diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/net/ixgbe/ixgbe_82599.c | 73 | ||||
-rw-r--r-- | drivers/net/ixgbe/ixgbe_main.c | 48 | ||||
-rw-r--r-- | drivers/net/ixgbe/ixgbe_type.h | 5 |
3 files changed, 126 insertions, 0 deletions
diff --git a/drivers/net/ixgbe/ixgbe_82599.c b/drivers/net/ixgbe/ixgbe_82599.c index 23be4dbac7e..6bc964fdacb 100644 --- a/drivers/net/ixgbe/ixgbe_82599.c +++ b/drivers/net/ixgbe/ixgbe_82599.c @@ -819,6 +819,9 @@ s32 ixgbe_reset_hw_82599(struct ixgbe_hw *hw) /* Store the permanent mac address */ hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr); + /* Store the permanent SAN mac address */ + hw->mac.ops.get_san_mac_addr(hw, hw->mac.san_addr); + reset_hw_out: return status; } @@ -1294,6 +1297,75 @@ s32 ixgbe_get_device_caps_82599(struct ixgbe_hw *hw, u16 *device_caps) return 0; } +/** + * ixgbe_get_san_mac_addr_offset_82599 - SAN MAC address offset for 82599 + * @hw: pointer to hardware structure + * @san_mac_offset: SAN MAC address offset + * + * This function will read the EEPROM location for the SAN MAC address + * pointer, and returns the value at that location. This is used in both + * get and set mac_addr routines. + **/ +s32 ixgbe_get_san_mac_addr_offset_82599(struct ixgbe_hw *hw, + u16 *san_mac_offset) +{ + /* + * First read the EEPROM pointer to see if the MAC addresses are + * available. + */ + hw->eeprom.ops.read(hw, IXGBE_SAN_MAC_ADDR_PTR, san_mac_offset); + + return 0; +} + +/** + * ixgbe_get_san_mac_addr_82599 - SAN MAC address retrieval for 82599 + * @hw: pointer to hardware structure + * @san_mac_addr: SAN MAC address + * + * Reads the SAN MAC address from the EEPROM, if it's available. This is + * per-port, so set_lan_id() must be called before reading the addresses. + * set_lan_id() is called by identify_sfp(), but this cannot be relied + * upon for non-SFP connections, so we must call it here. + **/ +s32 ixgbe_get_san_mac_addr_82599(struct ixgbe_hw *hw, u8 *san_mac_addr) +{ + u16 san_mac_data, san_mac_offset; + u8 i; + + /* + * First read the EEPROM pointer to see if the MAC addresses are + * available. If they're not, no point in calling set_lan_id() here. + */ + ixgbe_get_san_mac_addr_offset_82599(hw, &san_mac_offset); + + if ((san_mac_offset == 0) || (san_mac_offset == 0xFFFF)) { + /* + * No addresses available in this EEPROM. It's not an + * error though, so just wipe the local address and return. + */ + for (i = 0; i < 6; i++) + san_mac_addr[i] = 0xFF; + + goto san_mac_addr_out; + } + + /* make sure we know which port we need to program */ + hw->mac.ops.set_lan_id(hw); + /* apply the port offset to the address offset */ + (hw->bus.func) ? (san_mac_offset += IXGBE_SAN_MAC_ADDR_PORT1_OFFSET) : + (san_mac_offset += IXGBE_SAN_MAC_ADDR_PORT0_OFFSET); + for (i = 0; i < 3; i++) { + hw->eeprom.ops.read(hw, san_mac_offset, &san_mac_data); + san_mac_addr[i * 2] = (u8)(san_mac_data); + san_mac_addr[i * 2 + 1] = (u8)(san_mac_data >> 8); + san_mac_offset++; + } + +san_mac_addr_out: + return 0; +} + static struct ixgbe_mac_operations mac_ops_82599 = { .init_hw = &ixgbe_init_hw_generic, .reset_hw = &ixgbe_reset_hw_82599, @@ -1303,6 +1375,7 @@ static struct ixgbe_mac_operations mac_ops_82599 = { .get_supported_physical_layer = &ixgbe_get_supported_physical_layer_82599, .enable_rx_dma = &ixgbe_enable_rx_dma_82599, .get_mac_addr = &ixgbe_get_mac_addr_generic, + .get_san_mac_addr = &ixgbe_get_san_mac_addr_82599, .get_device_caps = &ixgbe_get_device_caps_82599, .stop_adapter = &ixgbe_stop_adapter_generic, .get_bus_info = &ixgbe_get_bus_info_generic, diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index d69a0526f24..fe0ac8bdb10 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -4799,6 +4799,48 @@ static int ixgbe_ioctl(struct net_device *netdev, struct ifreq *req, int cmd) return mdio_mii_ioctl(&adapter->hw.phy.mdio, if_mii(req), cmd); } +/** + * ixgbe_add_sanmac_netdev - Add the SAN MAC address to the corresponding + * netdev->dev_addr_list + * @netdev: network interface device structure + * + * Returns non-zero on failure + **/ +static int ixgbe_add_sanmac_netdev(struct net_device *dev) +{ + int err = 0; + struct ixgbe_adapter *adapter = netdev_priv(dev); + struct ixgbe_mac_info *mac = &adapter->hw.mac; + + if (is_valid_ether_addr(mac->san_addr)) { + rtnl_lock(); + err = dev_addr_add(dev, mac->san_addr, NETDEV_HW_ADDR_T_SAN); + rtnl_unlock(); + } + return err; +} + +/** + * ixgbe_del_sanmac_netdev - Removes the SAN MAC address to the corresponding + * netdev->dev_addr_list + * @netdev: network interface device structure + * + * Returns non-zero on failure + **/ +static int ixgbe_del_sanmac_netdev(struct net_device *dev) +{ + int err = 0; + struct ixgbe_adapter *adapter = netdev_priv(dev); + struct ixgbe_mac_info *mac = &adapter->hw.mac; + + if (is_valid_ether_addr(mac->san_addr)) { + rtnl_lock(); + err = dev_addr_del(dev, mac->san_addr, NETDEV_HW_ADDR_T_SAN); + rtnl_unlock(); + } + return err; +} + #ifdef CONFIG_NET_POLL_CONTROLLER /* * Polling 'interrupt' - used by things like netconsole to send skbs @@ -5159,6 +5201,8 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev, ixgbe_setup_dca(adapter); } #endif + /* add san mac addr to netdev */ + ixgbe_add_sanmac_netdev(netdev); dev_info(&pdev->dev, "Intel(R) 10 Gigabit Network Connection\n"); cards_found++; @@ -5229,6 +5273,10 @@ static void __devexit ixgbe_remove(struct pci_dev *pdev) ixgbe_cleanup_fcoe(adapter); #endif /* IXGBE_FCOE */ + + /* remove the added san mac */ + ixgbe_del_sanmac_netdev(netdev); + if (netdev->reg_state == NETREG_REGISTERED) unregister_netdev(netdev); diff --git a/drivers/net/ixgbe/ixgbe_type.h b/drivers/net/ixgbe/ixgbe_type.h index 38f835da4b9..cb73b30f6c4 100644 --- a/drivers/net/ixgbe/ixgbe_type.h +++ b/drivers/net/ixgbe/ixgbe_type.h @@ -1439,6 +1439,7 @@ #define IXGBE_PBANUM0_PTR 0x15 #define IXGBE_PBANUM1_PTR 0x16 #define IXGBE_DEVICE_CAPS 0x2C +#define IXGBE_SAN_MAC_ADDR_PTR 0x28 #define IXGBE_PCIE_MSIX_82599_CAPS 0x72 #define IXGBE_PCIE_MSIX_82598_CAPS 0x62 @@ -1482,6 +1483,8 @@ #define IXGBE_EERD_ATTEMPTS 100000 #endif +#define IXGBE_SAN_MAC_ADDR_PORT0_OFFSET 0x0 +#define IXGBE_SAN_MAC_ADDR_PORT1_OFFSET 0x3 #define IXGBE_DEVICE_CAPS_ALLOW_ANY_SFP 0x1 #define IXGBE_DEVICE_CAPS_FCOE_OFFLOADS 0x2 @@ -2189,6 +2192,7 @@ struct ixgbe_mac_operations { enum ixgbe_media_type (*get_media_type)(struct ixgbe_hw *); u32 (*get_supported_physical_layer)(struct ixgbe_hw *); s32 (*get_mac_addr)(struct ixgbe_hw *, u8 *); + s32 (*get_san_mac_addr)(struct ixgbe_hw *, u8 *); s32 (*get_device_caps)(struct ixgbe_hw *, u16 *); s32 (*stop_adapter)(struct ixgbe_hw *); s32 (*get_bus_info)(struct ixgbe_hw *); @@ -2263,6 +2267,7 @@ struct ixgbe_mac_info { enum ixgbe_mac_type type; u8 addr[IXGBE_ETH_LENGTH_OF_ADDRESS]; u8 perm_addr[IXGBE_ETH_LENGTH_OF_ADDRESS]; + u8 san_addr[IXGBE_ETH_LENGTH_OF_ADDRESS]; s32 mc_filter_type; u32 mcft_size; u32 vft_size; |