diff options
Diffstat (limited to 'drivers')
103 files changed, 1729 insertions, 1057 deletions
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 9bf2986a278..ae8494944c4 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -651,9 +651,17 @@ config PATA_WINBOND_VLB Support for the Winbond W83759A controller on Vesa Local Bus systems. +config HAVE_PATA_PLATFORM + bool + help + This is an internal configuration node for any machine that + uses pata-platform driver to enable the relevant driver in the + configuration structure without having to submit endless patches + to update the PATA_PLATFORM entry. + config PATA_PLATFORM tristate "Generic platform device PATA support" - depends on EMBEDDED || ARCH_RPC || PPC + depends on EMBEDDED || ARCH_RPC || PPC || HAVE_PATA_PLATFORM help This option enables support for generic directly connected ATA devices commonly found on embedded systems. diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 544b7d6c617..6a4a2a25d97 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -89,6 +89,8 @@ enum { board_ahci_sb600 = 3, board_ahci_mv = 4, board_ahci_sb700 = 5, + board_ahci_mcp65 = 6, + board_ahci_nopmp = 7, /* global controller registers */ HOST_CAP = 0x00, /* host capabilities */ @@ -190,6 +192,7 @@ enum { AHCI_HFLAG_NO_PMP = (1 << 6), /* no PMP */ AHCI_HFLAG_NO_HOTPLUG = (1 << 7), /* ignore PxSERR.DIAG.N */ AHCI_HFLAG_SECT255 = (1 << 8), /* max 255 sectors */ + AHCI_HFLAG_YES_NCQ = (1 << 9), /* force NCQ cap on */ /* ap->flags bits */ @@ -253,6 +256,8 @@ static void ahci_pmp_attach(struct ata_port *ap); static void ahci_pmp_detach(struct ata_port *ap); static int ahci_softreset(struct ata_link *link, unsigned int *class, unsigned long deadline); +static int ahci_sb600_softreset(struct ata_link *link, unsigned int *class, + unsigned long deadline); static int ahci_hardreset(struct ata_link *link, unsigned int *class, unsigned long deadline); static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class, @@ -329,6 +334,12 @@ static struct ata_port_operations ahci_p5wdh_ops = { .hardreset = ahci_p5wdh_hardreset, }; +static struct ata_port_operations ahci_sb600_ops = { + .inherits = &ahci_ops, + .softreset = ahci_sb600_softreset, + .pmp_softreset = ahci_sb600_softreset, +}; + #define AHCI_HFLAGS(flags) .private_data = (void *)(flags) static const struct ata_port_info ahci_port_info[] = { @@ -359,11 +370,11 @@ static const struct ata_port_info ahci_port_info[] = { { AHCI_HFLAGS (AHCI_HFLAG_IGN_SERR_INTERNAL | AHCI_HFLAG_32BIT_ONLY | AHCI_HFLAG_NO_MSI | - AHCI_HFLAG_SECT255 | AHCI_HFLAG_NO_PMP), + AHCI_HFLAG_SECT255), .flags = AHCI_FLAG_COMMON, .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = ATA_UDMA6, - .port_ops = &ahci_ops, + .port_ops = &ahci_sb600_ops, }, /* board_ahci_mv */ { @@ -377,8 +388,23 @@ static const struct ata_port_info ahci_port_info[] = { }, /* board_ahci_sb700 */ { - AHCI_HFLAGS (AHCI_HFLAG_IGN_SERR_INTERNAL | - AHCI_HFLAG_NO_PMP), + AHCI_HFLAGS (AHCI_HFLAG_IGN_SERR_INTERNAL), + .flags = AHCI_FLAG_COMMON, + .pio_mask = 0x1f, /* pio0-4 */ + .udma_mask = ATA_UDMA6, + .port_ops = &ahci_sb600_ops, + }, + /* board_ahci_mcp65 */ + { + AHCI_HFLAGS (AHCI_HFLAG_YES_NCQ), + .flags = AHCI_FLAG_COMMON, + .pio_mask = 0x1f, /* pio0-4 */ + .udma_mask = ATA_UDMA6, + .port_ops = &ahci_ops, + }, + /* board_ahci_nopmp */ + { + AHCI_HFLAGS (AHCI_HFLAG_NO_PMP), .flags = AHCI_FLAG_COMMON, .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = ATA_UDMA6, @@ -438,14 +464,14 @@ static const struct pci_device_id ahci_pci_tbl[] = { { PCI_VDEVICE(VIA, 0x6287), board_ahci_vt8251 }, /* VIA VT8251 */ /* NVIDIA */ - { PCI_VDEVICE(NVIDIA, 0x044c), board_ahci }, /* MCP65 */ - { PCI_VDEVICE(NVIDIA, 0x044d), board_ahci }, /* MCP65 */ - { PCI_VDEVICE(NVIDIA, 0x044e), board_ahci }, /* MCP65 */ - { PCI_VDEVICE(NVIDIA, 0x044f), board_ahci }, /* MCP65 */ - { PCI_VDEVICE(NVIDIA, 0x045c), board_ahci }, /* MCP65 */ - { PCI_VDEVICE(NVIDIA, 0x045d), board_ahci }, /* MCP65 */ - { PCI_VDEVICE(NVIDIA, 0x045e), board_ahci }, /* MCP65 */ - { PCI_VDEVICE(NVIDIA, 0x045f), board_ahci }, /* MCP65 */ + { PCI_VDEVICE(NVIDIA, 0x044c), board_ahci_mcp65 }, /* MCP65 */ + { PCI_VDEVICE(NVIDIA, 0x044d), board_ahci_mcp65 }, /* MCP65 */ + { PCI_VDEVICE(NVIDIA, 0x044e), board_ahci_mcp65 }, /* MCP65 */ + { PCI_VDEVICE(NVIDIA, 0x044f), board_ahci_mcp65 }, /* MCP65 */ + { PCI_VDEVICE(NVIDIA, 0x045c), board_ahci_mcp65 }, /* MCP65 */ + { PCI_VDEVICE(NVIDIA, 0x045d), board_ahci_mcp65 }, /* MCP65 */ + { PCI_VDEVICE(NVIDIA, 0x045e), board_ahci_mcp65 }, /* MCP65 */ + { PCI_VDEVICE(NVIDIA, 0x045f), board_ahci_mcp65 }, /* MCP65 */ { PCI_VDEVICE(NVIDIA, 0x0550), board_ahci }, /* MCP67 */ { PCI_VDEVICE(NVIDIA, 0x0551), board_ahci }, /* MCP67 */ { PCI_VDEVICE(NVIDIA, 0x0552), board_ahci }, /* MCP67 */ @@ -508,9 +534,9 @@ static const struct pci_device_id ahci_pci_tbl[] = { { PCI_VDEVICE(NVIDIA, 0x0bc7), board_ahci }, /* MCP7B */ /* SiS */ - { PCI_VDEVICE(SI, 0x1184), board_ahci }, /* SiS 966 */ - { PCI_VDEVICE(SI, 0x1185), board_ahci }, /* SiS 966 */ - { PCI_VDEVICE(SI, 0x0186), board_ahci }, /* SiS 968 */ + { PCI_VDEVICE(SI, 0x1184), board_ahci_nopmp }, /* SiS 966 */ + { PCI_VDEVICE(SI, 0x1185), board_ahci_nopmp }, /* SiS 968 */ + { PCI_VDEVICE(SI, 0x0186), board_ahci_nopmp }, /* SiS 968 */ /* Marvell */ { PCI_VDEVICE(MARVELL, 0x6145), board_ahci_mv }, /* 6145 */ @@ -624,12 +650,26 @@ static void ahci_save_initial_config(struct pci_dev *pdev, cap &= ~HOST_CAP_NCQ; } + if (!(cap & HOST_CAP_NCQ) && (hpriv->flags & AHCI_HFLAG_YES_NCQ)) { + dev_printk(KERN_INFO, &pdev->dev, + "controller can do NCQ, turning on CAP_NCQ\n"); + cap |= HOST_CAP_NCQ; + } + if ((cap & HOST_CAP_PMP) && (hpriv->flags & AHCI_HFLAG_NO_PMP)) { dev_printk(KERN_INFO, &pdev->dev, "controller can't do PMP, turning off CAP_PMP\n"); cap &= ~HOST_CAP_PMP; } + if (pdev->vendor == PCI_VENDOR_ID_JMICRON && pdev->device == 0x2361 && + port_map != 1) { + dev_printk(KERN_INFO, &pdev->dev, + "JMB361 has only one port, port_map 0x%x -> 0x%x\n", + port_map, 1); + port_map = 1; + } + /* * Temporary Marvell 6145 hack: PATA port presence * is asserted through the standard AHCI port @@ -1262,19 +1302,11 @@ static int ahci_exec_polled_cmd(struct ata_port *ap, int pmp, return 0; } -static int ahci_check_ready(struct ata_link *link) -{ - void __iomem *port_mmio = ahci_port_base(link->ap); - u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF; - - return ata_check_ready(status); -} - -static int ahci_softreset(struct ata_link *link, unsigned int *class, - unsigned long deadline) +static int ahci_do_softreset(struct ata_link *link, unsigned int *class, + int pmp, unsigned long deadline, + int (*check_ready)(struct ata_link *link)) { struct ata_port *ap = link->ap; - int pmp = sata_srst_pmp(link); const char *reason = NULL; unsigned long now, msecs; struct ata_taskfile tf; @@ -1312,7 +1344,7 @@ static int ahci_softreset(struct ata_link *link, unsigned int *class, ahci_exec_polled_cmd(ap, pmp, &tf, 0, 0, 0); /* wait for link to become ready */ - rc = ata_wait_after_reset(link, deadline, ahci_check_ready); + rc = ata_wait_after_reset(link, deadline, check_ready); /* link occupied, -ENODEV too is an error */ if (rc) { reason = "device not ready"; @@ -1328,6 +1360,72 @@ static int ahci_softreset(struct ata_link *link, unsigned int *class, return rc; } +static int ahci_check_ready(struct ata_link *link) +{ + void __iomem *port_mmio = ahci_port_base(link->ap); + u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF; + + return ata_check_ready(status); +} + +static int ahci_softreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + int pmp = sata_srst_pmp(link); + + DPRINTK("ENTER\n"); + + return ahci_do_softreset(link, class, pmp, deadline, ahci_check_ready); +} + +static int ahci_sb600_check_ready(struct ata_link *link) +{ + void __iomem *port_mmio = ahci_port_base(link->ap); + u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF; + u32 irq_status = readl(port_mmio + PORT_IRQ_STAT); + + /* + * There is no need to check TFDATA if BAD PMP is found due to HW bug, + * which can save timeout delay. + */ + if (irq_status & PORT_IRQ_BAD_PMP) + return -EIO; + + return ata_check_ready(status); +} + +static int ahci_sb600_softreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + struct ata_port *ap = link->ap; + void __iomem *port_mmio = ahci_port_base(ap); + int pmp = sata_srst_pmp(link); + int rc; + u32 irq_sts; + + DPRINTK("ENTER\n"); + + rc = ahci_do_softreset(link, class, pmp, deadline, + ahci_sb600_check_ready); + + /* + * Soft reset fails on some ATI chips with IPMS set when PMP + * is enabled but SATA HDD/ODD is connected to SATA port, + * do soft reset again to port 0. + */ + if (rc == -EIO) { + irq_sts = readl(port_mmio + PORT_IRQ_STAT); + if (irq_sts & PORT_IRQ_BAD_PMP) { + ata_link_printk(link, KERN_WARNING, + "failed due to HW bug, retry pmp=0\n"); + rc = ahci_do_softreset(link, class, 0, deadline, + ahci_check_ready); + } + } + + return rc; +} + static int ahci_hardreset(struct ata_link *link, unsigned int *class, unsigned long deadline) { @@ -2118,7 +2216,8 @@ static void ahci_p5wdh_workaround(struct ata_host *host) static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { static int printed_version; - struct ata_port_info pi = ahci_port_info[ent->driver_data]; + unsigned int board_id = ent->driver_data; + struct ata_port_info pi = ahci_port_info[board_id]; const struct ata_port_info *ppi[] = { &pi, NULL }; struct device *dev = &pdev->dev; struct ahci_host_priv *hpriv; @@ -2167,6 +2266,11 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) return -ENOMEM; hpriv->flags |= (unsigned long)pi.private_data; + /* MCP65 revision A1 and A2 can't do MSI */ + if (board_id == board_ahci_mcp65 && + (pdev->revision == 0xa1 || pdev->revision == 0xa2)) + hpriv->flags |= AHCI_HFLAG_NO_MSI; + if ((hpriv->flags & AHCI_HFLAG_NO_MSI) || pci_enable_msi(pdev)) pci_intx(pdev, 1); diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 81b7ae37695..a90ae03f56b 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -1043,6 +1043,13 @@ static int piix_broken_suspend(void) }, }, { + .ident = "TECRA M4", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), + DMI_MATCH(DMI_PRODUCT_NAME, "TECRA M4"), + }, + }, + { .ident = "TECRA M5", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index cc816ca623d..303fc0d2b97 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -4297,7 +4297,7 @@ void ata_sg_clean(struct ata_queued_cmd *qc) } /** - * ata_check_atapi_dma - Check whether ATAPI DMA can be supported + * atapi_check_dma - Check whether ATAPI DMA can be supported * @qc: Metadata associated with taskfile to check * * Allow low-level driver to filter ATA PACKET commands, returning @@ -4310,7 +4310,7 @@ void ata_sg_clean(struct ata_queued_cmd *qc) * RETURNS: 0 when ATAPI DMA can be used * nonzero otherwise */ -int ata_check_atapi_dma(struct ata_queued_cmd *qc) +int atapi_check_dma(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 2e6e1622dc6..57a43649a46 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -2343,8 +2343,8 @@ static unsigned int atapi_xlat(struct ata_queued_cmd *qc) { struct scsi_cmnd *scmd = qc->scsicmd; struct ata_device *dev = qc->dev; - int using_pio = (dev->flags & ATA_DFLAG_PIO); int nodata = (scmd->sc_data_direction == DMA_NONE); + int using_pio = !nodata && (dev->flags & ATA_DFLAG_PIO); unsigned int nbytes; memset(qc->cdb, 0, dev->cdb_len); @@ -2362,7 +2362,7 @@ static unsigned int atapi_xlat(struct ata_queued_cmd *qc) ata_qc_set_pc_nbytes(qc); /* check whether ATAPI DMA is safe */ - if (!using_pio && ata_check_atapi_dma(qc)) + if (!nodata && !using_pio && atapi_check_dma(qc)) using_pio = 1; /* Some controller variants snoop this value for Packet @@ -2402,13 +2402,11 @@ static unsigned int atapi_xlat(struct ata_queued_cmd *qc) qc->tf.lbam = (nbytes & 0xFF); qc->tf.lbah = (nbytes >> 8); - if (using_pio || nodata) { - /* no data, or PIO data xfer */ - if (nodata) - qc->tf.protocol = ATAPI_PROT_NODATA; - else - qc->tf.protocol = ATAPI_PROT_PIO; - } else { + if (nodata) + qc->tf.protocol = ATAPI_PROT_NODATA; + else if (using_pio) + qc->tf.protocol = ATAPI_PROT_PIO; + else { /* DMA data xfer */ qc->tf.protocol = ATAPI_PROT_DMA; qc->tf.feature |= ATAPI_PKT_DMA; diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h index 4514283937e..1cf803adbc9 100644 --- a/drivers/ata/libata.h +++ b/drivers/ata/libata.h @@ -106,7 +106,7 @@ extern void ata_sg_clean(struct ata_queued_cmd *qc); extern void ata_qc_free(struct ata_queued_cmd *qc); extern void ata_qc_issue(struct ata_queued_cmd *qc); extern void __ata_qc_complete(struct ata_queued_cmd *qc); -extern int ata_check_atapi_dma(struct ata_queued_cmd *qc); +extern int atapi_check_dma(struct ata_queued_cmd *qc); extern void swap_buf_le16(u16 *buf, unsigned int buf_words); extern void ata_dev_init(struct ata_device *dev); extern void ata_link_init(struct ata_port *ap, struct ata_link *link, int pmp); diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 60391e9a84d..28092bc5014 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -1322,6 +1322,9 @@ static int mv_port_start(struct ata_port *ap) goto out_port_free_dma_mem; memset(pp->crpb, 0, MV_CRPB_Q_SZ); + /* 6041/6081 Rev. "C0" (and newer) are okay with async notify */ + if (hpriv->hp_flags & MV_HP_ERRATA_60X1C0) + ap->flags |= ATA_FLAG_AN; /* * For GEN_I, there's no NCQ, so we only allocate a single sg_tbl. * For later hardware, we need one unique sg_tbl per NCQ tag. @@ -1592,6 +1595,24 @@ static unsigned int mv_qc_issue(struct ata_queued_cmd *qc) if ((qc->tf.protocol != ATA_PROT_DMA) && (qc->tf.protocol != ATA_PROT_NCQ)) { + static int limit_warnings = 10; + /* + * Errata SATA#16, SATA#24: warn if multiple DRQs expected. + * + * Someday, we might implement special polling workarounds + * for these, but it all seems rather unnecessary since we + * normally use only DMA for commands which transfer more + * than a single block of data. + * + * Much of the time, this could just work regardless. + * So for now, just log the incident, and allow the attempt. + */ + if (limit_warnings && (qc->nbytes / qc->sect_size) > 1) { + --limit_warnings; + ata_link_printk(qc->dev->link, KERN_WARNING, DRV_NAME + ": attempting PIO w/multiple DRQ: " + "this may fail due to h/w errata\n"); + } /* * We're about to send a non-EDMA capable command to the * port. Turn off EDMA so there won't be problems accessing diff --git a/drivers/atm/he.c b/drivers/atm/he.c index ffc4a5a4194..ea495b21f91 100644 --- a/drivers/atm/he.c +++ b/drivers/atm/he.c @@ -1542,7 +1542,8 @@ he_start(struct atm_dev *dev) /* initialize framer */ #ifdef CONFIG_ATM_HE_USE_SUNI - suni_init(he_dev->atm_dev); + if (he_isMM(he_dev)) + suni_init(he_dev->atm_dev); if (he_dev->atm_dev->phy && he_dev->atm_dev->phy->start) he_dev->atm_dev->phy->start(he_dev->atm_dev); #endif /* CONFIG_ATM_HE_USE_SUNI */ @@ -1554,6 +1555,7 @@ he_start(struct atm_dev *dev) val = he_phy_get(he_dev->atm_dev, SUNI_TPOP_APM); val = (val & ~SUNI_TPOP_APM_S) | (SUNI_TPOP_S_SDH << SUNI_TPOP_APM_S_SHIFT); he_phy_put(he_dev->atm_dev, val, SUNI_TPOP_APM); + he_phy_put(he_dev->atm_dev, SUNI_TACP_IUCHP_CLP, SUNI_TACP_IUCHP); } /* 5.1.12 enable transmit and receive */ @@ -2844,10 +2846,15 @@ he_ioctl(struct atm_dev *atm_dev, unsigned int cmd, void __user *arg) if (copy_from_user(®, arg, sizeof(struct he_ioctl_reg))) return -EFAULT; - + spin_lock_irqsave(&he_dev->global_lock, flags); switch (reg.type) { case HE_REGTYPE_PCI: + if (reg.addr < 0 || reg.addr >= HE_REGMAP_SIZE) { + err = -EINVAL; + break; + } + reg.val = he_readl(he_dev, reg.addr); break; case HE_REGTYPE_RCM: diff --git a/drivers/atm/he.h b/drivers/atm/he.h index fe6cd15a78a..b87d6ccabac 100644 --- a/drivers/atm/he.h +++ b/drivers/atm/he.h @@ -267,13 +267,7 @@ struct he_dev { char prod_id[30]; char mac_addr[6]; - int media; /* - * 0x26 = HE155 MM - * 0x27 = HE622 MM - * 0x46 = HE155 SM - * 0x47 = HE622 SM - */ - + int media; unsigned int vcibits, vpibits; unsigned int cells_per_row; @@ -392,6 +386,7 @@ struct he_vcc #define HE_DEV(dev) ((struct he_dev *) (dev)->dev_data) #define he_is622(dev) ((dev)->media & 0x1) +#define he_isMM(dev) ((dev)->media & 0x20) #define HE_REGMAP_SIZE 0x100000 @@ -876,8 +871,8 @@ struct he_vcc #define M_SN 0x3a /* integer */ #define MEDIA 0x3e /* integer */ #define HE155MM 0x26 -#define HE155SM 0x27 -#define HE622MM 0x46 +#define HE622MM 0x27 +#define HE155SM 0x46 #define HE622SM 0x47 #define MAC_ADDR 0x42 /* char[] */ diff --git a/drivers/atm/iphase.c b/drivers/atm/iphase.c index 5c28ca7380f..139fce6968a 100644 --- a/drivers/atm/iphase.c +++ b/drivers/atm/iphase.c @@ -2562,17 +2562,11 @@ static int __devinit ia_start(struct atm_dev *dev) error = suni_init(dev); if (error) goto err_free_rx; - /* - * Enable interrupt on loss of signal - * SUNI_RSOP_CIE - 0x10 - * SUNI_RSOP_CIE_LOSE - 0x04 - */ - ia_phy_put(dev, ia_phy_get(dev, 0x10) | 0x04, 0x10); -#ifndef MODULE - error = dev->phy->start(dev); - if (error) - goto err_free_rx; -#endif + if (dev->phy->start) { + error = dev->phy->start(dev); + if (error) + goto err_free_rx; + } /* Get iadev->carrier_detect status */ IaFrontEndIntr(iadev); } @@ -3198,6 +3192,8 @@ static int __devinit ia_init_one(struct pci_dev *pdev, IF_INIT(printk("dev_id = 0x%x iadev->LineRate = %d \n", (u32)dev, iadev->LineRate);) + pci_set_drvdata(pdev, dev); + ia_dev[iadev_count] = iadev; _ia_dev[iadev_count] = dev; iadev_count++; @@ -3219,8 +3215,6 @@ static int __devinit ia_init_one(struct pci_dev *pdev, iadev->next_board = ia_boards; ia_boards = dev; - pci_set_drvdata(pdev, dev); - return 0; err_out_deregister_dev: @@ -3238,9 +3232,14 @@ static void __devexit ia_remove_one(struct pci_dev *pdev) struct atm_dev *dev = pci_get_drvdata(pdev); IADEV *iadev = INPH_IA_DEV(dev); - ia_phy_put(dev, ia_phy_get(dev,0x10) & ~(0x4), 0x10); + /* Disable phy interrupts */ + ia_phy_put(dev, ia_phy_get(dev, SUNI_RSOP_CIE) & ~(SUNI_RSOP_CIE_LOSE), + SUNI_RSOP_CIE); udelay(1); + if (dev->phy && dev->phy->stop) + dev->phy->stop(dev); + /* De-register device */ free_irq(iadev->irq, dev); iadev_count--; diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index e336b05fe4a..5f1e1cc6165 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -53,15 +53,16 @@ #include <linux/scatterlist.h> #define CCISS_DRIVER_VERSION(maj,min,submin) ((maj<<16)|(min<<8)|(submin)) -#define DRIVER_NAME "HP CISS Driver (v 3.6.14)" -#define DRIVER_VERSION CCISS_DRIVER_VERSION(3,6,14) +#define DRIVER_NAME "HP CISS Driver (v 3.6.20)" +#define DRIVER_VERSION CCISS_DRIVER_VERSION(3, 6, 20) /* Embedded module documentation macros - see modules.h */ MODULE_AUTHOR("Hewlett-Packard Company"); -MODULE_DESCRIPTION("Driver for HP Controller SA5xxx SA6xxx version 3.6.14"); +MODULE_DESCRIPTION("Driver for HP Smart Array Controllers"); MODULE_SUPPORTED_DEVICE("HP SA5i SA5i+ SA532 SA5300 SA5312 SA641 SA642 SA6400" - " SA6i P600 P800 P400 P400i E200 E200i E500"); -MODULE_VERSION("3.6.14"); + " SA6i P600 P800 P400 P400i E200 E200i E500 P700m" + " Smart Array G2 Series SAS/SATA Controllers"); +MODULE_VERSION("3.6.20"); MODULE_LICENSE("GPL"); #include "cciss_cmd.h" @@ -90,6 +91,11 @@ static const struct pci_device_id cciss_pci_device_id[] = { {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSD, 0x103C, 0x3215}, {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSC, 0x103C, 0x3237}, {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSC, 0x103C, 0x323D}, + {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3241}, + {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3243}, + {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3245}, + {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3247}, + {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3249}, {PCI_VENDOR_ID_HP, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_RAID << 8, 0xffff << 8, 0}, {0,} @@ -123,6 +129,11 @@ static struct board_type products[] = { {0x3215103C, "Smart Array E200i", &SA5_access, 120}, {0x3237103C, "Smart Array E500", &SA5_access, 512}, {0x323D103C, "Smart Array P700m", &SA5_access, 512}, + {0x3241103C, "Smart Array P212", &SA5_access, 384}, + {0x3243103C, "Smart Array P410", &SA5_access, 384}, + {0x3245103C, "Smart Array P410i", &SA5_access, 384}, + {0x3247103C, "Smart Array P411", &SA5_access, 384}, + {0x3249103C, "Smart Array P812", &SA5_access, 384}, {0xFFFF103C, "Unknown Smart Array", &SA5_access, 120}, }; diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index d307bf26af5..2d854bb9373 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -749,7 +749,7 @@ config NVRAM if RTC_LIB=n config RTC - tristate "Enhanced Real Time Clock Support" + tristate "Enhanced Real Time Clock Support (legacy PC RTC driver)" depends on !PPC && !PARISC && !IA64 && !M68K && !SPARC && !FRV \ && !ARM && !SUPERH && !S390 && !AVR32 ---help--- @@ -1036,9 +1036,9 @@ config HPET non-periodic and/or periodic. config HPET_RTC_IRQ - bool "HPET Control RTC IRQ" if !HPET_EMULATE_RTC - default n - depends on HPET + bool + default HPET_EMULATE_RTC + depends on RTC && HPET help If you say Y here, you will disable RTC_IRQ in drivers/char/rtc.c. It is assumed the platform called hpet_alloc with the RTC IRQ values for diff --git a/drivers/char/agp/agp.h b/drivers/char/agp/agp.h index 99e6a406efb..81e14bea54b 100644 --- a/drivers/char/agp/agp.h +++ b/drivers/char/agp/agp.h @@ -99,8 +99,8 @@ struct agp_bridge_driver { const void *aperture_sizes; int num_aperture_sizes; enum aper_size_type size_type; - int cant_use_aperture; - int needs_scratch_page; + bool cant_use_aperture; + bool needs_scratch_page; const struct gatt_mask *masks; int (*fetch_size)(void); int (*configure)(void); @@ -278,7 +278,7 @@ void agp_generic_destroy_page(void *addr, int flags); void agp_free_key(int key); int agp_num_entries(void); u32 agp_collect_device_status(struct agp_bridge_data *bridge, u32 mode, u32 command); -void agp_device_command(u32 command, int agp_v3); +void agp_device_command(u32 command, bool agp_v3); int agp_3_5_enable(struct agp_bridge_data *bridge); void global_cache_flush(void); void get_agp_version(struct agp_bridge_data *bridge); diff --git a/drivers/char/agp/alpha-agp.c b/drivers/char/agp/alpha-agp.c index e77c17838c8..5da89f6c6c2 100644 --- a/drivers/char/agp/alpha-agp.c +++ b/drivers/char/agp/alpha-agp.c @@ -80,7 +80,7 @@ static void alpha_core_agp_enable(struct agp_bridge_data *bridge, u32 mode) agp->mode.bits.enable = 1; agp->ops->configure(agp); - agp_device_command(agp->mode.lw, 0); + agp_device_command(agp->mode.lw, false); } static int alpha_core_agp_insert_memory(struct agp_memory *mem, off_t pg_start, @@ -126,7 +126,7 @@ struct agp_bridge_driver alpha_core_agp_driver = { .aperture_sizes = alpha_core_agp_sizes, .num_aperture_sizes = 1, .size_type = FIXED_APER_SIZE, - .cant_use_aperture = 1, + .cant_use_aperture = true, .masks = NULL, .fetch_size = alpha_core_agp_fetch_size, diff --git a/drivers/char/agp/amd-k7-agp.c b/drivers/char/agp/amd-k7-agp.c index 96bdb9296b0..39a0718bc61 100644 --- a/drivers/char/agp/amd-k7-agp.c +++ b/drivers/char/agp/amd-k7-agp.c @@ -314,9 +314,9 @@ static int amd_insert_memory(struct agp_memory *mem, off_t pg_start, int type) j++; } - if (mem->is_flushed == FALSE) { + if (!mem->is_flushed) { global_cache_flush(); - mem->is_flushed = TRUE; + mem->is_flushed = true; } for (i = 0, j = pg_start; i < mem->page_count; i++, j++) { diff --git a/drivers/char/agp/amd64-agp.c b/drivers/char/agp/amd64-agp.c index d8200ac8f8c..13665db363d 100644 --- a/drivers/char/agp/amd64-agp.c +++ b/drivers/char/agp/amd64-agp.c @@ -90,9 +90,9 @@ static int amd64_insert_memory(struct agp_memory *mem, off_t pg_start, int type) j++; } - if (mem->is_flushed == FALSE) { + if (!mem->is_flushed) { global_cache_flush(); - mem->is_flushed = TRUE; + mem->is_flushed = true; } for (i = 0, j = pg_start; i < mem->page_count; i++, j++) { diff --git a/drivers/char/agp/ati-agp.c b/drivers/char/agp/ati-agp.c index 55c97f62324..3a4566c0d84 100644 --- a/drivers/char/agp/ati-agp.c +++ b/drivers/char/agp/ati-agp.c @@ -287,10 +287,10 @@ static int ati_insert_memory(struct agp_memory * mem, j++; } - if (mem->is_flushed == FALSE) { + if (!mem->is_flushed) { /*CACHE_FLUSH(); */ global_cache_flush(); - mem->is_flushed = TRUE; + mem->is_flushed = true; } for (i = 0, j = pg_start; i < mem->page_count; i++, j++) { @@ -458,6 +458,10 @@ static struct agp_device_ids ati_agp_device_ids[] __devinitdata = .chipset_name = "IGP9100/M", }, { + .device_id = PCI_DEVICE_ID_ATI_RS350_133, + .chipset_name = "IGP9000/M", + }, + { .device_id = PCI_DEVICE_ID_ATI_RS350_200, .chipset_name = "IGP9100/M", }, diff --git a/drivers/char/agp/backend.c b/drivers/char/agp/backend.c index b1bdd015165..1ec87104e68 100644 --- a/drivers/char/agp/backend.c +++ b/drivers/char/agp/backend.c @@ -188,10 +188,10 @@ static int agp_backend_initialize(struct agp_bridge_data *bridge) err_out: if (bridge->driver->needs_scratch_page) { - bridge->driver->agp_destroy_page(gart_to_virt(bridge->scratch_page_real), - AGP_PAGE_DESTROY_UNMAP); - bridge->driver->agp_destroy_page(gart_to_virt(bridge->scratch_page_real), - AGP_PAGE_DESTROY_FREE); + void *va = gart_to_virt(bridge->scratch_page_real); + + bridge->driver->agp_destroy_page(va, AGP_PAGE_DESTROY_UNMAP); + bridge->driver->agp_destroy_page(va, AGP_PAGE_DESTROY_FREE); } if (got_gatt) bridge->driver->free_gatt_table(bridge); @@ -215,10 +215,10 @@ static void agp_backend_cleanup(struct agp_bridge_data *bridge) if (bridge->driver->agp_destroy_page && bridge->driver->needs_scratch_page) { - bridge->driver->agp_destroy_page(gart_to_virt(bridge->scratch_page_real), - AGP_PAGE_DESTROY_UNMAP); - bridge->driver->agp_destroy_page(gart_to_virt(bridge->scratch_page_real), - AGP_PAGE_DESTROY_FREE); + void *va = gart_to_virt(bridge->scratch_page_real); + + bridge->driver->agp_destroy_page(va, AGP_PAGE_DESTROY_UNMAP); + bridge->driver->agp_destroy_page(va, AGP_PAGE_DESTROY_FREE); } } diff --git a/drivers/char/agp/compat_ioctl.c b/drivers/char/agp/compat_ioctl.c index 39275794fe6..58c57cb2518 100644 --- a/drivers/char/agp/compat_ioctl.c +++ b/drivers/char/agp/compat_ioctl.c @@ -214,7 +214,7 @@ long compat_agp_ioctl(struct file *file, unsigned int cmd, unsigned long arg) ret_val = -EINVAL; goto ioctl_out; } - if ((agp_fe.backend_acquired != TRUE) && + if ((agp_fe.backend_acquired != true) && (cmd != AGPIOC_ACQUIRE32)) { ret_val = -EBUSY; goto ioctl_out; diff --git a/drivers/char/agp/efficeon-agp.c b/drivers/char/agp/efficeon-agp.c index cac0009cebc..8ca6f262ef8 100644 --- a/drivers/char/agp/efficeon-agp.c +++ b/drivers/char/agp/efficeon-agp.c @@ -249,9 +249,9 @@ static int efficeon_insert_memory(struct agp_memory * mem, off_t pg_start, int t if (type != 0 || mem->type != 0) return -EINVAL; - if (mem->is_flushed == FALSE) { + if (!mem->is_flushed) { global_cache_flush(); - mem->is_flushed = TRUE; + mem->is_flushed = true; } last_page = NULL; @@ -329,7 +329,7 @@ static const struct agp_bridge_driver efficeon_driver = { .free_gatt_table = efficeon_free_gatt_table, .insert_memory = efficeon_insert_memory, .remove_memory = efficeon_remove_memory, - .cant_use_aperture = 0, // 1 might be faster? + .cant_use_aperture = false, // true might be faster? // Generic .alloc_by_type = agp_generic_alloc_by_type, diff --git a/drivers/char/agp/frontend.c b/drivers/char/agp/frontend.c index 857b26227d8..e6cb1ab03e0 100644 --- a/drivers/char/agp/frontend.c +++ b/drivers/char/agp/frontend.c @@ -395,7 +395,7 @@ static int agp_remove_controller(struct agp_controller *controller) if (agp_fe.current_controller == controller) { agp_fe.current_controller = NULL; - agp_fe.backend_acquired = FALSE; + agp_fe.backend_acquired = false; agp_backend_release(agp_bridge); } kfree(controller); @@ -443,7 +443,7 @@ static void agp_controller_release_current(struct agp_controller *controller, } agp_fe.current_controller = NULL; - agp_fe.used_by_controller = FALSE; + agp_fe.used_by_controller = false; agp_backend_release(agp_bridge); } @@ -573,7 +573,7 @@ static int agp_mmap(struct file *file, struct vm_area_struct *vma) mutex_lock(&(agp_fe.agp_mutex)); - if (agp_fe.backend_acquired != TRUE) + if (agp_fe.backend_acquired != true) goto out_eperm; if (!(test_bit(AGP_FF_IS_VALID, &priv->access_flags))) @@ -768,7 +768,7 @@ int agpioc_acquire_wrap(struct agp_file_private *priv) atomic_inc(&agp_bridge->agp_in_use); - agp_fe.backend_acquired = TRUE; + agp_fe.backend_acquired = true; controller = agp_find_controller_by_pid(priv->my_pid); @@ -778,7 +778,7 @@ int agpioc_acquire_wrap(struct agp_file_private *priv) controller = agp_create_controller(priv->my_pid); if (controller == NULL) { - agp_fe.backend_acquired = FALSE; + agp_fe.backend_acquired = false; agp_backend_release(agp_bridge); return -ENOMEM; } @@ -981,7 +981,7 @@ static long agp_ioctl(struct file *file, ret_val = -EINVAL; goto ioctl_out; } - if ((agp_fe.backend_acquired != TRUE) && + if ((agp_fe.backend_acquired != true) && (cmd != AGPIOC_ACQUIRE)) { ret_val = -EBUSY; goto ioctl_out; diff --git a/drivers/char/agp/generic.c b/drivers/char/agp/generic.c index 7fc0c99a3a5..564daaa6c7d 100644 --- a/drivers/char/agp/generic.c +++ b/drivers/char/agp/generic.c @@ -96,13 +96,13 @@ EXPORT_SYMBOL(agp_flush_chipset); void agp_alloc_page_array(size_t size, struct agp_memory *mem) { mem->memory = NULL; - mem->vmalloc_flag = 0; + mem->vmalloc_flag = false; if (size <= 2*PAGE_SIZE) mem->memory = kmalloc(size, GFP_KERNEL | __GFP_NORETRY); if (mem->memory == NULL) { mem->memory = vmalloc(size); - mem->vmalloc_flag = 1; + mem->vmalloc_flag = true; } } EXPORT_SYMBOL(agp_alloc_page_array); @@ -188,7 +188,7 @@ void agp_free_memory(struct agp_memory *curr) if (curr == NULL) return; - if (curr->is_bound == TRUE) + if (curr->is_bound) agp_unbind_memory(curr); if (curr->type >= AGP_USER_TYPES) { @@ -202,10 +202,13 @@ void agp_free_memory(struct agp_memory *curr) } if (curr->page_count != 0) { for (i = 0; i < curr->page_count; i++) { - curr->bridge->driver->agp_destroy_page(gart_to_virt(curr->memory[i]), AGP_PAGE_DESTROY_UNMAP); + curr->memory[i] = (unsigned long)gart_to_virt(curr->memory[i]); + curr->bridge->driver->agp_destroy_page((void *)curr->memory[i], + AGP_PAGE_DESTROY_UNMAP); } for (i = 0; i < curr->page_count; i++) { - curr->bridge->driver->agp_destroy_page(gart_to_virt(curr->memory[i]), AGP_PAGE_DESTROY_FREE); + curr->bridge->driver->agp_destroy_page((void *)curr->memory[i], + AGP_PAGE_DESTROY_FREE); } } agp_free_key(curr->key); @@ -411,20 +414,20 @@ int agp_bind_memory(struct agp_memory *curr, off_t pg_start) if (curr == NULL) return -EINVAL; - if (curr->is_bound == TRUE) { + if (curr->is_bound) { printk(KERN_INFO PFX "memory %p is already bound!\n", curr); return -EINVAL; } - if (curr->is_flushed == FALSE) { + if (!curr->is_flushed) { curr->bridge->driver->cache_flush(); - curr->is_flushed = TRUE; + curr->is_flushed = true; } ret_val = curr->bridge->driver->insert_memory(curr, pg_start, curr->type); if (ret_val != 0) return ret_val; - curr->is_bound = TRUE; + curr->is_bound = true; curr->pg_start = pg_start; return 0; } @@ -446,7 +449,7 @@ int agp_unbind_memory(struct agp_memory *curr) if (curr == NULL) return -EINVAL; - if (curr->is_bound != TRUE) { + if (!curr->is_bound) { printk(KERN_INFO PFX "memory %p was not bound!\n", curr); return -EINVAL; } @@ -456,7 +459,7 @@ int agp_unbind_memory(struct agp_memory *curr) if (ret_val != 0) return ret_val; - curr->is_bound = FALSE; + curr->is_bound = false; curr->pg_start = 0; return 0; } @@ -754,7 +757,7 @@ u32 agp_collect_device_status(struct agp_bridge_data *bridge, u32 requested_mode EXPORT_SYMBOL(agp_collect_device_status); -void agp_device_command(u32 bridge_agpstat, int agp_v3) +void agp_device_command(u32 bridge_agpstat, bool agp_v3) { struct pci_dev *device = NULL; int mode; @@ -818,7 +821,7 @@ void agp_generic_enable(struct agp_bridge_data *bridge, u32 requested_mode) /* If we have 3.5, we can do the isoch stuff. */ if (bridge->minor_version >= 5) agp_3_5_enable(bridge); - agp_device_command(bridge_agpstat, TRUE); + agp_device_command(bridge_agpstat, true); return; } else { /* Disable calibration cycle in RX91<1> when not in AGP3.0 mode of operation.*/ @@ -835,7 +838,7 @@ void agp_generic_enable(struct agp_bridge_data *bridge, u32 requested_mode) } /* AGP v<3 */ - agp_device_command(bridge_agpstat, FALSE); + agp_device_command(bridge_agpstat, false); } EXPORT_SYMBOL(agp_generic_enable); @@ -1083,9 +1086,9 @@ int agp_generic_insert_memory(struct agp_memory * mem, off_t pg_start, int type) j++; } - if (mem->is_flushed == FALSE) { + if (!mem->is_flushed) { bridge->driver->cache_flush(); - mem->is_flushed = TRUE; + mem->is_flushed = true; } for (i = 0, j = pg_start; i < mem->page_count; i++, j++) { diff --git a/drivers/char/agp/hp-agp.c b/drivers/char/agp/hp-agp.c index cbb0444467b..80d7317f85c 100644 --- a/drivers/char/agp/hp-agp.c +++ b/drivers/char/agp/hp-agp.c @@ -353,9 +353,9 @@ hp_zx1_insert_memory (struct agp_memory *mem, off_t pg_start, int type) j++; } - if (mem->is_flushed == FALSE) { + if (!mem->is_flushed) { global_cache_flush(); - mem->is_flushed = TRUE; + mem->is_flushed = true; } for (i = 0, j = io_pg_start; i < mem->page_count; i++) { @@ -437,7 +437,7 @@ const struct agp_bridge_driver hp_zx1_driver = { .agp_alloc_page = agp_generic_alloc_page, .agp_destroy_page = agp_generic_destroy_page, .agp_type_to_mask_type = agp_generic_type_to_mask_type, - .cant_use_aperture = 1, + .cant_use_aperture = true, }; static int __init diff --git a/drivers/char/agp/i460-agp.c b/drivers/char/agp/i460-agp.c index 76f581c85a7..e587eebebc6 100644 --- a/drivers/char/agp/i460-agp.c +++ b/drivers/char/agp/i460-agp.c @@ -580,7 +580,7 @@ const struct agp_bridge_driver intel_i460_driver = { .alloc_by_type = agp_generic_alloc_by_type, .free_by_type = agp_generic_free_by_type, .agp_type_to_mask_type = agp_generic_type_to_mask_type, - .cant_use_aperture = 1, + .cant_use_aperture = true, }; static int __devinit agp_intel_i460_probe(struct pci_dev *pdev, diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c index eeea50a1d22..df702642ab8 100644 --- a/drivers/char/agp/intel-agp.c +++ b/drivers/char/agp/intel-agp.c @@ -34,6 +34,12 @@ #define PCI_DEVICE_ID_INTEL_Q33_IG 0x29D2 #define PCI_DEVICE_ID_INTEL_IGD_HB 0x2A40 #define PCI_DEVICE_ID_INTEL_IGD_IG 0x2A42 +#define PCI_DEVICE_ID_INTEL_IGD_E_HB 0x2E00 +#define PCI_DEVICE_ID_INTEL_IGD_E_IG 0x2E02 +#define PCI_DEVICE_ID_INTEL_Q45_HB 0x2E10 +#define PCI_DEVICE_ID_INTEL_Q45_IG 0x2E12 +#define PCI_DEVICE_ID_INTEL_G45_HB 0x2E20 +#define PCI_DEVICE_ID_INTEL_G45_IG 0x2E22 /* cover 915 and 945 variants */ #define IS_I915 (agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_E7221_HB || \ @@ -55,6 +61,10 @@ agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_Q35_HB || \ agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_Q33_HB) +#define IS_G4X (agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_IGD_E_HB || \ + agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_Q45_HB || \ + agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_G45_HB) + extern int agp_memory_reserved; @@ -80,8 +90,13 @@ extern int agp_memory_reserved; #define I915_PTEADDR 0x1C #define I915_GMCH_GMS_STOLEN_48M (0x6 << 4) #define I915_GMCH_GMS_STOLEN_64M (0x7 << 4) -#define G33_GMCH_GMS_STOLEN_128M (0x8 << 4) -#define G33_GMCH_GMS_STOLEN_256M (0x9 << 4) +#define G33_GMCH_GMS_STOLEN_128M (0x8 << 4) +#define G33_GMCH_GMS_STOLEN_256M (0x9 << 4) +#define INTEL_GMCH_GMS_STOLEN_96M (0xa << 4) +#define INTEL_GMCH_GMS_STOLEN_160M (0xb << 4) +#define INTEL_GMCH_GMS_STOLEN_224M (0xc << 4) +#define INTEL_GMCH_GMS_STOLEN_352M (0xd << 4) + #define I915_IFPADDR 0x60 /* Intel 965G registers */ @@ -325,7 +340,7 @@ static int intel_i810_insert_entries(struct agp_memory *mem, off_t pg_start, out: ret = 0; out_err: - mem->is_flushed = 1; + mem->is_flushed = true; return ret; } @@ -418,9 +433,11 @@ static void intel_i810_free_by_type(struct agp_memory *curr) if (curr->page_count == 4) i8xx_destroy_pages(gart_to_virt(curr->memory[0])); else { - agp_bridge->driver->agp_destroy_page(gart_to_virt(curr->memory[0]), + void *va = gart_to_virt(curr->memory[0]); + + agp_bridge->driver->agp_destroy_page(va, AGP_PAGE_DESTROY_UNMAP); - agp_bridge->driver->agp_destroy_page(gart_to_virt(curr->memory[0]), + agp_bridge->driver->agp_destroy_page(va, AGP_PAGE_DESTROY_FREE); } agp_free_page_array(curr); @@ -504,6 +521,10 @@ static void intel_i830_init_gtt_entries(void) size = 512; } size += 4; + } else if (IS_G4X) { + /* On 4 series hardware, GTT stolen is separate from graphics + * stolen, ignore it in stolen gtt entries counting */ + size = 0; } else { /* On previous hardware, the GTT size was just what was * required to map the aperture. @@ -552,30 +573,54 @@ static void intel_i830_init_gtt_entries(void) break; case I915_GMCH_GMS_STOLEN_48M: /* Check it's really I915G */ - if (IS_I915 || IS_I965 || IS_G33) + if (IS_I915 || IS_I965 || IS_G33 || IS_G4X) gtt_entries = MB(48) - KB(size); else gtt_entries = 0; break; case I915_GMCH_GMS_STOLEN_64M: /* Check it's really I915G */ - if (IS_I915 || IS_I965 || IS_G33) + if (IS_I915 || IS_I965 || IS_G33 || IS_G4X) gtt_entries = MB(64) - KB(size); else gtt_entries = 0; break; case G33_GMCH_GMS_STOLEN_128M: - if (IS_G33) + if (IS_G33 || IS_I965 || IS_G4X) gtt_entries = MB(128) - KB(size); else gtt_entries = 0; break; case G33_GMCH_GMS_STOLEN_256M: - if (IS_G33) + if (IS_G33 || IS_I965 || IS_G4X) gtt_entries = MB(256) - KB(size); else gtt_entries = 0; break; + case INTEL_GMCH_GMS_STOLEN_96M: + if (IS_I965 || IS_G4X) + gtt_entries = MB(96) - KB(size); + else + gtt_entries = 0; + break; + case INTEL_GMCH_GMS_STOLEN_160M: + if (IS_I965 || IS_G4X) + gtt_entries = MB(160) - KB(size); + else + gtt_entries = 0; + break; + case INTEL_GMCH_GMS_STOLEN_224M: + if (IS_I965 || IS_G4X) + gtt_entries = MB(224) - KB(size); + else + gtt_entries = 0; + break; + case INTEL_GMCH_GMS_STOLEN_352M: + if (IS_I965 || IS_G4X) + gtt_entries = MB(352) - KB(size); + else + gtt_entries = 0; + break; default: gtt_entries = 0; break; @@ -793,7 +838,7 @@ static int intel_i830_insert_entries(struct agp_memory *mem, off_t pg_start, out: ret = 0; out_err: - mem->is_flushed = 1; + mem->is_flushed = true; return ret; } @@ -903,7 +948,7 @@ static void intel_i9xx_setup_flush(void) intel_private.ifp_resource.flags = IORESOURCE_MEM; /* Setup chipset flush for 915 */ - if (IS_I965 || IS_G33) { + if (IS_I965 || IS_G33 || IS_G4X) { intel_i965_g33_setup_chipset_flush(); } else { intel_i915_setup_chipset_flush(); @@ -1020,7 +1065,7 @@ static int intel_i915_insert_entries(struct agp_memory *mem, off_t pg_start, out: ret = 0; out_err: - mem->is_flushed = 1; + mem->is_flushed = true; return ret; } @@ -1134,53 +1179,64 @@ static unsigned long intel_i965_mask_memory(struct agp_bridge_data *bridge, return addr | bridge->driver->masks[type].mask; } +static void intel_i965_get_gtt_range(int *gtt_offset, int *gtt_size) +{ + switch (agp_bridge->dev->device) { + case PCI_DEVICE_ID_INTEL_IGD_HB: + case PCI_DEVICE_ID_INTEL_IGD_E_HB: + case PCI_DEVICE_ID_INTEL_Q45_HB: + case PCI_DEVICE_ID_INTEL_G45_HB: + *gtt_offset = *gtt_size = MB(2); + break; + default: + *gtt_offset = *gtt_size = KB(512); + } +} + /* The intel i965 automatically initializes the agp aperture during POST. * Use the memory already set aside for in the GTT. */ static int intel_i965_create_gatt_table(struct agp_bridge_data *bridge) { - int page_order; - struct aper_size_info_fixed *size; - int num_entries; - u32 temp; - int gtt_offset, gtt_size; + int page_order; + struct aper_size_info_fixed *size; + int num_entries; + u32 temp; + int gtt_offset, gtt_size; - size = agp_bridge->current_size; - page_order = size->page_order; - num_entries = size->num_entries; - agp_bridge->gatt_table_real = NULL; + size = agp_bridge->current_size; + page_order = size->page_order; + num_entries = size->num_entries; + agp_bridge->gatt_table_real = NULL; - pci_read_config_dword(intel_private.pcidev, I915_MMADDR, &temp); + pci_read_config_dword(intel_private.pcidev, I915_MMADDR, &temp); - temp &= 0xfff00000; + temp &= 0xfff00000; - if (agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_IGD_HB) - gtt_offset = gtt_size = MB(2); - else - gtt_offset = gtt_size = KB(512); + intel_i965_get_gtt_range(>t_offset, >t_size); - intel_private.gtt = ioremap((temp + gtt_offset) , gtt_size); + intel_private.gtt = ioremap((temp + gtt_offset) , gtt_size); - if (!intel_private.gtt) - return -ENOMEM; + if (!intel_private.gtt) + return -ENOMEM; - intel_private.registers = ioremap(temp, 128 * 4096); - if (!intel_private.registers) { + intel_private.registers = ioremap(temp, 128 * 4096); + if (!intel_private.registers) { iounmap(intel_private.gtt); return -ENOMEM; } - temp = readl(intel_private.registers+I810_PGETBL_CTL) & 0xfffff000; - global_cache_flush(); /* FIXME: ? */ + temp = readl(intel_private.registers+I810_PGETBL_CTL) & 0xfffff000; + global_cache_flush(); /* FIXME: ? */ - /* we have to call this as early as possible after the MMIO base address is known */ - intel_i830_init_gtt_entries(); + /* we have to call this as early as possible after the MMIO base address is known */ + intel_i830_init_gtt_entries(); - agp_bridge->gatt_table = NULL; + agp_bridge->gatt_table = NULL; - agp_bridge->gatt_bus_addr = temp; + agp_bridge->gatt_bus_addr = temp; - return 0; + return 0; } @@ -1656,7 +1712,7 @@ static const struct agp_bridge_driver intel_810_driver = { .aperture_sizes = intel_i810_sizes, .size_type = FIXED_APER_SIZE, .num_aperture_sizes = 2, - .needs_scratch_page = TRUE, + .needs_scratch_page = true, .configure = intel_i810_configure, .fetch_size = intel_i810_fetch_size, .cleanup = intel_i810_cleanup, @@ -1697,7 +1753,7 @@ static const struct agp_bridge_driver intel_815_driver = { .free_by_type = agp_generic_free_by_type, .agp_alloc_page = agp_generic_alloc_page, .agp_destroy_page = agp_generic_destroy_page, - .agp_type_to_mask_type = agp_generic_type_to_mask_type, + .agp_type_to_mask_type = agp_generic_type_to_mask_type, }; static const struct agp_bridge_driver intel_830_driver = { @@ -1705,7 +1761,7 @@ static const struct agp_bridge_driver intel_830_driver = { .aperture_sizes = intel_i830_sizes, .size_type = FIXED_APER_SIZE, .num_aperture_sizes = 4, - .needs_scratch_page = TRUE, + .needs_scratch_page = true, .configure = intel_i830_configure, .fetch_size = intel_i830_fetch_size, .cleanup = intel_i830_cleanup, @@ -1876,7 +1932,7 @@ static const struct agp_bridge_driver intel_915_driver = { .aperture_sizes = intel_i830_sizes, .size_type = FIXED_APER_SIZE, .num_aperture_sizes = 4, - .needs_scratch_page = TRUE, + .needs_scratch_page = true, .configure = intel_i915_configure, .fetch_size = intel_i9xx_fetch_size, .cleanup = intel_i915_cleanup, @@ -1898,28 +1954,28 @@ static const struct agp_bridge_driver intel_915_driver = { }; static const struct agp_bridge_driver intel_i965_driver = { - .owner = THIS_MODULE, - .aperture_sizes = intel_i830_sizes, - .size_type = FIXED_APER_SIZE, - .num_aperture_sizes = 4, - .needs_scratch_page = TRUE, - .configure = intel_i915_configure, - .fetch_size = intel_i9xx_fetch_size, - .cleanup = intel_i915_cleanup, - .tlb_flush = intel_i810_tlbflush, - .mask_memory = intel_i965_mask_memory, - .masks = intel_i810_masks, - .agp_enable = intel_i810_agp_enable, - .cache_flush = global_cache_flush, - .create_gatt_table = intel_i965_create_gatt_table, - .free_gatt_table = intel_i830_free_gatt_table, - .insert_memory = intel_i915_insert_entries, - .remove_memory = intel_i915_remove_entries, - .alloc_by_type = intel_i830_alloc_by_type, - .free_by_type = intel_i810_free_by_type, - .agp_alloc_page = agp_generic_alloc_page, - .agp_destroy_page = agp_generic_destroy_page, - .agp_type_to_mask_type = intel_i830_type_to_mask_type, + .owner = THIS_MODULE, + .aperture_sizes = intel_i830_sizes, + .size_type = FIXED_APER_SIZE, + .num_aperture_sizes = 4, + .needs_scratch_page = true, + .configure = intel_i915_configure, + .fetch_size = intel_i9xx_fetch_size, + .cleanup = intel_i915_cleanup, + .tlb_flush = intel_i810_tlbflush, + .mask_memory = intel_i965_mask_memory, + .masks = intel_i810_masks, + .agp_enable = intel_i810_agp_enable, + .cache_flush = global_cache_flush, + .create_gatt_table = intel_i965_create_gatt_table, + .free_gatt_table = intel_i830_free_gatt_table, + .insert_memory = intel_i915_insert_entries, + .remove_memory = intel_i915_remove_entries, + .alloc_by_type = intel_i830_alloc_by_type, + .free_by_type = intel_i810_free_by_type, + .agp_alloc_page = agp_generic_alloc_page, + .agp_destroy_page = agp_generic_destroy_page, + .agp_type_to_mask_type = intel_i830_type_to_mask_type, .chipset_flush = intel_i915_chipset_flush, }; @@ -1948,28 +2004,28 @@ static const struct agp_bridge_driver intel_7505_driver = { }; static const struct agp_bridge_driver intel_g33_driver = { - .owner = THIS_MODULE, - .aperture_sizes = intel_i830_sizes, - .size_type = FIXED_APER_SIZE, - .num_aperture_sizes = 4, - .needs_scratch_page = TRUE, - .configure = intel_i915_configure, - .fetch_size = intel_i9xx_fetch_size, - .cleanup = intel_i915_cleanup, - .tlb_flush = intel_i810_tlbflush, - .mask_memory = intel_i965_mask_memory, - .masks = intel_i810_masks, - .agp_enable = intel_i810_agp_enable, - .cache_flush = global_cache_flush, - .create_gatt_table = intel_i915_create_gatt_table, - .free_gatt_table = intel_i830_free_gatt_table, - .insert_memory = intel_i915_insert_entries, - .remove_memory = intel_i915_remove_entries, - .alloc_by_type = intel_i830_alloc_by_type, - .free_by_type = intel_i810_free_by_type, - .agp_alloc_page = agp_generic_alloc_page, - .agp_destroy_page = agp_generic_destroy_page, - .agp_type_to_mask_type = intel_i830_type_to_mask_type, + .owner = THIS_MODULE, + .aperture_sizes = intel_i830_sizes, + .size_type = FIXED_APER_SIZE, + .num_aperture_sizes = 4, + .needs_scratch_page = true, + .configure = intel_i915_configure, + .fetch_size = intel_i9xx_fetch_size, + .cleanup = intel_i915_cleanup, + .tlb_flush = intel_i810_tlbflush, + .mask_memory = intel_i965_mask_memory, + .masks = intel_i810_masks, + .agp_enable = intel_i810_agp_enable, + .cache_flush = global_cache_flush, + .create_gatt_table = intel_i915_create_gatt_table, + .free_gatt_table = intel_i830_free_gatt_table, + .insert_memory = intel_i915_insert_entries, + .remove_memory = intel_i915_remove_entries, + .alloc_by_type = intel_i830_alloc_by_type, + .free_by_type = intel_i810_free_by_type, + .agp_alloc_page = agp_generic_alloc_page, + .agp_destroy_page = agp_generic_destroy_page, + .agp_type_to_mask_type = intel_i830_type_to_mask_type, .chipset_flush = intel_i915_chipset_flush, }; @@ -2063,6 +2119,12 @@ static const struct intel_driver_description { NULL, &intel_g33_driver }, { PCI_DEVICE_ID_INTEL_IGD_HB, PCI_DEVICE_ID_INTEL_IGD_IG, 0, "Intel Integrated Graphics Device", NULL, &intel_i965_driver }, + { PCI_DEVICE_ID_INTEL_IGD_E_HB, PCI_DEVICE_ID_INTEL_IGD_E_IG, 0, + "Intel Integrated Graphics Device", NULL, &intel_i965_driver }, + { PCI_DEVICE_ID_INTEL_Q45_HB, PCI_DEVICE_ID_INTEL_Q45_IG, 0, + "Q45/Q43", NULL, &intel_i965_driver }, + { PCI_DEVICE_ID_INTEL_G45_HB, PCI_DEVICE_ID_INTEL_G45_IG, 0, + "G45/G43", NULL, &intel_i965_driver }, { 0, 0, 0, NULL, NULL, NULL } }; @@ -2254,6 +2316,9 @@ static struct pci_device_id agp_intel_pci_table[] = { ID(PCI_DEVICE_ID_INTEL_Q35_HB), ID(PCI_DEVICE_ID_INTEL_Q33_HB), ID(PCI_DEVICE_ID_INTEL_IGD_HB), + ID(PCI_DEVICE_ID_INTEL_IGD_E_HB), + ID(PCI_DEVICE_ID_INTEL_Q45_HB), + ID(PCI_DEVICE_ID_INTEL_G45_HB), { } }; diff --git a/drivers/char/agp/nvidia-agp.c b/drivers/char/agp/nvidia-agp.c index 225ed2a53d4..eaceb61ba2d 100644 --- a/drivers/char/agp/nvidia-agp.c +++ b/drivers/char/agp/nvidia-agp.c @@ -214,9 +214,9 @@ static int nvidia_insert_memory(struct agp_memory *mem, off_t pg_start, int type return -EBUSY; } - if (mem->is_flushed == FALSE) { + if (!mem->is_flushed) { global_cache_flush(); - mem->is_flushed = TRUE; + mem->is_flushed = true; } for (i = 0, j = pg_start; i < mem->page_count; i++, j++) { writel(agp_bridge->driver->mask_memory(agp_bridge, diff --git a/drivers/char/agp/parisc-agp.c b/drivers/char/agp/parisc-agp.c index 2939e3570f9..8c42dcc5958 100644 --- a/drivers/char/agp/parisc-agp.c +++ b/drivers/char/agp/parisc-agp.c @@ -141,9 +141,9 @@ parisc_agp_insert_memory(struct agp_memory *mem, off_t pg_start, int type) j++; } - if (mem->is_flushed == FALSE) { + if (!mem->is_flushed) { global_cache_flush(); - mem->is_flushed = TRUE; + mem->is_flushed = true; } for (i = 0, j = io_pg_start; i < mem->page_count; i++) { @@ -226,7 +226,7 @@ static const struct agp_bridge_driver parisc_agp_driver = { .agp_alloc_page = agp_generic_alloc_page, .agp_destroy_page = agp_generic_destroy_page, .agp_type_to_mask_type = agp_generic_type_to_mask_type, - .cant_use_aperture = 1, + .cant_use_aperture = true, }; static int __init diff --git a/drivers/char/agp/sgi-agp.c b/drivers/char/agp/sgi-agp.c index 98cf8abb3e5..b972d83bb1b 100644 --- a/drivers/char/agp/sgi-agp.c +++ b/drivers/char/agp/sgi-agp.c @@ -182,9 +182,9 @@ static int sgi_tioca_insert_memory(struct agp_memory *mem, off_t pg_start, j++; } - if (mem->is_flushed == FALSE) { + if (!mem->is_flushed) { bridge->driver->cache_flush(); - mem->is_flushed = TRUE; + mem->is_flushed = true; } for (i = 0, j = pg_start; i < mem->page_count; i++, j++) { @@ -264,8 +264,8 @@ const struct agp_bridge_driver sgi_tioca_driver = { .agp_alloc_page = sgi_tioca_alloc_page, .agp_destroy_page = agp_generic_destroy_page, .agp_type_to_mask_type = agp_generic_type_to_mask_type, - .cant_use_aperture = 1, - .needs_scratch_page = 0, + .cant_use_aperture = true, + .needs_scratch_page = false, .num_aperture_sizes = 1, }; diff --git a/drivers/char/agp/sworks-agp.c b/drivers/char/agp/sworks-agp.c index e08934e58f3..0e054c13449 100644 --- a/drivers/char/agp/sworks-agp.c +++ b/drivers/char/agp/sworks-agp.c @@ -339,9 +339,9 @@ static int serverworks_insert_memory(struct agp_memory *mem, j++; } - if (mem->is_flushed == FALSE) { + if (!mem->is_flushed) { global_cache_flush(); - mem->is_flushed = TRUE; + mem->is_flushed = true; } for (i = 0, j = pg_start; i < mem->page_count; i++, j++) { @@ -412,7 +412,7 @@ static void serverworks_agp_enable(struct agp_bridge_data *bridge, u32 mode) bridge->capndx + PCI_AGP_COMMAND, command); - agp_device_command(command, 0); + agp_device_command(command, false); } static const struct agp_bridge_driver sworks_driver = { diff --git a/drivers/char/agp/uninorth-agp.c b/drivers/char/agp/uninorth-agp.c index 42c0a600b1a..d2fa3cfca02 100644 --- a/drivers/char/agp/uninorth-agp.c +++ b/drivers/char/agp/uninorth-agp.c @@ -281,10 +281,10 @@ static void uninorth_agp_enable(struct agp_bridge_data *bridge, u32 mode) if (uninorth_rev >= 0x30) { /* This is an AGP V3 */ - agp_device_command(command, (status & AGPSTAT_MODE_3_0)); + agp_device_command(command, (status & AGPSTAT_MODE_3_0) != 0); } else { /* AGP V2 */ - agp_device_command(command, 0); + agp_device_command(command, false); } uninorth_tlbflush(NULL); @@ -511,7 +511,7 @@ const struct agp_bridge_driver uninorth_agp_driver = { .agp_alloc_page = agp_generic_alloc_page, .agp_destroy_page = agp_generic_destroy_page, .agp_type_to_mask_type = agp_generic_type_to_mask_type, - .cant_use_aperture = 1, + .cant_use_aperture = true, }; const struct agp_bridge_driver u3_agp_driver = { @@ -536,8 +536,8 @@ const struct agp_bridge_driver u3_agp_driver = { .agp_alloc_page = agp_generic_alloc_page, .agp_destroy_page = agp_generic_destroy_page, .agp_type_to_mask_type = agp_generic_type_to_mask_type, - .cant_use_aperture = 1, - .needs_scratch_page = 1, + .cant_use_aperture = true, + .needs_scratch_page = true, }; static struct agp_device_ids uninorth_agp_device_ids[] __devinitdata = { diff --git a/drivers/char/agp/via-agp.c b/drivers/char/agp/via-agp.c index 0ecc54d327b..7b36476dff4 100644 --- a/drivers/char/agp/via-agp.c +++ b/drivers/char/agp/via-agp.c @@ -389,11 +389,20 @@ static struct agp_device_ids via_agp_device_ids[] __devinitdata = .device_id = PCI_DEVICE_ID_VIA_VT3324, .chipset_name = "CX700", }, - /* VT3336 */ + /* VT3336 - this is a chipset for AMD Athlon/K8 CPU. Due to K8's unique + * architecture, the AGP resource and behavior are different from + * the traditional AGP which resides only in chipset. AGP is used + * by 3D driver which wasn't available for the VT3336 and VT3364 + * generation until now. Unfortunately, by testing, VT3364 works + * but VT3336 doesn't. - explaination from via, just leave this as + * as a placeholder to avoid future patches adding it back in. + */ +#if 0 { .device_id = PCI_DEVICE_ID_VIA_VT3336, .chipset_name = "VT3336", }, +#endif /* P4M890 */ { .device_id = PCI_DEVICE_ID_VIA_P4M890, @@ -546,8 +555,8 @@ static const struct pci_device_id agp_via_pci_table[] = { ID(PCI_DEVICE_ID_VIA_3296_0), ID(PCI_DEVICE_ID_VIA_P4M800CE), ID(PCI_DEVICE_ID_VIA_VT3324), - ID(PCI_DEVICE_ID_VIA_VT3336), ID(PCI_DEVICE_ID_VIA_P4M890), + ID(PCI_DEVICE_ID_VIA_VT3364), { } }; diff --git a/drivers/char/generic_nvram.c b/drivers/char/generic_nvram.c index 2398e864c28..a00869c650d 100644 --- a/drivers/char/generic_nvram.c +++ b/drivers/char/generic_nvram.c @@ -133,7 +133,7 @@ static struct miscdevice nvram_dev = { int __init nvram_init(void) { - printk(KERN_INFO "Macintosh non-volatile memory driver v%s\n", + printk(KERN_INFO "Generic non-volatile memory driver v%s\n", NVRAM_VERSION); return misc_register(&nvram_dev); } diff --git a/drivers/char/hw_random/intel-rng.c b/drivers/char/hw_random/intel-rng.c index 5cc651ef75e..27fdc086649 100644 --- a/drivers/char/hw_random/intel-rng.c +++ b/drivers/char/hw_random/intel-rng.c @@ -273,7 +273,7 @@ static int __init intel_rng_hw_init(void *_intel_rng_hw) if (mfc != INTEL_FWH_MANUFACTURER_CODE || (dvc != INTEL_FWH_DEVICE_CODE_8M && dvc != INTEL_FWH_DEVICE_CODE_4M)) { - printk(KERN_ERR PFX "FWH not detected\n"); + printk(KERN_NOTICE PFX "FWH not detected\n"); return -ENODEV; } diff --git a/drivers/char/keyboard.c b/drivers/char/keyboard.c index 7f7e798c138..d9a0a53c842 100644 --- a/drivers/char/keyboard.c +++ b/drivers/char/keyboard.c @@ -677,12 +677,7 @@ static void k_deadunicode(struct vc_data *vc, unsigned int value, char up_flag) static void k_self(struct vc_data *vc, unsigned char value, char up_flag) { - unsigned int uni; - if (kbd->kbdmode == VC_UNICODE) - uni = value; - else - uni = conv_8bit_to_uni(value); - k_unicode(vc, uni, up_flag); + k_unicode(vc, conv_8bit_to_uni(value), up_flag); } static void k_dead2(struct vc_data *vc, unsigned char value, char up_flag) diff --git a/drivers/ide/ide-generic.c b/drivers/ide/ide-generic.c index 9134488ac04..2d92214096a 100644 --- a/drivers/ide/ide-generic.c +++ b/drivers/ide/ide-generic.c @@ -22,6 +22,10 @@ #define DRV_NAME "ide_generic" +static int probe_mask = 0x03; +module_param(probe_mask, int, 0); +MODULE_PARM_DESC(probe_mask, "probe mask for legacy ISA IDE ports"); + static ssize_t store_add(struct class *cls, const char *buf, size_t n) { ide_hwif_t *hwif; @@ -89,6 +93,9 @@ static int __init ide_generic_init(void) u8 idx[MAX_HWIFS]; int i; + printk(KERN_INFO DRV_NAME ": please use \"probe_mask=0x3f\" module " + "parameter for probing all legacy ISA IDE ports\n"); + for (i = 0; i < MAX_HWIFS; i++) { ide_hwif_t *hwif; unsigned long io_addr = ide_default_io_base(i); @@ -96,7 +103,7 @@ static int __init ide_generic_init(void) idx[i] = 0xff; - if (io_addr) { + if ((probe_mask & (1 << i)) && io_addr) { if (!request_region(io_addr, 8, DRV_NAME)) { printk(KERN_ERR "%s: I/O resource 0x%lX-0x%lX " "not free.\n", diff --git a/drivers/ide/legacy/ide-cs.c b/drivers/ide/legacy/ide-cs.c index aa2ea3deac8..f633b6b3c7f 100644 --- a/drivers/ide/legacy/ide-cs.c +++ b/drivers/ide/legacy/ide-cs.c @@ -135,13 +135,17 @@ static void ide_detach(struct pcmcia_device *link) { ide_info_t *info = link->priv; ide_hwif_t *hwif = info->hwif; + unsigned long data_addr, ctl_addr; DEBUG(0, "ide_detach(0x%p)\n", link); + data_addr = hwif->io_ports.data_addr; + ctl_addr = hwif->io_ports.ctl_addr; + ide_release(link); - release_region(hwif->io_ports.ctl_addr, 1); - release_region(hwif->io_ports.data_addr, 8); + release_region(ctl_addr, 1); + release_region(data_addr, 8); kfree(info); } /* ide_detach */ @@ -194,6 +198,16 @@ static ide_hwif_t *idecs_register(unsigned long io, unsigned long ctl, if (hwif->present) return hwif; + /* retry registration in case device is still spinning up */ + for (i = 0; i < 10; i++) { + msleep(100); + ide_port_scan(hwif); + if (hwif->present) + return hwif; + } + + return hwif; + out_release: release_region(ctl, 1); release_region(io, 8); @@ -222,7 +236,7 @@ static int ide_config(struct pcmcia_device *link) cistpl_cftable_entry_t dflt; } *stk = NULL; cistpl_cftable_entry_t *cfg; - int i, pass, last_ret = 0, last_fn = 0, is_kme = 0; + int pass, last_ret = 0, last_fn = 0, is_kme = 0; unsigned long io_base, ctl_base; ide_hwif_t *hwif; @@ -319,30 +333,15 @@ static int ide_config(struct pcmcia_device *link) if (is_kme) outb(0x81, ctl_base+1); - /* retry registration in case device is still spinning up */ - for (i = 0; i < 10; i++) { - hwif = idecs_register(io_base, ctl_base, link->irq.AssignedIRQ, link); - if (hwif) - break; - if (link->io.NumPorts1 == 0x20) { + hwif = idecs_register(io_base, ctl_base, link->irq.AssignedIRQ, link); + if (hwif == NULL && link->io.NumPorts1 == 0x20) { outb(0x02, ctl_base + 0x10); hwif = idecs_register(io_base + 0x10, ctl_base + 0x10, link->irq.AssignedIRQ, link); - if (hwif) { - io_base += 0x10; - ctl_base += 0x10; - break; - } - } - msleep(100); } - if (hwif == NULL) { - printk(KERN_NOTICE "ide-cs: ide_register() at 0x%3lx & 0x%3lx" - ", irq %u failed\n", io_base, ctl_base, - link->irq.AssignedIRQ); + if (hwif == NULL) goto failed; - } info->ndev = 1; sprintf(info->node.dev_name, "hd%c", 'a' + hwif->index * 2); diff --git a/drivers/ide/pci/opti621.c b/drivers/ide/pci/opti621.c index 6e99080497b..725c80508d9 100644 --- a/drivers/ide/pci/opti621.c +++ b/drivers/ide/pci/opti621.c @@ -81,8 +81,6 @@ * 0.5 doesn't work. */ -#define OPTI621_DEBUG /* define for debug messages */ - #include <linux/types.h> #include <linux/module.h> #include <linux/kernel.h> @@ -92,28 +90,6 @@ #include <asm/io.h> -//#define OPTI621_MAX_PIO 3 -/* In fact, I do not have any PIO 4 drive - * (address: 25 ns, data: 70 ns, recovery: 35 ns), - * but OPTi 82C621 is programmable and it can do (minimal values): - * on 40MHz PCI bus (pulse 25 ns): - * address: 25 ns, data: 25 ns, recovery: 50 ns; - * on 20MHz PCI bus (pulse 50 ns): - * address: 50 ns, data: 50 ns, recovery: 100 ns. - */ - -/* #define READ_PREFETCH 0 */ -/* Uncomment for disable read prefetch. - * There is some readprefetch capatibility in hdparm, - * but when I type hdparm -P 1 /dev/hda, I got errors - * and till reset drive is inaccessible. - * This (hw) read prefetch is safe on my drive. - */ - -#ifndef READ_PREFETCH -#define READ_PREFETCH 0x40 /* read prefetch is enabled */ -#endif /* else read prefetch is disabled */ - #define READ_REG 0 /* index of Read cycle timing register */ #define WRITE_REG 1 /* index of Write cycle timing register */ #define CNTRL_REG 3 /* index of Control register */ @@ -122,51 +98,8 @@ static int reg_base; -#define PIO_NOT_EXIST 254 -#define PIO_DONT_KNOW 255 - static DEFINE_SPINLOCK(opti621_lock); -/* there are stored pio numbers from other calls of opti621_set_pio_mode */ -static void compute_pios(ide_drive_t *drive, const u8 pio) -/* Store values into drive->drive_data - * second_contr - 0 for primary controller, 1 for secondary - * slave_drive - 0 -> pio is for master, 1 -> pio is for slave - * pio - PIO mode for selected drive (for other we don't know) - */ -{ - int d; - ide_hwif_t *hwif = HWIF(drive); - - drive->drive_data = pio; - - for (d = 0; d < 2; ++d) { - drive = &hwif->drives[d]; - if (drive->present) { - if (drive->drive_data == PIO_DONT_KNOW) - drive->drive_data = ide_get_best_pio_mode(drive, 255, 3); -#ifdef OPTI621_DEBUG - printk("%s: Selected PIO mode %d\n", - drive->name, drive->drive_data); -#endif - } else { - drive->drive_data = PIO_NOT_EXIST; - } - } -} - -static int cmpt_clk(int time, int bus_speed) -/* Returns (rounded up) time in clocks for time in ns, - * with bus_speed in MHz. - * Example: bus_speed = 40 MHz, time = 80 ns - * 1000/40 = 25 ns (clk value), - * 80/25 = 3.2, rounded up to 4 (I hope ;-)). - * Use idebus=xx to select right frequency. - */ -{ - return ((time*bus_speed+999)/1000); -} - /* Write value to register reg, base of register * is at reg_base (0x1f0 primary, 0x170 secondary, * if not changed by PCI configuration). @@ -199,83 +132,29 @@ static u8 read_reg(int reg) return ret; } -typedef struct pio_clocks_s { - int address_time; /* Address setup (clocks) */ - int data_time; /* Active/data pulse (clocks) */ - int recovery_time; /* Recovery time (clocks) */ -} pio_clocks_t; - -static void compute_clocks(int pio, pio_clocks_t *clks) -{ - if (pio != PIO_NOT_EXIST) { - int adr_setup, data_pls; - int bus_speed = ide_pci_clk ? ide_pci_clk : system_bus_clock(); - - adr_setup = ide_pio_timings[pio].setup_time; - data_pls = ide_pio_timings[pio].active_time; - clks->address_time = cmpt_clk(adr_setup, bus_speed); - clks->data_time = cmpt_clk(data_pls, bus_speed); - clks->recovery_time = cmpt_clk(ide_pio_timings[pio].cycle_time - - adr_setup-data_pls, bus_speed); - if (clks->address_time < 1) - clks->address_time = 1; - if (clks->address_time > 4) - clks->address_time = 4; - if (clks->data_time < 1) - clks->data_time = 1; - if (clks->data_time > 16) - clks->data_time = 16; - if (clks->recovery_time < 2) - clks->recovery_time = 2; - if (clks->recovery_time > 17) - clks->recovery_time = 17; - } else { - clks->address_time = 1; - clks->data_time = 1; - clks->recovery_time = 2; - /* minimal values */ - } -} - static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio) { - /* primary and secondary drives share some registers, - * so we have to program both drives - */ + ide_hwif_t *hwif = drive->hwif; + ide_drive_t *pair = ide_get_paired_drive(drive); unsigned long flags; - u8 pio1 = 0, pio2 = 0; - pio_clocks_t first, second; - int ax, drdy; - u8 cycle1, cycle2, misc; - ide_hwif_t *hwif = HWIF(drive); - - /* sets drive->drive_data for both drives */ - compute_pios(drive, pio); - pio1 = hwif->drives[0].drive_data; - pio2 = hwif->drives[1].drive_data; - - compute_clocks(pio1, &first); - compute_clocks(pio2, &second); - - /* ax = max(a1,a2) */ - ax = (first.address_time < second.address_time) ? second.address_time : first.address_time; - - drdy = 2; /* DRDY is default 2 (by OPTi Databook) */ - - cycle1 = ((first.data_time-1)<<4) | (first.recovery_time-2); - cycle2 = ((second.data_time-1)<<4) | (second.recovery_time-2); - misc = READ_PREFETCH | ((ax-1)<<4) | ((drdy-2)<<1); - -#ifdef OPTI621_DEBUG - printk("%s: master: address: %d, data: %d, " - "recovery: %d, drdy: %d [clk]\n", - hwif->name, ax, first.data_time, - first.recovery_time, drdy); - printk("%s: slave: address: %d, data: %d, " - "recovery: %d, drdy: %d [clk]\n", - hwif->name, ax, second.data_time, - second.recovery_time, drdy); -#endif + u8 tim, misc, addr_pio = pio, clk; + + /* DRDY is default 2 (by OPTi Databook) */ + static const u8 addr_timings[2][5] = { + { 0x20, 0x10, 0x00, 0x00, 0x00 }, /* 33 MHz */ + { 0x10, 0x10, 0x00, 0x00, 0x00 }, /* 25 MHz */ + }; + static const u8 data_rec_timings[2][5] = { + { 0x5b, 0x45, 0x32, 0x21, 0x20 }, /* 33 MHz */ + { 0x48, 0x34, 0x21, 0x10, 0x10 } /* 25 MHz */ + }; + + drive->drive_data = XFER_PIO_0 + pio; + + if (pair->present) { + if (pair->drive_data && pair->drive_data < drive->drive_data) + addr_pio = pair->drive_data - XFER_PIO_0; + } spin_lock_irqsave(&opti621_lock, flags); @@ -289,24 +168,21 @@ static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio) (void)inb(reg_base + CNTRL_REG); /* if reads 0xc0, no interface exist? */ read_reg(CNTRL_REG); - /* read version, probably 0 */ - read_reg(STRAP_REG); - /* program primary drive */ - /* select Index-0 for Register-A */ - write_reg(0, MISC_REG); - /* set read cycle timings */ - write_reg(cycle1, READ_REG); - /* set write cycle timings */ - write_reg(cycle1, WRITE_REG); + /* check CLK speed */ + clk = read_reg(STRAP_REG) & 1; + + printk(KERN_INFO "%s: CLK = %d MHz\n", hwif->name, clk ? 25 : 33); - /* program secondary drive */ - /* select Index-1 for Register-B */ - write_reg(1, MISC_REG); + tim = data_rec_timings[clk][pio]; + misc = addr_timings[clk][addr_pio]; + + /* select Index-0/1 for Register-A/B */ + write_reg(drive->select.b.unit, MISC_REG); /* set read cycle timings */ - write_reg(cycle2, READ_REG); + write_reg(tim, READ_REG); /* set write cycle timings */ - write_reg(cycle2, WRITE_REG); + write_reg(tim, WRITE_REG); /* use Register-A for drive 0 */ /* use Register-B for drive 1 */ @@ -319,45 +195,26 @@ static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio) spin_unlock_irqrestore(&opti621_lock, flags); } -static void __devinit opti621_port_init_devs(ide_hwif_t *hwif) -{ - hwif->drives[0].drive_data = PIO_DONT_KNOW; - hwif->drives[1].drive_data = PIO_DONT_KNOW; -} - static const struct ide_port_ops opti621_port_ops = { - .port_init_devs = opti621_port_init_devs, .set_pio_mode = opti621_set_pio_mode, }; -static const struct ide_port_info opti621_chipsets[] __devinitdata = { - { /* 0 */ - .name = "OPTI621", - .enablebits = { {0x45, 0x80, 0x00}, {0x40, 0x08, 0x00} }, - .port_ops = &opti621_port_ops, - .host_flags = IDE_HFLAG_TRUST_BIOS_FOR_DMA, - .pio_mask = ATA_PIO3, - .swdma_mask = ATA_SWDMA2, - .mwdma_mask = ATA_MWDMA2, - }, { /* 1 */ - .name = "OPTI621X", - .enablebits = { {0x45, 0x80, 0x00}, {0x40, 0x08, 0x00} }, - .port_ops = &opti621_port_ops, - .host_flags = IDE_HFLAG_TRUST_BIOS_FOR_DMA, - .pio_mask = ATA_PIO3, - .swdma_mask = ATA_SWDMA2, - .mwdma_mask = ATA_MWDMA2, - } +static const struct ide_port_info opti621_chipset __devinitdata = { + .name = "OPTI621/X", + .enablebits = { {0x45, 0x80, 0x00}, {0x40, 0x08, 0x00} }, + .port_ops = &opti621_port_ops, + .host_flags = IDE_HFLAG_NO_DMA, + .pio_mask = ATA_PIO4, }; static int __devinit opti621_init_one(struct pci_dev *dev, const struct pci_device_id *id) { - return ide_setup_pci_device(dev, &opti621_chipsets[id->driver_data]); + return ide_setup_pci_device(dev, &opti621_chipset); } static const struct pci_device_id opti621_pci_tbl[] = { { PCI_VDEVICE(OPTI, PCI_DEVICE_ID_OPTI_82C621), 0 }, - { PCI_VDEVICE(OPTI, PCI_DEVICE_ID_OPTI_82C825), 1 }, + { PCI_VDEVICE(OPTI, PCI_DEVICE_ID_OPTI_82C825), 0 }, { 0, }, }; MODULE_DEVICE_TABLE(pci, opti621_pci_tbl); diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c index 48aa019127b..ba2d5872796 100644 --- a/drivers/ide/ppc/pmac.c +++ b/drivers/ide/ppc/pmac.c @@ -59,7 +59,6 @@ typedef struct pmac_ide_hwif { int irq; int kind; int aapl_bus_id; - unsigned cable_80 : 1; unsigned mediabay : 1; unsigned broken_dma : 1; unsigned broken_dma_warn : 1; @@ -918,10 +917,40 @@ pmac_ide_do_resume(ide_hwif_t *hwif) return 0; } +static u8 pmac_ide_cable_detect(ide_hwif_t *hwif) +{ + pmac_ide_hwif_t *pmif = (pmac_ide_hwif_t *)ide_get_hwifdata(hwif); + struct device_node *np = pmif->node; + const char *cable = of_get_property(np, "cable-type", NULL); + + /* Get cable type from device-tree. */ + if (cable && !strncmp(cable, "80-", 3)) + return ATA_CBL_PATA80; + + /* + * G5's seem to have incorrect cable type in device-tree. + * Let's assume they have a 80 conductor cable, this seem + * to be always the case unless the user mucked around. + */ + if (of_device_is_compatible(np, "K2-UATA") || + of_device_is_compatible(np, "shasta-ata")) + return ATA_CBL_PATA80; + + return ATA_CBL_PATA40; +} + static const struct ide_port_ops pmac_ide_ata6_port_ops = { .set_pio_mode = pmac_ide_set_pio_mode, .set_dma_mode = pmac_ide_set_dma_mode, .selectproc = pmac_ide_kauai_selectproc, + .cable_detect = pmac_ide_cable_detect, +}; + +static const struct ide_port_ops pmac_ide_ata4_port_ops = { + .set_pio_mode = pmac_ide_set_pio_mode, + .set_dma_mode = pmac_ide_set_dma_mode, + .selectproc = pmac_ide_selectproc, + .cable_detect = pmac_ide_cable_detect, }; static const struct ide_port_ops pmac_ide_port_ops = { @@ -949,10 +978,7 @@ static const struct ide_port_info pmac_port_info = { /* * Setup, register & probe an IDE channel driven by this driver, this is - * called by one of the 2 probe functions (macio or PCI). Note that a channel - * that ends up beeing free of any device is not kept around by this driver - * (it is kept in 2.4). This introduce an interface numbering change on some - * rare machines unfortunately, but it's better this way. + * called by one of the 2 probe functions (macio or PCI). */ static int __devinit pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif, hw_regs_t *hw) @@ -962,7 +988,6 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif, hw_regs_t *hw) u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; struct ide_port_info d = pmac_port_info; - pmif->cable_80 = 0; pmif->broken_dma = pmif->broken_dma_warn = 0; if (of_device_is_compatible(np, "shasta-ata")) { pmif->kind = controller_sh_ata6; @@ -979,6 +1004,7 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif, hw_regs_t *hw) } else if (of_device_is_compatible(np, "keylargo-ata")) { if (strcmp(np->name, "ata-4") == 0) { pmif->kind = controller_kl_ata4; + d.port_ops = &pmac_ide_ata4_port_ops; d.udma_mask = ATA_UDMA4; } else pmif->kind = controller_kl_ata3; @@ -992,22 +1018,6 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif, hw_regs_t *hw) bidp = of_get_property(np, "AAPL,bus-id", NULL); pmif->aapl_bus_id = bidp ? *bidp : 0; - /* Get cable type from device-tree */ - if (pmif->kind == controller_kl_ata4 || pmif->kind == controller_un_ata6 - || pmif->kind == controller_k2_ata6 - || pmif->kind == controller_sh_ata6) { - const char* cable = of_get_property(np, "cable-type", NULL); - if (cable && !strncmp(cable, "80-", 3)) - pmif->cable_80 = 1; - } - /* G5's seem to have incorrect cable type in device-tree. Let's assume - * they have a 80 conductor cable, this seem to be always the case unless - * the user mucked around - */ - if (of_device_is_compatible(np, "K2-UATA") || - of_device_is_compatible(np, "shasta-ata")) - pmif->cable_80 = 1; - /* On Kauai-type controllers, we make sure the FCR is correct */ if (pmif->kauai_fcr) writel(KAUAI_FCR_UATA_MAGIC | @@ -1053,7 +1063,6 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif, hw_regs_t *hw) hwif->hwif_data = pmif; ide_init_port_hw(hwif, hw); - hwif->cbl = pmif->cable_80 ? ATA_CBL_PATA80 : ATA_CBL_PATA40; printk(KERN_INFO "ide%d: Found Apple %s controller, bus ID %d%s, irq %d\n", hwif->index, model_name[pmif->kind], pmif->aapl_bus_id, @@ -1070,11 +1079,6 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif, hw_regs_t *hw) } } -#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC - if (pmif->cable_80 == 0) - d.udma_mask &= ATA_UDMA2; -#endif - idx[0] = hwif->index; ide_device_add(idx, &d); diff --git a/drivers/infiniband/core/uverbs_main.c b/drivers/infiniband/core/uverbs_main.c index f806da184b5..caed42bf7ef 100644 --- a/drivers/infiniband/core/uverbs_main.c +++ b/drivers/infiniband/core/uverbs_main.c @@ -423,7 +423,7 @@ static void ib_uverbs_async_handler(struct ib_uverbs_file *file, unsigned long flags; spin_lock_irqsave(&file->async_file->lock, flags); - if (!file->async_file->is_closed) { + if (file->async_file->is_closed) { spin_unlock_irqrestore(&file->async_file->lock, flags); return; } diff --git a/drivers/infiniband/hw/nes/nes_verbs.c b/drivers/infiniband/hw/nes/nes_verbs.c index 99b3c4ae86e..d617da9bd35 100644 --- a/drivers/infiniband/hw/nes/nes_verbs.c +++ b/drivers/infiniband/hw/nes/nes_verbs.c @@ -2456,10 +2456,8 @@ static struct ib_mr *nes_reg_user_mr(struct ib_pd *pd, u64 start, u64 length, if ((page_count!=0)&&(page_count<<12)-(region->offset&(4096-1))>=region->length) goto enough_pages; if ((page_count&0x01FF) == 0) { - if (page_count>(1024*512)) { + if (page_count >= 1024 * 512) { ib_umem_release(region); - pci_free_consistent(nesdev->pcidev, 4096, vpbl.pbl_vbase, - vpbl.pbl_pbase); nes_free_resource(nesadapter, nesadapter->allocated_mrs, stag_index); kfree(nesmr); diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index 3ad8bd9f754..432699d61c5 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -15,7 +15,6 @@ if INPUT_MISC config INPUT_PCSPKR tristate "PC Speaker support" depends on PCSPKR_PLATFORM - depends on SND_PCSP=n help Say Y here if you want the standard PC Speaker to be used for bells and whistles. diff --git a/drivers/input/mouse/appletouch.c b/drivers/input/mouse/appletouch.c index 8dd3942f302..ce6fdec19e1 100644 --- a/drivers/input/mouse/appletouch.c +++ b/drivers/input/mouse/appletouch.c @@ -589,6 +589,21 @@ static void atp_close(struct input_dev *input) dev->open = 0; } +static int atp_handle_geyser(struct atp *dev) +{ + struct usb_device *udev = dev->udev; + + if (!atp_is_fountain(dev)) { + /* switch to raw sensor mode */ + if (atp_geyser_init(udev)) + return -EIO; + + printk(KERN_INFO "appletouch: Geyser mode initialized.\n"); + } + + return 0; +} + static int atp_probe(struct usb_interface *iface, const struct usb_device_id *id) { struct atp *dev; @@ -633,14 +648,6 @@ static int atp_probe(struct usb_interface *iface, const struct usb_device_id *id else dev->datalen = 81; - if (!atp_is_fountain(dev)) { - /* switch to raw sensor mode */ - if (atp_geyser_init(udev)) - goto err_free_devs; - - printk(KERN_INFO "appletouch: Geyser mode initialized.\n"); - } - dev->urb = usb_alloc_urb(0, GFP_KERNEL); if (!dev->urb) goto err_free_devs; @@ -654,6 +661,10 @@ static int atp_probe(struct usb_interface *iface, const struct usb_device_id *id usb_rcvintpipe(udev, int_in_endpointAddr), dev->data, dev->datalen, atp_complete, dev, 1); + error = atp_handle_geyser(dev); + if (error) + goto err_free_buffer; + usb_make_path(udev, dev->phys, sizeof(dev->phys)); strlcat(dev->phys, "/input0", sizeof(dev->phys)); @@ -744,6 +755,20 @@ static void atp_disconnect(struct usb_interface *iface) printk(KERN_INFO "input: appletouch disconnected\n"); } +static int atp_recover(struct atp *dev) +{ + int error; + + error = atp_handle_geyser(dev); + if (error) + return error; + + if (dev->open && usb_submit_urb(dev->urb, GFP_ATOMIC)) + return -EIO; + + return 0; +} + static int atp_suspend(struct usb_interface *iface, pm_message_t message) { struct atp *dev = usb_get_intfdata(iface); @@ -764,12 +789,20 @@ static int atp_resume(struct usb_interface *iface) return 0; } +static int atp_reset_resume(struct usb_interface *iface) +{ + struct atp *dev = usb_get_intfdata(iface); + + return atp_recover(dev); +} + static struct usb_driver atp_driver = { .name = "appletouch", .probe = atp_probe, .disconnect = atp_disconnect, .suspend = atp_suspend, .resume = atp_resume, + .reset_resume = atp_reset_resume, .id_table = atp_table, }; diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h index 9aafa96cb74..78eb7841174 100644 --- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -193,6 +193,13 @@ static struct dmi_system_id __initdata i8042_dmi_nomux_table[] = { }, }, { + .ident = "Fujitsu-Siemens Amilo Pro 2030", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), + DMI_MATCH(DMI_PRODUCT_NAME, "AMILO PRO V2030"), + }, + }, + { /* * No data is coming from the touchscreen unless KBC * is in legacy mode. diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c index 592ff55b62d..170f71ee577 100644 --- a/drivers/input/serio/i8042.c +++ b/drivers/input/serio/i8042.c @@ -952,8 +952,12 @@ static int i8042_resume(struct platform_device *dev) i8042_ctr |= I8042_CTR_AUXDIS | I8042_CTR_KBDDIS; i8042_ctr &= ~(I8042_CTR_AUXINT | I8042_CTR_KBDINT); if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) { - printk(KERN_ERR "i8042: Can't write CTR to resume\n"); - return -EIO; + printk(KERN_WARNING "i8042: Can't write CTR to resume, retrying...\n"); + msleep(50); + if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) { + printk(KERN_ERR "i8042: CTR write retry failed\n"); + return -EIO; + } } diff --git a/drivers/isdn/sc/ioctl.c b/drivers/isdn/sc/ioctl.c index 7817d224492..1081091bbfa 100644 --- a/drivers/isdn/sc/ioctl.c +++ b/drivers/isdn/sc/ioctl.c @@ -226,6 +226,7 @@ int sc_ioctl(int card, scs_ioctl *data) */ if (copy_from_user(spid, data->dataptr, SCIOC_SPIDSIZE)) { kfree(rcvmsg); + kfree(spid); return -EFAULT; } diff --git a/drivers/macintosh/mediabay.c b/drivers/macintosh/mediabay.c index 82add26cc66..818aba36854 100644 --- a/drivers/macintosh/mediabay.c +++ b/drivers/macintosh/mediabay.c @@ -84,7 +84,7 @@ struct media_bay_info { int cd_irq; int cd_retry; #endif -#if defined(CONFIG_BLK_DEV_IDE_PMAC) || defined(CONFIG_MAC_FLOPPY) +#if defined(CONFIG_BLK_DEV_IDE_PMAC) int cd_index; #endif }; @@ -417,6 +417,7 @@ static void poll_media_bay(struct media_bay_info* bay) } } +#ifdef CONFIG_BLK_DEV_IDE_PMAC int check_media_bay(struct device_node *which_bay, int what) { int i; @@ -432,7 +433,6 @@ int check_media_bay(struct device_node *which_bay, int what) } EXPORT_SYMBOL(check_media_bay); -#ifdef CONFIG_BLK_DEV_IDE_PMAC int check_media_bay_by_base(unsigned long base, int what) { int i; @@ -556,7 +556,8 @@ static void media_bay_step(int i) printk("mediabay %d, registering IDE...\n", i); pmu_suspend(); ide_port_scan(bay->cd_port); - bay->cd_index = bay->cd_port->index; + if (bay->cd_port->present) + bay->cd_index = bay->cd_port->index; pmu_resume(); } if (bay->cd_index == -1) { diff --git a/drivers/macintosh/smu.c b/drivers/macintosh/smu.c index 77ad192962c..d86d57af282 100644 --- a/drivers/macintosh/smu.c +++ b/drivers/macintosh/smu.c @@ -483,12 +483,15 @@ int __init smu_init (void) if (smu_cmdbuf_abs == 0) { printk(KERN_ERR "SMU: Command buffer not allocated !\n"); + of_node_put(np); return -EINVAL; } smu = alloc_bootmem(sizeof(struct smu_device)); - if (smu == NULL) + if (smu == NULL) { + of_node_put(np); return -ENOMEM; + } memset(smu, 0, sizeof(*smu)); spin_lock_init(&smu->lock); diff --git a/drivers/macintosh/therm_adt746x.c b/drivers/macintosh/therm_adt746x.c index 54f4942a296..5366dc93fb3 100644 --- a/drivers/macintosh/therm_adt746x.c +++ b/drivers/macintosh/therm_adt746x.c @@ -562,18 +562,24 @@ thermostat_init(void) therm_type = ADT7460; else if (of_device_is_compatible(np, "adt7467")) therm_type = ADT7467; - else + else { + of_node_put(np); return -ENODEV; + } prop = of_get_property(np, "hwsensor-params-version", NULL); printk(KERN_INFO "adt746x: version %d (%ssupported)\n", *prop, (*prop == 1)?"":"un"); - if (*prop != 1) + if (*prop != 1) { + of_node_put(np); return -ENODEV; + } prop = of_get_property(np, "reg", NULL); - if (!prop) + if (!prop) { + of_node_put(np); return -ENODEV; + } /* look for bus either by path or using "reg" */ if (strstr(np->full_name, "/i2c-bus@") != NULL) { @@ -610,6 +616,7 @@ thermostat_init(void) if (of_dev == NULL) { printk(KERN_ERR "Can't register temperatures device !\n"); + of_node_put(np); return -ENODEV; } diff --git a/drivers/mmc/host/wbsd.c b/drivers/mmc/host/wbsd.c index be624a049c6..c303e7f57ab 100644 --- a/drivers/mmc/host/wbsd.c +++ b/drivers/mmc/host/wbsd.c @@ -1457,17 +1457,7 @@ static int __devinit wbsd_request_irq(struct wbsd_host *host, int irq) int ret; /* - * Allocate interrupt. - */ - - ret = request_irq(irq, wbsd_irq, IRQF_SHARED, DRIVER_NAME, host); - if (ret) - return ret; - - host->irq = irq; - - /* - * Set up tasklets. + * Set up tasklets. Must be done before requesting interrupt. */ tasklet_init(&host->card_tasklet, wbsd_tasklet_card, (unsigned long)host); @@ -1480,6 +1470,15 @@ static int __devinit wbsd_request_irq(struct wbsd_host *host, int irq) tasklet_init(&host->finish_tasklet, wbsd_tasklet_finish, (unsigned long)host); + /* + * Allocate interrupt. + */ + ret = request_irq(irq, wbsd_irq, IRQF_SHARED, DRIVER_NAME, host); + if (ret) + return ret; + + host->irq = irq; + return 0; } diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c index 99e0b4cdc56..3c798ae5c34 100644 --- a/drivers/net/atlx/atl1.c +++ b/drivers/net/atlx/atl1.c @@ -471,7 +471,6 @@ static int atl1_get_permanent_address(struct atl1_hw *hw) memcpy(hw->perm_mac_addr, eth_addr, ETH_ALEN); return 0; } - return 1; } /* see if SPI FLAGS exist ? */ diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c index 4b46e68183e..367b6d46270 100644 --- a/drivers/net/bnx2.c +++ b/drivers/net/bnx2.c @@ -5724,14 +5724,12 @@ bnx2_reset_task(struct work_struct *work) if (!netif_running(bp->dev)) return; - bp->in_reset_task = 1; bnx2_netif_stop(bp); bnx2_init_nic(bp); atomic_set(&bp->intr_sem, 1); bnx2_netif_start(bp); - bp->in_reset_task = 0; } static void @@ -5907,12 +5905,7 @@ bnx2_close(struct net_device *dev) struct bnx2 *bp = netdev_priv(dev); u32 reset_code; - /* Calling flush_scheduled_work() may deadlock because - * linkwatch_event() may be on the workqueue and it will try to get - * the rtnl_lock which we are holding. - */ - while (bp->in_reset_task) - msleep(1); + cancel_work_sync(&bp->reset_task); bnx2_disable_int_sync(bp); bnx2_napi_disable(bp); diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h index 1eaf5bb3d9c..2377cc13bf6 100644 --- a/drivers/net/bnx2.h +++ b/drivers/net/bnx2.h @@ -6656,7 +6656,6 @@ struct bnx2 { int current_interval; struct timer_list timer; struct work_struct reset_task; - int in_reset_task; /* Used to synchronize phy accesses. */ spinlock_t phy_lock; diff --git a/drivers/net/bnx2x.c b/drivers/net/bnx2x.c index 7bdb5af3595..70cba64732c 100644 --- a/drivers/net/bnx2x.c +++ b/drivers/net/bnx2x.c @@ -6,7 +6,8 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation. * - * Written by: Eliezer Tamir <eliezert@broadcom.com> + * Maintained by: Eilon Greenstein <eilong@broadcom.com> + * Written by: Eliezer Tamir * Based on code from Michael Chan's bnx2 driver * UDP CSUM errata workaround by Arik Gendelman * Slowpath rework by Vladislav Zolotarov @@ -74,7 +75,7 @@ static char version[] __devinitdata = "Broadcom NetXtreme II 5771X 10Gigabit Ethernet Driver " DRV_MODULE_NAME " " DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n"; -MODULE_AUTHOR("Eliezer Tamir <eliezert@broadcom.com>"); +MODULE_AUTHOR("Eliezer Tamir"); MODULE_DESCRIPTION("Broadcom NetXtreme II BCM57710 Driver"); MODULE_LICENSE("GPL"); MODULE_VERSION(DRV_MODULE_VERSION); diff --git a/drivers/net/bnx2x.h b/drivers/net/bnx2x.h index 4f0c0d31e7c..8e68d06510a 100644 --- a/drivers/net/bnx2x.h +++ b/drivers/net/bnx2x.h @@ -6,7 +6,8 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation. * - * Written by: Eliezer Tamir <eliezert@broadcom.com> + * Maintained by: Eilon Greenstein <eilong@broadcom.com> + * Written by: Eliezer Tamir * Based on code from Michael Chan's bnx2 driver */ diff --git a/drivers/net/bnx2x_init.h b/drivers/net/bnx2x_init.h index dcaecc53bdb..370686eef97 100644 --- a/drivers/net/bnx2x_init.h +++ b/drivers/net/bnx2x_init.h @@ -6,7 +6,8 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation. * - * Written by: Eliezer Tamir <eliezert@broadcom.com> + * Maintained by: Eilon Greenstein <eilong@broadcom.com> + * Written by: Eliezer Tamir */ #ifndef BNX2X_INIT_H diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c index faae01dc1c4..075fd547421 100644 --- a/drivers/net/ehea/ehea_main.c +++ b/drivers/net/ehea/ehea_main.c @@ -2605,7 +2605,8 @@ static int ehea_stop(struct net_device *dev) if (netif_msg_ifdown(port)) ehea_info("disabling port %s", dev->name); - flush_scheduled_work(); + cancel_work_sync(&port->reset_task); + mutex_lock(&port->port_lock); netif_stop_queue(dev); port_napi_disable(port); diff --git a/drivers/net/enc28j60.c b/drivers/net/enc28j60.c index 46a90e9ec56..c05cb159c77 100644 --- a/drivers/net/enc28j60.c +++ b/drivers/net/enc28j60.c @@ -400,26 +400,31 @@ enc28j60_packet_write(struct enc28j60_net *priv, int len, const u8 *data) mutex_unlock(&priv->lock); } -/* - * Wait until the PHY operation is complete. - */ -static int wait_phy_ready(struct enc28j60_net *priv) +static unsigned long msec20_to_jiffies; + +static int poll_ready(struct enc28j60_net *priv, u8 reg, u8 mask, u8 val) { - unsigned long timeout = jiffies + 20 * HZ / 1000; - int ret = 1; + unsigned long timeout = jiffies + msec20_to_jiffies; /* 20 msec timeout read */ - while (nolock_regb_read(priv, MISTAT) & MISTAT_BUSY) { + while ((nolock_regb_read(priv, reg) & mask) != val) { if (time_after(jiffies, timeout)) { if (netif_msg_drv(priv)) - printk(KERN_DEBUG DRV_NAME - ": PHY ready timeout!\n"); - ret = 0; - break; + dev_dbg(&priv->spi->dev, + "reg %02x ready timeout!\n", reg); + return -ETIMEDOUT; } cpu_relax(); } - return ret; + return 0; +} + +/* + * Wait until the PHY operation is complete. + */ +static int wait_phy_ready(struct enc28j60_net *priv) +{ + return poll_ready(priv, MISTAT, MISTAT_BUSY, 0) ? 0 : 1; } /* @@ -594,6 +599,32 @@ static void nolock_txfifo_init(struct enc28j60_net *priv, u16 start, u16 end) nolock_regw_write(priv, ETXNDL, end); } +/* + * Low power mode shrinks power consumption about 100x, so we'd like + * the chip to be in that mode whenever it's inactive. (However, we + * can't stay in lowpower mode during suspend with WOL active.) + */ +static void enc28j60_lowpower(struct enc28j60_net *priv, bool is_low) +{ + if (netif_msg_drv(priv)) + dev_dbg(&priv->spi->dev, "%s power...\n", + is_low ? "low" : "high"); + + mutex_lock(&priv->lock); + if (is_low) { + nolock_reg_bfclr(priv, ECON1, ECON1_RXEN); + poll_ready(priv, ESTAT, ESTAT_RXBUSY, 0); + poll_ready(priv, ECON1, ECON1_TXRTS, 0); + /* ECON2_VRPS was set during initialization */ + nolock_reg_bfset(priv, ECON2, ECON2_PWRSV); + } else { + nolock_reg_bfclr(priv, ECON2, ECON2_PWRSV); + poll_ready(priv, ESTAT, ESTAT_CLKRDY, ESTAT_CLKRDY); + /* caller sets ECON1_RXEN */ + } + mutex_unlock(&priv->lock); +} + static int enc28j60_hw_init(struct enc28j60_net *priv) { u8 reg; @@ -612,8 +643,8 @@ static int enc28j60_hw_init(struct enc28j60_net *priv) priv->tx_retry_count = 0; priv->max_pk_counter = 0; priv->rxfilter = RXFILTER_NORMAL; - /* enable address auto increment */ - nolock_regb_write(priv, ECON2, ECON2_AUTOINC); + /* enable address auto increment and voltage regulator powersave */ + nolock_regb_write(priv, ECON2, ECON2_AUTOINC | ECON2_VRPS); nolock_rxfifo_init(priv, RXSTART_INIT, RXEND_INIT); nolock_txfifo_init(priv, TXSTART_INIT, TXEND_INIT); @@ -690,7 +721,7 @@ static int enc28j60_hw_init(struct enc28j60_net *priv) static void enc28j60_hw_enable(struct enc28j60_net *priv) { - /* enable interrutps */ + /* enable interrupts */ if (netif_msg_hw(priv)) printk(KERN_DEBUG DRV_NAME ": %s() enabling interrupts.\n", __FUNCTION__); @@ -726,15 +757,12 @@ enc28j60_setlink(struct net_device *ndev, u8 autoneg, u16 speed, u8 duplex) int ret = 0; if (!priv->hw_enable) { - if (autoneg == AUTONEG_DISABLE && speed == SPEED_10) { + /* link is in low power mode now; duplex setting + * will take effect on next enc28j60_hw_init(). + */ + if (autoneg == AUTONEG_DISABLE && speed == SPEED_10) priv->full_duplex = (duplex == DUPLEX_FULL); - if (!enc28j60_hw_init(priv)) { - if (netif_msg_drv(priv)) - dev_err(&ndev->dev, - "hw_reset() failed\n"); - ret = -EINVAL; - } - } else { + else { if (netif_msg_link(priv)) dev_warn(&ndev->dev, "unsupported link setting\n"); @@ -1307,7 +1335,8 @@ static int enc28j60_net_open(struct net_device *dev) } return -EADDRNOTAVAIL; } - /* Reset the hardware here */ + /* Reset the hardware here (and take it out of low power mode) */ + enc28j60_lowpower(priv, false); enc28j60_hw_disable(priv); if (!enc28j60_hw_init(priv)) { if (netif_msg_ifup(priv)) @@ -1337,6 +1366,7 @@ static int enc28j60_net_close(struct net_device *dev) printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __FUNCTION__); enc28j60_hw_disable(priv); + enc28j60_lowpower(priv, true); netif_stop_queue(dev); return 0; @@ -1537,6 +1567,8 @@ static int __devinit enc28j60_probe(struct spi_device *spi) dev->watchdog_timeo = TX_TIMEOUT; SET_ETHTOOL_OPS(dev, &enc28j60_ethtool_ops); + enc28j60_lowpower(priv, true); + ret = register_netdev(dev); if (ret) { if (netif_msg_probe(priv)) @@ -1556,7 +1588,7 @@ error_alloc: return ret; } -static int enc28j60_remove(struct spi_device *spi) +static int __devexit enc28j60_remove(struct spi_device *spi) { struct enc28j60_net *priv = dev_get_drvdata(&spi->dev); @@ -1573,15 +1605,16 @@ static int enc28j60_remove(struct spi_device *spi) static struct spi_driver enc28j60_driver = { .driver = { .name = DRV_NAME, - .bus = &spi_bus_type, .owner = THIS_MODULE, - }, + }, .probe = enc28j60_probe, .remove = __devexit_p(enc28j60_remove), }; static int __init enc28j60_init(void) { + msec20_to_jiffies = msecs_to_jiffies(20); + return spi_register_driver(&enc28j60_driver); } diff --git a/drivers/net/fec_mpc52xx.c b/drivers/net/fec_mpc52xx.c index 5f9c42e7a7f..329edd9c08f 100644 --- a/drivers/net/fec_mpc52xx.c +++ b/drivers/net/fec_mpc52xx.c @@ -78,7 +78,7 @@ module_param_array_named(mac, mpc52xx_fec_mac_addr, byte, NULL, 0); MODULE_PARM_DESC(mac, "six hex digits, ie. 0x1,0x2,0xc0,0x01,0xba,0xbe"); #define MPC52xx_MESSAGES_DEFAULT ( NETIF_MSG_DRV | NETIF_MSG_PROBE | \ - NETIF_MSG_LINK | NETIF_MSG_IFDOWN | NETIF_MSG_IFDOWN ) + NETIF_MSG_LINK | NETIF_MSG_IFDOWN | NETIF_MSG_IFUP) static int debug = -1; /* the above default */ module_param(debug, int, 0); MODULE_PARM_DESC(debug, "debugging messages level"); diff --git a/drivers/net/hamradio/baycom_epp.c b/drivers/net/hamradio/baycom_epp.c index dde9c7e6408..00bc7fbb6b3 100644 --- a/drivers/net/hamradio/baycom_epp.c +++ b/drivers/net/hamradio/baycom_epp.c @@ -959,7 +959,7 @@ static int epp_close(struct net_device *dev) unsigned char tmp[1]; bc->work_running = 0; - flush_scheduled_work(); + cancel_delayed_work_sync(&bc->run_work); bc->stat = EPP_DCDBIT; tmp[0] = 0; pp->ops->epp_write_addr(pp, tmp, 1, 0); diff --git a/drivers/net/ibm_newemac/Kconfig b/drivers/net/ibm_newemac/Kconfig index 0d3e7380bad..70a3272ee99 100644 --- a/drivers/net/ibm_newemac/Kconfig +++ b/drivers/net/ibm_newemac/Kconfig @@ -1,6 +1,7 @@ config IBM_NEW_EMAC tristate "IBM EMAC Ethernet support" depends on PPC_DCR && PPC_MERGE + select CRC32 help This driver supports the IBM EMAC family of Ethernet controllers typically found on 4xx embedded PowerPC chips, but also on the diff --git a/drivers/net/ipg.c b/drivers/net/ipg.c index 9b358f61ed7..679a0826780 100644 --- a/drivers/net/ipg.c +++ b/drivers/net/ipg.c @@ -577,12 +577,12 @@ static void ipg_nic_set_multicast_list(struct net_device *dev) /* NIC to be configured in promiscuous mode. */ receivemode = IPG_RM_RECEIVEALLFRAMES; } else if ((dev->flags & IFF_ALLMULTI) || - (dev->flags & IFF_MULTICAST & + ((dev->flags & IFF_MULTICAST) && (dev->mc_count > IPG_MULTICAST_HASHTABLE_SIZE))) { /* NIC to be configured to receive all multicast * frames. */ receivemode |= IPG_RM_RECEIVEMULTICAST; - } else if (dev->flags & IFF_MULTICAST & (dev->mc_count > 0)) { + } else if ((dev->flags & IFF_MULTICAST) && (dev->mc_count > 0)) { /* NIC to be configured to receive selected * multicast addresses. */ receivemode |= IPG_RM_RECEIVEMULTICASTHASH; diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h index 8cb29f5b103..da4c4fb9706 100644 --- a/drivers/net/netxen/netxen_nic.h +++ b/drivers/net/netxen/netxen_nic.h @@ -776,7 +776,6 @@ struct netxen_hardware_context { u8 revision_id; u16 board_type; - u16 max_ports; struct netxen_board_info boardcfg; u32 xg_linkup; u32 qg_linksup; @@ -863,6 +862,7 @@ struct netxen_adapter { unsigned char mac_addr[ETH_ALEN]; int mtu; int portnum; + u8 physical_port; struct work_struct watchdog_task; struct timer_list watchdog_timer; @@ -1034,7 +1034,6 @@ int netxen_rom_se(struct netxen_adapter *adapter, int addr); /* Functions from netxen_nic_isr.c */ void netxen_initialize_adapter_sw(struct netxen_adapter *adapter); -void netxen_initialize_adapter_hw(struct netxen_adapter *adapter); void *netxen_alloc(struct pci_dev *pdev, size_t sz, dma_addr_t * ptr, struct pci_dev **used_dev); void netxen_initialize_adapter_ops(struct netxen_adapter *adapter); @@ -1077,20 +1076,6 @@ static const struct netxen_brdinfo netxen_boards[] = { #define NUM_SUPPORTED_BOARDS ARRAY_SIZE(netxen_boards) -static inline void get_brd_port_by_type(u32 type, int *ports) -{ - int i, found = 0; - for (i = 0; i < NUM_SUPPORTED_BOARDS; ++i) { - if (netxen_boards[i].brdtype == type) { - *ports = netxen_boards[i].ports; - found = 1; - break; - } - } - if (!found) - *ports = 0; -} - static inline void get_brd_name_by_type(u32 type, char *name) { int i, found = 0; @@ -1169,5 +1154,4 @@ extern int netxen_rom_fast_read(struct netxen_adapter *adapter, int addr, extern struct ethtool_ops netxen_nic_ethtool_ops; -extern int physical_port[]; /* physical port # from virtual port.*/ #endif /* __NETXEN_NIC_H_ */ diff --git a/drivers/net/netxen/netxen_nic_ethtool.c b/drivers/net/netxen/netxen_nic_ethtool.c index 6e98d830eef..723487bf200 100644 --- a/drivers/net/netxen/netxen_nic_ethtool.c +++ b/drivers/net/netxen/netxen_nic_ethtool.c @@ -369,7 +369,7 @@ netxen_nic_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *p) for (i = 3; niu_registers[mode].reg[i - 3] != -1; i++) { /* GB: port specific registers */ if (mode == 0 && i >= 19) - window = physical_port[adapter->portnum] * + window = adapter->physical_port * NETXEN_NIC_PORT_WINDOW; NETXEN_NIC_LOCKED_READ_REG(niu_registers[mode]. @@ -527,7 +527,7 @@ netxen_nic_get_pauseparam(struct net_device *dev, { struct netxen_adapter *adapter = netdev_priv(dev); __u32 val; - int port = physical_port[adapter->portnum]; + int port = adapter->physical_port; if (adapter->ahw.board_type == NETXEN_NIC_GBE) { if ((port < 0) || (port > NETXEN_NIU_MAX_GBE_PORTS)) @@ -573,7 +573,7 @@ netxen_nic_set_pauseparam(struct net_device *dev, { struct netxen_adapter *adapter = netdev_priv(dev); __u32 val; - int port = physical_port[adapter->portnum]; + int port = adapter->physical_port; /* read mode */ if (adapter->ahw.board_type == NETXEN_NIC_GBE) { if ((port < 0) || (port > NETXEN_NIU_MAX_GBE_PORTS)) diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c index af735646825..c43d06b8de9 100644 --- a/drivers/net/netxen/netxen_nic_hw.c +++ b/drivers/net/netxen/netxen_nic_hw.c @@ -396,11 +396,8 @@ int netxen_nic_hw_resources(struct netxen_adapter *adapter) } adapter->intr_scheme = readl( NETXEN_CRB_NORMALIZE(adapter, CRB_NIC_CAPABILITIES_FW)); - printk(KERN_NOTICE "%s: FW capabilities:0x%x\n", netxen_nic_driver_name, - adapter->intr_scheme); adapter->msi_mode = readl( NETXEN_CRB_NORMALIZE(adapter, CRB_NIC_MSI_MODE_FW)); - DPRINTK(INFO, "Receive Peg ready too. starting stuff\n"); addr = netxen_alloc(adapter->ahw.pdev, sizeof(struct netxen_ring_ctx) + @@ -408,8 +405,6 @@ int netxen_nic_hw_resources(struct netxen_adapter *adapter) (dma_addr_t *) & adapter->ctx_desc_phys_addr, &adapter->ctx_desc_pdev); - printk(KERN_INFO "ctx_desc_phys_addr: 0x%llx\n", - (unsigned long long) adapter->ctx_desc_phys_addr); if (addr == NULL) { DPRINTK(ERR, "bad return from pci_alloc_consistent\n"); err = -ENOMEM; @@ -429,8 +424,6 @@ int netxen_nic_hw_resources(struct netxen_adapter *adapter) adapter->max_tx_desc_count, (dma_addr_t *) & hw->cmd_desc_phys_addr, &adapter->ahw.cmd_desc_pdev); - printk(KERN_INFO "cmd_desc_phys_addr: 0x%llx\n", - (unsigned long long) hw->cmd_desc_phys_addr); if (addr == NULL) { DPRINTK(ERR, "bad return from pci_alloc_consistent\n"); @@ -1032,15 +1025,15 @@ int netxen_nic_get_board_info(struct netxen_adapter *adapter) int netxen_nic_set_mtu_gb(struct netxen_adapter *adapter, int new_mtu) { netxen_nic_write_w0(adapter, - NETXEN_NIU_GB_MAX_FRAME_SIZE( - physical_port[adapter->portnum]), new_mtu); + NETXEN_NIU_GB_MAX_FRAME_SIZE(adapter->physical_port), + new_mtu); return 0; } int netxen_nic_set_mtu_xgb(struct netxen_adapter *adapter, int new_mtu) { new_mtu += NETXEN_NIU_HDRSIZE + NETXEN_NIU_TLRSIZE; - if (physical_port[adapter->portnum] == 0) + if (adapter->physical_port == 0) netxen_nic_write_w0(adapter, NETXEN_NIU_XGE_MAX_FRAME_SIZE, new_mtu); else @@ -1051,7 +1044,7 @@ int netxen_nic_set_mtu_xgb(struct netxen_adapter *adapter, int new_mtu) void netxen_nic_init_niu_gb(struct netxen_adapter *adapter) { - netxen_niu_gbe_init_port(adapter, physical_port[adapter->portnum]); + netxen_niu_gbe_init_port(adapter, adapter->physical_port); } void @@ -1127,7 +1120,6 @@ void netxen_nic_set_link_parameters(struct netxen_adapter *adapter) void netxen_nic_flash_print(struct netxen_adapter *adapter) { - int valid = 1; u32 fw_major = 0; u32 fw_minor = 0; u32 fw_build = 0; @@ -1137,70 +1129,62 @@ void netxen_nic_flash_print(struct netxen_adapter *adapter) __le32 *ptr32; struct netxen_board_info *board_info = &(adapter->ahw.boardcfg); - if (board_info->magic != NETXEN_BDINFO_MAGIC) { - printk - ("NetXen Unknown board config, Read 0x%x expected as 0x%x\n", - board_info->magic, NETXEN_BDINFO_MAGIC); - valid = 0; - } - if (board_info->header_version != NETXEN_BDINFO_VERSION) { - printk("NetXen Unknown board config version." - " Read %x, expected %x\n", - board_info->header_version, NETXEN_BDINFO_VERSION); - valid = 0; - } - if (valid) { - ptr32 = (u32 *)&serial_num; - addr = NETXEN_USER_START + - offsetof(struct netxen_new_user_info, serial_num); - for (i = 0; i < 8; i++) { - if (netxen_rom_fast_read(adapter, addr, ptr32) == -1) { - printk("%s: ERROR reading %s board userarea.\n", - netxen_nic_driver_name, - netxen_nic_driver_name); - return; - } - ptr32++; - addr += sizeof(u32); + + adapter->driver_mismatch = 0; + + ptr32 = (u32 *)&serial_num; + addr = NETXEN_USER_START + + offsetof(struct netxen_new_user_info, serial_num); + for (i = 0; i < 8; i++) { + if (netxen_rom_fast_read(adapter, addr, ptr32) == -1) { + printk("%s: ERROR reading %s board userarea.\n", + netxen_nic_driver_name, + netxen_nic_driver_name); + adapter->driver_mismatch = 1; + return; } + ptr32++; + addr += sizeof(u32); + } + + fw_major = readl(NETXEN_CRB_NORMALIZE(adapter, + NETXEN_FW_VERSION_MAJOR)); + fw_minor = readl(NETXEN_CRB_NORMALIZE(adapter, + NETXEN_FW_VERSION_MINOR)); + fw_build = + readl(NETXEN_CRB_NORMALIZE(adapter, NETXEN_FW_VERSION_SUB)); + if (adapter->portnum == 0) { get_brd_name_by_type(board_info->board_type, brd_name); printk("NetXen %s Board S/N %s Chip id 0x%x\n", - brd_name, serial_num, board_info->chip_id); - - printk("NetXen %s Board #%d, Chip id 0x%x\n", - board_info->board_type == 0x0b ? "XGB" : "GBE", - board_info->board_num, board_info->chip_id); - fw_major = readl(NETXEN_CRB_NORMALIZE(adapter, - NETXEN_FW_VERSION_MAJOR)); - fw_minor = readl(NETXEN_CRB_NORMALIZE(adapter, - NETXEN_FW_VERSION_MINOR)); - fw_build = - readl(NETXEN_CRB_NORMALIZE(adapter, NETXEN_FW_VERSION_SUB)); - - printk("NetXen Firmware version %d.%d.%d\n", fw_major, fw_minor, - fw_build); + brd_name, serial_num, board_info->chip_id); + printk("NetXen Firmware version %d.%d.%d\n", fw_major, + fw_minor, fw_build); } + if (fw_major != _NETXEN_NIC_LINUX_MAJOR) { - printk(KERN_ERR "The mismatch in driver version and firmware " - "version major number\n" - "Driver version major number = %d \t" - "Firmware version major number = %d \n", - _NETXEN_NIC_LINUX_MAJOR, fw_major); adapter->driver_mismatch = 1; } if (fw_minor != _NETXEN_NIC_LINUX_MINOR && fw_minor != (_NETXEN_NIC_LINUX_MINOR + 1)) { - printk(KERN_ERR "The mismatch in driver version and firmware " - "version minor number\n" - "Driver version minor number = %d \t" - "Firmware version minor number = %d \n", - _NETXEN_NIC_LINUX_MINOR, fw_minor); adapter->driver_mismatch = 1; } - if (adapter->driver_mismatch) - printk(KERN_INFO "Use the driver with version no %d.%d.xxx\n", - fw_major, fw_minor); + if (adapter->driver_mismatch) { + printk(KERN_ERR "%s: driver and firmware version mismatch\n", + adapter->netdev->name); + return; + } + + switch (adapter->ahw.board_type) { + case NETXEN_NIC_GBE: + dev_info(&adapter->pdev->dev, "%s: GbE port initialized\n", + adapter->netdev->name); + break; + case NETXEN_NIC_XGBE: + dev_info(&adapter->pdev->dev, "%s: XGbE port initialized\n", + adapter->netdev->name); + break; + } } diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c index 45fa33e0cb9..70d1b22ced2 100644 --- a/drivers/net/netxen/netxen_nic_init.c +++ b/drivers/net/netxen/netxen_nic_init.c @@ -203,21 +203,6 @@ void netxen_initialize_adapter_sw(struct netxen_adapter *adapter) } } -void netxen_initialize_adapter_hw(struct netxen_adapter *adapter) -{ - int ports = 0; - struct netxen_board_info *board_info = &(adapter->ahw.boardcfg); - - if (netxen_nic_get_board_info(adapter) != 0) - printk("%s: Error getting board config info.\n", - netxen_nic_driver_name); - get_brd_port_by_type(board_info->board_type, &ports); - if (ports == 0) - printk(KERN_ERR "%s: Unknown board type\n", - netxen_nic_driver_name); - adapter->ahw.max_ports = ports; -} - void netxen_initialize_adapter_ops(struct netxen_adapter *adapter) { switch (adapter->ahw.board_type) { @@ -765,18 +750,13 @@ int netxen_flash_unlock(struct netxen_adapter *adapter) int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose) { - int addr, val, status; + int addr, val; int n, i; int init_delay = 0; struct crb_addr_pair *buf; u32 off; /* resetall */ - status = netxen_nic_get_board_info(adapter); - if (status) - printk("%s: netxen_pinit_from_rom: Error getting board info\n", - netxen_nic_driver_name); - netxen_crb_writelit_adapter(adapter, NETXEN_ROMUSB_GLB_SW_RESET, NETXEN_ROMBUS_RESET); @@ -860,10 +840,10 @@ int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose) netxen_nic_pci_change_crbwindow(adapter, 1); } if (init_delay == 1) { - msleep(2000); + msleep(1000); init_delay = 0; } - msleep(20); + msleep(1); } kfree(buf); @@ -938,12 +918,28 @@ int netxen_initialize_adapter_offload(struct netxen_adapter *adapter) void netxen_free_adapter_offload(struct netxen_adapter *adapter) { + int i; + if (adapter->dummy_dma.addr) { - pci_free_consistent(adapter->ahw.pdev, + i = 100; + do { + if (dma_watchdog_shutdown_request(adapter) == 1) + break; + msleep(50); + if (dma_watchdog_shutdown_poll_result(adapter) == 1) + break; + } while (--i); + + if (i) { + pci_free_consistent(adapter->ahw.pdev, NETXEN_HOST_DUMMY_DMA_SIZE, adapter->dummy_dma.addr, adapter->dummy_dma.phys_addr); - adapter->dummy_dma.addr = NULL; + adapter->dummy_dma.addr = NULL; + } else { + printk(KERN_ERR "%s: dma_watchdog_shutdown failed\n", + adapter->netdev->name); + } } } diff --git a/drivers/net/netxen/netxen_nic_isr.c b/drivers/net/netxen/netxen_nic_isr.c index f487615f406..96cec41f901 100644 --- a/drivers/net/netxen/netxen_nic_isr.c +++ b/drivers/net/netxen/netxen_nic_isr.c @@ -145,7 +145,7 @@ static void netxen_nic_isr_other(struct netxen_adapter *adapter) /* verify the offset */ val = readl(NETXEN_CRB_NORMALIZE(adapter, CRB_XG_STATE)); - val = val >> physical_port[adapter->portnum]; + val = val >> adapter->physical_port; if (val == adapter->ahw.qg_linksup) return; @@ -199,7 +199,7 @@ void netxen_nic_xgbe_handle_phy_intr(struct netxen_adapter *adapter) /* WINDOW = 1 */ val = readl(NETXEN_CRB_NORMALIZE(adapter, CRB_XG_STATE)); - val >>= (physical_port[adapter->portnum] * 8); + val >>= (adapter->physical_port * 8); val &= 0xff; if (adapter->ahw.xg_linkup == 1 && val != XG_LINK_UP) { diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c index 7144c255ce5..6797ed069f1 100644 --- a/drivers/net/netxen/netxen_nic_main.c +++ b/drivers/net/netxen/netxen_nic_main.c @@ -70,17 +70,15 @@ static void netxen_nic_poll_controller(struct net_device *netdev); static irqreturn_t netxen_intr(int irq, void *data); static irqreturn_t netxen_msi_intr(int irq, void *data); -int physical_port[] = {0, 1, 2, 3}; - /* PCI Device ID Table */ static struct pci_device_id netxen_pci_tbl[] __devinitdata = { - {PCI_DEVICE(0x4040, 0x0001)}, - {PCI_DEVICE(0x4040, 0x0002)}, - {PCI_DEVICE(0x4040, 0x0003)}, - {PCI_DEVICE(0x4040, 0x0004)}, - {PCI_DEVICE(0x4040, 0x0005)}, - {PCI_DEVICE(0x4040, 0x0024)}, - {PCI_DEVICE(0x4040, 0x0025)}, + {PCI_DEVICE(0x4040, 0x0001), PCI_DEVICE_CLASS(0x020000, ~0)}, + {PCI_DEVICE(0x4040, 0x0002), PCI_DEVICE_CLASS(0x020000, ~0)}, + {PCI_DEVICE(0x4040, 0x0003), PCI_DEVICE_CLASS(0x020000, ~0)}, + {PCI_DEVICE(0x4040, 0x0004), PCI_DEVICE_CLASS(0x020000, ~0)}, + {PCI_DEVICE(0x4040, 0x0005), PCI_DEVICE_CLASS(0x020000, ~0)}, + {PCI_DEVICE(0x4040, 0x0024), PCI_DEVICE_CLASS(0x020000, ~0)}, + {PCI_DEVICE(0x4040, 0x0025), PCI_DEVICE_CLASS(0x020000, ~0)}, {0,} }; @@ -288,10 +286,11 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) int pci_func_id = PCI_FUNC(pdev->devfn); DECLARE_MAC_BUF(mac); - printk(KERN_INFO "%s \n", netxen_nic_driver_string); + if (pci_func_id == 0) + printk(KERN_INFO "%s \n", netxen_nic_driver_string); if (pdev->class != 0x020000) { - printk(KERN_ERR"NetXen function %d, class %x will not " + printk(KERN_DEBUG "NetXen function %d, class %x will not " "be enabled.\n",pci_func_id, pdev->class); return -ENODEV; } @@ -450,8 +449,12 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) */ adapter->curr_window = 255; - /* initialize the adapter */ - netxen_initialize_adapter_hw(adapter); + if (netxen_nic_get_board_info(adapter) != 0) { + printk("%s: Error getting board config info.\n", + netxen_nic_driver_name); + err = -EIO; + goto err_out_iounmap; + } /* * Adapter in our case is quad port so initialize it before @@ -530,17 +533,15 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) netxen_initialize_adapter_sw(adapter); /* initialize the buffers in adapter */ /* Mezz cards have PCI function 0,2,3 enabled */ - if ((adapter->ahw.boardcfg.board_type == NETXEN_BRDTYPE_P2_SB31_10G_IMEZ) - && (pci_func_id >= 2)) + switch (adapter->ahw.boardcfg.board_type) { + case NETXEN_BRDTYPE_P2_SB31_10G_IMEZ: + case NETXEN_BRDTYPE_P2_SB31_10G_HMEZ: + if (pci_func_id >= 2) adapter->portnum = pci_func_id - 2; - -#ifdef CONFIG_IA64 - if(adapter->portnum == 0) { - netxen_pinit_from_rom(adapter, 0); - udelay(500); - netxen_load_firmware(adapter); + break; + default: + break; } -#endif init_timer(&adapter->watchdog_timer); adapter->ahw.xg_linkup = 0; @@ -613,11 +614,18 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) err = -ENODEV; goto err_out_free_dev; } + } else { + writel(0, NETXEN_CRB_NORMALIZE(adapter, + CRB_CMDPEG_STATE)); + netxen_pinit_from_rom(adapter, 0); + msleep(1); + netxen_load_firmware(adapter); + netxen_phantom_init(adapter, NETXEN_NIC_PEG_TUNE); } /* clear the register for future unloads/loads */ writel(0, NETXEN_CRB_NORMALIZE(adapter, NETXEN_CAM_RAM(0x1fc))); - printk(KERN_INFO "State: 0x%0x\n", + dev_info(&pdev->dev, "cmdpeg state: 0x%0x\n", readl(NETXEN_CRB_NORMALIZE(adapter, CRB_CMDPEG_STATE))); /* @@ -639,9 +647,10 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) /* * See if the firmware gave us a virtual-physical port mapping. */ + adapter->physical_port = adapter->portnum; i = readl(NETXEN_CRB_NORMALIZE(adapter, CRB_V2P(adapter->portnum))); if (i != 0x55555555) - physical_port[adapter->portnum] = i; + adapter->physical_port = i; netif_carrier_off(netdev); netif_stop_queue(netdev); @@ -654,22 +663,9 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) goto err_out_free_dev; } + netxen_nic_flash_print(adapter); pci_set_drvdata(pdev, adapter); - switch (adapter->ahw.board_type) { - case NETXEN_NIC_GBE: - printk(KERN_INFO "%s: QUAD GbE board initialized\n", - netxen_nic_driver_name); - break; - - case NETXEN_NIC_XGBE: - printk(KERN_INFO "%s: XGbE board initialized\n", - netxen_nic_driver_name); - break; - } - - adapter->driver_mismatch = 0; - return 0; err_out_free_dev: @@ -760,55 +756,8 @@ static void __devexit netxen_nic_remove(struct pci_dev *pdev) vfree(adapter->cmd_buf_arr); - if (adapter->portnum == 0) { - if (init_firmware_done) { - i = 100; - do { - if (dma_watchdog_shutdown_request(adapter) == 1) - break; - msleep(100); - if (dma_watchdog_shutdown_poll_result(adapter) == 1) - break; - } while (--i); - - if (i == 0) - printk(KERN_ERR "%s: dma_watchdog_shutdown failed\n", - netdev->name); - - /* clear the register for future unloads/loads */ - writel(0, NETXEN_CRB_NORMALIZE(adapter, NETXEN_CAM_RAM(0x1fc))); - printk(KERN_INFO "State: 0x%0x\n", - readl(NETXEN_CRB_NORMALIZE(adapter, CRB_CMDPEG_STATE))); - - /* leave the hw in the same state as reboot */ - writel(0, NETXEN_CRB_NORMALIZE(adapter, CRB_CMDPEG_STATE)); - netxen_pinit_from_rom(adapter, 0); - msleep(1); - netxen_load_firmware(adapter); - netxen_phantom_init(adapter, NETXEN_NIC_PEG_TUNE); - } - - /* clear the register for future unloads/loads */ - writel(0, NETXEN_CRB_NORMALIZE(adapter, NETXEN_CAM_RAM(0x1fc))); - printk(KERN_INFO "State: 0x%0x\n", - readl(NETXEN_CRB_NORMALIZE(adapter, CRB_CMDPEG_STATE))); - - i = 100; - do { - if (dma_watchdog_shutdown_request(adapter) == 1) - break; - msleep(100); - if (dma_watchdog_shutdown_poll_result(adapter) == 1) - break; - } while (--i); - - if (i) { - netxen_free_adapter_offload(adapter); - } else { - printk(KERN_ERR "%s: dma_watchdog_shutdown failed\n", - netdev->name); - } - } + if (adapter->portnum == 0) + netxen_free_adapter_offload(adapter); if (adapter->irq) free_irq(adapter->irq, adapter); @@ -840,13 +789,15 @@ static int netxen_nic_open(struct net_device *netdev) irq_handler_t handler; unsigned long flags = IRQF_SAMPLE_RANDOM; + if (adapter->driver_mismatch) + return -EIO; + if (adapter->is_up != NETXEN_ADAPTER_UP_MAGIC) { err = netxen_init_firmware(adapter); if (err != 0) { printk(KERN_ERR "Failed to init firmware\n"); return -EIO; } - netxen_nic_flash_print(adapter); /* setup all the resources for the Phantom... */ /* this include the descriptors for rcv, tx, and status */ @@ -895,14 +846,12 @@ static int netxen_nic_open(struct net_device *netdev) if (adapter->set_mtu) adapter->set_mtu(adapter, netdev->mtu); - if (!adapter->driver_mismatch) - mod_timer(&adapter->watchdog_timer, jiffies); + mod_timer(&adapter->watchdog_timer, jiffies); napi_enable(&adapter->napi); netxen_nic_enable_int(adapter); - if (!adapter->driver_mismatch) - netif_start_queue(netdev); + netif_start_queue(netdev); return 0; } diff --git a/drivers/net/netxen/netxen_nic_niu.c b/drivers/net/netxen/netxen_nic_niu.c index 1c852a76c80..a3bc7cc67a6 100644 --- a/drivers/net/netxen/netxen_nic_niu.c +++ b/drivers/net/netxen/netxen_nic_niu.c @@ -94,7 +94,7 @@ int netxen_niu_gbe_phy_read(struct netxen_adapter *adapter, long reg, long timeout = 0; long result = 0; long restore = 0; - long phy = physical_port[adapter->portnum]; + long phy = adapter->physical_port; __u32 address; __u32 command; __u32 status; @@ -190,7 +190,7 @@ int netxen_niu_gbe_phy_write(struct netxen_adapter *adapter, long reg, long timeout = 0; long result = 0; long restore = 0; - long phy = physical_port[adapter->portnum]; + long phy = adapter->physical_port; __u32 address; __u32 command; __u32 status; @@ -456,7 +456,7 @@ int netxen_niu_gbe_init_port(struct netxen_adapter *adapter, int port) int netxen_niu_xg_init_port(struct netxen_adapter *adapter, int port) { - u32 portnum = physical_port[adapter->portnum]; + u32 portnum = adapter->physical_port; netxen_crb_writelit_adapter(adapter, NETXEN_NIU_XGE_CONFIG_1+(0x10000*portnum), 0x1447); @@ -573,7 +573,7 @@ static int netxen_niu_macaddr_get(struct netxen_adapter *adapter, { u32 stationhigh; u32 stationlow; - int phy = physical_port[adapter->portnum]; + int phy = adapter->physical_port; u8 val[8]; if (addr == NULL) @@ -604,7 +604,7 @@ int netxen_niu_macaddr_set(struct netxen_adapter *adapter, { u8 temp[4]; u32 val; - int phy = physical_port[adapter->portnum]; + int phy = adapter->physical_port; unsigned char mac_addr[6]; int i; DECLARE_MAC_BUF(mac); @@ -724,7 +724,7 @@ int netxen_niu_enable_gbe_port(struct netxen_adapter *adapter, int netxen_niu_disable_gbe_port(struct netxen_adapter *adapter) { __u32 mac_cfg0; - u32 port = physical_port[adapter->portnum]; + u32 port = adapter->physical_port; if (port > NETXEN_NIU_MAX_GBE_PORTS) return -EINVAL; @@ -740,7 +740,7 @@ int netxen_niu_disable_gbe_port(struct netxen_adapter *adapter) int netxen_niu_disable_xg_port(struct netxen_adapter *adapter) { __u32 mac_cfg; - u32 port = physical_port[adapter->portnum]; + u32 port = adapter->physical_port; if (port > NETXEN_NIU_MAX_XG_PORTS) return -EINVAL; @@ -757,7 +757,7 @@ int netxen_niu_set_promiscuous_mode(struct netxen_adapter *adapter, netxen_niu_prom_mode_t mode) { __u32 reg; - u32 port = physical_port[adapter->portnum]; + u32 port = adapter->physical_port; if (port > NETXEN_NIU_MAX_GBE_PORTS) return -EINVAL; @@ -814,7 +814,7 @@ int netxen_niu_set_promiscuous_mode(struct netxen_adapter *adapter, int netxen_niu_xg_macaddr_set(struct netxen_adapter *adapter, netxen_ethernet_macaddr_t addr) { - int phy = physical_port[adapter->portnum]; + int phy = adapter->physical_port; u8 temp[4]; u32 val; @@ -867,7 +867,7 @@ int netxen_niu_xg_macaddr_set(struct netxen_adapter *adapter, int netxen_niu_xg_macaddr_get(struct netxen_adapter *adapter, netxen_ethernet_macaddr_t * addr) { - int phy = physical_port[adapter->portnum]; + int phy = adapter->physical_port; u32 stationhigh; u32 stationlow; u8 val[8]; @@ -896,7 +896,7 @@ int netxen_niu_xg_set_promiscuous_mode(struct netxen_adapter *adapter, netxen_niu_prom_mode_t mode) { __u32 reg; - u32 port = physical_port[adapter->portnum]; + u32 port = adapter->physical_port; if (port > NETXEN_NIU_MAX_XG_PORTS) return -EINVAL; diff --git a/drivers/net/r6040.c b/drivers/net/r6040.c index 169edc15492..858b191517b 100644 --- a/drivers/net/r6040.c +++ b/drivers/net/r6040.c @@ -733,7 +733,7 @@ static void r6040_timer(unsigned long data) } /* Timer active again */ - mod_timer(&lp->timer, jiffies + round_jiffies(HZ)); + mod_timer(&lp->timer, round_jiffies(jiffies + HZ)); } /* Read/set MAC address routines */ diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 62436b3a18c..c8a5ef2d75f 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -118,6 +118,7 @@ static const struct pci_device_id sky2_id_table[] = { { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4352) }, /* 88E8038 */ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4353) }, /* 88E8039 */ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4354) }, /* 88E8040 */ + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4355) }, /* 88E8040T */ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4356) }, /* 88EC033 */ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4357) }, /* 88E8042 */ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x435A) }, /* 88E8048 */ diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c index 4e280020518..e2ee91a6ae7 100644 --- a/drivers/net/smc911x.c +++ b/drivers/net/smc911x.c @@ -136,7 +136,6 @@ struct smc911x_local { /* work queue */ struct work_struct phy_configure; - int work_pending; int tx_throttle; spinlock_t lock; @@ -960,11 +959,11 @@ static void smc911x_phy_configure(struct work_struct *work) * We should not be called if phy_type is zero. */ if (lp->phy_type == 0) - goto smc911x_phy_configure_exit_nolock; + return; if (smc911x_phy_reset(dev, phyaddr)) { printk("%s: PHY reset timed out\n", dev->name); - goto smc911x_phy_configure_exit_nolock; + return; } spin_lock_irqsave(&lp->lock, flags); @@ -1033,8 +1032,6 @@ static void smc911x_phy_configure(struct work_struct *work) smc911x_phy_configure_exit: spin_unlock_irqrestore(&lp->lock, flags); -smc911x_phy_configure_exit_nolock: - lp->work_pending = 0; } /* @@ -1356,11 +1353,8 @@ static void smc911x_timeout(struct net_device *dev) * smc911x_phy_configure() calls msleep() which calls schedule_timeout() * which calls schedule(). Hence we use a work queue. */ - if (lp->phy_type != 0) { - if (schedule_work(&lp->phy_configure)) { - lp->work_pending = 1; - } - } + if (lp->phy_type != 0) + schedule_work(&lp->phy_configure); /* We can accept TX packets again */ dev->trans_start = jiffies; @@ -1531,16 +1525,8 @@ static int smc911x_close(struct net_device *dev) if (lp->phy_type != 0) { /* We need to ensure that no calls to * smc911x_phy_configure are pending. - - * flush_scheduled_work() cannot be called because we - * are running with the netlink semaphore held (from - * devinet_ioctl()) and the pending work queue - * contains linkwatch_event() (scheduled by - * netif_carrier_off() above). linkwatch_event() also - * wants the netlink semaphore. */ - while (lp->work_pending) - schedule(); + cancel_work_sync(&lp->phy_configure); smc911x_phy_powerdown(dev, lp->mii.phy_id); } diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c index a188e33484e..f2051b209da 100644 --- a/drivers/net/smc91x.c +++ b/drivers/net/smc91x.c @@ -1016,15 +1016,8 @@ static void smc_phy_powerdown(struct net_device *dev) /* We need to ensure that no calls to smc_phy_configure are pending. - - flush_scheduled_work() cannot be called because we are - running with the netlink semaphore held (from - devinet_ioctl()) and the pending work queue contains - linkwatch_event() (scheduled by netif_carrier_off() - above). linkwatch_event() also wants the netlink semaphore. */ - while(lp->work_pending) - yield(); + cancel_work_sync(&lp->phy_configure); bmcr = smc_phy_read(dev, phy, MII_BMCR); smc_phy_write(dev, phy, MII_BMCR, bmcr | BMCR_PDOWN); @@ -1161,7 +1154,6 @@ static void smc_phy_configure(struct work_struct *work) smc_phy_configure_exit: SMC_SELECT_BANK(lp, 2); spin_unlock_irq(&lp->lock); - lp->work_pending = 0; } /* @@ -1389,11 +1381,8 @@ static void smc_timeout(struct net_device *dev) * smc_phy_configure() calls msleep() which calls schedule_timeout() * which calls schedule(). Hence we use a work queue. */ - if (lp->phy_type != 0) { - if (schedule_work(&lp->phy_configure)) { - lp->work_pending = 1; - } - } + if (lp->phy_type != 0) + schedule_work(&lp->phy_configure); /* We can accept TX packets again */ dev->trans_start = jiffies; diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c index 55670b5eb61..af8d2c436ef 100644 --- a/drivers/net/tulip/tulip_core.c +++ b/drivers/net/tulip/tulip_core.c @@ -731,7 +731,7 @@ static void tulip_down (struct net_device *dev) void __iomem *ioaddr = tp->base_addr; unsigned long flags; - flush_scheduled_work(); + cancel_work_sync(&tp->media_work); #ifdef CONFIG_TULIP_NAPI napi_disable(&tp->napi); diff --git a/drivers/net/tun.c b/drivers/net/tun.c index 0ce07a339c7..7ab94c825b5 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -313,6 +313,21 @@ static __inline__ ssize_t tun_get_user(struct tun_struct *tun, struct iovec *iv, switch (tun->flags & TUN_TYPE_MASK) { case TUN_TUN_DEV: + if (tun->flags & TUN_NO_PI) { + switch (skb->data[0] & 0xf0) { + case 0x40: + pi.proto = htons(ETH_P_IP); + break; + case 0x60: + pi.proto = htons(ETH_P_IPV6); + break; + default: + tun->dev->stats.rx_dropped++; + kfree_skb(skb); + return -EINVAL; + } + } + skb_reset_mac_header(skb); skb->protocol = pi.proto; skb->dev = tun->dev; diff --git a/drivers/net/usb/kaweth.c b/drivers/net/usb/kaweth.c index 0dcfc031026..7c66b052f55 100644 --- a/drivers/net/usb/kaweth.c +++ b/drivers/net/usb/kaweth.c @@ -706,7 +706,7 @@ static void kaweth_kill_urbs(struct kaweth_device *kaweth) usb_kill_urb(kaweth->rx_urb); usb_kill_urb(kaweth->tx_urb); - flush_scheduled_work(); + cancel_delayed_work_sync(&kaweth->lowmem_work); /* a scheduled work may have resubmitted, we hit them again */ diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h index dfa4bdd5597..d3db298c05f 100644 --- a/drivers/net/wireless/b43/b43.h +++ b/drivers/net/wireless/b43/b43.h @@ -630,7 +630,6 @@ struct b43_pio { /* Context information for a noise calculation (Link Quality). */ struct b43_noise_calculation { - u8 channel_at_start; bool calculation_running; u8 nr_samples; s8 samples[8][4]; diff --git a/drivers/net/wireless/b43/dma.c b/drivers/net/wireless/b43/dma.c index 6dcbb3c87e7..e23f2f172bd 100644 --- a/drivers/net/wireless/b43/dma.c +++ b/drivers/net/wireless/b43/dma.c @@ -795,24 +795,49 @@ struct b43_dmaring *b43_setup_dmaring(struct b43_wldev *dev, { struct b43_dmaring *ring; int err; - int nr_slots; dma_addr_t dma_test; ring = kzalloc(sizeof(*ring), GFP_KERNEL); if (!ring) goto out; - ring->type = type; - nr_slots = B43_RXRING_SLOTS; + ring->nr_slots = B43_RXRING_SLOTS; if (for_tx) - nr_slots = B43_TXRING_SLOTS; + ring->nr_slots = B43_TXRING_SLOTS; - ring->meta = kcalloc(nr_slots, sizeof(struct b43_dmadesc_meta), + ring->meta = kcalloc(ring->nr_slots, sizeof(struct b43_dmadesc_meta), GFP_KERNEL); if (!ring->meta) goto err_kfree_ring; + + ring->type = type; + ring->dev = dev; + ring->mmio_base = b43_dmacontroller_base(type, controller_index); + ring->index = controller_index; + if (type == B43_DMA_64BIT) + ring->ops = &dma64_ops; + else + ring->ops = &dma32_ops; if (for_tx) { - ring->txhdr_cache = kcalloc(nr_slots, + ring->tx = 1; + ring->current_slot = -1; + } else { + if (ring->index == 0) { + ring->rx_buffersize = B43_DMA0_RX_BUFFERSIZE; + ring->frameoffset = B43_DMA0_RX_FRAMEOFFSET; + } else if (ring->index == 3) { + ring->rx_buffersize = B43_DMA3_RX_BUFFERSIZE; + ring->frameoffset = B43_DMA3_RX_FRAMEOFFSET; + } else + B43_WARN_ON(1); + } + spin_lock_init(&ring->lock); +#ifdef CONFIG_B43_DEBUG + ring->last_injected_overflow = jiffies; +#endif + + if (for_tx) { + ring->txhdr_cache = kcalloc(ring->nr_slots, b43_txhdr_size(dev), GFP_KERNEL); if (!ring->txhdr_cache) @@ -828,7 +853,7 @@ struct b43_dmaring *b43_setup_dmaring(struct b43_wldev *dev, b43_txhdr_size(dev), 1)) { /* ugh realloc */ kfree(ring->txhdr_cache); - ring->txhdr_cache = kcalloc(nr_slots, + ring->txhdr_cache = kcalloc(ring->nr_slots, b43_txhdr_size(dev), GFP_KERNEL | GFP_DMA); if (!ring->txhdr_cache) @@ -853,32 +878,6 @@ struct b43_dmaring *b43_setup_dmaring(struct b43_wldev *dev, DMA_TO_DEVICE); } - ring->dev = dev; - ring->nr_slots = nr_slots; - ring->mmio_base = b43_dmacontroller_base(type, controller_index); - ring->index = controller_index; - if (type == B43_DMA_64BIT) - ring->ops = &dma64_ops; - else - ring->ops = &dma32_ops; - if (for_tx) { - ring->tx = 1; - ring->current_slot = -1; - } else { - if (ring->index == 0) { - ring->rx_buffersize = B43_DMA0_RX_BUFFERSIZE; - ring->frameoffset = B43_DMA0_RX_FRAMEOFFSET; - } else if (ring->index == 3) { - ring->rx_buffersize = B43_DMA3_RX_BUFFERSIZE; - ring->frameoffset = B43_DMA3_RX_FRAMEOFFSET; - } else - B43_WARN_ON(1); - } - spin_lock_init(&ring->lock); -#ifdef CONFIG_B43_DEBUG - ring->last_injected_overflow = jiffies; -#endif - err = alloc_ringmemory(ring); if (err) goto err_kfree_txhdr_cache; diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index 6c3d9ea0a9f..fa4b0d8b74a 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -1145,7 +1145,6 @@ static void b43_generate_noise_sample(struct b43_wldev *dev) b43_jssi_write(dev, 0x7F7F7F7F); b43_write32(dev, B43_MMIO_MACCMD, b43_read32(dev, B43_MMIO_MACCMD) | B43_MACCMD_BGNOISE); - B43_WARN_ON(dev->noisecalc.channel_at_start != dev->phy.channel); } static void b43_calculate_link_quality(struct b43_wldev *dev) @@ -1154,7 +1153,6 @@ static void b43_calculate_link_quality(struct b43_wldev *dev) if (dev->noisecalc.calculation_running) return; - dev->noisecalc.channel_at_start = dev->phy.channel; dev->noisecalc.calculation_running = 1; dev->noisecalc.nr_samples = 0; @@ -1171,9 +1169,16 @@ static void handle_irq_noise(struct b43_wldev *dev) /* Bottom half of Link Quality calculation. */ + /* Possible race condition: It might be possible that the user + * changed to a different channel in the meantime since we + * started the calculation. We ignore that fact, since it's + * not really that much of a problem. The background noise is + * an estimation only anyway. Slightly wrong results will get damped + * by the averaging of the 8 sample rounds. Additionally the + * value is shortlived. So it will be replaced by the next noise + * calculation round soon. */ + B43_WARN_ON(!dev->noisecalc.calculation_running); - if (dev->noisecalc.channel_at_start != phy->channel) - goto drop_calculation; *((__le32 *)noise) = cpu_to_le32(b43_jssi_read(dev)); if (noise[0] == 0x7F || noise[1] == 0x7F || noise[2] == 0x7F || noise[3] == 0x7F) @@ -1214,11 +1219,10 @@ static void handle_irq_noise(struct b43_wldev *dev) average -= 48; dev->stats.link_noise = average; - drop_calculation: dev->noisecalc.calculation_running = 0; return; } - generate_new: +generate_new: b43_generate_noise_sample(dev); } diff --git a/drivers/net/wireless/hostap/hostap_main.c b/drivers/net/wireless/hostap/hostap_main.c index 20d387f6658..f7aec9309d0 100644 --- a/drivers/net/wireless/hostap/hostap_main.c +++ b/drivers/net/wireless/hostap/hostap_main.c @@ -682,7 +682,13 @@ static int prism2_close(struct net_device *dev) netif_device_detach(dev); } - flush_scheduled_work(); + cancel_work_sync(&local->reset_queue); + cancel_work_sync(&local->set_multicast_list_queue); + cancel_work_sync(&local->set_tim_queue); +#ifndef PRISM2_NO_STATION_MODES + cancel_work_sync(&local->info_queue); +#endif + cancel_work_sync(&local->comms_qual_update); module_put(local->hw_module); diff --git a/drivers/net/wireless/rt2x00/Kconfig b/drivers/net/wireless/rt2x00/Kconfig index ab1029e7988..2d611876bbe 100644 --- a/drivers/net/wireless/rt2x00/Kconfig +++ b/drivers/net/wireless/rt2x00/Kconfig @@ -32,12 +32,13 @@ config RT2X00_LIB_FIRMWARE config RT2X00_LIB_RFKILL boolean depends on RT2X00_LIB + depends on INPUT select RFKILL select INPUT_POLLDEV config RT2X00_LIB_LEDS boolean - depends on RT2X00_LIB + depends on RT2X00_LIB && NEW_LEDS config RT2400PCI tristate "Ralink rt2400 pci/pcmcia support" @@ -51,7 +52,7 @@ config RT2400PCI config RT2400PCI_RFKILL bool "RT2400 rfkill support" - depends on RT2400PCI + depends on RT2400PCI && INPUT select RT2X00_LIB_RFKILL ---help--- This adds support for integrated rt2400 devices that feature a @@ -60,7 +61,7 @@ config RT2400PCI_RFKILL config RT2400PCI_LEDS bool "RT2400 leds support" - depends on RT2400PCI + depends on RT2400PCI && NEW_LEDS select LEDS_CLASS select RT2X00_LIB_LEDS ---help--- @@ -78,7 +79,7 @@ config RT2500PCI config RT2500PCI_RFKILL bool "RT2500 rfkill support" - depends on RT2500PCI + depends on RT2500PCI && INPUT select RT2X00_LIB_RFKILL ---help--- This adds support for integrated rt2500 devices that feature a @@ -87,7 +88,7 @@ config RT2500PCI_RFKILL config RT2500PCI_LEDS bool "RT2500 leds support" - depends on RT2500PCI + depends on RT2500PCI && NEW_LEDS select LEDS_CLASS select RT2X00_LIB_LEDS ---help--- @@ -107,7 +108,7 @@ config RT61PCI config RT61PCI_RFKILL bool "RT61 rfkill support" - depends on RT61PCI + depends on RT61PCI && INPUT select RT2X00_LIB_RFKILL ---help--- This adds support for integrated rt61 devices that feature a @@ -116,7 +117,7 @@ config RT61PCI_RFKILL config RT61PCI_LEDS bool "RT61 leds support" - depends on RT61PCI + depends on RT61PCI && NEW_LEDS select LEDS_CLASS select RT2X00_LIB_LEDS ---help--- @@ -133,7 +134,7 @@ config RT2500USB config RT2500USB_LEDS bool "RT2500 leds support" - depends on RT2500USB + depends on RT2500USB && NEW_LEDS select LEDS_CLASS select RT2X00_LIB_LEDS ---help--- @@ -152,7 +153,7 @@ config RT73USB config RT73USB_LEDS bool "RT73 leds support" - depends on RT73USB + depends on RT73USB && NEW_LEDS select LEDS_CLASS select RT2X00_LIB_LEDS ---help--- diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.c b/drivers/net/wireless/rt2x00/rt2x00pci.c index 971af2546b5..60893de3bf8 100644 --- a/drivers/net/wireless/rt2x00/rt2x00pci.c +++ b/drivers/net/wireless/rt2x00/rt2x00pci.c @@ -412,8 +412,7 @@ int rt2x00pci_probe(struct pci_dev *pci_dev, const struct pci_device_id *id) if (pci_set_mwi(pci_dev)) ERROR_PROBE("MWI not available.\n"); - if (pci_set_dma_mask(pci_dev, DMA_64BIT_MASK) && - pci_set_dma_mask(pci_dev, DMA_32BIT_MASK)) { + if (pci_set_dma_mask(pci_dev, DMA_32BIT_MASK)) { ERROR_PROBE("PCI DMA not supported.\n"); retval = -EIO; goto exit_disable_device; diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c index 5a331674dcb..e5ceae805b5 100644 --- a/drivers/net/wireless/rt2x00/rt2x00usb.c +++ b/drivers/net/wireless/rt2x00/rt2x00usb.c @@ -362,6 +362,12 @@ void rt2x00usb_disable_radio(struct rt2x00_dev *rt2x00dev) } } + /* + * Kill guardian urb (if required by driver). + */ + if (!test_bit(DRIVER_REQUIRE_BEACON_GUARD, &rt2x00dev->flags)) + return; + for (i = 0; i < rt2x00dev->bcn->limit; i++) { priv_bcn = rt2x00dev->bcn->entries[i].priv_data; usb_kill_urb(priv_bcn->urb); diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c index da19a3a91f4..fff8386e816 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.c +++ b/drivers/net/wireless/rt2x00/rt73usb.c @@ -2131,6 +2131,7 @@ static struct usb_device_id rt73usb_device_table[] = { /* D-Link */ { USB_DEVICE(0x07d1, 0x3c03), USB_DEVICE_DATA(&rt73usb_ops) }, { USB_DEVICE(0x07d1, 0x3c04), USB_DEVICE_DATA(&rt73usb_ops) }, + { USB_DEVICE(0x07d1, 0x3c06), USB_DEVICE_DATA(&rt73usb_ops) }, { USB_DEVICE(0x07d1, 0x3c07), USB_DEVICE_DATA(&rt73usb_ops) }, /* Gemtek */ { USB_DEVICE(0x15a9, 0x0004), USB_DEVICE_DATA(&rt73usb_ops) }, diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c index 72cf61ed8f9..e1637bd82b8 100644 --- a/drivers/pci/pci-driver.c +++ b/drivers/pci/pci-driver.c @@ -181,7 +181,7 @@ static int pci_call_probe(struct pci_driver *drv, struct pci_dev *dev, any need to change it. */ struct mempolicy *oldpol; cpumask_t oldmask = current->cpus_allowed; - int node = pcibus_to_node(dev->bus); + int node = dev_to_node(&dev->dev); if (node >= 0) { node_to_cpumask_ptr(nodecpumask, node); diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c index 271d41cc05a..6f3c7446c32 100644 --- a/drivers/pci/pci-sysfs.c +++ b/drivers/pci/pci-sysfs.c @@ -489,13 +489,13 @@ pci_mmap_legacy_mem(struct kobject *kobj, struct bin_attribute *attr, * @kobj: kobject for mapping * @attr: struct bin_attribute for the file being mapped * @vma: struct vm_area_struct passed into the mmap + * @write_combine: 1 for write_combine mapping * * Use the regular PCI mapping routines to map a PCI resource into userspace. - * FIXME: write combining? maybe automatic for prefetchable regions? */ static int pci_mmap_resource(struct kobject *kobj, struct bin_attribute *attr, - struct vm_area_struct *vma) + struct vm_area_struct *vma, int write_combine) { struct pci_dev *pdev = to_pci_dev(container_of(kobj, struct device, kobj)); @@ -518,7 +518,21 @@ pci_mmap_resource(struct kobject *kobj, struct bin_attribute *attr, vma->vm_pgoff += start >> PAGE_SHIFT; mmap_type = res->flags & IORESOURCE_MEM ? pci_mmap_mem : pci_mmap_io; - return pci_mmap_page_range(pdev, vma, mmap_type, 0); + return pci_mmap_page_range(pdev, vma, mmap_type, write_combine); +} + +static int +pci_mmap_resource_uc(struct kobject *kobj, struct bin_attribute *attr, + struct vm_area_struct *vma) +{ + return pci_mmap_resource(kobj, attr, vma, 0); +} + +static int +pci_mmap_resource_wc(struct kobject *kobj, struct bin_attribute *attr, + struct vm_area_struct *vma) +{ + return pci_mmap_resource(kobj, attr, vma, 1); } /** @@ -541,9 +555,46 @@ pci_remove_resource_files(struct pci_dev *pdev) sysfs_remove_bin_file(&pdev->dev.kobj, res_attr); kfree(res_attr); } + + res_attr = pdev->res_attr_wc[i]; + if (res_attr) { + sysfs_remove_bin_file(&pdev->dev.kobj, res_attr); + kfree(res_attr); + } } } +static int pci_create_attr(struct pci_dev *pdev, int num, int write_combine) +{ + /* allocate attribute structure, piggyback attribute name */ + int name_len = write_combine ? 13 : 10; + struct bin_attribute *res_attr; + int retval; + + res_attr = kzalloc(sizeof(*res_attr) + name_len, GFP_ATOMIC); + if (res_attr) { + char *res_attr_name = (char *)(res_attr + 1); + + if (write_combine) { + pdev->res_attr_wc[num] = res_attr; + sprintf(res_attr_name, "resource%d_wc", num); + res_attr->mmap = pci_mmap_resource_wc; + } else { + pdev->res_attr[num] = res_attr; + sprintf(res_attr_name, "resource%d", num); + res_attr->mmap = pci_mmap_resource_uc; + } + res_attr->attr.name = res_attr_name; + res_attr->attr.mode = S_IRUSR | S_IWUSR; + res_attr->size = pci_resource_len(pdev, num); + res_attr->private = &pdev->resource[num]; + retval = sysfs_create_bin_file(&pdev->dev.kobj, res_attr); + } else + retval = -ENOMEM; + + return retval; +} + /** * pci_create_resource_files - create resource files in sysfs for @dev * @dev: dev in question @@ -557,31 +608,19 @@ static int pci_create_resource_files(struct pci_dev *pdev) /* Expose the PCI resources from this device as files */ for (i = 0; i < PCI_ROM_RESOURCE; i++) { - struct bin_attribute *res_attr; /* skip empty resources */ if (!pci_resource_len(pdev, i)) continue; - /* allocate attribute structure, piggyback attribute name */ - res_attr = kzalloc(sizeof(*res_attr) + 10, GFP_ATOMIC); - if (res_attr) { - char *res_attr_name = (char *)(res_attr + 1); - - pdev->res_attr[i] = res_attr; - sprintf(res_attr_name, "resource%d", i); - res_attr->attr.name = res_attr_name; - res_attr->attr.mode = S_IRUSR | S_IWUSR; - res_attr->size = pci_resource_len(pdev, i); - res_attr->mmap = pci_mmap_resource; - res_attr->private = &pdev->resource[i]; - retval = sysfs_create_bin_file(&pdev->dev.kobj, res_attr); - if (retval) { - pci_remove_resource_files(pdev); - return retval; - } - } else { - return -ENOMEM; + retval = pci_create_attr(pdev, i, 0); + /* for prefetchable resources, create a WC mappable file */ + if (!retval && pdev->resource[i].flags & IORESOURCE_PREFETCH) + retval = pci_create_attr(pdev, i, 1); + + if (retval) { + pci_remove_resource_files(pdev); + return retval; } } return 0; diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index 60f8afc7a56..4949dc4859b 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -256,6 +256,17 @@ config RTC_DRV_S35390A This driver can also be built as a module. If so the module will be called rtc-s35390a. +config RTC_DRV_FM3130 + tristate "Ramtron FM3130" + help + If you say Y here you will get support for the + Ramtron FM3130 RTC chips. + Ramtron FM3130 is a chip with two separate devices inside, + RTC clock and FRAM. This driver provides only RTC functionality. + + This driver can also be built as a module. If so the module + will be called rtc-fm3130. + endif # I2C comment "SPI RTC drivers" diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile index ebe871cf16c..b6e14d51670 100644 --- a/drivers/rtc/Makefile +++ b/drivers/rtc/Makefile @@ -31,6 +31,7 @@ obj-$(CONFIG_RTC_DRV_DS1553) += rtc-ds1553.o obj-$(CONFIG_RTC_DRV_DS1672) += rtc-ds1672.o obj-$(CONFIG_RTC_DRV_DS1742) += rtc-ds1742.o obj-$(CONFIG_RTC_DRV_EP93XX) += rtc-ep93xx.o +obj-$(CONFIG_RTC_DRV_FM3130) += rtc-fm3130.o obj-$(CONFIG_RTC_DRV_ISL1208) += rtc-isl1208.o obj-$(CONFIG_RTC_DRV_M41T80) += rtc-m41t80.o obj-$(CONFIG_RTC_DRV_M48T59) += rtc-m48t59.o @@ -41,6 +42,7 @@ obj-$(CONFIG_RTC_DRV_OMAP) += rtc-omap.o obj-$(CONFIG_RTC_DRV_PCF8563) += rtc-pcf8563.o obj-$(CONFIG_RTC_DRV_PCF8583) += rtc-pcf8583.o obj-$(CONFIG_RTC_DRV_PL031) += rtc-pl031.o +obj-$(CONFIG_RTC_DRV_PPC) += rtc-ppc.o obj-$(CONFIG_RTC_DRV_R9701) += rtc-r9701.o obj-$(CONFIG_RTC_DRV_RS5C313) += rtc-rs5c313.o obj-$(CONFIG_RTC_DRV_RS5C348) += rtc-rs5c348.o @@ -54,4 +56,3 @@ obj-$(CONFIG_RTC_DRV_TEST) += rtc-test.o obj-$(CONFIG_RTC_DRV_V3020) += rtc-v3020.o obj-$(CONFIG_RTC_DRV_VR41XX) += rtc-vr41xx.o obj-$(CONFIG_RTC_DRV_X1205) += rtc-x1205.o -obj-$(CONFIG_RTC_DRV_PPC) += rtc-ppc.o diff --git a/drivers/rtc/rtc-at32ap700x.c b/drivers/rtc/rtc-at32ap700x.c index 42244f14b41..2ef8cdfda4a 100644 --- a/drivers/rtc/rtc-at32ap700x.c +++ b/drivers/rtc/rtc-at32ap700x.c @@ -94,8 +94,11 @@ static int at32_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm) { struct rtc_at32ap700x *rtc = dev_get_drvdata(dev); + spin_lock_irq(&rtc->lock); rtc_time_to_tm(rtc->alarm_time, &alrm->time); - alrm->pending = rtc_readl(rtc, IMR) & RTC_BIT(IMR_TOPI) ? 1 : 0; + alrm->enabled = rtc_readl(rtc, IMR) & RTC_BIT(IMR_TOPI) ? 1 : 0; + alrm->pending = rtc_readl(rtc, ISR) & RTC_BIT(ISR_TOPI) ? 1 : 0; + spin_unlock_irq(&rtc->lock); return 0; } @@ -119,7 +122,7 @@ static int at32_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm) spin_lock_irq(&rtc->lock); rtc->alarm_time = alarm_unix_time; rtc_writel(rtc, TOP, rtc->alarm_time); - if (alrm->pending) + if (alrm->enabled) rtc_writel(rtc, CTRL, rtc_readl(rtc, CTRL) | RTC_BIT(CTRL_TOPEN)); else diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c index d060a06ce05..d7bb9bac71d 100644 --- a/drivers/rtc/rtc-cmos.c +++ b/drivers/rtc/rtc-cmos.c @@ -905,19 +905,7 @@ static struct pnp_driver cmos_pnp_driver = { .resume = cmos_pnp_resume, }; -static int __init cmos_init(void) -{ - return pnp_register_driver(&cmos_pnp_driver); -} -module_init(cmos_init); - -static void __exit cmos_exit(void) -{ - pnp_unregister_driver(&cmos_pnp_driver); -} -module_exit(cmos_exit); - -#else /* no PNP */ +#endif /* CONFIG_PNP */ /*----------------------------------------------------------------*/ @@ -958,20 +946,33 @@ static struct platform_driver cmos_platform_driver = { static int __init cmos_init(void) { +#ifdef CONFIG_PNP + if (pnp_platform_devices) + return pnp_register_driver(&cmos_pnp_driver); + else + return platform_driver_probe(&cmos_platform_driver, + cmos_platform_probe); +#else return platform_driver_probe(&cmos_platform_driver, cmos_platform_probe); +#endif /* CONFIG_PNP */ } module_init(cmos_init); static void __exit cmos_exit(void) { +#ifdef CONFIG_PNP + if (pnp_platform_devices) + pnp_unregister_driver(&cmos_pnp_driver); + else + platform_driver_unregister(&cmos_platform_driver); +#else platform_driver_unregister(&cmos_platform_driver); +#endif /* CONFIG_PNP */ } module_exit(cmos_exit); -#endif /* !PNP */ - MODULE_AUTHOR("David Brownell"); MODULE_DESCRIPTION("Driver for PC-style 'CMOS' RTCs"); MODULE_LICENSE("GPL"); diff --git a/drivers/rtc/rtc-fm3130.c b/drivers/rtc/rtc-fm3130.c new file mode 100644 index 00000000000..11644c8fca8 --- /dev/null +++ b/drivers/rtc/rtc-fm3130.c @@ -0,0 +1,501 @@ +/* + * rtc-fm3130.c - RTC driver for Ramtron FM3130 I2C chip. + * + * Copyright (C) 2008 Sergey Lapin + * Based on ds1307 driver by James Chapman and David Brownell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/rtc.h> +#include <linux/bcd.h> + +#define FM3130_RTC_CONTROL (0x0) +#define FM3130_CAL_CONTROL (0x1) +#define FM3130_RTC_SECONDS (0x2) +#define FM3130_RTC_MINUTES (0x3) +#define FM3130_RTC_HOURS (0x4) +#define FM3130_RTC_DAY (0x5) +#define FM3130_RTC_DATE (0x6) +#define FM3130_RTC_MONTHS (0x7) +#define FM3130_RTC_YEARS (0x8) + +#define FM3130_ALARM_SECONDS (0x9) +#define FM3130_ALARM_MINUTES (0xa) +#define FM3130_ALARM_HOURS (0xb) +#define FM3130_ALARM_DATE (0xc) +#define FM3130_ALARM_MONTHS (0xd) +#define FM3130_ALARM_WP_CONTROL (0xe) + +#define FM3130_CAL_CONTROL_BIT_nOSCEN (1 << 7) /* Osciallator enabled */ +#define FM3130_RTC_CONTROL_BIT_LB (1 << 7) /* Low battery */ +#define FM3130_RTC_CONTROL_BIT_AF (1 << 6) /* Alarm flag */ +#define FM3130_RTC_CONTROL_BIT_CF (1 << 5) /* Century overflow */ +#define FM3130_RTC_CONTROL_BIT_POR (1 << 4) /* Power on reset */ +#define FM3130_RTC_CONTROL_BIT_AEN (1 << 3) /* Alarm enable */ +#define FM3130_RTC_CONTROL_BIT_CAL (1 << 2) /* Calibration mode */ +#define FM3130_RTC_CONTROL_BIT_WRITE (1 << 1) /* W=1 -> write mode W=0 normal */ +#define FM3130_RTC_CONTROL_BIT_READ (1 << 0) /* R=1 -> read mode R=0 normal */ + +#define FM3130_CLOCK_REGS 7 +#define FM3130_ALARM_REGS 5 + +struct fm3130 { + u8 reg_addr_time; + u8 reg_addr_alarm; + u8 regs[15]; + struct i2c_msg msg[4]; + struct i2c_client *client; + struct rtc_device *rtc; + int data_valid; + int alarm; +}; +static const struct i2c_device_id fm3130_id[] = { + { "fm3130-rtc", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, fm3130_id); + +#define FM3130_MODE_NORMAL 0 +#define FM3130_MODE_WRITE 1 +#define FM3130_MODE_READ 2 + +static void fm3130_rtc_mode(struct device *dev, int mode) +{ + struct fm3130 *fm3130 = dev_get_drvdata(dev); + + fm3130->regs[FM3130_RTC_CONTROL] = + i2c_smbus_read_byte_data(fm3130->client, FM3130_RTC_CONTROL); + switch (mode) { + case FM3130_MODE_NORMAL: + fm3130->regs[FM3130_RTC_CONTROL] &= + ~(FM3130_RTC_CONTROL_BIT_WRITE | + FM3130_RTC_CONTROL_BIT_READ); + break; + case FM3130_MODE_WRITE: + fm3130->regs[FM3130_RTC_CONTROL] |= FM3130_RTC_CONTROL_BIT_WRITE; + break; + case FM3130_MODE_READ: + fm3130->regs[FM3130_RTC_CONTROL] |= FM3130_RTC_CONTROL_BIT_READ; + break; + default: + dev_dbg(dev, "invalid mode %d\n", mode); + break; + } + /* Checking for alarm */ + if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_AF) { + fm3130->alarm = 1; + fm3130->regs[FM3130_RTC_CONTROL] &= ~FM3130_RTC_CONTROL_BIT_AF; + } + i2c_smbus_write_byte_data(fm3130->client, + FM3130_RTC_CONTROL, fm3130->regs[FM3130_RTC_CONTROL]); +} + +static int fm3130_get_time(struct device *dev, struct rtc_time *t) +{ + struct fm3130 *fm3130 = dev_get_drvdata(dev); + int tmp; + + if (!fm3130->data_valid) { + /* We have invalid data in RTC, probably due + to battery faults or other problems. Return EIO + for now, it will allow us to set data later insted + of error during probing which disables device */ + return -EIO; + } + fm3130_rtc_mode(dev, FM3130_MODE_READ); + + /* read the RTC date and time registers all at once */ + tmp = i2c_transfer(to_i2c_adapter(fm3130->client->dev.parent), + fm3130->msg, 2); + if (tmp != 2) { + dev_err(dev, "%s error %d\n", "read", tmp); + return -EIO; + } + + fm3130_rtc_mode(dev, FM3130_MODE_NORMAL); + + dev_dbg(dev, "%s: %02x %02x %02x %02x %02x %02x %02x %02x" + "%02x %02x %02x %02x %02x %02x %02x\n", + "read", + fm3130->regs[0], fm3130->regs[1], + fm3130->regs[2], fm3130->regs[3], + fm3130->regs[4], fm3130->regs[5], + fm3130->regs[6], fm3130->regs[7], + fm3130->regs[8], fm3130->regs[9], + fm3130->regs[0xa], fm3130->regs[0xb], + fm3130->regs[0xc], fm3130->regs[0xd], + fm3130->regs[0xe]); + + t->tm_sec = BCD2BIN(fm3130->regs[FM3130_RTC_SECONDS] & 0x7f); + t->tm_min = BCD2BIN(fm3130->regs[FM3130_RTC_MINUTES] & 0x7f); + tmp = fm3130->regs[FM3130_RTC_HOURS] & 0x3f; + t->tm_hour = BCD2BIN(tmp); + t->tm_wday = BCD2BIN(fm3130->regs[FM3130_RTC_DAY] & 0x07) - 1; + t->tm_mday = BCD2BIN(fm3130->regs[FM3130_RTC_DATE] & 0x3f); + tmp = fm3130->regs[FM3130_RTC_MONTHS] & 0x1f; + t->tm_mon = BCD2BIN(tmp) - 1; + + /* assume 20YY not 19YY, and ignore CF bit */ + t->tm_year = BCD2BIN(fm3130->regs[FM3130_RTC_YEARS]) + 100; + + dev_dbg(dev, "%s secs=%d, mins=%d, " + "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n", + "read", t->tm_sec, t->tm_min, + t->tm_hour, t->tm_mday, + t->tm_mon, t->tm_year, t->tm_wday); + + /* initial clock setting can be undefined */ + return rtc_valid_tm(t); +} + + +static int fm3130_set_time(struct device *dev, struct rtc_time *t) +{ + struct fm3130 *fm3130 = dev_get_drvdata(dev); + int tmp, i; + u8 *buf = fm3130->regs; + + dev_dbg(dev, "%s secs=%d, mins=%d, " + "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n", + "write", t->tm_sec, t->tm_min, + t->tm_hour, t->tm_mday, + t->tm_mon, t->tm_year, t->tm_wday); + + /* first register addr */ + buf[FM3130_RTC_SECONDS] = BIN2BCD(t->tm_sec); + buf[FM3130_RTC_MINUTES] = BIN2BCD(t->tm_min); + buf[FM3130_RTC_HOURS] = BIN2BCD(t->tm_hour); + buf[FM3130_RTC_DAY] = BIN2BCD(t->tm_wday + 1); + buf[FM3130_RTC_DATE] = BIN2BCD(t->tm_mday); + buf[FM3130_RTC_MONTHS] = BIN2BCD(t->tm_mon + 1); + + /* assume 20YY not 19YY */ + tmp = t->tm_year - 100; + buf[FM3130_RTC_YEARS] = BIN2BCD(tmp); + + dev_dbg(dev, "%s: %02x %02x %02x %02x %02x %02x %02x" + "%02x %02x %02x %02x %02x %02x %02x %02x\n", + "write", buf[0], buf[1], buf[2], buf[3], + buf[4], buf[5], buf[6], buf[7], + buf[8], buf[9], buf[0xa], buf[0xb], + buf[0xc], buf[0xd], buf[0xe]); + + fm3130_rtc_mode(dev, FM3130_MODE_WRITE); + + /* Writing time registers, we don't support multibyte transfers */ + for (i = 0; i < FM3130_CLOCK_REGS; i++) { + i2c_smbus_write_byte_data(fm3130->client, + FM3130_RTC_SECONDS + i, + fm3130->regs[FM3130_RTC_SECONDS + i]); + } + + fm3130_rtc_mode(dev, FM3130_MODE_NORMAL); + + /* We assume here that data are valid once written */ + if (!fm3130->data_valid) + fm3130->data_valid = 1; + return 0; +} + +static int fm3130_read_alarm(struct device *dev, struct rtc_wkalrm *alrm) +{ + struct fm3130 *fm3130 = dev_get_drvdata(dev); + int tmp; + struct rtc_time *tm = &alrm->time; + /* read the RTC alarm registers all at once */ + tmp = i2c_transfer(to_i2c_adapter(fm3130->client->dev.parent), + &fm3130->msg[2], 2); + if (tmp != 2) { + dev_err(dev, "%s error %d\n", "read", tmp); + return -EIO; + } + dev_dbg(dev, "alarm read %02x %02x %02x %02x %02x\n", + fm3130->regs[FM3130_ALARM_SECONDS], + fm3130->regs[FM3130_ALARM_MINUTES], + fm3130->regs[FM3130_ALARM_HOURS], + fm3130->regs[FM3130_ALARM_DATE], + fm3130->regs[FM3130_ALARM_MONTHS]); + + + tm->tm_sec = BCD2BIN(fm3130->regs[FM3130_ALARM_SECONDS] & 0x7F); + tm->tm_min = BCD2BIN(fm3130->regs[FM3130_ALARM_MINUTES] & 0x7F); + tm->tm_hour = BCD2BIN(fm3130->regs[FM3130_ALARM_HOURS] & 0x3F); + tm->tm_mday = BCD2BIN(fm3130->regs[FM3130_ALARM_DATE] & 0x3F); + tm->tm_mon = BCD2BIN(fm3130->regs[FM3130_ALARM_MONTHS] & 0x1F); + if (tm->tm_mon > 0) + tm->tm_mon -= 1; /* RTC is 1-12, tm_mon is 0-11 */ + dev_dbg(dev, "%s secs=%d, mins=%d, " + "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n", + "read alarm", tm->tm_sec, tm->tm_min, + tm->tm_hour, tm->tm_mday, + tm->tm_mon, tm->tm_year, tm->tm_wday); + + return 0; +} + +static int fm3130_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) +{ + struct fm3130 *fm3130 = dev_get_drvdata(dev); + struct rtc_time *tm = &alrm->time; + int i; + + dev_dbg(dev, "%s secs=%d, mins=%d, " + "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n", + "write alarm", tm->tm_sec, tm->tm_min, + tm->tm_hour, tm->tm_mday, + tm->tm_mon, tm->tm_year, tm->tm_wday); + + if (tm->tm_sec != -1) + fm3130->regs[FM3130_ALARM_SECONDS] = + BIN2BCD(tm->tm_sec) | 0x80; + + if (tm->tm_min != -1) + fm3130->regs[FM3130_ALARM_MINUTES] = + BIN2BCD(tm->tm_min) | 0x80; + + if (tm->tm_hour != -1) + fm3130->regs[FM3130_ALARM_HOURS] = + BIN2BCD(tm->tm_hour) | 0x80; + + if (tm->tm_mday != -1) + fm3130->regs[FM3130_ALARM_DATE] = + BIN2BCD(tm->tm_mday) | 0x80; + + if (tm->tm_mon != -1) + fm3130->regs[FM3130_ALARM_MONTHS] = + BIN2BCD(tm->tm_mon + 1) | 0x80; + + dev_dbg(dev, "alarm write %02x %02x %02x %02x %02x\n", + fm3130->regs[FM3130_ALARM_SECONDS], + fm3130->regs[FM3130_ALARM_MINUTES], + fm3130->regs[FM3130_ALARM_HOURS], + fm3130->regs[FM3130_ALARM_DATE], + fm3130->regs[FM3130_ALARM_MONTHS]); + /* Writing time registers, we don't support multibyte transfers */ + for (i = 0; i < FM3130_ALARM_REGS; i++) { + i2c_smbus_write_byte_data(fm3130->client, + FM3130_ALARM_SECONDS + i, + fm3130->regs[FM3130_ALARM_SECONDS + i]); + } + fm3130->regs[FM3130_RTC_CONTROL] = + i2c_smbus_read_byte_data(fm3130->client, FM3130_RTC_CONTROL); + /* Checking for alarm */ + if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_AF) { + fm3130->alarm = 1; + fm3130->regs[FM3130_RTC_CONTROL] &= ~FM3130_RTC_CONTROL_BIT_AF; + } + if (alrm->enabled) { + i2c_smbus_write_byte_data(fm3130->client, FM3130_RTC_CONTROL, + (fm3130->regs[FM3130_RTC_CONTROL] & + ~(FM3130_RTC_CONTROL_BIT_CAL)) | + FM3130_RTC_CONTROL_BIT_AEN); + } else { + i2c_smbus_write_byte_data(fm3130->client, FM3130_RTC_CONTROL, + fm3130->regs[FM3130_RTC_CONTROL] & + ~(FM3130_RTC_CONTROL_BIT_AEN)); + } + return 0; +} + +static const struct rtc_class_ops fm3130_rtc_ops = { + .read_time = fm3130_get_time, + .set_time = fm3130_set_time, + .read_alarm = fm3130_read_alarm, + .set_alarm = fm3130_set_alarm, +}; + +static struct i2c_driver fm3130_driver; + +static int __devinit fm3130_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct fm3130 *fm3130; + int err = -ENODEV; + int tmp; + struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); + + if (!i2c_check_functionality(adapter, + I2C_FUNC_I2C | I2C_FUNC_SMBUS_WRITE_BYTE_DATA)) + return -EIO; + + fm3130 = kzalloc(sizeof(struct fm3130), GFP_KERNEL); + + if (!fm3130) + return -ENOMEM; + + fm3130->client = client; + i2c_set_clientdata(client, fm3130); + fm3130->reg_addr_time = FM3130_RTC_SECONDS; + fm3130->reg_addr_alarm = FM3130_ALARM_SECONDS; + + /* Messages to read time */ + fm3130->msg[0].addr = client->addr; + fm3130->msg[0].flags = 0; + fm3130->msg[0].len = 1; + fm3130->msg[0].buf = &fm3130->reg_addr_time; + + fm3130->msg[1].addr = client->addr; + fm3130->msg[1].flags = I2C_M_RD; + fm3130->msg[1].len = FM3130_CLOCK_REGS; + fm3130->msg[1].buf = &fm3130->regs[FM3130_RTC_SECONDS]; + + /* Messages to read alarm */ + fm3130->msg[2].addr = client->addr; + fm3130->msg[2].flags = 0; + fm3130->msg[2].len = 1; + fm3130->msg[2].buf = &fm3130->reg_addr_alarm; + + fm3130->msg[3].addr = client->addr; + fm3130->msg[3].flags = I2C_M_RD; + fm3130->msg[3].len = FM3130_ALARM_REGS; + fm3130->msg[3].buf = &fm3130->regs[FM3130_ALARM_SECONDS]; + + fm3130->data_valid = 0; + + tmp = i2c_transfer(adapter, fm3130->msg, 4); + if (tmp != 4) { + pr_debug("read error %d\n", tmp); + err = -EIO; + goto exit_free; + } + + fm3130->regs[FM3130_RTC_CONTROL] = + i2c_smbus_read_byte_data(client, FM3130_RTC_CONTROL); + fm3130->regs[FM3130_CAL_CONTROL] = + i2c_smbus_read_byte_data(client, FM3130_CAL_CONTROL); + + /* Checking for alarm */ + if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_AF) { + fm3130->alarm = 1; + fm3130->regs[FM3130_RTC_CONTROL] &= ~FM3130_RTC_CONTROL_BIT_AF; + } + + /* Disabling calibration mode */ + if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_CAL) + i2c_smbus_write_byte_data(client, FM3130_RTC_CONTROL, + fm3130->regs[FM3130_RTC_CONTROL] & + ~(FM3130_RTC_CONTROL_BIT_CAL)); + dev_warn(&client->dev, "Disabling calibration mode!\n"); + + /* Disabling read and write modes */ + if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_WRITE || + fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_READ) + i2c_smbus_write_byte_data(client, FM3130_RTC_CONTROL, + fm3130->regs[FM3130_RTC_CONTROL] & + ~(FM3130_RTC_CONTROL_BIT_READ | + FM3130_RTC_CONTROL_BIT_WRITE)); + dev_warn(&client->dev, "Disabling READ or WRITE mode!\n"); + + /* oscillator off? turn it on, so clock can tick. */ + if (fm3130->regs[FM3130_CAL_CONTROL] & FM3130_CAL_CONTROL_BIT_nOSCEN) + i2c_smbus_write_byte_data(client, FM3130_CAL_CONTROL, + fm3130->regs[FM3130_CAL_CONTROL] & + ~(FM3130_CAL_CONTROL_BIT_nOSCEN)); + + /* oscillator fault? clear flag, and warn */ + if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_LB) + dev_warn(&client->dev, "Low battery!\n"); + + /* oscillator fault? clear flag, and warn */ + if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_POR) { + i2c_smbus_write_byte_data(client, FM3130_RTC_CONTROL, + fm3130->regs[FM3130_RTC_CONTROL] & + ~FM3130_RTC_CONTROL_BIT_POR); + dev_warn(&client->dev, "SET TIME!\n"); + } + /* ACS is controlled by alarm */ + i2c_smbus_write_byte_data(client, FM3130_ALARM_WP_CONTROL, 0x80); + + /* TODO */ + /* TODO need to sanity check alarm */ + tmp = fm3130->regs[FM3130_RTC_SECONDS]; + tmp = BCD2BIN(tmp & 0x7f); + if (tmp > 60) + goto exit_bad; + tmp = BCD2BIN(fm3130->regs[FM3130_RTC_MINUTES] & 0x7f); + if (tmp > 60) + goto exit_bad; + + tmp = BCD2BIN(fm3130->regs[FM3130_RTC_DATE] & 0x3f); + if (tmp == 0 || tmp > 31) + goto exit_bad; + + tmp = BCD2BIN(fm3130->regs[FM3130_RTC_MONTHS] & 0x1f); + if (tmp == 0 || tmp > 12) + goto exit_bad; + + tmp = fm3130->regs[FM3130_RTC_HOURS]; + + fm3130->data_valid = 1; + +exit_bad: + if (!fm3130->data_valid) + dev_dbg(&client->dev, + "%s: %02x %02x %02x %02x %02x %02x %02x %02x" + "%02x %02x %02x %02x %02x %02x %02x\n", + "bogus registers", + fm3130->regs[0], fm3130->regs[1], + fm3130->regs[2], fm3130->regs[3], + fm3130->regs[4], fm3130->regs[5], + fm3130->regs[6], fm3130->regs[7], + fm3130->regs[8], fm3130->regs[9], + fm3130->regs[0xa], fm3130->regs[0xb], + fm3130->regs[0xc], fm3130->regs[0xd], + fm3130->regs[0xe]); + + /* We won't bail out here because we just got invalid data. + Time setting from u-boot doesn't work anyway */ + fm3130->rtc = rtc_device_register(client->name, &client->dev, + &fm3130_rtc_ops, THIS_MODULE); + if (IS_ERR(fm3130->rtc)) { + err = PTR_ERR(fm3130->rtc); + dev_err(&client->dev, + "unable to register the class device\n"); + goto exit_free; + } + return 0; +exit_free: + kfree(fm3130); + return err; +} + +static int __devexit fm3130_remove(struct i2c_client *client) +{ + struct fm3130 *fm3130 = i2c_get_clientdata(client); + + rtc_device_unregister(fm3130->rtc); + kfree(fm3130); + return 0; +} + +static struct i2c_driver fm3130_driver = { + .driver = { + .name = "rtc-fm3130", + .owner = THIS_MODULE, + }, + .probe = fm3130_probe, + .remove = __devexit_p(fm3130_remove), + .id_table = fm3130_id, +}; + +static int __init fm3130_init(void) +{ + return i2c_add_driver(&fm3130_driver); +} +module_init(fm3130_init); + +static void __exit fm3130_exit(void) +{ + i2c_del_driver(&fm3130_driver); +} +module_exit(fm3130_exit); + +MODULE_DESCRIPTION("RTC driver for FM3130"); +MODULE_AUTHOR("Sergey Lapin <slapin@ossfans.org>"); +MODULE_LICENSE("GPL"); + diff --git a/drivers/scsi/dpt/dptsig.h b/drivers/scsi/dpt/dptsig.h index 72c8992fdf2..a6644b332b5 100644 --- a/drivers/scsi/dpt/dptsig.h +++ b/drivers/scsi/dpt/dptsig.h @@ -85,7 +85,7 @@ typedef unsigned int sigINT; /* ------------------------------------------------------------------ */ /* What type of processor the file is meant to run on. */ /* This will let us know whether to read sigWORDs as high/low or low/high. */ -#define PROC_INTEL 0x00 /* Intel 80x86 */ +#define PROC_INTEL 0x00 /* Intel 80x86/ia64 */ #define PROC_MOTOROLA 0x01 /* Motorola 68K */ #define PROC_MIPS4000 0x02 /* MIPS RISC 4000 */ #define PROC_ALPHA 0x03 /* DEC Alpha */ @@ -104,6 +104,7 @@ typedef unsigned int sigINT; #define PROC_486 0x08 /* Intel 80486 */ #define PROC_PENTIUM 0x10 /* Intel 586 aka P5 aka Pentium */ #define PROC_SEXIUM 0x20 /* Intel 686 aka P6 aka Pentium Pro or MMX */ +#define PROC_IA64 0x40 /* Intel IA64 processor */ /* PROC_i960: */ #define PROC_960RX 0x01 /* Intel 80960RC/RD */ diff --git a/drivers/scsi/hosts.c b/drivers/scsi/hosts.c index 3690360d7a7..c6457bfc8a4 100644 --- a/drivers/scsi/hosts.c +++ b/drivers/scsi/hosts.c @@ -456,6 +456,10 @@ static int __scsi_host_match(struct device *dev, void *data) * * Return value: * A pointer to located Scsi_Host or NULL. + * + * The caller must do a scsi_host_put() to drop the reference + * that scsi_host_get() took. The put_device() below dropped + * the reference from class_find_device(). **/ struct Scsi_Host *scsi_host_lookup(unsigned short hostnum) { @@ -463,9 +467,10 @@ struct Scsi_Host *scsi_host_lookup(unsigned short hostnum) struct Scsi_Host *shost = ERR_PTR(-ENXIO); cdev = class_find_device(&shost_class, &hostnum, __scsi_host_match); - if (cdev) + if (cdev) { shost = scsi_host_get(class_to_shost(cdev)); - + put_device(cdev); + } return shost; } EXPORT_SYMBOL(scsi_host_lookup); diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c index 7ee86d4a761..c82df8bd4d8 100644 --- a/drivers/scsi/sr.c +++ b/drivers/scsi/sr.c @@ -178,6 +178,9 @@ int sr_test_unit_ready(struct scsi_device *sdev, struct scsi_sense_hdr *sshdr) the_result = scsi_execute_req(sdev, cmd, DMA_NONE, NULL, 0, sshdr, SR_TIMEOUT, retries--); + if (scsi_sense_valid(sshdr) && + sshdr->sense_key == UNIT_ATTENTION) + sdev->changed = 1; } while (retries > 0 && (!scsi_status_is_good(the_result) || diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index f20952c43cb..fd9bb777df2 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -49,6 +49,7 @@ #define DMA_RX_YCOUNT (PAGE_SIZE / DMA_RX_XCOUNT) #define DMA_RX_FLUSH_JIFFIES (HZ / 50) +#define CTS_CHECK_JIFFIES (HZ / 50) #ifdef CONFIG_SERIAL_BFIN_DMA static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart); @@ -290,11 +291,6 @@ static void bfin_serial_tx_chars(struct bfin_serial_port *uart) { struct circ_buf *xmit = &uart->port.info->xmit; - if (uart->port.x_char) { - UART_PUT_CHAR(uart, uart->port.x_char); - uart->port.icount.tx++; - uart->port.x_char = 0; - } /* * Check the modem control lines before * transmitting anything. @@ -306,6 +302,12 @@ static void bfin_serial_tx_chars(struct bfin_serial_port *uart) return; } + if (uart->port.x_char) { + UART_PUT_CHAR(uart, uart->port.x_char); + uart->port.icount.tx++; + uart->port.x_char = 0; + } + while ((UART_GET_LSR(uart) & THRE) && xmit->tail != xmit->head) { UART_PUT_CHAR(uart, xmit->buf[xmit->tail]); xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); @@ -345,15 +347,6 @@ static irqreturn_t bfin_serial_tx_int(int irq, void *dev_id) } #endif -#ifdef CONFIG_SERIAL_BFIN_CTSRTS -static void bfin_serial_do_work(struct work_struct *work) -{ - struct bfin_serial_port *uart = container_of(work, struct bfin_serial_port, cts_workqueue); - - bfin_serial_mctrl_check(uart); -} -#endif - #ifdef CONFIG_SERIAL_BFIN_DMA static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart) { @@ -361,6 +354,12 @@ static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart) uart->tx_done = 0; + /* + * Check the modem control lines before + * transmitting anything. + */ + bfin_serial_mctrl_check(uart); + if (uart_circ_empty(xmit) || uart_tx_stopped(&uart->port)) { uart->tx_count = 0; uart->tx_done = 1; @@ -373,12 +372,6 @@ static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart) uart->port.x_char = 0; } - /* - * Check the modem control lines before - * transmitting anything. - */ - bfin_serial_mctrl_check(uart); - uart->tx_count = CIRC_CNT(xmit->head, xmit->tail, UART_XMIT_SIZE); if (uart->tx_count > (UART_XMIT_SIZE - xmit->tail)) uart->tx_count = UART_XMIT_SIZE - xmit->tail; @@ -565,7 +558,10 @@ static void bfin_serial_mctrl_check(struct bfin_serial_port *uart) uart_handle_cts_change(&uart->port, status & TIOCM_CTS); if (!(status & TIOCM_CTS)) { tty->hw_stopped = 1; - schedule_work(&uart->cts_workqueue); + uart->cts_timer.data = (unsigned long)(uart); + uart->cts_timer.function = (void *)bfin_serial_mctrl_check; + uart->cts_timer.expires = jiffies + CTS_CHECK_JIFFIES; + add_timer(&(uart->cts_timer)); } else { tty->hw_stopped = 0; } @@ -885,7 +881,7 @@ static void __init bfin_serial_init_ports(void) init_timer(&(bfin_serial_ports[i].rx_dma_timer)); #endif #ifdef CONFIG_SERIAL_BFIN_CTSRTS - INIT_WORK(&bfin_serial_ports[i].cts_workqueue, bfin_serial_do_work); + init_timer(&(bfin_serial_ports[i].cts_timer)); bfin_serial_ports[i].cts_pin = bfin_serial_resource[i].uart_cts_pin; bfin_serial_ports[i].rts_pin = diff --git a/drivers/ssb/main.c b/drivers/ssb/main.c index 7cf8851286b..d184f2aea78 100644 --- a/drivers/ssb/main.c +++ b/drivers/ssb/main.c @@ -1168,15 +1168,21 @@ EXPORT_SYMBOL(ssb_dma_translation); int ssb_dma_set_mask(struct ssb_device *ssb_dev, u64 mask) { struct device *dma_dev = ssb_dev->dma_dev; + int err = 0; #ifdef CONFIG_SSB_PCIHOST - if (ssb_dev->bus->bustype == SSB_BUSTYPE_PCI) - return dma_set_mask(dma_dev, mask); + if (ssb_dev->bus->bustype == SSB_BUSTYPE_PCI) { + err = pci_set_dma_mask(ssb_dev->bus->host_pci, mask); + if (err) + return err; + err = pci_set_consistent_dma_mask(ssb_dev->bus->host_pci, mask); + return err; + } #endif dma_dev->coherent_dma_mask = mask; dma_dev->dma_mask = &dma_dev->coherent_dma_mask; - return 0; + return err; } EXPORT_SYMBOL(ssb_dma_set_mask); diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 3da1ab4b389..c070b34b669 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -47,6 +47,9 @@ static const struct usb_device_id usb_quirk_list[] = { /* Edirol SD-20 */ { USB_DEVICE(0x0582, 0x0027), .driver_info = USB_QUIRK_RESET_RESUME }, + /* appletouch */ + { USB_DEVICE(0x05ac, 0x021a), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Avision AV600U */ { USB_DEVICE(0x0638, 0x0a13), .driver_info = USB_QUIRK_STRING_FETCH_255 }, diff --git a/drivers/video/cirrusfb.c b/drivers/video/cirrusfb.c index 35ac9d956b3..c14b2435d23 100644 --- a/drivers/video/cirrusfb.c +++ b/drivers/video/cirrusfb.c @@ -2432,9 +2432,9 @@ static int cirrusfb_pci_register(struct pci_dev *pdev, info->screen_size = board_size; cinfo->unmap = cirrusfb_pci_unmap; - printk(KERN_INFO " RAM (%lu kB) at 0xx%lx, ", - info->screen_size >> 10, board_addr); - printk(KERN_INFO "Cirrus Logic chipset on PCI bus\n"); + printk(KERN_INFO "RAM (%lu kB) at 0x%lx, Cirrus " + "Logic chipset on PCI bus\n", + info->screen_size >> 10, board_addr); pci_set_drvdata(pdev, info); ret = cirrusfb_register(info); diff --git a/drivers/video/hgafb.c b/drivers/video/hgafb.c index fb9e6722854..c18880d9db1 100644 --- a/drivers/video/hgafb.c +++ b/drivers/video/hgafb.c @@ -279,7 +279,7 @@ static void hga_blank(int blank_mode) static int __init hga_card_detect(void) { - int count=0; + int count = 0; void __iomem *p, *q; unsigned short p_save, q_save; @@ -303,20 +303,18 @@ static int __init hga_card_detect(void) writew(0x55aa, p); if (readw(p) == 0x55aa) count++; writew(p_save, p); - if (count != 2) { - return 0; - } + if (count != 2) + goto error; /* Ok, there is definitely a card registering at the correct * memory location, so now we do an I/O port test. */ - if (!test_hga_b(0x66, 0x0f)) { /* cursor low register */ - return 0; - } - if (!test_hga_b(0x99, 0x0f)) { /* cursor low register */ - return 0; - } + if (!test_hga_b(0x66, 0x0f)) /* cursor low register */ + goto error; + + if (!test_hga_b(0x99, 0x0f)) /* cursor low register */ + goto error; /* See if the card is a Hercules, by checking whether the vsync * bit of the status register is changing. This test lasts for @@ -331,7 +329,7 @@ static int __init hga_card_detect(void) } if (p_save == q_save) - return 0; + goto error; switch (inb_p(HGA_STATUS_PORT) & 0x70) { case 0x10: @@ -348,6 +346,12 @@ static int __init hga_card_detect(void) break; } return 1; +error: + if (release_io_ports) + release_region(0x3b0, 12); + if (release_io_port) + release_region(0x3bf, 1); + return 0; } /** diff --git a/drivers/video/leo.c b/drivers/video/leo.c index 8bc46e93034..13fea61d6ae 100644 --- a/drivers/video/leo.c +++ b/drivers/video/leo.c @@ -17,8 +17,8 @@ #include <linux/fb.h> #include <linux/mm.h> #include <linux/of_device.h> +#include <linux/io.h> -#include <asm/io.h> #include <asm/fbio.h> #include "sbuslib.h" @@ -33,7 +33,6 @@ static int leo_blank(int, struct fb_info *); static int leo_mmap(struct fb_info *, struct vm_area_struct *); static int leo_ioctl(struct fb_info *, unsigned int, unsigned long); -static int leo_pan_display(struct fb_var_screeninfo *, struct fb_info *); /* * Frame buffer operations @@ -43,7 +42,6 @@ static struct fb_ops leo_ops = { .owner = THIS_MODULE, .fb_setcolreg = leo_setcolreg, .fb_blank = leo_blank, - .fb_pan_display = leo_pan_display, .fb_fillrect = cfb_fillrect, .fb_copyarea = cfb_copyarea, .fb_imageblit = cfb_imageblit, @@ -78,7 +76,7 @@ static struct fb_ops leo_ops = { #define LEO_CUR_TYPE_CMAP 0x00000050 struct leo_cursor { - u8 xxx0[16]; + u8 xxx0[16]; u32 cur_type; u32 cur_misc; u32 cur_cursxy; @@ -105,7 +103,7 @@ struct leo_lx_krn { struct leo_lc_ss0_krn { u32 misc; - u8 xxx0[0x800-4]; + u8 xxx0[0x800-4]; u32 rev; }; @@ -116,7 +114,7 @@ struct leo_lc_ss0_usr { u32 fontt; u32 extent; u32 src; - u32 dst; + u32 dst; u32 copy; u32 fill; }; @@ -129,8 +127,8 @@ struct leo_lc_ss1_usr { u8 unknown; }; -struct leo_ld { - u8 xxx0[0xe00]; +struct leo_ld_ss0 { + u8 xxx0[0xe00]; u32 csr; u32 wid; u32 wmask; @@ -144,13 +142,13 @@ struct leo_ld { u32 src; /* Copy/Scroll (SS0 only) */ u32 dst; /* Copy/Scroll/Fill (SS0 only) */ u32 extent; /* Copy/Scroll/Fill size (SS0 only) */ - u32 xxx1[3]; + u32 xxx1[3]; u32 setsem; /* SS1 only */ u32 clrsem; /* SS1 only */ u32 clrpick; /* SS1 only */ u32 clrdat; /* SS1 only */ u32 alpha; /* SS1 only */ - u8 xxx2[0x2c]; + u8 xxx2[0x2c]; u32 winbg; u32 planemask; u32 rop; @@ -199,11 +197,12 @@ struct leo_par { static void leo_wait(struct leo_lx_krn __iomem *lx_krn) { int i; - + for (i = 0; - (sbus_readl(&lx_krn->krn_csr) & LEO_KRN_CSR_PROGRESS) && i < 300000; + (sbus_readl(&lx_krn->krn_csr) & LEO_KRN_CSR_PROGRESS) && + i < 300000; i++) - udelay (1); /* Busy wait at most 0.3 sec */ + udelay(1); /* Busy wait at most 0.3 sec */ return; } @@ -221,7 +220,7 @@ static int leo_setcolreg(unsigned regno, unsigned transp, struct fb_info *info) { struct leo_par *par = (struct leo_par *) info->par; - struct leo_lx_krn __iomem *lx_krn = par->lx_krn; + struct leo_lx_krn __iomem *lx_krn = par->lx_krn; unsigned long flags; u32 val; int i; @@ -408,7 +407,7 @@ static void leo_wid_put(struct fb_info *info, struct fb_wid_list *wl) leo_wait(lx_krn); for (i = 0, wi = wl->wl_list; i < wl->wl_count; i++, wi++) { - switch(wi->wi_type) { + switch (wi->wi_type) { case FB_WID_DBL_8: j = (wi->wi_index & 0xf) + 0x40; break; @@ -453,13 +452,12 @@ static void leo_init_wids(struct fb_info *info) wi.wi_index = 1; wi.wi_values [0] = 0x30; leo_wid_put(info, &wl); - } static void leo_switch_from_graph(struct fb_info *info) { struct leo_par *par = (struct leo_par *) info->par; - struct leo_ld __iomem *ss = (struct leo_ld __iomem *) par->ld_ss0; + struct leo_ld_ss0 __iomem *ss = par->ld_ss0; unsigned long flags; u32 val; @@ -485,19 +483,13 @@ static void leo_switch_from_graph(struct fb_info *info) val = sbus_readl(&par->lc_ss0_usr->csr); } while (val & 0x20000000); - spin_unlock_irqrestore(&par->lock, flags); -} - -static int leo_pan_display(struct fb_var_screeninfo *var, struct fb_info *info) -{ - /* We just use this to catch switches out of - * graphics mode. - */ - leo_switch_from_graph(info); + /* setup screen buffer for cfb_* functions */ + sbus_writel(1, &ss->wid); + sbus_writel(0x00ffffff, &ss->planemask); + sbus_writel(0x310b90, &ss->rop); + sbus_writel(0, &par->lc_ss0_usr->addrspace); - if (var->xoffset || var->yoffset || var->vmode) - return -EINVAL; - return 0; + spin_unlock_irqrestore(&par->lock, flags); } static void leo_init_hw(struct fb_info *info) @@ -542,7 +534,8 @@ static void leo_unmap_regs(struct of_device *op, struct fb_info *info, of_iounmap(&op->resource[0], info->screen_base, 0x800000); } -static int __devinit leo_probe(struct of_device *op, const struct of_device_id *match) +static int __devinit leo_probe(struct of_device *op, + const struct of_device_id *match) { struct device_node *dp = op->node; struct fb_info *info; @@ -594,8 +587,9 @@ static int __devinit leo_probe(struct of_device *op, const struct of_device_id * !info->screen_base) goto out_unmap_regs; - info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN; + info->flags = FBINFO_DEFAULT; info->fbops = &leo_ops; + info->pseudo_palette = par->clut_data; leo_init_wids(info); leo_init_hw(info); @@ -649,7 +643,7 @@ static int __devexit leo_remove(struct of_device *op) static struct of_device_id leo_match[] = { { - .name = "leo", + .name = "SUNW,leo", }, {}, }; diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c index 274bc93ab7d..7dcda187d9b 100644 --- a/drivers/video/pxafb.c +++ b/drivers/video/pxafb.c @@ -573,8 +573,8 @@ static int setup_frame_dma(struct pxafb_info *fbi, int dma, int pal, dma_desc->fdadr = fbi->dma_buff_phys + dma_desc_off; fbi->fdadr[dma] = fbi->dma_buff_phys + dma_desc_off; } else { - pal_desc = &fbi->dma_buff->pal_desc[dma]; - pal_desc_off = offsetof(struct pxafb_dma_buff, dma_desc[pal]); + pal_desc = &fbi->dma_buff->pal_desc[pal]; + pal_desc_off = offsetof(struct pxafb_dma_buff, pal_desc[pal]); pal_desc->fsadr = fbi->dma_buff_phys + pal * PALETTE_SIZE; pal_desc->fidr = 0; @@ -1276,6 +1276,8 @@ static int __init pxafb_map_video_memory(struct pxafb_info *fbi) fbi->dma_buff_phys = fbi->map_dma; fbi->palette_cpu = (u16 *) fbi->dma_buff->palette; + pr_debug("pxafb: palette_mem_size = 0x%08lx\n", fbi->palette_size*sizeof(u16)); + #ifdef CONFIG_FB_PXA_SMARTPANEL fbi->smart_cmds = (uint16_t *) fbi->dma_buff->cmd_buff; fbi->n_smart_cmds = 0; diff --git a/drivers/virtio/virtio.c b/drivers/virtio/virtio.c index 0f3c2bb7bf3..7084e7e146c 100644 --- a/drivers/virtio/virtio.c +++ b/drivers/virtio/virtio.c @@ -124,9 +124,9 @@ static int virtio_dev_probe(struct device *_d) if (err) add_status(dev, VIRTIO_CONFIG_S_FAILED); else { - add_status(dev, VIRTIO_CONFIG_S_DRIVER_OK); /* They should never have set feature bits beyond 32 */ dev->config->set_features(dev, dev->features[0]); + add_status(dev, VIRTIO_CONFIG_S_DRIVER_OK); } return err; } diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile index 25b352b664d..8662a6b7a30 100644 --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile @@ -68,6 +68,7 @@ obj-$(CONFIG_WAFER_WDT) += wafer5823wdt.o obj-$(CONFIG_I6300ESB_WDT) += i6300esb.o obj-$(CONFIG_ITCO_WDT) += iTCO_wdt.o iTCO_vendor_support.o obj-$(CONFIG_IT8712F_WDT) += it8712f_wdt.o +CFLAGS_hpwdt.o += -O obj-$(CONFIG_HP_WATCHDOG) += hpwdt.o obj-$(CONFIG_SC1200_WDT) += sc1200wdt.o obj-$(CONFIG_SCx200_WDT) += scx200_wdt.o diff --git a/drivers/watchdog/hpwdt.c b/drivers/watchdog/hpwdt.c index 6a63535fc04..eaa3f2a79ff 100644 --- a/drivers/watchdog/hpwdt.c +++ b/drivers/watchdog/hpwdt.c @@ -140,49 +140,53 @@ static struct pci_device_id hpwdt_devices[] = { }; MODULE_DEVICE_TABLE(pci, hpwdt_devices); +extern asmlinkage void asminline_call(struct cmn_registers *pi86Regs, unsigned long *pRomEntry); + #ifndef CONFIG_X86_64 /* --32 Bit Bios------------------------------------------------------------ */ #define HPWDT_ARCH 32 -static void asminline_call(struct cmn_registers *pi86Regs, - unsigned long *pRomEntry) -{ - asm("pushl %ebp \n\t" - "movl %esp, %ebp \n\t" - "pusha \n\t" - "pushf \n\t" - "push %es \n\t" - "push %ds \n\t" - "pop %es \n\t" - "movl 8(%ebp),%eax \n\t" - "movl 4(%eax),%ebx \n\t" - "movl 8(%eax),%ecx \n\t" - "movl 12(%eax),%edx \n\t" - "movl 16(%eax),%esi \n\t" - "movl 20(%eax),%edi \n\t" - "movl (%eax),%eax \n\t" - "push %cs \n\t" - "call *12(%ebp) \n\t" - "pushf \n\t" - "pushl %eax \n\t" - "movl 8(%ebp),%eax \n\t" - "movl %ebx,4(%eax) \n\t" - "movl %ecx,8(%eax) \n\t" - "movl %edx,12(%eax) \n\t" - "movl %esi,16(%eax) \n\t" - "movl %edi,20(%eax) \n\t" - "movw %ds,24(%eax) \n\t" - "movw %es,26(%eax) \n\t" - "popl %ebx \n\t" - "movl %ebx,(%eax) \n\t" - "popl %ebx \n\t" - "movl %ebx,28(%eax) \n\t" - "pop %es \n\t" - "popf \n\t" - "popa \n\t" - "leave \n\t" "ret"); -} +asm(".text \n\t" + ".align 4 \n" + "asminline_call: \n\t" + "pushl %ebp \n\t" + "movl %esp, %ebp \n\t" + "pusha \n\t" + "pushf \n\t" + "push %es \n\t" + "push %ds \n\t" + "pop %es \n\t" + "movl 8(%ebp),%eax \n\t" + "movl 4(%eax),%ebx \n\t" + "movl 8(%eax),%ecx \n\t" + "movl 12(%eax),%edx \n\t" + "movl 16(%eax),%esi \n\t" + "movl 20(%eax),%edi \n\t" + "movl (%eax),%eax \n\t" + "push %cs \n\t" + "call *12(%ebp) \n\t" + "pushf \n\t" + "pushl %eax \n\t" + "movl 8(%ebp),%eax \n\t" + "movl %ebx,4(%eax) \n\t" + "movl %ecx,8(%eax) \n\t" + "movl %edx,12(%eax) \n\t" + "movl %esi,16(%eax) \n\t" + "movl %edi,20(%eax) \n\t" + "movw %ds,24(%eax) \n\t" + "movw %es,26(%eax) \n\t" + "popl %ebx \n\t" + "movl %ebx,(%eax) \n\t" + "popl %ebx \n\t" + "movl %ebx,28(%eax) \n\t" + "pop %es \n\t" + "popf \n\t" + "popa \n\t" + "leave \n\t" + "ret \n\t" + ".previous"); + /* * cru_detect @@ -333,43 +337,44 @@ static int __devinit detect_cru_service(void) #define HPWDT_ARCH 64 -static void asminline_call(struct cmn_registers *pi86Regs, - unsigned long *pRomEntry) -{ - asm("pushq %rbp \n\t" - "movq %rsp, %rbp \n\t" - "pushq %rax \n\t" - "pushq %rbx \n\t" - "pushq %rdx \n\t" - "pushq %r12 \n\t" - "pushq %r9 \n\t" - "movq %rsi, %r12 \n\t" - "movq %rdi, %r9 \n\t" - "movl 4(%r9),%ebx \n\t" - "movl 8(%r9),%ecx \n\t" - "movl 12(%r9),%edx \n\t" - "movl 16(%r9),%esi \n\t" - "movl 20(%r9),%edi \n\t" - "movl (%r9),%eax \n\t" - "call *%r12 \n\t" - "pushfq \n\t" - "popq %r12 \n\t" - "popfq \n\t" - "movl %eax, (%r9) \n\t" - "movl %ebx, 4(%r9) \n\t" - "movl %ecx, 8(%r9) \n\t" - "movl %edx, 12(%r9) \n\t" - "movl %esi, 16(%r9) \n\t" - "movl %edi, 20(%r9) \n\t" - "movq %r12, %rax \n\t" - "movl %eax, 28(%r9) \n\t" - "popq %r9 \n\t" - "popq %r12 \n\t" - "popq %rdx \n\t" - "popq %rbx \n\t" - "popq %rax \n\t" - "leave \n\t" "ret"); -} +asm(".text \n\t" + ".align 4 \n" + "asminline_call: \n\t" + "pushq %rbp \n\t" + "movq %rsp, %rbp \n\t" + "pushq %rax \n\t" + "pushq %rbx \n\t" + "pushq %rdx \n\t" + "pushq %r12 \n\t" + "pushq %r9 \n\t" + "movq %rsi, %r12 \n\t" + "movq %rdi, %r9 \n\t" + "movl 4(%r9),%ebx \n\t" + "movl 8(%r9),%ecx \n\t" + "movl 12(%r9),%edx \n\t" + "movl 16(%r9),%esi \n\t" + "movl 20(%r9),%edi \n\t" + "movl (%r9),%eax \n\t" + "call *%r12 \n\t" + "pushfq \n\t" + "popq %r12 \n\t" + "popfq \n\t" + "movl %eax, (%r9) \n\t" + "movl %ebx, 4(%r9) \n\t" + "movl %ecx, 8(%r9) \n\t" + "movl %edx, 12(%r9) \n\t" + "movl %esi, 16(%r9) \n\t" + "movl %edi, 20(%r9) \n\t" + "movq %r12, %rax \n\t" + "movl %eax, 28(%r9) \n\t" + "popq %r9 \n\t" + "popq %r12 \n\t" + "popq %rdx \n\t" + "popq %rbx \n\t" + "popq %rax \n\t" + "leave \n\t" + "ret \n\t" + ".previous"); /* * dmi_find_cru @@ -418,20 +423,23 @@ static int hpwdt_pretimeout(struct notifier_block *nb, unsigned long ulReason, static unsigned long rom_pl; static int die_nmi_called; - if (ulReason == DIE_NMI || ulReason == DIE_NMI_IPI) { - spin_lock_irqsave(&rom_lock, rom_pl); - if (!die_nmi_called) - asminline_call(&cmn_regs, cru_rom_addr); - die_nmi_called = 1; - spin_unlock_irqrestore(&rom_lock, rom_pl); - if (cmn_regs.u1.ral != 0) { - panic("An NMI occurred, please see the Integrated " - "Management Log for details.\n"); - } + if (ulReason != DIE_NMI && ulReason != DIE_NMI_IPI) + return NOTIFY_OK; + + spin_lock_irqsave(&rom_lock, rom_pl); + if (!die_nmi_called) + asminline_call(&cmn_regs, cru_rom_addr); + die_nmi_called = 1; + spin_unlock_irqrestore(&rom_lock, rom_pl); + if (cmn_regs.u1.ral == 0) { + printk(KERN_WARNING "hpwdt: An NMI occurred, " + "but unable to determine source.\n"); + } else { + panic("An NMI occurred, please see the Integrated " + "Management Log for details.\n"); } - die_nmi_called = 0; - return NOTIFY_DONE; + return NOTIFY_STOP; } /* |