diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/scsi/isci/host.c | 69 | ||||
-rw-r--r-- | drivers/scsi/isci/host.h | 15 | ||||
-rw-r--r-- | drivers/scsi/isci/init.c | 3 |
3 files changed, 87 insertions, 0 deletions
diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c index 6981b773a88..f07f30fada1 100644 --- a/drivers/scsi/isci/host.c +++ b/drivers/scsi/isci/host.c @@ -1263,6 +1263,10 @@ void isci_host_deinit(struct isci_host *ihost) { int i; + /* disable output data selects */ + for (i = 0; i < isci_gpio_count(ihost); i++) + writel(SGPIO_HW_CONTROL, &ihost->scu_registers->peg0.sgpio.output_data_select[i]); + isci_host_change_state(ihost, isci_stopping); for (i = 0; i < SCI_MAX_PORTS; i++) { struct isci_port *iport = &ihost->ports[i]; @@ -1281,6 +1285,12 @@ void isci_host_deinit(struct isci_host *ihost) spin_unlock_irq(&ihost->scic_lock); wait_for_stop(ihost); + + /* disable sgpio: where the above wait should give time for the + * enclosure to sample the gpios going inactive + */ + writel(0, &ihost->scu_registers->peg0.sgpio.interface_control); + sci_controller_reset(ihost); /* Cancel any/all outstanding port timers */ @@ -2365,6 +2375,12 @@ int isci_host_init(struct isci_host *ihost) for (i = 0; i < SCI_MAX_PHYS; i++) isci_phy_init(&ihost->phys[i], ihost, i); + /* enable sgpio */ + writel(1, &ihost->scu_registers->peg0.sgpio.interface_control); + for (i = 0; i < isci_gpio_count(ihost); i++) + writel(SGPIO_HW_CONTROL, &ihost->scu_registers->peg0.sgpio.output_data_select[i]); + writel(0, &ihost->scu_registers->peg0.sgpio.vendor_specific_code); + for (i = 0; i < SCI_MAX_REMOTE_DEVICES; i++) { struct isci_remote_device *idev = &ihost->devices[i]; @@ -2760,3 +2776,56 @@ enum sci_task_status sci_controller_start_task(struct isci_host *ihost, return status; } + +static int sci_write_gpio_tx_gp(struct isci_host *ihost, u8 reg_index, u8 reg_count, u8 *write_data) +{ + int d; + + /* no support for TX_GP_CFG */ + if (reg_index == 0) + return -EINVAL; + + for (d = 0; d < isci_gpio_count(ihost); d++) { + u32 val = 0x444; /* all ODx.n clear */ + int i; + + for (i = 0; i < 3; i++) { + int bit = (i << 2) + 2; + + bit = try_test_sas_gpio_gp_bit(to_sas_gpio_od(d, i), + write_data, reg_index, + reg_count); + if (bit < 0) + break; + + /* if od is set, clear the 'invert' bit */ + val &= ~(bit << ((i << 2) + 2)); + } + + if (i < 3) + break; + writel(val, &ihost->scu_registers->peg0.sgpio.output_data_select[d]); + } + + /* unless reg_index is > 1, we should always be able to write at + * least one register + */ + return d > 0; +} + +int isci_gpio_write(struct sas_ha_struct *sas_ha, u8 reg_type, u8 reg_index, + u8 reg_count, u8 *write_data) +{ + struct isci_host *ihost = sas_ha->lldd_ha; + int written; + + switch (reg_type) { + case SAS_GPIO_REG_TX_GP: + written = sci_write_gpio_tx_gp(ihost, reg_index, reg_count, write_data); + break; + default: + written = -EINVAL; + } + + return written; +} diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h index 9f33831a2f0..646051afd3c 100644 --- a/drivers/scsi/isci/host.h +++ b/drivers/scsi/isci/host.h @@ -440,6 +440,18 @@ static inline bool is_c0(struct pci_dev *pdev) return false; } +/* set hw control for 'activity', even though active enclosures seem to drive + * the activity led on their own. Skip setting FSENG control on 'status' due + * to unexpected operation and 'error' due to not being a supported automatic + * FSENG output + */ +#define SGPIO_HW_CONTROL 0x00000443 + +static inline int isci_gpio_count(struct isci_host *ihost) +{ + return ARRAY_SIZE(ihost->scu_registers->peg0.sgpio.output_data_select); +} + void sci_controller_post_request(struct isci_host *ihost, u32 request); void sci_controller_release_frame(struct isci_host *ihost, @@ -542,4 +554,7 @@ void sci_port_configuration_agent_construct( enum sci_status sci_port_configuration_agent_initialize( struct isci_host *ihost, struct sci_port_configuration_agent *port_agent); + +int isci_gpio_write(struct sas_ha_struct *, u8 reg_type, u8 reg_index, + u8 reg_count, u8 *write_data); #endif diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c index 29aa34efb0f..43fe840fbe9 100644 --- a/drivers/scsi/isci/init.c +++ b/drivers/scsi/isci/init.c @@ -192,6 +192,9 @@ static struct sas_domain_function_template isci_transport_ops = { /* Phy management */ .lldd_control_phy = isci_phy_control, + + /* GPIO support */ + .lldd_write_gpio = isci_gpio_write, }; |