diff options
Diffstat (limited to 'drivers')
40 files changed, 107 insertions, 32 deletions
diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig index e9f203eadb1..fdfd61a2d52 100644 --- a/drivers/bluetooth/Kconfig +++ b/drivers/bluetooth/Kconfig @@ -26,6 +26,7 @@ config BT_HCIBTSDIO config BT_HCIUART tristate "HCI UART driver" + depends on TTY help Bluetooth HCI UART driver. This driver is required if you want to use Bluetooth devices with diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index 72bedad6bf8..3bb6fa3930b 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -53,7 +53,7 @@ source "drivers/tty/serial/Kconfig" config TTY_PRINTK bool "TTY driver to output user messages via printk" - depends on EXPERT + depends on EXPERT && TTY default n ---help--- If you say Y here, the support for writing user messages (i.e. @@ -159,7 +159,7 @@ source "drivers/tty/hvc/Kconfig" config VIRTIO_CONSOLE tristate "Virtio console" - depends on VIRTIO + depends on VIRTIO && TTY select HVC_DRIVER help Virtio console for use with lguest and other hypervisors. @@ -392,6 +392,7 @@ config XILINX_HWICAP config R3964 tristate "Siemens R3964 line discipline" + depends on TTY ---help--- This driver allows synchronous communication with devices using the Siemens R3964 packet protocol. Unless you are dealing with special @@ -439,7 +440,7 @@ source "drivers/char/pcmcia/Kconfig" config MWAVE tristate "ACP Modem (Mwave) support" - depends on X86 + depends on X86 && TTY select SERIAL_8250 ---help--- The ACP modem (Mwave) for Linux is a WinModem. It is composed of a diff --git a/drivers/char/pcmcia/Kconfig b/drivers/char/pcmcia/Kconfig index 6614416a862..2a166d56738 100644 --- a/drivers/char/pcmcia/Kconfig +++ b/drivers/char/pcmcia/Kconfig @@ -7,7 +7,7 @@ menu "PCMCIA character devices" config SYNCLINK_CS tristate "SyncLink PC Card support" - depends on PCMCIA + depends on PCMCIA && TTY help Enable support for the SyncLink PC Card serial adapter, running asynchronous and HDLC communications up to 512Kbps. The port is @@ -45,7 +45,7 @@ config CARDMAN_4040 config IPWIRELESS tristate "IPWireless 3G UMTS PCMCIA card support" - depends on PCMCIA && NETDEVICES + depends on PCMCIA && NETDEVICES && TTY select PPP help This is a driver for 3G UMTS PCMCIA card from IPWireless company. In diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index bdca5111eb9..cf474b2df4a 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -803,7 +803,7 @@ config I2C_PARPORT_LIGHT config I2C_TAOS_EVM tristate "TAOS evaluation module" - depends on EXPERIMENTAL + depends on EXPERIMENTAL && TTY select SERIO select SERIO_SERPORT default n diff --git a/drivers/input/joystick/Kconfig b/drivers/input/joystick/Kconfig index 56eb471b557..055bcaba774 100644 --- a/drivers/input/joystick/Kconfig +++ b/drivers/input/joystick/Kconfig @@ -132,6 +132,8 @@ config JOYSTICK_TMDC source "drivers/input/joystick/iforce/Kconfig" +if TTY + config JOYSTICK_WARRIOR tristate "Logitech WingMan Warrior joystick" select SERIO @@ -205,6 +207,8 @@ config JOYSTICK_ZHENHUA To compile this driver as a module, choose M here: the module will be called zhenhua. +endif # TTY + config JOYSTICK_DB9 tristate "Multisystem, Sega Genesis, Saturn joysticks and gamepads" depends on PARPORT diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index 5a240c60342..008f96aaf19 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -69,6 +69,7 @@ config KEYBOARD_ATARI config KEYBOARD_ATKBD tristate "AT keyboard" if EXPERT || !X86 default y + depends on TTY select SERIO select SERIO_LIBPS2 select SERIO_I8042 if X86 @@ -153,6 +154,7 @@ config KEYBOARD_BFIN config KEYBOARD_LKKBD tristate "DECstation/VAXstation LK201/LK401 keyboard" + depends on TTY select SERIO help Say Y here if you want to use a LK201 or LK401 style serial @@ -268,7 +270,7 @@ config KEYBOARD_HIL_OLD config KEYBOARD_HIL tristate "HP HIL keyboard/pointer support" - depends on GSC || HP300 + depends on (GSC || HP300) && TTY default y select HP_SDC select HIL_MLC @@ -400,6 +402,7 @@ config KEYBOARD_IMX config KEYBOARD_NEWTON tristate "Newton keyboard" + depends on TTY select SERIO help Say Y here if you have a Newton keyboard on a serial port. @@ -479,6 +482,8 @@ config KEYBOARD_SAMSUNG To compile this driver as a module, choose M here: the module will be called samsung-keypad. +if TTY + config KEYBOARD_STOWAWAY tristate "Stowaway keyboard" select SERIO @@ -501,6 +506,8 @@ config KEYBOARD_SUNKBD To compile this driver as a module, choose M here: the module will be called sunkbd. +endif # TTY + config KEYBOARD_SH_KEYSC tristate "SuperH KEYSC keypad support" depends on SUPERH || ARCH_SHMOBILE @@ -597,6 +604,7 @@ config KEYBOARD_TWL4030 config KEYBOARD_XTKBD tristate "XT keyboard" + depends on TTY select SERIO help Say Y here if you want to use the old IBM PC/XT keyboard (or diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig index cd6268cf7cd..fc160f72dc4 100644 --- a/drivers/input/mouse/Kconfig +++ b/drivers/input/mouse/Kconfig @@ -14,6 +14,7 @@ if INPUT_MOUSE config MOUSE_PS2 tristate "PS/2 mouse" + depends on TTY default y select SERIO select SERIO_LIBPS2 @@ -138,6 +139,7 @@ config MOUSE_PS2_OLPC config MOUSE_SERIAL tristate "Serial mouse" + depends on TTY select SERIO help Say Y here if you have a serial (RS-232, COM port) mouse connected @@ -262,6 +264,7 @@ config MOUSE_RISCPC config MOUSE_VSXXXAA tristate "DEC VSXXX-AA/GA mouse and VSXXX-AB tablet" + depends on TTY select SERIO help Say Y (or M) if you want to use a DEC VSXXX-AA (hockey diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig index 4a4e182c33e..81ee7551148 100644 --- a/drivers/input/serio/Kconfig +++ b/drivers/input/serio/Kconfig @@ -4,6 +4,7 @@ config SERIO tristate "Serial I/O support" if EXPERT || !X86 default y + depends on TTY help Say Yes here if you have any input device that uses serial I/O to communicate with the system. This includes the diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 515cfe79054..3d6f548dd3d 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -192,6 +192,8 @@ config TOUCHSCREEN_DA9052 To compile this driver as a module, choose M here: the module will be called da9052_tsi. +if TTY + config TOUCHSCREEN_DYNAPRO tristate "Dynapro serial touchscreen" select SERIO @@ -216,6 +218,8 @@ config TOUCHSCREEN_HAMPSHIRE To compile this driver as a module, choose M here: the module will be called hampshire. +endif # TTY + config TOUCHSCREEN_EETI tristate "EETI touchscreen panel support" depends on I2C @@ -237,6 +241,7 @@ config TOUCHSCREEN_EGALAX config TOUCHSCREEN_FUJITSU tristate "Fujitsu serial touchscreen" + depends on TTY select SERIO help Say Y here if you have the Fujitsu touchscreen (such as one @@ -275,6 +280,8 @@ config TOUCHSCREEN_S3C2410 To compile this driver as a module, choose M here: the module will be called s3c2410_ts. +if TTY + config TOUCHSCREEN_GUNZE tristate "Gunze AHL-51S touchscreen" select SERIO @@ -311,6 +318,8 @@ config TOUCHSCREEN_WACOM_W8001 To compile this driver as a module, choose M here: the module will be called wacom_w8001. +endif # TTY + config TOUCHSCREEN_WACOM_I2C tristate "Wacom Tablet support (I2C)" depends on I2C @@ -369,6 +378,8 @@ config TOUCHSCREEN_MMS114 To compile this driver as a module, choose M here: the module will be called mms114. +if TTY + config TOUCHSCREEN_MTOUCH tristate "MicroTouch serial touchscreens" select SERIO @@ -393,6 +404,8 @@ config TOUCHSCREEN_INEXIO To compile this driver as a module, choose M here: the module will be called inexio. +endif # TTY + config TOUCHSCREEN_INTEL_MID tristate "Intel MID platform resistive touchscreen" depends on INTEL_SCU_IPC @@ -450,6 +463,7 @@ config TOUCHSCREEN_HTCPEN config TOUCHSCREEN_PENMOUNT tristate "Penmount serial touchscreen" + depends on TTY select SERIO help Say Y here if you have a Penmount serial touchscreen connected to @@ -493,6 +507,8 @@ config TOUCHSCREEN_TNETV107X To compile this driver as a module, choose M here: the module will be called tnetv107x-ts. +if TTY + config TOUCHSCREEN_TOUCHRIGHT tristate "Touchright serial touchscreen" select SERIO @@ -517,6 +533,8 @@ config TOUCHSCREEN_TOUCHWIN To compile this driver as a module, choose M here: the module will be called touchwin. +endif # TTY + config TOUCHSCREEN_TI_AM335X_TSC tristate "TI Touchscreen Interface" depends on MFD_TI_AM335X_TSCADC @@ -790,6 +808,8 @@ config TOUCHSCREEN_USB_EASYTOUCH Say Y here if you have an EasyTouch USB Touch controller. If unsure, say N. +if TTY + config TOUCHSCREEN_TOUCHIT213 tristate "Sahara TouchIT-213 touchscreen" select SERIO @@ -813,6 +833,8 @@ config TOUCHSCREEN_TSC_SERIO To compile this driver as a module, choose M here: the module will be called tsc40. +endif # TTY + config TOUCHSCREEN_TSC2005 tristate "TSC2005 based touchscreens" depends on SPI_MASTER && GENERIC_HARDIRQS diff --git a/drivers/ipack/devices/Kconfig b/drivers/ipack/devices/Kconfig index 0b82fdc198c..907a8cb48f2 100644 --- a/drivers/ipack/devices/Kconfig +++ b/drivers/ipack/devices/Kconfig @@ -1,6 +1,6 @@ config SERIAL_IPOCTAL tristate "IndustryPack IP-OCTAL uart support" - depends on IPACK_BUS + depends on IPACK_BUS && TTY help This driver supports the IPOCTAL serial port device for the IndustryPack bus. default n diff --git a/drivers/isdn/Kconfig b/drivers/isdn/Kconfig index 86cd75a0e84..ef661acdda1 100644 --- a/drivers/isdn/Kconfig +++ b/drivers/isdn/Kconfig @@ -22,6 +22,7 @@ if ISDN menuconfig ISDN_I4L tristate "Old ISDN4Linux (deprecated)" + depends on TTY ---help--- This driver allows you to use an ISDN adapter for networking connections and as dialin/out device. The isdn-tty's have a built diff --git a/drivers/isdn/capi/Kconfig b/drivers/isdn/capi/Kconfig index 15c3ffd9d86..f0468658004 100644 --- a/drivers/isdn/capi/Kconfig +++ b/drivers/isdn/capi/Kconfig @@ -18,6 +18,7 @@ config CAPI_TRACE config ISDN_CAPI_MIDDLEWARE bool "CAPI2.0 Middleware support" + depends on TTY help This option will enhance the capabilities of the /dev/capi20 interface. It will provide a means of moving a data connection, diff --git a/drivers/isdn/gigaset/Kconfig b/drivers/isdn/gigaset/Kconfig index b18a92c3218..dde5e09e626 100644 --- a/drivers/isdn/gigaset/Kconfig +++ b/drivers/isdn/gigaset/Kconfig @@ -1,5 +1,6 @@ menuconfig ISDN_DRV_GIGASET tristate "Siemens Gigaset support" + depends on TTY select CRC_CCITT select BITREVERSE help diff --git a/drivers/isdn/hardware/mISDN/Kconfig b/drivers/isdn/hardware/mISDN/Kconfig index eadc1cd34a2..b8611e3e5e7 100644 --- a/drivers/isdn/hardware/mISDN/Kconfig +++ b/drivers/isdn/hardware/mISDN/Kconfig @@ -76,6 +76,7 @@ config MISDN_NETJET tristate "Support for NETJet cards" depends on MISDN depends on PCI + depends on TTY select MISDN_IPAC select ISDN_HDLC select ISDN_I4L diff --git a/drivers/lguest/Kconfig b/drivers/lguest/Kconfig index 34ae49dc557..f9c43145a61 100644 --- a/drivers/lguest/Kconfig +++ b/drivers/lguest/Kconfig @@ -1,6 +1,6 @@ config LGUEST tristate "Linux hypervisor example code" - depends on X86_32 && EXPERIMENTAL && EVENTFD + depends on X86_32 && EXPERIMENTAL && EVENTFD && TTY select HVC_DRIVER ---help--- This is a very simple module which allows you to run diff --git a/drivers/media/radio/wl128x/Kconfig b/drivers/media/radio/wl128x/Kconfig index ea1e6545df3..f359be7e9dd 100644 --- a/drivers/media/radio/wl128x/Kconfig +++ b/drivers/media/radio/wl128x/Kconfig @@ -4,7 +4,7 @@ menu "Texas Instruments WL128x FM driver (ST based)" config RADIO_WL128X tristate "Texas Instruments WL128x FM Radio" - depends on VIDEO_V4L2 && RFKILL && GPIOLIB + depends on VIDEO_V4L2 && RFKILL && GPIOLIB && TTY select TI_ST if NET help Choose Y here if you have this FM radio chip. diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index b151b7c1bd5..4b2bb939dde 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -127,7 +127,7 @@ config PHANTOM config INTEL_MID_PTI tristate "Parallel Trace Interface for MIPI P1149.7 cJTAG standard" - depends on PCI + depends on PCI && TTY default n help The PTI (Parallel Trace Interface) driver directs diff --git a/drivers/misc/ti-st/Kconfig b/drivers/misc/ti-st/Kconfig index abb5de1afce..f34dcc51473 100644 --- a/drivers/misc/ti-st/Kconfig +++ b/drivers/misc/ti-st/Kconfig @@ -5,7 +5,7 @@ menu "Texas Instruments shared transport line discipline" config TI_ST tristate "Shared transport core driver" - depends on NET && GPIOLIB + depends on NET && GPIOLIB && TTY select FW_LOADER help This enables the shared transport core driver for TI diff --git a/drivers/mmc/card/Kconfig b/drivers/mmc/card/Kconfig index 3b1f783bf92..5562308699b 100644 --- a/drivers/mmc/card/Kconfig +++ b/drivers/mmc/card/Kconfig @@ -52,6 +52,7 @@ config MMC_BLOCK_BOUNCE config SDIO_UART tristate "SDIO UART/GPS class support" + depends on TTY help SDIO function driver for SDIO cards that implements the UART class, as well as the GPS class which appears like a UART. diff --git a/drivers/net/caif/Kconfig b/drivers/net/caif/Kconfig index abf4d7a9dcc..60c2142373c 100644 --- a/drivers/net/caif/Kconfig +++ b/drivers/net/caif/Kconfig @@ -6,7 +6,7 @@ comment "CAIF transport drivers" config CAIF_TTY tristate "CAIF TTY transport driver" - depends on CAIF + depends on CAIF && TTY default n ---help--- The CAIF TTY transport driver is a Line Discipline (ldisc) diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig index b56bd9e8095..72df3a306a0 100644 --- a/drivers/net/can/Kconfig +++ b/drivers/net/can/Kconfig @@ -13,7 +13,7 @@ config CAN_VCAN config CAN_SLCAN tristate "Serial / USB serial CAN Adaptors (slcan)" - depends on CAN + depends on CAN && TTY ---help--- CAN driver for several 'low cost' CAN interfaces that are attached via serial lines or via USB-to-serial adapters using the LAWICEL diff --git a/drivers/net/hamradio/Kconfig b/drivers/net/hamradio/Kconfig index 95dbcfdf131..bf5e5968768 100644 --- a/drivers/net/hamradio/Kconfig +++ b/drivers/net/hamradio/Kconfig @@ -1,6 +1,6 @@ config MKISS tristate "Serial port KISS driver" - depends on AX25 + depends on AX25 && TTY select CRC16 ---help--- KISS is a protocol used for the exchange of data between a computer @@ -18,7 +18,7 @@ config MKISS config 6PACK tristate "Serial port 6PACK driver" - depends on AX25 + depends on AX25 && TTY ---help--- 6pack is a transmission protocol for the data exchange between your PC and your TNC (the Terminal Node Controller acts as a kind of diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig index 595205406d7..e1454cdec14 100644 --- a/drivers/net/irda/Kconfig +++ b/drivers/net/irda/Kconfig @@ -5,7 +5,7 @@ comment "SIR device drivers" config IRTTY_SIR tristate "IrTTY (uses Linux serial driver)" - depends on IRDA + depends on IRDA && TTY help Say Y here if you want to build support for the IrTTY line discipline. To compile it as a module, choose M here: the module diff --git a/drivers/net/ppp/Kconfig b/drivers/net/ppp/Kconfig index 872df3ef07a..3d9ef4f1e60 100644 --- a/drivers/net/ppp/Kconfig +++ b/drivers/net/ppp/Kconfig @@ -147,6 +147,7 @@ config PPPOL2TP Support for PPP-over-L2TP socket family. L2TP is a protocol used by ISPs and enterprises to tunnel PPP traffic over UDP tunnels. L2TP is replacing PPTP for VPN uses. +if TTY config PPP_ASYNC tristate "PPP support for async serial ports" @@ -172,4 +173,6 @@ config PPP_SYNC_TTY To compile this driver as a module, choose M here. +endif # TTY + endif # PPP diff --git a/drivers/net/slip/Kconfig b/drivers/net/slip/Kconfig index 211b160e4e9..48e68714eef 100644 --- a/drivers/net/slip/Kconfig +++ b/drivers/net/slip/Kconfig @@ -4,6 +4,7 @@ config SLIP tristate "SLIP (serial line) support" + depends on TTY ---help--- Say Y if you intend to use SLIP or CSLIP (compressed SLIP) to connect to your Internet service provider or to connect to some diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig index ef976215b64..bd33153261c 100644 --- a/drivers/net/usb/Kconfig +++ b/drivers/net/usb/Kconfig @@ -445,7 +445,7 @@ config USB_NET_QMI_WWAN config USB_HSO tristate "Option USB High Speed Mobile Devices" - depends on USB && RFKILL + depends on USB && RFKILL && TTY default n help Choose this option if you have an Option HSDPA/HSUPA card. @@ -493,7 +493,7 @@ config USB_SIERRA_NET config USB_VL600 tristate "LG VL600 modem dongle" - depends on USB_NET_CDCETHER + depends on USB_NET_CDCETHER && TTY select USB_ACM help Select this if you want to use an LG Electronics 4G/LTE usb modem diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig index d58431e99f7..61eb8994b34 100644 --- a/drivers/net/wan/Kconfig +++ b/drivers/net/wan/Kconfig @@ -429,7 +429,7 @@ config LAPBETHER config X25_ASY tristate "X.25 async driver (EXPERIMENTAL)" - depends on LAPB && X25 + depends on LAPB && X25 && TTY ---help--- Send and receive X.25 frames over regular asynchronous serial lines such as telephone lines equipped with ordinary modems. diff --git a/drivers/pps/clients/Kconfig b/drivers/pps/clients/Kconfig index 445197d4a8c..6efd9b60d8f 100644 --- a/drivers/pps/clients/Kconfig +++ b/drivers/pps/clients/Kconfig @@ -17,7 +17,7 @@ config PPS_CLIENT_KTIMER config PPS_CLIENT_LDISC tristate "PPS line discipline" - depends on PPS + depends on PPS && TTY help If you say yes here you get support for a PPS source connected with the CD (Carrier Detect) pin of your serial port. diff --git a/drivers/s390/char/Kconfig b/drivers/s390/char/Kconfig index 2c9a776bd63..71bf959732f 100644 --- a/drivers/s390/char/Kconfig +++ b/drivers/s390/char/Kconfig @@ -11,7 +11,7 @@ config TN3270 config TN3270_TTY def_tristate y prompt "Support for tty input/output on 3270 terminals" - depends on TN3270 + depends on TN3270 && TTY help Include support for using an IBM 3270 terminal as a Linux tty. @@ -33,7 +33,7 @@ config TN3270_CONSOLE config TN3215 def_bool y prompt "Support for 3215 line mode terminal" - depends on CCW + depends on CCW && TTY help Include support for IBM 3215 line-mode terminals. @@ -51,7 +51,7 @@ config CCW_CONSOLE config SCLP_TTY def_bool y prompt "Support for SCLP line mode terminal" - depends on S390 + depends on S390 && TTY help Include support for IBM SCLP line-mode terminals. @@ -66,7 +66,7 @@ config SCLP_CONSOLE config SCLP_VT220_TTY def_bool y prompt "Support for SCLP VT220-compatible terminal" - depends on S390 + depends on S390 && TTY help Include support for an IBM SCLP VT220-compatible terminal. diff --git a/drivers/staging/ccg/Kconfig b/drivers/staging/ccg/Kconfig index 8997a8c757a..7ed5bc6caad 100644 --- a/drivers/staging/ccg/Kconfig +++ b/drivers/staging/ccg/Kconfig @@ -2,7 +2,7 @@ if USB_GADGET config USB_G_CCG tristate "Configurable Composite Gadget (STAGING)" - depends on STAGING && BLOCK && NET && !USB_ZERO && !USB_ZERO_HNPTEST && !USB_AUDIO && !GADGET_UAC1 && !USB_ETH && !USB_ETH_RNDIS && !USB_ETH_EEM && !USB_G_NCM && !USB_GADGETFS && !USB_FUNCTIONFS && !USB_FUNCTIONFS_ETH && !USB_FUNCTIONFS_RNDIS && !USB_FUNCTIONFS_GENERIC && !USB_FILE_STORAGE && !USB_FILE_STORAGE_TEST && !USB_MASS_STORAGE && !USB_G_SERIAL && !USB_MIDI_GADGET && !USB_G_PRINTER && !USB_CDC_COMPOSITE && !USB_G_NOKIA && !USB_G_ACM_MS && !USB_G_MULTI && !USB_G_MULTI_RNDIS && !USB_G_MULTI_CDC && !USB_G_HID && !USB_G_DBGP && !USB_G_WEBCAM + depends on STAGING && BLOCK && NET && !USB_ZERO && !USB_ZERO_HNPTEST && !USB_AUDIO && !GADGET_UAC1 && !USB_ETH && !USB_ETH_RNDIS && !USB_ETH_EEM && !USB_G_NCM && !USB_GADGETFS && !USB_FUNCTIONFS && !USB_FUNCTIONFS_ETH && !USB_FUNCTIONFS_RNDIS && !USB_FUNCTIONFS_GENERIC && !USB_FILE_STORAGE && !USB_FILE_STORAGE_TEST && !USB_MASS_STORAGE && !USB_G_SERIAL && !USB_MIDI_GADGET && !USB_G_PRINTER && !USB_CDC_COMPOSITE && !USB_G_NOKIA && !USB_G_ACM_MS && !USB_G_MULTI && !USB_G_MULTI_RNDIS && !USB_G_MULTI_CDC && !USB_G_HID && !USB_G_DBGP && !USB_G_WEBCAM && TTY help The Configurable Composite Gadget supports multiple USB functions: acm, mass storage, rndis and FunctionFS. diff --git a/drivers/staging/dgrp/Kconfig b/drivers/staging/dgrp/Kconfig index 39f4bb65ec8..e4c41552923 100644 --- a/drivers/staging/dgrp/Kconfig +++ b/drivers/staging/dgrp/Kconfig @@ -1,7 +1,7 @@ config DGRP tristate "Digi Realport driver" default n - depends on SYSFS + depends on SYSFS && TTY ---help--- Support for Digi Realport devices. These devices allow you to access remote serial ports as if they are local tty devices. This diff --git a/drivers/staging/fwserial/Kconfig b/drivers/staging/fwserial/Kconfig index 580406cb180..9cdb3cdc4b6 100644 --- a/drivers/staging/fwserial/Kconfig +++ b/drivers/staging/fwserial/Kconfig @@ -1,6 +1,6 @@ config FIREWIRE_SERIAL tristate "TTY over Firewire" - depends on FIREWIRE + depends on FIREWIRE && TTY help This enables TTY over IEEE 1394, providing high-speed serial connectivity to cabled peers. diff --git a/drivers/staging/sb105x/Kconfig b/drivers/staging/sb105x/Kconfig index 3d0d0eb95b8..6a2e1b78e84 100644 --- a/drivers/staging/sb105x/Kconfig +++ b/drivers/staging/sb105x/Kconfig @@ -1,7 +1,7 @@ config SB105X tristate "SystemBase PCI Multiport UART" select SERIAL_CORE - depends on PCI && BROKEN + depends on PCI && TTY && BROKEN help A driver for the SystemBase Multi-2/PCI serial card diff --git a/drivers/tty/Kconfig b/drivers/tty/Kconfig index 0ecf22b6a38..a79fd8ebd56 100644 --- a/drivers/tty/Kconfig +++ b/drivers/tty/Kconfig @@ -1,3 +1,14 @@ +config TTY + bool "Enable TTY" if EXPERT + default y + ---help--- + Allows you to remove TTY support which can save space, and + blocks features that require TTY from inclusion in the kernel. + TTY is required for any text terminals or serial port + communication. Most users should leave this enabled. + +if TTY + config VT bool "Virtual terminal" if EXPERT depends on !S390 && !UML @@ -388,3 +399,5 @@ config PPC_EARLY_DEBUG_EHV_BC_HANDLE If the number you specify is not a valid byte channel handle, then there simply will be no early console output. This is true also if you don't boot under a hypervisor at all. + +endif # TTY diff --git a/drivers/tty/Makefile b/drivers/tty/Makefile index 2953059530e..df5663d0d55 100644 --- a/drivers/tty/Makefile +++ b/drivers/tty/Makefile @@ -1,4 +1,4 @@ -obj-y += tty_io.o n_tty.o tty_ioctl.o tty_ldisc.o \ +obj-$(CONFIG_TTY) += tty_io.o n_tty.o tty_ioctl.o tty_ldisc.o \ tty_buffer.o tty_port.o tty_mutex.o obj-$(CONFIG_LEGACY_PTYS) += pty.o obj-$(CONFIG_UNIX98_PTYS) += pty.o diff --git a/drivers/tty/hvc/Kconfig b/drivers/tty/hvc/Kconfig index f47b734c6a7..8902f9b4df7 100644 --- a/drivers/tty/hvc/Kconfig +++ b/drivers/tty/hvc/Kconfig @@ -1,3 +1,5 @@ +if TTY + config HVC_DRIVER bool help @@ -119,3 +121,4 @@ config HVCS which will also be compiled when this driver is built as a module. +endif # TTY diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 2dc429357fe..e9aeccdfbe3 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -2,6 +2,8 @@ # Serial device configuration # +if TTY + menu "Serial drivers" depends on HAS_IOMEM @@ -1483,3 +1485,5 @@ config SERIAL_RP2_NR_UARTS need to be increased. endmenu + +endif # TTY diff --git a/drivers/usb/class/Kconfig b/drivers/usb/class/Kconfig index 2519e320098..316aac8e4ca 100644 --- a/drivers/usb/class/Kconfig +++ b/drivers/usb/class/Kconfig @@ -6,7 +6,7 @@ comment "USB Device Class drivers" config USB_ACM tristate "USB Modem (CDC ACM) support" - depends on USB + depends on USB && TTY ---help--- This driver supports USB modems and ISDN adapters which support the Communication Device Class Abstract Control Model interface. diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 14625fd2cec..a1bd951f9cb 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -750,6 +750,7 @@ config USB_GADGET_TARGET config USB_G_SERIAL tristate "Serial Gadget (with CDC ACM and CDC OBEX support)" + depends on TTY select USB_LIBCOMPOSITE help The Serial Gadget talks to the Linux-USB generic serial driver. @@ -799,6 +800,8 @@ config USB_G_PRINTER For more information, see Documentation/usb/gadget_printer.txt which includes sample code for accessing the device file. +if TTY + config USB_CDC_COMPOSITE tristate "CDC Composite Device (Ethernet and ACM)" depends on NET @@ -879,6 +882,8 @@ config USB_G_MULTI_CDC If unsure, say "y". +endif # TTY + config USB_G_HID tristate "HID Gadget" select USB_LIBCOMPOSITE @@ -895,6 +900,7 @@ config USB_G_HID # Standalone / single function gadgets config USB_G_DBGP tristate "EHCI Debug Device Gadget" + depends on TTY select USB_LIBCOMPOSITE help This gadget emulates an EHCI Debug device. This is useful when you want diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig index 76f46224173..d8e35fe30b0 100644 --- a/drivers/usb/serial/Kconfig +++ b/drivers/usb/serial/Kconfig @@ -4,7 +4,7 @@ menuconfig USB_SERIAL tristate "USB Serial Converter support" - depends on USB + depends on USB && TTY ---help--- Say Y here if you have a USB device that provides normal serial ports, or acts like a serial device, and you want to connect it to |