summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/amba/bus.c88
-rw-r--r--drivers/gpio/pl061.c4
-rw-r--r--drivers/leds/Kconfig9
-rw-r--r--drivers/leds/Makefile1
-rw-r--r--drivers/leds/leds-ns2.c338
-rw-r--r--drivers/media/video/Kconfig13
-rw-r--r--drivers/media/video/Makefile1
-rw-r--r--drivers/media/video/mx2_camera.c1513
-rw-r--r--drivers/misc/Kconfig10
-rw-r--r--drivers/misc/Makefile1
-rw-r--r--drivers/misc/arm-charlcd.c396
-rw-r--r--drivers/mmc/host/mmci.c148
-rw-r--r--drivers/mmc/host/mmci.h39
-rw-r--r--drivers/mmc/host/mxcmmc.c48
-rw-r--r--drivers/mtd/nand/mxc_nand.c33
-rw-r--r--drivers/net/phy/marvell.c38
-rw-r--r--drivers/parisc/led.c6
-rw-r--r--drivers/rtc/rtc-pl031.c2
-rw-r--r--drivers/serial/amba-pl010.c2
-rw-r--r--drivers/serial/amba-pl011.c90
-rw-r--r--drivers/usb/gadget/at91_udc.c205
-rw-r--r--drivers/usb/gadget/at91_udc.h3
-rw-r--r--drivers/usb/gadget/fsl_mxc_udc.c2
-rw-r--r--drivers/usb/host/ehci-mxc.c2
-rw-r--r--drivers/video/imxfb.c72
-rw-r--r--drivers/video/omap2/vram.c33
26 files changed, 2821 insertions, 276 deletions
diff --git a/drivers/amba/bus.c b/drivers/amba/bus.c
index f60b2b6a093..d31590e7011 100644
--- a/drivers/amba/bus.c
+++ b/drivers/amba/bus.c
@@ -122,6 +122,31 @@ static int __init amba_init(void)
postcore_initcall(amba_init);
+static int amba_get_enable_pclk(struct amba_device *pcdev)
+{
+ struct clk *pclk = clk_get(&pcdev->dev, "apb_pclk");
+ int ret;
+
+ pcdev->pclk = pclk;
+
+ if (IS_ERR(pclk))
+ return PTR_ERR(pclk);
+
+ ret = clk_enable(pclk);
+ if (ret)
+ clk_put(pclk);
+
+ return ret;
+}
+
+static void amba_put_disable_pclk(struct amba_device *pcdev)
+{
+ struct clk *pclk = pcdev->pclk;
+
+ clk_disable(pclk);
+ clk_put(pclk);
+}
+
/*
* These are the device model conversion veneers; they convert the
* device model structures to our more specific structures.
@@ -130,17 +155,33 @@ static int amba_probe(struct device *dev)
{
struct amba_device *pcdev = to_amba_device(dev);
struct amba_driver *pcdrv = to_amba_driver(dev->driver);
- struct amba_id *id;
+ struct amba_id *id = amba_lookup(pcdrv->id_table, pcdev);
+ int ret;
- id = amba_lookup(pcdrv->id_table, pcdev);
+ do {
+ ret = amba_get_enable_pclk(pcdev);
+ if (ret)
+ break;
+
+ ret = pcdrv->probe(pcdev, id);
+ if (ret == 0)
+ break;
- return pcdrv->probe(pcdev, id);
+ amba_put_disable_pclk(pcdev);
+ } while (0);
+
+ return ret;
}
static int amba_remove(struct device *dev)
{
+ struct amba_device *pcdev = to_amba_device(dev);
struct amba_driver *drv = to_amba_driver(dev->driver);
- return drv->remove(to_amba_device(dev));
+ int ret = drv->remove(pcdev);
+
+ amba_put_disable_pclk(pcdev);
+
+ return ret;
}
static void amba_shutdown(struct device *dev)
@@ -203,7 +244,6 @@ static void amba_device_release(struct device *dev)
*/
int amba_device_register(struct amba_device *dev, struct resource *parent)
{
- u32 pid, cid;
u32 size;
void __iomem *tmp;
int i, ret;
@@ -241,25 +281,35 @@ int amba_device_register(struct amba_device *dev, struct resource *parent)
goto err_release;
}
- /*
- * Read pid and cid based on size of resource
- * they are located at end of region
- */
- for (pid = 0, i = 0; i < 4; i++)
- pid |= (readl(tmp + size - 0x20 + 4 * i) & 255) << (i * 8);
- for (cid = 0, i = 0; i < 4; i++)
- cid |= (readl(tmp + size - 0x10 + 4 * i) & 255) << (i * 8);
+ ret = amba_get_enable_pclk(dev);
+ if (ret == 0) {
+ u32 pid, cid;
- iounmap(tmp);
+ /*
+ * Read pid and cid based on size of resource
+ * they are located at end of region
+ */
+ for (pid = 0, i = 0; i < 4; i++)
+ pid |= (readl(tmp + size - 0x20 + 4 * i) & 255) <<
+ (i * 8);
+ for (cid = 0, i = 0; i < 4; i++)
+ cid |= (readl(tmp + size - 0x10 + 4 * i) & 255) <<
+ (i * 8);
- if (cid == 0xb105f00d)
- dev->periphid = pid;
+ amba_put_disable_pclk(dev);
- if (!dev->periphid) {
- ret = -ENODEV;
- goto err_release;
+ if (cid == 0xb105f00d)
+ dev->periphid = pid;
+
+ if (!dev->periphid)
+ ret = -ENODEV;
}
+ iounmap(tmp);
+
+ if (ret)
+ goto err_release;
+
ret = device_add(&dev->dev);
if (ret)
goto err_release;
diff --git a/drivers/gpio/pl061.c b/drivers/gpio/pl061.c
index ee568c8fcbd..5005990f751 100644
--- a/drivers/gpio/pl061.c
+++ b/drivers/gpio/pl061.c
@@ -232,7 +232,7 @@ static void pl061_irq_handler(unsigned irq, struct irq_desc *desc)
desc->chip->unmask(irq);
}
-static int __init pl061_probe(struct amba_device *dev, struct amba_id *id)
+static int pl061_probe(struct amba_device *dev, struct amba_id *id)
{
struct pl061_platform_data *pdata;
struct pl061_gpio *chip;
@@ -333,7 +333,7 @@ free_mem:
return ret;
}
-static struct amba_id pl061_ids[] __initdata = {
+static struct amba_id pl061_ids[] = {
{
.id = 0x00041061,
.mask = 0x000fffff,
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 81bf25e67ce..e4112622e5a 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -302,6 +302,15 @@ config LEDS_MC13783
This option enable support for on-chip LED drivers found
on Freescale Semiconductor MC13783 PMIC.
+config LEDS_NS2
+ tristate "LED support for Network Space v2 GPIO LEDs"
+ depends on MACH_NETSPACE_V2 || MACH_INETSPACE_V2 || MACH_NETSPACE_MAX_V2
+ default y
+ help
+ This option enable support for the dual-GPIO LED found on the
+ Network Space v2 board (and parents). This include Internet Space v2,
+ Network Space (Max) v2 and d2 Network v2 boards.
+
config LEDS_TRIGGERS
bool "LED Trigger support"
help
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index 2493de49937..7d6b95831f8 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -37,6 +37,7 @@ obj-$(CONFIG_LEDS_LT3593) += leds-lt3593.o
obj-$(CONFIG_LEDS_ADP5520) += leds-adp5520.o
obj-$(CONFIG_LEDS_DELL_NETBOOKS) += dell-led.o
obj-$(CONFIG_LEDS_MC13783) += leds-mc13783.o
+obj-$(CONFIG_LEDS_NS2) += leds-ns2.o
# LED SPI Drivers
obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o
diff --git a/drivers/leds/leds-ns2.c b/drivers/leds/leds-ns2.c
new file mode 100644
index 00000000000..74dce4ba026
--- /dev/null
+++ b/drivers/leds/leds-ns2.c
@@ -0,0 +1,338 @@
+/*
+ * leds-ns2.c - Driver for the Network Space v2 (and parents) dual-GPIO LED
+ *
+ * Copyright (C) 2010 LaCie
+ *
+ * Author: Simon Guinot <sguinot@lacie.com>
+ *
+ * Based on leds-gpio.c by Raphael Assenat <raph@8d.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <mach/leds-ns2.h>
+
+/*
+ * The Network Space v2 dual-GPIO LED is wired to a CPLD and can blink in
+ * relation with the SATA activity. This capability is exposed through the
+ * "sata" sysfs attribute.
+ *
+ * The following array detail the different LED registers and the combination
+ * of their possible values:
+ *
+ * cmd_led | slow_led | /SATA active | LED state
+ * | | |
+ * 1 | 0 | x | off
+ * - | 1 | x | on
+ * 0 | 0 | 1 | on
+ * 0 | 0 | 0 | blink (rate 300ms)
+ */
+
+enum ns2_led_modes {
+ NS_V2_LED_OFF,
+ NS_V2_LED_ON,
+ NS_V2_LED_SATA,
+};
+
+struct ns2_led_mode_value {
+ enum ns2_led_modes mode;
+ int cmd_level;
+ int slow_level;
+};
+
+static struct ns2_led_mode_value ns2_led_modval[] = {
+ { NS_V2_LED_OFF , 1, 0 },
+ { NS_V2_LED_ON , 0, 1 },
+ { NS_V2_LED_ON , 1, 1 },
+ { NS_V2_LED_SATA, 0, 0 },
+};
+
+struct ns2_led_data {
+ struct led_classdev cdev;
+ unsigned cmd;
+ unsigned slow;
+ unsigned char sata; /* True when SATA mode active. */
+ rwlock_t rw_lock; /* Lock GPIOs. */
+};
+
+static int ns2_led_get_mode(struct ns2_led_data *led_dat,
+ enum ns2_led_modes *mode)
+{
+ int i;
+ int ret = -EINVAL;
+ int cmd_level;
+ int slow_level;
+
+ read_lock(&led_dat->rw_lock);
+
+ cmd_level = gpio_get_value(led_dat->cmd);
+ slow_level = gpio_get_value(led_dat->slow);
+
+ for (i = 0; i < ARRAY_SIZE(ns2_led_modval); i++) {
+ if (cmd_level == ns2_led_modval[i].cmd_level &&
+ slow_level == ns2_led_modval[i].slow_level) {
+ *mode = ns2_led_modval[i].mode;
+ ret = 0;
+ break;
+ }
+ }
+
+ read_unlock(&led_dat->rw_lock);
+
+ return ret;
+}
+
+static void ns2_led_set_mode(struct ns2_led_data *led_dat,
+ enum ns2_led_modes mode)
+{
+ int i;
+
+ write_lock(&led_dat->rw_lock);
+
+ for (i = 0; i < ARRAY_SIZE(ns2_led_modval); i++) {
+ if (mode == ns2_led_modval[i].mode) {
+ gpio_set_value(led_dat->cmd,
+ ns2_led_modval[i].cmd_level);
+ gpio_set_value(led_dat->slow,
+ ns2_led_modval[i].slow_level);
+ }
+ }
+
+ write_unlock(&led_dat->rw_lock);
+}
+
+static void ns2_led_set(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ struct ns2_led_data *led_dat =
+ container_of(led_cdev, struct ns2_led_data, cdev);
+ enum ns2_led_modes mode;
+
+ if (value == LED_OFF)
+ mode = NS_V2_LED_OFF;
+ else if (led_dat->sata)
+ mode = NS_V2_LED_SATA;
+ else
+ mode = NS_V2_LED_ON;
+
+ ns2_led_set_mode(led_dat, mode);
+}
+
+static ssize_t ns2_led_sata_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buff, size_t count)
+{
+ int ret;
+ unsigned long enable;
+ enum ns2_led_modes mode;
+ struct ns2_led_data *led_dat = dev_get_drvdata(dev);
+
+ ret = strict_strtoul(buff, 10, &enable);
+ if (ret < 0)
+ return ret;
+
+ enable = !!enable;
+
+ if (led_dat->sata == enable)
+ return count;
+
+ ret = ns2_led_get_mode(led_dat, &mode);
+ if (ret < 0)
+ return ret;
+
+ if (enable && mode == NS_V2_LED_ON)
+ ns2_led_set_mode(led_dat, NS_V2_LED_SATA);
+ if (!enable && mode == NS_V2_LED_SATA)
+ ns2_led_set_mode(led_dat, NS_V2_LED_ON);
+
+ led_dat->sata = enable;
+
+ return count;
+}
+
+static ssize_t ns2_led_sata_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct ns2_led_data *led_dat = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%d\n", led_dat->sata);
+}
+
+static DEVICE_ATTR(sata, 0644, ns2_led_sata_show, ns2_led_sata_store);
+
+static int __devinit
+create_ns2_led(struct platform_device *pdev, struct ns2_led_data *led_dat,
+ const struct ns2_led *template)
+{
+ int ret;
+ enum ns2_led_modes mode;
+
+ ret = gpio_request(template->cmd, template->name);
+ if (ret == 0) {
+ ret = gpio_direction_output(template->cmd,
+ gpio_get_value(template->cmd));
+ if (ret)
+ gpio_free(template->cmd);
+ }
+ if (ret) {
+ dev_err(&pdev->dev, "%s: failed to setup command GPIO\n",
+ template->name);
+ }
+
+ ret = gpio_request(template->slow, template->name);
+ if (ret == 0) {
+ ret = gpio_direction_output(template->slow,
+ gpio_get_value(template->slow));
+ if (ret)
+ gpio_free(template->slow);
+ }
+ if (ret) {
+ dev_err(&pdev->dev, "%s: failed to setup slow GPIO\n",
+ template->name);
+ goto err_free_cmd;
+ }
+
+ rwlock_init(&led_dat->rw_lock);
+
+ led_dat->cdev.name = template->name;
+ led_dat->cdev.default_trigger = template->default_trigger;
+ led_dat->cdev.blink_set = NULL;
+ led_dat->cdev.brightness_set = ns2_led_set;
+ led_dat->cdev.flags |= LED_CORE_SUSPENDRESUME;
+ led_dat->cmd = template->cmd;
+ led_dat->slow = template->slow;
+
+ ret = ns2_led_get_mode(led_dat, &mode);
+ if (ret < 0)
+ goto err_free_slow;
+
+ /* Set LED initial state. */
+ led_dat->sata = (mode == NS_V2_LED_SATA) ? 1 : 0;
+ led_dat->cdev.brightness =
+ (mode == NS_V2_LED_OFF) ? LED_OFF : LED_FULL;
+
+ ret = led_classdev_register(&pdev->dev, &led_dat->cdev);
+ if (ret < 0)
+ goto err_free_slow;
+
+ dev_set_drvdata(led_dat->cdev.dev, led_dat);
+ ret = device_create_file(led_dat->cdev.dev, &dev_attr_sata);
+ if (ret < 0)
+ goto err_free_cdev;
+
+ return 0;
+
+err_free_cdev:
+ led_classdev_unregister(&led_dat->cdev);
+err_free_slow:
+ gpio_free(led_dat->slow);
+err_free_cmd:
+ gpio_free(led_dat->cmd);
+
+ return ret;
+}
+
+static void __devexit delete_ns2_led(struct ns2_led_data *led_dat)
+{
+ device_remove_file(led_dat->cdev.dev, &dev_attr_sata);
+ led_classdev_unregister(&led_dat->cdev);
+ gpio_free(led_dat->cmd);
+ gpio_free(led_dat->slow);
+}
+
+static int __devinit ns2_led_probe(struct platform_device *pdev)
+{
+ struct ns2_led_platform_data *pdata = pdev->dev.platform_data;
+ struct ns2_led_data *leds_data;
+ int i;
+ int ret;
+
+ if (!pdata)
+ return -EINVAL;
+
+ leds_data = kzalloc(sizeof(struct ns2_led_data) *
+ pdata->num_leds, GFP_KERNEL);
+ if (!leds_data)
+ return -ENOMEM;
+
+ for (i = 0; i < pdata->num_leds; i++) {
+ ret = create_ns2_led(pdev, &leds_data[i], &pdata->leds[i]);
+ if (ret < 0)
+ goto err;
+
+ }
+
+ platform_set_drvdata(pdev, leds_data);
+
+ return 0;
+
+err:
+ for (i = i - 1; i >= 0; i--)
+ delete_ns2_led(&leds_data[i]);
+
+ kfree(leds_data);
+
+ return ret;
+}
+
+static int __devexit ns2_led_remove(struct platform_device *pdev)
+{
+ int i;
+ struct ns2_led_platform_data *pdata = pdev->dev.platform_data;
+ struct ns2_led_data *leds_data;
+
+ leds_data = platform_get_drvdata(pdev);
+
+ for (i = 0; i < pdata->num_leds; i++)
+ delete_ns2_led(&leds_data[i]);
+
+ kfree(leds_data);
+ platform_set_drvdata(pdev, NULL);
+
+ return 0;
+}
+
+static struct platform_driver ns2_led_driver = {
+ .probe = ns2_led_probe,
+ .remove = __devexit_p(ns2_led_remove),
+ .driver = {
+ .name = "leds-ns2",
+ .owner = THIS_MODULE,
+ },
+};
+MODULE_ALIAS("platform:leds-ns2");
+
+static int __init ns2_led_init(void)
+{
+ return platform_driver_register(&ns2_led_driver);
+}
+
+static void __exit ns2_led_exit(void)
+{
+ platform_driver_unregister(&ns2_led_driver);
+}
+
+module_init(ns2_led_init);
+module_exit(ns2_led_exit);
+
+MODULE_AUTHOR("Simon Guinot <sguinot@lacie.com>");
+MODULE_DESCRIPTION("Network Space v2 LED driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index bdbc9d30541..27e2acce3c3 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -969,6 +969,19 @@ config VIDEO_OMAP2
---help---
This is a v4l2 driver for the TI OMAP2 camera capture interface
+config VIDEO_MX2_HOSTSUPPORT
+ bool
+
+config VIDEO_MX2
+ tristate "i.MX27/i.MX25 Camera Sensor Interface driver"
+ depends on VIDEO_DEV && SOC_CAMERA && (MACH_MX27 || ARCH_MX25)
+ select VIDEOBUF_DMA_CONTIG
+ select VIDEO_MX2_HOSTSUPPORT
+ ---help---
+ This is a v4l2 driver for the i.MX27 and the i.MX25 Camera Sensor
+ Interface
+
+
#
# USB Multimedia device configuration
#
diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
index cc93859d316..b08bd2b65cd 100644
--- a/drivers/media/video/Makefile
+++ b/drivers/media/video/Makefile
@@ -162,6 +162,7 @@ obj-$(CONFIG_SOC_CAMERA) += soc_camera.o soc_mediabus.o
obj-$(CONFIG_SOC_CAMERA_PLATFORM) += soc_camera_platform.o
# soc-camera host drivers have to be linked after camera drivers
obj-$(CONFIG_VIDEO_MX1) += mx1_camera.o
+obj-$(CONFIG_VIDEO_MX2) += mx2_camera.o
obj-$(CONFIG_VIDEO_MX3) += mx3_camera.o
obj-$(CONFIG_VIDEO_PXA27x) += pxa_camera.o
obj-$(CONFIG_VIDEO_SH_MOBILE_CEU) += sh_mobile_ceu_camera.o
diff --git a/drivers/media/video/mx2_camera.c b/drivers/media/video/mx2_camera.c
new file mode 100644
index 00000000000..026bef0ba40
--- /dev/null
+++ b/drivers/media/video/mx2_camera.c
@@ -0,0 +1,1513 @@
+/*
+ * V4L2 Driver for i.MX27/i.MX25 camera host
+ *
+ * Copyright (C) 2008, Sascha Hauer, Pengutronix
+ * Copyright (C) 2010, Baruch Siach, Orex Computed Radiography
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/dma-mapping.h>
+#include <linux/errno.h>
+#include <linux/fs.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/moduleparam.h>
+#include <linux/time.h>
+#include <linux/version.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/mutex.h>
+#include <linux/clk.h>
+
+#include <media/v4l2-common.h>
+#include <media/v4l2-dev.h>
+#include <media/videobuf-dma-contig.h>
+#include <media/soc_camera.h>
+#include <media/soc_mediabus.h>
+
+#include <linux/videodev2.h>
+
+#include <mach/mx2_cam.h>
+#ifdef CONFIG_MACH_MX27
+#include <mach/dma-mx1-mx2.h>
+#endif
+#include <mach/hardware.h>
+
+#include <asm/dma.h>
+
+#define MX2_CAM_DRV_NAME "mx2-camera"
+#define MX2_CAM_VERSION_CODE KERNEL_VERSION(0, 0, 5)
+#define MX2_CAM_DRIVER_DESCRIPTION "i.MX2x_Camera"
+
+/* reset values */
+#define CSICR1_RESET_VAL 0x40000800
+#define CSICR2_RESET_VAL 0x0
+#define CSICR3_RESET_VAL 0x0
+
+/* csi control reg 1 */
+#define CSICR1_SWAP16_EN (1 << 31)
+#define CSICR1_EXT_VSYNC (1 << 30)
+#define CSICR1_EOF_INTEN (1 << 29)
+#define CSICR1_PRP_IF_EN (1 << 28)
+#define CSICR1_CCIR_MODE (1 << 27)
+#define CSICR1_COF_INTEN (1 << 26)
+#define CSICR1_SF_OR_INTEN (1 << 25)
+#define CSICR1_RF_OR_INTEN (1 << 24)
+#define CSICR1_STATFF_LEVEL (3 << 22)
+#define CSICR1_STATFF_INTEN (1 << 21)
+#define CSICR1_RXFF_LEVEL(l) (((l) & 3) << 19) /* MX27 */
+#define CSICR1_FB2_DMA_INTEN (1 << 20) /* MX25 */
+#define CSICR1_FB1_DMA_INTEN (1 << 19) /* MX25 */
+#define CSICR1_RXFF_INTEN (1 << 18)
+#define CSICR1_SOF_POL (1 << 17)
+#define CSICR1_SOF_INTEN (1 << 16)
+#define CSICR1_MCLKDIV(d) (((d) & 0xF) << 12)
+#define CSICR1_HSYNC_POL (1 << 11)
+#define CSICR1_CCIR_EN (1 << 10)
+#define CSICR1_MCLKEN (1 << 9)
+#define CSICR1_FCC (1 << 8)
+#define CSICR1_PACK_DIR (1 << 7)
+#define CSICR1_CLR_STATFIFO (1 << 6)
+#define CSICR1_CLR_RXFIFO (1 << 5)
+#define CSICR1_GCLK_MODE (1 << 4)
+#define CSICR1_INV_DATA (1 << 3)
+#define CSICR1_INV_PCLK (1 << 2)
+#define CSICR1_REDGE (1 << 1)
+
+#define SHIFT_STATFF_LEVEL 22
+#define SHIFT_RXFF_LEVEL 19
+#define SHIFT_MCLKDIV 12
+
+/* control reg 3 */
+#define CSICR3_FRMCNT (0xFFFF << 16)
+#define CSICR3_FRMCNT_RST (1 << 15)
+#define CSICR3_DMA_REFLASH_RFF (1 << 14)
+#define CSICR3_DMA_REFLASH_SFF (1 << 13)
+#define CSICR3_DMA_REQ_EN_RFF (1 << 12)
+#define CSICR3_DMA_REQ_EN_SFF (1 << 11)
+#define CSICR3_RXFF_LEVEL(l) (((l) & 7) << 4) /* MX25 */
+#define CSICR3_CSI_SUP (1 << 3)
+#define CSICR3_ZERO_PACK_EN (1 << 2)
+#define CSICR3_ECC_INT_EN (1 << 1)
+#define CSICR3_ECC_AUTO_EN (1 << 0)
+
+#define SHIFT_FRMCNT 16
+
+/* csi status reg */
+#define CSISR_SFF_OR_INT (1 << 25)
+#define CSISR_RFF_OR_INT (1 << 24)
+#define CSISR_STATFF_INT (1 << 21)
+#define CSISR_DMA_TSF_FB2_INT (1 << 20) /* MX25 */
+#define CSISR_DMA_TSF_FB1_INT (1 << 19) /* MX25 */
+#define CSISR_RXFF_INT (1 << 18)
+#define CSISR_EOF_INT (1 << 17)
+#define CSISR_SOF_INT (1 << 16)
+#define CSISR_F2_INT (1 << 15)
+#define CSISR_F1_INT (1 << 14)
+#define CSISR_COF_INT (1 << 13)
+#define CSISR_ECC_INT (1 << 1)
+#define CSISR_DRDY (1 << 0)
+
+#define CSICR1 0x00
+#define CSICR2 0x04
+#define CSISR (cpu_is_mx27() ? 0x08 : 0x18)
+#define CSISTATFIFO 0x0c
+#define CSIRFIFO 0x10
+#define CSIRXCNT 0x14
+#define CSICR3 (cpu_is_mx27() ? 0x1C : 0x08)
+#define CSIDMASA_STATFIFO 0x20
+#define CSIDMATA_STATFIFO 0x24
+#define CSIDMASA_FB1 0x28
+#define CSIDMASA_FB2 0x2c
+#define CSIFBUF_PARA 0x30
+#define CSIIMAG_PARA 0x34
+
+/* EMMA PrP */
+#define PRP_CNTL 0x00
+#define PRP_INTR_CNTL 0x04
+#define PRP_INTRSTATUS 0x08
+#define PRP_SOURCE_Y_PTR 0x0c
+#define PRP_SOURCE_CB_PTR 0x10
+#define PRP_SOURCE_CR_PTR 0x14
+#define PRP_DEST_RGB1_PTR 0x18
+#define PRP_DEST_RGB2_PTR 0x1c
+#define PRP_DEST_Y_PTR 0x20
+#define PRP_DEST_CB_PTR 0x24
+#define PRP_DEST_CR_PTR 0x28
+#define PRP_SRC_FRAME_SIZE 0x2c
+#define PRP_DEST_CH1_LINE_STRIDE 0x30
+#define PRP_SRC_PIXEL_FORMAT_CNTL 0x34
+#define PRP_CH1_PIXEL_FORMAT_CNTL 0x38
+#define PRP_CH1_OUT_IMAGE_SIZE 0x3c
+#define PRP_CH2_OUT_IMAGE_SIZE 0x40
+#define PRP_SRC_LINE_STRIDE 0x44
+#define PRP_CSC_COEF_012 0x48
+#define PRP_CSC_COEF_345 0x4c
+#define PRP_CSC_COEF_678 0x50
+#define PRP_CH1_RZ_HORI_COEF1 0x54
+#define PRP_CH1_RZ_HORI_COEF2 0x58
+#define PRP_CH1_RZ_HORI_VALID 0x5c
+#define PRP_CH1_RZ_VERT_COEF1 0x60
+#define PRP_CH1_RZ_VERT_COEF2 0x64
+#define PRP_CH1_RZ_VERT_VALID 0x68
+#define PRP_CH2_RZ_HORI_COEF1 0x6c
+#define PRP_CH2_RZ_HORI_COEF2 0x70
+#define PRP_CH2_RZ_HORI_VALID 0x74
+#define PRP_CH2_RZ_VERT_COEF1 0x78
+#define PRP_CH2_RZ_VERT_COEF2 0x7c
+#define PRP_CH2_RZ_VERT_VALID 0x80
+
+#define PRP_CNTL_CH1EN (1 << 0)
+#define PRP_CNTL_CH2EN (1 << 1)
+#define PRP_CNTL_CSIEN (1 << 2)
+#define PRP_CNTL_DATA_IN_YUV420 (0 << 3)
+#define PRP_CNTL_DATA_IN_YUV422 (1 << 3)
+#define PRP_CNTL_DATA_IN_RGB16 (2 << 3)
+#define PRP_CNTL_DATA_IN_RGB32 (3 << 3)
+#define PRP_CNTL_CH1_OUT_RGB8 (0 << 5)
+#define PRP_CNTL_CH1_OUT_RGB16 (1 << 5)
+#define PRP_CNTL_CH1_OUT_RGB32 (2 << 5)
+#define PRP_CNTL_CH1_OUT_YUV422 (3 << 5)
+#define PRP_CNTL_CH2_OUT_YUV420 (0 << 7)
+#define PRP_CNTL_CH2_OUT_YUV422 (1 << 7)
+#define PRP_CNTL_CH2_OUT_YUV444 (2 << 7)
+#define PRP_CNTL_CH1_LEN (1 << 9)
+#define PRP_CNTL_CH2_LEN (1 << 10)
+#define PRP_CNTL_SKIP_FRAME (1 << 11)
+#define PRP_CNTL_SWRST (1 << 12)
+#define PRP_CNTL_CLKEN (1 << 13)
+#define PRP_CNTL_WEN (1 << 14)
+#define PRP_CNTL_CH1BYP (1 << 15)
+#define PRP_CNTL_IN_TSKIP(x) ((x) << 16)
+#define PRP_CNTL_CH1_TSKIP(x) ((x) << 19)
+#define PRP_CNTL_CH2_TSKIP(x) ((x) << 22)
+#define PRP_CNTL_INPUT_FIFO_LEVEL(x) ((x) << 25)
+#define PRP_CNTL_RZ_FIFO_LEVEL(x) ((x) << 27)
+#define PRP_CNTL_CH2B1EN (1 << 29)
+#define PRP_CNTL_CH2B2EN (1 << 30)
+#define PRP_CNTL_CH2FEN (1 << 31)
+
+/* IRQ Enable and status register */
+#define PRP_INTR_RDERR (1 << 0)
+#define PRP_INTR_CH1WERR (1 << 1)
+#define PRP_INTR_CH2WERR (1 << 2)
+#define PRP_INTR_CH1FC (1 << 3)
+#define PRP_INTR_CH2FC (1 << 5)
+#define PRP_INTR_LBOVF (1 << 7)
+#define PRP_INTR_CH2OVF (1 << 8)
+
+#define mx27_camera_emma(pcdev) (cpu_is_mx27() && pcdev->use_emma)
+
+#define MAX_VIDEO_MEM 16
+
+struct mx2_camera_dev {
+ struct device *dev;
+ struct soc_camera_host soc_host;
+ struct soc_camera_device *icd;
+ struct clk *clk_csi, *clk_emma;
+
+ unsigned int irq_csi, irq_emma;
+ void __iomem *base_csi, *base_emma;
+ unsigned long base_dma;
+
+ struct mx2_camera_platform_data *pdata;
+ struct resource *res_csi, *res_emma;
+ unsigned long platform_flags;
+
+ struct list_head capture;
+ struct list_head active_bufs;
+
+ spinlock_t lock;
+
+ int dma;
+ struct mx2_buffer *active;
+ struct mx2_buffer *fb1_active;
+ struct mx2_buffer *fb2_active;
+
+ int use_emma;
+
+ u32 csicr1;
+
+ void *discard_buffer;
+ dma_addr_t discard_buffer_dma;
+ size_t discard_size;
+};
+
+/* buffer for one video frame */
+struct mx2_buffer {
+ /* common v4l buffer stuff -- must be first */
+ struct videobuf_buffer vb;
+
+ enum v4l2_mbus_pixelcode code;
+
+ int bufnum;
+};
+
+static void mx2_camera_deactivate(struct mx2_camera_dev *pcdev)
+{
+ unsigned long flags;
+
+ clk_disable(pcdev->clk_csi);
+ writel(0, pcdev->base_csi + CSICR1);
+ if (mx27_camera_emma(pcdev)) {
+ writel(0, pcdev->base_emma + PRP_CNTL);
+ } else if (cpu_is_mx25()) {
+ spin_lock_irqsave(&pcdev->lock, flags);
+ pcdev->fb1_active = NULL;
+ pcdev->fb2_active = NULL;
+ writel(0, pcdev->base_csi + CSIDMASA_FB1);
+ writel(0, pcdev->base_csi + CSIDMASA_FB2);
+ spin_unlock_irqrestore(&pcdev->lock, flags);
+ }
+}
+
+/*
+ * The following two functions absolutely depend on the fact, that
+ * there can be only one camera on mx2 camera sensor interface
+ */
+static int mx2_camera_add_device(struct soc_camera_device *icd)
+{
+ struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+ struct mx2_camera_dev *pcdev = ici->priv;
+ int ret;
+ u32 csicr1;
+
+ if (pcdev->icd)
+ return -EBUSY;
+
+ ret = clk_enable(pcdev->clk_csi);
+ if (ret < 0)
+ return ret;
+
+ csicr1 = CSICR1_MCLKEN;
+
+ if (mx27_camera_emma(pcdev)) {
+ csicr1 |= CSICR1_PRP_IF_EN | CSICR1_FCC |
+ CSICR1_RXFF_LEVEL(0);
+ } else if (cpu_is_mx27())
+ csicr1 |= CSICR1_SOF_INTEN | CSICR1_RXFF_LEVEL(2);
+
+ pcdev->csicr1 = csicr1;
+ writel(pcdev->csicr1, pcdev->base_csi + CSICR1);
+
+ pcdev->icd = icd;
+
+ dev_info(icd->dev.parent, "Camera driver attached to camera %d\n",
+ icd->devnum);
+
+ return 0;
+}
+
+static void mx2_camera_remove_device(struct soc_camera_device *icd)
+{
+ struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+ struct mx2_camera_dev *pcdev = ici->priv;
+
+ BUG_ON(icd != pcdev->icd);
+
+ dev_info(icd->dev.parent, "Camera driver detached from camera %d\n",
+ icd->devnum);
+
+ mx2_camera_deactivate(pcdev);
+
+ if (pcdev->discard_buffer) {
+ dma_free_coherent(ici->v4l2_dev.dev, pcdev->discard_size,
+ pcdev->discard_buffer,
+ pcdev->discard_buffer_dma);
+ pcdev->discard_buffer = NULL;
+ }
+
+ pcdev->icd = NULL;
+}
+
+#ifdef CONFIG_MACH_MX27
+static void mx27_camera_dma_enable(struct mx2_camera_dev *pcdev)
+{
+ u32 tmp;
+
+ imx_dma_enable(pcdev->dma);
+
+ tmp = readl(pcdev->base_csi + CSICR1);
+ tmp |= CSICR1_RF_OR_INTEN;
+ writel(tmp, pcdev->base_csi + CSICR1);
+}
+
+static irqreturn_t mx27_camera_irq(int irq_csi, void *data)
+{
+ struct mx2_camera_dev *pcdev = data;
+ u32 status = readl(pcdev->base_csi + CSISR);
+
+ if (status & CSISR_SOF_INT && pcdev->active) {
+ u32 tmp;
+
+ tmp = readl(pcdev->base_csi + CSICR1);
+ writel(tmp | CSICR1_CLR_RXFIFO, pcdev->base_csi + CSICR1);
+ mx27_camera_dma_enable(pcdev);
+ }
+
+ writel(CSISR_SOF_INT | CSISR_RFF_OR_INT, pcdev->base_csi + CSISR);
+
+ return IRQ_HANDLED;
+}
+#else
+static irqreturn_t mx27_camera_irq(int irq_csi, void *data)
+{
+ return IRQ_NONE;
+}
+#endif /* CONFIG_MACH_MX27 */
+
+static void mx25_camera_frame_done(struct mx2_camera_dev *pcdev, int fb,
+ int state)
+{
+ struct videobuf_buffer *vb;
+ struct mx2_buffer *buf;
+ struct mx2_buffer **fb_active = fb == 1 ? &pcdev->fb1_active :
+ &pcdev->fb2_active;
+ u32 fb_reg = fb == 1 ? CSIDMASA_FB1 : CSIDMASA_FB2;
+ unsigned long flags;
+
+ spin_lock_irqsave(&pcdev->lock, flags);
+
+ vb = &(*fb_active)->vb;
+ dev_dbg(pcdev->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
+ vb, vb->baddr, vb->bsize);
+
+ vb->state = state;
+ do_gettimeofday(&vb->ts);
+ vb->field_count++;
+
+ wake_up(&vb->done);
+
+ if (list_empty(&pcdev->capture)) {
+ buf = NULL;
+ writel(0, pcdev->base_csi + fb_reg);
+ } else {
+ buf = list_entry(pcdev->capture.next, struct mx2_buffer,
+ vb.queue);
+ vb = &buf->vb;
+ list_del(&vb->queue);
+ vb->state = VIDEOBUF_ACTIVE;
+ writel(videobuf_to_dma_contig(vb), pcdev->base_csi + fb_reg);
+ }
+
+ *fb_active = buf;
+
+ spin_unlock_irqrestore(&pcdev->lock, flags);
+}
+
+static irqreturn_t mx25_camera_irq(int irq_csi, void *data)
+{
+ struct mx2_camera_dev *pcdev = data;
+ u32 status = readl(pcdev->base_csi + CSISR);
+
+ if (status & CSISR_DMA_TSF_FB1_INT)
+ mx25_camera_frame_done(pcdev, 1, VIDEOBUF_DONE);
+ else if (status & CSISR_DMA_TSF_FB2_INT)
+ mx25_camera_frame_done(pcdev, 2, VIDEOBUF_DONE);
+
+ /* FIXME: handle CSISR_RFF_OR_INT */
+
+ writel(status, pcdev->base_csi + CSISR);
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * Videobuf operations
+ */
+static int mx2_videobuf_setup(struct videobuf_queue *vq, unsigned int *count,
+ unsigned int *size)
+{
+ struct soc_camera_device *icd = vq->priv_data;
+ int bytes_per_line = soc_mbus_bytes_per_line(icd->user_width,
+ icd->current_fmt->host_fmt);
+
+ dev_dbg(&icd->dev, "count=%d, size=%d\n", *count, *size);
+
+ if (bytes_per_line < 0)
+ return bytes_per_line;
+
+ *size = bytes_per_line * icd->user_height;
+
+ if (0 == *count)
+ *count = 32;
+ if (*size * *count > MAX_VIDEO_MEM * 1024 * 1024)
+ *count = (MAX_VIDEO_MEM * 1024 * 1024) / *size;
+
+ return 0;
+}
+
+static void free_buffer(struct videobuf_queue *vq, struct mx2_buffer *buf)
+{
+ struct soc_camera_device *icd = vq->priv_data;
+ struct videobuf_buffer *vb = &buf->vb;
+
+ dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
+ vb, vb->baddr, vb->bsize);
+
+ /*
+ * This waits until this buffer is out of danger, i.e., until it is no
+ * longer in STATE_QUEUED or STATE_ACTIVE
+ */
+ videobuf_waiton(vb, 0, 0);
+
+ videobuf_dma_contig_free(vq, vb);
+ dev_dbg(&icd->dev, "%s freed\n", __func__);
+
+ vb->state = VIDEOBUF_NEEDS_INIT;
+}
+
+static int mx2_videobuf_prepare(struct videobuf_queue *vq,
+ struct videobuf_buffer *vb, enum v4l2_field field)
+{
+ struct soc_camera_device *icd = vq->priv_data;
+ struct mx2_buffer *buf = container_of(vb, struct mx2_buffer, vb);
+ int bytes_per_line = soc_mbus_bytes_per_line(icd->user_width,
+ icd->current_fmt->host_fmt);
+ int ret = 0;
+
+ dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
+ vb, vb->baddr, vb->bsize);
+
+ if (bytes_per_line < 0)
+ return bytes_per_line;
+
+#ifdef DEBUG
+ /*
+ * This can be useful if you want to see if we actually fill
+ * the buffer with something
+ */
+ memset((void *)vb->baddr, 0xaa, vb->bsize);
+#endif
+
+ if (buf->code != icd->current_fmt->code ||
+ vb->width != icd->user_width ||
+ vb->height != icd->user_height ||
+ vb->field != field) {
+ buf->code = icd->current_fmt->code;
+ vb->width = icd->user_width;
+ vb->height = icd->user_height;
+ vb->field = field;
+ vb->state = VIDEOBUF_NEEDS_INIT;
+ }
+
+ vb->size = bytes_per_line * vb->height;
+ if (vb->baddr && vb->bsize < vb->size) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ if (vb->state == VIDEOBUF_NEEDS_INIT) {
+ ret = videobuf_iolock(vq, vb, NULL);
+ if (ret)
+ goto fail;
+
+ vb->state = VIDEOBUF_PREPARED;
+ }
+
+ return 0;
+
+fail:
+ free_buffer(vq, buf);
+out:
+ return ret;
+}
+
+static void mx2_videobuf_queue(struct videobuf_queue *vq,
+ struct videobuf_buffer *vb)
+{
+ struct soc_camera_device *icd = vq->priv_data;
+ struct soc_camera_host *ici =
+ to_soc_camera_host(icd->dev.parent);
+ struct mx2_camera_dev *pcdev = ici->priv;
+ struct mx2_buffer *buf = container_of(vb, struct mx2_buffer, vb);
+ unsigned long flags;
+
+ dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
+ vb, vb->baddr, vb->bsize);
+
+ spin_lock_irqsave(&pcdev->lock, flags);
+
+ vb->state = VIDEOBUF_QUEUED;
+ list_add_tail(&vb->queue, &pcdev->capture);
+
+ if (mx27_camera_emma(pcdev)) {
+ goto out;
+#ifdef CONFIG_MACH_MX27
+ } else if (cpu_is_mx27()) {
+ int ret;
+
+ if (pcdev->active == NULL) {
+ ret = imx_dma_setup_single(pcdev->dma,
+ videobuf_to_dma_contig(vb), vb->size,
+ (u32)pcdev->base_dma + 0x10,
+ DMA_MODE_READ);
+ if (ret) {
+ vb->state = VIDEOBUF_ERROR;
+ wake_up(&vb->done);
+ goto out;
+ }
+
+ vb->state = VIDEOBUF_ACTIVE;
+ pcdev->active = buf;
+ }
+#endif
+ } else { /* cpu_is_mx25() */
+ u32 csicr3, dma_inten = 0;
+
+ if (pcdev->fb1_active == NULL) {
+ writel(videobuf_to_dma_contig(vb),
+ pcdev->base_csi + CSIDMASA_FB1);
+ pcdev->fb1_active = buf;
+ dma_inten = CSICR1_FB1_DMA_INTEN;
+ } else if (pcdev->fb2_active == NULL) {
+ writel(videobuf_to_dma_contig(vb),
+ pcdev->base_csi + CSIDMASA_FB2);
+ pcdev->fb2_active = buf;
+ dma_inten = CSICR1_FB2_DMA_INTEN;
+ }
+
+ if (dma_inten) {
+ list_del(&vb->queue);
+ vb->state = VIDEOBUF_ACTIVE;
+
+ csicr3 = readl(pcdev->base_csi + CSICR3);
+
+ /* Reflash DMA */
+ writel(csicr3 | CSICR3_DMA_REFLASH_RFF,
+ pcdev->base_csi + CSICR3);
+
+ /* clear & enable interrupts */
+ writel(dma_inten, pcdev->base_csi + CSISR);
+ pcdev->csicr1 |= dma_inten;
+ writel(pcdev->csicr1, pcdev->base_csi + CSICR1);
+
+ /* enable DMA */
+ csicr3 |= CSICR3_DMA_REQ_EN_RFF | CSICR3_RXFF_LEVEL(1);
+ writel(csicr3, pcdev->base_csi + CSICR3);
+ }
+ }
+
+out:
+ spin_unlock_irqrestore(&pcdev->lock, flags);
+}
+
+static void mx2_videobuf_release(struct videobuf_queue *vq,
+ struct videobuf_buffer *vb)
+{
+ struct soc_camera_device *icd = vq->priv_data;
+ struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+ struct mx2_camera_dev *pcdev = ici->priv;
+ struct mx2_buffer *buf = container_of(vb, struct mx2_buffer, vb);
+ unsigned long flags;
+
+#ifdef DEBUG
+ dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
+ vb, vb->baddr, vb->bsize);
+
+ switch (vb->state) {
+ case VIDEOBUF_ACTIVE:
+ dev_info(&icd->dev, "%s (active)\n", __func__);
+ break;
+ case VIDEOBUF_QUEUED:
+ dev_info(&icd->dev, "%s (queued)\n", __func__);
+ break;
+ case VIDEOBUF_PREPARED:
+ dev_info(&icd->dev, "%s (prepared)\n", __func__);
+ break;
+ default:
+ dev_info(&icd->dev, "%s (unknown) %d\n", __func__,
+ vb->state);
+ break;
+ }
+#endif
+
+ /*
+ * Terminate only queued but inactive buffers. Active buffers are
+ * released when they become inactive after videobuf_waiton().
+ *
+ * FIXME: implement forced termination of active buffers, so that the
+ * user won't get stuck in an uninterruptible state. This requires a
+ * specific handling for each of the three DMA types that this driver
+ * supports.
+ */
+ spin_lock_irqsave(&pcdev->lock, flags);
+ if (vb->state == VIDEOBUF_QUEUED) {
+ list_del(&vb->queue);
+ vb->state = VIDEOBUF_ERROR;
+ }
+ spin_unlock_irqrestore(&pcdev->lock, flags);
+
+ free_buffer(vq, buf);
+}
+
+static struct videobuf_queue_ops mx2_videobuf_ops = {
+ .buf_setup = mx2_videobuf_setup,
+ .buf_prepare = mx2_videobuf_prepare,
+ .buf_queue = mx2_videobuf_queue,
+ .buf_release = mx2_videobuf_release,
+};
+
+static void mx2_camera_init_videobuf(struct videobuf_queue *q,
+ struct soc_camera_device *icd)
+{
+ struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+ struct mx2_camera_dev *pcdev = ici->priv;
+
+ videobuf_queue_dma_contig_init(q, &mx2_videobuf_ops, pcdev->dev,
+ &pcdev->lock, V4L2_BUF_TYPE_VIDEO_CAPTURE,
+ V4L2_FIELD_NONE, sizeof(struct mx2_buffer), icd);
+}
+
+#define MX2_BUS_FLAGS (SOCAM_DATAWIDTH_8 | \
+ SOCAM_MASTER | \
+ SOCAM_VSYNC_ACTIVE_HIGH | \
+ SOCAM_VSYNC_ACTIVE_LOW | \
+ SOCAM_HSYNC_ACTIVE_HIGH | \
+ SOCAM_HSYNC_ACTIVE_LOW | \
+ SOCAM_PCLK_SAMPLE_RISING | \
+ SOCAM_PCLK_SAMPLE_FALLING | \
+ SOCAM_DATA_ACTIVE_HIGH | \
+ SOCAM_DATA_ACTIVE_LOW)
+
+static int mx27_camera_emma_prp_reset(struct mx2_camera_dev *pcdev)
+{
+ u32 cntl;
+ int count = 0;
+
+ cntl = readl(pcdev->base_emma + PRP_CNTL);
+ writel(PRP_CNTL_SWRST, pcdev->base_emma + PRP_CNTL);
+ while (count++ < 100) {
+ if (!(readl(pcdev->base_emma + PRP_CNTL) & PRP_CNTL_SWRST))
+ return 0;
+ barrier();
+ udelay(1);
+ }
+
+ return -ETIMEDOUT;
+}
+
+static void mx27_camera_emma_buf_init(struct soc_camera_device *icd,
+ int bytesperline)
+{
+ struct soc_camera_host *ici =
+ to_soc_camera_host(icd->dev.parent);
+ struct mx2_camera_dev *pcdev = ici->priv;
+
+ writel(pcdev->discard_buffer_dma,
+ pcdev->base_emma + PRP_DEST_RGB1_PTR);
+ writel(pcdev->discard_buffer_dma,
+ pcdev->base_emma + PRP_DEST_RGB2_PTR);
+
+ /*
+ * We only use the EMMA engine to get rid of the broken
+ * DMA Engine. No color space consversion at the moment.
+ * We adjust incoming and outgoing pixelformat to rgb16
+ * and adjust the bytesperline accordingly.
+ */
+ writel(PRP_CNTL_CH1EN |
+ PRP_CNTL_CSIEN |
+ PRP_CNTL_DATA_IN_RGB16 |
+ PRP_CNTL_CH1_OUT_RGB16 |
+ PRP_CNTL_CH1_LEN |
+ PRP_CNTL_CH1BYP |
+ PRP_CNTL_CH1_TSKIP(0) |
+ PRP_CNTL_IN_TSKIP(0),
+ pcdev->base_emma + PRP_CNTL);
+
+ writel(((bytesperline >> 1) << 16) | icd->user_height,
+ pcdev->base_emma + PRP_SRC_FRAME_SIZE);
+ writel(((bytesperline >> 1) << 16) | icd->user_height,
+ pcdev->base_emma + PRP_CH1_OUT_IMAGE_SIZE);
+ writel(bytesperline,
+ pcdev->base_emma + PRP_DEST_CH1_LINE_STRIDE);
+ writel(0x2ca00565, /* RGB565 */
+ pcdev->base_emma + PRP_SRC_PIXEL_FORMAT_CNTL);
+ writel(0x2ca00565, /* RGB565 */
+ pcdev->base_emma + PRP_CH1_PIXEL_FORMAT_CNTL);
+
+ /* Enable interrupts */
+ writel(PRP_INTR_RDERR |
+ PRP_INTR_CH1WERR |
+ PRP_INTR_CH2WERR |
+ PRP_INTR_CH1FC |
+ PRP_INTR_CH2FC |
+ PRP_INTR_LBOVF |
+ PRP_INTR_CH2OVF,
+ pcdev->base_emma + PRP_INTR_CNTL);
+}
+
+static int mx2_camera_set_bus_param(struct soc_camera_device *icd,
+ __u32 pixfmt)
+{
+ struct soc_camera_host *ici =
+ to_soc_camera_host(icd->dev.parent);
+ struct mx2_camera_dev *pcdev = ici->priv;
+ unsigned long camera_flags, common_flags;
+ int ret = 0;
+ int bytesperline;
+ u32 csicr1 = pcdev->csicr1;
+
+ camera_flags = icd->ops->query_bus_param(icd);
+
+ common_flags = soc_camera_bus_param_compatible(camera_flags,
+ MX2_BUS_FLAGS);
+ if (!common_flags)
+ return -EINVAL;
+
+ if ((common_flags & SOCAM_HSYNC_ACTIVE_HIGH) &&
+ (common_flags & SOCAM_HSYNC_ACTIVE_LOW)) {
+ if (pcdev->platform_flags & MX2_CAMERA_HSYNC_HIGH)
+ common_flags &= ~SOCAM_HSYNC_ACTIVE_LOW;
+ else
+ common_flags &= ~SOCAM_HSYNC_ACTIVE_HIGH;
+ }
+
+ if ((common_flags & SOCAM_PCLK_SAMPLE_RISING) &&
+ (common_flags & SOCAM_PCLK_SAMPLE_FALLING)) {
+ if (pcdev->platform_flags & MX2_CAMERA_PCLK_SAMPLE_RISING)
+ common_flags &= ~SOCAM_PCLK_SAMPLE_FALLING;
+ else
+ common_flags &= ~SOCAM_PCLK_SAMPLE_RISING;
+ }
+
+ ret = icd->ops->set_bus_param(icd, common_flags);
+ if (ret < 0)
+ return ret;
+
+ if (common_flags & SOCAM_PCLK_SAMPLE_FALLING)
+ csicr1 |= CSICR1_INV_PCLK;
+ if (common_flags & SOCAM_VSYNC_ACTIVE_HIGH)
+ csicr1 |= CSICR1_SOF_POL;
+ if (common_flags & SOCAM_HSYNC_ACTIVE_HIGH)
+ csicr1 |= CSICR1_HSYNC_POL;
+ if (pcdev->platform_flags & MX2_CAMERA_SWAP16)
+ csicr1 |= CSICR1_SWAP16_EN;
+ if (pcdev->platform_flags & MX2_CAMERA_EXT_VSYNC)
+ csicr1 |= CSICR1_EXT_VSYNC;
+ if (pcdev->platform_flags & MX2_CAMERA_CCIR)
+ csicr1 |= CSICR1_CCIR_EN;
+ if (pcdev->platform_flags & MX2_CAMERA_CCIR_INTERLACE)
+ csicr1 |= CSICR1_CCIR_MODE;
+ if (pcdev->platform_flags & MX2_CAMERA_GATED_CLOCK)
+ csicr1 |= CSICR1_GCLK_MODE;
+ if (pcdev->platform_flags & MX2_CAMERA_INV_DATA)
+ csicr1 |= CSICR1_INV_DATA;
+ if (pcdev->platform_flags & MX2_CAMERA_PACK_DIR_MSB)
+ csicr1 |= CSICR1_PACK_DIR;
+
+ pcdev->csicr1 = csicr1;
+
+ bytesperline = soc_mbus_bytes_per_line(icd->user_width,
+ icd->current_fmt->host_fmt);
+ if (bytesperline < 0)
+ return bytesperline;
+
+ if (mx27_camera_emma(pcdev)) {
+ ret = mx27_camera_emma_prp_reset(pcdev);
+ if (ret)
+ return ret;
+
+ if (pcdev->discard_buffer)
+ dma_free_coherent(ici->v4l2_dev.dev,
+ pcdev->discard_size, pcdev->discard_buffer,
+ pcdev->discard_buffer_dma);
+
+ /*
+ * I didn't manage to properly enable/disable the prp
+ * on a per frame basis during running transfers,
+ * thus we allocate a buffer here and use it to
+ * discard frames when no buffer is available.
+ * Feel free to work on this ;)
+ */
+ pcdev->discard_size = icd->user_height * bytesperline;
+ pcdev->discard_buffer = dma_alloc_coherent(ici->v4l2_dev.dev,
+ pcdev->discard_size, &pcdev->discard_buffer_dma,
+ GFP_KERNEL);
+ if (!pcdev->discard_buffer)
+ return -ENOMEM;
+
+ mx27_camera_emma_buf_init(icd, bytesperline);
+ } else if (cpu_is_mx25()) {
+ writel((bytesperline * icd->user_height) >> 2,
+ pcdev->base_csi + CSIRXCNT);
+ writel((bytesperline << 16) | icd->user_height,
+ pcdev->base_csi + CSIIMAG_PARA);
+ }
+
+ writel(pcdev->csicr1, pcdev->base_csi + CSICR1);
+
+ return 0;
+}
+
+static int mx2_camera_set_crop(struct soc_camera_device *icd,
+ struct v4l2_crop *a)
+{
+ struct v4l2_rect *rect = &a->c;
+ struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
+ struct v4l2_mbus_framefmt mf;
+ int ret;
+
+ soc_camera_limit_side(&rect->left, &rect->width, 0, 2, 4096);
+ soc_camera_limit_side(&rect->top, &rect->height, 0, 2, 4096);
+
+ ret = v4l2_subdev_call(sd, video, s_crop, a);
+ if (ret < 0)
+ return ret;
+
+ /* The capture device might have changed its output */
+ ret = v4l2_subdev_call(sd, video, g_mbus_fmt, &mf);
+ if (ret < 0)
+ return ret;
+
+ dev_dbg(icd->dev.parent, "Sensor cropped %dx%d\n",
+ mf.width, mf.height);
+
+ icd->user_width = mf.width;
+ icd->user_height = mf.height;
+
+ return ret;
+}
+
+static int mx2_camera_set_fmt(struct soc_camera_device *icd,
+ struct v4l2_format *f)
+{
+ struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+ struct mx2_camera_dev *pcdev = ici->priv;
+ struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
+ const struct soc_camera_format_xlate *xlate;
+ struct v4l2_pix_format *pix = &f->fmt.pix;
+ struct v4l2_mbus_framefmt mf;
+ int ret;
+
+ xlate = soc_camera_xlate_by_fourcc(icd, pix->pixelformat);
+ if (!xlate) {
+ dev_warn(icd->dev.parent, "Format %x not found\n",
+ pix->pixelformat);
+ return -EINVAL;
+ }
+
+ /* eMMA can only do RGB565 */
+ if (mx27_camera_emma(pcdev) && pix->pixelformat != V4L2_PIX_FMT_RGB565)
+ return -EINVAL;
+
+ mf.width = pix->width;
+ mf.height = pix->height;
+ mf.field = pix->field;
+ mf.colorspace = pix->colorspace;
+ mf.code = xlate->code;
+
+ ret = v4l2_subdev_call(sd, video, s_mbus_fmt, &mf);
+ if (ret < 0 && ret != -ENOIOCTLCMD)
+ return ret;
+
+ if (mf.code != xlate->code)
+ return -EINVAL;
+
+ pix->width = mf.width;
+ pix->height = mf.height;
+ pix->field = mf.field;
+ pix->colorspace = mf.colorspace;
+ icd->current_fmt = xlate;
+
+ return 0;
+}
+
+static int mx2_camera_try_fmt(struct soc_camera_device *icd,
+ struct v4l2_format *f)
+{
+ struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+ struct mx2_camera_dev *pcdev = ici->priv;
+ struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
+ const struct soc_camera_format_xlate *xlate;
+ struct v4l2_pix_format *pix = &f->fmt.pix;
+ struct v4l2_mbus_framefmt mf;
+ __u32 pixfmt = pix->pixelformat;
+ unsigned int width_limit;
+ int ret;
+
+ xlate = soc_camera_xlate_by_fourcc(icd, pixfmt);
+ if (pixfmt && !xlate) {
+ dev_warn(icd->dev.parent, "Format %x not found\n", pixfmt);
+ return -EINVAL;
+ }
+
+ /* FIXME: implement MX27 limits */
+
+ /* eMMA can only do RGB565 */
+ if (mx27_camera_emma(pcdev) && pixfmt != V4L2_PIX_FMT_RGB565)
+ return -EINVAL;
+
+ /* limit to MX25 hardware capabilities */
+ if (cpu_is_mx25()) {
+ if (xlate->host_fmt->bits_per_sample <= 8)
+ width_limit = 0xffff * 4;
+ else
+ width_limit = 0xffff * 2;
+ /* CSIIMAG_PARA limit */
+ if (pix->width > width_limit)
+ pix->width = width_limit;
+ if (pix->height > 0xffff)
+ pix->height = 0xffff;
+
+ pix->bytesperline = soc_mbus_bytes_per_line(pix->width,
+ xlate->host_fmt);
+ if (pix->bytesperline < 0)
+ return pix->bytesperline;
+ pix->sizeimage = pix->height * pix->bytesperline;
+ if (pix->sizeimage > (4 * 0x3ffff)) { /* CSIRXCNT limit */
+ dev_warn(icd->dev.parent,
+ "Image size (%u) above limit\n",
+ pix->sizeimage);
+ return -EINVAL;
+ }
+ }
+
+ /* limit to sensor capabilities */
+ mf.width = pix->width;
+ mf.height = pix->height;
+ mf.field = pix->field;
+ mf.colorspace = pix->colorspace;
+ mf.code = xlate->code;
+
+ ret = v4l2_subdev_call(sd, video, try_mbus_fmt, &mf);
+ if (ret < 0)
+ return ret;
+
+ if (mf.field == V4L2_FIELD_ANY)
+ mf.field = V4L2_FIELD_NONE;
+ if (mf.field != V4L2_FIELD_NONE) {
+ dev_err(icd->dev.parent, "Field type %d unsupported.\n",
+ mf.field);
+ return -EINVAL;
+ }
+
+ pix->width = mf.width;
+ pix->height = mf.height;
+ pix->field = mf.field;
+ pix->colorspace = mf.colorspace;
+
+ return 0;
+}
+
+static int mx2_camera_querycap(struct soc_camera_host *ici,
+ struct v4l2_capability *cap)
+{
+ /* cap->name is set by the friendly caller:-> */
+ strlcpy(cap->card, MX2_CAM_DRIVER_DESCRIPTION, sizeof(cap->card));
+ cap->version = MX2_CAM_VERSION_CODE;
+ cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING;
+
+ return 0;
+}
+
+static int mx2_camera_reqbufs(struct soc_camera_file *icf,
+ struct v4l2_requestbuffers *p)
+{
+ int i;
+
+ for (i = 0; i < p->count; i++) {
+ struct mx2_buffer *buf = container_of(icf->vb_vidq.bufs[i],
+ struct mx2_buffer, vb);
+ INIT_LIST_HEAD(&buf->vb.queue);
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_MACH_MX27
+static void mx27_camera_frame_done(struct mx2_camera_dev *pcdev, int state)
+{
+ struct videobuf_buffer *vb;
+ struct mx2_buffer *buf;
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(&pcdev->lock, flags);
+
+ if (!pcdev->active) {
+ dev_err(pcdev->dev, "%s called with no active buffer!\n",
+ __func__);
+ goto out;
+ }
+
+ vb = &pcdev->active->vb;
+ buf = container_of(vb, struct mx2_buffer, vb);
+ WARN_ON(list_empty(&vb->queue));
+ dev_dbg(pcdev->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
+ vb, vb->baddr, vb->bsize);
+
+ /* _init is used to debug races, see comment in pxa_camera_reqbufs() */
+ list_del_init(&vb->queue);
+ vb->state = state;
+ do_gettimeofday(&vb->ts);
+ vb->field_count++;
+
+ wake_up(&vb->done);
+
+ if (list_empty(&pcdev->capture)) {
+ pcdev->active = NULL;
+ goto out;
+ }
+
+ pcdev->active = list_entry(pcdev->capture.next,
+ struct mx2_buffer, vb.queue);
+
+ vb = &pcdev->active->vb;
+ vb->state = VIDEOBUF_ACTIVE;
+
+ ret = imx_dma_setup_single(pcdev->dma, videobuf_to_dma_contig(vb),
+ vb->size, (u32)pcdev->base_dma + 0x10, DMA_MODE_READ);
+
+ if (ret) {
+ vb->state = VIDEOBUF_ERROR;
+ pcdev->active = NULL;
+ wake_up(&vb->done);
+ }
+
+out:
+ spin_unlock_irqrestore(&pcdev->lock, flags);
+}
+
+static void mx27_camera_dma_err_callback(int channel, void *data, int err)
+{
+ struct mx2_camera_dev *pcdev = data;
+
+ mx27_camera_frame_done(pcdev, VIDEOBUF_ERROR);
+}
+
+static void mx27_camera_dma_callback(int channel, void *data)
+{
+ struct mx2_camera_dev *pcdev = data;
+
+ mx27_camera_frame_done(pcdev, VIDEOBUF_DONE);
+}
+
+#define DMA_REQ_CSI_RX 31 /* FIXME: Add this to a resource */
+
+static int __devinit mx27_camera_dma_init(struct platform_device *pdev,
+ struct mx2_camera_dev *pcdev)
+{
+ int err;
+
+ pcdev->dma = imx_dma_request_by_prio("CSI RX DMA", DMA_PRIO_HIGH);
+ if (pcdev->dma < 0) {
+ dev_err(&pdev->dev, "%s failed to request DMA channel\n",
+ __func__);
+ return pcdev->dma;
+ }
+
+ err = imx_dma_setup_handlers(pcdev->dma, mx27_camera_dma_callback,
+ mx27_camera_dma_err_callback, pcdev);
+ if (err) {
+ dev_err(&pdev->dev, "%s failed to set DMA callback\n",
+ __func__);
+ goto err_out;
+ }
+
+ err = imx_dma_config_channel(pcdev->dma,
+ IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_FIFO,
+ IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_LINEAR,
+ DMA_REQ_CSI_RX, 1);
+ if (err) {
+ dev_err(&pdev->dev, "%s failed to config DMA channel\n",
+ __func__);
+ goto err_out;
+ }
+
+ imx_dma_config_burstlen(pcdev->dma, 64);
+
+ return 0;
+
+err_out:
+ imx_dma_free(pcdev->dma);
+
+ return err;
+}
+#endif /* CONFIG_MACH_MX27 */
+
+static unsigned int mx2_camera_poll(struct file *file, poll_table *pt)
+{
+ struct soc_camera_file *icf = file->private_data;
+
+ return videobuf_poll_stream(file, &icf->vb_vidq, pt);
+}
+
+static struct soc_camera_host_ops mx2_soc_camera_host_ops = {
+ .owner = THIS_MODULE,
+ .add = mx2_camera_add_device,
+ .remove = mx2_camera_remove_device,
+ .set_fmt = mx2_camera_set_fmt,
+ .set_crop = mx2_camera_set_crop,
+ .try_fmt = mx2_camera_try_fmt,
+ .init_videobuf = mx2_camera_init_videobuf,
+ .reqbufs = mx2_camera_reqbufs,
+ .poll = mx2_camera_poll,
+ .querycap = mx2_camera_querycap,
+ .set_bus_param = mx2_camera_set_bus_param,
+};
+
+static void mx27_camera_frame_done_emma(struct mx2_camera_dev *pcdev,
+ int bufnum, int state)
+{
+ struct mx2_buffer *buf;
+ struct videobuf_buffer *vb;
+ unsigned long phys;
+
+ if (!list_empty(&pcdev->active_bufs)) {
+ buf = list_entry(pcdev->active_bufs.next,
+ struct mx2_buffer, vb.queue);
+
+ BUG_ON(buf->bufnum != bufnum);
+
+ vb = &buf->vb;
+#ifdef DEBUG
+ phys = videobuf_to_dma_contig(vb);
+ if (readl(pcdev->base_emma + PRP_DEST_RGB1_PTR + 4 * bufnum)
+ != phys) {
+ dev_err(pcdev->dev, "%p != %p\n", phys,
+ readl(pcdev->base_emma +
+ PRP_DEST_RGB1_PTR +
+ 4 * bufnum));
+ }
+#endif
+ dev_dbg(pcdev->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__, vb,
+ vb->baddr, vb->bsize);
+
+ list_del(&vb->queue);
+ vb->state = state;
+ do_gettimeofday(&vb->ts);
+ vb->field_count++;
+
+ wake_up(&vb->done);
+ }
+
+ if (list_empty(&pcdev->capture)) {
+ writel(pcdev->discard_buffer_dma, pcdev->base_emma +
+ PRP_DEST_RGB1_PTR + 4 * bufnum);
+ return;
+ }
+
+ buf = list_entry(pcdev->capture.next,
+ struct mx2_buffer, vb.queue);
+
+ buf->bufnum = bufnum;
+
+ list_move_tail(pcdev->capture.next, &pcdev->active_bufs);
+
+ vb = &buf->vb;
+ vb->state = VIDEOBUF_ACTIVE;
+
+ phys = videobuf_to_dma_contig(vb);
+ writel(phys, pcdev->base_emma + PRP_DEST_RGB1_PTR + 4 * bufnum);
+}
+
+static irqreturn_t mx27_camera_emma_irq(int irq_emma, void *data)
+{
+ struct mx2_camera_dev *pcdev = data;
+ unsigned int status = readl(pcdev->base_emma + PRP_INTRSTATUS);
+ struct mx2_buffer *buf;
+
+ if (status & (1 << 7)) { /* overflow */
+ u32 cntl;
+ /*
+ * We only disable channel 1 here since this is the only
+ * enabled channel
+ *
+ * FIXME: the correct DMA overflow handling should be resetting
+ * the buffer, returning an error frame, and continuing with
+ * the next one.
+ */
+ cntl = readl(pcdev->base_emma + PRP_CNTL);
+ writel(cntl & ~PRP_CNTL_CH1EN, pcdev->base_emma + PRP_CNTL);
+ writel(cntl, pcdev->base_emma + PRP_CNTL);
+ }
+ if ((status & (3 << 5)) == (3 << 5)
+ && !list_empty(&pcdev->active_bufs)) {
+ /*
+ * Both buffers have triggered, process the one we're expecting
+ * to first
+ */
+ buf = list_entry(pcdev->active_bufs.next,
+ struct mx2_buffer, vb.queue);
+ mx27_camera_frame_done_emma(pcdev, buf->bufnum, VIDEOBUF_DONE);
+ status &= ~(1 << (6 - buf->bufnum)); /* mark processed */
+ }
+ if (status & (1 << 6))
+ mx27_camera_frame_done_emma(pcdev, 0, VIDEOBUF_DONE);
+ if (status & (1 << 5))
+ mx27_camera_frame_done_emma(pcdev, 1, VIDEOBUF_DONE);
+
+ writel(status, pcdev->base_emma + PRP_INTRSTATUS);
+
+ return IRQ_HANDLED;
+}
+
+static int __devinit mx27_camera_emma_init(struct mx2_camera_dev *pcdev)
+{
+ struct resource *res_emma = pcdev->res_emma;
+ int err = 0;
+
+ if (!request_mem_region(res_emma->start, resource_size(res_emma),
+ MX2_CAM_DRV_NAME)) {
+ err = -EBUSY;
+ goto out;
+ }
+
+ pcdev->base_emma = ioremap(res_emma->start, resource_size(res_emma));
+ if (!pcdev->base_emma) {
+ err = -ENOMEM;
+ goto exit_release;
+ }
+
+ err = request_irq(pcdev->irq_emma, mx27_camera_emma_irq, 0,
+ MX2_CAM_DRV_NAME, pcdev);
+ if (err) {
+ dev_err(pcdev->dev, "Camera EMMA interrupt register failed \n");
+ goto exit_iounmap;
+ }
+
+ pcdev->clk_emma = clk_get(NULL, "emma");
+ if (IS_ERR(pcdev->clk_emma)) {
+ err = PTR_ERR(pcdev->clk_emma);
+ goto exit_free_irq;
+ }
+
+ clk_enable(pcdev->clk_emma);
+
+ err = mx27_camera_emma_prp_reset(pcdev);
+ if (err)
+ goto exit_clk_emma_put;
+
+ return err;
+
+exit_clk_emma_put:
+ clk_disable(pcdev->clk_emma);
+ clk_put(pcdev->clk_emma);
+exit_free_irq:
+ free_irq(pcdev->irq_emma, pcdev);
+exit_iounmap:
+ iounmap(pcdev->base_emma);
+exit_release:
+ release_mem_region(res_emma->start, resource_size(res_emma));
+out:
+ return err;
+}
+
+static int __devinit mx2_camera_probe(struct platform_device *pdev)
+{
+ struct mx2_camera_dev *pcdev;
+ struct resource *res_csi, *res_emma;
+ void __iomem *base_csi;
+ int irq_csi, irq_emma;
+ irq_handler_t mx2_cam_irq_handler = cpu_is_mx25() ? mx25_camera_irq
+ : mx27_camera_irq;
+ int err = 0;
+
+ dev_dbg(&pdev->dev, "initialising\n");
+
+ res_csi = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ irq_csi = platform_get_irq(pdev, 0);
+ if (res_csi == NULL || irq_csi < 0) {
+ dev_err(&pdev->dev, "Missing platform resources data\n");
+ err = -ENODEV;
+ goto exit;
+ }
+
+ pcdev = kzalloc(sizeof(*pcdev), GFP_KERNEL);
+ if (!pcdev) {
+ dev_err(&pdev->dev, "Could not allocate pcdev\n");
+ err = -ENOMEM;
+ goto exit;
+ }
+
+ pcdev->clk_csi = clk_get(&pdev->dev, NULL);
+ if (IS_ERR(pcdev->clk_csi)) {
+ err = PTR_ERR(pcdev->clk_csi);
+ goto exit_kfree;
+ }
+
+ dev_dbg(&pdev->dev, "Camera clock frequency: %ld\n",
+ clk_get_rate(pcdev->clk_csi));
+
+ /* Initialize DMA */
+#ifdef CONFIG_MACH_MX27
+ if (cpu_is_mx27()) {
+ err = mx27_camera_dma_init(pdev, pcdev);
+ if (err)
+ goto exit_clk_put;
+ }
+#endif /* CONFIG_MACH_MX27 */
+
+ pcdev->res_csi = res_csi;
+ pcdev->pdata = pdev->dev.platform_data;
+ if (pcdev->pdata) {
+ long rate;
+
+ pcdev->platform_flags = pcdev->pdata->flags;
+
+ rate = clk_round_rate(pcdev->clk_csi, pcdev->pdata->clk * 2);
+ if (rate <= 0) {
+ err = -ENODEV;
+ goto exit_dma_free;
+ }
+ err = clk_set_rate(pcdev->clk_csi, rate);
+ if (err < 0)
+ goto exit_dma_free;
+ }
+
+ INIT_LIST_HEAD(&pcdev->capture);
+ INIT_LIST_HEAD(&pcdev->active_bufs);
+ spin_lock_init(&pcdev->lock);
+
+ /*
+ * Request the regions.
+ */
+ if (!request_mem_region(res_csi->start, resource_size(res_csi),
+ MX2_CAM_DRV_NAME)) {
+ err = -EBUSY;
+ goto exit_dma_free;
+ }
+
+ base_csi = ioremap(res_csi->start, resource_size(res_csi));
+ if (!base_csi) {
+ err = -ENOMEM;
+ goto exit_release;
+ }
+ pcdev->irq_csi = irq_csi;
+ pcdev->base_csi = base_csi;
+ pcdev->base_dma = res_csi->start;
+ pcdev->dev = &pdev->dev;
+
+ err = request_irq(pcdev->irq_csi, mx2_cam_irq_handler, 0,
+ MX2_CAM_DRV_NAME, pcdev);
+ if (err) {
+ dev_err(pcdev->dev, "Camera interrupt register failed \n");
+ goto exit_iounmap;
+ }
+
+ if (cpu_is_mx27()) {
+ /* EMMA support */
+ res_emma = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ irq_emma = platform_get_irq(pdev, 1);
+
+ if (res_emma && irq_emma >= 0) {
+ dev_info(&pdev->dev, "Using EMMA\n");
+ pcdev->use_emma = 1;
+ pcdev->res_emma = res_emma;
+ pcdev->irq_emma = irq_emma;
+ if (mx27_camera_emma_init(pcdev))
+ goto exit_free_irq;
+ }
+ }
+
+ pcdev->soc_host.drv_name = MX2_CAM_DRV_NAME,
+ pcdev->soc_host.ops = &mx2_soc_camera_host_ops,
+ pcdev->soc_host.priv = pcdev;
+ pcdev->soc_host.v4l2_dev.dev = &pdev->dev;
+ pcdev->soc_host.nr = pdev->id;
+ err = soc_camera_host_register(&pcdev->soc_host);
+ if (err)
+ goto exit_free_emma;
+
+ return 0;
+
+exit_free_emma:
+ if (mx27_camera_emma(pcdev)) {
+ free_irq(pcdev->irq_emma, pcdev);
+ clk_disable(pcdev->clk_emma);
+ clk_put(pcdev->clk_emma);
+ iounmap(pcdev->base_emma);
+ release_mem_region(res_emma->start, resource_size(res_emma));
+ }
+exit_free_irq:
+ free_irq(pcdev->irq_csi, pcdev);
+exit_iounmap:
+ iounmap(base_csi);
+exit_release:
+ release_mem_region(res_csi->start, resource_size(res_csi));
+exit_dma_free:
+#ifdef CONFIG_MACH_MX27
+ if (cpu_is_mx27())
+ imx_dma_free(pcdev->dma);
+exit_clk_put:
+ clk_put(pcdev->clk_csi);
+#endif /* CONFIG_MACH_MX27 */
+exit_kfree:
+ kfree(pcdev);
+exit:
+ return err;
+}
+
+static int __devexit mx2_camera_remove(struct platform_device *pdev)
+{
+ struct soc_camera_host *soc_host = to_soc_camera_host(&pdev->dev);
+ struct mx2_camera_dev *pcdev = container_of(soc_host,
+ struct mx2_camera_dev, soc_host);
+ struct resource *res;
+
+ clk_put(pcdev->clk_csi);
+#ifdef CONFIG_MACH_MX27
+ if (cpu_is_mx27())
+ imx_dma_free(pcdev->dma);
+#endif /* CONFIG_MACH_MX27 */
+ free_irq(pcdev->irq_csi, pcdev);
+ if (mx27_camera_emma(pcdev))
+ free_irq(pcdev->irq_emma, pcdev);
+
+ soc_camera_host_unregister(&pcdev->soc_host);
+
+ iounmap(pcdev->base_csi);
+
+ if (mx27_camera_emma(pcdev)) {
+ clk_disable(pcdev->clk_emma);
+ clk_put(pcdev->clk_emma);
+ iounmap(pcdev->base_emma);
+ res = pcdev->res_emma;
+ release_mem_region(res->start, resource_size(res));
+ }
+
+ res = pcdev->res_csi;
+ release_mem_region(res->start, resource_size(res));
+
+ kfree(pcdev);
+
+ dev_info(&pdev->dev, "MX2 Camera driver unloaded\n");
+
+ return 0;
+}
+
+static struct platform_driver mx2_camera_driver = {
+ .driver = {
+ .name = MX2_CAM_DRV_NAME,
+ },
+ .remove = __devexit_p(mx2_camera_remove),
+};
+
+
+static int __init mx2_camera_init(void)
+{
+ return platform_driver_probe(&mx2_camera_driver, &mx2_camera_probe);
+}
+
+static void __exit mx2_camera_exit(void)
+{
+ return platform_driver_unregister(&mx2_camera_driver);
+}
+
+module_init(mx2_camera_init);
+module_exit(mx2_camera_exit);
+
+MODULE_DESCRIPTION("i.MX27/i.MX25 SoC Camera Host driver");
+MODULE_AUTHOR("Sascha Hauer <sha@pengutronix.de>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 26386a92f5a..9b089dfb173 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -353,6 +353,16 @@ config VMWARE_BALLOON
To compile this driver as a module, choose M here: the
module will be called vmware_balloon.
+config ARM_CHARLCD
+ bool "ARM Ltd. Character LCD Driver"
+ depends on PLAT_VERSATILE
+ help
+ This is a driver for the character LCD found on the ARM Ltd.
+ Versatile and RealView Platform Baseboards. It doesn't do
+ very much more than display the text "ARM Linux" on the first
+ line and the Linux version on the second line, but that's
+ still useful.
+
source "drivers/misc/c2port/Kconfig"
source "drivers/misc/eeprom/Kconfig"
source "drivers/misc/cb710/Kconfig"
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 6ed06a19474..67552d6e932 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -31,3 +31,4 @@ obj-$(CONFIG_IWMC3200TOP) += iwmc3200top/
obj-y += eeprom/
obj-y += cb710/
obj-$(CONFIG_VMWARE_BALLOON) += vmware_balloon.o
+obj-$(CONFIG_ARM_CHARLCD) += arm-charlcd.o
diff --git a/drivers/misc/arm-charlcd.c b/drivers/misc/arm-charlcd.c
new file mode 100644
index 00000000000..9e3879ef58f
--- /dev/null
+++ b/drivers/misc/arm-charlcd.c
@@ -0,0 +1,396 @@
+/*
+ * Driver for the on-board character LCD found on some ARM reference boards
+ * This is basically an Hitachi HD44780 LCD with a custom IP block to drive it
+ * http://en.wikipedia.org/wiki/HD44780_Character_LCD
+ * Currently it will just display the text "ARM Linux" and the linux version
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ * Author: Linus Walleij <triad@df.lth.se>
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+#include <generated/utsrelease.h>
+
+#define DRIVERNAME "arm-charlcd"
+#define CHARLCD_TIMEOUT (msecs_to_jiffies(1000))
+
+/* Offsets to registers */
+#define CHAR_COM 0x00U
+#define CHAR_DAT 0x04U
+#define CHAR_RD 0x08U
+#define CHAR_RAW 0x0CU
+#define CHAR_MASK 0x10U
+#define CHAR_STAT 0x14U
+
+#define CHAR_RAW_CLEAR 0x00000000U
+#define CHAR_RAW_VALID 0x00000100U
+
+/* Hitachi HD44780 display commands */
+#define HD_CLEAR 0x01U
+#define HD_HOME 0x02U
+#define HD_ENTRYMODE 0x04U
+#define HD_ENTRYMODE_INCREMENT 0x02U
+#define HD_ENTRYMODE_SHIFT 0x01U
+#define HD_DISPCTRL 0x08U
+#define HD_DISPCTRL_ON 0x04U
+#define HD_DISPCTRL_CURSOR_ON 0x02U
+#define HD_DISPCTRL_CURSOR_BLINK 0x01U
+#define HD_CRSR_SHIFT 0x10U
+#define HD_CRSR_SHIFT_DISPLAY 0x08U
+#define HD_CRSR_SHIFT_DISPLAY_RIGHT 0x04U
+#define HD_FUNCSET 0x20U
+#define HD_FUNCSET_8BIT 0x10U
+#define HD_FUNCSET_2_LINES 0x08U
+#define HD_FUNCSET_FONT_5X10 0x04U
+#define HD_SET_CGRAM 0x40U
+#define HD_SET_DDRAM 0x80U
+#define HD_BUSY_FLAG 0x80U
+
+/**
+ * @dev: a pointer back to containing device
+ * @phybase: the offset to the controller in physical memory
+ * @physize: the size of the physical page
+ * @virtbase: the offset to the controller in virtual memory
+ * @irq: reserved interrupt number
+ * @complete: completion structure for the last LCD command
+ */
+struct charlcd {
+ struct device *dev;
+ u32 phybase;
+ u32 physize;
+ void __iomem *virtbase;
+ int irq;
+ struct completion complete;
+ struct delayed_work init_work;
+};
+
+static irqreturn_t charlcd_interrupt(int irq, void *data)
+{
+ struct charlcd *lcd = data;
+ u8 status;
+
+ status = readl(lcd->virtbase + CHAR_STAT) & 0x01;
+ /* Clear IRQ */
+ writel(CHAR_RAW_CLEAR, lcd->virtbase + CHAR_RAW);
+ if (status)
+ complete(&lcd->complete);
+ else
+ dev_info(lcd->dev, "Spurious IRQ (%02x)\n", status);
+ return IRQ_HANDLED;
+}
+
+
+static void charlcd_wait_complete_irq(struct charlcd *lcd)
+{
+ int ret;
+
+ ret = wait_for_completion_interruptible_timeout(&lcd->complete,
+ CHARLCD_TIMEOUT);
+ /* Disable IRQ after completion */
+ writel(0x00, lcd->virtbase + CHAR_MASK);
+
+ if (ret < 0) {
+ dev_err(lcd->dev,
+ "wait_for_completion_interruptible_timeout() "
+ "returned %d waiting for ready\n", ret);
+ return;
+ }
+
+ if (ret == 0) {
+ dev_err(lcd->dev, "charlcd controller timed out "
+ "waiting for ready\n");
+ return;
+ }
+}
+
+static u8 charlcd_4bit_read_char(struct charlcd *lcd)
+{
+ u8 data;
+ u32 val;
+ int i;
+
+ /* If we can, use an IRQ to wait for the data, else poll */
+ if (lcd->irq >= 0)
+ charlcd_wait_complete_irq(lcd);
+ else {
+ i = 0;
+ val = 0;
+ while (!(val & CHAR_RAW_VALID) && i < 10) {
+ udelay(100);
+ val = readl(lcd->virtbase + CHAR_RAW);
+ i++;
+ }
+
+ writel(CHAR_RAW_CLEAR, lcd->virtbase + CHAR_RAW);
+ }
+ msleep(1);
+
+ /* Read the 4 high bits of the data */
+ data = readl(lcd->virtbase + CHAR_RD) & 0xf0;
+
+ /*
+ * The second read for the low bits does not trigger an IRQ
+ * so in this case we have to poll for the 4 lower bits
+ */
+ i = 0;
+ val = 0;
+ while (!(val & CHAR_RAW_VALID) && i < 10) {
+ udelay(100);
+ val = readl(lcd->virtbase + CHAR_RAW);
+ i++;
+ }
+ writel(CHAR_RAW_CLEAR, lcd->virtbase + CHAR_RAW);
+ msleep(1);
+
+ /* Read the 4 low bits of the data */
+ data |= (readl(lcd->virtbase + CHAR_RD) >> 4) & 0x0f;
+
+ return data;
+}
+
+static bool charlcd_4bit_read_bf(struct charlcd *lcd)
+{
+ if (lcd->irq >= 0) {
+ /*
+ * If we'll use IRQs to wait for the busyflag, clear any
+ * pending flag and enable IRQ
+ */
+ writel(CHAR_RAW_CLEAR, lcd->virtbase + CHAR_RAW);
+ init_completion(&lcd->complete);
+ writel(0x01, lcd->virtbase + CHAR_MASK);
+ }
+ readl(lcd->virtbase + CHAR_COM);
+ return charlcd_4bit_read_char(lcd) & HD_BUSY_FLAG ? true : false;
+}
+
+static void charlcd_4bit_wait_busy(struct charlcd *lcd)
+{
+ int retries = 50;
+
+ udelay(100);
+ while (charlcd_4bit_read_bf(lcd) && retries)
+ retries--;
+ if (!retries)
+ dev_err(lcd->dev, "timeout waiting for busyflag\n");
+}
+
+static void charlcd_4bit_command(struct charlcd *lcd, u8 cmd)
+{
+ u32 cmdlo = (cmd << 4) & 0xf0;
+ u32 cmdhi = (cmd & 0xf0);
+
+ writel(cmdhi, lcd->virtbase + CHAR_COM);
+ udelay(10);
+ writel(cmdlo, lcd->virtbase + CHAR_COM);
+ charlcd_4bit_wait_busy(lcd);
+}
+
+static void charlcd_4bit_char(struct charlcd *lcd, u8 ch)
+{
+ u32 chlo = (ch << 4) & 0xf0;
+ u32 chhi = (ch & 0xf0);
+
+ writel(chhi, lcd->virtbase + CHAR_DAT);
+ udelay(10);
+ writel(chlo, lcd->virtbase + CHAR_DAT);
+ charlcd_4bit_wait_busy(lcd);
+}
+
+static void charlcd_4bit_print(struct charlcd *lcd, int line, const char *str)
+{
+ u8 offset;
+ int i;
+
+ /*
+ * We support line 0, 1
+ * Line 1 runs from 0x00..0x27
+ * Line 2 runs from 0x28..0x4f
+ */
+ if (line == 0)
+ offset = 0;
+ else if (line == 1)
+ offset = 0x28;
+ else
+ return;
+
+ /* Set offset */
+ charlcd_4bit_command(lcd, HD_SET_DDRAM | offset);
+
+ /* Send string */
+ for (i = 0; i < strlen(str) && i < 0x28; i++)
+ charlcd_4bit_char(lcd, str[i]);
+}
+
+static void charlcd_4bit_init(struct charlcd *lcd)
+{
+ /* These commands cannot be checked with the busy flag */
+ writel(HD_FUNCSET | HD_FUNCSET_8BIT, lcd->virtbase + CHAR_COM);
+ msleep(5);
+ writel(HD_FUNCSET | HD_FUNCSET_8BIT, lcd->virtbase + CHAR_COM);
+ udelay(100);
+ writel(HD_FUNCSET | HD_FUNCSET_8BIT, lcd->virtbase + CHAR_COM);
+ udelay(100);
+ /* Go to 4bit mode */
+ writel(HD_FUNCSET, lcd->virtbase + CHAR_COM);
+ udelay(100);
+ /*
+ * 4bit mode, 2 lines, 5x8 font, after this the number of lines
+ * and the font cannot be changed until the next initialization sequence
+ */
+ charlcd_4bit_command(lcd, HD_FUNCSET | HD_FUNCSET_2_LINES);
+ charlcd_4bit_command(lcd, HD_DISPCTRL | HD_DISPCTRL_ON);
+ charlcd_4bit_command(lcd, HD_ENTRYMODE | HD_ENTRYMODE_INCREMENT);
+ charlcd_4bit_command(lcd, HD_CLEAR);
+ charlcd_4bit_command(lcd, HD_HOME);
+ /* Put something useful in the display */
+ charlcd_4bit_print(lcd, 0, "ARM Linux");
+ charlcd_4bit_print(lcd, 1, UTS_RELEASE);
+}
+
+static void charlcd_init_work(struct work_struct *work)
+{
+ struct charlcd *lcd =
+ container_of(work, struct charlcd, init_work.work);
+
+ charlcd_4bit_init(lcd);
+}
+
+static int __init charlcd_probe(struct platform_device *pdev)
+{
+ int ret;
+ struct charlcd *lcd;
+ struct resource *res;
+
+ lcd = kzalloc(sizeof(struct charlcd), GFP_KERNEL);
+ if (!lcd)
+ return -ENOMEM;
+
+ lcd->dev = &pdev->dev;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ ret = -ENOENT;
+ goto out_no_resource;
+ }
+ lcd->phybase = res->start;
+ lcd->physize = resource_size(res);
+
+ if (request_mem_region(lcd->phybase, lcd->physize,
+ DRIVERNAME) == NULL) {
+ ret = -EBUSY;
+ goto out_no_memregion;
+ }
+
+ lcd->virtbase = ioremap(lcd->phybase, lcd->physize);
+ if (!lcd->virtbase) {
+ ret = -ENOMEM;
+ goto out_no_remap;
+ }
+
+ lcd->irq = platform_get_irq(pdev, 0);
+ /* If no IRQ is supplied, we'll survive without it */
+ if (lcd->irq >= 0) {
+ if (request_irq(lcd->irq, charlcd_interrupt, IRQF_DISABLED,
+ DRIVERNAME, lcd)) {
+ ret = -EIO;
+ goto out_no_irq;
+ }
+ }
+
+ platform_set_drvdata(pdev, lcd);
+
+ /*
+ * Initialize the display in a delayed work, because
+ * it is VERY slow and would slow down the boot of the system.
+ */
+ INIT_DELAYED_WORK(&lcd->init_work, charlcd_init_work);
+ schedule_delayed_work(&lcd->init_work, 0);
+
+ dev_info(&pdev->dev, "initalized ARM character LCD at %08x\n",
+ lcd->phybase);
+
+ return 0;
+
+out_no_irq:
+ iounmap(lcd->virtbase);
+out_no_remap:
+ platform_set_drvdata(pdev, NULL);
+out_no_memregion:
+ release_mem_region(lcd->phybase, SZ_4K);
+out_no_resource:
+ kfree(lcd);
+ return ret;
+}
+
+static int __exit charlcd_remove(struct platform_device *pdev)
+{
+ struct charlcd *lcd = platform_get_drvdata(pdev);
+
+ if (lcd) {
+ free_irq(lcd->irq, lcd);
+ iounmap(lcd->virtbase);
+ release_mem_region(lcd->phybase, lcd->physize);
+ platform_set_drvdata(pdev, NULL);
+ kfree(lcd);
+ }
+
+ return 0;
+}
+
+static int charlcd_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct charlcd *lcd = platform_get_drvdata(pdev);
+
+ /* Power the display off */
+ charlcd_4bit_command(lcd, HD_DISPCTRL);
+ return 0;
+}
+
+static int charlcd_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct charlcd *lcd = platform_get_drvdata(pdev);
+
+ /* Turn the display back on */
+ charlcd_4bit_command(lcd, HD_DISPCTRL | HD_DISPCTRL_ON);
+ return 0;
+}
+
+static const struct dev_pm_ops charlcd_pm_ops = {
+ .suspend = charlcd_suspend,
+ .resume = charlcd_resume,
+};
+
+static struct platform_driver charlcd_driver = {
+ .driver = {
+ .name = DRIVERNAME,
+ .owner = THIS_MODULE,
+ .pm = &charlcd_pm_ops,
+ },
+ .remove = __exit_p(charlcd_remove),
+};
+
+static int __init charlcd_init(void)
+{
+ return platform_driver_probe(&charlcd_driver, charlcd_probe);
+}
+
+static void __exit charlcd_exit(void)
+{
+ platform_driver_unregister(&charlcd_driver);
+}
+
+module_init(charlcd_init);
+module_exit(charlcd_exit);
+
+MODULE_AUTHOR("Linus Walleij <triad@df.lth.se>");
+MODULE_DESCRIPTION("ARM Character LCD Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 2ed435bd4b6..840b301b567 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -26,7 +26,6 @@
#include <linux/amba/mmci.h>
#include <linux/regulator/consumer.h>
-#include <asm/cacheflush.h>
#include <asm/div64.h>
#include <asm/io.h>
#include <asm/sizes.h>
@@ -37,12 +36,39 @@
static unsigned int fmax = 515633;
+/**
+ * struct variant_data - MMCI variant-specific quirks
+ * @clkreg: default value for MCICLOCK register
+ * @clkreg_enable: enable value for MMCICLOCK register
+ * @datalength_bits: number of bits in the MMCIDATALENGTH register
+ */
+struct variant_data {
+ unsigned int clkreg;
+ unsigned int clkreg_enable;
+ unsigned int datalength_bits;
+};
+
+static struct variant_data variant_arm = {
+ .datalength_bits = 16,
+};
+
+static struct variant_data variant_u300 = {
+ .clkreg_enable = 1 << 13, /* HWFCEN */
+ .datalength_bits = 16,
+};
+
+static struct variant_data variant_ux500 = {
+ .clkreg = MCI_CLK_ENABLE,
+ .clkreg_enable = 1 << 14, /* HWFCEN */
+ .datalength_bits = 24,
+};
/*
* This must be called with host->lock held
*/
static void mmci_set_clkreg(struct mmci_host *host, unsigned int desired)
{
- u32 clk = 0;
+ struct variant_data *variant = host->variant;
+ u32 clk = variant->clkreg;
if (desired) {
if (desired >= host->mclk) {
@@ -54,8 +80,8 @@ static void mmci_set_clkreg(struct mmci_host *host, unsigned int desired)
clk = 255;
host->cclk = host->mclk / (2 * (clk + 1));
}
- if (host->hw_designer == AMBA_VENDOR_ST)
- clk |= MCI_ST_FCEN; /* Bug fix in ST IP block */
+
+ clk |= variant->clkreg_enable;
clk |= MCI_CLK_ENABLE;
/* This hasn't proven to be worthwhile */
/* clk |= MCI_CLK_PWRSAVE; */
@@ -98,6 +124,18 @@ static void mmci_stop_data(struct mmci_host *host)
host->data = NULL;
}
+static void mmci_init_sg(struct mmci_host *host, struct mmc_data *data)
+{
+ unsigned int flags = SG_MITER_ATOMIC;
+
+ if (data->flags & MMC_DATA_READ)
+ flags |= SG_MITER_TO_SG;
+ else
+ flags |= SG_MITER_FROM_SG;
+
+ sg_miter_start(&host->sg_miter, data->sg, data->sg_len, flags);
+}
+
static void mmci_start_data(struct mmci_host *host, struct mmc_data *data)
{
unsigned int datactrl, timeout, irqmask;
@@ -109,7 +147,7 @@ static void mmci_start_data(struct mmci_host *host, struct mmc_data *data)
data->blksz, data->blocks, data->flags);
host->data = data;
- host->size = data->blksz;
+ host->size = data->blksz * data->blocks;
host->data_xfered = 0;
mmci_init_sg(host, data);
@@ -210,8 +248,17 @@ mmci_data_irq(struct mmci_host *host, struct mmc_data *data,
* We hit an error condition. Ensure that any data
* partially written to a page is properly coherent.
*/
- if (host->sg_len && data->flags & MMC_DATA_READ)
- flush_dcache_page(sg_page(host->sg_ptr));
+ if (data->flags & MMC_DATA_READ) {
+ struct sg_mapping_iter *sg_miter = &host->sg_miter;
+ unsigned long flags;
+
+ local_irq_save(flags);
+ if (sg_miter_next(sg_miter)) {
+ flush_dcache_page(sg_miter->page);
+ sg_miter_stop(sg_miter);
+ }
+ local_irq_restore(flags);
+ }
}
if (status & MCI_DATAEND) {
mmci_stop_data(host);
@@ -314,15 +361,18 @@ static int mmci_pio_write(struct mmci_host *host, char *buffer, unsigned int rem
static irqreturn_t mmci_pio_irq(int irq, void *dev_id)
{
struct mmci_host *host = dev_id;
+ struct sg_mapping_iter *sg_miter = &host->sg_miter;
void __iomem *base = host->base;
+ unsigned long flags;
u32 status;
status = readl(base + MMCISTATUS);
dev_dbg(mmc_dev(host->mmc), "irq1 (pio) %08x\n", status);
+ local_irq_save(flags);
+
do {
- unsigned long flags;
unsigned int remain, len;
char *buffer;
@@ -336,11 +386,11 @@ static irqreturn_t mmci_pio_irq(int irq, void *dev_id)
if (!(status & (MCI_TXFIFOHALFEMPTY|MCI_RXDATAAVLBL)))
break;
- /*
- * Map the current scatter buffer.
- */
- buffer = mmci_kmap_atomic(host, &flags) + host->sg_off;
- remain = host->sg_ptr->length - host->sg_off;
+ if (!sg_miter_next(sg_miter))
+ break;
+
+ buffer = sg_miter->addr;
+ remain = sg_miter->length;
len = 0;
if (status & MCI_RXACTIVE)
@@ -348,31 +398,24 @@ static irqreturn_t mmci_pio_irq(int irq, void *dev_id)
if (status & MCI_TXACTIVE)
len = mmci_pio_write(host, buffer, remain, status);
- /*
- * Unmap the buffer.
- */
- mmci_kunmap_atomic(host, buffer, &flags);
+ sg_miter->consumed = len;
- host->sg_off += len;
host->size -= len;
remain -= len;
if (remain)
break;
- /*
- * If we were reading, and we have completed this
- * page, ensure that the data cache is coherent.
- */
if (status & MCI_RXACTIVE)
- flush_dcache_page(sg_page(host->sg_ptr));
-
- if (!mmci_next_sg(host))
- break;
+ flush_dcache_page(sg_miter->page);
status = readl(base + MMCISTATUS);
} while (1);
+ sg_miter_stop(sg_miter);
+
+ local_irq_restore(flags);
+
/*
* If we're nearing the end of the read, switch to
* "any data available" mode.
@@ -477,16 +520,9 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
/* This implicitly enables the regulator */
mmc_regulator_set_ocr(host->vcc, ios->vdd);
#endif
- /*
- * The translate_vdd function is not used if you have
- * an external regulator, or your design is really weird.
- * Using it would mean sending in power control BOTH using
- * a regulator AND the 4 MMCIPWR bits. If we don't have
- * a regulator, we might have some other platform specific
- * power control behind this translate function.
- */
- if (!host->vcc && host->plat->translate_vdd)
- pwr |= host->plat->translate_vdd(mmc_dev(mmc), ios->vdd);
+ if (host->plat->vdd_handler)
+ pwr |= host->plat->vdd_handler(mmc_dev(mmc), ios->vdd,
+ ios->power_mode);
/* The ST version does not have this, fall through to POWER_ON */
if (host->hw_designer != AMBA_VENDOR_ST) {
pwr |= MCI_PWR_UP;
@@ -555,21 +591,10 @@ static const struct mmc_host_ops mmci_ops = {
.get_cd = mmci_get_cd,
};
-static void mmci_check_status(unsigned long data)
-{
- struct mmci_host *host = (struct mmci_host *)data;
- unsigned int status = mmci_get_cd(host->mmc);
-
- if (status ^ host->oldstat)
- mmc_detect_change(host->mmc, 0);
-
- host->oldstat = status;
- mod_timer(&host->timer, jiffies + HZ);
-}
-
static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id)
{
struct mmci_platform_data *plat = dev->dev.platform_data;
+ struct variant_data *variant = id->data;
struct mmci_host *host;
struct mmc_host *mmc;
int ret;
@@ -613,6 +638,7 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id)
goto clk_free;
host->plat = plat;
+ host->variant = variant;
host->mclk = clk_get_rate(host->clk);
/*
* According to the spec, mclk is max 100 MHz,
@@ -673,6 +699,7 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id)
if (host->vcc == NULL)
mmc->ocr_avail = plat->ocr_mask;
mmc->caps = plat->capabilities;
+ mmc->caps |= MMC_CAP_NEEDS_POLL;
/*
* We can do SGIO
@@ -681,10 +708,11 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id)
mmc->max_phys_segs = NR_SG;
/*
- * Since we only have a 16-bit data length register, we must
- * ensure that we don't exceed 2^16-1 bytes in a single request.
+ * Since only a certain number of bits are valid in the data length
+ * register, we must ensure that we don't exceed 2^num-1 bytes in a
+ * single request.
*/
- mmc->max_req_size = 65535;
+ mmc->max_req_size = (1 << variant->datalength_bits) - 1;
/*
* Set the maximum segment size. Since we aren't doing DMA
@@ -738,7 +766,6 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id)
writel(MCI_IRQENABLE, host->base + MMCIMASK0);
amba_set_drvdata(dev, mmc);
- host->oldstat = mmci_get_cd(host->mmc);
mmc_add_host(mmc);
@@ -746,12 +773,6 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id)
mmc_hostname(mmc), amba_rev(dev), amba_config(dev),
(unsigned long long)dev->res.start, dev->irq[0], dev->irq[1]);
- init_timer(&host->timer);
- host->timer.data = (unsigned long)host;
- host->timer.function = mmci_check_status;
- host->timer.expires = jiffies + HZ;
- add_timer(&host->timer);
-
return 0;
irq0_free:
@@ -785,8 +806,6 @@ static int __devexit mmci_remove(struct amba_device *dev)
if (mmc) {
struct mmci_host *host = mmc_priv(mmc);
- del_timer_sync(&host->timer);
-
mmc_remove_host(mmc);
writel(0, host->base + MMCIMASK0);
@@ -860,19 +879,28 @@ static struct amba_id mmci_ids[] = {
{
.id = 0x00041180,
.mask = 0x000fffff,
+ .data = &variant_arm,
},
{
.id = 0x00041181,
.mask = 0x000fffff,
+ .data = &variant_arm,
},
/* ST Micro variants */
{
.id = 0x00180180,
.mask = 0x00ffffff,
+ .data = &variant_u300,
},
{
.id = 0x00280180,
.mask = 0x00ffffff,
+ .data = &variant_u300,
+ },
+ {
+ .id = 0x00480180,
+ .mask = 0x00ffffff,
+ .data = &variant_ux500,
},
{ 0, 0 },
};
diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h
index d77062e5e3a..68970cfb81e 100644
--- a/drivers/mmc/host/mmci.h
+++ b/drivers/mmc/host/mmci.h
@@ -28,8 +28,6 @@
#define MCI_4BIT_BUS (1 << 11)
/* 8bit wide buses supported in ST Micro versions */
#define MCI_ST_8BIT_BUS (1 << 12)
-/* HW flow control on the ST Micro version */
-#define MCI_ST_FCEN (1 << 13)
#define MMCIARGUMENT 0x008
#define MMCICOMMAND 0x00c
@@ -145,6 +143,7 @@
#define NR_SG 16
struct clk;
+struct variant_data;
struct mmci_host {
void __iomem *base;
@@ -164,6 +163,7 @@ struct mmci_host {
unsigned int cclk;
u32 pwr;
struct mmci_platform_data *plat;
+ struct variant_data *variant;
u8 hw_designer;
u8 hw_revision:4;
@@ -171,42 +171,9 @@ struct mmci_host {
struct timer_list timer;
unsigned int oldstat;
- unsigned int sg_len;
-
/* pio stuff */
- struct scatterlist *sg_ptr;
- unsigned int sg_off;
+ struct sg_mapping_iter sg_miter;
unsigned int size;
struct regulator *vcc;
};
-static inline void mmci_init_sg(struct mmci_host *host, struct mmc_data *data)
-{
- /*
- * Ideally, we want the higher levels to pass us a scatter list.
- */
- host->sg_len = data->sg_len;
- host->sg_ptr = data->sg;
- host->sg_off = 0;
-}
-
-static inline int mmci_next_sg(struct mmci_host *host)
-{
- host->sg_ptr++;
- host->sg_off = 0;
- return --host->sg_len;
-}
-
-static inline char *mmci_kmap_atomic(struct mmci_host *host, unsigned long *flags)
-{
- struct scatterlist *sg = host->sg_ptr;
-
- local_irq_save(*flags);
- return kmap_atomic(sg_page(sg), KM_BIO_SRC_IRQ) + sg->offset;
-}
-
-static inline void mmci_kunmap_atomic(struct mmci_host *host, void *buffer, unsigned long *flags)
-{
- kunmap_atomic(buffer, KM_BIO_SRC_IRQ);
- local_irq_restore(*flags);
-}
diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c
index d9d4a72e0ec..350f78e8624 100644
--- a/drivers/mmc/host/mxcmmc.c
+++ b/drivers/mmc/host/mxcmmc.c
@@ -119,6 +119,7 @@ struct mxcmci_host {
int detect_irq;
int dma;
int do_dma;
+ int default_irq_mask;
int use_sdio;
unsigned int power_mode;
struct imxmmc_platform_data *pdata;
@@ -228,7 +229,7 @@ static int mxcmci_setup_data(struct mxcmci_host *host, struct mmc_data *data)
static int mxcmci_start_cmd(struct mxcmci_host *host, struct mmc_command *cmd,
unsigned int cmdat)
{
- u32 int_cntr;
+ u32 int_cntr = host->default_irq_mask;
unsigned long flags;
WARN_ON(host->cmd != NULL);
@@ -275,7 +276,7 @@ static int mxcmci_start_cmd(struct mxcmci_host *host, struct mmc_command *cmd,
static void mxcmci_finish_request(struct mxcmci_host *host,
struct mmc_request *req)
{
- u32 int_cntr = 0;
+ u32 int_cntr = host->default_irq_mask;
unsigned long flags;
spin_lock_irqsave(&host->lock, flags);
@@ -585,6 +586,9 @@ static irqreturn_t mxcmci_irq(int irq, void *devid)
(stat & (STATUS_DATA_TRANS_DONE | STATUS_WRITE_OP_DONE)))
mxcmci_data_done(host, stat);
#endif
+ if (host->default_irq_mask &&
+ (stat & (STATUS_CARD_INSERTION | STATUS_CARD_REMOVAL)))
+ mmc_detect_change(host->mmc, msecs_to_jiffies(200));
return IRQ_HANDLED;
}
@@ -809,6 +813,12 @@ static int mxcmci_probe(struct platform_device *pdev)
else
mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
+ if (host->pdata && host->pdata->dat3_card_detect)
+ host->default_irq_mask =
+ INT_CARD_INSERTION_EN | INT_CARD_REMOVAL_EN;
+ else
+ host->default_irq_mask = 0;
+
host->res = r;
host->irq = irq;
@@ -835,7 +845,7 @@ static int mxcmci_probe(struct platform_device *pdev)
/* recommended in data sheet */
writew(0x2db4, host->base + MMC_REG_READ_TO);
- writel(0, host->base + MMC_REG_INT_CNTR);
+ writel(host->default_irq_mask, host->base + MMC_REG_INT_CNTR);
#ifdef HAS_DMA
host->dma = imx_dma_request_by_prio(DRIVER_NAME, DMA_PRIO_LOW);
@@ -926,43 +936,47 @@ static int mxcmci_remove(struct platform_device *pdev)
}
#ifdef CONFIG_PM
-static int mxcmci_suspend(struct platform_device *dev, pm_message_t state)
+static int mxcmci_suspend(struct device *dev)
{
- struct mmc_host *mmc = platform_get_drvdata(dev);
+ struct mmc_host *mmc = dev_get_drvdata(dev);
+ struct mxcmci_host *host = mmc_priv(mmc);
int ret = 0;
if (mmc)
ret = mmc_suspend_host(mmc);
+ clk_disable(host->clk);
return ret;
}
-static int mxcmci_resume(struct platform_device *dev)
+static int mxcmci_resume(struct device *dev)
{
- struct mmc_host *mmc = platform_get_drvdata(dev);
- struct mxcmci_host *host;
+ struct mmc_host *mmc = dev_get_drvdata(dev);
+ struct mxcmci_host *host = mmc_priv(mmc);
int ret = 0;
- if (mmc) {
- host = mmc_priv(mmc);
+ clk_enable(host->clk);
+ if (mmc)
ret = mmc_resume_host(mmc);
- }
return ret;
}
-#else
-#define mxcmci_suspend NULL
-#define mxcmci_resume NULL
-#endif /* CONFIG_PM */
+
+static const struct dev_pm_ops mxcmci_pm_ops = {
+ .suspend = mxcmci_suspend,
+ .resume = mxcmci_resume,
+};
+#endif
static struct platform_driver mxcmci_driver = {
.probe = mxcmci_probe,
.remove = mxcmci_remove,
- .suspend = mxcmci_suspend,
- .resume = mxcmci_resume,
.driver = {
.name = DRIVER_NAME,
.owner = THIS_MODULE,
+#ifdef CONFIG_PM
+ .pm = &mxcmci_pm_ops,
+#endif
}
};
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index 82e94389824..0d76b169482 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -623,8 +623,7 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command,
else
host->buf_start = column + mtd->writesize;
- if (mtd->writesize > 512)
- command = NAND_CMD_READ0; /* only READ0 is valid */
+ command = NAND_CMD_READ0; /* only READ0 is valid */
send_cmd(host, command, false);
mxc_do_addr_cycle(mtd, column, page_addr);
@@ -639,31 +638,11 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command,
break;
case NAND_CMD_SEQIN:
- if (column >= mtd->writesize) {
- /*
- * FIXME: before send SEQIN command for write OOB,
- * We must read one page out.
- * For K9F1GXX has no READ1 command to set current HW
- * pointer to spare area, we must write the whole page
- * including OOB together.
- */
- if (mtd->writesize > 512)
- /* call ourself to read a page */
- mxc_nand_command(mtd, NAND_CMD_READ0, 0,
- page_addr);
-
- host->buf_start = column;
-
- /* Set program pointer to spare region */
- if (mtd->writesize == 512)
- send_cmd(host, NAND_CMD_READOOB, false);
- } else {
- host->buf_start = column;
+ if (column >= mtd->writesize)
+ /* call ourself to read a page */
+ mxc_nand_command(mtd, NAND_CMD_READ0, 0, page_addr);
- /* Set program pointer to page start */
- if (mtd->writesize == 512)
- send_cmd(host, NAND_CMD_READ0, false);
- }
+ host->buf_start = column;
send_cmd(host, command, false);
mxc_do_addr_cycle(mtd, column, page_addr);
@@ -853,6 +832,8 @@ static int __init mxcnd_probe(struct platform_device *pdev)
parse_mtd_partitions(mtd, part_probes, &host->parts, 0);
if (nr_parts > 0)
add_mtd_partitions(mtd, host->parts, nr_parts);
+ else if (pdata->parts)
+ add_mtd_partitions(mtd, pdata->parts, pdata->nr_parts);
else
#endif
{
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 78b74e83ce5..5a1bd5db2a9 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -29,6 +29,7 @@
#include <linux/mii.h>
#include <linux/ethtool.h>
#include <linux/phy.h>
+#include <linux/marvell_phy.h>
#include <asm/io.h>
#include <asm/irq.h>
@@ -48,8 +49,6 @@
#define MII_M1145_RGMII_RX_DELAY 0x0080
#define MII_M1145_RGMII_TX_DELAY 0x0002
-#define M1145_DEV_FLAGS_RESISTANCE 0x00000001
-
#define MII_M1111_PHY_LED_CONTROL 0x18
#define MII_M1111_PHY_LED_DIRECT 0x4100
#define MII_M1111_PHY_LED_COMBINE 0x411c
@@ -350,7 +349,10 @@ static int m88e1118_config_init(struct phy_device *phydev)
return err;
/* Adjust LED Control */
- err = phy_write(phydev, 0x10, 0x021e);
+ if (phydev->dev_flags & MARVELL_PHY_M1118_DNS323_LEDS)
+ err = phy_write(phydev, 0x10, 0x1100);
+ else
+ err = phy_write(phydev, 0x10, 0x021e);
if (err < 0)
return err;
@@ -398,7 +400,7 @@ static int m88e1145_config_init(struct phy_device *phydev)
if (err < 0)
return err;
- if (phydev->dev_flags & M1145_DEV_FLAGS_RESISTANCE) {
+ if (phydev->dev_flags & MARVELL_PHY_M1145_FLAGS_RESISTANCE) {
err = phy_write(phydev, 0x1d, 0x0012);
if (err < 0)
return err;
@@ -529,8 +531,8 @@ static int m88e1121_did_interrupt(struct phy_device *phydev)
static struct phy_driver marvell_drivers[] = {
{
- .phy_id = 0x01410c60,
- .phy_id_mask = 0xfffffff0,
+ .phy_id = MARVELL_PHY_ID_88E1101,
+ .phy_id_mask = MARVELL_PHY_ID_MASK,
.name = "Marvell 88E1101",
.features = PHY_GBIT_FEATURES,
.flags = PHY_HAS_INTERRUPT,
@@ -541,8 +543,8 @@ static struct phy_driver marvell_drivers[] = {
.driver = { .owner = THIS_MODULE },
},
{
- .phy_id = 0x01410c90,
- .phy_id_mask = 0xfffffff0,
+ .phy_id = MARVELL_PHY_ID_88E1112,
+ .phy_id_mask = MARVELL_PHY_ID_MASK,
.name = "Marvell 88E1112",
.features = PHY_GBIT_FEATURES,
.flags = PHY_HAS_INTERRUPT,
@@ -554,8 +556,8 @@ static struct phy_driver marvell_drivers[] = {
.driver = { .owner = THIS_MODULE },
},
{
- .phy_id = 0x01410cc0,
- .phy_id_mask = 0xfffffff0,
+ .phy_id = MARVELL_PHY_ID_88E1111,
+ .phy_id_mask = MARVELL_PHY_ID_MASK,
.name = "Marvell 88E1111",
.features = PHY_GBIT_FEATURES,
.flags = PHY_HAS_INTERRUPT,
@@ -567,8 +569,8 @@ static struct phy_driver marvell_drivers[] = {
.driver = { .owner = THIS_MODULE },
},
{
- .phy_id = 0x01410e10,
- .phy_id_mask = 0xfffffff0,
+ .phy_id = MARVELL_PHY_ID_88E1118,
+ .phy_id_mask = MARVELL_PHY_ID_MASK,
.name = "Marvell 88E1118",
.features = PHY_GBIT_FEATURES,
.flags = PHY_HAS_INTERRUPT,
@@ -580,8 +582,8 @@ static struct phy_driver marvell_drivers[] = {
.driver = {.owner = THIS_MODULE,},
},
{
- .phy_id = 0x01410cb0,
- .phy_id_mask = 0xfffffff0,
+ .phy_id = MARVELL_PHY_ID_88E1121R,
+ .phy_id_mask = MARVELL_PHY_ID_MASK,
.name = "Marvell 88E1121R",
.features = PHY_GBIT_FEATURES,
.flags = PHY_HAS_INTERRUPT,
@@ -593,8 +595,8 @@ static struct phy_driver marvell_drivers[] = {
.driver = { .owner = THIS_MODULE },
},
{
- .phy_id = 0x01410cd0,
- .phy_id_mask = 0xfffffff0,
+ .phy_id = MARVELL_PHY_ID_88E1145,
+ .phy_id_mask = MARVELL_PHY_ID_MASK,
.name = "Marvell 88E1145",
.features = PHY_GBIT_FEATURES,
.flags = PHY_HAS_INTERRUPT,
@@ -606,8 +608,8 @@ static struct phy_driver marvell_drivers[] = {
.driver = { .owner = THIS_MODULE },
},
{
- .phy_id = 0x01410e30,
- .phy_id_mask = 0xfffffff0,
+ .phy_id = MARVELL_PHY_ID_88E1240,
+ .phy_id_mask = MARVELL_PHY_ID_MASK,
.name = "Marvell 88E1240",
.features = PHY_GBIT_FEATURES,
.flags = PHY_HAS_INTERRUPT,
diff --git a/drivers/parisc/led.c b/drivers/parisc/led.c
index 188bc8496a2..d02be78a413 100644
--- a/drivers/parisc/led.c
+++ b/drivers/parisc/led.c
@@ -176,16 +176,18 @@ static ssize_t led_proc_write(struct file *file, const char *buf,
size_t count, loff_t *pos)
{
void *data = PDE(file->f_path.dentry->d_inode)->data;
- char *cur, lbuf[count + 1];
+ char *cur, lbuf[32];
int d;
if (!capable(CAP_SYS_ADMIN))
return -EACCES;
- memset(lbuf, 0, count + 1);
+ if (count >= sizeof(lbuf))
+ count = sizeof(lbuf)-1;
if (copy_from_user(lbuf, buf, count))
return -EFAULT;
+ lbuf[count] = 0;
cur = lbuf;
diff --git a/drivers/rtc/rtc-pl031.c b/drivers/rtc/rtc-pl031.c
index 3587d9922f2..71bbefc3544 100644
--- a/drivers/rtc/rtc-pl031.c
+++ b/drivers/rtc/rtc-pl031.c
@@ -456,7 +456,7 @@ static struct rtc_class_ops stv2_pl031_ops = {
.irq_set_freq = pl031_irq_set_freq,
};
-static struct amba_id pl031_ids[] __initdata = {
+static struct amba_id pl031_ids[] = {
{
.id = 0x00041031,
.mask = 0x000fffff,
diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c
index b09a638d051..50441ffe8e3 100644
--- a/drivers/serial/amba-pl010.c
+++ b/drivers/serial/amba-pl010.c
@@ -782,7 +782,7 @@ static int pl010_resume(struct amba_device *dev)
return 0;
}
-static struct amba_id pl010_ids[] __initdata = {
+static struct amba_id pl010_ids[] = {
{
.id = 0x00041010,
.mask = 0x000fffff,
diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c
index eb4cb480b93..6ca7a44f29c 100644
--- a/drivers/serial/amba-pl011.c
+++ b/drivers/serial/amba-pl011.c
@@ -69,9 +69,12 @@
struct uart_amba_port {
struct uart_port port;
struct clk *clk;
- unsigned int im; /* interrupt mask */
+ unsigned int im; /* interrupt mask */
unsigned int old_status;
- unsigned int ifls; /* vendor-specific */
+ unsigned int ifls; /* vendor-specific */
+ unsigned int lcrh_tx; /* vendor-specific */
+ unsigned int lcrh_rx; /* vendor-specific */
+ bool oversampling; /* vendor-specific */
bool autorts;
};
@@ -79,16 +82,25 @@ struct uart_amba_port {
struct vendor_data {
unsigned int ifls;
unsigned int fifosize;
+ unsigned int lcrh_tx;
+ unsigned int lcrh_rx;
+ bool oversampling;
};
static struct vendor_data vendor_arm = {
.ifls = UART011_IFLS_RX4_8|UART011_IFLS_TX4_8,
.fifosize = 16,
+ .lcrh_tx = UART011_LCRH,
+ .lcrh_rx = UART011_LCRH,
+ .oversampling = false,
};
static struct vendor_data vendor_st = {
.ifls = UART011_IFLS_RX_HALF|UART011_IFLS_TX_HALF,
.fifosize = 64,
+ .lcrh_tx = ST_UART011_LCRH_TX,
+ .lcrh_rx = ST_UART011_LCRH_RX,
+ .oversampling = true,
};
static void pl011_stop_tx(struct uart_port *port)
@@ -327,12 +339,12 @@ static void pl011_break_ctl(struct uart_port *port, int break_state)
unsigned int lcr_h;
spin_lock_irqsave(&uap->port.lock, flags);
- lcr_h = readw(uap->port.membase + UART011_LCRH);
+ lcr_h = readw(uap->port.membase + uap->lcrh_tx);
if (break_state == -1)
lcr_h |= UART01x_LCRH_BRK;
else
lcr_h &= ~UART01x_LCRH_BRK;
- writew(lcr_h, uap->port.membase + UART011_LCRH);
+ writew(lcr_h, uap->port.membase + uap->lcrh_tx);
spin_unlock_irqrestore(&uap->port.lock, flags);
}
@@ -393,7 +405,17 @@ static int pl011_startup(struct uart_port *port)
writew(cr, uap->port.membase + UART011_CR);
writew(0, uap->port.membase + UART011_FBRD);
writew(1, uap->port.membase + UART011_IBRD);
- writew(0, uap->port.membase + UART011_LCRH);
+ writew(0, uap->port.membase + uap->lcrh_rx);
+ if (uap->lcrh_tx != uap->lcrh_rx) {
+ int i;
+ /*
+ * Wait 10 PCLKs before writing LCRH_TX register,
+ * to get this delay write read only register 10 times
+ */
+ for (i = 0; i < 10; ++i)
+ writew(0xff, uap->port.membase + UART011_MIS);
+ writew(0, uap->port.membase + uap->lcrh_tx);
+ }
writew(0, uap->port.membase + UART01x_DR);
while (readw(uap->port.membase + UART01x_FR) & UART01x_FR_BUSY)
barrier();
@@ -422,10 +444,19 @@ static int pl011_startup(struct uart_port *port)
return retval;
}
+static void pl011_shutdown_channel(struct uart_amba_port *uap,
+ unsigned int lcrh)
+{
+ unsigned long val;
+
+ val = readw(uap->port.membase + lcrh);
+ val &= ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN);
+ writew(val, uap->port.membase + lcrh);
+}
+
static void pl011_shutdown(struct uart_port *port)
{
struct uart_amba_port *uap = (struct uart_amba_port *)port;
- unsigned long val;
/*
* disable all interrupts
@@ -450,9 +481,9 @@ static void pl011_shutdown(struct uart_port *port)
/*
* disable break condition and fifos
*/
- val = readw(uap->port.membase + UART011_LCRH);
- val &= ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN);
- writew(val, uap->port.membase + UART011_LCRH);
+ pl011_shutdown_channel(uap, uap->lcrh_rx);
+ if (uap->lcrh_rx != uap->lcrh_tx)
+ pl011_shutdown_channel(uap, uap->lcrh_tx);
/*
* Shut down the clock producer
@@ -472,8 +503,13 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios,
/*
* Ask the core to calculate the divisor for us.
*/
- baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
- quot = port->uartclk * 4 / baud;
+ baud = uart_get_baud_rate(port, termios, old, 0,
+ port->uartclk/(uap->oversampling ? 8 : 16));
+
+ if (baud > port->uartclk/16)
+ quot = DIV_ROUND_CLOSEST(port->uartclk * 8, baud);
+ else
+ quot = DIV_ROUND_CLOSEST(port->uartclk * 4, baud);
switch (termios->c_cflag & CSIZE) {
case CS5:
@@ -552,6 +588,13 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios,
uap->autorts = false;
}
+ if (uap->oversampling) {
+ if (baud > port->uartclk/16)
+ old_cr |= ST_UART011_CR_OVSFACT;
+ else
+ old_cr &= ~ST_UART011_CR_OVSFACT;
+ }
+
/* Set baud rate */
writew(quot & 0x3f, port->membase + UART011_FBRD);
writew(quot >> 6, port->membase + UART011_IBRD);
@@ -561,7 +604,17 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios,
* NOTE: MUST BE WRITTEN AFTER UARTLCR_M & UARTLCR_L
* ----------^----------^----------^----------^-----
*/
- writew(lcr_h, port->membase + UART011_LCRH);
+ writew(lcr_h, port->membase + uap->lcrh_rx);
+ if (uap->lcrh_rx != uap->lcrh_tx) {
+ int i;
+ /*
+ * Wait 10 PCLKs before writing LCRH_TX register,
+ * to get this delay write read only register 10 times
+ */
+ for (i = 0; i < 10; ++i)
+ writew(0xff, uap->port.membase + UART011_MIS);
+ writew(lcr_h, port->membase + uap->lcrh_tx);
+ }
writew(old_cr, port->membase + UART011_CR);
spin_unlock_irqrestore(&port->lock, flags);
@@ -688,7 +741,7 @@ pl011_console_get_options(struct uart_amba_port *uap, int *baud,
if (readw(uap->port.membase + UART011_CR) & UART01x_CR_UARTEN) {
unsigned int lcr_h, ibrd, fbrd;
- lcr_h = readw(uap->port.membase + UART011_LCRH);
+ lcr_h = readw(uap->port.membase + uap->lcrh_tx);
*parity = 'n';
if (lcr_h & UART01x_LCRH_PEN) {
@@ -707,6 +760,12 @@ pl011_console_get_options(struct uart_amba_port *uap, int *baud,
fbrd = readw(uap->port.membase + UART011_FBRD);
*baud = uap->port.uartclk * 4 / (64 * ibrd + fbrd);
+
+ if (uap->oversampling) {
+ if (readw(uap->port.membase + UART011_CR)
+ & ST_UART011_CR_OVSFACT)
+ *baud *= 2;
+ }
}
}
@@ -800,6 +859,9 @@ static int pl011_probe(struct amba_device *dev, struct amba_id *id)
}
uap->ifls = vendor->ifls;
+ uap->lcrh_rx = vendor->lcrh_rx;
+ uap->lcrh_tx = vendor->lcrh_tx;
+ uap->oversampling = vendor->oversampling;
uap->port.dev = &dev->dev;
uap->port.mapbase = dev->res.start;
uap->port.membase = base;
@@ -868,7 +930,7 @@ static int pl011_resume(struct amba_device *dev)
}
#endif
-static struct amba_id pl011_ids[] __initdata = {
+static struct amba_id pl011_ids[] = {
{
.id = 0x00041011,
.mask = 0x000fffff,
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index eaa79c8a9b8..93ead19507b 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -76,11 +76,12 @@
static const char driver_name [] = "at91_udc";
static const char ep0name[] = "ep0";
+#define VBUS_POLL_TIMEOUT msecs_to_jiffies(1000)
-#define at91_udp_read(dev, reg) \
- __raw_readl((dev)->udp_baseaddr + (reg))
-#define at91_udp_write(dev, reg, val) \
- __raw_writel((val), (dev)->udp_baseaddr + (reg))
+#define at91_udp_read(udc, reg) \
+ __raw_readl((udc)->udp_baseaddr + (reg))
+#define at91_udp_write(udc, reg, val) \
+ __raw_writel((val), (udc)->udp_baseaddr + (reg))
/*-------------------------------------------------------------------------*/
@@ -102,8 +103,9 @@ static void proc_ep_show(struct seq_file *s, struct at91_ep *ep)
u32 csr;
struct at91_request *req;
unsigned long flags;
+ struct at91_udc *udc = ep->udc;
- local_irq_save(flags);
+ spin_lock_irqsave(&udc->lock, flags);
csr = __raw_readl(ep->creg);
@@ -147,7 +149,7 @@ static void proc_ep_show(struct seq_file *s, struct at91_ep *ep)
&req->req, length,
req->req.length, req->req.buf);
}
- local_irq_restore(flags);
+ spin_unlock_irqrestore(&udc->lock, flags);
}
static void proc_irq_show(struct seq_file *s, const char *label, u32 mask)
@@ -272,7 +274,9 @@ static void done(struct at91_ep *ep, struct at91_request *req, int status)
VDBG("%s done %p, status %d\n", ep->ep.name, req, status);
ep->stopped = 1;
+ spin_unlock(&udc->lock);
req->req.complete(&ep->ep, &req->req);
+ spin_lock(&udc->lock);
ep->stopped = stopped;
/* ep0 is always ready; other endpoints need a non-empty queue */
@@ -472,7 +476,7 @@ static int at91_ep_enable(struct usb_ep *_ep,
const struct usb_endpoint_descriptor *desc)
{
struct at91_ep *ep = container_of(_ep, struct at91_ep, ep);
- struct at91_udc *dev = ep->udc;
+ struct at91_udc *udc = ep->udc;
u16 maxpacket;
u32 tmp;
unsigned long flags;
@@ -487,7 +491,7 @@ static int at91_ep_enable(struct usb_ep *_ep,
return -EINVAL;
}
- if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) {
+ if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN) {
DBG("bogus device state\n");
return -ESHUTDOWN;
}
@@ -521,7 +525,7 @@ bogus_max:
}
ok:
- local_irq_save(flags);
+ spin_lock_irqsave(&udc->lock, flags);
/* initialize endpoint to match this descriptor */
ep->is_in = usb_endpoint_dir_in(desc);
@@ -540,10 +544,10 @@ ok:
* reset/init endpoint fifo. NOTE: leaves fifo_bank alone,
* since endpoint resets don't reset hw pingpong state.
*/
- at91_udp_write(dev, AT91_UDP_RST_EP, ep->int_mask);
- at91_udp_write(dev, AT91_UDP_RST_EP, 0);
+ at91_udp_write(udc, AT91_UDP_RST_EP, ep->int_mask);
+ at91_udp_write(udc, AT91_UDP_RST_EP, 0);
- local_irq_restore(flags);
+ spin_unlock_irqrestore(&udc->lock, flags);
return 0;
}
@@ -556,7 +560,7 @@ static int at91_ep_disable (struct usb_ep * _ep)
if (ep == &ep->udc->ep[0])
return -EINVAL;
- local_irq_save(flags);
+ spin_lock_irqsave(&udc->lock, flags);
nuke(ep, -ESHUTDOWN);
@@ -571,7 +575,7 @@ static int at91_ep_disable (struct usb_ep * _ep)
__raw_writel(0, ep->creg);
}
- local_irq_restore(flags);
+ spin_unlock_irqrestore(&udc->lock, flags);
return 0;
}
@@ -607,7 +611,7 @@ static int at91_ep_queue(struct usb_ep *_ep,
{
struct at91_request *req;
struct at91_ep *ep;
- struct at91_udc *dev;
+ struct at91_udc *udc;
int status;
unsigned long flags;
@@ -625,9 +629,9 @@ static int at91_ep_queue(struct usb_ep *_ep,
return -EINVAL;
}
- dev = ep->udc;
+ udc = ep->udc;
- if (!dev || !dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) {
+ if (!udc || !udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN) {
DBG("invalid device\n");
return -EINVAL;
}
@@ -635,7 +639,7 @@ static int at91_ep_queue(struct usb_ep *_ep,
_req->status = -EINPROGRESS;
_req->actual = 0;
- local_irq_save(flags);
+ spin_lock_irqsave(&udc->lock, flags);
/* try to kickstart any empty and idle queue */
if (list_empty(&ep->queue) && !ep->stopped) {
@@ -653,7 +657,7 @@ static int at91_ep_queue(struct usb_ep *_ep,
if (is_ep0) {
u32 tmp;
- if (!dev->req_pending) {
+ if (!udc->req_pending) {
status = -EINVAL;
goto done;
}
@@ -662,11 +666,11 @@ static int at91_ep_queue(struct usb_ep *_ep,
* defer changing CONFG until after the gadget driver
* reconfigures the endpoints.
*/
- if (dev->wait_for_config_ack) {
- tmp = at91_udp_read(dev, AT91_UDP_GLB_STAT);
+ if (udc->wait_for_config_ack) {
+ tmp = at91_udp_read(udc, AT91_UDP_GLB_STAT);
tmp ^= AT91_UDP_CONFG;
VDBG("toggle config\n");
- at91_udp_write(dev, AT91_UDP_GLB_STAT, tmp);
+ at91_udp_write(udc, AT91_UDP_GLB_STAT, tmp);
}
if (req->req.length == 0) {
ep0_in_status:
@@ -676,7 +680,7 @@ ep0_in_status:
tmp &= ~SET_FX;
tmp |= CLR_FX | AT91_UDP_TXPKTRDY;
__raw_writel(tmp, ep->creg);
- dev->req_pending = 0;
+ udc->req_pending = 0;
goto done;
}
}
@@ -695,31 +699,40 @@ ep0_in_status:
if (req && !status) {
list_add_tail (&req->queue, &ep->queue);
- at91_udp_write(dev, AT91_UDP_IER, ep->int_mask);
+ at91_udp_write(udc, AT91_UDP_IER, ep->int_mask);
}
done:
- local_irq_restore(flags);
+ spin_unlock_irqrestore(&udc->lock, flags);
return (status < 0) ? status : 0;
}
static int at91_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
{
- struct at91_ep *ep;
+ struct at91_ep *ep;
struct at91_request *req;
+ unsigned long flags;
+ struct at91_udc *udc;
ep = container_of(_ep, struct at91_ep, ep);
if (!_ep || ep->ep.name == ep0name)
return -EINVAL;
+ udc = ep->udc;
+
+ spin_lock_irqsave(&udc->lock, flags);
+
/* make sure it's actually queued on this endpoint */
list_for_each_entry (req, &ep->queue, queue) {
if (&req->req == _req)
break;
}
- if (&req->req != _req)
+ if (&req->req != _req) {
+ spin_unlock_irqrestore(&udc->lock, flags);
return -EINVAL;
+ }
done(ep, req, -ECONNRESET);
+ spin_unlock_irqrestore(&udc->lock, flags);
return 0;
}
@@ -736,7 +749,7 @@ static int at91_ep_set_halt(struct usb_ep *_ep, int value)
return -EINVAL;
creg = ep->creg;
- local_irq_save(flags);
+ spin_lock_irqsave(&udc->lock, flags);
csr = __raw_readl(creg);
@@ -761,7 +774,7 @@ static int at91_ep_set_halt(struct usb_ep *_ep, int value)
__raw_writel(csr, creg);
}
- local_irq_restore(flags);
+ spin_unlock_irqrestore(&udc->lock, flags);
return status;
}
@@ -795,7 +808,7 @@ static int at91_wakeup(struct usb_gadget *gadget)
unsigned long flags;
DBG("%s\n", __func__ );
- local_irq_save(flags);
+ spin_lock_irqsave(&udc->lock, flags);
if (!udc->clocked || !udc->suspended)
goto done;
@@ -809,7 +822,7 @@ static int at91_wakeup(struct usb_gadget *gadget)
at91_udp_write(udc, AT91_UDP_GLB_STAT, glbstate);
done:
- local_irq_restore(flags);
+ spin_unlock_irqrestore(&udc->lock, flags);
return status;
}
@@ -851,8 +864,11 @@ static void stop_activity(struct at91_udc *udc)
ep->stopped = 1;
nuke(ep, -ESHUTDOWN);
}
- if (driver)
+ if (driver) {
+ spin_unlock(&udc->lock);
driver->disconnect(&udc->gadget);
+ spin_lock(&udc->lock);
+ }
udc_reinit(udc);
}
@@ -935,13 +951,13 @@ static int at91_vbus_session(struct usb_gadget *gadget, int is_active)
unsigned long flags;
// VDBG("vbus %s\n", is_active ? "on" : "off");
- local_irq_save(flags);
+ spin_lock_irqsave(&udc->lock, flags);
udc->vbus = (is_active != 0);
if (udc->driver)
pullup(udc, is_active);
else
pullup(udc, 0);
- local_irq_restore(flags);
+ spin_unlock_irqrestore(&udc->lock, flags);
return 0;
}
@@ -950,10 +966,10 @@ static int at91_pullup(struct usb_gadget *gadget, int is_on)
struct at91_udc *udc = to_udc(gadget);
unsigned long flags;
- local_irq_save(flags);
+ spin_lock_irqsave(&udc->lock, flags);
udc->enabled = is_on = !!is_on;
pullup(udc, is_on);
- local_irq_restore(flags);
+ spin_unlock_irqrestore(&udc->lock, flags);
return 0;
}
@@ -962,9 +978,9 @@ static int at91_set_selfpowered(struct usb_gadget *gadget, int is_on)
struct at91_udc *udc = to_udc(gadget);
unsigned long flags;
- local_irq_save(flags);
+ spin_lock_irqsave(&udc->lock, flags);
udc->selfpowered = (is_on != 0);
- local_irq_restore(flags);
+ spin_unlock_irqrestore(&udc->lock, flags);
return 0;
}
@@ -1226,8 +1242,11 @@ static void handle_setup(struct at91_udc *udc, struct at91_ep *ep, u32 csr)
#undef w_length
/* pass request up to the gadget driver */
- if (udc->driver)
+ if (udc->driver) {
+ spin_unlock(&udc->lock);
status = udc->driver->setup(&udc->gadget, &pkt.r);
+ spin_lock(&udc->lock);
+ }
else
status = -ENODEV;
if (status < 0) {
@@ -1378,6 +1397,9 @@ static irqreturn_t at91_udc_irq (int irq, void *_udc)
struct at91_udc *udc = _udc;
u32 rescans = 5;
int disable_clock = 0;
+ unsigned long flags;
+
+ spin_lock_irqsave(&udc->lock, flags);
if (!udc->clocked) {
clk_on(udc);
@@ -1433,8 +1455,11 @@ static irqreturn_t at91_udc_irq (int irq, void *_udc)
* and then into standby to avoid drawing more than
* 500uA power (2500uA for some high-power configs).
*/
- if (udc->driver && udc->driver->suspend)
+ if (udc->driver && udc->driver->suspend) {
+ spin_unlock(&udc->lock);
udc->driver->suspend(&udc->gadget);
+ spin_lock(&udc->lock);
+ }
/* host initiated resume */
} else if (status & AT91_UDP_RXRSM) {
@@ -1451,8 +1476,11 @@ static irqreturn_t at91_udc_irq (int irq, void *_udc)
* would normally want to switch out of slow clock
* mode into normal mode.
*/
- if (udc->driver && udc->driver->resume)
+ if (udc->driver && udc->driver->resume) {
+ spin_unlock(&udc->lock);
udc->driver->resume(&udc->gadget);
+ spin_lock(&udc->lock);
+ }
/* endpoint IRQs are cleared by handling them */
} else {
@@ -1474,6 +1502,8 @@ static irqreturn_t at91_udc_irq (int irq, void *_udc)
if (disable_clock)
clk_off(udc);
+ spin_unlock_irqrestore(&udc->lock, flags);
+
return IRQ_HANDLED;
}
@@ -1556,24 +1586,53 @@ static struct at91_udc controller = {
/* ep6 and ep7 are also reserved (custom silicon might use them) */
};
+static void at91_vbus_update(struct at91_udc *udc, unsigned value)
+{
+ value ^= udc->board.vbus_active_low;
+ if (value != udc->vbus)
+ at91_vbus_session(&udc->gadget, value);
+}
+
static irqreturn_t at91_vbus_irq(int irq, void *_udc)
{
struct at91_udc *udc = _udc;
- unsigned value;
/* vbus needs at least brief debouncing */
udelay(10);
- value = gpio_get_value(udc->board.vbus_pin);
- if (value != udc->vbus)
- at91_vbus_session(&udc->gadget, value);
+ at91_vbus_update(udc, gpio_get_value(udc->board.vbus_pin));
return IRQ_HANDLED;
}
+static void at91_vbus_timer_work(struct work_struct *work)
+{
+ struct at91_udc *udc = container_of(work, struct at91_udc,
+ vbus_timer_work);
+
+ at91_vbus_update(udc, gpio_get_value_cansleep(udc->board.vbus_pin));
+
+ if (!timer_pending(&udc->vbus_timer))
+ mod_timer(&udc->vbus_timer, jiffies + VBUS_POLL_TIMEOUT);
+}
+
+static void at91_vbus_timer(unsigned long data)
+{
+ struct at91_udc *udc = (struct at91_udc *)data;
+
+ /*
+ * If we are polling vbus it is likely that the gpio is on an
+ * bus such as i2c or spi which may sleep, so schedule some work
+ * to read the vbus gpio
+ */
+ if (!work_pending(&udc->vbus_timer_work))
+ schedule_work(&udc->vbus_timer_work);
+}
+
int usb_gadget_register_driver (struct usb_gadget_driver *driver)
{
struct at91_udc *udc = &controller;
int retval;
+ unsigned long flags;
if (!driver
|| driver->speed < USB_SPEED_FULL
@@ -1605,9 +1664,9 @@ int usb_gadget_register_driver (struct usb_gadget_driver *driver)
return retval;
}
- local_irq_disable();
+ spin_lock_irqsave(&udc->lock, flags);
pullup(udc, 1);
- local_irq_enable();
+ spin_unlock_irqrestore(&udc->lock, flags);
DBG("bound to %s\n", driver->driver.name);
return 0;
@@ -1617,15 +1676,16 @@ EXPORT_SYMBOL (usb_gadget_register_driver);
int usb_gadget_unregister_driver (struct usb_gadget_driver *driver)
{
struct at91_udc *udc = &controller;
+ unsigned long flags;
if (!driver || driver != udc->driver || !driver->unbind)
return -EINVAL;
- local_irq_disable();
+ spin_lock_irqsave(&udc->lock, flags);
udc->enabled = 0;
at91_udp_write(udc, AT91_UDP_IDR, ~0);
pullup(udc, 0);
- local_irq_enable();
+ spin_unlock_irqrestore(&udc->lock, flags);
driver->unbind(&udc->gadget);
udc->gadget.dev.driver = NULL;
@@ -1641,8 +1701,13 @@ EXPORT_SYMBOL (usb_gadget_unregister_driver);
static void at91udc_shutdown(struct platform_device *dev)
{
+ struct at91_udc *udc = platform_get_drvdata(dev);
+ unsigned long flags;
+
/* force disconnect on reboot */
+ spin_lock_irqsave(&udc->lock, flags);
pullup(platform_get_drvdata(dev), 0);
+ spin_unlock_irqrestore(&udc->lock, flags);
}
static int __init at91udc_probe(struct platform_device *pdev)
@@ -1683,6 +1748,7 @@ static int __init at91udc_probe(struct platform_device *pdev)
udc->board = *(struct at91_udc_data *) dev->platform_data;
udc->pdev = pdev;
udc->enabled = 0;
+ spin_lock_init(&udc->lock);
/* rm9200 needs manual D+ pullup; off by default */
if (cpu_is_at91rm9200()) {
@@ -1763,13 +1829,23 @@ static int __init at91udc_probe(struct platform_device *pdev)
* Get the initial state of VBUS - we cannot expect
* a pending interrupt.
*/
- udc->vbus = gpio_get_value(udc->board.vbus_pin);
- if (request_irq(udc->board.vbus_pin, at91_vbus_irq,
- IRQF_DISABLED, driver_name, udc)) {
- DBG("request vbus irq %d failed\n",
- udc->board.vbus_pin);
- retval = -EBUSY;
- goto fail3;
+ udc->vbus = gpio_get_value_cansleep(udc->board.vbus_pin) ^
+ udc->board.vbus_active_low;
+
+ if (udc->board.vbus_polled) {
+ INIT_WORK(&udc->vbus_timer_work, at91_vbus_timer_work);
+ setup_timer(&udc->vbus_timer, at91_vbus_timer,
+ (unsigned long)udc);
+ mod_timer(&udc->vbus_timer,
+ jiffies + VBUS_POLL_TIMEOUT);
+ } else {
+ if (request_irq(udc->board.vbus_pin, at91_vbus_irq,
+ IRQF_DISABLED, driver_name, udc)) {
+ DBG("request vbus irq %d failed\n",
+ udc->board.vbus_pin);
+ retval = -EBUSY;
+ goto fail3;
+ }
}
} else {
DBG("no VBUS detection, assuming always-on\n");
@@ -1804,13 +1880,16 @@ static int __exit at91udc_remove(struct platform_device *pdev)
{
struct at91_udc *udc = platform_get_drvdata(pdev);
struct resource *res;
+ unsigned long flags;
DBG("remove\n");
if (udc->driver)
return -EBUSY;
+ spin_lock_irqsave(&udc->lock, flags);
pullup(udc, 0);
+ spin_unlock_irqrestore(&udc->lock, flags);
device_init_wakeup(&pdev->dev, 0);
remove_debug_file(udc);
@@ -1840,6 +1919,7 @@ static int at91udc_suspend(struct platform_device *pdev, pm_message_t mesg)
{
struct at91_udc *udc = platform_get_drvdata(pdev);
int wake = udc->driver && device_may_wakeup(&pdev->dev);
+ unsigned long flags;
/* Unless we can act normally to the host (letting it wake us up
* whenever it has work for us) force disconnect. Wakeup requires
@@ -1849,13 +1929,15 @@ static int at91udc_suspend(struct platform_device *pdev, pm_message_t mesg)
if ((!udc->suspended && udc->addr)
|| !wake
|| at91_suspend_entering_slow_clock()) {
+ spin_lock_irqsave(&udc->lock, flags);
pullup(udc, 0);
wake = 0;
+ spin_unlock_irqrestore(&udc->lock, flags);
} else
enable_irq_wake(udc->udp_irq);
udc->active_suspend = wake;
- if (udc->board.vbus_pin > 0 && wake)
+ if (udc->board.vbus_pin > 0 && !udc->board.vbus_polled && wake)
enable_irq_wake(udc->board.vbus_pin);
return 0;
}
@@ -1863,15 +1945,20 @@ static int at91udc_suspend(struct platform_device *pdev, pm_message_t mesg)
static int at91udc_resume(struct platform_device *pdev)
{
struct at91_udc *udc = platform_get_drvdata(pdev);
+ unsigned long flags;
- if (udc->board.vbus_pin > 0 && udc->active_suspend)
+ if (udc->board.vbus_pin > 0 && !udc->board.vbus_polled &&
+ udc->active_suspend)
disable_irq_wake(udc->board.vbus_pin);
/* maybe reconnect to host; if so, clocks on */
if (udc->active_suspend)
disable_irq_wake(udc->udp_irq);
- else
+ else {
+ spin_lock_irqsave(&udc->lock, flags);
pullup(udc, 1);
+ spin_unlock_irqrestore(&udc->lock, flags);
+ }
return 0;
}
#else
diff --git a/drivers/usb/gadget/at91_udc.h b/drivers/usb/gadget/at91_udc.h
index c65d6229589..108ca54f909 100644
--- a/drivers/usb/gadget/at91_udc.h
+++ b/drivers/usb/gadget/at91_udc.h
@@ -144,6 +144,9 @@ struct at91_udc {
struct proc_dir_entry *pde;
void __iomem *udp_baseaddr;
int udp_irq;
+ spinlock_t lock;
+ struct timer_list vbus_timer;
+ struct work_struct vbus_timer_work;
};
static inline struct at91_udc *to_udc(struct usb_gadget *g)
diff --git a/drivers/usb/gadget/fsl_mxc_udc.c b/drivers/usb/gadget/fsl_mxc_udc.c
index d0b8bde59e5..eafa6d2c5ed 100644
--- a/drivers/usb/gadget/fsl_mxc_udc.c
+++ b/drivers/usb/gadget/fsl_mxc_udc.c
@@ -30,7 +30,7 @@ int fsl_udc_clk_init(struct platform_device *pdev)
pdata = pdev->dev.platform_data;
- if (!cpu_is_mx35()) {
+ if (!cpu_is_mx35() && !cpu_is_mx25()) {
mxc_ahb_clk = clk_get(&pdev->dev, "usb_ahb");
if (IS_ERR(mxc_ahb_clk))
return PTR_ERR(mxc_ahb_clk);
diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c
index bd4027745aa..a8ad8ac120a 100644
--- a/drivers/usb/host/ehci-mxc.c
+++ b/drivers/usb/host/ehci-mxc.c
@@ -182,7 +182,7 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev)
}
clk_enable(priv->usbclk);
- if (!cpu_is_mx35()) {
+ if (!cpu_is_mx35() && !cpu_is_mx25()) {
priv->ahbclk = clk_get(dev, "usb_ahb");
if (IS_ERR(priv->ahbclk)) {
ret = PTR_ERR(priv->ahbclk);
diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c
index b4b6deceed1..43f0639b1c1 100644
--- a/drivers/video/imxfb.c
+++ b/drivers/video/imxfb.c
@@ -175,6 +175,7 @@ struct imxfb_info {
struct imx_fb_videomode *mode;
int num_modes;
+ struct backlight_device *bl;
void (*lcd_power)(int);
void (*backlight_power)(int);
@@ -449,6 +450,73 @@ static int imxfb_set_par(struct fb_info *info)
return 0;
}
+
+
+static int imxfb_bl_get_brightness(struct backlight_device *bl)
+{
+ struct imxfb_info *fbi = bl_get_data(bl);
+
+ return readl(fbi->regs + LCDC_PWMR) & 0xFF;
+}
+
+static int imxfb_bl_update_status(struct backlight_device *bl)
+{
+ struct imxfb_info *fbi = bl_get_data(bl);
+ int brightness = bl->props.brightness;
+
+ if (bl->props.power != FB_BLANK_UNBLANK)
+ brightness = 0;
+ if (bl->props.fb_blank != FB_BLANK_UNBLANK)
+ brightness = 0;
+
+ fbi->pwmr = (fbi->pwmr & ~0xFF) | brightness;
+
+ if (bl->props.fb_blank != FB_BLANK_UNBLANK)
+ clk_enable(fbi->clk);
+ writel(fbi->pwmr, fbi->regs + LCDC_PWMR);
+ if (bl->props.fb_blank != FB_BLANK_UNBLANK)
+ clk_disable(fbi->clk);
+
+ return 0;
+}
+
+static const struct backlight_ops imxfb_lcdc_bl_ops = {
+ .update_status = imxfb_bl_update_status,
+ .get_brightness = imxfb_bl_get_brightness,
+};
+
+static void imxfb_init_backlight(struct imxfb_info *fbi)
+{
+ struct backlight_properties props;
+ struct backlight_device *bl;
+
+ if (fbi->bl)
+ return;
+
+ memset(&props, 0, sizeof(struct backlight_properties));
+ props.max_brightness = 0xff;
+ writel(fbi->pwmr, fbi->regs + LCDC_PWMR);
+
+ bl = backlight_device_register("imxfb-bl", &fbi->pdev->dev, fbi,
+ &imxfb_lcdc_bl_ops, &props);
+ if (IS_ERR(bl)) {
+ dev_err(&fbi->pdev->dev, "error %ld on backlight register\n",
+ PTR_ERR(bl));
+ return;
+ }
+
+ fbi->bl = bl;
+ bl->props.power = FB_BLANK_UNBLANK;
+ bl->props.fb_blank = FB_BLANK_UNBLANK;
+ bl->props.brightness = imxfb_bl_get_brightness(bl);
+}
+
+static void imxfb_exit_backlight(struct imxfb_info *fbi)
+{
+ if (fbi->bl)
+ backlight_device_unregister(fbi->bl);
+}
+
static void imxfb_enable_controller(struct imxfb_info *fbi)
{
pr_debug("Enabling LCD controller\n");
@@ -579,7 +647,6 @@ static int imxfb_activate_var(struct fb_var_screeninfo *var, struct fb_info *inf
fbi->regs + LCDC_SIZE);
writel(fbi->pcr, fbi->regs + LCDC_PCR);
- writel(fbi->pwmr, fbi->regs + LCDC_PWMR);
writel(fbi->lscr1, fbi->regs + LCDC_LSCR1);
writel(fbi->dmacr, fbi->regs + LCDC_DMACR);
@@ -779,6 +846,8 @@ static int __init imxfb_probe(struct platform_device *pdev)
}
imxfb_enable_controller(fbi);
+ fbi->pdev = pdev;
+ imxfb_init_backlight(fbi);
return 0;
@@ -816,6 +885,7 @@ static int __devexit imxfb_remove(struct platform_device *pdev)
imxfb_disable_controller(fbi);
+ imxfb_exit_backlight(fbi);
unregister_framebuffer(info);
pdata = pdev->dev.platform_data;
diff --git a/drivers/video/omap2/vram.c b/drivers/video/omap2/vram.c
index 3b1237ad85e..f6fdc2085f3 100644
--- a/drivers/video/omap2/vram.c
+++ b/drivers/video/omap2/vram.c
@@ -25,7 +25,7 @@
#include <linux/list.h>
#include <linux/slab.h>
#include <linux/seq_file.h>
-#include <linux/bootmem.h>
+#include <linux/memblock.h>
#include <linux/completion.h>
#include <linux/debugfs.h>
#include <linux/jiffies.h>
@@ -525,10 +525,8 @@ early_param("vram", omap_vram_early_vram);
* Called from map_io. We need to call to this early enough so that we
* can reserve the fixed SDRAM regions before VM could get hold of them.
*/
-void __init omap_vram_reserve_sdram(void)
+void __init omap_vram_reserve_sdram_memblock(void)
{
- struct bootmem_data *bdata;
- unsigned long sdram_start, sdram_size;
u32 paddr;
u32 size = 0;
@@ -555,29 +553,28 @@ void __init omap_vram_reserve_sdram(void)
size = PAGE_ALIGN(size);
- bdata = NODE_DATA(0)->bdata;
- sdram_start = bdata->node_min_pfn << PAGE_SHIFT;
- sdram_size = (bdata->node_low_pfn << PAGE_SHIFT) - sdram_start;
-
if (paddr) {
- if ((paddr & ~PAGE_MASK) || paddr < sdram_start ||
- paddr + size > sdram_start + sdram_size) {
+ struct memblock_property res;
+
+ res.base = paddr;
+ res.size = size;
+ if ((paddr & ~PAGE_MASK) || memblock_find(&res) ||
+ res.base != paddr || res.size != size) {
pr_err("Illegal SDRAM region for VRAM\n");
return;
}
- if (reserve_bootmem(paddr, size, BOOTMEM_EXCLUSIVE) < 0) {
- pr_err("FB: failed to reserve VRAM\n");
+ if (memblock_is_region_reserved(paddr, size)) {
+ pr_err("FB: failed to reserve VRAM - busy\n");
return;
}
- } else {
- if (size > sdram_size) {
- pr_err("Illegal SDRAM size for VRAM\n");
+
+ if (memblock_reserve(paddr, size) < 0) {
+ pr_err("FB: failed to reserve VRAM - no memory\n");
return;
}
-
- paddr = virt_to_phys(alloc_bootmem_pages(size));
- BUG_ON(paddr & ~PAGE_MASK);
+ } else {
+ paddr = memblock_alloc_base(size, PAGE_SIZE, MEMBLOCK_REAL_LIMIT);
}
omap_vram_add_region(paddr, size);
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-17 23:16:49 +0000