diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/mmc/core/sd.c | 69 | ||||
| -rw-r--r-- | drivers/mmc/host/sdhci.c | 31 |
2 files changed, 57 insertions, 43 deletions
diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c index 8460568e521..441bdf472c9 100644 --- a/drivers/mmc/core/sd.c +++ b/drivers/mmc/core/sd.c @@ -517,15 +517,54 @@ static int sd_set_bus_speed_mode(struct mmc_card *card, u8 *status) return 0; } +/* Get host's max current setting at its current voltage */ +static u32 sd_get_host_max_current(struct mmc_host *host) +{ + u32 voltage, max_current; + + voltage = 1 << host->ios.vdd; + switch (voltage) { + case MMC_VDD_165_195: + max_current = host->max_current_180; + break; + case MMC_VDD_29_30: + case MMC_VDD_30_31: + max_current = host->max_current_300; + break; + case MMC_VDD_32_33: + case MMC_VDD_33_34: + max_current = host->max_current_330; + break; + default: + max_current = 0; + } + + return max_current; +} + static int sd_set_current_limit(struct mmc_card *card, u8 *status) { int current_limit = SD_SET_CURRENT_NO_CHANGE; int err; + u32 max_current; /* * Current limit switch is only defined for SDR50, SDR104, and DDR50 * bus speed modes. For other bus speed modes, we do not change the * current limit. + */ + if ((card->sd_bus_speed != UHS_SDR50_BUS_SPEED) && + (card->sd_bus_speed != UHS_SDR104_BUS_SPEED) && + (card->sd_bus_speed != UHS_DDR50_BUS_SPEED)) + return 0; + + /* + * Host has different current capabilities when operating at + * different voltages, so find out its max current first. + */ + max_current = sd_get_host_max_current(card->host); + + /* * We only check host's capability here, if we set a limit that is * higher than the card's maximum current, the card will be using its * maximum current, e.g. if the card's maximum current is 300ma, and @@ -533,18 +572,14 @@ static int sd_set_current_limit(struct mmc_card *card, u8 *status) * when we set current limit to 400/600/800ma, the card will draw its * maximum 300ma from the host. */ - if ((card->sd_bus_speed == UHS_SDR50_BUS_SPEED) || - (card->sd_bus_speed == UHS_SDR104_BUS_SPEED) || - (card->sd_bus_speed == UHS_DDR50_BUS_SPEED)) { - if (card->host->caps & MMC_CAP_MAX_CURRENT_800) - current_limit = SD_SET_CURRENT_LIMIT_800; - else if (card->host->caps & MMC_CAP_MAX_CURRENT_600) - current_limit = SD_SET_CURRENT_LIMIT_600; - else if (card->host->caps & MMC_CAP_MAX_CURRENT_400) - current_limit = SD_SET_CURRENT_LIMIT_400; - else if (card->host->caps & MMC_CAP_MAX_CURRENT_200) - current_limit = SD_SET_CURRENT_LIMIT_200; - } + if (max_current >= 800) + current_limit = SD_SET_CURRENT_LIMIT_800; + else if (max_current >= 600) + current_limit = SD_SET_CURRENT_LIMIT_600; + else if (max_current >= 400) + current_limit = SD_SET_CURRENT_LIMIT_400; + else if (max_current >= 200) + current_limit = SD_SET_CURRENT_LIMIT_200; if (current_limit != SD_SET_CURRENT_NO_CHANGE) { err = mmc_sd_switch(card, 1, 3, current_limit, status); @@ -677,6 +712,7 @@ struct device_type sd_type = { int mmc_sd_get_cid(struct mmc_host *host, u32 ocr, u32 *cid, u32 *rocr) { int err; + u32 max_current; /* * Since we're changing the OCR value, we seem to @@ -704,9 +740,12 @@ int mmc_sd_get_cid(struct mmc_host *host, u32 ocr, u32 *cid, u32 *rocr) MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_SDR104 | MMC_CAP_UHS_DDR50)) ocr |= SD_OCR_S18R; - /* If the host can supply more than 150mA, XPC should be set to 1. */ - if (host->caps & (MMC_CAP_SET_XPC_330 | MMC_CAP_SET_XPC_300 | - MMC_CAP_SET_XPC_180)) + /* + * If the host can supply more than 150mA at current voltage, + * XPC should be set to 1. + */ + max_current = sd_get_host_max_current(host); + if (max_current > 150) ocr |= SD_OCR_XPC; try_again: diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index d9966568143..9a11dc39921 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -2906,53 +2906,28 @@ int sdhci_add_host(struct sdhci_host *host) } if (caps[0] & SDHCI_CAN_VDD_330) { - int max_current_330; - ocr_avail |= MMC_VDD_32_33 | MMC_VDD_33_34; - max_current_330 = ((max_current_caps & + mmc->max_current_330 = ((max_current_caps & SDHCI_MAX_CURRENT_330_MASK) >> SDHCI_MAX_CURRENT_330_SHIFT) * SDHCI_MAX_CURRENT_MULTIPLIER; - - if (max_current_330 > 150) - mmc->caps |= MMC_CAP_SET_XPC_330; } if (caps[0] & SDHCI_CAN_VDD_300) { - int max_current_300; - ocr_avail |= MMC_VDD_29_30 | MMC_VDD_30_31; - max_current_300 = ((max_current_caps & + mmc->max_current_300 = ((max_current_caps & SDHCI_MAX_CURRENT_300_MASK) >> SDHCI_MAX_CURRENT_300_SHIFT) * SDHCI_MAX_CURRENT_MULTIPLIER; - - if (max_current_300 > 150) - mmc->caps |= MMC_CAP_SET_XPC_300; } if (caps[0] & SDHCI_CAN_VDD_180) { - int max_current_180; - ocr_avail |= MMC_VDD_165_195; - max_current_180 = ((max_current_caps & + mmc->max_current_180 = ((max_current_caps & SDHCI_MAX_CURRENT_180_MASK) >> SDHCI_MAX_CURRENT_180_SHIFT) * SDHCI_MAX_CURRENT_MULTIPLIER; - - if (max_current_180 > 150) - mmc->caps |= MMC_CAP_SET_XPC_180; - - /* Maximum current capabilities of the host at 1.8V */ - if (max_current_180 >= 800) - mmc->caps |= MMC_CAP_MAX_CURRENT_800; - else if (max_current_180 >= 600) - mmc->caps |= MMC_CAP_MAX_CURRENT_600; - else if (max_current_180 >= 400) - mmc->caps |= MMC_CAP_MAX_CURRENT_400; - else if (max_current_180 >= 200) - mmc->caps |= MMC_CAP_MAX_CURRENT_200; } mmc->ocr_avail = ocr_avail; |