diff options
Diffstat (limited to 'drivers')
40 files changed, 553 insertions, 344 deletions
diff --git a/drivers/atm/Kconfig b/drivers/atm/Kconfig index 489de81ea60..01a9f1cb774 100644 --- a/drivers/atm/Kconfig +++ b/drivers/atm/Kconfig @@ -5,6 +5,13 @@ menu "ATM drivers" depends on NETDEVICES && ATM +config ATM_DUMMY + tristate "Dummy ATM driver" + depends on ATM + help + Dummy ATM driver. Useful for proxy signalling, testing, + and development. If unsure, say N. + config ATM_TCP tristate "ATM over TCP" depends on INET && ATM diff --git a/drivers/atm/Makefile b/drivers/atm/Makefile index 5b77188527a..b5077ce8cb4 100644 --- a/drivers/atm/Makefile +++ b/drivers/atm/Makefile @@ -31,6 +31,7 @@ ifeq ($(CONFIG_ATM_IDT77252_USE_SUNI),y) obj-$(CONFIG_ATM_IDT77252) += suni.o endif +obj-$(CONFIG_ATM_DUMMY) += adummy.o obj-$(CONFIG_ATM_TCP) += atmtcp.o obj-$(CONFIG_ATM_FIRESTREAM) += firestream.o obj-$(CONFIG_ATM_LANAI) += lanai.o diff --git a/drivers/atm/adummy.c b/drivers/atm/adummy.c new file mode 100644 index 00000000000..d15c194be44 --- /dev/null +++ b/drivers/atm/adummy.c @@ -0,0 +1,168 @@ +/* + * adummy.c: a dummy ATM driver + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/version.h> +#include <linux/kernel.h> +#include <linux/skbuff.h> +#include <linux/pci.h> +#include <linux/errno.h> +#include <linux/types.h> +#include <linux/string.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/mm.h> +#include <linux/sched.h> +#include <linux/timer.h> +#include <linux/interrupt.h> +#include <asm/io.h> +#include <asm/byteorder.h> +#include <asm/uaccess.h> + +#include <linux/atmdev.h> +#include <linux/atm.h> +#include <linux/sonet.h> + +/* version definition */ + +#define DRV_VERSION "1.0" + +#define DEV_LABEL "adummy" + +#define ADUMMY_DEV(dev) ((struct adummy_dev *) (dev)->dev_data) + +struct adummy_dev { + struct atm_dev *atm_dev; + + struct list_head entry; +}; + +/* globals */ + +static LIST_HEAD(adummy_devs); + +static int __init +adummy_start(struct atm_dev *dev) +{ + dev->ci_range.vpi_bits = 4; + dev->ci_range.vci_bits = 12; + + return 0; +} + +static int +adummy_open(struct atm_vcc *vcc) +{ + short vpi = vcc->vpi; + int vci = vcc->vci; + + if (vci == ATM_VCI_UNSPEC || vpi == ATM_VPI_UNSPEC) + return 0; + + set_bit(ATM_VF_ADDR, &vcc->flags); + set_bit(ATM_VF_READY, &vcc->flags); + + return 0; +} + +static void +adummy_close(struct atm_vcc *vcc) +{ + clear_bit(ATM_VF_READY, &vcc->flags); + clear_bit(ATM_VF_ADDR, &vcc->flags); +} + +static int +adummy_send(struct atm_vcc *vcc, struct sk_buff *skb) +{ + if (vcc->pop) + vcc->pop(vcc, skb); + else + dev_kfree_skb_any(skb); + atomic_inc(&vcc->stats->tx); + + return 0; +} + +static int +adummy_proc_read(struct atm_dev *dev, loff_t *pos, char *page) +{ + int left = *pos; + + if (!left--) + return sprintf(page, "version %s\n", DRV_VERSION); + + return 0; +} + +static struct atmdev_ops adummy_ops = +{ + .open = adummy_open, + .close = adummy_close, + .send = adummy_send, + .proc_read = adummy_proc_read, + .owner = THIS_MODULE +}; + +static int __init adummy_init(void) +{ + struct atm_dev *atm_dev; + struct adummy_dev *adummy_dev; + int err = 0; + + printk(KERN_ERR "adummy: version %s\n", DRV_VERSION); + + adummy_dev = (struct adummy_dev *) kmalloc(sizeof(struct adummy_dev), + GFP_KERNEL); + if (!adummy_dev) { + printk(KERN_ERR DEV_LABEL ": kmalloc() failed\n"); + err = -ENOMEM; + goto out; + } + memset(adummy_dev, 0, sizeof(struct adummy_dev)); + + atm_dev = atm_dev_register(DEV_LABEL, &adummy_ops, -1, 0); + if (!atm_dev) { + printk(KERN_ERR DEV_LABEL ": atm_dev_register() failed\n"); + err = -ENODEV; + goto out_kfree; + } + + adummy_dev->atm_dev = atm_dev; + atm_dev->dev_data = adummy_dev; + + if (adummy_start(atm_dev)) { + printk(KERN_ERR DEV_LABEL ": adummy_start() failed\n"); + err = -ENODEV; + goto out_unregister; + } + + list_add(&adummy_dev->entry, &adummy_devs); +out: + return err; + +out_unregister: + atm_dev_deregister(atm_dev); +out_kfree: + kfree(adummy_dev); + goto out; +} + +static void __exit adummy_cleanup(void) +{ + struct adummy_dev *adummy_dev, *next; + + list_for_each_entry_safe(adummy_dev, next, &adummy_devs, entry) { + atm_dev_deregister(adummy_dev->atm_dev); + kfree(adummy_dev); + } +} + +module_init(adummy_init); +module_exit(adummy_cleanup); + +MODULE_AUTHOR("chas williams <chas@cmf.nrl.navy.mil>"); +MODULE_DESCRIPTION("dummy ATM driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/atm/atmdev_init.c b/drivers/atm/atmdev_init.c deleted file mode 100644 index 0e09e5c28e3..00000000000 --- a/drivers/atm/atmdev_init.c +++ /dev/null @@ -1,54 +0,0 @@ -/* drivers/atm/atmdev_init.c - ATM device driver initialization */ - -/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */ - - -#include <linux/config.h> -#include <linux/init.h> - - -#ifdef CONFIG_ATM_ZATM -extern int zatm_detect(void); -#endif -#ifdef CONFIG_ATM_AMBASSADOR -extern int amb_detect(void); -#endif -#ifdef CONFIG_ATM_HORIZON -extern int hrz_detect(void); -#endif -#ifdef CONFIG_ATM_FORE200E -extern int fore200e_detect(void); -#endif -#ifdef CONFIG_ATM_LANAI -extern int lanai_detect(void); -#endif - - -/* - * For historical reasons, atmdev_init returns the number of devices found. - * Note that some detections may not go via atmdev_init (e.g. eni.c), so this - * number is meaningless. - */ - -int __init atmdev_init(void) -{ - int devs; - - devs = 0; -#ifdef CONFIG_ATM_ZATM - devs += zatm_detect(); -#endif -#ifdef CONFIG_ATM_AMBASSADOR - devs += amb_detect(); -#endif -#ifdef CONFIG_ATM_HORIZON - devs += hrz_detect(); -#endif -#ifdef CONFIG_ATM_FORE200E - devs += fore200e_detect(); -#endif -#ifdef CONFIG_ATM_LANAI - devs += lanai_detect(); -#endif - return devs; -} diff --git a/drivers/atm/atmtcp.c b/drivers/atm/atmtcp.c index 57f1810fdcc..fc518d85543 100644 --- a/drivers/atm/atmtcp.c +++ b/drivers/atm/atmtcp.c @@ -246,10 +246,6 @@ static void atmtcp_c_close(struct atm_vcc *vcc) { struct atm_dev *atmtcp_dev; struct atmtcp_dev_data *dev_data; - struct sock *s; - struct hlist_node *node; - struct atm_vcc *walk; - int i; atmtcp_dev = (struct atm_dev *) vcc->dev_data; dev_data = PRIV(atmtcp_dev); @@ -257,20 +253,8 @@ static void atmtcp_c_close(struct atm_vcc *vcc) if (dev_data->persist) return; atmtcp_dev->dev_data = NULL; kfree(dev_data); - shutdown_atm_dev(atmtcp_dev); + atm_dev_deregister(atmtcp_dev); vcc->dev_data = NULL; - read_lock(&vcc_sklist_lock); - for(i = 0; i < VCC_HTABLE_SIZE; ++i) { - struct hlist_head *head = &vcc_hash[i]; - - sk_for_each(s, node, head) { - walk = atm_sk(s); - if (walk->dev != atmtcp_dev) - continue; - wake_up(s->sk_sleep); - } - } - read_unlock(&vcc_sklist_lock); module_put(THIS_MODULE); } @@ -450,7 +434,7 @@ static int atmtcp_remove_persistent(int itf) if (PRIV(dev)->vcc) return 0; kfree(dev_data); atm_dev_put(dev); - shutdown_atm_dev(dev); + atm_dev_deregister(dev); return 0; } diff --git a/drivers/atm/lanai.c b/drivers/atm/lanai.c index 51ec1478729..69f4c7ce9a6 100644 --- a/drivers/atm/lanai.c +++ b/drivers/atm/lanai.c @@ -39,7 +39,7 @@ * o lanai_change_qos() isn't written yet * * o There aren't any ioctl's yet -- I'd like to eventually support - * setting loopback and LED modes that way. (see lanai_ioctl) + * setting loopback and LED modes that way. * * o If the segmentation engine or DMA gets shut down we should restart * card as per section 17.0i. (see lanai_reset) @@ -305,7 +305,7 @@ struct lanai_dev { * vci with their bit set */ static void vci_bitfield_iterate(struct lanai_dev *lanai, - /*const*/ unsigned long *lp, + const unsigned long *lp, void (*func)(struct lanai_dev *,vci_t vci)) { vci_t vci = find_first_bit(lp, NUM_VCI); @@ -951,7 +951,7 @@ static int __devinit eeprom_read(struct lanai_dev *lanai) /* read a big-endian 4-byte value out of eeprom */ static inline u32 eeprom_be4(const struct lanai_dev *lanai, int address) { - return be32_to_cpup((u32 *) (&lanai->eeprom[address])); + return be32_to_cpup((const u32 *) &lanai->eeprom[address]); } /* Checksum/validate EEPROM contents */ @@ -1160,7 +1160,7 @@ static inline int vcc_tx_space(const struct lanai_vcc *lvcc, int endptr) } /* test if VCC is currently backlogged */ -static inline int vcc_is_backlogged(/*const*/ struct lanai_vcc *lvcc) +static inline int vcc_is_backlogged(const struct lanai_vcc *lvcc) { return !skb_queue_empty(&lvcc->tx.backlog); } @@ -1395,7 +1395,8 @@ static void vcc_rx_aal5(struct lanai_vcc *lvcc, int endptr) { int size; struct sk_buff *skb; - /*const*/ u32 *x, *end = &lvcc->rx.buf.start[endptr * 4]; + const u32 *x; + u32 *end = &lvcc->rx.buf.start[endptr * 4]; int n = ((unsigned long) end) - ((unsigned long) lvcc->rx.buf.ptr); if (n < 0) n += lanai_buf_size(&lvcc->rx.buf); @@ -2111,7 +2112,7 @@ static int lanai_normalize_ci(struct lanai_dev *lanai, * shifted by that much as we compute * */ -static int pcr_to_cbricg(/*const*/ struct atm_qos *qos) +static int pcr_to_cbricg(const struct atm_qos *qos) { int rounddown = 0; /* 1 = Round PCR down, i.e. round ICG _up_ */ int x, icg, pcr = atm_pcr_goal(&qos->txtp); @@ -2434,93 +2435,6 @@ static int lanai_open(struct atm_vcc *atmvcc) return result; } -#if 0 -/* ioctl operations for card */ -/* NOTE: these are all DEBUGGING ONLY currently */ -static int lanai_ioctl(struct atm_dev *atmdev, unsigned int cmd, void __user *arg) -{ - int result = 0; - struct lanai_dev *lanai = (struct lanai_dev *) atmdev->dev_data; - switch(cmd) { - case 2106275: - shutdown_atm_dev(atmdev); - return 0; - case 2200000: { - unsigned long flags; - spin_lock_irqsave(&lanai->servicelock, flags); - run_service(lanai); - spin_unlock_irqrestore(&lanai->servicelock, flags); - return 0; } - case 2200002: - get_statistics(lanai); - return 0; - case 2200003: { - unsigned int i; - for (i = 0; i <= 0x5C ; i += 4) { - if (i==0x48) /* Write-only butt reg */ - continue; - printk(KERN_CRIT DEV_LABEL " 0x%02X: " - "0x%08X\n", i, - (unsigned int) readl(lanai->base + i)); - barrier(); mb(); - pcistatus_check(lanai, 0); - barrier(); mb(); - } - return 0; } - case 2200004: { - u8 b; - u16 w; - u32 dw; - struct pci_dev *pci = lanai->pci; - (void) pci_read_config_word(pci, PCI_VENDOR_ID, &w); - DPRINTK("vendor = 0x%X\n", (unsigned int) w); - (void) pci_read_config_word(pci, PCI_DEVICE_ID, &w); - DPRINTK("device = 0x%X\n", (unsigned int) w); - (void) pci_read_config_word(pci, PCI_COMMAND, &w); - DPRINTK("command = 0x%X\n", (unsigned int) w); - (void) pci_read_config_word(pci, PCI_STATUS, &w); - DPRINTK("status = 0x%X\n", (unsigned int) w); - (void) pci_read_config_dword(pci, - PCI_CLASS_REVISION, &dw); - DPRINTK("class/revision = 0x%X\n", (unsigned int) dw); - (void) pci_read_config_byte(pci, - PCI_CACHE_LINE_SIZE, &b); - DPRINTK("cache line size = 0x%X\n", (unsigned int) b); - (void) pci_read_config_byte(pci, PCI_LATENCY_TIMER, &b); - DPRINTK("latency = %d (0x%X)\n", - (int) b, (unsigned int) b); - (void) pci_read_config_byte(pci, PCI_HEADER_TYPE, &b); - DPRINTK("header type = 0x%X\n", (unsigned int) b); - (void) pci_read_config_byte(pci, PCI_BIST, &b); - DPRINTK("bist = 0x%X\n", (unsigned int) b); - /* skipping a few here */ - (void) pci_read_config_byte(pci, - PCI_INTERRUPT_LINE, &b); - DPRINTK("pci_int_line = 0x%X\n", (unsigned int) b); - (void) pci_read_config_byte(pci, - PCI_INTERRUPT_PIN, &b); - DPRINTK("pci_int_pin = 0x%X\n", (unsigned int) b); - (void) pci_read_config_byte(pci, PCI_MIN_GNT, &b); - DPRINTK("min_gnt = 0x%X\n", (unsigned int) b); - (void) pci_read_config_byte(pci, PCI_MAX_LAT, &b); - DPRINTK("max_lat = 0x%X\n", (unsigned int) b); } - return 0; -#ifdef USE_POWERDOWN - case 2200005: - DPRINTK("Coming out of powerdown\n"); - lanai->conf1 &= ~CONFIG1_POWERDOWN; - conf1_write(lanai); - return 0; -#endif - default: - result = -ENOIOCTLCMD; - } - return result; -} -#else /* !0 */ -#define lanai_ioctl NULL -#endif /* 0 */ - static int lanai_send(struct atm_vcc *atmvcc, struct sk_buff *skb) { struct lanai_vcc *lvcc = (struct lanai_vcc *) atmvcc->dev_data; @@ -2678,7 +2592,6 @@ static const struct atmdev_ops ops = { .dev_close = lanai_dev_close, .open = lanai_open, .close = lanai_close, - .ioctl = lanai_ioctl, .getsockopt = NULL, .setsockopt = NULL, .send = lanai_send, @@ -2760,6 +2673,7 @@ static void __exit lanai_module_exit(void) * gone, so there isn't much to do */ DPRINTK("cleanup_module()\n"); + pci_unregister_driver(&lanai_driver); } module_init(lanai_module_init); diff --git a/drivers/char/drm/drm_context.c b/drivers/char/drm/drm_context.c index bdd168d88f4..bd958d69a2a 100644 --- a/drivers/char/drm/drm_context.c +++ b/drivers/char/drm/drm_context.c @@ -432,7 +432,10 @@ int drm_addctx(struct inode *inode, struct file *filp, if (ctx.handle != DRM_KERNEL_CONTEXT) { if (dev->driver->context_ctor) - dev->driver->context_ctor(dev, ctx.handle); + if (!dev->driver->context_ctor(dev, ctx.handle)) { + DRM_DEBUG( "Running out of ctxs or memory.\n"); + return -ENOMEM; + } } ctx_entry = drm_alloc(sizeof(*ctx_entry), DRM_MEM_CTXLIST); diff --git a/drivers/hwmon/w83792d.c b/drivers/hwmon/w83792d.c index 4be59dbb78c..1ba07263036 100644 --- a/drivers/hwmon/w83792d.c +++ b/drivers/hwmon/w83792d.c @@ -193,6 +193,7 @@ static const u8 W83792D_REG_LEVELS[3][4] = { 0xE2 } /* (bit3-0) SmartFanII: Fan3 Level 3 */ }; +#define W83792D_REG_GPIO_EN 0x1A #define W83792D_REG_CONFIG 0x40 #define W83792D_REG_VID_FANDIV 0x47 #define W83792D_REG_CHIPID 0x49 @@ -257,7 +258,7 @@ DIV_TO_REG(long val) { int i; val = SENSORS_LIMIT(val, 1, 128) >> 1; - for (i = 0; i < 6; i++) { + for (i = 0; i < 7; i++) { if (val == 0) break; val >>= 1; @@ -1282,8 +1283,8 @@ w83792d_detect(struct i2c_adapter *adapter, int address, int kind) w83792d_init_client(new_client); /* A few vars need to be filled upon startup */ - for (i = 1; i <= 7; i++) { - data->fan_min[i - 1] = w83792d_read_value(new_client, + for (i = 0; i < 7; i++) { + data->fan_min[i] = w83792d_read_value(new_client, W83792D_REG_FAN_MIN[i]); } @@ -1306,10 +1307,20 @@ w83792d_detect(struct i2c_adapter *adapter, int address, int kind) device_create_file_fan(new_client, 1); device_create_file_fan(new_client, 2); device_create_file_fan(new_client, 3); - device_create_file_fan(new_client, 4); - device_create_file_fan(new_client, 5); - device_create_file_fan(new_client, 6); - device_create_file_fan(new_client, 7); + + /* Read GPIO enable register to check if pins for fan 4,5 are used as + GPIO */ + val1 = w83792d_read_value(new_client, W83792D_REG_GPIO_EN); + if (!(val1 & 0x40)) + device_create_file_fan(new_client, 4); + if (!(val1 & 0x20)) + device_create_file_fan(new_client, 5); + + val1 = w83792d_read_value(new_client, W83792D_REG_PIN); + if (val1 & 0x40) + device_create_file_fan(new_client, 6); + if (val1 & 0x04) + device_create_file_fan(new_client, 7); device_create_file_temp1(new_client); /* Temp1 */ device_create_file_temp_add(new_client, 2); /* Temp2 */ diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c index 74022316fc6..65c2ec5c421 100644 --- a/drivers/message/fusion/mptbase.c +++ b/drivers/message/fusion/mptbase.c @@ -91,9 +91,9 @@ static int mfcounter = 0; * Public data... */ int mpt_lan_index = -1; -static int mpt_stm_index = -1; +int mpt_stm_index = -1; -static struct proc_dir_entry *mpt_proc_root_dir; +struct proc_dir_entry *mpt_proc_root_dir; #define WHOINIT_UNKNOWN 0xAA @@ -6271,6 +6271,7 @@ EXPORT_SYMBOL(mpt_resume); EXPORT_SYMBOL(mpt_suspend); #endif EXPORT_SYMBOL(ioc_list); +EXPORT_SYMBOL(mpt_proc_root_dir); EXPORT_SYMBOL(mpt_register); EXPORT_SYMBOL(mpt_deregister); EXPORT_SYMBOL(mpt_event_register); @@ -6288,6 +6289,7 @@ EXPORT_SYMBOL(mpt_verify_adapter); EXPORT_SYMBOL(mpt_GetIocState); EXPORT_SYMBOL(mpt_print_ioc_summary); EXPORT_SYMBOL(mpt_lan_index); +EXPORT_SYMBOL(mpt_stm_index); EXPORT_SYMBOL(mpt_HardResetHandler); EXPORT_SYMBOL(mpt_config); EXPORT_SYMBOL(mpt_toolbox); diff --git a/drivers/message/fusion/mptbase.h b/drivers/message/fusion/mptbase.h index 8ad277a9afa..5f5b3fb5b4d 100644 --- a/drivers/message/fusion/mptbase.h +++ b/drivers/message/fusion/mptbase.h @@ -1006,8 +1006,10 @@ extern int mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode); * Public data decl's... */ extern struct list_head ioc_list; +extern struct proc_dir_entry *mpt_proc_root_dir; extern int mpt_lan_index; /* needed by mptlan.c */ +extern int mpt_stm_index; /* needed by mptstm.c */ /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ #endif /* } __KERNEL__ */ diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c index 143f01a4c17..69c04945591 100644 --- a/drivers/mtd/chips/cfi_cmdset_0001.c +++ b/drivers/mtd/chips/cfi_cmdset_0001.c @@ -4,7 +4,7 @@ * * (C) 2000 Red Hat. GPL'd * - * $Id: cfi_cmdset_0001.c,v 1.185 2005/11/07 11:14:22 gleixner Exp $ + * $Id: cfi_cmdset_0001.c,v 1.186 2005/11/23 22:07:52 nico Exp $ * * * 10/10/2000 Nicolas Pitre <nico@cam.org> @@ -644,9 +644,8 @@ static int get_chip(struct map_info *map, struct flchip *chip, unsigned long adr * * - contension arbitration is handled in the owner's context. * - * The 'shared' struct can be read when its lock is taken. - * However any writes to it can only be made when the current - * owner's lock is also held. + * The 'shared' struct can be read and/or written only when + * its lock is taken. */ struct flchip_shared *shared = chip->priv; struct flchip *contender; @@ -675,14 +674,13 @@ static int get_chip(struct map_info *map, struct flchip *chip, unsigned long adr } timeo = jiffies + HZ; spin_lock(&shared->lock); + spin_unlock(contender->mutex); } /* We now own it */ shared->writing = chip; if (mode == FL_ERASING) shared->erasing = chip; - if (contender && contender != chip) - spin_unlock(contender->mutex); spin_unlock(&shared->lock); } diff --git a/drivers/mtd/chips/cfi_probe.c b/drivers/mtd/chips/cfi_probe.c index 90eb30e06b7..e636aa86bc2 100644 --- a/drivers/mtd/chips/cfi_probe.c +++ b/drivers/mtd/chips/cfi_probe.c @@ -1,7 +1,7 @@ /* Common Flash Interface probe code. (C) 2000 Red Hat. GPL'd. - $Id: cfi_probe.c,v 1.84 2005/11/07 11:14:23 gleixner Exp $ + $Id: cfi_probe.c,v 1.86 2005/11/29 14:48:31 gleixner Exp $ */ #include <linux/config.h> @@ -230,8 +230,8 @@ static int __xipram cfi_chip_setup(struct map_info *map, cfi_send_gen_cmd(0xaa, 0x555, base, map, cfi, cfi->device_type, NULL); cfi_send_gen_cmd(0x55, 0x2aa, base, map, cfi, cfi->device_type, NULL); cfi_send_gen_cmd(0x90, 0x555, base, map, cfi, cfi->device_type, NULL); - cfi->mfr = cfi_read_query(map, base); - cfi->id = cfi_read_query(map, base + ofs_factor); + cfi->mfr = cfi_read_query16(map, base); + cfi->id = cfi_read_query16(map, base + ofs_factor); /* Put it back into Read Mode */ cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL); @@ -426,7 +426,7 @@ static struct mtd_chip_driver cfi_chipdrv = { .module = THIS_MODULE }; -int __init cfi_probe_init(void) +static int __init cfi_probe_init(void) { register_mtd_chip_driver(&cfi_chipdrv); return 0; diff --git a/drivers/mtd/chips/sharp.c b/drivers/mtd/chips/sharp.c index 2d26bdef82d..36f61a6a766 100644 --- a/drivers/mtd/chips/sharp.c +++ b/drivers/mtd/chips/sharp.c @@ -4,7 +4,7 @@ * Copyright 2000,2001 David A. Schleef <ds@schleef.org> * 2000,2001 Lineo, Inc. * - * $Id: sharp.c,v 1.16 2005/11/07 11:14:23 gleixner Exp $ + * $Id: sharp.c,v 1.17 2005/11/29 14:28:28 gleixner Exp $ * * Devices supported: * LH28F016SCT Symmetrical block flash memory, 2Mx8 @@ -160,22 +160,28 @@ struct mtd_info *sharp_probe(struct map_info *map) return mtd; } +static inline void sharp_send_cmd(struct map_info *map, unsigned long cmd, unsigned long adr) +{ + map_word map_cmd; + map_cmd.x[0] = cmd; + map_write(map, map_cmd, adr); +} + static int sharp_probe_map(struct map_info *map,struct mtd_info *mtd) { - unsigned long tmp; + map_word tmp, read0, read4; unsigned long base = 0; - u32 read0, read4; int width = 4; - tmp = map_read32(map, base+0); + tmp = map_read(map, base+0); - map_write32(map, CMD_READ_ID, base+0); + sharp_send_cmd(map, CMD_READ_ID, base+0); - read0=map_read32(map, base+0); - read4=map_read32(map, base+4); - if(read0 == 0x89898989){ + read0 = map_read(map, base+0); + read4 = map_read(map, base+4); + if(read0.x[0] == 0x89898989){ printk("Looks like sharp flash\n"); - switch(read4){ + switch(read4.x[0]){ case 0xaaaaaaaa: case 0xa0a0a0a0: /* aa - LH28F016SCT-L95 2Mx8, 32 64k blocks*/ @@ -197,16 +203,16 @@ static int sharp_probe_map(struct map_info *map,struct mtd_info *mtd) return width; #endif default: - printk("Sort-of looks like sharp flash, 0x%08x 0x%08x\n", - read0,read4); + printk("Sort-of looks like sharp flash, 0x%08lx 0x%08lx\n", + read0.x[0], read4.x[0]); } - }else if((map_read32(map, base+0) == CMD_READ_ID)){ + }else if((map_read(map, base+0).x[0] == CMD_READ_ID)){ /* RAM, probably */ printk("Looks like RAM\n"); - map_write32(map, tmp, base+0); + map_write(map, tmp, base+0); }else{ - printk("Doesn't look like sharp flash, 0x%08x 0x%08x\n", - read0,read4); + printk("Doesn't look like sharp flash, 0x%08lx 0x%08lx\n", + read0.x[0], read4.x[0]); } return 0; @@ -215,7 +221,8 @@ static int sharp_probe_map(struct map_info *map,struct mtd_info *mtd) /* This function returns with the chip->mutex lock held. */ static int sharp_wait(struct map_info *map, struct flchip *chip) { - int status, i; + int i; + map_word status; unsigned long timeo = jiffies + HZ; DECLARE_WAITQUEUE(wait, current); int adr = 0; @@ -225,12 +232,12 @@ retry: switch(chip->state){ case FL_READY: - map_write32(map,CMD_READ_STATUS,adr); + sharp_send_cmd(map, CMD_READ_STATUS, adr); chip->state = FL_STATUS; case FL_STATUS: for(i=0;i<100;i++){ - status = map_read32(map,adr); - if((status & SR_READY)==SR_READY) + status = map_read(map, adr); + if((status.x[0] & SR_READY)==SR_READY) break; udelay(1); } @@ -254,7 +261,7 @@ retry: goto retry; } - map_write32(map,CMD_RESET, adr); + sharp_send_cmd(map, CMD_RESET, adr); chip->state = FL_READY; @@ -351,37 +358,39 @@ static int sharp_write_oneword(struct map_info *map, struct flchip *chip, int timeo; int try; int i; - int status = 0; + map_word data, status; + status.x[0] = 0; ret = sharp_wait(map,chip); for(try=0;try<10;try++){ - map_write32(map,CMD_BYTE_WRITE,adr); + sharp_send_cmd(map, CMD_BYTE_WRITE, adr); /* cpu_to_le32 -> hack to fix the writel be->le conversion */ - map_write32(map,cpu_to_le32(datum),adr); + data.x[0] = cpu_to_le32(datum); + map_write(map, data, adr); chip->state = FL_WRITING; timeo = jiffies + (HZ/2); - map_write32(map,CMD_READ_STATUS,adr); + sharp_send_cmd(map, CMD_READ_STATUS, adr); for(i=0;i<100;i++){ - status = map_read32(map,adr); - if((status & SR_READY)==SR_READY) + status = map_read(map, adr); + if((status.x[0] & SR_READY) == SR_READY) break; } if(i==100){ printk("sharp: timed out writing\n"); } - if(!(status&SR_ERRORS)) + if(!(status.x[0] & SR_ERRORS)) break; - printk("sharp: error writing byte at addr=%08lx status=%08x\n",adr,status); + printk("sharp: error writing byte at addr=%08lx status=%08lx\n", adr, status.x[0]); - map_write32(map,CMD_CLEAR_STATUS,adr); + sharp_send_cmd(map, CMD_CLEAR_STATUS, adr); } - map_write32(map,CMD_RESET,adr); + sharp_send_cmd(map, CMD_RESET, adr); chip->state = FL_READY; wake_up(&chip->wq); @@ -434,18 +443,18 @@ static int sharp_do_wait_for_ready(struct map_info *map, struct flchip *chip, { int ret; unsigned long timeo; - int status; + map_word status; DECLARE_WAITQUEUE(wait, current); - map_write32(map,CMD_READ_STATUS,adr); - status = map_read32(map,adr); + sharp_send_cmd(map, CMD_READ_STATUS, adr); + status = map_read(map, adr); timeo = jiffies + HZ; while(time_before(jiffies, timeo)){ - map_write32(map,CMD_READ_STATUS,adr); - status = map_read32(map,adr); - if((status & SR_READY)==SR_READY){ + sharp_send_cmd(map, CMD_READ_STATUS, adr); + status = map_read(map, adr); + if((status.x[0] & SR_READY)==SR_READY){ ret = 0; goto out; } @@ -476,7 +485,7 @@ static int sharp_erase_oneblock(struct map_info *map, struct flchip *chip, { int ret; //int timeo; - int status; + map_word status; //int i; //printk("sharp_erase_oneblock()\n"); @@ -486,26 +495,26 @@ static int sharp_erase_oneblock(struct map_info *map, struct flchip *chip, sharp_unlock_oneblock(map,chip,adr); #endif - map_write32(map,CMD_BLOCK_ERASE_1,adr); - map_write32(map,CMD_BLOCK_ERASE_2,adr); + sharp_send_cmd(map, CMD_BLOCK_ERASE_1, adr); + sharp_send_cmd(map, CMD_BLOCK_ERASE_2, adr); chip->state = FL_ERASING; ret = sharp_do_wait_for_ready(map,chip,adr); if(ret<0)return ret; - map_write32(map,CMD_READ_STATUS,adr); - status = map_read32(map,adr); + sharp_send_cmd(map, CMD_READ_STATUS, adr); + status = map_read(map, adr); - if(!(status&SR_ERRORS)){ - map_write32(map,CMD_RESET,adr); + if(!(status.x[0] & SR_ERRORS)){ + sharp_send_cmd(map, CMD_RESET, adr); chip->state = FL_READY; //spin_unlock_bh(chip->mutex); return 0; } - printk("sharp: error erasing block at addr=%08lx status=%08x\n",adr,status); - map_write32(map,CMD_CLEAR_STATUS,adr); + printk("sharp: error erasing block at addr=%08lx status=%08lx\n", adr, status.x[0]); + sharp_send_cmd(map, CMD_CLEAR_STATUS, adr); //spin_unlock_bh(chip->mutex); @@ -517,20 +526,20 @@ static void sharp_unlock_oneblock(struct map_info *map, struct flchip *chip, unsigned long adr) { int i; - int status; + map_word status; - map_write32(map,CMD_CLEAR_BLOCK_LOCKS_1,adr); - map_write32(map,CMD_CLEAR_BLOCK_LOCKS_2,adr); + sharp_send_cmd(map, CMD_CLEAR_BLOCK_LOCKS_1, adr); + sharp_send_cmd(map, CMD_CLEAR_BLOCK_LOCKS_2, adr); udelay(100); - status = map_read32(map,adr); - printk("status=%08x\n",status); + status = map_read(map, adr); + printk("status=%08lx\n", status.x[0]); for(i=0;i<1000;i++){ - //map_write32(map,CMD_READ_STATUS,adr); - status = map_read32(map,adr); - if((status & SR_READY)==SR_READY) + //sharp_send_cmd(map, CMD_READ_STATUS, adr); + status = map_read(map, adr); + if((status.x[0] & SR_READY) == SR_READY) break; udelay(100); } @@ -538,14 +547,14 @@ static void sharp_unlock_oneblock(struct map_info *map, struct flchip *chip, printk("sharp: timed out unlocking block\n"); } - if(!(status&SR_ERRORS)){ - map_write32(map,CMD_RESET,adr); + if(!(status.x[0] & SR_ERRORS)){ + sharp_send_cmd(map, CMD_RESET, adr); chip->state = FL_READY; return; } - printk("sharp: error unlocking block at addr=%08lx status=%08x\n",adr,status); - map_write32(map,CMD_CLEAR_STATUS,adr); + printk("sharp: error unlocking block at addr=%08lx status=%08lx\n", adr, status.x[0]); + sharp_send_cmd(map, CMD_CLEAR_STATUS, adr); } #endif diff --git a/drivers/mtd/devices/block2mtd.c b/drivers/mtd/devices/block2mtd.c index 0aaa0ced9ab..7ff403b2a0a 100644 --- a/drivers/mtd/devices/block2mtd.c +++ b/drivers/mtd/devices/block2mtd.c @@ -1,5 +1,5 @@ /* - * $Id: block2mtd.c,v 1.29 2005/11/07 11:14:24 gleixner Exp $ + * $Id: block2mtd.c,v 1.30 2005/11/29 14:48:32 gleixner Exp $ * * block2mtd.c - create an mtd from a block device * @@ -19,7 +19,7 @@ #include <linux/mtd/mtd.h> #include <linux/buffer_head.h> -#define VERSION "$Revision: 1.29 $" +#define VERSION "$Revision: 1.30 $" #define ERROR(fmt, args...) printk(KERN_ERR "block2mtd: " fmt "\n" , ## args) @@ -40,7 +40,7 @@ static LIST_HEAD(blkmtd_device_list); #define PAGE_READAHEAD 64 -void cache_readahead(struct address_space *mapping, int index) +static void cache_readahead(struct address_space *mapping, int index) { filler_t *filler = (filler_t*)mapping->a_ops->readpage; int i, pagei; diff --git a/drivers/mtd/devices/ms02-nv.c b/drivers/mtd/devices/ms02-nv.c index f5026cee087..0ff2e437824 100644 --- a/drivers/mtd/devices/ms02-nv.c +++ b/drivers/mtd/devices/ms02-nv.c @@ -6,7 +6,7 @@ * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. * - * $Id: ms02-nv.c,v 1.10 2005/06/20 12:24:41 macro Exp $ + * $Id: ms02-nv.c,v 1.11 2005/11/14 13:41:47 macro Exp $ */ #include <linux/init.h> @@ -293,13 +293,13 @@ static int __init ms02nv_init(void) switch (mips_machtype) { case MACH_DS5000_200: - csr = (volatile u32 *)KN02_CSR_BASE; + csr = (volatile u32 *)CKSEG1ADDR(KN02_SLOT_BASE + KN02_CSR); if (*csr & KN02_CSR_BNK32M) stride = 2; break; case MACH_DS5000_2X0: case MACH_DS5900: - csr = (volatile u32 *)KN03_MCR_BASE; + csr = (volatile u32 *)CKSEG1ADDR(KN03_SLOT_BASE + IOASIC_MCR); if (*csr & KN03_MCR_BNK32M) stride = 2; break; diff --git a/drivers/mtd/ftl.c b/drivers/mtd/ftl.c index de7e231d6d1..8a878b34eca 100644 --- a/drivers/mtd/ftl.c +++ b/drivers/mtd/ftl.c @@ -1,5 +1,5 @@ /* This version ported to the Linux-MTD system by dwmw2@infradead.org - * $Id: ftl.c,v 1.58 2005/11/07 11:14:19 gleixner Exp $ + * $Id: ftl.c,v 1.59 2005/11/29 14:48:31 gleixner Exp $ * * Fixes: Arnaldo Carvalho de Melo <acme@conectiva.com.br> * - fixes some leaks on failure in build_maps and ftl_notify_add, cleanups @@ -1084,9 +1084,9 @@ struct mtd_blktrans_ops ftl_tr = { .owner = THIS_MODULE, }; -int init_ftl(void) +static int init_ftl(void) { - DEBUG(0, "$Id: ftl.c,v 1.58 2005/11/07 11:14:19 gleixner Exp $\n"); + DEBUG(0, "$Id: ftl.c,v 1.59 2005/11/29 14:48:31 gleixner Exp $\n"); return register_mtd_blktrans(&ftl_tr); } diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig index 846a533323a..452ccd5037c 100644 --- a/drivers/mtd/maps/Kconfig +++ b/drivers/mtd/maps/Kconfig @@ -538,12 +538,6 @@ config MTD_MPC1211 This enables access to the flash chips on the Interface MPC-1211(CTP/PCI/MPC-SH02). If you have such a board, say 'Y'. -config MTD_PQ2FADS - tristate "JEDEC flash SIMM mapped on PQ2FADS and 8272ADS boards" - depends on (ADS8272 || PQ2FADS) && MTD_PARTITIONS && MTD_JEDECPROBE && MTD_PHYSMAP && MTD_CFI_GEOMETRY && MTD_CFI_INTELEXT - help - This enables access to flash SIMM on PQ2FADS-like boards - config MTD_OMAP_NOR tristate "TI OMAP board mappings" depends on MTD_CFI && ARCH_OMAP diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile index 7d9e940a1dc..2f7e254912f 100644 --- a/drivers/mtd/maps/Makefile +++ b/drivers/mtd/maps/Makefile @@ -70,6 +70,5 @@ obj-$(CONFIG_MTD_DMV182) += dmv182.o obj-$(CONFIG_MTD_SHARP_SL) += sharpsl-flash.o obj-$(CONFIG_MTD_PLATRAM) += plat-ram.o obj-$(CONFIG_MTD_OMAP_NOR) += omap_nor.o -obj-$(CONFIG_MTD_PQ2FADS) += pq2fads.o obj-$(CONFIG_MTD_MTX1) += mtx-1_flash.o obj-$(CONFIG_MTD_TQM834x) += tqm834x.o diff --git a/drivers/mtd/maps/ixp4xx.c b/drivers/mtd/maps/ixp4xx.c index a59f8027903..986c5862839 100644 --- a/drivers/mtd/maps/ixp4xx.c +++ b/drivers/mtd/maps/ixp4xx.c @@ -1,5 +1,5 @@ /* - * $Id: ixp4xx.c,v 1.12 2005/11/07 11:14:27 gleixner Exp $ + * $Id: ixp4xx.c,v 1.13 2005/11/16 16:23:21 dvrabel Exp $ * * drivers/mtd/maps/ixp4xx.c * @@ -34,10 +34,55 @@ #include <linux/reboot.h> +/* + * Read/write a 16 bit word from flash address 'addr'. + * + * When the cpu is in little-endian mode it swizzles the address lines + * ('address coherency') so we need to undo the swizzling to ensure commands + * and the like end up on the correct flash address. + * + * To further complicate matters, due to the way the expansion bus controller + * handles 32 bit reads, the byte stream ABCD is stored on the flash as: + * D15 D0 + * +---+---+ + * | A | B | 0 + * +---+---+ + * | C | D | 2 + * +---+---+ + * This means that on LE systems each 16 bit word must be swapped. Note that + * this requires CONFIG_MTD_CFI_BE_BYTE_SWAP to be enabled to 'unswap' the CFI + * data and other flash commands which are always in D7-D0. + */ #ifndef __ARMEB__ +#ifndef CONFIG_MTD_CFI_BE_BYTE_SWAP +# error CONFIG_MTD_CFI_BE_BYTE_SWAP required +#endif + +static inline u16 flash_read16(void __iomem *addr) +{ + return be16_to_cpu(__raw_readw((void __iomem *)((unsigned long)addr ^ 0x2))); +} + +static inline void flash_write16(u16 d, void __iomem *addr) +{ + __raw_writew(cpu_to_be16(d), (void __iomem *)((unsigned long)addr ^ 0x2)); +} + #define BYTE0(h) ((h) & 0xFF) #define BYTE1(h) (((h) >> 8) & 0xFF) + #else + +static inline u16 flash_read16(const void __iomem *addr) +{ + return __raw_readw(addr); +} + +static inline void flash_write16(u16 d, void __iomem *addr) +{ + __raw_writew(d, addr); +} + #define BYTE0(h) (((h) >> 8) & 0xFF) #define BYTE1(h) ((h) & 0xFF) #endif @@ -45,7 +90,7 @@ static map_word ixp4xx_read16(struct map_info *map, unsigned long ofs) { map_word val; - val.x[0] = le16_to_cpu(readw(map->virt + ofs)); + val.x[0] = flash_read16(map->virt + ofs); return val; } @@ -57,19 +102,28 @@ static map_word ixp4xx_read16(struct map_info *map, unsigned long ofs) static void ixp4xx_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len) { - int i; u8 *dest = (u8 *) to; void __iomem *src = map->virt + from; - u16 data; - for (i = 0; i < (len / 2); i++) { - data = le16_to_cpu(readw(src + 2*i)); - dest[i * 2] = BYTE0(data); - dest[i * 2 + 1] = BYTE1(data); + if (len <= 0) + return; + + if (from & 1) { + *dest++ = BYTE1(flash_read16(src)); + src++; + --len; } - if (len & 1) - dest[len - 1] = BYTE0(le16_to_cpu(readw(src + 2*i))); + while (len >= 2) { + u16 data = flash_read16(src); + *dest++ = BYTE0(data); + *dest++ = BYTE1(data); + src += 2; + len -= 2; + } + + if (len > 0) + *dest++ = BYTE0(flash_read16(src)); } /* @@ -79,7 +133,7 @@ static void ixp4xx_copy_from(struct map_info *map, void *to, static void ixp4xx_probe_write16(struct map_info *map, map_word d, unsigned long adr) { if (!(adr & 1)) - writew(cpu_to_le16(d.x[0]), map->virt + adr); + flash_write16(d.x[0], map->virt + adr); } /* @@ -87,7 +141,7 @@ static void ixp4xx_probe_write16(struct map_info *map, map_word d, unsigned long */ static void ixp4xx_write16(struct map_info *map, map_word d, unsigned long adr) { - writew(cpu_to_le16(d.x[0]), map->virt + adr); + flash_write16(d.x[0], map->virt + adr); } struct ixp4xx_flash_info { diff --git a/drivers/mtd/maps/nettel.c b/drivers/mtd/maps/nettel.c index f00ee7e54db..632eb2aa968 100644 --- a/drivers/mtd/maps/nettel.c +++ b/drivers/mtd/maps/nettel.c @@ -6,7 +6,7 @@ * (C) Copyright 2000-2001, Greg Ungerer (gerg@snapgear.com) * (C) Copyright 2001-2002, SnapGear (www.snapgear.com) * - * $Id: nettel.c,v 1.11 2005/11/07 11:14:27 gleixner Exp $ + * $Id: nettel.c,v 1.12 2005/11/29 14:30:00 gleixner Exp $ */ /****************************************************************************/ @@ -479,7 +479,7 @@ void __exit nettel_cleanup(void) } if (nettel_intel_map.virt) { iounmap(nettel_intel_map.virt); - nettel_intel_map.virt = 0; + nettel_intel_map.virt = NULL; } #endif } diff --git a/drivers/mtd/maps/pci.c b/drivers/mtd/maps/pci.c index 8b3570b0909..21822c2edbe 100644 --- a/drivers/mtd/maps/pci.c +++ b/drivers/mtd/maps/pci.c @@ -7,7 +7,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * - * $Id: pci.c,v 1.13 2005/11/07 11:14:27 gleixner Exp $ + * $Id: pci.c,v 1.14 2005/11/17 08:20:27 dwmw2 Exp $ * * Generic PCI memory map driver. We support the following boards: * - Intel IQ80310 ATU. @@ -102,7 +102,7 @@ static void mtd_pci_copyto(struct map_info *_map, unsigned long to, const void * memcpy_toio(map->base + map->translate(map, to), from, len); } -static struct map_info mtd_pci_map = { +static const struct map_info mtd_pci_map = { .phys = NO_XIP, .copy_from = mtd_pci_copyfrom, .copy_to = mtd_pci_copyto, diff --git a/drivers/mtd/maps/physmap.c b/drivers/mtd/maps/physmap.c index 9ee760f97bc..f49ebc3c460 100644 --- a/drivers/mtd/maps/physmap.c +++ b/drivers/mtd/maps/physmap.c @@ -1,5 +1,5 @@ /* - * $Id: physmap.c,v 1.38 2005/11/07 11:14:28 gleixner Exp $ + * $Id: physmap.c,v 1.39 2005/11/29 14:49:36 gleixner Exp $ * * Normal mappings of chips in physical memory * @@ -19,6 +19,7 @@ #include <linux/mtd/map.h> #include <linux/config.h> #include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> static struct mtd_info *mymtd; diff --git a/drivers/mtd/maps/sc520cdp.c b/drivers/mtd/maps/sc520cdp.c index 6fb9f3c57aa..ed92afadd8a 100644 --- a/drivers/mtd/maps/sc520cdp.c +++ b/drivers/mtd/maps/sc520cdp.c @@ -16,7 +16,7 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA * - * $Id: sc520cdp.c,v 1.22 2005/11/07 11:14:28 gleixner Exp $ + * $Id: sc520cdp.c,v 1.23 2005/11/17 08:20:27 dwmw2 Exp $ * * * The SC520CDP is an evaluation board for the Elan SC520 processor available @@ -164,7 +164,7 @@ struct sc520_par_table unsigned long default_address; }; -static struct sc520_par_table par_table[NUM_FLASH_BANKS] = +static const struct sc520_par_table par_table[NUM_FLASH_BANKS] = { { /* Flash Bank #0: selected by ROMCS0 */ SC520_PAR_ROMCS0, diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c index de450039530..a0af92cc7ef 100644 --- a/drivers/mtd/nand/nandsim.c +++ b/drivers/mtd/nand/nandsim.c @@ -1486,7 +1486,7 @@ ns_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len) /* * Module initialization function */ -int __init ns_init_module(void) +static int __init ns_init_module(void) { struct nand_chip *chip; struct nandsim *nand; diff --git a/drivers/mtd/rfd_ftl.c b/drivers/mtd/rfd_ftl.c index 0ab8d29caee..20ce212638f 100644 --- a/drivers/mtd/rfd_ftl.c +++ b/drivers/mtd/rfd_ftl.c @@ -30,11 +30,9 @@ MODULE_PARM_DESC(block_size, "Block size to use by RFD, defaults to erase unit s #define PREFIX "rfd_ftl: " -/* Major device # for FTL device */ - -/* A request for this major has been sent to device@lanana.org */ +/* This major has been assigned by device@lanana.org */ #ifndef RFD_FTL_MAJOR -#define RFD_FTL_MAJOR 95 +#define RFD_FTL_MAJOR 256 #endif /* Maximum number of partitions in an FTL region */ diff --git a/drivers/scsi/megaraid.c b/drivers/scsi/megaraid.c index dfea346b00a..f9792528e33 100644 --- a/drivers/scsi/megaraid.c +++ b/drivers/scsi/megaraid.c @@ -380,23 +380,23 @@ megaraid_queue(Scsi_Cmnd *scmd, void (*done)(Scsi_Cmnd *)) spin_lock_irqsave(&adapter->lock, flags); scb = mega_build_cmd(adapter, scmd, &busy); + if (!scb) + goto out; - if(scb) { - scb->state |= SCB_PENDQ; - list_add_tail(&scb->list, &adapter->pending_list); + scb->state |= SCB_PENDQ; + list_add_tail(&scb->list, &adapter->pending_list); - /* - * Check if the HBA is in quiescent state, e.g., during a - * delete logical drive opertion. If it is, don't run - * the pending_list. - */ - if(atomic_read(&adapter->quiescent) == 0) { - mega_runpendq(adapter); - } - return 0; - } - spin_unlock_irqrestore(&adapter->lock, flags); + /* + * Check if the HBA is in quiescent state, e.g., during a + * delete logical drive opertion. If it is, don't run + * the pending_list. + */ + if (atomic_read(&adapter->quiescent) == 0) + mega_runpendq(adapter); + busy = 0; + out: + spin_unlock_irqrestore(&adapter->lock, flags); return busy; } @@ -4677,7 +4677,6 @@ megaraid_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) adapter->flag = flag; spin_lock_init(&adapter->lock); - scsi_assign_lock(host, &adapter->lock); host->cmd_per_lun = max_cmd_per_lun; host->max_sectors = max_sectors_per_io; diff --git a/drivers/usb/atm/cxacru.c b/drivers/usb/atm/cxacru.c index 79861ee12a2..9d59dc62e6d 100644 --- a/drivers/usb/atm/cxacru.c +++ b/drivers/usb/atm/cxacru.c @@ -787,6 +787,9 @@ static const struct usb_device_id cxacru_usb_ids[] = { { /* V = Conexant P = ADSL modem (Hasbani project) */ USB_DEVICE(0x0572, 0xcb00), .driver_info = (unsigned long) &cxacru_cb00 }, + { /* V = Conexant P = ADSL modem (Well PTI-800 */ + USB_DEVICE(0x0572, 0xcb02), .driver_info = (unsigned long) &cxacru_cb00 + }, { /* V = Conexant P = ADSL modem */ USB_DEVICE(0x0572, 0xcb01), .driver_info = (unsigned long) &cxacru_cb00 }, diff --git a/drivers/usb/atm/usbatm.c b/drivers/usb/atm/usbatm.c index c466739428b..2e6593e6c1b 100644 --- a/drivers/usb/atm/usbatm.c +++ b/drivers/usb/atm/usbatm.c @@ -879,7 +879,7 @@ static int usbatm_atm_init(struct usbatm_data *instance) fail: instance->atm_dev = NULL; - shutdown_atm_dev(atm_dev); /* usbatm_atm_dev_close will eventually be called */ + atm_dev_deregister(atm_dev); /* usbatm_atm_dev_close will eventually be called */ return ret; } @@ -1164,7 +1164,7 @@ void usbatm_usb_disconnect(struct usb_interface *intf) /* ATM finalize */ if (instance->atm_dev) - shutdown_atm_dev(instance->atm_dev); + atm_dev_deregister(instance->atm_dev); usbatm_put_instance(instance); /* taken in usbatm_usb_probe */ } diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c index 5131d88e8c5..29b5b2a6e18 100644 --- a/drivers/usb/core/hcd-pci.c +++ b/drivers/usb/core/hcd-pci.c @@ -219,6 +219,7 @@ int usb_hcd_pci_suspend (struct pci_dev *dev, pm_message_t message) goto done; } } + synchronize_irq(dev->irq); /* FIXME until the generic PM interfaces change a lot more, this * can't use PCI D1 and D2 states. For example, the confusion @@ -392,7 +393,7 @@ int usb_hcd_pci_resume (struct pci_dev *dev) dev->dev.power.power_state = PMSG_ON; - hcd->saw_irq = 0; + clear_bit(HCD_FLAG_SAW_IRQ, &hcd->flags); if (hcd->driver->resume) { retval = hcd->driver->resume(hcd); diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 5e5f65a475a..da24c31ee00 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -1315,11 +1315,12 @@ static int hcd_unlink_urb (struct urb *urb, int status) * finish unlinking the initial failed usb_set_address() * or device descriptor fetch. */ - if (!hcd->saw_irq && hcd->self.root_hub != urb->dev) { + if (!test_bit(HCD_FLAG_SAW_IRQ, &hcd->flags) + && hcd->self.root_hub != urb->dev) { dev_warn (hcd->self.controller, "Unlink after no-IRQ? " "Controller is probably using the wrong IRQ." "\n"); - hcd->saw_irq = 1; + set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags); } urb->status = status; @@ -1649,13 +1650,15 @@ irqreturn_t usb_hcd_irq (int irq, void *__hcd, struct pt_regs * r) struct usb_hcd *hcd = __hcd; int start = hcd->state; - if (start == HC_STATE_HALT) + if (unlikely(start == HC_STATE_HALT || + !test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))) return IRQ_NONE; if (hcd->driver->irq (hcd, r) == IRQ_NONE) return IRQ_NONE; - hcd->saw_irq = 1; - if (hcd->state == HC_STATE_HALT) + set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags); + + if (unlikely(hcd->state == HC_STATE_HALT)) usb_hc_died (hcd); return IRQ_HANDLED; } @@ -1768,6 +1771,8 @@ int usb_add_hcd(struct usb_hcd *hcd, dev_info(hcd->self.controller, "%s\n", hcd->product_desc); + set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); + /* till now HC has been in an indeterminate state ... */ if (hcd->driver->reset && (retval = hcd->driver->reset(hcd)) < 0) { dev_err(hcd->self.controller, "can't reset\n"); diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h index 24a62a2ff86..c8a1b350e2c 100644 --- a/drivers/usb/core/hcd.h +++ b/drivers/usb/core/hcd.h @@ -72,7 +72,12 @@ struct usb_hcd { /* usb_bus.hcpriv points to this */ * hardware info/state */ const struct hc_driver *driver; /* hw-specific hooks */ - unsigned saw_irq : 1; + + /* Flags that need to be manipulated atomically */ + unsigned long flags; +#define HCD_FLAG_HW_ACCESSIBLE 0x00000001 +#define HCD_FLAG_SAW_IRQ 0x00000002 + unsigned can_wakeup:1; /* hw supports wakeup? */ unsigned remote_wakeup:1;/* sw should use wakeup? */ unsigned rh_registered:1;/* is root hub registered? */ diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index 441c26064b4..13f73a836e4 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -121,8 +121,8 @@ static int ehci_pci_reinit(struct ehci_hcd *ehci, struct pci_dev *pdev) return 0; } -/* called by khubd or root hub (re)init threads; leaves HC in halt state */ -static int ehci_pci_reset(struct usb_hcd *hcd) +/* called during probe() after chip reset completes */ +static int ehci_pci_setup(struct usb_hcd *hcd) { struct ehci_hcd *ehci = hcd_to_ehci(hcd); struct pci_dev *pdev = to_pci_dev(hcd->self.controller); @@ -141,6 +141,11 @@ static int ehci_pci_reset(struct usb_hcd *hcd) if (retval) return retval; + /* data structure init */ + retval = ehci_init(hcd); + if (retval) + return retval; + /* NOTE: only the parts below this line are PCI-specific */ switch (pdev->vendor) { @@ -154,7 +159,8 @@ static int ehci_pci_reset(struct usb_hcd *hcd) /* AMD8111 EHCI doesn't work, according to AMD errata */ if (pdev->device == 0x7463) { ehci_info(ehci, "ignoring AMD8111 (errata)\n"); - return -EIO; + retval = -EIO; + goto done; } break; case PCI_VENDOR_ID_NVIDIA: @@ -207,9 +213,8 @@ static int ehci_pci_reset(struct usb_hcd *hcd) /* REVISIT: per-port wake capability (PCI 0x62) currently unused */ retval = ehci_pci_reinit(ehci, pdev); - - /* finish init */ - return ehci_init(hcd); +done: + return retval; } /*-------------------------------------------------------------------------*/ @@ -228,14 +233,36 @@ static int ehci_pci_reset(struct usb_hcd *hcd) static int ehci_pci_suspend(struct usb_hcd *hcd, pm_message_t message) { struct ehci_hcd *ehci = hcd_to_ehci(hcd); + unsigned long flags; + int rc = 0; if (time_before(jiffies, ehci->next_statechange)) msleep(10); + /* Root hub was already suspended. Disable irq emission and + * mark HW unaccessible, bail out if RH has been resumed. Use + * the spinlock to properly synchronize with possible pending + * RH suspend or resume activity. + * + * This is still racy as hcd->state is manipulated outside of + * any locks =P But that will be a different fix. + */ + spin_lock_irqsave (&ehci->lock, flags); + if (hcd->state != HC_STATE_SUSPENDED) { + rc = -EINVAL; + goto bail; + } + writel (0, &ehci->regs->intr_enable); + (void)readl(&ehci->regs->intr_enable); + + clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); + bail: + spin_unlock_irqrestore (&ehci->lock, flags); + // could save FLADJ in case of Vaux power loss // ... we'd only use it to handle clock skew - return 0; + return rc; } static int ehci_pci_resume(struct usb_hcd *hcd) @@ -251,6 +278,9 @@ static int ehci_pci_resume(struct usb_hcd *hcd) if (time_before(jiffies, ehci->next_statechange)) msleep(100); + /* Mark hardware accessible again as we are out of D3 state by now */ + set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); + /* If CF is clear, we lost PCI Vaux power and need to restart. */ if (readl(&ehci->regs->configured_flag) != FLAG_CF) goto restart; @@ -319,7 +349,7 @@ static const struct hc_driver ehci_pci_hc_driver = { /* * basic lifecycle operations */ - .reset = ehci_pci_reset, + .reset = ehci_pci_setup, .start = ehci_run, #ifdef CONFIG_PM .suspend = ehci_pci_suspend, diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c index 5bb872c3496..bf03ec0d8ee 100644 --- a/drivers/usb/host/ehci-q.c +++ b/drivers/usb/host/ehci-q.c @@ -912,6 +912,7 @@ submit_async ( int epnum; unsigned long flags; struct ehci_qh *qh = NULL; + int rc = 0; qtd = list_entry (qtd_list->next, struct ehci_qtd, qtd_list); epnum = ep->desc.bEndpointAddress; @@ -926,21 +927,28 @@ submit_async ( #endif spin_lock_irqsave (&ehci->lock, flags); + if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, + &ehci_to_hcd(ehci)->flags))) { + rc = -ESHUTDOWN; + goto done; + } + qh = qh_append_tds (ehci, urb, qtd_list, epnum, &ep->hcpriv); + if (unlikely(qh == NULL)) { + rc = -ENOMEM; + goto done; + } /* Control/bulk operations through TTs don't need scheduling, * the HC and TT handle it when the TT has a buffer ready. */ - if (likely (qh != NULL)) { - if (likely (qh->qh_state == QH_STATE_IDLE)) - qh_link_async (ehci, qh_get (qh)); - } + if (likely (qh->qh_state == QH_STATE_IDLE)) + qh_link_async (ehci, qh_get (qh)); + done: spin_unlock_irqrestore (&ehci->lock, flags); - if (unlikely (qh == NULL)) { + if (unlikely (qh == NULL)) qtd_list_free (ehci, urb, qtd_list); - return -ENOMEM; - } - return 0; + return rc; } /*-------------------------------------------------------------------------*/ diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c index f0c8aa1ccd5..57e77374d22 100644 --- a/drivers/usb/host/ehci-sched.c +++ b/drivers/usb/host/ehci-sched.c @@ -602,6 +602,12 @@ static int intr_submit ( spin_lock_irqsave (&ehci->lock, flags); + if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, + &ehci_to_hcd(ehci)->flags))) { + status = -ESHUTDOWN; + goto done; + } + /* get qh and force any scheduling errors */ INIT_LIST_HEAD (&empty); qh = qh_append_tds (ehci, urb, &empty, epnum, &ep->hcpriv); @@ -1456,7 +1462,11 @@ static int itd_submit (struct ehci_hcd *ehci, struct urb *urb, /* schedule ... need to lock */ spin_lock_irqsave (&ehci->lock, flags); - status = iso_stream_schedule (ehci, urb, stream); + if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, + &ehci_to_hcd(ehci)->flags))) + status = -ESHUTDOWN; + else + status = iso_stream_schedule (ehci, urb, stream); if (likely (status == 0)) itd_link_urb (ehci, urb, ehci->periodic_size << 3, stream); spin_unlock_irqrestore (&ehci->lock, flags); @@ -1815,7 +1825,11 @@ static int sitd_submit (struct ehci_hcd *ehci, struct urb *urb, /* schedule ... need to lock */ spin_lock_irqsave (&ehci->lock, flags); - status = iso_stream_schedule (ehci, urb, stream); + if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, + &ehci_to_hcd(ehci)->flags))) + status = -ESHUTDOWN; + else + status = iso_stream_schedule (ehci, urb, stream); if (status == 0) sitd_link_urb (ehci, urb, ehci->periodic_size << 3, stream); spin_unlock_irqrestore (&ehci->lock, flags); diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index 5c0c6c8a7a8..bf1d9abc07a 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -115,7 +115,7 @@ /*-------------------------------------------------------------------------*/ -// #define OHCI_VERBOSE_DEBUG /* not always helpful */ +#undef OHCI_VERBOSE_DEBUG /* not always helpful */ /* For initializing controller (mask in an HCFS mode too) */ #define OHCI_CONTROL_INIT OHCI_CTRL_CBSR @@ -253,6 +253,10 @@ static int ohci_urb_enqueue ( spin_lock_irqsave (&ohci->lock, flags); /* don't submit to a dead HC */ + if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) { + retval = -ENODEV; + goto fail; + } if (!HC_IS_RUNNING(hcd->state)) { retval = -ENODEV; goto fail; diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c index e01e77bc324..72e3b12a192 100644 --- a/drivers/usb/host/ohci-hub.c +++ b/drivers/usb/host/ohci-hub.c @@ -53,6 +53,11 @@ static int ohci_bus_suspend (struct usb_hcd *hcd) spin_lock_irqsave (&ohci->lock, flags); + if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))) { + spin_unlock_irqrestore (&ohci->lock, flags); + return -ESHUTDOWN; + } + ohci->hc_control = ohci_readl (ohci, &ohci->regs->control); switch (ohci->hc_control & OHCI_CTRL_HCFS) { case OHCI_USB_RESUME: @@ -140,11 +145,19 @@ static int ohci_bus_resume (struct usb_hcd *hcd) struct ohci_hcd *ohci = hcd_to_ohci (hcd); u32 temp, enables; int status = -EINPROGRESS; + unsigned long flags; if (time_before (jiffies, ohci->next_statechange)) msleep(5); - spin_lock_irq (&ohci->lock); + spin_lock_irqsave (&ohci->lock, flags); + + if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))) { + spin_unlock_irqrestore (&ohci->lock, flags); + return -ESHUTDOWN; + } + + ohci->hc_control = ohci_readl (ohci, &ohci->regs->control); if (ohci->hc_control & (OHCI_CTRL_IR | OHCI_SCHED_ENABLES)) { @@ -179,7 +192,7 @@ static int ohci_bus_resume (struct usb_hcd *hcd) ohci_dbg (ohci, "lost power\n"); status = -EBUSY; } - spin_unlock_irq (&ohci->lock); + spin_unlock_irqrestore (&ohci->lock, flags); if (status == -EBUSY) { (void) ohci_init (ohci); return ohci_restart (ohci); @@ -297,8 +310,8 @@ ohci_hub_status_data (struct usb_hcd *hcd, char *buf) /* handle autosuspended root: finish resuming before * letting khubd or root hub timer see state changes. */ - if ((ohci->hc_control & OHCI_CTRL_HCFS) != OHCI_USB_OPER - || !HC_IS_RUNNING(hcd->state)) { + if (unlikely((ohci->hc_control & OHCI_CTRL_HCFS) != OHCI_USB_OPER + || !HC_IS_RUNNING(hcd->state))) { can_suspend = 0; goto done; } @@ -508,6 +521,9 @@ static int ohci_hub_control ( u32 temp; int retval = 0; + if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))) + return -ESHUTDOWN; + switch (typeReq) { case ClearHubFeature: switch (wValue) { diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c index 5f22e6590cd..1b09dde068e 100644 --- a/drivers/usb/host/ohci-pci.c +++ b/drivers/usb/host/ohci-pci.c @@ -105,13 +105,36 @@ ohci_pci_start (struct usb_hcd *hcd) static int ohci_pci_suspend (struct usb_hcd *hcd, pm_message_t message) { - /* root hub was already suspended */ - return 0; + struct ohci_hcd *ohci = hcd_to_ohci (hcd); + unsigned long flags; + int rc = 0; + + /* Root hub was already suspended. Disable irq emission and + * mark HW unaccessible, bail out if RH has been resumed. Use + * the spinlock to properly synchronize with possible pending + * RH suspend or resume activity. + * + * This is still racy as hcd->state is manipulated outside of + * any locks =P But that will be a different fix. + */ + spin_lock_irqsave (&ohci->lock, flags); + if (hcd->state != HC_STATE_SUSPENDED) { + rc = -EINVAL; + goto bail; + } + ohci_writel(ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable); + (void)ohci_readl(ohci, &ohci->regs->intrdisable); + clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); + bail: + spin_unlock_irqrestore (&ohci->lock, flags); + + return rc; } static int ohci_pci_resume (struct usb_hcd *hcd) { + set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); usb_hcd_resume_root_hub(hcd); return 0; } diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c index d33ce3982a5..ed550132db0 100644 --- a/drivers/usb/host/uhci-hcd.c +++ b/drivers/usb/host/uhci-hcd.c @@ -717,6 +717,7 @@ static int uhci_suspend(struct usb_hcd *hcd, pm_message_t message) * at the source, so we must turn off PIRQ. */ pci_write_config_word(to_pci_dev(uhci_dev(uhci)), USBLEGSUP, 0); + clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); uhci->hc_inaccessible = 1; hcd->poll_rh = 0; @@ -733,6 +734,11 @@ static int uhci_resume(struct usb_hcd *hcd) dev_dbg(uhci_dev(uhci), "%s\n", __FUNCTION__); + /* We aren't in D3 state anymore, we do that even if dead as I + * really don't want to keep a stale HCD_FLAG_HW_ACCESSIBLE=0 + */ + set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); + if (uhci->rh_state == UHCI_RH_RESET) /* Dead */ return 0; spin_lock_irq(&uhci->lock); diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 25b6ca6ad08..3e470c8b419 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -534,6 +534,12 @@ config FB_SUN3 bool "Sun3 framebuffer support" depends on (FB = y) && (SUN3 || SUN3X) && BROKEN +config FB_SBUS + bool "SBUS and UPA framebuffers" + depends on (FB = y) && (SPARC32 || SPARC64) + help + Say Y if you want support for SBUS or UPA based frame buffer device. + config FB_BW2 bool "BWtwo support" depends on (FB = y) && ((SPARC32 || SPARC64) && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3) @@ -546,6 +552,7 @@ config FB_BW2 config FB_CG3 bool "CGthree support" depends on (FB = y) && ((SPARC32 || SPARC64) && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3) + select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT help @@ -1210,12 +1217,6 @@ config FB_AU1100 source "drivers/video/geode/Kconfig" -config FB_SBUS - bool "SBUS and UPA framebuffers" - depends on (FB = y) && (SPARC32 || SPARC64) - help - Say Y if you want support for SBUS or UPA based frame buffer device. - config FB_FFB bool "Creator/Creator3D/Elite3D support" depends on FB_SBUS && SPARC64 diff --git a/drivers/video/cirrusfb.c b/drivers/video/cirrusfb.c index 2858c5c8ba3..e0dbdfc0c8b 100644 --- a/drivers/video/cirrusfb.c +++ b/drivers/video/cirrusfb.c @@ -404,7 +404,7 @@ struct cirrusfb_info { struct cirrusfb_regs currentmode; int blank_mode; - u32 pseudo_palette[17]; + u32 pseudo_palette[16]; struct { u8 red, green, blue, pad; } palette[256]; #ifdef CONFIG_ZORRO @@ -1603,14 +1603,14 @@ static int cirrusfb_setcolreg (unsigned regno, unsigned red, unsigned green, switch (info->var.bits_per_pixel) { case 8: - ((u8*)(info->pseudo_palette))[regno] = v; + cinfo->pseudo_palette[regno] = v; break; case 16: - ((u16*)(info->pseudo_palette))[regno] = v; + cinfo->pseudo_palette[regno] = v; break; case 24: case 32: - ((u32*)(info->pseudo_palette))[regno] = v; + cinfo->pseudo_palette[regno] = v; break; } return 0; @@ -2020,18 +2020,21 @@ static void cirrusfb_prim_fillrect(struct cirrusfb_info *cinfo, const struct fb_fillrect *region) { int m; /* bytes per pixel */ + u32 color = (cinfo->info->fix.visual == FB_VISUAL_TRUECOLOR) ? + cinfo->pseudo_palette[region->color] : region->color; + if(cinfo->info->var.bits_per_pixel == 1) { cirrusfb_RectFill(cinfo->regbase, cinfo->info->var.bits_per_pixel, region->dx / 8, region->dy, region->width / 8, region->height, - region->color, + color, cinfo->currentmode.line_length); } else { m = ( cinfo->info->var.bits_per_pixel + 7 ) / 8; cirrusfb_RectFill(cinfo->regbase, cinfo->info->var.bits_per_pixel, region->dx * m, region->dy, region->width * m, region->height, - region->color, + color, cinfo->currentmode.line_length); } return; |