diff options
Diffstat (limited to 'drivers')
442 files changed, 11830 insertions, 15230 deletions
diff --git a/drivers/Kconfig b/drivers/Kconfig index d236aef7e59..e245779443d 100644 --- a/drivers/Kconfig +++ b/drivers/Kconfig @@ -140,4 +140,8 @@ source "drivers/virt/Kconfig" source "drivers/devfreq/Kconfig" +source "drivers/iio/Kconfig" + +source "drivers/vme/Kconfig" + endmenu diff --git a/drivers/Makefile b/drivers/Makefile index 95952c82bf1..08b78e03546 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -134,3 +134,5 @@ obj-$(CONFIG_VIRT_DRIVERS) += virt/ obj-$(CONFIG_HYPERV) += hv/ obj-$(CONFIG_PM_DEVFREQ) += devfreq/ +obj-$(CONFIG_IIO) += iio/ +obj-$(CONFIG_VME_BUS) += vme/ diff --git a/drivers/iio/Kconfig b/drivers/iio/Kconfig new file mode 100644 index 00000000000..3ab7d48d0b0 --- /dev/null +++ b/drivers/iio/Kconfig @@ -0,0 +1,51 @@ +# +# Industrial I/O subsytem configuration +# + +menuconfig IIO + tristate "Industrial I/O support" + depends on GENERIC_HARDIRQS + help + The industrial I/O subsystem provides a unified framework for + drivers for many different types of embedded sensors using a + number of different physical interfaces (i2c, spi, etc). See + Documentation/iio for more information. + +if IIO + +config IIO_BUFFER + bool "Enable buffer support within IIO" + help + Provide core support for various buffer based data + acquisition methods. + +if IIO_BUFFER + +config IIO_KFIFO_BUF + select IIO_TRIGGER + tristate "Industrial I/O buffering based on kfifo" + help + A simple fifo based on kfifo. Use this if you want a fifo + rather than a ring buffer. Note that this currently provides + no buffer events so it is up to userspace to work out how + often to read from the buffer. + +endif # IIO_BUFFER + +config IIO_TRIGGER + boolean "Enable triggered sampling support" + help + Provides IIO core support for triggers. Currently these + are used to initialize capture of samples to push into + ring buffers. The triggers are effectively a 'capture + data now' interrupt. + +config IIO_CONSUMERS_PER_TRIGGER + int "Maximum number of consumers per trigger" + depends on IIO_TRIGGER + default "2" + help + This value controls the maximum number of consumers that a + given trigger may handle. Default is 2. + +endif # IIO diff --git a/drivers/iio/Makefile b/drivers/iio/Makefile new file mode 100644 index 00000000000..d5fc57d12ea --- /dev/null +++ b/drivers/iio/Makefile @@ -0,0 +1,10 @@ +# +# Makefile for the industrial I/O core. +# + +obj-$(CONFIG_IIO) += industrialio.o +industrialio-y := industrialio-core.o industrialio-event.o inkern.o +industrialio-$(CONFIG_IIO_BUFFER) += industrialio-buffer.o +industrialio-$(CONFIG_IIO_TRIGGER) += industrialio-trigger.o + +obj-$(CONFIG_IIO_KFIFO_BUF) += kfifo_buf.o diff --git a/drivers/staging/iio/iio_core.h b/drivers/iio/iio_core.h index c9dfcba0bac..f652e6ae5a3 100644 --- a/drivers/staging/iio/iio_core.h +++ b/drivers/iio/iio_core.h @@ -12,6 +12,12 @@ #ifndef _IIO_CORE_H_ #define _IIO_CORE_H_ +#include <linux/kernel.h> +#include <linux/device.h> + +struct iio_chan_spec; +struct iio_dev; + int __iio_add_chan_devattr(const char *postfix, struct iio_chan_spec const *chan, diff --git a/drivers/staging/iio/iio_core_trigger.h b/drivers/iio/iio_core_trigger.h index 6f7c56fcbe7..6f7c56fcbe7 100644 --- a/drivers/staging/iio/iio_core_trigger.h +++ b/drivers/iio/iio_core_trigger.h diff --git a/drivers/staging/iio/industrialio-buffer.c b/drivers/iio/industrialio-buffer.c index 386ba760f3f..b5b2c38045c 100644 --- a/drivers/staging/iio/industrialio-buffer.c +++ b/drivers/iio/industrialio-buffer.c @@ -21,10 +21,10 @@ #include <linux/slab.h> #include <linux/poll.h> -#include "iio.h" +#include <linux/iio/iio.h> #include "iio_core.h" -#include "sysfs.h" -#include "buffer.h" +#include <linux/iio/sysfs.h> +#include <linux/iio/buffer.h> static const char * const iio_endian_prefix[] = { [IIO_BE] = "be", @@ -124,13 +124,15 @@ static ssize_t iio_scan_el_store(struct device *dev, const char *buf, size_t len) { - int ret = 0; + int ret; bool state; struct iio_dev *indio_dev = dev_get_drvdata(dev); struct iio_buffer *buffer = indio_dev->buffer; struct iio_dev_attr *this_attr = to_iio_dev_attr(attr); - state = !(buf[0] == '0'); + ret = strtobool(buf, &state); + if (ret < 0) + return ret; mutex_lock(&indio_dev->mlock); if (iio_buffer_enabled(indio_dev)) { ret = -EBUSY; @@ -169,17 +171,21 @@ static ssize_t iio_scan_el_ts_store(struct device *dev, const char *buf, size_t len) { - int ret = 0; + int ret; struct iio_dev *indio_dev = dev_get_drvdata(dev); bool state; - state = !(buf[0] == '0'); + ret = strtobool(buf, &state); + if (ret < 0) + return ret; + mutex_lock(&indio_dev->mlock); if (iio_buffer_enabled(indio_dev)) { ret = -EBUSY; goto error_ret; } indio_dev->buffer->scan_timestamp = state; + indio_dev->scan_timestamp = state; error_ret: mutex_unlock(&indio_dev->mlock); @@ -291,7 +297,7 @@ int iio_buffer_register(struct iio_dev *indio_dev, goto error_cleanup_dynamic; attrcount += ret; if (channels[i].type == IIO_TIMESTAMP) - buffer->scan_index_timestamp = + indio_dev->scan_index_timestamp = channels[i].scan_index; } if (indio_dev->masklength && buffer->scan_mask == NULL) { @@ -503,30 +509,41 @@ static const unsigned long *iio_scan_mask_match(const unsigned long *av_masks, return NULL; } -int iio_sw_buffer_preenable(struct iio_dev *indio_dev) +static int iio_compute_scan_bytes(struct iio_dev *indio_dev, const long *mask, + bool timestamp) { - struct iio_buffer *buffer = indio_dev->buffer; const struct iio_chan_spec *ch; unsigned bytes = 0; int length, i; - dev_dbg(&indio_dev->dev, "%s\n", __func__); /* How much space will the demuxed element take? */ - for_each_set_bit(i, buffer->scan_mask, + for_each_set_bit(i, mask, indio_dev->masklength) { ch = iio_find_channel_from_si(indio_dev, i); - length = ch->scan_type.storagebits/8; + length = ch->scan_type.storagebits / 8; bytes = ALIGN(bytes, length); bytes += length; } - if (buffer->scan_timestamp) { + if (timestamp) { ch = iio_find_channel_from_si(indio_dev, - buffer->scan_index_timestamp); - length = ch->scan_type.storagebits/8; + indio_dev->scan_index_timestamp); + length = ch->scan_type.storagebits / 8; bytes = ALIGN(bytes, length); bytes += length; } - buffer->access->set_bytes_per_datum(buffer, bytes); + return bytes; +} + +int iio_sw_buffer_preenable(struct iio_dev *indio_dev) +{ + struct iio_buffer *buffer = indio_dev->buffer; + dev_dbg(&indio_dev->dev, "%s\n", __func__); + + /* How much space will the demuxed element take? */ + indio_dev->scan_bytes = + iio_compute_scan_bytes(indio_dev, buffer->scan_mask, + buffer->scan_timestamp); + buffer->access->set_bytes_per_datum(buffer, indio_dev->scan_bytes); /* What scan mask do we actually have ?*/ if (indio_dev->available_scan_masks) @@ -638,19 +655,25 @@ int iio_push_to_buffer(struct iio_buffer *buffer, unsigned char *data, } EXPORT_SYMBOL_GPL(iio_push_to_buffer); +static void iio_buffer_demux_free(struct iio_buffer *buffer) +{ + struct iio_demux_table *p, *q; + list_for_each_entry_safe(p, q, &buffer->demux_list, l) { + list_del(&p->l); + kfree(p); + } +} + int iio_update_demux(struct iio_dev *indio_dev) { const struct iio_chan_spec *ch; struct iio_buffer *buffer = indio_dev->buffer; int ret, in_ind = -1, out_ind, length; unsigned in_loc = 0, out_loc = 0; - struct iio_demux_table *p, *q; + struct iio_demux_table *p; /* Clear out any old demux */ - list_for_each_entry_safe(p, q, &buffer->demux_list, l) { - list_del(&p->l); - kfree(p); - } + iio_buffer_demux_free(buffer); kfree(buffer->demux_bounce); buffer->demux_bounce = NULL; @@ -704,7 +727,7 @@ int iio_update_demux(struct iio_dev *indio_dev) goto error_clear_mux_table; } ch = iio_find_channel_from_si(indio_dev, - buffer->scan_index_timestamp); + indio_dev->scan_index_timestamp); length = ch->scan_type.storagebits/8; if (out_loc % length) out_loc += length - out_loc % length; @@ -725,10 +748,8 @@ int iio_update_demux(struct iio_dev *indio_dev) return 0; error_clear_mux_table: - list_for_each_entry_safe(p, q, &buffer->demux_list, l) { - list_del(&p->l); - kfree(p); - } + iio_buffer_demux_free(buffer); + return ret; } EXPORT_SYMBOL_GPL(iio_update_demux); diff --git a/drivers/staging/iio/industrialio-core.c b/drivers/iio/industrialio-core.c index d303bfbff27..72e33b819f9 100644 --- a/drivers/staging/iio/industrialio-core.c +++ b/drivers/iio/industrialio-core.c @@ -23,11 +23,11 @@ #include <linux/slab.h> #include <linux/anon_inodes.h> #include <linux/debugfs.h> -#include "iio.h" +#include <linux/iio/iio.h> #include "iio_core.h" #include "iio_core_trigger.h" -#include "sysfs.h" -#include "events.h" +#include <linux/iio/sysfs.h> +#include <linux/iio/events.h> /* IDA to assign each registered device a unique id*/ static DEFINE_IDA(iio_ida); @@ -42,11 +42,6 @@ EXPORT_SYMBOL(iio_bus_type); static struct dentry *iio_debugfs_dentry; -static const char * const iio_data_type_name[] = { - [IIO_RAW] = "raw", - [IIO_PROCESSED] = "input", -}; - static const char * const iio_direction[] = { [0] = "in", [1] = "out", @@ -68,6 +63,7 @@ static const char * const iio_chan_type_name_spec[] = { [IIO_ANGL] = "angl", [IIO_TIMESTAMP] = "timestamp", [IIO_CAPACITANCE] = "capacitance", + [IIO_ALTVOLTAGE] = "altvoltage", }; static const char * const iio_modifier_names[] = { @@ -80,6 +76,8 @@ static const char * const iio_modifier_names[] = { /* relies on pairs of these shared then separate */ static const char * const iio_chan_info_postfix[] = { + [IIO_CHAN_INFO_RAW] = "raw", + [IIO_CHAN_INFO_PROCESSED] = "input", [IIO_CHAN_INFO_SCALE] = "scale", [IIO_CHAN_INFO_OFFSET] = "offset", [IIO_CHAN_INFO_CALIBSCALE] = "calibscale", @@ -90,6 +88,9 @@ static const char * const iio_chan_info_postfix[] = { [IIO_CHAN_INFO_AVERAGE_RAW] = "mean_raw", [IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY] = "filter_low_pass_3db_frequency", + [IIO_CHAN_INFO_SAMP_FREQ] = "sampling_frequency", + [IIO_CHAN_INFO_FREQUENCY] = "frequency", + [IIO_CHAN_INFO_PHASE] = "phase", }; const struct iio_chan_spec @@ -280,7 +281,7 @@ static ssize_t iio_read_channel_ext_info(struct device *dev, ext_info = &this_attr->c->ext_info[this_attr->address]; - return ext_info->read(indio_dev, this_attr->c, buf); + return ext_info->read(indio_dev, ext_info->private, this_attr->c, buf); } static ssize_t iio_write_channel_ext_info(struct device *dev, @@ -294,7 +295,8 @@ static ssize_t iio_write_channel_ext_info(struct device *dev, ext_info = &this_attr->c->ext_info[this_attr->address]; - return ext_info->write(indio_dev, this_attr->c, buf, len); + return ext_info->write(indio_dev, ext_info->private, + this_attr->c, buf, len); } static ssize_t iio_read_channel_info(struct device *dev, @@ -575,25 +577,12 @@ error_ret: static int iio_device_add_channel_sysfs(struct iio_dev *indio_dev, struct iio_chan_spec const *chan) { - int ret, i, attrcount = 0; + int ret, attrcount = 0; + int i; const struct iio_chan_spec_ext_info *ext_info; if (chan->channel < 0) return 0; - - ret = __iio_add_chan_devattr(iio_data_type_name[chan->processed_val], - chan, - &iio_read_channel_info, - (chan->output ? - &iio_write_channel_info : NULL), - 0, - 0, - &indio_dev->dev, - &indio_dev->channel_attr_list); - if (ret) - goto error_ret; - attrcount++; - for_each_set_bit(i, &chan->info_mask, sizeof(long)*8) { ret = __iio_add_chan_devattr(iio_chan_info_postfix[i/2], chan, @@ -752,7 +741,7 @@ static struct device_type iio_dev_type = { .release = iio_dev_release, }; -struct iio_dev *iio_allocate_device(int sizeof_priv) +struct iio_dev *iio_device_alloc(int sizeof_priv) { struct iio_dev *dev; size_t alloc_size; @@ -788,16 +777,16 @@ struct iio_dev *iio_allocate_device(int sizeof_priv) return dev; } -EXPORT_SYMBOL(iio_allocate_device); +EXPORT_SYMBOL(iio_device_alloc); -void iio_free_device(struct iio_dev *dev) +void iio_device_free(struct iio_dev *dev) { if (dev) { ida_simple_remove(&iio_ida, dev->id); kfree(dev); } } -EXPORT_SYMBOL(iio_free_device); +EXPORT_SYMBOL(iio_device_free); /** * iio_chrdev_open() - chrdev file open for buffer access and ioctls diff --git a/drivers/staging/iio/industrialio-event.c b/drivers/iio/industrialio-event.c index 5fdf739e38f..5fcf50b1ae5 100644 --- a/drivers/staging/iio/industrialio-event.c +++ b/drivers/iio/industrialio-event.c @@ -20,10 +20,10 @@ #include <linux/slab.h> #include <linux/uaccess.h> #include <linux/wait.h> -#include "iio.h" +#include <linux/iio/iio.h> #include "iio_core.h" -#include "sysfs.h" -#include "events.h" +#include <linux/iio/sysfs.h> +#include <linux/iio/events.h> /** * struct iio_event_interface - chrdev interface for an event line diff --git a/drivers/staging/iio/industrialio-trigger.c b/drivers/iio/industrialio-trigger.c index 47ecadd4818..1dbd7b86a69 100644 --- a/drivers/staging/iio/industrialio-trigger.c +++ b/drivers/iio/industrialio-trigger.c @@ -15,11 +15,11 @@ #include <linux/list.h> #include <linux/slab.h> -#include "iio.h" -#include "trigger.h" +#include <linux/iio/iio.h> +#include <linux/iio/trigger.h> #include "iio_core.h" #include "iio_core_trigger.h" -#include "trigger_consumer.h" +#include <linux/iio/trigger_consumer.h> /* RFC - Question of approach * Make the common case (single sensor single trigger) @@ -360,9 +360,9 @@ static ssize_t iio_trigger_write_current(struct device *dev, indio_dev->trig = trig; if (oldtrig && indio_dev->trig != oldtrig) - iio_put_trigger(oldtrig); + iio_trigger_put(oldtrig); if (indio_dev->trig) - iio_get_trigger(indio_dev->trig); + iio_trigger_get(indio_dev->trig); return len; } @@ -426,7 +426,7 @@ static void iio_trig_subirqunmask(struct irq_data *d) trig->subirqs[d->irq - trig->subirq_base].enabled = true; } -struct iio_trigger *iio_allocate_trigger(const char *fmt, ...) +struct iio_trigger *iio_trigger_alloc(const char *fmt, ...) { va_list vargs; struct iio_trigger *trig; @@ -472,14 +472,14 @@ struct iio_trigger *iio_allocate_trigger(const char *fmt, ...) } return trig; } -EXPORT_SYMBOL(iio_allocate_trigger); +EXPORT_SYMBOL(iio_trigger_alloc); -void iio_free_trigger(struct iio_trigger *trig) +void iio_trigger_free(struct iio_trigger *trig) { if (trig) put_device(&trig->dev); } -EXPORT_SYMBOL(iio_free_trigger); +EXPORT_SYMBOL(iio_trigger_free); void iio_device_register_trigger_consumer(struct iio_dev *indio_dev) { @@ -491,7 +491,7 @@ void iio_device_unregister_trigger_consumer(struct iio_dev *indio_dev) { /* Clean up and associated but not attached triggers references */ if (indio_dev->trig) - iio_put_trigger(indio_dev->trig); + iio_trigger_put(indio_dev->trig); } int iio_triggered_buffer_postenable(struct iio_dev *indio_dev) diff --git a/drivers/staging/iio/inkern.c b/drivers/iio/inkern.c index ef07a02bf54..922645893dc 100644 --- a/drivers/staging/iio/inkern.c +++ b/drivers/iio/inkern.c @@ -11,11 +11,11 @@ #include <linux/slab.h> #include <linux/mutex.h> -#include "iio.h" +#include <linux/iio/iio.h> #include "iio_core.h" -#include "machine.h" -#include "driver.h" -#include "consumer.h" +#include <linux/iio/machine.h> +#include <linux/iio/driver.h> +#include <linux/iio/consumer.h> struct iio_map_internal { struct iio_dev *indio_dev; diff --git a/drivers/staging/iio/kfifo_buf.c b/drivers/iio/kfifo_buf.c index 9f3bd59c0e7..6bf9d05f484 100644 --- a/drivers/staging/iio/kfifo_buf.c +++ b/drivers/iio/kfifo_buf.c @@ -5,8 +5,7 @@ #include <linux/workqueue.h> #include <linux/kfifo.h> #include <linux/mutex.h> - -#include "kfifo_buf.h" +#include <linux/iio/kfifo_buf.h> struct iio_kfifo { struct iio_buffer buffer; diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index c7795096d43..c9104282ec9 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -506,4 +506,5 @@ source "drivers/misc/ti-st/Kconfig" source "drivers/misc/lis3lv02d/Kconfig" source "drivers/misc/carma/Kconfig" source "drivers/misc/altera-stapl/Kconfig" +source "drivers/misc/mei/Kconfig" endmenu diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index 3e1d80106f0..0f6af6a1334 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -49,3 +49,4 @@ obj-y += carma/ obj-$(CONFIG_USB_SWITCH_FSA9480) += fsa9480.o obj-$(CONFIG_ALTERA_STAPL) +=altera-stapl/ obj-$(CONFIG_MAX8997_MUIC) += max8997-muic.o +obj-$(CONFIG_INTEL_MEI) += mei/ diff --git a/drivers/staging/mei/Kconfig b/drivers/misc/mei/Kconfig index 47d78a72db2..47d78a72db2 100644 --- a/drivers/staging/mei/Kconfig +++ b/drivers/misc/mei/Kconfig diff --git a/drivers/staging/mei/Makefile b/drivers/misc/mei/Makefile index 57168db6c7e..57168db6c7e 100644 --- a/drivers/staging/mei/Makefile +++ b/drivers/misc/mei/Makefile diff --git a/drivers/staging/mei/TODO b/drivers/misc/mei/TODO index fc266018355..fc266018355 100644 --- a/drivers/staging/mei/TODO +++ b/drivers/misc/mei/TODO diff --git a/drivers/staging/mei/hw.h b/drivers/misc/mei/hw.h index 24c4c962819..24c4c962819 100644 --- a/drivers/staging/mei/hw.h +++ b/drivers/misc/mei/hw.h diff --git a/drivers/staging/mei/init.c b/drivers/misc/mei/init.c index eab711fb5fc..afb0a583b56 100644 --- a/drivers/staging/mei/init.c +++ b/drivers/misc/mei/init.c @@ -200,7 +200,7 @@ int mei_hw_init(struct mei_device *dev) if (!(dev->me_hw_state & ME_RDY_HRA)) dev_dbg(&dev->pdev->dev, "ME turn off ME_RDY.\n"); - printk(KERN_ERR "mei: link layer initialization failed.\n"); + dev_err(&dev->pdev->dev, "link layer initialization failed.\n"); ret = -ENODEV; goto out; } diff --git a/drivers/staging/mei/interface.c b/drivers/misc/mei/interface.c index 9a2cfafc52a..9a2cfafc52a 100644 --- a/drivers/staging/mei/interface.c +++ b/drivers/misc/mei/interface.c diff --git a/drivers/staging/mei/interface.h b/drivers/misc/mei/interface.h index fb90c6f8a75..0d0043575a2 100644 --- a/drivers/staging/mei/interface.h +++ b/drivers/misc/mei/interface.h @@ -51,8 +51,7 @@ int mei_flow_ctrl_creds(struct mei_device *dev, struct mei_cl *cl); int mei_wd_send(struct mei_device *dev); int mei_wd_stop(struct mei_device *dev, bool preserve); -bool mei_wd_host_init(struct mei_device *dev); -void mei_wd_set_start_timeout(struct mei_device *dev, u16 timeout); +int mei_wd_host_init(struct mei_device *dev); /* * mei_watchdog_register - Registering watchdog interface * once we got connection to the WD Client diff --git a/drivers/staging/mei/interrupt.c b/drivers/misc/mei/interrupt.c index 2007d2447b1..2007d2447b1 100644 --- a/drivers/staging/mei/interrupt.c +++ b/drivers/misc/mei/interrupt.c diff --git a/drivers/staging/mei/iorw.c b/drivers/misc/mei/iorw.c index 0a80dc4e62f..0a80dc4e62f 100644 --- a/drivers/staging/mei/iorw.c +++ b/drivers/misc/mei/iorw.c diff --git a/drivers/staging/mei/main.c b/drivers/misc/mei/main.c index 7c9321fa7bb..20f80dfcf31 100644 --- a/drivers/staging/mei/main.c +++ b/drivers/misc/mei/main.c @@ -14,6 +14,8 @@ * */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/kernel.h> @@ -39,16 +41,7 @@ #include "mei.h" #include "interface.h" - -#define MEI_READ_TIMEOUT 45 -#define MEI_DRIVER_NAME "mei" -#define MEI_DEV_NAME "mei" - -/* - * mei driver strings - */ -static char mei_driver_name[] = MEI_DRIVER_NAME; -static const char mei_driver_string[] = "Intel(R) Management Engine Interface"; +static const char mei_driver_name[] = "mei"; /* The device pointer */ /* Currently this driver works as long as there is only a single AMT device. */ @@ -931,7 +924,7 @@ static const struct file_operations mei_fops = { * Misc Device Struct */ static struct miscdevice mei_misc_device = { - .name = MEI_DRIVER_NAME, + .name = "mei", .fops = &mei_fops, .minor = MISC_DYNAMIC_MINOR, }; @@ -1020,7 +1013,7 @@ static int __devinit mei_probe(struct pci_dev *pdev, mutex_unlock(&mei_mutex); - pr_debug("mei: Driver initialization successful.\n"); + pr_debug("initialization successful.\n"); return 0; @@ -1204,7 +1197,7 @@ static int __init mei_init_module(void) { int ret; - pr_debug("mei: %s\n", mei_driver_string); + pr_debug("loading.\n"); /* init pci module */ ret = pci_register_driver(&mei_driver); if (ret < 0) @@ -1226,7 +1219,7 @@ static void __exit mei_exit_module(void) misc_deregister(&mei_misc_device); pci_unregister_driver(&mei_driver); - pr_debug("mei: Driver unloaded successfully.\n"); + pr_debug("unloaded successfully.\n"); } module_exit(mei_exit_module); diff --git a/drivers/staging/mei/mei-amt-version.c b/drivers/misc/mei/mei-amt-version.c index ac2a507be25..ac2a507be25 100644 --- a/drivers/staging/mei/mei-amt-version.c +++ b/drivers/misc/mei/mei-amt-version.c diff --git a/drivers/staging/mei/mei.h b/drivers/misc/mei/mei.h index bc0d8b69c49..bc0d8b69c49 100644 --- a/drivers/staging/mei/mei.h +++ b/drivers/misc/mei/mei.h diff --git a/drivers/staging/mei/mei.txt b/drivers/misc/mei/mei.txt index 2785697da59..2785697da59 100644 --- a/drivers/staging/mei/mei.txt +++ b/drivers/misc/mei/mei.txt diff --git a/drivers/staging/mei/mei_dev.h b/drivers/misc/mei/mei_dev.h index 10b1b4e2f8a..10b1b4e2f8a 100644 --- a/drivers/staging/mei/mei_dev.h +++ b/drivers/misc/mei/mei_dev.h diff --git a/drivers/staging/mei/wd.c b/drivers/misc/mei/wd.c index cf4c29d10e7..1e6285127e9 100644 --- a/drivers/staging/mei/wd.c +++ b/drivers/misc/mei/wd.c @@ -45,23 +45,22 @@ const uuid_le mei_wd_guid = UUID_LE(0x05B79A6F, 0x4628, 0x4D7F, 0x89, 0x9D, 0xA9, 0x15, 0x14, 0xCB, 0x32, 0xAB); -void mei_wd_set_start_timeout(struct mei_device *dev, u16 timeout) +static void mei_wd_set_start_timeout(struct mei_device *dev, u16 timeout) { - dev_dbg(&dev->pdev->dev, "timeout=%d.\n", timeout); + dev_dbg(&dev->pdev->dev, "wd: set timeout=%d.\n", timeout); memcpy(dev->wd_data, mei_start_wd_params, MEI_WD_PARAMS_SIZE); - memcpy(dev->wd_data + MEI_WD_PARAMS_SIZE, - &timeout, sizeof(u16)); + memcpy(dev->wd_data + MEI_WD_PARAMS_SIZE, &timeout, sizeof(u16)); } /** * host_init_wd - mei initialization wd. * * @dev: the device structure + * returns -ENENT if wd client cannot be found + * -EIO if write has failed */ -bool mei_wd_host_init(struct mei_device *dev) +int mei_wd_host_init(struct mei_device *dev) { - bool ret = false; - mei_cl_init(&dev->wd_cl, dev); /* look for WD client and connect to it */ @@ -72,25 +71,21 @@ bool mei_wd_host_init(struct mei_device *dev) mei_find_me_client_update_filext(dev, &dev->wd_cl, &mei_wd_guid, MEI_WD_HOST_CLIENT_ID); - dev_dbg(&dev->pdev->dev, "check wd_cl\n"); - if (MEI_FILE_CONNECTING == dev->wd_cl.state) { - if (mei_connect(dev, &dev->wd_cl)) { - dev_dbg(&dev->pdev->dev, "Failed to connect to WD client\n"); - dev->wd_cl.state = MEI_FILE_DISCONNECTED; - dev->wd_cl.host_client_id = 0; - ret = false; - goto end; - } else { - dev->wd_cl.timer_count = CONNECT_TIMEOUT; - } - } else { - dev_dbg(&dev->pdev->dev, "Failed to find WD client\n"); - ret = false; - goto end; + dev_dbg(&dev->pdev->dev, "wd: check client\n"); + if (MEI_FILE_CONNECTING != dev->wd_cl.state) { + dev_info(&dev->pdev->dev, "wd: failed to find the client\n"); + return -ENOENT; } -end: - return ret; + if (mei_connect(dev, &dev->wd_cl)) { + dev_err(&dev->pdev->dev, "wd: failed to connect to the client\n"); + dev->wd_cl.state = MEI_FILE_DISCONNECTED; + dev->wd_cl.host_client_id = 0; + return -EIO; + } + dev->wd_cl.timer_count = CONNECT_TIMEOUT; + + return 0; } /** @@ -159,7 +154,7 @@ int mei_wd_stop(struct mei_device *dev, bool preserve) if (ret) goto out; } else { - dev_dbg(&dev->pdev->dev, "send stop WD failed\n"); + dev_err(&dev->pdev->dev, "wd: send stop failed\n"); } dev->wd_pending = false; @@ -173,13 +168,13 @@ int mei_wd_stop(struct mei_device *dev, bool preserve) dev->wd_stopped, 10 * HZ); mutex_lock(&dev->device_lock); if (dev->wd_stopped) { - dev_dbg(&dev->pdev->dev, "stop wd complete ret=%d.\n", ret); + dev_dbg(&dev->pdev->dev, "wd: stop completed ret=%d.\n", ret); ret = 0; } else { if (!ret) ret = -ETIMEDOUT; dev_warn(&dev->pdev->dev, - "stop wd failed to complete ret=%d.\n", ret); + "wd: stop failed to complete ret=%d.\n", ret); } if (preserve) @@ -208,13 +203,15 @@ static int mei_wd_ops_start(struct watchdog_device *wd_dev) mutex_lock(&dev->device_lock); if (dev->mei_state != MEI_ENABLED) { - dev_dbg(&dev->pdev->dev, "mei_state != MEI_ENABLED mei_state= %d\n", - dev->mei_state); + dev_dbg(&dev->pdev->dev, + "wd: mei_state != MEI_ENABLED mei_state = %d\n", + dev->mei_state); goto end_unlock; } if (dev->wd_cl.state != MEI_FILE_CONNECTED) { - dev_dbg(&dev->pdev->dev, "MEI Driver is not connected to Watchdog Client\n"); + dev_dbg(&dev->pdev->dev, + "MEI Driver is not connected to Watchdog Client\n"); goto end_unlock; } @@ -267,7 +264,7 @@ static int mei_wd_ops_ping(struct watchdog_device *wd_dev) mutex_lock(&dev->device_lock); if (dev->wd_cl.state != MEI_FILE_CONNECTED) { - dev_dbg(&dev->pdev->dev, "wd is not connected.\n"); + dev_err(&dev->pdev->dev, "wd: not connected.\n"); ret = -ENODEV; goto end; } @@ -277,16 +274,17 @@ static int mei_wd_ops_ping(struct watchdog_device *wd_dev) mei_flow_ctrl_creds(dev, &dev->wd_cl) > 0) { dev->mei_host_buffer_is_empty = false; - dev_dbg(&dev->pdev->dev, "sending watchdog ping\n"); + dev_dbg(&dev->pdev->dev, "wd: sending ping\n"); if (mei_wd_send(dev)) { - dev_dbg(&dev->pdev->dev, "wd send failed.\n"); + dev_err(&dev->pdev->dev, "wd: send failed.\n"); ret = -EIO; goto end; } if (mei_flow_ctrl_reduce(dev, &dev->wd_cl)) { - dev_dbg(&dev->pdev->dev, "mei_flow_ctrl_reduce() failed.\n"); + dev_err(&dev->pdev->dev, + "wd: mei_flow_ctrl_reduce() failed.\n"); ret = -EIO; goto end; } @@ -346,7 +344,7 @@ static const struct watchdog_info wd_info = { .options = WDIOF_KEEPALIVEPING, }; -struct watchdog_device amt_wd_dev = { +static struct watchdog_device amt_wd_dev = { .info = &wd_info, .ops = &wd_ops, .timeout = AMT_WD_DEFAULT_TIMEOUT, @@ -362,10 +360,12 @@ void mei_watchdog_register(struct mei_device *dev) dev->wd_due_counter = !!dev->wd_timeout; if (watchdog_register_device(&amt_wd_dev)) { - dev_err(&dev->pdev->dev, "unable to register watchdog device.\n"); + dev_err(&dev->pdev->dev, + "wd: unable to register watchdog device.\n"); dev->wd_interface_reg = false; } else { - dev_dbg(&dev->pdev->dev, "successfully register watchdog interface.\n"); + dev_dbg(&dev->pdev->dev, + "wd: successfully register watchdog interface.\n"); dev->wd_interface_reg = true; } } diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig index d70ede7a7f9..d58431e99f7 100644 --- a/drivers/net/wan/Kconfig +++ b/drivers/net/wan/Kconfig @@ -203,37 +203,6 @@ config WANXL_BUILD_FIRMWARE You should never need this option, say N. -config PC300 - tristate "Cyclades-PC300 support (RS-232/V.35, X.21, T1/E1 boards)" - depends on HDLC && PCI && BROKEN - ---help--- - This driver is broken because of struct tty_driver change. - - Driver for the Cyclades-PC300 synchronous communication boards. - - These boards provide synchronous serial interfaces to your - Linux box (interfaces currently available are RS-232/V.35, X.21 and - T1/E1). If you wish to support Multilink PPP, please select the - option later and read the file README.mlppp provided by PC300 - package. - - To compile this as a module, choose M here: the module - will be called pc300. - - If unsure, say N. - -config PC300_MLPPP - bool "Cyclades-PC300 MLPPP support" - depends on PC300 && PPP_MULTILINK && PPP_SYNC_TTY && HDLC_PPP - help - Multilink PPP over the PC300 synchronous communication boards. - -comment "Cyclades-PC300 MLPPP support is disabled." - depends on HDLC && PC300 && (PPP=n || !PPP_MULTILINK || PPP_SYNC_TTY=n || !HDLC_PPP) - -comment "Refer to the file README.mlppp, provided by PC300 package." - depends on HDLC && PC300 && (PPP=n || !PPP_MULTILINK || PPP_SYNC_TTY=n || !HDLC_PPP) - config PC300TOO tristate "Cyclades PC300 RSV/X21 alternative support" depends on HDLC && PCI diff --git a/drivers/net/wan/Makefile b/drivers/net/wan/Makefile index 19d14bc2835..eac709bed7a 100644 --- a/drivers/net/wan/Makefile +++ b/drivers/net/wan/Makefile @@ -17,10 +17,6 @@ obj-$(CONFIG_HDLC_FR) += hdlc_fr.o obj-$(CONFIG_HDLC_PPP) += hdlc_ppp.o obj-$(CONFIG_HDLC_X25) += hdlc_x25.o -pc300-y := pc300_drv.o -pc300-$(CONFIG_PC300_MLPPP) += pc300_tty.o -pc300-objs := $(pc300-y) - obj-$(CONFIG_HOSTESS_SV11) += z85230.o hostess_sv11.o obj-$(CONFIG_SEALEVEL_4021) += z85230.o sealevel.o obj-$(CONFIG_COSA) += cosa.o @@ -35,7 +31,6 @@ obj-$(CONFIG_SDLA) += sdla.o obj-$(CONFIG_CYCLADES_SYNC) += cycx_drv.o cyclomx.o obj-$(CONFIG_LAPBETHER) += lapbether.o obj-$(CONFIG_SBNI) += sbni.o -obj-$(CONFIG_PC300) += pc300.o obj-$(CONFIG_N2) += n2.o obj-$(CONFIG_C101) += c101.o obj-$(CONFIG_WANXL) += wanxl.o diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig index 97d412d9145..32b02e443ed 100644 --- a/drivers/staging/Kconfig +++ b/drivers/staging/Kconfig @@ -24,8 +24,6 @@ menuconfig STAGING if STAGING -source "drivers/staging/serial/Kconfig" - source "drivers/staging/et131x/Kconfig" source "drivers/staging/slicoss/Kconfig" @@ -74,8 +72,6 @@ source "drivers/staging/vt6655/Kconfig" source "drivers/staging/vt6656/Kconfig" -source "drivers/staging/vme/Kconfig" - source "drivers/staging/sep/Kconfig" source "drivers/staging/iio/Kconfig" @@ -116,12 +112,12 @@ source "drivers/staging/cptm1217/Kconfig" source "drivers/staging/ste_rmi4/Kconfig" -source "drivers/staging/mei/Kconfig" - source "drivers/staging/nvec/Kconfig" source "drivers/staging/media/Kconfig" +source "drivers/staging/net/Kconfig" + source "drivers/staging/omapdrm/Kconfig" source "drivers/staging/android/Kconfig" diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile index ffe7d44374e..e603c075696 100644 --- a/drivers/staging/Makefile +++ b/drivers/staging/Makefile @@ -3,8 +3,8 @@ # fix for build system bug... obj-$(CONFIG_STAGING) += staging.o -obj-y += serial/ obj-y += media/ +obj-y += net/ obj-$(CONFIG_ET131X) += et131x/ obj-$(CONFIG_SLICOSS) += slicoss/ obj-$(CONFIG_USBIP_CORE) += usbip/ @@ -50,7 +50,6 @@ obj-$(CONFIG_FT1000) += ft1000/ obj-$(CONFIG_SPEAKUP) += speakup/ obj-$(CONFIG_TOUCHSCREEN_CLEARPAD_TM1217) += cptm1217/ obj-$(CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4) += ste_rmi4/ -obj-$(CONFIG_INTEL_MEI) += mei/ obj-$(CONFIG_MFD_NVEC) += nvec/ obj-$(CONFIG_DRM_OMAP) += omapdrm/ obj-$(CONFIG_ANDROID) += android/ diff --git a/drivers/staging/android/Kconfig b/drivers/staging/android/Kconfig index eb1dee26bda..775229d1256 100644 --- a/drivers/staging/android/Kconfig +++ b/drivers/staging/android/Kconfig @@ -55,31 +55,14 @@ config ANDROID_LOW_MEMORY_KILLER source "drivers/staging/android/switch/Kconfig" -config ANDROID_INTF_ALARM +config ANDROID_INTF_ALARM_DEV bool "Android alarm driver" depends on RTC_CLASS default n help Provides non-wakeup and rtc backed wakeup alarms based on rtc or elapsed realtime, and a non-wakeup alarm on the monotonic clock. - Also provides an interface to set the wall time which must be used - for elapsed realtime to work. - -config ANDROID_INTF_ALARM_DEV - bool "Android alarm device" - depends on ANDROID_INTF_ALARM - default y - help - Exports the alarm interface to user-space. - -config ANDROID_ALARM_OLDDRV_COMPAT - bool "Android Alarm compatability with old drivers" - depends on ANDROID_INTF_ALARM - default n - help - Provides preprocessor alias to aid compatability with - older out-of-tree drivers that use the Android Alarm - in-kernel API. This will be removed eventually. + Also exports the alarm interface to user-space. endif # if ANDROID diff --git a/drivers/staging/android/Makefile b/drivers/staging/android/Makefile index 9b6c9ed91f6..b4be69f80d7 100644 --- a/drivers/staging/android/Makefile +++ b/drivers/staging/android/Makefile @@ -7,5 +7,4 @@ obj-$(CONFIG_ANDROID_TIMED_OUTPUT) += timed_output.o obj-$(CONFIG_ANDROID_TIMED_GPIO) += timed_gpio.o obj-$(CONFIG_ANDROID_LOW_MEMORY_KILLER) += lowmemorykiller.o obj-$(CONFIG_ANDROID_SWITCH) += switch/ -obj-$(CONFIG_ANDROID_INTF_ALARM) += alarm.o obj-$(CONFIG_ANDROID_INTF_ALARM_DEV) += alarm-dev.o diff --git a/drivers/staging/android/alarm-dev.c b/drivers/staging/android/alarm-dev.c index 03efb34cbe2..53ce6ecf390 100644 --- a/drivers/staging/android/alarm-dev.c +++ b/drivers/staging/android/alarm-dev.c @@ -22,19 +22,9 @@ #include <linux/sched.h> #include <linux/spinlock.h> #include <linux/uaccess.h> +#include <linux/alarmtimer.h> #include "android_alarm.h" -/* XXX - Hack out wakelocks, while they are out of tree */ -struct wake_lock { - int i; -}; -#define wake_lock(x) -#define wake_lock_timeout(x, y) -#define wake_unlock(x) -#define WAKE_LOCK_SUSPEND 0 -#define wake_lock_init(x, y, z) ((x)->i = 1) -#define wake_lock_destroy(x) - #define ANDROID_ALARM_PRINT_INFO (1U << 0) #define ANDROID_ALARM_PRINT_IO (1U << 1) #define ANDROID_ALARM_PRINT_INT (1U << 2) @@ -54,19 +44,65 @@ module_param_named(debug_mask, debug_mask, int, S_IRUGO | S_IWUSR | S_IWGRP); ANDROID_ALARM_RTC_WAKEUP_MASK | \ ANDROID_ALARM_ELAPSED_REALTIME_WAKEUP_MASK) -/* support old usespace code */ +/* support old userspace code */ #define ANDROID_ALARM_SET_OLD _IOW('a', 2, time_t) /* set alarm */ #define ANDROID_ALARM_SET_AND_WAIT_OLD _IOW('a', 3, time_t) static int alarm_opened; static DEFINE_SPINLOCK(alarm_slock); -static struct wake_lock alarm_wake_lock; +static struct wakeup_source alarm_wake_lock; static DECLARE_WAIT_QUEUE_HEAD(alarm_wait_queue); static uint32_t alarm_pending; static uint32_t alarm_enabled; static uint32_t wait_pending; -static struct android_alarm alarms[ANDROID_ALARM_TYPE_COUNT]; +struct devalarm { + union { + struct hrtimer hrt; + struct alarm alrm; + } u; + enum android_alarm_type type; +}; + +static struct devalarm alarms[ANDROID_ALARM_TYPE_COUNT]; + + +static int is_wakeup(enum android_alarm_type type) +{ + if (type == ANDROID_ALARM_RTC_WAKEUP || + type == ANDROID_ALARM_ELAPSED_REALTIME_WAKEUP) + return 1; + return 0; +} + + +static void devalarm_start(struct devalarm *alrm, ktime_t exp) +{ + if (is_wakeup(alrm->type)) + alarm_start(&alrm->u.alrm, exp); + else + hrtimer_start(&alrm->u.hrt, exp, HRTIMER_MODE_ABS); +} + + +static int devalarm_try_to_cancel(struct devalarm *alrm) +{ + int ret; + if (is_wakeup(alrm->type)) + ret = alarm_try_to_cancel(&alrm->u.alrm); + else + ret = hrtimer_try_to_cancel(&alrm->u.hrt); + return ret; +} + +static void devalarm_cancel(struct devalarm *alrm) +{ + if (is_wakeup(alrm->type)) + alarm_cancel(&alrm->u.alrm); + else + hrtimer_cancel(&alrm->u.hrt); +} + static long alarm_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { @@ -75,6 +111,8 @@ static long alarm_ioctl(struct file *file, unsigned int cmd, unsigned long arg) struct timespec new_alarm_time; struct timespec new_rtc_time; struct timespec tmp_time; + struct rtc_time new_rtc_tm; + struct rtc_device *rtc_dev; enum android_alarm_type alarm_type = ANDROID_ALARM_IOCTL_TO_TYPE(cmd); uint32_t alarm_type_mask = 1U << alarm_type; @@ -101,11 +139,11 @@ static long alarm_ioctl(struct file *file, unsigned int cmd, unsigned long arg) case ANDROID_ALARM_CLEAR(0): spin_lock_irqsave(&alarm_slock, flags); pr_alarm(IO, "alarm %d clear\n", alarm_type); - android_alarm_try_to_cancel(&alarms[alarm_type]); + devalarm_try_to_cancel(&alarms[alarm_type]); if (alarm_pending) { alarm_pending &= ~alarm_type_mask; if (!alarm_pending && !wait_pending) - wake_unlock(&alarm_wake_lock); + __pm_relax(&alarm_wake_lock); } alarm_enabled &= ~alarm_type_mask; spin_unlock_irqrestore(&alarm_slock, flags); @@ -132,8 +170,7 @@ from_old_alarm_set: pr_alarm(IO, "alarm %d set %ld.%09ld\n", alarm_type, new_alarm_time.tv_sec, new_alarm_time.tv_nsec); alarm_enabled |= alarm_type_mask; - android_alarm_start_range(&alarms[alarm_type], - timespec_to_ktime(new_alarm_time), + devalarm_start(&alarms[alarm_type], timespec_to_ktime(new_alarm_time)); spin_unlock_irqrestore(&alarm_slock, flags); if (ANDROID_ALARM_BASE_CMD(cmd) != ANDROID_ALARM_SET_AND_WAIT(0) @@ -144,7 +181,7 @@ from_old_alarm_set: spin_lock_irqsave(&alarm_slock, flags); pr_alarm(IO, "alarm wait\n"); if (!alarm_pending && wait_pending) { - wake_unlock(&alarm_wake_lock); + __pm_relax(&alarm_wake_lock); wait_pending = 0; } spin_unlock_irqrestore(&alarm_slock, flags); @@ -163,7 +200,13 @@ from_old_alarm_set: rv = -EFAULT; goto err1; } - rv = android_alarm_set_rtc(new_rtc_time); + rtc_time_to_tm(new_rtc_time.tv_sec, &new_rtc_tm); + rtc_dev = alarmtimer_get_rtcdev(); + rv = do_settimeofday(&new_rtc_time); + if (rv < 0) + goto err1; + if (rtc_dev) + rv = rtc_set_time(rtc_dev, &new_rtc_tm); spin_lock_irqsave(&alarm_slock, flags); alarm_pending |= ANDROID_ALARM_TIME_CHANGE_MASK; wake_up(&alarm_wait_queue); @@ -179,8 +222,7 @@ from_old_alarm_set: break; case ANDROID_ALARM_ELAPSED_REALTIME_WAKEUP: case ANDROID_ALARM_ELAPSED_REALTIME: - tmp_time = - ktime_to_timespec(alarm_get_elapsed_realtime()); + get_monotonic_boottime(&tmp_time); break; case ANDROID_ALARM_TYPE_COUNT: case ANDROID_ALARM_SYSTEMTIME: @@ -224,14 +266,14 @@ static int alarm_release(struct inode *inode, struct file *file) alarm_enabled &= ~alarm_type_mask; } spin_unlock_irqrestore(&alarm_slock, flags); - android_alarm_cancel(&alarms[i]); + devalarm_cancel(&alarms[i]); spin_lock_irqsave(&alarm_slock, flags); } if (alarm_pending | wait_pending) { if (alarm_pending) pr_alarm(INFO, "alarm_release: clear " "pending alarms %x\n", alarm_pending); - wake_unlock(&alarm_wake_lock); + __pm_relax(&alarm_wake_lock); wait_pending = 0; alarm_pending = 0; } @@ -241,15 +283,15 @@ static int alarm_release(struct inode *inode, struct file *file) return 0; } -static void alarm_triggered(struct android_alarm *alarm) +static void devalarm_triggered(struct devalarm *alarm) { unsigned long flags; uint32_t alarm_type_mask = 1U << alarm->type; - pr_alarm(INT, "alarm_triggered type %d\n", alarm->type); + pr_alarm(INT, "devalarm_triggered type %d\n", alarm->type); spin_lock_irqsave(&alarm_slock, flags); if (alarm_enabled & alarm_type_mask) { - wake_lock_timeout(&alarm_wake_lock, 5 * HZ); + __pm_wakeup_event(&alarm_wake_lock, 5000); /* 5secs */ alarm_enabled &= ~alarm_type_mask; alarm_pending |= alarm_type_mask; wake_up(&alarm_wait_queue); @@ -257,6 +299,25 @@ static void alarm_triggered(struct android_alarm *alarm) spin_unlock_irqrestore(&alarm_slock, flags); } + +static enum hrtimer_restart devalarm_hrthandler(struct hrtimer *hrt) +{ + struct devalarm *devalrm = container_of(hrt, struct devalarm, u.hrt); + + devalarm_triggered(devalrm); + return HRTIMER_NORESTART; +} + +static enum alarmtimer_restart devalarm_alarmhandler(struct alarm *alrm, + ktime_t now) +{ + struct devalarm *devalrm = container_of(alrm, struct devalarm, u.alrm); + + devalarm_triggered(devalrm); + return ALARMTIMER_NORESTART; +} + + static const struct file_operations alarm_fops = { .owner = THIS_MODULE, .unlocked_ioctl = alarm_ioctl, @@ -279,17 +340,31 @@ static int __init alarm_dev_init(void) if (err) return err; - for (i = 0; i < ANDROID_ALARM_TYPE_COUNT; i++) - android_alarm_init(&alarms[i], i, alarm_triggered); - wake_lock_init(&alarm_wake_lock, WAKE_LOCK_SUSPEND, "alarm"); + alarm_init(&alarms[ANDROID_ALARM_RTC_WAKEUP].u.alrm, + ALARM_REALTIME, devalarm_alarmhandler); + hrtimer_init(&alarms[ANDROID_ALARM_RTC].u.hrt, + CLOCK_REALTIME, HRTIMER_MODE_ABS); + alarm_init(&alarms[ANDROID_ALARM_ELAPSED_REALTIME_WAKEUP].u.alrm, + ALARM_BOOTTIME, devalarm_alarmhandler); + hrtimer_init(&alarms[ANDROID_ALARM_ELAPSED_REALTIME].u.hrt, + CLOCK_BOOTTIME, HRTIMER_MODE_ABS); + hrtimer_init(&alarms[ANDROID_ALARM_SYSTEMTIME].u.hrt, + CLOCK_MONOTONIC, HRTIMER_MODE_ABS); + + for (i = 0; i < ANDROID_ALARM_TYPE_COUNT; i++) { + alarms[i].type = i; + if (!is_wakeup(i)) + alarms[i].u.hrt.function = devalarm_hrthandler; + } + wakeup_source_init(&alarm_wake_lock, "alarm"); return 0; } static void __exit alarm_dev_exit(void) { misc_deregister(&alarm_device); - wake_lock_destroy(&alarm_wake_lock); + wakeup_source_trash(&alarm_wake_lock); } module_init(alarm_dev_init); diff --git a/drivers/staging/android/alarm.c b/drivers/staging/android/alarm.c deleted file mode 100644 index c68950b9e08..00000000000 --- a/drivers/staging/android/alarm.c +++ /dev/null @@ -1,601 +0,0 @@ -/* drivers/rtc/alarm.c - * - * Copyright (C) 2007-2009 Google, Inc. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/time.h> -#include <linux/module.h> -#include <linux/device.h> -#include <linux/miscdevice.h> -#include <linux/platform_device.h> -#include <linux/rtc.h> -#include <linux/sched.h> -#include <linux/spinlock.h> -#include "android_alarm.h" - -/* XXX - Hack out wakelocks, while they are out of tree */ -struct wake_lock { - int i; -}; -#define wake_lock(x) -#define wake_lock_timeout(x, y) -#define wake_unlock(x) -#define WAKE_LOCK_SUSPEND 0 -#define wake_lock_init(x, y, z) ((x)->i = 1) -#define wake_lock_destroy(x) - -#define ANDROID_ALARM_PRINT_ERROR (1U << 0) -#define ANDROID_ALARM_PRINT_INIT_STATUS (1U << 1) -#define ANDROID_ALARM_PRINT_TSET (1U << 2) -#define ANDROID_ALARM_PRINT_CALL (1U << 3) -#define ANDROID_ALARM_PRINT_SUSPEND (1U << 4) -#define ANDROID_ALARM_PRINT_INT (1U << 5) -#define ANDROID_ALARM_PRINT_FLOW (1U << 6) - -static int debug_mask = ANDROID_ALARM_PRINT_ERROR | \ - ANDROID_ALARM_PRINT_INIT_STATUS; -module_param_named(debug_mask, debug_mask, int, S_IRUGO | S_IWUSR | S_IWGRP); - -#define pr_alarm(debug_level_mask, args...) \ - do { \ - if (debug_mask & ANDROID_ALARM_PRINT_##debug_level_mask) { \ - pr_info(args); \ - } \ - } while (0) - -#define ANDROID_ALARM_WAKEUP_MASK ( \ - ANDROID_ALARM_RTC_WAKEUP_MASK | \ - ANDROID_ALARM_ELAPSED_REALTIME_WAKEUP_MASK) - -/* support old usespace code */ -#define ANDROID_ALARM_SET_OLD _IOW('a', 2, time_t) /* set alarm */ -#define ANDROID_ALARM_SET_AND_WAIT_OLD _IOW('a', 3, time_t) - -struct alarm_queue { - struct rb_root alarms; - struct rb_node *first; - struct hrtimer timer; - ktime_t delta; - bool stopped; - ktime_t stopped_time; -}; - -static struct rtc_device *alarm_rtc_dev; -static DEFINE_SPINLOCK(alarm_slock); -static DEFINE_MUTEX(alarm_setrtc_mutex); -static struct wake_lock alarm_rtc_wake_lock; -static struct platform_device *alarm_platform_dev; -struct alarm_queue alarms[ANDROID_ALARM_TYPE_COUNT]; -static bool suspended; - -static void update_timer_locked(struct alarm_queue *base, bool head_removed) -{ - struct android_alarm *alarm; - bool is_wakeup = base == &alarms[ANDROID_ALARM_RTC_WAKEUP] || - base == &alarms[ANDROID_ALARM_ELAPSED_REALTIME_WAKEUP]; - - if (base->stopped) { - pr_alarm(FLOW, "changed alarm while setting the wall time\n"); - return; - } - - if (is_wakeup && !suspended && head_removed) - wake_unlock(&alarm_rtc_wake_lock); - - if (!base->first) - return; - - alarm = container_of(base->first, struct android_alarm, node); - - pr_alarm(FLOW, "selected alarm, type %d, func %pF at %lld\n", - alarm->type, alarm->function, ktime_to_ns(alarm->expires)); - - if (is_wakeup && suspended) { - pr_alarm(FLOW, "changed alarm while suspened\n"); - wake_lock_timeout(&alarm_rtc_wake_lock, 1 * HZ); - return; - } - - hrtimer_try_to_cancel(&base->timer); - base->timer.node.expires = ktime_add(base->delta, alarm->expires); - base->timer._softexpires = ktime_add(base->delta, alarm->softexpires); - hrtimer_start_expires(&base->timer, HRTIMER_MODE_ABS); -} - -static void alarm_enqueue_locked(struct android_alarm *alarm) -{ - struct alarm_queue *base = &alarms[alarm->type]; - struct rb_node **link = &base->alarms.rb_node; - struct rb_node *parent = NULL; - struct android_alarm *entry; - int leftmost = 1; - bool was_first = false; - - pr_alarm(FLOW, "added alarm, type %d, func %pF at %lld\n", - alarm->type, alarm->function, ktime_to_ns(alarm->expires)); - - if (base->first == &alarm->node) { - base->first = rb_next(&alarm->node); - was_first = true; - } - if (!RB_EMPTY_NODE(&alarm->node)) { - rb_erase(&alarm->node, &base->alarms); - RB_CLEAR_NODE(&alarm->node); - } - - while (*link) { - parent = *link; - entry = rb_entry(parent, struct android_alarm, node); - /* - * We dont care about collisions. Nodes with - * the same expiry time stay together. - */ - if (alarm->expires.tv64 < entry->expires.tv64) { - link = &(*link)->rb_left; - } else { - link = &(*link)->rb_right; - leftmost = 0; - } - } - if (leftmost) - base->first = &alarm->node; - if (leftmost || was_first) - update_timer_locked(base, was_first); - - rb_link_node(&alarm->node, parent, link); - rb_insert_color(&alarm->node, &base->alarms); -} - -/** - * android_alarm_init - initialize an alarm - * @alarm: the alarm to be initialized - * @type: the alarm type to be used - * @function: alarm callback function - */ -void android_alarm_init(struct android_alarm *alarm, - enum android_alarm_type type, void (*function)(struct android_alarm *)) -{ - RB_CLEAR_NODE(&alarm->node); - alarm->type = type; - alarm->function = function; - - pr_alarm(FLOW, "created alarm, type %d, func %pF\n", type, function); -} - - -/** - * android_alarm_start_range - (re)start an alarm - * @alarm: the alarm to be added - * @start: earliest expiry time - * @end: expiry time - */ -void android_alarm_start_range(struct android_alarm *alarm, ktime_t start, - ktime_t end) -{ - unsigned long flags; - - spin_lock_irqsave(&alarm_slock, flags); - alarm->softexpires = start; - alarm->expires = end; - alarm_enqueue_locked(alarm); - spin_unlock_irqrestore(&alarm_slock, flags); -} - -/** - * android_alarm_try_to_cancel - try to deactivate an alarm - * @alarm: alarm to stop - * - * Returns: - * 0 when the alarm was not active - * 1 when the alarm was active - * -1 when the alarm may currently be excuting the callback function and - * cannot be stopped (it may also be inactive) - */ -int android_alarm_try_to_cancel(struct android_alarm *alarm) -{ - struct alarm_queue *base = &alarms[alarm->type]; - unsigned long flags; - bool first = false; - int ret = 0; - - spin_lock_irqsave(&alarm_slock, flags); - if (!RB_EMPTY_NODE(&alarm->node)) { - pr_alarm(FLOW, "canceled alarm, type %d, func %pF at %lld\n", - alarm->type, alarm->function, - ktime_to_ns(alarm->expires)); - ret = 1; - if (base->first == &alarm->node) { - base->first = rb_next(&alarm->node); - first = true; - } - rb_erase(&alarm->node, &base->alarms); - RB_CLEAR_NODE(&alarm->node); - if (first) - update_timer_locked(base, true); - } else - pr_alarm(FLOW, "tried to cancel alarm, type %d, func %pF\n", - alarm->type, alarm->function); - spin_unlock_irqrestore(&alarm_slock, flags); - if (!ret && hrtimer_callback_running(&base->timer)) - ret = -1; - return ret; -} - -/** - * android_alarm_cancel - cancel an alarm and wait for the handler to finish. - * @alarm: the alarm to be cancelled - * - * Returns: - * 0 when the alarm was not active - * 1 when the alarm was active - */ -int android_alarm_cancel(struct android_alarm *alarm) -{ - for (;;) { - int ret = android_alarm_try_to_cancel(alarm); - if (ret >= 0) - return ret; - cpu_relax(); - } -} - -/** - * alarm_set_rtc - set the kernel and rtc walltime - * @new_time: timespec value containing the new time - */ -int android_alarm_set_rtc(struct timespec new_time) -{ - int i; - int ret; - unsigned long flags; - struct rtc_time rtc_new_rtc_time; - struct timespec tmp_time; - - rtc_time_to_tm(new_time.tv_sec, &rtc_new_rtc_time); - - pr_alarm(TSET, "set rtc %ld %ld - rtc %02d:%02d:%02d %02d/%02d/%04d\n", - new_time.tv_sec, new_time.tv_nsec, - rtc_new_rtc_time.tm_hour, rtc_new_rtc_time.tm_min, - rtc_new_rtc_time.tm_sec, rtc_new_rtc_time.tm_mon + 1, - rtc_new_rtc_time.tm_mday, - rtc_new_rtc_time.tm_year + 1900); - - mutex_lock(&alarm_setrtc_mutex); - spin_lock_irqsave(&alarm_slock, flags); - wake_lock(&alarm_rtc_wake_lock); - getnstimeofday(&tmp_time); - for (i = 0; i < ANDROID_ALARM_SYSTEMTIME; i++) { - hrtimer_try_to_cancel(&alarms[i].timer); - alarms[i].stopped = true; - alarms[i].stopped_time = timespec_to_ktime(tmp_time); - } - alarms[ANDROID_ALARM_ELAPSED_REALTIME_WAKEUP].delta = - alarms[ANDROID_ALARM_ELAPSED_REALTIME].delta = - ktime_sub(alarms[ANDROID_ALARM_ELAPSED_REALTIME].delta, - timespec_to_ktime(timespec_sub(tmp_time, new_time))); - spin_unlock_irqrestore(&alarm_slock, flags); - ret = do_settimeofday(&new_time); - spin_lock_irqsave(&alarm_slock, flags); - for (i = 0; i < ANDROID_ALARM_SYSTEMTIME; i++) { - alarms[i].stopped = false; - update_timer_locked(&alarms[i], false); - } - spin_unlock_irqrestore(&alarm_slock, flags); - if (ret < 0) { - pr_alarm(ERROR, "alarm_set_rtc: Failed to set time\n"); - goto err; - } - if (!alarm_rtc_dev) { - pr_alarm(ERROR, - "alarm_set_rtc: no RTC, time will be lost on reboot\n"); - goto err; - } - ret = rtc_set_time(alarm_rtc_dev, &rtc_new_rtc_time); - if (ret < 0) - pr_alarm(ERROR, "alarm_set_rtc: " - "Failed to set RTC, time will be lost on reboot\n"); -err: - wake_unlock(&alarm_rtc_wake_lock); - mutex_unlock(&alarm_setrtc_mutex); - return ret; -} - -/** - * alarm_get_elapsed_realtime - get the elapsed real time in ktime_t format - * - * returns the time in ktime_t format - */ -ktime_t alarm_get_elapsed_realtime(void) -{ - ktime_t now; - unsigned long flags; - struct alarm_queue *base = &alarms[ANDROID_ALARM_ELAPSED_REALTIME]; - - spin_lock_irqsave(&alarm_slock, flags); - now = base->stopped ? base->stopped_time : ktime_get_real(); - now = ktime_sub(now, base->delta); - spin_unlock_irqrestore(&alarm_slock, flags); - return now; -} - -static enum hrtimer_restart alarm_timer_triggered(struct hrtimer *timer) -{ - struct alarm_queue *base; - struct android_alarm *alarm; - unsigned long flags; - ktime_t now; - - spin_lock_irqsave(&alarm_slock, flags); - - base = container_of(timer, struct alarm_queue, timer); - now = base->stopped ? base->stopped_time : hrtimer_cb_get_time(timer); - now = ktime_sub(now, base->delta); - - pr_alarm(INT, "alarm_timer_triggered type %ld at %lld\n", - base - alarms, ktime_to_ns(now)); - - while (base->first) { - alarm = container_of(base->first, struct android_alarm, node); - if (alarm->softexpires.tv64 > now.tv64) { - pr_alarm(FLOW, "don't call alarm, %pF, %lld (s %lld)\n", - alarm->function, ktime_to_ns(alarm->expires), - ktime_to_ns(alarm->softexpires)); - break; - } - base->first = rb_next(&alarm->node); - rb_erase(&alarm->node, &base->alarms); - RB_CLEAR_NODE(&alarm->node); - pr_alarm(CALL, "call alarm, type %d, func %pF, %lld (s %lld)\n", - alarm->type, alarm->function, - ktime_to_ns(alarm->expires), - ktime_to_ns(alarm->softexpires)); - spin_unlock_irqrestore(&alarm_slock, flags); - alarm->function(alarm); - spin_lock_irqsave(&alarm_slock, flags); - } - if (!base->first) - pr_alarm(FLOW, "no more alarms of type %ld\n", base - alarms); - update_timer_locked(base, true); - spin_unlock_irqrestore(&alarm_slock, flags); - return HRTIMER_NORESTART; -} - -static void alarm_triggered_func(void *p) -{ - struct rtc_device *rtc = alarm_rtc_dev; - if (!(rtc->irq_data & RTC_AF)) - return; - pr_alarm(INT, "rtc alarm triggered\n"); - wake_lock_timeout(&alarm_rtc_wake_lock, 1 * HZ); -} - -static int alarm_suspend(struct platform_device *pdev, pm_message_t state) -{ - int err = 0; - unsigned long flags; - struct rtc_wkalrm rtc_alarm; - struct rtc_time rtc_current_rtc_time; - unsigned long rtc_current_time; - unsigned long rtc_alarm_time; - struct timespec rtc_delta; - struct timespec wall_time; - struct alarm_queue *wakeup_queue = NULL; - struct alarm_queue *tmp_queue = NULL; - - pr_alarm(SUSPEND, "alarm_suspend(%p, %d)\n", pdev, state.event); - - spin_lock_irqsave(&alarm_slock, flags); - suspended = true; - spin_unlock_irqrestore(&alarm_slock, flags); - - hrtimer_cancel(&alarms[ANDROID_ALARM_RTC_WAKEUP].timer); - hrtimer_cancel(&alarms[ - ANDROID_ALARM_ELAPSED_REALTIME_WAKEUP].timer); - - tmp_queue = &alarms[ANDROID_ALARM_RTC_WAKEUP]; - if (tmp_queue->first) - wakeup_queue = tmp_queue; - tmp_queue = &alarms[ANDROID_ALARM_ELAPSED_REALTIME_WAKEUP]; - if (tmp_queue->first && (!wakeup_queue || - hrtimer_get_expires(&tmp_queue->timer).tv64 < - hrtimer_get_expires(&wakeup_queue->timer).tv64)) - wakeup_queue = tmp_queue; - if (wakeup_queue) { - rtc_read_time(alarm_rtc_dev, &rtc_current_rtc_time); - getnstimeofday(&wall_time); - rtc_tm_to_time(&rtc_current_rtc_time, &rtc_current_time); - set_normalized_timespec(&rtc_delta, - wall_time.tv_sec - rtc_current_time, - wall_time.tv_nsec); - - rtc_alarm_time = timespec_sub(ktime_to_timespec( - hrtimer_get_expires(&wakeup_queue->timer)), - rtc_delta).tv_sec; - - rtc_time_to_tm(rtc_alarm_time, &rtc_alarm.time); - rtc_alarm.enabled = 1; - rtc_set_alarm(alarm_rtc_dev, &rtc_alarm); - rtc_read_time(alarm_rtc_dev, &rtc_current_rtc_time); - rtc_tm_to_time(&rtc_current_rtc_time, &rtc_current_time); - pr_alarm(SUSPEND, - "rtc alarm set at %ld, now %ld, rtc delta %ld.%09ld\n", - rtc_alarm_time, rtc_current_time, - rtc_delta.tv_sec, rtc_delta.tv_nsec); - if (rtc_current_time + 1 >= rtc_alarm_time) { - pr_alarm(SUSPEND, "alarm about to go off\n"); - memset(&rtc_alarm, 0, sizeof(rtc_alarm)); - rtc_alarm.enabled = 0; - rtc_set_alarm(alarm_rtc_dev, &rtc_alarm); - - spin_lock_irqsave(&alarm_slock, flags); - suspended = false; - wake_lock_timeout(&alarm_rtc_wake_lock, 2 * HZ); - update_timer_locked(&alarms[ANDROID_ALARM_RTC_WAKEUP], - false); - update_timer_locked(&alarms[ - ANDROID_ALARM_ELAPSED_REALTIME_WAKEUP], false); - err = -EBUSY; - spin_unlock_irqrestore(&alarm_slock, flags); - } - } - return err; -} - -static int alarm_resume(struct platform_device *pdev) -{ - struct rtc_wkalrm alarm; - unsigned long flags; - - pr_alarm(SUSPEND, "alarm_resume(%p)\n", pdev); - - memset(&alarm, 0, sizeof(alarm)); - alarm.enabled = 0; - rtc_set_alarm(alarm_rtc_dev, &alarm); - - spin_lock_irqsave(&alarm_slock, flags); - suspended = false; - update_timer_locked(&alarms[ANDROID_ALARM_RTC_WAKEUP], false); - update_timer_locked(&alarms[ANDROID_ALARM_ELAPSED_REALTIME_WAKEUP], - false); - spin_unlock_irqrestore(&alarm_slock, flags); - - return 0; -} - -static struct rtc_task alarm_rtc_task = { - .func = alarm_triggered_func -}; - -static int rtc_alarm_add_device(struct device *dev, - struct class_interface *class_intf) -{ - int err; - struct rtc_device *rtc = to_rtc_device(dev); - - mutex_lock(&alarm_setrtc_mutex); - - if (alarm_rtc_dev) { - err = -EBUSY; - goto err1; - } - - alarm_platform_dev = - platform_device_register_simple("alarm", -1, NULL, 0); - if (IS_ERR(alarm_platform_dev)) { - err = PTR_ERR(alarm_platform_dev); - goto err2; - } - err = rtc_irq_register(rtc, &alarm_rtc_task); - if (err) - goto err3; - alarm_rtc_dev = rtc; - pr_alarm(INIT_STATUS, "using rtc device, %s, for alarms", rtc->name); - mutex_unlock(&alarm_setrtc_mutex); - - return 0; - -err3: - platform_device_unregister(alarm_platform_dev); -err2: -err1: - mutex_unlock(&alarm_setrtc_mutex); - return err; -} - -static void rtc_alarm_remove_device(struct device *dev, - struct class_interface *class_intf) -{ - if (dev == &alarm_rtc_dev->dev) { - pr_alarm(INIT_STATUS, "lost rtc device for alarms"); - rtc_irq_unregister(alarm_rtc_dev, &alarm_rtc_task); - platform_device_unregister(alarm_platform_dev); - alarm_rtc_dev = NULL; - } -} - -static struct class_interface rtc_alarm_interface = { - .add_dev = &rtc_alarm_add_device, - .remove_dev = &rtc_alarm_remove_device, -}; - -static struct platform_driver alarm_driver = { - .suspend = alarm_suspend, - .resume = alarm_resume, - .driver = { - .name = "alarm" - } -}; - -static int __init alarm_late_init(void) -{ - unsigned long flags; - struct timespec tmp_time, system_time; - - /* this needs to run after the rtc is read at boot */ - spin_lock_irqsave(&alarm_slock, flags); - /* We read the current rtc and system time so we can later calulate - * elasped realtime to be (boot_systemtime + rtc - boot_rtc) == - * (rtc - (boot_rtc - boot_systemtime)) - */ - getnstimeofday(&tmp_time); - ktime_get_ts(&system_time); - alarms[ANDROID_ALARM_ELAPSED_REALTIME_WAKEUP].delta = - alarms[ANDROID_ALARM_ELAPSED_REALTIME].delta = - timespec_to_ktime(timespec_sub(tmp_time, system_time)); - - spin_unlock_irqrestore(&alarm_slock, flags); - return 0; -} - -static int __init alarm_driver_init(void) -{ - int err; - int i; - - for (i = 0; i < ANDROID_ALARM_SYSTEMTIME; i++) { - hrtimer_init(&alarms[i].timer, - CLOCK_REALTIME, HRTIMER_MODE_ABS); - alarms[i].timer.function = alarm_timer_triggered; - } - hrtimer_init(&alarms[ANDROID_ALARM_SYSTEMTIME].timer, - CLOCK_MONOTONIC, HRTIMER_MODE_ABS); - alarms[ANDROID_ALARM_SYSTEMTIME].timer.function = alarm_timer_triggered; - err = platform_driver_register(&alarm_driver); - if (err < 0) - goto err1; - wake_lock_init(&alarm_rtc_wake_lock, WAKE_LOCK_SUSPEND, "alarm_rtc"); - rtc_alarm_interface.class = rtc_class; - err = class_interface_register(&rtc_alarm_interface); - if (err < 0) - goto err2; - - return 0; - -err2: - wake_lock_destroy(&alarm_rtc_wake_lock); - platform_driver_unregister(&alarm_driver); -err1: - return err; -} - -static void __exit alarm_exit(void) -{ - class_interface_unregister(&rtc_alarm_interface); - wake_lock_destroy(&alarm_rtc_wake_lock); - platform_driver_unregister(&alarm_driver); -} - -late_initcall(alarm_late_init); -module_init(alarm_driver_init); -module_exit(alarm_exit); - diff --git a/drivers/staging/android/android_alarm.h b/drivers/staging/android/android_alarm.h index 6eecbde2ef6..d0cafd63719 100644 --- a/drivers/staging/android/android_alarm.h +++ b/drivers/staging/android/android_alarm.h @@ -33,65 +33,6 @@ enum android_alarm_type { /* ANDROID_ALARM_TIME_CHANGE = 16 */ }; -#ifdef __KERNEL__ - -#include <linux/ktime.h> -#include <linux/rbtree.h> - -/* - * The alarm interface is similar to the hrtimer interface but adds support - * for wakeup from suspend. It also adds an elapsed realtime clock that can - * be used for periodic timers that need to keep runing while the system is - * suspended and not be disrupted when the wall time is set. - */ - -/** - * struct alarm - the basic alarm structure - * @node: red black tree node for time ordered insertion - * @type: alarm type. rtc/elapsed-realtime/systemtime, wakeup/non-wakeup. - * @softexpires: the absolute earliest expiry time of the alarm. - * @expires: the absolute expiry time. - * @function: alarm expiry callback function - * - * The alarm structure must be initialized by alarm_init() - * - */ - -struct android_alarm { - struct rb_node node; - enum android_alarm_type type; - ktime_t softexpires; - ktime_t expires; - void (*function)(struct android_alarm *); -}; - -void android_alarm_init(struct android_alarm *alarm, - enum android_alarm_type type, void (*function)(struct android_alarm *)); -void android_alarm_start_range(struct android_alarm *alarm, ktime_t start, - ktime_t end); -int android_alarm_try_to_cancel(struct android_alarm *alarm); -int android_alarm_cancel(struct android_alarm *alarm); -ktime_t alarm_get_elapsed_realtime(void); - -/* set rtc while preserving elapsed realtime */ -int android_alarm_set_rtc(const struct timespec ts); - -#ifdef CONFIG_ANDROID_ALARM_OLDDRV_COMPAT -/* - * Some older drivers depend on the old API, - * so provide compatability macros for now. - */ -#define alarm android_alarm -#define alarm_init(x, y, z) android_alarm_init(x, y, z) -#define alarm_start_range(x, y, z) android_alarm_start_range(x, y, z) -#define alarm_try_to_cancel(x) android_alarm_try_to_cancel(x) -#define alarm_cancel(x) android_alarm_cancel(x) -#define alarm_set_rtc(x) android_alarm_set_rtc(x) -#endif - - -#endif - enum android_alarm_return_flags { ANDROID_ALARM_RTC_WAKEUP_MASK = 1U << ANDROID_ALARM_RTC_WAKEUP, ANDROID_ALARM_RTC_MASK = 1U << ANDROID_ALARM_RTC, diff --git a/drivers/staging/android/binder.h b/drivers/staging/android/binder.h index 25ab6f2759e..2f7d195d8b1 100644 --- a/drivers/staging/android/binder.h +++ b/drivers/staging/android/binder.h @@ -53,17 +53,17 @@ struct flat_binder_object { /* 8 bytes of data. */ union { - void *binder; /* local object */ + void __user *binder; /* local object */ signed long handle; /* remote object */ }; /* extra data associated with local object */ - void *cookie; + void __user *cookie; }; /* * On 64-bit platforms where user code may run in 32-bits the driver must - * translate the buffer (and local binder) addresses apropriately. + * translate the buffer (and local binder) addresses appropriately. */ struct binder_write_read { @@ -139,9 +139,9 @@ struct binder_transaction_data { union { struct { /* transaction data */ - const void *buffer; + const void __user *buffer; /* offsets from buffer to flat_binder_object structs */ - const void *offsets; + const void __user *offsets; } ptr; uint8_t buf[8]; } data; diff --git a/drivers/staging/android/persistent_ram.c b/drivers/staging/android/persistent_ram.c index 8d8c1e33e0f..8407112f701 100644 --- a/drivers/staging/android/persistent_ram.c +++ b/drivers/staging/android/persistent_ram.c @@ -424,11 +424,11 @@ struct persistent_ram_zone *__persistent_ram_init(struct device *dev, bool ecc) if (buffer_size(prz) > prz->buffer_size || buffer_start(prz) > buffer_size(prz)) pr_info("persistent_ram: found existing invalid buffer," - " size %ld, start %ld\n", + " size %zu, start %zu\n", buffer_size(prz), buffer_start(prz)); else { pr_info("persistent_ram: found existing buffer," - " size %ld, start %ld\n", + " size %zu, start %zu\n", buffer_size(prz), buffer_start(prz)); persistent_ram_save_old(prz); } diff --git a/drivers/staging/android/timed_output.c b/drivers/staging/android/timed_output.c index f373422308e..38d930cadad 100644 --- a/drivers/staging/android/timed_output.c +++ b/drivers/staging/android/timed_output.c @@ -99,6 +99,7 @@ EXPORT_SYMBOL_GPL(timed_output_dev_register); void timed_output_dev_unregister(struct timed_output_dev *tdev) { + tdev->enable(tdev, 0); device_remove_file(tdev->dev, &dev_attr_enable); device_destroy(timed_output_class, MKDEV(0, tdev->index)); dev_set_drvdata(tdev->dev, NULL); diff --git a/drivers/staging/asus_oled/asus_oled.c b/drivers/staging/asus_oled/asus_oled.c index 83549d9cfef..510d7963921 100644 --- a/drivers/staging/asus_oled/asus_oled.c +++ b/drivers/staging/asus_oled/asus_oled.c @@ -782,20 +782,20 @@ static int __init asus_oled_init(void) oled_class = class_create(THIS_MODULE, ASUS_OLED_UNDERSCORE_NAME); if (IS_ERR(oled_class)) { - err("Error creating " ASUS_OLED_UNDERSCORE_NAME " class"); + printk(KERN_ERR "Error creating " ASUS_OLED_UNDERSCORE_NAME " class\n"); return PTR_ERR(oled_class); } retval = class_create_file(oled_class, &class_attr_version.attr); if (retval) { - err("Error creating class version file"); + printk(KERN_ERR "Error creating class version file\n"); goto error; } retval = usb_register(&oled_driver); if (retval) { - err("usb_register failed. Error number %d", retval); + printk(KERN_ERR "usb_register failed. Error number %d\n", retval); goto error; } diff --git a/drivers/staging/bcm/DDRInit.c b/drivers/staging/bcm/DDRInit.c index 1c7db81a1ee..2b46f4d4ef0 100644 --- a/drivers/staging/bcm/DDRInit.c +++ b/drivers/staging/bcm/DDRInit.c @@ -1115,20 +1115,20 @@ int download_ddr_settings(PMINI_ADAPTER Adapter) { case DDR_80_MHZ: psDDRSetting = asT3LP_DDRSetting80MHz; - RegCount = (sizeof(asT3LP_DDRSetting80MHz)/sizeof(DDR_SET_NODE)); + RegCount = ARRAY_SIZE(asT3LP_DDRSetting80MHz); RegCount -= T3LP_SKIP_CLOCK_PROGRAM_DUMP_80MHZ ; psDDRSetting += T3LP_SKIP_CLOCK_PROGRAM_DUMP_80MHZ; break; case DDR_100_MHZ: psDDRSetting = asT3LP_DDRSetting100MHz; - RegCount = (sizeof(asT3LP_DDRSetting100MHz)/sizeof(DDR_SET_NODE)); + RegCount = ARRAY_SIZE(asT3LP_DDRSetting100MHz); RegCount -= T3LP_SKIP_CLOCK_PROGRAM_DUMP_100MHZ ; psDDRSetting += T3LP_SKIP_CLOCK_PROGRAM_DUMP_100MHZ; break; case DDR_133_MHZ: bOverrideSelfRefresh = TRUE; psDDRSetting = asT3LP_DDRSetting133MHz; - RegCount = (sizeof(asT3LP_DDRSetting133MHz)/sizeof(DDR_SET_NODE)); + RegCount = ARRAY_SIZE(asT3LP_DDRSetting133MHz); RegCount -= T3LP_SKIP_CLOCK_PROGRAM_DUMP_133MHZ ; psDDRSetting += T3LP_SKIP_CLOCK_PROGRAM_DUMP_133MHZ; break; @@ -1146,20 +1146,20 @@ int download_ddr_settings(PMINI_ADAPTER Adapter) { case DDR_80_MHZ: psDDRSetting = asT3LPB_DDRSetting80MHz; - RegCount=(sizeof(asT3LPB_DDRSetting80MHz)/sizeof(DDR_SET_NODE)); + RegCount=ARRAY_SIZE(asT3LPB_DDRSetting80MHz); RegCount -= T3LPB_SKIP_CLOCK_PROGRAM_DUMP_80MHZ ; psDDRSetting += T3LPB_SKIP_CLOCK_PROGRAM_DUMP_80MHZ; break; case DDR_100_MHZ: psDDRSetting = asT3LPB_DDRSetting100MHz; - RegCount = (sizeof(asT3LPB_DDRSetting100MHz)/sizeof(DDR_SET_NODE)); + RegCount = ARRAY_SIZE(asT3LPB_DDRSetting100MHz); RegCount -= T3LPB_SKIP_CLOCK_PROGRAM_DUMP_100MHZ ; psDDRSetting += T3LPB_SKIP_CLOCK_PROGRAM_DUMP_100MHZ; break; case DDR_133_MHZ: bOverrideSelfRefresh = TRUE; psDDRSetting = asT3LPB_DDRSetting133MHz; - RegCount = (sizeof(asT3LPB_DDRSetting133MHz)/sizeof(DDR_SET_NODE)); + RegCount = ARRAY_SIZE(asT3LPB_DDRSetting133MHz); RegCount -= T3LPB_SKIP_CLOCK_PROGRAM_DUMP_133MHZ ; psDDRSetting += T3LPB_SKIP_CLOCK_PROGRAM_DUMP_133MHZ; break; @@ -1167,7 +1167,7 @@ int download_ddr_settings(PMINI_ADAPTER Adapter) case DDR_160_MHZ: bOverrideSelfRefresh = TRUE; psDDRSetting = asT3LPB_DDRSetting160MHz; - RegCount = sizeof(asT3LPB_DDRSetting160MHz)/sizeof(DDR_SET_NODE); + RegCount = ARRAY_SIZE(asT3LPB_DDRSetting160MHz); RegCount -= T3LPB_SKIP_CLOCK_PROGRAM_DUMP_160MHZ; psDDRSetting += T3LPB_SKIP_CLOCK_PROGRAM_DUMP_160MHZ; @@ -1181,19 +1181,19 @@ int download_ddr_settings(PMINI_ADAPTER Adapter) { case DDR_80_MHZ: psDDRSetting = asT3_DDRSetting80MHz; - RegCount = (sizeof(asT3_DDRSetting80MHz)/sizeof(DDR_SET_NODE)); + RegCount = ARRAY_SIZE(asT3_DDRSetting80MHz); RegCount-=T3_SKIP_CLOCK_PROGRAM_DUMP_80MHZ ; psDDRSetting += T3_SKIP_CLOCK_PROGRAM_DUMP_80MHZ; break; case DDR_100_MHZ: psDDRSetting = asT3_DDRSetting100MHz; - RegCount = (sizeof(asT3_DDRSetting100MHz)/sizeof(DDR_SET_NODE)); + RegCount = ARRAY_SIZE(asT3_DDRSetting100MHz); RegCount-=T3_SKIP_CLOCK_PROGRAM_DUMP_100MHZ ; psDDRSetting += T3_SKIP_CLOCK_PROGRAM_DUMP_100MHZ; break; case DDR_133_MHZ: psDDRSetting = asT3_DDRSetting133MHz; - RegCount = (sizeof(asT3_DDRSetting133MHz)/sizeof(DDR_SET_NODE)); + RegCount = ARRAY_SIZE(asT3_DDRSetting133MHz); RegCount-=T3_SKIP_CLOCK_PROGRAM_DUMP_133MHZ ; psDDRSetting += T3_SKIP_CLOCK_PROGRAM_DUMP_133MHZ ; break; @@ -1207,20 +1207,20 @@ int download_ddr_settings(PMINI_ADAPTER Adapter) { case DDR_80_MHZ: psDDRSetting = asT3B_DDRSetting80MHz; - RegCount = (sizeof(asT3B_DDRSetting80MHz)/sizeof(DDR_SET_NODE)); + RegCount = ARRAY_SIZE(asT3B_DDRSetting80MHz); RegCount -= T3B_SKIP_CLOCK_PROGRAM_DUMP_80MHZ ; psDDRSetting += T3B_SKIP_CLOCK_PROGRAM_DUMP_80MHZ; break; case DDR_100_MHZ: psDDRSetting = asT3B_DDRSetting100MHz; - RegCount = (sizeof(asT3B_DDRSetting100MHz)/sizeof(DDR_SET_NODE)); + RegCount = ARRAY_SIZE(asT3B_DDRSetting100MHz); RegCount -= T3B_SKIP_CLOCK_PROGRAM_DUMP_100MHZ ; psDDRSetting += T3B_SKIP_CLOCK_PROGRAM_DUMP_100MHZ; break; case DDR_133_MHZ: bOverrideSelfRefresh = TRUE; psDDRSetting = asT3B_DDRSetting133MHz; - RegCount = (sizeof(asT3B_DDRSetting133MHz)/sizeof(DDR_SET_NODE)); + RegCount = ARRAY_SIZE(asT3B_DDRSetting133MHz); RegCount -= T3B_SKIP_CLOCK_PROGRAM_DUMP_133MHZ ; psDDRSetting += T3B_SKIP_CLOCK_PROGRAM_DUMP_133MHZ; break; diff --git a/drivers/staging/bcm/IPv6Protocol.c b/drivers/staging/bcm/IPv6Protocol.c index 5b4fd372ec3..1da21642c18 100644 --- a/drivers/staging/bcm/IPv6Protocol.c +++ b/drivers/staging/bcm/IPv6Protocol.c @@ -1,51 +1,52 @@ #include "headers.h" -static BOOLEAN MatchSrcIpv6Address(S_CLASSIFIER_RULE *pstClassifierRule,IPV6Header *pstIpv6Header); -static BOOLEAN MatchDestIpv6Address(S_CLASSIFIER_RULE *pstClassifierRule,IPV6Header *pstIpv6Header); +static BOOLEAN MatchSrcIpv6Address(S_CLASSIFIER_RULE *pstClassifierRule, + IPV6Header *pstIpv6Header); +static BOOLEAN MatchDestIpv6Address(S_CLASSIFIER_RULE *pstClassifierRule, + IPV6Header *pstIpv6Header); static VOID DumpIpv6Header(IPV6Header *pstIpv6Header); -static UCHAR * GetNextIPV6ChainedHeader(UCHAR **ppucPayload,UCHAR *pucNextHeader,BOOLEAN *bParseDone,USHORT *pusPayloadLength) +static UCHAR *GetNextIPV6ChainedHeader(UCHAR **ppucPayload, + UCHAR *pucNextHeader, BOOLEAN *bParseDone, USHORT *pusPayloadLength) { UCHAR *pucRetHeaderPtr = NULL; UCHAR *pucPayloadPtr = NULL; USHORT usNextHeaderOffset = 0 ; - PMINI_ADAPTER Adapter = GET_BCM_ADAPTER(gblpnetdev); + PMINI_ADAPTER Adapter = GET_BCM_ADAPTER(gblpnetdev); - if((NULL == ppucPayload) || (*pusPayloadLength == 0) || (*bParseDone)) - { + if ((ppucPayload == NULL) || (*pusPayloadLength == 0) || + (*bParseDone)) { *bParseDone = TRUE; return NULL; - } pucRetHeaderPtr = *ppucPayload; pucPayloadPtr = *ppucPayload; - if(!pucRetHeaderPtr || !pucPayloadPtr) - { + if (!pucRetHeaderPtr || !pucPayloadPtr) { *bParseDone = TRUE; return NULL; } - //Get the Nextt Header Type + /* Get the Nextt Header Type */ *bParseDone = FALSE; - - switch(*pucNextHeader) - { + switch (*pucNextHeader) { case IPV6HDR_TYPE_HOPBYHOP: { - BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\nIPv6 HopByHop Header"); - usNextHeaderOffset+=sizeof(IPV6HopByHopOptionsHeader); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, + DBG_LVL_ALL, "\nIPv6 HopByHop Header"); + usNextHeaderOffset += sizeof(IPV6HopByHopOptionsHeader); } break; case IPV6HDR_TYPE_ROUTING: { IPV6RoutingHeader *pstIpv6RoutingHeader; - BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\nIPv6 Routing Header"); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, + DBG_LVL_ALL, "\nIPv6 Routing Header"); pstIpv6RoutingHeader = (IPV6RoutingHeader *)pucPayloadPtr; usNextHeaderOffset += sizeof(IPV6RoutingHeader); usNextHeaderOffset += pstIpv6RoutingHeader->ucNumAddresses * IPV6_ADDRESS_SIZEINBYTES; @@ -54,8 +55,10 @@ static UCHAR * GetNextIPV6ChainedHeader(UCHAR **ppucPayload,UCHAR *pucNextHeader break; case IPV6HDR_TYPE_FRAGMENTATION: { - BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\nIPv6 Fragmentation Header"); - usNextHeaderOffset+= sizeof(IPV6FragmentHeader); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, + DBG_LVL_ALL, + "\nIPv6 Fragmentation Header"); + usNextHeaderOffset += sizeof(IPV6FragmentHeader); } break; @@ -63,9 +66,11 @@ static UCHAR * GetNextIPV6ChainedHeader(UCHAR **ppucPayload,UCHAR *pucNextHeader { IPV6DestOptionsHeader *pstIpv6DestOptsHdr = (IPV6DestOptionsHeader *)pucPayloadPtr; int nTotalOptions = pstIpv6DestOptsHdr->ucHdrExtLen; - BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\nIPv6 DestOpts Header Header"); - usNextHeaderOffset+= sizeof(IPV6DestOptionsHeader); - usNextHeaderOffset+= nTotalOptions * IPV6_DESTOPTS_HDR_OPTIONSIZE ; + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, + DBG_LVL_ALL, + "\nIPv6 DestOpts Header Header"); + usNextHeaderOffset += sizeof(IPV6DestOptionsHeader); + usNextHeaderOffset += nTotalOptions * IPV6_DESTOPTS_HDR_OPTIONSIZE ; } break; @@ -73,36 +78,43 @@ static UCHAR * GetNextIPV6ChainedHeader(UCHAR **ppucPayload,UCHAR *pucNextHeader { IPV6AuthenticationHeader *pstIpv6AuthHdr = (IPV6AuthenticationHeader *)pucPayloadPtr; int nHdrLen = pstIpv6AuthHdr->ucLength; - BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\nIPv6 Authentication Header"); - usNextHeaderOffset+= nHdrLen * 4; + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, + DBG_LVL_ALL, + "\nIPv6 Authentication Header"); + usNextHeaderOffset += nHdrLen * 4; } break; case IPV6HDR_TYPE_ENCRYPTEDSECURITYPAYLOAD: { - BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\nIPv6 Encrypted Security Payload Header"); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, + DBG_LVL_ALL, + "\nIPv6 Encrypted Security Payload Header"); *bParseDone = TRUE; } break; case IPV6_ICMP_HDR_TYPE: { - BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, " ICMP Header"); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, + DBG_LVL_ALL, "\nICMP Header"); *bParseDone = TRUE; } break; case TCP_HEADER_TYPE: { - BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, " \nTCP Header"); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, + DBG_LVL_ALL, "\nTCP Header"); *bParseDone = TRUE; } break; case UDP_HEADER_TYPE: { - BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, " \nUDP Header"); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, + DBG_LVL_ALL, "\nUDP Header"); *bParseDone = TRUE; } break; - default : + default: { *bParseDone = TRUE; @@ -112,53 +124,49 @@ static UCHAR * GetNextIPV6ChainedHeader(UCHAR **ppucPayload,UCHAR *pucNextHeader } - if(*bParseDone == FALSE) - { - if(*pusPayloadLength <= usNextHeaderOffset) - { + if (*bParseDone == FALSE) { + if (*pusPayloadLength <= usNextHeaderOffset) { *bParseDone = TRUE; - } - else - { + } else { *pucNextHeader = *pucPayloadPtr; - pucPayloadPtr+=usNextHeaderOffset; - (*pusPayloadLength)-=usNextHeaderOffset; + pucPayloadPtr += usNextHeaderOffset; + (*pusPayloadLength) -= usNextHeaderOffset; } } - - *ppucPayload = pucPayloadPtr; return pucRetHeaderPtr; } -static UCHAR GetIpv6ProtocolPorts(UCHAR *pucPayload,USHORT *pusSrcPort,USHORT *pusDestPort,USHORT usPayloadLength,UCHAR ucNextHeader) +static UCHAR GetIpv6ProtocolPorts(UCHAR *pucPayload, USHORT *pusSrcPort, + USHORT *pusDestPort, USHORT usPayloadLength, UCHAR ucNextHeader) { UCHAR *pIpv6HdrScanContext = pucPayload; BOOLEAN bDone = FALSE; - UCHAR ucHeaderType =0; + UCHAR ucHeaderType = 0; UCHAR *pucNextHeader = NULL; - PMINI_ADAPTER Adapter = GET_BCM_ADAPTER(gblpnetdev); + PMINI_ADAPTER Adapter = GET_BCM_ADAPTER(gblpnetdev); - if( !pucPayload || (usPayloadLength == 0)) - { + if (!pucPayload || (usPayloadLength == 0)) return 0; - } *pusSrcPort = *pusDestPort = 0; ucHeaderType = ucNextHeader; - while(!bDone) - { - pucNextHeader = GetNextIPV6ChainedHeader(&pIpv6HdrScanContext,&ucHeaderType,&bDone,&usPayloadLength); - if(bDone) - { - if((ucHeaderType==TCP_HEADER_TYPE) || (ucHeaderType == UDP_HEADER_TYPE)) - { - *pusSrcPort=*((PUSHORT)(pucNextHeader)); - *pusDestPort=*((PUSHORT)(pucNextHeader+2)); - BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, " \nProtocol Ports - Src Port :0x%x Dest Port : 0x%x",ntohs(*pusSrcPort),ntohs(*pusDestPort)); + while (!bDone) { + pucNextHeader = GetNextIPV6ChainedHeader(&pIpv6HdrScanContext, + &ucHeaderType, &bDone, &usPayloadLength); + if (bDone) { + if ((ucHeaderType == TCP_HEADER_TYPE) || + (ucHeaderType == UDP_HEADER_TYPE)) { + *pusSrcPort = *((PUSHORT)(pucNextHeader)); + *pusDestPort = *((PUSHORT)(pucNextHeader+2)); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, + DBG_LVL_ALL, + "\nProtocol Ports - Src Port :0x%x Dest Port : 0x%x", + ntohs(*pusSrcPort), + ntohs(*pusDestPort)); } break; @@ -168,92 +176,111 @@ static UCHAR GetIpv6ProtocolPorts(UCHAR *pucPayload,USHORT *pusSrcPort,USHORT *p } - -USHORT IpVersion6(PMINI_ADAPTER Adapter, /**< Pointer to the driver control structure */ - PVOID pcIpHeader, /**<Pointer to the IP Hdr of the packet*/ - S_CLASSIFIER_RULE *pstClassifierRule ) +/* + * Arg 1 PMINI_ADAPTER Adapter is a pointer ot the driver contorl structure + * Arg 2 PVOID pcIpHeader is a pointer to the IP header of the packet + */ +USHORT IpVersion6(PMINI_ADAPTER Adapter, PVOID pcIpHeader, + S_CLASSIFIER_RULE *pstClassifierRule) { USHORT ushDestPort = 0; USHORT ushSrcPort = 0; - UCHAR ucNextProtocolAboveIP =0; + UCHAR ucNextProtocolAboveIP = 0; IPV6Header *pstIpv6Header = NULL; BOOLEAN bClassificationSucceed = FALSE; - BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "IpVersion6 ==========>\n"); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, + DBG_LVL_ALL, "IpVersion6 ==========>\n"); pstIpv6Header = (IPV6Header *)pcIpHeader; DumpIpv6Header(pstIpv6Header); - //Try to get the next higher layer protocol and the Ports Nos if TCP or UDP + /* + * Try to get the next higher layer protocol + * and the Ports Nos if TCP or UDP + */ ucNextProtocolAboveIP = GetIpv6ProtocolPorts((UCHAR *)(pcIpHeader + sizeof(IPV6Header)), &ushSrcPort, &ushDestPort, pstIpv6Header->usPayloadLength, pstIpv6Header->ucNextHeader); - do - { - if(0 == pstClassifierRule->ucDirection) - { - //cannot be processed for classification. - // it is a down link connection + do { + if (pstClassifierRule->ucDirection == 0) { + /* + * cannot be processed for classification. + * it is a down link connection + */ break; } - if(!pstClassifierRule->bIpv6Protocol) - { - //We are looking for Ipv6 Classifiers . Lets ignore this classifier and try the next one. + if (!pstClassifierRule->bIpv6Protocol) { + /* + * We are looking for Ipv6 Classifiers + * Lets ignore this classifier and try the next one + */ break; } - bClassificationSucceed=MatchSrcIpv6Address(pstClassifierRule,pstIpv6Header); - if(!bClassificationSucceed) - break; + bClassificationSucceed = MatchSrcIpv6Address(pstClassifierRule, + pstIpv6Header); + if (!bClassificationSucceed) + break; - bClassificationSucceed=MatchDestIpv6Address(pstClassifierRule,pstIpv6Header); - if(!bClassificationSucceed) - break; + bClassificationSucceed = MatchDestIpv6Address(pstClassifierRule, + pstIpv6Header); + if (!bClassificationSucceed) + break; - //Match the protocol type.For IPv6 the next protocol at end of Chain of IPv6 prot headers - bClassificationSucceed=MatchProtocol(pstClassifierRule,ucNextProtocolAboveIP); - if(!bClassificationSucceed) - break; - BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\nIPv6 Protocol Matched"); + /* + * Match the protocol type. + * For IPv6 the next protocol at end of + * Chain of IPv6 prot headers + */ + bClassificationSucceed = MatchProtocol(pstClassifierRule, + ucNextProtocolAboveIP); + if (!bClassificationSucceed) + break; - if((ucNextProtocolAboveIP == TCP_HEADER_TYPE) || (ucNextProtocolAboveIP == UDP_HEADER_TYPE)) - { - //Match Src Port - BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\nIPv6 Source Port:%x\n",ntohs(ushSrcPort)); - bClassificationSucceed=MatchSrcPort(pstClassifierRule,ntohs(ushSrcPort)); - if(!bClassificationSucceed) + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, + DBG_LVL_ALL, "\nIPv6 Protocol Matched"); + + if ((ucNextProtocolAboveIP == TCP_HEADER_TYPE) || + (ucNextProtocolAboveIP == UDP_HEADER_TYPE)) { + /* Match Src Port */ + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, + DBG_LVL_ALL, "\nIPv6 Source Port:%x\n", + ntohs(ushSrcPort)); + bClassificationSucceed = MatchSrcPort(pstClassifierRule, + ntohs(ushSrcPort)); + if (!bClassificationSucceed) break; - BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\nIPv6 Src Port Matched"); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, + DBG_LVL_ALL, "\nIPv6 Src Port Matched"); - //Match Dest Port - BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\nIPv6 Destination Port:%x\n",ntohs(ushDestPort)); - bClassificationSucceed=MatchDestPort(pstClassifierRule,ntohs(ushDestPort)); - if(!bClassificationSucceed) + /* Match Dest Port */ + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, + DBG_LVL_ALL, "\nIPv6 Destination Port:%x\n", + ntohs(ushDestPort)); + bClassificationSucceed = MatchDestPort(pstClassifierRule, + ntohs(ushDestPort)); + if (!bClassificationSucceed) break; - BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\nIPv6 Dest Port Matched"); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, + DBG_LVL_ALL, "\nIPv6 Dest Port Matched"); } - }while(0); + } while (0); - if(TRUE==bClassificationSucceed) - { + if (bClassificationSucceed == TRUE) { INT iMatchedSFQueueIndex = 0; - iMatchedSFQueueIndex = SearchSfid(Adapter,pstClassifierRule->ulSFID); - if(iMatchedSFQueueIndex >= NO_OF_QUEUES) - { + iMatchedSFQueueIndex = SearchSfid(Adapter, pstClassifierRule->ulSFID); + if (iMatchedSFQueueIndex >= NO_OF_QUEUES) { bClassificationSucceed = FALSE; - } - else - { - if(FALSE == Adapter->PackInfo[iMatchedSFQueueIndex].bActive) - { + } else { + if (Adapter->PackInfo[iMatchedSFQueueIndex].bActive == FALSE) bClassificationSucceed = FALSE; - } } } @@ -261,52 +288,55 @@ USHORT IpVersion6(PMINI_ADAPTER Adapter, /**< Pointer to the driver control stru } -static BOOLEAN MatchSrcIpv6Address(S_CLASSIFIER_RULE *pstClassifierRule,IPV6Header *pstIpv6Header) +static BOOLEAN MatchSrcIpv6Address(S_CLASSIFIER_RULE *pstClassifierRule, + IPV6Header *pstIpv6Header) { - UINT uiLoopIndex=0; - UINT uiIpv6AddIndex=0; - UINT uiIpv6AddrNoLongWords = 4; + UINT uiLoopIndex = 0; + UINT uiIpv6AddIndex = 0; + UINT uiIpv6AddrNoLongWords = 4; ULONG aulSrcIP[4]; - PMINI_ADAPTER Adapter = GET_BCM_ADAPTER(gblpnetdev); + PMINI_ADAPTER Adapter = GET_BCM_ADAPTER(gblpnetdev); /* - //This is the no. of Src Addresses ie Range of IP Addresses contained - //in the classifier rule for which we need to match - */ + * This is the no. of Src Addresses ie Range of IP Addresses contained + * in the classifier rule for which we need to match + */ UINT uiCountIPSrcAddresses = (UINT)pstClassifierRule->ucIPSourceAddressLength; - if(0 == uiCountIPSrcAddresses) + if (uiCountIPSrcAddresses == 0) return TRUE; - //First Convert the Ip Address in the packet to Host Endian order - for(uiIpv6AddIndex=0;uiIpv6AddIndex<uiIpv6AddrNoLongWords;uiIpv6AddIndex++) - { - aulSrcIP[uiIpv6AddIndex]=ntohl(pstIpv6Header->ulSrcIpAddress[uiIpv6AddIndex]); - } + /* First Convert the Ip Address in the packet to Host Endian order */ + for (uiIpv6AddIndex = 0; uiIpv6AddIndex < uiIpv6AddrNoLongWords; uiIpv6AddIndex++) + aulSrcIP[uiIpv6AddIndex] = ntohl(pstIpv6Header->ulSrcIpAddress[uiIpv6AddIndex]); - for(uiLoopIndex=0;uiLoopIndex<uiCountIPSrcAddresses;uiLoopIndex+=uiIpv6AddrNoLongWords) - { - BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\n Src Ipv6 Address In Received Packet : \n "); + for (uiLoopIndex = 0; uiLoopIndex < uiCountIPSrcAddresses; uiLoopIndex += uiIpv6AddrNoLongWords) { + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, + "\n Src Ipv6 Address In Received Packet :\n "); DumpIpv6Address(aulSrcIP); - BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\n Src Ipv6 Mask In Classifier Rule: \n"); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, + "\n Src Ipv6 Mask In Classifier Rule:\n"); DumpIpv6Address(&pstClassifierRule->stSrcIpAddress.ulIpv6Mask[uiLoopIndex]); - BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\n Src Ipv6 Address In Classifier Rule : \n"); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, + "\n Src Ipv6 Address In Classifier Rule :\n"); DumpIpv6Address(&pstClassifierRule->stSrcIpAddress.ulIpv6Addr[uiLoopIndex]); - for(uiIpv6AddIndex=0;uiIpv6AddIndex<uiIpv6AddrNoLongWords;uiIpv6AddIndex++) - { - if((pstClassifierRule->stSrcIpAddress.ulIpv6Mask[uiLoopIndex+uiIpv6AddIndex] & aulSrcIP[uiIpv6AddIndex]) - != pstClassifierRule->stSrcIpAddress.ulIpv6Addr[uiLoopIndex+uiIpv6AddIndex]) - { - //Match failed for current Ipv6 Address.Try next Ipv6 Address + for (uiIpv6AddIndex = 0; uiIpv6AddIndex < uiIpv6AddrNoLongWords; uiIpv6AddIndex++) { + if ((pstClassifierRule->stSrcIpAddress.ulIpv6Mask[uiLoopIndex+uiIpv6AddIndex] & aulSrcIP[uiIpv6AddIndex]) + != pstClassifierRule->stSrcIpAddress.ulIpv6Addr[uiLoopIndex+uiIpv6AddIndex]) { + /* + * Match failed for current Ipv6 Address + * Try next Ipv6 Address + */ break; } - if(uiIpv6AddIndex == uiIpv6AddrNoLongWords-1) - { - //Match Found - BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "Ipv6 Src Ip Address Matched\n"); + if (uiIpv6AddIndex == uiIpv6AddrNoLongWords-1) { + /* Match Found */ + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, + DBG_LVL_ALL, + "Ipv6 Src Ip Address Matched\n"); return TRUE; } } @@ -314,52 +344,56 @@ static BOOLEAN MatchSrcIpv6Address(S_CLASSIFIER_RULE *pstClassifierRule,IPV6Head return FALSE; } -static BOOLEAN MatchDestIpv6Address(S_CLASSIFIER_RULE *pstClassifierRule,IPV6Header *pstIpv6Header) +static BOOLEAN MatchDestIpv6Address(S_CLASSIFIER_RULE *pstClassifierRule, + IPV6Header *pstIpv6Header) { - UINT uiLoopIndex=0; - UINT uiIpv6AddIndex=0; - UINT uiIpv6AddrNoLongWords = 4; + UINT uiLoopIndex = 0; + UINT uiIpv6AddIndex = 0; + UINT uiIpv6AddrNoLongWords = 4; ULONG aulDestIP[4]; - PMINI_ADAPTER Adapter = GET_BCM_ADAPTER(gblpnetdev); + PMINI_ADAPTER Adapter = GET_BCM_ADAPTER(gblpnetdev); /* - //This is the no. of Destination Addresses ie Range of IP Addresses contained - //in the classifier rule for which we need to match - */ + * This is the no. of Destination Addresses + * ie Range of IP Addresses contained in the classifier rule + * for which we need to match + */ UINT uiCountIPDestinationAddresses = (UINT)pstClassifierRule->ucIPDestinationAddressLength; - if(0 == uiCountIPDestinationAddresses) + if (uiCountIPDestinationAddresses == 0) return TRUE; - //First Convert the Ip Address in the packet to Host Endian order - for(uiIpv6AddIndex=0;uiIpv6AddIndex<uiIpv6AddrNoLongWords;uiIpv6AddIndex++) - { - aulDestIP[uiIpv6AddIndex]=ntohl(pstIpv6Header->ulDestIpAddress[uiIpv6AddIndex]); - } + /* First Convert the Ip Address in the packet to Host Endian order */ + for (uiIpv6AddIndex = 0; uiIpv6AddIndex < uiIpv6AddrNoLongWords; uiIpv6AddIndex++) + aulDestIP[uiIpv6AddIndex] = ntohl(pstIpv6Header->ulDestIpAddress[uiIpv6AddIndex]); - for(uiLoopIndex=0;uiLoopIndex<uiCountIPDestinationAddresses;uiLoopIndex+=uiIpv6AddrNoLongWords) - { - BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\n Destination Ipv6 Address In Received Packet : \n "); + for (uiLoopIndex = 0; uiLoopIndex < uiCountIPDestinationAddresses; uiLoopIndex += uiIpv6AddrNoLongWords) { + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, + "\n Destination Ipv6 Address In Received Packet :\n "); DumpIpv6Address(aulDestIP); - BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\n Destination Ipv6 Mask In Classifier Rule: \n"); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, + "\n Destination Ipv6 Mask In Classifier Rule :\n"); DumpIpv6Address(&pstClassifierRule->stDestIpAddress.ulIpv6Mask[uiLoopIndex]); - BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\n Destination Ipv6 Address In Classifier Rule : \n"); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, + "\n Destination Ipv6 Address In Classifier Rule :\n"); DumpIpv6Address(&pstClassifierRule->stDestIpAddress.ulIpv6Addr[uiLoopIndex]); - for(uiIpv6AddIndex=0;uiIpv6AddIndex<uiIpv6AddrNoLongWords;uiIpv6AddIndex++) - { - if((pstClassifierRule->stDestIpAddress.ulIpv6Mask[uiLoopIndex+uiIpv6AddIndex] & aulDestIP[uiIpv6AddIndex]) - != pstClassifierRule->stDestIpAddress.ulIpv6Addr[uiLoopIndex+uiIpv6AddIndex]) - { - //Match failed for current Ipv6 Address.Try next Ipv6 Address + for (uiIpv6AddIndex = 0; uiIpv6AddIndex < uiIpv6AddrNoLongWords; uiIpv6AddIndex++) { + if ((pstClassifierRule->stDestIpAddress.ulIpv6Mask[uiLoopIndex+uiIpv6AddIndex] & aulDestIP[uiIpv6AddIndex]) + != pstClassifierRule->stDestIpAddress.ulIpv6Addr[uiLoopIndex+uiIpv6AddIndex]) { + /* + * Match failed for current Ipv6 Address. + * Try next Ipv6 Address + */ break; } - if(uiIpv6AddIndex == uiIpv6AddrNoLongWords-1) - { - //Match Found - BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "Ipv6 Destination Ip Address Matched\n"); + if (uiIpv6AddIndex == uiIpv6AddrNoLongWords-1) { + /* Match Found */ + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, + DBG_LVL_ALL, + "Ipv6 Destination Ip Address Matched\n"); return TRUE; } } @@ -371,11 +405,11 @@ static BOOLEAN MatchDestIpv6Address(S_CLASSIFIER_RULE *pstClassifierRule,IPV6Hea VOID DumpIpv6Address(ULONG *puIpv6Address) { UINT uiIpv6AddrNoLongWords = 4; - UINT uiIpv6AddIndex=0; - PMINI_ADAPTER Adapter = GET_BCM_ADAPTER(gblpnetdev); - for(uiIpv6AddIndex=0;uiIpv6AddIndex<uiIpv6AddrNoLongWords;uiIpv6AddIndex++) - { - BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, ":%lx",puIpv6Address[uiIpv6AddIndex]); + UINT uiIpv6AddIndex = 0; + PMINI_ADAPTER Adapter = GET_BCM_ADAPTER(gblpnetdev); + for (uiIpv6AddIndex = 0; uiIpv6AddIndex < uiIpv6AddrNoLongWords; uiIpv6AddIndex++) { + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, + ":%lx", puIpv6Address[uiIpv6AddIndex]); } } @@ -383,22 +417,35 @@ VOID DumpIpv6Address(ULONG *puIpv6Address) static VOID DumpIpv6Header(IPV6Header *pstIpv6Header) { UCHAR ucVersion; - UCHAR ucPrio ; - PMINI_ADAPTER Adapter = GET_BCM_ADAPTER(gblpnetdev); - BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "----Ipv6 Header---"); + UCHAR ucPrio; + PMINI_ADAPTER Adapter = GET_BCM_ADAPTER(gblpnetdev); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, + "----Ipv6 Header---"); ucVersion = pstIpv6Header->ucVersionPrio & 0xf0; - BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "Version : %x \n",ucVersion); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, + "Version : %x\n", ucVersion); ucPrio = pstIpv6Header->ucVersionPrio & 0x0f; - BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "Priority : %x \n",ucPrio); - //BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "Flow Label : %x \n",(pstIpv6Header->ucVersionPrio &0xf0); - BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "Payload Length : %x \n",ntohs(pstIpv6Header->usPayloadLength)); - BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "Next Header : %x \n",pstIpv6Header->ucNextHeader); - BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "Hop Limit : %x \n",pstIpv6Header->ucHopLimit); - BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "Src Address :\n"); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, + "Priority : %x\n", ucPrio); + /* + * BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, + * "Flow Label : %x\n",(pstIpv6Header->ucVersionPrio &0xf0); + */ + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, + "Payload Length : %x\n", + ntohs(pstIpv6Header->usPayloadLength)); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, + "Next Header : %x\n", pstIpv6Header->ucNextHeader); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, + "Hop Limit : %x\n", pstIpv6Header->ucHopLimit); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, + "Src Address :\n"); DumpIpv6Address(pstIpv6Header->ulSrcIpAddress); - BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "Dest Address :\n"); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, + "Dest Address :\n"); DumpIpv6Address(pstIpv6Header->ulDestIpAddress); - BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "----Ipv6 Header End---"); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, + "----Ipv6 Header End---"); } diff --git a/drivers/staging/bcm/Misc.c b/drivers/staging/bcm/Misc.c index c7725e141fd..8223a6913fc 100644 --- a/drivers/staging/bcm/Misc.c +++ b/drivers/staging/bcm/Misc.c @@ -835,7 +835,7 @@ int reset_card_proc(PMINI_ADAPTER ps_adapter) Bcm_kill_all_URBs(psIntfAdapter); /* Reset the UMA-B Device */ if (ps_adapter->chip_id >= T3LPB) { - BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Reseting UMA-B\n"); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Resetting UMA-B\n"); retval = usb_reset_device(psIntfAdapter->udev); psIntfAdapter->psAdapter->StopAllXaction = FALSE; diff --git a/drivers/staging/comedi/Kconfig b/drivers/staging/comedi/Kconfig index 12c691d9090..a1cf0b04c16 100644 --- a/drivers/staging/comedi/Kconfig +++ b/drivers/staging/comedi/Kconfig @@ -14,6 +14,26 @@ config COMEDI_DEBUG This is an option for use by developers; most people should say N here. This enables comedi core and driver debugging. +config COMEDI_DEFAULT_BUF_SIZE_KB + int "Comedi default initial asynchronous buffer size in KiB" + default "2048" + depends on COMEDI != n + ---help--- + This is the default asynchronous buffer size which is used for + commands running in the background in kernel space. This + defaults to 2048 KiB of memory so that a 16 channel card + running at 10 kHz has of 2-4 seconds of buffer. + +config COMEDI_DEFAULT_BUF_MAXSIZE_KB + int "Comedi default maximum asynchronous buffer size in KiB" + default "20480" + depends on COMEDI != n + ---help--- + This is the default maximum asynchronous buffer size which can + be requested by a userspace program without root privileges. + This is set to 20480 KiB so that a fast I/O card with 16 + channels running at 100 kHz has 2-4 seconds of buffer. + menuconfig COMEDI_MISC_DRIVERS tristate "Comedi misc drivers" depends on COMEDI @@ -211,6 +231,38 @@ config COMEDI_PCM3730 To compile this driver as a module, choose M here: the module will be called pcm3730. +config COMEDI_AMPLC_DIO200_ISA + tristate "Amplicon PC212E/PC214E/PC215E/PC218E/PC272E" + select COMEDI_AMPLC_DIO200 + depends on COMEDI_ISA_DRIVERS + default N + ---help--- + Enable support for Amplicon PC212E, PC214E, PC215E, PC218E and + PC272E ISA DIO boards + + To compile this driver as a module, choose M here: the module will be + called amplc_dio200. + +config COMEDI_AMPLC_PC236_ISA + tristate "Amplicon PC36AT DIO board support" + select COMEDI_AMPLC_PC236 + default N + ---help--- + Enable support for Amplicon PC36AT ISA DIO board. + + To compile this driver as a module, choose M here: the module will be + called amplc_pc236. + +config COMEDI_AMPLC_PC263_ISA + tristate "Amplicon PC263 relay board support" + select COMEDI_AMPLC_PC263 + default N + ---help--- + Enable support for Amplicon PC263 ISA relay board. + + To compile this driver as a module, choose M here: the module will be + called amplc_pc263. + config COMEDI_RTI800 tristate "Analog Devices RTI-800/815 ISA card support" default N @@ -240,6 +292,20 @@ config COMEDI_DAS16M1 To compile this driver as a module, choose M here: the module will be called das16m1. +config COMEDI_DAS08_ISA + tristate "DAS-08 compatible ISA and PC/104 card support" + select COMEDI_DAS08 + default N + ---help--- + Enable support for Keithley Metrabyte/ComputerBoards DAS08 + and compatible ISA and PC/104 cards: + Keithley Metrabyte/ComputerBoards DAS08, DAS08-PGM, DAS08-PGH, + DAS08-PGL, DAS08-AOH, DAS08-AOL, DAS08-AOM, DAS08/JR-AO, + DAS08/JR-16-AO, PC104-DAS08, DAS08/JR/16. + + To compile this driver as a module, choose M here: the module will be + called das08. + config COMEDI_DAS16 tristate "DAS-16 compatible ISA and PC/104 card support" select COMEDI_8255 @@ -772,31 +838,32 @@ config COMEDI_ADV_PCI_DIO To compile this driver as a module, choose M here: the module will be called adv_pci_dio. -config COMEDI_AMPLC_DIO200 - tristate "Amplicon PC272E and PCI272 DIO board support" - select COMEDI_8255 +config COMEDI_AMPLC_DIO200_PCI + tristate "Amplicon PCI215 and PCI272 DIO board support" + select COMEDI_AMPLC_DIO200 default N ---help--- - Enable support for Amplicon PC272E and PCI272 DIO boards + Enable support for Amplicon PCI215 and PCI272 DIO boards. To compile this driver as a module, choose M here: the module will be called amplc_dio200. -config COMEDI_AMPLC_PC236 - tristate "Amplicon PC36AT and PCI236 DIO board support" - select COMEDI_8255 +config COMEDI_AMPLC_PC236_PCI + tristate "Amplicon PCI236 DIO board support" + select COMEDI_AMPLC_PC236 default N ---help--- - Enable support for Amplicon PC36AT and PCI236 DIO boards + Enable support for Amplicon PCI236 DIO board. To compile this driver as a module, choose M here: the module will be called amplc_pc236. -config COMEDI_AMPLC_PC263 - tristate "Amplicon PC263 and PCI263 relay board support" +config COMEDI_AMPLC_PC263_PCI + tristate "Amplicon PCI263 relay board support" + select COMEDI_AMPLC_PC263 default N ---help--- - Enable support for Amplicon PC263 and PCI263 relay boards + Enable support for Amplicon PCI263 relay board. To compile this driver as a module, choose M here: the module will be called amplc_pc263. @@ -831,6 +898,16 @@ config COMEDI_CONTEC_PCI_DIO To compile this driver as a module, choose M here: the module will be called contec_pci_dio. +config COMEDI_DAS08_PCI + tristate "DAS-08 PCI support" + select COMEDI_DAS08 + default N + ---help--- + Enable support for PCI DAS-08 cards. + + To compile this driver as a module, choose M here: the module will be + called das08. + config COMEDI_DT3000 tristate "Data Translation DT3000 series support" default N @@ -1357,20 +1434,6 @@ config COMEDI_8255 To compile this driver as a module, choose M here: the module will be called 8255. -config COMEDI_DAS08 - tristate "DAS-08 compatible support" - depends on COMEDI - select COMEDI_8255 - default N - ---help--- - Enable support for DAS08 and compatible ISA, PC/104 and PCI cards. - - Note that PCMCIA DAS08 cards are not directly supported by this - driver, and need a separate driver as a wrapper. - - To compile this driver as a module, choose M here: the module will be - called das08. - config COMEDI_FC tristate "Comedi shared functions for low-level driver support" depends on COMEDI @@ -1382,3 +1445,22 @@ config COMEDI_FC To compile this driver as a module, choose M here: the module will be called comedi_fc. + +config COMEDI_AMPLC_DIO200 + def_tristate N + depends on COMEDI + select COMEDI_8255 + +config COMEDI_AMPLC_PC236 + def_tristate N + depends on COMEDI + select COMEDI_8255 + +config COMEDI_AMPLC_PC263 + def_tristate N + depends on COMEDI + +config COMEDI_DAS08 + def_tristate N + depends on COMEDI + select COMEDI_8255 diff --git a/drivers/staging/comedi/comedi.h b/drivers/staging/comedi/comedi.h index 14ea35ac015..8ea55aef10a 100644 --- a/drivers/staging/comedi/comedi.h +++ b/drivers/staging/comedi/comedi.h @@ -465,7 +465,7 @@ /* only relevant to kernel modules. */ #define COMEDI_CB_EOS 1 /* end of scan */ -#define COMEDI_CB_EOA 2 /* end of acquisition */ +#define COMEDI_CB_EOA 2 /* end of acquisition/output */ #define COMEDI_CB_BLOCK 4 /* data has arrived: * wakes up read() / write() */ #define COMEDI_CB_EOBUF 8 /* DEPRECATED: end of buffer */ diff --git a/drivers/staging/comedi/comedi_fops.c b/drivers/staging/comedi/comedi_fops.c index 9bcf87ae4c0..06fc6569c85 100644 --- a/drivers/staging/comedi/comedi_fops.c +++ b/drivers/staging/comedi/comedi_fops.c @@ -58,14 +58,35 @@ MODULE_LICENSE("GPL"); #ifdef CONFIG_COMEDI_DEBUG int comedi_debug; EXPORT_SYMBOL(comedi_debug); -module_param(comedi_debug, int, 0644); +module_param(comedi_debug, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(comedi_debug, + "enable comedi core and driver debugging if non-zero (default 0)" + ); #endif bool comedi_autoconfig = 1; -module_param(comedi_autoconfig, bool, 0444); +module_param(comedi_autoconfig, bool, S_IRUGO); +MODULE_PARM_DESC(comedi_autoconfig, + "enable drivers to auto-configure comedi devices (default 1)"); static int comedi_num_legacy_minors; -module_param(comedi_num_legacy_minors, int, 0444); +module_param(comedi_num_legacy_minors, int, S_IRUGO); +MODULE_PARM_DESC(comedi_num_legacy_minors, + "number of comedi minor devices to reserve for non-auto-configured devices (default 0)" + ); + +unsigned int comedi_default_buf_size_kb = CONFIG_COMEDI_DEFAULT_BUF_SIZE_KB; +module_param(comedi_default_buf_size_kb, uint, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(comedi_default_buf_size_kb, + "default asynchronous buffer size in KiB (default " + __MODULE_STRING(CONFIG_COMEDI_DEFAULT_BUF_SIZE_KB) ")"); + +unsigned int comedi_default_buf_maxsize_kb + = CONFIG_COMEDI_DEFAULT_BUF_MAXSIZE_KB; +module_param(comedi_default_buf_maxsize_kb, uint, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(comedi_default_buf_maxsize_kb, + "default maximum size of asynchronous buffer in KiB (default " + __MODULE_STRING(CONFIG_COMEDI_DEFAULT_BUF_MAXSIZE_KB) ")"); static DEFINE_SPINLOCK(comedi_file_info_table_lock); static struct comedi_device_file_info @@ -280,7 +301,7 @@ static int do_devconfig_ioctl(struct comedi_device *dev, if (ret == 0) { if (!try_module_get(dev->driver->module)) { comedi_device_detach(dev); - return -ENOSYS; + ret = -ENOSYS; } } @@ -1545,7 +1566,7 @@ done: return retval; } -static unsigned int comedi_poll(struct file *file, poll_table * wait) +static unsigned int comedi_poll(struct file *file, poll_table *wait) { unsigned int mask = 0; const unsigned minor = iminor(file->f_dentry->d_inode); @@ -2192,7 +2213,6 @@ static void comedi_device_cleanup(struct comedi_device *dev) int comedi_alloc_board_minor(struct device *hardware_device) { - unsigned long flags; struct comedi_device_file_info *info; struct device *csdev; unsigned i; @@ -2206,15 +2226,16 @@ int comedi_alloc_board_minor(struct device *hardware_device) kfree(info); return -ENOMEM; } + info->hardware_device = hardware_device; comedi_device_init(info->device); - spin_lock_irqsave(&comedi_file_info_table_lock, flags); + spin_lock(&comedi_file_info_table_lock); for (i = 0; i < COMEDI_NUM_BOARD_MINORS; ++i) { if (comedi_file_info_table[i] == NULL) { comedi_file_info_table[i] = info; break; } } - spin_unlock_irqrestore(&comedi_file_info_table_lock, flags); + spin_unlock(&comedi_file_info_table_lock); if (i == COMEDI_NUM_BOARD_MINORS) { comedi_device_cleanup(info->device); kfree(info->device); @@ -2271,14 +2292,13 @@ int comedi_alloc_board_minor(struct device *hardware_device) void comedi_free_board_minor(unsigned minor) { - unsigned long flags; struct comedi_device_file_info *info; BUG_ON(minor >= COMEDI_NUM_BOARD_MINORS); - spin_lock_irqsave(&comedi_file_info_table_lock, flags); + spin_lock(&comedi_file_info_table_lock); info = comedi_file_info_table[minor]; comedi_file_info_table[minor] = NULL; - spin_unlock_irqrestore(&comedi_file_info_table_lock, flags); + spin_unlock(&comedi_file_info_table_lock); if (info) { struct comedi_device *dev = info->device; @@ -2294,10 +2314,26 @@ void comedi_free_board_minor(unsigned minor) } } +int comedi_find_board_minor(struct device *hardware_device) +{ + int minor; + struct comedi_device_file_info *info; + + for (minor = 0; minor < COMEDI_NUM_BOARD_MINORS; minor++) { + spin_lock(&comedi_file_info_table_lock); + info = comedi_file_info_table[minor]; + if (info && info->hardware_device == hardware_device) { + spin_unlock(&comedi_file_info_table_lock); + return minor; + } + spin_unlock(&comedi_file_info_table_lock); + } + return -ENODEV; +} + int comedi_alloc_subdevice_minor(struct comedi_device *dev, struct comedi_subdevice *s) { - unsigned long flags; struct comedi_device_file_info *info; struct device *csdev; unsigned i; @@ -2309,14 +2345,14 @@ int comedi_alloc_subdevice_minor(struct comedi_device *dev, info->device = dev; info->read_subdevice = s; info->write_subdevice = s; - spin_lock_irqsave(&comedi_file_info_table_lock, flags); + spin_lock(&comedi_file_info_table_lock); for (i = COMEDI_FIRST_SUBDEVICE_MINOR; i < COMEDI_NUM_MINORS; ++i) { if (comedi_file_info_table[i] == NULL) { comedi_file_info_table[i] = info; break; } } - spin_unlock_irqrestore(&comedi_file_info_table_lock, flags); + spin_unlock(&comedi_file_info_table_lock); if (i == COMEDI_NUM_MINORS) { kfree(info); printk(KERN_ERR @@ -2372,7 +2408,6 @@ int comedi_alloc_subdevice_minor(struct comedi_device *dev, void comedi_free_subdevice_minor(struct comedi_subdevice *s) { - unsigned long flags; struct comedi_device_file_info *info; if (s == NULL) @@ -2383,10 +2418,10 @@ void comedi_free_subdevice_minor(struct comedi_subdevice *s) BUG_ON(s->minor >= COMEDI_NUM_MINORS); BUG_ON(s->minor < COMEDI_FIRST_SUBDEVICE_MINOR); - spin_lock_irqsave(&comedi_file_info_table_lock, flags); + spin_lock(&comedi_file_info_table_lock); info = comedi_file_info_table[s->minor]; comedi_file_info_table[s->minor] = NULL; - spin_unlock_irqrestore(&comedi_file_info_table_lock, flags); + spin_unlock(&comedi_file_info_table_lock); if (s->class_dev) { device_destroy(comedi_class, MKDEV(COMEDI_MAJOR, s->minor)); @@ -2397,13 +2432,12 @@ void comedi_free_subdevice_minor(struct comedi_subdevice *s) struct comedi_device_file_info *comedi_get_device_file_info(unsigned minor) { - unsigned long flags; struct comedi_device_file_info *info; BUG_ON(minor >= COMEDI_NUM_MINORS); - spin_lock_irqsave(&comedi_file_info_table_lock, flags); + spin_lock(&comedi_file_info_table_lock); info = comedi_file_info_table[minor]; - spin_unlock_irqrestore(&comedi_file_info_table_lock, flags); + spin_unlock(&comedi_file_info_table_lock); return info; } EXPORT_SYMBOL_GPL(comedi_get_device_file_info); diff --git a/drivers/staging/comedi/comedidev.h b/drivers/staging/comedi/comedidev.h index 7a0d4bcbc35..02e4ae0643a 100644 --- a/drivers/staging/comedi/comedidev.h +++ b/drivers/staging/comedi/comedidev.h @@ -180,6 +180,9 @@ struct comedi_async { unsigned int x); }; +struct pci_dev; +struct usb_interface; + struct comedi_driver { struct comedi_driver *next; @@ -187,6 +190,8 @@ struct comedi_driver { struct module *module; int (*attach) (struct comedi_device *, struct comedi_devconfig *); int (*detach) (struct comedi_device *); + int (*attach_pci) (struct comedi_device *, struct pci_dev *); + int (*attach_usb) (struct comedi_device *, struct usb_interface *); /* number of elements in board_name and board_id arrays */ unsigned int num_names; @@ -230,10 +235,16 @@ struct comedi_device { void (*close) (struct comedi_device *dev); }; +static inline const void *comedi_board(struct comedi_device *dev) +{ + return dev->board_ptr; +} + struct comedi_device_file_info { struct comedi_device *device; struct comedi_subdevice *read_subdevice; struct comedi_subdevice *write_subdevice; + struct device *hardware_device; }; #ifdef CONFIG_COMEDI_DEBUG @@ -456,11 +467,12 @@ static inline void *comedi_aux_data(int options[], int n) int comedi_alloc_subdevice_minor(struct comedi_device *dev, struct comedi_subdevice *s); void comedi_free_subdevice_minor(struct comedi_subdevice *s); -int comedi_pci_auto_config(struct pci_dev *pcidev, const char *board_name); +int comedi_pci_auto_config(struct pci_dev *pcidev, + struct comedi_driver *driver); void comedi_pci_auto_unconfig(struct pci_dev *pcidev); -struct usb_device; /* forward declaration */ -int comedi_usb_auto_config(struct usb_device *usbdev, const char *board_name); -void comedi_usb_auto_unconfig(struct usb_device *usbdev); +int comedi_usb_auto_config(struct usb_interface *intf, + struct comedi_driver *driver); +void comedi_usb_auto_unconfig(struct usb_interface *intf); #ifdef CONFIG_COMEDI_PCI_DRIVERS #define CONFIG_COMEDI_PCI diff --git a/drivers/staging/comedi/drivers.c b/drivers/staging/comedi/drivers.c index bf185e2807d..49681a1a6fa 100644 --- a/drivers/staging/comedi/drivers.c +++ b/drivers/staging/comedi/drivers.c @@ -106,6 +106,26 @@ void comedi_device_detach(struct comedi_device *dev) __comedi_device_detach(dev); } +/* do a little post-config cleanup */ +/* called with module refcount incremented, decrements it */ +static int comedi_device_postconfig(struct comedi_device *dev) +{ + int ret = postconfig(dev); + module_put(dev->driver->module); + if (ret < 0) { + __comedi_device_detach(dev); + return ret; + } + if (!dev->board_name) { + printk(KERN_WARNING "BUG: dev->board_name=<%p>\n", + dev->board_name); + dev->board_name = "BUG"; + } + smp_wmb(); + dev->attached = 1; + return 0; +} + int comedi_device_attach(struct comedi_device *dev, struct comedi_devconfig *it) { struct comedi_driver *driv; @@ -121,59 +141,36 @@ int comedi_device_attach(struct comedi_device *dev, struct comedi_devconfig *it) } if (driv->num_names) { dev->board_ptr = comedi_recognize(driv, it->board_name); - if (dev->board_ptr == NULL) { - module_put(driv->module); - continue; - } - } else { - if (strcmp(driv->driver_name, it->board_name)) { - module_put(driv->module); + if (dev->board_ptr) + break; + } else if (strcmp(driv->driver_name, it->board_name)) + break; + module_put(driv->module); + } + if (driv == NULL) { + /* recognize has failed if we get here */ + /* report valid board names before returning error */ + for (driv = comedi_drivers; driv; driv = driv->next) { + if (!try_module_get(driv->module)) { + printk(KERN_INFO + "comedi: failed to increment module count\n"); continue; } + comedi_report_boards(driv); + module_put(driv->module); } - /* initialize dev->driver here so - * comedi_error() can be called from attach */ - dev->driver = driv; - ret = driv->attach(dev, it); - if (ret < 0) { - module_put(dev->driver->module); - __comedi_device_detach(dev); - return ret; - } - goto attached; - } - - /* recognize has failed if we get here */ - /* report valid board names before returning error */ - for (driv = comedi_drivers; driv; driv = driv->next) { - if (!try_module_get(driv->module)) { - printk(KERN_INFO - "comedi: failed to increment module count\n"); - continue; - } - comedi_report_boards(driv); - module_put(driv->module); + return -EIO; } - return -EIO; - -attached: - /* do a little post-config cleanup */ - ret = postconfig(dev); - module_put(dev->driver->module); + /* initialize dev->driver here so + * comedi_error() can be called from attach */ + dev->driver = driv; + ret = driv->attach(dev, it); if (ret < 0) { + module_put(dev->driver->module); __comedi_device_detach(dev); return ret; } - - if (!dev->board_name) { - printk(KERN_WARNING "BUG: dev->board_name=<%p>\n", - dev->board_name); - dev->board_name = "BUG"; - } - smp_wmb(); - dev->attached = 1; - - return 0; + return comedi_device_postconfig(dev); } int comedi_driver_register(struct comedi_driver *driver) @@ -242,6 +239,8 @@ static int postconfig(struct comedi_device *dev) s->len_chanlist = 1; if (s->do_cmd) { + unsigned int buf_size; + BUG_ON((s->subdev_flags & (SDF_CMD_READ | SDF_CMD_WRITE)) == 0); BUG_ON(!s->do_cmdtest); @@ -257,19 +256,20 @@ static int postconfig(struct comedi_device *dev) async->subdevice = s; s->async = async; -#define DEFAULT_BUF_MAXSIZE (64*1024) -#define DEFAULT_BUF_SIZE (64*1024) - - async->max_bufsize = DEFAULT_BUF_MAXSIZE; + async->max_bufsize = + comedi_default_buf_maxsize_kb * 1024; + buf_size = comedi_default_buf_size_kb * 1024; + if (buf_size > async->max_bufsize) + buf_size = async->max_bufsize; async->prealloc_buf = NULL; async->prealloc_bufsz = 0; - if (comedi_buf_alloc(dev, s, DEFAULT_BUF_SIZE) < 0) { + if (comedi_buf_alloc(dev, s, buf_size) < 0) { printk(KERN_INFO "Buffer allocation failed\n"); return -ENOMEM; } if (s->buf_change) { - ret = s->buf_change(dev, s, DEFAULT_BUF_SIZE); + ret = s->buf_change(dev, s, buf_size); if (ret < 0) return ret; } @@ -814,67 +814,102 @@ void comedi_reset_async_buf(struct comedi_async *async) async->events = 0; } -static int comedi_auto_config(struct device *hardware_device, - const char *board_name, const int *options, - unsigned num_options) +static int +comedi_auto_config_helper(struct device *hardware_device, + struct comedi_driver *driver, + int (*attach_wrapper) (struct comedi_device *, + void *), void *context) { - struct comedi_devconfig it; int minor; struct comedi_device_file_info *dev_file_info; - int retval; - unsigned *private_data = NULL; + struct comedi_device *comedi_dev; + int ret; - if (!comedi_autoconfig) { - dev_set_drvdata(hardware_device, NULL); + if (!comedi_autoconfig) return 0; - } minor = comedi_alloc_board_minor(hardware_device); if (minor < 0) return minor; - private_data = kmalloc(sizeof(unsigned), GFP_KERNEL); - if (private_data == NULL) { - retval = -ENOMEM; - goto cleanup; + dev_file_info = comedi_get_device_file_info(minor); + comedi_dev = dev_file_info->device; + + mutex_lock(&comedi_dev->mutex); + if (comedi_dev->attached) + ret = -EBUSY; + else if (!try_module_get(driver->module)) { + printk(KERN_INFO "comedi: failed to increment module count\n"); + ret = -EIO; + } else { + /* set comedi_dev->driver here for attach wrapper */ + comedi_dev->driver = driver; + ret = (*attach_wrapper)(comedi_dev, context); + if (ret < 0) { + module_put(driver->module); + __comedi_device_detach(comedi_dev); + } else { + ret = comedi_device_postconfig(comedi_dev); + } + } + mutex_unlock(&comedi_dev->mutex); + + if (ret < 0) + comedi_free_board_minor(minor); + return ret; +} + +static int comedi_auto_config_wrapper(struct comedi_device *dev, void *context) +{ + struct comedi_devconfig *it = context; + struct comedi_driver *driv = dev->driver; + + if (driv->num_names) { + /* look for generic board entry matching driver name, which + * has already been copied to it->board_name */ + dev->board_ptr = comedi_recognize(driv, it->board_name); + if (dev->board_ptr == NULL) { + printk(KERN_WARNING + "comedi: auto config failed to find board entry" + " '%s' for driver '%s'\n", it->board_name, + driv->driver_name); + comedi_report_boards(driv); + return -EINVAL; + } } - *private_data = minor; - dev_set_drvdata(hardware_device, private_data); + return driv->attach(dev, it); +} - dev_file_info = comedi_get_device_file_info(minor); +static int comedi_auto_config(struct device *hardware_device, + struct comedi_driver *driver, const int *options, + unsigned num_options) +{ + struct comedi_devconfig it; memset(&it, 0, sizeof(it)); - strncpy(it.board_name, board_name, COMEDI_NAMELEN); + strncpy(it.board_name, driver->driver_name, COMEDI_NAMELEN); it.board_name[COMEDI_NAMELEN - 1] = '\0'; BUG_ON(num_options > COMEDI_NDEVCONFOPTS); memcpy(it.options, options, num_options * sizeof(int)); - - mutex_lock(&dev_file_info->device->mutex); - retval = comedi_device_attach(dev_file_info->device, &it); - mutex_unlock(&dev_file_info->device->mutex); - -cleanup: - if (retval < 0) { - kfree(private_data); - comedi_free_board_minor(minor); - } - return retval; + return comedi_auto_config_helper(hardware_device, driver, + comedi_auto_config_wrapper, &it); } static void comedi_auto_unconfig(struct device *hardware_device) { - unsigned *minor = (unsigned *)dev_get_drvdata(hardware_device); - if (minor == NULL) - return; - - BUG_ON(*minor >= COMEDI_NUM_BOARD_MINORS); + int minor; - comedi_free_board_minor(*minor); - dev_set_drvdata(hardware_device, NULL); - kfree(minor); + if (hardware_device == NULL) + return; + minor = comedi_find_board_minor(hardware_device); + if (minor < 0) + return; + BUG_ON(minor >= COMEDI_NUM_BOARD_MINORS); + comedi_free_board_minor(minor); } -int comedi_pci_auto_config(struct pci_dev *pcidev, const char *board_name) +static int comedi_old_pci_auto_config(struct pci_dev *pcidev, + struct comedi_driver *driver) { int options[2]; @@ -883,9 +918,30 @@ int comedi_pci_auto_config(struct pci_dev *pcidev, const char *board_name) /* pci slot */ options[1] = PCI_SLOT(pcidev->devfn); - return comedi_auto_config(&pcidev->dev, board_name, + return comedi_auto_config(&pcidev->dev, driver, options, ARRAY_SIZE(options)); } + +static int comedi_pci_attach_wrapper(struct comedi_device *dev, void *pcidev) +{ + return dev->driver->attach_pci(dev, pcidev); +} + +static int comedi_new_pci_auto_config(struct pci_dev *pcidev, + struct comedi_driver *driver) +{ + return comedi_auto_config_helper(&pcidev->dev, driver, + comedi_pci_attach_wrapper, pcidev); +} + +int comedi_pci_auto_config(struct pci_dev *pcidev, struct comedi_driver *driver) +{ + + if (driver->attach_pci) + return comedi_new_pci_auto_config(pcidev, driver); + else + return comedi_old_pci_auto_config(pcidev, driver); +} EXPORT_SYMBOL_GPL(comedi_pci_auto_config); void comedi_pci_auto_unconfig(struct pci_dev *pcidev) @@ -894,16 +950,38 @@ void comedi_pci_auto_unconfig(struct pci_dev *pcidev) } EXPORT_SYMBOL_GPL(comedi_pci_auto_unconfig); -int comedi_usb_auto_config(struct usb_device *usbdev, const char *board_name) +static int comedi_old_usb_auto_config(struct usb_interface *intf, + struct comedi_driver *driver) { - BUG_ON(usbdev == NULL); - return comedi_auto_config(&usbdev->dev, board_name, NULL, 0); + return comedi_auto_config(&intf->dev, driver, NULL, 0); +} + +static int comedi_usb_attach_wrapper(struct comedi_device *dev, void *intf) +{ + return dev->driver->attach_usb(dev, intf); +} + +static int comedi_new_usb_auto_config(struct usb_interface *intf, + struct comedi_driver *driver) +{ + return comedi_auto_config_helper(&intf->dev, driver, + comedi_usb_attach_wrapper, intf); +} + +int comedi_usb_auto_config(struct usb_interface *intf, + struct comedi_driver *driver) +{ + BUG_ON(intf == NULL); + if (driver->attach_usb) + return comedi_new_usb_auto_config(intf, driver); + else + return comedi_old_usb_auto_config(intf, driver); } EXPORT_SYMBOL_GPL(comedi_usb_auto_config); -void comedi_usb_auto_unconfig(struct usb_device *usbdev) +void comedi_usb_auto_unconfig(struct usb_interface *intf) { - BUG_ON(usbdev == NULL); - comedi_auto_unconfig(&usbdev->dev); + BUG_ON(intf == NULL); + comedi_auto_unconfig(&intf->dev); } EXPORT_SYMBOL_GPL(comedi_usb_auto_unconfig); diff --git a/drivers/staging/comedi/drivers/8255.c b/drivers/staging/comedi/drivers/8255.c index 6c26ac887ee..ed803976b74 100644 --- a/drivers/staging/comedi/drivers/8255.c +++ b/drivers/staging/comedi/drivers/8255.c @@ -107,31 +107,6 @@ struct subdev_8255_struct { #define CALLBACK_FUNC (((struct subdev_8255_struct *)s->private)->cb_func) #define subdevpriv ((struct subdev_8255_struct *)s->private) -static int dev_8255_attach(struct comedi_device *dev, - struct comedi_devconfig *it); -static int dev_8255_detach(struct comedi_device *dev); -static struct comedi_driver driver_8255 = { - .driver_name = "8255", - .module = THIS_MODULE, - .attach = dev_8255_attach, - .detach = dev_8255_detach, -}; - -static int __init driver_8255_init_module(void) -{ - return comedi_driver_register(&driver_8255); -} - -static void __exit driver_8255_cleanup_module(void) -{ - comedi_driver_unregister(&driver_8255); -} - -module_init(driver_8255_init_module); -module_exit(driver_8255_cleanup_module); - -static void do_config(struct comedi_device *dev, struct comedi_subdevice *s); - void subdev_8255_interrupt(struct comedi_device *dev, struct comedi_subdevice *s) { @@ -185,6 +160,23 @@ static int subdev_8255_insn(struct comedi_device *dev, return 2; } +static void do_config(struct comedi_device *dev, struct comedi_subdevice *s) +{ + int config; + + config = CR_CW; + /* 1 in io_bits indicates output, 1 in config indicates input */ + if (!(s->io_bits & 0x0000ff)) + config |= CR_A_IO; + if (!(s->io_bits & 0x00ff00)) + config |= CR_B_IO; + if (!(s->io_bits & 0x0f0000)) + config |= CR_C_LO_IO; + if (!(s->io_bits & 0xf00000)) + config |= CR_C_HI_IO; + CALLBACK_FUNC(1, _8255_CR, config, CALLBACK_ARG); +} + static int subdev_8255_insn_config(struct comedi_device *dev, struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data) @@ -222,23 +214,6 @@ static int subdev_8255_insn_config(struct comedi_device *dev, return 1; } -static void do_config(struct comedi_device *dev, struct comedi_subdevice *s) -{ - int config; - - config = CR_CW; - /* 1 in io_bits indicates output, 1 in config indicates input */ - if (!(s->io_bits & 0x0000ff)) - config |= CR_A_IO; - if (!(s->io_bits & 0x00ff00)) - config |= CR_B_IO; - if (!(s->io_bits & 0x0f0000)) - config |= CR_C_LO_IO; - if (!(s->io_bits & 0xf00000)) - config |= CR_C_HI_IO; - CALLBACK_FUNC(1, _8255_CR, config, CALLBACK_ARG); -} - static int subdev_8255_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s, struct comedi_cmd *cmd) @@ -462,6 +437,25 @@ static int dev_8255_detach(struct comedi_device *dev) return 0; } +static struct comedi_driver driver_8255 = { + .driver_name = "8255", + .module = THIS_MODULE, + .attach = dev_8255_attach, + .detach = dev_8255_detach, +}; + +static int __init driver_8255_init_module(void) +{ + return comedi_driver_register(&driver_8255); +} +module_init(driver_8255_init_module); + +static void __exit driver_8255_cleanup_module(void) +{ + comedi_driver_unregister(&driver_8255); +} +module_exit(driver_8255_cleanup_module); + MODULE_AUTHOR("Comedi http://www.comedi.org"); MODULE_DESCRIPTION("Comedi low-level driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/staging/comedi/drivers/acl7225b.c b/drivers/staging/comedi/drivers/acl7225b.c index 9def2250bb8..ef685fc49b4 100644 --- a/drivers/staging/comedi/drivers/acl7225b.c +++ b/drivers/staging/comedi/drivers/acl7225b.c @@ -22,46 +22,13 @@ Devices: [Adlink] ACL-7225b (acl7225b), [ICP] P16R16DIO (p16r16dio) #define ACL7225_DI_LO 2 /* Digital input low byte (DI0-DI7) */ #define ACL7225_DI_HI 3 /* Digital input high byte (DI8-DI15) */ -static int acl7225b_attach(struct comedi_device *dev, - struct comedi_devconfig *it); -static int acl7225b_detach(struct comedi_device *dev); - struct boardtype { const char *name; /* driver name */ int io_range; /* len of I/O space */ }; -static const struct boardtype boardtypes[] = { - {"acl7225b", ACL7225_SIZE,}, - {"p16r16dio", P16R16DIO_SIZE,}, -}; - -#define n_boardtypes (sizeof(boardtypes)/sizeof(struct boardtype)) #define this_board ((const struct boardtype *)dev->board_ptr) -static struct comedi_driver driver_acl7225b = { - .driver_name = "acl7225b", - .module = THIS_MODULE, - .attach = acl7225b_attach, - .detach = acl7225b_detach, - .board_name = &boardtypes[0].name, - .num_names = n_boardtypes, - .offset = sizeof(struct boardtype), -}; - -static int __init driver_acl7225b_init_module(void) -{ - return comedi_driver_register(&driver_acl7225b); -} - -static void __exit driver_acl7225b_cleanup_module(void) -{ - comedi_driver_unregister(&driver_acl7225b); -} - -module_init(driver_acl7225b_init_module); -module_exit(driver_acl7225b_cleanup_module); - static int acl7225b_do_insn(struct comedi_device *dev, struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data) @@ -162,6 +129,33 @@ static int acl7225b_detach(struct comedi_device *dev) return 0; } +static const struct boardtype boardtypes[] = { + { "acl7225b", ACL7225_SIZE, }, + { "p16r16dio", P16R16DIO_SIZE, }, +}; + +static struct comedi_driver driver_acl7225b = { + .driver_name = "acl7225b", + .module = THIS_MODULE, + .attach = acl7225b_attach, + .detach = acl7225b_detach, + .board_name = &boardtypes[0].name, + .num_names = ARRAY_SIZE(boardtypes), + .offset = sizeof(struct boardtype), +}; + +static int __init driver_acl7225b_init_module(void) +{ + return comedi_driver_register(&driver_acl7225b); +} +module_init(driver_acl7225b_init_module); + +static void __exit driver_acl7225b_cleanup_module(void) +{ + comedi_driver_unregister(&driver_acl7225b); +} +module_exit(driver_acl7225b_cleanup_module); + MODULE_AUTHOR("Comedi http://www.comedi.org"); MODULE_DESCRIPTION("Comedi low-level driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/staging/comedi/drivers/addi-data/addi_common.c b/drivers/staging/comedi/drivers/addi-data/addi_common.c index ca5bd9b8704..5b5dae4cedd 100644 --- a/drivers/staging/comedi/drivers/addi-data/addi_common.c +++ b/drivers/staging/comedi/drivers/addi-data/addi_common.c @@ -2528,14 +2528,12 @@ static const struct addi_board boardtypes[] = { #endif }; -#define n_boardtypes (sizeof(boardtypes)/sizeof(struct addi_board)) - static struct comedi_driver driver_addi = { .driver_name = ADDIDATA_DRIVER_NAME, .module = THIS_MODULE, .attach = i_ADDI_Attach, .detach = i_ADDI_Detach, - .num_names = n_boardtypes, + .num_names = ARRAY_SIZE(boardtypes), .board_name = &boardtypes[0].pc_DriverName, .offset = sizeof(struct addi_board), }; @@ -2543,7 +2541,7 @@ static struct comedi_driver driver_addi = { static int __devinit driver_addi_pci_probe(struct pci_dev *dev, const struct pci_device_id *ent) { - return comedi_pci_auto_config(dev, driver_addi.driver_name); + return comedi_pci_auto_config(dev, &driver_addi); } static void __devexit driver_addi_pci_remove(struct pci_dev *dev) diff --git a/drivers/staging/comedi/drivers/adl_pci6208.c b/drivers/staging/comedi/drivers/adl_pci6208.c index 4fc9e852021..889d1476421 100644 --- a/drivers/staging/comedi/drivers/adl_pci6208.c +++ b/drivers/staging/comedi/drivers/adl_pci6208.c @@ -85,17 +85,6 @@ static const struct pci6208_board pci6208_boards[] = { } }; -/* This is used by modprobe to translate PCI IDs to drivers. Should - * only be used for PCI and ISA-PnP devices */ -static DEFINE_PCI_DEVICE_TABLE(pci6208_pci_table) = { - /* { PCI_VENDOR_ID_ADLINK, 0x6208, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, */ - /* { PCI_VENDOR_ID_ADLINK, 0x6208, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, */ - { PCI_DEVICE(PCI_VENDOR_ID_ADLINK, 0x6208) }, - { 0 } -}; - -MODULE_DEVICE_TABLE(pci, pci6208_pci_table); - /* Will be initialized in pci6208_find device(). */ #define thisboard ((const struct pci6208_board *)dev->board_ptr) @@ -107,157 +96,6 @@ struct pci6208_private { #define devpriv ((struct pci6208_private *)dev->private) -static int pci6208_attach(struct comedi_device *dev, - struct comedi_devconfig *it); -static int pci6208_detach(struct comedi_device *dev); - -static struct comedi_driver driver_pci6208 = { - .driver_name = PCI6208_DRIVER_NAME, - .module = THIS_MODULE, - .attach = pci6208_attach, - .detach = pci6208_detach, -}; - -static int __devinit driver_pci6208_pci_probe(struct pci_dev *dev, - const struct pci_device_id *ent) -{ - return comedi_pci_auto_config(dev, driver_pci6208.driver_name); -} - -static void __devexit driver_pci6208_pci_remove(struct pci_dev *dev) -{ - comedi_pci_auto_unconfig(dev); -} - -static struct pci_driver driver_pci6208_pci_driver = { - .id_table = pci6208_pci_table, - .probe = &driver_pci6208_pci_probe, - .remove = __devexit_p(&driver_pci6208_pci_remove) -}; - -static int __init driver_pci6208_init_module(void) -{ - int retval; - - retval = comedi_driver_register(&driver_pci6208); - if (retval < 0) - return retval; - - driver_pci6208_pci_driver.name = (char *)driver_pci6208.driver_name; - return pci_register_driver(&driver_pci6208_pci_driver); -} - -static void __exit driver_pci6208_cleanup_module(void) -{ - pci_unregister_driver(&driver_pci6208_pci_driver); - comedi_driver_unregister(&driver_pci6208); -} - -module_init(driver_pci6208_init_module); -module_exit(driver_pci6208_cleanup_module); - -static int pci6208_find_device(struct comedi_device *dev, int bus, int slot); -static int -pci6208_pci_setup(struct pci_dev *pci_dev, unsigned long *io_base_ptr, - int dev_minor); - -/*read/write functions*/ -static int pci6208_ao_winsn(struct comedi_device *dev, - struct comedi_subdevice *s, - struct comedi_insn *insn, unsigned int *data); -static int pci6208_ao_rinsn(struct comedi_device *dev, - struct comedi_subdevice *s, - struct comedi_insn *insn, unsigned int *data); -/* static int pci6208_dio_insn_bits (struct comedi_device *dev, - * struct comedi_subdevice *s, */ -/* struct comedi_insn *insn,unsigned int *data); */ -/* static int pci6208_dio_insn_config(struct comedi_device *dev, - * struct comedi_subdevice *s, */ -/* struct comedi_insn *insn,unsigned int *data); */ - -/* - * Attach is called by the Comedi core to configure the driver - * for a particular board. If you specified a board_name array - * in the driver structure, dev->board_ptr contains that - * address. - */ -static int pci6208_attach(struct comedi_device *dev, - struct comedi_devconfig *it) -{ - struct comedi_subdevice *s; - int retval; - unsigned long io_base; - - printk(KERN_INFO "comedi%d: pci6208: ", dev->minor); - - retval = alloc_private(dev, sizeof(struct pci6208_private)); - if (retval < 0) - return retval; - - retval = pci6208_find_device(dev, it->options[0], it->options[1]); - if (retval < 0) - return retval; - - retval = pci6208_pci_setup(devpriv->pci_dev, &io_base, dev->minor); - if (retval < 0) - return retval; - - dev->iobase = io_base; - dev->board_name = thisboard->name; - -/* - * Allocate the subdevice structures. alloc_subdevice() is a - * convenient macro defined in comedidev.h. - */ - if (alloc_subdevices(dev, 2) < 0) - return -ENOMEM; - - s = dev->subdevices + 0; - /* analog output subdevice */ - s->type = COMEDI_SUBD_AO; - s->subdev_flags = SDF_WRITABLE; /* anything else to add here?? */ - s->n_chan = thisboard->ao_chans; - s->maxdata = 0xffff; /* 16-bit DAC */ - s->range_table = &range_bipolar10; /* this needs to be checked. */ - s->insn_write = pci6208_ao_winsn; - s->insn_read = pci6208_ao_rinsn; - - /* s=dev->subdevices+1; */ - /* digital i/o subdevice */ - /* s->type=COMEDI_SUBD_DIO; */ - /* s->subdev_flags=SDF_READABLE|SDF_WRITABLE; */ - /* s->n_chan=16; */ - /* s->maxdata=1; */ - /* s->range_table=&range_digital; */ - /* s->insn_bits = pci6208_dio_insn_bits; */ - /* s->insn_config = pci6208_dio_insn_config; */ - - printk(KERN_INFO "attached\n"); - - return 1; -} - -/* - * _detach is called to deconfigure a device. It should deallocate - * resources. - * This function is also called when _attach() fails, so it should be - * careful not to release resources that were not necessarily - * allocated by _attach(). dev->private and dev->subdevices are - * deallocated automatically by the core. - */ -static int pci6208_detach(struct comedi_device *dev) -{ - printk(KERN_INFO "comedi%d: pci6208: remove\n", dev->minor); - - if (devpriv && devpriv->pci_dev) { - if (dev->iobase) - comedi_pci_disable(devpriv->pci_dev); - pci_dev_put(devpriv->pci_dev); - } - - return 0; -} - static int pci6208_ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data) @@ -442,6 +280,125 @@ pci6208_pci_setup(struct pci_dev *pci_dev, unsigned long *io_base_ptr, return 0; } +static int pci6208_attach(struct comedi_device *dev, + struct comedi_devconfig *it) +{ + struct comedi_subdevice *s; + int retval; + unsigned long io_base; + + printk(KERN_INFO "comedi%d: pci6208: ", dev->minor); + + retval = alloc_private(dev, sizeof(struct pci6208_private)); + if (retval < 0) + return retval; + + retval = pci6208_find_device(dev, it->options[0], it->options[1]); + if (retval < 0) + return retval; + + retval = pci6208_pci_setup(devpriv->pci_dev, &io_base, dev->minor); + if (retval < 0) + return retval; + + dev->iobase = io_base; + dev->board_name = thisboard->name; + + if (alloc_subdevices(dev, 2) < 0) + return -ENOMEM; + + s = dev->subdevices + 0; + /* analog output subdevice */ + s->type = COMEDI_SUBD_AO; + s->subdev_flags = SDF_WRITABLE; /* anything else to add here?? */ + s->n_chan = thisboard->ao_chans; + s->maxdata = 0xffff; /* 16-bit DAC */ + s->range_table = &range_bipolar10; /* this needs to be checked. */ + s->insn_write = pci6208_ao_winsn; + s->insn_read = pci6208_ao_rinsn; + + /* s=dev->subdevices+1; */ + /* digital i/o subdevice */ + /* s->type=COMEDI_SUBD_DIO; */ + /* s->subdev_flags=SDF_READABLE|SDF_WRITABLE; */ + /* s->n_chan=16; */ + /* s->maxdata=1; */ + /* s->range_table=&range_digital; */ + /* s->insn_bits = pci6208_dio_insn_bits; */ + /* s->insn_config = pci6208_dio_insn_config; */ + + printk(KERN_INFO "attached\n"); + + return 1; +} + +static int pci6208_detach(struct comedi_device *dev) +{ + printk(KERN_INFO "comedi%d: pci6208: remove\n", dev->minor); + + if (devpriv && devpriv->pci_dev) { + if (dev->iobase) + comedi_pci_disable(devpriv->pci_dev); + pci_dev_put(devpriv->pci_dev); + } + + return 0; +} + +static struct comedi_driver driver_pci6208 = { + .driver_name = PCI6208_DRIVER_NAME, + .module = THIS_MODULE, + .attach = pci6208_attach, + .detach = pci6208_detach, +}; + +static int __devinit driver_pci6208_pci_probe(struct pci_dev *dev, + const struct pci_device_id *ent) +{ + return comedi_pci_auto_config(dev, &driver_pci6208); +} + +static void __devexit driver_pci6208_pci_remove(struct pci_dev *dev) +{ + comedi_pci_auto_unconfig(dev); +} + +/* This is used by modprobe to translate PCI IDs to drivers. Should + * only be used for PCI and ISA-PnP devices */ +static DEFINE_PCI_DEVICE_TABLE(pci6208_pci_table) = { + /* { PCI_VENDOR_ID_ADLINK, 0x6208, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, */ + /* { PCI_VENDOR_ID_ADLINK, 0x6208, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, */ + { PCI_DEVICE(PCI_VENDOR_ID_ADLINK, 0x6208) }, + { 0 } +}; +MODULE_DEVICE_TABLE(pci, pci6208_pci_table); + +static struct pci_driver driver_pci6208_pci_driver = { + .id_table = pci6208_pci_table, + .probe = driver_pci6208_pci_probe, + .remove = __devexit_p(driver_pci6208_pci_remove), +}; + +static int __init driver_pci6208_init_module(void) +{ + int retval; + + retval = comedi_driver_register(&driver_pci6208); + if (retval < 0) + return retval; + + driver_pci6208_pci_driver.name = (char *)driver_pci6208.driver_name; + return pci_register_driver(&driver_pci6208_pci_driver); +} +module_init(driver_pci6208_init_module); + +static void __exit driver_pci6208_cleanup_module(void) +{ + pci_unregister_driver(&driver_pci6208_pci_driver); + comedi_driver_unregister(&driver_pci6208); +} +module_exit(driver_pci6208_cleanup_module); + MODULE_AUTHOR("Comedi http://www.comedi.org"); MODULE_DESCRIPTION("Comedi low-level driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/staging/comedi/drivers/adl_pci7230.c b/drivers/staging/comedi/drivers/adl_pci7230.c index 20d570554fa..7bb66b0897b 100644 --- a/drivers/staging/comedi/drivers/adl_pci7230.c +++ b/drivers/staging/comedi/drivers/adl_pci7230.c @@ -43,13 +43,6 @@ Configuration Options: #define PCI_DEVICE_ID_PCI7230 0x7230 -static DEFINE_PCI_DEVICE_TABLE(adl_pci7230_pci_table) = { - { PCI_DEVICE(PCI_VENDOR_ID_ADLINK, PCI_DEVICE_ID_PCI7230) }, - {0} -}; - -MODULE_DEVICE_TABLE(pci, adl_pci7230_pci_table); - struct adl_pci7230_private { int data; struct pci_dev *pci_dev; @@ -57,27 +50,36 @@ struct adl_pci7230_private { #define devpriv ((struct adl_pci7230_private *)dev->private) -static int adl_pci7230_attach(struct comedi_device *dev, - struct comedi_devconfig *it); -static int adl_pci7230_detach(struct comedi_device *dev); -static struct comedi_driver driver_adl_pci7230 = { - .driver_name = "adl_pci7230", - .module = THIS_MODULE, - .attach = adl_pci7230_attach, - .detach = adl_pci7230_detach, -}; +static int adl_pci7230_do_insn_bits(struct comedi_device *dev, + struct comedi_subdevice *s, + struct comedi_insn *insn, + unsigned int *data) +{ + if (insn->n != 2) + return -EINVAL; -/* Digital IO */ + if (data[0]) { + s->state &= ~data[0]; + s->state |= (data[0] & data[1]); + + outl((s->state << 16) & 0xffffffff, dev->iobase + PCI7230_DO); + } + + return 2; +} static int adl_pci7230_di_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s, struct comedi_insn *insn, - unsigned int *data); + unsigned int *data) +{ + if (insn->n != 2) + return -EINVAL; -static int adl_pci7230_do_insn_bits(struct comedi_device *dev, - struct comedi_subdevice *s, - struct comedi_insn *insn, - unsigned int *data); + data[1] = inl(dev->iobase + PCI7230_DI) & 0xffffffff; + + return 2; +} static int adl_pci7230_attach(struct comedi_device *dev, struct comedi_devconfig *it) @@ -161,42 +163,18 @@ static int adl_pci7230_detach(struct comedi_device *dev) return 0; } -static int adl_pci7230_do_insn_bits(struct comedi_device *dev, - struct comedi_subdevice *s, - struct comedi_insn *insn, - unsigned int *data) -{ - if (insn->n != 2) - return -EINVAL; - - if (data[0]) { - s->state &= ~data[0]; - s->state |= (data[0] & data[1]); - - outl((s->state << 16) & 0xffffffff, dev->iobase + PCI7230_DO); - } - - return 2; -} - -static int adl_pci7230_di_insn_bits(struct comedi_device *dev, - struct comedi_subdevice *s, - struct comedi_insn *insn, - unsigned int *data) -{ - if (insn->n != 2) - return -EINVAL; - - data[1] = inl(dev->iobase + PCI7230_DI) & 0xffffffff; - - return 2; -} +static struct comedi_driver driver_adl_pci7230 = { + .driver_name = "adl_pci7230", + .module = THIS_MODULE, + .attach = adl_pci7230_attach, + .detach = adl_pci7230_detach, +}; static int __devinit driver_adl_pci7230_pci_probe(struct pci_dev *dev, const struct pci_device_id *ent) { - return comedi_pci_auto_config(dev, driver_adl_pci7230.driver_name); + return comedi_pci_auto_config(dev, &driver_adl_pci7230); } static void __devexit driver_adl_pci7230_pci_remove(struct pci_dev *dev) @@ -204,10 +182,16 @@ static void __devexit driver_adl_pci7230_pci_remove(struct pci_dev *dev) comedi_pci_auto_unconfig(dev); } +static DEFINE_PCI_DEVICE_TABLE(adl_pci7230_pci_table) = { + { PCI_DEVICE(PCI_VENDOR_ID_ADLINK, PCI_DEVICE_ID_PCI7230) }, + {0} +}; +MODULE_DEVICE_TABLE(pci, adl_pci7230_pci_table); + static struct pci_driver driver_adl_pci7230_pci_driver = { - .id_table = adl_pci7230_pci_table, - .probe = &driver_adl_pci7230_pci_probe, - .remove = __devexit_p(&driver_adl_pci7230_pci_remove) + .id_table = adl_pci7230_pci_table, + .probe = driver_adl_pci7230_pci_probe, + .remove = __devexit_p(driver_adl_pci7230_pci_remove) }; static int __init driver_adl_pci7230_init_module(void) @@ -222,14 +206,13 @@ static int __init driver_adl_pci7230_init_module(void) (char *)driver_adl_pci7230.driver_name; return pci_register_driver(&driver_adl_pci7230_pci_driver); } +module_init(driver_adl_pci7230_init_module); static void __exit driver_adl_pci7230_cleanup_module(void) { pci_unregister_driver(&driver_adl_pci7230_pci_driver); comedi_driver_unregister(&driver_adl_pci7230); } - -module_init(driver_adl_pci7230_init_module); module_exit(driver_adl_pci7230_cleanup_module); MODULE_AUTHOR("Comedi http://www.comedi.org"); diff --git a/drivers/staging/comedi/drivers/adl_pci7296.c b/drivers/staging/comedi/drivers/adl_pci7296.c index 9a2320537bd..2bd749bac62 100644 --- a/drivers/staging/comedi/drivers/adl_pci7296.c +++ b/drivers/staging/comedi/drivers/adl_pci7296.c @@ -48,13 +48,6 @@ Configuration Options: #define PCI_DEVICE_ID_PCI7296 0x7296 -static DEFINE_PCI_DEVICE_TABLE(adl_pci7296_pci_table) = { - { PCI_DEVICE(PCI_VENDOR_ID_ADLINK, PCI_DEVICE_ID_PCI7296) }, - {0} -}; - -MODULE_DEVICE_TABLE(pci, adl_pci7296_pci_table); - struct adl_pci7296_private { int data; struct pci_dev *pci_dev; @@ -63,16 +56,6 @@ struct adl_pci7296_private { #define devpriv ((struct adl_pci7296_private *)dev->private) static int adl_pci7296_attach(struct comedi_device *dev, - struct comedi_devconfig *it); -static int adl_pci7296_detach(struct comedi_device *dev); -static struct comedi_driver driver_adl_pci7296 = { - .driver_name = "adl_pci7296", - .module = THIS_MODULE, - .attach = adl_pci7296_attach, - .detach = adl_pci7296_detach, -}; - -static int adl_pci7296_attach(struct comedi_device *dev, struct comedi_devconfig *it) { struct pci_dev *pcidev = NULL; @@ -172,11 +155,18 @@ static int adl_pci7296_detach(struct comedi_device *dev) return 0; } +static struct comedi_driver driver_adl_pci7296 = { + .driver_name = "adl_pci7296", + .module = THIS_MODULE, + .attach = adl_pci7296_attach, + .detach = adl_pci7296_detach, +}; + static int __devinit driver_adl_pci7296_pci_probe(struct pci_dev *dev, const struct pci_device_id *ent) { - return comedi_pci_auto_config(dev, driver_adl_pci7296.driver_name); + return comedi_pci_auto_config(dev, &driver_adl_pci7296); } static void __devexit driver_adl_pci7296_pci_remove(struct pci_dev *dev) @@ -184,10 +174,16 @@ static void __devexit driver_adl_pci7296_pci_remove(struct pci_dev *dev) comedi_pci_auto_unconfig(dev); } +static DEFINE_PCI_DEVICE_TABLE(adl_pci7296_pci_table) = { + { PCI_DEVICE(PCI_VENDOR_ID_ADLINK, PCI_DEVICE_ID_PCI7296) }, + {0} +}; +MODULE_DEVICE_TABLE(pci, adl_pci7296_pci_table); + static struct pci_driver driver_adl_pci7296_pci_driver = { - .id_table = adl_pci7296_pci_table, - .probe = &driver_adl_pci7296_pci_probe, - .remove = __devexit_p(&driver_adl_pci7296_pci_remove) + .id_table = adl_pci7296_pci_table, + .probe = driver_adl_pci7296_pci_probe, + .remove = __devexit_p(driver_adl_pci7296_pci_remove) }; static int __init driver_adl_pci7296_init_module(void) @@ -202,14 +198,13 @@ static int __init driver_adl_pci7296_init_module(void) (char *)driver_adl_pci7296.driver_name; return pci_register_driver(&driver_adl_pci7296_pci_driver); } +module_init(driver_adl_pci7296_init_module); static void __exit driver_adl_pci7296_cleanup_module(void) { pci_unregister_driver(&driver_adl_pci7296_pci_driver); comedi_driver_unregister(&driver_adl_pci7296); } - -module_init(driver_adl_pci7296_init_module); module_exit(driver_adl_pci7296_cleanup_module); MODULE_AUTHOR("Comedi http://www.comedi.org"); diff --git a/drivers/staging/comedi/drivers/adl_pci7432.c b/drivers/staging/comedi/drivers/adl_pci7432.c index 86ee2197604..db15ec6eb10 100644 --- a/drivers/staging/comedi/drivers/adl_pci7432.c +++ b/drivers/staging/comedi/drivers/adl_pci7432.c @@ -43,13 +43,6 @@ Configuration Options: #define PCI_DEVICE_ID_PCI7432 0x7432 -static DEFINE_PCI_DEVICE_TABLE(adl_pci7432_pci_table) = { - { PCI_DEVICE(PCI_VENDOR_ID_ADLINK, PCI_DEVICE_ID_PCI7432) }, - {0} -}; - -MODULE_DEVICE_TABLE(pci, adl_pci7432_pci_table); - struct adl_pci7432_private { int data; struct pci_dev *pci_dev; @@ -57,29 +50,44 @@ struct adl_pci7432_private { #define devpriv ((struct adl_pci7432_private *)dev->private) -static int adl_pci7432_attach(struct comedi_device *dev, - struct comedi_devconfig *it); -static int adl_pci7432_detach(struct comedi_device *dev); -static struct comedi_driver driver_adl_pci7432 = { - .driver_name = "adl_pci7432", - .module = THIS_MODULE, - .attach = adl_pci7432_attach, - .detach = adl_pci7432_detach, -}; +static int adl_pci7432_do_insn_bits(struct comedi_device *dev, + struct comedi_subdevice *s, + struct comedi_insn *insn, + unsigned int *data) +{ + printk(KERN_DEBUG "comedi: pci7432_do_insn_bits called\n"); + printk(KERN_DEBUG "comedi: data0: %8x data1: %8x\n", data[0], data[1]); + + if (insn->n != 2) + return -EINVAL; -/* Digital IO */ + if (data[0]) { + s->state &= ~data[0]; + s->state |= (data[0] & data[1]); + + printk(KERN_DEBUG "comedi: out: %8x on iobase %4lx\n", s->state, + dev->iobase + PCI7432_DO); + outl(s->state & 0xffffffff, dev->iobase + PCI7432_DO); + } + return 2; +} static int adl_pci7432_di_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s, struct comedi_insn *insn, - unsigned int *data); + unsigned int *data) +{ + printk(KERN_DEBUG "comedi: pci7432_di_insn_bits called\n"); + printk(KERN_DEBUG "comedi: data0: %8x data1: %8x\n", data[0], data[1]); -static int adl_pci7432_do_insn_bits(struct comedi_device *dev, - struct comedi_subdevice *s, - struct comedi_insn *insn, - unsigned int *data); + if (insn->n != 2) + return -EINVAL; -/* */ + data[1] = inl(dev->iobase + PCI7432_DI) & 0xffffffff; + printk(KERN_DEBUG "comedi: data1 %8x\n", data[1]); + + return 2; +} static int adl_pci7432_attach(struct comedi_device *dev, struct comedi_devconfig *it) @@ -166,50 +174,18 @@ static int adl_pci7432_detach(struct comedi_device *dev) return 0; } -static int adl_pci7432_do_insn_bits(struct comedi_device *dev, - struct comedi_subdevice *s, - struct comedi_insn *insn, - unsigned int *data) -{ - printk(KERN_DEBUG "comedi: pci7432_do_insn_bits called\n"); - printk(KERN_DEBUG "comedi: data0: %8x data1: %8x\n", data[0], data[1]); - - if (insn->n != 2) - return -EINVAL; - - if (data[0]) { - s->state &= ~data[0]; - s->state |= (data[0] & data[1]); - - printk(KERN_DEBUG "comedi: out: %8x on iobase %4lx\n", s->state, - dev->iobase + PCI7432_DO); - outl(s->state & 0xffffffff, dev->iobase + PCI7432_DO); - } - return 2; -} - -static int adl_pci7432_di_insn_bits(struct comedi_device *dev, - struct comedi_subdevice *s, - struct comedi_insn *insn, - unsigned int *data) -{ - printk(KERN_DEBUG "comedi: pci7432_di_insn_bits called\n"); - printk(KERN_DEBUG "comedi: data0: %8x data1: %8x\n", data[0], data[1]); - - if (insn->n != 2) - return -EINVAL; - - data[1] = inl(dev->iobase + PCI7432_DI) & 0xffffffff; - printk(KERN_DEBUG "comedi: data1 %8x\n", data[1]); - - return 2; -} +static struct comedi_driver driver_adl_pci7432 = { + .driver_name = "adl_pci7432", + .module = THIS_MODULE, + .attach = adl_pci7432_attach, + .detach = adl_pci7432_detach, +}; static int __devinit driver_adl_pci7432_pci_probe(struct pci_dev *dev, const struct pci_device_id *ent) { - return comedi_pci_auto_config(dev, driver_adl_pci7432.driver_name); + return comedi_pci_auto_config(dev, &driver_adl_pci7432); } static void __devexit driver_adl_pci7432_pci_remove(struct pci_dev *dev) @@ -217,10 +193,16 @@ static void __devexit driver_adl_pci7432_pci_remove(struct pci_dev *dev) comedi_pci_auto_unconfig(dev); } +static DEFINE_PCI_DEVICE_TABLE(adl_pci7432_pci_table) = { + { PCI_DEVICE(PCI_VENDOR_ID_ADLINK, PCI_DEVICE_ID_PCI7432) }, + {0} +}; +MODULE_DEVICE_TABLE(pci, adl_pci7432_pci_table); + static struct pci_driver driver_adl_pci7432_pci_driver = { - .id_table = adl_pci7432_pci_table, - .probe = &driver_adl_pci7432_pci_probe, - .remove = __devexit_p(&driver_adl_pci7432_pci_remove) + .id_table = adl_pci7432_pci_table, + .probe = driver_adl_pci7432_pci_probe, + .remove = __devexit_p(driver_adl_pci7432_pci_remove) }; static int __init driver_adl_pci7432_init_module(void) @@ -235,14 +217,13 @@ static int __init driver_adl_pci7432_init_module(void) (char *)driver_adl_pci7432.driver_name; return pci_register_driver(&driver_adl_pci7432_pci_driver); } +module_init(driver_adl_pci7432_init_module); static void __exit driver_adl_pci7432_cleanup_module(void) { pci_unregister_driver(&driver_adl_pci7432_pci_driver); comedi_driver_unregister(&driver_adl_pci7432); } - -module_init(driver_adl_pci7432_init_module); module_exit(driver_adl_pci7432_cleanup_module); MODULE_AUTHOR("Comedi http://www.comedi.org"); diff --git a/drivers/staging/comedi/drivers/adl_pci8164.c b/drivers/staging/comedi/drivers/adl_pci8164.c index 3b83d65bc1b..6b32e45c022 100644 --- a/drivers/staging/comedi/drivers/adl_pci8164.c +++ b/drivers/staging/comedi/drivers/adl_pci8164.c @@ -56,13 +56,6 @@ Configuration Options: #define PCI_DEVICE_ID_PCI8164 0x8164 -static DEFINE_PCI_DEVICE_TABLE(adl_pci8164_pci_table) = { - { PCI_DEVICE(PCI_VENDOR_ID_ADLINK, PCI_DEVICE_ID_PCI8164) }, - {0} -}; - -MODULE_DEVICE_TABLE(pci, adl_pci8164_pci_table); - struct adl_pci8164_private { int data; struct pci_dev *pci_dev; @@ -70,159 +63,6 @@ struct adl_pci8164_private { #define devpriv ((struct adl_pci8164_private *)dev->private) -static int adl_pci8164_attach(struct comedi_device *dev, - struct comedi_devconfig *it); -static int adl_pci8164_detach(struct comedi_device *dev); -static struct comedi_driver driver_adl_pci8164 = { - .driver_name = "adl_pci8164", - .module = THIS_MODULE, - .attach = adl_pci8164_attach, - .detach = adl_pci8164_detach, -}; - -static int adl_pci8164_insn_read_msts(struct comedi_device *dev, - struct comedi_subdevice *s, - struct comedi_insn *insn, - unsigned int *data); - -static int adl_pci8164_insn_read_ssts(struct comedi_device *dev, - struct comedi_subdevice *s, - struct comedi_insn *insn, - unsigned int *data); - -static int adl_pci8164_insn_read_buf0(struct comedi_device *dev, - struct comedi_subdevice *s, - struct comedi_insn *insn, - unsigned int *data); - -static int adl_pci8164_insn_read_buf1(struct comedi_device *dev, - struct comedi_subdevice *s, - struct comedi_insn *insn, - unsigned int *data); - -static int adl_pci8164_insn_write_cmd(struct comedi_device *dev, - struct comedi_subdevice *s, - struct comedi_insn *insn, - unsigned int *data); - -static int adl_pci8164_insn_write_otp(struct comedi_device *dev, - struct comedi_subdevice *s, - struct comedi_insn *insn, - unsigned int *data); - -static int adl_pci8164_insn_write_buf0(struct comedi_device *dev, - struct comedi_subdevice *s, - struct comedi_insn *insn, - unsigned int *data); - -static int adl_pci8164_insn_write_buf1(struct comedi_device *dev, - struct comedi_subdevice *s, - struct comedi_insn *insn, - unsigned int *data); - -static int adl_pci8164_attach(struct comedi_device *dev, - struct comedi_devconfig *it) -{ - struct pci_dev *pcidev = NULL; - struct comedi_subdevice *s; - int bus, slot; - - printk(KERN_INFO "comedi: attempt to attach...\n"); - printk(KERN_INFO "comedi%d: adl_pci8164\n", dev->minor); - - dev->board_name = "pci8164"; - bus = it->options[0]; - slot = it->options[1]; - - if (alloc_private(dev, sizeof(struct adl_pci8164_private)) < 0) - return -ENOMEM; - - if (alloc_subdevices(dev, 4) < 0) - return -ENOMEM; - - for_each_pci_dev(pcidev) { - if (pcidev->vendor == PCI_VENDOR_ID_ADLINK && - pcidev->device == PCI_DEVICE_ID_PCI8164) { - if (bus || slot) { - /* requested particular bus/slot */ - if (pcidev->bus->number != bus - || PCI_SLOT(pcidev->devfn) != slot) - continue; - } - devpriv->pci_dev = pcidev; - if (comedi_pci_enable(pcidev, "adl_pci8164") < 0) { - printk(KERN_ERR "comedi%d: Failed to enable " - "PCI device and request regions\n", dev->minor); - return -EIO; - } - dev->iobase = pci_resource_start(pcidev, 2); - printk(KERN_DEBUG "comedi: base addr %4lx\n", - dev->iobase); - - s = dev->subdevices + 0; - s->type = COMEDI_SUBD_PROC; - s->subdev_flags = SDF_READABLE | SDF_WRITABLE; - s->n_chan = 4; - s->maxdata = 0xffff; - s->len_chanlist = 4; - /* s->range_table = &range_axis; */ - s->insn_read = adl_pci8164_insn_read_msts; - s->insn_write = adl_pci8164_insn_write_cmd; - - s = dev->subdevices + 1; - s->type = COMEDI_SUBD_PROC; - s->subdev_flags = SDF_READABLE | SDF_WRITABLE; - s->n_chan = 4; - s->maxdata = 0xffff; - s->len_chanlist = 4; - /* s->range_table = &range_axis; */ - s->insn_read = adl_pci8164_insn_read_ssts; - s->insn_write = adl_pci8164_insn_write_otp; - - s = dev->subdevices + 2; - s->type = COMEDI_SUBD_PROC; - s->subdev_flags = SDF_READABLE | SDF_WRITABLE; - s->n_chan = 4; - s->maxdata = 0xffff; - s->len_chanlist = 4; - /* s->range_table = &range_axis; */ - s->insn_read = adl_pci8164_insn_read_buf0; - s->insn_write = adl_pci8164_insn_write_buf0; - - s = dev->subdevices + 3; - s->type = COMEDI_SUBD_PROC; - s->subdev_flags = SDF_READABLE | SDF_WRITABLE; - s->n_chan = 4; - s->maxdata = 0xffff; - s->len_chanlist = 4; - /* s->range_table = &range_axis; */ - s->insn_read = adl_pci8164_insn_read_buf1; - s->insn_write = adl_pci8164_insn_write_buf1; - - printk(KERN_INFO "comedi: attached\n"); - - return 1; - } - } - - printk(KERN_ERR "comedi%d: no supported board found!" - "(req. bus/slot : %d/%d)\n", dev->minor, bus, slot); - return -EIO; -} - -static int adl_pci8164_detach(struct comedi_device *dev) -{ - printk(KERN_INFO "comedi%d: pci8164: remove\n", dev->minor); - - if (devpriv && devpriv->pci_dev) { - if (dev->iobase) - comedi_pci_disable(devpriv->pci_dev); - pci_dev_put(devpriv->pci_dev); - } - - return 0; -} - /* all the read commands are the same except for the addition a constant * const to the data for inw() @@ -384,11 +224,121 @@ static int adl_pci8164_insn_write_buf1(struct comedi_device *dev, return 2; } +static int adl_pci8164_attach(struct comedi_device *dev, + struct comedi_devconfig *it) +{ + struct pci_dev *pcidev = NULL; + struct comedi_subdevice *s; + int bus, slot; + + printk(KERN_INFO "comedi: attempt to attach...\n"); + printk(KERN_INFO "comedi%d: adl_pci8164\n", dev->minor); + + dev->board_name = "pci8164"; + bus = it->options[0]; + slot = it->options[1]; + + if (alloc_private(dev, sizeof(struct adl_pci8164_private)) < 0) + return -ENOMEM; + + if (alloc_subdevices(dev, 4) < 0) + return -ENOMEM; + + for_each_pci_dev(pcidev) { + if (pcidev->vendor == PCI_VENDOR_ID_ADLINK && + pcidev->device == PCI_DEVICE_ID_PCI8164) { + if (bus || slot) { + /* requested particular bus/slot */ + if (pcidev->bus->number != bus + || PCI_SLOT(pcidev->devfn) != slot) + continue; + } + devpriv->pci_dev = pcidev; + if (comedi_pci_enable(pcidev, "adl_pci8164") < 0) { + printk(KERN_ERR "comedi%d: Failed to enable " + "PCI device and request regions\n", dev->minor); + return -EIO; + } + dev->iobase = pci_resource_start(pcidev, 2); + printk(KERN_DEBUG "comedi: base addr %4lx\n", + dev->iobase); + + s = dev->subdevices + 0; + s->type = COMEDI_SUBD_PROC; + s->subdev_flags = SDF_READABLE | SDF_WRITABLE; + s->n_chan = 4; + s->maxdata = 0xffff; + s->len_chanlist = 4; + /* s->range_table = &range_axis; */ + s->insn_read = adl_pci8164_insn_read_msts; + s->insn_write = adl_pci8164_insn_write_cmd; + + s = dev->subdevices + 1; + s->type = COMEDI_SUBD_PROC; + s->subdev_flags = SDF_READABLE | SDF_WRITABLE; + s->n_chan = 4; + s->maxdata = 0xffff; + s->len_chanlist = 4; + /* s->range_table = &range_axis; */ + s->insn_read = adl_pci8164_insn_read_ssts; + s->insn_write = adl_pci8164_insn_write_otp; + + s = dev->subdevices + 2; + s->type = COMEDI_SUBD_PROC; + s->subdev_flags = SDF_READABLE | SDF_WRITABLE; + s->n_chan = 4; + s->maxdata = 0xffff; + s->len_chanlist = 4; + /* s->range_table = &range_axis; */ + s->insn_read = adl_pci8164_insn_read_buf0; + s->insn_write = adl_pci8164_insn_write_buf0; + + s = dev->subdevices + 3; + s->type = COMEDI_SUBD_PROC; + s->subdev_flags = SDF_READABLE | SDF_WRITABLE; + s->n_chan = 4; + s->maxdata = 0xffff; + s->len_chanlist = 4; + /* s->range_table = &range_axis; */ + s->insn_read = adl_pci8164_insn_read_buf1; + s->insn_write = adl_pci8164_insn_write_buf1; + + printk(KERN_INFO "comedi: attached\n"); + + return 1; + } + } + + printk(KERN_ERR "comedi%d: no supported board found!" + "(req. bus/slot : %d/%d)\n", dev->minor, bus, slot); + return -EIO; +} + +static int adl_pci8164_detach(struct comedi_device *dev) +{ + printk(KERN_INFO "comedi%d: pci8164: remove\n", dev->minor); + + if (devpriv && devpriv->pci_dev) { + if (dev->iobase) + comedi_pci_disable(devpriv->pci_dev); + pci_dev_put(devpriv->pci_dev); + } + + return 0; +} + +static struct comedi_driver driver_adl_pci8164 = { + .driver_name = "adl_pci8164", + .module = THIS_MODULE, + .attach = adl_pci8164_attach, + .detach = adl_pci8164_detach, +}; + static int __devinit driver_adl_pci8164_pci_probe(struct pci_dev *dev, const struct pci_device_id *ent) { - return comedi_pci_auto_config(dev, driver_adl_pci8164.driver_name); + return comedi_pci_auto_config(dev, &driver_adl_pci8164); } static void __devexit driver_adl_pci8164_pci_remove(struct pci_dev *dev) @@ -396,10 +346,16 @@ static void __devexit driver_adl_pci8164_pci_remove(struct pci_dev *dev) comedi_pci_auto_unconfig(dev); } +static DEFINE_PCI_DEVICE_TABLE(adl_pci8164_pci_table) = { + { PCI_DEVICE(PCI_VENDOR_ID_ADLINK, PCI_DEVICE_ID_PCI8164) }, + {0} +}; +MODULE_DEVICE_TABLE(pci, adl_pci8164_pci_table); + static struct pci_driver driver_adl_pci8164_pci_driver = { - .id_table = adl_pci8164_pci_table, - .probe = &driver_adl_pci8164_pci_probe, - .remove = __devexit_p(&driver_adl_pci8164_pci_remove) + .id_table = adl_pci8164_pci_table, + .probe = driver_adl_pci8164_pci_probe, + .remove = __devexit_p(driver_adl_pci8164_pci_remove), }; static int __init driver_adl_pci8164_init_module(void) @@ -414,14 +370,13 @@ static int __init driver_adl_pci8164_init_module(void) (char *)driver_adl_pci8164.driver_name; return pci_register_driver(&driver_adl_pci8164_pci_driver); } +module_init(driver_adl_pci8164_init_module); static void __exit driver_adl_pci8164_cleanup_module(void) { pci_unregister_driver(&driver_adl_pci8164_pci_driver); comedi_driver_unregister(&driver_adl_pci8164); } - -module_init(driver_adl_pci8164_init_module); module_exit(driver_adl_pci8164_cleanup_module); MODULE_AUTHOR("Comedi http://www.comedi.org"); diff --git a/drivers/staging/comedi/drivers/adl_pci9111.c b/drivers/staging/comedi/drivers/adl_pci9111.c index 2a9bd88a4ab..4e4e5fdcda3 100644 --- a/drivers/staging/comedi/drivers/adl_pci9111.c +++ b/drivers/staging/comedi/drivers/adl_pci9111.c @@ -289,16 +289,6 @@ TODO: PCI9111_IO_BASE+PCI9111_REGISTER_8254_COUNTER_2); \ } while (0) -/* Function prototypes */ - -static int pci9111_attach(struct comedi_device *dev, - struct comedi_devconfig *it); -static int pci9111_detach(struct comedi_device *dev); -static void pci9111_ai_munge(struct comedi_device *dev, - struct comedi_subdevice *s, void *data, - unsigned int num_bytes, - unsigned int start_chan_index); - static const struct comedi_lrange pci9111_hr_ai_range = { 5, { @@ -310,14 +300,6 @@ static const struct comedi_lrange pci9111_hr_ai_range = { } }; -static DEFINE_PCI_DEVICE_TABLE(pci9111_pci_table) = { - { PCI_DEVICE(PCI_VENDOR_ID_ADLINK, PCI9111_HR_DEVICE_ID) }, - /* { PCI_DEVICE(PCI_VENDOR_ID_ADLINK, PCI9111_HG_DEVICE_ID) }, */ - { 0 } -}; - -MODULE_DEVICE_TABLE(pci, pci9111_pci_table); - /* */ /* Board specification structure */ /* */ @@ -354,51 +336,6 @@ static const struct pci9111_board pci9111_boards[] = { #define pci9111_board_nbr \ (sizeof(pci9111_boards)/sizeof(struct pci9111_board)) -static struct comedi_driver pci9111_driver = { - .driver_name = PCI9111_DRIVER_NAME, - .module = THIS_MODULE, - .attach = pci9111_attach, - .detach = pci9111_detach, -}; - -static int __devinit pci9111_driver_pci_probe(struct pci_dev *dev, - const struct pci_device_id *ent) -{ - return comedi_pci_auto_config(dev, pci9111_driver.driver_name); -} - -static void __devexit pci9111_driver_pci_remove(struct pci_dev *dev) -{ - comedi_pci_auto_unconfig(dev); -} - -static struct pci_driver pci9111_driver_pci_driver = { - .id_table = pci9111_pci_table, - .probe = &pci9111_driver_pci_probe, - .remove = __devexit_p(&pci9111_driver_pci_remove) -}; - -static int __init pci9111_driver_init_module(void) -{ - int retval; - - retval = comedi_driver_register(&pci9111_driver); - if (retval < 0) - return retval; - - pci9111_driver_pci_driver.name = (char *)pci9111_driver.driver_name; - return pci_register_driver(&pci9111_driver_pci_driver); -} - -static void __exit pci9111_driver_cleanup_module(void) -{ - pci_unregister_driver(&pci9111_driver_pci_driver); - comedi_driver_unregister(&pci9111_driver); -} - -module_init(pci9111_driver_init_module); -module_exit(pci9111_driver_cleanup_module); - /* Private data structure */ struct pci9111_private_data { @@ -1470,6 +1407,57 @@ static int pci9111_detach(struct comedi_device *dev) return 0; } +static struct comedi_driver pci9111_driver = { + .driver_name = PCI9111_DRIVER_NAME, + .module = THIS_MODULE, + .attach = pci9111_attach, + .detach = pci9111_detach, +}; + +static int __devinit pci9111_driver_pci_probe(struct pci_dev *dev, + const struct pci_device_id *ent) +{ + return comedi_pci_auto_config(dev, &pci9111_driver); +} + +static void __devexit pci9111_driver_pci_remove(struct pci_dev *dev) +{ + comedi_pci_auto_unconfig(dev); +} + +static DEFINE_PCI_DEVICE_TABLE(pci9111_pci_table) = { + { PCI_DEVICE(PCI_VENDOR_ID_ADLINK, PCI9111_HR_DEVICE_ID) }, + /* { PCI_DEVICE(PCI_VENDOR_ID_ADLINK, PCI9111_HG_DEVICE_ID) }, */ + { 0 } +}; +MODULE_DEVICE_TABLE(pci, pci9111_pci_table); + +static struct pci_driver pci9111_driver_pci_driver = { + .id_table = pci9111_pci_table, + .probe = pci9111_driver_pci_probe, + .remove = __devexit_p(pci9111_driver_pci_remove), +}; + +static int __init pci9111_driver_init_module(void) +{ + int retval; + + retval = comedi_driver_register(&pci9111_driver); + if (retval < 0) + return retval; + + pci9111_driver_pci_driver.name = (char *)pci9111_driver.driver_name; + return pci_register_driver(&pci9111_driver_pci_driver); +} +module_init(pci9111_driver_init_module); + +static void __exit pci9111_driver_cleanup_module(void) +{ + pci_unregister_driver(&pci9111_driver_pci_driver); + comedi_driver_unregister(&pci9111_driver); +} +module_exit(pci9111_driver_cleanup_module); + MODULE_AUTHOR("Comedi http://www.comedi.org"); MODULE_DESCRIPTION("Comedi low-level driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/staging/comedi/drivers/adl_pci9118.c b/drivers/staging/comedi/drivers/adl_pci9118.c index f17654e44ae..5b845734fe8 100644 --- a/drivers/staging/comedi/drivers/adl_pci9118.c +++ b/drivers/staging/comedi/drivers/adl_pci9118.c @@ -277,14 +277,12 @@ static const struct boardtype boardtypes[] = { 10000, 40, 512}, }; -#define n_boardtypes (sizeof(boardtypes)/sizeof(struct boardtype)) - static struct comedi_driver driver_pci9118 = { .driver_name = "adl_pci9118", .module = THIS_MODULE, .attach = pci9118_attach, .detach = pci9118_detach, - .num_names = n_boardtypes, + .num_names = ARRAY_SIZE(boardtypes), .board_name = &boardtypes[0].name, .offset = sizeof(struct boardtype), }; @@ -292,7 +290,7 @@ static struct comedi_driver driver_pci9118 = { static int __devinit driver_pci9118_pci_probe(struct pci_dev *dev, const struct pci_device_id *ent) { - return comedi_pci_auto_config(dev, driver_pci9118.driver_name); + return comedi_pci_auto_config(dev, &driver_pci9118); } static void __devexit driver_pci9118_pci_remove(struct pci_dev *dev) diff --git a/drivers/staging/comedi/drivers/adq12b.c b/drivers/staging/comedi/drivers/adq12b.c index 5361f318b01..275cb771f77 100644 --- a/drivers/staging/comedi/drivers/adq12b.c +++ b/drivers/staging/comedi/drivers/adq12b.c @@ -125,24 +125,6 @@ struct adq12b_board { int do_chans; }; -static const struct adq12b_board adq12b_boards[] = { - { - .name = "adq12b", - .ai_se_chans = 16, - .ai_diff_chans = 8, - .ai_bits = 12, - .di_chans = 5, - .do_chans = 8} -/* potentially, more adq-based deviced will be added */ -/*, - .name = "adq12b", - .ai_chans = 16, // this is just for reference, hardcoded again later - .ai_bits = 12, - .di_chans = 8, - .do_chans = 5 - }*/ -}; - #define thisboard ((const struct adq12b_board *)dev->board_ptr) struct adq12b_private { @@ -156,41 +138,88 @@ struct adq12b_private { #define devpriv ((struct adq12b_private *)dev->private) /* - * The struct comedi_driver structure tells the Comedi core module - * which functions to call to configure/deconfigure (attach/detach) - * the board, and also about the kernel module that contains - * the device code. + * "instructions" read/write data in "one-shot" or "software-triggered" + * mode. */ -static int adq12b_attach(struct comedi_device *dev, - struct comedi_devconfig *it); -static int adq12b_detach(struct comedi_device *dev); - -static struct comedi_driver driver_adq12b = { - .driver_name = "adq12b", - .module = THIS_MODULE, - .attach = adq12b_attach, - .detach = adq12b_detach, - .board_name = &adq12b_boards[0].name, - .offset = sizeof(struct adq12b_board), - .num_names = ARRAY_SIZE(adq12b_boards), -}; static int adq12b_ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s, struct comedi_insn *insn, - unsigned int *data); + unsigned int *data) +{ + int n, i; + int range, channel; + unsigned char hi, lo, status; + + /* change channel and range only if it is different from the previous */ + range = CR_RANGE(insn->chanspec); + channel = CR_CHAN(insn->chanspec); + if (channel != devpriv->last_channel || range != devpriv->last_range) { + outb((range << 4) | channel, dev->iobase + ADQ12B_CTREG); + udelay(50); /* wait for the mux to settle */ + } + + /* trigger conversion */ + status = inb(dev->iobase + ADQ12B_ADLOW); + + /* convert n samples */ + for (n = 0; n < insn->n; n++) { + + /* wait for end of conversion */ + i = 0; + do { + /* udelay(1); */ + status = inb(dev->iobase + ADQ12B_STINR); + status = status & ADQ12B_EOC; + } while (status == 0 && ++i < TIMEOUT); + /* } while (++i < 10); */ + + /* read data */ + hi = inb(dev->iobase + ADQ12B_ADHIG); + lo = inb(dev->iobase + ADQ12B_ADLOW); + + /* printk("debug: chan=%d range=%d status=%d hi=%d lo=%d\n", + channel, range, status, hi, lo); */ + data[n] = (hi << 8) | lo; + + } + + /* return the number of samples read/written */ + return n; +} + static int adq12b_di_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s, - struct comedi_insn *insn, unsigned int *data); + struct comedi_insn *insn, unsigned int *data) +{ + + /* only bits 0-4 have information about digital inputs */ + data[1] = (inb(dev->iobase + ADQ12B_STINR) & (0x1f)); + + return 2; +} + static int adq12b_do_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s, - struct comedi_insn *insn, unsigned int *data); + struct comedi_insn *insn, unsigned int *data) +{ + int channel; + + for (channel = 0; channel < 8; channel++) + if (((data[0] >> channel) & 0x01) != 0) + outb((((data[1] >> channel) & 0x01) << 3) | channel, + dev->iobase + ADQ12B_OUTBR); + + /* store information to retrieve when asked for reading */ + if (data[0]) { + devpriv->digital_state &= ~data[0]; + devpriv->digital_state |= (data[0] & data[1]); + } + + data[1] = devpriv->digital_state; + + return 2; +} -/* - * Attach is called by the Comedi core to configure the driver - * for a particular board. If you specified a board_name array - * in the driver structure, dev->board_ptr contains that - * address. - */ static int adq12b_attach(struct comedi_device *dev, struct comedi_devconfig *it) { struct comedi_subdevice *s; @@ -295,14 +324,6 @@ static int adq12b_attach(struct comedi_device *dev, struct comedi_devconfig *it) return 0; } -/* - * _detach is called to deconfigure a device. It should deallocate - * resources. - * This function is also called when _attach() fails, so it should be - * careful not to release resources that were not necessarily - * allocated by _attach(). dev->private and dev->subdevices are - * deallocated automatically by the core. - */ static int adq12b_detach(struct comedi_device *dev) { if (dev->iobase) @@ -315,104 +336,37 @@ static int adq12b_detach(struct comedi_device *dev) return 0; } -/* - * "instructions" read/write data in "one-shot" or "software-triggered" - * mode. - */ - -static int adq12b_ai_rinsn(struct comedi_device *dev, - struct comedi_subdevice *s, struct comedi_insn *insn, - unsigned int *data) -{ - int n, i; - int range, channel; - unsigned char hi, lo, status; - - /* change channel and range only if it is different from the previous */ - range = CR_RANGE(insn->chanspec); - channel = CR_CHAN(insn->chanspec); - if (channel != devpriv->last_channel || range != devpriv->last_range) { - outb((range << 4) | channel, dev->iobase + ADQ12B_CTREG); - udelay(50); /* wait for the mux to settle */ - } - - /* trigger conversion */ - status = inb(dev->iobase + ADQ12B_ADLOW); - - /* convert n samples */ - for (n = 0; n < insn->n; n++) { - - /* wait for end of conversion */ - i = 0; - do { - /* udelay(1); */ - status = inb(dev->iobase + ADQ12B_STINR); - status = status & ADQ12B_EOC; - } while (status == 0 && ++i < TIMEOUT); - /* } while (++i < 10); */ - - /* read data */ - hi = inb(dev->iobase + ADQ12B_ADHIG); - lo = inb(dev->iobase + ADQ12B_ADLOW); - - /* printk("debug: chan=%d range=%d status=%d hi=%d lo=%d\n", - channel, range, status, hi, lo); */ - data[n] = (hi << 8) | lo; - - } - - /* return the number of samples read/written */ - return n; -} - -static int adq12b_di_insn_bits(struct comedi_device *dev, - struct comedi_subdevice *s, - struct comedi_insn *insn, unsigned int *data) -{ - - /* only bits 0-4 have information about digital inputs */ - data[1] = (inb(dev->iobase + ADQ12B_STINR) & (0x1f)); - - return 2; -} - -static int adq12b_do_insn_bits(struct comedi_device *dev, - struct comedi_subdevice *s, - struct comedi_insn *insn, unsigned int *data) -{ - int channel; - - for (channel = 0; channel < 8; channel++) - if (((data[0] >> channel) & 0x01) != 0) - outb((((data[1] >> channel) & 0x01) << 3) | channel, - dev->iobase + ADQ12B_OUTBR); - - /* store information to retrieve when asked for reading */ - if (data[0]) { - devpriv->digital_state &= ~data[0]; - devpriv->digital_state |= (data[0] & data[1]); - } - - data[1] = devpriv->digital_state; +static const struct adq12b_board adq12b_boards[] = { + { + .name = "adq12b", + .ai_se_chans = 16, + .ai_diff_chans = 8, + .ai_bits = 12, + .di_chans = 5, + .do_chans = 8, + }, +}; - return 2; -} +static struct comedi_driver driver_adq12b = { + .driver_name = "adq12b", + .module = THIS_MODULE, + .attach = adq12b_attach, + .detach = adq12b_detach, + .board_name = &adq12b_boards[0].name, + .offset = sizeof(struct adq12b_board), + .num_names = ARRAY_SIZE(adq12b_boards), +}; -/* - * A convenient macro that defines init_module() and cleanup_module(), - * as necessary. - */ static int __init driver_adq12b_init_module(void) { return comedi_driver_register(&driver_adq12b); } +module_init(driver_adq12b_init_module); static void __exit driver_adq12b_cleanup_module(void) { comedi_driver_unregister(&driver_adq12b); } - -module_init(driver_adq12b_init_module); module_exit(driver_adq12b_cleanup_module); MODULE_AUTHOR("Comedi http://www.comedi.org"); diff --git a/drivers/staging/comedi/drivers/adv_pci1710.c b/drivers/staging/comedi/drivers/adv_pci1710.c index 8318c82a555..9eaae0d18d1 100644 --- a/drivers/staging/comedi/drivers/adv_pci1710.c +++ b/drivers/staging/comedi/drivers/adv_pci1710.c @@ -264,14 +264,12 @@ static const struct boardtype boardtypes[] = { {.name = DRV_NAME}, }; -#define n_boardtypes (sizeof(boardtypes)/sizeof(struct boardtype)) - static struct comedi_driver driver_pci1710 = { .driver_name = DRV_NAME, .module = THIS_MODULE, .attach = pci1710_attach, .detach = pci1710_detach, - .num_names = n_boardtypes, + .num_names = ARRAY_SIZE(boardtypes), .board_name = &boardtypes[0].name, .offset = sizeof(struct boardtype), }; @@ -676,7 +674,9 @@ static void interrupt_pci1710_every_sample(void *d) s->async->buf_int_count, s->async->buf_int_ptr, s->async->buf_user_count, s->async->buf_user_ptr); DPRINTK("adv_pci1710 EDBG: EOS2\n"); - if ((!devpriv->neverending_ai) && (devpriv->ai_act_scan >= devpriv->ai_scans)) { /* all data sampled */ + if ((!devpriv->neverending_ai) && + (devpriv->ai_act_scan >= devpriv->ai_scans)) { + /* all data sampled */ pci171x_ai_cancel(dev, s); s->async->events |= COMEDI_CB_EOA; comedi_event(dev, s); @@ -804,8 +804,8 @@ static irqreturn_t interrupt_service_pci1710(int irq, void *d) irq); if (!dev->attached) /* is device attached? */ return IRQ_NONE; /* no, exit */ - - if (!(inw(dev->iobase + PCI171x_STATUS) & Status_IRQ)) /* is this interrupt from our board? */ + /* is this interrupt from our board? */ + if (!(inw(dev->iobase + PCI171x_STATUS) & Status_IRQ)) return IRQ_NONE; /* no, exit */ DPRINTK("adv_pci1710 EDBG: interrupt_service_pci1710() ST: %4x\n", @@ -814,7 +814,7 @@ static irqreturn_t interrupt_service_pci1710(int irq, void *d) if (devpriv->ai_et) { /* Switch from initial TRIG_EXT to TRIG_xxx. */ devpriv->ai_et = 0; devpriv->CntrlReg &= Control_CNT0; - devpriv->CntrlReg |= Control_SW; /* set software trigger */ + devpriv->CntrlReg |= Control_SW; /* set software trigger */ outw(devpriv->CntrlReg, dev->iobase + PCI171x_CONTROL); devpriv->CntrlReg = devpriv->ai_et_CntrlReg; outb(0, dev->iobase + PCI171x_CLRFIFO); @@ -865,7 +865,8 @@ static int pci171x_ai_docmd_and_mode(int mode, struct comedi_device *dev, devpriv->neverending_ai = 0; devpriv->CntrlReg &= Control_CNT0; - if ((devpriv->ai_flags & TRIG_WAKE_EOS)) { /* don't we want wake up every scan? devpriv->ai_eos=1; */ + /* don't we want wake up every scan? devpriv->ai_eos=1; */ + if ((devpriv->ai_flags & TRIG_WAKE_EOS)) { devpriv->ai_eos = 1; } else { devpriv->CntrlReg |= Control_ONEFH; @@ -982,13 +983,13 @@ static int pci171x_ai_cmdtest(struct comedi_device *dev, #ifdef PCI171X_EXTDEBUG pci171x_cmdtest_out(1, cmd); #endif - DPRINTK - ("adv_pci1710 EDBG: BGN: pci171x_ai_cmdtest(...) err=%d ret=1\n", - err); + DPRINTK( + "adv_pci1710 EDBG: BGN: pci171x_ai_cmdtest(...) err=%d ret=1\n", + err); return 1; } - /* step 2: make sure trigger sources are unique and mutually compatible */ + /* step2: make sure trigger srcs are unique and mutually compatible */ if (cmd->start_src != TRIG_NOW && cmd->start_src != TRIG_EXT) { cmd->start_src = TRIG_NOW; @@ -1015,9 +1016,9 @@ static int pci171x_ai_cmdtest(struct comedi_device *dev, #ifdef PCI171X_EXTDEBUG pci171x_cmdtest_out(2, cmd); #endif - DPRINTK - ("adv_pci1710 EDBG: BGN: pci171x_ai_cmdtest(...) err=%d ret=2\n", - err); + DPRINTK( + "adv_pci1710 EDBG: BGN: pci171x_ai_cmdtest(...) err=%d ret=2\n", + err); return 2; } @@ -1065,9 +1066,9 @@ static int pci171x_ai_cmdtest(struct comedi_device *dev, #ifdef PCI171X_EXTDEBUG pci171x_cmdtest_out(3, cmd); #endif - DPRINTK - ("adv_pci1710 EDBG: BGN: pci171x_ai_cmdtest(...) err=%d ret=3\n", - err); + DPRINTK( + "adv_pci1710 EDBG: BGN: pci171x_ai_cmdtest(...) err=%d ret=3\n", + err); return 3; } @@ -1398,13 +1399,13 @@ static int pci1710_attach(struct comedi_device *dev, while (NULL != (pcidev = pci_get_device(PCI_VENDOR_ID_ADVANTECH, PCI_ANY_ID, pcidev))) { if (strcmp(this_board->name, DRV_NAME) == 0) { - for (i = 0; i < n_boardtypes; ++i) { + for (i = 0; i < ARRAY_SIZE(boardtypes); ++i) { if (pcidev->device == boardtypes[i].device_id) { board_index = i; break; } } - if (i == n_boardtypes) + if (i == ARRAY_SIZE(boardtypes)) continue; } else { if (pcidev->device != boardtypes[board_index].device_id) @@ -1612,7 +1613,7 @@ static int pci1710_detach(struct comedi_device *dev) static int __devinit driver_pci1710_pci_probe(struct pci_dev *dev, const struct pci_device_id *ent) { - return comedi_pci_auto_config(dev, driver_pci1710.driver_name); + return comedi_pci_auto_config(dev, &driver_pci1710); } static void __devexit driver_pci1710_pci_remove(struct pci_dev *dev) diff --git a/drivers/staging/comedi/drivers/adv_pci1723.c b/drivers/staging/comedi/drivers/adv_pci1723.c index 29455a8e88b..54a33042354 100644 --- a/drivers/staging/comedi/drivers/adv_pci1723.c +++ b/drivers/staging/comedi/drivers/adv_pci1723.c @@ -150,36 +150,6 @@ static const struct pci1723_board boardtypes[] = { }, }; -/* - * This is used by modprobe to translate PCI IDs to drivers. - * Should only be used for PCI and ISA-PnP devices - */ -static DEFINE_PCI_DEVICE_TABLE(pci1723_pci_table) = { - { PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1723) }, - { 0 } -}; - -MODULE_DEVICE_TABLE(pci, pci1723_pci_table); - -/* - * The struct comedi_driver structure tells the Comedi core module - * which functions to call to configure/deconfigure (attach/detach) - * the board, and also about the kernel module that contains - * the device code. - */ -static int pci1723_attach(struct comedi_device *dev, - struct comedi_devconfig *it); -static int pci1723_detach(struct comedi_device *dev); - -#define n_boardtypes (sizeof(boardtypes)/sizeof(struct pci1723_board)) - -static struct comedi_driver driver_pci1723 = { - .driver_name = "adv_pci1723", - .module = THIS_MODULE, - .attach = pci1723_attach, - .detach = pci1723_detach, -}; - /* This structure is for data unique to this hardware driver. */ struct pci1723_private { int valid; /* card is usable; */ @@ -319,10 +289,6 @@ static int pci1723_dio_insn_bits(struct comedi_device *dev, return 2; } -/* - * Attach is called by the Comedi core to configure the driver - * for a pci1723 board. - */ static int pci1723_attach(struct comedi_device *dev, struct comedi_devconfig *it) { @@ -465,14 +431,6 @@ static int pci1723_attach(struct comedi_device *dev, return 0; } -/* - * _detach is called to deconfigure a device. It should deallocate - * resources. - * This function is also called when _attach() fails, so it should be - * careful not to release resources that were not necessarily - * allocated by _attach(). dev->private and dev->subdevices are - * deallocated automatically by the core. - */ static int pci1723_detach(struct comedi_device *dev) { printk(KERN_ERR "comedi%d: pci1723: remove\n", dev->minor); @@ -491,14 +449,17 @@ static int pci1723_detach(struct comedi_device *dev) return 0; } -/* - * A convenient macro that defines init_module() and cleanup_module(), - * as necessary. - */ +static struct comedi_driver driver_pci1723 = { + .driver_name = "adv_pci1723", + .module = THIS_MODULE, + .attach = pci1723_attach, + .detach = pci1723_detach, +}; + static int __devinit driver_pci1723_pci_probe(struct pci_dev *dev, const struct pci_device_id *ent) { - return comedi_pci_auto_config(dev, driver_pci1723.driver_name); + return comedi_pci_auto_config(dev, &driver_pci1723); } static void __devexit driver_pci1723_pci_remove(struct pci_dev *dev) @@ -506,10 +467,16 @@ static void __devexit driver_pci1723_pci_remove(struct pci_dev *dev) comedi_pci_auto_unconfig(dev); } +static DEFINE_PCI_DEVICE_TABLE(pci1723_pci_table) = { + { PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1723) }, + { 0 } +}; +MODULE_DEVICE_TABLE(pci, pci1723_pci_table); + static struct pci_driver driver_pci1723_pci_driver = { - .id_table = pci1723_pci_table, - .probe = &driver_pci1723_pci_probe, - .remove = __devexit_p(&driver_pci1723_pci_remove) + .id_table = pci1723_pci_table, + .probe = driver_pci1723_pci_probe, + .remove = __devexit_p(driver_pci1723_pci_remove), }; static int __init driver_pci1723_init_module(void) @@ -523,14 +490,13 @@ static int __init driver_pci1723_init_module(void) driver_pci1723_pci_driver.name = (char *)driver_pci1723.driver_name; return pci_register_driver(&driver_pci1723_pci_driver); } +module_init(driver_pci1723_init_module); static void __exit driver_pci1723_cleanup_module(void) { pci_unregister_driver(&driver_pci1723_pci_driver); comedi_driver_unregister(&driver_pci1723); } - -module_init(driver_pci1723_init_module); module_exit(driver_pci1723_cleanup_module); MODULE_AUTHOR("Comedi http://www.comedi.org"); diff --git a/drivers/staging/comedi/drivers/adv_pci_dio.c b/drivers/staging/comedi/drivers/adv_pci_dio.c index 7af068f4a74..7d920fe636c 100644 --- a/drivers/staging/comedi/drivers/adv_pci_dio.c +++ b/drivers/staging/comedi/drivers/adv_pci_dio.c @@ -406,8 +406,6 @@ static const struct dio_boardtype boardtypes[] = { IO_16b} }; -#define n_boardtypes (sizeof(boardtypes)/sizeof(struct dio_boardtype)) - static struct comedi_driver driver_pci_dio = { .driver_name = "adv_pci_dio", .module = THIS_MODULE, @@ -1134,7 +1132,7 @@ static int pci_dio_attach(struct comedi_device *dev, for_each_pci_dev(pcidev) { /* loop through cards supported by this driver */ - for (i = 0; i < n_boardtypes; ++i) { + for (i = 0; i < ARRAY_SIZE(boardtypes); ++i) { if (boardtypes[i].vendor_id != pcidev->vendor) continue; if (boardtypes[i].device_id != pcidev->device) @@ -1319,7 +1317,7 @@ static int pci_dio_detach(struct comedi_device *dev) static int __devinit driver_pci_dio_pci_probe(struct pci_dev *dev, const struct pci_device_id *ent) { - return comedi_pci_auto_config(dev, driver_pci_dio.driver_name); + return comedi_pci_auto_config(dev, &driver_pci_dio); } static void __devexit driver_pci_dio_pci_remove(struct pci_dev *dev) diff --git a/drivers/staging/comedi/drivers/aio_iiro_16.c b/drivers/staging/comedi/drivers/aio_iiro_16.c index 160b0a0f4f1..763461a569a 100644 --- a/drivers/staging/comedi/drivers/aio_iiro_16.c +++ b/drivers/staging/comedi/drivers/aio_iiro_16.c @@ -67,30 +67,41 @@ struct aio_iiro_16_private { #define devpriv ((struct aio_iiro_16_private *) dev->private) -static int aio_iiro_16_attach(struct comedi_device *dev, - struct comedi_devconfig *it); +static int aio_iiro_16_dio_insn_bits_write(struct comedi_device *dev, + struct comedi_subdevice *s, + struct comedi_insn *insn, + unsigned int *data) +{ + if (insn->n != 2) + return -EINVAL; -static int aio_iiro_16_detach(struct comedi_device *dev); + if (data[0]) { + s->state &= ~data[0]; + s->state |= data[0] & data[1]; + outb(s->state & 0xff, dev->iobase + AIO_IIRO_16_RELAY_0_7); + outb((s->state >> 8) & 0xff, + dev->iobase + AIO_IIRO_16_RELAY_8_15); + } -static struct comedi_driver driver_aio_iiro_16 = { - .driver_name = "aio_iiro_16", - .module = THIS_MODULE, - .attach = aio_iiro_16_attach, - .detach = aio_iiro_16_detach, - .board_name = &aio_iiro_16_boards[0].name, - .offset = sizeof(struct aio_iiro_16_board), - .num_names = ARRAY_SIZE(aio_iiro_16_boards), -}; + data[1] = s->state; + + return 2; +} static int aio_iiro_16_dio_insn_bits_read(struct comedi_device *dev, struct comedi_subdevice *s, struct comedi_insn *insn, - unsigned int *data); + unsigned int *data) +{ + if (insn->n != 2) + return -EINVAL; -static int aio_iiro_16_dio_insn_bits_write(struct comedi_device *dev, - struct comedi_subdevice *s, - struct comedi_insn *insn, - unsigned int *data); + data[1] = 0; + data[1] |= inb(dev->iobase + AIO_IIRO_16_INPUT_0_7); + data[1] |= inb(dev->iobase + AIO_IIRO_16_INPUT_8_15) << 8; + + return 2; +} static int aio_iiro_16_attach(struct comedi_device *dev, struct comedi_devconfig *it) @@ -148,53 +159,26 @@ static int aio_iiro_16_detach(struct comedi_device *dev) return 0; } -static int aio_iiro_16_dio_insn_bits_write(struct comedi_device *dev, - struct comedi_subdevice *s, - struct comedi_insn *insn, - unsigned int *data) -{ - if (insn->n != 2) - return -EINVAL; - - if (data[0]) { - s->state &= ~data[0]; - s->state |= data[0] & data[1]; - outb(s->state & 0xff, dev->iobase + AIO_IIRO_16_RELAY_0_7); - outb((s->state >> 8) & 0xff, - dev->iobase + AIO_IIRO_16_RELAY_8_15); - } - - data[1] = s->state; - - return 2; -} - -static int aio_iiro_16_dio_insn_bits_read(struct comedi_device *dev, - struct comedi_subdevice *s, - struct comedi_insn *insn, - unsigned int *data) -{ - if (insn->n != 2) - return -EINVAL; - - data[1] = 0; - data[1] |= inb(dev->iobase + AIO_IIRO_16_INPUT_0_7); - data[1] |= inb(dev->iobase + AIO_IIRO_16_INPUT_8_15) << 8; - - return 2; -} +static struct comedi_driver driver_aio_iiro_16 = { + .driver_name = "aio_iiro_16", + .module = THIS_MODULE, + .attach = aio_iiro_16_attach, + .detach = aio_iiro_16_detach, + .board_name = &aio_iiro_16_boards[0].name, + .offset = sizeof(struct aio_iiro_16_board), + .num_names = ARRAY_SIZE(aio_iiro_16_boards), +}; static int __init driver_aio_iiro_16_init_module(void) { return comedi_driver_register(&driver_aio_iiro_16); } +module_init(driver_aio_iiro_16_init_module); static void __exit driver_aio_iiro_16_cleanup_module(void) { comedi_driver_unregister(&driver_aio_iiro_16); } - -module_init(driver_aio_iiro_16_init_module); module_exit(driver_aio_iiro_16_cleanup_module); MODULE_AUTHOR("Comedi http://www.comedi.org"); diff --git a/drivers/staging/comedi/drivers/amplc_dio200.c b/drivers/staging/comedi/drivers/amplc_dio200.c index 566cc441145..cbfa0cd6a1d 100644 --- a/drivers/staging/comedi/drivers/amplc_dio200.c +++ b/drivers/staging/comedi/drivers/amplc_dio200.c @@ -217,6 +217,14 @@ order they appear in the channel list. #define DIO200_DRIVER_NAME "amplc_dio200" +#ifdef CONFIG_COMEDI_AMPLC_DIO200_ISA_MODULE +#define CONFIG_COMEDI_AMPLC_DIO200_ISA +#endif + +#ifdef CONFIG_COMEDI_AMPLC_DIO200_PCI_MODULE +#define CONFIG_COMEDI_AMPLC_DIO200_PCI +#endif + /* PCI IDs */ #define PCI_VENDOR_ID_AMPLICON 0x14dc #define PCI_DEVICE_ID_AMPLICON_PCI272 0x000a @@ -274,10 +282,14 @@ enum dio200_model { }; enum dio200_layout { +#ifdef CONFIG_COMEDI_AMPLC_DIO200_ISA pc212_layout, pc214_layout, +#endif pc215_layout, +#ifdef CONFIG_COMEDI_AMPLC_DIO200_ISA pc218_layout, +#endif pc272_layout }; @@ -290,6 +302,7 @@ struct dio200_board { }; static const struct dio200_board dio200_boards[] = { +#ifdef CONFIG_COMEDI_AMPLC_DIO200_ISA { .name = "pc212e", .bustype = isa_bustype, @@ -308,15 +321,6 @@ static const struct dio200_board dio200_boards[] = { .model = pc215e_model, .layout = pc215_layout, }, -#ifdef CONFIG_COMEDI_PCI - { - .name = "pci215", - .devid = PCI_DEVICE_ID_AMPLICON_PCI215, - .bustype = pci_bustype, - .model = pci215_model, - .layout = pc215_layout, - }, -#endif { .name = "pc218e", .bustype = isa_bustype, @@ -329,7 +333,15 @@ static const struct dio200_board dio200_boards[] = { .model = pc272e_model, .layout = pc272_layout, }, -#ifdef CONFIG_COMEDI_PCI +#endif +#ifdef CONFIG_COMEDI_AMPLC_DIO200_PCI + { + .name = "pci215", + .devid = PCI_DEVICE_ID_AMPLICON_PCI215, + .bustype = pci_bustype, + .model = pci215_model, + .layout = pc215_layout, + }, { .name = "pci272", .devid = PCI_DEVICE_ID_AMPLICON_PCI272, @@ -337,8 +349,6 @@ static const struct dio200_board dio200_boards[] = { .model = pci272_model, .layout = pc272_layout, }, -#endif -#ifdef CONFIG_COMEDI_PCI { .name = DIO200_DRIVER_NAME, .devid = PCI_DEVICE_ID_INVALID, @@ -367,6 +377,7 @@ struct dio200_layout_struct { }; static const struct dio200_layout_struct dio200_layouts[] = { +#ifdef CONFIG_COMEDI_AMPLC_DIO200_ISA [pc212_layout] = { .n_subdevs = 6, .sdtype = {sd_8255, sd_8254, sd_8254, sd_8254, @@ -385,6 +396,7 @@ static const struct dio200_layout_struct dio200_layouts[] = { .has_int_sce = 0, .has_clk_gat_sce = 0, }, +#endif [pc215_layout] = { .n_subdevs = 5, .sdtype = {sd_8255, sd_8255, sd_8254, @@ -394,6 +406,7 @@ static const struct dio200_layout_struct dio200_layouts[] = { .has_int_sce = 1, .has_clk_gat_sce = 1, }, +#ifdef CONFIG_COMEDI_AMPLC_DIO200_ISA [pc218_layout] = { .n_subdevs = 7, .sdtype = {sd_8254, sd_8254, sd_8255, sd_8254, @@ -405,6 +418,7 @@ static const struct dio200_layout_struct dio200_layouts[] = { .has_int_sce = 1, .has_clk_gat_sce = 1, }, +#endif [pc272_layout] = { .n_subdevs = 4, .sdtype = {sd_8255, sd_8255, sd_8255, @@ -419,7 +433,7 @@ static const struct dio200_layout_struct dio200_layouts[] = { * PCI driver table. */ -#ifdef CONFIG_COMEDI_PCI +#ifdef CONFIG_COMEDI_AMPLC_DIO200_PCI static DEFINE_PCI_DEVICE_TABLE(dio200_pci_table) = { { PCI_DEVICE(PCI_VENDOR_ID_AMPLICON, PCI_DEVICE_ID_AMPLICON_PCI215) }, { PCI_DEVICE(PCI_VENDOR_ID_AMPLICON, PCI_DEVICE_ID_AMPLICON_PCI272) }, @@ -427,7 +441,7 @@ static DEFINE_PCI_DEVICE_TABLE(dio200_pci_table) = { }; MODULE_DEVICE_TABLE(pci, dio200_pci_table); -#endif /* CONFIG_COMEDI_PCI */ +#endif /* CONFIG_COMEDI_AMPLC_DIO200_PCI */ /* * Useful for shorthand access to the particular board structure @@ -441,7 +455,7 @@ MODULE_DEVICE_TABLE(pci, dio200_pci_table); feel free to suggest moving the variable to the struct comedi_device struct. */ struct dio200_private { -#ifdef CONFIG_COMEDI_PCI +#ifdef CONFIG_COMEDI_AMPLC_DIO200_PCI struct pci_dev *pci_dev; /* PCI device */ #endif int intr_sd; @@ -490,12 +504,12 @@ static struct comedi_driver driver_amplc_dio200 = { .num_names = ARRAY_SIZE(dio200_boards), }; -#ifdef CONFIG_COMEDI_PCI +#ifdef CONFIG_COMEDI_AMPLC_DIO200_PCI static int __devinit driver_amplc_dio200_pci_probe(struct pci_dev *dev, const struct pci_device_id *ent) { - return comedi_pci_auto_config(dev, driver_amplc_dio200.driver_name); + return comedi_pci_auto_config(dev, &driver_amplc_dio200); } static void __devexit driver_amplc_dio200_pci_remove(struct pci_dev *dev) @@ -549,7 +563,7 @@ module_exit(driver_amplc_dio200_cleanup_module); * This function looks for a PCI device matching the requested board name, * bus and slot. */ -#ifdef CONFIG_COMEDI_PCI +#ifdef CONFIG_COMEDI_AMPLC_DIO200_PCI static int dio200_find_pci(struct comedi_device *dev, int bus, int slot, struct pci_dev **pci_dev_p) @@ -611,6 +625,7 @@ dio200_find_pci(struct comedi_device *dev, int bus, int slot, * This function checks and requests an I/O region, reporting an error * if there is a conflict. */ +#ifdef CONFIG_COMEDI_AMPLC_DIO200_ISA static int dio200_request_region(unsigned minor, unsigned long from, unsigned long extent) { @@ -621,6 +636,7 @@ dio200_request_region(unsigned minor, unsigned long from, unsigned long extent) } return 0; } +#endif /* * 'insn_bits' function for an 'INTERRUPT' subdevice. @@ -1332,7 +1348,7 @@ static int dio200_attach(struct comedi_device *dev, struct comedi_devconfig *it) struct comedi_subdevice *s; unsigned long iobase = 0; unsigned int irq = 0; -#ifdef CONFIG_COMEDI_PCI +#ifdef CONFIG_COMEDI_AMPLC_DIO200_PCI struct pci_dev *pci_dev = NULL; int bus = 0, slot = 0; #endif @@ -1354,12 +1370,14 @@ static int dio200_attach(struct comedi_device *dev, struct comedi_devconfig *it) /* Process options. */ switch (thisboard->bustype) { +#ifdef CONFIG_COMEDI_AMPLC_DIO200_ISA case isa_bustype: iobase = it->options[0]; irq = it->options[1]; share_irq = 0; break; -#ifdef CONFIG_COMEDI_PCI +#endif +#ifdef CONFIG_COMEDI_AMPLC_DIO200_PCI case pci_bustype: bus = it->options[0]; slot = it->options[1]; @@ -1382,7 +1400,7 @@ static int dio200_attach(struct comedi_device *dev, struct comedi_devconfig *it) devpriv->intr_sd = -1; /* Enable device and reserve I/O spaces. */ -#ifdef CONFIG_COMEDI_PCI +#ifdef CONFIG_COMEDI_AMPLC_DIO200_PCI if (pci_dev) { ret = comedi_pci_enable(pci_dev, DIO200_DRIVER_NAME); if (ret < 0) { @@ -1396,9 +1414,11 @@ static int dio200_attach(struct comedi_device *dev, struct comedi_devconfig *it) } else #endif { +#ifdef CONFIG_COMEDI_AMPLC_DIO200_ISA ret = dio200_request_region(dev->minor, iobase, DIO200_IO_SIZE); if (ret < 0) return ret; +#endif } dev->iobase = iobase; @@ -1474,12 +1494,19 @@ static int dio200_attach(struct comedi_device *dev, struct comedi_devconfig *it) } printk(KERN_INFO "comedi%d: %s ", dev->minor, dev->board_name); - if (thisboard->bustype == isa_bustype) { + switch (thisboard->bustype) { +#ifdef CONFIG_COMEDI_AMPLC_DIO200_ISA + case isa_bustype: printk("(base %#lx) ", iobase); - } else { -#ifdef CONFIG_COMEDI_PCI + break; +#endif +#ifdef CONFIG_COMEDI_AMPLC_DIO200_PCI + case pci_bustype: printk("(pci %s) ", pci_name(pci_dev)); + break; #endif + default: + break; } if (irq) printk("(irq %u%s) ", irq, (dev->irq ? "" : " UNAVAILABLE")); @@ -1529,7 +1556,7 @@ static int dio200_detach(struct comedi_device *dev) } } if (devpriv) { -#ifdef CONFIG_COMEDI_PCI +#ifdef CONFIG_COMEDI_AMPLC_DIO200_PCI if (devpriv->pci_dev) { if (dev->iobase) comedi_pci_disable(devpriv->pci_dev); @@ -1537,8 +1564,10 @@ static int dio200_detach(struct comedi_device *dev) } else #endif { +#ifdef CONFIG_COMEDI_AMPLC_DIO200_ISA if (dev->iobase) release_region(dev->iobase, DIO200_IO_SIZE); +#endif } } if (dev->board_name) diff --git a/drivers/staging/comedi/drivers/amplc_pc236.c b/drivers/staging/comedi/drivers/amplc_pc236.c index 7972cadd403..821cf1dda57 100644 --- a/drivers/staging/comedi/drivers/amplc_pc236.c +++ b/drivers/staging/comedi/drivers/amplc_pc236.c @@ -63,6 +63,14 @@ unused. #define PC236_DRIVER_NAME "amplc_pc236" +#ifdef CONFIG_COMEDI_AMPLC_PC236_ISA_MODULE +#define CONFIG_COMEDI_AMPLC_PC236_ISA +#endif + +#ifdef CONFIG_COMEDI_AMPLC_PC236_PCI_MODULE +#define CONFIG_COMEDI_AMPLC_PC236_PCI +#endif + /* PCI236 PCI configuration register information */ #define PCI_VENDOR_ID_AMPLICON 0x14dc #define PCI_DEVICE_ID_AMPLICON_PCI236 0x0009 @@ -106,13 +114,15 @@ struct pc236_board { enum pc236_model model; }; static const struct pc236_board pc236_boards[] = { +#ifdef CONFIG_COMEDI_AMPLC_PC236_ISA { .name = "pc36at", .fancy_name = "PC36AT", .bustype = isa_bustype, .model = pc36at_model, }, -#ifdef CONFIG_COMEDI_PCI +#endif +#ifdef CONFIG_COMEDI_AMPLC_PC236_PCI { .name = "pci236", .fancy_name = "PCI236", @@ -120,8 +130,6 @@ static const struct pc236_board pc236_boards[] = { .bustype = pci_bustype, .model = pci236_model, }, -#endif -#ifdef CONFIG_COMEDI_PCI { .name = PC236_DRIVER_NAME, .fancy_name = PC236_DRIVER_NAME, @@ -132,14 +140,14 @@ static const struct pc236_board pc236_boards[] = { #endif }; -#ifdef CONFIG_COMEDI_PCI +#ifdef CONFIG_COMEDI_AMPLC_PC236_PCI static DEFINE_PCI_DEVICE_TABLE(pc236_pci_table) = { { PCI_DEVICE(PCI_VENDOR_ID_AMPLICON, PCI_DEVICE_ID_AMPLICON_PCI236) }, {0} }; MODULE_DEVICE_TABLE(pci, pc236_pci_table); -#endif /* CONFIG_COMEDI_PCI */ +#endif /* CONFIG_COMEDI_AMPLC_PC236_PCI */ /* * Useful for shorthand access to the particular board structure @@ -151,7 +159,7 @@ MODULE_DEVICE_TABLE(pci, pc236_pci_table); feel free to suggest moving the variable to the struct comedi_device struct. */ struct pc236_private { -#ifdef CONFIG_COMEDI_PCI +#ifdef CONFIG_COMEDI_AMPLC_PC236_PCI /* PCI device */ struct pci_dev *pci_dev; unsigned long lcr_iobase; /* PLX PCI9052 config registers in PCIBAR1 */ @@ -179,12 +187,12 @@ static struct comedi_driver driver_amplc_pc236 = { .num_names = ARRAY_SIZE(pc236_boards), }; -#ifdef CONFIG_COMEDI_PCI +#ifdef CONFIG_COMEDI_AMPLC_PC236_PCI static int __devinit driver_amplc_pc236_pci_probe(struct pci_dev *dev, const struct pci_device_id *ent) { - return comedi_pci_auto_config(dev, driver_amplc_pc236.driver_name); + return comedi_pci_auto_config(dev, &driver_amplc_pc236); } static void __devexit driver_amplc_pc236_pci_remove(struct pci_dev *dev) @@ -234,8 +242,10 @@ module_init(driver_amplc_pc236_init_module); module_exit(driver_amplc_pc236_cleanup_module); #endif +#ifdef CONFIG_COMEDI_AMPLC_PC236_ISA static int pc236_request_region(unsigned minor, unsigned long from, unsigned long extent); +#endif static void pc236_intr_disable(struct comedi_device *dev); static void pc236_intr_enable(struct comedi_device *dev); static int pc236_intr_check(struct comedi_device *dev); @@ -255,7 +265,7 @@ static irqreturn_t pc236_interrupt(int irq, void *d); * This function looks for a PCI device matching the requested board name, * bus and slot. */ -#ifdef CONFIG_COMEDI_PCI +#ifdef CONFIG_COMEDI_AMPLC_PC236_PCI static int pc236_find_pci(struct comedi_device *dev, int bus, int slot, struct pci_dev **pci_dev_p) @@ -324,7 +334,7 @@ static int pc236_attach(struct comedi_device *dev, struct comedi_devconfig *it) struct comedi_subdevice *s; unsigned long iobase = 0; unsigned int irq = 0; -#ifdef CONFIG_COMEDI_PCI +#ifdef CONFIG_COMEDI_AMPLC_PC236_PCI struct pci_dev *pci_dev = NULL; int bus = 0, slot = 0; #endif @@ -345,12 +355,14 @@ static int pc236_attach(struct comedi_device *dev, struct comedi_devconfig *it) } /* Process options. */ switch (thisboard->bustype) { +#ifdef CONFIG_COMEDI_AMPLC_PC236_ISA case isa_bustype: iobase = it->options[0]; irq = it->options[1]; share_irq = 0; break; -#ifdef CONFIG_COMEDI_PCI +#endif +#ifdef CONFIG_COMEDI_AMPLC_PC236_PCI case pci_bustype: bus = it->options[0]; slot = it->options[1]; @@ -361,7 +373,7 @@ static int pc236_attach(struct comedi_device *dev, struct comedi_devconfig *it) return ret; devpriv->pci_dev = pci_dev; break; -#endif /* CONFIG_COMEDI_PCI */ +#endif default: printk(KERN_ERR "comedi%d: %s: BUG! cannot determine board type!\n", @@ -376,7 +388,7 @@ static int pc236_attach(struct comedi_device *dev, struct comedi_devconfig *it) dev->board_name = thisboard->name; /* Enable device and reserve I/O spaces. */ -#ifdef CONFIG_COMEDI_PCI +#ifdef CONFIG_COMEDI_AMPLC_PC236_PCI if (pci_dev) { ret = comedi_pci_enable(pci_dev, PC236_DRIVER_NAME); @@ -392,9 +404,11 @@ static int pc236_attach(struct comedi_device *dev, struct comedi_devconfig *it) } else #endif { +#ifdef CONFIG_COMEDI_AMPLC_PC236_ISA ret = pc236_request_region(dev->minor, iobase, PC236_IO_SIZE); if (ret < 0) return ret; +#endif } dev->iobase = iobase; @@ -439,12 +453,19 @@ static int pc236_attach(struct comedi_device *dev, struct comedi_devconfig *it) } } printk(KERN_INFO "comedi%d: %s ", dev->minor, dev->board_name); - if (thisboard->bustype == isa_bustype) { + switch (thisboard->bustype) { +#ifdef CONFIG_COMEDI_AMPLC_PC236_ISA + case isa_bustype: printk("(base %#lx) ", iobase); - } else { -#ifdef CONFIG_COMEDI_PCI + break; +#endif +#ifdef CONFIG_COMEDI_AMPLC_PC236_PCI + case pci_bustype: printk("(pci %s) ", pci_name(pci_dev)); + break; #endif + default: + break; } if (irq) printk("(irq %u%s) ", irq, (dev->irq ? "" : " UNAVAILABLE")); @@ -476,7 +497,7 @@ static int pc236_detach(struct comedi_device *dev) if (dev->subdevices) subdev_8255_cleanup(dev, dev->subdevices + 0); if (devpriv) { -#ifdef CONFIG_COMEDI_PCI +#ifdef CONFIG_COMEDI_AMPLC_PC236_PCI if (devpriv->pci_dev) { if (dev->iobase) comedi_pci_disable(devpriv->pci_dev); @@ -484,8 +505,10 @@ static int pc236_detach(struct comedi_device *dev) } else #endif { +#ifdef CONFIG_COMEDI_AMPLC_PC236_ISA if (dev->iobase) release_region(dev->iobase, PC236_IO_SIZE); +#endif } } if (dev->board_name) { @@ -499,6 +522,7 @@ static int pc236_detach(struct comedi_device *dev) * This function checks and requests an I/O region, reporting an error * if there is a conflict. */ +#ifdef CONFIG_COMEDI_AMPLC_PC236_ISA static int pc236_request_region(unsigned minor, unsigned long from, unsigned long extent) { @@ -509,6 +533,7 @@ static int pc236_request_region(unsigned minor, unsigned long from, } return 0; } +#endif /* * This function is called to mark the interrupt as disabled (no command @@ -521,7 +546,7 @@ static void pc236_intr_disable(struct comedi_device *dev) spin_lock_irqsave(&dev->spinlock, flags); devpriv->enable_irq = 0; -#ifdef CONFIG_COMEDI_PCI +#ifdef CONFIG_COMEDI_AMPLC_PC236_PCI if (devpriv->lcr_iobase) outl(PCI236_INTR_DISABLE, devpriv->lcr_iobase + PLX9052_INTCSR); #endif @@ -539,7 +564,7 @@ static void pc236_intr_enable(struct comedi_device *dev) spin_lock_irqsave(&dev->spinlock, flags); devpriv->enable_irq = 1; -#ifdef CONFIG_COMEDI_PCI +#ifdef CONFIG_COMEDI_AMPLC_PC236_PCI if (devpriv->lcr_iobase) outl(PCI236_INTR_ENABLE, devpriv->lcr_iobase + PLX9052_INTCSR); #endif @@ -561,7 +586,7 @@ static int pc236_intr_check(struct comedi_device *dev) spin_lock_irqsave(&dev->spinlock, flags); if (devpriv->enable_irq) { retval = 1; -#ifdef CONFIG_COMEDI_PCI +#ifdef CONFIG_COMEDI_AMPLC_PC236_PCI if (devpriv->lcr_iobase) { if ((inl(devpriv->lcr_iobase + PLX9052_INTCSR) & PLX9052_INTCSR_LI1STAT_MASK) diff --git a/drivers/staging/comedi/drivers/amplc_pc263.c b/drivers/staging/comedi/drivers/amplc_pc263.c index 191ac0d23ce..58ef6e4cc11 100644 --- a/drivers/staging/comedi/drivers/amplc_pc263.c +++ b/drivers/staging/comedi/drivers/amplc_pc263.c @@ -50,6 +50,14 @@ The state of the outputs can be read. #define PC263_DRIVER_NAME "amplc_pc263" +#ifdef CONFIG_COMEDI_AMPLC_PC263_ISA_MODULE +#define CONFIG_COMEDI_AMPLC_PC263_ISA +#endif + +#ifdef CONFIG_COMEDI_AMPLC_PC263_PCI_MODULE +#define CONFIG_COMEDI_AMPLC_PC263_PCI +#endif + /* PCI263 PCI configuration register information */ #define PCI_VENDOR_ID_AMPLICON 0x14dc #define PCI_DEVICE_ID_AMPLICON_PCI263 0x000c @@ -73,13 +81,15 @@ struct pc263_board { enum pc263_model model; }; static const struct pc263_board pc263_boards[] = { +#ifdef CONFIG_COMEDI_AMPLC_PC263_ISA { .name = "pc263", .fancy_name = "PC263", .bustype = isa_bustype, .model = pc263_model, }, -#ifdef CONFIG_COMEDI_PCI +#endif +#ifdef CONFIG_COMEDI_AMPLC_PC263_PCI { .name = "pci263", .fancy_name = "PCI263", @@ -87,8 +97,6 @@ static const struct pc263_board pc263_boards[] = { .bustype = pci_bustype, .model = pci263_model, }, -#endif -#ifdef CONFIG_COMEDI_PCI { .name = PC263_DRIVER_NAME, .fancy_name = PC263_DRIVER_NAME, @@ -99,14 +107,14 @@ static const struct pc263_board pc263_boards[] = { #endif }; -#ifdef CONFIG_COMEDI_PCI +#ifdef CONFIG_COMEDI_AMPLC_PC263_PCI static DEFINE_PCI_DEVICE_TABLE(pc263_pci_table) = { { PCI_DEVICE(PCI_VENDOR_ID_AMPLICON, PCI_DEVICE_ID_AMPLICON_PCI263) }, {0} }; MODULE_DEVICE_TABLE(pci, pc263_pci_table); -#endif /* CONFIG_COMEDI_PCI */ +#endif /* CONFIG_COMEDI_AMPLC_PC263_PCI */ /* * Useful for shorthand access to the particular board structure @@ -117,14 +125,14 @@ MODULE_DEVICE_TABLE(pci, pc263_pci_table); several hardware drivers keep similar information in this structure, feel free to suggest moving the variable to the struct comedi_device struct. */ -#ifdef CONFIG_COMEDI_PCI +#ifdef CONFIG_COMEDI_AMPLC_PC263_PCI struct pc263_private { /* PCI device. */ struct pci_dev *pci_dev; }; #define devpriv ((struct pc263_private *)dev->private) -#endif /* CONFIG_COMEDI_PCI */ +#endif /* CONFIG_COMEDI_AMPLC_PC263_PCI */ /* * The struct comedi_driver structure tells the Comedi core module @@ -144,8 +152,10 @@ static struct comedi_driver driver_amplc_pc263 = { .num_names = ARRAY_SIZE(pc263_boards), }; +#ifdef CONFIG_COMEDI_AMPLC_PC263_ISA static int pc263_request_region(unsigned minor, unsigned long from, unsigned long extent); +#endif static int pc263_dio_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data); @@ -157,7 +167,7 @@ static int pc263_dio_insn_config(struct comedi_device *dev, * This function looks for a PCI device matching the requested board name, * bus and slot. */ -#ifdef CONFIG_COMEDI_PCI +#ifdef CONFIG_COMEDI_AMPLC_PC263_PCI static int pc263_find_pci(struct comedi_device *dev, int bus, int slot, struct pci_dev **pci_dev_p) @@ -225,7 +235,7 @@ static int pc263_attach(struct comedi_device *dev, struct comedi_devconfig *it) { struct comedi_subdevice *s; unsigned long iobase = 0; -#ifdef CONFIG_COMEDI_PCI +#ifdef CONFIG_COMEDI_AMPLC_PC263_PCI struct pci_dev *pci_dev = NULL; int bus = 0, slot = 0; #endif @@ -237,7 +247,7 @@ static int pc263_attach(struct comedi_device *dev, struct comedi_devconfig *it) * Allocate the private structure area. alloc_private() is a * convenient macro defined in comedidev.h. */ -#ifdef CONFIG_COMEDI_PCI +#ifdef CONFIG_COMEDI_AMPLC_PC263_PCI ret = alloc_private(dev, sizeof(struct pc263_private)); if (ret < 0) { printk(KERN_ERR "comedi%d: error! out of memory!\n", @@ -247,10 +257,12 @@ static int pc263_attach(struct comedi_device *dev, struct comedi_devconfig *it) #endif /* Process options. */ switch (thisboard->bustype) { +#ifdef CONFIG_COMEDI_AMPLC_PC263_ISA case isa_bustype: iobase = it->options[0]; break; -#ifdef CONFIG_COMEDI_PCI +#endif +#ifdef CONFIG_COMEDI_AMPLC_PC263_PCI case pci_bustype: bus = it->options[0]; slot = it->options[1]; @@ -260,7 +272,7 @@ static int pc263_attach(struct comedi_device *dev, struct comedi_devconfig *it) return ret; devpriv->pci_dev = pci_dev; break; -#endif /* CONFIG_COMEDI_PCI */ +#endif default: printk(KERN_ERR "comedi%d: %s: BUG! cannot determine board type!\n", @@ -275,7 +287,7 @@ static int pc263_attach(struct comedi_device *dev, struct comedi_devconfig *it) dev->board_name = thisboard->name; /* Enable device and reserve I/O spaces. */ -#ifdef CONFIG_COMEDI_PCI +#ifdef CONFIG_COMEDI_AMPLC_PC263_PCI if (pci_dev) { ret = comedi_pci_enable(pci_dev, PC263_DRIVER_NAME); if (ret < 0) { @@ -289,9 +301,11 @@ static int pc263_attach(struct comedi_device *dev, struct comedi_devconfig *it) } else #endif { +#ifdef CONFIG_COMEDI_AMPLC_PC263_ISA ret = pc263_request_region(dev->minor, iobase, PC263_IO_SIZE); if (ret < 0) return ret; +#endif } dev->iobase = iobase; @@ -322,12 +336,18 @@ static int pc263_attach(struct comedi_device *dev, struct comedi_devconfig *it) s->state = s->state | (inb(dev->iobase) << 8); printk(KERN_INFO "comedi%d: %s ", dev->minor, dev->board_name); - if (thisboard->bustype == isa_bustype) { + switch (thisboard->bustype) { +#ifdef CONFIG_COMEDI_AMPLC_PC263_ISA + case isa_bustype: printk("(base %#lx) ", iobase); - } else { -#ifdef CONFIG_COMEDI_PCI + break; +#endif +#ifdef CONFIG_COMEDI_AMPLC_PC263_PCI printk("(pci %s) ", pci_name(pci_dev)); + break; #endif + default: + break; } printk("attached\n"); @@ -348,10 +368,11 @@ static int pc263_detach(struct comedi_device *dev) printk(KERN_DEBUG "comedi%d: %s: detach\n", dev->minor, PC263_DRIVER_NAME); -#ifdef CONFIG_COMEDI_PCI - if (devpriv) { +#ifdef CONFIG_COMEDI_AMPLC_PC263_PCI + if (devpriv) #endif -#ifdef CONFIG_COMEDI_PCI + { +#ifdef CONFIG_COMEDI_AMPLC_PC263_PCI if (devpriv->pci_dev) { if (dev->iobase) comedi_pci_disable(devpriv->pci_dev); @@ -359,8 +380,10 @@ static int pc263_detach(struct comedi_device *dev) } else #endif { +#ifdef CONFIG_COMEDI_AMPLC_PC263_ISA if (dev->iobase) release_region(dev->iobase, PC263_IO_SIZE); +#endif } } if (dev->board_name) { @@ -374,6 +397,7 @@ static int pc263_detach(struct comedi_device *dev) * This function checks and requests an I/O region, reporting an error * if there is a conflict. */ +#ifdef CONFIG_COMEDI_AMPLC_PC263_ISA static int pc263_request_region(unsigned minor, unsigned long from, unsigned long extent) { @@ -384,6 +408,7 @@ static int pc263_request_region(unsigned minor, unsigned long from, } return 0; } +#endif /* DIO devices are slightly special. Although it is possible to * implement the insn_read/insn_write interface, it is much more @@ -429,12 +454,12 @@ static int pc263_dio_insn_config(struct comedi_device *dev, * A convenient macro that defines init_module() and cleanup_module(), * as necessary. */ -#ifdef CONFIG_COMEDI_PCI +#ifdef CONFIG_COMEDI_AMPLC_PC263_PCI static int __devinit driver_amplc_pc263_pci_probe(struct pci_dev *dev, const struct pci_device_id *ent) { - return comedi_pci_auto_config(dev, driver_amplc_pc263.driver_name); + return comedi_pci_auto_config(dev, &driver_amplc_pc263); } static void __devexit driver_amplc_pc263_pci_remove(struct pci_dev *dev) diff --git a/drivers/staging/comedi/drivers/amplc_pci224.c b/drivers/staging/comedi/drivers/amplc_pci224.c index b278917cec2..fe65338dd32 100644 --- a/drivers/staging/comedi/drivers/amplc_pci224.c +++ b/drivers/staging/comedi/drivers/amplc_pci224.c @@ -430,11 +430,14 @@ struct pci224_private { static int pci224_attach(struct comedi_device *dev, struct comedi_devconfig *it); static int pci224_detach(struct comedi_device *dev); +static int pci224_attach_pci(struct comedi_device *dev, + struct pci_dev *pci_dev); static struct comedi_driver driver_amplc_pci224 = { .driver_name = DRIVER_NAME, .module = THIS_MODULE, .attach = pci224_attach, .detach = pci224_detach, + .attach_pci = pci224_attach_pci, .board_name = &pci224_boards[0].name, .offset = sizeof(struct pci224_board), .num_names = ARRAY_SIZE(pci224_boards), @@ -444,7 +447,7 @@ static int __devinit driver_amplc_pci224_pci_probe(struct pci_dev *dev, const struct pci_device_id *ent) { - return comedi_pci_auto_config(dev, driver_amplc_pci224.driver_name); + return comedi_pci_auto_config(dev, &driver_amplc_pci224); } static void __devexit driver_amplc_pci224_pci_remove(struct pci_dev *dev) @@ -1312,6 +1315,20 @@ static irqreturn_t pci224_interrupt(int irq, void *d) } /* + * This function looks for a board matching the supplied PCI device. + */ +static const struct pci224_board +*pci224_find_pci_board(struct pci_dev *pci_dev) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(pci224_boards); i++) + if (pci_dev->device == pci224_boards[i].devid) + return &pci224_boards[i]; + return NULL; +} + +/* * This function looks for a PCI device matching the requested board name, * bus and slot. */ @@ -1336,17 +1353,12 @@ pci224_find_pci(struct comedi_device *dev, int bus, int slot, } if (thisboard->model == any_model) { /* Match any supported model. */ - int i; - - for (i = 0; i < ARRAY_SIZE(pci224_boards); i++) { - if (pci_dev->device == pci224_boards[i].devid) { - /* Change board_ptr to matched board. */ - dev->board_ptr = &pci224_boards[i]; - break; - } - } - if (i == ARRAY_SIZE(pci224_boards)) + const struct pci224_board *board_ptr; + board_ptr = pci224_find_pci_board(pci_dev); + if (board_ptr == NULL) continue; + /* Change board_ptr to matched board. */ + dev->board_ptr = board_ptr; } else { /* Match specific model name. */ if (thisboard->devid != pci_dev->device) @@ -1370,35 +1382,16 @@ pci224_find_pci(struct comedi_device *dev, int bus, int slot, } /* - * Attach is called by the Comedi core to configure the driver - * for a particular board. If you specified a board_name array - * in the driver structure, dev->board_ptr contains that - * address. + * Common part of attach and attach_pci. */ -static int pci224_attach(struct comedi_device *dev, struct comedi_devconfig *it) +static int pci224_attach_common(struct comedi_device *dev, + struct pci_dev *pci_dev, int *options) { struct comedi_subdevice *s; - struct pci_dev *pci_dev; unsigned int irq; - int bus = 0, slot = 0; unsigned n; int ret; - printk(KERN_DEBUG "comedi%d: %s: attach\n", dev->minor, DRIVER_NAME); - - bus = it->options[0]; - slot = it->options[1]; - ret = alloc_private(dev, sizeof(struct pci224_private)); - if (ret < 0) { - printk(KERN_ERR "comedi%d: error! out of memory!\n", - dev->minor); - return ret; - } - - ret = pci224_find_pci(dev, bus, slot, &pci_dev); - if (ret < 0) - return ret; - devpriv->pci_dev = pci_dev; ret = comedi_pci_enable(pci_dev, DRIVER_NAME); if (ret < 0) { @@ -1483,24 +1476,26 @@ static int pci224_attach(struct comedi_device *dev, struct comedi_devconfig *it) if (!s->range_table_list) return -ENOMEM; - for (n = 2; n < 3 + s->n_chan; n++) { - if (it->options[n] < 0 || it->options[n] > 1) { - printk(KERN_WARNING "comedi%d: %s: warning! " - "bad options[%u]=%d\n", - dev->minor, DRIVER_NAME, n, - it->options[n]); + if (options) { + for (n = 2; n < 3 + s->n_chan; n++) { + if (options[n] < 0 || options[n] > 1) { + printk(KERN_WARNING + "comedi%d: %s: warning! bad options[%u]=%d\n", + dev->minor, DRIVER_NAME, n, + options[n]); + } } } for (n = 0; n < s->n_chan; n++) { - if (n < COMEDI_NDEVCONFOPTS - 3 && - it->options[3 + n] == 1) { - if (it->options[2] == 1) + if (n < COMEDI_NDEVCONFOPTS - 3 && options && + options[3 + n] == 1) { + if (options[2] == 1) range_table_list[n] = &range_pci234_ext; else range_table_list[n] = &range_bipolar5; } else { - if (it->options[2] == 1) { + if (options && options[2] == 1) { range_table_list[n] = &range_pci234_ext2; } else { @@ -1511,14 +1506,14 @@ static int pci224_attach(struct comedi_device *dev, struct comedi_devconfig *it) devpriv->hwrange = hwrange_pci234; } else { /* PCI224 range options. */ - if (it->options[2] == 1) { + if (options && options[2] == 1) { s->range_table = &range_pci224_external; devpriv->hwrange = hwrange_pci224_external; } else { - if (it->options[2] != 0) { + if (options && options[2] != 0) { printk(KERN_WARNING "comedi%d: %s: warning! " "bad options[2]=%d\n", - dev->minor, DRIVER_NAME, it->options[2]); + dev->minor, DRIVER_NAME, options[2]); } s->range_table = &range_pci224_internal; devpriv->hwrange = hwrange_pci224_internal; @@ -1553,6 +1548,66 @@ static int pci224_attach(struct comedi_device *dev, struct comedi_devconfig *it) } /* + * _attach is called by the Comedi core to configure the driver + * for a particular board. If you specified a board_name array + * in the driver structure, dev->board_ptr contains that + * address. + */ +static int pci224_attach(struct comedi_device *dev, struct comedi_devconfig *it) +{ + struct pci_dev *pci_dev; + int bus, slot; + int ret; + + printk(KERN_DEBUG "comedi%d: %s: attach\n", dev->minor, DRIVER_NAME); + + bus = it->options[0]; + slot = it->options[1]; + ret = alloc_private(dev, sizeof(struct pci224_private)); + if (ret < 0) { + printk(KERN_ERR "comedi%d: error! out of memory!\n", + dev->minor); + return ret; + } + + ret = pci224_find_pci(dev, bus, slot, &pci_dev); + if (ret < 0) + return ret; + + return pci224_attach_common(dev, pci_dev, it->options); +} + +/* + * _attach_pci is called by comedi_pci_auto_config() in the Comedi core + * to configure a comedi device for a probed PCI device. + * dev->board_ptr is NULL on entry. + */ +static int +pci224_attach_pci(struct comedi_device *dev, struct pci_dev *pci_dev) +{ + int ret; + + printk(KERN_DEBUG "comedi%d: %s: attach_pci %s\n", dev->minor, + DRIVER_NAME, pci_name(pci_dev)); + + ret = alloc_private(dev, sizeof(struct pci224_private)); + if (ret < 0) { + printk(KERN_ERR "comedi%d: error! out of memory!\n", + dev->minor); + return ret; + } + + dev->board_ptr = pci224_find_pci_board(pci_dev); + if (dev->board_ptr == NULL) { + printk(KERN_ERR + "comedi%d: %s: BUG! cannot determine board type!\n", + dev->minor, DRIVER_NAME); + return -EINVAL; + } + return pci224_attach_common(dev, pci_dev, NULL); +} + +/* * _detach is called to deconfigure a device. It should deallocate * resources. * This function is also called when _attach() fails, so it should be diff --git a/drivers/staging/comedi/drivers/amplc_pci230.c b/drivers/staging/comedi/drivers/amplc_pci230.c index 538979551c8..1d2eb47d32b 100644 --- a/drivers/staging/comedi/drivers/amplc_pci230.c +++ b/drivers/staging/comedi/drivers/amplc_pci230.c @@ -618,7 +618,7 @@ static int __devinit driver_amplc_pci230_pci_probe(struct pci_dev *dev, const struct pci_device_id *ent) { - return comedi_pci_auto_config(dev, driver_amplc_pci230.driver_name); + return comedi_pci_auto_config(dev, &driver_amplc_pci230); } static void __devexit driver_amplc_pci230_pci_remove(struct pci_dev *dev) diff --git a/drivers/staging/comedi/drivers/c6xdigio.c b/drivers/staging/comedi/drivers/c6xdigio.c index 11cdaf2a5aa..5f753515039 100644 --- a/drivers/staging/comedi/drivers/c6xdigio.c +++ b/drivers/staging/comedi/drivers/c6xdigio.c @@ -97,16 +97,6 @@ union encvaluetype { #define C6XDIGIO_TIME_OUT 20 -static int c6xdigio_attach(struct comedi_device *dev, - struct comedi_devconfig *it); -static int c6xdigio_detach(struct comedi_device *dev); -struct comedi_driver driver_c6xdigio = { - .driver_name = "c6xdigio", - .module = THIS_MODULE, - .attach = c6xdigio_attach, - .detach = c6xdigio_detach, -}; - static void C6X_pwmInit(unsigned long baseAddr) { int timeout = 0; @@ -518,17 +508,23 @@ static int c6xdigio_detach(struct comedi_device *dev) return 0; } +struct comedi_driver driver_c6xdigio = { + .driver_name = "c6xdigio", + .module = THIS_MODULE, + .attach = c6xdigio_attach, + .detach = c6xdigio_detach, +}; + static int __init driver_c6xdigio_init_module(void) { return comedi_driver_register(&driver_c6xdigio); } +module_init(driver_c6xdigio_init_module); static void __exit driver_c6xdigio_cleanup_module(void) { comedi_driver_unregister(&driver_c6xdigio); } - -module_init(driver_c6xdigio_init_module); module_exit(driver_c6xdigio_cleanup_module); MODULE_AUTHOR("Comedi http://www.comedi.org"); diff --git a/drivers/staging/comedi/drivers/cb_pcidas.c b/drivers/staging/comedi/drivers/cb_pcidas.c index 7e4ffcfdac6..f1ad286a030 100644 --- a/drivers/staging/comedi/drivers/cb_pcidas.c +++ b/drivers/staging/comedi/drivers/cb_pcidas.c @@ -1925,7 +1925,7 @@ static int nvram_read(struct comedi_device *dev, unsigned int address, static int __devinit driver_cb_pcidas_pci_probe(struct pci_dev *dev, const struct pci_device_id *ent) { - return comedi_pci_auto_config(dev, driver_cb_pcidas.driver_name); + return comedi_pci_auto_config(dev, &driver_cb_pcidas); } static void __devexit driver_cb_pcidas_pci_remove(struct pci_dev *dev) diff --git a/drivers/staging/comedi/drivers/cb_pcidas64.c b/drivers/staging/comedi/drivers/cb_pcidas64.c index 915157d4780..ff79fd4259f 100644 --- a/drivers/staging/comedi/drivers/cb_pcidas64.c +++ b/drivers/staging/comedi/drivers/cb_pcidas64.c @@ -1219,7 +1219,7 @@ static void load_ao_dma(struct comedi_device *dev, static int __devinit driver_cb_pcidas_pci_probe(struct pci_dev *dev, const struct pci_device_id *ent) { - return comedi_pci_auto_config(dev, driver_cb_pcidas.driver_name); + return comedi_pci_auto_config(dev, &driver_cb_pcidas); } static void __devexit driver_cb_pcidas_pci_remove(struct pci_dev *dev) diff --git a/drivers/staging/comedi/drivers/cb_pcidda.c b/drivers/staging/comedi/drivers/cb_pcidda.c index abba220a767..38efb4a0716 100644 --- a/drivers/staging/comedi/drivers/cb_pcidda.c +++ b/drivers/staging/comedi/drivers/cb_pcidda.c @@ -51,9 +51,12 @@ Please report success/failure with other different cards to #include "comedi_pci.h" #include "8255.h" -#define PCI_VENDOR_ID_CB 0x1307 /* PCI vendor number of ComputerBoards */ + +/* PCI vendor number of ComputerBoards */ +#define PCI_VENDOR_ID_CB 0x1307 #define EEPROM_SIZE 128 /* number of entries in eeprom */ -#define MAX_AO_CHANNELS 8 /* maximum number of ao channels for supported boards */ +/* maximum number of ao channels for supported boards */ +#define MAX_AO_CHANNELS 8 /* PCI-DDA base addresses */ #define DIGITALIO_BADRINDEX 2 @@ -94,20 +97,26 @@ Please report success/failure with other different cards to #define DACALIBRATION1 4 /* D/A CALIBRATION REGISTER 1 */ /* write bits */ -#define SERIAL_IN_BIT 0x1 /* serial data input for eeprom, caldacs, reference dac */ +/* serial data input for eeprom, caldacs, reference dac */ +#define SERIAL_IN_BIT 0x1 #define CAL_CHANNEL_MASK (0x7 << 1) #define CAL_CHANNEL_BITS(channel) (((channel) << 1) & CAL_CHANNEL_MASK) /* read bits */ #define CAL_COUNTER_MASK 0x1f -#define CAL_COUNTER_OVERFLOW_BIT 0x20 /* calibration counter overflow status bit */ -#define AO_BELOW_REF_BIT 0x40 /* analog output is less than reference dac voltage */ +/* calibration counter overflow status bit */ +#define CAL_COUNTER_OVERFLOW_BIT 0x20 +/* analog output is less than reference dac voltage */ +#define AO_BELOW_REF_BIT 0x40 #define SERIAL_OUT_BIT 0x80 /* serial data out, for reading from eeprom */ #define DACALIBRATION2 6 /* D/A CALIBRATION REGISTER 2 */ #define SELECT_EEPROM_BIT 0x1 /* send serial data in to eeprom */ -#define DESELECT_REF_DAC_BIT 0x2 /* don't send serial data to MAX542 reference dac */ -#define DESELECT_CALDAC_BIT(n) (0x4 << (n)) /* don't send serial data to caldac n */ -#define DUMMY_BIT 0x40 /* manual says to set this bit with no explanation */ +/* don't send serial data to MAX542 reference dac */ +#define DESELECT_REF_DAC_BIT 0x2 +/* don't send serial data to caldac n */ +#define DESELECT_CALDAC_BIT(n) (0x4 << (n)) +/* manual says to set this bit with no explanation */ +#define DUMMY_BIT 0x40 #define DADATA 8 /* FIRST D/A DATA REGISTER (0) */ @@ -212,9 +221,12 @@ MODULE_DEVICE_TABLE(pci, cb_pcidda_pci_table); */ #define thisboard ((const struct cb_pcidda_board *)dev->board_ptr) -/* this structure is for data unique to this hardware driver. If - several hardware drivers keep similar information in this structure, - feel free to suggest moving the variable to the struct comedi_device struct. */ +/* + * this structure is for data unique to this hardware driver. If + * several hardware drivers keep similar information in this structure, + * feel free to suggest moving the variable to the struct comedi_device + * struct. + */ struct cb_pcidda_private { int data; @@ -227,8 +239,10 @@ struct cb_pcidda_private { /* unsigned long control_status; */ /* unsigned long adc_fifo; */ - unsigned int dac_cal1_bits; /* bits last written to da calibration register 1 */ - unsigned int ao_range[MAX_AO_CHANNELS]; /* current range settings for output channels */ + /* bits last written to da calibration register 1 */ + unsigned int dac_cal1_bits; + /* current range settings for output channels */ + unsigned int ao_range[MAX_AO_CHANNELS]; u16 eeprom_data[EEPROM_SIZE]; /* software copy of board's eeprom */ }; @@ -377,7 +391,8 @@ found: dev_dbg(dev->hw_dev, "eeprom:\n"); for (index = 0; index < EEPROM_SIZE; index++) { devpriv->eeprom_data[index] = cb_pcidda_read_eeprom(dev, index); - dev_dbg(dev->hw_dev, "%i:0x%x\n", index, devpriv->eeprom_data[index]); + dev_dbg(dev->hw_dev, "%i:0x%x\n", index, + devpriv->eeprom_data[index]); } /* set calibrations dacs */ @@ -484,7 +499,10 @@ static int cb_pcidda_ai_cmdtest(struct comedi_device *dev, if (err) return 1; - /* step 2: make sure trigger sources are unique and mutually compatible */ + /* + * step 2: make sure trigger sources are unique and mutually + * compatible + */ /* note that mutual compatibility is not an issue here */ if (cmd->scan_begin_src != TRIG_TIMER @@ -696,8 +714,10 @@ static unsigned int cb_pcidda_read_eeprom(struct comedi_device *dev, unsigned int i; unsigned int cal2_bits; unsigned int value; - const int max_num_caldacs = 4; /* one caldac for every two dac channels */ - const int read_instruction = 0x6; /* bits to send to tell eeprom we want to read */ + /* one caldac for every two dac channels */ + const int max_num_caldacs = 4; + /* bits to send to tell eeprom we want to read */ + const int read_instruction = 0x6; const int instruction_length = 3; const int address_length = 8; @@ -729,9 +749,11 @@ static void cb_pcidda_write_caldac(struct comedi_device *dev, { unsigned int cal2_bits; unsigned int i; - const int num_channel_bits = 3; /* caldacs use 3 bit channel specification */ + /* caldacs use 3 bit channel specification */ + const int num_channel_bits = 3; const int num_caldac_bits = 8; /* 8 bit calibration dacs */ - const int max_num_caldacs = 4; /* one caldac for every two dac channels */ + /* one caldac for every two dac channels */ + const int max_num_caldacs = 4; /* write 3 bit channel */ cb_pcidda_serial_out(dev, channel, num_channel_bits); @@ -790,14 +812,20 @@ static unsigned int offset_eeprom_address(unsigned int ao_channel, return 0x7 + 2 * range + 12 * ao_channel; } -/* returns eeprom address that provides gain calibration for given ao channel and range */ +/* + * returns eeprom address that provides gain calibration for given ao + * channel and range + */ static unsigned int gain_eeprom_address(unsigned int ao_channel, unsigned int range) { return 0x8 + 2 * range + 12 * ao_channel; } -/* returns upper byte of eeprom entry, which gives the coarse adjustment values */ +/* + * returns upper byte of eeprom entry, which gives the coarse adjustment + * values + */ static unsigned int eeprom_coarse_byte(unsigned int word) { return (word >> 8) & 0xff; @@ -815,7 +843,7 @@ static void cb_pcidda_calibrate(struct comedi_device *dev, unsigned int channel, { unsigned int coarse_offset, fine_offset, coarse_gain, fine_gain; - /* remember range so we can tell when we need to readjust calibration */ + /* remember range so we can tell when we need to readjust calibration */ devpriv->ao_range[channel] = range; /* get values from eeprom data */ @@ -850,7 +878,7 @@ static void cb_pcidda_calibrate(struct comedi_device *dev, unsigned int channel, static int __devinit driver_cb_pcidda_pci_probe(struct pci_dev *dev, const struct pci_device_id *ent) { - return comedi_pci_auto_config(dev, driver_cb_pcidda.driver_name); + return comedi_pci_auto_config(dev, &driver_cb_pcidda); } static void __devexit driver_cb_pcidda_pci_remove(struct pci_dev *dev) diff --git a/drivers/staging/comedi/drivers/cb_pcidio.c b/drivers/staging/comedi/drivers/cb_pcidio.c index 8f3215239a1..3758af7fd80 100644 --- a/drivers/staging/comedi/drivers/cb_pcidio.c +++ b/drivers/staging/comedi/drivers/cb_pcidio.c @@ -293,7 +293,7 @@ static int pcidio_detach(struct comedi_device *dev) static int __devinit driver_cb_pcidio_pci_probe(struct pci_dev *dev, const struct pci_device_id *ent) { - return comedi_pci_auto_config(dev, driver_cb_pcidio.driver_name); + return comedi_pci_auto_config(dev, &driver_cb_pcidio); } static void __devexit driver_cb_pcidio_pci_remove(struct pci_dev *dev) diff --git a/drivers/staging/comedi/drivers/cb_pcimdas.c b/drivers/staging/comedi/drivers/cb_pcimdas.c index 8ba694263bd..842d99db00d 100644 --- a/drivers/staging/comedi/drivers/cb_pcimdas.c +++ b/drivers/staging/comedi/drivers/cb_pcimdas.c @@ -139,9 +139,12 @@ MODULE_DEVICE_TABLE(pci, cb_pcimdas_pci_table); */ #define thisboard ((const struct cb_pcimdas_board *)dev->board_ptr) -/* this structure is for data unique to this hardware driver. If - several hardware drivers keep similar information in this structure, - feel free to suggest moving the variable to the struct comedi_device struct. */ +/* + * this structure is for data unique to this hardware driver. If + * several hardware drivers keep similar information in this structure, + * feel free to suggest moving the variable to the struct comedi_device + * struct. + */ struct cb_pcimdas_private { int data; @@ -317,7 +320,8 @@ found: s->subdev_flags = SDF_WRITABLE; s->n_chan = thisboard->ao_nchan; s->maxdata = 1 << thisboard->ao_bits; - s->range_table = &range_unknown; /* ranges are hardware settable, but not software readable. */ + /* ranges are hardware settable, but not software readable. */ + s->range_table = &range_unknown; s->insn_write = &cb_pcimdas_ao_winsn; s->insn_read = &cb_pcimdas_ao_rinsn; @@ -402,7 +406,10 @@ static int cb_pcimdas_ai_rinsn(struct comedi_device *dev, outb(0x01, devpriv->BADR3 + 6); /* set bursting off, conversions on */ outb(0x00, devpriv->BADR3 + 7); /* set range to 10V. UP/BP is controlled by a switch on the board */ - /* write channel limits to multiplexer, set Low (bits 0-3) and High (bits 4-7) channels to chan. */ + /* + * write channel limits to multiplexer, set Low (bits 0-3) and + * High (bits 4-7) channels to chan. + */ chanlims = chan | (chan << 4); outb(chanlims, devpriv->BADR3 + 0); @@ -487,7 +494,7 @@ static int __devinit driver_cb_pcimdas_pci_probe(struct pci_dev *dev, const struct pci_device_id *ent) { - return comedi_pci_auto_config(dev, driver_cb_pcimdas.driver_name); + return comedi_pci_auto_config(dev, &driver_cb_pcimdas); } static void __devexit driver_cb_pcimdas_pci_remove(struct pci_dev *dev) diff --git a/drivers/staging/comedi/drivers/cb_pcimdda.c b/drivers/staging/comedi/drivers/cb_pcimdda.c index 40bddfa2222..8d1081e9a79 100644 --- a/drivers/staging/comedi/drivers/cb_pcimdda.c +++ b/drivers/staging/comedi/drivers/cb_pcimdda.c @@ -201,7 +201,7 @@ static int __devinit cb_pcimdda_driver_pci_probe(struct pci_dev *dev, const struct pci_device_id *ent) { - return comedi_pci_auto_config(dev, cb_pcimdda_driver.driver_name); + return comedi_pci_auto_config(dev, &cb_pcimdda_driver); } static void __devexit cb_pcimdda_driver_pci_remove(struct pci_dev *dev) diff --git a/drivers/staging/comedi/drivers/contec_pci_dio.c b/drivers/staging/comedi/drivers/contec_pci_dio.c index e3659bd6e85..621e8afb6d4 100644 --- a/drivers/staging/comedi/drivers/contec_pci_dio.c +++ b/drivers/staging/comedi/drivers/contec_pci_dio.c @@ -231,7 +231,7 @@ static int contec_di_insn_bits(struct comedi_device *dev, static int __devinit driver_contec_pci_probe(struct pci_dev *dev, const struct pci_device_id *ent) { - return comedi_pci_auto_config(dev, driver_contec.driver_name); + return comedi_pci_auto_config(dev, &driver_contec); } static void __devexit driver_contec_pci_remove(struct pci_dev *dev) diff --git a/drivers/staging/comedi/drivers/daqboard2000.c b/drivers/staging/comedi/drivers/daqboard2000.c index e61c6a8f285..480f418b28c 100644 --- a/drivers/staging/comedi/drivers/daqboard2000.c +++ b/drivers/staging/comedi/drivers/daqboard2000.c @@ -321,7 +321,6 @@ static const struct daq200_boardtype boardtypes[] = { {"ids4", DAQBOARD2000_SUBSYSTEM_IDS4}, }; -#define n_boardtypes (sizeof(boardtypes)/sizeof(struct daq200_boardtype)) #define this_board ((const struct daq200_boardtype *)dev->board_ptr) static DEFINE_PCI_DEVICE_TABLE(daqboard2000_pci_table) = { @@ -412,9 +411,12 @@ static int daqboard2000_ai_insn_read(struct comedi_device *dev, DAQBOARD2000_AcqResetScanListFifo | DAQBOARD2000_AcqResetResultsFifo | DAQBOARD2000_AcqResetConfigPipe; - /* If pacer clock is not set to some high value (> 10 us), we - risk multiple samples to be put into the result FIFO. */ - fpga->acqPacerClockDivLow = 1000000; /* 1 second, should be long enough */ + /* + * If pacer clock is not set to some high value (> 10 us), we + * risk multiple samples to be put into the result FIFO. + */ + /* 1 second, should be long enough */ + fpga->acqPacerClockDivLow = 1000000; fpga->acqPacerClockDivHigh = 0; gain = CR_RANGE(insn->chanspec); @@ -761,7 +763,7 @@ static int daqboard2000_attach(struct comedi_device *dev, devpriv->pci_dev = card; id = ((u32) card-> subsystem_device << 16) | card->subsystem_vendor; - for (i = 0; i < n_boardtypes; i++) { + for (i = 0; i < ARRAY_SIZE(boardtypes); i++) { if (boardtypes[i].id == id) { dev_dbg(dev->hw_dev, "%s\n", boardtypes[i].name); @@ -878,7 +880,7 @@ static int __devinit driver_daqboard2000_pci_probe(struct pci_dev *dev, const struct pci_device_id *ent) { - return comedi_pci_auto_config(dev, driver_daqboard2000.driver_name); + return comedi_pci_auto_config(dev, &driver_daqboard2000); } static void __devexit driver_daqboard2000_pci_remove(struct pci_dev *dev) diff --git a/drivers/staging/comedi/drivers/das08.c b/drivers/staging/comedi/drivers/das08.c index c2dd0ed36a7..575c5cc3117 100644 --- a/drivers/staging/comedi/drivers/das08.c +++ b/drivers/staging/comedi/drivers/das08.c @@ -61,6 +61,20 @@ #define DRV_NAME "das08" +#ifdef CONFIG_COMEDI_DAS08_ISA_MODULE +#define CONFIG_COMEDI_DAS08_ISA +#endif +#ifdef CONFIG_COMEDI_DAS08_PCI_MODULE +#define CONFIG_COMEDI_DAS08_PCI +#endif +#ifdef CONFIG_COMEDI_DAS08_CS_MODULE +#define CONFIG_COMEDI_DAS08_CS +#endif + +#if defined(CONFIG_COMEDI_DAS08_ISA) || defined(CONFIG_COMEDI_DAS08_PCI) +#define DO_COMEDI_DRIVER_REGISTER +#endif + #define PCI_VENDOR_ID_COMPUTERBOARDS 0x1307 #define PCI_DEVICE_ID_PCIDAS08 0x29 #define PCIDAS08_SIZE 0x54 @@ -160,6 +174,7 @@ static int das08_di_rbits(struct comedi_device *dev, struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data); static int das08_do_wbits(struct comedi_device *dev, struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data); +#ifdef CONFIG_COMEDI_DAS08_ISA static int das08jr_di_rbits(struct comedi_device *dev, struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data); @@ -172,6 +187,7 @@ static int das08jr_ao_winsn(struct comedi_device *dev, static int das08ao_ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data); +#endif static void i8254_set_mode_low(unsigned int base, int channel, unsigned int mode); @@ -253,7 +269,9 @@ static const int *const das08_gainlists[] = { das08_pgm_gainlist, }; +#ifdef DO_COMEDI_DRIVER_REGISTER static const struct das08_board_struct das08_boards[] = { +#ifdef CONFIG_COMEDI_DAS08_ISA { .name = "isa-das08", /* cio-das08.pdf */ .bustype = isa, @@ -395,25 +413,6 @@ static const struct das08_board_struct das08_boards[] = { .i8254_offset = 0x04, .iosize = 16, /* unchecked */ }, -#ifdef CONFIG_COMEDI_PCI - { - .name = "das08", /* pci-das08 */ - .id = PCI_DEVICE_ID_PCIDAS08, - .bustype = pci, - .ai = das08_ai_rinsn, - .ai_nbits = 12, - .ai_pg = das08_bipolar5, - .ai_encoding = das08_encode12, - .ao = NULL, - .ao_nbits = 0, - .di = das08_di_rbits, - .do_ = das08_do_wbits, - .do_nchan = 4, - .i8255_offset = 0, - .i8254_offset = 4, - .iosize = 8, - }, -#endif { .name = "pc104-das08", .bustype = pc104, @@ -462,9 +461,30 @@ static const struct das08_board_struct das08_boards[] = { .name = "das08-pga-g2", /* a KM board */ }, #endif +#endif /* CONFIG_COMEDI_DAS08_ISA */ +#ifdef CONFIG_COMEDI_DAS08_PCI + { + .name = "das08", /* pci-das08 */ + .id = PCI_DEVICE_ID_PCIDAS08, + .bustype = pci, + .ai = das08_ai_rinsn, + .ai_nbits = 12, + .ai_pg = das08_bipolar5, + .ai_encoding = das08_encode12, + .ao = NULL, + .ao_nbits = 0, + .di = das08_di_rbits, + .do_ = das08_do_wbits, + .do_nchan = 4, + .i8255_offset = 0, + .i8254_offset = 4, + .iosize = 8, + }, +#endif /* CONFIG_COMEDI_DAS08_PCI */ }; +#endif /* DO_COMEDI_DRIVER_REGISTER */ -#ifdef CONFIG_COMEDI_PCMCIA +#ifdef CONFIG_COMEDI_DAS08_CS struct das08_board_struct das08_cs_boards[NUM_DAS08_CS_BOARDS] = { { .name = "pcm-das08", @@ -504,7 +524,7 @@ struct das08_board_struct das08_cs_boards[NUM_DAS08_CS_BOARDS] = { }; #endif -#ifdef CONFIG_COMEDI_PCI +#ifdef CONFIG_COMEDI_DAS08_PCI static DEFINE_PCI_DEVICE_TABLE(das08_pci_table) = { { PCI_DEVICE(PCI_VENDOR_ID_COMPUTERBOARDS, PCI_DEVICE_ID_PCIDAS08) }, {0} @@ -619,6 +639,7 @@ static int das08_do_wbits(struct comedi_device *dev, struct comedi_subdevice *s, return 2; } +#ifdef CONFIG_COMEDI_DAS08_ISA static int das08jr_di_rbits(struct comedi_device *dev, struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data) @@ -628,7 +649,9 @@ static int das08jr_di_rbits(struct comedi_device *dev, return 2; } +#endif +#ifdef CONFIG_COMEDI_DAS08_ISA static int das08jr_do_wbits(struct comedi_device *dev, struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data) @@ -643,7 +666,9 @@ static int das08jr_do_wbits(struct comedi_device *dev, return 2; } +#endif +#ifdef CONFIG_COMEDI_DAS08_ISA static int das08jr_ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data) @@ -672,6 +697,7 @@ static int das08jr_ao_winsn(struct comedi_device *dev, return n; } +#endif /* * @@ -679,6 +705,7 @@ static int das08jr_ao_winsn(struct comedi_device *dev, * a different method to force an update. * */ +#ifdef CONFIG_COMEDI_DAS08_ISA static int das08ao_ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data) @@ -707,6 +734,7 @@ static int das08ao_ao_winsn(struct comedi_device *dev, return n; } +#endif static unsigned int i8254_read_channel_low(unsigned int base, int chan) { @@ -842,6 +870,7 @@ static int das08_counter_config(struct comedi_device *dev, return 2; } +#ifdef DO_COMEDI_DRIVER_REGISTER static int das08_attach(struct comedi_device *dev, struct comedi_devconfig *it); static struct comedi_driver driver_das08 = { @@ -853,6 +882,7 @@ static struct comedi_driver driver_das08 = { .num_names = sizeof(das08_boards) / sizeof(struct das08_board_struct), .offset = sizeof(struct das08_board_struct), }; +#endif int das08_common_attach(struct comedi_device *dev, unsigned long iobase) { @@ -972,11 +1002,12 @@ int das08_common_attach(struct comedi_device *dev, unsigned long iobase) } EXPORT_SYMBOL_GPL(das08_common_attach); +#ifdef DO_COMEDI_DRIVER_REGISTER static int das08_attach(struct comedi_device *dev, struct comedi_devconfig *it) { int ret; unsigned long iobase; -#ifdef CONFIG_COMEDI_PCI +#ifdef CONFIG_COMEDI_DAS08_PCI unsigned long pci_iobase = 0; struct pci_dev *pdev = NULL; #endif @@ -986,9 +1017,9 @@ static int das08_attach(struct comedi_device *dev, struct comedi_devconfig *it) return ret; printk(KERN_INFO "comedi%d: das08: ", dev->minor); +#ifdef CONFIG_COMEDI_DAS08_PCI /* deal with a pci board */ if (thisboard->bustype == pci) { -#ifdef CONFIG_COMEDI_PCI if (it->options[0] || it->options[1]) { printk("bus %i slot %i ", it->options[0], it->options[1]); @@ -1037,17 +1068,16 @@ static int das08_attach(struct comedi_device *dev, struct comedi_devconfig *it) /* Enable local interrupt 1 and pci interrupt */ outw(INTR1_ENABLE | PCI_INTR_ENABLE, pci_iobase + INTCSR); #endif -#else /* CONFIG_COMEDI_PCI */ - printk(KERN_ERR "this driver has not been built with PCI support.\n"); - return -EINVAL; -#endif /* CONFIG_COMEDI_PCI */ - } else { + } else +#endif /* CONFIG_COMEDI_DAS08_PCI */ + { iobase = it->options[0]; } printk(KERN_INFO "\n"); return das08_common_attach(dev, iobase); } +#endif /* DO_COMEDI_DRIVER_REGISTER */ int das08_common_detach(struct comedi_device *dev) @@ -1062,7 +1092,7 @@ int das08_common_detach(struct comedi_device *dev) if (dev->iobase) release_region(dev->iobase, thisboard->iosize); } -#ifdef CONFIG_COMEDI_PCI +#ifdef CONFIG_COMEDI_DAS08_PCI if (devpriv) { if (devpriv->pdev) { if (devpriv->pci_iobase) @@ -1077,11 +1107,11 @@ int das08_common_detach(struct comedi_device *dev) } EXPORT_SYMBOL_GPL(das08_common_detach); -#ifdef CONFIG_COMEDI_PCI +#ifdef CONFIG_COMEDI_DAS08_PCI static int __devinit driver_das08_pci_probe(struct pci_dev *dev, const struct pci_device_id *ent) { - return comedi_pci_auto_config(dev, driver_das08.driver_name); + return comedi_pci_auto_config(dev, &driver_das08); } static void __devexit driver_das08_pci_remove(struct pci_dev *dev) @@ -1094,43 +1124,38 @@ static struct pci_driver driver_das08_pci_driver = { .probe = &driver_das08_pci_probe, .remove = __devexit_p(&driver_das08_pci_remove) }; +#endif /* CONFIG_COMEDI_DAS08_PCI */ static int __init driver_das08_init_module(void) { - int retval; + int retval = 0; +#ifdef DO_COMEDI_DRIVER_REGISTER retval = comedi_driver_register(&driver_das08); if (retval < 0) return retval; - +#endif +#ifdef CONFIG_COMEDI_DAS08_PCI driver_das08_pci_driver.name = (char *)driver_das08.driver_name; - return pci_register_driver(&driver_das08_pci_driver); + retval = pci_register_driver(&driver_das08_pci_driver); +#endif + return retval; } static void __exit driver_das08_cleanup_module(void) { +#ifdef CONFIG_COMEDI_DAS08_PCI pci_unregister_driver(&driver_das08_pci_driver); +#endif +#ifdef DO_COMEDI_DRIVER_REGISTER comedi_driver_unregister(&driver_das08); +#endif } module_init(driver_das08_init_module); module_exit(driver_das08_cleanup_module); -#else -static int __init driver_das08_init_module(void) -{ - return comedi_driver_register(&driver_das08); -} - -static void __exit driver_das08_cleanup_module(void) -{ - comedi_driver_unregister(&driver_das08); -} - -module_init(driver_das08_init_module); -module_exit(driver_das08_cleanup_module); -#endif -#ifdef CONFIG_COMEDI_PCMCIA +#ifdef CONFIG_COMEDI_DAS08_CS EXPORT_SYMBOL_GPL(das08_cs_boards); #endif diff --git a/drivers/staging/comedi/drivers/dt2815.c b/drivers/staging/comedi/drivers/dt2815.c index 4155da43fd5..f5a0dc501c6 100644 --- a/drivers/staging/comedi/drivers/dt2815.c +++ b/drivers/staging/comedi/drivers/dt2815.c @@ -72,31 +72,6 @@ static const struct comedi_lrange #define DT2815_DATA 0 #define DT2815_STATUS 1 -static int dt2815_attach(struct comedi_device *dev, - struct comedi_devconfig *it); -static int dt2815_detach(struct comedi_device *dev); -static struct comedi_driver driver_dt2815 = { - .driver_name = "dt2815", - .module = THIS_MODULE, - .attach = dt2815_attach, - .detach = dt2815_detach, -}; - -static int __init driver_dt2815_init_module(void) -{ - return comedi_driver_register(&driver_dt2815); -} - -static void __exit driver_dt2815_cleanup_module(void) -{ - comedi_driver_unregister(&driver_dt2815); -} - -module_init(driver_dt2815_init_module); -module_exit(driver_dt2815_cleanup_module); - -static void dt2815_free_resources(struct comedi_device *dev); - struct dt2815_private { const struct comedi_lrange *range_type_list[8]; @@ -267,6 +242,25 @@ static int dt2815_detach(struct comedi_device *dev) return 0; } +static struct comedi_driver driver_dt2815 = { + .driver_name = "dt2815", + .module = THIS_MODULE, + .attach = dt2815_attach, + .detach = dt2815_detach, +}; + +static int __init driver_dt2815_init_module(void) +{ + return comedi_driver_register(&driver_dt2815); +} +module_init(driver_dt2815_init_module); + +static void __exit driver_dt2815_cleanup_module(void) +{ + comedi_driver_unregister(&driver_dt2815); +} +module_exit(driver_dt2815_cleanup_module); + MODULE_AUTHOR("Comedi http://www.comedi.org"); MODULE_DESCRIPTION("Comedi low-level driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/staging/comedi/drivers/dt2817.c b/drivers/staging/comedi/drivers/dt2817.c index 99c1584153d..45d9a829620 100644 --- a/drivers/staging/comedi/drivers/dt2817.c +++ b/drivers/staging/comedi/drivers/dt2817.c @@ -47,29 +47,6 @@ Configuration options: #define DT2817_CR 0 #define DT2817_DATA 1 -static int dt2817_attach(struct comedi_device *dev, - struct comedi_devconfig *it); -static int dt2817_detach(struct comedi_device *dev); -static struct comedi_driver driver_dt2817 = { - .driver_name = "dt2817", - .module = THIS_MODULE, - .attach = dt2817_attach, - .detach = dt2817_detach, -}; - -static int __init driver_dt2817_init_module(void) -{ - return comedi_driver_register(&driver_dt2817); -} - -static void __exit driver_dt2817_cleanup_module(void) -{ - comedi_driver_unregister(&driver_dt2817); -} - -module_init(driver_dt2817_init_module); -module_exit(driver_dt2817_cleanup_module); - static int dt2817_dio_insn_config(struct comedi_device *dev, struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data) @@ -192,6 +169,25 @@ static int dt2817_detach(struct comedi_device *dev) return 0; } +static struct comedi_driver driver_dt2817 = { + .driver_name = "dt2817", + .module = THIS_MODULE, + .attach = dt2817_attach, + .detach = dt2817_detach, +}; + +static int __init driver_dt2817_init_module(void) +{ + return comedi_driver_register(&driver_dt2817); +} +module_init(driver_dt2817_init_module); + +static void __exit driver_dt2817_cleanup_module(void) +{ + comedi_driver_unregister(&driver_dt2817); +} +module_exit(driver_dt2817_cleanup_module); + MODULE_AUTHOR("Comedi http://www.comedi.org"); MODULE_DESCRIPTION("Comedi low-level driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/staging/comedi/drivers/dt282x.c b/drivers/staging/comedi/drivers/dt282x.c index 95ebc267bb7..210b3f0f6f0 100644 --- a/drivers/staging/comedi/drivers/dt282x.c +++ b/drivers/staging/comedi/drivers/dt282x.c @@ -350,7 +350,6 @@ static const struct dt282x_board boardtypes[] = { }, }; -#define n_boardtypes (sizeof(boardtypes)/sizeof(struct dt282x_board)) #define this_board ((const struct dt282x_board *)dev->board_ptr) struct dt282x_private { @@ -420,7 +419,7 @@ static struct comedi_driver driver_dt282x = { .attach = dt282x_attach, .detach = dt282x_detach, .board_name = &boardtypes[0].name, - .num_names = n_boardtypes, + .num_names = ARRAY_SIZE(boardtypes), .offset = sizeof(struct dt282x_board), }; diff --git a/drivers/staging/comedi/drivers/dt3000.c b/drivers/staging/comedi/drivers/dt3000.c index 0a7979e5299..d44c89d11ab 100644 --- a/drivers/staging/comedi/drivers/dt3000.c +++ b/drivers/staging/comedi/drivers/dt3000.c @@ -289,7 +289,7 @@ static struct comedi_driver driver_dt3000 = { static int __devinit driver_dt3000_pci_probe(struct pci_dev *dev, const struct pci_device_id *ent) { - return comedi_pci_auto_config(dev, driver_dt3000.driver_name); + return comedi_pci_auto_config(dev, &driver_dt3000); } static void __devexit driver_dt3000_pci_remove(struct pci_dev *dev) diff --git a/drivers/staging/comedi/drivers/dt9812.c b/drivers/staging/comedi/drivers/dt9812.c index e86ab586289..cd3a44a0bfc 100644 --- a/drivers/staging/comedi/drivers/dt9812.c +++ b/drivers/staging/comedi/drivers/dt9812.c @@ -196,7 +196,7 @@ struct dt9812_flash_data { }; #define DT9812_MAX_NUM_MULTI_BYTE_RDS \ - ((DT9812_MAX_WRITE_CMD_PIPE_SIZE - 4 - 1) / sizeof(u8)) + ((DT9812_MAX_WRITE_CMD_PIPE_SIZE - 4 - 1) / sizeof(u8)) struct dt9812_read_multi { u8 count; @@ -209,8 +209,8 @@ struct dt9812_write_byte { }; #define DT9812_MAX_NUM_MULTI_BYTE_WRTS \ - ((DT9812_MAX_WRITE_CMD_PIPE_SIZE - 4 - 1) / \ - sizeof(struct dt9812_write_byte)) + ((DT9812_MAX_WRITE_CMD_PIPE_SIZE - 4 - 1) / \ + sizeof(struct dt9812_write_byte)) struct dt9812_write_multi { u8 count; @@ -224,7 +224,8 @@ struct dt9812_rmw_byte { }; #define DT9812_MAX_NUM_MULTI_BYTE_RMWS \ - ((DT9812_MAX_WRITE_CMD_PIPE_SIZE - 4 - 1) / sizeof(struct dt9812_rmw_byte)) + ((DT9812_MAX_WRITE_CMD_PIPE_SIZE - 4 - 1) / \ + sizeof(struct dt9812_rmw_byte)) struct dt9812_rmw_multi { u8 count; @@ -365,7 +366,7 @@ static int dt9812_read_info(struct usb_dt9812 *dev, int offset, void *buf, } static int dt9812_read_multiple_registers(struct usb_dt9812 *dev, int reg_count, - u8 * address, u8 * value) + u8 *address, u8 *value) { struct dt9812_usb_cmd cmd; int i, count, retval; @@ -391,8 +392,8 @@ static int dt9812_read_multiple_registers(struct usb_dt9812 *dev, int reg_count, } static int dt9812_write_multiple_registers(struct usb_dt9812 *dev, - int reg_count, u8 * address, - u8 * value) + int reg_count, u8 *address, + u8 *value) { struct dt9812_usb_cmd cmd; int i, count, retval; @@ -430,7 +431,7 @@ static int dt9812_rmw_multiple_registers(struct usb_dt9812 *dev, int reg_count, return retval; } -static int dt9812_digital_in(struct slot_dt9812 *slot, u8 * bits) +static int dt9812_digital_in(struct slot_dt9812 *slot, u8 *bits) { int result = -ENODEV; @@ -476,7 +477,7 @@ static int dt9812_digital_out(struct slot_dt9812 *slot, u8 bits) return result; } -static int dt9812_digital_out_shadow(struct slot_dt9812 *slot, u8 * bits) +static int dt9812_digital_out_shadow(struct slot_dt9812 *slot, u8 *bits) { int result = -ENODEV; @@ -547,12 +548,12 @@ static void dt9812_configure_gain(struct usb_dt9812 *dev, rmw->or_value = F020_MASK_ADC0CF_AMP0GN2; break; default: - err("Illegal gain %d\n", gain); + dev_err(&dev->interface->dev, "Illegal gain %d\n", gain); } } -static int dt9812_analog_in(struct slot_dt9812 *slot, int channel, u16 * value, +static int dt9812_analog_in(struct slot_dt9812 *slot, int channel, u16 *value, enum dt9812_gain gain) { struct dt9812_rmw_byte rmw[3]; @@ -619,7 +620,7 @@ exit: } static int dt9812_analog_out_shadow(struct slot_dt9812 *slot, int channel, - u16 * value) + u16 *value) { int result = -ENODEV; @@ -715,7 +716,7 @@ static int dt9812_probe(struct usb_interface *interface, iface_desc = interface->cur_altsetting; if (iface_desc->desc.bNumEndpoints != 5) { - err("Wrong number of endpints."); + dev_err(&interface->dev, "Wrong number of endpoints.\n"); retval = -ENODEV; goto error; } @@ -781,22 +782,22 @@ static int dt9812_probe(struct usb_interface *interface, } if (dt9812_read_info(dev, 1, &dev->vendor, sizeof(dev->vendor)) != 0) { - err("Failed to read vendor."); + dev_err(&interface->dev, "Failed to read vendor.\n"); retval = -ENODEV; goto error; } if (dt9812_read_info(dev, 3, &dev->product, sizeof(dev->product)) != 0) { - err("Failed to read product."); + dev_err(&interface->dev, "Failed to read product.\n"); retval = -ENODEV; goto error; } if (dt9812_read_info(dev, 5, &dev->device, sizeof(dev->device)) != 0) { - err("Failed to read device."); + dev_err(&interface->dev, "Failed to read device.\n"); retval = -ENODEV; goto error; } if (dt9812_read_info(dev, 7, &dev->serial, sizeof(dev->serial)) != 0) { - err("Failed to read serial."); + dev_err(&interface->dev, "Failed to read serial.\n"); retval = -ENODEV; goto error; } @@ -1146,7 +1147,9 @@ static int __init usb_dt9812_init(void) result = comedi_driver_register(&dt9812_comedi_driver); if (result) { usb_deregister(&dt9812_usb_driver); - err("comedi_driver_register failed. Error number %d", result); + printk(KERN_ERR KBUILD_MODNAME + ": comedi_driver_register failed. Error number %d\n", + result); } return result; diff --git a/drivers/staging/comedi/drivers/dyna_pci10xx.c b/drivers/staging/comedi/drivers/dyna_pci10xx.c index da8a2bf3165..f54e7ffb749 100644 --- a/drivers/staging/comedi/drivers/dyna_pci10xx.c +++ b/drivers/staging/comedi/drivers/dyna_pci10xx.c @@ -421,7 +421,7 @@ static int dyna_pci10xx_detach(struct comedi_device *dev) static int __devinit driver_dyna_pci10xx_pci_probe(struct pci_dev *dev, const struct pci_device_id *ent) { - return comedi_pci_auto_config(dev, driver_dyna_pci10xx.driver_name); + return comedi_pci_auto_config(dev, &driver_dyna_pci10xx); } static void __devexit driver_dyna_pci10xx_pci_remove(struct pci_dev *dev) diff --git a/drivers/staging/comedi/drivers/fl512.c b/drivers/staging/comedi/drivers/fl512.c index 7f49add60b2..88c18ea36e1 100644 --- a/drivers/staging/comedi/drivers/fl512.c +++ b/drivers/staging/comedi/drivers/fl512.c @@ -42,38 +42,6 @@ static const struct comedi_lrange range_fl512 = { 4, { } }; -static int fl512_attach(struct comedi_device *dev, struct comedi_devconfig *it); -static int fl512_detach(struct comedi_device *dev); - -static struct comedi_driver driver_fl512 = { - .driver_name = "fl512", - .module = THIS_MODULE, - .attach = fl512_attach, - .detach = fl512_detach, -}; - -static int __init driver_fl512_init_module(void) -{ - return comedi_driver_register(&driver_fl512); -} - -static void __exit driver_fl512_cleanup_module(void) -{ - comedi_driver_unregister(&driver_fl512); -} - -module_init(driver_fl512_init_module); -module_exit(driver_fl512_cleanup_module); - -static int fl512_ai_insn(struct comedi_device *dev, - struct comedi_subdevice *s, struct comedi_insn *insn, - unsigned int *data); -static int fl512_ao_insn(struct comedi_device *dev, struct comedi_subdevice *s, - struct comedi_insn *insn, unsigned int *data); -static int fl512_ao_insn_readback(struct comedi_device *dev, - struct comedi_subdevice *s, - struct comedi_insn *insn, unsigned int *data); - /* * fl512_ai_insn : this is the analog input function */ @@ -140,9 +108,6 @@ static int fl512_ao_insn_readback(struct comedi_device *dev, return n; } -/* - * start attach - */ static int fl512_attach(struct comedi_device *dev, struct comedi_devconfig *it) { unsigned long iobase; @@ -217,6 +182,25 @@ static int fl512_detach(struct comedi_device *dev) return 0; } +static struct comedi_driver driver_fl512 = { + .driver_name = "fl512", + .module = THIS_MODULE, + .attach = fl512_attach, + .detach = fl512_detach, +}; + +static int __init driver_fl512_init_module(void) +{ + return comedi_driver_register(&driver_fl512); +} +module_init(driver_fl512_init_module); + +static void __exit driver_fl512_cleanup_module(void) +{ + comedi_driver_unregister(&driver_fl512); +} +module_exit(driver_fl512_cleanup_module); + MODULE_AUTHOR("Comedi http://www.comedi.org"); MODULE_DESCRIPTION("Comedi low-level driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/staging/comedi/drivers/gsc_hpdi.c b/drivers/staging/comedi/drivers/gsc_hpdi.c index bc020dea141..a7b9f6e1e11 100644 --- a/drivers/staging/comedi/drivers/gsc_hpdi.c +++ b/drivers/staging/comedi/drivers/gsc_hpdi.c @@ -348,7 +348,7 @@ static struct comedi_driver driver_hpdi = { static int __devinit driver_hpdi_pci_probe(struct pci_dev *dev, const struct pci_device_id *ent) { - return comedi_pci_auto_config(dev, driver_hpdi.driver_name); + return comedi_pci_auto_config(dev, &driver_hpdi); } static void __devexit driver_hpdi_pci_remove(struct pci_dev *dev) diff --git a/drivers/staging/comedi/drivers/icp_multi.c b/drivers/staging/comedi/drivers/icp_multi.c index 126550f3c02..67b6f5aa188 100644 --- a/drivers/staging/comedi/drivers/icp_multi.c +++ b/drivers/staging/comedi/drivers/icp_multi.c @@ -173,14 +173,12 @@ static const struct boardtype boardtypes[] = { &range_analog}, /* Rangelist for D/A */ }; -#define n_boardtypes (sizeof(boardtypes)/sizeof(struct boardtype)) - static struct comedi_driver driver_icp_multi = { .driver_name = "icp_multi", .module = THIS_MODULE, .attach = icp_multi_attach, .detach = icp_multi_detach, - .num_names = n_boardtypes, + .num_names = ARRAY_SIZE(boardtypes), .board_name = &boardtypes[0].name, .offset = sizeof(struct boardtype), }; diff --git a/drivers/staging/comedi/drivers/jr3_pci.c b/drivers/staging/comedi/drivers/jr3_pci.c index 6a79ba10630..114885d0616 100644 --- a/drivers/staging/comedi/drivers/jr3_pci.c +++ b/drivers/staging/comedi/drivers/jr3_pci.c @@ -977,7 +977,7 @@ static int jr3_pci_detach(struct comedi_device *dev) static int __devinit driver_jr3_pci_pci_probe(struct pci_dev *dev, const struct pci_device_id *ent) { - return comedi_pci_auto_config(dev, driver_jr3_pci.driver_name); + return comedi_pci_auto_config(dev, &driver_jr3_pci); } static void __devexit driver_jr3_pci_pci_remove(struct pci_dev *dev) diff --git a/drivers/staging/comedi/drivers/ke_counter.c b/drivers/staging/comedi/drivers/ke_counter.c index 4e9e9a07865..0db76a50292 100644 --- a/drivers/staging/comedi/drivers/ke_counter.c +++ b/drivers/staging/comedi/drivers/ke_counter.c @@ -46,18 +46,6 @@ Kolter Electronic PCI Counter Card. #define PCI_VENDOR_ID_KOLTER 0x1001 #define CNT_CARD_DEVICE_ID 0x0014 -/*-- function prototypes ----------------------------------------------------*/ - -static int cnt_attach(struct comedi_device *dev, struct comedi_devconfig *it); -static int cnt_detach(struct comedi_device *dev); - -static DEFINE_PCI_DEVICE_TABLE(cnt_pci_table) = { - { PCI_DEVICE(PCI_VENDOR_ID_KOLTER, CNT_CARD_DEVICE_ID) }, - {0} -}; - -MODULE_DEVICE_TABLE(pci, cnt_pci_table); - /*-- board specification structure ------------------------------------------*/ struct cnt_board_struct { @@ -87,51 +75,6 @@ struct cnt_device_private { #define devpriv ((struct cnt_device_private *)dev->private) -static struct comedi_driver cnt_driver = { - .driver_name = CNT_DRIVER_NAME, - .module = THIS_MODULE, - .attach = cnt_attach, - .detach = cnt_detach, -}; - -static int __devinit cnt_driver_pci_probe(struct pci_dev *dev, - const struct pci_device_id *ent) -{ - return comedi_pci_auto_config(dev, cnt_driver.driver_name); -} - -static void __devexit cnt_driver_pci_remove(struct pci_dev *dev) -{ - comedi_pci_auto_unconfig(dev); -} - -static struct pci_driver cnt_driver_pci_driver = { - .id_table = cnt_pci_table, - .probe = &cnt_driver_pci_probe, - .remove = __devexit_p(&cnt_driver_pci_remove) -}; - -static int __init cnt_driver_init_module(void) -{ - int retval; - - retval = comedi_driver_register(&cnt_driver); - if (retval < 0) - return retval; - - cnt_driver_pci_driver.name = (char *)cnt_driver.driver_name; - return pci_register_driver(&cnt_driver_pci_driver); -} - -static void __exit cnt_driver_cleanup_module(void) -{ - pci_unregister_driver(&cnt_driver_pci_driver); - comedi_driver_unregister(&cnt_driver); -} - -module_init(cnt_driver_init_module); -module_exit(cnt_driver_cleanup_module); - /*-- counter write ----------------------------------------------------------*/ /* This should be used only for resetting the counters; maybe it is better @@ -181,8 +124,6 @@ static int cnt_rinsn(struct comedi_device *dev, return 1; } -/*-- attach -----------------------------------------------------------------*/ - static int cnt_attach(struct comedi_device *dev, struct comedi_devconfig *it) { struct comedi_subdevice *subdevice; @@ -278,8 +219,6 @@ found: return 0; } -/*-- detach -----------------------------------------------------------------*/ - static int cnt_detach(struct comedi_device *dev) { if (devpriv && devpriv->pcidev) { @@ -292,6 +231,56 @@ static int cnt_detach(struct comedi_device *dev) return 0; } +static struct comedi_driver cnt_driver = { + .driver_name = CNT_DRIVER_NAME, + .module = THIS_MODULE, + .attach = cnt_attach, + .detach = cnt_detach, +}; + +static int __devinit cnt_driver_pci_probe(struct pci_dev *dev, + const struct pci_device_id *ent) +{ + return comedi_pci_auto_config(dev, &cnt_driver); +} + +static void __devexit cnt_driver_pci_remove(struct pci_dev *dev) +{ + comedi_pci_auto_unconfig(dev); +} + +static DEFINE_PCI_DEVICE_TABLE(cnt_pci_table) = { + { PCI_DEVICE(PCI_VENDOR_ID_KOLTER, CNT_CARD_DEVICE_ID) }, + { 0 } +}; +MODULE_DEVICE_TABLE(pci, cnt_pci_table); + +static struct pci_driver cnt_driver_pci_driver = { + .id_table = cnt_pci_table, + .probe = cnt_driver_pci_probe, + .remove = __devexit_p(cnt_driver_pci_remove), +}; + +static int __init cnt_driver_init_module(void) +{ + int retval; + + retval = comedi_driver_register(&cnt_driver); + if (retval < 0) + return retval; + + cnt_driver_pci_driver.name = (char *)cnt_driver.driver_name; + return pci_register_driver(&cnt_driver_pci_driver); +} +module_init(cnt_driver_init_module); + +static void __exit cnt_driver_cleanup_module(void) +{ + pci_unregister_driver(&cnt_driver_pci_driver); + comedi_driver_unregister(&cnt_driver); +} +module_exit(cnt_driver_cleanup_module); + MODULE_AUTHOR("Comedi http://www.comedi.org"); MODULE_DESCRIPTION("Comedi low-level driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/staging/comedi/drivers/me4000.c b/drivers/staging/comedi/drivers/me4000.c index b0bc6bb877a..54bcacc3a1e 100644 --- a/drivers/staging/comedi/drivers/me4000.c +++ b/drivers/staging/comedi/drivers/me4000.c @@ -2427,7 +2427,7 @@ static int me4000_cnt_insn_write(struct comedi_device *dev, static int __devinit driver_me4000_pci_probe(struct pci_dev *dev, const struct pci_device_id *ent) { - return comedi_pci_auto_config(dev, driver_me4000.driver_name); + return comedi_pci_auto_config(dev, &driver_me4000); } static void __devexit driver_me4000_pci_remove(struct pci_dev *dev) diff --git a/drivers/staging/comedi/drivers/me_daq.c b/drivers/staging/comedi/drivers/me_daq.c index 8b812e41c52..e286dcb21d1 100644 --- a/drivers/staging/comedi/drivers/me_daq.c +++ b/drivers/staging/comedi/drivers/me_daq.c @@ -257,7 +257,7 @@ static struct comedi_driver me_driver = { static int __devinit me_driver_pci_probe(struct pci_dev *dev, const struct pci_device_id *ent) { - return comedi_pci_auto_config(dev, me_driver.driver_name); + return comedi_pci_auto_config(dev, &me_driver); } static void __devexit me_driver_pci_remove(struct pci_dev *dev) diff --git a/drivers/staging/comedi/drivers/ni_6527.c b/drivers/staging/comedi/drivers/ni_6527.c index 54741c9e1af..75c146d75f3 100644 --- a/drivers/staging/comedi/drivers/ni_6527.c +++ b/drivers/staging/comedi/drivers/ni_6527.c @@ -493,7 +493,7 @@ static int ni6527_find_device(struct comedi_device *dev, int bus, int slot) static int __devinit driver_ni6527_pci_probe(struct pci_dev *dev, const struct pci_device_id *ent) { - return comedi_pci_auto_config(dev, driver_ni6527.driver_name); + return comedi_pci_auto_config(dev, &driver_ni6527); } static void __devexit driver_ni6527_pci_remove(struct pci_dev *dev) diff --git a/drivers/staging/comedi/drivers/ni_65xx.c b/drivers/staging/comedi/drivers/ni_65xx.c index 403fc0997d3..4a3f54ed3ce 100644 --- a/drivers/staging/comedi/drivers/ni_65xx.c +++ b/drivers/staging/comedi/drivers/ni_65xx.c @@ -837,7 +837,7 @@ static int ni_65xx_find_device(struct comedi_device *dev, int bus, int slot) static int __devinit driver_ni_65xx_pci_probe(struct pci_dev *dev, const struct pci_device_id *ent) { - return comedi_pci_auto_config(dev, driver_ni_65xx.driver_name); + return comedi_pci_auto_config(dev, &driver_ni_65xx); } static void __devexit driver_ni_65xx_pci_remove(struct pci_dev *dev) diff --git a/drivers/staging/comedi/drivers/ni_660x.c b/drivers/staging/comedi/drivers/ni_660x.c index 35f3a474982..eea7047f6ea 100644 --- a/drivers/staging/comedi/drivers/ni_660x.c +++ b/drivers/staging/comedi/drivers/ni_660x.c @@ -474,7 +474,7 @@ static struct comedi_driver driver_ni_660x = { static int __devinit driver_ni_660x_pci_probe(struct pci_dev *dev, const struct pci_device_id *ent) { - return comedi_pci_auto_config(dev, driver_ni_660x.driver_name); + return comedi_pci_auto_config(dev, &driver_ni_660x); } static void __devexit driver_ni_660x_pci_remove(struct pci_dev *dev) diff --git a/drivers/staging/comedi/drivers/ni_670x.c b/drivers/staging/comedi/drivers/ni_670x.c index d8d91f90060..c74efc40679 100644 --- a/drivers/staging/comedi/drivers/ni_670x.c +++ b/drivers/staging/comedi/drivers/ni_670x.c @@ -123,7 +123,7 @@ static struct comedi_driver driver_ni_670x = { static int __devinit driver_ni_670x_pci_probe(struct pci_dev *dev, const struct pci_device_id *ent) { - return comedi_pci_auto_config(dev, driver_ni_670x.driver_name); + return comedi_pci_auto_config(dev, &driver_ni_670x); } static void __devexit driver_ni_670x_pci_remove(struct pci_dev *dev) diff --git a/drivers/staging/comedi/drivers/ni_at_a2150.c b/drivers/staging/comedi/drivers/ni_at_a2150.c index c25e44c1905..4fc469da45e 100644 --- a/drivers/staging/comedi/drivers/ni_at_a2150.c +++ b/drivers/staging/comedi/drivers/ni_at_a2150.c @@ -539,7 +539,10 @@ static int a2150_ai_cmdtest(struct comedi_device *dev, if (err) return 1; - /* step 2: make sure trigger sources are unique and mutually compatible */ + /* + * step 2: make sure trigger sources are unique and mutually + * compatible + */ if (cmd->start_src != TRIG_NOW && cmd->start_src != TRIG_EXT) err++; @@ -771,7 +774,10 @@ static int a2150_ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s, /* start acquisition for soft trigger */ outw(0, dev->iobase + FIFO_START_REG); - /* there is a 35.6 sample delay for data to get through the antialias filter */ + /* + * there is a 35.6 sample delay for data to get through the + * antialias filter + */ for (n = 0; n < filter_delay; n++) { for (i = 0; i < timeout; i++) { if (inw(dev->iobase + STATUS_REG) & FNE_BIT) @@ -812,8 +818,10 @@ static int a2150_ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s, return n; } -/* sets bits in devpriv->clock_bits to nearest approximation of requested period, - * adjusts requested period to actual timing. */ +/* + * sets bits in devpriv->clock_bits to nearest approximation of requested + * period, adjusts requested period to actual timing. + */ static int a2150_get_timing(struct comedi_device *dev, unsigned int *period, int flags) { diff --git a/drivers/staging/comedi/drivers/ni_labpc.c b/drivers/staging/comedi/drivers/ni_labpc.c index 721b2be2250..b281fc6e6b7 100644 --- a/drivers/staging/comedi/drivers/ni_labpc.c +++ b/drivers/staging/comedi/drivers/ni_labpc.c @@ -2141,7 +2141,7 @@ static void write_caldac(struct comedi_device *dev, unsigned int channel, static int __devinit driver_labpc_pci_probe(struct pci_dev *dev, const struct pci_device_id *ent) { - return comedi_pci_auto_config(dev, driver_labpc.driver_name); + return comedi_pci_auto_config(dev, &driver_labpc); } static void __devexit driver_labpc_pci_remove(struct pci_dev *dev) diff --git a/drivers/staging/comedi/drivers/ni_pcidio.c b/drivers/staging/comedi/drivers/ni_pcidio.c index 1df8fcbcd10..64528413cf9 100644 --- a/drivers/staging/comedi/drivers/ni_pcidio.c +++ b/drivers/staging/comedi/drivers/ni_pcidio.c @@ -1359,7 +1359,7 @@ static int nidio_find_device(struct comedi_device *dev, int bus, int slot) static int __devinit driver_pcidio_pci_probe(struct pci_dev *dev, const struct pci_device_id *ent) { - return comedi_pci_auto_config(dev, driver_pcidio.driver_name); + return comedi_pci_auto_config(dev, &driver_pcidio); } static void __devexit driver_pcidio_pci_remove(struct pci_dev *dev) diff --git a/drivers/staging/comedi/drivers/ni_pcimio.c b/drivers/staging/comedi/drivers/ni_pcimio.c index 27baefa32b1..1065b2cbcc5 100644 --- a/drivers/staging/comedi/drivers/ni_pcimio.c +++ b/drivers/staging/comedi/drivers/ni_pcimio.c @@ -1263,7 +1263,7 @@ static struct comedi_driver driver_pcimio = { static int __devinit driver_pcimio_pci_probe(struct pci_dev *dev, const struct pci_device_id *ent) { - return comedi_pci_auto_config(dev, driver_pcimio.driver_name); + return comedi_pci_auto_config(dev, &driver_pcimio); } static void __devexit driver_pcimio_pci_remove(struct pci_dev *dev) diff --git a/drivers/staging/comedi/drivers/ni_tio_internal.h b/drivers/staging/comedi/drivers/ni_tio_internal.h index c4ca5378583..5e00212aa02 100644 --- a/drivers/staging/comedi/drivers/ni_tio_internal.h +++ b/drivers/staging/comedi/drivers/ni_tio_internal.h @@ -362,8 +362,8 @@ static inline enum ni_gpct_register NITIO_Gi_ABZ_Reg(int counter_index) return 0; } -static inline enum ni_gpct_register NITIO_Gi_Interrupt_Acknowledge_Reg(int - counter_index) +static inline enum ni_gpct_register NITIO_Gi_Interrupt_Acknowledge_Reg( + int counter_index) { switch (counter_index) { case 0: @@ -407,8 +407,8 @@ static inline enum ni_gpct_register NITIO_Gi_Status_Reg(int counter_index) return 0; } -static inline enum ni_gpct_register NITIO_Gi_Interrupt_Enable_Reg(int - counter_index) +static inline enum ni_gpct_register NITIO_Gi_Interrupt_Enable_Reg( + int counter_index) { switch (counter_index) { case 0: @@ -472,15 +472,22 @@ enum Gi_Counting_Mode_Reg_Bits { Gi_Index_Phase_LowA_HighB = 0x1 << Gi_Index_Phase_Bitshift, Gi_Index_Phase_HighA_LowB = 0x2 << Gi_Index_Phase_Bitshift, Gi_Index_Phase_HighA_HighB = 0x3 << Gi_Index_Phase_Bitshift, - Gi_HW_Arm_Enable_Bit = 0x80, /* from m-series example code, not documented in 660x register level manual */ - Gi_660x_HW_Arm_Select_Mask = 0x7 << Gi_HW_Arm_Select_Shift, /* from m-series example code, not documented in 660x register level manual */ + /* from m-series example code, not documented in 660x register level + * manual */ + Gi_HW_Arm_Enable_Bit = 0x80, + /* from m-series example code, not documented in 660x register level + * manual */ + Gi_660x_HW_Arm_Select_Mask = 0x7 << Gi_HW_Arm_Select_Shift, Gi_660x_Prescale_X8_Bit = 0x1000, Gi_M_Series_Prescale_X8_Bit = 0x2000, Gi_M_Series_HW_Arm_Select_Mask = 0x1f << Gi_HW_Arm_Select_Shift, - /* must be set for clocks over 40MHz, which includes synchronous counting and quadrature modes */ + /* must be set for clocks over 40MHz, which includes synchronous + * counting and quadrature modes */ Gi_660x_Alternate_Sync_Bit = 0x2000, Gi_M_Series_Alternate_Sync_Bit = 0x4000, - Gi_660x_Prescale_X2_Bit = 0x4000, /* from m-series example code, not documented in 660x register level manual */ + /* from m-series example code, not documented in 660x register level + * manual */ + Gi_660x_Prescale_X2_Bit = 0x4000, Gi_M_Series_Prescale_X2_Bit = 0x8000, }; @@ -503,7 +510,8 @@ enum Gi_Mode_Bits { Gi_Level_Gating_Bits = 0x1, Gi_Rising_Edge_Gating_Bits = 0x2, Gi_Falling_Edge_Gating_Bits = 0x3, - Gi_Gate_On_Both_Edges_Bit = 0x4, /* used in conjunction with rising edge gating mode */ + Gi_Gate_On_Both_Edges_Bit = 0x4, /* used in conjunction with + * rising edge gating mode */ Gi_Trigger_Mode_for_Edge_Gate_Mask = 0x18, Gi_Edge_Gate_Starts_Stops_Bits = 0x0, Gi_Edge_Gate_Stops_Starts_Bits = 0x8, @@ -686,11 +694,10 @@ static inline unsigned Gi_Gate_Interrupt_Enable_Bit(unsigned counter_index) { unsigned bit; - if (counter_index % 2) { + if (counter_index % 2) bit = G1_Gate_Interrupt_Enable_Bit; - } else { + else bit = G0_Gate_Interrupt_Enable_Bit; - } return bit; } @@ -748,8 +755,9 @@ static inline void ni_tio_set_bits_transient(struct ni_gpct *counter, } /* ni_tio_set_bits( ) is for safely writing to registers whose bits may be -twiddled in interrupt context, or whose software copy may be read in interrupt context. -*/ + * twiddled in interrupt context, or whose software copy may be read in + * interrupt context. + */ static inline void ni_tio_set_bits(struct ni_gpct *counter, enum ni_gpct_register register_index, unsigned bit_mask, unsigned bit_values) diff --git a/drivers/staging/comedi/drivers/pcl711.c b/drivers/staging/comedi/drivers/pcl711.c index b44386a6b63..fcb7cea761a 100644 --- a/drivers/staging/comedi/drivers/pcl711.c +++ b/drivers/staging/comedi/drivers/pcl711.c @@ -148,42 +148,8 @@ struct pcl711_board { const struct comedi_lrange *ai_range_type; }; -static const struct pcl711_board boardtypes[] = { - {"pcl711", 0, 0, 0, 5, 8, 1, 0, &range_bipolar5}, - {"pcl711b", 1, 0, 0, 5, 8, 1, 7, &range_pcl711b_ai}, - {"acl8112hg", 0, 1, 0, 12, 16, 2, 15, &range_acl8112hg_ai}, - {"acl8112dg", 0, 1, 1, 9, 16, 2, 15, &range_acl8112dg_ai}, -}; - -#define n_boardtypes (sizeof(boardtypes)/sizeof(struct pcl711_board)) #define this_board ((const struct pcl711_board *)dev->board_ptr) -static int pcl711_attach(struct comedi_device *dev, - struct comedi_devconfig *it); -static int pcl711_detach(struct comedi_device *dev); -static struct comedi_driver driver_pcl711 = { - .driver_name = "pcl711", - .module = THIS_MODULE, - .attach = pcl711_attach, - .detach = pcl711_detach, - .board_name = &boardtypes[0].name, - .num_names = n_boardtypes, - .offset = sizeof(struct pcl711_board), -}; - -static int __init driver_pcl711_init_module(void) -{ - return comedi_driver_register(&driver_pcl711); -} - -static void __exit driver_pcl711_cleanup_module(void) -{ - comedi_driver_unregister(&driver_pcl711); -} - -module_init(driver_pcl711_init_module); -module_exit(driver_pcl711_cleanup_module); - struct pcl711_private { int board; @@ -513,21 +479,6 @@ static int pcl711_do_insn_bits(struct comedi_device *dev, return 2; } -/* Free any resources that we have claimed */ -static int pcl711_detach(struct comedi_device *dev) -{ - printk(KERN_INFO "comedi%d: pcl711: remove\n", dev->minor); - - if (dev->irq) - free_irq(dev->irq, dev); - - if (dev->iobase) - release_region(dev->iobase, PCL711_SIZE); - - return 0; -} - -/* Initialization */ static int pcl711_attach(struct comedi_device *dev, struct comedi_devconfig *it) { int ret; @@ -640,6 +591,48 @@ static int pcl711_attach(struct comedi_device *dev, struct comedi_devconfig *it) return 0; } +static int pcl711_detach(struct comedi_device *dev) +{ + printk(KERN_INFO "comedi%d: pcl711: remove\n", dev->minor); + + if (dev->irq) + free_irq(dev->irq, dev); + + if (dev->iobase) + release_region(dev->iobase, PCL711_SIZE); + + return 0; +} + +static const struct pcl711_board boardtypes[] = { + { "pcl711", 0, 0, 0, 5, 8, 1, 0, &range_bipolar5 }, + { "pcl711b", 1, 0, 0, 5, 8, 1, 7, &range_pcl711b_ai }, + { "acl8112hg", 0, 1, 0, 12, 16, 2, 15, &range_acl8112hg_ai }, + { "acl8112dg", 0, 1, 1, 9, 16, 2, 15, &range_acl8112dg_ai }, +}; + +static struct comedi_driver driver_pcl711 = { + .driver_name = "pcl711", + .module = THIS_MODULE, + .attach = pcl711_attach, + .detach = pcl711_detach, + .board_name = &boardtypes[0].name, + .num_names = ARRAY_SIZE(boardtypes), + .offset = sizeof(struct pcl711_board), +}; + +static int __init driver_pcl711_init_module(void) +{ + return comedi_driver_register(&driver_pcl711); +} +module_init(driver_pcl711_init_module); + +static void __exit driver_pcl711_cleanup_module(void) +{ + comedi_driver_unregister(&driver_pcl711); +} +module_exit(driver_pcl711_cleanup_module); + MODULE_AUTHOR("Comedi http://www.comedi.org"); MODULE_DESCRIPTION("Comedi low-level driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/staging/comedi/drivers/pcl724.c b/drivers/staging/comedi/drivers/pcl724.c index 61b075db66e..7d0a306ccaa 100644 --- a/drivers/staging/comedi/drivers/pcl724.c +++ b/drivers/staging/comedi/drivers/pcl724.c @@ -56,10 +56,6 @@ See the source for configuration details. /* #define PCL724_IRQ 1 no IRQ support now */ -static int pcl724_attach(struct comedi_device *dev, - struct comedi_devconfig *it); -static int pcl724_detach(struct comedi_device *dev); - struct pcl724_board { const char *name; /* board name */ @@ -71,41 +67,8 @@ struct pcl724_board { char is_pet48; }; -static const struct pcl724_board boardtypes[] = { - {"pcl724", 24, 1, 0x00fc, PCL724_SIZE, 0, 0,}, - {"pcl722", 144, 6, 0x00fc, PCL722_SIZE, 1, 0,}, - {"pcl731", 48, 2, 0x9cfc, PCL731_SIZE, 0, 0,}, - {"acl7122", 144, 6, 0x9ee8, PCL722_SIZE, 1, 0,}, - {"acl7124", 24, 1, 0x00fc, PCL724_SIZE, 0, 0,}, - {"pet48dio", 48, 2, 0x9eb8, PET48_SIZE, 0, 1,}, -}; - -#define n_boardtypes (sizeof(boardtypes)/sizeof(struct pcl724_board)) #define this_board ((const struct pcl724_board *)dev->board_ptr) -static struct comedi_driver driver_pcl724 = { - .driver_name = "pcl724", - .module = THIS_MODULE, - .attach = pcl724_attach, - .detach = pcl724_detach, - .board_name = &boardtypes[0].name, - .num_names = n_boardtypes, - .offset = sizeof(struct pcl724_board), -}; - -static int __init driver_pcl724_init_module(void) -{ - return comedi_driver_register(&driver_pcl724); -} - -static void __exit driver_pcl724_cleanup_module(void) -{ - comedi_driver_unregister(&driver_pcl724); -} - -module_init(driver_pcl724_init_module); -module_exit(driver_pcl724_cleanup_module); - static int subdev_8255_cb(int dir, int port, int data, unsigned long arg) { unsigned long iobase = arg; @@ -233,6 +196,37 @@ static int pcl724_detach(struct comedi_device *dev) return 0; } +static const struct pcl724_board boardtypes[] = { + { "pcl724", 24, 1, 0x00fc, PCL724_SIZE, 0, 0, }, + { "pcl722", 144, 6, 0x00fc, PCL722_SIZE, 1, 0, }, + { "pcl731", 48, 2, 0x9cfc, PCL731_SIZE, 0, 0, }, + { "acl7122", 144, 6, 0x9ee8, PCL722_SIZE, 1, 0, }, + { "acl7124", 24, 1, 0x00fc, PCL724_SIZE, 0, 0, }, + { "pet48dio", 48, 2, 0x9eb8, PET48_SIZE, 0, 1, }, +}; + +static struct comedi_driver driver_pcl724 = { + .driver_name = "pcl724", + .module = THIS_MODULE, + .attach = pcl724_attach, + .detach = pcl724_detach, + .board_name = &boardtypes[0].name, + .num_names = ARRAY_SIZE(boardtypes), + .offset = sizeof(struct pcl724_board), +}; + +static int __init driver_pcl724_init_module(void) +{ + return comedi_driver_register(&driver_pcl724); +} +module_init(driver_pcl724_init_module); + +static void __exit driver_pcl724_cleanup_module(void) +{ + comedi_driver_unregister(&driver_pcl724); +} +module_exit(driver_pcl724_cleanup_module); + MODULE_AUTHOR("Comedi http://www.comedi.org"); MODULE_DESCRIPTION("Comedi low-level driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/staging/comedi/drivers/pcl725.c b/drivers/staging/comedi/drivers/pcl725.c index 24b223ca439..4b761a67ac1 100644 --- a/drivers/staging/comedi/drivers/pcl725.c +++ b/drivers/staging/comedi/drivers/pcl725.c @@ -20,29 +20,6 @@ Devices: [Advantech] PCL-725 (pcl725) #define PCL725_DO 0 #define PCL725_DI 1 -static int pcl725_attach(struct comedi_device *dev, - struct comedi_devconfig *it); -static int pcl725_detach(struct comedi_device *dev); -static struct comedi_driver driver_pcl725 = { - .driver_name = "pcl725", - .module = THIS_MODULE, - .attach = pcl725_attach, - .detach = pcl725_detach, -}; - -static int __init driver_pcl725_init_module(void) -{ - return comedi_driver_register(&driver_pcl725); -} - -static void __exit driver_pcl725_cleanup_module(void) -{ - comedi_driver_unregister(&driver_pcl725); -} - -module_init(driver_pcl725_init_module); -module_exit(driver_pcl725_cleanup_module); - static int pcl725_do_insn(struct comedi_device *dev, struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data) { @@ -122,6 +99,25 @@ static int pcl725_detach(struct comedi_device *dev) return 0; } +static struct comedi_driver driver_pcl725 = { + .driver_name = "pcl725", + .module = THIS_MODULE, + .attach = pcl725_attach, + .detach = pcl725_detach, +}; + +static int __init driver_pcl725_init_module(void) +{ + return comedi_driver_register(&driver_pcl725); +} +module_init(driver_pcl725_init_module); + +static void __exit driver_pcl725_cleanup_module(void) +{ + comedi_driver_unregister(&driver_pcl725); +} +module_exit(driver_pcl725_cleanup_module); + MODULE_AUTHOR("Comedi http://www.comedi.org"); MODULE_DESCRIPTION("Comedi low-level driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/staging/comedi/drivers/pcl726.c b/drivers/staging/comedi/drivers/pcl726.c index 897cd808eeb..c63e91c2bca 100644 --- a/drivers/staging/comedi/drivers/pcl726.c +++ b/drivers/staging/comedi/drivers/pcl726.c @@ -111,10 +111,6 @@ static const struct comedi_lrange *const rangelist_728[] = { &range_4_20mA, &range_0_20mA }; -static int pcl726_attach(struct comedi_device *dev, - struct comedi_devconfig *it); -static int pcl726_detach(struct comedi_device *dev); - struct pcl726_board { const char *name; /* driver name */ @@ -149,32 +145,8 @@ static const struct pcl726_board boardtypes[] = { &rangelist_728[0],}, }; -#define n_boardtypes (sizeof(boardtypes)/sizeof(struct pcl726_board)) #define this_board ((const struct pcl726_board *)dev->board_ptr) -static struct comedi_driver driver_pcl726 = { - .driver_name = "pcl726", - .module = THIS_MODULE, - .attach = pcl726_attach, - .detach = pcl726_detach, - .board_name = &boardtypes[0].name, - .num_names = n_boardtypes, - .offset = sizeof(struct pcl726_board), -}; - -static int __init driver_pcl726_init_module(void) -{ - return comedi_driver_register(&driver_pcl726); -} - -static void __exit driver_pcl726_cleanup_module(void) -{ - comedi_driver_unregister(&driver_pcl726); -} - -module_init(driver_pcl726_init_module); -module_exit(driver_pcl726_cleanup_module); - struct pcl726_private { int bipolar[12]; @@ -393,6 +365,28 @@ static int pcl726_detach(struct comedi_device *dev) return 0; } +static struct comedi_driver driver_pcl726 = { + .driver_name = "pcl726", + .module = THIS_MODULE, + .attach = pcl726_attach, + .detach = pcl726_detach, + .board_name = &boardtypes[0].name, + .num_names = ARRAY_SIZE(boardtypes), + .offset = sizeof(struct pcl726_board), +}; + +static int __init driver_pcl726_init_module(void) +{ + return comedi_driver_register(&driver_pcl726); +} +module_init(driver_pcl726_init_module); + +static void __exit driver_pcl726_cleanup_module(void) +{ + comedi_driver_unregister(&driver_pcl726); +} +module_exit(driver_pcl726_cleanup_module); + MODULE_AUTHOR("Comedi http://www.comedi.org"); MODULE_DESCRIPTION("Comedi low-level driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/staging/comedi/drivers/pcl730.c b/drivers/staging/comedi/drivers/pcl730.c index c9682d614e0..f6fa8aeab91 100644 --- a/drivers/staging/comedi/drivers/pcl730.c +++ b/drivers/staging/comedi/drivers/pcl730.c @@ -26,48 +26,14 @@ The ACL-7130 card have an 8254 timer/counter not supported by this driver. #define PCL730_DIO_LO 2 /* TTL Digital I/O low byte (D0-D7) */ #define PCL730_DIO_HI 3 /* TTL Digital I/O high byte (D8-D15) */ -static int pcl730_attach(struct comedi_device *dev, - struct comedi_devconfig *it); -static int pcl730_detach(struct comedi_device *dev); - struct pcl730_board { const char *name; /* board name */ unsigned int io_range; /* len of I/O space */ }; -static const struct pcl730_board boardtypes[] = { - {"pcl730", PCL730_SIZE,}, - {"iso730", PCL730_SIZE,}, - {"acl7130", ACL7130_SIZE,}, -}; - -#define n_boardtypes (sizeof(boardtypes)/sizeof(struct pcl730_board)) #define this_board ((const struct pcl730_board *)dev->board_ptr) -static struct comedi_driver driver_pcl730 = { - .driver_name = "pcl730", - .module = THIS_MODULE, - .attach = pcl730_attach, - .detach = pcl730_detach, - .board_name = &boardtypes[0].name, - .num_names = n_boardtypes, - .offset = sizeof(struct pcl730_board), -}; - -static int __init driver_pcl730_init_module(void) -{ - return comedi_driver_register(&driver_pcl730); -} - -static void __exit driver_pcl730_cleanup_module(void) -{ - comedi_driver_unregister(&driver_pcl730); -} - -module_init(driver_pcl730_init_module); -module_exit(driver_pcl730_cleanup_module); - static int pcl730_do_insn(struct comedi_device *dev, struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data) { @@ -178,6 +144,34 @@ static int pcl730_detach(struct comedi_device *dev) return 0; } +static const struct pcl730_board boardtypes[] = { + { "pcl730", PCL730_SIZE, }, + { "iso730", PCL730_SIZE, }, + { "acl7130", ACL7130_SIZE, }, +}; + +static struct comedi_driver driver_pcl730 = { + .driver_name = "pcl730", + .module = THIS_MODULE, + .attach = pcl730_attach, + .detach = pcl730_detach, + .board_name = &boardtypes[0].name, + .num_names = ARRAY_SIZE(boardtypes), + .offset = sizeof(struct pcl730_board), +}; + +static int __init driver_pcl730_init_module(void) +{ + return comedi_driver_register(&driver_pcl730); +} +module_init(driver_pcl730_init_module); + +static void __exit driver_pcl730_cleanup_module(void) +{ + comedi_driver_unregister(&driver_pcl730); +} +module_exit(driver_pcl730_cleanup_module); + MODULE_AUTHOR("Comedi http://www.comedi.org"); MODULE_DESCRIPTION("Comedi low-level driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/staging/comedi/drivers/pcl812.c b/drivers/staging/comedi/drivers/pcl812.c index 6fc74645af2..85463e275e5 100644 --- a/drivers/staging/comedi/drivers/pcl812.c +++ b/drivers/staging/comedi/drivers/pcl812.c @@ -316,10 +316,6 @@ static const struct comedi_lrange range_a821pgh_ai = { 4, { } }; -static int pcl812_attach(struct comedi_device *dev, - struct comedi_devconfig *it); -static int pcl812_detach(struct comedi_device *dev); - struct pcl812_board { const char *name; /* board name */ @@ -340,89 +336,8 @@ struct pcl812_board { unsigned char haveMPC508; /* 1=board use MPC508A multiplexor */ }; -static const struct pcl812_board boardtypes[] = { - {"pcl812", boardPCL812, 16, 0, 2, 16, 16, 0x0fff, - 33000, 500, &range_bipolar10, &range_unipolar5, - 0xdcfc, 0x0a, PCLx1x_IORANGE, 0}, - {"pcl812pg", boardPCL812PG, 16, 0, 2, 16, 16, 0x0fff, - 33000, 500, &range_pcl812pg_ai, &range_unipolar5, - 0xdcfc, 0x0a, PCLx1x_IORANGE, 0}, - {"acl8112pg", boardPCL812PG, 16, 0, 2, 16, 16, 0x0fff, - 10000, 500, &range_pcl812pg_ai, &range_unipolar5, - 0xdcfc, 0x0a, PCLx1x_IORANGE, 0}, - {"acl8112dg", boardACL8112, 16, 8, 2, 16, 16, 0x0fff, - 10000, 500, &range_acl8112dg_ai, &range_unipolar5, - 0xdcfc, 0x0a, PCLx1x_IORANGE, 1}, - {"acl8112hg", boardACL8112, 16, 8, 2, 16, 16, 0x0fff, - 10000, 500, &range_acl8112hg_ai, &range_unipolar5, - 0xdcfc, 0x0a, PCLx1x_IORANGE, 1}, - {"a821pgl", boardA821, 16, 8, 1, 16, 16, 0x0fff, - 10000, 500, &range_pcl813b_ai, &range_unipolar5, - 0x000c, 0x00, PCLx1x_IORANGE, 0}, - {"a821pglnda", boardA821, 16, 8, 0, 0, 0, 0x0fff, - 10000, 500, &range_pcl813b_ai, NULL, - 0x000c, 0x00, PCLx1x_IORANGE, 0}, - {"a821pgh", boardA821, 16, 8, 1, 16, 16, 0x0fff, - 10000, 500, &range_a821pgh_ai, &range_unipolar5, - 0x000c, 0x00, PCLx1x_IORANGE, 0}, - {"a822pgl", boardACL8112, 16, 8, 2, 16, 16, 0x0fff, - 10000, 500, &range_acl8112dg_ai, &range_unipolar5, - 0xdcfc, 0x0a, PCLx1x_IORANGE, 0}, - {"a822pgh", boardACL8112, 16, 8, 2, 16, 16, 0x0fff, - 10000, 500, &range_acl8112hg_ai, &range_unipolar5, - 0xdcfc, 0x0a, PCLx1x_IORANGE, 0}, - {"a823pgl", boardACL8112, 16, 8, 2, 16, 16, 0x0fff, - 8000, 500, &range_acl8112dg_ai, &range_unipolar5, - 0xdcfc, 0x0a, PCLx1x_IORANGE, 0}, - {"a823pgh", boardACL8112, 16, 8, 2, 16, 16, 0x0fff, - 8000, 500, &range_acl8112hg_ai, &range_unipolar5, - 0xdcfc, 0x0a, PCLx1x_IORANGE, 0}, - {"pcl813", boardPCL813, 32, 0, 0, 0, 0, 0x0fff, - 0, 0, &range_pcl813b_ai, NULL, - 0x0000, 0x00, PCLx1x_IORANGE, 0}, - {"pcl813b", boardPCL813B, 32, 0, 0, 0, 0, 0x0fff, - 0, 0, &range_pcl813b_ai, NULL, - 0x0000, 0x00, PCLx1x_IORANGE, 0}, - {"acl8113", boardACL8113, 32, 0, 0, 0, 0, 0x0fff, - 0, 0, &range_acl8113_1_ai, NULL, - 0x0000, 0x00, PCLx1x_IORANGE, 0}, - {"iso813", boardISO813, 32, 0, 0, 0, 0, 0x0fff, - 0, 0, &range_iso813_1_ai, NULL, - 0x0000, 0x00, PCLx1x_IORANGE, 0}, - {"acl8216", boardACL8216, 16, 8, 2, 16, 16, 0xffff, - 10000, 500, &range_pcl813b2_ai, &range_unipolar5, - 0xdcfc, 0x0a, PCLx1x_IORANGE, 1}, - {"a826pg", boardACL8216, 16, 8, 2, 16, 16, 0xffff, - 10000, 500, &range_pcl813b2_ai, &range_unipolar5, - 0xdcfc, 0x0a, PCLx1x_IORANGE, 0}, -}; - -#define n_boardtypes (sizeof(boardtypes)/sizeof(struct pcl812_board)) #define this_board ((const struct pcl812_board *)dev->board_ptr) -static struct comedi_driver driver_pcl812 = { - .driver_name = "pcl812", - .module = THIS_MODULE, - .attach = pcl812_attach, - .detach = pcl812_detach, - .board_name = &boardtypes[0].name, - .num_names = n_boardtypes, - .offset = sizeof(struct pcl812_board), -}; - -static int __init driver_pcl812_init_module(void) -{ - return comedi_driver_register(&driver_pcl812); -} - -static void __exit driver_pcl812_cleanup_module(void) -{ - comedi_driver_unregister(&driver_pcl812); -} - -module_init(driver_pcl812_init_module); -module_exit(driver_pcl812_cleanup_module); - struct pcl812_private { unsigned char valid; /* =1 device is OK */ @@ -1356,9 +1271,6 @@ static void pcl812_reset(struct comedi_device *dev) #endif } -/* -============================================================================== -*/ static int pcl812_attach(struct comedi_device *dev, struct comedi_devconfig *it) { int ret, subdev; @@ -1702,9 +1614,6 @@ no_dma: return 0; } -/* -============================================================================== - */ static int pcl812_detach(struct comedi_device *dev) { @@ -1715,6 +1624,85 @@ static int pcl812_detach(struct comedi_device *dev) return 0; } +static const struct pcl812_board boardtypes[] = { + {"pcl812", boardPCL812, 16, 0, 2, 16, 16, 0x0fff, + 33000, 500, &range_bipolar10, &range_unipolar5, + 0xdcfc, 0x0a, PCLx1x_IORANGE, 0}, + {"pcl812pg", boardPCL812PG, 16, 0, 2, 16, 16, 0x0fff, + 33000, 500, &range_pcl812pg_ai, &range_unipolar5, + 0xdcfc, 0x0a, PCLx1x_IORANGE, 0}, + {"acl8112pg", boardPCL812PG, 16, 0, 2, 16, 16, 0x0fff, + 10000, 500, &range_pcl812pg_ai, &range_unipolar5, + 0xdcfc, 0x0a, PCLx1x_IORANGE, 0}, + {"acl8112dg", boardACL8112, 16, 8, 2, 16, 16, 0x0fff, + 10000, 500, &range_acl8112dg_ai, &range_unipolar5, + 0xdcfc, 0x0a, PCLx1x_IORANGE, 1}, + {"acl8112hg", boardACL8112, 16, 8, 2, 16, 16, 0x0fff, + 10000, 500, &range_acl8112hg_ai, &range_unipolar5, + 0xdcfc, 0x0a, PCLx1x_IORANGE, 1}, + {"a821pgl", boardA821, 16, 8, 1, 16, 16, 0x0fff, + 10000, 500, &range_pcl813b_ai, &range_unipolar5, + 0x000c, 0x00, PCLx1x_IORANGE, 0}, + {"a821pglnda", boardA821, 16, 8, 0, 0, 0, 0x0fff, + 10000, 500, &range_pcl813b_ai, NULL, + 0x000c, 0x00, PCLx1x_IORANGE, 0}, + {"a821pgh", boardA821, 16, 8, 1, 16, 16, 0x0fff, + 10000, 500, &range_a821pgh_ai, &range_unipolar5, + 0x000c, 0x00, PCLx1x_IORANGE, 0}, + {"a822pgl", boardACL8112, 16, 8, 2, 16, 16, 0x0fff, + 10000, 500, &range_acl8112dg_ai, &range_unipolar5, + 0xdcfc, 0x0a, PCLx1x_IORANGE, 0}, + {"a822pgh", boardACL8112, 16, 8, 2, 16, 16, 0x0fff, + 10000, 500, &range_acl8112hg_ai, &range_unipolar5, + 0xdcfc, 0x0a, PCLx1x_IORANGE, 0}, + {"a823pgl", boardACL8112, 16, 8, 2, 16, 16, 0x0fff, + 8000, 500, &range_acl8112dg_ai, &range_unipolar5, + 0xdcfc, 0x0a, PCLx1x_IORANGE, 0}, + {"a823pgh", boardACL8112, 16, 8, 2, 16, 16, 0x0fff, + 8000, 500, &range_acl8112hg_ai, &range_unipolar5, + 0xdcfc, 0x0a, PCLx1x_IORANGE, 0}, + {"pcl813", boardPCL813, 32, 0, 0, 0, 0, 0x0fff, + 0, 0, &range_pcl813b_ai, NULL, + 0x0000, 0x00, PCLx1x_IORANGE, 0}, + {"pcl813b", boardPCL813B, 32, 0, 0, 0, 0, 0x0fff, + 0, 0, &range_pcl813b_ai, NULL, + 0x0000, 0x00, PCLx1x_IORANGE, 0}, + {"acl8113", boardACL8113, 32, 0, 0, 0, 0, 0x0fff, + 0, 0, &range_acl8113_1_ai, NULL, + 0x0000, 0x00, PCLx1x_IORANGE, 0}, + {"iso813", boardISO813, 32, 0, 0, 0, 0, 0x0fff, + 0, 0, &range_iso813_1_ai, NULL, + 0x0000, 0x00, PCLx1x_IORANGE, 0}, + {"acl8216", boardACL8216, 16, 8, 2, 16, 16, 0xffff, + 10000, 500, &range_pcl813b2_ai, &range_unipolar5, + 0xdcfc, 0x0a, PCLx1x_IORANGE, 1}, + {"a826pg", boardACL8216, 16, 8, 2, 16, 16, 0xffff, + 10000, 500, &range_pcl813b2_ai, &range_unipolar5, + 0xdcfc, 0x0a, PCLx1x_IORANGE, 0}, +}; + +static struct comedi_driver driver_pcl812 = { + .driver_name = "pcl812", + .module = THIS_MODULE, + .attach = pcl812_attach, + .detach = pcl812_detach, + .board_name = &boardtypes[0].name, + .num_names = ARRAY_SIZE(boardtypes), + .offset = sizeof(struct pcl812_board), +}; + +static int __init driver_pcl812_init_module(void) +{ + return comedi_driver_register(&driver_pcl812); +} +module_init(driver_pcl812_init_module); + +static void __exit driver_pcl812_cleanup_module(void) +{ + comedi_driver_unregister(&driver_pcl812); +} +module_exit(driver_pcl812_cleanup_module); + MODULE_AUTHOR("Comedi http://www.comedi.org"); MODULE_DESCRIPTION("Comedi low-level driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/staging/comedi/drivers/pcl816.c b/drivers/staging/comedi/drivers/pcl816.c index 96cd7ec2ad5..bccbb236d37 100644 --- a/drivers/staging/comedi/drivers/pcl816.c +++ b/drivers/staging/comedi/drivers/pcl816.c @@ -125,63 +125,14 @@ struct pcl816_board { int i8254_osc_base; /* 1/frequency of on board oscilator in ns */ }; -static const struct pcl816_board boardtypes[] = { - {"pcl816", 8, 16, 10000, 1, 16, 16, &range_pcl816, - &range_pcl816, PCLx1x_RANGE, - 0x00fc, /* IRQ mask */ - 0x0a, /* DMA mask */ - 0xffff, /* 16-bit card */ - 0xffff, /* D/A maxdata */ - 1024, - 1, /* ao chan list */ - 100}, - {"pcl814b", 8, 16, 10000, 1, 16, 16, &range_pcl816, - &range_pcl816, PCLx1x_RANGE, - 0x00fc, - 0x0a, - 0x3fff, /* 14 bit card */ - 0x3fff, - 1024, - 1, - 100}, -}; - -#define n_boardtypes (sizeof(boardtypes)/sizeof(struct pcl816_board)) #define devpriv ((struct pcl816_private *)dev->private) #define this_board ((const struct pcl816_board *)dev->board_ptr) -static int pcl816_attach(struct comedi_device *dev, - struct comedi_devconfig *it); -static int pcl816_detach(struct comedi_device *dev); - #ifdef unused static int RTC_lock; /* RTC lock */ static int RTC_timer_lock; /* RTC int lock */ #endif -static struct comedi_driver driver_pcl816 = { - .driver_name = "pcl816", - .module = THIS_MODULE, - .attach = pcl816_attach, - .detach = pcl816_detach, - .board_name = &boardtypes[0].name, - .num_names = n_boardtypes, - .offset = sizeof(struct pcl816_board), -}; - -static int __init driver_pcl816_init_module(void) -{ - return comedi_driver_register(&driver_pcl816); -} - -static void __exit driver_pcl816_cleanup_module(void) -{ - comedi_driver_unregister(&driver_pcl816); -} - -module_init(driver_pcl816_init_module); -module_exit(driver_pcl816_cleanup_module); - struct pcl816_private { unsigned int dma; /* used DMA, 0=don't use DMA */ @@ -1109,12 +1060,6 @@ static void free_resources(struct comedi_device *dev) /* printk("free_resource() end\n"); */ } -/* -============================================================================== - - Initialization - -*/ static int pcl816_attach(struct comedi_device *dev, struct comedi_devconfig *it) { int ret; @@ -1340,10 +1285,6 @@ case COMEDI_SUBD_DO: return 0; } -/* -============================================================================== - Removes device - */ static int pcl816_detach(struct comedi_device *dev) { DEBUG(printk(KERN_INFO "comedi%d: pcl816: remove\n", dev->minor);) @@ -1355,6 +1296,49 @@ static int pcl816_detach(struct comedi_device *dev) return 0; } +static const struct pcl816_board boardtypes[] = { + {"pcl816", 8, 16, 10000, 1, 16, 16, &range_pcl816, + &range_pcl816, PCLx1x_RANGE, + 0x00fc, /* IRQ mask */ + 0x0a, /* DMA mask */ + 0xffff, /* 16-bit card */ + 0xffff, /* D/A maxdata */ + 1024, + 1, /* ao chan list */ + 100}, + {"pcl814b", 8, 16, 10000, 1, 16, 16, &range_pcl816, + &range_pcl816, PCLx1x_RANGE, + 0x00fc, + 0x0a, + 0x3fff, /* 14 bit card */ + 0x3fff, + 1024, + 1, + 100}, +}; + +static struct comedi_driver driver_pcl816 = { + .driver_name = "pcl816", + .module = THIS_MODULE, + .attach = pcl816_attach, + .detach = pcl816_detach, + .board_name = &boardtypes[0].name, + .num_names = ARRAY_SIZE(boardtypes), + .offset = sizeof(struct pcl816_board), +}; + +static int __init driver_pcl816_init_module(void) +{ + return comedi_driver_register(&driver_pcl816); +} +module_init(driver_pcl816_init_module); + +static void __exit driver_pcl816_cleanup_module(void) +{ + comedi_driver_unregister(&driver_pcl816); +} +module_exit(driver_pcl816_cleanup_module); + MODULE_AUTHOR("Comedi http://www.comedi.org"); MODULE_DESCRIPTION("Comedi low-level driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/staging/comedi/drivers/pcl818.c b/drivers/staging/comedi/drivers/pcl818.c index 7344a53a81c..8dbefc51b2f 100644 --- a/drivers/staging/comedi/drivers/pcl818.c +++ b/drivers/staging/comedi/drivers/pcl818.c @@ -247,10 +247,6 @@ static const struct comedi_lrange range718_bipolar0_5 = static const struct comedi_lrange range718_unipolar2 = { 1, {UNI_RANGE(2),} }; static const struct comedi_lrange range718_unipolar1 = { 1, {BIP_RANGE(1),} }; -static int pcl818_attach(struct comedi_device *dev, - struct comedi_devconfig *it); -static int pcl818_detach(struct comedi_device *dev); - #ifdef unused static int RTC_lock; /* RTC lock */ static int RTC_timer_lock; /* RTC int lock */ @@ -277,56 +273,6 @@ struct pcl818_board { int is_818; }; -static const struct pcl818_board boardtypes[] = { - {"pcl818l", 4, 16, 8, 25000, 1, 16, 16, &range_pcl818l_l_ai, - &range_unipolar5, PCLx1x_RANGE, 0x00fc, - 0x0a, 0xfff, 0xfff, 0, 1}, - {"pcl818h", 9, 16, 8, 10000, 1, 16, 16, &range_pcl818h_ai, - &range_unipolar5, PCLx1x_RANGE, 0x00fc, - 0x0a, 0xfff, 0xfff, 0, 1}, - {"pcl818hd", 9, 16, 8, 10000, 1, 16, 16, &range_pcl818h_ai, - &range_unipolar5, PCLx1x_RANGE, 0x00fc, - 0x0a, 0xfff, 0xfff, 1, 1}, - {"pcl818hg", 12, 16, 8, 10000, 1, 16, 16, &range_pcl818hg_ai, - &range_unipolar5, PCLx1x_RANGE, 0x00fc, - 0x0a, 0xfff, 0xfff, 1, 1}, - {"pcl818", 9, 16, 8, 10000, 2, 16, 16, &range_pcl818h_ai, - &range_unipolar5, PCLx1x_RANGE, 0x00fc, - 0x0a, 0xfff, 0xfff, 0, 1}, - {"pcl718", 1, 16, 8, 16000, 2, 16, 16, &range_unipolar5, - &range_unipolar5, PCLx1x_RANGE, 0x00fc, - 0x0a, 0xfff, 0xfff, 0, 0}, - /* pcm3718 */ - {"pcm3718", 9, 16, 8, 10000, 0, 16, 16, &range_pcl818h_ai, - &range_unipolar5, PCLx1x_RANGE, 0x00fc, - 0x0a, 0xfff, 0xfff, 0, 1 /* XXX ? */ }, -}; - -#define n_boardtypes (sizeof(boardtypes)/sizeof(struct pcl818_board)) - -static struct comedi_driver driver_pcl818 = { - .driver_name = "pcl818", - .module = THIS_MODULE, - .attach = pcl818_attach, - .detach = pcl818_detach, - .board_name = &boardtypes[0].name, - .num_names = n_boardtypes, - .offset = sizeof(struct pcl818_board), -}; - -static int __init driver_pcl818_init_module(void) -{ - return comedi_driver_register(&driver_pcl818); -} - -static void __exit driver_pcl818_cleanup_module(void) -{ - comedi_driver_unregister(&driver_pcl818); -} - -module_init(driver_pcl818_init_module); -module_exit(driver_pcl818_cleanup_module); - struct pcl818_private { unsigned int dma; /* used DMA, 0=don't use DMA */ @@ -1724,12 +1670,6 @@ static void free_resources(struct comedi_device *dev) /* printk("free_resource() end\n"); */ } -/* -============================================================================== - - Initialization - -*/ static int pcl818_attach(struct comedi_device *dev, struct comedi_devconfig *it) { int ret; @@ -2020,10 +1960,6 @@ no_dma: return 0; } -/* -============================================================================== - Removes device - */ static int pcl818_detach(struct comedi_device *dev) { /* printk("comedi%d: pcl818: remove\n", dev->minor); */ @@ -2031,6 +1967,53 @@ static int pcl818_detach(struct comedi_device *dev) return 0; } +static const struct pcl818_board boardtypes[] = { + {"pcl818l", 4, 16, 8, 25000, 1, 16, 16, &range_pcl818l_l_ai, + &range_unipolar5, PCLx1x_RANGE, 0x00fc, + 0x0a, 0xfff, 0xfff, 0, 1}, + {"pcl818h", 9, 16, 8, 10000, 1, 16, 16, &range_pcl818h_ai, + &range_unipolar5, PCLx1x_RANGE, 0x00fc, + 0x0a, 0xfff, 0xfff, 0, 1}, + {"pcl818hd", 9, 16, 8, 10000, 1, 16, 16, &range_pcl818h_ai, + &range_unipolar5, PCLx1x_RANGE, 0x00fc, + 0x0a, 0xfff, 0xfff, 1, 1}, + {"pcl818hg", 12, 16, 8, 10000, 1, 16, 16, &range_pcl818hg_ai, + &range_unipolar5, PCLx1x_RANGE, 0x00fc, + 0x0a, 0xfff, 0xfff, 1, 1}, + {"pcl818", 9, 16, 8, 10000, 2, 16, 16, &range_pcl818h_ai, + &range_unipolar5, PCLx1x_RANGE, 0x00fc, + 0x0a, 0xfff, 0xfff, 0, 1}, + {"pcl718", 1, 16, 8, 16000, 2, 16, 16, &range_unipolar5, + &range_unipolar5, PCLx1x_RANGE, 0x00fc, + 0x0a, 0xfff, 0xfff, 0, 0}, + /* pcm3718 */ + {"pcm3718", 9, 16, 8, 10000, 0, 16, 16, &range_pcl818h_ai, + &range_unipolar5, PCLx1x_RANGE, 0x00fc, + 0x0a, 0xfff, 0xfff, 0, 1 /* XXX ? */ }, +}; + +static struct comedi_driver driver_pcl818 = { + .driver_name = "pcl818", + .module = THIS_MODULE, + .attach = pcl818_attach, + .detach = pcl818_detach, + .board_name = &boardtypes[0].name, + .num_names = ARRAY_SIZE(boardtypes), + .offset = sizeof(struct pcl818_board), +}; + +static int __init driver_pcl818_init_module(void) +{ + return comedi_driver_register(&driver_pcl818); +} +module_init(driver_pcl818_init_module); + +static void __exit driver_pcl818_cleanup_module(void) +{ + comedi_driver_unregister(&driver_pcl818); +} +module_exit(driver_pcl818_cleanup_module); + MODULE_AUTHOR("Comedi http://www.comedi.org"); MODULE_DESCRIPTION("Comedi low-level driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/staging/comedi/drivers/pcm3724.c b/drivers/staging/comedi/drivers/pcm3724.c index f5c0bd17684..88a354b6c0b 100644 --- a/drivers/staging/comedi/drivers/pcm3724.c +++ b/drivers/staging/comedi/drivers/pcm3724.c @@ -62,10 +62,6 @@ Copy/pasted/hacked from pcm724.c #define CR_A_MODE(a) ((a)<<5) #define CR_CW 0x80 -static int pcm3724_attach(struct comedi_device *dev, - struct comedi_devconfig *it); -static int pcm3724_detach(struct comedi_device *dev); - struct pcm3724_board { const char *name; /* driver name */ int dio; /* num of DIO */ @@ -80,36 +76,8 @@ struct priv_pcm3724 { int dio_2; }; -static const struct pcm3724_board boardtypes[] = { - {"pcm3724", 48, 2, 0x00fc, PCM3724_SIZE,}, -}; - -#define n_boardtypes (sizeof(boardtypes)/sizeof(struct pcm3724_board)) #define this_board ((const struct pcm3724_board *)dev->board_ptr) -static struct comedi_driver driver_pcm3724 = { - .driver_name = "pcm3724", - .module = THIS_MODULE, - .attach = pcm3724_attach, - .detach = pcm3724_detach, - .board_name = &boardtypes[0].name, - .num_names = n_boardtypes, - .offset = sizeof(struct pcm3724_board), -}; - -static int __init driver_pcm3724_init_module(void) -{ - return comedi_driver_register(&driver_pcm3724); -} - -static void __exit driver_pcm3724_cleanup_module(void) -{ - comedi_driver_unregister(&driver_pcm3724); -} - -module_init(driver_pcm3724_init_module); -module_exit(driver_pcm3724_cleanup_module); - /* (setq c-basic-offset 8) */ static int subdev_8255_cb(int dir, int port, int data, unsigned long arg) @@ -319,6 +287,32 @@ static int pcm3724_detach(struct comedi_device *dev) return 0; } +static const struct pcm3724_board boardtypes[] = { + { "pcm3724", 48, 2, 0x00fc, PCM3724_SIZE, }, +}; + +static struct comedi_driver driver_pcm3724 = { + .driver_name = "pcm3724", + .module = THIS_MODULE, + .attach = pcm3724_attach, + .detach = pcm3724_detach, + .board_name = &boardtypes[0].name, + .num_names = ARRAY_SIZE(boardtypes), + .offset = sizeof(struct pcm3724_board), +}; + +static int __init driver_pcm3724_init_module(void) +{ + return comedi_driver_register(&driver_pcm3724); +} +module_init(driver_pcm3724_init_module); + +static void __exit driver_pcm3724_cleanup_module(void) +{ + comedi_driver_unregister(&driver_pcm3724); +} +module_exit(driver_pcm3724_cleanup_module); + MODULE_AUTHOR("Comedi http://www.comedi.org"); MODULE_DESCRIPTION("Comedi low-level driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/staging/comedi/drivers/pcm3730.c b/drivers/staging/comedi/drivers/pcm3730.c index bada6b236ff..34289934837 100644 --- a/drivers/staging/comedi/drivers/pcm3730.c +++ b/drivers/staging/comedi/drivers/pcm3730.c @@ -28,29 +28,6 @@ Configuration options: #define PCM3730_DIB 2 #define PCM3730_DIC 3 -static int pcm3730_attach(struct comedi_device *dev, - struct comedi_devconfig *it); -static int pcm3730_detach(struct comedi_device *dev); -static struct comedi_driver driver_pcm3730 = { - .driver_name = "pcm3730", - .module = THIS_MODULE, - .attach = pcm3730_attach, - .detach = pcm3730_detach, -}; - -static int __init driver_pcm3730_init_module(void) -{ - return comedi_driver_register(&driver_pcm3730); -} - -static void __exit driver_pcm3730_cleanup_module(void) -{ - comedi_driver_unregister(&driver_pcm3730); -} - -module_init(driver_pcm3730_init_module); -module_exit(driver_pcm3730_cleanup_module); - static int pcm3730_do_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data) @@ -166,6 +143,25 @@ static int pcm3730_detach(struct comedi_device *dev) return 0; } +static struct comedi_driver driver_pcm3730 = { + .driver_name = "pcm3730", + .module = THIS_MODULE, + .attach = pcm3730_attach, + .detach = pcm3730_detach, +}; + +static int __init driver_pcm3730_init_module(void) +{ + return comedi_driver_register(&driver_pcm3730); +} +module_init(driver_pcm3730_init_module); + +static void __exit driver_pcm3730_cleanup_module(void) +{ + comedi_driver_unregister(&driver_pcm3730); +} +module_exit(driver_pcm3730_cleanup_module); + MODULE_AUTHOR("Comedi http://www.comedi.org"); MODULE_DESCRIPTION("Comedi low-level driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/staging/comedi/drivers/pcmad.c b/drivers/staging/comedi/drivers/pcmad.c index 23b3d777340..fe8ef664c1f 100644 --- a/drivers/staging/comedi/drivers/pcmad.c +++ b/drivers/staging/comedi/drivers/pcmad.c @@ -57,19 +57,8 @@ struct pcmad_board_struct { const char *name; int n_ai_bits; }; -static const struct pcmad_board_struct pcmad_boards[] = { - { - .name = "pcmad12", - .n_ai_bits = 12, - }, - { - .name = "pcmad16", - .n_ai_bits = 16, - }, -}; #define this_board ((const struct pcmad_board_struct *)(dev->board_ptr)) -#define n_pcmad_boards ARRAY_SIZE(pcmad_boards) struct pcmad_priv_struct { int differential; @@ -77,31 +66,6 @@ struct pcmad_priv_struct { }; #define devpriv ((struct pcmad_priv_struct *)dev->private) -static int pcmad_attach(struct comedi_device *dev, struct comedi_devconfig *it); -static int pcmad_detach(struct comedi_device *dev); -static struct comedi_driver driver_pcmad = { - .driver_name = "pcmad", - .module = THIS_MODULE, - .attach = pcmad_attach, - .detach = pcmad_detach, - .board_name = &pcmad_boards[0].name, - .num_names = n_pcmad_boards, - .offset = sizeof(pcmad_boards[0]), -}; - -static int __init driver_pcmad_init_module(void) -{ - return comedi_driver_register(&driver_pcmad); -} - -static void __exit driver_pcmad_cleanup_module(void) -{ - comedi_driver_unregister(&driver_pcmad); -} - -module_init(driver_pcmad_init_module); -module_exit(driver_pcmad_cleanup_module); - #define TIMEOUT 100 static int pcmad_ai_insn_read(struct comedi_device *dev, @@ -188,6 +152,37 @@ static int pcmad_detach(struct comedi_device *dev) return 0; } +static const struct pcmad_board_struct pcmad_boards[] = { + { + .name = "pcmad12", + .n_ai_bits = 12, + }, { + .name = "pcmad16", + .n_ai_bits = 16, + }, +}; +static struct comedi_driver driver_pcmad = { + .driver_name = "pcmad", + .module = THIS_MODULE, + .attach = pcmad_attach, + .detach = pcmad_detach, + .board_name = &pcmad_boards[0].name, + .num_names = ARRAY_SIZE(pcmad_boards), + .offset = sizeof(pcmad_boards[0]), +}; + +static int __init driver_pcmad_init_module(void) +{ + return comedi_driver_register(&driver_pcmad); +} +module_init(driver_pcmad_init_module); + +static void __exit driver_pcmad_cleanup_module(void) +{ + comedi_driver_unregister(&driver_pcmad); +} +module_exit(driver_pcmad_cleanup_module); + MODULE_AUTHOR("Comedi http://www.comedi.org"); MODULE_DESCRIPTION("Comedi low-level driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/staging/comedi/drivers/pcmda12.c b/drivers/staging/comedi/drivers/pcmda12.c index 0e9ffa28d74..4846d984fb4 100644 --- a/drivers/staging/comedi/drivers/pcmda12.c +++ b/drivers/staging/comedi/drivers/pcmda12.c @@ -80,12 +80,6 @@ static const struct comedi_lrange pcmda12_ranges = { } }; -static const struct pcmda12_board pcmda12_boards[] = { - { - .name = "pcmda12", - }, -}; - /* * Useful for shorthand access to the particular board structure */ @@ -99,57 +93,77 @@ struct pcmda12_private { #define devpriv ((struct pcmda12_private *)(dev->private)) -/* - * The struct comedi_driver structure tells the Comedi core module - * which functions to call to configure/deconfigure (attach/detach) - * the board, and also about the kernel module that contains - * the device code. - */ -static int pcmda12_attach(struct comedi_device *dev, - struct comedi_devconfig *it); -static int pcmda12_detach(struct comedi_device *dev); +static void zero_chans(struct comedi_device *dev) +{ /* sets up an + ASIC chip to defaults */ + int i; + for (i = 0; i < CHANS; ++i) { +/* /\* do this as one instruction?? *\/ */ +/* outw(0, LSB_PORT(chan)); */ + outb(0, LSB_PORT(i)); + outb(0, MSB_PORT(i)); + } + inb(LSB_PORT(0)); /* update chans. */ +} -static void zero_chans(struct comedi_device *dev); +static int ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s, + struct comedi_insn *insn, unsigned int *data) +{ + int i; + int chan = CR_CHAN(insn->chanspec); -static struct comedi_driver driver = { - .driver_name = "pcmda12", - .module = THIS_MODULE, - .attach = pcmda12_attach, - .detach = pcmda12_detach, -/* It is not necessary to implement the following members if you are - * writing a driver for a ISA PnP or PCI card */ - /* Most drivers will support multiple types of boards by - * having an array of board structures. These were defined - * in pcmda12_boards[] above. Note that the element 'name' - * was first in the structure -- Comedi uses this fact to - * extract the name of the board without knowing any details - * about the structure except for its length. - * When a device is attached (by comedi_config), the name - * of the device is given to Comedi, and Comedi tries to - * match it by going through the list of board names. If - * there is a match, the address of the pointer is put - * into dev->board_ptr and driver->attach() is called. - * - * Note that these are not necessary if you can determine - * the type of board in software. ISA PnP, PCI, and PCMCIA - * devices are such boards. - */ - .board_name = &pcmda12_boards[0].name, - .offset = sizeof(struct pcmda12_board), - .num_names = ARRAY_SIZE(pcmda12_boards), -}; + /* Writing a list of values to an AO channel is probably not + * very useful, but that's how the interface is defined. */ + for (i = 0; i < insn->n; ++i) { -static int ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s, - struct comedi_insn *insn, unsigned int *data); +/* /\* do this as one instruction?? *\/ */ +/* outw(data[i], LSB_PORT(chan)); */ + + /* Need to do this as two instructions due to 8-bit bus?? */ + /* first, load the low byte */ + outb(LSB(data[i]), LSB_PORT(chan)); + /* next, write the high byte */ + outb(MSB(data[i]), MSB_PORT(chan)); + + /* save shadow register */ + devpriv->ao_readback[chan] = data[i]; + + if (!devpriv->simultaneous_xfer_mode) + inb(LSB_PORT(chan)); + } + + /* return the number of samples written */ + return i; +} + +/* AO subdevices should have a read insn as well as a write insn. + + Usually this means copying a value stored in devpriv->ao_readback. + However, since this driver supports simultaneous xfer then sometimes + this function actually accomplishes work. + + Simultaneaous xfer mode is accomplished by loading ALL the values + you want for AO in all the channels, then READing off one of the AO + registers to initiate the instantaneous simultaneous update of all + DAC outputs, which makes all AO channels update simultaneously. + This is useful for some control applications, I would imagine. +*/ static int ao_rinsn(struct comedi_device *dev, struct comedi_subdevice *s, - struct comedi_insn *insn, unsigned int *data); + struct comedi_insn *insn, unsigned int *data) +{ + int i; + int chan = CR_CHAN(insn->chanspec); + + for (i = 0; i < insn->n; i++) { + if (devpriv->simultaneous_xfer_mode) + inb(LSB_PORT(chan)); + /* read back shadow register */ + data[i] = devpriv->ao_readback[chan]; + } + + return i; +} -/* - * Attach is called by the Comedi core to configure the driver - * for a particular board. If you specified a board_name array - * in the driver structure, dev->board_ptr contains that - * address. - */ static int pcmda12_attach(struct comedi_device *dev, struct comedi_devconfig *it) { @@ -213,14 +227,6 @@ static int pcmda12_attach(struct comedi_device *dev, return 1; } -/* - * _detach is called to deconfigure a device. It should deallocate - * resources. - * This function is also called when _attach() fails, so it should be - * careful not to release resources that were not necessarily - * allocated by _attach(). dev->private and dev->subdevices are - * deallocated automatically by the core. - */ static int pcmda12_detach(struct comedi_device *dev) { printk(KERN_INFO @@ -230,92 +236,32 @@ static int pcmda12_detach(struct comedi_device *dev) return 0; } -static void zero_chans(struct comedi_device *dev) -{ /* sets up an - ASIC chip to defaults */ - int i; - for (i = 0; i < CHANS; ++i) { -/* /\* do this as one instruction?? *\/ */ -/* outw(0, LSB_PORT(chan)); */ - outb(0, LSB_PORT(i)); - outb(0, MSB_PORT(i)); - } - inb(LSB_PORT(0)); /* update chans. */ -} - -static int ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s, - struct comedi_insn *insn, unsigned int *data) -{ - int i; - int chan = CR_CHAN(insn->chanspec); - - /* Writing a list of values to an AO channel is probably not - * very useful, but that's how the interface is defined. */ - for (i = 0; i < insn->n; ++i) { - -/* /\* do this as one instruction?? *\/ */ -/* outw(data[i], LSB_PORT(chan)); */ - - /* Need to do this as two instructions due to 8-bit bus?? */ - /* first, load the low byte */ - outb(LSB(data[i]), LSB_PORT(chan)); - /* next, write the high byte */ - outb(MSB(data[i]), MSB_PORT(chan)); - - /* save shadow register */ - devpriv->ao_readback[chan] = data[i]; - - if (!devpriv->simultaneous_xfer_mode) - inb(LSB_PORT(chan)); - } - - /* return the number of samples written */ - return i; -} - -/* AO subdevices should have a read insn as well as a write insn. - - Usually this means copying a value stored in devpriv->ao_readback. - However, since this driver supports simultaneous xfer then sometimes - this function actually accomplishes work. - - Simultaneaous xfer mode is accomplished by loading ALL the values - you want for AO in all the channels, then READing off one of the AO - registers to initiate the instantaneous simultaneous update of all - DAC outputs, which makes all AO channels update simultaneously. - This is useful for some control applications, I would imagine. -*/ -static int ao_rinsn(struct comedi_device *dev, struct comedi_subdevice *s, - struct comedi_insn *insn, unsigned int *data) -{ - int i; - int chan = CR_CHAN(insn->chanspec); - - for (i = 0; i < insn->n; i++) { - if (devpriv->simultaneous_xfer_mode) - inb(LSB_PORT(chan)); - /* read back shadow register */ - data[i] = devpriv->ao_readback[chan]; - } +static const struct pcmda12_board pcmda12_boards[] = { + { + .name = "pcmda12", + }, +}; - return i; -} +static struct comedi_driver driver = { + .driver_name = "pcmda12", + .module = THIS_MODULE, + .attach = pcmda12_attach, + .detach = pcmda12_detach, + .board_name = &pcmda12_boards[0].name, + .offset = sizeof(struct pcmda12_board), + .num_names = ARRAY_SIZE(pcmda12_boards), +}; -/* - * A convenient macro that defines init_module() and cleanup_module(), - * as necessary. - */ static int __init driver_init_module(void) { return comedi_driver_register(&driver); } +module_init(driver_init_module); static void __exit driver_cleanup_module(void) { comedi_driver_unregister(&driver); } - -module_init(driver_init_module); module_exit(driver_cleanup_module); MODULE_AUTHOR("Comedi http://www.comedi.org"); diff --git a/drivers/staging/comedi/drivers/pcmmio.c b/drivers/staging/comedi/drivers/pcmmio.c index eddac00e4e2..d7f98d575f4 100644 --- a/drivers/staging/comedi/drivers/pcmmio.c +++ b/drivers/staging/comedi/drivers/pcmmio.c @@ -145,13 +145,6 @@ Configuration Options: #define PAGE_ENAB 2 #define PAGE_INT_ID 3 -static int ai_rinsn(struct comedi_device *, struct comedi_subdevice *, - struct comedi_insn *, unsigned int *); -static int ao_rinsn(struct comedi_device *, struct comedi_subdevice *, - struct comedi_insn *, unsigned int *); -static int ao_winsn(struct comedi_device *, struct comedi_subdevice *, - struct comedi_insn *, unsigned int *); - /* * Board descriptions for two imaginary boards. Describing the * boards in this way is optional, and completely driver-dependent. @@ -190,23 +183,6 @@ static const struct comedi_lrange ranges_ao = { RANGE(-2.5, 2.5), RANGE(-2.5, 7.5)} }; -static const struct pcmmio_board pcmmio_boards[] = { - { - .name = "pcmmio", - .dio_num_asics = 1, - .dio_num_ports = 6, - .total_iosize = 32, - .ai_bits = 16, - .ao_bits = 16, - .n_ai_chans = 16, - .n_ao_chans = 8, - .ai_range_table = &ranges_ai, - .ao_range_table = &ranges_ao, - .ai_rinsn = ai_rinsn, - .ao_rinsn = ao_rinsn, - .ao_winsn = ao_winsn}, -}; - /* * Useful for shorthand access to the particular board structure */ @@ -293,312 +269,6 @@ struct pcmmio_private { */ #define devpriv ((struct pcmmio_private *)dev->private) #define subpriv ((struct pcmmio_subdev_private *)s->private) -/* - * The struct comedi_driver structure tells the Comedi core module - * which functions to call to configure/deconfigure (attach/detach) - * the board, and also about the kernel module that contains - * the device code. - */ -static int pcmmio_attach(struct comedi_device *dev, - struct comedi_devconfig *it); -static int pcmmio_detach(struct comedi_device *dev); - -static struct comedi_driver driver = { - .driver_name = "pcmmio", - .module = THIS_MODULE, - .attach = pcmmio_attach, - .detach = pcmmio_detach, -/* It is not necessary to implement the following members if you are - * writing a driver for a ISA PnP or PCI card */ - /* Most drivers will support multiple types of boards by - * having an array of board structures. These were defined - * in pcmmio_boards[] above. Note that the element 'name' - * was first in the structure -- Comedi uses this fact to - * extract the name of the board without knowing any details - * about the structure except for its length. - * When a device is attached (by comedi_config), the name - * of the device is given to Comedi, and Comedi tries to - * match it by going through the list of board names. If - * there is a match, the address of the pointer is put - * into dev->board_ptr and driver->attach() is called. - * - * Note that these are not necessary if you can determine - * the type of board in software. ISA PnP, PCI, and PCMCIA - * devices are such boards. - */ - .board_name = &pcmmio_boards[0].name, - .offset = sizeof(struct pcmmio_board), - .num_names = ARRAY_SIZE(pcmmio_boards), -}; - -static int pcmmio_dio_insn_bits(struct comedi_device *dev, - struct comedi_subdevice *s, - struct comedi_insn *insn, unsigned int *data); -static int pcmmio_dio_insn_config(struct comedi_device *dev, - struct comedi_subdevice *s, - struct comedi_insn *insn, unsigned int *data); - -static irqreturn_t interrupt_pcmmio(int irq, void *d); -static void pcmmio_stop_intr(struct comedi_device *, struct comedi_subdevice *); -static int pcmmio_cancel(struct comedi_device *dev, struct comedi_subdevice *s); -static int pcmmio_cmd(struct comedi_device *dev, struct comedi_subdevice *s); -static int pcmmio_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s, - struct comedi_cmd *cmd); - -/* some helper functions to deal with specifics of this device's registers */ -/* sets up/clears ASIC chips to defaults */ -static void init_asics(struct comedi_device *dev); -static void switch_page(struct comedi_device *dev, int asic, int page); -#ifdef notused -static void lock_port(struct comedi_device *dev, int asic, int port); -static void unlock_port(struct comedi_device *dev, int asic, int port); -#endif - -/* - * Attach is called by the Comedi core to configure the driver - * for a particular board. If you specified a board_name array - * in the driver structure, dev->board_ptr contains that - * address. - */ -static int pcmmio_attach(struct comedi_device *dev, struct comedi_devconfig *it) -{ - struct comedi_subdevice *s; - int sdev_no, chans_left, n_dio_subdevs, n_subdevs, port, asic, - thisasic_chanct = 0; - unsigned long iobase; - unsigned int irq[MAX_ASICS]; - - iobase = it->options[0]; - irq[0] = it->options[1]; - - printk(KERN_INFO "comedi%d: %s: io: %lx attaching...\n", dev->minor, - driver.driver_name, iobase); - - dev->iobase = iobase; - - if (!iobase || !request_region(iobase, - thisboard->total_iosize, - driver.driver_name)) { - printk(KERN_ERR "comedi%d: I/O port conflict\n", dev->minor); - return -EIO; - } - -/* - * Initialize dev->board_name. Note that we can use the "thisboard" - * macro now, since we just initialized it in the last line. - */ - dev->board_name = thisboard->name; - -/* - * Allocate the private structure area. alloc_private() is a - * convenient macro defined in comedidev.h. - */ - if (alloc_private(dev, sizeof(struct pcmmio_private)) < 0) { - printk(KERN_ERR "comedi%d: cannot allocate private data structure\n", - dev->minor); - return -ENOMEM; - } - - for (asic = 0; asic < MAX_ASICS; ++asic) { - devpriv->asics[asic].num = asic; - devpriv->asics[asic].iobase = - dev->iobase + 16 + asic * ASIC_IOSIZE; - /* - * this gets actually set at the end of this function when we - * request_irqs - */ - devpriv->asics[asic].irq = 0; - spin_lock_init(&devpriv->asics[asic].spinlock); - } - - chans_left = CHANS_PER_ASIC * thisboard->dio_num_asics; - n_dio_subdevs = CALC_N_DIO_SUBDEVS(chans_left); - n_subdevs = n_dio_subdevs + 2; - devpriv->sprivs = - kcalloc(n_subdevs, sizeof(struct pcmmio_subdev_private), - GFP_KERNEL); - if (!devpriv->sprivs) { - printk(KERN_ERR "comedi%d: cannot allocate subdevice private data structures\n", - dev->minor); - return -ENOMEM; - } - /* - * Allocate the subdevice structures. alloc_subdevice() is a - * convenient macro defined in comedidev.h. - * - * Allocate 1 AI + 1 AO + 2 DIO subdevs (24 lines per DIO) - */ - if (alloc_subdevices(dev, n_subdevs) < 0) { - printk(KERN_ERR "comedi%d: cannot allocate subdevice data structures\n", - dev->minor); - return -ENOMEM; - } - - /* First, AI */ - sdev_no = 0; - s = dev->subdevices + sdev_no; - s->private = devpriv->sprivs + sdev_no; - s->maxdata = (1 << thisboard->ai_bits) - 1; - s->range_table = thisboard->ai_range_table; - s->subdev_flags = SDF_READABLE | SDF_GROUND | SDF_DIFF; - s->type = COMEDI_SUBD_AI; - s->n_chan = thisboard->n_ai_chans; - s->len_chanlist = s->n_chan; - s->insn_read = thisboard->ai_rinsn; - subpriv->iobase = dev->iobase + 0; - /* initialize the resource enable register by clearing it */ - outb(0, subpriv->iobase + 3); - outb(0, subpriv->iobase + 4 + 3); - - /* Next, AO */ - ++sdev_no; - s = dev->subdevices + sdev_no; - s->private = devpriv->sprivs + sdev_no; - s->maxdata = (1 << thisboard->ao_bits) - 1; - s->range_table = thisboard->ao_range_table; - s->subdev_flags = SDF_READABLE; - s->type = COMEDI_SUBD_AO; - s->n_chan = thisboard->n_ao_chans; - s->len_chanlist = s->n_chan; - s->insn_read = thisboard->ao_rinsn; - s->insn_write = thisboard->ao_winsn; - subpriv->iobase = dev->iobase + 8; - /* initialize the resource enable register by clearing it */ - outb(0, subpriv->iobase + 3); - outb(0, subpriv->iobase + 4 + 3); - - ++sdev_no; - port = 0; - asic = 0; - for (; sdev_no < (int)dev->n_subdevices; ++sdev_no) { - int byte_no; - - s = dev->subdevices + sdev_no; - s->private = devpriv->sprivs + sdev_no; - s->maxdata = 1; - s->range_table = &range_digital; - s->subdev_flags = SDF_READABLE | SDF_WRITABLE; - s->type = COMEDI_SUBD_DIO; - s->insn_bits = pcmmio_dio_insn_bits; - s->insn_config = pcmmio_dio_insn_config; - s->n_chan = min(chans_left, MAX_CHANS_PER_SUBDEV); - subpriv->dio.intr.asic = -1; - subpriv->dio.intr.first_chan = -1; - subpriv->dio.intr.asic_chan = -1; - subpriv->dio.intr.num_asic_chans = -1; - subpriv->dio.intr.active = 0; - s->len_chanlist = 1; - - /* save the ioport address for each 'port' of 8 channels in the - subdevice */ - for (byte_no = 0; byte_no < PORTS_PER_SUBDEV; ++byte_no, ++port) { - if (port >= PORTS_PER_ASIC) { - port = 0; - ++asic; - thisasic_chanct = 0; - } - subpriv->iobases[byte_no] = - devpriv->asics[asic].iobase + port; - - if (thisasic_chanct < - CHANS_PER_PORT * INTR_PORTS_PER_ASIC - && subpriv->dio.intr.asic < 0) { - /* - * this is an interrupt subdevice, - * so setup the struct - */ - subpriv->dio.intr.asic = asic; - subpriv->dio.intr.active = 0; - subpriv->dio.intr.stop_count = 0; - subpriv->dio.intr.first_chan = byte_no * 8; - subpriv->dio.intr.asic_chan = thisasic_chanct; - subpriv->dio.intr.num_asic_chans = - s->n_chan - subpriv->dio.intr.first_chan; - s->cancel = pcmmio_cancel; - s->do_cmd = pcmmio_cmd; - s->do_cmdtest = pcmmio_cmdtest; - s->len_chanlist = - subpriv->dio.intr.num_asic_chans; - } - thisasic_chanct += CHANS_PER_PORT; - } - spin_lock_init(&subpriv->dio.intr.spinlock); - - chans_left -= s->n_chan; - - if (!chans_left) { - /* - * reset the asic to our first asic, - * to do intr subdevs - */ - asic = 0; - port = 0; - } - - } - - init_asics(dev); /* clear out all the registers, basically */ - - for (asic = 0; irq[0] && asic < MAX_ASICS; ++asic) { - if (irq[asic] - && request_irq(irq[asic], interrupt_pcmmio, - IRQF_SHARED, thisboard->name, dev)) { - int i; - /* unroll the allocated irqs.. */ - for (i = asic - 1; i >= 0; --i) { - free_irq(irq[i], dev); - devpriv->asics[i].irq = irq[i] = 0; - } - irq[asic] = 0; - } - devpriv->asics[asic].irq = irq[asic]; - } - - dev->irq = irq[0]; /* - * grr.. wish comedi dev struct supported - * multiple irqs.. - */ - - if (irq[0]) { - printk(KERN_DEBUG "comedi%d: irq: %u\n", dev->minor, irq[0]); - if (thisboard->dio_num_asics == 2 && irq[1]) - printk(KERN_DEBUG "comedi%d: second ASIC irq: %u\n", - dev->minor, irq[1]); - } else { - printk(KERN_INFO "comedi%d: (IRQ mode disabled)\n", dev->minor); - } - - printk(KERN_INFO "comedi%d: attached\n", dev->minor); - - return 1; -} - -/* - * _detach is called to deconfigure a device. It should deallocate - * resources. - * This function is also called when _attach() fails, so it should be - * careful not to release resources that were not necessarily - * allocated by _attach(). dev->private and dev->subdevices are - * deallocated automatically by the core. - */ -static int pcmmio_detach(struct comedi_device *dev) -{ - int i; - - printk(KERN_INFO "comedi%d: %s: remove\n", dev->minor, driver.driver_name); - if (dev->iobase) - release_region(dev->iobase, thisboard->total_iosize); - - for (i = 0; i < MAX_ASICS; ++i) { - if (devpriv && devpriv->asics[i].irq) - free_irq(devpriv->asics[i].irq, dev); - } - - if (devpriv && devpriv->sprivs) - kfree(devpriv->sprivs); - - return 0; -} /* DIO devices are slightly special. Although it is possible to * implement the insn_read/insn_write interface, it is much more @@ -667,7 +337,7 @@ static int pcmmio_dio_insn_bits(struct comedi_device *dev, } #ifdef DAMMIT_ITS_BROKEN /* DEBUG */ - printk("data_out_byte %02x\n", (unsigned)byte); + printk(KERN_DEBUG "data_out_byte %02x\n", (unsigned)byte); #endif /* save the digital input lines for this byte.. */ s->state |= ((unsigned int)byte) << offset; @@ -751,6 +421,21 @@ static int pcmmio_dio_insn_config(struct comedi_device *dev, return insn->n; } +static void switch_page(struct comedi_device *dev, int asic, int page) +{ + if (asic < 0 || asic >= thisboard->dio_num_asics) + return; /* paranoia */ + if (page < 0 || page >= NUM_PAGES) + return; /* more paranoia */ + + devpriv->asics[asic].pagelock &= ~REG_PAGE_MASK; + devpriv->asics[asic].pagelock |= page << REG_PAGE_BITOFFSET; + + /* now write out the shadow register */ + outb(devpriv->asics[asic].pagelock, + devpriv->asics[asic].iobase + REG_PAGELOCK); +} + static void init_asics(struct comedi_device *dev) { /* sets up an ASIC chip to defaults */ @@ -788,21 +473,6 @@ static void init_asics(struct comedi_device *dev) } } -static void switch_page(struct comedi_device *dev, int asic, int page) -{ - if (asic < 0 || asic >= thisboard->dio_num_asics) - return; /* paranoia */ - if (page < 0 || page >= NUM_PAGES) - return; /* more paranoia */ - - devpriv->asics[asic].pagelock &= ~REG_PAGE_MASK; - devpriv->asics[asic].pagelock |= page << REG_PAGE_BITOFFSET; - - /* now write out the shadow register */ - outb(devpriv->asics[asic].pagelock, - devpriv->asics[asic].iobase + REG_PAGELOCK); -} - #ifdef notused static void lock_port(struct comedi_device *dev, int asic, int port) { @@ -831,6 +501,27 @@ static void unlock_port(struct comedi_device *dev, int asic, int port) } #endif /* notused */ +static void pcmmio_stop_intr(struct comedi_device *dev, + struct comedi_subdevice *s) +{ + int nports, firstport, asic, port; + + asic = subpriv->dio.intr.asic; + if (asic < 0) + return; /* not an interrupt subdev */ + + subpriv->dio.intr.enabled_mask = 0; + subpriv->dio.intr.active = 0; + s->async->inttrig = 0; + nports = subpriv->dio.intr.num_asic_chans / CHANS_PER_PORT; + firstport = subpriv->dio.intr.asic_chan / CHANS_PER_PORT; + switch_page(dev, asic, PAGE_ENAB); + for (port = firstport; port < firstport + nports; ++port) { + /* disable all intrs for this subdev.. */ + outb(0, devpriv->asics[asic].iobase + REG_ENAB0 + port); + } +} + static irqreturn_t interrupt_pcmmio(int irq, void *d) { int asic, got1 = 0; @@ -991,27 +682,6 @@ static irqreturn_t interrupt_pcmmio(int irq, void *d) return IRQ_HANDLED; } -static void pcmmio_stop_intr(struct comedi_device *dev, - struct comedi_subdevice *s) -{ - int nports, firstport, asic, port; - - asic = subpriv->dio.intr.asic; - if (asic < 0) - return; /* not an interrupt subdev */ - - subpriv->dio.intr.enabled_mask = 0; - subpriv->dio.intr.active = 0; - s->async->inttrig = 0; - nports = subpriv->dio.intr.num_asic_chans / CHANS_PER_PORT; - firstport = subpriv->dio.intr.asic_chan / CHANS_PER_PORT; - switch_page(dev, asic, PAGE_ENAB); - for (port = firstport; port < firstport + nports; ++port) { - /* disable all intrs for this subdev.. */ - outb(0, devpriv->asics[asic].iobase + REG_ENAB0 + port); - } -} - static int pcmmio_start_intr(struct comedi_device *dev, struct comedi_subdevice *s) { @@ -1340,21 +1010,276 @@ static int ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s, return n; } +static int pcmmio_attach(struct comedi_device *dev, struct comedi_devconfig *it) +{ + struct comedi_subdevice *s; + int sdev_no, chans_left, n_dio_subdevs, n_subdevs, port, asic, + thisasic_chanct = 0; + unsigned long iobase; + unsigned int irq[MAX_ASICS]; + + iobase = it->options[0]; + irq[0] = it->options[1]; + + printk(KERN_INFO "comedi%d: %s: io: %lx attaching...\n", dev->minor, + driver.driver_name, iobase); + + dev->iobase = iobase; + + if (!iobase || !request_region(iobase, + thisboard->total_iosize, + driver.driver_name)) { + printk(KERN_ERR "comedi%d: I/O port conflict\n", dev->minor); + return -EIO; + } + +/* + * Initialize dev->board_name. Note that we can use the "thisboard" + * macro now, since we just initialized it in the last line. + */ + dev->board_name = thisboard->name; + /* - * A convenient macro that defines init_module() and cleanup_module(), - * as necessary. + * Allocate the private structure area. alloc_private() is a + * convenient macro defined in comedidev.h. */ + if (alloc_private(dev, sizeof(struct pcmmio_private)) < 0) { + printk(KERN_ERR "comedi%d: cannot allocate private data structure\n", + dev->minor); + return -ENOMEM; + } + + for (asic = 0; asic < MAX_ASICS; ++asic) { + devpriv->asics[asic].num = asic; + devpriv->asics[asic].iobase = + dev->iobase + 16 + asic * ASIC_IOSIZE; + /* + * this gets actually set at the end of this function when we + * request_irqs + */ + devpriv->asics[asic].irq = 0; + spin_lock_init(&devpriv->asics[asic].spinlock); + } + + chans_left = CHANS_PER_ASIC * thisboard->dio_num_asics; + n_dio_subdevs = CALC_N_DIO_SUBDEVS(chans_left); + n_subdevs = n_dio_subdevs + 2; + devpriv->sprivs = + kcalloc(n_subdevs, sizeof(struct pcmmio_subdev_private), + GFP_KERNEL); + if (!devpriv->sprivs) { + printk(KERN_ERR "comedi%d: cannot allocate subdevice private data structures\n", + dev->minor); + return -ENOMEM; + } + /* + * Allocate the subdevice structures. alloc_subdevice() is a + * convenient macro defined in comedidev.h. + * + * Allocate 1 AI + 1 AO + 2 DIO subdevs (24 lines per DIO) + */ + if (alloc_subdevices(dev, n_subdevs) < 0) { + printk(KERN_ERR "comedi%d: cannot allocate subdevice data structures\n", + dev->minor); + return -ENOMEM; + } + + /* First, AI */ + sdev_no = 0; + s = dev->subdevices + sdev_no; + s->private = devpriv->sprivs + sdev_no; + s->maxdata = (1 << thisboard->ai_bits) - 1; + s->range_table = thisboard->ai_range_table; + s->subdev_flags = SDF_READABLE | SDF_GROUND | SDF_DIFF; + s->type = COMEDI_SUBD_AI; + s->n_chan = thisboard->n_ai_chans; + s->len_chanlist = s->n_chan; + s->insn_read = thisboard->ai_rinsn; + subpriv->iobase = dev->iobase + 0; + /* initialize the resource enable register by clearing it */ + outb(0, subpriv->iobase + 3); + outb(0, subpriv->iobase + 4 + 3); + + /* Next, AO */ + ++sdev_no; + s = dev->subdevices + sdev_no; + s->private = devpriv->sprivs + sdev_no; + s->maxdata = (1 << thisboard->ao_bits) - 1; + s->range_table = thisboard->ao_range_table; + s->subdev_flags = SDF_READABLE; + s->type = COMEDI_SUBD_AO; + s->n_chan = thisboard->n_ao_chans; + s->len_chanlist = s->n_chan; + s->insn_read = thisboard->ao_rinsn; + s->insn_write = thisboard->ao_winsn; + subpriv->iobase = dev->iobase + 8; + /* initialize the resource enable register by clearing it */ + outb(0, subpriv->iobase + 3); + outb(0, subpriv->iobase + 4 + 3); + + ++sdev_no; + port = 0; + asic = 0; + for (; sdev_no < (int)dev->n_subdevices; ++sdev_no) { + int byte_no; + + s = dev->subdevices + sdev_no; + s->private = devpriv->sprivs + sdev_no; + s->maxdata = 1; + s->range_table = &range_digital; + s->subdev_flags = SDF_READABLE | SDF_WRITABLE; + s->type = COMEDI_SUBD_DIO; + s->insn_bits = pcmmio_dio_insn_bits; + s->insn_config = pcmmio_dio_insn_config; + s->n_chan = min(chans_left, MAX_CHANS_PER_SUBDEV); + subpriv->dio.intr.asic = -1; + subpriv->dio.intr.first_chan = -1; + subpriv->dio.intr.asic_chan = -1; + subpriv->dio.intr.num_asic_chans = -1; + subpriv->dio.intr.active = 0; + s->len_chanlist = 1; + + /* save the ioport address for each 'port' of 8 channels in the + subdevice */ + for (byte_no = 0; byte_no < PORTS_PER_SUBDEV; ++byte_no, ++port) { + if (port >= PORTS_PER_ASIC) { + port = 0; + ++asic; + thisasic_chanct = 0; + } + subpriv->iobases[byte_no] = + devpriv->asics[asic].iobase + port; + + if (thisasic_chanct < + CHANS_PER_PORT * INTR_PORTS_PER_ASIC + && subpriv->dio.intr.asic < 0) { + /* + * this is an interrupt subdevice, + * so setup the struct + */ + subpriv->dio.intr.asic = asic; + subpriv->dio.intr.active = 0; + subpriv->dio.intr.stop_count = 0; + subpriv->dio.intr.first_chan = byte_no * 8; + subpriv->dio.intr.asic_chan = thisasic_chanct; + subpriv->dio.intr.num_asic_chans = + s->n_chan - subpriv->dio.intr.first_chan; + s->cancel = pcmmio_cancel; + s->do_cmd = pcmmio_cmd; + s->do_cmdtest = pcmmio_cmdtest; + s->len_chanlist = + subpriv->dio.intr.num_asic_chans; + } + thisasic_chanct += CHANS_PER_PORT; + } + spin_lock_init(&subpriv->dio.intr.spinlock); + + chans_left -= s->n_chan; + + if (!chans_left) { + /* + * reset the asic to our first asic, + * to do intr subdevs + */ + asic = 0; + port = 0; + } + + } + + init_asics(dev); /* clear out all the registers, basically */ + + for (asic = 0; irq[0] && asic < MAX_ASICS; ++asic) { + if (irq[asic] + && request_irq(irq[asic], interrupt_pcmmio, + IRQF_SHARED, thisboard->name, dev)) { + int i; + /* unroll the allocated irqs.. */ + for (i = asic - 1; i >= 0; --i) { + free_irq(irq[i], dev); + devpriv->asics[i].irq = irq[i] = 0; + } + irq[asic] = 0; + } + devpriv->asics[asic].irq = irq[asic]; + } + + dev->irq = irq[0]; /* + * grr.. wish comedi dev struct supported + * multiple irqs.. + */ + + if (irq[0]) { + printk(KERN_DEBUG "comedi%d: irq: %u\n", dev->minor, irq[0]); + if (thisboard->dio_num_asics == 2 && irq[1]) + printk(KERN_DEBUG "comedi%d: second ASIC irq: %u\n", + dev->minor, irq[1]); + } else { + printk(KERN_INFO "comedi%d: (IRQ mode disabled)\n", dev->minor); + } + + printk(KERN_INFO "comedi%d: attached\n", dev->minor); + + return 1; +} + +static int pcmmio_detach(struct comedi_device *dev) +{ + int i; + + printk(KERN_INFO "comedi%d: %s: remove\n", dev->minor, driver.driver_name); + if (dev->iobase) + release_region(dev->iobase, thisboard->total_iosize); + + for (i = 0; i < MAX_ASICS; ++i) { + if (devpriv && devpriv->asics[i].irq) + free_irq(devpriv->asics[i].irq, dev); + } + + if (devpriv && devpriv->sprivs) + kfree(devpriv->sprivs); + + return 0; +} + +static const struct pcmmio_board pcmmio_boards[] = { + { + .name = "pcmmio", + .dio_num_asics = 1, + .dio_num_ports = 6, + .total_iosize = 32, + .ai_bits = 16, + .ao_bits = 16, + .n_ai_chans = 16, + .n_ao_chans = 8, + .ai_range_table = &ranges_ai, + .ao_range_table = &ranges_ao, + .ai_rinsn = ai_rinsn, + .ao_rinsn = ao_rinsn, + .ao_winsn = ao_winsn + }, +}; + +static struct comedi_driver driver = { + .driver_name = "pcmmio", + .module = THIS_MODULE, + .attach = pcmmio_attach, + .detach = pcmmio_detach, + .board_name = &pcmmio_boards[0].name, + .offset = sizeof(struct pcmmio_board), + .num_names = ARRAY_SIZE(pcmmio_boards), +}; + static int __init driver_init_module(void) { return comedi_driver_register(&driver); } +module_init(driver_init_module); static void __exit driver_cleanup_module(void) { comedi_driver_unregister(&driver); } - -module_init(driver_init_module); module_exit(driver_cleanup_module); MODULE_AUTHOR("Comedi http://www.comedi.org"); diff --git a/drivers/staging/comedi/drivers/pcmuio.c b/drivers/staging/comedi/drivers/pcmuio.c index 661ba2e0389..de4f4865bef 100644 --- a/drivers/staging/comedi/drivers/pcmuio.c +++ b/drivers/staging/comedi/drivers/pcmuio.c @@ -155,19 +155,6 @@ struct pcmuio_board { const int num_ports; }; -static const struct pcmuio_board pcmuio_boards[] = { - { - .name = "pcmuio48", - .num_asics = 1, - .num_ports = 6, - }, - { - .name = "pcmuio96", - .num_asics = 2, - .num_ports = 12, - }, -}; - /* * Useful for shorthand access to the particular board structure */ @@ -218,262 +205,6 @@ struct pcmuio_private { */ #define devpriv ((struct pcmuio_private *)dev->private) #define subpriv ((struct pcmuio_subdev_private *)s->private) -/* - * The struct comedi_driver structure tells the Comedi core module - * which functions to call to configure/deconfigure (attach/detach) - * the board, and also about the kernel module that contains - * the device code. - */ -static int pcmuio_attach(struct comedi_device *dev, - struct comedi_devconfig *it); -static int pcmuio_detach(struct comedi_device *dev); - -static struct comedi_driver driver = { - .driver_name = "pcmuio", - .module = THIS_MODULE, - .attach = pcmuio_attach, - .detach = pcmuio_detach, -/* It is not necessary to implement the following members if you are - * writing a driver for a ISA PnP or PCI card */ - /* Most drivers will support multiple types of boards by - * having an array of board structures. These were defined - * in pcmuio_boards[] above. Note that the element 'name' - * was first in the structure -- Comedi uses this fact to - * extract the name of the board without knowing any details - * about the structure except for its length. - * When a device is attached (by comedi_config), the name - * of the device is given to Comedi, and Comedi tries to - * match it by going through the list of board names. If - * there is a match, the address of the pointer is put - * into dev->board_ptr and driver->attach() is called. - * - * Note that these are not necessary if you can determine - * the type of board in software. ISA PnP, PCI, and PCMCIA - * devices are such boards. - */ - .board_name = &pcmuio_boards[0].name, - .offset = sizeof(struct pcmuio_board), - .num_names = ARRAY_SIZE(pcmuio_boards), -}; - -static int pcmuio_dio_insn_bits(struct comedi_device *dev, - struct comedi_subdevice *s, - struct comedi_insn *insn, unsigned int *data); -static int pcmuio_dio_insn_config(struct comedi_device *dev, - struct comedi_subdevice *s, - struct comedi_insn *insn, unsigned int *data); - -static irqreturn_t interrupt_pcmuio(int irq, void *d); -static void pcmuio_stop_intr(struct comedi_device *, struct comedi_subdevice *); -static int pcmuio_cancel(struct comedi_device *dev, struct comedi_subdevice *s); -static int pcmuio_cmd(struct comedi_device *dev, struct comedi_subdevice *s); -static int pcmuio_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s, - struct comedi_cmd *cmd); - -/* some helper functions to deal with specifics of this device's registers */ -static void init_asics(struct comedi_device *dev); /* sets up/clears ASIC chips to defaults */ -static void switch_page(struct comedi_device *dev, int asic, int page); -#ifdef notused -static void lock_port(struct comedi_device *dev, int asic, int port); -static void unlock_port(struct comedi_device *dev, int asic, int port); -#endif - -/* - * Attach is called by the Comedi core to configure the driver - * for a particular board. If you specified a board_name array - * in the driver structure, dev->board_ptr contains that - * address. - */ -static int pcmuio_attach(struct comedi_device *dev, struct comedi_devconfig *it) -{ - struct comedi_subdevice *s; - int sdev_no, chans_left, n_subdevs, port, asic, thisasic_chanct = 0; - unsigned long iobase; - unsigned int irq[MAX_ASICS]; - - iobase = it->options[0]; - irq[0] = it->options[1]; - irq[1] = it->options[2]; - - dev_dbg(dev->hw_dev, "comedi%d: %s: io: %lx attached\n", dev->minor, - driver.driver_name, iobase); - - dev->iobase = iobase; - - if (!iobase || !request_region(iobase, - thisboard->num_asics * ASIC_IOSIZE, - driver.driver_name)) { - dev_err(dev->hw_dev, "I/O port conflict\n"); - return -EIO; - } - -/* - * Initialize dev->board_name. Note that we can use the "thisboard" - * macro now, since we just initialized it in the last line. - */ - dev->board_name = thisboard->name; - -/* - * Allocate the private structure area. alloc_private() is a - * convenient macro defined in comedidev.h. - */ - if (alloc_private(dev, sizeof(struct pcmuio_private)) < 0) { - dev_warn(dev->hw_dev, "cannot allocate private data structure\n"); - return -ENOMEM; - } - - for (asic = 0; asic < MAX_ASICS; ++asic) { - devpriv->asics[asic].num = asic; - devpriv->asics[asic].iobase = dev->iobase + asic * ASIC_IOSIZE; - devpriv->asics[asic].irq = 0; /* this gets actually set at the end of - this function when we - request_irqs */ - spin_lock_init(&devpriv->asics[asic].spinlock); - } - - chans_left = CHANS_PER_ASIC * thisboard->num_asics; - n_subdevs = CALC_N_SUBDEVS(chans_left); - devpriv->sprivs = - kcalloc(n_subdevs, sizeof(struct pcmuio_subdev_private), - GFP_KERNEL); - if (!devpriv->sprivs) { - dev_warn(dev->hw_dev, "cannot allocate subdevice private data structures\n"); - return -ENOMEM; - } - /* - * Allocate the subdevice structures. alloc_subdevice() is a - * convenient macro defined in comedidev.h. - * - * Allocate 2 subdevs (32 + 16 DIO lines) or 3 32 DIO subdevs for the - * 96-channel version of the board. - */ - if (alloc_subdevices(dev, n_subdevs) < 0) { - dev_dbg(dev->hw_dev, "cannot allocate subdevice data structures\n"); - return -ENOMEM; - } - - port = 0; - asic = 0; - for (sdev_no = 0; sdev_no < (int)dev->n_subdevices; ++sdev_no) { - int byte_no; - - s = dev->subdevices + sdev_no; - s->private = devpriv->sprivs + sdev_no; - s->maxdata = 1; - s->range_table = &range_digital; - s->subdev_flags = SDF_READABLE | SDF_WRITABLE; - s->type = COMEDI_SUBD_DIO; - s->insn_bits = pcmuio_dio_insn_bits; - s->insn_config = pcmuio_dio_insn_config; - s->n_chan = min(chans_left, MAX_CHANS_PER_SUBDEV); - subpriv->intr.asic = -1; - subpriv->intr.first_chan = -1; - subpriv->intr.asic_chan = -1; - subpriv->intr.num_asic_chans = -1; - subpriv->intr.active = 0; - s->len_chanlist = 1; - - /* save the ioport address for each 'port' of 8 channels in the - subdevice */ - for (byte_no = 0; byte_no < PORTS_PER_SUBDEV; ++byte_no, ++port) { - if (port >= PORTS_PER_ASIC) { - port = 0; - ++asic; - thisasic_chanct = 0; - } - subpriv->iobases[byte_no] = - devpriv->asics[asic].iobase + port; - - if (thisasic_chanct < - CHANS_PER_PORT * INTR_PORTS_PER_ASIC - && subpriv->intr.asic < 0) { - /* this is an interrupt subdevice, so setup the struct */ - subpriv->intr.asic = asic; - subpriv->intr.active = 0; - subpriv->intr.stop_count = 0; - subpriv->intr.first_chan = byte_no * 8; - subpriv->intr.asic_chan = thisasic_chanct; - subpriv->intr.num_asic_chans = - s->n_chan - subpriv->intr.first_chan; - dev->read_subdev = s; - s->subdev_flags |= SDF_CMD_READ; - s->cancel = pcmuio_cancel; - s->do_cmd = pcmuio_cmd; - s->do_cmdtest = pcmuio_cmdtest; - s->len_chanlist = subpriv->intr.num_asic_chans; - } - thisasic_chanct += CHANS_PER_PORT; - } - spin_lock_init(&subpriv->intr.spinlock); - - chans_left -= s->n_chan; - - if (!chans_left) { - asic = 0; /* reset the asic to our first asic, to do intr subdevs */ - port = 0; - } - - } - - init_asics(dev); /* clear out all the registers, basically */ - - for (asic = 0; irq[0] && asic < MAX_ASICS; ++asic) { - if (irq[asic] - && request_irq(irq[asic], interrupt_pcmuio, - IRQF_SHARED, thisboard->name, dev)) { - int i; - /* unroll the allocated irqs.. */ - for (i = asic - 1; i >= 0; --i) { - free_irq(irq[i], dev); - devpriv->asics[i].irq = irq[i] = 0; - } - irq[asic] = 0; - } - devpriv->asics[asic].irq = irq[asic]; - } - - dev->irq = irq[0]; /* grr.. wish comedi dev struct supported multiple - irqs.. */ - - if (irq[0]) { - dev_dbg(dev->hw_dev, "irq: %u\n", irq[0]); - if (irq[1] && thisboard->num_asics == 2) - dev_dbg(dev->hw_dev, "second ASIC irq: %u\n", irq[1]); - } else { - dev_dbg(dev->hw_dev, "(IRQ mode disabled)\n"); - } - - - return 1; -} - -/* - * _detach is called to deconfigure a device. It should deallocate - * resources. - * This function is also called when _attach() fails, so it should be - * careful not to release resources that were not necessarily - * allocated by _attach(). dev->private and dev->subdevices are - * deallocated automatically by the core. - */ -static int pcmuio_detach(struct comedi_device *dev) -{ - int i; - - dev_dbg(dev->hw_dev, "comedi%d: %s: remove\n", dev->minor, - driver.driver_name); - if (dev->iobase) - release_region(dev->iobase, ASIC_IOSIZE * thisboard->num_asics); - - for (i = 0; i < MAX_ASICS; ++i) { - if (devpriv->asics[i].irq) - free_irq(devpriv->asics[i].irq, dev); - } - - if (devpriv && devpriv->sprivs) - kfree(devpriv->sprivs); - - return 0; -} /* DIO devices are slightly special. Although it is possible to * implement the insn_read/insn_write interface, it is much more @@ -621,6 +352,21 @@ static int pcmuio_dio_insn_config(struct comedi_device *dev, return insn->n; } +static void switch_page(struct comedi_device *dev, int asic, int page) +{ + if (asic < 0 || asic >= thisboard->num_asics) + return; /* paranoia */ + if (page < 0 || page >= NUM_PAGES) + return; /* more paranoia */ + + devpriv->asics[asic].pagelock &= ~REG_PAGE_MASK; + devpriv->asics[asic].pagelock |= page << REG_PAGE_BITOFFSET; + + /* now write out the shadow register */ + outb(devpriv->asics[asic].pagelock, + dev->iobase + ASIC_IOSIZE * asic + REG_PAGELOCK); +} + static void init_asics(struct comedi_device *dev) { /* sets up an ASIC chip to defaults */ @@ -658,21 +404,6 @@ static void init_asics(struct comedi_device *dev) } } -static void switch_page(struct comedi_device *dev, int asic, int page) -{ - if (asic < 0 || asic >= thisboard->num_asics) - return; /* paranoia */ - if (page < 0 || page >= NUM_PAGES) - return; /* more paranoia */ - - devpriv->asics[asic].pagelock &= ~REG_PAGE_MASK; - devpriv->asics[asic].pagelock |= page << REG_PAGE_BITOFFSET; - - /* now write out the shadow register */ - outb(devpriv->asics[asic].pagelock, - dev->iobase + ASIC_IOSIZE * asic + REG_PAGELOCK); -} - #ifdef notused static void lock_port(struct comedi_device *dev, int asic, int port) { @@ -700,6 +431,27 @@ static void unlock_port(struct comedi_device *dev, int asic, int port) } #endif /* notused */ +static void pcmuio_stop_intr(struct comedi_device *dev, + struct comedi_subdevice *s) +{ + int nports, firstport, asic, port; + + asic = subpriv->intr.asic; + if (asic < 0) + return; /* not an interrupt subdev */ + + subpriv->intr.enabled_mask = 0; + subpriv->intr.active = 0; + s->async->inttrig = 0; + nports = subpriv->intr.num_asic_chans / CHANS_PER_PORT; + firstport = subpriv->intr.asic_chan / CHANS_PER_PORT; + switch_page(dev, asic, PAGE_ENAB); + for (port = firstport; port < firstport + nports; ++port) { + /* disable all intrs for this subdev.. */ + outb(0, devpriv->asics[asic].iobase + REG_ENAB0 + port); + } +} + static irqreturn_t interrupt_pcmuio(int irq, void *d) { int asic, got1 = 0; @@ -852,27 +604,6 @@ static irqreturn_t interrupt_pcmuio(int irq, void *d) return IRQ_HANDLED; } -static void pcmuio_stop_intr(struct comedi_device *dev, - struct comedi_subdevice *s) -{ - int nports, firstport, asic, port; - - asic = subpriv->intr.asic; - if (asic < 0) - return; /* not an interrupt subdev */ - - subpriv->intr.enabled_mask = 0; - subpriv->intr.active = 0; - s->async->inttrig = 0; - nports = subpriv->intr.num_asic_chans / CHANS_PER_PORT; - firstport = subpriv->intr.asic_chan / CHANS_PER_PORT; - switch_page(dev, asic, PAGE_ENAB); - for (port = firstport; port < firstport + nports; ++port) { - /* disable all intrs for this subdev.. */ - outb(0, devpriv->asics[asic].iobase + REG_ENAB0 + port); - } -} - static int pcmuio_start_intr(struct comedi_device *dev, struct comedi_subdevice *s) { @@ -1014,21 +745,221 @@ pcmuio_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s, return comedi_pcm_cmdtest(dev, s, cmd); } +static int pcmuio_attach(struct comedi_device *dev, struct comedi_devconfig *it) +{ + struct comedi_subdevice *s; + int sdev_no, chans_left, n_subdevs, port, asic, thisasic_chanct = 0; + unsigned long iobase; + unsigned int irq[MAX_ASICS]; + + iobase = it->options[0]; + irq[0] = it->options[1]; + irq[1] = it->options[2]; + + dev_dbg(dev->hw_dev, "comedi%d: %s: io: %lx attached\n", dev->minor, + driver.driver_name, iobase); + + dev->iobase = iobase; + + if (!iobase || !request_region(iobase, + thisboard->num_asics * ASIC_IOSIZE, + driver.driver_name)) { + dev_err(dev->hw_dev, "I/O port conflict\n"); + return -EIO; + } + /* - * A convenient macro that defines init_module() and cleanup_module(), - * as necessary. + * Initialize dev->board_name. Note that we can use the "thisboard" + * macro now, since we just initialized it in the last line. + */ + dev->board_name = thisboard->name; + +/* + * Allocate the private structure area. alloc_private() is a + * convenient macro defined in comedidev.h. */ + if (alloc_private(dev, sizeof(struct pcmuio_private)) < 0) { + dev_warn(dev->hw_dev, "cannot allocate private data structure\n"); + return -ENOMEM; + } + + for (asic = 0; asic < MAX_ASICS; ++asic) { + devpriv->asics[asic].num = asic; + devpriv->asics[asic].iobase = dev->iobase + asic * ASIC_IOSIZE; + devpriv->asics[asic].irq = 0; /* this gets actually set at the end of + this function when we + request_irqs */ + spin_lock_init(&devpriv->asics[asic].spinlock); + } + + chans_left = CHANS_PER_ASIC * thisboard->num_asics; + n_subdevs = CALC_N_SUBDEVS(chans_left); + devpriv->sprivs = + kcalloc(n_subdevs, sizeof(struct pcmuio_subdev_private), + GFP_KERNEL); + if (!devpriv->sprivs) { + dev_warn(dev->hw_dev, "cannot allocate subdevice private data structures\n"); + return -ENOMEM; + } + /* + * Allocate the subdevice structures. alloc_subdevice() is a + * convenient macro defined in comedidev.h. + * + * Allocate 2 subdevs (32 + 16 DIO lines) or 3 32 DIO subdevs for the + * 96-channel version of the board. + */ + if (alloc_subdevices(dev, n_subdevs) < 0) { + dev_dbg(dev->hw_dev, "cannot allocate subdevice data structures\n"); + return -ENOMEM; + } + + port = 0; + asic = 0; + for (sdev_no = 0; sdev_no < (int)dev->n_subdevices; ++sdev_no) { + int byte_no; + + s = dev->subdevices + sdev_no; + s->private = devpriv->sprivs + sdev_no; + s->maxdata = 1; + s->range_table = &range_digital; + s->subdev_flags = SDF_READABLE | SDF_WRITABLE; + s->type = COMEDI_SUBD_DIO; + s->insn_bits = pcmuio_dio_insn_bits; + s->insn_config = pcmuio_dio_insn_config; + s->n_chan = min(chans_left, MAX_CHANS_PER_SUBDEV); + subpriv->intr.asic = -1; + subpriv->intr.first_chan = -1; + subpriv->intr.asic_chan = -1; + subpriv->intr.num_asic_chans = -1; + subpriv->intr.active = 0; + s->len_chanlist = 1; + + /* save the ioport address for each 'port' of 8 channels in the + subdevice */ + for (byte_no = 0; byte_no < PORTS_PER_SUBDEV; ++byte_no, ++port) { + if (port >= PORTS_PER_ASIC) { + port = 0; + ++asic; + thisasic_chanct = 0; + } + subpriv->iobases[byte_no] = + devpriv->asics[asic].iobase + port; + + if (thisasic_chanct < + CHANS_PER_PORT * INTR_PORTS_PER_ASIC + && subpriv->intr.asic < 0) { + /* this is an interrupt subdevice, so setup the struct */ + subpriv->intr.asic = asic; + subpriv->intr.active = 0; + subpriv->intr.stop_count = 0; + subpriv->intr.first_chan = byte_no * 8; + subpriv->intr.asic_chan = thisasic_chanct; + subpriv->intr.num_asic_chans = + s->n_chan - subpriv->intr.first_chan; + dev->read_subdev = s; + s->subdev_flags |= SDF_CMD_READ; + s->cancel = pcmuio_cancel; + s->do_cmd = pcmuio_cmd; + s->do_cmdtest = pcmuio_cmdtest; + s->len_chanlist = subpriv->intr.num_asic_chans; + } + thisasic_chanct += CHANS_PER_PORT; + } + spin_lock_init(&subpriv->intr.spinlock); + + chans_left -= s->n_chan; + + if (!chans_left) { + asic = 0; /* reset the asic to our first asic, to do intr subdevs */ + port = 0; + } + + } + + init_asics(dev); /* clear out all the registers, basically */ + + for (asic = 0; irq[0] && asic < MAX_ASICS; ++asic) { + if (irq[asic] + && request_irq(irq[asic], interrupt_pcmuio, + IRQF_SHARED, thisboard->name, dev)) { + int i; + /* unroll the allocated irqs.. */ + for (i = asic - 1; i >= 0; --i) { + free_irq(irq[i], dev); + devpriv->asics[i].irq = irq[i] = 0; + } + irq[asic] = 0; + } + devpriv->asics[asic].irq = irq[asic]; + } + + dev->irq = irq[0]; /* grr.. wish comedi dev struct supported multiple + irqs.. */ + + if (irq[0]) { + dev_dbg(dev->hw_dev, "irq: %u\n", irq[0]); + if (irq[1] && thisboard->num_asics == 2) + dev_dbg(dev->hw_dev, "second ASIC irq: %u\n", irq[1]); + } else { + dev_dbg(dev->hw_dev, "(IRQ mode disabled)\n"); + } + + + return 1; +} + +static int pcmuio_detach(struct comedi_device *dev) +{ + int i; + + dev_dbg(dev->hw_dev, "comedi%d: %s: remove\n", dev->minor, + driver.driver_name); + if (dev->iobase) + release_region(dev->iobase, ASIC_IOSIZE * thisboard->num_asics); + + for (i = 0; i < MAX_ASICS; ++i) { + if (devpriv->asics[i].irq) + free_irq(devpriv->asics[i].irq, dev); + } + + if (devpriv && devpriv->sprivs) + kfree(devpriv->sprivs); + + return 0; +} + +static const struct pcmuio_board pcmuio_boards[] = { + { + .name = "pcmuio48", + .num_asics = 1, + .num_ports = 6, + }, { + .name = "pcmuio96", + .num_asics = 2, + .num_ports = 12, + }, +}; + +static struct comedi_driver driver = { + .driver_name = "pcmuio", + .module = THIS_MODULE, + .attach = pcmuio_attach, + .detach = pcmuio_detach, + .board_name = &pcmuio_boards[0].name, + .offset = sizeof(struct pcmuio_board), + .num_names = ARRAY_SIZE(pcmuio_boards), +}; + static int __init driver_init_module(void) { return comedi_driver_register(&driver); } +module_init(driver_init_module); static void __exit driver_cleanup_module(void) { comedi_driver_unregister(&driver); } - -module_init(driver_init_module); module_exit(driver_cleanup_module); MODULE_AUTHOR("Comedi http://www.comedi.org"); diff --git a/drivers/staging/comedi/drivers/poc.c b/drivers/staging/comedi/drivers/poc.c index 831a576c24a..e3690bbd201 100644 --- a/drivers/staging/comedi/drivers/poc.c +++ b/drivers/staging/comedi/drivers/poc.c @@ -41,20 +41,6 @@ Configuration options: #include <linux/ioport.h> -static int poc_attach(struct comedi_device *dev, struct comedi_devconfig *it); -static int poc_detach(struct comedi_device *dev); -static int readback_insn(struct comedi_device *dev, struct comedi_subdevice *s, - struct comedi_insn *insn, unsigned int *data); - -static int dac02_ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s, - struct comedi_insn *insn, unsigned int *data); -static int pcl733_insn_bits(struct comedi_device *dev, - struct comedi_subdevice *s, - struct comedi_insn *insn, unsigned int *data); -static int pcl734_insn_bits(struct comedi_device *dev, - struct comedi_subdevice *s, - struct comedi_insn *insn, unsigned int *data); - struct boarddef_struct { const char *name; unsigned int iosize; @@ -70,108 +56,9 @@ struct boarddef_struct { struct comedi_insn *, unsigned int *); const struct comedi_lrange *range; }; -static const struct boarddef_struct boards[] = { - { - .name = "dac02", - .iosize = 8, - /* .setup = dac02_setup, */ - .type = COMEDI_SUBD_AO, - .n_chan = 2, - .n_bits = 12, - .winsn = dac02_ao_winsn, - .rinsn = readback_insn, - .range = &range_unknown, - }, - { - .name = "pcl733", - .iosize = 4, - .type = COMEDI_SUBD_DI, - .n_chan = 32, - .n_bits = 1, - .insnbits = pcl733_insn_bits, - .range = &range_digital, - }, - { - .name = "pcl734", - .iosize = 4, - .type = COMEDI_SUBD_DO, - .n_chan = 32, - .n_bits = 1, - .insnbits = pcl734_insn_bits, - .range = &range_digital, - }, -}; -#define n_boards ARRAY_SIZE(boards) #define this_board ((const struct boarddef_struct *)dev->board_ptr) -static struct comedi_driver driver_poc = { - .driver_name = "poc", - .module = THIS_MODULE, - .attach = poc_attach, - .detach = poc_detach, - .board_name = &boards[0].name, - .num_names = n_boards, - .offset = sizeof(boards[0]), -}; - -static int poc_attach(struct comedi_device *dev, struct comedi_devconfig *it) -{ - struct comedi_subdevice *s; - unsigned long iobase; - unsigned int iosize; - - iobase = it->options[0]; - printk(KERN_INFO "comedi%d: poc: using %s iobase 0x%lx\n", dev->minor, - this_board->name, iobase); - - dev->board_name = this_board->name; - - if (iobase == 0) { - printk(KERN_ERR "io base address required\n"); - return -EINVAL; - } - - iosize = this_board->iosize; - /* check if io addresses are available */ - if (!request_region(iobase, iosize, "dac02")) { - printk(KERN_ERR "I/O port conflict: failed to allocate ports " - "0x%lx to 0x%lx\n", iobase, iobase + iosize - 1); - return -EIO; - } - dev->iobase = iobase; - - if (alloc_subdevices(dev, 1) < 0) - return -ENOMEM; - if (alloc_private(dev, sizeof(unsigned int) * this_board->n_chan) < 0) - return -ENOMEM; - - /* analog output subdevice */ - s = dev->subdevices + 0; - s->type = this_board->type; - s->n_chan = this_board->n_chan; - s->maxdata = (1 << this_board->n_bits) - 1; - s->range_table = this_board->range; - s->insn_write = this_board->winsn; - s->insn_read = this_board->rinsn; - s->insn_bits = this_board->insnbits; - if (s->type == COMEDI_SUBD_AO || s->type == COMEDI_SUBD_DO) - s->subdev_flags = SDF_WRITABLE; - - return 0; -} - -static int poc_detach(struct comedi_device *dev) -{ - /* only free stuff if it has been allocated by _attach */ - if (dev->iobase) - release_region(dev->iobase, this_board->iosize); - - printk(KERN_INFO "comedi%d: dac02: remove\n", dev->minor); - - return 0; -} - static int readback_insn(struct comedi_device *dev, struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data) { @@ -248,17 +135,113 @@ static int pcl734_insn_bits(struct comedi_device *dev, return 2; } +static int poc_attach(struct comedi_device *dev, struct comedi_devconfig *it) +{ + struct comedi_subdevice *s; + unsigned long iobase; + unsigned int iosize; + + iobase = it->options[0]; + printk(KERN_INFO "comedi%d: poc: using %s iobase 0x%lx\n", dev->minor, + this_board->name, iobase); + + dev->board_name = this_board->name; + + if (iobase == 0) { + printk(KERN_ERR "io base address required\n"); + return -EINVAL; + } + + iosize = this_board->iosize; + /* check if io addresses are available */ + if (!request_region(iobase, iosize, "dac02")) { + printk(KERN_ERR "I/O port conflict: failed to allocate ports " + "0x%lx to 0x%lx\n", iobase, iobase + iosize - 1); + return -EIO; + } + dev->iobase = iobase; + + if (alloc_subdevices(dev, 1) < 0) + return -ENOMEM; + if (alloc_private(dev, sizeof(unsigned int) * this_board->n_chan) < 0) + return -ENOMEM; + + /* analog output subdevice */ + s = dev->subdevices + 0; + s->type = this_board->type; + s->n_chan = this_board->n_chan; + s->maxdata = (1 << this_board->n_bits) - 1; + s->range_table = this_board->range; + s->insn_write = this_board->winsn; + s->insn_read = this_board->rinsn; + s->insn_bits = this_board->insnbits; + if (s->type == COMEDI_SUBD_AO || s->type == COMEDI_SUBD_DO) + s->subdev_flags = SDF_WRITABLE; + + return 0; +} + +static int poc_detach(struct comedi_device *dev) +{ + /* only free stuff if it has been allocated by _attach */ + if (dev->iobase) + release_region(dev->iobase, this_board->iosize); + + printk(KERN_INFO "comedi%d: dac02: remove\n", dev->minor); + + return 0; +} + +static const struct boarddef_struct boards[] = { + { + .name = "dac02", + .iosize = 8, + /* .setup = dac02_setup, */ + .type = COMEDI_SUBD_AO, + .n_chan = 2, + .n_bits = 12, + .winsn = dac02_ao_winsn, + .rinsn = readback_insn, + .range = &range_unknown, + }, { + .name = "pcl733", + .iosize = 4, + .type = COMEDI_SUBD_DI, + .n_chan = 32, + .n_bits = 1, + .insnbits = pcl733_insn_bits, + .range = &range_digital, + }, { + .name = "pcl734", + .iosize = 4, + .type = COMEDI_SUBD_DO, + .n_chan = 32, + .n_bits = 1, + .insnbits = pcl734_insn_bits, + .range = &range_digital, + }, +}; + +static struct comedi_driver driver_poc = { + .driver_name = "poc", + .module = THIS_MODULE, + .attach = poc_attach, + .detach = poc_detach, + .board_name = &boards[0].name, + .num_names = ARRAY_SIZE(boards), + .offset = sizeof(boards[0]), +}; + static int __init driver_poc_init_module(void) { return comedi_driver_register(&driver_poc); } +module_init(driver_poc_init_module); static void __exit driver_poc_cleanup_module(void) { comedi_driver_unregister(&driver_poc); } - -module_init(driver_poc_init_module); module_exit(driver_poc_cleanup_module); MODULE_AUTHOR("Comedi http://www.comedi.org"); diff --git a/drivers/staging/comedi/drivers/rtd520.c b/drivers/staging/comedi/drivers/rtd520.c index 13844196050..0c15b82d997 100644 --- a/drivers/staging/comedi/drivers/rtd520.c +++ b/drivers/staging/comedi/drivers/rtd520.c @@ -328,14 +328,6 @@ static const struct rtdBoard rtd520Boards[] = { }, }; -static DEFINE_PCI_DEVICE_TABLE(rtd520_pci_table) = { - { PCI_DEVICE(PCI_VENDOR_ID_RTD, 0x7520) }, - { PCI_DEVICE(PCI_VENDOR_ID_RTD, 0x4520) }, - { 0 } -}; - -MODULE_DEVICE_TABLE(pci, rtd520_pci_table); - /* * Useful for shorthand access to the particular board structure */ @@ -353,7 +345,7 @@ struct rtdPrivate { unsigned long intCount; /* interrupt count */ long aiCount; /* total transfer size (samples) */ - int transCount; /* # to tranfer data. 0->1/2FIFO */ + int transCount; /* # to transfer data. 0->1/2FIFO */ int flags; /* flag event modes */ /* PCI device info */ @@ -377,8 +369,11 @@ struct rtdPrivate { u8 utcCtrl[4]; /* crtl mode for 3 utc + read back */ u8 dioStatus; /* could be read back (dio0Ctrl) */ #ifdef USE_DMA - /* Always DMA 1/2 FIFO. Buffer (dmaBuff?) is (at least) twice that size. - After transferring, interrupt processes 1/2 FIFO and passes to comedi */ + /* + * Always DMA 1/2 FIFO. Buffer (dmaBuff?) is (at least) twice that + * size. After transferring, interrupt processes 1/2 FIFO and + * passes to comedi + */ s16 dma0Offset; /* current processing offset (0, 1/2) */ uint16_t *dma0Buff[DMA_CHAIN_COUNT]; /* DMA buffers (for ADC) */ dma_addr_t dma0BuffPhysAddr[DMA_CHAIN_COUNT]; /* physical addresses */ @@ -581,7 +576,8 @@ struct rtdPrivate { /* User output N source select (write only) */ #define RtdUsrOutSource(dev, n, v) \ - writel(v, devpriv->las0+((n <= 0) ? LAS0_UOUT0_SELECT : LAS0_UOUT1_SELECT)) + writel(v, devpriv->las0+((n <= 0) ? LAS0_UOUT0_SELECT : \ + LAS0_UOUT1_SELECT)) /* Digital IO */ #define RtdDio0Read(dev) \ @@ -608,7 +604,8 @@ struct rtdPrivate { /* Write one data value (sign + 12bit + marker bits) */ /* Note: matches what DMA would put. Actual value << 3 */ #define RtdDacFifoPut(dev, n, v) \ - writew((v), devpriv->las1 + (((n) == 0) ? LAS1_DAC1_FIFO : LAS1_DAC2_FIFO)) + writew((v), devpriv->las1 + (((n) == 0) ? LAS1_DAC1_FIFO : \ + LAS1_DAC2_FIFO)) /* Start single DAC conversion */ #define RtdDacUpdate(dev, n) \ @@ -625,7 +622,8 @@ struct rtdPrivate { /* Reset DAC FIFO */ #define RtdDacClearFifo(dev, n) \ - writel(0, devpriv->las0+(((n) == 0) ? LAS0_DAC1_RESET : LAS0_DAC2_RESET)) + writel(0, devpriv->las0+(((n) == 0) ? LAS0_DAC1_RESET : \ + LAS0_DAC2_RESET)) /* Set source for DMA 0 (write only, shadow?) */ #define RtdDma0Source(dev, n) \ @@ -705,22 +703,6 @@ struct rtdPrivate { #define RtdDma1Status(dev) \ readb(devpriv->lcfg+LCFG_DMACSR1) -/* - * The struct comedi_driver structure tells the Comedi core module - * which functions to call to configure/deconfigure (attac/detach) - * the board, and also about the kernel module that contains - * the device code. - */ -static int rtd_attach(struct comedi_device *dev, struct comedi_devconfig *it); -static int rtd_detach(struct comedi_device *dev); - -static struct comedi_driver rtd520Driver = { - .driver_name = DRV_NAME, - .module = THIS_MODULE, - .attach = rtd_attach, - .detach = rtd_detach, -}; - static int rtd_ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data); static int rtd_ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s, @@ -737,7 +719,10 @@ static int rtd_ai_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s, struct comedi_cmd *cmd); static int rtd_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s); static int rtd_ai_cancel(struct comedi_device *dev, struct comedi_subdevice *s); -/* static int rtd_ai_poll (struct comedi_device *dev,struct comedi_subdevice *s); */ +/* + * static int rtd_ai_poll(struct comedi_device *dev, + * struct comedi_subdevice *s); + */ static int rtd_ns_to_timer(unsigned int *ns, int roundMode); static irqreturn_t rtd_interrupt(int irq, void *d); static int rtd520_probe_fifo_depth(struct comedi_device *dev); @@ -857,7 +842,9 @@ static int rtd_attach(struct comedi_device *dev, struct comedi_devconfig *it) DPRINTK("rtd520: PCI latency = %d\n", pci_latency); } - /* Undocumented EPLD version (doesn't match RTD driver results) */ + /* + * Undocumented EPLD version (doesn't match RTD driver results) + */ /*DPRINTK ("rtd520: Reading epld from %p\n", devpriv->las0+0); epld_version = readl (devpriv->las0+0); @@ -970,9 +957,11 @@ static int rtd_attach(struct comedi_device *dev, struct comedi_devconfig *it) #ifdef USE_DMA if (dev->irq > 0) { printk("( DMA buff=%d )\n", DMA_CHAIN_COUNT); - /* The PLX9080 has 2 DMA controllers, but there could be 4 sources: - ADC, digital, DAC1, and DAC2. Since only the ADC supports cmd mode - right now, this isn't an issue (yet) */ + /* + * The PLX9080 has 2 DMA controllers, but there could be + * 4 sources: ADC, digital, DAC1, and DAC2. Since only the + * ADC supports cmd mode right now, this isn't an issue (yet) + */ devpriv->dma0Offset = 0; for (index = 0; index < DMA_CHAIN_COUNT; index++) { @@ -988,10 +977,14 @@ static int rtd_attach(struct comedi_device *dev, struct comedi_devconfig *it) } /*DPRINTK ("buff[%d] @ %p virtual, %x PCI\n", index, - devpriv->dma0Buff[index], devpriv->dma0BuffPhysAddr[index]); */ + devpriv->dma0Buff[index], + devpriv->dma0BuffPhysAddr[index]); */ } - /* setup DMA descriptor ring (use cpu_to_le32 for byte ordering?) */ + /* + * setup DMA descriptor ring (use cpu_to_le32 for byte + * ordering?) + */ devpriv->dma0Chain = pci_alloc_consistent(devpriv->pci_dev, sizeof(struct plx_dma_desc) * @@ -1278,7 +1271,8 @@ static int rtd520_probe_fifo_depth(struct comedi_device *dev) } } if (i == limit) { - printk(KERN_INFO "\ncomedi: %s: failed to probe fifo size.\n", DRV_NAME); + printk(KERN_INFO "\ncomedi: %s: failed to probe fifo size.\n", + DRV_NAME); return -EIO; } RtdAdcClearFifo(dev); @@ -1378,9 +1372,10 @@ static int ai_read_n(struct comedi_device *dev, struct comedi_subdevice *s, d = RtdAdcFifoGet(dev); /* get 2s comp value */ d = d >> 3; /* low 3 bits are marker lines */ - if (CHAN_ARRAY_TEST(devpriv->chanBipolar, s->async->cur_chan)) - sample = d + 2048; /* convert to comedi unsigned data */ - else + if (CHAN_ARRAY_TEST(devpriv->chanBipolar, s->async->cur_chan)) { + /* convert to comedi unsigned data */ + sample = d + 2048; + } else sample = d; if (!comedi_buf_put(s->async, sample)) @@ -1406,9 +1401,10 @@ static int ai_read_dregs(struct comedi_device *dev, struct comedi_subdevice *s) } d = d >> 3; /* low 3 bits are marker lines */ - if (CHAN_ARRAY_TEST(devpriv->chanBipolar, s->async->cur_chan)) - sample = d + 2048; /* convert to comedi unsigned data */ - else + if (CHAN_ARRAY_TEST(devpriv->chanBipolar, s->async->cur_chan)) { + /* convert to comedi unsigned data */ + sample = d + 2048; + } else sample = d; if (!comedi_buf_put(s->async, sample)) @@ -1525,7 +1521,9 @@ static int ai_process_dma(struct comedi_device *dev, struct comedi_subdevice *s) comedi_buf_memcpy_to(s->async, 0, dp, n); comedi_buf_write_free(s->async, n); - /* always at least 1 scan -- 1/2 FIFO is larger than our max scan list */ + /* + * always at least 1 scan -- 1/2 FIFO is larger than our max scan list + */ s->async->events |= COMEDI_CB_BLOCK | COMEDI_CB_EOS; if (++devpriv->dma0Offset >= DMA_CHAIN_COUNT) { /* next buffer */ @@ -1989,7 +1987,7 @@ static int rtd_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s) (TRANS_TARGET_PERIOD * cmd->chanlist_len) / cmd->scan_begin_arg; if (devpriv->transCount < cmd->chanlist_len) { - /* tranfer after each scan (and avoid 0) */ + /* transfer after each scan (and avoid 0) */ devpriv->transCount = cmd->chanlist_len; } else { /* make a multiple of scan length */ devpriv->transCount = @@ -2005,12 +2003,12 @@ static int rtd_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s) devpriv->transCount = 0; devpriv->flags &= ~SEND_EOS; } else { - /* interrupt for each tranfer */ + /* interrupt for each transfer */ RtdAboutCounter(dev, devpriv->transCount - 1); } DPRINTK - ("rtd520: scanLen=%d tranferCount=%d fifoLen=%d\n scanTime(ns)=%d flags=0x%x\n", + ("rtd520: scanLen=%d transferCount=%d fifoLen=%d\n scanTime(ns)=%d flags=0x%x\n", cmd->chanlist_len, devpriv->transCount, devpriv->fifoLen, cmd->scan_begin_arg, devpriv->flags); } else { /* unknown timing, just use 1/2 FIFO */ @@ -2348,14 +2346,17 @@ static int rtd_dio_insn_config(struct comedi_device *dev, return 1; } -/* - * A convenient macro that defines init_module() and cleanup_module(), - * as necessary. - */ +static struct comedi_driver rtd520Driver = { + .driver_name = DRV_NAME, + .module = THIS_MODULE, + .attach = rtd_attach, + .detach = rtd_detach, +}; + static int __devinit rtd520Driver_pci_probe(struct pci_dev *dev, const struct pci_device_id *ent) { - return comedi_pci_auto_config(dev, rtd520Driver.driver_name); + return comedi_pci_auto_config(dev, &rtd520Driver); } static void __devexit rtd520Driver_pci_remove(struct pci_dev *dev) @@ -2363,10 +2364,17 @@ static void __devexit rtd520Driver_pci_remove(struct pci_dev *dev) comedi_pci_auto_unconfig(dev); } +static DEFINE_PCI_DEVICE_TABLE(rtd520_pci_table) = { + { PCI_DEVICE(PCI_VENDOR_ID_RTD, 0x7520) }, + { PCI_DEVICE(PCI_VENDOR_ID_RTD, 0x4520) }, + { 0 } +}; +MODULE_DEVICE_TABLE(pci, rtd520_pci_table); + static struct pci_driver rtd520Driver_pci_driver = { - .id_table = rtd520_pci_table, - .probe = &rtd520Driver_pci_probe, - .remove = __devexit_p(&rtd520Driver_pci_remove) + .id_table = rtd520_pci_table, + .probe = &rtd520Driver_pci_probe, + .remove = __devexit_p(&rtd520Driver_pci_remove) }; static int __init rtd520Driver_init_module(void) @@ -2380,14 +2388,13 @@ static int __init rtd520Driver_init_module(void) rtd520Driver_pci_driver.name = (char *)rtd520Driver.driver_name; return pci_register_driver(&rtd520Driver_pci_driver); } +module_init(rtd520Driver_init_module); static void __exit rtd520Driver_cleanup_module(void) { pci_unregister_driver(&rtd520Driver_pci_driver); comedi_driver_unregister(&rtd520Driver); } - -module_init(rtd520Driver_init_module); module_exit(rtd520Driver_cleanup_module); MODULE_AUTHOR("Comedi http://www.comedi.org"); diff --git a/drivers/staging/comedi/drivers/rti800.c b/drivers/staging/comedi/drivers/rti800.c index 72042b81831..9e082b3f969 100644 --- a/drivers/staging/comedi/drivers/rti800.c +++ b/drivers/staging/comedi/drivers/rti800.c @@ -138,39 +138,8 @@ struct rti800_board { int has_ao; }; -static const struct rti800_board boardtypes[] = { - {"rti800", 0}, - {"rti815", 1}, -}; - #define this_board ((const struct rti800_board *)dev->board_ptr) -static int rti800_attach(struct comedi_device *dev, - struct comedi_devconfig *it); -static int rti800_detach(struct comedi_device *dev); -static struct comedi_driver driver_rti800 = { - .driver_name = "rti800", - .module = THIS_MODULE, - .attach = rti800_attach, - .detach = rti800_detach, - .num_names = ARRAY_SIZE(boardtypes), - .board_name = &boardtypes[0].name, - .offset = sizeof(struct rti800_board), -}; - -static int __init driver_rti800_init_module(void) -{ - return comedi_driver_register(&driver_rti800); -} - -static void __exit driver_rti800_cleanup_module(void) -{ - comedi_driver_unregister(&driver_rti800); -} - -module_init(driver_rti800_init_module); -module_exit(driver_rti800_cleanup_module); - static irqreturn_t rti800_interrupt(int irq, void *dev); struct rti800_private { @@ -487,6 +456,33 @@ static int rti800_detach(struct comedi_device *dev) return 0; } +static const struct rti800_board boardtypes[] = { + { "rti800", 0 }, + { "rti815", 1 }, +}; + +static struct comedi_driver driver_rti800 = { + .driver_name = "rti800", + .module = THIS_MODULE, + .attach = rti800_attach, + .detach = rti800_detach, + .num_names = ARRAY_SIZE(boardtypes), + .board_name = &boardtypes[0].name, + .offset = sizeof(struct rti800_board), +}; + +static int __init driver_rti800_init_module(void) +{ + return comedi_driver_register(&driver_rti800); +} +module_init(driver_rti800_init_module); + +static void __exit driver_rti800_cleanup_module(void) +{ + comedi_driver_unregister(&driver_rti800); +} +module_exit(driver_rti800_cleanup_module); + MODULE_AUTHOR("Comedi http://www.comedi.org"); MODULE_DESCRIPTION("Comedi low-level driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/staging/comedi/drivers/rti802.c b/drivers/staging/comedi/drivers/rti802.c index f59cb11590f..21baf1a1c40 100644 --- a/drivers/staging/comedi/drivers/rti802.c +++ b/drivers/staging/comedi/drivers/rti802.c @@ -47,29 +47,6 @@ Configuration Options: #define RTI802_DATALOW 1 #define RTI802_DATAHIGH 2 -static int rti802_attach(struct comedi_device *dev, - struct comedi_devconfig *it); -static int rti802_detach(struct comedi_device *dev); -static struct comedi_driver driver_rti802 = { - .driver_name = "rti802", - .module = THIS_MODULE, - .attach = rti802_attach, - .detach = rti802_detach, -}; - -static int __init driver_rti802_init_module(void) -{ - return comedi_driver_register(&driver_rti802); -} - -static void __exit driver_rti802_cleanup_module(void) -{ - comedi_driver_unregister(&driver_rti802); -} - -module_init(driver_rti802_init_module); -module_exit(driver_rti802_cleanup_module); - struct rti802_private { enum { dac_2comp, dac_straight @@ -162,6 +139,25 @@ static int rti802_detach(struct comedi_device *dev) return 0; } +static struct comedi_driver driver_rti802 = { + .driver_name = "rti802", + .module = THIS_MODULE, + .attach = rti802_attach, + .detach = rti802_detach, +}; + +static int __init driver_rti802_init_module(void) +{ + return comedi_driver_register(&driver_rti802); +} +module_init(driver_rti802_init_module); + +static void __exit driver_rti802_cleanup_module(void) +{ + comedi_driver_unregister(&driver_rti802); +} +module_exit(driver_rti802_cleanup_module); + MODULE_AUTHOR("Comedi http://www.comedi.org"); MODULE_DESCRIPTION("Comedi low-level driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/staging/comedi/drivers/s526.c b/drivers/staging/comedi/drivers/s526.c index 2b34daedc3d..ffe4362819e 100644 --- a/drivers/staging/comedi/drivers/s526.c +++ b/drivers/staging/comedi/drivers/s526.c @@ -230,287 +230,6 @@ struct s526_private { */ #define devpriv ((struct s526_private *)dev->private) -/* - * The struct comedi_driver structure tells the Comedi core module - * which functions to call to configure/deconfigure (attach/detach) - * the board, and also about the kernel module that contains - * the device code. - */ -static int s526_attach(struct comedi_device *dev, struct comedi_devconfig *it); -static int s526_detach(struct comedi_device *dev); -static struct comedi_driver driver_s526 = { - .driver_name = "s526", - .module = THIS_MODULE, - .attach = s526_attach, - .detach = s526_detach, -/* It is not necessary to implement the following members if you are - * writing a driver for a ISA PnP or PCI card */ - /* Most drivers will support multiple types of boards by - * having an array of board structures. These were defined - * in s526_boards[] above. Note that the element 'name' - * was first in the structure -- Comedi uses this fact to - * extract the name of the board without knowing any details - * about the structure except for its length. - * When a device is attached (by comedi_config), the name - * of the device is given to Comedi, and Comedi tries to - * match it by going through the list of board names. If - * there is a match, the address of the pointer is put - * into dev->board_ptr and driver->attach() is called. - * - * Note that these are not necessary if you can determine - * the type of board in software. ISA PnP, PCI, and PCMCIA - * devices are such boards. - */ - .board_name = &s526_boards[0].name, - .offset = sizeof(struct s526_board), - .num_names = ARRAY_SIZE(s526_boards), -}; - -static int s526_gpct_rinsn(struct comedi_device *dev, - struct comedi_subdevice *s, struct comedi_insn *insn, - unsigned int *data); -static int s526_gpct_insn_config(struct comedi_device *dev, - struct comedi_subdevice *s, - struct comedi_insn *insn, unsigned int *data); -static int s526_gpct_winsn(struct comedi_device *dev, - struct comedi_subdevice *s, struct comedi_insn *insn, - unsigned int *data); -static int s526_ai_insn_config(struct comedi_device *dev, - struct comedi_subdevice *s, - struct comedi_insn *insn, unsigned int *data); -static int s526_ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s, - struct comedi_insn *insn, unsigned int *data); -static int s526_ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s, - struct comedi_insn *insn, unsigned int *data); -static int s526_ao_rinsn(struct comedi_device *dev, struct comedi_subdevice *s, - struct comedi_insn *insn, unsigned int *data); -static int s526_dio_insn_bits(struct comedi_device *dev, - struct comedi_subdevice *s, - struct comedi_insn *insn, unsigned int *data); -static int s526_dio_insn_config(struct comedi_device *dev, - struct comedi_subdevice *s, - struct comedi_insn *insn, unsigned int *data); - -/* - * Attach is called by the Comedi core to configure the driver - * for a particular board. If you specified a board_name array - * in the driver structure, dev->board_ptr contains that - * address. - */ -static int s526_attach(struct comedi_device *dev, struct comedi_devconfig *it) -{ - struct comedi_subdevice *s; - int iobase; - int i, n; -/* short value; */ -/* int subdev_channel = 0; */ - union cmReg cmReg; - - printk(KERN_INFO "comedi%d: s526: ", dev->minor); - - iobase = it->options[0]; - if (!iobase || !request_region(iobase, S526_IOSIZE, thisboard->name)) { - comedi_error(dev, "I/O port conflict"); - return -EIO; - } - dev->iobase = iobase; - - printk("iobase=0x%lx\n", dev->iobase); - - /*** make it a little quieter, exw, 8/29/06 - for (i = 0; i < S526_NUM_PORTS; i++) { - printk("0x%02x: 0x%04x\n", ADDR_REG(s526_ports[i]), - inw(ADDR_REG(s526_ports[i]))); - } - ***/ - -/* - * Initialize dev->board_name. Note that we can use the "thisboard" - * macro now, since we just initialized it in the last line. - */ - dev->board_ptr = &s526_boards[0]; - - dev->board_name = thisboard->name; - -/* - * Allocate the private structure area. alloc_private() is a - * convenient macro defined in comedidev.h. - */ - if (alloc_private(dev, sizeof(struct s526_private)) < 0) - return -ENOMEM; - -/* - * Allocate the subdevice structures. alloc_subdevice() is a - * convenient macro defined in comedidev.h. - */ - dev->n_subdevices = 4; - if (alloc_subdevices(dev, dev->n_subdevices) < 0) - return -ENOMEM; - - s = dev->subdevices + 0; - /* GENERAL-PURPOSE COUNTER/TIME (GPCT) */ - s->type = COMEDI_SUBD_COUNTER; - s->subdev_flags = SDF_READABLE | SDF_WRITABLE | SDF_LSAMPL; - /* KG: What does SDF_LSAMPL (see multiq3.c) mean? */ - s->n_chan = thisboard->gpct_chans; - s->maxdata = 0x00ffffff; /* 24 bit counter */ - s->insn_read = s526_gpct_rinsn; - s->insn_config = s526_gpct_insn_config; - s->insn_write = s526_gpct_winsn; - - /* Command are not implemented yet, however they are necessary to - allocate the necessary memory for the comedi_async struct (used - to trigger the GPCT in case of pulsegenerator function */ - /* s->do_cmd = s526_gpct_cmd; */ - /* s->do_cmdtest = s526_gpct_cmdtest; */ - /* s->cancel = s526_gpct_cancel; */ - - s = dev->subdevices + 1; - /* dev->read_subdev=s; */ - /* analog input subdevice */ - s->type = COMEDI_SUBD_AI; - /* we support differential */ - s->subdev_flags = SDF_READABLE | SDF_DIFF; - /* channels 0 to 7 are the regular differential inputs */ - /* channel 8 is "reference 0" (+10V), channel 9 is "reference 1" (0V) */ - s->n_chan = 10; - s->maxdata = 0xffff; - s->range_table = &range_bipolar10; - s->len_chanlist = 16; /* This is the maximum chanlist length that - the board can handle */ - s->insn_read = s526_ai_rinsn; - s->insn_config = s526_ai_insn_config; - - s = dev->subdevices + 2; - /* analog output subdevice */ - s->type = COMEDI_SUBD_AO; - s->subdev_flags = SDF_WRITABLE; - s->n_chan = 4; - s->maxdata = 0xffff; - s->range_table = &range_bipolar10; - s->insn_write = s526_ao_winsn; - s->insn_read = s526_ao_rinsn; - - s = dev->subdevices + 3; - /* digital i/o subdevice */ - if (thisboard->have_dio) { - s->type = COMEDI_SUBD_DIO; - s->subdev_flags = SDF_READABLE | SDF_WRITABLE; - s->n_chan = 8; - s->maxdata = 1; - s->range_table = &range_digital; - s->insn_bits = s526_dio_insn_bits; - s->insn_config = s526_dio_insn_config; - } else { - s->type = COMEDI_SUBD_UNUSED; - } - - printk(KERN_INFO "attached\n"); - - return 1; - -#if 0 - /* Example of Counter Application */ - /* One-shot (software trigger) */ - cmReg.reg.coutSource = 0; /* out RCAP */ - cmReg.reg.coutPolarity = 1; /* Polarity inverted */ - cmReg.reg.autoLoadResetRcap = 1;/* Auto load 0:disabled, 1:enabled */ - cmReg.reg.hwCtEnableSource = 3; /* NOT RCAP */ - cmReg.reg.ctEnableCtrl = 2; /* Hardware */ - cmReg.reg.clockSource = 2; /* Internal */ - cmReg.reg.countDir = 1; /* Down */ - cmReg.reg.countDirCtrl = 1; /* Software */ - cmReg.reg.outputRegLatchCtrl = 0; /* latch on read */ - cmReg.reg.preloadRegSel = 0; /* PR0 */ - cmReg.reg.reserved = 0; - - outw(cmReg.value, ADDR_CHAN_REG(REG_C0M, subdev_channel)); - - outw(0x0001, ADDR_CHAN_REG(REG_C0H, subdev_channel)); - outw(0x3C68, ADDR_CHAN_REG(REG_C0L, subdev_channel)); - - /* Reset the counter */ - outw(0x8000, ADDR_CHAN_REG(REG_C0C, subdev_channel)); - /* Load the counter from PR0 */ - outw(0x4000, ADDR_CHAN_REG(REG_C0C, subdev_channel)); - /* Reset RCAP (fires one-shot) */ - outw(0x0008, ADDR_CHAN_REG(REG_C0C, subdev_channel)); - -#else - - /* Set Counter Mode Register */ - cmReg.reg.coutSource = 0; /* out RCAP */ - cmReg.reg.coutPolarity = 0; /* Polarity inverted */ - cmReg.reg.autoLoadResetRcap = 0; /* Auto load disabled */ - cmReg.reg.hwCtEnableSource = 2; /* NOT RCAP */ - cmReg.reg.ctEnableCtrl = 1; /* 1: Software, >1 : Hardware */ - cmReg.reg.clockSource = 3; /* x4 */ - cmReg.reg.countDir = 0; /* up */ - cmReg.reg.countDirCtrl = 0; /* quadrature */ - cmReg.reg.outputRegLatchCtrl = 0; /* latch on read */ - cmReg.reg.preloadRegSel = 0; /* PR0 */ - cmReg.reg.reserved = 0; - - n = 0; - printk(KERN_INFO "Mode reg=0x%04x, 0x%04lx\n", - cmReg.value, ADDR_CHAN_REG(REG_C0M, n)); - outw(cmReg.value, ADDR_CHAN_REG(REG_C0M, n)); - udelay(1000); - printk(KERN_INFO "Read back mode reg=0x%04x\n", - inw(ADDR_CHAN_REG(REG_C0M, n))); - - /* Load the pre-load register high word */ -/* value = (short) (0x55); */ -/* outw(value, ADDR_CHAN_REG(REG_C0H, n)); */ - - /* Load the pre-load register low word */ -/* value = (short)(0xaa55); */ -/* outw(value, ADDR_CHAN_REG(REG_C0L, n)); */ - - /* Write the Counter Control Register */ -/* outw(value, ADDR_CHAN_REG(REG_C0C, 0)); */ - - /* Reset the counter if it is software preload */ - if (cmReg.reg.autoLoadResetRcap == 0) { - /* Reset the counter */ - outw(0x8000, ADDR_CHAN_REG(REG_C0C, n)); - /* Load the counter from PR0 */ - outw(0x4000, ADDR_CHAN_REG(REG_C0C, n)); - } - - outw(cmReg.value, ADDR_CHAN_REG(REG_C0M, n)); - udelay(1000); - printk(KERN_INFO "Read back mode reg=0x%04x\n", - inw(ADDR_CHAN_REG(REG_C0M, n))); - -#endif - printk(KERN_INFO "Current registres:\n"); - - for (i = 0; i < S526_NUM_PORTS; i++) { - printk(KERN_INFO "0x%02lx: 0x%04x\n", - ADDR_REG(s526_ports[i]), inw(ADDR_REG(s526_ports[i]))); - } - return 1; -} - -/* - * _detach is called to deconfigure a device. It should deallocate - * resources. - * This function is also called when _attach() fails, so it should be - * careful not to release resources that were not necessarily - * allocated by _attach(). dev->private and dev->subdevices are - * deallocated automatically by the core. - */ -static int s526_detach(struct comedi_device *dev) -{ - printk(KERN_INFO "comedi%d: s526: remove\n", dev->minor); - - if (dev->iobase > 0) - release_region(dev->iobase, S526_IOSIZE); - - return 0; -} - static int s526_gpct_rinsn(struct comedi_device *dev, struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data) @@ -1023,21 +742,232 @@ static int s526_dio_insn_config(struct comedi_device *dev, return 1; } +static int s526_attach(struct comedi_device *dev, struct comedi_devconfig *it) +{ + struct comedi_subdevice *s; + int iobase; + int i, n; +/* short value; */ +/* int subdev_channel = 0; */ + union cmReg cmReg; + + printk(KERN_INFO "comedi%d: s526: ", dev->minor); + + iobase = it->options[0]; + if (!iobase || !request_region(iobase, S526_IOSIZE, thisboard->name)) { + comedi_error(dev, "I/O port conflict"); + return -EIO; + } + dev->iobase = iobase; + + printk("iobase=0x%lx\n", dev->iobase); + + /*** make it a little quieter, exw, 8/29/06 + for (i = 0; i < S526_NUM_PORTS; i++) { + printk("0x%02x: 0x%04x\n", ADDR_REG(s526_ports[i]), + inw(ADDR_REG(s526_ports[i]))); + } + ***/ + +/* + * Initialize dev->board_name. Note that we can use the "thisboard" + * macro now, since we just initialized it in the last line. + */ + dev->board_ptr = &s526_boards[0]; + + dev->board_name = thisboard->name; + +/* + * Allocate the private structure area. alloc_private() is a + * convenient macro defined in comedidev.h. + */ + if (alloc_private(dev, sizeof(struct s526_private)) < 0) + return -ENOMEM; + /* - * A convenient macro that defines init_module() and cleanup_module(), - * as necessary. + * Allocate the subdevice structures. alloc_subdevice() is a + * convenient macro defined in comedidev.h. */ + dev->n_subdevices = 4; + if (alloc_subdevices(dev, dev->n_subdevices) < 0) + return -ENOMEM; + + s = dev->subdevices + 0; + /* GENERAL-PURPOSE COUNTER/TIME (GPCT) */ + s->type = COMEDI_SUBD_COUNTER; + s->subdev_flags = SDF_READABLE | SDF_WRITABLE | SDF_LSAMPL; + /* KG: What does SDF_LSAMPL (see multiq3.c) mean? */ + s->n_chan = thisboard->gpct_chans; + s->maxdata = 0x00ffffff; /* 24 bit counter */ + s->insn_read = s526_gpct_rinsn; + s->insn_config = s526_gpct_insn_config; + s->insn_write = s526_gpct_winsn; + + /* Command are not implemented yet, however they are necessary to + allocate the necessary memory for the comedi_async struct (used + to trigger the GPCT in case of pulsegenerator function */ + /* s->do_cmd = s526_gpct_cmd; */ + /* s->do_cmdtest = s526_gpct_cmdtest; */ + /* s->cancel = s526_gpct_cancel; */ + + s = dev->subdevices + 1; + /* dev->read_subdev=s; */ + /* analog input subdevice */ + s->type = COMEDI_SUBD_AI; + /* we support differential */ + s->subdev_flags = SDF_READABLE | SDF_DIFF; + /* channels 0 to 7 are the regular differential inputs */ + /* channel 8 is "reference 0" (+10V), channel 9 is "reference 1" (0V) */ + s->n_chan = 10; + s->maxdata = 0xffff; + s->range_table = &range_bipolar10; + s->len_chanlist = 16; /* This is the maximum chanlist length that + the board can handle */ + s->insn_read = s526_ai_rinsn; + s->insn_config = s526_ai_insn_config; + + s = dev->subdevices + 2; + /* analog output subdevice */ + s->type = COMEDI_SUBD_AO; + s->subdev_flags = SDF_WRITABLE; + s->n_chan = 4; + s->maxdata = 0xffff; + s->range_table = &range_bipolar10; + s->insn_write = s526_ao_winsn; + s->insn_read = s526_ao_rinsn; + + s = dev->subdevices + 3; + /* digital i/o subdevice */ + if (thisboard->have_dio) { + s->type = COMEDI_SUBD_DIO; + s->subdev_flags = SDF_READABLE | SDF_WRITABLE; + s->n_chan = 8; + s->maxdata = 1; + s->range_table = &range_digital; + s->insn_bits = s526_dio_insn_bits; + s->insn_config = s526_dio_insn_config; + } else { + s->type = COMEDI_SUBD_UNUSED; + } + + printk(KERN_INFO "attached\n"); + + return 1; + +#if 0 + /* Example of Counter Application */ + /* One-shot (software trigger) */ + cmReg.reg.coutSource = 0; /* out RCAP */ + cmReg.reg.coutPolarity = 1; /* Polarity inverted */ + cmReg.reg.autoLoadResetRcap = 1;/* Auto load 0:disabled, 1:enabled */ + cmReg.reg.hwCtEnableSource = 3; /* NOT RCAP */ + cmReg.reg.ctEnableCtrl = 2; /* Hardware */ + cmReg.reg.clockSource = 2; /* Internal */ + cmReg.reg.countDir = 1; /* Down */ + cmReg.reg.countDirCtrl = 1; /* Software */ + cmReg.reg.outputRegLatchCtrl = 0; /* latch on read */ + cmReg.reg.preloadRegSel = 0; /* PR0 */ + cmReg.reg.reserved = 0; + + outw(cmReg.value, ADDR_CHAN_REG(REG_C0M, subdev_channel)); + + outw(0x0001, ADDR_CHAN_REG(REG_C0H, subdev_channel)); + outw(0x3C68, ADDR_CHAN_REG(REG_C0L, subdev_channel)); + + /* Reset the counter */ + outw(0x8000, ADDR_CHAN_REG(REG_C0C, subdev_channel)); + /* Load the counter from PR0 */ + outw(0x4000, ADDR_CHAN_REG(REG_C0C, subdev_channel)); + /* Reset RCAP (fires one-shot) */ + outw(0x0008, ADDR_CHAN_REG(REG_C0C, subdev_channel)); + +#else + + /* Set Counter Mode Register */ + cmReg.reg.coutSource = 0; /* out RCAP */ + cmReg.reg.coutPolarity = 0; /* Polarity inverted */ + cmReg.reg.autoLoadResetRcap = 0; /* Auto load disabled */ + cmReg.reg.hwCtEnableSource = 2; /* NOT RCAP */ + cmReg.reg.ctEnableCtrl = 1; /* 1: Software, >1 : Hardware */ + cmReg.reg.clockSource = 3; /* x4 */ + cmReg.reg.countDir = 0; /* up */ + cmReg.reg.countDirCtrl = 0; /* quadrature */ + cmReg.reg.outputRegLatchCtrl = 0; /* latch on read */ + cmReg.reg.preloadRegSel = 0; /* PR0 */ + cmReg.reg.reserved = 0; + + n = 0; + printk(KERN_INFO "Mode reg=0x%04x, 0x%04lx\n", + cmReg.value, ADDR_CHAN_REG(REG_C0M, n)); + outw(cmReg.value, ADDR_CHAN_REG(REG_C0M, n)); + udelay(1000); + printk(KERN_INFO "Read back mode reg=0x%04x\n", + inw(ADDR_CHAN_REG(REG_C0M, n))); + + /* Load the pre-load register high word */ +/* value = (short) (0x55); */ +/* outw(value, ADDR_CHAN_REG(REG_C0H, n)); */ + + /* Load the pre-load register low word */ +/* value = (short)(0xaa55); */ +/* outw(value, ADDR_CHAN_REG(REG_C0L, n)); */ + + /* Write the Counter Control Register */ +/* outw(value, ADDR_CHAN_REG(REG_C0C, 0)); */ + + /* Reset the counter if it is software preload */ + if (cmReg.reg.autoLoadResetRcap == 0) { + /* Reset the counter */ + outw(0x8000, ADDR_CHAN_REG(REG_C0C, n)); + /* Load the counter from PR0 */ + outw(0x4000, ADDR_CHAN_REG(REG_C0C, n)); + } + + outw(cmReg.value, ADDR_CHAN_REG(REG_C0M, n)); + udelay(1000); + printk(KERN_INFO "Read back mode reg=0x%04x\n", + inw(ADDR_CHAN_REG(REG_C0M, n))); + +#endif + printk(KERN_INFO "Current registres:\n"); + + for (i = 0; i < S526_NUM_PORTS; i++) { + printk(KERN_INFO "0x%02lx: 0x%04x\n", + ADDR_REG(s526_ports[i]), inw(ADDR_REG(s526_ports[i]))); + } + return 1; +} + +static int s526_detach(struct comedi_device *dev) +{ + printk(KERN_INFO "comedi%d: s526: remove\n", dev->minor); + + if (dev->iobase > 0) + release_region(dev->iobase, S526_IOSIZE); + + return 0; +} + +static struct comedi_driver driver_s526 = { + .driver_name = "s526", + .module = THIS_MODULE, + .attach = s526_attach, + .detach = s526_detach, + .board_name = &s526_boards[0].name, + .offset = sizeof(struct s526_board), + .num_names = ARRAY_SIZE(s526_boards), +}; + static int __init driver_s526_init_module(void) { return comedi_driver_register(&driver_s526); } +module_init(driver_s526_init_module); static void __exit driver_s526_cleanup_module(void) { comedi_driver_unregister(&driver_s526); } - -module_init(driver_s526_init_module); module_exit(driver_s526_cleanup_module); MODULE_AUTHOR("Comedi http://www.comedi.org"); diff --git a/drivers/staging/comedi/drivers/s626.c b/drivers/staging/comedi/drivers/s626.c index 23fc64b9988..a0b7c713367 100644 --- a/drivers/staging/comedi/drivers/s626.c +++ b/drivers/staging/comedi/drivers/s626.c @@ -83,8 +83,17 @@ MODULE_AUTHOR("Gianluca Palli <gpalli@deis.unibo.it>"); MODULE_DESCRIPTION("Sensoray 626 Comedi driver module"); MODULE_LICENSE("GPL"); +#define PCI_VENDOR_ID_S626 0x1131 +#define PCI_DEVICE_ID_S626 0x7146 +#define PCI_SUBVENDOR_ID_S626 0x6000 +#define PCI_SUBDEVICE_ID_S626 0x0272 + struct s626_board { const char *name; + int vendor_id; + int device_id; + int subvendor_id; + int subdevice_id; int ai_chans; int ai_bits; int ao_chans; @@ -97,6 +106,10 @@ struct s626_board { static const struct s626_board s626_boards[] = { { .name = "s626", + .vendor_id = PCI_VENDOR_ID_S626, + .device_id = PCI_DEVICE_ID_S626, + .subvendor_id = PCI_SUBVENDOR_ID_S626, + .subdevice_id = PCI_SUBDEVICE_ID_S626, .ai_chans = S626_ADC_CHANNELS, .ai_bits = 14, .ao_chans = S626_DAC_CHANNELS, @@ -108,8 +121,6 @@ static const struct s626_board s626_boards[] = { }; #define thisboard ((const struct s626_board *)dev->board_ptr) -#define PCI_VENDOR_ID_S626 0x1131 -#define PCI_DEVICE_ID_S626 0x7146 /* * For devices with vendor:device id == 0x1131:0x7146 you must specify @@ -117,7 +128,7 @@ static const struct s626_board s626_boards[] = { * Philips SAA7146 media/dvb based cards. */ static DEFINE_PCI_DEVICE_TABLE(s626_pci_table) = { - {PCI_VENDOR_ID_S626, PCI_DEVICE_ID_S626, 0x6000, 0x0272, 0, 0, 0}, + {PCI_VENDOR_ID_S626, PCI_DEVICE_ID_S626, PCI_SUBVENDOR_ID_S626, PCI_SUBDEVICE_ID_S626, 0, 0, 0}, {0} }; @@ -227,7 +238,7 @@ static struct dio_private *dio_private_word[]={ static int __devinit driver_s626_pci_probe(struct pci_dev *dev, const struct pci_device_id *ent) { - return comedi_pci_auto_config(dev, driver_s626.driver_name); + return comedi_pci_auto_config(dev, &driver_s626); } static void __devexit driver_s626_pci_remove(struct pci_dev *dev) @@ -554,17 +565,17 @@ static int s626_attach(struct comedi_device *dev, struct comedi_devconfig *it) resource_size_t resourceStart; dma_addr_t appdma; struct comedi_subdevice *s; - const struct pci_device_id *ids; struct pci_dev *pdev = NULL; if (alloc_private(dev, sizeof(struct s626_private)) < 0) return -ENOMEM; - for (i = 0; i < (ARRAY_SIZE(s626_pci_table) - 1) && !pdev; i++) { - ids = &s626_pci_table[i]; + for (i = 0; i < ARRAY_SIZE(s626_boards) && !pdev; i++) { do { - pdev = pci_get_subsys(ids->vendor, ids->device, - ids->subvendor, ids->subdevice, + pdev = pci_get_subsys(s626_boards[i].vendor_id, + s626_boards[i].device_id, + s626_boards[i].subvendor_id, + s626_boards[i].subdevice_id, pdev); if ((it->options[0] || it->options[1]) && pdev) { diff --git a/drivers/staging/comedi/drivers/serial2002.c b/drivers/staging/comedi/drivers/serial2002.c index d880c2f6fbc..a034b10b4fa 100644 --- a/drivers/staging/comedi/drivers/serial2002.c +++ b/drivers/staging/comedi/drivers/serial2002.c @@ -43,20 +43,10 @@ Status: in development #include <linux/serial.h> #include <linux/poll.h> -/* - * Board descriptions for two imaginary boards. Describing the - * boards in this way is optional, and completely driver-dependent. - * Some drivers use arrays such as this, other do not. - */ struct serial2002_board { const char *name; }; -static const struct serial2002_board serial2002_boards[] = { - { - .name = "serial2002"} -}; - /* * Useful for shorthand access to the particular board structure */ @@ -89,35 +79,6 @@ struct serial2002_private { */ #define devpriv ((struct serial2002_private *)dev->private) -static int serial2002_attach(struct comedi_device *dev, - struct comedi_devconfig *it); -static int serial2002_detach(struct comedi_device *dev); -struct comedi_driver driver_serial2002 = { - .driver_name = "serial2002", - .module = THIS_MODULE, - .attach = serial2002_attach, - .detach = serial2002_detach, - .board_name = &serial2002_boards[0].name, - .offset = sizeof(struct serial2002_board), - .num_names = ARRAY_SIZE(serial2002_boards), -}; - -static int serial2002_di_rinsn(struct comedi_device *dev, - struct comedi_subdevice *s, - struct comedi_insn *insn, unsigned int *data); -static int serial2002_do_winsn(struct comedi_device *dev, - struct comedi_subdevice *s, - struct comedi_insn *insn, unsigned int *data); -static int serial2002_ai_rinsn(struct comedi_device *dev, - struct comedi_subdevice *s, - struct comedi_insn *insn, unsigned int *data); -static int serial2002_ao_winsn(struct comedi_device *dev, - struct comedi_subdevice *s, - struct comedi_insn *insn, unsigned int *data); -static int serial2002_ao_rinsn(struct comedi_device *dev, - struct comedi_subdevice *s, - struct comedi_insn *insn, unsigned int *data); - struct serial_data { enum { is_invalid, is_digital, is_channel } kind; int index; @@ -901,17 +862,32 @@ static int serial2002_detach(struct comedi_device *dev) return 0; } +static const struct serial2002_board serial2002_boards[] = { + { + .name = "serial2002" + }, +}; + +struct comedi_driver driver_serial2002 = { + .driver_name = "serial2002", + .module = THIS_MODULE, + .attach = serial2002_attach, + .detach = serial2002_detach, + .board_name = &serial2002_boards[0].name, + .offset = sizeof(struct serial2002_board), + .num_names = ARRAY_SIZE(serial2002_boards), +}; + static int __init driver_serial2002_init_module(void) { return comedi_driver_register(&driver_serial2002); } +module_init(driver_serial2002_init_module); static void __exit driver_serial2002_cleanup_module(void) { comedi_driver_unregister(&driver_serial2002); } - -module_init(driver_serial2002_init_module); module_exit(driver_serial2002_cleanup_module); MODULE_AUTHOR("Comedi http://www.comedi.org"); diff --git a/drivers/staging/comedi/drivers/skel.c b/drivers/staging/comedi/drivers/skel.c index ed69008f0d3..19a513eeebf 100644 --- a/drivers/staging/comedi/drivers/skel.c +++ b/drivers/staging/comedi/drivers/skel.c @@ -623,7 +623,7 @@ static int skel_dio_insn_config(struct comedi_device *dev, static int __devinit driver_skel_pci_probe(struct pci_dev *dev, const struct pci_device_id *ent) { - return comedi_pci_auto_config(dev, driver_skel.driver_name); + return comedi_pci_auto_config(dev, &driver_skel); } static void __devexit driver_skel_pci_remove(struct pci_dev *dev) diff --git a/drivers/staging/comedi/drivers/usbdux.c b/drivers/staging/comedi/drivers/usbdux.c index bf62e0dd6f6..3d300eff493 100644 --- a/drivers/staging/comedi/drivers/usbdux.c +++ b/drivers/staging/comedi/drivers/usbdux.c @@ -317,6 +317,8 @@ static struct usbduxsub usbduxsub[NUMUSBDUX]; static DEFINE_SEMAPHORE(start_stop_sem); +static struct comedi_driver driver_usbdux; /* see below for initializer */ + /* * Stops the data acquision * It should be safe to call this function from any context @@ -2304,11 +2306,11 @@ static void usbdux_firmware_request_complete_handler(const struct firmware *fw, void *context) { struct usbduxsub *usbduxsub_tmp = context; - struct usb_device *usbdev = usbduxsub_tmp->usbdev; + struct usb_interface *uinterf = usbduxsub_tmp->interface; int ret; if (fw == NULL) { - dev_err(&usbdev->dev, + dev_err(&uinterf->dev, "Firmware complete handler without firmware!\n"); return; } @@ -2320,11 +2322,11 @@ static void usbdux_firmware_request_complete_handler(const struct firmware *fw, ret = firmwareUpload(usbduxsub_tmp, fw->data, fw->size); if (ret) { - dev_err(&usbdev->dev, + dev_err(&uinterf->dev, "Could not upload firmware (err=%d)\n", ret); goto out; } - comedi_usb_auto_config(usbdev, BOARDNAME); + comedi_usb_auto_config(uinterf, &driver_usbdux); out: release_firmware(fw); } @@ -2606,7 +2608,7 @@ static void usbduxsub_disconnect(struct usb_interface *intf) dev_err(&intf->dev, "comedi_: BUG! called with wrong ptr!!!\n"); return; } - comedi_usb_auto_unconfig(udev); + comedi_usb_auto_unconfig(intf); down(&start_stop_sem); down(&usbduxsub_tmp->sem); tidy_up(usbduxsub_tmp); @@ -2615,46 +2617,21 @@ static void usbduxsub_disconnect(struct usb_interface *intf) dev_dbg(&intf->dev, "comedi_: disconnected from the usb\n"); } -/* is called when comedi-config is called */ -static int usbdux_attach(struct comedi_device *dev, struct comedi_devconfig *it) +/* common part of attach and attach_usb */ +static int usbdux_attach_common(struct comedi_device *dev, + struct usbduxsub *udev, + void *aux_data, int aux_len) { int ret; - int index; - int i; - struct usbduxsub *udev; - struct comedi_subdevice *s = NULL; - dev->private = NULL; - - down(&start_stop_sem); - /* find a valid device which has been detected by the probe function of - * the usb */ - index = -1; - for (i = 0; i < NUMUSBDUX; i++) { - if ((usbduxsub[i].probed) && (!usbduxsub[i].attached)) { - index = i; - break; - } - } - if (index < 0) { - printk(KERN_ERR "comedi%d: usbdux: error: attach failed, no " - "usbdux devs connected to the usb bus.\n", dev->minor); - up(&start_stop_sem); - return -ENODEV; - } - - udev = &usbduxsub[index]; down(&udev->sem); /* pointer back to the corresponding comedi device */ udev->comedidev = dev; /* trying to upload the firmware into the chip */ - if (comedi_aux_data(it->options, 0) && - it->options[COMEDI_DEVCONF_AUX_DATA_LENGTH]) { - firmwareUpload(udev, comedi_aux_data(it->options, 0), - it->options[COMEDI_DEVCONF_AUX_DATA_LENGTH]); - } + if (aux_data) + firmwareUpload(udev, aux_data, aux_len); dev->board_name = BOARDNAME; @@ -2673,13 +2650,9 @@ static int usbdux_attach(struct comedi_device *dev, struct comedi_devconfig *it) dev_err(&udev->interface->dev, "comedi%d: error alloc space for subdev\n", dev->minor); up(&udev->sem); - up(&start_stop_sem); return ret; } - dev_info(&udev->interface->dev, - "comedi%d: usb-device %d is attached to comedi.\n", - dev->minor, index); /* private structure is also simply the usb-structure */ dev->private = udev; @@ -2776,14 +2749,80 @@ static int usbdux_attach(struct comedi_device *dev, struct comedi_devconfig *it) up(&udev->sem); - up(&start_stop_sem); - dev_info(&udev->interface->dev, "comedi%d: attached to usbdux.\n", dev->minor); return 0; } +/* is called when comedi-config is called */ +static int usbdux_attach(struct comedi_device *dev, struct comedi_devconfig *it) +{ + int ret; + int index; + int i; + void *aux_data; + int aux_len; + + dev->private = NULL; + + aux_data = comedi_aux_data(it->options, 0); + aux_len = it->options[COMEDI_DEVCONF_AUX_DATA_LENGTH]; + if (aux_data == NULL) + aux_len = 0; + else if (aux_len == 0) + aux_data = NULL; + + down(&start_stop_sem); + /* find a valid device which has been detected by the probe function of + * the usb */ + index = -1; + for (i = 0; i < NUMUSBDUX; i++) { + if ((usbduxsub[i].probed) && (!usbduxsub[i].attached)) { + index = i; + break; + } + } + + if (index < 0) { + printk(KERN_ERR + "comedi%d: usbdux: error: attach failed, no usbdux devs connected to the usb bus.\n", + dev->minor); + ret = -ENODEV; + } else + ret = usbdux_attach_common(dev, &usbduxsub[index], + aux_data, aux_len); + up(&start_stop_sem); + return ret; +} + +/* is called from comedi_usb_auto_config() */ +static int usbdux_attach_usb(struct comedi_device *dev, + struct usb_interface *uinterf) +{ + int ret; + struct usbduxsub *this_usbduxsub; + + dev->private = NULL; + + down(&start_stop_sem); + this_usbduxsub = usb_get_intfdata(uinterf); + if (!this_usbduxsub || !this_usbduxsub->probed) { + printk(KERN_ERR + "comedi%d: usbdux: error: attach_usb failed, not connected\n", + dev->minor); + ret = -ENODEV; + } else if (this_usbduxsub->attached) { + printk(KERN_ERR + "comedi%d: usbdux: error: attach_usb failed, already attached\n", + dev->minor); + ret = -ENODEV; + } else + ret = usbdux_attach_common(dev, this_usbduxsub, NULL, 0); + up(&start_stop_sem); + return ret; +} + static int usbdux_detach(struct comedi_device *dev) { struct usbduxsub *usbduxsub_tmp; @@ -2822,6 +2861,7 @@ static struct comedi_driver driver_usbdux = { .module = THIS_MODULE, .attach = usbdux_attach, .detach = usbdux_detach, + .attach_usb = usbdux_attach_usb, }; /* Table with the USB-devices: just now only testing IDs */ diff --git a/drivers/staging/comedi/drivers/usbduxfast.c b/drivers/staging/comedi/drivers/usbduxfast.c index 2a8e725b785..c672ea3784a 100644 --- a/drivers/staging/comedi/drivers/usbduxfast.c +++ b/drivers/staging/comedi/drivers/usbduxfast.c @@ -201,6 +201,8 @@ static struct usbduxfastsub_s usbduxfastsub[NUMUSBDUXFAST]; static DEFINE_SEMAPHORE(start_stop_sem); +static struct comedi_driver driver_usbduxfast; /* see below for initializer */ + /* * bulk transfers to usbduxfast */ @@ -453,14 +455,15 @@ static int usbduxfastsub_start(struct usbduxfastsub_s *udfs) /* 7f92 to zero */ local_transfer_buffer[0] = 0; /* bRequest, "Firmware" */ - ret = usb_control_msg(udfs->usbdev, usb_sndctrlpipe(udfs->usbdev, 0), USBDUXFASTSUB_FIRMWARE, - VENDOR_DIR_OUT, /* bmRequestType */ - USBDUXFASTSUB_CPUCS, /* Value */ - 0x0000, /* Index */ - /* address of the transfer buffer */ - local_transfer_buffer, - 1, /* Length */ - EZTIMEOUT); /* Timeout */ + ret = usb_control_msg(udfs->usbdev, usb_sndctrlpipe(udfs->usbdev, 0), + USBDUXFASTSUB_FIRMWARE, + VENDOR_DIR_OUT, /* bmRequestType */ + USBDUXFASTSUB_CPUCS, /* Value */ + 0x0000, /* Index */ + /* address of the transfer buffer */ + local_transfer_buffer, + 1, /* Length */ + EZTIMEOUT); /* Timeout */ if (ret < 0) { printk("comedi_: usbduxfast_: control msg failed (start)\n"); return ret; @@ -477,7 +480,8 @@ static int usbduxfastsub_stop(struct usbduxfastsub_s *udfs) /* 7f92 to one */ local_transfer_buffer[0] = 1; /* bRequest, "Firmware" */ - ret = usb_control_msg(udfs->usbdev, usb_sndctrlpipe(udfs->usbdev, 0), USBDUXFASTSUB_FIRMWARE, + ret = usb_control_msg(udfs->usbdev, usb_sndctrlpipe(udfs->usbdev, 0), + USBDUXFASTSUB_FIRMWARE, VENDOR_DIR_OUT, /* bmRequestType */ USBDUXFASTSUB_CPUCS, /* Value */ 0x0000, /* Index */ @@ -504,14 +508,15 @@ static int usbduxfastsub_upload(struct usbduxfastsub_s *udfs, startAddr, local_transfer_buffer[0]); #endif /* brequest, firmware */ - ret = usb_control_msg(udfs->usbdev, usb_sndctrlpipe(udfs->usbdev, 0), USBDUXFASTSUB_FIRMWARE, - VENDOR_DIR_OUT, /* bmRequestType */ - startAddr, /* value */ - 0x0000, /* index */ - /* our local safe buffer */ - local_transfer_buffer, - len, /* length */ - EZTIMEOUT); /* timeout */ + ret = usb_control_msg(udfs->usbdev, usb_sndctrlpipe(udfs->usbdev, 0), + USBDUXFASTSUB_FIRMWARE, + VENDOR_DIR_OUT, /* bmRequestType */ + startAddr, /* value */ + 0x0000, /* index */ + /* our local safe buffer */ + local_transfer_buffer, + len, /* length */ + EZTIMEOUT); /* timeout */ #ifdef CONFIG_COMEDI_DEBUG printk(KERN_DEBUG "comedi_: usbduxfast: result=%d\n", ret); @@ -1440,7 +1445,7 @@ static void usbduxfast_firmware_request_complete_handler(const struct firmware *fw, void *context) { struct usbduxfastsub_s *usbduxfastsub_tmp = context; - struct usb_device *usbdev = usbduxfastsub_tmp->usbdev; + struct usb_interface *uinterf = usbduxfastsub_tmp->interface; int ret; if (fw == NULL) @@ -1453,12 +1458,12 @@ static void usbduxfast_firmware_request_complete_handler(const struct firmware ret = firmwareUpload(usbduxfastsub_tmp, fw->data, fw->size); if (ret) { - dev_err(&usbdev->dev, + dev_err(&uinterf->dev, "Could not upload firmware (err=%d)\n", ret); goto out; } - comedi_usb_auto_config(usbdev, BOARDNAME); + comedi_usb_auto_config(uinterf, &driver_usbduxfast); out: release_firmware(fw); } @@ -1606,7 +1611,7 @@ static void usbduxfastsub_disconnect(struct usb_interface *intf) return; } - comedi_usb_auto_unconfig(udev); + comedi_usb_auto_unconfig(intf); down(&start_stop_sem); down(&udfs->sem); diff --git a/drivers/staging/comedi/drivers/usbduxsigma.c b/drivers/staging/comedi/drivers/usbduxsigma.c index 63c9b6dbc31..f21bb0dd916 100644 --- a/drivers/staging/comedi/drivers/usbduxsigma.c +++ b/drivers/staging/comedi/drivers/usbduxsigma.c @@ -267,6 +267,8 @@ static struct usbduxsub usbduxsub[NUMUSBDUX]; static DEFINE_SEMAPHORE(start_stop_sem); +static struct comedi_driver driver_usbduxsigma; /* see below for initializer */ + /* * Stops the data acquision * It should be safe to call this function from any context @@ -2312,11 +2314,11 @@ static void usbdux_firmware_request_complete_handler(const struct firmware *fw, void *context) { struct usbduxsub *usbduxsub_tmp = context; - struct usb_device *usbdev = usbduxsub_tmp->usbdev; + struct usb_interface *uinterf = usbduxsub_tmp->interface; int ret; if (fw == NULL) { - dev_err(&usbdev->dev, + dev_err(&uinterf->dev, "Firmware complete handler without firmware!\n"); return; } @@ -2328,11 +2330,11 @@ static void usbdux_firmware_request_complete_handler(const struct firmware *fw, ret = firmwareUpload(usbduxsub_tmp, fw->data, fw->size); if (ret) { - dev_err(&usbdev->dev, + dev_err(&uinterf->dev, "Could not upload firmware (err=%d)\n", ret); goto out; } - comedi_usb_auto_config(usbdev, BOARDNAME); + comedi_usb_auto_config(uinterf, &driver_usbduxsigma); out: release_firmware(fw); } @@ -2623,7 +2625,7 @@ static void usbduxsigma_disconnect(struct usb_interface *intf) if (usbduxsub_tmp->ao_cmd_running) /* we are still running a command */ usbdux_ao_stop(usbduxsub_tmp, 1); - comedi_usb_auto_unconfig(udev); + comedi_usb_auto_unconfig(intf); down(&start_stop_sem); down(&usbduxsub_tmp->sem); tidy_up(usbduxsub_tmp); diff --git a/drivers/staging/comedi/drivers/vmk80xx.c b/drivers/staging/comedi/drivers/vmk80xx.c index 3d13ca6e167..a7db6862f75 100644 --- a/drivers/staging/comedi/drivers/vmk80xx.c +++ b/drivers/staging/comedi/drivers/vmk80xx.c @@ -247,6 +247,8 @@ static struct vmk80xx_usb vmb[VMK80XX_MAX_BOARDS]; static DEFINE_MUTEX(glb_mutex); +static struct comedi_driver driver_vmk80xx; /* see below for initializer */ + static void vmk80xx_tx_callback(struct urb *urb) { struct vmk80xx_usb *dev = urb->context; @@ -295,7 +297,9 @@ resubmit: if (!usb_submit_urb(urb, GFP_KERNEL)) goto exit; - err("comedi#: vmk80xx: %s - submit urb failed\n", __func__); + dev_err(&urb->dev->dev, + "comedi#: vmk80xx: %s - submit urb failed\n", + __func__); usb_unanchor_urb(urb); } @@ -1018,12 +1022,12 @@ static int vmk80xx_cnt_cinsn(struct comedi_device *cdev, if (n) return n; - down(&dev->limit_sem); - insn_cmd = data[0]; if (insn_cmd != INSN_CONFIG_RESET && insn_cmd != GPCT_RESET) return -EINVAL; + down(&dev->limit_sem); + chan = CR_CHAN(insn->chanspec); if (dev->board.model == VMK8055_MODEL) { @@ -1482,7 +1486,7 @@ static int vmk80xx_probe(struct usb_interface *intf, mutex_unlock(&glb_mutex); - comedi_usb_auto_config(dev->udev, BOARDNAME); + comedi_usb_auto_config(intf, &driver_vmk80xx); return 0; error: @@ -1500,7 +1504,7 @@ static void vmk80xx_disconnect(struct usb_interface *intf) if (!dev) return; - comedi_usb_auto_unconfig(dev->udev); + comedi_usb_auto_unconfig(intf); mutex_lock(&glb_mutex); down(&dev->limit_sem); diff --git a/drivers/staging/comedi/internal.h b/drivers/staging/comedi/internal.h index 434ce343336..7ed20a04eef 100644 --- a/drivers/staging/comedi/internal.h +++ b/drivers/staging/comedi/internal.h @@ -1,5 +1,5 @@ /* - * various internal comedi functions + * various internal comedi stuff */ int do_rangeinfo_ioctl(struct comedi_device *dev, struct comedi_rangeinfo __user *arg); @@ -7,6 +7,10 @@ int insn_inval(struct comedi_device *dev, struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data); int comedi_alloc_board_minor(struct device *hardware_device); void comedi_free_board_minor(unsigned minor); +int comedi_find_board_minor(struct device *hardware_device); void comedi_reset_async_buf(struct comedi_async *async); int comedi_buf_alloc(struct comedi_device *dev, struct comedi_subdevice *s, unsigned long new_size); + +extern unsigned int comedi_default_buf_size_kb; +extern unsigned int comedi_default_buf_maxsize_kb; diff --git a/drivers/staging/et131x/et131x.c b/drivers/staging/et131x/et131x.c index 886f5650444..5b11c5e3622 100644 --- a/drivers/staging/et131x/et131x.c +++ b/drivers/staging/et131x/et131x.c @@ -1710,7 +1710,8 @@ static int et131x_mdio_read(struct mii_bus *bus, int phy_addr, int reg) return value; } -static int et131x_mdio_write(struct mii_bus *bus, int phy_addr, int reg, u16 value) +static int et131x_mdio_write(struct mii_bus *bus, int phy_addr, + int reg, u16 value) { struct net_device *netdev = bus->priv; struct et131x_adapter *adapter = netdev_priv(netdev); @@ -4013,7 +4014,7 @@ static int et131x_pci_init(struct et131x_adapter *adapter, dev_err(&pdev->dev, "Missing PCIe capabilities\n"); goto err_out; } - + /* Let's set up the PORT LOGIC Register. First we need to know what * the max_payload_size is */ @@ -4060,7 +4061,7 @@ static int et131x_pci_init(struct et131x_adapter *adapter, goto err_out; } - ctl = (ctl & ~PCI_EXP_DEVCTL_READRQ) | ( 0x04 << 12); + ctl = (ctl & ~PCI_EXP_DEVCTL_READRQ) | (0x04 << 12); if (pci_write_config_word(pdev, cap + PCI_EXP_DEVCTL, ctl)) { dev_err(&pdev->dev, @@ -4824,7 +4825,8 @@ static int et131x_open(struct net_device *netdev) adapter->error_timer.data = (unsigned long)adapter; add_timer(&adapter->error_timer); - result = request_irq(irq, et131x_isr, IRQF_SHARED, netdev->name, netdev); + result = request_irq(irq, et131x_isr, + IRQF_SHARED, netdev->name, netdev); if (result) { dev_err(&pdev->dev, "could not register IRQ %d\n", irq); return result; diff --git a/drivers/staging/frontier/alphatrack.c b/drivers/staging/frontier/alphatrack.c index 3bf0f40e97f..acbb2cc510f 100644 --- a/drivers/staging/frontier/alphatrack.c +++ b/drivers/staging/frontier/alphatrack.c @@ -333,8 +333,8 @@ static int usb_alphatrack_open(struct inode *inode, struct file *file) interface = usb_find_interface(&usb_alphatrack_driver, subminor); if (!interface) { - err("%s - error, can't find device for minor %d\n", - __func__, subminor); + printk(KERN_ERR "%s - error, can't find device for minor %d\n", + __func__, subminor); retval = -ENODEV; goto unlock_disconnect_exit; } @@ -494,7 +494,8 @@ static ssize_t usb_alphatrack_read(struct file *file, char __user *buffer, /* verify that the device wasn't unplugged */ if (dev->intf == NULL) { retval = -ENODEV; - err("No device or device unplugged %d\n", retval); + printk(KERN_ERR "%s: No device or device unplugged %d\n", + __func__, retval); goto unlock_exit; } @@ -564,7 +565,8 @@ static ssize_t usb_alphatrack_write(struct file *file, /* verify that the device wasn't unplugged */ if (dev->intf == NULL) { retval = -ENODEV; - err("No device or device unplugged %d\n", retval); + printk(KERN_ERR "%s: No device or device unplugged %d\n", + __func__, retval); goto unlock_exit; } @@ -599,7 +601,7 @@ static ssize_t usb_alphatrack_write(struct file *file, } if (dev->interrupt_out_endpoint == NULL) { - err("Endpoint should not be be null!\n"); + dev_err(&dev->intf->dev, "Endpoint should not be be null!\n"); goto unlock_exit; } @@ -619,7 +621,8 @@ static ssize_t usb_alphatrack_write(struct file *file, retval = usb_submit_urb(dev->interrupt_out_urb, GFP_KERNEL); if (retval) { dev->interrupt_out_busy = 0; - err("Couldn't submit interrupt_out_urb %d\n", retval); + dev_err(&dev->intf->dev, + "Couldn't submit interrupt_out_urb %d\n", retval); atomic_dec(&dev->writes_pending); goto unlock_exit; } diff --git a/drivers/staging/frontier/tranzport.c b/drivers/staging/frontier/tranzport.c index 29e99bbcae4..376706f1c71 100644 --- a/drivers/staging/frontier/tranzport.c +++ b/drivers/staging/frontier/tranzport.c @@ -353,7 +353,7 @@ static int usb_tranzport_open(struct inode *inode, struct file *file) interface = usb_find_interface(&usb_tranzport_driver, subminor); if (!interface) { - err("%s - error, can't find device for minor %d\n", + printk(KERN_ERR "%s - error, can't find device for minor %d\n", __func__, subminor); retval = -ENODEV; goto unlock_disconnect_exit; @@ -517,9 +517,11 @@ static ssize_t usb_tranzport_read(struct file *file, char __user *buffer, goto exit; } - /* verify that the device wasn't unplugged */ if (dev->intf == NULL) { + /* verify that the device wasn't unplugged */ + if (dev->intf == NULL) { retval = -ENODEV; - err("No device or device unplugged %d\n", retval); + printk(KERN_ERR "%s: No device or device unplugged %d\n", + __func__, retval); goto unlock_exit; } @@ -691,7 +693,8 @@ static ssize_t usb_tranzport_write(struct file *file, /* verify that the device wasn't unplugged */ if (dev->intf == NULL) { retval = -ENODEV; - err("No device or device unplugged %d\n", retval); + printk(KERN_ERR "%s: No device or device unplugged %d\n", + __func__, retval); goto unlock_exit; } @@ -726,7 +729,7 @@ static ssize_t usb_tranzport_write(struct file *file, } if (dev->interrupt_out_endpoint == NULL) { - err("Endpoint should not be be null!\n"); + dev_err(&dev->intf->dev, "Endpoint should not be be null!\n"); goto unlock_exit; } @@ -746,7 +749,8 @@ static ssize_t usb_tranzport_write(struct file *file, retval = usb_submit_urb(dev->interrupt_out_urb, GFP_KERNEL); if (retval) { dev->interrupt_out_busy = 0; - err("Couldn't submit interrupt_out_urb %d\n", retval); + dev_err(&dev->intf->dev, + "Couldn't submit interrupt_out_urb %d\n", retval); goto unlock_exit; } retval = bytes_to_write; diff --git a/drivers/staging/iio/Documentation/device.txt b/drivers/staging/iio/Documentation/device.txt index 8926f2448cc..0338c7cd0a8 100644 --- a/drivers/staging/iio/Documentation/device.txt +++ b/drivers/staging/iio/Documentation/device.txt @@ -8,7 +8,7 @@ The crucial structure for device drivers in iio is iio_dev. First allocate one using: -struct iio_dev *indio_dev = iio_allocate_device(sizeof(struct chip_state)); +struct iio_dev *indio_dev = iio_device_alloc(sizeof(struct chip_state)); where chip_state is a structure of local state data for this instance of the chip. @@ -78,4 +78,4 @@ be registered afterwards (otherwise the whole parentage of devices gets confused) On remove, iio_device_unregister(indio_dev) will remove the device from -the core, and iio_free_device will clean up. +the core, and iio_device_free will clean up. diff --git a/drivers/staging/iio/Documentation/generic_buffer.c b/drivers/staging/iio/Documentation/generic_buffer.c index 69a05b9456d..bf553356fda 100644 --- a/drivers/staging/iio/Documentation/generic_buffer.c +++ b/drivers/staging/iio/Documentation/generic_buffer.c @@ -60,9 +60,9 @@ void print2byte(int input, struct iio_channel_info *info) /* First swap if incorrect endian */ if (info->be) - input = be16toh((uint_16t)input); + input = be16toh((uint16_t)input); else - input = le16toh((uint_16t)input); + input = le16toh((uint16_t)input); /* shift before conversion to avoid sign extension of left aligned data */ diff --git a/drivers/staging/iio/Documentation/iio_event_monitor.c b/drivers/staging/iio/Documentation/iio_event_monitor.c index 0d21a277305..22275845fb1 100644 --- a/drivers/staging/iio/Documentation/iio_event_monitor.c +++ b/drivers/staging/iio/Documentation/iio_event_monitor.c @@ -27,7 +27,7 @@ #include <fcntl.h> #include <sys/ioctl.h> #include "iio_utils.h" -#include "../events.h" +#include <linux/iio/events.h> static const char * const iio_chan_type_name_spec[] = { [IIO_VOLTAGE] = "voltage", diff --git a/drivers/staging/iio/Documentation/light/sysfs-bus-iio-light-tsl2583 b/drivers/staging/iio/Documentation/light/sysfs-bus-iio-light-tsl2583 new file mode 100755 index 00000000000..470f7ad9c07 --- /dev/null +++ b/drivers/staging/iio/Documentation/light/sysfs-bus-iio-light-tsl2583 @@ -0,0 +1,6 @@ +What: /sys/bus/iio/devices/device[n]/in_illuminance0_calibrate +KernelVersion: 2.6.37 +Contact: linux-iio@vger.kernel.org +Description: + This property causes an internal calibration of the als gain trim + value which is later used in calculating illuminance in lux. diff --git a/drivers/staging/iio/Documentation/light/sysfs-bus-iio-light-tsl2x7x b/drivers/staging/iio/Documentation/light/sysfs-bus-iio-light-tsl2x7x new file mode 100755 index 00000000000..b2798b258bf --- /dev/null +++ b/drivers/staging/iio/Documentation/light/sysfs-bus-iio-light-tsl2x7x @@ -0,0 +1,13 @@ +What: /sys/bus/iio/devices/device[n]/in_illuminance0_calibrate +KernelVersion: 3.3-rc1 +Contact: linux-iio@vger.kernel.org +Description: + Causes an internal calibration of the als gain trim + value which is later used in calculating illuminance in lux. + +What: /sys/bus/iio/devices/device[n]/in_proximity0_calibrate +KernelVersion: 3.3-rc1 +Contact: linux-iio@vger.kernel.org +Description: + Causes a recalculation and adjustment to the + proximity_thresh_rising_value. diff --git a/drivers/staging/iio/Documentation/sysfs-bus-iio b/drivers/staging/iio/Documentation/sysfs-bus-iio deleted file mode 100644 index 46a995d6d26..00000000000 --- a/drivers/staging/iio/Documentation/sysfs-bus-iio +++ /dev/null @@ -1,741 +0,0 @@ -What: /sys/bus/iio/devices/iio:deviceX -KernelVersion: 2.6.35 -Contact: linux-iio@vger.kernel.org -Description: - Hardware chip or device accessed by one communication port. - Corresponds to a grouping of sensor channels. X is the IIO - index of the device. - -What: /sys/bus/iio/devices/triggerX -KernelVersion: 2.6.35 -Contact: linux-iio@vger.kernel.org -Description: - An event driven driver of data capture to an in kernel buffer. - May be provided by a device driver that also has an IIO device - based on hardware generated events (e.g. data ready) or - provided by a separate driver for other hardware (e.g. - periodic timer, GPIO or high resolution timer). - Contains trigger type specific elements. These do not - generalize well and hence are not documented in this file. - X is the IIO index of the trigger. - -What: /sys/bus/iio/devices/iio:deviceX/buffer -KernelVersion: 2.6.35 -Contact: linux-iio@vger.kernel.org -Description: - Directory of attributes relating to the buffer for the device. - -What: /sys/bus/iio/devices/iio:deviceX/name -KernelVersion: 2.6.35 -Contact: linux-iio@vger.kernel.org -Description: - Description of the physical chip / device for device X. - Typically a part number. - -What: /sys/bus/iio/devices/iio:deviceX/sampling_frequency -What: /sys/bus/iio/devices/iio:deviceX/buffer/sampling_frequency -What: /sys/bus/iio/devices/triggerX/sampling_frequency -KernelVersion: 2.6.35 -Contact: linux-iio@vger.kernel.org -Description: - Some devices have internal clocks. This parameter sets the - resulting sampling frequency. In many devices this - parameter has an effect on input filters etc rather than - simply controlling when the input is sampled. As this - effects datardy triggers, hardware buffers and the sysfs - direct access interfaces, it may be found in any of the - relevant directories. If it effects all of the above - then it is to be found in the base device directory. - -What: /sys/bus/iio/devices/iio:deviceX/sampling_frequency_available -What: /sys/.../iio:deviceX/buffer/sampling_frequency_available -What: /sys/bus/iio/devices/triggerX/sampling_frequency_available -KernelVersion: 2.6.35 -Contact: linux-iio@vger.kernel.org -Description: - When the internal sampling clock can only take a small - discrete set of values, this file lists those available. - -What: /sys/bus/iio/devices/iio:deviceX/oversampling_ratio -KernelVersion: 2.6.38 -Contact: linux-iio@vger.kernel.org -Description: - Hardware dependent ADC oversampling. Controls the sampling ratio - of the digital filter if available. - -What: /sys/bus/iio/devices/iio:deviceX/oversampling_ratio_available -KernelVersion: 2.6.38 -Contact: linux-iio@vger.kernel.org -Description: - Hardware dependent values supported by the oversampling filter. - -What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_raw -What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_raw -KernelVersion: 2.6.35 -Contact: linux-iio@vger.kernel.org -Description: - Raw (unscaled no bias removal etc) voltage measurement from - channel Y. In special cases where the channel does not - correspond to externally available input one of the named - versions may be used. The number must always be specified and - unique to allow association with event codes. Units after - application of scale and offset are microvolts. - -What: /sys/bus/iio/devices/iio:deviceX/in_voltageY-voltageZ_raw -KernelVersion: 2.6.35 -Contact: linux-iio@vger.kernel.org -Description: - Raw (unscaled) differential voltage measurement equivalent to - channel Y - channel Z where these channel numbers apply to the - physically equivalent inputs when non differential readings are - separately available. In differential only parts, then all that - is required is a consistent labeling. Units after application - of scale and offset are microvolts. - -What: /sys/bus/iio/devices/iio:deviceX/in_capacitanceY_raw -KernelVersion: 3.2 -Contact: linux-iio@vger.kernel.org -Description: - Raw capacitance measurement from channel Y. Units after - application of scale and offset are nanofarads. - -What: /sys/.../iio:deviceX/in_capacitanceY-in_capacitanceZ_raw -KernelVersion: 3.2 -Contact: linux-iio@vger.kernel.org -Description: - Raw differential capacitance measurement equivalent to - channel Y - channel Z where these channel numbers apply to the - physically equivalent inputs when non differential readings are - separately available. In differential only parts, then all that - is required is a consistent labeling. Units after application - of scale and offset are nanofarads.. - -What: /sys/bus/iio/devices/iio:deviceX/in_temp_raw -What: /sys/bus/iio/devices/iio:deviceX/in_tempX_raw -What: /sys/bus/iio/devices/iio:deviceX/in_temp_x_raw -What: /sys/bus/iio/devices/iio:deviceX/in_temp_y_raw -What: /sys/bus/iio/devices/iio:deviceX/in_temp_z_raw -KernelVersion: 2.6.35 -Contact: linux-iio@vger.kernel.org -Description: - Raw (unscaled no bias removal etc) temperature measurement. - It an axis is specified it generally means that the temperature - sensor is associated with one part of a compound device (e.g. - a gyroscope axis). Units after application of scale and offset - are milli degrees Celsuis. - -What: /sys/bus/iio/devices/iio:deviceX/in_tempX_input -KernelVersion: 2.6.38 -Contact: linux-iio@vger.kernel.org -Description: - Scaled temperature measurement in milli degrees Celsius. - -What: /sys/bus/iio/devices/iio:deviceX/in_accel_x_raw -What: /sys/bus/iio/devices/iio:deviceX/in_accel_y_raw -What: /sys/bus/iio/devices/iio:deviceX/in_accel_z_raw -KernelVersion: 2.6.35 -Contact: linux-iio@vger.kernel.org -Description: - Acceleration in direction x, y or z (may be arbitrarily assigned - but should match other such assignments on device). - Has all of the equivalent parameters as per voltageY. Units - after application of scale and offset are m/s^2. - -What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_x_raw -What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_y_raw -What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_z_raw -KernelVersion: 2.6.35 -Contact: linux-iio@vger.kernel.org -Description: - Angular velocity about axis x, y or z (may be arbitrarily - assigned) Data converted by application of offset then scale to - radians per second. Has all the equivalent parameters as - per voltageY. Units after application of scale and offset are - radians per second. - -What: /sys/bus/iio/devices/iio:deviceX/in_incli_x_raw -What: /sys/bus/iio/devices/iio:deviceX/in_incli_y_raw -What: /sys/bus/iio/devices/iio:deviceX/in_incli_z_raw -KernelVersion: 2.6.35 -Contact: linux-iio@vger.kernel.org -Description: - Inclination raw reading about axis x, y or z (may be - arbitrarily assigned). Data converted by application of offset - and scale to Degrees. - -What: /sys/bus/iio/devices/iio:deviceX/in_magn_x_raw -What: /sys/bus/iio/devices/iio:deviceX/in_magn_y_raw -What: /sys/bus/iio/devices/iio:deviceX/in_magn_z_raw -KernelVersion: 2.6.35 -Contact: linux-iio@vger.kernel.org -Description: - Magnetic field along axis x, y or z (may be arbitrarily - assigned). Data converted by application of offset - then scale to Gauss. - -What: /sys/bus/iio/devices/iio:deviceX/in_accel_x_peak_raw -What: /sys/bus/iio/devices/iio:deviceX/in_accel_y_peak_raw -What: /sys/bus/iio/devices/iio:deviceX/in_accel_z_peak_raw -KernelVersion: 2.6.36 -Contact: linux-iio@vger.kernel.org -Description: - Highest value since some reset condition. These - attributes allow access to this and are otherwise - the direct equivalent of the <type>Y[_name]_raw attributes. - -What: /sys/bus/iio/devices/iio:deviceX/in_accel_xyz_squared_peak_raw -KernelVersion: 2.6.36 -Contact: linux-iio@vger.kernel.org -Description: - A computed peak value based on the sum squared magnitude of - the underlying value in the specified directions. - -What: /sys/bus/iio/devices/iio:deviceX/in_accel_offset -What: /sys/bus/iio/devices/iio:deviceX/in_accel_x_offset -What: /sys/bus/iio/devices/iio:deviceX/in_accel_y_offset -What: /sys/bus/iio/devices/iio:deviceX/in_accel_z_offset -What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_offset -What: /sys/bus/iio/devices/iio:deviceX/in_voltage_offset -What: /sys/bus/iio/devices/iio:deviceX/in_tempY_offset -What: /sys/bus/iio/devices/iio:deviceX/in_temp_offset -KernelVersion: 2.6.35 -Contact: linux-iio@vger.kernel.org -Description: - If known for a device, offset to be added to <type>[Y]_raw prior - to scaling by <type>[Y]_scale in order to obtain value in the - <type> units as specified in <type>[y]_raw documentation. - Not present if the offset is always 0 or unknown. If Y or - axis <x|y|z> is not present, then the offset applies to all - in channels of <type>. - May be writable if a variable offset can be applied on the - device. Note that this is different to calibbias which - is for devices (or drivers) that apply offsets to compensate - for variation between different instances of the part, typically - adjusted by using some hardware supported calibration procedure. - Calibbias is applied internally, offset is applied in userspace - to the _raw output. - -What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_scale -What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_scale -What: /sys/bus/iio/devices/iio:deviceX/in_voltage_scale -What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_scale -What: /sys/bus/iio/devices/iio:deviceX/in_accel_scale -What: /sys/bus/iio/devices/iio:deviceX/in_accel_peak_scale -What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_scale -What: /sys/bus/iio/devices/iio:deviceX/in_magn_scale -What: /sys/bus/iio/devices/iio:deviceX/in_magn_x_scale -What: /sys/bus/iio/devices/iio:deviceX/in_magn_y_scale -What: /sys/bus/iio/devices/iio:deviceX/in_magn_z_scale -KernelVersion: 2.6.35 -Contact: linux-iio@vger.kernel.org -Description: - If known for a device, scale to be applied to <type>Y[_name]_raw - post addition of <type>[Y][_name]_offset in order to obtain the - measured value in <type> units as specified in - <type>[Y][_name]_raw documentation.. If shared across all in - channels then Y and <x|y|z> are not present and the value is - called <type>[Y][_name]_scale. The peak modifier means this - value is applied to <type>Y[_name]_peak_raw values. - -What: /sys/bus/iio/devices/iio:deviceX/in_accel_x_calibbias -What: /sys/bus/iio/devices/iio:deviceX/in_accel_y_calibbias -What: /sys/bus/iio/devices/iio:deviceX/in_accel_z_calibbias -What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_x_calibbias -What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_y_calibbias -What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_z_calibbias -KernelVersion: 2.6.35 -Contact: linux-iio@vger.kernel.org -Description: - Hardware applied calibration offset. (assumed to fix production - inaccuracies). - -What /sys/bus/iio/devices/iio:deviceX/in_voltageY_calibscale -What /sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_calibscale -What /sys/bus/iio/devices/iio:deviceX/in_voltage_calibscale -What /sys/bus/iio/devices/iio:deviceX/in_accel_x_calibscale -What /sys/bus/iio/devices/iio:deviceX/in_accel_y_calibscale -What /sys/bus/iio/devices/iio:deviceX/in_accel_z_calibscale -What /sys/bus/iio/devices/iio:deviceX/in_anglvel_x_calibscale -What /sys/bus/iio/devices/iio:deviceX/in_anglvel_y_calibscale -What /sys/bus/iio/devices/iio:deviceX/in_anglvel_z_calibscale -KernelVersion: 2.6.35 -Contact: linux-iio@vger.kernel.org -Description: - Hardware applied calibration scale factor. (assumed to fix - production inaccuracies). If shared across all channels, - <type>_calibscale is used. - -What: /sys/bus/iio/devices/iio:deviceX/in_accel_scale_available -What: /sys/.../iio:deviceX/in_voltageX_scale_available -What: /sys/.../iio:deviceX/in_voltage-voltage_scale_available -What: /sys/.../iio:deviceX/out_voltageX_scale_available -What: /sys/.../iio:deviceX/in_capacitance_scale_available -KernelVersion: 2.635 -Contact: linux-iio@vger.kernel.org -Description: - If a discrete set of scale values are available, they - are listed in this attribute. - -What: /sys/.../in_accel_filter_low_pass_3db_frequency -What: /sys/.../in_magn_filter_low_pass_3db_frequency -What: /sys/.../in_anglvel_filter_low_pass_3db_frequency -KernelVersion: 3.2 -Contact: linux-iio@vger.kernel.org -Description: - If a known or controllable low pass filter is applied - to the underlying data channel, then this parameter - gives the 3dB frequency of the filter in Hz. - -What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_raw -KernelVersion: 2.6.37 -Contact: linux-iio@vger.kernel.org -Description: - Raw (unscaled, no bias etc.) output voltage for - channel Y. The number must always be specified and - unique if the output corresponds to a single channel. - -What: /sys/bus/iio/devices/iio:deviceX/out_voltageY&Z_raw -KernelVersion: 2.6.37 -Contact: linux-iio@vger.kernel.org -Description: - Raw (unscaled, no bias etc.) output voltage for an aggregate of - channel Y, channel Z, etc. This interface is available in cases - where a single output sets the value for multiple channels - simultaneously. - -What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_powerdown_mode -What: /sys/bus/iio/devices/iio:deviceX/out_voltage_powerdown_mode -KernelVersion: 2.6.38 -Contact: linux-iio@vger.kernel.org -Description: - Specifies the output powerdown mode. - DAC output stage is disconnected from the amplifier and - 1kohm_to_gnd: connected to ground via an 1kOhm resistor - 100kohm_to_gnd: connected to ground via an 100kOhm resistor - three_state: left floating - For a list of available output power down options read - outX_powerdown_mode_available. If Y is not present the - mode is shared across all outputs. - -What: /sys/.../iio:deviceX/out_votlageY_powerdown_mode_available -What: /sys/.../iio:deviceX/out_voltage_powerdown_mode_available -KernelVersion: 2.6.38 -Contact: linux-iio@vger.kernel.org -Description: - Lists all available output power down modes. - If Y is not present the mode is shared across all outputs. - -What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_powerdown -What: /sys/bus/iio/devices/iio:deviceX/out_voltage_powerdown -KernelVersion: 2.6.38 -Contact: linux-iio@vger.kernel.org -Description: - Writing 1 causes output Y to enter the power down mode specified - by the corresponding outY_powerdown_mode. Clearing returns to - normal operation. Y may be suppressed if all outputs are - controlled together. - -What: /sys/bus/iio/devices/iio:deviceX/events -KernelVersion: 2.6.35 -Contact: linux-iio@vger.kernel.org -Description: - Configuration of which hardware generated events are passed up - to user-space. - -What: /sys/.../iio:deviceX/events/in_accel_x_thresh_rising_en -What: /sys/.../iio:deviceX/events/in_accel_x_thresh_falling_en -What: /sys/.../iio:deviceX/events/in_accel_y_thresh_rising_en -What: /sys/.../iio:deviceX/events/in_accel_y_thresh_falling_en -What: /sys/.../iio:deviceX/events/in_accel_z_thresh_rising_en -What: /sys/.../iio:deviceX/events/in_accel_z_thresh_falling_en -What: /sys/.../iio:deviceX/events/in_anglvel_x_thresh_rising_en -What: /sys/.../iio:deviceX/events/in_anglvel_x_thresh_falling_en -What: /sys/.../iio:deviceX/events/in_anglvel_y_thresh_rising_en -What: /sys/.../iio:deviceX/events/in_anglvel_y_thresh_falling_en -What: /sys/.../iio:deviceX/events/in_anglvel_z_thresh_rising_en -What: /sys/.../iio:deviceX/events/in_anglvel_z_thresh_falling_en -What: /sys/.../iio:deviceX/events/in_magn_x_thresh_rising_en -What: /sys/.../iio:deviceX/events/in_magn_x_thresh_falling_en -What: /sys/.../iio:deviceX/events/in_magn_y_thresh_rising_en -What: /sys/.../iio:deviceX/events/in_magn_y_thresh_falling_en -What: /sys/.../iio:deviceX/events/in_magn_z_thresh_rising_en -What: /sys/.../iio:deviceX/events/in_magn_z_thresh_falling_en -What: /sys/.../iio:deviceX/events/in_voltageY_supply_thresh_rising_en -What: /sys/.../iio:deviceX/events/in_voltageY_supply_thresh_falling_en -What: /sys/.../iio:deviceX/events/in_voltageY_thresh_rising_en -What: /sys/.../iio:deviceX/events/in_voltageY_thresh_falling_en -What: /sys/.../iio:deviceX/events/in_tempY_thresh_rising_en -What: /sys/.../iio:deviceX/events/in_tempY_thresh_falling_en -KernelVersion: 2.6.37 -Contact: linux-iio@vger.kernel.org -Description: - Event generated when channel passes a threshold in the specified - (_rising|_falling) direction. If the direction is not specified, - then either the device will report an event which ever direction - a single threshold value is passed in (e.g. - <type>[Y][_name]_<raw|input>_thresh_value) or - <type>[Y][_name]_<raw|input>_thresh_rising_value and - <type>[Y][_name]_<raw|input>_thresh_falling_value may take - different values, but the device can only enable both thresholds - or neither. - Note the driver will assume the last p events requested are - to be enabled where p is however many it supports (which may - vary depending on the exact set requested. So if you want to be - sure you have set what you think you have, check the contents of - these attributes after everything is configured. Drivers may - have to buffer any parameters so that they are consistent when - a given event type is enabled a future point (and not those for - whatever event was previously enabled). - -What: /sys/.../iio:deviceX/events/in_accel_x_roc_rising_en -What: /sys/.../iio:deviceX/events/in_accel_x_roc_falling_en -What: /sys/.../iio:deviceX/events/in_accel_y_roc_rising_en -What: /sys/.../iio:deviceX/events/in_accel_y_roc_falling_en -What: /sys/.../iio:deviceX/events/in_accel_z_roc_rising_en -What: /sys/.../iio:deviceX/events/in_accel_z_roc_falling_en -What: /sys/.../iio:deviceX/events/in_anglvel_x_roc_rising_en -What: /sys/.../iio:deviceX/events/in_anglvel_x_roc_falling_en -What: /sys/.../iio:deviceX/events/in_anglvel_y_roc_rising_en -What: /sys/.../iio:deviceX/events/in_anglvel_y_roc_falling_en -What: /sys/.../iio:deviceX/events/in_anglvel_z_roc_rising_en -What: /sys/.../iio:deviceX/events/in_anglvel_z_roc_falling_en -What: /sys/.../iio:deviceX/events/in_magn_x_roc_rising_en -What: /sys/.../iio:deviceX/events/in_magn_x_roc_falling_en -What: /sys/.../iio:deviceX/events/in_magn_y_roc_rising_en -What: /sys/.../iio:deviceX/events/in_magn_y_roc_falling_en -What: /sys/.../iio:deviceX/events/in_magn_z_roc_rising_en -What: /sys/.../iio:deviceX/events/in_magn_z_roc_falling_en -What: /sys/.../iio:deviceX/events/in_voltageY_supply_roc_rising_en -What: /sys/.../iio:deviceX/events/in_voltageY_supply_roc_falling_en -What: /sys/.../iio:deviceX/events/in_voltageY_roc_rising_en -What: /sys/.../iio:deviceX/events/in_voltageY_roc_falling_en -What: /sys/.../iio:deviceX/events/in_tempY_roc_rising_en -What: /sys/.../iio:deviceX/events/in_tempY_roc_falling_en -KernelVersion: 2.6.37 -Contact: linux-iio@vger.kernel.org -Description: - Event generated when channel passes a threshold on the rate of - change (1st differential) in the specified (_rising|_falling) - direction. If the direction is not specified, then either the - device will report an event which ever direction a single - threshold value is passed in (e.g. - <type>[Y][_name]_<raw|input>_roc_value) or - <type>[Y][_name]_<raw|input>_roc_rising_value and - <type>[Y][_name]_<raw|input>_roc_falling_value may take - different values, but the device can only enable both rate of - change thresholds or neither. - Note the driver will assume the last p events requested are - to be enabled where p is however many it supports (which may - vary depending on the exact set requested. So if you want to be - sure you have set what you think you have, check the contents of - these attributes after everything is configured. Drivers may - have to buffer any parameters so that they are consistent when - a given event type is enabled a future point (and not those for - whatever event was previously enabled). - -What: /sys/.../events/in_accel_x_raw_thresh_rising_value -What: /sys/.../events/in_accel_x_raw_thresh_falling_value -What: /sys/.../events/in_accel_y_raw_thresh_rising_value -What: /sys/.../events/in_accel_y_raw_thresh_falling_value -What: /sys/.../events/in_accel_z_raw_thresh_rising_value -What: /sys/.../events/in_accel_z_raw_thresh_falling_value -What: /sys/.../events/in_anglvel_x_raw_thresh_rising_value -What: /sys/.../events/in_anglvel_x_raw_thresh_falling_value -What: /sys/.../events/in_anglvel_y_raw_thresh_rising_value -What: /sys/.../events/in_anglvel_y_raw_thresh_falling_value -What: /sys/.../events/in_anglvel_z_raw_thresh_rising_value -What: /sys/.../events/in_anglvel_z_raw_thresh_falling_value -What: /sys/.../events/in_magn_x_raw_thresh_rising_value -What: /sys/.../events/in_magn_x_raw_thresh_falling_value -What: /sys/.../events/in_magn_y_raw_thresh_rising_value -What: /sys/.../events/in_magn_y_raw_thresh_falling_value -What: /sys/.../events/in_magn_z_raw_thresh_rising_value -What: /sys/.../events/in_magn_z_raw_thresh_falling_value -What: /sys/.../events/in_voltageY_supply_raw_thresh_rising_value -What: /sys/.../events/in_voltageY_supply_raw_thresh_falling_value -What: /sys/.../events/in_voltageY_raw_thresh_falling_value -What: /sys/.../events/in_voltageY_raw_thresh_falling_value -What: /sys/.../events/in_tempY_raw_thresh_falling_value -What: /sys/.../events/in_tempY_raw_thresh_falling_value -KernelVersion: 2.6.37 -Contact: linux-iio@vger.kernel.org -Description: - Specifies the value of threshold that the device is comparing - against for the events enabled by - <type>Y[_name]_thresh[_rising|falling]_en. - If separate attributes exist for the two directions, but - direction is not specified for this attribute, then a single - threshold value applies to both directions. - The raw or input element of the name indicates whether the - value is in raw device units or in processed units (as _raw - and _input do on sysfs direct channel read attributes). - -What: /sys/.../events/in_accel_x_raw_roc_rising_value -What: /sys/.../events/in_accel_x_raw_roc_falling_value -What: /sys/.../events/in_accel_y_raw_roc_rising_value -What: /sys/.../events/in_accel_y_raw_roc_falling_value -What: /sys/.../events/in_accel_z_raw_roc_rising_value -What: /sys/.../events/in_accel_z_raw_roc_falling_value -What: /sys/.../events/in_anglvel_x_raw_roc_rising_value -What: /sys/.../events/in_anglvel_x_raw_roc_falling_value -What: /sys/.../events/in_anglvel_y_raw_roc_rising_value -What: /sys/.../events/in_anglvel_y_raw_roc_falling_value -What: /sys/.../events/in_anglvel_z_raw_roc_rising_value -What: /sys/.../events/in_anglvel_z_raw_roc_falling_value -What: /sys/.../events/in_magn_x_raw_roc_rising_value -What: /sys/.../events/in_magn_x_raw_roc_falling_value -What: /sys/.../events/in_magn_y_raw_roc_rising_value -What: /sys/.../events/in_magn_y_raw_roc_falling_value -What: /sys/.../events/in_magn_z_raw_roc_rising_value -What: /sys/.../events/in_magn_z_raw_roc_falling_value -What: /sys/.../events/in_voltageY_supply_raw_roc_rising_value -What: /sys/.../events/in_voltageY_supply_raw_roc_falling_value -What: /sys/.../events/in_voltageY_raw_roc_falling_value -What: /sys/.../events/in_voltageY_raw_roc_falling_value -What: /sys/.../events/in_tempY_raw_roc_falling_value -What: /sys/.../events/in_tempY_raw_roc_falling_value -KernelVersion: 2.6.37 -Contact: linux-iio@vger.kernel.org -Description: - Specifies the value of rate of change threshold that the - device is comparing against for the events enabled by - <type>[Y][_name]_roc[_rising|falling]_en. - If separate attributes exist for the two directions, - but direction is not specified for this attribute, - then a single threshold value applies to both directions. - The raw or input element of the name indicates whether the - value is in raw device units or in processed units (as _raw - and _input do on sysfs direct channel read attributes). - -What: /sys/.../events/in_accel_x_thresh_rising_period -What: /sys/.../events/in_accel_x_thresh_falling_period -hat: /sys/.../events/in_accel_x_roc_rising_period -What: /sys/.../events/in_accel_x_roc_falling_period -What: /sys/.../events/in_accel_y_thresh_rising_period -What: /sys/.../events/in_accel_y_thresh_falling_period -What: /sys/.../events/in_accel_y_roc_rising_period -What: /sys/.../events/in_accel_y_roc_falling_period -What: /sys/.../events/in_accel_z_thresh_rising_period -What: /sys/.../events/in_accel_z_thresh_falling_period -What: /sys/.../events/in_accel_z_roc_rising_period -What: /sys/.../events/in_accel_z_roc_falling_period -What: /sys/.../events/in_anglvel_x_thresh_rising_period -What: /sys/.../events/in_anglvel_x_thresh_falling_period -What: /sys/.../events/in_anglvel_x_roc_rising_period -What: /sys/.../events/in_anglvel_x_roc_falling_period -What: /sys/.../events/in_anglvel_y_thresh_rising_period -What: /sys/.../events/in_anglvel_y_thresh_falling_period -What: /sys/.../events/in_anglvel_y_roc_rising_period -What: /sys/.../events/in_anglvel_y_roc_falling_period -What: /sys/.../events/in_anglvel_z_thresh_rising_period -What: /sys/.../events/in_anglvel_z_thresh_falling_period -What: /sys/.../events/in_anglvel_z_roc_rising_period -What: /sys/.../events/in_anglvel_z_roc_falling_period -What: /sys/.../events/in_magn_x_thresh_rising_period -What: /sys/.../events/in_magn_x_thresh_falling_period -What: /sys/.../events/in_magn_x_roc_rising_period -What: /sys/.../events/in_magn_x_roc_falling_period -What: /sys/.../events/in_magn_y_thresh_rising_period -What: /sys/.../events/in_magn_y_thresh_falling_period -What: /sys/.../events/in_magn_y_roc_rising_period -What: /sys/.../events/in_magn_y_roc_falling_period -What: /sys/.../events/in_magn_z_thresh_rising_period -What: /sys/.../events/in_magn_z_thresh_falling_period -What: /sys/.../events/in_magn_z_roc_rising_period -What: /sys/.../events/in_magn_z_roc_falling_period -What: /sys/.../events/in_voltageY_supply_thresh_rising_period -What: /sys/.../events/in_voltageY_supply_thresh_falling_period -What: /sys/.../events/in_voltageY_supply_roc_rising_period -What: /sys/.../events/in_voltageY_supply_roc_falling_period -What: /sys/.../events/in_voltageY_thresh_rising_period -What: /sys/.../events/in_voltageY_thresh_falling_period -What: /sys/.../events/in_voltageY_roc_rising_period -What: /sys/.../events/in_voltageY_roc_falling_period -What: /sys/.../events/in_tempY_thresh_rising_period -What: /sys/.../events/in_tempY_thresh_falling_period -What: /sys/.../events/in_tempY_roc_rising_period -What: /sys/.../events/in_tempY_roc_falling_period -What: /sys/.../events/in_accel_x&y&z_mag_falling_period -KernelVersion: 2.6.37 -Contact: linux-iio@vger.kernel.org -Description: - Period of time (in seconds) for which the condition must be - met before an event is generated. If direction is not - specified then this period applies to both directions. - -What: /sys/.../iio:deviceX/events/in_accel_mag_en -What: /sys/.../iio:deviceX/events/in_accel_mag_rising_en -What: /sys/.../iio:deviceX/events/in_accel_mag_falling_en -What: /sys/.../iio:deviceX/events/in_accel_x_mag_en -What: /sys/.../iio:deviceX/events/in_accel_x_mag_rising_en -What: /sys/.../iio:deviceX/events/in_accel_x_mag_falling_en -What: /sys/.../iio:deviceX/events/in_accel_y_mag_en -What: /sys/.../iio:deviceX/events/in_accel_y_mag_rising_en -What: /sys/.../iio:deviceX/events/in_accel_y_mag_falling_en -What: /sys/.../iio:deviceX/events/in_accel_z_mag_en -What: /sys/.../iio:deviceX/events/in_accel_z_mag_rising_en -What: /sys/.../iio:deviceX/events/in_accel_z_mag_falling_en -What: /sys/.../iio:deviceX/events/in_accel_x&y&z_mag_rising_en -What: /sys/.../iio:deviceX/events/in_accel_x&y&z_mag_falling_en -KernelVersion: 2.6.37 -Contact: linux-iio@vger.kernel.org -Description: - Similar to in_accel_x_thresh[_rising|_falling]_en, but here the - magnitude of the channel is compared to the threshold, not its - signed value. - -What: /sys/.../events/in_accel_raw_mag_value -What: /sys/.../events/in_accel_x_raw_mag_rising_value -What: /sys/.../events/in_accel_y_raw_mag_rising_value -What: /sys/.../events/in_accel_z_raw_mag_rising_value -KernelVersion: 2.6.37 -Contact: linux-iio@vger.kernel.org -Description: - The value to which the magnitude of the channel is compared. If - number or direction is not specified, applies to all channels of - this type. - -What: /sys/bus/iio/devices/iio:deviceX/trigger/current_trigger -KernelVersion: 2.6.35 -Contact: linux-iio@vger.kernel.org -Description: - The name of the trigger source being used, as per string given - in /sys/class/iio/triggerY/name. - -What: /sys/bus/iio/devices/iio:deviceX/buffer/length -KernelVersion: 2.6.35 -Contact: linux-iio@vger.kernel.org -Description: - Number of scans contained by the buffer. - -What: /sys/bus/iio/devices/iio:deviceX/buffer/bytes_per_datum -KernelVersion: 2.6.37 -Contact: linux-iio@vger.kernel.org -Description: - Bytes per scan. Due to alignment fun, the scan may be larger - than implied directly by the scan_element parameters. - -What: /sys/bus/iio/devices/iio:deviceX/buffer/enable -KernelVersion: 2.6.35 -Contact: linux-iio@vger.kernel.org -Description: - Actually start the buffer capture up. Will start trigger - if first device and appropriate. - -What: /sys/bus/iio/devices/iio:deviceX/buffer/scan_elements -KernelVersion: 2.6.37 -Contact: linux-iio@vger.kernel.org -Description: - Directory containing interfaces for elements that will be - captured for a single triggered sample set in the buffer. - -What: /sys/.../buffer/scan_elements/in_accel_x_en -What: /sys/.../buffer/scan_elements/in_accel_y_en -What: /sys/.../buffer/scan_elements/in_accel_z_en -What: /sys/.../buffer/scan_elements/in_anglvel_x_en -What: /sys/.../buffer/scan_elements/in_anglvel_y_en -What: /sys/.../buffer/scan_elements/in_anglvel_z_en -What: /sys/.../buffer/scan_elements/in_magn_x_en -What: /sys/.../buffer/scan_elements/in_magn_y_en -What: /sys/.../buffer/scan_elements/in_magn_z_en -What: /sys/.../buffer/scan_elements/in_timestamp_en -What: /sys/.../buffer/scan_elements/in_voltageY_supply_en -What: /sys/.../buffer/scan_elements/in_voltageY_en -What: /sys/.../buffer/scan_elements/in_voltageY-voltageZ_en -What: /sys/.../buffer/scan_elements/in_incli_x_en -What: /sys/.../buffer/scan_elements/in_incli_y_en -KernelVersion: 2.6.37 -Contact: linux-iio@vger.kernel.org -Description: - Scan element control for triggered data capture. - -What: /sys/.../buffer/scan_elements/in_accel_type -What: /sys/.../buffer/scan_elements/in_anglvel_type -What: /sys/.../buffer/scan_elements/in_magn_type -What: /sys/.../buffer/scan_elements/in_incli_type -What: /sys/.../buffer/scan_elements/in_voltageY_type -What: /sys/.../buffer/scan_elements/in_voltage-in_type -What: /sys/.../buffer/scan_elements/in_voltageY_supply_type -What: /sys/.../buffer/scan_elements/in_timestamp_type -KernelVersion: 2.6.37 -Contact: linux-iio@vger.kernel.org -Description: - Description of the scan element data storage within the buffer - and hence the form in which it is read from user-space. - Form is [be|le]:[s|u]bits/storagebits[>>shift]. - be or le specifies big or little endian. s or u specifies if - signed (2's complement) or unsigned. bits is the number of bits - of data and storagebits is the space (after padding) that it - occupies in the buffer. shift if specified, is the shift that - needs to be applied prior to masking out unused bits. Some - devices put their data in the middle of the transferred elements - with additional information on both sides. Note that some - devices will have additional information in the unused bits - so to get a clean value, the bits value must be used to mask - the buffer output value appropriately. The storagebits value - also specifies the data alignment. So s48/64>>2 will be a - signed 48 bit integer stored in a 64 bit location aligned to - a a64 bit boundary. To obtain the clean value, shift right 2 - and apply a mask to zero the top 16 bits of the result. - For other storage combinations this attribute will be extended - appropriately. - -What: /sys/.../buffer/scan_elements/in_accel_type_available -KernelVersion: 2.6.37 -Contact: linux-iio@vger.kernel.org -Description: - If the type parameter can take one of a small set of values, - this attribute lists them. - -What: /sys/.../buffer/scan_elements/in_voltageY_index -What: /sys/.../buffer/scan_elements/in_voltageY_supply_index -What: /sys/.../buffer/scan_elements/in_accel_x_index -What: /sys/.../buffer/scan_elements/in_accel_y_index -What: /sys/.../buffer/scan_elements/in_accel_z_index -What: /sys/.../buffer/scan_elements/in_anglvel_x_index -What: /sys/.../buffer/scan_elements/in_anglvel_y_index -What: /sys/.../buffer/scan_elements/in_anglvel_z_index -What: /sys/.../buffer/scan_elements/in_magn_x_index -What: /sys/.../buffer/scan_elements/in_magn_y_index -What: /sys/.../buffer/scan_elements/in_magn_z_index -What: /sys/.../buffer/scan_elements/in_incli_x_index -What: /sys/.../buffer/scan_elements/in_incli_y_index -What: /sys/.../buffer/scan_elements/in_timestamp_index -KernelVersion: 2.6.37 -Contact: linux-iio@vger.kernel.org -Description: - A single positive integer specifying the position of this - scan element in the buffer. Note these are not dependent on - what is enabled and may not be contiguous. Thus for user-space - to establish the full layout these must be used in conjunction - with all _en attributes to establish which channels are present, - and the relevant _type attributes to establish the data storage - format. - -What: /sys/.../iio:deviceX/in_anglvel_z_quadrature_correction_raw -KernelVersion: 2.6.38 -Contact: linux-iio@vger.kernel.org -Description: - This attribute is used to read the amount of quadrature error - present in the device at a given time. - -What: /sys/.../iio:deviceX/ac_excitation_en -KernelVersion: 3.1.0 -Contact: linux-iio@vger.kernel.org -Description: - This attribute, if available, is used to enable the AC - excitation mode found on some converters. In ac excitation mode, - the polarity of the excitation voltage is reversed on - alternate cycles, to eliminate DC errors. - -What: /sys/.../iio:deviceX/bridge_switch_en -KernelVersion: 3.1.0 -Contact: linux-iio@vger.kernel.org -Description: - This attribute, if available, is used to close or open the - bridge power down switch found on some converters. - In bridge applications, such as strain gauges and load cells, - the bridge itself consumes the majority of the current in the - system. To minimize the current consumption of the system, - the bridge can be disconnected (when it is not being used - using the bridge_switch_en attribute. diff --git a/drivers/staging/iio/Documentation/sysfs-bus-iio-ad7192 b/drivers/staging/iio/Documentation/sysfs-bus-iio-ad7192 new file mode 100644 index 00000000000..1c35c507cc0 --- /dev/null +++ b/drivers/staging/iio/Documentation/sysfs-bus-iio-ad7192 @@ -0,0 +1,20 @@ +What: /sys/.../iio:deviceX/ac_excitation_en +KernelVersion: 3.1.0 +Contact: linux-iio@vger.kernel.org +Description: + This attribute, if available, is used to enable the AC + excitation mode found on some converters. In ac excitation mode, + the polarity of the excitation voltage is reversed on + alternate cycles, to eliminate DC errors. + +What: /sys/.../iio:deviceX/bridge_switch_en +KernelVersion: 3.1.0 +Contact: linux-iio@vger.kernel.org +Description: + This attribute, if available, is used to close or open the + bridge power down switch found on some converters. + In bridge applications, such as strain gauges and load cells, + the bridge itself consumes the majority of the current in the + system. To minimize the current consumption of the system, + the bridge can be disconnected (when it is not being used + using the bridge_switch_en attribute. diff --git a/drivers/staging/iio/Documentation/sysfs-bus-iio-dds b/drivers/staging/iio/Documentation/sysfs-bus-iio-dds index ffdd5478a35..ee8c509c673 100644 --- a/drivers/staging/iio/Documentation/sysfs-bus-iio-dds +++ b/drivers/staging/iio/Documentation/sysfs-bus-iio-dds @@ -1,83 +1,86 @@ -What: /sys/bus/iio/devices/.../ddsX_freqY +What: /sys/bus/iio/devices/.../out_altvoltageX_frequencyY KernelVersion: 2.6.37 Contact: linux-iio@vger.kernel.org Description: Stores frequency into tuning word Y. - There will be more than one ddsX_freqY file, which allows for - pin controlled FSK Frequency Shift Keying - (ddsX_pincontrol_freq_en is active) or the user can control - the desired active tuning word by writing Y to the - ddsX_freqsymbol file. + There will be more than one out_altvoltageX_frequencyY file, + which allows for pin controlled FSK Frequency Shift Keying + (out_altvoltageX_pincontrol_frequency_en is active) or the user + can control the desired active tuning word by writing Y to the + out_altvoltageX_frequencysymbol file. -What: /sys/bus/iio/devices/.../ddsX_freqY_scale +What: /sys/bus/iio/devices/.../out_altvoltageX_frequencyY_scale KernelVersion: 2.6.37 Contact: linux-iio@vger.kernel.org Description: - Scale to be applied to ddsX_freqY in order to obtain the - desired value in Hz. If shared across all frequency registers - Y is not present. It is also possible X is not present if - shared across all channels. + Scale to be applied to out_altvoltageX_frequencyY in order to + obtain the desired value in Hz. If shared across all frequency + registers Y is not present. It is also possible X is not present + if shared across all channels. -What: /sys/bus/iio/devices/.../ddsX_freqsymbol +What: /sys/bus/iio/devices/.../out_altvoltageX_frequencysymbol KernelVersion: 2.6.37 Contact: linux-iio@vger.kernel.org Description: Specifies the active output frequency tuning word. The value - corresponds to the Y in ddsX_freqY. To exit this mode the user - can write ddsX_pincontrol_freq_en or ddsX_out_enable file. + corresponds to the Y in out_altvoltageX_frequencyY. + To exit this mode the user can write + out_altvoltageX_pincontrol_frequency_en or + out_altvoltageX_out_enable file. -What: /sys/bus/iio/devices/.../ddsX_phaseY +What: /sys/bus/iio/devices/.../out_altvoltageX_phaseY KernelVersion: 2.6.37 Contact: linux-iio@vger.kernel.org Description: Stores phase into Y. - There will be more than one ddsX_phaseY file, which allows for - pin controlled PSK Phase Shift Keying - (ddsX_pincontrol_phase_en is active) or the user can + There will be more than one out_altvoltageX_phaseY file, which + allows for pin controlled PSK Phase Shift Keying + (out_altvoltageX_pincontrol_phase_en is active) or the user can control the desired phase Y which is added to the phase - accumulator output by writing Y to the en_phase file. + accumulator output by writing Y to the phase_en file. -What: /sys/bus/iio/devices/.../ddsX_phaseY_scale +What: /sys/bus/iio/devices/.../out_altvoltageX_phaseY_scale KernelVersion: 2.6.37 Contact: linux-iio@vger.kernel.org Description: - Scale to be applied to ddsX_phaseY in order to obtain the - desired value in rad. If shared across all phase registers + Scale to be applied to out_altvoltageX_phaseY in order to obtain + the desired value in rad. If shared across all phase registers Y is not present. It is also possible X is not present if shared across all channels. -What: /sys/bus/iio/devices/.../ddsX_phasesymbol +What: /sys/bus/iio/devices/.../out_altvoltageX_phasesymbol KernelVersion: 2.6.37 Contact: linux-iio@vger.kernel.org Description: Specifies the active phase Y which is added to the phase accumulator output. The value corresponds to the Y in - ddsX_phaseY. To exit this mode the user can write - ddsX_pincontrol_phase_en or disable file. + out_altvoltageX_phaseY. To exit this mode the user can write + out_altvoltageX_pincontrol_phase_en or disable file. -What: /sys/bus/iio/devices/.../ddsX_pincontrol_en -What: /sys/bus/iio/devices/.../ddsX_pincontrol_freq_en -What: /sys/bus/iio/devices/.../ddsX_pincontrol_phase_en +What: /sys/bus/iio/devices/.../out_altvoltageX_pincontrol_en +What: /sys/bus/iio/devices/.../out_altvoltageX_pincontrol_frequency_en +What: /sys/bus/iio/devices/.../out_altvoltageX_pincontrol_phase_en KernelVersion: 2.6.37 Contact: linux-iio@vger.kernel.org Description: - ddsX_pincontrol_en: Both, the active frequency and phase is - controlled by the respective phase and frequency control inputs. - In case the device in question allows to independent controls, - then there are dedicated files (ddsX_pincontrol_freq_en, - ddsX_pincontrol_phase_en). + out_altvoltageX_pincontrol_en: Both, the active frequency and + phase is controlled by the respective phase and frequency + control inputs. In case the device in features independent + controls, then there are dedicated files + (out_altvoltageX_pincontrol_frequency_en, + out_altvoltageX_pincontrol_phase_en). -What: /sys/bus/iio/devices/.../ddsX_out_enable -What: /sys/bus/iio/devices/.../ddsX_outY_enable +What: /sys/bus/iio/devices/.../out_altvoltageX_out_enable +What: /sys/bus/iio/devices/.../out_altvoltageX_outY_enable KernelVersion: 2.6.37 Contact: linux-iio@vger.kernel.org Description: - ddsX_outY_enable controls signal generation on output Y of - channel X. Y may be suppressed if all channels are + out_altvoltageX_outY_enable controls signal generation on + output Y of channel X. Y may be suppressed if all channels are controlled together. -What: /sys/bus/iio/devices/.../ddsX_outY_wavetype +What: /sys/bus/iio/devices/.../out_altvoltageX_outY_wavetype KernelVersion: 2.6.37 Contact: linux-iio@vger.kernel.org Description: @@ -86,7 +89,7 @@ Description: For a list of available output waveform options read available_output_modes. -What: /sys/bus/iio/devices/.../ddsX_outY_wavetype_available +What: /sys/bus/iio/devices/.../out_altvoltageX_outY_wavetype_available KernelVersion: 2.6.37 Contact: linux-iio@vger.kernel.org Description: diff --git a/drivers/staging/iio/Documentation/sysfs-bus-iio-light b/drivers/staging/iio/Documentation/sysfs-bus-iio-light index edbf470e4e3..715c74dcb53 100644 --- a/drivers/staging/iio/Documentation/sysfs-bus-iio-light +++ b/drivers/staging/iio/Documentation/sysfs-bus-iio-light @@ -26,7 +26,7 @@ Description: Hardware dependent list of possible values supported for the adc_resolution of the given sensor. -What: /sys/bus/iio/devices/device[n]/illuminance0[_input|_raw] +What: /sys/bus/iio/devices/device[n]/in_illuminance0[_input|_raw] KernelVersion: 2.6.35 Contact: linux-iio@vger.kernel.org Description: @@ -45,7 +45,7 @@ Description: do this calculation manually by reading the infrared sensor value and doing the negation in sw. -What: /sys/bus/iio/devices/device[n]/proximity[_input|_raw] +What: /sys/bus/iio/devices/device[n]/in_proximity[_input|_raw] KernelVersion: 2.6.37 Contact: linux-iio@vger.kernel.org Description: @@ -63,23 +63,22 @@ Description: and if expressed in SI units, should include _input. If this value is not in SI units, then it should include _raw. -What: /sys/bus/iio/devices/device[n]/illuminance0_target +What: /sys/bus/iio/devices/device[n]/in_illuminance0_target KernelVersion: 2.6.37 Contact: linux-iio@vger.kernel.org Description: This property gets/sets the last known external lux measurement used in/for calibration. -What: /sys/bus/iio/devices/device[n]/illuminance0_integration_time +What: /sys/bus/iio/devices/device[n]/in_illuminance0_integration_time KernelVersion: 2.6.37 Contact: linux-iio@vger.kernel.org Description: This property gets/sets the sensors ADC analog integration time. -What: /sys/bus/iio/devices/device[n]/illuminance0_calibscale +What: /sys/bus/iio/devices/device[n]/in_illuminance0_lux_table KernelVersion: 2.6.37 Contact: linux-iio@vger.kernel.org Description: - Hardware or software applied calibration scale factor assumed - to account for attenuation due to industrial design (glass - filters or aperture holes). + This property gets/sets the table of coefficients + used in calculating illuminance in lux. diff --git a/drivers/staging/iio/Documentation/trigger.txt b/drivers/staging/iio/Documentation/trigger.txt index fc2012ebc10..75cc37ff1ed 100644 --- a/drivers/staging/iio/Documentation/trigger.txt +++ b/drivers/staging/iio/Documentation/trigger.txt @@ -5,7 +5,7 @@ an IIO device. Whilst this can create device specific complexities such triggers are registered with the core in the same way as stand-alone triggers. -struct iio_trig *trig = iio_allocate_trigger("<trigger format string>", ...); +struct iio_trig *trig = iio_trigger_alloc("<trigger format string>", ...); allocates a trigger structure. The key elements to then fill in within a driver are: diff --git a/drivers/staging/iio/Kconfig b/drivers/staging/iio/Kconfig index fe158671888..3c8e5ec26ac 100644 --- a/drivers/staging/iio/Kconfig +++ b/drivers/staging/iio/Kconfig @@ -1,16 +1,9 @@ # # Industrial I/O subsytem configuration # +menu "IIO staging drivers" + depends on IIO -menuconfig IIO - tristate "Industrial I/O support" - depends on GENERIC_HARDIRQS - help - The industrial I/O subsystem provides a unified framework for - drivers for many different types of embedded sensors using a - number of different physical interfaces (i2c, spi, etc). See - drivers/staging/iio/Documentation for more information. -if IIO config IIO_ST_HWMON tristate "Hwmon driver that uses channels specified via iio maps" depends on HWMON @@ -19,12 +12,6 @@ config IIO_ST_HWMON map allows IIO devices to provide basic hwmon functionality for those channels specified in the map. -config IIO_BUFFER - bool "Enable buffer support within IIO" - help - Provide core support for various buffer based data - acquisition methods. - if IIO_BUFFER config IIO_SW_RING @@ -36,39 +23,14 @@ config IIO_SW_RING with the intention that some devices would be able to write in interrupt context. -config IIO_KFIFO_BUF - select IIO_TRIGGER - tristate "Industrial I/O buffering based on kfifo" - help - A simple fifo based on kfifo. Use this if you want a fifo - rather than a ring buffer. Note that this currently provides - no buffer events so it is up to userspace to work out how - often to read from the buffer. - endif # IIO_BUFFER -config IIO_TRIGGER - boolean "Enable triggered sampling support" - help - Provides IIO core support for triggers. Currently these - are used to initialize capture of samples to push into - ring buffers. The triggers are effectively a 'capture - data now' interrupt. - -config IIO_CONSUMERS_PER_TRIGGER - int "Maximum number of consumers per trigger" - depends on IIO_TRIGGER - default "2" - help - This value controls the maximum number of consumers that a - given trigger may handle. Default is 2. - source "drivers/staging/iio/accel/Kconfig" source "drivers/staging/iio/adc/Kconfig" source "drivers/staging/iio/addac/Kconfig" source "drivers/staging/iio/cdc/Kconfig" source "drivers/staging/iio/dac/Kconfig" -source "drivers/staging/iio/dds/Kconfig" +source "drivers/staging/iio/frequency/Kconfig" source "drivers/staging/iio/gyro/Kconfig" source "drivers/staging/iio/impedance-analyzer/Kconfig" source "drivers/staging/iio/imu/Kconfig" @@ -104,4 +66,4 @@ config IIO_SIMPLE_DUMMY_BUFFER endif # IIO_SIMPLE_DUMMY -endif # IIO +endmenu diff --git a/drivers/staging/iio/Makefile b/drivers/staging/iio/Makefile index 5075291dda7..6a46d5afb38 100644 --- a/drivers/staging/iio/Makefile +++ b/drivers/staging/iio/Makefile @@ -2,13 +2,7 @@ # Makefile for the industrial I/O core. # -obj-$(CONFIG_IIO) += industrialio.o -industrialio-y := industrialio-core.o industrialio-event.o inkern.o -industrialio-$(CONFIG_IIO_BUFFER) += industrialio-buffer.o -industrialio-$(CONFIG_IIO_TRIGGER) += industrialio-trigger.o - obj-$(CONFIG_IIO_SW_RING) += ring_sw.o -obj-$(CONFIG_IIO_KFIFO_BUF) += kfifo_buf.o obj-$(CONFIG_IIO_SIMPLE_DUMMY) += iio_dummy.o iio_dummy-y := iio_simple_dummy.o @@ -24,7 +18,7 @@ obj-y += adc/ obj-y += addac/ obj-y += cdc/ obj-y += dac/ -obj-y += dds/ +obj-y += frequency/ obj-y += gyro/ obj-y += impedance-analyzer/ obj-y += imu/ diff --git a/drivers/staging/iio/accel/adis16201_core.c b/drivers/staging/iio/accel/adis16201_core.c index d439e45d07f..62667803c5a 100644 --- a/drivers/staging/iio/accel/adis16201_core.c +++ b/drivers/staging/iio/accel/adis16201_core.c @@ -15,9 +15,9 @@ #include <linux/sysfs.h> #include <linux/module.h> -#include "../iio.h" -#include "../sysfs.h" -#include "../buffer.h" +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/buffer.h> #include "adis16201.h" @@ -298,7 +298,7 @@ static int adis16201_read_raw(struct iio_dev *indio_dev, s16 val16; switch (mask) { - case 0: + case IIO_CHAN_INFO_RAW: mutex_lock(&indio_dev->mlock); addr = adis16201_addresses[chan->address][0]; ret = adis16201_spi_read_reg_16(indio_dev, addr, &val16); @@ -406,39 +406,104 @@ static int adis16201_write_raw(struct iio_dev *indio_dev, } static struct iio_chan_spec adis16201_channels[] = { - IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, "supply", 0, 0, + { + .type = IIO_VOLTAGE, + .indexed = 1, + .channel = 0, + .extend_name = "supply", + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | IIO_CHAN_INFO_SCALE_SEPARATE_BIT, - in_supply, ADIS16201_SCAN_SUPPLY, - IIO_ST('u', 12, 16, 0), 0), - IIO_CHAN(IIO_TEMP, 0, 1, 0, NULL, 0, 0, + .address = in_supply, + .scan_index = ADIS16201_SCAN_SUPPLY, + .scan_type = { + .sign = 'u', + .realbits = 12, + .storagebits = 16, + }, + }, { + .type = IIO_TEMP, + .indexed = 1, + .channel = 0, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | IIO_CHAN_INFO_SCALE_SEPARATE_BIT | IIO_CHAN_INFO_OFFSET_SEPARATE_BIT, - temp, ADIS16201_SCAN_TEMP, - IIO_ST('u', 12, 16, 0), 0), - IIO_CHAN(IIO_ACCEL, 1, 0, 0, NULL, 0, IIO_MOD_X, + .address = temp, + .scan_index = ADIS16201_SCAN_TEMP, + .scan_type = { + .sign = 'u', + .realbits = 12, + .storagebits = 16, + }, + }, { + .type = IIO_ACCEL, + .modified = 1, + .channel2 = IIO_MOD_X, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | IIO_CHAN_INFO_SCALE_SHARED_BIT | IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT, - accel_x, ADIS16201_SCAN_ACC_X, - IIO_ST('s', 14, 16, 0), 0), - IIO_CHAN(IIO_ACCEL, 1, 0, 0, NULL, 0, IIO_MOD_Y, + .address = accel_x, + .scan_index = ADIS16201_SCAN_ACC_X, + .scan_type = { + .sign = 's', + .realbits = 14, + .storagebits = 16, + }, + }, { + .type = IIO_ACCEL, + .modified = 1, + .channel2 = IIO_MOD_Y, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | IIO_CHAN_INFO_SCALE_SHARED_BIT | IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT, - accel_y, ADIS16201_SCAN_ACC_Y, - IIO_ST('s', 14, 16, 0), 0), - IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, NULL, 1, 0, + .address = accel_y, + .scan_index = ADIS16201_SCAN_ACC_Y, + .scan_type = { + .sign = 's', + .realbits = 14, + .storagebits = 16, + }, + }, { + .type = IIO_VOLTAGE, + .indexed = 1, + .channel = 1, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | IIO_CHAN_INFO_SCALE_SEPARATE_BIT, - in_aux, ADIS16201_SCAN_AUX_ADC, - IIO_ST('u', 12, 16, 0), 0), - IIO_CHAN(IIO_INCLI, 1, 0, 0, NULL, 0, IIO_MOD_X, + .address = in_aux, + .scan_index = ADIS16201_SCAN_AUX_ADC, + .scan_type = { + .sign = 'u', + .realbits = 12, + .storagebits = 16, + }, + }, { + .type = IIO_INCLI, + .modified = 1, + .channel2 = IIO_MOD_X, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | IIO_CHAN_INFO_SCALE_SHARED_BIT | IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT, - incli_x, ADIS16201_SCAN_INCLI_X, - IIO_ST('s', 14, 16, 0), 0), - IIO_CHAN(IIO_INCLI, 1, 0, 0, NULL, 0, IIO_MOD_Y, + .address = incli_x, + .scan_index = ADIS16201_SCAN_INCLI_X, + .scan_type = { + .sign = 's', + .realbits = 14, + .storagebits = 16, + }, + }, { + .type = IIO_INCLI, + .modified = 1, + .channel2 = IIO_MOD_Y, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | IIO_CHAN_INFO_SCALE_SHARED_BIT | IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT, - incli_y, ADIS16201_SCAN_INCLI_Y, - IIO_ST('s', 14, 16, 0), 0), + .address = incli_y, + .scan_index = ADIS16201_SCAN_INCLI_Y, + .scan_type = { + .sign = 's', + .realbits = 14, + .storagebits = 16, + }, + }, IIO_CHAN_SOFT_TIMESTAMP(7) }; @@ -467,7 +532,7 @@ static int __devinit adis16201_probe(struct spi_device *spi) struct iio_dev *indio_dev; /* setup the industrialio driver allocated elements */ - indio_dev = iio_allocate_device(sizeof(*st)); + indio_dev = iio_device_alloc(sizeof(*st)); if (indio_dev == NULL) { ret = -ENOMEM; goto error_ret; @@ -522,7 +587,7 @@ error_uninitialize_ring: error_unreg_ring_funcs: adis16201_unconfigure_ring(indio_dev); error_free_dev: - iio_free_device(indio_dev); + iio_device_free(indio_dev); error_ret: return ret; } @@ -535,7 +600,7 @@ static int adis16201_remove(struct spi_device *spi) adis16201_remove_trigger(indio_dev); iio_buffer_unregister(indio_dev); adis16201_unconfigure_ring(indio_dev); - iio_free_device(indio_dev); + iio_device_free(indio_dev); return 0; } diff --git a/drivers/staging/iio/accel/adis16201_ring.c b/drivers/staging/iio/accel/adis16201_ring.c index 97f9e6b159d..247602a8e54 100644 --- a/drivers/staging/iio/accel/adis16201_ring.c +++ b/drivers/staging/iio/accel/adis16201_ring.c @@ -5,9 +5,9 @@ #include <linux/spi/spi.h> #include <linux/slab.h> -#include "../iio.h" +#include <linux/iio/iio.h> #include "../ring_sw.h" -#include "../trigger_consumer.h" +#include <linux/iio/trigger_consumer.h> #include "adis16201.h" @@ -66,9 +66,8 @@ static irqreturn_t adis16201_trigger_handler(int irq, void *p) int i = 0; s16 *data; - size_t datasize = ring->access->get_bytes_per_datum(ring); - data = kmalloc(datasize, GFP_KERNEL); + data = kmalloc(indio_dev->scan_bytes, GFP_KERNEL); if (data == NULL) { dev_err(&st->us->dev, "memory alloc failed in ring bh"); return -ENOMEM; @@ -81,7 +80,7 @@ static irqreturn_t adis16201_trigger_handler(int irq, void *p) data[i] = be16_to_cpup((__be16 *)&(st->rx[i*2])); /* Guaranteed to be aligned with 8 byte boundary */ - if (ring->scan_timestamp) + if (indio_dev->scan_timestamp) *((s64 *)(data + ((i + 3)/4)*4)) = pf->timestamp; ring->access->store_to(ring, (u8 *)data, pf->timestamp); diff --git a/drivers/staging/iio/accel/adis16201_trigger.c b/drivers/staging/iio/accel/adis16201_trigger.c index bce505e716d..96fdabbac20 100644 --- a/drivers/staging/iio/accel/adis16201_trigger.c +++ b/drivers/staging/iio/accel/adis16201_trigger.c @@ -3,8 +3,8 @@ #include <linux/spi/spi.h> #include <linux/export.h> -#include "../iio.h" -#include "../trigger.h" +#include <linux/iio/iio.h> +#include <linux/iio/trigger.h> #include "adis16201.h" /** @@ -29,7 +29,7 @@ int adis16201_probe_trigger(struct iio_dev *indio_dev) int ret; struct adis16201_state *st = iio_priv(indio_dev); - st->trig = iio_allocate_trigger("adis16201-dev%d", indio_dev->id); + st->trig = iio_trigger_alloc("adis16201-dev%d", indio_dev->id); if (st->trig == NULL) { ret = -ENOMEM; goto error_ret; @@ -56,7 +56,7 @@ int adis16201_probe_trigger(struct iio_dev *indio_dev) error_free_irq: free_irq(st->us->irq, st->trig); error_free_trig: - iio_free_trigger(st->trig); + iio_trigger_free(st->trig); error_ret: return ret; } @@ -67,5 +67,5 @@ void adis16201_remove_trigger(struct iio_dev *indio_dev) iio_trigger_unregister(state->trig); free_irq(state->us->irq, state->trig); - iio_free_trigger(state->trig); + iio_trigger_free(state->trig); } diff --git a/drivers/staging/iio/accel/adis16203_core.c b/drivers/staging/iio/accel/adis16203_core.c index 1a5140f9e3f..42d7eea06d1 100644 --- a/drivers/staging/iio/accel/adis16203_core.c +++ b/drivers/staging/iio/accel/adis16203_core.c @@ -15,9 +15,9 @@ #include <linux/sysfs.h> #include <linux/module.h> -#include "../iio.h" -#include "../sysfs.h" -#include "../buffer.h" +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/buffer.h> #include "adis16203.h" @@ -305,7 +305,7 @@ static int adis16203_read_raw(struct iio_dev *indio_dev, u8 addr; s16 val16; switch (mask) { - case 0: + case IIO_CHAN_INFO_RAW: mutex_lock(&indio_dev->mlock); addr = adis16203_addresses[chan->address][0]; ret = adis16203_spi_read_reg_16(indio_dev, addr, &val16); @@ -372,29 +372,75 @@ static int adis16203_read_raw(struct iio_dev *indio_dev, } static struct iio_chan_spec adis16203_channels[] = { - IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, "supply", 0, 0, - IIO_CHAN_INFO_SCALE_SEPARATE_BIT, - in_supply, ADIS16203_SCAN_SUPPLY, - IIO_ST('u', 12, 16, 0), 0), - IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, NULL, 1, 0, - IIO_CHAN_INFO_SCALE_SEPARATE_BIT, - in_aux, ADIS16203_SCAN_AUX_ADC, - IIO_ST('u', 12, 16, 0), 0), - IIO_CHAN(IIO_INCLI, 1, 0, 0, NULL, 0, IIO_MOD_X, - IIO_CHAN_INFO_SCALE_SHARED_BIT | - IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT, - incli_x, ADIS16203_SCAN_INCLI_X, - IIO_ST('s', 14, 16, 0), 0), - /* Fixme: Not what it appears to be - see data sheet */ - IIO_CHAN(IIO_INCLI, 1, 0, 0, NULL, 0, IIO_MOD_Y, - IIO_CHAN_INFO_SCALE_SHARED_BIT, - incli_y, ADIS16203_SCAN_INCLI_Y, - IIO_ST('s', 14, 16, 0), 0), - IIO_CHAN(IIO_TEMP, 0, 1, 0, NULL, 0, 0, - IIO_CHAN_INFO_SCALE_SEPARATE_BIT | - IIO_CHAN_INFO_OFFSET_SEPARATE_BIT, - temp, ADIS16203_SCAN_TEMP, - IIO_ST('u', 12, 16, 0), 0), + { + .type = IIO_VOLTAGE, + .indexed = 1, + .channel = 0, + .extend_name = "supply", + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_SCALE_SEPARATE_BIT, + .address = in_supply, + .scan_index = ADIS16203_SCAN_SUPPLY, + .scan_type = { + .sign = 'u', + .realbits = 12, + .storagebits = 16, + }, + }, { + .type = IIO_VOLTAGE, + .indexed = 1, + .channel = 1, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_SCALE_SEPARATE_BIT, + .address = in_aux, + .scan_index = ADIS16203_SCAN_AUX_ADC, + .scan_type = { + .sign = 'u', + .realbits = 12, + .storagebits = 16, + }, + }, { + .type = IIO_INCLI, + .modified = 1, + .channel2 = IIO_MOD_X, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_SCALE_SHARED_BIT | + IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT, + .address = incli_x, + .scan_index = ADIS16203_SCAN_INCLI_X, + .scan_type = { + .sign = 's', + .realbits = 14, + .storagebits = 16, + }, + }, { /* Fixme: Not what it appears to be - see data sheet */ + .type = IIO_INCLI, + .modified = 1, + .channel2 = IIO_MOD_Y, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_SCALE_SHARED_BIT, + .address = incli_y, + .scan_index = ADIS16203_SCAN_INCLI_Y, + .scan_type = { + .sign = 's', + .realbits = 14, + .storagebits = 16, + }, + }, { + .type = IIO_TEMP, + .indexed = 1, + .channel = 0, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_SCALE_SEPARATE_BIT | + IIO_CHAN_INFO_OFFSET_SEPARATE_BIT, + .address = temp, + .scan_index = ADIS16203_SCAN_TEMP, + .scan_type = { + .sign = 'u', + .realbits = 12, + .storagebits = 16, + }, + }, IIO_CHAN_SOFT_TIMESTAMP(5), }; @@ -423,7 +469,7 @@ static int __devinit adis16203_probe(struct spi_device *spi) struct adis16203_state *st; /* setup the industrialio driver allocated elements */ - indio_dev = iio_allocate_device(sizeof(*st)); + indio_dev = iio_device_alloc(sizeof(*st)); if (indio_dev == NULL) { ret = -ENOMEM; goto error_ret; @@ -477,7 +523,7 @@ error_uninitialize_ring: error_unreg_ring_funcs: adis16203_unconfigure_ring(indio_dev); error_free_dev: - iio_free_device(indio_dev); + iio_device_free(indio_dev); error_ret: return ret; } @@ -490,7 +536,7 @@ static int adis16203_remove(struct spi_device *spi) adis16203_remove_trigger(indio_dev); iio_buffer_unregister(indio_dev); adis16203_unconfigure_ring(indio_dev); - iio_free_device(indio_dev); + iio_device_free(indio_dev); return 0; } diff --git a/drivers/staging/iio/accel/adis16203_ring.c b/drivers/staging/iio/accel/adis16203_ring.c index 6a8963db4f6..2171f7483e7 100644 --- a/drivers/staging/iio/accel/adis16203_ring.c +++ b/drivers/staging/iio/accel/adis16203_ring.c @@ -5,9 +5,9 @@ #include <linux/spi/spi.h> #include <linux/slab.h> -#include "../iio.h" +#include <linux/iio/iio.h> #include "../ring_sw.h" -#include "../trigger_consumer.h" +#include <linux/iio/trigger_consumer.h> #include "adis16203.h" /** @@ -66,9 +66,8 @@ static irqreturn_t adis16203_trigger_handler(int irq, void *p) int i = 0; s16 *data; - size_t datasize = ring->access->get_bytes_per_datum(ring); - data = kmalloc(datasize, GFP_KERNEL); + data = kmalloc(indio_dev->scan_bytes, GFP_KERNEL); if (data == NULL) { dev_err(&st->us->dev, "memory alloc failed in ring bh"); return -ENOMEM; @@ -81,7 +80,7 @@ static irqreturn_t adis16203_trigger_handler(int irq, void *p) data[i] = be16_to_cpup((__be16 *)&(st->rx[i*2])); /* Guaranteed to be aligned with 8 byte boundary */ - if (ring->scan_timestamp) + if (indio_dev->scan_timestamp) *((s64 *)(data + ((i + 3)/4)*4)) = pf->timestamp; ring->access->store_to(ring, diff --git a/drivers/staging/iio/accel/adis16203_trigger.c b/drivers/staging/iio/accel/adis16203_trigger.c index 24bcb8e15c5..b8a04073d6d 100644 --- a/drivers/staging/iio/accel/adis16203_trigger.c +++ b/drivers/staging/iio/accel/adis16203_trigger.c @@ -3,8 +3,8 @@ #include <linux/spi/spi.h> #include <linux/export.h> -#include "../iio.h" -#include "../trigger.h" +#include <linux/iio/iio.h> +#include <linux/iio/trigger.h> #include "adis16203.h" /** @@ -29,7 +29,7 @@ int adis16203_probe_trigger(struct iio_dev *indio_dev) int ret; struct adis16203_state *st = iio_priv(indio_dev); - st->trig = iio_allocate_trigger("adis16203-dev%d", indio_dev->id); + st->trig = iio_trigger_alloc("adis16203-dev%d", indio_dev->id); if (st->trig == NULL) { ret = -ENOMEM; goto error_ret; @@ -58,7 +58,7 @@ int adis16203_probe_trigger(struct iio_dev *indio_dev) error_free_irq: free_irq(st->us->irq, st->trig); error_free_trig: - iio_free_trigger(st->trig); + iio_trigger_free(st->trig); error_ret: return ret; } @@ -69,5 +69,5 @@ void adis16203_remove_trigger(struct iio_dev *indio_dev) iio_trigger_unregister(st->trig); free_irq(st->us->irq, st->trig); - iio_free_trigger(st->trig); + iio_trigger_free(st->trig); } diff --git a/drivers/staging/iio/accel/adis16204_core.c b/drivers/staging/iio/accel/adis16204_core.c index fa89364b841..eacda583313 100644 --- a/drivers/staging/iio/accel/adis16204_core.c +++ b/drivers/staging/iio/accel/adis16204_core.c @@ -18,9 +18,9 @@ #include <linux/list.h> #include <linux/module.h> -#include "../iio.h" -#include "../sysfs.h" -#include "../buffer.h" +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/buffer.h> #include "adis16204.h" @@ -342,7 +342,7 @@ static int adis16204_read_raw(struct iio_dev *indio_dev, int addrind; switch (mask) { - case 0: + case IIO_CHAN_INFO_RAW: mutex_lock(&indio_dev->mlock); addr = adis16204_addresses[chan->address][0]; ret = adis16204_spi_read_reg_16(indio_dev, addr, &val16); @@ -444,31 +444,78 @@ static int adis16204_write_raw(struct iio_dev *indio_dev, } static struct iio_chan_spec adis16204_channels[] = { - IIO_CHAN(IIO_VOLTAGE, 0, 0, 0, "supply", 0, 0, - IIO_CHAN_INFO_SCALE_SEPARATE_BIT, - in_supply, ADIS16204_SCAN_SUPPLY, - IIO_ST('u', 12, 16, 0), 0), - IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, NULL, 1, 0, - IIO_CHAN_INFO_SCALE_SEPARATE_BIT, - in_aux, ADIS16204_SCAN_AUX_ADC, - IIO_ST('u', 12, 16, 0), 0), - IIO_CHAN(IIO_TEMP, 0, 1, 0, NULL, 0, 0, - IIO_CHAN_INFO_SCALE_SEPARATE_BIT | - IIO_CHAN_INFO_OFFSET_SEPARATE_BIT, - temp, ADIS16204_SCAN_TEMP, - IIO_ST('u', 12, 16, 0), 0), - IIO_CHAN(IIO_ACCEL, 1, 0, 0, NULL, 0, IIO_MOD_X, - IIO_CHAN_INFO_SCALE_SEPARATE_BIT | - IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT | - IIO_CHAN_INFO_PEAK_SEPARATE_BIT, - accel_x, ADIS16204_SCAN_ACC_X, - IIO_ST('s', 14, 16, 0), 0), - IIO_CHAN(IIO_ACCEL, 1, 0, 0, NULL, 0, IIO_MOD_Y, - IIO_CHAN_INFO_SCALE_SEPARATE_BIT | - IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT | - IIO_CHAN_INFO_PEAK_SEPARATE_BIT, - accel_y, ADIS16204_SCAN_ACC_Y, - IIO_ST('s', 14, 16, 0), 0), + { + .type = IIO_VOLTAGE, + .indexed = 1, /* Note was not previously indexed */ + .channel = 0, + .extend_name = "supply", + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_SCALE_SEPARATE_BIT, + .address = in_supply, + .scan_index = ADIS16204_SCAN_SUPPLY, + .scan_type = { + .sign = 'u', + .realbits = 12, + .storagebits = 16, + }, + }, { + .type = IIO_VOLTAGE, + .indexed = 1, + .channel = 1, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_SCALE_SEPARATE_BIT, + .address = in_aux, + .scan_index = ADIS16204_SCAN_AUX_ADC, + .scan_type = { + .sign = 'u', + .realbits = 12, + .storagebits = 16, + }, + }, { + .type = IIO_TEMP, + .indexed = 1, + .channel = 0, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_SCALE_SEPARATE_BIT | + IIO_CHAN_INFO_OFFSET_SEPARATE_BIT, + .address = temp, + .scan_index = ADIS16204_SCAN_TEMP, + .scan_type = { + .sign = 'u', + .realbits = 12, + .storagebits = 16, + }, + }, { + .type = IIO_ACCEL, + .modified = 1, + .channel2 = IIO_MOD_X, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_SCALE_SEPARATE_BIT | + IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT | + IIO_CHAN_INFO_PEAK_SEPARATE_BIT, + .address = accel_x, + .scan_index = ADIS16204_SCAN_ACC_X, + .scan_type = { + .sign = 's', + .realbits = 14, + .storagebits = 16, + }, + }, { + .type = IIO_ACCEL, + .modified = 1, + .channel2 = IIO_MOD_Y, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_SCALE_SEPARATE_BIT | + IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT | + IIO_CHAN_INFO_PEAK_SEPARATE_BIT, + .address = accel_y, + .scan_index = ADIS16204_SCAN_ACC_Y, + .scan_type = { + .sign = 's', + .realbits = 14, + .storagebits = 16, + }, + }, IIO_CHAN_SOFT_TIMESTAMP(5), }; @@ -498,7 +545,7 @@ static int __devinit adis16204_probe(struct spi_device *spi) struct iio_dev *indio_dev; /* setup the industrialio driver allocated elements */ - indio_dev = iio_allocate_device(sizeof(*st)); + indio_dev = iio_device_alloc(sizeof(*st)); if (indio_dev == NULL) { ret = -ENOMEM; goto error_ret; @@ -551,7 +598,7 @@ error_uninitialize_ring: error_unreg_ring_funcs: adis16204_unconfigure_ring(indio_dev); error_free_dev: - iio_free_device(indio_dev); + iio_device_free(indio_dev); error_ret: return ret; } @@ -564,7 +611,7 @@ static int adis16204_remove(struct spi_device *spi) adis16204_remove_trigger(indio_dev); iio_buffer_unregister(indio_dev); adis16204_unconfigure_ring(indio_dev); - iio_free_device(indio_dev); + iio_device_free(indio_dev); return 0; } diff --git a/drivers/staging/iio/accel/adis16204_ring.c b/drivers/staging/iio/accel/adis16204_ring.c index 5c8ab733886..0a8b1255fd1 100644 --- a/drivers/staging/iio/accel/adis16204_ring.c +++ b/drivers/staging/iio/accel/adis16204_ring.c @@ -5,9 +5,9 @@ #include <linux/spi/spi.h> #include <linux/slab.h> -#include "../iio.h" +#include <linux/iio/iio.h> #include "../ring_sw.h" -#include "../trigger_consumer.h" +#include <linux/iio/trigger_consumer.h> #include "adis16204.h" /** @@ -63,9 +63,8 @@ static irqreturn_t adis16204_trigger_handler(int irq, void *p) struct iio_buffer *ring = indio_dev->buffer; int i = 0; s16 *data; - size_t datasize = ring->access->get_bytes_per_datum(ring); - data = kmalloc(datasize, GFP_KERNEL); + data = kmalloc(indio_dev->scan_bytes, GFP_KERNEL); if (data == NULL) { dev_err(&st->us->dev, "memory alloc failed in ring bh"); return -ENOMEM; @@ -78,7 +77,7 @@ static irqreturn_t adis16204_trigger_handler(int irq, void *p) data[i] = be16_to_cpup((__be16 *)&(st->rx[i*2])); /* Guaranteed to be aligned with 8 byte boundary */ - if (ring->scan_timestamp) + if (indio_dev->scan_timestamp) *((s64 *)(data + ((i + 3)/4)*4)) = pf->timestamp; ring->access->store_to(ring, (u8 *)data, pf->timestamp); diff --git a/drivers/staging/iio/accel/adis16204_trigger.c b/drivers/staging/iio/accel/adis16204_trigger.c index 6e542af02c0..408a1682368 100644 --- a/drivers/staging/iio/accel/adis16204_trigger.c +++ b/drivers/staging/iio/accel/adis16204_trigger.c @@ -3,8 +3,8 @@ #include <linux/spi/spi.h> #include <linux/export.h> -#include "../iio.h" -#include "../trigger.h" +#include <linux/iio/iio.h> +#include <linux/iio/trigger.h> #include "adis16204.h" /** @@ -29,7 +29,7 @@ int adis16204_probe_trigger(struct iio_dev *indio_dev) int ret; struct adis16204_state *st = iio_priv(indio_dev); - st->trig = iio_allocate_trigger("adis16204-dev%d", indio_dev->id); + st->trig = iio_trigger_alloc("adis16204-dev%d", indio_dev->id); if (st->trig == NULL) { ret = -ENOMEM; goto error_ret; @@ -58,7 +58,7 @@ int adis16204_probe_trigger(struct iio_dev *indio_dev) error_free_irq: free_irq(st->us->irq, st->trig); error_free_trig: - iio_free_trigger(st->trig); + iio_trigger_free(st->trig); error_ret: return ret; } @@ -69,5 +69,5 @@ void adis16204_remove_trigger(struct iio_dev *indio_dev) iio_trigger_unregister(state->trig); free_irq(state->us->irq, state->trig); - iio_free_trigger(state->trig); + iio_trigger_free(state->trig); } diff --git a/drivers/staging/iio/accel/adis16209_core.c b/drivers/staging/iio/accel/adis16209_core.c index a98715f6bd6..8e8dbe6b707 100644 --- a/drivers/staging/iio/accel/adis16209_core.c +++ b/drivers/staging/iio/accel/adis16209_core.c @@ -16,9 +16,9 @@ #include <linux/list.h> #include <linux/module.h> -#include "../iio.h" -#include "../sysfs.h" -#include "../buffer.h" +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/buffer.h> #include "adis16209.h" @@ -331,7 +331,7 @@ static int adis16209_read_raw(struct iio_dev *indio_dev, s16 val16; switch (mask) { - case 0: + case IIO_CHAN_INFO_RAW: mutex_lock(&indio_dev->mlock); addr = adis16209_addresses[chan->address][0]; ret = adis16209_spi_read_reg_16(indio_dev, addr, &val16); @@ -408,41 +408,114 @@ static int adis16209_read_raw(struct iio_dev *indio_dev, } static struct iio_chan_spec adis16209_channels[] = { - IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, NULL, 0, 0, - IIO_CHAN_INFO_SCALE_SEPARATE_BIT, - in_supply, ADIS16209_SCAN_SUPPLY, - IIO_ST('u', 14, 16, 0), 0), - IIO_CHAN(IIO_TEMP, 0, 1, 0, NULL, 0, 0, - IIO_CHAN_INFO_SCALE_SEPARATE_BIT | - IIO_CHAN_INFO_OFFSET_SEPARATE_BIT, - temp, ADIS16209_SCAN_TEMP, - IIO_ST('u', 12, 16, 0), 0), - IIO_CHAN(IIO_ACCEL, 1, 0, 0, NULL, 0, IIO_MOD_X, - IIO_CHAN_INFO_SCALE_SHARED_BIT | - IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT, - accel_x, ADIS16209_SCAN_ACC_X, - IIO_ST('s', 14, 16, 0), 0), - IIO_CHAN(IIO_ACCEL, 1, 0, 0, NULL, 0, IIO_MOD_Y, - IIO_CHAN_INFO_SCALE_SHARED_BIT | - IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT, - accel_y, ADIS16209_SCAN_ACC_Y, - IIO_ST('s', 14, 16, 0), 0), - IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, NULL, 1, 0, - IIO_CHAN_INFO_SCALE_SEPARATE_BIT, - in_aux, ADIS16209_SCAN_AUX_ADC, - IIO_ST('u', 12, 16, 0), 0), - IIO_CHAN(IIO_INCLI, 1, 0, 0, NULL, 0, IIO_MOD_X, - IIO_CHAN_INFO_SCALE_SHARED_BIT, - incli_x, ADIS16209_SCAN_INCLI_X, - IIO_ST('s', 14, 16, 0), 0), - IIO_CHAN(IIO_INCLI, 1, 0, 0, NULL, 0, IIO_MOD_Y, - IIO_CHAN_INFO_SCALE_SHARED_BIT, - incli_y, ADIS16209_SCAN_INCLI_Y, - IIO_ST('s', 14, 16, 0), 0), - IIO_CHAN(IIO_ROT, 0, 1, 0, NULL, 0, IIO_MOD_X, - 0, - rot, ADIS16209_SCAN_ROT, - IIO_ST('s', 14, 16, 0), 0), + { + .type = IIO_VOLTAGE, + .indexed = 1, + .channel = 0, + .extend_name = "supply", + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_SCALE_SEPARATE_BIT, + .address = in_supply, + .scan_index = ADIS16209_SCAN_SUPPLY, + .scan_type = { + .sign = 'u', + .realbits = 14, + .storagebits = 16, + }, + }, { + .type = IIO_TEMP, + .indexed = 0, + .channel = 0, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_SCALE_SEPARATE_BIT | + IIO_CHAN_INFO_OFFSET_SEPARATE_BIT, + .address = temp, + .scan_index = ADIS16209_SCAN_TEMP, + .scan_type = { + .sign = 'u', + .realbits = 12, + .storagebits = 16, + }, + }, { + .type = IIO_ACCEL, + .modified = 1, + .channel2 = IIO_MOD_X, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_SCALE_SHARED_BIT | + IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT, + .address = accel_x, + .scan_index = ADIS16209_SCAN_ACC_X, + .scan_type = { + .sign = 's', + .realbits = 14, + .storagebits = 16, + }, + }, { + .type = IIO_ACCEL, + .modified = 1, + .channel2 = IIO_MOD_Y, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_SCALE_SHARED_BIT | + IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT, + .address = accel_y, + .scan_index = ADIS16209_SCAN_ACC_Y, + .scan_type = { + .sign = 's', + .realbits = 14, + .storagebits = 16, + }, + }, { + .type = IIO_VOLTAGE, + .indexed = 1, + .channel = 1, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_SCALE_SEPARATE_BIT, + .address = in_aux, + .scan_index = ADIS16209_SCAN_AUX_ADC, + .scan_type = { + .sign = 'u', + .realbits = 12, + .storagebits = 16, + }, + }, { + .type = IIO_INCLI, + .modified = 1, + .channel2 = IIO_MOD_X, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_SCALE_SHARED_BIT, + .address = incli_x, + .scan_index = ADIS16209_SCAN_INCLI_X, + .scan_type = { + .sign = 's', + .realbits = 14, + .storagebits = 16, + }, + }, { + .type = IIO_INCLI, + .modified = 1, + .channel2 = IIO_MOD_Y, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_SCALE_SHARED_BIT, + .address = incli_y, + .scan_index = ADIS16209_SCAN_INCLI_Y, + .scan_type = { + .sign = 's', + .realbits = 14, + .storagebits = 16, + }, + }, { + .type = IIO_ROT, + .modified = 1, + .channel2 = IIO_MOD_X, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, + .address = rot, + .scan_index = ADIS16209_SCAN_ROT, + .scan_type = { + .sign = 's', + .realbits = 14, + .storagebits = 16, + }, + }, IIO_CHAN_SOFT_TIMESTAMP(8) }; @@ -471,7 +544,7 @@ static int __devinit adis16209_probe(struct spi_device *spi) struct iio_dev *indio_dev; /* setup the industrialio driver allocated elements */ - indio_dev = iio_allocate_device(sizeof(*st)); + indio_dev = iio_device_alloc(sizeof(*st)); if (indio_dev == NULL) { ret = -ENOMEM; goto error_ret; @@ -524,7 +597,7 @@ error_uninitialize_ring: error_unreg_ring_funcs: adis16209_unconfigure_ring(indio_dev); error_free_dev: - iio_free_device(indio_dev); + iio_device_free(indio_dev); error_ret: return ret; } @@ -539,7 +612,7 @@ static int adis16209_remove(struct spi_device *spi) adis16209_remove_trigger(indio_dev); iio_buffer_unregister(indio_dev); adis16209_unconfigure_ring(indio_dev); - iio_free_device(indio_dev); + iio_device_free(indio_dev); return 0; } diff --git a/drivers/staging/iio/accel/adis16209_ring.c b/drivers/staging/iio/accel/adis16209_ring.c index 57254b6b38b..f7ed989dd20 100644 --- a/drivers/staging/iio/accel/adis16209_ring.c +++ b/drivers/staging/iio/accel/adis16209_ring.c @@ -5,9 +5,9 @@ #include <linux/spi/spi.h> #include <linux/slab.h> -#include "../iio.h" +#include <linux/iio/iio.h> #include "../ring_sw.h" -#include "../trigger_consumer.h" +#include <linux/iio/trigger_consumer.h> #include "adis16209.h" /** @@ -61,12 +61,10 @@ static irqreturn_t adis16209_trigger_handler(int irq, void *p) struct iio_dev *indio_dev = pf->indio_dev; struct adis16209_state *st = iio_priv(indio_dev); struct iio_buffer *ring = indio_dev->buffer; - int i = 0; s16 *data; - size_t datasize = ring->access->get_bytes_per_datum(ring); - data = kmalloc(datasize , GFP_KERNEL); + data = kmalloc(indio_dev->scan_bytes, GFP_KERNEL); if (data == NULL) { dev_err(&st->us->dev, "memory alloc failed in ring bh"); return -ENOMEM; @@ -79,7 +77,7 @@ static irqreturn_t adis16209_trigger_handler(int irq, void *p) data[i] = be16_to_cpup((__be16 *)&(st->rx[i*2])); /* Guaranteed to be aligned with 8 byte boundary */ - if (ring->scan_timestamp) + if (indio_dev->scan_timestamp) *((s64 *)(data + ((i + 3)/4)*4)) = pf->timestamp; ring->access->store_to(ring, (u8 *)data, pf->timestamp); diff --git a/drivers/staging/iio/accel/adis16209_trigger.c b/drivers/staging/iio/accel/adis16209_trigger.c index c5d82c1a55d..2ad93dcaf40 100644 --- a/drivers/staging/iio/accel/adis16209_trigger.c +++ b/drivers/staging/iio/accel/adis16209_trigger.c @@ -3,8 +3,8 @@ #include <linux/spi/spi.h> #include <linux/export.h> -#include "../iio.h" -#include "../trigger.h" +#include <linux/iio/iio.h> +#include <linux/iio/trigger.h> #include "adis16209.h" /** @@ -38,7 +38,7 @@ int adis16209_probe_trigger(struct iio_dev *indio_dev) int ret; struct adis16209_state *st = iio_priv(indio_dev); - st->trig = iio_allocate_trigger("adis16209-dev%d", indio_dev->id); + st->trig = iio_trigger_alloc("adis16209-dev%d", indio_dev->id); if (st->trig == NULL) { ret = -ENOMEM; goto error_ret; @@ -66,7 +66,7 @@ int adis16209_probe_trigger(struct iio_dev *indio_dev) error_free_irq: free_irq(st->us->irq, st->trig); error_free_trig: - iio_free_trigger(st->trig); + iio_trigger_free(st->trig); error_ret: return ret; } @@ -77,5 +77,5 @@ void adis16209_remove_trigger(struct iio_dev *indio_dev) iio_trigger_unregister(st->trig); free_irq(st->us->irq, st->trig); - iio_free_trigger(st->trig); + iio_trigger_free(st->trig); } diff --git a/drivers/staging/iio/accel/adis16220_core.c b/drivers/staging/iio/accel/adis16220_core.c index 51a852d4548..e8c513db2d2 100644 --- a/drivers/staging/iio/accel/adis16220_core.c +++ b/drivers/staging/iio/accel/adis16220_core.c @@ -15,8 +15,8 @@ #include <linux/sysfs.h> #include <linux/module.h> -#include "../iio.h" -#include "../sysfs.h" +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> #include "adis16220.h" @@ -507,7 +507,7 @@ static int adis16220_read_raw(struct iio_dev *indio_dev, u8 bits; switch (mask) { - case 0: + case IIO_CHAN_INFO_RAW: addrind = 0; break; case IIO_CHAN_INFO_OFFSET: @@ -575,11 +575,13 @@ static const struct iio_chan_spec adis16220_channels[] = { .indexed = 1, .channel = 0, .extend_name = "supply", - .info_mask = IIO_CHAN_INFO_SCALE_SEPARATE_BIT, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_SCALE_SEPARATE_BIT, .address = in_supply, }, { .type = IIO_ACCEL, - .info_mask = IIO_CHAN_INFO_OFFSET_SEPARATE_BIT | + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_OFFSET_SEPARATE_BIT | IIO_CHAN_INFO_SCALE_SEPARATE_BIT | IIO_CHAN_INFO_PEAK_SEPARATE_BIT, .address = accel, @@ -587,20 +589,23 @@ static const struct iio_chan_spec adis16220_channels[] = { .type = IIO_TEMP, .indexed = 1, .channel = 0, - .info_mask = IIO_CHAN_INFO_OFFSET_SEPARATE_BIT | + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_OFFSET_SEPARATE_BIT | IIO_CHAN_INFO_SCALE_SEPARATE_BIT, .address = temp, }, { .type = IIO_VOLTAGE, .indexed = 1, .channel = 1, - .info_mask = IIO_CHAN_INFO_OFFSET_SEPARATE_BIT | + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_OFFSET_SEPARATE_BIT | IIO_CHAN_INFO_SCALE_SEPARATE_BIT, .address = in_1, }, { .type = IIO_VOLTAGE, .indexed = 1, .channel = 2, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, .address = in_2, } }; @@ -629,7 +634,7 @@ static int __devinit adis16220_probe(struct spi_device *spi) struct iio_dev *indio_dev; /* setup the industrialio driver allocated elements */ - indio_dev = iio_allocate_device(sizeof(*st)); + indio_dev = iio_device_alloc(sizeof(*st)); if (indio_dev == NULL) { ret = -ENOMEM; goto error_ret; @@ -680,7 +685,7 @@ error_rm_accel_bin: error_unregister_dev: iio_device_unregister(indio_dev); error_free_dev: - iio_free_device(indio_dev); + iio_device_free(indio_dev); error_ret: return ret; } @@ -695,7 +700,7 @@ static int adis16220_remove(struct spi_device *spi) sysfs_remove_bin_file(&indio_dev->dev.kobj, &adc1_bin); sysfs_remove_bin_file(&indio_dev->dev.kobj, &accel_bin); iio_device_unregister(indio_dev); - iio_free_device(indio_dev); + iio_device_free(indio_dev); return 0; } diff --git a/drivers/staging/iio/accel/adis16240_core.c b/drivers/staging/iio/accel/adis16240_core.c index 17f77fef7f2..f043bbdce36 100644 --- a/drivers/staging/iio/accel/adis16240_core.c +++ b/drivers/staging/iio/accel/adis16240_core.c @@ -19,9 +19,9 @@ #include <linux/list.h> #include <linux/module.h> -#include "../iio.h" -#include "../sysfs.h" -#include "../buffer.h" +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/buffer.h> #include "adis16240.h" @@ -365,7 +365,7 @@ static int adis16240_read_raw(struct iio_dev *indio_dev, s16 val16; switch (mask) { - case 0: + case IIO_CHAN_INFO_RAW: mutex_lock(&indio_dev->mlock); addr = adis16240_addresses[chan->address][0]; ret = adis16240_spi_read_reg_16(indio_dev, addr, &val16); @@ -468,33 +468,88 @@ static int adis16240_write_raw(struct iio_dev *indio_dev, } static struct iio_chan_spec adis16240_channels[] = { - IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, "supply", 0, 0, - IIO_CHAN_INFO_SCALE_SEPARATE_BIT, - in_supply, ADIS16240_SCAN_SUPPLY, - IIO_ST('u', 10, 16, 0), 0), - IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, NULL, 1, 0, - 0, - in_aux, ADIS16240_SCAN_AUX_ADC, - IIO_ST('u', 10, 16, 0), 0), - IIO_CHAN(IIO_ACCEL, 1, 0, 0, NULL, 0, IIO_MOD_X, - IIO_CHAN_INFO_SCALE_SHARED_BIT | - IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT, - accel_x, ADIS16240_SCAN_ACC_X, - IIO_ST('s', 10, 16, 0), 0), - IIO_CHAN(IIO_ACCEL, 1, 0, 0, NULL, 0, IIO_MOD_Y, - IIO_CHAN_INFO_SCALE_SHARED_BIT | - IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT, - accel_y, ADIS16240_SCAN_ACC_Y, - IIO_ST('s', 10, 16, 0), 0), - IIO_CHAN(IIO_ACCEL, 1, 0, 0, NULL, 0, IIO_MOD_Z, - IIO_CHAN_INFO_SCALE_SHARED_BIT | - IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT, - accel_z, ADIS16240_SCAN_ACC_Z, - IIO_ST('s', 10, 16, 0), 0), - IIO_CHAN(IIO_TEMP, 0, 1, 0, NULL, 0, 0, - IIO_CHAN_INFO_SCALE_SEPARATE_BIT, - temp, ADIS16240_SCAN_TEMP, - IIO_ST('u', 10, 16, 0), 0), + { + .type = IIO_VOLTAGE, + .indexed = 1, + .channel = 0, + .extend_name = "supply", + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_SCALE_SEPARATE_BIT, + .address = in_supply, + .scan_index = ADIS16240_SCAN_SUPPLY, + .scan_type = { + .sign = 'u', + .realbits = 10, + .storagebits = 16, + }, + }, { + .type = IIO_VOLTAGE, + .indexed = 1, + .channel = 1, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, + .address = in_aux, + .scan_index = ADIS16240_SCAN_AUX_ADC, + .scan_type = { + .sign = 'u', + .realbits = 10, + .storagebits = 16, + }, + }, { + .type = IIO_ACCEL, + .modified = 1, + .channel2 = IIO_MOD_X, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_SCALE_SHARED_BIT | + IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT, + .address = accel_x, + .scan_index = ADIS16240_SCAN_ACC_X, + .scan_type = { + .sign = 's', + .realbits = 10, + .storagebits = 16, + }, + }, { + .type = IIO_ACCEL, + .modified = 1, + .channel2 = IIO_MOD_Y, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_SCALE_SHARED_BIT | + IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT, + .address = accel_y, + .scan_index = ADIS16240_SCAN_ACC_Y, + .scan_type = { + .sign = 's', + .realbits = 10, + .storagebits = 16, + }, + }, { + .type = IIO_ACCEL, + .modified = 1, + .channel2 = IIO_MOD_Z, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_SCALE_SHARED_BIT | + IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT, + .address = accel_z, + .scan_index = ADIS16240_SCAN_ACC_Z, + .scan_type = { + .sign = 's', + .realbits = 10, + .storagebits = 16, + }, + }, { + .type = IIO_TEMP, + .indexed = 1, + .channel = 0, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_SCALE_SEPARATE_BIT, + .address = temp, + .scan_index = ADIS16240_SCAN_TEMP, + .scan_type = { + .sign = 'u', + .realbits = 10, + .storagebits = 16, + }, + }, IIO_CHAN_SOFT_TIMESTAMP(6) }; @@ -523,7 +578,7 @@ static int __devinit adis16240_probe(struct spi_device *spi) struct iio_dev *indio_dev; /* setup the industrialio driver allocated elements */ - indio_dev = iio_allocate_device(sizeof(*st)); + indio_dev = iio_device_alloc(sizeof(*st)); if (indio_dev == NULL) { ret = -ENOMEM; goto error_ret; @@ -576,7 +631,7 @@ error_uninitialize_ring: error_unreg_ring_funcs: adis16240_unconfigure_ring(indio_dev); error_free_dev: - iio_free_device(indio_dev); + iio_device_free(indio_dev); error_ret: return ret; } @@ -592,7 +647,7 @@ static int adis16240_remove(struct spi_device *spi) adis16240_remove_trigger(indio_dev); iio_buffer_unregister(indio_dev); adis16240_unconfigure_ring(indio_dev); - iio_free_device(indio_dev); + iio_device_free(indio_dev); return 0; } diff --git a/drivers/staging/iio/accel/adis16240_ring.c b/drivers/staging/iio/accel/adis16240_ring.c index 43ba84e993a..1aa95662e54 100644 --- a/drivers/staging/iio/accel/adis16240_ring.c +++ b/drivers/staging/iio/accel/adis16240_ring.c @@ -5,9 +5,9 @@ #include <linux/spi/spi.h> #include <linux/slab.h> -#include "../iio.h" +#include <linux/iio/iio.h> #include "../ring_sw.h" -#include "../trigger_consumer.h" +#include <linux/iio/trigger_consumer.h> #include "adis16240.h" /** @@ -61,9 +61,8 @@ static irqreturn_t adis16240_trigger_handler(int irq, void *p) int i = 0; s16 *data; - size_t datasize = ring->access->get_bytes_per_datum(ring); - data = kmalloc(datasize, GFP_KERNEL); + data = kmalloc(indio_dev->scan_bytes, GFP_KERNEL); if (data == NULL) { dev_err(&st->us->dev, "memory alloc failed in ring bh"); return -ENOMEM; @@ -76,7 +75,7 @@ static irqreturn_t adis16240_trigger_handler(int irq, void *p) data[i] = be16_to_cpup((__be16 *)&(st->rx[i*2])); /* Guaranteed to be aligned with 8 byte boundary */ - if (ring->scan_timestamp) + if (indio_dev->scan_timestamp) *((s64 *)(data + ((i + 3)/4)*4)) = pf->timestamp; ring->access->store_to(ring, (u8 *)data, pf->timestamp); diff --git a/drivers/staging/iio/accel/adis16240_trigger.c b/drivers/staging/iio/accel/adis16240_trigger.c index 8e0ce568e64..fa90a22b143 100644 --- a/drivers/staging/iio/accel/adis16240_trigger.c +++ b/drivers/staging/iio/accel/adis16240_trigger.c @@ -3,8 +3,8 @@ #include <linux/spi/spi.h> #include <linux/export.h> -#include "../iio.h" -#include "../trigger.h" +#include <linux/iio/iio.h> +#include <linux/iio/trigger.h> #include "adis16240.h" /** @@ -38,7 +38,7 @@ int adis16240_probe_trigger(struct iio_dev *indio_dev) int ret; struct adis16240_state *st = iio_priv(indio_dev); - st->trig = iio_allocate_trigger("adis16240-dev%d", indio_dev->id); + st->trig = iio_trigger_alloc("adis16240-dev%d", indio_dev->id); if (st->trig == NULL) { ret = -ENOMEM; goto error_ret; @@ -67,7 +67,7 @@ int adis16240_probe_trigger(struct iio_dev *indio_dev) error_free_irq: free_irq(st->us->irq, st->trig); error_free_trig: - iio_free_trigger(st->trig); + iio_trigger_free(st->trig); error_ret: return ret; } @@ -78,5 +78,5 @@ void adis16240_remove_trigger(struct iio_dev *indio_dev) iio_trigger_unregister(st->trig); free_irq(st->us->irq, st->trig); - iio_free_trigger(st->trig); + iio_trigger_free(st->trig); } diff --git a/drivers/staging/iio/accel/kxsd9.c b/drivers/staging/iio/accel/kxsd9.c index d13d7215ff6..8cf7cd943c9 100644 --- a/drivers/staging/iio/accel/kxsd9.c +++ b/drivers/staging/iio/accel/kxsd9.c @@ -23,8 +23,8 @@ #include <linux/slab.h> #include <linux/module.h> -#include "../iio.h" -#include "../sysfs.h" +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> #define KXSD9_REG_X 0x00 #define KXSD9_REG_Y 0x02 @@ -158,7 +158,7 @@ static int kxsd9_read_raw(struct iio_dev *indio_dev, struct kxsd9_state *st = iio_priv(indio_dev); switch (mask) { - case 0: + case IIO_CHAN_INFO_RAW: ret = kxsd9_read(indio_dev, chan->address); if (ret < 0) goto error_ret; @@ -181,7 +181,8 @@ error_ret: .type = IIO_ACCEL, \ .modified = 1, \ .channel2 = IIO_MOD_##axis, \ - .info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT, \ + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \ + IIO_CHAN_INFO_SCALE_SHARED_BIT, \ .address = KXSD9_REG_##axis, \ } @@ -189,6 +190,7 @@ static struct iio_chan_spec kxsd9_channels[] = { KXSD9_ACCEL_CHAN(X), KXSD9_ACCEL_CHAN(Y), KXSD9_ACCEL_CHAN(Z), { .type = IIO_VOLTAGE, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, .indexed = 1, .address = KXSD9_REG_AUX, } @@ -226,7 +228,7 @@ static int __devinit kxsd9_probe(struct spi_device *spi) struct kxsd9_state *st; int ret = 0; - indio_dev = iio_allocate_device(sizeof(*st)); + indio_dev = iio_device_alloc(sizeof(*st)); if (indio_dev == NULL) { ret = -ENOMEM; goto error_ret; @@ -254,7 +256,7 @@ static int __devinit kxsd9_probe(struct spi_device *spi) return 0; error_free_dev: - iio_free_device(indio_dev); + iio_device_free(indio_dev); error_ret: return ret; } @@ -262,7 +264,7 @@ error_ret: static int __devexit kxsd9_remove(struct spi_device *spi) { iio_device_unregister(spi_get_drvdata(spi)); - iio_free_device(spi_get_drvdata(spi)); + iio_device_free(spi_get_drvdata(spi)); return 0; } diff --git a/drivers/staging/iio/accel/lis3l02dq_core.c b/drivers/staging/iio/accel/lis3l02dq_core.c index 376da513796..a7780439af1 100644 --- a/drivers/staging/iio/accel/lis3l02dq_core.c +++ b/drivers/staging/iio/accel/lis3l02dq_core.c @@ -23,10 +23,10 @@ #include <linux/sysfs.h> #include <linux/module.h> -#include "../iio.h" -#include "../sysfs.h" -#include "../events.h" -#include "../buffer.h" +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/events.h> +#include <linux/iio/buffer.h> #include "lis3l02dq.h" @@ -257,7 +257,7 @@ static int lis3l02dq_read_raw(struct iio_dev *indio_dev, u8 reg; switch (mask) { - case 0: + case IIO_CHAN_INFO_RAW: /* Take the iio_dev status lock */ mutex_lock(&indio_dev->mlock); if (indio_dev->currentmode == INDIO_BUFFER_TRIGGERED) { @@ -513,7 +513,8 @@ static irqreturn_t lis3l02dq_event_handler(int irq, void *private) } #define LIS3L02DQ_INFO_MASK \ - (IIO_CHAN_INFO_SCALE_SHARED_BIT | \ + (IIO_CHAN_INFO_RAW_SEPARATE_BIT | \ + IIO_CHAN_INFO_SCALE_SHARED_BIT | \ IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT | \ IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT) @@ -521,13 +522,26 @@ static irqreturn_t lis3l02dq_event_handler(int irq, void *private) (IIO_EV_BIT(IIO_EV_TYPE_THRESH, IIO_EV_DIR_RISING) | \ IIO_EV_BIT(IIO_EV_TYPE_THRESH, IIO_EV_DIR_FALLING)) +#define LIS3L02DQ_CHAN(index, mod) \ + { \ + .type = IIO_ACCEL, \ + .modified = 1, \ + .channel2 = mod, \ + .info_mask = LIS3L02DQ_INFO_MASK, \ + .address = index, \ + .scan_index = index, \ + .scan_type = { \ + .sign = 's', \ + .realbits = 12, \ + .storagebits = 16, \ + }, \ + .event_mask = LIS3L02DQ_EVENT_MASK, \ + } + static struct iio_chan_spec lis3l02dq_channels[] = { - IIO_CHAN(IIO_ACCEL, 1, 0, 0, NULL, 0, IIO_MOD_X, LIS3L02DQ_INFO_MASK, - 0, 0, IIO_ST('s', 12, 16, 0), LIS3L02DQ_EVENT_MASK), - IIO_CHAN(IIO_ACCEL, 1, 0, 0, NULL, 0, IIO_MOD_Y, LIS3L02DQ_INFO_MASK, - 1, 1, IIO_ST('s', 12, 16, 0), LIS3L02DQ_EVENT_MASK), - IIO_CHAN(IIO_ACCEL, 1, 0, 0, NULL, 0, IIO_MOD_Z, LIS3L02DQ_INFO_MASK, - 2, 2, IIO_ST('s', 12, 16, 0), LIS3L02DQ_EVENT_MASK), + LIS3L02DQ_CHAN(0, IIO_MOD_X), + LIS3L02DQ_CHAN(1, IIO_MOD_Y), + LIS3L02DQ_CHAN(2, IIO_MOD_Z), IIO_CHAN_SOFT_TIMESTAMP(3) }; @@ -666,7 +680,7 @@ static int __devinit lis3l02dq_probe(struct spi_device *spi) struct lis3l02dq_state *st; struct iio_dev *indio_dev; - indio_dev = iio_allocate_device(sizeof *st); + indio_dev = iio_device_alloc(sizeof *st); if (indio_dev == NULL) { ret = -ENOMEM; goto error_ret; @@ -724,7 +738,7 @@ static int __devinit lis3l02dq_probe(struct spi_device *spi) return 0; error_remove_trigger: - if (indio_dev->modes & INDIO_BUFFER_TRIGGERED) + if (spi->irq && gpio_is_valid(irq_to_gpio(spi->irq))) lis3l02dq_remove_trigger(indio_dev); error_free_interrupt: if (spi->irq && gpio_is_valid(irq_to_gpio(spi->irq)) > 0) @@ -734,7 +748,7 @@ error_uninitialize_buffer: error_unreg_buffer_funcs: lis3l02dq_unconfigure_buffer(indio_dev); error_free_dev: - iio_free_device(indio_dev); + iio_device_free(indio_dev); error_ret: return ret; } @@ -789,7 +803,7 @@ static int lis3l02dq_remove(struct spi_device *spi) iio_buffer_unregister(indio_dev); lis3l02dq_unconfigure_buffer(indio_dev); - iio_free_device(indio_dev); + iio_device_free(indio_dev); err_ret: return ret; } diff --git a/drivers/staging/iio/accel/lis3l02dq_ring.c b/drivers/staging/iio/accel/lis3l02dq_ring.c index 0fc3973f32a..9306f934e33 100644 --- a/drivers/staging/iio/accel/lis3l02dq_ring.c +++ b/drivers/staging/iio/accel/lis3l02dq_ring.c @@ -6,11 +6,11 @@ #include <linux/slab.h> #include <linux/export.h> -#include "../iio.h" +#include <linux/iio/iio.h> #include "../ring_sw.h" -#include "../kfifo_buf.h" -#include "../trigger.h" -#include "../trigger_consumer.h" +#include <linux/iio/kfifo_buf.h> +#include <linux/iio/trigger.h> +#include <linux/iio/trigger_consumer.h> #include "lis3l02dq.h" /** @@ -137,9 +137,9 @@ static irqreturn_t lis3l02dq_trigger_handler(int irq, void *p) struct iio_dev *indio_dev = pf->indio_dev; struct iio_buffer *buffer = indio_dev->buffer; int len = 0; - size_t datasize = buffer->access->get_bytes_per_datum(buffer); - char *data = kmalloc(datasize, GFP_KERNEL); + char *data; + data = kmalloc(indio_dev->scan_bytes, GFP_KERNEL); if (data == NULL) { dev_err(indio_dev->dev.parent, "memory alloc failed in buffer bh"); @@ -150,7 +150,7 @@ static irqreturn_t lis3l02dq_trigger_handler(int irq, void *p) len = lis3l02dq_get_buffer_element(indio_dev, data); /* Guaranteed to be aligned with 8 byte boundary */ - if (buffer->scan_timestamp) + if (indio_dev->scan_timestamp) *(s64 *)(((phys_addr_t)data + len + sizeof(s64) - 1) & ~(sizeof(s64) - 1)) = pf->timestamp; @@ -286,7 +286,7 @@ int lis3l02dq_probe_trigger(struct iio_dev *indio_dev) int ret; struct lis3l02dq_state *st = iio_priv(indio_dev); - st->trig = iio_allocate_trigger("lis3l02dq-dev%d", indio_dev->id); + st->trig = iio_trigger_alloc("lis3l02dq-dev%d", indio_dev->id); if (!st->trig) { ret = -ENOMEM; goto error_ret; @@ -302,7 +302,7 @@ int lis3l02dq_probe_trigger(struct iio_dev *indio_dev) return 0; error_free_trig: - iio_free_trigger(st->trig); + iio_trigger_free(st->trig); error_ret: return ret; } @@ -312,7 +312,7 @@ void lis3l02dq_remove_trigger(struct iio_dev *indio_dev) struct lis3l02dq_state *st = iio_priv(indio_dev); iio_trigger_unregister(st->trig); - iio_free_trigger(st->trig); + iio_trigger_free(st->trig); } void lis3l02dq_unconfigure_buffer(struct iio_dev *indio_dev) diff --git a/drivers/staging/iio/accel/sca3000_core.c b/drivers/staging/iio/accel/sca3000_core.c index 49764fb7181..3c5aea5efb2 100644 --- a/drivers/staging/iio/accel/sca3000_core.c +++ b/drivers/staging/iio/accel/sca3000_core.c @@ -18,10 +18,10 @@ #include <linux/spi/spi.h> #include <linux/sysfs.h> #include <linux/module.h> -#include "../iio.h" -#include "../sysfs.h" -#include "../events.h" -#include "../buffer.h" +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/events.h> +#include <linux/iio/buffer.h> #include "sca3000.h" @@ -429,17 +429,31 @@ static IIO_DEVICE_ATTR(measurement_mode, S_IRUGO | S_IWUSR, static IIO_DEVICE_ATTR(revision, S_IRUGO, sca3000_show_rev, NULL, 0); #define SCA3000_INFO_MASK \ - IIO_CHAN_INFO_SCALE_SHARED_BIT + IIO_CHAN_INFO_RAW_SEPARATE_BIT | IIO_CHAN_INFO_SCALE_SHARED_BIT #define SCA3000_EVENT_MASK \ (IIO_EV_BIT(IIO_EV_TYPE_MAG, IIO_EV_DIR_RISING)) +#define SCA3000_CHAN(index, mod) \ + { \ + .type = IIO_ACCEL, \ + .modified = 1, \ + .channel2 = mod, \ + .info_mask = SCA3000_INFO_MASK, \ + .address = index, \ + .scan_index = index, \ + .scan_type = { \ + .sign = 's', \ + .realbits = 11, \ + .storagebits = 16, \ + .shift = 5, \ + }, \ + .event_mask = SCA3000_EVENT_MASK, \ + } + static struct iio_chan_spec sca3000_channels[] = { - IIO_CHAN(IIO_ACCEL, 1, 0, 0, NULL, 0, IIO_MOD_X, SCA3000_INFO_MASK, - 0, 0, IIO_ST('s', 11, 16, 5), SCA3000_EVENT_MASK), - IIO_CHAN(IIO_ACCEL, 1, 0, 0, NULL, 0, IIO_MOD_Y, SCA3000_INFO_MASK, - 1, 1, IIO_ST('s', 11, 16, 5), SCA3000_EVENT_MASK), - IIO_CHAN(IIO_ACCEL, 1, 0, 0, NULL, 0, IIO_MOD_Z, SCA3000_INFO_MASK, - 2, 2, IIO_ST('s', 11, 16, 5), SCA3000_EVENT_MASK), + SCA3000_CHAN(0, IIO_MOD_X), + SCA3000_CHAN(1, IIO_MOD_Y), + SCA3000_CHAN(2, IIO_MOD_Z), }; static u8 sca3000_addresses[3][3] = { @@ -462,7 +476,7 @@ static int sca3000_read_raw(struct iio_dev *indio_dev, u8 address; switch (mask) { - case 0: + case IIO_CHAN_INFO_RAW: mutex_lock(&st->lock); if (st->mo_det_use_count) { mutex_unlock(&st->lock); @@ -1131,7 +1145,7 @@ static int __devinit sca3000_probe(struct spi_device *spi) struct sca3000_state *st; struct iio_dev *indio_dev; - indio_dev = iio_allocate_device(sizeof(*st)); + indio_dev = iio_device_alloc(sizeof(*st)); if (indio_dev == NULL) { ret = -ENOMEM; goto error_ret; @@ -1195,7 +1209,7 @@ error_unregister_ring: error_unregister_dev: iio_device_unregister(indio_dev); error_free_dev: - iio_free_device(indio_dev); + iio_device_free(indio_dev); error_ret: return ret; @@ -1233,7 +1247,7 @@ static int sca3000_remove(struct spi_device *spi) iio_device_unregister(indio_dev); iio_buffer_unregister(indio_dev); sca3000_unconfigure_ring(indio_dev); - iio_free_device(indio_dev); + iio_device_free(indio_dev); return 0; } diff --git a/drivers/staging/iio/accel/sca3000_ring.c b/drivers/staging/iio/accel/sca3000_ring.c index 6b824a11f7f..889bc86047f 100644 --- a/drivers/staging/iio/accel/sca3000_ring.c +++ b/drivers/staging/iio/accel/sca3000_ring.c @@ -18,9 +18,9 @@ #include <linux/sched.h> #include <linux/poll.h> -#include "../iio.h" -#include "../sysfs.h" -#include "../buffer.h" +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/buffer.h> #include "../ring_hw.h" #include "sca3000.h" diff --git a/drivers/staging/iio/adc/Kconfig b/drivers/staging/iio/adc/Kconfig index 592eabd85f3..2490dd25093 100644 --- a/drivers/staging/iio/adc/Kconfig +++ b/drivers/staging/iio/adc/Kconfig @@ -25,7 +25,7 @@ config AD7606 depends on GPIOLIB select IIO_BUFFER select IIO_TRIGGER - select IIO_SW_RING + select IIO_KFIFO_BUF help Say yes here to build support for Analog Devices: ad7606, ad7606-6, ad7606-4 analog to digital converters (ADC). @@ -63,7 +63,7 @@ config AD799X_RING_BUFFER bool "Analog Devices AD799x: use ring buffer" depends on AD799X select IIO_BUFFER - select IIO_SW_RING + select IIO_KFIFO_BUF help Say yes here to include ring buffer support in the AD799X ADC driver. @@ -72,7 +72,7 @@ config AD7476 tristate "Analog Devices AD7475/6/7/8 AD7466/7/8 and AD7495 ADC driver" depends on SPI select IIO_BUFFER - select IIO_SW_RING + select IIO_KFIFO_BUF select IIO_TRIGGER help Say yes here to build support for Analog Devices @@ -87,7 +87,7 @@ config AD7887 tristate "Analog Devices AD7887 ADC driver" depends on SPI select IIO_BUFFER - select IIO_SW_RING + select IIO_KFIFO_BUF select IIO_TRIGGER help Say yes here to build support for Analog Devices @@ -113,7 +113,7 @@ config AD7793 tristate "Analog Devices AD7792 AD7793 ADC driver" depends on SPI select IIO_BUFFER - select IIO_SW_RING + select IIO_KFIFO_BUF select IIO_TRIGGER help Say yes here to build support for Analog Devices @@ -135,7 +135,7 @@ config AD7192 tristate "Analog Devices AD7190 AD7192 AD7195 ADC driver" depends on SPI select IIO_BUFFER - select IIO_SW_RING + select IIO_KFIFO_BUF select IIO_TRIGGER help Say yes here to build support for Analog Devices AD7190, @@ -195,11 +195,20 @@ config MAX1363_RING_BUFFER config LPC32XX_ADC tristate "NXP LPC32XX ADC" - depends on ARCH_LPC32XX && !TOUCHSCREEN_LPC32XX + depends on ARCH_LPC32XX help Say yes here to build support for the integrated ADC inside the LPC32XX SoC. Note that this feature uses the same hardware as the - touchscreen driver, so you can only select one of the two drivers - (lpc32xx_adc or lpc32xx_ts). Provides direct access via sysfs. + touchscreen driver, so you should either select only one of the two + drivers (lpc32xx_adc or lpc32xx_ts) or, in the OpenFirmware case, + activate only one via device tree selection. Provides direct access + via sysfs. + +config SPEAR_ADC + tristate "ST SPEAr ADC" + depends on PLAT_SPEAR + help + Say yes here to build support for the integrated ADC inside the + ST SPEAr SoC. Provides direct access via sysfs. endmenu diff --git a/drivers/staging/iio/adc/Makefile b/drivers/staging/iio/adc/Makefile index f83ab9551d8..14e98b62b70 100644 --- a/drivers/staging/iio/adc/Makefile +++ b/drivers/staging/iio/adc/Makefile @@ -38,3 +38,4 @@ obj-$(CONFIG_ADT7310) += adt7310.o obj-$(CONFIG_ADT7410) += adt7410.o obj-$(CONFIG_AD7280) += ad7280a.o obj-$(CONFIG_LPC32XX_ADC) += lpc32xx_adc.o +obj-$(CONFIG_SPEAR_ADC) += spear_adc.o diff --git a/drivers/staging/iio/adc/ad7192.c b/drivers/staging/iio/adc/ad7192.c index 9fd6d63d299..d5655e3b8ef 100644 --- a/drivers/staging/iio/adc/ad7192.c +++ b/drivers/staging/iio/adc/ad7192.c @@ -1,7 +1,7 @@ /* * AD7190 AD7192 AD7195 SPI ADC driver * - * Copyright 2011 Analog Devices Inc. + * Copyright 2011-2012 Analog Devices Inc. * * Licensed under the GPL-2. */ @@ -17,12 +17,12 @@ #include <linux/sched.h> #include <linux/delay.h> -#include "../iio.h" -#include "../sysfs.h" -#include "../buffer.h" -#include "../ring_sw.h" -#include "../trigger.h" -#include "../trigger_consumer.h" +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/buffer.h> +#include <linux/iio/kfifo_buf.h> +#include <linux/iio/trigger.h> +#include <linux/iio/trigger_consumer.h> #include "ad7192.h" @@ -456,31 +456,19 @@ out: static int ad7192_ring_preenable(struct iio_dev *indio_dev) { struct ad7192_state *st = iio_priv(indio_dev); - struct iio_buffer *ring = indio_dev->buffer; - size_t d_size; unsigned channel; + int ret; if (bitmap_empty(indio_dev->active_scan_mask, indio_dev->masklength)) return -EINVAL; + ret = iio_sw_buffer_preenable(indio_dev); + if (ret < 0) + return ret; + channel = find_first_bit(indio_dev->active_scan_mask, indio_dev->masklength); - d_size = bitmap_weight(indio_dev->active_scan_mask, - indio_dev->masklength) * - indio_dev->channels[0].scan_type.storagebits / 8; - - if (ring->scan_timestamp) { - d_size += sizeof(s64); - - if (d_size % sizeof(s64)) - d_size += sizeof(s64) - (d_size % sizeof(s64)); - } - - if (indio_dev->buffer->access->set_bytes_per_datum) - indio_dev->buffer->access-> - set_bytes_per_datum(indio_dev->buffer, d_size); - st->mode = (st->mode & ~AD7192_MODE_SEL(-1)) | AD7192_MODE_SEL(AD7192_MODE_CONT); st->conf = (st->conf & ~AD7192_CONF_CHAN(-1)) | @@ -533,7 +521,7 @@ static irqreturn_t ad7192_trigger_handler(int irq, void *p) indio_dev->channels[0].scan_type.realbits/8); /* Guaranteed to be aligned with 8 byte boundary */ - if (ring->scan_timestamp) + if (indio_dev->scan_timestamp) dat64[1] = pf->timestamp; ring->access->store_to(ring, (u8 *)dat64, pf->timestamp); @@ -556,7 +544,7 @@ static int ad7192_register_ring_funcs_and_init(struct iio_dev *indio_dev) { int ret; - indio_dev->buffer = iio_sw_rb_allocate(indio_dev); + indio_dev->buffer = iio_kfifo_allocate(indio_dev); if (!indio_dev->buffer) { ret = -ENOMEM; goto error_ret; @@ -569,7 +557,7 @@ static int ad7192_register_ring_funcs_and_init(struct iio_dev *indio_dev) indio_dev->id); if (indio_dev->pollfunc == NULL) { ret = -ENOMEM; - goto error_deallocate_sw_rb; + goto error_deallocate_kfifo; } /* Ring buffer functions - here trigger setup related */ @@ -579,8 +567,8 @@ static int ad7192_register_ring_funcs_and_init(struct iio_dev *indio_dev) indio_dev->modes |= INDIO_BUFFER_TRIGGERED; return 0; -error_deallocate_sw_rb: - iio_sw_rb_free(indio_dev->buffer); +error_deallocate_kfifo: + iio_kfifo_free(indio_dev->buffer); error_ret: return ret; } @@ -588,7 +576,7 @@ error_ret: static void ad7192_ring_cleanup(struct iio_dev *indio_dev) { iio_dealloc_pollfunc(indio_dev->pollfunc); - iio_sw_rb_free(indio_dev->buffer); + iio_kfifo_free(indio_dev->buffer); } /** @@ -616,7 +604,7 @@ static int ad7192_probe_trigger(struct iio_dev *indio_dev) struct ad7192_state *st = iio_priv(indio_dev); int ret; - st->trig = iio_allocate_trigger("%s-dev%d", + st->trig = iio_trigger_alloc("%s-dev%d", spi_get_device_id(st->spi)->name, indio_dev->id); if (st->trig == NULL) { @@ -649,7 +637,7 @@ static int ad7192_probe_trigger(struct iio_dev *indio_dev) error_free_irq: free_irq(st->spi->irq, indio_dev); error_free_trig: - iio_free_trigger(st->trig); + iio_trigger_free(st->trig); error_ret: return ret; } @@ -660,7 +648,7 @@ static void ad7192_remove_trigger(struct iio_dev *indio_dev) iio_trigger_unregister(st->trig); free_irq(st->spi->irq, indio_dev); - iio_free_trigger(st->trig); + iio_trigger_free(st->trig); } static ssize_t ad7192_read_frequency(struct device *dev, @@ -849,7 +837,7 @@ static int ad7192_read_raw(struct iio_dev *indio_dev, bool unipolar = !!(st->conf & AD7192_CONF_UNIPOLAR); switch (m) { - case 0: + case IIO_CHAN_INFO_RAW: mutex_lock(&indio_dev->mlock); if (iio_buffer_enabled(indio_dev)) ret = -EBUSY; @@ -981,7 +969,8 @@ static const struct iio_info ad7195_info = { .extend_name = _name, \ .channel = _chan, \ .channel2 = _chan2, \ - .info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT, \ + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \ + IIO_CHAN_INFO_SCALE_SHARED_BIT, \ .address = _address, \ .scan_index = _si, \ .scan_type = IIO_ST('s', 24, 32, 0)} @@ -990,7 +979,8 @@ static const struct iio_info ad7195_info = { { .type = IIO_VOLTAGE, \ .indexed = 1, \ .channel = _chan, \ - .info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT, \ + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \ + IIO_CHAN_INFO_SCALE_SHARED_BIT, \ .address = _address, \ .scan_index = _si, \ .scan_type = IIO_ST('s', 24, 32, 0)} @@ -999,7 +989,8 @@ static const struct iio_info ad7195_info = { { .type = IIO_TEMP, \ .indexed = 1, \ .channel = _chan, \ - .info_mask = IIO_CHAN_INFO_SCALE_SEPARATE_BIT, \ + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \ + IIO_CHAN_INFO_SCALE_SEPARATE_BIT, \ .address = _address, \ .scan_index = _si, \ .scan_type = IIO_ST('s', 24, 32, 0)} @@ -1033,7 +1024,7 @@ static int __devinit ad7192_probe(struct spi_device *spi) return -ENODEV; } - indio_dev = iio_allocate_device(sizeof(*st)); + indio_dev = iio_device_alloc(sizeof(*st)); if (indio_dev == NULL) return -ENOMEM; @@ -1114,7 +1105,7 @@ error_put_reg: if (!IS_ERR(st->reg)) regulator_put(st->reg); - iio_free_device(indio_dev); + iio_device_free(indio_dev); return ret; } diff --git a/drivers/staging/iio/adc/ad7280a.c b/drivers/staging/iio/adc/ad7280a.c index 7dbd6812c24..9c3b66f3739 100644 --- a/drivers/staging/iio/adc/ad7280a.c +++ b/drivers/staging/iio/adc/ad7280a.c @@ -16,9 +16,9 @@ #include <linux/interrupt.h> #include <linux/module.h> -#include "../iio.h" -#include "../sysfs.h" -#include "../events.h" +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/events.h> #include "ad7280a.h" @@ -508,6 +508,7 @@ static int ad7280_channel_init(struct ad7280_state *st) } st->channels[cnt].indexed = 1; st->channels[cnt].info_mask = + IIO_CHAN_INFO_RAW_SEPARATE_BIT | IIO_CHAN_INFO_SCALE_SHARED_BIT; st->channels[cnt].address = AD7280A_DEVADDR(dev) << 8 | ch; @@ -524,7 +525,9 @@ static int ad7280_channel_init(struct ad7280_state *st) st->channels[cnt].channel2 = dev * 6; st->channels[cnt].address = AD7280A_ALL_CELLS; st->channels[cnt].indexed = 1; - st->channels[cnt].info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT; + st->channels[cnt].info_mask = + IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_SCALE_SHARED_BIT; st->channels[cnt].scan_index = cnt; st->channels[cnt].scan_type.sign = 'u'; st->channels[cnt].scan_type.realbits = 32; @@ -788,7 +791,7 @@ static int ad7280_read_raw(struct iio_dev *indio_dev, int ret; switch (m) { - case 0: + case IIO_CHAN_INFO_RAW: mutex_lock(&indio_dev->mlock); if (chan->address == AD7280A_ALL_CELLS) ret = ad7280_read_all_channels(st, st->scan_cnt, NULL); @@ -836,7 +839,7 @@ static int __devinit ad7280_probe(struct spi_device *spi) int ret; const unsigned short tACQ_ns[4] = {465, 1010, 1460, 1890}; const unsigned short nAVG[4] = {1, 2, 4, 8}; - struct iio_dev *indio_dev = iio_allocate_device(sizeof(*st)); + struct iio_dev *indio_dev = iio_device_alloc(sizeof(*st)); if (indio_dev == NULL) return -ENOMEM; @@ -942,7 +945,7 @@ error_free_channels: kfree(st->channels); error_free_device: - iio_free_device(indio_dev); + iio_device_free(indio_dev); return ret; } @@ -961,7 +964,7 @@ static int __devexit ad7280_remove(struct spi_device *spi) kfree(st->channels); kfree(st->iio_attr); - iio_free_device(indio_dev); + iio_device_free(indio_dev); return 0; } diff --git a/drivers/staging/iio/adc/ad7291.c b/drivers/staging/iio/adc/ad7291.c index 81d6b6128cb..a987c2011ec 100644 --- a/drivers/staging/iio/adc/ad7291.c +++ b/drivers/staging/iio/adc/ad7291.c @@ -17,9 +17,9 @@ #include <linux/regulator/consumer.h> #include <linux/err.h> -#include "../iio.h" -#include "../sysfs.h" -#include "../events.h" +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/events.h> /* * Simplified handling @@ -461,7 +461,7 @@ static int ad7291_read_raw(struct iio_dev *indio_dev, s16 signval; switch (mask) { - case 0: + case IIO_CHAN_INFO_RAW: switch (chan->type) { case IIO_VOLTAGE: mutex_lock(&chip->state_lock); @@ -536,7 +536,8 @@ static int ad7291_read_raw(struct iio_dev *indio_dev, #define AD7291_VOLTAGE_CHAN(_chan) \ { \ .type = IIO_VOLTAGE, \ - .info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT, \ + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \ + IIO_CHAN_INFO_SCALE_SHARED_BIT, \ .indexed = 1, \ .channel = _chan, \ .event_mask = IIO_EV_BIT(IIO_EV_TYPE_THRESH, IIO_EV_DIR_RISING)|\ @@ -554,7 +555,8 @@ static const struct iio_chan_spec ad7291_channels[] = { AD7291_VOLTAGE_CHAN(7), { .type = IIO_TEMP, - .info_mask = IIO_CHAN_INFO_AVERAGE_RAW_SEPARATE_BIT | + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_AVERAGE_RAW_SEPARATE_BIT | IIO_CHAN_INFO_SCALE_SEPARATE_BIT, .indexed = 1, .channel = 0, @@ -585,7 +587,7 @@ static int __devinit ad7291_probe(struct i2c_client *client, struct iio_dev *indio_dev; int ret = 0, voltage_uv = 0; - indio_dev = iio_allocate_device(sizeof(*chip)); + indio_dev = iio_device_alloc(sizeof(*chip)); if (indio_dev == NULL) { ret = -ENOMEM; goto error_ret; @@ -667,7 +669,7 @@ error_put_reg: if (!IS_ERR(chip->reg)) regulator_put(chip->reg); - iio_free_device(indio_dev); + iio_device_free(indio_dev); error_ret: return ret; } @@ -687,7 +689,7 @@ static int __devexit ad7291_remove(struct i2c_client *client) regulator_put(chip->reg); } - iio_free_device(indio_dev); + iio_device_free(indio_dev); return 0; } diff --git a/drivers/staging/iio/adc/ad7298.h b/drivers/staging/iio/adc/ad7298.h index a0e5dea415e..5051a7e4d4f 100644 --- a/drivers/staging/iio/adc/ad7298.h +++ b/drivers/staging/iio/adc/ad7298.h @@ -38,7 +38,6 @@ struct ad7298_platform_data { struct ad7298_state { struct spi_device *spi; struct regulator *reg; - size_t d_size; u16 int_vref_mv; unsigned ext_ref; struct spi_transfer ring_xfer[10]; diff --git a/drivers/staging/iio/adc/ad7298_core.c b/drivers/staging/iio/adc/ad7298_core.c index 8dd6aa9cf92..c90f2b3e661 100644 --- a/drivers/staging/iio/adc/ad7298_core.c +++ b/drivers/staging/iio/adc/ad7298_core.c @@ -16,40 +16,51 @@ #include <linux/delay.h> #include <linux/module.h> -#include "../iio.h" -#include "../sysfs.h" -#include "../buffer.h" +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/buffer.h> #include "ad7298.h" +#define AD7298_V_CHAN(index) \ + { \ + .type = IIO_VOLTAGE, \ + .indexed = 1, \ + .channel = index, \ + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \ + IIO_CHAN_INFO_SCALE_SHARED_BIT, \ + .address = index, \ + .scan_index = index, \ + .scan_type = { \ + .sign = 'u', \ + .realbits = 12, \ + .storagebits = 16, \ + }, \ + } + static struct iio_chan_spec ad7298_channels[] = { - IIO_CHAN(IIO_TEMP, 0, 1, 0, NULL, 0, 0, - IIO_CHAN_INFO_SCALE_SEPARATE_BIT, - 9, AD7298_CH_TEMP, IIO_ST('s', 32, 32, 0), 0), - IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, NULL, 0, 0, - IIO_CHAN_INFO_SCALE_SHARED_BIT, - 0, 0, IIO_ST('u', 12, 16, 0), 0), - IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, NULL, 1, 0, - IIO_CHAN_INFO_SCALE_SHARED_BIT, - 1, 1, IIO_ST('u', 12, 16, 0), 0), - IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, NULL, 2, 0, - IIO_CHAN_INFO_SCALE_SHARED_BIT, - 2, 2, IIO_ST('u', 12, 16, 0), 0), - IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, NULL, 3, 0, - IIO_CHAN_INFO_SCALE_SHARED_BIT, - 3, 3, IIO_ST('u', 12, 16, 0), 0), - IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, NULL, 4, 0, - IIO_CHAN_INFO_SCALE_SHARED_BIT, - 4, 4, IIO_ST('u', 12, 16, 0), 0), - IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, NULL, 5, 0, - IIO_CHAN_INFO_SCALE_SHARED_BIT, - 5, 5, IIO_ST('u', 12, 16, 0), 0), - IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, NULL, 6, 0, - IIO_CHAN_INFO_SCALE_SHARED_BIT, - 6, 6, IIO_ST('u', 12, 16, 0), 0), - IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, NULL, 7, 0, - IIO_CHAN_INFO_SCALE_SHARED_BIT, - 7, 7, IIO_ST('u', 12, 16, 0), 0), + { + .type = IIO_TEMP, + .indexed = 1, + .channel = 0, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_SCALE_SEPARATE_BIT, + .address = 9, + .scan_index = AD7298_CH_TEMP, + .scan_type = { + .sign = 's', + .realbits = 32, + .storagebits = 32, + }, + }, + AD7298_V_CHAN(0), + AD7298_V_CHAN(1), + AD7298_V_CHAN(2), + AD7298_V_CHAN(3), + AD7298_V_CHAN(4), + AD7298_V_CHAN(5), + AD7298_V_CHAN(6), + AD7298_V_CHAN(7), IIO_CHAN_SOFT_TIMESTAMP(8), }; @@ -121,7 +132,7 @@ static int ad7298_read_raw(struct iio_dev *indio_dev, unsigned int scale_uv; switch (m) { - case 0: + case IIO_CHAN_INFO_RAW: mutex_lock(&indio_dev->mlock); if (indio_dev->currentmode == INDIO_BUFFER_TRIGGERED) { ret = -EBUSY; @@ -168,7 +179,7 @@ static int __devinit ad7298_probe(struct spi_device *spi) struct ad7298_platform_data *pdata = spi->dev.platform_data; struct ad7298_state *st; int ret; - struct iio_dev *indio_dev = iio_allocate_device(sizeof(*st)); + struct iio_dev *indio_dev = iio_device_alloc(sizeof(*st)); if (indio_dev == NULL) return -ENOMEM; @@ -241,7 +252,7 @@ error_disable_reg: error_put_reg: if (!IS_ERR(st->reg)) regulator_put(st->reg); - iio_free_device(indio_dev); + iio_device_free(indio_dev); return ret; } @@ -258,7 +269,7 @@ static int __devexit ad7298_remove(struct spi_device *spi) regulator_disable(st->reg); regulator_put(st->reg); } - iio_free_device(indio_dev); + iio_device_free(indio_dev); return 0; } diff --git a/drivers/staging/iio/adc/ad7298_ring.c b/drivers/staging/iio/adc/ad7298_ring.c index feeb0eeba59..908a3e5609d 100644 --- a/drivers/staging/iio/adc/ad7298_ring.c +++ b/drivers/staging/iio/adc/ad7298_ring.c @@ -1,7 +1,7 @@ /* * AD7298 SPI ADC driver * - * Copyright 2011 Analog Devices Inc. + * Copyright 2011-2012 Analog Devices Inc. * * Licensed under the GPL-2. */ @@ -11,10 +11,10 @@ #include <linux/slab.h> #include <linux/spi/spi.h> -#include "../iio.h" -#include "../buffer.h" -#include "../ring_sw.h" -#include "../trigger_consumer.h" +#include <linux/iio/iio.h> +#include <linux/iio/buffer.h> +#include <linux/iio/kfifo_buf.h> +#include <linux/iio/trigger_consumer.h> #include "ad7298.h" @@ -28,25 +28,17 @@ static int ad7298_ring_preenable(struct iio_dev *indio_dev) { struct ad7298_state *st = iio_priv(indio_dev); - struct iio_buffer *ring = indio_dev->buffer; - size_t d_size; int i, m; unsigned short command; - int scan_count = bitmap_weight(indio_dev->active_scan_mask, - indio_dev->masklength); - d_size = scan_count * (AD7298_STORAGE_BITS / 8); - - if (ring->scan_timestamp) { - d_size += sizeof(s64); - - if (d_size % sizeof(s64)) - d_size += sizeof(s64) - (d_size % sizeof(s64)); - } + int scan_count, ret; - if (ring->access->set_bytes_per_datum) - ring->access->set_bytes_per_datum(ring, d_size); + ret = iio_sw_buffer_preenable(indio_dev); + if (ret < 0) + return ret; - st->d_size = d_size; + /* Now compute overall size */ + scan_count = bitmap_weight(indio_dev->active_scan_mask, + indio_dev->masklength); command = AD7298_WRITE | st->ext_ref; @@ -100,9 +92,9 @@ static irqreturn_t ad7298_trigger_handler(int irq, void *p) if (b_sent) return b_sent; - if (ring->scan_timestamp) { + if (indio_dev->scan_timestamp) { time_ns = iio_get_time_ns(); - memcpy((u8 *)buf + st->d_size - sizeof(s64), + memcpy((u8 *)buf + indio_dev->scan_bytes - sizeof(s64), &time_ns, sizeof(time_ns)); } @@ -126,7 +118,7 @@ int ad7298_register_ring_funcs_and_init(struct iio_dev *indio_dev) { int ret; - indio_dev->buffer = iio_sw_rb_allocate(indio_dev); + indio_dev->buffer = iio_kfifo_allocate(indio_dev); if (!indio_dev->buffer) { ret = -ENOMEM; goto error_ret; @@ -140,7 +132,7 @@ int ad7298_register_ring_funcs_and_init(struct iio_dev *indio_dev) if (indio_dev->pollfunc == NULL) { ret = -ENOMEM; - goto error_deallocate_sw_rb; + goto error_deallocate_kfifo; } /* Ring buffer functions - here trigger setup related */ @@ -151,8 +143,8 @@ int ad7298_register_ring_funcs_and_init(struct iio_dev *indio_dev) indio_dev->modes |= INDIO_BUFFER_TRIGGERED; return 0; -error_deallocate_sw_rb: - iio_sw_rb_free(indio_dev->buffer); +error_deallocate_kfifo: + iio_kfifo_free(indio_dev->buffer); error_ret: return ret; } @@ -160,5 +152,5 @@ error_ret: void ad7298_ring_cleanup(struct iio_dev *indio_dev) { iio_dealloc_pollfunc(indio_dev->pollfunc); - iio_sw_rb_free(indio_dev->buffer); + iio_kfifo_free(indio_dev->buffer); } diff --git a/drivers/staging/iio/adc/ad7476.h b/drivers/staging/iio/adc/ad7476.h index 27f696c75cc..b1dd9317fe1 100644 --- a/drivers/staging/iio/adc/ad7476.h +++ b/drivers/staging/iio/adc/ad7476.h @@ -27,7 +27,6 @@ struct ad7476_state { struct spi_device *spi; const struct ad7476_chip_info *chip_info; struct regulator *reg; - size_t d_size; u16 int_vref_mv; struct spi_transfer xfer; struct spi_message msg; diff --git a/drivers/staging/iio/adc/ad7476_core.c b/drivers/staging/iio/adc/ad7476_core.c index 0c064d1c392..be1c260cf16 100644 --- a/drivers/staging/iio/adc/ad7476_core.c +++ b/drivers/staging/iio/adc/ad7476_core.c @@ -15,9 +15,9 @@ #include <linux/err.h> #include <linux/module.h> -#include "../iio.h" -#include "../sysfs.h" -#include "../buffer.h" +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/buffer.h> #include "ad7476.h" @@ -43,7 +43,7 @@ static int ad7476_read_raw(struct iio_dev *indio_dev, unsigned int scale_uv; switch (m) { - case 0: + case IIO_CHAN_INFO_RAW: mutex_lock(&indio_dev->mlock); if (iio_buffer_enabled(indio_dev)) ret = -EBUSY; @@ -66,53 +66,51 @@ static int ad7476_read_raw(struct iio_dev *indio_dev, return -EINVAL; } +#define AD7476_CHAN(bits) \ + { \ + .type = IIO_VOLTAGE, \ + .indexed = 1, \ + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \ + IIO_CHAN_INFO_SCALE_SHARED_BIT, \ + .scan_type = { \ + .sign = 'u', \ + .realbits = bits, \ + .storagebits = 16, \ + .shift = 12 - bits, \ + }, \ +} + static const struct ad7476_chip_info ad7476_chip_info_tbl[] = { [ID_AD7466] = { - .channel[0] = IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, NULL, 0, 0, - IIO_CHAN_INFO_SCALE_SHARED_BIT, - 0, 0, IIO_ST('u', 12, 16, 0), 0), + .channel[0] = AD7476_CHAN(12), .channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1), }, [ID_AD7467] = { - .channel[0] = IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, NULL, 0, 0, - IIO_CHAN_INFO_SCALE_SHARED_BIT, - 0, 0, IIO_ST('u', 10, 16, 2), 0), + .channel[0] = AD7476_CHAN(10), .channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1), }, [ID_AD7468] = { - .channel[0] = IIO_CHAN(IIO_VOLTAGE, 0, 1 , 0, NULL, 0, 0, - IIO_CHAN_INFO_SCALE_SHARED_BIT, - 0, 0, IIO_ST('u', 8, 16, 4), 0), + .channel[0] = AD7476_CHAN(8), .channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1), }, [ID_AD7475] = { - .channel[0] = IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, NULL, 0, 0, - IIO_CHAN_INFO_SCALE_SHARED_BIT, - 0, 0, IIO_ST('u', 12, 16, 0), 0), + .channel[0] = AD7476_CHAN(12), .channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1), }, [ID_AD7476] = { - .channel[0] = IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, NULL, 0, 0, - IIO_CHAN_INFO_SCALE_SHARED_BIT, - 0, 0, IIO_ST('u', 12, 16, 0), 0), + .channel[0] = AD7476_CHAN(12), .channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1), }, [ID_AD7477] = { - .channel[0] = IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, NULL, 0, 0, - IIO_CHAN_INFO_SCALE_SHARED_BIT, - 0, 0, IIO_ST('u', 10, 16, 2), 0), + .channel[0] = AD7476_CHAN(10), .channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1), }, [ID_AD7478] = { - .channel[0] = IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, NULL, 0, 0, - IIO_CHAN_INFO_SCALE_SHARED_BIT, - 0, 0, IIO_ST('u', 8, 16, 4), 0), + .channel[0] = AD7476_CHAN(8), .channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1), }, [ID_AD7495] = { - .channel[0] = IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, NULL, 0, 0, - IIO_CHAN_INFO_SCALE_SHARED_BIT, - 0, 0, IIO_ST('u', 12, 16, 0), 0), + .channel[0] = AD7476_CHAN(12), .channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1), .int_vref_mv = 2500, }, @@ -130,7 +128,7 @@ static int __devinit ad7476_probe(struct spi_device *spi) struct iio_dev *indio_dev; int ret, voltage_uv = 0; - indio_dev = iio_allocate_device(sizeof(*st)); + indio_dev = iio_device_alloc(sizeof(*st)); if (indio_dev == NULL) { ret = -ENOMEM; goto error_ret; @@ -200,7 +198,7 @@ error_disable_reg: error_put_reg: if (!IS_ERR(st->reg)) regulator_put(st->reg); - iio_free_device(indio_dev); + iio_device_free(indio_dev); error_ret: return ret; @@ -218,7 +216,7 @@ static int ad7476_remove(struct spi_device *spi) regulator_disable(st->reg); regulator_put(st->reg); } - iio_free_device(indio_dev); + iio_device_free(indio_dev); return 0; } diff --git a/drivers/staging/iio/adc/ad7476_ring.c b/drivers/staging/iio/adc/ad7476_ring.c index d6af6c05ce1..383611b0576 100644 --- a/drivers/staging/iio/adc/ad7476_ring.c +++ b/drivers/staging/iio/adc/ad7476_ring.c @@ -1,5 +1,5 @@ /* - * Copyright 2010 Analog Devices Inc. + * Copyright 2010-2012 Analog Devices Inc. * Copyright (C) 2008 Jonathan Cameron * * Licensed under the GPL-2 or later. @@ -13,43 +13,13 @@ #include <linux/slab.h> #include <linux/spi/spi.h> -#include "../iio.h" -#include "../buffer.h" -#include "../ring_sw.h" -#include "../trigger_consumer.h" +#include <linux/iio/iio.h> +#include <linux/iio/buffer.h> +#include <linux/iio/kfifo_buf.h> +#include <linux/iio/trigger_consumer.h> #include "ad7476.h" -/** - * ad7476_ring_preenable() setup the parameters of the ring before enabling - * - * The complex nature of the setting of the number of bytes per datum is due - * to this driver currently ensuring that the timestamp is stored at an 8 - * byte boundary. - **/ -static int ad7476_ring_preenable(struct iio_dev *indio_dev) -{ - struct ad7476_state *st = iio_priv(indio_dev); - struct iio_buffer *ring = indio_dev->buffer; - - st->d_size = bitmap_weight(indio_dev->active_scan_mask, - indio_dev->masklength) * - st->chip_info->channel[0].scan_type.storagebits / 8; - - if (ring->scan_timestamp) { - st->d_size += sizeof(s64); - - if (st->d_size % sizeof(s64)) - st->d_size += sizeof(s64) - (st->d_size % sizeof(s64)); - } - - if (indio_dev->buffer->access->set_bytes_per_datum) - indio_dev->buffer->access-> - set_bytes_per_datum(indio_dev->buffer, st->d_size); - - return 0; -} - static irqreturn_t ad7476_trigger_handler(int irq, void *p) { struct iio_poll_func *pf = p; @@ -59,7 +29,7 @@ static irqreturn_t ad7476_trigger_handler(int irq, void *p) __u8 *rxbuf; int b_sent; - rxbuf = kzalloc(st->d_size, GFP_KERNEL); + rxbuf = kzalloc(indio_dev->scan_bytes, GFP_KERNEL); if (rxbuf == NULL) return -ENOMEM; @@ -70,8 +40,8 @@ static irqreturn_t ad7476_trigger_handler(int irq, void *p) time_ns = iio_get_time_ns(); - if (indio_dev->buffer->scan_timestamp) - memcpy(rxbuf + st->d_size - sizeof(s64), + if (indio_dev->scan_timestamp) + memcpy(rxbuf + indio_dev->scan_bytes - sizeof(s64), &time_ns, sizeof(time_ns)); indio_dev->buffer->access->store_to(indio_dev->buffer, rxbuf, time_ns); @@ -83,7 +53,7 @@ done: } static const struct iio_buffer_setup_ops ad7476_ring_setup_ops = { - .preenable = &ad7476_ring_preenable, + .preenable = &iio_sw_buffer_preenable, .postenable = &iio_triggered_buffer_postenable, .predisable = &iio_triggered_buffer_predisable, }; @@ -93,7 +63,7 @@ int ad7476_register_ring_funcs_and_init(struct iio_dev *indio_dev) struct ad7476_state *st = iio_priv(indio_dev); int ret = 0; - indio_dev->buffer = iio_sw_rb_allocate(indio_dev); + indio_dev->buffer = iio_kfifo_allocate(indio_dev); if (!indio_dev->buffer) { ret = -ENOMEM; goto error_ret; @@ -108,7 +78,7 @@ int ad7476_register_ring_funcs_and_init(struct iio_dev *indio_dev) indio_dev->id); if (indio_dev->pollfunc == NULL) { ret = -ENOMEM; - goto error_deallocate_sw_rb; + goto error_deallocate_kfifo; } /* Ring buffer functions - here trigger setup related */ @@ -119,8 +89,8 @@ int ad7476_register_ring_funcs_and_init(struct iio_dev *indio_dev) indio_dev->modes |= INDIO_BUFFER_TRIGGERED; return 0; -error_deallocate_sw_rb: - iio_sw_rb_free(indio_dev->buffer); +error_deallocate_kfifo: + iio_kfifo_free(indio_dev->buffer); error_ret: return ret; } @@ -128,5 +98,5 @@ error_ret: void ad7476_ring_cleanup(struct iio_dev *indio_dev) { iio_dealloc_pollfunc(indio_dev->pollfunc); - iio_sw_rb_free(indio_dev->buffer); + iio_kfifo_free(indio_dev->buffer); } diff --git a/drivers/staging/iio/adc/ad7606_core.c b/drivers/staging/iio/adc/ad7606_core.c index 97e8d3d4471..f82d36c603c 100644 --- a/drivers/staging/iio/adc/ad7606_core.c +++ b/drivers/staging/iio/adc/ad7606_core.c @@ -18,9 +18,9 @@ #include <linux/sched.h> #include <linux/module.h> -#include "../iio.h" -#include "../sysfs.h" -#include "../buffer.h" +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/buffer.h> #include "ad7606.h" @@ -88,7 +88,7 @@ static int ad7606_read_raw(struct iio_dev *indio_dev, unsigned int scale_uv; switch (m) { - case 0: + case IIO_CHAN_INFO_RAW: mutex_lock(&indio_dev->mlock); if (iio_buffer_enabled(indio_dev)) ret = -EBUSY; @@ -229,14 +229,15 @@ static const struct attribute_group ad7606_attribute_group_range = { .attrs = ad7606_attributes_range, }; -#define AD7606_CHANNEL(num) \ - { \ - .type = IIO_VOLTAGE, \ - .indexed = 1, \ - .channel = num, \ - .address = num, \ - .scan_index = num, \ - .scan_type = IIO_ST('s', 16, 16, 0), \ +#define AD7606_CHANNEL(num) \ + { \ + .type = IIO_VOLTAGE, \ + .indexed = 1, \ + .channel = num, \ + .address = num, \ + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, \ + .scan_index = num, \ + .scan_type = IIO_ST('s', 16, 16, 0), \ } static struct iio_chan_spec ad7606_8_channels[] = { @@ -460,7 +461,7 @@ struct iio_dev *ad7606_probe(struct device *dev, int irq, struct ad7606_platform_data *pdata = dev->platform_data; struct ad7606_state *st; int ret; - struct iio_dev *indio_dev = iio_allocate_device(sizeof(*st)); + struct iio_dev *indio_dev = iio_device_alloc(sizeof(*st)); if (indio_dev == NULL) { ret = -ENOMEM; @@ -559,7 +560,7 @@ error_disable_reg: error_put_reg: if (!IS_ERR(st->reg)) regulator_put(st->reg); - iio_free_device(indio_dev); + iio_device_free(indio_dev); error_ret: return ERR_PTR(ret); } @@ -579,7 +580,7 @@ int ad7606_remove(struct iio_dev *indio_dev, int irq) } ad7606_free_gpios(st); - iio_free_device(indio_dev); + iio_device_free(indio_dev); return 0; } diff --git a/drivers/staging/iio/adc/ad7606_par.c b/drivers/staging/iio/adc/ad7606_par.c index bb152a8e8c9..a53faafec07 100644 --- a/drivers/staging/iio/adc/ad7606_par.c +++ b/drivers/staging/iio/adc/ad7606_par.c @@ -12,7 +12,7 @@ #include <linux/err.h> #include <linux/io.h> -#include "../iio.h" +#include <linux/iio/iio.h> #include "ad7606.h" static int ad7606_par16_read_block(struct device *dev, diff --git a/drivers/staging/iio/adc/ad7606_ring.c b/drivers/staging/iio/adc/ad7606_ring.c index 1ef9fbcaf2d..24ce8fc7164 100644 --- a/drivers/staging/iio/adc/ad7606_ring.c +++ b/drivers/staging/iio/adc/ad7606_ring.c @@ -1,5 +1,5 @@ /* - * Copyright 2011 Analog Devices Inc. + * Copyright 2011-2012 Analog Devices Inc. * * Licensed under the GPL-2. * @@ -11,10 +11,10 @@ #include <linux/kernel.h> #include <linux/slab.h> -#include "../iio.h" -#include "../buffer.h" -#include "../ring_sw.h" -#include "../trigger_consumer.h" +#include <linux/iio/iio.h> +#include <linux/iio/buffer.h> +#include <linux/iio/kfifo_buf.h> +#include <linux/iio/trigger_consumer.h> #include "ad7606.h" @@ -51,8 +51,7 @@ static void ad7606_poll_bh_to_ring(struct work_struct *work_s) __u8 *buf; int ret; - buf = kzalloc(ring->access->get_bytes_per_datum(ring), - GFP_KERNEL); + buf = kzalloc(indio_dev->scan_bytes, GFP_KERNEL); if (buf == NULL) return; @@ -82,9 +81,8 @@ static void ad7606_poll_bh_to_ring(struct work_struct *work_s) time_ns = iio_get_time_ns(); - if (ring->scan_timestamp) - *((s64 *)(buf + ring->access->get_bytes_per_datum(ring) - - sizeof(s64))) = time_ns; + if (indio_dev->scan_timestamp) + *((s64 *)(buf + indio_dev->scan_bytes - sizeof(s64))) = time_ns; ring->access->store_to(indio_dev->buffer, buf, time_ns); done: @@ -104,7 +102,7 @@ int ad7606_register_ring_funcs_and_init(struct iio_dev *indio_dev) struct ad7606_state *st = iio_priv(indio_dev); int ret; - indio_dev->buffer = iio_sw_rb_allocate(indio_dev); + indio_dev->buffer = iio_kfifo_allocate(indio_dev); if (!indio_dev->buffer) { ret = -ENOMEM; goto error_ret; @@ -119,13 +117,13 @@ int ad7606_register_ring_funcs_and_init(struct iio_dev *indio_dev) indio_dev->id); if (indio_dev->pollfunc == NULL) { ret = -ENOMEM; - goto error_deallocate_sw_rb; + goto error_deallocate_kfifo; } /* Ring buffer functions - here trigger setup related */ indio_dev->setup_ops = &ad7606_ring_setup_ops; - indio_dev->buffer->scan_timestamp = true ; + indio_dev->buffer->scan_timestamp = true; INIT_WORK(&st->poll_work, &ad7606_poll_bh_to_ring); @@ -133,8 +131,8 @@ int ad7606_register_ring_funcs_and_init(struct iio_dev *indio_dev) indio_dev->modes |= INDIO_BUFFER_TRIGGERED; return 0; -error_deallocate_sw_rb: - iio_sw_rb_free(indio_dev->buffer); +error_deallocate_kfifo: + iio_kfifo_free(indio_dev->buffer); error_ret: return ret; } @@ -142,5 +140,5 @@ error_ret: void ad7606_ring_cleanup(struct iio_dev *indio_dev) { iio_dealloc_pollfunc(indio_dev->pollfunc); - iio_sw_rb_free(indio_dev->buffer); + iio_kfifo_free(indio_dev->buffer); } diff --git a/drivers/staging/iio/adc/ad7606_spi.c b/drivers/staging/iio/adc/ad7606_spi.c index 237f1c44d29..099d347da52 100644 --- a/drivers/staging/iio/adc/ad7606_spi.c +++ b/drivers/staging/iio/adc/ad7606_spi.c @@ -11,7 +11,7 @@ #include <linux/types.h> #include <linux/err.h> -#include "../iio.h" +#include <linux/iio/iio.h> #include "ad7606.h" #define MAX_SPI_FREQ_HZ 23500000 /* VDRIVE above 4.75 V */ diff --git a/drivers/staging/iio/adc/ad7780.c b/drivers/staging/iio/adc/ad7780.c index a13e58c814e..1ece2ac8de5 100644 --- a/drivers/staging/iio/adc/ad7780.c +++ b/drivers/staging/iio/adc/ad7780.c @@ -18,8 +18,8 @@ #include <linux/gpio.h> #include <linux/module.h> -#include "../iio.h" -#include "../sysfs.h" +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> #include "ad7780.h" @@ -94,7 +94,7 @@ static int ad7780_read_raw(struct iio_dev *indio_dev, unsigned long scale_uv; switch (m) { - case 0: + case IIO_CHAN_INFO_RAW: mutex_lock(&indio_dev->mlock); ret = ad7780_read(st, &smpl); mutex_unlock(&indio_dev->mlock); @@ -126,14 +126,34 @@ static int ad7780_read_raw(struct iio_dev *indio_dev, static const struct ad7780_chip_info ad7780_chip_info_tbl[] = { [ID_AD7780] = { - .channel = IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, NULL, 0, 0, - IIO_CHAN_INFO_SCALE_SHARED_BIT, - 0, 0, IIO_ST('s', 24, 32, 8), 0), + .channel = { + .type = IIO_VOLTAGE, + .indexed = 1, + .channel = 0, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_SCALE_SHARED_BIT, + .scan_type = { + .sign = 's', + .realbits = 24, + .storagebits = 32, + .shift = 8, + }, + }, }, [ID_AD7781] = { - .channel = IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, NULL, 0, 0, - IIO_CHAN_INFO_SCALE_SHARED_BIT, - 0, 0, IIO_ST('s', 20, 32, 12), 0), + .channel = { + .type = IIO_VOLTAGE, + .indexed = 1, + .channel = 0, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_SCALE_SHARED_BIT, + .scan_type = { + .sign = 's', + .realbits = 20, + .storagebits = 32, + .shift = 12, + }, + }, }, }; @@ -167,7 +187,7 @@ static int __devinit ad7780_probe(struct spi_device *spi) return -ENODEV; } - indio_dev = iio_allocate_device(sizeof(*st)); + indio_dev = iio_device_alloc(sizeof(*st)); if (indio_dev == NULL) return -ENOMEM; @@ -245,7 +265,7 @@ error_put_reg: if (!IS_ERR(st->reg)) regulator_put(st->reg); - iio_free_device(indio_dev); + iio_device_free(indio_dev); return ret; } @@ -262,7 +282,7 @@ static int ad7780_remove(struct spi_device *spi) regulator_disable(st->reg); regulator_put(st->reg); } - iio_free_device(indio_dev); + iio_device_free(indio_dev); return 0; } diff --git a/drivers/staging/iio/adc/ad7793.c b/drivers/staging/iio/adc/ad7793.c index 84ecde1ad04..61df7964f94 100644 --- a/drivers/staging/iio/adc/ad7793.c +++ b/drivers/staging/iio/adc/ad7793.c @@ -1,7 +1,7 @@ /* * AD7792/AD7793 SPI ADC driver * - * Copyright 2011 Analog Devices Inc. + * Copyright 2011-2012 Analog Devices Inc. * * Licensed under the GPL-2. */ @@ -18,12 +18,12 @@ #include <linux/delay.h> #include <linux/module.h> -#include "../iio.h" -#include "../sysfs.h" -#include "../buffer.h" -#include "../ring_sw.h" -#include "../trigger.h" -#include "../trigger_consumer.h" +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/buffer.h> +#include <linux/iio/kfifo_buf.h> +#include <linux/iio/trigger.h> +#include <linux/iio/trigger_consumer.h> #include "ad7793.h" @@ -319,31 +319,18 @@ out: static int ad7793_ring_preenable(struct iio_dev *indio_dev) { struct ad7793_state *st = iio_priv(indio_dev); - struct iio_buffer *ring = indio_dev->buffer; - size_t d_size; unsigned channel; + int ret; if (bitmap_empty(indio_dev->active_scan_mask, indio_dev->masklength)) return -EINVAL; + ret = iio_sw_buffer_preenable(indio_dev); + if (ret < 0) + return ret; channel = find_first_bit(indio_dev->active_scan_mask, indio_dev->masklength); - d_size = bitmap_weight(indio_dev->active_scan_mask, - indio_dev->masklength) * - indio_dev->channels[0].scan_type.storagebits / 8; - - if (ring->scan_timestamp) { - d_size += sizeof(s64); - - if (d_size % sizeof(s64)) - d_size += sizeof(s64) - (d_size % sizeof(s64)); - } - - if (indio_dev->buffer->access->set_bytes_per_datum) - indio_dev->buffer->access-> - set_bytes_per_datum(indio_dev->buffer, d_size); - st->mode = (st->mode & ~AD7793_MODE_SEL(-1)) | AD7793_MODE_SEL(AD7793_MODE_CONT); st->conf = (st->conf & ~AD7793_CONF_CHAN(-1)) | @@ -399,7 +386,7 @@ static irqreturn_t ad7793_trigger_handler(int irq, void *p) indio_dev->channels[0].scan_type.realbits/8); /* Guaranteed to be aligned with 8 byte boundary */ - if (ring->scan_timestamp) + if (indio_dev->scan_timestamp) dat64[1] = pf->timestamp; ring->access->store_to(ring, (u8 *)dat64, pf->timestamp); @@ -422,7 +409,7 @@ static int ad7793_register_ring_funcs_and_init(struct iio_dev *indio_dev) { int ret; - indio_dev->buffer = iio_sw_rb_allocate(indio_dev); + indio_dev->buffer = iio_kfifo_allocate(indio_dev); if (!indio_dev->buffer) { ret = -ENOMEM; goto error_ret; @@ -435,7 +422,7 @@ static int ad7793_register_ring_funcs_and_init(struct iio_dev *indio_dev) indio_dev->id); if (indio_dev->pollfunc == NULL) { ret = -ENOMEM; - goto error_deallocate_sw_rb; + goto error_deallocate_kfifo; } /* Ring buffer functions - here trigger setup related */ @@ -445,8 +432,8 @@ static int ad7793_register_ring_funcs_and_init(struct iio_dev *indio_dev) indio_dev->modes |= INDIO_BUFFER_TRIGGERED; return 0; -error_deallocate_sw_rb: - iio_sw_rb_free(indio_dev->buffer); +error_deallocate_kfifo: + iio_kfifo_free(indio_dev->buffer); error_ret: return ret; } @@ -454,7 +441,7 @@ error_ret: static void ad7793_ring_cleanup(struct iio_dev *indio_dev) { iio_dealloc_pollfunc(indio_dev->pollfunc); - iio_sw_rb_free(indio_dev->buffer); + iio_kfifo_free(indio_dev->buffer); } /** @@ -482,7 +469,7 @@ static int ad7793_probe_trigger(struct iio_dev *indio_dev) struct ad7793_state *st = iio_priv(indio_dev); int ret; - st->trig = iio_allocate_trigger("%s-dev%d", + st->trig = iio_trigger_alloc("%s-dev%d", spi_get_device_id(st->spi)->name, indio_dev->id); if (st->trig == NULL) { @@ -516,7 +503,7 @@ static int ad7793_probe_trigger(struct iio_dev *indio_dev) error_free_irq: free_irq(st->spi->irq, indio_dev); error_free_trig: - iio_free_trigger(st->trig); + iio_trigger_free(st->trig); error_ret: return ret; } @@ -527,7 +514,7 @@ static void ad7793_remove_trigger(struct iio_dev *indio_dev) iio_trigger_unregister(st->trig); free_irq(st->spi->irq, indio_dev); - iio_free_trigger(st->trig); + iio_trigger_free(st->trig); } static const u16 sample_freq_avail[16] = {0, 470, 242, 123, 62, 50, 39, 33, 19, @@ -630,7 +617,7 @@ static int ad7793_read_raw(struct iio_dev *indio_dev, bool unipolar = !!(st->conf & AD7793_CONF_UNIPOLAR); switch (m) { - case 0: + case IIO_CHAN_INFO_RAW: mutex_lock(&indio_dev->mlock); if (iio_buffer_enabled(indio_dev)) ret = -EBUSY; @@ -760,7 +747,8 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = { .channel = 0, .channel2 = 0, .address = AD7793_CH_AIN1P_AIN1M, - .info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_SCALE_SHARED_BIT, .scan_index = 0, .scan_type = IIO_ST('s', 24, 32, 0) }, @@ -771,7 +759,8 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = { .channel = 1, .channel2 = 1, .address = AD7793_CH_AIN2P_AIN2M, - .info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_SCALE_SHARED_BIT, .scan_index = 1, .scan_type = IIO_ST('s', 24, 32, 0) }, @@ -782,7 +771,8 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = { .channel = 2, .channel2 = 2, .address = AD7793_CH_AIN3P_AIN3M, - .info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_SCALE_SHARED_BIT, .scan_index = 2, .scan_type = IIO_ST('s', 24, 32, 0) }, @@ -794,7 +784,8 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = { .channel = 2, .channel2 = 2, .address = AD7793_CH_AIN1M_AIN1M, - .info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_SCALE_SHARED_BIT, .scan_index = 2, .scan_type = IIO_ST('s', 24, 32, 0) }, @@ -803,7 +794,8 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = { .indexed = 1, .channel = 0, .address = AD7793_CH_TEMP, - .info_mask = IIO_CHAN_INFO_SCALE_SEPARATE_BIT, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_SCALE_SEPARATE_BIT, .scan_index = 4, .scan_type = IIO_ST('s', 24, 32, 0), }, @@ -813,7 +805,8 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = { .indexed = 1, .channel = 4, .address = AD7793_CH_AVDD_MONITOR, - .info_mask = IIO_CHAN_INFO_SCALE_SEPARATE_BIT, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_SCALE_SEPARATE_BIT, .scan_index = 5, .scan_type = IIO_ST('s', 24, 32, 0), }, @@ -827,7 +820,8 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = { .channel = 0, .channel2 = 0, .address = AD7793_CH_AIN1P_AIN1M, - .info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_SCALE_SHARED_BIT, .scan_index = 0, .scan_type = IIO_ST('s', 16, 32, 0) }, @@ -838,7 +832,8 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = { .channel = 1, .channel2 = 1, .address = AD7793_CH_AIN2P_AIN2M, - .info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_SCALE_SHARED_BIT, .scan_index = 1, .scan_type = IIO_ST('s', 16, 32, 0) }, @@ -849,7 +844,8 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = { .channel = 2, .channel2 = 2, .address = AD7793_CH_AIN3P_AIN3M, - .info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_SCALE_SHARED_BIT, .scan_index = 2, .scan_type = IIO_ST('s', 16, 32, 0) }, @@ -861,7 +857,8 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = { .channel = 2, .channel2 = 2, .address = AD7793_CH_AIN1M_AIN1M, - .info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_SCALE_SHARED_BIT, .scan_index = 2, .scan_type = IIO_ST('s', 16, 32, 0) }, @@ -870,7 +867,8 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = { .indexed = 1, .channel = 0, .address = AD7793_CH_TEMP, - .info_mask = IIO_CHAN_INFO_SCALE_SEPARATE_BIT, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_SCALE_SEPARATE_BIT, .scan_index = 4, .scan_type = IIO_ST('s', 16, 32, 0), }, @@ -880,7 +878,8 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = { .indexed = 1, .channel = 4, .address = AD7793_CH_AVDD_MONITOR, - .info_mask = IIO_CHAN_INFO_SCALE_SEPARATE_BIT, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_SCALE_SEPARATE_BIT, .scan_index = 5, .scan_type = IIO_ST('s', 16, 32, 0), }, @@ -905,7 +904,7 @@ static int __devinit ad7793_probe(struct spi_device *spi) return -ENODEV; } - indio_dev = iio_allocate_device(sizeof(*st)); + indio_dev = iio_device_alloc(sizeof(*st)); if (indio_dev == NULL) return -ENOMEM; @@ -989,7 +988,7 @@ error_put_reg: if (!IS_ERR(st->reg)) regulator_put(st->reg); - iio_free_device(indio_dev); + iio_device_free(indio_dev); return ret; } @@ -1009,7 +1008,7 @@ static int ad7793_remove(struct spi_device *spi) regulator_put(st->reg); } - iio_free_device(indio_dev); + iio_device_free(indio_dev); return 0; } diff --git a/drivers/staging/iio/adc/ad7816.c b/drivers/staging/iio/adc/ad7816.c index 52b720e2b03..c97da5b6643 100644 --- a/drivers/staging/iio/adc/ad7816.c +++ b/drivers/staging/iio/adc/ad7816.c @@ -16,9 +16,9 @@ #include <linux/spi/spi.h> #include <linux/module.h> -#include "../iio.h" -#include "../sysfs.h" -#include "../events.h" +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/events.h> /* * AD7816 config masks @@ -354,7 +354,7 @@ static int __devinit ad7816_probe(struct spi_device *spi_dev) return -EINVAL; } - indio_dev = iio_allocate_device(sizeof(*chip)); + indio_dev = iio_device_alloc(sizeof(*chip)); if (indio_dev == NULL) { ret = -ENOMEM; goto error_ret; @@ -426,7 +426,7 @@ error_free_gpio_convert: error_free_gpio_rdwr: gpio_free(chip->rdwr_pin); error_free_device: - iio_free_device(indio_dev); + iio_device_free(indio_dev); error_ret: return ret; } @@ -443,7 +443,7 @@ static int __devexit ad7816_remove(struct spi_device *spi_dev) gpio_free(chip->busy_pin); gpio_free(chip->convert_pin); gpio_free(chip->rdwr_pin); - iio_free_device(indio_dev); + iio_device_free(indio_dev); return 0; } diff --git a/drivers/staging/iio/adc/ad7887.h b/drivers/staging/iio/adc/ad7887.h index bc53b653212..2e09e54fc9c 100644 --- a/drivers/staging/iio/adc/ad7887.h +++ b/drivers/staging/iio/adc/ad7887.h @@ -63,7 +63,6 @@ struct ad7887_state { struct spi_device *spi; const struct ad7887_chip_info *chip_info; struct regulator *reg; - size_t d_size; u16 int_vref_mv; struct spi_transfer xfer[4]; struct spi_message msg[3]; diff --git a/drivers/staging/iio/adc/ad7887_core.c b/drivers/staging/iio/adc/ad7887_core.c index e9bbc3eed15..7186074deeb 100644 --- a/drivers/staging/iio/adc/ad7887_core.c +++ b/drivers/staging/iio/adc/ad7887_core.c @@ -15,9 +15,9 @@ #include <linux/err.h> #include <linux/module.h> -#include "../iio.h" -#include "../sysfs.h" -#include "../buffer.h" +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/buffer.h> #include "ad7887.h" @@ -42,7 +42,7 @@ static int ad7887_read_raw(struct iio_dev *indio_dev, unsigned int scale_uv; switch (m) { - case 0: + case IIO_CHAN_INFO_RAW: mutex_lock(&indio_dev->mlock); if (iio_buffer_enabled(indio_dev)) ret = -EBUSY; @@ -75,7 +75,8 @@ static const struct ad7887_chip_info ad7887_chip_info_tbl[] = { .type = IIO_VOLTAGE, .indexed = 1, .channel = 1, - .info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_SCALE_SHARED_BIT, .address = 1, .scan_index = 1, .scan_type = IIO_ST('u', 12, 16, 0), @@ -84,7 +85,8 @@ static const struct ad7887_chip_info ad7887_chip_info_tbl[] = { .type = IIO_VOLTAGE, .indexed = 1, .channel = 0, - .info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_SCALE_SHARED_BIT, .address = 0, .scan_index = 0, .scan_type = IIO_ST('u', 12, 16, 0), @@ -104,7 +106,7 @@ static int __devinit ad7887_probe(struct spi_device *spi) struct ad7887_platform_data *pdata = spi->dev.platform_data; struct ad7887_state *st; int ret, voltage_uv = 0; - struct iio_dev *indio_dev = iio_allocate_device(sizeof(*st)); + struct iio_dev *indio_dev = iio_device_alloc(sizeof(*st)); if (indio_dev == NULL) return -ENOMEM; @@ -220,7 +222,7 @@ error_disable_reg: error_put_reg: if (!IS_ERR(st->reg)) regulator_put(st->reg); - iio_free_device(indio_dev); + iio_device_free(indio_dev); return ret; } @@ -237,7 +239,7 @@ static int ad7887_remove(struct spi_device *spi) regulator_disable(st->reg); regulator_put(st->reg); } - iio_free_device(indio_dev); + iio_device_free(indio_dev); return 0; } diff --git a/drivers/staging/iio/adc/ad7887_ring.c b/drivers/staging/iio/adc/ad7887_ring.c index d1809079b63..fd91384db89 100644 --- a/drivers/staging/iio/adc/ad7887_ring.c +++ b/drivers/staging/iio/adc/ad7887_ring.c @@ -1,5 +1,5 @@ /* - * Copyright 2010-2011 Analog Devices Inc. + * Copyright 2010-2012 Analog Devices Inc. * Copyright (C) 2008 Jonathan Cameron * * Licensed under the GPL-2. @@ -12,10 +12,10 @@ #include <linux/slab.h> #include <linux/spi/spi.h> -#include "../iio.h" -#include "../buffer.h" -#include "../ring_sw.h" -#include "../trigger_consumer.h" +#include <linux/iio/iio.h> +#include <linux/iio/buffer.h> +#include <linux/iio/kfifo_buf.h> +#include <linux/iio/trigger_consumer.h> #include "ad7887.h" @@ -29,22 +29,11 @@ static int ad7887_ring_preenable(struct iio_dev *indio_dev) { struct ad7887_state *st = iio_priv(indio_dev); - struct iio_buffer *ring = indio_dev->buffer; - - st->d_size = bitmap_weight(indio_dev->active_scan_mask, - indio_dev->masklength) * - st->chip_info->channel[0].scan_type.storagebits / 8; - - if (ring->scan_timestamp) { - st->d_size += sizeof(s64); - - if (st->d_size % sizeof(s64)) - st->d_size += sizeof(s64) - (st->d_size % sizeof(s64)); - } + int ret; - if (indio_dev->buffer->access->set_bytes_per_datum) - indio_dev->buffer->access-> - set_bytes_per_datum(indio_dev->buffer, st->d_size); + ret = iio_sw_buffer_preenable(indio_dev); + if (ret < 0) + return ret; /* We know this is a single long so can 'cheat' */ switch (*indio_dev->active_scan_mask) { @@ -83,7 +72,6 @@ static irqreturn_t ad7887_trigger_handler(int irq, void *p) struct iio_poll_func *pf = p; struct iio_dev *indio_dev = pf->indio_dev; struct ad7887_state *st = iio_priv(indio_dev); - struct iio_buffer *ring = indio_dev->buffer; s64 time_ns; __u8 *buf; int b_sent; @@ -92,7 +80,7 @@ static irqreturn_t ad7887_trigger_handler(int irq, void *p) indio_dev->masklength) * st->chip_info->channel[0].scan_type.storagebits / 8; - buf = kzalloc(st->d_size, GFP_KERNEL); + buf = kzalloc(indio_dev->scan_bytes, GFP_KERNEL); if (buf == NULL) return -ENOMEM; @@ -103,8 +91,8 @@ static irqreturn_t ad7887_trigger_handler(int irq, void *p) time_ns = iio_get_time_ns(); memcpy(buf, st->data, bytes); - if (ring->scan_timestamp) - memcpy(buf + st->d_size - sizeof(s64), + if (indio_dev->scan_timestamp) + memcpy(buf + indio_dev->scan_bytes - sizeof(s64), &time_ns, sizeof(time_ns)); indio_dev->buffer->access->store_to(indio_dev->buffer, buf, time_ns); @@ -126,7 +114,7 @@ int ad7887_register_ring_funcs_and_init(struct iio_dev *indio_dev) { int ret; - indio_dev->buffer = iio_sw_rb_allocate(indio_dev); + indio_dev->buffer = iio_kfifo_allocate(indio_dev); if (!indio_dev->buffer) { ret = -ENOMEM; goto error_ret; @@ -139,7 +127,7 @@ int ad7887_register_ring_funcs_and_init(struct iio_dev *indio_dev) indio_dev->id); if (indio_dev->pollfunc == NULL) { ret = -ENOMEM; - goto error_deallocate_sw_rb; + goto error_deallocate_kfifo; } /* Ring buffer functions - here trigger setup related */ indio_dev->setup_ops = &ad7887_ring_setup_ops; @@ -148,8 +136,8 @@ int ad7887_register_ring_funcs_and_init(struct iio_dev *indio_dev) indio_dev->modes |= INDIO_BUFFER_TRIGGERED; return 0; -error_deallocate_sw_rb: - iio_sw_rb_free(indio_dev->buffer); +error_deallocate_kfifo: + iio_kfifo_free(indio_dev->buffer); error_ret: return ret; } @@ -157,5 +145,5 @@ error_ret: void ad7887_ring_cleanup(struct iio_dev *indio_dev) { iio_dealloc_pollfunc(indio_dev->pollfunc); - iio_sw_rb_free(indio_dev->buffer); + iio_kfifo_free(indio_dev->buffer); } diff --git a/drivers/staging/iio/adc/ad799x.h b/drivers/staging/iio/adc/ad799x.h index 356f690a76f..99f8abe9731 100644 --- a/drivers/staging/iio/adc/ad799x.h +++ b/drivers/staging/iio/adc/ad799x.h @@ -104,7 +104,6 @@ struct ad799x_chip_info { struct ad799x_state { struct i2c_client *client; const struct ad799x_chip_info *chip_info; - size_t d_size; struct iio_trigger *trig; struct regulator *reg; u16 int_vref_mv; diff --git a/drivers/staging/iio/adc/ad799x_core.c b/drivers/staging/iio/adc/ad799x_core.c index a8458669350..cc637b5a36e 100644 --- a/drivers/staging/iio/adc/ad799x_core.c +++ b/drivers/staging/iio/adc/ad799x_core.c @@ -33,10 +33,10 @@ #include <linux/err.h> #include <linux/module.h> -#include "../iio.h" -#include "../sysfs.h" -#include "../events.h" -#include "../buffer.h" +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/events.h> +#include <linux/iio/buffer.h> #include "ad799x.h" @@ -148,7 +148,7 @@ static int ad799x_read_raw(struct iio_dev *indio_dev, unsigned int scale_uv; switch (m) { - case 0: + case IIO_CHAN_INFO_RAW: mutex_lock(&indio_dev->mlock); if (iio_buffer_enabled(indio_dev)) ret = -EBUSY; @@ -454,6 +454,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = { .type = IIO_VOLTAGE, .indexed = 1, .channel = 0, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, .scan_index = 0, .scan_type = IIO_ST('u', 12, 16, 0), }, @@ -461,6 +462,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = { .type = IIO_VOLTAGE, .indexed = 1, .channel = 1, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, .scan_index = 1, .scan_type = IIO_ST('u', 12, 16, 0), }, @@ -468,6 +470,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = { .type = IIO_VOLTAGE, .indexed = 1, .channel = 2, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, .scan_index = 2, .scan_type = IIO_ST('u', 12, 16, 0), }, @@ -475,6 +478,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = { .type = IIO_VOLTAGE, .indexed = 1, .channel = 3, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, .scan_index = 3, .scan_type = IIO_ST('u', 12, 16, 0), }, @@ -490,6 +494,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = { .type = IIO_VOLTAGE, .indexed = 1, .channel = 0, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, .scan_index = 0, .scan_type = IIO_ST('u', 10, 16, 2), }, @@ -497,6 +502,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = { .type = IIO_VOLTAGE, .indexed = 1, .channel = 1, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, .scan_index = 1, .scan_type = IIO_ST('u', 10, 16, 2), }, @@ -504,6 +510,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = { .type = IIO_VOLTAGE, .indexed = 1, .channel = 2, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, .scan_index = 2, .scan_type = IIO_ST('u', 10, 16, 2), }, @@ -511,6 +518,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = { .type = IIO_VOLTAGE, .indexed = 1, .channel = 3, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, .scan_index = 3, .scan_type = IIO_ST('u', 10, 16, 2), }, @@ -526,6 +534,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = { .type = IIO_VOLTAGE, .indexed = 1, .channel = 0, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, .scan_index = 0, .scan_type = IIO_ST('u', 8, 16, 4), }, @@ -533,6 +542,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = { .type = IIO_VOLTAGE, .indexed = 1, .channel = 1, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, .scan_index = 1, .scan_type = IIO_ST('u', 8, 16, 4), }, @@ -540,6 +550,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = { .type = IIO_VOLTAGE, .indexed = 1, .channel = 2, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, .scan_index = 2, .scan_type = IIO_ST('u', 8, 16, 4), }, @@ -547,6 +558,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = { .type = IIO_VOLTAGE, .indexed = 1, .channel = 3, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, .scan_index = 3, .scan_type = IIO_ST('u', 8, 16, 4), }, @@ -562,6 +574,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = { .type = IIO_VOLTAGE, .indexed = 1, .channel = 0, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, .scan_index = 0, .scan_type = IIO_ST('u', 12, 16, 0), .event_mask = AD799X_EV_MASK, @@ -570,6 +583,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = { .type = IIO_VOLTAGE, .indexed = 1, .channel = 1, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, .scan_index = 1, .scan_type = IIO_ST('u', 12, 16, 0), .event_mask = AD799X_EV_MASK, @@ -587,6 +601,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = { .type = IIO_VOLTAGE, .indexed = 1, .channel = 0, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, .scan_index = 0, .scan_type = IIO_ST('u', 10, 16, 2), .event_mask = AD799X_EV_MASK, @@ -596,6 +611,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = { .indexed = 1, .channel = 1, .scan_index = 1, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, .scan_type = IIO_ST('u', 10, 16, 2), .event_mask = AD799X_EV_MASK, }, @@ -603,6 +619,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = { .type = IIO_VOLTAGE, .indexed = 1, .channel = 2, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, .scan_index = 2, .scan_type = IIO_ST('u', 10, 16, 2), .event_mask = AD799X_EV_MASK, @@ -611,6 +628,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = { .type = IIO_VOLTAGE, .indexed = 1, .channel = 3, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, .scan_index = 3, .scan_type = IIO_ST('u', 10, 16, 2), .event_mask = AD799X_EV_MASK, @@ -628,6 +646,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = { .type = IIO_VOLTAGE, .indexed = 1, .channel = 0, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, .scan_index = 0, .scan_type = IIO_ST('u', 12, 16, 0), .event_mask = AD799X_EV_MASK, @@ -636,6 +655,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = { .type = IIO_VOLTAGE, .indexed = 1, .channel = 1, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, .scan_index = 1, .scan_type = IIO_ST('u', 12, 16, 0), .event_mask = AD799X_EV_MASK, @@ -644,6 +664,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = { .type = IIO_VOLTAGE, .indexed = 1, .channel = 2, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, .scan_index = 2, .scan_type = IIO_ST('u', 12, 16, 0), .event_mask = AD799X_EV_MASK, @@ -652,6 +673,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = { .type = IIO_VOLTAGE, .indexed = 1, .channel = 3, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, .scan_index = 3, .scan_type = IIO_ST('u', 12, 16, 0), .event_mask = AD799X_EV_MASK, @@ -669,6 +691,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = { .type = IIO_VOLTAGE, .indexed = 1, .channel = 0, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, .scan_index = 0, .scan_type = IIO_ST('u', 10, 16, 2), .event_mask = AD799X_EV_MASK, @@ -677,6 +700,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = { .type = IIO_VOLTAGE, .indexed = 1, .channel = 1, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, .scan_index = 1, .scan_type = IIO_ST('u', 10, 16, 2), .event_mask = AD799X_EV_MASK, @@ -685,6 +709,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = { .type = IIO_VOLTAGE, .indexed = 1, .channel = 2, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, .scan_index = 2, .scan_type = IIO_ST('u', 10, 16, 2), .event_mask = AD799X_EV_MASK, @@ -693,6 +718,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = { .type = IIO_VOLTAGE, .indexed = 1, .channel = 3, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, .scan_index = 3, .scan_type = IIO_ST('u', 10, 16, 2), .event_mask = AD799X_EV_MASK, @@ -701,6 +727,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = { .type = IIO_VOLTAGE, .indexed = 1, .channel = 4, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, .scan_index = 4, .scan_type = IIO_ST('u', 10, 16, 2), }, @@ -708,6 +735,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = { .type = IIO_VOLTAGE, .indexed = 1, .channel = 5, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, .scan_index = 5, .scan_type = IIO_ST('u', 10, 16, 2), }, @@ -715,6 +743,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = { .type = IIO_VOLTAGE, .indexed = 1, .channel = 6, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, .scan_index = 6, .scan_type = IIO_ST('u', 10, 16, 2), }, @@ -722,6 +751,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = { .type = IIO_VOLTAGE, .indexed = 1, .channel = 7, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, .scan_index = 7, .scan_type = IIO_ST('u', 10, 16, 2), }, @@ -738,6 +768,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = { .type = IIO_VOLTAGE, .indexed = 1, .channel = 0, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, .scan_index = 0, .scan_type = IIO_ST('u', 12, 16, 0), .event_mask = AD799X_EV_MASK, @@ -746,6 +777,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = { .type = IIO_VOLTAGE, .indexed = 1, .channel = 1, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, .scan_index = 1, .scan_type = IIO_ST('u', 12, 16, 0), .event_mask = AD799X_EV_MASK, @@ -754,6 +786,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = { .type = IIO_VOLTAGE, .indexed = 1, .channel = 2, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, .scan_index = 2, .scan_type = IIO_ST('u', 12, 16, 0), .event_mask = AD799X_EV_MASK, @@ -762,6 +795,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = { .type = IIO_VOLTAGE, .indexed = 1, .channel = 3, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, .scan_index = 3, .scan_type = IIO_ST('u', 12, 16, 0), .event_mask = AD799X_EV_MASK, @@ -770,6 +804,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = { .type = IIO_VOLTAGE, .indexed = 1, .channel = 4, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, .scan_index = 4, .scan_type = IIO_ST('u', 12, 16, 0), }, @@ -777,6 +812,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = { .type = IIO_VOLTAGE, .indexed = 1, .channel = 5, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, .scan_index = 5, .scan_type = IIO_ST('u', 12, 16, 0), }, @@ -784,6 +820,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = { .type = IIO_VOLTAGE, .indexed = 1, .channel = 6, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, .scan_index = 6, .scan_type = IIO_ST('u', 12, 16, 0), }, @@ -791,6 +828,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = { .type = IIO_VOLTAGE, .indexed = 1, .channel = 7, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, .scan_index = 7, .scan_type = IIO_ST('u', 12, 16, 0), }, @@ -809,7 +847,7 @@ static int __devinit ad799x_probe(struct i2c_client *client, int ret; struct ad799x_platform_data *pdata = client->dev.platform_data; struct ad799x_state *st; - struct iio_dev *indio_dev = iio_allocate_device(sizeof(*st)); + struct iio_dev *indio_dev = iio_device_alloc(sizeof(*st)); if (indio_dev == NULL) return -ENOMEM; @@ -882,7 +920,7 @@ error_disable_reg: error_put_reg: if (!IS_ERR(st->reg)) regulator_put(st->reg); - iio_free_device(indio_dev); + iio_device_free(indio_dev); return ret; } @@ -902,7 +940,7 @@ static __devexit int ad799x_remove(struct i2c_client *client) regulator_disable(st->reg); regulator_put(st->reg); } - iio_free_device(indio_dev); + iio_device_free(indio_dev); return 0; } diff --git a/drivers/staging/iio/adc/ad799x_ring.c b/drivers/staging/iio/adc/ad799x_ring.c index 069765cab27..1c7ff4423db 100644 --- a/drivers/staging/iio/adc/ad799x_ring.c +++ b/drivers/staging/iio/adc/ad799x_ring.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2010 Michael Hennerich, Analog Devices Inc. + * Copyright (C) 2010-2012 Michael Hennerich, Analog Devices Inc. * Copyright (C) 2008-2010 Jonathan Cameron * * This program is free software; you can redistribute it and/or modify @@ -16,10 +16,10 @@ #include <linux/i2c.h> #include <linux/bitops.h> -#include "../iio.h" -#include "../buffer.h" -#include "../ring_sw.h" -#include "../trigger_consumer.h" +#include <linux/iio/iio.h> +#include <linux/iio/buffer.h> +#include <linux/iio/kfifo_buf.h> +#include <linux/iio/trigger_consumer.h> #include "ad799x.h" @@ -32,9 +32,7 @@ **/ static int ad799x_ring_preenable(struct iio_dev *indio_dev) { - struct iio_buffer *ring = indio_dev->buffer; struct ad799x_state *st = iio_priv(indio_dev); - /* * Need to figure out the current mode based upon the requested * scan mask in iio_dev @@ -43,21 +41,7 @@ static int ad799x_ring_preenable(struct iio_dev *indio_dev) if (st->id == ad7997 || st->id == ad7998) ad7997_8_set_scan_mode(st, *indio_dev->active_scan_mask); - st->d_size = bitmap_weight(indio_dev->active_scan_mask, - indio_dev->masklength) * 2; - - if (ring->scan_timestamp) { - st->d_size += sizeof(s64); - - if (st->d_size % sizeof(s64)) - st->d_size += sizeof(s64) - (st->d_size % sizeof(s64)); - } - - if (indio_dev->buffer->access->set_bytes_per_datum) - indio_dev->buffer->access-> - set_bytes_per_datum(indio_dev->buffer, st->d_size); - - return 0; + return iio_sw_buffer_preenable(indio_dev); } /** @@ -78,7 +62,7 @@ static irqreturn_t ad799x_trigger_handler(int irq, void *p) int b_sent; u8 cmd; - rxbuf = kmalloc(st->d_size, GFP_KERNEL); + rxbuf = kmalloc(indio_dev->scan_bytes, GFP_KERNEL); if (rxbuf == NULL) goto out; @@ -111,8 +95,8 @@ static irqreturn_t ad799x_trigger_handler(int irq, void *p) time_ns = iio_get_time_ns(); - if (ring->scan_timestamp) - memcpy(rxbuf + st->d_size - sizeof(s64), + if (indio_dev->scan_timestamp) + memcpy(rxbuf + indio_dev->scan_bytes - sizeof(s64), &time_ns, sizeof(time_ns)); ring->access->store_to(indio_dev->buffer, rxbuf, time_ns); @@ -136,7 +120,7 @@ int ad799x_register_ring_funcs_and_init(struct iio_dev *indio_dev) { int ret = 0; - indio_dev->buffer = iio_sw_rb_allocate(indio_dev); + indio_dev->buffer = iio_kfifo_allocate(indio_dev); if (!indio_dev->buffer) { ret = -ENOMEM; goto error_ret; @@ -150,7 +134,7 @@ int ad799x_register_ring_funcs_and_init(struct iio_dev *indio_dev) indio_dev->id); if (indio_dev->pollfunc == NULL) { ret = -ENOMEM; - goto error_deallocate_sw_rb; + goto error_deallocate_kfifo; } /* Ring buffer functions - here trigger setup related */ @@ -161,8 +145,8 @@ int ad799x_register_ring_funcs_and_init(struct iio_dev *indio_dev) indio_dev->modes |= INDIO_BUFFER_TRIGGERED; return 0; -error_deallocate_sw_rb: - iio_sw_rb_free(indio_dev->buffer); +error_deallocate_kfifo: + iio_kfifo_free(indio_dev->buffer); error_ret: return ret; } @@ -170,5 +154,5 @@ error_ret: void ad799x_ring_cleanup(struct iio_dev *indio_dev) { iio_dealloc_pollfunc(indio_dev->pollfunc); - iio_sw_rb_free(indio_dev->buffer); + iio_kfifo_free(indio_dev->buffer); } diff --git a/drivers/staging/iio/adc/adt7310.c b/drivers/staging/iio/adc/adt7310.c index caf57c1169b..ba4e571a112 100644 --- a/drivers/staging/iio/adc/adt7310.c +++ b/drivers/staging/iio/adc/adt7310.c @@ -15,9 +15,9 @@ #include <linux/spi/spi.h> #include <linux/module.h> -#include "../iio.h" -#include "../sysfs.h" -#include "../events.h" +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/events.h> /* * ADT7310 registers definition */ @@ -753,7 +753,7 @@ static int __devinit adt7310_probe(struct spi_device *spi_dev) unsigned long *adt7310_platform_data = spi_dev->dev.platform_data; unsigned long irq_flags; - indio_dev = iio_allocate_device(sizeof(*chip)); + indio_dev = iio_device_alloc(sizeof(*chip)); if (indio_dev == NULL) { ret = -ENOMEM; goto error_ret; @@ -833,7 +833,7 @@ error_unreg_int_irq: error_unreg_ct_irq: free_irq(spi_dev->irq, indio_dev); error_free_dev: - iio_free_device(indio_dev); + iio_device_free(indio_dev); error_ret: return ret; } @@ -849,7 +849,7 @@ static int __devexit adt7310_remove(struct spi_device *spi_dev) free_irq(adt7310_platform_data[0], indio_dev); if (spi_dev->irq) free_irq(spi_dev->irq, indio_dev); - iio_free_device(indio_dev); + iio_device_free(indio_dev); return 0; } diff --git a/drivers/staging/iio/adc/adt7410.c b/drivers/staging/iio/adc/adt7410.c index dff3e8ca2d7..2d4b5c6cd8f 100644 --- a/drivers/staging/iio/adc/adt7410.c +++ b/drivers/staging/iio/adc/adt7410.c @@ -15,9 +15,9 @@ #include <linux/i2c.h> #include <linux/module.h> -#include "../iio.h" -#include "../sysfs.h" -#include "../events.h" +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/events.h> /* * ADT7410 registers definition @@ -721,7 +721,7 @@ static int __devinit adt7410_probe(struct i2c_client *client, int ret = 0; unsigned long *adt7410_platform_data = client->dev.platform_data; - indio_dev = iio_allocate_device(sizeof(*chip)); + indio_dev = iio_device_alloc(sizeof(*chip)); if (indio_dev == NULL) { ret = -ENOMEM; goto error_ret; @@ -797,7 +797,7 @@ error_unreg_int_irq: error_unreg_ct_irq: free_irq(client->irq, indio_dev); error_free_dev: - iio_free_device(indio_dev); + iio_device_free(indio_dev); error_ret: return ret; } @@ -812,7 +812,7 @@ static int __devexit adt7410_remove(struct i2c_client *client) free_irq(adt7410_platform_data[0], indio_dev); if (client->irq) free_irq(client->irq, indio_dev); - iio_free_device(indio_dev); + iio_device_free(indio_dev); return 0; } diff --git a/drivers/staging/iio/adc/lpc32xx_adc.c b/drivers/staging/iio/adc/lpc32xx_adc.c index dfc9033843a..9690306d1f8 100644 --- a/drivers/staging/iio/adc/lpc32xx_adc.c +++ b/drivers/staging/iio/adc/lpc32xx_adc.c @@ -30,9 +30,10 @@ #include <linux/clk.h> #include <linux/err.h> #include <linux/completion.h> +#include <linux/of.h> -#include "../iio.h" -#include "../sysfs.h" +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> /* * LPC32XX registers definitions @@ -73,7 +74,7 @@ static int lpc32xx_read_raw(struct iio_dev *indio_dev, { struct lpc32xx_adc_info *info = iio_priv(indio_dev); - if (mask == 0) { + if (mask == IIO_CHAN_INFO_RAW) { mutex_lock(&indio_dev->mlock); clk_enable(info->clk); /* Measurement setup */ @@ -98,12 +99,13 @@ static const struct iio_info lpc32xx_adc_iio_info = { .driver_module = THIS_MODULE, }; -#define LPC32XX_ADC_CHANNEL(_index) { \ - .type = IIO_VOLTAGE, \ - .indexed = 1, \ - .channel = _index, \ - .address = AD_IN * _index, \ - .scan_index = _index, \ +#define LPC32XX_ADC_CHANNEL(_index) { \ + .type = IIO_VOLTAGE, \ + .indexed = 1, \ + .channel = _index, \ + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, \ + .address = AD_IN * _index, \ + .scan_index = _index, \ } static struct iio_chan_spec lpc32xx_adc_iio_channels[] = { @@ -139,7 +141,7 @@ static int __devinit lpc32xx_adc_probe(struct platform_device *pdev) goto errout1; } - iodev = iio_allocate_device(sizeof(struct lpc32xx_adc_info)); + iodev = iio_device_alloc(sizeof(struct lpc32xx_adc_info)); if (!iodev) { dev_err(&pdev->dev, "failed allocating iio device\n"); retval = -ENOMEM; @@ -200,7 +202,7 @@ errout4: errout3: iounmap(info->adc_base); errout2: - iio_free_device(iodev); + iio_device_free(iodev); errout1: return retval; } @@ -216,17 +218,26 @@ static int __devexit lpc32xx_adc_remove(struct platform_device *pdev) platform_set_drvdata(pdev, NULL); clk_put(info->clk); iounmap(info->adc_base); - iio_free_device(iodev); + iio_device_free(iodev); return 0; } +#ifdef CONFIG_OF +static const struct of_device_id lpc32xx_adc_match[] = { + { .compatible = "nxp,lpc3220-adc" }, + {}, +}; +MODULE_DEVICE_TABLE(of, lpc32xx_adc_match); +#endif + static struct platform_driver lpc32xx_adc_driver = { .probe = lpc32xx_adc_probe, .remove = __devexit_p(lpc32xx_adc_remove), .driver = { .name = MOD_NAME, .owner = THIS_MODULE, + .of_match_table = of_match_ptr(lpc32xx_adc_match), }, }; diff --git a/drivers/staging/iio/adc/max1363_core.c b/drivers/staging/iio/adc/max1363_core.c index cf3e2ca7e31..572a500d6e5 100644 --- a/drivers/staging/iio/adc/max1363_core.c +++ b/drivers/staging/iio/adc/max1363_core.c @@ -32,10 +32,11 @@ #include <linux/err.h> #include <linux/module.h> -#include "../iio.h" -#include "../sysfs.h" -#include "../events.h" -#include "../buffer.h" +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/events.h> +#include <linux/iio/buffer.h> +#include <linux/iio/driver.h> #include "max1363.h" @@ -248,7 +249,7 @@ static int max1363_read_raw(struct iio_dev *indio_dev, struct max1363_state *st = iio_priv(indio_dev); int ret; switch (m) { - case 0: + case IIO_CHAN_INFO_RAW: ret = max1363_read_single_chan(indio_dev, chan, val, m); if (ret < 0) return ret; @@ -281,7 +282,8 @@ static const enum max1363_modes max1363_mode_list[] = { #define MAX1363_EV_M \ (IIO_EV_BIT(IIO_EV_TYPE_THRESH, IIO_EV_DIR_RISING) \ | IIO_EV_BIT(IIO_EV_TYPE_THRESH, IIO_EV_DIR_FALLING)) -#define MAX1363_INFO_MASK IIO_CHAN_INFO_SCALE_SHARED_BIT +#define MAX1363_INFO_MASK (IIO_CHAN_INFO_RAW_SEPARATE_BIT | \ + IIO_CHAN_INFO_SCALE_SHARED_BIT) #define MAX1363_CHAN_U(num, addr, si, bits, evmask) \ { \ .type = IIO_VOLTAGE, \ @@ -830,6 +832,7 @@ static struct attribute_group max1363_event_attribute_group = { static const struct iio_info max1238_info = { .read_raw = &max1363_read_raw, .driver_module = THIS_MODULE, + .update_scan_mode = &max1363_update_scan_mode, }; static const struct iio_info max1363_info = { @@ -1284,11 +1287,14 @@ static int __devinit max1363_probe(struct i2c_client *client, if (ret) goto error_put_reg; - indio_dev = iio_allocate_device(sizeof(struct max1363_state)); + indio_dev = iio_device_alloc(sizeof(struct max1363_state)); if (indio_dev == NULL) { ret = -ENOMEM; goto error_disable_reg; } + ret = iio_map_array_register(indio_dev, client->dev.platform_data); + if (ret < 0) + goto error_free_device; st = iio_priv(indio_dev); st->reg = reg; /* this is only used for device removal purposes */ @@ -1299,7 +1305,7 @@ static int __devinit max1363_probe(struct i2c_client *client, ret = max1363_alloc_scan_masks(indio_dev); if (ret) - goto error_free_device; + goto error_unregister_map; /* Estabilish that the iio_dev is a child of the i2c device */ indio_dev->dev.parent = &client->dev; @@ -1349,8 +1355,10 @@ error_cleanup_ring: max1363_ring_cleanup(indio_dev); error_free_available_scan_masks: kfree(indio_dev->available_scan_masks); +error_unregister_map: + iio_map_array_unregister(indio_dev, client->dev.platform_data); error_free_device: - iio_free_device(indio_dev); + iio_device_free(indio_dev); error_disable_reg: regulator_disable(reg); error_put_reg: @@ -1375,7 +1383,8 @@ static int max1363_remove(struct i2c_client *client) regulator_disable(reg); regulator_put(reg); } - iio_free_device(indio_dev); + iio_map_array_unregister(indio_dev, client->dev.platform_data); + iio_device_free(indio_dev); return 0; } diff --git a/drivers/staging/iio/adc/max1363_ring.c b/drivers/staging/iio/adc/max1363_ring.c index d0a60a38293..b3020130012 100644 --- a/drivers/staging/iio/adc/max1363_ring.c +++ b/drivers/staging/iio/adc/max1363_ring.c @@ -14,10 +14,10 @@ #include <linux/i2c.h> #include <linux/bitops.h> -#include "../iio.h" -#include "../buffer.h" +#include <linux/iio/iio.h> +#include <linux/iio/buffer.h> #include "../ring_sw.h" -#include "../trigger_consumer.h" +#include <linux/iio/trigger_consumer.h> #include "max1363.h" @@ -54,7 +54,7 @@ static irqreturn_t max1363_trigger_handler(int irq, void *p) d_size = numvals*2; else d_size = numvals; - if (indio_dev->buffer->scan_timestamp) { + if (indio_dev->scan_timestamp) { d_size += sizeof(s64); if (d_size % sizeof(s64)) d_size += sizeof(s64) - (d_size % sizeof(s64)); @@ -78,7 +78,7 @@ static irqreturn_t max1363_trigger_handler(int irq, void *p) time_ns = iio_get_time_ns(); - if (indio_dev->buffer->scan_timestamp) + if (indio_dev->scan_timestamp) memcpy(rxbuf + d_size - sizeof(s64), &time_ns, sizeof(time_ns)); iio_push_to_buffer(indio_dev->buffer, rxbuf, time_ns); diff --git a/drivers/staging/iio/adc/spear_adc.c b/drivers/staging/iio/adc/spear_adc.c new file mode 100644 index 00000000000..8c6013f0a4b --- /dev/null +++ b/drivers/staging/iio/adc/spear_adc.c @@ -0,0 +1,448 @@ +/* + * ST SPEAr ADC driver + * + * Copyright 2012 Stefan Roese <sr@denx.de> + * + * Licensed under the GPL-2. + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/device.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/io.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/completion.h> +#include <linux/of.h> +#include <linux/of_address.h> + +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> + +/* + * SPEAR registers definitions + */ + +#define SCAN_RATE_LO(x) ((x) & 0xFFFF) +#define SCAN_RATE_HI(x) (((x) >> 0x10) & 0xFFFF) +#define CLK_LOW(x) (((x) & 0xf) << 0) +#define CLK_HIGH(x) (((x) & 0xf) << 4) + +/* Bit definitions for SPEAR_ADC_STATUS */ +#define START_CONVERSION (1 << 0) +#define CHANNEL_NUM(x) ((x) << 1) +#define ADC_ENABLE (1 << 4) +#define AVG_SAMPLE(x) ((x) << 5) +#define VREF_INTERNAL (1 << 9) + +#define DATA_MASK 0x03ff +#define DATA_BITS 10 + +#define MOD_NAME "spear-adc" + +#define ADC_CHANNEL_NUM 8 + +#define CLK_MIN 2500000 +#define CLK_MAX 20000000 + +struct adc_regs_spear3xx { + u32 status; + u32 average; + u32 scan_rate; + u32 clk; /* Not avail for 1340 & 1310 */ + u32 ch_ctrl[ADC_CHANNEL_NUM]; + u32 ch_data[ADC_CHANNEL_NUM]; +}; + +struct chan_data { + u32 lsb; + u32 msb; +}; + +struct adc_regs_spear6xx { + u32 status; + u32 pad[2]; + u32 clk; + u32 ch_ctrl[ADC_CHANNEL_NUM]; + struct chan_data ch_data[ADC_CHANNEL_NUM]; + u32 scan_rate_lo; + u32 scan_rate_hi; + struct chan_data average; +}; + +struct spear_adc_info { + struct device_node *np; + struct adc_regs_spear3xx __iomem *adc_base_spear3xx; + struct adc_regs_spear6xx __iomem *adc_base_spear6xx; + struct clk *clk; + struct completion completion; + u32 current_clk; + u32 sampling_freq; + u32 avg_samples; + u32 vref_external; + u32 value; +}; + +/* + * Functions to access some SPEAr ADC register. Abstracted into + * static inline functions, because of different register offsets + * on different SoC variants (SPEAr300 vs SPEAr600 etc). + */ +static void spear_adc_set_status(struct spear_adc_info *info, u32 val) +{ + __raw_writel(val, &info->adc_base_spear6xx->status); +} + +static void spear_adc_set_clk(struct spear_adc_info *info, u32 val) +{ + u32 clk_high, clk_low, count; + u32 apb_clk = clk_get_rate(info->clk); + + count = (apb_clk + val - 1) / val; + clk_low = count / 2; + clk_high = count - clk_low; + info->current_clk = apb_clk / count; + + __raw_writel(CLK_LOW(clk_low) | CLK_HIGH(clk_high), + &info->adc_base_spear6xx->clk); +} + +static void spear_adc_set_ctrl(struct spear_adc_info *info, int n, + u32 val) +{ + __raw_writel(val, &info->adc_base_spear6xx->ch_ctrl[n]); +} + +static u32 spear_adc_get_average(struct spear_adc_info *info) +{ + if (of_device_is_compatible(info->np, "st,spear600-adc")) { + return __raw_readl(&info->adc_base_spear6xx->average.msb) & + DATA_MASK; + } else { + return __raw_readl(&info->adc_base_spear3xx->average) & + DATA_MASK; + } +} + +static void spear_adc_set_scanrate(struct spear_adc_info *info, u32 rate) +{ + if (of_device_is_compatible(info->np, "st,spear600-adc")) { + __raw_writel(SCAN_RATE_LO(rate), + &info->adc_base_spear6xx->scan_rate_lo); + __raw_writel(SCAN_RATE_HI(rate), + &info->adc_base_spear6xx->scan_rate_hi); + } else { + __raw_writel(rate, &info->adc_base_spear3xx->scan_rate); + } +} + +static int spear_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, + int *val2, + long mask) +{ + struct spear_adc_info *info = iio_priv(indio_dev); + u32 scale_mv; + u32 status; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + mutex_lock(&indio_dev->mlock); + + status = CHANNEL_NUM(chan->channel) | + AVG_SAMPLE(info->avg_samples) | + START_CONVERSION | ADC_ENABLE; + if (info->vref_external == 0) + status |= VREF_INTERNAL; + + spear_adc_set_status(info, status); + wait_for_completion(&info->completion); /* set by ISR */ + *val = info->value; + + mutex_unlock(&indio_dev->mlock); + + return IIO_VAL_INT; + + case IIO_CHAN_INFO_SCALE: + scale_mv = (info->vref_external * 1000) >> DATA_BITS; + *val = scale_mv / 1000; + *val2 = (scale_mv % 1000) * 1000; + return IIO_VAL_INT_PLUS_MICRO; + } + + return -EINVAL; +} + +#define SPEAR_ADC_CHAN(idx) { \ + .type = IIO_VOLTAGE, \ + .indexed = 1, \ + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \ + IIO_CHAN_INFO_SCALE_SHARED_BIT, \ + .channel = idx, \ + .scan_type = { \ + .sign = 'u', \ + .storagebits = 16, \ + }, \ +} + +static struct iio_chan_spec spear_adc_iio_channels[] = { + SPEAR_ADC_CHAN(0), + SPEAR_ADC_CHAN(1), + SPEAR_ADC_CHAN(2), + SPEAR_ADC_CHAN(3), + SPEAR_ADC_CHAN(4), + SPEAR_ADC_CHAN(5), + SPEAR_ADC_CHAN(6), + SPEAR_ADC_CHAN(7), +}; + +static irqreturn_t spear_adc_isr(int irq, void *dev_id) +{ + struct spear_adc_info *info = (struct spear_adc_info *)dev_id; + + /* Read value to clear IRQ */ + info->value = spear_adc_get_average(info); + complete(&info->completion); + + return IRQ_HANDLED; +} + +static int spear_adc_configure(struct spear_adc_info *info) +{ + int i; + + /* Reset ADC core */ + spear_adc_set_status(info, 0); + __raw_writel(0, &info->adc_base_spear6xx->clk); + for (i = 0; i < 8; i++) + spear_adc_set_ctrl(info, i, 0); + spear_adc_set_scanrate(info, 0); + + spear_adc_set_clk(info, info->sampling_freq); + + return 0; +} + +static ssize_t spear_adc_read_frequency(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct spear_adc_info *info = iio_priv(indio_dev); + + return sprintf(buf, "%d\n", info->current_clk); +} + +static ssize_t spear_adc_write_frequency(struct device *dev, + struct device_attribute *attr, + const char *buf, + size_t len) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct spear_adc_info *info = iio_priv(indio_dev); + u32 clk_high, clk_low, count; + u32 apb_clk = clk_get_rate(info->clk); + unsigned long lval; + int ret; + + ret = kstrtoul(buf, 10, &lval); + if (ret) + return ret; + + mutex_lock(&indio_dev->mlock); + + if ((lval < CLK_MIN) || (lval > CLK_MAX)) { + ret = -EINVAL; + goto out; + } + + count = (apb_clk + lval - 1) / lval; + clk_low = count / 2; + clk_high = count - clk_low; + info->current_clk = apb_clk / count; + spear_adc_set_clk(info, lval); + +out: + mutex_unlock(&indio_dev->mlock); + + return ret ? ret : len; +} + +static IIO_DEV_ATTR_SAMP_FREQ(S_IWUSR | S_IRUGO, + spear_adc_read_frequency, + spear_adc_write_frequency); + +static struct attribute *spear_attributes[] = { + &iio_dev_attr_sampling_frequency.dev_attr.attr, + NULL +}; + +static const struct attribute_group spear_attribute_group = { + .attrs = spear_attributes, +}; + +static const struct iio_info spear_adc_iio_info = { + .read_raw = &spear_read_raw, + .attrs = &spear_attribute_group, + .driver_module = THIS_MODULE, +}; + +static int __devinit spear_adc_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct device *dev = &pdev->dev; + struct spear_adc_info *info; + struct iio_dev *iodev = NULL; + int ret = -ENODEV; + int irq; + + iodev = iio_device_alloc(sizeof(struct spear_adc_info)); + if (!iodev) { + dev_err(dev, "failed allocating iio device\n"); + ret = -ENOMEM; + goto errout1; + } + + info = iio_priv(iodev); + info->np = np; + + /* + * SPEAr600 has a different register layout than other SPEAr SoC's + * (e.g. SPEAr3xx). Let's provide two register base addresses + * to support multi-arch kernels. + */ + info->adc_base_spear6xx = of_iomap(np, 0); + if (!info->adc_base_spear6xx) { + dev_err(dev, "failed mapping memory\n"); + ret = -ENOMEM; + goto errout2; + } + info->adc_base_spear3xx = + (struct adc_regs_spear3xx *)info->adc_base_spear6xx; + + info->clk = clk_get(dev, NULL); + if (IS_ERR(info->clk)) { + dev_err(dev, "failed getting clock\n"); + goto errout3; + } + + ret = clk_prepare(info->clk); + if (ret) { + dev_err(dev, "failed preparing clock\n"); + goto errout4; + } + + ret = clk_enable(info->clk); + if (ret) { + dev_err(dev, "failed enabling clock\n"); + goto errout5; + } + + irq = platform_get_irq(pdev, 0); + if ((irq < 0) || (irq >= NR_IRQS)) { + dev_err(dev, "failed getting interrupt resource\n"); + ret = -EINVAL; + goto errout6; + } + + ret = devm_request_irq(dev, irq, spear_adc_isr, 0, MOD_NAME, info); + if (ret < 0) { + dev_err(dev, "failed requesting interrupt\n"); + goto errout6; + } + + if (of_property_read_u32(np, "sampling-frequency", + &info->sampling_freq)) { + dev_err(dev, "sampling-frequency missing in DT\n"); + ret = -EINVAL; + goto errout6; + } + + /* + * Optional avg_samples defaults to 0, resulting in single data + * conversion + */ + of_property_read_u32(np, "average-samples", &info->avg_samples); + + /* + * Optional vref_external defaults to 0, resulting in internal vref + * selection + */ + of_property_read_u32(np, "vref-external", &info->vref_external); + + spear_adc_configure(info); + + platform_set_drvdata(pdev, iodev); + + init_completion(&info->completion); + + iodev->name = MOD_NAME; + iodev->dev.parent = dev; + iodev->info = &spear_adc_iio_info; + iodev->modes = INDIO_DIRECT_MODE; + iodev->channels = spear_adc_iio_channels; + iodev->num_channels = ARRAY_SIZE(spear_adc_iio_channels); + + ret = iio_device_register(iodev); + if (ret) + goto errout6; + + dev_info(dev, "SPEAR ADC driver loaded, IRQ %d\n", irq); + + return 0; + +errout6: + clk_disable(info->clk); +errout5: + clk_unprepare(info->clk); +errout4: + clk_put(info->clk); +errout3: + iounmap(info->adc_base_spear6xx); +errout2: + iio_device_free(iodev); +errout1: + return ret; +} + +static int __devexit spear_adc_remove(struct platform_device *pdev) +{ + struct iio_dev *iodev = platform_get_drvdata(pdev); + struct spear_adc_info *info = iio_priv(iodev); + + iio_device_unregister(iodev); + platform_set_drvdata(pdev, NULL); + clk_disable(info->clk); + clk_unprepare(info->clk); + clk_put(info->clk); + iounmap(info->adc_base_spear6xx); + iio_device_free(iodev); + + return 0; +} + +static const struct of_device_id spear_adc_dt_ids[] = { + { .compatible = "st,spear600-adc", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, spear_adc_dt_ids); + +static struct platform_driver spear_adc_driver = { + .probe = spear_adc_probe, + .remove = __devexit_p(spear_adc_remove), + .driver = { + .name = MOD_NAME, + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(spear_adc_dt_ids), + }, +}; + +module_platform_driver(spear_adc_driver); + +MODULE_AUTHOR("Stefan Roese <sr@denx.de>"); +MODULE_DESCRIPTION("SPEAr ADC driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/staging/iio/addac/adt7316.c b/drivers/staging/iio/addac/adt7316.c index fd6a4544405..5aba804237c 100644 --- a/drivers/staging/iio/addac/adt7316.c +++ b/drivers/staging/iio/addac/adt7316.c @@ -19,9 +19,9 @@ #include <linux/rtc.h> #include <linux/module.h> -#include "../iio.h" -#include "../events.h" -#include "../sysfs.h" +#include <linux/iio/iio.h> +#include <linux/iio/events.h> +#include <linux/iio/sysfs.h> #include "adt7316.h" /* @@ -2133,7 +2133,7 @@ int __devinit adt7316_probe(struct device *dev, struct adt7316_bus *bus, unsigned short *adt7316_platform_data = dev->platform_data; int ret = 0; - indio_dev = iio_allocate_device(sizeof(*chip)); + indio_dev = iio_device_alloc(sizeof(*chip)); if (indio_dev == NULL) { ret = -ENOMEM; goto error_ret; @@ -2210,7 +2210,7 @@ int __devinit adt7316_probe(struct device *dev, struct adt7316_bus *bus, error_unreg_irq: free_irq(chip->bus.irq, indio_dev); error_free_dev: - iio_free_device(indio_dev); + iio_device_free(indio_dev); error_ret: return ret; } @@ -2224,7 +2224,7 @@ int __devexit adt7316_remove(struct device *dev) iio_device_unregister(indio_dev); if (chip->bus.irq) free_irq(chip->bus.irq, indio_dev); - iio_free_device(indio_dev); + iio_device_free(indio_dev); return 0; } diff --git a/drivers/staging/iio/buffer.h b/drivers/staging/iio/buffer.h deleted file mode 100644 index df2046dcb62..00000000000 --- a/drivers/staging/iio/buffer.h +++ /dev/null @@ -1,193 +0,0 @@ -/* The industrial I/O core - generic buffer interfaces. - * - * Copyright (c) 2008 Jonathan Cameron - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ - -#ifndef _IIO_BUFFER_GENERIC_H_ -#define _IIO_BUFFER_GENERIC_H_ -#include <linux/sysfs.h> -#include "iio.h" - -#ifdef CONFIG_IIO_BUFFER - -struct iio_buffer; - -/** - * struct iio_buffer_access_funcs - access functions for buffers. - * @store_to: actually store stuff to the buffer - * @read_first_n: try to get a specified number of bytes (must exist) - * @request_update: if a parameter change has been marked, update underlying - * storage. - * @get_bytes_per_datum:get current bytes per datum - * @set_bytes_per_datum:set number of bytes per datum - * @get_length: get number of datums in buffer - * @set_length: set number of datums in buffer - * - * The purpose of this structure is to make the buffer element - * modular as event for a given driver, different usecases may require - * different buffer designs (space efficiency vs speed for example). - * - * It is worth noting that a given buffer implementation may only support a - * small proportion of these functions. The core code 'should' cope fine with - * any of them not existing. - **/ -struct iio_buffer_access_funcs { - int (*store_to)(struct iio_buffer *buffer, u8 *data, s64 timestamp); - int (*read_first_n)(struct iio_buffer *buffer, - size_t n, - char __user *buf); - - int (*request_update)(struct iio_buffer *buffer); - - int (*get_bytes_per_datum)(struct iio_buffer *buffer); - int (*set_bytes_per_datum)(struct iio_buffer *buffer, size_t bpd); - int (*get_length)(struct iio_buffer *buffer); - int (*set_length)(struct iio_buffer *buffer, int length); -}; - -/** - * struct iio_buffer - general buffer structure - * @length: [DEVICE] number of datums in buffer - * @bytes_per_datum: [DEVICE] size of individual datum including timestamp - * @scan_el_attrs: [DRIVER] control of scan elements if that scan mode - * control method is used - * @scan_mask: [INTERN] bitmask used in masking scan mode elements - * @scan_index_timestamp:[INTERN] cache of the index to the timestamp - * @scan_timestamp: [INTERN] does the scan mode include a timestamp - * @access: [DRIVER] buffer access functions associated with the - * implementation. - * @scan_el_dev_attr_list:[INTERN] list of scan element related attributes. - * @scan_el_group: [DRIVER] attribute group for those attributes not - * created from the iio_chan_info array. - * @pollq: [INTERN] wait queue to allow for polling on the buffer. - * @stufftoread: [INTERN] flag to indicate new data. - * @demux_list: [INTERN] list of operations required to demux the scan. - * @demux_bounce: [INTERN] buffer for doing gather from incoming scan. - **/ -struct iio_buffer { - int length; - int bytes_per_datum; - struct attribute_group *scan_el_attrs; - long *scan_mask; - bool scan_timestamp; - unsigned scan_index_timestamp; - const struct iio_buffer_access_funcs *access; - struct list_head scan_el_dev_attr_list; - struct attribute_group scan_el_group; - wait_queue_head_t pollq; - bool stufftoread; - const struct attribute_group *attrs; - struct list_head demux_list; - unsigned char *demux_bounce; -}; - -/** - * iio_buffer_init() - Initialize the buffer structure - * @buffer: buffer to be initialized - **/ -void iio_buffer_init(struct iio_buffer *buffer); - -/** - * __iio_update_buffer() - update common elements of buffers - * @buffer: buffer that is the event source - * @bytes_per_datum: size of individual datum including timestamp - * @length: number of datums in buffer - **/ -static inline void __iio_update_buffer(struct iio_buffer *buffer, - int bytes_per_datum, int length) -{ - buffer->bytes_per_datum = bytes_per_datum; - buffer->length = length; -} - -int iio_scan_mask_query(struct iio_dev *indio_dev, - struct iio_buffer *buffer, int bit); - -/** - * iio_scan_mask_set() - set particular bit in the scan mask - * @buffer: the buffer whose scan mask we are interested in - * @bit: the bit to be set. - **/ -int iio_scan_mask_set(struct iio_dev *indio_dev, - struct iio_buffer *buffer, int bit); - -/** - * iio_push_to_buffer() - push to a registered buffer. - * @buffer: IIO buffer structure for device - * @scan: Full scan. - * @timestamp: - */ -int iio_push_to_buffer(struct iio_buffer *buffer, unsigned char *data, - s64 timestamp); - -int iio_update_demux(struct iio_dev *indio_dev); - -/** - * iio_buffer_register() - register the buffer with IIO core - * @indio_dev: device with the buffer to be registered - **/ -int iio_buffer_register(struct iio_dev *indio_dev, - const struct iio_chan_spec *channels, - int num_channels); - -/** - * iio_buffer_unregister() - unregister the buffer from IIO core - * @indio_dev: the device with the buffer to be unregistered - **/ -void iio_buffer_unregister(struct iio_dev *indio_dev); - -/** - * iio_buffer_read_length() - attr func to get number of datums in the buffer - **/ -ssize_t iio_buffer_read_length(struct device *dev, - struct device_attribute *attr, - char *buf); -/** - * iio_buffer_write_length() - attr func to set number of datums in the buffer - **/ -ssize_t iio_buffer_write_length(struct device *dev, - struct device_attribute *attr, - const char *buf, - size_t len); -/** - * iio_buffer_store_enable() - attr to turn the buffer on - **/ -ssize_t iio_buffer_store_enable(struct device *dev, - struct device_attribute *attr, - const char *buf, - size_t len); -/** - * iio_buffer_show_enable() - attr to see if the buffer is on - **/ -ssize_t iio_buffer_show_enable(struct device *dev, - struct device_attribute *attr, - char *buf); -#define IIO_BUFFER_LENGTH_ATTR DEVICE_ATTR(length, S_IRUGO | S_IWUSR, \ - iio_buffer_read_length, \ - iio_buffer_write_length) - -#define IIO_BUFFER_ENABLE_ATTR DEVICE_ATTR(enable, S_IRUGO | S_IWUSR, \ - iio_buffer_show_enable, \ - iio_buffer_store_enable) - -int iio_sw_buffer_preenable(struct iio_dev *indio_dev); - -#else /* CONFIG_IIO_BUFFER */ - -static inline int iio_buffer_register(struct iio_dev *indio_dev, - struct iio_chan_spec *channels, - int num_channels) -{ - return 0; -} - -static inline void iio_buffer_unregister(struct iio_dev *indio_dev) -{}; - -#endif /* CONFIG_IIO_BUFFER */ - -#endif /* _IIO_BUFFER_GENERIC_H_ */ diff --git a/drivers/staging/iio/cdc/ad7150.c b/drivers/staging/iio/cdc/ad7150.c index e4a08dc9b6f..14470764fa0 100644 --- a/drivers/staging/iio/cdc/ad7150.c +++ b/drivers/staging/iio/cdc/ad7150.c @@ -13,9 +13,9 @@ #include <linux/i2c.h> #include <linux/module.h> -#include "../iio.h" -#include "../sysfs.h" -#include "../events.h" +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/events.h> /* * AD7150 registers definition */ @@ -104,7 +104,7 @@ static int ad7150_read_raw(struct iio_dev *indio_dev, struct ad7150_chip_info *chip = iio_priv(indio_dev); switch (mask) { - case 0: + case IIO_CHAN_INFO_RAW: ret = i2c_smbus_read_word_data(chip->client, ad7150_addresses[chan->channel][0]); if (ret < 0) @@ -429,7 +429,8 @@ static const struct iio_chan_spec ad7150_channels[] = { .type = IIO_CAPACITANCE, .indexed = 1, .channel = 0, - .info_mask = IIO_CHAN_INFO_AVERAGE_RAW_SEPARATE_BIT, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_AVERAGE_RAW_SEPARATE_BIT, .event_mask = IIO_EV_BIT(IIO_EV_TYPE_THRESH, IIO_EV_DIR_RISING) | IIO_EV_BIT(IIO_EV_TYPE_THRESH, IIO_EV_DIR_FALLING) | @@ -441,7 +442,8 @@ static const struct iio_chan_spec ad7150_channels[] = { .type = IIO_CAPACITANCE, .indexed = 1, .channel = 1, - .info_mask = IIO_CHAN_INFO_AVERAGE_RAW_SEPARATE_BIT, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_AVERAGE_RAW_SEPARATE_BIT, .event_mask = IIO_EV_BIT(IIO_EV_TYPE_THRESH, IIO_EV_DIR_RISING) | IIO_EV_BIT(IIO_EV_TYPE_THRESH, IIO_EV_DIR_FALLING) | @@ -556,7 +558,7 @@ static int __devinit ad7150_probe(struct i2c_client *client, struct ad7150_chip_info *chip; struct iio_dev *indio_dev; - indio_dev = iio_allocate_device(sizeof(*chip)); + indio_dev = iio_device_alloc(sizeof(*chip)); if (indio_dev == NULL) { ret = -ENOMEM; goto error_ret; @@ -619,7 +621,7 @@ error_free_irq: if (client->irq) free_irq(client->irq, indio_dev); error_free_dev: - iio_free_device(indio_dev); + iio_device_free(indio_dev); error_ret: return ret; } @@ -635,7 +637,7 @@ static int __devexit ad7150_remove(struct i2c_client *client) if (client->dev.platform_data) free_irq(*(unsigned int *)client->dev.platform_data, indio_dev); - iio_free_device(indio_dev); + iio_device_free(indio_dev); return 0; } diff --git a/drivers/staging/iio/cdc/ad7152.c b/drivers/staging/iio/cdc/ad7152.c index fdb83c35e6d..195d9074863 100644 --- a/drivers/staging/iio/cdc/ad7152.c +++ b/drivers/staging/iio/cdc/ad7152.c @@ -15,8 +15,8 @@ #include <linux/module.h> #include <linux/delay.h> -#include "../iio.h" -#include "../sysfs.h" +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> /* * TODO: Check compliance of calibbias with abi (units) @@ -329,7 +329,7 @@ static int ad7152_read_raw(struct iio_dev *indio_dev, mutex_lock(&indio_dev->mlock); switch (mask) { - case 0: + case IIO_CHAN_INFO_RAW: /* First set whether in differential mode */ regval = chip->setup[chan->channel]; @@ -436,7 +436,8 @@ static const struct iio_chan_spec ad7152_channels[] = { .type = IIO_CAPACITANCE, .indexed = 1, .channel = 0, - .info_mask = IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT | + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT | IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT | IIO_CHAN_INFO_SCALE_SEPARATE_BIT, }, { @@ -445,14 +446,16 @@ static const struct iio_chan_spec ad7152_channels[] = { .indexed = 1, .channel = 0, .channel2 = 2, - .info_mask = IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT | + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT | IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT | IIO_CHAN_INFO_SCALE_SEPARATE_BIT, }, { .type = IIO_CAPACITANCE, .indexed = 1, .channel = 1, - .info_mask = IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT | + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT | IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT | IIO_CHAN_INFO_SCALE_SEPARATE_BIT, }, { @@ -461,7 +464,8 @@ static const struct iio_chan_spec ad7152_channels[] = { .indexed = 1, .channel = 1, .channel2 = 3, - .info_mask = IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT | + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT | IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT | IIO_CHAN_INFO_SCALE_SEPARATE_BIT, } @@ -477,7 +481,7 @@ static int __devinit ad7152_probe(struct i2c_client *client, struct ad7152_chip_info *chip; struct iio_dev *indio_dev; - indio_dev = iio_allocate_device(sizeof(*chip)); + indio_dev = iio_device_alloc(sizeof(*chip)); if (indio_dev == NULL) { ret = -ENOMEM; goto error_ret; @@ -509,7 +513,7 @@ static int __devinit ad7152_probe(struct i2c_client *client, return 0; error_free_dev: - iio_free_device(indio_dev); + iio_device_free(indio_dev); error_ret: return ret; } @@ -519,7 +523,7 @@ static int __devexit ad7152_remove(struct i2c_client *client) struct iio_dev *indio_dev = i2c_get_clientdata(client); iio_device_unregister(indio_dev); - iio_free_device(indio_dev); + iio_device_free(indio_dev); return 0; } diff --git a/drivers/staging/iio/cdc/ad7746.c b/drivers/staging/iio/cdc/ad7746.c index 40b8512cbc3..e936831d5c9 100644 --- a/drivers/staging/iio/cdc/ad7746.c +++ b/drivers/staging/iio/cdc/ad7746.c @@ -16,8 +16,8 @@ #include <linux/module.h> #include <linux/stat.h> -#include "../iio.h" -#include "../sysfs.h" +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> #include "ad7746.h" @@ -123,7 +123,8 @@ static const struct iio_chan_spec ad7746_channels[] = { .type = IIO_VOLTAGE, .indexed = 1, .channel = 0, - .info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_SCALE_SHARED_BIT, .address = AD7746_REG_VT_DATA_HIGH << 8 | AD7746_VTSETUP_VTMD_EXT_VIN, }, @@ -132,7 +133,8 @@ static const struct iio_chan_spec ad7746_channels[] = { .indexed = 1, .channel = 1, .extend_name = "supply", - .info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_SCALE_SHARED_BIT, .address = AD7746_REG_VT_DATA_HIGH << 8 | AD7746_VTSETUP_VTMD_VDD_MON, }, @@ -140,7 +142,7 @@ static const struct iio_chan_spec ad7746_channels[] = { .type = IIO_TEMP, .indexed = 1, .channel = 0, - .processed_val = IIO_PROCESSED, + .info_mask = IIO_CHAN_INFO_PROCESSED_SEPARATE_BIT, .address = AD7746_REG_VT_DATA_HIGH << 8 | AD7746_VTSETUP_VTMD_INT_TEMP, }, @@ -148,7 +150,7 @@ static const struct iio_chan_spec ad7746_channels[] = { .type = IIO_TEMP, .indexed = 1, .channel = 1, - .processed_val = IIO_PROCESSED, + .info_mask = IIO_CHAN_INFO_PROCESSED_SEPARATE_BIT, .address = AD7746_REG_VT_DATA_HIGH << 8 | AD7746_VTSETUP_VTMD_EXT_TEMP, }, @@ -156,7 +158,8 @@ static const struct iio_chan_spec ad7746_channels[] = { .type = IIO_CAPACITANCE, .indexed = 1, .channel = 0, - .info_mask = IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT | + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT | IIO_CHAN_INFO_CALIBBIAS_SHARED_BIT | IIO_CHAN_INFO_OFFSET_SEPARATE_BIT | IIO_CHAN_INFO_SCALE_SHARED_BIT, @@ -168,7 +171,8 @@ static const struct iio_chan_spec ad7746_channels[] = { .indexed = 1, .channel = 0, .channel2 = 2, - .info_mask = IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT | + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT | IIO_CHAN_INFO_CALIBBIAS_SHARED_BIT | IIO_CHAN_INFO_OFFSET_SEPARATE_BIT | IIO_CHAN_INFO_SCALE_SHARED_BIT, @@ -179,7 +183,8 @@ static const struct iio_chan_spec ad7746_channels[] = { .type = IIO_CAPACITANCE, .indexed = 1, .channel = 1, - .info_mask = IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT | + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT | IIO_CHAN_INFO_CALIBBIAS_SHARED_BIT | IIO_CHAN_INFO_OFFSET_SEPARATE_BIT | IIO_CHAN_INFO_SCALE_SHARED_BIT, @@ -192,7 +197,8 @@ static const struct iio_chan_spec ad7746_channels[] = { .indexed = 1, .channel = 1, .channel2 = 3, - .info_mask = IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT | + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT | IIO_CHAN_INFO_CALIBBIAS_SHARED_BIT | IIO_CHAN_INFO_OFFSET_SEPARATE_BIT | IIO_CHAN_INFO_SCALE_SHARED_BIT, @@ -572,7 +578,8 @@ static int ad7746_read_raw(struct iio_dev *indio_dev, mutex_lock(&indio_dev->mlock); switch (mask) { - case 0: + case IIO_CHAN_INFO_RAW: + case IIO_CHAN_INFO_PROCESSED: ret = ad7746_select_channel(indio_dev, chan); if (ret < 0) goto out; @@ -696,7 +703,7 @@ static int __devinit ad7746_probe(struct i2c_client *client, int ret = 0; unsigned char regval = 0; - indio_dev = iio_allocate_device(sizeof(*chip)); + indio_dev = iio_device_alloc(sizeof(*chip)); if (indio_dev == NULL) { ret = -ENOMEM; goto error_ret; @@ -756,7 +763,7 @@ static int __devinit ad7746_probe(struct i2c_client *client, return 0; error_free_dev: - iio_free_device(indio_dev); + iio_device_free(indio_dev); error_ret: return ret; } @@ -766,7 +773,7 @@ static int __devexit ad7746_remove(struct i2c_client *client) struct iio_dev *indio_dev = i2c_get_clientdata(client); iio_device_unregister(indio_dev); - iio_free_device(indio_dev); + iio_device_free(indio_dev); return 0; } diff --git a/drivers/staging/iio/consumer.h b/drivers/staging/iio/consumer.h deleted file mode 100644 index 36a060cd3a2..00000000000 --- a/drivers/staging/iio/consumer.h +++ /dev/null @@ -1,96 +0,0 @@ -/* - * Industrial I/O in kernel consumer interface - * - * Copyright (c) 2011 Jonathan Cameron - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ -#ifndef _IIO_INKERN_CONSUMER_H_ -#define _IIO_INKERN_CONSUMER_H -#include "types.h" - -struct iio_dev; -struct iio_chan_spec; - -/** - * struct iio_channel - everything needed for a consumer to use a channel - * @indio_dev: Device on which the channel exists. - * @channel: Full description of the channel. - */ -struct iio_channel { - struct iio_dev *indio_dev; - const struct iio_chan_spec *channel; -}; - -/** - * iio_channel_get() - get description of all that is needed to access channel. - * @name: Unique name of the device as provided in the iio_map - * with which the desired provider to consumer mapping - * was registered. - * @consumer_channel: Unique name to identify the channel on the consumer - * side. This typically describes the channels use within - * the consumer. E.g. 'battery_voltage' - */ -struct iio_channel *iio_st_channel_get(const char *name, - const char *consumer_channel); - -/** - * iio_st_channel_release() - release channels obtained via iio_st_channel_get - * @chan: The channel to be released. - */ -void iio_st_channel_release(struct iio_channel *chan); - -/** - * iio_st_channel_get_all() - get all channels associated with a client - * @name: name of consumer device. - * - * Returns an array of iio_channel structures terminated with one with - * null iio_dev pointer. - * This function is used by fairly generic consumers to get all the - * channels registered as having this consumer. - */ -struct iio_channel *iio_st_channel_get_all(const char *name); - -/** - * iio_st_channel_release_all() - reverse iio_st_get_all - * @chan: Array of channels to be released. - */ -void iio_st_channel_release_all(struct iio_channel *chan); - -/** - * iio_st_read_channel_raw() - read from a given channel - * @channel: The channel being queried. - * @val: Value read back. - * - * Note raw reads from iio channels are in adc counts and hence - * scale will need to be applied if standard units required. - */ -int iio_st_read_channel_raw(struct iio_channel *chan, - int *val); - -/** - * iio_st_get_channel_type() - get the type of a channel - * @channel: The channel being queried. - * @type: The type of the channel. - * - * returns the enum iio_chan_type of the channel - */ -int iio_st_get_channel_type(struct iio_channel *channel, - enum iio_chan_type *type); - -/** - * iio_st_read_channel_scale() - read the scale value for a channel - * @channel: The channel being queried. - * @val: First part of value read back. - * @val2: Second part of value read back. - * - * Note returns a description of what is in val and val2, such - * as IIO_VAL_INT_PLUS_MICRO telling us we have a value of val - * + val2/1e6 - */ -int iio_st_read_channel_scale(struct iio_channel *chan, int *val, - int *val2); - -#endif diff --git a/drivers/staging/iio/dac/Kconfig b/drivers/staging/iio/dac/Kconfig index a57803a5d1a..a626f03871e 100644 --- a/drivers/staging/iio/dac/Kconfig +++ b/drivers/staging/iio/dac/Kconfig @@ -56,12 +56,12 @@ config AD5624R_SPI AD5664R converters (DAC). This driver uses the common SPI interface. config AD5446 - tristate "Analog Devices AD5444/6, AD5620/40/60 and AD5542A/12A DAC SPI driver" + tristate "Analog Devices AD5446 and similar single channel DACs driver" depends on SPI help Say yes here to build support for Analog Devices AD5444, AD5446, - AD5512A, AD5542A, AD5543, AD5553, AD5601, AD5611, AD5620, AD5621, - AD5640, AD5660, AD5662 DACs. + AD5512A, AD5541A, AD5542A, AD5543, AD5553, AD5601, AD5611, AD5620, + AD5621, AD5640, AD5660, AD5662 DACs. To compile this driver as a module, choose M here: the module will be called ad5446. diff --git a/drivers/staging/iio/dac/ad5064.c b/drivers/staging/iio/dac/ad5064.c index 06b162745a3..047148aa66b 100644 --- a/drivers/staging/iio/dac/ad5064.c +++ b/drivers/staging/iio/dac/ad5064.c @@ -16,8 +16,8 @@ #include <linux/sysfs.h> #include <linux/regulator/consumer.h> -#include "../iio.h" -#include "../sysfs.h" +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> #include "dac.h" #define AD5064_MAX_DAC_CHANNELS 8 @@ -144,14 +144,14 @@ static const char ad5064_powerdown_modes[][15] = { }; static ssize_t ad5064_read_powerdown_mode_available(struct iio_dev *indio_dev, - const struct iio_chan_spec *chan, char *buf) + uintptr_t private, const struct iio_chan_spec *chan, char *buf) { return sprintf(buf, "%s %s %s\n", ad5064_powerdown_modes[1], ad5064_powerdown_modes[2], ad5064_powerdown_modes[3]); } static ssize_t ad5064_read_powerdown_mode(struct iio_dev *indio_dev, - const struct iio_chan_spec *chan, char *buf) + uintptr_t private, const struct iio_chan_spec *chan, char *buf) { struct ad5064_state *st = iio_priv(indio_dev); @@ -160,7 +160,8 @@ static ssize_t ad5064_read_powerdown_mode(struct iio_dev *indio_dev, } static ssize_t ad5064_write_powerdown_mode(struct iio_dev *indio_dev, - const struct iio_chan_spec *chan, const char *buf, size_t len) + uintptr_t private, const struct iio_chan_spec *chan, const char *buf, + size_t len) { struct ad5064_state *st = iio_priv(indio_dev); unsigned int mode, i; @@ -187,7 +188,7 @@ static ssize_t ad5064_write_powerdown_mode(struct iio_dev *indio_dev, } static ssize_t ad5064_read_dac_powerdown(struct iio_dev *indio_dev, - const struct iio_chan_spec *chan, char *buf) + uintptr_t private, const struct iio_chan_spec *chan, char *buf) { struct ad5064_state *st = iio_priv(indio_dev); @@ -195,7 +196,8 @@ static ssize_t ad5064_read_dac_powerdown(struct iio_dev *indio_dev, } static ssize_t ad5064_write_dac_powerdown(struct iio_dev *indio_dev, - const struct iio_chan_spec *chan, const char *buf, size_t len) + uintptr_t private, const struct iio_chan_spec *chan, const char *buf, + size_t len) { struct ad5064_state *st = iio_priv(indio_dev); bool pwr_down; @@ -235,7 +237,7 @@ static int ad5064_read_raw(struct iio_dev *indio_dev, int scale_uv; switch (m) { - case 0: + case IIO_CHAN_INFO_RAW: *val = st->dac_cache[chan->channel]; return IIO_VAL_INT; case IIO_CHAN_INFO_SCALE: @@ -260,7 +262,7 @@ static int ad5064_write_raw(struct iio_dev *indio_dev, int ret; switch (mask) { - case 0: + case IIO_CHAN_INFO_RAW: if (val > (1 << chan->scan_type.realbits) || val < 0) return -EINVAL; @@ -308,7 +310,8 @@ static struct iio_chan_spec_ext_info ad5064_ext_info[] = { .indexed = 1, \ .output = 1, \ .channel = (chan), \ - .info_mask = IIO_CHAN_INFO_SCALE_SEPARATE_BIT, \ + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \ + IIO_CHAN_INFO_SCALE_SEPARATE_BIT, \ .address = AD5064_ADDR_DAC(chan), \ .scan_type = IIO_ST('u', (bits), 16, 20 - (bits)), \ .ext_info = ad5064_ext_info, \ @@ -442,7 +445,7 @@ static int __devinit ad5064_probe(struct spi_device *spi) unsigned int i; int ret; - indio_dev = iio_allocate_device(sizeof(*st)); + indio_dev = iio_device_alloc(sizeof(*st)); if (indio_dev == NULL) return -ENOMEM; @@ -499,7 +502,7 @@ error_free_reg: if (!st->use_internal_vref) regulator_bulk_free(ad5064_num_vref(st), st->vref_reg); error_free: - iio_free_device(indio_dev); + iio_device_free(indio_dev); return ret; } @@ -517,7 +520,7 @@ static int __devexit ad5064_remove(struct spi_device *spi) regulator_bulk_free(ad5064_num_vref(st), st->vref_reg); } - iio_free_device(indio_dev); + iio_device_free(indio_dev); return 0; } diff --git a/drivers/staging/iio/dac/ad5360.c b/drivers/staging/iio/dac/ad5360.c index cec3693b50a..26cac42dcca 100644 --- a/drivers/staging/iio/dac/ad5360.c +++ b/drivers/staging/iio/dac/ad5360.c @@ -16,8 +16,8 @@ #include <linux/sysfs.h> #include <linux/regulator/consumer.h> -#include "../iio.h" -#include "../sysfs.h" +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> #include "dac.h" #define AD5360_CMD(x) ((x) << 22) @@ -103,7 +103,8 @@ enum ad5360_type { .type = IIO_VOLTAGE, \ .indexed = 1, \ .output = 1, \ - .info_mask = IIO_CHAN_INFO_SCALE_SEPARATE_BIT | \ + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \ + IIO_CHAN_INFO_SCALE_SEPARATE_BIT | \ IIO_CHAN_INFO_OFFSET_SEPARATE_BIT | \ IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT | \ IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT, \ @@ -319,7 +320,7 @@ static int ad5360_write_raw(struct iio_dev *indio_dev, unsigned int ofs_index; switch (mask) { - case 0: + case IIO_CHAN_INFO_RAW: if (val >= max_val || val < 0) return -EINVAL; @@ -376,7 +377,7 @@ static int ad5360_read_raw(struct iio_dev *indio_dev, int ret; switch (m) { - case 0: + case IIO_CHAN_INFO_RAW: ret = ad5360_read(indio_dev, AD5360_READBACK_X1A, chan->address); if (ret < 0) @@ -464,7 +465,7 @@ static int __devinit ad5360_probe(struct spi_device *spi) unsigned int i; int ret; - indio_dev = iio_allocate_device(sizeof(*st)); + indio_dev = iio_device_alloc(sizeof(*st)); if (indio_dev == NULL) { dev_err(&spi->dev, "Failed to allocate iio device\n"); return -ENOMEM; @@ -519,7 +520,7 @@ error_free_reg: error_free_channels: kfree(indio_dev->channels); error_free: - iio_free_device(indio_dev); + iio_device_free(indio_dev); return ret; } @@ -536,7 +537,7 @@ static int __devexit ad5360_remove(struct spi_device *spi) regulator_bulk_disable(st->chip_info->num_vrefs, st->vref_reg); regulator_bulk_free(st->chip_info->num_vrefs, st->vref_reg); - iio_free_device(indio_dev); + iio_device_free(indio_dev); return 0; } diff --git a/drivers/staging/iio/dac/ad5380.c b/drivers/staging/iio/dac/ad5380.c index 4c50716fa80..4afb099fa5d 100644 --- a/drivers/staging/iio/dac/ad5380.c +++ b/drivers/staging/iio/dac/ad5380.c @@ -18,8 +18,8 @@ #include <linux/regmap.h> #include <linux/regulator/consumer.h> -#include "../iio.h" -#include "../sysfs.h" +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> #include "dac.h" @@ -85,7 +85,8 @@ enum ad5380_type { .type = IIO_VOLTAGE, \ .indexed = 1, \ .output = 1, \ - .info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT | \ + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \ + IIO_CHAN_INFO_SCALE_SHARED_BIT | \ IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT | \ IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT, \ .scan_type = IIO_ST('u', (_bits), 16, 14 - (_bits)) \ @@ -292,7 +293,7 @@ static int ad5380_write_raw(struct iio_dev *indio_dev, struct ad5380_state *st = iio_priv(indio_dev); switch (info) { - case 0: + case IIO_CHAN_INFO_RAW: case IIO_CHAN_INFO_CALIBSCALE: if (val >= max_val || val < 0) return -EINVAL; @@ -322,7 +323,7 @@ static int ad5380_read_raw(struct iio_dev *indio_dev, int ret; switch (info) { - case 0: + case IIO_CHAN_INFO_RAW: case IIO_CHAN_INFO_CALIBSCALE: ret = regmap_read(st->regmap, ad5380_info_to_reg(chan, info), val); @@ -388,7 +389,7 @@ static int __devinit ad5380_probe(struct device *dev, struct regmap *regmap, unsigned int ctrl = 0; int ret; - indio_dev = iio_allocate_device(sizeof(*st)); + indio_dev = iio_device_alloc(sizeof(*st)); if (indio_dev == NULL) { dev_err(dev, "Failed to allocate iio device\n"); ret = -ENOMEM; @@ -454,7 +455,7 @@ error_free_reg: kfree(indio_dev->channels); error_free: - iio_free_device(indio_dev); + iio_device_free(indio_dev); error_regmap_exit: regmap_exit(regmap); @@ -476,7 +477,7 @@ static int __devexit ad5380_remove(struct device *dev) } regmap_exit(st->regmap); - iio_free_device(indio_dev); + iio_device_free(indio_dev); return 0; } diff --git a/drivers/staging/iio/dac/ad5421.c b/drivers/staging/iio/dac/ad5421.c index 0b040b20469..ffbd4c234f5 100644 --- a/drivers/staging/iio/dac/ad5421.c +++ b/drivers/staging/iio/dac/ad5421.c @@ -16,9 +16,9 @@ #include <linux/slab.h> #include <linux/sysfs.h> -#include "../iio.h" -#include "../sysfs.h" -#include "../events.h" +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/events.h> #include "dac.h" #include "ad5421.h" @@ -87,7 +87,8 @@ static const struct iio_chan_spec ad5421_channels[] = { .indexed = 1, .output = 1, .channel = 0, - .info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT | + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_SCALE_SHARED_BIT | IIO_CHAN_INFO_OFFSET_SHARED_BIT | IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT | IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT, @@ -304,7 +305,7 @@ static int ad5421_read_raw(struct iio_dev *indio_dev, return -EINVAL; switch (m) { - case 0: + case IIO_CHAN_INFO_RAW: ret = ad5421_read(indio_dev, AD5421_REG_DAC_DATA); if (ret < 0) return ret; @@ -340,7 +341,7 @@ static int ad5421_write_raw(struct iio_dev *indio_dev, const unsigned int max_val = 1 << 16; switch (mask) { - case 0: + case IIO_CHAN_INFO_RAW: if (val >= max_val || val < 0) return -EINVAL; @@ -456,7 +457,7 @@ static int __devinit ad5421_probe(struct spi_device *spi) struct ad5421_state *st; int ret; - indio_dev = iio_allocate_device(sizeof(*st)); + indio_dev = iio_device_alloc(sizeof(*st)); if (indio_dev == NULL) { dev_err(&spi->dev, "Failed to allocate iio device\n"); return -ENOMEM; @@ -511,7 +512,7 @@ error_free_irq: if (spi->irq) free_irq(spi->irq, indio_dev); error_free: - iio_free_device(indio_dev); + iio_device_free(indio_dev); return ret; } @@ -523,7 +524,7 @@ static int __devexit ad5421_remove(struct spi_device *spi) iio_device_unregister(indio_dev); if (spi->irq) free_irq(spi->irq, indio_dev); - iio_free_device(indio_dev); + iio_device_free(indio_dev); return 0; } diff --git a/drivers/staging/iio/dac/ad5446.c b/drivers/staging/iio/dac/ad5446.c index 633ffbb2181..daa65b384c1 100644 --- a/drivers/staging/iio/dac/ad5446.c +++ b/drivers/staging/iio/dac/ad5446.c @@ -18,229 +18,212 @@ #include <linux/err.h> #include <linux/module.h> -#include "../iio.h" -#include "../sysfs.h" +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> #include "dac.h" #include "ad5446.h" -static void ad5446_store_sample(struct ad5446_state *st, unsigned val) +static int ad5446_write(struct ad5446_state *st, unsigned val) { - st->data.d16 = cpu_to_be16(AD5446_LOAD | val); + __be16 data = cpu_to_be16(val); + return spi_write(st->spi, &data, sizeof(data)); } -static void ad5542_store_sample(struct ad5446_state *st, unsigned val) +static int ad5660_write(struct ad5446_state *st, unsigned val) { - st->data.d16 = cpu_to_be16(val); -} + uint8_t data[3]; -static void ad5620_store_sample(struct ad5446_state *st, unsigned val) -{ - st->data.d16 = cpu_to_be16(AD5620_LOAD | val); -} + data[0] = (val >> 16) & 0xFF; + data[1] = (val >> 8) & 0xFF; + data[2] = val & 0xFF; -static void ad5660_store_sample(struct ad5446_state *st, unsigned val) -{ - val |= AD5660_LOAD; - st->data.d24[0] = (val >> 16) & 0xFF; - st->data.d24[1] = (val >> 8) & 0xFF; - st->data.d24[2] = val & 0xFF; + return spi_write(st->spi, data, sizeof(data)); } -static void ad5620_store_pwr_down(struct ad5446_state *st, unsigned mode) -{ - st->data.d16 = cpu_to_be16(mode << 14); -} +static const char * const ad5446_powerdown_modes[] = { + "", "1kohm_to_gnd", "100kohm_to_gnd", "three_state" +}; -static void ad5660_store_pwr_down(struct ad5446_state *st, unsigned mode) +static ssize_t ad5446_read_powerdown_mode_available(struct iio_dev *indio_dev, + uintptr_t private, const struct iio_chan_spec *chan, char *buf) { - unsigned val = mode << 16; - - st->data.d24[0] = (val >> 16) & 0xFF; - st->data.d24[1] = (val >> 8) & 0xFF; - st->data.d24[2] = val & 0xFF; + return sprintf(buf, "%s %s %s\n", ad5446_powerdown_modes[1], + ad5446_powerdown_modes[2], ad5446_powerdown_modes[3]); } -static ssize_t ad5446_write_powerdown_mode(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t len) +static ssize_t ad5446_write_powerdown_mode(struct iio_dev *indio_dev, + uintptr_t private, + const struct iio_chan_spec *chan, + const char *buf, size_t len) { - struct iio_dev *indio_dev = dev_get_drvdata(dev); struct ad5446_state *st = iio_priv(indio_dev); + int i; - if (sysfs_streq(buf, "1kohm_to_gnd")) - st->pwr_down_mode = MODE_PWRDWN_1k; - else if (sysfs_streq(buf, "100kohm_to_gnd")) - st->pwr_down_mode = MODE_PWRDWN_100k; - else if (sysfs_streq(buf, "three_state")) - st->pwr_down_mode = MODE_PWRDWN_TRISTATE; - else + for (i = 1; i < ARRAY_SIZE(ad5446_powerdown_modes); i++) { + if (sysfs_streq(buf, ad5446_powerdown_modes[i])) { + st->pwr_down_mode = i; + break; + } + } + + if (i == ARRAY_SIZE(ad5446_powerdown_modes)) return -EINVAL; return len; } -static ssize_t ad5446_read_powerdown_mode(struct device *dev, - struct device_attribute *attr, char *buf) +static ssize_t ad5446_read_powerdown_mode(struct iio_dev *indio_dev, + uintptr_t private, + const struct iio_chan_spec *chan, + char *buf) { - struct iio_dev *indio_dev = dev_get_drvdata(dev); struct ad5446_state *st = iio_priv(indio_dev); - char mode[][15] = {"", "1kohm_to_gnd", "100kohm_to_gnd", "three_state"}; - - return sprintf(buf, "%s\n", mode[st->pwr_down_mode]); + return sprintf(buf, "%s\n", ad5446_powerdown_modes[st->pwr_down_mode]); } -static ssize_t ad5446_read_dac_powerdown(struct device *dev, - struct device_attribute *attr, +static ssize_t ad5446_read_dac_powerdown(struct iio_dev *indio_dev, + uintptr_t private, + const struct iio_chan_spec *chan, char *buf) { - struct iio_dev *indio_dev = dev_get_drvdata(dev); struct ad5446_state *st = iio_priv(indio_dev); return sprintf(buf, "%d\n", st->pwr_down); } -static ssize_t ad5446_write_dac_powerdown(struct device *dev, - struct device_attribute *attr, +static ssize_t ad5446_write_dac_powerdown(struct iio_dev *indio_dev, + uintptr_t private, + const struct iio_chan_spec *chan, const char *buf, size_t len) { - struct iio_dev *indio_dev = dev_get_drvdata(dev); struct ad5446_state *st = iio_priv(indio_dev); - unsigned long readin; + unsigned int shift; + unsigned int val; + bool powerdown; int ret; - ret = strict_strtol(buf, 10, &readin); + ret = strtobool(buf, &powerdown); if (ret) return ret; - if (readin > 1) - ret = -EINVAL; - mutex_lock(&indio_dev->mlock); - st->pwr_down = readin; + st->pwr_down = powerdown; - if (st->pwr_down) - st->chip_info->store_pwr_down(st, st->pwr_down_mode); - else - st->chip_info->store_sample(st, st->cached_val); + if (st->pwr_down) { + shift = chan->scan_type.realbits + chan->scan_type.shift; + val = st->pwr_down_mode << shift; + } else { + val = st->cached_val; + } - ret = spi_sync(st->spi, &st->msg); + ret = st->chip_info->write(st, val); mutex_unlock(&indio_dev->mlock); return ret ? ret : len; } -static IIO_DEVICE_ATTR(out_voltage_powerdown_mode, S_IRUGO | S_IWUSR, - ad5446_read_powerdown_mode, - ad5446_write_powerdown_mode, 0); - -static IIO_CONST_ATTR(out_voltage_powerdown_mode_available, - "1kohm_to_gnd 100kohm_to_gnd three_state"); - -static IIO_DEVICE_ATTR(out_voltage0_powerdown, S_IRUGO | S_IWUSR, - ad5446_read_dac_powerdown, - ad5446_write_dac_powerdown, 0); - -static struct attribute *ad5446_attributes[] = { - &iio_dev_attr_out_voltage0_powerdown.dev_attr.attr, - &iio_dev_attr_out_voltage_powerdown_mode.dev_attr.attr, - &iio_const_attr_out_voltage_powerdown_mode_available.dev_attr.attr, - NULL, -}; - -static const struct attribute_group ad5446_attribute_group = { - .attrs = ad5446_attributes, +static const struct iio_chan_spec_ext_info ad5064_ext_info_powerdown[] = { + { + .name = "powerdown", + .read = ad5446_read_dac_powerdown, + .write = ad5446_write_dac_powerdown, + }, { + .name = "powerdown_mode", + .read = ad5446_read_powerdown_mode, + .write = ad5446_write_powerdown_mode, + }, { + .name = "powerdown_mode_available", + .shared = true, + .read = ad5446_read_powerdown_mode_available, + }, + { }, }; -#define AD5446_CHANNEL(bits, storage, shift) { \ +#define _AD5446_CHANNEL(bits, storage, shift, ext) { \ .type = IIO_VOLTAGE, \ .indexed = 1, \ .output = 1, \ .channel = 0, \ - .info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT, \ - .scan_type = IIO_ST('u', (bits), (storage), (shift)) \ + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \ + IIO_CHAN_INFO_SCALE_SHARED_BIT, \ + .scan_type = IIO_ST('u', (bits), (storage), (shift)), \ + .ext_info = (ext), \ } +#define AD5446_CHANNEL(bits, storage, shift) \ + _AD5446_CHANNEL(bits, storage, shift, NULL) + +#define AD5446_CHANNEL_POWERDOWN(bits, storage, shift) \ + _AD5446_CHANNEL(bits, storage, shift, ad5064_ext_info_powerdown) + static const struct ad5446_chip_info ad5446_chip_info_tbl[] = { [ID_AD5444] = { .channel = AD5446_CHANNEL(12, 16, 2), - .store_sample = ad5446_store_sample, + .write = ad5446_write, }, [ID_AD5446] = { .channel = AD5446_CHANNEL(14, 16, 0), - .store_sample = ad5446_store_sample, + .write = ad5446_write, }, [ID_AD5541A] = { .channel = AD5446_CHANNEL(16, 16, 0), - .store_sample = ad5542_store_sample, - }, - [ID_AD5542A] = { - .channel = AD5446_CHANNEL(16, 16, 0), - .store_sample = ad5542_store_sample, - }, - [ID_AD5543] = { - .channel = AD5446_CHANNEL(16, 16, 0), - .store_sample = ad5542_store_sample, + .write = ad5446_write, }, [ID_AD5512A] = { .channel = AD5446_CHANNEL(12, 16, 4), - .store_sample = ad5542_store_sample, + .write = ad5446_write, }, [ID_AD5553] = { .channel = AD5446_CHANNEL(14, 16, 0), - .store_sample = ad5542_store_sample, + .write = ad5446_write, }, [ID_AD5601] = { - .channel = AD5446_CHANNEL(8, 16, 6), - .store_sample = ad5542_store_sample, - .store_pwr_down = ad5620_store_pwr_down, + .channel = AD5446_CHANNEL_POWERDOWN(8, 16, 6), + .write = ad5446_write, }, [ID_AD5611] = { - .channel = AD5446_CHANNEL(10, 16, 4), - .store_sample = ad5542_store_sample, - .store_pwr_down = ad5620_store_pwr_down, + .channel = AD5446_CHANNEL_POWERDOWN(10, 16, 4), + .write = ad5446_write, }, [ID_AD5621] = { - .channel = AD5446_CHANNEL(12, 16, 2), - .store_sample = ad5542_store_sample, - .store_pwr_down = ad5620_store_pwr_down, + .channel = AD5446_CHANNEL_POWERDOWN(12, 16, 2), + .write = ad5446_write, }, [ID_AD5620_2500] = { - .channel = AD5446_CHANNEL(12, 16, 2), + .channel = AD5446_CHANNEL_POWERDOWN(12, 16, 2), .int_vref_mv = 2500, - .store_sample = ad5620_store_sample, - .store_pwr_down = ad5620_store_pwr_down, + .write = ad5446_write, }, [ID_AD5620_1250] = { - .channel = AD5446_CHANNEL(12, 16, 2), + .channel = AD5446_CHANNEL_POWERDOWN(12, 16, 2), .int_vref_mv = 1250, - .store_sample = ad5620_store_sample, - .store_pwr_down = ad5620_store_pwr_down, + .write = ad5446_write, }, [ID_AD5640_2500] = { - .channel = AD5446_CHANNEL(14, 16, 0), + .channel = AD5446_CHANNEL_POWERDOWN(14, 16, 0), .int_vref_mv = 2500, - .store_sample = ad5620_store_sample, - .store_pwr_down = ad5620_store_pwr_down, + .write = ad5446_write, }, [ID_AD5640_1250] = { - .channel = AD5446_CHANNEL(14, 16, 0), + .channel = AD5446_CHANNEL_POWERDOWN(14, 16, 0), .int_vref_mv = 1250, - .store_sample = ad5620_store_sample, - .store_pwr_down = ad5620_store_pwr_down, + .write = ad5446_write, }, [ID_AD5660_2500] = { - .channel = AD5446_CHANNEL(16, 16, 0), + .channel = AD5446_CHANNEL_POWERDOWN(16, 16, 0), .int_vref_mv = 2500, - .store_sample = ad5660_store_sample, - .store_pwr_down = ad5660_store_pwr_down, + .write = ad5660_write, }, [ID_AD5660_1250] = { - .channel = AD5446_CHANNEL(16, 16, 0), + .channel = AD5446_CHANNEL_POWERDOWN(16, 16, 0), .int_vref_mv = 1250, - .store_sample = ad5660_store_sample, - .store_pwr_down = ad5660_store_pwr_down, + .write = ad5660_write, + }, + [ID_AD5662] = { + .channel = AD5446_CHANNEL_POWERDOWN(16, 16, 0), + .write = ad5660_write, }, }; @@ -254,6 +237,9 @@ static int ad5446_read_raw(struct iio_dev *indio_dev, unsigned long scale_uv; switch (m) { + case IIO_CHAN_INFO_RAW: + *val = st->cached_val; + return IIO_VAL_INT; case IIO_CHAN_INFO_SCALE: scale_uv = (st->vref_mv * 1000) >> chan->scan_type.realbits; *val = scale_uv / 1000; @@ -271,18 +257,18 @@ static int ad5446_write_raw(struct iio_dev *indio_dev, long mask) { struct ad5446_state *st = iio_priv(indio_dev); - int ret; + int ret = 0; switch (mask) { - case 0: + case IIO_CHAN_INFO_RAW: if (val >= (1 << chan->scan_type.realbits) || val < 0) return -EINVAL; val <<= chan->scan_type.shift; mutex_lock(&indio_dev->mlock); st->cached_val = val; - st->chip_info->store_sample(st, val); - ret = spi_sync(st->spi, &st->msg); + if (!st->pwr_down) + ret = st->chip_info->write(st, val); mutex_unlock(&indio_dev->mlock); break; default: @@ -295,13 +281,6 @@ static int ad5446_write_raw(struct iio_dev *indio_dev, static const struct iio_info ad5446_info = { .read_raw = ad5446_read_raw, .write_raw = ad5446_write_raw, - .attrs = &ad5446_attribute_group, - .driver_module = THIS_MODULE, -}; - -static const struct iio_info ad5446_info_no_pwr_down = { - .read_raw = ad5446_read_raw, - .write_raw = ad5446_write_raw, .driver_module = THIS_MODULE, }; @@ -321,7 +300,7 @@ static int __devinit ad5446_probe(struct spi_device *spi) voltage_uv = regulator_get_voltage(reg); } - indio_dev = iio_allocate_device(sizeof(*st)); + indio_dev = iio_device_alloc(sizeof(*st)); if (indio_dev == NULL) { ret = -ENOMEM; goto error_disable_reg; @@ -337,38 +316,17 @@ static int __devinit ad5446_probe(struct spi_device *spi) /* Establish that the iio_dev is a child of the spi device */ indio_dev->dev.parent = &spi->dev; indio_dev->name = spi_get_device_id(spi)->name; - if (st->chip_info->store_pwr_down) - indio_dev->info = &ad5446_info; - else - indio_dev->info = &ad5446_info_no_pwr_down; + indio_dev->info = &ad5446_info; indio_dev->modes = INDIO_DIRECT_MODE; indio_dev->channels = &st->chip_info->channel; indio_dev->num_channels = 1; - /* Setup default message */ - - st->xfer.tx_buf = &st->data; - st->xfer.len = st->chip_info->channel.scan_type.storagebits / 8; - - spi_message_init(&st->msg); - spi_message_add_tail(&st->xfer, &st->msg); - - switch (spi_get_device_id(spi)->driver_data) { - case ID_AD5620_2500: - case ID_AD5620_1250: - case ID_AD5640_2500: - case ID_AD5640_1250: - case ID_AD5660_2500: - case ID_AD5660_1250: + if (st->chip_info->int_vref_mv) st->vref_mv = st->chip_info->int_vref_mv; - break; - default: - if (voltage_uv) - st->vref_mv = voltage_uv / 1000; - else - dev_warn(&spi->dev, - "reference voltage unspecified\n"); - } + else if (voltage_uv) + st->vref_mv = voltage_uv / 1000; + else + dev_warn(&spi->dev, "reference voltage unspecified\n"); ret = iio_device_register(indio_dev); if (ret) @@ -377,7 +335,7 @@ static int __devinit ad5446_probe(struct spi_device *spi) return 0; error_free_device: - iio_free_device(indio_dev); + iio_device_free(indio_dev); error_disable_reg: if (!IS_ERR(reg)) regulator_disable(reg); @@ -398,7 +356,7 @@ static int ad5446_remove(struct spi_device *spi) regulator_disable(st->reg); regulator_put(st->reg); } - iio_free_device(indio_dev); + iio_device_free(indio_dev); return 0; } @@ -408,8 +366,8 @@ static const struct spi_device_id ad5446_id[] = { {"ad5446", ID_AD5446}, {"ad5512a", ID_AD5512A}, {"ad5541a", ID_AD5541A}, - {"ad5542a", ID_AD5542A}, - {"ad5543", ID_AD5543}, + {"ad5542a", ID_AD5541A}, /* ad5541a and ad5542a are compatible */ + {"ad5543", ID_AD5541A}, /* ad5541a and ad5543 are compatible */ {"ad5553", ID_AD5553}, {"ad5601", ID_AD5601}, {"ad5611", ID_AD5611}, @@ -420,6 +378,7 @@ static const struct spi_device_id ad5446_id[] = { {"ad5640-1250", ID_AD5640_1250}, {"ad5660-2500", ID_AD5660_2500}, {"ad5660-1250", ID_AD5660_1250}, + {"ad5662", ID_AD5662}, {} }; MODULE_DEVICE_TABLE(spi, ad5446_id); diff --git a/drivers/staging/iio/dac/ad5446.h b/drivers/staging/iio/dac/ad5446.h index 4ea3476fb06..dfd68ce7427 100644 --- a/drivers/staging/iio/dac/ad5446.h +++ b/drivers/staging/iio/dac/ad5446.h @@ -34,43 +34,30 @@ * @spi: spi_device * @chip_info: chip model specific constants, available modes etc * @reg: supply regulator - * @poll_work: bottom half of polling interrupt handler * @vref_mv: actual reference voltage used - * @xfer: default spi transfer - * @msg: default spi message - * @data: spi transmit buffer */ struct ad5446_state { struct spi_device *spi; const struct ad5446_chip_info *chip_info; struct regulator *reg; - struct work_struct poll_work; unsigned short vref_mv; unsigned cached_val; unsigned pwr_down_mode; unsigned pwr_down; - struct spi_transfer xfer; - struct spi_message msg; - union { - unsigned short d16; - unsigned char d24[3]; - } data; }; /** * struct ad5446_chip_info - chip specific information * @channel: channel spec for the DAC * @int_vref_mv: AD5620/40/60: the internal reference voltage - * @store_sample: chip specific helper function to store the datum - * @store_sample: chip specific helper function to store the powerpown cmd + * @write: chip specific helper function to write to the register */ struct ad5446_chip_info { struct iio_chan_spec channel; u16 int_vref_mv; - void (*store_sample) (struct ad5446_state *st, unsigned val); - void (*store_pwr_down) (struct ad5446_state *st, unsigned mode); + int (*write)(struct ad5446_state *st, unsigned val); }; /** @@ -85,8 +72,6 @@ enum ad5446_supported_device_ids { ID_AD5444, ID_AD5446, ID_AD5541A, - ID_AD5542A, - ID_AD5543, ID_AD5512A, ID_AD5553, ID_AD5601, @@ -98,6 +83,7 @@ enum ad5446_supported_device_ids { ID_AD5640_1250, ID_AD5660_2500, ID_AD5660_1250, + ID_AD5662, }; #endif /* IIO_DAC_AD5446_H_ */ diff --git a/drivers/staging/iio/dac/ad5504.c b/drivers/staging/iio/dac/ad5504.c index bc17205fe72..e47f4d0967b 100644 --- a/drivers/staging/iio/dac/ad5504.c +++ b/drivers/staging/iio/dac/ad5504.c @@ -16,9 +16,9 @@ #include <linux/regulator/consumer.h> #include <linux/module.h> -#include "../iio.h" -#include "../sysfs.h" -#include "../events.h" +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/events.h> #include "dac.h" #include "ad5504.h" @@ -27,7 +27,8 @@ .indexed = 1, \ .output = 1, \ .channel = (_chan), \ - .info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT, \ + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \ + IIO_CHAN_INFO_SCALE_SHARED_BIT, \ .address = AD5504_ADDR_DAC(_chan), \ .scan_type = IIO_ST('u', 12, 16, 0), \ } @@ -81,7 +82,7 @@ static int ad5504_read_raw(struct iio_dev *indio_dev, int ret; switch (m) { - case 0: + case IIO_CHAN_INFO_RAW: ret = ad5504_spi_read(st->spi, chan->address); if (ret < 0) return ret; @@ -109,7 +110,7 @@ static int ad5504_write_raw(struct iio_dev *indio_dev, int ret; switch (mask) { - case 0: + case IIO_CHAN_INFO_RAW: if (val >= (1 << chan->scan_type.realbits) || val < 0) return -EINVAL; @@ -287,7 +288,7 @@ static int __devinit ad5504_probe(struct spi_device *spi) struct regulator *reg; int ret, voltage_uv = 0; - indio_dev = iio_allocate_device(sizeof(*st)); + indio_dev = iio_device_alloc(sizeof(*st)); if (indio_dev == NULL) { ret = -ENOMEM; goto error_ret; @@ -350,7 +351,7 @@ error_put_reg: if (!IS_ERR(reg)) regulator_put(reg); - iio_free_device(indio_dev); + iio_device_free(indio_dev); error_ret: return ret; } @@ -368,7 +369,7 @@ static int __devexit ad5504_remove(struct spi_device *spi) regulator_disable(st->reg); regulator_put(st->reg); } - iio_free_device(indio_dev); + iio_device_free(indio_dev); return 0; } diff --git a/drivers/staging/iio/dac/ad5624r_spi.c b/drivers/staging/iio/dac/ad5624r_spi.c index 10c7484366e..cde4a9f8d89 100644 --- a/drivers/staging/iio/dac/ad5624r_spi.c +++ b/drivers/staging/iio/dac/ad5624r_spi.c @@ -16,8 +16,8 @@ #include <linux/regulator/consumer.h> #include <linux/module.h> -#include "../iio.h" -#include "../sysfs.h" +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> #include "dac.h" #include "ad5624r.h" @@ -26,7 +26,8 @@ .indexed = 1, \ .output = 1, \ .channel = (_chan), \ - .info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT, \ + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \ + IIO_CHAN_INFO_SCALE_SHARED_BIT, \ .address = (_chan), \ .scan_type = IIO_ST('u', (_bits), 16, 16 - (_bits)), \ } @@ -122,7 +123,7 @@ static int ad5624r_write_raw(struct iio_dev *indio_dev, int ret; switch (mask) { - case 0: + case IIO_CHAN_INFO_RAW: if (val >= (1 << chan->scan_type.realbits) || val < 0) return -EINVAL; @@ -255,7 +256,7 @@ static int __devinit ad5624r_probe(struct spi_device *spi) struct iio_dev *indio_dev; int ret, voltage_uv = 0; - indio_dev = iio_allocate_device(sizeof(*st)); + indio_dev = iio_device_alloc(sizeof(*st)); if (indio_dev == NULL) { ret = -ENOMEM; goto error_ret; @@ -305,7 +306,7 @@ error_disable_reg: error_put_reg: if (!IS_ERR(st->reg)) regulator_put(st->reg); - iio_free_device(indio_dev); + iio_device_free(indio_dev); error_ret: return ret; @@ -321,7 +322,7 @@ static int __devexit ad5624r_remove(struct spi_device *spi) regulator_disable(st->reg); regulator_put(st->reg); } - iio_free_device(indio_dev); + iio_device_free(indio_dev); return 0; } diff --git a/drivers/staging/iio/dac/ad5686.c b/drivers/staging/iio/dac/ad5686.c index 2415a6e60c7..6a74436af59 100644 --- a/drivers/staging/iio/dac/ad5686.c +++ b/drivers/staging/iio/dac/ad5686.c @@ -16,8 +16,8 @@ #include <linux/sysfs.h> #include <linux/regulator/consumer.h> -#include "../iio.h" -#include "../sysfs.h" +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> #include "dac.h" #define AD5686_DAC_CHANNELS 4 @@ -98,7 +98,8 @@ enum ad5686_supported_device_ids { .indexed = 1, \ .output = 1, \ .channel = chan, \ - .info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT, \ + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \ + IIO_CHAN_INFO_SCALE_SHARED_BIT, \ .address = AD5686_ADDR_DAC(chan), \ .scan_type = IIO_ST('u', bits, 16, shift) \ } @@ -296,7 +297,7 @@ static int ad5686_read_raw(struct iio_dev *indio_dev, int ret; switch (m) { - case 0: + case IIO_CHAN_INFO_RAW: mutex_lock(&indio_dev->mlock); ret = ad5686_spi_read(st, chan->address); mutex_unlock(&indio_dev->mlock); @@ -326,7 +327,7 @@ static int ad5686_write_raw(struct iio_dev *indio_dev, int ret; switch (mask) { - case 0: + case IIO_CHAN_INFO_RAW: if (val > (1 << chan->scan_type.realbits) || val < 0) return -EINVAL; @@ -358,7 +359,7 @@ static int __devinit ad5686_probe(struct spi_device *spi) struct iio_dev *indio_dev; int ret, regdone = 0, voltage_uv = 0; - indio_dev = iio_allocate_device(sizeof(*st)); + indio_dev = iio_device_alloc(sizeof(*st)); if (indio_dev == NULL) return -ENOMEM; @@ -410,7 +411,7 @@ error_put_reg: if (!IS_ERR(st->reg)) regulator_put(st->reg); - iio_free_device(indio_dev); + iio_device_free(indio_dev); return ret; } @@ -425,7 +426,7 @@ static int __devexit ad5686_remove(struct spi_device *spi) regulator_disable(st->reg); regulator_put(st->reg); } - iio_free_device(indio_dev); + iio_device_free(indio_dev); return 0; } diff --git a/drivers/staging/iio/dac/ad5764.c b/drivers/staging/iio/dac/ad5764.c index f73a7307949..03dbd937b08 100644 --- a/drivers/staging/iio/dac/ad5764.c +++ b/drivers/staging/iio/dac/ad5764.c @@ -16,8 +16,8 @@ #include <linux/sysfs.h> #include <linux/regulator/consumer.h> -#include "../iio.h" -#include "../sysfs.h" +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> #include "dac.h" #define AD5764_REG_SF_NOP 0x0 @@ -79,7 +79,8 @@ enum ad5764_type { .output = 1, \ .channel = (_chan), \ .address = (_chan), \ - .info_mask = IIO_CHAN_INFO_OFFSET_SHARED_BIT | \ + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \ + IIO_CHAN_INFO_OFFSET_SHARED_BIT | \ IIO_CHAN_INFO_SCALE_SEPARATE_BIT | \ IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT | \ IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT, \ @@ -188,7 +189,7 @@ static int ad5764_write_raw(struct iio_dev *indio_dev, unsigned int reg; switch (info) { - case 0: + case IIO_CHAN_INFO_RAW: if (val >= max_val || val < 0) return -EINVAL; val <<= chan->scan_type.shift; @@ -228,7 +229,7 @@ static int ad5764_read_raw(struct iio_dev *indio_dev, int ret; switch (info) { - case 0: + case IIO_CHAN_INFO_RAW: reg = AD5764_REG_DATA(chan->address); ret = ad5764_read(indio_dev, reg, val); if (ret < 0) @@ -280,7 +281,7 @@ static int __devinit ad5764_probe(struct spi_device *spi) struct ad5764_state *st; int ret; - indio_dev = iio_allocate_device(sizeof(*st)); + indio_dev = iio_device_alloc(sizeof(*st)); if (indio_dev == NULL) { dev_err(&spi->dev, "Failed to allocate iio device\n"); return -ENOMEM; @@ -335,7 +336,7 @@ error_free_reg: if (st->chip_info->int_vref == 0) regulator_bulk_free(ARRAY_SIZE(st->vref_reg), st->vref_reg); error_free: - iio_free_device(indio_dev); + iio_device_free(indio_dev); return ret; } @@ -352,7 +353,7 @@ static int __devexit ad5764_remove(struct spi_device *spi) regulator_bulk_free(ARRAY_SIZE(st->vref_reg), st->vref_reg); } - iio_free_device(indio_dev); + iio_device_free(indio_dev); return 0; } diff --git a/drivers/staging/iio/dac/ad5791.c b/drivers/staging/iio/dac/ad5791.c index ac45636a8d7..1cc75e6cd90 100644 --- a/drivers/staging/iio/dac/ad5791.c +++ b/drivers/staging/iio/dac/ad5791.c @@ -17,8 +17,8 @@ #include <linux/regulator/consumer.h> #include <linux/module.h> -#include "../iio.h" -#include "../sysfs.h" +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> #include "dac.h" #include "ad5791.h" @@ -78,7 +78,8 @@ static int ad5791_spi_read(struct spi_device *spi, u8 addr, u32 *val) .indexed = 1, \ .address = AD5791_ADDR_DAC0, \ .channel = 0, \ - .info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT | \ + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \ + IIO_CHAN_INFO_SCALE_SHARED_BIT | \ IIO_CHAN_INFO_OFFSET_SHARED_BIT, \ .scan_type = IIO_ST('u', bits, 24, shift) \ } @@ -231,7 +232,7 @@ static int ad5791_read_raw(struct iio_dev *indio_dev, int ret; switch (m) { - case 0: + case IIO_CHAN_INFO_RAW: ret = ad5791_spi_read(st->spi, chan->address, val); if (ret) return ret; @@ -263,7 +264,7 @@ static int ad5791_write_raw(struct iio_dev *indio_dev, struct ad5791_state *st = iio_priv(indio_dev); switch (mask) { - case 0: + case IIO_CHAN_INFO_RAW: val &= AD5791_RES_MASK(chan->scan_type.realbits); val <<= chan->scan_type.shift; @@ -288,7 +289,7 @@ static int __devinit ad5791_probe(struct spi_device *spi) struct ad5791_state *st; int ret, pos_voltage_uv = 0, neg_voltage_uv = 0; - indio_dev = iio_allocate_device(sizeof(*st)); + indio_dev = iio_device_alloc(sizeof(*st)); if (indio_dev == NULL) { ret = -ENOMEM; goto error_ret; @@ -368,7 +369,7 @@ error_put_reg_neg: error_put_reg_pos: if (!IS_ERR(st->reg_vdd)) regulator_put(st->reg_vdd); - iio_free_device(indio_dev); + iio_device_free(indio_dev); error_ret: return ret; @@ -389,7 +390,7 @@ static int __devexit ad5791_remove(struct spi_device *spi) regulator_disable(st->reg_vss); regulator_put(st->reg_vss); } - iio_free_device(indio_dev); + iio_device_free(indio_dev); return 0; } diff --git a/drivers/staging/iio/dac/max517.c b/drivers/staging/iio/dac/max517.c index 41483c72cec..a3f588dfdbf 100644 --- a/drivers/staging/iio/dac/max517.c +++ b/drivers/staging/iio/dac/max517.c @@ -25,8 +25,8 @@ #include <linux/i2c.h> #include <linux/err.h> -#include "../iio.h" -#include "../sysfs.h" +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> #include "dac.h" #include "max517.h" @@ -218,7 +218,7 @@ static int max517_probe(struct i2c_client *client, struct max517_platform_data *platform_data = client->dev.platform_data; int err; - indio_dev = iio_allocate_device(sizeof(*data)); + indio_dev = iio_device_alloc(sizeof(*data)); if (indio_dev == NULL) { err = -ENOMEM; goto exit; @@ -257,14 +257,14 @@ static int max517_probe(struct i2c_client *client, return 0; exit_free_device: - iio_free_device(indio_dev); + iio_device_free(indio_dev); exit: return err; } static int max517_remove(struct i2c_client *client) { - iio_free_device(i2c_get_clientdata(client)); + iio_device_free(i2c_get_clientdata(client)); return 0; } diff --git a/drivers/staging/iio/dds/dds.h b/drivers/staging/iio/dds/dds.h deleted file mode 100644 index d8ac3a93baf..00000000000 --- a/drivers/staging/iio/dds/dds.h +++ /dev/null @@ -1,110 +0,0 @@ -/* - * dds.h - sysfs attributes associated with DDS devices - * - * Copyright (c) 2010 Analog Devices Inc. - * - * Licensed under the GPL-2 or later. - */ - -/** - * /sys/bus/iio/devices/.../ddsX_freqY - */ - -#define IIO_DEV_ATTR_FREQ(_channel, _num, _mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(dds##_channel##_freq##_num, \ - _mode, _show, _store, _addr) - -/** - * /sys/bus/iio/devices/.../ddsX_freqY_scale - */ - -#define IIO_CONST_ATTR_FREQ_SCALE(_channel, _string) \ - IIO_CONST_ATTR(dds##_channel##_freq_scale, _string) - -/** - * /sys/bus/iio/devices/.../ddsX_freqsymbol - */ - -#define IIO_DEV_ATTR_FREQSYMBOL(_channel, _mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(dds##_channel##_freqsymbol, \ - _mode, _show, _store, _addr); - -/** - * /sys/bus/iio/devices/.../ddsX_phaseY - */ - -#define IIO_DEV_ATTR_PHASE(_channel, _num, _mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(dds##_channel##_phase##_num, \ - _mode, _show, _store, _addr) - -/** - * /sys/bus/iio/devices/.../ddsX_phaseY_scale - */ - -#define IIO_CONST_ATTR_PHASE_SCALE(_channel, _string) \ - IIO_CONST_ATTR(dds##_channel##_phase_scale, _string) - -/** - * /sys/bus/iio/devices/.../ddsX_phasesymbol - */ - -#define IIO_DEV_ATTR_PHASESYMBOL(_channel, _mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(dds##_channel##_phasesymbol, \ - _mode, _show, _store, _addr); - -/** - * /sys/bus/iio/devices/.../ddsX_pincontrol_en - */ - -#define IIO_DEV_ATTR_PINCONTROL_EN(_channel, _mode, _show, _store, _addr)\ - IIO_DEVICE_ATTR(dds##_channel##_pincontrol_en, \ - _mode, _show, _store, _addr); - -/** - * /sys/bus/iio/devices/.../ddsX_pincontrol_freq_en - */ - -#define IIO_DEV_ATTR_PINCONTROL_FREQ_EN(_channel, _mode, _show, _store, _addr)\ - IIO_DEVICE_ATTR(dds##_channel##_pincontrol_freq_en, \ - _mode, _show, _store, _addr); - -/** - * /sys/bus/iio/devices/.../ddsX_pincontrol_phase_en - */ - -#define IIO_DEV_ATTR_PINCONTROL_PHASE_EN(_channel, _mode, _show, _store, _addr)\ - IIO_DEVICE_ATTR(dds##_channel##_pincontrol_phase_en, \ - _mode, _show, _store, _addr); - -/** - * /sys/bus/iio/devices/.../ddsX_out_enable - */ - -#define IIO_DEV_ATTR_OUT_ENABLE(_channel, _mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(dds##_channel##_out_enable, \ - _mode, _show, _store, _addr); - -/** - * /sys/bus/iio/devices/.../ddsX_outY_enable - */ - -#define IIO_DEV_ATTR_OUTY_ENABLE(_channel, _output, \ - _mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(dds##_channel##_out##_output##_enable, \ - _mode, _show, _store, _addr); - -/** - * /sys/bus/iio/devices/.../ddsX_outY_wavetype - */ - -#define IIO_DEV_ATTR_OUT_WAVETYPE(_channel, _output, _store, _addr) \ - IIO_DEVICE_ATTR(dds##_channel##_out##_output##_wavetype, \ - S_IWUSR, NULL, _store, _addr); - -/** - * /sys/bus/iio/devices/.../ddsX_outY_wavetype_available - */ - -#define IIO_CONST_ATTR_OUT_WAVETYPES_AVAILABLE(_channel, _output, _modes)\ - IIO_CONST_ATTR(dds##_channel##_out##_output##_wavetype_available,\ - _modes); diff --git a/drivers/staging/iio/driver.h b/drivers/staging/iio/driver.h deleted file mode 100644 index a4f8b2e05af..00000000000 --- a/drivers/staging/iio/driver.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * Industrial I/O in kernel access map interface. - * - * Copyright (c) 2011 Jonathan Cameron - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ - -#ifndef _IIO_INKERN_H_ -#define _IIO_INKERN_H_ - -struct iio_map; - -/** - * iio_map_array_register() - tell the core about inkernel consumers - * @indio_dev: provider device - * @map: array of mappings specifying association of channel with client - */ -int iio_map_array_register(struct iio_dev *indio_dev, - struct iio_map *map); - -/** - * iio_map_array_unregister() - tell the core to remove consumer mappings - * @indio_dev: provider device - * @map: array of mappings to remove. Note these must have same memory - * addresses as those originally added not just equal parameter - * values. - */ -int iio_map_array_unregister(struct iio_dev *indio_dev, - struct iio_map *map); - -#endif diff --git a/drivers/staging/iio/events.h b/drivers/staging/iio/events.h deleted file mode 100644 index c25f0e3c92e..00000000000 --- a/drivers/staging/iio/events.h +++ /dev/null @@ -1,105 +0,0 @@ -/* The industrial I/O - event passing to userspace - * - * Copyright (c) 2008-2011 Jonathan Cameron - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ -#ifndef _IIO_EVENTS_H_ -#define _IIO_EVENTS_H_ - -#include <linux/ioctl.h> -#include <linux/types.h> -#include "types.h" - -/** - * struct iio_event_data - The actual event being pushed to userspace - * @id: event identifier - * @timestamp: best estimate of time of event occurrence (often from - * the interrupt handler) - */ -struct iio_event_data { - __u64 id; - __s64 timestamp; -}; - -#define IIO_GET_EVENT_FD_IOCTL _IOR('i', 0x90, int) - -enum iio_event_type { - IIO_EV_TYPE_THRESH, - IIO_EV_TYPE_MAG, - IIO_EV_TYPE_ROC, - IIO_EV_TYPE_THRESH_ADAPTIVE, - IIO_EV_TYPE_MAG_ADAPTIVE, -}; - -enum iio_event_direction { - IIO_EV_DIR_EITHER, - IIO_EV_DIR_RISING, - IIO_EV_DIR_FALLING, -}; - -/** - * IIO_EVENT_CODE() - create event identifier - * @chan_type: Type of the channel. Should be one of enum iio_chan_type. - * @diff: Whether the event is for an differential channel or not. - * @modifier: Modifier for the channel. Should be one of enum iio_modifier. - * @direction: Direction of the event. One of enum iio_event_direction. - * @type: Type of the event. Should be one enum iio_event_type. - * @chan: Channel number for non-differential channels. - * @chan1: First channel number for differential channels. - * @chan2: Second channel number for differential channels. - */ - -#define IIO_EVENT_CODE(chan_type, diff, modifier, direction, \ - type, chan, chan1, chan2) \ - (((u64)type << 56) | ((u64)diff << 55) | \ - ((u64)direction << 48) | ((u64)modifier << 40) | \ - ((u64)chan_type << 32) | (((u16)chan2) << 16) | ((u16)chan1) | \ - ((u16)chan)) - - -#define IIO_EV_DIR_MAX 4 -#define IIO_EV_BIT(type, direction) \ - (1 << (type*IIO_EV_DIR_MAX + direction)) - -/** - * IIO_MOD_EVENT_CODE() - create event identifier for modified channels - * @chan_type: Type of the channel. Should be one of enum iio_chan_type. - * @number: Channel number. - * @modifier: Modifier for the channel. Should be one of enum iio_modifier. - * @type: Type of the event. Should be one enum iio_event_type. - * @direction: Direction of the event. One of enum iio_event_direction. - */ - -#define IIO_MOD_EVENT_CODE(chan_type, number, modifier, \ - type, direction) \ - IIO_EVENT_CODE(chan_type, 0, modifier, direction, type, number, 0, 0) - -/** - * IIO_UNMOD_EVENT_CODE() - create event identifier for unmodified channels - * @chan_type: Type of the channel. Should be one of enum iio_chan_type. - * @number: Channel number. - * @type: Type of the event. Should be one enum iio_event_type. - * @direction: Direction of the event. One of enum iio_event_direction. - */ - -#define IIO_UNMOD_EVENT_CODE(chan_type, number, type, direction) \ - IIO_EVENT_CODE(chan_type, 0, 0, direction, type, number, 0, 0) - -#define IIO_EVENT_CODE_EXTRACT_TYPE(mask) ((mask >> 56) & 0xFF) - -#define IIO_EVENT_CODE_EXTRACT_DIR(mask) ((mask >> 48) & 0xCF) - -#define IIO_EVENT_CODE_EXTRACT_CHAN_TYPE(mask) ((mask >> 32) & 0xFF) - -/* Event code number extraction depends on which type of event we have. - * Perhaps review this function in the future*/ -#define IIO_EVENT_CODE_EXTRACT_CHAN(mask) ((__s16)(mask & 0xFFFF)) -#define IIO_EVENT_CODE_EXTRACT_CHAN2(mask) ((__s16)(((mask) >> 16) & 0xFFFF)) - -#define IIO_EVENT_CODE_EXTRACT_MODIFIER(mask) ((mask >> 40) & 0xFF) -#define IIO_EVENT_CODE_EXTRACT_DIFF(mask) (((mask) >> 55) & 0x1) - -#endif diff --git a/drivers/staging/iio/dds/Kconfig b/drivers/staging/iio/frequency/Kconfig index 93b7141b2c1..93b7141b2c1 100644 --- a/drivers/staging/iio/dds/Kconfig +++ b/drivers/staging/iio/frequency/Kconfig diff --git a/drivers/staging/iio/dds/Makefile b/drivers/staging/iio/frequency/Makefile index 147746176b9..147746176b9 100644 --- a/drivers/staging/iio/dds/Makefile +++ b/drivers/staging/iio/frequency/Makefile diff --git a/drivers/staging/iio/dds/ad5930.c b/drivers/staging/iio/frequency/ad5930.c index 9c32d1beae2..97542fc9bf2 100644 --- a/drivers/staging/iio/dds/ad5930.c +++ b/drivers/staging/iio/frequency/ad5930.c @@ -16,8 +16,8 @@ #include <linux/sysfs.h> #include <linux/module.h> -#include "../iio.h" -#include "../sysfs.h" +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> #define DRV_NAME "ad5930" @@ -97,7 +97,7 @@ static int __devinit ad5930_probe(struct spi_device *spi) struct iio_dev *idev; int ret = 0; - idev = iio_allocate_device(sizeof(*st)); + idev = iio_device_alloc(sizeof(*st)); if (idev == NULL) { ret = -ENOMEM; goto error_ret; @@ -122,7 +122,7 @@ static int __devinit ad5930_probe(struct spi_device *spi) return 0; error_free_dev: - iio_free_device(idev); + iio_device_free(idev); error_ret: return ret; } @@ -130,7 +130,7 @@ error_ret: static int __devexit ad5930_remove(struct spi_device *spi) { iio_device_unregister(spi_get_drvdata(spi)); - iio_free_device(spi_get_drvdata(spi)); + iio_device_free(spi_get_drvdata(spi)); return 0; } diff --git a/drivers/staging/iio/dds/ad9832.c b/drivers/staging/iio/frequency/ad9832.c index 2ccf25dd928..2f9abac7c41 100644 --- a/drivers/staging/iio/dds/ad9832.c +++ b/drivers/staging/iio/frequency/ad9832.c @@ -16,8 +16,8 @@ #include <linux/module.h> #include <asm/div64.h> -#include "../iio.h" -#include "../sysfs.h" +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> #include "dds.h" #include "ad9832.h" @@ -177,18 +177,18 @@ static IIO_DEV_ATTR_OUT_ENABLE(0, S_IWUSR, NULL, ad9832_write, AD9832_OUTPUT_EN); static struct attribute *ad9832_attributes[] = { - &iio_dev_attr_dds0_freq0.dev_attr.attr, - &iio_dev_attr_dds0_freq1.dev_attr.attr, - &iio_const_attr_dds0_freq_scale.dev_attr.attr, - &iio_dev_attr_dds0_phase0.dev_attr.attr, - &iio_dev_attr_dds0_phase1.dev_attr.attr, - &iio_dev_attr_dds0_phase2.dev_attr.attr, - &iio_dev_attr_dds0_phase3.dev_attr.attr, - &iio_const_attr_dds0_phase_scale.dev_attr.attr, - &iio_dev_attr_dds0_pincontrol_en.dev_attr.attr, - &iio_dev_attr_dds0_freqsymbol.dev_attr.attr, - &iio_dev_attr_dds0_phasesymbol.dev_attr.attr, - &iio_dev_attr_dds0_out_enable.dev_attr.attr, + &iio_dev_attr_out_altvoltage0_frequency0.dev_attr.attr, + &iio_dev_attr_out_altvoltage0_frequency1.dev_attr.attr, + &iio_const_attr_out_altvoltage0_frequency_scale.dev_attr.attr, + &iio_dev_attr_out_altvoltage0_phase0.dev_attr.attr, + &iio_dev_attr_out_altvoltage0_phase1.dev_attr.attr, + &iio_dev_attr_out_altvoltage0_phase2.dev_attr.attr, + &iio_dev_attr_out_altvoltage0_phase3.dev_attr.attr, + &iio_const_attr_out_altvoltage0_phase_scale.dev_attr.attr, + &iio_dev_attr_out_altvoltage0_pincontrol_en.dev_attr.attr, + &iio_dev_attr_out_altvoltage0_frequencysymbol.dev_attr.attr, + &iio_dev_attr_out_altvoltage0_phasesymbol.dev_attr.attr, + &iio_dev_attr_out_altvoltage0_out_enable.dev_attr.attr, NULL, }; @@ -221,7 +221,7 @@ static int __devinit ad9832_probe(struct spi_device *spi) goto error_put_reg; } - indio_dev = iio_allocate_device(sizeof(*st)); + indio_dev = iio_device_alloc(sizeof(*st)); if (indio_dev == NULL) { ret = -ENOMEM; goto error_disable_reg; @@ -313,7 +313,7 @@ static int __devinit ad9832_probe(struct spi_device *spi) return 0; error_free_device: - iio_free_device(indio_dev); + iio_device_free(indio_dev); error_disable_reg: if (!IS_ERR(reg)) regulator_disable(reg); @@ -334,7 +334,7 @@ static int __devexit ad9832_remove(struct spi_device *spi) regulator_disable(st->reg); regulator_put(st->reg); } - iio_free_device(indio_dev); + iio_device_free(indio_dev); return 0; } diff --git a/drivers/staging/iio/dds/ad9832.h b/drivers/staging/iio/frequency/ad9832.h index c5b701f8aab..c5b701f8aab 100644 --- a/drivers/staging/iio/dds/ad9832.h +++ b/drivers/staging/iio/frequency/ad9832.h diff --git a/drivers/staging/iio/dds/ad9834.c b/drivers/staging/iio/frequency/ad9834.c index 38a2de08626..f4b581f20b4 100644 --- a/drivers/staging/iio/dds/ad9834.c +++ b/drivers/staging/iio/frequency/ad9834.c @@ -19,8 +19,8 @@ #include <linux/module.h> #include <asm/div64.h> -#include "../iio.h" -#include "../sysfs.h" +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> #include "dds.h" #include "ad9834.h" @@ -218,7 +218,7 @@ static ssize_t ad9834_show_out0_wavetype_available(struct device *dev, } -static IIO_DEVICE_ATTR(dds0_out0_wavetype_available, S_IRUGO, +static IIO_DEVICE_ATTR(out_altvoltage0_out0_wavetype_available, S_IRUGO, ad9834_show_out0_wavetype_available, NULL, 0); static ssize_t ad9834_show_out1_wavetype_available(struct device *dev, @@ -237,7 +237,7 @@ static ssize_t ad9834_show_out1_wavetype_available(struct device *dev, return sprintf(buf, "%s\n", str); } -static IIO_DEVICE_ATTR(dds0_out1_wavetype_available, S_IRUGO, +static IIO_DEVICE_ATTR(out_altvoltage0_out1_wavetype_available, S_IRUGO, ad9834_show_out1_wavetype_available, NULL, 0); /** @@ -263,36 +263,36 @@ static IIO_DEV_ATTR_OUT_WAVETYPE(0, 0, ad9834_store_wavetype, 0); static IIO_DEV_ATTR_OUT_WAVETYPE(0, 1, ad9834_store_wavetype, 1); static struct attribute *ad9834_attributes[] = { - &iio_dev_attr_dds0_freq0.dev_attr.attr, - &iio_dev_attr_dds0_freq1.dev_attr.attr, - &iio_const_attr_dds0_freq_scale.dev_attr.attr, - &iio_dev_attr_dds0_phase0.dev_attr.attr, - &iio_dev_attr_dds0_phase1.dev_attr.attr, - &iio_const_attr_dds0_phase_scale.dev_attr.attr, - &iio_dev_attr_dds0_pincontrol_en.dev_attr.attr, - &iio_dev_attr_dds0_freqsymbol.dev_attr.attr, - &iio_dev_attr_dds0_phasesymbol.dev_attr.attr, - &iio_dev_attr_dds0_out_enable.dev_attr.attr, - &iio_dev_attr_dds0_out1_enable.dev_attr.attr, - &iio_dev_attr_dds0_out0_wavetype.dev_attr.attr, - &iio_dev_attr_dds0_out1_wavetype.dev_attr.attr, - &iio_dev_attr_dds0_out0_wavetype_available.dev_attr.attr, - &iio_dev_attr_dds0_out1_wavetype_available.dev_attr.attr, + &iio_dev_attr_out_altvoltage0_frequency0.dev_attr.attr, + &iio_dev_attr_out_altvoltage0_frequency1.dev_attr.attr, + &iio_const_attr_out_altvoltage0_frequency_scale.dev_attr.attr, + &iio_dev_attr_out_altvoltage0_phase0.dev_attr.attr, + &iio_dev_attr_out_altvoltage0_phase1.dev_attr.attr, + &iio_const_attr_out_altvoltage0_phase_scale.dev_attr.attr, + &iio_dev_attr_out_altvoltage0_pincontrol_en.dev_attr.attr, + &iio_dev_attr_out_altvoltage0_frequencysymbol.dev_attr.attr, + &iio_dev_attr_out_altvoltage0_phasesymbol.dev_attr.attr, + &iio_dev_attr_out_altvoltage0_out_enable.dev_attr.attr, + &iio_dev_attr_out_altvoltage0_out1_enable.dev_attr.attr, + &iio_dev_attr_out_altvoltage0_out0_wavetype.dev_attr.attr, + &iio_dev_attr_out_altvoltage0_out1_wavetype.dev_attr.attr, + &iio_dev_attr_out_altvoltage0_out0_wavetype_available.dev_attr.attr, + &iio_dev_attr_out_altvoltage0_out1_wavetype_available.dev_attr.attr, NULL, }; static struct attribute *ad9833_attributes[] = { - &iio_dev_attr_dds0_freq0.dev_attr.attr, - &iio_dev_attr_dds0_freq1.dev_attr.attr, - &iio_const_attr_dds0_freq_scale.dev_attr.attr, - &iio_dev_attr_dds0_phase0.dev_attr.attr, - &iio_dev_attr_dds0_phase1.dev_attr.attr, - &iio_const_attr_dds0_phase_scale.dev_attr.attr, - &iio_dev_attr_dds0_freqsymbol.dev_attr.attr, - &iio_dev_attr_dds0_phasesymbol.dev_attr.attr, - &iio_dev_attr_dds0_out_enable.dev_attr.attr, - &iio_dev_attr_dds0_out0_wavetype.dev_attr.attr, - &iio_dev_attr_dds0_out0_wavetype_available.dev_attr.attr, + &iio_dev_attr_out_altvoltage0_frequency0.dev_attr.attr, + &iio_dev_attr_out_altvoltage0_frequency1.dev_attr.attr, + &iio_const_attr_out_altvoltage0_frequency_scale.dev_attr.attr, + &iio_dev_attr_out_altvoltage0_phase0.dev_attr.attr, + &iio_dev_attr_out_altvoltage0_phase1.dev_attr.attr, + &iio_const_attr_out_altvoltage0_phase_scale.dev_attr.attr, + &iio_dev_attr_out_altvoltage0_frequencysymbol.dev_attr.attr, + &iio_dev_attr_out_altvoltage0_phasesymbol.dev_attr.attr, + &iio_dev_attr_out_altvoltage0_out_enable.dev_attr.attr, + &iio_dev_attr_out_altvoltage0_out0_wavetype.dev_attr.attr, + &iio_dev_attr_out_altvoltage0_out0_wavetype_available.dev_attr.attr, NULL, }; @@ -334,7 +334,7 @@ static int __devinit ad9834_probe(struct spi_device *spi) goto error_put_reg; } - indio_dev = iio_allocate_device(sizeof(*st)); + indio_dev = iio_device_alloc(sizeof(*st)); if (indio_dev == NULL) { ret = -ENOMEM; goto error_disable_reg; @@ -414,7 +414,7 @@ static int __devinit ad9834_probe(struct spi_device *spi) return 0; error_free_device: - iio_free_device(indio_dev); + iio_device_free(indio_dev); error_disable_reg: if (!IS_ERR(reg)) regulator_disable(reg); @@ -434,7 +434,7 @@ static int __devexit ad9834_remove(struct spi_device *spi) regulator_disable(st->reg); regulator_put(st->reg); } - iio_free_device(indio_dev); + iio_device_free(indio_dev); return 0; } diff --git a/drivers/staging/iio/dds/ad9834.h b/drivers/staging/iio/frequency/ad9834.h index ed5ed8d0007..ed5ed8d0007 100644 --- a/drivers/staging/iio/dds/ad9834.h +++ b/drivers/staging/iio/frequency/ad9834.h diff --git a/drivers/staging/iio/dds/ad9850.c b/drivers/staging/iio/frequency/ad9850.c index f4f731bb219..39f12a6a08b 100644 --- a/drivers/staging/iio/dds/ad9850.c +++ b/drivers/staging/iio/frequency/ad9850.c @@ -16,8 +16,8 @@ #include <linux/sysfs.h> #include <linux/module.h> -#include "../iio.h" -#include "../sysfs.h" +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> #define DRV_NAME "ad9850" @@ -83,7 +83,7 @@ static int __devinit ad9850_probe(struct spi_device *spi) struct iio_dev *idev; int ret = 0; - idev = iio_allocate_device(sizeof(*st)); + idev = iio_device_alloc(sizeof(*st)); if (idev == NULL) { ret = -ENOMEM; goto error_ret; @@ -108,7 +108,7 @@ static int __devinit ad9850_probe(struct spi_device *spi) return 0; error_free_dev: - iio_free_device(idev); + iio_device_free(idev); error_ret: return ret; } @@ -116,7 +116,7 @@ error_ret: static int __devexit ad9850_remove(struct spi_device *spi) { iio_device_unregister(spi_get_drvdata(spi)); - iio_free_device(spi_get_drvdata(spi)); + iio_device_free(spi_get_drvdata(spi)); return 0; } diff --git a/drivers/staging/iio/dds/ad9852.c b/drivers/staging/iio/frequency/ad9852.c index 554266c615a..58d4bf89e64 100644 --- a/drivers/staging/iio/dds/ad9852.c +++ b/drivers/staging/iio/frequency/ad9852.c @@ -16,8 +16,8 @@ #include <linux/sysfs.h> #include <linux/module.h> -#include "../iio.h" -#include "../sysfs.h" +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> #define DRV_NAME "ad9852" @@ -232,7 +232,7 @@ static int __devinit ad9852_probe(struct spi_device *spi) struct iio_dev *idev; int ret = 0; - idev = iio_allocate_device(sizeof(*st)); + idev = iio_device_alloc(sizeof(*st)); if (idev == NULL) { ret = -ENOMEM; goto error_ret; @@ -258,7 +258,7 @@ static int __devinit ad9852_probe(struct spi_device *spi) return 0; error_free_dev: - iio_free_device(idev); + iio_device_free(idev); error_ret: return ret; @@ -267,7 +267,7 @@ error_ret: static int __devexit ad9852_remove(struct spi_device *spi) { iio_device_unregister(spi_get_drvdata(spi)); - iio_free_device(spi_get_drvdata(spi)); + iio_device_free(spi_get_drvdata(spi)); return 0; } diff --git a/drivers/staging/iio/dds/ad9910.c b/drivers/staging/iio/frequency/ad9910.c index 3985766d6f8..6e7a97e92a2 100644 --- a/drivers/staging/iio/dds/ad9910.c +++ b/drivers/staging/iio/frequency/ad9910.c @@ -16,8 +16,8 @@ #include <linux/sysfs.h> #include <linux/module.h> -#include "../iio.h" -#include "../sysfs.h" +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> #define DRV_NAME "ad9910" @@ -367,7 +367,7 @@ static int __devinit ad9910_probe(struct spi_device *spi) struct iio_dev *idev; int ret = 0; - idev = iio_allocate_device(sizeof(*st)); + idev = iio_device_alloc(sizeof(*st)); if (idev == NULL) { ret = -ENOMEM; goto error_ret; @@ -392,7 +392,7 @@ static int __devinit ad9910_probe(struct spi_device *spi) return 0; error_free_dev: - iio_free_device(idev); + iio_device_free(idev); error_ret: return ret; } @@ -400,7 +400,7 @@ error_ret: static int __devexit ad9910_remove(struct spi_device *spi) { iio_device_unregister(spi_get_drvdata(spi)); - iio_free_device(spi_get_drvdata(spi)); + iio_device_free(spi_get_drvdata(spi)); return 0; } diff --git a/drivers/staging/iio/dds/ad9951.c b/drivers/staging/iio/frequency/ad9951.c index 4d150048002..19ba721788f 100644 --- a/drivers/staging/iio/dds/ad9951.c +++ b/drivers/staging/iio/frequency/ad9951.c @@ -16,8 +16,8 @@ #include <linux/sysfs.h> #include <linux/module.h> -#include "../iio.h" -#include "../sysfs.h" +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> #define DRV_NAME "ad9951" @@ -176,7 +176,7 @@ static int __devinit ad9951_probe(struct spi_device *spi) struct iio_dev *idev; int ret = 0; - idev = iio_allocate_device(sizeof(*st)); + idev = iio_device_alloc(sizeof(*st)); if (idev == NULL) { ret = -ENOMEM; goto error_ret; @@ -202,7 +202,7 @@ static int __devinit ad9951_probe(struct spi_device *spi) return 0; error_free_dev: - iio_free_device(idev); + iio_device_free(idev); error_ret: return ret; @@ -211,7 +211,7 @@ error_ret: static int __devexit ad9951_remove(struct spi_device *spi) { iio_device_unregister(spi_get_drvdata(spi)); - iio_free_device(spi_get_drvdata(spi)); + iio_device_free(spi_get_drvdata(spi)); return 0; } diff --git a/drivers/staging/iio/frequency/dds.h b/drivers/staging/iio/frequency/dds.h new file mode 100644 index 00000000000..c3342f6e052 --- /dev/null +++ b/drivers/staging/iio/frequency/dds.h @@ -0,0 +1,110 @@ +/* + * dds.h - sysfs attributes associated with DDS devices + * + * Copyright (c) 2010 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +/** + * /sys/bus/iio/devices/.../out_altvoltageX_frequencyY + */ + +#define IIO_DEV_ATTR_FREQ(_channel, _num, _mode, _show, _store, _addr) \ + IIO_DEVICE_ATTR(out_altvoltage##_channel##_frequency##_num, \ + _mode, _show, _store, _addr) + +/** + * /sys/bus/iio/devices/.../out_altvoltageX_frequencyY_scale + */ + +#define IIO_CONST_ATTR_FREQ_SCALE(_channel, _string) \ + IIO_CONST_ATTR(out_altvoltage##_channel##_frequency_scale, _string) + +/** + * /sys/bus/iio/devices/.../out_altvoltageX_frequencysymbol + */ + +#define IIO_DEV_ATTR_FREQSYMBOL(_channel, _mode, _show, _store, _addr) \ + IIO_DEVICE_ATTR(out_altvoltage##_channel##_frequencysymbol, \ + _mode, _show, _store, _addr); + +/** + * /sys/bus/iio/devices/.../out_altvoltageX_phaseY + */ + +#define IIO_DEV_ATTR_PHASE(_channel, _num, _mode, _show, _store, _addr) \ + IIO_DEVICE_ATTR(out_altvoltage##_channel##_phase##_num, \ + _mode, _show, _store, _addr) + +/** + * /sys/bus/iio/devices/.../out_altvoltageX_phaseY_scale + */ + +#define IIO_CONST_ATTR_PHASE_SCALE(_channel, _string) \ + IIO_CONST_ATTR(out_altvoltage##_channel##_phase_scale, _string) + +/** + * /sys/bus/iio/devices/.../out_altvoltageX_phasesymbol + */ + +#define IIO_DEV_ATTR_PHASESYMBOL(_channel, _mode, _show, _store, _addr) \ + IIO_DEVICE_ATTR(out_altvoltage##_channel##_phasesymbol, \ + _mode, _show, _store, _addr); + +/** + * /sys/bus/iio/devices/.../out_altvoltageX_pincontrol_en + */ + +#define IIO_DEV_ATTR_PINCONTROL_EN(_channel, _mode, _show, _store, _addr)\ + IIO_DEVICE_ATTR(out_altvoltage##_channel##_pincontrol_en, \ + _mode, _show, _store, _addr); + +/** + * /sys/bus/iio/devices/.../out_altvoltageX_pincontrol_frequency_en + */ + +#define IIO_DEV_ATTR_PINCONTROL_FREQ_EN(_channel, _mode, _show, _store, _addr)\ + IIO_DEVICE_ATTR(out_altvoltage##_channel##_pincontrol_frequency_en,\ + _mode, _show, _store, _addr); + +/** + * /sys/bus/iio/devices/.../out_altvoltageX_pincontrol_phase_en + */ + +#define IIO_DEV_ATTR_PINCONTROL_PHASE_EN(_channel, _mode, _show, _store, _addr)\ + IIO_DEVICE_ATTR(out_altvoltage##_channel##_pincontrol_phase_en, \ + _mode, _show, _store, _addr); + +/** + * /sys/bus/iio/devices/.../out_altvoltageX_out_enable + */ + +#define IIO_DEV_ATTR_OUT_ENABLE(_channel, _mode, _show, _store, _addr) \ + IIO_DEVICE_ATTR(out_altvoltage##_channel##_out_enable, \ + _mode, _show, _store, _addr); + +/** + * /sys/bus/iio/devices/.../out_altvoltageX_outY_enable + */ + +#define IIO_DEV_ATTR_OUTY_ENABLE(_channel, _output, \ + _mode, _show, _store, _addr) \ + IIO_DEVICE_ATTR(out_altvoltage##_channel##_out##_output##_enable,\ + _mode, _show, _store, _addr); + +/** + * /sys/bus/iio/devices/.../out_altvoltageX_outY_wavetype + */ + +#define IIO_DEV_ATTR_OUT_WAVETYPE(_channel, _output, _store, _addr) \ + IIO_DEVICE_ATTR(out_altvoltage##_channel##_out##_output##_wavetype,\ + S_IWUSR, NULL, _store, _addr); + +/** + * /sys/bus/iio/devices/.../out_altvoltageX_outY_wavetype_available + */ + +#define IIO_CONST_ATTR_OUT_WAVETYPES_AVAILABLE(_channel, _output, _modes)\ + IIO_CONST_ATTR( \ + out_altvoltage##_channel##_out##_output##_wavetype_available, _modes); diff --git a/drivers/staging/iio/gyro/adis16060_core.c b/drivers/staging/iio/gyro/adis16060_core.c index 02cc23420b9..9931e2060e1 100644 --- a/drivers/staging/iio/gyro/adis16060_core.c +++ b/drivers/staging/iio/gyro/adis16060_core.c @@ -15,8 +15,8 @@ #include <linux/slab.h> #include <linux/sysfs.h> -#include "../iio.h" -#include "../sysfs.h" +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> #define ADIS16060_GYRO 0x20 /* Measure Angular Rate (Gyro) */ #define ADIS16060_TEMP_OUT 0x10 /* Measure Temperature */ @@ -85,7 +85,7 @@ static int adis16060_read_raw(struct iio_dev *indio_dev, int ret; switch (mask) { - case 0: + case IIO_CHAN_INFO_RAW: /* Take the iio_dev status lock */ mutex_lock(&indio_dev->mlock); ret = adis16060_spi_write(indio_dev, chan->address); @@ -120,22 +120,26 @@ static const struct iio_chan_spec adis16060_channels[] = { .type = IIO_ANGL_VEL, .modified = 1, .channel2 = IIO_MOD_Z, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, .address = ADIS16060_GYRO, }, { .type = IIO_VOLTAGE, .indexed = 1, .channel = 0, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, .address = ADIS16060_AIN1, }, { .type = IIO_VOLTAGE, .indexed = 1, .channel = 1, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, .address = ADIS16060_AIN2, }, { .type = IIO_TEMP, .indexed = 1, .channel = 0, - .info_mask = IIO_CHAN_INFO_OFFSET_SEPARATE_BIT | + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_OFFSET_SEPARATE_BIT | IIO_CHAN_INFO_SCALE_SEPARATE_BIT, .address = ADIS16060_TEMP_OUT, } @@ -148,7 +152,7 @@ static int __devinit adis16060_r_probe(struct spi_device *spi) struct iio_dev *indio_dev; /* setup the industrialio driver allocated elements */ - indio_dev = iio_allocate_device(sizeof(*st)); + indio_dev = iio_device_alloc(sizeof(*st)); if (indio_dev == NULL) { ret = -ENOMEM; goto error_ret; @@ -174,7 +178,7 @@ static int __devinit adis16060_r_probe(struct spi_device *spi) return 0; error_free_dev: - iio_free_device(indio_dev); + iio_device_free(indio_dev); error_ret: return ret; } @@ -183,7 +187,7 @@ error_ret: static int adis16060_r_remove(struct spi_device *spi) { iio_device_unregister(spi_get_drvdata(spi)); - iio_free_device(spi_get_drvdata(spi)); + iio_device_free(spi_get_drvdata(spi)); return 0; } diff --git a/drivers/staging/iio/gyro/adis16080_core.c b/drivers/staging/iio/gyro/adis16080_core.c index 1815490db8b..11f1dccd7a0 100644 --- a/drivers/staging/iio/gyro/adis16080_core.c +++ b/drivers/staging/iio/gyro/adis16080_core.c @@ -14,8 +14,8 @@ #include <linux/sysfs.h> #include <linux/module.h> -#include "../iio.h" -#include "../sysfs.h" +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> #define ADIS16080_DIN_GYRO (0 << 10) /* Gyroscope output */ #define ADIS16080_DIN_TEMP (1 << 10) /* Temperature output */ @@ -87,7 +87,7 @@ static int adis16080_read_raw(struct iio_dev *indio_dev, mutex_lock(&indio_dev->mlock); switch (mask) { - case 0: + case IIO_CHAN_INFO_RAW: ret = adis16080_spi_write(indio_dev, chan->address | ADIS16080_DIN_WRITE); @@ -110,21 +110,25 @@ static const struct iio_chan_spec adis16080_channels[] = { .type = IIO_ANGL_VEL, .modified = 1, .channel2 = IIO_MOD_Z, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, .address = ADIS16080_DIN_GYRO, }, { .type = IIO_VOLTAGE, .indexed = 1, .channel = 0, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, .address = ADIS16080_DIN_AIN1, }, { .type = IIO_VOLTAGE, .indexed = 1, .channel = 1, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, .address = ADIS16080_DIN_AIN2, }, { .type = IIO_TEMP, .indexed = 1, .channel = 0, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, .address = ADIS16080_DIN_TEMP, } }; @@ -141,7 +145,7 @@ static int __devinit adis16080_probe(struct spi_device *spi) struct iio_dev *indio_dev; /* setup the industrialio driver allocated elements */ - indio_dev = iio_allocate_device(sizeof(*st)); + indio_dev = iio_device_alloc(sizeof(*st)); if (indio_dev == NULL) { ret = -ENOMEM; goto error_ret; @@ -167,7 +171,7 @@ static int __devinit adis16080_probe(struct spi_device *spi) return 0; error_free_dev: - iio_free_device(indio_dev); + iio_device_free(indio_dev); error_ret: return ret; } @@ -176,7 +180,7 @@ error_ret: static int adis16080_remove(struct spi_device *spi) { iio_device_unregister(spi_get_drvdata(spi)); - iio_free_device(spi_get_drvdata(spi)); + iio_device_free(spi_get_drvdata(spi)); return 0; } diff --git a/drivers/staging/iio/gyro/adis16130_core.c b/drivers/staging/iio/gyro/adis16130_core.c index 947eb86f05d..bf61cd0b5bb 100644 --- a/drivers/staging/iio/gyro/adis16130_core.c +++ b/drivers/staging/iio/gyro/adis16130_core.c @@ -16,8 +16,8 @@ #include <linux/list.h> #include <linux/module.h> -#include "../iio.h" -#include "../sysfs.h" +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> #define ADIS16130_CON 0x0 #define ADIS16130_CON_RD (1 << 6) @@ -100,11 +100,13 @@ static const struct iio_chan_spec adis16130_channels[] = { .type = IIO_ANGL_VEL, .modified = 1, .channel2 = IIO_MOD_Z, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, .address = ADIS16130_RATEDATA, }, { .type = IIO_TEMP, .indexed = 1, .channel = 0, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, .address = ADIS16130_TEMPDATA, } }; @@ -121,7 +123,7 @@ static int __devinit adis16130_probe(struct spi_device *spi) struct iio_dev *indio_dev; /* setup the industrialio driver allocated elements */ - indio_dev = iio_allocate_device(sizeof(*st)); + indio_dev = iio_device_alloc(sizeof(*st)); if (indio_dev == NULL) { ret = -ENOMEM; goto error_ret; @@ -145,7 +147,7 @@ static int __devinit adis16130_probe(struct spi_device *spi) return 0; error_free_dev: - iio_free_device(indio_dev); + iio_device_free(indio_dev); error_ret: return ret; @@ -155,7 +157,7 @@ error_ret: static int adis16130_remove(struct spi_device *spi) { iio_device_unregister(spi_get_drvdata(spi)); - iio_free_device(spi_get_drvdata(spi)); + iio_device_free(spi_get_drvdata(spi)); return 0; } diff --git a/drivers/staging/iio/gyro/adis16260_core.c b/drivers/staging/iio/gyro/adis16260_core.c index 8f6af47e955..d7979cf15cd 100644 --- a/drivers/staging/iio/gyro/adis16260_core.c +++ b/drivers/staging/iio/gyro/adis16260_core.c @@ -18,9 +18,9 @@ #include <linux/list.h> #include <linux/module.h> -#include "../iio.h" -#include "../sysfs.h" -#include "../buffer.h" +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/buffer.h> #include "adis16260.h" @@ -389,30 +389,76 @@ enum adis16260_channel { }; #define ADIS16260_GYRO_CHANNEL_SET(axis, mod) \ struct iio_chan_spec adis16260_channels_##axis[] = { \ - IIO_CHAN(IIO_ANGL_VEL, 1, 0, 0, NULL, 0, mod, \ - IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT | \ - IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT | \ - IIO_CHAN_INFO_SCALE_SEPARATE_BIT, \ - gyro, ADIS16260_SCAN_GYRO, \ - IIO_ST('s', 14, 16, 0), 0), \ - IIO_CHAN(IIO_ANGL, 1, 0, 0, NULL, 0, mod, \ - 0, \ - angle, ADIS16260_SCAN_ANGL, \ - IIO_ST('u', 14, 16, 0), 0), \ - IIO_CHAN(IIO_TEMP, 0, 1, 0, NULL, 0, 0, \ - IIO_CHAN_INFO_OFFSET_SEPARATE_BIT | \ - IIO_CHAN_INFO_SCALE_SEPARATE_BIT, \ - temp, ADIS16260_SCAN_TEMP, \ - IIO_ST('u', 12, 16, 0), 0), \ - IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, "supply", 0, 0, \ - IIO_CHAN_INFO_SCALE_SEPARATE_BIT, \ - in_supply, ADIS16260_SCAN_SUPPLY, \ - IIO_ST('u', 12, 16, 0), 0), \ - IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, NULL, 1, 0, \ - IIO_CHAN_INFO_SCALE_SEPARATE_BIT, \ - in_aux, ADIS16260_SCAN_AUX_ADC, \ - IIO_ST('u', 12, 16, 0), 0), \ - IIO_CHAN_SOFT_TIMESTAMP(5) \ + { \ + .type = IIO_ANGL_VEL, \ + .modified = 1, \ + .channel2 = mod, \ + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \ + IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT | \ + IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT | \ + IIO_CHAN_INFO_SCALE_SEPARATE_BIT, \ + .address = gyro, \ + .scan_index = ADIS16260_SCAN_GYRO, \ + .scan_type = { \ + .sign = 's', \ + .realbits = 14, \ + .storagebits = 16, \ + }, \ + }, { \ + .type = IIO_ANGL, \ + .modified = 1, \ + .channel2 = mod, \ + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, \ + .address = angle, \ + .scan_index = ADIS16260_SCAN_ANGL, \ + .scan_type = { \ + .sign = 'u', \ + .realbits = 14, \ + .storagebits = 16, \ + }, \ + }, { \ + .type = IIO_TEMP, \ + .indexed = 1, \ + .channel = 0, \ + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \ + IIO_CHAN_INFO_OFFSET_SEPARATE_BIT | \ + IIO_CHAN_INFO_SCALE_SEPARATE_BIT, \ + .address = temp, \ + .scan_index = ADIS16260_SCAN_TEMP, \ + .scan_type = { \ + .sign = 'u', \ + .realbits = 12, \ + .storagebits = 16, \ + }, \ + }, { \ + .type = IIO_VOLTAGE, \ + .indexed = 1, \ + .channel = 0, \ + .extend_name = "supply", \ + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \ + IIO_CHAN_INFO_SCALE_SEPARATE_BIT, \ + .address = in_supply, \ + .scan_index = ADIS16260_SCAN_SUPPLY, \ + .scan_type = { \ + .sign = 'u', \ + .realbits = 12, \ + .storagebits = 16, \ + }, \ + }, { \ + .type = IIO_VOLTAGE, \ + .indexed = 1, \ + .channel = 1, \ + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \ + IIO_CHAN_INFO_SCALE_SEPARATE_BIT, \ + .address = in_aux, \ + .scan_index = ADIS16260_SCAN_AUX_ADC, \ + .scan_type = { \ + .sign = 'u', \ + .realbits = 12, \ + .storagebits = 16, \ + }, \ + }, \ + IIO_CHAN_SOFT_TIMESTAMP(5), \ } static const ADIS16260_GYRO_CHANNEL_SET(x, IIO_MOD_X); @@ -440,7 +486,7 @@ static int adis16260_read_raw(struct iio_dev *indio_dev, s16 val16; switch (mask) { - case 0: + case IIO_CHAN_INFO_RAW: mutex_lock(&indio_dev->mlock); addr = adis16260_addresses[chan->address][0]; ret = adis16260_spi_read_reg_16(indio_dev, addr, &val16); @@ -581,7 +627,7 @@ static int __devinit adis16260_probe(struct spi_device *spi) struct iio_dev *indio_dev; /* setup the industrialio driver allocated elements */ - indio_dev = iio_allocate_device(sizeof(*st)); + indio_dev = iio_device_alloc(sizeof(*st)); if (indio_dev == NULL) { ret = -ENOMEM; goto error_ret; @@ -666,7 +712,7 @@ error_uninitialize_ring: error_unreg_ring_funcs: adis16260_unconfigure_ring(indio_dev); error_free_dev: - iio_free_device(indio_dev); + iio_device_free(indio_dev); error_ret: return ret; } @@ -687,7 +733,7 @@ static int adis16260_remove(struct spi_device *spi) adis16260_remove_trigger(indio_dev); iio_buffer_unregister(indio_dev); adis16260_unconfigure_ring(indio_dev); - iio_free_device(indio_dev); + iio_device_free(indio_dev); err_ret: return ret; diff --git a/drivers/staging/iio/gyro/adis16260_ring.c b/drivers/staging/iio/gyro/adis16260_ring.c index 711f15122a0..25283376f2f 100644 --- a/drivers/staging/iio/gyro/adis16260_ring.c +++ b/drivers/staging/iio/gyro/adis16260_ring.c @@ -5,9 +5,9 @@ #include <linux/spi/spi.h> #include <linux/slab.h> -#include "../iio.h" +#include <linux/iio/iio.h> #include "../ring_sw.h" -#include "../trigger_consumer.h" +#include <linux/iio/trigger_consumer.h> #include "adis16260.h" /** @@ -66,9 +66,8 @@ static irqreturn_t adis16260_trigger_handler(int irq, void *p) struct iio_buffer *ring = indio_dev->buffer; int i = 0; s16 *data; - size_t datasize = ring->access->get_bytes_per_datum(ring); - data = kmalloc(datasize , GFP_KERNEL); + data = kmalloc(indio_dev->scan_bytes, GFP_KERNEL); if (data == NULL) { dev_err(&st->us->dev, "memory alloc failed in ring bh"); return -ENOMEM; @@ -81,7 +80,7 @@ static irqreturn_t adis16260_trigger_handler(int irq, void *p) data[i] = be16_to_cpup((__be16 *)&(st->rx[i*2])); /* Guaranteed to be aligned with 8 byte boundary */ - if (ring->scan_timestamp) + if (indio_dev->scan_timestamp) *((s64 *)(data + ((i + 3)/4)*4)) = pf->timestamp; ring->access->store_to(ring, (u8 *)data, pf->timestamp); diff --git a/drivers/staging/iio/gyro/adis16260_trigger.c b/drivers/staging/iio/gyro/adis16260_trigger.c index 8299cd18d70..034559e4d5b 100644 --- a/drivers/staging/iio/gyro/adis16260_trigger.c +++ b/drivers/staging/iio/gyro/adis16260_trigger.c @@ -3,8 +3,8 @@ #include <linux/spi/spi.h> #include <linux/export.h> -#include "../iio.h" -#include "../trigger.h" +#include <linux/iio/iio.h> +#include <linux/iio/trigger.h> #include "adis16260.h" /** @@ -29,7 +29,7 @@ int adis16260_probe_trigger(struct iio_dev *indio_dev) int ret; struct adis16260_state *st = iio_priv(indio_dev); - st->trig = iio_allocate_trigger("%s-dev%d", + st->trig = iio_trigger_alloc("%s-dev%d", spi_get_device_id(st->us)->name, indio_dev->id); if (st->trig == NULL) { @@ -60,7 +60,7 @@ int adis16260_probe_trigger(struct iio_dev *indio_dev) error_free_irq: free_irq(st->us->irq, st->trig); error_free_trig: - iio_free_trigger(st->trig); + iio_trigger_free(st->trig); error_ret: return ret; } @@ -71,5 +71,5 @@ void adis16260_remove_trigger(struct iio_dev *indio_dev) iio_trigger_unregister(st->trig); free_irq(st->us->irq, st->trig); - iio_free_trigger(st->trig); + iio_trigger_free(st->trig); } diff --git a/drivers/staging/iio/gyro/adxrs450_core.c b/drivers/staging/iio/gyro/adxrs450_core.c index 15e2496f70c..6513119b1e9 100644 --- a/drivers/staging/iio/gyro/adxrs450_core.c +++ b/drivers/staging/iio/gyro/adxrs450_core.c @@ -18,8 +18,8 @@ #include <linux/list.h> #include <linux/module.h> -#include "../iio.h" -#include "../sysfs.h" +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> #include "adxrs450.h" @@ -265,7 +265,7 @@ static int adxrs450_read_raw(struct iio_dev *indio_dev, s16 t; switch (mask) { - case 0: + case IIO_CHAN_INFO_RAW: switch (chan->type) { case IIO_ANGL_VEL: ret = adxrs450_spi_sensor_data(indio_dev, &t); @@ -329,14 +329,16 @@ static const struct iio_chan_spec adxrs450_channels[2][2] = { .type = IIO_ANGL_VEL, .modified = 1, .channel2 = IIO_MOD_Z, - .info_mask = IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT | + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT | IIO_CHAN_INFO_QUADRATURE_CORRECTION_RAW_SEPARATE_BIT | IIO_CHAN_INFO_SCALE_SEPARATE_BIT, }, { .type = IIO_TEMP, .indexed = 1, .channel = 0, - .info_mask = IIO_CHAN_INFO_SCALE_SEPARATE_BIT, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_SCALE_SEPARATE_BIT, } }, [ID_ADXRS453] = { @@ -344,13 +346,15 @@ static const struct iio_chan_spec adxrs450_channels[2][2] = { .type = IIO_ANGL_VEL, .modified = 1, .channel2 = IIO_MOD_Z, - .info_mask = IIO_CHAN_INFO_SCALE_SEPARATE_BIT | + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_SCALE_SEPARATE_BIT | IIO_CHAN_INFO_QUADRATURE_CORRECTION_RAW_SEPARATE_BIT, }, { .type = IIO_TEMP, .indexed = 1, .channel = 0, - .info_mask = IIO_CHAN_INFO_SCALE_SEPARATE_BIT, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_SCALE_SEPARATE_BIT, } }, }; @@ -368,7 +372,7 @@ static int __devinit adxrs450_probe(struct spi_device *spi) struct iio_dev *indio_dev; /* setup the industrialio driver allocated elements */ - indio_dev = iio_allocate_device(sizeof(*st)); + indio_dev = iio_device_alloc(sizeof(*st)); if (indio_dev == NULL) { ret = -ENOMEM; goto error_ret; @@ -399,7 +403,7 @@ static int __devinit adxrs450_probe(struct spi_device *spi) error_initial: iio_device_unregister(indio_dev); error_free_dev: - iio_free_device(indio_dev); + iio_device_free(indio_dev); error_ret: return ret; @@ -408,7 +412,7 @@ error_ret: static int adxrs450_remove(struct spi_device *spi) { iio_device_unregister(spi_get_drvdata(spi)); - iio_free_device(spi_get_drvdata(spi)); + iio_device_free(spi_get_drvdata(spi)); return 0; } diff --git a/drivers/staging/iio/iio.h b/drivers/staging/iio/iio.h deleted file mode 100644 index b9cd454f69e..00000000000 --- a/drivers/staging/iio/iio.h +++ /dev/null @@ -1,471 +0,0 @@ - -/* The industrial I/O core - * - * Copyright (c) 2008 Jonathan Cameron - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ -#ifndef _INDUSTRIAL_IO_H_ -#define _INDUSTRIAL_IO_H_ - -#include <linux/device.h> -#include <linux/cdev.h> -#include "types.h" -/* IIO TODO LIST */ -/* - * Provide means of adjusting timer accuracy. - * Currently assumes nano seconds. - */ - -enum iio_data_type { - IIO_RAW, - IIO_PROCESSED, -}; - -/* Could add the raw attributes as well - allowing buffer only devices */ -enum iio_chan_info_enum { - /* 0 is reserved for raw attributes */ - IIO_CHAN_INFO_SCALE = 1, - IIO_CHAN_INFO_OFFSET, - IIO_CHAN_INFO_CALIBSCALE, - IIO_CHAN_INFO_CALIBBIAS, - IIO_CHAN_INFO_PEAK, - IIO_CHAN_INFO_PEAK_SCALE, - IIO_CHAN_INFO_QUADRATURE_CORRECTION_RAW, - IIO_CHAN_INFO_AVERAGE_RAW, - IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY, -}; - -#define IIO_CHAN_INFO_SHARED_BIT(type) BIT(type*2) -#define IIO_CHAN_INFO_SEPARATE_BIT(type) BIT(type*2 + 1) - -#define IIO_CHAN_INFO_SCALE_SEPARATE_BIT \ - IIO_CHAN_INFO_SEPARATE_BIT(IIO_CHAN_INFO_SCALE) -#define IIO_CHAN_INFO_SCALE_SHARED_BIT \ - IIO_CHAN_INFO_SHARED_BIT(IIO_CHAN_INFO_SCALE) -#define IIO_CHAN_INFO_OFFSET_SEPARATE_BIT \ - IIO_CHAN_INFO_SEPARATE_BIT(IIO_CHAN_INFO_OFFSET) -#define IIO_CHAN_INFO_OFFSET_SHARED_BIT \ - IIO_CHAN_INFO_SHARED_BIT(IIO_CHAN_INFO_OFFSET) -#define IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT \ - IIO_CHAN_INFO_SEPARATE_BIT(IIO_CHAN_INFO_CALIBSCALE) -#define IIO_CHAN_INFO_CALIBSCALE_SHARED_BIT \ - IIO_CHAN_INFO_SHARED_BIT(IIO_CHAN_INFO_CALIBSCALE) -#define IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT \ - IIO_CHAN_INFO_SEPARATE_BIT(IIO_CHAN_INFO_CALIBBIAS) -#define IIO_CHAN_INFO_CALIBBIAS_SHARED_BIT \ - IIO_CHAN_INFO_SHARED_BIT(IIO_CHAN_INFO_CALIBBIAS) -#define IIO_CHAN_INFO_PEAK_SEPARATE_BIT \ - IIO_CHAN_INFO_SEPARATE_BIT(IIO_CHAN_INFO_PEAK) -#define IIO_CHAN_INFO_PEAK_SHARED_BIT \ - IIO_CHAN_INFO_SHARED_BIT(IIO_CHAN_INFO_PEAK) -#define IIO_CHAN_INFO_PEAKSCALE_SEPARATE_BIT \ - IIO_CHAN_INFO_SEPARATE_BIT(IIO_CHAN_INFO_PEAKSCALE) -#define IIO_CHAN_INFO_PEAKSCALE_SHARED_BIT \ - IIO_CHAN_INFO_SHARED_BIT(IIO_CHAN_INFO_PEAKSCALE) -#define IIO_CHAN_INFO_QUADRATURE_CORRECTION_RAW_SEPARATE_BIT \ - IIO_CHAN_INFO_SEPARATE_BIT( \ - IIO_CHAN_INFO_QUADRATURE_CORRECTION_RAW) -#define IIO_CHAN_INFO_QUADRATURE_CORRECTION_RAW_SHARED_BIT \ - IIO_CHAN_INFO_SHARED_BIT( \ - IIO_CHAN_INFO_QUADRATURE_CORRECTION_RAW) -#define IIO_CHAN_INFO_AVERAGE_RAW_SEPARATE_BIT \ - IIO_CHAN_INFO_SEPARATE_BIT(IIO_CHAN_INFO_AVERAGE_RAW) -#define IIO_CHAN_INFO_AVERAGE_RAW_SHARED_BIT \ - IIO_CHAN_INFO_SHARED_BIT(IIO_CHAN_INFO_AVERAGE_RAW) -#define IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT \ - IIO_CHAN_INFO_SHARED_BIT( \ - IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY) -#define IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SEPARATE_BIT \ - IIO_CHAN_INFO_SEPARATE_BIT( \ - IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY) - -enum iio_endian { - IIO_CPU, - IIO_BE, - IIO_LE, -}; - -struct iio_chan_spec; -struct iio_dev; - -/** - * struct iio_chan_spec_ext_info - Extended channel info attribute - * @name: Info attribute name - * @shared: Whether this attribute is shared between all channels. - * @read: Read callback for this info attribute, may be NULL. - * @write: Write callback for this info attribute, may be NULL. - */ -struct iio_chan_spec_ext_info { - const char *name; - bool shared; - ssize_t (*read)(struct iio_dev *, struct iio_chan_spec const *, - char *buf); - ssize_t (*write)(struct iio_dev *, struct iio_chan_spec const *, - const char *buf, size_t len); -}; - -/** - * struct iio_chan_spec - specification of a single channel - * @type: What type of measurement is the channel making. - * @channel: What number or name do we wish to assign the channel. - * @channel2: If there is a second number for a differential - * channel then this is it. If modified is set then the - * value here specifies the modifier. - * @address: Driver specific identifier. - * @scan_index: Monotonic index to give ordering in scans when read - * from a buffer. - * @scan_type: Sign: 's' or 'u' to specify signed or unsigned - * realbits: Number of valid bits of data - * storage_bits: Realbits + padding - * shift: Shift right by this before masking out - * realbits. - * endianness: little or big endian - * @info_mask: What information is to be exported about this channel. - * This includes calibbias, scale etc. - * @event_mask: What events can this channel produce. - * @ext_info: Array of extended info attributes for this channel. - * The array is NULL terminated, the last element should - * have it's name field set to NULL. - * @extend_name: Allows labeling of channel attributes with an - * informative name. Note this has no effect codes etc, - * unlike modifiers. - * @datasheet_name: A name used in in kernel mapping of channels. It should - * correspond to the first name that the channel is referred - * to by in the datasheet (e.g. IND), or the nearest - * possible compound name (e.g. IND-INC). - * @processed_val: Flag to specify the data access attribute should be - * *_input rather than *_raw. - * @modified: Does a modifier apply to this channel. What these are - * depends on the channel type. Modifier is set in - * channel2. Examples are IIO_MOD_X for axial sensors about - * the 'x' axis. - * @indexed: Specify the channel has a numerical index. If not, - * the value in channel will be suppressed for attribute - * but not for event codes. Typically set it to 0 when - * the index is false. - * @differential: Channel is differential. - */ -struct iio_chan_spec { - enum iio_chan_type type; - int channel; - int channel2; - unsigned long address; - int scan_index; - struct { - char sign; - u8 realbits; - u8 storagebits; - u8 shift; - enum iio_endian endianness; - } scan_type; - long info_mask; - long event_mask; - const struct iio_chan_spec_ext_info *ext_info; - char *extend_name; - const char *datasheet_name; - unsigned processed_val:1; - unsigned modified:1; - unsigned indexed:1; - unsigned output:1; - unsigned differential:1; -}; - -#define IIO_ST(si, rb, sb, sh) \ - { .sign = si, .realbits = rb, .storagebits = sb, .shift = sh } - -/* Macro assumes input channels */ -#define IIO_CHAN(_type, _mod, _indexed, _proc, _name, _chan, _chan2, \ - _inf_mask, _address, _si, _stype, _event_mask) \ - { .type = _type, \ - .output = 0, \ - .modified = _mod, \ - .indexed = _indexed, \ - .processed_val = _proc, \ - .extend_name = _name, \ - .channel = _chan, \ - .channel2 = _chan2, \ - .info_mask = _inf_mask, \ - .address = _address, \ - .scan_index = _si, \ - .scan_type = _stype, \ - .event_mask = _event_mask } - -#define IIO_CHAN_SOFT_TIMESTAMP(_si) \ - { .type = IIO_TIMESTAMP, .channel = -1, \ - .scan_index = _si, .scan_type = IIO_ST('s', 64, 64, 0) } - -/** - * iio_get_time_ns() - utility function to get a time stamp for events etc - **/ -static inline s64 iio_get_time_ns(void) -{ - struct timespec ts; - /* - * calls getnstimeofday. - * If hrtimers then up to ns accurate, if not microsecond. - */ - ktime_get_real_ts(&ts); - - return timespec_to_ns(&ts); -} - -/* Device operating modes */ -#define INDIO_DIRECT_MODE 0x01 -#define INDIO_BUFFER_TRIGGERED 0x02 -#define INDIO_BUFFER_HARDWARE 0x08 - -#define INDIO_ALL_BUFFER_MODES \ - (INDIO_BUFFER_TRIGGERED | INDIO_BUFFER_HARDWARE) - -struct iio_trigger; /* forward declaration */ -struct iio_dev; - -/** - * struct iio_info - constant information about device - * @driver_module: module structure used to ensure correct - * ownership of chrdevs etc - * @event_attrs: event control attributes - * @attrs: general purpose device attributes - * @read_raw: function to request a value from the device. - * mask specifies which value. Note 0 means a reading of - * the channel in question. Return value will specify the - * type of value returned by the device. val and val2 will - * contain the elements making up the returned value. - * @write_raw: function to write a value to the device. - * Parameters are the same as for read_raw. - * @write_raw_get_fmt: callback function to query the expected - * format/precision. If not set by the driver, write_raw - * returns IIO_VAL_INT_PLUS_MICRO. - * @read_event_config: find out if the event is enabled. - * @write_event_config: set if the event is enabled. - * @read_event_value: read a value associated with the event. Meaning - * is event dependant. event_code specifies which event. - * @write_event_value: write the value associated with the event. - * Meaning is event dependent. - * @validate_trigger: function to validate the trigger when the - * current trigger gets changed. - **/ -struct iio_info { - struct module *driver_module; - struct attribute_group *event_attrs; - const struct attribute_group *attrs; - - int (*read_raw)(struct iio_dev *indio_dev, - struct iio_chan_spec const *chan, - int *val, - int *val2, - long mask); - - int (*write_raw)(struct iio_dev *indio_dev, - struct iio_chan_spec const *chan, - int val, - int val2, - long mask); - - int (*write_raw_get_fmt)(struct iio_dev *indio_dev, - struct iio_chan_spec const *chan, - long mask); - - int (*read_event_config)(struct iio_dev *indio_dev, - u64 event_code); - - int (*write_event_config)(struct iio_dev *indio_dev, - u64 event_code, - int state); - - int (*read_event_value)(struct iio_dev *indio_dev, - u64 event_code, - int *val); - int (*write_event_value)(struct iio_dev *indio_dev, - u64 event_code, - int val); - int (*validate_trigger)(struct iio_dev *indio_dev, - struct iio_trigger *trig); - int (*update_scan_mode)(struct iio_dev *indio_dev, - const unsigned long *scan_mask); - int (*debugfs_reg_access)(struct iio_dev *indio_dev, - unsigned reg, unsigned writeval, - unsigned *readval); -}; - -/** - * struct iio_buffer_setup_ops - buffer setup related callbacks - * @preenable: [DRIVER] function to run prior to marking buffer enabled - * @postenable: [DRIVER] function to run after marking buffer enabled - * @predisable: [DRIVER] function to run prior to marking buffer - * disabled - * @postdisable: [DRIVER] function to run after marking buffer disabled - */ -struct iio_buffer_setup_ops { - int (*preenable)(struct iio_dev *); - int (*postenable)(struct iio_dev *); - int (*predisable)(struct iio_dev *); - int (*postdisable)(struct iio_dev *); -}; - -/** - * struct iio_dev - industrial I/O device - * @id: [INTERN] used to identify device internally - * @modes: [DRIVER] operating modes supported by device - * @currentmode: [DRIVER] current operating mode - * @dev: [DRIVER] device structure, should be assigned a parent - * and owner - * @event_interface: [INTERN] event chrdevs associated with interrupt lines - * @buffer: [DRIVER] any buffer present - * @mlock: [INTERN] lock used to prevent simultaneous device state - * changes - * @available_scan_masks: [DRIVER] optional array of allowed bitmasks - * @masklength: [INTERN] the length of the mask established from - * channels - * @active_scan_mask: [INTERN] union of all scan masks requested by buffers - * @trig: [INTERN] current device trigger (buffer modes) - * @pollfunc: [DRIVER] function run on trigger being received - * @channels: [DRIVER] channel specification structure table - * @num_channels: [DRIVER] number of chanels specified in @channels. - * @channel_attr_list: [INTERN] keep track of automatically created channel - * attributes - * @chan_attr_group: [INTERN] group for all attrs in base directory - * @name: [DRIVER] name of the device. - * @info: [DRIVER] callbacks and constant info from driver - * @info_exist_lock: [INTERN] lock to prevent use during removal - * @chrdev: [INTERN] associated character device - * @groups: [INTERN] attribute groups - * @groupcounter: [INTERN] index of next attribute group - * @flags: [INTERN] file ops related flags including busy flag. - * @debugfs_dentry: [INTERN] device specific debugfs dentry. - * @cached_reg_addr: [INTERN] cached register address for debugfs reads. - */ -struct iio_dev { - int id; - - int modes; - int currentmode; - struct device dev; - - struct iio_event_interface *event_interface; - - struct iio_buffer *buffer; - struct mutex mlock; - - const unsigned long *available_scan_masks; - unsigned masklength; - const unsigned long *active_scan_mask; - struct iio_trigger *trig; - struct iio_poll_func *pollfunc; - - struct iio_chan_spec const *channels; - int num_channels; - - struct list_head channel_attr_list; - struct attribute_group chan_attr_group; - const char *name; - const struct iio_info *info; - struct mutex info_exist_lock; - const struct iio_buffer_setup_ops *setup_ops; - struct cdev chrdev; -#define IIO_MAX_GROUPS 6 - const struct attribute_group *groups[IIO_MAX_GROUPS + 1]; - int groupcounter; - - unsigned long flags; -#if defined(CONFIG_DEBUG_FS) - struct dentry *debugfs_dentry; - unsigned cached_reg_addr; -#endif -}; - -/** - * iio_find_channel_from_si() - get channel from its scan index - * @indio_dev: device - * @si: scan index to match - */ -const struct iio_chan_spec -*iio_find_channel_from_si(struct iio_dev *indio_dev, int si); - -/** - * iio_device_register() - register a device with the IIO subsystem - * @indio_dev: Device structure filled by the device driver - **/ -int iio_device_register(struct iio_dev *indio_dev); - -/** - * iio_device_unregister() - unregister a device from the IIO subsystem - * @indio_dev: Device structure representing the device. - **/ -void iio_device_unregister(struct iio_dev *indio_dev); - -/** - * iio_push_event() - try to add event to the list for userspace reading - * @indio_dev: IIO device structure - * @ev_code: What event - * @timestamp: When the event occurred - **/ -int iio_push_event(struct iio_dev *indio_dev, u64 ev_code, s64 timestamp); - -extern struct bus_type iio_bus_type; - -/** - * iio_put_device() - reference counted deallocation of struct device - * @dev: the iio_device containing the device - **/ -static inline void iio_put_device(struct iio_dev *indio_dev) -{ - if (indio_dev) - put_device(&indio_dev->dev); -}; - -/* Can we make this smaller? */ -#define IIO_ALIGN L1_CACHE_BYTES -/** - * iio_allocate_device() - allocate an iio_dev from a driver - * @sizeof_priv: Space to allocate for private structure. - **/ -struct iio_dev *iio_allocate_device(int sizeof_priv); - -static inline void *iio_priv(const struct iio_dev *indio_dev) -{ - return (char *)indio_dev + ALIGN(sizeof(struct iio_dev), IIO_ALIGN); -} - -static inline struct iio_dev *iio_priv_to_dev(void *priv) -{ - return (struct iio_dev *)((char *)priv - - ALIGN(sizeof(struct iio_dev), IIO_ALIGN)); -} - -/** - * iio_free_device() - free an iio_dev from a driver - * @dev: the iio_dev associated with the device - **/ -void iio_free_device(struct iio_dev *indio_dev); - -/** - * iio_buffer_enabled() - helper function to test if the buffer is enabled - * @indio_dev: IIO device info structure for device - **/ -static inline bool iio_buffer_enabled(struct iio_dev *indio_dev) -{ - return indio_dev->currentmode - & (INDIO_BUFFER_TRIGGERED | INDIO_BUFFER_HARDWARE); -}; - -/** - * iio_get_debugfs_dentry() - helper function to get the debugfs_dentry - * @indio_dev: IIO device info structure for device - **/ -#if defined(CONFIG_DEBUG_FS) -static inline struct dentry *iio_get_debugfs_dentry(struct iio_dev *indio_dev) -{ - return indio_dev->debugfs_dentry; -}; -#else -static inline struct dentry *iio_get_debugfs_dentry(struct iio_dev *indio_dev) -{ - return NULL; -}; -#endif - -#endif /* _INDUSTRIAL_IO_H_ */ diff --git a/drivers/staging/iio/iio_dummy_evgen.c b/drivers/staging/iio/iio_dummy_evgen.c index f39f346bf04..0cd4fe916bf 100644 --- a/drivers/staging/iio/iio_dummy_evgen.c +++ b/drivers/staging/iio/iio_dummy_evgen.c @@ -22,8 +22,8 @@ #include <linux/sysfs.h> #include "iio_dummy_evgen.h" -#include "iio.h" -#include "sysfs.h" +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> /* Fiddly bit of faking and irq without hardware */ #define IIO_EVENTGEN_NO 10 diff --git a/drivers/staging/iio/iio_hwmon.c b/drivers/staging/iio/iio_hwmon.c index a603a5f51f9..b03554fee44 100644 --- a/drivers/staging/iio/iio_hwmon.c +++ b/drivers/staging/iio/iio_hwmon.c @@ -14,8 +14,8 @@ #include <linux/platform_device.h> #include <linux/hwmon.h> #include <linux/hwmon-sysfs.h> -#include "consumer.h" -#include "types.h" +#include <linux/iio/consumer.h> +#include <linux/iio/types.h> /** * struct iio_hwmon_state - device instance state diff --git a/drivers/staging/iio/iio_simple_dummy.c b/drivers/staging/iio/iio_simple_dummy.c index e3a94572bb4..3b4513cf5ab 100644 --- a/drivers/staging/iio/iio_simple_dummy.c +++ b/drivers/staging/iio/iio_simple_dummy.c @@ -19,10 +19,10 @@ #include <linux/module.h> #include <linux/moduleparam.h> -#include "iio.h" -#include "sysfs.h" -#include "events.h" -#include "buffer.h" +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/events.h> +#include <linux/iio/buffer.h> #include "iio_simple_dummy.h" /* @@ -73,6 +73,12 @@ static struct iio_chan_spec iio_dummy_channels[] = { /* What other information is available? */ .info_mask = /* + * in_voltage0_raw + * Raw (unscaled no bias removal etc) measurement + * from the device. + */ + IIO_CHAN_INFO_RAW_SEPARATE_BIT | + /* * in_voltage0_offset * Offset for userspace to apply prior to scale * when converting to standard units (microvolts) @@ -114,6 +120,12 @@ static struct iio_chan_spec iio_dummy_channels[] = { .channel2 = 2, .info_mask = /* + * in_voltage1-voltage2_raw + * Raw (unscaled no bias removal etc) measurement + * from the device. + */ + IIO_CHAN_INFO_RAW_SEPARATE_BIT | + /* * in_voltage-voltage_scale * Shared version of scale - shared by differential * input channels of type IIO_VOLTAGE. @@ -135,6 +147,7 @@ static struct iio_chan_spec iio_dummy_channels[] = { .channel = 3, .channel2 = 4, .info_mask = + IIO_CHAN_INFO_RAW_SEPARATE_BIT | IIO_CHAN_INFO_SCALE_SHARED_BIT, .scan_index = diffvoltage3m4, .scan_type = { @@ -154,6 +167,7 @@ static struct iio_chan_spec iio_dummy_channels[] = { /* Channel 2 is use for modifiers */ .channel2 = IIO_MOD_X, .info_mask = + IIO_CHAN_INFO_RAW_SEPARATE_BIT | /* * Internal bias correction value. Applied * by the hardware or driver prior to userspace @@ -177,6 +191,7 @@ static struct iio_chan_spec iio_dummy_channels[] = { /* DAC channel out_voltage0_raw */ { .type = IIO_VOLTAGE, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, .output = 1, .indexed = 1, .channel = 0, @@ -203,7 +218,7 @@ static int iio_dummy_read_raw(struct iio_dev *indio_dev, mutex_lock(&st->lock); switch (mask) { - case 0: /* magic value - channel value read */ + case IIO_CHAN_INFO_RAW: /* magic value - channel value read */ switch (chan->type) { case IIO_VOLTAGE: if (chan->output) { @@ -290,7 +305,7 @@ static int iio_dummy_write_raw(struct iio_dev *indio_dev, struct iio_dummy_state *st = iio_priv(indio_dev); switch (mask) { - case 0: + case IIO_CHAN_INFO_RAW: if (chan->output == 0) return -EINVAL; @@ -377,7 +392,7 @@ static int __devinit iio_dummy_probe(int index) * It also has a region (accessed by iio_priv() * for chip specific state information. */ - indio_dev = iio_allocate_device(sizeof(*st)); + indio_dev = iio_device_alloc(sizeof(*st)); if (indio_dev == NULL) { ret = -ENOMEM; goto error_ret; @@ -457,7 +472,7 @@ error_unregister_events: error_free_device: /* Note free device should only be called, before registration * has succeeded. */ - iio_free_device(indio_dev); + iio_device_free(indio_dev); error_ret: return ret; } @@ -494,7 +509,7 @@ static int iio_dummy_remove(int index) goto error_ret; /* Free all structures */ - iio_free_device(indio_dev); + iio_device_free(indio_dev); error_ret: return ret; diff --git a/drivers/staging/iio/iio_simple_dummy_buffer.c b/drivers/staging/iio/iio_simple_dummy_buffer.c index bb4daf74436..372606572d1 100644 --- a/drivers/staging/iio/iio_simple_dummy_buffer.c +++ b/drivers/staging/iio/iio_simple_dummy_buffer.c @@ -18,9 +18,9 @@ #include <linux/irq.h> #include <linux/bitmap.h> -#include "iio.h" -#include "trigger_consumer.h" -#include "kfifo_buf.h" +#include <linux/iio/iio.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/iio/kfifo_buf.h> #include "iio_simple_dummy.h" @@ -48,12 +48,9 @@ static irqreturn_t iio_simple_dummy_trigger_h(int irq, void *p) struct iio_dev *indio_dev = pf->indio_dev; struct iio_buffer *buffer = indio_dev->buffer; int len = 0; - /* - * The datasize is obtained from the buffer. It was stored when - * the preenable setup function was called. - */ - size_t datasize = buffer->access->get_bytes_per_datum(buffer); - u16 *data = kmalloc(datasize, GFP_KERNEL); + u16 *data; + + data = kmalloc(indio_dev->scan_bytes, GFP_KERNEL); if (data == NULL) return -ENOMEM; @@ -87,7 +84,7 @@ static irqreturn_t iio_simple_dummy_trigger_h(int irq, void *p) } } /* Store a timestampe at an 8 byte boundary */ - if (buffer->scan_timestamp) + if (indio_dev->scan_timestamp) *(s64 *)(((phys_addr_t)data + len + sizeof(s64) - 1) & ~(sizeof(s64) - 1)) = iio_get_time_ns(); diff --git a/drivers/staging/iio/iio_simple_dummy_events.c b/drivers/staging/iio/iio_simple_dummy_events.c index 449c7a5ece8..f85bd197ed3 100644 --- a/drivers/staging/iio/iio_simple_dummy_events.c +++ b/drivers/staging/iio/iio_simple_dummy_events.c @@ -12,9 +12,9 @@ #include <linux/interrupt.h> #include <linux/irq.h> -#include "iio.h" -#include "sysfs.h" -#include "events.h" +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/events.h> #include "iio_simple_dummy.h" /* Evgen 'fakes' interrupt events for this example */ diff --git a/drivers/staging/iio/impedance-analyzer/ad5933.c b/drivers/staging/iio/impedance-analyzer/ad5933.c index cd82b56d58a..359a794f684 100644 --- a/drivers/staging/iio/impedance-analyzer/ad5933.c +++ b/drivers/staging/iio/impedance-analyzer/ad5933.c @@ -19,9 +19,9 @@ #include <linux/module.h> #include <asm/div64.h> -#include "../iio.h" -#include "../sysfs.h" -#include "../buffer.h" +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/buffer.h> #include "../ring_sw.h" #include "ad5933.h" @@ -109,15 +109,46 @@ static struct ad5933_platform_data ad5933_default_pdata = { }; static struct iio_chan_spec ad5933_channels[] = { - IIO_CHAN(IIO_TEMP, 0, 1, 1, NULL, 0, 0, 0, - 0, AD5933_REG_TEMP_DATA, IIO_ST('s', 14, 16, 0), 0), - /* Ring Channels */ - IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, "real_raw", 0, 0, - IIO_CHAN_INFO_SCALE_SEPARATE_BIT, - AD5933_REG_REAL_DATA, 0, IIO_ST('s', 16, 16, 0), 0), - IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, "imag_raw", 0, 0, - IIO_CHAN_INFO_SCALE_SEPARATE_BIT, - AD5933_REG_IMAG_DATA, 1, IIO_ST('s', 16, 16, 0), 0), + { + .type = IIO_TEMP, + .indexed = 1, + .channel = 0, + .info_mask = IIO_CHAN_INFO_PROCESSED_SEPARATE_BIT, + .address = AD5933_REG_TEMP_DATA, + .scan_type = { + .sign = 's', + .realbits = 14, + .storagebits = 16, + }, + }, { /* Ring Channels */ + .type = IIO_VOLTAGE, + .indexed = 1, + .channel = 0, + .extend_name = "real_raw", + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_SCALE_SEPARATE_BIT, + .address = AD5933_REG_REAL_DATA, + .scan_index = 0, + .scan_type = { + .sign = 's', + .realbits = 16, + .storagebits = 16, + }, + }, { + .type = IIO_VOLTAGE, + .indexed = 1, + .channel = 0, + .extend_name = "imag_raw", + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_SCALE_SEPARATE_BIT, + .address = AD5933_REG_IMAG_DATA, + .scan_index = 1, + .scan_type = { + .sign = 's', + .realbits = 16, + .storagebits = 16, + }, + }, }; static int ad5933_i2c_write(struct i2c_client *client, @@ -495,7 +526,8 @@ static int ad5933_read_raw(struct iio_dev *indio_dev, mutex_lock(&indio_dev->mlock); switch (m) { - case 0: + case IIO_CHAN_INFO_RAW: + case IIO_CHAN_INFO_PROCESSED: if (iio_buffer_enabled(indio_dev)) { ret = -EBUSY; goto out; @@ -537,19 +569,14 @@ static const struct iio_info ad5933_info = { static int ad5933_ring_preenable(struct iio_dev *indio_dev) { struct ad5933_state *st = iio_priv(indio_dev); - size_t d_size; int ret; if (bitmap_empty(indio_dev->active_scan_mask, indio_dev->masklength)) return -EINVAL; - d_size = bitmap_weight(indio_dev->active_scan_mask, - indio_dev->masklength) * - ad5933_channels[1].scan_type.storagebits / 8; - - if (indio_dev->buffer->access->set_bytes_per_datum) - indio_dev->buffer->access-> - set_bytes_per_datum(indio_dev->buffer, d_size); + ret = iio_sw_buffer_preenable(indio_dev); + if (ret < 0) + return ret; ret = ad5933_reset(st); if (ret < 0) @@ -678,7 +705,7 @@ static int __devinit ad5933_probe(struct i2c_client *client, int ret, voltage_uv = 0; struct ad5933_platform_data *pdata = client->dev.platform_data; struct ad5933_state *st; - struct iio_dev *indio_dev = iio_allocate_device(sizeof(*st)); + struct iio_dev *indio_dev = iio_device_alloc(sizeof(*st)); if (indio_dev == NULL) return -ENOMEM; @@ -757,7 +784,7 @@ error_put_reg: if (!IS_ERR(st->reg)) regulator_put(st->reg); - iio_free_device(indio_dev); + iio_device_free(indio_dev); return ret; } @@ -774,7 +801,7 @@ static __devexit int ad5933_remove(struct i2c_client *client) regulator_disable(st->reg); regulator_put(st->reg); } - iio_free_device(indio_dev); + iio_device_free(indio_dev); return 0; } diff --git a/drivers/staging/iio/imu/adis16400_core.c b/drivers/staging/iio/imu/adis16400_core.c index e73ad7818d8..5015f823b65 100644 --- a/drivers/staging/iio/imu/adis16400_core.c +++ b/drivers/staging/iio/imu/adis16400_core.c @@ -26,9 +26,9 @@ #include <linux/list.h> #include <linux/module.h> -#include "../iio.h" -#include "../sysfs.h" -#include "../buffer.h" +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/buffer.h> #include "adis16400.h" enum adis16400_chip_variant { @@ -545,7 +545,7 @@ static int adis16400_read_raw(struct iio_dev *indio_dev, s16 val16; switch (mask) { - case 0: + case IIO_CHAN_INFO_RAW: mutex_lock(&indio_dev->mlock); ret = adis16400_spi_read_reg_16(indio_dev, adis16400_addresses[chan->address][0], @@ -635,7 +635,8 @@ static struct iio_chan_spec adis16400_channels[] = { .indexed = 1, .channel = 0, .extend_name = "supply", - .info_mask = IIO_CHAN_INFO_SCALE_SEPARATE_BIT, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_SCALE_SEPARATE_BIT, .address = in_supply, .scan_index = ADIS16400_SCAN_SUPPLY, .scan_type = IIO_ST('u', 14, 16, 0) @@ -643,7 +644,8 @@ static struct iio_chan_spec adis16400_channels[] = { .type = IIO_ANGL_VEL, .modified = 1, .channel2 = IIO_MOD_X, - .info_mask = IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT | + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT | IIO_CHAN_INFO_SCALE_SHARED_BIT | IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT, .address = gyro_x, @@ -653,7 +655,8 @@ static struct iio_chan_spec adis16400_channels[] = { .type = IIO_ANGL_VEL, .modified = 1, .channel2 = IIO_MOD_Y, - .info_mask = IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT | + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT | IIO_CHAN_INFO_SCALE_SHARED_BIT | IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT, .address = gyro_y, @@ -663,7 +666,8 @@ static struct iio_chan_spec adis16400_channels[] = { .type = IIO_ANGL_VEL, .modified = 1, .channel2 = IIO_MOD_Z, - .info_mask = IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT | + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT | IIO_CHAN_INFO_SCALE_SHARED_BIT | IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT, .address = gyro_z, @@ -673,7 +677,8 @@ static struct iio_chan_spec adis16400_channels[] = { .type = IIO_ACCEL, .modified = 1, .channel2 = IIO_MOD_X, - .info_mask = IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT | + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT | IIO_CHAN_INFO_SCALE_SHARED_BIT | IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT, .address = accel_x, @@ -683,7 +688,8 @@ static struct iio_chan_spec adis16400_channels[] = { .type = IIO_ACCEL, .modified = 1, .channel2 = IIO_MOD_Y, - .info_mask = IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT | + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT | IIO_CHAN_INFO_SCALE_SHARED_BIT | IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT, .address = accel_y, @@ -693,7 +699,8 @@ static struct iio_chan_spec adis16400_channels[] = { .type = IIO_ACCEL, .modified = 1, .channel2 = IIO_MOD_Z, - .info_mask = IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT | + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT | IIO_CHAN_INFO_SCALE_SHARED_BIT | IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT, .address = accel_z, @@ -703,7 +710,8 @@ static struct iio_chan_spec adis16400_channels[] = { .type = IIO_MAGN, .modified = 1, .channel2 = IIO_MOD_X, - .info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT | + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_SCALE_SHARED_BIT | IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT, .address = magn_x, .scan_index = ADIS16400_SCAN_MAGN_X, @@ -712,7 +720,8 @@ static struct iio_chan_spec adis16400_channels[] = { .type = IIO_MAGN, .modified = 1, .channel2 = IIO_MOD_Y, - .info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT | + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_SCALE_SHARED_BIT | IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT, .address = magn_y, .scan_index = ADIS16400_SCAN_MAGN_Y, @@ -721,7 +730,8 @@ static struct iio_chan_spec adis16400_channels[] = { .type = IIO_MAGN, .modified = 1, .channel2 = IIO_MOD_Z, - .info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT | + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_SCALE_SHARED_BIT | IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT, .address = magn_z, .scan_index = ADIS16400_SCAN_MAGN_Z, @@ -730,7 +740,8 @@ static struct iio_chan_spec adis16400_channels[] = { .type = IIO_TEMP, .indexed = 1, .channel = 0, - .info_mask = IIO_CHAN_INFO_OFFSET_SEPARATE_BIT | + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_OFFSET_SEPARATE_BIT | IIO_CHAN_INFO_SCALE_SEPARATE_BIT, .address = temp, .scan_index = ADIS16400_SCAN_TEMP, @@ -739,7 +750,8 @@ static struct iio_chan_spec adis16400_channels[] = { .type = IIO_VOLTAGE, .indexed = 1, .channel = 1, - .info_mask = IIO_CHAN_INFO_SCALE_SEPARATE_BIT, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_SCALE_SEPARATE_BIT, .address = in1, .scan_index = ADIS16400_SCAN_ADC_0, .scan_type = IIO_ST('s', 12, 16, 0), @@ -753,7 +765,8 @@ static struct iio_chan_spec adis16350_channels[] = { .indexed = 1, .channel = 0, .extend_name = "supply", - .info_mask = IIO_CHAN_INFO_SCALE_SEPARATE_BIT, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_SCALE_SEPARATE_BIT, .address = in_supply, .scan_index = ADIS16400_SCAN_SUPPLY, .scan_type = IIO_ST('u', 12, 16, 0) @@ -761,7 +774,8 @@ static struct iio_chan_spec adis16350_channels[] = { .type = IIO_ANGL_VEL, .modified = 1, .channel2 = IIO_MOD_X, - .info_mask = IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT | + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT | IIO_CHAN_INFO_SCALE_SHARED_BIT | IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT, .address = gyro_x, @@ -771,7 +785,8 @@ static struct iio_chan_spec adis16350_channels[] = { .type = IIO_ANGL_VEL, .modified = 1, .channel2 = IIO_MOD_Y, - .info_mask = IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT | + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT | IIO_CHAN_INFO_SCALE_SHARED_BIT | IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT, .address = gyro_y, @@ -781,17 +796,19 @@ static struct iio_chan_spec adis16350_channels[] = { .type = IIO_ANGL_VEL, .modified = 1, .channel2 = IIO_MOD_Z, - .info_mask = IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT | + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT | IIO_CHAN_INFO_SCALE_SHARED_BIT | IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT, .address = gyro_z, .scan_index = ADIS16400_SCAN_GYRO_Z, .scan_type = IIO_ST('s', 14, 16, 0), }, { - .type = IIO_ACCEL, + .type = IIO_ACCEL, .modified = 1, .channel2 = IIO_MOD_X, - .info_mask = IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT | + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT | IIO_CHAN_INFO_SCALE_SHARED_BIT | IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT, .address = accel_x, @@ -801,7 +818,8 @@ static struct iio_chan_spec adis16350_channels[] = { .type = IIO_ACCEL, .modified = 1, .channel2 = IIO_MOD_Y, - .info_mask = IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT | + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT | IIO_CHAN_INFO_SCALE_SHARED_BIT | IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT, .address = accel_y, @@ -811,7 +829,8 @@ static struct iio_chan_spec adis16350_channels[] = { .type = IIO_ACCEL, .modified = 1, .channel2 = IIO_MOD_Z, - .info_mask = IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT | + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT | IIO_CHAN_INFO_SCALE_SHARED_BIT | IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT, .address = accel_z, @@ -822,7 +841,8 @@ static struct iio_chan_spec adis16350_channels[] = { .indexed = 1, .channel = 0, .extend_name = "x", - .info_mask = IIO_CHAN_INFO_OFFSET_SEPARATE_BIT | + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_OFFSET_SEPARATE_BIT | IIO_CHAN_INFO_SCALE_SEPARATE_BIT | IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT, .address = temp0, @@ -833,7 +853,8 @@ static struct iio_chan_spec adis16350_channels[] = { .indexed = 1, .channel = 1, .extend_name = "y", - .info_mask = IIO_CHAN_INFO_OFFSET_SEPARATE_BIT | + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_OFFSET_SEPARATE_BIT | IIO_CHAN_INFO_SCALE_SEPARATE_BIT | IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT, .address = temp1, @@ -844,7 +865,8 @@ static struct iio_chan_spec adis16350_channels[] = { .indexed = 1, .channel = 2, .extend_name = "z", - .info_mask = IIO_CHAN_INFO_OFFSET_SEPARATE_BIT | + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_OFFSET_SEPARATE_BIT | IIO_CHAN_INFO_SCALE_SEPARATE_BIT, .address = temp2, .scan_index = ADIS16350_SCAN_TEMP_Z, @@ -853,7 +875,8 @@ static struct iio_chan_spec adis16350_channels[] = { .type = IIO_VOLTAGE, .indexed = 1, .channel = 1, - .info_mask = IIO_CHAN_INFO_SCALE_SEPARATE_BIT, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_SCALE_SEPARATE_BIT, .address = in1, .scan_index = ADIS16350_SCAN_ADC_0, .scan_type = IIO_ST('s', 12, 16, 0), @@ -867,7 +890,8 @@ static struct iio_chan_spec adis16300_channels[] = { .indexed = 1, .channel = 0, .extend_name = "supply", - .info_mask = IIO_CHAN_INFO_SCALE_SEPARATE_BIT, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_SCALE_SEPARATE_BIT, .address = in_supply, .scan_index = ADIS16400_SCAN_SUPPLY, .scan_type = IIO_ST('u', 12, 16, 0) @@ -875,7 +899,8 @@ static struct iio_chan_spec adis16300_channels[] = { .type = IIO_ANGL_VEL, .modified = 1, .channel2 = IIO_MOD_X, - .info_mask = IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT | + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT | IIO_CHAN_INFO_SCALE_SHARED_BIT | IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT, .address = gyro_x, @@ -885,7 +910,8 @@ static struct iio_chan_spec adis16300_channels[] = { .type = IIO_ACCEL, .modified = 1, .channel2 = IIO_MOD_X, - .info_mask = IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT | + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT | IIO_CHAN_INFO_SCALE_SHARED_BIT | IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT, .address = accel_x, @@ -895,7 +921,8 @@ static struct iio_chan_spec adis16300_channels[] = { .type = IIO_ACCEL, .modified = 1, .channel2 = IIO_MOD_Y, - .info_mask = IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT | + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT | IIO_CHAN_INFO_SCALE_SHARED_BIT | IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT, .address = accel_y, @@ -905,7 +932,8 @@ static struct iio_chan_spec adis16300_channels[] = { .type = IIO_ACCEL, .modified = 1, .channel2 = IIO_MOD_Z, - .info_mask = IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT | + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT | IIO_CHAN_INFO_SCALE_SHARED_BIT | IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT, .address = accel_z, @@ -915,7 +943,8 @@ static struct iio_chan_spec adis16300_channels[] = { .type = IIO_TEMP, .indexed = 1, .channel = 0, - .info_mask = IIO_CHAN_INFO_OFFSET_SEPARATE_BIT | + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_OFFSET_SEPARATE_BIT | IIO_CHAN_INFO_SCALE_SEPARATE_BIT, .address = temp, .scan_index = ADIS16400_SCAN_TEMP, @@ -924,7 +953,8 @@ static struct iio_chan_spec adis16300_channels[] = { .type = IIO_VOLTAGE, .indexed = 1, .channel = 1, - .info_mask = IIO_CHAN_INFO_SCALE_SEPARATE_BIT, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_SCALE_SEPARATE_BIT, .address = in1, .scan_index = ADIS16350_SCAN_ADC_0, .scan_type = IIO_ST('s', 12, 16, 0), @@ -932,7 +962,8 @@ static struct iio_chan_spec adis16300_channels[] = { .type = IIO_INCLI, .modified = 1, .channel2 = IIO_MOD_X, - .info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_SCALE_SHARED_BIT, .address = incli_x, .scan_index = ADIS16300_SCAN_INCLI_X, .scan_type = IIO_ST('s', 13, 16, 0), @@ -940,7 +971,8 @@ static struct iio_chan_spec adis16300_channels[] = { .type = IIO_INCLI, .modified = 1, .channel2 = IIO_MOD_Y, - .info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_SCALE_SHARED_BIT, .address = incli_y, .scan_index = ADIS16300_SCAN_INCLI_Y, .scan_type = IIO_ST('s', 13, 16, 0), @@ -953,7 +985,8 @@ static const struct iio_chan_spec adis16334_channels[] = { .type = IIO_ANGL_VEL, .modified = 1, .channel2 = IIO_MOD_X, - .info_mask = IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT | + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT | IIO_CHAN_INFO_SCALE_SHARED_BIT | IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT, .address = gyro_x, @@ -963,7 +996,8 @@ static const struct iio_chan_spec adis16334_channels[] = { .type = IIO_ANGL_VEL, .modified = 1, .channel2 = IIO_MOD_Y, - .info_mask = IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT | + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT | IIO_CHAN_INFO_SCALE_SHARED_BIT | IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT, .address = gyro_y, @@ -973,7 +1007,8 @@ static const struct iio_chan_spec adis16334_channels[] = { .type = IIO_ANGL_VEL, .modified = 1, .channel2 = IIO_MOD_Z, - .info_mask = IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT | + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT | IIO_CHAN_INFO_SCALE_SHARED_BIT | IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT, .address = gyro_z, @@ -983,7 +1018,8 @@ static const struct iio_chan_spec adis16334_channels[] = { .type = IIO_ACCEL, .modified = 1, .channel2 = IIO_MOD_X, - .info_mask = IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT | + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT | IIO_CHAN_INFO_SCALE_SHARED_BIT | IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT, .address = accel_x, @@ -993,7 +1029,8 @@ static const struct iio_chan_spec adis16334_channels[] = { .type = IIO_ACCEL, .modified = 1, .channel2 = IIO_MOD_Y, - .info_mask = IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT | + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT | IIO_CHAN_INFO_SCALE_SHARED_BIT | IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT, .address = accel_y, @@ -1003,7 +1040,8 @@ static const struct iio_chan_spec adis16334_channels[] = { .type = IIO_ACCEL, .modified = 1, .channel2 = IIO_MOD_Z, - .info_mask = IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT | + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT | IIO_CHAN_INFO_SCALE_SHARED_BIT | IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT, .address = accel_z, @@ -1013,7 +1051,8 @@ static const struct iio_chan_spec adis16334_channels[] = { .type = IIO_TEMP, .indexed = 1, .channel = 0, - .info_mask = IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT | + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT | IIO_CHAN_INFO_SCALE_SHARED_BIT, .address = accel_z, .scan_index = ADIS16400_SCAN_ACC_Z, @@ -1122,7 +1161,7 @@ static int __devinit adis16400_probe(struct spi_device *spi) { int ret; struct adis16400_state *st; - struct iio_dev *indio_dev = iio_allocate_device(sizeof(*st)); + struct iio_dev *indio_dev = iio_device_alloc(sizeof(*st)); if (indio_dev == NULL) { ret = -ENOMEM; goto error_ret; @@ -1172,14 +1211,14 @@ static int __devinit adis16400_probe(struct spi_device *spi) return 0; error_remove_trigger: - if (indio_dev->modes & INDIO_BUFFER_TRIGGERED) + if (spi->irq) adis16400_remove_trigger(indio_dev); error_uninitialize_ring: iio_buffer_unregister(indio_dev); error_unreg_ring_funcs: adis16400_unconfigure_ring(indio_dev); error_free_dev: - iio_free_device(indio_dev); + iio_device_free(indio_dev); error_ret: return ret; } @@ -1198,7 +1237,7 @@ static int adis16400_remove(struct spi_device *spi) adis16400_remove_trigger(indio_dev); iio_buffer_unregister(indio_dev); adis16400_unconfigure_ring(indio_dev); - iio_free_device(indio_dev); + iio_device_free(indio_dev); return 0; diff --git a/drivers/staging/iio/imu/adis16400_ring.c b/drivers/staging/iio/imu/adis16400_ring.c index 8daa038b23e..e43c0e2f43a 100644 --- a/drivers/staging/iio/imu/adis16400_ring.c +++ b/drivers/staging/iio/imu/adis16400_ring.c @@ -6,9 +6,9 @@ #include <linux/bitops.h> #include <linux/export.h> -#include "../iio.h" +#include <linux/iio/iio.h> #include "../ring_sw.h" -#include "../trigger_consumer.h" +#include <linux/iio/trigger_consumer.h> #include "adis16400.h" /** @@ -119,12 +119,12 @@ static irqreturn_t adis16400_trigger_handler(int irq, void *p) struct iio_buffer *ring = indio_dev->buffer; int i = 0, j, ret = 0; s16 *data; - size_t datasize = ring->access->get_bytes_per_datum(ring); + /* Asumption that long is enough for maximum channels */ unsigned long mask = *indio_dev->active_scan_mask; int scan_count = bitmap_weight(indio_dev->active_scan_mask, indio_dev->masklength); - data = kmalloc(datasize , GFP_KERNEL); + data = kmalloc(indio_dev->scan_bytes, GFP_KERNEL); if (data == NULL) { dev_err(&st->us->dev, "memory alloc failed in ring bh"); return -ENOMEM; diff --git a/drivers/staging/iio/imu/adis16400_trigger.c b/drivers/staging/iio/imu/adis16400_trigger.c index 5bf00075752..42a678e92fc 100644 --- a/drivers/staging/iio/imu/adis16400_trigger.c +++ b/drivers/staging/iio/imu/adis16400_trigger.c @@ -3,8 +3,8 @@ #include <linux/spi/spi.h> #include <linux/export.h> -#include "../iio.h" -#include "../trigger.h" +#include <linux/iio/iio.h> +#include <linux/iio/trigger.h> #include "adis16400.h" /** @@ -29,7 +29,7 @@ int adis16400_probe_trigger(struct iio_dev *indio_dev) int ret; struct adis16400_state *st = iio_priv(indio_dev); - st->trig = iio_allocate_trigger("%s-dev%d", + st->trig = iio_trigger_alloc("%s-dev%d", indio_dev->name, indio_dev->id); if (st->trig == NULL) { @@ -59,7 +59,7 @@ int adis16400_probe_trigger(struct iio_dev *indio_dev) error_free_irq: free_irq(st->us->irq, st->trig); error_free_trig: - iio_free_trigger(st->trig); + iio_trigger_free(st->trig); error_ret: return ret; } @@ -70,5 +70,5 @@ void adis16400_remove_trigger(struct iio_dev *indio_dev) iio_trigger_unregister(st->trig); free_irq(st->us->irq, st->trig); - iio_free_trigger(st->trig); + iio_trigger_free(st->trig); } diff --git a/drivers/staging/iio/kfifo_buf.h b/drivers/staging/iio/kfifo_buf.h deleted file mode 100644 index 9f7da016af0..00000000000 --- a/drivers/staging/iio/kfifo_buf.h +++ /dev/null @@ -1,8 +0,0 @@ - -#include <linux/kfifo.h> -#include "iio.h" -#include "buffer.h" - -struct iio_buffer *iio_kfifo_allocate(struct iio_dev *indio_dev); -void iio_kfifo_free(struct iio_buffer *r); - diff --git a/drivers/staging/iio/light/Kconfig b/drivers/staging/iio/light/Kconfig index e7e9159d989..4bed30eac3e 100644 --- a/drivers/staging/iio/light/Kconfig +++ b/drivers/staging/iio/light/Kconfig @@ -4,15 +4,26 @@ menu "Light sensors" config SENSORS_ISL29018 - tristate "ISL 29018 light and proximity sensor" - depends on I2C - default n - help - If you say yes here you get support for ambient light sensing and - proximity infrared sensing from Intersil ISL29018. - This driver will provide the measurements of ambient light intensity - in lux, proximity infrared sensing and normal infrared sensing. - Data from sensor is accessible via sysfs. + tristate "ISL 29018 light and proximity sensor" + depends on I2C + select REGMAP_I2C + default n + help + If you say yes here you get support for ambient light sensing and + proximity infrared sensing from Intersil ISL29018. + This driver will provide the measurements of ambient light intensity + in lux, proximity infrared sensing and normal infrared sensing. + Data from sensor is accessible via sysfs. + +config SENSORS_ISL29028 + tristate "Intersil ISL29028 Concurrent Light and Proximity Sensor" + depends on I2C + select REGMAP_I2C + help + Provides driver for the Intersil's ISL29028 device. + This driver supports the sysfs interface to get the ALS, IR intensity, + Proximity value via iio. The ISL29028 provides the concurrent sensing + of ambient light and proximity. config SENSORS_TSL2563 tristate "TAOS TSL2560, TSL2561, TSL2562 and TSL2563 ambient light sensors" @@ -31,4 +42,12 @@ config TSL2583 Provides support for the TAOS tsl2580, tsl2581 and tsl2583 devices. Access ALS data via iio, sysfs. +config TSL2x7x + tristate "TAOS TSL/TMD2x71 and TSL/TMD2x72 Family of light and proximity sensors" + depends on I2C + help + Support for: tsl2571, tsl2671, tmd2671, tsl2771, tmd2771, tsl2572, tsl2672, + tmd2672, tsl2772, tmd2772 devices. + Provides iio_events and direct access via sysfs. + endmenu diff --git a/drivers/staging/iio/light/Makefile b/drivers/staging/iio/light/Makefile index 3011fbfa8dc..141af1eb164 100644 --- a/drivers/staging/iio/light/Makefile +++ b/drivers/staging/iio/light/Makefile @@ -4,4 +4,6 @@ obj-$(CONFIG_SENSORS_TSL2563) += tsl2563.o obj-$(CONFIG_SENSORS_ISL29018) += isl29018.o +obj-$(CONFIG_SENSORS_ISL29028) += isl29028.o obj-$(CONFIG_TSL2583) += tsl2583.o +obj-$(CONFIG_TSL2x7x) += tsl2x7x_core.o diff --git a/drivers/staging/iio/light/isl29018.c b/drivers/staging/iio/light/isl29018.c index 38ec52b65df..2d23c6afa28 100644 --- a/drivers/staging/iio/light/isl29018.c +++ b/drivers/staging/iio/light/isl29018.c @@ -26,9 +26,11 @@ #include <linux/err.h> #include <linux/mutex.h> #include <linux/delay.h> +#include <linux/regmap.h> #include <linux/slab.h> -#include "../iio.h" -#include "../sysfs.h" +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> + #define CONVERSION_TIME_MS 100 #define ISL29018_REG_ADD_COMMAND1 0x00 @@ -51,49 +53,22 @@ #define ISL29018_REG_ADD_DATA_LSB 0x02 #define ISL29018_REG_ADD_DATA_MSB 0x03 -#define ISL29018_MAX_REGS (ISL29018_REG_ADD_DATA_MSB+1) #define ISL29018_REG_TEST 0x08 #define ISL29018_TEST_SHIFT 0 #define ISL29018_TEST_MASK (0xFF << ISL29018_TEST_SHIFT) struct isl29018_chip { - struct i2c_client *client; + struct device *dev; + struct regmap *regmap; struct mutex lock; unsigned int lux_scale; unsigned int range; unsigned int adc_bit; int prox_scheme; - u8 reg_cache[ISL29018_MAX_REGS]; }; -static int isl29018_write_data(struct i2c_client *client, u8 reg, - u8 val, u8 mask, u8 shift) -{ - u8 regval = val; - int ret; - struct isl29018_chip *chip = iio_priv(i2c_get_clientdata(client)); - - /* don't cache or mask REG_TEST */ - if (reg < ISL29018_MAX_REGS) { - regval = chip->reg_cache[reg]; - regval &= ~mask; - regval |= val << shift; - } - - ret = i2c_smbus_write_byte_data(client, reg, regval); - if (ret) { - dev_err(&client->dev, "Write to device fails status %x\n", ret); - } else { - /* don't update cache on err */ - if (reg < ISL29018_MAX_REGS) - chip->reg_cache[reg] = regval; - } - - return ret; -} - -static int isl29018_set_range(struct i2c_client *client, unsigned long range, +static int isl29018_set_range(struct isl29018_chip *chip, unsigned long range, unsigned int *new_range) { static const unsigned long supp_ranges[] = {1000, 4000, 16000, 64000}; @@ -109,11 +84,11 @@ static int isl29018_set_range(struct i2c_client *client, unsigned long range, if (i >= ARRAY_SIZE(supp_ranges)) return -EINVAL; - return isl29018_write_data(client, ISL29018_REG_ADD_COMMANDII, - i, COMMANDII_RANGE_MASK, COMMANDII_RANGE_SHIFT); + return regmap_update_bits(chip->regmap, ISL29018_REG_ADD_COMMANDII, + COMMANDII_RANGE_MASK, i << COMMANDII_RANGE_SHIFT); } -static int isl29018_set_resolution(struct i2c_client *client, +static int isl29018_set_resolution(struct isl29018_chip *chip, unsigned long adcbit, unsigned int *conf_adc_bit) { static const unsigned long supp_adcbit[] = {16, 12, 8, 4}; @@ -129,48 +104,49 @@ static int isl29018_set_resolution(struct i2c_client *client, if (i >= ARRAY_SIZE(supp_adcbit)) return -EINVAL; - return isl29018_write_data(client, ISL29018_REG_ADD_COMMANDII, - i, COMMANDII_RESOLUTION_MASK, - COMMANDII_RESOLUTION_SHIFT); + return regmap_update_bits(chip->regmap, ISL29018_REG_ADD_COMMANDII, + COMMANDII_RESOLUTION_MASK, + i << COMMANDII_RESOLUTION_SHIFT); } -static int isl29018_read_sensor_input(struct i2c_client *client, int mode) +static int isl29018_read_sensor_input(struct isl29018_chip *chip, int mode) { int status; - int lsb; - int msb; + unsigned int lsb; + unsigned int msb; /* Set mode */ - status = isl29018_write_data(client, ISL29018_REG_ADD_COMMAND1, - mode, COMMMAND1_OPMODE_MASK, COMMMAND1_OPMODE_SHIFT); + status = regmap_write(chip->regmap, ISL29018_REG_ADD_COMMAND1, + mode << COMMMAND1_OPMODE_SHIFT); if (status) { - dev_err(&client->dev, "Error in setting operating mode\n"); + dev_err(chip->dev, + "Error in setting operating mode err %d\n", status); return status; } msleep(CONVERSION_TIME_MS); - lsb = i2c_smbus_read_byte_data(client, ISL29018_REG_ADD_DATA_LSB); - if (lsb < 0) { - dev_err(&client->dev, "Error in reading LSB DATA\n"); - return lsb; + status = regmap_read(chip->regmap, ISL29018_REG_ADD_DATA_LSB, &lsb); + if (status < 0) { + dev_err(chip->dev, + "Error in reading LSB DATA with err %d\n", status); + return status; } - msb = i2c_smbus_read_byte_data(client, ISL29018_REG_ADD_DATA_MSB); - if (msb < 0) { - dev_err(&client->dev, "Error in reading MSB DATA\n"); - return msb; + status = regmap_read(chip->regmap, ISL29018_REG_ADD_DATA_MSB, &msb); + if (status < 0) { + dev_err(chip->dev, + "Error in reading MSB DATA with error %d\n", status); + return status; } - dev_vdbg(&client->dev, "MSB 0x%x and LSB 0x%x\n", msb, lsb); + dev_vdbg(chip->dev, "MSB 0x%x and LSB 0x%x\n", msb, lsb); return (msb << 8) | lsb; } -static int isl29018_read_lux(struct i2c_client *client, int *lux) +static int isl29018_read_lux(struct isl29018_chip *chip, int *lux) { int lux_data; - struct isl29018_chip *chip = iio_priv(i2c_get_clientdata(client)); - lux_data = isl29018_read_sensor_input(client, - COMMMAND1_OPMODE_ALS_ONCE); + lux_data = isl29018_read_sensor_input(chip, COMMMAND1_OPMODE_ALS_ONCE); if (lux_data < 0) return lux_data; @@ -180,11 +156,11 @@ static int isl29018_read_lux(struct i2c_client *client, int *lux) return 0; } -static int isl29018_read_ir(struct i2c_client *client, int *ir) +static int isl29018_read_ir(struct isl29018_chip *chip, int *ir) { int ir_data; - ir_data = isl29018_read_sensor_input(client, COMMMAND1_OPMODE_IR_ONCE); + ir_data = isl29018_read_sensor_input(chip, COMMMAND1_OPMODE_IR_ONCE); if (ir_data < 0) return ir_data; @@ -194,7 +170,7 @@ static int isl29018_read_ir(struct i2c_client *client, int *ir) return 0; } -static int isl29018_read_proximity_ir(struct i2c_client *client, int scheme, +static int isl29018_read_proximity_ir(struct isl29018_chip *chip, int scheme, int *near_ir) { int status; @@ -202,14 +178,15 @@ static int isl29018_read_proximity_ir(struct i2c_client *client, int scheme, int ir_data = -1; /* Do proximity sensing with required scheme */ - status = isl29018_write_data(client, ISL29018_REG_ADD_COMMANDII, - scheme, COMMANDII_SCHEME_MASK, COMMANDII_SCHEME_SHIFT); + status = regmap_update_bits(chip->regmap, ISL29018_REG_ADD_COMMANDII, + COMMANDII_SCHEME_MASK, + scheme << COMMANDII_SCHEME_SHIFT); if (status) { - dev_err(&client->dev, "Error in setting operating mode\n"); + dev_err(chip->dev, "Error in setting operating mode\n"); return status; } - prox_data = isl29018_read_sensor_input(client, + prox_data = isl29018_read_sensor_input(chip, COMMMAND1_OPMODE_PROX_ONCE); if (prox_data < 0) return prox_data; @@ -219,8 +196,7 @@ static int isl29018_read_proximity_ir(struct i2c_client *client, int scheme, return 0; } - ir_data = isl29018_read_sensor_input(client, - COMMMAND1_OPMODE_IR_ONCE); + ir_data = isl29018_read_sensor_input(chip, COMMMAND1_OPMODE_IR_ONCE); if (ir_data < 0) return ir_data; @@ -249,7 +225,6 @@ static ssize_t store_range(struct device *dev, { struct iio_dev *indio_dev = dev_get_drvdata(dev); struct isl29018_chip *chip = iio_priv(indio_dev); - struct i2c_client *client = chip->client; int status; unsigned long lval; unsigned int new_range; @@ -264,10 +239,11 @@ static ssize_t store_range(struct device *dev, } mutex_lock(&chip->lock); - status = isl29018_set_range(client, lval, &new_range); + status = isl29018_set_range(chip, lval, &new_range); if (status < 0) { mutex_unlock(&chip->lock); - dev_err(dev, "Error in setting max range\n"); + dev_err(dev, + "Error in setting max range with err %d\n", status); return status; } chip->range = new_range; @@ -291,7 +267,6 @@ static ssize_t store_resolution(struct device *dev, { struct iio_dev *indio_dev = dev_get_drvdata(dev); struct isl29018_chip *chip = iio_priv(indio_dev); - struct i2c_client *client = chip->client; int status; unsigned long lval; unsigned int new_adc_bit; @@ -304,7 +279,7 @@ static ssize_t store_resolution(struct device *dev, } mutex_lock(&chip->lock); - status = isl29018_set_resolution(client, lval, &new_adc_bit); + status = isl29018_set_resolution(chip, lval, &new_adc_bit); if (status < 0) { mutex_unlock(&chip->lock); dev_err(dev, "Error in setting resolution\n"); @@ -379,20 +354,20 @@ static int isl29018_read_raw(struct iio_dev *indio_dev, { int ret = -EINVAL; struct isl29018_chip *chip = iio_priv(indio_dev); - struct i2c_client *client = chip->client; mutex_lock(&chip->lock); switch (mask) { - case 0: + case IIO_CHAN_INFO_RAW: + case IIO_CHAN_INFO_PROCESSED: switch (chan->type) { case IIO_LIGHT: - ret = isl29018_read_lux(client, val); + ret = isl29018_read_lux(chip, val); break; case IIO_INTENSITY: - ret = isl29018_read_ir(client, val); + ret = isl29018_read_ir(chip, val); break; case IIO_PROXIMITY: - ret = isl29018_read_proximity_ir(client, + ret = isl29018_read_proximity_ir(chip, chip->prox_scheme, val); break; default: @@ -419,15 +394,17 @@ static const struct iio_chan_spec isl29018_channels[] = { .type = IIO_LIGHT, .indexed = 1, .channel = 0, - .processed_val = IIO_PROCESSED, - .info_mask = IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT, + .info_mask = IIO_CHAN_INFO_PROCESSED_SEPARATE_BIT | + IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT, }, { .type = IIO_INTENSITY, .modified = 1, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, .channel2 = IIO_MOD_LIGHT_IR, }, { /* Unindexed in current ABI. But perhaps it should be. */ .type = IIO_PROXIMITY, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, } }; @@ -456,15 +433,12 @@ static const struct attribute_group isl29108_group = { .attrs = isl29018_attributes, }; -static int isl29018_chip_init(struct i2c_client *client) +static int isl29018_chip_init(struct isl29018_chip *chip) { - struct isl29018_chip *chip = iio_priv(i2c_get_clientdata(client)); int status; int new_adc_bit; unsigned int new_range; - memset(chip->reg_cache, 0, sizeof(chip->reg_cache)); - /* Code added per Intersil Application Note 1534: * When VDD sinks to approximately 1.8V or below, some of * the part's registers may change their state. When VDD @@ -485,10 +459,9 @@ static int isl29018_chip_init(struct i2c_client *client) * the same thing EXCEPT the data sheet asks for a 1ms delay after * writing the CMD1 register. */ - status = isl29018_write_data(client, ISL29018_REG_TEST, 0, - ISL29018_TEST_MASK, ISL29018_TEST_SHIFT); + status = regmap_write(chip->regmap, ISL29018_REG_TEST, 0x0); if (status < 0) { - dev_err(&client->dev, "Failed to clear isl29018 TEST reg." + dev_err(chip->dev, "Failed to clear isl29018 TEST reg." "(%d)\n", status); return status; } @@ -497,10 +470,9 @@ static int isl29018_chip_init(struct i2c_client *client) * "Operating Mode" (COMMAND1) register is reprogrammed when * data is read from the device. */ - status = isl29018_write_data(client, ISL29018_REG_ADD_COMMAND1, 0, - 0xff, 0); + status = regmap_write(chip->regmap, ISL29018_REG_ADD_COMMAND1, 0); if (status < 0) { - dev_err(&client->dev, "Failed to clear isl29018 CMD1 reg." + dev_err(chip->dev, "Failed to clear isl29018 CMD1 reg." "(%d)\n", status); return status; } @@ -508,13 +480,13 @@ static int isl29018_chip_init(struct i2c_client *client) msleep(1); /* per data sheet, page 10 */ /* set defaults */ - status = isl29018_set_range(client, chip->range, &new_range); + status = isl29018_set_range(chip, chip->range, &new_range); if (status < 0) { - dev_err(&client->dev, "Init of isl29018 fails\n"); + dev_err(chip->dev, "Init of isl29018 fails\n"); return status; } - status = isl29018_set_resolution(client, chip->adc_bit, + status = isl29018_set_resolution(chip, chip->adc_bit, &new_adc_bit); return 0; @@ -527,6 +499,32 @@ static const struct iio_info isl29108_info = { .write_raw = &isl29018_write_raw, }; +static bool is_volatile_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case ISL29018_REG_ADD_DATA_LSB: + case ISL29018_REG_ADD_DATA_MSB: + case ISL29018_REG_ADD_COMMAND1: + case ISL29018_REG_TEST: + return true; + default: + return false; + } +} + +/* + * isl29018_regmap_config: regmap configuration. + * Use RBTREE mechanism for caching. + */ +static const struct regmap_config isl29018_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .volatile_reg = is_volatile_reg, + .max_register = ISL29018_REG_TEST, + .num_reg_defaults_raw = ISL29018_REG_TEST + 1, + .cache_type = REGCACHE_RBTREE, +}; + static int __devinit isl29018_probe(struct i2c_client *client, const struct i2c_device_id *id) { @@ -534,7 +532,7 @@ static int __devinit isl29018_probe(struct i2c_client *client, struct iio_dev *indio_dev; int err; - indio_dev = iio_allocate_device(sizeof(*chip)); + indio_dev = iio_device_alloc(sizeof(*chip)); if (indio_dev == NULL) { dev_err(&client->dev, "iio allocation fails\n"); err = -ENOMEM; @@ -543,7 +541,7 @@ static int __devinit isl29018_probe(struct i2c_client *client, chip = iio_priv(indio_dev); i2c_set_clientdata(client, indio_dev); - chip->client = client; + chip->dev = &client->dev; mutex_init(&chip->lock); @@ -551,7 +549,14 @@ static int __devinit isl29018_probe(struct i2c_client *client, chip->range = 1000; chip->adc_bit = 16; - err = isl29018_chip_init(client); + chip->regmap = devm_regmap_init_i2c(client, &isl29018_regmap_config); + if (IS_ERR(chip->regmap)) { + err = PTR_ERR(chip->regmap); + dev_err(chip->dev, "regmap initialization failed: %d\n", err); + goto exit; + } + + err = isl29018_chip_init(chip); if (err) goto exit_iio_free; @@ -569,7 +574,7 @@ static int __devinit isl29018_probe(struct i2c_client *client, return 0; exit_iio_free: - iio_free_device(indio_dev); + iio_device_free(indio_dev); exit: return err; } @@ -580,7 +585,7 @@ static int __devexit isl29018_remove(struct i2c_client *client) dev_dbg(&client->dev, "%s()\n", __func__); iio_device_unregister(indio_dev); - iio_free_device(indio_dev); + iio_device_free(indio_dev); return 0; } @@ -593,7 +598,7 @@ static const struct i2c_device_id isl29018_id[] = { MODULE_DEVICE_TABLE(i2c, isl29018_id); static const struct of_device_id isl29018_of_match[] = { - { .compatible = "invn,isl29018", }, + { .compatible = "isil,isl29018", }, { }, }; MODULE_DEVICE_TABLE(of, isl29018_of_match); diff --git a/drivers/staging/iio/light/isl29028.c b/drivers/staging/iio/light/isl29028.c new file mode 100644 index 00000000000..33a4c3f94a1 --- /dev/null +++ b/drivers/staging/iio/light/isl29028.c @@ -0,0 +1,566 @@ +/* + * IIO driver for the light sensor ISL29028. + * ISL29028 is Concurrent Ambient Light and Proximity Sensor + * + * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/err.h> +#include <linux/mutex.h> +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/regmap.h> +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> + +#define CONVERSION_TIME_MS 100 + +#define ISL29028_REG_CONFIGURE 0x01 + +#define CONFIGURE_ALS_IR_MODE_ALS 0 +#define CONFIGURE_ALS_IR_MODE_IR BIT(0) +#define CONFIGURE_ALS_IR_MODE_MASK BIT(0) + +#define CONFIGURE_ALS_RANGE_LOW_LUX 0 +#define CONFIGURE_ALS_RANGE_HIGH_LUX BIT(1) +#define CONFIGURE_ALS_RANGE_MASK BIT(1) + +#define CONFIGURE_ALS_DIS 0 +#define CONFIGURE_ALS_EN BIT(2) +#define CONFIGURE_ALS_EN_MASK BIT(2) + +#define CONFIGURE_PROX_DRIVE BIT(3) + +#define CONFIGURE_PROX_SLP_SH 4 +#define CONFIGURE_PROX_SLP_MASK (7 << CONFIGURE_PROX_SLP_SH) + +#define CONFIGURE_PROX_EN BIT(7) +#define CONFIGURE_PROX_EN_MASK BIT(7) + +#define ISL29028_REG_INTERRUPT 0x02 + +#define ISL29028_REG_PROX_DATA 0x08 +#define ISL29028_REG_ALSIR_L 0x09 +#define ISL29028_REG_ALSIR_U 0x0A + +#define ISL29028_REG_TEST1_MODE 0x0E +#define ISL29028_REG_TEST2_MODE 0x0F + +#define ISL29028_NUM_REGS (ISL29028_REG_TEST2_MODE + 1) + +enum als_ir_mode { + MODE_NONE = 0, + MODE_ALS, + MODE_IR +}; + +struct isl29028_chip { + struct device *dev; + struct mutex lock; + struct regmap *regmap; + + unsigned int prox_sampling; + bool enable_prox; + + int lux_scale; + int als_ir_mode; +}; + +static int isl29028_set_proxim_sampling(struct isl29028_chip *chip, + unsigned int sampling) +{ + static unsigned int prox_period[] = {800, 400, 200, 100, 75, 50, 12, 0}; + int sel; + unsigned int period = DIV_ROUND_UP(1000, sampling); + + for (sel = 0; sel < ARRAY_SIZE(prox_period); ++sel) { + if (period >= prox_period[sel]) + break; + } + return regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE, + CONFIGURE_PROX_SLP_MASK, sel << CONFIGURE_PROX_SLP_SH); +} + +static int isl29028_enable_proximity(struct isl29028_chip *chip, bool enable) +{ + int ret; + int val = 0; + + if (enable) + val = CONFIGURE_PROX_EN; + ret = regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE, + CONFIGURE_PROX_EN_MASK, val); + if (ret < 0) + return ret; + + /* Wait for conversion to be complete for first sample */ + mdelay(DIV_ROUND_UP(1000, chip->prox_sampling)); + return 0; +} + +static int isl29028_set_als_scale(struct isl29028_chip *chip, int lux_scale) +{ + int val = (lux_scale == 2000) ? CONFIGURE_ALS_RANGE_HIGH_LUX : + CONFIGURE_ALS_RANGE_LOW_LUX; + + return regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE, + CONFIGURE_ALS_RANGE_MASK, val); +} + +static int isl29028_set_als_ir_mode(struct isl29028_chip *chip, + enum als_ir_mode mode) +{ + int ret = 0; + + switch (mode) { + case MODE_ALS: + ret = regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE, + CONFIGURE_ALS_IR_MODE_MASK, CONFIGURE_ALS_IR_MODE_ALS); + if (ret < 0) + return ret; + + ret = regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE, + CONFIGURE_ALS_RANGE_MASK, CONFIGURE_ALS_RANGE_HIGH_LUX); + break; + + case MODE_IR: + ret = regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE, + CONFIGURE_ALS_IR_MODE_MASK, CONFIGURE_ALS_IR_MODE_IR); + break; + + case MODE_NONE: + return regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE, + CONFIGURE_ALS_EN_MASK, CONFIGURE_ALS_DIS); + } + + if (ret < 0) + return ret; + + /* Enable the ALS/IR */ + ret = regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE, + CONFIGURE_ALS_EN_MASK, CONFIGURE_ALS_EN); + if (ret < 0) + return ret; + + /* Need to wait for conversion time if ALS/IR mode enabled */ + mdelay(CONVERSION_TIME_MS); + return 0; +} + +static int isl29028_read_als_ir(struct isl29028_chip *chip, int *als_ir) +{ + unsigned int lsb; + unsigned int msb; + int ret; + + ret = regmap_read(chip->regmap, ISL29028_REG_ALSIR_L, &lsb); + if (ret < 0) { + dev_err(chip->dev, + "Error in reading register ALSIR_L err %d\n", ret); + return ret; + } + + ret = regmap_read(chip->regmap, ISL29028_REG_ALSIR_U, &msb); + if (ret < 0) { + dev_err(chip->dev, + "Error in reading register ALSIR_U err %d\n", ret); + return ret; + } + + *als_ir = ((msb & 0xF) << 8) | (lsb & 0xFF); + return 0; +} + +static int isl29028_read_proxim(struct isl29028_chip *chip, int *prox) +{ + unsigned int data; + int ret; + + ret = regmap_read(chip->regmap, ISL29028_REG_PROX_DATA, &data); + if (ret < 0) { + dev_err(chip->dev, "Error in reading register %d, error %d\n", + ISL29028_REG_PROX_DATA, ret); + return ret; + } + *prox = data; + return 0; +} + +static int isl29028_proxim_get(struct isl29028_chip *chip, int *prox_data) +{ + int ret; + + if (!chip->enable_prox) { + ret = isl29028_enable_proximity(chip, true); + if (ret < 0) + return ret; + chip->enable_prox = true; + } + return isl29028_read_proxim(chip, prox_data); +} + +static int isl29028_als_get(struct isl29028_chip *chip, int *als_data) +{ + int ret; + int als_ir_data; + + if (chip->als_ir_mode != MODE_ALS) { + ret = isl29028_set_als_ir_mode(chip, MODE_ALS); + if (ret < 0) { + dev_err(chip->dev, + "Error in enabling ALS mode err %d\n", ret); + return ret; + } + chip->als_ir_mode = MODE_ALS; + } + + ret = isl29028_read_als_ir(chip, &als_ir_data); + if (ret < 0) + return ret; + + /* + * convert als data count to lux. + * if lux_scale = 125, lux = count * 0.031 + * if lux_scale = 2000, lux = count * 0.49 + */ + if (chip->lux_scale == 125) + als_ir_data = (als_ir_data * 31) / 1000; + else + als_ir_data = (als_ir_data * 49) / 100; + + *als_data = als_ir_data; + return 0; +} + +static int isl29028_ir_get(struct isl29028_chip *chip, int *ir_data) +{ + int ret; + + if (chip->als_ir_mode != MODE_IR) { + ret = isl29028_set_als_ir_mode(chip, MODE_IR); + if (ret < 0) { + dev_err(chip->dev, + "Error in enabling IR mode err %d\n", ret); + return ret; + } + chip->als_ir_mode = MODE_IR; + } + return isl29028_read_als_ir(chip, ir_data); +} + +/* Channel IO */ +static int isl29028_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int val, int val2, long mask) +{ + struct isl29028_chip *chip = iio_priv(indio_dev); + int ret = -EINVAL; + + mutex_lock(&chip->lock); + switch (chan->type) { + case IIO_PROXIMITY: + if (mask != IIO_CHAN_INFO_SAMP_FREQ) { + dev_err(chip->dev, + "proximity: mask value 0x%08lx not supported\n", + mask); + break; + } + if (val < 1 || val > 100) { + dev_err(chip->dev, + "Samp_freq %d is not in range[1:100]\n", val); + break; + } + ret = isl29028_set_proxim_sampling(chip, val); + if (ret < 0) { + dev_err(chip->dev, + "Setting proximity samp_freq fail, err %d\n", + ret); + break; + } + chip->prox_sampling = val; + break; + + case IIO_LIGHT: + if (mask != IIO_CHAN_INFO_SCALE) { + dev_err(chip->dev, + "light: mask value 0x%08lx not supported\n", + mask); + break; + } + if ((val != 125) && (val != 2000)) { + dev_err(chip->dev, + "lux scale %d is invalid [125, 2000]\n", val); + break; + } + ret = isl29028_set_als_scale(chip, val); + if (ret < 0) { + dev_err(chip->dev, + "Setting lux scale fail with error %d\n", ret); + break; + } + chip->lux_scale = val; + break; + + default: + dev_err(chip->dev, "Unsupported channel type\n"); + break; + } + mutex_unlock(&chip->lock); + return ret; +} + +static int isl29028_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int *val, int *val2, long mask) +{ + struct isl29028_chip *chip = iio_priv(indio_dev); + int ret = -EINVAL; + + mutex_lock(&chip->lock); + switch (mask) { + case IIO_CHAN_INFO_RAW: + case IIO_CHAN_INFO_PROCESSED: + switch (chan->type) { + case IIO_LIGHT: + ret = isl29028_als_get(chip, val); + break; + case IIO_INTENSITY: + ret = isl29028_ir_get(chip, val); + break; + case IIO_PROXIMITY: + ret = isl29028_proxim_get(chip, val); + break; + default: + break; + } + if (ret < 0) + break; + ret = IIO_VAL_INT; + break; + + case IIO_CHAN_INFO_SAMP_FREQ: + if (chan->type != IIO_PROXIMITY) + break; + *val = chip->prox_sampling; + ret = IIO_VAL_INT; + break; + + case IIO_CHAN_INFO_SCALE: + if (chan->type != IIO_LIGHT) + break; + *val = chip->lux_scale; + ret = IIO_VAL_INT; + break; + + default: + dev_err(chip->dev, "mask value 0x%08lx not supported\n", mask); + break; + } + mutex_unlock(&chip->lock); + return ret; +} + +static IIO_CONST_ATTR(in_proximity_sampling_frequency_available, + "1, 3, 5, 10, 13, 20, 83, 100"); +static IIO_CONST_ATTR(in_illuminance_scale_available, "125, 2000"); + +#define ISL29028_DEV_ATTR(name) (&iio_dev_attr_##name.dev_attr.attr) +#define ISL29028_CONST_ATTR(name) (&iio_const_attr_##name.dev_attr.attr) +static struct attribute *isl29028_attributes[] = { + ISL29028_CONST_ATTR(in_proximity_sampling_frequency_available), + ISL29028_CONST_ATTR(in_illuminance_scale_available), + NULL, +}; + +static const struct attribute_group isl29108_group = { + .attrs = isl29028_attributes, +}; + +static const struct iio_chan_spec isl29028_channels[] = { + { + .type = IIO_LIGHT, + .info_mask = IIO_CHAN_INFO_PROCESSED_SEPARATE_BIT | + IIO_CHAN_INFO_SCALE_SEPARATE_BIT, + }, { + .type = IIO_INTENSITY, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, + }, { + .type = IIO_PROXIMITY, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_SAMP_FREQ_SEPARATE_BIT, + } +}; + +static const struct iio_info isl29028_info = { + .attrs = &isl29108_group, + .driver_module = THIS_MODULE, + .read_raw = &isl29028_read_raw, + .write_raw = &isl29028_write_raw, +}; + +static int isl29028_chip_init(struct isl29028_chip *chip) +{ + int ret; + + chip->enable_prox = false; + chip->prox_sampling = 20; + chip->lux_scale = 2000; + chip->als_ir_mode = MODE_NONE; + + ret = regmap_write(chip->regmap, ISL29028_REG_TEST1_MODE, 0x0); + if (ret < 0) { + dev_err(chip->dev, "%s(): write to reg %d failed, err = %d\n", + __func__, ISL29028_REG_TEST1_MODE, ret); + return ret; + } + ret = regmap_write(chip->regmap, ISL29028_REG_TEST2_MODE, 0x0); + if (ret < 0) { + dev_err(chip->dev, "%s(): write to reg %d failed, err = %d\n", + __func__, ISL29028_REG_TEST2_MODE, ret); + return ret; + } + + ret = regmap_write(chip->regmap, ISL29028_REG_CONFIGURE, 0x0); + if (ret < 0) { + dev_err(chip->dev, "%s(): write to reg %d failed, err = %d\n", + __func__, ISL29028_REG_CONFIGURE, ret); + return ret; + } + + ret = isl29028_set_proxim_sampling(chip, chip->prox_sampling); + if (ret < 0) { + dev_err(chip->dev, "%s(): setting the proximity, err = %d\n", + __func__, ret); + return ret; + } + + ret = isl29028_set_als_scale(chip, chip->lux_scale); + if (ret < 0) + dev_err(chip->dev, "%s(): setting als scale failed, err = %d\n", + __func__, ret); + return ret; +} + +static bool is_volatile_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case ISL29028_REG_INTERRUPT: + case ISL29028_REG_PROX_DATA: + case ISL29028_REG_ALSIR_L: + case ISL29028_REG_ALSIR_U: + return true; + default: + return false; + } +} + +static const struct regmap_config isl29028_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .volatile_reg = is_volatile_reg, + .max_register = ISL29028_NUM_REGS - 1, + .num_reg_defaults_raw = ISL29028_NUM_REGS, + .cache_type = REGCACHE_RBTREE, +}; + +static int __devinit isl29028_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct isl29028_chip *chip; + struct iio_dev *indio_dev; + int ret; + + indio_dev = iio_device_alloc(sizeof(*chip)); + if (!indio_dev) { + dev_err(&client->dev, "iio allocation fails\n"); + return -ENOMEM; + } + + chip = iio_priv(indio_dev); + + i2c_set_clientdata(client, indio_dev); + chip->dev = &client->dev; + mutex_init(&chip->lock); + + chip->regmap = devm_regmap_init_i2c(client, &isl29028_regmap_config); + if (IS_ERR(chip->regmap)) { + ret = PTR_ERR(chip->regmap); + dev_err(chip->dev, "regmap initialization failed: %d\n", ret); + goto exit_iio_free; + } + + ret = isl29028_chip_init(chip); + if (ret < 0) { + dev_err(chip->dev, "chip initialization failed: %d\n", ret); + goto exit_iio_free; + } + + indio_dev->info = &isl29028_info; + indio_dev->channels = isl29028_channels; + indio_dev->num_channels = ARRAY_SIZE(isl29028_channels); + indio_dev->name = id->name; + indio_dev->dev.parent = &client->dev; + indio_dev->modes = INDIO_DIRECT_MODE; + ret = iio_device_register(indio_dev); + if (ret < 0) { + dev_err(chip->dev, "iio registration fails with error %d\n", + ret); + goto exit_iio_free; + } + return 0; + +exit_iio_free: + iio_device_free(indio_dev); + return ret; +} + +static int __devexit isl29028_remove(struct i2c_client *client) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(client); + + iio_device_unregister(indio_dev); + iio_device_free(indio_dev); + return 0; +} + +static const struct i2c_device_id isl29028_id[] = { + {"isl29028", 0}, + {} +}; +MODULE_DEVICE_TABLE(i2c, isl29028_id); + +static const struct of_device_id isl29028_of_match[] = { + { .compatible = "isil,isl29028", }, + { }, +}; +MODULE_DEVICE_TABLE(of, isl29028_of_match); + +static struct i2c_driver isl29028_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "isl29028", + .owner = THIS_MODULE, + .of_match_table = isl29028_of_match, + }, + .probe = isl29028_probe, + .remove = __devexit_p(isl29028_remove), + .id_table = isl29028_id, +}; + +module_i2c_driver(isl29028_driver); + +MODULE_DESCRIPTION("ISL29028 Ambient Light and Proximity Sensor driver"); +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>"); diff --git a/drivers/staging/iio/light/tsl2563.c b/drivers/staging/iio/light/tsl2563.c index 546c95a4ea9..9d740be43a8 100644 --- a/drivers/staging/iio/light/tsl2563.c +++ b/drivers/staging/iio/light/tsl2563.c @@ -35,9 +35,9 @@ #include <linux/err.h> #include <linux/slab.h> -#include "../iio.h" -#include "../sysfs.h" -#include "../events.h" +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/events.h> #include "tsl2563.h" /* Use this many bits for fraction part. */ @@ -465,7 +465,7 @@ static int tsl2563_write_raw(struct iio_dev *indio_dev, { struct tsl2563_chip *chip = iio_priv(indio_dev); - if (chan->channel == 0) + if (chan->channel == IIO_MOD_LIGHT_BOTH) chip->calib0 = calib_from_sysfs(val); else chip->calib1 = calib_from_sysfs(val); @@ -485,7 +485,8 @@ static int tsl2563_read_raw(struct iio_dev *indio_dev, mutex_lock(&chip->lock); switch (m) { - case 0: + case IIO_CHAN_INFO_RAW: + case IIO_CHAN_INFO_PROCESSED: switch (chan->type) { case IIO_LIGHT: ret = tsl2563_get_adc(chip); @@ -534,12 +535,14 @@ static const struct iio_chan_spec tsl2563_channels[] = { { .type = IIO_LIGHT, .indexed = 1, + .info_mask = IIO_CHAN_INFO_PROCESSED_SEPARATE_BIT, .channel = 0, }, { .type = IIO_INTENSITY, .modified = 1, .channel2 = IIO_MOD_LIGHT_BOTH, - .info_mask = IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT, .event_mask = (IIO_EV_BIT(IIO_EV_TYPE_THRESH, IIO_EV_DIR_RISING) | IIO_EV_BIT(IIO_EV_TYPE_THRESH, @@ -548,7 +551,8 @@ static const struct iio_chan_spec tsl2563_channels[] = { .type = IIO_INTENSITY, .modified = 1, .channel2 = IIO_MOD_LIGHT_IR, - .info_mask = IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT, } }; @@ -710,7 +714,7 @@ static int __devinit tsl2563_probe(struct i2c_client *client, int err = 0; u8 id = 0; - indio_dev = iio_allocate_device(sizeof(*chip)); + indio_dev = iio_device_alloc(sizeof(*chip)); if (!indio_dev) return -ENOMEM; @@ -797,7 +801,7 @@ fail2: if (client->irq) free_irq(client->irq, indio_dev); fail1: - iio_free_device(indio_dev); + iio_device_free(indio_dev); return err; } @@ -818,7 +822,7 @@ static int tsl2563_remove(struct i2c_client *client) if (client->irq) free_irq(client->irq, indio_dev); - iio_free_device(indio_dev); + iio_device_free(indio_dev); return 0; } diff --git a/drivers/staging/iio/light/tsl2583.c b/drivers/staging/iio/light/tsl2583.c index 8671d98e044..5ff391e8c18 100644 --- a/drivers/staging/iio/light/tsl2583.c +++ b/drivers/staging/iio/light/tsl2583.c @@ -28,7 +28,7 @@ #include <linux/unistd.h> #include <linux/slab.h> #include <linux/module.h> -#include "../iio.h" +#include <linux/iio/iio.h> #define TSL258X_MAX_DEVICE_REGS 32 @@ -815,7 +815,7 @@ static int __devinit taos_probe(struct i2c_client *clientp, return -EOPNOTSUPP; } - indio_dev = iio_allocate_device(sizeof(*chip)); + indio_dev = iio_device_alloc(sizeof(*chip)); if (indio_dev == NULL) { ret = -ENOMEM; dev_err(&clientp->dev, "iio allocation failed\n"); @@ -879,7 +879,7 @@ static int __devinit taos_probe(struct i2c_client *clientp, dev_info(&clientp->dev, "Light sensor found.\n"); return 0; fail1: - iio_free_device(indio_dev); + iio_device_free(indio_dev); fail2: return ret; } @@ -926,7 +926,7 @@ static SIMPLE_DEV_PM_OPS(taos_pm_ops, taos_suspend, taos_resume); static int __devexit taos_remove(struct i2c_client *client) { iio_device_unregister(i2c_get_clientdata(client)); - iio_free_device(i2c_get_clientdata(client)); + iio_device_free(i2c_get_clientdata(client)); return 0; } diff --git a/drivers/staging/iio/light/tsl2x7x.h b/drivers/staging/iio/light/tsl2x7x.h new file mode 100755 index 00000000000..c4acf5ff179 --- /dev/null +++ b/drivers/staging/iio/light/tsl2x7x.h @@ -0,0 +1,100 @@ +/* + * Device driver for monitoring ambient light intensity (lux) + * and proximity (prox) within the TAOS TSL2X7X family of devices. + * + * Copyright (c) 2012, TAOS Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + */ + +#ifndef __TSL2X7X_H +#define __TSL2X7X_H +#include <linux/pm.h> + +/* Max number of segments allowable in LUX table */ +#define TSL2X7X_MAX_LUX_TABLE_SIZE 9 +#define MAX_DEFAULT_TABLE_BYTES (sizeof(int) * TSL2X7X_MAX_LUX_TABLE_SIZE) + +struct iio_dev; + +struct tsl2x7x_lux { + unsigned int ratio; + unsigned int ch0; + unsigned int ch1; +}; + +/** + * struct tsl2x7x_default_settings - power on defaults unless + * overridden by platform data. + * @als_time: ALS Integration time - multiple of 50mS + * @als_gain: Index into the ALS gain table. + * @als_gain_trim: default gain trim to account for + * aperture effects. + * @wait_time: Time between PRX and ALS cycles + * in 2.7 periods + * @prx_time: 5.2ms prox integration time - + * decrease in 2.7ms periods + * @prx_gain: Proximity gain index + * @prox_config: Prox configuration filters. + * @als_cal_target: Known external ALS reading for + * calibration. + * @interrupts_en: Enable/Disable - 0x00 = none, 0x10 = als, + * 0x20 = prx, 0x30 = bth + * @persistence: H/W Filters, Number of 'out of limits' + * ADC readings PRX/ALS. + * @als_thresh_low: CH0 'low' count to trigger interrupt. + * @als_thresh_high: CH0 'high' count to trigger interrupt. + * @prox_thres_low: Low threshold proximity detection. + * @prox_thres_high: High threshold proximity detection + * @prox_pulse_count: Number if proximity emitter pulses + * @prox_max_samples_cal: Used for prox cal. + */ +struct tsl2x7x_settings { + int als_time; + int als_gain; + int als_gain_trim; + int wait_time; + int prx_time; + int prox_gain; + int prox_config; + int als_cal_target; + u8 interrupts_en; + u8 persistence; + int als_thresh_low; + int als_thresh_high; + int prox_thres_low; + int prox_thres_high; + int prox_pulse_count; + int prox_max_samples_cal; +}; + +/** + * struct tsl2X7X_platform_data - Platform callback, glass and defaults + * @platform_power: Suspend/resume platform callback + * @power_on: Power on callback + * @power_off: Power off callback + * @platform_lux_table: Device specific glass coefficents + * @platform_default_settings: Device specific power on defaults + * + */ +struct tsl2X7X_platform_data { + int (*platform_power)(struct device *dev, pm_message_t); + int (*power_on) (struct iio_dev *indio_dev); + int (*power_off) (struct i2c_client *dev); + struct tsl2x7x_lux platform_lux_table[TSL2X7X_MAX_LUX_TABLE_SIZE]; + struct tsl2x7x_settings *platform_default_settings; +}; + +#endif /* __TSL2X7X_H */ diff --git a/drivers/staging/iio/light/tsl2x7x_core.c b/drivers/staging/iio/light/tsl2x7x_core.c new file mode 100755 index 00000000000..efbc4d27e79 --- /dev/null +++ b/drivers/staging/iio/light/tsl2x7x_core.c @@ -0,0 +1,2082 @@ +/* + * Device driver for monitoring ambient light intensity in (lux) + * and proximity detection (prox) within the TAOS TSL2X7X family of devices. + * + * Copyright (c) 2012, TAOS Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + */ + +#include <linux/kernel.h> +#include <linux/i2c.h> +#include <linux/errno.h> +#include <linux/delay.h> +#include <linux/mutex.h> +#include <linux/interrupt.h> +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/version.h> +#include <linux/iio/events.h> +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include "tsl2x7x.h" + +/* Cal defs*/ +#define PROX_STAT_CAL 0 +#define PROX_STAT_SAMP 1 +#define MAX_SAMPLES_CAL 200 + +/* TSL2X7X Device ID */ +#define TRITON_ID 0x00 +#define SWORDFISH_ID 0x30 +#define HALIBUT_ID 0x20 + +/* Lux calculation constants */ +#define TSL2X7X_LUX_CALC_OVER_FLOW 65535 + +/* TAOS Register definitions - note: + * depending on device, some of these register are not used and the + * register address is benign. + */ +/* 2X7X register offsets */ +#define TSL2X7X_MAX_CONFIG_REG 16 + +/* Device Registers and Masks */ +#define TSL2X7X_CNTRL 0x00 +#define TSL2X7X_ALS_TIME 0X01 +#define TSL2X7X_PRX_TIME 0x02 +#define TSL2X7X_WAIT_TIME 0x03 +#define TSL2X7X_ALS_MINTHRESHLO 0X04 +#define TSL2X7X_ALS_MINTHRESHHI 0X05 +#define TSL2X7X_ALS_MAXTHRESHLO 0X06 +#define TSL2X7X_ALS_MAXTHRESHHI 0X07 +#define TSL2X7X_PRX_MINTHRESHLO 0X08 +#define TSL2X7X_PRX_MINTHRESHHI 0X09 +#define TSL2X7X_PRX_MAXTHRESHLO 0X0A +#define TSL2X7X_PRX_MAXTHRESHHI 0X0B +#define TSL2X7X_PERSISTENCE 0x0C +#define TSL2X7X_PRX_CONFIG 0x0D +#define TSL2X7X_PRX_COUNT 0x0E +#define TSL2X7X_GAIN 0x0F +#define TSL2X7X_NOTUSED 0x10 +#define TSL2X7X_REVID 0x11 +#define TSL2X7X_CHIPID 0x12 +#define TSL2X7X_STATUS 0x13 +#define TSL2X7X_ALS_CHAN0LO 0x14 +#define TSL2X7X_ALS_CHAN0HI 0x15 +#define TSL2X7X_ALS_CHAN1LO 0x16 +#define TSL2X7X_ALS_CHAN1HI 0x17 +#define TSL2X7X_PRX_LO 0x18 +#define TSL2X7X_PRX_HI 0x19 + +/* tsl2X7X cmd reg masks */ +#define TSL2X7X_CMD_REG 0x80 +#define TSL2X7X_CMD_SPL_FN 0x60 + +#define TSL2X7X_CMD_PROX_INT_CLR 0X05 +#define TSL2X7X_CMD_ALS_INT_CLR 0x06 +#define TSL2X7X_CMD_PROXALS_INT_CLR 0X07 + +/* tsl2X7X cntrl reg masks */ +#define TSL2X7X_CNTL_ADC_ENBL 0x02 +#define TSL2X7X_CNTL_PWR_ON 0x01 + +/* tsl2X7X status reg masks */ +#define TSL2X7X_STA_ADC_VALID 0x01 +#define TSL2X7X_STA_PRX_VALID 0x02 +#define TSL2X7X_STA_ADC_PRX_VALID (TSL2X7X_STA_ADC_VALID |\ + TSL2X7X_STA_PRX_VALID) +#define TSL2X7X_STA_ALS_INTR 0x10 +#define TSL2X7X_STA_PRX_INTR 0x20 + +/* tsl2X7X cntrl reg masks */ +#define TSL2X7X_CNTL_REG_CLEAR 0x00 +#define TSL2X7X_CNTL_PROX_INT_ENBL 0X20 +#define TSL2X7X_CNTL_ALS_INT_ENBL 0X10 +#define TSL2X7X_CNTL_WAIT_TMR_ENBL 0X08 +#define TSL2X7X_CNTL_PROX_DET_ENBL 0X04 +#define TSL2X7X_CNTL_PWRON 0x01 +#define TSL2X7X_CNTL_ALSPON_ENBL 0x03 +#define TSL2X7X_CNTL_INTALSPON_ENBL 0x13 +#define TSL2X7X_CNTL_PROXPON_ENBL 0x0F +#define TSL2X7X_CNTL_INTPROXPON_ENBL 0x2F + +/*Prox diode to use */ +#define TSL2X7X_DIODE0 0x10 +#define TSL2X7X_DIODE1 0x20 +#define TSL2X7X_DIODE_BOTH 0x30 + +/* LED Power */ +#define TSL2X7X_mA100 0x00 +#define TSL2X7X_mA50 0x40 +#define TSL2X7X_mA25 0x80 +#define TSL2X7X_mA13 0xD0 +#define TSL2X7X_MAX_TIMER_CNT (0xFF) + +/*Common device IIO EventMask */ +#define TSL2X7X_EVENT_MASK \ + (IIO_EV_BIT(IIO_EV_TYPE_THRESH, IIO_EV_DIR_RISING) | \ + IIO_EV_BIT(IIO_EV_TYPE_THRESH, IIO_EV_DIR_FALLING)), + +#define TSL2X7X_MIN_ITIME 3 + +/* TAOS txx2x7x Device family members */ +enum { + tsl2571, + tsl2671, + tmd2671, + tsl2771, + tmd2771, + tsl2572, + tsl2672, + tmd2672, + tsl2772, + tmd2772 +}; + +enum { + TSL2X7X_CHIP_UNKNOWN = 0, + TSL2X7X_CHIP_WORKING = 1, + TSL2X7X_CHIP_SUSPENDED = 2 +}; + +struct tsl2x7x_parse_result { + int integer; + int fract; +}; + +/* Per-device data */ +struct tsl2x7x_als_info { + u16 als_ch0; + u16 als_ch1; + u16 lux; +}; + +struct tsl2x7x_prox_stat { + int min; + int max; + int mean; + unsigned long stddev; +}; + +struct tsl2x7x_chip_info { + int chan_table_elements; + struct iio_chan_spec channel[4]; + const struct iio_info *info; +}; + +struct tsl2X7X_chip { + kernel_ulong_t id; + struct mutex prox_mutex; + struct mutex als_mutex; + struct i2c_client *client; + u16 prox_data; + struct tsl2x7x_als_info als_cur_info; + struct tsl2x7x_settings tsl2x7x_settings; + struct tsl2X7X_platform_data *pdata; + int als_time_scale; + int als_saturation; + int tsl2x7x_chip_status; + u8 tsl2x7x_config[TSL2X7X_MAX_CONFIG_REG]; + const struct tsl2x7x_chip_info *chip_info; + const struct iio_info *info; + s64 event_timestamp; + /* This structure is intentionally large to accommodate + * updates via sysfs. */ + /* Sized to 9 = max 8 segments + 1 termination segment */ + struct tsl2x7x_lux tsl2x7x_device_lux[TSL2X7X_MAX_LUX_TABLE_SIZE]; +}; + +/* Different devices require different coefficents */ +static const struct tsl2x7x_lux tsl2x71_lux_table[] = { + { 14461, 611, 1211 }, + { 18540, 352, 623 }, + { 0, 0, 0 }, +}; + +static const struct tsl2x7x_lux tmd2x71_lux_table[] = { + { 11635, 115, 256 }, + { 15536, 87, 179 }, + { 0, 0, 0 }, +}; + +static const struct tsl2x7x_lux tsl2x72_lux_table[] = { + { 14013, 466, 917 }, + { 18222, 310, 552 }, + { 0, 0, 0 }, +}; + +static const struct tsl2x7x_lux tmd2x72_lux_table[] = { + { 13218, 130, 262 }, + { 17592, 92, 169 }, + { 0, 0, 0 }, +}; + +static const struct tsl2x7x_lux *tsl2x7x_default_lux_table_group[] = { + [tsl2571] = tsl2x71_lux_table, + [tsl2671] = tsl2x71_lux_table, + [tmd2671] = tmd2x71_lux_table, + [tsl2771] = tsl2x71_lux_table, + [tmd2771] = tmd2x71_lux_table, + [tsl2572] = tsl2x72_lux_table, + [tsl2672] = tsl2x72_lux_table, + [tmd2672] = tmd2x72_lux_table, + [tsl2772] = tsl2x72_lux_table, + [tmd2772] = tmd2x72_lux_table, +}; + +static const struct tsl2x7x_settings tsl2x7x_default_settings = { + .als_time = 219, /* 101 ms */ + .als_gain = 0, + .prx_time = 254, /* 5.4 ms */ + .prox_gain = 1, + .wait_time = 245, + .prox_config = 0, + .als_gain_trim = 1000, + .als_cal_target = 150, + .als_thresh_low = 200, + .als_thresh_high = 256, + .persistence = 255, + .interrupts_en = 0, + .prox_thres_low = 0, + .prox_thres_high = 512, + .prox_max_samples_cal = 30, + .prox_pulse_count = 8 +}; + +static const s16 tsl2X7X_als_gainadj[] = { + 1, + 8, + 16, + 120 +}; + +static const s16 tsl2X7X_prx_gainadj[] = { + 1, + 2, + 4, + 8 +}; + +/* Channel variations */ +enum { + ALS, + PRX, + ALSPRX, + PRX2, + ALSPRX2, +}; + +static const u8 device_channel_config[] = { + ALS, + PRX, + PRX, + ALSPRX, + ALSPRX, + ALS, + PRX2, + PRX2, + ALSPRX2, + ALSPRX2 +}; + +/** + * tsl2x7x_parse_buffer() - parse a decimal result from a buffer. + * @*buf: pointer to char buffer to parse + * @*result: pointer to buffer to contain + * resulting interger / decimal as ints. + * + */ +static int +tsl2x7x_parse_buffer(const char *buf, struct tsl2x7x_parse_result *result) +{ + int integer = 0, fract = 0, fract_mult = 100000; + bool integer_part = true, negative = false; + + if (buf[0] == '-') { + negative = true; + buf++; + } + + while (*buf) { + if ('0' <= *buf && *buf <= '9') { + if (integer_part) + integer = integer*10 + *buf - '0'; + else { + fract += fract_mult*(*buf - '0'); + if (fract_mult == 1) + break; + fract_mult /= 10; + } + } else if (*buf == '\n') { + if (*(buf + 1) == '\0') + break; + else + return -EINVAL; + } else if (*buf == '.') { + integer_part = false; + } else { + return -EINVAL; + } + buf++; + } + if (negative) { + if (integer) + integer = -integer; + else + fract = -fract; + } + + result->integer = integer; + result->fract = fract; + + return 0; +} + +/** + * tsl2x7x_i2c_read() - Read a byte from a register. + * @client: i2c client + * @reg: device register to read from + * @*val: pointer to location to store register contents. + * + */ +static int +tsl2x7x_i2c_read(struct i2c_client *client, u8 reg, u8 *val) +{ + int ret = 0; + + /* select register to write */ + ret = i2c_smbus_write_byte(client, (TSL2X7X_CMD_REG | reg)); + if (ret < 0) { + dev_err(&client->dev, "%s: failed to write register %x\n" + , __func__, reg); + return ret; + } + + /* read the data */ + ret = i2c_smbus_read_byte(client); + if (ret >= 0) + *val = (u8)ret; + else + dev_err(&client->dev, "%s: failed to read register %x\n" + , __func__, reg); + + return ret; +} + +/** + * tsl2x7x_get_lux() - Reads and calculates current lux value. + * @indio_dev: pointer to IIO device + * + * The raw ch0 and ch1 values of the ambient light sensed in the last + * integration cycle are read from the device. + * Time scale factor array values are adjusted based on the integration time. + * The raw values are multiplied by a scale factor, and device gain is obtained + * using gain index. Limit checks are done next, then the ratio of a multiple + * of ch1 value, to the ch0 value, is calculated. Array tsl2x7x_device_lux[] + * is then scanned to find the first ratio value that is just above the ratio + * we just calculated. The ch0 and ch1 multiplier constants in the array are + * then used along with the time scale factor array values, to calculate the + * lux. + */ +static int tsl2x7x_get_lux(struct iio_dev *indio_dev) +{ + u16 ch0, ch1; /* separated ch0/ch1 data from device */ + u32 lux; /* raw lux calculated from device data */ + u64 lux64; + u32 ratio; + u8 buf[4]; + struct tsl2x7x_lux *p; + struct tsl2X7X_chip *chip = iio_priv(indio_dev); + int i, ret; + u32 ch0lux = 0; + u32 ch1lux = 0; + + if (mutex_trylock(&chip->als_mutex) == 0) + return chip->als_cur_info.lux; /* busy, so return LAST VALUE */ + + if (chip->tsl2x7x_chip_status != TSL2X7X_CHIP_WORKING) { + /* device is not enabled */ + dev_err(&chip->client->dev, "%s: device is not enabled\n", + __func__); + ret = -EBUSY ; + goto out_unlock; + } + + ret = tsl2x7x_i2c_read(chip->client, + (TSL2X7X_CMD_REG | TSL2X7X_STATUS), &buf[0]); + if (ret < 0) { + dev_err(&chip->client->dev, + "%s: Failed to read STATUS Reg\n", __func__); + goto out_unlock; + } + /* is data new & valid */ + if (!(buf[0] & TSL2X7X_STA_ADC_VALID)) { + dev_err(&chip->client->dev, + "%s: data not valid yet\n", __func__); + ret = chip->als_cur_info.lux; /* return LAST VALUE */ + goto out_unlock; + } + + for (i = 0; i < 4; i++) { + ret = tsl2x7x_i2c_read(chip->client, + (TSL2X7X_CMD_REG | (TSL2X7X_ALS_CHAN0LO + i)), + &buf[i]); + if (ret < 0) { + dev_err(&chip->client->dev, + "%s: failed to read. err=%x\n", __func__, ret); + goto out_unlock; + } + } + + /* clear any existing interrupt status */ + ret = i2c_smbus_write_byte(chip->client, + (TSL2X7X_CMD_REG | + TSL2X7X_CMD_SPL_FN | + TSL2X7X_CMD_ALS_INT_CLR)); + if (ret < 0) { + dev_err(&chip->client->dev, + "%s: i2c_write_command failed - err = %d\n", + __func__, ret); + goto out_unlock; /* have no data, so return failure */ + } + + /* extract ALS/lux data */ + ch0 = le16_to_cpup((const __le16 *)&buf[0]); + ch1 = le16_to_cpup((const __le16 *)&buf[2]); + + chip->als_cur_info.als_ch0 = ch0; + chip->als_cur_info.als_ch1 = ch1; + + if ((ch0 >= chip->als_saturation) || (ch1 >= chip->als_saturation)) { + lux = TSL2X7X_LUX_CALC_OVER_FLOW; + goto return_max; + } + + if (ch0 == 0) { + /* have no data, so return LAST VALUE */ + ret = chip->als_cur_info.lux; + goto out_unlock; + } + /* calculate ratio */ + ratio = (ch1 << 15) / ch0; + /* convert to unscaled lux using the pointer to the table */ + p = (struct tsl2x7x_lux *) chip->tsl2x7x_device_lux; + while (p->ratio != 0 && p->ratio < ratio) + p++; + + if (p->ratio == 0) { + lux = 0; + } else { + ch0lux = DIV_ROUND_UP((ch0 * p->ch0), + tsl2X7X_als_gainadj[chip->tsl2x7x_settings.als_gain]); + ch1lux = DIV_ROUND_UP((ch1 * p->ch1), + tsl2X7X_als_gainadj[chip->tsl2x7x_settings.als_gain]); + lux = ch0lux - ch1lux; + } + + /* note: lux is 31 bit max at this point */ + if (ch1lux > ch0lux) { + dev_dbg(&chip->client->dev, "ch1lux > ch0lux-return last value\n"); + ret = chip->als_cur_info.lux; + goto out_unlock; + } + + /* adjust for active time scale */ + if (chip->als_time_scale == 0) + lux = 0; + else + lux = (lux + (chip->als_time_scale >> 1)) / + chip->als_time_scale; + + /* adjust for active gain scale + * The tsl2x7x_device_lux tables have a factor of 256 built-in. + * User-specified gain provides a multiplier. + * Apply user-specified gain before shifting right to retain precision. + * Use 64 bits to avoid overflow on multiplication. + * Then go back to 32 bits before division to avoid using div_u64(). + */ + + lux64 = lux; + lux64 = lux64 * chip->tsl2x7x_settings.als_gain_trim; + lux64 >>= 8; + lux = lux64; + lux = (lux + 500) / 1000; + + if (lux > TSL2X7X_LUX_CALC_OVER_FLOW) /* check for overflow */ + lux = TSL2X7X_LUX_CALC_OVER_FLOW; + + /* Update the structure with the latest lux. */ +return_max: + chip->als_cur_info.lux = lux; + ret = lux; + +out_unlock: + mutex_unlock(&chip->als_mutex); + + return ret; +} + +/** + * tsl2x7x_get_prox() - Reads proximity data registers and updates + * chip->prox_data. + * + * @indio_dev: pointer to IIO device + */ +static int tsl2x7x_get_prox(struct iio_dev *indio_dev) +{ + int i; + int ret; + u8 status; + u8 chdata[2]; + struct tsl2X7X_chip *chip = iio_priv(indio_dev); + + if (mutex_trylock(&chip->prox_mutex) == 0) { + dev_err(&chip->client->dev, + "%s: Can't get prox mutex\n", __func__); + return -EBUSY; + } + + ret = tsl2x7x_i2c_read(chip->client, + (TSL2X7X_CMD_REG | TSL2X7X_STATUS), &status); + if (ret < 0) { + dev_err(&chip->client->dev, + "%s: i2c err=%d\n", __func__, ret); + goto prox_poll_err; + } + + switch (chip->id) { + case tsl2571: + case tsl2671: + case tmd2671: + case tsl2771: + case tmd2771: + if (!(status & TSL2X7X_STA_ADC_VALID)) + goto prox_poll_err; + break; + case tsl2572: + case tsl2672: + case tmd2672: + case tsl2772: + case tmd2772: + if (!(status & TSL2X7X_STA_PRX_VALID)) + goto prox_poll_err; + break; + } + + for (i = 0; i < 2; i++) { + ret = tsl2x7x_i2c_read(chip->client, + (TSL2X7X_CMD_REG | + (TSL2X7X_PRX_LO + i)), &chdata[i]); + if (ret < 0) + goto prox_poll_err; + } + + chip->prox_data = + le16_to_cpup((const __le16 *)&chdata[0]); + +prox_poll_err: + + mutex_unlock(&chip->prox_mutex); + + return chip->prox_data; +} + +/** + * tsl2x7x_defaults() - Populates the device nominal operating parameters + * with those provided by a 'platform' data struct or + * with prefined defaults. + * + * @chip: pointer to device structure. + */ +static void tsl2x7x_defaults(struct tsl2X7X_chip *chip) +{ + /* If Operational settings defined elsewhere.. */ + if (chip->pdata && chip->pdata->platform_default_settings != 0) + memcpy(&(chip->tsl2x7x_settings), + chip->pdata->platform_default_settings, + sizeof(tsl2x7x_default_settings)); + else + memcpy(&(chip->tsl2x7x_settings), + &tsl2x7x_default_settings, + sizeof(tsl2x7x_default_settings)); + + /* Load up the proper lux table. */ + if (chip->pdata && chip->pdata->platform_lux_table[0].ratio != 0) + memcpy(chip->tsl2x7x_device_lux, + chip->pdata->platform_lux_table, + sizeof(chip->pdata->platform_lux_table)); + else + memcpy(chip->tsl2x7x_device_lux, + (struct tsl2x7x_lux *)tsl2x7x_default_lux_table_group[chip->id], + MAX_DEFAULT_TABLE_BYTES); +} + +/** + * tsl2x7x_als_calibrate() - Obtain single reading and calculate + * the als_gain_trim. + * + * @indio_dev: pointer to IIO device + */ +static int tsl2x7x_als_calibrate(struct iio_dev *indio_dev) +{ + struct tsl2X7X_chip *chip = iio_priv(indio_dev); + u8 reg_val; + int gain_trim_val; + int ret; + int lux_val; + + ret = i2c_smbus_write_byte(chip->client, + (TSL2X7X_CMD_REG | TSL2X7X_CNTRL)); + if (ret < 0) { + dev_err(&chip->client->dev, + "%s: failed to write CNTRL register, ret=%d\n", + __func__, ret); + return ret; + } + + reg_val = i2c_smbus_read_byte(chip->client); + if ((reg_val & (TSL2X7X_CNTL_ADC_ENBL | TSL2X7X_CNTL_PWR_ON)) + != (TSL2X7X_CNTL_ADC_ENBL | TSL2X7X_CNTL_PWR_ON)) { + dev_err(&chip->client->dev, + "%s: failed: ADC not enabled\n", __func__); + return -1; + } + + ret = i2c_smbus_write_byte(chip->client, + (TSL2X7X_CMD_REG | TSL2X7X_CNTRL)); + if (ret < 0) { + dev_err(&chip->client->dev, + "%s: failed to write ctrl reg: ret=%d\n", + __func__, ret); + return ret; + } + + reg_val = i2c_smbus_read_byte(chip->client); + if ((reg_val & TSL2X7X_STA_ADC_VALID) != TSL2X7X_STA_ADC_VALID) { + dev_err(&chip->client->dev, + "%s: failed: STATUS - ADC not valid.\n", __func__); + return -ENODATA; + } + + lux_val = tsl2x7x_get_lux(indio_dev); + if (lux_val < 0) { + dev_err(&chip->client->dev, + "%s: failed to get lux\n", __func__); + return lux_val; + } + + gain_trim_val = (((chip->tsl2x7x_settings.als_cal_target) + * chip->tsl2x7x_settings.als_gain_trim) / lux_val); + if ((gain_trim_val < 250) || (gain_trim_val > 4000)) + return -ERANGE; + + chip->tsl2x7x_settings.als_gain_trim = gain_trim_val; + dev_info(&chip->client->dev, + "%s als_calibrate completed\n", chip->client->name); + + return (int) gain_trim_val; +} + +static int tsl2x7x_chip_on(struct iio_dev *indio_dev) +{ + int i; + int ret = 0; + u8 *dev_reg; + u8 utmp; + int als_count; + int als_time; + struct tsl2X7X_chip *chip = iio_priv(indio_dev); + u8 reg_val = 0; + + if (chip->pdata && chip->pdata->power_on) + chip->pdata->power_on(indio_dev); + + /* Non calculated parameters */ + chip->tsl2x7x_config[TSL2X7X_PRX_TIME] = + chip->tsl2x7x_settings.prx_time; + chip->tsl2x7x_config[TSL2X7X_WAIT_TIME] = + chip->tsl2x7x_settings.wait_time; + chip->tsl2x7x_config[TSL2X7X_PRX_CONFIG] = + chip->tsl2x7x_settings.prox_config; + + chip->tsl2x7x_config[TSL2X7X_ALS_MINTHRESHLO] = + (chip->tsl2x7x_settings.als_thresh_low) & 0xFF; + chip->tsl2x7x_config[TSL2X7X_ALS_MINTHRESHHI] = + (chip->tsl2x7x_settings.als_thresh_low >> 8) & 0xFF; + chip->tsl2x7x_config[TSL2X7X_ALS_MAXTHRESHLO] = + (chip->tsl2x7x_settings.als_thresh_high) & 0xFF; + chip->tsl2x7x_config[TSL2X7X_ALS_MAXTHRESHHI] = + (chip->tsl2x7x_settings.als_thresh_high >> 8) & 0xFF; + chip->tsl2x7x_config[TSL2X7X_PERSISTENCE] = + chip->tsl2x7x_settings.persistence; + + chip->tsl2x7x_config[TSL2X7X_PRX_COUNT] = + chip->tsl2x7x_settings.prox_pulse_count; + chip->tsl2x7x_config[TSL2X7X_PRX_MINTHRESHLO] = + chip->tsl2x7x_settings.prox_thres_low; + chip->tsl2x7x_config[TSL2X7X_PRX_MAXTHRESHLO] = + chip->tsl2x7x_settings.prox_thres_high; + + /* and make sure we're not already on */ + if (chip->tsl2x7x_chip_status == TSL2X7X_CHIP_WORKING) { + /* if forcing a register update - turn off, then on */ + dev_info(&chip->client->dev, "device is already enabled\n"); + return -EINVAL; + } + + /* determine als integration regster */ + als_count = (chip->tsl2x7x_settings.als_time * 100 + 135) / 270; + if (als_count == 0) + als_count = 1; /* ensure at least one cycle */ + + /* convert back to time (encompasses overrides) */ + als_time = (als_count * 27 + 5) / 10; + chip->tsl2x7x_config[TSL2X7X_ALS_TIME] = 256 - als_count; + + /* Set the gain based on tsl2x7x_settings struct */ + chip->tsl2x7x_config[TSL2X7X_GAIN] = + (chip->tsl2x7x_settings.als_gain | + (TSL2X7X_mA100 | TSL2X7X_DIODE1) + | ((chip->tsl2x7x_settings.prox_gain) << 2)); + + /* set chip struct re scaling and saturation */ + chip->als_saturation = als_count * 922; /* 90% of full scale */ + chip->als_time_scale = (als_time + 25) / 50; + + /* TSL2X7X Specific power-on / adc enable sequence + * Power on the device 1st. */ + utmp = TSL2X7X_CNTL_PWR_ON; + ret = i2c_smbus_write_byte_data(chip->client, + TSL2X7X_CMD_REG | TSL2X7X_CNTRL, utmp); + if (ret < 0) { + dev_err(&chip->client->dev, + "%s: failed on CNTRL reg.\n", __func__); + return ret; + } + + /* Use the following shadow copy for our delay before enabling ADC. + * Write all the registers. */ + for (i = 0, dev_reg = chip->tsl2x7x_config; + i < TSL2X7X_MAX_CONFIG_REG; i++) { + ret = i2c_smbus_write_byte_data(chip->client, + TSL2X7X_CMD_REG + i, *dev_reg++); + if (ret < 0) { + dev_err(&chip->client->dev, + "%s: failed on write to reg %d.\n", __func__, i); + return ret; + } + } + + mdelay(3); /* Power-on settling time */ + + /* NOW enable the ADC + * initialize the desired mode of operation */ + utmp = TSL2X7X_CNTL_PWR_ON | + TSL2X7X_CNTL_ADC_ENBL | + TSL2X7X_CNTL_PROX_DET_ENBL; + ret = i2c_smbus_write_byte_data(chip->client, + TSL2X7X_CMD_REG | TSL2X7X_CNTRL, utmp); + if (ret < 0) { + dev_err(&chip->client->dev, + "%s: failed on 2nd CTRL reg.\n", __func__); + return ret; + } + + chip->tsl2x7x_chip_status = TSL2X7X_CHIP_WORKING; + + if (chip->tsl2x7x_settings.interrupts_en != 0) { + dev_info(&chip->client->dev, "Setting Up Interrupt(s)\n"); + + reg_val = TSL2X7X_CNTL_PWR_ON | TSL2X7X_CNTL_ADC_ENBL; + if ((chip->tsl2x7x_settings.interrupts_en == 0x20) || + (chip->tsl2x7x_settings.interrupts_en == 0x30)) + reg_val |= TSL2X7X_CNTL_PROX_DET_ENBL; + + reg_val |= chip->tsl2x7x_settings.interrupts_en; + ret = i2c_smbus_write_byte_data(chip->client, + (TSL2X7X_CMD_REG | TSL2X7X_CNTRL), reg_val); + if (ret < 0) + dev_err(&chip->client->dev, + "%s: failed in tsl2x7x_IOCTL_INT_SET.\n", + __func__); + + /* Clear out any initial interrupts */ + ret = i2c_smbus_write_byte(chip->client, + TSL2X7X_CMD_REG | TSL2X7X_CMD_SPL_FN | + TSL2X7X_CMD_PROXALS_INT_CLR); + if (ret < 0) { + dev_err(&chip->client->dev, + "%s: Failed to clear Int status\n", + __func__); + return ret; + } + } + + return ret; +} + +static int tsl2x7x_chip_off(struct iio_dev *indio_dev) +{ + int ret; + struct tsl2X7X_chip *chip = iio_priv(indio_dev); + + /* turn device off */ + chip->tsl2x7x_chip_status = TSL2X7X_CHIP_SUSPENDED; + + ret = i2c_smbus_write_byte_data(chip->client, + TSL2X7X_CMD_REG | TSL2X7X_CNTRL, 0x00); + + if (chip->pdata && chip->pdata->power_off) + chip->pdata->power_off(chip->client); + + return ret; +} + +/** + * tsl2x7x_invoke_change + * @indio_dev: pointer to IIO device + * + * Obtain and lock both ALS and PROX resources, + * determine and save device state (On/Off), + * cycle device to implement updated parameter, + * put device back into proper state, and unlock + * resource. + */ +static +int tsl2x7x_invoke_change(struct iio_dev *indio_dev) +{ + struct tsl2X7X_chip *chip = iio_priv(indio_dev); + int device_status = chip->tsl2x7x_chip_status; + + mutex_lock(&chip->als_mutex); + mutex_lock(&chip->prox_mutex); + + if (device_status == TSL2X7X_CHIP_WORKING) + tsl2x7x_chip_off(indio_dev); + + tsl2x7x_chip_on(indio_dev); + + if (device_status != TSL2X7X_CHIP_WORKING) + tsl2x7x_chip_off(indio_dev); + + mutex_unlock(&chip->prox_mutex); + mutex_unlock(&chip->als_mutex); + + return 0; +} + +static +void tsl2x7x_prox_calculate(int *data, int length, + struct tsl2x7x_prox_stat *statP) +{ + int i; + int sample_sum; + int tmp; + + if (length == 0) + length = 1; + + sample_sum = 0; + statP->min = INT_MAX; + statP->max = INT_MIN; + for (i = 0; i < length; i++) { + sample_sum += data[i]; + statP->min = min(statP->min, data[i]); + statP->max = max(statP->max, data[i]); + } + + statP->mean = sample_sum / length; + sample_sum = 0; + for (i = 0; i < length; i++) { + tmp = data[i] - statP->mean; + sample_sum += tmp * tmp; + } + statP->stddev = int_sqrt((long)sample_sum)/length; +} + +/** + * tsl2x7x_prox_cal() - Calculates std. and sets thresholds. + * @indio_dev: pointer to IIO device + * + * Calculates a standard deviation based on the samples, + * and sets the threshold accordingly. + */ +static void tsl2x7x_prox_cal(struct iio_dev *indio_dev) +{ + int prox_history[MAX_SAMPLES_CAL + 1]; + int i; + struct tsl2x7x_prox_stat prox_stat_data[2]; + struct tsl2x7x_prox_stat *calP; + struct tsl2X7X_chip *chip = iio_priv(indio_dev); + u8 tmp_irq_settings; + u8 current_state = chip->tsl2x7x_chip_status; + + if (chip->tsl2x7x_settings.prox_max_samples_cal > MAX_SAMPLES_CAL) { + dev_err(&chip->client->dev, + "%s: max prox samples cal is too big: %d\n", + __func__, chip->tsl2x7x_settings.prox_max_samples_cal); + chip->tsl2x7x_settings.prox_max_samples_cal = MAX_SAMPLES_CAL; + } + + /* have to stop to change settings */ + tsl2x7x_chip_off(indio_dev); + + /* Enable proximity detection save just in case prox not wanted yet*/ + tmp_irq_settings = chip->tsl2x7x_settings.interrupts_en; + chip->tsl2x7x_settings.interrupts_en |= TSL2X7X_CNTL_PROX_INT_ENBL; + + /*turn on device if not already on*/ + tsl2x7x_chip_on(indio_dev); + + /*gather the samples*/ + for (i = 0; i < chip->tsl2x7x_settings.prox_max_samples_cal; i++) { + mdelay(15); + tsl2x7x_get_prox(indio_dev); + prox_history[i] = chip->prox_data; + dev_info(&chip->client->dev, "2 i=%d prox data= %d\n", + i, chip->prox_data); + } + + tsl2x7x_chip_off(indio_dev); + calP = &prox_stat_data[PROX_STAT_CAL]; + tsl2x7x_prox_calculate(prox_history, + chip->tsl2x7x_settings.prox_max_samples_cal, calP); + chip->tsl2x7x_settings.prox_thres_high = (calP->max << 1) - calP->mean; + + dev_info(&chip->client->dev, " cal min=%d mean=%d max=%d\n", + calP->min, calP->mean, calP->max); + dev_info(&chip->client->dev, + "%s proximity threshold set to %d\n", + chip->client->name, chip->tsl2x7x_settings.prox_thres_high); + + /* back to the way they were */ + chip->tsl2x7x_settings.interrupts_en = tmp_irq_settings; + if (current_state == TSL2X7X_CHIP_WORKING) + tsl2x7x_chip_on(indio_dev); +} + +static ssize_t tsl2x7x_power_state_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct tsl2X7X_chip *chip = iio_priv(dev_get_drvdata(dev)); + + return snprintf(buf, PAGE_SIZE, "%d\n", chip->tsl2x7x_chip_status); +} + +static ssize_t tsl2x7x_power_state_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t len) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + bool value; + + if (strtobool(buf, &value)) + return -EINVAL; + + if (value) + tsl2x7x_chip_on(indio_dev); + else + tsl2x7x_chip_off(indio_dev); + + return len; +} + +static ssize_t tsl2x7x_gain_available_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct tsl2X7X_chip *chip = iio_priv(dev_get_drvdata(dev)); + + switch (chip->id) { + case tsl2571: + case tsl2671: + case tmd2671: + case tsl2771: + case tmd2771: + return snprintf(buf, PAGE_SIZE, "%s\n", "1 8 16 128"); + break; + } + + return snprintf(buf, PAGE_SIZE, "%s\n", "1 8 16 120"); +} + +static ssize_t tsl2x7x_prox_gain_available_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return snprintf(buf, PAGE_SIZE, "%s\n", "1 2 4 8"); +} + +static ssize_t tsl2x7x_als_time_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct tsl2X7X_chip *chip = iio_priv(dev_get_drvdata(dev)); + int y, z; + + y = (TSL2X7X_MAX_TIMER_CNT - (u8)chip->tsl2x7x_settings.als_time) + 1; + z = y * TSL2X7X_MIN_ITIME; + y /= 1000; + z %= 1000; + + return snprintf(buf, PAGE_SIZE, "%d.%03d\n", y, z); +} + +static ssize_t tsl2x7x_als_time_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t len) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct tsl2X7X_chip *chip = iio_priv(dev_get_drvdata(dev)); + struct tsl2x7x_parse_result result; + + result.integer = 0; + result.fract = 0; + + tsl2x7x_parse_buffer(buf, &result); + + result.fract /= 1000; + result.fract /= 3; + chip->tsl2x7x_settings.als_time = + (TSL2X7X_MAX_TIMER_CNT - (u8)result.fract); + + dev_info(&chip->client->dev, "%s: als time = %d", + __func__, chip->tsl2x7x_settings.als_time); + + tsl2x7x_invoke_change(indio_dev); + + return IIO_VAL_INT_PLUS_MICRO; +} + +static IIO_CONST_ATTR(in_illuminance0_integration_time_available, + ".00272 - .696"); + +static ssize_t tsl2x7x_als_cal_target_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct tsl2X7X_chip *chip = iio_priv(dev_get_drvdata(dev)); + + return snprintf(buf, PAGE_SIZE, "%d\n", + chip->tsl2x7x_settings.als_cal_target); +} + +static ssize_t tsl2x7x_als_cal_target_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t len) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct tsl2X7X_chip *chip = iio_priv(dev_get_drvdata(dev)); + unsigned long value; + + if (kstrtoul(buf, 0, &value)) + return -EINVAL; + + if (value) + chip->tsl2x7x_settings.als_cal_target = value; + + tsl2x7x_invoke_change(indio_dev); + + return len; +} + +/* persistence settings */ +static ssize_t tsl2x7x_als_persistence_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct tsl2X7X_chip *chip = iio_priv(dev_get_drvdata(dev)); + int y, z, filter_delay; + + /* Determine integration time */ + y = (TSL2X7X_MAX_TIMER_CNT - (u8)chip->tsl2x7x_settings.als_time) + 1; + z = y * TSL2X7X_MIN_ITIME; + filter_delay = z * (chip->tsl2x7x_settings.persistence & 0x0F); + y = (filter_delay / 1000); + z = (filter_delay % 1000); + + return snprintf(buf, PAGE_SIZE, "%d.%03d\n", y, z); +} + +static ssize_t tsl2x7x_als_persistence_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t len) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct tsl2X7X_chip *chip = iio_priv(dev_get_drvdata(dev)); + struct tsl2x7x_parse_result result; + int y, z, filter_delay; + + result.integer = 0; + result.fract = 0; + tsl2x7x_parse_buffer(buf, &result); + + result.fract /= 1000; + y = (TSL2X7X_MAX_TIMER_CNT - (u8)chip->tsl2x7x_settings.als_time) + 1; + z = y * TSL2X7X_MIN_ITIME; + + filter_delay = + DIV_ROUND_UP(((result.integer * 1000) + result.fract), z); + + chip->tsl2x7x_settings.persistence &= 0xF0; + chip->tsl2x7x_settings.persistence |= (filter_delay & 0x0F); + + dev_info(&chip->client->dev, "%s: als persistence = %d", + __func__, filter_delay); + + tsl2x7x_invoke_change(indio_dev); + + return IIO_VAL_INT_PLUS_MICRO; +} + +static ssize_t tsl2x7x_prox_persistence_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct tsl2X7X_chip *chip = iio_priv(dev_get_drvdata(dev)); + int y, z, filter_delay; + + /* Determine integration time */ + y = (TSL2X7X_MAX_TIMER_CNT - (u8)chip->tsl2x7x_settings.prx_time) + 1; + z = y * TSL2X7X_MIN_ITIME; + filter_delay = z * ((chip->tsl2x7x_settings.persistence & 0xF0) >> 4); + y = (filter_delay / 1000); + z = (filter_delay % 1000); + + return snprintf(buf, PAGE_SIZE, "%d.%03d\n", y, z); +} + +static ssize_t tsl2x7x_prox_persistence_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t len) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct tsl2X7X_chip *chip = iio_priv(dev_get_drvdata(dev)); + struct tsl2x7x_parse_result result; + int y, z, filter_delay; + + result.integer = 0; + result.fract = 0; + tsl2x7x_parse_buffer(buf, &result); + + result.fract /= 1000; + y = (TSL2X7X_MAX_TIMER_CNT - (u8)chip->tsl2x7x_settings.prx_time) + 1; + z = y * TSL2X7X_MIN_ITIME; + + filter_delay = + DIV_ROUND_UP(((result.integer * 1000) + result.fract), z); + + chip->tsl2x7x_settings.persistence &= 0x0F; + chip->tsl2x7x_settings.persistence |= ((filter_delay << 4) & 0xF0); + + dev_info(&chip->client->dev, "%s: prox persistence = %d", + __func__, filter_delay); + + tsl2x7x_invoke_change(indio_dev); + + return IIO_VAL_INT_PLUS_MICRO; +} + +static ssize_t tsl2x7x_do_calibrate(struct device *dev, + struct device_attribute *attr, const char *buf, size_t len) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + bool value; + + if (strtobool(buf, &value)) + return -EINVAL; + + if (value) + tsl2x7x_als_calibrate(indio_dev); + + tsl2x7x_invoke_change(indio_dev); + + return len; +} + +static ssize_t tsl2x7x_luxtable_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct tsl2X7X_chip *chip = iio_priv(dev_get_drvdata(dev)); + int i = 0; + int offset = 0; + + while (i < (TSL2X7X_MAX_LUX_TABLE_SIZE * 3)) { + offset += snprintf(buf + offset, PAGE_SIZE, "%d,%d,%d,", + chip->tsl2x7x_device_lux[i].ratio, + chip->tsl2x7x_device_lux[i].ch0, + chip->tsl2x7x_device_lux[i].ch1); + if (chip->tsl2x7x_device_lux[i].ratio == 0) { + /* We just printed the first "0" entry. + * Now get rid of the extra "," and break. */ + offset--; + break; + } + i++; + } + + offset += snprintf(buf + offset, PAGE_SIZE, "\n"); + return offset; +} + +static ssize_t tsl2x7x_luxtable_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t len) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct tsl2X7X_chip *chip = iio_priv(dev_get_drvdata(dev)); + int value[ARRAY_SIZE(chip->tsl2x7x_device_lux)*3 + 1]; + int n; + + get_options(buf, ARRAY_SIZE(value), value); + + /* We now have an array of ints starting at value[1], and + * enumerated by value[0]. + * We expect each group of three ints is one table entry, + * and the last table entry is all 0. + */ + n = value[0]; + if ((n % 3) || n < 6 || + n > ((ARRAY_SIZE(chip->tsl2x7x_device_lux) - 1) * 3)) { + dev_info(dev, "LUX TABLE INPUT ERROR 1 Value[0]=%d\n", n); + return -EINVAL; + } + + if ((value[(n - 2)] | value[(n - 1)] | value[n]) != 0) { + dev_info(dev, "LUX TABLE INPUT ERROR 2 Value[0]=%d\n", n); + return -EINVAL; + } + + if (chip->tsl2x7x_chip_status == TSL2X7X_CHIP_WORKING) + tsl2x7x_chip_off(indio_dev); + + /* Zero out the table */ + memset(chip->tsl2x7x_device_lux, 0, sizeof(chip->tsl2x7x_device_lux)); + memcpy(chip->tsl2x7x_device_lux, &value[1], (value[0] * 4)); + + tsl2x7x_invoke_change(indio_dev); + + return len; +} + +static ssize_t tsl2x7x_do_prox_calibrate(struct device *dev, + struct device_attribute *attr, const char *buf, size_t len) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + bool value; + + if (strtobool(buf, &value)) + return -EINVAL; + + if (value) + tsl2x7x_prox_cal(indio_dev); + + tsl2x7x_invoke_change(indio_dev); + + return len; +} + +static int tsl2x7x_read_interrupt_config(struct iio_dev *indio_dev, + u64 event_code) +{ + struct tsl2X7X_chip *chip = iio_priv(indio_dev); + int ret; + + if (IIO_EVENT_CODE_EXTRACT_CHAN_TYPE(event_code) == IIO_INTENSITY) + ret = !!(chip->tsl2x7x_settings.interrupts_en & 0x10); + else + ret = !!(chip->tsl2x7x_settings.interrupts_en & 0x20); + + return ret; +} + +static int tsl2x7x_write_interrupt_config(struct iio_dev *indio_dev, + u64 event_code, + int val) +{ + struct tsl2X7X_chip *chip = iio_priv(indio_dev); + + if (IIO_EVENT_CODE_EXTRACT_CHAN_TYPE(event_code) == IIO_INTENSITY) { + if (val) + chip->tsl2x7x_settings.interrupts_en |= 0x10; + else + chip->tsl2x7x_settings.interrupts_en &= 0x20; + } else { + if (val) + chip->tsl2x7x_settings.interrupts_en |= 0x20; + else + chip->tsl2x7x_settings.interrupts_en &= 0x10; + } + + tsl2x7x_invoke_change(indio_dev); + + return 0; +} + +static int tsl2x7x_write_thresh(struct iio_dev *indio_dev, + u64 event_code, + int val) +{ + struct tsl2X7X_chip *chip = iio_priv(indio_dev); + + if (IIO_EVENT_CODE_EXTRACT_CHAN_TYPE(event_code) == IIO_INTENSITY) { + switch (IIO_EVENT_CODE_EXTRACT_DIR(event_code)) { + case IIO_EV_DIR_RISING: + chip->tsl2x7x_settings.als_thresh_high = val; + break; + case IIO_EV_DIR_FALLING: + chip->tsl2x7x_settings.als_thresh_low = val; + break; + default: + return -EINVAL; + } + } else { + switch (IIO_EVENT_CODE_EXTRACT_DIR(event_code)) { + case IIO_EV_DIR_RISING: + chip->tsl2x7x_settings.prox_thres_high = val; + break; + case IIO_EV_DIR_FALLING: + chip->tsl2x7x_settings.prox_thres_low = val; + break; + default: + return -EINVAL; + } + } + + tsl2x7x_invoke_change(indio_dev); + + return 0; +} + +static int tsl2x7x_read_thresh(struct iio_dev *indio_dev, + u64 event_code, + int *val) +{ + struct tsl2X7X_chip *chip = iio_priv(indio_dev); + + if (IIO_EVENT_CODE_EXTRACT_CHAN_TYPE(event_code) == IIO_INTENSITY) { + switch (IIO_EVENT_CODE_EXTRACT_DIR(event_code)) { + case IIO_EV_DIR_RISING: + *val = chip->tsl2x7x_settings.als_thresh_high; + break; + case IIO_EV_DIR_FALLING: + *val = chip->tsl2x7x_settings.als_thresh_low; + break; + default: + return -EINVAL; + } + } else { + switch (IIO_EVENT_CODE_EXTRACT_DIR(event_code)) { + case IIO_EV_DIR_RISING: + *val = chip->tsl2x7x_settings.prox_thres_high; + break; + case IIO_EV_DIR_FALLING: + *val = chip->tsl2x7x_settings.prox_thres_low; + break; + default: + return -EINVAL; + } + } + + return 0; +} + +static int tsl2x7x_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, + int *val2, + long mask) +{ + int ret = -EINVAL; + struct tsl2X7X_chip *chip = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_PROCESSED: + switch (chan->type) { + case IIO_LIGHT: + tsl2x7x_get_lux(indio_dev); + *val = chip->als_cur_info.lux; + ret = IIO_VAL_INT; + break; + default: + return -EINVAL; + break; + } + break; + case IIO_CHAN_INFO_RAW: + switch (chan->type) { + case IIO_INTENSITY: + tsl2x7x_get_lux(indio_dev); + if (chan->channel == 0) + *val = chip->als_cur_info.als_ch0; + else + *val = chip->als_cur_info.als_ch1; + ret = IIO_VAL_INT; + break; + case IIO_PROXIMITY: + tsl2x7x_get_prox(indio_dev); + *val = chip->prox_data; + ret = IIO_VAL_INT; + break; + default: + return -EINVAL; + break; + } + break; + case IIO_CHAN_INFO_CALIBSCALE: + if (chan->type == IIO_LIGHT) + *val = + tsl2X7X_als_gainadj[chip->tsl2x7x_settings.als_gain]; + else + *val = + tsl2X7X_prx_gainadj[chip->tsl2x7x_settings.prox_gain]; + ret = IIO_VAL_INT; + break; + case IIO_CHAN_INFO_CALIBBIAS: + *val = chip->tsl2x7x_settings.als_gain_trim; + ret = IIO_VAL_INT; + break; + + default: + ret = -EINVAL; + } + + return ret; +} + +static int tsl2x7x_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, + int val2, + long mask) +{ + struct tsl2X7X_chip *chip = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_CALIBSCALE: + if (chan->type == IIO_INTENSITY) { + switch (val) { + case 1: + chip->tsl2x7x_settings.als_gain = 0; + break; + case 8: + chip->tsl2x7x_settings.als_gain = 1; + break; + case 16: + chip->tsl2x7x_settings.als_gain = 2; + break; + case 120: + switch (chip->id) { + case tsl2572: + case tsl2672: + case tmd2672: + case tsl2772: + case tmd2772: + return -EINVAL; + break; + } + chip->tsl2x7x_settings.als_gain = 3; + break; + case 128: + switch (chip->id) { + case tsl2571: + case tsl2671: + case tmd2671: + case tsl2771: + case tmd2771: + return -EINVAL; + break; + } + chip->tsl2x7x_settings.als_gain = 3; + break; + default: + return -EINVAL; + } + } else { + switch (val) { + case 1: + chip->tsl2x7x_settings.prox_gain = 0; + break; + case 2: + chip->tsl2x7x_settings.prox_gain = 1; + break; + case 4: + chip->tsl2x7x_settings.prox_gain = 2; + break; + case 8: + chip->tsl2x7x_settings.prox_gain = 3; + break; + default: + return -EINVAL; + } + } + break; + case IIO_CHAN_INFO_CALIBBIAS: + chip->tsl2x7x_settings.als_gain_trim = val; + break; + + default: + return -EINVAL; + } + + tsl2x7x_invoke_change(indio_dev); + + return 0; +} + +static DEVICE_ATTR(power_state, S_IRUGO | S_IWUSR, + tsl2x7x_power_state_show, tsl2x7x_power_state_store); + +static DEVICE_ATTR(in_proximity0_calibscale_available, S_IRUGO, + tsl2x7x_prox_gain_available_show, NULL); + +static DEVICE_ATTR(in_illuminance0_calibscale_available, S_IRUGO, + tsl2x7x_gain_available_show, NULL); + +static DEVICE_ATTR(in_illuminance0_integration_time, S_IRUGO | S_IWUSR, + tsl2x7x_als_time_show, tsl2x7x_als_time_store); + +static DEVICE_ATTR(in_illuminance0_target_input, S_IRUGO | S_IWUSR, + tsl2x7x_als_cal_target_show, tsl2x7x_als_cal_target_store); + +static DEVICE_ATTR(in_illuminance0_calibrate, S_IWUSR, NULL, + tsl2x7x_do_calibrate); + +static DEVICE_ATTR(in_proximity0_calibrate, S_IWUSR, NULL, + tsl2x7x_do_prox_calibrate); + +static DEVICE_ATTR(in_illuminance0_lux_table, S_IRUGO | S_IWUSR, + tsl2x7x_luxtable_show, tsl2x7x_luxtable_store); + +static DEVICE_ATTR(in_intensity0_thresh_period, S_IRUGO | S_IWUSR, + tsl2x7x_als_persistence_show, tsl2x7x_als_persistence_store); + +static DEVICE_ATTR(in_proximity0_thresh_period, S_IRUGO | S_IWUSR, + tsl2x7x_prox_persistence_show, tsl2x7x_prox_persistence_store); + +/* Use the default register values to identify the Taos device */ +static int tsl2x7x_device_id(unsigned char *id, int target) +{ + switch (target) { + case tsl2571: + case tsl2671: + case tsl2771: + return ((*id & 0xf0) == TRITON_ID); + break; + case tmd2671: + case tmd2771: + return ((*id & 0xf0) == HALIBUT_ID); + break; + case tsl2572: + case tsl2672: + case tmd2672: + case tsl2772: + case tmd2772: + return ((*id & 0xf0) == SWORDFISH_ID); + break; + } + + return -EINVAL; +} + +static irqreturn_t tsl2x7x_event_handler(int irq, void *private) +{ + struct iio_dev *indio_dev = private; + struct tsl2X7X_chip *chip = iio_priv(indio_dev); + s64 timestamp = iio_get_time_ns(); + int ret; + u8 value; + + value = i2c_smbus_read_byte_data(chip->client, + TSL2X7X_CMD_REG | TSL2X7X_STATUS); + + /* What type of interrupt do we need to process */ + if (value & TSL2X7X_STA_PRX_INTR) { + tsl2x7x_get_prox(indio_dev); /* freshen data for ABI */ + iio_push_event(indio_dev, + IIO_UNMOD_EVENT_CODE(IIO_PROXIMITY, + 0, + IIO_EV_TYPE_THRESH, + IIO_EV_DIR_EITHER), + timestamp); + } + + if (value & TSL2X7X_STA_ALS_INTR) { + tsl2x7x_get_lux(indio_dev); /* freshen data for ABI */ + iio_push_event(indio_dev, + IIO_UNMOD_EVENT_CODE(IIO_LIGHT, + 0, + IIO_EV_TYPE_THRESH, + IIO_EV_DIR_EITHER), + timestamp); + } + /* Clear interrupt now that we have handled it. */ + ret = i2c_smbus_write_byte(chip->client, + TSL2X7X_CMD_REG | TSL2X7X_CMD_SPL_FN | + TSL2X7X_CMD_PROXALS_INT_CLR); + if (ret < 0) + dev_err(&chip->client->dev, + "%s: Failed to clear irq from event handler. err = %d\n", + __func__, ret); + + return IRQ_HANDLED; +} + +static struct attribute *tsl2x7x_ALS_device_attrs[] = { + &dev_attr_power_state.attr, + &dev_attr_in_illuminance0_calibscale_available.attr, + &dev_attr_in_illuminance0_integration_time.attr, + &iio_const_attr_in_illuminance0_integration_time_available\ + .dev_attr.attr, + &dev_attr_in_illuminance0_target_input.attr, + &dev_attr_in_illuminance0_calibrate.attr, + &dev_attr_in_illuminance0_lux_table.attr, + NULL +}; + +static struct attribute *tsl2x7x_PRX_device_attrs[] = { + &dev_attr_power_state.attr, + &dev_attr_in_proximity0_calibrate.attr, + NULL +}; + +static struct attribute *tsl2x7x_ALSPRX_device_attrs[] = { + &dev_attr_power_state.attr, + &dev_attr_in_illuminance0_calibscale_available.attr, + &dev_attr_in_illuminance0_integration_time.attr, + &iio_const_attr_in_illuminance0_integration_time_available\ + .dev_attr.attr, + &dev_attr_in_illuminance0_target_input.attr, + &dev_attr_in_illuminance0_calibrate.attr, + &dev_attr_in_illuminance0_lux_table.attr, + &dev_attr_in_proximity0_calibrate.attr, + NULL +}; + +static struct attribute *tsl2x7x_PRX2_device_attrs[] = { + &dev_attr_power_state.attr, + &dev_attr_in_proximity0_calibrate.attr, + &dev_attr_in_proximity0_calibscale_available.attr, + NULL +}; + +static struct attribute *tsl2x7x_ALSPRX2_device_attrs[] = { + &dev_attr_power_state.attr, + &dev_attr_in_illuminance0_calibscale_available.attr, + &dev_attr_in_illuminance0_integration_time.attr, + &iio_const_attr_in_illuminance0_integration_time_available\ + .dev_attr.attr, + &dev_attr_in_illuminance0_target_input.attr, + &dev_attr_in_illuminance0_calibrate.attr, + &dev_attr_in_illuminance0_lux_table.attr, + &dev_attr_in_proximity0_calibrate.attr, + &dev_attr_in_proximity0_calibscale_available.attr, + NULL +}; + +static struct attribute *tsl2X7X_ALS_event_attrs[] = { + &dev_attr_in_intensity0_thresh_period.attr, + NULL, +}; +static struct attribute *tsl2X7X_PRX_event_attrs[] = { + &dev_attr_in_proximity0_thresh_period.attr, + NULL, +}; + +static struct attribute *tsl2X7X_ALSPRX_event_attrs[] = { + &dev_attr_in_intensity0_thresh_period.attr, + &dev_attr_in_proximity0_thresh_period.attr, + NULL, +}; + +static const struct attribute_group tsl2X7X_device_attr_group_tbl[] = { + [ALS] = { + .attrs = tsl2x7x_ALS_device_attrs, + }, + [PRX] = { + .attrs = tsl2x7x_PRX_device_attrs, + }, + [ALSPRX] = { + .attrs = tsl2x7x_ALSPRX_device_attrs, + }, + [PRX2] = { + .attrs = tsl2x7x_PRX2_device_attrs, + }, + [ALSPRX2] = { + .attrs = tsl2x7x_ALSPRX2_device_attrs, + }, +}; + +static struct attribute_group tsl2X7X_event_attr_group_tbl[] = { + [ALS] = { + .attrs = tsl2X7X_ALS_event_attrs, + .name = "events", + }, + [PRX] = { + .attrs = tsl2X7X_PRX_event_attrs, + .name = "events", + }, + [ALSPRX] = { + .attrs = tsl2X7X_ALSPRX_event_attrs, + .name = "events", + }, +}; + +static const struct iio_info tsl2X7X_device_info[] = { + [ALS] = { + .attrs = &tsl2X7X_device_attr_group_tbl[ALS], + .event_attrs = &tsl2X7X_event_attr_group_tbl[ALS], + .driver_module = THIS_MODULE, + .read_raw = &tsl2x7x_read_raw, + .write_raw = &tsl2x7x_write_raw, + .read_event_value = &tsl2x7x_read_thresh, + .write_event_value = &tsl2x7x_write_thresh, + .read_event_config = &tsl2x7x_read_interrupt_config, + .write_event_config = &tsl2x7x_write_interrupt_config, + }, + [PRX] = { + .attrs = &tsl2X7X_device_attr_group_tbl[PRX], + .event_attrs = &tsl2X7X_event_attr_group_tbl[PRX], + .driver_module = THIS_MODULE, + .read_raw = &tsl2x7x_read_raw, + .write_raw = &tsl2x7x_write_raw, + .read_event_value = &tsl2x7x_read_thresh, + .write_event_value = &tsl2x7x_write_thresh, + .read_event_config = &tsl2x7x_read_interrupt_config, + .write_event_config = &tsl2x7x_write_interrupt_config, + }, + [ALSPRX] = { + .attrs = &tsl2X7X_device_attr_group_tbl[ALSPRX], + .event_attrs = &tsl2X7X_event_attr_group_tbl[ALSPRX], + .driver_module = THIS_MODULE, + .read_raw = &tsl2x7x_read_raw, + .write_raw = &tsl2x7x_write_raw, + .read_event_value = &tsl2x7x_read_thresh, + .write_event_value = &tsl2x7x_write_thresh, + .read_event_config = &tsl2x7x_read_interrupt_config, + .write_event_config = &tsl2x7x_write_interrupt_config, + }, + [PRX2] = { + .attrs = &tsl2X7X_device_attr_group_tbl[PRX2], + .event_attrs = &tsl2X7X_event_attr_group_tbl[PRX], + .driver_module = THIS_MODULE, + .read_raw = &tsl2x7x_read_raw, + .write_raw = &tsl2x7x_write_raw, + .read_event_value = &tsl2x7x_read_thresh, + .write_event_value = &tsl2x7x_write_thresh, + .read_event_config = &tsl2x7x_read_interrupt_config, + .write_event_config = &tsl2x7x_write_interrupt_config, + }, + [ALSPRX2] = { + .attrs = &tsl2X7X_device_attr_group_tbl[ALSPRX2], + .event_attrs = &tsl2X7X_event_attr_group_tbl[ALSPRX], + .driver_module = THIS_MODULE, + .read_raw = &tsl2x7x_read_raw, + .write_raw = &tsl2x7x_write_raw, + .read_event_value = &tsl2x7x_read_thresh, + .write_event_value = &tsl2x7x_write_thresh, + .read_event_config = &tsl2x7x_read_interrupt_config, + .write_event_config = &tsl2x7x_write_interrupt_config, + }, +}; + +static const struct tsl2x7x_chip_info tsl2x7x_chip_info_tbl[] = { + [ALS] = { + .channel = { + { + .type = IIO_LIGHT, + .indexed = 1, + .channel = 0, + .info_mask = IIO_CHAN_INFO_PROCESSED_SEPARATE_BIT, + }, { + .type = IIO_INTENSITY, + .indexed = 1, + .channel = 0, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT | + IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT, + .event_mask = TSL2X7X_EVENT_MASK + }, { + .type = IIO_INTENSITY, + .indexed = 1, + .channel = 1, + }, + }, + .chan_table_elements = 3, + .info = &tsl2X7X_device_info[ALS], + }, + [PRX] = { + .channel = { + { + .type = IIO_PROXIMITY, + .indexed = 1, + .channel = 0, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, + .event_mask = TSL2X7X_EVENT_MASK + }, + }, + .chan_table_elements = 1, + .info = &tsl2X7X_device_info[PRX], + }, + [ALSPRX] = { + .channel = { + { + .type = IIO_LIGHT, + .indexed = 1, + .channel = 0, + .info_mask = IIO_CHAN_INFO_PROCESSED_SEPARATE_BIT + }, { + .type = IIO_INTENSITY, + .indexed = 1, + .channel = 0, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT | + IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT, + .event_mask = TSL2X7X_EVENT_MASK + }, { + .type = IIO_INTENSITY, + .indexed = 1, + .channel = 1, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, + }, { + .type = IIO_PROXIMITY, + .indexed = 1, + .channel = 0, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, + .event_mask = TSL2X7X_EVENT_MASK + }, + }, + .chan_table_elements = 4, + .info = &tsl2X7X_device_info[ALSPRX], + }, + [PRX2] = { + .channel = { + { + .type = IIO_PROXIMITY, + .indexed = 1, + .channel = 0, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT, + .event_mask = TSL2X7X_EVENT_MASK + }, + }, + .chan_table_elements = 1, + .info = &tsl2X7X_device_info[PRX2], + }, + [ALSPRX2] = { + .channel = { + { + .type = IIO_LIGHT, + .indexed = 1, + .channel = 0, + .info_mask = IIO_CHAN_INFO_PROCESSED_SEPARATE_BIT, + }, { + .type = IIO_INTENSITY, + .indexed = 1, + .channel = 0, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT | + IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT, + .event_mask = TSL2X7X_EVENT_MASK + }, { + .type = IIO_INTENSITY, + .indexed = 1, + .channel = 1, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, + }, { + .type = IIO_PROXIMITY, + .indexed = 1, + .channel = 0, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT, + .event_mask = TSL2X7X_EVENT_MASK + }, + }, + .chan_table_elements = 4, + .info = &tsl2X7X_device_info[ALSPRX2], + }, +}; + +static int __devinit tsl2x7x_probe(struct i2c_client *clientp, + const struct i2c_device_id *id) +{ + int ret; + unsigned char device_id; + struct iio_dev *indio_dev; + struct tsl2X7X_chip *chip; + + indio_dev = iio_device_alloc(sizeof(*chip)); + if (!indio_dev) + return -ENOMEM; + + chip = iio_priv(indio_dev); + chip->client = clientp; + i2c_set_clientdata(clientp, indio_dev); + + ret = tsl2x7x_i2c_read(chip->client, + TSL2X7X_CHIPID, &device_id); + if (ret < 0) + goto fail1; + + if ((!tsl2x7x_device_id(&device_id, id->driver_data)) || + (tsl2x7x_device_id(&device_id, id->driver_data) == -EINVAL)) { + dev_info(&chip->client->dev, + "%s: i2c device found does not match expected id\n", + __func__); + goto fail1; + } + + ret = i2c_smbus_write_byte(clientp, (TSL2X7X_CMD_REG | TSL2X7X_CNTRL)); + if (ret < 0) { + dev_err(&clientp->dev, "%s: write to cmd reg failed. err = %d\n", + __func__, ret); + goto fail1; + } + + /* ALS and PROX functions can be invoked via user space poll + * or H/W interrupt. If busy return last sample. */ + mutex_init(&chip->als_mutex); + mutex_init(&chip->prox_mutex); + + chip->tsl2x7x_chip_status = TSL2X7X_CHIP_UNKNOWN; + chip->pdata = clientp->dev.platform_data; + chip->id = id->driver_data; + chip->chip_info = + &tsl2x7x_chip_info_tbl[device_channel_config[id->driver_data]]; + + indio_dev->info = chip->chip_info->info; + indio_dev->dev.parent = &clientp->dev; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->name = chip->client->name; + indio_dev->channels = chip->chip_info->channel; + indio_dev->num_channels = chip->chip_info->chan_table_elements; + + if (clientp->irq) { + ret = request_threaded_irq(clientp->irq, + NULL, + &tsl2x7x_event_handler, + IRQF_TRIGGER_RISING | IRQF_ONESHOT, + "TSL2X7X_event", + indio_dev); + if (ret) { + dev_err(&clientp->dev, + "%s: irq request failed", __func__); + goto fail2; + } + } + + /* Load up the defaults */ + tsl2x7x_defaults(chip); + /* Make sure the chip is on */ + tsl2x7x_chip_on(indio_dev); + + ret = iio_device_register(indio_dev); + if (ret) { + dev_err(&clientp->dev, + "%s: iio registration failed\n", __func__); + goto fail1; + } + + dev_info(&clientp->dev, "%s Light sensor found.\n", id->name); + + return 0; + +fail1: + if (clientp->irq) + free_irq(clientp->irq, indio_dev); +fail2: + iio_device_free(indio_dev); + + return ret; +} + +static int tsl2x7x_suspend(struct device *dev) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct tsl2X7X_chip *chip = iio_priv(indio_dev); + int ret = 0; + + if (chip->tsl2x7x_chip_status == TSL2X7X_CHIP_WORKING) { + ret = tsl2x7x_chip_off(indio_dev); + chip->tsl2x7x_chip_status = TSL2X7X_CHIP_SUSPENDED; + } + + if (chip->pdata && chip->pdata->platform_power) { + pm_message_t pmm = {PM_EVENT_SUSPEND}; + chip->pdata->platform_power(dev, pmm); + } + + return ret; +} + +static int tsl2x7x_resume(struct device *dev) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct tsl2X7X_chip *chip = iio_priv(indio_dev); + int ret = 0; + + if (chip->pdata && chip->pdata->platform_power) { + pm_message_t pmm = {PM_EVENT_RESUME}; + chip->pdata->platform_power(dev, pmm); + } + + if (chip->tsl2x7x_chip_status == TSL2X7X_CHIP_SUSPENDED) + ret = tsl2x7x_chip_on(indio_dev); + + return ret; +} + +static int __devexit tsl2x7x_remove(struct i2c_client *client) +{ + struct tsl2X7X_chip *chip = i2c_get_clientdata(client); + struct iio_dev *indio_dev = iio_priv_to_dev(chip); + + tsl2x7x_chip_off(indio_dev); + + iio_device_unregister(indio_dev); + if (client->irq) + free_irq(client->irq, chip->client->name); + + iio_device_free(indio_dev); + + return 0; +} + +static struct i2c_device_id tsl2x7x_idtable[] = { + { "tsl2571", tsl2571 }, + { "tsl2671", tsl2671 }, + { "tmd2671", tmd2671 }, + { "tsl2771", tsl2771 }, + { "tmd2771", tmd2771 }, + { "tsl2572", tsl2572 }, + { "tsl2672", tsl2672 }, + { "tmd2672", tmd2672 }, + { "tsl2772", tsl2772 }, + { "tmd2772", tmd2772 }, + {} +}; + +MODULE_DEVICE_TABLE(i2c, tsl2x7x_idtable); + +static const struct dev_pm_ops tsl2x7x_pm_ops = { + .suspend = tsl2x7x_suspend, + .resume = tsl2x7x_resume, +}; + +/* Driver definition */ +static struct i2c_driver tsl2x7x_driver = { + .driver = { + .name = "tsl2x7x", + .pm = &tsl2x7x_pm_ops, + }, + .id_table = tsl2x7x_idtable, + .probe = tsl2x7x_probe, + .remove = __devexit_p(tsl2x7x_remove), +}; + +module_i2c_driver(tsl2x7x_driver); + +MODULE_AUTHOR("J. August Brenner<jbrenner@taosinc.com>"); +MODULE_DESCRIPTION("TAOS tsl2x7x ambient and proximity light sensor driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/staging/iio/machine.h b/drivers/staging/iio/machine.h deleted file mode 100644 index 0b1f19bfdc4..00000000000 --- a/drivers/staging/iio/machine.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * Industrial I/O in kernel access map definitions for board files. - * - * Copyright (c) 2011 Jonathan Cameron - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ - -/** - * struct iio_map - description of link between consumer and device channels - * @adc_channel_label: Label used to identify the channel on the provider. - * This is matched against the datasheet_name element - * of struct iio_chan_spec. - * @consumer_dev_name: Name to uniquely identify the consumer device. - * @consumer_channel: Unique name used to idenitify the channel on the - * consumer side. - */ -struct iio_map { - const char *adc_channel_label; - const char *consumer_dev_name; - const char *consumer_channel; -}; diff --git a/drivers/staging/iio/magnetometer/ak8975.c b/drivers/staging/iio/magnetometer/ak8975.c index ebc2d0840ca..93026c54446 100644 --- a/drivers/staging/iio/magnetometer/ak8975.c +++ b/drivers/staging/iio/magnetometer/ak8975.c @@ -30,8 +30,8 @@ #include <linux/gpio.h> -#include "../iio.h" -#include "../sysfs.h" +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> /* * Register definitions, as well as various shifts and masks to get at the * individual fields of the registers. @@ -431,7 +431,7 @@ static int ak8975_read_raw(struct iio_dev *indio_dev, struct ak8975_data *data = iio_priv(indio_dev); switch (mask) { - case 0: + case IIO_CHAN_INFO_RAW: return ak8975_read_axis(indio_dev, chan->address, val); case IIO_CHAN_INFO_SCALE: *val = data->raw_to_gauss[chan->address]; @@ -445,7 +445,8 @@ static int ak8975_read_raw(struct iio_dev *indio_dev, .type = IIO_MAGN, \ .modified = 1, \ .channel2 = IIO_MOD_##axis, \ - .info_mask = IIO_CHAN_INFO_SCALE_SEPARATE_BIT, \ + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \ + IIO_CHAN_INFO_SCALE_SEPARATE_BIT, \ .address = index, \ } @@ -505,7 +506,7 @@ static int ak8975_probe(struct i2c_client *client, } /* Register with IIO */ - indio_dev = iio_allocate_device(sizeof(*data)); + indio_dev = iio_device_alloc(sizeof(*data)); if (indio_dev == NULL) { err = -ENOMEM; goto exit_gpio; @@ -536,7 +537,7 @@ static int ak8975_probe(struct i2c_client *client, return 0; exit_free_iio: - iio_free_device(indio_dev); + iio_device_free(indio_dev); exit_gpio: if (gpio_is_valid(eoc_gpio)) gpio_free(eoc_gpio); @@ -554,7 +555,7 @@ static int ak8975_remove(struct i2c_client *client) if (gpio_is_valid(data->eoc_gpio)) gpio_free(data->eoc_gpio); - iio_free_device(indio_dev); + iio_device_free(indio_dev); return 0; } diff --git a/drivers/staging/iio/magnetometer/hmc5843.c b/drivers/staging/iio/magnetometer/hmc5843.c index e00b416c4d3..3ec65180b81 100644 --- a/drivers/staging/iio/magnetometer/hmc5843.c +++ b/drivers/staging/iio/magnetometer/hmc5843.c @@ -22,8 +22,8 @@ #include <linux/i2c.h> #include <linux/slab.h> #include <linux/types.h> -#include "../iio.h" -#include "../sysfs.h" +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> #define HMC5843_I2C_ADDRESS 0x1E @@ -459,7 +459,7 @@ static int hmc5843_read_raw(struct iio_dev *indio_dev, struct hmc5843_data *data = iio_priv(indio_dev); switch (mask) { - case 0: + case IIO_CHAN_INFO_RAW: return hmc5843_read_measurement(indio_dev, chan->address, val); @@ -476,7 +476,8 @@ static int hmc5843_read_raw(struct iio_dev *indio_dev, .type = IIO_MAGN, \ .modified = 1, \ .channel2 = IIO_MOD_##axis, \ - .info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT, \ + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \ + IIO_CHAN_INFO_SCALE_SHARED_BIT, \ .address = add \ } @@ -545,7 +546,7 @@ static int hmc5843_probe(struct i2c_client *client, struct iio_dev *indio_dev; int err = 0; - indio_dev = iio_allocate_device(sizeof(*data)); + indio_dev = iio_device_alloc(sizeof(*data)); if (indio_dev == NULL) { err = -ENOMEM; goto exit; @@ -573,7 +574,7 @@ static int hmc5843_probe(struct i2c_client *client, goto exit_free2; return 0; exit_free2: - iio_free_device(indio_dev); + iio_device_free(indio_dev); exit: return err; } @@ -585,7 +586,7 @@ static int hmc5843_remove(struct i2c_client *client) iio_device_unregister(indio_dev); /* sleep mode to save power */ hmc5843_configure(client, MODE_SLEEP); - iio_free_device(indio_dev); + iio_device_free(indio_dev); return 0; } diff --git a/drivers/staging/iio/meter/ade7753.c b/drivers/staging/iio/meter/ade7753.c index 57baac6c0d4..280331b664f 100644 --- a/drivers/staging/iio/meter/ade7753.c +++ b/drivers/staging/iio/meter/ade7753.c @@ -18,8 +18,8 @@ #include <linux/list.h> #include <linux/module.h> -#include "../iio.h" -#include "../sysfs.h" +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> #include "meter.h" #include "ade7753.h" @@ -517,7 +517,7 @@ static int __devinit ade7753_probe(struct spi_device *spi) struct iio_dev *indio_dev; /* setup the industrialio driver allocated elements */ - indio_dev = iio_allocate_device(sizeof(*st)); + indio_dev = iio_device_alloc(sizeof(*st)); if (indio_dev == NULL) { ret = -ENOMEM; goto error_ret; @@ -546,7 +546,7 @@ static int __devinit ade7753_probe(struct spi_device *spi) return 0; error_free_dev: - iio_free_device(indio_dev); + iio_device_free(indio_dev); error_ret: return ret; @@ -564,7 +564,7 @@ static int ade7753_remove(struct spi_device *spi) if (ret) goto err_ret; - iio_free_device(indio_dev); + iio_device_free(indio_dev); err_ret: return ret; } diff --git a/drivers/staging/iio/meter/ade7754.c b/drivers/staging/iio/meter/ade7754.c index 8d81c92007e..59a2e3ef72b 100644 --- a/drivers/staging/iio/meter/ade7754.c +++ b/drivers/staging/iio/meter/ade7754.c @@ -18,8 +18,8 @@ #include <linux/list.h> #include <linux/module.h> -#include "../iio.h" -#include "../sysfs.h" +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> #include "meter.h" #include "ade7754.h" @@ -540,7 +540,7 @@ static int __devinit ade7754_probe(struct spi_device *spi) struct iio_dev *indio_dev; /* setup the industrialio driver allocated elements */ - indio_dev = iio_allocate_device(sizeof(*st)); + indio_dev = iio_device_alloc(sizeof(*st)); if (indio_dev == NULL) { ret = -ENOMEM; goto error_ret; @@ -568,7 +568,7 @@ static int __devinit ade7754_probe(struct spi_device *spi) return 0; error_free_dev: - iio_free_device(indio_dev); + iio_device_free(indio_dev); error_ret: return ret; @@ -585,7 +585,7 @@ static int ade7754_remove(struct spi_device *spi) if (ret) goto err_ret; - iio_free_device(indio_dev); + iio_device_free(indio_dev); err_ret: return ret; diff --git a/drivers/staging/iio/meter/ade7758_core.c b/drivers/staging/iio/meter/ade7758_core.c index dcb20294dfe..1a5c9c40814 100644 --- a/drivers/staging/iio/meter/ade7758_core.c +++ b/drivers/staging/iio/meter/ade7758_core.c @@ -18,9 +18,9 @@ #include <linux/list.h> #include <linux/module.h> -#include "../iio.h" -#include "../sysfs.h" -#include "../buffer.h" +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/buffer.h> #include "meter.h" #include "ade7758.h" @@ -662,66 +662,217 @@ static const struct attribute_group ade7758_attribute_group = { }; static struct iio_chan_spec ade7758_channels[] = { - IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, "raw", 0, 0, - IIO_CHAN_INFO_SCALE_SHARED_BIT, - AD7758_WT(AD7758_PHASE_A, AD7758_VOLTAGE), - 0, IIO_ST('s', 24, 32, 0), 0), - IIO_CHAN(IIO_CURRENT, 0, 1, 0, "raw", 0, 0, - IIO_CHAN_INFO_SCALE_SHARED_BIT, - AD7758_WT(AD7758_PHASE_A, AD7758_CURRENT), - 1, IIO_ST('s', 24, 32, 0), 0), - IIO_CHAN(IIO_POWER, 0, 1, 0, "apparent_raw", 0, 0, - IIO_CHAN_INFO_SCALE_SHARED_BIT, - AD7758_WT(AD7758_PHASE_A, AD7758_APP_PWR), - 2, IIO_ST('s', 24, 32, 0), 0), - IIO_CHAN(IIO_POWER, 0, 1, 0, "active_raw", 0, 0, - IIO_CHAN_INFO_SCALE_SHARED_BIT, - AD7758_WT(AD7758_PHASE_A, AD7758_ACT_PWR), - 3, IIO_ST('s', 24, 32, 0), 0), - IIO_CHAN(IIO_POWER, 0, 1, 0, "reactive_raw", 0, 0, - IIO_CHAN_INFO_SCALE_SHARED_BIT, - AD7758_WT(AD7758_PHASE_A, AD7758_REACT_PWR), - 4, IIO_ST('s', 24, 32, 0), 0), - IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, "raw", 1, 0, - IIO_CHAN_INFO_SCALE_SHARED_BIT, - AD7758_WT(AD7758_PHASE_B, AD7758_VOLTAGE), - 5, IIO_ST('s', 24, 32, 0), 0), - IIO_CHAN(IIO_CURRENT, 0, 1, 0, "raw", 1, 0, - IIO_CHAN_INFO_SCALE_SHARED_BIT, - AD7758_WT(AD7758_PHASE_B, AD7758_CURRENT), - 6, IIO_ST('s', 24, 32, 0), 0), - IIO_CHAN(IIO_POWER, 0, 1, 0, "apparent_raw", 1, 0, - IIO_CHAN_INFO_SCALE_SHARED_BIT, - AD7758_WT(AD7758_PHASE_B, AD7758_APP_PWR), - 7, IIO_ST('s', 24, 32, 0), 0), - IIO_CHAN(IIO_POWER, 0, 1, 0, "active_raw", 1, 0, - IIO_CHAN_INFO_SCALE_SHARED_BIT, - AD7758_WT(AD7758_PHASE_B, AD7758_ACT_PWR), - 8, IIO_ST('s', 24, 32, 0), 0), - IIO_CHAN(IIO_POWER, 0, 1, 0, "reactive_raw", 1, 0, - IIO_CHAN_INFO_SCALE_SHARED_BIT, - AD7758_WT(AD7758_PHASE_B, AD7758_REACT_PWR), - 9, IIO_ST('s', 24, 32, 0), 0), - IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, "raw", 2, 0, - IIO_CHAN_INFO_SCALE_SHARED_BIT, - AD7758_WT(AD7758_PHASE_C, AD7758_VOLTAGE), - 10, IIO_ST('s', 24, 32, 0), 0), - IIO_CHAN(IIO_CURRENT, 0, 1, 0, "raw", 2, 0, - IIO_CHAN_INFO_SCALE_SHARED_BIT, - AD7758_WT(AD7758_PHASE_C, AD7758_CURRENT), - 11, IIO_ST('s', 24, 32, 0), 0), - IIO_CHAN(IIO_POWER, 0, 1, 0, "apparent_raw", 2, 0, - IIO_CHAN_INFO_SCALE_SHARED_BIT, - AD7758_WT(AD7758_PHASE_C, AD7758_APP_PWR), - 12, IIO_ST('s', 24, 32, 0), 0), - IIO_CHAN(IIO_POWER, 0, 1, 0, "active_raw", 2, 0, - IIO_CHAN_INFO_SCALE_SHARED_BIT, - AD7758_WT(AD7758_PHASE_C, AD7758_ACT_PWR), - 13, IIO_ST('s', 24, 32, 0), 0), - IIO_CHAN(IIO_POWER, 0, 1, 0, "reactive_raw", 2, 0, - IIO_CHAN_INFO_SCALE_SHARED_BIT, - AD7758_WT(AD7758_PHASE_C, AD7758_REACT_PWR), - 14, IIO_ST('s', 24, 32, 0), 0), + { + .type = IIO_VOLTAGE, + .indexed = 1, + .channel = 0, + .extend_name = "raw", + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_SCALE_SHARED_BIT, + .address = AD7758_WT(AD7758_PHASE_A, AD7758_VOLTAGE), + .scan_index = 0, + .scan_type = { + .sign = 's', + .realbits = 24, + .storagebits = 32, + }, + }, { + .type = IIO_CURRENT, + .indexed = 1, + .channel = 0, + .extend_name = "raw", + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_SCALE_SHARED_BIT, + .address = AD7758_WT(AD7758_PHASE_A, AD7758_CURRENT), + .scan_index = 1, + .scan_type = { + .sign = 's', + .realbits = 24, + .storagebits = 32, + }, + }, { + .type = IIO_POWER, + .indexed = 1, + .channel = 0, + .extend_name = "apparent_raw", + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_SCALE_SHARED_BIT, + .address = AD7758_WT(AD7758_PHASE_A, AD7758_APP_PWR), + .scan_index = 2, + .scan_type = { + .sign = 's', + .realbits = 24, + .storagebits = 32, + }, + }, { + .type = IIO_POWER, + .indexed = 1, + .channel = 0, + .extend_name = "active_raw", + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_SCALE_SHARED_BIT, + .address = AD7758_WT(AD7758_PHASE_A, AD7758_ACT_PWR), + .scan_index = 3, + .scan_type = { + .sign = 's', + .realbits = 24, + .storagebits = 32, + }, + }, { + .type = IIO_POWER, + .indexed = 1, + .channel = 0, + .extend_name = "reactive_raw", + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_SCALE_SHARED_BIT, + .address = AD7758_WT(AD7758_PHASE_A, AD7758_REACT_PWR), + .scan_index = 4, + .scan_type = { + .sign = 's', + .realbits = 24, + .storagebits = 32, + }, + }, { + .type = IIO_VOLTAGE, + .indexed = 1, + .channel = 1, + .extend_name = "raw", + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_SCALE_SHARED_BIT, + .address = AD7758_WT(AD7758_PHASE_B, AD7758_VOLTAGE), + .scan_index = 5, + .scan_type = { + .sign = 's', + .realbits = 24, + .storagebits = 32, + }, + }, { + .type = IIO_CURRENT, + .indexed = 1, + .channel = 1, + .extend_name = "raw", + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_SCALE_SHARED_BIT, + .address = AD7758_WT(AD7758_PHASE_B, AD7758_CURRENT), + .scan_index = 6, + .scan_type = { + .sign = 's', + .realbits = 24, + .storagebits = 32, + }, + }, { + .type = IIO_POWER, + .indexed = 1, + .channel = 1, + .extend_name = "apparent_raw", + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_SCALE_SHARED_BIT, + .address = AD7758_WT(AD7758_PHASE_B, AD7758_APP_PWR), + .scan_index = 7, + .scan_type = { + .sign = 's', + .realbits = 24, + .storagebits = 32, + }, + }, { + .type = IIO_POWER, + .indexed = 1, + .channel = 1, + .extend_name = "active_raw", + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_SCALE_SHARED_BIT, + .address = AD7758_WT(AD7758_PHASE_B, AD7758_ACT_PWR), + .scan_index = 8, + .scan_type = { + .sign = 's', + .realbits = 24, + .storagebits = 32, + }, + }, { + .type = IIO_POWER, + .indexed = 1, + .channel = 1, + .extend_name = "reactive_raw", + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_SCALE_SHARED_BIT, + .address = AD7758_WT(AD7758_PHASE_B, AD7758_REACT_PWR), + .scan_index = 9, + .scan_type = { + .sign = 's', + .realbits = 24, + .storagebits = 32, + }, + }, { + .type = IIO_VOLTAGE, + .indexed = 1, + .channel = 2, + .extend_name = "raw", + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_SCALE_SHARED_BIT, + .address = AD7758_WT(AD7758_PHASE_C, AD7758_VOLTAGE), + .scan_index = 10, + .scan_type = { + .sign = 's', + .realbits = 24, + .storagebits = 32, + }, + }, { + .type = IIO_CURRENT, + .indexed = 1, + .channel = 2, + .extend_name = "raw", + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_SCALE_SHARED_BIT, + .address = AD7758_WT(AD7758_PHASE_C, AD7758_CURRENT), + .scan_index = 11, + .scan_type = { + .sign = 's', + .realbits = 24, + .storagebits = 32, + }, + }, { + .type = IIO_POWER, + .indexed = 1, + .channel = 2, + .extend_name = "apparent_raw", + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_SCALE_SHARED_BIT, + .address = AD7758_WT(AD7758_PHASE_C, AD7758_APP_PWR), + .scan_index = 12, + .scan_type = { + .sign = 's', + .realbits = 24, + .storagebits = 32, + }, + }, { + .type = IIO_POWER, + .indexed = 1, + .channel = 2, + .extend_name = "active_raw", + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_SCALE_SHARED_BIT, + .address = AD7758_WT(AD7758_PHASE_C, AD7758_ACT_PWR), + .scan_index = 13, + .scan_type = { + .sign = 's', + .realbits = 24, + .storagebits = 32, + }, + }, { + .type = IIO_POWER, + .indexed = 1, + .channel = 2, + .extend_name = "reactive_raw", + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_SCALE_SHARED_BIT, + .address = AD7758_WT(AD7758_PHASE_C, AD7758_REACT_PWR), + .scan_index = 14, + .scan_type = { + .sign = 's', + .realbits = 24, + .storagebits = 32, + }, + }, IIO_CHAN_SOFT_TIMESTAMP(15), }; @@ -734,7 +885,7 @@ static int __devinit ade7758_probe(struct spi_device *spi) { int i, ret; struct ade7758_state *st; - struct iio_dev *indio_dev = iio_allocate_device(sizeof(*st)); + struct iio_dev *indio_dev = iio_device_alloc(sizeof(*st)); if (indio_dev == NULL) { ret = -ENOMEM; @@ -800,7 +951,7 @@ static int __devinit ade7758_probe(struct spi_device *spi) return 0; error_remove_trigger: - if (indio_dev->modes & INDIO_BUFFER_TRIGGERED) + if (spi->irq) ade7758_remove_trigger(indio_dev); error_uninitialize_ring: ade7758_uninitialize_ring(indio_dev); @@ -811,7 +962,7 @@ error_free_tx: error_free_rx: kfree(st->rx); error_free_dev: - iio_free_device(indio_dev); + iio_device_free(indio_dev); error_ret: return ret; } @@ -833,7 +984,7 @@ static int ade7758_remove(struct spi_device *spi) kfree(st->tx); kfree(st->rx); - iio_free_device(indio_dev); + iio_device_free(indio_dev); err_ret: return ret; diff --git a/drivers/staging/iio/meter/ade7758_ring.c b/drivers/staging/iio/meter/ade7758_ring.c index c45b23bb122..7b9be8a2cc5 100644 --- a/drivers/staging/iio/meter/ade7758_ring.c +++ b/drivers/staging/iio/meter/ade7758_ring.c @@ -12,9 +12,9 @@ #include <linux/slab.h> #include <asm/unaligned.h> -#include "../iio.h" +#include <linux/iio/iio.h> #include "../ring_sw.h" -#include "../trigger_consumer.h" +#include <linux/iio/trigger_consumer.h> #include "ade7758.h" /** @@ -72,7 +72,7 @@ static irqreturn_t ade7758_trigger_handler(int irq, void *p) *dat32 = get_unaligned_be32(&st->rx_buf[5]) & 0xFFFFFF; /* Guaranteed to be aligned with 8 byte boundary */ - if (ring->scan_timestamp) + if (indio_dev->scan_timestamp) dat64[1] = pf->timestamp; ring->access->store_to(ring, (u8 *)dat64, pf->timestamp); @@ -92,29 +92,19 @@ static irqreturn_t ade7758_trigger_handler(int irq, void *p) static int ade7758_ring_preenable(struct iio_dev *indio_dev) { struct ade7758_state *st = iio_priv(indio_dev); - struct iio_buffer *ring = indio_dev->buffer; - size_t d_size; unsigned channel; + int ret; if (!bitmap_empty(indio_dev->active_scan_mask, indio_dev->masklength)) return -EINVAL; + ret = iio_sw_buffer_preenable(indio_dev); + if (ret < 0) + return ret; + channel = find_first_bit(indio_dev->active_scan_mask, indio_dev->masklength); - d_size = st->ade7758_ring_channels[channel].scan_type.storagebits / 8; - - if (ring->scan_timestamp) { - d_size += sizeof(s64); - - if (d_size % sizeof(s64)) - d_size += sizeof(s64) - (d_size % sizeof(s64)); - } - - if (indio_dev->buffer->access->set_bytes_per_datum) - indio_dev->buffer->access-> - set_bytes_per_datum(indio_dev->buffer, d_size); - ade7758_write_waveform_type(&indio_dev->dev, st->ade7758_ring_channels[channel].address); diff --git a/drivers/staging/iio/meter/ade7758_trigger.c b/drivers/staging/iio/meter/ade7758_trigger.c index b6569c70665..f9c6a340092 100644 --- a/drivers/staging/iio/meter/ade7758_trigger.c +++ b/drivers/staging/iio/meter/ade7758_trigger.c @@ -11,8 +11,8 @@ #include <linux/spi/spi.h> #include <linux/export.h> -#include "../iio.h" -#include "../trigger.h" +#include <linux/iio/iio.h> +#include <linux/iio/trigger.h> #include "ade7758.h" /** @@ -63,7 +63,7 @@ int ade7758_probe_trigger(struct iio_dev *indio_dev) struct ade7758_state *st = iio_priv(indio_dev); int ret; - st->trig = iio_allocate_trigger("%s-dev%d", + st->trig = iio_trigger_alloc("%s-dev%d", spi_get_device_id(st->us)->name, indio_dev->id); if (st->trig == NULL) { @@ -94,7 +94,7 @@ int ade7758_probe_trigger(struct iio_dev *indio_dev) error_free_irq: free_irq(st->us->irq, st->trig); error_free_trig: - iio_free_trigger(st->trig); + iio_trigger_free(st->trig); error_ret: return ret; } @@ -105,5 +105,5 @@ void ade7758_remove_trigger(struct iio_dev *indio_dev) iio_trigger_unregister(st->trig); free_irq(st->us->irq, st->trig); - iio_free_trigger(st->trig); + iio_trigger_free(st->trig); } diff --git a/drivers/staging/iio/meter/ade7759.c b/drivers/staging/iio/meter/ade7759.c index 0beab478dcd..91add54af11 100644 --- a/drivers/staging/iio/meter/ade7759.c +++ b/drivers/staging/iio/meter/ade7759.c @@ -18,8 +18,8 @@ #include <linux/list.h> #include <linux/module.h> -#include "../iio.h" -#include "../sysfs.h" +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> #include "meter.h" #include "ade7759.h" @@ -463,7 +463,7 @@ static int __devinit ade7759_probe(struct spi_device *spi) struct iio_dev *indio_dev; /* setup the industrialio driver allocated elements */ - indio_dev = iio_allocate_device(sizeof(*st)); + indio_dev = iio_device_alloc(sizeof(*st)); if (indio_dev == NULL) { ret = -ENOMEM; goto error_ret; @@ -491,7 +491,7 @@ static int __devinit ade7759_probe(struct spi_device *spi) return 0; error_free_dev: - iio_free_device(indio_dev); + iio_device_free(indio_dev); error_ret: return ret; } @@ -507,7 +507,7 @@ static int ade7759_remove(struct spi_device *spi) if (ret) goto err_ret; - iio_free_device(indio_dev); + iio_device_free(indio_dev); err_ret: return ret; diff --git a/drivers/staging/iio/meter/ade7854-i2c.c b/drivers/staging/iio/meter/ade7854-i2c.c index 1e1faa0479d..527aa97c74a 100644 --- a/drivers/staging/iio/meter/ade7854-i2c.c +++ b/drivers/staging/iio/meter/ade7854-i2c.c @@ -12,7 +12,7 @@ #include <linux/slab.h> #include <linux/module.h> -#include "../iio.h" +#include <linux/iio/iio.h> #include "ade7854.h" static int ade7854_i2c_write_reg_8(struct device *dev, @@ -208,7 +208,7 @@ static int __devinit ade7854_i2c_probe(struct i2c_client *client, struct ade7854_state *st; struct iio_dev *indio_dev; - indio_dev = iio_allocate_device(sizeof(*st)); + indio_dev = iio_device_alloc(sizeof(*st)); if (indio_dev == NULL) return -ENOMEM; st = iio_priv(indio_dev); @@ -226,7 +226,7 @@ static int __devinit ade7854_i2c_probe(struct i2c_client *client, ret = ade7854_probe(indio_dev, &client->dev); if (ret) - iio_free_device(indio_dev); + iio_device_free(indio_dev); return ret; } diff --git a/drivers/staging/iio/meter/ade7854-spi.c b/drivers/staging/iio/meter/ade7854-spi.c index 81121862c1b..eaafaef9cae 100644 --- a/drivers/staging/iio/meter/ade7854-spi.c +++ b/drivers/staging/iio/meter/ade7854-spi.c @@ -12,7 +12,7 @@ #include <linux/slab.h> #include <linux/module.h> -#include "../iio.h" +#include <linux/iio/iio.h> #include "ade7854.h" static int ade7854_spi_write_reg_8(struct device *dev, @@ -306,7 +306,7 @@ static int __devinit ade7854_spi_probe(struct spi_device *spi) struct ade7854_state *st; struct iio_dev *indio_dev; - indio_dev = iio_allocate_device(sizeof(*st)); + indio_dev = iio_device_alloc(sizeof(*st)); if (indio_dev == NULL) return -ENOMEM; st = iio_priv(indio_dev); @@ -325,7 +325,7 @@ static int __devinit ade7854_spi_probe(struct spi_device *spi) ret = ade7854_probe(indio_dev, &spi->dev); if (ret) - iio_free_device(indio_dev); + iio_device_free(indio_dev); return 0; } diff --git a/drivers/staging/iio/meter/ade7854.c b/drivers/staging/iio/meter/ade7854.c index 49c01c5c1b5..fa3ba01af41 100644 --- a/drivers/staging/iio/meter/ade7854.c +++ b/drivers/staging/iio/meter/ade7854.c @@ -17,8 +17,8 @@ #include <linux/list.h> #include <linux/module.h> -#include "../iio.h" -#include "../sysfs.h" +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> #include "meter.h" #include "ade7854.h" @@ -581,7 +581,7 @@ int ade7854_probe(struct iio_dev *indio_dev, struct device *dev) error_unreg_dev: iio_device_unregister(indio_dev); error_free_dev: - iio_free_device(indio_dev); + iio_device_free(indio_dev); return ret; } @@ -590,7 +590,7 @@ EXPORT_SYMBOL(ade7854_probe); int ade7854_remove(struct iio_dev *indio_dev) { iio_device_unregister(indio_dev); - iio_free_device(indio_dev); + iio_device_free(indio_dev); return 0; } diff --git a/drivers/staging/iio/meter/meter.h b/drivers/staging/iio/meter/meter.h index 6a3db142363..23e1b5f480a 100644 --- a/drivers/staging/iio/meter/meter.h +++ b/drivers/staging/iio/meter/meter.h @@ -1,4 +1,4 @@ -#include "../sysfs.h" +#include <linux/iio/sysfs.h> /* metering ic types of attribute */ diff --git a/drivers/staging/iio/resolver/ad2s1200.c b/drivers/staging/iio/resolver/ad2s1200.c index d8ce854c189..8b71eb0e16f 100644 --- a/drivers/staging/iio/resolver/ad2s1200.c +++ b/drivers/staging/iio/resolver/ad2s1200.c @@ -19,8 +19,8 @@ #include <linux/gpio.h> #include <linux/module.h> -#include "../iio.h" -#include "../sysfs.h" +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> #define DRV_NAME "ad2s1200" @@ -85,10 +85,12 @@ static const struct iio_chan_spec ad2s1200_channels[] = { .type = IIO_ANGL, .indexed = 1, .channel = 0, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, }, { .type = IIO_ANGL_VEL, .indexed = 1, .channel = 0, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, } }; @@ -110,7 +112,7 @@ static int __devinit ad2s1200_probe(struct spi_device *spi) DRV_NAME, pins[pn]); goto error_ret; } - indio_dev = iio_allocate_device(sizeof(*st)); + indio_dev = iio_device_alloc(sizeof(*st)); if (indio_dev == NULL) { ret = -ENOMEM; goto error_ret; @@ -140,7 +142,7 @@ static int __devinit ad2s1200_probe(struct spi_device *spi) return 0; error_free_dev: - iio_free_device(indio_dev); + iio_device_free(indio_dev); error_ret: for (--pn; pn >= 0; pn--) gpio_free(pins[pn]); @@ -150,7 +152,7 @@ error_ret: static int __devexit ad2s1200_remove(struct spi_device *spi) { iio_device_unregister(spi_get_drvdata(spi)); - iio_free_device(spi_get_drvdata(spi)); + iio_device_free(spi_get_drvdata(spi)); return 0; } diff --git a/drivers/staging/iio/resolver/ad2s1210.c b/drivers/staging/iio/resolver/ad2s1210.c index c439fcf72be..a236ddbee37 100644 --- a/drivers/staging/iio/resolver/ad2s1210.c +++ b/drivers/staging/iio/resolver/ad2s1210.c @@ -18,8 +18,8 @@ #include <linux/gpio.h> #include <linux/module.h> -#include "../iio.h" -#include "../sysfs.h" +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> #include "ad2s1210.h" #define DRV_NAME "ad2s1210" @@ -580,10 +580,12 @@ static struct iio_chan_spec ad2s1210_channels[] = { .type = IIO_ANGL, .indexed = 1, .channel = 0, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, }, { .type = IIO_ANGL_VEL, .indexed = 1, .channel = 0, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, } }; @@ -688,7 +690,7 @@ static int __devinit ad2s1210_probe(struct spi_device *spi) if (spi->dev.platform_data == NULL) return -EINVAL; - indio_dev = iio_allocate_device(sizeof(*st)); + indio_dev = iio_device_alloc(sizeof(*st)); if (indio_dev == NULL) { ret = -ENOMEM; goto error_ret; @@ -729,7 +731,7 @@ static int __devinit ad2s1210_probe(struct spi_device *spi) error_free_gpios: ad2s1210_free_gpios(st); error_free_dev: - iio_free_device(indio_dev); + iio_device_free(indio_dev); error_ret: return ret; } @@ -740,7 +742,7 @@ static int __devexit ad2s1210_remove(struct spi_device *spi) iio_device_unregister(indio_dev); ad2s1210_free_gpios(iio_priv(indio_dev)); - iio_free_device(indio_dev); + iio_device_free(indio_dev); return 0; } diff --git a/drivers/staging/iio/resolver/ad2s90.c b/drivers/staging/iio/resolver/ad2s90.c index 2a86f582ddf..a8057228dca 100644 --- a/drivers/staging/iio/resolver/ad2s90.c +++ b/drivers/staging/iio/resolver/ad2s90.c @@ -16,8 +16,8 @@ #include <linux/sysfs.h> #include <linux/module.h> -#include "../iio.h" -#include "../sysfs.h" +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> struct ad2s90_state { struct mutex lock; @@ -55,6 +55,7 @@ static const struct iio_chan_spec ad2s90_chan = { .type = IIO_ANGL, .indexed = 1, .channel = 0, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, }; static int __devinit ad2s90_probe(struct spi_device *spi) @@ -63,7 +64,7 @@ static int __devinit ad2s90_probe(struct spi_device *spi) struct ad2s90_state *st; int ret = 0; - indio_dev = iio_allocate_device(sizeof(*st)); + indio_dev = iio_device_alloc(sizeof(*st)); if (indio_dev == NULL) { ret = -ENOMEM; goto error_ret; @@ -92,7 +93,7 @@ static int __devinit ad2s90_probe(struct spi_device *spi) return 0; error_free_dev: - iio_free_device(indio_dev); + iio_device_free(indio_dev); error_ret: return ret; } @@ -100,7 +101,7 @@ error_ret: static int __devexit ad2s90_remove(struct spi_device *spi) { iio_device_unregister(spi_get_drvdata(spi)); - iio_free_device(spi_get_drvdata(spi)); + iio_device_free(spi_get_drvdata(spi)); return 0; } diff --git a/drivers/staging/iio/ring_sw.c b/drivers/staging/iio/ring_sw.c index b9945ec44fa..9358c6cb1c7 100644 --- a/drivers/staging/iio/ring_sw.c +++ b/drivers/staging/iio/ring_sw.c @@ -15,7 +15,7 @@ #include <linux/sched.h> #include <linux/poll.h> #include "ring_sw.h" -#include "trigger.h" +#include <linux/iio/trigger.h> /** * struct iio_sw_ring_buffer - software ring buffer diff --git a/drivers/staging/iio/ring_sw.h b/drivers/staging/iio/ring_sw.h index 7556e212236..a5857aa7aef 100644 --- a/drivers/staging/iio/ring_sw.h +++ b/drivers/staging/iio/ring_sw.h @@ -23,7 +23,7 @@ #ifndef _IIO_RING_SW_H_ #define _IIO_RING_SW_H_ -#include "buffer.h" +#include <linux/iio/buffer.h> struct iio_buffer *iio_sw_rb_allocate(struct iio_dev *indio_dev); void iio_sw_rb_free(struct iio_buffer *ring); diff --git a/drivers/staging/iio/sysfs.h b/drivers/staging/iio/sysfs.h deleted file mode 100644 index bfedb73b850..00000000000 --- a/drivers/staging/iio/sysfs.h +++ /dev/null @@ -1,117 +0,0 @@ -/* The industrial I/O core - * - *Copyright (c) 2008 Jonathan Cameron - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - * - * General attributes - */ - -#ifndef _INDUSTRIAL_IO_SYSFS_H_ -#define _INDUSTRIAL_IO_SYSFS_H_ - -struct iio_chan_spec; - -/** - * struct iio_dev_attr - iio specific device attribute - * @dev_attr: underlying device attribute - * @address: associated register address - * @l: list head for maintaining list of dynamically created attrs. - */ -struct iio_dev_attr { - struct device_attribute dev_attr; - u64 address; - struct list_head l; - struct iio_chan_spec const *c; -}; - -#define to_iio_dev_attr(_dev_attr) \ - container_of(_dev_attr, struct iio_dev_attr, dev_attr) - -ssize_t iio_read_const_attr(struct device *dev, - struct device_attribute *attr, - char *len); - -/** - * struct iio_const_attr - constant device specific attribute - * often used for things like available modes - * @string: attribute string - * @dev_attr: underlying device attribute - */ -struct iio_const_attr { - const char *string; - struct device_attribute dev_attr; -}; - -#define to_iio_const_attr(_dev_attr) \ - container_of(_dev_attr, struct iio_const_attr, dev_attr) - -/* Some attributes will be hard coded (device dependent) and not require an - address, in these cases pass a negative */ -#define IIO_ATTR(_name, _mode, _show, _store, _addr) \ - { .dev_attr = __ATTR(_name, _mode, _show, _store), \ - .address = _addr } - -#define IIO_DEVICE_ATTR(_name, _mode, _show, _store, _addr) \ - struct iio_dev_attr iio_dev_attr_##_name \ - = IIO_ATTR(_name, _mode, _show, _store, _addr) - -#define IIO_DEVICE_ATTR_NAMED(_vname, _name, _mode, _show, _store, _addr) \ - struct iio_dev_attr iio_dev_attr_##_vname \ - = IIO_ATTR(_name, _mode, _show, _store, _addr) - -#define IIO_CONST_ATTR(_name, _string) \ - struct iio_const_attr iio_const_attr_##_name \ - = { .string = _string, \ - .dev_attr = __ATTR(_name, S_IRUGO, iio_read_const_attr, NULL)} - -#define IIO_CONST_ATTR_NAMED(_vname, _name, _string) \ - struct iio_const_attr iio_const_attr_##_vname \ - = { .string = _string, \ - .dev_attr = __ATTR(_name, S_IRUGO, iio_read_const_attr, NULL)} - -/* Generic attributes of onetype or another */ -/** - * IIO_DEV_ATTR_RESET: resets the device - **/ -#define IIO_DEV_ATTR_RESET(_store) \ - IIO_DEVICE_ATTR(reset, S_IWUSR, NULL, _store, 0) - -/** - * IIO_DEV_ATTR_SAMP_FREQ - sets any internal clock frequency - * @_mode: sysfs file mode/permissions - * @_show: output method for the attribute - * @_store: input method for the attribute - **/ -#define IIO_DEV_ATTR_SAMP_FREQ(_mode, _show, _store) \ - IIO_DEVICE_ATTR(sampling_frequency, _mode, _show, _store, 0) - -/** - * IIO_DEV_ATTR_SAMP_FREQ_AVAIL - list available sampling frequencies - * @_show: output method for the attribute - * - * May be mode dependent on some devices - **/ -#define IIO_DEV_ATTR_SAMP_FREQ_AVAIL(_show) \ - IIO_DEVICE_ATTR(sampling_frequency_available, S_IRUGO, _show, NULL, 0) -/** - * IIO_CONST_ATTR_AVAIL_SAMP_FREQ - list available sampling frequencies - * @_string: frequency string for the attribute - * - * Constant version - **/ -#define IIO_CONST_ATTR_SAMP_FREQ_AVAIL(_string) \ - IIO_CONST_ATTR(sampling_frequency_available, _string) - -#define IIO_DEV_ATTR_TEMP_RAW(_show) \ - IIO_DEVICE_ATTR(in_temp_raw, S_IRUGO, _show, NULL, 0) - -#define IIO_CONST_ATTR_TEMP_OFFSET(_string) \ - IIO_CONST_ATTR(in_temp_offset, _string) - -#define IIO_CONST_ATTR_TEMP_SCALE(_string) \ - IIO_CONST_ATTR(in_temp_scale, _string) - -#endif /* _INDUSTRIAL_IO_SYSFS_H_ */ diff --git a/drivers/staging/iio/trigger.h b/drivers/staging/iio/trigger.h deleted file mode 100644 index 1cfca231db8..00000000000 --- a/drivers/staging/iio/trigger.h +++ /dev/null @@ -1,119 +0,0 @@ -/* The industrial I/O core, trigger handling functions - * - * Copyright (c) 2008 Jonathan Cameron - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ -#include <linux/irq.h> -#include <linux/module.h> - -#ifndef _IIO_TRIGGER_H_ -#define _IIO_TRIGGER_H_ - -struct iio_subirq { - bool enabled; -}; - -/** - * struct iio_trigger_ops - operations structure for an iio_trigger. - * @owner: used to monitor usage count of the trigger. - * @set_trigger_state: switch on/off the trigger on demand - * @try_reenable: function to reenable the trigger when the - * use count is zero (may be NULL) - * @validate_device: function to validate the device when the - * current trigger gets changed. - * - * This is typically static const within a driver and shared by - * instances of a given device. - **/ -struct iio_trigger_ops { - struct module *owner; - int (*set_trigger_state)(struct iio_trigger *trig, bool state); - int (*try_reenable)(struct iio_trigger *trig); - int (*validate_device)(struct iio_trigger *trig, - struct iio_dev *indio_dev); -}; - - -/** - * struct iio_trigger - industrial I/O trigger device - * - * @id: [INTERN] unique id number - * @name: [DRIVER] unique name - * @dev: [DRIVER] associated device (if relevant) - * @private_data: [DRIVER] device specific data - * @list: [INTERN] used in maintenance of global trigger list - * @alloc_list: [DRIVER] used for driver specific trigger list - * @use_count: use count for the trigger - * @subirq_chip: [INTERN] associate 'virtual' irq chip. - * @subirq_base: [INTERN] base number for irqs provided by trigger. - * @subirqs: [INTERN] information about the 'child' irqs. - * @pool: [INTERN] bitmap of irqs currently in use. - * @pool_lock: [INTERN] protection of the irq pool. - **/ -struct iio_trigger { - const struct iio_trigger_ops *ops; - int id; - const char *name; - struct device dev; - - void *private_data; - struct list_head list; - struct list_head alloc_list; - int use_count; - - struct irq_chip subirq_chip; - int subirq_base; - - struct iio_subirq subirqs[CONFIG_IIO_CONSUMERS_PER_TRIGGER]; - unsigned long pool[BITS_TO_LONGS(CONFIG_IIO_CONSUMERS_PER_TRIGGER)]; - struct mutex pool_lock; -}; - - -static inline struct iio_trigger *to_iio_trigger(struct device *d) -{ - return container_of(d, struct iio_trigger, dev); -}; - -static inline void iio_put_trigger(struct iio_trigger *trig) -{ - module_put(trig->ops->owner); - put_device(&trig->dev); -}; - -static inline void iio_get_trigger(struct iio_trigger *trig) -{ - get_device(&trig->dev); - __module_get(trig->ops->owner); -}; - -/** - * iio_trigger_register() - register a trigger with the IIO core - * @trig_info: trigger to be registered - **/ -int iio_trigger_register(struct iio_trigger *trig_info); - -/** - * iio_trigger_unregister() - unregister a trigger from the core - * @trig_info: trigger to be unregistered - **/ -void iio_trigger_unregister(struct iio_trigger *trig_info); - -/** - * iio_trigger_poll() - called on a trigger occurring - * @trig: trigger which occurred - * - * Typically called in relevant hardware interrupt handler. - **/ -void iio_trigger_poll(struct iio_trigger *trig, s64 time); -void iio_trigger_poll_chained(struct iio_trigger *trig, s64 time); - -irqreturn_t iio_trigger_generic_data_rdy_poll(int irq, void *private); - -__printf(1, 2) struct iio_trigger *iio_allocate_trigger(const char *fmt, ...); -void iio_free_trigger(struct iio_trigger *trig); - -#endif /* _IIO_TRIGGER_H_ */ diff --git a/drivers/staging/iio/trigger/iio-trig-bfin-timer.c b/drivers/staging/iio/trigger/iio-trig-bfin-timer.c index 665653d79f0..f85734d212b 100644 --- a/drivers/staging/iio/trigger/iio-trig-bfin-timer.c +++ b/drivers/staging/iio/trigger/iio-trig-bfin-timer.c @@ -15,8 +15,8 @@ #include <asm/gptimers.h> -#include "../iio.h" -#include "../trigger.h" +#include <linux/iio/iio.h> +#include <linux/iio/trigger.h> struct bfin_timer { unsigned short id, bit; @@ -172,7 +172,7 @@ static int __devinit iio_bfin_tmr_trigger_probe(struct platform_device *pdev) st->timer_num = ret; st->t = &iio_bfin_timer_code[st->timer_num]; - st->trig = iio_allocate_trigger("bfintmr%d", st->timer_num); + st->trig = iio_trigger_alloc("bfintmr%d", st->timer_num); if (!st->trig) { ret = -ENOMEM; goto out1; @@ -203,7 +203,7 @@ static int __devinit iio_bfin_tmr_trigger_probe(struct platform_device *pdev) out4: iio_trigger_unregister(st->trig); out2: - iio_put_trigger(st->trig); + iio_trigger_put(st->trig); out1: kfree(st); out: @@ -217,7 +217,7 @@ static int __devexit iio_bfin_tmr_trigger_remove(struct platform_device *pdev) disable_gptimers(st->t->bit); free_irq(st->irq, st); iio_trigger_unregister(st->trig); - iio_put_trigger(st->trig); + iio_trigger_put(st->trig); kfree(st); return 0; diff --git a/drivers/staging/iio/trigger/iio-trig-gpio.c b/drivers/staging/iio/trigger/iio-trig-gpio.c index a3465947235..90b26846fc6 100644 --- a/drivers/staging/iio/trigger/iio-trig-gpio.c +++ b/drivers/staging/iio/trigger/iio-trig-gpio.c @@ -22,8 +22,8 @@ #include <linux/gpio.h> #include <linux/slab.h> -#include "../iio.h" -#include "../trigger.h" +#include <linux/iio/iio.h> +#include <linux/iio/trigger.h> static LIST_HEAD(iio_gpio_trigger_list); static DEFINE_MUTEX(iio_gpio_trigger_list_lock); @@ -72,7 +72,7 @@ static int iio_gpio_trigger_probe(struct platform_device *pdev) for (irq = irq_res->start; irq <= irq_res->end; irq++) { - trig = iio_allocate_trigger("irqtrig%d", irq); + trig = iio_trigger_alloc("irqtrig%d", irq); if (!trig) { ret = -ENOMEM; goto error_free_completed_registrations; @@ -114,7 +114,7 @@ error_release_irq: error_free_trig_info: kfree(trig_info); error_put_trigger: - iio_put_trigger(trig); + iio_trigger_put(trig); error_free_completed_registrations: /* The rest should have been added to the iio_gpio_trigger_list */ list_for_each_entry_safe(trig, @@ -144,7 +144,7 @@ static int iio_gpio_trigger_remove(struct platform_device *pdev) iio_trigger_unregister(trig); free_irq(trig_info->irq, trig); kfree(trig_info); - iio_put_trigger(trig); + iio_trigger_put(trig); } mutex_unlock(&iio_gpio_trigger_list_lock); diff --git a/drivers/staging/iio/trigger/iio-trig-periodic-rtc.c b/drivers/staging/iio/trigger/iio-trig-periodic-rtc.c index a80cf67bf84..9f2d055524a 100644 --- a/drivers/staging/iio/trigger/iio-trig-periodic-rtc.c +++ b/drivers/staging/iio/trigger/iio-trig-periodic-rtc.c @@ -16,8 +16,8 @@ #include <linux/module.h> #include <linux/slab.h> #include <linux/rtc.h> -#include "../iio.h" -#include "../trigger.h" +#include <linux/iio/iio.h> +#include <linux/iio/trigger.h> static LIST_HEAD(iio_prtc_trigger_list); static DEFINE_MUTEX(iio_prtc_trigger_list_lock); @@ -112,7 +112,7 @@ static int iio_trig_periodic_rtc_probe(struct platform_device *dev) for (i = 0;; i++) { if (pdata[i] == NULL) break; - trig = iio_allocate_trigger("periodic%s", pdata[i]); + trig = iio_trigger_alloc("periodic%s", pdata[i]); if (!trig) { ret = -ENOMEM; goto error_free_completed_registrations; @@ -152,7 +152,7 @@ error_free_trig_info: kfree(trig_info); error_put_trigger_and_remove_from_list: list_del(&trig->alloc_list); - iio_put_trigger(trig); + iio_trigger_put(trig); error_free_completed_registrations: list_for_each_entry_safe(trig, trig2, diff --git a/drivers/staging/iio/trigger/iio-trig-sysfs.c b/drivers/staging/iio/trigger/iio-trig-sysfs.c index 174dc65709d..552763bb3d4 100644 --- a/drivers/staging/iio/trigger/iio-trig-sysfs.c +++ b/drivers/staging/iio/trigger/iio-trig-sysfs.c @@ -11,8 +11,8 @@ #include <linux/slab.h> #include <linux/list.h> -#include "../iio.h" -#include "../trigger.h" +#include <linux/iio/iio.h> +#include <linux/iio/trigger.h> struct iio_sysfs_trig { struct iio_trigger *trig; @@ -139,7 +139,7 @@ static int iio_sysfs_trigger_probe(int id) goto out1; } t->id = id; - t->trig = iio_allocate_trigger("sysfstrig%d", id); + t->trig = iio_trigger_alloc("sysfstrig%d", id); if (!t->trig) { ret = -ENOMEM; goto free_t; @@ -158,7 +158,7 @@ static int iio_sysfs_trigger_probe(int id) return 0; out2: - iio_put_trigger(t->trig); + iio_trigger_put(t->trig); free_t: kfree(t); out1: @@ -182,7 +182,7 @@ static int iio_sysfs_trigger_remove(int id) } iio_trigger_unregister(t->trig); - iio_free_trigger(t->trig); + iio_trigger_free(t->trig); list_del(&t->l); kfree(t); diff --git a/drivers/staging/iio/trigger_consumer.h b/drivers/staging/iio/trigger_consumer.h deleted file mode 100644 index 60d64b35694..00000000000 --- a/drivers/staging/iio/trigger_consumer.h +++ /dev/null @@ -1,52 +0,0 @@ -/* The industrial I/O core, trigger consumer functions - * - * Copyright (c) 2008-2011 Jonathan Cameron - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ - -/** - * struct iio_poll_func - poll function pair - * - * @indio_dev: data specific to device (passed into poll func) - * @h: the function that is actually run on trigger - * @thread: threaded interrupt part - * @type: the type of interrupt (basically if oneshot) - * @name: name used to identify the trigger consumer. - * @irq: the corresponding irq as allocated from the - * trigger pool - * @timestamp: some devices need a timestamp grabbed as soon - * as possible after the trigger - hence handler - * passes it via here. - **/ -struct iio_poll_func { - struct iio_dev *indio_dev; - irqreturn_t (*h)(int irq, void *p); - irqreturn_t (*thread)(int irq, void *p); - int type; - char *name; - int irq; - s64 timestamp; -}; - - -struct iio_poll_func -*iio_alloc_pollfunc(irqreturn_t (*h)(int irq, void *p), - irqreturn_t (*thread)(int irq, void *p), - int type, - struct iio_dev *indio_dev, - const char *fmt, - ...); -void iio_dealloc_pollfunc(struct iio_poll_func *pf); -irqreturn_t iio_pollfunc_store_time(int irq, void *p); - -void iio_trigger_notify_done(struct iio_trigger *trig); - -/* - * Two functions for common case where all that happens is a pollfunc - * is attached and detached from a trigger - */ -int iio_triggered_buffer_postenable(struct iio_dev *indio_dev); -int iio_triggered_buffer_predisable(struct iio_dev *indio_dev); diff --git a/drivers/staging/iio/types.h b/drivers/staging/iio/types.h deleted file mode 100644 index 0c321366690..00000000000 --- a/drivers/staging/iio/types.h +++ /dev/null @@ -1,53 +0,0 @@ -/* industrial I/O data types needed both in and out of kernel - * - * Copyright (c) 2008 Jonathan Cameron - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ - -#ifndef _IIO_TYPES_H_ -#define _IIO_TYPES_H_ - -enum iio_chan_type { - /* real channel types */ - IIO_VOLTAGE, - IIO_CURRENT, - IIO_POWER, - IIO_ACCEL, - IIO_ANGL_VEL, - IIO_MAGN, - IIO_LIGHT, - IIO_INTENSITY, - IIO_PROXIMITY, - IIO_TEMP, - IIO_INCLI, - IIO_ROT, - IIO_ANGL, - IIO_TIMESTAMP, - IIO_CAPACITANCE, -}; - -enum iio_modifier { - IIO_NO_MOD, - IIO_MOD_X, - IIO_MOD_Y, - IIO_MOD_Z, - IIO_MOD_X_AND_Y, - IIO_MOD_X_AND_Z, - IIO_MOD_Y_AND_Z, - IIO_MOD_X_AND_Y_AND_Z, - IIO_MOD_X_OR_Y, - IIO_MOD_X_OR_Z, - IIO_MOD_Y_OR_Z, - IIO_MOD_X_OR_Y_OR_Z, - IIO_MOD_LIGHT_BOTH, - IIO_MOD_LIGHT_IR, -}; - -#define IIO_VAL_INT 1 -#define IIO_VAL_INT_PLUS_MICRO 2 -#define IIO_VAL_INT_PLUS_NANO 3 - -#endif /* _IIO_TYPES_H_ */ diff --git a/drivers/staging/line6/driver.c b/drivers/staging/line6/driver.c index e8023afd365..4513f78f112 100644 --- a/drivers/staging/line6/driver.c +++ b/drivers/staging/line6/driver.c @@ -92,15 +92,10 @@ const unsigned char line6_midi_id[] = { Code to request version of POD, Variax interface (and maybe other devices). */ -static const char line6_request_version0[] = { +static const char line6_request_version[] = { 0xf0, 0x7e, 0x7f, 0x06, 0x01, 0xf7 }; -/* - Copy of version request code with GFP_KERNEL flag for use in URB. -*/ -static const char *line6_request_version; - struct usb_line6 *line6_devices[LINE6_MAX_DEVICES]; /** @@ -336,8 +331,21 @@ int line6_send_raw_message_async(struct usb_line6 *line6, const char *buffer, */ int line6_version_request_async(struct usb_line6 *line6) { - return line6_send_raw_message_async(line6, line6_request_version, - sizeof(line6_request_version0)); + char *buffer; + int retval; + + buffer = kmalloc(sizeof(line6_request_version), GFP_ATOMIC); + if (buffer == NULL) { + dev_err(line6->ifcdev, "Out of memory"); + return -ENOMEM; + } + + memcpy(buffer, line6_request_version, sizeof(line6_request_version)); + + retval = line6_send_raw_message_async(line6, buffer, + sizeof(line6_request_version)); + kfree(buffer); + return retval; } /* @@ -1292,69 +1300,7 @@ static struct usb_driver line6_driver = { .id_table = line6_id_table, }; -/* - Module initialization. -*/ -static int __init line6_init(void) -{ - int i, retval; - - printk(KERN_INFO "%s driver version %s\n", DRIVER_NAME, DRIVER_VERSION); - - for (i = LINE6_MAX_DEVICES; i--;) - line6_devices[i] = NULL; - - retval = usb_register(&line6_driver); - - if (retval) { - err("usb_register failed. Error number %d", retval); - return retval; - } - - line6_request_version = kmalloc(sizeof(line6_request_version0), - GFP_KERNEL); - - if (line6_request_version == NULL) { - err("Out of memory"); - return -ENOMEM; - } - - memcpy((char *)line6_request_version, line6_request_version0, - sizeof(line6_request_version0)); - - return retval; -} - -/* - Module cleanup. -*/ -static void __exit line6_exit(void) -{ - int i; - struct usb_line6 *line6; - struct snd_line6_pcm *line6pcm; - - /* stop all PCM channels */ - for (i = LINE6_MAX_DEVICES; i--;) { - line6 = line6_devices[i]; - - if (line6 == NULL) - continue; - - line6pcm = line6->line6pcm; - - if (line6pcm == NULL) - continue; - - line6_pcm_release(line6pcm, ~0); - } - - usb_deregister(&line6_driver); - kfree(line6_request_version); -} - -module_init(line6_init); -module_exit(line6_exit); +module_usb_driver(line6_driver); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); diff --git a/drivers/staging/line6/toneport.c b/drivers/staging/line6/toneport.c index b754f69a29c..31b624b6342 100644 --- a/drivers/staging/line6/toneport.c +++ b/drivers/staging/line6/toneport.c @@ -168,7 +168,7 @@ static int toneport_send_cmd(struct usb_device *usbdev, int cmd1, int cmd2) cmd1, cmd2, NULL, 0, LINE6_TIMEOUT * HZ); if (ret < 0) { - err("send failed (error %d)\n", ret); + dev_err(&usbdev->dev, "send failed (error %d)\n", ret); return ret; } diff --git a/drivers/staging/media/as102/as102_fe.c b/drivers/staging/media/as102/as102_fe.c index 5917657b9d0..9ce8c9daa2e 100644 --- a/drivers/staging/media/as102/as102_fe.c +++ b/drivers/staging/media/as102/as102_fe.c @@ -17,8 +17,6 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include <linux/version.h> - #include "as102_drv.h" #include "as10x_types.h" #include "as10x_cmd.h" diff --git a/drivers/staging/media/as102/as102_fw.c b/drivers/staging/media/as102/as102_fw.c index 1075fb1df0d..b9670ee41b4 100644 --- a/drivers/staging/media/as102/as102_fw.c +++ b/drivers/staging/media/as102/as102_fw.c @@ -230,11 +230,8 @@ int as102_fw_upload(struct as10x_bus_adapter_t *bus_adap) pr_info("%s: firmware: %s loaded with success\n", DRIVER_NAME, fw2); error: - /* free data buffer */ kfree(cmd_buf); - /* release firmware if needed */ - if (firmware != NULL) - release_firmware(firmware); + release_firmware(firmware); LEAVE(); return errno; diff --git a/drivers/staging/media/as102/as102_usb_drv.c b/drivers/staging/media/as102/as102_usb_drv.c index 0f6bfe7eccb..36150e5c62d 100644 --- a/drivers/staging/media/as102/as102_usb_drv.c +++ b/drivers/staging/media/as102/as102_usb_drv.c @@ -367,7 +367,7 @@ static int as102_usb_probe(struct usb_interface *intf, ENTER(); /* This should never actually happen */ - if ((sizeof(as102_usb_id_table) / sizeof(struct usb_device_id)) != + if (ARRAY_SIZE(as102_usb_id_table) != (sizeof(as102_device_names) / sizeof(const char *))) { pr_err("Device names table invalid size"); return -EINVAL; @@ -380,8 +380,7 @@ static int as102_usb_probe(struct usb_interface *intf, } /* Assign the user-friendly device name */ - for (i = 0; i < (sizeof(as102_usb_id_table) / - sizeof(struct usb_device_id)); i++) { + for (i = 0; i < ARRAY_SIZE(as102_usb_id_table); i++) { if (id == &as102_usb_id_table[i]) { as102_dev->name = as102_device_names[i]; as102_dev->elna_cfg = as102_elna_cfg[i]; diff --git a/drivers/staging/media/as102/as102_usb_drv.h b/drivers/staging/media/as102/as102_usb_drv.h index fc2884ab02a..1ad1ec52b11 100644 --- a/drivers/staging/media/as102/as102_usb_drv.h +++ b/drivers/staging/media/as102/as102_usb_drv.h @@ -17,8 +17,6 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include <linux/version.h> - #ifndef _AS102_USB_DRV_H_ #define _AS102_USB_DRV_H_ diff --git a/drivers/staging/media/easycap/easycap_ioctl.c b/drivers/staging/media/easycap/easycap_ioctl.c index 9413b37490c..3cee3cd986d 100644 --- a/drivers/staging/media/easycap/easycap_ioctl.c +++ b/drivers/staging/media/easycap/easycap_ioctl.c @@ -26,6 +26,7 @@ /*****************************************************************************/ #include "easycap.h" +#include <linux/version.h> /*--------------------------------------------------------------------------*/ /* diff --git a/drivers/staging/media/easycap/easycap_main.c b/drivers/staging/media/easycap/easycap_main.c index d0fe34afc2e..6f83d362ab0 100644 --- a/drivers/staging/media/easycap/easycap_main.c +++ b/drivers/staging/media/easycap/easycap_main.c @@ -3578,7 +3578,8 @@ static int easycap_usb_probe(struct usb_interface *intf, if (0 != (video_register_device(&(peasycap->video_device), VFL_TYPE_GRABBER, -1))) { - err("Not able to register with videodev"); + dev_err(&intf->dev, + "Not able to register with videodev\n"); videodev_release(&(peasycap->video_device)); return -ENODEV; } @@ -3822,7 +3823,8 @@ static int easycap_usb_probe(struct usb_interface *intf, rc = easycap_alsa_probe(peasycap); if (rc) { - err("easycap_alsa_probe() rc = %i\n", rc); + dev_err(&intf->dev, "easycap_alsa_probe() rc = %i\n", + rc); return -ENODEV; } diff --git a/drivers/staging/media/go7007/README b/drivers/staging/media/go7007/README index 48f44763781..aeba1324a9c 100644 --- a/drivers/staging/media/go7007/README +++ b/drivers/staging/media/go7007/README @@ -6,6 +6,6 @@ Todo: - testing? - handle churn in v4l layer. -Please send patchs to Greg Kroah-Hartman <greg@kroah.com> and Cc: Ross +Please send patches to Greg Kroah-Hartman <greg@linuxfoundation.org> and Cc: Ross Cohen <rcohen@snurgle.org> as well. diff --git a/drivers/staging/media/go7007/s2250-loader.c b/drivers/staging/media/go7007/s2250-loader.c index 4e132519e25..7c5af4f289b 100644 --- a/drivers/staging/media/go7007/s2250-loader.c +++ b/drivers/staging/media/go7007/s2250-loader.c @@ -160,31 +160,7 @@ static struct usb_driver s2250loader_driver = { .id_table = s2250loader_ids, }; -static int __init s2250loader_init(void) -{ - int r; - unsigned i = 0; - - for (i = 0; i < MAX_DEVICES; i++) - s2250_dev_table[i] = NULL; - - r = usb_register(&s2250loader_driver); - if (r) { - printk(KERN_ERR "usb_register failed. Error number %d\n", r); - return -1; - } - - printk(KERN_INFO "s2250loader_init: driver registered\n"); - return 0; -} -module_init(s2250loader_init); - -static void __exit s2250loader_cleanup(void) -{ - printk(KERN_INFO "s2250loader_cleanup\n"); - usb_deregister(&s2250loader_driver); -} -module_exit(s2250loader_cleanup); +module_usb_driver(s2250loader_driver); MODULE_AUTHOR(""); MODULE_DESCRIPTION("firmware loader for Sensoray 2250/2251"); diff --git a/drivers/staging/media/lirc/lirc_imon.c b/drivers/staging/media/lirc/lirc_imon.c index 5f7f8cd3a66..d7cf5ef076a 100644 --- a/drivers/staging/media/lirc/lirc_imon.c +++ b/drivers/staging/media/lirc/lirc_imon.c @@ -209,8 +209,9 @@ static void deregister_from_lirc(struct imon_context *context) retval = lirc_unregister_driver(minor); if (retval) - err("%s: unable to deregister from lirc(%d)", - __func__, retval); + printk(KERN_ERR KBUILD_MODNAME + ": %s: unable to deregister from lirc(%d)", + __func__, retval); else printk(KERN_INFO MOD_NAME ": Deregistered iMON driver " "(minor:%d)\n", minor); @@ -234,16 +235,18 @@ static int display_open(struct inode *inode, struct file *file) subminor = iminor(inode); interface = usb_find_interface(&imon_driver, subminor); if (!interface) { - err("%s: could not find interface for minor %d", - __func__, subminor); + printk(KERN_ERR KBUILD_MODNAME + ": %s: could not find interface for minor %d\n", + __func__, subminor); retval = -ENODEV; goto exit; } context = usb_get_intfdata(interface); if (!context) { - err("%s: no context found for minor %d", - __func__, subminor); + dev_err(&interface->dev, + "%s: no context found for minor %d\n", + __func__, subminor); retval = -ENODEV; goto exit; } @@ -251,10 +254,12 @@ static int display_open(struct inode *inode, struct file *file) mutex_lock(&context->ctx_lock); if (!context->display) { - err("%s: display not supported by device", __func__); + dev_err(&interface->dev, + "%s: display not supported by device\n", __func__); retval = -ENODEV; } else if (context->display_isopen) { - err("%s: display port is already open", __func__); + dev_err(&interface->dev, + "%s: display port is already open\n", __func__); retval = -EBUSY; } else { context->display_isopen = 1; @@ -281,17 +286,20 @@ static int display_close(struct inode *inode, struct file *file) context = file->private_data; if (!context) { - err("%s: no context for device", __func__); + printk(KERN_ERR KBUILD_MODNAME + "%s: no context for device\n", __func__); return -ENODEV; } mutex_lock(&context->ctx_lock); if (!context->display) { - err("%s: display not supported by device", __func__); + dev_err(&context->usbdev->dev, + "%s: display not supported by device\n", __func__); retval = -ENODEV; } else if (!context->display_isopen) { - err("%s: display is not open", __func__); + dev_err(&context->usbdev->dev, + "%s: display is not open\n", __func__); retval = -EIO; } else { context->display_isopen = 0; @@ -340,19 +348,23 @@ static int send_packet(struct imon_context *context) retval = usb_submit_urb(context->tx_urb, GFP_KERNEL); if (retval) { atomic_set(&(context->tx.busy), 0); - err("%s: error submitting urb(%d)", __func__, retval); + dev_err(&context->usbdev->dev, + "%s: error submitting urb(%d)\n", __func__, retval); } else { /* Wait for transmission to complete (or abort) */ mutex_unlock(&context->ctx_lock); retval = wait_for_completion_interruptible( &context->tx.finished); if (retval) - err("%s: task interrupted", __func__); + dev_err(&context->usbdev->dev, + "%s: task interrupted\n", __func__); mutex_lock(&context->ctx_lock); retval = context->tx.status; if (retval) - err("%s: packet tx failed (%d)", __func__, retval); + dev_err(&context->usbdev->dev, + "%s: packet tx failed (%d)\n", + __func__, retval); } return retval; @@ -383,20 +395,23 @@ static ssize_t vfd_write(struct file *file, const char __user *buf, context = file->private_data; if (!context) { - err("%s: no context for device", __func__); + printk(KERN_ERR KBUILD_MODNAME + "%s: no context for device\n", __func__); return -ENODEV; } mutex_lock(&context->ctx_lock); if (!context->dev_present) { - err("%s: no iMON device present", __func__); + dev_err(&context->usbdev->dev, + "%s: no iMON device present\n", __func__); retval = -ENODEV; goto exit; } if (n_bytes <= 0 || n_bytes > IMON_DATA_BUF_SZ - 3) { - err("%s: invalid payload size", __func__); + dev_err(&context->usbdev->dev, + "%s: invalid payload size\n", __func__); retval = -EINVAL; goto exit; } @@ -425,8 +440,9 @@ static ssize_t vfd_write(struct file *file, const char __user *buf, retval = send_packet(context); if (retval) { - err("%s: send packet failed for packet #%d", - __func__, seq/2); + dev_err(&context->usbdev->dev, + "%s: send packet failed for packet #%d\n", + __func__, seq/2); goto exit; } else { seq += 2; @@ -441,7 +457,8 @@ static ssize_t vfd_write(struct file *file, const char __user *buf, context->usb_tx_buf[7] = (unsigned char) seq; retval = send_packet(context); if (retval) - err("%s: send packet failed for packet #%d", + dev_err(&context->usbdev->dev, + "%s: send packet failed for packet #%d\n", __func__, seq/2); } @@ -508,7 +525,8 @@ static void ir_close(void *data) context = (struct imon_context *)data; if (!context) { - err("%s: no context for device", __func__); + printk(KERN_ERR KBUILD_MODNAME + "%s: no context for device\n", __func__); return; } @@ -732,7 +750,7 @@ static int imon_probe(struct usb_interface *interface, context = kzalloc(sizeof(struct imon_context), GFP_KERNEL); if (!context) { - err("%s: kzalloc failed for context", __func__); + dev_err(dev, "%s: kzalloc failed for context\n", __func__); alloc_status = 1; goto alloc_status_switch; } @@ -797,7 +815,7 @@ static int imon_probe(struct usb_interface *interface, /* Input endpoint is mandatory */ if (!ir_ep_found) { - err("%s: no valid input (IR) endpoint found.", __func__); + dev_err(dev, "%s: no valid input (IR) endpoint found.\n", __func__); retval = -ENODEV; alloc_status = 2; goto alloc_status_switch; @@ -814,30 +832,30 @@ static int imon_probe(struct usb_interface *interface, driver = kzalloc(sizeof(struct lirc_driver), GFP_KERNEL); if (!driver) { - err("%s: kzalloc failed for lirc_driver", __func__); + dev_err(dev, "%s: kzalloc failed for lirc_driver\n", __func__); alloc_status = 2; goto alloc_status_switch; } rbuf = kmalloc(sizeof(struct lirc_buffer), GFP_KERNEL); if (!rbuf) { - err("%s: kmalloc failed for lirc_buffer", __func__); + dev_err(dev, "%s: kmalloc failed for lirc_buffer\n", __func__); alloc_status = 3; goto alloc_status_switch; } if (lirc_buffer_init(rbuf, BUF_CHUNK_SIZE, BUF_SIZE)) { - err("%s: lirc_buffer_init failed", __func__); + dev_err(dev, "%s: lirc_buffer_init failed\n", __func__); alloc_status = 4; goto alloc_status_switch; } rx_urb = usb_alloc_urb(0, GFP_KERNEL); if (!rx_urb) { - err("%s: usb_alloc_urb failed for IR urb", __func__); + dev_err(dev, "%s: usb_alloc_urb failed for IR urb\n", __func__); alloc_status = 5; goto alloc_status_switch; } tx_urb = usb_alloc_urb(0, GFP_KERNEL); if (!tx_urb) { - err("%s: usb_alloc_urb failed for display urb", + dev_err(dev, "%s: usb_alloc_urb failed for display urb\n", __func__); alloc_status = 6; goto alloc_status_switch; @@ -865,7 +883,7 @@ static int imon_probe(struct usb_interface *interface, lirc_minor = lirc_register_driver(driver); if (lirc_minor < 0) { - err("%s: lirc_register_driver failed", __func__); + dev_err(dev, "%s: lirc_register_driver failed\n", __func__); alloc_status = 7; goto unlock; } else @@ -900,8 +918,8 @@ static int imon_probe(struct usb_interface *interface, retval = usb_submit_urb(context->rx_urb, GFP_KERNEL); if (retval) { - err("%s: usb_submit_urb failed for intf0 (%d)", - __func__, retval); + dev_err(dev, "%s: usb_submit_urb failed for intf0 (%d)\n", + __func__, retval); mutex_unlock(&context->ctx_lock); goto exit; } diff --git a/drivers/staging/media/lirc/lirc_sasem.c b/drivers/staging/media/lirc/lirc_sasem.c index 74421043b95..352a20229ca 100644 --- a/drivers/staging/media/lirc/lirc_sasem.c +++ b/drivers/staging/media/lirc/lirc_sasem.c @@ -185,7 +185,7 @@ static void deregister_from_lirc(struct sasem_context *context) retval = lirc_unregister_driver(minor); if (retval) - err("%s: unable to deregister from lirc (%d)", + printk(KERN_ERR "%s: unable to deregister from lirc (%d)\n", __func__, retval); else printk(KERN_INFO "Deregistered Sasem driver (minor:%d)\n", @@ -210,16 +210,18 @@ static int vfd_open(struct inode *inode, struct file *file) subminor = iminor(inode); interface = usb_find_interface(&sasem_driver, subminor); if (!interface) { - err("%s: could not find interface for minor %d", - __func__, subminor); + printk(KERN_ERR KBUILD_MODNAME + ": %s: could not find interface for minor %d\n", + __func__, subminor); retval = -ENODEV; goto exit; } context = usb_get_intfdata(interface); if (!context) { - err("%s: no context found for minor %d", - __func__, subminor); + dev_err(&interface->dev, + "%s: no context found for minor %d\n", + __func__, subminor); retval = -ENODEV; goto exit; } @@ -227,12 +229,13 @@ static int vfd_open(struct inode *inode, struct file *file) mutex_lock(&context->ctx_lock); if (context->vfd_isopen) { - err("%s: VFD port is already open", __func__); + dev_err(&interface->dev, + "%s: VFD port is already open", __func__); retval = -EBUSY; } else { context->vfd_isopen = 1; file->private_data = context; - printk(KERN_INFO "VFD port opened\n"); + dev_info(&interface->dev, "VFD port opened\n"); } mutex_unlock(&context->ctx_lock); @@ -253,7 +256,8 @@ static long vfd_ioctl(struct file *file, unsigned cmd, unsigned long arg) context = (struct sasem_context *) file->private_data; if (!context) { - err("%s: no context for device", __func__); + printk(KERN_ERR KBUILD_MODNAME + ": %s: no context for device\n", __func__); return -ENODEV; } @@ -287,14 +291,15 @@ static int vfd_close(struct inode *inode, struct file *file) context = (struct sasem_context *) file->private_data; if (!context) { - err("%s: no context for device", __func__); + printk(KERN_ERR KBUILD_MODNAME + ": %s: no context for device\n", __func__); return -ENODEV; } mutex_lock(&context->ctx_lock); if (!context->vfd_isopen) { - err("%s: VFD is not open", __func__); + dev_err(&context->dev->dev, "%s: VFD is not open\n", __func__); retval = -EIO; } else { context->vfd_isopen = 0; @@ -339,7 +344,8 @@ static int send_packet(struct sasem_context *context) retval = usb_submit_urb(context->tx_urb, GFP_KERNEL); if (retval) { atomic_set(&(context->tx.busy), 0); - err("%s: error submitting urb (%d)", __func__, retval); + dev_err(&context->dev->dev, "%s: error submitting urb (%d)\n", + __func__, retval); } else { /* Wait for transmission to complete (or abort) */ mutex_unlock(&context->ctx_lock); @@ -348,7 +354,9 @@ static int send_packet(struct sasem_context *context) retval = context->tx.status; if (retval) - err("%s: packet tx failed (%d)", __func__, retval); + dev_err(&context->dev->dev, + "%s: packet tx failed (%d)\n", + __func__, retval); } return retval; @@ -369,20 +377,23 @@ static ssize_t vfd_write(struct file *file, const char *buf, context = (struct sasem_context *) file->private_data; if (!context) { - err("%s: no context for device", __func__); + printk(KERN_ERR KBUILD_MODNAME + ": %s: no context for device\n", __func__); return -ENODEV; } mutex_lock(&context->ctx_lock); if (!context->dev_present) { - err("%s: no Sasem device present", __func__); + printk(KERN_ERR KBUILD_MODNAME + ": %s: no Sasem device present\n", __func__); retval = -ENODEV; goto exit; } if (n_bytes <= 0 || n_bytes > SASEM_DATA_BUF_SZ) { - err("%s: invalid payload size", __func__); + dev_err(&context->dev->dev, "%s: invalid payload size\n", + __func__); retval = -EINVAL; goto exit; } @@ -440,9 +451,9 @@ static ssize_t vfd_write(struct file *file, const char *buf, } retval = send_packet(context); if (retval) { - - err("%s: send packet failed for packet #%d", - __func__, i); + dev_err(&context->dev->dev, + "%s: send packet failed for packet #%d\n", + __func__, i); goto exit; } } @@ -492,7 +503,8 @@ static int ir_open(void *data) mutex_lock(&context->ctx_lock); if (context->ir_isopen) { - err("%s: IR port is already open", __func__); + dev_err(&context->dev->dev, "%s: IR port is already open\n", + __func__); retval = -EBUSY; goto exit; } @@ -506,8 +518,9 @@ static int ir_open(void *data) retval = usb_submit_urb(context->rx_urb, GFP_KERNEL); if (retval) - err("%s: usb_submit_urb failed for ir_open (%d)", - __func__, retval); + dev_err(&context->dev->dev, + "%s: usb_submit_urb failed for ir_open (%d)\n", + __func__, retval); else { context->ir_isopen = 1; printk(KERN_INFO "IR port opened\n"); @@ -529,7 +542,8 @@ static void ir_close(void *data) context = (struct sasem_context *)data; if (!context) { - err("%s: no context for device", __func__); + printk(KERN_ERR KBUILD_MODNAME + ": %s: no context for device\n", __func__); return; } @@ -687,7 +701,7 @@ static int sasem_probe(struct usb_interface *interface, struct sasem_context *context = NULL; int i; - printk(KERN_INFO "%s: found Sasem device\n", __func__); + dev_info(&interface->dev, "%s: found Sasem device\n", __func__); dev = usb_get_dev(interface_to_usbdev(interface)); @@ -719,8 +733,8 @@ static int sasem_probe(struct usb_interface *interface, rx_endpoint = ep; ir_ep_found = 1; if (debug) - printk(KERN_INFO "%s: found IR endpoint\n", - __func__); + dev_info(&interface->dev, + "%s: found IR endpoint\n", __func__); } else if (!vfd_ep_found && ep_dir == USB_DIR_OUT && @@ -729,22 +743,23 @@ static int sasem_probe(struct usb_interface *interface, tx_endpoint = ep; vfd_ep_found = 1; if (debug) - printk(KERN_INFO "%s: found VFD endpoint\n", - __func__); + dev_info(&interface->dev, + "%s: found VFD endpoint\n", __func__); } } /* Input endpoint is mandatory */ if (!ir_ep_found) { - - err("%s: no valid input (IR) endpoint found.", __func__); + dev_err(&interface->dev, + "%s: no valid input (IR) endpoint found.\n", __func__); retval = -ENODEV; goto exit; } if (!vfd_ep_found) - printk(KERN_INFO "%s: no valid output (VFD) endpoint found.\n", - __func__); + dev_info(&interface->dev, + "%s: no valid output (VFD) endpoint found.\n", + __func__); /* Allocate memory */ @@ -752,38 +767,44 @@ static int sasem_probe(struct usb_interface *interface, context = kzalloc(sizeof(struct sasem_context), GFP_KERNEL); if (!context) { - err("%s: kzalloc failed for context", __func__); + dev_err(&interface->dev, + "%s: kzalloc failed for context\n", __func__); alloc_status = 1; goto alloc_status_switch; } driver = kzalloc(sizeof(struct lirc_driver), GFP_KERNEL); if (!driver) { - err("%s: kzalloc failed for lirc_driver", __func__); + dev_err(&interface->dev, + "%s: kzalloc failed for lirc_driver\n", __func__); alloc_status = 2; goto alloc_status_switch; } rbuf = kmalloc(sizeof(struct lirc_buffer), GFP_KERNEL); if (!rbuf) { - err("%s: kmalloc failed for lirc_buffer", __func__); + dev_err(&interface->dev, + "%s: kmalloc failed for lirc_buffer\n", __func__); alloc_status = 3; goto alloc_status_switch; } if (lirc_buffer_init(rbuf, BUF_CHUNK_SIZE, BUF_SIZE)) { - err("%s: lirc_buffer_init failed", __func__); + dev_err(&interface->dev, + "%s: lirc_buffer_init failed\n", __func__); alloc_status = 4; goto alloc_status_switch; } rx_urb = usb_alloc_urb(0, GFP_KERNEL); if (!rx_urb) { - err("%s: usb_alloc_urb failed for IR urb", __func__); + dev_err(&interface->dev, + "%s: usb_alloc_urb failed for IR urb\n", __func__); alloc_status = 5; goto alloc_status_switch; } if (vfd_ep_found) { tx_urb = usb_alloc_urb(0, GFP_KERNEL); if (!tx_urb) { - err("%s: usb_alloc_urb failed for VFD urb", - __func__); + dev_err(&interface->dev, + "%s: usb_alloc_urb failed for VFD urb", + __func__); alloc_status = 6; goto alloc_status_switch; } @@ -807,7 +828,8 @@ static int sasem_probe(struct usb_interface *interface, lirc_minor = lirc_register_driver(driver); if (lirc_minor < 0) { - err("%s: lirc_register_driver failed", __func__); + dev_err(&interface->dev, + "%s: lirc_register_driver failed\n", __func__); alloc_status = 7; retval = lirc_minor; goto unlock; diff --git a/drivers/staging/media/lirc/lirc_ttusbir.c b/drivers/staging/media/lirc/lirc_ttusbir.c index 7950887ff11..3bb865c0217 100644 --- a/drivers/staging/media/lirc/lirc_ttusbir.c +++ b/drivers/staging/media/lirc/lirc_ttusbir.c @@ -113,8 +113,9 @@ static int set_use_inc(void *data) for (i = 0; i < num_urbs; i++) { retval = usb_submit_urb(ttusbir->urb[i], GFP_KERNEL); if (retval) { - err("%s: usb_submit_urb failed on urb %d", - __func__, i); + dev_err(&ttusbir->interf->dev, + "%s: usb_submit_urb failed on urb %d\n", + __func__, i); return retval; } } @@ -278,7 +279,7 @@ static int probe(struct usb_interface *intf, const struct usb_device_id *id) if (ttusbir->alt_setting != -1) DPRINTK("alt setting: %d\n", ttusbir->alt_setting); else { - err("Could not find alternate setting\n"); + dev_err(&intf->dev, "Could not find alternate setting\n"); kfree(ttusbir); return -EINVAL; } @@ -291,7 +292,7 @@ static int probe(struct usb_interface *intf, const struct usb_device_id *id) /* Register as a LIRC driver */ if (lirc_buffer_init(&ttusbir->rbuf, sizeof(int), 256) < 0) { - err("Could not get memory for LIRC data buffer\n"); + dev_err(&intf->dev, "Could not get memory for LIRC data buffer\n"); usb_set_intfdata(intf, NULL); kfree(ttusbir); return -ENOMEM; @@ -310,7 +311,7 @@ static int probe(struct usb_interface *intf, const struct usb_device_id *id) ttusbir->driver.features = LIRC_CAN_REC_MODE2; ttusbir->minor = lirc_register_driver(&ttusbir->driver); if (ttusbir->minor < 0) { - err("Error registering as LIRC driver\n"); + dev_err(&intf->dev, "Error registering as LIRC driver\n"); usb_set_intfdata(intf, NULL); lirc_buffer_free(&ttusbir->rbuf); kfree(ttusbir); @@ -321,7 +322,7 @@ static int probe(struct usb_interface *intf, const struct usb_device_id *id) for (i = 0; i < num_urbs; i++) { ttusbir->urb[i] = usb_alloc_urb(8, GFP_KERNEL); if (!ttusbir->urb[i]) { - err("Could not allocate memory for the URB\n"); + dev_err(&intf->dev, "Could not allocate memory for the URB\n"); for (j = i - 1; j >= 0; j--) kfree(ttusbir->urb[j]); lirc_buffer_free(&ttusbir->rbuf); diff --git a/drivers/staging/net/Kconfig b/drivers/staging/net/Kconfig new file mode 100644 index 00000000000..a64e56b1898 --- /dev/null +++ b/drivers/staging/net/Kconfig @@ -0,0 +1,38 @@ +if NETDEVICES + +if WAN + +config PC300 + tristate "Cyclades-PC300 support (RS-232/V.35, X.21, T1/E1 boards)" + depends on HDLC && PCI && BROKEN + ---help--- + This driver is broken because of struct tty_driver change. + + Driver for the Cyclades-PC300 synchronous communication boards. + + These boards provide synchronous serial interfaces to your + Linux box (interfaces currently available are RS-232/V.35, X.21 and + T1/E1). If you wish to support Multilink PPP, please select the + option later and read the file README.mlppp provided by PC300 + package. + + To compile this as a module, choose M here: the module + will be called pc300. + + If unsure, say N. + +config PC300_MLPPP + bool "Cyclades-PC300 MLPPP support" + depends on PC300 && PPP_MULTILINK && PPP_SYNC_TTY && HDLC_PPP + help + Multilink PPP over the PC300 synchronous communication boards. + +comment "Cyclades-PC300 MLPPP support is disabled." + depends on HDLC && PC300 && (PPP=n || !PPP_MULTILINK || PPP_SYNC_TTY=n || !HDLC_PPP) + +comment "Refer to the file README.mlppp, provided by PC300 package." + depends on HDLC && PC300 && (PPP=n || !PPP_MULTILINK || PPP_SYNC_TTY=n || !HDLC_PPP) + +endif # WAN + +endif # NETDEVICES diff --git a/drivers/staging/net/Makefile b/drivers/staging/net/Makefile new file mode 100644 index 00000000000..0799c43d511 --- /dev/null +++ b/drivers/staging/net/Makefile @@ -0,0 +1,5 @@ +pc300-y := pc300_drv.o +pc300-$(CONFIG_PC300_MLPPP) += pc300_tty.o +pc300-objs := $(pc300-y) + +obj-$(CONFIG_PC300) += pc300.o diff --git a/drivers/staging/net/TODO b/drivers/staging/net/TODO new file mode 100644 index 00000000000..e3446f2ad7c --- /dev/null +++ b/drivers/staging/net/TODO @@ -0,0 +1,5 @@ +PC300 +The driver is very broken and cannot work with the current TTY layer. It is +inevitable to convert it to the new TTY API. + +If no one steps in to adopt the driver, it will be removed in the 3.7 release. diff --git a/drivers/net/wan/pc300-falc-lh.h b/drivers/staging/net/pc300-falc-lh.h index 01ed23ca76c..01ed23ca76c 100644 --- a/drivers/net/wan/pc300-falc-lh.h +++ b/drivers/staging/net/pc300-falc-lh.h diff --git a/drivers/net/wan/pc300.h b/drivers/staging/net/pc300.h index 2e4f84f6cad..2e4f84f6cad 100644 --- a/drivers/net/wan/pc300.h +++ b/drivers/staging/net/pc300.h diff --git a/drivers/net/wan/pc300_drv.c b/drivers/staging/net/pc300_drv.c index cb0f8d932b0..cb0f8d932b0 100644 --- a/drivers/net/wan/pc300_drv.c +++ b/drivers/staging/net/pc300_drv.c diff --git a/drivers/net/wan/pc300_tty.c b/drivers/staging/net/pc300_tty.c index 4709f422856..4709f422856 100644 --- a/drivers/net/wan/pc300_tty.c +++ b/drivers/staging/net/pc300_tty.c diff --git a/drivers/staging/nvec/nvec.h b/drivers/staging/nvec/nvec.h index a4c17b0e10c..ba6ed8f4e8a 100644 --- a/drivers/staging/nvec/nvec.h +++ b/drivers/staging/nvec/nvec.h @@ -42,7 +42,7 @@ * enum nvec_event_size - The size of an event message * @NVEC_2BYTES: The message has one command byte and one data byte * @NVEC_3BYTES: The message has one command byte and two data bytes - * @NVEC_VAR_SIZE: The message has one command byte, one count byte, and as + * @NVEC_VAR_SIZE: The message has one command byte, one count byte, and has * up to as many bytes as the number in the count byte. The * maximum is 32 * diff --git a/drivers/staging/octeon/ethernet-rx.c b/drivers/staging/octeon/ethernet-rx.c index d91751f9ffe..34afc16bc49 100644 --- a/drivers/staging/octeon/ethernet-rx.c +++ b/drivers/staging/octeon/ethernet-rx.c @@ -163,7 +163,7 @@ static inline int cvm_oct_check_rcv_error(cvmx_wqe_t *work) /* * We received a packet with either an alignment error * or a FCS error. This may be signalling that we are - * running 10Mbps with GMXX_RXX_FRM_CTL[PRE_CHK} + * running 10Mbps with GMXX_RXX_FRM_CTL[PRE_CHK] * off. If this is the case we need to parse the * packet to determine if we can remove a non spec * preamble and generate a correct packet. diff --git a/drivers/staging/octeon/ethernet-tx.c b/drivers/staging/octeon/ethernet-tx.c index 91a97b3e45c..2d4fcea892f 100644 --- a/drivers/staging/octeon/ethernet-tx.c +++ b/drivers/staging/octeon/ethernet-tx.c @@ -62,7 +62,7 @@ * You can define GET_SKBUFF_QOS() to override how the skbuff output * function determines which output queue is used. The default * implementation always uses the base queue for the port. If, for - * example, you wanted to use the skb->priority fieid, define + * example, you wanted to use the skb->priority field, define * GET_SKBUFF_QOS as: #define GET_SKBUFF_QOS(skb) ((skb)->priority) */ #ifndef GET_SKBUFF_QOS @@ -165,8 +165,8 @@ int cvm_oct_xmit(struct sk_buff *skb, struct net_device *dev) #endif /* - * Prefetch the private data structure. It is larger that one - * cache line. + * Prefetch the private data structure. It is larger than the + * one cache line. */ prefetch(priv); @@ -291,8 +291,8 @@ int cvm_oct_xmit(struct sk_buff *skb, struct net_device *dev) * See if we can put this skb in the FPA pool. Any strange * behavior from the Linux networking stack will most likely * be caused by a bug in the following code. If some field is - * in use by the network stack and get carried over when a - * buffer is reused, bad thing may happen. If in doubt and + * in use by the network stack and gets carried over when a + * buffer is reused, bad things may happen. If in doubt and * you dont need the absolute best performance, disable the * define REUSE_SKBUFFS_WITHOUT_FREE. The reuse of buffers has * shown a 25% increase in performance under some loads. diff --git a/drivers/staging/octeon/ethernet-util.h b/drivers/staging/octeon/ethernet-util.h index 144fb99bf50..2da5ce17ead 100644 --- a/drivers/staging/octeon/ethernet-util.h +++ b/drivers/staging/octeon/ethernet-util.h @@ -38,7 +38,7 @@ static inline void *cvm_oct_get_buffer_ptr(union cvmx_buf_ptr packet_ptr) } /** - * INTERFACE - convert IPD port to locgical interface + * INTERFACE - convert IPD port to logical interface * @ipd_port: Port to check * * Returns Logical interface diff --git a/drivers/staging/octeon/ethernet.c b/drivers/staging/octeon/ethernet.c index 60cba8194de..18f7a790f73 100644 --- a/drivers/staging/octeon/ethernet.c +++ b/drivers/staging/octeon/ethernet.c @@ -357,7 +357,7 @@ static void cvm_oct_common_set_multicast_list(struct net_device *dev) /* Force accept multicast packets */ control.s.mcst = 2; else - /* Force reject multicat packets */ + /* Force reject multicast packets */ control.s.mcst = 1; if (dev->flags & IFF_PROMISC) diff --git a/drivers/staging/olpc_dcon/olpc_dcon.c b/drivers/staging/olpc_dcon/olpc_dcon.c index 3d9199320d8..992275c0d87 100644 --- a/drivers/staging/olpc_dcon/olpc_dcon.c +++ b/drivers/staging/olpc_dcon/olpc_dcon.c @@ -71,8 +71,8 @@ static int dcon_hw_init(struct dcon_priv *dcon, int is_init) ver = dcon_read(dcon, DCON_REG_ID); if ((ver >> 8) != 0xDC) { - printk(KERN_ERR "olpc-dcon: DCON ID not 0xDCxx: 0x%04x " - "instead.\n", ver); + printk(KERN_ERR "olpc-dcon: DCON ID not 0xDCxx: 0x%04x instead.\n", + ver); rc = -ENXIO; goto err; } @@ -134,10 +134,10 @@ static int dcon_bus_stabilize(struct dcon_priv *dcon, int is_powered_down) power_up: if (is_powered_down) { x = 1; - x = olpc_ec_cmd(0x26, (unsigned char *) &x, 1, NULL, 0); + x = olpc_ec_cmd(0x26, (unsigned char *)&x, 1, NULL, 0); if (x) { - printk(KERN_WARNING "olpc-dcon: unable to force dcon " - "to power up: %d!\n", x); + printk(KERN_WARNING "olpc-dcon: unable to force dcon to power up: %d!\n", + x); return x; } msleep(10); /* we'll be conservative */ @@ -150,11 +150,10 @@ power_up: x = dcon_read(dcon, DCON_REG_ID); } if (x < 0) { - printk(KERN_ERR "olpc-dcon: unable to stabilize dcon's " - "smbus, reasserting power and praying.\n"); + printk(KERN_ERR "olpc-dcon: unable to stabilize dcon's smbus, reasserting power and praying.\n"); BUG_ON(olpc_board_at_least(olpc_board(0xc2))); x = 0; - olpc_ec_cmd(0x26, (unsigned char *) &x, 1, NULL, 0); + olpc_ec_cmd(0x26, (unsigned char *)&x, 1, NULL, 0); msleep(100); is_powered_down = 1; goto power_up; /* argh, stupid hardware.. */ @@ -220,10 +219,10 @@ static void dcon_sleep(struct dcon_priv *dcon, bool sleep) if (sleep) { x = 0; - x = olpc_ec_cmd(0x26, (unsigned char *) &x, 1, NULL, 0); + x = olpc_ec_cmd(0x26, (unsigned char *)&x, 1, NULL, 0); if (x) - printk(KERN_WARNING "olpc-dcon: unable to force dcon " - "to power down: %d!\n", x); + printk(KERN_WARNING "olpc-dcon: unable to force dcon to power down: %d!\n", + x); else dcon->asleep = sleep; } else { @@ -232,8 +231,8 @@ static void dcon_sleep(struct dcon_priv *dcon, bool sleep) dcon->disp_mode |= MODE_BL_ENABLE; x = dcon_bus_stabilize(dcon, 1); if (x) - printk(KERN_WARNING "olpc-dcon: unable to reinit dcon" - " hardware: %d!\n", x); + printk(KERN_WARNING "olpc-dcon: unable to reinit dcon hardware: %d!\n", + x); else dcon->asleep = sleep; @@ -304,7 +303,7 @@ static void dcon_source_switch(struct work_struct *work) switch (source) { case DCON_SOURCE_CPU: - printk("dcon_source_switch to CPU\n"); + printk(KERN_INFO "dcon_source_switch to CPU\n"); /* Enable the scanline interrupt bit */ if (dcon_write(dcon, DCON_REG_MODE, dcon->disp_mode | MODE_SCAN_INT)) @@ -599,7 +598,7 @@ static int dcon_fb_notifier(struct notifier_block *self, struct fb_event *evdata = data; struct dcon_priv *dcon = container_of(self, struct dcon_priv, fbevent_nb); - int *blank = (int *) evdata->data; + int *blank = (int *)evdata->data; if (((event != FB_EVENT_BLANK) && (event != FB_EVENT_CONBLANK)) || dcon->ignore_fb_events) return 0; diff --git a/drivers/staging/olpc_dcon/olpc_dcon_xo_1.c b/drivers/staging/olpc_dcon/olpc_dcon_xo_1.c index cb6ce0cf92a..c87fdfac485 100644 --- a/drivers/staging/olpc_dcon/olpc_dcon_xo_1.c +++ b/drivers/staging/olpc_dcon/olpc_dcon_xo_1.c @@ -116,7 +116,7 @@ static int dcon_init_xo_1(struct dcon_priv *dcon) cs5535_gpio_set(OLPC_GPIO_DCON_IRQ, GPIO_NEGATIVE_EDGE_STS); cs5535_gpio_set(OLPC_GPIO_DCON_BLANK, GPIO_NEGATIVE_EDGE_STS); - /* FIXME: Clear the posiitive status as well, just to be sure */ + /* FIXME: Clear the positive status as well, just to be sure */ cs5535_gpio_set(OLPC_GPIO_DCON_IRQ, GPIO_POSITIVE_EDGE_STS); cs5535_gpio_set(OLPC_GPIO_DCON_BLANK, GPIO_POSITIVE_EDGE_STS); diff --git a/drivers/staging/omapdrm/Makefile b/drivers/staging/omapdrm/Makefile index d9cdc120d12..1ca0e0016de 100644 --- a/drivers/staging/omapdrm/Makefile +++ b/drivers/staging/omapdrm/Makefile @@ -13,6 +13,7 @@ omapdrm-y := omap_drv.o \ omap_fb.o \ omap_fbdev.o \ omap_gem.o \ + omap_gem_dmabuf.o \ omap_dmm_tiler.o \ tcm-sita.o diff --git a/drivers/staging/omapdrm/omap_dmm_tiler.c b/drivers/staging/omapdrm/omap_dmm_tiler.c index 1ecb6a73d79..9d83060e753 100644 --- a/drivers/staging/omapdrm/omap_dmm_tiler.c +++ b/drivers/staging/omapdrm/omap_dmm_tiler.c @@ -347,7 +347,7 @@ struct tiler_block *tiler_reserve_2d(enum tiler_fmt fmt, uint16_t w, ret = tcm_reserve_2d(containers[fmt], w, h, align, &block->area); if (ret) { kfree(block); - return 0; + return ERR_PTR(-ENOMEM); } /* add to allocation list */ @@ -371,7 +371,7 @@ struct tiler_block *tiler_reserve_1d(size_t size) if (tcm_reserve_1d(containers[TILFMT_PAGE], num_pages, &block->area)) { kfree(block); - return 0; + return ERR_PTR(-ENOMEM); } spin_lock(&omap_dmm->list_lock); diff --git a/drivers/staging/omapdrm/omap_drv.c b/drivers/staging/omapdrm/omap_drv.c index 620b8d54223..1f559f445a3 100644 --- a/drivers/staging/omapdrm/omap_drv.c +++ b/drivers/staging/omapdrm/omap_drv.c @@ -746,7 +746,7 @@ static const struct file_operations omapdriver_fops = { static struct drm_driver omap_drm_driver = { .driver_features = - DRIVER_HAVE_IRQ | DRIVER_MODESET | DRIVER_GEM, + DRIVER_HAVE_IRQ | DRIVER_MODESET | DRIVER_GEM | DRIVER_PRIME, .load = dev_load, .unload = dev_unload, .open = dev_open, @@ -766,6 +766,8 @@ static struct drm_driver omap_drm_driver = { .debugfs_init = omap_debugfs_init, .debugfs_cleanup = omap_debugfs_cleanup, #endif + .prime_handle_to_fd = drm_gem_prime_handle_to_fd, + .gem_prime_export = omap_gem_prime_export, .gem_init_object = omap_gem_init_object, .gem_free_object = omap_gem_free_object, .gem_vm_ops = &omap_gem_vm_ops, diff --git a/drivers/staging/omapdrm/omap_drv.h b/drivers/staging/omapdrm/omap_drv.h index b7e0f077300..3586173590c 100644 --- a/drivers/staging/omapdrm/omap_drv.h +++ b/drivers/staging/omapdrm/omap_drv.h @@ -148,9 +148,16 @@ int omap_gem_roll(struct drm_gem_object *obj, uint32_t roll); int omap_gem_get_paddr(struct drm_gem_object *obj, dma_addr_t *paddr, bool remap); int omap_gem_put_paddr(struct drm_gem_object *obj); +int omap_gem_get_pages(struct drm_gem_object *obj, struct page ***pages, + bool remap); +int omap_gem_put_pages(struct drm_gem_object *obj); +uint32_t omap_gem_flags(struct drm_gem_object *obj); uint64_t omap_gem_mmap_offset(struct drm_gem_object *obj); size_t omap_gem_mmap_size(struct drm_gem_object *obj); +struct dma_buf * omap_gem_prime_export(struct drm_device *dev, + struct drm_gem_object *obj, int flags); + static inline int align_pitch(int pitch, int width, int bpp) { int bytespp = (bpp + 7) / 8; diff --git a/drivers/staging/omapdrm/omap_fb.c b/drivers/staging/omapdrm/omap_fb.c index 04b235b6724..0c53a3c313f 100644 --- a/drivers/staging/omapdrm/omap_fb.c +++ b/drivers/staging/omapdrm/omap_fb.c @@ -167,7 +167,7 @@ void omap_framebuffer_update_scanout(struct drm_framebuffer *fb, int x, int y, } /* Call for unpin 'a' (if not NULL), and pin 'b' (if not NULL). Although - * buffers to unpin are just just pushed to the unpin fifo so that the + * buffers to unpin are just pushed to the unpin fifo so that the * caller can defer unpin until vblank. * * Note if this fails (ie. something went very wrong!), all buffers are diff --git a/drivers/staging/omapdrm/omap_gem.c b/drivers/staging/omapdrm/omap_gem.c index 921f058cc6a..c5ba334ac6b 100644 --- a/drivers/staging/omapdrm/omap_gem.c +++ b/drivers/staging/omapdrm/omap_gem.c @@ -266,6 +266,12 @@ static void omap_gem_detach_pages(struct drm_gem_object *obj) omap_obj->pages = NULL; } +/* get buffer flags */ +uint32_t omap_gem_flags(struct drm_gem_object *obj) +{ + return to_omap_bo(obj)->flags; +} + /** get mmap offset */ static uint64_t mmap_offset(struct drm_gem_object *obj) { @@ -764,9 +770,27 @@ static int get_pages(struct drm_gem_object *obj, struct page ***pages) return 0; } -int omap_gem_get_pages(struct drm_gem_object *obj, struct page ***pages) +/* if !remap, and we don't have pages backing, then fail, rather than + * increasing the pin count (which we don't really do yet anyways, + * because we don't support swapping pages back out). And 'remap' + * might not be quite the right name, but I wanted to keep it working + * similarly to omap_gem_get_paddr(). Note though that mutex is not + * aquired if !remap (because this can be called in atomic ctxt), + * but probably omap_gem_get_paddr() should be changed to work in the + * same way. If !remap, a matching omap_gem_put_pages() call is not + * required (and should not be made). + */ +int omap_gem_get_pages(struct drm_gem_object *obj, struct page ***pages, + bool remap) { int ret; + if (!remap) { + struct omap_gem_object *omap_obj = to_omap_bo(obj); + if (!omap_obj->pages) + return -ENOMEM; + *pages = omap_obj->pages; + return 0; + } mutex_lock(&obj->dev->struct_mutex); ret = get_pages(obj, pages); mutex_unlock(&obj->dev->struct_mutex); diff --git a/drivers/staging/omapdrm/omap_gem_dmabuf.c b/drivers/staging/omapdrm/omap_gem_dmabuf.c new file mode 100644 index 00000000000..2fa39e8496d --- /dev/null +++ b/drivers/staging/omapdrm/omap_gem_dmabuf.c @@ -0,0 +1,150 @@ +/* + * drivers/staging/omapdrm/omap_gem_dmabuf.c + * + * Copyright (C) 2011 Texas Instruments + * Author: Rob Clark <rob.clark@linaro.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "omap_drv.h" + +#include <linux/dma-buf.h> + +static struct sg_table *omap_gem_map_dma_buf( + struct dma_buf_attachment *attachment, + enum dma_data_direction dir) +{ + struct drm_gem_object *obj = attachment->dmabuf->priv; + struct sg_table *sg; + dma_addr_t paddr; + int ret; + + sg = kzalloc(sizeof(*sg), GFP_KERNEL); + if (!sg) + return ERR_PTR(-ENOMEM); + + /* camera, etc, need physically contiguous.. but we need a + * better way to know this.. + */ + ret = omap_gem_get_paddr(obj, &paddr, true); + if (ret) + goto out; + + ret = sg_alloc_table(sg, 1, GFP_KERNEL); + if (ret) + goto out; + + sg_init_table(sg->sgl, 1); + sg_dma_len(sg->sgl) = obj->size; + sg_set_page(sg->sgl, pfn_to_page(PFN_DOWN(paddr)), obj->size, 0); + sg_dma_address(sg->sgl) = paddr; + +out: + if (ret) + return ERR_PTR(ret); + return sg; +} + +static void omap_gem_unmap_dma_buf(struct dma_buf_attachment *attachment, + struct sg_table *sg, enum dma_data_direction dir) +{ + struct drm_gem_object *obj = attachment->dmabuf->priv; + omap_gem_put_paddr(obj); + sg_free_table(sg); + kfree(sg); +} + +static void omap_gem_dmabuf_release(struct dma_buf *buffer) +{ + struct drm_gem_object *obj = buffer->priv; + /* release reference that was taken when dmabuf was exported + * in omap_gem_prime_set().. + */ + drm_gem_object_unreference_unlocked(obj); +} + + +static int omap_gem_dmabuf_begin_cpu_access(struct dma_buf *buffer, + size_t start, size_t len, enum dma_data_direction dir) +{ + struct drm_gem_object *obj = buffer->priv; + struct page **pages; + if (omap_gem_flags(obj) & OMAP_BO_TILED) { + /* TODO we would need to pin at least part of the buffer to + * get de-tiled view. For now just reject it. + */ + return -ENOMEM; + } + /* make sure we have the pages: */ + return omap_gem_get_pages(obj, &pages, true); +} + +static void omap_gem_dmabuf_end_cpu_access(struct dma_buf *buffer, + size_t start, size_t len, enum dma_data_direction dir) +{ + struct drm_gem_object *obj = buffer->priv; + omap_gem_put_pages(obj); +} + + +static void *omap_gem_dmabuf_kmap_atomic(struct dma_buf *buffer, + unsigned long page_num) +{ + struct drm_gem_object *obj = buffer->priv; + struct page **pages; + omap_gem_get_pages(obj, &pages, false); + return kmap_atomic(pages[page_num]); +} + +static void omap_gem_dmabuf_kunmap_atomic(struct dma_buf *buffer, + unsigned long page_num, void *addr) +{ + kunmap_atomic(addr); +} + +static void *omap_gem_dmabuf_kmap(struct dma_buf *buffer, + unsigned long page_num) +{ + struct drm_gem_object *obj = buffer->priv; + struct page **pages; + omap_gem_get_pages(obj, &pages, false); + return kmap(pages[page_num]); +} + +static void omap_gem_dmabuf_kunmap(struct dma_buf *buffer, + unsigned long page_num, void *addr) +{ + struct drm_gem_object *obj = buffer->priv; + struct page **pages; + omap_gem_get_pages(obj, &pages, false); + kunmap(pages[page_num]); +} + +struct dma_buf_ops omap_dmabuf_ops = { + .map_dma_buf = omap_gem_map_dma_buf, + .unmap_dma_buf = omap_gem_unmap_dma_buf, + .release = omap_gem_dmabuf_release, + .begin_cpu_access = omap_gem_dmabuf_begin_cpu_access, + .end_cpu_access = omap_gem_dmabuf_end_cpu_access, + .kmap_atomic = omap_gem_dmabuf_kmap_atomic, + .kunmap_atomic = omap_gem_dmabuf_kunmap_atomic, + .kmap = omap_gem_dmabuf_kmap, + .kunmap = omap_gem_dmabuf_kunmap, +}; + +struct dma_buf * omap_gem_prime_export(struct drm_device *dev, + struct drm_gem_object *obj, int flags) +{ + return dma_buf_export(obj, &omap_dmabuf_ops, obj->size, 0600); +} diff --git a/drivers/staging/omapdrm/tcm-sita.c b/drivers/staging/omapdrm/tcm-sita.c index 10d5ac3dae4..efb60951054 100644 --- a/drivers/staging/omapdrm/tcm-sita.c +++ b/drivers/staging/omapdrm/tcm-sita.c @@ -200,7 +200,7 @@ static s32 sita_reserve_1d(struct tcm *tcm, u32 num_slots, * * @param w width * @param h height - * @param area pointer to the area that will be populated with the reesrved + * @param area pointer to the area that will be populated with the reserved * area * * @return 0 on success, non-0 error value on failure. diff --git a/drivers/staging/ozwpan/README b/drivers/staging/ozwpan/README index bb1a69b9454..7c055ec9954 100644 --- a/drivers/staging/ozwpan/README +++ b/drivers/staging/ozwpan/README @@ -9,7 +9,7 @@ technology. To operate the driver must be bound to a suitable network interface. This can be done when the module is loaded (specifying the name of the network interface -as a paramter - e.g. 'insmod ozwpan g_net_dev=go0') or can be bound after +as a parameter - e.g. 'insmod ozwpan g_net_dev=go0') or can be bound after loading using an ioctl call. See the ozappif.h file and the ioctls OZ_IOCTL_ADD_BINDING and OZ_IOCTL_REMOVE_BINDING. diff --git a/drivers/staging/ozwpan/ozappif.h b/drivers/staging/ozwpan/ozappif.h index af027329387..1b59b0748c6 100644 --- a/drivers/staging/ozwpan/ozappif.h +++ b/drivers/staging/ozwpan/ozappif.h @@ -11,13 +11,13 @@ #define OZ_IOCTL_MAGIC 0xf4 struct oz_mac_addr { - unsigned char a[6]; + __u8 a[6]; }; #define OZ_MAX_PDS 8 struct oz_pd_list { - int count; + __u32 count; struct oz_mac_addr addr[OZ_MAX_PDS]; }; @@ -27,18 +27,10 @@ struct oz_binding_info { char name[OZ_MAX_BINDING_LEN]; }; -struct oz_test { - int action; -}; - #define OZ_IOCTL_GET_PD_LIST _IOR(OZ_IOCTL_MAGIC, 0, struct oz_pd_list) #define OZ_IOCTL_SET_ACTIVE_PD _IOW(OZ_IOCTL_MAGIC, 1, struct oz_mac_addr) #define OZ_IOCTL_GET_ACTIVE_PD _IOR(OZ_IOCTL_MAGIC, 2, struct oz_mac_addr) -#define OZ_IOCTL_CLEAR_EVENTS _IO(OZ_IOCTL_MAGIC, 3) -#define OZ_IOCTL_GET_EVENTS _IOR(OZ_IOCTL_MAGIC, 4, struct oz_evtlist) #define OZ_IOCTL_ADD_BINDING _IOW(OZ_IOCTL_MAGIC, 5, struct oz_binding_info) -#define OZ_IOCTL_TEST _IOWR(OZ_IOCTL_MAGIC, 6, struct oz_test) -#define OZ_IOCTL_SET_EVENT_MASK _IOW(OZ_IOCTL_MAGIC, 7, unsigned long) #define OZ_IOCTL_REMOVE_BINDING _IOW(OZ_IOCTL_MAGIC, 8, struct oz_binding_info) #define OZ_IOCTL_MAX 9 diff --git a/drivers/staging/ozwpan/ozcdev.c b/drivers/staging/ozwpan/ozcdev.c index 1c380d68796..27325f74ecd 100644 --- a/drivers/staging/ozwpan/ozcdev.c +++ b/drivers/staging/ozwpan/ozcdev.c @@ -41,9 +41,6 @@ struct oz_serial_ctx { }; /*------------------------------------------------------------------------------ */ -int g_taction; -/*------------------------------------------------------------------------------ - */ static struct oz_cdev g_cdev; /*------------------------------------------------------------------------------ * Context: process and softirq @@ -276,20 +273,6 @@ long oz_cdev_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) return -EFAULT; } break; -#ifdef WANT_EVENT_TRACE - case OZ_IOCTL_CLEAR_EVENTS: - oz_events_clear(); - break; - case OZ_IOCTL_GET_EVENTS: - rc = oz_events_copy((void __user *)arg); - break; - case OZ_IOCTL_SET_EVENT_MASK: - if (copy_from_user(&g_evt_mask, (void __user *)arg, - sizeof(unsigned long))) { - return -EFAULT; - } - break; -#endif /* WANT_EVENT_TRACE */ case OZ_IOCTL_ADD_BINDING: case OZ_IOCTL_REMOVE_BINDING: { struct oz_binding_info b; diff --git a/drivers/staging/ozwpan/ozevent.c b/drivers/staging/ozwpan/ozevent.c index 73703d3e96b..7f66b4f19b0 100644 --- a/drivers/staging/ozwpan/ozevent.c +++ b/drivers/staging/ozwpan/ozevent.c @@ -5,29 +5,46 @@ */ #include "ozconfig.h" #ifdef WANT_EVENT_TRACE +#include <linux/module.h> +#include <linux/debugfs.h> #include <linux/jiffies.h> #include <linux/uaccess.h> #include "oztrace.h" #include "ozevent.h" +#include "ozappif.h" /*------------------------------------------------------------------------------ + * Although the event mask is logically part of the oz_evtdev structure, it is + * needed outside of this file so define it seperately to avoid the need to + * export definition of struct oz_evtdev. */ -unsigned long g_evt_mask = 0xffffffff; +u32 g_evt_mask; /*------------------------------------------------------------------------------ */ #define OZ_MAX_EVTS 2048 /* Must be power of 2 */ -DEFINE_SPINLOCK(g_eventlock); -static int g_evt_in; -static int g_evt_out; -static int g_missed_events; -static struct oz_event g_events[OZ_MAX_EVTS]; +struct oz_evtdev { + struct dentry *root_dir; + int evt_in; + int evt_out; + int missed_events; + int present; + atomic_t users; + spinlock_t lock; + struct oz_event evts[OZ_MAX_EVTS]; +}; + +static struct oz_evtdev g_evtdev; + /*------------------------------------------------------------------------------ * Context: process */ void oz_event_init(void) { + /* Because g_evtdev is static external all fields initally zero so no + * need to reinitialised those. + */ oz_trace("Event tracing initialized\n"); - g_evt_in = g_evt_out = 0; - g_missed_events = 0; + spin_lock_init(&g_evtdev.lock); + atomic_set(&g_evtdev.users, 0); } /*------------------------------------------------------------------------------ * Context: process @@ -43,74 +60,136 @@ void oz_event_log2(u8 evt, u8 ctx1, u16 ctx2, void *ctx3, unsigned ctx4) { unsigned long irqstate; int ix; - spin_lock_irqsave(&g_eventlock, irqstate); - ix = (g_evt_in + 1) & (OZ_MAX_EVTS - 1); - if (ix != g_evt_out) { - struct oz_event *e = &g_events[g_evt_in]; + spin_lock_irqsave(&g_evtdev.lock, irqstate); + ix = (g_evtdev.evt_in + 1) & (OZ_MAX_EVTS - 1); + if (ix != g_evtdev.evt_out) { + struct oz_event *e = &g_evtdev.evts[g_evtdev.evt_in]; e->jiffies = jiffies; e->evt = evt; e->ctx1 = ctx1; e->ctx2 = ctx2; - e->ctx3 = ctx3; + e->ctx3 = (__u32)(unsigned long)ctx3; e->ctx4 = ctx4; - g_evt_in = ix; + g_evtdev.evt_in = ix; } else { - g_missed_events++; + g_evtdev.missed_events++; } - spin_unlock_irqrestore(&g_eventlock, irqstate); + spin_unlock_irqrestore(&g_evtdev.lock, irqstate); } /*------------------------------------------------------------------------------ * Context: process */ -int oz_events_copy(struct oz_evtlist __user *lst) +static void oz_events_clear(struct oz_evtdev *dev) { - int first; - int ix; - struct hdr { - int count; - int missed; - } hdr; - ix = g_evt_out; - hdr.count = g_evt_in - ix; - if (hdr.count < 0) - hdr.count += OZ_MAX_EVTS; - if (hdr.count > OZ_EVT_LIST_SZ) - hdr.count = OZ_EVT_LIST_SZ; - hdr.missed = g_missed_events; - g_missed_events = 0; - if (copy_to_user((void __user *)lst, &hdr, sizeof(hdr))) - return -EFAULT; - first = OZ_MAX_EVTS - ix; - if (first > hdr.count) - first = hdr.count; - if (first) { - int sz = first*sizeof(struct oz_event); - void __user *p = (void __user *)lst->evts; - if (copy_to_user(p, &g_events[ix], sz)) - return -EFAULT; - if (hdr.count > first) { - p = (void __user *)&lst->evts[first]; - sz = (hdr.count-first)*sizeof(struct oz_event); - if (copy_to_user(p, g_events, sz)) - return -EFAULT; - } + unsigned long irqstate; + oz_trace("Clearing events\n"); + spin_lock_irqsave(&dev->lock, irqstate); + dev->evt_in = dev->evt_out = 0; + dev->missed_events = 0; + spin_unlock_irqrestore(&dev->lock, irqstate); +} +#ifdef CONFIG_DEBUG_FS +/*------------------------------------------------------------------------------ + * Context: process + */ +int oz_events_open(struct inode *inode, struct file *filp) +{ + oz_trace("oz_evt_open()\n"); + oz_trace("Open flags: 0x%x\n", filp->f_flags); + if (atomic_add_return(1, &g_evtdev.users) == 1) { + oz_events_clear(&g_evtdev); + return nonseekable_open(inode, filp); + } else { + atomic_dec(&g_evtdev.users); + return -EBUSY; } - ix += hdr.count; - if (ix >= OZ_MAX_EVTS) - ix -= OZ_MAX_EVTS; - g_evt_out = ix; +} +/*------------------------------------------------------------------------------ + * Context: process + */ +int oz_events_release(struct inode *inode, struct file *filp) +{ + oz_events_clear(&g_evtdev); + atomic_dec(&g_evtdev.users); + g_evt_mask = 0; + oz_trace("oz_evt_release()\n"); return 0; } /*------------------------------------------------------------------------------ * Context: process */ -void oz_events_clear(void) +ssize_t oz_events_read(struct file *filp, char __user *buf, size_t count, + loff_t *fpos) { - unsigned long irqstate; - spin_lock_irqsave(&g_eventlock, irqstate); - g_evt_in = g_evt_out = 0; - g_missed_events = 0; - spin_unlock_irqrestore(&g_eventlock, irqstate); + struct oz_evtdev *dev = &g_evtdev; + int rc = 0; + int nb_evts = count / sizeof(struct oz_event); + int n; + int sz; + + n = dev->evt_in - dev->evt_out; + if (n < 0) + n += OZ_MAX_EVTS; + if (nb_evts > n) + nb_evts = n; + if (nb_evts == 0) + goto out; + n = OZ_MAX_EVTS - dev->evt_out; + if (n > nb_evts) + n = nb_evts; + sz = n * sizeof(struct oz_event); + if (copy_to_user(buf, &dev->evts[dev->evt_out], sz)) { + rc = -EFAULT; + goto out; + } + if (n == nb_evts) + goto out2; + n = nb_evts - n; + if (copy_to_user(buf + sz, dev->evts, n * sizeof(struct oz_event))) { + rc = -EFAULT; + goto out; + } +out2: + dev->evt_out = (dev->evt_out + nb_evts) & (OZ_MAX_EVTS - 1); + rc = nb_evts * sizeof(struct oz_event); +out: + return rc; } -#endif /* WANT_EVENT_TRACE */ +/*------------------------------------------------------------------------------ + */ +const struct file_operations oz_events_fops = { + .owner = THIS_MODULE, + .open = oz_events_open, + .release = oz_events_release, + .read = oz_events_read, +}; +/*------------------------------------------------------------------------------ + * Context: process + */ +void oz_debugfs_init(void) +{ + struct dentry *parent; + parent = debugfs_create_dir("ozwpan", NULL); + if (parent == NULL) { + oz_trace("Failed to create debugfs directory ozmo\n"); + return; + } else { + g_evtdev.root_dir = parent; + if (debugfs_create_file("events", S_IRUSR, parent, NULL, + &oz_events_fops) == NULL) + oz_trace("Failed to create file ozmo/events\n"); + if (debugfs_create_x32("event_mask", S_IRUSR | S_IWUSR, parent, + &g_evt_mask) == NULL) + oz_trace("Failed to create file ozmo/event_mask\n"); + } +} +/*------------------------------------------------------------------------------ + * Context: process + */ +void oz_debugfs_remove(void) +{ + debugfs_remove_recursive(g_evtdev.root_dir); +} +#endif /* CONFIG_DEBUG_FS */ +#endif /* WANT_EVENT_TRACE */ diff --git a/drivers/staging/ozwpan/ozevent.h b/drivers/staging/ozwpan/ozevent.h index f033d014c6f..32f6f9859c4 100644 --- a/drivers/staging/ozwpan/ozevent.h +++ b/drivers/staging/ozwpan/ozevent.h @@ -9,23 +9,24 @@ #include "ozeventdef.h" #ifdef WANT_EVENT_TRACE -extern unsigned long g_evt_mask; +extern u32 g_evt_mask; void oz_event_init(void); void oz_event_term(void); void oz_event_log2(u8 evt, u8 ctx1, u16 ctx2, void *ctx3, unsigned ctx4); +void oz_debugfs_init(void); +void oz_debugfs_remove(void); #define oz_event_log(__evt, __ctx1, __ctx2, __ctx3, __ctx4) \ do { \ if ((1<<(__evt)) & g_evt_mask) \ oz_event_log2(__evt, __ctx1, __ctx2, __ctx3, __ctx4); \ } while (0) -int oz_events_copy(struct oz_evtlist __user *lst); -void oz_events_clear(void); + #else #define oz_event_init() #define oz_event_term() #define oz_event_log(__evt, __ctx1, __ctx2, __ctx3, __ctx4) -#define oz_events_copy(__lst) -#define oz_events_clear() +#define oz_debugfs_init() +#define oz_debugfs_remove() #endif /* WANT_EVENT_TRACE */ #endif /* _OZEVENT_H */ diff --git a/drivers/staging/ozwpan/ozeventdef.h b/drivers/staging/ozwpan/ozeventdef.h index a880288bab1..4b938981671 100644 --- a/drivers/staging/ozwpan/ozeventdef.h +++ b/drivers/staging/ozwpan/ozeventdef.h @@ -29,19 +29,12 @@ #define OZ_EVT_DEBUG 20 struct oz_event { - unsigned long jiffies; - unsigned char evt; - unsigned char ctx1; - unsigned short ctx2; - void *ctx3; - unsigned ctx4; -}; - -#define OZ_EVT_LIST_SZ 64 -struct oz_evtlist { - int count; - int missed; - struct oz_event evts[OZ_EVT_LIST_SZ]; + __u32 jiffies; + __u8 evt; + __u8 ctx1; + __u16 ctx2; + __u32 ctx3; + __u32 ctx4; }; #endif /* _OZEVENTDEF_H */ diff --git a/drivers/staging/ozwpan/ozhcd.c b/drivers/staging/ozwpan/ozhcd.c index 750b14eb505..251f07c39a6 100644 --- a/drivers/staging/ozwpan/ozhcd.c +++ b/drivers/staging/ozwpan/ozhcd.c @@ -1416,7 +1416,7 @@ static void oz_process_ep0_urb(struct oz_hcd *ozhcd, struct urb *urb, oz_trace("USB_REQ_SET_CONFIGURATION - req\n"); break; case USB_REQ_GET_CONFIGURATION: - /* We short curcuit this case and reply directly since + /* We short circuit this case and reply directly since * we have the selected configuration number cached. */ oz_event_log(OZ_EVT_CTRL_LOCAL, setup->bRequest, 0, 0, @@ -1432,7 +1432,7 @@ static void oz_process_ep0_urb(struct oz_hcd *ozhcd, struct urb *urb, } break; case USB_REQ_GET_INTERFACE: - /* We short curcuit this case and reply directly since + /* We short circuit this case and reply directly since * we have the selected interface alternative cached. */ oz_event_log(OZ_EVT_CTRL_LOCAL, setup->bRequest, 0, 0, @@ -1463,7 +1463,7 @@ static void oz_process_ep0_urb(struct oz_hcd *ozhcd, struct urb *urb, rc = -ENOMEM; } else { /* Note: we are queuing the request after we have - * submitted it to be tranmitted. If the request were + * submitted it to be transmitted. If the request were * to complete before we queued it then it would not * be found in the queue. It seems impossible for * this to happen but if it did the request would diff --git a/drivers/staging/ozwpan/ozmain.c b/drivers/staging/ozwpan/ozmain.c index aaf2ccc0bcf..7579645d642 100644 --- a/drivers/staging/ozwpan/ozmain.c +++ b/drivers/staging/ozwpan/ozmain.c @@ -33,6 +33,9 @@ static int __init ozwpan_init(void) oz_protocol_init(g_net_dev); oz_app_enable(OZ_APPID_USB, 1); oz_apps_init(); +#ifdef CONFIG_DEBUG_FS + oz_debugfs_init(); +#endif return 0; } /*------------------------------------------------------------------------------ @@ -44,6 +47,9 @@ static void __exit ozwpan_exit(void) oz_apps_term(); oz_cdev_deregister(); oz_event_term(); +#ifdef CONFIG_DEBUG_FS + oz_debugfs_remove(); +#endif } /*------------------------------------------------------------------------------ */ @@ -53,6 +59,6 @@ module_exit(ozwpan_exit); MODULE_AUTHOR("Chris Kelly"); MODULE_DESCRIPTION("Ozmo Devices USB over WiFi hcd driver"); -MODULE_VERSION("1.0.8"); +MODULE_VERSION("1.0.9"); MODULE_LICENSE("GPL"); diff --git a/drivers/staging/ozwpan/ozusbsvc.c b/drivers/staging/ozwpan/ozusbsvc.c index 9e74f960238..8fa7f256ad8 100644 --- a/drivers/staging/ozwpan/ozusbsvc.c +++ b/drivers/staging/ozwpan/ozusbsvc.c @@ -7,7 +7,7 @@ * The implementation of this service is split into two parts the first of which * is protocol independent and the second contains protocol specific details. * This split is to allow alternative protocols to be defined. - * The implemenation of this service uses ozhcd.c to implement a USB HCD. + * The implementation of this service uses ozhcd.c to implement a USB HCD. * ----------------------------------------------------------------------------- */ #include <linux/init.h> diff --git a/drivers/staging/panel/panel.c b/drivers/staging/panel/panel.c index 6183573f112..7365089a33e 100644 --- a/drivers/staging/panel/panel.c +++ b/drivers/staging/panel/panel.c @@ -754,7 +754,7 @@ static void lcd_backlight(int on) if (lcd_bl_pin == PIN_NONE) return; - /* The backlight is activated by seting the AUTOFEED line to +5V */ + /* The backlight is activated by setting the AUTOFEED line to +5V */ spin_lock(&pprt_lock); bits.bl = on; panel_set_bits(); diff --git a/drivers/staging/quatech_usb2/quatech_usb2.c b/drivers/staging/quatech_usb2/quatech_usb2.c index bb977e00cc8..801b50d3bc3 100644 --- a/drivers/staging/quatech_usb2/quatech_usb2.c +++ b/drivers/staging/quatech_usb2/quatech_usb2.c @@ -541,7 +541,7 @@ int qt2_open(struct tty_struct *tty, struct usb_serial_port *port) dbg("port->write_urb == NULL, allocating one"); port->write_urb = usb_alloc_urb(0, GFP_KERNEL); if (!port->write_urb) { - err("Allocating write URB failed"); + dev_err(&port->dev, "Allocating write URB failed\n"); return -ENOMEM; } /* buffer same size as port0 */ @@ -549,7 +549,7 @@ int qt2_open(struct tty_struct *tty, struct usb_serial_port *port) port->bulk_out_buffer = kmalloc(port->bulk_out_size, GFP_KERNEL); if (!port->bulk_out_buffer) { - err("Couldn't allocate bulk_out_buffer"); + dev_err(&port->dev, "Couldn't allocate bulk_out_buffer\n"); return -ENOMEM; } } @@ -732,7 +732,7 @@ static int qt2_write(struct tty_struct *tty, struct usb_serial_port *port, } /* We must fill the first 5 bytes of anything we sent with a transmit - * header which directes the data to the correct port. The maximum + * header which directs the data to the correct port. The maximum * size we can send out in one URB is port->bulk_out_size, which caps * the number of bytes of real data we can send in each write. As the * semantics of write allow us to write less than we were give, we cap diff --git a/drivers/staging/ramster/cluster/tcp.c b/drivers/staging/ramster/cluster/tcp.c index 3af1b2c51b7..3490192f8ca 100644 --- a/drivers/staging/ramster/cluster/tcp.c +++ b/drivers/staging/ramster/cluster/tcp.c @@ -111,7 +111,7 @@ static struct socket *r2net_listen_sock; * r2net_wq. teardown detaches the callbacks before destroying the workqueue. * quorum work is queued as sock containers are shutdown.. stop_listening * tears down all the node's sock containers, preventing future shutdowns - * and queued quroum work, before canceling delayed quorum work and + * and queued quorum work, before canceling delayed quorum work and * destroying the work queue. */ static struct workqueue_struct *r2net_wq; @@ -660,7 +660,7 @@ out: /* * we register callbacks so we can queue work on events before calling - * the original callbacks. our callbacks our careful to test user_data + * the original callbacks. our callbacks are careful to test user_data * to discover when they've reaced with r2net_unregister_callbacks(). */ static void r2net_register_callbacks(struct sock *sk, diff --git a/drivers/staging/ramster/xvmalloc.c b/drivers/staging/ramster/xvmalloc.c index 93ba8e9407a..44ceb0b823a 100644 --- a/drivers/staging/ramster/xvmalloc.c +++ b/drivers/staging/ramster/xvmalloc.c @@ -132,7 +132,7 @@ static u32 find_block(struct xv_pool *pool, u32 size, if (!pool->flbitmap) return 0; - /* Get freelist index correspoding to this size */ + /* Get freelist index corresponding to this size */ slindex = get_index(size); slbitmap = pool->slbitmap[slindex / BITS_PER_LONG]; slbitstart = slindex % BITS_PER_LONG; diff --git a/drivers/staging/ramster/zcache-main.c b/drivers/staging/ramster/zcache-main.c index 68b2e053a0e..c071111f06f 100644 --- a/drivers/staging/ramster/zcache-main.c +++ b/drivers/staging/ramster/zcache-main.c @@ -2095,7 +2095,7 @@ out: /* * Called on a remote persistent tmem_get to attempt to preallocate * local storage for the data contained in the remote persistent page. - * If succesfully preallocated, returns the pampd, marked as remote and + * If successfully preallocated, returns the pampd, marked as remote and * in_transit. Else returns NULL. Note that the appropriate tmem data * structure must be locked. */ diff --git a/drivers/staging/rtl8187se/Makefile b/drivers/staging/rtl8187se/Makefile index 72db504b23b..91d1aa2830c 100644 --- a/drivers/staging/rtl8187se/Makefile +++ b/drivers/staging/rtl8187se/Makefile @@ -10,7 +10,7 @@ ccflags-y += -DHIGH_POWER ccflags-y += -DSW_DIG ccflags-y += -DRATE_ADAPT -#enable it for legacy power save, disable it for leisure power save +#enable it for legacy power save, disable it for leisure power save ccflags-y += -DENABLE_LPS diff --git a/drivers/staging/rtl8187se/ieee80211/dot11d.c b/drivers/staging/rtl8187se/ieee80211/dot11d.c index 309bb8bf287..0e93eb0735a 100644 --- a/drivers/staging/rtl8187se/ieee80211/dot11d.c +++ b/drivers/staging/rtl8187se/ieee80211/dot11d.c @@ -55,7 +55,7 @@ Dot11d_Reset(struct ieee80211_device *ieee) // // Description: -// Update country IE from Beacon or Probe Resopnse +// Update country IE from Beacon or Probe Response // and configure PHY for operation in the regulatory domain. // // TODO: diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211.h b/drivers/staging/rtl8187se/ieee80211/ieee80211.h index 40dd715d9df..b94c48b2930 100644 --- a/drivers/staging/rtl8187se/ieee80211/ieee80211.h +++ b/drivers/staging/rtl8187se/ieee80211/ieee80211.h @@ -834,7 +834,7 @@ enum ieee80211_state { /* the association procedure is sending AUTH request*/ IEEE80211_ASSOCIATING_AUTHENTICATING, - /* the association procedure has successfully authentcated + /* the association procedure has successfully authenticated * and is sending association request */ IEEE80211_ASSOCIATING_AUTHENTICATED, @@ -934,7 +934,7 @@ struct ieee80211_device { * with RX of broad/multicast frames */ /* Fragmentation structures */ - // each streaming contain a entry + /* each stream contains an entry */ struct ieee80211_frag_entry frag_cache[17][IEEE80211_FRAG_CACHE_LEN]; unsigned int frag_next_idx[17]; u16 fts; /* Fragmentation Threshold */ @@ -972,7 +972,7 @@ struct ieee80211_device { int rate; /* current rate */ int basic_rate; - //FIXME: pleace callback, see if redundant with softmac_features + //FIXME: please callback, see if redundant with softmac_features short active_scan; /* this contains flags for selectively enable softmac support */ @@ -1106,7 +1106,7 @@ struct ieee80211_device { /* used instead of hard_start_xmit (not softmac_hard_start_xmit) * if the IEEE_SOFTMAC_TX_QUEUE feature is used to TX data - * frames. I the option IEEE_SOFTMAC_SINGLE_QUEUE is also set + * frames. If the option IEEE_SOFTMAC_SINGLE_QUEUE is also set * then also management frames are sent via this callback. * This function can't sleep. */ @@ -1124,7 +1124,7 @@ struct ieee80211_device { /* ask to the driver to retune the radio . * This function can sleep. the driver should ensure - * the radio has been swithced before return. + * the radio has been switched before return. */ void (*set_chan)(struct net_device *dev,short ch); @@ -1135,7 +1135,7 @@ struct ieee80211_device { * The syncro version is similar to the start_scan but * does not return until all channels has been scanned. * this is called in user context and should sleep, - * it is called in a work_queue when swithcing to ad-hoc mode + * it is called in a work_queue when switching to ad-hoc mode * or in behalf of iwlist scan when the card is associated * and root user ask for a scan. * the function stop_scan should stop both the syncro and @@ -1196,7 +1196,7 @@ struct ieee80211_device { /* Generate probe requests */ #define IEEE_SOFTMAC_PROBERQ (1<<4) -/* Generate respones to probe requests */ +/* Generate response to probe requests */ #define IEEE_SOFTMAC_PROBERS (1<<5) /* The ieee802.11 stack will manages the netif queue diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c index 26bacb96d24..8173240dcf7 100644 --- a/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c +++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c @@ -42,7 +42,7 @@ short ieee80211_is_shortslot(const struct ieee80211_network *net) return net->capability & WLAN_CAPABILITY_SHORT_SLOT; } -/* returns the total length needed for pleacing the RATE MFIE +/* returns the total length needed for placing the RATE MFIE * tag and the EXTENDED RATE MFIE tag if needed. * It encludes two bytes per tag for the tag itself and its len */ @@ -60,7 +60,7 @@ unsigned int ieee80211_MFIE_rate_len(struct ieee80211_device *ieee) return rate_len; } -/* pleace the MFIE rate, tag to the memory (double) poined. +/* place the MFIE rate, tag to the memory (double) poised. * Then it updates the pointer so that * it points after the new MFIE tag added. */ @@ -467,7 +467,7 @@ void ieee80211_softmac_scan_syncro(struct ieee80211_device *ieee) * So we switch to IEEE80211_LINKED_SCANNING to remember * that we are still logically linked (not interested in * new network events, despite for updating the net list, - * but we are temporarly 'unlinked' as the driver shall + * but we are temporarily 'unlinked' as the driver shall * not filter RX frames and the channel is changing. * So the only situation in witch are interested is to check * if the state become LINKED because of the #1 situation @@ -530,7 +530,7 @@ void ieee80211_softmac_ips_scan_syncro(struct ieee80211_device *ieee) * So we switch to IEEE80211_LINKED_SCANNING to remember * that we are still logically linked (not interested in * new network events, despite for updating the net list, - * but we are temporarly 'unlinked' as the driver shall + * but we are temporarily 'unlinked' as the driver shall * not filter RX frames and the channel is changing. * So the only situation in witch are interested is to check * if the state become LINKED because of the #1 situation @@ -1140,7 +1140,7 @@ void ieee80211_associate_abort(struct ieee80211_device *ieee) ieee->associate_seq++; - /* don't scan, and avoid to have the RX path possibily + /* don't scan, and avoid to have the RX path possibly * try again to associate. Even do not react to AUTH or * ASSOC response. Just wait for the retry wq to be scheduled. * Here we will check if there are good nets to associate @@ -1346,14 +1346,14 @@ inline void ieee80211_softmac_new_net(struct ieee80211_device *ieee, struct ieee //printk("apset=%d apmatch=%d ssidset=%d ssidbroad=%d ssidmatch=%d\n",apset,apmatch,ssidset,ssidbroad,ssidmatch); if ( /* if the user set the AP check if match. - * if the network does not broadcast essid we check the user supplyed ANY essid + * if the network does not broadcast essid we check the user supplied ANY essid * if the network does broadcast and the user does not set essid it is OK * if the network does broadcast and the user did set essid chech if essid match */ ( apset && apmatch && ((ssidset && ssidbroad && ssidmatch) || (ssidbroad && !ssidset) || (!ssidbroad && ssidset)) ) || /* if the ap is not set, check that the user set the bssid - * and the network does bradcast and that those two bssid matches + * and the network does broadcast and that those two bssid matches */ (!apset && ssidset && ssidbroad && ssidmatch) ){ @@ -1821,7 +1821,7 @@ ieee80211_rx_frame_softmac(struct ieee80211_device *ieee, struct sk_buff *skb, while (left >= sizeof(struct ieee80211_info_element_hdr)) { if (sizeof(struct ieee80211_info_element_hdr) + info_element->len > left) { - printk(KERN_WARNING "[re]associate reeponse error!"); + printk(KERN_WARNING "[re]associate response error!"); return 1; } switch (info_element->id) { @@ -1905,7 +1905,7 @@ associate_complete: } }else{ ieee->softmac_stats.rx_auth_rs_err++; - IEEE80211_DEBUG_MGMT("Authentication respose status code 0x%x",errcode); + IEEE80211_DEBUG_MGMT("Authentication response status code 0x%x",errcode); ieee80211_associate_abort(ieee); } @@ -2184,15 +2184,15 @@ void ieee80211_start_ibss_wq(struct work_struct *work) if(ieee->state == IEEE80211_NOLINK) ieee->current_network.channel = 10; - /* if not then the state is not linked. Maybe the user swithced to + /* if not then the state is not linked. Maybe the user switched to * ad-hoc mode just after being in monitor mode, or just after * being very few time in managed mode (so the card have had no * time to scan all the chans..) or we have just run up the iface * after setting ad-hoc mode. So we have to give another try.. * Here, in ibss mode, should be safe to do this without extra care - * (in bss mode we had to make sure no-one tryed to associate when + * (in bss mode we had to make sure no-one tried to associate when * we had just checked the ieee->state and we was going to start the - * scan) beacause in ibss mode the ieee80211_new_net function, when + * scan) because in ibss mode the ieee80211_new_net function, when * finds a good net, just set the ieee->state to IEEE80211_LINKED, * so, at worst, we waste a bit of time to initiate an unneeded syncro * scan, that will stop at the first round because it sees the state @@ -2342,7 +2342,7 @@ void ieee80211_associate_retry_wq(struct work_struct *work) goto exit; /* until we do not set the state to IEEE80211_NOLINK * there are no possibility to have someone else trying - * to start an association procdure (we get here with + * to start an association procedure (we get here with * ieee->state = IEEE80211_ASSOCIATING). * When we set the state to IEEE80211_NOLINK it is possible * that the RX path run an attempt to associate, but diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac_wx.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac_wx.c index e46ff2ffa09..5d204906baf 100644 --- a/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac_wx.c +++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac_wx.c @@ -362,7 +362,7 @@ int ieee80211_wx_set_essid(struct ieee80211_device *ieee, ieee80211_stop_protocol(ieee); /* this is just to be sure that the GET wx callback - * has consisten infos. not needed otherwise + * has consistent infos. not needed otherwise */ spin_lock_irqsave(&ieee->lock, flags); diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_tx.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_tx.c index 552115cd760..77bb068d4a5 100644 --- a/drivers/staging/rtl8187se/ieee80211/ieee80211_tx.c +++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_tx.c @@ -328,7 +328,7 @@ int ieee80211_rtl_xmit(struct sk_buff *skb, //printk(KERN_WARNING "upper layer packet!\n"); spin_lock_irqsave(&ieee->lock, flags); - /* If there is no driver handler to take the TXB, dont' bother + /* If there is no driver handler to take the TXB, don't bother * creating it... */ if ((!ieee->hard_start_xmit && !(ieee->softmac_features & IEEE_SOFTMAC_TX_QUEUE))|| ((!ieee->softmac_data_hard_start_xmit && (ieee->softmac_features & IEEE_SOFTMAC_TX_QUEUE)))) { diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_wx.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_wx.c index ca414a915a4..c7917b24425 100644 --- a/drivers/staging/rtl8187se/ieee80211/ieee80211_wx.c +++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_wx.c @@ -363,7 +363,7 @@ int ieee80211_wx_set_encode(struct ieee80211_device *ieee, (*crypt)->priv); sec.flags |= (1 << key); /* This ensures a key will be activated if no key is - * explicitely set */ + * explicitly set */ if (key == sec.active_key) sec.flags |= SEC_ACTIVE_KEY; ieee->tx_keyidx = key;//by wb 080312 diff --git a/drivers/staging/rtl8187se/r8180.h b/drivers/staging/rtl8187se/r8180.h index a2c46ae4a40..2682afbac4f 100644 --- a/drivers/staging/rtl8187se/r8180.h +++ b/drivers/staging/rtl8187se/r8180.h @@ -11,7 +11,7 @@ Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver - We want to tanks the Authors of those projects and the Ndiswrapper + We want to thanks the Authors of those projects and the Ndiswrapper project Authors. */ @@ -514,12 +514,12 @@ typedef struct r8180_priv bool bDefaultAntenna1; u8 SignalStrength; long Stats_SignalStrength; - long LastSignalStrengthInPercent; // In percentange, used for smoothing, e.g. Moving Average. + long LastSignalStrengthInPercent; // In percentage, used for smoothing, e.g. Moving Average. u8 SignalQuality; // in 0-100 index. long Stats_SignalQuality; long RecvSignalPower; // in dBm. long Stats_RecvSignalPower; - u8 LastRxPktAntenna; // +by amy 080312 Antenn which received the lasted packet. 0: Aux, 1:Main. Added by Roger, 2008.01.25. + u8 LastRxPktAntenna; // +by amy 080312 Antenna which received the lasted packet. 0: Aux, 1:Main. Added by Roger, 2008.01.25. u32 AdRxOkCnt; long AdRxSignalStrength; u8 CurrAntennaIndex; // Index to current Antenna (both Tx and Rx). @@ -530,7 +530,7 @@ typedef struct r8180_priv long AdRxSsThreshold; // Signal strength threshold to switch antenna. long AdMaxRxSsThreshold; // Max value of AdRxSsThreshold. bool bAdSwitchedChecking; // TRUE if we shall shall check Rx signal strength for last time switching antenna. - long AdRxSsBeforeSwitched; // Rx signal strength before we swithed antenna. + long AdRxSsBeforeSwitched; // Rx signal strength before we switched antenna. struct timer_list SwAntennaDiversityTimer; //by amy for antenna //{by amy 080312 @@ -553,7 +553,7 @@ typedef struct r8180_priv bool bDigMechanism; // TRUE if DIG is enabled, FALSE ow. bool bRegHighPowerMechanism; // For High Power Mechanism. 061010, by rcnjko. u32 FalseAlarmRegValue; - u8 RegDigOfdmFaUpTh; // Upper threhold of OFDM false alarm, which is used in DIG. + u8 RegDigOfdmFaUpTh; // Upper threshold of OFDM false alarm, which is used in DIG. u8 DIG_NumberFallbackVote; u8 DIG_NumberUpgradeVote; // For HW antenna diversity, added by Roger, 2008.01.30. diff --git a/drivers/staging/rtl8187se/r8180_core.c b/drivers/staging/rtl8187se/r8180_core.c index 4fe52f6b003..a513ec73ea1 100644 --- a/drivers/staging/rtl8187se/r8180_core.c +++ b/drivers/staging/rtl8187se/r8180_core.c @@ -1329,7 +1329,7 @@ u16 N_DBPSOfRate(u16 DataRate) } /* - * For Netgear case, they want good-looking singal strength. + * For Netgear case, they want good-looking signal strength. */ long NetgearSignalStrengthTranslate(long LastSS, long CurrSS) { @@ -1380,7 +1380,7 @@ long TranslateToDbm8185(u8 SignalStrengthIndex) /* * Perform signal smoothing for dynamic mechanism. - * This is different with PerformSignalSmoothing8185 in smoothing fomula. + * This is different with PerformSignalSmoothing8185 in smoothing formula. * No dramatic adjustion is apply because dynamic mechanism need some degree * of correctness. Ported from 8187B. */ @@ -1535,7 +1535,7 @@ void rtl8180_rx(struct net_device *dev) /* HW is probably passing several buggy frames * without FD or LD flag set. * Throw this garbage away to prevent skb - * memory exausting + * memory exhausting */ if (!priv->rx_skb_complete) dev_kfree_skb_any(priv->rx_skb); @@ -1648,14 +1648,14 @@ void rtl8180_rx(struct net_device *dev) priv->Stats_SignalQuality = (long)(priv->Stats_SignalQuality * 5 + (long)priv->SignalQuality + 5) / 6; priv->Stats_RecvSignalPower = (long)(priv->Stats_RecvSignalPower * 5 + priv->RecvSignalPower - 1) / 6; - /* Figure out which antenna that received the lasted packet. */ + /* Figure out which antenna that received the last packet. */ priv->LastRxPktAntenna = Antenna ? 1 : 0; /* 0: aux, 1: main. */ SwAntennaDiversityRxOk8185(dev, priv->SignalStrength); } if (first) { if (!priv->rx_skb_complete) { - /* seems that HW sometimes fails to reiceve and + /* seems that HW sometimes fails to receive and doesn't provide the last descriptor */ dev_kfree_skb_any(priv->rx_skb); priv->stats.rxnolast++; @@ -1672,7 +1672,7 @@ void rtl8180_rx(struct net_device *dev) priv->rx_skb_complete = 0; priv->rx_skb->dev = dev; } else { - /* if we are here we should have already RXed + /* if we are here we should have already RXed * the first frame. * If we get here and the skb is not allocated then * we have just throw out garbage (skb not allocated) @@ -1821,15 +1821,15 @@ rate) { /* * This is a rough attempt to TX a frame * This is called by the ieee 80211 stack to TX management frames. - * If the ring is full packet are dropped (for data frame the queue + * If the ring is full packets are dropped (for data frame the queue * is stopped before this can happen). For this reason it is better * if the descriptors are larger than the largest management frame - * we intend to TX: i'm unsure what the HW does if it will not found + * we intend to TX: i'm unsure what the HW does if it will not find * the last fragment of a frame because it has been dropped... * Since queues for Management and Data frames are different we * might use a different lock than tx_lock (for example mgmt_tx_lock) */ -/* these function may loops if invoked with 0 descriptors or 0 len buffer */ +/* these function may loop if invoked with 0 descriptors or 0 len buffer */ int rtl8180_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) { struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev); @@ -2378,7 +2378,7 @@ void rtl8180_wmm_param_update(struct work_struct *work) u8 u1bAIFS; u32 u4bAcParam; pAcParam = (PAC_PARAM)(&AcParam); - /* Retrive paramters to udpate. */ + /* Retrieve paramters to update. */ u1bAIFS = pAcParam->f.AciAifsn.f.AIFSN * (((mode&IEEE_G) == IEEE_G) ? 9 : 20) + aSifsTime; u4bAcParam = ((((u32)(pAcParam->f.TXOPLimit))<<AC_PARAM_TXOP_LIMIT_OFFSET)| (((u32)(pAcParam->f.Ecw.f.ECWmax))<<AC_PARAM_ECW_MAX_OFFSET)| @@ -2414,7 +2414,7 @@ void rtl8180_wmm_param_update(struct work_struct *work) u8 u1bAIFS; u32 u4bAcParam; - /* Retrive paramters to udpate. */ + /* Retrieve paramters to update. */ eACI = pAcParam->f.AciAifsn.f.ACI; /* Mode G/A: slotTimeTimer = 9; Mode B: 20 */ u1bAIFS = pAcParam->f.AciAifsn.f.AIFSN * (((mode&IEEE_G) == IEEE_G) ? 9 : 20) + aSifsTime; @@ -2700,7 +2700,7 @@ short rtl8180_init(struct net_device *dev) priv->bTxPowerTrack = false; priv->ThermalMeter = 0; priv->FalseAlarmRegValue = 0; - priv->RegDigOfdmFaUpTh = 0xc; /* Upper threhold of OFDM false alarm, which is used in DIG. */ + priv->RegDigOfdmFaUpTh = 0xc; /* Upper threshold of OFDM false alarm, which is used in DIG. */ priv->DIG_NumberFallbackVote = 0; priv->DIG_NumberUpgradeVote = 0; priv->LastSignalStrengthInPercent = 0; @@ -2896,7 +2896,7 @@ short rtl8180_init(struct net_device *dev) priv->chtxpwr_ofdm[i+1] = (word & 0xff00) >> 8; } - /* 3Read crystal calibtration and thermal meter indication on 87SE. */ + /* 3Read crystal calibration and thermal meter indication on 87SE. */ eeprom_93cx6_read(&eeprom, EEPROM_RSV>>1, &tmpu16); /* Crystal calibration for Xin and Xout resp. */ @@ -3140,7 +3140,7 @@ void rtl8180_adapter_start(struct net_device *dev) /* * The following is very strange. seems to be that 1 means test mode, - * but we need to acknolwledges the nic when a packet is ready + * but we need to acknowledges the nic when a packet is ready * although we set it to 0 */ @@ -3971,7 +3971,7 @@ irqreturn_t rtl8180_interrupt(int irq, void *netdev, struct pt_regs *regs) } if (inta == 0xffff) { - /* HW disappared */ + /* HW disappeared */ spin_unlock_irqrestore(&priv->irq_th_lock, flags); return IRQ_HANDLED; } diff --git a/drivers/staging/rtl8187se/r8180_dm.c b/drivers/staging/rtl8187se/r8180_dm.c index 4d7a5951486..b8f2ba010a0 100644 --- a/drivers/staging/rtl8187se/r8180_dm.c +++ b/drivers/staging/rtl8187se/r8180_dm.c @@ -2,7 +2,7 @@ #include "r8180_hw.h" #include "r8180_93cx6.h" - /* Return TRUE if we shall perform High Power Mecahnism, FALSE otherwise. */ + /* Return TRUE if we shall perform High Power Mechanism, FALSE otherwise. */ #define RATE_ADAPTIVE_TIMER_PERIOD 300 bool CheckHighPower(struct net_device *dev) @@ -105,7 +105,7 @@ void rtl8180_tx_pw_wq(struct work_struct *work) /* - * Return TRUE if we shall perform DIG Mecahnism, FALSE otherwise. + * Return TRUE if we shall perform DIG Mechanism, FALSE otherwise. */ bool CheckDig(struct net_device *dev) { @@ -507,7 +507,7 @@ void StaRateAdaptive87SE(struct net_device *dev) * and retry rate. * (3) Remove all Initial Gain Updates over OFDM rate. To avoid the complicated * situation, Initial Gain Update is upon on DIG mechanism except CCK rate. - * (4) Add the mehanism of trying to upgrade tx rate. + * (4) Add the mechanism of trying to upgrade tx rate. * (5) Record the information of upping tx rate to avoid trying upping tx rate constantly. * */ @@ -528,7 +528,7 @@ void StaRateAdaptive87SE(struct net_device *dev) if (priv->bTryuping == true) { /* 2 For Test Upgrading mechanism * Note: - * Sometimes the throughput is upon on the capability bwtween the AP and NIC, + * Sometimes the throughput is upon on the capability between the AP and NIC, * thus the low data rate does not improve the performance. * We randomly upgrade the data rate and check if the retry rate is improved. */ @@ -704,7 +704,7 @@ void StaRateAdaptive87SE(struct net_device *dev) /* * The difference in throughput between 48Mbps and 36Mbps is 8M. - * So, we must be carefully in this rate scale. Isaiah 2008-02-15. + * So, we must be careful in this rate scale. Isaiah 2008-02-15. */ if (((priv->CurrentOperaRate == 72) || (priv->CurrentOperaRate == 48) || (priv->CurrentOperaRate == 36)) && (priv->FailTxRateCount > 2)) @@ -1009,7 +1009,7 @@ void SwAntennaDiversity(struct net_device *dev) if (priv->AdCheckPeriod > priv->AdMaxCheckPeriod) priv->AdCheckPeriod = priv->AdMaxCheckPeriod; - /* Wrong deceision => switch back. */ + /* Wrong decision => switch back. */ SwitchAntenna(dev); } else { /* Rx Signal Strength is improved. */ @@ -1057,7 +1057,7 @@ void SwAntennaDiversity(struct net_device *dev) } /* * <Roger_Notes> We evaluate Rx signal strength ONLY when default antenna - * didn't changed by HW evaluation. + * didn't change by HW evaluation. * 2008.02.27. * * [TRC Dell Lab] SignalStrength is inaccuracy. Isaiah 2008-03-05 @@ -1098,7 +1098,7 @@ void SwAntennaDiversity(struct net_device *dev) priv->AdAuxAntennaRxOkCnt = 0; } - /* Return TRUE if we shall perform Tx Power Tracking Mecahnism, FALSE otherwise. */ + /* Return TRUE if we shall perform Tx Power Tracking Mechanism, FALSE otherwise. */ bool CheckTxPwrTracking(struct net_device *dev) { struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev); diff --git a/drivers/staging/rtl8187se/r8180_rtl8225z2.c b/drivers/staging/rtl8187se/r8180_rtl8225z2.c index ee5b867fd0d..d28c1d99608 100644 --- a/drivers/staging/rtl8187se/r8180_rtl8225z2.c +++ b/drivers/staging/rtl8187se/r8180_rtl8225z2.c @@ -190,7 +190,7 @@ static void rtl8225_SetTXPowerLevel(struct net_device *dev, short ch) write_phy_cck(dev, 0x44 + i, power); } - /* FIXME Is this delay really needeed ? */ + /* FIXME Is this delay really needed ? */ force_pci_posting(dev); mdelay(1); @@ -479,7 +479,7 @@ s8 DbmToTxPwrIdx(struct r8180_priv *priv, WIRELESS_MODE WirelessMode, /* * TRUE if we want to use a default implementation. - * We shall set it to FALSE when we have exact translation formular + * We shall set it to FALSE when we have exact translation formula * for target IC. 070622, by rcnjko. */ if (bUseDefault) { diff --git a/drivers/staging/rtl8187se/r8180_wx.c b/drivers/staging/rtl8187se/r8180_wx.c index 303ec691262..46ee6f47f52 100644 --- a/drivers/staging/rtl8187se/r8180_wx.c +++ b/drivers/staging/rtl8187se/r8180_wx.c @@ -13,7 +13,7 @@ Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver. - We want to tanks the Authors of those projects and the Ndiswrapper + We want to thanks the Authors of those projects and the Ndiswrapper project Authors. */ @@ -1181,7 +1181,7 @@ static iw_handler r8180_wx_handlers[] = { r8180_wx_set_wap, /* SIOCSIWAP */ r8180_wx_get_wap, /* SIOCGIWAP */ r8180_wx_set_mlme, /* SIOCSIWMLME*/ - dummy, /* SIOCGIWAPLIST -- depricated */ + dummy, /* SIOCGIWAPLIST -- deprecated */ r8180_wx_set_scan, /* SIOCSIWSCAN */ r8180_wx_get_scan, /* SIOCGIWSCAN */ r8180_wx_set_essid, /* SIOCSIWESSID */ @@ -1369,7 +1369,7 @@ static inline int is_same_network(struct ieee80211_network *src, (dst->capability & WLAN_CAPABILITY_BSS))); } -/* WB modefied to show signal to GUI on 18-01-2008 */ +/* WB modified to show signal to GUI on 18-01-2008 */ static struct iw_statistics *r8180_get_wireless_stats(struct net_device *dev) { struct r8180_priv *priv = ieee80211_priv(dev); diff --git a/drivers/staging/rtl8187se/r8180_wx.h b/drivers/staging/rtl8187se/r8180_wx.h index 735d03dceed..40819140311 100644 --- a/drivers/staging/rtl8187se/r8180_wx.h +++ b/drivers/staging/rtl8187se/r8180_wx.h @@ -7,7 +7,7 @@ Parts of this driver are based on the rtl8180 driver skeleton from Patric Schenke & Andres Salomon Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver - We want to tanks the Authors of such projects and the Ndiswrapper project Authors. + We want to thanks the Authors of such projects and the Ndiswrapper project Authors. */ /* this file (will) contains wireless extension handlers*/ diff --git a/drivers/staging/rtl8187se/r8185b_init.c b/drivers/staging/rtl8187se/r8185b_init.c index 4b0b830f9ab..914495783c0 100644 --- a/drivers/staging/rtl8187se/r8185b_init.c +++ b/drivers/staging/rtl8187se/r8185b_init.c @@ -1,22 +1,22 @@ -/*++ -Copyright (c) Realtek Semiconductor Corp. All rights reserved. - -Module Name: - r8185b_init.c - -Abstract: - Hardware Initialization and Hardware IO for RTL8185B - -Major Change History: - When Who What - ---------- --------------- ------------------------------- - 2006-11-15 Xiong Created - -Notes: - This file is ported from RTL8185B Windows driver. - - ---*/ +/* + * Copyright (c) Realtek Semiconductor Corp. All rights reserved. + * + * Module Name: + * r8185b_init.c + * + * Abstract: + * Hardware Initialization and Hardware IO for RTL8185B + * + * Major Change History: + * When Who What + * ---------- --------------- ------------------------------- + * 2006-11-15 Xiong Created + * + * Notes: + * This file is ported from RTL8185B Windows driver. + * + * + */ /*--------------------------Include File------------------------------------*/ #include <linux/spinlock.h> @@ -25,155 +25,134 @@ Notes: #include "r8180_rtl8225.h" /* RTL8225 Radio frontend */ #include "r8180_93cx6.h" /* Card EEPROM */ #include "r8180_wx.h" - #include "ieee80211/dot11d.h" - - /* #define CONFIG_RTL8180_IO_MAP */ - #define TC_3W_POLL_MAX_TRY_CNT 5 + static u8 MAC_REG_TABLE[][2] = { - /*PAGA 0: */ - /* 0x34(BRSR), 0xBE(RATE_FALLBACK_CTL), 0x1E0(ARFR) would set in HwConfigureRTL8185() */ - /* 0x272(RFSW_CTRL), 0x1CE(AESMSK_QC) set in InitializeAdapter8185(). */ - /* 0x1F0~0x1F8 set in MacConfig_85BASIC() */ - {0x08, 0xae}, {0x0a, 0x72}, {0x5b, 0x42}, - {0x84, 0x88}, {0x85, 0x24}, {0x88, 0x54}, {0x8b, 0xb8}, {0x8c, 0x03}, - {0x8d, 0x40}, {0x8e, 0x00}, {0x8f, 0x00}, {0x5b, 0x18}, {0x91, 0x03}, - {0x94, 0x0F}, {0x95, 0x32}, - {0x96, 0x00}, {0x97, 0x07}, {0xb4, 0x22}, {0xdb, 0x00}, - {0xf0, 0x32}, {0xf1, 0x32}, {0xf2, 0x00}, {0xf3, 0x00}, {0xf4, 0x32}, - {0xf5, 0x43}, {0xf6, 0x00}, {0xf7, 0x00}, {0xf8, 0x46}, {0xf9, 0xa4}, - {0xfa, 0x00}, {0xfb, 0x00}, {0xfc, 0x96}, {0xfd, 0xa4}, {0xfe, 0x00}, - {0xff, 0x00}, - - /*PAGE 1: */ - /* For Flextronics system Logo PCIHCT failure: */ - /* 0x1C4~0x1CD set no-zero value to avoid PCI configuration space 0x45[7]=1 */ - {0x5e, 0x01}, - {0x58, 0x00}, {0x59, 0x00}, {0x5a, 0x04}, {0x5b, 0x00}, {0x60, 0x24}, - {0x61, 0x97}, {0x62, 0xF0}, {0x63, 0x09}, {0x80, 0x0F}, {0x81, 0xFF}, - {0x82, 0xFF}, {0x83, 0x03}, - {0xC4, 0x22}, {0xC5, 0x22}, {0xC6, 0x22}, {0xC7, 0x22}, {0xC8, 0x22}, /* lzm add 080826 */ - {0xC9, 0x22}, {0xCA, 0x22}, {0xCB, 0x22}, {0xCC, 0x22}, {0xCD, 0x22},/* lzm add 080826 */ - {0xe2, 0x00}, - - - /* PAGE 2: */ - {0x5e, 0x02}, - {0x0c, 0x04}, {0x4c, 0x30}, {0x4d, 0x08}, {0x50, 0x05}, {0x51, 0xf5}, - {0x52, 0x04}, {0x53, 0xa0}, {0x54, 0xff}, {0x55, 0xff}, {0x56, 0xff}, - {0x57, 0xff}, {0x58, 0x08}, {0x59, 0x08}, {0x5a, 0x08}, {0x5b, 0x08}, - {0x60, 0x08}, {0x61, 0x08}, {0x62, 0x08}, {0x63, 0x08}, {0x64, 0x2f}, - {0x8c, 0x3f}, {0x8d, 0x3f}, {0x8e, 0x3f}, - {0x8f, 0x3f}, {0xc4, 0xff}, {0xc5, 0xff}, {0xc6, 0xff}, {0xc7, 0xff}, - {0xc8, 0x00}, {0xc9, 0x00}, {0xca, 0x80}, {0xcb, 0x00}, - - /* PAGA 0: */ - {0x5e, 0x00}, {0x9f, 0x03} - }; - - -static u8 ZEBRA_AGC[] = { - 0, - 0x7E, 0x7E, 0x7E, 0x7E, 0x7D, 0x7C, 0x7B, 0x7A, 0x79, 0x78, 0x77, 0x76, 0x75, 0x74, 0x73, 0x72, - 0x71, 0x70, 0x6F, 0x6E, 0x6D, 0x6C, 0x6B, 0x6A, 0x69, 0x68, 0x67, 0x66, 0x65, 0x64, 0x63, 0x62, - 0x48, 0x47, 0x46, 0x45, 0x44, 0x29, 0x28, 0x27, 0x26, 0x25, 0x24, 0x23, 0x22, 0x21, 0x08, 0x07, - 0x06, 0x05, 0x04, 0x03, 0x02, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x10, 0x11, 0x12, 0x13, 0x15, 0x16, - 0x17, 0x17, 0x18, 0x18, 0x19, 0x1a, 0x1a, 0x1b, 0x1b, 0x1c, 0x1c, 0x1d, 0x1d, 0x1d, 0x1e, 0x1e, - 0x1f, 0x1f, 0x1f, 0x20, 0x20, 0x20, 0x20, 0x21, 0x21, 0x21, 0x22, 0x22, 0x22, 0x23, 0x23, 0x24, - 0x24, 0x25, 0x25, 0x25, 0x26, 0x26, 0x27, 0x27, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F - }; - -static u32 ZEBRA_RF_RX_GAIN_TABLE[] = { - 0x0096, 0x0076, 0x0056, 0x0036, 0x0016, 0x01f6, 0x01d6, 0x01b6, - 0x0196, 0x0176, 0x00F7, 0x00D7, 0x00B7, 0x0097, 0x0077, 0x0057, - 0x0037, 0x00FB, 0x00DB, 0x00BB, 0x00FF, 0x00E3, 0x00C3, 0x00A3, - 0x0083, 0x0063, 0x0043, 0x0023, 0x0003, 0x01E3, 0x01C3, 0x01A3, - 0x0183, 0x0163, 0x0143, 0x0123, 0x0103 + /*PAGA 0: */ + /* 0x34(BRSR), 0xBE(RATE_FALLBACK_CTL), 0x1E0(ARFR) would set in HwConfigureRTL8185() */ + /* 0x272(RFSW_CTRL), 0x1CE(AESMSK_QC) set in InitializeAdapter8185(). */ + /* 0x1F0~0x1F8 set in MacConfig_85BASIC() */ + {0x08, 0xae}, {0x0a, 0x72}, {0x5b, 0x42}, + {0x84, 0x88}, {0x85, 0x24}, {0x88, 0x54}, {0x8b, 0xb8}, {0x8c, 0x03}, + {0x8d, 0x40}, {0x8e, 0x00}, {0x8f, 0x00}, {0x5b, 0x18}, {0x91, 0x03}, + {0x94, 0x0F}, {0x95, 0x32}, + {0x96, 0x00}, {0x97, 0x07}, {0xb4, 0x22}, {0xdb, 0x00}, + {0xf0, 0x32}, {0xf1, 0x32}, {0xf2, 0x00}, {0xf3, 0x00}, {0xf4, 0x32}, + {0xf5, 0x43}, {0xf6, 0x00}, {0xf7, 0x00}, {0xf8, 0x46}, {0xf9, 0xa4}, + {0xfa, 0x00}, {0xfb, 0x00}, {0xfc, 0x96}, {0xfd, 0xa4}, {0xfe, 0x00}, + {0xff, 0x00}, + + /*PAGE 1: */ + /* For Flextronics system Logo PCIHCT failure: */ + /* 0x1C4~0x1CD set no-zero value to avoid PCI configuration space 0x45[7]=1 */ + {0x5e, 0x01}, + {0x58, 0x00}, {0x59, 0x00}, {0x5a, 0x04}, {0x5b, 0x00}, {0x60, 0x24}, + {0x61, 0x97}, {0x62, 0xF0}, {0x63, 0x09}, {0x80, 0x0F}, {0x81, 0xFF}, + {0x82, 0xFF}, {0x83, 0x03}, + {0xC4, 0x22}, {0xC5, 0x22}, {0xC6, 0x22}, {0xC7, 0x22}, {0xC8, 0x22}, /* lzm add 080826 */ + {0xC9, 0x22}, {0xCA, 0x22}, {0xCB, 0x22}, {0xCC, 0x22}, {0xCD, 0x22}, /* lzm add 080826 */ + {0xe2, 0x00}, + + + /* PAGE 2: */ + {0x5e, 0x02}, + {0x0c, 0x04}, {0x4c, 0x30}, {0x4d, 0x08}, {0x50, 0x05}, {0x51, 0xf5}, + {0x52, 0x04}, {0x53, 0xa0}, {0x54, 0xff}, {0x55, 0xff}, {0x56, 0xff}, + {0x57, 0xff}, {0x58, 0x08}, {0x59, 0x08}, {0x5a, 0x08}, {0x5b, 0x08}, + {0x60, 0x08}, {0x61, 0x08}, {0x62, 0x08}, {0x63, 0x08}, {0x64, 0x2f}, + {0x8c, 0x3f}, {0x8d, 0x3f}, {0x8e, 0x3f}, + {0x8f, 0x3f}, {0xc4, 0xff}, {0xc5, 0xff}, {0xc6, 0xff}, {0xc7, 0xff}, + {0xc8, 0x00}, {0xc9, 0x00}, {0xca, 0x80}, {0xcb, 0x00}, + + /* PAGA 0: */ + {0x5e, 0x00}, {0x9f, 0x03} + }; + + +static u8 ZEBRA_AGC[] = { + 0, + 0x7E, 0x7E, 0x7E, 0x7E, 0x7D, 0x7C, 0x7B, 0x7A, 0x79, 0x78, 0x77, 0x76, 0x75, 0x74, 0x73, 0x72, + 0x71, 0x70, 0x6F, 0x6E, 0x6D, 0x6C, 0x6B, 0x6A, 0x69, 0x68, 0x67, 0x66, 0x65, 0x64, 0x63, 0x62, + 0x48, 0x47, 0x46, 0x45, 0x44, 0x29, 0x28, 0x27, 0x26, 0x25, 0x24, 0x23, 0x22, 0x21, 0x08, 0x07, + 0x06, 0x05, 0x04, 0x03, 0x02, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x10, 0x11, 0x12, 0x13, 0x15, 0x16, + 0x17, 0x17, 0x18, 0x18, 0x19, 0x1a, 0x1a, 0x1b, 0x1b, 0x1c, 0x1c, 0x1d, 0x1d, 0x1d, 0x1e, 0x1e, + 0x1f, 0x1f, 0x1f, 0x20, 0x20, 0x20, 0x20, 0x21, 0x21, 0x21, 0x22, 0x22, 0x22, 0x23, 0x23, 0x24, + 0x24, 0x25, 0x25, 0x25, 0x26, 0x26, 0x27, 0x27, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F + }; + +static u32 ZEBRA_RF_RX_GAIN_TABLE[] = { + 0x0096, 0x0076, 0x0056, 0x0036, 0x0016, 0x01f6, 0x01d6, 0x01b6, + 0x0196, 0x0176, 0x00F7, 0x00D7, 0x00B7, 0x0097, 0x0077, 0x0057, + 0x0037, 0x00FB, 0x00DB, 0x00BB, 0x00FF, 0x00E3, 0x00C3, 0x00A3, + 0x0083, 0x0063, 0x0043, 0x0023, 0x0003, 0x01E3, 0x01C3, 0x01A3, + 0x0183, 0x0163, 0x0143, 0x0123, 0x0103 }; -static u8 OFDM_CONFIG[] = { - /* OFDM reg0x06[7:0]=0xFF: Enable power saving mode in RX */ - /* OFDM reg0x3C[4]=1'b1: Enable RX power saving mode */ - /* ofdm 0x3a = 0x7b ,(original : 0xfb) For ECS shielding room TP test */ - - /* 0x00 */ - 0x10, 0x0F, 0x0A, 0x0C, 0x14, 0xFA, 0xFF, 0x50, - 0x00, 0x50, 0x00, 0x00, 0x00, 0x5C, 0x00, 0x00, - /* 0x10 */ - 0x40, 0x00, 0x40, 0x00, 0x00, 0x00, 0xA8, 0x26, - 0x32, 0x33, 0x06, 0xA5, 0x6F, 0x55, 0xC8, 0xBB, - /* 0x20 */ - 0x0A, 0xE1, 0x2C, 0x4A, 0x86, 0x83, 0x34, 0x00, - 0x4F, 0x24, 0x6F, 0xC2, 0x03, 0x40, 0x80, 0x00, - /* 0x30 */ - 0xC0, 0xC1, 0x58, 0xF1, 0x00, 0xC4, 0x90, 0x3e, - 0xD8, 0x3C, 0x7B, 0x10, 0x10 - }; - -/* --------------------------------------------------------------- - * Hardware IO - * the code is ported from Windows source code - ----------------------------------------------------------------*/ - -void -PlatformIOWrite1Byte( - struct net_device *dev, - u32 offset, - u8 data - ) +static u8 OFDM_CONFIG[] = { + /* OFDM reg0x06[7:0]=0xFF: Enable power saving mode in RX */ + /* OFDM reg0x3C[4]=1'b1: Enable RX power saving mode */ + /* ofdm 0x3a = 0x7b ,(original : 0xfb) For ECS shielding room TP test */ + /* 0x00 */ + 0x10, 0x0F, 0x0A, 0x0C, 0x14, 0xFA, 0xFF, 0x50, + 0x00, 0x50, 0x00, 0x00, 0x00, 0x5C, 0x00, 0x00, + /* 0x10 */ + 0x40, 0x00, 0x40, 0x00, 0x00, 0x00, 0xA8, 0x26, + 0x32, 0x33, 0x06, 0xA5, 0x6F, 0x55, 0xC8, 0xBB, + /* 0x20 */ + 0x0A, 0xE1, 0x2C, 0x4A, 0x86, 0x83, 0x34, 0x00, + 0x4F, 0x24, 0x6F, 0xC2, 0x03, 0x40, 0x80, 0x00, + /* 0x30 */ + 0xC0, 0xC1, 0x58, 0xF1, 0x00, 0xC4, 0x90, 0x3e, + 0xD8, 0x3C, 0x7B, 0x10, 0x10 + }; + + /*--------------------------------------------------------------- + * Hardware IO + * the code is ported from Windows source code + *--------------------------------------------------------------- + */ + +void PlatformIOWrite1Byte(struct net_device *dev, u32 offset, u8 data) { write_nic_byte(dev, offset, data); - read_nic_byte(dev, offset); /* To make sure write operation is completed, 2005.11.09, by rcnjko. */ - + read_nic_byte(dev, offset); /* To make sure write operation is completed, 2005.11.09, by rcnjko. */ } -void -PlatformIOWrite2Byte( - struct net_device *dev, - u32 offset, - u16 data - ) +void PlatformIOWrite2Byte(struct net_device *dev, u32 offset, u16 data) { write_nic_word(dev, offset, data); read_nic_word(dev, offset); /* To make sure write operation is completed, 2005.11.09, by rcnjko. */ - - } + u8 PlatformIORead1Byte(struct net_device *dev, u32 offset); -void -PlatformIOWrite4Byte( - struct net_device *dev, - u32 offset, - u32 data - ) +void PlatformIOWrite4Byte(struct net_device *dev, u32 offset, u32 data) { -/* {by amy 080312 */ -if (offset == PhyAddr) { -/* For Base Band configuration. */ + if (offset == PhyAddr) { + /* For Base Band configuration. */ unsigned char cmdByte; unsigned long dataBytes; unsigned char idx; - u8 u1bTmp; + u8 u1bTmp; cmdByte = (u8)(data & 0x000000ff); dataBytes = data>>8; /* - 071010, rcnjko: - The critical section is only BB read/write race condition. - Assumption: - 1. We assume NO one will access BB at DIRQL, otherwise, system will crash for - acquiring the spinlock in such context. - 2. PlatformIOWrite4Byte() MUST NOT be recursive. - */ -/* NdisAcquireSpinLock( &(pDevice->IoSpinLock) ); */ - - for (idx = 0; idx < 30; idx++) { - /* Make sure command bit is clear before access it. */ + * 071010, rcnjko: + * The critical section is only BB read/write race condition. + * Assumption: + * 1. We assume NO one will access BB at DIRQL, otherwise, system will crash for + * acquiring the spinlock in such context. + * 2. PlatformIOWrite4Byte() MUST NOT be recursive. + */ + /* NdisAcquireSpinLock( &(pDevice->IoSpinLock) ); */ + + for (idx = 0; idx < 30; idx++) { + /* Make sure command bit is clear before access it. */ u1bTmp = PlatformIORead1Byte(dev, PhyAddr); if ((u1bTmp & BIT7) == 0) break; @@ -186,20 +165,14 @@ if (offset == PhyAddr) { write_nic_byte(dev, offset, cmdByte); -/* NdisReleaseSpinLock( &(pDevice->IoSpinLock) ); */ - } -/* by amy 080312} */ - else { + /* NdisReleaseSpinLock( &(pDevice->IoSpinLock) ); */ + } else { write_nic_dword(dev, offset, data); read_nic_dword(dev, offset); /* To make sure write operation is completed, 2005.11.09, by rcnjko. */ } } -u8 -PlatformIORead1Byte( - struct net_device *dev, - u32 offset - ) +u8 PlatformIORead1Byte(struct net_device *dev, u32 offset) { u8 data = 0; @@ -209,11 +182,7 @@ PlatformIORead1Byte( return data; } -u16 -PlatformIORead2Byte( - struct net_device *dev, - u32 offset - ) +u16 PlatformIORead2Byte(struct net_device *dev, u32 offset) { u16 data = 0; @@ -223,11 +192,7 @@ PlatformIORead2Byte( return data; } -u32 -PlatformIORead4Byte( - struct net_device *dev, - u32 offset - ) +u32 PlatformIORead4Byte(struct net_device *dev, u32 offset) { u32 data = 0; @@ -242,22 +207,19 @@ void SetOutputEnableOfRfPins(struct net_device *dev) write_nic_word(dev, RFPinsEnable, 0x1bff); } -static int -HwHSSIThreeWire( - struct net_device *dev, - u8 *pDataBuf, - u8 nDataBufBitCnt, - int bSI, - int bWrite - ) +static int HwHSSIThreeWire(struct net_device *dev, + u8 *pDataBuf, + u8 nDataBufBitCnt, + int bSI, + int bWrite) { int bResult = 1; u8 TryCnt; u8 u1bTmp; - do { + do { /* Check if WE and RE are cleared. */ - for (TryCnt = 0; TryCnt < TC_3W_POLL_MAX_TRY_CNT; TryCnt++) { + for (TryCnt = 0; TryCnt < TC_3W_POLL_MAX_TRY_CNT; TryCnt++) { u1bTmp = read_nic_byte(dev, SW_3W_CMD1); if ((u1bTmp & (SW_3W_CMD1_RE|SW_3W_CMD1_WE)) == 0) break; @@ -275,15 +237,15 @@ HwHSSIThreeWire( u1bTmp = read_nic_byte(dev, RF_SW_CONFIG); if (bSI) - u1bTmp |= RF_SW_CFG_SI; /* reg08[1]=1 Serial Interface(SI) */ + u1bTmp |= RF_SW_CFG_SI; /* reg08[1]=1 Serial Interface(SI) */ else - u1bTmp &= ~RF_SW_CFG_SI; /* reg08[1]=0 Parallel Interface(PI) */ + u1bTmp &= ~RF_SW_CFG_SI; /* reg08[1]=0 Parallel Interface(PI) */ write_nic_byte(dev, RF_SW_CONFIG, u1bTmp); - if (bSI) { + if (bSI) { /* jong: HW SI read must set reg84[3]=0. */ u1bTmp = read_nic_byte(dev, RFPinsSelect); u1bTmp &= ~BIT3; @@ -291,14 +253,14 @@ HwHSSIThreeWire( } /* Fill up data buffer for write operation. */ - if (bWrite) { - if (nDataBufBitCnt == 16) { + if (bWrite) { + if (nDataBufBitCnt == 16) { write_nic_word(dev, SW_3W_DB0, *((u16 *)pDataBuf)); - } else if (nDataBufBitCnt == 64) { + } else if (nDataBufBitCnt == 64) { /* RTL8187S shouldn't enter this case */ write_nic_dword(dev, SW_3W_DB0, *((u32 *)pDataBuf)); write_nic_dword(dev, SW_3W_DB1, *((u32 *)(pDataBuf + 4))); - } else { + } else { int idx; int ByteCnt = nDataBufBitCnt / 8; /* printk("%d\n",nDataBufBitCnt); */ @@ -324,11 +286,11 @@ HwHSSIThreeWire( write_nic_byte(dev, (SW_3W_DB0+idx), *(pDataBuf+idx)); } - } else { /* read */ - if (bSI) { - /* SI - reg274[3:0] : RF register's Address */ + } else { /* read */ + if (bSI) { + /* SI - reg274[3:0] : RF register's Address */ write_nic_word(dev, SW_3W_DB0, *((u16 *)pDataBuf)); - } else { + } else { /* PI - reg274[15:12] : RF register's Address */ write_nic_word(dev, SW_3W_DB0, (*((u16 *)pDataBuf)) << 12); } @@ -343,7 +305,7 @@ HwHSSIThreeWire( /* Check if DONE is set. */ - for (TryCnt = 0; TryCnt < TC_3W_POLL_MAX_TRY_CNT; TryCnt++) { + for (TryCnt = 0; TryCnt < TC_3W_POLL_MAX_TRY_CNT; TryCnt++) { u1bTmp = read_nic_byte(dev, SW_3W_CMD1); if ((u1bTmp & SW_3W_CMD1_DONE) != 0) break; @@ -353,12 +315,12 @@ HwHSSIThreeWire( write_nic_byte(dev, SW_3W_CMD1, 0); - /* Read back data for read operation. */ - if (bWrite == 0) { - if (bSI) { + /* Read back data for read operation. */ + if (bWrite == 0) { + if (bSI) { /* Serial Interface : reg363_362[11:0] */ *((u16 *)pDataBuf) = read_nic_word(dev, SI_DATA_READ) ; - } else { + } else { /* Parallel Interface : reg361_360[11:0] */ *((u16 *)pDataBuf) = read_nic_word(dev, PI_DATA_READ); } @@ -366,13 +328,12 @@ HwHSSIThreeWire( *((u16 *)pDataBuf) &= 0x0FFF; } - } while (0); + } while (0); return bResult; } -void -RF_WriteReg(struct net_device *dev, u8 offset, u32 data) +void RF_WriteReg(struct net_device *dev, u8 offset, u32 data) { u32 data2Write; u8 len; @@ -400,11 +361,7 @@ u32 RF_ReadReg(struct net_device *dev, u8 offset) /* by Owen on 04/07/14 for writing BB register successfully */ -void -WriteBBPortUchar( - struct net_device *dev, - u32 Data - ) +void WriteBBPortUchar(struct net_device *dev, u32 Data) { /* u8 TimeoutCounter; */ u8 RegisterContent; @@ -421,11 +378,7 @@ WriteBBPortUchar( } } -u8 -ReadBBPortUchar( - struct net_device *dev, - u32 addr - ) +u8 ReadBBPortUchar(struct net_device *dev, u32 addr) { /*u8 TimeoutCounter; */ u8 RegisterContent; @@ -435,66 +388,62 @@ ReadBBPortUchar( return RegisterContent; } -/* {by amy 080312 */ /* - Description: - Perform Antenna settings with antenna diversity on 87SE. - Created by Roger, 2008.01.25. -*/ -bool -SetAntennaConfig87SE( - struct net_device *dev, - u8 DefaultAnt, /* 0: Main, 1: Aux. */ - bool bAntDiversity /* 1:Enable, 0: Disable. */ -) + * Description: + * Perform Antenna settings with antenna diversity on 87SE. + * Created by Roger, 2008.01.25. + */ +bool SetAntennaConfig87SE(struct net_device *dev, + u8 DefaultAnt, /* 0: Main, 1: Aux. */ + bool bAntDiversity) /* 1:Enable, 0: Disable. */ { struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev); bool bAntennaSwitched = true; /* printk("SetAntennaConfig87SE(): DefaultAnt(%d), bAntDiversity(%d)\n", DefaultAnt, bAntDiversity); */ - /* Threshold for antenna diversity. */ + /* Threshold for antenna diversity. */ write_phy_cck(dev, 0x0c, 0x09); /* Reg0c : 09 */ - if (bAntDiversity) { /* Enable Antenna Diversity. */ - if (DefaultAnt == 1) { /* aux antenna */ + if (bAntDiversity) { /* Enable Antenna Diversity. */ + if (DefaultAnt == 1) { /* aux antenna */ - /* Mac register, aux antenna */ + /* Mac register, aux antenna */ write_nic_byte(dev, ANTSEL, 0x00); - /* Config CCK RX antenna. */ + /* Config CCK RX antenna. */ write_phy_cck(dev, 0x11, 0xbb); /* Reg11 : bb */ write_phy_cck(dev, 0x01, 0xc7); /* Reg01 : c7 */ - /* Config OFDM RX antenna. */ - write_phy_ofdm(dev, 0x0D, 0x54); /* Reg0d : 54 */ - write_phy_ofdm(dev, 0x18, 0xb2); /* Reg18 : b2 */ - } else { /* use main antenna */ - /* Mac register, main antenna */ + /* Config OFDM RX antenna. */ + write_phy_ofdm(dev, 0x0D, 0x54); /* Reg0d : 54 */ + write_phy_ofdm(dev, 0x18, 0xb2); /* Reg18 : b2 */ + } else { /* use main antenna */ + /* Mac register, main antenna */ write_nic_byte(dev, ANTSEL, 0x03); - /* base band */ - /* Config CCK RX antenna. */ - write_phy_cck(dev, 0x11, 0x9b); /* Reg11 : 9b */ - write_phy_cck(dev, 0x01, 0xc7); /* Reg01 : c7 */ + /* base band */ + /* Config CCK RX antenna. */ + write_phy_cck(dev, 0x11, 0x9b); /* Reg11 : 9b */ + write_phy_cck(dev, 0x01, 0xc7); /* Reg01 : c7 */ /* Config OFDM RX antenna. */ write_phy_ofdm(dev, 0x0d, 0x5c); /* Reg0d : 5c */ write_phy_ofdm(dev, 0x18, 0xb2); /* Reg18 : b2 */ } - } else { + } else { /* Disable Antenna Diversity. */ - if (DefaultAnt == 1) { /* aux Antenna */ + if (DefaultAnt == 1) { /* aux Antenna */ /* Mac register, aux antenna */ write_nic_byte(dev, ANTSEL, 0x00); /* Config CCK RX antenna. */ - write_phy_cck(dev, 0x11, 0xbb); /* Reg11 : bb */ - write_phy_cck(dev, 0x01, 0x47); /* Reg01 : 47 */ + write_phy_cck(dev, 0x11, 0xbb); /* Reg11 : bb */ + write_phy_cck(dev, 0x01, 0x47); /* Reg01 : 47 */ /* Config OFDM RX antenna. */ - write_phy_ofdm(dev, 0x0D, 0x54); /* Reg0d : 54 */ - write_phy_ofdm(dev, 0x18, 0x32); /* Reg18 : 32 */ - } else { /* main Antenna */ + write_phy_ofdm(dev, 0x0D, 0x54); /* Reg0d : 54 */ + write_phy_ofdm(dev, 0x18, 0x32); /* Reg18 : 32 */ + } else { /* main Antenna */ /* Mac register, main antenna */ write_nic_byte(dev, ANTSEL, 0x03); @@ -502,25 +451,22 @@ SetAntennaConfig87SE( write_phy_cck(dev, 0x11, 0x9b); /* Reg11 : 9b */ write_phy_cck(dev, 0x01, 0x47); /* Reg01 : 47 */ - /* Config OFDM RX antenna. */ - write_phy_ofdm(dev, 0x0D, 0x5c); /* Reg0d : 5c */ - write_phy_ofdm(dev, 0x18, 0x32); /*Reg18 : 32 */ + /* Config OFDM RX antenna. */ + write_phy_ofdm(dev, 0x0D, 0x5c); /* Reg0d : 5c */ + write_phy_ofdm(dev, 0x18, 0x32); /*Reg18 : 32 */ } } priv->CurrAntennaIndex = DefaultAnt; /* Update default settings. */ return bAntennaSwitched; } -/* by amy 080312 */ /* ---------------------------------------------------------------- - * Hardware Initialization. - * the code is ported from Windows source code -----------------------------------------------------------------*/ - -void -ZEBRA_Config_85BASIC_HardCode( - struct net_device *dev - ) + *-------------------------------------------------------------- + * Hardware Initialization. + * the code is ported from Windows source code + *-------------------------------------------------------------- + */ + +void ZEBRA_Config_85BASIC_HardCode(struct net_device *dev) { struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev); @@ -532,163 +478,151 @@ ZEBRA_Config_85BASIC_HardCode( /* -============================================================================= - 87S_PCIE :: RADIOCFG.TXT -============================================================================= -*/ + *=========================================================================== + * 87S_PCIE :: RADIOCFG.TXT + *=========================================================================== + */ /* Page1 : reg16-reg30 */ - RF_WriteReg(dev, 0x00, 0x013f); mdelay(1); /* switch to page1 */ - u4bRF23 = RF_ReadReg(dev, 0x08); mdelay(1); - u4bRF24 = RF_ReadReg(dev, 0x09); mdelay(1); + RF_WriteReg(dev, 0x00, 0x013f); mdelay(1); /* switch to page1 */ + u4bRF23 = RF_ReadReg(dev, 0x08); mdelay(1); + u4bRF24 = RF_ReadReg(dev, 0x09); mdelay(1); if (u4bRF23 == 0x818 && u4bRF24 == 0x70C) { d_cut = 1; printk(KERN_INFO "rtl8187se: card type changed from C- to D-cut\n"); } - /* Page0 : reg0-reg15 */ - - RF_WriteReg(dev, 0x00, 0x009f); mdelay(1);/* 1 */ - - RF_WriteReg(dev, 0x01, 0x06e0); mdelay(1); - - RF_WriteReg(dev, 0x02, 0x004d); mdelay(1);/* 2 */ - - RF_WriteReg(dev, 0x03, 0x07f1); mdelay(1);/* 3 */ - - RF_WriteReg(dev, 0x04, 0x0975); mdelay(1); - RF_WriteReg(dev, 0x05, 0x0c72); mdelay(1); - RF_WriteReg(dev, 0x06, 0x0ae6); mdelay(1); - RF_WriteReg(dev, 0x07, 0x00ca); mdelay(1); - RF_WriteReg(dev, 0x08, 0x0e1c); mdelay(1); - RF_WriteReg(dev, 0x09, 0x02f0); mdelay(1); - RF_WriteReg(dev, 0x0a, 0x09d0); mdelay(1); - RF_WriteReg(dev, 0x0b, 0x01ba); mdelay(1); - RF_WriteReg(dev, 0x0c, 0x0640); mdelay(1); - RF_WriteReg(dev, 0x0d, 0x08df); mdelay(1); - RF_WriteReg(dev, 0x0e, 0x0020); mdelay(1); - RF_WriteReg(dev, 0x0f, 0x0990); mdelay(1); - + /* Page0 : reg0-reg15 */ + + RF_WriteReg(dev, 0x00, 0x009f); mdelay(1);/* 1 */ + RF_WriteReg(dev, 0x01, 0x06e0); mdelay(1); + RF_WriteReg(dev, 0x02, 0x004d); mdelay(1);/* 2 */ + RF_WriteReg(dev, 0x03, 0x07f1); mdelay(1);/* 3 */ + RF_WriteReg(dev, 0x04, 0x0975); mdelay(1); + RF_WriteReg(dev, 0x05, 0x0c72); mdelay(1); + RF_WriteReg(dev, 0x06, 0x0ae6); mdelay(1); + RF_WriteReg(dev, 0x07, 0x00ca); mdelay(1); + RF_WriteReg(dev, 0x08, 0x0e1c); mdelay(1); + RF_WriteReg(dev, 0x09, 0x02f0); mdelay(1); + RF_WriteReg(dev, 0x0a, 0x09d0); mdelay(1); + RF_WriteReg(dev, 0x0b, 0x01ba); mdelay(1); + RF_WriteReg(dev, 0x0c, 0x0640); mdelay(1); + RF_WriteReg(dev, 0x0d, 0x08df); mdelay(1); + RF_WriteReg(dev, 0x0e, 0x0020); mdelay(1); + RF_WriteReg(dev, 0x0f, 0x0990); mdelay(1); /* Page1 : reg16-reg30 */ - RF_WriteReg(dev, 0x00, 0x013f); mdelay(1); - - RF_WriteReg(dev, 0x03, 0x0806); mdelay(1); - - RF_WriteReg(dev, 0x04, 0x03a7); mdelay(1); - RF_WriteReg(dev, 0x05, 0x059b); mdelay(1); - RF_WriteReg(dev, 0x06, 0x0081); mdelay(1); - - - RF_WriteReg(dev, 0x07, 0x01A0); mdelay(1); + RF_WriteReg(dev, 0x00, 0x013f); mdelay(1); + RF_WriteReg(dev, 0x03, 0x0806); mdelay(1); + RF_WriteReg(dev, 0x04, 0x03a7); mdelay(1); + RF_WriteReg(dev, 0x05, 0x059b); mdelay(1); + RF_WriteReg(dev, 0x06, 0x0081); mdelay(1); + RF_WriteReg(dev, 0x07, 0x01A0); mdelay(1); /* Don't write RF23/RF24 to make a difference between 87S C cut and D cut. asked by SD3 stevenl. */ - RF_WriteReg(dev, 0x0a, 0x0001); mdelay(1); - RF_WriteReg(dev, 0x0b, 0x0418); mdelay(1); + RF_WriteReg(dev, 0x0a, 0x0001); mdelay(1); + RF_WriteReg(dev, 0x0b, 0x0418); mdelay(1); if (d_cut) { - RF_WriteReg(dev, 0x0c, 0x0fbe); mdelay(1); - RF_WriteReg(dev, 0x0d, 0x0008); mdelay(1); - RF_WriteReg(dev, 0x0e, 0x0807); mdelay(1); /* RX LO buffer */ - } else { - RF_WriteReg(dev, 0x0c, 0x0fbe); mdelay(1); - RF_WriteReg(dev, 0x0d, 0x0008); mdelay(1); - RF_WriteReg(dev, 0x0e, 0x0806); mdelay(1); /* RX LO buffer */ + RF_WriteReg(dev, 0x0c, 0x0fbe); mdelay(1); + RF_WriteReg(dev, 0x0d, 0x0008); mdelay(1); + RF_WriteReg(dev, 0x0e, 0x0807); mdelay(1); /* RX LO buffer */ + } else { + RF_WriteReg(dev, 0x0c, 0x0fbe); mdelay(1); + RF_WriteReg(dev, 0x0d, 0x0008); mdelay(1); + RF_WriteReg(dev, 0x0e, 0x0806); mdelay(1); /* RX LO buffer */ } - RF_WriteReg(dev, 0x0f, 0x0acc); mdelay(1); - - RF_WriteReg(dev, 0x00, 0x01d7); mdelay(1); /* 6 */ + RF_WriteReg(dev, 0x0f, 0x0acc); mdelay(1); + RF_WriteReg(dev, 0x00, 0x01d7); mdelay(1); /* 6 */ + RF_WriteReg(dev, 0x03, 0x0e00); mdelay(1); + RF_WriteReg(dev, 0x04, 0x0e50); mdelay(1); - RF_WriteReg(dev, 0x03, 0x0e00); mdelay(1); - RF_WriteReg(dev, 0x04, 0x0e50); mdelay(1); - for (i = 0; i <= 36; i++) { - RF_WriteReg(dev, 0x01, i); mdelay(1); + for (i = 0; i <= 36; i++) { + RF_WriteReg(dev, 0x01, i); mdelay(1); RF_WriteReg(dev, 0x02, ZEBRA_RF_RX_GAIN_TABLE[i]); mdelay(1); } - RF_WriteReg(dev, 0x05, 0x0203); mdelay(1); /* 203, 343 */ - RF_WriteReg(dev, 0x06, 0x0200); mdelay(1); /* 400 */ + RF_WriteReg(dev, 0x05, 0x0203); mdelay(1); /* 203, 343 */ + RF_WriteReg(dev, 0x06, 0x0200); mdelay(1); /* 400 */ + RF_WriteReg(dev, 0x00, 0x0137); mdelay(1); /* switch to reg16-reg30, and HSSI disable 137 */ + mdelay(10); /* Deay 10 ms. */ /* 0xfd */ - RF_WriteReg(dev, 0x00, 0x0137); mdelay(1); /* switch to reg16-reg30, and HSSI disable 137 */ - mdelay(10); /* Deay 10 ms. */ /* 0xfd */ + RF_WriteReg(dev, 0x0d, 0x0008); mdelay(1); /* Z4 synthesizer loop filter setting, 392 */ + mdelay(10); /* Deay 10 ms. */ /* 0xfd */ - RF_WriteReg(dev, 0x0d, 0x0008); mdelay(1); /* Z4 synthesizer loop filter setting, 392 */ - mdelay(10); /* Deay 10 ms. */ /* 0xfd */ + RF_WriteReg(dev, 0x00, 0x0037); mdelay(1); /* switch to reg0-reg15, and HSSI disable */ + mdelay(10); /* Deay 10 ms. */ /* 0xfd */ - RF_WriteReg(dev, 0x00, 0x0037); mdelay(1); /* switch to reg0-reg15, and HSSI disable */ - mdelay(10); /* Deay 10 ms. */ /* 0xfd */ + RF_WriteReg(dev, 0x04, 0x0160); mdelay(1); /* CBC on, Tx Rx disable, High gain */ + mdelay(10); /* Deay 10 ms. */ /* 0xfd */ - RF_WriteReg(dev, 0x04, 0x0160); mdelay(1); /* CBC on, Tx Rx disable, High gain */ - mdelay(10); /* Deay 10 ms. */ /* 0xfd */ + RF_WriteReg(dev, 0x07, 0x0080); mdelay(1); /* Z4 setted channel 1 */ + mdelay(10); /* Deay 10 ms. */ /* 0xfd */ - RF_WriteReg(dev, 0x07, 0x0080); mdelay(1); /* Z4 setted channel 1 */ - mdelay(10); /* Deay 10 ms. */ /* 0xfd */ + RF_WriteReg(dev, 0x02, 0x088D); mdelay(1); /* LC calibration */ + mdelay(200); /* Deay 200 ms. */ /* 0xfd */ + mdelay(10); /* Deay 10 ms. */ /* 0xfd */ + mdelay(10); /* Deay 10 ms. */ /* 0xfd */ - RF_WriteReg(dev, 0x02, 0x088D); mdelay(1); /* LC calibration */ - mdelay(200); /* Deay 200 ms. */ /* 0xfd */ - mdelay(10); /* Deay 10 ms. */ /* 0xfd */ - mdelay(10); /* Deay 10 ms. */ /* 0xfd */ + RF_WriteReg(dev, 0x00, 0x0137); mdelay(1); /* switch to reg16-reg30 137, and HSSI disable 137 */ + mdelay(10); /* Deay 10 ms. */ /* 0xfd */ - RF_WriteReg(dev, 0x00, 0x0137); mdelay(1); /* switch to reg16-reg30 137, and HSSI disable 137 */ - mdelay(10); /* Deay 10 ms. */ /* 0xfd */ - - RF_WriteReg(dev, 0x07, 0x0000); mdelay(1); - RF_WriteReg(dev, 0x07, 0x0180); mdelay(1); - RF_WriteReg(dev, 0x07, 0x0220); mdelay(1); - RF_WriteReg(dev, 0x07, 0x03E0); mdelay(1); + RF_WriteReg(dev, 0x07, 0x0000); mdelay(1); + RF_WriteReg(dev, 0x07, 0x0180); mdelay(1); + RF_WriteReg(dev, 0x07, 0x0220); mdelay(1); + RF_WriteReg(dev, 0x07, 0x03E0); mdelay(1); /* DAC calibration off 20070702 */ - RF_WriteReg(dev, 0x06, 0x00c1); mdelay(1); - RF_WriteReg(dev, 0x0a, 0x0001); mdelay(1); -/* {by amy 080312 */ + RF_WriteReg(dev, 0x06, 0x00c1); mdelay(1); + RF_WriteReg(dev, 0x0a, 0x0001); mdelay(1); /* For crystal calibration, added by Roger, 2007.12.11. */ - if (priv->bXtalCalibration) { /* reg 30. */ - /* enable crystal calibration. - RF Reg[30], (1)Xin:[12:9], Xout:[8:5], addr[4:0]. - (2)PA Pwr delay timer[15:14], default: 2.4us, set BIT15=0 - (3)RF signal on/off when calibration[13], default: on, set BIT13=0. - So we should minus 4 BITs offset. */ - RF_WriteReg(dev, 0x0f, (priv->XtalCal_Xin<<5) | (priv->XtalCal_Xout<<1) | BIT11 | BIT9); mdelay(1); + if (priv->bXtalCalibration) { /* reg 30. */ + /* + * enable crystal calibration. + * RF Reg[30], (1)Xin:[12:9], Xout:[8:5], addr[4:0]. + * (2)PA Pwr delay timer[15:14], default: 2.4us, set BIT15=0 + * (3)RF signal on/off when calibration[13], default: on, set BIT13=0. + * So we should minus 4 BITs offset. + */ + RF_WriteReg(dev, 0x0f, (priv->XtalCal_Xin<<5) | (priv->XtalCal_Xout<<1) | BIT11 | BIT9); mdelay(1); printk("ZEBRA_Config_85BASIC_HardCode(): (%02x)\n", - (priv->XtalCal_Xin<<5) | (priv->XtalCal_Xout<<1) | BIT11 | BIT9); - } else { + (priv->XtalCal_Xin<<5) | (priv->XtalCal_Xout<<1) | BIT11 | BIT9); + } else { /* using default value. Xin=6, Xout=6. */ - RF_WriteReg(dev, 0x0f, 0x0acc); mdelay(1); + RF_WriteReg(dev, 0x0f, 0x0acc); mdelay(1); } -/* by amy 080312 */ - RF_WriteReg(dev, 0x00, 0x00bf); mdelay(1); /* switch to reg0-reg15, and HSSI enable */ - RF_WriteReg(dev, 0x0d, 0x08df); mdelay(1); /* Rx BB start calibration, 00c//+edward */ - RF_WriteReg(dev, 0x02, 0x004d); mdelay(1); /* temperature meter off */ - RF_WriteReg(dev, 0x04, 0x0975); mdelay(1); /* Rx mode */ + RF_WriteReg(dev, 0x00, 0x00bf); mdelay(1); /* switch to reg0-reg15, and HSSI enable */ + RF_WriteReg(dev, 0x0d, 0x08df); mdelay(1); /* Rx BB start calibration, 00c//+edward */ + RF_WriteReg(dev, 0x02, 0x004d); mdelay(1); /* temperature meter off */ + RF_WriteReg(dev, 0x04, 0x0975); mdelay(1); /* Rx mode */ mdelay(10); /* Deay 10 ms.*/ /* 0xfe */ mdelay(10); /* Deay 10 ms.*/ /* 0xfe */ mdelay(10); /* Deay 10 ms.*/ /* 0xfe */ - RF_WriteReg(dev, 0x00, 0x0197); mdelay(1); /* Rx mode*/ /*+edward */ - RF_WriteReg(dev, 0x05, 0x05ab); mdelay(1); /* Rx mode*/ /*+edward */ - RF_WriteReg(dev, 0x00, 0x009f); mdelay(1); /* Rx mode*/ /*+edward */ - - RF_WriteReg(dev, 0x01, 0x0000); mdelay(1); /* Rx mode*/ /*+edward */ - RF_WriteReg(dev, 0x02, 0x0000); mdelay(1); /* Rx mode*/ /*+edward */ - /* power save parameters. */ + RF_WriteReg(dev, 0x00, 0x0197); mdelay(1); /* Rx mode*/ /*+edward */ + RF_WriteReg(dev, 0x05, 0x05ab); mdelay(1); /* Rx mode*/ /*+edward */ + RF_WriteReg(dev, 0x00, 0x009f); mdelay(1); /* Rx mode*/ /*+edward */ + RF_WriteReg(dev, 0x01, 0x0000); mdelay(1); /* Rx mode*/ /*+edward */ + RF_WriteReg(dev, 0x02, 0x0000); mdelay(1); /* Rx mode*/ /*+edward */ + /* power save parameters. */ u1b24E = read_nic_byte(dev, 0x24E); write_nic_byte(dev, 0x24E, (u1b24E & (~(BIT5|BIT6)))); /*============================================================================= - - ============================================================================= - CCKCONF.TXT - ============================================================================= - */ - /* [POWER SAVE] Power Saving Parameters by jong. 2007-11-27 - CCK reg0x00[7]=1'b1 :power saving for TX (default) - CCK reg0x00[6]=1'b1: power saving for RX (default) - CCK reg0x06[4]=1'b1: turn off channel estimation related circuits if not doing channel estimation. - CCK reg0x06[3]=1'b1: turn off unused circuits before cca = 1 - CCK reg0x06[2]=1'b1: turn off cck's circuit if macrst =0 - */ + * + *=========================================================================== + * CCKCONF.TXT + *=========================================================================== + * + * [POWER SAVE] Power Saving Parameters by jong. 2007-11-27 + * CCK reg0x00[7]=1'b1 :power saving for TX (default) + * CCK reg0x00[6]=1'b1: power saving for RX (default) + * CCK reg0x06[4]=1'b1: turn off channel estimation related circuits if not doing channel estimation. + * CCK reg0x06[3]=1'b1: turn off unused circuits before cca = 1 + * CCK reg0x06[2]=1'b1: turn off cck's circuit if macrst =0 + */ write_phy_cck(dev, 0x00, 0xc8); write_phy_cck(dev, 0x06, 0x1c); @@ -697,7 +631,7 @@ ZEBRA_Config_85BASIC_HardCode( write_phy_cck(dev, 0x2f, 0x06); write_phy_cck(dev, 0x01, 0x46); - /* power control */ + /* power control */ write_nic_byte(dev, CCK_TXAGC, 0x10); write_nic_byte(dev, OFDM_TXAGC, 0x1B); write_nic_byte(dev, ANTSEL, 0x03); @@ -705,14 +639,14 @@ ZEBRA_Config_85BASIC_HardCode( /* - ============================================================================= - AGC.txt - ============================================================================= - */ + *=========================================================================== + * AGC.txt + *=========================================================================== + */ write_phy_ofdm(dev, 0x00, 0x12); - for (i = 0; i < 128; i++) { + for (i = 0; i < 128; i++) { data = ZEBRA_AGC[i+1]; data = data << 8; @@ -730,49 +664,43 @@ ZEBRA_Config_85BASIC_HardCode( PlatformIOWrite4Byte(dev, PhyAddr, 0x00001080); /* Annie, 2006-05-05 */ /* - ============================================================================= - - ============================================================================= - OFDMCONF.TXT - ============================================================================= - */ - - for (i = 0; i < 60; i++) { + *=========================================================================== + * + *=========================================================================== + * OFDMCONF.TXT + *=========================================================================== + */ + + for (i = 0; i < 60; i++) { u4bRegOffset = i; u4bRegValue = OFDM_CONFIG[i]; WriteBBPortUchar(dev, - (0x00000080 | - (u4bRegOffset & 0x7f) | - ((u4bRegValue & 0xff) << 8))); + (0x00000080 | + (u4bRegOffset & 0x7f) | + ((u4bRegValue & 0xff) << 8))); } /* - ============================================================================= - by amy for antenna - ============================================================================= - */ -/* {by amy 080312 */ + *=========================================================================== + * by amy for antenna + *=========================================================================== + */ /* Config Sw/Hw Combinational Antenna Diversity. Added by Roger, 2008.02.26. */ SetAntennaConfig87SE(dev, priv->bDefaultAntenna1, priv->bSwAntennaDiverity); -/* by amy 080312} */ -/* by amy for antenna */ } -void -UpdateInitialGain( - struct net_device *dev - ) +void UpdateInitialGain(struct net_device *dev) { struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev); /* lzm add 080826 */ - if (priv->eRFPowerState != eRfOn) { + if (priv->eRFPowerState != eRfOn) { /* Don't access BB/RF under disable PLL situation. - RT_TRACE(COMP_DIG, DBG_LOUD, ("UpdateInitialGain - pHalData->eRFPowerState!=eRfOn\n")); - Back to the original state - */ + * RT_TRACE(COMP_DIG, DBG_LOUD, ("UpdateInitialGain - pHalData->eRFPowerState!=eRfOn\n")); + * Back to the original state + */ priv->InitialGain = priv->InitialGainBackUp; return; } @@ -826,7 +754,7 @@ UpdateInitialGain( write_phy_ofdm(dev, 0x05, 0xfc); mdelay(1); break; - default: /* MP */ + default: /* MP */ write_phy_ofdm(dev, 0x17, 0x26); mdelay(1); write_phy_ofdm(dev, 0x24, 0x86); mdelay(1); write_phy_ofdm(dev, 0x05, 0xfa); mdelay(1); @@ -834,14 +762,11 @@ UpdateInitialGain( } } /* - Description: - Tx Power tracking mechanism routine on 87SE. - Created by Roger, 2007.12.11. -*/ -void -InitTxPwrTracking87SE( - struct net_device *dev -) + * Description: + * Tx Power tracking mechanism routine on 87SE. + * Created by Roger, 2007.12.11. + */ +void InitTxPwrTracking87SE(struct net_device *dev) { u32 u4bRfReg; @@ -851,49 +776,41 @@ InitTxPwrTracking87SE( RF_WriteReg(dev, 0x02, u4bRfReg|PWR_METER_EN); mdelay(1); } -void -PhyConfig8185( - struct net_device *dev - ) +void PhyConfig8185(struct net_device *dev) { struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev); write_nic_dword(dev, RCR, priv->ReceiveConfig); priv->RFProgType = read_nic_byte(dev, CONFIG4) & 0x03; /* RF config */ ZEBRA_Config_85BASIC_HardCode(dev); -/* {by amy 080312 */ /* Set default initial gain state to 4, approved by SD3 DZ, by Bruce, 2007-06-06. */ - if (priv->bDigMechanism) { + if (priv->bDigMechanism) { if (priv->InitialGain == 0) priv->InitialGain = 4; } /* - Enable thermal meter indication to implement TxPower tracking on 87SE. - We initialize thermal meter here to avoid unsuccessful configuration. - Added by Roger, 2007.12.11. - */ + * Enable thermal meter indication to implement TxPower tracking on 87SE. + * We initialize thermal meter here to avoid unsuccessful configuration. + * Added by Roger, 2007.12.11. + */ if (priv->bTxPowerTrack) InitTxPwrTracking87SE(dev); -/* by amy 080312} */ priv->InitialGainBackUp = priv->InitialGain; UpdateInitialGain(dev); return; } -void -HwConfigureRTL8185( - struct net_device *dev - ) +void HwConfigureRTL8185(struct net_device *dev) { /* RTL8185_TODO: Determine Retrylimit, TxAGC, AutoRateFallback control. */ - u8 bUNIVERSAL_CONTROL_RL = 0; - u8 bUNIVERSAL_CONTROL_AGC = 1; - u8 bUNIVERSAL_CONTROL_ANT = 1; - u8 bAUTO_RATE_FALLBACK_CTL = 1; - u8 val8; + u8 bUNIVERSAL_CONTROL_RL = 0; + u8 bUNIVERSAL_CONTROL_AGC = 1; + u8 bUNIVERSAL_CONTROL_ANT = 1; + u8 bAUTO_RATE_FALLBACK_CTL = 1; + u8 val8; write_nic_word(dev, BRSR, 0x0fff); /* Retry limit */ val8 = read_nic_byte(dev, CW_CONF); @@ -907,24 +824,24 @@ HwConfigureRTL8185( /* Tx AGC */ val8 = read_nic_byte(dev, TXAGC_CTL); - if (bUNIVERSAL_CONTROL_AGC) { + if (bUNIVERSAL_CONTROL_AGC) { write_nic_byte(dev, CCK_TXAGC, 128); write_nic_byte(dev, OFDM_TXAGC, 128); val8 = val8 & 0xfe; - } else { + } else { val8 = val8 | 0x01 ; } write_nic_byte(dev, TXAGC_CTL, val8); - /* Tx Antenna including Feedback control */ + /* Tx Antenna including Feedback control */ val8 = read_nic_byte(dev, TXAGC_CTL); - if (bUNIVERSAL_CONTROL_ANT) { + if (bUNIVERSAL_CONTROL_ANT) { write_nic_byte(dev, ANTSEL, 0x00); val8 = val8 & 0xfd; - } else { + } else { val8 = val8 & (val8|0x02); /* xiong-2006-11-15 */ } @@ -933,7 +850,7 @@ HwConfigureRTL8185( /* Auto Rate fallback control */ val8 = read_nic_byte(dev, RATE_FALLBACK); val8 &= 0x7c; - if (bAUTO_RATE_FALLBACK_CTL) { + if (bAUTO_RATE_FALLBACK_CTL) { val8 |= RATE_FALLBACK_CTL_ENABLE | RATE_FALLBACK_CTL_AUTO_STEP1; /* <RJ_TODO_8185B> We shall set up the ARFR according to user's setting. */ @@ -942,40 +859,34 @@ HwConfigureRTL8185( write_nic_byte(dev, RATE_FALLBACK, val8); } -static void -MacConfig_85BASIC_HardCode( - struct net_device *dev) +static void MacConfig_85BASIC_HardCode(struct net_device *dev) { /* - ============================================================================ - MACREG.TXT - ============================================================================ - */ - int nLinesRead = 0; - - u32 u4bRegOffset, u4bRegValue, u4bPageIndex = 0; - int i; + *========================================================================== + * MACREG.TXT + *========================================================================== + */ + int nLinesRead = 0; + u32 u4bRegOffset, u4bRegValue, u4bPageIndex = 0; + int i; nLinesRead = sizeof(MAC_REG_TABLE)/2; - for (i = 0; i < nLinesRead; i++) { /* nLinesRead=101 */ + for (i = 0; i < nLinesRead; i++) { /* nLinesRead=101 */ u4bRegOffset = MAC_REG_TABLE[i][0]; u4bRegValue = MAC_REG_TABLE[i][1]; if (u4bRegOffset == 0x5e) u4bPageIndex = u4bRegValue; - else - u4bRegOffset |= (u4bPageIndex << 8); + u4bRegOffset |= (u4bPageIndex << 8); write_nic_byte(dev, u4bRegOffset, (u8)u4bRegValue); } /* ============================================================================ */ } -static void -MacConfig_85BASIC( - struct net_device *dev) +static void MacConfig_85BASIC(struct net_device *dev) { u8 u1DA; @@ -994,18 +905,18 @@ MacConfig_85BASIC( PlatformIOWrite4Byte(dev, 0x1F4, 0x00000000); PlatformIOWrite1Byte(dev, 0x1F8, 0x00); - /* Asked for by SD3 CM Lin, 2006.06.27, by rcnjko. */ - /* power save parameter based on "87SE power save parameters 20071127.doc", as follow. */ + /* Asked for by SD3 CM Lin, 2006.06.27, by rcnjko. */ + /* power save parameter based on "87SE power save parameters 20071127.doc", as follow. */ /* Enable DA10 TX power saving */ u1DA = read_nic_byte(dev, PHYPR); write_nic_byte(dev, PHYPR, (u1DA | BIT2)); - /* POWER: */ + /* POWER: */ write_nic_word(dev, 0x360, 0x1000); write_nic_word(dev, 0x362, 0x1000); - /* AFE. */ + /* AFE. */ write_nic_word(dev, 0x370, 0x0560); write_nic_word(dev, 0x372, 0x0560); write_nic_word(dev, 0x374, 0x0DA4); @@ -1013,54 +924,48 @@ MacConfig_85BASIC( write_nic_word(dev, 0x378, 0x0560); write_nic_word(dev, 0x37A, 0x0560); write_nic_word(dev, 0x37C, 0x00EC); - write_nic_word(dev, 0x37E, 0x00EC); /*+edward */ + write_nic_word(dev, 0x37E, 0x00EC); /* +edward */ write_nic_byte(dev, 0x24E, 0x01); } -u8 -GetSupportedWirelessMode8185( - struct net_device *dev -) +u8 GetSupportedWirelessMode8185(struct net_device *dev) { - u8 btSupportedWirelessMode = 0; + u8 btSupportedWirelessMode = 0; btSupportedWirelessMode = (WIRELESS_MODE_B | WIRELESS_MODE_G); return btSupportedWirelessMode; } -void -ActUpdateChannelAccessSetting( - struct net_device *dev, - WIRELESS_MODE WirelessMode, - PCHANNEL_ACCESS_SETTING ChnlAccessSetting - ) +void ActUpdateChannelAccessSetting(struct net_device *dev, + WIRELESS_MODE WirelessMode, + PCHANNEL_ACCESS_SETTING ChnlAccessSetting) { - struct r8180_priv *priv = ieee80211_priv(dev); - struct ieee80211_device *ieee = priv->ieee80211; + struct r8180_priv *priv = ieee80211_priv(dev); + struct ieee80211_device *ieee = priv->ieee80211; AC_CODING eACI; AC_PARAM AcParam; - u8 bFollowLegacySetting = 0; - u8 u1bAIFS; + u8 bFollowLegacySetting = 0; + u8 u1bAIFS; /* - <RJ_TODO_8185B> - TODO: We still don't know how to set up these registers, just follow WMAC to - verify 8185B FPAG. - - <RJ_TODO_8185B> - Jong said CWmin/CWmax register are not functional in 8185B, - so we shall fill channel access realted register into AC parameter registers, - even in nQBss. - */ + * <RJ_TODO_8185B> + * TODO: We still don't know how to set up these registers, just follow WMAC to + * verify 8185B FPAG. + * + * <RJ_TODO_8185B> + * Jong said CWmin/CWmax register are not functional in 8185B, + * so we shall fill channel access realted register into AC parameter registers, + * even in nQBss. + */ ChnlAccessSetting->SIFS_Timer = 0x22; /* Suggested by Jong, 2005.12.08. */ - ChnlAccessSetting->DIFS_Timer = 0x1C; /* 2006.06.02, by rcnjko. */ - ChnlAccessSetting->SlotTimeTimer = 9; /* 2006.06.02, by rcnjko. */ - ChnlAccessSetting->EIFS_Timer = 0x5B; /* Suggested by wcchu, it is the default value of EIFS register, 2005.12.08. */ - ChnlAccessSetting->CWminIndex = 3; /* 2006.06.02, by rcnjko. */ - ChnlAccessSetting->CWmaxIndex = 7; /* 2006.06.02, by rcnjko. */ + ChnlAccessSetting->DIFS_Timer = 0x1C; /* 2006.06.02, by rcnjko. */ + ChnlAccessSetting->SlotTimeTimer = 9; /* 2006.06.02, by rcnjko. */ + ChnlAccessSetting->EIFS_Timer = 0x5B; /* Suggested by wcchu, it is the default value of EIFS register, 2005.12.08. */ + ChnlAccessSetting->CWminIndex = 3; /* 2006.06.02, by rcnjko. */ + ChnlAccessSetting->CWmaxIndex = 7; /* 2006.06.02, by rcnjko. */ write_nic_byte(dev, SIFS, ChnlAccessSetting->SIFS_Timer); - write_nic_byte(dev, SLOT, ChnlAccessSetting->SlotTimeTimer); /* Rewrited from directly use PlatformEFIOWrite1Byte(), by Annie, 2006-03-29. */ + write_nic_byte(dev, SLOT, ChnlAccessSetting->SlotTimeTimer); /* Rewrited from directly use PlatformEFIOWrite1Byte(), by Annie, 2006-03-29. */ u1bAIFS = aSifsTime + (2 * ChnlAccessSetting->SlotTimeTimer); @@ -1074,17 +979,17 @@ ActUpdateChannelAccessSetting( } /* this setting is copied from rtl8187B. xiong-2006-11-13 */ - if (bFollowLegacySetting) { + if (bFollowLegacySetting) { /* - Follow 802.11 seeting to AC parameter, all AC shall use the same parameter. - 2005.12.01, by rcnjko. - */ + * Follow 802.11 seeting to AC parameter, all AC shall use the same parameter. + * 2005.12.01, by rcnjko. + */ AcParam.longData = 0; AcParam.f.AciAifsn.f.AIFSN = 2; /* Follow 802.11 DIFS. */ AcParam.f.AciAifsn.f.ACM = 0; - AcParam.f.Ecw.f.ECWmin = ChnlAccessSetting->CWminIndex; /* Follow 802.11 CWmin. */ - AcParam.f.Ecw.f.ECWmax = ChnlAccessSetting->CWmaxIndex; /* Follow 802.11 CWmax. */ + AcParam.f.Ecw.f.ECWmin = ChnlAccessSetting->CWminIndex; /* Follow 802.11 CWmin. */ + AcParam.f.Ecw.f.ECWmax = ChnlAccessSetting->CWmaxIndex; /* Follow 802.11 CWmax. */ AcParam.f.TXOPLimit = 0; /* lzm reserved 080826 */ @@ -1095,7 +1000,7 @@ ActUpdateChannelAccessSetting( if (ieee->iw_mode == IW_MODE_ADHOC) AcParam.f.TXOPLimit = 0x0020; - for (eACI = 0; eACI < AC_MAX; eACI++) { + for (eACI = 0; eACI < AC_MAX; eACI++) { AcParam.f.AciAifsn.f.ACI = (u8)eACI; { PAC_PARAM pAcParam = (PAC_PARAM)(&AcParam); @@ -1103,7 +1008,7 @@ ActUpdateChannelAccessSetting( u8 u1bAIFS; u32 u4bAcParam; - /* Retrive paramters to udpate. */ + /* Retrieve paramters to update. */ eACI = pAcParam->f.AciAifsn.f.ACI; u1bAIFS = pAcParam->f.AciAifsn.f.AIFSN * ChnlAccessSetting->SlotTimeTimer + aSifsTime; u4bAcParam = ((((u32)(pAcParam->f.TXOPLimit)) << AC_PARAM_TXOP_LIMIT_OFFSET) | @@ -1111,7 +1016,7 @@ ActUpdateChannelAccessSetting( (((u32)(pAcParam->f.Ecw.f.ECWmin)) << AC_PARAM_ECW_MIN_OFFSET) | (((u32)u1bAIFS) << AC_PARAM_AIFS_OFFSET)); - switch (eACI) { + switch (eACI) { case AC1_BK: /* write_nic_dword(dev, AC_BK_PARAM, u4bAcParam); */ break; @@ -1133,47 +1038,46 @@ ActUpdateChannelAccessSetting( break; } - /* Cehck ACM bit. */ + /* Cehck ACM bit. */ /* If it is set, immediately set ACM control bit to downgrading AC for passing WMM testplan. Annie, 2005-12-13. */ { PACI_AIFSN pAciAifsn = (PACI_AIFSN)(&pAcParam->f.AciAifsn); AC_CODING eACI = pAciAifsn->f.ACI; - /*modified Joseph */ - /*for 8187B AsynIORead issue */ + /*for 8187B AsynIORead issue */ u8 AcmCtrl = 0; - if (pAciAifsn->f.ACM) { + if (pAciAifsn->f.ACM) { /* ACM bit is 1. */ - switch (eACI) { + switch (eACI) { case AC0_BE: - AcmCtrl |= (BEQ_ACM_EN|BEQ_ACM_CTL|ACM_HW_EN); /* or 0x21 */ + AcmCtrl |= (BEQ_ACM_EN|BEQ_ACM_CTL|ACM_HW_EN); /* or 0x21 */ break; case AC2_VI: - AcmCtrl |= (VIQ_ACM_EN|VIQ_ACM_CTL|ACM_HW_EN); /* or 0x42 */ + AcmCtrl |= (VIQ_ACM_EN|VIQ_ACM_CTL|ACM_HW_EN); /* or 0x42 */ break; case AC3_VO: - AcmCtrl |= (VOQ_ACM_EN|VOQ_ACM_CTL|ACM_HW_EN); /* or 0x84 */ + AcmCtrl |= (VOQ_ACM_EN|VOQ_ACM_CTL|ACM_HW_EN); /* or 0x84 */ break; default: DMESGW("SetHwReg8185(): [HW_VAR_ACM_CTRL] ACM set failed: eACI is %d\n", eACI); break; } - } else { + } else { /* ACM bit is 0. */ - switch (eACI) { + switch (eACI) { case AC0_BE: - AcmCtrl &= ((~BEQ_ACM_EN) & (~BEQ_ACM_CTL) & (~ACM_HW_EN)); /* and 0xDE */ + AcmCtrl &= ((~BEQ_ACM_EN) & (~BEQ_ACM_CTL) & (~ACM_HW_EN)); /* and 0xDE */ break; case AC2_VI: - AcmCtrl &= ((~VIQ_ACM_EN) & (~VIQ_ACM_CTL) & (~ACM_HW_EN)); /* and 0xBD */ + AcmCtrl &= ((~VIQ_ACM_EN) & (~VIQ_ACM_CTL) & (~ACM_HW_EN)); /* and 0xBD */ break; case AC3_VO: - AcmCtrl &= ((~VOQ_ACM_EN) & (~VOQ_ACM_CTL) & (~ACM_HW_EN)); /* and 0x7B */ + AcmCtrl &= ((~VOQ_ACM_EN) & (~VOQ_ACM_CTL) & (~ACM_HW_EN)); /* and 0x7B */ break; default: @@ -1187,53 +1091,51 @@ ActUpdateChannelAccessSetting( } } -void -ActSetWirelessMode8185( - struct net_device *dev, - u8 btWirelessMode - ) +void ActSetWirelessMode8185(struct net_device *dev, u8 btWirelessMode) { - struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev); - struct ieee80211_device *ieee = priv->ieee80211; + struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev); + struct ieee80211_device *ieee = priv->ieee80211; u8 btSupportedWirelessMode = GetSupportedWirelessMode8185(dev); if ((btWirelessMode & btSupportedWirelessMode) == 0) { - /* Don't switch to unsupported wireless mode, 2006.02.15, by rcnjko. */ + /* Don't switch to unsupported wireless mode, 2006.02.15, by rcnjko. */ DMESGW("ActSetWirelessMode8185(): WirelessMode(%d) is not supported (%d)!\n", btWirelessMode, btSupportedWirelessMode); return; } - /* 1. Assign wireless mode to swtich if necessary. */ - if (btWirelessMode == WIRELESS_MODE_AUTO) { - if ((btSupportedWirelessMode & WIRELESS_MODE_A)) { + /* 1. Assign wireless mode to switch if necessary. */ + if (btWirelessMode == WIRELESS_MODE_AUTO) { + if ((btSupportedWirelessMode & WIRELESS_MODE_A)) { btWirelessMode = WIRELESS_MODE_A; - } else if (btSupportedWirelessMode & WIRELESS_MODE_G) { + } else if (btSupportedWirelessMode & WIRELESS_MODE_G) { btWirelessMode = WIRELESS_MODE_G; - } else if ((btSupportedWirelessMode & WIRELESS_MODE_B)) { - btWirelessMode = WIRELESS_MODE_B; - } else { - DMESGW("ActSetWirelessMode8185(): No valid wireless mode supported, btSupportedWirelessMode(%x)!!!\n", - btSupportedWirelessMode); + } else if ((btSupportedWirelessMode & WIRELESS_MODE_B)) { btWirelessMode = WIRELESS_MODE_B; + } else { + DMESGW("ActSetWirelessMode8185(): No valid wireless mode supported, btSupportedWirelessMode(%x)!!!\n", + btSupportedWirelessMode); + btWirelessMode = WIRELESS_MODE_B; } } - /* 2. Swtich band: RF or BB specific actions, + /* + * 2. Swtich band: RF or BB specific actions, * for example, refresh tables in omc8255, or change initial gain if necessary. * Nothing to do for Zebra to switch band. - * Update current wireless mode if we swtich to specified band successfully. */ + * Update current wireless mode if we switch to specified band successfully. + */ ieee->mode = (WIRELESS_MODE)btWirelessMode; - /* 3. Change related setting. */ - if( ieee->mode == WIRELESS_MODE_A ) { + /* 3. Change related setting. */ + if( ieee->mode == WIRELESS_MODE_A ) { DMESG("WIRELESS_MODE_A\n"); - } else if( ieee->mode == WIRELESS_MODE_B ) { - DMESG("WIRELESS_MODE_B\n"); - } else if( ieee->mode == WIRELESS_MODE_G ) { - DMESG("WIRELESS_MODE_G\n"); + } else if( ieee->mode == WIRELESS_MODE_B ) { + DMESG("WIRELESS_MODE_B\n"); + } else if( ieee->mode == WIRELESS_MODE_G ) { + DMESG("WIRELESS_MODE_G\n"); } ActUpdateChannelAccessSetting( dev, ieee->mode, &priv->ChannelAccessSetting); } @@ -1245,22 +1147,16 @@ void rtl8185b_irq_enable(struct net_device *dev) priv->irq_enabled = 1; write_nic_dword(dev, IMR, priv->IntrMask); } -/* by amy for power save */ -void -DrvIFIndicateDisassociation( - struct net_device *dev, - u16 reason - ) + +void DrvIFIndicateDisassociation(struct net_device *dev, u16 reason) { /* nothing is needed after disassociation request. */ - } -void -MgntDisconnectIBSS( - struct net_device *dev -) +} + +void MgntDisconnectIBSS(struct net_device *dev) { struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev); - u8 i; + u8 i; DrvIFIndicateDisassociation(dev, unspec_reason); @@ -1271,166 +1167,143 @@ MgntDisconnectIBSS( priv->ieee80211->state = IEEE80211_NOLINK; /* - Stop Beacon. - - Vista add a Adhoc profile, HW radio off until OID_DOT11_RESET_REQUEST - Driver would set MSR=NO_LINK, then HW Radio ON, MgntQueue Stuck. - Because Bcn DMA isn't complete, mgnt queue would stuck until Bcn packet send. - - Disable Beacon Queue Own bit, suggested by jong */ + * Stop Beacon. + * + * Vista add a Adhoc profile, HW radio off until OID_DOT11_RESET_REQUEST + * Driver would set MSR=NO_LINK, then HW Radio ON, MgntQueue Stuck. + * Because Bcn DMA isn't complete, mgnt queue would stuck until Bcn packet send. + * + * Disable Beacon Queue Own bit, suggested by jong + */ ieee80211_stop_send_beacons(priv->ieee80211); priv->ieee80211->link_change(dev); notify_wx_assoc_event(priv->ieee80211); } -void -MlmeDisassociateRequest( - struct net_device *dev, - u8 *asSta, - u8 asRsn - ) + +void MlmeDisassociateRequest(struct net_device *dev, u8 *asSta, u8 asRsn) { struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev); u8 i; SendDisassociation(priv->ieee80211, asSta, asRsn); - if (memcmp(priv->ieee80211->current_network.bssid, asSta, 6) == 0) { - /*ShuChen TODO: change media status. */ - /*ShuChen TODO: What to do when disassociate. */ + if (memcmp(priv->ieee80211->current_network.bssid, asSta, 6) == 0) { + /* ShuChen TODO: change media status. */ + /* ShuChen TODO: What to do when disassociate. */ DrvIFIndicateDisassociation(dev, unspec_reason); - - for (i = 0; i < 6; i++) priv->ieee80211->current_network.bssid[i] = 0x22; ieee80211_disassociate(priv->ieee80211); } - } -void -MgntDisconnectAP( - struct net_device *dev, - u8 asRsn -) +void MgntDisconnectAP(struct net_device *dev, u8 asRsn) { struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev); /* - Commented out by rcnjko, 2005.01.27: - I move SecClearAllKeys() to MgntActSet_802_11_DISASSOCIATE(). - - 2004/09/15, kcwu, the key should be cleared, or the new handshaking will not success - - In WPA WPA2 need to Clear all key ... because new key will set after new handshaking. - 2004.10.11, by rcnjko. */ + * Commented out by rcnjko, 2005.01.27: + * I move SecClearAllKeys() to MgntActSet_802_11_DISASSOCIATE(). + * + * 2004/09/15, kcwu, the key should be cleared, or the new handshaking will not success + * + * In WPA WPA2 need to Clear all key ... because new key will set after new handshaking. + * 2004.10.11, by rcnjko. + */ MlmeDisassociateRequest(dev, priv->ieee80211->current_network.bssid, asRsn); priv->ieee80211->state = IEEE80211_NOLINK; } -bool -MgntDisconnect( - struct net_device *dev, - u8 asRsn -) + +bool MgntDisconnect(struct net_device *dev, u8 asRsn) { struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev); /* - Schedule an workitem to wake up for ps mode, 070109, by rcnjko. - */ + * Schedule an workitem to wake up for ps mode, 070109, by rcnjko. + */ if (IS_DOT11D_ENABLE(priv->ieee80211)) Dot11d_Reset(priv->ieee80211); - /* In adhoc mode, update beacon frame. */ + /* In adhoc mode, update beacon frame. */ if (priv->ieee80211->state == IEEE80211_LINKED) { if (priv->ieee80211->iw_mode == IW_MODE_ADHOC) MgntDisconnectIBSS(dev); - if (priv->ieee80211->iw_mode == IW_MODE_INFRA) { - /* We clear key here instead of MgntDisconnectAP() because that - MgntActSet_802_11_DISASSOCIATE() is an interface called by OS, - e.g. OID_802_11_DISASSOCIATE in Windows while as MgntDisconnectAP() is - used to handle disassociation related things to AP, e.g. send Disassoc - frame to AP. 2005.01.27, by rcnjko. */ + if (priv->ieee80211->iw_mode == IW_MODE_INFRA) { + /* + * We clear key here instead of MgntDisconnectAP() because that + * MgntActSet_802_11_DISASSOCIATE() is an interface called by OS, + * e.g. OID_802_11_DISASSOCIATE in Windows while as MgntDisconnectAP() is + * used to handle disassociation related things to AP, e.g. send Disassoc + * frame to AP. 2005.01.27, by rcnjko. + */ MgntDisconnectAP(dev, asRsn); } - /* Inidicate Disconnect, 2005.02.23, by rcnjko. */ + /* Indicate Disconnect, 2005.02.23, by rcnjko. */ } return true; } /* - Description: - Chang RF Power State. - Note that, only MgntActSet_RF_State() is allowed to set HW_VAR_RF_STATE. - - Assumption: - PASSIVE LEVEL. -*/ -bool -SetRFPowerState( - struct net_device *dev, - RT_RF_POWER_STATE eRFPowerState - ) + * Description: + * Chang RF Power State. + * Note that, only MgntActSet_RF_State() is allowed to set HW_VAR_RF_STATE. + * + * Assumption: + * PASSIVE LEVEL. + */ +bool SetRFPowerState(struct net_device *dev, RT_RF_POWER_STATE eRFPowerState) { - struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev); - bool bResult = false; + struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev); + bool bResult = false; if (eRFPowerState == priv->eRFPowerState) return bResult; - bResult = SetZebraRFPowerState8185(dev, eRFPowerState); + bResult = SetZebraRFPowerState8185(dev, eRFPowerState); return bResult; } -void -HalEnableRx8185Dummy( - struct net_device *dev - ) + +void HalEnableRx8185Dummy(struct net_device *dev) { } -void -HalDisableRx8185Dummy( - struct net_device *dev - ) + +void HalDisableRx8185Dummy(struct net_device *dev) { } -bool -MgntActSet_RF_State( - struct net_device *dev, - RT_RF_POWER_STATE StateToSet, - u32 ChangeSource - ) +bool MgntActSet_RF_State(struct net_device *dev, RT_RF_POWER_STATE StateToSet, u32 ChangeSource) { - struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev); - bool bActionAllowed = false; - bool bConnectBySSID = false; - RT_RF_POWER_STATE rtState; - u16 RFWaitCounter = 0; + struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev); + bool bActionAllowed = false; + bool bConnectBySSID = false; + RT_RF_POWER_STATE rtState; + u16 RFWaitCounter = 0; unsigned long flag; /* - Prevent the race condition of RF state change. By Bruce, 2007-11-28. - Only one thread can change the RF state at one time, and others should wait to be executed. - */ - while (true) { + * Prevent the race condition of RF state change. By Bruce, 2007-11-28. + * Only one thread can change the RF state at one time, and others should wait to be executed. + */ + while (true) { spin_lock_irqsave(&priv->rf_ps_lock, flag); - if (priv->RFChangeInProgress) { + if (priv->RFChangeInProgress) { spin_unlock_irqrestore(&priv->rf_ps_lock, flag); /* Set RF after the previous action is done. */ - while (priv->RFChangeInProgress) { + while (priv->RFChangeInProgress) { RFWaitCounter++; udelay(1000); /* 1 ms */ - /* Wait too long, return FALSE to avoid to be stuck here. */ - if (RFWaitCounter > 1000) { /* 1sec */ + /* Wait too long, return FALSE to avoid to be stuck here. */ + if (RFWaitCounter > 1000) { /* 1sec */ printk("MgntActSet_RF_State(): Wait too long to set RF\n"); - /* TODO: Reset RF state? */ + /* TODO: Reset RF state? */ return false; } } - } else { + } else { priv->RFChangeInProgress = true; spin_unlock_irqrestore(&priv->rf_ps_lock, flag); break; @@ -1438,12 +1311,12 @@ MgntActSet_RF_State( } rtState = priv->eRFPowerState; - switch (StateToSet) { + switch (StateToSet) { case eRfOn: /* - Turn On RF no matter the IPS setting because we need to update the RF state to Ndis under Vista, or - the Windows does not allow the driver to perform site survey any more. By Bruce, 2007-10-02. - */ + * Turn On RF no matter the IPS setting because we need to update the RF state to Ndis under Vista, or + * the Windows does not allow the driver to perform site survey any more. By Bruce, 2007-10-02. + */ priv->RfOffReason &= (~ChangeSource); if (!priv->RfOffReason) { @@ -1453,25 +1326,24 @@ MgntActSet_RF_State( if (rtState == eRfOff && ChangeSource >= RF_CHANGE_BY_HW && !priv->bInHctTest) bConnectBySSID = true; - } else - ; + } else + ; break; case eRfOff: - /* 070125, rcnjko: we always keep connected in AP mode. */ - - if (priv->RfOffReason > RF_CHANGE_BY_IPS) { - /* - 060808, Annie: - Disconnect to current BSS when radio off. Asked by QuanTa. - - Calling MgntDisconnect() instead of MgntActSet_802_11_DISASSOCIATE(), - because we do NOT need to set ssid to dummy ones. - */ - MgntDisconnect(dev, disas_lv_ss); - - /* Clear content of bssDesc[] and bssDesc4Query[] to avoid reporting old bss to UI. */ - } + /* 070125, rcnjko: we always keep connected in AP mode. */ + + if (priv->RfOffReason > RF_CHANGE_BY_IPS) { + /* + * 060808, Annie: + * Disconnect to current BSS when radio off. Asked by QuanTa. + * + * Calling MgntDisconnect() instead of MgntActSet_802_11_DISASSOCIATE(), + * because we do NOT need to set ssid to dummy ones. + */ + MgntDisconnect(dev, disas_lv_ss); + /* Clear content of bssDesc[] and bssDesc4Query[] to avoid reporting old bss to UI. */ + } priv->RfOffReason |= ChangeSource; bActionAllowed = true; @@ -1484,14 +1356,14 @@ MgntActSet_RF_State( break; } - if (bActionAllowed) { - /* Config HW to the specified mode. */ + if (bActionAllowed) { + /* Config HW to the specified mode. */ SetRFPowerState(dev, StateToSet); /* Turn on RF. */ - if (StateToSet == eRfOn) { + if (StateToSet == eRfOn) { HalEnableRx8185Dummy(dev); - if (bConnectBySSID) { + if (bConnectBySSID) { /* by amy not supported */ } } @@ -1507,69 +1379,61 @@ MgntActSet_RF_State( spin_unlock_irqrestore(&priv->rf_ps_lock, flag); return bActionAllowed; } -void -InactivePowerSave( - struct net_device *dev - ) + +void InactivePowerSave(struct net_device *dev) { struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev); /* - This flag "bSwRfProcessing", indicates the status of IPS procedure, should be set if the IPS workitem - is really scheduled. - The old code, sets this flag before scheduling the IPS workitem and however, at the same time the - previous IPS workitem did not end yet, fails to schedule the current workitem. Thus, bSwRfProcessing - blocks the IPS procedure of switching RF. - */ + * This flag "bSwRfProcessing", indicates the status of IPS procedure, should be set if the IPS workitem + * is really scheduled. + * The old code, sets this flag before scheduling the IPS workitem and however, at the same time the + * previous IPS workitem did not end yet, fails to schedule the current workitem. Thus, bSwRfProcessing + * blocks the IPS procedure of switching RF. + */ priv->bSwRfProcessing = true; MgntActSet_RF_State(dev, priv->eInactivePowerState, RF_CHANGE_BY_IPS); /* - To solve CAM values miss in RF OFF, rewrite CAM values after RF ON. By Bruce, 2007-09-20. - */ + * To solve CAM values miss in RF OFF, rewrite CAM values after RF ON. By Bruce, 2007-09-20. + */ priv->bSwRfProcessing = false; } /* - Description: - Enter the inactive power save mode. RF will be off -*/ -void -IPSEnter( - struct net_device *dev - ) + * Description: + * Enter the inactive power save mode. RF will be off + */ +void IPSEnter(struct net_device *dev) { struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev); RT_RF_POWER_STATE rtState; - if (priv->bInactivePs) { + if (priv->bInactivePs) { rtState = priv->eRFPowerState; /* - Do not enter IPS in the following conditions: - (1) RF is already OFF or Sleep - (2) bSwRfProcessing (indicates the IPS is still under going) - (3) Connectted (only disconnected can trigger IPS) - (4) IBSS (send Beacon) - (5) AP mode (send Beacon) - */ + * Do not enter IPS in the following conditions: + * (1) RF is already OFF or Sleep + * (2) bSwRfProcessing (indicates the IPS is still under going) + * (3) Connected (only disconnected can trigger IPS) + * (4) IBSS (send Beacon) + * (5) AP mode (send Beacon) + */ if (rtState == eRfOn && !priv->bSwRfProcessing - && (priv->ieee80211->state != IEEE80211_LINKED)) { + && (priv->ieee80211->state != IEEE80211_LINKED)) { priv->eInactivePowerState = eRfOff; InactivePowerSave(dev); } } } -void -IPSLeave( - struct net_device *dev - ) +void IPSLeave(struct net_device *dev) { struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev); RT_RF_POWER_STATE rtState; - if (priv->bInactivePs) { + if (priv->bInactivePs) { rtState = priv->eRFPowerState; - if ((rtState == eRfOff || rtState == eRfSleep) && (!priv->bSwRfProcessing) && priv->RfOffReason <= RF_CHANGE_BY_IPS) { + if ((rtState == eRfOff || rtState == eRfSleep) && (!priv->bSwRfProcessing) && priv->RfOffReason <= RF_CHANGE_BY_IPS) { priv->eInactivePowerState = eRfOn; InactivePowerSave(dev); } @@ -1582,8 +1446,8 @@ void rtl8185b_adapter_start(struct net_device *dev) struct ieee80211_device *ieee = priv->ieee80211; u8 SupportedWirelessMode; - u8 InitWirelessMode; - u8 bInvalidWirelessMode = 0; + u8 InitWirelessMode; + u8 bInvalidWirelessMode = 0; u8 tmpu8; u8 btCR9346; u8 TmpU1b; @@ -1598,89 +1462,89 @@ void rtl8185b_adapter_start(struct net_device *dev) HwConfigureRTL8185(dev); write_nic_dword(dev, MAC0, ((u32 *)dev->dev_addr)[0]); write_nic_word(dev, MAC4, ((u32 *)dev->dev_addr)[1] & 0xffff); - write_nic_byte(dev, MSR, read_nic_byte(dev, MSR) & 0xf3); /* default network type to 'No Link' */ + write_nic_byte(dev, MSR, read_nic_byte(dev, MSR) & 0xf3); /* default network type to 'No Link' */ write_nic_word(dev, BcnItv, 100); write_nic_word(dev, AtimWnd, 2); PlatformIOWrite2Byte(dev, FEMR, 0xFFFF); write_nic_byte(dev, WPA_CONFIG, 0); MacConfig_85BASIC(dev); - /* Override the RFSW_CTRL (MAC offset 0x272-0x273), 2006.06.07, by rcnjko. */ - /* BT_DEMO_BOARD type */ + /* Override the RFSW_CTRL (MAC offset 0x272-0x273), 2006.06.07, by rcnjko. */ + /* BT_DEMO_BOARD type */ PlatformIOWrite2Byte(dev, RFSW_CTRL, 0x569a); /* - ----------------------------------------------------------------------------- - Set up PHY related. - ----------------------------------------------------------------------------- - */ - /* Enable Config3.PARAM_En to revise AnaaParm. */ - write_nic_byte(dev, CR9346, 0xc0); /* enable config register write */ + *--------------------------------------------------------------------------- + * Set up PHY related. + *--------------------------------------------------------------------------- + */ + /* Enable Config3.PARAM_En to revise AnaaParm. */ + write_nic_byte(dev, CR9346, 0xc0); /* enable config register write */ tmpu8 = read_nic_byte(dev, CONFIG3); write_nic_byte(dev, CONFIG3, (tmpu8 | CONFIG3_PARM_En)); - /* Turn on Analog power. */ - /* Asked for by William, otherwise, MAC 3-wire can't work, 2006.06.27, by rcnjko. */ + /* Turn on Analog power. */ + /* Asked for by William, otherwise, MAC 3-wire can't work, 2006.06.27, by rcnjko. */ write_nic_dword(dev, ANAPARAM2, ANAPARM2_ASIC_ON); write_nic_dword(dev, ANAPARAM, ANAPARM_ASIC_ON); write_nic_word(dev, ANAPARAM3, 0x0010); write_nic_byte(dev, CONFIG3, tmpu8); write_nic_byte(dev, CR9346, 0x00); - /* enable EEM0 and EEM1 in 9346CR */ + /* enable EEM0 and EEM1 in 9346CR */ btCR9346 = read_nic_byte(dev, CR9346); write_nic_byte(dev, CR9346, (btCR9346 | 0xC0)); - /* B cut use LED1 to control HW RF on/off */ + /* B cut use LED1 to control HW RF on/off */ TmpU1b = read_nic_byte(dev, CONFIG5); TmpU1b = TmpU1b & ~BIT3; write_nic_byte(dev, CONFIG5, TmpU1b); - /* disable EEM0 and EEM1 in 9346CR */ + /* disable EEM0 and EEM1 in 9346CR */ btCR9346 &= ~(0xC0); write_nic_byte(dev, CR9346, btCR9346); - /* Enable Led (suggested by Jong) */ - /* B-cut RF Radio on/off 5e[3]=0 */ + /* Enable Led (suggested by Jong) */ + /* B-cut RF Radio on/off 5e[3]=0 */ btPSR = read_nic_byte(dev, PSR); write_nic_byte(dev, PSR, (btPSR | BIT3)); - /* setup initial timing for RFE. */ + /* setup initial timing for RFE. */ write_nic_word(dev, RFPinsOutput, 0x0480); SetOutputEnableOfRfPins(dev); write_nic_word(dev, RFPinsSelect, 0x2488); - /* PHY config. */ + /* PHY config. */ PhyConfig8185(dev); /* - We assume RegWirelessMode has already been initialized before, - however, we has to validate the wireless mode here and provide a - reasonable initialized value if necessary. 2005.01.13, by rcnjko. - */ + * We assume RegWirelessMode has already been initialized before, + * however, we has to validate the wireless mode here and provide a + * reasonable initialized value if necessary. 2005.01.13, by rcnjko. + */ SupportedWirelessMode = GetSupportedWirelessMode8185(dev); if ((ieee->mode != WIRELESS_MODE_B) && (ieee->mode != WIRELESS_MODE_G) && (ieee->mode != WIRELESS_MODE_A) && - (ieee->mode != WIRELESS_MODE_AUTO)) { - /* It should be one of B, G, A, or AUTO. */ + (ieee->mode != WIRELESS_MODE_AUTO)) { + /* It should be one of B, G, A, or AUTO. */ bInvalidWirelessMode = 1; - } else { - /* One of B, G, A, or AUTO. */ - /* Check if the wireless mode is supported by RF. */ + } else { + /* One of B, G, A, or AUTO. */ + /* Check if the wireless mode is supported by RF. */ if ((ieee->mode != WIRELESS_MODE_AUTO) && - (ieee->mode & SupportedWirelessMode) == 0) { + (ieee->mode & SupportedWirelessMode) == 0) { bInvalidWirelessMode = 1; } } - if (bInvalidWirelessMode || ieee->mode == WIRELESS_MODE_AUTO) { - /* Auto or other invalid value. */ - /* Assigne a wireless mode to initialize. */ - if ((SupportedWirelessMode & WIRELESS_MODE_A)) { + if (bInvalidWirelessMode || ieee->mode == WIRELESS_MODE_AUTO) { + /* Auto or other invalid value. */ + /* Assigne a wireless mode to initialize. */ + if ((SupportedWirelessMode & WIRELESS_MODE_A)) { InitWirelessMode = WIRELESS_MODE_A; - } else if ((SupportedWirelessMode & WIRELESS_MODE_G)) { + } else if ((SupportedWirelessMode & WIRELESS_MODE_G)) { InitWirelessMode = WIRELESS_MODE_G; - } else if ((SupportedWirelessMode & WIRELESS_MODE_B)) { + } else if ((SupportedWirelessMode & WIRELESS_MODE_B)) { InitWirelessMode = WIRELESS_MODE_B; - } else { + } else { DMESGW("InitializeAdapter8185(): No valid wireless mode supported, SupportedWirelessMode(%x)!!!\n", SupportedWirelessMode); InitWirelessMode = WIRELESS_MODE_B; @@ -1690,24 +1554,21 @@ void rtl8185b_adapter_start(struct net_device *dev) if (bInvalidWirelessMode) ieee->mode = (WIRELESS_MODE)InitWirelessMode; - } else { - /* One of B, G, A. */ + } else { + /* One of B, G, A. */ InitWirelessMode = ieee->mode; } -/* by amy for power save */ priv->eRFPowerState = eRfOff; priv->RfOffReason = 0; { MgntActSet_RF_State(dev, eRfOn, 0); } /* - If inactive power mode is enabled, disable rf while in disconnected state. - */ + * If inactive power mode is enabled, disable rf while in disconnected state. + */ if (priv->bInactivePs) MgntActSet_RF_State(dev , eRfOff, RF_CHANGE_BY_IPS); -/* by amy for power save */ - ActSetWirelessMode8185(dev, (u8)(InitWirelessMode)); /* ----------------------------------------------------------------------------- */ @@ -1715,7 +1576,7 @@ void rtl8185b_adapter_start(struct net_device *dev) rtl8185b_irq_enable(dev); netif_start_queue(dev); - } +} void rtl8185b_rx_enable(struct net_device *dev) { @@ -1728,7 +1589,7 @@ void rtl8185b_rx_enable(struct net_device *dev) DMESG("NIC in promisc mode"); if (priv->ieee80211->iw_mode == IW_MODE_MONITOR || \ - dev->flags & IFF_PROMISC) { + dev->flags & IFF_PROMISC) { priv->ReceiveConfig = priv->ReceiveConfig & (~RCR_APM); priv->ReceiveConfig = priv->ReceiveConfig | RCR_AAP; } diff --git a/drivers/staging/rtl8192e/Kconfig b/drivers/staging/rtl8192e/Kconfig index f87e2110185..4602a47cdb4 100644 --- a/drivers/staging/rtl8192e/Kconfig +++ b/drivers/staging/rtl8192e/Kconfig @@ -14,6 +14,7 @@ if RTLLIB config RTLLIB_CRYPTO_CCMP tristate "Support for rtllib CCMP crypto" depends on RTLLIB + select CRYPTO_AES default y ---help--- CCMP crypto driver for rtllib. @@ -23,6 +24,8 @@ config RTLLIB_CRYPTO_CCMP config RTLLIB_CRYPTO_TKIP tristate "Support for rtllib TKIP crypto" depends on RTLLIB + select CRYPTO_ARC4 + select CRYPTO_MICHAEL_MIC default y ---help--- TKIP crypto driver for rtllib. @@ -31,6 +34,7 @@ config RTLLIB_CRYPTO_TKIP config RTLLIB_CRYPTO_WEP tristate "Support for rtllib WEP crypto" + select CRYPTO_ARC4 depends on RTLLIB default y ---help--- diff --git a/drivers/staging/rtl8192e/rtl8192e/r8192E_cmdpkt.c b/drivers/staging/rtl8192e/rtl8192e/r8192E_cmdpkt.c index 58d044ea552..ea91744f7cc 100644 --- a/drivers/staging/rtl8192e/rtl8192e/r8192E_cmdpkt.c +++ b/drivers/staging/rtl8192e/rtl8192e/r8192E_cmdpkt.c @@ -342,7 +342,6 @@ static void cmpk_handle_tx_rate_history(struct net_device *dev, u8 *pmsg) u32 cmpk_message_handle_rx(struct net_device *dev, struct rtllib_rx_stats *pstats) { - struct r8192_priv *priv = rtllib_priv(dev); int total_length; u8 cmd_length, exe_cnt = 0; u8 element_id; @@ -409,8 +408,6 @@ u32 cmpk_message_handle_rx(struct net_device *dev, return 1; } - priv->stats.rxcmdpkt[element_id]++; - total_length -= cmd_length; pcmd_buff += cmd_length; } diff --git a/drivers/staging/rtl8192e/rtl8192e/r8192E_firmware.c b/drivers/staging/rtl8192e/rtl8192e/r8192E_firmware.c index 37719859bda..b526fa42867 100644 --- a/drivers/staging/rtl8192e/rtl8192e/r8192E_firmware.c +++ b/drivers/staging/rtl8192e/rtl8192e/r8192E_firmware.c @@ -216,7 +216,7 @@ static bool firmware_check_ready(struct net_device *dev, break; default: rt_status = false; - RT_TRACE(COMP_FIRMWARE, "Unknown firware status"); + RT_TRACE(COMP_FIRMWARE, "Unknown firmware status"); break; } diff --git a/drivers/staging/rtl8192e/rtl8192e/r8192E_phy.c b/drivers/staging/rtl8192e/rtl8192e/r8192E_phy.c index 3e705efaaf2..9676c591c85 100644 --- a/drivers/staging/rtl8192e/rtl8192e/r8192E_phy.c +++ b/drivers/staging/rtl8192e/rtl8192e/r8192E_phy.c @@ -689,7 +689,7 @@ void rtl8192_phy_setTxPower(struct net_device *dev, u8 channel) case RF_8258: break; default: - RT_TRACE(COMP_ERR, "unknown rf chip in funtion %s()\n", + RT_TRACE(COMP_ERR, "unknown rf chip in function %s()\n", __func__); break; } diff --git a/drivers/staging/rtl8192e/rtl8192e/r819xE_phyreg.h b/drivers/staging/rtl8192e/rtl8192e/r819xE_phyreg.h index d5de279f664..970298b07af 100644 --- a/drivers/staging/rtl8192e/rtl8192e/r819xE_phyreg.h +++ b/drivers/staging/rtl8192e/rtl8192e/r819xE_phyreg.h @@ -306,7 +306,7 @@ #define bRFStart 0x0000f000 #define bBBStart 0x000000f0 #define bBBCCKStart 0x0000000f -/* Reg)x814 */ +/* Reg x814 */ #define bPAEnd 0xf #define bTREnd 0x0f000000 #define bRFEnd 0x000f0000 @@ -844,7 +844,7 @@ #define bRTL8258_RxLPFBW 0xc00 #define bRTL8258_RSSILPFBW 0xc0 -/* byte endable for sb_write */ +/* byte enable for sb_write */ #define bByte0 0x1 #define bByte1 0x2 #define bByte2 0x4 diff --git a/drivers/staging/rtl8192e/rtl8192e/rtl_core.c b/drivers/staging/rtl8192e/rtl8192e/rtl_core.c index 71adb6b3344..97a5f499d7c 100644 --- a/drivers/staging/rtl8192e/rtl8192e/rtl_core.c +++ b/drivers/staging/rtl8192e/rtl8192e/rtl_core.c @@ -1025,7 +1025,7 @@ static int rtl8192_sta_down(struct net_device *dev, bool shutdownrf) break; } RT_TRACE(COMP_DBG, "===>%s():RF is in progress, need to wait " - "until rf chang is done.\n", __func__); + "until rf change is done.\n", __func__); mdelay(1); RFInProgressTimeOut++; spin_lock_irqsave(&priv->rf_ps_lock, flags); @@ -1211,7 +1211,7 @@ static void rtl8192_init_priv_variable(struct net_device *dev) priv->AcmControl = 0; priv->pFirmware = vzalloc(sizeof(struct rt_firmware)); if (!priv->pFirmware) - printk(KERN_ERR "rtl8193e: Unable to allocate space " + printk(KERN_ERR "rtl8192e: Unable to allocate space " "for firmware\n"); skb_queue_head_init(&priv->rx_queue); diff --git a/drivers/staging/rtl8192e/rtl8192e/rtl_core.h b/drivers/staging/rtl8192e/rtl8192e/rtl_core.h index 2a2519cc284..320d5fc026b 100644 --- a/drivers/staging/rtl8192e/rtl8192e/rtl_core.h +++ b/drivers/staging/rtl8192e/rtl8192e/rtl_core.h @@ -353,7 +353,6 @@ struct rt_stats { unsigned long rxrdu; unsigned long rxok; unsigned long rxframgment; - unsigned long rxcmdpkt[8]; unsigned long rxurberr; unsigned long rxstaterr; unsigned long rxdatacrcerr; @@ -944,7 +943,7 @@ struct r8192_priv { bool bfsync_processing; u32 rate_record; u32 rateCountDiffRecord; - u32 ContiuneDiffCount; + u32 ContinueDiffCount; bool bswitch_fsync; u8 framesync; u32 framesyncC34; diff --git a/drivers/staging/rtl8192e/rtl8192e/rtl_dm.c b/drivers/staging/rtl8192e/rtl8192e/rtl_dm.c index f026b7171f6..481b1e4d491 100644 --- a/drivers/staging/rtl8192e/rtl8192e/rtl_dm.c +++ b/drivers/staging/rtl8192e/rtl8192e/rtl_dm.c @@ -493,7 +493,7 @@ static void dm_TXPowerTrackingCallback_TSSI(struct net_device *dev) if (priv->bResetInProgress) { RT_TRACE(COMP_POWER_TRACKING, - "we are in slient reset progress, so return\n"); + "we are in silent reset progress, so return\n"); write_nic_byte(dev, Pw_Track_Flag, 0); write_nic_byte(dev, FW_Busy_Flag, 0); return; @@ -2615,22 +2615,22 @@ void dm_fsync_timer_callback(unsigned long data) rate_count_diff; if (DiffNum >= priv->rtllib->fsync_seconddiff_ratethreshold) - priv->ContiuneDiffCount++; + priv->ContinueDiffCount++; else - priv->ContiuneDiffCount = 0; + priv->ContinueDiffCount = 0; - if (priv->ContiuneDiffCount >= 2) { + if (priv->ContinueDiffCount >= 2) { bSwitchFromCountDiff = true; - priv->ContiuneDiffCount = 0; + priv->ContinueDiffCount = 0; } } else { - priv->ContiuneDiffCount = 0; + priv->ContinueDiffCount = 0; } if (rate_count_diff <= priv->rtllib->fsync_firstdiff_ratethreshold) { bSwitchFromCountDiff = true; - priv->ContiuneDiffCount = 0; + priv->ContinueDiffCount = 0; } priv->rate_record = rate_count; priv->rateCountDiffRecord = rate_count_diff; @@ -2677,10 +2677,10 @@ void dm_fsync_timer_callback(unsigned long data) write_nic_byte(dev, 0xC36, 0x5c); write_nic_byte(dev, 0xC3e, 0x96); } - priv->ContiuneDiffCount = 0; + priv->ContinueDiffCount = 0; write_nic_dword(dev, rOFDM0_RxDetector2, 0x465c52cd); } - RT_TRACE(COMP_HALDM, "ContiuneDiffCount %d\n", priv->ContiuneDiffCount); + RT_TRACE(COMP_HALDM, "ContinueDiffCount %d\n", priv->ContinueDiffCount); RT_TRACE(COMP_HALDM, "rateRecord %d rateCount %d, rateCountdiff %d " "bSwitchFsync %d\n", priv->rate_record, rate_count, rate_count_diff, priv->bswitch_fsync); @@ -2723,7 +2723,7 @@ static void dm_EndSWFsync(struct net_device *dev) write_nic_byte(dev, 0xC3e, 0x96); } - priv->ContiuneDiffCount = 0; + priv->ContinueDiffCount = 0; write_nic_dword(dev, rOFDM0_RxDetector2, 0x465c52cd); } @@ -2735,7 +2735,7 @@ static void dm_StartSWFsync(struct net_device *dev) RT_TRACE(COMP_HALDM, "%s\n", __func__); priv->rate_record = 0; - priv->ContiuneDiffCount = 0; + priv->ContinueDiffCount = 0; priv->rateCountDiffRecord = 0; priv->bswitch_fsync = false; diff --git a/drivers/staging/rtl8192e/rtl8192e/rtl_wx.c b/drivers/staging/rtl8192e/rtl8192e/rtl_wx.c index 4e93669210a..778d7baf8e0 100644 --- a/drivers/staging/rtl8192e/rtl8192e/rtl_wx.c +++ b/drivers/staging/rtl8192e/rtl8192e/rtl_wx.c @@ -1322,9 +1322,9 @@ static struct iw_statistics *r8192_get_wireless_stats(struct net_device *dev) struct iw_handler_def r8192_wx_handlers_def = { .standard = r8192_wx_handlers, - .num_standard = sizeof(r8192_wx_handlers) / sizeof(iw_handler), + .num_standard = ARRAY_SIZE(r8192_wx_handlers), .private = r8192_private_handler, - .num_private = sizeof(r8192_private_handler) / sizeof(iw_handler), + .num_private = ARRAY_SIZE(r8192_private_handler), .num_private_args = sizeof(r8192_private_args) / sizeof(struct iw_priv_args), .get_wireless_stats = r8192_get_wireless_stats, diff --git a/drivers/staging/rtl8192e/rtllib.h b/drivers/staging/rtl8192e/rtllib.h index e26aec86a5c..d7460ae3a76 100644 --- a/drivers/staging/rtl8192e/rtllib.h +++ b/drivers/staging/rtl8192e/rtllib.h @@ -169,7 +169,7 @@ struct cb_desc { u8 nStuckCount; - /* Tx Firmware Relaged flags (10-11)*/ + /* Tx Firmware Related flags (10-11)*/ u8 bCTSEnable:1; u8 bRTSEnable:1; u8 bUseShortGI:1; @@ -1690,7 +1690,7 @@ enum rtllib_state { /* the association procedure is sending AUTH request*/ RTLLIB_ASSOCIATING_AUTHENTICATING, - /* the association procedure has successfully authentcated + /* the association procedure has successfully authenticated * and is sending association request */ RTLLIB_ASSOCIATING_AUTHENTICATED, @@ -2409,7 +2409,7 @@ struct rtllib_device { /* used instead of hard_start_xmit (not softmac_hard_start_xmit) * if the IEEE_SOFTMAC_TX_QUEUE feature is used to TX data - * frames. I the option IEEE_SOFTMAC_SINGLE_QUEUE is also set + * frames. If the option IEEE_SOFTMAC_SINGLE_QUEUE is also set * then also management frames are sent via this callback. * This function can't sleep. */ @@ -2422,12 +2422,12 @@ struct rtllib_device { */ void (*data_hard_stop)(struct net_device *dev); - /* OK this is complementar to data_poll_hard_stop */ + /* OK this is complementing to data_poll_hard_stop */ void (*data_hard_resume)(struct net_device *dev); /* ask to the driver to retune the radio . * This function can sleep. the driver should ensure - * the radio has been swithced before return. + * the radio has been switched before return. */ void (*set_chan)(struct net_device *dev, short ch); @@ -2438,7 +2438,7 @@ struct rtllib_device { * The syncro version is similar to the start_scan but * does not return until all channels has been scanned. * this is called in user context and should sleep, - * it is called in a work_queue when swithcing to ad-hoc mode + * it is called in a work_queue when switching to ad-hoc mode * or in behalf of iwlist scan when the card is associated * and root user ask for a scan. * the fucntion stop_scan should stop both the syncro and @@ -2481,7 +2481,7 @@ struct rtllib_device { struct rtllib_network *network); - /* check whether Tx hw resouce available */ + /* check whether Tx hw resource available */ short (*check_nic_enough_desc)(struct net_device *dev, int queue_index); short (*get_nic_desc_num)(struct net_device *dev, int queue_index); void (*SetBWModeHandler)(struct net_device *dev, @@ -2543,10 +2543,10 @@ struct rtllib_device { /* Generate probe requests */ #define IEEE_SOFTMAC_PROBERQ (1<<4) -/* Generate respones to probe requests */ +/* Generate response to probe requests */ #define IEEE_SOFTMAC_PROBERS (1<<5) -/* The ieee802.11 stack will manages the netif queue +/* The ieee802.11 stack will manage the netif queue * wake/stop for the driver, taking care of 802.11 * fragmentation. See softmac.c for details. */ #define IEEE_SOFTMAC_TX_QUEUE (1<<7) diff --git a/drivers/staging/rtl8192e/rtllib_rx.c b/drivers/staging/rtl8192e/rtllib_rx.c index 13979b5ea32..40a59c998ef 100644 --- a/drivers/staging/rtl8192e/rtllib_rx.c +++ b/drivers/staging/rtl8192e/rtllib_rx.c @@ -496,7 +496,7 @@ void rtllib_indicate_packets(struct rtllib_device *ieee, struct rtllib_rxb **prx memcpy(skb_push(sub_skb, ETH_ALEN), prxb->dst, ETH_ALEN); } - /* Indicat the packets to upper layer */ + /* Indicate the packets to upper layer */ if (sub_skb) { stats->rx_packets++; stats->rx_bytes += sub_skb->len; @@ -1233,7 +1233,7 @@ static void rtllib_rx_indicate_pkt_legacy(struct rtllib_device *ieee, if (is_multicast_ether_addr(dst)) ieee->stats.multicast++; - /* Indicat the packets to upper layer */ + /* Indicate the packets to upper layer */ memset(sub_skb->cb, 0, sizeof(sub_skb->cb)); sub_skb->protocol = eth_type_trans(sub_skb, dev); sub_skb->dev = dev; diff --git a/drivers/staging/rtl8192e/rtllib_softmac.c b/drivers/staging/rtl8192e/rtllib_softmac.c index c5a15dba1bf..a21b4d91a59 100644 --- a/drivers/staging/rtl8192e/rtllib_softmac.c +++ b/drivers/staging/rtl8192e/rtllib_softmac.c @@ -31,7 +31,7 @@ short rtllib_is_shortslot(const struct rtllib_network *net) return net->capability & WLAN_CAPABILITY_SHORT_SLOT_TIME; } -/* returns the total length needed for pleacing the RATE MFIE +/* returns the total length needed for placing the RATE MFIE * tag and the EXTENDED RATE MFIE tag if needed. * It encludes two bytes per tag for the tag itself and its len */ @@ -49,7 +49,7 @@ static unsigned int rtllib_MFIE_rate_len(struct rtllib_device *ieee) return rate_len; } -/* pleace the MFIE rate, tag to the memory (double) poined. +/* place the MFIE rate, tag to the memory (double) pointed. * Then it updates the pointer so that * it points after the new MFIE tag added. */ @@ -557,7 +557,7 @@ void rtllib_softmac_scan_syncro(struct rtllib_device *ieee, u8 is_mesh) * new network events, despite for updating the net list, * but we are temporarly 'unlinked' as the driver shall * not filter RX frames and the channel is changing. - * So the only situation in witch are interested is to check + * So the only situation in which are interested is to check * if the state become LINKED because of the #1 situation */ @@ -1681,7 +1681,7 @@ inline void rtllib_softmac_new_net(struct rtllib_device *ieee, /* if the user set the AP check if match. * if the network does not broadcast essid we check the - * user supplyed ANY essid + * user supplied ANY essid * if the network does broadcast and the user does not set * essid it is OK * if the network does broadcast and the user did set essid @@ -2444,16 +2444,16 @@ inline int rtllib_rx_frame_softmac(struct rtllib_device *ieee, /* following are for a simplier TX queue management. * Instead of using netif_[stop/wake]_queue the driver - * will uses these two function (plus a reset one), that - * will internally uses the kernel netif_* and takes + * will use these two functions (plus a reset one), that + * will internally use the kernel netif_* and takes * care of the ieee802.11 fragmentation. * So the driver receives a fragment per time and might - * call the stop function when it want without take care - * to have enought room to TX an entire packet. - * This might be useful if each fragment need it's own + * call the stop function when it wants to not + * have enough room to TX an entire packet. + * This might be useful if each fragment needs it's own * descriptor, thus just keep a total free memory > than - * the max fragmentation treshold is not enought.. If the - * ieee802.11 stack passed a TXB struct then you needed + * the max fragmentation threshold is not enough.. If the + * ieee802.11 stack passed a TXB struct then you need * to keep N free descriptors where * N = MAX_PACKET_SIZE / MIN_FRAG_TRESHOLD * In this way you need just one and the 802.11 stack @@ -2696,15 +2696,15 @@ static void rtllib_start_ibss_wq(void *data) rtllib_softmac_check_all_nets(ieee); - /* if not then the state is not linked. Maybe the user swithced to + /* if not then the state is not linked. Maybe the user switched to * ad-hoc mode just after being in monitor mode, or just after * being very few time in managed mode (so the card have had no * time to scan all the chans..) or we have just run up the iface * after setting ad-hoc mode. So we have to give another try.. * Here, in ibss mode, should be safe to do this without extra care - * (in bss mode we had to make sure no-one tryed to associate when + * (in bss mode we had to make sure no-one tried to associate when * we had just checked the ieee->state and we was going to start the - * scan) beacause in ibss mode the rtllib_new_net function, when + * scan) because in ibss mode the rtllib_new_net function, when * finds a good net, just set the ieee->state to RTLLIB_LINKED, * so, at worst, we waste a bit of time to initiate an unneeded syncro * scan, that will stop at the first round because it sees the state @@ -2819,7 +2819,7 @@ void rtllib_start_bss(struct rtllib_device *ieee) /* ensure no-one start an associating process (thus setting * the ieee->state to rtllib_ASSOCIATING) while we - * have just cheked it and we are going to enable scan. + * have just checked it and we are going to enable scan. * The rtllib_new_net function is always called with * lock held (from both rtllib_softmac_check_all_nets and * the rx path), so we cannot be in the middle of such function @@ -2872,7 +2872,7 @@ static void rtllib_associate_retry_wq(void *data) /* until we do not set the state to RTLLIB_NOLINK * there are no possibility to have someone else trying - * to start an association procdure (we get here with + * to start an association procedure (we get here with * ieee->state = RTLLIB_ASSOCIATING). * When we set the state to RTLLIB_NOLINK it is possible * that the RX path run an attempt to associate, but @@ -3679,8 +3679,7 @@ void rtllib_MlmeDisassociateRequest(struct rtllib_device *rtllib, u8 *asSta, RemovePeerTS(rtllib, asSta); - - if (memcpy(rtllib->current_network.bssid, asSta, 6) == NULL) { + if (memcmp(rtllib->current_network.bssid, asSta, 6) == 0) { rtllib->state = RTLLIB_NOLINK; for (i = 0; i < 6; i++) diff --git a/drivers/staging/rtl8192e/rtllib_softmac_wx.c b/drivers/staging/rtl8192e/rtllib_softmac_wx.c index 1523bc7a210..1bb6b52e0f2 100644 --- a/drivers/staging/rtl8192e/rtllib_softmac_wx.c +++ b/drivers/staging/rtl8192e/rtllib_softmac_wx.c @@ -479,7 +479,7 @@ int rtllib_wx_set_essid(struct rtllib_device *ieee, /* this is just to be sure that the GET wx callback - * has consisten infos. not needed otherwise + * has consistent infos. not needed otherwise */ spin_lock_irqsave(&ieee->lock, flags); @@ -575,7 +575,7 @@ int rtllib_wx_set_power(struct rtllib_device *ieee, if ((!ieee->sta_wake_up) || (!ieee->enter_sleep_state) || (!ieee->ps_is_queue_empty)) { - RTLLIB_DEBUG(RTLLIB_DL_ERR, "%s(): PS mode is tryied to be use " + RTLLIB_DEBUG(RTLLIB_DL_ERR, "%s(): PS mode is tried to be use " "but driver missed a callback\n\n", __func__); return -1; } diff --git a/drivers/staging/rtl8192e/rtllib_tx.c b/drivers/staging/rtl8192e/rtllib_tx.c index f451bfc27a8..f24aa00c533 100644 --- a/drivers/staging/rtl8192e/rtllib_tx.c +++ b/drivers/staging/rtl8192e/rtllib_tx.c @@ -59,7 +59,7 @@ 802.11 Data Frame -802.11 frame_contorl for data frames - 2 bytes +802.11 frame_control for data frames - 2 bytes ,-----------------------------------------------------------------------------------------. bits | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | a | b | c | d | e | |----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|------| @@ -576,7 +576,7 @@ int rtllib_xmit_inter(struct sk_buff *skb, struct net_device *dev) spin_lock_irqsave(&ieee->lock, flags); - /* If there is no driver handler to take the TXB, dont' bother + /* If there is no driver handler to take the TXB, don't bother * creating it... */ if ((!ieee->hard_start_xmit && !(ieee->softmac_features & IEEE_SOFTMAC_TX_QUEUE)) || @@ -738,7 +738,7 @@ int rtllib_xmit_inter(struct sk_buff *skb, struct net_device *dev) (CFG_RTLLIB_COMPUTE_FCS | CFG_RTLLIB_RESERVE_FCS)) bytes_per_frag -= RTLLIB_FCS_LEN; - /* Each fragment may need to have room for encryptiong + /* Each fragment may need to have room for encrypting * pre/postfix */ if (encrypt) { bytes_per_frag -= crypt->ops->extra_mpdu_prefix_len + diff --git a/drivers/staging/rtl8192e/rtllib_wx.c b/drivers/staging/rtl8192e/rtllib_wx.c index c27ff7edbaf..c7e8d4d8ec2 100644 --- a/drivers/staging/rtl8192e/rtllib_wx.c +++ b/drivers/staging/rtl8192e/rtllib_wx.c @@ -88,7 +88,7 @@ static inline char *rtl819x_translate_scan(struct rtllib_device *ieee, } /* Add the protocol name */ iwe.cmd = SIOCGIWNAME; - for (i = 0; i < (sizeof(rtllib_modes)/sizeof(rtllib_modes[0])); i++) { + for (i = 0; i < ARRAY_SIZE(rtllib_modes); i++) { if (network->mode&(1<<i)) { sprintf(pname, rtllib_modes[i].mode_string, rtllib_modes[i].mode_size); @@ -408,7 +408,7 @@ int rtllib_wx_set_encode(struct rtllib_device *ieee, (*crypt)->priv); sec.flags |= (1 << key); /* This ensures a key will be activated if no key is - * explicitely set */ + * explicitly set */ if (key == sec.active_key) sec.flags |= SEC_ACTIVE_KEY; ieee->crypt_info.tx_keyidx = key; diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_module.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_module.c index e3d47bcf4ca..82d4bf6a86a 100644 --- a/drivers/staging/rtl8192u/ieee80211/ieee80211_module.c +++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_module.c @@ -161,7 +161,7 @@ struct net_device *alloc_ieee80211(int sizeof_priv) if (ieee->pHTInfo == NULL) { IEEE80211_DEBUG(IEEE80211_DL_ERR, "can't alloc memory for HTInfo\n"); - return NULL; + goto failed; } HTUpdateDefaultSetting(ieee); HTInitializeHTInfo(ieee); //may move to other place. diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c index be2a28cf8ed..6249c3f160e 100644 --- a/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c +++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c @@ -671,7 +671,7 @@ void RxReorderIndicatePacket( struct ieee80211_device *ieee, index = 1; } else { /* Current packet is going to be inserted into pending list.*/ - //IEEE80211_DEBUG(IEEE80211_DL_REORDER,"%s(): We RX no ordered packed, insert to orderd list\n",__FUNCTION__); + //IEEE80211_DEBUG(IEEE80211_DL_REORDER,"%s(): We RX no ordered packed, insert to ordered list\n",__FUNCTION__); if(!list_empty(&ieee->RxReorder_Unused_List)) { pReorderEntry = (PRX_REORDER_ENTRY)list_entry(ieee->RxReorder_Unused_List.next,RX_REORDER_ENTRY,List); list_del_init(&pReorderEntry->List); diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c index c2ab5fa1546..f6ff8cff313 100644 --- a/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c +++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c @@ -2062,7 +2062,7 @@ ieee80211_rx_frame_softmac(struct ieee80211_device *ieee, struct sk_buff *skb, } }else{ ieee->softmac_stats.rx_auth_rs_err++; - IEEE80211_DEBUG_MGMT("Authentication respose status code 0x%x",errcode); + IEEE80211_DEBUG_MGMT("Authentication response status code 0x%x",errcode); ieee80211_associate_abort(ieee); } diff --git a/drivers/staging/rtl8192u/r8180_93cx6.c b/drivers/staging/rtl8192u/r8180_93cx6.c index 8878cfeb0fb..3c515b7bc54 100644 --- a/drivers/staging/rtl8192u/r8180_93cx6.c +++ b/drivers/staging/rtl8192u/r8180_93cx6.c @@ -14,7 +14,7 @@ Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver. - We want to tanks the Authors of those projects and the Ndiswrapper + We want to thank the Authors of those projects and the Ndiswrapper project Authors. */ diff --git a/drivers/staging/rtl8192u/r8180_93cx6.h b/drivers/staging/rtl8192u/r8180_93cx6.h index fb3ac9766ea..5cea51e1142 100644 --- a/drivers/staging/rtl8192u/r8180_93cx6.h +++ b/drivers/staging/rtl8192u/r8180_93cx6.h @@ -7,7 +7,7 @@ Parts of this driver are based on the rtl8180 driver skeleton from Patric Schenke & Andres Salomon Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver - We want to tanks the Authors of such projects and the Ndiswrapper project Authors. + We want to thank the Authors of such projects and the Ndiswrapper project Authors. */ /*This files contains card eeprom (93c46 or 93c56) programming routines*/ diff --git a/drivers/staging/rtl8192u/r8192U.h b/drivers/staging/rtl8192u/r8192U.h index 9b81f26d40f..57e3383cc93 100644 --- a/drivers/staging/rtl8192u/r8192U.h +++ b/drivers/staging/rtl8192u/r8192U.h @@ -11,7 +11,7 @@ Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver - We want to tanks the Authors of those projects and the Ndiswrapper + We want to thank the Authors of those projects and the Ndiswrapper project Authors. */ @@ -98,7 +98,7 @@ do { if(rt_global_debug_component & component) \ #define COMP_INIT BIT2 // during driver initialization / halt / reset. -#define COMP_RECV BIT3 // Reveive part data path. +#define COMP_RECV BIT3 // Receive data path. #define COMP_SEND BIT4 // Send part path. #define COMP_IO BIT5 // I/O Related. Added by Annie, 2006-03-02. #define COMP_POWER BIT6 // 802.11 Power Save mode or System/Device Power state related. @@ -322,7 +322,7 @@ typedef struct _tx_fwinfo_819x_usb { u8 TxSubCarrier:2; // This is used for legacy OFDM rate only. u8 STBC:2; u8 AllowAggregation:1; - u8 RtsHT:1; //Interpre RtsRate field as high throughput data rate + u8 RtsHT:1; //Interpret RtsRate field as high throughput data rate u8 RtsShort:1; //Short PLCP for CCK, or short GI for 11n MCS u8 RtsBandwidth:1; // This is used for HT MCS rate only. u8 RtsSubcarrier:2; // This is used for legacy OFDM rate only. @@ -610,7 +610,6 @@ typedef struct Stats // unsigned long rxnopointer; unsigned long rxok; unsigned long rxframgment; - unsigned long rxcmdpkt[4]; //08/05/08 amy rx cmd element txfeedback/bcn report/cfg set/query unsigned long rxurberr; unsigned long rxstaterr; unsigned long received_rate_histogram[4][32]; //0: Total, 1:OK, 2:CRC, 3:ICV, 2007 07 03 cosa @@ -1117,7 +1116,7 @@ typedef struct r8192_priv bool bfsync_processing; // 500ms Fsync timer is active or not u32 rate_record; u32 rateCountDiffRecord; - u32 ContiuneDiffCount; + u32 ContinueDiffCount; bool bswitch_fsync; u8 framesync; diff --git a/drivers/staging/rtl8192u/r8192U_core.c b/drivers/staging/rtl8192u/r8192U_core.c index 9c00865f302..5981d665832 100644 --- a/drivers/staging/rtl8192u/r8192U_core.c +++ b/drivers/staging/rtl8192u/r8192U_core.c @@ -203,7 +203,7 @@ static void rtl819x_set_channel_map(u8 channel_plan, struct r8192_priv* priv) { Dot11d_Init(ieee); ieee->bGlobalDomain = false; - //acturally 8225 & 8256 rf chip only support B,G,24N mode + //actually 8225 & 8256 rf chips only support B,G,24N mode if ((priv->rf_chip == RF_8225) || (priv->rf_chip == RF_8256)) { min_chan = 1; @@ -1103,7 +1103,7 @@ inline u16 rtl8192_rate2rate(short rate) } -/* The protype of rx_isr has changed since one verion of Linux Kernel */ +/* The prototype of rx_isr has changed since one version of Linux Kernel */ static void rtl8192_rx_isr(struct urb *urb) { struct sk_buff *skb = (struct sk_buff *) urb->context; @@ -1476,7 +1476,7 @@ static void rtl8192_tx_isr(struct urb *tx_urb) if(tcb_desc->queue_index != TXCMD_QUEUE) { if(tx_urb->status == 0) { dev->trans_start = jiffies; - // As act as station mode, destion shall be unicast address. + // Act as station mode, destination shall be unicast address. //priv->ieee80211->stats.tx_bytes+=(skb->len - priv->ieee80211->tx_headroom); //priv->ieee80211->stats.tx_packets++; priv->stats.txoktotal++; @@ -1522,13 +1522,13 @@ static void rtl8192_tx_isr(struct urb *tx_urb) else if ((skb_queue_len(&priv->ieee80211->skb_drv_aggQ[queue_index])!= 0)&&\ (!(priv->ieee80211->queue_stop))) { // Tx Driver Aggregation process - /* The driver will aggregation the packets according to the following stets + /* The driver will aggregation the packets according to the following stats * 1. check whether there's tx irq available, for it's a completion return * function, it should contain enough tx irq; - * 2. check pakcet type; + * 2. check packet type; * 3. initialize sendlist, check whether the to-be send packet no greater than 1 - * 4. aggregation the packets, and fill firmware info and tx desc to it, etc. - * 5. check whehter the packet could be sent, otherwise just insert to wait head + * 4. aggregates the packets, and fill firmware info and tx desc into it, etc. + * 5. check whether the packet could be sent, otherwise just insert into wait head * */ skb = skb_dequeue(&priv->ieee80211->skb_drv_aggQ[queue_index]); if(!check_nic_enough_desc(dev, queue_index)) { @@ -2447,7 +2447,7 @@ static int rtl8192_qos_handle_probe_response(struct r8192_priv *priv, return 0; } -/* handle manage frame frame beacon and probe response */ +/* handle and manage frame from beacon and probe response */ static int rtl8192_handle_beacon(struct net_device * dev, struct ieee80211_beacon * beacon, struct ieee80211_network * network) @@ -2625,7 +2625,7 @@ bool GetHalfNmodeSupportByAPs819xUsb(struct net_device* dev) void rtl8192_refresh_supportrate(struct r8192_priv* priv) { struct ieee80211_device* ieee = priv->ieee80211; - //we donot consider set support rate for ABG mode, only HT MCS rate is set here. + //we do not consider set support rate for ABG mode, only HT MCS rate is set here. if (ieee->mode == WIRELESS_MODE_N_24G || ieee->mode == WIRELESS_MODE_N_5G) { memcpy(ieee->Regdot11HTOperationalRateSet, ieee->RegHTSuppRateSet, 16); @@ -2780,10 +2780,10 @@ static void rtl8192_init_priv_variable(struct net_device* dev) priv->TransmitConfig = // TCR_DurProcMode | //for RTL8185B, duration setting by HW //? TCR_DISReqQsize | - (TCR_MXDMA_2048<<TCR_MXDMA_OFFSET)| // Max DMA Burst Size per Tx DMA Burst, 7: reservied. + (TCR_MXDMA_2048<<TCR_MXDMA_OFFSET)| // Max DMA Burst Size per Tx DMA Burst, 7: reserved. (priv->ShortRetryLimit<<TCR_SRL_OFFSET)| // Short retry limit (priv->LongRetryLimit<<TCR_LRL_OFFSET) | // Long retry limit - (false ? TCR_SAT: 0); // FALSE: HW provies PLCP length and LENGEXT, TURE: SW proiveds them + (false ? TCR_SAT: 0); // FALSE: HW provides PLCP length and LENGEXT, TRUE: SW provides them #ifdef TO_DO_LIST if(Adapter->bInHctTest) pHalData->ReceiveConfig = pHalData->CSMethod | @@ -3437,7 +3437,7 @@ if(Adapter->ResetProgress == RESET_TYPE_NORESET) { // User disable RF via registry. RT_TRACE((COMP_INIT|COMP_RF), DBG_LOUD, ("InitializeAdapter819xUsb(): Turn off RF for RegRfOff ----------\n")); MgntActSet_RF_State(Adapter, eRfOff, RF_CHANGE_BY_SW); - // Those action will be discard in MgntActSet_RF_State because off the same state + // Those actions will be discard in MgntActSet_RF_State because of the same state for(eRFPath = 0; eRFPath <pHalData->NumTotalRFPath; eRFPath++) PHY_SetRFReg(Adapter, (RF90_RADIO_PATH_E)eRFPath, 0x4, 0xC00, 0x0); } @@ -3458,7 +3458,7 @@ if(Adapter->ResetProgress == RESET_TYPE_NORESET) if(pHalData->eRFPowerState == eRfOff) { MgntActSet_RF_State(Adapter, eRfOff, pMgntInfo->RfOffReason); - // Those action will be discard in MgntActSet_RF_State because off the same state + // Those actions will be discard in MgntActSet_RF_State because of the same state for(eRFPath = 0; eRFPath <pHalData->NumTotalRFPath; eRFPath++) PHY_SetRFReg(Adapter, (RF90_RADIO_PATH_E)eRFPath, 0x4, 0xC00, 0x0); } @@ -3586,7 +3586,7 @@ TxCheckStuck(struct net_device *dev) //unsigned long flags; // - // Decide Stuch threshold according to current power save mode + // Decide such threshold according to current power save mode // // RT_TRACE(COMP_RESET, " ==> TxCheckStuck()\n"); @@ -3745,7 +3745,7 @@ rtl819x_ifcheck_resetornot(struct net_device *dev) // Driver should not check RX stuck in IBSS mode because it is required to // set Check BSSID in order to send beacon, however, if check BSSID is - // set, STA cannot hear any packet a all. Emily, 2008.04.12 + // set, STA cannot hear any packet at all. Emily, 2008.04.12 RxResetType = RxCheckStuck(dev); } if(TxResetType==RESET_TYPE_NORMAL || RxResetType==RESET_TYPE_NORMAL) @@ -3962,7 +3962,7 @@ RESET_START: up(&priv->wx_sem); RT_TRACE(COMP_RESET,"%s():<==========down process is finished\n",__FUNCTION__); //rtl8192_irq_disable(dev); - RT_TRACE(COMP_RESET,"%s():===========>start to up the driver\n",__FUNCTION__); + RT_TRACE(COMP_RESET,"%s():===========>start up the driver\n",__FUNCTION__); reset_status = _rtl8192_up(dev); RT_TRACE(COMP_RESET,"%s():<===========up process is finished\n",__FUNCTION__); @@ -4155,7 +4155,7 @@ extern void rtl819x_watchdog_wqcallback(struct work_struct *work) void watch_dog_timer_callback(unsigned long data) { struct r8192_priv *priv = ieee80211_priv((struct net_device *) data); - //printk("===============>watch_dog timer\n"); + //printk("===============>watch_dog timer\n"); queue_delayed_work(priv->priv_wq,&priv->watch_dog_wq, 0); mod_timer(&priv->watch_dog_timer, jiffies + MSECS(IEEE80211_WATCH_DOG_TIME)); } @@ -4170,7 +4170,7 @@ int _rtl8192_up(struct net_device *dev) init_status = rtl8192_adapter_start(dev); if(!init_status) { - RT_TRACE(COMP_ERR,"ERR!!! %s(): initialization is failed!\n", __FUNCTION__); + RT_TRACE(COMP_ERR,"ERR!!! %s(): initialization failed!\n", __FUNCTION__); priv->up=priv->ieee80211->ieee_up = 0; return -EAGAIN; } @@ -4256,7 +4256,7 @@ int rtl8192_down(struct net_device *dev) skb_queue_purge(&priv->ieee80211->skb_drv_aggQ [i]); } - //as cancel_delayed_work will del work->timer, so if work is not definedas struct delayed_work, it will corrupt + //as cancel_delayed_work will del work->timer, so if work is not defined as struct delayed_work, it will corrupt // flush_scheduled_work(); rtl8192_cancel_deferred_work(priv); deinit_hal_dm(dev); @@ -4516,7 +4516,7 @@ u8 HwRateToMRate90(bool bIsHT, u8 rate) /** * Function: UpdateRxPktTimeStamp - * Overview: Recored down the TSF time stamp when receiving a packet + * Overview: Record the TSF time stamp when receiving a packet * * Input: * PADAPTER Adapter @@ -4556,10 +4556,10 @@ long rtl819x_translate_todbm(u8 signal_strength_index )// 0-100 index. } -/* 2008/01/22 MH We can not delcare RSSI/EVM total value of sliding window to +/* 2008/01/22 MH We can not declare RSSI/EVM total value of sliding window to be a local static. Otherwise, it may increase when we return from S3/S4. The - value will be kept in memory or disk. We must delcare the value in adapter - and it will be reinitialized when return from S3/S4. */ + value will be kept in memory or disk. Declare the value in the adaptor + and it will be reinitialized when returned from S3/S4. */ void rtl8192_process_phyinfo(struct r8192_priv * priv,u8* buffer, struct ieee80211_rx_stats * pprevious_stats, struct ieee80211_rx_stats * pcurrent_stats) { bool bcheck = false; @@ -5091,8 +5091,8 @@ static void rtl8192_query_rxphystatus( tmp_rxevm = pofdm_buf->rxevm_X[i]; rx_evmX = (char)(tmp_rxevm); - // Do not use shift operation like "rx_evmX >>= 1" because the compilor of free build environment - // fill most significant bit to "zero" when doing shifting operation which may change a negative + // Do not use shift operation like "rx_evmX >>= 1" because the compiler of free build environment + // will set the most significant bit to "zero" when doing shifting operation which may change a negative // value to positive one, then the dbm value (which is supposed to be negative) is not correct anymore. rx_evmX /= 2; //dbm @@ -5171,7 +5171,7 @@ void TranslateRxSignalStuff819xUsb(struct sk_buff *skb, type = WLAN_FC_GET_TYPE(fc); praddr = hdr->addr1; - /* Check if the received packet is acceptabe. */ + /* Check if the received packet is acceptable. */ bpacket_match_bssid = ((IEEE80211_FTYPE_CTL != type) && (eqMacAddr(priv->ieee80211->current_network.bssid, (fc & IEEE80211_FCTL_TODS)? hdr->addr1 : (fc & IEEE80211_FCTL_FROMDS )? hdr->addr2 : hdr->addr3)) && (!pstats->bHwError) && (!pstats->bCRC)&& (!pstats->bICV)); @@ -5211,7 +5211,7 @@ void TranslateRxSignalStuff819xUsb(struct sk_buff *skb, /** * Function: UpdateReceivedRateHistogramStatistics -* Overview: Recored down the received data rate +* Overview: Record the received data rate * * Input: * struct net_device *dev @@ -5401,7 +5401,7 @@ void query_rxdesc_status(struct sk_buff *skb, struct ieee80211_rx_stats *stats, } #ifdef USB_RX_AGGREGATION_SUPPORT - /* for the rx aggregated sub frame, the redundant space truelly contained in the packet */ + /* for the rx aggregated sub frame, the redundant space truly contained in the packet */ if(bIsRxAggrSubframe) { skb_pull(skb, 8); } @@ -5480,7 +5480,7 @@ void rtl8192_rx_nomal(struct sk_buff* skb) PacketShiftBytes = GetRxPacketShiftBytes819xUsb(&stats, false); } #endif - /* Process the MPDU recevied */ + /* Process the MPDU received */ skb_trim(skb, skb->len - 4/*sCrcLng*/); rx_pkt_len = skb->len; @@ -5538,7 +5538,7 @@ void rtl8192_rx_nomal(struct sk_buff* skb) if(PacketLength > agg_skb->len) { break; } - /* Process the MPDU recevied */ + /* Process the MPDU received */ skb = dev_alloc_skb(PacketLength); memcpy(skb_put(skb,PacketLength),agg_skb->data, PacketLength); skb_trim(skb, skb->len - 4/*sCrcLng*/); diff --git a/drivers/staging/rtl8192u/r8192U_dm.c b/drivers/staging/rtl8192u/r8192U_dm.c index 2dde9fa5c21..cd8dc85e9c0 100644 --- a/drivers/staging/rtl8192u/r8192U_dm.c +++ b/drivers/staging/rtl8192u/r8192U_dm.c @@ -38,7 +38,7 @@ static u32 edca_setting_UL[HT_IOT_PEER_MAX] = /*------------------------Define global variable-----------------------------*/ // Debug variable ? dig_t dm_digtable; -// Store current shoftware write register content for MAC PHY. +// Store current software write register content for MAC PHY. u8 dm_shadow[16][256] = {{0}}; // For Dynamic Rx Path Selection by Signal Strength DRxPathSel DM_RxPathSelTable; @@ -119,7 +119,7 @@ static void dm_pd_th(struct net_device *dev); static void dm_cs_ratio(struct net_device *dev); static void dm_init_ctstoself(struct net_device *dev); -// DM --> EDCA turboe mode control +// DM --> EDCA turbo mode control static void dm_check_edca_turbo(struct net_device *dev); // DM --> HW RF control @@ -348,7 +348,7 @@ extern void init_rate_adaptive(struct net_device * dev) * * Revised History: * When Who Remark - * 05/26/08 amy Create version 0 proting from windows code. + * 05/26/08 amy Create version 0 porting from windows code. * *---------------------------------------------------------------------------*/ static void dm_check_rate_adaptive(struct net_device * dev) @@ -543,7 +543,7 @@ static u32 OFDMSwingTable[OFDM_Table_Length] = { 0x5a400169, // 3, +3db 0x50800142, // 4, +2db 0x47c0011f, // 5, +1db - 0x40000100, // 6, +0db ===> default, upper for higher temprature, lower for low temprature + 0x40000100, // 6, +0db ===> default, upper for higher temperature, lower for low temperature 0x390000e4, // 7, -1db 0x32c000cb, // 8, -2db 0x2d4000b5, // 9, -3db @@ -678,7 +678,7 @@ static void dm_TXPowerTrackingCallback_TSSI(struct net_device * dev) { write_nic_byte(dev, 0x1ba, 0); viviflag = FALSE; - RT_TRACE(COMP_POWER_TRACKING, "we filted this data\n"); + RT_TRACE(COMP_POWER_TRACKING, "we filtered the data\n"); for(k = 0;k < 5; k++) tmp_report[k] = 0; break; @@ -864,14 +864,14 @@ static void dm_TXPowerTrackingCallback_ThermalMeter(struct net_device * dev) RT_TRACE(COMP_POWER_TRACKING, "Readback ThermalMeterA = %d \n", tmpRegA); if(tmpRegA < 3 || tmpRegA > 13) return; - if(tmpRegA >= 12) // if over 12, TP will be bad when high temprature + if(tmpRegA >= 12) // if over 12, TP will be bad when high temperature tmpRegA = 12; RT_TRACE(COMP_POWER_TRACKING, "Valid ThermalMeterA = %d \n", tmpRegA); priv->ThermalMeter[0] = ThermalMeterVal; //We use fixed value by Bryant's suggestion priv->ThermalMeter[1] = ThermalMeterVal; //We use fixed value by Bryant's suggestion - //Get current RF-A temprature index - if(priv->ThermalMeter[0] >= (u8)tmpRegA) //lower temprature + //Get current RF-A temperature index + if(priv->ThermalMeter[0] >= (u8)tmpRegA) //lower temperature { tmpOFDMindex = tmpCCK20Mindex = 6+(priv->ThermalMeter[0]-(u8)tmpRegA); tmpCCK40Mindex = tmpCCK20Mindex - 6; @@ -885,7 +885,7 @@ static void dm_TXPowerTrackingCallback_ThermalMeter(struct net_device * dev) else { tmpval = ((u8)tmpRegA - priv->ThermalMeter[0]); - if(tmpval >= 6) // higher temprature + if(tmpval >= 6) // higher temperature tmpOFDMindex = tmpCCK20Mindex = 0; // max to +6dB else tmpOFDMindex = tmpCCK20Mindex = 6 - tmpval; @@ -1457,9 +1457,9 @@ static void dm_InitializeTXPowerTracking_ThermalMeter(struct net_device *dev) { struct r8192_priv *priv = ieee80211_priv(dev); - // Tx Power tracking by Theremal Meter require Firmware R/W 3-wire. This mechanism + // Tx Power tracking by Thermal Meter requires Firmware R/W 3-wire. This mechanism // can be enabled only when Firmware R/W 3-wire is enabled. Otherwise, frequent r/w - // 3-wire by driver cause RF goes into wrong state. + // 3-wire by driver causes RF to go into a wrong state. if(priv->ieee80211->FwRWRF) priv->btxpower_tracking = TRUE; else @@ -1520,7 +1520,7 @@ static void dm_CheckTXPowerTracking_ThermalMeter(struct net_device *dev) if(!TM_Trigger) { - //Attention!! You have to wirte all 12bits data to RF, or it may cause RF to crash + //Attention!! You have to write all 12bits of data to RF, or it may cause RF to crash //actually write reg0x02 bit1=0, then bit1=1. //DbgPrint("Trigger ThermalMeter, write RF reg0x2 = 0x4d to 0x4f\n"); rtl8192_phy_SetRFReg(dev, RF90_PATH_A, 0x02, bMask12Bits, 0x4d); @@ -1744,7 +1744,7 @@ extern void dm_restore_dynamic_mechanism_state(struct net_device *dev) write_nic_dword(dev, RATR0, ratr_value); write_nic_byte(dev, UFWP, 1); } - //Resore TX Power Tracking Index + //Restore TX Power Tracking Index if(priv->btxpower_trackingInit && priv->btxpower_tracking){ dm_txpower_reset_recovery(dev); } @@ -2031,7 +2031,7 @@ static void dm_dig_init(struct net_device *dev) dm_digtable.dbg_mode = DM_DBG_OFF; //off=by real rssi value, on=by DM_DigTable.Rssi_val for new dig dm_digtable.dig_algorithm_switch = 0; - /* 2007/10/04 MH Define init gain threshol. */ + /* 2007/10/04 MH Define init gain threshold. */ dm_digtable.dig_state = DM_STA_DIG_MAX; dm_digtable.dig_highpwr_state = DM_STA_DIG_MAX; dm_digtable.initialgain_lowerbound_state = false; @@ -2097,7 +2097,7 @@ static void dm_ctrl_initgain_byrssi_by_driverrssi( return; //DbgPrint("Dig by Sw Rssi \n"); - if(dm_digtable.dig_algorithm_switch) // if swithed algorithm, we have to disable FW Dig. + if(dm_digtable.dig_algorithm_switch) // if switched algorithm, we have to disable FW Dig. fw_dig = 0; if(fw_dig <= 3) // execute several times to make sure the FW Dig is disabled {// FW DIG Off @@ -2160,8 +2160,8 @@ static void dm_ctrl_initgain_byrssi_by_fwfalse_alarm( /*DbgPrint("DIG Check\n\r RSSI=%d LOW=%d HIGH=%d STATE=%d", pHalData->UndecoratedSmoothedPWDB, DM_DigTable.RssiLowThresh, DM_DigTable.RssiHighThresh, DM_DigTable.Dig_State);*/ - /* 1. When RSSI decrease, We have to judge if it is smaller than a treshold - and then execute below step. */ + /* 1. When RSSI decrease, We have to judge if it is smaller than a threshold + and then execute the step below. */ if ((priv->undecorated_smoothed_pwdb <= dm_digtable.rssi_low_thresh)) { /* 2008/02/05 MH When we execute silent reset, the DIG PHY parameters @@ -2220,8 +2220,8 @@ static void dm_ctrl_initgain_byrssi_by_fwfalse_alarm( } - /* 2. When RSSI increase, We have to judge if it is larger than a treshold - and then execute below step. */ + /* 2. When RSSI increase, We have to judge if it is larger than a threshold + and then execute the step below. */ if ((priv->undecorated_smoothed_pwdb >= dm_digtable.rssi_high_thresh) ) { u8 reset_flag = 0; @@ -2329,7 +2329,7 @@ static void dm_ctrl_initgain_byrssi_highpwr( } /* 3. When RSSI >75% or <70%, it is a high power issue. We have to judge if - it is larger than a treshold and then execute below step. */ + it is larger than a threshold and then execute the step below. */ // 2008/02/05 MH SD3-Jerry Modify PD_TH for high power issue. if (priv->undecorated_smoothed_pwdb >= dm_digtable.rssi_high_power_highthresh) { @@ -2841,8 +2841,8 @@ static void dm_check_rfctrl_gpio(struct net_device * dev) { //struct r8192_priv *priv = ieee80211_priv(dev); - // Walk around for DTM test, we will not enable HW - radio on/off because r/w - // page 1 register before Lextra bus is enabled cause system fails when resuming + // Work around for DTM test, we will not enable HW - radio on/off because r/w + // page 1 register before extra bus is enabled causing system failures when resuming // from S4. 20080218, Emily // Stop to execute workitem to prevent S3/S4 bug. @@ -3377,30 +3377,30 @@ extern void dm_fsync_timer_callback(unsigned long data) { u32 DiffNum = priv->rateCountDiffRecord - rate_count_diff; - // Contiune count + // Continue count if(DiffNum >= priv->ieee80211->fsync_seconddiff_ratethreshold) - priv->ContiuneDiffCount++; + priv->ContinueDiffCount++; else - priv->ContiuneDiffCount = 0; + priv->ContinueDiffCount = 0; - // Contiune count over - if(priv->ContiuneDiffCount >=2) + // Continue count over + if(priv->ContinueDiffCount >=2) { bSwitchFromCountDiff = true; - priv->ContiuneDiffCount = 0; + priv->ContinueDiffCount = 0; } } else { - // Stop contiune count - priv->ContiuneDiffCount = 0; + // Stop the continued count + priv->ContinueDiffCount = 0; } //If Count diff <= FsyncRateCountThreshold if(rate_count_diff <= priv->ieee80211->fsync_firstdiff_ratethreshold) { bSwitchFromCountDiff = true; - priv->ContiuneDiffCount = 0; + priv->ContinueDiffCount = 0; } priv->rate_record = rate_count; priv->rateCountDiffRecord = rate_count_diff; @@ -3468,14 +3468,14 @@ extern void dm_fsync_timer_callback(unsigned long data) #endif write_nic_byte(dev, 0xC3e, 0x96); } - priv->ContiuneDiffCount = 0; + priv->ContinueDiffCount = 0; #ifdef RTL8190P write_nic_dword(dev, rOFDM0_RxDetector2, 0x164052cd); #else write_nic_dword(dev, rOFDM0_RxDetector2, 0x465c52cd); #endif } - RT_TRACE(COMP_HALDM, "ContiuneDiffCount %d\n", priv->ContiuneDiffCount); + RT_TRACE(COMP_HALDM, "ContinueDiffCount %d\n", priv->ContinueDiffCount); RT_TRACE(COMP_HALDM, "rateRecord %d rateCount %d, rateCountdiff %d bSwitchFsync %d\n", priv->rate_record, rate_count, rate_count_diff , priv->bswitch_fsync); } @@ -3507,7 +3507,7 @@ static void dm_EndSWFsync(struct net_device *dev) write_nic_byte(dev, 0xC3e, 0x96); } - priv->ContiuneDiffCount = 0; + priv->ContinueDiffCount = 0; #ifndef RTL8190P write_nic_dword(dev, rOFDM0_RxDetector2, 0x465c52cd); #endif @@ -3523,8 +3523,8 @@ static void dm_StartSWFsync(struct net_device *dev) RT_TRACE(COMP_HALDM,"%s\n", __FUNCTION__); // Initial rate record to zero, start to record. priv->rate_record = 0; - // Initial contiune diff count to zero, start to record. - priv->ContiuneDiffCount = 0; + // Initialize continue diff count to zero, start to record. + priv->ContinueDiffCount = 0; priv->rateCountDiffRecord = 0; priv->bswitch_fsync = false; @@ -3875,7 +3875,7 @@ static void dm_send_rssi_tofw(struct net_device *dev) // If we test chariot, we should stop the TX command ? // Because 92E will always silent reset when we send tx command. We use register - // 0x1e0(byte) to botify driver. + // 0x1e0(byte) to notify driver. write_nic_byte(dev, DRIVER_RSSI, (u8)priv->undecorated_smoothed_pwdb); return; tx_cmd.Op = TXCMD_SET_RX_RSSI; diff --git a/drivers/staging/rtl8192u/r8192U_hw.h b/drivers/staging/rtl8192u/r8192U_hw.h index e89aaf70143..1bfe871dcfb 100644 --- a/drivers/staging/rtl8192u/r8192U_hw.h +++ b/drivers/staging/rtl8192u/r8192U_hw.h @@ -10,7 +10,7 @@ Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver. - We want to tanks the Authors of those projects + We want to thank the Authors of those projects and the Ndiswrapper project Authors. */ diff --git a/drivers/staging/rtl8192u/r8192U_wx.c b/drivers/staging/rtl8192u/r8192U_wx.c index f6408f98ede..71f2d2349c3 100644 --- a/drivers/staging/rtl8192u/r8192U_wx.c +++ b/drivers/staging/rtl8192u/r8192U_wx.c @@ -13,7 +13,7 @@ Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver. - We want to tanks the Authors of those projects and the Ndiswrapper + We want to thank the Authors of those projects and the Ndiswrapper project Authors. */ @@ -256,7 +256,7 @@ static int r8192_wx_get_ap_status(struct net_device *dev, //count the length of input ssid for(name_len=0 ; ((char*)wrqu->data.pointer)[name_len]!='\0' ; name_len++); - //search for the correspoding info which is received + //search for the corresponding info which is received list_for_each_entry(target, &ieee->network_list, list) { if ( (target->ssid_len == name_len) && (strncmp(target->ssid, (char*)wrqu->data.pointer, name_len)==0)){ @@ -419,7 +419,7 @@ static int rtl8180_wx_get_range(struct net_device *dev, range->max_qual.updated = 7; /* Updated all three */ range->avg_qual.qual = 92; /* > 8% missed beacons is 'bad' */ - /* TODO: Find real 'good' to 'bad' threshol value for RSSI */ + /* TODO: Find real 'good' to 'bad' threshold value for RSSI */ range->avg_qual.level = 20 + -98; range->avg_qual.noise = 0; range->avg_qual.updated = 7; /* Updated all three */ @@ -1047,7 +1047,7 @@ static iw_handler r8192_wx_handlers[] = #else NULL, #endif - dummy, /* SIOCGIWAPLIST -- depricated */ + dummy, /* SIOCGIWAPLIST -- deprecated */ r8192_wx_set_scan, /* SIOCSIWSCAN */ r8192_wx_get_scan, /* SIOCGIWSCAN */ r8192_wx_set_essid, /* SIOCSIWESSID */ @@ -1211,9 +1211,9 @@ struct iw_statistics *r8192_get_wireless_stats(struct net_device *dev) struct iw_handler_def r8192_wx_handlers_def={ .standard = r8192_wx_handlers, - .num_standard = sizeof(r8192_wx_handlers) / sizeof(iw_handler), + .num_standard = ARRAY_SIZE(r8192_wx_handlers), .private = r8192_private_handler, - .num_private = sizeof(r8192_private_handler) / sizeof(iw_handler), + .num_private = ARRAY_SIZE(r8192_private_handler), .num_private_args = sizeof(r8192_private_args) / sizeof(struct iw_priv_args), #if WIRELESS_EXT >= 17 .get_wireless_stats = r8192_get_wireless_stats, diff --git a/drivers/staging/rtl8192u/r8192U_wx.h b/drivers/staging/rtl8192u/r8192U_wx.h index f4cf2801136..9f6b1050542 100644 --- a/drivers/staging/rtl8192u/r8192U_wx.h +++ b/drivers/staging/rtl8192u/r8192U_wx.h @@ -7,7 +7,7 @@ Parts of this driver are based on the rtl8180 driver skeleton from Patric Schenke & Andres Salomon Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver - We want to tanks the Authors of such projects and the Ndiswrapper project Authors. + We want to thank the Authors of such projects and the Ndiswrapper project Authors. */ /* this file (will) contains wireless extension handlers*/ diff --git a/drivers/staging/rtl8192u/r819xU_HTType.h b/drivers/staging/rtl8192u/r819xU_HTType.h index 2ac421626e7..e07f8b17a0d 100644 --- a/drivers/staging/rtl8192u/r819xU_HTType.h +++ b/drivers/staging/rtl8192u/r819xU_HTType.h @@ -211,7 +211,7 @@ typedef struct _RT_HIGH_THROUGHPUT{ u8 bEnableHT; u8 bCurrentHTSupport; - u8 bRegBW40MHz; // Tx 40MHz channel capablity + u8 bRegBW40MHz; // Tx 40MHz channel capability u8 bCurBW40MHz; // Tx 40MHz channel capability u8 bRegShortGI40MHz; // Tx Short GI for 40Mhz diff --git a/drivers/staging/rtl8192u/r819xU_cmdpkt.c b/drivers/staging/rtl8192u/r819xU_cmdpkt.c index 0cb28c776c4..a8a6dc2c365 100644 --- a/drivers/staging/rtl8192u/r819xU_cmdpkt.c +++ b/drivers/staging/rtl8192u/r819xU_cmdpkt.c @@ -157,7 +157,7 @@ SendTxCommandPacket( seg_ptr = skb_put(skb, buffer_len); /* * Transform from little endian to big endian - * and pending zero + * and pending zero */ memcpy(seg_ptr,codevirtualaddress,buffer_len); tcb_desc->txbuf_size= (u16)buffer_len; @@ -697,7 +697,6 @@ cmpk_message_handle_rx( struct ieee80211_rx_stats *pstats) { // u32 debug_level = DBG_LOUD; - struct r8192_priv *priv = ieee80211_priv(dev); int total_length; u8 cmd_length, exe_cnt = 0; u8 element_id; @@ -719,15 +718,15 @@ cmpk_message_handle_rx( /* 2. Read virtual address from RFD. */ pcmd_buff = pstats->virtual_address; - /* 3. Read command pakcet element id and length. */ + /* 3. Read command packet element id and length. */ element_id = pcmd_buff[0]; /*RT_TRACE(COMP_SEND, DebugLevel, ("\n\r[CMPK]-->element ID=%d Len=%d", element_id, total_length));*/ - /* 4. Check every received command packet conent according to different + /* 4. Check every received command packet content according to different element type. Because FW may aggregate RX command packet to minimize transmit time between DRV and FW.*/ - // Add a counter to prevent to locked in the loop too long + // Add a counter to prevent the lock in the loop from being held too long while (total_length > 0 || exe_cnt++ >100) { /* 2007/01/17 MH We support aggregation of different cmd in the same packet. */ @@ -779,9 +778,6 @@ cmpk_message_handle_rx( // 2007/01/22 MH Add to display tx statistic. //cmpk_DisplayTxStatistic(pAdapter); - /* 2007/03/09 MH Collect sidderent cmd element pkt num. */ - priv->stats.rxcmdpkt[element_id]++; - total_length -= cmd_length; pcmd_buff += cmd_length; } /* while (total_length > 0) */ diff --git a/drivers/staging/rtl8192u/r819xU_firmware.c b/drivers/staging/rtl8192u/r819xU_firmware.c index 4bb5fffca5b..b12d1907979 100644 --- a/drivers/staging/rtl8192u/r819xU_firmware.c +++ b/drivers/staging/rtl8192u/r819xU_firmware.c @@ -275,11 +275,11 @@ bool init_firmware(struct net_device *dev) /* * Download boot, main, and data image for System reset. - * Download data image for firmware reseta + * Download data image for firmware reset */ for(init_step = starting_state; init_step <= FW_INIT_STEP2_DATA; init_step++) { /* - * Open Image file, and map file to contineous memory if open file success. + * Open image file, and map file to continuous memory if open file success. * or read image file from array. Default load from IMG file */ if(rst_opt == OPT_SYSTEM_RESET) { diff --git a/drivers/staging/rtl8192u/r819xU_phy.c b/drivers/staging/rtl8192u/r819xU_phy.c index c4586b0817d..dd1954daea2 100644 --- a/drivers/staging/rtl8192u/r819xU_phy.c +++ b/drivers/staging/rtl8192u/r819xU_phy.c @@ -40,7 +40,7 @@ static u32 RF_CHANNEL_TABLE_ZEBRA[] = { * and do register read/write * input: u32 dwBitMask //taget bit pos in the addr to be modified * output: none - * return: u32 return the shift bit bit position of the mask + * return: u32 return the shift bit position of the mask * ****************************************************************************/ u32 rtl8192_CalculateBitShift(u32 dwBitMask) { @@ -176,7 +176,7 @@ u32 rtl8192_phy_RFSerialRead(struct net_device* dev, RF90_RADIO_PATH_E eRFPath, rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2, bLSSIReadEdge, 0x1); - // TODO: we should not delay such a long time. Ask help from SD3 + // TODO: we should not delay such a long time. Ask for help from SD3 msleep(1); ret = rtl8192_QueryBBReg(dev, pPhyReg->rfLSSIReadBack, bLSSIReadBackData); @@ -252,7 +252,7 @@ void rtl8192_phy_RFSerialWrite(struct net_device* dev, RF90_RADIO_PATH_E eRFPath NewOffset = Offset; } - // Put write addr in [5:0] and write data in [31:16] + // Put write addr in [5:0] and write data in [31:16] DataAndAddr = (Data<<16) | (NewOffset&0x3f); // Write Operation @@ -525,7 +525,7 @@ void rtl8192_phy_configmac(struct net_device* dev) } /****************************************************************************** - *function: This function do dirty work + *function: This function does dirty work * input: dev * output: none * return: none @@ -578,7 +578,7 @@ void rtl8192_phyConfigBB(struct net_device* dev, u8 ConfigType) void rtl8192_InitBBRFRegDef(struct net_device* dev) { struct r8192_priv *priv = ieee80211_priv(dev); -// RF Interface Sowrtware Control +// RF Interface Software Control priv->PHYRegDef[RF90_PATH_A].rfintfs = rFPGA0_XAB_RFInterfaceSW; // 16 LSBs if read 32-bit from 0x870 priv->PHYRegDef[RF90_PATH_B].rfintfs = rFPGA0_XAB_RFInterfaceSW; // 16 MSBs if read 32-bit from 0x870 (16-bit for 0x872) priv->PHYRegDef[RF90_PATH_C].rfintfs = rFPGA0_XCD_RFInterfaceSW;// 16 LSBs if read 32-bit from 0x874 @@ -602,7 +602,7 @@ void rtl8192_InitBBRFRegDef(struct net_device* dev) priv->PHYRegDef[RF90_PATH_C].rfintfe = rFPGA0_XC_RFInterfaceOE;// 16 MSBs if read 32-bit from 0x86A (16-bit for 0x86A) priv->PHYRegDef[RF90_PATH_D].rfintfe = rFPGA0_XD_RFInterfaceOE;// 16 MSBs if read 32-bit from 0x86C (16-bit for 0x86E) - //Addr of LSSI. Wirte RF register by driver + //Addr of LSSI. Write RF register by driver priv->PHYRegDef[RF90_PATH_A].rf3wireOffset = rFPGA0_XA_LSSIParameter; //LSSI Parameter priv->PHYRegDef[RF90_PATH_B].rf3wireOffset = rFPGA0_XB_LSSIParameter; priv->PHYRegDef[RF90_PATH_C].rf3wireOffset = rFPGA0_XC_LSSIParameter; @@ -1384,7 +1384,7 @@ u8 rtl8192_phy_SwChnlStepByStep(struct net_device *dev, u8 channel, u8* stage, u } /****************************************************************************** - *function: This function does acturally set channel work + *function: This function does actually set channel work * input: struct net_device *dev * u8 channel * output: none @@ -1425,7 +1425,7 @@ void rtl8192_SwChnl_WorkItem(struct net_device *dev) } /****************************************************************************** - *function: This function scheduled actural workitem to set channel + *function: This function scheduled actual work item to set channel * input: net_device dev * u8 channel //channel to set * output: none diff --git a/drivers/staging/rtl8192u/r819xU_phyreg.h b/drivers/staging/rtl8192u/r819xU_phyreg.h index 06b0b539e1b..50f24dce8b1 100644 --- a/drivers/staging/rtl8192u/r819xU_phyreg.h +++ b/drivers/staging/rtl8192u/r819xU_phyreg.h @@ -443,7 +443,7 @@ #define bCCKRxIG 0x7f00 #define bCCKLNAPolarity 0x800000 #define bCCKRx1stGain 0x7f0000 -#define bCCKRFExtend 0x20000000 //CCK Rx Iinital gain polarity +#define bCCKRFExtend 0x20000000 //CCK Rx inital gain polarity #define bCCKRxAGCSatLevel 0x1f000000 #define bCCKRxAGCSatCount 0xe0 #define bCCKRxRFSettle 0x1f //AGCsamp_dly diff --git a/drivers/staging/rtl8712/osdep_service.h b/drivers/staging/rtl8712/osdep_service.h index 9ba603310fd..cabf7747390 100644 --- a/drivers/staging/rtl8712/osdep_service.h +++ b/drivers/staging/rtl8712/osdep_service.h @@ -29,7 +29,6 @@ #define _SUCCESS 1 #define _FAIL 0 -#include <linux/version.h> #include <linux/spinlock.h> #include <linux/interrupt.h> diff --git a/drivers/staging/rtl8712/rtl871x_ioctl_linux.c b/drivers/staging/rtl8712/rtl871x_ioctl_linux.c index ef35bc29a3f..3b23befd364 100644 --- a/drivers/staging/rtl8712/rtl871x_ioctl_linux.c +++ b/drivers/staging/rtl8712/rtl871x_ioctl_linux.c @@ -43,7 +43,6 @@ #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> -#include <linux/version.h> #include <linux/io.h> #include <linux/semaphore.h> #include <net/iw_handler.h> @@ -2389,10 +2388,10 @@ static struct iw_statistics *r871x_get_wireless_stats(struct net_device *dev) struct iw_handler_def r871x_handlers_def = { .standard = r8711_handlers, - .num_standard = sizeof(r8711_handlers) / sizeof(iw_handler), + .num_standard = ARRAY_SIZE(r8711_handlers), .private = r8711_private_handler, .private_args = (struct iw_priv_args *)r8711_private_args, - .num_private = sizeof(r8711_private_handler) / sizeof(iw_handler), + .num_private = ARRAY_SIZE(r8711_private_handler), .num_private_args = sizeof(r8711_private_args) / sizeof(struct iw_priv_args), .get_wireless_stats = r871x_get_wireless_stats diff --git a/drivers/staging/rts5139/ms.c b/drivers/staging/rts5139/ms.c index b0e9071c8e5..02aad2d242c 100644 --- a/drivers/staging/rts5139/ms.c +++ b/drivers/staging/rts5139/ms.c @@ -3864,7 +3864,7 @@ static int ms_rw_multi_sector(struct scsi_cmnd *srb, struct rts51x_chip *chip, log_blk = (u16) (start_sector >> ms_card->block_shift); start_page = (u8) (start_sector & ms_card->page_off); - for (seg_no = 0; seg_no < sizeof(ms_start_idx) / 2; seg_no++) { + for (seg_no = 0; seg_no < ARRAY_SIZE(ms_start_idx) - 1; seg_no++) { if (log_blk < ms_start_idx[seg_no + 1]) break; } @@ -4020,7 +4020,8 @@ static int ms_rw_multi_sector(struct scsi_cmnd *srb, struct rts51x_chip *chip, log_blk++; - for (seg_no = 0; seg_no < sizeof(ms_start_idx) / 2; seg_no++) { + for (seg_no = 0; seg_no < ARRAY_SIZE(ms_start_idx) - 1; + seg_no++) { if (log_blk < ms_start_idx[seg_no + 1]) break; } diff --git a/drivers/staging/rts_pstor/ms.c b/drivers/staging/rts_pstor/ms.c index f9a4498984c..0bf6d95b3fa 100644 --- a/drivers/staging/rts_pstor/ms.c +++ b/drivers/staging/rts_pstor/ms.c @@ -4136,7 +4136,7 @@ int mg_set_ICV(struct scsi_cmnd *srb, struct rtsx_chip *chip) #else retval = ms_transfer_data(chip, MS_TM_AUTO_WRITE, PRO_WRITE_LONG_DATA, 2, WAIT_INT, 0, 0, buf + 4, 1024); - if ((retval != STATUS_SUCCESS) || check_ms_err(chip) { + if ((retval != STATUS_SUCCESS) || check_ms_err(chip)) { rtsx_clear_ms_error(chip); if (ms_card->mg_auth == 0) { if ((buf[5] & 0xC0) != 0) { diff --git a/drivers/staging/rts_pstor/rtsx_transport.c b/drivers/staging/rts_pstor/rtsx_transport.c index 9b2e5c99870..54a474235f2 100644 --- a/drivers/staging/rts_pstor/rtsx_transport.c +++ b/drivers/staging/rts_pstor/rtsx_transport.c @@ -130,7 +130,7 @@ unsigned int rtsx_stor_access_xfer_buf(unsigned char *buffer, /* Store the contents of buffer into srb's transfer buffer and set the * SCSI residue. */ void rtsx_stor_set_xfer_buf(unsigned char *buffer, - unsigned int buflen, struct scsi_cmnd *srb) + unsigned int buflen, struct scsi_cmnd *srb) { unsigned int index = 0, offset = 0; @@ -141,7 +141,7 @@ void rtsx_stor_set_xfer_buf(unsigned char *buffer, } void rtsx_stor_get_xfer_buf(unsigned char *buffer, - unsigned int buflen, struct scsi_cmnd *srb) + unsigned int buflen, struct scsi_cmnd *srb) { unsigned int index = 0, offset = 0; diff --git a/drivers/staging/sep/sep_driver_config.h b/drivers/staging/sep/sep_driver_config.h index fa7c0d09bfa..9d9fc7c94a6 100644 --- a/drivers/staging/sep/sep_driver_config.h +++ b/drivers/staging/sep/sep_driver_config.h @@ -68,11 +68,11 @@ #define SEP_DRIVER_MIN_DATA_SIZE_PER_TABLE 16 /* flag that signifies tah the lock is -currently held by the proccess (struct file) */ +currently held by the process (struct file) */ #define SEP_DRIVER_OWN_LOCK_FLAG 1 /* flag that signifies tah the lock is currently NOT -held by the proccess (struct file) */ +held by the process (struct file) */ #define SEP_DRIVER_DISOWN_LOCK_FLAG 0 /* indicates whether driver has mapped/unmapped shared area */ @@ -280,7 +280,7 @@ held by the proccess (struct file) */ /* * Used to limit number of concurrent processes - * allowed to allocte dynamic buffers in fastcall + * allowed to allocate dynamic buffers in fastcall * interface. */ #define SEP_DOUBLEBUF_USERS_LIMIT 3 diff --git a/drivers/staging/sep/sep_main.c b/drivers/staging/sep/sep_main.c index f1701bc6e31..df1d13e96fc 100644 --- a/drivers/staging/sep/sep_main.c +++ b/drivers/staging/sep/sep_main.c @@ -786,7 +786,7 @@ static unsigned int sep_poll(struct file *filp, poll_table *wait) "[PID%d] poll: send_ct is %lx reply ct is %lx\n", current->pid, sep->send_ct, sep->reply_ct); - /* Check if error occured during poll */ + /* Check if error occurred during poll */ retval2 = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR3_REG_ADDR); if ((retval2 != 0x0) && (retval2 != 0x8)) { dev_dbg(&sep->pdev->dev, "[PID%d] poll; poll error %x\n", @@ -1160,7 +1160,7 @@ static int sep_lock_kernel_pages(struct sep_device *sep, /* Put mapped kernel sg into kernel resource array */ - /* Set output params acording to the in_out flag */ + /* Set output params according to the in_out flag */ if (in_out_flag == SEP_DRIVER_IN_FLAG) { *lli_array_ptr = lli_array; dma_ctx->dma_res_arr[dma_ctx->nr_dcb_creat].in_num_pages = @@ -1358,7 +1358,7 @@ static int sep_lock_user_pages(struct sep_device *sep, lli_array[num_pages - 1].block_size); } - /* Set output params acording to the in_out flag */ + /* Set output params according to the in_out flag */ if (in_out_flag == SEP_DRIVER_IN_FLAG) { *lli_array_ptr = lli_array; dma_ctx->dma_res_arr[dma_ctx->nr_dcb_creat].in_num_pages = @@ -2038,7 +2038,7 @@ static int sep_prepare_input_dma_table(struct sep_device *sep, /* * If this is not the last table - - * then allign it to the block size + * then align it to the block size */ if (!last_table_flag) table_data_size = @@ -3033,7 +3033,7 @@ static int sep_free_dcb_handler(struct sep_device *sep, * @cmd: command * @arg: pointer to argument structure * - * Implement the ioctl methods availble on the SEP device. + * Implement the ioctl methods available on the SEP device. */ static long sep_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) { @@ -4460,7 +4460,7 @@ static int sep_pm_runtime_suspend(struct device *dev) * @sep_pm_runtime_resume: resume- no communication with cpu & main memory * @sep_pm_runtime_suspend: suspend- no communication with cpu & main memory * @sep_pci_suspend: suspend - main memory is still ON - * @sep_pci_resume: resume - main meory is still ON + * @sep_pci_resume: resume - main memory is still ON */ static const struct dev_pm_ops sep_pm = { .runtime_resume = sep_pm_runtime_resume, diff --git a/drivers/staging/serial/68360serial.c b/drivers/staging/serial/68360serial.c deleted file mode 100644 index daf0b1d0dc2..00000000000 --- a/drivers/staging/serial/68360serial.c +++ /dev/null @@ -1,2979 +0,0 @@ -/* - * UART driver for 68360 CPM SCC or SMC - * Copyright (c) 2000 D. Jeff Dionne <jeff@uclinux.org>, - * Copyright (c) 2000 Michael Leslie <mleslie@lineo.ca> - * Copyright (c) 1997 Dan Malek <dmalek@jlc.net> - * - * I used the serial.c driver as the framework for this driver. - * Give credit to those guys. - * The original code was written for the MBX860 board. I tried to make - * it generic, but there may be some assumptions in the structures that - * have to be fixed later. - * To save porting time, I did not bother to change any object names - * that are not accessed outside of this file. - * It still needs lots of work........When it was easy, I included code - * to support the SCCs, but this has never been tested, nor is it complete. - * Only the SCCs support modem control, so that is not complete either. - * - * This module exports the following rs232 io functions: - * - * int rs_360_init(void); - */ - -#include <linux/module.h> -#include <linux/errno.h> -#include <linux/signal.h> -#include <linux/sched.h> -#include <linux/timer.h> -#include <linux/interrupt.h> -#include <linux/tty.h> -#include <linux/tty_flip.h> -#include <linux/serial.h> -#include <linux/serialP.h> -#include <linux/major.h> -#include <linux/string.h> -#include <linux/fcntl.h> -#include <linux/ptrace.h> -#include <linux/mm.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <asm/irq.h> -#include <asm/m68360.h> -#include <asm/commproc.h> - - -#ifdef CONFIG_KGDB -extern void breakpoint(void); -extern void set_debug_traps(void); -extern int kgdb_output_string (const char* s, unsigned int count); -#endif - - -/* #ifdef CONFIG_SERIAL_CONSOLE */ /* This seems to be a post 2.0 thing - mles */ -#include <linux/console.h> -#include <linux/jiffies.h> - -/* this defines the index into rs_table for the port to use - */ -#ifndef CONFIG_SERIAL_CONSOLE_PORT -#define CONFIG_SERIAL_CONSOLE_PORT 1 /* ie SMC2 - note USE_SMC2 must be defined */ -#endif -/* #endif */ - -#if 0 -/* SCC2 for console - */ -#undef CONFIG_SERIAL_CONSOLE_PORT -#define CONFIG_SERIAL_CONSOLE_PORT 2 -#endif - - -#define TX_WAKEUP ASYNC_SHARE_IRQ - -static char *serial_name = "CPM UART driver"; -static char *serial_version = "0.03"; - -static struct tty_driver *serial_driver; -int serial_console_setup(struct console *co, char *options); - -/* - * Serial driver configuration section. Here are the various options: - */ -#define SERIAL_PARANOIA_CHECK -#define CONFIG_SERIAL_NOPAUSE_IO -#define SERIAL_DO_RESTART - -/* Set of debugging defines */ - -#undef SERIAL_DEBUG_INTR -#undef SERIAL_DEBUG_OPEN -#undef SERIAL_DEBUG_FLOW -#undef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT - -#define _INLINE_ inline - -#define DBG_CNT(s) - -/* We overload some of the items in the data structure to meet our - * needs. For example, the port address is the CPM parameter ram - * offset for the SCC or SMC. The maximum number of ports is 4 SCCs and - * 2 SMCs. The "hub6" field is used to indicate the channel number, with - * a flag indicating SCC or SMC, and the number is used as an index into - * the CPM parameter area for this device. - * The "type" field is currently set to 0, for PORT_UNKNOWN. It is - * not currently used. I should probably use it to indicate the port - * type of SMC or SCC. - * The SMCs do not support any modem control signals. - */ -#define smc_scc_num hub6 -#define NUM_IS_SCC ((int)0x00010000) -#define PORT_NUM(P) ((P) & 0x0000ffff) - - -#if defined (CONFIG_UCQUICC) - -volatile extern void *_periph_base; -/* sipex transceiver - * mode bits for are on pins - * - * SCC2 d16..19 - * SCC3 d20..23 - * SCC4 d24..27 - */ -#define SIPEX_MODE(n,m) ((m & 0x0f)<<(16+4*(n-1))) - -static uint sipex_mode_bits = 0x00000000; - -#endif - -/* There is no `serial_state' defined back here in 2.0. - * Try to get by with serial_struct - */ -/* #define serial_state serial_struct */ - -/* 2.4 -> 2.0 portability problem: async_icount in 2.4 has a few - * extras: */ - -#if 0 -struct async_icount_24 { - __u32 cts, dsr, rng, dcd, tx, rx; - __u32 frame, parity, overrun, brk; - __u32 buf_overrun; -} icount; -#endif - -#if 0 - -struct serial_state { - int magic; - int baud_base; - unsigned long port; - int irq; - int flags; - int hub6; - int type; - int line; - int revision; /* Chip revision (950) */ - int xmit_fifo_size; - int custom_divisor; - int count; - u8 *iomem_base; - u16 iomem_reg_shift; - unsigned short close_delay; - unsigned short closing_wait; /* time to wait before closing */ - struct async_icount_24 icount; - int io_type; - struct async_struct *info; -}; -#endif - -#define SSTATE_MAGIC 0x5302 - - - -/* SMC2 is sometimes used for low performance TDM interfaces. Define - * this as 1 if you want SMC2 as a serial port UART managed by this driver. - * Define this as 0 if you wish to use SMC2 for something else. - */ -#define USE_SMC2 1 - -#if 0 -/* Define SCC to ttySx mapping. */ -#define SCC_NUM_BASE (USE_SMC2 + 1) /* SCC base tty "number" */ - -/* Define which SCC is the first one to use for a serial port. These - * are 0-based numbers, i.e. this assumes the first SCC (SCC1) is used - * for Ethernet, and the first available SCC for serial UART is SCC2. - * NOTE: IF YOU CHANGE THIS, you have to change the PROFF_xxx and - * interrupt vectors in the table below to match. - */ -#define SCC_IDX_BASE 1 /* table index */ -#endif - - -/* Processors other than the 860 only get SMCs configured by default. - * Either they don't have SCCs or they are allocated somewhere else. - * Of course, there are now 860s without some SCCs, so we will need to - * address that someday. - * The Embedded Planet Multimedia I/O cards use TDM interfaces to the - * stereo codec parts, and we use SMC2 to help support that. - */ -static struct serial_state rs_table[] = { -/* type line PORT IRQ FLAGS smc_scc_num (F.K.A. hub6) */ - { 0, 0, PRSLOT_SMC1, CPMVEC_SMC1, 0, 0 } /* SMC1 ttyS0 */ -#if USE_SMC2 - ,{ 0, 0, PRSLOT_SMC2, CPMVEC_SMC2, 0, 1 } /* SMC2 ttyS1 */ -#endif - -#if defined(CONFIG_SERIAL_68360_SCC) - ,{ 0, 0, PRSLOT_SCC2, CPMVEC_SCC2, 0, (NUM_IS_SCC | 1) } /* SCC2 ttyS2 */ - ,{ 0, 0, PRSLOT_SCC3, CPMVEC_SCC3, 0, (NUM_IS_SCC | 2) } /* SCC3 ttyS3 */ - ,{ 0, 0, PRSLOT_SCC4, CPMVEC_SCC4, 0, (NUM_IS_SCC | 3) } /* SCC4 ttyS4 */ -#endif -}; - -#define NR_PORTS (sizeof(rs_table)/sizeof(struct serial_state)) - -/* The number of buffer descriptors and their sizes. - */ -#define RX_NUM_FIFO 4 -#define RX_BUF_SIZE 32 -#define TX_NUM_FIFO 4 -#define TX_BUF_SIZE 32 - -#define CONSOLE_NUM_FIFO 2 -#define CONSOLE_BUF_SIZE 4 - -char *console_fifos[CONSOLE_NUM_FIFO * CONSOLE_BUF_SIZE]; - -/* The async_struct in serial.h does not really give us what we - * need, so define our own here. - */ -typedef struct serial_info { - int magic; - int flags; - - struct serial_state *state; - /* struct serial_struct *state; */ - /* struct async_struct *state; */ - - struct tty_struct *tty; - int read_status_mask; - int ignore_status_mask; - int timeout; - int line; - int x_char; /* xon/xoff character */ - int close_delay; - unsigned short closing_wait; - unsigned short closing_wait2; - unsigned long event; - unsigned long last_active; - int blocked_open; /* # of blocked opens */ - struct work_struct tqueue; - struct work_struct tqueue_hangup; - wait_queue_head_t open_wait; - wait_queue_head_t close_wait; - - -/* CPM Buffer Descriptor pointers. - */ - QUICC_BD *rx_bd_base; - QUICC_BD *rx_cur; - QUICC_BD *tx_bd_base; - QUICC_BD *tx_cur; -} ser_info_t; - - -/* since kmalloc_init() does not get called until much after this initialization: */ -static ser_info_t quicc_ser_info[NR_PORTS]; -static char rx_buf_pool[NR_PORTS * RX_NUM_FIFO * RX_BUF_SIZE]; -static char tx_buf_pool[NR_PORTS * TX_NUM_FIFO * TX_BUF_SIZE]; - -static void change_speed(ser_info_t *info); -static void rs_360_wait_until_sent(struct tty_struct *tty, int timeout); - -static inline int serial_paranoia_check(ser_info_t *info, - char *name, const char *routine) -{ -#ifdef SERIAL_PARANOIA_CHECK - static const char *badmagic = - "Warning: bad magic number for serial struct (%s) in %s\n"; - static const char *badinfo = - "Warning: null async_struct for (%s) in %s\n"; - - if (!info) { - printk(badinfo, name, routine); - return 1; - } - if (info->magic != SERIAL_MAGIC) { - printk(badmagic, name, routine); - return 1; - } -#endif - return 0; -} - -/* - * This is used to figure out the divisor speeds and the timeouts, - * indexed by the termio value. The generic CPM functions are responsible - * for setting and assigning baud rate generators for us. - */ -static int baud_table[] = { - 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800, - 9600, 19200, 38400, 57600, 115200, 230400, 460800, 0 }; - -/* This sucks. There is a better way: */ -#if defined(CONFIG_CONSOLE_9600) - #define CONSOLE_BAUDRATE 9600 -#elif defined(CONFIG_CONSOLE_19200) - #define CONSOLE_BAUDRATE 19200 -#elif defined(CONFIG_CONSOLE_115200) - #define CONSOLE_BAUDRATE 115200 -#else - #warning "console baud rate undefined" - #define CONSOLE_BAUDRATE 9600 -#endif - -/* - * ------------------------------------------------------------ - * rs_stop() and rs_start() - * - * This routines are called before setting or resetting tty->stopped. - * They enable or disable transmitter interrupts, as necessary. - * ------------------------------------------------------------ - */ -static void rs_360_stop(struct tty_struct *tty) -{ - ser_info_t *info = (ser_info_t *)tty->driver_data; - int idx; - unsigned long flags; - volatile struct scc_regs *sccp; - volatile struct smc_regs *smcp; - - if (serial_paranoia_check(info, tty->name, "rs_stop")) - return; - - local_irq_save(flags); - idx = PORT_NUM(info->state->smc_scc_num); - if (info->state->smc_scc_num & NUM_IS_SCC) { - sccp = &pquicc->scc_regs[idx]; - sccp->scc_sccm &= ~UART_SCCM_TX; - } else { - /* smcp = &cpmp->cp_smc[idx]; */ - smcp = &pquicc->smc_regs[idx]; - smcp->smc_smcm &= ~SMCM_TX; - } - local_irq_restore(flags); -} - - -static void rs_360_start(struct tty_struct *tty) -{ - ser_info_t *info = (ser_info_t *)tty->driver_data; - int idx; - unsigned long flags; - volatile struct scc_regs *sccp; - volatile struct smc_regs *smcp; - - if (serial_paranoia_check(info, tty->name, "rs_stop")) - return; - - local_irq_save(flags); - idx = PORT_NUM(info->state->smc_scc_num); - if (info->state->smc_scc_num & NUM_IS_SCC) { - sccp = &pquicc->scc_regs[idx]; - sccp->scc_sccm |= UART_SCCM_TX; - } else { - smcp = &pquicc->smc_regs[idx]; - smcp->smc_smcm |= SMCM_TX; - } - local_irq_restore(flags); -} - -/* - * ---------------------------------------------------------------------- - * - * Here starts the interrupt handling routines. All of the following - * subroutines are declared as inline and are folded into - * rs_interrupt(). They were separated out for readability's sake. - * - * Note: rs_interrupt() is a "fast" interrupt, which means that it - * runs with interrupts turned off. People who may want to modify - * rs_interrupt() should try to keep the interrupt handler as fast as - * possible. After you are done making modifications, it is not a bad - * idea to do: - * - * gcc -S -DKERNEL -Wall -Wstrict-prototypes -O6 -fomit-frame-pointer serial.c - * - * and look at the resulting assemble code in serial.s. - * - * - Ted Ts'o (tytso@mit.edu), 7-Mar-93 - * ----------------------------------------------------------------------- - */ - -static _INLINE_ void receive_chars(ser_info_t *info) -{ - struct tty_struct *tty = info->port.tty; - unsigned char ch, flag, *cp; - /*int ignored = 0;*/ - int i; - ushort status; - struct async_icount *icount; - /* struct async_icount_24 *icount; */ - volatile QUICC_BD *bdp; - - icount = &info->state->icount; - - /* Just loop through the closed BDs and copy the characters into - * the buffer. - */ - bdp = info->rx_cur; - for (;;) { - if (bdp->status & BD_SC_EMPTY) /* If this one is empty */ - break; /* we are all done */ - - /* The read status mask tell us what we should do with - * incoming characters, especially if errors occur. - * One special case is the use of BD_SC_EMPTY. If - * this is not set, we are supposed to be ignoring - * inputs. In this case, just mark the buffer empty and - * continue. - */ - if (!(info->read_status_mask & BD_SC_EMPTY)) { - bdp->status |= BD_SC_EMPTY; - bdp->status &= - ~(BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_OV); - - if (bdp->status & BD_SC_WRAP) - bdp = info->rx_bd_base; - else - bdp++; - continue; - } - - /* Get the number of characters and the buffer pointer. - */ - i = bdp->length; - /* cp = (unsigned char *)__va(bdp->buf); */ - cp = (char *)bdp->buf; - status = bdp->status; - - while (i-- > 0) { - ch = *cp++; - icount->rx++; - -#ifdef SERIAL_DEBUG_INTR - printk("DR%02x:%02x...", ch, status); -#endif - flag = TTY_NORMAL; - - if (status & (BD_SC_BR | BD_SC_FR | - BD_SC_PR | BD_SC_OV)) { - /* - * For statistics only - */ - if (status & BD_SC_BR) - icount->brk++; - else if (status & BD_SC_PR) - icount->parity++; - else if (status & BD_SC_FR) - icount->frame++; - if (status & BD_SC_OV) - icount->overrun++; - - /* - * Now check to see if character should be - * ignored, and mask off conditions which - * should be ignored. - if (status & info->ignore_status_mask) { - if (++ignored > 100) - break; - continue; - } - */ - status &= info->read_status_mask; - - if (status & (BD_SC_BR)) { -#ifdef SERIAL_DEBUG_INTR - printk("handling break...."); -#endif - *tty->flip.flag_buf_ptr = TTY_BREAK; - if (info->flags & ASYNC_SAK) - do_SAK(tty); - } else if (status & BD_SC_PR) - flag = TTY_PARITY; - else if (status & BD_SC_FR) - flag = TTY_FRAME; - } - tty_insert_flip_char(tty, ch, flag); - if (status & BD_SC_OV) - /* - * Overrun is special, since it's - * reported immediately, and doesn't - * affect the current character - */ - tty_insert_flip_char(tty, 0, TTY_OVERRUN); - } - - /* This BD is ready to be used again. Clear status. - * Get next BD. - */ - bdp->status |= BD_SC_EMPTY; - bdp->status &= ~(BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_OV); - - if (bdp->status & BD_SC_WRAP) - bdp = info->rx_bd_base; - else - bdp++; - } - - info->rx_cur = (QUICC_BD *)bdp; - - tty_schedule_flip(tty); -} - -static _INLINE_ void receive_break(ser_info_t *info) -{ - struct tty_struct *tty = info->port.tty; - - info->state->icount.brk++; - /* Check to see if there is room in the tty buffer for - * the break. If not, we exit now, losing the break. FIXME - */ - tty_insert_flip_char(tty, 0, TTY_BREAK); - tty_schedule_flip(tty); -} - -static _INLINE_ void transmit_chars(ser_info_t *info) -{ - - if ((info->flags & TX_WAKEUP) || - (info->port.tty->flags & (1 << TTY_DO_WRITE_WAKEUP))) { - schedule_work(&info->tqueue); - } - -#ifdef SERIAL_DEBUG_INTR - printk("THRE..."); -#endif -} - -#ifdef notdef - /* I need to do this for the SCCs, so it is left as a reminder. - */ -static _INLINE_ void check_modem_status(struct async_struct *info) -{ - int status; - /* struct async_icount *icount; */ - struct async_icount_24 *icount; - - status = serial_in(info, UART_MSR); - - if (status & UART_MSR_ANY_DELTA) { - icount = &info->state->icount; - /* update input line counters */ - if (status & UART_MSR_TERI) - icount->rng++; - if (status & UART_MSR_DDSR) - icount->dsr++; - if (status & UART_MSR_DDCD) { - icount->dcd++; -#ifdef CONFIG_HARD_PPS - if ((info->flags & ASYNC_HARDPPS_CD) && - (status & UART_MSR_DCD)) - hardpps(); -#endif - } - if (status & UART_MSR_DCTS) - icount->cts++; - wake_up_interruptible(&info->delta_msr_wait); - } - - if ((info->flags & ASYNC_CHECK_CD) && (status & UART_MSR_DDCD)) { -#if (defined(SERIAL_DEBUG_OPEN) || defined(SERIAL_DEBUG_INTR)) - printk("ttys%d CD now %s...", info->line, - (status & UART_MSR_DCD) ? "on" : "off"); -#endif - if (status & UART_MSR_DCD) - wake_up_interruptible(&info->open_wait); - else { -#ifdef SERIAL_DEBUG_OPEN - printk("scheduling hangup..."); -#endif - queue_task(&info->tqueue_hangup, - &tq_scheduler); - } - } - if (info->flags & ASYNC_CTS_FLOW) { - if (info->port.tty->hw_stopped) { - if (status & UART_MSR_CTS) { -#if (defined(SERIAL_DEBUG_INTR) || defined(SERIAL_DEBUG_FLOW)) - printk("CTS tx start..."); -#endif - info->port.tty->hw_stopped = 0; - info->IER |= UART_IER_THRI; - serial_out(info, UART_IER, info->IER); - rs_sched_event(info, RS_EVENT_WRITE_WAKEUP); - return; - } - } else { - if (!(status & UART_MSR_CTS)) { -#if (defined(SERIAL_DEBUG_INTR) || defined(SERIAL_DEBUG_FLOW)) - printk("CTS tx stop..."); -#endif - info->port.tty->hw_stopped = 1; - info->IER &= ~UART_IER_THRI; - serial_out(info, UART_IER, info->IER); - } - } - } -} -#endif - -/* - * This is the serial driver's interrupt routine for a single port - */ -/* static void rs_360_interrupt(void *dev_id) */ /* until and if we start servicing irqs here */ -static void rs_360_interrupt(int vec, void *dev_id) -{ - u_char events; - int idx; - ser_info_t *info; - volatile struct smc_regs *smcp; - volatile struct scc_regs *sccp; - - info = dev_id; - - idx = PORT_NUM(info->state->smc_scc_num); - if (info->state->smc_scc_num & NUM_IS_SCC) { - sccp = &pquicc->scc_regs[idx]; - events = sccp->scc_scce; - if (events & SCCM_RX) - receive_chars(info); - if (events & SCCM_TX) - transmit_chars(info); - sccp->scc_scce = events; - } else { - smcp = &pquicc->smc_regs[idx]; - events = smcp->smc_smce; - if (events & SMCM_BRKE) - receive_break(info); - if (events & SMCM_RX) - receive_chars(info); - if (events & SMCM_TX) - transmit_chars(info); - smcp->smc_smce = events; - } - -#ifdef SERIAL_DEBUG_INTR - printk("rs_interrupt_single(%d, %x)...", - info->state->smc_scc_num, events); -#endif -#ifdef modem_control - check_modem_status(info); -#endif - info->last_active = jiffies; -#ifdef SERIAL_DEBUG_INTR - printk("end.\n"); -#endif -} - - -/* - * ------------------------------------------------------------------- - * Here ends the serial interrupt routines. - * ------------------------------------------------------------------- - */ - - -static void do_softint(void *private_) -{ - ser_info_t *info = (ser_info_t *) private_; - struct tty_struct *tty; - - tty = info->port.tty; - if (!tty) - return; - - if (test_and_clear_bit(RS_EVENT_WRITE_WAKEUP, &info->event)) - tty_wakeup(tty); -} - - -/* - * This routine is called from the scheduler tqueue when the interrupt - * routine has signalled that a hangup has occurred. The path of - * hangup processing is: - * - * serial interrupt routine -> (scheduler tqueue) -> - * do_serial_hangup() -> tty->hangup() -> rs_hangup() - * - */ -static void do_serial_hangup(void *private_) -{ - struct async_struct *info = (struct async_struct *) private_; - struct tty_struct *tty; - - tty = info->port.tty; - if (!tty) - return; - - tty_hangup(tty); -} - - -static int startup(ser_info_t *info) -{ - unsigned long flags; - int retval=0; - int idx; - /*struct serial_state *state = info->state;*/ - volatile struct smc_regs *smcp; - volatile struct scc_regs *sccp; - volatile struct smc_uart_pram *up; - volatile struct uart_pram *scup; - - - local_irq_save(flags); - - if (info->flags & ASYNC_INITIALIZED) { - goto errout; - } - -#ifdef maybe - if (!state->port || !state->type) { - if (info->port.tty) - set_bit(TTY_IO_ERROR, &info->port.tty->flags); - goto errout; - } -#endif - -#ifdef SERIAL_DEBUG_OPEN - printk("starting up ttys%d (irq %d)...", info->line, state->irq); -#endif - - -#ifdef modem_control - info->MCR = 0; - if (info->port.tty->termios->c_cflag & CBAUD) - info->MCR = UART_MCR_DTR | UART_MCR_RTS; -#endif - - if (info->port.tty) - clear_bit(TTY_IO_ERROR, &info->port.tty->flags); - - /* - * and set the speed of the serial port - */ - change_speed(info); - - idx = PORT_NUM(info->state->smc_scc_num); - if (info->state->smc_scc_num & NUM_IS_SCC) { - sccp = &pquicc->scc_regs[idx]; - scup = &pquicc->pram[info->state->port].scc.pscc.u; - - scup->mrblr = RX_BUF_SIZE; - scup->max_idl = RX_BUF_SIZE; - - sccp->scc_sccm |= (UART_SCCM_TX | UART_SCCM_RX); - sccp->scc_gsmr.w.low |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT); - - } else { - smcp = &pquicc->smc_regs[idx]; - - /* Enable interrupts and I/O. - */ - smcp->smc_smcm |= (SMCM_RX | SMCM_TX); - smcp->smc_smcmr |= (SMCMR_REN | SMCMR_TEN); - - /* We can tune the buffer length and idle characters - * to take advantage of the entire incoming buffer size. - * If mrblr is something other than 1, maxidl has to be - * non-zero or we never get an interrupt. The maxidl - * is the number of character times we wait after reception - * of the last character before we decide no more characters - * are coming. - */ - /* up = (smc_uart_t *)&pquicc->cp_dparam[state->port]; */ - /* holy unionized structures, Batman: */ - up = &pquicc->pram[info->state->port].scc.pothers.idma_smc.psmc.u; - - up->mrblr = RX_BUF_SIZE; - up->max_idl = RX_BUF_SIZE; - - up->brkcr = 1; /* number of break chars */ - } - - info->flags |= ASYNC_INITIALIZED; - local_irq_restore(flags); - return 0; - -errout: - local_irq_restore(flags); - return retval; -} - -/* - * This routine will shutdown a serial port; interrupts are disabled, and - * DTR is dropped if the hangup on close termio flag is on. - */ -static void shutdown(ser_info_t *info) -{ - unsigned long flags; - struct serial_state *state; - int idx; - volatile struct smc_regs *smcp; - volatile struct scc_regs *sccp; - - if (!(info->flags & ASYNC_INITIALIZED)) - return; - - state = info->state; - -#ifdef SERIAL_DEBUG_OPEN - printk("Shutting down serial port %d (irq %d)....", info->line, - state->irq); -#endif - - local_irq_save(flags); - - idx = PORT_NUM(state->smc_scc_num); - if (state->smc_scc_num & NUM_IS_SCC) { - sccp = &pquicc->scc_regs[idx]; - sccp->scc_gsmr.w.low &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT); -#ifdef CONFIG_SERIAL_CONSOLE - /* We can't disable the transmitter if this is the - * system console. - */ - if ((state - rs_table) != CONFIG_SERIAL_CONSOLE_PORT) -#endif - sccp->scc_sccm &= ~(UART_SCCM_TX | UART_SCCM_RX); - } else { - smcp = &pquicc->smc_regs[idx]; - - /* Disable interrupts and I/O. - */ - smcp->smc_smcm &= ~(SMCM_RX | SMCM_TX); -#ifdef CONFIG_SERIAL_CONSOLE - /* We can't disable the transmitter if this is the - * system console. - */ - if ((state - rs_table) != CONFIG_SERIAL_CONSOLE_PORT) -#endif - smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN); - } - - if (info->port.tty) - set_bit(TTY_IO_ERROR, &info->port.tty->flags); - - info->flags &= ~ASYNC_INITIALIZED; - local_irq_restore(flags); -} - -/* - * This routine is called to set the UART divisor registers to match - * the specified baud rate for a serial port. - */ -static void change_speed(ser_info_t *info) -{ - int baud_rate; - unsigned cflag, cval, scval, prev_mode; - int i, bits, sbits, idx; - unsigned long flags; - struct serial_state *state; - volatile struct smc_regs *smcp; - volatile struct scc_regs *sccp; - - if (!info->port.tty || !info->port.tty->termios) - return; - cflag = info->port.tty->termios->c_cflag; - - state = info->state; - - /* Character length programmed into the mode register is the - * sum of: 1 start bit, number of data bits, 0 or 1 parity bit, - * 1 or 2 stop bits, minus 1. - * The value 'bits' counts this for us. - */ - cval = 0; - scval = 0; - - /* byte size and parity */ - switch (cflag & CSIZE) { - case CS5: bits = 5; break; - case CS6: bits = 6; break; - case CS7: bits = 7; break; - case CS8: bits = 8; break; - /* Never happens, but GCC is too dumb to figure it out */ - default: bits = 8; break; - } - sbits = bits - 5; - - if (cflag & CSTOPB) { - cval |= SMCMR_SL; /* Two stops */ - scval |= SCU_PMSR_SL; - bits++; - } - if (cflag & PARENB) { - cval |= SMCMR_PEN; - scval |= SCU_PMSR_PEN; - bits++; - } - if (!(cflag & PARODD)) { - cval |= SMCMR_PM_EVEN; - scval |= (SCU_PMSR_REVP | SCU_PMSR_TEVP); - } - - /* Determine divisor based on baud rate */ - i = cflag & CBAUD; - if (i >= (sizeof(baud_table)/sizeof(int))) - baud_rate = 9600; - else - baud_rate = baud_table[i]; - - info->timeout = (TX_BUF_SIZE*HZ*bits); - info->timeout += HZ/50; /* Add .02 seconds of slop */ - -#ifdef modem_control - /* CTS flow control flag and modem status interrupts */ - info->IER &= ~UART_IER_MSI; - if (info->flags & ASYNC_HARDPPS_CD) - info->IER |= UART_IER_MSI; - if (cflag & CRTSCTS) { - info->flags |= ASYNC_CTS_FLOW; - info->IER |= UART_IER_MSI; - } else - info->flags &= ~ASYNC_CTS_FLOW; - if (cflag & CLOCAL) - info->flags &= ~ASYNC_CHECK_CD; - else { - info->flags |= ASYNC_CHECK_CD; - info->IER |= UART_IER_MSI; - } - serial_out(info, UART_IER, info->IER); -#endif - - /* - * Set up parity check flag - */ - info->read_status_mask = (BD_SC_EMPTY | BD_SC_OV); - if (I_INPCK(info->port.tty)) - info->read_status_mask |= BD_SC_FR | BD_SC_PR; - if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty)) - info->read_status_mask |= BD_SC_BR; - - /* - * Characters to ignore - */ - info->ignore_status_mask = 0; - if (I_IGNPAR(info->port.tty)) - info->ignore_status_mask |= BD_SC_PR | BD_SC_FR; - if (I_IGNBRK(info->port.tty)) { - info->ignore_status_mask |= BD_SC_BR; - /* - * If we're ignore parity and break indicators, ignore - * overruns too. (For real raw support). - */ - if (I_IGNPAR(info->port.tty)) - info->ignore_status_mask |= BD_SC_OV; - } - /* - * !!! ignore all characters if CREAD is not set - */ - if ((cflag & CREAD) == 0) - info->read_status_mask &= ~BD_SC_EMPTY; - local_irq_save(flags); - - /* Start bit has not been added (so don't, because we would just - * subtract it later), and we need to add one for the number of - * stops bits (there is always at least one). - */ - bits++; - idx = PORT_NUM(state->smc_scc_num); - if (state->smc_scc_num & NUM_IS_SCC) { - sccp = &pquicc->scc_regs[idx]; - sccp->scc_psmr = (sbits << 12) | scval; - } else { - smcp = &pquicc->smc_regs[idx]; - - /* Set the mode register. We want to keep a copy of the - * enables, because we want to put them back if they were - * present. - */ - prev_mode = smcp->smc_smcmr; - smcp->smc_smcmr = smcr_mk_clen(bits) | cval | SMCMR_SM_UART; - smcp->smc_smcmr |= (prev_mode & (SMCMR_REN | SMCMR_TEN)); - } - - m360_cpm_setbrg((state - rs_table), baud_rate); - - local_irq_restore(flags); -} - -static void rs_360_put_char(struct tty_struct *tty, unsigned char ch) -{ - ser_info_t *info = (ser_info_t *)tty->driver_data; - volatile QUICC_BD *bdp; - - if (serial_paranoia_check(info, tty->name, "rs_put_char")) - return 0; - - if (!tty) - return 0; - - bdp = info->tx_cur; - while (bdp->status & BD_SC_READY); - - /* *((char *)__va(bdp->buf)) = ch; */ - *((char *)bdp->buf) = ch; - bdp->length = 1; - bdp->status |= BD_SC_READY; - - /* Get next BD. - */ - if (bdp->status & BD_SC_WRAP) - bdp = info->tx_bd_base; - else - bdp++; - - info->tx_cur = (QUICC_BD *)bdp; - return 1; - -} - -static int rs_360_write(struct tty_struct * tty, - const unsigned char *buf, int count) -{ - int c, ret = 0; - ser_info_t *info = (ser_info_t *)tty->driver_data; - volatile QUICC_BD *bdp; - -#ifdef CONFIG_KGDB - /* Try to let stub handle output. Returns true if it did. */ - if (kgdb_output_string(buf, count)) - return ret; -#endif - - if (serial_paranoia_check(info, tty->name, "rs_write")) - return 0; - - if (!tty) - return 0; - - bdp = info->tx_cur; - - while (1) { - c = min(count, TX_BUF_SIZE); - - if (c <= 0) - break; - - if (bdp->status & BD_SC_READY) { - info->flags |= TX_WAKEUP; - break; - } - - /* memcpy(__va(bdp->buf), buf, c); */ - memcpy((void *)bdp->buf, buf, c); - - bdp->length = c; - bdp->status |= BD_SC_READY; - - buf += c; - count -= c; - ret += c; - - /* Get next BD. - */ - if (bdp->status & BD_SC_WRAP) - bdp = info->tx_bd_base; - else - bdp++; - info->tx_cur = (QUICC_BD *)bdp; - } - return ret; -} - -static int rs_360_write_room(struct tty_struct *tty) -{ - ser_info_t *info = (ser_info_t *)tty->driver_data; - int ret; - - if (serial_paranoia_check(info, tty->name, "rs_write_room")) - return 0; - - if ((info->tx_cur->status & BD_SC_READY) == 0) { - info->flags &= ~TX_WAKEUP; - ret = TX_BUF_SIZE; - } - else { - info->flags |= TX_WAKEUP; - ret = 0; - } - return ret; -} - -/* I could track this with transmit counters....maybe later. -*/ -static int rs_360_chars_in_buffer(struct tty_struct *tty) -{ - ser_info_t *info = (ser_info_t *)tty->driver_data; - - if (serial_paranoia_check(info, tty->name, "rs_chars_in_buffer")) - return 0; - return 0; -} - -static void rs_360_flush_buffer(struct tty_struct *tty) -{ - ser_info_t *info = (ser_info_t *)tty->driver_data; - - if (serial_paranoia_check(info, tty->name, "rs_flush_buffer")) - return; - - /* There is nothing to "flush", whatever we gave the CPM - * is on its way out. - */ - tty_wakeup(tty); - info->flags &= ~TX_WAKEUP; -} - -/* - * This function is used to send a high-priority XON/XOFF character to - * the device - */ -static void rs_360_send_xchar(struct tty_struct *tty, char ch) -{ - volatile QUICC_BD *bdp; - - ser_info_t *info = (ser_info_t *)tty->driver_data; - - if (serial_paranoia_check(info, tty->name, "rs_send_char")) - return; - - bdp = info->tx_cur; - while (bdp->status & BD_SC_READY); - - /* *((char *)__va(bdp->buf)) = ch; */ - *((char *)bdp->buf) = ch; - bdp->length = 1; - bdp->status |= BD_SC_READY; - - /* Get next BD. - */ - if (bdp->status & BD_SC_WRAP) - bdp = info->tx_bd_base; - else - bdp++; - - info->tx_cur = (QUICC_BD *)bdp; -} - -/* - * ------------------------------------------------------------ - * rs_throttle() - * - * This routine is called by the upper-layer tty layer to signal that - * incoming characters should be throttled. - * ------------------------------------------------------------ - */ -static void rs_360_throttle(struct tty_struct * tty) -{ - ser_info_t *info = (ser_info_t *)tty->driver_data; -#ifdef SERIAL_DEBUG_THROTTLE - char buf[64]; - - printk("throttle %s: %d....\n", _tty_name(tty, buf), - tty->ldisc.chars_in_buffer(tty)); -#endif - - if (serial_paranoia_check(info, tty->name, "rs_throttle")) - return; - - if (I_IXOFF(tty)) - rs_360_send_xchar(tty, STOP_CHAR(tty)); - -#ifdef modem_control - if (tty->termios->c_cflag & CRTSCTS) - info->MCR &= ~UART_MCR_RTS; - - local_irq_disable(); - serial_out(info, UART_MCR, info->MCR); - local_irq_enable(); -#endif -} - -static void rs_360_unthrottle(struct tty_struct * tty) -{ - ser_info_t *info = (ser_info_t *)tty->driver_data; -#ifdef SERIAL_DEBUG_THROTTLE - char buf[64]; - - printk("unthrottle %s: %d....\n", _tty_name(tty, buf), - tty->ldisc.chars_in_buffer(tty)); -#endif - - if (serial_paranoia_check(info, tty->name, "rs_unthrottle")) - return; - - if (I_IXOFF(tty)) { - if (info->x_char) - info->x_char = 0; - else - rs_360_send_xchar(tty, START_CHAR(tty)); - } -#ifdef modem_control - if (tty->termios->c_cflag & CRTSCTS) - info->MCR |= UART_MCR_RTS; - local_irq_disable(); - serial_out(info, UART_MCR, info->MCR); - local_irq_enable(); -#endif -} - -/* - * ------------------------------------------------------------ - * rs_ioctl() and friends - * ------------------------------------------------------------ - */ - -#ifdef maybe -/* - * get_lsr_info - get line status register info - * - * Purpose: Let user call ioctl() to get info when the UART physically - * is emptied. On bus types like RS485, the transmitter must - * release the bus after transmitting. This must be done when - * the transmit shift register is empty, not be done when the - * transmit holding register is empty. This functionality - * allows an RS485 driver to be written in user space. - */ -static int get_lsr_info(struct async_struct * info, unsigned int *value) -{ - unsigned char status; - unsigned int result; - - local_irq_disable(); - status = serial_in(info, UART_LSR); - local_irq_enable(); - result = ((status & UART_LSR_TEMT) ? TIOCSER_TEMT : 0); - return put_user(result,value); -} -#endif - -static int rs_360_tiocmget(struct tty_struct *tty) -{ - ser_info_t *info = (ser_info_t *)tty->driver_data; - unsigned int result = 0; -#ifdef modem_control - unsigned char control, status; - - if (serial_paranoia_check(info, tty->name, __func__)) - return -ENODEV; - - if (tty->flags & (1 << TTY_IO_ERROR)) - return -EIO; - - control = info->MCR; - local_irq_disable(); - status = serial_in(info, UART_MSR); - local_irq_enable(); - result = ((control & UART_MCR_RTS) ? TIOCM_RTS : 0) - | ((control & UART_MCR_DTR) ? TIOCM_DTR : 0) -#ifdef TIOCM_OUT1 - | ((control & UART_MCR_OUT1) ? TIOCM_OUT1 : 0) - | ((control & UART_MCR_OUT2) ? TIOCM_OUT2 : 0) -#endif - | ((status & UART_MSR_DCD) ? TIOCM_CAR : 0) - | ((status & UART_MSR_RI) ? TIOCM_RNG : 0) - | ((status & UART_MSR_DSR) ? TIOCM_DSR : 0) - | ((status & UART_MSR_CTS) ? TIOCM_CTS : 0); -#endif - return result; -} - -static int rs_360_tiocmset(struct tty_struct *tty, - unsigned int set, unsigned int clear) -{ -#ifdef modem_control - ser_info_t *info = (ser_info_t *)tty->driver_data; - unsigned int arg; - - if (serial_paranoia_check(info, tty->name, __func__)) - return -ENODEV; - - if (tty->flags & (1 << TTY_IO_ERROR)) - return -EIO; - /* FIXME: locking on info->mcr */ - if (set & TIOCM_RTS) - info->mcr |= UART_MCR_RTS; - if (set & TIOCM_DTR) - info->mcr |= UART_MCR_DTR; - if (clear & TIOCM_RTS) - info->MCR &= ~UART_MCR_RTS; - if (clear & TIOCM_DTR) - info->MCR &= ~UART_MCR_DTR; - -#ifdef TIOCM_OUT1 - if (set & TIOCM_OUT1) - info->MCR |= UART_MCR_OUT1; - if (set & TIOCM_OUT2) - info->MCR |= UART_MCR_OUT2; - if (clear & TIOCM_OUT1) - info->MCR &= ~UART_MCR_OUT1; - if (clear & TIOCM_OUT2) - info->MCR &= ~UART_MCR_OUT2; -#endif - - local_irq_disable(); - serial_out(info, UART_MCR, info->MCR); - local_irq_enable(); -#endif - return 0; -} - -/* Sending a break is a two step process on the SMC/SCC. It is accomplished - * by sending a STOP TRANSMIT command followed by a RESTART TRANSMIT - * command. We take advantage of the begin/end functions to make this - * happen. - */ -static ushort smc_chan_map[] = { - CPM_CR_CH_SMC1, - CPM_CR_CH_SMC2 -}; - -static ushort scc_chan_map[] = { - CPM_CR_CH_SCC1, - CPM_CR_CH_SCC2, - CPM_CR_CH_SCC3, - CPM_CR_CH_SCC4 -}; - -static void begin_break(ser_info_t *info) -{ - volatile QUICC *cp; - ushort chan; - int idx; - - cp = pquicc; - - idx = PORT_NUM(info->state->smc_scc_num); - if (info->state->smc_scc_num & NUM_IS_SCC) - chan = scc_chan_map[idx]; - else - chan = smc_chan_map[idx]; - - cp->cp_cr = mk_cr_cmd(chan, CPM_CR_STOP_TX) | CPM_CR_FLG; - while (cp->cp_cr & CPM_CR_FLG); -} - -static void end_break(ser_info_t *info) -{ - volatile QUICC *cp; - ushort chan; - int idx; - - cp = pquicc; - - idx = PORT_NUM(info->state->smc_scc_num); - if (info->state->smc_scc_num & NUM_IS_SCC) - chan = scc_chan_map[idx]; - else - chan = smc_chan_map[idx]; - - cp->cp_cr = mk_cr_cmd(chan, CPM_CR_RESTART_TX) | CPM_CR_FLG; - while (cp->cp_cr & CPM_CR_FLG); -} - -/* - * This routine sends a break character out the serial port. - */ -static void send_break(ser_info_t *info, unsigned int duration) -{ -#ifdef SERIAL_DEBUG_SEND_BREAK - printk("rs_send_break(%d) jiff=%lu...", duration, jiffies); -#endif - begin_break(info); - msleep_interruptible(duration); - end_break(info); -#ifdef SERIAL_DEBUG_SEND_BREAK - printk("done jiffies=%lu\n", jiffies); -#endif -} - - -/* - * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) - * Return: write counters to the user passed counter struct - * NB: both 1->0 and 0->1 transitions are counted except for - * RI where only 0->1 is counted. - */ -static int rs_360_get_icount(struct tty_struct *tty, - struct serial_icounter_struct *icount) -{ - ser_info_t *info = (ser_info_t *)tty->driver_data; - struct async_icount cnow; - - local_irq_disable(); - cnow = info->state->icount; - local_irq_enable(); - - icount->cts = cnow.cts; - icount->dsr = cnow.dsr; - icount->rng = cnow.rng; - icount->dcd = cnow.dcd; - - return 0; -} - -static int rs_360_ioctl(struct tty_struct *tty, - unsigned int cmd, unsigned long arg) -{ - int error; - ser_info_t *info = (ser_info_t *)tty->driver_data; - int retval; - struct async_icount cnow; - /* struct async_icount_24 cnow;*/ /* kernel counter temps */ - struct serial_icounter_struct *p_cuser; /* user space */ - - if (serial_paranoia_check(info, tty->name, "rs_ioctl")) - return -ENODEV; - - if (cmd != TIOCMIWAIT) { - if (tty->flags & (1 << TTY_IO_ERROR)) - return -EIO; - } - - switch (cmd) { - case TCSBRK: /* SVID version: non-zero arg --> no break */ - retval = tty_check_change(tty); - if (retval) - return retval; - tty_wait_until_sent(tty, 0); - if (signal_pending(current)) - return -EINTR; - if (!arg) { - send_break(info, 250); /* 1/4 second */ - if (signal_pending(current)) - return -EINTR; - } - return 0; - case TCSBRKP: /* support for POSIX tcsendbreak() */ - retval = tty_check_change(tty); - if (retval) - return retval; - tty_wait_until_sent(tty, 0); - if (signal_pending(current)) - return -EINTR; - send_break(info, arg ? arg*100 : 250); - if (signal_pending(current)) - return -EINTR; - return 0; - case TIOCSBRK: - retval = tty_check_change(tty); - if (retval) - return retval; - tty_wait_until_sent(tty, 0); - begin_break(info); - return 0; - case TIOCCBRK: - retval = tty_check_change(tty); - if (retval) - return retval; - end_break(info); - return 0; -#ifdef maybe - case TIOCSERGETLSR: /* Get line status register */ - return get_lsr_info(info, (unsigned int *) arg); -#endif - /* - * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change - * - mask passed in arg for lines of interest - * (use |'ed TIOCM_RNG/DSR/CD/CTS for masking) - * Caller should use TIOCGICOUNT to see which one it was - */ - case TIOCMIWAIT: -#ifdef modem_control - local_irq_disable(); - /* note the counters on entry */ - cprev = info->state->icount; - local_irq_enable(); - while (1) { - interruptible_sleep_on(&info->delta_msr_wait); - /* see if a signal did it */ - if (signal_pending(current)) - return -ERESTARTSYS; - local_irq_disable(); - cnow = info->state->icount; /* atomic copy */ - local_irq_enable(); - if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && - cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) - return -EIO; /* no change => error */ - if ( ((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) || - ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) || - ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) || - ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts)) ) { - return 0; - } - cprev = cnow; - } - /* NOTREACHED */ -#else - return 0; -#endif - - - default: - return -ENOIOCTLCMD; - } - return 0; -} - -/* FIX UP modem control here someday...... -*/ -static void rs_360_set_termios(struct tty_struct *tty, struct ktermios *old_termios) -{ - ser_info_t *info = (ser_info_t *)tty->driver_data; - - change_speed(info); - -#ifdef modem_control - /* Handle transition to B0 status */ - if ((old_termios->c_cflag & CBAUD) && - !(tty->termios->c_cflag & CBAUD)) { - info->MCR &= ~(UART_MCR_DTR|UART_MCR_RTS); - local_irq_disable(); - serial_out(info, UART_MCR, info->MCR); - local_irq_enable(); - } - - /* Handle transition away from B0 status */ - if (!(old_termios->c_cflag & CBAUD) && - (tty->termios->c_cflag & CBAUD)) { - info->MCR |= UART_MCR_DTR; - if (!tty->hw_stopped || - !(tty->termios->c_cflag & CRTSCTS)) { - info->MCR |= UART_MCR_RTS; - } - local_irq_disable(); - serial_out(info, UART_MCR, info->MCR); - local_irq_enable(); - } - - /* Handle turning off CRTSCTS */ - if ((old_termios->c_cflag & CRTSCTS) && - !(tty->termios->c_cflag & CRTSCTS)) { - tty->hw_stopped = 0; - rs_360_start(tty); - } -#endif - -#if 0 - /* - * No need to wake up processes in open wait, since they - * sample the CLOCAL flag once, and don't recheck it. - * XXX It's not clear whether the current behavior is correct - * or not. Hence, this may change..... - */ - if (!(old_termios->c_cflag & CLOCAL) && - (tty->termios->c_cflag & CLOCAL)) - wake_up_interruptible(&info->open_wait); -#endif -} - -/* - * ------------------------------------------------------------ - * rs_close() - * - * This routine is called when the serial port gets closed. First, we - * wait for the last remaining data to be sent. Then, we unlink its - * async structure from the interrupt chain if necessary, and we free - * that IRQ if nothing is left in the chain. - * ------------------------------------------------------------ - */ -static void rs_360_close(struct tty_struct *tty, struct file * filp) -{ - ser_info_t *info = (ser_info_t *)tty->driver_data; - /* struct async_state *state; */ - struct serial_state *state; - unsigned long flags; - int idx; - volatile struct smc_regs *smcp; - volatile struct scc_regs *sccp; - - if (!info || serial_paranoia_check(info, tty->name, "rs_close")) - return; - - state = info->state; - - local_irq_save(flags); - - if (tty_hung_up_p(filp)) { - DBG_CNT("before DEC-hung"); - local_irq_restore(flags); - return; - } - -#ifdef SERIAL_DEBUG_OPEN - printk("rs_close ttys%d, count = %d\n", info->line, state->count); -#endif - if ((tty->count == 1) && (state->count != 1)) { - /* - * Uh, oh. tty->count is 1, which means that the tty - * structure will be freed. state->count should always - * be one in these conditions. If it's greater than - * one, we've got real problems, since it means the - * serial port won't be shutdown. - */ - printk("rs_close: bad serial port count; tty->count is 1, " - "state->count is %d\n", state->count); - state->count = 1; - } - if (--state->count < 0) { - printk("rs_close: bad serial port count for ttys%d: %d\n", - info->line, state->count); - state->count = 0; - } - if (state->count) { - DBG_CNT("before DEC-2"); - local_irq_restore(flags); - return; - } - info->flags |= ASYNC_CLOSING; - /* - * Now we wait for the transmit buffer to clear; and we notify - * the line discipline to only process XON/XOFF characters. - */ - tty->closing = 1; - if (info->closing_wait != ASYNC_CLOSING_WAIT_NONE) - tty_wait_until_sent(tty, info->closing_wait); - /* - * At this point we stop accepting input. To do this, we - * disable the receive line status interrupts, and tell the - * interrupt driver to stop checking the data ready bit in the - * line status register. - */ - info->read_status_mask &= ~BD_SC_EMPTY; - if (info->flags & ASYNC_INITIALIZED) { - - idx = PORT_NUM(info->state->smc_scc_num); - if (info->state->smc_scc_num & NUM_IS_SCC) { - sccp = &pquicc->scc_regs[idx]; - sccp->scc_sccm &= ~UART_SCCM_RX; - sccp->scc_gsmr.w.low &= ~SCC_GSMRL_ENR; - } else { - smcp = &pquicc->smc_regs[idx]; - smcp->smc_smcm &= ~SMCM_RX; - smcp->smc_smcmr &= ~SMCMR_REN; - } - /* - * Before we drop DTR, make sure the UART transmitter - * has completely drained; this is especially - * important if there is a transmit FIFO! - */ - rs_360_wait_until_sent(tty, info->timeout); - } - shutdown(info); - rs_360_flush_buffer(tty); - tty_ldisc_flush(tty); - tty->closing = 0; - info->event = 0; - info->port.tty = NULL; - if (info->blocked_open) { - if (info->close_delay) { - msleep_interruptible(jiffies_to_msecs(info->close_delay)); - } - wake_up_interruptible(&info->open_wait); - } - info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); - wake_up_interruptible(&info->close_wait); - local_irq_restore(flags); -} - -/* - * rs_wait_until_sent() --- wait until the transmitter is empty - */ -static void rs_360_wait_until_sent(struct tty_struct *tty, int timeout) -{ - ser_info_t *info = (ser_info_t *)tty->driver_data; - unsigned long orig_jiffies, char_time; - /*int lsr;*/ - volatile QUICC_BD *bdp; - - if (serial_paranoia_check(info, tty->name, "rs_wait_until_sent")) - return; - -#ifdef maybe - if (info->state->type == PORT_UNKNOWN) - return; -#endif - - orig_jiffies = jiffies; - /* - * Set the check interval to be 1/5 of the estimated time to - * send a single character, and make it at least 1. The check - * interval should also be less than the timeout. - * - * Note: we have to use pretty tight timings here to satisfy - * the NIST-PCTS. - */ - char_time = 1; - if (timeout) - char_time = min(char_time, (unsigned long)timeout); -#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT - printk("In rs_wait_until_sent(%d) check=%lu...", timeout, char_time); - printk("jiff=%lu...", jiffies); -#endif - - /* We go through the loop at least once because we can't tell - * exactly when the last character exits the shifter. There can - * be at least two characters waiting to be sent after the buffers - * are empty. - */ - do { -#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT - printk("lsr = %d (jiff=%lu)...", lsr, jiffies); -#endif -/* current->counter = 0; make us low-priority */ - msleep_interruptible(jiffies_to_msecs(char_time)); - if (signal_pending(current)) - break; - if (timeout && (time_after(jiffies, orig_jiffies + timeout))) - break; - /* The 'tx_cur' is really the next buffer to send. We - * have to back up to the previous BD and wait for it - * to go. This isn't perfect, because all this indicates - * is the buffer is available. There are still characters - * in the CPM FIFO. - */ - bdp = info->tx_cur; - if (bdp == info->tx_bd_base) - bdp += (TX_NUM_FIFO-1); - else - bdp--; - } while (bdp->status & BD_SC_READY); - current->state = TASK_RUNNING; -#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT - printk("lsr = %d (jiff=%lu)...done\n", lsr, jiffies); -#endif -} - -/* - * rs_hangup() --- called by tty_hangup() when a hangup is signaled. - */ -static void rs_360_hangup(struct tty_struct *tty) -{ - ser_info_t *info = (ser_info_t *)tty->driver_data; - struct serial_state *state = info->state; - - if (serial_paranoia_check(info, tty->name, "rs_hangup")) - return; - - state = info->state; - - rs_360_flush_buffer(tty); - shutdown(info); - info->event = 0; - state->count = 0; - info->flags &= ~ASYNC_NORMAL_ACTIVE; - info->port.tty = NULL; - wake_up_interruptible(&info->open_wait); -} - -/* - * ------------------------------------------------------------ - * rs_open() and friends - * ------------------------------------------------------------ - */ -static int block_til_ready(struct tty_struct *tty, struct file * filp, - ser_info_t *info) -{ -#ifdef DO_THIS_LATER - DECLARE_WAITQUEUE(wait, current); -#endif - struct serial_state *state = info->state; - int retval; - int do_clocal = 0; - - /* - * If the device is in the middle of being closed, then block - * until it's done, and then try again. - */ - if (tty_hung_up_p(filp) || - (info->flags & ASYNC_CLOSING)) { - if (info->flags & ASYNC_CLOSING) - interruptible_sleep_on(&info->close_wait); -#ifdef SERIAL_DO_RESTART - if (info->flags & ASYNC_HUP_NOTIFY) - return -EAGAIN; - else - return -ERESTARTSYS; -#else - return -EAGAIN; -#endif - } - - /* - * If non-blocking mode is set, or the port is not enabled, - * then make the check up front and then exit. - * If this is an SMC port, we don't have modem control to wait - * for, so just get out here. - */ - if ((filp->f_flags & O_NONBLOCK) || - (tty->flags & (1 << TTY_IO_ERROR)) || - !(info->state->smc_scc_num & NUM_IS_SCC)) { - info->flags |= ASYNC_NORMAL_ACTIVE; - return 0; - } - - if (tty->termios->c_cflag & CLOCAL) - do_clocal = 1; - - /* - * Block waiting for the carrier detect and the line to become - * free (i.e., not in use by the callout). While we are in - * this loop, state->count is dropped by one, so that - * rs_close() knows when to free things. We restore it upon - * exit, either normal or abnormal. - */ - retval = 0; -#ifdef DO_THIS_LATER - add_wait_queue(&info->open_wait, &wait); -#ifdef SERIAL_DEBUG_OPEN - printk("block_til_ready before block: ttys%d, count = %d\n", - state->line, state->count); -#endif - local_irq_disable(); - if (!tty_hung_up_p(filp)) - state->count--; - local_irq_enable(); - info->blocked_open++; - while (1) { - local_irq_disable(); - if (tty->termios->c_cflag & CBAUD) - serial_out(info, UART_MCR, - serial_inp(info, UART_MCR) | - (UART_MCR_DTR | UART_MCR_RTS)); - local_irq_enable(); - set_current_state(TASK_INTERRUPTIBLE); - if (tty_hung_up_p(filp) || - !(info->flags & ASYNC_INITIALIZED)) { -#ifdef SERIAL_DO_RESTART - if (info->flags & ASYNC_HUP_NOTIFY) - retval = -EAGAIN; - else - retval = -ERESTARTSYS; -#else - retval = -EAGAIN; -#endif - break; - } - if (!(info->flags & ASYNC_CLOSING) && - (do_clocal || (serial_in(info, UART_MSR) & - UART_MSR_DCD))) - break; - if (signal_pending(current)) { - retval = -ERESTARTSYS; - break; - } -#ifdef SERIAL_DEBUG_OPEN - printk("block_til_ready blocking: ttys%d, count = %d\n", - info->line, state->count); -#endif - tty_unlock(); - schedule(); - tty_lock(); - } - current->state = TASK_RUNNING; - remove_wait_queue(&info->open_wait, &wait); - if (!tty_hung_up_p(filp)) - state->count++; - info->blocked_open--; -#ifdef SERIAL_DEBUG_OPEN - printk("block_til_ready after blocking: ttys%d, count = %d\n", - info->line, state->count); -#endif -#endif /* DO_THIS_LATER */ - if (retval) - return retval; - info->flags |= ASYNC_NORMAL_ACTIVE; - return 0; -} - -static int get_async_struct(int line, ser_info_t **ret_info) -{ - struct serial_state *sstate; - - sstate = rs_table + line; - if (sstate->info) { - sstate->count++; - *ret_info = (ser_info_t *)sstate->info; - return 0; - } - else { - return -ENOMEM; - } -} - -/* - * This routine is called whenever a serial port is opened. It - * enables interrupts for a serial port, linking in its async structure into - * the IRQ chain. It also performs the serial-specific - * initialization for the tty structure. - */ -static int rs_360_open(struct tty_struct *tty, struct file * filp) -{ - ser_info_t *info; - int retval, line; - - line = tty->index; - if ((line < 0) || (line >= NR_PORTS)) - return -ENODEV; - retval = get_async_struct(line, &info); - if (retval) - return retval; - if (serial_paranoia_check(info, tty->name, "rs_open")) - return -ENODEV; - -#ifdef SERIAL_DEBUG_OPEN - printk("rs_open %s, count = %d\n", tty->name, info->state->count); -#endif - tty->driver_data = info; - info->port.tty = tty; - - /* - * Start up serial port - */ - retval = startup(info); - if (retval) - return retval; - - retval = block_til_ready(tty, filp, info); - if (retval) { -#ifdef SERIAL_DEBUG_OPEN - printk("rs_open returning after block_til_ready with %d\n", - retval); -#endif - return retval; - } - -#ifdef SERIAL_DEBUG_OPEN - printk("rs_open %s successful...", tty->name); -#endif - return 0; -} - -/* - * /proc fs routines.... - */ - -static inline int line_info(char *buf, struct serial_state *state) -{ -#ifdef notdef - struct async_struct *info = state->info, scr_info; - char stat_buf[30], control, status; -#endif - int ret; - - ret = sprintf(buf, "%d: uart:%s port:%X irq:%d", - state->line, - (state->smc_scc_num & NUM_IS_SCC) ? "SCC" : "SMC", - (unsigned int)(state->port), state->irq); - - if (!state->port || (state->type == PORT_UNKNOWN)) { - ret += sprintf(buf+ret, "\n"); - return ret; - } - -#ifdef notdef - /* - * Figure out the current RS-232 lines - */ - if (!info) { - info = &scr_info; /* This is just for serial_{in,out} */ - - info->magic = SERIAL_MAGIC; - info->port = state->port; - info->flags = state->flags; - info->quot = 0; - info->port.tty = NULL; - } - local_irq_disable(); - status = serial_in(info, UART_MSR); - control = info ? info->MCR : serial_in(info, UART_MCR); - local_irq_enable(); - - stat_buf[0] = 0; - stat_buf[1] = 0; - if (control & UART_MCR_RTS) - strcat(stat_buf, "|RTS"); - if (status & UART_MSR_CTS) - strcat(stat_buf, "|CTS"); - if (control & UART_MCR_DTR) - strcat(stat_buf, "|DTR"); - if (status & UART_MSR_DSR) - strcat(stat_buf, "|DSR"); - if (status & UART_MSR_DCD) - strcat(stat_buf, "|CD"); - if (status & UART_MSR_RI) - strcat(stat_buf, "|RI"); - - if (info->quot) { - ret += sprintf(buf+ret, " baud:%d", - state->baud_base / info->quot); - } - - ret += sprintf(buf+ret, " tx:%d rx:%d", - state->icount.tx, state->icount.rx); - - if (state->icount.frame) - ret += sprintf(buf+ret, " fe:%d", state->icount.frame); - - if (state->icount.parity) - ret += sprintf(buf+ret, " pe:%d", state->icount.parity); - - if (state->icount.brk) - ret += sprintf(buf+ret, " brk:%d", state->icount.brk); - - if (state->icount.overrun) - ret += sprintf(buf+ret, " oe:%d", state->icount.overrun); - - /* - * Last thing is the RS-232 status lines - */ - ret += sprintf(buf+ret, " %s\n", stat_buf+1); -#endif - return ret; -} - -int rs_360_read_proc(char *page, char **start, off_t off, int count, - int *eof, void *data) -{ - int i, len = 0; - off_t begin = 0; - - len += sprintf(page, "serinfo:1.0 driver:%s\n", serial_version); - for (i = 0; i < NR_PORTS && len < 4000; i++) { - len += line_info(page + len, &rs_table[i]); - if (len+begin > off+count) - goto done; - if (len+begin < off) { - begin += len; - len = 0; - } - } - *eof = 1; -done: - if (off >= len+begin) - return 0; - *start = page + (begin-off); - return ((count < begin+len-off) ? count : begin+len-off); -} - -/* - * --------------------------------------------------------------------- - * rs_init() and friends - * - * rs_init() is called at boot-time to initialize the serial driver. - * --------------------------------------------------------------------- - */ - -/* - * This routine prints out the appropriate serial driver version - * number, and identifies which options were configured into this - * driver. - */ -static _INLINE_ void show_serial_version(void) -{ - printk(KERN_INFO "%s version %s\n", serial_name, serial_version); -} - - -/* - * The serial console driver used during boot. Note that these names - * clash with those found in "serial.c", so we currently can't support - * the 16xxx uarts and these at the same time. I will fix this to become - * an indirect function call from tty_io.c (or something). - */ - -#ifdef CONFIG_SERIAL_CONSOLE - -/* - * Print a string to the serial port trying not to disturb any possible - * real use of the port... - */ -static void my_console_write(int idx, const char *s, - unsigned count) -{ - struct serial_state *ser; - ser_info_t *info; - unsigned i; - QUICC_BD *bdp, *bdbase; - volatile struct smc_uart_pram *up; - volatile u_char *cp; - - ser = rs_table + idx; - - - /* If the port has been initialized for general use, we have - * to use the buffer descriptors allocated there. Otherwise, - * we simply use the single buffer allocated. - */ - if ((info = (ser_info_t *)ser->info) != NULL) { - bdp = info->tx_cur; - bdbase = info->tx_bd_base; - } - else { - /* Pointer to UART in parameter ram. - */ - /* up = (smc_uart_t *)&cpmp->cp_dparam[ser->port]; */ - up = &pquicc->pram[ser->port].scc.pothers.idma_smc.psmc.u; - - /* Get the address of the host memory buffer. - */ - bdp = bdbase = (QUICC_BD *)((uint)pquicc + (uint)up->tbase); - } - - /* - * We need to gracefully shut down the transmitter, disable - * interrupts, then send our bytes out. - */ - - /* - * Now, do each character. This is not as bad as it looks - * since this is a holding FIFO and not a transmitting FIFO. - * We could add the complexity of filling the entire transmit - * buffer, but we would just wait longer between accesses...... - */ - for (i = 0; i < count; i++, s++) { - /* Wait for transmitter fifo to empty. - * Ready indicates output is ready, and xmt is doing - * that, not that it is ready for us to send. - */ - while (bdp->status & BD_SC_READY); - - /* Send the character out. - */ - cp = bdp->buf; - *cp = *s; - - bdp->length = 1; - bdp->status |= BD_SC_READY; - - if (bdp->status & BD_SC_WRAP) - bdp = bdbase; - else - bdp++; - - /* if a LF, also do CR... */ - if (*s == 10) { - while (bdp->status & BD_SC_READY); - /* cp = __va(bdp->buf); */ - cp = bdp->buf; - *cp = 13; - bdp->length = 1; - bdp->status |= BD_SC_READY; - - if (bdp->status & BD_SC_WRAP) { - bdp = bdbase; - } - else { - bdp++; - } - } - } - - /* - * Finally, Wait for transmitter & holding register to empty - * and restore the IER - */ - while (bdp->status & BD_SC_READY); - - if (info) - info->tx_cur = (QUICC_BD *)bdp; -} - -static void serial_console_write(struct console *c, const char *s, - unsigned count) -{ -#ifdef CONFIG_KGDB - /* Try to let stub handle output. Returns true if it did. */ - if (kgdb_output_string(s, count)) - return; -#endif - my_console_write(c->index, s, count); -} - - - -/*void console_print_68360(const char *p) -{ - const char *cp = p; - int i; - - for (i=0;cp[i]!=0;i++); - - serial_console_write (p, i); - - //Comment this if you want to have a strict interrupt-driven output - //rs_fair_output(); - - return; -}*/ - - - - - - -#ifdef CONFIG_XMON -int -xmon_360_write(const char *s, unsigned count) -{ - my_console_write(0, s, count); - return(count); -} -#endif - -#ifdef CONFIG_KGDB -void -putDebugChar(char ch) -{ - my_console_write(0, &ch, 1); -} -#endif - -/* - * Receive character from the serial port. This only works well - * before the port is initialized for real use. - */ -static int my_console_wait_key(int idx, int xmon, char *obuf) -{ - struct serial_state *ser; - u_char c, *cp; - ser_info_t *info; - QUICC_BD *bdp; - volatile struct smc_uart_pram *up; - int i; - - ser = rs_table + idx; - - /* Get the address of the host memory buffer. - * If the port has been initialized for general use, we must - * use information from the port structure. - */ - if ((info = (ser_info_t *)ser->info)) - bdp = info->rx_cur; - else - /* bdp = (QUICC_BD *)&cpmp->cp_dpmem[up->smc_rbase]; */ - bdp = (QUICC_BD *)((uint)pquicc + (uint)up->tbase); - - /* Pointer to UART in parameter ram. - */ - /* up = (smc_uart_t *)&cpmp->cp_dparam[ser->port]; */ - up = &pquicc->pram[info->state->port].scc.pothers.idma_smc.psmc.u; - - /* - * We need to gracefully shut down the receiver, disable - * interrupts, then read the input. - * XMON just wants a poll. If no character, return -1, else - * return the character. - */ - if (!xmon) { - while (bdp->status & BD_SC_EMPTY); - } - else { - if (bdp->status & BD_SC_EMPTY) - return -1; - } - - cp = (char *)bdp->buf; - - if (obuf) { - i = c = bdp->length; - while (i-- > 0) - *obuf++ = *cp++; - } - else { - c = *cp; - } - bdp->status |= BD_SC_EMPTY; - - if (info) { - if (bdp->status & BD_SC_WRAP) { - bdp = info->rx_bd_base; - } - else { - bdp++; - } - info->rx_cur = (QUICC_BD *)bdp; - } - - return((int)c); -} - -static int serial_console_wait_key(struct console *co) -{ - return(my_console_wait_key(co->index, 0, NULL)); -} - -#ifdef CONFIG_XMON -int -xmon_360_read_poll(void) -{ - return(my_console_wait_key(0, 1, NULL)); -} - -int -xmon_360_read_char(void) -{ - return(my_console_wait_key(0, 0, NULL)); -} -#endif - -#ifdef CONFIG_KGDB -static char kgdb_buf[RX_BUF_SIZE], *kgdp; -static int kgdb_chars; - -unsigned char -getDebugChar(void) -{ - if (kgdb_chars <= 0) { - kgdb_chars = my_console_wait_key(0, 0, kgdb_buf); - kgdp = kgdb_buf; - } - kgdb_chars--; - - return(*kgdp++); -} - -void kgdb_interruptible(int state) -{ -} -void kgdb_map_scc(void) -{ - struct serial_state *ser; - uint mem_addr; - volatile QUICC_BD *bdp; - volatile smc_uart_t *up; - - cpmp = (cpm360_t *)&(((immap_t *)IMAP_ADDR)->im_cpm); - - /* To avoid data cache CPM DMA coherency problems, allocate a - * buffer in the CPM DPRAM. This will work until the CPM and - * serial ports are initialized. At that time a memory buffer - * will be allocated. - * The port is already initialized from the boot procedure, all - * we do here is give it a different buffer and make it a FIFO. - */ - - ser = rs_table; - - /* Right now, assume we are using SMCs. - */ - up = (smc_uart_t *)&cpmp->cp_dparam[ser->port]; - - /* Allocate space for an input FIFO, plus a few bytes for output. - * Allocate bytes to maintain word alignment. - */ - mem_addr = (uint)(&cpmp->cp_dpmem[0x1000]); - - /* Set the physical address of the host memory buffers in - * the buffer descriptors. - */ - bdp = (QUICC_BD *)&cpmp->cp_dpmem[up->smc_rbase]; - bdp->buf = mem_addr; - - bdp = (QUICC_BD *)&cpmp->cp_dpmem[up->smc_tbase]; - bdp->buf = mem_addr+RX_BUF_SIZE; - - up->smc_mrblr = RX_BUF_SIZE; /* receive buffer length */ - up->smc_maxidl = RX_BUF_SIZE; -} -#endif - -static struct tty_struct *serial_console_device(struct console *c, int *index) -{ - *index = c->index; - return serial_driver; -} - - -struct console sercons = { - .name = "ttyS", - .write = serial_console_write, - .device = serial_console_device, - .wait_key = serial_console_wait_key, - .setup = serial_console_setup, - .flags = CON_PRINTBUFFER, - .index = CONFIG_SERIAL_CONSOLE_PORT, -}; - - - -/* - * Register console. - */ -long console_360_init(long kmem_start, long kmem_end) -{ - register_console(&sercons); - /*register_console (console_print_68360); - 2.0.38 only required a write - function pointer. */ - return kmem_start; -} - -#endif - -/* Index in baud rate table of the default console baud rate. -*/ -static int baud_idx; - -static const struct tty_operations rs_360_ops = { - .owner = THIS_MODULE, - .open = rs_360_open, - .close = rs_360_close, - .write = rs_360_write, - .put_char = rs_360_put_char, - .write_room = rs_360_write_room, - .chars_in_buffer = rs_360_chars_in_buffer, - .flush_buffer = rs_360_flush_buffer, - .ioctl = rs_360_ioctl, - .throttle = rs_360_throttle, - .unthrottle = rs_360_unthrottle, - /* .send_xchar = rs_360_send_xchar, */ - .set_termios = rs_360_set_termios, - .stop = rs_360_stop, - .start = rs_360_start, - .hangup = rs_360_hangup, - /* .wait_until_sent = rs_360_wait_until_sent, */ - /* .read_proc = rs_360_read_proc, */ - .tiocmget = rs_360_tiocmget, - .tiocmset = rs_360_tiocmset, - .get_icount = rs_360_get_icount, -}; - -static int __init rs_360_init(void) -{ - struct serial_state * state; - ser_info_t *info; - void *mem_addr; - uint dp_addr, iobits; - int i, j, idx; - ushort chan; - QUICC_BD *bdp; - volatile QUICC *cp; - volatile struct smc_regs *sp; - volatile struct smc_uart_pram *up; - volatile struct scc_regs *scp; - volatile struct uart_pram *sup; - /* volatile immap_t *immap; */ - - serial_driver = alloc_tty_driver(NR_PORTS); - if (!serial_driver) - return -1; - - show_serial_version(); - - serial_driver->name = "ttyS"; - serial_driver->major = TTY_MAJOR; - serial_driver->minor_start = 64; - serial_driver->type = TTY_DRIVER_TYPE_SERIAL; - serial_driver->subtype = SERIAL_TYPE_NORMAL; - serial_driver->init_termios = tty_std_termios; - serial_driver->init_termios.c_cflag = - baud_idx | CS8 | CREAD | HUPCL | CLOCAL; - serial_driver->flags = TTY_DRIVER_REAL_RAW; - tty_set_operations(serial_driver, &rs_360_ops); - - if (tty_register_driver(serial_driver)) - panic("Couldn't register serial driver\n"); - - cp = pquicc; /* Get pointer to Communication Processor */ - /* immap = (immap_t *)IMAP_ADDR; */ /* and to internal registers */ - - - /* Configure SCC2, SCC3, and SCC4 instead of port A parallel I/O. - */ - /* The "standard" configuration through the 860. - */ -/* immap->im_ioport.iop_papar |= 0x00fc; */ -/* immap->im_ioport.iop_padir &= ~0x00fc; */ -/* immap->im_ioport.iop_paodr &= ~0x00fc; */ - cp->pio_papar |= 0x00fc; - cp->pio_padir &= ~0x00fc; - /* cp->pio_paodr &= ~0x00fc; */ - - - /* Since we don't yet do modem control, connect the port C pins - * as general purpose I/O. This will assert CTS and CD for the - * SCC ports. - */ - /* FIXME: see 360um p.7-365 and 860um p.34-12 - * I can't make sense of these bits - mleslie*/ -/* immap->im_ioport.iop_pcdir |= 0x03c6; */ -/* immap->im_ioport.iop_pcpar &= ~0x03c6; */ - -/* cp->pio_pcdir |= 0x03c6; */ -/* cp->pio_pcpar &= ~0x03c6; */ - - - - /* Connect SCC2 and SCC3 to NMSI. Connect BRG3 to SCC2 and - * BRG4 to SCC3. - */ - cp->si_sicr &= ~0x00ffff00; - cp->si_sicr |= 0x001b1200; - -#ifdef CONFIG_PP04 - /* Frequentis PP04 forced to RS-232 until we know better. - * Port C 12 and 13 low enables RS-232 on SCC3 and SCC4. - */ - immap->im_ioport.iop_pcdir |= 0x000c; - immap->im_ioport.iop_pcpar &= ~0x000c; - immap->im_ioport.iop_pcdat &= ~0x000c; - - /* This enables the TX driver. - */ - cp->cp_pbpar &= ~0x6000; - cp->cp_pbdat &= ~0x6000; -#endif - - for (i = 0, state = rs_table; i < NR_PORTS; i++,state++) { - state->magic = SSTATE_MAGIC; - state->line = i; - state->type = PORT_UNKNOWN; - state->custom_divisor = 0; - state->close_delay = 5*HZ/10; - state->closing_wait = 30*HZ; - state->icount.cts = state->icount.dsr = - state->icount.rng = state->icount.dcd = 0; - state->icount.rx = state->icount.tx = 0; - state->icount.frame = state->icount.parity = 0; - state->icount.overrun = state->icount.brk = 0; - printk(KERN_INFO "ttyS%d at irq 0x%02x is an %s\n", - i, (unsigned int)(state->irq), - (state->smc_scc_num & NUM_IS_SCC) ? "SCC" : "SMC"); - -#ifdef CONFIG_SERIAL_CONSOLE - /* If we just printed the message on the console port, and - * we are about to initialize it for general use, we have - * to wait a couple of character times for the CR/NL to - * make it out of the transmit buffer. - */ - if (i == CONFIG_SERIAL_CONSOLE_PORT) - mdelay(8); - - -/* idx = PORT_NUM(info->state->smc_scc_num); */ -/* if (info->state->smc_scc_num & NUM_IS_SCC) */ -/* chan = scc_chan_map[idx]; */ -/* else */ -/* chan = smc_chan_map[idx]; */ - -/* cp->cp_cr = mk_cr_cmd(chan, CPM_CR_STOP_TX) | CPM_CR_FLG; */ -/* while (cp->cp_cr & CPM_CR_FLG); */ - -#endif - /* info = kmalloc(sizeof(ser_info_t), GFP_KERNEL); */ - info = &quicc_ser_info[i]; - if (info) { - memset (info, 0, sizeof(ser_info_t)); - info->magic = SERIAL_MAGIC; - info->line = i; - info->flags = state->flags; - INIT_WORK(&info->tqueue, do_softint, info); - INIT_WORK(&info->tqueue_hangup, do_serial_hangup, info); - init_waitqueue_head(&info->open_wait); - init_waitqueue_head(&info->close_wait); - info->state = state; - state->info = (struct async_struct *)info; - - /* We need to allocate a transmit and receive buffer - * descriptors from dual port ram, and a character - * buffer area from host mem. - */ - dp_addr = m360_cpm_dpalloc(sizeof(QUICC_BD) * RX_NUM_FIFO); - - /* Allocate space for FIFOs in the host memory. - * (for now this is from a static array of buffers :( - */ - /* mem_addr = m360_cpm_hostalloc(RX_NUM_FIFO * RX_BUF_SIZE); */ - /* mem_addr = kmalloc (RX_NUM_FIFO * RX_BUF_SIZE, GFP_BUFFER); */ - mem_addr = &rx_buf_pool[i * RX_NUM_FIFO * RX_BUF_SIZE]; - - /* Set the physical address of the host memory - * buffers in the buffer descriptors, and the - * virtual address for us to work with. - */ - bdp = (QUICC_BD *)((uint)pquicc + dp_addr); - info->rx_cur = info->rx_bd_base = bdp; - - /* initialize rx buffer descriptors */ - for (j=0; j<(RX_NUM_FIFO-1); j++) { - bdp->buf = &rx_buf_pool[(i * RX_NUM_FIFO + j ) * RX_BUF_SIZE]; - bdp->status = BD_SC_EMPTY | BD_SC_INTRPT; - mem_addr += RX_BUF_SIZE; - bdp++; - } - bdp->buf = &rx_buf_pool[(i * RX_NUM_FIFO + j ) * RX_BUF_SIZE]; - bdp->status = BD_SC_WRAP | BD_SC_EMPTY | BD_SC_INTRPT; - - - idx = PORT_NUM(info->state->smc_scc_num); - if (info->state->smc_scc_num & NUM_IS_SCC) { - -#if defined (CONFIG_UCQUICC) && 1 - /* set the transceiver mode to RS232 */ - sipex_mode_bits &= ~(uint)SIPEX_MODE(idx,0x0f); /* clear current mode */ - sipex_mode_bits |= (uint)SIPEX_MODE(idx,0x02); - *(uint *)_periph_base = sipex_mode_bits; - /* printk ("sipex bits = 0x%08x\n", sipex_mode_bits); */ -#endif - } - - dp_addr = m360_cpm_dpalloc(sizeof(QUICC_BD) * TX_NUM_FIFO); - - /* Allocate space for FIFOs in the host memory. - */ - /* mem_addr = m360_cpm_hostalloc(TX_NUM_FIFO * TX_BUF_SIZE); */ - /* mem_addr = kmalloc (TX_NUM_FIFO * TX_BUF_SIZE, GFP_BUFFER); */ - mem_addr = &tx_buf_pool[i * TX_NUM_FIFO * TX_BUF_SIZE]; - - /* Set the physical address of the host memory - * buffers in the buffer descriptors, and the - * virtual address for us to work with. - */ - /* bdp = (QUICC_BD *)&cp->cp_dpmem[dp_addr]; */ - bdp = (QUICC_BD *)((uint)pquicc + dp_addr); - info->tx_cur = info->tx_bd_base = (QUICC_BD *)bdp; - - /* initialize tx buffer descriptors */ - for (j=0; j<(TX_NUM_FIFO-1); j++) { - bdp->buf = &tx_buf_pool[(i * TX_NUM_FIFO + j ) * TX_BUF_SIZE]; - bdp->status = BD_SC_INTRPT; - mem_addr += TX_BUF_SIZE; - bdp++; - } - bdp->buf = &tx_buf_pool[(i * TX_NUM_FIFO + j ) * TX_BUF_SIZE]; - bdp->status = (BD_SC_WRAP | BD_SC_INTRPT); - - if (info->state->smc_scc_num & NUM_IS_SCC) { - scp = &pquicc->scc_regs[idx]; - sup = &pquicc->pram[info->state->port].scc.pscc.u; - sup->rbase = dp_addr; - sup->tbase = dp_addr; - - /* Set up the uart parameters in the - * parameter ram. - */ - sup->rfcr = SMC_EB; - sup->tfcr = SMC_EB; - - /* Set this to 1 for now, so we get single - * character interrupts. Using idle character - * time requires some additional tuning. - */ - sup->mrblr = 1; - sup->max_idl = 0; - sup->brkcr = 1; - sup->parec = 0; - sup->frmer = 0; - sup->nosec = 0; - sup->brkec = 0; - sup->uaddr1 = 0; - sup->uaddr2 = 0; - sup->toseq = 0; - { - int i; - for (i=0;i<8;i++) - sup->cc[i] = 0x8000; - } - sup->rccm = 0xc0ff; - - /* Send the CPM an initialize command. - */ - chan = scc_chan_map[idx]; - - /* execute the INIT RX & TX PARAMS command for this channel. */ - cp->cp_cr = mk_cr_cmd(chan, CPM_CR_INIT_TRX) | CPM_CR_FLG; - while (cp->cp_cr & CPM_CR_FLG); - - /* Set UART mode, 8 bit, no parity, one stop. - * Enable receive and transmit. - */ - scp->scc_gsmr.w.high = 0; - scp->scc_gsmr.w.low = - (SCC_GSMRL_MODE_UART | SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16); - - /* Disable all interrupts and clear all pending - * events. - */ - scp->scc_sccm = 0; - scp->scc_scce = 0xffff; - scp->scc_dsr = 0x7e7e; - scp->scc_psmr = 0x3000; - - /* If the port is the console, enable Rx and Tx. - */ -#ifdef CONFIG_SERIAL_CONSOLE - if (i == CONFIG_SERIAL_CONSOLE_PORT) - scp->scc_gsmr.w.low |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT); -#endif - } - else { - /* Configure SMCs Tx/Rx instead of port B - * parallel I/O. - */ - up = &pquicc->pram[info->state->port].scc.pothers.idma_smc.psmc.u; - up->rbase = dp_addr; - - iobits = 0xc0 << (idx * 4); - cp->pip_pbpar |= iobits; - cp->pip_pbdir &= ~iobits; - cp->pip_pbodr &= ~iobits; - - - /* Connect the baud rate generator to the - * SMC based upon index in rs_table. Also - * make sure it is connected to NMSI. - */ - cp->si_simode &= ~(0xffff << (idx * 16)); - cp->si_simode |= (i << ((idx * 16) + 12)); - - up->tbase = dp_addr; - - /* Set up the uart parameters in the - * parameter ram. - */ - up->rfcr = SMC_EB; - up->tfcr = SMC_EB; - - /* Set this to 1 for now, so we get single - * character interrupts. Using idle character - * time requires some additional tuning. - */ - up->mrblr = 1; - up->max_idl = 0; - up->brkcr = 1; - - /* Send the CPM an initialize command. - */ - chan = smc_chan_map[idx]; - - cp->cp_cr = mk_cr_cmd(chan, - CPM_CR_INIT_TRX) | CPM_CR_FLG; -#ifdef CONFIG_SERIAL_CONSOLE - if (i == CONFIG_SERIAL_CONSOLE_PORT) - printk(""); -#endif - while (cp->cp_cr & CPM_CR_FLG); - - /* Set UART mode, 8 bit, no parity, one stop. - * Enable receive and transmit. - */ - sp = &cp->smc_regs[idx]; - sp->smc_smcmr = smcr_mk_clen(9) | SMCMR_SM_UART; - - /* Disable all interrupts and clear all pending - * events. - */ - sp->smc_smcm = 0; - sp->smc_smce = 0xff; - - /* If the port is the console, enable Rx and Tx. - */ -#ifdef CONFIG_SERIAL_CONSOLE - if (i == CONFIG_SERIAL_CONSOLE_PORT) - sp->smc_smcmr |= SMCMR_REN | SMCMR_TEN; -#endif - } - - /* Install interrupt handler. - */ - /* cpm_install_handler(IRQ_MACHSPEC | state->irq, rs_360_interrupt, info); */ - /*request_irq(IRQ_MACHSPEC | state->irq, rs_360_interrupt, */ - request_irq(state->irq, rs_360_interrupt, 0, "ttyS", - (void *)info); - - /* Set up the baud rate generator. - */ - m360_cpm_setbrg(i, baud_table[baud_idx]); - - } - } - - return 0; -} -module_init(rs_360_init); - -/* This must always be called before the rs_360_init() function, otherwise - * it blows away the port control information. - */ -//static int __init serial_console_setup( struct console *co, char *options) -int serial_console_setup( struct console *co, char *options) -{ - struct serial_state *ser; - uint mem_addr, dp_addr, bidx, idx, iobits; - ushort chan; - QUICC_BD *bdp; - volatile QUICC *cp; - volatile struct smc_regs *sp; - volatile struct scc_regs *scp; - volatile struct smc_uart_pram *up; - volatile struct uart_pram *sup; - -/* mleslie TODO: - * add something to the 68k bootloader to store a desired initial console baud rate */ - -/* bd_t *bd; */ /* a board info struct used by EPPC-bug */ -/* bd = (bd_t *)__res; */ - - for (bidx = 0; bidx < (sizeof(baud_table) / sizeof(int)); bidx++) - /* if (bd->bi_baudrate == baud_table[bidx]) */ - if (CONSOLE_BAUDRATE == baud_table[bidx]) - break; - - /* co->cflag = CREAD|CLOCAL|bidx|CS8; */ - baud_idx = bidx; - - ser = rs_table + CONFIG_SERIAL_CONSOLE_PORT; - - cp = pquicc; /* Get pointer to Communication Processor */ - - idx = PORT_NUM(ser->smc_scc_num); - if (ser->smc_scc_num & NUM_IS_SCC) { - - /* TODO: need to set up SCC pin assignment etc. here */ - - } - else { - iobits = 0xc0 << (idx * 4); - cp->pip_pbpar |= iobits; - cp->pip_pbdir &= ~iobits; - cp->pip_pbodr &= ~iobits; - - /* Connect the baud rate generator to the - * SMC based upon index in rs_table. Also - * make sure it is connected to NMSI. - */ - cp->si_simode &= ~(0xffff << (idx * 16)); - cp->si_simode |= (idx << ((idx * 16) + 12)); - } - - /* When we get here, the CPM has been reset, so we need - * to configure the port. - * We need to allocate a transmit and receive buffer descriptor - * from dual port ram, and a character buffer area from host mem. - */ - - /* Allocate space for two buffer descriptors in the DP ram. - */ - dp_addr = m360_cpm_dpalloc(sizeof(QUICC_BD) * CONSOLE_NUM_FIFO); - - /* Allocate space for two 2 byte FIFOs in the host memory. - */ - /* mem_addr = m360_cpm_hostalloc(8); */ - mem_addr = (uint)console_fifos; - - - /* Set the physical address of the host memory buffers in - * the buffer descriptors. - */ - /* bdp = (QUICC_BD *)&cp->cp_dpmem[dp_addr]; */ - bdp = (QUICC_BD *)((uint)pquicc + dp_addr); - bdp->buf = (char *)mem_addr; - (bdp+1)->buf = (char *)(mem_addr+4); - - /* For the receive, set empty and wrap. - * For transmit, set wrap. - */ - bdp->status = BD_SC_EMPTY | BD_SC_WRAP; - (bdp+1)->status = BD_SC_WRAP; - - /* Set up the uart parameters in the parameter ram. - */ - if (ser->smc_scc_num & NUM_IS_SCC) { - scp = &cp->scc_regs[idx]; - /* sup = (scc_uart_t *)&cp->cp_dparam[ser->port]; */ - sup = &pquicc->pram[ser->port].scc.pscc.u; - - sup->rbase = dp_addr; - sup->tbase = dp_addr + sizeof(QUICC_BD); - - /* Set up the uart parameters in the - * parameter ram. - */ - sup->rfcr = SMC_EB; - sup->tfcr = SMC_EB; - - /* Set this to 1 for now, so we get single - * character interrupts. Using idle character - * time requires some additional tuning. - */ - sup->mrblr = 1; - sup->max_idl = 0; - sup->brkcr = 1; - sup->parec = 0; - sup->frmer = 0; - sup->nosec = 0; - sup->brkec = 0; - sup->uaddr1 = 0; - sup->uaddr2 = 0; - sup->toseq = 0; - { - int i; - for (i=0;i<8;i++) - sup->cc[i] = 0x8000; - } - sup->rccm = 0xc0ff; - - /* Send the CPM an initialize command. - */ - chan = scc_chan_map[idx]; - - cp->cp_cr = mk_cr_cmd(chan, CPM_CR_INIT_TRX) | CPM_CR_FLG; - while (cp->cp_cr & CPM_CR_FLG); - - /* Set UART mode, 8 bit, no parity, one stop. - * Enable receive and transmit. - */ - scp->scc_gsmr.w.high = 0; - scp->scc_gsmr.w.low = - (SCC_GSMRL_MODE_UART | SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16); - - /* Disable all interrupts and clear all pending - * events. - */ - scp->scc_sccm = 0; - scp->scc_scce = 0xffff; - scp->scc_dsr = 0x7e7e; - scp->scc_psmr = 0x3000; - - scp->scc_gsmr.w.low |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT); - - } - else { - /* up = (smc_uart_t *)&cp->cp_dparam[ser->port]; */ - up = &pquicc->pram[ser->port].scc.pothers.idma_smc.psmc.u; - - up->rbase = dp_addr; /* Base of receive buffer desc. */ - up->tbase = dp_addr+sizeof(QUICC_BD); /* Base of xmt buffer desc. */ - up->rfcr = SMC_EB; - up->tfcr = SMC_EB; - - /* Set this to 1 for now, so we get single character interrupts. - */ - up->mrblr = 1; /* receive buffer length */ - up->max_idl = 0; /* wait forever for next char */ - - /* Send the CPM an initialize command. - */ - chan = smc_chan_map[idx]; - cp->cp_cr = mk_cr_cmd(chan, CPM_CR_INIT_TRX) | CPM_CR_FLG; - while (cp->cp_cr & CPM_CR_FLG); - - /* Set UART mode, 8 bit, no parity, one stop. - * Enable receive and transmit. - */ - sp = &cp->smc_regs[idx]; - sp->smc_smcmr = smcr_mk_clen(9) | SMCMR_SM_UART; - - /* And finally, enable Rx and Tx. - */ - sp->smc_smcmr |= SMCMR_REN | SMCMR_TEN; - } - - /* Set up the baud rate generator. - */ - /* m360_cpm_setbrg((ser - rs_table), bd->bi_baudrate); */ - m360_cpm_setbrg((ser - rs_table), CONSOLE_BAUDRATE); - - return 0; -} - -/* - * Local variables: - * c-indent-level: 4 - * c-basic-offset: 4 - * tab-width: 4 - * End: - */ diff --git a/drivers/staging/serial/Kconfig b/drivers/staging/serial/Kconfig deleted file mode 100644 index 9489688397e..00000000000 --- a/drivers/staging/serial/Kconfig +++ /dev/null @@ -1,16 +0,0 @@ -config SERIAL_68360_SMC - bool "68360 SMC uart support" - depends on M68360 - help - This driver supports the SMC serial ports of the Motorola 68360 CPU. - -config SERIAL_68360_SCC - bool "68360 SCC uart support" - depends on M68360 - help - This driver supports the SCC serial ports of the Motorola 68360 CPU. - -config SERIAL_68360 - bool - depends on SERIAL_68360_SMC || SERIAL_68360_SCC - default y diff --git a/drivers/staging/serial/Makefile b/drivers/staging/serial/Makefile deleted file mode 100644 index 37a6a0b35fb..00000000000 --- a/drivers/staging/serial/Makefile +++ /dev/null @@ -1 +0,0 @@ -obj-$(CONFIG_SERIAL_68360) += 68360serial.o diff --git a/drivers/staging/serial/TODO b/drivers/staging/serial/TODO deleted file mode 100644 index a19cda81dab..00000000000 --- a/drivers/staging/serial/TODO +++ /dev/null @@ -1,6 +0,0 @@ -These are a few serial drivers that either do not build, or do not work if they -do build, or if they seem to work, are for obsolete hardware, or are full of -unfixable races and no one uses them anymore. - -If no one steps up to adopt any of these drivers, they will be removed -in the 3.4 release. diff --git a/drivers/staging/serqt_usb2/serqt_usb2.c b/drivers/staging/serqt_usb2/serqt_usb2.c index ae1d815e2a5..0ec83aacee7 100644 --- a/drivers/staging/serqt_usb2/serqt_usb2.c +++ b/drivers/staging/serqt_usb2/serqt_usb2.c @@ -1559,8 +1559,9 @@ static void qt_unthrottle(struct tty_struct *tty) qt_read_bulk_callback, port); result = usb_submit_urb(port->read_urb, GFP_ATOMIC); if (result) - err("%s - failed restarting read urb, error %d", - __func__, result); + dev_err(&port->dev, + "%s - failed restarting read urb, error %d\n", + __func__, result); } } mutex_unlock(&qt_port->lock); diff --git a/drivers/staging/sm7xx/smtcfb.c b/drivers/staging/sm7xx/smtcfb.c index 83c582ed12e..746c4cd5d30 100644 --- a/drivers/staging/sm7xx/smtcfb.c +++ b/drivers/staging/sm7xx/smtcfb.c @@ -2,31 +2,19 @@ * Silicon Motion SM7XX frame buffer device * * Copyright (C) 2006 Silicon Motion Technology Corp. - * Authors: Ge Wang, gewang@siliconmotion.com - * Boyod boyod.yang@siliconmotion.com.cn + * Authors: Ge Wang, gewang@siliconmotion.com + * Boyod boyod.yang@siliconmotion.com.cn * * Copyright (C) 2009 Lemote, Inc. - * Author: Wu Zhangjin, wuzhangjin@gmail.com + * Author: Wu Zhangjin, wuzhangjin@gmail.com * * Copyright (C) 2011 Igalia, S.L. - * Author: Javier M. Mellid <jmunhoz@igalia.com> + * Author: Javier M. Mellid <jmunhoz@igalia.com> * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive for - * more details. + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive for + * more details. * - * Version 0.10.26192.21.01 - * - Add PowerPC/Big endian support - * - Verified on 2.6.19.2 - * Boyod.yang <boyod.yang@siliconmotion.com.cn> - * - * Version 0.09.2621.00.01 - * - Only support Linux Kernel's version 2.6.21 - * Boyod.yang <boyod.yang@siliconmotion.com.cn> - * - * Version 0.09 - * - Only support Linux Kernel's version 2.6.12 - * Boyod.yang <boyod.yang@siliconmotion.com.cn> */ #include <linux/io.h> @@ -45,40 +33,19 @@ #include "smtcfb.h" -#ifdef DEBUG -#define smdbg(format, arg...) printk(KERN_DEBUG format , ## arg) -#else -#define smdbg(format, arg...) -#endif - struct screen_info smtc_screen_info; /* * Private structure */ struct smtcfb_info { - /* - * The following is a pointer to be passed into the - * functions below. The modules outside the main - * voyager.c driver have no knowledge as to what - * is within this structure. - */ struct fb_info fb; - struct display_switch *dispsw; - struct pci_dev *dev; - signed int currcon; - + struct pci_dev *pdev; struct { u8 red, green, blue; } palette[NR_RGB]; - u_int palette_size; -}; -struct par_info { - /* - * Hardware - */ u16 chipID; unsigned char __iomem *m_pMMIO; char __iomem *m_pLFB; @@ -121,15 +88,6 @@ char __iomem *smtc_RegBaseAddress; /* Memory Map IO starting address */ char __iomem *smtc_VRAMBaseAddress; /* video memory starting address */ static u32 colreg[17]; -static struct par_info hw; /* hardware information */ - -u16 smtc_ChipIDs[] = { - 0x710, - 0x712, - 0x720 -}; - -#define numSMTCchipIDs ARRAY_SIZE(smtc_ChipIDs) static struct fb_var_screeninfo smtcfb_var = { .xres = 1024, @@ -154,30 +112,29 @@ static struct fb_fix_screeninfo smtcfb_fix = { .accel = FB_ACCEL_SMI_LYNX, }; -static void sm712_set_timing(struct smtcfb_info *sfb, - struct par_info *ppar_info) +static void sm712_set_timing(struct smtcfb_info *sfb) { int i = 0, j = 0; u32 m_nScreenStride; - smdbg("\nppar_info->width = %d ppar_info->height = %d" - "sfb->fb.var.bits_per_pixel = %d ppar_info->hz = %d\n", - ppar_info->width, ppar_info->height, - sfb->fb.var.bits_per_pixel, ppar_info->hz); + dev_dbg(&sfb->pdev->dev, + "sfb->width=%d sfb->height=%d " + "sfb->fb.var.bits_per_pixel=%d sfb->hz=%d\n", + sfb->width, sfb->height, sfb->fb.var.bits_per_pixel, sfb->hz); for (j = 0; j < numVGAModes; j++) { - if (VGAMode[j].mmSizeX == ppar_info->width && - VGAMode[j].mmSizeY == ppar_info->height && + if (VGAMode[j].mmSizeX == sfb->width && + VGAMode[j].mmSizeY == sfb->height && VGAMode[j].bpp == sfb->fb.var.bits_per_pixel && - VGAMode[j].hz == ppar_info->hz) { + VGAMode[j].hz == sfb->hz) { - smdbg("\nVGAMode[j].mmSizeX = %d VGAMode[j].mmSizeY =" - "%d VGAMode[j].bpp = %d" - "VGAMode[j].hz=%d\n", - VGAMode[j].mmSizeX, VGAMode[j].mmSizeY, - VGAMode[j].bpp, VGAMode[j].hz); + dev_dbg(&sfb->pdev->dev, + "VGAMode[j].mmSizeX=%d VGAMode[j].mmSizeY=%d " + "VGAMode[j].bpp=%d VGAMode[j].hz=%d\n", + VGAMode[j].mmSizeX, VGAMode[j].mmSizeY, + VGAMode[j].bpp, VGAMode[j].hz); - smdbg("VGAMode index=%d\n", j); + dev_dbg(&sfb->pdev->dev, "VGAMode index=%d\n", j); smtc_mmiowb(0x0, 0x3c6); @@ -238,37 +195,37 @@ static void sm712_set_timing(struct smtcfb_info *sfb, smtc_mmiowb(0x67, 0x3c2); /* set VPR registers */ - writel(0x0, ppar_info->m_pVPR + 0x0C); - writel(0x0, ppar_info->m_pVPR + 0x40); + writel(0x0, sfb->m_pVPR + 0x0C); + writel(0x0, sfb->m_pVPR + 0x40); /* set data width */ m_nScreenStride = - (ppar_info->width * sfb->fb.var.bits_per_pixel) / 64; + (sfb->width * sfb->fb.var.bits_per_pixel) / 64; switch (sfb->fb.var.bits_per_pixel) { case 8: - writel(0x0, ppar_info->m_pVPR + 0x0); + writel(0x0, sfb->m_pVPR + 0x0); break; case 16: - writel(0x00020000, ppar_info->m_pVPR + 0x0); + writel(0x00020000, sfb->m_pVPR + 0x0); break; case 24: - writel(0x00040000, ppar_info->m_pVPR + 0x0); + writel(0x00040000, sfb->m_pVPR + 0x0); break; case 32: - writel(0x00030000, ppar_info->m_pVPR + 0x0); + writel(0x00030000, sfb->m_pVPR + 0x0); break; } writel((u32) (((m_nScreenStride + 2) << 16) | m_nScreenStride), - ppar_info->m_pVPR + 0x10); + sfb->m_pVPR + 0x10); } static void sm712_setpalette(int regno, unsigned red, unsigned green, unsigned blue, struct fb_info *info) { - struct par_info *cur_par = (struct par_info *)info->par; + struct smtcfb_info *sfb = info->par; - if (cur_par->BaseAddressInVRAM) + if (sfb->BaseAddressInVRAM) /* * second display palette for dual head. Enable CRT RAM, 6-bit * RAM @@ -283,14 +240,13 @@ static void sm712_setpalette(int regno, unsigned red, unsigned green, smtc_mmiowb(blue >> 10, dac_val); } -static void smtc_set_timing(struct smtcfb_info *sfb, struct par_info - *ppar_info) +static void smtc_set_timing(struct smtcfb_info *sfb) { - switch (ppar_info->chipID) { + switch (sfb->chipID) { case 0x710: case 0x712: case 0x720: - sm712_set_timing(sfb, ppar_info); + sm712_set_timing(sfb); break; } } @@ -310,7 +266,7 @@ static inline unsigned int chan_to_field(unsigned int chan, return chan << bf->offset; } -static int cfb_blank(int blank_mode, struct fb_info *info) +static int smtc_blank(int blank_mode, struct fb_info *info) { /* clear DPMS setting */ switch (blank_mode) { @@ -660,10 +616,10 @@ void smtcfb_setmode(struct smtcfb_info *sfb) break; } - hw.width = sfb->fb.var.xres; - hw.height = sfb->fb.var.yres; - hw.hz = 60; - smtc_set_timing(sfb, &hw); + sfb->width = sfb->fb.var.xres; + sfb->height = sfb->fb.var.yres; + sfb->hz = 60; + smtc_set_timing(sfb); } static int smtc_check_var(struct fb_var_screeninfo *var, struct fb_info *info) @@ -697,7 +653,7 @@ static struct fb_ops smtcfb_ops = { .fb_check_var = smtc_check_var, .fb_set_par = smtc_set_par, .fb_setcolreg = smtc_setcolreg, - .fb_blank = cfb_blank, + .fb_blank = smtc_blank, .fb_fillrect = cfb_fillrect, .fb_imageblit = cfb_imageblit, .fb_copyarea = cfb_copyarea, @@ -710,8 +666,7 @@ static struct fb_ops smtcfb_ops = { /* * Alloc struct smtcfb_info and assign the default value */ -static struct smtcfb_info *smtc_alloc_fb_info(struct pci_dev *dev, - char *name) +static struct smtcfb_info *smtc_alloc_fb_info(struct pci_dev *pdev, char *name) { struct smtcfb_info *sfb; @@ -720,8 +675,7 @@ static struct smtcfb_info *smtc_alloc_fb_info(struct pci_dev *dev, if (!sfb) return NULL; - sfb->currcon = -1; - sfb->dev = dev; + sfb->pdev = pdev; /*** Init sfb->fb with default value ***/ sfb->fb.flags = FBINFO_FLAG_DEFAULT; @@ -745,7 +699,9 @@ static struct smtcfb_info *smtc_alloc_fb_info(struct pci_dev *dev, /* text mode acceleration */ sfb->fb.var.accel_flags = FB_ACCELF_TEXT; sfb->fb.var.vmode = FB_VMODE_NONINTERLACED; - sfb->fb.par = &hw; + + sfb->fb.par = sfb; + sfb->fb.pseudo_palette = colreg; return sfb; @@ -766,17 +722,17 @@ static void smtc_unmap_mmio(struct smtcfb_info *sfb) */ static int smtc_map_smem(struct smtcfb_info *sfb, - struct pci_dev *dev, u_long smem_len) + struct pci_dev *pdev, u_long smem_len) { if (sfb->fb.var.bits_per_pixel == 32) { #ifdef __BIG_ENDIAN - sfb->fb.fix.smem_start = pci_resource_start(dev, 0) + sfb->fb.fix.smem_start = pci_resource_start(pdev, 0) + 0x800000; #else - sfb->fb.fix.smem_start = pci_resource_start(dev, 0); + sfb->fb.fix.smem_start = pci_resource_start(pdev, 0); #endif } else { - sfb->fb.fix.smem_start = pci_resource_start(dev, 0); + sfb->fb.fix.smem_start = pci_resource_start(pdev, 0); } sfb->fb.fix.smem_len = smem_len; @@ -784,8 +740,8 @@ static int smtc_map_smem(struct smtcfb_info *sfb, sfb->fb.screen_base = smtc_VRAMBaseAddress; if (!sfb->fb.screen_base) { - printk(KERN_ERR "%s: unable to map screen memory\n", - sfb->fb.fix.id); + dev_err(&pdev->dev, + "%s: unable to map screen memory\n", sfb->fb.fix.id); return -ENOMEM; } @@ -831,16 +787,14 @@ static int __init sm712vga_setup(char *options) { int index; - if (!options || !*options) { - smdbg("\n No vga parameter\n"); + if (!options || !*options) return -EINVAL; - } smtc_screen_info.lfb_width = 0; smtc_screen_info.lfb_height = 0; smtc_screen_info.lfb_depth = 0; - smdbg("\nsm712vga_setup = %s\n", options); + pr_debug("sm712vga_setup = %s\n", options); for (index = 0; index < ARRAY_SIZE(vesa_mode); @@ -858,10 +812,6 @@ static int __init sm712vga_setup(char *options) } __setup("vga=", sm712vga_setup); -/* Jason (08/13/2009) - * Original init function changed to probe method to be used by pci_drv - * process used to detect chips replaced with kernel process in pci_drv - */ static int __devinit smtcfb_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) { @@ -871,23 +821,20 @@ static int __devinit smtcfb_pci_probe(struct pci_dev *pdev, int err; unsigned long pFramebufferPhysical; - printk(KERN_INFO - "Silicon Motion display driver " SMTC_LINUX_FB_VERSION "\n"); + dev_info(&pdev->dev, "Silicon Motion display driver."); err = pci_enable_device(pdev); /* enable SMTC chip */ if (err) return err; - hw.chipID = ent->device; - sprintf(name, "sm%Xfb", hw.chipID); - sfb = smtc_alloc_fb_info(pdev, name); if (!sfb) goto failed_free; - /* Jason (08/13/2009) - * Store fb_info to be further used when suspending and resuming - */ + + sfb->chipID = ent->device; + sprintf(name, "sm%Xfb", sfb->chipID); + pci_set_drvdata(pdev, sfb); sm7xx_init_hw(); @@ -910,37 +857,37 @@ static int __devinit smtcfb_pci_probe(struct pci_dev *pdev, #endif /* Map address and memory detection */ pFramebufferPhysical = pci_resource_start(pdev, 0); - pci_read_config_byte(pdev, PCI_REVISION_ID, &hw.chipRevID); + pci_read_config_byte(pdev, PCI_REVISION_ID, &sfb->chipRevID); - switch (hw.chipID) { + switch (sfb->chipID) { case 0x710: case 0x712: sfb->fb.fix.mmio_start = pFramebufferPhysical + 0x00400000; sfb->fb.fix.mmio_len = 0x00400000; smem_size = SM712_VIDEOMEMORYSIZE; #ifdef __BIG_ENDIAN - hw.m_pLFB = (smtc_VRAMBaseAddress = + sfb->m_pLFB = (smtc_VRAMBaseAddress = ioremap(pFramebufferPhysical, 0x00c00000)); #else - hw.m_pLFB = (smtc_VRAMBaseAddress = + sfb->m_pLFB = (smtc_VRAMBaseAddress = ioremap(pFramebufferPhysical, 0x00800000)); #endif - hw.m_pMMIO = (smtc_RegBaseAddress = + sfb->m_pMMIO = (smtc_RegBaseAddress = smtc_VRAMBaseAddress + 0x00700000); - hw.m_pDPR = smtc_VRAMBaseAddress + 0x00408000; - hw.m_pVPR = hw.m_pLFB + 0x0040c000; + sfb->m_pDPR = smtc_VRAMBaseAddress + 0x00408000; + sfb->m_pVPR = sfb->m_pLFB + 0x0040c000; #ifdef __BIG_ENDIAN if (sfb->fb.var.bits_per_pixel == 32) { smtc_VRAMBaseAddress += 0x800000; - hw.m_pLFB += 0x800000; - printk(KERN_INFO - "\nsmtc_VRAMBaseAddress=%p hw.m_pLFB=%p\n", - smtc_VRAMBaseAddress, hw.m_pLFB); + sfb->m_pLFB += 0x800000; + dev_info(&pdev->dev, + "smtc_VRAMBaseAddress=%p sfb->m_pLFB=%p", + smtc_VRAMBaseAddress, sfb->m_pLFB); } #endif if (!smtc_RegBaseAddress) { - printk(KERN_ERR - "%s: unable to map memory mapped IO\n", + dev_err(&pdev->dev, + "%s: unable to map memory mapped IO!", sfb->fb.fix.id); err = -ENOMEM; goto failed_fb; @@ -962,20 +909,20 @@ static int __devinit smtcfb_pci_probe(struct pci_dev *pdev, sfb->fb.fix.mmio_start = pFramebufferPhysical; sfb->fb.fix.mmio_len = 0x00200000; smem_size = SM722_VIDEOMEMORYSIZE; - hw.m_pDPR = ioremap(pFramebufferPhysical, 0x00a00000); - hw.m_pLFB = (smtc_VRAMBaseAddress = - hw.m_pDPR + 0x00200000); - hw.m_pMMIO = (smtc_RegBaseAddress = - hw.m_pDPR + 0x000c0000); - hw.m_pVPR = hw.m_pDPR + 0x800; + sfb->m_pDPR = ioremap(pFramebufferPhysical, 0x00a00000); + sfb->m_pLFB = (smtc_VRAMBaseAddress = + sfb->m_pDPR + 0x00200000); + sfb->m_pMMIO = (smtc_RegBaseAddress = + sfb->m_pDPR + 0x000c0000); + sfb->m_pVPR = sfb->m_pDPR + 0x800; smtc_seqw(0x62, 0xff); smtc_seqw(0x6a, 0x0d); smtc_seqw(0x6b, 0x02); break; default: - printk(KERN_ERR - "No valid Silicon Motion display chip was detected!\n"); + dev_err(&pdev->dev, + "No valid Silicon Motion display chip was detected!"); goto failed_fb; } @@ -992,22 +939,21 @@ static int __devinit smtcfb_pci_probe(struct pci_dev *pdev, smtcfb_setmode(sfb); /* Primary display starting from 0 position */ - hw.BaseAddressInVRAM = 0; - sfb->fb.par = &hw; + sfb->BaseAddressInVRAM = 0; err = register_framebuffer(&sfb->fb); if (err < 0) goto failed; - printk(KERN_INFO "Silicon Motion SM%X Rev%X primary display mode" - "%dx%d-%d Init Complete.\n", hw.chipID, hw.chipRevID, - sfb->fb.var.xres, sfb->fb.var.yres, - sfb->fb.var.bits_per_pixel); + dev_info(&pdev->dev, + "Silicon Motion SM%X Rev%X primary display mode %dx%d-%d Init Complete.", + sfb->chipID, sfb->chipRevID, sfb->fb.var.xres, + sfb->fb.var.yres, sfb->fb.var.bits_per_pixel); return 0; failed: - printk(KERN_ERR "Silicon Motion, Inc. primary display init fail\n"); + dev_err(&pdev->dev, "Silicon Motion, Inc. primary display init fail."); smtc_unmap_smem(sfb); smtc_unmap_mmio(sfb); @@ -1021,7 +967,6 @@ failed_free: } -/* Jason (08/11/2009) PCI_DRV wrapper essential structs */ static DEFINE_PCI_DEVICE_TABLE(smtcfb_pci_table) = { { PCI_DEVICE(0x126f, 0x710), }, { PCI_DEVICE(0x126f, 0x712), }, @@ -1030,9 +975,6 @@ static DEFINE_PCI_DEVICE_TABLE(smtcfb_pci_table) = { }; -/* Jason (08/14/2009) - * do some clean up when the driver module is removed - */ static void __devexit smtcfb_pci_remove(struct pci_dev *pdev) { struct smtcfb_info *sfb; @@ -1078,7 +1020,7 @@ static int smtcfb_pci_resume(struct device *device) /* reinit hardware */ sm7xx_init_hw(); - switch (hw.chipID) { + switch (sfb->chipID) { case 0x710: case 0x712: /* set MCLK = 14.31818 * (0x16 / 0x2) */ diff --git a/drivers/staging/sm7xx/smtcfb.h b/drivers/staging/sm7xx/smtcfb.h index ab95af2b9c0..43d86f87341 100644 --- a/drivers/staging/sm7xx/smtcfb.h +++ b/drivers/staging/sm7xx/smtcfb.h @@ -13,19 +13,11 @@ * more details. */ -#define SMTC_LINUX_FB_VERSION "version 0.11.2619.21.01 July 27, 2008" - #define NR_PALETTE 256 #define NR_RGB 2 #define FB_ACCEL_SMI_LYNX 88 -#ifdef __BIG_ENDIAN -#define PC_VGA 0 -#else -#define PC_VGA 1 -#endif - #define SCREEN_X_RES 1024 #define SCREEN_Y_RES 600 #define SCREEN_BPP 16 diff --git a/drivers/staging/telephony/ixj.c b/drivers/staging/telephony/ixj.c index f96027921f6..fd7757ad7fa 100644 --- a/drivers/staging/telephony/ixj.c +++ b/drivers/staging/telephony/ixj.c @@ -19,20 +19,20 @@ * David W. Erhart, <derhart@quicknet.net> * John Sellers, <jsellers@quicknet.net> * Mike Preston, <mpreston@quicknet.net> - * + * * Fixes: David Huggins-Daines, <dhd@cepstral.com> * Fabio Ferrari, <fabio.ferrari@digitro.com.br> * Artis Kugevics, <artis@mt.lv> * Daniele Bellucci, <bellucda@tiscali.it> * - * More information about the hardware related to this driver can be found + * More information about the hardware related to this driver can be found * at our website: http://www.quicknet.net * * IN NO EVENT SHALL QUICKNET TECHNOLOGIES, INC. BE LIABLE TO ANY PARTY FOR * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT * OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF QUICKNET * TECHNOLOGIES, INC. HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * + * * QUICKNET TECHNOLOGIES, INC. SPECIFICALLY DISCLAIMS ANY WARRANTIES, * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY * AND FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS @@ -317,7 +317,7 @@ static IXJ *ixj[IXJMAX]; /* * Allocate a free IXJ device */ - + static IXJ *ixj_alloc() { for(cnt=0; cnt<IXJMAX; cnt++) @@ -366,7 +366,7 @@ static IXJ ixj[IXJMAX]; /* * Allocate a free IXJ device */ - + static IXJ *ixj_alloc(void) { int cnt; @@ -1084,7 +1084,7 @@ static void ixj_pstn_state(IXJ *j) printk(KERN_INFO "IXJ /dev/phone%d Next Ring Cadence state at %u min %ld - %ld - max %ld\n", j->board, j->cadence_f[4].on3, j->cadence_f[4].on3min, j->cadence_f[4].on3dot, j->cadence_f[4].on3max); break; - case 6: + case 6: printk(KERN_INFO "IXJ /dev/phone%d Next Ring Cadence state at %u min %ld - %ld - max %ld\n", j->board, j->cadence_f[4].off3, j->cadence_f[4].off3min, j->cadence_f[4].off3dot, j->cadence_f[4].off3max); break; @@ -1109,7 +1109,7 @@ static void ixj_pstn_state(IXJ *j) } j->pstn_ring_stop = j->pstn_ring_int = 0; daa_set_mode(j, SOP_PU_SLEEP); - } + } outb_p(j->pld_scrw.byte, j->XILINXbase); if (j->pstn_cid_intr && time_after(jiffies, j->pstn_cid_received + hertz)) { ixj_daa_cid_read(j); @@ -1133,7 +1133,7 @@ static void ixj_pstn_state(IXJ *j) printk("IXJ DAA possible wink /dev/phone%d %ld\n", j->board, jiffies); } j->pstn_winkstart = jiffies; - } + } } else { if (j->pstn_winkstart) { if(ixjdebug & 0x0008) { @@ -1524,7 +1524,7 @@ static inline void LED_SetState(int state, IXJ *j) /********************************************************************* * GPIO Pins are configured as follows on the Quicknet Internet * PhoneJACK Telephony Cards -* +* * POTS Select GPIO_6=0 GPIO_7=0 * Mic/Speaker Select GPIO_6=0 GPIO_7=1 * Handset Select GPIO_6=1 GPIO_7=0 @@ -1932,7 +1932,7 @@ static int ixj_hookstate(IXJ *j) if(fOffHook != j->p_hook) { if(!j->checkwait) { j->checkwait = jiffies; - } + } if(time_before(jiffies, j->checkwait + 2)) { fOffHook ^= 1; } else { @@ -2342,8 +2342,8 @@ static int ixj_release(struct inode *inode, struct file *file_p) j->ixj_signals[cnt] = SIGIO; /* Set the excetion signal enable flags */ - j->ex_sig.bits.dtmf_ready = j->ex_sig.bits.hookstate = j->ex_sig.bits.flash = j->ex_sig.bits.pstn_ring = - j->ex_sig.bits.caller_id = j->ex_sig.bits.pstn_wink = j->ex_sig.bits.f0 = j->ex_sig.bits.f1 = j->ex_sig.bits.f2 = + j->ex_sig.bits.dtmf_ready = j->ex_sig.bits.hookstate = j->ex_sig.bits.flash = j->ex_sig.bits.pstn_ring = + j->ex_sig.bits.caller_id = j->ex_sig.bits.pstn_wink = j->ex_sig.bits.f0 = j->ex_sig.bits.f1 = j->ex_sig.bits.f2 = j->ex_sig.bits.f3 = j->ex_sig.bits.fc0 = j->ex_sig.bits.fc1 = j->ex_sig.bits.fc2 = j->ex_sig.bits.fc3 = 1; file_p->private_data = NULL; @@ -2506,7 +2506,7 @@ static int read_filters(IXJ *j) j->cadence_f[cnt].on1, j->cadence_f[cnt].on1min, j->cadence_f[cnt].on1dot, j->cadence_f[cnt].on1max); break; case 2: - printk(KERN_INFO "IXJ /dev/phone%d Next Tone Cadence state at %ld - %ld\n", j->board, j->cadence_f[cnt].off1min, + printk(KERN_INFO "IXJ /dev/phone%d Next Tone Cadence state at %ld - %ld\n", j->board, j->cadence_f[cnt].off1min, j->cadence_f[cnt].off1max); break; case 3: @@ -2521,12 +2521,12 @@ static int read_filters(IXJ *j) printk(KERN_INFO "IXJ /dev/phone%d Next Tone Cadence state at %ld - %ld\n", j->board, j->cadence_f[cnt].on3min, j->cadence_f[cnt].on3max); break; - case 6: + case 6: printk(KERN_INFO "IXJ /dev/phone%d Next Tone Cadence state at %ld - %ld\n", j->board, j->cadence_f[cnt].off3min, j->cadence_f[cnt].off3max); break; } - } + } } if (j->cadence_f[cnt].state == 7) { j->cadence_f[cnt].state = 0; @@ -2656,37 +2656,37 @@ static void ulaw2alaw(unsigned char *buff, unsigned long len) { static unsigned char table_ulaw2alaw[] = { - 0x2A, 0x2B, 0x28, 0x29, 0x2E, 0x2F, 0x2C, 0x2D, - 0x22, 0x23, 0x20, 0x21, 0x26, 0x27, 0x24, 0x25, - 0x3A, 0x3B, 0x38, 0x39, 0x3E, 0x3F, 0x3C, 0x3D, - 0x32, 0x33, 0x30, 0x31, 0x36, 0x37, 0x34, 0x35, - 0x0B, 0x08, 0x09, 0x0E, 0x0F, 0x0C, 0x0D, 0x02, - 0x03, 0x00, 0x01, 0x06, 0x07, 0x04, 0x05, 0x1A, - 0x1B, 0x18, 0x19, 0x1E, 0x1F, 0x1C, 0x1D, 0x12, - 0x13, 0x10, 0x11, 0x16, 0x17, 0x14, 0x15, 0x6B, - 0x68, 0x69, 0x6E, 0x6F, 0x6C, 0x6D, 0x62, 0x63, - 0x60, 0x61, 0x66, 0x67, 0x64, 0x65, 0x7B, 0x79, - 0x7E, 0x7F, 0x7C, 0x7D, 0x72, 0x73, 0x70, 0x71, - 0x76, 0x77, 0x74, 0x75, 0x4B, 0x49, 0x4F, 0x4D, - 0x42, 0x43, 0x40, 0x41, 0x46, 0x47, 0x44, 0x45, - 0x5A, 0x5B, 0x58, 0x59, 0x5E, 0x5F, 0x5C, 0x5D, - 0x52, 0x52, 0x53, 0x53, 0x50, 0x50, 0x51, 0x51, - 0x56, 0x56, 0x57, 0x57, 0x54, 0x54, 0x55, 0xD5, - 0xAA, 0xAB, 0xA8, 0xA9, 0xAE, 0xAF, 0xAC, 0xAD, - 0xA2, 0xA3, 0xA0, 0xA1, 0xA6, 0xA7, 0xA4, 0xA5, - 0xBA, 0xBB, 0xB8, 0xB9, 0xBE, 0xBF, 0xBC, 0xBD, - 0xB2, 0xB3, 0xB0, 0xB1, 0xB6, 0xB7, 0xB4, 0xB5, - 0x8B, 0x88, 0x89, 0x8E, 0x8F, 0x8C, 0x8D, 0x82, - 0x83, 0x80, 0x81, 0x86, 0x87, 0x84, 0x85, 0x9A, - 0x9B, 0x98, 0x99, 0x9E, 0x9F, 0x9C, 0x9D, 0x92, - 0x93, 0x90, 0x91, 0x96, 0x97, 0x94, 0x95, 0xEB, - 0xE8, 0xE9, 0xEE, 0xEF, 0xEC, 0xED, 0xE2, 0xE3, - 0xE0, 0xE1, 0xE6, 0xE7, 0xE4, 0xE5, 0xFB, 0xF9, - 0xFE, 0xFF, 0xFC, 0xFD, 0xF2, 0xF3, 0xF0, 0xF1, - 0xF6, 0xF7, 0xF4, 0xF5, 0xCB, 0xC9, 0xCF, 0xCD, - 0xC2, 0xC3, 0xC0, 0xC1, 0xC6, 0xC7, 0xC4, 0xC5, - 0xDA, 0xDB, 0xD8, 0xD9, 0xDE, 0xDF, 0xDC, 0xDD, - 0xD2, 0xD2, 0xD3, 0xD3, 0xD0, 0xD0, 0xD1, 0xD1, + 0x2A, 0x2B, 0x28, 0x29, 0x2E, 0x2F, 0x2C, 0x2D, + 0x22, 0x23, 0x20, 0x21, 0x26, 0x27, 0x24, 0x25, + 0x3A, 0x3B, 0x38, 0x39, 0x3E, 0x3F, 0x3C, 0x3D, + 0x32, 0x33, 0x30, 0x31, 0x36, 0x37, 0x34, 0x35, + 0x0B, 0x08, 0x09, 0x0E, 0x0F, 0x0C, 0x0D, 0x02, + 0x03, 0x00, 0x01, 0x06, 0x07, 0x04, 0x05, 0x1A, + 0x1B, 0x18, 0x19, 0x1E, 0x1F, 0x1C, 0x1D, 0x12, + 0x13, 0x10, 0x11, 0x16, 0x17, 0x14, 0x15, 0x6B, + 0x68, 0x69, 0x6E, 0x6F, 0x6C, 0x6D, 0x62, 0x63, + 0x60, 0x61, 0x66, 0x67, 0x64, 0x65, 0x7B, 0x79, + 0x7E, 0x7F, 0x7C, 0x7D, 0x72, 0x73, 0x70, 0x71, + 0x76, 0x77, 0x74, 0x75, 0x4B, 0x49, 0x4F, 0x4D, + 0x42, 0x43, 0x40, 0x41, 0x46, 0x47, 0x44, 0x45, + 0x5A, 0x5B, 0x58, 0x59, 0x5E, 0x5F, 0x5C, 0x5D, + 0x52, 0x52, 0x53, 0x53, 0x50, 0x50, 0x51, 0x51, + 0x56, 0x56, 0x57, 0x57, 0x54, 0x54, 0x55, 0xD5, + 0xAA, 0xAB, 0xA8, 0xA9, 0xAE, 0xAF, 0xAC, 0xAD, + 0xA2, 0xA3, 0xA0, 0xA1, 0xA6, 0xA7, 0xA4, 0xA5, + 0xBA, 0xBB, 0xB8, 0xB9, 0xBE, 0xBF, 0xBC, 0xBD, + 0xB2, 0xB3, 0xB0, 0xB1, 0xB6, 0xB7, 0xB4, 0xB5, + 0x8B, 0x88, 0x89, 0x8E, 0x8F, 0x8C, 0x8D, 0x82, + 0x83, 0x80, 0x81, 0x86, 0x87, 0x84, 0x85, 0x9A, + 0x9B, 0x98, 0x99, 0x9E, 0x9F, 0x9C, 0x9D, 0x92, + 0x93, 0x90, 0x91, 0x96, 0x97, 0x94, 0x95, 0xEB, + 0xE8, 0xE9, 0xEE, 0xEF, 0xEC, 0xED, 0xE2, 0xE3, + 0xE0, 0xE1, 0xE6, 0xE7, 0xE4, 0xE5, 0xFB, 0xF9, + 0xFE, 0xFF, 0xFC, 0xFD, 0xF2, 0xF3, 0xF0, 0xF1, + 0xF6, 0xF7, 0xF4, 0xF5, 0xCB, 0xC9, 0xCF, 0xCD, + 0xC2, 0xC3, 0xC0, 0xC1, 0xC6, 0xC7, 0xC4, 0xC5, + 0xDA, 0xDB, 0xD8, 0xD9, 0xDE, 0xDF, 0xDC, 0xDD, + 0xD2, 0xD2, 0xD3, 0xD3, 0xD0, 0xD0, 0xD1, 0xD1, 0xD6, 0xD6, 0xD7, 0xD7, 0xD4, 0xD4, 0xD5, 0xD5 }; @@ -2701,37 +2701,37 @@ static void alaw2ulaw(unsigned char *buff, unsigned long len) { static unsigned char table_alaw2ulaw[] = { - 0x29, 0x2A, 0x27, 0x28, 0x2D, 0x2E, 0x2B, 0x2C, - 0x21, 0x22, 0x1F, 0x20, 0x25, 0x26, 0x23, 0x24, - 0x39, 0x3A, 0x37, 0x38, 0x3D, 0x3E, 0x3B, 0x3C, - 0x31, 0x32, 0x2F, 0x30, 0x35, 0x36, 0x33, 0x34, - 0x0A, 0x0B, 0x08, 0x09, 0x0E, 0x0F, 0x0C, 0x0D, - 0x02, 0x03, 0x00, 0x01, 0x06, 0x07, 0x04, 0x05, - 0x1A, 0x1B, 0x18, 0x19, 0x1E, 0x1F, 0x1C, 0x1D, - 0x12, 0x13, 0x10, 0x11, 0x16, 0x17, 0x14, 0x15, - 0x62, 0x63, 0x60, 0x61, 0x66, 0x67, 0x64, 0x65, - 0x5D, 0x5D, 0x5C, 0x5C, 0x5F, 0x5F, 0x5E, 0x5E, - 0x74, 0x76, 0x70, 0x72, 0x7C, 0x7E, 0x78, 0x7A, - 0x6A, 0x6B, 0x68, 0x69, 0x6E, 0x6F, 0x6C, 0x6D, - 0x48, 0x49, 0x46, 0x47, 0x4C, 0x4D, 0x4A, 0x4B, - 0x40, 0x41, 0x3F, 0x3F, 0x44, 0x45, 0x42, 0x43, - 0x56, 0x57, 0x54, 0x55, 0x5A, 0x5B, 0x58, 0x59, - 0x4F, 0x4F, 0x4E, 0x4E, 0x52, 0x53, 0x50, 0x51, - 0xA9, 0xAA, 0xA7, 0xA8, 0xAD, 0xAE, 0xAB, 0xAC, - 0xA1, 0xA2, 0x9F, 0xA0, 0xA5, 0xA6, 0xA3, 0xA4, - 0xB9, 0xBA, 0xB7, 0xB8, 0xBD, 0xBE, 0xBB, 0xBC, - 0xB1, 0xB2, 0xAF, 0xB0, 0xB5, 0xB6, 0xB3, 0xB4, - 0x8A, 0x8B, 0x88, 0x89, 0x8E, 0x8F, 0x8C, 0x8D, - 0x82, 0x83, 0x80, 0x81, 0x86, 0x87, 0x84, 0x85, - 0x9A, 0x9B, 0x98, 0x99, 0x9E, 0x9F, 0x9C, 0x9D, - 0x92, 0x93, 0x90, 0x91, 0x96, 0x97, 0x94, 0x95, - 0xE2, 0xE3, 0xE0, 0xE1, 0xE6, 0xE7, 0xE4, 0xE5, - 0xDD, 0xDD, 0xDC, 0xDC, 0xDF, 0xDF, 0xDE, 0xDE, - 0xF4, 0xF6, 0xF0, 0xF2, 0xFC, 0xFE, 0xF8, 0xFA, - 0xEA, 0xEB, 0xE8, 0xE9, 0xEE, 0xEF, 0xEC, 0xED, - 0xC8, 0xC9, 0xC6, 0xC7, 0xCC, 0xCD, 0xCA, 0xCB, - 0xC0, 0xC1, 0xBF, 0xBF, 0xC4, 0xC5, 0xC2, 0xC3, - 0xD6, 0xD7, 0xD4, 0xD5, 0xDA, 0xDB, 0xD8, 0xD9, + 0x29, 0x2A, 0x27, 0x28, 0x2D, 0x2E, 0x2B, 0x2C, + 0x21, 0x22, 0x1F, 0x20, 0x25, 0x26, 0x23, 0x24, + 0x39, 0x3A, 0x37, 0x38, 0x3D, 0x3E, 0x3B, 0x3C, + 0x31, 0x32, 0x2F, 0x30, 0x35, 0x36, 0x33, 0x34, + 0x0A, 0x0B, 0x08, 0x09, 0x0E, 0x0F, 0x0C, 0x0D, + 0x02, 0x03, 0x00, 0x01, 0x06, 0x07, 0x04, 0x05, + 0x1A, 0x1B, 0x18, 0x19, 0x1E, 0x1F, 0x1C, 0x1D, + 0x12, 0x13, 0x10, 0x11, 0x16, 0x17, 0x14, 0x15, + 0x62, 0x63, 0x60, 0x61, 0x66, 0x67, 0x64, 0x65, + 0x5D, 0x5D, 0x5C, 0x5C, 0x5F, 0x5F, 0x5E, 0x5E, + 0x74, 0x76, 0x70, 0x72, 0x7C, 0x7E, 0x78, 0x7A, + 0x6A, 0x6B, 0x68, 0x69, 0x6E, 0x6F, 0x6C, 0x6D, + 0x48, 0x49, 0x46, 0x47, 0x4C, 0x4D, 0x4A, 0x4B, + 0x40, 0x41, 0x3F, 0x3F, 0x44, 0x45, 0x42, 0x43, + 0x56, 0x57, 0x54, 0x55, 0x5A, 0x5B, 0x58, 0x59, + 0x4F, 0x4F, 0x4E, 0x4E, 0x52, 0x53, 0x50, 0x51, + 0xA9, 0xAA, 0xA7, 0xA8, 0xAD, 0xAE, 0xAB, 0xAC, + 0xA1, 0xA2, 0x9F, 0xA0, 0xA5, 0xA6, 0xA3, 0xA4, + 0xB9, 0xBA, 0xB7, 0xB8, 0xBD, 0xBE, 0xBB, 0xBC, + 0xB1, 0xB2, 0xAF, 0xB0, 0xB5, 0xB6, 0xB3, 0xB4, + 0x8A, 0x8B, 0x88, 0x89, 0x8E, 0x8F, 0x8C, 0x8D, + 0x82, 0x83, 0x80, 0x81, 0x86, 0x87, 0x84, 0x85, + 0x9A, 0x9B, 0x98, 0x99, 0x9E, 0x9F, 0x9C, 0x9D, + 0x92, 0x93, 0x90, 0x91, 0x96, 0x97, 0x94, 0x95, + 0xE2, 0xE3, 0xE0, 0xE1, 0xE6, 0xE7, 0xE4, 0xE5, + 0xDD, 0xDD, 0xDC, 0xDC, 0xDF, 0xDF, 0xDE, 0xDE, + 0xF4, 0xF6, 0xF0, 0xF2, 0xFC, 0xFE, 0xF8, 0xFA, + 0xEA, 0xEB, 0xE8, 0xE9, 0xEE, 0xEF, 0xEC, 0xED, + 0xC8, 0xC9, 0xC6, 0xC7, 0xCC, 0xCD, 0xCA, 0xCB, + 0xC0, 0xC1, 0xBF, 0xBF, 0xC4, 0xC5, 0xC2, 0xC3, + 0xD6, 0xD7, 0xD4, 0xD5, 0xDA, 0xDB, 0xD8, 0xD9, 0xCF, 0xCF, 0xCE, 0xCE, 0xD2, 0xD3, 0xD0, 0xD1 }; @@ -3090,7 +3090,7 @@ static int ixj_write_cid_string(IXJ *j, char *s, int checksum) static void ixj_pad_fsk(IXJ *j, int pad) { - int cnt; + int cnt; for (cnt = 0; cnt < pad; cnt++) { if(j->fskdcnt < (j->fsksize - 1)) @@ -3474,7 +3474,7 @@ static void ixj_write_frame(IXJ *j) ixj_post_cid(j); } /* This may seem rude, but if we just played one frame of FSK data for CallerID - and there is real audio data in the buffer, we need to throw it away because + and there is real audio data in the buffer, we need to throw it away because we just used it's time slot */ if (j->write_buffer_rp > j->write_buffer_wp) { j->write_buffer_rp += j->cid_play_frame_size * 2; @@ -3486,7 +3486,7 @@ static void ixj_write_frame(IXJ *j) wake_up_interruptible(&j->poll_q); /* Wake any blocked selects */ } - } else if (j->write_buffer && j->write_buffers_empty < 1) { + } else if (j->write_buffer && j->write_buffers_empty < 1) { if (j->write_buffer_wp > j->write_buffer_rp) { frame_count = (j->write_buffer_wp - j->write_buffer_rp) / (j->play_frame_size * 2); @@ -4150,7 +4150,7 @@ static void ixj_aec_start(IXJ *j, int level) ixj_WriteDSPCommand(0xCF97, j); /* Set AGC Enable */ ixj_WriteDSPCommand(0x0000, j); /* to off */ - + break; case AEC_MED: @@ -4161,7 +4161,7 @@ static void ixj_aec_start(IXJ *j, int level) ixj_WriteDSPCommand(0xCF97, j); /* Set AGC Enable */ ixj_WriteDSPCommand(0x0000, j); /* to off */ - + break; case AEC_HIGH: @@ -4172,7 +4172,7 @@ static void ixj_aec_start(IXJ *j, int level) ixj_WriteDSPCommand(0xCF97, j); /* Set AGC Enable */ ixj_WriteDSPCommand(0x0000, j); /* to off */ - + break; case AEC_AGC: @@ -4197,28 +4197,28 @@ static void ixj_aec_start(IXJ *j, int level) /* Now we can set the AGC initial parameters and turn it on */ ixj_WriteDSPCommand(0xCF90, j); /* Set AGC Minimum gain */ ixj_WriteDSPCommand(0x0020, j); /* to 0.125 (-18dB) */ - + ixj_WriteDSPCommand(0xCF91, j); /* Set AGC Maximum gain */ ixj_WriteDSPCommand(0x1000, j); /* to 16 (24dB) */ - + ixj_WriteDSPCommand(0xCF92, j); /* Set AGC start gain */ ixj_WriteDSPCommand(0x0800, j); /* to 8 (+18dB) */ - + ixj_WriteDSPCommand(0xCF93, j); /* Set AGC hold time */ ixj_WriteDSPCommand(0x1F40, j); /* to 2 seconds (units are 250us) */ - + ixj_WriteDSPCommand(0xCF94, j); /* Set AGC Attack Time Constant */ ixj_WriteDSPCommand(0x0005, j); /* to 8ms */ - + ixj_WriteDSPCommand(0xCF95, j); /* Set AGC Decay Time Constant */ ixj_WriteDSPCommand(0x000D, j); /* to 4096ms */ - + ixj_WriteDSPCommand(0xCF96, j); /* Set AGC Attack Threshold */ ixj_WriteDSPCommand(0x1200, j); /* to 25% */ - + ixj_WriteDSPCommand(0xCF97, j); /* Set AGC Enable */ ixj_WriteDSPCommand(0x0001, j); /* to on */ - + break; case AEC_AUTO: @@ -4495,7 +4495,7 @@ static int ixj_play_start(IXJ *j) return -ENOMEM; } /* j->write_buffers_empty = 2; */ - j->write_buffers_empty = 1; + j->write_buffers_empty = 1; j->write_buffer_size = j->play_frame_size * 2; j->write_buffer_end = j->write_buffer + j->play_frame_size * 2; j->write_buffer_rp = j->write_buffer_wp = j->write_buffer; @@ -6465,9 +6465,9 @@ static long do_ixj_ioctl(struct file *file_p, unsigned int cmd, unsigned long ar ixj_ringback(j); break; case PHONE_WINK: - if(j->cardtype == QTI_PHONEJACK) + if(j->cardtype == QTI_PHONEJACK) retval = -1; - else + else retval = ixj_wink(j); break; case PHONE_CPT_STOP: @@ -6553,7 +6553,7 @@ static long do_ixj_ioctl(struct file *file_p, unsigned int cmd, unsigned long ar ixj_write_vmwi(j, arg); break; case IXJCTL_CID: - if (copy_to_user(argp, &j->cid, sizeof(PHONE_CID))) + if (copy_to_user(argp, &j->cid, sizeof(PHONE_CID))) retval = -EFAULT; j->ex.bits.caller_id = 0; break; @@ -6575,13 +6575,13 @@ static long do_ixj_ioctl(struct file *file_p, unsigned int cmd, unsigned long ar break; case PHONE_CAPABILITIES_LIST: add_caps(j); - if (copy_to_user(argp, j->caplist, sizeof(struct phone_capability) * j->caps)) + if (copy_to_user(argp, j->caplist, sizeof(struct phone_capability) * j->caps)) retval = -EFAULT; break; case PHONE_CAPABILITIES_CHECK: { struct phone_capability cap; - if (copy_from_user(&cap, argp, sizeof(cap))) + if (copy_from_user(&cap, argp, sizeof(cap))) retval = -EFAULT; else { add_caps(j); @@ -6597,13 +6597,13 @@ static long do_ixj_ioctl(struct file *file_p, unsigned int cmd, unsigned long ar j->ex.bits.pstn_ring = 0; break; case IXJCTL_SET_FILTER: - if (copy_from_user(&jf, argp, sizeof(jf))) + if (copy_from_user(&jf, argp, sizeof(jf))) retval = -EFAULT; else retval = ixj_init_filter(j, &jf); break; case IXJCTL_SET_FILTER_RAW: - if (copy_from_user(&jfr, argp, sizeof(jfr))) + if (copy_from_user(&jfr, argp, sizeof(jfr))) retval = -EFAULT; else retval = ixj_init_filter_raw(j, &jfr); @@ -6638,9 +6638,9 @@ static long do_ixj_ioctl(struct file *file_p, unsigned int cmd, unsigned long ar raise *= 2; } if(j->sigdef.signal) - j->ex_sig.bytes |= raise; + j->ex_sig.bytes |= raise; else - j->ex_sig.bytes &= (raise^0xffff); + j->ex_sig.bytes &= (raise^0xffff); } break; case IXJCTL_INTERCOM_STOP: @@ -7040,9 +7040,9 @@ static int ixj_selfprobe(IXJ *j) /* initialise the DTMF prescale to a sensible value */ if (j->cardtype == QTI_LINEJACK) { - set_dtmf_prescale(j, 0x10); + set_dtmf_prescale(j, 0x10); } else { - set_dtmf_prescale(j, 0x40); + set_dtmf_prescale(j, 0x40); } set_play_volume(j, 0x100); set_rec_volume(j, 0x100); @@ -7095,15 +7095,15 @@ static int ixj_selfprobe(IXJ *j) j->ixj_signals[cnt] = SIGIO; /* Set the excetion signal enable flags */ - j->ex_sig.bits.dtmf_ready = j->ex_sig.bits.hookstate = j->ex_sig.bits.flash = j->ex_sig.bits.pstn_ring = - j->ex_sig.bits.caller_id = j->ex_sig.bits.pstn_wink = j->ex_sig.bits.f0 = j->ex_sig.bits.f1 = j->ex_sig.bits.f2 = + j->ex_sig.bits.dtmf_ready = j->ex_sig.bits.hookstate = j->ex_sig.bits.flash = j->ex_sig.bits.pstn_ring = + j->ex_sig.bits.caller_id = j->ex_sig.bits.pstn_wink = j->ex_sig.bits.f0 = j->ex_sig.bits.f1 = j->ex_sig.bits.f2 = j->ex_sig.bits.f3 = j->ex_sig.bits.fc0 = j->ex_sig.bits.fc1 = j->ex_sig.bits.fc2 = j->ex_sig.bits.fc3 = 1; #ifdef IXJ_DYN_ALLOC j->fskdata = NULL; #endif j->fskdcnt = 0; j->cidcw_wait = 0; - + /* Register with the Telephony for Linux subsystem */ j->p.f_op = &ixj_fops; j->p.open = ixj_open; @@ -7118,7 +7118,7 @@ static int ixj_selfprobe(IXJ *j) /* * Exported service for pcmcia card handling */ - + IXJ *ixj_pcmcia_probe(unsigned long dsp, unsigned long xilinx) { IXJ *j = ixj_alloc(); @@ -7320,7 +7320,7 @@ static int ixj_get_status_proc(char *buf) len += sprintf(buf + len, "\nRec volume 0x%x", get_rec_volume(j)); len += sprintf(buf + len, "\nPlay volume 0x%x", get_play_volume(j)); len += sprintf(buf + len, "\nDTMF prescale 0x%x", get_dtmf_prescale(j)); - + len += sprintf(buf + len, "\nHook state %d", j->hookstate); /* j->r_hook); */ if (j->cardtype == QTI_LINEJACK) { @@ -7417,7 +7417,7 @@ static int ixj_get_status_proc(char *buf) len += sprintf(buf + len, "\nPControl Wait Fails %ld", j->pcontrolwaitfail); len += sprintf(buf + len, "\nIs Control Ready Checks %ld", j->iscontrolready); len += sprintf(buf + len, "\nIs Control Ready Check failures %ld", j->iscontrolreadyfail); - + #endif len += sprintf(buf + len, "\n"); } @@ -7608,7 +7608,7 @@ static IXJ *new_ixj(unsigned long port) } static int __init ixj_probe_isapnp(int *cnt) -{ +{ int probe = 0; int func = 0x110; struct pnp_dev *dev = NULL, *old_dev = NULL; @@ -7686,7 +7686,7 @@ static int __init ixj_probe_isapnp(int *cnt) } return probe; } - + static int __init ixj_probe_isa(int *cnt) { int i, probe; @@ -7713,7 +7713,7 @@ static int __init ixj_probe_isa(int *cnt) static int __init ixj_probe_pci(int *cnt) { - struct pci_dev *pci = NULL; + struct pci_dev *pci = NULL; int i, probe = 0; IXJ *j = NULL; @@ -7745,7 +7745,7 @@ static int __init ixj_probe_pci(int *cnt) static int __init ixj_init(void) { int cnt = 0; - int probe = 0; + int probe = 0; cnt = 0; @@ -7887,7 +7887,7 @@ static void DAA_Coeff_US(IXJ *j) /* j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_1[2] = 0x2D; */ /* j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_1[1] = 0x62; */ /* j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_1[0] = 0x2D; */ - /* Bytes for Ringing part 2 (06):13,42,A6,BA,D4,73,CA,D5 */ + /* Bytes for Ringing part 2 (06):13,42,A6,BA,D4,73,CA,D5 */ /* j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_2[7] = 0x2D; */ /* j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_2[6] = 0x62; */ /* j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_2[5] = 0xA6; */ diff --git a/drivers/staging/tidspbridge/core/io_sm.c b/drivers/staging/tidspbridge/core/io_sm.c index 9b50b5bd4ed..c51f651dfd1 100644 --- a/drivers/staging/tidspbridge/core/io_sm.c +++ b/drivers/staging/tidspbridge/core/io_sm.c @@ -2212,7 +2212,7 @@ void dump_dl_modules(struct bridge_dev_context *bridge_context) if (status) { pr_debug( - "%s: Failed to read dll_module stuct for 0x%x.\n", + "%s: Failed to read dll_module struct for 0x%x.\n", __func__, module_dsp_addr); break; } diff --git a/drivers/staging/tidspbridge/core/ue_deh.c b/drivers/staging/tidspbridge/core/ue_deh.c index 006ffd75289..3d28b2345fb 100644 --- a/drivers/staging/tidspbridge/core/ue_deh.c +++ b/drivers/staging/tidspbridge/core/ue_deh.c @@ -215,7 +215,7 @@ static inline const char *event_to_string(int event) case DSP_MMUFAULT: return "DSP_MMUFAULT"; break; case DSP_PWRERROR: return "DSP_PWRERROR"; break; case DSP_WDTOVERFLOW: return "DSP_WDTOVERFLOW"; break; - default: return "unkown event"; break; + default: return "unknown event"; break; } } diff --git a/drivers/staging/usbip/stub_dev.c b/drivers/staging/usbip/stub_dev.c index fa870e3f7f6..92ced35e6b7 100644 --- a/drivers/staging/usbip/stub_dev.c +++ b/drivers/staging/usbip/stub_dev.c @@ -113,8 +113,8 @@ static ssize_t store_sockfd(struct device *dev, struct device_attribute *attr, spin_unlock(&sdev->ud.lock); - sdev->ud.tcp_rx = kthread_run(stub_rx_loop, &sdev->ud, "stub_rx"); - sdev->ud.tcp_tx = kthread_run(stub_tx_loop, &sdev->ud, "stub_tx"); + sdev->ud.tcp_rx = kthread_get_run(stub_rx_loop, &sdev->ud, "stub_rx"); + sdev->ud.tcp_tx = kthread_get_run(stub_tx_loop, &sdev->ud, "stub_tx"); spin_lock(&sdev->ud.lock); sdev->ud.status = SDEV_ST_USED; @@ -187,10 +187,10 @@ static void stub_shutdown_connection(struct usbip_device *ud) } /* 1. stop threads */ - if (ud->tcp_rx && !task_is_dead(ud->tcp_rx)) - kthread_stop(ud->tcp_rx); - if (ud->tcp_tx && !task_is_dead(ud->tcp_tx)) - kthread_stop(ud->tcp_tx); + if (ud->tcp_rx) + kthread_stop_put(ud->tcp_rx); + if (ud->tcp_tx) + kthread_stop_put(ud->tcp_tx); /* * 2. close the socket diff --git a/drivers/staging/usbip/usbip_common.h b/drivers/staging/usbip/usbip_common.h index c7b888ca54f..5d89c0fd6f7 100644 --- a/drivers/staging/usbip/usbip_common.h +++ b/drivers/staging/usbip/usbip_common.h @@ -292,6 +292,23 @@ struct usbip_device { } eh_ops; }; +#define kthread_get_run(threadfn, data, namefmt, ...) \ +({ \ + struct task_struct *__k \ + = kthread_create(threadfn, data, namefmt, ## __VA_ARGS__); \ + if (!IS_ERR(__k)) { \ + get_task_struct(__k); \ + wake_up_process(__k); \ + } \ + __k; \ +}) + +#define kthread_stop_put(k) \ + do { \ + kthread_stop(k); \ + put_task_struct(k); \ + } while (0) + /* usbip_common.c */ void usbip_dump_urb(struct urb *purb); void usbip_dump_header(struct usbip_header *pdu); diff --git a/drivers/staging/usbip/usbip_protocol.txt b/drivers/staging/usbip/usbip_protocol.txt index 0f102081e86..16b6fe27284 100644 --- a/drivers/staging/usbip/usbip_protocol.txt +++ b/drivers/staging/usbip/usbip_protocol.txt @@ -27,7 +27,7 @@ Once the client knows the list of exported USB devices it may decide to use one of them. First the client opens a TCP/IP connection towards the server and sends an OP_REQ_IMPORT packet. The server replies with OP_REP_IMPORT. If the import was successful the TCP/IP connection remains open and will be used -to trasfer the URB traffic between the client and the server. The client may +to transfer the URB traffic between the client and the server. The client may send two types of packets: the USBIP_CMD_SUBMIT to submit an URB, and USBIP_CMD_UNLINK to unlink a previously submitted URB. The answers of the server may be USBIP_RET_SUBMIT and USBIP_RET_UNLINK respectively. diff --git a/drivers/staging/usbip/userspace/libsrc/vhci_driver.c b/drivers/staging/usbip/userspace/libsrc/vhci_driver.c index 269787751b2..0958ba53e94 100644 --- a/drivers/staging/usbip/userspace/libsrc/vhci_driver.c +++ b/drivers/staging/usbip/userspace/libsrc/vhci_driver.c @@ -59,7 +59,10 @@ static int parse_status(char *value) /* skip a header line */ - c = strchr(value, '\n') + 1; + c = strchr(value, '\n'); + if (!c) + return -1; + c++; while (*c != '\0') { int port, status, speed, devid; @@ -109,7 +112,10 @@ static int parse_status(char *value) /* go to the next line */ - c = strchr(c, '\n') + 1; + c = strchr(c, '\n'); + if (!c) + break; + c++; } dbg("exit"); @@ -264,11 +270,17 @@ static int get_nports(void) attr_status->method, attr_status->value); /* skip a header line */ - c = strchr(attr_status->value, '\n') + 1; + c = strchr(attr_status->value, '\n'); + if (!c) + return 0; + c++; while (*c != '\0') { /* go to the next line */ - c = strchr(c, '\n') + 1; + c = strchr(c, '\n'); + if (!c) + return nports; + c++; nports += 1; } diff --git a/drivers/staging/usbip/vhci_hcd.c b/drivers/staging/usbip/vhci_hcd.c index dca9bf11f0c..f708cbaee16 100644 --- a/drivers/staging/usbip/vhci_hcd.c +++ b/drivers/staging/usbip/vhci_hcd.c @@ -821,10 +821,10 @@ static void vhci_shutdown_connection(struct usbip_device *ud) } /* kill threads related to this sdev, if v.c. exists */ - if (vdev->ud.tcp_rx && !task_is_dead(vdev->ud.tcp_rx)) - kthread_stop(vdev->ud.tcp_rx); - if (vdev->ud.tcp_tx && !task_is_dead(vdev->ud.tcp_tx)) - kthread_stop(vdev->ud.tcp_tx); + if (vdev->ud.tcp_rx) + kthread_stop_put(vdev->ud.tcp_rx); + if (vdev->ud.tcp_tx) + kthread_stop_put(vdev->ud.tcp_tx); pr_info("stop threads\n"); diff --git a/drivers/staging/usbip/vhci_rx.c b/drivers/staging/usbip/vhci_rx.c index f5fba7320c5..f0eaf04fa25 100644 --- a/drivers/staging/usbip/vhci_rx.c +++ b/drivers/staging/usbip/vhci_rx.c @@ -162,7 +162,7 @@ static void vhci_recv_ret_unlink(struct vhci_device *vdev, * already received the result of its submit result and gave * back the URB. */ - pr_info("the urb (seqnum %d) was already given backed\n", + pr_info("the urb (seqnum %d) was already given back\n", pdu->base.seqnum); } else { usbip_dbg_vhci_rx("now giveback urb %p\n", urb); diff --git a/drivers/staging/usbip/vhci_sysfs.c b/drivers/staging/usbip/vhci_sysfs.c index 0cd039bb5fd..7ce9c2f7e44 100644 --- a/drivers/staging/usbip/vhci_sysfs.c +++ b/drivers/staging/usbip/vhci_sysfs.c @@ -222,8 +222,8 @@ static ssize_t store_attach(struct device *dev, struct device_attribute *attr, spin_unlock(&the_controller->lock); /* end the lock */ - vdev->ud.tcp_rx = kthread_run(vhci_rx_loop, &vdev->ud, "vhci_rx"); - vdev->ud.tcp_tx = kthread_run(vhci_tx_loop, &vdev->ud, "vhci_tx"); + vdev->ud.tcp_rx = kthread_get_run(vhci_rx_loop, &vdev->ud, "vhci_rx"); + vdev->ud.tcp_tx = kthread_get_run(vhci_tx_loop, &vdev->ud, "vhci_tx"); rh_port_connect(rhport, speed); diff --git a/drivers/staging/vme/Makefile b/drivers/staging/vme/Makefile index b4ea3f8d0a5..accdb72e39e 100644 --- a/drivers/staging/vme/Makefile +++ b/drivers/staging/vme/Makefile @@ -1,8 +1 @@ -# -# Makefile for the VME bridge device drivers. -# -obj-$(CONFIG_VME_BUS) += vme.o - -obj-y += bridges/ obj-y += devices/ -obj-y += boards/ diff --git a/drivers/staging/vme/TODO b/drivers/staging/vme/TODO deleted file mode 100644 index 79f00333e7e..00000000000 --- a/drivers/staging/vme/TODO +++ /dev/null @@ -1,5 +0,0 @@ - TODO - ==== - -- Add one or more device drivers which use the VME framework. - diff --git a/drivers/staging/vme/devices/Kconfig b/drivers/staging/vme/devices/Kconfig index 55ec30cb1fa..d0cab176619 100644 --- a/drivers/staging/vme/devices/Kconfig +++ b/drivers/staging/vme/devices/Kconfig @@ -2,6 +2,7 @@ comment "VME Device Drivers" config VME_USER tristate "VME user space access driver" + depends on STAGING help If you say Y here you want to be able to access a limited number of VME windows in a manner at least semi-compatible with the interface @@ -9,7 +10,7 @@ config VME_USER config VME_PIO2 tristate "GE PIO2 VME" - depends on GPIOLIB + depends on STAGING && GPIOLIB help Say Y here to include support for the GE PIO2. The PIO2 is a 6U VME slave card, implementing 32 solid-state relay switched IO lines, in diff --git a/drivers/staging/vme/devices/vme_pio2_cntr.c b/drivers/staging/vme/devices/vme_pio2_cntr.c index 08e0d59806c..6335471faa3 100644 --- a/drivers/staging/vme/devices/vme_pio2_cntr.c +++ b/drivers/staging/vme/devices/vme_pio2_cntr.c @@ -17,8 +17,8 @@ #include <linux/device.h> #include <linux/types.h> #include <linux/gpio.h> +#include <linux/vme.h> -#include "../vme.h" #include "vme_pio2.h" static int pio2_cntr_irq_set(struct pio2_card *card, int id) diff --git a/drivers/staging/vme/devices/vme_pio2_core.c b/drivers/staging/vme/devices/vme_pio2_core.c index 573c80003f0..4bf8e05ac31 100644 --- a/drivers/staging/vme/devices/vme_pio2_core.c +++ b/drivers/staging/vme/devices/vme_pio2_core.c @@ -10,7 +10,6 @@ * option) any later version. */ -#include <linux/version.h> #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/types.h> @@ -20,8 +19,8 @@ #include <linux/ctype.h> #include <linux/gpio.h> #include <linux/slab.h> +#include <linux/vme.h> -#include "../vme.h" #include "vme_pio2.h" diff --git a/drivers/staging/vme/devices/vme_pio2_gpio.c b/drivers/staging/vme/devices/vme_pio2_gpio.c index 858484915f0..ad76a477825 100644 --- a/drivers/staging/vme/devices/vme_pio2_gpio.c +++ b/drivers/staging/vme/devices/vme_pio2_gpio.c @@ -10,7 +10,6 @@ * option) any later version. */ -#include <linux/version.h> #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/types.h> @@ -21,8 +20,8 @@ #include <linux/ctype.h> #include <linux/gpio.h> #include <linux/slab.h> +#include <linux/vme.h> -#include "../vme.h" #include "vme_pio2.h" static const char driver_name[] = "pio2_gpio"; @@ -79,7 +78,7 @@ static void pio2_gpio_set(struct gpio_chip *chip, unsigned int offset, if ((card->bank[PIO2_CHANNEL_BANK[offset]].config == INPUT) | (card->bank[PIO2_CHANNEL_BANK[offset]].config == NOFIT)) { - dev_err(&card->vdev->dev, "Channel not availabe as output\n"); + dev_err(&card->vdev->dev, "Channel not available as output\n"); return; } diff --git a/drivers/staging/vme/devices/vme_user.c b/drivers/staging/vme/devices/vme_user.c index 7dcd1622b5f..e24a6f95db1 100644 --- a/drivers/staging/vme/devices/vme_user.c +++ b/drivers/staging/vme/devices/vme_user.c @@ -27,7 +27,7 @@ #include <linux/module.h> #include <linux/pagemap.h> #include <linux/pci.h> -#include <linux/semaphore.h> +#include <linux/mutex.h> #include <linux/slab.h> #include <linux/spinlock.h> #include <linux/syscalls.h> @@ -36,8 +36,8 @@ #include <linux/io.h> #include <linux/uaccess.h> +#include <linux/vme.h> -#include "../vme.h" #include "vme_user.h" static DEFINE_MUTEX(vme_user_mutex); @@ -95,7 +95,7 @@ struct image_desc { void *kern_buf; /* Buffer address in kernel space */ dma_addr_t pci_buf; /* Buffer address in PCI address space */ unsigned long long size_buf; /* Buffer size */ - struct semaphore sem; /* Semaphore for locking image */ + struct mutex mutex; /* Mutex for locking image */ struct device *device; /* Sysfs device */ struct vme_resource *resource; /* VME resource */ int users; /* Number of current users */ @@ -168,7 +168,7 @@ static int vme_user_open(struct inode *inode, struct file *file) int err; unsigned int minor = MINOR(inode->i_rdev); - down(&image[minor].sem); + mutex_lock(&image[minor].mutex); /* Allow device to be opened if a resource is needed and allocated. */ if (minor < CONTROL_MINOR && image[minor].resource == NULL) { printk(KERN_ERR "No resources allocated for device\n"); @@ -179,12 +179,12 @@ static int vme_user_open(struct inode *inode, struct file *file) /* Increment user count */ image[minor].users++; - up(&image[minor].sem); + mutex_unlock(&image[minor].mutex); return 0; err_res: - up(&image[minor].sem); + mutex_unlock(&image[minor].mutex); return err; } @@ -193,12 +193,12 @@ static int vme_user_release(struct inode *inode, struct file *file) { unsigned int minor = MINOR(inode->i_rdev); - down(&image[minor].sem); + mutex_lock(&image[minor].mutex); /* Decrement user count */ image[minor].users--; - up(&image[minor].sem); + mutex_unlock(&image[minor].mutex); return 0; } @@ -325,14 +325,14 @@ static ssize_t vme_user_read(struct file *file, char __user *buf, size_t count, if (minor == CONTROL_MINOR) return 0; - down(&image[minor].sem); + mutex_lock(&image[minor].mutex); /* XXX Do we *really* want this helper - we can use vme_*_get ? */ image_size = vme_get_size(image[minor].resource); /* Ensure we are starting at a valid location */ if ((*ppos < 0) || (*ppos > (image_size - 1))) { - up(&image[minor].sem); + mutex_unlock(&image[minor].mutex); return 0; } @@ -353,8 +353,7 @@ static ssize_t vme_user_read(struct file *file, char __user *buf, size_t count, retval = -EINVAL; } - up(&image[minor].sem); - + mutex_unlock(&image[minor].mutex); if (retval > 0) *ppos += retval; @@ -372,13 +371,13 @@ static ssize_t vme_user_write(struct file *file, const char __user *buf, if (minor == CONTROL_MINOR) return 0; - down(&image[minor].sem); + mutex_lock(&image[minor].mutex); image_size = vme_get_size(image[minor].resource); /* Ensure we are starting at a valid location */ if ((*ppos < 0) || (*ppos > (image_size - 1))) { - up(&image[minor].sem); + mutex_unlock(&image[minor].mutex); return 0; } @@ -398,8 +397,8 @@ static ssize_t vme_user_write(struct file *file, const char __user *buf, default: retval = -EINVAL; } - - up(&image[minor].sem); + + mutex_unlock(&image[minor].mutex); if (retval > 0) *ppos += retval; @@ -416,7 +415,7 @@ static loff_t vme_user_llseek(struct file *file, loff_t off, int whence) if (minor == CONTROL_MINOR) return -EINVAL; - down(&image[minor].sem); + mutex_lock(&image[minor].mutex); image_size = vme_get_size(image[minor].resource); switch (whence) { @@ -430,19 +429,19 @@ static loff_t vme_user_llseek(struct file *file, loff_t off, int whence) absolute = image_size + off; break; default: - up(&image[minor].sem); + mutex_unlock(&image[minor].mutex); return -EINVAL; break; } if ((absolute < 0) || (absolute >= image_size)) { - up(&image[minor].sem); + mutex_unlock(&image[minor].mutex); return -EINVAL; } file->f_pos = absolute; - up(&image[minor].sem); + mutex_unlock(&image[minor].mutex); return absolute; } @@ -696,7 +695,7 @@ static int __devinit vme_user_probe(struct vme_dev *vdev) for (i = 0; i < VME_DEVS; i++) { image[i].kern_buf = NULL; image[i].pci_buf = 0; - sema_init(&image[i].sem, 1); + mutex_init(&image[i].mutex); image[i].device = NULL; image[i].resource = NULL; image[i].users = 0; @@ -858,8 +857,10 @@ static int __devexit vme_user_remove(struct vme_dev *dev) int i; /* Remove sysfs Entries */ - for (i = 0; i < VME_DEVS; i++) + for (i = 0; i < VME_DEVS; i++) { + mutex_destroy(&image[i].mutex); device_destroy(vme_user_sysfs_class, MKDEV(VME_MAJOR, i)); + } class_destroy(vme_user_sysfs_class); for (i = MASTER_MINOR; i < (MASTER_MAX + 1); i++) { diff --git a/drivers/staging/vme/vme.h b/drivers/staging/vme/vme.h deleted file mode 100644 index c9d65bf14ce..00000000000 --- a/drivers/staging/vme/vme.h +++ /dev/null @@ -1,174 +0,0 @@ -#ifndef _VME_H_ -#define _VME_H_ - -/* Resource Type */ -enum vme_resource_type { - VME_MASTER, - VME_SLAVE, - VME_DMA, - VME_LM -}; - -/* VME Address Spaces */ -#define VME_A16 0x1 -#define VME_A24 0x2 -#define VME_A32 0x4 -#define VME_A64 0x8 -#define VME_CRCSR 0x10 -#define VME_USER1 0x20 -#define VME_USER2 0x40 -#define VME_USER3 0x80 -#define VME_USER4 0x100 - -#define VME_A16_MAX 0x10000ULL -#define VME_A24_MAX 0x1000000ULL -#define VME_A32_MAX 0x100000000ULL -#define VME_A64_MAX 0x10000000000000000ULL -#define VME_CRCSR_MAX 0x1000000ULL - - -/* VME Cycle Types */ -#define VME_SCT 0x1 -#define VME_BLT 0x2 -#define VME_MBLT 0x4 -#define VME_2eVME 0x8 -#define VME_2eSST 0x10 -#define VME_2eSSTB 0x20 - -#define VME_2eSST160 0x100 -#define VME_2eSST267 0x200 -#define VME_2eSST320 0x400 - -#define VME_SUPER 0x1000 -#define VME_USER 0x2000 -#define VME_PROG 0x4000 -#define VME_DATA 0x8000 - -/* VME Data Widths */ -#define VME_D8 0x1 -#define VME_D16 0x2 -#define VME_D32 0x4 -#define VME_D64 0x8 - -/* Arbitration Scheduling Modes */ -#define VME_R_ROBIN_MODE 0x1 -#define VME_PRIORITY_MODE 0x2 - -#define VME_DMA_PATTERN (1<<0) -#define VME_DMA_PCI (1<<1) -#define VME_DMA_VME (1<<2) - -#define VME_DMA_PATTERN_BYTE (1<<0) -#define VME_DMA_PATTERN_WORD (1<<1) -#define VME_DMA_PATTERN_INCREMENT (1<<2) - -#define VME_DMA_VME_TO_MEM (1<<0) -#define VME_DMA_MEM_TO_VME (1<<1) -#define VME_DMA_VME_TO_VME (1<<2) -#define VME_DMA_MEM_TO_MEM (1<<3) -#define VME_DMA_PATTERN_TO_VME (1<<4) -#define VME_DMA_PATTERN_TO_MEM (1<<5) - -struct vme_dma_attr { - u32 type; - void *private; -}; - -struct vme_resource { - enum vme_resource_type type; - struct list_head *entry; -}; - -extern struct bus_type vme_bus_type; - -/* VME_MAX_BRIDGES comes from the type of vme_bus_numbers */ -#define VME_MAX_BRIDGES (sizeof(unsigned int)*8) -#define VME_MAX_SLOTS 32 - -#define VME_SLOT_CURRENT -1 -#define VME_SLOT_ALL -2 - -/** - * Structure representing a VME device - * @num: The device number - * @bridge: Pointer to the bridge device this device is on - * @dev: Internal device structure - * @drv_list: List of devices (per driver) - * @bridge_list: List of devices (per bridge) - */ -struct vme_dev { - int num; - struct vme_bridge *bridge; - struct device dev; - struct list_head drv_list; - struct list_head bridge_list; -}; - -struct vme_driver { - struct list_head node; - const char *name; - int (*match)(struct vme_dev *); - int (*probe)(struct vme_dev *); - int (*remove)(struct vme_dev *); - void (*shutdown)(void); - struct device_driver driver; - struct list_head devices; -}; - -void *vme_alloc_consistent(struct vme_resource *, size_t, dma_addr_t *); -void vme_free_consistent(struct vme_resource *, size_t, void *, - dma_addr_t); - -size_t vme_get_size(struct vme_resource *); - -struct vme_resource *vme_slave_request(struct vme_dev *, u32, u32); -int vme_slave_set(struct vme_resource *, int, unsigned long long, - unsigned long long, dma_addr_t, u32, u32); -int vme_slave_get(struct vme_resource *, int *, unsigned long long *, - unsigned long long *, dma_addr_t *, u32 *, u32 *); -void vme_slave_free(struct vme_resource *); - -struct vme_resource *vme_master_request(struct vme_dev *, u32, u32, u32); -int vme_master_set(struct vme_resource *, int, unsigned long long, - unsigned long long, u32, u32, u32); -int vme_master_get(struct vme_resource *, int *, unsigned long long *, - unsigned long long *, u32 *, u32 *, u32 *); -ssize_t vme_master_read(struct vme_resource *, void *, size_t, loff_t); -ssize_t vme_master_write(struct vme_resource *, void *, size_t, loff_t); -unsigned int vme_master_rmw(struct vme_resource *, unsigned int, unsigned int, - unsigned int, loff_t); -void vme_master_free(struct vme_resource *); - -struct vme_resource *vme_dma_request(struct vme_dev *, u32); -struct vme_dma_list *vme_new_dma_list(struct vme_resource *); -struct vme_dma_attr *vme_dma_pattern_attribute(u32, u32); -struct vme_dma_attr *vme_dma_pci_attribute(dma_addr_t); -struct vme_dma_attr *vme_dma_vme_attribute(unsigned long long, u32, u32, u32); -void vme_dma_free_attribute(struct vme_dma_attr *); -int vme_dma_list_add(struct vme_dma_list *, struct vme_dma_attr *, - struct vme_dma_attr *, size_t); -int vme_dma_list_exec(struct vme_dma_list *); -int vme_dma_list_free(struct vme_dma_list *); -int vme_dma_free(struct vme_resource *); - -int vme_irq_request(struct vme_dev *, int, int, - void (*callback)(int, int, void *), void *); -void vme_irq_free(struct vme_dev *, int, int); -int vme_irq_generate(struct vme_dev *, int, int); - -struct vme_resource *vme_lm_request(struct vme_dev *); -int vme_lm_count(struct vme_resource *); -int vme_lm_set(struct vme_resource *, unsigned long long, u32, u32); -int vme_lm_get(struct vme_resource *, unsigned long long *, u32 *, u32 *); -int vme_lm_attach(struct vme_resource *, int, void (*callback)(int)); -int vme_lm_detach(struct vme_resource *, int); -void vme_lm_free(struct vme_resource *); - -int vme_slot_get(struct vme_dev *); - -int vme_register_driver(struct vme_driver *, unsigned int); -void vme_unregister_driver(struct vme_driver *); - - -#endif /* _VME_H_ */ - diff --git a/drivers/staging/vt6655/wpa.c b/drivers/staging/vt6655/wpa.c index 61ac46fa505..0afb9fe0379 100644 --- a/drivers/staging/vt6655/wpa.c +++ b/drivers/staging/vt6655/wpa.c @@ -148,7 +148,7 @@ WPA_ParseRSN ( { j = 0; DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"wPKCount: %d, sizeof(pBSSList->abyPKType): %zu\n", pRSN->wPKCount, sizeof(pBSSList->abyPKType)); - for(i = 0; (i < pRSN->wPKCount) && (j < sizeof(pBSSList->abyPKType)/sizeof(unsigned char)); i++) { + for(i = 0; (i < pRSN->wPKCount) && (j < ARRAY_SIZE(pBSSList->abyPKType)); i++) { if(pRSN->len >= 12+i*4+4) { //oui1(4)+ver(2)+GKS(4)+PKSCnt(2)+PKS(4*i) if ( !memcmp(pRSN->PKSList[i].abyOUI, abyOUI00, 4)) pBSSList->abyPKType[j++] = WPA_NONE; @@ -180,7 +180,7 @@ WPA_ParseRSN ( j = 0; DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"wAuthCount: %d, sizeof(pBSSList->abyAuthType): %zu\n", pIE_RSN_Auth->wAuthCount, sizeof(pBSSList->abyAuthType)); - for(i = 0; (i < pIE_RSN_Auth->wAuthCount) && (j < sizeof(pBSSList->abyAuthType)/sizeof(unsigned char)); i++) { + for(i = 0; (i < pIE_RSN_Auth->wAuthCount) && (j < ARRAY_SIZE(pBSSList->abyAuthType)); i++) { if(pRSN->len >= 14+4+(m+i)*4) { //oui1(4)+ver(2)+GKS(4)+PKSCnt(2)+PKS(4*m)+AKC(2)+AKS(4*i) if ( !memcmp(pIE_RSN_Auth->AuthKSList[i].abyOUI, abyOUI01, 4)) pBSSList->abyAuthType[j++] = WPA_AUTH_IEEE802_1X; diff --git a/drivers/staging/vt6656/ioctl.c b/drivers/staging/vt6656/ioctl.c index d59456c29df..5b9a84f9518 100644 --- a/drivers/staging/vt6656/ioctl.c +++ b/drivers/staging/vt6656/ioctl.c @@ -90,18 +90,17 @@ int private_ioctl(PSDevice pDevice, struct ifreq *rq) spin_lock_irq(&pDevice->lock); if (memcmp(pMgmt->abyCurrBSSID, &abyNullAddr[0], 6) == 0) - BSSvClearBSSList((void *)pDevice, FALSE); + BSSvClearBSSList(pDevice, FALSE); else - BSSvClearBSSList((void *)pDevice, pDevice->bLinkPass); + BSSvClearBSSList(pDevice, pDevice->bLinkPass); DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "WLAN_CMD_BSS_SCAN..begin\n"); if (pItemSSID->len != 0) - bScheduleCommand((void *)pDevice, - WLAN_CMD_BSSID_SCAN, + bScheduleCommand(pDevice, WLAN_CMD_BSSID_SCAN, abyScanSSID); else - bScheduleCommand((void *) pDevice, WLAN_CMD_BSSID_SCAN, NULL); + bScheduleCommand(pDevice, WLAN_CMD_BSSID_SCAN, NULL); spin_unlock_irq(&pDevice->lock); break; @@ -150,6 +149,7 @@ int private_ioctl(PSDevice pDevice, struct ifreq *rq) } } break; + case WLAN_CMD_BSS_JOIN: if (copy_from_user(&sJoinCmd, pReq->data, sizeof(SCmdBSSJoin))) { result = -EFAULT; @@ -190,10 +190,9 @@ int private_ioctl(PSDevice pDevice, struct ifreq *rq) netif_stop_queue(pDevice->dev); spin_lock_irq(&pDevice->lock); pMgmt->eCurrState = WMAC_STATE_IDLE; - bScheduleCommand((void *) pDevice, - WLAN_CMD_BSSID_SCAN, + bScheduleCommand(pDevice, WLAN_CMD_BSSID_SCAN, pMgmt->abyDesireSSID); - bScheduleCommand((void *) pDevice, WLAN_CMD_SSID, NULL); + bScheduleCommand(pDevice, WLAN_CMD_SSID, NULL); spin_unlock_irq(&pDevice->lock); break; @@ -299,7 +298,7 @@ int private_ioctl(PSDevice pDevice, struct ifreq *rq) result = -EINVAL; break; } - pList = (PSBSSIDList)kmalloc(sizeof(SBSSIDList) + (sList.uItem * sizeof(SBSSIDItem)), (int)GFP_ATOMIC); + pList = kmalloc(sizeof(SBSSIDList) + (sList.uItem * sizeof(SBSSIDItem)), GFP_ATOMIC); if (pList == NULL) { result = -ENOMEM; break; @@ -313,7 +312,7 @@ int private_ioctl(PSDevice pDevice, struct ifreq *rq) pList->sBSSIDList[ii].wBeaconInterval = pBSS->wBeaconInterval; pList->sBSSIDList[ii].wCapInfo = pBSS->wCapInfo; RFvRSSITodBm(pDevice, (BYTE)(pBSS->uRSSI), &ldBm); - pList->sBSSIDList[ii].uRSSI = (unsigned int) ldBm; + pList->sBSSIDList[ii].uRSSI = (unsigned int)ldBm; /* pList->sBSSIDList[ii].uRSSI = pBSS->uRSSI; */ memcpy(pList->sBSSIDList[ii].abyBSSID, pBSS->abyBSSID, WLAN_BSSID_LEN); pItemSSID = (PWLAN_IE_SSID)pBSS->abySSID; @@ -356,6 +355,7 @@ int private_ioctl(PSDevice pDevice, struct ifreq *rq) break; } break; + case WLAN_CMD_STOP_MAC: DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "WLAN_CMD_STOP_MAC\n"); /* Todo xxxxxx */ @@ -534,7 +534,7 @@ int private_ioctl(PSDevice pDevice, struct ifreq *rq) netif_stop_queue(pDevice->dev); spin_lock_irq(&pDevice->lock); - bScheduleCommand((void *)pDevice, WLAN_CMD_RUN_AP, NULL); + bScheduleCommand(pDevice, WLAN_CMD_RUN_AP, NULL); spin_unlock_irq(&pDevice->lock); break; @@ -565,7 +565,7 @@ int private_ioctl(PSDevice pDevice, struct ifreq *rq) result = -ENOMEM; break; } - pNodeList = kmalloc(sizeof(SNodeList) + (sNodeList.uItem * sizeof(SNodeItem)), (int)GFP_ATOMIC); + pNodeList = kmalloc(sizeof(SNodeList) + (sNodeList.uItem * sizeof(SNodeItem)), GFP_ATOMIC); if (pNodeList == NULL) { result = -ENOMEM; break; diff --git a/drivers/staging/vt6656/main_usb.c b/drivers/staging/vt6656/main_usb.c index 763e028a5cc..ee5261a3688 100644 --- a/drivers/staging/vt6656/main_usb.c +++ b/drivers/staging/vt6656/main_usb.c @@ -1257,9 +1257,7 @@ static void __devexit vt6656_disconnect(struct usb_interface *intf) } device_release_WPADEV(device); - - if (device->firmware) - release_firmware(device->firmware); + release_firmware(device->firmware); usb_set_intfdata(intf, NULL); usb_put_dev(interface_to_usbdev(intf)); diff --git a/drivers/staging/vt6656/wpa.c b/drivers/staging/vt6656/wpa.c index 7dde3d6941a..b16d4ddc117 100644 --- a/drivers/staging/vt6656/wpa.c +++ b/drivers/staging/vt6656/wpa.c @@ -149,7 +149,7 @@ WPA_ParseRSN( j = 0; DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"wPKCount: %d, sizeof(pBSSList->abyPKType): %zu\n", pRSN->wPKCount, sizeof(pBSSList->abyPKType)); for (i = 0; (i < pRSN->wPKCount) && - (j < sizeof(pBSSList->abyPKType)/sizeof(BYTE)); i++) { + (j < ARRAY_SIZE(pBSSList->abyPKType)); i++) { if(pRSN->len >= 12+i*4+4) { //oui1(4)+ver(2)+GKS(4)+PKSCnt(2)+PKS(4*i) if ( !memcmp(pRSN->PKSList[i].abyOUI, abyOUI00, 4)) pBSSList->abyPKType[j++] = WPA_NONE; @@ -182,7 +182,7 @@ WPA_ParseRSN( DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"wAuthCount: %d, sizeof(pBSSList->abyAuthType): %zu\n", pIE_RSN_Auth->wAuthCount, sizeof(pBSSList->abyAuthType)); for (i = 0; (i < pIE_RSN_Auth->wAuthCount) && - (j < sizeof(pBSSList->abyAuthType)/sizeof(BYTE)); i++) { + (j < ARRAY_SIZE(pBSSList->abyAuthType)); i++) { if(pRSN->len >= 14+4+(m+i)*4) { //oui1(4)+ver(2)+GKS(4)+PKSCnt(2)+PKS(4*m)+AKC(2)+AKS(4*i) if ( !memcmp(pIE_RSN_Auth->AuthKSList[i].abyOUI, abyOUI01, 4)) pBSSList->abyAuthType[j++] = WPA_AUTH_IEEE802_1X; diff --git a/drivers/staging/wlags49_h2/README.ubuntu b/drivers/staging/wlags49_h2/README.ubuntu index edee8b9385b..5f1cfb8fd42 100644 --- a/drivers/staging/wlags49_h2/README.ubuntu +++ b/drivers/staging/wlags49_h2/README.ubuntu @@ -87,7 +87,7 @@ The linux driver files (wl_xxxx.c) are changed in the following ways: -- Recovery actions added The major problem was the order in which calls can be made. The original -looks like a traditonal UNIX driver. To call an "ioctl" function you +looks like a traditional UNIX driver. To call an "ioctl" function you have to "open" the device first to get a handle and after "close" no "ioctl" function can be called anymore. With the 2.6 driver this all changed; the former ioctl functions are now called before "open" and diff --git a/drivers/staging/wlags49_h2/wl_netdev.c b/drivers/staging/wlags49_h2/wl_netdev.c index 90820ff1ace..824b8523235 100644 --- a/drivers/staging/wlags49_h2/wl_netdev.c +++ b/drivers/staging/wlags49_h2/wl_netdev.c @@ -1063,7 +1063,7 @@ void wl_multicast( struct net_device *dev ) #if DBG if( DBG_FLAGS( DbgInfo ) & DBG_PARAM_ON ) { DBG_PRINT(" flags: %s%s%s\n", - ( dev->flags & IFF_PROMISC ) ? "Promiscous " : "", + ( dev->flags & IFF_PROMISC ) ? "Promiscuous " : "", ( dev->flags & IFF_MULTICAST ) ? "Multicast " : "", ( dev->flags & IFF_ALLMULTI ) ? "All-Multicast" : "" ); @@ -1510,8 +1510,11 @@ void wl_wds_device_alloc( struct wl_private *lp ) for( count = 0; count < NUM_WDS_PORTS; count++ ) { struct net_device *dev_wds = NULL; - dev_wds = kmalloc( sizeof( struct net_device ), GFP_KERNEL ); - memset( dev_wds, 0, sizeof( struct net_device )); + dev_wds = kzalloc(sizeof(struct net_device), GFP_KERNEL); + if (!dev_wds) { + DBG_LEAVE(DbgInfo); + return; + } ether_setup( dev_wds ); diff --git a/drivers/staging/wlags49_h2/wl_pci.c b/drivers/staging/wlags49_h2/wl_pci.c index 3df990c7306..0b31b01bd49 100644 --- a/drivers/staging/wlags49_h2/wl_pci.c +++ b/drivers/staging/wlags49_h2/wl_pci.c @@ -524,6 +524,7 @@ int wl_pci_setup( struct pci_dev *pdev ) /* Make sure that space was allocated for our private adapter struct */ if( dev->priv == NULL ) { DBG_ERROR( DbgInfo, "Private adapter struct was not allocated!!!\n" ); + wl_device_dealloc(dev); DBG_LEAVE( DbgInfo ); return -ENOMEM; } @@ -532,6 +533,7 @@ int wl_pci_setup( struct pci_dev *pdev ) /* Allocate DMA Descriptors */ if( wl_pci_dma_alloc( pdev, dev->priv ) < 0 ) { DBG_ERROR( DbgInfo, "Could not allocate DMA descriptor memory!!!\n" ); + wl_device_dealloc(dev); DBG_LEAVE( DbgInfo ); return -ENOMEM; } @@ -561,6 +563,8 @@ int wl_pci_setup( struct pci_dev *pdev ) result = request_irq(dev->irq, wl_isr, SA_SHIRQ, dev->name, dev); if( result ) { DBG_WARNING( DbgInfo, "Could not register ISR!!!\n" ); + wl_remove(dev); + wl_device_dealloc(dev); DBG_LEAVE( DbgInfo ); return result; } diff --git a/drivers/staging/wlags49_h2/wl_profile.c b/drivers/staging/wlags49_h2/wl_profile.c index b8c96cf18de..0e49272bc7a 100644 --- a/drivers/staging/wlags49_h2/wl_profile.c +++ b/drivers/staging/wlags49_h2/wl_profile.c @@ -401,7 +401,7 @@ void translate_option(char *buffer, struct wl_private *lp) if ((value_convert >= PARM_MIN_BRSC) || (value_convert <= PARM_MAX_BRSC)) lp->brsc[0] = value_convert; else - DBG_WARNING(DbgInfo, "%s invaid; will be ignored\n", PARM_NAME_BRSC_2GHZ); + DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_BRSC_2GHZ); } else if (strcmp(key, PARM_NAME_BRSC_5GHZ) == 0) { DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_BRSC_5GHZ, value); @@ -409,7 +409,7 @@ void translate_option(char *buffer, struct wl_private *lp) if ((value_convert >= PARM_MIN_BRSC) || (value_convert <= PARM_MAX_BRSC)) lp->brsc[1] = value_convert; else - DBG_WARNING(DbgInfo, "%s invaid; will be ignored\n", PARM_NAME_BRSC_5GHZ); + DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_BRSC_5GHZ); } else if ((strcmp(key, PARM_NAME_DESIRED_SSID) == 0) || (strcmp(key, PARM_NAME_OWN_SSID) == 0)) { DBG_TRACE(DbgInfo, "SSID, value: %s\n", value); @@ -556,7 +556,7 @@ void translate_option(char *buffer, struct wl_private *lp) if ((value_convert >= PARM_MIN_SRSC) || (value_convert <= PARM_MAX_SRSC)) lp->srsc[0] = value_convert; else - DBG_WARNING(DbgInfo, "%s invaid; will be ignored\n", PARM_NAME_SRSC_2GHZ); + DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_SRSC_2GHZ); } else if (strcmp(key, PARM_NAME_SRSC_5GHZ) == 0) { DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_SRSC_5GHZ, value); @@ -564,7 +564,7 @@ void translate_option(char *buffer, struct wl_private *lp) if ((value_convert >= PARM_MIN_SRSC) || (value_convert <= PARM_MAX_SRSC)) lp->srsc[1] = value_convert; else - DBG_WARNING(DbgInfo, "%s invaid; will be ignored\n", PARM_NAME_SRSC_5GHZ); + DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_SRSC_5GHZ); } else if (strcmp(key, PARM_NAME_SYSTEM_SCALE) == 0) { DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_SYSTEM_SCALE, value); diff --git a/drivers/staging/wlags49_h2/wl_util.c b/drivers/staging/wlags49_h2/wl_util.c index f104e6f1e98..404ec7da034 100644 --- a/drivers/staging/wlags49_h2/wl_util.c +++ b/drivers/staging/wlags49_h2/wl_util.c @@ -98,8 +98,7 @@ ******************************************************************************/ /* A matrix which maps channels to frequencies */ -#define MAX_CHAN_FREQ_MAP_ENTRIES 50 -static const long chan_freq_list[][MAX_CHAN_FREQ_MAP_ENTRIES] = +static const long chan_freq_list[][2] = { {1,2412}, {2,2417}, @@ -846,7 +845,7 @@ int wl_is_a_valid_chan( int channel ) } /* Iterate through the matrix and retrieve the frequency */ - for( i = 0; i < MAX_CHAN_FREQ_MAP_ENTRIES; i++ ) { + for( i = 0; i < ARRAY_SIZE(chan_freq_list); i++ ) { if( chan_freq_list[i][0] == channel ) { return 1; } @@ -884,7 +883,7 @@ int wl_is_a_valid_freq( long frequency ) /* Iterate through the matrix and retrieve the channel */ - for( i = 0; i < MAX_CHAN_FREQ_MAP_ENTRIES; i++ ) { + for( i = 0; i < ARRAY_SIZE(chan_freq_list); i++ ) { if( chan_freq_list[i][1] == frequency ) { return 1; } @@ -927,7 +926,7 @@ long wl_get_freq_from_chan( int channel ) } /* Iterate through the matrix and retrieve the frequency */ - for( i = 0; i < MAX_CHAN_FREQ_MAP_ENTRIES; i++ ) { + for( i = 0; i < ARRAY_SIZE(chan_freq_list); i++ ) { if( chan_freq_list[i][0] == channel ) { return chan_freq_list[i][1]; } @@ -965,7 +964,7 @@ int wl_get_chan_from_freq( long frequency ) /* Iterate through the matrix and retrieve the channel */ - for( i = 0; i < MAX_CHAN_FREQ_MAP_ENTRIES; i++ ) { + for( i = 0; i < ARRAY_SIZE(chan_freq_list); i++ ) { if( chan_freq_list[i][1] == frequency ) { return chan_freq_list[i][0]; } diff --git a/drivers/staging/wlan-ng/cfg80211.c b/drivers/staging/wlan-ng/cfg80211.c index 4cd3ba5d564..8bc562b8c4d 100644 --- a/drivers/staging/wlan-ng/cfg80211.c +++ b/drivers/staging/wlan-ng/cfg80211.c @@ -332,6 +332,7 @@ int prism2_scan(struct wiphy *wiphy, struct net_device *dev, wlandevice_t *wlandev = dev->ml_priv; struct p80211msg_dot11req_scan msg1; struct p80211msg_dot11req_scan_results msg2; + struct cfg80211_bss *bss; int result; int err = 0; int numbss = 0; @@ -401,7 +402,7 @@ int prism2_scan(struct wiphy *wiphy, struct net_device *dev, ie_buf[1] = msg2.ssid.data.len; ie_len = ie_buf[1] + 2; memcpy(&ie_buf[2], &(msg2.ssid.data.data), msg2.ssid.data.len); - cfg80211_inform_bss(wiphy, + bss = cfg80211_inform_bss(wiphy, ieee80211_get_channel(wiphy, ieee80211_dsss_chan_to_freq(msg2.dschannel.data)), (const u8 *) &(msg2.bssid.data.data), msg2.timestamp.data, msg2.capinfo.data, @@ -411,6 +412,13 @@ int prism2_scan(struct wiphy *wiphy, struct net_device *dev, (msg2.signal.data - 65536) * 100, /* Conversion to signed type */ GFP_KERNEL ); + + if (!bss) { + err = -ENOMEM; + goto exit; + } + + cfg80211_put_bss(bss); } if (result) diff --git a/drivers/staging/wlan-ng/prism2mgmt.c b/drivers/staging/wlan-ng/prism2mgmt.c index c3bb05dd744..4efa9bc0fcf 100644 --- a/drivers/staging/wlan-ng/prism2mgmt.c +++ b/drivers/staging/wlan-ng/prism2mgmt.c @@ -380,8 +380,8 @@ int prism2mgmt_scan_results(wlandevice_t *wlandev, void *msgp) } count = (hw->scanresults->framelen - 3) / 32; - if (count > 32) - count = 32; + if (count > HFA384x_SCANRESULT_MAX) + count = HFA384x_SCANRESULT_MAX; if (req->bssindex.data >= count) { pr_debug("requested index (%d) out of range (%d)\n", diff --git a/drivers/staging/xgifb/XGI_main.h b/drivers/staging/xgifb/XGI_main.h index e828fd403c3..9c62aeb9ede 100644 --- a/drivers/staging/xgifb/XGI_main.h +++ b/drivers/staging/xgifb/XGI_main.h @@ -12,9 +12,6 @@ #define XGIFAIL(x) do { printk(x "\n"); return -EINVAL; } while (0) -#ifndef PCI_DEVICE_ID_XGI_41 -#define PCI_DEVICE_ID_XGI_41 0x041 -#endif #ifndef PCI_DEVICE_ID_XGI_42 #define PCI_DEVICE_ID_XGI_42 0x042 #endif @@ -82,177 +79,79 @@ static int XGIfb_tvplug = -1; /* TW: For ioctl XGIFB_GET_INFO */ /* XGIfb_info XGIfbinfo; */ -#define MD_XGI300 1 -#define MD_XGI315 2 +#define MD_XGI315 1 /* mode table */ static const struct _XGIbios_mode { - char name[15]; u8 mode_no; u16 vesa_mode_no_1; /* "XGI defined" VESA mode number */ u16 vesa_mode_no_2; /* Real VESA mode numbers */ u16 xres; u16 yres; u16 bpp; - u16 rate_idx; - u16 cols; - u16 rows; u8 chipset; } XGIbios_mode[] = { - {"320x240x16", 0x56, 0x0000, 0x0000, 320, 240, 16, 1, 40, 15, - MD_XGI315}, - {"320x480x8", 0x5A, 0x0000, 0x0000, 320, 480, 8, 1, 40, 30, - MD_XGI315}, /* TW: FSTN */ - {"320x480x16", 0x5B, 0x0000, 0x0000, 320, 480, 16, 1, 40, 30, - MD_XGI315}, /* TW: FSTN */ - {"640x480x8", 0x2E, 0x0101, 0x0101, 640, 480, 8, 1, 80, 30, - MD_XGI300|MD_XGI315}, - {"640x480x16", 0x44, 0x0111, 0x0111, 640, 480, 16, 1, 80, 30, - MD_XGI300|MD_XGI315}, - {"640x480x24", 0x62, 0x013a, 0x0112, 640, 480, 32, 1, 80, 30, - MD_XGI300|MD_XGI315}, /* TW: That's for people who mix up color- - and fb depth */ - {"640x480x32", 0x62, 0x013a, 0x0112, 640, 480, 32, 1, 80, 30, - MD_XGI300|MD_XGI315}, - {"720x480x8", 0x31, 0x0000, 0x0000, 720, 480, 8, 1, 90, 30, - MD_XGI300|MD_XGI315}, - {"720x480x16", 0x33, 0x0000, 0x0000, 720, 480, 16, 1, 90, 30, - MD_XGI300|MD_XGI315}, - {"720x480x24", 0x35, 0x0000, 0x0000, 720, 480, 32, 1, 90, 30, - MD_XGI300|MD_XGI315}, - {"720x480x32", 0x35, 0x0000, 0x0000, 720, 480, 32, 1, 90, 30, - MD_XGI300|MD_XGI315}, - {"720x576x8", 0x32, 0x0000, 0x0000, 720, 576, 8, 1, 90, 36, - MD_XGI300|MD_XGI315}, - {"720x576x16", 0x34, 0x0000, 0x0000, 720, 576, 16, 1, 90, 36, - MD_XGI300|MD_XGI315}, - {"720x576x24", 0x36, 0x0000, 0x0000, 720, 576, 32, 1, 90, 36, - MD_XGI300|MD_XGI315}, - {"720x576x32", 0x36, 0x0000, 0x0000, 720, 576, 32, 1, 90, 36, - MD_XGI300|MD_XGI315}, - {"800x480x8", 0x70, 0x0000, 0x0000, 800, 480, 8, 1, 100, 30, - MD_XGI300|MD_XGI315}, - {"800x480x16", 0x7a, 0x0000, 0x0000, 800, 480, 16, 1, 100, 30, - MD_XGI300|MD_XGI315}, - {"800x480x24", 0x76, 0x0000, 0x0000, 800, 480, 32, 1, 100, 30, - MD_XGI300|MD_XGI315}, - {"800x480x32", 0x76, 0x0000, 0x0000, 800, 480, 32, 1, 100, 30, - MD_XGI300|MD_XGI315}, - {"800x600x8", 0x30, 0x0103, 0x0103, 800, 600, 8, 1, 100, 37, - MD_XGI300|MD_XGI315}, -#define DEFAULT_MODE 20 /* index for 800x600x16 */ - {"800x600x16", 0x47, 0x0114, 0x0114, 800, 600, 16, 1, 100, 37, - MD_XGI300|MD_XGI315}, - {"800x600x24", 0x63, 0x013b, 0x0115, 800, 600, 32, 1, 100, 37, - MD_XGI300|MD_XGI315}, - {"800x600x32", 0x63, 0x013b, 0x0115, 800, 600, 32, 1, 100, 37, - MD_XGI300|MD_XGI315}, - {"1024x576x8", 0x71, 0x0000, 0x0000, 1024, 576, 8, 1, 128, 36, - MD_XGI300|MD_XGI315}, - {"1024x576x16", 0x74, 0x0000, 0x0000, 1024, 576, 16, 1, 128, 36, - MD_XGI300|MD_XGI315}, - {"1024x576x24", 0x77, 0x0000, 0x0000, 1024, 576, 32, 1, 128, 36, - MD_XGI300|MD_XGI315}, - {"1024x576x32", 0x77, 0x0000, 0x0000, 1024, 576, 32, 1, 128, 36, - MD_XGI300|MD_XGI315}, - {"1024x600x8", 0x20, 0x0000, 0x0000, 1024, 600, 8, 1, 128, 37, - MD_XGI300 }, /* TW: 300 series only */ - {"1024x600x16", 0x21, 0x0000, 0x0000, 1024, 600, 16, 1, 128, 37, - MD_XGI300 }, - {"1024x600x24", 0x22, 0x0000, 0x0000, 1024, 600, 32, 1, 128, 37, - MD_XGI300 }, - {"1024x600x32", 0x22, 0x0000, 0x0000, 1024, 600, 32, 1, 128, 37, - MD_XGI300 }, - {"1024x768x8", 0x38, 0x0105, 0x0105, 1024, 768, 8, 1, 128, 48, - MD_XGI300|MD_XGI315}, - {"1024x768x16", 0x4A, 0x0117, 0x0117, 1024, 768, 16, 1, 128, 48, - MD_XGI300|MD_XGI315}, - {"1024x768x24", 0x64, 0x013c, 0x0118, 1024, 768, 32, 1, 128, 48, - MD_XGI300|MD_XGI315}, - {"1024x768x32", 0x64, 0x013c, 0x0118, 1024, 768, 32, 1, 128, 48, - MD_XGI300|MD_XGI315}, - {"1152x768x8", 0x23, 0x0000, 0x0000, 1152, 768, 8, 1, 144, 48, - MD_XGI300 }, /* TW: 300 series only */ - {"1152x768x16", 0x24, 0x0000, 0x0000, 1152, 768, 16, 1, 144, 48, - MD_XGI300 }, - {"1152x768x24", 0x25, 0x0000, 0x0000, 1152, 768, 32, 1, 144, 48, - MD_XGI300 }, - {"1152x768x32", 0x25, 0x0000, 0x0000, 1152, 768, 32, 1, 144, 48, - MD_XGI300 }, - {"1280x720x8", 0x79, 0x0000, 0x0000, 1280, 720, 8, 1, 160, 45, - MD_XGI300|MD_XGI315}, - {"1280x720x16", 0x75, 0x0000, 0x0000, 1280, 720, 16, 1, 160, 45, - MD_XGI300|MD_XGI315}, - {"1280x720x24", 0x78, 0x0000, 0x0000, 1280, 720, 32, 1, 160, 45, - MD_XGI300|MD_XGI315}, - {"1280x720x32", 0x78, 0x0000, 0x0000, 1280, 720, 32, 1, 160, 45, - MD_XGI300|MD_XGI315}, - {"1280x768x8", 0x23, 0x0000, 0x0000, 1280, 768, 8, 1, 160, 48, - MD_XGI315}, /* TW: 310/325 series only */ - {"1280x768x16", 0x24, 0x0000, 0x0000, 1280, 768, 16, 1, 160, 48, - MD_XGI315}, - {"1280x768x24", 0x25, 0x0000, 0x0000, 1280, 768, 32, 1, 160, 48, - MD_XGI315}, - {"1280x768x32", 0x25, 0x0000, 0x0000, 1280, 768, 32, 1, 160, 48, - MD_XGI315}, - {"1280x960x8", 0x7C, 0x0000, 0x0000, 1280, 960, 8, 1, 160, 60, - MD_XGI300|MD_XGI315}, - {"1280x960x16", 0x7D, 0x0000, 0x0000, 1280, 960, 16, 1, 160, 60, - MD_XGI300|MD_XGI315}, - {"1280x960x24", 0x7E, 0x0000, 0x0000, 1280, 960, 32, 1, 160, 60, - MD_XGI300|MD_XGI315}, - {"1280x960x32", 0x7E, 0x0000, 0x0000, 1280, 960, 32, 1, 160, 60, - MD_XGI300|MD_XGI315}, - {"1280x1024x8", 0x3A, 0x0107, 0x0107, 1280, 1024, 8, 1, 160, 64, - MD_XGI300|MD_XGI315}, - {"1280x1024x16", 0x4D, 0x011a, 0x011a, 1280, 1024, 16, 1, 160, 64, - MD_XGI300|MD_XGI315}, - {"1280x1024x24", 0x65, 0x013d, 0x011b, 1280, 1024, 32, 1, 160, 64, - MD_XGI300|MD_XGI315}, - {"1280x1024x32", 0x65, 0x013d, 0x011b, 1280, 1024, 32, 1, 160, 64, - MD_XGI300|MD_XGI315}, - {"1400x1050x8", 0x26, 0x0000, 0x0000, 1400, 1050, 8, 1, 175, 65, - MD_XGI315}, /* TW: 310/325 series only */ - {"1400x1050x16", 0x27, 0x0000, 0x0000, 1400, 1050, 16, 1, 175, 65, - MD_XGI315}, - {"1400x1050x24", 0x28, 0x0000, 0x0000, 1400, 1050, 32, 1, 175, 65, - MD_XGI315}, - {"1400x1050x32", 0x28, 0x0000, 0x0000, 1400, 1050, 32, 1, 175, 65, - MD_XGI315}, - {"1600x1200x8", 0x3C, 0x0130, 0x011c, 1600, 1200, 8, 1, 200, 75, - MD_XGI300|MD_XGI315}, - {"1600x1200x16", 0x3D, 0x0131, 0x011e, 1600, 1200, 16, 1, 200, 75, - MD_XGI300|MD_XGI315}, - {"1600x1200x24", 0x66, 0x013e, 0x011f, 1600, 1200, 32, 1, 200, 75, - MD_XGI300|MD_XGI315}, - {"1600x1200x32", 0x66, 0x013e, 0x011f, 1600, 1200, 32, 1, 200, 75, - MD_XGI300|MD_XGI315}, - {"1920x1440x8", 0x68, 0x013f, 0x0000, 1920, 1440, 8, 1, 240, 75, - MD_XGI300|MD_XGI315}, - {"1920x1440x16", 0x69, 0x0140, 0x0000, 1920, 1440, 16, 1, 240, 75, - MD_XGI300|MD_XGI315}, - {"1920x1440x24", 0x6B, 0x0141, 0x0000, 1920, 1440, 32, 1, 240, 75, - MD_XGI300|MD_XGI315}, - {"1920x1440x32", 0x6B, 0x0141, 0x0000, 1920, 1440, 32, 1, 240, 75, - MD_XGI300|MD_XGI315}, - {"2048x1536x8", 0x6c, 0x0000, 0x0000, 2048, 1536, 8, 1, 256, 96, - MD_XGI315}, /* TW: 310/325 series only */ - {"2048x1536x16", 0x6d, 0x0000, 0x0000, 2048, 1536, 16, 1, 256, 96, - MD_XGI315}, - {"2048x1536x24", 0x6e, 0x0000, 0x0000, 2048, 1536, 32, 1, 256, 96, - MD_XGI315}, - {"2048x1536x32", 0x6e, 0x0000, 0x0000, 2048, 1536, 32, 1, 256, 96, - MD_XGI315}, - {"\0", 0x00, 0, 0, 0, 0, 0, 0, 0} + { 0x56, 0x0000, 0x0000, 320, 240, 16, MD_XGI315 }, + { 0x5A, 0x0000, 0x0000, 320, 480, 8, MD_XGI315 }, + { 0x5B, 0x0000, 0x0000, 320, 480, 16, MD_XGI315 }, + { 0x2E, 0x0101, 0x0101, 640, 480, 8, MD_XGI315 }, + { 0x44, 0x0111, 0x0111, 640, 480, 16, MD_XGI315 }, + { 0x62, 0x013a, 0x0112, 640, 480, 32, MD_XGI315 }, + { 0x31, 0x0000, 0x0000, 720, 480, 8, MD_XGI315 }, + { 0x33, 0x0000, 0x0000, 720, 480, 16, MD_XGI315 }, + { 0x35, 0x0000, 0x0000, 720, 480, 32, MD_XGI315 }, + { 0x32, 0x0000, 0x0000, 720, 576, 8, MD_XGI315 }, + { 0x34, 0x0000, 0x0000, 720, 576, 16, MD_XGI315 }, + { 0x36, 0x0000, 0x0000, 720, 576, 32, MD_XGI315 }, + { 0x36, 0x0000, 0x0000, 720, 576, 32, MD_XGI315 }, + { 0x70, 0x0000, 0x0000, 800, 480, 8, MD_XGI315 }, + { 0x7a, 0x0000, 0x0000, 800, 480, 16, MD_XGI315 }, + { 0x76, 0x0000, 0x0000, 800, 480, 32, MD_XGI315 }, + { 0x30, 0x0103, 0x0103, 800, 600, 8, MD_XGI315 }, +#define DEFAULT_MODE 17 /* index for 800x600x16 */ + { 0x47, 0x0114, 0x0114, 800, 600, 16, MD_XGI315 }, + { 0x63, 0x013b, 0x0115, 800, 600, 32, MD_XGI315 }, + { 0x71, 0x0000, 0x0000, 1024, 576, 8, MD_XGI315 }, + { 0x74, 0x0000, 0x0000, 1024, 576, 16, MD_XGI315 }, + { 0x77, 0x0000, 0x0000, 1024, 576, 32, MD_XGI315 }, + { 0x77, 0x0000, 0x0000, 1024, 576, 32, MD_XGI315 }, + { 0x20, 0x0000, 0x0000, 1024, 600, 8, }, + { 0x21, 0x0000, 0x0000, 1024, 600, 16, }, + { 0x22, 0x0000, 0x0000, 1024, 600, 32, }, + { 0x38, 0x0105, 0x0105, 1024, 768, 8, MD_XGI315 }, + { 0x4A, 0x0117, 0x0117, 1024, 768, 16, MD_XGI315 }, + { 0x64, 0x013c, 0x0118, 1024, 768, 32, MD_XGI315 }, + { 0x64, 0x013c, 0x0118, 1024, 768, 32, MD_XGI315 }, + { 0x23, 0x0000, 0x0000, 1152, 768, 8, }, + { 0x24, 0x0000, 0x0000, 1152, 768, 16, }, + { 0x25, 0x0000, 0x0000, 1152, 768, 32, }, + { 0x79, 0x0000, 0x0000, 1280, 720, 8, MD_XGI315 }, + { 0x75, 0x0000, 0x0000, 1280, 720, 16, MD_XGI315 }, + { 0x78, 0x0000, 0x0000, 1280, 720, 32, MD_XGI315 }, + { 0x23, 0x0000, 0x0000, 1280, 768, 8, MD_XGI315 }, + { 0x24, 0x0000, 0x0000, 1280, 768, 16, MD_XGI315 }, + { 0x25, 0x0000, 0x0000, 1280, 768, 32, MD_XGI315 }, + { 0x7C, 0x0000, 0x0000, 1280, 960, 8, MD_XGI315 }, + { 0x7D, 0x0000, 0x0000, 1280, 960, 16, MD_XGI315 }, + { 0x7E, 0x0000, 0x0000, 1280, 960, 32, MD_XGI315 }, + { 0x3A, 0x0107, 0x0107, 1280, 1024, 8, MD_XGI315 }, + { 0x4D, 0x011a, 0x011a, 1280, 1024, 16, MD_XGI315 }, + { 0x65, 0x013d, 0x011b, 1280, 1024, 32, MD_XGI315 }, + { 0x26, 0x0000, 0x0000, 1400, 1050, 8, MD_XGI315 }, + { 0x27, 0x0000, 0x0000, 1400, 1050, 16, MD_XGI315 }, + { 0x28, 0x0000, 0x0000, 1400, 1050, 32, MD_XGI315 }, + { 0x3C, 0x0130, 0x011c, 1600, 1200, 8, MD_XGI315 }, + { 0x3D, 0x0131, 0x011e, 1600, 1200, 16, MD_XGI315 }, + { 0x66, 0x013e, 0x011f, 1600, 1200, 32, MD_XGI315 }, + { 0x68, 0x013f, 0x0000, 1920, 1440, 8, MD_XGI315 }, + { 0x69, 0x0140, 0x0000, 1920, 1440, 16, MD_XGI315 }, + { 0x6B, 0x0141, 0x0000, 1920, 1440, 32, MD_XGI315 }, + { 0x6c, 0x0000, 0x0000, 2048, 1536, 8, MD_XGI315 }, + { 0x6d, 0x0000, 0x0000, 2048, 1536, 16, MD_XGI315 }, + { 0x6e, 0x0000, 0x0000, 2048, 1536, 32, MD_XGI315 }, + { 0 }, }; -/* TW: CR36 evaluation */ -static const unsigned short XGI300paneltype[] = { - LCD_UNKNOWN, LCD_800x600, LCD_1024x768, LCD_1280x1024, - LCD_1280x960, LCD_640x480, LCD_1024x600, LCD_1152x768, - LCD_1024x768, LCD_1024x768, LCD_1024x768, - LCD_1024x768, LCD_1024x768, LCD_1024x768, LCD_1024x768}; - static const unsigned short XGI310paneltype[] = { LCD_UNKNOWN, LCD_800x600, LCD_1024x768, LCD_1280x1024, LCD_640x480, LCD_1024x600, LCD_1152x864, LCD_1280x960, diff --git a/drivers/staging/xgifb/XGI_main_26.c b/drivers/staging/xgifb/XGI_main_26.c index 21c037827de..85dbf32b1f6 100644 --- a/drivers/staging/xgifb/XGI_main_26.c +++ b/drivers/staging/xgifb/XGI_main_26.c @@ -156,25 +156,14 @@ static int XGIfb_mode_rate_to_dclock(struct vb_device_info *XGI_Pr, unsigned short ModeNo = modeno; unsigned short ModeIdIndex = 0, ClockIndex = 0; unsigned short RefreshRateTableIndex = 0; - - /* unsigned long temp = 0; */ int Clock; InitTo330Pointer(HwDeviceExtension->jChipType, XGI_Pr); + XGI_SearchModeID(ModeNo, &ModeIdIndex, XGI_Pr); + RefreshRateTableIndex = XGI_GetRatePtrCRT2(HwDeviceExtension, ModeNo, ModeIdIndex, XGI_Pr); - /* - temp = XGI_SearchModeID(ModeNo , &ModeIdIndex, XGI_Pr) ; - if (!temp) { - printk(KERN_ERR "Could not find mode %x\n", ModeNo); - return 65000; - } - - RefreshRateTableIndex = XGI_Pr->EModeIDTable[ModeIdIndex].REFindex; - RefreshRateTableIndex += (rateindex - 1); - - */ ClockIndex = XGI_Pr->RefIndex[RefreshRateTableIndex].Ext_CRTVCLK; Clock = XGI_Pr->VCLKData[ClockIndex].CLOCK * 1000; @@ -190,7 +179,7 @@ static int XGIfb_mode_rate_to_ddata(struct vb_device_info *XGI_Pr, u32 *vmode) { unsigned short ModeNo = modeno; - unsigned short ModeIdIndex = 0, index = 0; + unsigned short ModeIdIndex, index = 0; unsigned short RefreshRateTableIndex = 0; unsigned short VRE, VBE, VRS, VBS, VDE, VT; @@ -199,16 +188,10 @@ static int XGIfb_mode_rate_to_ddata(struct vb_device_info *XGI_Pr, unsigned long cr_data3; int A, B, C, D, E, F, temp, j; InitTo330Pointer(HwDeviceExtension->jChipType, XGI_Pr); + if (!XGI_SearchModeID(ModeNo, &ModeIdIndex, XGI_Pr)) + return 0; RefreshRateTableIndex = XGI_GetRatePtrCRT2(HwDeviceExtension, ModeNo, ModeIdIndex, XGI_Pr); - /* - temp = XGI_SearchModeID(ModeNo, &ModeIdIndex, XGI_Pr); - if (!temp) - return 0; - - RefreshRateTableIndex = XGI_Pr->EModeIDTable[ModeIdIndex].REFindex; - RefreshRateTableIndex += (rateindex - 1); - */ index = XGI_Pr->RefIndex[RefreshRateTableIndex].Ext_CRT1CRTC; sr_data = XGI_Pr->XGINEWUB_CRT1Table[index].CR[5]; @@ -219,12 +202,6 @@ static int XGIfb_mode_rate_to_ddata(struct vb_device_info *XGI_Pr, HT = (cr_data & 0xff) | ((unsigned short) (sr_data & 0x03) << 8); A = HT + 5; - /* - cr_data = XGI_Pr->XGINEWUB_CRT1Table[index].CR[1]; - - Horizontal display enable end - HDE = (cr_data & 0xff) | ((unsigned short) (sr_data & 0x0C) << 6); - */ HDE = (XGI_Pr->RefIndex[RefreshRateTableIndex].XRes >> 3) - 1; E = HDE + 1; @@ -358,7 +335,6 @@ static int XGIfb_mode_rate_to_ddata(struct vb_device_info *XGI_Pr, static void XGIRegInit(struct vb_device_info *XGI_Pr, unsigned long BaseAddr) { - XGI_Pr->RelIO = BaseAddr; XGI_Pr->P3c4 = BaseAddr + 0x14; XGI_Pr->P3d4 = BaseAddr + 0x24; XGI_Pr->P3c0 = BaseAddr + 0x10; @@ -414,19 +390,26 @@ static int XGIfb_GetXG21DefaultLVDSModeIdx(struct xgifb_video_info *xgifb_info) static void XGIfb_search_mode(struct xgifb_video_info *xgifb_info, const char *name) { - int i = 0, j = 0, l; + unsigned int xres; + unsigned int yres; + unsigned int bpp; + int i; - while (XGIbios_mode[i].mode_no != 0) { - l = min(strlen(name), strlen(XGIbios_mode[i].name)); - if (!strncmp(name, XGIbios_mode[i].name, l)) { + if (sscanf(name, "%ux%ux%u", &xres, &yres, &bpp) != 3) + goto invalid_mode; + + if (bpp == 24) + bpp = 32; /* That's for people who mix up color and fb depth. */ + + for (i = 0; XGIbios_mode[i].mode_no != 0; i++) + if (XGIbios_mode[i].xres == xres && + XGIbios_mode[i].yres == yres && + XGIbios_mode[i].bpp == bpp) { xgifb_info->mode_idx = i; - j = 1; - break; + return; } - i++; - } - if (!j) - pr_info("Invalid mode '%s'\n", name); +invalid_mode: + pr_info("Invalid mode '%s'\n", name); } static void XGIfb_search_vesamode(struct xgifb_video_info *xgifb_info, @@ -1088,7 +1071,7 @@ static int XGIfb_do_set_var(struct fb_var_screeninfo *var, int isactive, unsigned int vtotal = var->upper_margin + var->yres + var->lower_margin + var->vsync_len; #if defined(__powerpc__) - u8 sr_data, cr_data; + u8 cr_data; #endif unsigned int drate = 0, hrate = 0; int found_mode = 0; @@ -1162,8 +1145,7 @@ static int XGIfb_do_set_var(struct fb_var_screeninfo *var, int isactive, if (XGIfb_search_refresh_rate(xgifb_info, xgifb_info->refresh_rate) == 0) { - xgifb_info->rate_idx = - XGIbios_mode[xgifb_info->mode_idx].rate_idx; + xgifb_info->rate_idx = 1; xgifb_info->refresh_rate = 60; } @@ -1680,17 +1662,6 @@ static int XGIfb_get_dram_size(struct xgifb_video_info *xgifb_info) ChannelNum = 1; break; - case XG45: - if (tmp == 1) - ChannelNum = 2; - else if (tmp == 2) - ChannelNum = 3; - else if (tmp == 3) - ChannelNum = 4; - else - ChannelNum = 1; - break; - case XG40: default: if (tmp == 2) @@ -1911,11 +1882,9 @@ static int __devinit xgifb_probe(struct pci_dev *pdev, xgifb_info->mmio_base = pci_resource_start(pdev, 1); xgifb_info->mmio_size = pci_resource_len(pdev, 1); xgifb_info->vga_base = pci_resource_start(pdev, 2) + 0x30; - hw_info->pjIOAddress = (unsigned char *)xgifb_info->vga_base; - /* XGI_Pr.RelIO = ioremap(pci_resource_start(pdev, 2), 128) + 0x30; */ - pr_info("Relocate IO address: %lx [%08lx]\n", - (unsigned long)pci_resource_start(pdev, 2), - xgifb_info->dev_info.RelIO); + pr_info("Relocate IO address: %Lx [%08lx]\n", + (u64) pci_resource_start(pdev, 2), + xgifb_info->vga_base); if (pci_enable_device(pdev)) { ret = -EIO; @@ -1927,7 +1896,7 @@ static int __devinit xgifb_probe(struct pci_dev *pdev, xgifb_info->display2_force = true; } - XGIRegInit(&xgifb_info->dev_info, (unsigned long)hw_info->pjIOAddress); + XGIRegInit(&xgifb_info->dev_info, xgifb_info->vga_base); xgifb_reg_set(XGISR, IND_SIS_PASSWORD, SIS_PASSWORD); reg1 = xgifb_reg_get(XGISR, IND_SIS_PASSWORD); @@ -1950,9 +1919,6 @@ static int __devinit xgifb_probe(struct pci_dev *pdev, case PCI_DEVICE_ID_XGI_40: xgifb_info->chip = XG40; break; - case PCI_DEVICE_ID_XGI_41: - xgifb_info->chip = XG41; - break; case PCI_DEVICE_ID_XGI_42: xgifb_info->chip = XG42; break; @@ -2006,13 +1972,13 @@ static int __devinit xgifb_probe(struct pci_dev *pdev, xgifb_info->mmio_vbase = ioremap(xgifb_info->mmio_base, xgifb_info->mmio_size); - pr_info("Framebuffer at 0x%lx, mapped to 0x%p, size %dk\n", - xgifb_info->video_base, + pr_info("Framebuffer at 0x%Lx, mapped to 0x%p, size %dk\n", + (u64) xgifb_info->video_base, xgifb_info->video_vbase, xgifb_info->video_size / 1024); - pr_info("MMIO at 0x%lx, mapped to 0x%p, size %ldk\n", - xgifb_info->mmio_base, xgifb_info->mmio_vbase, + pr_info("MMIO at 0x%Lx, mapped to 0x%p, size %ldk\n", + (u64) xgifb_info->mmio_base, xgifb_info->mmio_vbase, xgifb_info->mmio_size / 1024); pci_set_drvdata(pdev, xgifb_info); @@ -2174,8 +2140,7 @@ static int __devinit xgifb_probe(struct pci_dev *pdev, xgifb_info->refresh_rate = 60; if (XGIfb_search_refresh_rate(xgifb_info, xgifb_info->refresh_rate) == 0) { - xgifb_info->rate_idx = - XGIbios_mode[xgifb_info->mode_idx].rate_idx; + xgifb_info->rate_idx = 1; xgifb_info->refresh_rate = 60; } diff --git a/drivers/staging/xgifb/XGIfb.h b/drivers/staging/xgifb/XGIfb.h index 37bb730de04..9068c5ad76e 100644 --- a/drivers/staging/xgifb/XGIfb.h +++ b/drivers/staging/xgifb/XGIfb.h @@ -23,9 +23,7 @@ enum xgifb_display_type { enum XGI_CHIP_TYPE { XG40 = 32, - XG41, XG42, - XG45, XG20 = 48, XG21, XG27, @@ -66,9 +64,9 @@ struct xgifb_video_info { int chip_id; unsigned int video_size; - unsigned long video_base; + phys_addr_t video_base; void __iomem *video_vbase; - unsigned long mmio_base; + phys_addr_t mmio_base; unsigned long mmio_size; void __iomem *mmio_vbase; unsigned long vga_base; diff --git a/drivers/staging/xgifb/vb_init.c b/drivers/staging/xgifb/vb_init.c index 3650bbff768..c222d611431 100644 --- a/drivers/staging/xgifb/vb_init.c +++ b/drivers/staging/xgifb/vb_init.c @@ -353,7 +353,6 @@ static void XGINew_DDR1x_DefaultRegister( XGINew_SetMemoryClock(HwDeviceExtension, pVBInfo); switch (HwDeviceExtension->jChipType) { - case XG41: case XG42: /* CR82 */ xgifb_reg_set(P3d4, @@ -556,8 +555,7 @@ static void XGINew_SetDRAMDefaultRegister340( xgifb_reg_set(P3d4, (0x8A + j), pVBInfo->CR40[1 + j][pVBInfo->ram_type]); - if ((HwDeviceExtension->jChipType == XG41) || - (HwDeviceExtension->jChipType == XG42)) + if (HwDeviceExtension->jChipType == XG42) xgifb_reg_set(P3d4, 0x8C, 0x87); xgifb_reg_set(P3d4, @@ -854,78 +852,6 @@ static void XGINew_CheckChannel(struct xgi_hw_device_info *HwDeviceExtension, pVBInfo->ram_channel = 1; /* Single channel */ xgifb_reg_set(pVBInfo->P3c4, 0x14, 0x51); /* 32Mx16 bit*/ break; - case XG41: - if (XGINew_CheckFrequence(pVBInfo) == 1) { - pVBInfo->ram_bus = 32; /* 32 bits */ - pVBInfo->ram_channel = 3; /* Quad Channel */ - xgifb_reg_set(pVBInfo->P3c4, 0x13, 0xA1); - xgifb_reg_set(pVBInfo->P3c4, 0x14, 0x4C); - - if (XGINew_ReadWriteRest(25, 23, pVBInfo) == 1) - return; - - pVBInfo->ram_channel = 2; /* Dual channels */ - xgifb_reg_set(pVBInfo->P3c4, 0x14, 0x48); - - if (XGINew_ReadWriteRest(24, 23, pVBInfo) == 1) - return; - - xgifb_reg_set(pVBInfo->P3c4, 0x14, 0x49); - - if (XGINew_ReadWriteRest(24, 23, pVBInfo) == 1) - return; - - pVBInfo->ram_channel = 3; - xgifb_reg_set(pVBInfo->P3c4, 0x13, 0x21); - xgifb_reg_set(pVBInfo->P3c4, 0x14, 0x3C); - - if (XGINew_ReadWriteRest(24, 23, pVBInfo) == 1) - return; - - xgifb_reg_set(pVBInfo->P3c4, 0x14, 0x38); - - if (XGINew_ReadWriteRest(8, 4, pVBInfo) == 1) - return; - else - xgifb_reg_set(pVBInfo->P3c4, 0x14, 0x39); - } else { /* DDR */ - pVBInfo->ram_bus = 64; /* 64 bits */ - pVBInfo->ram_channel = 2; /* Dual channels */ - xgifb_reg_set(pVBInfo->P3c4, 0x13, 0xA1); - xgifb_reg_set(pVBInfo->P3c4, 0x14, 0x5A); - - if (XGINew_ReadWriteRest(25, 24, pVBInfo) == 1) - return; - - pVBInfo->ram_channel = 1; /* Single channels */ - xgifb_reg_set(pVBInfo->P3c4, 0x14, 0x52); - - if (XGINew_ReadWriteRest(24, 23, pVBInfo) == 1) - return; - - xgifb_reg_set(pVBInfo->P3c4, 0x14, 0x53); - - if (XGINew_ReadWriteRest(24, 23, pVBInfo) == 1) - return; - - pVBInfo->ram_channel = 2; /* Dual channels */ - xgifb_reg_set(pVBInfo->P3c4, 0x13, 0x21); - xgifb_reg_set(pVBInfo->P3c4, 0x14, 0x4A); - - if (XGINew_ReadWriteRest(24, 23, pVBInfo) == 1) - return; - - pVBInfo->ram_channel = 1; /* Single channels */ - xgifb_reg_set(pVBInfo->P3c4, 0x14, 0x42); - - if (XGINew_ReadWriteRest(8, 4, pVBInfo) == 1) - return; - else - xgifb_reg_set(pVBInfo->P3c4, 0x14, 0x43); - } - - break; - case XG42: /* XG42 SR14 D[3] Reserve @@ -1478,7 +1404,7 @@ unsigned char XGIInitNew(struct pci_dev *pdev) pVBInfo->FBAddr = HwDeviceExtension->pjVideoMemoryAddress; - pVBInfo->BaseAddr = (unsigned long) HwDeviceExtension->pjIOAddress; + pVBInfo->BaseAddr = xgifb_info->vga_base; /* Newdebugcode(0x99); */ diff --git a/drivers/staging/xgifb/vb_setmode.c b/drivers/staging/xgifb/vb_setmode.c index 60d4adf9992..b2f4338b110 100644 --- a/drivers/staging/xgifb/vb_setmode.c +++ b/drivers/staging/xgifb/vb_setmode.c @@ -16,36 +16,6 @@ #define IndexMask 0xff -static const unsigned short XGINew_MDA_DAC[] = { - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x15, - 0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x15, - 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x15, - 0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x15, - 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F}; - -static const unsigned short XGINew_CGA_DAC[] = { - 0x00, 0x10, 0x04, 0x14, 0x01, 0x11, 0x09, 0x15, - 0x00, 0x10, 0x04, 0x14, 0x01, 0x11, 0x09, 0x15, - 0x2A, 0x3A, 0x2E, 0x3E, 0x2B, 0x3B, 0x2F, 0x3F, - 0x2A, 0x3A, 0x2E, 0x3E, 0x2B, 0x3B, 0x2F, 0x3F, - 0x00, 0x10, 0x04, 0x14, 0x01, 0x11, 0x09, 0x15, - 0x00, 0x10, 0x04, 0x14, 0x01, 0x11, 0x09, 0x15, - 0x2A, 0x3A, 0x2E, 0x3E, 0x2B, 0x3B, 0x2F, 0x3F, - 0x2A, 0x3A, 0x2E, 0x3E, 0x2B, 0x3B, 0x2F, 0x3F}; - -static const unsigned short XGINew_EGA_DAC[] = { - 0x00, 0x10, 0x04, 0x14, 0x01, 0x11, 0x05, 0x15, - 0x20, 0x30, 0x24, 0x34, 0x21, 0x31, 0x25, 0x35, - 0x08, 0x18, 0x0C, 0x1C, 0x09, 0x19, 0x0D, 0x1D, - 0x28, 0x38, 0x2C, 0x3C, 0x29, 0x39, 0x2D, 0x3D, - 0x02, 0x12, 0x06, 0x16, 0x03, 0x13, 0x07, 0x17, - 0x22, 0x32, 0x26, 0x36, 0x23, 0x33, 0x27, 0x37, - 0x0A, 0x1A, 0x0E, 0x1E, 0x0B, 0x1B, 0x0F, 0x1F, - 0x2A, 0x3A, 0x2E, 0x3E, 0x2B, 0x3B, 0x2F, 0x3F}; - static const unsigned short XGINew_VGA_DAC[] = { 0x00, 0x10, 0x04, 0x14, 0x01, 0x11, 0x09, 0x15, 0x2A, 0x3A, 0x2E, 0x3E, 0x2B, 0x3B, 0x2F, 0x3F, @@ -60,8 +30,7 @@ static const unsigned short XGINew_VGA_DAC[] = { void InitTo330Pointer(unsigned char ChipType, struct vb_device_info *pVBInfo) { - pVBInfo->SModeIDTable = (struct XGI_StStruct *) XGI330_SModeIDTable; - pVBInfo->StandTable = (struct SiS_StandTable_S *) XGI330_StandTable; + pVBInfo->StandTable = (struct SiS_StandTable_S *) &XGI330_StandTable; pVBInfo->EModeIDTable = (struct XGI_ExtStruct *) XGI330_EModeIDTable; pVBInfo->RefIndex = (struct XGI_Ext2Struct *) XGI330_RefIndex; pVBInfo->XGINEWUB_CRT1Table @@ -182,38 +151,17 @@ void InitTo330Pointer(unsigned char ChipType, struct vb_device_info *pVBInfo) } -static unsigned char XGI_GetModePtr(unsigned short ModeNo, - unsigned short ModeIdIndex, - struct vb_device_info *pVBInfo) -{ - unsigned char index; - - if (ModeNo <= 0x13) - index = pVBInfo->SModeIDTable[ModeIdIndex].St_StTableIndex; - else { - if (pVBInfo->ModeType <= 0x02) - index = 0x1B; /* 02 -> ModeEGA */ - else - index = 0x0F; - } - return index; /* Get pVBInfo->StandTable index */ -} - static void XGI_SetSeqRegs(unsigned short ModeNo, - unsigned short StandTableIndex, unsigned short ModeIdIndex, struct vb_device_info *pVBInfo) { unsigned char tempah, SRdata; unsigned short i, modeflag; - if (ModeNo <= 0x13) - modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag; - else - modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag; + modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag; xgifb_reg_set(pVBInfo->P3c4, 0x00, 0x03); /* Set SR0 */ - tempah = pVBInfo->StandTable[StandTableIndex].SR[0]; + tempah = pVBInfo->StandTable->SR[0]; i = XGI_SetCRT2ToLCDA; if (pVBInfo->VBInfo & XGI_SetCRT2ToLCDA) { @@ -230,13 +178,12 @@ static void XGI_SetSeqRegs(unsigned short ModeNo, for (i = 02; i <= 04; i++) { /* Get SR2,3,4 from file */ - SRdata = pVBInfo->StandTable[StandTableIndex].SR[i - 1]; + SRdata = pVBInfo->StandTable->SR[i - 1]; xgifb_reg_set(pVBInfo->P3c4, i, SRdata); /* Set SR2 3 4 */ } } static void XGI_SetCRTCRegs(struct xgi_hw_device_info *HwDeviceExtension, - unsigned short StandTableIndex, struct vb_device_info *pVBInfo) { unsigned char CRTCdata; @@ -248,26 +195,22 @@ static void XGI_SetCRTCRegs(struct xgi_hw_device_info *HwDeviceExtension, for (i = 0; i <= 0x18; i++) { /* Get CRTC from file */ - CRTCdata = pVBInfo->StandTable[StandTableIndex].CRTC[i]; + CRTCdata = pVBInfo->StandTable->CRTC[i]; xgifb_reg_set(pVBInfo->P3d4, i, CRTCdata); /* Set CRTC(3d4) */ } } static void XGI_SetATTRegs(unsigned short ModeNo, - unsigned short StandTableIndex, unsigned short ModeIdIndex, struct vb_device_info *pVBInfo) { unsigned char ARdata; unsigned short i, modeflag; - if (ModeNo <= 0x13) - modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag; - else - modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag; + modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag; for (i = 0; i <= 0x13; i++) { - ARdata = pVBInfo->StandTable[StandTableIndex].ATTR[i]; + ARdata = pVBInfo->StandTable->ATTR[i]; if (modeflag & Charx8Dot) { /* ifndef Dot9 */ if (i == 0x13) { if (pVBInfo->VBInfo & XGI_SetCRT2ToLCDA) { @@ -295,15 +238,14 @@ static void XGI_SetATTRegs(unsigned short ModeNo, outb(0x20, pVBInfo->P3c0); } -static void XGI_SetGRCRegs(unsigned short StandTableIndex, - struct vb_device_info *pVBInfo) +static void XGI_SetGRCRegs(struct vb_device_info *pVBInfo) { unsigned char GRdata; unsigned short i; for (i = 0; i <= 0x08; i++) { /* Get GR from file */ - GRdata = pVBInfo->StandTable[StandTableIndex].GRC[i]; + GRdata = pVBInfo->StandTable->GRC[i]; xgifb_reg_set(pVBInfo->P3ce, i, GRdata); /* Set GR(3ce) */ } @@ -344,12 +286,7 @@ static unsigned char XGI_AjustCRT2Rate(unsigned short ModeNo, { unsigned short tempax, tempbx, resinfo, modeflag, infoflag; - if (ModeNo <= 0x13) - /* si+St_ModeFlag */ - modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag; - else - modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag; - + modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag; resinfo = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO; tempbx = pVBInfo->RefIndex[RefreshRateTableIndex + (*i)].ModeID; tempax = 0; @@ -584,11 +521,7 @@ static void XGI_SetCRT1Timing_V(unsigned short ModeIdIndex, data &= 0x80; data = data >> 2; - if (ModeNo <= 0x13) - i = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag; - else - i = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag; - + i = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag; i &= DoubleScanMode; if (i) data |= 0x80; @@ -641,158 +574,97 @@ static void XGI_SetXG21CRTC(unsigned short ModeNo, unsigned short ModeIdIndex, unsigned short RefreshRateTableIndex, struct vb_device_info *pVBInfo) { - unsigned char StandTableIndex, index, Tempax, Tempbx, Tempcx, Tempdx; + unsigned char index, Tempax, Tempbx, Tempcx, Tempdx; unsigned short Temp1, Temp2, Temp3; - if (ModeNo <= 0x13) { - StandTableIndex = XGI_GetModePtr(ModeNo, ModeIdIndex, pVBInfo); - /* CR04 HRS */ - Tempax = pVBInfo->StandTable[StandTableIndex].CRTC[4]; - /* SR2E [7:0]->HRS */ - xgifb_reg_set(pVBInfo->P3c4, 0x2E, Tempax); - /* Tempbx: CR05 HRE */ - Tempbx = pVBInfo->StandTable[StandTableIndex].CRTC[5]; - Tempbx &= 0x1F; /* Tempbx: HRE[4:0] */ - Tempcx = Tempax; - Tempcx &= 0xE0; /* Tempcx: HRS[7:5] */ - Tempdx = Tempcx | Tempbx; /* Tempdx(HRE): HRS[7:5]HRE[4:0] */ - if (Tempbx < (Tempax & 0x1F)) /* IF HRE < HRS */ - Tempdx |= 0x20; /* Tempdx: HRE = HRE + 0x20 */ - Tempdx <<= 2; /* Tempdx << 2 */ - /* SR2F [7:2]->HRE */ - xgifb_reg_set(pVBInfo->P3c4, 0x2F, Tempdx); - xgifb_reg_and_or(pVBInfo->P3c4, 0x30, 0xE3, 00); - - /* Tempax: CR16 VRS */ - Tempax = pVBInfo->StandTable[StandTableIndex].CRTC[16]; - Tempbx = Tempax; /* Tempbx=Tempax */ - Tempax &= 0x01; /* Tempax: VRS[0] */ - xgifb_reg_or(pVBInfo->P3c4, 0x33, Tempax); /* SR33[0]->VRS */ - - /* Tempax: CR7 VRS */ - Tempax = pVBInfo->StandTable[StandTableIndex].CRTC[7]; - Tempdx = Tempbx >> 1; /* Tempdx: VRS[7:1] */ - Tempcx = Tempax & 0x04; /* Tempcx: CR7[2] */ - Tempcx <<= 5; /* Tempcx[7]: VRS[8] */ - Tempdx |= Tempcx; /* Tempdx: VRS[8:1] */ - /* SR34[7:0]: VRS[8:1] */ - xgifb_reg_set(pVBInfo->P3c4, 0x34, Tempdx); - - /* Temp1[8]: VRS[8] unsigned char -> unsigned short */ - Temp1 = Tempcx << 1; - Temp1 |= Tempbx; /* Temp1[8:0]: VRS[8:0] */ - Tempax &= 0x80; /* Tempax[7]: CR7[7] */ - Temp2 = Tempax << 2; /* Temp2[9]: VRS[9] */ - Temp1 |= Temp2; /* Temp1[9:0]: VRS[9:0] */ - - /* CR16 VRE */ - Tempax = pVBInfo->StandTable[StandTableIndex].CRTC[17]; - Tempax &= 0x0F; /* Tempax[3:0]: VRE[3:0] */ - Temp2 = Temp1 & 0x3F0; /* Temp2[9:4]: VRS[9:4] */ - Temp2 |= Tempax; /* Temp2[9:0]: VRE[9:0] */ - Temp3 = Temp1 & 0x0F; /* Temp3[3:0]: VRS[3:0] */ - if (Tempax < Temp3) /* VRE[3:0]<VRS[3:0] */ - Temp2 |= 0x10; /* Temp2: VRE + 0x10 */ - Temp2 &= 0xFF; /* Temp2[7:0]: VRE[7:0] */ - Tempax = (unsigned char) Temp2; /* Tempax[7:0]: VRE[7:0] */ - Tempax <<= 2; /* Tempax << 2: VRE[5:0] */ - Temp1 &= 0x600; /* Temp1[10:9]: VRS[10:9] */ - Temp1 >>= 9; /* [10:9]->[1:0] */ - Tempbx = (unsigned char) Temp1; /* Tempbx[1:0]: VRS[10:9] */ - Tempax |= Tempbx; /* VRE[5:0]VRS[10:9] */ - Tempax &= 0x7F; - /* SR3F D[7:2]->VRE D[1:0]->VRS */ - xgifb_reg_set(pVBInfo->P3c4, 0x3F, Tempax); - } else { - index = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRT1CRTC; - /* Tempax: CR4 HRS */ - Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[3]; - Tempcx = Tempax; /* Tempcx: HRS */ - /* SR2E[7:0]->HRS */ - xgifb_reg_set(pVBInfo->P3c4, 0x2E, Tempax); - - Tempdx = pVBInfo->XGINEWUB_CRT1Table[index].CR[5]; /* SRB */ - Tempdx &= 0xC0; /* Tempdx[7:6]: SRB[7:6] */ - Temp1 = Tempdx; /* Temp1[7:6]: HRS[9:8] */ - Temp1 <<= 2; /* Temp1[9:8]: HRS[9:8] */ - Temp1 |= Tempax; /* Temp1[9:0]: HRS[9:0] */ - - Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[4]; /* CR5 HRE */ - Tempax &= 0x1F; /* Tempax[4:0]: HRE[4:0] */ - - Tempbx = pVBInfo->XGINEWUB_CRT1Table[index].CR[6]; /* SRC */ - Tempbx &= 0x04; /* Tempbx[2]: HRE[5] */ - Tempbx <<= 3; /* Tempbx[5]: HRE[5] */ - Tempax |= Tempbx; /* Tempax[5:0]: HRE[5:0] */ - - Temp2 = Temp1 & 0x3C0; /* Temp2[9:6]: HRS[9:6] */ - Temp2 |= Tempax; /* Temp2[9:0]: HRE[9:0] */ - - Tempcx &= 0x3F; /* Tempcx[5:0]: HRS[5:0] */ - if (Tempax < Tempcx) /* HRE < HRS */ - Temp2 |= 0x40; /* Temp2 + 0x40 */ - - Temp2 &= 0xFF; - Tempax = (unsigned char) Temp2; /* Tempax: HRE[7:0] */ - Tempax <<= 2; /* Tempax[7:2]: HRE[5:0] */ - Tempdx >>= 6; /* Tempdx[7:6]->[1:0] HRS[9:8] */ - Tempax |= Tempdx; /* HRE[5:0]HRS[9:8] */ - /* SR2F D[7:2]->HRE, D[1:0]->HRS */ - xgifb_reg_set(pVBInfo->P3c4, 0x2F, Tempax); - xgifb_reg_and_or(pVBInfo->P3c4, 0x30, 0xE3, 00); - - /* CR10 VRS */ - Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[10]; - Tempbx = Tempax; /* Tempbx: VRS */ - Tempax &= 0x01; /* Tempax[0]: VRS[0] */ - xgifb_reg_or(pVBInfo->P3c4, 0x33, Tempax); /* SR33[0]->VRS[0] */ - /* CR7[2][7] VRE */ - Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[9]; - Tempcx = Tempbx >> 1; /* Tempcx[6:0]: VRS[7:1] */ - Tempdx = Tempax & 0x04; /* Tempdx[2]: CR7[2] */ - Tempdx <<= 5; /* Tempdx[7]: VRS[8] */ - Tempcx |= Tempdx; /* Tempcx[7:0]: VRS[8:1] */ - xgifb_reg_set(pVBInfo->P3c4, 0x34, Tempcx); /* SR34[8:1]->VRS */ - - Temp1 = Tempdx; /* Temp1[7]: Tempdx[7] */ - Temp1 <<= 1; /* Temp1[8]: VRS[8] */ - Temp1 |= Tempbx; /* Temp1[8:0]: VRS[8:0] */ - Tempax &= 0x80; - Temp2 = Tempax << 2; /* Temp2[9]: VRS[9] */ - Temp1 |= Temp2; /* Temp1[9:0]: VRS[9:0] */ - /* Tempax: SRA */ - Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[14]; - Tempax &= 0x08; /* Tempax[3]: VRS[3] */ - Temp2 = Tempax; - Temp2 <<= 7; /* Temp2[10]: VRS[10] */ - Temp1 |= Temp2; /* Temp1[10:0]: VRS[10:0] */ - - /* Tempax: CR11 VRE */ - Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[11]; - Tempax &= 0x0F; /* Tempax[3:0]: VRE[3:0] */ - /* Tempbx: SRA */ - Tempbx = pVBInfo->XGINEWUB_CRT1Table[index].CR[14]; - Tempbx &= 0x20; /* Tempbx[5]: VRE[5] */ - Tempbx >>= 1; /* Tempbx[4]: VRE[4] */ - Tempax |= Tempbx; /* Tempax[4:0]: VRE[4:0] */ - Temp2 = Temp1 & 0x7E0; /* Temp2[10:5]: VRS[10:5] */ - Temp2 |= Tempax; /* Temp2[10:5]: VRE[10:5] */ - - Temp3 = Temp1 & 0x1F; /* Temp3[4:0]: VRS[4:0] */ - if (Tempax < Temp3) /* VRE < VRS */ - Temp2 |= 0x20; /* VRE + 0x20 */ - - Temp2 &= 0xFF; - Tempax = (unsigned char) Temp2; /* Tempax: VRE[7:0] */ - Tempax <<= 2; /* Tempax[7:0]; VRE[5:0]00 */ - Temp1 &= 0x600; /* Temp1[10:9]: VRS[10:9] */ - Temp1 >>= 9; /* Temp1[1:0]: VRS[10:9] */ - Tempbx = (unsigned char) Temp1; - Tempax |= Tempbx; /* Tempax[7:0]: VRE[5:0]VRS[10:9] */ - Tempax &= 0x7F; - /* SR3F D[7:2]->VRE D[1:0]->VRS */ - xgifb_reg_set(pVBInfo->P3c4, 0x3F, Tempax); - } + index = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRT1CRTC; + /* Tempax: CR4 HRS */ + Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[3]; + Tempcx = Tempax; /* Tempcx: HRS */ + /* SR2E[7:0]->HRS */ + xgifb_reg_set(pVBInfo->P3c4, 0x2E, Tempax); + + Tempdx = pVBInfo->XGINEWUB_CRT1Table[index].CR[5]; /* SRB */ + Tempdx &= 0xC0; /* Tempdx[7:6]: SRB[7:6] */ + Temp1 = Tempdx; /* Temp1[7:6]: HRS[9:8] */ + Temp1 <<= 2; /* Temp1[9:8]: HRS[9:8] */ + Temp1 |= Tempax; /* Temp1[9:0]: HRS[9:0] */ + + Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[4]; /* CR5 HRE */ + Tempax &= 0x1F; /* Tempax[4:0]: HRE[4:0] */ + + Tempbx = pVBInfo->XGINEWUB_CRT1Table[index].CR[6]; /* SRC */ + Tempbx &= 0x04; /* Tempbx[2]: HRE[5] */ + Tempbx <<= 3; /* Tempbx[5]: HRE[5] */ + Tempax |= Tempbx; /* Tempax[5:0]: HRE[5:0] */ + + Temp2 = Temp1 & 0x3C0; /* Temp2[9:6]: HRS[9:6] */ + Temp2 |= Tempax; /* Temp2[9:0]: HRE[9:0] */ + + Tempcx &= 0x3F; /* Tempcx[5:0]: HRS[5:0] */ + if (Tempax < Tempcx) /* HRE < HRS */ + Temp2 |= 0x40; /* Temp2 + 0x40 */ + + Temp2 &= 0xFF; + Tempax = (unsigned char) Temp2; /* Tempax: HRE[7:0] */ + Tempax <<= 2; /* Tempax[7:2]: HRE[5:0] */ + Tempdx >>= 6; /* Tempdx[7:6]->[1:0] HRS[9:8] */ + Tempax |= Tempdx; /* HRE[5:0]HRS[9:8] */ + /* SR2F D[7:2]->HRE, D[1:0]->HRS */ + xgifb_reg_set(pVBInfo->P3c4, 0x2F, Tempax); + xgifb_reg_and_or(pVBInfo->P3c4, 0x30, 0xE3, 00); + + /* CR10 VRS */ + Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[10]; + Tempbx = Tempax; /* Tempbx: VRS */ + Tempax &= 0x01; /* Tempax[0]: VRS[0] */ + xgifb_reg_or(pVBInfo->P3c4, 0x33, Tempax); /* SR33[0]->VRS[0] */ + /* CR7[2][7] VRE */ + Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[9]; + Tempcx = Tempbx >> 1; /* Tempcx[6:0]: VRS[7:1] */ + Tempdx = Tempax & 0x04; /* Tempdx[2]: CR7[2] */ + Tempdx <<= 5; /* Tempdx[7]: VRS[8] */ + Tempcx |= Tempdx; /* Tempcx[7:0]: VRS[8:1] */ + xgifb_reg_set(pVBInfo->P3c4, 0x34, Tempcx); /* SR34[8:1]->VRS */ + + Temp1 = Tempdx; /* Temp1[7]: Tempdx[7] */ + Temp1 <<= 1; /* Temp1[8]: VRS[8] */ + Temp1 |= Tempbx; /* Temp1[8:0]: VRS[8:0] */ + Tempax &= 0x80; + Temp2 = Tempax << 2; /* Temp2[9]: VRS[9] */ + Temp1 |= Temp2; /* Temp1[9:0]: VRS[9:0] */ + /* Tempax: SRA */ + Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[14]; + Tempax &= 0x08; /* Tempax[3]: VRS[3] */ + Temp2 = Tempax; + Temp2 <<= 7; /* Temp2[10]: VRS[10] */ + Temp1 |= Temp2; /* Temp1[10:0]: VRS[10:0] */ + + /* Tempax: CR11 VRE */ + Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[11]; + Tempax &= 0x0F; /* Tempax[3:0]: VRE[3:0] */ + /* Tempbx: SRA */ + Tempbx = pVBInfo->XGINEWUB_CRT1Table[index].CR[14]; + Tempbx &= 0x20; /* Tempbx[5]: VRE[5] */ + Tempbx >>= 1; /* Tempbx[4]: VRE[4] */ + Tempax |= Tempbx; /* Tempax[4:0]: VRE[4:0] */ + Temp2 = Temp1 & 0x7E0; /* Temp2[10:5]: VRS[10:5] */ + Temp2 |= Tempax; /* Temp2[10:5]: VRE[10:5] */ + + Temp3 = Temp1 & 0x1F; /* Temp3[4:0]: VRS[4:0] */ + if (Tempax < Temp3) /* VRE < VRS */ + Temp2 |= 0x20; /* VRE + 0x20 */ + + Temp2 &= 0xFF; + Tempax = (unsigned char) Temp2; /* Tempax: VRE[7:0] */ + Tempax <<= 2; /* Tempax[7:0]; VRE[5:0]00 */ + Temp1 &= 0x600; /* Temp1[10:9]: VRS[10:9] */ + Temp1 >>= 9; /* Temp1[1:0]: VRS[10:9] */ + Tempbx = (unsigned char) Temp1; + Tempax |= Tempbx; /* Tempax[7:0]: VRE[5:0]VRS[10:9] */ + Tempax &= 0x7F; + /* SR3F D[7:2]->VRE D[1:0]->VRS */ + xgifb_reg_set(pVBInfo->P3c4, 0x3F, Tempax); } static void XGI_SetXG27CRTC(unsigned short ModeNo, @@ -800,139 +672,88 @@ static void XGI_SetXG27CRTC(unsigned short ModeNo, unsigned short RefreshRateTableIndex, struct vb_device_info *pVBInfo) { - unsigned short StandTableIndex, index, Tempax, Tempbx, Tempcx, Tempdx; - - if (ModeNo <= 0x13) { - StandTableIndex = XGI_GetModePtr(ModeNo, ModeIdIndex, pVBInfo); - /* CR04 HRS */ - Tempax = pVBInfo->StandTable[StandTableIndex].CRTC[4]; - /* SR2E [7:0]->HRS */ - xgifb_reg_set(pVBInfo->P3c4, 0x2E, Tempax); - /* Tempbx: CR05 HRE */ - Tempbx = pVBInfo->StandTable[StandTableIndex].CRTC[5]; - Tempbx &= 0x1F; /* Tempbx: HRE[4:0] */ - Tempcx = Tempax; - Tempcx &= 0xE0; /* Tempcx: HRS[7:5] */ - Tempdx = Tempcx | Tempbx; /* Tempdx(HRE): HRS[7:5]HRE[4:0] */ - if (Tempbx < (Tempax & 0x1F)) /* IF HRE < HRS */ - Tempdx |= 0x20; /* Tempdx: HRE = HRE + 0x20 */ - Tempdx <<= 2; /* Tempdx << 2 */ - /* SR2F [7:2]->HRE */ - xgifb_reg_set(pVBInfo->P3c4, 0x2F, Tempdx); - xgifb_reg_and_or(pVBInfo->P3c4, 0x30, 0xE3, 00); - - /* Tempax: CR10 VRS */ - Tempax = pVBInfo->StandTable[StandTableIndex].CRTC[16]; - xgifb_reg_set(pVBInfo->P3c4, 0x34, Tempax); /* SR34[7:0]->VRS */ - Tempcx = Tempax; /* Tempcx=Tempax=VRS[7:0] */ - /* Tempax[7][2]: CR7[7][2] VRS[9][8] */ - Tempax = pVBInfo->StandTable[StandTableIndex].CRTC[7]; - Tempbx = Tempax; /* Tempbx=CR07 */ - Tempax &= 0x04; /* Tempax[2]: CR07[2] VRS[8] */ - Tempax >>= 2; - /* SR35 D[0]->VRS D[8] */ - xgifb_reg_and_or(pVBInfo->P3c4, 0x35, ~0x01, Tempax); - Tempcx |= (Tempax << 8); /* Tempcx[8] |= VRS[8] */ - Tempcx |= (Tempbx & 0x80) << 2; /* Tempcx[9] |= VRS[9] */ - - /* CR11 VRE */ - Tempax = pVBInfo->StandTable[StandTableIndex].CRTC[17]; - Tempax &= 0x0F; /* Tempax: VRE[3:0] */ - Tempbx = Tempcx; /* Tempbx=Tempcx=VRS[9:0] */ - Tempbx &= 0x3F0; /* Tempbx[9:4]: VRS[9:4] */ - Tempbx |= Tempax; /* Tempbx[9:0]: VRE[9:0] */ - if (Tempax <= (Tempcx & 0x0F)) /* VRE[3:0]<=VRS[3:0] */ - Tempbx |= 0x10; /* Tempbx: VRE + 0x10 */ - /* Tempax[7:0]: VRE[7:0] */ - Tempax = (unsigned char) Tempbx & 0xFF; - Tempax <<= 2; /* Tempax << 2: VRE[5:0] */ - Tempcx = (Tempcx & 0x600) >> 8; /* Tempcx VRS[10:9] */ - /* SR3F D[7:2]->VRE D[5:0] */ - xgifb_reg_and_or(pVBInfo->P3c4, 0x3F, ~0xFC, Tempax); - /* SR35 D[2:1]->VRS[10:9] */ - xgifb_reg_and_or(pVBInfo->P3c4, 0x35, ~0x06, Tempcx); - } else { - index = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRT1CRTC; - /* Tempax: CR4 HRS */ - Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[3]; - Tempbx = Tempax; /* Tempbx: HRS[7:0] */ - /* SR2E[7:0]->HRS */ - xgifb_reg_set(pVBInfo->P3c4, 0x2E, Tempax); - - /* SR0B */ - Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[5]; - Tempax &= 0xC0; /* Tempax[7:6]: SR0B[7:6]: HRS[9:8]*/ - Tempbx |= (Tempax << 2); /* Tempbx: HRS[9:0] */ - - Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[4]; /* CR5 HRE */ - Tempax &= 0x1F; /* Tempax[4:0]: HRE[4:0] */ - Tempcx = Tempax; /* Tempcx: HRE[4:0] */ - - Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[6]; /* SRC */ - Tempax &= 0x04; /* Tempax[2]: HRE[5] */ - Tempax <<= 3; /* Tempax[5]: HRE[5] */ - Tempcx |= Tempax; /* Tempcx[5:0]: HRE[5:0] */ - - Tempbx = Tempbx & 0x3C0; /* Tempbx[9:6]: HRS[9:6] */ - Tempbx |= Tempcx; /* Tempbx: HRS[9:6]HRE[5:0] */ - - /* Tempax: CR4 HRS */ - Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[3]; - Tempax &= 0x3F; /* Tempax: HRS[5:0] */ - if (Tempcx <= Tempax) /* HRE[5:0] < HRS[5:0] */ - Tempbx += 0x40; /* Tempbx= Tempbx + 0x40 : HRE[9:0]*/ - - Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[5]; /* SR0B */ - Tempax &= 0xC0; /* Tempax[7:6]: SR0B[7:6]: HRS[9:8]*/ - Tempax >>= 6; /* Tempax[1:0]: HRS[9:8]*/ - Tempax |= ((Tempbx << 2) & 0xFF); /* Tempax[7:2]: HRE[5:0] */ - /* SR2F [7:2][1:0]: HRE[5:0]HRS[9:8] */ - xgifb_reg_set(pVBInfo->P3c4, 0x2F, Tempax); - xgifb_reg_and_or(pVBInfo->P3c4, 0x30, 0xE3, 00); - - /* CR10 VRS */ - Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[10]; - /* SR34[7:0]->VRS[7:0] */ - xgifb_reg_set(pVBInfo->P3c4, 0x34, Tempax); - - Tempcx = Tempax; /* Tempcx <= VRS[7:0] */ - /* CR7[7][2] VRS[9][8] */ - Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[9]; - Tempbx = Tempax; /* Tempbx <= CR07[7:0] */ - Tempax = Tempax & 0x04; /* Tempax[2]: CR7[2]: VRS[8] */ - Tempax >>= 2; /* Tempax[0]: VRS[8] */ - /* SR35[0]: VRS[8] */ - xgifb_reg_and_or(pVBInfo->P3c4, 0x35, ~0x01, Tempax); - Tempcx |= (Tempax << 8); /* Tempcx <= VRS[8:0] */ - Tempcx |= ((Tempbx & 0x80) << 2); /* Tempcx <= VRS[9:0] */ - /* Tempax: SR0A */ - Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[14]; - Tempax &= 0x08; /* SR0A[3] VRS[10] */ - Tempcx |= (Tempax << 7); /* Tempcx <= VRS[10:0] */ - - /* Tempax: CR11 VRE */ - Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[11]; - Tempax &= 0x0F; /* Tempax[3:0]: VRE[3:0] */ - /* Tempbx: SR0A */ - Tempbx = pVBInfo->XGINEWUB_CRT1Table[index].CR[14]; - Tempbx &= 0x20; /* Tempbx[5]: SR0A[5]: VRE[4] */ - Tempbx >>= 1; /* Tempbx[4]: VRE[4] */ - Tempax |= Tempbx; /* Tempax[4:0]: VRE[4:0] */ - Tempbx = Tempcx; /* Tempbx: VRS[10:0] */ - Tempbx &= 0x7E0; /* Tempbx[10:5]: VRS[10:5] */ - Tempbx |= Tempax; /* Tempbx: VRS[10:5]VRE[4:0] */ - - if (Tempbx <= Tempcx) /* VRE <= VRS */ - Tempbx |= 0x20; /* VRE + 0x20 */ - - /* Tempax: Tempax[7:0]; VRE[5:0]00 */ - Tempax = (Tempbx << 2) & 0xFF; - /* SR3F[7:2]:VRE[5:0] */ - xgifb_reg_and_or(pVBInfo->P3c4, 0x3F, ~0xFC, Tempax); - Tempax = Tempcx >> 8; - /* SR35[2:0]:VRS[10:8] */ - xgifb_reg_and_or(pVBInfo->P3c4, 0x35, ~0x07, Tempax); - } + unsigned short index, Tempax, Tempbx, Tempcx; + + index = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRT1CRTC; + /* Tempax: CR4 HRS */ + Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[3]; + Tempbx = Tempax; /* Tempbx: HRS[7:0] */ + /* SR2E[7:0]->HRS */ + xgifb_reg_set(pVBInfo->P3c4, 0x2E, Tempax); + + /* SR0B */ + Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[5]; + Tempax &= 0xC0; /* Tempax[7:6]: SR0B[7:6]: HRS[9:8]*/ + Tempbx |= (Tempax << 2); /* Tempbx: HRS[9:0] */ + + Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[4]; /* CR5 HRE */ + Tempax &= 0x1F; /* Tempax[4:0]: HRE[4:0] */ + Tempcx = Tempax; /* Tempcx: HRE[4:0] */ + + Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[6]; /* SRC */ + Tempax &= 0x04; /* Tempax[2]: HRE[5] */ + Tempax <<= 3; /* Tempax[5]: HRE[5] */ + Tempcx |= Tempax; /* Tempcx[5:0]: HRE[5:0] */ + + Tempbx = Tempbx & 0x3C0; /* Tempbx[9:6]: HRS[9:6] */ + Tempbx |= Tempcx; /* Tempbx: HRS[9:6]HRE[5:0] */ + + /* Tempax: CR4 HRS */ + Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[3]; + Tempax &= 0x3F; /* Tempax: HRS[5:0] */ + if (Tempcx <= Tempax) /* HRE[5:0] < HRS[5:0] */ + Tempbx += 0x40; /* Tempbx= Tempbx + 0x40 : HRE[9:0]*/ + + Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[5]; /* SR0B */ + Tempax &= 0xC0; /* Tempax[7:6]: SR0B[7:6]: HRS[9:8]*/ + Tempax >>= 6; /* Tempax[1:0]: HRS[9:8]*/ + Tempax |= ((Tempbx << 2) & 0xFF); /* Tempax[7:2]: HRE[5:0] */ + /* SR2F [7:2][1:0]: HRE[5:0]HRS[9:8] */ + xgifb_reg_set(pVBInfo->P3c4, 0x2F, Tempax); + xgifb_reg_and_or(pVBInfo->P3c4, 0x30, 0xE3, 00); + + /* CR10 VRS */ + Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[10]; + /* SR34[7:0]->VRS[7:0] */ + xgifb_reg_set(pVBInfo->P3c4, 0x34, Tempax); + + Tempcx = Tempax; /* Tempcx <= VRS[7:0] */ + /* CR7[7][2] VRS[9][8] */ + Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[9]; + Tempbx = Tempax; /* Tempbx <= CR07[7:0] */ + Tempax = Tempax & 0x04; /* Tempax[2]: CR7[2]: VRS[8] */ + Tempax >>= 2; /* Tempax[0]: VRS[8] */ + /* SR35[0]: VRS[8] */ + xgifb_reg_and_or(pVBInfo->P3c4, 0x35, ~0x01, Tempax); + Tempcx |= (Tempax << 8); /* Tempcx <= VRS[8:0] */ + Tempcx |= ((Tempbx & 0x80) << 2); /* Tempcx <= VRS[9:0] */ + /* Tempax: SR0A */ + Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[14]; + Tempax &= 0x08; /* SR0A[3] VRS[10] */ + Tempcx |= (Tempax << 7); /* Tempcx <= VRS[10:0] */ + + /* Tempax: CR11 VRE */ + Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[11]; + Tempax &= 0x0F; /* Tempax[3:0]: VRE[3:0] */ + /* Tempbx: SR0A */ + Tempbx = pVBInfo->XGINEWUB_CRT1Table[index].CR[14]; + Tempbx &= 0x20; /* Tempbx[5]: SR0A[5]: VRE[4] */ + Tempbx >>= 1; /* Tempbx[4]: VRE[4] */ + Tempax |= Tempbx; /* Tempax[4:0]: VRE[4:0] */ + Tempbx = Tempcx; /* Tempbx: VRS[10:0] */ + Tempbx &= 0x7E0; /* Tempbx[10:5]: VRS[10:5] */ + Tempbx |= Tempax; /* Tempbx: VRS[10:5]VRE[4:0] */ + + if (Tempbx <= Tempcx) /* VRE <= VRS */ + Tempbx |= 0x20; /* VRE + 0x20 */ + + /* Tempax: Tempax[7:0]; VRE[5:0]00 */ + Tempax = (Tempbx << 2) & 0xFF; + /* SR3F[7:2]:VRE[5:0] */ + xgifb_reg_and_or(pVBInfo->P3c4, 0x3F, ~0xFC, Tempax); + Tempax = Tempcx >> 8; + /* SR35[2:0]:VRS[10:8] */ + xgifb_reg_and_or(pVBInfo->P3c4, 0x35, ~0x07, Tempax); } static void XGI_SetXG27FPBits(struct vb_device_info *pVBInfo) @@ -954,7 +775,7 @@ static void xgifb_set_lcd(int chip_id, unsigned short RefreshRateTableIndex, unsigned short ModeNo) { - unsigned short Data, Temp, b3CC; + unsigned short Data, Temp; unsigned short XGI_P3cc; XGI_P3cc = pVBInfo->P3cc; @@ -995,23 +816,13 @@ static void xgifb_set_lcd(int chip_id, xgifb_reg_and(pVBInfo->P3c4, 0x30, ~0x20); /* Hsync polarity */ xgifb_reg_and(pVBInfo->P3c4, 0x35, ~0x80); /* Vsync polarity */ - if (ModeNo <= 0x13) { - b3CC = (unsigned char) inb(XGI_P3cc); - if (b3CC & 0x40) - /* Hsync polarity */ - xgifb_reg_or(pVBInfo->P3c4, 0x30, 0x20); - if (b3CC & 0x80) - /* Vsync polarity */ - xgifb_reg_or(pVBInfo->P3c4, 0x35, 0x80); - } else { - Data = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_InfoFlag; - if (Data & 0x4000) - /* Hsync polarity */ - xgifb_reg_or(pVBInfo->P3c4, 0x30, 0x20); - if (Data & 0x8000) - /* Vsync polarity */ - xgifb_reg_or(pVBInfo->P3c4, 0x35, 0x80); - } + Data = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_InfoFlag; + if (Data & 0x4000) + /* Hsync polarity */ + xgifb_reg_or(pVBInfo->P3c4, 0x30, 0x20); + if (Data & 0x8000) + /* Vsync polarity */ + xgifb_reg_or(pVBInfo->P3c4, 0x35, 0x80); } /* --------------------------------------------------------------------- */ @@ -1024,30 +835,22 @@ static void XGI_UpdateXG21CRTC(unsigned short ModeNo, struct vb_device_info *pVBInfo, unsigned short RefreshRateTableIndex) { - int i, index = -1; + int index = -1; xgifb_reg_and(pVBInfo->P3d4, 0x11, 0x7F); /* Unlock CR0~7 */ - if (ModeNo <= 0x13) { - for (i = 0; i < 12; i++) { - if (ModeNo == pVBInfo->UpdateCRT1[i].ModeID) - index = i; - } - } else { - if (ModeNo == 0x2E && - (pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRT1CRTC == - RES640x480x60)) - index = 12; - else if (ModeNo == 0x2E && - (pVBInfo->RefIndex[RefreshRateTableIndex]. + if (ModeNo == 0x2E && + (pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRT1CRTC == + RES640x480x60)) + index = 12; + else if (ModeNo == 0x2E && (pVBInfo->RefIndex[RefreshRateTableIndex]. Ext_CRT1CRTC == RES640x480x72)) - index = 13; - else if (ModeNo == 0x2F) - index = 14; - else if (ModeNo == 0x50) - index = 15; - else if (ModeNo == 0x59) - index = 16; - } + index = 13; + else if (ModeNo == 0x2F) + index = 14; + else if (ModeNo == 0x50) + index = 15; + else if (ModeNo == 0x59) + index = 16; if (index != -1) { xgifb_reg_set(pVBInfo->P3d4, 0x02, @@ -1061,20 +864,6 @@ static void XGI_UpdateXG21CRTC(unsigned short ModeNo, } } -static unsigned short XGI_GetResInfo(unsigned short ModeNo, - unsigned short ModeIdIndex, struct vb_device_info *pVBInfo) -{ - unsigned short resindex; - - if (ModeNo <= 0x13) - /* si+St_ResInfo */ - resindex = pVBInfo->SModeIDTable[ModeIdIndex].St_ResInfo; - else - /* si+Ext_ResInfo */ - resindex = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO; - return resindex; -} - static void XGI_SetCRT1DE(struct xgi_hw_device_info *HwDeviceExtension, unsigned short ModeNo, unsigned short ModeIdIndex, unsigned short RefreshRateTableIndex, @@ -1084,33 +873,25 @@ static void XGI_SetCRT1DE(struct xgi_hw_device_info *HwDeviceExtension, unsigned char data; - resindex = XGI_GetResInfo(ModeNo, ModeIdIndex, pVBInfo); + resindex = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO; - if (ModeNo <= 0x13) { - modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag; - tempax = pVBInfo->StResInfo[resindex].HTotal; - tempbx = pVBInfo->StResInfo[resindex].VTotal; - } else { - modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag; - tempax = pVBInfo->ModeResInfo[resindex].HTotal; - tempbx = pVBInfo->ModeResInfo[resindex].VTotal; - } + modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag; + tempax = pVBInfo->ModeResInfo[resindex].HTotal; + tempbx = pVBInfo->ModeResInfo[resindex].VTotal; if (modeflag & HalfDCLK) tempax = tempax >> 1; - if (ModeNo > 0x13) { - if (modeflag & HalfDCLK) - tempax = tempax << 1; + if (modeflag & HalfDCLK) + tempax = tempax << 1; - temp = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_InfoFlag; + temp = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_InfoFlag; - if (temp & InterlaceMode) - tempbx = tempbx >> 1; + if (temp & InterlaceMode) + tempbx = tempbx >> 1; - if (modeflag & DoubleScanMode) - tempbx = tempbx << 1; - } + if (modeflag & DoubleScanMode) + tempbx = tempbx << 1; tempcx = 8; @@ -1258,18 +1039,10 @@ static unsigned short XGI_GetVCLK2Ptr(unsigned short ModeNo, unsigned short CRT2Index, VCLKIndex; unsigned short modeflag, resinfo; - if (ModeNo <= 0x13) { - /* si+St_ResInfo */ - modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag; - resinfo = pVBInfo->SModeIDTable[ModeIdIndex].St_ResInfo; - CRT2Index = pVBInfo->SModeIDTable[ModeIdIndex].St_CRT2CRTC; - } else { - /* si+Ext_ResInfo */ - modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag; - resinfo = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO; - CRT2Index = pVBInfo->RefIndex[RefreshRateTableIndex]. - Ext_CRT2CRTC; - } + /* si+Ext_ResInfo */ + modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag; + resinfo = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO; + CRT2Index = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRT2CRTC; if (pVBInfo->IF_DEF_LVDS == 0) { CRT2Index = CRT2Index >> 6; /* for LCD */ @@ -1318,23 +1091,13 @@ static unsigned short XGI_GetVCLK2Ptr(unsigned short ModeNo, VCLKIndex += 25; } } else { /* for CRT2 */ - /* Port 3cch */ - VCLKIndex = (unsigned char) inb((pVBInfo->P3ca + 0x02)); - VCLKIndex = ((VCLKIndex >> 2) & 0x03); - if (ModeNo > 0x13) { - /* di+Ext_CRTVCLK */ - VCLKIndex = pVBInfo->RefIndex[ - RefreshRateTableIndex]. + /* di+Ext_CRTVCLK */ + VCLKIndex = pVBInfo->RefIndex[RefreshRateTableIndex]. Ext_CRTVCLK; - VCLKIndex &= IndexMask; - } + VCLKIndex &= IndexMask; } } else { /* LVDS */ - if (ModeNo <= 0x13) - VCLKIndex = CRT2Index; - else - VCLKIndex = CRT2Index; - + VCLKIndex = CRT2Index; VCLKIndex = VCLKIndex >> 6; if ((pVBInfo->LCDResInfo == Panel_800x600) || (pVBInfo->LCDResInfo == Panel_320x480)) @@ -1431,27 +1194,13 @@ static void XGI_SetCRT1FIFO(unsigned short ModeNo, data &= 0xfe; xgifb_reg_set(pVBInfo->P3c4, 0x3D, data); /* diable auto-threshold */ - if (ModeNo > 0x13) { - xgifb_reg_set(pVBInfo->P3c4, 0x08, 0x34); - data = xgifb_reg_get(pVBInfo->P3c4, 0x09); - data &= 0xC0; - xgifb_reg_set(pVBInfo->P3c4, 0x09, data | 0x30); - data = xgifb_reg_get(pVBInfo->P3c4, 0x3D); - data |= 0x01; - xgifb_reg_set(pVBInfo->P3c4, 0x3D, data); - } else { - if (HwDeviceExtension->jChipType == XG27) { - xgifb_reg_set(pVBInfo->P3c4, 0x08, 0x0E); - data = xgifb_reg_get(pVBInfo->P3c4, 0x09); - data &= 0xC0; - xgifb_reg_set(pVBInfo->P3c4, 0x09, data | 0x20); - } else { - xgifb_reg_set(pVBInfo->P3c4, 0x08, 0xAE); - data = xgifb_reg_get(pVBInfo->P3c4, 0x09); - data &= 0xF0; - xgifb_reg_set(pVBInfo->P3c4, 0x09, data); - } - } + xgifb_reg_set(pVBInfo->P3c4, 0x08, 0x34); + data = xgifb_reg_get(pVBInfo->P3c4, 0x09); + data &= 0xC0; + xgifb_reg_set(pVBInfo->P3c4, 0x09, data | 0x30); + data = xgifb_reg_get(pVBInfo->P3c4, 0x3D); + data |= 0x01; + xgifb_reg_set(pVBInfo->P3c4, 0x3D, data); if (HwDeviceExtension->jChipType == XG21) XGI_SetXG21FPBits(pVBInfo); /* Fix SR9[7:6] can't read back */ @@ -1466,13 +1215,9 @@ static void XGI_SetVCLKState(struct xgi_hw_device_info *HwDeviceExtension, unsigned char index; - if (ModeNo <= 0x13) - VCLK = 0; - else { - index = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRTVCLK; - index &= IndexMask; - VCLK = pVBInfo->VCLKData[index].CLOCK; - } + index = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRTVCLK; + index &= IndexMask; + VCLK = pVBInfo->VCLKData[index].CLOCK; data = xgifb_reg_get(pVBInfo->P3c4, 0x32); data &= 0xf3; @@ -1508,44 +1253,26 @@ static void XGI_SetCRT1ModeRegs(struct xgi_hw_device_info *HwDeviceExtension, unsigned short data, data2, data3, infoflag = 0, modeflag, resindex, xres; - if (ModeNo > 0x13) { - modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag; - infoflag = pVBInfo->RefIndex[RefreshRateTableIndex]. - Ext_InfoFlag; - } else - /* si+St_ModeFlag */ - modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag; + modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag; + infoflag = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_InfoFlag; if (xgifb_reg_get(pVBInfo->P3d4, 0x31) & 0x01) xgifb_reg_and_or(pVBInfo->P3c4, 0x1F, 0x3F, 0x00); - if (ModeNo > 0x13) - data = infoflag; - else - data = 0; - + data = infoflag; data2 = 0; - - if (ModeNo > 0x13) { - if (pVBInfo->ModeType > 0x02) { - data2 |= 0x02; - data3 = pVBInfo->ModeType - ModeVGA; - data3 = data3 << 2; - data2 |= data3; - } - } - + data2 |= 0x02; + data3 = pVBInfo->ModeType - ModeVGA; + data3 = data3 << 2; + data2 |= data3; data &= InterlaceMode; if (data) data2 |= 0x20; xgifb_reg_and_or(pVBInfo->P3c4, 0x06, ~0x3F, data2); - resindex = XGI_GetResInfo(ModeNo, ModeIdIndex, pVBInfo); - if (ModeNo <= 0x13) - xres = pVBInfo->StResInfo[resindex].HTotal; - else - xres = pVBInfo->ModeResInfo[resindex].HTotal; /* xres->ax */ + resindex = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO; + xres = pVBInfo->ModeResInfo[resindex].HTotal; /* xres->ax */ data = 0x0000; if (infoflag & InterlaceMode) { @@ -1568,18 +1295,10 @@ static void XGI_SetCRT1ModeRegs(struct xgi_hw_device_info *HwDeviceExtension, if (modeflag & LineCompareOff) data2 |= 0x08; - if (ModeNo > 0x13) { - if (pVBInfo->ModeType == ModeEGA) - data2 |= 0x40; - } - xgifb_reg_and_or(pVBInfo->P3c4, 0x0F, ~0x48, data2); data = 0x60; - if (pVBInfo->ModeType != ModeText) { - data = data ^ 0x60; - if (pVBInfo->ModeType != ModeEGA) - data = data ^ 0xA0; - } + data = data ^ 0x60; + data = data ^ 0xA0; xgifb_reg_and_or(pVBInfo->P3c4, 0x21, 0x1F, data); XGI_SetVCLKState(HwDeviceExtension, ModeNo, RefreshRateTableIndex, @@ -1644,38 +1363,13 @@ static void XGI_WriteDAC(unsigned short dl, static void XGI_LoadDAC(unsigned short ModeNo, unsigned short ModeIdIndex, struct vb_device_info *pVBInfo) { - unsigned short data, data2, time, i, j, k, m, n, o, si, di, bx, dl, al, - ah, dh; - const unsigned short *table = NULL; - - if (ModeNo <= 0x13) - data = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag; - else - data = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag; - - data &= DACInfoFlag; - time = 64; - - if (data == 0x00) - table = XGINew_MDA_DAC; - else if (data == 0x08) - table = XGINew_CGA_DAC; - else if (data == 0x10) - table = XGINew_EGA_DAC; - else if (data == 0x18) { - time = 256; - table = XGINew_VGA_DAC; - } - - if (time == 256) - j = 16; - else - j = time; + unsigned short data, data2, i, k, m, n, o, si, di, bx, dl, al, ah, dh; + const unsigned short *table = XGINew_VGA_DAC; outb(0xFF, pVBInfo->P3c6); outb(0x00, pVBInfo->P3c8); - for (i = 0; i < j; i++) { + for (i = 0; i < 16; i++) { data = table[i]; for (k = 0; k < 3; k++) { @@ -1692,45 +1386,43 @@ static void XGI_LoadDAC(unsigned short ModeNo, unsigned short ModeIdIndex, } } - if (time == 256) { - for (i = 16; i < 32; i++) { - data = table[i]; - - for (k = 0; k < 3; k++) - outb(data, pVBInfo->P3c9); - } + for (i = 16; i < 32; i++) { + data = table[i]; - si = 32; + for (k = 0; k < 3; k++) + outb(data, pVBInfo->P3c9); + } - for (m = 0; m < 9; m++) { - di = si; - bx = si + 0x04; - dl = 0; + si = 32; - for (n = 0; n < 3; n++) { - for (o = 0; o < 5; o++) { - dh = table[si]; - ah = table[di]; - al = table[bx]; - si++; - XGI_WriteDAC(dl, ah, al, dh, pVBInfo); - } + for (m = 0; m < 9; m++) { + di = si; + bx = si + 0x04; + dl = 0; - si -= 2; + for (n = 0; n < 3; n++) { + for (o = 0; o < 5; o++) { + dh = table[si]; + ah = table[di]; + al = table[bx]; + si++; + XGI_WriteDAC(dl, ah, al, dh, pVBInfo); + } - for (o = 0; o < 3; o++) { - dh = table[bx]; - ah = table[di]; - al = table[si]; - si--; - XGI_WriteDAC(dl, ah, al, dh, pVBInfo); - } + si -= 2; - dl++; + for (o = 0; o < 3; o++) { + dh = table[bx]; + ah = table[di]; + al = table[si]; + si--; + XGI_WriteDAC(dl, ah, al, dh, pVBInfo); } - si += 5; + dl++; } + + si += 5; } } @@ -1740,34 +1432,20 @@ static void XGI_GetLVDSResInfo(unsigned short ModeNo, { unsigned short resindex, xres, yres, modeflag; - if (ModeNo <= 0x13) - /* si+St_ResInfo */ - modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ResInfo; - else - /* si+Ext_ResInfo */ - modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO; + /* si+Ext_ResInfo */ + modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO; - if (ModeNo <= 0x13) - /* si+St_ResInfo */ - resindex = pVBInfo->SModeIDTable[ModeIdIndex].St_ResInfo; - else - /* si+Ext_ResInfo */ - resindex = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO; + /* si+Ext_ResInfo */ + resindex = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO; - if (ModeNo <= 0x13) { - xres = pVBInfo->StResInfo[resindex].HTotal; - yres = pVBInfo->StResInfo[resindex].VTotal; - } else { - xres = pVBInfo->ModeResInfo[resindex].HTotal; - yres = pVBInfo->ModeResInfo[resindex].VTotal; - } - if (ModeNo > 0x13) { - if (modeflag & HalfDCLK) - xres = xres << 1; + xres = pVBInfo->ModeResInfo[resindex].HTotal; + yres = pVBInfo->ModeResInfo[resindex].VTotal; - if (modeflag & DoubleScanMode) - yres = yres << 1; - } + if (modeflag & HalfDCLK) + xres = xres << 1; + + if (modeflag & DoubleScanMode) + yres = yres << 1; if (xres == 720) xres = 640; @@ -1789,32 +1467,16 @@ static void *XGI_GetLcdPtr(unsigned short BX, unsigned short ModeNo, tempbx = BX; - if (ModeNo <= 0x13) { - modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag; - tempal = pVBInfo->SModeIDTable[ModeIdIndex].St_CRT2CRTC; - } else { - modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag; - tempal = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRT2CRTC; - } + modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag; + tempal = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRT2CRTC; tempal = tempal & 0x0f; if (tempbx <= 1) { /* ExpLink */ - if (ModeNo <= 0x13) { - /* find no Ext_CRT2CRTC2 */ - tempal = pVBInfo->SModeIDTable[ModeIdIndex].St_CRT2CRTC; - } else { - tempal = pVBInfo->RefIndex[RefreshRateTableIndex]. - Ext_CRT2CRTC; - } + tempal = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRT2CRTC; if (pVBInfo->VBInfo & XGI_SetCRT2ToLCDA) { - if (ModeNo <= 0x13) - tempal = pVBInfo->SModeIDTable[ModeIdIndex]. - St_CRT2CRTC2; - else - tempal = pVBInfo->RefIndex[ - RefreshRateTableIndex]. + tempal = pVBInfo->RefIndex[RefreshRateTableIndex]. Ext_CRT2CRTC2; } @@ -1882,9 +1544,6 @@ static void *XGI_GetLcdPtr(unsigned short BX, unsigned short ModeNo, tempbx = tempdi[i].MASK; tempdx = pVBInfo->LCDInfo; - if (ModeNo <= 0x13) /* alan 09/10/2003 */ - tempdx |= SetLCDStdMode; - if (modeflag & HalfDCLK) tempdx |= SetLCDLowResolution; @@ -2238,15 +1897,8 @@ static void *XGI_GetTVPtr(unsigned short BX, unsigned short ModeNo, struct XGI330_TVDataTablStruct *tempdi = NULL; tempbx = BX; - - if (ModeNo <= 0x13) { - modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag; - tempal = pVBInfo->SModeIDTable[ModeIdIndex].St_CRT2CRTC; - } else { - modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag; - tempal = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRT2CRTC; - } - + modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag; + tempal = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRT2CRTC; tempal = tempal & 0x3f; table = tempbx; @@ -2413,11 +2065,7 @@ static void XGI_ModCRT1Regs(unsigned short ModeNo, unsigned short ModeIdIndex, struct XGI_LVDSCRT1HDataStruct *LCDPtr = NULL; struct XGI_LVDSCRT1VDataStruct *LCDPtr1 = NULL; - if (ModeNo <= 0x13) - index = pVBInfo->SModeIDTable[ModeIdIndex].St_CRT2CRTC; - else - index = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRT2CRTC; - + index = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRT2CRTC; index = index & IndexMask; tempbx = 0; @@ -2530,14 +2178,10 @@ static void XGI_SetLVDSRegs(unsigned short ModeNo, unsigned short ModeIdIndex, { unsigned short tempbx, tempax, tempcx, tempdx, push1, push2, modeflag; unsigned long temp, temp1, temp2, temp3, push3; - struct XGI330_LCDDataDesStruct *LCDPtr = NULL; + struct XGI_LCDDesStruct *LCDPtr = NULL; struct XGI330_LCDDataDesStruct2 *LCDPtr1 = NULL; - if (ModeNo > 0x13) - modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag; - else - modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag; - + modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag; tempbx = 3; if (pVBInfo->LCDInfo & EnableScalingLCD) LCDPtr1 = @@ -2550,7 +2194,7 @@ static void XGI_SetLVDSRegs(unsigned short ModeNo, unsigned short ModeIdIndex, pVBInfo); else LCDPtr = - (struct XGI330_LCDDataDesStruct *) + (struct XGI_LCDDesStruct *) XGI_GetLcdPtr( tempbx, ModeNo, @@ -2829,12 +2473,8 @@ static unsigned char XGI_GetVCLKPtr(unsigned short RefreshRateTableIndex, unsigned short index, modeflag; unsigned char tempal; - if (ModeNo <= 0x13) - /* si+St_ResInfo */ - modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag; - else - /* si+Ext_ResInfo */ - modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag; + /* si+Ext_ResInfo */ + modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag; if ((pVBInfo->SetFlag & ProgrammingCRT2) && (!(pVBInfo->LCDInfo & EnableScalingLCD))) { /* {LCDA/LCDB} */ @@ -2895,9 +2535,6 @@ static unsigned char XGI_GetVCLKPtr(unsigned short RefreshRateTableIndex, if ((pVBInfo->LCDInfo & EnableScalingLCD) && (modeflag & Charx8Dot)) tempal = tempal ^ tempal; /* ; set to VCLK25MHz always */ - if (ModeNo <= 0x13) - return tempal; - tempal = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRTVCLK; return tempal; } @@ -3079,11 +2716,7 @@ static void XGI_GetVBInfo(unsigned short ModeNo, unsigned short ModeIdIndex, { unsigned short tempax, push, tempbx, temp, modeflag; - if (ModeNo <= 0x13) - modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag; - else - modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag; - + modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag; pVBInfo->SetFlag = 0; pVBInfo->ModeType = modeflag & ModeTypeMask; tempbx = 0; @@ -3283,17 +2916,8 @@ static void XGI_GetTVInfo(unsigned short ModeNo, unsigned short ModeIdIndex, resinfo = 0; if (pVBInfo->VBInfo & SetCRT2ToTV) { - if (ModeNo <= 0x13) { - modeflag = pVBInfo->SModeIDTable[ModeIdIndex]. - St_ModeFlag; /* si+St_ModeFlag */ - resinfo = pVBInfo->SModeIDTable[ModeIdIndex]. - St_ResInfo; /* si+St_ResInfo */ - } else { - modeflag = pVBInfo->EModeIDTable[ModeIdIndex]. - Ext_ModeFlag; - resinfo = pVBInfo->EModeIDTable[ModeIdIndex]. - Ext_RESINFO; /* si+Ext_ResInfo */ - } + modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag; + resinfo = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO; if (pVBInfo->VBInfo & SetCRT2ToTV) { temp = xgifb_reg_get(pVBInfo->P3d4, 0x35); @@ -3380,15 +3004,9 @@ static unsigned char XGI_GetLCDInfo(unsigned short ModeNo, pVBInfo->LCDTypeInfo = 0; pVBInfo->LCDInfo = 0; - if (ModeNo <= 0x13) { - /* si+St_ModeFlag // */ - modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag; - } else { - modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag; - /* si+Ext_ResInfo // */ - resinfo = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO; - } - + modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag; + /* si+Ext_ResInfo // */ + resinfo = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO; temp = xgifb_reg_get(pVBInfo->P3d4, 0x36); /* Get LCD Res.Info */ tempbx = temp & 0x0F; @@ -3442,8 +3060,8 @@ static unsigned char XGI_GetLCDInfo(unsigned short ModeNo, if (pVBInfo->IF_DEF_LVDS == 0) { if ((pVBInfo->LCDResInfo == Panel_1400x1050) && (pVBInfo->VBInfo - & SetCRT2ToLCD) && (ModeNo > 0x13) && (resinfo - == 9) && (!(tempbx & EnableScalingLCD))) + & SetCRT2ToLCD) && (resinfo == 9) && + (!(tempbx & EnableScalingLCD))) /* set to center in 1280x1024 LCDB for Panel_1400x1050 */ tempbx |= SetLCDtoNonExpanding; } @@ -3453,12 +3071,9 @@ static unsigned char XGI_GetLCDInfo(unsigned short ModeNo, if (!(tempbx & SetLCDtoNonExpanding)) { tempbx |= XGI_EnableLVDSDDA; } else { - if (ModeNo > 0x13) { - if (pVBInfo->LCDResInfo - == Panel_1024x768) { - if (resinfo == 4) {/* 512x384 */ - tempbx |= XGI_EnableLVDSDDA; - } + if (pVBInfo->LCDResInfo == Panel_1024x768) { + if (resinfo == 4) {/* 512x384 */ + tempbx |= XGI_EnableLVDSDDA; } } } @@ -3474,56 +3089,17 @@ static unsigned char XGI_GetLCDInfo(unsigned short ModeNo, pVBInfo->LCDInfo = tempbx; - if (pVBInfo->IF_DEF_LVDS == 0) { - if (tempax & (LockLCDBToA | StLCDBToA)) { - if (pVBInfo->VBInfo & SetInSlaveMode) { - if (!(tempax & LockLCDBToA)) { - if (ModeNo <= 0x13) { - pVBInfo->VBInfo &= - ~(SetSimuScanMode | - SetInSlaveMode | - SetCRT2ToLCD); - pVBInfo->VBInfo |= - XGI_SetCRT2ToLCDA | - SetCRT2ToDualEdge; - } - } - } - } - } - return 1; } unsigned char XGI_SearchModeID(unsigned short ModeNo, unsigned short *ModeIdIndex, struct vb_device_info *pVBInfo) { - if (ModeNo <= 5) - ModeNo |= 1; - if (ModeNo <= 0x13) { - for (*ModeIdIndex = 0;; (*ModeIdIndex)++) { - if (pVBInfo->SModeIDTable[*ModeIdIndex].St_ModeID == - ModeNo) - break; - if (pVBInfo->SModeIDTable[*ModeIdIndex].St_ModeID == - 0xFF) - return 0; - } - - if (ModeNo == 0x07) - (*ModeIdIndex)++; /* 400 lines */ - if (ModeNo <= 3) - (*ModeIdIndex) += 2; /* 400 lines */ - /* else 350 lines */ - } else { - for (*ModeIdIndex = 0;; (*ModeIdIndex)++) { - if (pVBInfo->EModeIDTable[*ModeIdIndex].Ext_ModeID == - ModeNo) - break; - if (pVBInfo->EModeIDTable[*ModeIdIndex].Ext_ModeID == - 0xFF) - return 0; - } + for (*ModeIdIndex = 0;; (*ModeIdIndex)++) { + if (pVBInfo->EModeIDTable[*ModeIdIndex].Ext_ModeID == ModeNo) + break; + if (pVBInfo->EModeIDTable[*ModeIdIndex].Ext_ModeID == 0xFF) + return 0; } return 1; @@ -3789,22 +3365,17 @@ static void XGI_GetCRT2ResInfo(unsigned short ModeNo, { unsigned short xres, yres, modeflag, resindex; - resindex = XGI_GetResInfo(ModeNo, ModeIdIndex, pVBInfo); - if (ModeNo <= 0x13) { - xres = pVBInfo->StResInfo[resindex].HTotal; - yres = pVBInfo->StResInfo[resindex].VTotal; - } else { - xres = pVBInfo->ModeResInfo[resindex].HTotal; /* xres->ax */ - yres = pVBInfo->ModeResInfo[resindex].VTotal; /* yres->bx */ - /* si+St_ModeFlag */ - modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag; + resindex = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO; + xres = pVBInfo->ModeResInfo[resindex].HTotal; /* xres->ax */ + yres = pVBInfo->ModeResInfo[resindex].VTotal; /* yres->bx */ + /* si+St_ModeFlag */ + modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag; - if (modeflag & HalfDCLK) - xres *= 2; + if (modeflag & HalfDCLK) + xres *= 2; - if (modeflag & DoubleScanMode) - yres *= 2; - } + if (modeflag & DoubleScanMode) + yres *= 2; if (pVBInfo->VBInfo & SetCRT2ToLCD) { if (pVBInfo->IF_DEF_LVDS == 0) { @@ -3868,37 +3439,23 @@ static void XGI_GetRAMDAC2DATA(unsigned short ModeNo, struct vb_device_info *pVBInfo) { unsigned short tempax, tempbx, temp1, temp2, modeflag = 0, tempcx, - StandTableIndex, CRT1Index; + CRT1Index; pVBInfo->RVBHCMAX = 1; pVBInfo->RVBHCFACT = 1; - - if (ModeNo <= 0x13) { - modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag; - StandTableIndex = XGI_GetModePtr(ModeNo, ModeIdIndex, pVBInfo); - tempax = pVBInfo->StandTable[StandTableIndex].CRTC[0]; - tempbx = pVBInfo->StandTable[StandTableIndex].CRTC[6]; - temp1 = pVBInfo->StandTable[StandTableIndex].CRTC[7]; - } else { - modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag; - CRT1Index = pVBInfo->RefIndex[RefreshRateTableIndex]. - Ext_CRT1CRTC; - CRT1Index &= IndexMask; - temp1 = (unsigned short) pVBInfo-> - XGINEWUB_CRT1Table[CRT1Index].CR[0]; - temp2 = (unsigned short) pVBInfo-> - XGINEWUB_CRT1Table[CRT1Index].CR[5]; - tempax = (temp1 & 0xFF) | ((temp2 & 0x03) << 8); - tempbx = (unsigned short) pVBInfo-> - XGINEWUB_CRT1Table[CRT1Index].CR[8]; - tempcx = (unsigned short) pVBInfo-> - XGINEWUB_CRT1Table[CRT1Index].CR[14] << 8; - tempcx &= 0x0100; - tempcx = tempcx << 2; - tempbx |= tempcx; - temp1 = (unsigned short) pVBInfo-> - XGINEWUB_CRT1Table[CRT1Index].CR[9]; - } + modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag; + CRT1Index = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRT1CRTC; + CRT1Index &= IndexMask; + temp1 = (unsigned short) pVBInfo->XGINEWUB_CRT1Table[CRT1Index].CR[0]; + temp2 = (unsigned short) pVBInfo->XGINEWUB_CRT1Table[CRT1Index].CR[5]; + tempax = (temp1 & 0xFF) | ((temp2 & 0x03) << 8); + tempbx = (unsigned short) pVBInfo->XGINEWUB_CRT1Table[CRT1Index].CR[8]; + tempcx = (unsigned short) + pVBInfo->XGINEWUB_CRT1Table[CRT1Index].CR[14] << 8; + tempcx &= 0x0100; + tempcx = tempcx << 2; + tempbx |= tempcx; + temp1 = (unsigned short) pVBInfo->XGINEWUB_CRT1Table[CRT1Index].CR[9]; if (temp1 & 0x01) tempbx |= 0x0100; @@ -3928,16 +3485,9 @@ static void XGI_GetCRT2Data(unsigned short ModeNo, unsigned short ModeIdIndex, struct SiS_LCDData *LCDPtr = NULL; struct SiS_TVData *TVPtr = NULL; - if (ModeNo <= 0x13) { - /* si+St_ResInfo */ - modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag; - resinfo = pVBInfo->SModeIDTable[ModeIdIndex].St_ResInfo; - } else { - /* si+Ext_ResInfo */ - modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag; - resinfo = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO; - } - + /* si+Ext_ResInfo */ + modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag; + resinfo = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO; pVBInfo->NewFlickerMode = 0; pVBInfo->RVBHRS = 50; @@ -4141,11 +3691,7 @@ static unsigned short XGI_GetColorDepth(unsigned short ModeNo, short index; unsigned short modeflag; - if (ModeNo <= 0x13) - modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag; - else - modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag; - + modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag; index = (modeflag & ModeTypeMask) - ModeEGA; if (index < 0) @@ -4164,11 +3710,7 @@ static unsigned short XGI_GetOffset(unsigned short ModeNo, ColorDepth[] = { 0x01, 0x02, 0x04 }; modeinfo = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeInfo; - if (ModeNo <= 0x14) - infoflag = 0; - else - infoflag = pVBInfo-> - RefIndex[RefreshRateTableIndex].Ext_InfoFlag; + infoflag = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_InfoFlag; index = (modeinfo >> 8) & 0xFF; @@ -4228,12 +3770,9 @@ static void XGI_PreSetGroup1(unsigned short ModeNo, unsigned short ModeIdIndex, { unsigned short tempcx = 0, CRT1Index = 0, resinfo = 0; - if (ModeNo > 0x13) { - CRT1Index = pVBInfo-> - RefIndex[RefreshRateTableIndex].Ext_CRT1CRTC; - CRT1Index &= IndexMask; - resinfo = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO; - } + CRT1Index = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRT1CRTC; + CRT1Index &= IndexMask; + resinfo = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO; XGI_SetCRT2Offset(ModeNo, ModeIdIndex, RefreshRateTableIndex, HwDeviceExtension, pVBInfo); @@ -4254,17 +3793,10 @@ static void XGI_SetGroup1(unsigned short ModeNo, unsigned short ModeIdIndex, unsigned short temp = 0, tempax = 0, tempbx = 0, tempcx = 0, pushbx = 0, CRT1Index = 0, modeflag, resinfo = 0; - if (ModeNo > 0x13) { - CRT1Index = pVBInfo-> - RefIndex[RefreshRateTableIndex].Ext_CRT1CRTC; - CRT1Index &= IndexMask; - resinfo = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO; - } - - if (ModeNo <= 0x13) - modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag; - else - modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag; + CRT1Index = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRT1CRTC; + CRT1Index &= IndexMask; + resinfo = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO; + modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag; /* bainy change table name */ if (modeflag & HalfDCLK) { @@ -4422,18 +3954,11 @@ static void XGI_SetLockRegs(unsigned short ModeNo, unsigned short ModeIdIndex, unsigned short push1, push2, tempax, tempbx = 0, tempcx, temp, resinfo, modeflag, CRT1Index; - if (ModeNo <= 0x13) { - /* si+St_ResInfo */ - modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag; - resinfo = pVBInfo->SModeIDTable[ModeIdIndex].St_ResInfo; - } else { - /* si+Ext_ResInfo */ - modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag; - resinfo = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO; - CRT1Index = pVBInfo-> - RefIndex[RefreshRateTableIndex].Ext_CRT1CRTC; - CRT1Index &= IndexMask; - } + /* si+Ext_ResInfo */ + modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag; + resinfo = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO; + CRT1Index = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRT1CRTC; + CRT1Index &= IndexMask; if (!(pVBInfo->VBInfo & SetInSlaveMode)) return; @@ -4500,8 +4025,7 @@ static void XGI_SetLockRegs(unsigned short ModeNo, unsigned short ModeIdIndex, temp -= 6; if (pVBInfo->TVInfo & TVSimuMode) { temp -= 4; - if (ModeNo > 0x13) - temp -= 10; + temp -= 10; } } } else { @@ -4523,14 +4047,6 @@ static void XGI_SetLockRegs(unsigned short ModeNo, unsigned short ModeIdIndex, if (pVBInfo->LCDResInfo != Panel_1280x960 && pVBInfo->VGAHDE >= 800) { temp -= 7; - if (pVBInfo->ModeType == ModeEGA && - pVBInfo->VGAVDE == 1024) { - temp += 15; - if (pVBInfo->LCDResInfo != - Panel_1280x1024) - temp += 7; - } - if (pVBInfo->VGAHDE >= 1280 && pVBInfo->LCDResInfo != Panel_1280x960 && (pVBInfo->LCDInfo & LCDNonExpanding)) @@ -4546,48 +4062,7 @@ static void XGI_SetLockRegs(unsigned short ModeNo, unsigned short ModeIdIndex, if (pVBInfo->VBInfo & SetCRT2ToTV) { if (pVBInfo->TVInfo & TVSimuMode) { - if ((ModeNo == 0x06) || (ModeNo == 0x10) || (ModeNo - == 0x11) || (ModeNo == 0x13) || (ModeNo - == 0x0F)) { - xgifb_reg_set(pVBInfo->Part1Port, 0x07, 0x5b); - xgifb_reg_set(pVBInfo->Part1Port, 0x08, 0x03); - } - - if ((ModeNo == 0x00) || (ModeNo == 0x01)) { - if (pVBInfo->TVInfo & SetNTSCTV) { - xgifb_reg_set(pVBInfo->Part1Port, - 0x07, 0x2A); - xgifb_reg_set(pVBInfo->Part1Port, - 0x08, 0x61); - } else { - xgifb_reg_set(pVBInfo->Part1Port, - 0x07, 0x2A); - xgifb_reg_set(pVBInfo->Part1Port, - 0x08, 0x41); - xgifb_reg_set(pVBInfo->Part1Port, - 0x0C, 0xF0); - } - } - - if ((ModeNo == 0x02) || (ModeNo == 0x03) || (ModeNo - == 0x07)) { - if (pVBInfo->TVInfo & SetNTSCTV) { - xgifb_reg_set(pVBInfo->Part1Port, - 0x07, 0x54); - xgifb_reg_set(pVBInfo->Part1Port, - 0x08, 0x00); - } else { - xgifb_reg_set(pVBInfo->Part1Port, - 0x07, 0x55); - xgifb_reg_set(pVBInfo->Part1Port, - 0x08, 0x00); - xgifb_reg_set(pVBInfo->Part1Port, - 0x0C, 0xF0); - } - } - - if ((ModeNo == 0x04) || (ModeNo == 0x05) || (ModeNo - == 0x0D) || (ModeNo == 0x50)) { + if (ModeNo == 0x50) { if (pVBInfo->TVInfo & SetNTSCTV) { xgifb_reg_set(pVBInfo->Part1Port, 0x07, 0x30); @@ -4796,18 +4271,10 @@ static void XGI_SetGroup2(unsigned short ModeNo, unsigned short ModeIdIndex, unsigned long longtemp, tempeax, tempebx, temp2, tempecx; - if (ModeNo <= 0x13) { - /* si+St_ResInfo */ - modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag; - resinfo = pVBInfo->SModeIDTable[ModeIdIndex].St_ResInfo; - crt2crtc = pVBInfo->SModeIDTable[ModeIdIndex].St_CRT2CRTC; - } else { - /* si+Ext_ResInfo */ - modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag; - resinfo = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO; - crt2crtc = pVBInfo->RefIndex[RefreshRateTableIndex]. - Ext_CRT2CRTC; - } + /* si+Ext_ResInfo */ + modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag; + resinfo = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO; + crt2crtc = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRT2CRTC; tempax = 0; @@ -5245,18 +4712,11 @@ static void XGI_SetLCDRegs(unsigned short ModeNo, unsigned short ModeIdIndex, struct XGI_LCDDesStruct *LCDBDesPtr = NULL; - if (ModeNo <= 0x13) { - /* si+St_ResInfo */ - modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag; - resinfo = pVBInfo->SModeIDTable[ModeIdIndex].St_ResInfo; - } else { - /* si+Ext_ResInfo */ - modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag; - resinfo = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO; - CRT1Index = pVBInfo->RefIndex[RefreshRateTableIndex]. - Ext_CRT1CRTC; - CRT1Index &= IndexMask; - } + /* si+Ext_ResInfo */ + modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag; + resinfo = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO; + CRT1Index = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRT1CRTC; + CRT1Index &= IndexMask; if (!(pVBInfo->VBInfo & SetCRT2ToLCD)) return; @@ -5274,16 +4734,6 @@ static void XGI_SetLCDRegs(unsigned short ModeNo, unsigned short ModeIdIndex, xgifb_reg_and_or(pVBInfo->Part2Port, 0x2B, 0x0F, temp); temp = 0x01; - if (pVBInfo->LCDResInfo == Panel_1280x1024) { - if (pVBInfo->ModeType == ModeEGA) { - if (pVBInfo->VGAHDE >= 1024) { - temp = 0x02; - if (pVBInfo->LCDInfo & XGI_LCDVESATiming) - temp = 0x01; - } - } - } - xgifb_reg_set(pVBInfo->Part2Port, 0x0B, temp); tempbx = pVBInfo->VDE; /* RTVACTEO=(VDE-1)&0xFF */ push1 = tempbx; @@ -5542,12 +4992,8 @@ static void XGI_SetGroup3(unsigned short ModeNo, unsigned short ModeIdIndex, unsigned char *tempdi; unsigned short modeflag; - if (ModeNo <= 0x13) - /* si+St_ResInfo */ - modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag; - else - /* si+Ext_ResInfo */ - modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag; + /* si+Ext_ResInfo */ + modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag; xgifb_reg_set(pVBInfo->Part3Port, 0x00, 0x00); if (pVBInfo->TVInfo & TVSetPAL) { @@ -5605,13 +5051,8 @@ static void XGI_SetGroup4(unsigned short ModeNo, unsigned short ModeIdIndex, unsigned long tempebx, tempeax, templong; - if (ModeNo <= 0x13) - /* si+St_ResInfo */ - modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag; - else - /* si+Ext_ResInfo */ - modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag; - + /* si+Ext_ResInfo */ + modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag; temp = pVBInfo->RVBHCFACT; xgifb_reg_set(pVBInfo->Part4Port, 0x13, temp); @@ -5818,32 +5259,22 @@ static unsigned char XGI_XG21CheckLVDSMode(struct xgifb_video_info *xgifb_info, { unsigned short xres, yres, colordepth, modeflag, resindex; - resindex = XGI_GetResInfo(ModeNo, ModeIdIndex, pVBInfo); - if (ModeNo <= 0x13) { - xres = pVBInfo->StResInfo[resindex].HTotal; - yres = pVBInfo->StResInfo[resindex].VTotal; - /* si+St_ResInfo */ - modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag; - } else { - xres = pVBInfo->ModeResInfo[resindex].HTotal; /* xres->ax */ - yres = pVBInfo->ModeResInfo[resindex].VTotal; /* yres->bx */ - /* si+St_ModeFlag */ - modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag; - } + resindex = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO; + xres = pVBInfo->ModeResInfo[resindex].HTotal; /* xres->ax */ + yres = pVBInfo->ModeResInfo[resindex].VTotal; /* yres->bx */ + /* si+St_ModeFlag */ + modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag; if (!(modeflag & Charx8Dot)) { xres /= 9; xres *= 8; } - if (ModeNo > 0x13) { - if ((ModeNo > 0x13) && (modeflag & HalfDCLK)) - xres *= 2; - - if ((ModeNo > 0x13) && (modeflag & DoubleScanMode)) - yres *= 2; + if ((ModeNo > 0x13) && (modeflag & HalfDCLK)) + xres *= 2; - } + if ((ModeNo > 0x13) && (modeflag & DoubleScanMode)) + yres *= 2; if (xres > xgifb_info->lvds_data.LVDSHDE) return 0; @@ -5851,16 +5282,11 @@ static unsigned char XGI_XG21CheckLVDSMode(struct xgifb_video_info *xgifb_info, if (yres > xgifb_info->lvds_data.LVDSVDE) return 0; - if (ModeNo > 0x13) { - if (xres != xgifb_info->lvds_data.LVDSHDE || - yres != xgifb_info->lvds_data.LVDSVDE) { - colordepth = XGI_GetColorDepth(ModeNo, - ModeIdIndex, - pVBInfo); - if (colordepth > 2) - return 0; - - } + if (xres != xgifb_info->lvds_data.LVDSHDE || + yres != xgifb_info->lvds_data.LVDSVDE) { + colordepth = XGI_GetColorDepth(ModeNo, ModeIdIndex, pVBInfo); + if (colordepth > 2) + return 0; } return 1; } @@ -5895,18 +5321,11 @@ static void xgifb_set_lvds(struct xgifb_video_info *xgifb_info, else XGI_SetXG21FPBits(pVBInfo); - resindex = XGI_GetResInfo(ModeNo, ModeIdIndex, pVBInfo); - if (ModeNo <= 0x13) { - xres = pVBInfo->StResInfo[resindex].HTotal; - yres = pVBInfo->StResInfo[resindex].VTotal; - /* si+St_ResInfo */ - modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag; - } else { - xres = pVBInfo->ModeResInfo[resindex].HTotal; /* xres->ax */ - yres = pVBInfo->ModeResInfo[resindex].VTotal; /* yres->bx */ - /* si+St_ModeFlag */ - modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag; - } + resindex = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO; + xres = pVBInfo->ModeResInfo[resindex].HTotal; /* xres->ax */ + yres = pVBInfo->ModeResInfo[resindex].VTotal; /* yres->bx */ + /* si+St_ModeFlag */ + modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag; if (!(modeflag & Charx8Dot)) xres = xres * 8 / 9; @@ -5914,8 +5333,6 @@ static void xgifb_set_lvds(struct xgifb_video_info *xgifb_info, LVDSHT = xgifb_info->lvds_data.LVDSHT; LVDSHBS = xres + (xgifb_info->lvds_data.LVDSHDE - xres) / 2; - if ((ModeNo <= 0x13) && (modeflag & HalfDCLK)) - LVDSHBS -= xres / 4; if (LVDSHBS > LVDSHT) LVDSHBS -= LVDSHT; @@ -5933,7 +5350,7 @@ static void xgifb_set_lvds(struct xgifb_video_info *xgifb_info, LVDSVT = xgifb_info->lvds_data.LVDSVT; LVDSVBS = yres + (xgifb_info->lvds_data.LVDSVDE - yres) / 2; - if ((ModeNo > 0x13) && (modeflag & DoubleScanMode)) + if (modeflag & DoubleScanMode) LVDSVBS += yres / 2; if (LVDSVBS > LVDSVT) @@ -6527,7 +5944,7 @@ static void XGI_SetAntiFlicker(unsigned short ModeNo, unsigned short ModeIdIndex, struct vb_device_info *pVBInfo) { - unsigned short tempbx, index; + unsigned short tempbx; unsigned char tempah; @@ -6536,13 +5953,6 @@ static void XGI_SetAntiFlicker(unsigned short ModeNo, tempbx = XGI_GetTVPtrIndex(pVBInfo); tempbx &= 0xFE; - - if (ModeNo <= 0x13) - index = pVBInfo->SModeIDTable[ModeIdIndex].VB_StTVFlickerIndex; - else - index = pVBInfo->EModeIDTable[ModeIdIndex].VB_ExtTVFlickerIndex; - - tempbx += index; tempah = TVAntiFlickList[tempbx]; tempah = tempah << 4; @@ -6553,19 +5963,12 @@ static void XGI_SetEdgeEnhance(unsigned short ModeNo, unsigned short ModeIdIndex, struct vb_device_info *pVBInfo) { - unsigned short tempbx, index; + unsigned short tempbx; unsigned char tempah; tempbx = XGI_GetTVPtrIndex(pVBInfo); tempbx &= 0xFE; - - if (ModeNo <= 0x13) - index = pVBInfo->SModeIDTable[ModeIdIndex].VB_StTVEdgeIndex; - else - index = pVBInfo->EModeIDTable[ModeIdIndex].VB_ExtTVEdgeIndex; - - tempbx += index; tempah = TVEdgeList[tempbx]; tempah = tempah << 5; @@ -6631,13 +6034,7 @@ static void XGI_SetYFilter(unsigned short ModeNo, unsigned short ModeIdIndex, return; } - if (ModeNo <= 0x13) - tempal = pVBInfo->SModeIDTable[ModeIdIndex]. - VB_StTVYFilterIndex; - else - tempal = pVBInfo->EModeIDTable[ModeIdIndex]. - VB_ExtTVYFilterIndex; - + tempal = pVBInfo->EModeIDTable[ModeIdIndex].VB_ExtTVYFilterIndex; if (tempcl == 0) index = tempal * 4; else @@ -6712,16 +6109,14 @@ static void XGI_SetCRT2ModeRegs(unsigned short ModeNo, if (pVBInfo->VBInfo & (SetCRT2ToRAMDAC | SetCRT2ToTV | SetCRT2ToLCD)) { tempah = 0x40; /* BTDRAM */ - if (ModeNo > 0x13) { - tempcl = pVBInfo->ModeType; - tempcl -= ModeVGA; - if (tempcl >= 0) { - /* BT Color */ - tempah = (0x008 >> tempcl); - if (tempah == 0) - tempah = 1; - tempah |= 0x040; - } + tempcl = pVBInfo->ModeType; + tempcl -= ModeVGA; + if (tempcl >= 0) { + /* BT Color */ + tempah = (0x008 >> tempcl); + if (tempah == 0) + tempah = 1; + tempah |= 0x040; } if (pVBInfo->VBInfo & SetInSlaveMode) tempah ^= 0x50; /* BTDAC */ @@ -6797,10 +6192,8 @@ static void XGI_SetCRT2ModeRegs(unsigned short ModeNo, if (pVBInfo->VBInfo & SetCRT2ToTV) { tempah |= 0x020; - if (ModeNo > 0x13) { - if (pVBInfo->VBInfo & DriverMode) - tempah = tempah ^ 0x20; - } + if (pVBInfo->VBInfo & DriverMode) + tempah = tempah ^ 0x20; } xgifb_reg_and_or(pVBInfo->Part4Port, 0x0D, ~0x0BF, tempah); @@ -6925,13 +6318,7 @@ unsigned short XGI_GetRatePtrCRT2(struct xgi_hw_device_info *pXGIHWDE, unsigned short RefreshRateTableIndex, i, modeflag, index, temp; - if (ModeNo <= 0x13) - modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag; - else - modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag; - - if (ModeNo < 0x14) - return 0xFFFF; + modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag; index = xgifb_reg_get(pVBInfo->P3d4, 0x33); index = index >> pVBInfo->SelectCRT2Rate; @@ -7297,16 +6684,13 @@ static void XGI_SetCRT1Group(struct xgifb_video_info *xgifb_info, unsigned short ModeNo, unsigned short ModeIdIndex, struct vb_device_info *pVBInfo) { - unsigned short StandTableIndex, RefreshRateTableIndex, b3CC, temp; + unsigned short RefreshRateTableIndex, temp; - unsigned short XGINew_P3cc = pVBInfo->P3cc; - - StandTableIndex = XGI_GetModePtr(ModeNo, ModeIdIndex, pVBInfo); - XGI_SetSeqRegs(ModeNo, StandTableIndex, ModeIdIndex, pVBInfo); - outb(pVBInfo->StandTable[StandTableIndex].MISC, pVBInfo->P3c2); - XGI_SetCRTCRegs(HwDeviceExtension, StandTableIndex, pVBInfo); - XGI_SetATTRegs(ModeNo, StandTableIndex, ModeIdIndex, pVBInfo); - XGI_SetGRCRegs(StandTableIndex, pVBInfo); + XGI_SetSeqRegs(ModeNo, ModeIdIndex, pVBInfo); + outb(pVBInfo->StandTable->MISC, pVBInfo->P3c2); + XGI_SetCRTCRegs(HwDeviceExtension, pVBInfo); + XGI_SetATTRegs(ModeNo, ModeIdIndex, pVBInfo); + XGI_SetGRCRegs(pVBInfo); XGI_ClearExt1Regs(pVBInfo); if (HwDeviceExtension->jChipType == XG27) { @@ -7340,22 +6724,6 @@ static void XGI_SetCRT1Group(struct xgifb_video_info *xgifb_info, RefreshRateTableIndex, pVBInfo); } - if ((HwDeviceExtension->jChipType >= XG20) && - (HwDeviceExtension->jChipType < XG27)) { /* fix H/W DCLK/2 bug */ - if ((ModeNo == 0x00) | (ModeNo == 0x01)) { - xgifb_reg_set(pVBInfo->P3c4, 0x2B, 0x4E); - xgifb_reg_set(pVBInfo->P3c4, 0x2C, 0xE9); - b3CC = (unsigned char) inb(XGINew_P3cc); - outb((b3CC |= 0x0C), XGINew_P3cc); - } else if ((ModeNo == 0x04) | (ModeNo == 0x05) | (ModeNo - == 0x0D)) { - xgifb_reg_set(pVBInfo->P3c4, 0x2B, 0x1B); - xgifb_reg_set(pVBInfo->P3c4, 0x2C, 0xE3); - b3CC = (unsigned char) inb(XGINew_P3cc); - outb((b3CC |= 0x0C), XGINew_P3cc); - } - } - if (HwDeviceExtension->jChipType >= XG21) { temp = xgifb_reg_get(pVBInfo->P3d4, 0x38); if (temp & 0xA0) { @@ -7394,7 +6762,7 @@ unsigned char XGISetModeNew(struct xgifb_video_info *xgifb_info, unsigned short ModeIdIndex; struct vb_device_info VBINF; struct vb_device_info *pVBInfo = &VBINF; - pVBInfo->BaseAddr = (unsigned long) HwDeviceExtension->pjIOAddress; + pVBInfo->BaseAddr = xgifb_info->vga_base; pVBInfo->IF_DEF_LVDS = 0; pVBInfo->IF_DEF_LCDA = 1; @@ -7509,13 +6877,8 @@ unsigned char XGISetModeNew(struct xgifb_video_info *xgifb_info, pVBInfo)) return 0; - if (ModeNo <= 0x13) { - pVBInfo->ModeType = pVBInfo->SModeIDTable[ModeIdIndex]. - St_ModeFlag & ModeTypeMask; - } else { - pVBInfo->ModeType = pVBInfo->EModeIDTable[ModeIdIndex]. + pVBInfo->ModeType = pVBInfo->EModeIDTable[ModeIdIndex]. Ext_ModeFlag & ModeTypeMask; - } pVBInfo->SetFlag = 0; pVBInfo->VBInfo = DisableCRT2Display; diff --git a/drivers/staging/xgifb/vb_struct.h b/drivers/staging/xgifb/vb_struct.h index a5bd56af92b..38f47ffc69c 100644 --- a/drivers/staging/xgifb/vb_struct.h +++ b/drivers/staging/xgifb/vb_struct.h @@ -10,28 +10,11 @@ struct XGI_LVDSCRT1VDataStruct { unsigned char Reg[7]; }; -struct XGI_StStruct { - unsigned char St_ModeID; - unsigned short St_ModeFlag; - unsigned char St_StTableIndex; - unsigned char St_CRT2CRTC; - unsigned char St_CRT2CRTC2; - unsigned char St_ResInfo; - unsigned char VB_StTVFlickerIndex; - unsigned char VB_StTVEdgeIndex; - unsigned char VB_StTVYFilterIndex; -}; - struct XGI_ExtStruct { unsigned char Ext_ModeID; unsigned short Ext_ModeFlag; unsigned short Ext_ModeInfo; - unsigned short Ext_Point; - unsigned short Ext_VESAID; - unsigned char Ext_VESAMEMSize; unsigned char Ext_RESINFO; - unsigned char VB_ExtTVFlickerIndex; - unsigned char VB_ExtTVEdgeIndex; unsigned char VB_ExtTVYFilterIndex; unsigned char REFindex; }; @@ -68,14 +51,6 @@ struct XGI_LCDDataTablStruct { unsigned short DATAPTR; }; -struct XGI330_LCDDataDesStruct { - unsigned short LCDHDES; - unsigned short LCDHRS; - unsigned short LCDVDES; - unsigned short LCDVRS; -}; - - struct XGI330_LVDSDataStruct { unsigned short VGAHT; unsigned short VGAVT; @@ -236,7 +211,6 @@ struct vb_device_info { void __iomem *FBAddr; unsigned long BaseAddr; - unsigned long RelIO; unsigned char (*CR6B)[4]; unsigned char (*CR6E)[4]; @@ -314,7 +288,6 @@ struct vb_device_info { struct XGI_TimingHStruct *TimingH; struct XGI_TimingVStruct *TimingV; - struct XGI_StStruct *SModeIDTable; struct SiS_StandTable_S *StandTable; struct XGI_ExtStruct *EModeIDTable; struct XGI_Ext2Struct *RefIndex; diff --git a/drivers/staging/xgifb/vb_table.h b/drivers/staging/xgifb/vb_table.h index e8d6f674b27..d22e599cb30 100644 --- a/drivers/staging/xgifb/vb_table.h +++ b/drivers/staging/xgifb/vb_table.h @@ -135,609 +135,92 @@ static unsigned char XGI330_SR33; static unsigned char XG40_CRCF = 0x13; static unsigned char XG40_DRAMTypeDefinition = 0xFF ; -static struct XGI_StStruct XGI330_SModeIDTable[] = { - {0x01, 0x9208, 0x01, 0x00, 0x10, 0x00, 0x00, 0x01, 0x00}, - {0x01, 0x1210, 0x14, 0x01, 0x00, 0x01, 0x00, 0x01, 0x00}, - {0x01, 0x1010, 0x17, 0x02, 0x11, 0x00, 0x00, 0x01, 0x01}, - {0x03, 0x8208, 0x03, 0x00, 0x14, 0x00, 0x00, 0x01, 0x02}, - {0x03, 0x0210, 0x16, 0x01, 0x04, 0x01, 0x00, 0x01, 0x02}, - {0x03, 0x0010, 0x18, 0x02, 0x15, 0x00, 0x00, 0x01, 0x03}, - {0x05, 0x9209, 0x05, 0x00, 0x10, 0x00, 0x00, 0x00, 0x04}, - {0x06, 0x8209, 0x06, 0x00, 0x14, 0x00, 0x00, 0x00, 0x05}, - {0x07, 0x0000, 0x07, 0x03, 0x05, 0x03, 0x00, 0x01, 0x03}, - {0x07, 0x0000, 0x19, 0x02, 0x15, 0x02, 0x00, 0x01, 0x03}, - {0x0d, 0x920a, 0x0d, 0x00, 0x10, 0x00, 0x00, 0x00, 0x04}, - {0x0e, 0x820a, 0x0e, 0x00, 0x14, 0x00, 0x00, 0x00, 0x05}, - {0x0f, 0x0202, 0x11, 0x01, 0x04, 0x01, 0x00, 0x00, 0x05}, - {0x10, 0x0212, 0x12, 0x01, 0x04, 0x01, 0x00, 0x00, 0x05}, - {0x11, 0x0212, 0x1a, 0x04, 0x24, 0x04, 0x00, 0x00, 0x05}, - {0x12, 0x0212, 0x1b, 0x04, 0x24, 0x04, 0x00, 0x00, 0x05}, - {0x13, 0x021b, 0x1c, 0x00, 0x14, 0x00, 0x00, 0x00, 0x04}, - {0x12, 0x0010, 0x18, 0x02, 0x24, 0x02, 0x00, 0x00, 0x05},/* St_CRT2CRTC2 - not sure */ - {0x12, 0x0210, 0x18, 0x01, 0x24, 0x01, 0x00, 0x00, 0x05},/* St_CRT2CRTC2 - not sure */ - {0xff, 0x0000, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00} -}; - - static struct XGI_ExtStruct XGI330_EModeIDTable[] = { - {0x6a, 0x2212, 0x0407, 0x3a81, 0x0102, 0x08, - 0x07, 0x00, 0x00, 0x07, 0x0e}, - {0x2e, 0x0a1b, 0x0306, 0x3a57, 0x0101, 0x08, - 0x06, 0x00, 0x00, 0x05, 0x06}, - {0x2f, 0x0a1b, 0x0305, 0x3a50, 0x0100, 0x08, - 0x05, 0x00, 0x00, 0x05, 0x05}, - {0x30, 0x2a1b, 0x0407, 0x3a81, 0x0103, 0x08, - 0x07, 0x00, 0x00, 0x07, 0x0e}, - {0x31, 0x0a1b, 0x030d, 0x3b85, 0x0000, 0x08, - 0x0d, 0x00, 0x00, 0x06, 0x3d}, - {0x32, 0x0a1b, 0x0a0e, 0x3b8c, 0x0000, 0x08, - 0x0e, 0x00, 0x00, 0x06, 0x3e}, - {0x33, 0x0a1d, 0x0a0d, 0x3b85, 0x0000, 0x08, - 0x0d, 0x00, 0x00, 0x06, 0x3d}, - {0x34, 0x2a1d, 0x0a0e, 0x3b8c, 0x0000, 0x08, - 0x0e, 0x00, 0x00, 0x06, 0x3e}, - {0x35, 0x0a1f, 0x0a0d, 0x3b85, 0x0000, 0x08, - 0x0d, 0x00, 0x00, 0x06, 0x3d}, - {0x36, 0x2a1f, 0x0a0e, 0x3b8c, 0x0000, 0x08, - 0x0e, 0x00, 0x00, 0x06, 0x3e}, - {0x37, 0x0212, 0x0508, 0x3aab, 0x0104, 0x08, - 0x08, 0x00, 0x00, 0x00, 0x16}, - {0x38, 0x0a1b, 0x0508, 0x3aab, 0x0105, 0x08, - 0x08, 0x00, 0x00, 0x00, 0x16}, - {0x3a, 0x0e3b, 0x0609, 0x3adc, 0x0107, 0x08, - 0x09, 0x00, 0x00, 0x00, 0x1e}, - {0x3c, 0x0e3b, 0x070a, 0x3af2, 0x0130, 0x08, - 0x0a, 0x00, 0x00, 0x00, 0x22}, /* mode 1600x1200 + {0x2e, 0x0a1b, 0x0306, 0x06, 0x05, 0x06}, + {0x2f, 0x0a1b, 0x0305, 0x05, 0x05, 0x05}, + {0x30, 0x2a1b, 0x0407, 0x07, 0x07, 0x0e}, + {0x31, 0x0a1b, 0x030d, 0x0d, 0x06, 0x3d}, + {0x32, 0x0a1b, 0x0a0e, 0x0e, 0x06, 0x3e}, + {0x33, 0x0a1d, 0x0a0d, 0x0d, 0x06, 0x3d}, + {0x34, 0x2a1d, 0x0a0e, 0x0e, 0x06, 0x3e}, + {0x35, 0x0a1f, 0x0a0d, 0x0d, 0x06, 0x3d}, + {0x36, 0x2a1f, 0x0a0e, 0x0e, 0x06, 0x3e}, + {0x38, 0x0a1b, 0x0508, 0x08, 0x00, 0x16}, + {0x3a, 0x0e3b, 0x0609, 0x09, 0x00, 0x1e}, + {0x3c, 0x0e3b, 0x070a, 0x0a, 0x00, 0x22}, /* mode 1600x1200 add CRT2MODE [2003/10/07] */ - {0x3d, 0x0e7d, 0x070a, 0x3af2, 0x0131, 0x08, - 0x0a, 0x00, 0x00, 0x00, 0x22}, /* mode 1600x1200 + {0x3d, 0x0e7d, 0x070a, 0x0a, 0x00, 0x22}, /* mode 1600x1200 add CRT2MODE */ - {0x40, 0x9a1c, 0x0000, 0x3a34, 0x010d, 0x08, - 0x00, 0x00, 0x00, 0x04, 0x00}, - {0x41, 0x9a1d, 0x0000, 0x3a34, 0x010e, 0x08, - 0x00, 0x00, 0x00, 0x04, 0x00}, /* ModeIdIndex = 0x10 */ - {0x43, 0x0a1c, 0x0306, 0x3a57, 0x0110, 0x08, - 0x06, 0x00, 0x00, 0x05, 0x06}, - {0x44, 0x0a1d, 0x0306, 0x3a57, 0x0111, 0x08, - 0x06, 0x00, 0x00, 0x05, 0x06}, - {0x46, 0x2a1c, 0x0407, 0x3a81, 0x0113, 0x08, - 0x07, 0x00, 0x00, 0x07, 0x0e}, - {0x47, 0x2a1d, 0x0407, 0x3a81, 0x0114, 0x08, - 0x07, 0x00, 0x00, 0x07, 0x0e}, - {0x49, 0x0a3c, 0x0508, 0x3aab, 0x0116, 0x08, - 0x08, 0x00, 0x00, 0x00, 0x16}, - {0x4a, 0x0a3d, 0x0508, 0x3aab, 0x0117, 0x08, - 0x08, 0x00, 0x00, 0x00, 0x16}, - {0x4c, 0x0e7c, 0x0609, 0x3adc, 0x0119, 0x08, - 0x09, 0x00, 0x00, 0x00, 0x1e}, - {0x4d, 0x0e7d, 0x0609, 0x3adc, 0x011a, 0x08, - 0x09, 0x00, 0x00, 0x00, 0x1e}, - {0x50, 0x9a1b, 0x0001, 0x3a3b, 0x0132, 0x08, - 0x01, 0x00, 0x00, 0x04, 0x02}, - {0x51, 0xba1b, 0x0103, 0x3a42, 0x0133, 0x08, - 0x03, 0x00, 0x00, 0x07, 0x03}, - {0x52, 0x9a1b, 0x0204, 0x3a49, 0x0134, 0x08, - 0x04, 0x00, 0x00, 0x00, 0x04}, - {0x56, 0x9a1d, 0x0001, 0x3a3b, 0x0135, 0x08, - 0x01, 0x00, 0x00, 0x04, 0x02}, - {0x57, 0xba1d, 0x0103, 0x3a42, 0x0136, 0x08, - 0x03, 0x00, 0x00, 0x07, 0x03}, - {0x58, 0x9a1d, 0x0204, 0x3a49, 0x0137, 0x08, - 0x04, 0x00, 0x00, 0x00, 0x04}, - {0x59, 0x9a1b, 0x0000, 0x3a34, 0x0138, 0x08, - 0x00, 0x00, 0x00, 0x04, 0x00}, - {0x5A, 0x021b, 0x0014, 0x3b83, 0x0138, 0x08, - 0x01, 0x00, 0x00, 0x04, 0x3f}, /* ModeIdIndex = 0x20 */ - {0x5B, 0x0a1d, 0x0014, 0x3b83, 0x0135, 0x08, - 0x01, 0x00, 0x00, 0x04, 0x3f}, - {0x5d, 0x0a1d, 0x0305, 0x3a50, 0x0139, 0x08, - 0x05, 0x00, 0x00, 0x07, 0x05}, - {0x62, 0x0a3f, 0x0306, 0x3a57, 0x013a, 0x08, - 0x06, 0x00, 0x00, 0x05, 0x06}, - {0x63, 0x2a3f, 0x0407, 0x3a81, 0x013b, 0x08, - 0x07, 0x00, 0x00, 0x07, 0x0e}, - {0x64, 0x0a7f, 0x0508, 0x3aab, 0x013c, 0x08, - 0x08, 0x00, 0x00, 0x00, 0x16}, - {0x65, 0x0eff, 0x0609, 0x3adc, 0x013d, 0x08, - 0x09, 0x00, 0x00, 0x00, 0x1e}, - {0x66, 0x0eff, 0x070a, 0x3af2, 0x013e, 0x08, - 0x0a, 0x00, 0x00, 0x00, 0x22}, /* mode 1600x1200 + {0x40, 0x9a1c, 0x0000, 0x00, 0x04, 0x00}, + {0x41, 0x9a1d, 0x0000, 0x00, 0x04, 0x00}, + {0x43, 0x0a1c, 0x0306, 0x06, 0x05, 0x06}, + {0x44, 0x0a1d, 0x0306, 0x06, 0x05, 0x06}, + {0x46, 0x2a1c, 0x0407, 0x07, 0x07, 0x0e}, + {0x47, 0x2a1d, 0x0407, 0x07, 0x07, 0x0e}, + {0x49, 0x0a3c, 0x0508, 0x08, 0x00, 0x16}, + {0x4a, 0x0a3d, 0x0508, 0x08, 0x00, 0x16}, + {0x4c, 0x0e7c, 0x0609, 0x09, 0x00, 0x1e}, + {0x4d, 0x0e7d, 0x0609, 0x09, 0x00, 0x1e}, + {0x50, 0x9a1b, 0x0001, 0x01, 0x04, 0x02}, + {0x51, 0xba1b, 0x0103, 0x03, 0x07, 0x03}, + {0x52, 0x9a1b, 0x0204, 0x04, 0x00, 0x04}, + {0x56, 0x9a1d, 0x0001, 0x01, 0x04, 0x02}, + {0x57, 0xba1d, 0x0103, 0x03, 0x07, 0x03}, + {0x58, 0x9a1d, 0x0204, 0x04, 0x00, 0x04}, + {0x59, 0x9a1b, 0x0000, 0x00, 0x04, 0x00}, + {0x5A, 0x021b, 0x0014, 0x01, 0x04, 0x3f}, + {0x5B, 0x0a1d, 0x0014, 0x01, 0x04, 0x3f}, + {0x5d, 0x0a1d, 0x0305, 0x05, 0x07, 0x05}, + {0x62, 0x0a3f, 0x0306, 0x06, 0x05, 0x06}, + {0x63, 0x2a3f, 0x0407, 0x07, 0x07, 0x0e}, + {0x64, 0x0a7f, 0x0508, 0x08, 0x00, 0x16}, + {0x65, 0x0eff, 0x0609, 0x09, 0x00, 0x1e}, + {0x66, 0x0eff, 0x070a, 0x0a, 0x00, 0x22}, /* mode 1600x1200 add CRT2MODE */ - {0x68, 0x067b, 0x080b, 0x3b17, 0x013f, 0x08, - 0x0b, 0x00, 0x00, 0x00, 0x29}, - {0x69, 0x06fd, 0x080b, 0x3b17, 0x0140, 0x08, - 0x0b, 0x00, 0x00, 0x00, 0x29}, - {0x6b, 0x07ff, 0x080b, 0x3b17, 0x0141, 0x10, - 0x0b, 0x00, 0x00, 0x00, 0x29}, - {0x6c, 0x067b, 0x090c, 0x3b37, 0x0000, 0x08, - 0x0c, 0x00, 0x00, 0x00, 0x2f}, - {0x6d, 0x06fd, 0x090c, 0x3b37, 0x0000, 0x10, - 0x0c, 0x00, 0x00, 0x00, 0x2f}, - {0x6e, 0x07ff, 0x090c, 0x3b37, 0x0000, 0x10, - 0x0c, 0x00, 0x00, 0x00, 0x2f}, - {0x70, 0x2a1b, 0x0410, 0x3b52, 0x0000, 0x08, - 0x10, 0x00, 0x00, 0x07, 0x34}, - {0x71, 0x0a1b, 0x0511, 0x3b63, 0x0000, 0x08, - 0x11, 0x00, 0x00, 0x00, 0x37}, - {0x74, 0x0a1d, 0x0511, 0x3b63, 0x0000, 0x08, - 0x11, 0x00, 0x00, 0x00, 0x37}, /* ModeIdIndex = 0x30 */ - {0x75, 0x0a3d, 0x0612, 0x3b74, 0x0000, 0x08, - 0x12, 0x00, 0x00, 0x00, 0x3a}, - {0x76, 0x2a1f, 0x0410, 0x3b52, 0x0000, 0x08, - 0x10, 0x00, 0x00, 0x07, 0x34}, - {0x77, 0x0a1f, 0x0511, 0x3b63, 0x0000, 0x08, - 0x11, 0x00, 0x00, 0x00, 0x37}, - {0x78, 0x0a3f, 0x0612, 0x3b74, 0x0000, 0x08, - 0x12, 0x00, 0x00, 0x00, 0x3a}, - {0x79, 0x0a3b, 0x0612, 0x3b74, 0x0000, 0x08, - 0x12, 0x00, 0x00, 0x00, 0x3a}, - {0x7a, 0x2a1d, 0x0410, 0x3b52, 0x0000, 0x08, - 0x10, 0x00, 0x00, 0x07, 0x34}, - {0x7b, 0x0e3b, 0x060f, 0x3ad0, 0x0000, 0x08, - 0x0f, 0x00, 0x00, 0x00, 0x1d}, - {0x7c, 0x0e7d, 0x060f, 0x3ad0, 0x0000, 0x08, - 0x0f, 0x00, 0x00, 0x00, 0x1d}, - {0x7d, 0x0eff, 0x060f, 0x3ad0, 0x0000, 0x08, - 0x0f, 0x00, 0x00, 0x00, 0x1d}, - {0x20, 0x0e3b, 0x0D16, 0x49e0, 0x0000, 0x08, - 0x16, 0x00, 0x00, 0x00, 0x43}, - {0x21, 0x0e7d, 0x0D16, 0x49e0, 0x0000, 0x08, - 0x16, 0x00, 0x00, 0x00, 0x43}, - {0x22, 0x0eff, 0x0D16, 0x49e0, 0x0000, 0x08, - 0x16, 0x00, 0x00, 0x00, 0x43}, - {0x23, 0x0e3b, 0x0614, 0x49d5, 0x0000, 0x08, - 0x14, 0x00, 0x00, 0x00, 0x41}, - {0x24, 0x0e7d, 0x0614, 0x49d5, 0x0000, 0x08, - 0x14, 0x00, 0x00, 0x00, 0x41}, - {0x25, 0x0eff, 0x0614, 0x49d5, 0x0000, 0x08, - 0x14, 0x00, 0x00, 0x00, 0x41}, - {0x26, 0x063b, 0x0c15, 0x49dc, 0x0000, 0x08, - 0x15, 0x00, 0x00, 0x00, 0x42}, /* ModeIdIndex = 0x40 */ - {0x27, 0x067d, 0x0c15, 0x49dc, 0x0000, 0x08, - 0x15, 0x00, 0x00, 0x00, 0x42}, - {0x28, 0x06ff, 0x0c15, 0x49dc, 0x0000, 0x08, - 0x15, 0x00, 0x00, 0x00, 0x42}, - {0xff, 0x0000, 0x0000, 0x0000, 0x0000, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00} -}; - -static struct SiS_StandTable_S XGI330_StandTable[] = { -/* MD_0_200 */ - { - 0x28, 0x18, 0x08, 0x0800, - {0x09, 0x03, 0x00, 0x02}, - 0x63, - {0x2d, 0x27, 0x28, 0x90, 0x2b, 0xa0, 0xbf, 0x1f, - 0x00, 0xc7, 0x06, 0x07, 0x00, 0x00, 0x00, 0x00, - 0x9c, 0x8e, 0x8f, 0x14, 0x1f, 0x96, 0xb9, 0xa3, - 0xff}, - {0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, - 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, - 0x08, 0x00, 0x0f, 0x00}, - {0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x0e, 0x00, - 0xff} - }, -/* MD_1_200 */ - { - 0x28, 0x18, 0x08, 0x0800, - {0x09, 0x03, 0x00, 0x02}, - 0x63, - {0x2d, 0x27, 0x28, 0x90, 0x2b, 0xa0, 0xbf, 0x1f, - 0x00, 0xc7, 0x06, 0x07, 0x00, 0x00, 0x00, 0x00, - 0x9c, 0x8e, 0x8f, 0x14, 0x1f, 0x96, 0xb9, 0xa3, - 0xff}, - {0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, - 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, - 0x08, 0x00, 0x0f, 0x00}, - {0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x0e, 0x00, - 0xff} - }, -/* MD_2_200 */ - { - 0x50, 0x18, 0x08, 0x1000, - {0x01, 0x03, 0x00, 0x02}, - 0x63, - {0x5f, 0x4f, 0x50, 0x82, 0x55, 0x81, 0xbf, 0x1f, - 0x00, 0xc7, 0x06, 0x07, 0x00, 0x00, 0x00, 0x00, - 0x9c, 0x8e, 0x8f, 0x28, 0x1f, 0x96, 0xb9, 0xa3, - 0xff}, - {0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, - 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, - 0x08, 0x00, 0x0f, 0x00}, - {0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x0e, 0x00, - 0xff} - }, -/* MD_3_200 */ - { - 0x50, 0x18, 0x08, 0x1000, - {0x01, 0x03, 0x00, 0x02}, - 0x63, - {0x5f, 0x4f, 0x50, 0x82, 0x55, 0x81, 0xbf, 0x1f, - 0x00, 0xc7, 0x06, 0x07, 0x00, 0x00, 0x00, 0x00, - 0x9c, 0x8e, 0x8f, 0x28, 0x1f, 0x96, 0xb9, 0xa3, - 0xff}, - {0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, - 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, - 0x08, 0x00, 0x0f, 0x00}, - {0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x0e, 0x00, - 0xff} - }, -/* MD_4 */ - { - 0x28, 0x18, 0x08, 0x4000, - {0x09, 0x03, 0x00, 0x02}, - 0x63, - {0x2d, 0x27, 0x28, 0x90, 0x2c, 0x80, 0xbf, 0x1f, - 0x00, 0xc1, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x9c, 0x8e, 0x8f, 0x14, 0x00, 0x96, 0xb9, 0xa2, - 0xff}, - {0x00, 0x13, 0x15, 0x17, 0x02, 0x04, 0x06, 0x07, - 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, - 0x01, 0x00, 0x03, 0x00}, - {0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x0f, 0x00, - 0xff} - }, -/* MD_5 */ - { - 0x28, 0x18, 0x08, 0x4000, - {0x09, 0x03, 0x00, 0x02}, - 0x63, - {0x2d, 0x27, 0x28, 0x90, 0x2c, 0x80, 0xbf, 0x1f, - 0x00, 0xc1, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x9c, 0x8e, 0x8f, 0x14, 0x00, 0x96, 0xb9, 0xa2, - 0xff}, - {0x00, 0x13, 0x15, 0x17, 0x02, 0x04, 0x06, 0x07, - 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, - 0x01, 0x00, 0x03, 0x00}, - {0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x0f, 0x00, - 0xff} - }, -/* MD_6 */ - { - 0x50, 0x18, 0x08, 0x4000, - {0x01, 0x01, 0x00, 0x06}, - 0x63, - {0x5f, 0x4f, 0x50, 0x82, 0x55, 0x81, 0xbf, 0x1f, - 0x00, 0xc1, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x9c, 0x8e, 0x8f, 0x28, 0x00, 0x96, 0xb9, 0xc2, - 0xff}, - {0x00, 0x17, 0x17, 0x17, 0x17, 0x17, 0x17, 0x17, - 0x17, 0x17, 0x17, 0x17, 0x17, 0x17, 0x17, 0x17, - 0x01, 0x00, 0x01, 0x00}, - {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0d, 0x00, - 0xff} - }, -/* MD_7 */ - { - 0x50, 0x18, 0x0e, 0x1000, - {0x00, 0x03, 0x00, 0x03}, - 0xa6, - {0x5f, 0x4f, 0x50, 0x82, 0x55, 0x81, 0xbf, 0x1f, - 0x00, 0x4d, 0x0b, 0x0c, 0x00, 0x00, 0x00, 0x00, - 0x83, 0x85, 0x5d, 0x28, 0x0d, 0x63, 0xba, 0xa3, - 0xff}, - {0x00, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, - 0x10, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, - 0x0e, 0x00, 0x0f, 0x08}, - {0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x0a, 0x00, - 0xff} - }, -/* MDA_DAC */ - { - 0x00, 0x00, 0x00, 0x0000, - {0x00, 0x00, 0x00, 0x15}, - 0x15, - {0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x15, - 0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x3f, 0x3f, - 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x00, 0x00, - 0x00}, - {0x00, 0x00, 0x00, 0x00, 0x00, 0x15, 0x15, 0x15, - 0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x15, - 0x15, 0x15, 0x15, 0x15}, - {0x15, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, - 0x3f} - }, -/* CGA_DAC */ - { - 0x00, 0x10, 0x04, 0x0114, - {0x11, 0x09, 0x15, 0x00}, - 0x10, - {0x04, 0x14, 0x01, 0x11, 0x09, 0x15, 0x2a, 0x3a, - 0x2e, 0x3e, 0x2b, 0x3b, 0x2f, 0x3f, 0x2a, 0x3a, - 0x2e, 0x3e, 0x2b, 0x3b, 0x2f, 0x3f, 0x00, 0x10, - 0x04}, - {0x14, 0x01, 0x11, 0x09, 0x15, 0x00, 0x10, 0x04, - 0x14, 0x01, 0x11, 0x09, 0x15, 0x2a, 0x3a, 0x2e, - 0x3e, 0x2b, 0x3b, 0x2f}, - {0x3f, 0x2a, 0x3a, 0x2e, 0x3e, 0x2b, 0x3b, 0x2f, - 0x3f} - }, -/* EGA_DAC */ - { - 0x00, 0x10, 0x04, 0x0114, - {0x11, 0x05, 0x15, 0x20}, - 0x30, - {0x24, 0x34, 0x21, 0x31, 0x25, 0x35, 0x08, 0x18, - 0x0c, 0x1c, 0x09, 0x19, 0x0d, 0x1d, 0x28, 0x38, - 0x2c, 0x3c, 0x29, 0x39, 0x2d, 0x3d, 0x02, 0x12, - 0x06}, - {0x16, 0x03, 0x13, 0x07, 0x17, 0x22, 0x32, 0x26, - 0x36, 0x23, 0x33, 0x27, 0x37, 0x0a, 0x1a, 0x0e, - 0x1e, 0x0b, 0x1b, 0x0f}, - {0x1f, 0x2a, 0x3a, 0x2e, 0x3e, 0x2b, 0x3b, 0x2f, - 0x3f} - }, -/* VGA_DAC */ - { - 0x00, 0x10, 0x04, 0x0114, - {0x11, 0x09, 0x15, 0x2a}, - 0x3a, - {0x2e, 0x3e, 0x2b, 0x3b, 0x2f, 0x3f, 0x00, 0x05, - 0x08, 0x0b, 0x0e, 0x11, 0x14, 0x18, 0x1c, 0x20, - 0x24, 0x28, 0x2d, 0x32, 0x38, 0x3f, 0x00, 0x10, - 0x1f}, - {0x2f, 0x3f, 0x1f, 0x27, 0x2f, 0x37, 0x3f, 0x2d, - 0x31, 0x36, 0x3a, 0x3f, 0x00, 0x07, 0x0e, 0x15, - 0x1c, 0x0e, 0x11, 0x15}, - {0x18, 0x1c, 0x14, 0x16, 0x18, 0x1a, 0x1c, 0x00, - 0x04} - }, - { - 0x08, 0x0c, 0x10, 0x0a08, - {0x0c, 0x0e, 0x10, 0x0b}, - 0x0c, - {0x0d, 0x0f, 0x10, 0x10, 0x01, 0x08, 0x00, 0x00, - 0x00, 0x00, 0x01, 0x00, 0x02, 0x02, 0x01, 0x00, - 0x04, 0x04, 0x01, 0x00, 0x05, 0x02, 0x05, 0x00, - 0x06}, - {0x01, 0x06, 0x05, 0x06, 0x00, 0x08, 0x01, 0x08, - 0x00, 0x07, 0x02, 0x07, 0x06, 0x07, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00}, - {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00} - }, -/* MD_D */ - { - 0x28, 0x18, 0x08, 0x2000, - {0x09, 0x0f, 0x00, 0x06}, - 0x63, - {0x2d, 0x27, 0x28, 0x90, 0x2c, 0x80, 0xbf, 0x1f, - 0x00, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x9c, 0x8e, 0x8f, 0x14, 0x00, 0x96, 0xb9, 0xe3, - 0xff}, - {0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, - 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, - 0x01, 0x00, 0x0f, 0x00}, - {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x05, 0x0f, - 0xff} - }, -/* MD_E */ - { - 0x50, 0x18, 0x08, 0x4000, - {0x01, 0x0f, 0x00, 0x06}, - 0x63, - {0x5f, 0x4f, 0x50, 0x82, 0x55, 0x81, 0xbf, 0x1f, - 0x00, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x9c, 0x8e, 0x8f, 0x28, 0x00, 0x96, 0xb9, 0xe3, - 0xff}, - {0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, - 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, - 0x01, 0x00, 0x0f, 0x00}, - {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x05, 0x0f, - 0xff} - }, + {0x68, 0x067b, 0x080b, 0x0b, 0x00, 0x29}, + {0x69, 0x06fd, 0x080b, 0x0b, 0x00, 0x29}, + {0x6b, 0x07ff, 0x080b, 0x0b, 0x00, 0x29}, + {0x6c, 0x067b, 0x090c, 0x0c, 0x00, 0x2f}, + {0x6d, 0x06fd, 0x090c, 0x0c, 0x00, 0x2f}, + {0x6e, 0x07ff, 0x090c, 0x0c, 0x00, 0x2f}, + {0x70, 0x2a1b, 0x0410, 0x10, 0x07, 0x34}, + {0x71, 0x0a1b, 0x0511, 0x11, 0x00, 0x37}, + {0x74, 0x0a1d, 0x0511, 0x11, 0x00, 0x37}, + {0x75, 0x0a3d, 0x0612, 0x12, 0x00, 0x3a}, + {0x76, 0x2a1f, 0x0410, 0x10, 0x07, 0x34}, + {0x77, 0x0a1f, 0x0511, 0x11, 0x00, 0x37}, + {0x78, 0x0a3f, 0x0612, 0x12, 0x00, 0x3a}, + {0x79, 0x0a3b, 0x0612, 0x12, 0x00, 0x3a}, + {0x7a, 0x2a1d, 0x0410, 0x10, 0x07, 0x34}, + {0x7b, 0x0e3b, 0x060f, 0x0f, 0x00, 0x1d}, + {0x7c, 0x0e7d, 0x060f, 0x0f, 0x00, 0x1d}, + {0x7d, 0x0eff, 0x060f, 0x0f, 0x00, 0x1d}, + {0x20, 0x0e3b, 0x0D16, 0x16, 0x00, 0x43}, + {0x21, 0x0e7d, 0x0D16, 0x16, 0x00, 0x43}, + {0x22, 0x0eff, 0x0D16, 0x16, 0x00, 0x43}, + {0x23, 0x0e3b, 0x0614, 0x14, 0x00, 0x41}, + {0x24, 0x0e7d, 0x0614, 0x14, 0x00, 0x41}, + {0x25, 0x0eff, 0x0614, 0x14, 0x00, 0x41}, + {0x26, 0x063b, 0x0c15, 0x15, 0x00, 0x42}, + {0x27, 0x067d, 0x0c15, 0x15, 0x00, 0x42}, + {0x28, 0x06ff, 0x0c15, 0x15, 0x00, 0x42}, + {0xff, 0x0000, 0x0000, 0x00, 0x00, 0x00} +}; + +static struct SiS_StandTable_S XGI330_StandTable = { /* ExtVGATable */ - { - 0x00, 0x00, 0x00, 0x0000, - {0x01, 0x0f, 0x00, 0x0e}, - 0x23, - {0x5f, 0x4f, 0x50, 0x82, 0x54, 0x80, 0x0b, 0x3e, - 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0xea, 0x8c, 0xdf, 0x28, 0x40, 0xe7, 0x04, 0xa3, - 0xff}, - {0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, - 0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, - 0x01, 0x00, 0x00, 0x00}, - {0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0f, - 0xff} - }, -/* ROM_SAVEPTR */ - { - 0x9f, 0x3b, 0x00, 0x00c0, - {0x00, 0x00, 0x00, 0x00}, - 0x00, - {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xbb, 0x3f, - 0x00, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x1a, 0x00, 0xac, 0x3e, 0x00, 0xc0, - 0x00}, - {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00}, - {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00} - }, -/* MD_F */ - { - 0x50, 0x18, 0x0e, 0x8000, - {0x01, 0x0f, 0x00, 0x06}, - 0xa2, - {0x5f, 0x4f, 0x50, 0x82, 0x55, 0x81, 0xbf, 0x1f, - 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x82, 0x84, 0x5d, 0x28, 0x0f, 0x63, 0xba, 0xe3, - 0xff}, - {0x00, 0x08, 0x00, 0x00, 0x18, 0x18, 0x00, 0x00, - 0x00, 0x08, 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, - 0x0b, 0x00, 0x05, 0x00}, - {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x05, 0x05, - 0xff} - }, -/* MD_10 */ - { - 0x50, 0x18, 0x0e, 0x8000, - {0x01, 0x0f, 0x00, 0x06}, - 0xa3, - {0x5f, 0x4f, 0x50, 0x82, 0x55, 0x81, 0xbf, 0x1f, - 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x82, 0x84, 0x5d, 0x28, 0x0f, 0x63, 0xba, 0xe3, - 0xff}, - {0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x14, 0x07, - 0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f, - 0x01, 0x00, 0x0f, 0x00}, - {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x05, 0x0f, - 0xff} - }, -/* MD_0_350 */ - { - 0x28, 0x18, 0x0e, 0x0800, - {0x09, 0x03, 0x00, 0x02}, - 0xa3, - {0x2d, 0x27, 0x28, 0x90, 0x2b, 0xb1, 0xbf, 0x1f, - 0x00, 0x4d, 0x0b, 0x0c, 0x00, 0x00, 0x00, 0x00, - 0x83, 0x85, 0x5d, 0x14, 0x1f, 0x63, 0xba, 0xa3, - 0xff}, - {0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x14, 0x07, - 0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f, - 0x08, 0x00, 0x0f, 0x00}, - {0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x0e, 0x00, - 0xff} - }, -/* MD_1_350 */ - { - 0x28, 0x18, 0x0e, 0x0800, - {0x09, 0x03, 0x00, 0x02}, - 0xa3, - {0x2d, 0x27, 0x28, 0x90, 0x2b, 0xa0, 0xbf, 0x1f, - 0x00, 0x4d, 0x0b, 0x0c, 0x00, 0x00, 0x00, 0x00, - 0x83, 0x85, 0x5d, 0x14, 0x1f, 0x63, 0xba, 0xa3, - 0xff}, - {0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x14, 0x07, - 0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f, - 0x08, 0x00, 0x0f, 0x00}, - {0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x0e, 0x00, - 0xff} - }, -/* MD_2_350 */ - { - 0x50, 0x18, 0x0e, 0x1000, - {0x01, 0x03, 0x00, 0x02}, - 0xa3, - {0x5f, 0x4f, 0x50, 0x82, 0x55, 0x81, 0xbf, 0x1f, - 0x00, 0x4d, 0x0b, 0x0c, 0x00, 0x00, 0x00, 0x00, - 0x83, 0x85, 0x5d, 0x28, 0x1f, 0x63, 0xba, 0xa3, - 0xff}, - {0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x14, 0x07, - 0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f, - 0x08, 0x00, 0x0f, 0x00}, - {0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x0e, 0x00, - 0xff} - }, -/* MD_3_350 */ - { - 0x50, 0x18, 0x0e, 0x1000, - {0x01, 0x03, 0x00, 0x02}, - 0xa3, - {0x5f, 0x4f, 0x50, 0x82, 0x55, 0x81, 0xbf, 0x1f, - 0x00, 0x4d, 0x0b, 0x0c, 0x00, 0x00, 0x00, 0x00, - 0x83, 0x85, 0x5d, 0x28, 0x1f, 0x63, 0xba, 0xa3, - 0xff}, - {0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x14, 0x07, - 0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f, - 0x08, 0x00, 0x0f, 0x00}, - {0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x0e, 0x00, - 0xff} - }, -/* MD_0_1_400 */ - { - 0x28, 0x18, 0x10, 0x0800, - {0x08, 0x03, 0x00, 0x02}, - 0x67, - {0x2d, 0x27, 0x28, 0x90, 0x2b, 0xb1, 0xbf, 0x1f, - 0x00, 0x4f, 0x0d, 0x0e, 0x00, 0x00, 0x00, 0x00, - 0x9c, 0x8e, 0x8f, 0x14, 0x1f, 0x96, 0xb9, 0xa3, - 0xff}, - {0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x14, 0x07, - 0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f, - 0x0c, 0x00, 0x0f, 0x08}, - {0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x0e, 0x00, - 0xff} - }, -/* MD_2_3_400 */ - { - 0x50, 0x18, 0x10, 0x1000, - {0x00, 0x03, 0x00, 0x02}, - 0x67, - {0x5f, 0x4f, 0x50, 0x82, 0x55, 0x81, 0xbf, 0x1f, - 0x00, 0x4f, 0x0d, 0x0e, 0x00, 0x00, 0x00, 0x00, - 0x9c, 0x8e, 0x8f, 0x28, 0x1f, 0x96, 0xb9, 0xa3, - 0xff}, - {0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x14, 0x07, - 0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f, - 0x0c, 0x00, 0x0f, 0x08}, - {0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x0e, 0x00, - 0xff} - }, -/* MD_7_400 */ - { - 0x50, 0x18, 0x10, 0x1000, - {0x00, 0x03, 0x00, 0x02}, - 0x66, - {0x5f, 0x4f, 0x50, 0x82, 0x55, 0x81, 0xbf, 0x1f, - 0x00, 0x4f, 0x0d, 0x0e, 0x00, 0x00, 0x00, 0x00, - 0x9c, 0x8e, 0x8f, 0x28, 0x0f, 0x96, 0xb9, 0xa3, - 0xff}, - {0x00, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, - 0x10, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, - 0x0e, 0x00, 0x0f, 0x08}, - {0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x0a, 0x00, - 0xff} - }, -/* MD_11 */ - { - 0x50, 0x1d, 0x10, 0xa000, - {0x01, 0x0f, 0x00, 0x06}, - 0xe3, - {0x5f, 0x4f, 0x50, 0x82, 0x55, 0x81, 0x0b, 0x3e, - 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0xe9, 0x8b, 0xdf, 0x28, 0x00, 0xe7, 0x04, 0xc3, - 0xff}, - {0x00, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, - 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, - 0x01, 0x00, 0x0f, 0x00}, - {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x05, 0x01, - 0xff} - }, -/* ExtEGATable */ - { - 0x50, 0x1d, 0x10, 0xa000, - {0x01, 0x0f, 0x00, 0x06}, - 0xe3, - {0x5f, 0x4f, 0x50, 0x82, 0x55, 0x81, 0x0b, 0x3e, - 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0xe9, 0x8b, 0xdf, 0x28, 0x00, 0xe7, 0x04, 0xe3, - 0xff}, - {0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x14, 0x07, - 0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f, - 0x01, 0x00, 0x0f, 0x00}, - {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x05, 0x0f, - 0xff} - }, -/* MD_13 */ - { - 0x28, 0x18, 0x08, 0x2000, - {0x01, 0x0f, 0x00, 0x0e}, - 0x63, - {0x5f, 0x4f, 0x50, 0x82, 0x55, 0x81, 0xbf, 0x1f, - 0x00, 0x41, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x9c, 0x8e, 0x8f, 0x28, 0x40, 0x96, 0xb9, 0xa3, - 0xff}, - {0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, - 0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, - 0x41, 0x00, 0x0f, 0x00}, - {0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0f, - 0xff} - } + 0x00, 0x00, 0x00, 0x0000, + {0x01, 0x0f, 0x00, 0x0e}, + 0x23, + {0x5f, 0x4f, 0x50, 0x82, 0x54, 0x80, 0x0b, 0x3e, + 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0xea, 0x8c, 0xdf, 0x28, 0x40, 0xe7, 0x04, 0xa3, + 0xff}, + {0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, + 0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, + 0x01, 0x00, 0x00, 0x00}, + {0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0f, + 0xff} }; static struct XGI_TimingHStruct XGI_TimingH[1]; @@ -1143,7 +626,7 @@ static struct XGI330_LCDDataStruct XGI_NoScalingDatax75[] = { {1, 1, 1688, 806, 1688, 806} /* ; 0A (1280x768x75Hz) */ }; -static struct XGI330_LCDDataDesStruct XGI_ExtLCDDes1024x768Data[] = { +static struct XGI_LCDDesStruct XGI_ExtLCDDes1024x768Data[] = { {9, 1057, 0, 771}, /* ; 00 (320x200,320x400,640x200,640x400) */ {9, 1057, 0, 771}, /* ; 01 (320x350,640x350) */ {9, 1057, 0, 771}, /* ; 02 (360x400,720x400) */ @@ -1153,7 +636,7 @@ static struct XGI330_LCDDataDesStruct XGI_ExtLCDDes1024x768Data[] = { {9, 1057, 805, 770} /* ; 06 (1024x768x60Hz) */ }; -static struct XGI330_LCDDataDesStruct XGI_StLCDDes1024x768Data[] = { +static struct XGI_LCDDesStruct XGI_StLCDDes1024x768Data[] = { {9, 1057, 737, 703}, /* ; 00 (320x200,320x400,640x200,640x400) */ {9, 1057, 686, 651}, /* ; 01 (320x350,640x350) */ {9, 1057, 737, 703}, /* ; 02 (360x400,720x400) */ @@ -1163,7 +646,7 @@ static struct XGI330_LCDDataDesStruct XGI_StLCDDes1024x768Data[] = { {9, 1057, 805, 770} /* ; 06 (1024x768x60Hz) */ }; -static struct XGI330_LCDDataDesStruct XGI_CetLCDDes1024x768Data[] = { +static struct XGI_LCDDesStruct XGI_CetLCDDes1024x768Data[] = { {1152, 856, 622, 587}, /* ; 00 (320x200,320x400,640x200,640x400) */ {1152, 856, 597, 562}, /* ; 01 (320x350,640x350) */ {1152, 856, 622, 587}, /* ; 02 (360x400,720x400) */ @@ -1173,7 +656,7 @@ static struct XGI330_LCDDataDesStruct XGI_CetLCDDes1024x768Data[] = { {0, 1048, 805, 770} /* ; 06 (1024x768x60Hz) */ }; -static struct XGI330_LCDDataDesStruct XGI_ExtLCDDLDes1280x1024Data[] = { +static struct XGI_LCDDesStruct XGI_ExtLCDDLDes1280x1024Data[] = { {18, 1346, 981, 940}, /* 00 (320x200,320x400,640x200,640x400) */ {18, 1346, 926, 865}, /* 01 (320x350,640x350) */ {18, 1346, 981, 940}, /* 02 (360x400,720x400) */ @@ -1184,7 +667,7 @@ static struct XGI330_LCDDataDesStruct XGI_ExtLCDDLDes1280x1024Data[] = { {18, 1346, 1065, 1024} /* 07 (1280x1024x60Hz) */ }; -static struct XGI330_LCDDataDesStruct XGI_StLCDDLDes1280x1024Data[] = { +static struct XGI_LCDDesStruct XGI_StLCDDLDes1280x1024Data[] = { {18, 1346, 970, 907}, /* 00 (320x200,320x400,640x200,640x400) */ {18, 1346, 917, 854}, /* 01 (320x350,640x350) */ {18, 1346, 970, 907}, /* 02 (360x400,720x400) */ @@ -1195,7 +678,7 @@ static struct XGI330_LCDDataDesStruct XGI_StLCDDLDes1280x1024Data[] = { {18, 1346, 1065, 1024} /* 07 (1280x1024x60Hz) */ }; -static struct XGI330_LCDDataDesStruct XGI_CetLCDDLDes1280x1024Data[] = { +static struct XGI_LCDDesStruct XGI_CetLCDDLDes1280x1024Data[] = { {1368, 1008, 752, 711}, /* 00 (320x200,320x400,640x200,640x400) */ {1368, 1008, 729, 688}, /* 01 (320x350,640x350) */ {1368, 1008, 752, 711}, /* 02 (360x400,720x400) */ @@ -1206,7 +689,7 @@ static struct XGI330_LCDDataDesStruct XGI_CetLCDDLDes1280x1024Data[] = { {18, 1346, 1065, 1024} /* 07 (1280x1024x60Hz) */ }; -static struct XGI330_LCDDataDesStruct XGI_ExtLCDDes1280x1024Data[] = { +static struct XGI_LCDDesStruct XGI_ExtLCDDes1280x1024Data[] = { {9, 1337, 981, 940}, /* ; 00 (320x200,320x400,640x200,640x400) */ {9, 1337, 926, 884}, /* ; 01 (320x350,640x350) alan, 2003/09/30 */ {9, 1337, 981, 940}, /* ; 02 (360x400,720x400) */ @@ -1217,7 +700,7 @@ static struct XGI330_LCDDataDesStruct XGI_ExtLCDDes1280x1024Data[] = { {9, 1337, 1065, 1024} /* ; 07 (1280x1024x60Hz) */ }; -static struct XGI330_LCDDataDesStruct XGI_StLCDDes1280x1024Data[] = { +static struct XGI_LCDDesStruct XGI_StLCDDes1280x1024Data[] = { {9, 1337, 970, 907}, /* ; 00 (320x200,320x400,640x200,640x400) */ {9, 1337, 917, 854}, /* ; 01 (320x350,640x350) */ {9, 1337, 970, 907}, /* ; 02 (360x400,720x400) */ @@ -1228,7 +711,7 @@ static struct XGI330_LCDDataDesStruct XGI_StLCDDes1280x1024Data[] = { {9, 1337, 1065, 1024} /* ; 07 (1280x1024x60Hz) */ }; -static struct XGI330_LCDDataDesStruct XGI_CetLCDDes1280x1024Data[] = { +static struct XGI_LCDDesStruct XGI_CetLCDDes1280x1024Data[] = { {1368, 1008, 752, 711}, /* 00 (320x200,320x400,640x200,640x400) */ {1368, 1008, 729, 688}, /* 01 (320x350,640x350) */ {1368, 1008, 752, 711}, /* 02 (360x400,720x400) */ @@ -1239,7 +722,7 @@ static struct XGI330_LCDDataDesStruct XGI_CetLCDDes1280x1024Data[] = { {9, 1337, 1065, 1024} /* 07 (1280x1024x60Hz) */ }; -static struct XGI330_LCDDataDesStruct xgifb_lcddldes_1400x1050[] = { +static struct XGI_LCDDesStruct xgifb_lcddldes_1400x1050[] = { {18, 1464, 0, 1051}, /* 00 (320x200,320x400,640x200,640x400) */ {18, 1464, 0, 1051}, /* 01 (320x350,640x350) */ {18, 1464, 0, 1051}, /* 02 (360x400,720x400) */ @@ -1251,7 +734,7 @@ static struct XGI330_LCDDataDesStruct xgifb_lcddldes_1400x1050[] = { {18, 1464, 0, 1051} /* 08 (1400x1050x60Hz) */ }; -static struct XGI330_LCDDataDesStruct xgifb_lcddes_1400x1050[] = { +static struct XGI_LCDDesStruct xgifb_lcddes_1400x1050[] = { {9, 1455, 0, 1051}, /* 00 (320x200,320x400,640x200,640x400) */ {9, 1455, 0, 1051}, /* 01 (320x350,640x350) */ {9, 1455, 0, 1051}, /* 02 (360x400,720x400) */ @@ -1263,7 +746,7 @@ static struct XGI330_LCDDataDesStruct xgifb_lcddes_1400x1050[] = { {9, 1455, 0, 1051} /* 08 (1400x1050x60Hz) */ }; -static struct XGI330_LCDDataDesStruct XGI_CetLCDDes1400x1050Data[] = { +static struct XGI_LCDDesStruct XGI_CetLCDDes1400x1050Data[] = { {1308, 1068, 781, 766}, /* 00 (320x200,320x400,640x200,640x400) */ {1308, 1068, 781, 766}, /* 01 (320x350,640x350) */ {1308, 1068, 781, 766}, /* 02 (360x400,720x400) */ @@ -1275,7 +758,7 @@ static struct XGI330_LCDDataDesStruct XGI_CetLCDDes1400x1050Data[] = { {18, 1464, 0, 1051} /* 08 (1400x1050x60Hz) */ }; -static struct XGI330_LCDDataDesStruct XGI_CetLCDDes1400x1050Data2[] = { +static struct XGI_LCDDesStruct XGI_CetLCDDes1400x1050Data2[] = { {0, 1448, 0, 1051}, /* 00 (320x200,320x400,640x200,640x400) */ {0, 1448, 0, 1051}, /* 01 (320x350,640x350) */ {0, 1448, 0, 1051}, /* 02 (360x400,720x400) */ @@ -1283,7 +766,7 @@ static struct XGI330_LCDDataDesStruct XGI_CetLCDDes1400x1050Data2[] = { {0, 1448, 0, 1051} /* 04 (640x480x60Hz) */ }; -static struct XGI330_LCDDataDesStruct XGI_ExtLCDDLDes1600x1200Data[] = { +static struct XGI_LCDDesStruct XGI_ExtLCDDLDes1600x1200Data[] = { {18, 1682, 0, 1201}, /* 00 (320x200,320x400,640x200,640x400) */ {18, 1682, 0, 1201}, /* 01 (320x350,640x350) */ {18, 1682, 0, 1201}, /* 02 (360x400,720x400) */ @@ -1296,7 +779,7 @@ static struct XGI330_LCDDataDesStruct XGI_ExtLCDDLDes1600x1200Data[] = { {18, 1682, 0, 1201} /* 09 (1600x1200x60Hz) */ }; -static struct XGI330_LCDDataDesStruct XGI_StLCDDLDes1600x1200Data[] = { +static struct XGI_LCDDesStruct XGI_StLCDDLDes1600x1200Data[] = { {18, 1682, 1150, 1101}, /* 00 (320x200,320x400,640x200,640x400) */ {18, 1682, 1083, 1034}, /* 01 (320x350,640x350) */ {18, 1682, 1150, 1101}, /* 02 (360x400,720x400) */ @@ -1309,7 +792,7 @@ static struct XGI330_LCDDataDesStruct XGI_StLCDDLDes1600x1200Data[] = { {18, 1682, 0, 1201} /* 09 (1600x1200x60Hz) */ }; -static struct XGI330_LCDDataDesStruct XGI_ExtLCDDes1600x1200Data[] = { +static struct XGI_LCDDesStruct XGI_ExtLCDDes1600x1200Data[] = { {9, 1673, 0, 1201}, /* 00 (320x200,320x400,640x200,640x400) */ {9, 1673, 0, 1201}, /* 01 (320x350,640x350) */ {9, 1673, 0, 1201}, /* 02 (360x400,720x400) */ @@ -1322,7 +805,7 @@ static struct XGI330_LCDDataDesStruct XGI_ExtLCDDes1600x1200Data[] = { {9, 1673, 0, 1201} /* 09 (1600x1200x60Hz) */ }; -static struct XGI330_LCDDataDesStruct XGI_StLCDDes1600x1200Data[] = { +static struct XGI_LCDDesStruct XGI_StLCDDes1600x1200Data[] = { {9, 1673, 1150, 1101}, /* 00 (320x200,320x400,640x200,640x400) */ {9, 1673, 1083, 1034}, /* 01 (320x350,640x350) */ {9, 1673, 1150, 1101}, /* 02 (360x400,720x400) */ @@ -1352,7 +835,7 @@ static struct XGI330_LCDDataDesStruct2 XGI_NoScalingDesData[] = { }; /* ;;1024x768x75Hz */ -static struct XGI330_LCDDataDesStruct xgifb_lcddes_1024x768x75[] = { +static struct XGI_LCDDesStruct xgifb_lcddes_1024x768x75[] = { {9, 1049, 0, 769}, /* ; 00 (320x200,320x400,640x200,640x400) */ {9, 1049, 0, 769}, /* ; 01 (320x350,640x350) */ {9, 1049, 0, 769}, /* ; 02 (360x400,720x400) */ @@ -1363,7 +846,7 @@ static struct XGI330_LCDDataDesStruct xgifb_lcddes_1024x768x75[] = { }; /* ;;1024x768x75Hz */ -static struct XGI330_LCDDataDesStruct XGI_CetLCDDes1024x768x75Data[] = { +static struct XGI_LCDDesStruct XGI_CetLCDDes1024x768x75Data[] = { {1152, 856, 622, 587}, /* ; 00 (320x200,320x400,640x200,640x400) */ {1152, 856, 597, 562}, /* ; 01 (320x350,640x350) */ {1192, 896, 622, 587}, /* ; 02 (360x400,720x400) */ @@ -1374,7 +857,7 @@ static struct XGI330_LCDDataDesStruct XGI_CetLCDDes1024x768x75Data[] = { }; /* ;;1280x1024x75Hz */ -static struct XGI330_LCDDataDesStruct xgifb_lcddldes_1280x1024x75[] = { +static struct XGI_LCDDesStruct xgifb_lcddldes_1280x1024x75[] = { {18, 1314, 0, 1025}, /* ; 00 (320x200,320x400,640x200,640x400) */ {18, 1314, 0, 1025}, /* ; 01 (320x350,640x350) */ {18, 1314, 0, 1025}, /* ; 02 (360x400,720x400) */ @@ -1386,7 +869,7 @@ static struct XGI330_LCDDataDesStruct xgifb_lcddldes_1280x1024x75[] = { }; /* 1280x1024x75Hz */ -static struct XGI330_LCDDataDesStruct XGI_CetLCDDLDes1280x1024x75Data[] = { +static struct XGI_LCDDesStruct XGI_CetLCDDLDes1280x1024x75Data[] = { {1368, 1008, 752, 711}, /* ; 00 (320x200,320x400,640x200,640x400) */ {1368, 1008, 729, 688}, /* ; 01 (320x350,640x350) */ {1408, 1048, 752, 711}, /* ; 02 (360x400,720x400) */ @@ -1398,7 +881,7 @@ static struct XGI330_LCDDataDesStruct XGI_CetLCDDLDes1280x1024x75Data[] = { }; /* ;;1280x1024x75Hz */ -static struct XGI330_LCDDataDesStruct xgifb_lcddes_1280x1024x75[] = { +static struct XGI_LCDDesStruct xgifb_lcddes_1280x1024x75[] = { {9, 1305, 0, 1025}, /* ; 00 (320x200,320x400,640x200,640x400) */ {9, 1305, 0, 1025}, /* ; 01 (320x350,640x350) */ {9, 1305, 0, 1025}, /* ; 02 (360x400,720x400) */ @@ -1410,7 +893,7 @@ static struct XGI330_LCDDataDesStruct xgifb_lcddes_1280x1024x75[] = { }; /* 1280x1024x75Hz */ -static struct XGI330_LCDDataDesStruct XGI_CetLCDDes1280x1024x75Data[] = { +static struct XGI_LCDDesStruct XGI_CetLCDDes1280x1024x75Data[] = { {1368, 1008, 752, 711}, /* ; 00 (320x200,320x400,640x200,640x400) */ {1368, 1008, 729, 688}, /* ; 01 (320x350,640x350) */ {1408, 1048, 752, 711}, /* ; 02 (360x400,720x400) */ diff --git a/drivers/staging/xgifb/vgatypes.h b/drivers/staging/xgifb/vgatypes.h index a7208e31581..30cdd1af81f 100644 --- a/drivers/staging/xgifb/vgatypes.h +++ b/drivers/staging/xgifb/vgatypes.h @@ -66,8 +66,6 @@ struct xgi_hw_device_info { unsigned long ulVideoMemorySize; /* size, in bytes, of the memory on the board */ - unsigned char *pjIOAddress; /* base I/O address of VGA ports (0x3B0) */ - unsigned char jChipType; /* Used to Identify Graphics Chip */ /* defined in the data structure type */ /* "XGI_CHIP_TYPE" */ diff --git a/drivers/staging/zsmalloc/zsmalloc-main.c b/drivers/staging/zsmalloc/zsmalloc-main.c index 917461c6601..504b6c2db22 100644 --- a/drivers/staging/zsmalloc/zsmalloc-main.c +++ b/drivers/staging/zsmalloc/zsmalloc-main.c @@ -45,12 +45,12 @@ static DEFINE_PER_CPU(struct mapping_area, zs_map_area); static int is_first_page(struct page *page) { - return test_bit(PG_private, &page->flags); + return PagePrivate(page); } static int is_last_page(struct page *page) { - return test_bit(PG_private_2, &page->flags); + return PagePrivate2(page); } static void get_zspage_mapping(struct page *page, unsigned int *class_idx, @@ -377,7 +377,7 @@ static struct page *alloc_zspage(struct size_class *class, gfp_t flags) INIT_LIST_HEAD(&page->lru); if (i == 0) { /* first page */ - set_bit(PG_private, &page->flags); + SetPagePrivate(page); set_page_private(page, 0); first_page = page; first_page->inuse = 0; @@ -389,8 +389,7 @@ static struct page *alloc_zspage(struct size_class *class, gfp_t flags) if (i >= 2) list_add(&page->lru, &prev_page->lru); if (i == class->zspage_order - 1) /* last page */ - set_bit(PG_private_2, &page->flags); - + SetPagePrivate2(page); prev_page = page; } diff --git a/drivers/staging/vme/Kconfig b/drivers/vme/Kconfig index 6411ae51ed3..c5c22465a80 100644 --- a/drivers/staging/vme/Kconfig +++ b/drivers/vme/Kconfig @@ -10,10 +10,10 @@ menuconfig VME_BUS if VME_BUS -source "drivers/staging/vme/bridges/Kconfig" +source "drivers/vme/bridges/Kconfig" -source "drivers/staging/vme/devices/Kconfig" +source "drivers/vme/boards/Kconfig" -source "drivers/staging/vme/boards/Kconfig" +source "drivers/staging/vme/devices/Kconfig" endif # VME diff --git a/drivers/vme/Makefile b/drivers/vme/Makefile new file mode 100644 index 00000000000..d7bfcb9fd5a --- /dev/null +++ b/drivers/vme/Makefile @@ -0,0 +1,7 @@ +# +# Makefile for the VME bridge device drivers. +# +obj-$(CONFIG_VME_BUS) += vme.o + +obj-y += bridges/ +obj-y += boards/ diff --git a/drivers/staging/vme/boards/Kconfig b/drivers/vme/boards/Kconfig index 76163135352..76163135352 100644 --- a/drivers/staging/vme/boards/Kconfig +++ b/drivers/vme/boards/Kconfig diff --git a/drivers/staging/vme/boards/Makefile b/drivers/vme/boards/Makefile index 43658340885..43658340885 100644 --- a/drivers/staging/vme/boards/Makefile +++ b/drivers/vme/boards/Makefile diff --git a/drivers/staging/vme/boards/vme_vmivme7805.c b/drivers/vme/boards/vme_vmivme7805.c index 8e05bb4e135..8e05bb4e135 100644 --- a/drivers/staging/vme/boards/vme_vmivme7805.c +++ b/drivers/vme/boards/vme_vmivme7805.c diff --git a/drivers/staging/vme/boards/vme_vmivme7805.h b/drivers/vme/boards/vme_vmivme7805.h index 44c2c449808..44c2c449808 100644 --- a/drivers/staging/vme/boards/vme_vmivme7805.h +++ b/drivers/vme/boards/vme_vmivme7805.h diff --git a/drivers/staging/vme/bridges/Kconfig b/drivers/vme/bridges/Kconfig index 9331064e047..9331064e047 100644 --- a/drivers/staging/vme/bridges/Kconfig +++ b/drivers/vme/bridges/Kconfig diff --git a/drivers/staging/vme/bridges/Makefile b/drivers/vme/bridges/Makefile index 59638afcd50..59638afcd50 100644 --- a/drivers/staging/vme/bridges/Makefile +++ b/drivers/vme/bridges/Makefile diff --git a/drivers/staging/vme/bridges/vme_ca91cx42.c b/drivers/vme/bridges/vme_ca91cx42.c index 515b8b8e32a..a3c0f84e2fa 100644 --- a/drivers/staging/vme/bridges/vme_ca91cx42.c +++ b/drivers/vme/bridges/vme_ca91cx42.c @@ -29,8 +29,8 @@ #include <linux/time.h> #include <linux/io.h> #include <linux/uaccess.h> +#include <linux/vme.h> -#include "../vme.h" #include "../vme_bridge.h" #include "vme_ca91cx42.h" diff --git a/drivers/staging/vme/bridges/vme_ca91cx42.h b/drivers/vme/bridges/vme_ca91cx42.h index 02a7c794db0..02a7c794db0 100644 --- a/drivers/staging/vme/bridges/vme_ca91cx42.h +++ b/drivers/vme/bridges/vme_ca91cx42.h diff --git a/drivers/staging/vme/bridges/vme_tsi148.c b/drivers/vme/bridges/vme_tsi148.c index f50582169b2..081e9c4c5e7 100644 --- a/drivers/staging/vme/bridges/vme_tsi148.c +++ b/drivers/vme/bridges/vme_tsi148.c @@ -29,8 +29,9 @@ #include <linux/time.h> #include <linux/io.h> #include <linux/uaccess.h> +#include <linux/byteorder/generic.h> +#include <linux/vme.h> -#include "../vme.h" #include "../vme_bridge.h" #include "vme_tsi148.h" @@ -1415,51 +1416,55 @@ static unsigned int tsi148_master_rmw(struct vme_master_resource *image, return result; } -static int tsi148_dma_set_vme_src_attributes(struct device *dev, u32 *attr, +static int tsi148_dma_set_vme_src_attributes(struct device *dev, __be32 *attr, u32 aspace, u32 cycle, u32 dwidth) { + u32 val; + + val = be32_to_cpu(*attr); + /* Setup 2eSST speeds */ switch (cycle & (VME_2eSST160 | VME_2eSST267 | VME_2eSST320)) { case VME_2eSST160: - *attr |= TSI148_LCSR_DSAT_2eSSTM_160; + val |= TSI148_LCSR_DSAT_2eSSTM_160; break; case VME_2eSST267: - *attr |= TSI148_LCSR_DSAT_2eSSTM_267; + val |= TSI148_LCSR_DSAT_2eSSTM_267; break; case VME_2eSST320: - *attr |= TSI148_LCSR_DSAT_2eSSTM_320; + val |= TSI148_LCSR_DSAT_2eSSTM_320; break; } /* Setup cycle types */ if (cycle & VME_SCT) - *attr |= TSI148_LCSR_DSAT_TM_SCT; + val |= TSI148_LCSR_DSAT_TM_SCT; if (cycle & VME_BLT) - *attr |= TSI148_LCSR_DSAT_TM_BLT; + val |= TSI148_LCSR_DSAT_TM_BLT; if (cycle & VME_MBLT) - *attr |= TSI148_LCSR_DSAT_TM_MBLT; + val |= TSI148_LCSR_DSAT_TM_MBLT; if (cycle & VME_2eVME) - *attr |= TSI148_LCSR_DSAT_TM_2eVME; + val |= TSI148_LCSR_DSAT_TM_2eVME; if (cycle & VME_2eSST) - *attr |= TSI148_LCSR_DSAT_TM_2eSST; + val |= TSI148_LCSR_DSAT_TM_2eSST; if (cycle & VME_2eSSTB) { dev_err(dev, "Currently not setting Broadcast Select " "Registers\n"); - *attr |= TSI148_LCSR_DSAT_TM_2eSSTB; + val |= TSI148_LCSR_DSAT_TM_2eSSTB; } /* Setup data width */ switch (dwidth) { case VME_D16: - *attr |= TSI148_LCSR_DSAT_DBW_16; + val |= TSI148_LCSR_DSAT_DBW_16; break; case VME_D32: - *attr |= TSI148_LCSR_DSAT_DBW_32; + val |= TSI148_LCSR_DSAT_DBW_32; break; default: dev_err(dev, "Invalid data width\n"); @@ -1469,31 +1474,31 @@ static int tsi148_dma_set_vme_src_attributes(struct device *dev, u32 *attr, /* Setup address space */ switch (aspace) { case VME_A16: - *attr |= TSI148_LCSR_DSAT_AMODE_A16; + val |= TSI148_LCSR_DSAT_AMODE_A16; break; case VME_A24: - *attr |= TSI148_LCSR_DSAT_AMODE_A24; + val |= TSI148_LCSR_DSAT_AMODE_A24; break; case VME_A32: - *attr |= TSI148_LCSR_DSAT_AMODE_A32; + val |= TSI148_LCSR_DSAT_AMODE_A32; break; case VME_A64: - *attr |= TSI148_LCSR_DSAT_AMODE_A64; + val |= TSI148_LCSR_DSAT_AMODE_A64; break; case VME_CRCSR: - *attr |= TSI148_LCSR_DSAT_AMODE_CRCSR; + val |= TSI148_LCSR_DSAT_AMODE_CRCSR; break; case VME_USER1: - *attr |= TSI148_LCSR_DSAT_AMODE_USER1; + val |= TSI148_LCSR_DSAT_AMODE_USER1; break; case VME_USER2: - *attr |= TSI148_LCSR_DSAT_AMODE_USER2; + val |= TSI148_LCSR_DSAT_AMODE_USER2; break; case VME_USER3: - *attr |= TSI148_LCSR_DSAT_AMODE_USER3; + val |= TSI148_LCSR_DSAT_AMODE_USER3; break; case VME_USER4: - *attr |= TSI148_LCSR_DSAT_AMODE_USER4; + val |= TSI148_LCSR_DSAT_AMODE_USER4; break; default: dev_err(dev, "Invalid address space\n"); @@ -1502,58 +1507,64 @@ static int tsi148_dma_set_vme_src_attributes(struct device *dev, u32 *attr, } if (cycle & VME_SUPER) - *attr |= TSI148_LCSR_DSAT_SUP; + val |= TSI148_LCSR_DSAT_SUP; if (cycle & VME_PROG) - *attr |= TSI148_LCSR_DSAT_PGM; + val |= TSI148_LCSR_DSAT_PGM; + + *attr = cpu_to_be32(val); return 0; } -static int tsi148_dma_set_vme_dest_attributes(struct device *dev, u32 *attr, +static int tsi148_dma_set_vme_dest_attributes(struct device *dev, __be32 *attr, u32 aspace, u32 cycle, u32 dwidth) { + u32 val; + + val = be32_to_cpu(*attr); + /* Setup 2eSST speeds */ switch (cycle & (VME_2eSST160 | VME_2eSST267 | VME_2eSST320)) { case VME_2eSST160: - *attr |= TSI148_LCSR_DDAT_2eSSTM_160; + val |= TSI148_LCSR_DDAT_2eSSTM_160; break; case VME_2eSST267: - *attr |= TSI148_LCSR_DDAT_2eSSTM_267; + val |= TSI148_LCSR_DDAT_2eSSTM_267; break; case VME_2eSST320: - *attr |= TSI148_LCSR_DDAT_2eSSTM_320; + val |= TSI148_LCSR_DDAT_2eSSTM_320; break; } /* Setup cycle types */ if (cycle & VME_SCT) - *attr |= TSI148_LCSR_DDAT_TM_SCT; + val |= TSI148_LCSR_DDAT_TM_SCT; if (cycle & VME_BLT) - *attr |= TSI148_LCSR_DDAT_TM_BLT; + val |= TSI148_LCSR_DDAT_TM_BLT; if (cycle & VME_MBLT) - *attr |= TSI148_LCSR_DDAT_TM_MBLT; + val |= TSI148_LCSR_DDAT_TM_MBLT; if (cycle & VME_2eVME) - *attr |= TSI148_LCSR_DDAT_TM_2eVME; + val |= TSI148_LCSR_DDAT_TM_2eVME; if (cycle & VME_2eSST) - *attr |= TSI148_LCSR_DDAT_TM_2eSST; + val |= TSI148_LCSR_DDAT_TM_2eSST; if (cycle & VME_2eSSTB) { dev_err(dev, "Currently not setting Broadcast Select " "Registers\n"); - *attr |= TSI148_LCSR_DDAT_TM_2eSSTB; + val |= TSI148_LCSR_DDAT_TM_2eSSTB; } /* Setup data width */ switch (dwidth) { case VME_D16: - *attr |= TSI148_LCSR_DDAT_DBW_16; + val |= TSI148_LCSR_DDAT_DBW_16; break; case VME_D32: - *attr |= TSI148_LCSR_DDAT_DBW_32; + val |= TSI148_LCSR_DDAT_DBW_32; break; default: dev_err(dev, "Invalid data width\n"); @@ -1563,31 +1574,31 @@ static int tsi148_dma_set_vme_dest_attributes(struct device *dev, u32 *attr, /* Setup address space */ switch (aspace) { case VME_A16: - *attr |= TSI148_LCSR_DDAT_AMODE_A16; + val |= TSI148_LCSR_DDAT_AMODE_A16; break; case VME_A24: - *attr |= TSI148_LCSR_DDAT_AMODE_A24; + val |= TSI148_LCSR_DDAT_AMODE_A24; break; case VME_A32: - *attr |= TSI148_LCSR_DDAT_AMODE_A32; + val |= TSI148_LCSR_DDAT_AMODE_A32; break; case VME_A64: - *attr |= TSI148_LCSR_DDAT_AMODE_A64; + val |= TSI148_LCSR_DDAT_AMODE_A64; break; case VME_CRCSR: - *attr |= TSI148_LCSR_DDAT_AMODE_CRCSR; + val |= TSI148_LCSR_DDAT_AMODE_CRCSR; break; case VME_USER1: - *attr |= TSI148_LCSR_DDAT_AMODE_USER1; + val |= TSI148_LCSR_DDAT_AMODE_USER1; break; case VME_USER2: - *attr |= TSI148_LCSR_DDAT_AMODE_USER2; + val |= TSI148_LCSR_DDAT_AMODE_USER2; break; case VME_USER3: - *attr |= TSI148_LCSR_DDAT_AMODE_USER3; + val |= TSI148_LCSR_DDAT_AMODE_USER3; break; case VME_USER4: - *attr |= TSI148_LCSR_DDAT_AMODE_USER4; + val |= TSI148_LCSR_DDAT_AMODE_USER4; break; default: dev_err(dev, "Invalid address space\n"); @@ -1596,25 +1607,28 @@ static int tsi148_dma_set_vme_dest_attributes(struct device *dev, u32 *attr, } if (cycle & VME_SUPER) - *attr |= TSI148_LCSR_DDAT_SUP; + val |= TSI148_LCSR_DDAT_SUP; if (cycle & VME_PROG) - *attr |= TSI148_LCSR_DDAT_PGM; + val |= TSI148_LCSR_DDAT_PGM; + + *attr = cpu_to_be32(val); return 0; } /* * Add a link list descriptor to the list + * + * Note: DMA engine expects the DMA descriptor to be big endian. */ static int tsi148_dma_list_add(struct vme_dma_list *list, struct vme_dma_attr *src, struct vme_dma_attr *dest, size_t count) { struct tsi148_dma_entry *entry, *prev; - u32 address_high, address_low; + u32 address_high, address_low, val; struct vme_dma_pattern *pattern_attr; struct vme_dma_pci *pci_attr; struct vme_dma_vme *vme_attr; - dma_addr_t desc_ptr; int retval = 0; struct vme_bridge *tsi148_bridge; @@ -1648,34 +1662,36 @@ static int tsi148_dma_list_add(struct vme_dma_list *list, case VME_DMA_PATTERN: pattern_attr = src->private; - entry->descriptor.dsal = pattern_attr->pattern; - entry->descriptor.dsat = TSI148_LCSR_DSAT_TYP_PAT; + entry->descriptor.dsal = cpu_to_be32(pattern_attr->pattern); + + val = TSI148_LCSR_DSAT_TYP_PAT; + /* Default behaviour is 32 bit pattern */ if (pattern_attr->type & VME_DMA_PATTERN_BYTE) - entry->descriptor.dsat |= TSI148_LCSR_DSAT_PSZ; + val |= TSI148_LCSR_DSAT_PSZ; /* It seems that the default behaviour is to increment */ if ((pattern_attr->type & VME_DMA_PATTERN_INCREMENT) == 0) - entry->descriptor.dsat |= TSI148_LCSR_DSAT_NIN; - + val |= TSI148_LCSR_DSAT_NIN; + entry->descriptor.dsat = cpu_to_be32(val); break; case VME_DMA_PCI: pci_attr = src->private; reg_split((unsigned long long)pci_attr->address, &address_high, &address_low); - entry->descriptor.dsau = address_high; - entry->descriptor.dsal = address_low; - entry->descriptor.dsat = TSI148_LCSR_DSAT_TYP_PCI; + entry->descriptor.dsau = cpu_to_be32(address_high); + entry->descriptor.dsal = cpu_to_be32(address_low); + entry->descriptor.dsat = cpu_to_be32(TSI148_LCSR_DSAT_TYP_PCI); break; case VME_DMA_VME: vme_attr = src->private; reg_split((unsigned long long)vme_attr->address, &address_high, &address_low); - entry->descriptor.dsau = address_high; - entry->descriptor.dsal = address_low; - entry->descriptor.dsat = TSI148_LCSR_DSAT_TYP_VME; + entry->descriptor.dsau = cpu_to_be32(address_high); + entry->descriptor.dsal = cpu_to_be32(address_low); + entry->descriptor.dsat = cpu_to_be32(TSI148_LCSR_DSAT_TYP_VME); retval = tsi148_dma_set_vme_src_attributes( tsi148_bridge->parent, &entry->descriptor.dsat, @@ -1691,9 +1707,8 @@ static int tsi148_dma_list_add(struct vme_dma_list *list, } /* Assume last link - this will be over-written by adding another */ - entry->descriptor.dnlau = 0; - entry->descriptor.dnlal = TSI148_LCSR_DNLAL_LLA; - + entry->descriptor.dnlau = cpu_to_be32(0); + entry->descriptor.dnlal = cpu_to_be32(TSI148_LCSR_DNLAL_LLA); /* Fill out destination part */ switch (dest->type) { @@ -1702,18 +1717,18 @@ static int tsi148_dma_list_add(struct vme_dma_list *list, reg_split((unsigned long long)pci_attr->address, &address_high, &address_low); - entry->descriptor.ddau = address_high; - entry->descriptor.ddal = address_low; - entry->descriptor.ddat = TSI148_LCSR_DDAT_TYP_PCI; + entry->descriptor.ddau = cpu_to_be32(address_high); + entry->descriptor.ddal = cpu_to_be32(address_low); + entry->descriptor.ddat = cpu_to_be32(TSI148_LCSR_DDAT_TYP_PCI); break; case VME_DMA_VME: vme_attr = dest->private; reg_split((unsigned long long)vme_attr->address, &address_high, &address_low); - entry->descriptor.ddau = address_high; - entry->descriptor.ddal = address_low; - entry->descriptor.ddat = TSI148_LCSR_DDAT_TYP_VME; + entry->descriptor.ddau = cpu_to_be32(address_high); + entry->descriptor.ddal = cpu_to_be32(address_low); + entry->descriptor.ddat = cpu_to_be32(TSI148_LCSR_DDAT_TYP_VME); retval = tsi148_dma_set_vme_dest_attributes( tsi148_bridge->parent, &entry->descriptor.ddat, @@ -1729,7 +1744,7 @@ static int tsi148_dma_list_add(struct vme_dma_list *list, } /* Fill out count */ - entry->descriptor.dcnt = (u32)count; + entry->descriptor.dcnt = cpu_to_be32((u32)count); /* Add to list */ list_add_tail(&entry->list, &list->entries); @@ -1739,9 +1754,15 @@ static int tsi148_dma_list_add(struct vme_dma_list *list, prev = list_entry(entry->list.prev, struct tsi148_dma_entry, list); /* We need the bus address for the pointer */ - desc_ptr = virt_to_bus(&entry->descriptor); - reg_split(desc_ptr, &prev->descriptor.dnlau, - &prev->descriptor.dnlal); + entry->dma_handle = dma_map_single(tsi148_bridge->parent, + &entry->descriptor, + sizeof(struct tsi148_dma_descriptor), DMA_TO_DEVICE); + + reg_split((unsigned long long)entry->dma_handle, &address_high, + &address_low); + entry->descriptor.dnlau = cpu_to_be32(address_high); + entry->descriptor.dnlal = cpu_to_be32(address_low); + } return 0; @@ -1784,7 +1805,6 @@ static int tsi148_dma_list_exec(struct vme_dma_list *list) struct vme_dma_resource *ctrlr; int channel, retval = 0; struct tsi148_dma_entry *entry; - dma_addr_t bus_addr; u32 bus_addr_high, bus_addr_low; u32 val, dctlreg = 0; struct vme_bridge *tsi148_bridge; @@ -1817,23 +1837,29 @@ static int tsi148_dma_list_exec(struct vme_dma_list *list) entry = list_first_entry(&list->entries, struct tsi148_dma_entry, list); - bus_addr = virt_to_bus(&entry->descriptor); + entry->dma_handle = dma_map_single(tsi148_bridge->parent, + &entry->descriptor, + sizeof(struct tsi148_dma_descriptor), DMA_TO_DEVICE); mutex_unlock(&ctrlr->mtx); - reg_split(bus_addr, &bus_addr_high, &bus_addr_low); + reg_split(entry->dma_handle, &bus_addr_high, &bus_addr_low); iowrite32be(bus_addr_high, bridge->base + TSI148_LCSR_DMA[channel] + TSI148_LCSR_OFFSET_DNLAU); iowrite32be(bus_addr_low, bridge->base + TSI148_LCSR_DMA[channel] + TSI148_LCSR_OFFSET_DNLAL); + dctlreg = ioread32be(bridge->base + TSI148_LCSR_DMA[channel] + + TSI148_LCSR_OFFSET_DCTL); + /* Start the operation */ iowrite32be(dctlreg | TSI148_LCSR_DCTL_DGO, bridge->base + TSI148_LCSR_DMA[channel] + TSI148_LCSR_OFFSET_DCTL); wait_event_interruptible(bridge->dma_queue[channel], tsi148_dma_busy(ctrlr->parent, channel)); + /* * Read status register, this register is valid until we kick off a * new transfer. @@ -1864,10 +1890,15 @@ static int tsi148_dma_list_empty(struct vme_dma_list *list) struct list_head *pos, *temp; struct tsi148_dma_entry *entry; + struct vme_bridge *tsi148_bridge = list->parent->parent; + /* detach and free each entry */ list_for_each_safe(pos, temp, &list->entries) { list_del(pos); entry = list_entry(pos, struct tsi148_dma_entry, list); + + dma_unmap_single(tsi148_bridge->parent, entry->dma_handle, + sizeof(struct tsi148_dma_descriptor), DMA_TO_DEVICE); kfree(entry); } diff --git a/drivers/staging/vme/bridges/vme_tsi148.h b/drivers/vme/bridges/vme_tsi148.h index a3ac2fe9881..f5ed14382a8 100644 --- a/drivers/staging/vme/bridges/vme_tsi148.h +++ b/drivers/vme/bridges/vme_tsi148.h @@ -56,16 +56,16 @@ struct tsi148_driver { * correctly laid out - It must also be aligned on 64-bit boundaries. */ struct tsi148_dma_descriptor { - u32 dsau; /* Source Address */ - u32 dsal; - u32 ddau; /* Destination Address */ - u32 ddal; - u32 dsat; /* Source attributes */ - u32 ddat; /* Destination attributes */ - u32 dnlau; /* Next link address */ - u32 dnlal; - u32 dcnt; /* Byte count */ - u32 ddbs; /* 2eSST Broadcast select */ + __be32 dsau; /* Source Address */ + __be32 dsal; + __be32 ddau; /* Destination Address */ + __be32 ddal; + __be32 dsat; /* Source attributes */ + __be32 ddat; /* Destination attributes */ + __be32 dnlau; /* Next link address */ + __be32 dnlal; + __be32 dcnt; /* Byte count */ + __be32 ddbs; /* 2eSST Broadcast select */ }; struct tsi148_dma_entry { @@ -75,6 +75,7 @@ struct tsi148_dma_entry { */ struct tsi148_dma_descriptor descriptor; struct list_head list; + dma_addr_t dma_handle; }; /* diff --git a/drivers/staging/vme/vme.c b/drivers/vme/vme.c index 70722ae5232..95a9f71d793 100644 --- a/drivers/staging/vme/vme.c +++ b/drivers/vme/vme.c @@ -30,8 +30,8 @@ #include <linux/mutex.h> #include <linux/spinlock.h> #include <linux/slab.h> +#include <linux/vme.h> -#include "vme.h" #include "vme_bridge.h" /* Bitmask and list of registered buses both protected by common mutex */ @@ -98,14 +98,13 @@ void *vme_alloc_consistent(struct vme_resource *resource, size_t size, } if (bridge->parent == NULL) { - printk(KERN_ERR "Dev entry NULL for" - " bridge %s\n", bridge->name); + printk(KERN_ERR "Dev entry NULL for bridge %s\n", bridge->name); return NULL; } if (bridge->alloc_consistent == NULL) { - printk(KERN_ERR "alloc_consistent not supported by" - " bridge %s\n", bridge->name); + printk(KERN_ERR "alloc_consistent not supported by bridge %s\n", + bridge->name); return NULL; } @@ -133,14 +132,13 @@ void vme_free_consistent(struct vme_resource *resource, size_t size, } if (bridge->parent == NULL) { - printk(KERN_ERR "Dev entry NULL for" - " bridge %s\n", bridge->name); + printk(KERN_ERR "Dev entry NULL for bridge %s\n", bridge->name); return; } if (bridge->free_consistent == NULL) { - printk(KERN_ERR "free_consistent not supported by" - " bridge %s\n", bridge->name); + printk(KERN_ERR "free_consistent not supported by bridge %s\n", + bridge->name); return; } @@ -747,15 +745,13 @@ struct vme_dma_attr *vme_dma_pattern_attribute(u32 pattern, u32 type) attributes = kmalloc(sizeof(struct vme_dma_attr), GFP_KERNEL); if (attributes == NULL) { - printk(KERN_ERR "Unable to allocate memory for attributes " - "structure\n"); + printk(KERN_ERR "Unable to allocate memory for attributes structure\n"); goto err_attr; } pattern_attr = kmalloc(sizeof(struct vme_dma_pattern), GFP_KERNEL); if (pattern_attr == NULL) { - printk(KERN_ERR "Unable to allocate memory for pattern " - "attributes\n"); + printk(KERN_ERR "Unable to allocate memory for pattern attributes\n"); goto err_pat; } @@ -786,15 +782,13 @@ struct vme_dma_attr *vme_dma_pci_attribute(dma_addr_t address) attributes = kmalloc(sizeof(struct vme_dma_attr), GFP_KERNEL); if (attributes == NULL) { - printk(KERN_ERR "Unable to allocate memory for attributes " - "structure\n"); + printk(KERN_ERR "Unable to allocate memory for attributes structure\n"); goto err_attr; } pci_attr = kmalloc(sizeof(struct vme_dma_pci), GFP_KERNEL); if (pci_attr == NULL) { - printk(KERN_ERR "Unable to allocate memory for pci " - "attributes\n"); + printk(KERN_ERR "Unable to allocate memory for pci attributes\n"); goto err_pci; } @@ -826,15 +820,13 @@ struct vme_dma_attr *vme_dma_vme_attribute(unsigned long long address, attributes = kmalloc( sizeof(struct vme_dma_attr), GFP_KERNEL); if (attributes == NULL) { - printk(KERN_ERR "Unable to allocate memory for attributes " - "structure\n"); + printk(KERN_ERR "Unable to allocate memory for attributes structure\n"); goto err_attr; } vme_attr = kmalloc(sizeof(struct vme_dma_vme), GFP_KERNEL); if (vme_attr == NULL) { - printk(KERN_ERR "Unable to allocate memory for vme " - "attributes\n"); + printk(KERN_ERR "Unable to allocate memory for vme attributes\n"); goto err_vme; } @@ -982,8 +974,8 @@ void vme_irq_handler(struct vme_bridge *bridge, int level, int statid) if (call != NULL) call(level, statid, priv_data); else - printk(KERN_WARNING "Spurilous VME interrupt, level:%x, " - "vector:%x\n", level, statid); + printk(KERN_WARNING "Spurilous VME interrupt, level:%x, vector:%x\n", + level, statid); } EXPORT_SYMBOL(vme_irq_handler); @@ -1112,8 +1104,7 @@ struct vme_resource *vme_lm_request(struct vme_dev *vdev) struct vme_lm_resource, list); if (lm == NULL) { - printk(KERN_ERR "Registered NULL Location Monitor " - "resource\n"); + printk(KERN_ERR "Registered NULL Location Monitor resource\n"); continue; } diff --git a/drivers/staging/vme/vme_api.txt b/drivers/vme/vme_api.txt index 856efa35f6e..856efa35f6e 100644 --- a/drivers/staging/vme/vme_api.txt +++ b/drivers/vme/vme_api.txt diff --git a/drivers/staging/vme/vme_bridge.h b/drivers/vme/vme_bridge.h index 934949abd74..934949abd74 100644 --- a/drivers/staging/vme/vme_bridge.h +++ b/drivers/vme/vme_bridge.h |