diff options
Diffstat (limited to 'drivers')
50 files changed, 731 insertions, 1796 deletions
diff --git a/drivers/ide/arm/bast-ide.c b/drivers/ide/arm/bast-ide.c index d158f579bde..713cef20622 100644 --- a/drivers/ide/arm/bast-ide.c +++ b/drivers/ide/arm/bast-ide.c @@ -35,12 +35,12 @@ static int __init bastide_register(unsigned int base, unsigned int aux, int irq) base += BAST_IDE_CS; aux += BAST_IDE_CS; - for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++) { - hw.io_ports[i] = (unsigned long)base; + for (i = 0; i <= 7; i++) { + hw.io_ports_array[i] = (unsigned long)base; base += 0x20; } - hw.io_ports[IDE_CONTROL_OFFSET] = aux + (6 * 0x20); + hw.io_ports.ctl_addr = aux + (6 * 0x20); hw.irq = irq; hwif = ide_find_port(); @@ -49,11 +49,7 @@ static int __init bastide_register(unsigned int base, unsigned int aux, int irq) i = hwif->index; - if (hwif->present) - ide_unregister(i); - else - ide_init_port_data(hwif, i); - + ide_init_port_data(hwif, i); ide_init_port_hw(hwif, &hw); hwif->port_ops = NULL; diff --git a/drivers/ide/arm/icside.c b/drivers/ide/arm/icside.c index 7d642f44e35..124445c2092 100644 --- a/drivers/ide/arm/icside.c +++ b/drivers/ide/arm/icside.c @@ -426,11 +426,12 @@ icside_setup(void __iomem *base, struct cardinfo *info, struct expansion_card *e */ default_hwif_mmiops(hwif); - for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++) { - hwif->io_ports[i] = port; + for (i = 0; i <= 7; i++) { + hwif->io_ports_array[i] = port; port += 1 << info->stepping; } - hwif->io_ports[IDE_CONTROL_OFFSET] = (unsigned long)base + info->ctrloffset; + hwif->io_ports.ctl_addr = + (unsigned long)base + info->ctrloffset; hwif->irq = ec->irq; hwif->chipset = ide_acorn; hwif->gendev.parent = &ec->dev; @@ -480,8 +481,7 @@ static const struct ide_port_info icside_v6_port_info __initdata = { .init_dma = icside_dma_off_init, .port_ops = &icside_v6_no_dma_port_ops, .dma_ops = &icside_v6_dma_ops, - .host_flags = IDE_HFLAG_SERIALIZE | - IDE_HFLAG_NO_AUTOTUNE, + .host_flags = IDE_HFLAG_SERIALIZE, .mwdma_mask = ATA_MWDMA2, .swdma_mask = ATA_SWDMA2, }; @@ -547,14 +547,13 @@ icside_register_v6(struct icside_state *state, struct expansion_card *ec) hwif->config_data = (unsigned long)ioc_base; hwif->select_data = sel; - mate->maskproc = icside_maskproc; mate->hwif_data = state; mate->config_data = (unsigned long)ioc_base; mate->select_data = sel | 1; if (ec->dma != NO_DMA && !request_dma(ec->dma, hwif->name)) { d.init_dma = icside_dma_init; - d.port_ops = &icside_v6_dma_port_ops; + d.port_ops = &icside_v6_port_ops; d.dma_ops = NULL; } diff --git a/drivers/ide/arm/palm_bk3710.c b/drivers/ide/arm/palm_bk3710.c index 8fa34e26443..aaf32541622 100644 --- a/drivers/ide/arm/palm_bk3710.c +++ b/drivers/ide/arm/palm_bk3710.c @@ -321,7 +321,7 @@ static int __devinit palm_bk3710_init_dma(ide_hwif_t *hwif, const struct ide_port_info *d) { unsigned long base = - hwif->io_ports[IDE_DATA_OFFSET] - IDE_PALM_ATA_PRI_REG_OFFSET; + hwif->io_ports.data_addr - IDE_PALM_ATA_PRI_REG_OFFSET; printk(KERN_INFO " %s: MMIO-DMA\n", hwif->name); @@ -386,8 +386,8 @@ static int __devinit palm_bk3710_probe(struct platform_device *pdev) pribase = mem->start + IDE_PALM_ATA_PRI_REG_OFFSET; for (i = 0; i < IDE_NR_PORTS - 2; i++) - hw.io_ports[i] = pribase + i; - hw.io_ports[IDE_CONTROL_OFFSET] = mem->start + + hw.io_ports_array[i] = pribase + i; + hw.io_ports.ctl_addr = mem->start + IDE_PALM_ATA_PRI_CTL_OFFSET; hw.irq = irq->start; hw.chipset = ide_palm3710; @@ -398,11 +398,7 @@ static int __devinit palm_bk3710_probe(struct platform_device *pdev) i = hwif->index; - if (hwif->present) - ide_unregister(i); - else - ide_init_port_data(hwif, i); - + ide_init_port_data(hwif, i); ide_init_port_hw(hwif, &hw); hwif->mmio = 1; diff --git a/drivers/ide/arm/rapide.c b/drivers/ide/arm/rapide.c index c0581bd98d0..babc1a5e128 100644 --- a/drivers/ide/arm/rapide.c +++ b/drivers/ide/arm/rapide.c @@ -17,11 +17,11 @@ static void rapide_setup_ports(hw_regs_t *hw, void __iomem *base, unsigned long port = (unsigned long)base; int i; - for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++) { - hw->io_ports[i] = port; + for (i = 0; i <= 7; i++) { + hw->io_ports_array[i] = port; port += sz; } - hw->io_ports[IDE_CONTROL_OFFSET] = (unsigned long)ctrl; + hw->io_ports.ctl_addr = (unsigned long)ctrl; hw->irq = irq; } @@ -75,7 +75,7 @@ static void __devexit rapide_remove(struct expansion_card *ec) ecard_set_drvdata(ec, NULL); - ide_unregister(hwif->index); + ide_unregister(hwif); ecard_release_resources(ec); } diff --git a/drivers/ide/cris/ide-cris.c b/drivers/ide/cris/ide-cris.c index a62ca75c7e2..9df26855bc0 100644 --- a/drivers/ide/cris/ide-cris.c +++ b/drivers/ide/cris/ide-cris.c @@ -88,8 +88,8 @@ enum /* Transfer types */ int cris_ide_ack_intr(ide_hwif_t* hwif) { - reg_ata_rw_ctrl2 ctrl2 = REG_TYPE_CONV(reg_ata_rw_ctrl2, - int, hwif->io_ports[0]); + reg_ata_rw_ctrl2 ctrl2 = REG_TYPE_CONV(reg_ata_rw_ctrl2, int, + hwif->io_ports.data_addr); REG_WR_INT(ata, regi_ata, rw_ack_intr, 1 << ctrl2.sel); return 1; } @@ -231,7 +231,7 @@ cris_ide_start_dma(ide_drive_t *drive, cris_dma_descr_type *d, int dir,int type, ide_hwif_t *hwif = drive->hwif; reg_ata_rw_ctrl2 ctrl2 = REG_TYPE_CONV(reg_ata_rw_ctrl2, int, - hwif->io_ports[IDE_DATA_OFFSET]); + hwif->io_ports.data_addr); reg_ata_rw_trf_cnt trf_cnt = {0}; mycontext.saved_data = (dma_descr_data*)virt_to_phys(d); @@ -271,7 +271,7 @@ static int cris_dma_test_irq(ide_drive_t *drive) int intr = REG_RD_INT(ata, regi_ata, r_intr); reg_ata_rw_ctrl2 ctrl2 = REG_TYPE_CONV(reg_ata_rw_ctrl2, int, - hwif->io_ports[IDE_DATA_OFFSET]); + hwif->io_ports.data_addr); return intr & (1 << ctrl2.sel) ? 1 : 0; } @@ -531,7 +531,7 @@ static void cris_ide_start_dma(ide_drive_t *drive, cris_dma_descr_type *d, int d *R_ATA_CTRL_DATA = cmd | IO_FIELD(R_ATA_CTRL_DATA, data, - drive->hwif->io_ports[IDE_DATA_OFFSET]) | + drive->hwif->io_ports.data_addr) | IO_STATE(R_ATA_CTRL_DATA, src_dst, dma) | IO_STATE(R_ATA_CTRL_DATA, multi, on) | IO_STATE(R_ATA_CTRL_DATA, dma_size, word); @@ -550,7 +550,7 @@ static int cris_dma_test_irq(ide_drive_t *drive) { int intr = *R_IRQ_MASK0_RD; int bus = IO_EXTRACT(R_ATA_CTRL_DATA, sel, - drive->hwif->io_ports[IDE_DATA_OFFSET]); + drive->hwif->io_ports.data_addr); return intr & (1 << (bus + IO_BITNR(R_IRQ_MASK0_RD, ata_irq0))) ? 1 : 0; } @@ -644,7 +644,7 @@ cris_ide_inw(unsigned long reg) { * call will also timeout on busy, but as long as the * write is still performed, everything will be fine. */ - if (cris_ide_get_reg(reg) == IDE_STATUS_OFFSET) + if (cris_ide_get_reg(reg) == 7) return BUSY_STAT; else /* For other rare cases we assume 0 is good enough. */ @@ -765,13 +765,13 @@ static void __init cris_setup_ports(hw_regs_t *hw, unsigned long base) memset(hw, 0, sizeof(*hw)); for (i = 0; i <= 7; i++) - hw->io_ports[i] = base + cris_ide_reg_addr(i, 0, 1); + hw->io_ports_array[i] = base + cris_ide_reg_addr(i, 0, 1); /* * the IDE control register is at ATA address 6, * with CS1 active instead of CS0 */ - hw->io_ports[IDE_CONTROL_OFFSET] = base + cris_ide_reg_addr(6, 1, 0); + hw->io_ports.ctl_addr = base + cris_ide_reg_addr(6, 1, 0); hw->irq = ide_default_irq(0); hw->ack_intr = cris_ide_ack_intr; diff --git a/drivers/ide/h8300/ide-h8300.c b/drivers/ide/h8300/ide-h8300.c index 0708b29cdb1..fd23f12e17a 100644 --- a/drivers/ide/h8300/ide-h8300.c +++ b/drivers/ide/h8300/ide-h8300.c @@ -63,9 +63,9 @@ static inline void hw_setup(hw_regs_t *hw) int i; memset(hw, 0, sizeof(hw_regs_t)); - for (i = 0; i <= IDE_STATUS_OFFSET; i++) - hw->io_ports[i] = CONFIG_H8300_IDE_BASE + H8300_IDE_GAP*i; - hw->io_ports[IDE_CONTROL_OFFSET] = CONFIG_H8300_IDE_ALT; + for (i = 0; i <= 7; i++) + hw->io_ports_array[i] = CONFIG_H8300_IDE_BASE + H8300_IDE_GAP*i; + hw->io_ports.ctl_addr = CONFIG_H8300_IDE_ALT; hw->irq = EXT_IRQ0 + CONFIG_H8300_IDE_IRQ; hw->chipset = ide_generic; } diff --git a/drivers/ide/ide-acpi.c b/drivers/ide/ide-acpi.c index e4ad26e4fce..9d3601fa568 100644 --- a/drivers/ide/ide-acpi.c +++ b/drivers/ide/ide-acpi.c @@ -60,9 +60,17 @@ struct ide_acpi_hwif_link { #define DEBPRINT(fmt, args...) do {} while (0) #endif /* DEBUGGING */ -extern int ide_noacpi; -extern int ide_noacpitfs; -extern int ide_noacpionboot; +int ide_noacpi; +module_param_named(noacpi, ide_noacpi, bool, 0); +MODULE_PARM_DESC(noacpi, "disable IDE ACPI support"); + +int ide_acpigtf; +module_param_named(acpigtf, ide_acpigtf, bool, 0); +MODULE_PARM_DESC(acpigtf, "enable IDE ACPI _GTF support"); + +int ide_acpionboot; +module_param_named(acpionboot, ide_acpionboot, bool, 0); +MODULE_PARM_DESC(acpionboot, "call IDE ACPI methods on boot"); static bool ide_noacpi_psx; static int no_acpi_psx(const struct dmi_system_id *id) @@ -376,7 +384,7 @@ static int taskfile_load_raw(ide_drive_t *drive, memcpy(&args.tf_array[7], >f->tfa, 7); args.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; - if (ide_noacpitfs) { + if (!ide_acpigtf) { DEBPRINT("_GTF execution disabled\n"); return err; } @@ -721,7 +729,7 @@ void ide_acpi_port_init_devices(ide_hwif_t *hwif) drive->name, err); } - if (ide_noacpionboot) { + if (!ide_acpionboot) { DEBPRINT("ACPI methods disabled on boot\n"); return; } diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index ad984322da9..b34fd2bde96 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -560,7 +560,7 @@ static ide_startstop_t cdrom_start_packet_command(ide_drive_t *drive, /* packet command */ spin_lock_irqsave(&ide_lock, flags); hwif->OUTBSYNC(drive, WIN_PACKETCMD, - hwif->io_ports[IDE_COMMAND_OFFSET]); + hwif->io_ports.command_addr); ndelay(400); spin_unlock_irqrestore(&ide_lock, flags); @@ -952,9 +952,9 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) } /* ok we fall to pio :/ */ - ireason = hwif->INB(hwif->io_ports[IDE_IREASON_OFFSET]) & 0x3; - lowcyl = hwif->INB(hwif->io_ports[IDE_BCOUNTL_OFFSET]); - highcyl = hwif->INB(hwif->io_ports[IDE_BCOUNTH_OFFSET]); + ireason = hwif->INB(hwif->io_ports.nsect_addr) & 0x3; + lowcyl = hwif->INB(hwif->io_ports.lbam_addr); + highcyl = hwif->INB(hwif->io_ports.lbah_addr); len = lowcyl + (256 * highcyl); @@ -1909,9 +1909,7 @@ static int ide_cdrom_setup(ide_drive_t *drive) /* set correct block size */ blk_queue_hardsect_size(drive->queue, CD_FRAMESIZE); - if (drive->autotune == IDE_TUNE_DEFAULT || - drive->autotune == IDE_TUNE_AUTO) - drive->dsc_overlap = (drive->next != drive); + drive->dsc_overlap = (drive->next != drive); if (ide_cdrom_register(drive, nslots)) { printk(KERN_ERR "%s: %s failed to register device with the" diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 6e891bccd05..489079b8ed0 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -465,10 +465,10 @@ static ide_startstop_t idefloppy_pc_intr(ide_drive_t *drive) } /* Get the number of bytes to transfer */ - bcount = (hwif->INB(hwif->io_ports[IDE_BCOUNTH_OFFSET]) << 8) | - hwif->INB(hwif->io_ports[IDE_BCOUNTL_OFFSET]); + bcount = (hwif->INB(hwif->io_ports.lbah_addr) << 8) | + hwif->INB(hwif->io_ports.lbam_addr); /* on this interrupt */ - ireason = hwif->INB(hwif->io_ports[IDE_IREASON_OFFSET]); + ireason = hwif->INB(hwif->io_ports.nsect_addr); if (ireason & CD) { printk(KERN_ERR "ide-floppy: CoD != 0 in %s\n", __func__); @@ -539,7 +539,7 @@ static ide_startstop_t idefloppy_transfer_pc(ide_drive_t *drive) "initiated yet DRQ isn't asserted\n"); return startstop; } - ireason = hwif->INB(hwif->io_ports[IDE_IREASON_OFFSET]); + ireason = hwif->INB(hwif->io_ports.nsect_addr); if ((ireason & CD) == 0 || (ireason & IO)) { printk(KERN_ERR "ide-floppy: (IO,CoD) != (0,1) while " "issuing a packet command\n"); @@ -586,7 +586,7 @@ static ide_startstop_t idefloppy_transfer_pc1(ide_drive_t *drive) "initiated yet DRQ isn't asserted\n"); return startstop; } - ireason = hwif->INB(hwif->io_ports[IDE_IREASON_OFFSET]); + ireason = hwif->INB(hwif->io_ports.nsect_addr); if ((ireason & CD) == 0 || (ireason & IO)) { printk(KERN_ERR "ide-floppy: (IO,CoD) != (0,1) " "while issuing a packet command\n"); @@ -692,7 +692,7 @@ static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive, return ide_started; } else { /* Issue the packet command */ - hwif->OUTB(WIN_PACKETCMD, hwif->io_ports[IDE_COMMAND_OFFSET]); + hwif->OUTB(WIN_PACKETCMD, hwif->io_ports.command_addr); return (*pkt_xfer_routine) (drive); } } diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 0fe89a59927..3a2d8930d17 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -298,48 +298,43 @@ static void ide_complete_pm_request (ide_drive_t *drive, struct request *rq) void ide_tf_read(ide_drive_t *drive, ide_task_t *task) { ide_hwif_t *hwif = drive->hwif; + struct ide_io_ports *io_ports = &hwif->io_ports; struct ide_taskfile *tf = &task->tf; if (task->tf_flags & IDE_TFLAG_IN_DATA) { - u16 data = hwif->INW(hwif->io_ports[IDE_DATA_OFFSET]); + u16 data = hwif->INW(io_ports->data_addr); tf->data = data & 0xff; tf->hob_data = (data >> 8) & 0xff; } /* be sure we're looking at the low order bits */ - hwif->OUTB(drive->ctl & ~0x80, hwif->io_ports[IDE_CONTROL_OFFSET]); + hwif->OUTB(drive->ctl & ~0x80, io_ports->ctl_addr); if (task->tf_flags & IDE_TFLAG_IN_NSECT) - tf->nsect = hwif->INB(hwif->io_ports[IDE_NSECTOR_OFFSET]); + tf->nsect = hwif->INB(io_ports->nsect_addr); if (task->tf_flags & IDE_TFLAG_IN_LBAL) - tf->lbal = hwif->INB(hwif->io_ports[IDE_SECTOR_OFFSET]); + tf->lbal = hwif->INB(io_ports->lbal_addr); if (task->tf_flags & IDE_TFLAG_IN_LBAM) - tf->lbam = hwif->INB(hwif->io_ports[IDE_LCYL_OFFSET]); + tf->lbam = hwif->INB(io_ports->lbam_addr); if (task->tf_flags & IDE_TFLAG_IN_LBAH) - tf->lbah = hwif->INB(hwif->io_ports[IDE_HCYL_OFFSET]); + tf->lbah = hwif->INB(io_ports->lbah_addr); if (task->tf_flags & IDE_TFLAG_IN_DEVICE) - tf->device = hwif->INB(hwif->io_ports[IDE_SELECT_OFFSET]); + tf->device = hwif->INB(io_ports->device_addr); if (task->tf_flags & IDE_TFLAG_LBA48) { - hwif->OUTB(drive->ctl | 0x80, - hwif->io_ports[IDE_CONTROL_OFFSET]); + hwif->OUTB(drive->ctl | 0x80, io_ports->ctl_addr); if (task->tf_flags & IDE_TFLAG_IN_HOB_FEATURE) - tf->hob_feature = - hwif->INB(hwif->io_ports[IDE_FEATURE_OFFSET]); + tf->hob_feature = hwif->INB(io_ports->feature_addr); if (task->tf_flags & IDE_TFLAG_IN_HOB_NSECT) - tf->hob_nsect = - hwif->INB(hwif->io_ports[IDE_NSECTOR_OFFSET]); + tf->hob_nsect = hwif->INB(io_ports->nsect_addr); if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAL) - tf->hob_lbal = - hwif->INB(hwif->io_ports[IDE_SECTOR_OFFSET]); + tf->hob_lbal = hwif->INB(io_ports->lbal_addr); if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAM) - tf->hob_lbam = - hwif->INB(hwif->io_ports[IDE_LCYL_OFFSET]); + tf->hob_lbam = hwif->INB(io_ports->lbam_addr); if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAH) - tf->hob_lbah = - hwif->INB(hwif->io_ports[IDE_HCYL_OFFSET]); + tf->hob_lbah = hwif->INB(io_ports->lbah_addr); } } @@ -454,7 +449,7 @@ static ide_startstop_t ide_ata_error(ide_drive_t *drive, struct request *rq, u8 if (err == ABRT_ERR) { if (drive->select.b.lba && /* some newer drives don't support WIN_SPECIFY */ - hwif->INB(hwif->io_ports[IDE_COMMAND_OFFSET]) == + hwif->INB(hwif->io_ports.command_addr) == WIN_SPECIFY) return ide_stopped; } else if ((err & BAD_CRC) == BAD_CRC) { @@ -507,8 +502,7 @@ static ide_startstop_t ide_atapi_error(ide_drive_t *drive, struct request *rq, u if (ide_read_status(drive) & (BUSY_STAT | DRQ_STAT)) /* force an abort */ - hwif->OUTB(WIN_IDLEIMMEDIATE, - hwif->io_ports[IDE_COMMAND_OFFSET]); + hwif->OUTB(WIN_IDLEIMMEDIATE, hwif->io_ports.command_addr); if (rq->errors >= ERROR_MAX) { ide_kill_rq(drive, rq); @@ -1421,7 +1415,7 @@ static void unexpected_intr (int irq, ide_hwgroup_t *hwgroup) */ do { if (hwif->irq == irq) { - stat = hwif->INB(hwif->io_ports[IDE_STATUS_OFFSET]); + stat = hwif->INB(hwif->io_ports.status_addr); if (!OK_STAT(stat, READY_STAT, BAD_STAT)) { /* Try to not flood the console with msgs */ static unsigned long last_msgtime, count; @@ -1511,7 +1505,7 @@ irqreturn_t ide_intr (int irq, void *dev_id) * Whack the status register, just in case * we have a leftover pending IRQ. */ - (void) hwif->INB(hwif->io_ports[IDE_STATUS_OFFSET]); + (void) hwif->INB(hwif->io_ports.status_addr); #endif /* CONFIG_BLK_DEV_IDEPCI */ } spin_unlock_irqrestore(&ide_lock, flags); diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index 9c646bd6354..5425d3038ec 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -164,7 +164,7 @@ void SELECT_DRIVE (ide_drive_t *drive) if (port_ops && port_ops->selectproc) port_ops->selectproc(drive); - hwif->OUTB(drive->select.all, hwif->io_ports[IDE_SELECT_OFFSET]); + hwif->OUTB(drive->select.all, hwif->io_ports.device_addr); } void SELECT_MASK (ide_drive_t *drive, int mask) @@ -194,24 +194,22 @@ static void ata_vlb_sync(ide_drive_t *drive, unsigned long port) */ static void ata_input_data(ide_drive_t *drive, void *buffer, u32 wcount) { - ide_hwif_t *hwif = HWIF(drive); - u8 io_32bit = drive->io_32bit; + ide_hwif_t *hwif = drive->hwif; + struct ide_io_ports *io_ports = &hwif->io_ports; + u8 io_32bit = drive->io_32bit; if (io_32bit) { if (io_32bit & 2) { unsigned long flags; local_irq_save(flags); - ata_vlb_sync(drive, hwif->io_ports[IDE_NSECTOR_OFFSET]); - hwif->INSL(hwif->io_ports[IDE_DATA_OFFSET], buffer, - wcount); + ata_vlb_sync(drive, io_ports->nsect_addr); + hwif->INSL(io_ports->data_addr, buffer, wcount); local_irq_restore(flags); } else - hwif->INSL(hwif->io_ports[IDE_DATA_OFFSET], buffer, - wcount); + hwif->INSL(io_ports->data_addr, buffer, wcount); } else - hwif->INSW(hwif->io_ports[IDE_DATA_OFFSET], buffer, - wcount << 1); + hwif->INSW(io_ports->data_addr, buffer, wcount << 1); } /* @@ -219,24 +217,22 @@ static void ata_input_data(ide_drive_t *drive, void *buffer, u32 wcount) */ static void ata_output_data(ide_drive_t *drive, void *buffer, u32 wcount) { - ide_hwif_t *hwif = HWIF(drive); - u8 io_32bit = drive->io_32bit; + ide_hwif_t *hwif = drive->hwif; + struct ide_io_ports *io_ports = &hwif->io_ports; + u8 io_32bit = drive->io_32bit; if (io_32bit) { if (io_32bit & 2) { unsigned long flags; local_irq_save(flags); - ata_vlb_sync(drive, hwif->io_ports[IDE_NSECTOR_OFFSET]); - hwif->OUTSL(hwif->io_ports[IDE_DATA_OFFSET], buffer, - wcount); + ata_vlb_sync(drive, io_ports->nsect_addr); + hwif->OUTSL(io_ports->data_addr, buffer, wcount); local_irq_restore(flags); } else - hwif->OUTSL(hwif->io_ports[IDE_DATA_OFFSET], buffer, - wcount); + hwif->OUTSL(io_ports->data_addr, buffer, wcount); } else - hwif->OUTSW(hwif->io_ports[IDE_DATA_OFFSET], buffer, - wcount << 1); + hwif->OUTSW(io_ports->data_addr, buffer, wcount << 1); } /* @@ -255,14 +251,13 @@ static void atapi_input_bytes(ide_drive_t *drive, void *buffer, u32 bytecount) #if defined(CONFIG_ATARI) || defined(CONFIG_Q40) if (MACH_IS_ATARI || MACH_IS_Q40) { /* Atari has a byte-swapped IDE interface */ - insw_swapw(hwif->io_ports[IDE_DATA_OFFSET], buffer, - bytecount / 2); + insw_swapw(hwif->io_ports.data_addr, buffer, bytecount / 2); return; } #endif /* CONFIG_ATARI || CONFIG_Q40 */ hwif->ata_input_data(drive, buffer, bytecount / 4); if ((bytecount & 0x03) >= 2) - hwif->INSW(hwif->io_ports[IDE_DATA_OFFSET], + hwif->INSW(hwif->io_ports.data_addr, (u8 *)buffer + (bytecount & ~0x03), 1); } @@ -274,14 +269,13 @@ static void atapi_output_bytes(ide_drive_t *drive, void *buffer, u32 bytecount) #if defined(CONFIG_ATARI) || defined(CONFIG_Q40) if (MACH_IS_ATARI || MACH_IS_Q40) { /* Atari has a byte-swapped IDE interface */ - outsw_swapw(hwif->io_ports[IDE_DATA_OFFSET], buffer, - bytecount / 2); + outsw_swapw(hwif->io_ports.data_addr, buffer, bytecount / 2); return; } #endif /* CONFIG_ATARI || CONFIG_Q40 */ hwif->ata_output_data(drive, buffer, bytecount / 4); if ((bytecount & 0x03) >= 2) - hwif->OUTSW(hwif->io_ports[IDE_DATA_OFFSET], + hwif->OUTSW(hwif->io_ports.data_addr, (u8 *)buffer + (bytecount & ~0x03), 1); } @@ -445,7 +439,7 @@ int drive_is_ready (ide_drive_t *drive) * an interrupt with another pci card/device. We make no assumptions * about possible isa-pnp and pci-pnp issues yet. */ - if (hwif->io_ports[IDE_CONTROL_OFFSET]) + if (hwif->io_ports.ctl_addr) stat = ide_read_altstatus(drive); else /* Note: this may clear a pending IRQ!! */ @@ -647,7 +641,7 @@ int ide_driveid_update(ide_drive_t *drive) SELECT_MASK(drive, 1); ide_set_irq(drive, 1); msleep(50); - hwif->OUTB(WIN_IDENTIFY, hwif->io_ports[IDE_COMMAND_OFFSET]); + hwif->OUTB(WIN_IDENTIFY, hwif->io_ports.command_addr); timeout = jiffies + WAIT_WORSTCASE; do { if (time_after(jiffies, timeout)) { @@ -696,6 +690,7 @@ int ide_driveid_update(ide_drive_t *drive) int ide_config_drive_speed(ide_drive_t *drive, u8 speed) { ide_hwif_t *hwif = drive->hwif; + struct ide_io_ports *io_ports = &hwif->io_ports; int error = 0; u8 stat; @@ -734,10 +729,9 @@ int ide_config_drive_speed(ide_drive_t *drive, u8 speed) SELECT_MASK(drive, 0); udelay(1); ide_set_irq(drive, 0); - hwif->OUTB(speed, hwif->io_ports[IDE_NSECTOR_OFFSET]); - hwif->OUTB(SETFEATURES_XFER, hwif->io_ports[IDE_FEATURE_OFFSET]); - hwif->OUTBSYNC(drive, WIN_SETFEATURES, - hwif->io_ports[IDE_COMMAND_OFFSET]); + hwif->OUTB(speed, io_ports->nsect_addr); + hwif->OUTB(SETFEATURES_XFER, io_ports->feature_addr); + hwif->OUTBSYNC(drive, WIN_SETFEATURES, io_ports->command_addr); if (drive->quirk_list == 2) ide_set_irq(drive, 1); @@ -845,7 +839,7 @@ void ide_execute_command(ide_drive_t *drive, u8 cmd, ide_handler_t *handler, spin_lock_irqsave(&ide_lock, flags); __ide_set_handler(drive, handler, timeout, expiry); - hwif->OUTBSYNC(drive, cmd, hwif->io_ports[IDE_COMMAND_OFFSET]); + hwif->OUTBSYNC(drive, cmd, hwif->io_ports.command_addr); /* * Drive takes 400nS to respond, we must avoid the IRQ being * serviced before that. @@ -1029,6 +1023,7 @@ static ide_startstop_t do_reset1 (ide_drive_t *drive, int do_not_try_atapi) unsigned long flags; ide_hwif_t *hwif; ide_hwgroup_t *hwgroup; + struct ide_io_ports *io_ports; const struct ide_port_ops *port_ops; u8 ctl; @@ -1036,6 +1031,8 @@ static ide_startstop_t do_reset1 (ide_drive_t *drive, int do_not_try_atapi) hwif = HWIF(drive); hwgroup = HWGROUP(drive); + io_ports = &hwif->io_ports; + /* We must not reset with running handlers */ BUG_ON(hwgroup->handler != NULL); @@ -1045,8 +1042,7 @@ static ide_startstop_t do_reset1 (ide_drive_t *drive, int do_not_try_atapi) pre_reset(drive); SELECT_DRIVE(drive); udelay (20); - hwif->OUTBSYNC(drive, WIN_SRST, - hwif->io_ports[IDE_COMMAND_OFFSET]); + hwif->OUTBSYNC(drive, WIN_SRST, io_ports->command_addr); ndelay(400); hwgroup->poll_timeout = jiffies + WAIT_WORSTCASE; hwgroup->polling = 1; @@ -1062,7 +1058,7 @@ static ide_startstop_t do_reset1 (ide_drive_t *drive, int do_not_try_atapi) for (unit = 0; unit < MAX_DRIVES; ++unit) pre_reset(&hwif->drives[unit]); - if (hwif->io_ports[IDE_CONTROL_OFFSET] == 0) { + if (io_ports->ctl_addr == 0) { spin_unlock_irqrestore(&ide_lock, flags); return ide_stopped; } @@ -1077,14 +1073,14 @@ static ide_startstop_t do_reset1 (ide_drive_t *drive, int do_not_try_atapi) * recover from reset very quickly, saving us the first 50ms wait time. */ /* set SRST and nIEN */ - hwif->OUTBSYNC(drive, drive->ctl|6, hwif->io_ports[IDE_CONTROL_OFFSET]); + hwif->OUTBSYNC(drive, drive->ctl|6, io_ports->ctl_addr); /* more than enough time */ udelay(10); if (drive->quirk_list == 2) ctl = drive->ctl; /* clear SRST and nIEN */ else ctl = drive->ctl | 2; /* clear SRST, leave nIEN */ - hwif->OUTBSYNC(drive, ctl, hwif->io_ports[IDE_CONTROL_OFFSET]); + hwif->OUTBSYNC(drive, ctl, io_ports->ctl_addr); /* more than enough time */ udelay(10); hwgroup->poll_timeout = jiffies + WAIT_WORSTCASE; @@ -1129,7 +1125,7 @@ int ide_wait_not_busy(ide_hwif_t *hwif, unsigned long timeout) * about locking issues (2.5 work ?). */ mdelay(1); - stat = hwif->INB(hwif->io_ports[IDE_STATUS_OFFSET]); + stat = hwif->INB(hwif->io_ports.status_addr); if ((stat & BUSY_STAT) == 0) return 0; /* diff --git a/drivers/ide/ide-pnp.c b/drivers/ide/ide-pnp.c index 10c20e9a578..6a8953f68e9 100644 --- a/drivers/ide/ide-pnp.c +++ b/drivers/ide/ide-pnp.c @@ -82,10 +82,7 @@ static void idepnp_remove(struct pnp_dev *dev) { ide_hwif_t *hwif = pnp_get_drvdata(dev); - if (hwif) - ide_unregister(hwif->index); - else - printk(KERN_ERR "idepnp: Unable to remove device, please report.\n"); + ide_unregister(hwif); release_region(pnp_port_start(dev, 1), 1); release_region(pnp_port_start(dev, 0), 8); diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index a4b65b321f5..862f02603f9 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -264,6 +264,7 @@ err_misc: static int actual_try_to_identify (ide_drive_t *drive, u8 cmd) { ide_hwif_t *hwif = HWIF(drive); + struct ide_io_ports *io_ports = &hwif->io_ports; int use_altstatus = 0, rc; unsigned long timeout; u8 s = 0, a = 0; @@ -271,7 +272,7 @@ static int actual_try_to_identify (ide_drive_t *drive, u8 cmd) /* take a deep breath */ msleep(50); - if (hwif->io_ports[IDE_CONTROL_OFFSET]) { + if (io_ports->ctl_addr) { a = ide_read_altstatus(drive); s = ide_read_status(drive); if ((a ^ s) & ~INDEX_STAT) @@ -289,10 +290,10 @@ static int actual_try_to_identify (ide_drive_t *drive, u8 cmd) */ if ((cmd == WIN_PIDENTIFY)) /* disable dma & overlap */ - hwif->OUTB(0, hwif->io_ports[IDE_FEATURE_OFFSET]); + hwif->OUTB(0, io_ports->feature_addr); /* ask drive for ID */ - hwif->OUTB(cmd, hwif->io_ports[IDE_COMMAND_OFFSET]); + hwif->OUTB(cmd, io_ports->command_addr); timeout = ((cmd == WIN_IDENTIFY) ? WAIT_WORSTCASE : WAIT_PIDENTIFY) / 2; timeout += jiffies; @@ -353,7 +354,7 @@ static int try_to_identify (ide_drive_t *drive, u8 cmd) * interrupts during the identify-phase that * the irq handler isn't expecting. */ - if (hwif->io_ports[IDE_CONTROL_OFFSET]) { + if (hwif->io_ports.ctl_addr) { if (!hwif->irq) { autoprobe = 1; cookie = probe_irq_on(); @@ -393,7 +394,7 @@ static int ide_busy_sleep(ide_hwif_t *hwif) do { msleep(50); - stat = hwif->INB(hwif->io_ports[IDE_STATUS_OFFSET]); + stat = hwif->INB(hwif->io_ports.status_addr); if ((stat & BUSY_STAT) == 0) return 0; } while (time_before(jiffies, timeout)); @@ -425,6 +426,7 @@ static int ide_busy_sleep(ide_hwif_t *hwif) static int do_probe (ide_drive_t *drive, u8 cmd) { ide_hwif_t *hwif = HWIF(drive); + struct ide_io_ports *io_ports = &hwif->io_ports; int rc; u8 stat; @@ -445,7 +447,7 @@ static int do_probe (ide_drive_t *drive, u8 cmd) msleep(50); SELECT_DRIVE(drive); msleep(50); - if (hwif->INB(hwif->io_ports[IDE_SELECT_OFFSET]) != drive->select.all && + if (hwif->INB(io_ports->device_addr) != drive->select.all && !drive->present) { if (drive->select.b.unit != 0) { /* exit with drive0 selected */ @@ -472,17 +474,13 @@ static int do_probe (ide_drive_t *drive, u8 cmd) if (stat == (BUSY_STAT | READY_STAT)) return 4; - if ((rc == 1 && cmd == WIN_PIDENTIFY) && - ((drive->autotune == IDE_TUNE_DEFAULT) || - (drive->autotune == IDE_TUNE_AUTO))) { + if (rc == 1 && cmd == WIN_PIDENTIFY) { printk(KERN_ERR "%s: no response (status = 0x%02x), " "resetting drive\n", drive->name, stat); msleep(50); - hwif->OUTB(drive->select.all, - hwif->io_ports[IDE_SELECT_OFFSET]); + hwif->OUTB(drive->select.all, io_ports->device_addr); msleep(50); - hwif->OUTB(WIN_SRST, - hwif->io_ports[IDE_COMMAND_OFFSET]); + hwif->OUTB(WIN_SRST, io_ports->command_addr); (void)ide_busy_sleep(hwif); rc = try_to_identify(drive, cmd); } @@ -518,7 +516,7 @@ static void enable_nest (ide_drive_t *drive) printk("%s: enabling %s -- ", hwif->name, drive->id->model); SELECT_DRIVE(drive); msleep(50); - hwif->OUTB(EXABYTE_ENABLE_NEST, hwif->io_ports[IDE_COMMAND_OFFSET]); + hwif->OUTB(EXABYTE_ENABLE_NEST, hwif->io_ports.command_addr); if (ide_busy_sleep(hwif)) { printk(KERN_CONT "failed (timeout)\n"); @@ -800,14 +798,9 @@ static int ide_probe_port(ide_hwif_t *hwif) if (drive->present) rc = 0; } - if (hwif->io_ports[IDE_CONTROL_OFFSET] && hwif->reset) { - printk(KERN_WARNING "%s: reset\n", hwif->name); - hwif->OUTB(12, hwif->io_ports[IDE_CONTROL_OFFSET]); - udelay(10); - hwif->OUTB(8, hwif->io_ports[IDE_CONTROL_OFFSET]); - (void)ide_busy_sleep(hwif); - } + local_irq_restore(flags); + /* * Use cached IRQ number. It might be (and is...) changed by probe * code above @@ -834,12 +827,7 @@ static void ide_port_tune_devices(ide_hwif_t *hwif) ide_drive_t *drive = &hwif->drives[unit]; if (drive->present) { - if (drive->autotune == IDE_TUNE_AUTO) - ide_set_max_pio(drive); - - if (drive->autotune != IDE_TUNE_DEFAULT && - drive->autotune != IDE_TUNE_AUTO) - continue; + ide_set_max_pio(drive); drive->nice1 = 1; @@ -994,6 +982,7 @@ static void ide_port_setup_devices(ide_hwif_t *hwif) */ static int init_irq (ide_hwif_t *hwif) { + struct ide_io_ports *io_ports = &hwif->io_ports; unsigned int index; ide_hwgroup_t *hwgroup; ide_hwif_t *match = NULL; @@ -1077,9 +1066,9 @@ static int init_irq (ide_hwif_t *hwif) if (IDE_CHIPSET_IS_PCI(hwif->chipset)) sa = IRQF_SHARED; - if (hwif->io_ports[IDE_CONTROL_OFFSET]) + if (io_ports->ctl_addr) /* clear nIEN */ - hwif->OUTB(0x08, hwif->io_ports[IDE_CONTROL_OFFSET]); + hwif->OUTB(0x08, io_ports->ctl_addr); if (request_irq(hwif->irq,&ide_intr,sa,hwif->name,hwgroup)) goto out_unlink; @@ -1095,12 +1084,11 @@ static int init_irq (ide_hwif_t *hwif) #if !defined(__mc68000__) printk("%s at 0x%03lx-0x%03lx,0x%03lx on irq %d", hwif->name, - hwif->io_ports[IDE_DATA_OFFSET], - hwif->io_ports[IDE_DATA_OFFSET]+7, - hwif->io_ports[IDE_CONTROL_OFFSET], hwif->irq); + io_ports->data_addr, io_ports->status_addr, + io_ports->ctl_addr, hwif->irq); #else printk("%s at 0x%08lx on irq %d", hwif->name, - hwif->io_ports[IDE_DATA_OFFSET], hwif->irq); + io_ports->data_addr, hwif->irq); #endif /* __mc68000__ */ if (match) printk(" (%sed with %s)", @@ -1242,8 +1230,8 @@ static int hwif_init(ide_hwif_t *hwif) int old_irq; if (!hwif->irq) { - if (!(hwif->irq = ide_default_irq(hwif->io_ports[IDE_DATA_OFFSET]))) - { + hwif->irq = ide_default_irq(hwif->io_ports.data_addr); + if (!hwif->irq) { printk("%s: DISABLED, NO IRQ\n", hwif->name); return 0; } @@ -1272,7 +1260,8 @@ static int hwif_init(ide_hwif_t *hwif) * It failed to initialise. Find the default IRQ for * this port and try that. */ - if (!(hwif->irq = ide_default_irq(hwif->io_ports[IDE_DATA_OFFSET]))) { + hwif->irq = ide_default_irq(hwif->io_ports.data_addr); + if (!hwif->irq) { printk("%s: Disabled unable to get IRQ %d.\n", hwif->name, old_irq); goto out; @@ -1336,8 +1325,6 @@ static void ide_port_init_devices(ide_hwif_t *hwif) drive->unmask = 1; if (hwif->host_flags & IDE_HFLAG_NO_UNMASK_IRQS) drive->no_unmask = 1; - if ((hwif->host_flags & IDE_HFLAG_NO_AUTOTUNE) == 0) - drive->autotune = 1; } if (port_ops && port_ops->port_init_devs) @@ -1518,13 +1505,20 @@ int ide_device_add_all(u8 *idx, const struct ide_port_info *d) int i, rc = 0; for (i = 0; i < MAX_HWIFS; i++) { - if (d == NULL || idx[i] == 0xff) { + if (idx[i] == 0xff) { mate = NULL; continue; } hwif = &ide_hwifs[idx[i]]; + ide_port_apply_params(hwif); + + if (d == NULL) { + mate = NULL; + continue; + } + if (d->chipset != ide_etrax100 && (i & 1) && mate) { hwif->mate = mate; mate->mate = hwif; @@ -1621,6 +1615,7 @@ EXPORT_SYMBOL_GPL(ide_device_add); void ide_port_scan(ide_hwif_t *hwif) { + ide_port_apply_params(hwif); ide_port_cable_detect(hwif); ide_port_init_devices(hwif); diff --git a/drivers/ide/ide-proc.c b/drivers/ide/ide-proc.c index d9d98ac85b2..7b2f3815a83 100644 --- a/drivers/ide/ide-proc.c +++ b/drivers/ide/ide-proc.c @@ -786,14 +786,6 @@ void ide_proc_register_port(ide_hwif_t *hwif) } } -#ifdef CONFIG_BLK_DEV_IDEPCI -void ide_pci_create_host_proc(const char *name, get_info_t *get_info) -{ - create_proc_info_entry(name, 0, proc_ide_root, get_info); -} -EXPORT_SYMBOL_GPL(ide_pci_create_host_proc); -#endif - void ide_proc_unregister_port(ide_hwif_t *hwif) { if (hwif->proc) { diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index d3d8b8d5157..29870c41511 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -72,26 +72,6 @@ enum { #endif /**************************** Tunable parameters *****************************/ - - -/* - * Pipelined mode parameters. - * - * We try to use the minimum number of stages which is enough to keep the tape - * constantly streaming. To accomplish that, we implement a feedback loop around - * the maximum number of stages: - * - * We start from MIN maximum stages (we will not even use MIN stages if we don't - * need them), increment it by RATE*(MAX-MIN) whenever we sense that the - * pipeline is empty, until we reach the optimum value or until we reach MAX. - * - * Setting the following parameter to 0 is illegal: the pipelined mode cannot be - * disabled (idetape_calculate_speeds() divides by tape->max_stages.) - */ -#define IDETAPE_MIN_PIPELINE_STAGES 1 -#define IDETAPE_MAX_PIPELINE_STAGES 400 -#define IDETAPE_INCREASE_STAGES_RATE 20 - /* * After each failed packet command we issue a request sense command and retry * the packet command IDETAPE_MAX_PC_RETRIES times. @@ -224,28 +204,17 @@ enum { /* 0 When the tape position is unknown */ IDETAPE_FLAG_ADDRESS_VALID = (1 << 1), /* Device already opened */ - IDETAPE_FLAG_BUSY = (1 << 2), - /* Error detected in a pipeline stage */ - IDETAPE_FLAG_PIPELINE_ERR = (1 << 3), + IDETAPE_FLAG_BUSY = (1 << 2), /* Attempt to auto-detect the current user block size */ - IDETAPE_FLAG_DETECT_BS = (1 << 4), + IDETAPE_FLAG_DETECT_BS = (1 << 3), /* Currently on a filemark */ - IDETAPE_FLAG_FILEMARK = (1 << 5), + IDETAPE_FLAG_FILEMARK = (1 << 4), /* DRQ interrupt device */ - IDETAPE_FLAG_DRQ_INTERRUPT = (1 << 6), - /* pipeline active */ - IDETAPE_FLAG_PIPELINE_ACTIVE = (1 << 7), + IDETAPE_FLAG_DRQ_INTERRUPT = (1 << 5), /* 0 = no tape is loaded, so we don't rewind after ejecting */ - IDETAPE_FLAG_MEDIUM_PRESENT = (1 << 8), + IDETAPE_FLAG_MEDIUM_PRESENT = (1 << 6), }; -/* A pipeline stage. */ -typedef struct idetape_stage_s { - struct request rq; /* The corresponding request */ - struct idetape_bh *bh; /* The data buffers */ - struct idetape_stage_s *next; /* Pointer to the next stage */ -} idetape_stage_t; - /* * Most of our global data which we need to save even as we leave the driver due * to an interrupt or a timer event is stored in the struct defined below. @@ -289,9 +258,7 @@ typedef struct ide_tape_obj { * While polling for DSC we use postponed_rq to postpone the current * request so that ide.c will be able to service pending requests on the * other device. Note that at most we will have only one DSC (usually - * data transfer) request in the device request queue. Additional - * requests can be queued in our internal pipeline, but they will be - * visible to ide.c only one at a time. + * data transfer) request in the device request queue. */ struct request *postponed_rq; /* The time in which we started polling for DSC */ @@ -331,43 +298,20 @@ typedef struct ide_tape_obj { * At most, there is only one ide-tape originated data transfer request * in the device request queue. This allows ide.c to easily service * requests from the other device when we postpone our active request. - * In the pipelined operation mode, we use our internal pipeline - * structure to hold more data requests. The data buffer size is chosen - * based on the tape's recommendation. */ - /* ptr to the request which is waiting in the device request queue */ - struct request *active_data_rq; + /* Data buffer size chosen based on the tape's recommendation */ - int stage_size; - idetape_stage_t *merge_stage; - int merge_stage_size; + int buffer_size; + /* merge buffer */ + struct idetape_bh *merge_bh; + /* size of the merge buffer */ + int merge_bh_size; + /* pointer to current buffer head within the merge buffer */ struct idetape_bh *bh; char *b_data; int b_count; - /* - * Pipeline parameters. - * - * To accomplish non-pipelined mode, we simply set the following - * variables to zero (or NULL, where appropriate). - */ - /* Number of currently used stages */ - int nr_stages; - /* Number of pending stages */ - int nr_pending_stages; - /* We will not allocate more than this number of stages */ - int max_stages, min_pipeline, max_pipeline; - /* The first stage which will be removed from the pipeline */ - idetape_stage_t *first_stage; - /* The currently active stage */ - idetape_stage_t *active_stage; - /* Will be serviced after the currently active request */ - idetape_stage_t *next_stage; - /* New requests will be added to the pipeline here */ - idetape_stage_t *last_stage; - /* Optional free stage which we can use */ - idetape_stage_t *cache_stage; - int pages_per_stage; + int pages_per_buffer; /* Wasted space in each stage */ int excess_bh_size; @@ -388,45 +332,6 @@ typedef struct ide_tape_obj { /* the tape is write protected (hardware or opened as read-only) */ char write_prot; - /* - * Limit the number of times a request can be postponed, to avoid an - * infinite postpone deadlock. - */ - int postpone_cnt; - - /* - * Measures number of frames: - * - * 1. written/read to/from the driver pipeline (pipeline_head). - * 2. written/read to/from the tape buffers (idetape_bh). - * 3. written/read by the tape to/from the media (tape_head). - */ - int pipeline_head; - int buffer_head; - int tape_head; - int last_tape_head; - - /* Speed control at the tape buffers input/output */ - unsigned long insert_time; - int insert_size; - int insert_speed; - int max_insert_speed; - int measure_insert_time; - - /* Speed regulation negative feedback loop */ - int speed_control; - int pipeline_head_speed; - int controlled_pipeline_head_speed; - int uncontrolled_pipeline_head_speed; - int controlled_last_pipeline_head; - unsigned long uncontrolled_pipeline_head_time; - unsigned long controlled_pipeline_head_time; - int controlled_previous_pipeline_head; - int uncontrolled_previous_pipeline_head; - unsigned long controlled_previous_head_time; - unsigned long uncontrolled_previous_head_time; - int restart_speed_control_req; - u32 debug_mask; } idetape_tape_t; @@ -674,128 +579,36 @@ static void idetape_analyze_error(ide_drive_t *drive, u8 *sense) } } -static void idetape_activate_next_stage(ide_drive_t *drive) +/* Free data buffers completely. */ +static void ide_tape_kfree_buffer(idetape_tape_t *tape) { - idetape_tape_t *tape = drive->driver_data; - idetape_stage_t *stage = tape->next_stage; - struct request *rq = &stage->rq; + struct idetape_bh *prev_bh, *bh = tape->merge_bh; - debug_log(DBG_PROCS, "Enter %s\n", __func__); + while (bh) { + u32 size = bh->b_size; - if (stage == NULL) { - printk(KERN_ERR "ide-tape: bug: Trying to activate a non" - " existing stage\n"); - return; - } + while (size) { + unsigned int order = fls(size >> PAGE_SHIFT)-1; - rq->rq_disk = tape->disk; - rq->buffer = NULL; - rq->special = (void *)stage->bh; - tape->active_data_rq = rq; - tape->active_stage = stage; - tape->next_stage = stage->next; -} - -/* Free a stage along with its related buffers completely. */ -static void __idetape_kfree_stage(idetape_stage_t *stage) -{ - struct idetape_bh *prev_bh, *bh = stage->bh; - int size; - - while (bh != NULL) { - if (bh->b_data != NULL) { - size = (int) bh->b_size; - while (size > 0) { - free_page((unsigned long) bh->b_data); - size -= PAGE_SIZE; - bh->b_data += PAGE_SIZE; - } + if (bh->b_data) + free_pages((unsigned long)bh->b_data, order); + + size &= (order-1); + bh->b_data += (1 << order) * PAGE_SIZE; } prev_bh = bh; bh = bh->b_reqnext; kfree(prev_bh); } - kfree(stage); -} - -static void idetape_kfree_stage(idetape_tape_t *tape, idetape_stage_t *stage) -{ - __idetape_kfree_stage(stage); -} - -/* - * Remove tape->first_stage from the pipeline. The caller should avoid race - * conditions. - */ -static void idetape_remove_stage_head(ide_drive_t *drive) -{ - idetape_tape_t *tape = drive->driver_data; - idetape_stage_t *stage; - - debug_log(DBG_PROCS, "Enter %s\n", __func__); - - if (tape->first_stage == NULL) { - printk(KERN_ERR "ide-tape: bug: tape->first_stage is NULL\n"); - return; - } - if (tape->active_stage == tape->first_stage) { - printk(KERN_ERR "ide-tape: bug: Trying to free our active " - "pipeline stage\n"); - return; - } - stage = tape->first_stage; - tape->first_stage = stage->next; - idetape_kfree_stage(tape, stage); - tape->nr_stages--; - if (tape->first_stage == NULL) { - tape->last_stage = NULL; - if (tape->next_stage != NULL) - printk(KERN_ERR "ide-tape: bug: tape->next_stage !=" - " NULL\n"); - if (tape->nr_stages) - printk(KERN_ERR "ide-tape: bug: nr_stages should be 0 " - "now\n"); - } + kfree(tape->merge_bh); } -/* - * This will free all the pipeline stages starting from new_last_stage->next - * to the end of the list, and point tape->last_stage to new_last_stage. - */ -static void idetape_abort_pipeline(ide_drive_t *drive, - idetape_stage_t *new_last_stage) -{ - idetape_tape_t *tape = drive->driver_data; - idetape_stage_t *stage = new_last_stage->next; - idetape_stage_t *nstage; - - debug_log(DBG_PROCS, "%s: Enter %s\n", tape->name, __func__); - - while (stage) { - nstage = stage->next; - idetape_kfree_stage(tape, stage); - --tape->nr_stages; - --tape->nr_pending_stages; - stage = nstage; - } - if (new_last_stage) - new_last_stage->next = NULL; - tape->last_stage = new_last_stage; - tape->next_stage = NULL; -} - -/* - * Finish servicing a request and insert a pending pipeline request into the - * main device queue. - */ static int idetape_end_request(ide_drive_t *drive, int uptodate, int nr_sects) { struct request *rq = HWGROUP(drive)->rq; idetape_tape_t *tape = drive->driver_data; unsigned long flags; int error; - int remove_stage = 0; - idetape_stage_t *active_stage; debug_log(DBG_PROCS, "Enter %s\n", __func__); @@ -815,58 +628,8 @@ static int idetape_end_request(ide_drive_t *drive, int uptodate, int nr_sects) spin_lock_irqsave(&tape->lock, flags); - /* The request was a pipelined data transfer request */ - if (tape->active_data_rq == rq) { - active_stage = tape->active_stage; - tape->active_stage = NULL; - tape->active_data_rq = NULL; - tape->nr_pending_stages--; - if (rq->cmd[0] & REQ_IDETAPE_WRITE) { - remove_stage = 1; - if (error) { - set_bit(IDETAPE_FLAG_PIPELINE_ERR, - &tape->flags); - if (error == IDETAPE_ERROR_EOD) - idetape_abort_pipeline(drive, - active_stage); - } - } else if (rq->cmd[0] & REQ_IDETAPE_READ) { - if (error == IDETAPE_ERROR_EOD) { - set_bit(IDETAPE_FLAG_PIPELINE_ERR, - &tape->flags); - idetape_abort_pipeline(drive, active_stage); - } - } - if (tape->next_stage != NULL) { - idetape_activate_next_stage(drive); - - /* Insert the next request into the request queue. */ - (void)ide_do_drive_cmd(drive, tape->active_data_rq, - ide_end); - } else if (!error) { - /* - * This is a part of the feedback loop which tries to - * find the optimum number of stages. We are starting - * from a minimum maximum number of stages, and if we - * sense that the pipeline is empty, we try to increase - * it, until we reach the user compile time memory - * limit. - */ - int i = (tape->max_pipeline - tape->min_pipeline) / 10; - - tape->max_stages += max(i, 1); - tape->max_stages = max(tape->max_stages, - tape->min_pipeline); - tape->max_stages = min(tape->max_stages, - tape->max_pipeline); - } - } ide_end_drive_cmd(drive, 0, 0); - if (remove_stage) - idetape_remove_stage_head(drive); - if (tape->active_data_rq == NULL) - clear_bit(IDETAPE_FLAG_PIPELINE_ACTIVE, &tape->flags); spin_unlock_irqrestore(&tape->lock, flags); return 0; } @@ -1083,10 +846,10 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive) return ide_do_reset(drive); } /* Get the number of bytes to transfer on this interrupt. */ - bcount = (hwif->INB(hwif->io_ports[IDE_BCOUNTH_OFFSET]) << 8) | - hwif->INB(hwif->io_ports[IDE_BCOUNTL_OFFSET]); + bcount = (hwif->INB(hwif->io_ports.lbah_addr) << 8) | + hwif->INB(hwif->io_ports.lbam_addr); - ireason = hwif->INB(hwif->io_ports[IDE_IREASON_OFFSET]); + ireason = hwif->INB(hwif->io_ports.nsect_addr); if (ireason & CD) { printk(KERN_ERR "ide-tape: CoD != 0 in %s\n", __func__); @@ -1190,12 +953,12 @@ static ide_startstop_t idetape_transfer_pc(ide_drive_t *drive) "yet DRQ isn't asserted\n"); return startstop; } - ireason = hwif->INB(hwif->io_ports[IDE_IREASON_OFFSET]); + ireason = hwif->INB(hwif->io_ports.nsect_addr); while (retries-- && ((ireason & CD) == 0 || (ireason & IO))) { printk(KERN_ERR "ide-tape: (IO,CoD != (0,1) while issuing " "a packet command, retrying\n"); udelay(100); - ireason = hwif->INB(hwif->io_ports[IDE_IREASON_OFFSET]); + ireason = hwif->INB(hwif->io_ports.nsect_addr); if (retries == 0) { printk(KERN_ERR "ide-tape: (IO,CoD != (0,1) while " "issuing a packet command, ignoring\n"); @@ -1292,7 +1055,7 @@ static ide_startstop_t idetape_issue_pc(ide_drive_t *drive, IDETAPE_WAIT_CMD, NULL); return ide_started; } else { - hwif->OUTB(WIN_PACKETCMD, hwif->io_ports[IDE_COMMAND_OFFSET]); + hwif->OUTB(WIN_PACKETCMD, hwif->io_ports.command_addr); return idetape_transfer_pc(drive); } } @@ -1335,69 +1098,6 @@ static void idetape_create_mode_sense_cmd(struct ide_atapi_pc *pc, u8 page_code) pc->idetape_callback = &idetape_pc_callback; } -static void idetape_calculate_speeds(ide_drive_t *drive) -{ - idetape_tape_t *tape = drive->driver_data; - - if (time_after(jiffies, - tape->controlled_pipeline_head_time + 120 * HZ)) { - tape->controlled_previous_pipeline_head = - tape->controlled_last_pipeline_head; - tape->controlled_previous_head_time = - tape->controlled_pipeline_head_time; - tape->controlled_last_pipeline_head = tape->pipeline_head; - tape->controlled_pipeline_head_time = jiffies; - } - if (time_after(jiffies, tape->controlled_pipeline_head_time + 60 * HZ)) - tape->controlled_pipeline_head_speed = (tape->pipeline_head - - tape->controlled_last_pipeline_head) * 32 * HZ / - (jiffies - tape->controlled_pipeline_head_time); - else if (time_after(jiffies, tape->controlled_previous_head_time)) - tape->controlled_pipeline_head_speed = (tape->pipeline_head - - tape->controlled_previous_pipeline_head) * 32 * - HZ / (jiffies - tape->controlled_previous_head_time); - - if (tape->nr_pending_stages < tape->max_stages/*- 1 */) { - /* -1 for read mode error recovery */ - if (time_after(jiffies, tape->uncontrolled_previous_head_time + - 10 * HZ)) { - tape->uncontrolled_pipeline_head_time = jiffies; - tape->uncontrolled_pipeline_head_speed = - (tape->pipeline_head - - tape->uncontrolled_previous_pipeline_head) * - 32 * HZ / (jiffies - - tape->uncontrolled_previous_head_time); - } - } else { - tape->uncontrolled_previous_head_time = jiffies; - tape->uncontrolled_previous_pipeline_head = tape->pipeline_head; - if (time_after(jiffies, tape->uncontrolled_pipeline_head_time + - 30 * HZ)) - tape->uncontrolled_pipeline_head_time = jiffies; - - } - tape->pipeline_head_speed = max(tape->uncontrolled_pipeline_head_speed, - tape->controlled_pipeline_head_speed); - - if (tape->speed_control == 1) { - if (tape->nr_pending_stages >= tape->max_stages / 2) - tape->max_insert_speed = tape->pipeline_head_speed + - (1100 - tape->pipeline_head_speed) * 2 * - (tape->nr_pending_stages - tape->max_stages / 2) - / tape->max_stages; - else - tape->max_insert_speed = 500 + - (tape->pipeline_head_speed - 500) * 2 * - tape->nr_pending_stages / tape->max_stages; - - if (tape->nr_pending_stages >= tape->max_stages * 99 / 100) - tape->max_insert_speed = 5000; - } else - tape->max_insert_speed = tape->speed_control; - - tape->max_insert_speed = max(tape->max_insert_speed, 500); -} - static ide_startstop_t idetape_media_access_finished(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; @@ -1432,17 +1132,7 @@ static ide_startstop_t idetape_rw_callback(ide_drive_t *drive) int blocks = tape->pc->xferred / tape->blk_size; tape->avg_size += blocks * tape->blk_size; - tape->insert_size += blocks * tape->blk_size; - if (tape->insert_size > 1024 * 1024) - tape->measure_insert_time = 1; - if (tape->measure_insert_time) { - tape->measure_insert_time = 0; - tape->insert_time = jiffies; - tape->insert_size = 0; - } - if (time_after(jiffies, tape->insert_time)) - tape->insert_speed = tape->insert_size / 1024 * HZ / - (jiffies - tape->insert_time); + if (time_after_eq(jiffies, tape->avg_time + HZ)) { tape->avg_speed = tape->avg_size * HZ / (jiffies - tape->avg_time) / 1024; @@ -1475,7 +1165,7 @@ static void idetape_create_read_cmd(idetape_tape_t *tape, pc->buf = NULL; pc->buf_size = length * tape->blk_size; pc->req_xfer = pc->buf_size; - if (pc->req_xfer == tape->stage_size) + if (pc->req_xfer == tape->buffer_size) pc->flags |= PC_FLAG_DMA_RECOMMENDED; } @@ -1495,7 +1185,7 @@ static void idetape_create_write_cmd(idetape_tape_t *tape, pc->buf = NULL; pc->buf_size = length * tape->blk_size; pc->req_xfer = pc->buf_size; - if (pc->req_xfer == tape->stage_size) + if (pc->req_xfer == tape->buffer_size) pc->flags |= PC_FLAG_DMA_RECOMMENDED; } @@ -1547,10 +1237,6 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive, drive->post_reset = 0; } - if (time_after(jiffies, tape->insert_time)) - tape->insert_speed = tape->insert_size / 1024 * HZ / - (jiffies - tape->insert_time); - idetape_calculate_speeds(drive); if (!test_and_clear_bit(IDETAPE_FLAG_IGNORE_DSC, &tape->flags) && (stat & SEEK_STAT) == 0) { if (postponed_rq == NULL) { @@ -1574,16 +1260,12 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive, return ide_stopped; } if (rq->cmd[0] & REQ_IDETAPE_READ) { - tape->buffer_head++; - tape->postpone_cnt = 0; pc = idetape_next_pc_storage(drive); idetape_create_read_cmd(tape, pc, rq->current_nr_sectors, (struct idetape_bh *)rq->special); goto out; } if (rq->cmd[0] & REQ_IDETAPE_WRITE) { - tape->buffer_head++; - tape->postpone_cnt = 0; pc = idetape_next_pc_storage(drive); idetape_create_write_cmd(tape, pc, rq->current_nr_sectors, (struct idetape_bh *)rq->special); @@ -1604,103 +1286,91 @@ out: return idetape_issue_pc(drive, pc); } -/* Pipeline related functions */ - /* - * The function below uses __get_free_page to allocate a pipeline stage, along - * with all the necessary small buffers which together make a buffer of size - * tape->stage_size (or a bit more). We attempt to combine sequential pages as + * The function below uses __get_free_pages to allocate a data buffer of size + * tape->buffer_size (or a bit more). We attempt to combine sequential pages as * much as possible. * - * It returns a pointer to the new allocated stage, or NULL if we can't (or - * don't want to) allocate a stage. - * - * Pipeline stages are optional and are used to increase performance. If we - * can't allocate them, we'll manage without them. + * It returns a pointer to the newly allocated buffer, or NULL in case of + * failure. */ -static idetape_stage_t *__idetape_kmalloc_stage(idetape_tape_t *tape, int full, - int clear) +static struct idetape_bh *ide_tape_kmalloc_buffer(idetape_tape_t *tape, + int full, int clear) { - idetape_stage_t *stage; - struct idetape_bh *prev_bh, *bh; - int pages = tape->pages_per_stage; + struct idetape_bh *prev_bh, *bh, *merge_bh; + int pages = tape->pages_per_buffer; + unsigned int order, b_allocd; char *b_data = NULL; - stage = kmalloc(sizeof(idetape_stage_t), GFP_KERNEL); - if (!stage) - return NULL; - stage->next = NULL; - - stage->bh = kmalloc(sizeof(struct idetape_bh), GFP_KERNEL); - bh = stage->bh; + merge_bh = kmalloc(sizeof(struct idetape_bh), GFP_KERNEL); + bh = merge_bh; if (bh == NULL) goto abort; - bh->b_reqnext = NULL; - bh->b_data = (char *) __get_free_page(GFP_KERNEL); + + order = fls(pages) - 1; + bh->b_data = (char *) __get_free_pages(GFP_KERNEL, order); if (!bh->b_data) goto abort; + b_allocd = (1 << order) * PAGE_SIZE; + pages &= (order-1); + if (clear) - memset(bh->b_data, 0, PAGE_SIZE); - bh->b_size = PAGE_SIZE; + memset(bh->b_data, 0, b_allocd); + bh->b_reqnext = NULL; + bh->b_size = b_allocd; atomic_set(&bh->b_count, full ? bh->b_size : 0); - while (--pages) { - b_data = (char *) __get_free_page(GFP_KERNEL); + while (pages) { + order = fls(pages) - 1; + b_data = (char *) __get_free_pages(GFP_KERNEL, order); if (!b_data) goto abort; + b_allocd = (1 << order) * PAGE_SIZE; + if (clear) - memset(b_data, 0, PAGE_SIZE); - if (bh->b_data == b_data + PAGE_SIZE) { - bh->b_size += PAGE_SIZE; - bh->b_data -= PAGE_SIZE; + memset(b_data, 0, b_allocd); + + /* newly allocated page frames below buffer header or ...*/ + if (bh->b_data == b_data + b_allocd) { + bh->b_size += b_allocd; + bh->b_data -= b_allocd; if (full) - atomic_add(PAGE_SIZE, &bh->b_count); + atomic_add(b_allocd, &bh->b_count); continue; } + /* they are above the header */ if (b_data == bh->b_data + bh->b_size) { - bh->b_size += PAGE_SIZE; + bh->b_size += b_allocd; if (full) - atomic_add(PAGE_SIZE, &bh->b_count); + atomic_add(b_allocd, &bh->b_count); continue; } prev_bh = bh; bh = kmalloc(sizeof(struct idetape_bh), GFP_KERNEL); if (!bh) { - free_page((unsigned long) b_data); + free_pages((unsigned long) b_data, order); goto abort; } bh->b_reqnext = NULL; bh->b_data = b_data; - bh->b_size = PAGE_SIZE; + bh->b_size = b_allocd; atomic_set(&bh->b_count, full ? bh->b_size : 0); prev_bh->b_reqnext = bh; + + pages &= (order-1); } + bh->b_size -= tape->excess_bh_size; if (full) atomic_sub(tape->excess_bh_size, &bh->b_count); - return stage; + return merge_bh; abort: - __idetape_kfree_stage(stage); + ide_tape_kfree_buffer(tape); return NULL; } -static idetape_stage_t *idetape_kmalloc_stage(idetape_tape_t *tape) -{ - idetape_stage_t *cache_stage = tape->cache_stage; - - debug_log(DBG_PROCS, "Enter %s\n", __func__); - - if (tape->nr_stages >= tape->max_stages) - return NULL; - if (cache_stage != NULL) { - tape->cache_stage = NULL; - return cache_stage; - } - return __idetape_kmalloc_stage(tape, 0, 0); -} - static int idetape_copy_stage_from_user(idetape_tape_t *tape, - idetape_stage_t *stage, const char __user *buf, int n) + const char __user *buf, int n) { struct idetape_bh *bh = tape->bh; int count; @@ -1732,7 +1402,7 @@ static int idetape_copy_stage_from_user(idetape_tape_t *tape, } static int idetape_copy_stage_to_user(idetape_tape_t *tape, char __user *buf, - idetape_stage_t *stage, int n) + int n) { struct idetape_bh *bh = tape->bh; int count; @@ -1763,11 +1433,11 @@ static int idetape_copy_stage_to_user(idetape_tape_t *tape, char __user *buf, return ret; } -static void idetape_init_merge_stage(idetape_tape_t *tape) +static void idetape_init_merge_buffer(idetape_tape_t *tape) { - struct idetape_bh *bh = tape->merge_stage->bh; + struct idetape_bh *bh = tape->merge_bh; + tape->bh = tape->merge_bh; - tape->bh = bh; if (tape->chrdev_dir == IDETAPE_DIR_WRITE) atomic_set(&bh->b_count, 0); else { @@ -1776,61 +1446,6 @@ static void idetape_init_merge_stage(idetape_tape_t *tape) } } -static void idetape_switch_buffers(idetape_tape_t *tape, idetape_stage_t *stage) -{ - struct idetape_bh *tmp; - - tmp = stage->bh; - stage->bh = tape->merge_stage->bh; - tape->merge_stage->bh = tmp; - idetape_init_merge_stage(tape); -} - -/* Add a new stage at the end of the pipeline. */ -static void idetape_add_stage_tail(ide_drive_t *drive, idetape_stage_t *stage) -{ - idetape_tape_t *tape = drive->driver_data; - unsigned long flags; - - debug_log(DBG_PROCS, "Enter %s\n", __func__); - - spin_lock_irqsave(&tape->lock, flags); - stage->next = NULL; - if (tape->last_stage != NULL) - tape->last_stage->next = stage; - else - tape->first_stage = stage; - tape->next_stage = stage; - tape->last_stage = stage; - if (tape->next_stage == NULL) - tape->next_stage = tape->last_stage; - tape->nr_stages++; - tape->nr_pending_stages++; - spin_unlock_irqrestore(&tape->lock, flags); -} - -/* Install a completion in a pending request and sleep until it is serviced. The - * caller should ensure that the request will not be serviced before we install - * the completion (usually by disabling interrupts). - */ -static void idetape_wait_for_request(ide_drive_t *drive, struct request *rq) -{ - DECLARE_COMPLETION_ONSTACK(wait); - idetape_tape_t *tape = drive->driver_data; - - if (rq == NULL || !blk_special_request(rq)) { - printk(KERN_ERR "ide-tape: bug: Trying to sleep on non-valid" - " request\n"); - return; - } - rq->end_io_data = &wait; - rq->end_io = blk_end_sync_rq; - spin_unlock_irq(&tape->lock); - wait_for_completion(&wait); - /* The stage and its struct request have been deallocated */ - spin_lock_irq(&tape->lock); -} - static ide_startstop_t idetape_read_position_callback(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; @@ -1899,7 +1514,7 @@ static void idetape_create_test_unit_ready_cmd(struct ide_atapi_pc *pc) * to the request list without waiting for it to be serviced! In that case, we * usually use idetape_queue_pc_head(). */ -static int __idetape_queue_pc_tail(ide_drive_t *drive, struct ide_atapi_pc *pc) +static int idetape_queue_pc_tail(ide_drive_t *drive, struct ide_atapi_pc *pc) { struct ide_tape_obj *tape = drive->driver_data; struct request rq; @@ -1931,7 +1546,7 @@ static int idetape_wait_ready(ide_drive_t *drive, unsigned long timeout) timeout += jiffies; while (time_before(jiffies, timeout)) { idetape_create_test_unit_ready_cmd(&pc); - if (!__idetape_queue_pc_tail(drive, &pc)) + if (!idetape_queue_pc_tail(drive, &pc)) return 0; if ((tape->sense_key == 2 && tape->asc == 4 && tape->ascq == 2) || (tape->asc == 0x3A)) { @@ -1940,7 +1555,7 @@ static int idetape_wait_ready(ide_drive_t *drive, unsigned long timeout) return -ENOMEDIUM; idetape_create_load_unload_cmd(drive, &pc, IDETAPE_LU_LOAD_MASK); - __idetape_queue_pc_tail(drive, &pc); + idetape_queue_pc_tail(drive, &pc); load_attempted = 1; /* not about to be ready */ } else if (!(tape->sense_key == 2 && tape->asc == 4 && @@ -1951,11 +1566,6 @@ static int idetape_wait_ready(ide_drive_t *drive, unsigned long timeout) return -EIO; } -static int idetape_queue_pc_tail(ide_drive_t *drive, struct ide_atapi_pc *pc) -{ - return __idetape_queue_pc_tail(drive, pc); -} - static int idetape_flush_tape_buffers(ide_drive_t *drive) { struct ide_atapi_pc pc; @@ -2021,50 +1631,21 @@ static int idetape_create_prevent_cmd(ide_drive_t *drive, return 1; } -static int __idetape_discard_read_pipeline(ide_drive_t *drive) +static void __ide_tape_discard_merge_buffer(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; - unsigned long flags; - int cnt; if (tape->chrdev_dir != IDETAPE_DIR_READ) - return 0; + return; - /* Remove merge stage. */ - cnt = tape->merge_stage_size / tape->blk_size; - if (test_and_clear_bit(IDETAPE_FLAG_FILEMARK, &tape->flags)) - ++cnt; /* Filemarks count as 1 sector */ - tape->merge_stage_size = 0; - if (tape->merge_stage != NULL) { - __idetape_kfree_stage(tape->merge_stage); - tape->merge_stage = NULL; + clear_bit(IDETAPE_FLAG_FILEMARK, &tape->flags); + tape->merge_bh_size = 0; + if (tape->merge_bh != NULL) { + ide_tape_kfree_buffer(tape); + tape->merge_bh = NULL; } - /* Clear pipeline flags. */ - clear_bit(IDETAPE_FLAG_PIPELINE_ERR, &tape->flags); tape->chrdev_dir = IDETAPE_DIR_NONE; - - /* Remove pipeline stages. */ - if (tape->first_stage == NULL) - return 0; - - spin_lock_irqsave(&tape->lock, flags); - tape->next_stage = NULL; - if (test_bit(IDETAPE_FLAG_PIPELINE_ACTIVE, &tape->flags)) - idetape_wait_for_request(drive, tape->active_data_rq); - spin_unlock_irqrestore(&tape->lock, flags); - - while (tape->first_stage != NULL) { - struct request *rq_ptr = &tape->first_stage->rq; - - cnt += rq_ptr->nr_sectors - rq_ptr->current_nr_sectors; - if (rq_ptr->errors == IDETAPE_ERROR_FILEMARK) - ++cnt; - idetape_remove_stage_head(drive); - } - tape->nr_pending_stages = 0; - tape->max_stages = tape->min_pipeline; - return cnt; } /* @@ -2081,7 +1662,7 @@ static int idetape_position_tape(ide_drive_t *drive, unsigned int block, struct ide_atapi_pc pc; if (tape->chrdev_dir == IDETAPE_DIR_READ) - __idetape_discard_read_pipeline(drive); + __ide_tape_discard_merge_buffer(drive); idetape_wait_ready(drive, 60 * 5 * HZ); idetape_create_locate_cmd(drive, &pc, block, partition, skip); retval = idetape_queue_pc_tail(drive, &pc); @@ -2092,20 +1673,19 @@ static int idetape_position_tape(ide_drive_t *drive, unsigned int block, return (idetape_queue_pc_tail(drive, &pc)); } -static void idetape_discard_read_pipeline(ide_drive_t *drive, +static void ide_tape_discard_merge_buffer(ide_drive_t *drive, int restore_position) { idetape_tape_t *tape = drive->driver_data; - int cnt; int seek, position; - cnt = __idetape_discard_read_pipeline(drive); + __ide_tape_discard_merge_buffer(drive); if (restore_position) { position = idetape_read_position(drive); - seek = position > cnt ? position - cnt : 0; + seek = position > 0 ? position : 0; if (idetape_position_tape(drive, seek, 0, 0)) { printk(KERN_INFO "ide-tape: %s: position_tape failed in" - " discard_pipeline()\n", tape->name); + " %s\n", tape->name, __func__); return; } } @@ -2123,12 +1703,6 @@ static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int blocks, debug_log(DBG_SENSE, "%s: cmd=%d\n", __func__, cmd); - if (test_bit(IDETAPE_FLAG_PIPELINE_ACTIVE, &tape->flags)) { - printk(KERN_ERR "ide-tape: bug: the pipeline is active in %s\n", - __func__); - return (0); - } - idetape_init_rq(&rq, cmd); rq.rq_disk = tape->disk; rq.special = (void *)bh; @@ -2140,26 +1714,13 @@ static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int blocks, if ((cmd & (REQ_IDETAPE_READ | REQ_IDETAPE_WRITE)) == 0) return 0; - if (tape->merge_stage) - idetape_init_merge_stage(tape); + if (tape->merge_bh) + idetape_init_merge_buffer(tape); if (rq.errors == IDETAPE_ERROR_GENERAL) return -EIO; return (tape->blk_size * (blocks-rq.current_nr_sectors)); } -/* start servicing the pipeline stages, starting from tape->next_stage. */ -static void idetape_plug_pipeline(ide_drive_t *drive) -{ - idetape_tape_t *tape = drive->driver_data; - - if (tape->next_stage == NULL) - return; - if (!test_and_set_bit(IDETAPE_FLAG_PIPELINE_ACTIVE, &tape->flags)) { - idetape_activate_next_stage(drive); - (void) ide_do_drive_cmd(drive, tape->active_data_rq, ide_end); - } -} - static void idetape_create_inquiry_cmd(struct ide_atapi_pc *pc) { idetape_init_pc(pc); @@ -2197,137 +1758,39 @@ static void idetape_create_space_cmd(struct ide_atapi_pc *pc, int count, u8 cmd) pc->idetape_callback = &idetape_pc_callback; } -static void idetape_wait_first_stage(ide_drive_t *drive) -{ - idetape_tape_t *tape = drive->driver_data; - unsigned long flags; - - if (tape->first_stage == NULL) - return; - spin_lock_irqsave(&tape->lock, flags); - if (tape->active_stage == tape->first_stage) - idetape_wait_for_request(drive, tape->active_data_rq); - spin_unlock_irqrestore(&tape->lock, flags); -} - -/* - * Try to add a character device originated write request to our pipeline. In - * case we don't succeed, we revert to non-pipelined operation mode for this - * request. In order to accomplish that, we - * - * 1. Try to allocate a new pipeline stage. - * 2. If we can't, wait for more and more requests to be serviced and try again - * each time. - * 3. If we still can't allocate a stage, fallback to non-pipelined operation - * mode for this request. - */ +/* Queue up a character device originated write request. */ static int idetape_add_chrdev_write_request(ide_drive_t *drive, int blocks) { idetape_tape_t *tape = drive->driver_data; - idetape_stage_t *new_stage; - unsigned long flags; - struct request *rq; debug_log(DBG_CHRDEV, "Enter %s\n", __func__); - /* Attempt to allocate a new stage. Beware possible race conditions. */ - while ((new_stage = idetape_kmalloc_stage(tape)) == NULL) { - spin_lock_irqsave(&tape->lock, flags); - if (test_bit(IDETAPE_FLAG_PIPELINE_ACTIVE, &tape->flags)) { - idetape_wait_for_request(drive, tape->active_data_rq); - spin_unlock_irqrestore(&tape->lock, flags); - } else { - spin_unlock_irqrestore(&tape->lock, flags); - idetape_plug_pipeline(drive); - if (test_bit(IDETAPE_FLAG_PIPELINE_ACTIVE, - &tape->flags)) - continue; - /* - * The machine is short on memory. Fallback to non- - * pipelined operation mode for this request. - */ - return idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, - blocks, tape->merge_stage->bh); - } - } - rq = &new_stage->rq; - idetape_init_rq(rq, REQ_IDETAPE_WRITE); - /* Doesn't actually matter - We always assume sequential access */ - rq->sector = tape->first_frame; - rq->current_nr_sectors = blocks; - rq->nr_sectors = blocks; - - idetape_switch_buffers(tape, new_stage); - idetape_add_stage_tail(drive, new_stage); - tape->pipeline_head++; - idetape_calculate_speeds(drive); - - /* - * Estimate whether the tape has stopped writing by checking if our - * write pipeline is currently empty. If we are not writing anymore, - * wait for the pipeline to be almost completely full (90%) before - * starting to service requests, so that we will be able to keep up with - * the higher speeds of the tape. - */ - if (!test_bit(IDETAPE_FLAG_PIPELINE_ACTIVE, &tape->flags)) { - if (tape->nr_stages >= tape->max_stages * 9 / 10 || - tape->nr_stages >= tape->max_stages - - tape->uncontrolled_pipeline_head_speed * 3 * 1024 / - tape->blk_size) { - tape->measure_insert_time = 1; - tape->insert_time = jiffies; - tape->insert_size = 0; - tape->insert_speed = 0; - idetape_plug_pipeline(drive); - } - } - if (test_and_clear_bit(IDETAPE_FLAG_PIPELINE_ERR, &tape->flags)) - /* Return a deferred error */ - return -EIO; - return blocks; + return idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, + blocks, tape->merge_bh); } -/* - * Wait until all pending pipeline requests are serviced. Typically called on - * device close. - */ -static void idetape_wait_for_pipeline(ide_drive_t *drive) -{ - idetape_tape_t *tape = drive->driver_data; - unsigned long flags; - - while (tape->next_stage || test_bit(IDETAPE_FLAG_PIPELINE_ACTIVE, - &tape->flags)) { - idetape_plug_pipeline(drive); - spin_lock_irqsave(&tape->lock, flags); - if (test_bit(IDETAPE_FLAG_PIPELINE_ACTIVE, &tape->flags)) - idetape_wait_for_request(drive, tape->active_data_rq); - spin_unlock_irqrestore(&tape->lock, flags); - } -} - -static void idetape_empty_write_pipeline(ide_drive_t *drive) +static void ide_tape_flush_merge_buffer(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; int blocks, min; struct idetape_bh *bh; if (tape->chrdev_dir != IDETAPE_DIR_WRITE) { - printk(KERN_ERR "ide-tape: bug: Trying to empty write pipeline," + printk(KERN_ERR "ide-tape: bug: Trying to empty merge buffer" " but we are not writing.\n"); return; } - if (tape->merge_stage_size > tape->stage_size) { + if (tape->merge_bh_size > tape->buffer_size) { printk(KERN_ERR "ide-tape: bug: merge_buffer too big\n"); - tape->merge_stage_size = tape->stage_size; + tape->merge_bh_size = tape->buffer_size; } - if (tape->merge_stage_size) { - blocks = tape->merge_stage_size / tape->blk_size; - if (tape->merge_stage_size % tape->blk_size) { + if (tape->merge_bh_size) { + blocks = tape->merge_bh_size / tape->blk_size; + if (tape->merge_bh_size % tape->blk_size) { unsigned int i; blocks++; - i = tape->blk_size - tape->merge_stage_size % + i = tape->blk_size - tape->merge_bh_size % tape->blk_size; bh = tape->bh->b_reqnext; while (bh) { @@ -2351,74 +1814,33 @@ static void idetape_empty_write_pipeline(ide_drive_t *drive) } } (void) idetape_add_chrdev_write_request(drive, blocks); - tape->merge_stage_size = 0; + tape->merge_bh_size = 0; } - idetape_wait_for_pipeline(drive); - if (tape->merge_stage != NULL) { - __idetape_kfree_stage(tape->merge_stage); - tape->merge_stage = NULL; + if (tape->merge_bh != NULL) { + ide_tape_kfree_buffer(tape); + tape->merge_bh = NULL; } - clear_bit(IDETAPE_FLAG_PIPELINE_ERR, &tape->flags); tape->chrdev_dir = IDETAPE_DIR_NONE; - - /* - * On the next backup, perform the feedback loop again. (I don't want to - * keep sense information between backups, as some systems are - * constantly on, and the system load can be totally different on the - * next backup). - */ - tape->max_stages = tape->min_pipeline; - if (tape->first_stage != NULL || - tape->next_stage != NULL || - tape->last_stage != NULL || - tape->nr_stages != 0) { - printk(KERN_ERR "ide-tape: ide-tape pipeline bug, " - "first_stage %p, next_stage %p, " - "last_stage %p, nr_stages %d\n", - tape->first_stage, tape->next_stage, - tape->last_stage, tape->nr_stages); - } } -static void idetape_restart_speed_control(ide_drive_t *drive) +static int idetape_init_read(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; - - tape->restart_speed_control_req = 0; - tape->pipeline_head = 0; - tape->controlled_last_pipeline_head = 0; - tape->controlled_previous_pipeline_head = 0; - tape->uncontrolled_previous_pipeline_head = 0; - tape->controlled_pipeline_head_speed = 5000; - tape->pipeline_head_speed = 5000; - tape->uncontrolled_pipeline_head_speed = 0; - tape->controlled_pipeline_head_time = - tape->uncontrolled_pipeline_head_time = jiffies; - tape->controlled_previous_head_time = - tape->uncontrolled_previous_head_time = jiffies; -} - -static int idetape_init_read(ide_drive_t *drive, int max_stages) -{ - idetape_tape_t *tape = drive->driver_data; - idetape_stage_t *new_stage; - struct request rq; int bytes_read; - u16 blocks = *(u16 *)&tape->caps[12]; /* Initialize read operation */ if (tape->chrdev_dir != IDETAPE_DIR_READ) { if (tape->chrdev_dir == IDETAPE_DIR_WRITE) { - idetape_empty_write_pipeline(drive); + ide_tape_flush_merge_buffer(drive); idetape_flush_tape_buffers(drive); } - if (tape->merge_stage || tape->merge_stage_size) { - printk(KERN_ERR "ide-tape: merge_stage_size should be" + if (tape->merge_bh || tape->merge_bh_size) { + printk(KERN_ERR "ide-tape: merge_bh_size should be" " 0 now\n"); - tape->merge_stage_size = 0; + tape->merge_bh_size = 0; } - tape->merge_stage = __idetape_kmalloc_stage(tape, 0, 0); - if (!tape->merge_stage) + tape->merge_bh = ide_tape_kmalloc_buffer(tape, 0, 0); + if (!tape->merge_bh) return -ENOMEM; tape->chrdev_dir = IDETAPE_DIR_READ; @@ -2431,54 +1853,23 @@ static int idetape_init_read(ide_drive_t *drive, int max_stages) if (drive->dsc_overlap) { bytes_read = idetape_queue_rw_tail(drive, REQ_IDETAPE_READ, 0, - tape->merge_stage->bh); + tape->merge_bh); if (bytes_read < 0) { - __idetape_kfree_stage(tape->merge_stage); - tape->merge_stage = NULL; + ide_tape_kfree_buffer(tape); + tape->merge_bh = NULL; tape->chrdev_dir = IDETAPE_DIR_NONE; return bytes_read; } } } - if (tape->restart_speed_control_req) - idetape_restart_speed_control(drive); - idetape_init_rq(&rq, REQ_IDETAPE_READ); - rq.sector = tape->first_frame; - rq.nr_sectors = blocks; - rq.current_nr_sectors = blocks; - if (!test_bit(IDETAPE_FLAG_PIPELINE_ERR, &tape->flags) && - tape->nr_stages < max_stages) { - new_stage = idetape_kmalloc_stage(tape); - while (new_stage != NULL) { - new_stage->rq = rq; - idetape_add_stage_tail(drive, new_stage); - if (tape->nr_stages >= max_stages) - break; - new_stage = idetape_kmalloc_stage(tape); - } - } - if (!test_bit(IDETAPE_FLAG_PIPELINE_ACTIVE, &tape->flags)) { - if (tape->nr_pending_stages >= 3 * max_stages / 4) { - tape->measure_insert_time = 1; - tape->insert_time = jiffies; - tape->insert_size = 0; - tape->insert_speed = 0; - idetape_plug_pipeline(drive); - } - } + return 0; } -/* - * Called from idetape_chrdev_read() to service a character device read request - * and add read-ahead requests to our pipeline. - */ +/* called from idetape_chrdev_read() to service a chrdev read request. */ static int idetape_add_chrdev_read_request(ide_drive_t *drive, int blocks) { idetape_tape_t *tape = drive->driver_data; - unsigned long flags; - struct request *rq_ptr; - int bytes_read; debug_log(DBG_PROCS, "Enter %s, %d blocks\n", __func__, blocks); @@ -2486,39 +1877,10 @@ static int idetape_add_chrdev_read_request(ide_drive_t *drive, int blocks) if (test_bit(IDETAPE_FLAG_FILEMARK, &tape->flags)) return 0; - /* Wait for the next block to reach the head of the pipeline. */ - idetape_init_read(drive, tape->max_stages); - if (tape->first_stage == NULL) { - if (test_bit(IDETAPE_FLAG_PIPELINE_ERR, &tape->flags)) - return 0; - return idetape_queue_rw_tail(drive, REQ_IDETAPE_READ, blocks, - tape->merge_stage->bh); - } - idetape_wait_first_stage(drive); - rq_ptr = &tape->first_stage->rq; - bytes_read = tape->blk_size * (rq_ptr->nr_sectors - - rq_ptr->current_nr_sectors); - rq_ptr->nr_sectors = 0; - rq_ptr->current_nr_sectors = 0; + idetape_init_read(drive); - if (rq_ptr->errors == IDETAPE_ERROR_EOD) - return 0; - else { - idetape_switch_buffers(tape, tape->first_stage); - if (rq_ptr->errors == IDETAPE_ERROR_FILEMARK) - set_bit(IDETAPE_FLAG_FILEMARK, &tape->flags); - spin_lock_irqsave(&tape->lock, flags); - idetape_remove_stage_head(drive); - spin_unlock_irqrestore(&tape->lock, flags); - tape->pipeline_head++; - idetape_calculate_speeds(drive); - } - if (bytes_read > blocks * tape->blk_size) { - printk(KERN_ERR "ide-tape: bug: trying to return more bytes" - " than requested\n"); - bytes_read = blocks * tape->blk_size; - } - return (bytes_read); + return idetape_queue_rw_tail(drive, REQ_IDETAPE_READ, blocks, + tape->merge_bh); } static void idetape_pad_zeros(ide_drive_t *drive, int bcount) @@ -2530,8 +1892,8 @@ static void idetape_pad_zeros(ide_drive_t *drive, int bcount) while (bcount) { unsigned int count; - bh = tape->merge_stage->bh; - count = min(tape->stage_size, bcount); + bh = tape->merge_bh; + count = min(tape->buffer_size, bcount); bcount -= count; blocks = count / tape->blk_size; while (count) { @@ -2542,29 +1904,8 @@ static void idetape_pad_zeros(ide_drive_t *drive, int bcount) bh = bh->b_reqnext; } idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, blocks, - tape->merge_stage->bh); - } -} - -static int idetape_pipeline_size(ide_drive_t *drive) -{ - idetape_tape_t *tape = drive->driver_data; - idetape_stage_t *stage; - struct request *rq; - int size = 0; - - idetape_wait_for_pipeline(drive); - stage = tape->first_stage; - while (stage != NULL) { - rq = &stage->rq; - size += tape->blk_size * (rq->nr_sectors - - rq->current_nr_sectors); - if (rq->errors == IDETAPE_ERROR_FILEMARK) - size += tape->blk_size; - stage = stage->next; + tape->merge_bh); } - size += tape->merge_stage_size; - return size; } /* @@ -2612,11 +1953,10 @@ static int idetape_blkdev_ioctl(ide_drive_t *drive, unsigned int cmd, if (copy_from_user(&config, argp, sizeof(config))) return -EFAULT; tape->best_dsc_rw_freq = config.dsc_rw_frequency; - tape->max_stages = config.nr_stages; break; case 0x0350: config.dsc_rw_frequency = (int) tape->best_dsc_rw_freq; - config.nr_stages = tape->max_stages; + config.nr_stages = 1; if (copy_to_user(argp, &config, sizeof(config))) return -EFAULT; break; @@ -2626,19 +1966,11 @@ static int idetape_blkdev_ioctl(ide_drive_t *drive, unsigned int cmd, return 0; } -/* - * The function below is now a bit more complicated than just passing the - * command to the tape since we may have crossed some filemarks during our - * pipelined read-ahead mode. As a minor side effect, the pipeline enables us to - * support MTFSFM when the filemark is in our internal pipeline even if the tape - * doesn't support spacing over filemarks in the reverse direction. - */ static int idetape_space_over_filemarks(ide_drive_t *drive, short mt_op, int mt_count) { idetape_tape_t *tape = drive->driver_data; struct ide_atapi_pc pc; - unsigned long flags; int retval, count = 0; int sprev = !!(tape->caps[4] & 0x20); @@ -2651,48 +1983,12 @@ static int idetape_space_over_filemarks(ide_drive_t *drive, short mt_op, } if (tape->chrdev_dir == IDETAPE_DIR_READ) { - /* its a read-ahead buffer, scan it for crossed filemarks. */ - tape->merge_stage_size = 0; + tape->merge_bh_size = 0; if (test_and_clear_bit(IDETAPE_FLAG_FILEMARK, &tape->flags)) ++count; - while (tape->first_stage != NULL) { - if (count == mt_count) { - if (mt_op == MTFSFM) - set_bit(IDETAPE_FLAG_FILEMARK, - &tape->flags); - return 0; - } - spin_lock_irqsave(&tape->lock, flags); - if (tape->first_stage == tape->active_stage) { - /* - * We have reached the active stage in the read - * pipeline. There is no point in allowing the - * drive to continue reading any farther, so we - * stop the pipeline. - * - * This section should be moved to a separate - * subroutine because similar operations are - * done in __idetape_discard_read_pipeline(), - * for example. - */ - tape->next_stage = NULL; - spin_unlock_irqrestore(&tape->lock, flags); - idetape_wait_first_stage(drive); - tape->next_stage = tape->first_stage->next; - } else - spin_unlock_irqrestore(&tape->lock, flags); - if (tape->first_stage->rq.errors == - IDETAPE_ERROR_FILEMARK) - ++count; - idetape_remove_stage_head(drive); - } - idetape_discard_read_pipeline(drive, 0); + ide_tape_discard_merge_buffer(drive, 0); } - /* - * The filemark was not found in our internal pipeline; now we can issue - * the space command. - */ switch (mt_op) { case MTFSF: case MTBSF: @@ -2748,27 +2044,25 @@ static ssize_t idetape_chrdev_read(struct file *file, char __user *buf, (count % tape->blk_size) == 0) tape->user_bs_factor = count / tape->blk_size; } - rc = idetape_init_read(drive, tape->max_stages); + rc = idetape_init_read(drive); if (rc < 0) return rc; if (count == 0) return (0); - if (tape->merge_stage_size) { - actually_read = min((unsigned int)(tape->merge_stage_size), + if (tape->merge_bh_size) { + actually_read = min((unsigned int)(tape->merge_bh_size), (unsigned int)count); - if (idetape_copy_stage_to_user(tape, buf, tape->merge_stage, - actually_read)) + if (idetape_copy_stage_to_user(tape, buf, actually_read)) ret = -EFAULT; buf += actually_read; - tape->merge_stage_size -= actually_read; + tape->merge_bh_size -= actually_read; count -= actually_read; } - while (count >= tape->stage_size) { + while (count >= tape->buffer_size) { bytes_read = idetape_add_chrdev_read_request(drive, ctl); if (bytes_read <= 0) goto finish; - if (idetape_copy_stage_to_user(tape, buf, tape->merge_stage, - bytes_read)) + if (idetape_copy_stage_to_user(tape, buf, bytes_read)) ret = -EFAULT; buf += bytes_read; count -= bytes_read; @@ -2779,11 +2073,10 @@ static ssize_t idetape_chrdev_read(struct file *file, char __user *buf, if (bytes_read <= 0) goto finish; temp = min((unsigned long)count, (unsigned long)bytes_read); - if (idetape_copy_stage_to_user(tape, buf, tape->merge_stage, - temp)) + if (idetape_copy_stage_to_user(tape, buf, temp)) ret = -EFAULT; actually_read += temp; - tape->merge_stage_size = bytes_read-temp; + tape->merge_bh_size = bytes_read-temp; } finish: if (!actually_read && test_bit(IDETAPE_FLAG_FILEMARK, &tape->flags)) { @@ -2814,17 +2107,17 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf, /* Initialize write operation */ if (tape->chrdev_dir != IDETAPE_DIR_WRITE) { if (tape->chrdev_dir == IDETAPE_DIR_READ) - idetape_discard_read_pipeline(drive, 1); - if (tape->merge_stage || tape->merge_stage_size) { - printk(KERN_ERR "ide-tape: merge_stage_size " + ide_tape_discard_merge_buffer(drive, 1); + if (tape->merge_bh || tape->merge_bh_size) { + printk(KERN_ERR "ide-tape: merge_bh_size " "should be 0 now\n"); - tape->merge_stage_size = 0; + tape->merge_bh_size = 0; } - tape->merge_stage = __idetape_kmalloc_stage(tape, 0, 0); - if (!tape->merge_stage) + tape->merge_bh = ide_tape_kmalloc_buffer(tape, 0, 0); + if (!tape->merge_bh) return -ENOMEM; tape->chrdev_dir = IDETAPE_DIR_WRITE; - idetape_init_merge_stage(tape); + idetape_init_merge_buffer(tape); /* * Issue a write 0 command to ensure that DSC handshake is @@ -2835,10 +2128,10 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf, if (drive->dsc_overlap) { ssize_t retval = idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, 0, - tape->merge_stage->bh); + tape->merge_bh); if (retval < 0) { - __idetape_kfree_stage(tape->merge_stage); - tape->merge_stage = NULL; + ide_tape_kfree_buffer(tape); + tape->merge_bh = NULL; tape->chrdev_dir = IDETAPE_DIR_NONE; return retval; } @@ -2846,49 +2139,44 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf, } if (count == 0) return (0); - if (tape->restart_speed_control_req) - idetape_restart_speed_control(drive); - if (tape->merge_stage_size) { - if (tape->merge_stage_size >= tape->stage_size) { + if (tape->merge_bh_size) { + if (tape->merge_bh_size >= tape->buffer_size) { printk(KERN_ERR "ide-tape: bug: merge buf too big\n"); - tape->merge_stage_size = 0; + tape->merge_bh_size = 0; } actually_written = min((unsigned int) - (tape->stage_size - tape->merge_stage_size), + (tape->buffer_size - tape->merge_bh_size), (unsigned int)count); - if (idetape_copy_stage_from_user(tape, tape->merge_stage, buf, - actually_written)) + if (idetape_copy_stage_from_user(tape, buf, actually_written)) ret = -EFAULT; buf += actually_written; - tape->merge_stage_size += actually_written; + tape->merge_bh_size += actually_written; count -= actually_written; - if (tape->merge_stage_size == tape->stage_size) { + if (tape->merge_bh_size == tape->buffer_size) { ssize_t retval; - tape->merge_stage_size = 0; + tape->merge_bh_size = 0; retval = idetape_add_chrdev_write_request(drive, ctl); if (retval <= 0) return (retval); } } - while (count >= tape->stage_size) { + while (count >= tape->buffer_size) { ssize_t retval; - if (idetape_copy_stage_from_user(tape, tape->merge_stage, buf, - tape->stage_size)) + if (idetape_copy_stage_from_user(tape, buf, tape->buffer_size)) ret = -EFAULT; - buf += tape->stage_size; - count -= tape->stage_size; + buf += tape->buffer_size; + count -= tape->buffer_size; retval = idetape_add_chrdev_write_request(drive, ctl); - actually_written += tape->stage_size; + actually_written += tape->buffer_size; if (retval <= 0) return (retval); } if (count) { actually_written += count; - if (idetape_copy_stage_from_user(tape, tape->merge_stage, buf, - count)) + if (idetape_copy_stage_from_user(tape, buf, count)) ret = -EFAULT; - tape->merge_stage_size += count; + tape->merge_bh_size += count; } return ret ? ret : actually_written; } @@ -2912,8 +2200,7 @@ static int idetape_write_filemark(ide_drive_t *drive) * * Note: MTBSF and MTBSFM are not supported when the tape doesn't support * spacing over filemarks in the reverse direction. In this case, MTFSFM is also - * usually not supported (it is supported in the rare case in which we crossed - * the filemark during our read-ahead pipelined operation mode). + * usually not supported. * * The following commands are currently not supported: * @@ -2929,7 +2216,6 @@ static int idetape_mtioctop(ide_drive_t *drive, short mt_op, int mt_count) debug_log(DBG_ERR, "Handling MTIOCTOP ioctl: mt_op=%d, mt_count=%d\n", mt_op, mt_count); - /* Commands which need our pipelined read-ahead stages. */ switch (mt_op) { case MTFSF: case MTFSFM: @@ -2946,7 +2232,7 @@ static int idetape_mtioctop(ide_drive_t *drive, short mt_op, int mt_count) case MTWEOF: if (tape->write_prot) return -EACCES; - idetape_discard_read_pipeline(drive, 1); + ide_tape_discard_merge_buffer(drive, 1); for (i = 0; i < mt_count; i++) { retval = idetape_write_filemark(drive); if (retval) @@ -2954,12 +2240,12 @@ static int idetape_mtioctop(ide_drive_t *drive, short mt_op, int mt_count) } return 0; case MTREW: - idetape_discard_read_pipeline(drive, 0); + ide_tape_discard_merge_buffer(drive, 0); if (idetape_rewind_tape(drive)) return -EIO; return 0; case MTLOAD: - idetape_discard_read_pipeline(drive, 0); + ide_tape_discard_merge_buffer(drive, 0); idetape_create_load_unload_cmd(drive, &pc, IDETAPE_LU_LOAD_MASK); return idetape_queue_pc_tail(drive, &pc); @@ -2974,7 +2260,7 @@ static int idetape_mtioctop(ide_drive_t *drive, short mt_op, int mt_count) if (!idetape_queue_pc_tail(drive, &pc)) tape->door_locked = DOOR_UNLOCKED; } - idetape_discard_read_pipeline(drive, 0); + ide_tape_discard_merge_buffer(drive, 0); idetape_create_load_unload_cmd(drive, &pc, !IDETAPE_LU_LOAD_MASK); retval = idetape_queue_pc_tail(drive, &pc); @@ -2982,10 +2268,10 @@ static int idetape_mtioctop(ide_drive_t *drive, short mt_op, int mt_count) clear_bit(IDETAPE_FLAG_MEDIUM_PRESENT, &tape->flags); return retval; case MTNOP: - idetape_discard_read_pipeline(drive, 0); + ide_tape_discard_merge_buffer(drive, 0); return idetape_flush_tape_buffers(drive); case MTRETEN: - idetape_discard_read_pipeline(drive, 0); + ide_tape_discard_merge_buffer(drive, 0); idetape_create_load_unload_cmd(drive, &pc, IDETAPE_LU_RETENSION_MASK | IDETAPE_LU_LOAD_MASK); return idetape_queue_pc_tail(drive, &pc); @@ -3007,11 +2293,11 @@ static int idetape_mtioctop(ide_drive_t *drive, short mt_op, int mt_count) set_bit(IDETAPE_FLAG_DETECT_BS, &tape->flags); return 0; case MTSEEK: - idetape_discard_read_pipeline(drive, 0); + ide_tape_discard_merge_buffer(drive, 0); return idetape_position_tape(drive, mt_count * tape->user_bs_factor, tape->partition, 0); case MTSETPART: - idetape_discard_read_pipeline(drive, 0); + ide_tape_discard_merge_buffer(drive, 0); return idetape_position_tape(drive, 0, mt_count, 0); case MTFSR: case MTBSR: @@ -3056,13 +2342,12 @@ static int idetape_chrdev_ioctl(struct inode *inode, struct file *file, debug_log(DBG_CHRDEV, "Enter %s, cmd=%u\n", __func__, cmd); - tape->restart_speed_control_req = 1; if (tape->chrdev_dir == IDETAPE_DIR_WRITE) { - idetape_empty_write_pipeline(drive); + ide_tape_flush_merge_buffer(drive); idetape_flush_tape_buffers(drive); } if (cmd == MTIOCGET || cmd == MTIOCPOS) { - block_offset = idetape_pipeline_size(drive) / + block_offset = tape->merge_bh_size / (tape->blk_size * tape->user_bs_factor); position = idetape_read_position(drive); if (position < 0) @@ -3094,7 +2379,7 @@ static int idetape_chrdev_ioctl(struct inode *inode, struct file *file, return 0; default: if (tape->chrdev_dir == IDETAPE_DIR_READ) - idetape_discard_read_pipeline(drive, 1); + ide_tape_discard_merge_buffer(drive, 1); return idetape_blkdev_ioctl(drive, cmd, arg); } } @@ -3168,9 +2453,6 @@ static int idetape_chrdev_open(struct inode *inode, struct file *filp) if (!test_bit(IDETAPE_FLAG_ADDRESS_VALID, &tape->flags)) (void)idetape_rewind_tape(drive); - if (tape->chrdev_dir != IDETAPE_DIR_READ) - clear_bit(IDETAPE_FLAG_PIPELINE_ERR, &tape->flags); - /* Read block size and write protect status from drive. */ ide_tape_get_bsize_from_bdesc(drive); @@ -3199,8 +2481,6 @@ static int idetape_chrdev_open(struct inode *inode, struct file *filp) } } } - idetape_restart_speed_control(drive); - tape->restart_speed_control_req = 0; return 0; out_put_tape: @@ -3212,13 +2492,13 @@ static void idetape_write_release(ide_drive_t *drive, unsigned int minor) { idetape_tape_t *tape = drive->driver_data; - idetape_empty_write_pipeline(drive); - tape->merge_stage = __idetape_kmalloc_stage(tape, 1, 0); - if (tape->merge_stage != NULL) { + ide_tape_flush_merge_buffer(drive); + tape->merge_bh = ide_tape_kmalloc_buffer(tape, 1, 0); + if (tape->merge_bh != NULL) { idetape_pad_zeros(drive, tape->blk_size * (tape->user_bs_factor - 1)); - __idetape_kfree_stage(tape->merge_stage); - tape->merge_stage = NULL; + ide_tape_kfree_buffer(tape); + tape->merge_bh = NULL; } idetape_write_filemark(drive); idetape_flush_tape_buffers(drive); @@ -3241,14 +2521,9 @@ static int idetape_chrdev_release(struct inode *inode, struct file *filp) idetape_write_release(drive, minor); if (tape->chrdev_dir == IDETAPE_DIR_READ) { if (minor < 128) - idetape_discard_read_pipeline(drive, 1); - else - idetape_wait_for_pipeline(drive); - } - if (tape->cache_stage != NULL) { - __idetape_kfree_stage(tape->cache_stage); - tape->cache_stage = NULL; + ide_tape_discard_merge_buffer(drive, 1); } + if (minor < 128 && test_bit(IDETAPE_FLAG_MEDIUM_PRESENT, &tape->flags)) (void) idetape_rewind_tape(drive); if (tape->chrdev_dir == IDETAPE_DIR_NONE) { @@ -3385,33 +2660,15 @@ static void idetape_add_settings(ide_drive_t *drive) ide_add_setting(drive, "buffer", SETTING_READ, TYPE_SHORT, 0, 0xffff, 1, 2, (u16 *)&tape->caps[16], NULL); - ide_add_setting(drive, "pipeline_min", SETTING_RW, TYPE_INT, 1, 0xffff, - tape->stage_size / 1024, 1, &tape->min_pipeline, NULL); - ide_add_setting(drive, "pipeline", SETTING_RW, TYPE_INT, 1, 0xffff, - tape->stage_size / 1024, 1, &tape->max_stages, NULL); - ide_add_setting(drive, "pipeline_max", SETTING_RW, TYPE_INT, 1, 0xffff, - tape->stage_size / 1024, 1, &tape->max_pipeline, NULL); - ide_add_setting(drive, "pipeline_used", SETTING_READ, TYPE_INT, 0, - 0xffff, tape->stage_size / 1024, 1, &tape->nr_stages, - NULL); - ide_add_setting(drive, "pipeline_pending", SETTING_READ, TYPE_INT, 0, - 0xffff, tape->stage_size / 1024, 1, - &tape->nr_pending_stages, NULL); ide_add_setting(drive, "speed", SETTING_READ, TYPE_SHORT, 0, 0xffff, 1, 1, (u16 *)&tape->caps[14], NULL); - ide_add_setting(drive, "stage", SETTING_READ, TYPE_INT, 0, 0xffff, 1, - 1024, &tape->stage_size, NULL); + ide_add_setting(drive, "buffer_size", SETTING_READ, TYPE_INT, 0, 0xffff, + 1, 1024, &tape->buffer_size, NULL); ide_add_setting(drive, "tdsc", SETTING_RW, TYPE_INT, IDETAPE_DSC_RW_MIN, IDETAPE_DSC_RW_MAX, 1000, HZ, &tape->best_dsc_rw_freq, NULL); ide_add_setting(drive, "dsc_overlap", SETTING_RW, TYPE_BYTE, 0, 1, 1, 1, &drive->dsc_overlap, NULL); - ide_add_setting(drive, "pipeline_head_speed_c", SETTING_READ, TYPE_INT, - 0, 0xffff, 1, 1, &tape->controlled_pipeline_head_speed, - NULL); - ide_add_setting(drive, "pipeline_head_speed_u", SETTING_READ, TYPE_INT, - 0, 0xffff, 1, 1, - &tape->uncontrolled_pipeline_head_speed, NULL); ide_add_setting(drive, "avg_speed", SETTING_READ, TYPE_INT, 0, 0xffff, 1, 1, &tape->avg_speed, NULL); ide_add_setting(drive, "debug_mask", SETTING_RW, TYPE_INT, 0, 0xffff, 1, @@ -3434,11 +2691,10 @@ static inline void idetape_add_settings(ide_drive_t *drive) { ; } */ static void idetape_setup(ide_drive_t *drive, idetape_tape_t *tape, int minor) { - unsigned long t1, tmid, tn, t; + unsigned long t; int speed; - int stage_size; + int buffer_size; u8 gcw[2]; - struct sysinfo si; u16 *ctl = (u16 *)&tape->caps[12]; spin_lock_init(&tape->lock); @@ -3457,65 +2713,33 @@ static void idetape_setup(ide_drive_t *drive, idetape_tape_t *tape, int minor) tape->name[2] = '0' + minor; tape->chrdev_dir = IDETAPE_DIR_NONE; tape->pc = tape->pc_stack; - tape->max_insert_speed = 10000; - tape->speed_control = 1; *((unsigned short *) &gcw) = drive->id->config; /* Command packet DRQ type */ if (((gcw[0] & 0x60) >> 5) == 1) set_bit(IDETAPE_FLAG_DRQ_INTERRUPT, &tape->flags); - tape->min_pipeline = 10; - tape->max_pipeline = 10; - tape->max_stages = 10; - idetape_get_inquiry_results(drive); idetape_get_mode_sense_results(drive); ide_tape_get_bsize_from_bdesc(drive); tape->user_bs_factor = 1; - tape->stage_size = *ctl * tape->blk_size; - while (tape->stage_size > 0xffff) { + tape->buffer_size = *ctl * tape->blk_size; + while (tape->buffer_size > 0xffff) { printk(KERN_NOTICE "ide-tape: decreasing stage size\n"); *ctl /= 2; - tape->stage_size = *ctl * tape->blk_size; + tape->buffer_size = *ctl * tape->blk_size; } - stage_size = tape->stage_size; - tape->pages_per_stage = stage_size / PAGE_SIZE; - if (stage_size % PAGE_SIZE) { - tape->pages_per_stage++; - tape->excess_bh_size = PAGE_SIZE - stage_size % PAGE_SIZE; + buffer_size = tape->buffer_size; + tape->pages_per_buffer = buffer_size / PAGE_SIZE; + if (buffer_size % PAGE_SIZE) { + tape->pages_per_buffer++; + tape->excess_bh_size = PAGE_SIZE - buffer_size % PAGE_SIZE; } - /* Select the "best" DSC read/write polling freq and pipeline size. */ + /* select the "best" DSC read/write polling freq */ speed = max(*(u16 *)&tape->caps[14], *(u16 *)&tape->caps[8]); - tape->max_stages = speed * 1000 * 10 / tape->stage_size; - - /* Limit memory use for pipeline to 10% of physical memory */ - si_meminfo(&si); - if (tape->max_stages * tape->stage_size > - si.totalram * si.mem_unit / 10) - tape->max_stages = - si.totalram * si.mem_unit / (10 * tape->stage_size); - - tape->max_stages = min(tape->max_stages, IDETAPE_MAX_PIPELINE_STAGES); - tape->min_pipeline = min(tape->max_stages, IDETAPE_MIN_PIPELINE_STAGES); - tape->max_pipeline = - min(tape->max_stages * 2, IDETAPE_MAX_PIPELINE_STAGES); - if (tape->max_stages == 0) { - tape->max_stages = 1; - tape->min_pipeline = 1; - tape->max_pipeline = 1; - } - - t1 = (tape->stage_size * HZ) / (speed * 1000); - tmid = (*(u16 *)&tape->caps[16] * 32 * HZ) / (speed * 125); - tn = (IDETAPE_FIFO_THRESHOLD * tape->stage_size * HZ) / (speed * 1000); - - if (tape->max_stages) - t = tn; - else - t = t1; + t = (IDETAPE_FIFO_THRESHOLD * tape->buffer_size * HZ) / (speed * 1000); /* * Ensure that the number we got makes sense; limit it within @@ -3525,11 +2749,10 @@ static void idetape_setup(ide_drive_t *drive, idetape_tape_t *tape, int minor) min_t(unsigned long, t, IDETAPE_DSC_RW_MAX), IDETAPE_DSC_RW_MIN); printk(KERN_INFO "ide-tape: %s <-> %s: %dKBps, %d*%dkB buffer, " - "%dkB pipeline, %lums tDSC%s\n", + "%lums tDSC%s\n", drive->name, tape->name, *(u16 *)&tape->caps[14], - (*(u16 *)&tape->caps[16] * 512) / tape->stage_size, - tape->stage_size / 1024, - tape->max_stages * tape->stage_size / 1024, + (*(u16 *)&tape->caps[16] * 512) / tape->buffer_size, + tape->buffer_size / 1024, tape->best_dsc_rw_freq * 1000 / HZ, drive->using_dma ? ", DMA":""); @@ -3553,7 +2776,7 @@ static void ide_tape_release(struct kref *kref) ide_drive_t *drive = tape->drive; struct gendisk *g = tape->disk; - BUG_ON(tape->first_stage != NULL || tape->merge_stage_size); + BUG_ON(tape->merge_bh_size); drive->dsc_overlap = 0; drive->driver_data = NULL; diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c index a317ca9c46e..9f9ad9fb6b8 100644 --- a/drivers/ide/ide-taskfile.c +++ b/drivers/ide/ide-taskfile.c @@ -36,6 +36,7 @@ void ide_tf_load(ide_drive_t *drive, ide_task_t *task) { ide_hwif_t *hwif = drive->hwif; + struct ide_io_ports *io_ports = &hwif->io_ports; struct ide_taskfile *tf = &task->tf; u8 HIHI = (task->tf_flags & IDE_TFLAG_LBA48) ? 0xE0 : 0xEF; @@ -59,34 +60,33 @@ void ide_tf_load(ide_drive_t *drive, ide_task_t *task) SELECT_MASK(drive, 0); if (task->tf_flags & IDE_TFLAG_OUT_DATA) - hwif->OUTW((tf->hob_data << 8) | tf->data, - hwif->io_ports[IDE_DATA_OFFSET]); + hwif->OUTW((tf->hob_data << 8) | tf->data, io_ports->data_addr); if (task->tf_flags & IDE_TFLAG_OUT_HOB_FEATURE) - hwif->OUTB(tf->hob_feature, hwif->io_ports[IDE_FEATURE_OFFSET]); + hwif->OUTB(tf->hob_feature, io_ports->feature_addr); if (task->tf_flags & IDE_TFLAG_OUT_HOB_NSECT) - hwif->OUTB(tf->hob_nsect, hwif->io_ports[IDE_NSECTOR_OFFSET]); + hwif->OUTB(tf->hob_nsect, io_ports->nsect_addr); if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAL) - hwif->OUTB(tf->hob_lbal, hwif->io_ports[IDE_SECTOR_OFFSET]); + hwif->OUTB(tf->hob_lbal, io_ports->lbal_addr); if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAM) - hwif->OUTB(tf->hob_lbam, hwif->io_ports[IDE_LCYL_OFFSET]); + hwif->OUTB(tf->hob_lbam, io_ports->lbam_addr); if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAH) - hwif->OUTB(tf->hob_lbah, hwif->io_ports[IDE_HCYL_OFFSET]); + hwif->OUTB(tf->hob_lbah, io_ports->lbah_addr); if (task->tf_flags & IDE_TFLAG_OUT_FEATURE) - hwif->OUTB(tf->feature, hwif->io_ports[IDE_FEATURE_OFFSET]); + hwif->OUTB(tf->feature, io_ports->feature_addr); if (task->tf_flags & IDE_TFLAG_OUT_NSECT) - hwif->OUTB(tf->nsect, hwif->io_ports[IDE_NSECTOR_OFFSET]); + hwif->OUTB(tf->nsect, io_ports->nsect_addr); if (task->tf_flags & IDE_TFLAG_OUT_LBAL) - hwif->OUTB(tf->lbal, hwif->io_ports[IDE_SECTOR_OFFSET]); + hwif->OUTB(tf->lbal, io_ports->lbal_addr); if (task->tf_flags & IDE_TFLAG_OUT_LBAM) - hwif->OUTB(tf->lbam, hwif->io_ports[IDE_LCYL_OFFSET]); + hwif->OUTB(tf->lbam, io_ports->lbam_addr); if (task->tf_flags & IDE_TFLAG_OUT_LBAH) - hwif->OUTB(tf->lbah, hwif->io_ports[IDE_HCYL_OFFSET]); + hwif->OUTB(tf->lbah, io_ports->lbah_addr); if (task->tf_flags & IDE_TFLAG_OUT_DEVICE) hwif->OUTB((tf->device & HIHI) | drive->select.all, - hwif->io_ports[IDE_SELECT_OFFSET]); + io_ports->device_addr); } int taskfile_lib_get_identify (ide_drive_t *drive, u8 *buf) @@ -155,8 +155,7 @@ ide_startstop_t do_rw_taskfile (ide_drive_t *drive, ide_task_t *task) switch (task->data_phase) { case TASKFILE_MULTI_OUT: case TASKFILE_OUT: - hwif->OUTBSYNC(drive, tf->command, - hwif->io_ports[IDE_COMMAND_OFFSET]); + hwif->OUTBSYNC(drive, tf->command, hwif->io_ports.command_addr); ndelay(400); /* FIXME */ return pre_task_out_intr(drive, task->rq); case TASKFILE_MULTI_IN: diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index bced02f9f2c..999584c03d9 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -94,12 +94,6 @@ DEFINE_MUTEX(ide_cfg_mtx); int noautodma = 0; -#ifdef CONFIG_BLK_DEV_IDEACPI -int ide_noacpi = 0; -int ide_noacpitfs = 1; -int ide_noacpionboot = 1; -#endif - ide_hwif_t ide_hwifs[MAX_HWIFS]; /* master data repository */ static void ide_port_init_devices_data(ide_hwif_t *); @@ -293,7 +287,7 @@ EXPORT_SYMBOL_GPL(ide_port_unregister_devices); /** * ide_unregister - free an IDE interface - * @index: index of interface (will change soon to a pointer) + * @hwif: IDE interface * * Perform the final unregister of an IDE interface. At the moment * we don't refcount interfaces so this will also get split up. @@ -313,19 +307,16 @@ EXPORT_SYMBOL_GPL(ide_port_unregister_devices); * This is raving bonkers. */ -void ide_unregister(unsigned int index) +void ide_unregister(ide_hwif_t *hwif) { - ide_hwif_t *hwif, *g; + ide_hwif_t *g; ide_hwgroup_t *hwgroup; int irq_count = 0; - BUG_ON(index >= MAX_HWIFS); - BUG_ON(in_interrupt()); BUG_ON(irqs_disabled()); mutex_lock(&ide_cfg_mtx); spin_lock_irq(&ide_lock); - hwif = &ide_hwifs[index]; if (!hwif->present) goto abort; __ide_port_unregister_devices(hwif); @@ -366,7 +357,7 @@ void ide_unregister(unsigned int index) ide_release_dma_engine(hwif); /* restore hwif data to pristine status */ - ide_init_port_data(hwif, index); + ide_init_port_data(hwif, hwif->index); abort: spin_unlock_irq(&ide_lock); @@ -377,7 +368,7 @@ EXPORT_SYMBOL(ide_unregister); void ide_init_port_hw(ide_hwif_t *hwif, hw_regs_t *hw) { - memcpy(hwif->io_ports, hw->io_ports, sizeof(hwif->io_ports)); + memcpy(&hwif->io_ports, &hw->io_ports, sizeof(hwif->io_ports)); hwif->irq = hw->irq; hwif->chipset = hw->chipset; hwif->gendev.parent = hw->dev; @@ -837,16 +828,6 @@ static int __init match_parm (char *s, const char *keywords[], int vals[], int m return 0; /* zero = nothing matched */ } -extern int probe_ali14xx; -extern int probe_umc8672; -extern int probe_dtc2278; -extern int probe_ht6560b; -extern int probe_qd65xx; -extern int cmd640_vlb; -extern int probe_4drives; - -static int __initdata is_chipset_set; - /* * ide_setup() gets called VERY EARLY during initialization, * to handle kernel "command line" strings beginning with "hdx=" or "ide". @@ -855,14 +836,12 @@ static int __initdata is_chipset_set; */ static int __init ide_setup(char *s) { - int i, vals[3]; ide_hwif_t *hwif; ide_drive_t *drive; unsigned int hw, unit; + int vals[3]; const char max_drive = 'a' + ((MAX_HWIFS * MAX_DRIVES) - 1); - const char max_hwif = '0' + (MAX_HWIFS - 1); - if (strncmp(s,"hd",2) == 0 && s[2] == '=') /* hd= is for hd.c */ return 0; /* driver and not us */ @@ -878,7 +857,7 @@ static int __init ide_setup(char *s) printk(" : Enabled support for IDE doublers\n"); ide_doubler = 1; - return 1; + goto obsolete_option; } #endif /* CONFIG_BLK_DEV_IDEDOUBLER */ @@ -892,17 +871,17 @@ static int __init ide_setup(char *s) if (!strcmp(s, "ide=noacpi")) { //printk(" : Disable IDE ACPI support.\n"); ide_noacpi = 1; - return 1; + goto obsolete_option; } if (!strcmp(s, "ide=acpigtf")) { //printk(" : Enable IDE ACPI _GTF support.\n"); - ide_noacpitfs = 0; - return 1; + ide_acpigtf = 1; + goto obsolete_option; } if (!strcmp(s, "ide=acpionboot")) { //printk(" : Call IDE ACPI methods on boot.\n"); - ide_noacpionboot = 0; - return 1; + ide_acpionboot = 1; + goto obsolete_option; } #endif /* CONFIG_BLK_DEV_IDEACPI */ @@ -912,7 +891,7 @@ static int __init ide_setup(char *s) if (s[0] == 'h' && s[1] == 'd' && s[2] >= 'a' && s[2] <= max_drive) { const char *hd_words[] = { "none", "noprobe", "nowerr", "cdrom", "nodma", - "autotune", "noautotune", "-8", "-9", "-10", + "-6", "-7", "-8", "-9", "-10", "noflush", "remap", "remap63", "scsi", NULL }; unit = s[2] - 'a'; hw = unit / MAX_DRIVES; @@ -927,28 +906,22 @@ static int __init ide_setup(char *s) case -1: /* "none" */ case -2: /* "noprobe" */ drive->noprobe = 1; - goto done; + goto obsolete_option; case -3: /* "nowerr" */ drive->bad_wstat = BAD_R_STAT; - goto done; + goto obsolete_option; case -4: /* "cdrom" */ drive->present = 1; drive->media = ide_cdrom; /* an ATAPI device ignores DRDY */ drive->ready_stat = 0; - goto done; + goto obsolete_option; case -5: /* nodma */ drive->nodma = 1; - goto done; - case -6: /* "autotune" */ - drive->autotune = IDE_TUNE_AUTO; - goto obsolete_option; - case -7: /* "noautotune" */ - drive->autotune = IDE_TUNE_NOAUTO; goto obsolete_option; case -11: /* noflush */ drive->noflush = 1; - goto done; + goto obsolete_option; case -12: /* "remap" */ drive->remap_0_to_1 = 1; goto obsolete_option; @@ -966,7 +939,7 @@ static int __init ide_setup(char *s) drive->sect = drive->bios_sect = vals[2]; drive->present = 1; drive->forced_geom = 1; - goto done; + goto obsolete_option; default: goto bad_option; } @@ -984,126 +957,15 @@ static int __init ide_setup(char *s) idebus_parameter = vals[0]; } else printk(" -- BAD BUS SPEED! Expected value from 20 to 66"); - goto done; + goto obsolete_option; } - /* - * Look for interface options: "idex=" - */ - if (s[3] >= '0' && s[3] <= max_hwif) { - /* - * Be VERY CAREFUL changing this: note hardcoded indexes below - * (-8, -9, -10) are reserved to ease the hardcoding. - */ - static const char *ide_words[] = { - "minus1", "serialize", "minus3", "minus4", - "reset", "minus6", "ata66", "minus8", "minus9", - "minus10", "four", "qd65xx", "ht6560b", "cmd640_vlb", - "dtc2278", "umc8672", "ali14xx", NULL }; - - hw = s[3] - '0'; - hwif = &ide_hwifs[hw]; - i = match_parm(&s[4], ide_words, vals, 3); - - /* - * Cryptic check to ensure chipset not already set for hwif. - * Note: we can't depend on hwif->chipset here. - */ - if (i >= -18 && i <= -11) { - /* chipset already specified */ - if (is_chipset_set) - goto bad_option; - /* these drivers are for "ide0=" only */ - if (hw != 0) - goto bad_hwif; - is_chipset_set = 1; - printk("\n"); - } - - switch (i) { -#ifdef CONFIG_BLK_DEV_ALI14XX - case -17: /* "ali14xx" */ - probe_ali14xx = 1; - goto obsolete_option; -#endif -#ifdef CONFIG_BLK_DEV_UMC8672 - case -16: /* "umc8672" */ - probe_umc8672 = 1; - goto obsolete_option; -#endif -#ifdef CONFIG_BLK_DEV_DTC2278 - case -15: /* "dtc2278" */ - probe_dtc2278 = 1; - goto obsolete_option; -#endif -#ifdef CONFIG_BLK_DEV_CMD640 - case -14: /* "cmd640_vlb" */ - cmd640_vlb = 1; - goto obsolete_option; -#endif -#ifdef CONFIG_BLK_DEV_HT6560B - case -13: /* "ht6560b" */ - probe_ht6560b = 1; - goto obsolete_option; -#endif -#ifdef CONFIG_BLK_DEV_QD65XX - case -12: /* "qd65xx" */ - probe_qd65xx = 1; - goto obsolete_option; -#endif -#ifdef CONFIG_BLK_DEV_4DRIVES - case -11: /* "four" drives on one set of ports */ - probe_4drives = 1; - goto obsolete_option; -#endif - case -10: /* minus10 */ - case -9: /* minus9 */ - case -8: /* minus8 */ - case -6: - case -4: - case -3: - goto bad_option; - case -7: /* ata66 */ -#ifdef CONFIG_BLK_DEV_IDEPCI - /* - * Use ATA_CBL_PATA40_SHORT so drive side - * cable detection is also overriden. - */ - hwif->cbl = ATA_CBL_PATA40_SHORT; - goto obsolete_option; -#else - goto bad_hwif; -#endif - case -5: /* "reset" */ - hwif->reset = 1; - goto obsolete_option; - case -2: /* "serialize" */ - hwif->mate = &ide_hwifs[hw^1]; - hwif->mate->mate = hwif; - hwif->serialized = hwif->mate->serialized = 1; - goto obsolete_option; - case -1: - case 0: - case 1: - case 2: - case 3: - goto bad_option; - default: - printk(" -- SUPPORT NOT CONFIGURED IN THIS KERNEL\n"); - return 1; - } - } bad_option: printk(" -- BAD OPTION\n"); return 1; obsolete_option: printk(" -- OBSOLETE OPTION, WILL BE REMOVED SOON!\n"); return 1; -bad_hwif: - printk("-- NOT SUPPORTED ON ide%d", hw); -done: - printk("\n"); - return 1; } EXPORT_SYMBOL(ide_lock); @@ -1239,6 +1101,185 @@ static void ide_port_class_release(struct device *portdev) put_device(&hwif->gendev); } +int ide_vlb_clk; +EXPORT_SYMBOL_GPL(ide_vlb_clk); + +module_param_named(vlb_clock, ide_vlb_clk, int, 0); +MODULE_PARM_DESC(vlb_clock, "VLB clock frequency (in MHz)"); + +int ide_pci_clk; +EXPORT_SYMBOL_GPL(ide_pci_clk); + +module_param_named(pci_clock, ide_pci_clk, int, 0); +MODULE_PARM_DESC(pci_clock, "PCI bus clock frequency (in MHz)"); + +static int ide_set_dev_param_mask(const char *s, struct kernel_param *kp) +{ + int a, b, i, j = 1; + unsigned int *dev_param_mask = (unsigned int *)kp->arg; + + if (sscanf(s, "%d.%d:%d", &a, &b, &j) != 3 && + sscanf(s, "%d.%d", &a, &b) != 2) + return -EINVAL; + + i = a * MAX_DRIVES + b; + + if (i >= MAX_HWIFS * MAX_DRIVES || j < 0 || j > 1) + return -EINVAL; + + if (j) + *dev_param_mask |= (1 << i); + else + *dev_param_mask &= (1 << i); + + return 0; +} + +static unsigned int ide_nodma; + +module_param_call(nodma, ide_set_dev_param_mask, NULL, &ide_nodma, 0); +MODULE_PARM_DESC(nodma, "disallow DMA for a device"); + +static unsigned int ide_noflush; + +module_param_call(noflush, ide_set_dev_param_mask, NULL, &ide_noflush, 0); +MODULE_PARM_DESC(noflush, "disable flush requests for a device"); + +static unsigned int ide_noprobe; + +module_param_call(noprobe, ide_set_dev_param_mask, NULL, &ide_noprobe, 0); +MODULE_PARM_DESC(noprobe, "skip probing for a device"); + +static unsigned int ide_nowerr; + +module_param_call(nowerr, ide_set_dev_param_mask, NULL, &ide_nowerr, 0); +MODULE_PARM_DESC(nowerr, "ignore the WRERR_STAT bit for a device"); + +static unsigned int ide_cdroms; + +module_param_call(cdrom, ide_set_dev_param_mask, NULL, &ide_cdroms, 0); +MODULE_PARM_DESC(cdrom, "force device as a CD-ROM"); + +struct chs_geom { + unsigned int cyl; + u8 head; + u8 sect; +}; + +static unsigned int ide_disks; +static struct chs_geom ide_disks_chs[MAX_HWIFS * MAX_DRIVES]; + +static int ide_set_disk_chs(const char *str, struct kernel_param *kp) +{ + int a, b, c = 0, h = 0, s = 0, i, j = 1; + + if (sscanf(str, "%d.%d:%d,%d,%d", &a, &b, &c, &h, &s) != 5 && + sscanf(str, "%d.%d:%d", &a, &b, &j) != 3) + return -EINVAL; + + i = a * MAX_DRIVES + b; + + if (i >= MAX_HWIFS * MAX_DRIVES || j < 0 || j > 1) + return -EINVAL; + + if (c > INT_MAX || h > 255 || s > 255) + return -EINVAL; + + if (j) + ide_disks |= (1 << i); + else + ide_disks &= (1 << i); + + ide_disks_chs[i].cyl = c; + ide_disks_chs[i].head = h; + ide_disks_chs[i].sect = s; + + return 0; +} + +module_param_call(chs, ide_set_disk_chs, NULL, NULL, 0); +MODULE_PARM_DESC(chs, "force device as a disk (using CHS)"); + +static void ide_dev_apply_params(ide_drive_t *drive) +{ + int i = drive->hwif->index * MAX_DRIVES + drive->select.b.unit; + + if (ide_nodma & (1 << i)) { + printk(KERN_INFO "ide: disallowing DMA for %s\n", drive->name); + drive->nodma = 1; + } + if (ide_noflush & (1 << i)) { + printk(KERN_INFO "ide: disabling flush requests for %s\n", + drive->name); + drive->noflush = 1; + } + if (ide_noprobe & (1 << i)) { + printk(KERN_INFO "ide: skipping probe for %s\n", drive->name); + drive->noprobe = 1; + } + if (ide_nowerr & (1 << i)) { + printk(KERN_INFO "ide: ignoring the WRERR_STAT bit for %s\n", + drive->name); + drive->bad_wstat = BAD_R_STAT; + } + if (ide_cdroms & (1 << i)) { + printk(KERN_INFO "ide: forcing %s as a CD-ROM\n", drive->name); + drive->present = 1; + drive->media = ide_cdrom; + /* an ATAPI device ignores DRDY */ + drive->ready_stat = 0; + } + if (ide_disks & (1 << i)) { + drive->cyl = drive->bios_cyl = ide_disks_chs[i].cyl; + drive->head = drive->bios_head = ide_disks_chs[i].head; + drive->sect = drive->bios_sect = ide_disks_chs[i].sect; + drive->forced_geom = 1; + printk(KERN_INFO "ide: forcing %s as a disk (%d/%d/%d)\n", + drive->name, + drive->cyl, drive->head, drive->sect); + drive->present = 1; + drive->media = ide_disk; + drive->ready_stat = READY_STAT; + } +} + +static unsigned int ide_ignore_cable; + +static int ide_set_ignore_cable(const char *s, struct kernel_param *kp) +{ + int i, j = 1; + + if (sscanf(s, "%d:%d", &i, &j) != 2 && sscanf(s, "%d", &i) != 1) + return -EINVAL; + + if (i >= MAX_HWIFS || j < 0 || j > 1) + return -EINVAL; + + if (j) + ide_ignore_cable |= (1 << i); + else + ide_ignore_cable &= (1 << i); + + return 0; +} + +module_param_call(ignore_cable, ide_set_ignore_cable, NULL, NULL, 0); +MODULE_PARM_DESC(ignore_cable, "ignore cable detection"); + +void ide_port_apply_params(ide_hwif_t *hwif) +{ + int i; + + if (ide_ignore_cable & (1 << hwif->index)) { + printk(KERN_INFO "ide: ignoring cable detection for %s\n", + hwif->name); + hwif->cbl = ATA_CBL_PATA40_SHORT; + } + + for (i = 0; i < MAX_DRIVES; i++) + ide_dev_apply_params(&hwif->drives[i]); +} + /* * This is gets invoked once during initialization, to set *everything* up */ @@ -1305,11 +1346,6 @@ int __init init_module (void) void __exit cleanup_module (void) { - int index; - - for (index = 0; index < MAX_HWIFS; ++index) - ide_unregister(index); - proc_ide_destroy(); class_destroy(ide_port_class); diff --git a/drivers/ide/legacy/ali14xx.c b/drivers/ide/legacy/ali14xx.c index 6efbf947c6d..90c65cf9744 100644 --- a/drivers/ide/legacy/ali14xx.c +++ b/drivers/ide/legacy/ali14xx.c @@ -116,7 +116,7 @@ static void ali14xx_set_pio_mode(ide_drive_t *drive, const u8 pio) int time1, time2; u8 param1, param2, param3, param4; unsigned long flags; - int bus_speed = system_bus_clock(); + int bus_speed = ide_vlb_clk ? ide_vlb_clk : system_bus_clock(); /* calculate timing, according to PIO mode */ time1 = ide_pio_cycle_time(drive, pio); @@ -202,7 +202,7 @@ static const struct ide_port_info ali14xx_port_info = { .name = DRV_NAME, .chipset = ide_ali14xx, .port_ops = &ali14xx_port_ops, - .host_flags = IDE_HFLAG_NO_DMA | IDE_HFLAG_NO_AUTOTUNE, + .host_flags = IDE_HFLAG_NO_DMA, .pio_mask = ATA_PIO4, }; @@ -220,7 +220,7 @@ static int __init ali14xx_probe(void) return ide_legacy_device_add(&ali14xx_port_info, 0); } -int probe_ali14xx; +static int probe_ali14xx; module_param_named(probe, probe_ali14xx, bool, 0); MODULE_PARM_DESC(probe, "probe for ALI M14xx chipsets"); diff --git a/drivers/ide/legacy/buddha.c b/drivers/ide/legacy/buddha.c index f51433bce8e..5c730e4dd73 100644 --- a/drivers/ide/legacy/buddha.c +++ b/drivers/ide/legacy/buddha.c @@ -102,7 +102,7 @@ static int buddha_ack_intr(ide_hwif_t *hwif) { unsigned char ch; - ch = z_readb(hwif->io_ports[IDE_IRQ_OFFSET]); + ch = z_readb(hwif->io_ports.irq_addr); if (!(ch & 0x80)) return 0; return 1; @@ -112,9 +112,9 @@ static int xsurf_ack_intr(ide_hwif_t *hwif) { unsigned char ch; - ch = z_readb(hwif->io_ports[IDE_IRQ_OFFSET]); + ch = z_readb(hwif->io_ports.irq_addr); /* X-Surf needs a 0 written to IRQ register to ensure ISA bit A11 stays at 0 */ - z_writeb(0, hwif->io_ports[IDE_IRQ_OFFSET]); + z_writeb(0, hwif->io_ports.irq_addr); if (!(ch & 0x80)) return 0; return 1; @@ -128,13 +128,13 @@ static void __init buddha_setup_ports(hw_regs_t *hw, unsigned long base, memset(hw, 0, sizeof(*hw)); - hw->io_ports[IDE_DATA_OFFSET] = base; + hw->io_ports.data_addr = base; for (i = 1; i < 8; i++) - hw->io_ports[i] = base + 2 + i * 4; + hw->io_ports_array[i] = base + 2 + i * 4; - hw->io_ports[IDE_CONTROL_OFFSET] = ctl; - hw->io_ports[IDE_IRQ_OFFSET] = irq_port; + hw->io_ports.ctl_addr = ctl; + hw->io_ports.irq_addr = irq_port; hw->irq = IRQ_AMIGA_PORTS; hw->ack_intr = ack_intr; diff --git a/drivers/ide/legacy/dtc2278.c b/drivers/ide/legacy/dtc2278.c index f7c4ad1c57c..af791a02a12 100644 --- a/drivers/ide/legacy/dtc2278.c +++ b/drivers/ide/legacy/dtc2278.c @@ -101,8 +101,7 @@ static const struct ide_port_info dtc2278_port_info __initdata = { IDE_HFLAG_IO_32BIT | /* disallow ->io_32bit changes */ IDE_HFLAG_NO_IO_32BIT | - IDE_HFLAG_NO_DMA | - IDE_HFLAG_NO_AUTOTUNE, + IDE_HFLAG_NO_DMA, .pio_mask = ATA_PIO4, }; @@ -131,7 +130,7 @@ static int __init dtc2278_probe(void) return ide_legacy_device_add(&dtc2278_port_info, 0); } -int probe_dtc2278 = 0; +static int probe_dtc2278; module_param_named(probe, probe_dtc2278, bool, 0); MODULE_PARM_DESC(probe, "probe for DTC2278xx chipsets"); diff --git a/drivers/ide/legacy/falconide.c b/drivers/ide/legacy/falconide.c index 5c19c422c5c..56cdaa0eeea 100644 --- a/drivers/ide/legacy/falconide.c +++ b/drivers/ide/legacy/falconide.c @@ -50,12 +50,12 @@ static void __init falconide_setup_ports(hw_regs_t *hw) memset(hw, 0, sizeof(*hw)); - hw->io_ports[IDE_DATA_OFFSET] = ATA_HD_BASE; + hw->io_ports.data_addr = ATA_HD_BASE; for (i = 1; i < 8; i++) - hw->io_ports[i] = ATA_HD_BASE + 1 + i * 4; + hw->io_ports_array[i] = ATA_HD_BASE + 1 + i * 4; - hw->io_ports[IDE_CONTROL_OFFSET] = ATA_HD_BASE + ATA_HD_CONTROL; + hw->io_ports.ctl_addr = ATA_HD_BASE + ATA_HD_CONTROL; hw->irq = IRQ_MFP_IDE; hw->ack_intr = NULL; diff --git a/drivers/ide/legacy/gayle.c b/drivers/ide/legacy/gayle.c index a0c9601bdaf..a9c2593a898 100644 --- a/drivers/ide/legacy/gayle.c +++ b/drivers/ide/legacy/gayle.c @@ -63,6 +63,8 @@ #define GAYLE_HAS_CONTROL_REG (!ide_doubler) #define GAYLE_IDEREG_SIZE (ide_doubler ? 0x1000 : 0x2000) int ide_doubler = 0; /* support IDE doublers? */ +module_param_named(doubler, ide_doubler, bool, 0); +MODULE_PARM_DESC(doubler, "enable support for IDE doublers"); #endif /* CONFIG_BLK_DEV_IDEDOUBLER */ @@ -74,7 +76,7 @@ static int gayle_ack_intr_a4000(ide_hwif_t *hwif) { unsigned char ch; - ch = z_readb(hwif->io_ports[IDE_IRQ_OFFSET]); + ch = z_readb(hwif->io_ports.irq_addr); if (!(ch & GAYLE_IRQ_IDE)) return 0; return 1; @@ -84,11 +86,11 @@ static int gayle_ack_intr_a1200(ide_hwif_t *hwif) { unsigned char ch; - ch = z_readb(hwif->io_ports[IDE_IRQ_OFFSET]); + ch = z_readb(hwif->io_ports.irq_addr); if (!(ch & GAYLE_IRQ_IDE)) return 0; - (void)z_readb(hwif->io_ports[IDE_STATUS_OFFSET]); - z_writeb(0x7c, hwif->io_ports[IDE_IRQ_OFFSET]); + (void)z_readb(hwif->io_ports.status_addr); + z_writeb(0x7c, hwif->io_ports.irq_addr); return 1; } @@ -100,13 +102,13 @@ static void __init gayle_setup_ports(hw_regs_t *hw, unsigned long base, memset(hw, 0, sizeof(*hw)); - hw->io_ports[IDE_DATA_OFFSET] = base; + hw->io_ports.data_addr = base; for (i = 1; i < 8; i++) - hw->io_ports[i] = base + 2 + i * 4; + hw->io_ports_array[i] = base + 2 + i * 4; - hw->io_ports[IDE_CONTROL_OFFSET] = ctl; - hw->io_ports[IDE_IRQ_OFFSET] = irq_port; + hw->io_ports.ctl_addr = ctl; + hw->io_ports.irq_addr = irq_port; hw->irq = IRQ_AMIGA_PORTS; hw->ack_intr = ack_intr; diff --git a/drivers/ide/legacy/ht6560b.c b/drivers/ide/legacy/ht6560b.c index 702d8deb578..4fe516df9f7 100644 --- a/drivers/ide/legacy/ht6560b.c +++ b/drivers/ide/legacy/ht6560b.c @@ -157,8 +157,8 @@ static void ht6560b_selectproc (ide_drive_t *drive) /* * Set timing for this drive: */ - outb(timing, hwif->io_ports[IDE_SELECT_OFFSET]); - (void)inb(hwif->io_ports[IDE_STATUS_OFFSET]); + outb(timing, hwif->io_ports.device_addr); + (void)inb(hwif->io_ports.status_addr); #ifdef DEBUG printk("ht6560b: %s: select=%#x timing=%#x\n", drive->name, select, timing); @@ -212,8 +212,8 @@ static u8 ht_pio2timings(ide_drive_t *drive, const u8 pio) { int active_time, recovery_time; int active_cycles, recovery_cycles; - int bus_speed = system_bus_clock(); - + int bus_speed = ide_vlb_clk ? ide_vlb_clk : system_bus_clock(); + if (pio) { unsigned int cycle_time; @@ -323,7 +323,7 @@ static void __init ht6560b_port_init_devs(ide_hwif_t *hwif) hwif->drives[1].drive_data = t; } -int probe_ht6560b = 0; +static int probe_ht6560b; module_param_named(probe, probe_ht6560b, bool, 0); MODULE_PARM_DESC(probe, "probe for HT6560B chipset"); @@ -340,7 +340,6 @@ static const struct ide_port_info ht6560b_port_info __initdata = { .port_ops = &ht6560b_port_ops, .host_flags = IDE_HFLAG_SERIALIZE | /* is this needed? */ IDE_HFLAG_NO_DMA | - IDE_HFLAG_NO_AUTOTUNE | IDE_HFLAG_ABUSE_PREFETCH, .pio_mask = ATA_PIO4, }; diff --git a/drivers/ide/legacy/ide-4drives.c b/drivers/ide/legacy/ide-4drives.c index 17f94d0cb53..ecae916a338 100644 --- a/drivers/ide/legacy/ide-4drives.c +++ b/drivers/ide/legacy/ide-4drives.c @@ -6,7 +6,7 @@ #define DRV_NAME "ide-4drives" -int probe_4drives; +static int probe_4drives; module_param_named(probe, probe_4drives, bool, 0); MODULE_PARM_DESC(probe, "probe for generic IDE chipset with 4 drives/port"); diff --git a/drivers/ide/legacy/ide-cs.c b/drivers/ide/legacy/ide-cs.c index 855e157b18d..aa2ea3deac8 100644 --- a/drivers/ide/legacy/ide-cs.c +++ b/drivers/ide/legacy/ide-cs.c @@ -140,8 +140,8 @@ static void ide_detach(struct pcmcia_device *link) ide_release(link); - release_region(hwif->io_ports[IDE_CONTROL_OFFSET], 1); - release_region(hwif->io_ports[IDE_DATA_OFFSET], 8); + release_region(hwif->io_ports.ctl_addr, 1); + release_region(hwif->io_ports.data_addr, 8); kfree(info); } /* ide_detach */ @@ -183,11 +183,7 @@ static ide_hwif_t *idecs_register(unsigned long io, unsigned long ctl, i = hwif->index; - if (hwif->present) - ide_unregister(i); - else - ide_init_port_data(hwif, i); - + ide_init_port_data(hwif, i); ide_init_port_hw(hwif, &hw); hwif->port_ops = &idecs_port_ops; @@ -390,7 +386,7 @@ void ide_release(struct pcmcia_device *link) if (info->ndev) { /* FIXME: if this fails we need to queue the cleanup somehow -- need to investigate the required PCMCIA magic */ - ide_unregister(hwif->index); + ide_unregister(hwif); } info->ndev = 0; diff --git a/drivers/ide/legacy/ide_platform.c b/drivers/ide/legacy/ide_platform.c index 822f48b05c7..8279dc7ca4c 100644 --- a/drivers/ide/legacy/ide_platform.c +++ b/drivers/ide/legacy/ide_platform.c @@ -30,14 +30,14 @@ static void __devinit plat_ide_setup_ports(hw_regs_t *hw, unsigned long port = (unsigned long)base; int i; - hw->io_ports[IDE_DATA_OFFSET] = port; + hw->io_ports.data_addr = port; port += (1 << pdata->ioport_shift); - for (i = IDE_ERROR_OFFSET; i <= IDE_STATUS_OFFSET; + for (i = 1; i <= 7; i++, port += (1 << pdata->ioport_shift)) - hw->io_ports[i] = port; + hw->io_ports_array[i] = port; - hw->io_ports[IDE_CONTROL_OFFSET] = (unsigned long)ctrl; + hw->io_ports.ctl_addr = (unsigned long)ctrl; hw->irq = irq; @@ -120,7 +120,7 @@ static int __devexit plat_ide_remove(struct platform_device *pdev) { ide_hwif_t *hwif = pdev->dev.driver_data; - ide_unregister(hwif->index); + ide_unregister(hwif); return 0; } diff --git a/drivers/ide/legacy/macide.c b/drivers/ide/legacy/macide.c index 26546d0afc7..1f527bbf8d9 100644 --- a/drivers/ide/legacy/macide.c +++ b/drivers/ide/legacy/macide.c @@ -72,9 +72,9 @@ static void __init macide_setup_ports(hw_regs_t *hw, unsigned long base, memset(hw, 0, sizeof(*hw)); for (i = 0; i < 8; i++) - hw->io_ports[i] = base + i * 4; + hw->io_ports_array[i] = base + i * 4; - hw->io_ports[IDE_CONTROL_OFFSET] = base + IDE_CONTROL; + hw->io_ports.ctl_addr = base + IDE_CONTROL; hw->irq = irq; hw->ack_intr = ack_intr; diff --git a/drivers/ide/legacy/q40ide.c b/drivers/ide/legacy/q40ide.c index f23999dd3d4..a3573d40b4b 100644 --- a/drivers/ide/legacy/q40ide.c +++ b/drivers/ide/legacy/q40ide.c @@ -80,10 +80,10 @@ void q40_ide_setup_ports ( hw_regs_t *hw, for (i = 0; i < IDE_NR_PORTS; i++) { /* BIG FAT WARNING: assumption: only DATA port is ever used in 16 bit mode */ - if ( i==0 ) - hw->io_ports[i] = Q40_ISA_IO_W(base + offsets[i]); + if (i == 0) + hw->io_ports_array[i] = Q40_ISA_IO_W(base + offsets[i]); else - hw->io_ports[i] = Q40_ISA_IO_B(base + offsets[i]); + hw->io_ports_array[i] = Q40_ISA_IO_B(base + offsets[i]); } hw->irq = irq; diff --git a/drivers/ide/legacy/qd65xx.c b/drivers/ide/legacy/qd65xx.c index 15a99aae0cf..6424af15432 100644 --- a/drivers/ide/legacy/qd65xx.c +++ b/drivers/ide/legacy/qd65xx.c @@ -11,11 +11,7 @@ * * QDI QD6500/QD6580 EIDE controller fast support * - * Please set local bus speed using kernel parameter idebus - * for example, "idebus=33" stands for 33Mhz VLbus * To activate controller support, use "ide0=qd65xx" - * To enable tuning, use "hda=autotune hdb=autotune" - * To enable 2nd channel tuning (qd6580 only), use "hdc=autotune hdd=autotune" */ /* @@ -114,17 +110,18 @@ static void qd65xx_select(ide_drive_t *drive) static u8 qd6500_compute_timing (ide_hwif_t *hwif, int active_time, int recovery_time) { - u8 active_cycle,recovery_cycle; + int clk = ide_vlb_clk ? ide_vlb_clk : system_bus_clock(); + u8 act_cyc, rec_cyc; - if (system_bus_clock()<=33) { - active_cycle = 9 - IDE_IN(active_time * system_bus_clock() / 1000 + 1, 2, 9); - recovery_cycle = 15 - IDE_IN(recovery_time * system_bus_clock() / 1000 + 1, 0, 15); + if (clk <= 33) { + act_cyc = 9 - IDE_IN(active_time * clk / 1000 + 1, 2, 9); + rec_cyc = 15 - IDE_IN(recovery_time * clk / 1000 + 1, 0, 15); } else { - active_cycle = 8 - IDE_IN(active_time * system_bus_clock() / 1000 + 1, 1, 8); - recovery_cycle = 18 - IDE_IN(recovery_time * system_bus_clock() / 1000 + 1, 3, 18); + act_cyc = 8 - IDE_IN(active_time * clk / 1000 + 1, 1, 8); + rec_cyc = 18 - IDE_IN(recovery_time * clk / 1000 + 1, 3, 18); } - return((recovery_cycle<<4) | 0x08 | active_cycle); + return (rec_cyc << 4) | 0x08 | act_cyc; } /* @@ -135,10 +132,13 @@ static u8 qd6500_compute_timing (ide_hwif_t *hwif, int active_time, int recovery static u8 qd6580_compute_timing (int active_time, int recovery_time) { - u8 active_cycle = 17 - IDE_IN(active_time * system_bus_clock() / 1000 + 1, 2, 17); - u8 recovery_cycle = 15 - IDE_IN(recovery_time * system_bus_clock() / 1000 + 1, 2, 15); + int clk = ide_vlb_clk ? ide_vlb_clk : system_bus_clock(); + u8 act_cyc, rec_cyc; - return((recovery_cycle<<4) | active_cycle); + act_cyc = 17 - IDE_IN(active_time * clk / 1000 + 1, 2, 17); + rec_cyc = 15 - IDE_IN(recovery_time * clk / 1000 + 1, 2, 15); + + return (rec_cyc << 4) | act_cyc; } /* @@ -322,8 +322,7 @@ static const struct ide_port_info qd65xx_port_info __initdata = { .name = DRV_NAME, .chipset = ide_qd65xx, .host_flags = IDE_HFLAG_IO_32BIT | - IDE_HFLAG_NO_DMA | - IDE_HFLAG_NO_AUTOTUNE, + IDE_HFLAG_NO_DMA, .pio_mask = ATA_PIO4, }; @@ -399,7 +398,7 @@ static int __init qd_probe(int base) return rc; } -int probe_qd65xx = 0; +static int probe_qd65xx; module_param_named(probe, probe_qd65xx, bool, 0); MODULE_PARM_DESC(probe, "probe for QD65xx chipsets"); diff --git a/drivers/ide/legacy/umc8672.c b/drivers/ide/legacy/umc8672.c index 17d515329fe..b54a14a5775 100644 --- a/drivers/ide/legacy/umc8672.c +++ b/drivers/ide/legacy/umc8672.c @@ -130,7 +130,7 @@ static const struct ide_port_info umc8672_port_info __initdata = { .name = DRV_NAME, .chipset = ide_umc8672, .port_ops = &umc8672_port_ops, - .host_flags = IDE_HFLAG_NO_DMA | IDE_HFLAG_NO_AUTOTUNE, + .host_flags = IDE_HFLAG_NO_DMA, .pio_mask = ATA_PIO4, }; @@ -158,7 +158,7 @@ static int __init umc8672_probe(void) return ide_legacy_device_add(&umc8672_port_info, 0); } -int probe_umc8672; +static int probe_umc8672; module_param_named(probe, probe_umc8672, bool, 0); MODULE_PARM_DESC(probe, "probe for UMC8672 chipset"); diff --git a/drivers/ide/mips/au1xxx-ide.c b/drivers/ide/mips/au1xxx-ide.c index 3485a310c95..296b9c674ba 100644 --- a/drivers/ide/mips/au1xxx-ide.c +++ b/drivers/ide/mips/au1xxx-ide.c @@ -502,12 +502,11 @@ static int auide_ddma_init(ide_hwif_t *hwif, const struct ide_port_info *d) static void auide_setup_ports(hw_regs_t *hw, _auide_hwif *ahwif) { int i; - unsigned long *ata_regs = hw->io_ports; + unsigned long *ata_regs = hw->io_ports_array; /* FIXME? */ - for (i = 0; i < IDE_CONTROL_OFFSET; i++) { + for (i = 0; i < 8; i++) *ata_regs++ = ahwif->regbase + (i << AU1XXX_ATA_REG_OFFSET); - } /* set the Alternative Status register */ *ata_regs = ahwif->regbase + (14 << AU1XXX_ATA_REG_OFFSET); @@ -627,7 +626,7 @@ static int au_ide_remove(struct device *dev) ide_hwif_t *hwif = dev_get_drvdata(dev); _auide_hwif *ahwif = &auide_hwif; - ide_unregister(hwif->index); + ide_unregister(hwif); iounmap((void *)ahwif->regbase); diff --git a/drivers/ide/mips/swarm.c b/drivers/ide/mips/swarm.c index 112fe566bb9..68947626e4a 100644 --- a/drivers/ide/mips/swarm.c +++ b/drivers/ide/mips/swarm.c @@ -113,10 +113,10 @@ static int __devinit swarm_ide_probe(struct device *dev) hwif->chipset = ide_generic; - for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++) - hwif->io_ports[i] = + for (i = 0; i <= 7; i++) + hwif->io_ports_array[i] = (unsigned long)(base + ((0x1f0 + i) << 5)); - hwif->io_ports[IDE_CONTROL_OFFSET] = + hwif->io_ports.ctl_addr = (unsigned long)(base + (0x3f6 << 5)); hwif->irq = K_INT_GB_IDE; diff --git a/drivers/ide/pci/aec62xx.c b/drivers/ide/pci/aec62xx.c index ca16f37f948..7f46c224b7c 100644 --- a/drivers/ide/pci/aec62xx.c +++ b/drivers/ide/pci/aec62xx.c @@ -140,7 +140,7 @@ static void aec_set_pio_mode(ide_drive_t *drive, const u8 pio) static unsigned int __devinit init_chipset_aec62xx(struct pci_dev *dev, const char *name) { - int bus_speed = system_bus_clock(); + int bus_speed = ide_pci_clk ? ide_pci_clk : system_bus_clock(); if (bus_speed <= 33) pci_set_drvdata(dev, (void *) aec6xxx_33_base); diff --git a/drivers/ide/pci/alim15x3.c b/drivers/ide/pci/alim15x3.c index b5a3bc33e16..b36a22b8c21 100644 --- a/drivers/ide/pci/alim15x3.c +++ b/drivers/ide/pci/alim15x3.c @@ -38,8 +38,6 @@ #include <asm/io.h> -#define DISPLAY_ALI_TIMINGS - /* * ALi devices are not plug in. Otherwise these static values would * need to go. They ought to go away anyway @@ -49,236 +47,6 @@ static u8 m5229_revision; static u8 chip_is_1543c_e; static struct pci_dev *isa_dev; -#if defined(DISPLAY_ALI_TIMINGS) && defined(CONFIG_IDE_PROC_FS) -#include <linux/stat.h> -#include <linux/proc_fs.h> - -static u8 ali_proc = 0; - -static struct pci_dev *bmide_dev; - -static char *fifo[4] = { - "FIFO Off", - "FIFO On ", - "DMA mode", - "PIO mode" }; - -static char *udmaT[8] = { - "1.5T", - " 2T", - "2.5T", - " 3T", - "3.5T", - " 4T", - " 6T", - " 8T" -}; - -static char *channel_status[8] = { - "OK ", - "busy ", - "DRQ ", - "DRQ busy ", - "error ", - "error busy ", - "error DRQ ", - "error DRQ busy" -}; - -/** - * ali_get_info - generate proc file for ALi IDE - * @buffer: buffer to fill - * @addr: address of user start in buffer - * @offset: offset into 'file' - * @count: buffer count - * - * Walks the Ali devices and outputs summary data on the tuning and - * anything else that will help with debugging - */ - -static int ali_get_info (char *buffer, char **addr, off_t offset, int count) -{ - unsigned long bibma; - u8 reg53h, reg5xh, reg5yh, reg5xh1, reg5yh1, c0, c1, rev, tmp; - char *q, *p = buffer; - - /* fetch rev. */ - pci_read_config_byte(bmide_dev, 0x08, &rev); - if (rev >= 0xc1) /* M1543C or newer */ - udmaT[7] = " ???"; - else - fifo[3] = " ??? "; - - /* first fetch bibma: */ - - bibma = pci_resource_start(bmide_dev, 4); - - /* - * at that point bibma+0x2 et bibma+0xa are byte - * registers to investigate: - */ - c0 = inb(bibma + 0x02); - c1 = inb(bibma + 0x0a); - - p += sprintf(p, - "\n Ali M15x3 Chipset.\n"); - p += sprintf(p, - " ------------------\n"); - pci_read_config_byte(bmide_dev, 0x78, ®53h); - p += sprintf(p, "PCI Clock: %d.\n", reg53h); - - pci_read_config_byte(bmide_dev, 0x53, ®53h); - p += sprintf(p, - "CD_ROM FIFO:%s, CD_ROM DMA:%s\n", - (reg53h & 0x02) ? "Yes" : "No ", - (reg53h & 0x01) ? "Yes" : "No " ); - pci_read_config_byte(bmide_dev, 0x74, ®53h); - p += sprintf(p, - "FIFO Status: contains %d Words, runs%s%s\n\n", - (reg53h & 0x3f), - (reg53h & 0x40) ? " OVERWR" : "", - (reg53h & 0x80) ? " OVERRD." : "." ); - - p += sprintf(p, - "-------------------primary channel" - "-------------------secondary channel" - "---------\n\n"); - - pci_read_config_byte(bmide_dev, 0x09, ®53h); - p += sprintf(p, - "channel status: %s" - " %s\n", - (reg53h & 0x20) ? "On " : "Off", - (reg53h & 0x10) ? "On " : "Off" ); - - p += sprintf(p, - "both channels togth: %s" - " %s\n", - (c0&0x80) ? "No " : "Yes", - (c1&0x80) ? "No " : "Yes" ); - - pci_read_config_byte(bmide_dev, 0x76, ®53h); - p += sprintf(p, - "Channel state: %s %s\n", - channel_status[reg53h & 0x07], - channel_status[(reg53h & 0x70) >> 4] ); - - pci_read_config_byte(bmide_dev, 0x58, ®5xh); - pci_read_config_byte(bmide_dev, 0x5c, ®5yh); - p += sprintf(p, - "Add. Setup Timing: %dT" - " %dT\n", - (reg5xh & 0x07) ? (reg5xh & 0x07) : 8, - (reg5yh & 0x07) ? (reg5yh & 0x07) : 8 ); - - pci_read_config_byte(bmide_dev, 0x59, ®5xh); - pci_read_config_byte(bmide_dev, 0x5d, ®5yh); - p += sprintf(p, - "Command Act. Count: %dT" - " %dT\n" - "Command Rec. Count: %dT" - " %dT\n\n", - (reg5xh & 0x70) ? ((reg5xh & 0x70) >> 4) : 8, - (reg5yh & 0x70) ? ((reg5yh & 0x70) >> 4) : 8, - (reg5xh & 0x0f) ? (reg5xh & 0x0f) : 16, - (reg5yh & 0x0f) ? (reg5yh & 0x0f) : 16 ); - - p += sprintf(p, - "----------------drive0-----------drive1" - "------------drive0-----------drive1------\n\n"); - p += sprintf(p, - "DMA enabled: %s %s" - " %s %s\n", - (c0&0x20) ? "Yes" : "No ", - (c0&0x40) ? "Yes" : "No ", - (c1&0x20) ? "Yes" : "No ", - (c1&0x40) ? "Yes" : "No " ); - - pci_read_config_byte(bmide_dev, 0x54, ®5xh); - pci_read_config_byte(bmide_dev, 0x55, ®5yh); - q = "FIFO threshold: %2d Words %2d Words" - " %2d Words %2d Words\n"; - if (rev < 0xc1) { - if ((rev == 0x20) && - (pci_read_config_byte(bmide_dev, 0x4f, &tmp), (tmp &= 0x20))) { - p += sprintf(p, q, 8, 8, 8, 8); - } else { - p += sprintf(p, q, - (reg5xh & 0x03) + 12, - ((reg5xh & 0x30)>>4) + 12, - (reg5yh & 0x03) + 12, - ((reg5yh & 0x30)>>4) + 12 ); - } - } else { - int t1 = (tmp = (reg5xh & 0x03)) ? (tmp << 3) : 4; - int t2 = (tmp = ((reg5xh & 0x30)>>4)) ? (tmp << 3) : 4; - int t3 = (tmp = (reg5yh & 0x03)) ? (tmp << 3) : 4; - int t4 = (tmp = ((reg5yh & 0x30)>>4)) ? (tmp << 3) : 4; - p += sprintf(p, q, t1, t2, t3, t4); - } - -#if 0 - p += sprintf(p, - "FIFO threshold: %2d Words %2d Words" - " %2d Words %2d Words\n", - (reg5xh & 0x03) + 12, - ((reg5xh & 0x30)>>4) + 12, - (reg5yh & 0x03) + 12, - ((reg5yh & 0x30)>>4) + 12 ); -#endif - - p += sprintf(p, - "FIFO mode: %s %s %s %s\n", - fifo[((reg5xh & 0x0c) >> 2)], - fifo[((reg5xh & 0xc0) >> 6)], - fifo[((reg5yh & 0x0c) >> 2)], - fifo[((reg5yh & 0xc0) >> 6)] ); - - pci_read_config_byte(bmide_dev, 0x5a, ®5xh); - pci_read_config_byte(bmide_dev, 0x5b, ®5xh1); - pci_read_config_byte(bmide_dev, 0x5e, ®5yh); - pci_read_config_byte(bmide_dev, 0x5f, ®5yh1); - - p += sprintf(p,/* - "------------------drive0-----------drive1" - "------------drive0-----------drive1------\n")*/ - "Dt RW act. Cnt %2dT %2dT" - " %2dT %2dT\n" - "Dt RW rec. Cnt %2dT %2dT" - " %2dT %2dT\n\n", - (reg5xh & 0x70) ? ((reg5xh & 0x70) >> 4) : 8, - (reg5xh1 & 0x70) ? ((reg5xh1 & 0x70) >> 4) : 8, - (reg5yh & 0x70) ? ((reg5yh & 0x70) >> 4) : 8, - (reg5yh1 & 0x70) ? ((reg5yh1 & 0x70) >> 4) : 8, - (reg5xh & 0x0f) ? (reg5xh & 0x0f) : 16, - (reg5xh1 & 0x0f) ? (reg5xh1 & 0x0f) : 16, - (reg5yh & 0x0f) ? (reg5yh & 0x0f) : 16, - (reg5yh1 & 0x0f) ? (reg5yh1 & 0x0f) : 16 ); - - p += sprintf(p, - "-----------------------------------UDMA Timings" - "--------------------------------\n\n"); - - pci_read_config_byte(bmide_dev, 0x56, ®5xh); - pci_read_config_byte(bmide_dev, 0x57, ®5yh); - p += sprintf(p, - "UDMA: %s %s" - " %s %s\n" - "UDMA timings: %s %s" - " %s %s\n\n", - (reg5xh & 0x08) ? "OK" : "No", - (reg5xh & 0x80) ? "OK" : "No", - (reg5yh & 0x08) ? "OK" : "No", - (reg5yh & 0x80) ? "OK" : "No", - udmaT[(reg5xh & 0x07)], - udmaT[(reg5xh & 0x70) >> 4], - udmaT[reg5yh & 0x07], - udmaT[(reg5yh & 0x70) >> 4] ); - - return p-buffer; /* => must be less than 4k! */ -} -#endif /* defined(DISPLAY_ALI_TIMINGS) && defined(CONFIG_IDE_PROC_FS) */ - /** * ali_set_pio_mode - set host controller for PIO mode * @drive: drive @@ -294,7 +62,7 @@ static void ali_set_pio_mode(ide_drive_t *drive, const u8 pio) int s_time, a_time, c_time; u8 s_clc, a_clc, r_clc; unsigned long flags; - int bus_speed = system_bus_clock(); + int bus_speed = ide_pci_clk ? ide_pci_clk : system_bus_clock(); int port = hwif->channel ? 0x5c : 0x58; int portFIFO = hwif->channel ? 0x55 : 0x54; u8 cd_dma_fifo = 0; @@ -465,14 +233,6 @@ static unsigned int __devinit init_chipset_ali15x3 (struct pci_dev *dev, const c isa_dev = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL); -#if defined(DISPLAY_ALI_TIMINGS) && defined(CONFIG_IDE_PROC_FS) - if (!ali_proc) { - ali_proc = 1; - bmide_dev = dev; - ide_pci_create_host_proc("ali", ali_get_info); - } -#endif /* defined(DISPLAY_ALI_TIMINGS) && defined(CONFIG_IDE_PROC_FS) */ - local_irq_save(flags); if (m5229_revision < 0xC2) { diff --git a/drivers/ide/pci/amd74xx.c b/drivers/ide/pci/amd74xx.c index f7c883808b0..efcf54338be 100644 --- a/drivers/ide/pci/amd74xx.c +++ b/drivers/ide/pci/amd74xx.c @@ -179,7 +179,7 @@ static unsigned int __devinit init_chipset_amd74xx(struct pci_dev *dev, * Determine the system bus clock. */ - amd_clock = system_bus_clock() * 1000; + amd_clock = (ide_pci_clk ? ide_pci_clk : system_bus_clock()) * 1000; switch (amd_clock) { case 33000: amd_clock = 33333; break; diff --git a/drivers/ide/pci/cmd640.c b/drivers/ide/pci/cmd640.c index 25c2f1bd175..aaf38109eae 100644 --- a/drivers/ide/pci/cmd640.c +++ b/drivers/ide/pci/cmd640.c @@ -111,10 +111,7 @@ #define DRV_NAME "cmd640" -/* - * This flag is set in ide.c by the parameter: ide0=cmd640_vlb - */ -int cmd640_vlb; +static int cmd640_vlb; /* * CMD640 specific registers definition. @@ -350,12 +347,12 @@ static int __init secondary_port_responding(void) spin_lock_irqsave(&cmd640_lock, flags); - outb_p(0x0a, 0x170 + IDE_SELECT_OFFSET); /* select drive0 */ + outb_p(0x0a, 0x176); /* select drive0 */ udelay(100); - if ((inb_p(0x170 + IDE_SELECT_OFFSET) & 0x1f) != 0x0a) { - outb_p(0x1a, 0x170 + IDE_SELECT_OFFSET); /* select drive1 */ + if ((inb_p(0x176) & 0x1f) != 0x0a) { + outb_p(0x1a, 0x176); /* select drive1 */ udelay(100); - if ((inb_p(0x170 + IDE_SELECT_OFFSET) & 0x1f) != 0x1a) { + if ((inb_p(0x176) & 0x1f) != 0x1a) { spin_unlock_irqrestore(&cmd640_lock, flags); return 0; /* nothing responded */ } @@ -383,6 +380,7 @@ static void cmd640_dump_regs(void) } #endif +#ifndef CONFIG_BLK_DEV_CMD640_ENHANCED /* * Check whether prefetch is on for a drive, * and initialize the unmask flags for safe operation. @@ -403,9 +401,7 @@ static void __init check_prefetch(ide_drive_t *drive, unsigned int index) drive->no_io_32bit = 0; } } - -#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED - +#else /* * Sets prefetch mode for a drive. */ @@ -462,34 +458,6 @@ static inline u8 pack_nibbles(u8 upper, u8 lower) } /* - * This routine retrieves the initial drive timings from the chipset. - */ -static void __init retrieve_drive_counts(unsigned int index) -{ - u8 b; - - /* - * Get the internal setup timing, and convert to clock count - */ - b = get_cmd640_reg(arttim_regs[index]) & ~0x3f; - switch (b) { - case 0x00: b = 4; break; - case 0x80: b = 3; break; - case 0x40: b = 2; break; - default: b = 5; break; - } - setup_counts[index] = b; - - /* - * Get the active/recovery counts - */ - b = get_cmd640_reg(drwtim_regs[index]); - active_counts[index] = (b >> 4) ? (b >> 4) : 0x10; - recovery_counts[index] = (b & 0x0f) ? (b & 0x0f) : 0x10; -} - - -/* * This routine writes the prepared setup/active/recovery counts * for a drive into the cmd640 chipset registers to active them. */ @@ -555,7 +523,14 @@ static void cmd640_set_mode(ide_drive_t *drive, unsigned int index, { int setup_time, active_time, recovery_time, clock_time; u8 setup_count, active_count, recovery_count, recovery_count2, cycle_count; - int bus_speed = system_bus_clock(); + int bus_speed; + + if (cmd640_vlb && ide_vlb_clk) + bus_speed = ide_vlb_clk; + else if (!cmd640_vlb && ide_pci_clk) + bus_speed = ide_pci_clk; + else + bus_speed = system_bus_clock(); if (pio_mode > 5) pio_mode = 5; @@ -679,7 +654,6 @@ static const struct ide_port_info cmd640_port_info __initdata = { .chipset = ide_cmd640, .host_flags = IDE_HFLAG_SERIALIZE | IDE_HFLAG_NO_DMA | - IDE_HFLAG_NO_AUTOTUNE | IDE_HFLAG_ABUSE_PREFETCH | IDE_HFLAG_ABUSE_FAST_DEVSEL, #ifdef CONFIG_BLK_DEV_CMD640_ENHANCED @@ -862,29 +836,16 @@ static int __init cmd640x_init(void) } #ifdef CONFIG_BLK_DEV_CMD640_ENHANCED - if (drive->autotune || ((index > 1) && second_port_toggled)) { - /* - * Reset timing to the slowest speed and turn off - * prefetch. This way, the drive identify code has - * a better chance. - */ - setup_counts [index] = 4; /* max possible */ - active_counts [index] = 16; /* max possible */ - recovery_counts [index] = 16; /* max possible */ - program_drive_counts(drive, index); - set_prefetch_mode(drive, index, 0); - printk("cmd640: drive%d timings/prefetch cleared\n", index); - } else { - /* - * Record timings/prefetch without changing them. - * This preserves any prior BIOS setup. - */ - retrieve_drive_counts (index); - check_prefetch(drive, index); - printk("cmd640: drive%d timings/prefetch(%s) preserved", - index, drive->no_io_32bit ? "off" : "on"); - display_clocks(index); - } + /* + * Reset timing to the slowest speed and turn off prefetch. + * This way, the drive identify code has a better chance. + */ + setup_counts [index] = 4; /* max possible */ + active_counts [index] = 16; /* max possible */ + recovery_counts [index] = 16; /* max possible */ + program_drive_counts(drive, index); + set_prefetch_mode(drive, index, 0); + printk("cmd640: drive%d timings/prefetch cleared\n", index); #else /* * Set the drive unmask flags to match the prefetch setting diff --git a/drivers/ide/pci/cmd64x.c b/drivers/ide/pci/cmd64x.c index 006fb62656b..08674711d08 100644 --- a/drivers/ide/pci/cmd64x.c +++ b/drivers/ide/pci/cmd64x.c @@ -68,8 +68,8 @@ static u8 quantize_timing(int timing, int quant) */ static void program_cycle_times (ide_drive_t *drive, int cycle_time, int active_time) { - struct pci_dev *dev = to_pci_dev(drive->hwif->dev); - int clock_time = 1000 / system_bus_clock(); + struct pci_dev *dev = to_pci_dev(drive->hwif->dev); + int clock_time = 1000 / (ide_pci_clk ? ide_pci_clk : system_bus_clock()); u8 cycle_count, active_count, recovery_count, drwtim; static const u8 recovery_values[] = {15, 15, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 0}; @@ -128,7 +128,7 @@ static void cmd64x_tune_pio(ide_drive_t *drive, const u8 pio) ide_pio_timings[pio].active_time); setup_count = quantize_timing(ide_pio_timings[pio].setup_time, - 1000 / system_bus_clock()); + 1000 / (ide_pci_clk ? ide_pci_clk : system_bus_clock())); /* * The primary channel has individual address setup timing registers diff --git a/drivers/ide/pci/cy82c693.c b/drivers/ide/pci/cy82c693.c index e30eae5a01b..77cc22c2ad4 100644 --- a/drivers/ide/pci/cy82c693.c +++ b/drivers/ide/pci/cy82c693.c @@ -18,8 +18,6 @@ * hdparm -t reports 8.17 MB/sec at about 6% CPU usage for the DTTA * - this is my first linux driver, so there's probably a lot of room * for optimizations and bug fixing, so feel free to do it. - * - use idebus=xx parameter to set PCI bus speed - needed to calc - * timings for PIO modes (default will be 40) * - if using PIO mode it's a good idea to set the PIO mode and * 32-bit I/O support (if possible), e.g. hdparm -p2 -c1 /dev/hda * - I had some problems with my IBM DHEA with PIO modes < 2 @@ -136,7 +134,7 @@ static int calc_clk(int time, int bus_speed) static void compute_clocks(u8 pio, pio_clocks_t *p_pclk) { int clk1, clk2; - int bus_speed = system_bus_clock(); /* get speed of PCI bus */ + int bus_speed = ide_pci_clk ? ide_pci_clk : system_bus_clock(); /* we don't check against CY82C693's min and max speed, * so you can play with the idebus=xx parameter diff --git a/drivers/ide/pci/delkin_cb.c b/drivers/ide/pci/delkin_cb.c index c7b7e048328..b9e457996d0 100644 --- a/drivers/ide/pci/delkin_cb.c +++ b/drivers/ide/pci/delkin_cb.c @@ -87,11 +87,7 @@ delkin_cb_probe (struct pci_dev *dev, const struct pci_device_id *id) i = hwif->index; - if (hwif->present) - ide_unregister(i); - else - ide_init_port_data(hwif, i); - + ide_init_port_data(hwif, i); ide_init_port_hw(hwif, &hw); hwif->port_ops = &delkin_cb_port_ops; @@ -123,8 +119,7 @@ delkin_cb_remove (struct pci_dev *dev) { ide_hwif_t *hwif = pci_get_drvdata(dev); - if (hwif) - ide_unregister(hwif->index); + ide_unregister(hwif); pci_release_regions(dev); pci_disable_device(dev); diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c index 8c02961d018..c929dadaaaf 100644 --- a/drivers/ide/pci/hpt366.c +++ b/drivers/ide/pci/hpt366.c @@ -760,7 +760,7 @@ static void hpt3xx_maskproc(ide_drive_t *drive, int mask) } } else outb(mask ? (drive->ctl | 2) : (drive->ctl & ~2), - hwif->io_ports[IDE_CONTROL_OFFSET]); + hwif->io_ports.ctl_addr); } /* diff --git a/drivers/ide/pci/ns87415.c b/drivers/ide/pci/ns87415.c index e1b0c9a9ab9..c13e299077e 100644 --- a/drivers/ide/pci/ns87415.c +++ b/drivers/ide/pci/ns87415.c @@ -72,8 +72,8 @@ static void __devinit superio_ide_init_iops (struct hwif_s *hwif) base = pci_resource_start(pdev, port * 2) & ~3; dmabase = pci_resource_start(pdev, 4) & ~3; - superio_ide_status[port] = base + IDE_STATUS_OFFSET; - superio_ide_select[port] = base + IDE_SELECT_OFFSET; + superio_ide_status[port] = base + 7; + superio_ide_select[port] = base + 6; superio_ide_dma_status[port] = dmabase + (!port ? 2 : 0xa); /* Clear error/interrupt, enable dma */ @@ -231,12 +231,12 @@ static void __devinit init_hwif_ns87415 (ide_hwif_t *hwif) * SELECT_DRIVE() properly during first ide_probe_port(). */ timeout = 10000; - outb(12, hwif->io_ports[IDE_CONTROL_OFFSET]); + outb(12, hwif->io_ports.ctl_addr); udelay(10); - outb(8, hwif->io_ports[IDE_CONTROL_OFFSET]); + outb(8, hwif->io_ports.ctl_addr); do { udelay(50); - stat = hwif->INB(hwif->io_ports[IDE_STATUS_OFFSET]); + stat = hwif->INB(hwif->io_ports.status_addr); if (stat == 0xff) break; } while ((stat & BUSY_STAT) && --timeout); @@ -244,7 +244,7 @@ static void __devinit init_hwif_ns87415 (ide_hwif_t *hwif) } if (!using_inta) - hwif->irq = ide_default_irq(hwif->io_ports[IDE_DATA_OFFSET]); + hwif->irq = ide_default_irq(hwif->io_ports.data_addr); else if (!hwif->irq && hwif->mate && hwif->mate->irq) hwif->irq = hwif->mate->irq; /* share IRQ with mate */ diff --git a/drivers/ide/pci/opti621.c b/drivers/ide/pci/opti621.c index 9edacba20ff..6e99080497b 100644 --- a/drivers/ide/pci/opti621.c +++ b/drivers/ide/pci/opti621.c @@ -53,8 +53,7 @@ * If you then set the second drive to another PIO, the old value * (automatically selected) will be overrided by yours. * There is a 25/33MHz switch in configuration - * register, but driver is written for use at any frequency which get - * (use idebus=xx to select PCI bus speed). + * register, but driver is written for use at any frequency. * * Version 0.1, Nov 8, 1996 * by Jaromir Koutek, for 2.1.8. @@ -210,7 +209,7 @@ static void compute_clocks(int pio, pio_clocks_t *clks) { if (pio != PIO_NOT_EXIST) { int adr_setup, data_pls; - int bus_speed = system_bus_clock(); + int bus_speed = ide_pci_clk ? ide_pci_clk : system_bus_clock(); adr_setup = ide_pio_timings[pio].setup_time; data_pls = ide_pio_timings[pio].active_time; @@ -280,7 +279,7 @@ static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio) spin_lock_irqsave(&opti621_lock, flags); - reg_base = hwif->io_ports[IDE_DATA_OFFSET]; + reg_base = hwif->io_ports.data_addr; /* allow Register-B */ outb(0xc0, reg_base + CNTRL_REG); diff --git a/drivers/ide/pci/scc_pata.c b/drivers/ide/pci/scc_pata.c index 17cf86490d5..ad7cdf9060c 100644 --- a/drivers/ide/pci/scc_pata.c +++ b/drivers/ide/pci/scc_pata.c @@ -334,7 +334,7 @@ static int scc_dma_end(ide_drive_t *drive) /* errata A308 workaround: Step5 (check data loss) */ /* We don't check non ide_disk because it is limited to UDMA4 */ - if (!(in_be32((void __iomem *)hwif->io_ports[IDE_ALTSTATUS_OFFSET]) + if (!(in_be32((void __iomem *)hwif->io_ports.ctl_addr) & ERR_STAT) && drive->media == ide_disk && drive->current_speed > XFER_UDMA_4) { reg = in_be32((void __iomem *)intsts_port); @@ -438,7 +438,7 @@ static int scc_dma_test_irq(ide_drive_t *drive) u32 int_stat = in_be32((void __iomem *)hwif->dma_base + 0x014); /* SCC errata A252,A308 workaround: Step4 */ - if ((in_be32((void __iomem *)hwif->io_ports[IDE_ALTSTATUS_OFFSET]) + if ((in_be32((void __iomem *)hwif->io_ports.ctl_addr) & ERR_STAT) && (int_stat & INTSTS_INTRQ)) return 1; @@ -534,8 +534,8 @@ static int scc_ide_setup_pci_device(struct pci_dev *dev, } memset(&hw, 0, sizeof(hw)); - for (i = IDE_DATA_OFFSET; i <= IDE_CONTROL_OFFSET; i++) - hw.io_ports[i] = ports->dma + 0x20 + i * 4; + for (i = 0; i <= 8; i++) + hw.io_ports_array[i] = ports->dma + 0x20 + i * 4; hw.irq = dev->irq; hw.dev = &dev->dev; hw.chipset = ide_pci; @@ -763,9 +763,8 @@ static void __devexit scc_remove(struct pci_dev *dev) hwif->dmatable_cpu = NULL; } - ide_unregister(hwif->index); + ide_unregister(hwif); - hwif->chipset = ide_unknown; iounmap((void*)ports->dma); iounmap((void*)ports->ctl); pci_release_selected_regions(dev, (1 << 2) - 1); diff --git a/drivers/ide/pci/sgiioc4.c b/drivers/ide/pci/sgiioc4.c index 321a4e28ac1..63e28f4e6d3 100644 --- a/drivers/ide/pci/sgiioc4.c +++ b/drivers/ide/pci/sgiioc4.c @@ -98,28 +98,28 @@ sgiioc4_init_hwif_ports(hw_regs_t * hw, unsigned long data_port, int i; /* Registers are word (32 bit) aligned */ - for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++) - hw->io_ports[i] = reg + i * 4; + for (i = 0; i <= 7; i++) + hw->io_ports_array[i] = reg + i * 4; if (ctrl_port) - hw->io_ports[IDE_CONTROL_OFFSET] = ctrl_port; + hw->io_ports.ctl_addr = ctrl_port; if (irq_port) - hw->io_ports[IDE_IRQ_OFFSET] = irq_port; + hw->io_ports.irq_addr = irq_port; } static void sgiioc4_maskproc(ide_drive_t * drive, int mask) { writeb(mask ? (drive->ctl | 2) : (drive->ctl & ~2), - (void __iomem *)drive->hwif->io_ports[IDE_CONTROL_OFFSET]); + (void __iomem *)drive->hwif->io_ports.ctl_addr); } static int sgiioc4_checkirq(ide_hwif_t * hwif) { unsigned long intr_addr = - hwif->io_ports[IDE_IRQ_OFFSET] + IOC4_INTR_REG * 4; + hwif->io_ports.irq_addr + IOC4_INTR_REG * 4; if ((u8)readl((void __iomem *)intr_addr) & 0x03) return 1; @@ -134,8 +134,8 @@ sgiioc4_clearirq(ide_drive_t * drive) { u32 intr_reg; ide_hwif_t *hwif = HWIF(drive); - unsigned long other_ir = - hwif->io_ports[IDE_IRQ_OFFSET] + (IOC4_INTR_REG << 2); + struct ide_io_ports *io_ports = &hwif->io_ports; + unsigned long other_ir = io_ports->irq_addr + (IOC4_INTR_REG << 2); /* Code to check for PCI error conditions */ intr_reg = readl((void __iomem *)other_ir); @@ -147,12 +147,12 @@ sgiioc4_clearirq(ide_drive_t * drive) * a "clear" status if it got cleared. If not, then spin * for a bit trying to clear it. */ - u8 stat = sgiioc4_INB(hwif->io_ports[IDE_STATUS_OFFSET]); + u8 stat = sgiioc4_INB(io_ports->status_addr); int count = 0; - stat = sgiioc4_INB(hwif->io_ports[IDE_STATUS_OFFSET]); + stat = sgiioc4_INB(io_ports->status_addr); while ((stat & 0x80) && (count++ < 100)) { udelay(1); - stat = sgiioc4_INB(hwif->io_ports[IDE_STATUS_OFFSET]); + stat = sgiioc4_INB(io_ports->status_addr); } if (intr_reg & 0x02) { @@ -162,9 +162,9 @@ sgiioc4_clearirq(ide_drive_t * drive) pci_stat_cmd_reg; pci_err_addr_low = - readl((void __iomem *)hwif->io_ports[IDE_IRQ_OFFSET]); + readl((void __iomem *)io_ports->irq_addr); pci_err_addr_high = - readl((void __iomem *)(hwif->io_ports[IDE_IRQ_OFFSET] + 4)); + readl((void __iomem *)(io_ports->irq_addr + 4)); pci_read_config_dword(dev, PCI_COMMAND, &pci_stat_cmd_reg); printk(KERN_ERR @@ -573,7 +573,6 @@ static const struct ide_port_info sgiioc4_port_info __devinitdata = { .init_dma = ide_dma_sgiioc4, .port_ops = &sgiioc4_port_ops, .dma_ops = &sgiioc4_dma_ops, - .host_flags = IDE_HFLAG_NO_AUTOTUNE, .mwdma_mask = ATA_MWDMA2_ONLY, }; diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c index 1fffea3211b..c2040a017f4 100644 --- a/drivers/ide/pci/siimage.c +++ b/drivers/ide/pci/siimage.c @@ -622,9 +622,10 @@ static void __devinit init_mmio_iops_siimage(ide_hwif_t *hwif) struct pci_dev *dev = to_pci_dev(hwif->dev); void *addr = pci_get_drvdata(dev); u8 ch = hwif->channel; - hw_regs_t hw; unsigned long base; + struct ide_io_ports *io_ports = &hwif->io_ports; + /* * Fill in the basic HWIF bits */ @@ -638,7 +639,7 @@ static void __devinit init_mmio_iops_siimage(ide_hwif_t *hwif) * based I/O */ - memset(&hw, 0, sizeof(hw_regs_t)); + memset(io_ports, 0, sizeof(*io_ports)); base = (unsigned long)addr; if (ch) @@ -651,17 +652,15 @@ static void __devinit init_mmio_iops_siimage(ide_hwif_t *hwif) * so we can't currently use it sanely since we want to * use LBA48 mode. */ - hw.io_ports[IDE_DATA_OFFSET] = base; - hw.io_ports[IDE_ERROR_OFFSET] = base + 1; - hw.io_ports[IDE_NSECTOR_OFFSET] = base + 2; - hw.io_ports[IDE_SECTOR_OFFSET] = base + 3; - hw.io_ports[IDE_LCYL_OFFSET] = base + 4; - hw.io_ports[IDE_HCYL_OFFSET] = base + 5; - hw.io_ports[IDE_SELECT_OFFSET] = base + 6; - hw.io_ports[IDE_STATUS_OFFSET] = base + 7; - hw.io_ports[IDE_CONTROL_OFFSET] = base + 10; - - hw.io_ports[IDE_IRQ_OFFSET] = 0; + io_ports->data_addr = base; + io_ports->error_addr = base + 1; + io_ports->nsect_addr = base + 2; + io_ports->lbal_addr = base + 3; + io_ports->lbam_addr = base + 4; + io_ports->lbah_addr = base + 5; + io_ports->device_addr = base + 6; + io_ports->status_addr = base + 7; + io_ports->ctl_addr = base + 10; if (pdev_is_sata(dev)) { base = (unsigned long)addr; @@ -672,8 +671,6 @@ static void __devinit init_mmio_iops_siimage(ide_hwif_t *hwif) hwif->sata_scr[SATA_CONTROL_OFFSET] = base + 0x100; } - memcpy(hwif->io_ports, hw.io_ports, sizeof(hwif->io_ports)); - hwif->irq = dev->irq; hwif->dma_base = (unsigned long)addr + (ch ? 0x08 : 0x00); diff --git a/drivers/ide/pci/trm290.c b/drivers/ide/pci/trm290.c index 15ee38f7ad3..a8a3138682e 100644 --- a/drivers/ide/pci/trm290.c +++ b/drivers/ide/pci/trm290.c @@ -298,7 +298,7 @@ static void __devinit init_hwif_trm290(ide_hwif_t *hwif) if (old != compat && old_mask == 0xff) { /* leave lower 10 bits untouched */ compat += (next_offset += 0x400); - hwif->io_ports[IDE_CONTROL_OFFSET] = compat + 2; + hwif->io_ports.ctl_addr = compat + 2; outw(compat | 1, hwif->config_data); new = inw(hwif->config_data); printk(KERN_INFO "%s: control basereg workaround: " diff --git a/drivers/ide/pci/via82cxxx.c b/drivers/ide/pci/via82cxxx.c index bbd17bec6ff..566e0ecb8db 100644 --- a/drivers/ide/pci/via82cxxx.c +++ b/drivers/ide/pci/via82cxxx.c @@ -340,7 +340,7 @@ static unsigned int __devinit init_chipset_via82cxxx(struct pci_dev *dev, const * Determine system bus clock. */ - via_clock = system_bus_clock() * 1000; + via_clock = (ide_pci_clk ? ide_pci_clk : system_bus_clock()) * 1000; switch (via_clock) { case 33000: via_clock = 33333; break; diff --git a/drivers/ide/ppc/mpc8xx.c b/drivers/ide/ppc/mpc8xx.c index a82f6efb660..f0e638dcc3a 100644 --- a/drivers/ide/ppc/mpc8xx.c +++ b/drivers/ide/ppc/mpc8xx.c @@ -131,7 +131,7 @@ static int pcmcia_schlvl = PCMCIA_SCHLVL; #if defined(CONFIG_IDE_8xx_PCCARD) || defined(CONFIG_IDE_8xx_DIRECT) static int __init m8xx_ide_init_ports(hw_regs_t *hw, unsigned long data_port) { - unsigned long *p = hw->io_ports; + unsigned long *p = hw->io_ports_array; int i; typedef struct { @@ -314,7 +314,7 @@ static int __init m8xx_ide_init_ports(hw_regs_t *hw, unsigned long data_port) #if defined(CONFIG_IDE_EXT_DIRECT) static int __init m8xx_ide_init_ports(hw_regs_t *hw, unsigned long data_port) { - unsigned long *p = hw->io_ports; + unsigned long *p = hw->io_ports_array; int i; u32 ide_phy_base; @@ -811,24 +811,28 @@ static int __init mpc8xx_ide_probe(void) #ifdef IDE0_BASE_OFFSET memset(&hw, 0, sizeof(hw)); if (!m8xx_ide_init_ports(&hw, 0)) { - ide_hwif_t *hwif = &ide_hwifs[0]; + ide_hwif_t *hwif = ide_find_port(); - ide_init_port_hw(hwif, &hw); - hwif->pio_mask = ATA_PIO4; - hwif->port_ops = &m8xx_port_ops; + if (hwif) { + ide_init_port_hw(hwif, &hw); + hwif->pio_mask = ATA_PIO4; + hwif->port_ops = &m8xx_port_ops; - idx[0] = 0; + idx[0] = hwif->index; + } } #ifdef IDE1_BASE_OFFSET memset(&hw, 0, sizeof(hw)); if (!m8xx_ide_init_ports(&hw, 1)) { - ide_hwif_t *mate = &ide_hwifs[1]; + ide_hwif_t *mate = ide_find_port(); - ide_init_port_hw(mate, &hw); - mate->pio_mask = ATA_PIO4; - mate->port_ops = &m8xx_port_ops; + if (mate) { + ide_init_port_hw(mate, &hw); + mate->pio_mask = ATA_PIO4; + mate->port_ops = &m8xx_port_ops; - idx[1] = 1; + idx[1] = mate->index; + } } #endif #endif diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c index 185faa0dce9..3cac6b2790d 100644 --- a/drivers/ide/ppc/pmac.c +++ b/drivers/ide/ppc/pmac.c @@ -417,7 +417,7 @@ static void pmac_ide_kauai_selectproc(ide_drive_t *drive); #endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */ #define PMAC_IDE_REG(x) \ - ((void __iomem *)((drive)->hwif->io_ports[IDE_DATA_OFFSET] + (x))) + ((void __iomem *)((drive)->hwif->io_ports.data_addr + (x))) /* * Apply the timings of the proper unit (master/slave) to the shared @@ -1086,8 +1086,9 @@ static void __devinit pmac_ide_init_ports(hw_regs_t *hw, unsigned long base) int i; for (i = 0; i < 8; ++i) - hw->io_ports[i] = base + i * 0x10; - hw->io_ports[8] = base + 0x160; + hw->io_ports_array[i] = base + i * 0x10; + + hw->io_ports.ctl_addr = base + 0x160; } /* diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c index 3638fa808de..32553639ade 100644 --- a/drivers/scsi/ide-scsi.c +++ b/drivers/scsi/ide-scsi.c @@ -258,8 +258,7 @@ idescsi_atapi_error(ide_drive_t *drive, struct request *rq, u8 stat, u8 err) if (ide_read_status(drive) & (BUSY_STAT | DRQ_STAT)) /* force an abort */ - hwif->OUTB(WIN_IDLEIMMEDIATE, - hwif->io_ports[IDE_COMMAND_OFFSET]); + hwif->OUTB(WIN_IDLEIMMEDIATE, hwif->io_ports.command_addr); rq->errors++; @@ -410,9 +409,9 @@ static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive) idescsi_end_request (drive, 1, 0); return ide_stopped; } - bcount = (hwif->INB(hwif->io_ports[IDE_BCOUNTH_OFFSET]) << 8) | - hwif->INB(hwif->io_ports[IDE_BCOUNTL_OFFSET]); - ireason = hwif->INB(hwif->io_ports[IDE_IREASON_OFFSET]); + bcount = (hwif->INB(hwif->io_ports.lbah_addr) << 8) | + hwif->INB(hwif->io_ports.lbam_addr); + ireason = hwif->INB(hwif->io_ports.nsect_addr); if (ireason & CD) { printk(KERN_ERR "ide-scsi: CoD != 0 in idescsi_pc_intr\n"); @@ -485,7 +484,7 @@ static ide_startstop_t idescsi_transfer_pc(ide_drive_t *drive) "initiated yet DRQ isn't asserted\n"); return startstop; } - ireason = hwif->INB(hwif->io_ports[IDE_IREASON_OFFSET]); + ireason = hwif->INB(hwif->io_ports.nsect_addr); if ((ireason & CD) == 0 || (ireason & IO)) { printk(KERN_ERR "ide-scsi: (IO,CoD) != (0,1) while " "issuing a packet command\n"); @@ -575,7 +574,7 @@ static ide_startstop_t idescsi_issue_pc(ide_drive_t *drive, return ide_started; } else { /* Issue the packet command */ - hwif->OUTB(WIN_PACKETCMD, hwif->io_ports[IDE_COMMAND_OFFSET]); + hwif->OUTB(WIN_PACKETCMD, hwif->io_ports.command_addr); return idescsi_transfer_pc(drive); } } |