SHIFT);
/* For each entry in the page, we might need to release it. */
for (i = 0; i < PTRS_PER_PTE; i++)
@@ -499,9 +576,12 @@ static void release_pgd(pgd_t *spgd)
}
}
#endif
-/*H:445 We saw flush_user_mappings() twice: once from the flush_user_mappings()
+
+/*H:445
+ * We saw flush_user_mappings() twice: once from the flush_user_mappings()
* hypercall and once in new_pgdir() when we re-used a top-level pgdir page.
- * It simply releases every PTE page from 0 up to the Guest's kernel address. */
+ * It simply releases every PTE page from 0 up to the Guest's kernel address.
+ */
static void flush_user_mappings(struct lguest *lg, int idx)
{
unsigned int i;
@@ -510,10 +590,12 @@ static void flush_user_mappings(struct lguest *lg, int idx)
release_pgd(lg->pgdirs[idx].pgdir + i);
}
-/*H:440 (v) Flushing (throwing away) page tables,
+/*H:440
+ * (v) Flushing (throwing away) page tables,
*
* The Guest has a hypercall to throw away the page tables: it's used when a
- * large number of mappings have been changed. */
+ * large number of mappings have been changed.
+ */
void guest_pagetable_flush_user(struct lg_cpu *cpu)
{
/* Drop the userspace part of the current page table. */
@@ -551,9 +633,11 @@ unsigned long guest_pa(struct lg_cpu *cpu, unsigned long vaddr)
return pte_pfn(gpte) * PAGE_SIZE | (vaddr & ~PAGE_MASK);
}
-/* We keep several page tables. This is a simple routine to find the page
+/*
+ * We keep several page tables. This is a simple routine to find the page
* table (if any) corresponding to this top-level address the Guest has given
- * us. */
+ * us.
+ */
static unsigned int find_pgdir(struct lguest *lg, unsigned long pgtable)
{
unsigned int i;
@@ -563,9 +647,11 @@ static unsigned int find_pgdir(struct lguest *lg, unsigned long pgtable)
return i;
}
-/*H:435 And this is us, creating the new page directory. If we really do
+/*H:435
+ * And this is us, creating the new page directory. If we really do
* allocate a new one (and so the kernel parts are not there), we set
- * blank_pgdir. */
+ * blank_pgdir.
+ */
static unsigned int new_pgdir(struct lg_cpu *cpu,
unsigned long gpgdir,
int *blank_pgdir)
@@ -575,8 +661,10 @@ static unsigned int new_pgdir(struct lg_cpu *cpu,
pmd_t *pmd_table;
#endif
- /* We pick one entry at random to throw out. Choosing the Least
- * Recently Used might be better, but this is easy. */
+ /*
+ * We pick one entry at random to throw out. Choosing the Least
+ * Recently Used might be better, but this is easy.
+ */
next = random32() % ARRAY_SIZE(cpu->lg->pgdirs);
/* If it's never been allocated at all before, try now. */
if (!cpu->lg->pgdirs[next].pgdir) {
@@ -587,8 +675,10 @@ static unsigned int new_pgdir(struct lg_cpu *cpu,
next = cpu->cpu_pgd;
else {
#ifdef CONFIG_X86_PAE
- /* In PAE mode, allocate a pmd page and populate the
- * last pgd entry. */
+ /*
+ * In PAE mode, allocate a pmd page and populate the
+ * last pgd entry.
+ */
pmd_table = (pmd_t *)get_zeroed_page(GFP_KERNEL);
if (!pmd_table) {
free_page((long)cpu->lg->pgdirs[next].pgdir);
@@ -598,8 +688,10 @@ static unsigned int new_pgdir(struct lg_cpu *cpu,
set_pgd(cpu->lg->pgdirs[next].pgdir +
SWITCHER_PGD_INDEX,
__pgd(__pa(pmd_table) | _PAGE_PRESENT));
- /* This is a blank page, so there are no kernel
- * mappings: caller must map the stack! */
+ /*
+ * This is a blank page, so there are no kernel
+ * mappings: caller must map the stack!
+ */
*blank_pgdir = 1;
}
#else
@@ -615,19 +707,23 @@ static unsigned int new_pgdir(struct lg_cpu *cpu,
return next;
}
-/*H:430 (iv) Switching page tables
+/*H:430
+ * (iv) Switching page tables
*
* Now we've seen all the page table setting and manipulation, let's see
* what happens when the Guest changes page tables (ie. changes the top-level
- * pgdir). This occurs on almost every context switch. */
+ * pgdir). This occurs on almost every context switch.
+ */
void guest_new_pagetable(struct lg_cpu *cpu, unsigned long pgtable)
{
int newpgdir, repin = 0;
/* Look to see if we have this one already. */
newpgdir = find_pgdir(cpu->lg, pgtable);
- /* If not, we allocate or mug an existing one: if it's a fresh one,
- * repin gets set to 1. */
+ /*
+ * If not, we allocate or mug an existing one: if it's a fresh one,
+ * repin gets set to 1.
+ */
if (newpgdir == ARRAY_SIZE(cpu->lg->pgdirs))
newpgdir = new_pgdir(cpu, pgtable, &repin);
/* Change the current pgd index to the new one. */
@@ -637,9 +733,11 @@ void guest_new_pagetable(struct lg_cpu *cpu, unsigned long pgtable)
pin_stack_pages(cpu);
}
-/*H:470 Finally, a routine which throws away everything: all PGD entries in all
+/*H:470
+ * Finally, a routine which throws away everything: all PGD entries in all
* the shadow page tables, including the Guest's kernel mappings. This is used
- * when we destroy the Guest. */
+ * when we destroy the Guest.
+ */
static void release_all_pagetables(struct lguest *lg)
{
unsigned int i, j;
@@ -656,8 +754,10 @@ static void release_all_pagetables(struct lguest *lg)
spgd = lg->pgdirs[i].pgdir + SWITCHER_PGD_INDEX;
pmdpage = __va(pgd_pfn(*spgd) << PAGE_SHIFT);
- /* And release the pmd entries of that pmd page,
- * except for the switcher pmd. */
+ /*
+ * And release the pmd entries of that pmd page,
+ * except for the switcher pmd.
+ */
for (k = 0; k < SWITCHER_PMD_INDEX; k++)
release_pmd(&pmdpage[k]);
#endif
@@ -667,10 +767,12 @@ static void release_all_pagetables(struct lguest *lg)
}
}
-/* We also throw away everything when a Guest tells us it's changed a kernel
+/*
+ * We also throw away everything when a Guest tells us it's changed a kernel
* mapping. Since kernel mappings are in every page table, it's easiest to
* throw them all away. This traps the Guest in amber for a while as
- * everything faults back in, but it's rare. */
+ * everything faults back in, but it's rare.
+ */
void guest_pagetable_clear_all(struct lg_cpu *cpu)
{
release_all_pagetables(cpu->lg);
@@ -678,15 +780,19 @@ void guest_pagetable_clear_all(struct lg_cpu *cpu)
pin_stack_pages(cpu);
}
/*:*/
-/*M:009 Since we throw away all mappings when a kernel mapping changes, our
+
+/*M:009
+ * Since we throw away all mappings when a kernel mapping changes, our
* performance sucks for guests using highmem. In fact, a guest with
* PAGE_OFFSET 0xc0000000 (the default) and more than about 700MB of RAM is
* usually slower than a Guest with less memory.
*
* This, of course, cannot be fixed. It would take some kind of... well, I
- * don't know, but the term "puissant code-fu" comes to mind. :*/
+ * don't know, but the term "puissant code-fu" comes to mind.
+:*/
-/*H:420 This is the routine which actually sets the page table entry for then
+/*H:420
+ * This is the routine which actually sets the page table entry for then
* "idx"'th shadow page table.
*
* Normally, we can just throw out the old entry and replace it with 0: if they
@@ -715,31 +821,36 @@ static void do_set_pte(struct lg_cpu *cpu, int idx,
spmd = spmd_addr(cpu, *spgd, vaddr);
if (pmd_flags(*spmd) & _PAGE_PRESENT) {
#endif
- /* Otherwise, we start by releasing
- * the existing entry. */
+ /* Otherwise, start by releasing the existing entry. */
pte_t *spte = spte_addr(cpu, *spgd, vaddr);
release_pte(*spte);
- /* If they're setting this entry as dirty or accessed,
- * we might as well put that entry they've given us
- * in now. This shaves 10% off a
- * copy-on-write micro-benchmark. */
+ /*
+ * If they're setting this entry as dirty or accessed,
+ * we might as well put that entry they've given us in
+ * now. This shaves 10% off a copy-on-write
+ * micro-benchmark.
+ */
if (pte_flags(gpte) & (_PAGE_DIRTY | _PAGE_ACCESSED)) {
check_gpte(cpu, gpte);
native_set_pte(spte,
gpte_to_spte(cpu, gpte,
pte_flags(gpte) & _PAGE_DIRTY));
- } else
- /* Otherwise kill it and we can demand_page()
- * it in later. */
+ } else {
+ /*
+ * Otherwise kill it and we can demand_page()
+ * it in later.
+ */
native_set_pte(spte, __pte(0));
+ }
#ifdef CONFIG_X86_PAE
}
#endif
}
}
-/*H:410 Updating a PTE entry is a little trickier.
+/*H:410
+ * Updating a PTE entry is a little trickier.
*
* We keep track of several different page tables (the Guest uses one for each
* process, so it makes sense to cache at least a few). Each of these have
@@ -748,12 +859,15 @@ static void do_set_pte(struct lg_cpu *cpu, int idx,
* all the page tables, not just the current one. This is rare.
*
* The benefit is that when we have to track a new page table, we can keep all
- * the kernel mappings. This speeds up context switch immensely. */
+ * the kernel mappings. This speeds up context switch immensely.
+ */
void guest_set_pte(struct lg_cpu *cpu,
unsigned long gpgdir, unsigned long vaddr, pte_t gpte)
{
- /* Kernel mappings must be changed on all top levels. Slow, but doesn't
- * happen often. */
+ /*
+ * Kernel mappings must be changed on all top levels. Slow, but doesn't
+ * happen often.
+ */
if (vaddr >= cpu->lg->kernel_address) {
unsigned int i;
for (i = 0; i < ARRAY_SIZE(cpu->lg->pgdirs); i++)
@@ -795,19 +909,25 @@ void guest_set_pgd(struct lguest *lg, unsigned long gpgdir, u32 idx)
/* ... throw it away. */
release_pgd(lg->pgdirs[pgdir].pgdir + idx);
}
+
#ifdef CONFIG_X86_PAE
+/* For setting a mid-level, we just throw everything away. It's easy. */
void guest_set_pmd(struct lguest *lg, unsigned long pmdp, u32 idx)
{
guest_pagetable_clear_all(&lg->cpus[0]);
}
#endif
-/* Once we know how much memory we have we can construct simple identity
- * (which set virtual == physical) and linear mappings
- * which will get the Guest far enough into the boot to create its own.
+/*H:505
+ * To get through boot, we construct simple identity page mappings (which
+ * set virtual == physical) and linear mappings which will get the Guest far
+ * enough into the boot to create its own. The linear mapping means we
+ * simplify the Guest boot, but it makes assumptions about their PAGE_OFFSET,
+ * as you'll see.
*
* We lay them out of the way, just below the initrd (which is why we need to
- * know its size here). */
+ * know its size here).
+ */
static unsigned long setup_pagetables(struct lguest *lg,
unsigned long mem,
unsigned long initrd_size)
@@ -825,8 +945,10 @@ static unsigned long setup_pagetables(struct lguest *lg,
unsigned int phys_linear;
#endif
- /* We have mapped_pages frames to map, so we need
- * linear_pages page tables to map them. */
+ /*
+ * We have mapped_pages frames to map, so we need linear_pages page
+ * tables to map them.
+ */
mapped_pages = mem / PAGE_SIZE;
linear_pages = (mapped_pages + PTRS_PER_PTE - 1) / PTRS_PER_PTE;
@@ -837,10 +959,16 @@ static unsigned long setup_pagetables(struct lguest *lg,
linear = (void *)pgdir - linear_pages * PAGE_SIZE;
#ifdef CONFIG_X86_PAE
+ /*
+ * And the single mid page goes below that. We only use one, but
+ * that's enough to map 1G, which definitely gets us through boot.
+ */
pmds = (void *)linear - PAGE_SIZE;
#endif
- /* Linear mapping is easy: put every page's address into the
- * mapping in order. */
+ /*
+ * Linear mapping is easy: put every page's address into the
+ * mapping in order.
+ */
for (i = 0; i < mapped_pages; i++) {
pte_t pte;
pte = pfn_pte(i, __pgprot(_PAGE_PRESENT|_PAGE_RW|_PAGE_USER));
@@ -848,11 +976,14 @@ static unsigned long setup_pagetables(struct lguest *lg,
return -EFAULT;
}
- /* The top level points to the linear page table pages above.
- * We setup the identity and linear mappings here. */
#ifdef CONFIG_X86_PAE
+ /*
+ * Make the Guest PMD entries point to the corresponding place in the
+ * linear mapping (up to one page worth of PMD).
+ */
for (i = j = 0; i < mapped_pages && j < PTRS_PER_PMD;
i += PTRS_PER_PTE, j++) {
+ /* FIXME: native_set_pmd is overkill here. */
native_set_pmd(&pmd, __pmd(((unsigned long)(linear + i)
- mem_base) | _PAGE_PRESENT | _PAGE_RW | _PAGE_USER));
@@ -860,18 +991,36 @@ static unsigned long setup_pagetables(struct lguest *lg,
return -EFAULT;
}
+ /* One PGD entry, pointing to that PMD page. */
set_pgd(&pgd, __pgd(((u32)pmds - mem_base) | _PAGE_PRESENT));
+ /* Copy it in as the first PGD entry (ie. addresses 0-1G). */
if (copy_to_user(&pgdir[0], &pgd, sizeof(pgd)) != 0)
return -EFAULT;
+ /*
+ * And the third PGD entry (ie. addresses 3G-4G).
+ *
+ * FIXME: This assumes that PAGE_OFFSET for the Guest is 0xC0000000.
+ */
if (copy_to_user(&pgdir[3], &pgd, sizeof(pgd)) != 0)
return -EFAULT;
#else
+ /*
+ * The top level points to the linear page table pages above.
+ * We setup the identity and linear mappings here.
+ */
phys_linear = (unsigned long)linear - mem_base;
for (i = 0; i < mapped_pages; i += PTRS_PER_PTE) {
pgd_t pgd;
+ /*
+ * Create a PGD entry which points to the right part of the
+ * linear PTE pages.
+ */
pgd = __pgd((phys_linear + i * sizeof(pte_t)) |
(_PAGE_PRESENT | _PAGE_RW | _PAGE_USER));
+ /*
+ * Copy it into the PGD page at 0 and PAGE_OFFSET.
+ */
if (copy_to_user(&pgdir[i / PTRS_PER_PTE], &pgd, sizeof(pgd))
|| copy_to_user(&pgdir[pgd_index(PAGE_OFFSET)
+ i / PTRS_PER_PTE],
@@ -880,15 +1029,19 @@ static unsigned long setup_pagetables(struct lguest *lg,
}
#endif
- /* We return the top level (guest-physical) address: remember where
- * this is. */
+ /*
+ * We return the top level (guest-physical) address: we remember where
+ * this is to write it into lguest_data when the Guest initializes.
+ */
return (unsigned long)pgdir - mem_base;
}
-/*H:500 (vii) Setting up the page tables initially.
+/*H:500
+ * (vii) Setting up the page tables initially.
*
* When a Guest is first created, the Launcher tells us where the toplevel of
- * its first page table is. We set some things up here: */
+ * its first page table is. We set some things up here:
+ */
int init_guest_pagetable(struct lguest *lg)
{
u64 mem;
@@ -898,21 +1051,27 @@ int init_guest_pagetable(struct lguest *lg)
pgd_t *pgd;
pmd_t *pmd_table;
#endif
- /* Get the Guest memory size and the ramdisk size from the boot header
- * located at lg->mem_base (Guest address 0). */
+ /*
+ * Get the Guest memory size and the ramdisk size from the boot header
+ * located at lg->mem_base (Guest address 0).
+ */
if (copy_from_user(&mem, &boot->e820_map[0].size, sizeof(mem))
|| get_user(initrd_size, &boot->hdr.ramdisk_size))
return -EFAULT;
- /* We start on the first shadow page table, and give it a blank PGD
- * page. */
+ /*
+ * We start on the first shadow page table, and give it a blank PGD
+ * page.
+ */
lg->pgdirs[0].gpgdir = setup_pagetables(lg, mem, initrd_size);
if (IS_ERR_VALUE(lg->pgdirs[0].gpgdir))
return lg->pgdirs[0].gpgdir;
lg->pgdirs[0].pgdir = (pgd_t *)get_zeroed_page(GFP_KERNEL);
if (!lg->pgdirs[0].pgdir)
return -ENOMEM;
+
#ifdef CONFIG_X86_PAE
+ /* For PAE, we also create the initial mid-level. */
pgd = lg->pgdirs[0].pgdir;
pmd_table = (pmd_t *) get_zeroed_page(GFP_KERNEL);
if (!pmd_table)
@@ -921,27 +1080,33 @@ int init_guest_pagetable(struct lguest *lg)
set_pgd(pgd + SWITCHER_PGD_INDEX,
__pgd(__pa(pmd_table) | _PAGE_PRESENT));
#endif
+
+ /* This is the current page table. */
lg->cpus[0].cpu_pgd = 0;
return 0;
}
-/* When the Guest calls LHCALL_LGUEST_INIT we do more setup. */
+/*H:508 When the Guest calls LHCALL_LGUEST_INIT we do more setup. */
void page_table_guest_data_init(struct lg_cpu *cpu)
{
/* We get the kernel address: above this is all kernel memory. */
if (get_user(cpu->lg->kernel_address,
&cpu->lg->lguest_data->kernel_address)
- /* We tell the Guest that it can't use the top 2 or 4 MB
- * of virtual addresses used by the Switcher. */
+ /*
+ * We tell the Guest that it can't use the top 2 or 4 MB
+ * of virtual addresses used by the Switcher.
+ */
|| put_user(RESERVE_MEM * 1024 * 1024,
&cpu->lg->lguest_data->reserve_mem)
|| put_user(cpu->lg->pgdirs[0].gpgdir,
&cpu->lg->lguest_data->pgdir))
kill_guest(cpu, "bad guest page %p", cpu->lg->lguest_data);
- /* In flush_user_mappings() we loop from 0 to
+ /*
+ * In flush_user_mappings() we loop from 0 to
* "pgd_index(lg->kernel_address)". This assumes it won't hit the
- * Switcher mappings, so check that now. */
+ * Switcher mappings, so check that now.
+ */
#ifdef CONFIG_X86_PAE
if (pgd_index(cpu->lg->kernel_address) == SWITCHER_PGD_INDEX &&
pmd_index(cpu->lg->kernel_address) == SWITCHER_PMD_INDEX)
@@ -964,12 +1129,14 @@ void free_guest_pagetable(struct lguest *lg)
free_page((long)lg->pgdirs[i].pgdir);
}
-/*H:480 (vi) Mapping the Switcher when the Guest is about to run.
+/*H:480
+ * (vi) Mapping the Switcher when the Guest is about to run.
*
* The Switcher and the two pages for this CPU need to be visible in the
* Guest (and not the pages for other CPUs). We have the appropriate PTE pages
* for each CPU already set up, we just need to hook them in now we know which
- * Guest is about to run on this CPU. */
+ * Guest is about to run on this CPU.
+ */
void map_switcher_in_guest(struct lg_cpu *cpu, struct lguest_pages *pages)
{
pte_t *switcher_pte_page = __get_cpu_var(switcher_pte_pages);
@@ -980,30 +1147,38 @@ void map_switcher_in_guest(struct lg_cpu *cpu, struct lguest_pages *pages)
pmd_t switcher_pmd;
pmd_t *pmd_table;
+ /* FIXME: native_set_pmd is overkill here. */
native_set_pmd(&switcher_pmd, pfn_pmd(__pa(switcher_pte_page) >>
PAGE_SHIFT, PAGE_KERNEL_EXEC));
+ /* Figure out where the pmd page is, by reading the PGD, and converting
+ * it to a virtual address. */
pmd_table = __va(pgd_pfn(cpu->lg->
pgdirs[cpu->cpu_pgd].pgdir[SWITCHER_PGD_INDEX])
<< PAGE_SHIFT);
+ /* Now write it into the shadow page table. */
native_set_pmd(&pmd_table[SWITCHER_PMD_INDEX], switcher_pmd);
#else
pgd_t switcher_pgd;
- /* Make the last PGD entry for this Guest point to the Switcher's PTE
- * page for this CPU (with appropriate flags). */
+ /*
+ * Make the last PGD entry for this Guest point to the Switcher's PTE
+ * page for this CPU (with appropriate flags).
+ */
switcher_pgd = __pgd(__pa(switcher_pte_page) | __PAGE_KERNEL_EXEC);
cpu->lg->pgdirs[cpu->cpu_pgd].pgdir[SWITCHER_PGD_INDEX] = switcher_pgd;
#endif
- /* We also change the Switcher PTE page. When we're running the Guest,
+ /*
+ * We also change the Switcher PTE page. When we're running the Guest,
* we want the Guest's "regs" page to appear where the first Switcher
* page for this CPU is. This is an optimization: when the Switcher
* saves the Guest registers, it saves them into the first page of this
* CPU's "struct lguest_pages": if we make sure the Guest's register
* page is already mapped there, we don't have to copy them out
- * again. */
+ * again.
+ */
pfn = __pa(cpu->regs_page) >> PAGE_SHIFT;
native_set_pte(&regs_pte, pfn_pte(pfn, PAGE_KERNEL));
native_set_pte(&switcher_pte_page[pte_index((unsigned long)pages)],
@@ -1019,10 +1194,12 @@ static void free_switcher_pte_pages(void)
free_page((long)switcher_pte_page(i));
}
-/*H:520 Setting up the Switcher PTE page for given CPU is fairly easy, given
+/*H:520
+ * Setting up the Switcher PTE page for given CPU is fairly easy, given
* the CPU number and the "struct page"s for the Switcher code itself.
*
- * Currently the Switcher is less than a page long, so "pages" is always 1. */
+ * Currently the Switcher is less than a page long, so "pages" is always 1.
+ */
static __init void populate_switcher_pte_page(unsigned int cpu,
struct page *switcher_page[],
unsigned int pages)
@@ -1043,13 +1220,16 @@ static __init void populate_switcher_pte_page(unsigned int cpu,
native_set_pte(&pte[i], pfn_pte(page_to_pfn(switcher_page[i]),
__pgprot(_PAGE_PRESENT|_PAGE_ACCESSED|_PAGE_RW)));
- /* The second page contains the "struct lguest_ro_state", and is
- * read-only. */
+ /*
+ * The second page contains the "struct lguest_ro_state", and is
+ * read-only.
+ */
native_set_pte(&pte[i+1], pfn_pte(page_to_pfn(switcher_page[i+1]),
__pgprot(_PAGE_PRESENT|_PAGE_ACCESSED)));
}
-/* We've made it through the page table code. Perhaps our tired brains are
+/*
+ * We've made it through the page table code. Perhaps our tired brains are
* still processing the details, or perhaps we're simply glad it's over.
*
* If nothing else, note that all this complexity in juggling shadow page tables
@@ -1058,10 +1238,13 @@ static __init void populate_switcher_pte_page(unsigned int cpu,
* uses exotic direct Guest pagetable manipulation, and why both Intel and AMD
* have implemented shadow page table support directly into hardware.
*
- * There is just one file remaining in the Host. */
+ * There is just one file remaining in the Host.
+ */
-/*H:510 At boot or module load time, init_pagetables() allocates and populates
- * the Switcher PTE page for each CPU. */
+/*H:510
+ * At boot or module load time, init_pagetables() allocates and populates
+ * the Switcher PTE page for each CPU.
+ */
__init int init_pagetables(struct page **switcher_page, unsigned int pages)
{
unsigned int i;
diff --git a/drivers/lguest/segments.c b/drivers/lguest/segments.c
index 482ed5a1875..951c57b0a7e 100644
--- a/drivers/lguest/segments.c
+++ b/drivers/lguest/segments.c
@@ -1,4 +1,5 @@
-/*P:600 The x86 architecture has segments, which involve a table of descriptors
+/*P:600
+ * The x86 architecture has segments, which involve a table of descriptors
* which can be used to do funky things with virtual address interpretation.
* We originally used to use segments so the Guest couldn't alter the
* Guest<->Host Switcher, and then we had to trim Guest segments, and restore
@@ -8,7 +9,8 @@
*
* In these modern times, the segment handling code consists of simple sanity
* checks, and the worst you'll experience reading this code is butterfly-rash
- * from frolicking through its parklike serenity. :*/
+ * from frolicking through its parklike serenity.
+:*/
#include "lg.h"
/*H:600
@@ -41,10 +43,12 @@
* begin.
*/
-/* There are several entries we don't let the Guest set. The TSS entry is the
+/*
+ * There are several entries we don't let the Guest set. The TSS entry is the
* "Task State Segment" which controls all kinds of delicate things. The
* LGUEST_CS and LGUEST_DS entries are reserved for the Switcher, and the
- * the Guest can't be trusted to deal with double faults. */
+ * the Guest can't be trusted to deal with double faults.
+ */
static bool ignored_gdt(unsigned int num)
{
return (num == GDT_ENTRY_TSS
@@ -53,42 +57,52 @@ static bool ignored_gdt(unsigned int num)
|| num == GDT_ENTRY_DOUBLEFAULT_TSS);
}
-/*H:630 Once the Guest gave us new GDT entries, we fix them up a little. We
+/*H:630
+ * Once the Guest gave us new GDT entries, we fix them up a little. We
* don't care if they're invalid: the worst that can happen is a General
* Protection Fault in the Switcher when it restores a Guest segment register
* which tries to use that entry. Then we kill the Guest for causing such a
- * mess: the message will be "unhandled trap 256". */
+ * mess: the message will be "unhandled trap 256".
+ */
static void fixup_gdt_table(struct lg_cpu *cpu, unsigned start, unsigned end)
{
unsigned int i;
for (i = start; i < end; i++) {
- /* We never copy these ones to real GDT, so we don't care what
- * they say */
+ /*
+ * We never copy these ones to real GDT, so we don't care what
+ * they say
+ */
if (ignored_gdt(i))
continue;
- /* Segment descriptors contain a privilege level: the Guest is
+ /*
+ * Segment descriptors contain a privilege level: the Guest is
* sometimes careless and leaves this as 0, even though it's
- * running at privilege level 1. If so, we fix it here. */
+ * running at privilege level 1. If so, we fix it here.
+ */
if ((cpu->arch.gdt[i].b & 0x00006000) == 0)
cpu->arch.gdt[i].b |= (GUEST_PL << 13);
- /* Each descriptor has an "accessed" bit. If we don't set it
+ /*
+ * Each descriptor has an "accessed" bit. If we don't set it
* now, the CPU will try to set it when the Guest first loads
* that entry into a segment register. But the GDT isn't
- * writable by the Guest, so bad things can happen. */
+ * writable by the Guest, so bad things can happen.
+ */
cpu->arch.gdt[i].b |= 0x00000100;
}
}
-/*H:610 Like the IDT, we never simply use the GDT the Guest gives us. We keep
+/*H:610
+ * Like the IDT, we never simply use the GDT the Guest gives us. We keep
* a GDT for each CPU, and copy across the Guest's entries each time we want to
* run the Guest on that CPU.
*
* This routine is called at boot or modprobe time for each CPU to set up the
* constant GDT entries: the ones which are the same no matter what Guest we're
- * running. */
+ * running.
+ */
void setup_default_gdt_entries(struct lguest_ro_state *state)
{
struct desc_struct *gdt = state->guest_gdt;
@@ -98,30 +112,37 @@ void setup_default_gdt_entries(struct lguest_ro_state *state)
gdt[GDT_ENTRY_LGUEST_CS] = FULL_EXEC_SEGMENT;
gdt[GDT_ENTRY_LGUEST_DS] = FULL_SEGMENT;
- /* The TSS segment refers to the TSS entry for this particular CPU.
+ /*
+ * The TSS segment refers to the TSS entry for this particular CPU.
* Forgive the magic flags: the 0x8900 means the entry is Present, it's
* privilege level 0 Available 386 TSS system segment, and the 0x67
- * means Saturn is eclipsed by Mercury in the twelfth house. */
+ * means Saturn is eclipsed by Mercury in the twelfth house.
+ */
gdt[GDT_ENTRY_TSS].a = 0x00000067 | (tss << 16);
gdt[GDT_ENTRY_TSS].b = 0x00008900 | (tss & 0xFF000000)
| ((tss >> 16) & 0x000000FF);
}
-/* This routine sets up the initial Guest GDT for booting. All entries start
- * as 0 (unusable). */
+/*
+ * This routine sets up the initial Guest GDT for booting. All entries start
+ * as 0 (unusable).
+ */
void setup_guest_gdt(struct lg_cpu *cpu)
{
- /* Start with full 0-4G segments... */
+ /*
+ * Start with full 0-4G segments...except the Guest is allowed to use
+ * them, so set the privilege level appropriately in the flags.
+ */
cpu->arch.gdt[GDT_ENTRY_KERNEL_CS] = FULL_EXEC_SEGMENT;
cpu->arch.gdt[GDT_ENTRY_KERNEL_DS] = FULL_SEGMENT;
- /* ...except the Guest is allowed to use them, so set the privilege
- * level appropriately in the flags. */
cpu->arch.gdt[GDT_ENTRY_KERNEL_CS].b |= (GUEST_PL << 13);
cpu->arch.gdt[GDT_ENTRY_KERNEL_DS].b |= (GUEST_PL << 13);
}
-/*H:650 An optimization of copy_gdt(), for just the three "thead-local storage"
- * entries. */
+/*H:650
+ * An optimization of copy_gdt(), for just the three "thead-local storage"
+ * entries.
+ */
void copy_gdt_tls(const struct lg_cpu *cpu, struct desc_struct *gdt)
{
unsigned int i;
@@ -130,26 +151,34 @@ void copy_gdt_tls(const struct lg_cpu *cpu, struct desc_struct *gdt)
gdt[i] = cpu->arch.gdt[i];
}
-/*H:640 When the Guest is run on a different CPU, or the GDT entries have
- * changed, copy_gdt() is called to copy the Guest's GDT entries across to this
- * CPU's GDT. */
+/*H:640
+ * When the Guest is run on a different CPU, or the GDT entries have changed,
+ * copy_gdt() is called to copy the Guest's GDT entries across to this CPU's
+ * GDT.
+ */
void copy_gdt(const struct lg_cpu *cpu, struct desc_struct *gdt)
{
unsigned int i;
- /* The default entries from setup_default_gdt_entries() are not
- * replaced. See ignored_gdt() above. */
+ /*
+ * The default entries from setup_default_gdt_entries() are not
+ * replaced. See ignored_gdt() above.
+ */
for (i = 0; i < GDT_ENTRIES; i++)
if (!ignored_gdt(i))
gdt[i] = cpu->arch.gdt[i];
}
-/*H:620 This is where the Guest asks us to load a new GDT entry
- * (LHCALL_LOAD_GDT_ENTRY). We tweak the entry and copy it in. */
+/*H:620
+ * This is where the Guest asks us to load a new GDT entry
+ * (LHCALL_LOAD_GDT_ENTRY). We tweak the entry and copy it in.
+ */
void load_guest_gdt_entry(struct lg_cpu *cpu, u32 num, u32 lo, u32 hi)
{
- /* We assume the Guest has the same number of GDT entries as the
- * Host, otherwise we'd have to dynamically allocate the Guest GDT. */
+ /*
+ * We assume the Guest has the same number of GDT entries as the
+ * Host, otherwise we'd have to dynamically allocate the Guest GDT.
+ */
if (num >= ARRAY_SIZE(cpu->arch.gdt))
kill_guest(cpu, "too many gdt entries %i", num);
@@ -157,15 +186,19 @@ void load_guest_gdt_entry(struct lg_cpu *cpu, u32 num, u32 lo, u32 hi)
cpu->arch.gdt[num].a = lo;
cpu->arch.gdt[num].b = hi;
fixup_gdt_table(cpu, num, num+1);
- /* Mark that the GDT changed so the core knows it has to copy it again,
- * even if the Guest is run on the same CPU. */
+ /*
+ * Mark that the GDT changed so the core knows it has to copy it again,
+ * even if the Guest is run on the same CPU.
+ */
cpu->changed |= CHANGED_GDT;
}
-/* This is the fast-track version for just changing the three TLS entries.
+/*
+ * This is the fast-track version for just changing the three TLS entries.
* Remember that this happens on every context switch, so it's worth
* optimizing. But wouldn't it be neater to have a single hypercall to cover
- * both cases? */
+ * both cases?
+ */
void guest_load_tls(struct lg_cpu *cpu, unsigned long gtls)
{
struct desc_struct *tls = &cpu->arch.gdt[GDT_ENTRY_TLS_MIN];
@@ -175,7 +208,6 @@ void guest_load_tls(struct lg_cpu *cpu, unsigned long gtls)
/* Note that just the TLS entries have changed. */
cpu->changed |= CHANGED_GDT_TLS;
}
-/*:*/
/*H:660
* With this, we have finished the Host.
diff --git a/drivers/lguest/x86/core.c b/drivers/lguest/x86/core.c
index eaf722fe309..6ae388849a3 100644
--- a/drivers/lguest/x86/core.c
+++ b/drivers/lguest/x86/core.c
@@ -17,13 +17,15 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-/*P:450 This file contains the x86-specific lguest code. It used to be all
+/*P:450
+ * This file contains the x86-specific lguest code. It used to be all
* mixed in with drivers/lguest/core.c but several foolhardy code slashers
* wrestled most of the dependencies out to here in preparation for porting
* lguest to other architectures (see what I mean by foolhardy?).
*
* This also contains a couple of non-obvious setup and teardown pieces which
- * were implemented after days of debugging pain. :*/
+ * were implemented after days of debugging pain.
+:*/
#include <linux/kernel.h>
#include <linux/start_kernel.h>
#include <linux/string.h>
@@ -82,25 +84,33 @@ static DEFINE_PER_CPU(struct lg_cpu *, last_cpu);
*/
static void copy_in_guest_info(struct lg_cpu *cpu, struct lguest_pages *pages)
{
- /* Copying all this data can be quite expensive. We usually run the
+ /*
+ * Copying all this data can be quite expensive. We usually run the
* same Guest we ran last time (and that Guest hasn't run anywhere else
* meanwhile). If that's not the case, we pretend everything in the
- * Guest has changed. */
+ * Guest has changed.
+ */
if (__get_cpu_var(last_cpu) != cpu || cpu->last_pages != pages) {
__get_cpu_var(last_cpu) = cpu;
cpu->last_pages = pages;
cpu->changed = CHANGED_ALL;
}
- /* These copies are pretty cheap, so we do them unconditionally: */
- /* Save the current Host top-level page directory. */
+ /*
+ * These copies are pretty cheap, so we do them unconditionally: */
+ /* Save the current Host top-level page directory.
+ */
pages->state.host_cr3 = __pa(current->mm->pgd);
- /* Set up the Guest's page tables to see this CPU's pages (and no
- * other CPU's pages). */
+ /*
+ * Set up the Guest's page tables to see this CPU's pages (and no
+ * other CPU's pages).
+ */
map_switcher_in_guest(cpu, pages);
- /* Set up the two "TSS" members which tell the CPU what stack to use
+ /*
+ * Set up the two "TSS" members which tell the CPU what stack to use
* for traps which do directly into the Guest (ie. traps at privilege
- * level 1). */
+ * level 1).
+ */
pages->state.guest_tss.sp1 = cpu->esp1;
pages->state.guest_tss.ss1 = cpu->ss1;
@@ -125,97 +135,126 @@ static void run_guest_once(struct lg_cpu *cpu, struct lguest_pages *pages)
/* This is a dummy value we need for GCC's sake. */
unsigned int clobber;
- /* Copy the guest-specific information into this CPU's "struct
- * lguest_pages". */
+ /*
+ * Copy the guest-specific information into this CPU's "struct
+ * lguest_pages".
+ */
copy_in_guest_info(cpu, pages);
- /* Set the trap number to 256 (impossible value). If we fault while
+ /*
+ * Set the trap number to 256 (impossible value). If we fault while
* switching to the Guest (bad segment registers or bug), this will
- * cause us to abort the Guest. */
+ * cause us to abort the Guest.
+ */
cpu->regs->trapnum = 256;
- /* Now: we push the "eflags" register on the stack, then do an "lcall".
+ /*
+ * Now: we push the "eflags" register on the stack, then do an "lcall".
* This is how we change from using the kernel code segment to using
* the dedicated lguest code segment, as well as jumping into the
* Switcher.
*
* The lcall also pushes the old code segment (KERNEL_CS) onto the
* stack, then the address of this call. This stack layout happens to
- * exactly match the stack layout created by an interrupt... */
+ * exactly match the stack layout created by an interrupt...
+ */
asm volatile("pushf; lcall *lguest_entry"
- /* This is how we tell GCC that %eax ("a") and %ebx ("b")
- * are changed by this routine. The "=" means output. */
+ /*
+ * This is how we tell GCC that %eax ("a") and %ebx ("b")
+ * are changed by this routine. The "=" means output.
+ */
: "=a"(clobber), "=b"(clobber)
- /* %eax contains the pages pointer. ("0" refers to the
+ /*
+ * %eax contains the pages pointer. ("0" refers to the
* 0-th argument above, ie "a"). %ebx contains the
* physical address of the Guest's top-level page
- * directory. */
+ * directory.
+ */
: "0"(pages), "1"(__pa(cpu->lg->pgdirs[cpu->cpu_pgd].pgdir))
- /* We tell gcc that all these registers could change,
+ /*
+ * We tell gcc that all these registers could change,
* which means we don't have to save and restore them in
- * the Switcher. */
+ * the Switcher.
+ */
: "memory", "%edx", "%ecx", "%edi", "%esi");
}
/*:*/
-/*M:002 There are hooks in the scheduler which we can register to tell when we
+/*M:002
+ * There are hooks in the scheduler which we can register to tell when we
* get kicked off the CPU (preempt_notifier_register()). This would allow us
* to lazily disable SYSENTER which would regain some performance, and should
* also simplify copy_in_guest_info(). Note that we'd still need to restore
* things when we exit to Launcher userspace, but that's fairly easy.
*
- * We could also try using this hooks for PGE, but that might be too expensive.
+ * We could also try using these hooks for PGE, but that might be too expensive.
*
- * The hooks were designed for KVM, but we can also put them to good use. :*/
+ * The hooks were designed for KVM, but we can also put them to good use.
+:*/
-/*H:040 This is the i386-specific code to setup and run the Guest. Interrupts
- * are disabled: we own the CPU. */
+/*H:040
+ * This is the i386-specific code to setup and run the Guest. Interrupts
+ * are disabled: we own the CPU.
+ */
void lguest_arch_run_guest(struct lg_cpu *cpu)
{
- /* Remember the awfully-named TS bit? If the Guest has asked to set it
+ /*
+ * Remember the awfully-named TS bit? If the Guest has asked to set it
* we set it now, so we can trap and pass that trap to the Guest if it
- * uses the FPU. */
+ * uses the FPU.
+ */
if (cpu->ts)
unlazy_fpu(current);
- /* SYSENTER is an optimized way of doing system calls. We can't allow
+ /*
+ * SYSENTER is an optimized way of doing system calls. We can't allow
* it because it always jumps to privilege level 0. A normal Guest
* won't try it because we don't advertise it in CPUID, but a malicious
* Guest (or malicious Guest userspace program) could, so we tell the
- * CPU to disable it before running the Guest. */
+ * CPU to disable it before running the Guest.
+ */
if (boot_cpu_has(X86_FEATURE_SEP))
wrmsr(MSR_IA32_SYSENTER_CS, 0, 0);
- /* Now we actually run the Guest. It will return when something
+ /*
+ * Now we actually run the Guest. It will return when something
* interesting happens, and we can examine its registers to see what it
- * was doing. */
+ * was doing.
+ */
run_guest_once(cpu, lguest_pages(raw_smp_processor_id()));
- /* Note that the "regs" structure contains two extra entries which are
+ /*
+ * Note that the "regs" structure contains two extra entries which are
* not really registers: a trap number which says what interrupt or
* trap made the switcher code come back, and an error code which some
- * traps set. */
+ * traps set.
+ */
/* Restore SYSENTER if it's supposed to be on. */
if (boot_cpu_has(X86_FEATURE_SEP))
wrmsr(MSR_IA32_SYSENTER_CS, __KERNEL_CS, 0);
- /* If the Guest page faulted, then the cr2 register will tell us the
+ /*
+ * If the Guest page faulted, then the cr2 register will tell us the
* bad virtual address. We have to grab this now, because once we
* re-enable interrupts an interrupt could fault and thus overwrite
- * cr2, or we could even move off to a different CPU. */
+ * cr2, or we could even move off to a different CPU.
+ */
if (cpu->regs->trapnum == 14)
cpu->arch.last_pagefault = read_cr2();
- /* Similarly, if we took a trap because the Guest used the FPU,
+ /*
+ * Similarly, if we took a trap because the Guest used the FPU,
* we have to restore the FPU it expects to see.
* math_state_restore() may sleep and we may even move off to
* a different CPU. So all the critical stuff should be done
- * before this. */
+ * before this.
+ */
else if (cpu->regs->trapnum == 7)
math_state_restore();
}
-/*H:130 Now we've examined the hypercall code; our Guest can make requests.
+/*H:130
+ * Now we've examined the hypercall code; our Guest can make requests.
* Our Guest is usually so well behaved; it never tries to do things it isn't
* allowed to, and uses hypercalls instead. Unfortunately, Linux's paravirtual
* infrastructure isn't quite complete, because it doesn't contain replacements
@@ -225,26 +264,33 @@ void lguest_arch_run_guest(struct lg_cpu *cpu)
*
* When the Guest uses one of these instructions, we get a trap (General
* Protection Fault) and come here. We see if it's one of those troublesome
- * instructions and skip over it. We return true if we did. */
+ * instructions and skip over it. We return true if we did.
+ */
static int emulate_insn(struct lg_cpu *cpu)
{
u8 insn;
unsigned int insnlen = 0, in = 0, shift = 0;
- /* The eip contains the *virtual* address of the Guest's instruction:
- * guest_pa just subtracts the Guest's page_offset. */
+ /*
+ * The eip contains the *virtual* address of the Guest's instruction:
+ * guest_pa just subtracts the Guest's page_offset.
+ */
unsigned long physaddr = guest_pa(cpu, cpu->regs->eip);
- /* This must be the Guest kernel trying to do something, not userspace!
+ /*
+ * This must be the Guest kernel trying to do something, not userspace!
* The bottom two bits of the CS segment register are the privilege
- * level. */
+ * level.
+ */
if ((cpu->regs->cs & 3) != GUEST_PL)
return 0;
/* Decoding x86 instructions is icky. */
insn = lgread(cpu, physaddr, u8);
- /* 0x66 is an "operand prefix". It means it's using the upper 16 bits
- of the eax register. */
+ /*
+ * 0x66 is an "operand prefix". It means it's using the upper 16 bits
+ * of the eax register.
+ */
if (insn == 0x66) {
shift = 16;
/* The instruction is 1 byte so far, read the next byte. */
@@ -252,8 +298,10 @@ static int emulate_insn(struct lg_cpu *cpu)
insn = lgread(cpu, physaddr + insnlen, u8);
}
- /* We can ignore the lower bit for the moment and decode the 4 opcodes
- * we need to emulate. */
+ /*
+ * We can ignore the lower bit for the moment and decode the 4 opcodes
+ * we need to emulate.
+ */
switch (insn & 0xFE) {
case 0xE4: /* in <next byte>,%al */
insnlen += 2;
@@ -274,9 +322,11 @@ static int emulate_insn(struct lg_cpu *cpu)
return 0;
}
- /* If it was an "IN" instruction, they expect the result to be read
+ /*
+ * If it was an "IN" instruction, they expect the result to be read
* into %eax, so we change %eax. We always return all-ones, which
- * traditionally means "there's nothing there". */
+ * traditionally means "there's nothing there".
+ */
if (in) {
/* Lower bit tells is whether it's a 16 or 32 bit access */
if (insn & 0x1)
@@ -290,7 +340,8 @@ static int emulate_insn(struct lg_cpu *cpu)
return 1;
}
-/* Our hypercalls mechanism used to be based on direct software interrupts.
+/*
+ * Our hypercalls mechanism used to be based on direct software interrupts.
* After Anthony's "Refactor hypercall infrastructure" kvm patch, we decided to
* change over to using kvm hypercalls.
*
@@ -318,16 +369,20 @@ static int emulate_insn(struct lg_cpu *cpu)
*/
static void rewrite_hypercall(struct lg_cpu *cpu)
{
- /* This are the opcodes we use to patch the Guest. The opcode for "int
+ /*
+ * This are the opcodes we use to patch the Guest. The opcode for "int
* $0x1f" is "0xcd 0x1f" but vmcall instruction is 3 bytes long, so we
- * complete the sequence with a NOP (0x90). */
+ * complete the sequence with a NOP (0x90).
+ */
u8 insn[3] = {0xcd, 0x1f, 0x90};
__lgwrite(cpu, guest_pa(cpu, cpu->regs->eip), insn, sizeof(insn));
- /* The above write might have caused a copy of that page to be made
+ /*
+ * The above write might have caused a copy of that page to be made
* (if it was read-only). We need to make sure the Guest has
* up-to-date pagetables. As this doesn't happen often, we can just
- * drop them all. */
+ * drop them all.
+ */
guest_pagetable_clear_all(cpu);
}
@@ -335,9 +390,11 @@ static bool is_hypercall(struct lg_cpu *cpu)
{
u8 insn[3];
- /* This must be the Guest kernel trying to do something.
+ /*
+ * This must be the Guest kernel trying to do something.
* The bottom two bits of the CS segment register are the privilege
- * level. */
+ * level.
+ */
if ((cpu->regs->cs & 3) != GUEST_PL)
return false;
@@ -351,86 +408,105 @@ void lguest_arch_handle_trap(struct lg_cpu *cpu)
{
switch (cpu->regs->trapnum) {
case 13: /* We've intercepted a General Protection Fault. */
- /* Check if this was one of those annoying IN or OUT
+ /*
+ * Check if this was one of those annoying IN or OUT
* instructions which we need to emulate. If so, we just go
- * back into the Guest after we've done it. */
+ * back into the Guest after we've done it.
+ */
if (cpu->regs->errcode == 0) {
if (emulate_insn(cpu))
return;
}
- /* If KVM is active, the vmcall instruction triggers a
- * General Protection Fault. Normally it triggers an
- * invalid opcode fault (6): */
+ /*
+ * If KVM is active, the vmcall instruction triggers a General
+ * Protection Fault. Normally it triggers an invalid opcode
+ * fault (6):
+ */
case 6:
- /* We need to check if ring == GUEST_PL and
- * faulting instruction == vmcall. */
+ /*
+ * We need to check if ring == GUEST_PL and faulting
+ * instruction == vmcall.
+ */
if (is_hypercall(cpu)) {
rewrite_hypercall(cpu);
return;
}
break;
case 14: /* We've intercepted a Page Fault. */
- /* The Guest accessed a virtual address that wasn't mapped.
+ /*
+ * The Guest accessed a virtual address that wasn't mapped.
* This happens a lot: we don't actually set up most of the page
* tables for the Guest at all when we start: as it runs it asks
* for more and more, and we set them up as required. In this
* case, we don't even tell the Guest that the fault happened.
*
* The errcode tells whether this was a read or a write, and
- * whether kernel or userspace code. */
+ * whether kernel or userspace code.
+ */
if (demand_page(cpu, cpu->arch.last_pagefault,
cpu->regs->errcode))
return;
- /* OK, it's really not there (or not OK): the Guest needs to
+ /*
+ * OK, it's really not there (or not OK): the Guest needs to
* know. We write out the cr2 value so it knows where the
* fault occurred.
*
* Note that if the Guest were really messed up, this could
* happen before it's done the LHCALL_LGUEST_INIT hypercall, so
- * lg->lguest_data could be NULL */
+ * lg->lguest_data could be NULL
+ */
if (cpu->lg->lguest_data &&
put_user(cpu->arch.last_pagefault,
&cpu->lg->lguest_data->cr2))
kill_guest(cpu, "Writing cr2");
break;
case 7: /* We've intercepted a Device Not Available fault. */
- /* If the Guest doesn't want to know, we already restored the
- * Floating Point Unit, so we just continue without telling
- * it. */
+ /*
+ * If the Guest doesn't want to know, we already restored the
+ * Floating Point Unit, so we just continue without telling it.
+ */
if (!cpu->ts)
return;
break;
case 32 ... 255:
- /* These values mean a real interrupt occurred, in which case
+ /*
+ * These values mean a real interrupt occurred, in which case
* the Host handler has already been run. We just do a
* friendly check if another process should now be run, then
- * return to run the Guest again */
+ * return to run the Guest again
+ */
cond_resched();
return;
case LGUEST_TRAP_ENTRY:
- /* Our 'struct hcall_args' maps directly over our regs: we set
- * up the pointer now to indicate a hypercall is pending. */
+ /*
+ * Our 'struct hcall_args' maps directly over our regs: we set
+ * up the pointer now to indicate a hypercall is pending.
+ */
cpu->hcall = (struct hcall_args *)cpu->regs;
return;
}
/* We didn't handle the trap, so it needs to go to the Guest. */
if (!deliver_trap(cpu, cpu->regs->trapnum))
- /* If the Guest doesn't have a handler (either it hasn't
+ /*
+ * If the Guest doesn't have a handler (either it hasn't
* registered any yet, or it's one of the faults we don't let
- * it handle), it dies with this cryptic error message. */
+ * it handle), it dies with this cryptic error message.
+ */
kill_guest(cpu, "unhandled trap %li at %#lx (%#lx)",
cpu->regs->trapnum, cpu->regs->eip,
cpu->regs->trapnum == 14 ? cpu->arch.last_pagefault
: cpu->regs->errcode);
}
-/* Now we can look at each of the routines this calls, in increasing order of
+/*
+ * Now we can look at each of the routines this calls, in increasing order of
* complexity: do_hypercalls(), emulate_insn(), maybe_do_interrupt(),
* deliver_trap() and demand_page(). After all those, we'll be ready to
* examine the Switcher, and our philosophical understanding of the Host/Guest
- * duality will be complete. :*/
+ * duality will be complete.
+:*/
static void adjust_pge(void *on)
{
if (on)
@@ -439,13 +515,16 @@ static void adjust_pge(void *on)
write_cr4(read_cr4() & ~X86_CR4_PGE);
}
-/*H:020 Now the Switcher is mapped and every thing else is ready, we need to do
- * some more i386-specific initialization. */
+/*H:020
+ * Now the Switcher is mapped and every thing else is ready, we need to do
+ * some more i386-specific initialization.
+ */
void __init lguest_arch_host_init(void)
{
int i;
- /* Most of the i386/switcher.S doesn't care that it's been moved; on
+ /*
+ * Most of the i386/switcher.S doesn't care that it's been moved; on
* Intel, jumps are relative, and it doesn't access any references to
* external code or data.
*
@@ -453,7 +532,8 @@ void __init lguest_arch_host_init(void)
* addresses are placed in a table (default_idt_entries), so we need to
* update the table with the new addresses. switcher_offset() is a
* convenience function which returns the distance between the
- * compiled-in switcher code and the high-mapped copy we just made. */
+ * compiled-in switcher code and the high-mapped copy we just made.
+ */
for (i = 0; i < IDT_ENTRIES; i++)
default_idt_entries[i] += switcher_offset();
@@ -468,63 +548,81 @@ void __init lguest_arch_host_init(void)
for_each_possible_cpu(i) {
/* lguest_pages() returns this CPU's two pages. */
struct lguest_pages *pages = lguest_pages(i);
- /* This is a convenience pointer to make the code fit one
- * statement to a line. */
+ /* This is a convenience pointer to make the code neater. */
struct lguest_ro_state *state = &pages->state;
- /* The Global Descriptor Table: the Host has a different one
+ /*
+ * The Global Descriptor Table: the Host has a different one
* for each CPU. We keep a descriptor for the GDT which says
* where it is and how big it is (the size is actually the last
- * byte, not the size, hence the "-1"). */
+ * byte, not the size, hence the "-1").
+ */
state->host_gdt_desc.size = GDT_SIZE-1;
state->host_gdt_desc.address = (long)get_cpu_gdt_table(i);
- /* All CPUs on the Host use the same Interrupt Descriptor
+ /*
+ * All CPUs on the Host use the same Interrupt Descriptor
* Table, so we just use store_idt(), which gets this CPU's IDT
- * descriptor. */
+ * descriptor.
+ */
store_idt(&state->host_idt_desc);
- /* The descriptors for the Guest's GDT and IDT can be filled
+ /*
+ * The descriptors for the Guest's GDT and IDT can be filled
* out now, too. We copy the GDT & IDT into ->guest_gdt and
- * ->guest_idt before actually running the Guest. */
+ * ->guest_idt before actually running the Guest.
+ */
state->guest_idt_desc.size = sizeof(state->guest_idt)-1;
state->guest_idt_desc.address = (long)&state->guest_idt;
state->guest_gdt_desc.size = sizeof(state->guest_gdt)-1;
state->guest_gdt_desc.address = (long)&state->guest_gdt;
- /* We know where we want the stack to be when the Guest enters
+ /*
+ * We know where we want the stack to be when the Guest enters
* the Switcher: in pages->regs. The stack grows upwards, so
- * we start it at the end of that structure. */
+ * we start it at the end of that structure.
+ */
state->guest_tss.sp0 = (long)(&pages->regs + 1);
- /* And this is the GDT entry to use for the stack: we keep a
- * couple of special LGUEST entries. */
+ /*
+ * And this is the GDT entry to use for the stack: we keep a
+ * couple of special LGUEST entries.
+ */
state->guest_tss.ss0 = LGUEST_DS;
- /* x86 can have a finegrained bitmap which indicates what I/O
+ /*
+ * x86 can have a finegrained bitmap which indicates what I/O
* ports the process can use. We set it to the end of our
- * structure, meaning "none". */
+ * structure, meaning "none".
+ */
state->guest_tss.io_bitmap_base = sizeof(state->guest_tss);
- /* Some GDT entries are the same across all Guests, so we can
- * set them up now. */
+ /*
+ * Some GDT entries are the same across all Guests, so we can
+ * set them up now.
+ */
setup_default_gdt_entries(state);
/* Most IDT entries are the same for all Guests, too.*/
setup_default_idt_entries(state, default_idt_entries);
- /* The Host needs to be able to use the LGUEST segments on this
- * CPU, too, so put them in the Host GDT. */
+ /*
+ * The Host needs to be able to use the LGUEST segments on this
+ * CPU, too, so put them in the Host GDT.
+ */
get_cpu_gdt_table(i)[GDT_ENTRY_LGUEST_CS] = FULL_EXEC_SEGMENT;
get_cpu_gdt_table(i)[GDT_ENTRY_LGUEST_DS] = FULL_SEGMENT;
}
- /* In the Switcher, we want the %cs segment register to use the
+ /*
+ * In the Switcher, we want the %cs segment register to use the
* LGUEST_CS GDT entry: we've put that in the Host and Guest GDTs, so
* it will be undisturbed when we switch. To change %cs and jump we
- * need this structure to feed to Intel's "lcall" instruction. */
+ * need this structure to feed to Intel's "lcall" instruction.
+ */
lguest_entry.offset = (long)switch_to_guest + switcher_offset();
lguest_entry.segment = LGUEST_CS;
- /* Finally, we need to turn off "Page Global Enable". PGE is an
+ /*
+ * Finally, we need to turn off "Page Global Enable". PGE is an
* optimization where page table entries are specially marked to show
* they never change. The Host kernel marks all the kernel pages this
* way because it's always present, even when userspace is running.
@@ -534,16 +632,21 @@ void __init lguest_arch_host_init(void)
* you'll get really weird bugs that you'll chase for two days.
*
* I used to turn PGE off every time we switched to the Guest and back
- * on when we return, but that slowed the Switcher down noticibly. */
+ * on when we return, but that slowed the Switcher down noticibly.
+ */
- /* We don't need the complexity of CPUs coming and going while we're
- * doing this. */
+ /*
+ * We don't need the complexity of CPUs coming and going while we're
+ * doing this.
+ */
get_online_cpus();
if (cpu_has_pge) { /* We have a broader idea of "global". */
/* Remember that this was originally set (for cleanup). */
cpu_had_pge = 1;
- /* adjust_pge is a helper function which sets or unsets the PGE
- * bit on its CPU, depending on the argument (0 == unset). */
+ /*
+ * adjust_pge is a helper function which sets or unsets the PGE
+ * bit on its CPU, depending on the argument (0 == unset).
+ */
on_each_cpu(adjust_pge, (void *)0, 1);
/* Turn off the feature in the global feature set. */
clear_cpu_cap(&boot_cpu_data, X86_FEATURE_PGE);
@@ -590,26 +693,32 @@ int lguest_arch_init_hypercalls(struct lg_cpu *cpu)
{
u32 tsc_speed;
- /* The pointer to the Guest's "struct lguest_data" is the only argument.
- * We check that address now. */
+ /*
+ * The pointer to the Guest's "struct lguest_data" is the only argument.
+ * We check that address now.
+ */
if (!lguest_address_ok(cpu->lg, cpu->hcall->arg1,
sizeof(*cpu->lg->lguest_data)))
return -EFAULT;
- /* Having checked it, we simply set lg->lguest_data to point straight
+ /*
+ * Having checked it, we simply set lg->lguest_data to point straight
* into the Launcher's memory at the right place and then use
* copy_to_user/from_user from now on, instead of lgread/write. I put
* this in to show that I'm not immune to writing stupid
- * optimizations. */
+ * optimizations.
+ */
cpu->lg->lguest_data = cpu->lg->mem_base + cpu->hcall->arg1;
- /* We insist that the Time Stamp Counter exist and doesn't change with
+ /*
+ * We insist that the Time Stamp Counter exist and doesn't change with
* cpu frequency. Some devious chip manufacturers decided that TSC
* changes could be handled in software. I decided that time going
* backwards might be good for benchmarks, but it's bad for users.
*
* We also insist that the TSC be stable: the kernel detects unreliable
- * TSCs for its own purposes, and we use that here. */
+ * TSCs for its own purposes, and we use that here.
+ */
if (boot_cpu_has(X86_FEATURE_CONSTANT_TSC) && !check_tsc_unstable())
tsc_speed = tsc_khz;
else
@@ -625,38 +734,47 @@ int lguest_arch_init_hypercalls(struct lg_cpu *cpu)
}
/*:*/
-/*L:030 lguest_arch_setup_regs()
+/*L:030
+ * lguest_arch_setup_regs()
*
* Most of the Guest's registers are left alone: we used get_zeroed_page() to
- * allocate the structure, so they will be 0. */
+ * allocate the structure, so they will be 0.
+ */
void lguest_arch_setup_regs(struct lg_cpu *cpu, unsigned long start)
{
struct lguest_regs *regs = cpu->regs;
- /* There are four "segment" registers which the Guest needs to boot:
+ /*
+ * There are four "segment" registers which the Guest needs to boot:
* The "code segment" register (cs) refers to the kernel code segment
* __KERNEL_CS, and the "data", "extra" and "stack" segment registers
* refer to the kernel data segment __KERNEL_DS.
*
* The privilege level is packed into the lower bits. The Guest runs
- * at privilege level 1 (GUEST_PL).*/
+ * at privilege level 1 (GUEST_PL).
+ */
regs->ds = regs->es = regs->ss = __KERNEL_DS|GUEST_PL;
regs->cs = __KERNEL_CS|GUEST_PL;
- /* The "eflags" register contains miscellaneous flags. Bit 1 (0x002)
+ /*
+ * The "eflags" register contains miscellaneous flags. Bit 1 (0x002)
* is supposed to always be "1". Bit 9 (0x200) controls whether
* interrupts are enabled. We always leave interrupts enabled while
- * running the Guest. */
+ * running the Guest.
+ */
regs->eflags = X86_EFLAGS_IF | 0x2;
- /* The "Extended Instruction Pointer" register says where the Guest is
- * running. */
+ /*
+ * The "Extended Instruction Pointer" register says where the Guest is
+ * running.
+ */
regs->eip = start;
- /* %esi points to our boot information, at physical address 0, so don't
- * touch it. */
+ /*
+ * %esi points to our boot information, at physical address 0, so don't
+ * touch it.
+ */
- /* There are a couple of GDT entries the Guest expects when first
- * booting. */
+ /* There are a couple of GDT entries the Guest expects at boot. */
setup_guest_gdt(cpu);
}
diff --git a/drivers/lguest/x86/switcher_32.S b/drivers/lguest/x86/switcher_32.S
index 3fc15318a80..40634b0db9f 100644
--- a/drivers/lguest/x86/switcher_32.S
+++ b/drivers/lguest/x86/switcher_32.S
@@ -1,12 +1,15 @@
-/*P:900 This is the Switcher: code which sits at 0xFFC00000 astride both the
- * Host and Guest to do the low-level Guest<->Host switch. It is as simple as
- * it can be made, but it's naturally very specific to x86.
+/*P:900
+ * This is the Switcher: code which sits at 0xFFC00000 (or 0xFFE00000) astride
+ * both the Host and Guest to do the low-level Guest<->Host switch. It is as
+ * simple as it can be made, but it's naturally very specific to x86.
*
* You have now completed Preparation. If this has whet your appetite; if you
* are feeling invigorated and refreshed then the next, more challenging stage
- * can be found in "make Guest". :*/
+ * can be found in "make Guest".
+ :*/
-/*M:012 Lguest is meant to be simple: my rule of thumb is that 1% more LOC must
+/*M:012
+ * Lguest is meant to be simple: my rule of thumb is that 1% more LOC must
* gain at least 1% more performance. Since neither LOC nor performance can be
* measured beforehand, it generally means implementing a feature then deciding
* if it's worth it. And once it's implemented, who can say no?
@@ -31,11 +34,14 @@
* Host (which is actually really easy).
*
* Two questions remain. Would the performance gain outweigh the complexity?
- * And who would write the verse documenting it? :*/
+ * And who would write the verse documenting it?
+:*/
-/*M:011 Lguest64 handles NMI. This gave me NMI envy (until I looked at their
+/*M:011
+ * Lguest64 handles NMI. This gave me NMI envy (until I looked at their
* code). It's worth doing though, since it would let us use oprofile in the
- * Host when a Guest is running. :*/
+ * Host when a Guest is running.
+:*/
/*S:100
* Welcome to the Switcher itself!
diff --git a/drivers/md/linear.c b/drivers/md/linear.c
index 5810fa906af..5fe39c2a3d2 100644
--- a/drivers/md/linear.c
+++ b/drivers/md/linear.c
@@ -220,6 +220,7 @@ static int linear_run (mddev_t *mddev)
mddev->queue->unplug_fn = linear_unplug;
mddev->queue->backing_dev_info.congested_fn = linear_congested;
mddev->queue->backing_dev_info.congested_data = mddev;
+ md_integrity_register(mddev);
return 0;
}
@@ -256,6 +257,7 @@ static int linear_add(mddev_t *mddev, mdk_rdev_t *rdev)
rcu_assign_pointer(mddev->private, newconf);
md_set_array_sectors(mddev, linear_size(mddev, 0, 0));
set_capacity(mddev->gendisk, mddev->array_sectors);
+ revalidate_disk(mddev->gendisk);
call_rcu(&oldconf->rcu, free_conf);
return 0;
}
diff --git a/drivers/md/md.c b/drivers/md/md.c
index d4351ff0849..103f2d33fa8 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -359,6 +359,7 @@ static mddev_t * mddev_find(dev_t unit)
else
new->md_minor = MINOR(unit) >> MdpMinorShift;
+ mutex_init(&new->open_mutex);
mutex_init(&new->reconfig_mutex);
INIT_LIST_HEAD(&new->disks);
INIT_LIST_HEAD(&new->all_mddevs);
@@ -1308,7 +1309,12 @@ static int super_1_validate(mddev_t *mddev, mdk_rdev_t *rdev)
}
if (mddev->level != LEVEL_MULTIPATH) {
int role;
- role = le16_to_cpu(sb->dev_roles[rdev->desc_nr]);
+ if (rdev->desc_nr < 0 ||
+ rdev->desc_nr >= le32_to_cpu(sb->max_dev)) {
+ role = 0xffff;
+ rdev->desc_nr = -1;
+ } else
+ role = le16_to_cpu(sb->dev_roles[rdev->desc_nr]);
switch(role) {
case 0xffff: /* spare */
break;
@@ -1394,8 +1400,14 @@ static void super_1_sync(mddev_t *mddev, mdk_rdev_t *rdev)
if (rdev2->desc_nr+1 > max_dev)
max_dev = rdev2->desc_nr+1;
- if (max_dev > le32_to_cpu(sb->max_dev))
+ if (max_dev > le32_to_cpu(sb->max_dev)) {
+ int bmask;
sb->max_dev = cpu_to_le32(max_dev);
+ rdev->sb_size = max_dev * 2 + 256;
+ bmask = queue_logical_block_size(rdev->bdev->bd_disk->queue)-1;
+ if (rdev->sb_size & bmask)
+ rdev->sb_size = (rdev->sb_size | bmask) + 1;
+ }
for (i=0; i<max_dev;i++)
sb->dev_roles[i] = cpu_to_le16(0xfffe);
@@ -1487,37 +1499,76 @@ static int match_mddev_units(mddev_t *mddev1, mddev_t *mddev2)
static LIST_HEAD(pending_raid_disks);
-static void md_integrity_check(mdk_rdev_t *rdev, mddev_t *mddev)
+/*
+ * Try to register data integrity profile for an mddev
+ *
+ * This is called when an array is started and after a disk has been kicked
+ * from the array. It only succeeds if all working and active component devices
+ * are integrity capable with matching profiles.
+ */
+int md_integrity_register(mddev_t *mddev)
+{
+ mdk_rdev_t *rdev, *reference = NULL;
+
+ if (list_empty(&mddev->disks))
+ return 0; /* nothing to do */
+ if (blk_get_integrity(mddev->gendisk))
+ return 0; /* already registered */
+ list_for_each_entry(rdev, &mddev->disks, same_set) {
+ /* skip spares and non-functional disks */
+ if (test_bit(Faulty, &rdev->flags))
+ continue;
+ if (rdev->raid_disk < 0)
+ continue;
+ /*
+ * If at least one rdev is not integrity capable, we can not
+ * enable data integrity for the md device.
+ */
+ if (!bdev_get_integrity(rdev->bdev))
+ return -EINVAL;
+ if (!reference) {
+ /* Use the first rdev as the reference */
+ reference = rdev;
+ continue;
+ }
+ /* does this rdev's profile match the reference profile? */
+ if (blk_integrity_compare(reference->bdev->bd_disk,
+ rdev->bdev->bd_disk) < 0)
+ return -EINVAL;
+ }
+ /*
+ * All component devices are integrity capable and have matching
+ * profiles, register the common profile for the md device.
+ */
+ if (blk_integrity_register(mddev->gendisk,
+ bdev_get_integrity(reference->bdev)) != 0) {
+ printk(KERN_ERR "md: failed to register integrity for %s\n",
+ mdname(mddev));
+ return -EINVAL;
+ }
+ printk(KERN_NOTICE "md: data integrity on %s enabled\n",
+ mdname(mddev));
+ return 0;
+}
+EXPORT_SYMBOL(md_integrity_register);
+
+/* Disable data integrity if non-capable/non-matching disk is being added */
+void md_integrity_add_rdev(mdk_rdev_t *rdev, mddev_t *mddev)
{
- struct mdk_personality *pers = mddev->pers;
- struct gendisk *disk = mddev->gendisk;
struct blk_integrity *bi_rdev = bdev_get_integrity(rdev->bdev);
- struct blk_integrity *bi_mddev = blk_get_integrity(disk);
+ struct blk_integrity *bi_mddev = blk_get_integrity(mddev->gendisk);
- /* Data integrity passthrough not supported on RAID 4, 5 and 6 */
- if (pers && pers->level >= 4 && pers->level <= 6)
+ if (!bi_mddev) /* nothing to do */
return;
-
- /* If rdev is integrity capable, register profile for mddev */
- if (!bi_mddev && bi_rdev) {
- if (blk_integrity_register(disk, bi_rdev))
- printk(KERN_ERR "%s: %s Could not register integrity!\n",
- __func__, disk->disk_name);
- else
- printk(KERN_NOTICE "Enabling data integrity on %s\n",
- disk->disk_name);
+ if (rdev->raid_disk < 0) /* skip spares */
return;
- }
-
- /* Check that mddev and rdev have matching profiles */
- if (blk_integrity_compare(disk, rdev->bdev->bd_disk) < 0) {
- printk(KERN_ERR "%s: %s/%s integrity mismatch!\n", __func__,
- disk->disk_name, rdev->bdev->bd_disk->disk_name);
- printk(KERN_NOTICE "Disabling data integrity on %s\n",
- disk->disk_name);
- blk_integrity_unregister(disk);
- }
+ if (bi_rdev && blk_integrity_compare(mddev->gendisk,
+ rdev->bdev->bd_disk) >= 0)
+ return;
+ printk(KERN_NOTICE "disabling data integrity on %s\n", mdname(mddev));
+ blk_integrity_unregister(mddev->gendisk);
}
+EXPORT_SYMBOL(md_integrity_add_rdev);
static int bind_rdev_to_array(mdk_rdev_t * rdev, mddev_t * mddev)
{
@@ -1591,7 +1642,6 @@ static int bind_rdev_to_array(mdk_rdev_t * rdev, mddev_t * mddev)
/* May as well allow recovery to be retried once */
mddev->recovery_disabled = 0;
- md_integrity_check(rdev, mddev);
return 0;
fail:
@@ -1925,17 +1975,14 @@ repeat:
/* otherwise we have to go forward and ... */
mddev->events ++;
if (!mddev->in_sync || mddev->recovery_cp != MaxSector) { /* not clean */
- /* .. if the array isn't clean, insist on an odd 'events' */
- if ((mddev->events&1)==0) {
- mddev->events++;
+ /* .. if the array isn't clean, an 'even' event must also go
+ * to spares. */
+ if ((mddev->events&1)==0)
nospares = 0;
- }
} else {
- /* otherwise insist on an even 'events' (for clean states) */
- if ((mddev->events&1)) {
- mddev->events++;
+ /* otherwise an 'odd' event must go to spares */
+ if ((mddev->events&1))
nospares = 0;
- }
}
}
@@ -2657,6 +2704,7 @@ level_store(mddev_t *mddev, const char *buf, size_t len)
ssize_t rv = len;
struct mdk_personality *pers;
void *priv;
+ mdk_rdev_t *rdev;
if (mddev->pers == NULL) {
if (len == 0)
@@ -2736,6 +2784,12 @@ level_store(mddev_t *mddev, const char *buf, size_t len)
mddev_suspend(mddev);
mddev->pers->stop(mddev);
module_put(mddev->pers->owner);
+ /* Invalidate devices that are now superfluous */
+ list_for_each_entry(rdev, &mddev->disks, same_set)
+ if (rdev->raid_disk >= mddev->raid_disks) {
+ rdev->raid_disk = -1;
+ clear_bit(In_sync, &rdev->flags);
+ }
mddev->pers = pers;
mddev->private = priv;
strlcpy(mddev->clevel, pers->name, sizeof(mddev->clevel));
@@ -3545,6 +3599,7 @@ max_sync_store(mddev_t *mddev, const char *buf, size_t len)
if (max < mddev->resync_min)
return -EINVAL;
if (max < mddev->resync_max &&
+ mddev->ro == 0 &&
test_bit(MD_RECOVERY_RUNNING, &mddev->recovery))
return -EBUSY;
@@ -3685,17 +3740,8 @@ array_size_store(mddev_t *mddev, const char *buf, size_t len)
mddev->array_sectors = sectors;
set_capacity(mddev->gendisk, mddev->array_sectors);
- if (mddev->pers) {
- struct block_device *bdev = bdget_disk(mddev->gendisk, 0);
-
- if (bdev) {
- mutex_lock(&bdev->bd_inode->i_mutex);
- i_size_write(bdev->bd_inode,
- (loff_t)mddev->array_sectors << 9);
- mutex_unlock(&bdev->bd_inode->i_mutex);
- bdput(bdev);
- }
- }
+ if (mddev->pers)
+ revalidate_disk(mddev->gendisk);
return len;
}
@@ -4048,10 +4094,6 @@ static int do_md_run(mddev_t * mddev)
}
strlcpy(mddev->clevel, pers->name, sizeof(mddev->clevel));
- if (pers->level >= 4 && pers->level <= 6)
- /* Cannot support integrity (yet) */
- blk_integrity_unregister(mddev->gendisk);
-
if (mddev->reshape_position != MaxSector &&
pers->start_reshape == NULL) {
/* This personality cannot handle reshaping... */
@@ -4189,6 +4231,7 @@ static int do_md_run(mddev_t * mddev)
md_wakeup_thread(mddev->thread);
md_wakeup_thread(mddev->sync_thread); /* possibly kick off a reshape */
+ revalidate_disk(mddev->gendisk);
mddev->changed = 1;
md_new_event(mddev);
sysfs_notify_dirent(mddev->sysfs_state);
@@ -4260,12 +4303,11 @@ static int do_md_stop(mddev_t * mddev, int mode, int is_open)
struct gendisk *disk = mddev->gendisk;
mdk_rdev_t *rdev;
+ mutex_lock(&mddev->open_mutex);
if (atomic_read(&mddev->openers) > is_open) {
printk("md: %s still in use.\n",mdname(mddev));
- return -EBUSY;
- }
-
- if (mddev->pers) {
+ err = -EBUSY;
+ } else if (mddev->pers) {
if (mddev->sync_thread) {
set_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
@@ -4323,7 +4365,10 @@ static int do_md_stop(mddev_t * mddev, int mode, int is_open)
set_disk_ro(disk, 1);
clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
}
-
+out:
+ mutex_unlock(&mddev->open_mutex);
+ if (err)
+ return err;
/*
* Free resources if final stop
*/
@@ -4389,7 +4434,6 @@ static int do_md_stop(mddev_t * mddev, int mode, int is_open)
blk_integrity_unregister(disk);
md_new_event(mddev);
sysfs_notify_dirent(mddev->sysfs_state);
-out:
return err;
}
@@ -5087,18 +5131,8 @@ static int update_size(mddev_t *mddev, sector_t num_sectors)
return -ENOSPC;
}
rv = mddev->pers->resize(mddev, num_sectors);
- if (!rv) {
- struct block_device *bdev;
-
- bdev = bdget_disk(mddev->gendisk, 0);
- if (bdev) {
- mutex_lock(&bdev->bd_inode->i_mutex);
- i_size_write(bdev->bd_inode,
- (loff_t)mddev->array_sectors << 9);
- mutex_unlock(&bdev->bd_inode->i_mutex);
- bdput(bdev);
- }
- }
+ if (!rv)
+ revalidate_disk(mddev->gendisk);
return rv;
}
@@ -5484,12 +5518,12 @@ static int md_open(struct block_device *bdev, fmode_t mode)
}
BUG_ON(mddev != bdev->bd_disk->private_data);
- if ((err = mutex_lock_interruptible_nested(&mddev->reconfig_mutex, 1)))
+ if ((err = mutex_lock_interruptible(&mddev->open_mutex)))
goto out;
err = 0;
atomic_inc(&mddev->openers);
- mddev_unlock(mddev);
+ mutex_unlock(&mddev->open_mutex);
check_disk_change(bdev);
out:
diff --git a/drivers/md/md.h b/drivers/md/md.h
index 9430a110db9..f8fc188bc76 100644
--- a/drivers/md/md.h
+++ b/drivers/md/md.h
@@ -223,6 +223,16 @@ struct mddev_s
* so we don't loop trying */
int in_sync; /* know to not need resync */
+ /* 'open_mutex' avoids races between 'md_open' and 'do_md_stop', so
+ * that we are never stopping an array while it is open.
+ * 'reconfig_mutex' protects all other reconfiguration.
+ * These locks are separate due to conflicting interactions
+ * with bdev->bd_mutex.
+ * Lock ordering is:
+ * reconfig_mutex -> bd_mutex : e.g. do_md_run -> revalidate_disk
+ * bd_mutex -> open_mutex: e.g. __blkdev_get -> md_open
+ */
+ struct mutex open_mutex;
struct mutex reconfig_mutex;
atomic_t active; /* general refcount */
atomic_t openers; /* number of active opens */
@@ -431,5 +441,7 @@ extern int md_allow_write(mddev_t *mddev);
extern void md_wait_for_blocked_rdev(mdk_rdev_t *rdev, mddev_t *mddev);
extern void md_set_array_sectors(mddev_t *mddev, sector_t array_sectors);
extern int md_check_no_bitmap(mddev_t *mddev);
+extern int md_integrity_register(mddev_t *mddev);
+void md_integrity_add_rdev(mdk_rdev_t *rdev, mddev_t *mddev);
#endif /* _MD_MD_H */
diff --git a/drivers/md/multipath.c b/drivers/md/multipath.c
index 237fe3fd235..7140909f666 100644
--- a/drivers/md/multipath.c
+++ b/drivers/md/multipath.c
@@ -313,6 +313,7 @@ static int multipath_add_disk(mddev_t *mddev, mdk_rdev_t *rdev)
set_bit(In_sync, &rdev->flags);
rcu_assign_pointer(p->rdev, rdev);
err = 0;
+ md_integrity_add_rdev(rdev, mddev);
break;
}
@@ -345,7 +346,9 @@ static int multipath_remove_disk(mddev_t *mddev, int number)
/* lost the race, try later */
err = -EBUSY;
p->rdev = rdev;
+ goto abort;
}
+ md_integrity_register(mddev);
}
abort:
@@ -519,7 +522,7 @@ static int multipath_run (mddev_t *mddev)
mddev->queue->unplug_fn = multipath_unplug;
mddev->queue->backing_dev_info.congested_fn = multipath_congested;
mddev->queue->backing_dev_info.congested_data = mddev;
-
+ md_integrity_register(mddev);
return 0;
out_free_conf:
diff --git a/drivers/md/raid0.c b/drivers/md/raid0.c
index 335f490dcad..898e2bdfee4 100644
--- a/drivers/md/raid0.c
+++ b/drivers/md/raid0.c
@@ -351,6 +351,7 @@ static int raid0_run(mddev_t *mddev)
blk_queue_merge_bvec(mddev->queue, raid0_mergeable_bvec);
dump_zones(mddev);
+ md_integrity_register(mddev);
return 0;
}
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index 0569efba0c0..8726fd7ebce 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -1144,7 +1144,7 @@ static int raid1_add_disk(mddev_t *mddev, mdk_rdev_t *rdev)
rcu_assign_pointer(p->rdev, rdev);
break;
}
-
+ md_integrity_add_rdev(rdev, mddev);
print_conf(conf);
return err;
}
@@ -1178,7 +1178,9 @@ static int raid1_remove_disk(mddev_t *mddev, int number)
/* lost the race, try later */
err = -EBUSY;
p->rdev = rdev;
+ goto abort;
}
+ md_integrity_register(mddev);
}
abort:
@@ -2067,7 +2069,7 @@ static int run(mddev_t *mddev)
mddev->queue->unplug_fn = raid1_unplug;
mddev->queue->backing_dev_info.congested_fn = raid1_congested;
mddev->queue->backing_dev_info.congested_data = mddev;
-
+ md_integrity_register(mddev);
return 0;
out_no_mem:
@@ -2132,6 +2134,7 @@ static int raid1_resize(mddev_t *mddev, sector_t sectors)
return -EINVAL;
set_capacity(mddev->gendisk, mddev->array_sectors);
mddev->changed = 1;
+ revalidate_disk(mddev->gendisk);
if (sectors > mddev->dev_sectors &&
mddev->recovery_cp == MaxSector) {
mddev->recovery_cp = mddev->dev_sectors;
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index 7298a5e5a18..3d9020cf6f6 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -1170,6 +1170,7 @@ static int raid10_add_disk(mddev_t *mddev, mdk_rdev_t *rdev)
break;
}
+ md_integrity_add_rdev(rdev, mddev);
print_conf(conf);
return err;
}
@@ -1203,7 +1204,9 @@ static int raid10_remove_disk(mddev_t *mddev, int number)
/* lost the race, try later */
err = -EBUSY;
p->rdev = rdev;
+ goto abort;
}
+ md_integrity_register(mddev);
}
abort:
@@ -2225,6 +2228,7 @@ static int run(mddev_t *mddev)
if (conf->near_copies < mddev->raid_disks)
blk_queue_merge_bvec(mddev->queue, raid10_mergeable_bvec);
+ md_integrity_register(mddev);
return 0;
out_free_conf:
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 37835538b58..b8a2c5dc67b 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -3785,7 +3785,7 @@ static sector_t reshape_request(mddev_t *mddev, sector_t sector_nr, int *skipped
conf->reshape_progress < raid5_size(mddev, 0, 0)) {
sector_nr = raid5_size(mddev, 0, 0)
- conf->reshape_progress;
- } else if (mddev->delta_disks > 0 &&
+ } else if (mddev->delta_disks >= 0 &&
conf->reshape_progress > 0)
sector_nr = conf->reshape_progress;
sector_div(sector_nr, new_data_disks);
@@ -3999,6 +3999,9 @@ static inline sector_t sync_request(mddev_t *mddev, sector_t sector_nr, int *ski
return 0;
}
+ /* Allow raid5_quiesce to complete */
+ wait_event(conf->wait_for_overlap, conf->quiesce != 2);
+
if (test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery))
return reshape_request(mddev, sector_nr, skipped);
@@ -4316,6 +4319,15 @@ raid5_size(mddev_t *mddev, sector_t sectors, int raid_disks)
return sectors * (raid_disks - conf->max_degraded);
}
+static void free_conf(raid5_conf_t *conf)
+{
+ shrink_stripes(conf);
+ safe_put_page(conf->spare_page);
+ kfree(conf->disks);
+ kfree(conf->stripe_hashtbl);
+ kfree(conf);
+}
+
static raid5_conf_t *setup_conf(mddev_t *mddev)
{
raid5_conf_t *conf;
@@ -4447,11 +4459,7 @@ static raid5_conf_t *setup_conf(mddev_t *mddev)
abort:
if (conf) {
- shrink_stripes(conf);
- safe_put_page(conf->spare_page);
- kfree(conf->disks);
- kfree(conf->stripe_hashtbl);
- kfree(conf);
+ free_conf(conf);
return ERR_PTR(-EIO);
} else
return ERR_PTR(-ENOMEM);
@@ -4501,7 +4509,26 @@ static int run(mddev_t *mddev)
(old_disks-max_degraded));
/* here_old is the first stripe that we might need to read
* from */
- if (here_new >= here_old) {
+ if (mddev->delta_disks == 0) {
+ /* We cannot be sure it is safe to start an in-place
+ * reshape. It is only safe if user-space if monitoring
+ * and taking constant backups.
+ * mdadm always starts a situation like this in
+ * readonly mode so it can take control before
+ * allowing any writes. So just check for that.
+ */
+ if ((here_new * mddev->new_chunk_sectors !=
+ here_old * mddev->chunk_sectors) ||
+ mddev->ro == 0) {
+ printk(KERN_ERR "raid5: in-place reshape must be started"
+ " in read-only mode - aborting\n");
+ return -EINVAL;
+ }
+ } else if (mddev->delta_disks < 0
+ ? (here_new * mddev->new_chunk_sectors <=
+ here_old * mddev->chunk_sectors)
+ : (here_new * mddev->new_chunk_sectors >=
+ here_old * mddev->chunk_sectors)) {
/* Reading from the same stripe as writing to - bad */
printk(KERN_ERR "raid5: reshape_position too early for "
"auto-recovery - aborting.\n");
@@ -4629,12 +4656,8 @@ abort:
md_unregister_thread(mddev->thread);
mddev->thread = NULL;
if (conf) {
- shrink_stripes(conf);
print_raid5_conf(conf);
- safe_put_page(conf->spare_page);
- kfree(conf->disks);
- kfree(conf->stripe_hashtbl);
- kfree(conf);
+ free_conf(conf);
}
mddev->private = NULL;
printk(KERN_ALERT "raid5: failed to run raid set %s\n", mdname(mddev));
@@ -4649,13 +4672,10 @@ static int stop(mddev_t *mddev)
md_unregister_thread(mddev->thread);
mddev->thread = NULL;
- shrink_stripes(conf);
- kfree(conf->stripe_hashtbl);
mddev->queue->backing_dev_info.congested_fn = NULL;
blk_sync_queue(mddev->queue); /* the unplug fn references 'conf'*/
sysfs_remove_group(&mddev->kobj, &raid5_attrs_group);
- kfree(conf->disks);
- kfree(conf);
+ free_conf(conf);
mddev->private = NULL;
return 0;
}
@@ -4857,6 +4877,7 @@ static int raid5_resize(mddev_t *mddev, sector_t sectors)
return -EINVAL;
set_capacity(mddev->gendisk, mddev->array_sectors);
mddev->changed = 1;
+ revalidate_disk(mddev->gendisk);
if (sectors > mddev->dev_sectors && mddev->recovery_cp == MaxSector) {
mddev->recovery_cp = mddev->dev_sectors;
set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
@@ -5002,7 +5023,7 @@ static int raid5_start_reshape(mddev_t *mddev)
spin_unlock_irqrestore(&conf->device_lock, flags);
}
mddev->raid_disks = conf->raid_disks;
- mddev->reshape_position = 0;
+ mddev->reshape_position = conf->reshape_progress;
set_bit(MD_CHANGE_DEVS, &mddev->flags);
clear_bit(MD_RECOVERY_SYNC, &mddev->recovery);
@@ -5057,7 +5078,6 @@ static void end_reshape(raid5_conf_t *conf)
*/
static void raid5_finish_reshape(mddev_t *mddev)
{
- struct block_device *bdev;
raid5_conf_t *conf = mddev->private;
if (!test_bit(MD_RECOVERY_INTR, &mddev->recovery)) {
@@ -5066,15 +5086,7 @@ static void raid5_finish_reshape(mddev_t *mddev)
md_set_array_sectors(mddev, raid5_size(mddev, 0, 0));
set_capacity(mddev->gendisk, mddev->array_sectors);
mddev->changed = 1;
-
- bdev = bdget_disk(mddev->gendisk, 0);
- if (bdev) {
- mutex_lock(&bdev->bd_inode->i_mutex);
- i_size_write(bdev->bd_inode,
- (loff_t)mddev->array_sectors << 9);
- mutex_unlock(&bdev->bd_inode->i_mutex);
- bdput(bdev);
- }
+ revalidate_disk(mddev->gendisk);
} else {
int d;
mddev->degraded = conf->raid_disks;
@@ -5085,8 +5097,15 @@ static void raid5_finish_reshape(mddev_t *mddev)
mddev->degraded--;
for (d = conf->raid_disks ;
d < conf->raid_disks - mddev->delta_disks;
- d++)
- raid5_remove_disk(mddev, d);
+ d++) {
+ mdk_rdev_t *rdev = conf->disks[d].rdev;
+ if (rdev && raid5_remove_disk(mddev, d) == 0) {
+ char nm[20];
+ sprintf(nm, "rd%d", rdev->raid_disk);
+ sysfs_remove_link(&mddev->kobj, nm);
+ rdev->raid_disk = -1;
+ }
+ }
}
mddev->layout = conf->algorithm;
mddev->chunk_sectors = conf->chunk_sectors;
@@ -5106,12 +5125,18 @@ static void raid5_quiesce(mddev_t *mddev, int state)
case 1: /* stop all writes */
spin_lock_irq(&conf->device_lock);
- conf->quiesce = 1;
+ /* '2' tells resync/reshape to pause so that all
+ * active stripes can drain
+ */
+ conf->quiesce = 2;
wait_event_lock_irq(conf->wait_for_stripe,
atomic_read(&conf->active_stripes) == 0 &&
atomic_read(&conf->active_aligned_reads) == 0,
conf->device_lock, /* nothing */);
+ conf->quiesce = 1;
spin_unlock_irq(&conf->device_lock);
+ /* allow reshape to continue */
+ wake_up(&conf->wait_for_overlap);
break;
case 0: /* re-enable writes */
diff --git a/drivers/mfd/twl4030-irq.c b/drivers/mfd/twl4030-irq.c
index bae61b22501..7d430835655 100644
--- a/drivers/mfd/twl4030-irq.c
+++ b/drivers/mfd/twl4030-irq.c
@@ -180,14 +180,9 @@ static struct completion irq_event;
static int twl4030_irq_thread(void *data)
{
long irq = (long)data;
- struct irq_desc *desc = irq_to_desc(irq);
static unsigned i2c_errors;
static const unsigned max_i2c_errors = 100;
- if (!desc) {
- pr_err("twl4030: Invalid IRQ: %ld\n", irq);
- return -EINVAL;
- }
current->flags |= PF_NOFREEZE;
@@ -240,7 +235,7 @@ static int twl4030_irq_thread(void *data)
}
local_irq_enable();
- desc->chip->unmask(irq);
+ enable_irq(irq);
}
return 0;
@@ -255,25 +250,13 @@ static int twl4030_irq_thread(void *data)
* thread. All we do here is acknowledge and mask the interrupt and wakeup
* the kernel thread.
*/
-static void handle_twl4030_pih(unsigned int irq, struct irq_desc *desc)
+static irqreturn_t handle_twl4030_pih(int irq, void *devid)
{
/* Acknowledge, clear *AND* mask the interrupt... */
- desc->chip->ack(irq);
- complete(&irq_event);
-}
-
-static struct task_struct *start_twl4030_irq_thread(long irq)
-{
- struct task_struct *thread;
-
- init_completion(&irq_event);
- thread = kthread_run(twl4030_irq_thread, (void *)irq, "twl4030-irq");
- if (!thread)
- pr_err("twl4030: could not create irq %ld thread!\n", irq);
-
- return thread;
+ disable_irq_nosync(irq);
+ complete(devid);
+ return IRQ_HANDLED;
}
-
/*----------------------------------------------------------------------*/
/*
@@ -734,18 +717,28 @@ int twl_init_irq(int irq_num, unsigned irq_base, unsigned irq_end)
}
/* install an irq handler to demultiplex the TWL4030 interrupt */
- task = start_twl4030_irq_thread(irq_num);
- if (!task) {
- pr_err("twl4030: irq thread FAIL\n");
- status = -ESRCH;
- goto fail;
- }
- set_irq_data(irq_num, task);
- set_irq_chained_handler(irq_num, handle_twl4030_pih);
- return status;
+ init_completion(&irq_event);
+ status = request_irq(irq_num, handle_twl4030_pih, IRQF_DISABLED,
+ "TWL4030-PIH", &irq_event);
+ if (status < 0) {
+ pr_err("twl4030: could not claim irq%d: %d\n", irq_num, status);
+ goto fail_rqirq;
+ }
+
+ task = kthread_run(twl4030_irq_thread, (void *)irq_num, "twl4030-irq");
+ if (IS_ERR(task)) {
+ pr_err("twl4030: could not create irq %d thread!\n", irq_num);
+ status = PTR_ERR(task);
+ goto fail_kthread;
+ }
+ return status;
+fail_kthread:
+ free_irq(irq_num, &irq_event);
+fail_rqirq:
+ /* clean up twl4030_sih_setup */
fail:
for (i = irq_base; i < irq_end; i++)
set_irq_chip_and_handler(i, NULL, NULL);
diff --git a/drivers/misc/cb710/sgbuf2.c b/drivers/misc/cb710/sgbuf2.c
index d38a7acdb6e..d019746551f 100644
--- a/drivers/misc/cb710/sgbuf2.c
+++ b/drivers/misc/cb710/sgbuf2.c
@@ -114,7 +114,6 @@ static void sg_dwiter_write_slow(struct sg_mapping_iter *miter, uint32_t data)
if (!left)
return;
addr += len;
- flush_kernel_dcache_page(miter->page);
} while (sg_dwiter_next(miter));
}
@@ -142,9 +141,6 @@ void cb710_sg_dwiter_write_next_block(struct sg_mapping_iter *miter, uint32_t da
return;
} else
sg_dwiter_write_slow(miter, data);
-
- if (miter->length == miter->consumed)
- flush_kernel_dcache_page(miter->page);
}
EXPORT_SYMBOL_GPL(cb710_sg_dwiter_write_next_block);
diff --git a/drivers/mmc/host/cb710-mmc.c b/drivers/mmc/host/cb710-mmc.c
index 11efefb1af5..4e72964a7b4 100644
--- a/drivers/mmc/host/cb710-mmc.c
+++ b/drivers/mmc/host/cb710-mmc.c
@@ -278,7 +278,7 @@ static int cb710_mmc_receive(struct cb710_slot *slot, struct mmc_data *data)
if (unlikely(data->blksz & 15 && (data->blocks != 1 || data->blksz != 8)))
return -EINVAL;
- sg_miter_start(&miter, data->sg, data->sg_len, 0);
+ sg_miter_start(&miter, data->sg, data->sg_len, SG_MITER_TO_SG);
cb710_modify_port_8(slot, CB710_MMC_CONFIG2_PORT,
15, CB710_MMC_C2_READ_PIO_SIZE_MASK);
@@ -307,7 +307,7 @@ static int cb710_mmc_receive(struct cb710_slot *slot, struct mmc_data *data)
goto out;
}
out:
- cb710_sg_miter_stop_writing(&miter);
+ sg_miter_stop(&miter);
return err;
}
@@ -322,7 +322,7 @@ static int cb710_mmc_send(struct cb710_slot *slot, struct mmc_data *data)
if (unlikely(data->blocks > 1 && data->blksz & 15))
return -EINVAL;
- sg_miter_start(&miter, data->sg, data->sg_len, 0);
+ sg_miter_start(&miter, data->sg, data->sg_len, SG_MITER_FROM_SG);
cb710_modify_port_8(slot, CB710_MMC_CONFIG2_PORT,
0, CB710_MMC_C2_READ_PIO_SIZE_MASK);
diff --git a/drivers/mmc/host/imxmmc.c b/drivers/mmc/host/imxmmc.c
index e0be21a4a69..bf98d7cc928 100644
--- a/drivers/mmc/host/imxmmc.c
+++ b/drivers/mmc/host/imxmmc.c
@@ -652,7 +652,7 @@ static irqreturn_t imxmci_irq(int irq, void *devid)
set_bit(IMXMCI_PEND_STARTED_b, &host->pending_events);
tasklet_schedule(&host->tasklet);
- return IRQ_RETVAL(handled);;
+ return IRQ_RETVAL(handled);
}
static void imxmci_tasklet_fnc(unsigned long data)
diff --git a/drivers/mmc/host/sdhci-of.c b/drivers/mmc/host/sdhci-of.c
index 908844327db..1e8aa590bb3 100644
--- a/drivers/mmc/host/sdhci-of.c
+++ b/drivers/mmc/host/sdhci-of.c
@@ -234,7 +234,7 @@ static int __devinit sdhci_of_probe(struct of_device *ofdev,
return -ENODEV;
host = sdhci_alloc_host(&ofdev->dev, sizeof(*of_host));
- if (!host)
+ if (IS_ERR(host))
return -ENOMEM;
of_host = sdhci_priv(host);
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 62041c7e924..fc96f8cb9c0 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -773,8 +773,14 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data)
}
if (!(host->flags & SDHCI_REQ_USE_DMA)) {
- sg_miter_start(&host->sg_miter,
- data->sg, data->sg_len, SG_MITER_ATOMIC);
+ int flags;
+
+ flags = SG_MITER_ATOMIC;
+ if (host->data->flags & MMC_DATA_READ)
+ flags |= SG_MITER_TO_SG;
+ else
+ flags |= SG_MITER_FROM_SG;
+ sg_miter_start(&host->sg_miter, data->sg, data->sg_len, flags);
host->blocks = data->blocks;
}
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index 0b98654d8ee..7a58bd5522f 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -284,13 +284,6 @@ config MTD_L440GX
BE VERY CAREFUL.
-config MTD_SBC8240
- tristate "Flash device on SBC8240"
- depends on MTD_JEDECPROBE && 8260
- help
- Flash access on the SBC8240 board from Wind River. See
- <http://www.windriver.com/products/sbc8240/>
-
config MTD_TQM8XXL
tristate "CFI Flash device mapped on TQM8XXL"
depends on MTD_CFI && TQM8xxL
diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile
index 8bae7f9850c..5beb0662d72 100644
--- a/drivers/mtd/maps/Makefile
+++ b/drivers/mtd/maps/Makefile
@@ -50,7 +50,6 @@ obj-$(CONFIG_MTD_UCLINUX) += uclinux.o
obj-$(CONFIG_MTD_NETtel) += nettel.o
obj-$(CONFIG_MTD_SCB2_FLASH) += scb2_flash.o
obj-$(CONFIG_MTD_H720X) += h720x-flash.o
-obj-$(CONFIG_MTD_SBC8240) += sbc8240.o
obj-$(CONFIG_MTD_IXP4XX) += ixp4xx.o
obj-$(CONFIG_MTD_IXP2000) += ixp2000.o
obj-$(CONFIG_MTD_WRSBC8260) += wr_sbc82xx_flash.o
diff --git a/drivers/mtd/maps/sbc8240.c b/drivers/mtd/maps/sbc8240.c
deleted file mode 100644
index d5374cdcb16..00000000000
--- a/drivers/mtd/maps/sbc8240.c
+++ /dev/null
@@ -1,250 +0,0 @@
-/*
- * Handle mapping of the flash memory access routines on the SBC8240 board.
- *
- * Carolyn Smith, Tektronix, Inc.
- *
- * This code is GPLed
- */
-
-/*
- * The SBC8240 has 2 flash banks.
- * Bank 0 is a 512 KiB AMD AM29F040B; 8 x 64 KiB sectors.
- * It contains the U-Boot code (7 sectors) and the environment (1 sector).
- * Bank 1 is 4 x 1 MiB AMD AM29LV800BT; 15 x 64 KiB sectors, 1 x 32 KiB sector,
- * 2 x 8 KiB sectors, 1 x 16 KiB sectors.
- * Both parts are JEDEC compatible.
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <asm/io.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/cfi.h>
-
-#ifdef CONFIG_MTD_PARTITIONS
-#include <linux/mtd/partitions.h>
-#endif
-
-#define DEBUG
-
-#ifdef DEBUG
-# define debugk(fmt,args...) printk(fmt ,##args)
-#else
-# define debugk(fmt,args...)
-#endif
-
-
-#define WINDOW_ADDR0 0xFFF00000 /* 512 KiB */
-#define WINDOW_SIZE0 0x00080000
-#define BUSWIDTH0 1
-
-#define WINDOW_ADDR1 0xFF000000 /* 4 MiB */
-#define WINDOW_SIZE1 0x00400000
-#define BUSWIDTH1 8
-
-#define MSG_PREFIX "sbc8240:" /* prefix for our printk()'s */
-#define MTDID "sbc8240-%d" /* for mtdparts= partitioning */
-
-
-static struct map_info sbc8240_map[2] = {
- {
- .name = "sbc8240 Flash Bank #0",
- .size = WINDOW_SIZE0,
- .bankwidth = BUSWIDTH0,
- },
- {
- .name = "sbc8240 Flash Bank #1",
- .size = WINDOW_SIZE1,
- .bankwidth = BUSWIDTH1,
- }
-};
-
-#define NUM_FLASH_BANKS ARRAY_SIZE(sbc8240_map)
-
-/*
- * The following defines the partition layout of SBC8240 boards.
- *
- * See include/linux/mtd/partitions.h for definition of the
- * mtd_partition structure.
- *
- * The *_max_flash_size is the maximum possible mapped flash size
- * which is not necessarily the actual flash size. It must correspond
- * to the value specified in the mapping definition defined by the
- * "struct map_desc *_io_desc" for the corresponding machine.
- */
-
-#ifdef CONFIG_MTD_PARTITIONS
-
-static struct mtd_partition sbc8240_uboot_partitions [] = {
- /* Bank 0 */
- {
- .name = "U-boot", /* U-Boot Firmware */
- .offset = 0,
- .size = 0x00070000, /* 7 x 64 KiB sectors */
- .mask_flags = MTD_WRITEABLE, /* force read-only */
- },
- {
- .name = "environment", /* U-Boot environment */
- .offset = 0x00070000,
- .size = 0x00010000, /* 1 x 64 KiB sector */
- },
-};
-
-static struct mtd_partition sbc8240_fs_partitions [] = {
- {
- .name = "jffs", /* JFFS filesystem */
- .offset = 0,
- .size = 0x003C0000, /* 4 * 15 * 64KiB */
- },
- {
- .name = "tmp32",
- .offset = 0x003C0000,
- .size = 0x00020000, /* 4 * 32KiB */
- },
- {
- .name = "tmp8a",
- .offset = 0x003E0000,
- .size = 0x00008000, /* 4 * 8KiB */
- },
- {
- .name = "tmp8b",
- .offset = 0x003E8000,
- .size = 0x00008000, /* 4 * 8KiB */
- },
- {
- .name = "tmp16",
- .offset = 0x003F0000,
- .size = 0x00010000, /* 4 * 16KiB */
- }
-};
-
-/* trivial struct to describe partition information */
-struct mtd_part_def
-{
- int nums;
- unsigned char *type;
- struct mtd_partition* mtd_part;
-};
-
-static struct mtd_info *sbc8240_mtd[NUM_FLASH_BANKS];
-static struct mtd_part_def sbc8240_part_banks[NUM_FLASH_BANKS];
-
-
-#endif /* CONFIG_MTD_PARTITIONS */
-
-
-static int __init init_sbc8240_mtd (void)
-{
- static struct _cjs {
- u_long addr;
- u_long size;
- } pt[NUM_FLASH_BANKS] = {
- {
- .addr = WINDOW_ADDR0,
- .size = WINDOW_SIZE0
- },
- {
- .addr = WINDOW_ADDR1,
- .size = WINDOW_SIZE1
- },
- };
-
- int devicesfound = 0;
- int i,j;
-
- for (i = 0; i < NUM_FLASH_BANKS; i++) {
- printk (KERN_NOTICE MSG_PREFIX
- "Probing 0x%08lx at 0x%08lx\n", pt[i].size, pt[i].addr);
-
- sbc8240_map[i].map_priv_1 =
- (unsigned long) ioremap (pt[i].addr, pt[i].size);
- if (!sbc8240_map[i].map_priv_1) {
- printk (MSG_PREFIX "failed to ioremap\n");
- for (j = 0; j < i; j++) {
- iounmap((void *) sbc8240_map[j].map_priv_1);
- sbc8240_map[j].map_priv_1 = 0;
- }
- return -EIO;
- }
- simple_map_init(&sbc8240_mtd[i]);
-
- sbc8240_mtd[i] = do_map_probe("jedec_probe", &sbc8240_map[i]);
-
- if (sbc8240_mtd[i]) {
- sbc8240_mtd[i]->module = THIS_MODULE;
- devicesfound++;
- } else {
- if (sbc8240_map[i].map_priv_1) {
- iounmap((void *) sbc8240_map[i].map_priv_1);
- sbc8240_map[i].map_priv_1 = 0;
- }
- }
- }
-
- if (!devicesfound) {
- printk(KERN_NOTICE MSG_PREFIX
- "No suppported flash chips found!\n");
- return -ENXIO;
- }
-
-#ifdef CONFIG_MTD_PARTITIONS
- sbc8240_part_banks[0].mtd_part = sbc8240_uboot_partitions;
- sbc8240_part_banks[0].type = "static image";
- sbc8240_part_banks[0].nums = ARRAY_SIZE(sbc8240_uboot_partitions);
- sbc8240_part_banks[1].mtd_part = sbc8240_fs_partitions;
- sbc8240_part_banks[1].type = "static file system";
- sbc8240_part_banks[1].nums = ARRAY_SIZE(sbc8240_fs_partitions);
-
- for (i = 0; i < NUM_FLASH_BANKS; i++) {
-
- if (!sbc8240_mtd[i]) continue;
- if (sbc8240_part_banks[i].nums == 0) {
- printk (KERN_NOTICE MSG_PREFIX
- "No partition info available, registering whole device\n");
- add_mtd_device(sbc8240_mtd[i]);
- } else {
- printk (KERN_NOTICE MSG_PREFIX
- "Using %s partition definition\n", sbc8240_part_banks[i].mtd_part->name);
- add_mtd_partitions (sbc8240_mtd[i],
- sbc8240_part_banks[i].mtd_part,
- sbc8240_part_banks[i].nums);
- }
- }
-#else
- printk(KERN_NOTICE MSG_PREFIX
- "Registering %d flash banks at once\n", devicesfound);
-
- for (i = 0; i < devicesfound; i++) {
- add_mtd_device(sbc8240_mtd[i]);
- }
-#endif /* CONFIG_MTD_PARTITIONS */
-
- return devicesfound == 0 ? -ENXIO : 0;
-}
-
-static void __exit cleanup_sbc8240_mtd (void)
-{
- int i;
-
- for (i = 0; i < NUM_FLASH_BANKS; i++) {
- if (sbc8240_mtd[i]) {
- del_mtd_device (sbc8240_mtd[i]);
- map_destroy (sbc8240_mtd[i]);
- }
- if (sbc8240_map[i].map_priv_1) {
- iounmap ((void *) sbc8240_map[i].map_priv_1);
- sbc8240_map[i].map_priv_1 = 0;
- }
- }
-}
-
-module_init (init_sbc8240_mtd);
-module_exit (cleanup_sbc8240_mtd);
-
-MODULE_LICENSE ("GPL");
-MODULE_AUTHOR ("Carolyn Smith <carolyn.smith@tektronix.com>");
-MODULE_DESCRIPTION ("MTD map driver for SBC8240 boards");
-
diff --git a/drivers/mtd/mtd_blkdevs.c b/drivers/mtd/mtd_blkdevs.c
index c3f62654b6d..7baba40c1ed 100644
--- a/drivers/mtd/mtd_blkdevs.c
+++ b/drivers/mtd/mtd_blkdevs.c
@@ -144,7 +144,7 @@ static int blktrans_open(struct block_device *bdev, fmode_t mode)
struct mtd_blktrans_ops *tr = dev->tr;
int ret = -ENODEV;
- if (!try_module_get(dev->mtd->owner))
+ if (!get_mtd_device(NULL, dev->mtd->index))
goto out;
if (!try_module_get(tr->owner))
@@ -158,7 +158,7 @@ static int blktrans_open(struct block_device *bdev, fmode_t mode)
ret = 0;
if (tr->open && (ret = tr->open(dev))) {
dev->mtd->usecount--;
- module_put(dev->mtd->owner);
+ put_mtd_device(dev->mtd);
out_tr:
module_put(tr->owner);
}
@@ -177,7 +177,7 @@ static int blktrans_release(struct gendisk *disk, fmode_t mode)
if (!ret) {
dev->mtd->usecount--;
- module_put(dev->mtd->owner);
+ put_mtd_device(dev->mtd);
module_put(tr->owner);
}
diff --git a/drivers/mtd/mtdblock.c b/drivers/mtd/mtdblock.c
index 208c6faa035..77db5ce24d9 100644
--- a/drivers/mtd/mtdblock.c
+++ b/drivers/mtd/mtdblock.c
@@ -29,6 +29,8 @@ static struct mtdblk_dev {
enum { STATE_EMPTY, STATE_CLEAN, STATE_DIRTY } cache_state;
} *mtdblks[MAX_MTD_DEVICES];
+static struct mutex mtdblks_lock;
+
/*
* Cache stuff...
*
@@ -270,15 +272,19 @@ static int mtdblock_open(struct mtd_blktrans_dev *mbd)
DEBUG(MTD_DEBUG_LEVEL1,"mtdblock_open\n");
+ mutex_lock(&mtdblks_lock);
if (mtdblks[dev]) {
mtdblks[dev]->count++;
+ mutex_unlock(&mtdblks_lock);
return 0;
}
/* OK, it's not open. Create cache info for it */
mtdblk = kzalloc(sizeof(struct mtdblk_dev), GFP_KERNEL);
- if (!mtdblk)
+ if (!mtdblk) {
+ mutex_unlock(&mtdblks_lock);
return -ENOMEM;
+ }
mtdblk->count = 1;
mtdblk->mtd = mtd;
@@ -291,6 +297,7 @@ static int mtdblock_open(struct mtd_blktrans_dev *mbd)
}
mtdblks[dev] = mtdblk;
+ mutex_unlock(&mtdblks_lock);
DEBUG(MTD_DEBUG_LEVEL1, "ok\n");
@@ -304,6 +311,8 @@ static int mtdblock_release(struct mtd_blktrans_dev *mbd)
DEBUG(MTD_DEBUG_LEVEL1, "mtdblock_release\n");
+ mutex_lock(&mtdblks_lock);
+
mutex_lock(&mtdblk->cache_mutex);
write_cached_data(mtdblk);
mutex_unlock(&mtdblk->cache_mutex);
@@ -316,6 +325,9 @@ static int mtdblock_release(struct mtd_blktrans_dev *mbd)
vfree(mtdblk->cache_data);
kfree(mtdblk);
}
+
+ mutex_unlock(&mtdblks_lock);
+
DEBUG(MTD_DEBUG_LEVEL1, "ok\n");
return 0;
@@ -376,6 +388,8 @@ static struct mtd_blktrans_ops mtdblock_tr = {
static int __init init_mtdblock(void)
{
+ mutex_init(&mtdblks_lock);
+
return register_mtd_blktrans(&mtdblock_tr);
}
diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
index fac54a3fa3f..00ebf7af746 100644
--- a/drivers/mtd/mtdcore.c
+++ b/drivers/mtd/mtdcore.c
@@ -65,8 +65,8 @@ static void mtd_release(struct device *dev)
static int mtd_cls_suspend(struct device *dev, pm_message_t state)
{
struct mtd_info *mtd = dev_to_mtd(dev);
-
- if (mtd->suspend)
+
+ if (mtd && mtd->suspend)
return mtd->suspend(mtd);
else
return 0;
@@ -76,7 +76,7 @@ static int mtd_cls_resume(struct device *dev)
{
struct mtd_info *mtd = dev_to_mtd(dev);
- if (mtd->resume)
+ if (mtd && mtd->resume)
mtd->resume(mtd);
return 0;
}
@@ -298,6 +298,7 @@ int add_mtd_device(struct mtd_info *mtd)
mtd->dev.class = &mtd_class;
mtd->dev.devt = MTD_DEVT(i);
dev_set_name(&mtd->dev, "mtd%d", i);
+ dev_set_drvdata(&mtd->dev, mtd);
if (device_register(&mtd->dev) != 0) {
mtd_table[i] = NULL;
break;
diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c
index 38d656b9b2e..0108ed42e87 100644
--- a/drivers/mtd/onenand/omap2.c
+++ b/drivers/mtd/onenand/omap2.c
@@ -266,7 +266,7 @@ static inline int omap2_onenand_bufferram_offset(struct mtd_info *mtd, int area)
if (ONENAND_CURRENT_BUFFERRAM(this)) {
if (area == ONENAND_DATARAM)
- return mtd->writesize;
+ return this->writesize;
if (area == ONENAND_SPARERAM)
return mtd->oobsize;
}
@@ -770,6 +770,7 @@ static int __devexit omap2_onenand_remove(struct platform_device *pdev)
}
iounmap(c->onenand.base);
release_mem_region(c->phys_base, ONENAND_IO_SIZE);
+ gpmc_cs_free(c->gpmc_cs);
kfree(c);
return 0;
diff --git a/drivers/mtd/ubi/eba.c b/drivers/mtd/ubi/eba.c
index 0f2034c3ed2..e4d9ef0c965 100644
--- a/drivers/mtd/ubi/eba.c
+++ b/drivers/mtd/ubi/eba.c
@@ -1254,6 +1254,7 @@ out_free:
if (!ubi->volumes[i])
continue;
kfree(ubi->volumes[i]->eba_tbl);
+ ubi->volumes[i]->eba_tbl = NULL;
}
return err;
}
diff --git a/drivers/mtd/ubi/scan.c b/drivers/mtd/ubi/scan.c
index a423131b617..b847745394b 100644
--- a/drivers/mtd/ubi/scan.c
+++ b/drivers/mtd/ubi/scan.c
@@ -781,11 +781,22 @@ static int process_eb(struct ubi_device *ubi, struct ubi_scan_info *si,
return -EINVAL;
}
+ /*
+ * Make sure that all PEBs have the same image sequence number.
+ * This allows us to detect situations when users flash UBI
+ * images incorrectly, so that the flash has the new UBI image
+ * and leftovers from the old one. This feature was added
+ * relatively recently, and the sequence number was always
+ * zero, because old UBI implementations always set it to zero.
+ * For this reasons, we do not panic if some PEBs have zero
+ * sequence number, while other PEBs have non-zero sequence
+ * number.
+ */
image_seq = be32_to_cpu(ech->image_seq);
if (!si->image_seq_set) {
ubi->image_seq = image_seq;
si->image_seq_set = 1;
- } else if (ubi->image_seq != image_seq) {
+ } else if (ubi->image_seq && ubi->image_seq != image_seq) {
ubi_err("bad image sequence number %d in PEB %d, "
"expected %d", image_seq, pnum, ubi->image_seq);
ubi_dbg_dump_ec_hdr(ech);
diff --git a/drivers/net/3c515.c b/drivers/net/3c515.c
index 3e00fa8ea65..4a7c32895be 100644
--- a/drivers/net/3c515.c
+++ b/drivers/net/3c515.c
@@ -832,7 +832,9 @@ static int corkscrew_open(struct net_device *dev)
skb_reserve(skb, 2); /* Align IP on 16 byte boundaries */
vp->rx_ring[i].addr = isa_virt_to_bus(skb->data);
}
- vp->rx_ring[i - 1].next = isa_virt_to_bus(&vp->rx_ring[0]); /* Wrap the ring. */
+ if (i != 0)
+ vp->rx_ring[i - 1].next =
+ isa_virt_to_bus(&vp->rx_ring[0]); /* Wrap the ring. */
outl(isa_virt_to_bus(&vp->rx_ring[0]), ioaddr + UpListPtr);
}
if (vp->full_bus_master_tx) { /* Boomerang bus master Tx. */
diff --git a/drivers/net/3c59x.c b/drivers/net/3c59x.c
index c34aee91250..c2041685094 100644
--- a/drivers/net/3c59x.c
+++ b/drivers/net/3c59x.c
@@ -2721,13 +2721,15 @@ dump_tx_ring(struct net_device *dev)
&vp->tx_ring[vp->dirty_tx % TX_RING_SIZE]);
issue_and_wait(dev, DownStall);
for (i = 0; i < TX_RING_SIZE; i++) {
- pr_err(" %d: @%p length %8.8x status %8.8x\n", i,
- &vp->tx_ring[i],
+ unsigned int length;
+
#if DO_ZEROCOPY
- le32_to_cpu(vp->tx_ring[i].frag[0].length),
+ length = le32_to_cpu(vp->tx_ring[i].frag[0].length);
#else
- le32_to_cpu(vp->tx_ring[i].length),
+ length = le32_to_cpu(vp->tx_ring[i].length);
#endif
+ pr_err(" %d: @%p length %8.8x status %8.8x\n",
+ i, &vp->tx_ring[i], length,
le32_to_cpu(vp->tx_ring[i].status));
}
if (!stalled)
diff --git a/drivers/net/eexpress.c b/drivers/net/eexpress.c
index 1686dca2874..1f016d66684 100644
--- a/drivers/net/eexpress.c
+++ b/drivers/net/eexpress.c
@@ -1474,13 +1474,13 @@ static void eexp_hw_init586(struct net_device *dev)
outw(0x0000, ioaddr + 0x800c);
outw(0x0000, ioaddr + 0x800e);
- for (i = 0; i < (sizeof(start_code)); i+=32) {
+ for (i = 0; i < ARRAY_SIZE(start_code) * 2; i+=32) {
int j;
outw(i, ioaddr + SM_PTR);
- for (j = 0; j < 16; j+=2)
+ for (j = 0; j < 16 && (i+j)/2 < ARRAY_SIZE(start_code); j+=2)
outw(start_code[(i+j)/2],
ioaddr+0x4000+j);
- for (j = 0; j < 16; j+=2)
+ for (j = 0; j < 16 && (i+j+16)/2 < ARRAY_SIZE(start_code); j+=2)
outw(start_code[(i+j+16)/2],
ioaddr+0x8000+j);
}
diff --git a/drivers/net/ehea/ehea.h b/drivers/net/ehea/ehea.h
index 78952f8324e..fa311a95099 100644
--- a/drivers/net/ehea/ehea.h
+++ b/drivers/net/ehea/ehea.h
@@ -40,7 +40,7 @@
#include <asm/io.h>
#define DRV_NAME "ehea"
-#define DRV_VERSION "EHEA_0101"
+#define DRV_VERSION "EHEA_0102"
/* eHEA capability flags */
#define DLPAR_PORT_ADD_REM 1
diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c
index e8d46cc1bec..977c3d35827 100644
--- a/drivers/net/ehea/ehea_main.c
+++ b/drivers/net/ehea/ehea_main.c
@@ -1545,6 +1545,9 @@ static int ehea_clean_portres(struct ehea_port *port, struct ehea_port_res *pr)
{
int ret, i;
+ if (pr->qp)
+ netif_napi_del(&pr->napi);
+
ret = ehea_destroy_qp(pr->qp);
if (!ret) {
diff --git a/drivers/net/gianfar_ethtool.c b/drivers/net/gianfar_ethtool.c
index dbf06e9313c..2234118eedb 100644
--- a/drivers/net/gianfar_ethtool.c
+++ b/drivers/net/gianfar_ethtool.c
@@ -366,9 +366,8 @@ static int gfar_scoalesce(struct net_device *dev, struct ethtool_coalesce *cvals
return -EINVAL;
}
- priv->rxic = mk_ic_value(
- gfar_usecs2ticks(priv, cvals->rx_coalesce_usecs),
- cvals->rx_max_coalesced_frames);
+ priv->rxic = mk_ic_value(cvals->rx_max_coalesced_frames,
+ gfar_usecs2ticks(priv, cvals->rx_coalesce_usecs));
/* Set up tx coalescing */
if ((cvals->tx_coalesce_usecs == 0) ||
@@ -390,9 +389,8 @@ static int gfar_scoalesce(struct net_device *dev, struct ethtool_coalesce *cvals
return -EINVAL;
}
- priv->txic = mk_ic_value(
- gfar_usecs2ticks(priv, cvals->tx_coalesce_usecs),
- cvals->tx_max_coalesced_frames);
+ priv->txic = mk_ic_value(cvals->tx_max_coalesced_frames,
+ gfar_usecs2ticks(priv, cvals->tx_coalesce_usecs));
gfar_write(&priv->regs->rxic, 0);
if (priv->rxcoalescing)
diff --git a/drivers/net/igbvf/vf.c b/drivers/net/igbvf/vf.c
index 2a4faf9ade6..a9a61efa964 100644
--- a/drivers/net/igbvf/vf.c
+++ b/drivers/net/igbvf/vf.c
@@ -274,6 +274,8 @@ static s32 e1000_set_vfta_vf(struct e1000_hw *hw, u16 vid, bool set)
err = mbx->ops.read_posted(hw, msgbuf, 2);
+ msgbuf[0] &= ~E1000_VT_MSGTYPE_CTS;
+
/* if nacked the vlan was rejected */
if (!err && (msgbuf[0] == (E1000_VF_SET_VLAN | E1000_VT_MSGTYPE_NACK)))
err = -E1000_ERR_MAC_INIT;
@@ -317,6 +319,8 @@ static void e1000_rar_set_vf(struct e1000_hw *hw, u8 * addr, u32 index)
if (!ret_val)
ret_val = mbx->ops.read_posted(hw, msgbuf, 3);
+ msgbuf[0] &= ~E1000_VT_MSGTYPE_CTS;
+
/* if nacked the address was rejected, use "perm_addr" */
if (!ret_val &&
(msgbuf[0] == (E1000_VF_SET_MAC_ADDR | E1000_VT_MSGTYPE_NACK)))
diff --git a/drivers/net/ixgbe/ixgbe.h b/drivers/net/ixgbe/ixgbe.h
index 1b12c7ba275..e11d83d5852 100644
--- a/drivers/net/ixgbe/ixgbe.h
+++ b/drivers/net/ixgbe/ixgbe.h
@@ -96,6 +96,8 @@
#define IXGBE_TX_FLAGS_VLAN_PRIO_MASK 0x0000e000
#define IXGBE_TX_FLAGS_VLAN_SHIFT 16
+#define IXGBE_MAX_RSC_INT_RATE 162760
+
/* wrapper around a pointer to a socket buffer,
* so a DMA handle can be stored along with the buffer */
struct ixgbe_tx_buffer {
diff --git a/drivers/net/ixgbe/ixgbe_82598.c b/drivers/net/ixgbe/ixgbe_82598.c
index b9923047ce1..522c03bc1da 100644
--- a/drivers/net/ixgbe/ixgbe_82598.c
+++ b/drivers/net/ixgbe/ixgbe_82598.c
@@ -50,6 +50,51 @@ static s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset,
u8 *eeprom_data);
/**
+ * ixgbe_set_pcie_completion_timeout - set pci-e completion timeout
+ * @hw: pointer to the HW structure
+ *
+ * The defaults for 82598 should be in the range of 50us to 50ms,
+ * however the hardware default for these parts is 500us to 1ms which is less
+ * than the 10ms recommended by the pci-e spec. To address this we need to
+ * increase the value to either 10ms to 250ms for capability version 1 config,
+ * or 16ms to 55ms for version 2.
+ **/
+void ixgbe_set_pcie_completion_timeout(struct ixgbe_hw *hw)
+{
+ struct ixgbe_adapter *adapter = hw->back;
+ u32 gcr = IXGBE_READ_REG(hw, IXGBE_GCR);
+ u16 pcie_devctl2;
+
+ /* only take action if timeout value is defaulted to 0 */
+ if (gcr & IXGBE_GCR_CMPL_TMOUT_MASK)
+ goto out;
+
+ /*
+ * if capababilities version is type 1 we can write the
+ * timeout of 10ms to 250ms through the GCR register
+ */
+ if (!(gcr & IXGBE_GCR_CAP_VER2)) {
+ gcr |= IXGBE_GCR_CMPL_TMOUT_10ms;
+ goto out;
+ }
+
+ /*
+ * for version 2 capabilities we need to write the config space
+ * directly in order to set the completion timeout value for
+ * 16ms to 55ms
+ */
+ pci_read_config_word(adapter->pdev,
+ IXGBE_PCI_DEVICE_CONTROL2, &pcie_devctl2);
+ pcie_devctl2 |= IXGBE_PCI_DEVICE_CONTROL2_16ms;
+ pci_write_config_word(adapter->pdev,
+ IXGBE_PCI_DEVICE_CONTROL2, pcie_devctl2);
+out:
+ /* disable completion timeout resend */
+ gcr &= ~IXGBE_GCR_CMPL_TMOUT_RESEND;
+ IXGBE_WRITE_REG(hw, IXGBE_GCR, gcr);
+}
+
+/**
* ixgbe_get_pcie_msix_count_82598 - Gets MSI-X vector count
* @hw: pointer to hardware structure
*
@@ -153,6 +198,26 @@ out:
}
/**
+ * ixgbe_start_hw_82598 - Prepare hardware for Tx/Rx
+ * @hw: pointer to hardware structure
+ *
+ * Starts the hardware using the generic start_hw function.
+ * Then set pcie completion timeout
+ **/
+s32 ixgbe_start_hw_82598(struct ixgbe_hw *hw)
+{
+ s32 ret_val = 0;
+
+ ret_val = ixgbe_start_hw_generic(hw);
+
+ /* set the completion timeout for interface */
+ if (ret_val == 0)
+ ixgbe_set_pcie_completion_timeout(hw);
+
+ return ret_val;
+}
+
+/**
* ixgbe_get_link_capabilities_82598 - Determines link capabilities
* @hw: pointer to hardware structure
* @speed: pointer to link speed
@@ -1085,7 +1150,7 @@ out:
static struct ixgbe_mac_operations mac_ops_82598 = {
.init_hw = &ixgbe_init_hw_generic,
.reset_hw = &ixgbe_reset_hw_82598,
- .start_hw = &ixgbe_start_hw_generic,
+ .start_hw = &ixgbe_start_hw_82598,
.clear_hw_cntrs = &ixgbe_clear_hw_cntrs_generic,
.get_media_type = &ixgbe_get_media_type_82598,
.get_supported_physical_layer = &ixgbe_get_supported_physical_layer_82598,
diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c
index 2a978008fd6..79144e950a3 100644
--- a/drivers/net/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ixgbe/ixgbe_ethtool.c
@@ -1975,7 +1975,10 @@ static int ixgbe_set_coalesce(struct net_device *netdev,
* any other value means disable eitr, which is best
* served by setting the interrupt rate very high
*/
- adapter->eitr_param = IXGBE_MAX_INT_RATE;
+ if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED)
+ adapter->eitr_param = IXGBE_MAX_RSC_INT_RATE;
+ else
+ adapter->eitr_param = IXGBE_MAX_INT_RATE;
adapter->itr_setting = 0;
}
@@ -1999,13 +2002,13 @@ static int ixgbe_set_flags(struct net_device *netdev, u32 data)
ethtool_op_set_flags(netdev, data);
- if (!(adapter->flags & IXGBE_FLAG2_RSC_CAPABLE))
+ if (!(adapter->flags2 & IXGBE_FLAG2_RSC_CAPABLE))
return 0;
/* if state changes we need to update adapter->flags and reset */
if ((!!(data & ETH_FLAG_LRO)) !=
- (!!(adapter->flags & IXGBE_FLAG2_RSC_ENABLED))) {
- adapter->flags ^= IXGBE_FLAG2_RSC_ENABLED;
+ (!!(adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED))) {
+ adapter->flags2 ^= IXGBE_FLAG2_RSC_ENABLED;
if (netif_running(netdev))
ixgbe_reinit_locked(adapter);
else
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index 200454f30f6..110c65ab5cb 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -780,7 +780,7 @@ static bool ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector,
prefetch(next_rxd);
cleaned_count++;
- if (adapter->flags & IXGBE_FLAG2_RSC_CAPABLE)
+ if (adapter->flags2 & IXGBE_FLAG2_RSC_CAPABLE)
rsc_count = ixgbe_get_rsc_count(rx_desc);
if (rsc_count) {
@@ -2036,7 +2036,7 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter)
IXGBE_WRITE_REG(hw, IXGBE_PSRTYPE(0), psrtype);
}
} else {
- if (!(adapter->flags & IXGBE_FLAG2_RSC_ENABLED) &&
+ if (!(adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) &&
(netdev->mtu <= ETH_DATA_LEN))
rx_buf_len = MAXIMUM_ETHERNET_VLAN_SIZE;
else
@@ -2165,7 +2165,7 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter)
IXGBE_WRITE_REG(hw, IXGBE_RDRXCTL, rdrxctl);
}
- if (adapter->flags & IXGBE_FLAG2_RSC_ENABLED) {
+ if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) {
/* Enable 82599 HW-RSC */
for (i = 0; i < adapter->num_rx_queues; i++) {
j = adapter->rx_ring[i].reg_idx;
@@ -3812,8 +3812,8 @@ static int __devinit ixgbe_sw_init(struct ixgbe_adapter *adapter)
adapter->max_msix_q_vectors = MAX_MSIX_Q_VECTORS_82598;
} else if (hw->mac.type == ixgbe_mac_82599EB) {
adapter->max_msix_q_vectors = MAX_MSIX_Q_VECTORS_82599;
- adapter->flags |= IXGBE_FLAG2_RSC_CAPABLE;
- adapter->flags |= IXGBE_FLAG2_RSC_ENABLED;
+ adapter->flags2 |= IXGBE_FLAG2_RSC_CAPABLE;
+ adapter->flags2 |= IXGBE_FLAG2_RSC_ENABLED;
adapter->flags |= IXGBE_FLAG_FDIR_HASH_CAPABLE;
adapter->ring_feature[RING_F_FDIR].indices =
IXGBE_MAX_FDIR_INDICES;
@@ -5360,12 +5360,19 @@ static int ixgbe_del_sanmac_netdev(struct net_device *dev)
static void ixgbe_netpoll(struct net_device *netdev)
{
struct ixgbe_adapter *adapter = netdev_priv(netdev);
+ int i;
- disable_irq(adapter->pdev->irq);
adapter->flags |= IXGBE_FLAG_IN_NETPOLL;
- ixgbe_intr(adapter->pdev->irq, netdev);
+ if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) {
+ int num_q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
+ for (i = 0; i < num_q_vectors; i++) {
+ struct ixgbe_q_vector *q_vector = adapter->q_vector[i];
+ ixgbe_msix_clean_many(0, q_vector);
+ }
+ } else {
+ ixgbe_intr(adapter->pdev->irq, netdev);
+ }
adapter->flags &= ~IXGBE_FLAG_IN_NETPOLL;
- enable_irq(adapter->pdev->irq);
}
#endif
@@ -5611,7 +5618,7 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
if (pci_using_dac)
netdev->features |= NETIF_F_HIGHDMA;
- if (adapter->flags & IXGBE_FLAG2_RSC_ENABLED)
+ if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED)
netdev->features |= NETIF_F_LRO;
/* make sure the EEPROM is good */
diff --git a/drivers/net/ixgbe/ixgbe_type.h b/drivers/net/ixgbe/ixgbe_type.h
index fa87309dc08..be90eb4575f 100644
--- a/drivers/net/ixgbe/ixgbe_type.h
+++ b/drivers/net/ixgbe/ixgbe_type.h
@@ -718,6 +718,12 @@
#define IXGBE_ECC_STATUS_82599 0x110E0
#define IXGBE_BAR_CTRL_82599 0x110F4
+/* PCI Express Control */
+#define IXGBE_GCR_CMPL_TMOUT_MASK 0x0000F000
+#define IXGBE_GCR_CMPL_TMOUT_10ms 0x00001000
+#define IXGBE_GCR_CMPL_TMOUT_RESEND 0x00010000
+#define IXGBE_GCR_CAP_VER2 0x00040000
+
/* Time Sync Registers */
#define IXGBE_TSYNCRXCTL 0x05188 /* Rx Time Sync Control register - RW */
#define IXGBE_TSYNCTXCTL 0x08C00 /* Tx Time Sync Control register - RW */
@@ -1521,6 +1527,7 @@
/* PCI Bus Info */
#define IXGBE_PCI_LINK_STATUS 0xB2
+#define IXGBE_PCI_DEVICE_CONTROL2 0xC8
#define IXGBE_PCI_LINK_WIDTH 0x3F0
#define IXGBE_PCI_LINK_WIDTH_1 0x10
#define IXGBE_PCI_LINK_WIDTH_2 0x20
@@ -1531,6 +1538,7 @@
#define IXGBE_PCI_LINK_SPEED_5000 0x2
#define IXGBE_PCI_HEADER_TYPE_REGISTER 0x0E
#define IXGBE_PCI_HEADER_TYPE_MULTIFUNC 0x80
+#define IXGBE_PCI_DEVICE_CONTROL2_16ms 0x0005
/* Number of 100 microseconds we wait for PCI Express master disable */
#define IXGBE_PCI_MASTER_DISABLE_TIMEOUT 800
diff --git a/drivers/net/mlx4/en_tx.c b/drivers/net/mlx4/en_tx.c
index 08c43f2ae72..5a88b3f5769 100644
--- a/drivers/net/mlx4/en_tx.c
+++ b/drivers/net/mlx4/en_tx.c
@@ -249,6 +249,7 @@ static u32 mlx4_en_free_tx_desc(struct mlx4_en_priv *priv,
pci_unmap_page(mdev->pdev,
(dma_addr_t) be64_to_cpu(data->addr),
frag->size, PCI_DMA_TODEVICE);
+ ++data;
}
}
/* Stamp the freed descriptor */
diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index 637ac8b89ba..3cd8cfcf627 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -221,7 +221,7 @@ netxen_napi_disable(struct netxen_adapter *adapter)
}
}
-static int nx_set_dma_mask(struct netxen_adapter *adapter, uint8_t revision_id)
+static int nx_set_dma_mask(struct netxen_adapter *adapter)
{
struct pci_dev *pdev = adapter->pdev;
uint64_t mask, cmask;
@@ -229,19 +229,17 @@ static int nx_set_dma_mask(struct netxen_adapter *adapter, uint8_t revision_id)
adapter->pci_using_dac = 0;
mask = DMA_BIT_MASK(32);
- /*
- * Consistent DMA mask is set to 32 bit because it cannot be set to
- * 35 bits. For P3 also leave it at 32 bits for now. Only the rings
- * come off this pool.
- */
cmask = DMA_BIT_MASK(32);
+ if (NX_IS_REVISION_P2(adapter->ahw.revision_id)) {
#ifndef CONFIG_IA64
- if (revision_id >= NX_P3_B0)
- mask = DMA_BIT_MASK(39);
- else if (revision_id == NX_P2_C1)
mask = DMA_BIT_MASK(35);
#endif
+ } else {
+ mask = DMA_BIT_MASK(39);
+ cmask = mask;
+ }
+
if (pci_set_dma_mask(pdev, mask) == 0 &&
pci_set_consistent_dma_mask(pdev, cmask) == 0) {
adapter->pci_using_dac = 1;
@@ -256,7 +254,7 @@ static int
nx_update_dma_mask(struct netxen_adapter *adapter)
{
int change, shift, err;
- uint64_t mask, old_mask;
+ uint64_t mask, old_mask, old_cmask;
struct pci_dev *pdev = adapter->pdev;
change = 0;
@@ -272,14 +270,29 @@ nx_update_dma_mask(struct netxen_adapter *adapter)
if (change) {
old_mask = pdev->dma_mask;
+ old_cmask = pdev->dev.coherent_dma_mask;
+
mask = (1ULL<<(32+shift)) - 1;
err = pci_set_dma_mask(pdev, mask);
if (err)
- return pci_set_dma_mask(pdev, old_mask);
+ goto err_out;
+
+ if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) {
+
+ err = pci_set_consistent_dma_mask(pdev, mask);
+ if (err)
+ goto err_out;
+ }
+ dev_info(&pdev->dev, "using %d-bit dma mask\n", 32+shift);
}
return 0;
+
+err_out:
+ pci_set_dma_mask(pdev, old_mask);
+ pci_set_consistent_dma_mask(pdev, old_cmask);
+ return err;
}
static void netxen_check_options(struct netxen_adapter *adapter)
@@ -1006,7 +1019,7 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
revision_id = pdev->revision;
adapter->ahw.revision_id = revision_id;
- err = nx_set_dma_mask(adapter, revision_id);
+ err = nx_set_dma_mask(adapter);
if (err)
goto err_out_free_netdev;
diff --git a/drivers/net/pcnet32.c b/drivers/net/pcnet32.c
index 28368157dac..a646a445fda 100644
--- a/drivers/net/pcnet32.c
+++ b/drivers/net/pcnet32.c
@@ -1611,8 +1611,11 @@ pcnet32_probe1(unsigned long ioaddr, int shared, struct pci_dev *pdev)
if (pcnet32_dwio_read_csr(ioaddr, 0) == 4
&& pcnet32_dwio_check(ioaddr)) {
a = &pcnet32_dwio;
- } else
+ } else {
+ if (pcnet32_debug & NETIF_MSG_PROBE)
+ printk(KERN_ERR PFX "No access methods\n");
goto err_release_region;
+ }
}
chip_version =
@@ -1719,7 +1722,9 @@ pcnet32_probe1(unsigned long ioaddr, int shared, struct pci_dev *pdev)
ret = -ENOMEM;
goto err_release_region;
}
- SET_NETDEV_DEV(dev, &pdev->dev);
+
+ if (pdev)
+ SET_NETDEV_DEV(dev, &pdev->dev);
if (pcnet32_debug & NETIF_MSG_PROBE)
printk(KERN_INFO PFX "%s at %#3lx,", chipname, ioaddr);
@@ -1818,7 +1823,6 @@ pcnet32_probe1(unsigned long ioaddr, int shared, struct pci_dev *pdev)
spin_lock_init(&lp->lock);
- SET_NETDEV_DEV(dev, &pdev->dev);
lp->name = chipname;
lp->shared_irq = shared;
lp->tx_ring_size = TX_RING_SIZE; /* default tx ring size */
@@ -1852,12 +1856,6 @@ pcnet32_probe1(unsigned long ioaddr, int shared, struct pci_dev *pdev)
((cards_found >= MAX_UNITS) || full_duplex[cards_found]))
lp->options |= PCNET32_PORT_FD;
- if (!a) {
- if (pcnet32_debug & NETIF_MSG_PROBE)
- printk(KERN_ERR PFX "No access methods\n");
- ret = -ENODEV;
- goto err_free_consistent;
- }
lp->a = *a;
/* prior to register_netdev, dev->name is not yet correct */
@@ -1973,14 +1971,13 @@ pcnet32_probe1(unsigned long ioaddr, int shared, struct pci_dev *pdev)
return 0;
- err_free_ring:
+err_free_ring:
pcnet32_free_ring(dev);
- err_free_consistent:
pci_free_consistent(lp->pci_dev, sizeof(*lp->init_block),
lp->init_block, lp->init_dma_addr);
- err_free_netdev:
+err_free_netdev:
free_netdev(dev);
- err_release_region:
+err_release_region:
release_region(ioaddr, PCNET32_TOTAL_SIZE);
return ret;
}
@@ -2089,6 +2086,7 @@ static void pcnet32_free_ring(struct net_device *dev)
static int pcnet32_open(struct net_device *dev)
{
struct pcnet32_private *lp = netdev_priv(dev);
+ struct pci_dev *pdev = lp->pci_dev;
unsigned long ioaddr = dev->base_addr;
u16 val;
int i;
@@ -2149,9 +2147,9 @@ static int pcnet32_open(struct net_device *dev)
lp->a.write_csr(ioaddr, 124, val);
/* Allied Telesyn AT 2700/2701 FX are 100Mbit only and do not negotiate */
- if (lp->pci_dev->subsystem_vendor == PCI_VENDOR_ID_AT &&
- (lp->pci_dev->subsystem_device == PCI_SUBDEVICE_ID_AT_2700FX ||
- lp->pci_dev->subsystem_device == PCI_SUBDEVICE_ID_AT_2701FX)) {
+ if (pdev && pdev->subsystem_vendor == PCI_VENDOR_ID_AT &&
+ (pdev->subsystem_device == PCI_SUBDEVICE_ID_AT_2700FX ||
+ pdev->subsystem_device == PCI_SUBDEVICE_ID_AT_2701FX)) {
if (lp->options & PCNET32_PORT_ASEL) {
lp->options = PCNET32_PORT_FD | PCNET32_PORT_100;
if (netif_msg_link(lp))
diff --git a/drivers/net/ppp_generic.c b/drivers/net/ppp_generic.c
index 639d11bc444..cd37d739ac7 100644
--- a/drivers/net/ppp_generic.c
+++ b/drivers/net/ppp_generic.c
@@ -1384,7 +1384,7 @@ static int ppp_mp_explode(struct ppp *ppp, struct sk_buff *skb)
/* create a fragment for each channel */
bits = B;
- while (nfree > 0 && len > 0) {
+ while (len > 0) {
list = list->next;
if (list == &ppp->channels) {
i = 0;
@@ -1431,29 +1431,31 @@ static int ppp_mp_explode(struct ppp *ppp, struct sk_buff *skb)
*otherwise divide it according to the speed
*of the channel we are going to transmit on
*/
- if (pch->speed == 0) {
- flen = totlen/nfree ;
- if (nbigger > 0) {
- flen++;
- nbigger--;
- }
- } else {
- flen = (((totfree - nzero)*(totlen + hdrlen*totfree)) /
- ((totspeed*totfree)/pch->speed)) - hdrlen;
- if (nbigger > 0) {
- flen += ((totfree - nzero)*pch->speed)/totspeed;
- nbigger -= ((totfree - nzero)*pch->speed)/
+ if (nfree > 0) {
+ if (pch->speed == 0) {
+ flen = totlen/nfree ;
+ if (nbigger > 0) {
+ flen++;
+ nbigger--;
+ }
+ } else {
+ flen = (((totfree - nzero)*(totlen + hdrlen*totfree)) /
+ ((totspeed*totfree)/pch->speed)) - hdrlen;
+ if (nbigger > 0) {
+ flen += ((totfree - nzero)*pch->speed)/totspeed;
+ nbigger -= ((totfree - nzero)*pch->speed)/
totspeed;
+ }
}
+ nfree--;
}
- nfree--;
/*
*check if we are on the last channel or
*we exceded the lenght of the data to
*fragment
*/
- if ((nfree == 0) || (flen > len))
+ if ((nfree <= 0) || (flen > len))
flen = len;
/*
*it is not worth to tx on slow channels:
@@ -1467,7 +1469,7 @@ static int ppp_mp_explode(struct ppp *ppp, struct sk_buff *skb)
continue;
}
- mtu = pch->chan->mtu + 2 - hdrlen;
+ mtu = pch->chan->mtu - hdrlen;
if (mtu < 4)
mtu = 4;
if (flen > mtu)
diff --git a/drivers/net/pppoe.c b/drivers/net/pppoe.c
index f0031f1f97e..5f2090233d7 100644
--- a/drivers/net/pppoe.c
+++ b/drivers/net/pppoe.c
@@ -1063,6 +1063,7 @@ static void *pppoe_seq_next(struct seq_file *seq, void *v, loff_t *pos)
else {
int hash = hash_item(po->pppoe_pa.sid, po->pppoe_pa.remote);
+ po = NULL;
while (++hash < PPPOE_HASH_SIZE) {
po = pn->hash_table[hash];
if (po)
diff --git a/drivers/net/pppol2tp.c b/drivers/net/pppol2tp.c
index e7935d09c89..e0f9219a0ae 100644
--- a/drivers/net/pppol2tp.c
+++ b/drivers/net/pppol2tp.c
@@ -2680,6 +2680,7 @@ out_unregister_pppol2tp_proto:
static void __exit pppol2tp_exit(void)
{
unregister_pppox_proto(PX_PROTO_OL2TP);
+ unregister_pernet_gen_device(pppol2tp_net_id, &pppol2tp_net_ops);
proto_unregister(&pppol2tp_sk_proto);
}
diff --git a/drivers/net/s6gmac.c b/drivers/net/s6gmac.c
index 5345e47b35a..4525cbe8dd6 100644
--- a/drivers/net/s6gmac.c
+++ b/drivers/net/s6gmac.c
@@ -793,7 +793,7 @@ static inline int s6gmac_phy_start(struct net_device *dev)
struct s6gmac *pd = netdev_priv(dev);
int i = 0;
struct phy_device *p = NULL;
- while ((!(p = pd->mii.bus->phy_map[i])) && (i < PHY_MAX_ADDR))
+ while ((i < PHY_MAX_ADDR) && (!(p = pd->mii.bus->phy_map[i])))
i++;
p = phy_connect(dev, dev_name(&p->dev), &s6gmac_adjust_link, 0,
PHY_INTERFACE_MODE_RGMII);
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 3550c5dcd93..0a551d8f5d9 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -1488,6 +1488,8 @@ static int sky2_up(struct net_device *dev)
sky2_set_vlan_mode(hw, port, sky2->vlgrp != NULL);
#endif
+ sky2->restarting = 0;
+
err = sky2_rx_start(sky2);
if (err)
goto err_out;
@@ -1500,6 +1502,9 @@ static int sky2_up(struct net_device *dev)
sky2_set_multicast(dev);
+ /* wake queue incase we are restarting */
+ netif_wake_queue(dev);
+
if (netif_msg_ifup(sky2))
printk(KERN_INFO PFX "%s: enabling interface\n", dev->name);
return 0;
@@ -1533,6 +1538,8 @@ static inline int tx_dist(unsigned tail, unsigned head)
/* Number of list elements available for next tx */
static inline int tx_avail(const struct sky2_port *sky2)
{
+ if (unlikely(sky2->restarting))
+ return 0;
return sky2->tx_pending - tx_dist(sky2->tx_cons, sky2->tx_prod);
}
@@ -1818,6 +1825,10 @@ static int sky2_down(struct net_device *dev)
if (netif_msg_ifdown(sky2))
printk(KERN_INFO PFX "%s: disabling interface\n", dev->name);
+ /* explicitly shut off tx incase we're restarting */
+ sky2->restarting = 1;
+ netif_tx_disable(dev);
+
/* Force flow control off */
sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_OFF);
@@ -2359,7 +2370,7 @@ static inline void sky2_tx_done(struct net_device *dev, u16 last)
{
struct sky2_port *sky2 = netdev_priv(dev);
- if (netif_running(dev)) {
+ if (likely(netif_running(dev) && !sky2->restarting)) {
netif_tx_lock(dev);
sky2_tx_complete(sky2, last);
netif_tx_unlock(dev);
@@ -4283,6 +4294,7 @@ static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw,
spin_lock_init(&sky2->phy_lock);
sky2->tx_pending = TX_DEF_PENDING;
sky2->rx_pending = RX_DEF_PENDING;
+ sky2->restarting = 0;
hw->dev[port] = dev;
diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h
index b5549c9e510..4486b066b43 100644
--- a/drivers/net/sky2.h
+++ b/drivers/net/sky2.h
@@ -2051,6 +2051,7 @@ struct sky2_port {
u8 duplex; /* DUPLEX_HALF, DUPLEX_FULL */
u8 rx_csum;
u8 wol;
+ u8 restarting;
enum flow_control flow_mode;
enum flow_control flow_status;
diff --git a/drivers/net/tulip/de4x5.c b/drivers/net/tulip/de4x5.c
index eb72d2e9ab3..acfdccd4456 100644
--- a/drivers/net/tulip/de4x5.c
+++ b/drivers/net/tulip/de4x5.c
@@ -5059,7 +5059,7 @@ mii_get_phy(struct net_device *dev)
if ((id == 0) || (id == 65535)) continue; /* Valid ID? */
for (j=0; j<limit; j++) { /* Search PHY table */
if (id != phy_info[j].id) continue; /* ID match? */
- for (k=0; lp->phy[k].id && (k < DE4X5_MAX_PHY); k++);
+ for (k=0; k < DE4X5_MAX_PHY && lp->phy[k].id; k++);
if (k < DE4X5_MAX_PHY) {
memcpy((char *)&lp->phy[k],
(char *)&phy_info[j], sizeof(struct phy_table));
@@ -5072,7 +5072,7 @@ mii_get_phy(struct net_device *dev)
break;
}
if ((j == limit) && (i < DE4X5_MAX_MII)) {
- for (k=0; lp->phy[k].id && (k < DE4X5_MAX_PHY); k++);
+ for (k=0; k < DE4X5_MAX_PHY && lp->phy[k].id; k++);
lp->phy[k].addr = i;
lp->phy[k].id = id;
lp->phy[k].spd.reg = GENERIC_REG; /* ANLPA register */
@@ -5091,7 +5091,7 @@ mii_get_phy(struct net_device *dev)
purgatory:
lp->active = 0;
if (lp->phy[0].id) { /* Reset the PHY devices */
- for (k=0; lp->phy[k].id && (k < DE4X5_MAX_PHY); k++) { /*For each PHY*/
+ for (k=0; k < DE4X5_MAX_PHY && lp->phy[k].id; k++) { /*For each PHY*/
mii_wr(MII_CR_RST, MII_CR, lp->phy[k].addr, DE4X5_MII);
while (mii_rd(MII_CR, lp->phy[k].addr, DE4X5_MII) & MII_CR_RST);
diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c
index c70604f0329..8ce5e4cee16 100644
--- a/drivers/net/wireless/airo.c
+++ b/drivers/net/wireless/airo.c
@@ -5918,20 +5918,19 @@ static int airo_set_essid(struct net_device *dev,
readSsidRid(local, &SSID_rid);
/* Check if we asked for `any' */
- if(dwrq->flags == 0) {
+ if (dwrq->flags == 0) {
/* Just send an empty SSID list */
memset(&SSID_rid, 0, sizeof(SSID_rid));
} else {
- int index = (dwrq->flags & IW_ENCODE_INDEX) - 1;
+ unsigned index = (dwrq->flags & IW_ENCODE_INDEX) - 1;
/* Check the size of the string */
- if(dwrq->length > IW_ESSID_MAX_SIZE) {
+ if (dwrq->length > IW_ESSID_MAX_SIZE)
return -E2BIG ;
- }
+
/* Check if index is valid */
- if((index < 0) || (index >= 4)) {
+ if (index >= ARRAY_SIZE(SSID_rid.ssids))
return -EINVAL;
- }
/* Set the SSID */
memset(SSID_rid.ssids[index].ssid, 0,
@@ -6819,7 +6818,7 @@ static int airo_set_txpow(struct net_device *dev,
return -EINVAL;
}
clear_bit (FLAG_RADIO_OFF, &local->flags);
- for (i = 0; cap_rid.txPowerLevels[i] && (i < 8); i++)
+ for (i = 0; i < 8 && cap_rid.txPowerLevels[i]; i++)
if (v == cap_rid.txPowerLevels[i]) {
readConfigRid(local, 1);
local->config.txPower = v;
diff --git a/drivers/net/wireless/ath/ath9k/eeprom.c b/drivers/net/wireless/ath/ath9k/eeprom.c
index a2fda702b62..ce0e86c36a8 100644
--- a/drivers/net/wireless/ath/ath9k/eeprom.c
+++ b/drivers/net/wireless/ath/ath9k/eeprom.c
@@ -460,7 +460,7 @@ static int ath9k_hw_4k_check_eeprom(struct ath_hw *ah)
integer = swab32(eep->modalHeader.antCtrlCommon);
eep->modalHeader.antCtrlCommon = integer;
- for (i = 0; i < AR5416_MAX_CHAINS; i++) {
+ for (i = 0; i < AR5416_EEP4K_MAX_CHAINS; i++) {
integer = swab32(eep->modalHeader.antCtrlChain[i]);
eep->modalHeader.antCtrlChain[i] = integer;
}
@@ -914,7 +914,7 @@ static void ath9k_hw_set_4k_power_per_rate_table(struct ath_hw *ah,
ctlMode, numCtlModes, isHt40CtlMode,
(pCtlMode[ctlMode] & EXT_ADDITIVE));
- for (i = 0; (i < AR5416_NUM_CTLS) &&
+ for (i = 0; (i < AR5416_EEP4K_NUM_CTLS) &&
pEepData->ctlIndex[i]; i++) {
DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
" LOOP-Ctlidx %d: cfgCtl 0x%2.2x "
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.h b/drivers/net/wireless/iwlwifi/iwl-3945.h
index fbb3a573463..2de6471d4be 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945.h
+++ b/drivers/net/wireless/iwlwifi/iwl-3945.h
@@ -112,7 +112,7 @@ enum iwl3945_antenna {
#define IWL_TX_FIFO_NONE 7
/* Minimum number of queues. MAX_NUM is defined in hw specific files */
-#define IWL_MIN_NUM_QUEUES 4
+#define IWL39_MIN_NUM_QUEUES 4
#define IEEE80211_DATA_LEN 2304
#define IEEE80211_4ADDR_LEN 30
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index 6ab07165ea2..18b135f510e 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -1332,6 +1332,9 @@ int iwl_setup_mac(struct iwl_priv *priv)
hw->wiphy->custom_regulatory = true;
+ /* Firmware does not support this */
+ hw->wiphy->disable_beacon_hints = true;
+
hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX;
/* we create the 802.11 header and a zero-length SSID element */
hw->wiphy->max_scan_ie_len = IWL_MAX_PROBE_REQUEST - 24 - 2;
diff --git a/drivers/net/wireless/iwlwifi/iwl-debugfs.c b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
index 11e08c06891..ca00cc8ad4c 100644
--- a/drivers/net/wireless/iwlwifi/iwl-debugfs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
@@ -308,18 +308,18 @@ static ssize_t iwl_dbgfs_nvm_read(struct file *file,
return -ENODATA;
}
+ ptr = priv->eeprom;
+ if (!ptr) {
+ IWL_ERR(priv, "Invalid EEPROM/OTP memory\n");
+ return -ENOMEM;
+ }
+
/* 4 characters for byte 0xYY */
buf = kzalloc(buf_size, GFP_KERNEL);
if (!buf) {
IWL_ERR(priv, "Can not allocate Buffer\n");
return -ENOMEM;
}
-
- ptr = priv->eeprom;
- if (!ptr) {
- IWL_ERR(priv, "Invalid EEPROM/OTP memory\n");
- return -ENOMEM;
- }
pos += scnprintf(buf + pos, buf_size - pos, "NVM Type: %s\n",
(priv->nvm_device_type == NVM_DEVICE_TYPE_OTP)
? "OTP" : "EEPROM");
diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h
index e2d620f0b6e..650e20af20f 100644
--- a/drivers/net/wireless/iwlwifi/iwl-dev.h
+++ b/drivers/net/wireless/iwlwifi/iwl-dev.h
@@ -258,8 +258,10 @@ struct iwl_channel_info {
#define IWL_TX_FIFO_HCCA_2 6
#define IWL_TX_FIFO_NONE 7
-/* Minimum number of queues. MAX_NUM is defined in hw specific files */
-#define IWL_MIN_NUM_QUEUES 4
+/* Minimum number of queues. MAX_NUM is defined in hw specific files.
+ * Set the minimum to accommodate the 4 standard TX queues, 1 command
+ * queue, 2 (unused) HCCA queues, and 4 HT queues (one for each AC) */
+#define IWL_MIN_NUM_QUEUES 10
/* Power management (not Tx power) structures */
diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c
index 2addf735b19..ffd5c61a755 100644
--- a/drivers/net/wireless/iwlwifi/iwl-sta.c
+++ b/drivers/net/wireless/iwlwifi/iwl-sta.c
@@ -566,6 +566,8 @@ int iwl_remove_default_wep_key(struct iwl_priv *priv,
unsigned long flags;
spin_lock_irqsave(&priv->sta_lock, flags);
+ IWL_DEBUG_WEP(priv, "Removing default WEP key: idx=%d\n",
+ keyconf->keyidx);
if (!test_and_clear_bit(keyconf->keyidx, &priv->ucode_key_table))
IWL_ERR(priv, "index %d not used in uCode key table.\n",
@@ -573,6 +575,11 @@ int iwl_remove_default_wep_key(struct iwl_priv *priv,
priv->default_wep_key--;
memset(&priv->wep_keys[keyconf->keyidx], 0, sizeof(priv->wep_keys[0]));
+ if (iwl_is_rfkill(priv)) {
+ IWL_DEBUG_WEP(priv, "Not sending REPLY_WEPKEY command due to RFKILL.\n");
+ spin_unlock_irqrestore(&priv->sta_lock, flags);
+ return 0;
+ }
ret = iwl_send_static_wepkey_cmd(priv, 1);
IWL_DEBUG_WEP(priv, "Remove default WEP key: idx=%d ret=%d\n",
keyconf->keyidx, ret);
@@ -853,6 +860,11 @@ int iwl_remove_dynamic_key(struct iwl_priv *priv,
priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK;
priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
+ if (iwl_is_rfkill(priv)) {
+ IWL_DEBUG_WEP(priv, "Not sending REPLY_ADD_STA command because RFKILL enabled. \n");
+ spin_unlock_irqrestore(&priv->sta_lock, flags);
+ return 0;
+ }
ret = iwl_send_add_sta(priv, &priv->stations[sta_id].sta, CMD_ASYNC);
spin_unlock_irqrestore(&priv->sta_lock, flags);
return ret;
diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c
index 9bbeec9427f..2e89040e63b 100644
--- a/drivers/net/wireless/iwlwifi/iwl-tx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-tx.c
@@ -720,8 +720,6 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
goto drop_unlock;
}
- spin_unlock_irqrestore(&priv->lock, flags);
-
hdr_len = ieee80211_hdrlen(fc);
/* Find (or create) index into station table for destination station */
@@ -729,7 +727,7 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
if (sta_id == IWL_INVALID_STATION) {
IWL_DEBUG_DROP(priv, "Dropping - INVALID STATION: %pM\n",
hdr->addr1);
- goto drop;
+ goto drop_unlock;
}
IWL_DEBUG_TX(priv, "station Id %d\n", sta_id);
@@ -750,14 +748,17 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
txq_id = priv->stations[sta_id].tid[tid].agg.txq_id;
swq_id = iwl_virtual_agg_queue_num(swq_id, txq_id);
}
- priv->stations[sta_id].tid[tid].tfds_in_queue++;
}
txq = &priv->txq[txq_id];
q = &txq->q;
txq->swq_id = swq_id;
- spin_lock_irqsave(&priv->lock, flags);
+ if (unlikely(iwl_queue_space(q) < q->high_mark))
+ goto drop_unlock;
+
+ if (ieee80211_is_data_qos(fc))
+ priv->stations[sta_id].tid[tid].tfds_in_queue++;
/* Set up driver data for this TFD */
memset(&(txq->txb[q->write_ptr]), 0, sizeof(struct iwl_tx_info));
@@ -902,7 +903,6 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
drop_unlock:
spin_unlock_irqrestore(&priv->lock, flags);
-drop:
return -1;
}
EXPORT_SYMBOL(iwl_tx_skb);
@@ -1171,6 +1171,8 @@ int iwl_tx_agg_start(struct iwl_priv *priv, const u8 *ra, u16 tid, u16 *ssn)
IWL_ERR(priv, "Start AGG on invalid station\n");
return -ENXIO;
}
+ if (unlikely(tid >= MAX_TID_COUNT))
+ return -EINVAL;
if (priv->stations[sta_id].tid[tid].agg.state != IWL_AGG_OFF) {
IWL_ERR(priv, "Start AGG when state is not IWL_AGG_OFF !\n");
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index 956798f2c80..523843369ca 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -3968,6 +3968,9 @@ static int iwl3945_setup_mac(struct iwl_priv *priv)
hw->wiphy->custom_regulatory = true;
+ /* Firmware does not support this */
+ hw->wiphy->disable_beacon_hints = true;
+
hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX_3945;
/* we create the 802.11 header and a zero-length SSID element */
hw->wiphy->max_scan_ie_len = IWL_MAX_PROBE_REQUEST - 24 - 2;
@@ -4018,10 +4021,10 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e
SET_IEEE80211_DEV(hw, &pdev->dev);
if ((iwl3945_mod_params.num_of_queues > IWL39_MAX_NUM_QUEUES) ||
- (iwl3945_mod_params.num_of_queues < IWL_MIN_NUM_QUEUES)) {
+ (iwl3945_mod_params.num_of_queues < IWL39_MIN_NUM_QUEUES)) {
IWL_ERR(priv,
"invalid queues_num, should be between %d and %d\n",
- IWL_MIN_NUM_QUEUES, IWL39_MAX_NUM_QUEUES);
+ IWL39_MIN_NUM_QUEUES, IWL39_MAX_NUM_QUEUES);
err = -EINVAL;
goto out_ieee80211_free_hw;
}
diff --git a/drivers/net/wireless/iwmc3200wifi/commands.c b/drivers/net/wireless/iwmc3200wifi/commands.c
index 834a7f544e5..e2334d12359 100644
--- a/drivers/net/wireless/iwmc3200wifi/commands.c
+++ b/drivers/net/wireless/iwmc3200wifi/commands.c
@@ -220,6 +220,7 @@ int iwm_store_rxiq_calib_result(struct iwm_priv *iwm)
eeprom_rxiq = iwm_eeprom_access(iwm, IWM_EEPROM_CALIB_RXIQ);
if (IS_ERR(eeprom_rxiq)) {
IWM_ERR(iwm, "Couldn't access EEPROM RX IQ entry\n");
+ kfree(rxiq);
return PTR_ERR(eeprom_rxiq);
}
diff --git a/drivers/net/wireless/iwmc3200wifi/netdev.c b/drivers/net/wireless/iwmc3200wifi/netdev.c
index aea5ccf24cc..bf294e41753 100644
--- a/drivers/net/wireless/iwmc3200wifi/netdev.c
+++ b/drivers/net/wireless/iwmc3200wifi/netdev.c
@@ -106,10 +106,8 @@ void *iwm_if_alloc(int sizeof_bus, struct device *dev,
int ret = 0;
wdev = iwm_wdev_alloc(sizeof_bus, dev);
- if (!wdev) {
- dev_err(dev, "no memory for wireless device instance\n");
- return ERR_PTR(-ENOMEM);
- }
+ if (IS_ERR(wdev))
+ return wdev;
iwm = wdev_to_iwm(wdev);
iwm->bus_ops = if_ops;
diff --git a/drivers/net/wireless/libertas/11d.c b/drivers/net/wireless/libertas/11d.c
index 9a5408e7d94..5c6968101f0 100644
--- a/drivers/net/wireless/libertas/11d.c
+++ b/drivers/net/wireless/libertas/11d.c
@@ -47,7 +47,7 @@ static u8 lbs_region_2_code(u8 *region)
{
u8 i;
- for (i = 0; region[i] && i < COUNTRY_CODE_LEN; i++)
+ for (i = 0; i < COUNTRY_CODE_LEN && region[i]; i++)
region[i] = toupper(region[i]);
for (i = 0; i < ARRAY_SIZE(region_code_mapping); i++) {
diff --git a/drivers/net/wireless/libertas/assoc.c b/drivers/net/wireless/libertas/assoc.c
index b9b37411903..d6997371c27 100644
--- a/drivers/net/wireless/libertas/assoc.c
+++ b/drivers/net/wireless/libertas/assoc.c
@@ -1,6 +1,7 @@
/* Copyright (C) 2006, Red Hat, Inc. */
#include <linux/types.h>
+#include <linux/kernel.h>
#include <linux/etherdevice.h>
#include <linux/ieee80211.h>
#include <linux/if_arp.h>
@@ -43,21 +44,21 @@ static int get_common_rates(struct lbs_private *priv,
u16 *rates_size)
{
u8 *card_rates = lbs_bg_rates;
- size_t num_card_rates = sizeof(lbs_bg_rates);
int ret = 0, i, j;
- u8 tmp[30];
+ u8 tmp[(ARRAY_SIZE(lbs_bg_rates) - 1) * (*rates_size - 1)];
size_t tmp_size = 0;
/* For each rate in card_rates that exists in rate1, copy to tmp */
- for (i = 0; card_rates[i] && (i < num_card_rates); i++) {
- for (j = 0; rates[j] && (j < *rates_size); j++) {
+ for (i = 0; i < ARRAY_SIZE(lbs_bg_rates) && card_rates[i]; i++) {
+ for (j = 0; j < *rates_size && rates[j]; j++) {
if (rates[j] == card_rates[i])
tmp[tmp_size++] = card_rates[i];
}
}
lbs_deb_hex(LBS_DEB_JOIN, "AP rates ", rates, *rates_size);
- lbs_deb_hex(LBS_DEB_JOIN, "card rates ", card_rates, num_card_rates);
+ lbs_deb_hex(LBS_DEB_JOIN, "card rates ", card_rates,
+ ARRAY_SIZE(lbs_bg_rates));
lbs_deb_hex(LBS_DEB_JOIN, "common rates", tmp, tmp_size);
lbs_deb_join("TX data rate 0x%02x\n", priv->cur_rate);
@@ -69,10 +70,7 @@ static int get_common_rates(struct lbs_private *priv,
lbs_pr_alert("Previously set fixed data rate %#x isn't "
"compatible with the network.\n", priv->cur_rate);
ret = -1;
- goto done;
}
- ret = 0;
-
done:
memset(rates, 0, *rates_size);
*rates_size = min_t(int, tmp_size, *rates_size);
@@ -322,7 +320,7 @@ static int lbs_associate(struct lbs_private *priv,
rates = (struct mrvl_ie_rates_param_set *) pos;
rates->header.type = cpu_to_le16(TLV_TYPE_RATES);
memcpy(&rates->rates, &bss->rates, MAX_RATES);
- tmplen = MAX_RATES;
+ tmplen = min_t(u16, ARRAY_SIZE(rates->rates), MAX_RATES);
if (get_common_rates(priv, rates->rates, &tmplen)) {
ret = -1;
goto done;
@@ -598,7 +596,7 @@ static int lbs_adhoc_join(struct lbs_private *priv,
/* Copy Data rates from the rates recorded in scan response */
memset(cmd.bss.rates, 0, sizeof(cmd.bss.rates));
- ratesize = min_t(u16, sizeof(cmd.bss.rates), MAX_RATES);
+ ratesize = min_t(u16, ARRAY_SIZE(cmd.bss.rates), MAX_RATES);
memcpy(cmd.bss.rates, bss->rates, ratesize);
if (get_common_rates(priv, cmd.bss.rates, &ratesize)) {
lbs_deb_join("ADHOC_JOIN: get_common_rates returned error.\n");
diff --git a/drivers/net/wireless/libertas/scan.c b/drivers/net/wireless/libertas/scan.c
index 601b5424967..6c95af3023c 100644
--- a/drivers/net/wireless/libertas/scan.c
+++ b/drivers/net/wireless/libertas/scan.c
@@ -5,6 +5,7 @@
* for sending scan commands to the firmware.
*/
#include <linux/types.h>
+#include <linux/kernel.h>
#include <linux/etherdevice.h>
#include <linux/if_arp.h>
#include <asm/unaligned.h>
@@ -876,7 +877,7 @@ static inline char *lbs_translate_scan(struct lbs_private *priv,
iwe.u.bitrate.disabled = 0;
iwe.u.bitrate.value = 0;
- for (j = 0; bss->rates[j] && (j < sizeof(bss->rates)); j++) {
+ for (j = 0; j < ARRAY_SIZE(bss->rates) && bss->rates[j]; j++) {
/* Bit rate given in 500 kb/s units */
iwe.u.bitrate.value = bss->rates[j] * 500000;
current_val = iwe_stream_add_value(info, start, current_val,
diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c
index 40b07b98822..3bd3c779fff 100644
--- a/drivers/net/wireless/zd1211rw/zd_mac.c
+++ b/drivers/net/wireless/zd1211rw/zd_mac.c
@@ -698,7 +698,7 @@ int zd_mac_rx(struct ieee80211_hw *hw, const u8 *buffer, unsigned int length)
&& !mac->pass_ctrl)
return 0;
- fc = *(__le16 *)buffer;
+ fc = get_unaligned((__le16*)buffer);
need_padding = ieee80211_is_data_qos(fc) ^ ieee80211_has_a4(fc);
skb = dev_alloc_skb(length + (need_padding ? 2 : 0));
diff --git a/drivers/parisc/ccio-dma.c b/drivers/parisc/ccio-dma.c
index 0f0e0b919ef..a45b0c0d574 100644
--- a/drivers/parisc/ccio-dma.c
+++ b/drivers/parisc/ccio-dma.c
@@ -70,7 +70,6 @@
#undef CCIO_COLLECT_STATS
#endif
-#include <linux/proc_fs.h>
#include <asm/runway.h> /* for proc_runway_root */
#ifdef DEBUG_CCIO_INIT
diff --git a/drivers/parisc/dino.c b/drivers/parisc/dino.c
index c590974e981..d69bde6a234 100644
--- a/drivers/parisc/dino.c
+++ b/drivers/parisc/dino.c
@@ -614,7 +614,7 @@ dino_fixup_bus(struct pci_bus *bus)
dev_name(&bus->self->dev), i,
bus->self->resource[i].start,
bus->self->resource[i].end);
- pci_assign_resource(bus->self, i);
+ WARN_ON(pci_assign_resource(bus->self, i));
DBG("DEBUG %s after assign %d [0x%lx,0x%lx]\n",
dev_name(&bus->self->dev), i,
bus->self->resource[i].start,
diff --git a/drivers/parisc/eisa_eeprom.c b/drivers/parisc/eisa_eeprom.c
index 685d94e69d4..8c0b26e9b98 100644
--- a/drivers/parisc/eisa_eeprom.c
+++ b/drivers/parisc/eisa_eeprom.c
@@ -55,7 +55,7 @@ static ssize_t eisa_eeprom_read(struct file * file,
ssize_t ret;
int i;
- if (*ppos >= HPEE_MAX_LENGTH)
+ if (*ppos < 0 || *ppos >= HPEE_MAX_LENGTH)
return 0;
count = *ppos + count < HPEE_MAX_LENGTH ? count : HPEE_MAX_LENGTH - *ppos;
diff --git a/drivers/parisc/hppb.c b/drivers/parisc/hppb.c
index 13856415b43..815db175d42 100644
--- a/drivers/parisc/hppb.c
+++ b/drivers/parisc/hppb.c
@@ -62,7 +62,8 @@ static int hppb_probe(struct parisc_device *dev)
}
card = card->next;
}
- printk(KERN_INFO "Found GeckoBoa at 0x%x\n", dev->hpa.start);
+ printk(KERN_INFO "Found GeckoBoa at 0x%llx\n",
+ (unsigned long long) dev->hpa.start);
card->hpa = dev->hpa.start;
card->mmio_region.name = "HP-PB Bus";
@@ -73,8 +74,10 @@ static int hppb_probe(struct parisc_device *dev)
status = ccio_request_resource(dev, &card->mmio_region);
if(status < 0) {
- printk(KERN_ERR "%s: failed to claim HP-PB bus space (%08x, %08x)\n",
- __FILE__, card->mmio_region.start, card->mmio_region.end);
+ printk(KERN_ERR "%s: failed to claim HP-PB "
+ "bus space (0x%08llx, 0x%08llx)\n",
+ __FILE__, (unsigned long long) card->mmio_region.start,
+ (unsigned long long) card->mmio_region.end);
}
return 0;
diff --git a/drivers/parisc/lba_pci.c b/drivers/parisc/lba_pci.c
index ede614616f8..3aeb3279c92 100644
--- a/drivers/parisc/lba_pci.c
+++ b/drivers/parisc/lba_pci.c
@@ -992,7 +992,7 @@ lba_pat_resources(struct parisc_device *pa_dev, struct lba_device *lba_dev)
return;
io_pdc_cell = kzalloc(sizeof(pdc_pat_cell_mod_maddr_block_t), GFP_KERNEL);
- if (!pa_pdc_cell) {
+ if (!io_pdc_cell) {
kfree(pa_pdc_cell);
return;
}
diff --git a/drivers/parisc/pdc_stable.c b/drivers/parisc/pdc_stable.c
index f9f9a5f1bbd..13a64bc081b 100644
--- a/drivers/parisc/pdc_stable.c
+++ b/drivers/parisc/pdc_stable.c
@@ -370,7 +370,7 @@ pdcspath_layer_read(struct pdcspath_entry *entry, char *buf)
if (!i) /* entry is not ready */
return -ENODATA;
- for (i = 0; devpath->layers[i] && (likely(i < 6)); i++)
+ for (i = 0; i < 6 && devpath->layers[i]; i++)
out += sprintf(out, "%u ", devpath->layers[i]);
out += sprintf(out, "\n");
diff --git a/drivers/pci/hotplug/sgi_hotplug.c b/drivers/pci/hotplug/sgi_hotplug.c
index a4494d78e7c..8aebe1e9d3d 100644
--- a/drivers/pci/hotplug/sgi_hotplug.c
+++ b/drivers/pci/hotplug/sgi_hotplug.c
@@ -90,11 +90,10 @@ static struct hotplug_slot_ops sn_hotplug_slot_ops = {
static DEFINE_MUTEX(sn_hotplug_mutex);
-static ssize_t path_show (struct hotplug_slot *bss_hotplug_slot,
- char *buf)
+static ssize_t path_show(struct pci_slot *pci_slot, char *buf)
{
int retval = -ENOENT;
- struct slot *slot = bss_hotplug_slot->private;
+ struct slot *slot = pci_slot->hotplug->private;
if (!slot)
return retval;
@@ -103,7 +102,7 @@ static ssize_t path_show (struct hotplug_slot *bss_hotplug_slot,
return retval;
}
-static struct hotplug_slot_attribute sn_slot_path_attr = __ATTR_RO(path);
+static struct pci_slot_attribute sn_slot_path_attr = __ATTR_RO(path);
static int sn_pci_slot_valid(struct pci_bus *pci_bus, int device)
{
diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c
index ebc9b8dca88..2314ad7ee5f 100644
--- a/drivers/pci/intel-iommu.c
+++ b/drivers/pci/intel-iommu.c
@@ -1505,7 +1505,6 @@ static int domain_context_mapping_one(struct dmar_domain *domain, int segment,
}
set_bit(num, iommu->domain_ids);
- set_bit(iommu->seq_id, &domain->iommu_bmp);
iommu->domains[num] = domain;
id = num;
}
@@ -1648,6 +1647,14 @@ static int domain_context_mapped(struct pci_dev *pdev)
tmp->devfn);
}
+/* Returns a number of VTD pages, but aligned to MM page size */
+static inline unsigned long aligned_nrpages(unsigned long host_addr,
+ size_t size)
+{
+ host_addr &= ~PAGE_MASK;
+ return PAGE_ALIGN(host_addr + size) >> VTD_PAGE_SHIFT;
+}
+
static int __domain_mapping(struct dmar_domain *domain, unsigned long iov_pfn,
struct scatterlist *sg, unsigned long phys_pfn,
unsigned long nr_pages, int prot)
@@ -1675,7 +1682,7 @@ static int __domain_mapping(struct dmar_domain *domain, unsigned long iov_pfn,
uint64_t tmp;
if (!sg_res) {
- sg_res = (sg->offset + sg->length + VTD_PAGE_SIZE - 1) >> VTD_PAGE_SHIFT;
+ sg_res = aligned_nrpages(sg->offset, sg->length);
sg->dma_address = ((dma_addr_t)iov_pfn << VTD_PAGE_SHIFT) + sg->offset;
sg->dma_length = sg->length;
pteval = page_to_phys(sg_page(sg)) | prot;
@@ -2415,14 +2422,6 @@ error:
return ret;
}
-/* Returns a number of VTD pages, but aligned to MM page size */
-static inline unsigned long aligned_nrpages(unsigned long host_addr,
- size_t size)
-{
- host_addr &= ~PAGE_MASK;
- return PAGE_ALIGN(host_addr + size) >> VTD_PAGE_SHIFT;
-}
-
/* This takes a number of _MM_ pages, not VTD pages */
static struct iova *intel_alloc_iova(struct device *dev,
struct dmar_domain *domain,
@@ -2551,6 +2550,7 @@ static dma_addr_t __intel_map_single(struct device *hwdev, phys_addr_t paddr,
int prot = 0;
int ret;
struct intel_iommu *iommu;
+ unsigned long paddr_pfn = paddr >> PAGE_SHIFT;
BUG_ON(dir == DMA_NONE);
@@ -2585,7 +2585,7 @@ static dma_addr_t __intel_map_single(struct device *hwdev, phys_addr_t paddr,
* is not a big problem
*/
ret = domain_pfn_mapping(domain, mm_to_dma_pfn(iova->pfn_lo),
- paddr >> VTD_PAGE_SHIFT, size, prot);
+ mm_to_dma_pfn(paddr_pfn), size, prot);
if (ret)
goto error;
@@ -2875,7 +2875,7 @@ static int intel_map_sg(struct device *hwdev, struct scatterlist *sglist, int ne
start_vpfn = mm_to_dma_pfn(iova->pfn_lo);
- ret = domain_sg_mapping(domain, start_vpfn, sglist, mm_to_dma_pfn(size), prot);
+ ret = domain_sg_mapping(domain, start_vpfn, sglist, size, prot);
if (unlikely(ret)) {
/* clear the page */
dma_pte_clear_range(domain, start_vpfn,
@@ -3408,6 +3408,7 @@ static int md_domain_init(struct dmar_domain *domain, int guest_width)
domain->iommu_count = 0;
domain->iommu_coherency = 0;
+ domain->iommu_snooping = 0;
domain->max_addr = 0;
/* always allocate the top pgd */
diff --git a/drivers/pci/setup-res.c b/drivers/pci/setup-res.c
index b711fb7181e..1898c7b4790 100644
--- a/drivers/pci/setup-res.c
+++ b/drivers/pci/setup-res.c
@@ -100,16 +100,16 @@ int pci_claim_resource(struct pci_dev *dev, int resource)
{
struct resource *res = &dev->resource[resource];
struct resource *root;
- char *dtype = resource < PCI_BRIDGE_RESOURCES ? "device" : "bridge";
int err;
root = pci_find_parent_resource(dev, res);
err = -EINVAL;
if (root != NULL)
- err = insert_resource(root, res);
+ err = request_resource(root, res);
if (err) {
+ const char *dtype = resource < PCI_BRIDGE_RESOURCES ? "device" : "bridge";
dev_err(&dev->dev, "BAR %d: %s of %s %pR\n",
resource,
root ? "address space collision on" :
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index 46dad12f952..77c6097ced8 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -277,31 +277,6 @@ config THINKPAD_ACPI_UNSAFE_LEDS
Say N here, unless you are building a kernel for your own
use, and need to control the important firmware LEDs.
-config THINKPAD_ACPI_DOCK
- bool "Legacy Docking Station Support"
- depends on THINKPAD_ACPI
- depends on ACPI_DOCK=n
- default n
- ---help---
- Allows the thinkpad_acpi driver to handle docking station events.
- This support was made obsolete by the generic ACPI docking station
- support (CONFIG_ACPI_DOCK). It will allow locking and removing the
- laptop from the docking station, but will not properly connect PCI
- devices.
-
- If you are not sure, say N here.
-
-config THINKPAD_ACPI_BAY
- bool "Legacy Removable Bay Support"
- depends on THINKPAD_ACPI
- default y
- ---help---
- Allows the thinkpad_acpi driver to handle removable bays. It will
- electrically disable the device in the bay, and also generate
- notifications when the bay lever is ejected or inserted.
-
- If you are not sure, say Y here.
-
config THINKPAD_ACPI_VIDEO
bool "Video output control support"
depends on THINKPAD_ACPI
diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c
index ec560f16d72..222ffb892f2 100644
--- a/drivers/platform/x86/eeepc-laptop.c
+++ b/drivers/platform/x86/eeepc-laptop.c
@@ -143,6 +143,7 @@ struct eeepc_hotk {
struct rfkill *bluetooth_rfkill;
struct rfkill *wwan3g_rfkill;
struct hotplug_slot *hotplug_slot;
+ struct work_struct hotplug_work;
};
/* The actual device the driver binds to */
@@ -660,7 +661,7 @@ static int eeepc_get_adapter_status(struct hotplug_slot *hotplug_slot,
return 0;
}
-static void eeepc_rfkill_hotplug(void)
+static void eeepc_hotplug_work(struct work_struct *work)
{
struct pci_dev *dev;
struct pci_bus *bus = pci_find_bus(0, 1);
@@ -701,7 +702,7 @@ static void eeepc_rfkill_notify(acpi_handle handle, u32 event, void *data)
if (event != ACPI_NOTIFY_BUS_CHECK)
return;
- eeepc_rfkill_hotplug();
+ schedule_work(&ehotk->hotplug_work);
}
static void eeepc_hotk_notify(struct acpi_device *device, u32 event)
@@ -892,7 +893,7 @@ static int eeepc_hotk_resume(struct acpi_device *device)
rfkill_set_sw_state(ehotk->wlan_rfkill, wlan != 1);
- eeepc_rfkill_hotplug();
+ schedule_work(&ehotk->hotplug_work);
}
if (ehotk->bluetooth_rfkill)
@@ -1093,6 +1094,8 @@ static int eeepc_rfkill_init(struct device *dev)
{
int result = 0;
+ INIT_WORK(&ehotk->hotplug_work, eeepc_hotplug_work);
+
eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P6");
eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P7");
diff --git a/drivers/platform/x86/hp-wmi.c b/drivers/platform/x86/hp-wmi.c
index ca508564a18..a2ad53e1587 100644
--- a/drivers/platform/x86/hp-wmi.c
+++ b/drivers/platform/x86/hp-wmi.c
@@ -520,11 +520,13 @@ static int hp_wmi_resume_handler(struct platform_device *device)
* the input layer will only actually pass it on if the state
* changed.
*/
-
- input_report_switch(hp_wmi_input_dev, SW_DOCK, hp_wmi_dock_state());
- input_report_switch(hp_wmi_input_dev, SW_TABLET_MODE,
- hp_wmi_tablet_state());
- input_sync(hp_wmi_input_dev);
+ if (hp_wmi_input_dev) {
+ input_report_switch(hp_wmi_input_dev, SW_DOCK,
+ hp_wmi_dock_state());
+ input_report_switch(hp_wmi_input_dev, SW_TABLET_MODE,
+ hp_wmi_tablet_state());
+ input_sync(hp_wmi_input_dev);
+ }
return 0;
}
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index a463fd72c49..e8560085250 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -239,12 +239,6 @@ struct ibm_init_struct {
};
static struct {
-#ifdef CONFIG_THINKPAD_ACPI_BAY
- u32 bay_status:1;
- u32 bay_eject:1;
- u32 bay_status2:1;
- u32 bay_eject2:1;
-#endif
u32 bluetooth:1;
u32 hotkey:1;
u32 hotkey_mask:1;
@@ -589,18 +583,6 @@ static int acpi_ec_write(int i, u8 v)
return 1;
}
-#if defined(CONFIG_THINKPAD_ACPI_DOCK) || defined(CONFIG_THINKPAD_ACPI_BAY)
-static int _sta(acpi_handle handle)
-{
- int status;
-
- if (!handle || !acpi_evalf(handle, &status, "_STA", "d"))
- status = 0;
-
- return status;
-}
-#endif
-
static int issue_thinkpad_cmos_command(int cmos_cmd)
{
if (!cmos_handle)
@@ -784,6 +766,8 @@ static int dispatch_procfs_write(struct file *file,
if (!ibm || !ibm->write)
return -EINVAL;
+ if (count > PAGE_SIZE - 2)
+ return -EINVAL;
kernbuf = kmalloc(count + 2, GFP_KERNEL);
if (!kernbuf)
@@ -4442,293 +4426,6 @@ static struct ibm_struct light_driver_data = {
};
/*************************************************************************
- * Dock subdriver
- */
-
-#ifdef CONFIG_THINKPAD_ACPI_DOCK
-
-static void dock_notify(struct ibm_struct *ibm, u32 event);
-static int dock_read(char *p);
-static int dock_write(char *buf);
-
-TPACPI_HANDLE(dock, root, "\\_SB.GDCK", /* X30, X31, X40 */
- "\\_SB.PCI0.DOCK", /* 600e/x,770e,770x,A2xm/p,T20-22,X20-21 */
- "\\_SB.PCI0.PCI1.DOCK", /* all others */
- "\\_SB.PCI.ISA.SLCE", /* 570 */
- ); /* A21e,G4x,R30,R31,R32,R40,R40e,R50e */
-
-/* don't list other alternatives as we install a notify handler on the 570 */
-TPACPI_HANDLE(pci, root, "\\_SB.PCI"); /* 570 */
-
-static const struct acpi_device_id ibm_pci_device_ids[] = {
- {PCI_ROOT_HID_STRING, 0},
- {"", 0},
-};
-
-static struct tp_acpi_drv_struct ibm_dock_acpidriver[2] = {
- {
- .notify = dock_notify,
- .handle = &dock_handle,
- .type = ACPI_SYSTEM_NOTIFY,
- },
- {
- /* THIS ONE MUST NEVER BE USED FOR DRIVER AUTOLOADING.
- * We just use it to get notifications of dock hotplug
- * in very old thinkpads */
- .hid = ibm_pci_device_ids,
- .notify = dock_notify,
- .handle = &pci_handle,
- .type = ACPI_SYSTEM_NOTIFY,
- },
-};
-
-static struct ibm_struct dock_driver_data[2] = {
- {
- .name = "dock",
- .read = dock_read,
- .write = dock_write,
- .acpi = &ibm_dock_acpidriver[0],
- },
- {
- .name = "dock",
- .acpi = &ibm_dock_acpidriver[1],
- },
-};
-
-#define dock_docked() (_sta(dock_handle) & 1)
-
-static int __init dock_init(struct ibm_init_struct *iibm)
-{
- vdbg_printk(TPACPI_DBG_INIT, "initializing dock subdriver\n");
-
- TPACPI_ACPIHANDLE_INIT(dock);
-
- vdbg_printk(TPACPI_DBG_INIT, "dock is %s\n",
- str_supported(dock_handle != NULL));
-
- return (dock_handle)? 0 : 1;
-}
-
-static int __init dock_init2(struct ibm_init_struct *iibm)
-{
- int dock2_needed;
-
- vdbg_printk(TPACPI_DBG_INIT, "initializing dock subdriver part 2\n");
-
- if (dock_driver_data[0].flags.acpi_driver_registered &&
- dock_driver_data[0].flags.acpi_notify_installed) {
- TPACPI_ACPIHANDLE_INIT(pci);
- dock2_needed = (pci_handle != NULL);
- vdbg_printk(TPACPI_DBG_INIT,
- "dock PCI handler for the TP 570 is %s\n",
- str_supported(dock2_needed));
- } else {
- vdbg_printk(TPACPI_DBG_INIT,
- "dock subdriver part 2 not required\n");
- dock2_needed = 0;
- }
-
- return (dock2_needed)? 0 : 1;
-}
-
-static void dock_notify(struct ibm_struct *ibm, u32 event)
-{
- int docked = dock_docked();
- int pci = ibm->acpi->hid && ibm->acpi->device &&
- acpi_match_device_ids(ibm->acpi->device, ibm_pci_device_ids);
- int data;
-
- if (event == 1 && !pci) /* 570 */
- data = 1; /* button */
- else if (event == 1 && pci) /* 570 */
- data = 3; /* dock */
- else if (event == 3 && docked)
- data = 1; /* button */
- else if (event == 3 && !docked)
- data = 2; /* undock */
- else if (event == 0 && docked)
- data = 3; /* dock */
- else {
- printk(TPACPI_ERR "unknown dock event %d, status %d\n",
- event, _sta(dock_handle));
- data = 0; /* unknown */
- }
- acpi_bus_generate_proc_event(ibm->acpi->device, event, data);
- acpi_bus_generate_netlink_event(ibm->acpi->device->pnp.device_class,
- dev_name(&ibm->acpi->device->dev),
- event, data);
-}
-
-static int dock_read(char *p)
-{
- int len = 0;
- int docked = dock_docked();
-
- if (!dock_handle)
- len += sprintf(p + len, "status:\t\tnot supported\n");
- else if (!docked)
- len += sprintf(p + len, "status:\t\tundocked\n");
- else {
- len += sprintf(p + len, "status:\t\tdocked\n");
- len += sprintf(p + len, "commands:\tdock, undock\n");
- }
-
- return len;
-}
-
-static int dock_write(char *buf)
-{
- char *cmd;
-
- if (!dock_docked())
- return -ENODEV;
-
- while ((cmd = next_cmd(&buf))) {
- if (strlencmp(cmd, "undock") == 0) {
- if (!acpi_evalf(dock_handle, NULL, "_DCK", "vd", 0) ||
- !acpi_evalf(dock_handle, NULL, "_EJ0", "vd", 1))
- return -EIO;
- } else if (strlencmp(cmd, "dock") == 0) {
- if (!acpi_evalf(dock_handle, NULL, "_DCK", "vd", 1))
- return -EIO;
- } else
- return -EINVAL;
- }
-
- return 0;
-}
-
-#endif /* CONFIG_THINKPAD_ACPI_DOCK */
-
-/*************************************************************************
- * Bay subdriver
- */
-
-#ifdef CONFIG_THINKPAD_ACPI_BAY
-
-TPACPI_HANDLE(bay, root, "\\_SB.PCI.IDE.SECN.MAST", /* 570 */
- "\\_SB.PCI0.IDE0.IDES.IDSM", /* 600e/x, 770e, 770x */
- "\\_SB.PCI0.SATA.SCND.MSTR", /* T60, X60, Z60 */
- "\\_SB.PCI0.IDE0.SCND.MSTR", /* all others */
- ); /* A21e, R30, R31 */
-TPACPI_HANDLE(bay_ej, bay, "_EJ3", /* 600e/x, A2xm/p, A3x */
- "_EJ0", /* all others */
- ); /* 570,A21e,G4x,R30,R31,R32,R40e,R50e */
-TPACPI_HANDLE(bay2, root, "\\_SB.PCI0.IDE0.PRIM.SLAV", /* A3x, R32 */
- "\\_SB.PCI0.IDE0.IDEP.IDPS", /* 600e/x, 770e, 770x */
- ); /* all others */
-TPACPI_HANDLE(bay2_ej, bay2, "_EJ3", /* 600e/x, 770e, A3x */
- "_EJ0", /* 770x */
- ); /* all others */
-
-static int __init bay_init(struct ibm_init_struct *iibm)
-{
- vdbg_printk(TPACPI_DBG_INIT, "initializing bay subdriver\n");
-
- TPACPI_ACPIHANDLE_INIT(bay);
- if (bay_handle)
- TPACPI_ACPIHANDLE_INIT(bay_ej);
- TPACPI_ACPIHANDLE_INIT(bay2);
- if (bay2_handle)
- TPACPI_ACPIHANDLE_INIT(bay2_ej);
-
- tp_features.bay_status = bay_handle &&
- acpi_evalf(bay_handle, NULL, "_STA", "qv");
- tp_features.bay_status2 = bay2_handle &&
- acpi_evalf(bay2_handle, NULL, "_STA", "qv");
-
- tp_features.bay_eject = bay_handle && bay_ej_handle &&
- (strlencmp(bay_ej_path, "_EJ0") == 0 || experimental);
- tp_features.bay_eject2 = bay2_handle && bay2_ej_handle &&
- (strlencmp(bay2_ej_path, "_EJ0") == 0 || experimental);
-
- vdbg_printk(TPACPI_DBG_INIT,
- "bay 1: status %s, eject %s; bay 2: status %s, eject %s\n",
- str_supported(tp_features.bay_status),
- str_supported(tp_features.bay_eject),
- str_supported(tp_features.bay_status2),
- str_supported(tp_features.bay_eject2));
-
- return (tp_features.bay_status || tp_features.bay_eject ||
- tp_features.bay_status2 || tp_features.bay_eject2)? 0 : 1;
-}
-
-static void bay_notify(struct ibm_struct *ibm, u32 event)
-{
- acpi_bus_generate_proc_event(ibm->acpi->device, event, 0);
- acpi_bus_generate_netlink_event(ibm->acpi->device->pnp.device_class,
- dev_name(&ibm->acpi->device->dev),
- event, 0);
-}
-
-#define bay_occupied(b) (_sta(b##_handle) & 1)
-
-static int bay_read(char *p)
-{
- int len = 0;
- int occupied = bay_occupied(bay);
- int occupied2 = bay_occupied(bay2);
- int eject, eject2;
-
- len += sprintf(p + len, "status:\t\t%s\n",
- tp_features.bay_status ?
- (occupied ? "occupied" : "unoccupied") :
- "not supported");
- if (tp_features.bay_status2)
- len += sprintf(p + len, "status2:\t%s\n", occupied2 ?
- "occupied" : "unoccupied");
-
- eject = tp_features.bay_eject && occupied;
- eject2 = tp_features.bay_eject2 && occupied2;
-
- if (eject && eject2)
- len += sprintf(p + len, "commands:\teject, eject2\n");
- else if (eject)
- len += sprintf(p + len, "commands:\teject\n");
- else if (eject2)
- len += sprintf(p + len, "commands:\teject2\n");
-
- return len;
-}
-
-static int bay_write(char *buf)
-{
- char *cmd;
-
- if (!tp_features.bay_eject && !tp_features.bay_eject2)
- return -ENODEV;
-
- while ((cmd = next_cmd(&buf))) {
- if (tp_features.bay_eject && strlencmp(cmd, "eject") == 0) {
- if (!acpi_evalf(bay_ej_handle, NULL, NULL, "vd", 1))
- return -EIO;
- } else if (tp_features.bay_eject2 &&
- strlencmp(cmd, "eject2") == 0) {
- if (!acpi_evalf(bay2_ej_handle, NULL, NULL, "vd", 1))
- return -EIO;
- } else
- return -EINVAL;
- }
-
- return 0;
-}
-
-static struct tp_acpi_drv_struct ibm_bay_acpidriver = {
- .notify = bay_notify,
- .handle = &bay_handle,
- .type = ACPI_SYSTEM_NOTIFY,
-};
-
-static struct ibm_struct bay_driver_data = {
- .name = "bay",
- .read = bay_read,
- .write = bay_write,
- .acpi = &ibm_bay_acpidriver,
-};
-
-#endif /* CONFIG_THINKPAD_ACPI_BAY */
-
-/*************************************************************************
* CMOS subdriver
*/
@@ -5945,14 +5642,48 @@ static struct backlight_ops ibm_backlight_data = {
/* --------------------------------------------------------------------- */
+/*
+ * These are only useful for models that have only one possibility
+ * of GPU. If the BIOS model handles both ATI and Intel, don't use
+ * these quirks.
+ */
+#define TPACPI_BRGHT_Q_NOEC 0x0001 /* Must NOT use EC HBRV */
+#define TPACPI_BRGHT_Q_EC 0x0002 /* Should or must use EC HBRV */
+#define TPACPI_BRGHT_Q_ASK 0x8000 /* Ask for user report */
+
+static const struct tpacpi_quirk brightness_quirk_table[] __initconst = {
+ /* Models with ATI GPUs known to require ECNVRAM mode */
+ TPACPI_Q_IBM('1', 'Y', TPACPI_BRGHT_Q_EC), /* T43/p ATI */
+
+ /* Models with ATI GPUs (waiting confirmation) */
+ TPACPI_Q_IBM('1', 'R', TPACPI_BRGHT_Q_ASK|TPACPI_BRGHT_Q_EC),
+ TPACPI_Q_IBM('1', 'Q', TPACPI_BRGHT_Q_ASK|TPACPI_BRGHT_Q_EC),
+ TPACPI_Q_IBM('7', '6', TPACPI_BRGHT_Q_ASK|TPACPI_BRGHT_Q_EC),
+ TPACPI_Q_IBM('7', '8', TPACPI_BRGHT_Q_ASK|TPACPI_BRGHT_Q_EC),
+
+ /* Models with Intel Extreme Graphics 2 (waiting confirmation) */
+ TPACPI_Q_IBM('1', 'V', TPACPI_BRGHT_Q_ASK|TPACPI_BRGHT_Q_NOEC),
+ TPACPI_Q_IBM('1', 'W', TPACPI_BRGHT_Q_ASK|TPACPI_BRGHT_Q_NOEC),
+ TPACPI_Q_IBM('1', 'U', TPACPI_BRGHT_Q_ASK|TPACPI_BRGHT_Q_NOEC),
+
+ /* Models with Intel GMA900 */
+ TPACPI_Q_IBM('7', '0', TPACPI_BRGHT_Q_NOEC), /* T43, R52 */
+ TPACPI_Q_IBM('7', '4', TPACPI_BRGHT_Q_NOEC), /* X41 */
+ TPACPI_Q_IBM('7', '5', TPACPI_BRGHT_Q_NOEC), /* X41 Tablet */
+};
+
static int __init brightness_init(struct ibm_init_struct *iibm)
{
int b;
+ unsigned long quirks;
vdbg_printk(TPACPI_DBG_INIT, "initializing brightness subdriver\n");
mutex_init(&brightness_mutex);
+ quirks = tpacpi_check_quirks(brightness_quirk_table,
+ ARRAY_SIZE(brightness_quirk_table));
+
/*
* We always attempt to detect acpi support, so as to switch
* Lenovo Vista BIOS to ACPI brightness mode even if we are not
@@ -6009,23 +5740,13 @@ static int __init brightness_init(struct ibm_init_struct *iibm)
/* TPACPI_BRGHT_MODE_AUTO not implemented yet, just use default */
if (brightness_mode == TPACPI_BRGHT_MODE_AUTO ||
brightness_mode == TPACPI_BRGHT_MODE_MAX) {
- if (thinkpad_id.vendor == PCI_VENDOR_ID_IBM) {
- /*
- * IBM models that define HBRV probably have
- * EC-based backlight level control
- */
- if (acpi_evalf(ec_handle, NULL, "HBRV", "qd"))
- /* T40-T43, R50-R52, R50e, R51e, X31-X41 */
- brightness_mode = TPACPI_BRGHT_MODE_ECNVRAM;
- else
- /* all other IBM ThinkPads */
- brightness_mode = TPACPI_BRGHT_MODE_UCMS_STEP;
- } else
- /* All Lenovo ThinkPads */
+ if (quirks & TPACPI_BRGHT_Q_EC)
+ brightness_mode = TPACPI_BRGHT_MODE_ECNVRAM;
+ else
brightness_mode = TPACPI_BRGHT_MODE_UCMS_STEP;
dbg_printk(TPACPI_DBG_BRGHT,
- "selected brightness_mode=%d\n",
+ "driver auto-selected brightness_mode=%d\n",
brightness_mode);
}
@@ -6052,6 +5773,15 @@ static int __init brightness_init(struct ibm_init_struct *iibm)
vdbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_BRGHT,
"brightness is supported\n");
+ if (quirks & TPACPI_BRGHT_Q_ASK) {
+ printk(TPACPI_NOTICE
+ "brightness: will use unverified default: "
+ "brightness_mode=%d\n", brightness_mode);
+ printk(TPACPI_NOTICE
+ "brightness: please report to %s whether it works well "
+ "or not on your ThinkPad\n", TPACPI_MAIL);
+ }
+
ibm_backlight_device->props.max_brightness =
(tp_features.bright_16levels)? 15 : 7;
ibm_backlight_device->props.brightness = b & TP_EC_BACKLIGHT_LVLMSK;
@@ -7854,22 +7584,6 @@ static struct ibm_init_struct ibms_init[] __initdata = {
.init = light_init,
.data = &light_driver_data,
},
-#ifdef CONFIG_THINKPAD_ACPI_DOCK
- {
- .init = dock_init,
- .data = &dock_driver_data[0],
- },
- {
- .init = dock_init2,
- .data = &dock_driver_data[1],
- },
-#endif
-#ifdef CONFIG_THINKPAD_ACPI_BAY
- {
- .init = bay_init,
- .data = &bay_driver_data,
- },
-#endif
{
.init = cmos_init,
.data = &cmos_driver_data,
@@ -7968,12 +7682,6 @@ TPACPI_PARAM(hotkey);
TPACPI_PARAM(bluetooth);
TPACPI_PARAM(video);
TPACPI_PARAM(light);
-#ifdef CONFIG_THINKPAD_ACPI_DOCK
-TPACPI_PARAM(dock);
-#endif
-#ifdef CONFIG_THINKPAD_ACPI_BAY
-TPACPI_PARAM(bay);
-#endif /* CONFIG_THINKPAD_ACPI_BAY */
TPACPI_PARAM(cmos);
TPACPI_PARAM(led);
TPACPI_PARAM(beep);
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index 7eda34838bf..bdbc4f73fcd 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -43,6 +43,13 @@ config BATTERY_DS2760
help
Say Y here to enable support for batteries with ds2760 chip.
+config BATTERY_DS2782
+ tristate "DS2782 standalone gas-gauge"
+ depends on I2C
+ help
+ Say Y here to enable support for the DS2782 standalone battery
+ gas-gauge.
+
config BATTERY_PMU
tristate "Apple PMU battery"
depends on PPC32 && ADB_PMU
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index daf3179689a..380d17c9ae2 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -19,6 +19,7 @@ obj-$(CONFIG_APM_POWER) += apm_power.o
obj-$(CONFIG_WM8350_POWER) += wm8350_power.o
obj-$(CONFIG_BATTERY_DS2760) += ds2760_battery.o
+obj-$(CONFIG_BATTERY_DS2782) += ds2782_battery.o
obj-$(CONFIG_BATTERY_PMU) += pmu_battery.o
obj-$(CONFIG_BATTERY_OLPC) += olpc_battery.o
obj-$(CONFIG_BATTERY_TOSA) += tosa_battery.o
diff --git a/drivers/power/ds2782_battery.c b/drivers/power/ds2782_battery.c
new file mode 100644
index 00000000000..da14f374cb6
--- /dev/null
+++ b/drivers/power/ds2782_battery.c
@@ -0,0 +1,330 @@
+/*
+ * I2C client/driver for the Maxim/Dallas DS2782 Stand-Alone Fuel Gauge IC
+ *
+ * Copyright (C) 2009 Bluewater Systems Ltd
+ *
+ * Author: Ryan Mallon <ryan@bluewatersys.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/swab.h>
+#include <linux/i2c.h>
+#include <linux/idr.h>
+#include <linux/power_supply.h>
+
+#define DS2782_REG_RARC 0x06 /* Remaining active relative capacity */
+
+#define DS2782_REG_VOLT_MSB 0x0c
+#define DS2782_REG_TEMP_MSB 0x0a
+#define DS2782_REG_CURRENT_MSB 0x0e
+
+/* EEPROM Block */
+#define DS2782_REG_RSNSP 0x69 /* Sense resistor value */
+
+/* Current unit measurement in uA for a 1 milli-ohm sense resistor */
+#define DS2782_CURRENT_UNITS 1563
+
+#define to_ds2782_info(x) container_of(x, struct ds2782_info, battery)
+
+struct ds2782_info {
+ struct i2c_client *client;
+ struct power_supply battery;
+ int id;
+};
+
+static DEFINE_IDR(battery_id);
+static DEFINE_MUTEX(battery_lock);
+
+static inline int ds2782_read_reg(struct ds2782_info *info, int reg, u8 *val)
+{
+ int ret;
+
+ ret = i2c_smbus_read_byte_data(info->client, reg);
+ if (ret < 0) {
+ dev_err(&info->client->dev, "register read failed\n");
+ return ret;
+ }
+
+ *val = ret;
+ return 0;
+}
+
+static inline int ds2782_read_reg16(struct ds2782_info *info, int reg_msb,
+ s16 *val)
+{
+ int ret;
+
+ ret = swab16(i2c_smbus_read_word_data(info->client, reg_msb));
+ if (ret < 0) {
+ dev_err(&info->client->dev, "register read failed\n");
+ return ret;
+ }
+
+ *val = ret;
+ return 0;
+}
+
+static int ds2782_get_temp(struct ds2782_info *info, int *temp)
+{
+ s16 raw;
+ int err;
+
+ /*
+ * Temperature is measured in units of 0.125 degrees celcius, the
+ * power_supply class measures temperature in tenths of degrees
+ * celsius. The temperature value is stored as a 10 bit number, plus
+ * sign in the upper bits of a 16 bit register.
+ */
+ err = ds2782_read_reg16(info, DS2782_REG_TEMP_MSB, &raw);
+ if (err)
+ return err;
+ *temp = ((raw / 32) * 125) / 100;
+ return 0;
+}
+
+static int ds2782_get_current(struct ds2782_info *info, int *current_uA)
+{
+ int sense_res;
+ int err;
+ u8 sense_res_raw;
+ s16 raw;
+
+ /*
+ * The units of measurement for current are dependent on the value of
+ * the sense resistor.
+ */
+ err = ds2782_read_reg(info, DS2782_REG_RSNSP, &sense_res_raw);
+ if (err)
+ return err;
+ if (sense_res_raw == 0) {
+ dev_err(&info->client->dev, "sense resistor value is 0\n");
+ return -ENXIO;
+ }
+ sense_res = 1000 / sense_res_raw;
+
+ dev_dbg(&info->client->dev, "sense resistor = %d milli-ohms\n",
+ sense_res);
+ err = ds2782_read_reg16(info, DS2782_REG_CURRENT_MSB, &raw);
+ if (err)
+ return err;
+ *current_uA = raw * (DS2782_CURRENT_UNITS / sense_res);
+ return 0;
+}
+
+static int ds2782_get_voltage(struct ds2782_info *info, int *voltage_uA)
+{
+ s16 raw;
+ int err;
+
+ /*
+ * Voltage is measured in units of 4.88mV. The voltage is stored as
+ * a 10-bit number plus sign, in the upper bits of a 16-bit register
+ */
+ err = ds2782_read_reg16(info, DS2782_REG_VOLT_MSB, &raw);
+ if (err)
+ return err;
+ *voltage_uA = (raw / 32) * 4800;
+ return 0;
+}
+
+static int ds2782_get_capacity(struct ds2782_info *info, int *capacity)
+{
+ int err;
+ u8 raw;
+
+ err = ds2782_read_reg(info, DS2782_REG_RARC, &raw);
+ if (err)
+ return err;
+ *capacity = raw;
+ return raw;
+}
+
+static int ds2782_get_status(struct ds2782_info *info, int *status)
+{
+ int err;
+ int current_uA;
+ int capacity;
+
+ err = ds2782_get_current(info, &current_uA);
+ if (err)
+ return err;
+
+ err = ds2782_get_capacity(info, &capacity);
+ if (err)
+ return err;
+
+ if (capacity == 100)
+ *status = POWER_SUPPLY_STATUS_FULL;
+ else if (current_uA == 0)
+ *status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ else if (current_uA < 0)
+ *status = POWER_SUPPLY_STATUS_DISCHARGING;
+ else
+ *status = POWER_SUPPLY_STATUS_CHARGING;
+
+ return 0;
+}
+
+static int ds2782_battery_get_property(struct power_supply *psy,
+ enum power_supply_property prop,
+ union power_supply_propval *val)
+{
+ struct ds2782_info *info = to_ds2782_info(psy);
+ int ret;
+
+ switch (prop) {
+ case POWER_SUPPLY_PROP_STATUS:
+ ret = ds2782_get_status(info, &val->intval);
+ break;
+
+ case POWER_SUPPLY_PROP_CAPACITY:
+ ret = ds2782_get_capacity(info, &val->intval);
+ break;
+
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ ret = ds2782_get_voltage(info, &val->intval);
+ break;
+
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ ret = ds2782_get_current(info, &val->intval);
+ break;
+
+ case POWER_SUPPLY_PROP_TEMP:
+ ret = ds2782_get_temp(info, &val->intval);
+ break;
+
+ default:
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
+static enum power_supply_property ds2782_battery_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_CAPACITY,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_TEMP,
+};
+
+static void ds2782_power_supply_init(struct power_supply *battery)
+{
+ battery->type = POWER_SUPPLY_TYPE_BATTERY;
+ battery->properties = ds2782_battery_props;
+ battery->num_properties = ARRAY_SIZE(ds2782_battery_props);
+ battery->get_property = ds2782_battery_get_property;
+ battery->external_power_changed = NULL;
+}
+
+static int ds2782_battery_remove(struct i2c_client *client)
+{
+ struct ds2782_info *info = i2c_get_clientdata(client);
+
+ power_supply_unregister(&info->battery);
+ kfree(info->battery.name);
+
+ mutex_lock(&battery_lock);
+ idr_remove(&battery_id, info->id);
+ mutex_unlock(&battery_lock);
+
+ i2c_set_clientdata(client, info);
+
+ kfree(info);
+ return 0;
+}
+
+static int ds2782_battery_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct ds2782_info *info;
+ int ret;
+ int num;
+
+ /* Get an ID for this battery */
+ ret = idr_pre_get(&battery_id, GFP_KERNEL);
+ if (ret == 0) {
+ ret = -ENOMEM;
+ goto fail_id;
+ }
+
+ mutex_lock(&battery_lock);
+ ret = idr_get_new(&battery_id, client, &num);
+ mutex_unlock(&battery_lock);
+ if (ret < 0)
+ goto fail_id;
+
+ info = kzalloc(sizeof(*info), GFP_KERNEL);
+ if (!info) {
+ ret = -ENOMEM;
+ goto fail_info;
+ }
+
+ info->battery.name = kasprintf(GFP_KERNEL, "ds2782-%d", num);
+ if (!info->battery.name) {
+ ret = -ENOMEM;
+ goto fail_name;
+ }
+
+ i2c_set_clientdata(client, info);
+ info->client = client;
+ ds2782_power_supply_init(&info->battery);
+
+ ret = power_supply_register(&client->dev, &info->battery);
+ if (ret) {
+ dev_err(&client->dev, "failed to register battery\n");
+ goto fail_register;
+ }
+
+ return 0;
+
+fail_register:
+ kfree(info->battery.name);
+fail_name:
+ i2c_set_clientdata(client, info);
+ kfree(info);
+fail_info:
+ mutex_lock(&battery_lock);
+ idr_remove(&battery_id, num);
+ mutex_unlock(&battery_lock);
+fail_id:
+ return ret;
+}
+
+static const struct i2c_device_id ds2782_id[] = {
+ {"ds2782", 0},
+ {},
+};
+
+static struct i2c_driver ds2782_battery_driver = {
+ .driver = {
+ .name = "ds2782-battery",
+ },
+ .probe = ds2782_battery_probe,
+ .remove = ds2782_battery_remove,
+ .id_table = ds2782_id,
+};
+
+static int __init ds2782_init(void)
+{
+ return i2c_add_driver(&ds2782_battery_driver);
+}
+module_init(ds2782_init);
+
+static void __exit ds2782_exit(void)
+{
+ i2c_del_driver(&ds2782_battery_driver);
+}
+module_exit(ds2782_exit);
+
+MODULE_AUTHOR("Ryan Mallon <ryan@bluewatersys.com>");
+MODULE_DESCRIPTION("Maxim/Dallas DS2782 Stand-Alone Fuel Gauage IC driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/olpc_battery.c b/drivers/power/olpc_battery.c
index 5fbca2681ba..58e419299cd 100644
--- a/drivers/power/olpc_battery.c
+++ b/drivers/power/olpc_battery.c
@@ -8,6 +8,7 @@
* published by the Free Software Foundation.
*/
+#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/err.h>
#include <linux/platform_device.h>
@@ -35,6 +36,7 @@
#define BAT_STAT_AC 0x10
#define BAT_STAT_CHARGING 0x20
#define BAT_STAT_DISCHARGING 0x40
+#define BAT_STAT_TRICKLE 0x80
#define BAT_ERR_INFOFAIL 0x02
#define BAT_ERR_OVERVOLTAGE 0x04
@@ -89,7 +91,7 @@ static char bat_serial[17]; /* Ick */
static int olpc_bat_get_status(union power_supply_propval *val, uint8_t ec_byte)
{
if (olpc_platform_info.ecver > 0x44) {
- if (ec_byte & BAT_STAT_CHARGING)
+ if (ec_byte & (BAT_STAT_CHARGING | BAT_STAT_TRICKLE))
val->intval = POWER_SUPPLY_STATUS_CHARGING;
else if (ec_byte & BAT_STAT_DISCHARGING)
val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
@@ -219,7 +221,8 @@ static int olpc_bat_get_property(struct power_supply *psy,
It doesn't matter though -- the EC will return the last-known
information, and it's as if we just ran that _little_ bit faster
and managed to read it out before the battery went away. */
- if (!(ec_byte & BAT_STAT_PRESENT) && psp != POWER_SUPPLY_PROP_PRESENT)
+ if (!(ec_byte & (BAT_STAT_PRESENT | BAT_STAT_TRICKLE)) &&
+ psp != POWER_SUPPLY_PROP_PRESENT)
return -ENODEV;
switch (psp) {
@@ -229,7 +232,8 @@ static int olpc_bat_get_property(struct power_supply *psy,
return ret;
break;
case POWER_SUPPLY_PROP_PRESENT:
- val->intval = !!(ec_byte & BAT_STAT_PRESENT);
+ val->intval = !!(ec_byte & (BAT_STAT_PRESENT |
+ BAT_STAT_TRICKLE));
break;
case POWER_SUPPLY_PROP_HEALTH:
@@ -334,21 +338,21 @@ static ssize_t olpc_bat_eeprom_read(struct kobject *kobj,
struct bin_attribute *attr, char *buf, loff_t off, size_t count)
{
uint8_t ec_byte;
- int ret, end;
+ int ret;
+ int i;
if (off >= EEPROM_SIZE)
return 0;
if (off + count > EEPROM_SIZE)
count = EEPROM_SIZE - off;
- end = EEPROM_START + off + count;
- for (ec_byte = EEPROM_START + off; ec_byte < end; ec_byte++) {
- ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1,
- &buf[ec_byte - EEPROM_START], 1);
+ for (i = 0; i < count; i++) {
+ ec_byte = EEPROM_START + off + i;
+ ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1, &buf[i], 1);
if (ret) {
- printk(KERN_ERR "olpc-battery: EC command "
- "EC_BAT_EEPROM @ 0x%x failed -"
- " %d!\n", ec_byte, ret);
+ pr_err("olpc-battery: "
+ "EC_BAT_EEPROM cmd @ 0x%x failed - %d!\n",
+ ec_byte, ret);
return -EIO;
}
}
diff --git a/drivers/s390/scsi/zfcp_erp.c b/drivers/s390/scsi/zfcp_erp.c
index 8030e25152f..c75d6f35cb5 100644
--- a/drivers/s390/scsi/zfcp_erp.c
+++ b/drivers/s390/scsi/zfcp_erp.c
@@ -553,40 +553,35 @@ static void _zfcp_erp_unit_reopen_all(struct zfcp_port *port, int clear,
_zfcp_erp_unit_reopen(unit, clear, id, ref);
}
-static void zfcp_erp_strategy_followup_actions(struct zfcp_erp_action *act)
+static void zfcp_erp_strategy_followup_failed(struct zfcp_erp_action *act)
{
- struct zfcp_adapter *adapter = act->adapter;
- struct zfcp_port *port = act->port;
- struct zfcp_unit *unit = act->unit;
- u32 status = act->status;
-
- /* initiate follow-up actions depending on success of finished action */
switch (act->action) {
-
case ZFCP_ERP_ACTION_REOPEN_ADAPTER:
- if (status == ZFCP_ERP_SUCCEEDED)
- _zfcp_erp_port_reopen_all(adapter, 0, "ersfa_1", NULL);
- else
- _zfcp_erp_adapter_reopen(adapter, 0, "ersfa_2", NULL);
+ _zfcp_erp_adapter_reopen(act->adapter, 0, "ersff_1", NULL);
break;
-
case ZFCP_ERP_ACTION_REOPEN_PORT_FORCED:
- if (status == ZFCP_ERP_SUCCEEDED)
- _zfcp_erp_port_reopen(port, 0, "ersfa_3", NULL);
- else
- _zfcp_erp_adapter_reopen(adapter, 0, "ersfa_4", NULL);
+ _zfcp_erp_port_forced_reopen(act->port, 0, "ersff_2", NULL);
break;
-
case ZFCP_ERP_ACTION_REOPEN_PORT:
- if (status == ZFCP_ERP_SUCCEEDED)
- _zfcp_erp_unit_reopen_all(port, 0, "ersfa_5", NULL);
- else
- _zfcp_erp_port_forced_reopen(port, 0, "ersfa_6", NULL);
+ _zfcp_erp_port_reopen(act->port, 0, "ersff_3", NULL);
break;
-
case ZFCP_ERP_ACTION_REOPEN_UNIT:
- if (status != ZFCP_ERP_SUCCEEDED)
- _zfcp_erp_port_reopen(unit->port, 0, "ersfa_7", NULL);
+ _zfcp_erp_unit_reopen(act->unit, 0, "ersff_4", NULL);
+ break;
+ }
+}
+
+static void zfcp_erp_strategy_followup_success(struct zfcp_erp_action *act)
+{
+ switch (act->action) {
+ case ZFCP_ERP_ACTION_REOPEN_ADAPTER:
+ _zfcp_erp_port_reopen_all(act->adapter, 0, "ersfs_1", NULL);
+ break;
+ case ZFCP_ERP_ACTION_REOPEN_PORT_FORCED:
+ _zfcp_erp_port_reopen(act->port, 0, "ersfs_2", NULL);
+ break;
+ case ZFCP_ERP_ACTION_REOPEN_PORT:
+ _zfcp_erp_unit_reopen_all(act->port, 0, "ersfs_3", NULL);
break;
}
}
@@ -801,7 +796,7 @@ static int zfcp_erp_port_forced_strategy(struct zfcp_erp_action *erp_action)
return ZFCP_ERP_FAILED;
case ZFCP_ERP_STEP_PHYS_PORT_CLOSING:
- if (status & ZFCP_STATUS_PORT_PHYS_OPEN)
+ if (!(status & ZFCP_STATUS_PORT_PHYS_OPEN))
return ZFCP_ERP_SUCCEEDED;
}
return ZFCP_ERP_FAILED;
@@ -853,11 +848,17 @@ void zfcp_erp_port_strategy_open_lookup(struct work_struct *work)
gid_pn_work);
retval = zfcp_fc_ns_gid_pn(&port->erp_action);
- if (retval == -ENOMEM)
- zfcp_erp_notify(&port->erp_action, ZFCP_ERP_NOMEM);
- port->erp_action.step = ZFCP_ERP_STEP_NAMESERVER_LOOKUP;
- if (retval)
- zfcp_erp_notify(&port->erp_action, ZFCP_ERP_FAILED);
+ if (!retval) {
+ port->erp_action.step = ZFCP_ERP_STEP_NAMESERVER_LOOKUP;
+ goto out;
+ }
+ if (retval == -ENOMEM) {
+ zfcp_erp_notify(&port->erp_action, ZFCP_STATUS_ERP_LOWMEM);
+ goto out;
+ }
+ /* all other error condtions */
+ zfcp_erp_notify(&port->erp_action, 0);
+out:
zfcp_port_put(port);
}
@@ -1289,7 +1290,10 @@ static int zfcp_erp_strategy(struct zfcp_erp_action *erp_action)
retval = zfcp_erp_strategy_statechange(erp_action, retval);
if (retval == ZFCP_ERP_EXIT)
goto unlock;
- zfcp_erp_strategy_followup_actions(erp_action);
+ if (retval == ZFCP_ERP_SUCCEEDED)
+ zfcp_erp_strategy_followup_success(erp_action);
+ if (retval == ZFCP_ERP_FAILED)
+ zfcp_erp_strategy_followup_failed(erp_action);
unlock:
write_unlock(&adapter->erp_lock);
diff --git a/drivers/s390/scsi/zfcp_fc.c b/drivers/s390/scsi/zfcp_fc.c
index 2f0705d76b7..47daebfa7e5 100644
--- a/drivers/s390/scsi/zfcp_fc.c
+++ b/drivers/s390/scsi/zfcp_fc.c
@@ -79,11 +79,9 @@ static int zfcp_wka_port_get(struct zfcp_wka_port *wka_port)
mutex_unlock(&wka_port->mutex);
- wait_event_timeout(
- wka_port->completion_wq,
- wka_port->status == ZFCP_WKA_PORT_ONLINE ||
- wka_port->status == ZFCP_WKA_PORT_OFFLINE,
- HZ >> 1);
+ wait_event(wka_port->completion_wq,
+ wka_port->status == ZFCP_WKA_PORT_ONLINE ||
+ wka_port->status == ZFCP_WKA_PORT_OFFLINE);
if (wka_port->status == ZFCP_WKA_PORT_ONLINE) {
atomic_inc(&wka_port->refcount);
diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c
index c57658f3d34..47795fbf081 100644
--- a/drivers/s390/scsi/zfcp_fsf.c
+++ b/drivers/s390/scsi/zfcp_fsf.c
@@ -670,8 +670,11 @@ static int zfcp_fsf_req_sbal_get(struct zfcp_adapter *adapter)
zfcp_fsf_sbal_check(adapter), 5 * HZ);
if (ret > 0)
return 0;
- if (!ret)
+ if (!ret) {
atomic_inc(&adapter->qdio_outb_full);
+ /* assume hanging outbound queue, try queue recovery */
+ zfcp_erp_adapter_reopen(adapter, 0, "fsrsg_1", NULL);
+ }
spin_lock_bh(&adapter->req_q_lock);
return -EIO;
@@ -722,7 +725,7 @@ static struct zfcp_fsf_req *zfcp_fsf_req_create(struct zfcp_adapter *adapter,
req = zfcp_fsf_alloc_qtcb(pool);
if (unlikely(!req))
- return ERR_PTR(-EIO);
+ return ERR_PTR(-ENOMEM);
if (adapter->req_no == 0)
adapter->req_no++;
@@ -1010,6 +1013,23 @@ skip_fsfstatus:
send_ct->handler(send_ct->handler_data);
}
+static void zfcp_fsf_setup_ct_els_unchained(struct qdio_buffer_element *sbale,
+ struct scatterlist *sg_req,
+ struct scatterlist *sg_resp)
+{
+ sbale[0].flags |= SBAL_FLAGS0_TYPE_WRITE_READ;
+ sbale[2].addr = sg_virt(sg_req);
+ sbale[2].length = sg_req->length;
+ sbale[3].addr = sg_virt(sg_resp);
+ sbale[3].length = sg_resp->length;
+ sbale[3].flags |= SBAL_FLAGS_LAST_ENTRY;
+}
+
+static int zfcp_fsf_one_sbal(struct scatterlist *sg)
+{
+ return sg_is_last(sg) && sg->length <= PAGE_SIZE;
+}
+
static int zfcp_fsf_setup_ct_els_sbals(struct zfcp_fsf_req *req,
struct scatterlist *sg_req,
struct scatterlist *sg_resp,
@@ -1020,30 +1040,30 @@ static int zfcp_fsf_setup_ct_els_sbals(struct zfcp_fsf_req *req,
int bytes;
if (!(feat & FSF_FEATURE_ELS_CT_CHAINED_SBALS)) {
- if (sg_req->length > PAGE_SIZE || sg_resp->length > PAGE_SIZE ||
- !sg_is_last(sg_req) || !sg_is_last(sg_resp))
+ if (!zfcp_fsf_one_sbal(sg_req) || !zfcp_fsf_one_sbal(sg_resp))
return -EOPNOTSUPP;
- sbale[0].flags |= SBAL_FLAGS0_TYPE_WRITE_READ;
- sbale[2].addr = sg_virt(sg_req);
- sbale[2].length = sg_req->length;
- sbale[3].addr = sg_virt(sg_resp);
- sbale[3].length = sg_resp->length;
- sbale[3].flags |= SBAL_FLAGS_LAST_ENTRY;
+ zfcp_fsf_setup_ct_els_unchained(sbale, sg_req, sg_resp);
+ return 0;
+ }
+
+ /* use single, unchained SBAL if it can hold the request */
+ if (zfcp_fsf_one_sbal(sg_req) && zfcp_fsf_one_sbal(sg_resp)) {
+ zfcp_fsf_setup_ct_els_unchained(sbale, sg_req, sg_resp);
return 0;
}
bytes = zfcp_qdio_sbals_from_sg(req, SBAL_FLAGS0_TYPE_WRITE_READ,
sg_req, max_sbals);
if (bytes <= 0)
- return -ENOMEM;
+ return -EIO;
req->qtcb->bottom.support.req_buf_length = bytes;
req->sbale_curr = ZFCP_LAST_SBALE_PER_SBAL;
bytes = zfcp_qdio_sbals_from_sg(req, SBAL_FLAGS0_TYPE_WRITE_READ,
sg_resp, max_sbals);
if (bytes <= 0)
- return -ENOMEM;
+ return -EIO;
req->qtcb->bottom.support.resp_buf_length = bytes;
return 0;
@@ -1607,10 +1627,10 @@ static void zfcp_fsf_open_wka_port_handler(struct zfcp_fsf_req *req)
case FSF_ACCESS_DENIED:
wka_port->status = ZFCP_WKA_PORT_OFFLINE;
break;
- case FSF_PORT_ALREADY_OPEN:
- break;
case FSF_GOOD:
wka_port->handle = header->port_handle;
+ /* fall through */
+ case FSF_PORT_ALREADY_OPEN:
wka_port->status = ZFCP_WKA_PORT_ONLINE;
}
out:
@@ -1731,15 +1751,16 @@ static void zfcp_fsf_close_physical_port_handler(struct zfcp_fsf_req *req)
zfcp_fsf_access_denied_port(req, port);
break;
case FSF_PORT_BOXED:
- zfcp_erp_port_boxed(port, "fscpph2", req);
- req->status |= ZFCP_STATUS_FSFREQ_ERROR |
- ZFCP_STATUS_FSFREQ_RETRY;
/* can't use generic zfcp_erp_modify_port_status because
* ZFCP_STATUS_COMMON_OPEN must not be reset for the port */
atomic_clear_mask(ZFCP_STATUS_PORT_PHYS_OPEN, &port->status);
list_for_each_entry(unit, &port->unit_list_head, list)
atomic_clear_mask(ZFCP_STATUS_COMMON_OPEN,
&unit->status);
+ zfcp_erp_port_boxed(port, "fscpph2", req);
+ req->status |= ZFCP_STATUS_FSFREQ_ERROR |
+ ZFCP_STATUS_FSFREQ_RETRY;
+
break;
case FSF_ADAPTER_STATUS_AVAILABLE:
switch (header->fsf_status_qual.word[0]) {
@@ -2541,7 +2562,6 @@ struct zfcp_fsf_req *zfcp_fsf_control_file(struct zfcp_adapter *adapter,
bytes = zfcp_qdio_sbals_from_sg(req, direction, fsf_cfdc->sg,
FSF_MAX_SBALS_PER_REQ);
if (bytes != ZFCP_CFDC_MAX_SIZE) {
- retval = -ENOMEM;
zfcp_fsf_req_free(req);
goto out;
}
diff --git a/drivers/s390/scsi/zfcp_scsi.c b/drivers/s390/scsi/zfcp_scsi.c
index 967ede73f4c..6925a178468 100644
--- a/drivers/s390/scsi/zfcp_scsi.c
+++ b/drivers/s390/scsi/zfcp_scsi.c
@@ -167,20 +167,21 @@ static int zfcp_scsi_eh_abort_handler(struct scsi_cmnd *scpnt)
struct zfcp_unit *unit = scpnt->device->hostdata;
struct zfcp_fsf_req *old_req, *abrt_req;
unsigned long flags;
- unsigned long old_req_id = (unsigned long) scpnt->host_scribble;
+ unsigned long old_reqid = (unsigned long) scpnt->host_scribble;
int retval = SUCCESS;
int retry = 3;
+ char *dbf_tag;
/* avoid race condition between late normal completion and abort */
write_lock_irqsave(&adapter->abort_lock, flags);
spin_lock(&adapter->req_list_lock);
- old_req = zfcp_reqlist_find(adapter, old_req_id);
+ old_req = zfcp_reqlist_find(adapter, old_reqid);
spin_unlock(&adapter->req_list_lock);
if (!old_req) {
write_unlock_irqrestore(&adapter->abort_lock, flags);
zfcp_scsi_dbf_event_abort("lte1", adapter, scpnt, NULL,
- old_req_id);
+ old_reqid);
return FAILED; /* completion could be in progress */
}
old_req->data = NULL;
@@ -189,7 +190,7 @@ static int zfcp_scsi_eh_abort_handler(struct scsi_cmnd *scpnt)
write_unlock_irqrestore(&adapter->abort_lock, flags);
while (retry--) {
- abrt_req = zfcp_fsf_abort_fcp_command(old_req_id, unit);
+ abrt_req = zfcp_fsf_abort_fcp_command(old_reqid, unit);
if (abrt_req)
break;
@@ -197,7 +198,7 @@ static int zfcp_scsi_eh_abort_handler(struct scsi_cmnd *scpnt)
if (!(atomic_read(&adapter->status) &
ZFCP_STATUS_COMMON_RUNNING)) {
zfcp_scsi_dbf_event_abort("nres", adapter, scpnt, NULL,
- old_req_id);
+ old_reqid);
return SUCCESS;
}
}
@@ -208,13 +209,14 @@ static int zfcp_scsi_eh_abort_handler(struct scsi_cmnd *scpnt)
abrt_req->status & ZFCP_STATUS_FSFREQ_COMPLETED);
if (abrt_req->status & ZFCP_STATUS_FSFREQ_ABORTSUCCEEDED)
- zfcp_scsi_dbf_event_abort("okay", adapter, scpnt, abrt_req, 0);
+ dbf_tag = "okay";
else if (abrt_req->status & ZFCP_STATUS_FSFREQ_ABORTNOTNEEDED)
- zfcp_scsi_dbf_event_abort("lte2", adapter, scpnt, abrt_req, 0);
+ dbf_tag = "lte2";
else {
- zfcp_scsi_dbf_event_abort("fail", adapter, scpnt, abrt_req, 0);
+ dbf_tag = "fail";
retval = FAILED;
}
+ zfcp_scsi_dbf_event_abort(dbf_tag, adapter, scpnt, abrt_req, old_reqid);
zfcp_fsf_req_free(abrt_req);
return retval;
}
@@ -534,6 +536,9 @@ static void zfcp_scsi_rport_register(struct zfcp_port *port)
struct fc_rport_identifiers ids;
struct fc_rport *rport;
+ if (port->rport)
+ return;
+
ids.node_name = port->wwnn;
ids.port_name = port->wwpn;
ids.port_id = port->d_id;
@@ -557,8 +562,10 @@ static void zfcp_scsi_rport_block(struct zfcp_port *port)
{
struct fc_rport *rport = port->rport;
- if (rport)
+ if (rport) {
fc_remote_port_delete(rport);
+ port->rport = NULL;
+ }
}
void zfcp_scsi_schedule_rport_register(struct zfcp_port *port)
diff --git a/drivers/s390/scsi/zfcp_sysfs.c b/drivers/s390/scsi/zfcp_sysfs.c
index 3e51e64d110..0fe5cce818c 100644
--- a/drivers/s390/scsi/zfcp_sysfs.c
+++ b/drivers/s390/scsi/zfcp_sysfs.c
@@ -494,9 +494,14 @@ static ssize_t zfcp_sysfs_adapter_q_full_show(struct device *dev,
struct Scsi_Host *scsi_host = class_to_shost(dev);
struct zfcp_adapter *adapter =
(struct zfcp_adapter *) scsi_host->hostdata[0];
+ u64 util;
+
+ spin_lock_bh(&adapter->qdio_stat_lock);
+ util = adapter->req_q_util;
+ spin_unlock_bh(&adapter->qdio_stat_lock);
return sprintf(buf, "%d %llu\n", atomic_read(&adapter->qdio_outb_full),
- (unsigned long long)adapter->req_q_util);
+ (unsigned long long)util);
}
static DEVICE_ATTR(queue_full, S_IRUGO, zfcp_sysfs_adapter_q_full_show, NULL);
diff --git a/drivers/scsi/libfc/fc_exch.c b/drivers/scsi/libfc/fc_exch.c
index 2bc22be5f84..145ab9ba55e 100644
--- a/drivers/scsi/libfc/fc_exch.c
+++ b/drivers/scsi/libfc/fc_exch.c
@@ -415,9 +415,9 @@ static void fc_exch_timeout(struct work_struct *work)
e_stat = ep->esb_stat;
if (e_stat & ESB_ST_COMPLETE) {
ep->esb_stat = e_stat & ~ESB_ST_REC_QUAL;
+ spin_unlock_bh(&ep->ex_lock);
if (e_stat & ESB_ST_REC_QUAL)
fc_exch_rrq(ep);
- spin_unlock_bh(&ep->ex_lock);
goto done;
} else {
resp = ep->resp;
@@ -1624,14 +1624,14 @@ static void fc_exch_rrq(struct fc_exch *ep)
struct fc_lport *lp;
struct fc_els_rrq *rrq;
struct fc_frame *fp;
- struct fc_seq *rrq_sp;
u32 did;
lp = ep->lp;
fp = fc_frame_alloc(lp, sizeof(*rrq));
if (!fp)
- return;
+ goto retry;
+
rrq = fc_frame_payload_get(fp, sizeof(*rrq));
memset(rrq, 0, sizeof(*rrq));
rrq->rrq_cmd = ELS_RRQ;
@@ -1647,13 +1647,20 @@ static void fc_exch_rrq(struct fc_exch *ep)
fc_host_port_id(lp->host), FC_TYPE_ELS,
FC_FC_FIRST_SEQ | FC_FC_END_SEQ | FC_FC_SEQ_INIT, 0);
- rrq_sp = fc_exch_seq_send(lp, fp, fc_exch_rrq_resp, NULL, ep,
- lp->e_d_tov);
- if (!rrq_sp) {
- ep->esb_stat |= ESB_ST_REC_QUAL;
- fc_exch_timer_set_locked(ep, ep->r_a_tov);
+ if (fc_exch_seq_send(lp, fp, fc_exch_rrq_resp, NULL, ep, lp->e_d_tov))
+ return;
+
+retry:
+ spin_lock_bh(&ep->ex_lock);
+ if (ep->state & (FC_EX_RST_CLEANUP | FC_EX_DONE)) {
+ spin_unlock_bh(&ep->ex_lock);
+ /* drop hold for rec qual */
+ fc_exch_release(ep);
return;
}
+ ep->esb_stat |= ESB_ST_REC_QUAL;
+ fc_exch_timer_set_locked(ep, ep->r_a_tov);
+ spin_unlock_bh(&ep->ex_lock);
}
diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c
index 716cc344c5d..a751f6230c2 100644
--- a/drivers/scsi/libiscsi.c
+++ b/drivers/scsi/libiscsi.c
@@ -1974,10 +1974,10 @@ int iscsi_eh_abort(struct scsi_cmnd *sc)
* good and have never sent us a successful tmf response
* then sent more data for the cmd.
*/
- spin_lock(&session->lock);
+ spin_lock_bh(&session->lock);
fail_scsi_task(task, DID_ABORT);
conn->tmf_state = TMF_INITIAL;
- spin_unlock(&session->lock);
+ spin_unlock_bh(&session->lock);
iscsi_start_tx(conn);
goto success_unlocked;
case TMF_TIMEDOUT:
diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c
index 54fa1e42dc4..b3381959acc 100644
--- a/drivers/scsi/libsas/sas_expander.c
+++ b/drivers/scsi/libsas/sas_expander.c
@@ -766,6 +766,7 @@ static int sas_ex_join_wide_port(struct domain_device *parent, int phy_id)
if (!memcmp(phy->attached_sas_addr, ephy->attached_sas_addr,
SAS_ADDR_SIZE) && ephy->port) {
sas_port_add_phy(ephy->port, phy->phy);
+ phy->port = ephy->port;
phy->phy_state = PHY_DEVICE_DISCOVERED;
return 0;
}
@@ -945,11 +946,21 @@ static int sas_ex_discover_dev(struct domain_device *dev, int phy_id)
if (ex->ex_phy[i].phy_state == PHY_VACANT ||
ex->ex_phy[i].phy_state == PHY_NOT_PRESENT)
continue;
-
+ /*
+ * Due to races, the phy might not get added to the
+ * wide port, so we add the phy to the wide port here.
+ */
if (SAS_ADDR(ex->ex_phy[i].attached_sas_addr) ==
- SAS_ADDR(child->sas_addr))
+ SAS_ADDR(child->sas_addr)) {
ex->ex_phy[i].phy_state= PHY_DEVICE_DISCOVERED;
+ res = sas_ex_join_wide_port(dev, i);
+ if (!res)
+ SAS_DPRINTK("Attaching ex phy%d to wide port %016llx\n",
+ i, SAS_ADDR(ex->ex_phy[i].attached_sas_addr));
+
+ }
}
+ res = 0;
}
return res;
@@ -1598,7 +1609,7 @@ static int sas_get_phy_attached_sas_addr(struct domain_device *dev,
}
static int sas_find_bcast_phy(struct domain_device *dev, int *phy_id,
- int from_phy)
+ int from_phy, bool update)
{
struct expander_device *ex = &dev->ex_dev;
int res = 0;
@@ -1611,7 +1622,9 @@ static int sas_find_bcast_phy(struct domain_device *dev, int *phy_id,
if (res)
goto out;
else if (phy_change_count != ex->ex_phy[i].phy_change_count) {
- ex->ex_phy[i].phy_change_count = phy_change_count;
+ if (update)
+ ex->ex_phy[i].phy_change_count =
+ phy_change_count;
*phy_id = i;
return 0;
}
@@ -1653,31 +1666,52 @@ out:
kfree(rg_req);
return res;
}
+/**
+ * sas_find_bcast_dev - find the device issue BROADCAST(CHANGE).
+ * @dev:domain device to be detect.
+ * @src_dev: the device which originated BROADCAST(CHANGE).
+ *
+ * Add self-configuration expander suport. Suppose two expander cascading,
+ * when the first level expander is self-configuring, hotplug the disks in
+ * second level expander, BROADCAST(CHANGE) will not only be originated
+ * in the second level expander, but also be originated in the first level
+ * expander (see SAS protocol SAS 2r-14, 7.11 for detail), it is to say,
+ * expander changed count in two level expanders will all increment at least
+ * once, but the phy which chang count has changed is the source device which
+ * we concerned.
+ */
static int sas_find_bcast_dev(struct domain_device *dev,
struct domain_device **src_dev)
{
struct expander_device *ex = &dev->ex_dev;
int ex_change_count = -1;
+ int phy_id = -1;
int res;
+ struct domain_device *ch;
res = sas_get_ex_change_count(dev, &ex_change_count);
if (res)
goto out;
- if (ex_change_count != -1 &&
- ex_change_count != ex->ex_change_count) {
- *src_dev = dev;
- ex->ex_change_count = ex_change_count;
- } else {
- struct domain_device *ch;
-
- list_for_each_entry(ch, &ex->children, siblings) {
- if (ch->dev_type == EDGE_DEV ||
- ch->dev_type == FANOUT_DEV) {
- res = sas_find_bcast_dev(ch, src_dev);
- if (src_dev)
- return res;
- }
+ if (ex_change_count != -1 && ex_change_count != ex->ex_change_count) {
+ /* Just detect if this expander phys phy change count changed,
+ * in order to determine if this expander originate BROADCAST,
+ * and do not update phy change count field in our structure.
+ */
+ res = sas_find_bcast_phy(dev, &phy_id, 0, false);
+ if (phy_id != -1) {
+ *src_dev = dev;
+ ex->ex_change_count = ex_change_count;
+ SAS_DPRINTK("Expander phy change count has changed\n");
+ return res;
+ } else
+ SAS_DPRINTK("Expander phys DID NOT change\n");
+ }
+ list_for_each_entry(ch, &ex->children, siblings) {
+ if (ch->dev_type == EDGE_DEV || ch->dev_type == FANOUT_DEV) {
+ res = sas_find_bcast_dev(ch, src_dev);
+ if (src_dev)
+ return res;
}
}
out:
@@ -1700,24 +1734,26 @@ static void sas_unregister_ex_tree(struct domain_device *dev)
}
static void sas_unregister_devs_sas_addr(struct domain_device *parent,
- int phy_id)
+ int phy_id, bool last)
{
struct expander_device *ex_dev = &parent->ex_dev;
struct ex_phy *phy = &ex_dev->ex_phy[phy_id];
struct domain_device *child, *n;
-
- list_for_each_entry_safe(child, n, &ex_dev->children, siblings) {
- if (SAS_ADDR(child->sas_addr) ==
- SAS_ADDR(phy->attached_sas_addr)) {
- if (child->dev_type == EDGE_DEV ||
- child->dev_type == FANOUT_DEV)
- sas_unregister_ex_tree(child);
- else
- sas_unregister_dev(child);
- break;
+ if (last) {
+ list_for_each_entry_safe(child, n,
+ &ex_dev->children, siblings) {
+ if (SAS_ADDR(child->sas_addr) ==
+ SAS_ADDR(phy->attached_sas_addr)) {
+ if (child->dev_type == EDGE_DEV ||
+ child->dev_type == FANOUT_DEV)
+ sas_unregister_ex_tree(child);
+ else
+ sas_unregister_dev(child);
+ break;
+ }
}
+ sas_disable_routing(parent, phy->attached_sas_addr);
}
- sas_disable_routing(parent, phy->attached_sas_addr);
memset(phy->attached_sas_addr, 0, SAS_ADDR_SIZE);
sas_port_delete_phy(phy->port, phy->phy);
if (phy->port->num_phys == 0)
@@ -1770,15 +1806,31 @@ static int sas_discover_new(struct domain_device *dev, int phy_id)
{
struct ex_phy *ex_phy = &dev->ex_dev.ex_phy[phy_id];
struct domain_device *child;
- int res;
+ bool found = false;
+ int res, i;
SAS_DPRINTK("ex %016llx phy%d new device attached\n",
SAS_ADDR(dev->sas_addr), phy_id);
res = sas_ex_phy_discover(dev, phy_id);
if (res)
goto out;
+ /* to support the wide port inserted */
+ for (i = 0; i < dev->ex_dev.num_phys; i++) {
+ struct ex_phy *ex_phy_temp = &dev->ex_dev.ex_phy[i];
+ if (i == phy_id)
+ continue;
+ if (SAS_ADDR(ex_phy_temp->attached_sas_addr) ==
+ SAS_ADDR(ex_phy->attached_sas_addr)) {
+ found = true;
+ break;
+ }
+ }
+ if (found) {
+ sas_ex_join_wide_port(dev, phy_id);
+ return 0;
+ }
res = sas_ex_discover_devices(dev, phy_id);
- if (res)
+ if (!res)
goto out;
list_for_each_entry(child, &dev->ex_dev.children, siblings) {
if (SAS_ADDR(child->sas_addr) ==
@@ -1793,7 +1845,7 @@ out:
return res;
}
-static int sas_rediscover_dev(struct domain_device *dev, int phy_id)
+static int sas_rediscover_dev(struct domain_device *dev, int phy_id, bool last)
{
struct expander_device *ex = &dev->ex_dev;
struct ex_phy *phy = &ex->ex_phy[phy_id];
@@ -1804,11 +1856,11 @@ static int sas_rediscover_dev(struct domain_device *dev, int phy_id)
switch (res) {
case SMP_RESP_NO_PHY:
phy->phy_state = PHY_NOT_PRESENT;
- sas_unregister_devs_sas_addr(dev, phy_id);
+ sas_unregister_devs_sas_addr(dev, phy_id, last);
goto out; break;
case SMP_RESP_PHY_VACANT:
phy->phy_state = PHY_VACANT;
- sas_unregister_devs_sas_addr(dev, phy_id);
+ sas_unregister_devs_sas_addr(dev, phy_id, last);
goto out; break;
case SMP_RESP_FUNC_ACC:
break;
@@ -1816,7 +1868,7 @@ static int sas_rediscover_dev(struct domain_device *dev, int phy_id)
if (SAS_ADDR(attached_sas_addr) == 0) {
phy->phy_state = PHY_EMPTY;
- sas_unregister_devs_sas_addr(dev, phy_id);
+ sas_unregister_devs_sas_addr(dev, phy_id, last);
} else if (SAS_ADDR(attached_sas_addr) ==
SAS_ADDR(phy->attached_sas_addr)) {
SAS_DPRINTK("ex %016llx phy 0x%x broadcast flutter\n",
@@ -1828,12 +1880,27 @@ out:
return res;
}
+/**
+ * sas_rediscover - revalidate the domain.
+ * @dev:domain device to be detect.
+ * @phy_id: the phy id will be detected.
+ *
+ * NOTE: this process _must_ quit (return) as soon as any connection
+ * errors are encountered. Connection recovery is done elsewhere.
+ * Discover process only interrogates devices in order to discover the
+ * domain.For plugging out, we un-register the device only when it is
+ * the last phy in the port, for other phys in this port, we just delete it
+ * from the port.For inserting, we do discovery when it is the
+ * first phy,for other phys in this port, we add it to the port to
+ * forming the wide-port.
+ */
static int sas_rediscover(struct domain_device *dev, const int phy_id)
{
struct expander_device *ex = &dev->ex_dev;
struct ex_phy *changed_phy = &ex->ex_phy[phy_id];
int res = 0;
int i;
+ bool last = true; /* is this the last phy of the port */
SAS_DPRINTK("ex %016llx phy%d originated BROADCAST(CHANGE)\n",
SAS_ADDR(dev->sas_addr), phy_id);
@@ -1848,13 +1915,13 @@ static int sas_rediscover(struct domain_device *dev, const int phy_id)
SAS_ADDR(changed_phy->attached_sas_addr)) {
SAS_DPRINTK("phy%d part of wide port with "
"phy%d\n", phy_id, i);
- goto out;
+ last = false;
+ break;
}
}
- res = sas_rediscover_dev(dev, phy_id);
+ res = sas_rediscover_dev(dev, phy_id, last);
} else
res = sas_discover_new(dev, phy_id);
-out:
return res;
}
@@ -1881,7 +1948,7 @@ int sas_ex_revalidate_domain(struct domain_device *port_dev)
do {
phy_id = -1;
- res = sas_find_bcast_phy(dev, &phy_id, i);
+ res = sas_find_bcast_phy(dev, &phy_id, i, true);
if (phy_id == -1)
break;
res = sas_rediscover(dev, phy_id);
diff --git a/drivers/scsi/libsas/sas_port.c b/drivers/scsi/libsas/sas_port.c
index e6ac59c023f..fe8b74c706d 100644
--- a/drivers/scsi/libsas/sas_port.c
+++ b/drivers/scsi/libsas/sas_port.c
@@ -56,7 +56,7 @@ static void sas_form_port(struct asd_sas_phy *phy)
}
}
- /* find a port */
+ /* see if the phy should be part of a wide port */
spin_lock_irqsave(&sas_ha->phy_port_lock, flags);
for (i = 0; i < sas_ha->num_phys; i++) {
port = sas_ha->sas_port[i];
@@ -69,12 +69,23 @@ static void sas_form_port(struct asd_sas_phy *phy)
SAS_DPRINTK("phy%d matched wide port%d\n", phy->id,
port->id);
break;
- } else if (*(u64 *) port->sas_addr == 0 && port->num_phys==0) {
- memcpy(port->sas_addr, phy->sas_addr, SAS_ADDR_SIZE);
- break;
}
spin_unlock(&port->phy_list_lock);
}
+ /* The phy does not match any existing port, create a new one */
+ if (i == sas_ha->num_phys) {
+ for (i = 0; i < sas_ha->num_phys; i++) {
+ port = sas_ha->sas_port[i];
+ spin_lock(&port->phy_list_lock);
+ if (*(u64 *)port->sas_addr == 0
+ && port->num_phys == 0) {
+ memcpy(port->sas_addr, phy->sas_addr,
+ SAS_ADDR_SIZE);
+ break;
+ }
+ spin_unlock(&port->phy_list_lock);
+ }
+ }
if (i >= sas_ha->num_phys) {
printk(KERN_NOTICE "%s: couldn't find a free port, bug?\n",
diff --git a/drivers/scsi/qla4xxx/ql4_dbg.c b/drivers/scsi/qla4xxx/ql4_dbg.c
index fcc184cd066..cbceb0ebabf 100644
--- a/drivers/scsi/qla4xxx/ql4_dbg.c
+++ b/drivers/scsi/qla4xxx/ql4_dbg.c
@@ -15,19 +15,18 @@ void qla4xxx_dump_buffer(void *b, uint32_t size)
uint32_t cnt;
uint8_t *c = b;
- printk(" 0 1 2 3 4 5 6 7 8 9 Ah Bh Ch Dh Eh "
+ printk(" 0 1 2 3 4 5 6 7 8 9 Ah Bh Ch Dh Eh "
"Fh\n");
printk("------------------------------------------------------------"
"--\n");
- for (cnt = 0; cnt < size; cnt++, c++) {
- printk(KERN_DEBUG "%02x", *c);
- if (!(cnt % 16))
- printk(KERN_DEBUG "\n");
+ for (cnt = 0; cnt < size; c++) {
+ printk(KERN_INFO "%02x", *c);
+ if (!(++cnt % 16))
+ printk(KERN_INFO "\n");
else
- printk(KERN_DEBUG " ");
+ printk(KERN_INFO " ");
}
- if (cnt % 16)
- printk(KERN_DEBUG "\n");
+ printk(KERN_INFO "\n");
}
diff --git a/drivers/scsi/qla4xxx/ql4_def.h b/drivers/scsi/qla4xxx/ql4_def.h
index b586f27c3bd..81b5f29254e 100644
--- a/drivers/scsi/qla4xxx/ql4_def.h
+++ b/drivers/scsi/qla4xxx/ql4_def.h
@@ -100,7 +100,6 @@
#define MAX_SRBS MAX_CMDS_TO_RISC
#define MBOX_AEN_REG_COUNT 5
#define MAX_INIT_RETRIES 5
-#define IOCB_HIWAT_CUSHION 16
/*
* Buffer sizes
@@ -184,6 +183,11 @@ struct srb {
uint16_t cc_stat;
u_long r_start; /* Time we recieve a cmd from OS */
u_long u_start; /* Time when we handed the cmd to F/W */
+
+ /* Used for extended sense / status continuation */
+ uint8_t *req_sense_ptr;
+ uint16_t req_sense_len;
+ uint16_t reserved2;
};
/*
@@ -302,7 +306,6 @@ struct scsi_qla_host {
uint32_t tot_ddbs;
uint16_t iocb_cnt;
- uint16_t iocb_hiwat;
/* SRB cache. */
#define SRB_MIN_REQ 128
@@ -436,6 +439,8 @@ struct scsi_qla_host {
/* Map ddb_list entry by FW ddb index */
struct ddb_entry *fw_ddb_index_map[MAX_DDB_ENTRIES];
+ /* Saved srb for status continuation entry processing */
+ struct srb *status_srb;
};
static inline int is_qla4010(struct scsi_qla_host *ha)
diff --git a/drivers/scsi/qla4xxx/ql4_fw.h b/drivers/scsi/qla4xxx/ql4_fw.h
index 1b667a70cff..9cd7a608df3 100644
--- a/drivers/scsi/qla4xxx/ql4_fw.h
+++ b/drivers/scsi/qla4xxx/ql4_fw.h
@@ -572,6 +572,7 @@ struct conn_event_log_entry {
*************************************************************************/
#define IOCB_MAX_CDB_LEN 16 /* Bytes in a CBD */
#define IOCB_MAX_SENSEDATA_LEN 32 /* Bytes of sense data */
+#define IOCB_MAX_EXT_SENSEDATA_LEN 60 /* Bytes of extended sense data */
/* IOCB header structure */
struct qla4_header {
@@ -733,6 +734,12 @@ struct status_entry {
};
+/* Status Continuation entry */
+struct status_cont_entry {
+ struct qla4_header hdr; /* 00-03 */
+ uint8_t ext_sense_data[IOCB_MAX_EXT_SENSEDATA_LEN]; /* 04-63 */
+};
+
struct passthru0 {
struct qla4_header hdr; /* 00-03 */
uint32_t handle; /* 04-07 */
diff --git a/drivers/scsi/qla4xxx/ql4_iocb.c b/drivers/scsi/qla4xxx/ql4_iocb.c
index 912a67494ad..e0c32159749 100644
--- a/drivers/scsi/qla4xxx/ql4_iocb.c
+++ b/drivers/scsi/qla4xxx/ql4_iocb.c
@@ -10,9 +10,42 @@
#include "ql4_dbg.h"
#include "ql4_inline.h"
-
#include <scsi/scsi_tcq.h>
+static int
+qla4xxx_space_in_req_ring(struct scsi_qla_host *ha, uint16_t req_cnt)
+{
+ uint16_t cnt;
+
+ /* Calculate number of free request entries. */
+ if ((req_cnt + 2) >= ha->req_q_count) {
+ cnt = (uint16_t) le32_to_cpu(ha->shadow_regs->req_q_out);
+ if (ha->request_in < cnt)
+ ha->req_q_count = cnt - ha->request_in;
+ else
+ ha->req_q_count = REQUEST_QUEUE_DEPTH -
+ (ha->request_in - cnt);
+ }
+
+ /* Check if room for request in request ring. */
+ if ((req_cnt + 2) < ha->req_q_count)
+ return 1;
+ else
+ return 0;
+}
+
+static void qla4xxx_advance_req_ring_ptr(struct scsi_qla_host *ha)
+{
+ /* Advance request queue pointer */
+ if (ha->request_in == (REQUEST_QUEUE_DEPTH - 1)) {
+ ha->request_in = 0;
+ ha->request_ptr = ha->request_ring;
+ } else {
+ ha->request_in++;
+ ha->request_ptr++;
+ }
+}
+
/**
* qla4xxx_get_req_pkt - returns a valid entry in request queue.
* @ha: Pointer to host adapter structure.
@@ -26,35 +59,18 @@
static int qla4xxx_get_req_pkt(struct scsi_qla_host *ha,
struct queue_entry **queue_entry)
{
- uint16_t request_in;
- uint8_t status = QLA_SUCCESS;
-
- *queue_entry = ha->request_ptr;
+ uint16_t req_cnt = 1;
- /* get the latest request_in and request_out index */
- request_in = ha->request_in;
- ha->request_out = (uint16_t) le32_to_cpu(ha->shadow_regs->req_q_out);
-
- /* Advance request queue pointer and check for queue full */
- if (request_in == (REQUEST_QUEUE_DEPTH - 1)) {
- request_in = 0;
- ha->request_ptr = ha->request_ring;
- } else {
- request_in++;
- ha->request_ptr++;
- }
-
- /* request queue is full, try again later */
- if ((ha->iocb_cnt + 1) >= ha->iocb_hiwat) {
- /* restore request pointer */
- ha->request_ptr = *queue_entry;
- status = QLA_ERROR;
- } else {
- ha->request_in = request_in;
+ if (qla4xxx_space_in_req_ring(ha, req_cnt)) {
+ *queue_entry = ha->request_ptr;
memset(*queue_entry, 0, sizeof(**queue_entry));
+
+ qla4xxx_advance_req_ring_ptr(ha);
+ ha->req_q_count -= req_cnt;
+ return QLA_SUCCESS;
}
- return status;
+ return QLA_ERROR;
}
/**
@@ -100,21 +116,14 @@ exit_send_marker:
return status;
}
-static struct continuation_t1_entry* qla4xxx_alloc_cont_entry(
- struct scsi_qla_host *ha)
+static struct continuation_t1_entry *
+qla4xxx_alloc_cont_entry(struct scsi_qla_host *ha)
{
struct continuation_t1_entry *cont_entry;
cont_entry = (struct continuation_t1_entry *)ha->request_ptr;
- /* Advance request queue pointer */
- if (ha->request_in == (REQUEST_QUEUE_DEPTH - 1)) {
- ha->request_in = 0;
- ha->request_ptr = ha->request_ring;
- } else {
- ha->request_in++;
- ha->request_ptr++;
- }
+ qla4xxx_advance_req_ring_ptr(ha);
/* Load packet defaults */
cont_entry->hdr.entryType = ET_CONTINUE;
@@ -197,13 +206,10 @@ int qla4xxx_send_command_to_isp(struct scsi_qla_host *ha, struct srb * srb)
struct scsi_cmnd *cmd = srb->cmd;
struct ddb_entry *ddb_entry;
struct command_t3_entry *cmd_entry;
-
int nseg;
uint16_t tot_dsds;
uint16_t req_cnt;
-
unsigned long flags;
- uint16_t cnt;
uint32_t index;
char tag[2];
@@ -217,6 +223,19 @@ int qla4xxx_send_command_to_isp(struct scsi_qla_host *ha, struct srb * srb)
index = (uint32_t)cmd->request->tag;
+ /*
+ * Check to see if adapter is online before placing request on
+ * request queue. If a reset occurs and a request is in the queue,
+ * the firmware will still attempt to process the request, retrieving
+ * garbage for pointers.
+ */
+ if (!test_bit(AF_ONLINE, &ha->flags)) {
+ DEBUG2(printk("scsi%ld: %s: Adapter OFFLINE! "
+ "Do not issue command.\n",
+ ha->host_no, __func__));
+ goto queuing_error;
+ }
+
/* Calculate the number of request entries needed. */
nseg = scsi_dma_map(cmd);
if (nseg < 0)
@@ -224,17 +243,7 @@ int qla4xxx_send_command_to_isp(struct scsi_qla_host *ha, struct srb * srb)
tot_dsds = nseg;
req_cnt = qla4xxx_calc_request_entries(tot_dsds);
-
- if (ha->req_q_count < (req_cnt + 2)) {
- cnt = (uint16_t) le32_to_cpu(ha->shadow_regs->req_q_out);
- if (ha->request_in < cnt)
- ha->req_q_count = cnt - ha->request_in;
- else
- ha->req_q_count = REQUEST_QUEUE_DEPTH -
- (ha->request_in - cnt);
- }
-
- if (ha->req_q_count < (req_cnt + 2))
+ if (!qla4xxx_space_in_req_ring(ha, req_cnt))
goto queuing_error;
/* total iocbs active */
@@ -286,32 +295,10 @@ int qla4xxx_send_command_to_isp(struct scsi_qla_host *ha, struct srb * srb)
break;
}
-
- /* Advance request queue pointer */
- ha->request_in++;
- if (ha->request_in == REQUEST_QUEUE_DEPTH) {
- ha->request_in = 0;
- ha->request_ptr = ha->request_ring;
- } else
- ha->request_ptr++;
-
-
+ qla4xxx_advance_req_ring_ptr(ha);
qla4xxx_build_scsi_iocbs(srb, cmd_entry, tot_dsds);
wmb();
- /*
- * Check to see if adapter is online before placing request on
- * request queue. If a reset occurs and a request is in the queue,
- * the firmware will still attempt to process the request, retrieving
- * garbage for pointers.
- */
- if (!test_bit(AF_ONLINE, &ha->flags)) {
- DEBUG2(printk("scsi%ld: %s: Adapter OFFLINE! "
- "Do not issue command.\n",
- ha->host_no, __func__));
- goto queuing_error;
- }
-
srb->cmd->host_scribble = (unsigned char *)srb;
/* update counters */
diff --git a/drivers/scsi/qla4xxx/ql4_isr.c b/drivers/scsi/qla4xxx/ql4_isr.c
index 799120fcb9b..8025ee16588 100644
--- a/drivers/scsi/qla4xxx/ql4_isr.c
+++ b/drivers/scsi/qla4xxx/ql4_isr.c
@@ -11,6 +11,98 @@
#include "ql4_inline.h"
/**
+ * qla4xxx_copy_sense - copy sense data into cmd sense buffer
+ * @ha: Pointer to host adapter structure.
+ * @sts_entry: Pointer to status entry structure.
+ * @srb: Pointer to srb structure.
+ **/
+static void qla4xxx_copy_sense(struct scsi_qla_host *ha,
+ struct status_entry *sts_entry,
+ struct srb *srb)
+{
+ struct scsi_cmnd *cmd = srb->cmd;
+ uint16_t sense_len;
+
+ memset(cmd->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
+ sense_len = le16_to_cpu(sts_entry->senseDataByteCnt);
+ if (sense_len == 0)
+ return;
+
+ /* Save total available sense length,
+ * not to exceed cmd's sense buffer size */
+ sense_len = min_t(uint16_t, sense_len, SCSI_SENSE_BUFFERSIZE);
+ srb->req_sense_ptr = cmd->sense_buffer;
+ srb->req_sense_len = sense_len;
+
+ /* Copy sense from sts_entry pkt */
+ sense_len = min_t(uint16_t, sense_len, IOCB_MAX_SENSEDATA_LEN);
+ memcpy(cmd->sense_buffer, sts_entry->senseData, sense_len);
+
+ DEBUG2(printk(KERN_INFO "scsi%ld:%d:%d:%d: %s: sense key = %x, "
+ "ASL= %02x, ASC/ASCQ = %02x/%02x\n", ha->host_no,
+ cmd->device->channel, cmd->device->id,
+ cmd->device->lun, __func__,
+ sts_entry->senseData[2] & 0x0f,
+ sts_entry->senseData[7],
+ sts_entry->senseData[12],
+ sts_entry->senseData[13]));
+
+ DEBUG5(qla4xxx_dump_buffer(cmd->sense_buffer, sense_len));
+ srb->flags |= SRB_GOT_SENSE;
+
+ /* Update srb, in case a sts_cont pkt follows */
+ srb->req_sense_ptr += sense_len;
+ srb->req_sense_len -= sense_len;
+ if (srb->req_sense_len != 0)
+ ha->status_srb = srb;
+ else
+ ha->status_srb = NULL;
+}
+
+/**
+ * qla4xxx_status_cont_entry - Process a Status Continuations entry.
+ * @ha: SCSI driver HA context
+ * @sts_cont: Entry pointer
+ *
+ * Extended sense data.
+ */
+static void
+qla4xxx_status_cont_entry(struct scsi_qla_host *ha,
+ struct status_cont_entry *sts_cont)
+{
+ struct srb *srb = ha->status_srb;
+ struct scsi_cmnd *cmd;
+ uint8_t sense_len;
+
+ if (srb == NULL)
+ return;
+
+ cmd = srb->cmd;
+ if (cmd == NULL) {
+ DEBUG2(printk(KERN_INFO "scsi%ld: %s: Cmd already returned "
+ "back to OS srb=%p srb->state:%d\n", ha->host_no,
+ __func__, srb, srb->state));
+ ha->status_srb = NULL;
+ return;
+ }
+
+ /* Copy sense data. */
+ sense_len = min_t(uint16_t, srb->req_sense_len,
+ IOCB_MAX_EXT_SENSEDATA_LEN);
+ memcpy(srb->req_sense_ptr, sts_cont->ext_sense_data, sense_len);
+ DEBUG5(qla4xxx_dump_buffer(srb->req_sense_ptr, sense_len));
+
+ srb->req_sense_ptr += sense_len;
+ srb->req_sense_len -= sense_len;
+
+ /* Place command on done queue. */
+ if (srb->req_sense_len == 0) {
+ qla4xxx_srb_compl(ha, srb);
+ ha->status_srb = NULL;
+ }
+}
+
+/**
* qla4xxx_status_entry - processes status IOCBs
* @ha: Pointer to host adapter structure.
* @sts_entry: Pointer to status entry structure.
@@ -23,7 +115,6 @@ static void qla4xxx_status_entry(struct scsi_qla_host *ha,
struct srb *srb;
struct ddb_entry *ddb_entry;
uint32_t residual;
- uint16_t sensebytecnt;
srb = qla4xxx_del_from_active_array(ha, le32_to_cpu(sts_entry->handle));
if (!srb) {
@@ -92,24 +183,7 @@ static void qla4xxx_status_entry(struct scsi_qla_host *ha,
break;
/* Copy Sense Data into sense buffer. */
- memset(cmd->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
-
- sensebytecnt = le16_to_cpu(sts_entry->senseDataByteCnt);
- if (sensebytecnt == 0)
- break;
-
- memcpy(cmd->sense_buffer, sts_entry->senseData,
- min_t(uint16_t, sensebytecnt, SCSI_SENSE_BUFFERSIZE));
-
- DEBUG2(printk("scsi%ld:%d:%d:%d: %s: sense key = %x, "
- "ASC/ASCQ = %02x/%02x\n", ha->host_no,
- cmd->device->channel, cmd->device->id,
- cmd->device->lun, __func__,
- sts_entry->senseData[2] & 0x0f,
- sts_entry->senseData[12],
- sts_entry->senseData[13]));
-
- srb->flags |= SRB_GOT_SENSE;
+ qla4xxx_copy_sense(ha, sts_entry, srb);
break;
case SCS_INCOMPLETE:
@@ -176,23 +250,7 @@ static void qla4xxx_status_entry(struct scsi_qla_host *ha,
break;
/* Copy Sense Data into sense buffer. */
- memset(cmd->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
-
- sensebytecnt =
- le16_to_cpu(sts_entry->senseDataByteCnt);
- if (sensebytecnt == 0)
- break;
-
- memcpy(cmd->sense_buffer, sts_entry->senseData,
- min_t(uint16_t, sensebytecnt, SCSI_SENSE_BUFFERSIZE));
-
- DEBUG2(printk("scsi%ld:%d:%d:%d: %s: sense key = %x, "
- "ASC/ASCQ = %02x/%02x\n", ha->host_no,
- cmd->device->channel, cmd->device->id,
- cmd->device->lun, __func__,
- sts_entry->senseData[2] & 0x0f,
- sts_entry->senseData[12],
- sts_entry->senseData[13]));
+ qla4xxx_copy_sense(ha, sts_entry, srb);
} else {
/*
* If RISC reports underrun and target does not
@@ -268,9 +326,10 @@ static void qla4xxx_status_entry(struct scsi_qla_host *ha,
status_entry_exit:
- /* complete the request */
+ /* complete the request, if not waiting for status_continuation pkt */
srb->cc_stat = sts_entry->completionStatus;
- qla4xxx_srb_compl(ha, srb);
+ if (ha->status_srb == NULL)
+ qla4xxx_srb_compl(ha, srb);
}
/**
@@ -305,10 +364,7 @@ static void qla4xxx_process_response_queue(struct scsi_qla_host * ha)
/* process entry */
switch (sts_entry->hdr.entryType) {
case ET_STATUS:
- /*
- * Common status - Single completion posted in single
- * IOSB.
- */
+ /* Common status */
qla4xxx_status_entry(ha, sts_entry);
break;
@@ -316,9 +372,8 @@ static void qla4xxx_process_response_queue(struct scsi_qla_host * ha)
break;
case ET_STATUS_CONTINUATION:
- /* Just throw away the status continuation entries */
- DEBUG2(printk("scsi%ld: %s: Status Continuation entry "
- "- ignoring\n", ha->host_no, __func__));
+ qla4xxx_status_cont_entry(ha,
+ (struct status_cont_entry *) sts_entry);
break;
case ET_COMMAND:
diff --git a/drivers/scsi/qla4xxx/ql4_mbx.c b/drivers/scsi/qla4xxx/ql4_mbx.c
index 051b0f5e8c8..09d6d4b76f3 100644
--- a/drivers/scsi/qla4xxx/ql4_mbx.c
+++ b/drivers/scsi/qla4xxx/ql4_mbx.c
@@ -385,16 +385,6 @@ int qla4xxx_get_firmware_status(struct scsi_qla_host * ha)
mbox_sts[0]));
return QLA_ERROR;
}
-
- /* High-water mark of IOCBs */
- ha->iocb_hiwat = mbox_sts[2];
- if (ha->iocb_hiwat > IOCB_HIWAT_CUSHION)
- ha->iocb_hiwat -= IOCB_HIWAT_CUSHION;
- else
- dev_info(&ha->pdev->dev, "WARNING!!! You have less than %d "
- "firmware IOCBs available (%d).\n",
- IOCB_HIWAT_CUSHION, ha->iocb_hiwat);
-
return QLA_SUCCESS;
}
diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c
index ec9da6ce848..40e3cafb3a9 100644
--- a/drivers/scsi/qla4xxx/ql4_os.c
+++ b/drivers/scsi/qla4xxx/ql4_os.c
@@ -66,6 +66,7 @@ static int qla4xxx_sess_get_param(struct iscsi_cls_session *sess,
static int qla4xxx_host_get_param(struct Scsi_Host *shost,
enum iscsi_host_param param, char *buf);
static void qla4xxx_recovery_timedout(struct iscsi_cls_session *session);
+static enum blk_eh_timer_return qla4xxx_eh_cmd_timed_out(struct scsi_cmnd *sc);
/*
* SCSI host template entry points
@@ -89,6 +90,7 @@ static struct scsi_host_template qla4xxx_driver_template = {
.eh_device_reset_handler = qla4xxx_eh_device_reset,
.eh_target_reset_handler = qla4xxx_eh_target_reset,
.eh_host_reset_handler = qla4xxx_eh_host_reset,
+ .eh_timed_out = qla4xxx_eh_cmd_timed_out,
.slave_configure = qla4xxx_slave_configure,
.slave_alloc = qla4xxx_slave_alloc,
@@ -124,6 +126,21 @@ static struct iscsi_transport qla4xxx_iscsi_transport = {
static struct scsi_transport_template *qla4xxx_scsi_transport;
+static enum blk_eh_timer_return qla4xxx_eh_cmd_timed_out(struct scsi_cmnd *sc)
+{
+ struct iscsi_cls_session *session;
+ struct ddb_entry *ddb_entry;
+
+ session = starget_to_session(scsi_target(sc->device));
+ ddb_entry = session->dd_data;
+
+ /* if we are not logged in then the LLD is going to clean up the cmd */
+ if (atomic_read(&ddb_entry->state) != DDB_STATE_ONLINE)
+ return BLK_EH_RESET_TIMER;
+ else
+ return BLK_EH_NOT_HANDLED;
+}
+
static void qla4xxx_recovery_timedout(struct iscsi_cls_session *session)
{
struct ddb_entry *ddb_entry = session->dd_data;
@@ -904,18 +921,17 @@ static int qla4xxx_recover_adapter(struct scsi_qla_host *ha,
/* Flush any pending ddb changed AENs */
qla4xxx_process_aen(ha, FLUSH_DDB_CHANGED_AENS);
+ qla4xxx_flush_active_srbs(ha);
+
/* Reset the firmware. If successful, function
* returns with ISP interrupts enabled.
*/
- if (status == QLA_SUCCESS) {
- DEBUG2(printk("scsi%ld: %s - Performing soft reset..\n",
- ha->host_no, __func__));
- qla4xxx_flush_active_srbs(ha);
- if (ql4xxx_lock_drvr_wait(ha) == QLA_SUCCESS)
- status = qla4xxx_soft_reset(ha);
- else
- status = QLA_ERROR;
- }
+ DEBUG2(printk("scsi%ld: %s - Performing soft reset..\n",
+ ha->host_no, __func__));
+ if (ql4xxx_lock_drvr_wait(ha) == QLA_SUCCESS)
+ status = qla4xxx_soft_reset(ha);
+ else
+ status = QLA_ERROR;
/* Flush any pending ddb changed AENs */
qla4xxx_process_aen(ha, FLUSH_DDB_CHANGED_AENS);
@@ -1527,11 +1543,9 @@ static int qla4xxx_eh_device_reset(struct scsi_cmnd *cmd)
{
struct scsi_qla_host *ha = to_qla_host(cmd->device->host);
struct ddb_entry *ddb_entry = cmd->device->hostdata;
- struct srb *sp;
int ret = FAILED, stat;
- sp = (struct srb *) cmd->SCp.ptr;
- if (!sp || !ddb_entry)
+ if (!ddb_entry)
return ret;
dev_info(&ha->pdev->dev,
@@ -1644,7 +1658,7 @@ static int qla4xxx_eh_host_reset(struct scsi_cmnd *cmd)
ha = (struct scsi_qla_host *) cmd->device->host->hostdata;
dev_info(&ha->pdev->dev,
- "scsi(%ld:%d:%d:%d): ADAPTER RESET ISSUED.\n", ha->host_no,
+ "scsi(%ld:%d:%d:%d): HOST RESET ISSUED.\n", ha->host_no,
cmd->device->channel, cmd->device->id, cmd->device->lun);
if (qla4xxx_wait_for_hba_online(ha) != QLA_SUCCESS) {
diff --git a/drivers/scsi/qla4xxx/ql4_version.h b/drivers/scsi/qla4xxx/ql4_version.h
index ab984cb89ce..6980cb279c8 100644
--- a/drivers/scsi/qla4xxx/ql4_version.h
+++ b/drivers/scsi/qla4xxx/ql4_version.h
@@ -5,5 +5,5 @@
* See LICENSE.qla4xxx for copyright and licensing details.
*/
-#define QLA4XXX_DRIVER_VERSION "5.01.00-k8"
+#define QLA4XXX_DRIVER_VERSION "5.01.00-k9"
diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c
index 783e33c65eb..b47240ca4b1 100644
--- a/drivers/scsi/scsi_transport_iscsi.c
+++ b/drivers/scsi/scsi_transport_iscsi.c
@@ -990,7 +990,7 @@ int iscsi_offload_mesg(struct Scsi_Host *shost,
struct iscsi_uevent *ev;
int len = NLMSG_SPACE(sizeof(*ev) + data_size);
- skb = alloc_skb(len, GFP_NOIO);
+ skb = alloc_skb(len, GFP_ATOMIC);
if (!skb) {
printk(KERN_ERR "can not deliver iscsi offload message:OOM\n");
return -ENOMEM;
@@ -1012,7 +1012,7 @@ int iscsi_offload_mesg(struct Scsi_Host *shost,
memcpy((char *)ev + sizeof(*ev), data, data_size);
- return iscsi_multicast_skb(skb, ISCSI_NL_GRP_UIP, GFP_NOIO);
+ return iscsi_multicast_skb(skb, ISCSI_NL_GRP_UIP, GFP_ATOMIC);
}
EXPORT_SYMBOL_GPL(iscsi_offload_mesg);
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 5616cd780ff..b7b9fec67a9 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -1840,6 +1840,18 @@ static void sd_read_block_characteristics(struct scsi_disk *sdkp)
kfree(buffer);
}
+static int sd_try_extended_inquiry(struct scsi_device *sdp)
+{
+ /*
+ * Although VPD inquiries can go to SCSI-2 type devices,
+ * some USB ones crash on receiving them, and the pages
+ * we currently ask for are for SPC-3 and beyond
+ */
+ if (sdp->scsi_level > SCSI_SPC_2)
+ return 1;
+ return 0;
+}
+
/**
* sd_revalidate_disk - called the first time a new disk is seen,
* performs disk spin up, read_capacity, etc.
@@ -1877,8 +1889,12 @@ static int sd_revalidate_disk(struct gendisk *disk)
*/
if (sdkp->media_present) {
sd_read_capacity(sdkp, buffer);
- sd_read_block_limits(sdkp);
- sd_read_block_characteristics(sdkp);
+
+ if (sd_try_extended_inquiry(sdp)) {
+ sd_read_block_limits(sdkp);
+ sd_read_block_characteristics(sdkp);
+ }
+
sd_read_write_protect_flag(sdkp, buffer);
sd_read_cache_type(sdkp, buffer);
sd_read_app_tag_own(sdkp, buffer);
diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm2.c b/drivers/serial/cpm_uart/cpm_uart_cpm2.c
index 141c0a3333a..a9802e76b5f 100644
--- a/drivers/serial/cpm_uart/cpm_uart_cpm2.c
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm2.c
@@ -132,7 +132,7 @@ int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con)
memsz = L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize) +
L1_CACHE_ALIGN(pinfo->tx_nrfifos * pinfo->tx_fifosize);
if (is_con) {
- mem_addr = alloc_bootmem(memsz);
+ mem_addr = kzalloc(memsz, GFP_NOWAIT);
dma_addr = virt_to_bus(mem_addr);
}
else
diff --git a/drivers/serial/s3c2400.c b/drivers/serial/s3c2400.c
index fb00ed5296e..fed1a9a1ffb 100644
--- a/drivers/serial/s3c2400.c
+++ b/drivers/serial/s3c2400.c
@@ -76,7 +76,7 @@ static int s3c2400_serial_probe(struct platform_device *dev)
return s3c24xx_serial_probe(dev, &s3c2400_uart_inf);
}
-static struct platform_driver s3c2400_serial_drv = {
+static struct platform_driver s3c2400_serial_driver = {
.probe = s3c2400_serial_probe,
.remove = __devexit_p(s3c24xx_serial_remove),
.driver = {
@@ -85,16 +85,16 @@ static struct platform_driver s3c2400_serial_drv = {
},
};
-s3c24xx_console_init(&s3c2400_serial_drv, &s3c2400_uart_inf);
+s3c24xx_console_init(&s3c2400_serial_driver, &s3c2400_uart_inf);
static inline int s3c2400_serial_init(void)
{
- return s3c24xx_serial_init(&s3c2400_serial_drv, &s3c2400_uart_inf);
+ return s3c24xx_serial_init(&s3c2400_serial_driver, &s3c2400_uart_inf);
}
static inline void s3c2400_serial_exit(void)
{
- platform_driver_unregister(&s3c2400_serial_drv);
+ platform_driver_unregister(&s3c2400_serial_driver);
}
module_init(s3c2400_serial_init);
diff --git a/drivers/serial/s3c2410.c b/drivers/serial/s3c2410.c
index b5d7cbcba2a..c99f0821cae 100644
--- a/drivers/serial/s3c2410.c
+++ b/drivers/serial/s3c2410.c
@@ -88,7 +88,7 @@ static int s3c2410_serial_probe(struct platform_device *dev)
return s3c24xx_serial_probe(dev, &s3c2410_uart_inf);
}
-static struct platform_driver s3c2410_serial_drv = {
+static struct platform_driver s3c2410_serial_driver = {
.probe = s3c2410_serial_probe,
.remove = __devexit_p(s3c24xx_serial_remove),
.driver = {
@@ -97,16 +97,16 @@ static struct platform_driver s3c2410_serial_drv = {
},
};
-s3c24xx_console_init(&s3c2410_serial_drv, &s3c2410_uart_inf);
+s3c24xx_console_init(&s3c2410_serial_driver, &s3c2410_uart_inf);
static int __init s3c2410_serial_init(void)
{
- return s3c24xx_serial_init(&s3c2410_serial_drv, &s3c2410_uart_inf);
+ return s3c24xx_serial_init(&s3c2410_serial_driver, &s3c2410_uart_inf);
}
static void __exit s3c2410_serial_exit(void)
{
- platform_driver_unregister(&s3c2410_serial_drv);
+ platform_driver_unregister(&s3c2410_serial_driver);
}
module_init(s3c2410_serial_init);
diff --git a/drivers/serial/s3c2412.c b/drivers/serial/s3c2412.c
index 11dcb90bdfe..6e057d8809d 100644
--- a/drivers/serial/s3c2412.c
+++ b/drivers/serial/s3c2412.c
@@ -121,7 +121,7 @@ static int s3c2412_serial_probe(struct platform_device *dev)
return s3c24xx_serial_probe(dev, &s3c2412_uart_inf);
}
-static struct platform_driver s3c2412_serial_drv = {
+static struct platform_driver s3c2412_serial_driver = {
.probe = s3c2412_serial_probe,
.remove = __devexit_p(s3c24xx_serial_remove),
.driver = {
@@ -130,16 +130,16 @@ static struct platform_driver s3c2412_serial_drv = {
},
};
-s3c24xx_console_init(&s3c2412_serial_drv, &s3c2412_uart_inf);
+s3c24xx_console_init(&s3c2412_serial_driver, &s3c2412_uart_inf);
static inline int s3c2412_serial_init(void)
{
- return s3c24xx_serial_init(&s3c2412_serial_drv, &s3c2412_uart_inf);
+ return s3c24xx_serial_init(&s3c2412_serial_driver, &s3c2412_uart_inf);
}
static inline void s3c2412_serial_exit(void)
{
- platform_driver_unregister(&s3c2412_serial_drv);
+ platform_driver_unregister(&s3c2412_serial_driver);
}
module_init(s3c2412_serial_init);
diff --git a/drivers/serial/s3c2440.c b/drivers/serial/s3c2440.c
index 06c5b0cc47a..69ff5d340f0 100644
--- a/drivers/serial/s3c2440.c
+++ b/drivers/serial/s3c2440.c
@@ -151,7 +151,7 @@ static int s3c2440_serial_probe(struct platform_device *dev)
return s3c24xx_serial_probe(dev, &s3c2440_uart_inf);
}
-static struct platform_driver s3c2440_serial_drv = {
+static struct platform_driver s3c2440_serial_driver = {
.probe = s3c2440_serial_probe,
.remove = __devexit_p(s3c24xx_serial_remove),
.driver = {
@@ -160,16 +160,16 @@ static struct platform_driver s3c2440_serial_drv = {
},
};
-s3c24xx_console_init(&s3c2440_serial_drv, &s3c2440_uart_inf);
+s3c24xx_console_init(&s3c2440_serial_driver, &s3c2440_uart_inf);
static int __init s3c2440_serial_init(void)
{
- return s3c24xx_serial_init(&s3c2440_serial_drv, &s3c2440_uart_inf);
+ return s3c24xx_serial_init(&s3c2440_serial_driver, &s3c2440_uart_inf);
}
static void __exit s3c2440_serial_exit(void)
{
- platform_driver_unregister(&s3c2440_serial_drv);
+ platform_driver_unregister(&s3c2440_serial_driver);
}
module_init(s3c2440_serial_init);
diff --git a/drivers/serial/s3c24a0.c b/drivers/serial/s3c24a0.c
index 786a067d62a..26c49e18bdd 100644
--- a/drivers/serial/s3c24a0.c
+++ b/drivers/serial/s3c24a0.c
@@ -92,7 +92,7 @@ static int s3c24a0_serial_probe(struct platform_device *dev)
return s3c24xx_serial_probe(dev, &s3c24a0_uart_inf);
}
-static struct platform_driver s3c24a0_serial_drv = {
+static struct platform_driver s3c24a0_serial_driver = {
.probe = s3c24a0_serial_probe,
.remove = __devexit_p(s3c24xx_serial_remove),
.driver = {
@@ -101,16 +101,16 @@ static struct platform_driver s3c24a0_serial_drv = {
},
};
-s3c24xx_console_init(&s3c24a0_serial_drv, &s3c24a0_uart_inf);
+s3c24xx_console_init(&s3c24a0_serial_driver, &s3c24a0_uart_inf);
static int __init s3c24a0_serial_init(void)
{
- return s3c24xx_serial_init(&s3c24a0_serial_drv, &s3c24a0_uart_inf);
+ return s3c24xx_serial_init(&s3c24a0_serial_driver, &s3c24a0_uart_inf);
}
static void __exit s3c24a0_serial_exit(void)
{
- platform_driver_unregister(&s3c24a0_serial_drv);
+ platform_driver_unregister(&s3c24a0_serial_driver);
}
module_init(s3c24a0_serial_init);
diff --git a/drivers/serial/s3c6400.c b/drivers/serial/s3c6400.c
index 48f1a3781f0..4be92ab5005 100644
--- a/drivers/serial/s3c6400.c
+++ b/drivers/serial/s3c6400.c
@@ -122,7 +122,7 @@ static int s3c6400_serial_probe(struct platform_device *dev)
return s3c24xx_serial_probe(dev, &s3c6400_uart_inf);
}
-static struct platform_driver s3c6400_serial_drv = {
+static struct platform_driver s3c6400_serial_driver = {
.probe = s3c6400_serial_probe,
.remove = __devexit_p(s3c24xx_serial_remove),
.driver = {
@@ -131,16 +131,16 @@ static struct platform_driver s3c6400_serial_drv = {
},
};
-s3c24xx_console_init(&s3c6400_serial_drv, &s3c6400_uart_inf);
+s3c24xx_console_init(&s3c6400_serial_driver, &s3c6400_uart_inf);
static int __init s3c6400_serial_init(void)
{
- return s3c24xx_serial_init(&s3c6400_serial_drv, &s3c6400_uart_inf);
+ return s3c24xx_serial_init(&s3c6400_serial_driver, &s3c6400_uart_inf);
}
static void __exit s3c6400_serial_exit(void)
{
- platform_driver_unregister(&s3c6400_serial_drv);
+ platform_driver_unregister(&s3c6400_serial_driver);
}
module_init(s3c6400_serial_init);
diff --git a/drivers/serial/serial_ks8695.c b/drivers/serial/serial_ks8695.c
index 998e89dc5aa..e0665630e4d 100644
--- a/drivers/serial/serial_ks8695.c
+++ b/drivers/serial/serial_ks8695.c
@@ -549,7 +549,7 @@ static struct uart_port ks8695uart_ports[SERIAL_KS8695_NR] = {
.mapbase = KS8695_UART_VA,
.iotype = SERIAL_IO_MEM,
.irq = KS8695_IRQ_UART_TX,
- .uartclk = CLOCK_TICK_RATE * 16,
+ .uartclk = KS8695_CLOCK_RATE * 16,
.fifosize = 16,
.ops = &ks8695uart_pops,
.flags = ASYNC_BOOT_AUTOCONF,
diff --git a/drivers/staging/b3dfg/Kconfig b/drivers/staging/b3dfg/Kconfig
index 524231047de..9e6573cf97d 100644
--- a/drivers/staging/b3dfg/Kconfig
+++ b/drivers/staging/b3dfg/Kconfig
@@ -1,5 +1,6 @@
config B3DFG
tristate "Brontes 3d Frame Framegrabber"
+ depends on PCI
default n
---help---
This driver provides support for the Brontes 3d Framegrabber
diff --git a/drivers/staging/heci/Kconfig b/drivers/staging/heci/Kconfig
index ae8d588d3a2..c7206f8bcd9 100644
--- a/drivers/staging/heci/Kconfig
+++ b/drivers/staging/heci/Kconfig
@@ -1,5 +1,6 @@
config HECI
tristate "Intel Management Engine Interface (MEI) Support"
+ depends on PCI
---help---
The Intel Management Engine Interface (Intel MEI) driver allows
applications to access the Active Management Technology
diff --git a/drivers/staging/rspiusb/rspiusb.c b/drivers/staging/rspiusb/rspiusb.c
index 2f8155c1968..04e2f92c0f6 100644
--- a/drivers/staging/rspiusb/rspiusb.c
+++ b/drivers/staging/rspiusb/rspiusb.c
@@ -716,6 +716,8 @@ static int MapUserBuffer(struct ioctl_struct *io, struct device_extension *pdx)
pdx->PixelUrb[frameInfo][i]->transfer_flags =
URB_NO_TRANSFER_DMA_MAP | URB_NO_INTERRUPT;
}
+ if (i == 0)
+ return -EINVAL;
/* only interrupt when last URB completes */
pdx->PixelUrb[frameInfo][--i]->transfer_flags &= ~URB_NO_INTERRUPT;
pdx->pendedPixelUrbs[frameInfo] =
diff --git a/drivers/staging/rt2860/rt_linux.h b/drivers/staging/rt2860/rt_linux.h
index 85175c18243..25b53ac3f82 100644
--- a/drivers/staging/rt2860/rt_linux.h
+++ b/drivers/staging/rt2860/rt_linux.h
@@ -43,9 +43,6 @@
#include "rtmp_type.h"
#include <linux/module.h>
#include <linux/kernel.h>
-#if !defined(RT2860) && !defined(RT30xx)
-#include <linux/kthread.h>
-#endif
#include <linux/spinlock.h>
#include <linux/init.h>
@@ -166,9 +163,7 @@ typedef int (*HARD_START_XMIT_FUNC)(struct sk_buff *skb, struct net_device *net_
#ifndef RT30xx
typedef struct pid * THREAD_PID;
-#ifdef RT2860
#define THREAD_PID_INIT_VALUE NULL
-#endif
#define GET_PID(_v) find_get_pid(_v)
#define GET_PID_NUMBER(_v) pid_nr(_v)
#define CHECK_PID_LEGALITY(_pid) if (pid_nr(_pid) >= 0)
@@ -188,12 +183,12 @@ struct os_cookie {
dma_addr_t pAd_pa;
#endif
#ifdef RT2870
- struct usb_device *pUsb_Dev;
+ struct usb_device *pUsb_Dev;
#ifndef RT30xx
- struct task_struct *MLMEThr_task;
- struct task_struct *RTUSBCmdThr_task;
- struct task_struct *TimerQThr_task;
+ THREAD_PID MLMEThr_pid;
+ THREAD_PID RTUSBCmdThr_pid;
+ THREAD_PID TimerQThr_pid;
#endif
#ifdef RT30xx
struct pid *MLMEThr_pid;
diff --git a/drivers/staging/rt2870/2870_main_dev.c b/drivers/staging/rt2870/2870_main_dev.c
index dd01c64fbf6..a4e8696ca39 100644
--- a/drivers/staging/rt2870/2870_main_dev.c
+++ b/drivers/staging/rt2870/2870_main_dev.c
@@ -235,7 +235,7 @@ INT MlmeThread(
DBGPRINT(RT_DEBUG_TRACE,( "<---%s\n",__func__));
#ifndef RT30xx
- pObj->MLMEThr_task = NULL;
+ pObj->MLMEThr_pid = THREAD_PID_INIT_VALUE;
#endif
#ifdef RT30xx
pObj->MLMEThr_pid = NULL;
@@ -348,7 +348,7 @@ INT RTUSBCmdThread(
DBGPRINT(RT_DEBUG_TRACE,( "<---RTUSBCmdThread\n"));
#ifndef RT30xx
- pObj->RTUSBCmdThr_task = NULL;
+ pObj->RTUSBCmdThr_pid = THREAD_PID_INIT_VALUE;
#endif
#ifdef RT30xx
pObj->RTUSBCmdThr_pid = NULL;
@@ -447,7 +447,7 @@ INT TimerQThread(
DBGPRINT(RT_DEBUG_TRACE,( "<---%s\n",__func__));
#ifndef RT30xx
- pObj->TimerQThr_task = NULL;
+ pObj->TimerQThr_pid = THREAD_PID_INIT_VALUE;
#endif
#ifdef RT30xx
pObj->TimerQThr_pid = NULL;
@@ -883,46 +883,69 @@ VOID RT28xxThreadTerminate(
// Terminate Threads
#ifndef RT30xx
- BUG_ON(pObj->TimerQThr_task == NULL);
- CHECK_PID_LEGALITY(task_pid(pObj->TimerQThr_task))
+ CHECK_PID_LEGALITY(pObj->TimerQThr_pid)
{
POS_COOKIE pObj = (POS_COOKIE)pAd->OS_Cookie;
- printk(KERN_DEBUG "Terminate the TimerQThr pid=%d!\n",
- pid_nr(task_pid(pObj->TimerQThr_task)));
+ printk("Terminate the TimerQThr_pid=%d!\n", GET_PID_NUMBER(pObj->TimerQThr_pid));
mb();
pAd->TimerFunc_kill = 1;
mb();
- kthread_stop(pObj->TimerQThr_task);
- pObj->TimerQThr_task = NULL;
+ ret = KILL_THREAD_PID(pObj->TimerQThr_pid, SIGTERM, 1);
+ if (ret)
+ {
+ printk(KERN_WARNING "%s: unable to stop TimerQThread, pid=%d, ret=%d!\n",
+ pAd->net_dev->name, GET_PID_NUMBER(pObj->TimerQThr_pid), ret);
+ }
+ else
+ {
+ wait_for_completion(&pAd->TimerQComplete);
+ pObj->TimerQThr_pid = THREAD_PID_INIT_VALUE;
+ }
}
- BUG_ON(pObj->MLMEThr_task == NULL);
- CHECK_PID_LEGALITY(task_pid(pObj->MLMEThr_task))
+ CHECK_PID_LEGALITY(pObj->MLMEThr_pid)
{
- printk(KERN_DEBUG "Terminate the MLMEThr pid=%d!\n",
- pid_nr(task_pid(pObj->MLMEThr_task)));
+ printk("Terminate the MLMEThr_pid=%d!\n", GET_PID_NUMBER(pObj->MLMEThr_pid));
mb();
pAd->mlme_kill = 1;
//RT28XX_MLME_HANDLER(pAd);
mb();
- kthread_stop(pObj->MLMEThr_task);
- pObj->MLMEThr_task = NULL;
+ ret = KILL_THREAD_PID(pObj->MLMEThr_pid, SIGTERM, 1);
+ if (ret)
+ {
+ printk (KERN_WARNING "%s: unable to Mlme thread, pid=%d, ret=%d!\n",
+ pAd->net_dev->name, GET_PID_NUMBER(pObj->MLMEThr_pid), ret);
+ }
+ else
+ {
+ //wait_for_completion (&pAd->notify);
+ wait_for_completion (&pAd->mlmeComplete);
+ pObj->MLMEThr_pid = THREAD_PID_INIT_VALUE;
+ }
}
- BUG_ON(pObj->RTUSBCmdThr_task == NULL);
- CHECK_PID_LEGALITY(task_pid(pObj->RTUSBCmdThr_task))
+ CHECK_PID_LEGALITY(pObj->RTUSBCmdThr_pid)
{
- printk(KERN_DEBUG "Terminate the RTUSBCmdThr pid=%d!\n",
- pid_nr(task_pid(pObj->RTUSBCmdThr_task)));
+ printk("Terminate the RTUSBCmdThr_pid=%d!\n", GET_PID_NUMBER(pObj->RTUSBCmdThr_pid));
mb();
NdisAcquireSpinLock(&pAd->CmdQLock);
pAd->CmdQ.CmdQState = RT2870_THREAD_STOPED;
NdisReleaseSpinLock(&pAd->CmdQLock);
mb();
//RTUSBCMDUp(pAd);
- kthread_stop(pObj->RTUSBCmdThr_task);
- pObj->RTUSBCmdThr_task = NULL;
+ ret = KILL_THREAD_PID(pObj->RTUSBCmdThr_pid, SIGTERM, 1);
+ if (ret)
+ {
+ printk(KERN_WARNING "%s: unable to RTUSBCmd thread, pid=%d, ret=%d!\n",
+ pAd->net_dev->name, GET_PID_NUMBER(pObj->RTUSBCmdThr_pid), ret);
+ }
+ else
+ {
+ //wait_for_completion (&pAd->notify);
+ wait_for_completion (&pAd->CmdQComplete);
+ pObj->RTUSBCmdThr_pid = THREAD_PID_INIT_VALUE;
+ }
}
#endif
#ifdef RT30xx
@@ -1045,7 +1068,7 @@ BOOLEAN RT28XXChipsetCheck(
dev_p->descriptor.idProduct == rtusb_usb_id[i].idProduct)
{
#ifndef RT30xx
- printk(KERN_DEBUG "rt2870: idVendor = 0x%x, idProduct = 0x%x\n",
+ printk("rt2870: idVendor = 0x%x, idProduct = 0x%x\n",
#endif
#ifdef RT30xx
printk("rt2870: idVendor = 0x%x, idProduct = 0x%x\n",
diff --git a/drivers/staging/rt2870/common/2870_rtmp_init.c b/drivers/staging/rt2870/common/2870_rtmp_init.c
index 0f4c8af97e4..80909e9ab5a 100644
--- a/drivers/staging/rt2870/common/2870_rtmp_init.c
+++ b/drivers/staging/rt2870/common/2870_rtmp_init.c
@@ -700,8 +700,8 @@ NDIS_STATUS AdapterBlockAllocateMemory(
usb_dev = pObj->pUsb_Dev;
#ifndef RT30xx
- pObj->MLMEThr_task = NULL;
- pObj->RTUSBCmdThr_task = NULL;
+ pObj->MLMEThr_pid = THREAD_PID_INIT_VALUE;
+ pObj->RTUSBCmdThr_pid = THREAD_PID_INIT_VALUE;
#endif
#ifdef RT30xx
pObj->MLMEThr_pid = NULL;
@@ -743,7 +743,7 @@ NDIS_STATUS CreateThreads(
PRTMP_ADAPTER pAd = net_dev->ml_priv;
POS_COOKIE pObj = (POS_COOKIE) pAd->OS_Cookie;
#ifndef RT30xx
- struct task_struct *tsk;
+ pid_t pid_number = -1;
#endif
#ifdef RT30xx
pid_t pid_number;
@@ -762,10 +762,10 @@ NDIS_STATUS CreateThreads(
// Creat MLME Thread
#ifndef RT30xx
- pObj->MLMEThr_task = NULL;
- tsk = kthread_run(MlmeThread, pAd, "%s", pAd->net_dev->name);
-
- if (IS_ERR(tsk)) {
+ pObj->MLMEThr_pid= THREAD_PID_INIT_VALUE;
+ pid_number = kernel_thread(MlmeThread, pAd, CLONE_VM);
+ if (pid_number < 0)
+ {
#endif
#ifdef RT30xx
pObj->MLMEThr_pid = NULL;
@@ -778,7 +778,7 @@ NDIS_STATUS CreateThreads(
}
#ifndef RT30xx
- pObj->MLMEThr_task = tsk;
+ pObj->MLMEThr_pid = GET_PID(pid_number);
#endif
#ifdef RT30xx
pObj->MLMEThr_pid = find_get_pid(pid_number);
@@ -788,10 +788,9 @@ NDIS_STATUS CreateThreads(
// Creat Command Thread
#ifndef RT30xx
- pObj->RTUSBCmdThr_task = NULL;
- tsk = kthread_run(RTUSBCmdThread, pAd, "%s", pAd->net_dev->name);
-
- if (IS_ERR(tsk) < 0)
+ pObj->RTUSBCmdThr_pid= THREAD_PID_INIT_VALUE;
+ pid_number = kernel_thread(RTUSBCmdThread, pAd, CLONE_VM);
+ if (pid_number < 0)
#endif
#ifdef RT30xx
pObj->RTUSBCmdThr_pid = NULL;
@@ -804,7 +803,7 @@ NDIS_STATUS CreateThreads(
}
#ifndef RT30xx
- pObj->RTUSBCmdThr_task = tsk;
+ pObj->RTUSBCmdThr_pid = GET_PID(pid_number);
#endif
#ifdef RT30xx
pObj->RTUSBCmdThr_pid = find_get_pid(pid_number);
@@ -812,9 +811,9 @@ NDIS_STATUS CreateThreads(
wait_for_completion(&(pAd->CmdQComplete));
#ifndef RT30xx
- pObj->TimerQThr_task = NULL;
- tsk = kthread_run(TimerQThread, pAd, "%s", pAd->net_dev->name);
- if (IS_ERR(tsk) < 0)
+ pObj->TimerQThr_pid= THREAD_PID_INIT_VALUE;
+ pid_number = kernel_thread(TimerQThread, pAd, CLONE_VM);
+ if (pid_number < 0)
#endif
#ifdef RT30xx
pObj->TimerQThr_pid = NULL;
@@ -826,7 +825,7 @@ NDIS_STATUS CreateThreads(
return NDIS_STATUS_FAILURE;
}
#ifndef RT30xx
- pObj->TimerQThr_task = tsk;
+ pObj->TimerQThr_pid = GET_PID(pid_number);
#endif
#ifdef RT30xx
pObj->TimerQThr_pid = find_get_pid(pid_number);
diff --git a/drivers/staging/rt2870/common/rtusb_io.c b/drivers/staging/rt2870/common/rtusb_io.c
index fd1b0c18f2a..704b5c2d509 100644
--- a/drivers/staging/rt2870/common/rtusb_io.c
+++ b/drivers/staging/rt2870/common/rtusb_io.c
@@ -984,8 +984,7 @@ NDIS_STATUS RTUSBEnqueueCmdFromNdis(
POS_COOKIE pObj = (POS_COOKIE) pAd->OS_Cookie;
#ifndef RT30xx
- BUG_ON(pObj->RTUSBCmdThr_task == NULL);
- CHECK_PID_LEGALITY(task_pid(pObj->RTUSBCmdThr_task))
+ CHECK_PID_LEGALITY(pObj->RTUSBCmdThr_pid)
#endif
#ifdef RT30xx
if (pObj->RTUSBCmdThr_pid < 0)
diff --git a/drivers/staging/rt2870/rt2870.h b/drivers/staging/rt2870/rt2870.h
index 29e3b53e52a..2b8872b2fd9 100644
--- a/drivers/staging/rt2870/rt2870.h
+++ b/drivers/staging/rt2870/rt2870.h
@@ -79,6 +79,7 @@
{ \
{USB_DEVICE(0x148F,0x2770)}, /* Ralink */ \
{USB_DEVICE(0x1737,0x0071)}, /* Linksys WUSB600N */ \
+ {USB_DEVICE(0x1737,0x0070)}, /* Linksys */ \
{USB_DEVICE(0x148F,0x2870)}, /* Ralink */ \
{USB_DEVICE(0x148F,0x3070)}, /* Ralink */ \
{USB_DEVICE(0x0B05,0x1731)}, /* Asus */ \
@@ -93,12 +94,14 @@
{USB_DEVICE(0x14B2,0x3C06)}, /* Conceptronic */ \
{USB_DEVICE(0x14B2,0x3C28)}, /* Conceptronic */ \
{USB_DEVICE(0x2019,0xED06)}, /* Planex Communications, Inc. */ \
+ {USB_DEVICE(0x2019,0xED14)}, /* Planex Communications, Inc. */ \
{USB_DEVICE(0x2019,0xAB25)}, /* Planex Communications, Inc. RT3070 */ \
{USB_DEVICE(0x07D1,0x3C09)}, /* D-Link */ \
{USB_DEVICE(0x07D1,0x3C11)}, /* D-Link */ \
{USB_DEVICE(0x14B2,0x3C07)}, /* AL */ \
{USB_DEVICE(0x14B2,0x3C12)}, /* AL */ \
{USB_DEVICE(0x050D,0x8053)}, /* Belkin */ \
+ {USB_DEVICE(0x050D,0x815C)}, /* Belkin */ \
{USB_DEVICE(0x14B2,0x3C23)}, /* Airlink */ \
{USB_DEVICE(0x14B2,0x3C27)}, /* Airlink */ \
{USB_DEVICE(0x07AA,0x002F)}, /* Corega */ \
@@ -587,16 +590,14 @@ VOID RTUSBBulkRxComplete(purbb_t pUrb, struct pt_regs *pt_regs);
#define RTUSBMlmeUp(pAd) \
{ \
POS_COOKIE pObj = (POS_COOKIE) pAd->OS_Cookie; \
- BUG_ON(pObj->MLMEThr_task == NULL); \
- CHECK_PID_LEGALITY(task_pid(pObj->MLMEThr_task)) \
+ CHECK_PID_LEGALITY(pObj->MLMEThr_pid) \
up(&(pAd->mlme_semaphore)); \
}
#define RTUSBCMDUp(pAd) \
{ \
POS_COOKIE pObj = (POS_COOKIE) pAd->OS_Cookie; \
- BUG_ON(pObj->RTUSBCmdThr_task == NULL); \
- CHECK_PID_LEGALITY(task_pid(pObj->RTUSBCmdThr_task)) \
+ CHECK_PID_LEGALITY(pObj->RTUSBCmdThr_pid) \
up(&(pAd->RTUSBCmd_semaphore)); \
}
#endif
diff --git a/drivers/staging/rtl8192su/ieee80211.h b/drivers/staging/rtl8192su/ieee80211.h
index 0edb09a536f..ea973931803 100644
--- a/drivers/staging/rtl8192su/ieee80211.h
+++ b/drivers/staging/rtl8192su/ieee80211.h
@@ -2645,7 +2645,7 @@ extern int ieee80211_encrypt_fragment(
struct sk_buff *frag,
int hdr_len);
-extern int ieee80211_xmit(struct sk_buff *skb,
+extern int rtl8192_ieee80211_xmit(struct sk_buff *skb,
struct net_device *dev);
extern void ieee80211_txb_free(struct ieee80211_txb *);
diff --git a/drivers/staging/rtl8192su/ieee80211/ieee80211.h b/drivers/staging/rtl8192su/ieee80211/ieee80211.h
index 720bfcbfadc..5e3a2cbed2b 100644
--- a/drivers/staging/rtl8192su/ieee80211/ieee80211.h
+++ b/drivers/staging/rtl8192su/ieee80211/ieee80211.h
@@ -2645,7 +2645,7 @@ extern int ieee80211_encrypt_fragment(
struct sk_buff *frag,
int hdr_len);
-extern int ieee80211_xmit(struct sk_buff *skb,
+extern int rtl8192_ieee80211_xmit(struct sk_buff *skb,
struct net_device *dev);
extern void ieee80211_txb_free(struct ieee80211_txb *);
diff --git a/drivers/staging/rtl8192su/ieee80211/ieee80211_tx.c b/drivers/staging/rtl8192su/ieee80211/ieee80211_tx.c
index 7294572b990..cba12b84be5 100644
--- a/drivers/staging/rtl8192su/ieee80211/ieee80211_tx.c
+++ b/drivers/staging/rtl8192su/ieee80211/ieee80211_tx.c
@@ -618,7 +618,7 @@ void ieee80211_query_seqnum(struct ieee80211_device*ieee, struct sk_buff* skb, u
}
}
-int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev)
+int rtl8192_ieee80211_xmit(struct sk_buff *skb, struct net_device *dev)
{
#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0))
struct ieee80211_device *ieee = netdev_priv(dev);
@@ -943,5 +943,6 @@ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev)
return 1;
}
+EXPORT_SYMBOL(rtl8192_ieee80211_xmit);
EXPORT_SYMBOL(ieee80211_txb_free);
diff --git a/drivers/staging/rtl8192su/r8192U_core.c b/drivers/staging/rtl8192su/r8192U_core.c
index 4ab250743e8..70f81a8f129 100644
--- a/drivers/staging/rtl8192su/r8192U_core.c
+++ b/drivers/staging/rtl8192su/r8192U_core.c
@@ -12142,7 +12142,7 @@ static const struct net_device_ops rtl8192_netdev_ops = {
.ndo_set_mac_address = r8192_set_mac_adr,
.ndo_validate_addr = eth_validate_addr,
.ndo_change_mtu = eth_change_mtu,
- .ndo_start_xmit = ieee80211_xmit,
+ .ndo_start_xmit = rtl8192_ieee80211_xmit,
};
#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index e1f89416ef8..2bfc41ece0e 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -387,7 +387,6 @@ static void acm_rx_tasklet(unsigned long _acm)
struct acm_ru *rcv;
unsigned long flags;
unsigned char throttled;
- struct usb_host_endpoint *ep;
dbg("Entering acm_rx_tasklet");
@@ -463,14 +462,12 @@ urbs:
rcv->buffer = buf;
- ep = (usb_pipein(acm->rx_endpoint) ? acm->dev->ep_in : acm->dev->ep_out)
- [usb_pipeendpoint(acm->rx_endpoint)];
- if (usb_endpoint_xfer_int(&ep->desc))
+ if (acm->is_int_ep)
usb_fill_int_urb(rcv->urb, acm->dev,
acm->rx_endpoint,
buf->base,
acm->readsize,
- acm_read_bulk, rcv, ep->desc.bInterval);
+ acm_read_bulk, rcv, acm->bInterval);
else
usb_fill_bulk_urb(rcv->urb, acm->dev,
acm->rx_endpoint,
@@ -1183,6 +1180,9 @@ made_compressed_probe:
spin_lock_init(&acm->read_lock);
mutex_init(&acm->mutex);
acm->rx_endpoint = usb_rcvbulkpipe(usb_dev, epread->bEndpointAddress);
+ acm->is_int_ep = usb_endpoint_xfer_int(epread);
+ if (acm->is_int_ep)
+ acm->bInterval = epread->bInterval;
tty_port_init(&acm->port);
acm->port.ops = &acm_port_ops;
diff --git a/drivers/usb/class/cdc-acm.h b/drivers/usb/class/cdc-acm.h
index 1602324808b..c4a0ee8ffcc 100644
--- a/drivers/usb/class/cdc-acm.h
+++ b/drivers/usb/class/cdc-acm.h
@@ -126,6 +126,8 @@ struct acm {
unsigned int ctrl_caps; /* control capabilities from the class specific header */
unsigned int susp_count; /* number of suspended interfaces */
int combined_interfaces:1; /* control and data collapsed */
+ int is_int_ep:1; /* interrupt endpoints contrary to spec used */
+ u8 bInterval;
struct acm_wb *delayed_wb; /* write queued for a device about to be woken */
};
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index 38b8bce782d..4247eccf858 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -595,7 +595,7 @@ static int usbdev_open(struct inode *inode, struct file *file)
if (!ps)
goto out;
- ret = -ENOENT;
+ ret = -ENODEV;
/* usbdev device-node */
if (imajor(inode) == USB_DEVICE_MAJOR)
@@ -1321,7 +1321,8 @@ static int get_urb32(struct usbdevfs_urb *kurb,
struct usbdevfs_urb32 __user *uurb)
{
__u32 uptr;
- if (get_user(kurb->type, &uurb->type) ||
+ if (!access_ok(VERIFY_READ, uurb, sizeof(*uurb)) ||
+ __get_user(kurb->type, &uurb->type) ||
__get_user(kurb->endpoint, &uurb->endpoint) ||
__get_user(kurb->status, &uurb->status) ||
__get_user(kurb->flags, &uurb->flags) ||
@@ -1536,8 +1537,9 @@ static int proc_ioctl_compat(struct dev_state *ps, compat_uptr_t arg)
u32 udata;
uioc = compat_ptr((long)arg);
- if (get_user(ctrl.ifno, &uioc->ifno) ||
- get_user(ctrl.ioctl_code, &uioc->ioctl_code) ||
+ if (!access_ok(VERIFY_READ, uioc, sizeof(*uioc)) ||
+ __get_user(ctrl.ifno, &uioc->ifno) ||
+ __get_user(ctrl.ioctl_code, &uioc->ioctl_code) ||
__get_user(udata, &uioc->data))
return -EFAULT;
ctrl.data = compat_ptr(udata);
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 7d03549c333..11c627ce602 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -903,7 +903,8 @@ static int ehci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
/* already started */
break;
case QH_STATE_IDLE:
- WARN_ON(1);
+ /* QH might be waiting for a Clear-TT-Buffer */
+ qh_completions(ehci, qh);
break;
}
break;
diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c
index 9a1384747f3..7673554fa64 100644
--- a/drivers/usb/host/ehci-q.c
+++ b/drivers/usb/host/ehci-q.c
@@ -375,12 +375,11 @@ qh_completions (struct ehci_hcd *ehci, struct ehci_qh *qh)
*/
if ((token & QTD_STS_XACT) &&
QTD_CERR(token) == 0 &&
- --qh->xacterrs > 0 &&
+ ++qh->xacterrs < QH_XACTERR_MAX &&
!urb->unlinked) {
ehci_dbg(ehci,
"detected XactErr len %zu/%zu retry %d\n",
- qtd->length - QTD_LENGTH(token), qtd->length,
- QH_XACTERR_MAX - qh->xacterrs);
+ qtd->length - QTD_LENGTH(token), qtd->length, qh->xacterrs);
/* reset the token in the qtd and the
* qh overlay (which still contains
@@ -494,7 +493,7 @@ halt:
last = qtd;
/* reinit the xacterr counter for the next qtd */
- qh->xacterrs = QH_XACTERR_MAX;
+ qh->xacterrs = 0;
}
/* last urb's completion might still need calling */
@@ -940,7 +939,8 @@ static void qh_link_async (struct ehci_hcd *ehci, struct ehci_qh *qh)
head->qh_next.qh = qh;
head->hw_next = dma;
- qh->xacterrs = QH_XACTERR_MAX;
+ qh_get(qh);
+ qh->xacterrs = 0;
qh->qh_state = QH_STATE_LINKED;
/* qtd completions reported later by interrupt */
}
@@ -1080,7 +1080,7 @@ submit_async (
* the HC and TT handle it when the TT has a buffer ready.
*/
if (likely (qh->qh_state == QH_STATE_IDLE))
- qh_link_async (ehci, qh_get (qh));
+ qh_link_async(ehci, qh);
done:
spin_unlock_irqrestore (&ehci->lock, flags);
if (unlikely (qh == NULL))
@@ -1115,8 +1115,6 @@ static void end_unlink_async (struct ehci_hcd *ehci)
&& HC_IS_RUNNING (ehci_to_hcd(ehci)->state))
qh_link_async (ehci, qh);
else {
- qh_put (qh); // refcount from async list
-
/* it's not free to turn the async schedule on/off; leave it
* active but idle for a while once it empties.
*/
@@ -1124,6 +1122,7 @@ static void end_unlink_async (struct ehci_hcd *ehci)
&& ehci->async->qh_next.qh == NULL)
timer_action (ehci, TIMER_ASYNC_OFF);
}
+ qh_put(qh); /* refcount from async list */
if (next) {
ehci->reclaim = NULL;
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index 74f7f83b29a..edd61ee9032 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -542,6 +542,7 @@ static int qh_link_periodic (struct ehci_hcd *ehci, struct ehci_qh *qh)
}
}
qh->qh_state = QH_STATE_LINKED;
+ qh->xacterrs = 0;
qh_get (qh);
/* update per-qh bandwidth for usbfs */
diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index 70073b157f0..803adcb5ac1 100644
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -12,6 +12,7 @@ config USB_MUSB_HDRC
depends on !SUPERH
select NOP_USB_XCEIV if ARCH_DAVINCI
select TWL4030_USB if MACH_OMAP_3430SDP
+ select NOP_USB_XCEIV if MACH_OMAP3EVM
select USB_OTG_UTILS
tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)'
help
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index b574878c78b..8fec5d4455c 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -699,6 +699,9 @@ static struct usb_device_id id_table_combined [] = {
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(LARSENBRUSGAARD_VID, LB_ALTITRACK_PID) },
{ USB_DEVICE(GN_OTOMETRICS_VID, AURICAL_USB_PID) },
+ { USB_DEVICE(BAYER_VID, BAYER_CONTOUR_CABLE_PID) },
+ { USB_DEVICE(FTDI_VID, MARVELL_OPENRD_PID),
+ .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ }, /* Optional parameter entry */
{ } /* Terminating entry */
};
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index 24dbd99e87d..8c92b88166a 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -954,6 +954,20 @@
#define AURICAL_USB_PID 0x0010 /* Aurical USB Audiometer */
/*
+ * Bayer Ascensia Contour blood glucose meter USB-converter cable.
+ * http://winglucofacts.com/cables/
+ */
+#define BAYER_VID 0x1A79
+#define BAYER_CONTOUR_CABLE_PID 0x6001
+
+/*
+ * Marvell OpenRD Base, Client
+ * http://www.open-rd.org
+ * OpenRD Base, Client use VID 0x0403
+ */
+#define MARVELL_OPENRD_PID 0x9e90
+
+/*
* BmRequestType: 1100 0000b
* bRequest: FTDI_E2_READ
* wValue: 0
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 7d15bfa7c2d..3e86815b270 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -95,6 +95,7 @@ static struct usb_device_id id_table [] = {
{ USB_DEVICE(SUPERIAL_VENDOR_ID, SUPERIAL_PRODUCT_ID) },
{ USB_DEVICE(HP_VENDOR_ID, HP_LD220_PRODUCT_ID) },
{ USB_DEVICE(CRESSI_VENDOR_ID, CRESSI_EDY_PRODUCT_ID) },
+ { USB_DEVICE(SONY_VENDOR_ID, SONY_QN3USB_PRODUCT_ID) },
{ } /* Terminating entry */
};
diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
index 12aac7d2462..ee9505e1dd9 100644
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -126,3 +126,7 @@
/* Cressi Edy (diving computer) PC interface */
#define CRESSI_VENDOR_ID 0x04b8
#define CRESSI_EDY_PRODUCT_ID 0x0521
+
+/* Sony, USB data cable for CMD-Jxx mobile phones */
+#define SONY_VENDOR_ID 0x054c
+#define SONY_QN3USB_PRODUCT_ID 0x0437
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 1b9c5dd0fb2..7477d411959 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -838,6 +838,13 @@ UNUSUAL_DEV( 0x066f, 0x8000, 0x0001, 0x0001,
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY ),
+/* Reported by Rogerio Brito <rbrito@ime.usp.br> */
+UNUSUAL_DEV( 0x067b, 0x2317, 0x0001, 0x001,
+ "Prolific Technology, Inc.",
+ "Mass Storage Device",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_NOT_LOCKABLE ),
+
/* Reported by Richard -=[]=- <micro_flyer@hotmail.com> */
/* Change to bcdDeviceMin (0x0100 to 0x0001) reported by
* Thomas Bartosik <tbartdev@gmx-topmail.de> */
diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c
index 471a9a60376..3a44695b9c0 100644
--- a/drivers/video/console/fbcon.c
+++ b/drivers/video/console/fbcon.c
@@ -1082,7 +1082,6 @@ static void fbcon_init(struct vc_data *vc, int init)
new_rows = FBCON_SWAP(ops->rotate, info->var.yres, info->var.xres);
new_cols /= vc->vc_font.width;
new_rows /= vc->vc_font.height;
- vc_resize(vc, new_cols, new_rows);
/*
* We must always set the mode. The mode of the previous console
@@ -1111,10 +1110,11 @@ static void fbcon_init(struct vc_data *vc, int init)
* vc_{cols,rows}, but we must not set those if we are only
* resizing the console.
*/
- if (!init) {
+ if (init) {
vc->vc_cols = new_cols;
vc->vc_rows = new_rows;
- }
+ } else
+ vc_resize(vc, new_cols, new_rows);
if (logo)
fbcon_prepare_logo(vc, info, cols, rows, new_cols, new_rows);
diff --git a/drivers/video/console/fbcon_rotate.h b/drivers/video/console/fbcon_rotate.h
index 75be5ce53dc..e233444cda6 100644
--- a/drivers/video/console/fbcon_rotate.h
+++ b/drivers/video/console/fbcon_rotate.h
@@ -45,7 +45,7 @@ static inline void rotate_ud(const char *in, char *out, u32 width, u32 height)
width = (width + 7) & ~7;
for (i = 0; i < height; i++) {
- for (j = 0; j < width; j++) {
+ for (j = 0; j < width - shift; j++) {
if (pattern_test_bit(j, i, width, in))
pattern_set_bit(width - (1 + j + shift),
height - (1 + i),
diff --git a/drivers/video/console/sticore.c b/drivers/video/console/sticore.c
index ef7870f5ea0..857b3668b3b 100644
--- a/drivers/video/console/sticore.c
+++ b/drivers/video/console/sticore.c
@@ -957,9 +957,14 @@ static int __devinit sticore_pci_init(struct pci_dev *pd,
#ifdef CONFIG_PCI
unsigned long fb_base, rom_base;
unsigned int fb_len, rom_len;
+ int err;
struct sti_struct *sti;
- pci_enable_device(pd);
+ err = pci_enable_device(pd);
+ if (err < 0) {
+ dev_err(&pd->dev, "Cannot enable PCI device\n");
+ return err;
+ }
fb_base = pci_resource_start(pd, 0);
fb_len = pci_resource_len(pd, 0);
@@ -1048,7 +1053,7 @@ static void __devinit sti_init_roms(void)
/* Register drivers for native & PCI cards */
register_parisc_driver(&pa_sti_driver);
- pci_register_driver(&pci_sti_driver);
+ WARN_ON(pci_register_driver(&pci_sti_driver));
/* if we didn't find the given default sti, take the first one */
if (!default_sti)
diff --git a/drivers/video/mx3fb.c b/drivers/video/mx3fb.c
index f8778cde218..054ef29be47 100644
--- a/drivers/video/mx3fb.c
+++ b/drivers/video/mx3fb.c
@@ -669,7 +669,8 @@ static uint32_t bpp_to_pixfmt(int bpp)
}
static int mx3fb_blank(int blank, struct fb_info *fbi);
-static int mx3fb_map_video_memory(struct fb_info *fbi, unsigned int mem_len);
+static int mx3fb_map_video_memory(struct fb_info *fbi, unsigned int mem_len,
+ bool lock);
static int mx3fb_unmap_video_memory(struct fb_info *fbi);
/**
@@ -711,12 +712,7 @@ static void mx3fb_dma_done(void *arg)
complete(&mx3_fbi->flip_cmpl);
}
-/**
- * mx3fb_set_par() - set framebuffer parameters and change the operating mode.
- * @fbi: framebuffer information pointer.
- * @return: 0 on success or negative error code on failure.
- */
-static int mx3fb_set_par(struct fb_info *fbi)
+static int __set_par(struct fb_info *fbi, bool lock)
{
u32 mem_len;
struct ipu_di_signal_cfg sig_cfg;
@@ -727,10 +723,6 @@ static int mx3fb_set_par(struct fb_info *fbi)
struct idmac_video_param *video = &ichan->params.video;
struct scatterlist *sg = mx3_fbi->sg;
- dev_dbg(mx3fb->dev, "%s [%c]\n", __func__, list_empty(&ichan->queue) ? '-' : '+');
-
- mutex_lock(&mx3_fbi->mutex);
-
/* Total cleanup */
if (mx3_fbi->txd)
sdc_disable_channel(mx3_fbi);
@@ -742,10 +734,8 @@ static int mx3fb_set_par(struct fb_info *fbi)
if (fbi->fix.smem_start)
mx3fb_unmap_video_memory(fbi);
- if (mx3fb_map_video_memory(fbi, mem_len) < 0) {
- mutex_unlock(&mx3_fbi->mutex);
+ if (mx3fb_map_video_memory(fbi, mem_len, lock) < 0)
return -ENOMEM;
- }
}
sg_init_table(&sg[0], 1);
@@ -791,7 +781,6 @@ static int mx3fb_set_par(struct fb_info *fbi)
fbi->var.vsync_len,
fbi->var.lower_margin +
fbi->var.vsync_len, sig_cfg) != 0) {
- mutex_unlock(&mx3_fbi->mutex);
dev_err(fbi->device,
"mx3fb: Error initializing panel.\n");
return -EINVAL;
@@ -810,9 +799,30 @@ static int mx3fb_set_par(struct fb_info *fbi)
if (mx3_fbi->blank == FB_BLANK_UNBLANK)
sdc_enable_channel(mx3_fbi);
+ return 0;
+}
+
+/**
+ * mx3fb_set_par() - set framebuffer parameters and change the operating mode.
+ * @fbi: framebuffer information pointer.
+ * @return: 0 on success or negative error code on failure.
+ */
+static int mx3fb_set_par(struct fb_info *fbi)
+{
+ struct mx3fb_info *mx3_fbi = fbi->par;
+ struct mx3fb_data *mx3fb = mx3_fbi->mx3fb;
+ struct idmac_channel *ichan = mx3_fbi->idmac_channel;
+ int ret;
+
+ dev_dbg(mx3fb->dev, "%s [%c]\n", __func__, list_empty(&ichan->queue) ? '-' : '+');
+
+ mutex_lock(&mx3_fbi->mutex);
+
+ ret = __set_par(fbi, true);
+
mutex_unlock(&mx3_fbi->mutex);
- return 0;
+ return ret;
}
/**
@@ -966,21 +976,11 @@ static int mx3fb_setcolreg(unsigned int regno, unsigned int red,
return ret;
}
-/**
- * mx3fb_blank() - blank the display.
- */
-static int mx3fb_blank(int blank, struct fb_info *fbi)
+static void __blank(int blank, struct fb_info *fbi)
{
struct mx3fb_info *mx3_fbi = fbi->par;
struct mx3fb_data *mx3fb = mx3_fbi->mx3fb;
- dev_dbg(fbi->device, "%s, blank = %d, base %p, len %u\n", __func__,
- blank, fbi->screen_base, fbi->fix.smem_len);
-
- if (mx3_fbi->blank == blank)
- return 0;
-
- mutex_lock(&mx3_fbi->mutex);
mx3_fbi->blank = blank;
switch (blank) {
@@ -999,6 +999,23 @@ static int mx3fb_blank(int blank, struct fb_info *fbi)
sdc_set_brightness(mx3fb, mx3fb->backlight_level);
break;
}
+}
+
+/**
+ * mx3fb_blank() - blank the display.
+ */
+static int mx3fb_blank(int blank, struct fb_info *fbi)
+{
+ struct mx3fb_info *mx3_fbi = fbi->par;
+
+ dev_dbg(fbi->device, "%s, blank = %d, base %p, len %u\n", __func__,
+ blank, fbi->screen_base, fbi->fix.smem_len);
+
+ if (mx3_fbi->blank == blank)
+ return 0;
+
+ mutex_lock(&mx3_fbi->mutex);
+ __blank(blank, fbi);
mutex_unlock(&mx3_fbi->mutex);
return 0;
@@ -1198,6 +1215,7 @@ static int mx3fb_resume(struct platform_device *pdev)
* mx3fb_map_video_memory() - allocates the DRAM memory for the frame buffer.
* @fbi: framebuffer information pointer
* @mem_len: length of mapped memory
+ * @lock: do not lock during initialisation
* @return: Error code indicating success or failure
*
* This buffer is remapped into a non-cached, non-buffered, memory region to
@@ -1205,7 +1223,8 @@ static int mx3fb_resume(struct platform_device *pdev)
* area is remapped, all virtual memory access to the video memory should occur
* at the new region.
*/
-static int mx3fb_map_video_memory(struct fb_info *fbi, unsigned int mem_len)
+static int mx3fb_map_video_memory(struct fb_info *fbi, unsigned int mem_len,
+ bool lock)
{
int retval = 0;
dma_addr_t addr;
@@ -1221,10 +1240,12 @@ static int mx3fb_map_video_memory(struct fb_info *fbi, unsigned int mem_len)
goto err0;
}
- mutex_lock(&fbi->mm_lock);
+ if (lock)
+ mutex_lock(&fbi->mm_lock);
fbi->fix.smem_start = addr;
fbi->fix.smem_len = mem_len;
- mutex_unlock(&fbi->mm_lock);
+ if (lock)
+ mutex_unlock(&fbi->mm_lock);
dev_dbg(fbi->device, "allocated fb @ p=0x%08x, v=0x%p, size=%d.\n",
(uint32_t) fbi->fix.smem_start, fbi->screen_base, fbi->fix.smem_len);
@@ -1365,6 +1386,11 @@ static int init_fb_chan(struct mx3fb_data *mx3fb, struct idmac_channel *ichan)
init_completion(&mx3fbi->flip_cmpl);
disable_irq(ichan->eof_irq);
dev_dbg(mx3fb->dev, "disabling irq %d\n", ichan->eof_irq);
+ ret = __set_par(fbi, false);
+ if (ret < 0)
+ goto esetpar;
+
+ __blank(FB_BLANK_UNBLANK, fbi);
dev_info(dev, "registered, using mode %s\n", fb_mode);
diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c
index 98fb82f1161..fc3f9662cea 100644
--- a/drivers/video/sh_mobile_lcdcfb.c
+++ b/drivers/video/sh_mobile_lcdcfb.c
@@ -154,6 +154,7 @@ static void lcdc_sys_write_index(void *handle, unsigned long data)
lcdc_write(ch->lcdc, _LDDWD0R, data | 0x10000000);
lcdc_wait_bit(ch->lcdc, _LDSR, 2, 0);
lcdc_write(ch->lcdc, _LDDWAR, 1 | (lcdc_chan_is_sublcd(ch) ? 2 : 0));
+ lcdc_wait_bit(ch->lcdc, _LDSR, 2, 0);
}
static void lcdc_sys_write_data(void *handle, unsigned long data)
@@ -163,6 +164,7 @@ static void lcdc_sys_write_data(void *handle, unsigned long data)
lcdc_write(ch->lcdc, _LDDWD0R, data | 0x11000000);
lcdc_wait_bit(ch->lcdc, _LDSR, 2, 0);
lcdc_write(ch->lcdc, _LDDWAR, 1 | (lcdc_chan_is_sublcd(ch) ? 2 : 0));
+ lcdc_wait_bit(ch->lcdc, _LDSR, 2, 0);
}
static unsigned long lcdc_sys_read_data(void *handle)
@@ -173,8 +175,9 @@ static unsigned long lcdc_sys_read_data(void *handle)
lcdc_wait_bit(ch->lcdc, _LDSR, 2, 0);
lcdc_write(ch->lcdc, _LDDRAR, 1 | (lcdc_chan_is_sublcd(ch) ? 2 : 0));
udelay(1);
+ lcdc_wait_bit(ch->lcdc, _LDSR, 2, 0);
- return lcdc_read(ch->lcdc, _LDDRDR) & 0xffff;
+ return lcdc_read(ch->lcdc, _LDDRDR) & 0x3ffff;
}
struct sh_mobile_lcdc_sys_bus_ops sh_mobile_lcdc_sys_bus_ops = {
@@ -474,6 +477,9 @@ static int sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv)
/* tell the board code to enable the panel */
for (k = 0; k < ARRAY_SIZE(priv->ch); k++) {
ch = &priv->ch[k];
+ if (!ch->enabled)
+ continue;
+
board_cfg = &ch->cfg.board_cfg;
if (board_cfg->display_on)
board_cfg->display_on(board_cfg->board_data);
@@ -491,6 +497,8 @@ static void sh_mobile_lcdc_stop(struct sh_mobile_lcdc_priv *priv)
/* clean up deferred io and ask board code to disable panel */
for (k = 0; k < ARRAY_SIZE(priv->ch); k++) {
ch = &priv->ch[k];
+ if (!ch->enabled)
+ continue;
/* deferred io mode:
* flush frame, and wait for frame end interrupt
diff --git a/drivers/video/via/hw.c b/drivers/video/via/hw.c
index fcd53ceb88f..c8960003f47 100644
--- a/drivers/video/via/hw.c
+++ b/drivers/video/via/hw.c
@@ -2407,14 +2407,14 @@ int viafb_setmode(int vmode_index, int hor_res, int ver_res, int video_bpp,
viafb_dvi_set_mode(viafb_get_mode_index
(viaparinfo->tmds_setting_info->h_active,
viaparinfo->tmds_setting_info->
- v_active, 1),
+ v_active),
video_bpp1, viaparinfo->
tmds_setting_info->iga_path);
} else {
viafb_dvi_set_mode(viafb_get_mode_index
(viaparinfo->tmds_setting_info->h_active,
viaparinfo->
- tmds_setting_info->v_active, 0),
+ tmds_setting_info->v_active),
video_bpp, viaparinfo->
tmds_setting_info->iga_path);
}
diff --git a/drivers/video/via/lcd.c b/drivers/video/via/lcd.c
index 6c7290a6a44..78c6b338794 100644
--- a/drivers/video/via/lcd.c
+++ b/drivers/video/via/lcd.c
@@ -580,10 +580,7 @@ static void load_lcd_k400_patch_tbl(int set_hres, int set_vres,
int reg_num = 0;
struct io_reg *lcd_patch_reg = NULL;
- if (viaparinfo->lvds_setting_info->iga_path == IGA2)
- vmode_index = viafb_get_mode_index(set_hres, set_vres, 1);
- else
- vmode_index = viafb_get_mode_index(set_hres, set_vres, 0);
+ vmode_index = viafb_get_mode_index(set_hres, set_vres);
switch (panel_id) {
/* LCD 800x600 */
case LCD_PANEL_ID1_800X600:
@@ -761,10 +758,7 @@ static void load_lcd_p880_patch_tbl(int set_hres, int set_vres,
int reg_num = 0;
struct io_reg *lcd_patch_reg = NULL;
- if (viaparinfo->lvds_setting_info->iga_path == IGA2)
- vmode_index = viafb_get_mode_index(set_hres, set_vres, 1);
- else
- vmode_index = viafb_get_mode_index(set_hres, set_vres, 0);
+ vmode_index = viafb_get_mode_index(set_hres, set_vres);
switch (panel_id) {
case LCD_PANEL_ID5_1400X1050:
@@ -832,10 +826,7 @@ static void load_lcd_patch_regs(int set_hres, int set_vres,
{
int vmode_index;
- if (viaparinfo->lvds_setting_info->iga_path == IGA2)
- vmode_index = viafb_get_mode_index(set_hres, set_vres, 1);
- else
- vmode_index = viafb_get_mode_index(set_hres, set_vres, 0);
+ vmode_index = viafb_get_mode_index(set_hres, set_vres);
viafb_unlock_crt();
diff --git a/drivers/video/via/viafbdev.c b/drivers/video/via/viafbdev.c
index a0fec298216..72833f3334b 100644
--- a/drivers/video/via/viafbdev.c
+++ b/drivers/video/via/viafbdev.c
@@ -32,7 +32,6 @@ static u32 pseudo_pal[17];
/* video mode */
static char *viafb_mode = "640x480";
static char *viafb_mode1 = "640x480";
-static int viafb_resMode = VIA_RES_640X480;
/* Added for specifying active devices.*/
char *viafb_active_dev = "";
@@ -56,47 +55,47 @@ static void viafb_get_video_device(u32 *video_dev_info);
/* Mode information */
static const struct viafb_modeinfo viafb_modentry[] = {
- {480, 640, VIA_RES_480X640, "480x640"},
- {640, 480, VIA_RES_640X480, "640x480"},
- {800, 480, VIA_RES_800X480, "800x480"},
- {800, 600, VIA_RES_800X600, "800x600"},
- {1024, 768, VIA_RES_1024X768, "1024x768"},
- {1152, 864, VIA_RES_1152X864, "1152x864"},
- {1280, 1024, VIA_RES_1280X1024, "1280x1024"},
- {1600, 1200, VIA_RES_1600X1200, "1600x1200"},
- {1440, 1050, VIA_RES_1440X1050, "1440x1050"},
- {1280, 768, VIA_RES_1280X768, "1280x768"},
- {1280, 800, VIA_RES_1280X800, "1280x800"},
- {1280, 960, VIA_RES_1280X960, "1280x960"},
- {1920, 1440, VIA_RES_1920X1440, "1920x1440"},
- {848, 480, VIA_RES_848X480, "848x480"},
- {1400, 1050, VIA_RES_1400X1050, "1400x1050"},
- {720, 480, VIA_RES_720X480, "720x480"},
- {720, 576, VIA_RES_720X576, "720x576"},
- {1024, 512, VIA_RES_1024X512, "1024x512"},
- {1024, 576, VIA_RES_1024X576, "1024x576"},
- {1024, 600, VIA_RES_1024X600, "1024x600"},
- {1280, 720, VIA_RES_1280X720, "1280x720"},
- {1920, 1080, VIA_RES_1920X1080, "1920x1080"},
- {1366, 768, VIA_RES_1368X768, "1368x768"},
- {1680, 1050, VIA_RES_1680X1050, "1680x1050"},
- {960, 600, VIA_RES_960X600, "960x600"},
- {1000, 600, VIA_RES_1000X600, "1000x600"},
- {1024, 576, VIA_RES_1024X576, "1024x576"},
- {1024, 600, VIA_RES_1024X600, "1024x600"},
- {1088, 612, VIA_RES_1088X612, "1088x612"},
- {1152, 720, VIA_RES_1152X720, "1152x720"},
- {1200, 720, VIA_RES_1200X720, "1200x720"},
- {1280, 600, VIA_RES_1280X600, "1280x600"},
- {1360, 768, VIA_RES_1360X768, "1360x768"},
- {1440, 900, VIA_RES_1440X900, "1440x900"},
- {1600, 900, VIA_RES_1600X900, "1600x900"},
- {1600, 1024, VIA_RES_1600X1024, "1600x1024"},
- {1792, 1344, VIA_RES_1792X1344, "1792x1344"},
- {1856, 1392, VIA_RES_1856X1392, "1856x1392"},
- {1920, 1200, VIA_RES_1920X1200, "1920x1200"},
- {2048, 1536, VIA_RES_2048X1536, "2048x1536"},
- {0, 0, VIA_RES_INVALID, "640x480"}
+ {480, 640, VIA_RES_480X640},
+ {640, 480, VIA_RES_640X480},
+ {800, 480, VIA_RES_800X480},
+ {800, 600, VIA_RES_800X600},
+ {1024, 768, VIA_RES_1024X768},
+ {1152, 864, VIA_RES_1152X864},
+ {1280, 1024, VIA_RES_1280X1024},
+ {1600, 1200, VIA_RES_1600X1200},
+ {1440, 1050, VIA_RES_1440X1050},
+ {1280, 768, VIA_RES_1280X768,},
+ {1280, 800, VIA_RES_1280X800},
+ {1280, 960, VIA_RES_1280X960},
+ {1920, 1440, VIA_RES_1920X1440},
+ {848, 480, VIA_RES_848X480},
+ {1400, 1050, VIA_RES_1400X1050},
+ {720, 480, VIA_RES_720X480},
+ {720, 576, VIA_RES_720X576},
+ {1024, 512, VIA_RES_1024X512},
+ {1024, 576, VIA_RES_1024X576},
+ {1024, 600, VIA_RES_1024X600},
+ {1280, 720, VIA_RES_1280X720},
+ {1920, 1080, VIA_RES_1920X1080},
+ {1366, 768, VIA_RES_1368X768},
+ {1680, 1050, VIA_RES_1680X1050},
+ {960, 600, VIA_RES_960X600},
+ {1000, 600, VIA_RES_1000X600},
+ {1024, 576, VIA_RES_1024X576},
+ {1024, 600, VIA_RES_1024X600},
+ {1088, 612, VIA_RES_1088X612},
+ {1152, 720, VIA_RES_1152X720},
+ {1200, 720, VIA_RES_1200X720},
+ {1280, 600, VIA_RES_1280X600},
+ {1360, 768, VIA_RES_1360X768},
+ {1440, 900, VIA_RES_1440X900},
+ {1600, 900, VIA_RES_1600X900},
+ {1600, 1024, VIA_RES_1600X1024},
+ {1792, 1344, VIA_RES_1792X1344},
+ {1856, 1392, VIA_RES_1856X1392},
+ {1920, 1200, VIA_RES_1920X1200},
+ {2048, 1536, VIA_RES_2048X1536},
+ {0, 0, VIA_RES_INVALID}
};
static struct fb_ops viafb_ops;
@@ -177,7 +176,7 @@ static int viafb_check_var(struct fb_var_screeninfo *var,
if (var->vmode & FB_VMODE_INTERLACED || var->vmode & FB_VMODE_DOUBLE)
return -EINVAL;
- vmode_index = viafb_get_mode_index(var->xres, var->yres, 0);
+ vmode_index = viafb_get_mode_index(var->xres, var->yres);
if (vmode_index == VIA_RES_INVALID) {
DEBUG_MSG(KERN_INFO
"viafb: Mode %dx%dx%d not supported!!\n",
@@ -233,14 +232,14 @@ static int viafb_set_par(struct fb_info *info)
viafb_update_device_setting(info->var.xres, info->var.yres,
info->var.bits_per_pixel, viafb_refresh, 0);
- vmode_index = viafb_get_mode_index(info->var.xres, info->var.yres, 0);
+ vmode_index = viafb_get_mode_index(info->var.xres, info->var.yres);
if (viafb_SAMM_ON == 1) {
DEBUG_MSG(KERN_INFO
"viafb_second_xres = %d, viafb_second_yres = %d, bpp = %d\n",
viafb_second_xres, viafb_second_yres, viafb_bpp1);
vmode_index1 = viafb_get_mode_index(viafb_second_xres,
- viafb_second_yres, 1);
+ viafb_second_yres);
DEBUG_MSG(KERN_INFO "->viafb_SAMM_ON: index=%d\n",
vmode_index1);
@@ -1262,7 +1261,7 @@ static int viafb_sync(struct fb_info *info)
return 0;
}
-int viafb_get_mode_index(int hres, int vres, int flag)
+int viafb_get_mode_index(int hres, int vres)
{
u32 i;
DEBUG_MSG(KERN_INFO "viafb_get_mode_index!\n");
@@ -1272,13 +1271,7 @@ int viafb_get_mode_index(int hres, int vres, int flag)
viafb_modentry[i].yres == vres)
break;
- viafb_resMode = viafb_modentry[i].mode_index;
- if (flag)
- viafb_mode1 = viafb_modentry[i].mode_res;
- else
- viafb_mode = viafb_modentry[i].mode_res;
-
- return viafb_resMode;
+ return viafb_modentry[i].mode_index;
}
static void check_available_device_to_enable(int device_id)
@@ -2199,7 +2192,7 @@ static int __devinit via_pci_probe(void)
strict_strtoul(tmpc, 0, &default_xres);
strict_strtoul(tmpm, 0, &default_yres);
- vmode_index = viafb_get_mode_index(default_xres, default_yres, 0);
+ vmode_index = viafb_get_mode_index(default_xres, default_yres);
DEBUG_MSG(KERN_INFO "0->index=%d\n", vmode_index);
if (viafb_SAMM_ON == 1) {
diff --git a/drivers/video/via/viafbdev.h b/drivers/video/via/viafbdev.h
index a4158e87287..227b000feb3 100644
--- a/drivers/video/via/viafbdev.h
+++ b/drivers/video/via/viafbdev.h
@@ -81,7 +81,6 @@ struct viafb_modeinfo {
u32 xres;
u32 yres;
int mode_index;
- char *mode_res;
};
extern unsigned int viafb_second_virtual_yres;
extern unsigned int viafb_second_virtual_xres;
@@ -102,7 +101,7 @@ extern int strict_strtoul(const char *cp, unsigned int base,
void viafb_memory_pitch_patch(struct fb_info *info);
void viafb_fill_var_timing_info(struct fb_var_screeninfo *var, int refresh,
int mode_index);
-int viafb_get_mode_index(int hres, int vres, int flag);
+int viafb_get_mode_index(int hres, int vres);
u8 viafb_gpio_i2c_read_lvds(struct lvds_setting_information
*plvds_setting_info, struct lvds_chip_information
*plvds_chip_info, u8 index);
diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c
index bcec78ffc76..248e00ec4dc 100644
--- a/drivers/virtio/virtio_pci.c
+++ b/drivers/virtio/virtio_pci.c
@@ -52,8 +52,10 @@ struct virtio_pci_device
char (*msix_names)[256];
/* Number of available vectors */
unsigned msix_vectors;
- /* Vectors allocated */
+ /* Vectors allocated, excluding per-vq vectors if any */
unsigned msix_used_vectors;
+ /* Whether we have vector per vq */
+ bool per_vq_vectors;
};
/* Constants for MSI-X */
@@ -258,7 +260,6 @@ static void vp_free_vectors(struct virtio_device *vdev)
for (i = 0; i < vp_dev->msix_used_vectors; ++i)
free_irq(vp_dev->msix_entries[i].vector, vp_dev);
- vp_dev->msix_used_vectors = 0;
if (vp_dev->msix_enabled) {
/* Disable the vector used for configuration */
@@ -267,80 +268,77 @@ static void vp_free_vectors(struct virtio_device *vdev)
/* Flush the write out to device */
ioread16(vp_dev->ioaddr + VIRTIO_MSI_CONFIG_VECTOR);
- vp_dev->msix_enabled = 0;
pci_disable_msix(vp_dev->pci_dev);
+ vp_dev->msix_enabled = 0;
+ vp_dev->msix_vectors = 0;
}
-}
-static int vp_enable_msix(struct pci_dev *dev, struct msix_entry *entries,
- int *options, int noptions)
-{
- int i;
- for (i = 0; i < noptions; ++i)
- if (!pci_enable_msix(dev, entries, options[i]))
- return options[i];
- return -EBUSY;
+ vp_dev->msix_used_vectors = 0;
+ kfree(vp_dev->msix_names);
+ vp_dev->msix_names = NULL;
+ kfree(vp_dev->msix_entries);
+ vp_dev->msix_entries = NULL;
}
-static int vp_request_vectors(struct virtio_device *vdev, unsigned max_vqs)
+static int vp_request_vectors(struct virtio_device *vdev, int nvectors,
+ bool per_vq_vectors)
{
struct virtio_pci_device *vp_dev = to_vp_device(vdev);
const char *name = dev_name(&vp_dev->vdev.dev);
unsigned i, v;
int err = -ENOMEM;
- /* We want at most one vector per queue and one for config changes.
- * Fallback to separate vectors for config and a shared for queues.
- * Finally fall back to regular interrupts. */
- int options[] = { max_vqs + 1, 2 };
- int nvectors = max(options[0], options[1]);
+
+ if (!nvectors) {
+ /* Can't allocate MSI-X vectors, use regular interrupt */
+ vp_dev->msix_vectors = 0;
+ err = request_irq(vp_dev->pci_dev->irq, vp_interrupt,
+ IRQF_SHARED, name, vp_dev);
+ if (err)
+ return err;
+ vp_dev->intx_enabled = 1;
+ return 0;
+ }
vp_dev->msix_entries = kmalloc(nvectors * sizeof *vp_dev->msix_entries,
GFP_KERNEL);
if (!vp_dev->msix_entries)
- goto error_entries;
+ goto error;
vp_dev->msix_names = kmalloc(nvectors * sizeof *vp_dev->msix_names,
GFP_KERNEL);
if (!vp_dev->msix_names)
- goto error_names;
+ goto error;
for (i = 0; i < nvectors; ++i)
vp_dev->msix_entries[i].entry = i;
- err = vp_enable_msix(vp_dev->pci_dev, vp_dev->msix_entries,
- options, ARRAY_SIZE(options));
- if (err < 0) {
- /* Can't allocate enough MSI-X vectors, use regular interrupt */
- vp_dev->msix_vectors = 0;
- err = request_irq(vp_dev->pci_dev->irq, vp_interrupt,
- IRQF_SHARED, name, vp_dev);
- if (err)
- goto error_irq;
- vp_dev->intx_enabled = 1;
- } else {
- vp_dev->msix_vectors = err;
- vp_dev->msix_enabled = 1;
-
- /* Set the vector used for configuration */
- v = vp_dev->msix_used_vectors;
- snprintf(vp_dev->msix_names[v], sizeof *vp_dev->msix_names,
- "%s-config", name);
- err = request_irq(vp_dev->msix_entries[v].vector,
- vp_config_changed, 0, vp_dev->msix_names[v],
- vp_dev);
- if (err)
- goto error_irq;
- ++vp_dev->msix_used_vectors;
-
- iowrite16(v, vp_dev->ioaddr + VIRTIO_MSI_CONFIG_VECTOR);
- /* Verify we had enough resources to assign the vector */
- v = ioread16(vp_dev->ioaddr + VIRTIO_MSI_CONFIG_VECTOR);
- if (v == VIRTIO_MSI_NO_VECTOR) {
- err = -EBUSY;
- goto error_irq;
- }
+ err = pci_enable_msix(vp_dev->pci_dev, vp_dev->msix_entries, nvectors);
+ if (err > 0)
+ err = -ENOSPC;
+ if (err)
+ goto error;
+ vp_dev->msix_vectors = nvectors;
+ vp_dev->msix_enabled = 1;
+
+ /* Set the vector used for configuration */
+ v = vp_dev->msix_used_vectors;
+ snprintf(vp_dev->msix_names[v], sizeof *vp_dev->msix_names,
+ "%s-config", name);
+ err = request_irq(vp_dev->msix_entries[v].vector,
+ vp_config_changed, 0, vp_dev->msix_names[v],
+ vp_dev);
+ if (err)
+ goto error;
+ ++vp_dev->msix_used_vectors;
+
+ iowrite16(v, vp_dev->ioaddr + VIRTIO_MSI_CONFIG_VECTOR);
+ /* Verify we had enough resources to assign the vector */
+ v = ioread16(vp_dev->ioaddr + VIRTIO_MSI_CONFIG_VECTOR);
+ if (v == VIRTIO_MSI_NO_VECTOR) {
+ err = -EBUSY;
+ goto error;
}
- if (vp_dev->msix_vectors && vp_dev->msix_vectors != max_vqs + 1) {
+ if (!per_vq_vectors) {
/* Shared vector for all VQs */
v = vp_dev->msix_used_vectors;
snprintf(vp_dev->msix_names[v], sizeof *vp_dev->msix_names,
@@ -349,28 +347,25 @@ static int vp_request_vectors(struct virtio_device *vdev, unsigned max_vqs)
vp_vring_interrupt, 0, vp_dev->msix_names[v],
vp_dev);
if (err)
- goto error_irq;
+ goto error;
++vp_dev->msix_used_vectors;
}
return 0;
-error_irq:
+error:
vp_free_vectors(vdev);
- kfree(vp_dev->msix_names);
-error_names:
- kfree(vp_dev->msix_entries);
-error_entries:
return err;
}
static struct virtqueue *vp_find_vq(struct virtio_device *vdev, unsigned index,
void (*callback)(struct virtqueue *vq),
- const char *name)
+ const char *name,
+ u16 vector)
{
struct virtio_pci_device *vp_dev = to_vp_device(vdev);
struct virtio_pci_vq_info *info;
struct virtqueue *vq;
unsigned long flags, size;
- u16 num, vector;
+ u16 num;
int err;
/* Select the queue we're interested in */
@@ -389,7 +384,7 @@ static struct virtqueue *vp_find_vq(struct virtio_device *vdev, unsigned index,
info->queue_index = index;
info->num = num;
- info->vector = VIRTIO_MSI_NO_VECTOR;
+ info->vector = vector;
size = PAGE_ALIGN(vring_size(num, VIRTIO_PCI_VRING_ALIGN));
info->queue = alloc_pages_exact(size, GFP_KERNEL|__GFP_ZERO);
@@ -413,22 +408,7 @@ static struct virtqueue *vp_find_vq(struct virtio_device *vdev, unsigned index,
vq->priv = info;
info->vq = vq;
- /* allocate per-vq vector if available and necessary */
- if (callback && vp_dev->msix_used_vectors < vp_dev->msix_vectors) {
- vector = vp_dev->msix_used_vectors;
- snprintf(vp_dev->msix_names[vector], sizeof *vp_dev->msix_names,
- "%s-%s", dev_name(&vp_dev->vdev.dev), name);
- err = request_irq(vp_dev->msix_entries[vector].vector,
- vring_interrupt, 0,
- vp_dev->msix_names[vector], vq);
- if (err)
- goto out_request_irq;
- info->vector = vector;
- ++vp_dev->msix_used_vectors;
- } else
- vector = VP_MSIX_VQ_VECTOR;
-
- if (callback && vp_dev->msix_enabled) {
+ if (vector != VIRTIO_MSI_NO_VECTOR) {
iowrite16(vector, vp_dev->ioaddr + VIRTIO_MSI_QUEUE_VECTOR);
vector = ioread16(vp_dev->ioaddr + VIRTIO_MSI_QUEUE_VECTOR);
if (vector == VIRTIO_MSI_NO_VECTOR) {
@@ -444,11 +424,6 @@ static struct virtqueue *vp_find_vq(struct virtio_device *vdev, unsigned index,
return vq;
out_assign:
- if (info->vector != VIRTIO_MSI_NO_VECTOR) {
- free_irq(vp_dev->msix_entries[info->vector].vector, vq);
- --vp_dev->msix_used_vectors;
- }
-out_request_irq:
vring_del_virtqueue(vq);
out_activate_queue:
iowrite32(0, vp_dev->ioaddr + VIRTIO_PCI_QUEUE_PFN);
@@ -462,12 +437,13 @@ static void vp_del_vq(struct virtqueue *vq)
{
struct virtio_pci_device *vp_dev = to_vp_device(vq->vdev);
struct virtio_pci_vq_info *info = vq->priv;
- unsigned long size;
+ unsigned long flags, size;
- iowrite16(info->queue_index, vp_dev->ioaddr + VIRTIO_PCI_QUEUE_SEL);
+ spin_lock_irqsave(&vp_dev->lock, flags);
+ list_del(&info->node);
+ spin_unlock_irqrestore(&vp_dev->lock, flags);
- if (info->vector != VIRTIO_MSI_NO_VECTOR)
- free_irq(vp_dev->msix_entries[info->vector].vector, vq);
+ iowrite16(info->queue_index, vp_dev->ioaddr + VIRTIO_PCI_QUEUE_SEL);
if (vp_dev->msix_enabled) {
iowrite16(VIRTIO_MSI_NO_VECTOR,
@@ -489,36 +465,62 @@ static void vp_del_vq(struct virtqueue *vq)
/* the config->del_vqs() implementation */
static void vp_del_vqs(struct virtio_device *vdev)
{
+ struct virtio_pci_device *vp_dev = to_vp_device(vdev);
struct virtqueue *vq, *n;
+ struct virtio_pci_vq_info *info;
- list_for_each_entry_safe(vq, n, &vdev->vqs, list)
+ list_for_each_entry_safe(vq, n, &vdev->vqs, list) {
+ info = vq->priv;
+ if (vp_dev->per_vq_vectors)
+ free_irq(vp_dev->msix_entries[info->vector].vector, vq);
vp_del_vq(vq);
+ }
+ vp_dev->per_vq_vectors = false;
vp_free_vectors(vdev);
}
-/* the config->find_vqs() implementation */
-static int vp_find_vqs(struct virtio_device *vdev, unsigned nvqs,
- struct virtqueue *vqs[],
- vq_callback_t *callbacks[],
- const char *names[])
+static int vp_try_to_find_vqs(struct virtio_device *vdev, unsigned nvqs,
+ struct virtqueue *vqs[],
+ vq_callback_t *callbacks[],
+ const char *names[],
+ int nvectors,
+ bool per_vq_vectors)
{
- int vectors = 0;
- int i, err;
-
- /* How many vectors would we like? */
- for (i = 0; i < nvqs; ++i)
- if (callbacks[i])
- ++vectors;
+ struct virtio_pci_device *vp_dev = to_vp_device(vdev);
+ u16 vector;
+ int i, err, allocated_vectors;
- err = vp_request_vectors(vdev, vectors);
+ err = vp_request_vectors(vdev, nvectors, per_vq_vectors);
if (err)
goto error_request;
+ vp_dev->per_vq_vectors = per_vq_vectors;
+ allocated_vectors = vp_dev->msix_used_vectors;
for (i = 0; i < nvqs; ++i) {
- vqs[i] = vp_find_vq(vdev, i, callbacks[i], names[i]);
- if (IS_ERR(vqs[i]))
+ if (!callbacks[i] || !vp_dev->msix_enabled)
+ vector = VIRTIO_MSI_NO_VECTOR;
+ else if (vp_dev->per_vq_vectors)
+ vector = allocated_vectors++;
+ else
+ vector = VP_MSIX_VQ_VECTOR;
+ vqs[i] = vp_find_vq(vdev, i, callbacks[i], names[i], vector);
+ if (IS_ERR(vqs[i])) {
+ err = PTR_ERR(vqs[i]);
goto error_find;
+ }
+ /* allocate per-vq irq if available and necessary */
+ if (vp_dev->per_vq_vectors && vector != VIRTIO_MSI_NO_VECTOR) {
+ snprintf(vp_dev->msix_names[vector], sizeof *vp_dev->msix_names,
+ "%s-%s", dev_name(&vp_dev->vdev.dev), names[i]);
+ err = request_irq(vp_dev->msix_entries[vector].vector,
+ vring_interrupt, 0,
+ vp_dev->msix_names[vector], vqs[i]);
+ if (err) {
+ vp_del_vq(vqs[i]);
+ goto error_find;
+ }
+ }
}
return 0;
@@ -526,7 +528,37 @@ error_find:
vp_del_vqs(vdev);
error_request:
- return PTR_ERR(vqs[i]);
+ return err;
+}
+
+/* the config->find_vqs() implementation */
+static int vp_find_vqs(struct virtio_device *vdev, unsigned nvqs,
+ struct virtqueue *vqs[],
+ vq_callback_t *callbacks[],
+ const char *names[])
+{
+ int vectors = 0;
+ int i, uninitialized_var(err);
+
+ /* How many vectors would we like? */
+ for (i = 0; i < nvqs; ++i)
+ if (callbacks[i])
+ ++vectors;
+
+ /* We want at most one vector per queue and one for config changes. */
+ err = vp_try_to_find_vqs(vdev, nvqs, vqs, callbacks, names,
+ vectors + 1, true);
+ if (!err)
+ return 0;
+ /* Fallback to separate vectors for config and a shared for queues. */
+ err = vp_try_to_find_vqs(vdev, nvqs, vqs, callbacks, names,
+ 2, false);
+ if (!err)
+ return 0;
+ /* Finally fall back to regular interrupts. */
+ err = vp_try_to_find_vqs(vdev, nvqs, vqs, callbacks, names,
+ 0, false);
+ return err;
}
static struct virtio_config_ops virtio_pci_config_ops = {
diff --git a/drivers/w1/masters/omap_hdq.c b/drivers/w1/masters/omap_hdq.c
index a7e3b706b9d..0d92969404c 100644
--- a/drivers/w1/masters/omap_hdq.c
+++ b/drivers/w1/masters/omap_hdq.c
@@ -687,6 +687,7 @@ static int omap_hdq_remove(struct platform_device *pdev)
if (hdq_data->hdq_usecount) {
dev_dbg(&pdev->dev, "removed when use count is not zero\n");
+ mutex_unlock(&hdq_data->hdq_mutex);
return -EBUSY;
}
diff --git a/drivers/watchdog/coh901327_wdt.c b/drivers/watchdog/coh901327_wdt.c
index fecb307d28e..aec7cefdef2 100644
--- a/drivers/watchdog/coh901327_wdt.c
+++ b/drivers/watchdog/coh901327_wdt.c
@@ -18,6 +18,7 @@
#include <linux/bitops.h>
#include <linux/uaccess.h>
#include <linux/clk.h>
+#include <linux/delay.h>
#define DRV_NAME "WDOG COH 901 327"
@@ -92,6 +93,8 @@ static struct clk *clk;
static void coh901327_enable(u16 timeout)
{
u16 val;
+ unsigned long freq;
+ unsigned long delay_ns;
clk_enable(clk);
/* Restart timer if it is disabled */
@@ -102,6 +105,14 @@ static void coh901327_enable(u16 timeout)
/* Acknowledge any pending interrupt so it doesn't just fire off */
writew(U300_WDOG_IER_WILL_BARK_IRQ_ACK_ENABLE,
virtbase + U300_WDOG_IER);
+ /*
+ * The interrupt is cleared in the 32 kHz clock domain.
+ * Wait 3 32 kHz cycles for it to take effect
+ */
+ freq = clk_get_rate(clk);
+ delay_ns = (1000000000 + freq - 1) / freq; /* Freq to ns and round up */
+ delay_ns = 3 * delay_ns; /* Wait 3 cycles */
+ ndelay(delay_ns);
/* Enable the watchdog interrupt */
writew(U300_WDOG_IMR_WILL_BARK_IRQ_ENABLE, virtbase + U300_WDOG_IMR);
/* Activate the watchdog timer */
diff --git a/drivers/watchdog/ks8695_wdt.c b/drivers/watchdog/ks8695_wdt.c
index 00b03eb43bf..e1c82769b08 100644
--- a/drivers/watchdog/ks8695_wdt.c
+++ b/drivers/watchdog/ks8695_wdt.c
@@ -66,7 +66,7 @@ static inline void ks8695_wdt_stop(void)
static inline void ks8695_wdt_start(void)
{
unsigned long tmcon;
- unsigned long tval = wdt_time * CLOCK_TICK_RATE;
+ unsigned long tval = wdt_time * KS8695_CLOCK_RATE;
spin_lock(&ks8695_lock);
/* disable timer0 */
@@ -103,7 +103,7 @@ static inline void ks8695_wdt_reload(void)
static int ks8695_wdt_settimeout(int new_time)
{
/*
- * All counting occurs at SLOW_CLOCK / 128 = 0.256 Hz
+ * All counting occurs at KS8695_CLOCK_RATE / 128 = 0.256 Hz
*
* Since WDV is a 16-bit counter, the maximum period is
* 65536 / 0.256 = 256 seconds.