diff options
Diffstat (limited to 'drivers')
26 files changed, 263 insertions, 169 deletions
diff --git a/drivers/acpi/toshiba_acpi.c b/drivers/acpi/toshiba_acpi.c index 25f531d892d..40e60fc2e59 100644 --- a/drivers/acpi/toshiba_acpi.c +++ b/drivers/acpi/toshiba_acpi.c @@ -824,32 +824,36 @@ static int __init toshiba_acpi_init(void) toshiba_acpi_exit(); return -ENOMEM; } - } - /* Register input device for kill switch */ - toshiba_acpi.poll_dev = input_allocate_polled_device(); - if (!toshiba_acpi.poll_dev) { - printk(MY_ERR "unable to allocate kill-switch input device\n"); - toshiba_acpi_exit(); - return -ENOMEM; - } - toshiba_acpi.poll_dev->private = &toshiba_acpi; - toshiba_acpi.poll_dev->poll = bt_poll_rfkill; - toshiba_acpi.poll_dev->poll_interval = 1000; /* msecs */ - - toshiba_acpi.poll_dev->input->name = toshiba_acpi.rfk_name; - toshiba_acpi.poll_dev->input->id.bustype = BUS_HOST; - toshiba_acpi.poll_dev->input->id.vendor = 0x0930; /* Toshiba USB ID */ - set_bit(EV_SW, toshiba_acpi.poll_dev->input->evbit); - set_bit(SW_RFKILL_ALL, toshiba_acpi.poll_dev->input->swbit); - input_report_switch(toshiba_acpi.poll_dev->input, SW_RFKILL_ALL, TRUE); - input_sync(toshiba_acpi.poll_dev->input); - - ret = input_register_polled_device(toshiba_acpi.poll_dev); - if (ret) { - printk(MY_ERR "unable to register kill-switch input device\n"); - toshiba_acpi_exit(); - return ret; + /* Register input device for kill switch */ + toshiba_acpi.poll_dev = input_allocate_polled_device(); + if (!toshiba_acpi.poll_dev) { + printk(MY_ERR + "unable to allocate kill-switch input device\n"); + toshiba_acpi_exit(); + return -ENOMEM; + } + toshiba_acpi.poll_dev->private = &toshiba_acpi; + toshiba_acpi.poll_dev->poll = bt_poll_rfkill; + toshiba_acpi.poll_dev->poll_interval = 1000; /* msecs */ + + toshiba_acpi.poll_dev->input->name = toshiba_acpi.rfk_name; + toshiba_acpi.poll_dev->input->id.bustype = BUS_HOST; + /* Toshiba USB ID */ + toshiba_acpi.poll_dev->input->id.vendor = 0x0930; + set_bit(EV_SW, toshiba_acpi.poll_dev->input->evbit); + set_bit(SW_RFKILL_ALL, toshiba_acpi.poll_dev->input->swbit); + input_report_switch(toshiba_acpi.poll_dev->input, + SW_RFKILL_ALL, TRUE); + input_sync(toshiba_acpi.poll_dev->input); + + ret = input_register_polled_device(toshiba_acpi.poll_dev); + if (ret) { + printk(MY_ERR + "unable to register kill-switch input device\n"); + toshiba_acpi_exit(); + return ret; + } } return 0; diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 5e2eb740df4..bc6695e3c84 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -4050,17 +4050,70 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { { "ST3160023AS", "3.42", ATA_HORKAGE_NONCQ }, /* Seagate NCQ + FLUSH CACHE firmware bug */ - { "ST31500341AS", "9JU138", ATA_HORKAGE_NONCQ | + { "ST31500341AS", "SD15", ATA_HORKAGE_NONCQ | ATA_HORKAGE_FIRMWARE_WARN }, - { "ST31000333AS", "9FZ136", ATA_HORKAGE_NONCQ | + { "ST31500341AS", "SD16", ATA_HORKAGE_NONCQ | ATA_HORKAGE_FIRMWARE_WARN }, - { "ST3640623AS", "9FZ164", ATA_HORKAGE_NONCQ | + { "ST31500341AS", "SD17", ATA_HORKAGE_NONCQ | ATA_HORKAGE_FIRMWARE_WARN }, - { "ST3640323AS", "9FZ134", ATA_HORKAGE_NONCQ | + { "ST31500341AS", "SD18", ATA_HORKAGE_NONCQ | ATA_HORKAGE_FIRMWARE_WARN }, - { "ST3320813AS", "9FZ182", ATA_HORKAGE_NONCQ | + { "ST31500341AS", "SD19", ATA_HORKAGE_NONCQ | ATA_HORKAGE_FIRMWARE_WARN }, - { "ST3320613AS", "9FZ162", ATA_HORKAGE_NONCQ | + + { "ST31000333AS", "SD15", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST31000333AS", "SD16", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST31000333AS", "SD17", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST31000333AS", "SD18", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST31000333AS", "SD19", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + + { "ST3640623AS", "SD15", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST3640623AS", "SD16", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST3640623AS", "SD17", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST3640623AS", "SD18", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST3640623AS", "SD19", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + + { "ST3640323AS", "SD15", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST3640323AS", "SD16", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST3640323AS", "SD17", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST3640323AS", "SD18", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST3640323AS", "SD19", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + + { "ST3320813AS", "SD15", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST3320813AS", "SD16", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST3320813AS", "SD17", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST3320813AS", "SD18", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST3320813AS", "SD19", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + + { "ST3320613AS", "SD15", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST3320613AS", "SD16", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST3320613AS", "SD17", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST3320613AS", "SD18", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST3320613AS", "SD19", ATA_HORKAGE_NONCQ | ATA_HORKAGE_FIRMWARE_WARN }, /* Blacklist entries taken from Silicon Image 3124/3132 diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c index a098ba8eaab..e0c4f05d7d5 100644 --- a/drivers/ata/pata_hpt366.c +++ b/drivers/ata/pata_hpt366.c @@ -183,7 +183,9 @@ static unsigned long hpt366_filter(struct ata_device *adev, unsigned long mask) mask &= ~(0xF8 << ATA_SHIFT_UDMA); if (hpt_dma_blacklisted(adev, "UDMA4", bad_ata66_4)) mask &= ~(0xF0 << ATA_SHIFT_UDMA); - } + } else if (adev->class == ATA_DEV_ATAPI) + mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA); + return ata_bmdma_mode_filter(adev, mask); } @@ -211,11 +213,15 @@ static u32 hpt36x_find_mode(struct ata_port *ap, int speed) static int hpt36x_cable_detect(struct ata_port *ap) { - u8 ata66; struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u8 ata66; + /* + * Each channel of pata_hpt366 occupies separate PCI function + * as the primary channel and bit1 indicates the cable type. + */ pci_read_config_byte(pdev, 0x5A, &ata66); - if (ata66 & (1 << ap->port_no)) + if (ata66 & 2) return ATA_CBL_PATA40; return ATA_CBL_PATA80; } diff --git a/drivers/char/xilinx_hwicap/buffer_icap.c b/drivers/char/xilinx_hwicap/buffer_icap.c index aa7f7962a9a..05d897764f0 100644 --- a/drivers/char/xilinx_hwicap/buffer_icap.c +++ b/drivers/char/xilinx_hwicap/buffer_icap.c @@ -21,9 +21,6 @@ * INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE. * - * Xilinx products are not intended for use in life support appliances, - * devices, or systems. Use in such applications is expressly prohibited. - * * (c) Copyright 2003-2008 Xilinx Inc. * All rights reserved. * diff --git a/drivers/char/xilinx_hwicap/buffer_icap.h b/drivers/char/xilinx_hwicap/buffer_icap.h index 8b0252bf06e..d4f419ee87a 100644 --- a/drivers/char/xilinx_hwicap/buffer_icap.h +++ b/drivers/char/xilinx_hwicap/buffer_icap.h @@ -21,9 +21,6 @@ * INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE. * - * Xilinx products are not intended for use in life support appliances, - * devices, or systems. Use in such applications is expressly prohibited. - * * (c) Copyright 2003-2008 Xilinx Inc. * All rights reserved. * diff --git a/drivers/char/xilinx_hwicap/fifo_icap.c b/drivers/char/xilinx_hwicap/fifo_icap.c index 776b5052847..02225eb19cf 100644 --- a/drivers/char/xilinx_hwicap/fifo_icap.c +++ b/drivers/char/xilinx_hwicap/fifo_icap.c @@ -21,9 +21,6 @@ * INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE. * - * Xilinx products are not intended for use in life support appliances, - * devices, or systems. Use in such applications is expressly prohibited. - * * (c) Copyright 2007-2008 Xilinx Inc. * All rights reserved. * diff --git a/drivers/char/xilinx_hwicap/fifo_icap.h b/drivers/char/xilinx_hwicap/fifo_icap.h index 62bda453c90..4c9dd9a3b62 100644 --- a/drivers/char/xilinx_hwicap/fifo_icap.h +++ b/drivers/char/xilinx_hwicap/fifo_icap.h @@ -21,9 +21,6 @@ * INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE. * - * Xilinx products are not intended for use in life support appliances, - * devices, or systems. Use in such applications is expressly prohibited. - * * (c) Copyright 2007-2008 Xilinx Inc. * All rights reserved. * diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.c b/drivers/char/xilinx_hwicap/xilinx_hwicap.c index d1613194909..f40ab699860 100644 --- a/drivers/char/xilinx_hwicap/xilinx_hwicap.c +++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.c @@ -21,9 +21,6 @@ * INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE. * - * Xilinx products are not intended for use in life support appliances, - * devices, or systems. Use in such applications is expressly prohibited. - * * (c) Copyright 2002 Xilinx Inc., Systems Engineering Group * (c) Copyright 2004 Xilinx Inc., Systems Engineering Group * (c) Copyright 2007-2008 Xilinx Inc. diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.h b/drivers/char/xilinx_hwicap/xilinx_hwicap.h index 24d0d9b938f..8cca11981c5 100644 --- a/drivers/char/xilinx_hwicap/xilinx_hwicap.h +++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.h @@ -21,9 +21,6 @@ * INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE. * - * Xilinx products are not intended for use in life support appliances, - * devices, or systems. Use in such applications is expressly prohibited. - * * (c) Copyright 2003-2007 Xilinx Inc. * All rights reserved. * diff --git a/drivers/i2c/busses/i2c-cpm.c b/drivers/i2c/busses/i2c-cpm.c index 228f7572306..3fcf78e906d 100644 --- a/drivers/i2c/busses/i2c-cpm.c +++ b/drivers/i2c/busses/i2c-cpm.c @@ -365,6 +365,7 @@ static int cpm_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) pmsg = &msgs[tptr]; if (pmsg->flags & I2C_M_RD) ret = wait_event_interruptible_timeout(cpm->i2c_wait, + (in_be16(&tbdf[tptr].cbd_sc) & BD_SC_NAK) || !(in_be16(&rbdf[rptr].cbd_sc) & BD_SC_EMPTY), 1 * HZ); else diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index 1fac4e23313..b7434d24904 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -56,6 +56,7 @@ enum s3c24xx_i2c_state { struct s3c24xx_i2c { spinlock_t lock; wait_queue_head_t wait; + unsigned int suspended:1; struct i2c_msg *msg; unsigned int msg_num; @@ -507,7 +508,7 @@ static int s3c24xx_i2c_doxfer(struct s3c24xx_i2c *i2c, struct i2c_msg *msgs, int unsigned long timeout; int ret; - if (!(readl(i2c->regs + S3C2410_IICCON) & S3C2410_IICCON_IRQEN)) + if (i2c->suspended) return -EIO; ret = s3c24xx_i2c_set_master(i2c); @@ -986,17 +987,26 @@ static int s3c24xx_i2c_remove(struct platform_device *pdev) } #ifdef CONFIG_PM +static int s3c24xx_i2c_suspend_late(struct platform_device *dev, + pm_message_t msg) +{ + struct s3c24xx_i2c *i2c = platform_get_drvdata(dev); + i2c->suspended = 1; + return 0; +} + static int s3c24xx_i2c_resume(struct platform_device *dev) { struct s3c24xx_i2c *i2c = platform_get_drvdata(dev); - if (i2c != NULL) - s3c24xx_i2c_init(i2c); + i2c->suspended = 0; + s3c24xx_i2c_init(i2c); return 0; } #else +#define s3c24xx_i2c_suspend_late NULL #define s3c24xx_i2c_resume NULL #endif @@ -1005,6 +1015,7 @@ static int s3c24xx_i2c_resume(struct platform_device *dev) static struct platform_driver s3c2410_i2c_driver = { .probe = s3c24xx_i2c_probe, .remove = s3c24xx_i2c_remove, + .suspend_late = s3c24xx_i2c_suspend_late, .resume = s3c24xx_i2c_resume, .driver = { .owner = THIS_MODULE, @@ -1015,6 +1026,7 @@ static struct platform_driver s3c2410_i2c_driver = { static struct platform_driver s3c2440_i2c_driver = { .probe = s3c24xx_i2c_probe, .remove = s3c24xx_i2c_remove, + .suspend_late = s3c24xx_i2c_suspend_late, .resume = s3c24xx_i2c_resume, .driver = { .owner = THIS_MODULE, diff --git a/drivers/ieee1394/nodemgr.c b/drivers/ieee1394/nodemgr.c index d333ae22459..79ef5fd928a 100644 --- a/drivers/ieee1394/nodemgr.c +++ b/drivers/ieee1394/nodemgr.c @@ -115,8 +115,14 @@ static int nodemgr_bus_read(struct csr1212_csr *csr, u64 addr, u16 length, return error; } +#define OUI_FREECOM_TECHNOLOGIES_GMBH 0x0001db + static int nodemgr_get_max_rom(quadlet_t *bus_info_data, void *__ci) { + /* Freecom FireWire Hard Drive firmware bug */ + if (be32_to_cpu(bus_info_data[3]) >> 8 == OUI_FREECOM_TECHNOLOGIES_GMBH) + return 0; + return (be32_to_cpu(bus_info_data[2]) >> 8) & 0x3; } diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index 523b9716a54..d115a6d30f2 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -1893,12 +1893,17 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw) ctrl |= E1000_CTRL_PHY_RST; } ret_val = e1000_acquire_swflag_ich8lan(hw); + /* Whether or not the swflag was acquired, we need to reset the part */ hw_dbg(hw, "Issuing a global reset to ich8lan"); ew32(CTRL, (ctrl | E1000_CTRL_RST)); msleep(20); - /* release the swflag because it is not reset by hardware reset */ - e1000_release_swflag_ich8lan(hw); + if (!ret_val) { + /* release the swflag because it is not reset by + * hardware reset + */ + e1000_release_swflag_ich8lan(hw); + } ret_val = e1000e_get_auto_rd_done(hw); if (ret_val) { diff --git a/drivers/net/sungem.c b/drivers/net/sungem.c index 1349e419673..fed7eba65ea 100644 --- a/drivers/net/sungem.c +++ b/drivers/net/sungem.c @@ -1142,6 +1142,70 @@ static int gem_start_xmit(struct sk_buff *skb, struct net_device *dev) return NETDEV_TX_OK; } +static void gem_pcs_reset(struct gem *gp) +{ + int limit; + u32 val; + + /* Reset PCS unit. */ + val = readl(gp->regs + PCS_MIICTRL); + val |= PCS_MIICTRL_RST; + writel(val, gp->regs + PCS_MIICTRL); + + limit = 32; + while (readl(gp->regs + PCS_MIICTRL) & PCS_MIICTRL_RST) { + udelay(100); + if (limit-- <= 0) + break; + } + if (limit <= 0) + printk(KERN_WARNING "%s: PCS reset bit would not clear.\n", + gp->dev->name); +} + +static void gem_pcs_reinit_adv(struct gem *gp) +{ + u32 val; + + /* Make sure PCS is disabled while changing advertisement + * configuration. + */ + val = readl(gp->regs + PCS_CFG); + val &= ~(PCS_CFG_ENABLE | PCS_CFG_TO); + writel(val, gp->regs + PCS_CFG); + + /* Advertise all capabilities except assymetric + * pause. + */ + val = readl(gp->regs + PCS_MIIADV); + val |= (PCS_MIIADV_FD | PCS_MIIADV_HD | + PCS_MIIADV_SP | PCS_MIIADV_AP); + writel(val, gp->regs + PCS_MIIADV); + + /* Enable and restart auto-negotiation, disable wrapback/loopback, + * and re-enable PCS. + */ + val = readl(gp->regs + PCS_MIICTRL); + val |= (PCS_MIICTRL_RAN | PCS_MIICTRL_ANE); + val &= ~PCS_MIICTRL_WB; + writel(val, gp->regs + PCS_MIICTRL); + + val = readl(gp->regs + PCS_CFG); + val |= PCS_CFG_ENABLE; + writel(val, gp->regs + PCS_CFG); + + /* Make sure serialink loopback is off. The meaning + * of this bit is logically inverted based upon whether + * you are in Serialink or SERDES mode. + */ + val = readl(gp->regs + PCS_SCTRL); + if (gp->phy_type == phy_serialink) + val &= ~PCS_SCTRL_LOOP; + else + val |= PCS_SCTRL_LOOP; + writel(val, gp->regs + PCS_SCTRL); +} + #define STOP_TRIES 32 /* Must be invoked under gp->lock and gp->tx_lock. */ @@ -1168,6 +1232,9 @@ static void gem_reset(struct gem *gp) if (limit <= 0) printk(KERN_ERR "%s: SW reset is ghetto.\n", gp->dev->name); + + if (gp->phy_type == phy_serialink || gp->phy_type == phy_serdes) + gem_pcs_reinit_adv(gp); } /* Must be invoked under gp->lock and gp->tx_lock. */ @@ -1324,7 +1391,7 @@ static int gem_set_link_modes(struct gem *gp) gp->phy_type == phy_serdes) { u32 pcs_lpa = readl(gp->regs + PCS_MIILP); - if (pcs_lpa & PCS_MIIADV_FD) + if ((pcs_lpa & PCS_MIIADV_FD) || gp->phy_type == phy_serdes) full_duplex = 1; speed = SPEED_1000; } @@ -1488,6 +1555,9 @@ static void gem_link_timer(unsigned long data) val = readl(gp->regs + PCS_MIISTAT); if ((val & PCS_MIISTAT_LS) != 0) { + if (gp->lstate == link_up) + goto restart; + gp->lstate = link_up; netif_carrier_on(gp->dev); (void)gem_set_link_modes(gp); @@ -1708,61 +1778,8 @@ static void gem_init_phy(struct gem *gp) if (gp->phy_mii.def && gp->phy_mii.def->ops->init) gp->phy_mii.def->ops->init(&gp->phy_mii); } else { - u32 val; - int limit; - - /* Reset PCS unit. */ - val = readl(gp->regs + PCS_MIICTRL); - val |= PCS_MIICTRL_RST; - writel(val, gp->regs + PCS_MIICTRL); - - limit = 32; - while (readl(gp->regs + PCS_MIICTRL) & PCS_MIICTRL_RST) { - udelay(100); - if (limit-- <= 0) - break; - } - if (limit <= 0) - printk(KERN_WARNING "%s: PCS reset bit would not clear.\n", - gp->dev->name); - - /* Make sure PCS is disabled while changing advertisement - * configuration. - */ - val = readl(gp->regs + PCS_CFG); - val &= ~(PCS_CFG_ENABLE | PCS_CFG_TO); - writel(val, gp->regs + PCS_CFG); - - /* Advertise all capabilities except assymetric - * pause. - */ - val = readl(gp->regs + PCS_MIIADV); - val |= (PCS_MIIADV_FD | PCS_MIIADV_HD | - PCS_MIIADV_SP | PCS_MIIADV_AP); - writel(val, gp->regs + PCS_MIIADV); - - /* Enable and restart auto-negotiation, disable wrapback/loopback, - * and re-enable PCS. - */ - val = readl(gp->regs + PCS_MIICTRL); - val |= (PCS_MIICTRL_RAN | PCS_MIICTRL_ANE); - val &= ~PCS_MIICTRL_WB; - writel(val, gp->regs + PCS_MIICTRL); - - val = readl(gp->regs + PCS_CFG); - val |= PCS_CFG_ENABLE; - writel(val, gp->regs + PCS_CFG); - - /* Make sure serialink loopback is off. The meaning - * of this bit is logically inverted based upon whether - * you are in Serialink or SERDES mode. - */ - val = readl(gp->regs + PCS_SCTRL); - if (gp->phy_type == phy_serialink) - val &= ~PCS_SCTRL_LOOP; - else - val |= PCS_SCTRL_LOOP; - writel(val, gp->regs + PCS_SCTRL); + gem_pcs_reset(gp); + gem_pcs_reinit_adv(gp); } /* Default aneg parameters */ @@ -2680,6 +2697,21 @@ static int gem_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) cmd->speed = 0; cmd->duplex = cmd->port = cmd->phy_address = cmd->transceiver = cmd->autoneg = 0; + + /* serdes means usually a Fibre connector, with most fixed */ + if (gp->phy_type == phy_serdes) { + cmd->port = PORT_FIBRE; + cmd->supported = (SUPPORTED_1000baseT_Half | + SUPPORTED_1000baseT_Full | + SUPPORTED_FIBRE | SUPPORTED_Autoneg | + SUPPORTED_Pause | SUPPORTED_Asym_Pause); + cmd->advertising = cmd->supported; + cmd->transceiver = XCVR_INTERNAL; + if (gp->lstate == link_up) + cmd->speed = SPEED_1000; + cmd->duplex = DUPLEX_FULL; + cmd->autoneg = 1; + } } cmd->maxtxpkt = cmd->maxrxpkt = 0; diff --git a/drivers/pcmcia/bfin_cf_pcmcia.c b/drivers/pcmcia/bfin_cf_pcmcia.c index bb7338863fb..b59d4115d20 100644 --- a/drivers/pcmcia/bfin_cf_pcmcia.c +++ b/drivers/pcmcia/bfin_cf_pcmcia.c @@ -334,6 +334,6 @@ static void __exit bfin_cf_exit(void) module_init(bfin_cf_init); module_exit(bfin_cf_exit); -MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>") +MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>"); MODULE_DESCRIPTION("BFIN CF/PCMCIA Driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/sh/maple/maple.c b/drivers/sh/maple/maple.c index d1812d32f47..63f0de29aa1 100644 --- a/drivers/sh/maple/maple.c +++ b/drivers/sh/maple/maple.c @@ -827,7 +827,7 @@ static int __init maple_bus_init(void) maple_queue_cache = kmem_cache_create("maple_queue_cache", 0x400, 0, - SLAB_POISON|SLAB_HWCACHE_ALIGN, NULL); + SLAB_HWCACHE_ALIGN, NULL); if (!maple_queue_cache) goto cleanup_bothirqs; diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig index c95b286a123..5d457c96bd7 100644 --- a/drivers/staging/Kconfig +++ b/drivers/staging/Kconfig @@ -22,6 +22,8 @@ menuconfig STAGING If in doubt, say N here. +if STAGING + config STAGING_EXCLUDE_BUILD bool "Exclude Staging drivers from being built" if STAGING default y @@ -62,3 +64,4 @@ source "drivers/staging/at76_usb/Kconfig" source "drivers/staging/poch/Kconfig" endif # !STAGING_EXCLUDE_BUILD +endif # STAGING diff --git a/drivers/usb/class/usbtmc.c b/drivers/usb/class/usbtmc.c index 8e74657f106..43a863c5cc4 100644 --- a/drivers/usb/class/usbtmc.c +++ b/drivers/usb/class/usbtmc.c @@ -51,6 +51,7 @@ static struct usb_device_id usbtmc_devices[] = { { USB_INTERFACE_INFO(USB_CLASS_APP_SPEC, 3, 0), }, { 0, } /* terminating entry */ }; +MODULE_DEVICE_TABLE(usb, usbtmc_devices); /* * This structure is the capabilities for the device diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index 3d7793d9303..8c081308b0e 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -279,7 +279,9 @@ static int usb_unbind_interface(struct device *dev) * altsetting means creating new endpoint device entries). * When either of these happens, defer the Set-Interface. */ - if (!error && intf->dev.power.status == DPM_ON) + if (intf->cur_altsetting->desc.bAlternateSetting == 0) + ; /* Already in altsetting 0 so skip Set-Interface */ + else if (!error && intf->dev.power.status == DPM_ON) usb_set_interface(udev, intf->altsetting[0]. desc.bInterfaceNumber, 0); else diff --git a/drivers/usb/gadget/f_rndis.c b/drivers/usb/gadget/f_rndis.c index 428b5993575..3a8bb53fc47 100644 --- a/drivers/usb/gadget/f_rndis.c +++ b/drivers/usb/gadget/f_rndis.c @@ -651,6 +651,8 @@ rndis_bind(struct usb_configuration *c, struct usb_function *f) fs_in_desc.bEndpointAddress; hs_out_desc.bEndpointAddress = fs_out_desc.bEndpointAddress; + hs_notify_desc.bEndpointAddress = + fs_notify_desc.bEndpointAddress; /* copy descriptors, and track endpoint copies */ f->hs_descriptors = usb_copy_descriptors(eth_hs_function); @@ -662,6 +664,8 @@ rndis_bind(struct usb_configuration *c, struct usb_function *f) f->hs_descriptors, &hs_in_desc); rndis->hs.out = usb_find_endpoint(eth_hs_function, f->hs_descriptors, &hs_out_desc); + rndis->hs.notify = usb_find_endpoint(eth_hs_function, + f->hs_descriptors, &hs_notify_desc); } rndis->port.open = rndis_open; diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index aad1359a3eb..fb6f2933b01 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -143,6 +143,7 @@ static struct ftdi_sio_quirk ftdi_HE_TIRA1_quirk = { static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_AMC232_PID) }, { USB_DEVICE(FTDI_VID, FTDI_CANUSB_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_CANDAPTER_PID) }, { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_0_PID) }, { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_1_PID) }, { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_2_PID) }, @@ -166,6 +167,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_PID) }, { USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_IOBOARD_PID) }, { USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_MINI_IOBOARD_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_SPROG_II) }, { USB_DEVICE(FTDI_VID, FTDI_XF_632_PID) }, { USB_DEVICE(FTDI_VID, FTDI_XF_634_PID) }, { USB_DEVICE(FTDI_VID, FTDI_XF_547_PID) }, diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index 07a3992abad..373ee09975b 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -40,6 +40,9 @@ /* AlphaMicro Components AMC-232USB01 device */ #define FTDI_AMC232_PID 0xFF00 /* Product Id */ +/* www.candapter.com Ewert Energy Systems CANdapter device */ +#define FTDI_CANDAPTER_PID 0x9F80 /* Product Id */ + /* SCS HF Radio Modems PID's (http://www.scs-ptc.com) */ /* the VID is the standard ftdi vid (FTDI_VID) */ #define FTDI_SCS_DEVICE_0_PID 0xD010 /* SCS PTC-IIusb */ @@ -75,6 +78,9 @@ /* OpenDCC (www.opendcc.de) product id */ #define FTDI_OPENDCC_PID 0xBFD8 +/* Sprog II (Andrew Crosland's SprogII DCC interface) */ +#define FTDI_SPROG_II 0xF0C8 + /* www.crystalfontz.com devices - thanx for providing free devices for evaluation ! */ /* they use the ftdi chipset for the USB interface and the vendor id is the same */ #define FTDI_XF_632_PID 0xFC08 /* 632: 16x2 Character Display */ diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 491c8857b64..1aed584be5e 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -91,6 +91,8 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(WS002IN_VENDOR_ID, WS002IN_PRODUCT_ID) }, { USB_DEVICE(COREGA_VENDOR_ID, COREGA_PRODUCT_ID) }, { USB_DEVICE(YCCABLE_VENDOR_ID, YCCABLE_PRODUCT_ID) }, + { USB_DEVICE(SUPERIAL_VENDOR_ID, SUPERIAL_PRODUCT_ID) }, + { USB_DEVICE(HP_VENDOR_ID, HP_LD220_PRODUCT_ID) }, { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h index a3bd039c78e..54974f446a8 100644 --- a/drivers/usb/serial/pl2303.h +++ b/drivers/usb/serial/pl2303.h @@ -110,3 +110,11 @@ /* Y.C. Cable U.S.A., Inc - USB to RS-232 */ #define YCCABLE_VENDOR_ID 0x05ad #define YCCABLE_PRODUCT_ID 0x0fba + +/* "Superial" USB - Serial */ +#define SUPERIAL_VENDOR_ID 0x5372 +#define SUPERIAL_PRODUCT_ID 0x2303 + +/* Hewlett-Packard LD220-HP POS Pole Display */ +#define HP_VENDOR_ID 0x03f0 +#define HP_LD220_PRODUCT_ID 0x3524 diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index 31c42d1cae1..01d0c70d60e 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -16,56 +16,6 @@ * For questions or problems with this driver, contact Texas Instruments * technical support, or Al Borchers <alborchers@steinerpoint.com>, or * Peter Berger <pberger@brimson.com>. - * - * This driver needs this hotplug script in /etc/hotplug/usb/ti_usb_3410_5052 - * or in /etc/hotplug.d/usb/ti_usb_3410_5052.hotplug to set the device - * configuration. - * - * #!/bin/bash - * - * BOOT_CONFIG=1 - * ACTIVE_CONFIG=2 - * - * if [[ "$ACTION" != "add" ]] - * then - * exit - * fi - * - * CONFIG_PATH=/sys${DEVPATH%/?*}/bConfigurationValue - * - * if [[ 0`cat $CONFIG_PATH` -ne $BOOT_CONFIG ]] - * then - * exit - * fi - * - * PRODUCT=${PRODUCT%/?*} # delete version - * VENDOR_ID=`printf "%d" 0x${PRODUCT%/?*}` - * PRODUCT_ID=`printf "%d" 0x${PRODUCT#*?/}` - * - * PARAM_PATH=/sys/module/ti_usb_3410_5052/parameters - * - * function scan() { - * s=$1 - * shift - * for i - * do - * if [[ $s -eq $i ]] - * then - * return 0 - * fi - * done - * return 1 - * } - * - * IFS=$IFS, - * - * if (scan $VENDOR_ID 1105 `cat $PARAM_PATH/vendor_3410` && - * scan $PRODUCT_ID 13328 `cat $PARAM_PATH/product_3410`) || - * (scan $VENDOR_ID 1105 `cat $PARAM_PATH/vendor_5052` && - * scan $PRODUCT_ID 20562 20818 20570 20575 `cat $PARAM_PATH/product_5052`) - * then - * echo $ACTIVE_CONFIG > $CONFIG_PATH - * fi */ #include <linux/kernel.h> @@ -457,9 +407,10 @@ static int ti_startup(struct usb_serial *serial) goto free_tdev; } - /* the second configuration must be set (in sysfs by hotplug script) */ + /* the second configuration must be set */ if (dev->actconfig->desc.bConfigurationValue == TI_BOOT_CONFIG) { - status = -ENODEV; + status = usb_driver_set_configuration(dev, TI_ACTIVE_CONFIG); + status = status ? status : -ENODEV; goto free_tdev; } diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index e61f2bfc64a..bfcc1fe8251 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -167,8 +167,22 @@ UNUSUAL_DEV( 0x0421, 0x005d, 0x0001, 0x0600, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_CAPACITY ), +/* Reported by Ozan Sener <themgzzy@gmail.com> */ +UNUSUAL_DEV( 0x0421, 0x0060, 0x0551, 0x0551, + "Nokia", + "3500c", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY ), + +/* Reported by CSECSY Laszlo <boobaa@frugalware.org> */ +UNUSUAL_DEV( 0x0421, 0x0063, 0x0001, 0x0601, + "Nokia", + "Nokia 3109c", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY ), + /* Patch for Nokia 5310 capacity */ -UNUSUAL_DEV( 0x0421, 0x006a, 0x0000, 0x0591, +UNUSUAL_DEV( 0x0421, 0x006a, 0x0000, 0x0701, "Nokia", "5310", US_SC_DEVICE, US_PR_DEVICE, NULL, |