diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/media/dvb/frontends/cx24123.c | 172 |
1 files changed, 108 insertions, 64 deletions
diff --git a/drivers/media/dvb/frontends/cx24123.c b/drivers/media/dvb/frontends/cx24123.c index fa6cdba08d2..2aac17451d7 100644 --- a/drivers/media/dvb/frontends/cx24123.c +++ b/drivers/media/dvb/frontends/cx24123.c @@ -76,23 +76,23 @@ static struct .symbolrate_high = 4999999, /* the specs recommend other values for VGA offsets, but tests show they are wrong */ - .VGAprogdata = (2 << 18) | (0x180 << 9) | 0x1e0, - .VCAprogdata = (4 << 18) | (0x07 << 9) | 0x07, - .FILTune = 0x280 /* 0.41 V */ + .VGAprogdata = (1 << 19) | (0x180 << 9) | 0x1e0, + .VCAprogdata = (2 << 19) | (0x07 << 9) | 0x07, + .FILTune = 0x27f /* 0.41 V */ }, { .symbolrate_low = 5000000, .symbolrate_high = 14999999, - .VGAprogdata = (2 << 18) | (0x180 << 9) | 0x1e0, - .VCAprogdata = (4 << 18) | (0x07 << 9) | 0x1f, + .VGAprogdata = (1 << 19) | (0x180 << 9) | 0x1e0, + .VCAprogdata = (2 << 19) | (0x07 << 9) | 0x1f, .FILTune = 0x317 /* 0.90 V */ }, { .symbolrate_low = 15000000, .symbolrate_high = 45000000, - .VGAprogdata = (2 << 18) | (0x100 << 9) | 0x180, - .VCAprogdata = (4 << 18) | (0x07 << 9) | 0x3f, - .FILTune = 0x146 /* 2.70 V */ + .VGAprogdata = (1 << 19) | (0x100 << 9) | 0x180, + .VCAprogdata = (2 << 19) | (0x07 << 9) | 0x3f, + .FILTune = 0x145 /* 2.70 V */ }, }; @@ -178,45 +178,44 @@ static struct { { {0x00, 0x03}, /* Reset system */ {0x00, 0x00}, /* Clear reset */ - {0x03, 0x07}, - {0x04, 0x10}, - {0x05, 0x04}, - {0x06, 0x31}, - {0x0d, 0x02}, - {0x0e, 0x03}, - {0x0f, 0xfe}, - {0x10, 0x01}, - {0x14, 0x01}, - {0x16, 0x00}, - {0x17, 0x01}, - {0x1b, 0x05}, - {0x1c, 0x80}, - {0x1d, 0x00}, - {0x1e, 0x00}, - {0x20, 0x41}, - {0x21, 0x15}, - {0x29, 0x00}, - {0x2a, 0xb0}, - {0x2b, 0x73}, - {0x2c, 0x00}, + {0x03, 0x07}, /* QPSK, DVB, Auto Acquisition (default) */ + {0x04, 0x10}, /* MPEG */ + {0x05, 0x04}, /* MPEG */ + {0x06, 0x31}, /* MPEG (default) */ + {0x0b, 0x00}, /* Freq search start point (default) */ + {0x0c, 0x00}, /* Demodulator sample gain (default) */ + {0x0d, 0x02}, /* Frequency search range = Fsymbol / 4 (default) */ + {0x0e, 0x03}, /* Default non-inverted, FEC 3/4 (default) */ + {0x0f, 0xfe}, /* FEC search mask (all supported codes) */ + {0x10, 0x01}, /* Default search inversion, no repeat (default) */ + {0x16, 0x00}, /* Enable reading of frequency */ + {0x17, 0x01}, /* Enable EsNO Ready Counter */ + {0x1c, 0x80}, /* Enable error counter */ + {0x20, 0x00}, /* Tuner burst clock rate = 500KHz */ + {0x21, 0x15}, /* Tuner burst mode, word length = 0x15 */ + {0x28, 0x00}, /* Enable FILTERV with positive pol., DiSEqC 2.x off */ + {0x29, 0x00}, /* DiSEqC LNB_DC off */ + {0x2a, 0xb0}, /* DiSEqC Parameters (default) */ + {0x2b, 0x73}, /* DiSEqC Tone Frequency (default) */ + {0x2c, 0x00}, /* DiSEqC Message (0x2c - 0x31) */ {0x2d, 0x00}, {0x2e, 0x00}, {0x2f, 0x00}, {0x30, 0x00}, {0x31, 0x00}, - {0x32, 0x8c}, - {0x33, 0x00}, + {0x32, 0x8c}, /* DiSEqC Parameters (default) */ + {0x33, 0x00}, /* Interrupts off (0x33 - 0x34) */ {0x34, 0x00}, - {0x35, 0x03}, - {0x36, 0x02}, - {0x37, 0x3a}, - {0x3a, 0x00}, /* Enable AGC accumulator */ - {0x44, 0x00}, - {0x45, 0x00}, - {0x46, 0x05}, - {0x56, 0x41}, - {0x57, 0xff}, - {0x67, 0x83}, + {0x35, 0x03}, /* DiSEqC Tone Amplitude (default) */ + {0x36, 0x02}, /* DiSEqC Parameters (default) */ + {0x37, 0x3a}, /* DiSEqC Parameters (default) */ + {0x3a, 0x00}, /* Enable AGC accumulator (for signal strength) */ + {0x44, 0x00}, /* Constellation (default) */ + {0x45, 0x00}, /* Symbol count (default) */ + {0x46, 0x0d}, /* Symbol rate estimator on (default) */ + {0x56, 0x41}, /* Various (default) */ + {0x57, 0xff}, /* Error Counter Window (default) */ + {0x67, 0x83}, /* Non-DCII symbol clock */ }; static int cx24123_writereg(struct cx24123_state* state, int reg, int data) @@ -291,20 +290,23 @@ static int cx24123_readlnbreg(struct cx24123_state* state, u8 reg) static int cx24123_set_inversion(struct cx24123_state* state, fe_spectral_inversion_t inversion) { + u8 nom_reg = cx24123_readreg(state, 0x0e); + u8 auto_reg = cx24123_readreg(state, 0x10); + switch (inversion) { case INVERSION_OFF: dprintk("%s: inversion off\n",__FUNCTION__); - cx24123_writereg(state, 0x0e, cx24123_readreg(state, 0x0e) & 0x7f); - cx24123_writereg(state, 0x10, cx24123_readreg(state, 0x10) | 0x80); + cx24123_writereg(state, 0x0e, nom_reg & ~0x80); + cx24123_writereg(state, 0x10, auto_reg | 0x80); break; case INVERSION_ON: dprintk("%s: inversion on\n",__FUNCTION__); - cx24123_writereg(state, 0x0e, cx24123_readreg(state, 0x0e) | 0x80); - cx24123_writereg(state, 0x10, cx24123_readreg(state, 0x10) | 0x80); + cx24123_writereg(state, 0x0e, nom_reg | 0x80); + cx24123_writereg(state, 0x10, auto_reg | 0x80); break; case INVERSION_AUTO: dprintk("%s: inversion auto\n",__FUNCTION__); - cx24123_writereg(state, 0x10, cx24123_readreg(state, 0x10) & 0x7f); + cx24123_writereg(state, 0x10, auto_reg & ~0x80); break; default: return -EINVAL; @@ -332,35 +334,56 @@ static int cx24123_get_inversion(struct cx24123_state* state, fe_spectral_invers static int cx24123_set_fec(struct cx24123_state* state, fe_code_rate_t fec) { + u8 nom_reg = cx24123_readreg(state, 0x0e) & ~0x07; + if ( (fec < FEC_NONE) || (fec > FEC_AUTO) ) fec = FEC_AUTO; - /* Hardware has 5/11 and 3/5 but are never unused */ switch (fec) { - case FEC_NONE: - dprintk("%s: set FEC to none\n",__FUNCTION__); - return cx24123_writereg(state, 0x0f, 0x01); case FEC_1_2: dprintk("%s: set FEC to 1/2\n",__FUNCTION__); - return cx24123_writereg(state, 0x0f, 0x02); + cx24123_writereg(state, 0x0e, nom_reg | 0x01); + cx24123_writereg(state, 0x0f, 0x02); + break; case FEC_2_3: dprintk("%s: set FEC to 2/3\n",__FUNCTION__); - return cx24123_writereg(state, 0x0f, 0x04); + cx24123_writereg(state, 0x0e, nom_reg | 0x02); + cx24123_writereg(state, 0x0f, 0x04); + break; case FEC_3_4: dprintk("%s: set FEC to 3/4\n",__FUNCTION__); - return cx24123_writereg(state, 0x0f, 0x08); - case FEC_5_6: + cx24123_writereg(state, 0x0e, nom_reg | 0x03); + cx24123_writereg(state, 0x0f, 0x08); + break; + case FEC_4_5: dprintk("%s: set FEC to 4/5\n",__FUNCTION__); - return cx24123_writereg(state, 0x0f, 0x20); - case FEC_7_8: + cx24123_writereg(state, 0x0e, nom_reg | 0x04); + cx24123_writereg(state, 0x0f, 0x10); + break; + case FEC_5_6: dprintk("%s: set FEC to 5/6\n",__FUNCTION__); - return cx24123_writereg(state, 0x0f, 0x80); + cx24123_writereg(state, 0x0e, nom_reg | 0x05); + cx24123_writereg(state, 0x0f, 0x20); + break; + case FEC_6_7: + dprintk("%s: set FEC to 6/7\n",__FUNCTION__); + cx24123_writereg(state, 0x0e, nom_reg | 0x06); + cx24123_writereg(state, 0x0f, 0x40); + break; + case FEC_7_8: + dprintk("%s: set FEC to 7/8\n",__FUNCTION__); + cx24123_writereg(state, 0x0e, nom_reg | 0x07); + cx24123_writereg(state, 0x0f, 0x80); + break; case FEC_AUTO: dprintk("%s: set FEC to auto\n",__FUNCTION__); - return cx24123_writereg(state, 0x0f, 0xae); + cx24123_writereg(state, 0x0f, 0xfe); + break; default: return -EOPNOTSUPP; } + + return 0; } static int cx24123_get_fec(struct cx24123_state* state, fe_code_rate_t *fec) @@ -395,16 +418,31 @@ static int cx24123_get_fec(struct cx24123_state* state, fe_code_rate_t *fec) *fec = FEC_7_8; break; default: - *fec = FEC_NONE; // can't happen - printk("FEC_NONE ?\n"); + /* this can happen when there's no lock */ + *fec = FEC_NONE; } return 0; } +/* Approximation of closest integer of log2(a/b). It actually gives the + lowest integer i such that 2^i >= round(a/b) */ +static u32 cx24123_int_log2(u32 a, u32 b) +{ + u32 exp, nearest = 0; + u32 div = a / b; + if(a % b >= b / 2) ++div; + if(div < (1 << 31)) + { + for(exp = 1; div > exp; nearest++) + exp += exp; + } + return nearest; +} + static int cx24123_set_symbolrate(struct cx24123_state* state, u32 srate) { - u32 tmp, sample_rate, ratio; + u32 tmp, sample_rate, ratio, sample_gain; u8 pll_mult; /* check if symbol rate is within limits */ @@ -462,7 +500,12 @@ static int cx24123_set_symbolrate(struct cx24123_state* state, u32 srate) cx24123_writereg(state, 0x09, (ratio >> 8) & 0xff ); cx24123_writereg(state, 0x0a, (ratio ) & 0xff ); - dprintk("%s: srate=%d, ratio=0x%08x, sample_rate=%i\n", __FUNCTION__, srate, ratio, sample_rate); + /* also set the demodulator sample gain */ + sample_gain = cx24123_int_log2(sample_rate, srate); + tmp = cx24123_readreg(state, 0x0c) & ~0xe0; + cx24123_writereg(state, 0x0c, tmp | sample_gain << 5); + + dprintk("%s: srate=%d, ratio=0x%08x, sample_rate=%i sample_gain=%d\n", __FUNCTION__, srate, ratio, sample_rate, sample_gain); return 0; } @@ -1014,12 +1057,13 @@ static struct dvb_frontend_ops cx24123_ops = { .frequency_min = 950000, .frequency_max = 2150000, .frequency_stepsize = 1011, /* kHz for QPSK frontends */ - .frequency_tolerance = 29500, + .frequency_tolerance = 5000, .symbol_rate_min = 1000000, .symbol_rate_max = 45000000, .caps = FE_CAN_INVERSION_AUTO | FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | - FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | + FE_CAN_FEC_4_5 | FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 | + FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | FE_CAN_QPSK | FE_CAN_RECOVER }, |