diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/input/touchscreen/wacom_w8001.c | 54 |
1 files changed, 48 insertions, 6 deletions
diff --git a/drivers/input/touchscreen/wacom_w8001.c b/drivers/input/touchscreen/wacom_w8001.c index 56dc35c94bb..bc642f1be37 100644 --- a/drivers/input/touchscreen/wacom_w8001.c +++ b/drivers/input/touchscreen/wacom_w8001.c @@ -62,6 +62,7 @@ struct w8001 { unsigned char response[W8001_MAX_LENGTH]; unsigned char data[W8001_MAX_LENGTH]; char phys[32]; + int type; }; static void parse_data(u8 *data, struct w8001_coord *coord) @@ -88,11 +89,52 @@ static void parse_data(u8 *data, struct w8001_coord *coord) coord->tilt_y = data[8] & 0x7F; } +static void report_pen_events(struct w8001 *w8001, struct w8001_coord *coord) +{ + struct input_dev *dev = w8001->dev; + + /* + * We have 1 bit for proximity (rdy) and 3 bits for tip, side, + * side2/eraser. If rdy && f2 are set, this can be either pen + side2, + * or eraser. assume + * - if dev is already in proximity and f2 is toggled → pen + side2 + * - if dev comes into proximity with f2 set → eraser + * If f2 disappears after assuming eraser, fake proximity out for + * eraser and in for pen. + */ + + if (!w8001->type) { + w8001->type = coord->f2 ? BTN_TOOL_RUBBER : BTN_TOOL_PEN; + } else if (w8001->type == BTN_TOOL_RUBBER) { + if (!coord->f2) { + input_report_abs(dev, ABS_PRESSURE, 0); + input_report_key(dev, BTN_TOUCH, 0); + input_report_key(dev, BTN_STYLUS, 0); + input_report_key(dev, BTN_STYLUS2, 0); + input_report_key(dev, BTN_TOOL_RUBBER, 0); + input_sync(dev); + w8001->type = BTN_TOOL_PEN; + } + } else { + input_report_key(dev, BTN_STYLUS2, coord->f2); + } + + input_report_abs(dev, ABS_X, coord->x); + input_report_abs(dev, ABS_Y, coord->y); + input_report_abs(dev, ABS_PRESSURE, coord->pen_pressure); + input_report_key(dev, BTN_TOUCH, coord->tsw); + input_report_key(dev, BTN_STYLUS, coord->f1); + input_report_key(dev, w8001->type, coord->rdy); + input_sync(dev); + + if (!coord->rdy) + w8001->type = 0; +} + static irqreturn_t w8001_interrupt(struct serio *serio, unsigned char data, unsigned int flags) { struct w8001 *w8001 = serio_get_drvdata(serio); - struct input_dev *dev = w8001->dev; struct w8001_coord coord; unsigned char tmp; @@ -112,11 +154,7 @@ static irqreturn_t w8001_interrupt(struct serio *serio, w8001->idx = 0; parse_data(w8001->data, &coord); - input_report_abs(dev, ABS_X, coord.x); - input_report_abs(dev, ABS_Y, coord.y); - input_report_abs(dev, ABS_PRESSURE, coord.pen_pressure); - input_report_key(dev, BTN_TOUCH, coord.tsw); - input_sync(dev); + report_pen_events(w8001, &coord); break; case 10: @@ -221,6 +259,10 @@ static int w8001_connect(struct serio *serio, struct serio_driver *drv) input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); + input_dev->keybit[BIT_WORD(BTN_TOOL_PEN)] |= BIT_MASK(BTN_TOOL_PEN); + input_dev->keybit[BIT_WORD(BTN_TOOL_RUBBER)] |= BIT_MASK(BTN_TOOL_RUBBER); + input_dev->keybit[BIT_WORD(BTN_STYLUS)] |= BIT_MASK(BTN_STYLUS); + input_dev->keybit[BIT_WORD(BTN_STYLUS2)] |= BIT_MASK(BTN_STYLUS2); serio_set_drvdata(serio, w8001); err = serio_open(serio, drv); |