diff options
Diffstat (limited to 'drivers')
317 files changed, 4504 insertions, 3231 deletions
diff --git a/drivers/Kconfig b/drivers/Kconfig index d38f43f593d..2f557f570ad 100644 --- a/drivers/Kconfig +++ b/drivers/Kconfig @@ -68,6 +68,8 @@ source "drivers/ssb/Kconfig" source "drivers/mfd/Kconfig" +source "drivers/regulator/Kconfig" + source "drivers/media/Kconfig" source "drivers/video/Kconfig" diff --git a/drivers/Makefile b/drivers/Makefile index 2503f7b99b2..fceb71a741c 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -56,6 +56,7 @@ obj-$(CONFIG_MAC) += macintosh/ obj-$(CONFIG_ATA_OVER_ETH) += block/aoe/ obj-$(CONFIG_PARIDE) += block/paride/ obj-$(CONFIG_TC) += tc/ +obj-$(CONFIG_UWB) += uwb/ obj-$(CONFIG_USB) += usb/ obj-$(CONFIG_USB_MUSB_HDRC) += usb/musb/ obj-$(CONFIG_PCI) += usb/ @@ -101,4 +102,3 @@ obj-$(CONFIG_SSB) += ssb/ obj-$(CONFIG_VIRTIO) += virtio/ obj-$(CONFIG_REGULATOR) += regulator/ obj-$(CONFIG_STAGING) += staging/ -obj-$(CONFIG_UWB) += uwb/ diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c index 9d568d417ea..cb046c3fc3f 100644 --- a/drivers/acpi/button.c +++ b/drivers/acpi/button.c @@ -262,6 +262,7 @@ static int acpi_lid_send_state(struct acpi_button *button) return -ENODEV; /* input layer checks if event is redundant */ input_report_switch(button->input, SW_LID, !state); + input_sync(button->input); return 0; } @@ -285,8 +286,8 @@ static void acpi_button_notify(acpi_handle handle, u32 event, void *data) input_report_key(input, keycode, 1); input_sync(input); input_report_key(input, keycode, 0); + input_sync(input); } - input_sync(input); acpi_bus_generate_proc_event(button->device, event, ++button->pushed); diff --git a/drivers/acpi/processor_perflib.c b/drivers/acpi/processor_perflib.c index dc98f7a6f2c..dbcf260ea93 100644 --- a/drivers/acpi/processor_perflib.c +++ b/drivers/acpi/processor_perflib.c @@ -38,7 +38,10 @@ #include <asm/uaccess.h> #endif + +#ifdef CONFIG_X86 #include <asm/cpufeature.h> +#endif #include <acpi/acpi_bus.h> #include <acpi/processor.h> @@ -360,11 +363,13 @@ static int acpi_processor_get_performance_info(struct acpi_processor *pr) * the BIOS is older than the CPU and does not know its frequencies */ update_bios: +#ifdef CONFIG_X86 if (ACPI_SUCCESS(acpi_get_handle(pr->handle, "_PPC", &handle))){ if(boot_cpu_has(X86_FEATURE_EST)) printk(KERN_WARNING FW_BUG "BIOS needs update for CPU " "frequency support\n"); } +#endif return result; } diff --git a/drivers/acpi/sleep/main.c b/drivers/acpi/sleep/main.c index 26571bafb15..80c0868d048 100644 --- a/drivers/acpi/sleep/main.c +++ b/drivers/acpi/sleep/main.c @@ -163,6 +163,8 @@ static void acpi_pm_end(void) acpi_target_sleep_state = ACPI_STATE_S0; acpi_sleep_tts_switch(acpi_target_sleep_state); } +#else /* !CONFIG_ACPI_SLEEP */ +#define acpi_target_sleep_state ACPI_STATE_S0 #endif /* CONFIG_ACPI_SLEEP */ #ifdef CONFIG_SUSPEND diff --git a/drivers/acpi/toshiba_acpi.c b/drivers/acpi/toshiba_acpi.c index 2a632f8b7a0..66aac06f2ac 100644 --- a/drivers/acpi/toshiba_acpi.c +++ b/drivers/acpi/toshiba_acpi.c @@ -371,6 +371,7 @@ static void bt_poll_rfkill(struct input_polled_dev *poll_dev) RFKILL_STATE_HARD_BLOCKED); input_report_switch(poll_dev->input, SW_RFKILL_ALL, new_rfk_state); + input_sync(poll_dev->input); } } @@ -842,6 +843,7 @@ static int __init toshiba_acpi_init(void) set_bit(EV_SW, toshiba_acpi.poll_dev->input->evbit); set_bit(SW_RFKILL_ALL, toshiba_acpi.poll_dev->input->swbit); input_report_switch(toshiba_acpi.poll_dev->input, SW_RFKILL_ALL, TRUE); + input_sync(toshiba_acpi.poll_dev->input); ret = input_register_polled_device(toshiba_acpi.poll_dev); if (ret) { diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index aeadd00411a..a67b8e7c712 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -49,6 +49,17 @@ #define DRV_NAME "ahci" #define DRV_VERSION "3.0" +/* Enclosure Management Control */ +#define EM_CTRL_MSG_TYPE 0x000f0000 + +/* Enclosure Management LED Message Type */ +#define EM_MSG_LED_HBA_PORT 0x0000000f +#define EM_MSG_LED_PMP_SLOT 0x0000ff00 +#define EM_MSG_LED_VALUE 0xffff0000 +#define EM_MSG_LED_VALUE_ACTIVITY 0x00070000 +#define EM_MSG_LED_VALUE_OFF 0xfff80000 +#define EM_MSG_LED_VALUE_ON 0x00010000 + static int ahci_skip_host_reset; module_param_named(skip_host_reset, ahci_skip_host_reset, int, 0444); MODULE_PARM_DESC(skip_host_reset, "skip global host reset (0=don't skip, 1=skip)"); @@ -588,6 +599,9 @@ static const struct pci_device_id ahci_pci_tbl[] = { { PCI_VDEVICE(MARVELL, 0x6145), board_ahci_mv }, /* 6145 */ { PCI_VDEVICE(MARVELL, 0x6121), board_ahci_mv }, /* 6121 */ + /* Promise */ + { PCI_VDEVICE(PROMISE, 0x3f20), board_ahci }, /* PDC42819 */ + /* Generic, PCI class code for AHCI */ { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff, board_ahci }, @@ -1220,18 +1234,20 @@ static void ahci_sw_activity_blink(unsigned long arg) struct ahci_em_priv *emp = &pp->em_priv[link->pmp]; unsigned long led_message = emp->led_state; u32 activity_led_state; + unsigned long flags; - led_message &= 0xffff0000; + led_message &= EM_MSG_LED_VALUE; led_message |= ap->port_no | (link->pmp << 8); /* check to see if we've had activity. If so, * toggle state of LED and reset timer. If not, * turn LED to desired idle state. */ + spin_lock_irqsave(ap->lock, flags); if (emp->saved_activity != emp->activity) { emp->saved_activity = emp->activity; /* get the current LED state */ - activity_led_state = led_message & 0x00010000; + activity_led_state = led_message & EM_MSG_LED_VALUE_ON; if (activity_led_state) activity_led_state = 0; @@ -1239,17 +1255,18 @@ static void ahci_sw_activity_blink(unsigned long arg) activity_led_state = 1; /* clear old state */ - led_message &= 0xfff8ffff; + led_message &= ~EM_MSG_LED_VALUE_ACTIVITY; /* toggle state */ led_message |= (activity_led_state << 16); mod_timer(&emp->timer, jiffies + msecs_to_jiffies(100)); } else { /* switch to idle */ - led_message &= 0xfff8ffff; + led_message &= ~EM_MSG_LED_VALUE_ACTIVITY; if (emp->blink_policy == BLINK_OFF) led_message |= (1 << 16); } + spin_unlock_irqrestore(ap->lock, flags); ahci_transmit_led_message(ap, led_message, 4); } @@ -1294,7 +1311,7 @@ static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state, struct ahci_em_priv *emp; /* get the slot number from the message */ - pmp = (state & 0x0000ff00) >> 8; + pmp = (state & EM_MSG_LED_PMP_SLOT) >> 8; if (pmp < MAX_SLOTS) emp = &pp->em_priv[pmp]; else @@ -1319,7 +1336,7 @@ static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state, message[0] |= (4 << 8); /* ignore 0:4 of byte zero, fill in port info yourself */ - message[1] = ((state & 0xfffffff0) | ap->port_no); + message[1] = ((state & ~EM_MSG_LED_HBA_PORT) | ap->port_no); /* write message to EM_LOC */ writel(message[0], mmio + hpriv->em_loc); @@ -1362,7 +1379,7 @@ static ssize_t ahci_led_store(struct ata_port *ap, const char *buf, state = simple_strtoul(buf, NULL, 0); /* get the slot number from the message */ - pmp = (state & 0x0000ff00) >> 8; + pmp = (state & EM_MSG_LED_PMP_SLOT) >> 8; if (pmp < MAX_SLOTS) emp = &pp->em_priv[pmp]; else @@ -1373,7 +1390,7 @@ static ssize_t ahci_led_store(struct ata_port *ap, const char *buf, * activity led through em_message */ if (emp->blink_policy) - state &= 0xfff8ffff; + state &= ~EM_MSG_LED_VALUE_ACTIVITY; return ahci_transmit_led_message(ap, state, size); } @@ -1392,16 +1409,16 @@ static ssize_t ahci_activity_store(struct ata_device *dev, enum sw_activity val) link->flags &= ~(ATA_LFLAG_SW_ACTIVITY); /* set the LED to OFF */ - port_led_state &= 0xfff80000; + port_led_state &= EM_MSG_LED_VALUE_OFF; port_led_state |= (ap->port_no | (link->pmp << 8)); ahci_transmit_led_message(ap, port_led_state, 4); } else { link->flags |= ATA_LFLAG_SW_ACTIVITY; if (val == BLINK_OFF) { /* set LED to ON for idle */ - port_led_state &= 0xfff80000; + port_led_state &= EM_MSG_LED_VALUE_OFF; port_led_state |= (ap->port_no | (link->pmp << 8)); - port_led_state |= 0x00010000; /* check this */ + port_led_state |= EM_MSG_LED_VALUE_ON; /* check this */ ahci_transmit_led_message(ap, port_led_state, 4); } } @@ -2612,7 +2629,7 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) u32 em_loc = readl(mmio + HOST_EM_LOC); u32 em_ctl = readl(mmio + HOST_EM_CTL); - messages = (em_ctl & 0x000f0000) >> 16; + messages = (em_ctl & EM_CTRL_MSG_TYPE) >> 16; /* we only support LED message type right now */ if ((messages & 0x01) && (ahci_em_messages == 1)) { diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c index 75a406f5e69..5c33767e66d 100644 --- a/drivers/ata/ata_generic.c +++ b/drivers/ata/ata_generic.c @@ -1,6 +1,6 @@ /* * ata_generic.c - Generic PATA/SATA controller driver. - * Copyright 2005 Red Hat Inc <alan@redhat.com>, all rights reserved. + * Copyright 2005 Red Hat Inc, all rights reserved. * * Elements from ide/pci/generic.c * Copyright (C) 2001-2002 Andre Hedrick <andre@linux-ide.org> diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index e9e32ed6b1a..8e37be19bbf 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -14,7 +14,7 @@ * * Copyright (C) 1998-1999 Andrzej Krzysztofowicz, Author and Maintainer * Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org> - * Copyright (C) 2003 Red Hat Inc <alan@redhat.com> + * Copyright (C) 2003 Red Hat Inc * * * This program is free software; you can redistribute it and/or modify @@ -738,7 +738,6 @@ static void piix_set_piomode(struct ata_port *ap, struct ata_device *adev) * do_pata_set_dmamode - Initialize host controller PATA PIO timings * @ap: Port whose timings we are configuring * @adev: Drive in question - * @udma: udma mode, 0 - 6 * @isich: set if the chip is an ICH device * * Set UDMA mode for device, in host controller PCI config space. diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 8cb0b360bfd..622350d9b2e 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -1268,7 +1268,7 @@ u64 ata_tf_to_lba48(const struct ata_taskfile *tf) sectors |= ((u64)(tf->hob_lbah & 0xff)) << 40; sectors |= ((u64)(tf->hob_lbam & 0xff)) << 32; - sectors |= (tf->hob_lbal & 0xff) << 24; + sectors |= ((u64)(tf->hob_lbal & 0xff)) << 24; sectors |= (tf->lbah & 0xff) << 16; sectors |= (tf->lbam & 0xff) << 8; sectors |= (tf->lbal & 0xff); @@ -1602,7 +1602,6 @@ unsigned long ata_id_xfermask(const u16 *id) /** * ata_pio_queue_task - Queue port_task * @ap: The ata_port to queue port_task for - * @fn: workqueue function to be scheduled * @data: data for @fn to use * @delay: delay time in msecs for workqueue function * @@ -2159,6 +2158,10 @@ retry: static inline u8 ata_dev_knobble(struct ata_device *dev) { struct ata_port *ap = dev->link->ap; + + if (ata_dev_blacklisted(dev) & ATA_HORKAGE_BRIDGE_OK) + return 0; + return ((ap->cbl == ATA_CBL_SATA) && (!ata_id_is_sata(dev->id))); } @@ -4021,6 +4024,7 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { /* Weird ATAPI devices */ { "TORiSAN DVD-ROM DRD-N216", NULL, ATA_HORKAGE_MAX_SEC_128 }, + { "QUANTUM DAT DAT72-000", NULL, ATA_HORKAGE_ATAPI_MOD16_DMA }, /* Devices we expect to fail diagnostics */ @@ -4063,6 +4067,9 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { { "TSSTcorp CDDVDW SH-S202N", "SB00", ATA_HORKAGE_IVB, }, { "TSSTcorp CDDVDW SH-S202N", "SB01", ATA_HORKAGE_IVB, }, + /* Devices that do not need bridging limits applied */ + { "MTRON MSP-SATA*", NULL, ATA_HORKAGE_BRIDGE_OK, }, + /* End Marker */ { } }; @@ -4156,29 +4163,33 @@ static int cable_is_40wire(struct ata_port *ap) struct ata_link *link; struct ata_device *dev; - /* If the controller thinks we are 40 wire, we are */ + /* If the controller thinks we are 40 wire, we are. */ if (ap->cbl == ATA_CBL_PATA40) return 1; - /* If the controller thinks we are 80 wire, we are */ + + /* If the controller thinks we are 80 wire, we are. */ if (ap->cbl == ATA_CBL_PATA80 || ap->cbl == ATA_CBL_SATA) return 0; - /* If the system is known to be 40 wire short cable (eg laptop), - then we allow 80 wire modes even if the drive isn't sure */ + + /* If the system is known to be 40 wire short cable (eg + * laptop), then we allow 80 wire modes even if the drive + * isn't sure. + */ if (ap->cbl == ATA_CBL_PATA40_SHORT) return 0; - /* If the controller doesn't know we scan - - - Note: We look for all 40 wire detects at this point. - Any 80 wire detect is taken to be 80 wire cable - because - - In many setups only the one drive (slave if present) - will give a valid detect - - If you have a non detect capable drive you don't - want it to colour the choice - */ + + /* If the controller doesn't know, we scan. + * + * Note: We look for all 40 wire detects at this point. Any + * 80 wire detect is taken to be 80 wire cable because + * - in many setups only the one drive (slave if present) will + * give a valid detect + * - if you have a non detect capable drive you don't want it + * to colour the choice + */ ata_port_for_each_link(link, ap) { ata_link_for_each_dev(dev, link) { - if (!ata_is_40wire(dev)) + if (ata_dev_enabled(dev) && !ata_is_40wire(dev)) return 0; } } @@ -4434,7 +4445,8 @@ int atapi_check_dma(struct ata_queued_cmd *qc) /* Don't allow DMA if it isn't multiple of 16 bytes. Quite a * few ATAPI devices choke on such DMA requests. */ - if (unlikely(qc->nbytes & 15)) + if (!(qc->dev->horkage & ATA_HORKAGE_ATAPI_MOD16_DMA) && + unlikely(qc->nbytes & 15)) return 1; if (ap->ops->check_atapi_dma) @@ -4553,6 +4565,7 @@ void swap_buf_le16(u16 *buf, unsigned int buf_words) /** * ata_qc_new_init - Request an available ATA command, and initialize it * @dev: Device from whom we request an available command structure + * @tag: command tag * * LOCKING: * None. @@ -4643,7 +4656,6 @@ static void ata_verify_xfer(struct ata_queued_cmd *qc) /** * ata_qc_complete - Complete an active ATA command * @qc: Command to complete - * @err_mask: ATA Status register contents * * Indicate to the mid and upper layers that an ATA * command has completed, with either an ok or not-ok status. @@ -5924,7 +5936,7 @@ static void ata_port_detach(struct ata_port *ap) * to us. Restore SControl and disable all existing devices. */ __ata_port_for_each_link(link, ap) { - sata_scr_write(link, SCR_CONTROL, link->saved_scontrol); + sata_scr_write(link, SCR_CONTROL, link->saved_scontrol & 0xff0); ata_link_for_each_dev(dev, link) ata_dev_disable(dev); } diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index 5d687d7cffa..8077bdf5d30 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -603,6 +603,9 @@ void ata_scsi_error(struct Scsi_Host *host) ata_link_for_each_dev(dev, link) { int devno = dev->devno; + if (!ata_dev_enabled(dev)) + continue; + ehc->saved_xfer_mode[devno] = dev->xfer_mode; if (ata_ncq_enabled(dev)) ehc->saved_ncq_enabled |= 1 << devno; @@ -1161,6 +1164,7 @@ void ata_eh_detach_dev(struct ata_device *dev) { struct ata_link *link = dev->link; struct ata_port *ap = link->ap; + struct ata_eh_context *ehc = &link->eh_context; unsigned long flags; ata_dev_disable(dev); @@ -1174,9 +1178,11 @@ void ata_eh_detach_dev(struct ata_device *dev) ap->pflags |= ATA_PFLAG_SCSI_HOTPLUG; } - /* clear per-dev EH actions */ + /* clear per-dev EH info */ ata_eh_clear_action(link, dev, &link->eh_info, ATA_EH_PERDEV_MASK); ata_eh_clear_action(link, dev, &link->eh_context.i, ATA_EH_PERDEV_MASK); + ehc->saved_xfer_mode[dev->devno] = 0; + ehc->saved_ncq_enabled &= ~(1 << dev->devno); spin_unlock_irqrestore(ap->lock, flags); } @@ -2787,6 +2793,9 @@ int ata_set_mode(struct ata_link *link, struct ata_device **r_failed_dev) /* if data transfer is verified, clear DUBIOUS_XFER on ering top */ ata_link_for_each_dev(dev, link) { + if (!ata_dev_enabled(dev)) + continue; + if (!(dev->flags & ATA_DFLAG_DUBIOUS_XFER)) { struct ata_ering_entry *ent; @@ -2808,6 +2817,9 @@ int ata_set_mode(struct ata_link *link, struct ata_device **r_failed_dev) u8 saved_xfer_mode = ehc->saved_xfer_mode[dev->devno]; u8 saved_ncq = !!(ehc->saved_ncq_enabled & (1 << dev->devno)); + if (!ata_dev_enabled(dev)) + continue; + if (dev->xfer_mode != saved_xfer_mode || ata_ncq_enabled(dev) != saved_ncq) dev->flags |= ATA_DFLAG_DUBIOUS_XFER; diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 4b95c4387e9..3fa75eac135 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -190,7 +190,7 @@ static ssize_t ata_scsi_park_show(struct device *device, struct ata_port *ap; struct ata_link *link; struct ata_device *dev; - unsigned long flags; + unsigned long flags, now; unsigned int uninitialized_var(msecs); int rc = 0; @@ -208,10 +208,11 @@ static ssize_t ata_scsi_park_show(struct device *device, } link = dev->link; + now = jiffies; if (ap->pflags & ATA_PFLAG_EH_IN_PROGRESS && link->eh_context.unloaded_mask & (1 << dev->devno) && - time_after(dev->unpark_deadline, jiffies)) - msecs = jiffies_to_msecs(dev->unpark_deadline - jiffies); + time_after(dev->unpark_deadline, now)) + msecs = jiffies_to_msecs(dev->unpark_deadline - now); else msecs = 0; @@ -1107,6 +1108,15 @@ static int ata_scsi_dev_config(struct scsi_device *sdev, depth = min(sdev->host->can_queue, ata_id_queue_depth(dev->id)); depth = min(ATA_MAX_QUEUE - 1, depth); + + /* + * If this device is behind a port multiplier, we have + * to share the tag map between all devices on that PMP. + * Set up the shared tag map here and we get automatic. + */ + if (dev->link->ap->pmp_link) + scsi_init_shared_tag_map(sdev->host, ATA_MAX_QUEUE - 1); + scsi_set_tag_type(sdev, MSG_SIMPLE_TAG); scsi_activate_tcq(sdev, depth); } diff --git a/drivers/ata/pata_acpi.c b/drivers/ata/pata_acpi.c index eb919c16a03..e2e332d8ff9 100644 --- a/drivers/ata/pata_acpi.c +++ b/drivers/ata/pata_acpi.c @@ -1,7 +1,7 @@ /* * ACPI PATA driver * - * (c) 2007 Red Hat <alan@redhat.com> + * (c) 2007 Red Hat */ #include <linux/kernel.h> diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c index 5ca70fa1f58..73c466e452c 100644 --- a/drivers/ata/pata_ali.c +++ b/drivers/ata/pata_ali.c @@ -1,7 +1,6 @@ /* * pata_ali.c - ALI 15x3 PATA for new ATA layer * (C) 2005 Red Hat Inc - * Alan Cox <alan@redhat.com> * * based in part upon * linux/drivers/ide/pci/alim15x3.c Version 0.17 2003/01/02 diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c index 57dd00f463d..0ec9c7d9fe9 100644 --- a/drivers/ata/pata_amd.c +++ b/drivers/ata/pata_amd.c @@ -1,7 +1,6 @@ /* * pata_amd.c - AMD PATA for new ATA layer * (C) 2005-2006 Red Hat Inc - * Alan Cox <alan@redhat.com> * * Based on pata-sil680. Errata information is taken from data sheets * and the amd74xx.c driver by Vojtech Pavlik. Nvidia SATA devices are diff --git a/drivers/ata/pata_artop.c b/drivers/ata/pata_artop.c index 0f513bc1119..6b3092c75ff 100644 --- a/drivers/ata/pata_artop.c +++ b/drivers/ata/pata_artop.c @@ -1,7 +1,7 @@ /* * pata_artop.c - ARTOP ATA controller driver * - * (C) 2006 Red Hat <alan@redhat.com> + * (C) 2006 Red Hat * (C) 2007 Bartlomiej Zolnierkiewicz * * Based in part on drivers/ide/pci/aec62xx.c diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c index e8a0d99d735..0e2cde8f997 100644 --- a/drivers/ata/pata_atiixp.c +++ b/drivers/ata/pata_atiixp.c @@ -1,7 +1,6 @@ /* * pata_atiixp.c - ATI PATA for new ATA layer * (C) 2005 Red Hat Inc - * Alan Cox <alan@redhat.com> * * Based on * diff --git a/drivers/ata/pata_cmd640.c b/drivers/ata/pata_cmd640.c index 2de30b99027..34a394264c3 100644 --- a/drivers/ata/pata_cmd640.c +++ b/drivers/ata/pata_cmd640.c @@ -1,7 +1,6 @@ /* * pata_cmd640.c - CMD640 PCI PATA for new ATA layer * (C) 2007 Red Hat Inc - * Alan Cox <alan@redhat.com> * * Based upon * linux/drivers/ide/pci/cmd640.c Version 1.02 Sep 01, 1996 diff --git a/drivers/ata/pata_cmd64x.c b/drivers/ata/pata_cmd64x.c index ddd09b7d98c..3167d8fed2f 100644 --- a/drivers/ata/pata_cmd64x.c +++ b/drivers/ata/pata_cmd64x.c @@ -1,7 +1,7 @@ /* * pata_cmd64x.c - CMD64x PATA for new ATA layer * (C) 2005 Red Hat Inc - * Alan Cox <alan@redhat.com> + * Alan Cox <alan@lxorguk.ukuu.org.uk> * * Based upon * linux/drivers/ide/pci/cmd64x.c Version 1.30 Sept 10, 2002 diff --git a/drivers/ata/pata_cs5530.c b/drivers/ata/pata_cs5530.c index 0c4b271a9d5..bba453381f4 100644 --- a/drivers/ata/pata_cs5530.c +++ b/drivers/ata/pata_cs5530.c @@ -1,7 +1,6 @@ /* * pata-cs5530.c - CS5530 PATA for new ATA layer * (C) 2005 Red Hat Inc - * Alan Cox <alan@redhat.com> * * based upon cs5530.c by Mark Lord. * diff --git a/drivers/ata/pata_cs5535.c b/drivers/ata/pata_cs5535.c index f1b6556f048..1b2d4a0f5f7 100644 --- a/drivers/ata/pata_cs5535.c +++ b/drivers/ata/pata_cs5535.c @@ -1,7 +1,7 @@ /* * pata-cs5535.c - CS5535 PATA for new ATA layer * (C) 2005-2006 Red Hat Inc - * Alan Cox <alan@redhat.com> + * Alan Cox <alan@lxorguk.ukuu.org.uk> * * based upon cs5535.c from AMD <Jens.Altmann@amd.com> as cleaned up and * made readable and Linux style by Wolfgang Zuleger <wolfgang.zuleger@gmx.de diff --git a/drivers/ata/pata_cypress.c b/drivers/ata/pata_cypress.c index 2ff62608ae3..d546425cd38 100644 --- a/drivers/ata/pata_cypress.c +++ b/drivers/ata/pata_cypress.c @@ -1,7 +1,7 @@ /* * pata_cypress.c - Cypress PATA for new ATA layer * (C) 2006 Red Hat Inc - * Alan Cox <alan@redhat.com> + * Alan Cox * * Based heavily on * linux/drivers/ide/pci/cy82c693.c Version 0.40 Sep. 10, 2002 diff --git a/drivers/ata/pata_efar.c b/drivers/ata/pata_efar.c index 9fba82976ba..ac6392ea35b 100644 --- a/drivers/ata/pata_efar.c +++ b/drivers/ata/pata_efar.c @@ -1,7 +1,7 @@ /* * pata_efar.c - EFAR PIIX clone controller driver * - * (C) 2005 Red Hat <alan@redhat.com> + * (C) 2005 Red Hat * * Some parts based on ata_piix.c by Jeff Garzik and others. * diff --git a/drivers/ata/pata_isapnp.c b/drivers/ata/pata_isapnp.c index 6a111baab52..15cdb9148aa 100644 --- a/drivers/ata/pata_isapnp.c +++ b/drivers/ata/pata_isapnp.c @@ -1,7 +1,7 @@ /* * pata-isapnp.c - ISA PnP PATA controller driver. - * Copyright 2005/2006 Red Hat Inc <alan@redhat.com>, all rights reserved. + * Copyright 2005/2006 Red Hat Inc, all rights reserved. * * Based in part on ide-pnp.c by Andrey Panin <pazke@donpac.ru> */ diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c index 0221c9a4676..860ede52628 100644 --- a/drivers/ata/pata_it821x.c +++ b/drivers/ata/pata_it821x.c @@ -1,7 +1,7 @@ /* * pata_it821x.c - IT821x PATA for new ATA layer * (C) 2005 Red Hat Inc - * Alan Cox <alan@redhat.com> + * Alan Cox <alan@lxorguk.ukuu.org.uk> * (C) 2007 Bartlomiej Zolnierkiewicz * * based upon @@ -10,7 +10,7 @@ * * linux/drivers/ide/pci/it821x.c Version 0.09 December 2004 * - * Copyright (C) 2004 Red Hat <alan@redhat.com> + * Copyright (C) 2004 Red Hat * * May be copied or modified under the terms of the GNU General Public License * Based in part on the ITE vendor provided SCSI driver. @@ -557,9 +557,8 @@ static unsigned int it821x_read_id(struct ata_device *adev, if (strstr(model_num, "Integrated Technology Express")) { /* Set feature bits the firmware neglects */ id[49] |= 0x0300; /* LBA, DMA */ - id[82] |= 0x0400; /* LBA48 */ id[83] &= 0x7FFF; - id[83] |= 0x4000; /* Word 83 is valid */ + id[83] |= 0x4400; /* Word 83 is valid and LBA48 */ id[86] |= 0x0400; /* LBA48 on */ id[ATA_ID_MAJOR_VER] |= 0x1F; } diff --git a/drivers/ata/pata_jmicron.c b/drivers/ata/pata_jmicron.c index 73b7596816b..38cf1ab2d28 100644 --- a/drivers/ata/pata_jmicron.c +++ b/drivers/ata/pata_jmicron.c @@ -4,7 +4,7 @@ * driven by AHCI in the usual configuration although * this driver can handle other setups if we need it. * - * (c) 2006 Red Hat <alan@redhat.com> + * (c) 2006 Red Hat */ #include <linux/kernel.h> diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c index bc037ffce20..930c2208640 100644 --- a/drivers/ata/pata_legacy.c +++ b/drivers/ata/pata_legacy.c @@ -1,6 +1,6 @@ /* * pata-legacy.c - Legacy port PATA/SATA controller driver. - * Copyright 2005/2006 Red Hat <alan@redhat.com>, all rights reserved. + * Copyright 2005/2006 Red Hat, all rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/ata/pata_marvell.c b/drivers/ata/pata_marvell.c index 0d87eec8496..76e399bf8c1 100644 --- a/drivers/ata/pata_marvell.c +++ b/drivers/ata/pata_marvell.c @@ -5,7 +5,7 @@ * isn't making full use of the device functionality but it is * easy to get working. * - * (c) 2006 Red Hat <alan@redhat.com> + * (c) 2006 Red Hat */ #include <linux/kernel.h> diff --git a/drivers/ata/pata_mpiix.c b/drivers/ata/pata_mpiix.c index 7d7e3fdab71..7c8faa48b5f 100644 --- a/drivers/ata/pata_mpiix.c +++ b/drivers/ata/pata_mpiix.c @@ -1,7 +1,7 @@ /* * pata_mpiix.c - Intel MPIIX PATA for new ATA layer * (C) 2005-2006 Red Hat Inc - * Alan Cox <alan@redhat.com> + * Alan Cox <alan@lxorguk.ukuu.org.uk> * * The MPIIX is different enough to the PIIX4 and friends that we give it * a separate driver. The old ide/pci code handles this by just not tuning diff --git a/drivers/ata/pata_netcell.c b/drivers/ata/pata_netcell.c index d9719c8b9db..9dc05e1656a 100644 --- a/drivers/ata/pata_netcell.c +++ b/drivers/ata/pata_netcell.c @@ -1,7 +1,7 @@ /* * pata_netcell.c - Netcell PATA driver * - * (c) 2006 Red Hat <alan@redhat.com> + * (c) 2006 Red Hat */ #include <linux/kernel.h> diff --git a/drivers/ata/pata_ninja32.c b/drivers/ata/pata_ninja32.c index 565e67cd13f..4e466eae8b4 100644 --- a/drivers/ata/pata_ninja32.c +++ b/drivers/ata/pata_ninja32.c @@ -1,7 +1,6 @@ /* * pata_ninja32.c - Ninja32 PATA for new ATA layer * (C) 2007 Red Hat Inc - * Alan Cox <alan@redhat.com> * * Note: The controller like many controllers has shared timings for * PIO and DMA. We thus flip to the DMA timings in dma_start and flip back @@ -45,7 +44,7 @@ #include <linux/libata.h> #define DRV_NAME "pata_ninja32" -#define DRV_VERSION "0.0.1" +#define DRV_VERSION "0.1.1" /** @@ -89,6 +88,17 @@ static struct ata_port_operations ninja32_port_ops = { .set_piomode = ninja32_set_piomode, }; +static void ninja32_program(void __iomem *base) +{ + iowrite8(0x05, base + 0x01); /* Enable interrupt lines */ + iowrite8(0xBE, base + 0x02); /* Burst, ?? setup */ + iowrite8(0x01, base + 0x03); /* Unknown */ + iowrite8(0x20, base + 0x04); /* WAIT0 */ + iowrite8(0x8f, base + 0x05); /* Unknown */ + iowrite8(0xa4, base + 0x1c); /* Unknown */ + iowrite8(0x83, base + 0x1d); /* BMDMA control: WAIT0 */ +} + static int ninja32_init_one(struct pci_dev *dev, const struct pci_device_id *id) { struct ata_host *host; @@ -134,18 +144,28 @@ static int ninja32_init_one(struct pci_dev *dev, const struct pci_device_id *id) ap->ioaddr.bmdma_addr = base; ata_sff_std_ports(&ap->ioaddr); - iowrite8(0x05, base + 0x01); /* Enable interrupt lines */ - iowrite8(0xBE, base + 0x02); /* Burst, ?? setup */ - iowrite8(0x01, base + 0x03); /* Unknown */ - iowrite8(0x20, base + 0x04); /* WAIT0 */ - iowrite8(0x8f, base + 0x05); /* Unknown */ - iowrite8(0xa4, base + 0x1c); /* Unknown */ - iowrite8(0x83, base + 0x1d); /* BMDMA control: WAIT0 */ + ninja32_program(base); /* FIXME: Should we disable them at remove ? */ return ata_host_activate(host, dev->irq, ata_sff_interrupt, IRQF_SHARED, &ninja32_sht); } +#ifdef CONFIG_PM + +static int ninja32_reinit_one(struct pci_dev *pdev) +{ + struct ata_host *host = dev_get_drvdata(&pdev->dev); + int rc; + + rc = ata_pci_device_do_resume(pdev); + if (rc) + return rc; + ninja32_program(host->iomap[0]); + ata_host_resume(host); + return 0; +} +#endif + static const struct pci_device_id ninja32[] = { { 0x1145, 0xf021, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, { 0x1145, 0xf024, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, @@ -156,7 +176,11 @@ static struct pci_driver ninja32_pci_driver = { .name = DRV_NAME, .id_table = ninja32, .probe = ninja32_init_one, - .remove = ata_pci_remove_one + .remove = ata_pci_remove_one, +#ifdef CONFIG_PM + .suspend = ata_pci_device_suspend, + .resume = ninja32_reinit_one, +#endif }; static int __init ninja32_init(void) diff --git a/drivers/ata/pata_ns87410.c b/drivers/ata/pata_ns87410.c index be756b7ef07..40d411c460d 100644 --- a/drivers/ata/pata_ns87410.c +++ b/drivers/ata/pata_ns87410.c @@ -1,7 +1,6 @@ /* * pata_ns87410.c - National Semiconductor 87410 PATA for new ATA layer * (C) 2006 Red Hat Inc - * Alan Cox <alan@redhat.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/ata/pata_ns87415.c b/drivers/ata/pata_ns87415.c index e0aa7eaaee0..89bf5f865d6 100644 --- a/drivers/ata/pata_ns87415.c +++ b/drivers/ata/pata_ns87415.c @@ -1,7 +1,7 @@ /* * pata_ns87415.c - NS87415 (non PARISC) PATA * - * (C) 2005 Red Hat <alan@redhat.com> + * (C) 2005 Red Hat <alan@lxorguk.ukuu.org.uk> * * This is a fairly generic MWDMA controller. It has some limitations * as it requires timing reloads on PIO/DMA transitions but it is otherwise diff --git a/drivers/ata/pata_oldpiix.c b/drivers/ata/pata_oldpiix.c index df64f244300..c0dbc46a348 100644 --- a/drivers/ata/pata_oldpiix.c +++ b/drivers/ata/pata_oldpiix.c @@ -1,7 +1,7 @@ /* * pata_oldpiix.c - Intel PATA/SATA controllers * - * (C) 2005 Red Hat <alan@redhat.com> + * (C) 2005 Red Hat * * Some parts based on ata_piix.c by Jeff Garzik and others. * diff --git a/drivers/ata/pata_opti.c b/drivers/ata/pata_opti.c index fb2cf661b0e..e4fa4d565e9 100644 --- a/drivers/ata/pata_opti.c +++ b/drivers/ata/pata_opti.c @@ -1,7 +1,6 @@ /* * pata_opti.c - ATI PATA for new ATA layer * (C) 2005 Red Hat Inc - * Alan Cox <alan@redhat.com> * * Based on * linux/drivers/ide/pci/opti621.c Version 0.7 Sept 10, 2002 diff --git a/drivers/ata/pata_optidma.c b/drivers/ata/pata_optidma.c index 4cd74445631..93bb6e91973 100644 --- a/drivers/ata/pata_optidma.c +++ b/drivers/ata/pata_optidma.c @@ -1,7 +1,6 @@ /* * pata_optidma.c - Opti DMA PATA for new ATA layer * (C) 2006 Red Hat Inc - * Alan Cox <alan@redhat.com> * * The Opti DMA controllers are related to the older PIO PCI controllers * and indeed the VLB ones. The main differences are that the timing diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c index 02b596b9cf6..271cb64d429 100644 --- a/drivers/ata/pata_pcmcia.c +++ b/drivers/ata/pata_pcmcia.c @@ -1,6 +1,6 @@ /* * pata_pcmcia.c - PCMCIA PATA controller driver. - * Copyright 2005-2006 Red Hat Inc <alan@redhat.com>, all rights reserved. + * Copyright 2005-2006 Red Hat Inc, all rights reserved. * PCMCIA ident update Copyright 2006 Marcin Juszkiewicz * <openembedded@hrw.one.pl> * diff --git a/drivers/ata/pata_pdc202xx_old.c b/drivers/ata/pata_pdc202xx_old.c index d2673060bc8..799a6a09871 100644 --- a/drivers/ata/pata_pdc202xx_old.c +++ b/drivers/ata/pata_pdc202xx_old.c @@ -1,7 +1,7 @@ /* * pata_pdc202xx_old.c - Promise PDC202xx PATA for new ATA layer * (C) 2005 Red Hat Inc - * Alan Cox <alan@redhat.com> + * Alan Cox <alan@lxorguk.ukuu.org.uk> * (C) 2007 Bartlomiej Zolnierkiewicz * * Based in part on linux/drivers/ide/pci/pdc202xx_old.c diff --git a/drivers/ata/pata_platform.c b/drivers/ata/pata_platform.c index 8f65ad61b8a..77e4e3b17f5 100644 --- a/drivers/ata/pata_platform.c +++ b/drivers/ata/pata_platform.c @@ -5,7 +5,7 @@ * * Based on pata_pcmcia: * - * Copyright 2005-2006 Red Hat Inc <alan@redhat.com>, all rights reserved. + * Copyright 2005-2006 Red Hat Inc, all rights reserved. * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive diff --git a/drivers/ata/pata_qdi.c b/drivers/ata/pata_qdi.c index 63b7a1c165a..3080f371222 100644 --- a/drivers/ata/pata_qdi.c +++ b/drivers/ata/pata_qdi.c @@ -1,6 +1,6 @@ /* * pata_qdi.c - QDI VLB ATA controllers - * (C) 2006 Red Hat <alan@redhat.com> + * (C) 2006 Red Hat * * This driver mostly exists as a proof of concept for non PCI devices under * libata. While the QDI6580 was 'neat' in 1993 it is no longer terribly diff --git a/drivers/ata/pata_radisys.c b/drivers/ata/pata_radisys.c index 1c0d9fa7ee5..0b0aa452de1 100644 --- a/drivers/ata/pata_radisys.c +++ b/drivers/ata/pata_radisys.c @@ -1,7 +1,7 @@ /* * pata_radisys.c - Intel PATA/SATA controllers * - * (C) 2006 Red Hat <alan@redhat.com> + * (C) 2006 Red Hat <alan@lxorguk.ukuu.org.uk> * * Some parts based on ata_piix.c by Jeff Garzik and others. * diff --git a/drivers/ata/pata_sc1200.c b/drivers/ata/pata_sc1200.c index 0278fd2b8fb..9a4bdca5461 100644 --- a/drivers/ata/pata_sc1200.c +++ b/drivers/ata/pata_sc1200.c @@ -1,5 +1,5 @@ /* - * New ATA layer SC1200 driver Alan Cox <alan@redhat.com> + * New ATA layer SC1200 driver Alan Cox <alan@lxorguk.ukuu.org.uk> * * TODO: Mode selection filtering * TODO: Can't enable second channel until ATA core has serialize diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c index 16673d16857..cf3707e516a 100644 --- a/drivers/ata/pata_scc.c +++ b/drivers/ata/pata_scc.c @@ -8,7 +8,7 @@ * Copyright 2003-2005 Jeff Garzik * Copyright (C) 1998-1999 Andrzej Krzysztofowicz, Author and Maintainer * Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org> - * Copyright (C) 2003 Red Hat Inc <alan@redhat.com> + * Copyright (C) 2003 Red Hat Inc * * and drivers/ata/ahci.c: * Copyright 2004-2005 Red Hat, Inc. diff --git a/drivers/ata/pata_serverworks.c b/drivers/ata/pata_serverworks.c index ffd26d0dc50..72e41c9f969 100644 --- a/drivers/ata/pata_serverworks.c +++ b/drivers/ata/pata_serverworks.c @@ -1,7 +1,6 @@ /* * pata_serverworks.c - Serverworks PATA for new ATA layer * (C) 2005 Red Hat Inc - * Alan Cox <alan@redhat.com> * * based upon * diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c index a598bb36aaf..83580a59db5 100644 --- a/drivers/ata/pata_sil680.c +++ b/drivers/ata/pata_sil680.c @@ -1,7 +1,6 @@ /* * pata_sil680.c - SIL680 PATA for new ATA layer * (C) 2005 Red Hat Inc - * Alan Cox <alan@redhat.com> * * based upon * diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c index 26345d7b531..d3423661175 100644 --- a/drivers/ata/pata_sis.c +++ b/drivers/ata/pata_sis.c @@ -1,7 +1,7 @@ /* * pata_sis.c - SiS ATA driver * - * (C) 2005 Red Hat <alan@redhat.com> + * (C) 2005 Red Hat * (C) 2007 Bartlomiej Zolnierkiewicz * * Based upon linux/drivers/ide/pci/sis5513.c diff --git a/drivers/ata/pata_sl82c105.c b/drivers/ata/pata_sl82c105.c index 69877bd8181..1b0e7b6d8ef 100644 --- a/drivers/ata/pata_sl82c105.c +++ b/drivers/ata/pata_sl82c105.c @@ -1,7 +1,6 @@ /* * pata_sl82c105.c - SL82C105 PATA for new ATA layer * (C) 2005 Red Hat Inc - * Alan Cox <alan@redhat.com> * * Based in part on linux/drivers/ide/pci/sl82c105.c * SL82C105/Winbond 553 IDE driver diff --git a/drivers/ata/pata_triflex.c b/drivers/ata/pata_triflex.c index b181261f274..ef9597517cd 100644 --- a/drivers/ata/pata_triflex.c +++ b/drivers/ata/pata_triflex.c @@ -1,7 +1,7 @@ /* * pata_triflex.c - Compaq PATA for new ATA layer * (C) 2005 Red Hat Inc - * Alan Cox <alan@redhat.com> + * Alan Cox <alan@lxorguk.ukuu.org.uk> * * based upon * diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c index 8fdb2ce7321..681169c9c64 100644 --- a/drivers/ata/pata_via.c +++ b/drivers/ata/pata_via.c @@ -1,7 +1,6 @@ /* * pata_via.c - VIA PATA for new ATA layer * (C) 2005-2006 Red Hat Inc - * Alan Cox <alan@redhat.com> * * Documentation * Most chipset documentation available under NDA only diff --git a/drivers/ata/pata_winbond.c b/drivers/ata/pata_winbond.c index a7606b044a6..319e164a3d7 100644 --- a/drivers/ata/pata_winbond.c +++ b/drivers/ata/pata_winbond.c @@ -1,6 +1,6 @@ /* * pata_winbond.c - Winbond VLB ATA controllers - * (C) 2006 Red Hat <alan@redhat.com> + * (C) 2006 Red Hat * * Support for the Winbond 83759A when operating in advanced mode. * Multichip mode is not currently supported. diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c index fae3841de0d..6f146061432 100644 --- a/drivers/ata/sata_nv.c +++ b/drivers/ata/sata_nv.c @@ -307,10 +307,10 @@ static int nv_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val); static void nv_nf2_freeze(struct ata_port *ap); static void nv_nf2_thaw(struct ata_port *ap); +static int nv_nf2_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline); static void nv_ck804_freeze(struct ata_port *ap); static void nv_ck804_thaw(struct ata_port *ap); -static int nv_hardreset(struct ata_link *link, unsigned int *class, - unsigned long deadline); static int nv_adma_slave_config(struct scsi_device *sdev); static int nv_adma_check_atapi_dma(struct ata_queued_cmd *qc); static void nv_adma_qc_prep(struct ata_queued_cmd *qc); @@ -405,17 +405,8 @@ static struct scsi_host_template nv_swncq_sht = { .slave_configure = nv_swncq_slave_config, }; -/* OSDL bz3352 reports that some nv controllers can't determine device - * signature reliably and nv_hardreset is implemented to work around - * the problem. This was reported on nf3 and it's unclear whether any - * other controllers are affected. However, the workaround has been - * applied to all variants and there isn't much to gain by trying to - * find out exactly which ones are affected at this point especially - * because NV has moved over to ahci for newer controllers. - */ static struct ata_port_operations nv_common_ops = { .inherits = &ata_bmdma_port_ops, - .hardreset = nv_hardreset, .scr_read = nv_scr_read, .scr_write = nv_scr_write, }; @@ -429,12 +420,22 @@ static struct ata_port_operations nv_generic_ops = { .hardreset = ATA_OP_NULL, }; +/* OSDL bz3352 reports that nf2/3 controllers can't determine device + * signature reliably. Also, the following thread reports detection + * failure on cold boot with the standard debouncing timing. + * + * http://thread.gmane.org/gmane.linux.ide/34098 + * + * Debounce with hotplug timing and request follow-up SRST. + */ static struct ata_port_operations nv_nf2_ops = { .inherits = &nv_common_ops, .freeze = nv_nf2_freeze, .thaw = nv_nf2_thaw, + .hardreset = nv_nf2_hardreset, }; +/* CK804 finally gets hardreset right */ static struct ata_port_operations nv_ck804_ops = { .inherits = &nv_common_ops, .freeze = nv_ck804_freeze, @@ -443,7 +444,7 @@ static struct ata_port_operations nv_ck804_ops = { }; static struct ata_port_operations nv_adma_ops = { - .inherits = &nv_common_ops, + .inherits = &nv_ck804_ops, .check_atapi_dma = nv_adma_check_atapi_dma, .sff_tf_read = nv_adma_tf_read, @@ -467,7 +468,7 @@ static struct ata_port_operations nv_adma_ops = { }; static struct ata_port_operations nv_swncq_ops = { - .inherits = &nv_common_ops, + .inherits = &nv_generic_ops, .qc_defer = ata_std_qc_defer, .qc_prep = nv_swncq_qc_prep, @@ -1553,6 +1554,17 @@ static void nv_nf2_thaw(struct ata_port *ap) iowrite8(mask, scr_addr + NV_INT_ENABLE); } +static int nv_nf2_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + bool online; + int rc; + + rc = sata_link_hardreset(link, sata_deb_timing_hotplug, deadline, + &online, NULL); + return online ? -EAGAIN : rc; +} + static void nv_ck804_freeze(struct ata_port *ap) { void __iomem *mmio_base = ap->host->iomap[NV_MMIO_BAR]; @@ -1605,21 +1617,6 @@ static void nv_mcp55_thaw(struct ata_port *ap) ata_sff_thaw(ap); } -static int nv_hardreset(struct ata_link *link, unsigned int *class, - unsigned long deadline) -{ - int rc; - - /* SATA hardreset fails to retrieve proper device signature on - * some controllers. Request follow up SRST. For more info, - * see http://bugzilla.kernel.org/show_bug.cgi?id=3352 - */ - rc = sata_sff_hardreset(link, class, deadline); - if (rc) - return rc; - return -EAGAIN; -} - static void nv_adma_error_handler(struct ata_port *ap) { struct nv_adma_port_priv *pp = ap->private_data; diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c index 750d8cdc00c..ba9a2570a74 100644 --- a/drivers/ata/sata_promise.c +++ b/drivers/ata/sata_promise.c @@ -153,6 +153,10 @@ static void pdc_freeze(struct ata_port *ap); static void pdc_sata_freeze(struct ata_port *ap); static void pdc_thaw(struct ata_port *ap); static void pdc_sata_thaw(struct ata_port *ap); +static int pdc_pata_softreset(struct ata_link *link, unsigned int *class, + unsigned long deadline); +static int pdc_sata_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline); static void pdc_error_handler(struct ata_port *ap); static void pdc_post_internal_cmd(struct ata_queued_cmd *qc); static int pdc_pata_cable_detect(struct ata_port *ap); @@ -186,6 +190,7 @@ static struct ata_port_operations pdc_sata_ops = { .scr_read = pdc_sata_scr_read, .scr_write = pdc_sata_scr_write, .port_start = pdc_sata_port_start, + .hardreset = pdc_sata_hardreset, }; /* First-generation chips need a more restrictive ->check_atapi_dma op */ @@ -200,6 +205,7 @@ static struct ata_port_operations pdc_pata_ops = { .freeze = pdc_freeze, .thaw = pdc_thaw, .port_start = pdc_common_port_start, + .softreset = pdc_pata_softreset, }; static const struct ata_port_info pdc_port_info[] = { @@ -693,6 +699,20 @@ static void pdc_sata_thaw(struct ata_port *ap) readl(host_mmio + hotplug_offset); /* flush */ } +static int pdc_pata_softreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + pdc_reset_port(link->ap); + return ata_sff_softreset(link, class, deadline); +} + +static int pdc_sata_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + pdc_reset_port(link->ap); + return sata_sff_hardreset(link, class, deadline); +} + static void pdc_error_handler(struct ata_port *ap) { if (!(ap->pflags & ATA_PFLAG_FROZEN)) diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c index 4621807a1a6..ccee930f1e1 100644 --- a/drivers/ata/sata_sil24.c +++ b/drivers/ata/sata_sil24.c @@ -1329,6 +1329,11 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) } } + /* Set max read request size to 4096. This slightly increases + * write throughput for pci-e variants. + */ + pcie_set_readrq(pdev, 4096); + sil24_init_controller(host); pci_set_master(pdev); diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c index 5b72e734300..c18935f0bda 100644 --- a/drivers/ata/sata_via.c +++ b/drivers/ata/sata_via.c @@ -44,11 +44,16 @@ #include <linux/libata.h> #define DRV_NAME "sata_via" -#define DRV_VERSION "2.3" +#define DRV_VERSION "2.4" +/* + * vt8251 is different from other sata controllers of VIA. It has two + * channels, each channel has both Master and Slave slot. + */ enum board_ids_enum { vt6420, vt6421, + vt8251, }; enum { @@ -70,6 +75,8 @@ enum { static int svia_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); static int svia_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val); static int svia_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val); +static int vt8251_scr_read(struct ata_link *link, unsigned int scr, u32 *val); +static int vt8251_scr_write(struct ata_link *link, unsigned int scr, u32 val); static void svia_tf_load(struct ata_port *ap, const struct ata_taskfile *tf); static void svia_noop_freeze(struct ata_port *ap); static int vt6420_prereset(struct ata_link *link, unsigned long deadline); @@ -79,12 +86,12 @@ static void vt6421_set_dma_mode(struct ata_port *ap, struct ata_device *adev); static const struct pci_device_id svia_pci_tbl[] = { { PCI_VDEVICE(VIA, 0x5337), vt6420 }, - { PCI_VDEVICE(VIA, 0x0591), vt6420 }, - { PCI_VDEVICE(VIA, 0x3149), vt6420 }, - { PCI_VDEVICE(VIA, 0x3249), vt6421 }, - { PCI_VDEVICE(VIA, 0x5287), vt6420 }, + { PCI_VDEVICE(VIA, 0x0591), vt6420 }, /* 2 sata chnls (Master) */ + { PCI_VDEVICE(VIA, 0x3149), vt6420 }, /* 2 sata chnls (Master) */ + { PCI_VDEVICE(VIA, 0x3249), vt6421 }, /* 2 sata chnls, 1 pata chnl */ { PCI_VDEVICE(VIA, 0x5372), vt6420 }, { PCI_VDEVICE(VIA, 0x7372), vt6420 }, + { PCI_VDEVICE(VIA, 0x5287), vt8251 }, /* 2 sata chnls (Master/Slave) */ { } /* terminate list */ }; @@ -128,6 +135,13 @@ static struct ata_port_operations vt6421_sata_ops = { .scr_write = svia_scr_write, }; +static struct ata_port_operations vt8251_ops = { + .inherits = &svia_base_ops, + .hardreset = sata_std_hardreset, + .scr_read = vt8251_scr_read, + .scr_write = vt8251_scr_write, +}; + static const struct ata_port_info vt6420_port_info = { .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY, .pio_mask = 0x1f, @@ -152,6 +166,15 @@ static struct ata_port_info vt6421_pport_info = { .port_ops = &vt6421_pata_ops, }; +static struct ata_port_info vt8251_port_info = { + .flags = ATA_FLAG_SATA | ATA_FLAG_SLAVE_POSS | + ATA_FLAG_NO_LEGACY, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = ATA_UDMA6, + .port_ops = &vt8251_ops, +}; + MODULE_AUTHOR("Jeff Garzik"); MODULE_DESCRIPTION("SCSI low-level driver for VIA SATA controllers"); MODULE_LICENSE("GPL"); @@ -174,6 +197,83 @@ static int svia_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val) return 0; } +static int vt8251_scr_read(struct ata_link *link, unsigned int scr, u32 *val) +{ + static const u8 ipm_tbl[] = { 1, 2, 6, 0 }; + struct pci_dev *pdev = to_pci_dev(link->ap->host->dev); + int slot = 2 * link->ap->port_no + link->pmp; + u32 v = 0; + u8 raw; + + switch (scr) { + case SCR_STATUS: + pci_read_config_byte(pdev, 0xA0 + slot, &raw); + + /* read the DET field, bit0 and 1 of the config byte */ + v |= raw & 0x03; + + /* read the SPD field, bit4 of the configure byte */ + if (raw & (1 << 4)) + v |= 0x02 << 4; + else + v |= 0x01 << 4; + + /* read the IPM field, bit2 and 3 of the config byte */ + v |= ipm_tbl[(raw >> 2) & 0x3]; + break; + + case SCR_ERROR: + /* devices other than 5287 uses 0xA8 as base */ + WARN_ON(pdev->device != 0x5287); + pci_read_config_dword(pdev, 0xB0 + slot * 4, &v); + break; + + case SCR_CONTROL: + pci_read_config_byte(pdev, 0xA4 + slot, &raw); + + /* read the DET field, bit0 and bit1 */ + v |= ((raw & 0x02) << 1) | (raw & 0x01); + + /* read the IPM field, bit2 and bit3 */ + v |= ((raw >> 2) & 0x03) << 8; + break; + + default: + return -EINVAL; + } + + *val = v; + return 0; +} + +static int vt8251_scr_write(struct ata_link *link, unsigned int scr, u32 val) +{ + struct pci_dev *pdev = to_pci_dev(link->ap->host->dev); + int slot = 2 * link->ap->port_no + link->pmp; + u32 v = 0; + + switch (scr) { + case SCR_ERROR: + /* devices other than 5287 uses 0xA8 as base */ + WARN_ON(pdev->device != 0x5287); + pci_write_config_dword(pdev, 0xB0 + slot * 4, val); + return 0; + + case SCR_CONTROL: + /* set the DET field */ + v |= ((val & 0x4) >> 1) | (val & 0x1); + + /* set the IPM field */ + v |= ((val >> 8) & 0x3) << 2; + + pci_write_config_byte(pdev, 0xA4 + slot, v); + return 0; + + default: + return -EINVAL; + } +} + /** * svia_tf_load - send taskfile registers to host controller * @ap: Port to which output is sent @@ -396,6 +496,30 @@ static int vt6421_prepare_host(struct pci_dev *pdev, struct ata_host **r_host) return 0; } +static int vt8251_prepare_host(struct pci_dev *pdev, struct ata_host **r_host) +{ + const struct ata_port_info *ppi[] = { &vt8251_port_info, NULL }; + struct ata_host *host; + int i, rc; + + rc = ata_pci_sff_prepare_host(pdev, ppi, &host); + if (rc) + return rc; + *r_host = host; + + rc = pcim_iomap_regions(pdev, 1 << 5, DRV_NAME); + if (rc) { + dev_printk(KERN_ERR, &pdev->dev, "failed to iomap PCI BAR 5\n"); + return rc; + } + + /* 8251 hosts four sata ports as M/S of the two channels */ + for (i = 0; i < host->n_ports; i++) + ata_slave_link_init(host->ports[i]); + + return 0; +} + static void svia_configure(struct pci_dev *pdev) { u8 tmp8; @@ -451,10 +575,10 @@ static int svia_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) if (rc) return rc; - if (board_id == vt6420) - bar_sizes = &svia_bar_sizes[0]; - else + if (board_id == vt6421) bar_sizes = &vt6421_bar_sizes[0]; + else + bar_sizes = &svia_bar_sizes[0]; for (i = 0; i < ARRAY_SIZE(svia_bar_sizes); i++) if ((pci_resource_start(pdev, i) == 0) || @@ -467,10 +591,19 @@ static int svia_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) return -ENODEV; } - if (board_id == vt6420) + switch (board_id) { + case vt6420: rc = vt6420_prepare_host(pdev, &host); - else + break; + case vt6421: rc = vt6421_prepare_host(pdev, &host); + break; + case vt8251: + rc = vt8251_prepare_host(pdev, &host); + break; + default: + rc = -EINVAL; + } if (rc) return rc; diff --git a/drivers/base/sys.c b/drivers/base/sys.c index 75dd6e22faf..c98c31ec2f7 100644 --- a/drivers/base/sys.c +++ b/drivers/base/sys.c @@ -355,7 +355,7 @@ static void __sysdev_resume(struct sys_device *dev) * sysdev_suspend - Suspend all system devices. * @state: Power state to enter. * - * We perform an almost identical operation as sys_device_shutdown() + * We perform an almost identical operation as sysdev_shutdown() * above, though calling ->suspend() instead. Interrupts are disabled * when this called. Devices are responsible for both saving state and * quiescing or powering down the device. @@ -437,7 +437,7 @@ aux_driver: /** * sysdev_resume - Bring system devices back to life. * - * Similar to sys_device_suspend(), but we iterate the list forwards + * Similar to sysdev_suspend(), but we iterate the list forwards * to guarantee that parent devices are resumed before their children. * * Note: Interrupts are disabled when called. @@ -488,7 +488,8 @@ ssize_t sysdev_store_ulong(struct sys_device *sysdev, if (end == buf) return -EINVAL; *(unsigned long *)(ea->var) = new; - return end - buf; + /* Always return full write size even if we didn't consume all */ + return size; } EXPORT_SYMBOL_GPL(sysdev_store_ulong); @@ -511,7 +512,8 @@ ssize_t sysdev_store_int(struct sys_device *sysdev, if (end == buf || new > INT_MAX || new < INT_MIN) return -EINVAL; *(int *)(ea->var) = new; - return end - buf; + /* Always return full write size even if we didn't consume all */ + return size; } EXPORT_SYMBOL_GPL(sysdev_store_int); diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index 4023885353e..12de1fdaa6c 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -96,6 +96,8 @@ static const struct pci_device_id cciss_pci_device_id[] = { {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3245}, {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3247}, {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3249}, + {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x324A}, + {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x324B}, {PCI_VENDOR_ID_HP, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_RAID << 8, 0xffff << 8, 0}, {0,} @@ -133,6 +135,8 @@ static struct board_type products[] = { {0x3245103C, "Smart Array P410i", &SA5_access}, {0x3247103C, "Smart Array P411", &SA5_access}, {0x3249103C, "Smart Array P812", &SA5_access}, + {0x324A103C, "Smart Array P712m", &SA5_access}, + {0x324B103C, "Smart Array P711m", &SA5_access}, {0xFFFF103C, "Unknown Smart Array", &SA5_access}, }; @@ -1366,6 +1370,7 @@ static void cciss_add_disk(ctlr_info_t *h, struct gendisk *disk, disk->first_minor = drv_index << NWD_SHIFT; disk->fops = &cciss_fops; disk->private_data = &h->drv[drv_index]; + disk->driverfs_dev = &h->pdev->dev; /* Set up queue information */ blk_queue_bounce_limit(disk->queue, h->pdev->dma_mask); @@ -3404,7 +3409,8 @@ static int __devinit cciss_init_one(struct pci_dev *pdev, int i; int j = 0; int rc; - int dac; + int dac, return_code; + InquiryData_struct *inq_buff = NULL; i = alloc_cciss_hba(); if (i < 0) @@ -3510,6 +3516,25 @@ static int __devinit cciss_init_one(struct pci_dev *pdev, /* Turn the interrupts on so we can service requests */ hba[i]->access.set_intr_mask(hba[i], CCISS_INTR_ON); + /* Get the firmware version */ + inq_buff = kzalloc(sizeof(InquiryData_struct), GFP_KERNEL); + if (inq_buff == NULL) { + printk(KERN_ERR "cciss: out of memory\n"); + goto clean4; + } + + return_code = sendcmd_withirq(CISS_INQUIRY, i, inq_buff, + sizeof(InquiryData_struct), 0, 0 , 0, TYPE_CMD); + if (return_code == IO_OK) { + hba[i]->firm_ver[0] = inq_buff->data_byte[32]; + hba[i]->firm_ver[1] = inq_buff->data_byte[33]; + hba[i]->firm_ver[2] = inq_buff->data_byte[34]; + hba[i]->firm_ver[3] = inq_buff->data_byte[35]; + } else { /* send command failed */ + printk(KERN_WARNING "cciss: unable to determine firmware" + " version of controller\n"); + } + cciss_procinit(i); hba[i]->cciss_max_sectors = 2048; @@ -3520,6 +3545,7 @@ static int __devinit cciss_init_one(struct pci_dev *pdev, return 1; clean4: + kfree(inq_buff); #ifdef CONFIG_CISS_SCSI_TAPE kfree(hba[i]->scsi_rejects.complete); #endif diff --git a/drivers/block/cpqarray.c b/drivers/block/cpqarray.c index 47d233c6d0b..5d39df14ed9 100644 --- a/drivers/block/cpqarray.c +++ b/drivers/block/cpqarray.c @@ -567,7 +567,12 @@ static int __init cpqarray_init(void) num_cntlrs_reg++; } - return(num_cntlrs_reg); + if (num_cntlrs_reg) + return 0; + else { + pci_unregister_driver(&cpqarray_pci_driver); + return -ENODEV; + } } /* Function to find the first free pointer into our hba[] array */ diff --git a/drivers/block/loop.c b/drivers/block/loop.c index 3f09cd8bcc3..5c4ee70d5cf 100644 --- a/drivers/block/loop.c +++ b/drivers/block/loop.c @@ -40,8 +40,7 @@ * Heinz Mauelshagen <mge@sistina.com>, Feb 2002 * * Support for falling back on the write file operation when the address space - * operations prepare_write and/or commit_write are not available on the - * backing filesystem. + * operations write_begin is not available on the backing filesystem. * Anton Altaparmakov, 16 Feb 2005 * * Still To Fix: @@ -765,7 +764,7 @@ static int loop_set_fd(struct loop_device *lo, fmode_t mode, */ if (!file->f_op->splice_read) goto out_putf; - if (aops->prepare_write || aops->write_begin) + if (aops->write_begin) lo_flags |= LO_FLAGS_USE_AOPS; if (!(lo_flags & LO_FLAGS_USE_AOPS) && !file->f_op->write) lo_flags |= LO_FLAGS_READ_ONLY; diff --git a/drivers/bluetooth/bluecard_cs.c b/drivers/bluetooth/bluecard_cs.c index e6ee21d99d9..b0e569ba730 100644 --- a/drivers/bluetooth/bluecard_cs.c +++ b/drivers/bluetooth/bluecard_cs.c @@ -867,7 +867,7 @@ static int bluecard_probe(struct pcmcia_device *link) link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; link->io.NumPorts1 = 8; - link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT; + link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT; link->irq.IRQInfo1 = IRQ_LEVEL_ID; link->irq.Handler = bluecard_interrupt; diff --git a/drivers/bluetooth/bpa10x.c b/drivers/bluetooth/bpa10x.c index 32f3a8ed8d3..b936d8ce272 100644 --- a/drivers/bluetooth/bpa10x.c +++ b/drivers/bluetooth/bpa10x.c @@ -443,8 +443,8 @@ static void bpa10x_destruct(struct hci_dev *hdev) BT_DBG("%s", hdev->name); - kfree(data->rx_skb[0]); - kfree(data->rx_skb[1]); + kfree_skb(data->rx_skb[0]); + kfree_skb(data->rx_skb[1]); kfree(data); } diff --git a/drivers/bluetooth/bt3c_cs.c b/drivers/bluetooth/bt3c_cs.c index 2cbe70b6647..b3e4d07a4ac 100644 --- a/drivers/bluetooth/bt3c_cs.c +++ b/drivers/bluetooth/bt3c_cs.c @@ -343,6 +343,7 @@ static irqreturn_t bt3c_interrupt(int irq, void *dev_inst) bt3c_info_t *info = dev_inst; unsigned int iobase; int iir; + irqreturn_t r = IRQ_NONE; BUG_ON(!info->hdev); @@ -374,11 +375,12 @@ static irqreturn_t bt3c_interrupt(int irq, void *dev_inst) outb(iir, iobase + CONTROL); } + r = IRQ_HANDLED; } spin_unlock(&(info->lock)); - return IRQ_HANDLED; + return r; } @@ -657,7 +659,7 @@ static int bt3c_probe(struct pcmcia_device *link) link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; link->io.NumPorts1 = 8; - link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT; + link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT; link->irq.IRQInfo1 = IRQ_LEVEL_ID; link->irq.Handler = bt3c_interrupt; diff --git a/drivers/bluetooth/btsdio.c b/drivers/bluetooth/btsdio.c index 58630cc1eff..cda6c7cc944 100644 --- a/drivers/bluetooth/btsdio.c +++ b/drivers/bluetooth/btsdio.c @@ -152,7 +152,7 @@ static int btsdio_rx_packet(struct btsdio_data *data) err = sdio_readsb(data->func, skb->data, REG_RDAT, len - 4); if (err < 0) { - kfree(skb); + kfree_skb(skb); return err; } diff --git a/drivers/bluetooth/btuart_cs.c b/drivers/bluetooth/btuart_cs.c index 8e556b7ff9f..efd689a062e 100644 --- a/drivers/bluetooth/btuart_cs.c +++ b/drivers/bluetooth/btuart_cs.c @@ -293,6 +293,7 @@ static irqreturn_t btuart_interrupt(int irq, void *dev_inst) unsigned int iobase; int boguscount = 0; int iir, lsr; + irqreturn_t r = IRQ_NONE; BUG_ON(!info->hdev); @@ -302,6 +303,7 @@ static irqreturn_t btuart_interrupt(int irq, void *dev_inst) iir = inb(iobase + UART_IIR) & UART_IIR_ID; while (iir) { + r = IRQ_HANDLED; /* Clear interrupt */ lsr = inb(iobase + UART_LSR); @@ -335,7 +337,7 @@ static irqreturn_t btuart_interrupt(int irq, void *dev_inst) spin_unlock(&(info->lock)); - return IRQ_HANDLED; + return r; } @@ -586,7 +588,7 @@ static int btuart_probe(struct pcmcia_device *link) link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; link->io.NumPorts1 = 8; - link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT; + link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT; link->irq.IRQInfo1 = IRQ_LEVEL_ID; link->irq.Handler = btuart_interrupt; diff --git a/drivers/bluetooth/dtl1_cs.c b/drivers/bluetooth/dtl1_cs.c index e6e6b037695..901bdd95655 100644 --- a/drivers/bluetooth/dtl1_cs.c +++ b/drivers/bluetooth/dtl1_cs.c @@ -297,6 +297,7 @@ static irqreturn_t dtl1_interrupt(int irq, void *dev_inst) unsigned char msr; int boguscount = 0; int iir, lsr; + irqreturn_t r = IRQ_NONE; BUG_ON(!info->hdev); @@ -307,6 +308,7 @@ static irqreturn_t dtl1_interrupt(int irq, void *dev_inst) iir = inb(iobase + UART_IIR) & UART_IIR_ID; while (iir) { + r = IRQ_HANDLED; /* Clear interrupt */ lsr = inb(iobase + UART_LSR); @@ -343,11 +345,12 @@ static irqreturn_t dtl1_interrupt(int irq, void *dev_inst) info->ri_latch = msr & UART_MSR_RI; clear_bit(XMIT_WAITING, &(info->tx_state)); dtl1_write_wakeup(info); + r = IRQ_HANDLED; } spin_unlock(&(info->lock)); - return IRQ_HANDLED; + return r; } @@ -568,7 +571,7 @@ static int dtl1_probe(struct pcmcia_device *link) link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; link->io.NumPorts1 = 8; - link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT; + link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT; link->irq.IRQInfo1 = IRQ_LEVEL_ID; link->irq.Handler = dtl1_interrupt; diff --git a/drivers/cdrom/gdrom.c b/drivers/cdrom/gdrom.c index 9aaa86b232b..2eecb779437 100644 --- a/drivers/cdrom/gdrom.c +++ b/drivers/cdrom/gdrom.c @@ -495,9 +495,10 @@ static int gdrom_bdops_open(struct block_device *bdev, fmode_t mode) return cdrom_open(gd.cd_info, bdev, mode); } -static int gdrom_bdops_release(struct block_device *bdev, fmode_t mode) +static int gdrom_bdops_release(struct gendisk *disk, fmode_t mode) { - return cdrom_release(gd.cd_info, mode); + cdrom_release(gd.cd_info, mode); + return 0; } static int gdrom_bdops_mediachanged(struct gendisk *disk) diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index 122254155ae..43b35d0369d 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -812,28 +812,6 @@ config JS_RTC To compile this driver as a module, choose M here: the module will be called js-rtc. -config SGI_DS1286 - tristate "SGI DS1286 RTC support" - depends on SGI_HAS_DS1286 - help - If you say Y here and create a character special file /dev/rtc with - major number 10 and minor number 135 using mknod ("man mknod"), you - will get access to the real time clock built into your computer. - Every SGI has such a clock built in. It reports status information - via the file /proc/rtc and its behaviour is set by various ioctls on - /dev/rtc. - -config SGI_IP27_RTC - bool "SGI M48T35 RTC support" - depends on SGI_IP27 - help - If you say Y here and create a character special file /dev/rtc with - major number 10 and minor number 135 using mknod ("man mknod"), you - will get access to the real time clock built into your computer. - Every SGI has such a clock built in. It reports status information - via the file /proc/rtc and its behaviour is set by various ioctls on - /dev/rtc. - config GEN_RTC tristate "Generic /dev/rtc emulation" depends on RTC!=y && !IA64 && !ARM && !M32R && !MIPS && !SPARC && !FRV && !S390 && !SUPERH && !AVR32 diff --git a/drivers/char/Makefile b/drivers/char/Makefile index 1a4247dccac..438f71317c5 100644 --- a/drivers/char/Makefile +++ b/drivers/char/Makefile @@ -74,8 +74,6 @@ obj-$(CONFIG_RTC) += rtc.o obj-$(CONFIG_HPET) += hpet.o obj-$(CONFIG_GEN_RTC) += genrtc.o obj-$(CONFIG_EFI_RTC) += efirtc.o -obj-$(CONFIG_SGI_DS1286) += ds1286.o -obj-$(CONFIG_SGI_IP27_RTC) += ip27-rtc.o obj-$(CONFIG_DS1302) += ds1302.o obj-$(CONFIG_XILINX_HWICAP) += xilinx_hwicap/ ifeq ($(CONFIG_GENERIC_NVRAM),y) diff --git a/drivers/char/ds1286.c b/drivers/char/ds1286.c deleted file mode 100644 index 0a826d7be10..00000000000 --- a/drivers/char/ds1286.c +++ /dev/null @@ -1,585 +0,0 @@ -/* - * DS1286 Real Time Clock interface for Linux - * - * Copyright (C) 1998, 1999, 2000 Ralf Baechle - * - * Based on code written by Paul Gortmaker. - * - * This driver allows use of the real time clock (built into nearly all - * computers) from user space. It exports the /dev/rtc interface supporting - * various ioctl() and also the /proc/rtc pseudo-file for status - * information. - * - * The ioctls can be used to set the interrupt behaviour and generation rate - * from the RTC via IRQ 8. Then the /dev/rtc interface can be used to make - * use of these timer interrupts, be they interval or alarm based. - * - * The /dev/rtc interface will block on reads until an interrupt has been - * received. If a RTC interrupt has already happened, it will output an - * unsigned long and then block. The output value contains the interrupt - * status in the low byte and the number of interrupts since the last read - * in the remaining high bytes. The /dev/rtc interface can also be used with - * the select(2) call. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#include <linux/ds1286.h> -#include <linux/smp_lock.h> -#include <linux/types.h> -#include <linux/errno.h> -#include <linux/miscdevice.h> -#include <linux/slab.h> -#include <linux/ioport.h> -#include <linux/fcntl.h> -#include <linux/init.h> -#include <linux/poll.h> -#include <linux/rtc.h> -#include <linux/spinlock.h> -#include <linux/bcd.h> -#include <linux/proc_fs.h> -#include <linux/jiffies.h> - -#include <asm/uaccess.h> -#include <asm/system.h> - -#define DS1286_VERSION "1.0" - -/* - * We sponge a minor off of the misc major. No need slurping - * up another valuable major dev number for this. If you add - * an ioctl, make sure you don't conflict with SPARC's RTC - * ioctls. - */ - -static DECLARE_WAIT_QUEUE_HEAD(ds1286_wait); - -static ssize_t ds1286_read(struct file *file, char *buf, - size_t count, loff_t *ppos); - -static int ds1286_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg); - -static unsigned int ds1286_poll(struct file *file, poll_table *wait); - -static void ds1286_get_alm_time (struct rtc_time *alm_tm); -static void ds1286_get_time(struct rtc_time *rtc_tm); -static int ds1286_set_time(struct rtc_time *rtc_tm); - -static inline unsigned char ds1286_is_updating(void); - -static DEFINE_SPINLOCK(ds1286_lock); - -static int ds1286_read_proc(char *page, char **start, off_t off, - int count, int *eof, void *data); - -/* - * Bits in rtc_status. (7 bits of room for future expansion) - */ - -#define RTC_IS_OPEN 0x01 /* means /dev/rtc is in use */ -#define RTC_TIMER_ON 0x02 /* missed irq timer active */ - -static unsigned char ds1286_status; /* bitmapped status byte. */ - -static unsigned char days_in_mo[] = { - 0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 -}; - -/* - * Now all the various file operations that we export. - */ - -static ssize_t ds1286_read(struct file *file, char *buf, - size_t count, loff_t *ppos) -{ - return -EIO; -} - -static int ds1286_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) -{ - struct rtc_time wtime; - - switch (cmd) { - case RTC_AIE_OFF: /* Mask alarm int. enab. bit */ - { - unsigned long flags; - unsigned char val; - - if (!capable(CAP_SYS_TIME)) - return -EACCES; - - spin_lock_irqsave(&ds1286_lock, flags); - val = rtc_read(RTC_CMD); - val |= RTC_TDM; - rtc_write(val, RTC_CMD); - spin_unlock_irqrestore(&ds1286_lock, flags); - - return 0; - } - case RTC_AIE_ON: /* Allow alarm interrupts. */ - { - unsigned long flags; - unsigned char val; - - if (!capable(CAP_SYS_TIME)) - return -EACCES; - - spin_lock_irqsave(&ds1286_lock, flags); - val = rtc_read(RTC_CMD); - val &= ~RTC_TDM; - rtc_write(val, RTC_CMD); - spin_unlock_irqrestore(&ds1286_lock, flags); - - return 0; - } - case RTC_WIE_OFF: /* Mask watchdog int. enab. bit */ - { - unsigned long flags; - unsigned char val; - - if (!capable(CAP_SYS_TIME)) - return -EACCES; - - spin_lock_irqsave(&ds1286_lock, flags); - val = rtc_read(RTC_CMD); - val |= RTC_WAM; - rtc_write(val, RTC_CMD); - spin_unlock_irqrestore(&ds1286_lock, flags); - - return 0; - } - case RTC_WIE_ON: /* Allow watchdog interrupts. */ - { - unsigned long flags; - unsigned char val; - - if (!capable(CAP_SYS_TIME)) - return -EACCES; - - spin_lock_irqsave(&ds1286_lock, flags); - val = rtc_read(RTC_CMD); - val &= ~RTC_WAM; - rtc_write(val, RTC_CMD); - spin_unlock_irqrestore(&ds1286_lock, flags); - - return 0; - } - case RTC_ALM_READ: /* Read the present alarm time */ - { - /* - * This returns a struct rtc_time. Reading >= 0xc0 - * means "don't care" or "match all". Only the tm_hour, - * tm_min, and tm_sec values are filled in. - */ - - memset(&wtime, 0, sizeof(wtime)); - ds1286_get_alm_time(&wtime); - break; - } - case RTC_ALM_SET: /* Store a time into the alarm */ - { - /* - * This expects a struct rtc_time. Writing 0xff means - * "don't care" or "match all". Only the tm_hour, - * tm_min and tm_sec are used. - */ - unsigned char hrs, min, sec; - struct rtc_time alm_tm; - - if (!capable(CAP_SYS_TIME)) - return -EACCES; - - if (copy_from_user(&alm_tm, (struct rtc_time*)arg, - sizeof(struct rtc_time))) - return -EFAULT; - - hrs = alm_tm.tm_hour; - min = alm_tm.tm_min; - sec = alm_tm.tm_sec; - - if (hrs >= 24) - hrs = 0xff; - - if (min >= 60) - min = 0xff; - - if (sec != 0) - return -EINVAL; - - min = bin2bcd(min); - min = bin2bcd(hrs); - - spin_lock(&ds1286_lock); - rtc_write(hrs, RTC_HOURS_ALARM); - rtc_write(min, RTC_MINUTES_ALARM); - spin_unlock(&ds1286_lock); - - return 0; - } - case RTC_RD_TIME: /* Read the time/date from RTC */ - { - memset(&wtime, 0, sizeof(wtime)); - ds1286_get_time(&wtime); - break; - } - case RTC_SET_TIME: /* Set the RTC */ - { - struct rtc_time rtc_tm; - - if (!capable(CAP_SYS_TIME)) - return -EACCES; - - if (copy_from_user(&rtc_tm, (struct rtc_time*)arg, - sizeof(struct rtc_time))) - return -EFAULT; - - return ds1286_set_time(&rtc_tm); - } - default: - return -EINVAL; - } - return copy_to_user((void *)arg, &wtime, sizeof wtime) ? -EFAULT : 0; -} - -/* - * We enforce only one user at a time here with the open/close. - * Also clear the previous interrupt data on an open, and clean - * up things on a close. - */ - -static int ds1286_open(struct inode *inode, struct file *file) -{ - lock_kernel(); - spin_lock_irq(&ds1286_lock); - - if (ds1286_status & RTC_IS_OPEN) - goto out_busy; - - ds1286_status |= RTC_IS_OPEN; - - spin_unlock_irq(&ds1286_lock); - unlock_kernel(); - return 0; - -out_busy: - spin_lock_irq(&ds1286_lock); - unlock_kernel(); - return -EBUSY; -} - -static int ds1286_release(struct inode *inode, struct file *file) -{ - ds1286_status &= ~RTC_IS_OPEN; - - return 0; -} - -static unsigned int ds1286_poll(struct file *file, poll_table *wait) -{ - poll_wait(file, &ds1286_wait, wait); - - return 0; -} - -/* - * The various file operations we support. - */ - -static const struct file_operations ds1286_fops = { - .llseek = no_llseek, - .read = ds1286_read, - .poll = ds1286_poll, - .ioctl = ds1286_ioctl, - .open = ds1286_open, - .release = ds1286_release, -}; - -static struct miscdevice ds1286_dev= -{ - .minor = RTC_MINOR, - .name = "rtc", - .fops = &ds1286_fops, -}; - -static int __init ds1286_init(void) -{ - int err; - - printk(KERN_INFO "DS1286 Real Time Clock Driver v%s\n", DS1286_VERSION); - - err = misc_register(&ds1286_dev); - if (err) - goto out; - - if (!create_proc_read_entry("driver/rtc", 0, 0, ds1286_read_proc, NULL)) { - err = -ENOMEM; - - goto out_deregister; - } - - return 0; - -out_deregister: - misc_deregister(&ds1286_dev); - -out: - return err; -} - -static void __exit ds1286_exit(void) -{ - remove_proc_entry("driver/rtc", NULL); - misc_deregister(&ds1286_dev); -} - -static char *days[] = { - "***", "Sun", "Mon", "Tue", "Wed", "Thu", "Fri", "Sat" -}; - -/* - * Info exported via "/proc/rtc". - */ -static int ds1286_proc_output(char *buf) -{ - char *p, *s; - struct rtc_time tm; - unsigned char hundredth, month, cmd, amode; - - p = buf; - - ds1286_get_time(&tm); - hundredth = rtc_read(RTC_HUNDREDTH_SECOND); - hundredth = bcd2bin(hundredth); - - p += sprintf(p, - "rtc_time\t: %02d:%02d:%02d.%02d\n" - "rtc_date\t: %04d-%02d-%02d\n", - tm.tm_hour, tm.tm_min, tm.tm_sec, hundredth, - tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday); - - /* - * We implicitly assume 24hr mode here. Alarm values >= 0xc0 will - * match any value for that particular field. Values that are - * greater than a valid time, but less than 0xc0 shouldn't appear. - */ - ds1286_get_alm_time(&tm); - p += sprintf(p, "alarm\t\t: %s ", days[tm.tm_wday]); - if (tm.tm_hour <= 24) - p += sprintf(p, "%02d:", tm.tm_hour); - else - p += sprintf(p, "**:"); - - if (tm.tm_min <= 59) - p += sprintf(p, "%02d\n", tm.tm_min); - else - p += sprintf(p, "**\n"); - - month = rtc_read(RTC_MONTH); - p += sprintf(p, - "oscillator\t: %s\n" - "square_wave\t: %s\n", - (month & RTC_EOSC) ? "disabled" : "enabled", - (month & RTC_ESQW) ? "disabled" : "enabled"); - - amode = ((rtc_read(RTC_MINUTES_ALARM) & 0x80) >> 5) | - ((rtc_read(RTC_HOURS_ALARM) & 0x80) >> 6) | - ((rtc_read(RTC_DAY_ALARM) & 0x80) >> 7); - if (amode == 7) s = "each minute"; - else if (amode == 3) s = "minutes match"; - else if (amode == 1) s = "hours and minutes match"; - else if (amode == 0) s = "days, hours and minutes match"; - else s = "invalid"; - p += sprintf(p, "alarm_mode\t: %s\n", s); - - cmd = rtc_read(RTC_CMD); - p += sprintf(p, - "alarm_enable\t: %s\n" - "wdog_alarm\t: %s\n" - "alarm_mask\t: %s\n" - "wdog_alarm_mask\t: %s\n" - "interrupt_mode\t: %s\n" - "INTB_mode\t: %s_active\n" - "interrupt_pins\t: %s\n", - (cmd & RTC_TDF) ? "yes" : "no", - (cmd & RTC_WAF) ? "yes" : "no", - (cmd & RTC_TDM) ? "disabled" : "enabled", - (cmd & RTC_WAM) ? "disabled" : "enabled", - (cmd & RTC_PU_LVL) ? "pulse" : "level", - (cmd & RTC_IBH_LO) ? "low" : "high", - (cmd & RTC_IPSW) ? "unswapped" : "swapped"); - - return p - buf; -} - -static int ds1286_read_proc(char *page, char **start, off_t off, - int count, int *eof, void *data) -{ - int len = ds1286_proc_output (page); - if (len <= off+count) *eof = 1; - *start = page + off; - len -= off; - if (len>count) - len = count; - if (len<0) - len = 0; - - return len; -} - -/* - * Returns true if a clock update is in progress - */ -static inline unsigned char ds1286_is_updating(void) -{ - return rtc_read(RTC_CMD) & RTC_TE; -} - - -static void ds1286_get_time(struct rtc_time *rtc_tm) -{ - unsigned char save_control; - unsigned long flags; - - /* - * read RTC once any update in progress is done. The update - * can take just over 2ms. We wait 10 to 20ms. There is no need to - * to poll-wait (up to 1s - eeccch) for the falling edge of RTC_UIP. - * If you need to know *exactly* when a second has started, enable - * periodic update complete interrupts, (via ioctl) and then - * immediately read /dev/rtc which will block until you get the IRQ. - * Once the read clears, read the RTC time (again via ioctl). Easy. - */ - - if (ds1286_is_updating() != 0) - msleep(20); - - /* - * Only the values that we read from the RTC are set. We leave - * tm_wday, tm_yday and tm_isdst untouched. Even though the - * RTC has RTC_DAY_OF_WEEK, we ignore it, as it is only updated - * by the RTC when initially set to a non-zero value. - */ - spin_lock_irqsave(&ds1286_lock, flags); - save_control = rtc_read(RTC_CMD); - rtc_write((save_control|RTC_TE), RTC_CMD); - - rtc_tm->tm_sec = rtc_read(RTC_SECONDS); - rtc_tm->tm_min = rtc_read(RTC_MINUTES); - rtc_tm->tm_hour = rtc_read(RTC_HOURS) & 0x3f; - rtc_tm->tm_mday = rtc_read(RTC_DATE); - rtc_tm->tm_mon = rtc_read(RTC_MONTH) & 0x1f; - rtc_tm->tm_year = rtc_read(RTC_YEAR); - - rtc_write(save_control, RTC_CMD); - spin_unlock_irqrestore(&ds1286_lock, flags); - - rtc_tm->tm_sec = bcd2bin(rtc_tm->tm_sec); - rtc_tm->tm_min = bcd2bin(rtc_tm->tm_min); - rtc_tm->tm_hour = bcd2bin(rtc_tm->tm_hour); - rtc_tm->tm_mday = bcd2bin(rtc_tm->tm_mday); - rtc_tm->tm_mon = bcd2bin(rtc_tm->tm_mon); - rtc_tm->tm_year = bcd2bin(rtc_tm->tm_year); - - /* - * Account for differences between how the RTC uses the values - * and how they are defined in a struct rtc_time; - */ - if (rtc_tm->tm_year < 45) - rtc_tm->tm_year += 30; - if ((rtc_tm->tm_year += 40) < 70) - rtc_tm->tm_year += 100; - - rtc_tm->tm_mon--; -} - -static int ds1286_set_time(struct rtc_time *rtc_tm) -{ - unsigned char mon, day, hrs, min, sec, leap_yr; - unsigned char save_control; - unsigned int yrs; - unsigned long flags; - - - yrs = rtc_tm->tm_year + 1900; - mon = rtc_tm->tm_mon + 1; /* tm_mon starts at zero */ - day = rtc_tm->tm_mday; - hrs = rtc_tm->tm_hour; - min = rtc_tm->tm_min; - sec = rtc_tm->tm_sec; - - if (yrs < 1970) - return -EINVAL; - - leap_yr = ((!(yrs % 4) && (yrs % 100)) || !(yrs % 400)); - - if ((mon > 12) || (day == 0)) - return -EINVAL; - - if (day > (days_in_mo[mon] + ((mon == 2) && leap_yr))) - return -EINVAL; - - if ((hrs >= 24) || (min >= 60) || (sec >= 60)) - return -EINVAL; - - if ((yrs -= 1940) > 255) /* They are unsigned */ - return -EINVAL; - - if (yrs >= 100) - yrs -= 100; - - sec = bin2bcd(sec); - min = bin2bcd(min); - hrs = bin2bcd(hrs); - day = bin2bcd(day); - mon = bin2bcd(mon); - yrs = bin2bcd(yrs); - - spin_lock_irqsave(&ds1286_lock, flags); - save_control = rtc_read(RTC_CMD); - rtc_write((save_control|RTC_TE), RTC_CMD); - - rtc_write(yrs, RTC_YEAR); - rtc_write(mon, RTC_MONTH); - rtc_write(day, RTC_DATE); - rtc_write(hrs, RTC_HOURS); - rtc_write(min, RTC_MINUTES); - rtc_write(sec, RTC_SECONDS); - rtc_write(0, RTC_HUNDREDTH_SECOND); - - rtc_write(save_control, RTC_CMD); - spin_unlock_irqrestore(&ds1286_lock, flags); - - return 0; -} - -static void ds1286_get_alm_time(struct rtc_time *alm_tm) -{ - unsigned char cmd; - unsigned long flags; - - /* - * Only the values that we read from the RTC are set. That - * means only tm_wday, tm_hour, tm_min. - */ - spin_lock_irqsave(&ds1286_lock, flags); - alm_tm->tm_min = rtc_read(RTC_MINUTES_ALARM) & 0x7f; - alm_tm->tm_hour = rtc_read(RTC_HOURS_ALARM) & 0x1f; - alm_tm->tm_wday = rtc_read(RTC_DAY_ALARM) & 0x07; - cmd = rtc_read(RTC_CMD); - spin_unlock_irqrestore(&ds1286_lock, flags); - - alm_tm->tm_min = bcd2bin(alm_tm->tm_min); - alm_tm->tm_hour = bcd2bin(alm_tm->tm_hour); - alm_tm->tm_sec = 0; -} - -module_init(ds1286_init); -module_exit(ds1286_exit); - -MODULE_AUTHOR("Ralf Baechle"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS_MISCDEV(RTC_MINOR); diff --git a/drivers/char/hpet.c b/drivers/char/hpet.c index 408f5f92cb4..53fdc7ff387 100644 --- a/drivers/char/hpet.c +++ b/drivers/char/hpet.c @@ -427,9 +427,6 @@ static int hpet_release(struct inode *inode, struct file *file) if (irq) free_irq(irq, devp); - if (file->f_flags & FASYNC) - hpet_fasync(-1, file, 0); - file->private_data = NULL; return 0; } diff --git a/drivers/char/hw_random/amd-rng.c b/drivers/char/hw_random/amd-rng.c index c422e870dc5..cd0ba51f7c8 100644 --- a/drivers/char/hw_random/amd-rng.c +++ b/drivers/char/hw_random/amd-rng.c @@ -11,7 +11,7 @@ * derived from * * Hardware driver for the AMD 768 Random Number Generator (RNG) - * (c) Copyright 2001 Red Hat Inc <alan@redhat.com> + * (c) Copyright 2001 Red Hat Inc * * derived from * diff --git a/drivers/char/hw_random/geode-rng.c b/drivers/char/hw_random/geode-rng.c index fed4ef5569f..64d513f6836 100644 --- a/drivers/char/hw_random/geode-rng.c +++ b/drivers/char/hw_random/geode-rng.c @@ -11,7 +11,7 @@ * derived from * * Hardware driver for the AMD 768 Random Number Generator (RNG) - * (c) Copyright 2001 Red Hat Inc <alan@redhat.com> + * (c) Copyright 2001 Red Hat Inc * * derived from * diff --git a/drivers/char/hw_random/intel-rng.c b/drivers/char/hw_random/intel-rng.c index 8a2fce0756e..5dcbe603eca 100644 --- a/drivers/char/hw_random/intel-rng.c +++ b/drivers/char/hw_random/intel-rng.c @@ -11,7 +11,7 @@ * derived from * * Hardware driver for the AMD 768 Random Number Generator (RNG) - * (c) Copyright 2001 Red Hat Inc <alan@redhat.com> + * (c) Copyright 2001 Red Hat Inc * * derived from * diff --git a/drivers/char/hw_random/via-rng.c b/drivers/char/hw_random/via-rng.c index 128202e18fc..4e9573c1d39 100644 --- a/drivers/char/hw_random/via-rng.c +++ b/drivers/char/hw_random/via-rng.c @@ -11,7 +11,7 @@ * derived from * * Hardware driver for the AMD 768 Random Number Generator (RNG) - * (c) Copyright 2001 Red Hat Inc <alan@redhat.com> + * (c) Copyright 2001 Red Hat Inc * * derived from * diff --git a/drivers/char/ip27-rtc.c b/drivers/char/ip27-rtc.c deleted file mode 100644 index 2abd881b4cb..00000000000 --- a/drivers/char/ip27-rtc.c +++ /dev/null @@ -1,329 +0,0 @@ -/* - * Driver for the SGS-Thomson M48T35 Timekeeper RAM chip - * - * Real Time Clock interface for Linux - * - * TODO: Implement periodic interrupts. - * - * Copyright (C) 2000 Silicon Graphics, Inc. - * Written by Ulf Carlsson (ulfc@engr.sgi.com) - * - * Based on code written by Paul Gortmaker. - * - * This driver allows use of the real time clock (built into - * nearly all computers) from user space. It exports the /dev/rtc - * interface supporting various ioctl() and also the /proc/rtc - * pseudo-file for status information. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - */ - -#define RTC_VERSION "1.09b" - -#include <linux/bcd.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/smp_lock.h> -#include <linux/types.h> -#include <linux/miscdevice.h> -#include <linux/ioport.h> -#include <linux/fcntl.h> -#include <linux/rtc.h> -#include <linux/init.h> -#include <linux/poll.h> -#include <linux/proc_fs.h> - -#include <asm/m48t35.h> -#include <asm/sn/ioc3.h> -#include <asm/io.h> -#include <asm/uaccess.h> -#include <asm/system.h> -#include <asm/sn/klconfig.h> -#include <asm/sn/sn0/ip27.h> -#include <asm/sn/sn0/hub.h> -#include <asm/sn/sn_private.h> - -static long rtc_ioctl(struct file *filp, unsigned int cmd, - unsigned long arg); - -static int rtc_read_proc(char *page, char **start, off_t off, - int count, int *eof, void *data); - -static void get_rtc_time(struct rtc_time *rtc_tm); - -/* - * Bits in rtc_status. (6 bits of room for future expansion) - */ - -#define RTC_IS_OPEN 0x01 /* means /dev/rtc is in use */ -#define RTC_TIMER_ON 0x02 /* missed irq timer active */ - -static unsigned char rtc_status; /* bitmapped status byte. */ -static unsigned long rtc_freq; /* Current periodic IRQ rate */ -static struct m48t35_rtc *rtc; - -/* - * If this driver ever becomes modularised, it will be really nice - * to make the epoch retain its value across module reload... - */ - -static unsigned long epoch = 1970; /* year corresponding to 0x00 */ - -static const unsigned char days_in_mo[] = -{0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31}; - -static long rtc_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) -{ - - struct rtc_time wtime; - - switch (cmd) { - case RTC_RD_TIME: /* Read the time/date from RTC */ - { - get_rtc_time(&wtime); - break; - } - case RTC_SET_TIME: /* Set the RTC */ - { - struct rtc_time rtc_tm; - unsigned char mon, day, hrs, min, sec, leap_yr; - unsigned int yrs; - - if (!capable(CAP_SYS_TIME)) - return -EACCES; - - if (copy_from_user(&rtc_tm, (struct rtc_time*)arg, - sizeof(struct rtc_time))) - return -EFAULT; - - yrs = rtc_tm.tm_year + 1900; - mon = rtc_tm.tm_mon + 1; /* tm_mon starts at zero */ - day = rtc_tm.tm_mday; - hrs = rtc_tm.tm_hour; - min = rtc_tm.tm_min; - sec = rtc_tm.tm_sec; - - if (yrs < 1970) - return -EINVAL; - - leap_yr = ((!(yrs % 4) && (yrs % 100)) || !(yrs % 400)); - - if ((mon > 12) || (day == 0)) - return -EINVAL; - - if (day > (days_in_mo[mon] + ((mon == 2) && leap_yr))) - return -EINVAL; - - if ((hrs >= 24) || (min >= 60) || (sec >= 60)) - return -EINVAL; - - if ((yrs -= epoch) > 255) /* They are unsigned */ - return -EINVAL; - - if (yrs > 169) - return -EINVAL; - - if (yrs >= 100) - yrs -= 100; - - sec = bin2bcd(sec); - min = bin2bcd(min); - hrs = bin2bcd(hrs); - day = bin2bcd(day); - mon = bin2bcd(mon); - yrs = bin2bcd(yrs); - - spin_lock_irq(&rtc_lock); - rtc->control |= M48T35_RTC_SET; - rtc->year = yrs; - rtc->month = mon; - rtc->date = day; - rtc->hour = hrs; - rtc->min = min; - rtc->sec = sec; - rtc->control &= ~M48T35_RTC_SET; - spin_unlock_irq(&rtc_lock); - - return 0; - } - default: - return -EINVAL; - } - return copy_to_user((void *)arg, &wtime, sizeof wtime) ? -EFAULT : 0; -} - -/* - * We enforce only one user at a time here with the open/close. - * Also clear the previous interrupt data on an open, and clean - * up things on a close. - */ - -static int rtc_open(struct inode *inode, struct file *file) -{ - lock_kernel(); - spin_lock_irq(&rtc_lock); - - if (rtc_status & RTC_IS_OPEN) { - spin_unlock_irq(&rtc_lock); - unlock_kernel(); - return -EBUSY; - } - - rtc_status |= RTC_IS_OPEN; - spin_unlock_irq(&rtc_lock); - unlock_kernel(); - - return 0; -} - -static int rtc_release(struct inode *inode, struct file *file) -{ - /* - * Turn off all interrupts once the device is no longer - * in use, and clear the data. - */ - - spin_lock_irq(&rtc_lock); - rtc_status &= ~RTC_IS_OPEN; - spin_unlock_irq(&rtc_lock); - - return 0; -} - -/* - * The various file operations we support. - */ - -static const struct file_operations rtc_fops = { - .owner = THIS_MODULE, - .unlocked_ioctl = rtc_ioctl, - .open = rtc_open, - .release = rtc_release, -}; - -static struct miscdevice rtc_dev= -{ - RTC_MINOR, - "rtc", - &rtc_fops -}; - -static int __init rtc_init(void) -{ - rtc = (struct m48t35_rtc *) - (KL_CONFIG_CH_CONS_INFO(master_nasid)->memory_base + IOC3_BYTEBUS_DEV0); - - printk(KERN_INFO "Real Time Clock Driver v%s\n", RTC_VERSION); - if (misc_register(&rtc_dev)) { - printk(KERN_ERR "rtc: cannot register misc device.\n"); - return -ENODEV; - } - if (!create_proc_read_entry("driver/rtc", 0, NULL, rtc_read_proc, NULL)) { - printk(KERN_ERR "rtc: cannot create /proc/rtc.\n"); - misc_deregister(&rtc_dev); - return -ENOENT; - } - - rtc_freq = 1024; - - return 0; -} - -static void __exit rtc_exit (void) -{ - /* interrupts and timer disabled at this point by rtc_release */ - - remove_proc_entry ("rtc", NULL); - misc_deregister(&rtc_dev); -} - -module_init(rtc_init); -module_exit(rtc_exit); - -/* - * Info exported via "/proc/rtc". - */ - -static int rtc_get_status(char *buf) -{ - char *p; - struct rtc_time tm; - - /* - * Just emulate the standard /proc/rtc - */ - - p = buf; - - get_rtc_time(&tm); - - /* - * There is no way to tell if the luser has the RTC set for local - * time or for Universal Standard Time (GMT). Probably local though. - */ - p += sprintf(p, - "rtc_time\t: %02d:%02d:%02d\n" - "rtc_date\t: %04d-%02d-%02d\n" - "rtc_epoch\t: %04lu\n" - "24hr\t\t: yes\n", - tm.tm_hour, tm.tm_min, tm.tm_sec, - tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday, epoch); - - return p - buf; -} - -static int rtc_read_proc(char *page, char **start, off_t off, - int count, int *eof, void *data) -{ - int len = rtc_get_status(page); - if (len <= off+count) *eof = 1; - *start = page + off; - len -= off; - if (len>count) len = count; - if (len<0) len = 0; - return len; -} - -static void get_rtc_time(struct rtc_time *rtc_tm) -{ - /* - * Do we need to wait for the last update to finish? - */ - - /* - * Only the values that we read from the RTC are set. We leave - * tm_wday, tm_yday and tm_isdst untouched. Even though the - * RTC has RTC_DAY_OF_WEEK, we ignore it, as it is only updated - * by the RTC when initially set to a non-zero value. - */ - spin_lock_irq(&rtc_lock); - rtc->control |= M48T35_RTC_READ; - rtc_tm->tm_sec = rtc->sec; - rtc_tm->tm_min = rtc->min; - rtc_tm->tm_hour = rtc->hour; - rtc_tm->tm_mday = rtc->date; - rtc_tm->tm_mon = rtc->month; - rtc_tm->tm_year = rtc->year; - rtc->control &= ~M48T35_RTC_READ; - spin_unlock_irq(&rtc_lock); - - rtc_tm->tm_sec = bcd2bin(rtc_tm->tm_sec); - rtc_tm->tm_min = bcd2bin(rtc_tm->tm_min); - rtc_tm->tm_hour = bcd2bin(rtc_tm->tm_hour); - rtc_tm->tm_mday = bcd2bin(rtc_tm->tm_mday); - rtc_tm->tm_mon = bcd2bin(rtc_tm->tm_mon); - rtc_tm->tm_year = bcd2bin(rtc_tm->tm_year); - - /* - * Account for differences between how the RTC uses the values - * and how they are defined in a struct rtc_time; - */ - if ((rtc_tm->tm_year += (epoch - 1900)) <= 69) - rtc_tm->tm_year += 100; - - rtc_tm->tm_mon--; -} diff --git a/drivers/char/ipmi/ipmi_devintf.c b/drivers/char/ipmi/ipmi_devintf.c index 835a33c8d5f..41fc11dc921 100644 --- a/drivers/char/ipmi/ipmi_devintf.c +++ b/drivers/char/ipmi/ipmi_devintf.c @@ -162,8 +162,6 @@ static int ipmi_release(struct inode *inode, struct file *file) if (rv) return rv; - ipmi_fasync (-1, file, 0); - /* FIXME - free the messages in the list. */ kfree(priv); @@ -957,3 +955,4 @@ module_exit(cleanup_ipmi); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Corey Minyard <minyard@mvista.com>"); MODULE_DESCRIPTION("Linux device interface for the IPMI message handler."); +MODULE_ALIAS("platform:ipmi_si"); diff --git a/drivers/char/ipmi/ipmi_watchdog.c b/drivers/char/ipmi/ipmi_watchdog.c index 235fab0bdf7..a4d57e31f71 100644 --- a/drivers/char/ipmi/ipmi_watchdog.c +++ b/drivers/char/ipmi/ipmi_watchdog.c @@ -870,7 +870,6 @@ static int ipmi_close(struct inode *ino, struct file *filep) clear_bit(0, &ipmi_wdog_open); } - ipmi_fasync(-1, filep, 0); expect_close = 0; return 0; diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c index 9a626e50b79..4d64a02612a 100644 --- a/drivers/char/pcmcia/synclink_cs.c +++ b/drivers/char/pcmcia/synclink_cs.c @@ -554,7 +554,7 @@ static int mgslpc_probe(struct pcmcia_device *link) /* Initialize the struct pcmcia_device structure */ /* Interrupt setup */ - link->irq.Attributes = IRQ_TYPE_EXCLUSIVE; + link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING; link->irq.IRQInfo1 = IRQ_LEVEL_ID; link->irq.Handler = NULL; diff --git a/drivers/char/random.c b/drivers/char/random.c index 705a839f179..675076f5fca 100644 --- a/drivers/char/random.c +++ b/drivers/char/random.c @@ -1139,18 +1139,12 @@ static int random_fasync(int fd, struct file *filp, int on) return fasync_helper(fd, filp, on, &fasync); } -static int random_release(struct inode *inode, struct file *filp) -{ - return fasync_helper(-1, filp, 0, &fasync); -} - const struct file_operations random_fops = { .read = random_read, .write = random_write, .poll = random_poll, .unlocked_ioctl = random_ioctl, .fasync = random_fasync, - .release = random_release, }; const struct file_operations urandom_fops = { @@ -1158,7 +1152,6 @@ const struct file_operations urandom_fops = { .write = random_write, .unlocked_ioctl = random_ioctl, .fasync = random_fasync, - .release = random_release, }; /*************************************************************** diff --git a/drivers/char/rtc.c b/drivers/char/rtc.c index 32dc89720d5..20d6efb6324 100644 --- a/drivers/char/rtc.c +++ b/drivers/char/rtc.c @@ -788,8 +788,6 @@ static int rtc_release(struct inode *inode, struct file *file) } spin_unlock_irq(&rtc_lock); - if (file->f_flags & FASYNC) - rtc_fasync(-1, file, 0); no_irq: #endif diff --git a/drivers/char/sonypi.c b/drivers/char/sonypi.c index 85e0eb76eea..2457b07dabd 100644 --- a/drivers/char/sonypi.c +++ b/drivers/char/sonypi.c @@ -898,7 +898,6 @@ static int sonypi_misc_fasync(int fd, struct file *filp, int on) static int sonypi_misc_release(struct inode *inode, struct file *file) { - sonypi_misc_fasync(-1, file, 0); mutex_lock(&sonypi_device.lock); sonypi_device.open_count--; mutex_unlock(&sonypi_device.lock); diff --git a/drivers/char/vt.c b/drivers/char/vt.c index d8f83e26e4a..a5af6072e2b 100644 --- a/drivers/char/vt.c +++ b/drivers/char/vt.c @@ -1644,7 +1644,10 @@ static void reset_terminal(struct vc_data *vc, int do_clear) vc->vc_tab_stop[1] = vc->vc_tab_stop[2] = vc->vc_tab_stop[3] = - vc->vc_tab_stop[4] = 0x01010101; + vc->vc_tab_stop[4] = + vc->vc_tab_stop[5] = + vc->vc_tab_stop[6] = + vc->vc_tab_stop[7] = 0x01010101; vc->vc_bell_pitch = DEFAULT_BELL_PITCH; vc->vc_bell_duration = DEFAULT_BELL_DURATION; @@ -1935,7 +1938,10 @@ static void do_con_trol(struct tty_struct *tty, struct vc_data *vc, int c) vc->vc_tab_stop[1] = vc->vc_tab_stop[2] = vc->vc_tab_stop[3] = - vc->vc_tab_stop[4] = 0; + vc->vc_tab_stop[4] = + vc->vc_tab_stop[5] = + vc->vc_tab_stop[6] = + vc->vc_tab_stop[7] = 0; } return; case 'm': diff --git a/drivers/dma/ioat_dma.c b/drivers/dma/ioat_dma.c index 43b8cefad2c..b0438c4f0c3 100644 --- a/drivers/dma/ioat_dma.c +++ b/drivers/dma/ioat_dma.c @@ -33,6 +33,7 @@ #include <linux/delay.h> #include <linux/dma-mapping.h> #include <linux/workqueue.h> +#include <linux/i7300_idle.h> #include "ioatdma.h" #include "ioatdma_registers.h" #include "ioatdma_hw.h" @@ -171,8 +172,10 @@ static int ioat_dma_enumerate_channels(struct ioatdma_device *device) xfercap_scale = readb(device->reg_base + IOAT_XFERCAP_OFFSET); xfercap = (xfercap_scale == 0 ? -1 : (1UL << xfercap_scale)); -#if CONFIG_I7300_IDLE_IOAT_CHANNEL - device->common.chancnt--; +#ifdef CONFIG_I7300_IDLE_IOAT_CHANNEL + if (i7300_idle_platform_probe(NULL, NULL) == 0) { + device->common.chancnt--; + } #endif for (i = 0; i < device->common.chancnt; i++) { ioat_chan = kzalloc(sizeof(*ioat_chan), GFP_KERNEL); diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig index 5a11e3cbcae..e0dbd388757 100644 --- a/drivers/edac/Kconfig +++ b/drivers/edac/Kconfig @@ -102,6 +102,13 @@ config EDAC_I3000 Support for error detection and correction on the Intel 3000 and 3010 server chipsets. +config EDAC_X38 + tristate "Intel X38" + depends on EDAC_MM_EDAC && PCI && X86 + help + Support for error detection and correction on the Intel + X38 server chipsets. + config EDAC_I82860 tristate "Intel 82860" depends on EDAC_MM_EDAC && PCI && X86_32 diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile index e5e9104b552..62c2d9bad8d 100644 --- a/drivers/edac/Makefile +++ b/drivers/edac/Makefile @@ -26,6 +26,7 @@ obj-$(CONFIG_EDAC_I82443BXGX) += i82443bxgx_edac.o obj-$(CONFIG_EDAC_I82875P) += i82875p_edac.o obj-$(CONFIG_EDAC_I82975X) += i82975x_edac.o obj-$(CONFIG_EDAC_I3000) += i3000_edac.o +obj-$(CONFIG_EDAC_X38) += x38_edac.o obj-$(CONFIG_EDAC_I82860) += i82860_edac.o obj-$(CONFIG_EDAC_R82600) += r82600_edac.o obj-$(CONFIG_EDAC_PASEMI) += pasemi_edac.o diff --git a/drivers/edac/cell_edac.c b/drivers/edac/cell_edac.c index 887072f5dc8..cd2e3b8087e 100644 --- a/drivers/edac/cell_edac.c +++ b/drivers/edac/cell_edac.c @@ -9,6 +9,7 @@ */ #undef DEBUG +#include <linux/edac.h> #include <linux/module.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -164,6 +165,8 @@ static int __devinit cell_edac_probe(struct platform_device *pdev) if (regs == NULL) return -ENODEV; + edac_op_state = EDAC_OPSTATE_POLL; + /* Get channel population */ reg = in_be64(®s->mic_mnt_cfg); dev_dbg(&pdev->dev, "MIC_MNT_CFG = 0x%016lx\n", reg); diff --git a/drivers/edac/x38_edac.c b/drivers/edac/x38_edac.c new file mode 100644 index 00000000000..2406c2ce284 --- /dev/null +++ b/drivers/edac/x38_edac.c @@ -0,0 +1,524 @@ +/* + * Intel X38 Memory Controller kernel module + * Copyright (C) 2008 Cluster Computing, Inc. + * + * This file may be distributed under the terms of the + * GNU General Public License. + * + * This file is based on i3200_edac.c + * + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/pci_ids.h> +#include <linux/slab.h> +#include <linux/edac.h> +#include "edac_core.h" + +#define X38_REVISION "1.1" + +#define EDAC_MOD_STR "x38_edac" + +#define PCI_DEVICE_ID_INTEL_X38_HB 0x29e0 + +#define X38_RANKS 8 +#define X38_RANKS_PER_CHANNEL 4 +#define X38_CHANNELS 2 + +/* Intel X38 register addresses - device 0 function 0 - DRAM Controller */ + +#define X38_MCHBAR_LOW 0x48 /* MCH Memory Mapped Register BAR */ +#define X38_MCHBAR_HIGH 0x4b +#define X38_MCHBAR_MASK 0xfffffc000ULL /* bits 35:14 */ +#define X38_MMR_WINDOW_SIZE 16384 + +#define X38_TOM 0xa0 /* Top of Memory (16b) + * + * 15:10 reserved + * 9:0 total populated physical memory + */ +#define X38_TOM_MASK 0x3ff /* bits 9:0 */ +#define X38_TOM_SHIFT 26 /* 64MiB grain */ + +#define X38_ERRSTS 0xc8 /* Error Status Register (16b) + * + * 15 reserved + * 14 Isochronous TBWRR Run Behind FIFO Full + * (ITCV) + * 13 Isochronous TBWRR Run Behind FIFO Put + * (ITSTV) + * 12 reserved + * 11 MCH Thermal Sensor Event + * for SMI/SCI/SERR (GTSE) + * 10 reserved + * 9 LOCK to non-DRAM Memory Flag (LCKF) + * 8 reserved + * 7 DRAM Throttle Flag (DTF) + * 6:2 reserved + * 1 Multi-bit DRAM ECC Error Flag (DMERR) + * 0 Single-bit DRAM ECC Error Flag (DSERR) + */ +#define X38_ERRSTS_UE 0x0002 +#define X38_ERRSTS_CE 0x0001 +#define X38_ERRSTS_BITS (X38_ERRSTS_UE | X38_ERRSTS_CE) + + +/* Intel MMIO register space - device 0 function 0 - MMR space */ + +#define X38_C0DRB 0x200 /* Channel 0 DRAM Rank Boundary (16b x 4) + * + * 15:10 reserved + * 9:0 Channel 0 DRAM Rank Boundary Address + */ +#define X38_C1DRB 0x600 /* Channel 1 DRAM Rank Boundary (16b x 4) */ +#define X38_DRB_MASK 0x3ff /* bits 9:0 */ +#define X38_DRB_SHIFT 26 /* 64MiB grain */ + +#define X38_C0ECCERRLOG 0x280 /* Channel 0 ECC Error Log (64b) + * + * 63:48 Error Column Address (ERRCOL) + * 47:32 Error Row Address (ERRROW) + * 31:29 Error Bank Address (ERRBANK) + * 28:27 Error Rank Address (ERRRANK) + * 26:24 reserved + * 23:16 Error Syndrome (ERRSYND) + * 15: 2 reserved + * 1 Multiple Bit Error Status (MERRSTS) + * 0 Correctable Error Status (CERRSTS) + */ +#define X38_C1ECCERRLOG 0x680 /* Channel 1 ECC Error Log (64b) */ +#define X38_ECCERRLOG_CE 0x1 +#define X38_ECCERRLOG_UE 0x2 +#define X38_ECCERRLOG_RANK_BITS 0x18000000 +#define X38_ECCERRLOG_SYNDROME_BITS 0xff0000 + +#define X38_CAPID0 0xe0 /* see P.94 of spec for details */ + +static int x38_channel_num; + +static int how_many_channel(struct pci_dev *pdev) +{ + unsigned char capid0_8b; /* 8th byte of CAPID0 */ + + pci_read_config_byte(pdev, X38_CAPID0 + 8, &capid0_8b); + if (capid0_8b & 0x20) { /* check DCD: Dual Channel Disable */ + debugf0("In single channel mode.\n"); + x38_channel_num = 1; + } else { + debugf0("In dual channel mode.\n"); + x38_channel_num = 2; + } + + return x38_channel_num; +} + +static unsigned long eccerrlog_syndrome(u64 log) +{ + return (log & X38_ECCERRLOG_SYNDROME_BITS) >> 16; +} + +static int eccerrlog_row(int channel, u64 log) +{ + return ((log & X38_ECCERRLOG_RANK_BITS) >> 27) | + (channel * X38_RANKS_PER_CHANNEL); +} + +enum x38_chips { + X38 = 0, +}; + +struct x38_dev_info { + const char *ctl_name; +}; + +struct x38_error_info { + u16 errsts; + u16 errsts2; + u64 eccerrlog[X38_CHANNELS]; +}; + +static const struct x38_dev_info x38_devs[] = { + [X38] = { + .ctl_name = "x38"}, +}; + +static struct pci_dev *mci_pdev; +static int x38_registered = 1; + + +static void x38_clear_error_info(struct mem_ctl_info *mci) +{ + struct pci_dev *pdev; + + pdev = to_pci_dev(mci->dev); + + /* + * Clear any error bits. + * (Yes, we really clear bits by writing 1 to them.) + */ + pci_write_bits16(pdev, X38_ERRSTS, X38_ERRSTS_BITS, + X38_ERRSTS_BITS); +} + +static u64 x38_readq(const void __iomem *addr) +{ + return readl(addr) | (((u64)readl(addr + 4)) << 32); +} + +static void x38_get_and_clear_error_info(struct mem_ctl_info *mci, + struct x38_error_info *info) +{ + struct pci_dev *pdev; + void __iomem *window = mci->pvt_info; + + pdev = to_pci_dev(mci->dev); + + /* + * This is a mess because there is no atomic way to read all the + * registers at once and the registers can transition from CE being + * overwritten by UE. + */ + pci_read_config_word(pdev, X38_ERRSTS, &info->errsts); + if (!(info->errsts & X38_ERRSTS_BITS)) + return; + + info->eccerrlog[0] = x38_readq(window + X38_C0ECCERRLOG); + if (x38_channel_num == 2) + info->eccerrlog[1] = x38_readq(window + X38_C1ECCERRLOG); + + pci_read_config_word(pdev, X38_ERRSTS, &info->errsts2); + + /* + * If the error is the same for both reads then the first set + * of reads is valid. If there is a change then there is a CE + * with no info and the second set of reads is valid and + * should be UE info. + */ + if ((info->errsts ^ info->errsts2) & X38_ERRSTS_BITS) { + info->eccerrlog[0] = x38_readq(window + X38_C0ECCERRLOG); + if (x38_channel_num == 2) + info->eccerrlog[1] = + x38_readq(window + X38_C1ECCERRLOG); + } + + x38_clear_error_info(mci); +} + +static void x38_process_error_info(struct mem_ctl_info *mci, + struct x38_error_info *info) +{ + int channel; + u64 log; + + if (!(info->errsts & X38_ERRSTS_BITS)) + return; + + if ((info->errsts ^ info->errsts2) & X38_ERRSTS_BITS) { + edac_mc_handle_ce_no_info(mci, "UE overwrote CE"); + info->errsts = info->errsts2; + } + + for (channel = 0; channel < x38_channel_num; channel++) { + log = info->eccerrlog[channel]; + if (log & X38_ECCERRLOG_UE) { + edac_mc_handle_ue(mci, 0, 0, + eccerrlog_row(channel, log), "x38 UE"); + } else if (log & X38_ECCERRLOG_CE) { + edac_mc_handle_ce(mci, 0, 0, + eccerrlog_syndrome(log), + eccerrlog_row(channel, log), 0, "x38 CE"); + } + } +} + +static void x38_check(struct mem_ctl_info *mci) +{ + struct x38_error_info info; + + debugf1("MC%d: %s()\n", mci->mc_idx, __func__); + x38_get_and_clear_error_info(mci, &info); + x38_process_error_info(mci, &info); +} + + +void __iomem *x38_map_mchbar(struct pci_dev *pdev) +{ + union { + u64 mchbar; + struct { + u32 mchbar_low; + u32 mchbar_high; + }; + } u; + void __iomem *window; + + pci_read_config_dword(pdev, X38_MCHBAR_LOW, &u.mchbar_low); + pci_write_config_dword(pdev, X38_MCHBAR_LOW, u.mchbar_low | 0x1); + pci_read_config_dword(pdev, X38_MCHBAR_HIGH, &u.mchbar_high); + u.mchbar &= X38_MCHBAR_MASK; + + if (u.mchbar != (resource_size_t)u.mchbar) { + printk(KERN_ERR + "x38: mmio space beyond accessible range (0x%llx)\n", + (unsigned long long)u.mchbar); + return NULL; + } + + window = ioremap_nocache(u.mchbar, X38_MMR_WINDOW_SIZE); + if (!window) + printk(KERN_ERR "x38: cannot map mmio space at 0x%llx\n", + (unsigned long long)u.mchbar); + + return window; +} + + +static void x38_get_drbs(void __iomem *window, + u16 drbs[X38_CHANNELS][X38_RANKS_PER_CHANNEL]) +{ + int i; + + for (i = 0; i < X38_RANKS_PER_CHANNEL; i++) { + drbs[0][i] = readw(window + X38_C0DRB + 2*i) & X38_DRB_MASK; + drbs[1][i] = readw(window + X38_C1DRB + 2*i) & X38_DRB_MASK; + } +} + +static bool x38_is_stacked(struct pci_dev *pdev, + u16 drbs[X38_CHANNELS][X38_RANKS_PER_CHANNEL]) +{ + u16 tom; + + pci_read_config_word(pdev, X38_TOM, &tom); + tom &= X38_TOM_MASK; + + return drbs[X38_CHANNELS - 1][X38_RANKS_PER_CHANNEL - 1] == tom; +} + +static unsigned long drb_to_nr_pages( + u16 drbs[X38_CHANNELS][X38_RANKS_PER_CHANNEL], + bool stacked, int channel, int rank) +{ + int n; + + n = drbs[channel][rank]; + if (rank > 0) + n -= drbs[channel][rank - 1]; + if (stacked && (channel == 1) && drbs[channel][rank] == + drbs[channel][X38_RANKS_PER_CHANNEL - 1]) { + n -= drbs[0][X38_RANKS_PER_CHANNEL - 1]; + } + + n <<= (X38_DRB_SHIFT - PAGE_SHIFT); + return n; +} + +static int x38_probe1(struct pci_dev *pdev, int dev_idx) +{ + int rc; + int i; + struct mem_ctl_info *mci = NULL; + unsigned long last_page; + u16 drbs[X38_CHANNELS][X38_RANKS_PER_CHANNEL]; + bool stacked; + void __iomem *window; + + debugf0("MC: %s()\n", __func__); + + window = x38_map_mchbar(pdev); + if (!window) + return -ENODEV; + + x38_get_drbs(window, drbs); + + how_many_channel(pdev); + + /* FIXME: unconventional pvt_info usage */ + mci = edac_mc_alloc(0, X38_RANKS, x38_channel_num, 0); + if (!mci) + return -ENOMEM; + + debugf3("MC: %s(): init mci\n", __func__); + + mci->dev = &pdev->dev; + mci->mtype_cap = MEM_FLAG_DDR2; + + mci->edac_ctl_cap = EDAC_FLAG_SECDED; + mci->edac_cap = EDAC_FLAG_SECDED; + + mci->mod_name = EDAC_MOD_STR; + mci->mod_ver = X38_REVISION; + mci->ctl_name = x38_devs[dev_idx].ctl_name; + mci->dev_name = pci_name(pdev); + mci->edac_check = x38_check; + mci->ctl_page_to_phys = NULL; + mci->pvt_info = window; + + stacked = x38_is_stacked(pdev, drbs); + + /* + * The dram rank boundary (DRB) reg values are boundary addresses + * for each DRAM rank with a granularity of 64MB. DRB regs are + * cumulative; the last one will contain the total memory + * contained in all ranks. + */ + last_page = -1UL; + for (i = 0; i < mci->nr_csrows; i++) { + unsigned long nr_pages; + struct csrow_info *csrow = &mci->csrows[i]; + + nr_pages = drb_to_nr_pages(drbs, stacked, + i / X38_RANKS_PER_CHANNEL, + i % X38_RANKS_PER_CHANNEL); + + if (nr_pages == 0) { + csrow->mtype = MEM_EMPTY; + continue; + } + + csrow->first_page = last_page + 1; + last_page += nr_pages; + csrow->last_page = last_page; + csrow->nr_pages = nr_pages; + + csrow->grain = nr_pages << PAGE_SHIFT; + csrow->mtype = MEM_DDR2; + csrow->dtype = DEV_UNKNOWN; + csrow->edac_mode = EDAC_UNKNOWN; + } + + x38_clear_error_info(mci); + + rc = -ENODEV; + if (edac_mc_add_mc(mci)) { + debugf3("MC: %s(): failed edac_mc_add_mc()\n", __func__); + goto fail; + } + + /* get this far and it's successful */ + debugf3("MC: %s(): success\n", __func__); + return 0; + +fail: + iounmap(window); + if (mci) + edac_mc_free(mci); + + return rc; +} + +static int __devinit x38_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + int rc; + + debugf0("MC: %s()\n", __func__); + + if (pci_enable_device(pdev) < 0) + return -EIO; + + rc = x38_probe1(pdev, ent->driver_data); + if (!mci_pdev) + mci_pdev = pci_dev_get(pdev); + + return rc; +} + +static void __devexit x38_remove_one(struct pci_dev *pdev) +{ + struct mem_ctl_info *mci; + + debugf0("%s()\n", __func__); + + mci = edac_mc_del_mc(&pdev->dev); + if (!mci) + return; + + iounmap(mci->pvt_info); + + edac_mc_free(mci); +} + +static const struct pci_device_id x38_pci_tbl[] __devinitdata = { + { + PCI_VEND_DEV(INTEL, X38_HB), PCI_ANY_ID, PCI_ANY_ID, 0, 0, + X38}, + { + 0, + } /* 0 terminated list. */ +}; + +MODULE_DEVICE_TABLE(pci, x38_pci_tbl); + +static struct pci_driver x38_driver = { + .name = EDAC_MOD_STR, + .probe = x38_init_one, + .remove = __devexit_p(x38_remove_one), + .id_table = x38_pci_tbl, +}; + +static int __init x38_init(void) +{ + int pci_rc; + + debugf3("MC: %s()\n", __func__); + + /* Ensure that the OPSTATE is set correctly for POLL or NMI */ + opstate_init(); + + pci_rc = pci_register_driver(&x38_driver); + if (pci_rc < 0) + goto fail0; + + if (!mci_pdev) { + x38_registered = 0; + mci_pdev = pci_get_device(PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_X38_HB, NULL); + if (!mci_pdev) { + debugf0("x38 pci_get_device fail\n"); + pci_rc = -ENODEV; + goto fail1; + } + + pci_rc = x38_init_one(mci_pdev, x38_pci_tbl); + if (pci_rc < 0) { + debugf0("x38 init fail\n"); + pci_rc = -ENODEV; + goto fail1; + } + } + + return 0; + +fail1: + pci_unregister_driver(&x38_driver); + +fail0: + if (mci_pdev) + pci_dev_put(mci_pdev); + + return pci_rc; +} + +static void __exit x38_exit(void) +{ + debugf3("MC: %s()\n", __func__); + + pci_unregister_driver(&x38_driver); + if (!x38_registered) { + x38_remove_one(mci_pdev); + pci_dev_put(mci_pdev); + } +} + +module_init(x38_init); +module_exit(x38_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Cluster Computing, Inc. Hitoshi Mitake"); +MODULE_DESCRIPTION("MC support for Intel X38 memory hub controllers"); + +module_param(edac_op_state, int, 0444); +MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI"); diff --git a/drivers/firewire/fw-device.c b/drivers/firewire/fw-device.c index 3fccdd48410..6b9be42c7b9 100644 --- a/drivers/firewire/fw-device.c +++ b/drivers/firewire/fw-device.c @@ -587,8 +587,7 @@ static void create_units(struct fw_device *device) unit->device.bus = &fw_bus_type; unit->device.type = &fw_unit_type; unit->device.parent = &device->device; - snprintf(unit->device.bus_id, sizeof(unit->device.bus_id), - "%s.%d", device->device.bus_id, i++); + dev_set_name(&unit->device, "%s.%d", dev_name(&device->device), i++); init_fw_attribute_group(&unit->device, fw_unit_attributes, @@ -711,8 +710,7 @@ static void fw_device_init(struct work_struct *work) device->device.type = &fw_device_type; device->device.parent = device->card->device; device->device.devt = MKDEV(fw_cdev_major, minor); - snprintf(device->device.bus_id, sizeof(device->device.bus_id), - "fw%d", minor); + dev_set_name(&device->device, "fw%d", minor); init_fw_attribute_group(&device->device, fw_device_attributes, @@ -741,13 +739,13 @@ static void fw_device_init(struct work_struct *work) if (device->config_rom_retries) fw_notify("created device %s: GUID %08x%08x, S%d00, " "%d config ROM retries\n", - device->device.bus_id, + dev_name(&device->device), device->config_rom[3], device->config_rom[4], 1 << device->max_speed, device->config_rom_retries); else fw_notify("created device %s: GUID %08x%08x, S%d00\n", - device->device.bus_id, + dev_name(&device->device), device->config_rom[3], device->config_rom[4], 1 << device->max_speed); device->config_rom_retries = 0; @@ -883,12 +881,12 @@ static void fw_device_refresh(struct work_struct *work) FW_DEVICE_RUNNING) == FW_DEVICE_SHUTDOWN) goto gone; - fw_notify("refreshed device %s\n", device->device.bus_id); + fw_notify("refreshed device %s\n", dev_name(&device->device)); device->config_rom_retries = 0; goto out; give_up: - fw_notify("giving up on refresh of device %s\n", device->device.bus_id); + fw_notify("giving up on refresh of device %s\n", dev_name(&device->device)); gone: atomic_set(&device->state, FW_DEVICE_SHUTDOWN); fw_device_shutdown(work); diff --git a/drivers/firewire/fw-ohci.c b/drivers/firewire/fw-ohci.c index 251416f2148..46610b09041 100644 --- a/drivers/firewire/fw-ohci.c +++ b/drivers/firewire/fw-ohci.c @@ -476,6 +476,7 @@ static int ar_context_add_page(struct ar_context *ctx) if (ab == NULL) return -ENOMEM; + ab->next = NULL; memset(&ab->descriptor, 0, sizeof(ab->descriptor)); ab->descriptor.control = cpu_to_le16(DESCRIPTOR_INPUT_MORE | DESCRIPTOR_STATUS | @@ -496,6 +497,21 @@ static int ar_context_add_page(struct ar_context *ctx) return 0; } +static void ar_context_release(struct ar_context *ctx) +{ + struct ar_buffer *ab, *ab_next; + size_t offset; + dma_addr_t ab_bus; + + for (ab = ctx->current_buffer; ab; ab = ab_next) { + ab_next = ab->next; + offset = offsetof(struct ar_buffer, data); + ab_bus = le32_to_cpu(ab->descriptor.data_address) - offset; + dma_free_coherent(ctx->ohci->card.device, PAGE_SIZE, + ab, ab_bus); + } +} + #if defined(CONFIG_PPC_PMAC) && defined(CONFIG_PPC32) #define cond_le32_to_cpu(v) \ (ohci->old_uninorth ? (__force __u32)(v) : le32_to_cpu(v)) @@ -2349,8 +2365,8 @@ pci_probe(struct pci_dev *dev, const struct pci_device_id *ent) ohci = kzalloc(sizeof(*ohci), GFP_KERNEL); if (ohci == NULL) { - fw_error("Could not malloc fw_ohci data.\n"); - return -ENOMEM; + err = -ENOMEM; + goto fail; } fw_card_initialize(&ohci->card, &ohci_driver, &dev->dev); @@ -2359,7 +2375,7 @@ pci_probe(struct pci_dev *dev, const struct pci_device_id *ent) err = pci_enable_device(dev); if (err) { - fw_error("Failed to enable OHCI hardware.\n"); + fw_error("Failed to enable OHCI hardware\n"); goto fail_free; } @@ -2427,9 +2443,8 @@ pci_probe(struct pci_dev *dev, const struct pci_device_id *ent) ohci->ir_context_list = kzalloc(size, GFP_KERNEL); if (ohci->it_context_list == NULL || ohci->ir_context_list == NULL) { - fw_error("Out of memory for it/ir contexts.\n"); err = -ENOMEM; - goto fail_registers; + goto fail_contexts; } /* self-id dma buffer allocation */ @@ -2438,9 +2453,8 @@ pci_probe(struct pci_dev *dev, const struct pci_device_id *ent) &ohci->self_id_bus, GFP_KERNEL); if (ohci->self_id_cpu == NULL) { - fw_error("Out of memory for self ID buffer.\n"); err = -ENOMEM; - goto fail_registers; + goto fail_contexts; } bus_options = reg_read(ohci, OHCI1394_BusOptions); @@ -2454,15 +2468,19 @@ pci_probe(struct pci_dev *dev, const struct pci_device_id *ent) goto fail_self_id; fw_notify("Added fw-ohci device %s, OHCI version %x.%x\n", - dev->dev.bus_id, version >> 16, version & 0xff); + dev_name(&dev->dev), version >> 16, version & 0xff); return 0; fail_self_id: dma_free_coherent(ohci->card.device, SELF_ID_BUF_SIZE, ohci->self_id_cpu, ohci->self_id_bus); - fail_registers: - kfree(ohci->it_context_list); + fail_contexts: kfree(ohci->ir_context_list); + kfree(ohci->it_context_list); + context_release(&ohci->at_response_ctx); + context_release(&ohci->at_request_ctx); + ar_context_release(&ohci->ar_response_ctx); + ar_context_release(&ohci->ar_request_ctx); pci_iounmap(dev, ohci->registers); fail_iomem: pci_release_region(dev, 0); @@ -2471,6 +2489,9 @@ pci_probe(struct pci_dev *dev, const struct pci_device_id *ent) fail_free: kfree(&ohci->card); ohci_pmac_off(dev); + fail: + if (err == -ENOMEM) + fw_error("Out of memory\n"); return err; } @@ -2491,8 +2512,19 @@ static void pci_remove(struct pci_dev *dev) software_reset(ohci); free_irq(dev->irq, ohci); + + if (ohci->next_config_rom && ohci->next_config_rom != ohci->config_rom) + dma_free_coherent(ohci->card.device, CONFIG_ROM_SIZE, + ohci->next_config_rom, ohci->next_config_rom_bus); + if (ohci->config_rom) + dma_free_coherent(ohci->card.device, CONFIG_ROM_SIZE, + ohci->config_rom, ohci->config_rom_bus); dma_free_coherent(ohci->card.device, SELF_ID_BUF_SIZE, ohci->self_id_cpu, ohci->self_id_bus); + ar_context_release(&ohci->ar_request_ctx); + ar_context_release(&ohci->ar_response_ctx); + context_release(&ohci->at_request_ctx); + context_release(&ohci->at_response_ctx); kfree(ohci->it_context_list); kfree(ohci->ir_context_list); pci_iounmap(dev, ohci->registers); diff --git a/drivers/firewire/fw-sbp2.c b/drivers/firewire/fw-sbp2.c index ef0b9b419c2..97df6dac3a8 100644 --- a/drivers/firewire/fw-sbp2.c +++ b/drivers/firewire/fw-sbp2.c @@ -173,6 +173,9 @@ struct sbp2_target { int blocked; /* ditto */ }; +/* Impossible login_id, to detect logout attempt before successful login */ +#define INVALID_LOGIN_ID 0x10000 + /* * Per section 7.4.8 of the SBP-2 spec, a mgt_ORB_timeout value can be * provided in the config rom. Most devices do provide a value, which @@ -788,9 +791,20 @@ static void sbp2_release_target(struct kref *kref) scsi_remove_device(sdev); scsi_device_put(sdev); } - sbp2_send_management_orb(lu, tgt->node_id, lu->generation, - SBP2_LOGOUT_REQUEST, lu->login_id, NULL); - + if (lu->login_id != INVALID_LOGIN_ID) { + int generation, node_id; + /* + * tgt->node_id may be obsolete here if we failed + * during initial login or after a bus reset where + * the topology changed. + */ + generation = device->generation; + smp_rmb(); /* node_id vs. generation */ + node_id = device->node_id; + sbp2_send_management_orb(lu, node_id, generation, + SBP2_LOGOUT_REQUEST, + lu->login_id, NULL); + } fw_core_remove_address_handler(&lu->address_handler); list_del(&lu->link); kfree(lu); @@ -805,19 +819,20 @@ static void sbp2_release_target(struct kref *kref) static struct workqueue_struct *sbp2_wq; +static void sbp2_target_put(struct sbp2_target *tgt) +{ + kref_put(&tgt->kref, sbp2_release_target); +} + /* * Always get the target's kref when scheduling work on one its units. * Each workqueue job is responsible to call sbp2_target_put() upon return. */ static void sbp2_queue_work(struct sbp2_logical_unit *lu, unsigned long delay) { - if (queue_delayed_work(sbp2_wq, &lu->work, delay)) - kref_get(&lu->tgt->kref); -} - -static void sbp2_target_put(struct sbp2_target *tgt) -{ - kref_put(&tgt->kref, sbp2_release_target); + kref_get(&lu->tgt->kref); + if (!queue_delayed_work(sbp2_wq, &lu->work, delay)) + sbp2_target_put(lu->tgt); } /* @@ -978,6 +993,7 @@ static int sbp2_add_logical_unit(struct sbp2_target *tgt, int lun_entry) lu->tgt = tgt; lu->lun = lun_entry & 0xffff; + lu->login_id = INVALID_LOGIN_ID; lu->retries = 0; lu->has_sdev = false; lu->blocked = false; @@ -1119,7 +1135,7 @@ static int sbp2_probe(struct device *dev) tgt->unit = unit; kref_init(&tgt->kref); INIT_LIST_HEAD(&tgt->lu_list); - tgt->bus_id = unit->device.bus_id; + tgt->bus_id = dev_name(&unit->device); tgt->guid = (u64)device->config_rom[3] << 32 | device->config_rom[4]; if (fw_device_enable_phys_dma(device) < 0) @@ -1147,7 +1163,7 @@ static int sbp2_probe(struct device *dev) /* Do the login in a workqueue so we can easily reschedule retries. */ list_for_each_entry(lu, &tgt->lu_list, link) - sbp2_queue_work(lu, 0); + sbp2_queue_work(lu, DIV_ROUND_UP(HZ, 5)); return 0; fail_tgt_put: diff --git a/drivers/firewire/fw-topology.c b/drivers/firewire/fw-topology.c index c1b81077c4a..5e204713002 100644 --- a/drivers/firewire/fw-topology.c +++ b/drivers/firewire/fw-topology.c @@ -413,7 +413,7 @@ static void update_tree(struct fw_card *card, struct fw_node *root) { struct list_head list0, list1; - struct fw_node *node0, *node1; + struct fw_node *node0, *node1, *next1; int i, event; INIT_LIST_HEAD(&list0); @@ -485,7 +485,9 @@ update_tree(struct fw_card *card, struct fw_node *root) } node0 = fw_node(node0->link.next); - node1 = fw_node(node1->link.next); + next1 = fw_node(node1->link.next); + fw_node_put(node1); + node1 = next1; } } diff --git a/drivers/firewire/fw-transaction.h b/drivers/firewire/fw-transaction.h index 027f58ce81a..aed7dbb17cd 100644 --- a/drivers/firewire/fw-transaction.h +++ b/drivers/firewire/fw-transaction.h @@ -248,7 +248,7 @@ struct fw_card { struct fw_node *local_node; struct fw_node *root_node; struct fw_node *irm_node; - int color; + u8 color; /* must be u8 to match the definition in struct fw_node */ int gap_count; bool beta_repeaters_present; diff --git a/drivers/firmware/dmi_scan.c b/drivers/firmware/dmi_scan.c index 3e526b6d00c..8daf4793ac3 100644 --- a/drivers/firmware/dmi_scan.c +++ b/drivers/firmware/dmi_scan.c @@ -81,9 +81,9 @@ static void dmi_table(u8 *buf, int len, int num, const struct dmi_header *dm = (const struct dmi_header *)data; /* - * We want to know the total length (formated area and strings) - * before decoding to make sure we won't run off the table in - * dmi_decode or dmi_string + * We want to know the total length (formatted area and + * strings) before decoding to make sure we won't run off the + * table in dmi_decode or dmi_string */ data += dm->length; while ((data - buf < len - 1) && (data[0] || data[1])) diff --git a/drivers/gpu/drm/drm_fops.c b/drivers/gpu/drm/drm_fops.c index 0d46627663b..78eeed5caaf 100644 --- a/drivers/gpu/drm/drm_fops.c +++ b/drivers/gpu/drm/drm_fops.c @@ -406,8 +406,6 @@ int drm_release(struct inode *inode, struct file *filp) if (dev->driver->driver_features & DRIVER_GEM) drm_gem_release(dev, file_priv); - drm_fasync(-1, filp, 0); - mutex_lock(&dev->ctxlist_mutex); if (!list_empty(&dev->ctxlist)) { struct drm_ctx_list *pos, *n; diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile index 5ba78e4fd2b..d8fb5d8ee7e 100644 --- a/drivers/gpu/drm/i915/Makefile +++ b/drivers/gpu/drm/i915/Makefile @@ -3,13 +3,14 @@ # Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher. ccflags-y := -Iinclude/drm -i915-y := i915_drv.o i915_dma.o i915_irq.o i915_mem.o i915_opregion.o \ +i915-y := i915_drv.o i915_dma.o i915_irq.o i915_mem.o \ i915_suspend.o \ i915_gem.o \ i915_gem_debug.o \ i915_gem_proc.o \ i915_gem_tiling.o +i915-$(CONFIG_ACPI) += i915_opregion.o i915-$(CONFIG_COMPAT) += i915_ioc32.o obj-$(CONFIG_DRM_I915) += i915.o diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index 01de536e021..256e22963ae 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -960,6 +960,7 @@ struct drm_ioctl_desc i915_ioctls[] = { DRM_IOCTL_DEF(DRM_I915_GEM_SW_FINISH, i915_gem_sw_finish_ioctl, 0), DRM_IOCTL_DEF(DRM_I915_GEM_SET_TILING, i915_gem_set_tiling, 0), DRM_IOCTL_DEF(DRM_I915_GEM_GET_TILING, i915_gem_get_tiling, 0), + DRM_IOCTL_DEF(DRM_I915_GEM_GET_APERTURE, i915_gem_get_aperture_ioctl, 0), }; int i915_max_ioctl = DRM_ARRAY_SIZE(i915_ioctls); diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index f20ffe17df7..572dcd0e3e0 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -31,6 +31,7 @@ #define _I915_DRV_H_ #include "i915_reg.h" +#include <linux/io-mapping.h> /* General customization: */ @@ -246,6 +247,8 @@ typedef struct drm_i915_private { struct { struct drm_mm gtt_space; + struct io_mapping *gtt_mapping; + /** * List of objects currently involved in rendering from the * ringbuffer. @@ -502,6 +505,8 @@ int i915_gem_set_tiling(struct drm_device *dev, void *data, struct drm_file *file_priv); int i915_gem_get_tiling(struct drm_device *dev, void *data, struct drm_file *file_priv); +int i915_gem_get_aperture_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv); void i915_gem_load(struct drm_device *dev); int i915_gem_proc_init(struct drm_minor *minor); void i915_gem_proc_cleanup(struct drm_minor *minor); @@ -539,11 +544,18 @@ extern int i915_restore_state(struct drm_device *dev); extern int i915_save_state(struct drm_device *dev); extern int i915_restore_state(struct drm_device *dev); +#ifdef CONFIG_ACPI /* i915_opregion.c */ extern int intel_opregion_init(struct drm_device *dev); extern void intel_opregion_free(struct drm_device *dev); extern void opregion_asle_intr(struct drm_device *dev); extern void opregion_enable_asle(struct drm_device *dev); +#else +static inline int intel_opregion_init(struct drm_device *dev) { return 0; } +static inline void intel_opregion_free(struct drm_device *dev) { return; } +static inline void opregion_asle_intr(struct drm_device *dev) { return; } +static inline void opregion_enable_asle(struct drm_device *dev) { return; } +#endif /** * Lock test for when it's just for synchronization of ring access. diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 17ae330ff26..b0ec73fa6a9 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -79,6 +79,28 @@ i915_gem_init_ioctl(struct drm_device *dev, void *data, return 0; } +int +i915_gem_get_aperture_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv) +{ + drm_i915_private_t *dev_priv = dev->dev_private; + struct drm_i915_gem_get_aperture *args = data; + struct drm_i915_gem_object *obj_priv; + + if (!(dev->driver->driver_features & DRIVER_GEM)) + return -ENODEV; + + args->aper_size = dev->gtt_total; + args->aper_available_size = args->aper_size; + + list_for_each_entry(obj_priv, &dev_priv->mm.active_list, list) { + if (obj_priv->pin_count > 0) + args->aper_available_size -= obj_priv->obj->size; + } + + return 0; +} + /** * Creates a new mm object and returns a handle to it. @@ -171,35 +193,50 @@ i915_gem_pread_ioctl(struct drm_device *dev, void *data, return 0; } -/* - * Try to write quickly with an atomic kmap. Return true on success. - * - * If this fails (which includes a partial write), we'll redo the whole - * thing with the slow version. - * - * This is a workaround for the low performance of iounmap (approximate - * 10% cpu cost on normal 3D workloads). kmap_atomic on HIGHMEM kernels - * happens to let us map card memory without taking IPIs. When the vmap - * rework lands we should be able to dump this hack. +/* This is the fast write path which cannot handle + * page faults in the source data */ -static inline int fast_user_write(unsigned long pfn, char __user *user_data, - int l, int o) + +static inline int +fast_user_write(struct io_mapping *mapping, + loff_t page_base, int page_offset, + char __user *user_data, + int length) { -#ifdef CONFIG_HIGHMEM - unsigned long unwritten; char *vaddr_atomic; + unsigned long unwritten; - vaddr_atomic = kmap_atomic_pfn(pfn, KM_USER0); -#if WATCH_PWRITE - DRM_INFO("pwrite i %d o %d l %d pfn %ld vaddr %p\n", - i, o, l, pfn, vaddr_atomic); -#endif - unwritten = __copy_from_user_inatomic_nocache(vaddr_atomic + o, user_data, l); - kunmap_atomic(vaddr_atomic, KM_USER0); - return !unwritten; -#else + vaddr_atomic = io_mapping_map_atomic_wc(mapping, page_base); + unwritten = __copy_from_user_inatomic_nocache(vaddr_atomic + page_offset, + user_data, length); + io_mapping_unmap_atomic(vaddr_atomic); + if (unwritten) + return -EFAULT; + return 0; +} + +/* Here's the write path which can sleep for + * page faults + */ + +static inline int +slow_user_write(struct io_mapping *mapping, + loff_t page_base, int page_offset, + char __user *user_data, + int length) +{ + char __iomem *vaddr; + unsigned long unwritten; + + vaddr = io_mapping_map_wc(mapping, page_base); + if (vaddr == NULL) + return -EFAULT; + unwritten = __copy_from_user(vaddr + page_offset, + user_data, length); + io_mapping_unmap(vaddr); + if (unwritten) + return -EFAULT; return 0; -#endif } static int @@ -208,10 +245,12 @@ i915_gem_gtt_pwrite(struct drm_device *dev, struct drm_gem_object *obj, struct drm_file *file_priv) { struct drm_i915_gem_object *obj_priv = obj->driver_private; + drm_i915_private_t *dev_priv = dev->dev_private; ssize_t remain; - loff_t offset; + loff_t offset, page_base; char __user *user_data; - int ret = 0; + int page_offset, page_length; + int ret; user_data = (char __user *) (uintptr_t) args->data_ptr; remain = args->size; @@ -235,57 +274,37 @@ i915_gem_gtt_pwrite(struct drm_device *dev, struct drm_gem_object *obj, obj_priv->dirty = 1; while (remain > 0) { - unsigned long pfn; - int i, o, l; - /* Operation in this page * - * i = page number - * o = offset within page - * l = bytes to copy + * page_base = page offset within aperture + * page_offset = offset within page + * page_length = bytes to copy for this page */ - i = offset >> PAGE_SHIFT; - o = offset & (PAGE_SIZE-1); - l = remain; - if ((o + l) > PAGE_SIZE) - l = PAGE_SIZE - o; - - pfn = (dev->agp->base >> PAGE_SHIFT) + i; - - if (!fast_user_write(pfn, user_data, l, o)) { - unsigned long unwritten; - char __iomem *vaddr; - - vaddr = ioremap_wc(pfn << PAGE_SHIFT, PAGE_SIZE); -#if WATCH_PWRITE - DRM_INFO("pwrite slow i %d o %d l %d " - "pfn %ld vaddr %p\n", - i, o, l, pfn, vaddr); -#endif - if (vaddr == NULL) { - ret = -EFAULT; - goto fail; - } - unwritten = __copy_from_user(vaddr + o, user_data, l); -#if WATCH_PWRITE - DRM_INFO("unwritten %ld\n", unwritten); -#endif - iounmap(vaddr); - if (unwritten) { - ret = -EFAULT; + page_base = (offset & ~(PAGE_SIZE-1)); + page_offset = offset & (PAGE_SIZE-1); + page_length = remain; + if ((page_offset + remain) > PAGE_SIZE) + page_length = PAGE_SIZE - page_offset; + + ret = fast_user_write (dev_priv->mm.gtt_mapping, page_base, + page_offset, user_data, page_length); + + /* If we get a fault while copying data, then (presumably) our + * source page isn't available. In this case, use the + * non-atomic function + */ + if (ret) { + ret = slow_user_write (dev_priv->mm.gtt_mapping, + page_base, page_offset, + user_data, page_length); + if (ret) goto fail; - } } - remain -= l; - user_data += l; - offset += l; + remain -= page_length; + user_data += page_length; + offset += page_length; } -#if WATCH_PWRITE && 1 - i915_gem_clflush_object(obj); - i915_gem_dump_object(obj, args->offset + args->size, __func__, ~0); - i915_gem_clflush_object(obj); -#endif fail: i915_gem_object_unpin(obj); @@ -1503,12 +1522,12 @@ i915_gem_object_pin_and_relocate(struct drm_gem_object *obj, struct drm_i915_gem_exec_object *entry) { struct drm_device *dev = obj->dev; + drm_i915_private_t *dev_priv = dev->dev_private; struct drm_i915_gem_relocation_entry reloc; struct drm_i915_gem_relocation_entry __user *relocs; struct drm_i915_gem_object *obj_priv = obj->driver_private; int i, ret; - uint32_t last_reloc_offset = -1; - void __iomem *reloc_page = NULL; + void __iomem *reloc_page; /* Choose the GTT offset for our buffer and put it there. */ ret = i915_gem_object_pin(obj, (uint32_t) entry->alignment); @@ -1631,26 +1650,11 @@ i915_gem_object_pin_and_relocate(struct drm_gem_object *obj, * perform. */ reloc_offset = obj_priv->gtt_offset + reloc.offset; - if (reloc_page == NULL || - (last_reloc_offset & ~(PAGE_SIZE - 1)) != - (reloc_offset & ~(PAGE_SIZE - 1))) { - if (reloc_page != NULL) - iounmap(reloc_page); - - reloc_page = ioremap_wc(dev->agp->base + - (reloc_offset & - ~(PAGE_SIZE - 1)), - PAGE_SIZE); - last_reloc_offset = reloc_offset; - if (reloc_page == NULL) { - drm_gem_object_unreference(target_obj); - i915_gem_object_unpin(obj); - return -ENOMEM; - } - } - + reloc_page = io_mapping_map_atomic_wc(dev_priv->mm.gtt_mapping, + (reloc_offset & + ~(PAGE_SIZE - 1))); reloc_entry = (uint32_t __iomem *)(reloc_page + - (reloc_offset & (PAGE_SIZE - 1))); + (reloc_offset & (PAGE_SIZE - 1))); reloc_val = target_obj_priv->gtt_offset + reloc.delta; #if WATCH_BUF @@ -1659,6 +1663,7 @@ i915_gem_object_pin_and_relocate(struct drm_gem_object *obj, readl(reloc_entry), reloc_val); #endif writel(reloc_val, reloc_entry); + io_mapping_unmap_atomic(reloc_page); /* Write the updated presumed offset for this entry back out * to the user. @@ -1674,9 +1679,6 @@ i915_gem_object_pin_and_relocate(struct drm_gem_object *obj, drm_gem_object_unreference(target_obj); } - if (reloc_page != NULL) - iounmap(reloc_page); - #if WATCH_BUF if (0) i915_gem_dump_object(obj, 128, __func__, ~0); @@ -2518,6 +2520,10 @@ i915_gem_entervt_ioctl(struct drm_device *dev, void *data, if (ret != 0) return ret; + dev_priv->mm.gtt_mapping = io_mapping_create_wc(dev->agp->base, + dev->agp->agp_info.aper_size + * 1024 * 1024); + mutex_lock(&dev->struct_mutex); BUG_ON(!list_empty(&dev_priv->mm.active_list)); BUG_ON(!list_empty(&dev_priv->mm.flushing_list)); @@ -2535,11 +2541,13 @@ int i915_gem_leavevt_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) { + drm_i915_private_t *dev_priv = dev->dev_private; int ret; ret = i915_gem_idle(dev); drm_irq_uninstall(dev); + io_mapping_free(dev_priv->mm.gtt_mapping); return ret; } diff --git a/drivers/gpu/drm/radeon/radeon_cp.c b/drivers/gpu/drm/radeon/radeon_cp.c index 59a2132a8f5..073894824e6 100644 --- a/drivers/gpu/drm/radeon/radeon_cp.c +++ b/drivers/gpu/drm/radeon/radeon_cp.c @@ -653,15 +653,16 @@ static void radeon_cp_init_ring_buffer(struct drm_device * dev, RADEON_WRITE(RADEON_SCRATCH_UMSK, 0x7); /* Turn on bus mastering */ - if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS400) || - ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690) || + if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690) || ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS740)) { - /* rs400, rs690/rs740 */ - tmp = RADEON_READ(RADEON_BUS_CNTL) & ~RS400_BUS_MASTER_DIS; + /* rs600/rs690/rs740 */ + tmp = RADEON_READ(RADEON_BUS_CNTL) & ~RS600_BUS_MASTER_DIS; RADEON_WRITE(RADEON_BUS_CNTL, tmp); - } else if (!(((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV380) || - ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_R423))) { - /* r1xx, r2xx, r300, r(v)350, r420/r481, rs480 */ + } else if (((dev_priv->flags & RADEON_FAMILY_MASK) <= CHIP_RV350) || + ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_R420) || + ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS400) || + ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS480)) { + /* r1xx, r2xx, r300, r(v)350, r420/r481, rs400/rs480 */ tmp = RADEON_READ(RADEON_BUS_CNTL) & ~RADEON_BUS_MASTER_DIS; RADEON_WRITE(RADEON_BUS_CNTL, tmp); } /* PCIE cards appears to not need this */ diff --git a/drivers/gpu/drm/radeon/radeon_drv.h b/drivers/gpu/drm/radeon/radeon_drv.h index 4dbb813910c..02f5575ba39 100644 --- a/drivers/gpu/drm/radeon/radeon_drv.h +++ b/drivers/gpu/drm/radeon/radeon_drv.h @@ -447,12 +447,12 @@ extern int r300_do_cp_cmdbuf(struct drm_device *dev, * handling, not bus mastering itself. */ #define RADEON_BUS_CNTL 0x0030 -/* r1xx, r2xx, r300, r(v)350, r420/r481, rs480 */ +/* r1xx, r2xx, r300, r(v)350, r420/r481, rs400/rs480 */ # define RADEON_BUS_MASTER_DIS (1 << 6) -/* rs400, rs690/rs740 */ -# define RS400_BUS_MASTER_DIS (1 << 14) -# define RS400_MSI_REARM (1 << 20) -/* see RS480_MSI_REARM in AIC_CNTL for rs480 */ +/* rs600/rs690/rs740 */ +# define RS600_BUS_MASTER_DIS (1 << 14) +# define RS600_MSI_REARM (1 << 20) +/* see RS400_MSI_REARM in AIC_CNTL for rs480 */ #define RADEON_BUS_CNTL1 0x0034 # define RADEON_PMI_BM_DIS (1 << 2) @@ -937,7 +937,7 @@ extern int r300_do_cp_cmdbuf(struct drm_device *dev, #define RADEON_AIC_CNTL 0x01d0 # define RADEON_PCIGART_TRANSLATE_EN (1 << 0) -# define RS480_MSI_REARM (1 << 3) +# define RS400_MSI_REARM (1 << 3) #define RADEON_AIC_STAT 0x01d4 #define RADEON_AIC_PT_BASE 0x01d8 #define RADEON_AIC_LO_ADDR 0x01dc diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig index f5999a91614..b4fd8ca701a 100644 --- a/drivers/hid/Kconfig +++ b/drivers/hid/Kconfig @@ -247,7 +247,6 @@ config HID_SUNPLUS config THRUSTMASTER_FF tristate "ThrustMaster devices support" - default m depends on USB_HID select INPUT_FF_MEMLESS help @@ -256,7 +255,6 @@ config THRUSTMASTER_FF config ZEROPLUS_FF tristate "Zeroplus based game controller support" - default m depends on USB_HID select INPUT_FF_MEMLESS help diff --git a/drivers/hid/hid-apple.c b/drivers/hid/hid-apple.c index fd7f896b34f..c6ab4ba60c5 100644 --- a/drivers/hid/hid-apple.c +++ b/drivers/hid/hid-apple.c @@ -312,13 +312,6 @@ static int apple_probe(struct hid_device *hdev, unsigned int connect_mask = HID_CONNECT_DEFAULT; int ret; - /* return something else or move to hid layer? device will reside - allocated */ - if (id->bus == BUS_USB && (quirks & APPLE_IGNORE_MOUSE) && - to_usb_interface(hdev->dev.parent)->cur_altsetting-> - desc.bInterfaceProtocol == USB_INTERFACE_PROTOCOL_MOUSE) - return -ENODEV; - asc = kzalloc(sizeof(*asc), GFP_KERNEL); if (asc == NULL) { dev_err(&hdev->dev, "can't alloc apple descriptor\n"); @@ -367,38 +360,32 @@ static const struct hid_device_id apple_devices[] = { .driver_data = APPLE_MIGHTYMOUSE | APPLE_INVERT_HWHEEL }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_ANSI), - .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN | - APPLE_IGNORE_MOUSE }, + .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_ISO), - .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN | - APPLE_IGNORE_MOUSE }, + .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER_ANSI), - .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN | - APPLE_IGNORE_MOUSE }, + .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER_ISO), .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN | - APPLE_IGNORE_MOUSE | APPLE_ISO_KEYBOARD }, + APPLE_ISO_KEYBOARD }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER_JIS), - .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN | - APPLE_IGNORE_MOUSE }, + .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER3_ANSI), - .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN | - APPLE_IGNORE_MOUSE }, + .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER3_ISO), .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN | - APPLE_IGNORE_MOUSE | APPLE_ISO_KEYBOARD }, + APPLE_ISO_KEYBOARD }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER3_JIS), .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN | - APPLE_IGNORE_MOUSE | APPLE_RDESC_JIS }, + APPLE_RDESC_JIS }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_ANSI), - .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN | - APPLE_IGNORE_MOUSE }, + .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_ISO), .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN | - APPLE_IGNORE_MOUSE | APPLE_ISO_KEYBOARD }, + APPLE_ISO_KEYBOARD }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_JIS), .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN | - APPLE_IGNORE_MOUSE | APPLE_RDESC_JIS}, + APPLE_RDESC_JIS }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_ANSI), .driver_data = APPLE_HAS_FN }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_ISO), @@ -406,14 +393,12 @@ static const struct hid_device_id apple_devices[] = { { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_JIS), .driver_data = APPLE_HAS_FN }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_ANSI), - .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN | - APPLE_IGNORE_MOUSE }, + .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_ISO), - .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN | - APPLE_IGNORE_MOUSE }, + .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_JIS), .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN | - APPLE_IGNORE_MOUSE | APPLE_RDESC_JIS }, + APPLE_RDESC_JIS }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ANSI), .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ISO), @@ -422,25 +407,21 @@ static const struct hid_device_id apple_devices[] = { { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_JIS), .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_ANSI), - .driver_data = APPLE_HAS_FN | APPLE_IGNORE_MOUSE }, + .driver_data = APPLE_HAS_FN }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_ISO), - .driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD | - APPLE_IGNORE_MOUSE }, + .driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_JIS), - .driver_data = APPLE_HAS_FN | APPLE_IGNORE_MOUSE | APPLE_RDESC_JIS }, + .driver_data = APPLE_HAS_FN | APPLE_RDESC_JIS }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI), - .driver_data = APPLE_HAS_FN | APPLE_IGNORE_MOUSE }, + .driver_data = APPLE_HAS_FN }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_ISO), - .driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD | - APPLE_IGNORE_MOUSE }, + .driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_JIS), - .driver_data = APPLE_HAS_FN | APPLE_IGNORE_MOUSE | APPLE_RDESC_JIS }, + .driver_data = APPLE_HAS_FN | APPLE_RDESC_JIS }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY), - .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN | - APPLE_IGNORE_MOUSE }, + .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY), - .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN | - APPLE_IGNORE_MOUSE }, + .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN }, /* Apple wireless Mighty Mouse */ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, 0x030c), diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 721a36d9758..1903e751565 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1263,7 +1263,9 @@ static const struct hid_device_id hid_blacklist[] = { { HID_USB_DEVICE(USB_VENDOR_ID_DELL, USB_DEVICE_ID_DELL_W7658) }, { HID_USB_DEVICE(USB_VENDOR_ID_DELL, USB_DEVICE_ID_DELL_SK8115) }, { HID_USB_DEVICE(USB_VENDOR_ID_EZKEY, USB_DEVICE_ID_BTC_8193) }, + { HID_USB_DEVICE(USB_VENDOR_ID_GENERIC_13BA, USB_DEVICE_ID_GENERIC_13BA_KBD_MOUSE) }, { HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE) }, + { HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE_2) }, { HID_USB_DEVICE(USB_VENDOR_ID_LABTEC, USB_DEVICE_ID_LABTEC_WIRELESS_KEYBOARD) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_MX3000_RECEIVER) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_S510_RECEIVER) }, @@ -1275,8 +1277,6 @@ static const struct hid_device_id hid_blacklist[] = { { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_KBD) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_ELITE_KBD) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_CORDLESS_DESKTOP_LX500) }, - { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_LX3) }, - { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_V150) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_EXTREME_3D) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_WHEEL) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_RUMBLEPAD) }, @@ -1295,6 +1295,7 @@ static const struct hid_device_id hid_blacklist[] = { { HID_USB_DEVICE(USB_VENDOR_ID_PETALYNX, USB_DEVICE_ID_PETALYNX_MAXTER_REMOTE) }, { HID_USB_DEVICE(USB_VENDOR_ID_SAMSUNG, USB_DEVICE_ID_SAMSUNG_IR_REMOTE) }, { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER) }, + { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_VAIO_VGX_MOUSE) }, { HID_USB_DEVICE(USB_VENDOR_ID_SUNPLUS, USB_DEVICE_ID_SUNPLUS_WDESKTOP) }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, 0x030c) }, @@ -1406,6 +1407,7 @@ static const struct hid_device_id hid_ignore_list[] = { { HID_USB_DEVICE(USB_VENDOR_ID_AIRCABLE, USB_DEVICE_ID_AIRCABLE1) }, { HID_USB_DEVICE(USB_VENDOR_ID_ALCOR, USB_DEVICE_ID_ALCOR_USBRS232) }, { HID_USB_DEVICE(USB_VENDOR_ID_ASUS, USB_DEVICE_ID_ASUS_LCM)}, + { HID_USB_DEVICE(USB_VENDOR_ID_ASUS, USB_DEVICE_ID_ASUS_LCM2)}, { HID_USB_DEVICE(USB_VENDOR_ID_BERKSHIRE, USB_DEVICE_ID_BERKSHIRE_PCWD) }, { HID_USB_DEVICE(USB_VENDOR_ID_CIDC, 0x0103) }, { HID_USB_DEVICE(USB_VENDOR_ID_CYGNAL, USB_DEVICE_ID_CYGNAL_RADIO_SI470X) }, @@ -1541,6 +1543,40 @@ static const struct hid_device_id hid_ignore_list[] = { { } }; +/** + * hid_mouse_ignore_list - mouse devices which should not be handled by the hid layer + * + * There are composite devices for which we want to ignore only a certain + * interface. This is a list of devices for which only the mouse interface will + * be ignored. This allows a dedicated driver to take care of the interface. + */ +static const struct hid_device_id hid_mouse_ignore_list[] = { + /* appletouch driver */ + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_ANSI) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_ISO) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER_ANSI) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER_ISO) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER_JIS) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER3_ANSI) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER3_ISO) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER3_JIS) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_ANSI) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_ISO) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_JIS) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_ANSI) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_ISO) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_JIS) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_ANSI) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_ISO) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_JIS) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_ISO) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_JIS) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY) }, + { } +}; + static bool hid_ignore(struct hid_device *hdev) { switch (hdev->vendor) { @@ -1557,6 +1593,10 @@ static bool hid_ignore(struct hid_device *hdev) break; } + if (hdev->type == HID_TYPE_USBMOUSE && + hid_match_id(hdev, hid_mouse_ignore_list)) + return true; + return !!hid_match_id(hdev, hid_ignore_list); } diff --git a/drivers/hid/hid-dell.c b/drivers/hid/hid-dell.c index 1a0d0dfc62f..f5474300b83 100644 --- a/drivers/hid/hid-dell.c +++ b/drivers/hid/hid-dell.c @@ -48,6 +48,7 @@ err_free: static const struct hid_device_id dell_devices[] = { { HID_USB_DEVICE(USB_VENDOR_ID_DELL, USB_DEVICE_ID_DELL_W7658) }, { HID_USB_DEVICE(USB_VENDOR_ID_DELL, USB_DEVICE_ID_DELL_SK8115) }, + { HID_USB_DEVICE(USB_VENDOR_ID_GENERIC_13BA, USB_DEVICE_ID_GENERIC_13BA_KBD_MOUSE) }, { } }; MODULE_DEVICE_TABLE(hid, dell_devices); diff --git a/drivers/hid/hid-gyration.c b/drivers/hid/hid-gyration.c index ac5120f542c..04a0afec52a 100644 --- a/drivers/hid/hid-gyration.c +++ b/drivers/hid/hid-gyration.c @@ -4,9 +4,9 @@ * Copyright (c) 1999 Andreas Gal * Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@suse.cz> * Copyright (c) 2005 Michael Haboustak <mike-@cinci.rr.com> for Concept2, Inc - * Copyright (c) 2006-2007 Jiri Kosina * Copyright (c) 2007 Paul Walmsley * Copyright (c) 2008 Jiri Slaby + * Copyright (c) 2006-2008 Jiri Kosina */ /* @@ -40,6 +40,7 @@ static int gyration_input_mapping(struct hid_device *hdev, struct hid_input *hi, case 0x025: gy_map_key_clear(KEY_PVR); break; case 0x046: gy_map_key_clear(KEY_MEDIA); break; case 0x047: gy_map_key_clear(KEY_MP3); break; + case 0x048: gy_map_key_clear(KEY_MEDIA); break; case 0x049: gy_map_key_clear(KEY_CAMERA); break; case 0x04a: gy_map_key_clear(KEY_VIDEO); break; @@ -68,6 +69,7 @@ static int gyration_event(struct hid_device *hdev, struct hid_field *field, static const struct hid_device_id gyration_devices[] = { { HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE) }, + { HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE_2) }, { } }; MODULE_DEVICE_TABLE(hid, gyration_devices); diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index d9a1ba920c2..5cc40429173 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -89,6 +89,7 @@ #define USB_VENDOR_ID_ASUS 0x0b05 #define USB_DEVICE_ID_ASUS_LCM 0x1726 +#define USB_DEVICE_ID_ASUS_LCM2 0x175b #define USB_VENDOR_ID_ATEN 0x0557 #define USB_DEVICE_ID_ATEN_UC100KM 0x2004 @@ -162,6 +163,9 @@ #define USB_VENDOR_ID_GENERAL_TOUCH 0x0dfc +#define USB_VENDOR_ID_GENERIC_13BA 0x13ba +#define USB_DEVICE_ID_GENERIC_13BA_KBD_MOUSE 0x0017 + #define USB_VENDOR_ID_GLAB 0x06c2 #define USB_DEVICE_ID_4_PHIDGETSERVO_30 0x0038 #define USB_DEVICE_ID_1_PHIDGETSERVO_30 0x0039 @@ -236,6 +240,7 @@ #define USB_VENDOR_ID_GYRATION 0x0c16 #define USB_DEVICE_ID_GYRATION_REMOTE 0x0002 +#define USB_DEVICE_ID_GYRATION_REMOTE_2 0x0003 #define USB_VENDOR_ID_HAPP 0x078b #define USB_DEVICE_ID_UGCI_DRIVING 0x0010 @@ -268,8 +273,6 @@ #define USB_DEVICE_ID_LD_MACHINETEST 0x2040 #define USB_VENDOR_ID_LOGITECH 0x046d -#define USB_DEVICE_ID_LOGITECH_LX3 0xc044 -#define USB_DEVICE_ID_LOGITECH_V150 0xc047 #define USB_DEVICE_ID_LOGITECH_RECEIVER 0xc101 #define USB_DEVICE_ID_LOGITECH_HARMONY_FIRST 0xc110 #define USB_DEVICE_ID_LOGITECH_HARMONY_LAST 0xc14f @@ -350,6 +353,7 @@ #define USB_DEVICE_ID_SAMSUNG_IR_REMOTE 0x0001 #define USB_VENDOR_ID_SONY 0x054c +#define USB_DEVICE_ID_SONY_VAIO_VGX_MOUSE 0x024b #define USB_DEVICE_ID_SONY_PS3_CONTROLLER 0x0268 #define USB_VENDOR_ID_SOUNDGRAPH 0x15c2 diff --git a/drivers/hid/hid-lg.c b/drivers/hid/hid-lg.c index 406d8c82abf..2bae340eafe 100644 --- a/drivers/hid/hid-lg.c +++ b/drivers/hid/hid-lg.c @@ -287,11 +287,6 @@ static const struct hid_device_id lg_devices[] = { { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_CORDLESS_DESKTOP_LX500), .driver_data = LG_IGNORE_DOUBLED_WHEEL | LG_EXPANDED_KEYMAP }, - { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_LX3), - .driver_data = LG_INVERT_HWHEEL }, - { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_V150), - .driver_data = LG_INVERT_HWHEEL }, - { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_EXTREME_3D), .driver_data = LG_NOGET }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_WHEEL), diff --git a/drivers/hid/hid-sony.c b/drivers/hid/hid-sony.c index 3af8095a7de..86e563b8d64 100644 --- a/drivers/hid/hid-sony.c +++ b/drivers/hid/hid-sony.c @@ -4,9 +4,9 @@ * Copyright (c) 1999 Andreas Gal * Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@suse.cz> * Copyright (c) 2005 Michael Haboustak <mike-@cinci.rr.com> for Concept2, Inc - * Copyright (c) 2006-2007 Jiri Kosina * Copyright (c) 2007 Paul Walmsley * Copyright (c) 2008 Jiri Slaby + * Copyright (c) 2006-2008 Jiri Kosina */ /* @@ -23,6 +23,26 @@ #include "hid-ids.h" +#define VAIO_RDESC_CONSTANT 0x0001 + +struct sony_sc { + unsigned long quirks; +}; + +/* Sony Vaio VGX has wrongly mouse pointer declared as constant */ +static void sony_report_fixup(struct hid_device *hdev, __u8 *rdesc, + unsigned int rsize) +{ + struct sony_sc *sc = hid_get_drvdata(hdev); + + if ((sc->quirks & VAIO_RDESC_CONSTANT) && + rsize >= 56 && rdesc[54] == 0x81 && rdesc[55] == 0x07) { + dev_info(&hdev->dev, "Fixing up Sony Vaio VGX report " + "descriptor\n"); + rdesc[55] = 0x06; + } +} + /* * Sending HID_REQ_GET_REPORT changes the operation mode of the ps3 controller * to "operational". Without this, the ps3 controller will not report any @@ -56,6 +76,17 @@ static int sony_set_operational(struct hid_device *hdev) static int sony_probe(struct hid_device *hdev, const struct hid_device_id *id) { int ret; + unsigned long quirks = id->driver_data; + struct sony_sc *sc; + + sc = kzalloc(sizeof(*sc), GFP_KERNEL); + if (sc == NULL) { + dev_err(&hdev->dev, "can't alloc apple descriptor\n"); + return -ENOMEM; + } + + sc->quirks = quirks; + hid_set_drvdata(hdev, sc); ret = hid_parse(hdev); if (ret) { @@ -78,11 +109,20 @@ static int sony_probe(struct hid_device *hdev, const struct hid_device_id *id) err_stop: hid_hw_stop(hdev); err_free: + kfree(sc); return ret; } +static void sony_remove(struct hid_device *hdev) +{ + hid_hw_stop(hdev); + kfree(hid_get_drvdata(hdev)); +} + static const struct hid_device_id sony_devices[] = { { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER) }, + { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_VAIO_VGX_MOUSE), + .driver_data = VAIO_RDESC_CONSTANT }, { } }; MODULE_DEVICE_TABLE(hid, sony_devices); @@ -91,6 +131,8 @@ static struct hid_driver sony_driver = { .name = "sony", .id_table = sony_devices, .probe = sony_probe, + .remove = sony_remove, + .report_fixup = sony_report_fixup, }; static int sony_init(void) diff --git a/drivers/hid/hidraw.c b/drivers/hid/hidraw.c index af3edb98df4..894d52e05bf 100644 --- a/drivers/hid/hidraw.c +++ b/drivers/hid/hidraw.c @@ -264,6 +264,7 @@ static long hidraw_ioctl(struct file *file, unsigned int cmd, default: ret = -ENOTTY; } + unlock_kernel(); return ret; } @@ -403,7 +404,7 @@ out: return result; } -void __exit hidraw_exit(void) +void hidraw_exit(void) { dev_t dev_id = MKDEV(hidraw_major, 0); diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c index 705a43cdeea..18e5ddd722c 100644 --- a/drivers/hid/usbhid/hid-core.c +++ b/drivers/hid/usbhid/hid-core.c @@ -20,6 +20,7 @@ #include <linux/kernel.h> #include <linux/list.h> #include <linux/mm.h> +#include <linux/mutex.h> #include <linux/smp_lock.h> #include <linux/spinlock.h> #include <asm/unaligned.h> @@ -776,21 +777,10 @@ static int usbhid_start(struct hid_device *hid) struct usb_interface *intf = to_usb_interface(hid->dev.parent); struct usb_host_interface *interface = intf->cur_altsetting; struct usb_device *dev = interface_to_usbdev(intf); - struct usbhid_device *usbhid; + struct usbhid_device *usbhid = hid->driver_data; unsigned int n, insize = 0; int ret; - WARN_ON(hid->driver_data); - - usbhid = kzalloc(sizeof(struct usbhid_device), GFP_KERNEL); - if (usbhid == NULL) { - ret = -ENOMEM; - goto err; - } - - hid->driver_data = usbhid; - usbhid->hid = hid; - usbhid->bufsize = HID_MIN_BUFFER_SIZE; hid_find_max_report(hid, HID_INPUT_REPORT, &usbhid->bufsize); hid_find_max_report(hid, HID_OUTPUT_REPORT, &usbhid->bufsize); @@ -804,6 +794,7 @@ static int usbhid_start(struct hid_device *hid) if (insize > HID_MAX_BUFFER_SIZE) insize = HID_MAX_BUFFER_SIZE; + mutex_lock(&usbhid->setup); if (hid_alloc_buffers(dev, hid)) { ret = -ENOMEM; goto fail; @@ -888,6 +879,9 @@ static int usbhid_start(struct hid_device *hid) usbhid_init_reports(hid); hid_dump_device(hid); + set_bit(HID_STARTED, &usbhid->iofl); + mutex_unlock(&usbhid->setup); + return 0; fail: @@ -895,8 +889,7 @@ fail: usb_free_urb(usbhid->urbout); usb_free_urb(usbhid->urbctrl); hid_free_buffers(dev, hid); - kfree(usbhid); -err: + mutex_unlock(&usbhid->setup); return ret; } @@ -907,6 +900,8 @@ static void usbhid_stop(struct hid_device *hid) if (WARN_ON(!usbhid)) return; + mutex_lock(&usbhid->setup); + clear_bit(HID_STARTED, &usbhid->iofl); spin_lock_irq(&usbhid->inlock); /* Sync with error handler */ set_bit(HID_DISCONNECTED, &usbhid->iofl); spin_unlock_irq(&usbhid->inlock); @@ -931,8 +926,7 @@ static void usbhid_stop(struct hid_device *hid) usb_free_urb(usbhid->urbout); hid_free_buffers(hid_to_usb_dev(hid), hid); - kfree(usbhid); - hid->driver_data = NULL; + mutex_unlock(&usbhid->setup); } static struct hid_ll_driver usb_hid_driver = { @@ -947,6 +941,7 @@ static struct hid_ll_driver usb_hid_driver = { static int hid_probe(struct usb_interface *intf, const struct usb_device_id *id) { struct usb_device *dev = interface_to_usbdev(intf); + struct usbhid_device *usbhid; struct hid_device *hid; size_t len; int ret; @@ -972,6 +967,9 @@ static int hid_probe(struct usb_interface *intf, const struct usb_device_id *id) hid->vendor = le16_to_cpu(dev->descriptor.idVendor); hid->product = le16_to_cpu(dev->descriptor.idProduct); hid->name[0] = 0; + if (intf->cur_altsetting->desc.bInterfaceProtocol == + USB_INTERFACE_PROTOCOL_MOUSE) + hid->type = HID_TYPE_USBMOUSE; if (dev->manufacturer) strlcpy(hid->name, dev->manufacturer, sizeof(hid->name)); @@ -997,14 +995,26 @@ static int hid_probe(struct usb_interface *intf, const struct usb_device_id *id) if (usb_string(dev, dev->descriptor.iSerialNumber, hid->uniq, 64) <= 0) hid->uniq[0] = 0; + usbhid = kzalloc(sizeof(*usbhid), GFP_KERNEL); + if (usbhid == NULL) { + ret = -ENOMEM; + goto err; + } + + hid->driver_data = usbhid; + usbhid->hid = hid; + mutex_init(&usbhid->setup); /* needed on suspend/resume */ + ret = hid_add_device(hid); if (ret) { if (ret != -ENODEV) dev_err(&intf->dev, "can't add hid device: %d\n", ret); - goto err; + goto err_free; } return 0; +err_free: + kfree(usbhid); err: hid_destroy_device(hid); return ret; @@ -1013,11 +1023,14 @@ err: static void hid_disconnect(struct usb_interface *intf) { struct hid_device *hid = usb_get_intfdata(intf); + struct usbhid_device *usbhid; if (WARN_ON(!hid)) return; + usbhid = hid->driver_data; hid_destroy_device(hid); + kfree(usbhid); } static int hid_suspend(struct usb_interface *intf, pm_message_t message) @@ -1025,11 +1038,18 @@ static int hid_suspend(struct usb_interface *intf, pm_message_t message) struct hid_device *hid = usb_get_intfdata (intf); struct usbhid_device *usbhid = hid->driver_data; + mutex_lock(&usbhid->setup); + if (!test_bit(HID_STARTED, &usbhid->iofl)) { + mutex_unlock(&usbhid->setup); + return 0; + } + spin_lock_irq(&usbhid->inlock); /* Sync with error handler */ set_bit(HID_SUSPENDED, &usbhid->iofl); spin_unlock_irq(&usbhid->inlock); - del_timer(&usbhid->io_retry); + del_timer_sync(&usbhid->io_retry); usb_kill_urb(usbhid->urbin); + mutex_unlock(&usbhid->setup); dev_dbg(&intf->dev, "suspend\n"); return 0; } @@ -1040,9 +1060,16 @@ static int hid_resume(struct usb_interface *intf) struct usbhid_device *usbhid = hid->driver_data; int status; + mutex_lock(&usbhid->setup); + if (!test_bit(HID_STARTED, &usbhid->iofl)) { + mutex_unlock(&usbhid->setup); + return 0; + } + clear_bit(HID_SUSPENDED, &usbhid->iofl); usbhid->retry_delay = 0; status = hid_start_in(hid); + mutex_unlock(&usbhid->setup); dev_dbg(&intf->dev, "resume status %d\n", status); return status; } diff --git a/drivers/hid/usbhid/hiddev.c b/drivers/hid/usbhid/hiddev.c index babd65dd46a..83e851a5ed3 100644 --- a/drivers/hid/usbhid/hiddev.c +++ b/drivers/hid/usbhid/hiddev.c @@ -242,8 +242,6 @@ static int hiddev_release(struct inode * inode, struct file * file) struct hiddev_list *list = file->private_data; unsigned long flags; - hiddev_fasync(-1, file, 0); - spin_lock_irqsave(&list->hiddev->list_lock, flags); list_del(&list->node); spin_unlock_irqrestore(&list->hiddev->list_lock, flags); @@ -436,8 +434,7 @@ static noinline int hiddev_ioctl_usage(struct hiddev *hiddev, unsigned int cmd, if (copy_to_user(user_arg, uref, sizeof(*uref))) goto fault; - kfree(uref_multi); - return 0; + goto goodreturn; default: if (cmd != HIDIOCGUSAGE && diff --git a/drivers/hid/usbhid/usbhid.h b/drivers/hid/usbhid/usbhid.h index abedb13c623..55973ff5400 100644 --- a/drivers/hid/usbhid/usbhid.h +++ b/drivers/hid/usbhid/usbhid.h @@ -27,6 +27,7 @@ #include <linux/types.h> #include <linux/slab.h> #include <linux/list.h> +#include <linux/mutex.h> #include <linux/timer.h> #include <linux/wait.h> #include <linux/workqueue.h> @@ -73,6 +74,7 @@ struct usbhid_device { dma_addr_t outbuf_dma; /* Output buffer dma */ spinlock_t outlock; /* Output fifo spinlock */ + struct mutex setup; unsigned long iofl; /* I/O flags (CTRL_RUNNING, OUT_RUNNING) */ struct timer_list io_retry; /* Retry timer */ unsigned long stop_retry; /* Time to give up, in jiffies */ diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c index bc011da79e1..be3285912cb 100644 --- a/drivers/hwmon/applesmc.c +++ b/drivers/hwmon/applesmc.c @@ -116,6 +116,18 @@ static const char* temperature_sensors_sets[][36] = { /* Set 9: Macbook Pro 3,1 (Santa Rosa) */ { "TALP", "TB0T", "TC0D", "TC0P", "TG0D", "TG0H", "TTF0", "TW0P", "Th0H", "Th1H", "Th2H", "Tm0P", "Ts0P", NULL }, +/* Set 10: iMac 5,1 */ + { "TA0P", "TC0D", "TC0P", "TG0D", "TH0P", "TO0P", "Tm0P", NULL }, +/* Set 11: Macbook 5,1 */ + { "TB0T", "TB1T", "TB2T", "TB3T", "TC0D", "TC0P", "TN0D", "TN0P", + "TTF0", "Th0H", "Th1H", "ThFH", "Ts0P", "Ts0S", NULL }, +/* Set 12: Macbook Pro 5,1 */ + { "TB0T", "TB1T", "TB2T", "TB3T", "TC0D", "TC0F", "TC0P", "TG0D", + "TG0F", "TG0H", "TG0P", "TG0T", "TG1H", "TN0D", "TN0P", "TTF0", + "Th2H", "Tm0P", "Ts0P", "Ts0S", NULL }, +/* Set 13: iMac 8,1 */ + { "TA0P", "TC0D", "TC0H", "TC0P", "TG0D", "TG0H", "TG0P", "TH0P", + "TL0P", "TO0P", "TW0P", "Tm0P", "Tp0P", NULL }, }; /* List of keys used to read/write fan speeds */ @@ -1276,6 +1288,14 @@ static __initdata struct dmi_match_data applesmc_dmi_data[] = { { .accelerometer = 1, .light = 1, .temperature_set = 8 }, /* MacBook Pro 3: accelerometer, backlight and temperature set 9 */ { .accelerometer = 1, .light = 1, .temperature_set = 9 }, +/* iMac 5: light sensor only, temperature set 10 */ + { .accelerometer = 0, .light = 0, .temperature_set = 10 }, +/* MacBook 5: accelerometer, backlight and temperature set 11 */ + { .accelerometer = 1, .light = 1, .temperature_set = 11 }, +/* MacBook Pro 5: accelerometer, backlight and temperature set 12 */ + { .accelerometer = 1, .light = 1, .temperature_set = 12 }, +/* iMac 8: light sensor only, temperature set 13 */ + { .accelerometer = 0, .light = 0, .temperature_set = 13 }, }; /* Note that DMI_MATCH(...,"MacBook") will match "MacBookPro1,1". @@ -1285,6 +1305,10 @@ static __initdata struct dmi_system_id applesmc_whitelist[] = { DMI_MATCH(DMI_BOARD_VENDOR, "Apple"), DMI_MATCH(DMI_PRODUCT_NAME, "MacBookAir") }, &applesmc_dmi_data[7]}, + { applesmc_dmi_match, "Apple MacBook Pro 5", { + DMI_MATCH(DMI_BOARD_VENDOR, "Apple"), + DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro5") }, + &applesmc_dmi_data[12]}, { applesmc_dmi_match, "Apple MacBook Pro 4", { DMI_MATCH(DMI_BOARD_VENDOR, "Apple"), DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro4") }, @@ -1305,6 +1329,10 @@ static __initdata struct dmi_system_id applesmc_whitelist[] = { DMI_MATCH(DMI_BOARD_VENDOR,"Apple"), DMI_MATCH(DMI_PRODUCT_NAME,"MacBook3") }, &applesmc_dmi_data[6]}, + { applesmc_dmi_match, "Apple MacBook 5", { + DMI_MATCH(DMI_BOARD_VENDOR, "Apple"), + DMI_MATCH(DMI_PRODUCT_NAME, "MacBook5") }, + &applesmc_dmi_data[11]}, { applesmc_dmi_match, "Apple MacBook", { DMI_MATCH(DMI_BOARD_VENDOR,"Apple"), DMI_MATCH(DMI_PRODUCT_NAME,"MacBook") }, @@ -1317,6 +1345,14 @@ static __initdata struct dmi_system_id applesmc_whitelist[] = { DMI_MATCH(DMI_BOARD_VENDOR,"Apple"), DMI_MATCH(DMI_PRODUCT_NAME,"MacPro2") }, &applesmc_dmi_data[4]}, + { applesmc_dmi_match, "Apple iMac 8", { + DMI_MATCH(DMI_BOARD_VENDOR, "Apple"), + DMI_MATCH(DMI_PRODUCT_NAME, "iMac8") }, + &applesmc_dmi_data[13]}, + { applesmc_dmi_match, "Apple iMac 5", { + DMI_MATCH(DMI_BOARD_VENDOR, "Apple"), + DMI_MATCH(DMI_PRODUCT_NAME, "iMac5") }, + &applesmc_dmi_data[10]}, { applesmc_dmi_match, "Apple iMac", { DMI_MATCH(DMI_BOARD_VENDOR,"Apple"), DMI_MATCH(DMI_PRODUCT_NAME,"iMac") }, diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index c772e02c280..1fac4e23313 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -507,7 +507,7 @@ static int s3c24xx_i2c_doxfer(struct s3c24xx_i2c *i2c, struct i2c_msg *msgs, int unsigned long timeout; int ret; - if (!readl(i2c->regs + S3C2410_IICCON) & S3C2410_IICCON_IRQEN) + if (!(readl(i2c->regs + S3C2410_IICCON) & S3C2410_IICCON_IRQEN)) return -EIO; ret = s3c24xx_i2c_set_master(i2c); diff --git a/drivers/i2c/busses/scx200_i2c.c b/drivers/i2c/busses/scx200_i2c.c index c3022a02344..e4c98539c51 100644 --- a/drivers/i2c/busses/scx200_i2c.c +++ b/drivers/i2c/busses/scx200_i2c.c @@ -81,6 +81,7 @@ static struct i2c_algo_bit_data scx200_i2c_data = { static struct i2c_adapter scx200_i2c_ops = { .owner = THIS_MODULE, + .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, .id = I2C_HW_B_SCX200, .algo_data = &scx200_i2c_data, .name = "NatSemi SCx200 I2C", diff --git a/drivers/ide/alim15x3.c b/drivers/ide/alim15x3.c index daf9dce39e5..e56c7b72f9e 100644 --- a/drivers/ide/alim15x3.c +++ b/drivers/ide/alim15x3.c @@ -5,7 +5,7 @@ * * Copyright (C) 1998-2000 Andre Hedrick (andre@linux-ide.org) * May be copied or modified under the terms of the GNU General Public License - * Copyright (C) 2002 Alan Cox <alan@redhat.com> + * Copyright (C) 2002 Alan Cox * ALi (now ULi M5228) support by Clear Zhang <Clear.Zhang@ali.com.tw> * Copyright (C) 2007 MontaVista Software, Inc. <source@mvista.com> * Copyright (C) 2007 Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> diff --git a/drivers/ide/hpt366.c b/drivers/ide/hpt366.c index a7909e9c720..f5afd46ed51 100644 --- a/drivers/ide/hpt366.c +++ b/drivers/ide/hpt366.c @@ -52,7 +52,7 @@ * different clocks on read/write. This requires overloading rw_disk and * other deeply crazy things. Thanks to <http://www.hoerstreich.de> for * keeping me sane. - * Alan Cox <alan@redhat.com> + * Alan Cox <alan@lxorguk.ukuu.org.uk> * * - fix the clock turnaround code: it was writing to the wrong ports when * called for the secondary channel, caching the current clock mode per- diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 48b5eda3ab4..42ab6d8715f 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -1250,7 +1250,8 @@ static void cdrom_do_block_pc(ide_drive_t *drive, struct request *rq) * separate masks. */ alignment = queue_dma_alignment(q) | q->dma_pad_mask; - if ((unsigned long)buf & alignment || rq->data_len & alignment + if ((unsigned long)buf & alignment + || rq->data_len & q->dma_pad_mask || object_is_on_stack(buf)) drive->dma = 0; } diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c index e5adebe8ac2..eb9fac4d0f0 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c @@ -2,7 +2,7 @@ * Copyright (C) 1994-1998 Linus Torvalds & authors (see below) * Copyright (C) 1998-2002 Linux ATA Development * Andre Hedrick <andre@linux-ide.org> - * Copyright (C) 2003 Red Hat <alan@redhat.com> + * Copyright (C) 2003 Red Hat * Copyright (C) 2003-2005, 2007 Bartlomiej Zolnierkiewicz */ diff --git a/drivers/ide/ide-gd.c b/drivers/ide/ide-gd.c index 7b666285437..b8078b3231f 100644 --- a/drivers/ide/ide-gd.c +++ b/drivers/ide/ide-gd.c @@ -281,7 +281,12 @@ static int ide_gd_media_changed(struct gendisk *disk) static int ide_gd_revalidate_disk(struct gendisk *disk) { struct ide_disk_obj *idkp = ide_drv_g(disk, ide_disk_obj); - set_capacity(disk, ide_gd_capacity(idkp->drive)); + ide_drive_t *drive = idkp->drive; + + if (ide_gd_media_changed(disk)) + drive->disk_ops->get_capacity(drive); + + set_capacity(disk, ide_gd_capacity(drive)); return 0; } diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index bb7a1ed8094..5d6ba14e211 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -1,6 +1,6 @@ /* * Copyright (C) 2000-2002 Andre Hedrick <andre@linux-ide.org> - * Copyright (C) 2003 Red Hat <alan@redhat.com> + * Copyright (C) 2003 Red Hat * */ diff --git a/drivers/ide/ide-pci-generic.c b/drivers/ide/ide-pci-generic.c index 474f96a7c07..bddae2b329a 100644 --- a/drivers/ide/ide-pci-generic.c +++ b/drivers/ide/ide-pci-generic.c @@ -1,6 +1,6 @@ /* * Copyright (C) 2001-2002 Andre Hedrick <andre@linux-ide.org> - * Portions (C) Copyright 2002 Red Hat Inc <alan@redhat.com> + * Portions (C) Copyright 2002 Red Hat Inc * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the diff --git a/drivers/ide/ide-proc.c b/drivers/ide/ide-proc.c index c31d0dd7a53..f3cddd1b2f8 100644 --- a/drivers/ide/ide-proc.c +++ b/drivers/ide/ide-proc.c @@ -1,6 +1,6 @@ /* * Copyright (C) 1997-1998 Mark Lord - * Copyright (C) 2003 Red Hat <alan@redhat.com> + * Copyright (C) 2003 Red Hat * * Some code was moved here from ide.c, see it for original copyrights. */ diff --git a/drivers/ide/it821x.c b/drivers/ide/it821x.c index 995e18bb313..ef004089761 100644 --- a/drivers/ide/it821x.c +++ b/drivers/ide/it821x.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2004 Red Hat <alan@redhat.com> + * Copyright (C) 2004 Red Hat * Copyright (C) 2007 Bartlomiej Zolnierkiewicz * * May be copied or modified under the terms of the GNU General Public License diff --git a/drivers/ide/jmicron.c b/drivers/ide/jmicron.c index 9a68433cf46..bf2be6431b2 100644 --- a/drivers/ide/jmicron.c +++ b/drivers/ide/jmicron.c @@ -1,6 +1,6 @@ /* - * Copyright (C) 2006 Red Hat <alan@redhat.com> + * Copyright (C) 2006 Red Hat * * May be copied or modified under the terms of the GNU General Public License */ diff --git a/drivers/ide/piix.c b/drivers/ide/piix.c index d63f9fdca76..61d2d920a5c 100644 --- a/drivers/ide/piix.c +++ b/drivers/ide/piix.c @@ -1,7 +1,7 @@ /* * Copyright (C) 1998-1999 Andrzej Krzysztofowicz, Author and Maintainer * Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org> - * Copyright (C) 2003 Red Hat Inc <alan@redhat.com> + * Copyright (C) 2003 Red Hat * Copyright (C) 2006-2007 MontaVista Software, Inc. <source@mvista.com> * * May be copied or modified under the terms of the GNU General Public License diff --git a/drivers/ide/scc_pata.c b/drivers/ide/scc_pata.c index f26aa5d54ef..0f48f9dacfa 100644 --- a/drivers/ide/scc_pata.c +++ b/drivers/ide/scc_pata.c @@ -5,7 +5,7 @@ * * This code is based on drivers/ide/pci/siimage.c: * Copyright (C) 2001-2002 Andre Hedrick <andre@linux-ide.org> - * Copyright (C) 2003 Red Hat <alan@redhat.com> + * Copyright (C) 2003 Red Hat * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/ide/siimage.c b/drivers/ide/siimage.c index c3107df7773..7d622d20bc4 100644 --- a/drivers/ide/siimage.c +++ b/drivers/ide/siimage.c @@ -1,6 +1,6 @@ /* * Copyright (C) 2001-2002 Andre Hedrick <andre@linux-ide.org> - * Copyright (C) 2003 Red Hat <alan@redhat.com> + * Copyright (C) 2003 Red Hat * Copyright (C) 2007-2008 MontaVista Software, Inc. * Copyright (C) 2007-2008 Bartlomiej Zolnierkiewicz * diff --git a/drivers/ide/tx4938ide.c b/drivers/ide/tx4938ide.c index fa660f931a1..9120063e8f8 100644 --- a/drivers/ide/tx4938ide.c +++ b/drivers/ide/tx4938ide.c @@ -26,12 +26,13 @@ static void tx4938ide_tune_ebusc(unsigned int ebus_ch, unsigned int sp = (cr >> 4) & 3; unsigned int clock = gbus_clock / (4 - sp); unsigned int cycle = 1000000000 / clock; - unsigned int wt, shwt; + unsigned int shwt; + int wt; /* Minimum DIOx- active time */ wt = DIV_ROUND_UP(t->act8b, cycle) - 2; /* IORDY setup time: 35ns */ - wt = max(wt, DIV_ROUND_UP(35, cycle)); + wt = max_t(int, wt, DIV_ROUND_UP(35, cycle)); /* actual wait-cycle is max(wt & ~1, 1) */ if (wt > 2 && (wt & 1)) wt++; @@ -39,10 +40,17 @@ static void tx4938ide_tune_ebusc(unsigned int ebus_ch, /* Address-valid to DIOR/DIOW setup */ shwt = DIV_ROUND_UP(t->setup, cycle); + /* -DIOx recovery time (SHWT * 4) and cycle time requirement */ + while ((shwt * 4 + wt + (wt ? 2 : 3)) * cycle < t->cycle) + shwt++; + if (shwt > 7) { + pr_warning("tx4938ide: SHWT violation (%d)\n", shwt); + shwt = 7; + } pr_debug("tx4938ide: ebus %d, bus cycle %dns, WT %d, SHWT %d\n", ebus_ch, cycle, wt, shwt); - __raw_writeq((cr & ~(0x3f007ull)) | (wt << 12) | shwt, + __raw_writeq((cr & ~0x3f007ull) | (wt << 12) | shwt, &tx4938_ebuscptr->cr[ebus_ch]); } @@ -228,7 +236,7 @@ static int __init tx4938ide_probe(struct platform_device *pdev) struct resource *res; struct tx4938ide_platform_info *pdata = pdev->dev.platform_data; int irq, ret, i; - unsigned long mapbase; + unsigned long mapbase, mapctl; struct ide_port_info d = tx4938ide_port_info; irq = platform_get_irq(pdev, 0); @@ -242,38 +250,43 @@ static int __init tx4938ide_probe(struct platform_device *pdev) res->end - res->start + 1, "tx4938ide")) return -EBUSY; mapbase = (unsigned long)devm_ioremap(&pdev->dev, res->start, - res->end - res->start + 1); - if (!mapbase) + 8 << pdata->ioport_shift); + mapctl = (unsigned long)devm_ioremap(&pdev->dev, + res->start + 0x10000 + + (6 << pdata->ioport_shift), + 1 << pdata->ioport_shift); + if (!mapbase || !mapctl) return -EBUSY; memset(&hw, 0, sizeof(hw)); if (pdata->ioport_shift) { unsigned long port = mapbase; + unsigned long ctl = mapctl; hw.io_ports_array[0] = port; #ifdef __BIG_ENDIAN port++; + ctl++; #endif for (i = 1; i <= 7; i++) hw.io_ports_array[i] = port + (i << pdata->ioport_shift); - hw.io_ports.ctl_addr = - port + 0x10000 + (6 << pdata->ioport_shift); + hw.io_ports.ctl_addr = ctl; } else - ide_std_init_ports(&hw, mapbase, mapbase + 0x10006); + ide_std_init_ports(&hw, mapbase, mapctl); hw.irq = irq; hw.dev = &pdev->dev; - pr_info("TX4938 IDE interface (base %#lx, irq %d)\n", mapbase, hw.irq); + pr_info("TX4938 IDE interface (base %#lx, ctl %#lx, irq %d)\n", + mapbase, mapctl, hw.irq); if (pdata->gbus_clock) tx4938ide_tune_ebusc(pdata->ebus_ch, pdata->gbus_clock, 0); else d.port_ops = NULL; ret = ide_host_add(&d, hws, &host); - if (ret) - return ret; - platform_set_drvdata(pdev, host); - return 0; + if (!ret) + platform_set_drvdata(pdev, host); + return ret; } static int __exit tx4938ide_remove(struct platform_device *pdev) diff --git a/drivers/idle/Kconfig b/drivers/idle/Kconfig index f5b26dd579e..108264de0ac 100644 --- a/drivers/idle/Kconfig +++ b/drivers/idle/Kconfig @@ -5,12 +5,13 @@ config I7300_IDLE_IOAT_CHANNEL bool config I7300_IDLE - tristate "Intel chipset idle power saving driver" + tristate "Intel chipset idle memory power saving driver" select I7300_IDLE_IOAT_CHANNEL - depends on X86_64 + depends on X86_64 && EXPERIMENTAL help - Enable idle power savings with certain Intel server chipsets. - The chipset must have I/O AT support, such as the Intel 7300. - The power savings depends on the type and quantity of DRAM devices. + Enable memory power savings when idle with certain Intel server + chipsets. The chipset must have I/O AT support, such as the + Intel 7300. The power savings depends on the type and quantity of + DRAM devices. endmenu diff --git a/drivers/idle/i7300_idle.c b/drivers/idle/i7300_idle.c index 59d1bbc3cd3..fb176f6ef9f 100644 --- a/drivers/idle/i7300_idle.c +++ b/drivers/idle/i7300_idle.c @@ -25,6 +25,7 @@ #include <linux/delay.h> #include <linux/debugfs.h> #include <linux/stop_machine.h> +#include <linux/i7300_idle.h> #include <asm/idle.h> @@ -34,6 +35,8 @@ #define I7300_IDLE_DRIVER_VERSION "1.55" #define I7300_PRINT "i7300_idle:" +#define MAX_STOP_RETRIES 10 + static int debug; module_param_named(debug, debug, uint, 0644); MODULE_PARM_DESC(debug, "Enable debug printks in this driver"); @@ -46,12 +49,12 @@ MODULE_PARM_DESC(debug, "Enable debug printks in this driver"); * 0 = No throttling * 1 = Throttle when > 4 activations per eval window (Maximum throttling) * 2 = Throttle when > 8 activations - * 168 = Throttle when > 168 activations (Minimum throttling) + * 168 = Throttle when > 672 activations (Minimum throttling) */ -#define MAX_THRTLWLIMIT 168 -static uint i7300_idle_thrtlowlm = 1; -module_param_named(thrtlwlimit, i7300_idle_thrtlowlm, uint, 0644); -MODULE_PARM_DESC(thrtlwlimit, +#define MAX_THROTTLE_LOW_LIMIT 168 +static uint throttle_low_limit = 1; +module_param_named(throttle_low_limit, throttle_low_limit, uint, 0644); +MODULE_PARM_DESC(throttle_low_limit, "Value for THRTLOWLM activation field " "(0 = disable throttle, 1 = Max throttle, 168 = Min throttle)"); @@ -110,9 +113,9 @@ static int i7300_idle_ioat_start(void) static void i7300_idle_ioat_stop(void) { int i; - u8 sts; + u64 sts; - for (i = 0; i < 5; i++) { + for (i = 0; i < MAX_STOP_RETRIES; i++) { writeb(IOAT_CHANCMD_RESET, ioat_chanbase + IOAT1_CHANCMD_OFFSET); @@ -126,9 +129,10 @@ static void i7300_idle_ioat_stop(void) } - if (i == 5) - dprintk("failed to suspend+reset I/O AT after 5 retries\n"); - + if (i == MAX_STOP_RETRIES) { + dprintk("failed to stop I/O AT after %d retries\n", + MAX_STOP_RETRIES); + } } /* Test I/O AT by copying 1024 byte from 2k to 1k */ @@ -275,7 +279,7 @@ static void __exit i7300_idle_ioat_exit(void) i7300_idle_ioat_stop(); /* Wait for a while for the channel to halt before releasing */ - for (i = 0; i < 10; i++) { + for (i = 0; i < MAX_STOP_RETRIES; i++) { writeb(IOAT_CHANCMD_RESET, ioat_chanbase + IOAT1_CHANCMD_OFFSET); @@ -389,9 +393,9 @@ static void i7300_idle_start(void) new_ctl = i7300_idle_thrtctl_saved & ~DIMM_THRTCTL_THRMHUNT; pci_write_config_byte(fbd_dev, DIMM_THRTCTL, new_ctl); - limit = i7300_idle_thrtlowlm; - if (unlikely(limit > MAX_THRTLWLIMIT)) - limit = MAX_THRTLWLIMIT; + limit = throttle_low_limit; + if (unlikely(limit > MAX_THROTTLE_LOW_LIMIT)) + limit = MAX_THROTTLE_LOW_LIMIT; pci_write_config_byte(fbd_dev, DIMM_THRTLOW, limit); @@ -440,7 +444,7 @@ static int i7300_idle_notifier(struct notifier_block *nb, unsigned long val, static ktime_t idle_begin_time; static int time_init = 1; - if (!i7300_idle_thrtlowlm) + if (!throttle_low_limit) return 0; if (unlikely(time_init)) { @@ -505,77 +509,8 @@ static struct notifier_block i7300_idle_nb = { .notifier_call = i7300_idle_notifier, }; -/* - * I/O AT controls (PCI bus 0 device 8 function 0) - * DIMM controls (PCI bus 0 device 16 function 1) - */ -#define IOAT_BUS 0 -#define IOAT_DEVFN PCI_DEVFN(8, 0) -#define MEMCTL_BUS 0 -#define MEMCTL_DEVFN PCI_DEVFN(16, 1) - -struct fbd_ioat { - unsigned int vendor; - unsigned int ioat_dev; -}; - -/* - * The i5000 chip-set has the same hooks as the i7300 - * but support is disabled by default because this driver - * has not been validated on that platform. - */ -#define SUPPORT_I5000 0 - -static const struct fbd_ioat fbd_ioat_list[] = { - {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT_CNB}, -#if SUPPORT_I5000 - {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT}, -#endif - {0, 0} -}; - -/* table of devices that work with this driver */ -static const struct pci_device_id pci_tbl[] = { - { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_FBD_CNB) }, -#if SUPPORT_I5000 - { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_5000_ERR) }, -#endif - { } /* Terminating entry */ -}; - MODULE_DEVICE_TABLE(pci, pci_tbl); -/* Check for known platforms with I/O-AT */ -static int __init i7300_idle_platform_probe(void) -{ - int i; - - fbd_dev = pci_get_bus_and_slot(MEMCTL_BUS, MEMCTL_DEVFN); - if (!fbd_dev) - return -ENODEV; - - for (i = 0; pci_tbl[i].vendor != 0; i++) { - if (fbd_dev->vendor == pci_tbl[i].vendor && - fbd_dev->device == pci_tbl[i].device) { - break; - } - } - if (pci_tbl[i].vendor == 0) - return -ENODEV; - - ioat_dev = pci_get_bus_and_slot(IOAT_BUS, IOAT_DEVFN); - if (!ioat_dev) - return -ENODEV; - - for (i = 0; fbd_ioat_list[i].vendor != 0; i++) { - if (ioat_dev->vendor == fbd_ioat_list[i].vendor && - ioat_dev->device == fbd_ioat_list[i].ioat_dev) { - return 0; - } - } - return -ENODEV; -} - int stats_open_generic(struct inode *inode, struct file *fp) { fp->private_data = inode->i_private; @@ -617,7 +552,7 @@ static int __init i7300_idle_init(void) cpus_clear(idle_cpumask); total_us = 0; - if (i7300_idle_platform_probe()) + if (i7300_idle_platform_probe(&fbd_dev, &ioat_dev)) return -ENODEV; if (i7300_idle_thrt_save()) diff --git a/drivers/ieee1394/dv1394.c b/drivers/ieee1394/dv1394.c index 2f83543a9df..c19f2326715 100644 --- a/drivers/ieee1394/dv1394.c +++ b/drivers/ieee1394/dv1394.c @@ -1270,8 +1270,14 @@ static int dv1394_mmap(struct file *file, struct vm_area_struct *vma) struct video_card *video = file_to_video_card(file); int retval = -EINVAL; - /* serialize mmap */ - mutex_lock(&video->mtx); + /* + * We cannot use the blocking variant mutex_lock here because .mmap + * is called with mmap_sem held, while .ioctl, .read, .write acquire + * video->mtx and subsequently call copy_to/from_user which will + * grab mmap_sem in case of a page fault. + */ + if (!mutex_trylock(&video->mtx)) + return -EAGAIN; if ( ! video_card_initialized(video) ) { retval = do_dv1394_init_default(video); @@ -1828,9 +1834,6 @@ static int dv1394_release(struct inode *inode, struct file *file) /* OK to free the DMA buffer, no more mappings can exist */ do_dv1394_shutdown(video, 1); - /* clean up async I/O users */ - dv1394_fasync(-1, file, 0); - /* give someone else a turn */ clear_bit(0, &video->open); diff --git a/drivers/ieee1394/hosts.c b/drivers/ieee1394/hosts.c index 8dd09d85041..237d0c9d69c 100644 --- a/drivers/ieee1394/hosts.c +++ b/drivers/ieee1394/hosts.c @@ -155,11 +155,11 @@ struct hpsb_host *hpsb_alloc_host(struct hpsb_host_driver *drv, size_t extra, memcpy(&h->device, &nodemgr_dev_template_host, sizeof(h->device)); h->device.parent = dev; set_dev_node(&h->device, dev_to_node(dev)); - snprintf(h->device.bus_id, BUS_ID_SIZE, "fw-host%d", h->id); + dev_set_name(&h->device, "fw-host%d", h->id); h->host_dev.parent = &h->device; h->host_dev.class = &hpsb_host_class; - snprintf(h->host_dev.bus_id, BUS_ID_SIZE, "fw-host%d", h->id); + dev_set_name(&h->host_dev, "fw-host%d", h->id); if (device_register(&h->device)) goto fail; diff --git a/drivers/ieee1394/nodemgr.c b/drivers/ieee1394/nodemgr.c index 2376b729e87..9e39f73282e 100644 --- a/drivers/ieee1394/nodemgr.c +++ b/drivers/ieee1394/nodemgr.c @@ -826,13 +826,11 @@ static struct node_entry *nodemgr_create_node(octlet_t guid, memcpy(&ne->device, &nodemgr_dev_template_ne, sizeof(ne->device)); ne->device.parent = &host->device; - snprintf(ne->device.bus_id, BUS_ID_SIZE, "%016Lx", - (unsigned long long)(ne->guid)); + dev_set_name(&ne->device, "%016Lx", (unsigned long long)(ne->guid)); ne->node_dev.parent = &ne->device; ne->node_dev.class = &nodemgr_ne_class; - snprintf(ne->node_dev.bus_id, BUS_ID_SIZE, "%016Lx", - (unsigned long long)(ne->guid)); + dev_set_name(&ne->node_dev, "%016Lx", (unsigned long long)(ne->guid)); if (device_register(&ne->device)) goto fail_devreg; @@ -932,13 +930,11 @@ static void nodemgr_register_device(struct node_entry *ne, ud->device.parent = parent; - snprintf(ud->device.bus_id, BUS_ID_SIZE, "%s-%u", - ne->device.bus_id, ud->id); + dev_set_name(&ud->device, "%s-%u", dev_name(&ne->device), ud->id); ud->unit_dev.parent = &ud->device; ud->unit_dev.class = &nodemgr_ud_class; - snprintf(ud->unit_dev.bus_id, BUS_ID_SIZE, "%s-%u", - ne->device.bus_id, ud->id); + dev_set_name(&ud->unit_dev, "%s-%u", dev_name(&ne->device), ud->id); if (device_register(&ud->device)) goto fail_devreg; @@ -953,7 +949,7 @@ static void nodemgr_register_device(struct node_entry *ne, fail_classdevreg: device_unregister(&ud->device); fail_devreg: - HPSB_ERR("Failed to create unit %s", ud->device.bus_id); + HPSB_ERR("Failed to create unit %s", dev_name(&ud->device)); } diff --git a/drivers/ieee1394/raw1394.c b/drivers/ieee1394/raw1394.c index 9f19ac49210..bf7e761c12b 100644 --- a/drivers/ieee1394/raw1394.c +++ b/drivers/ieee1394/raw1394.c @@ -2268,7 +2268,8 @@ static ssize_t raw1394_write(struct file *file, const char __user * buffer, return -EFAULT; } - mutex_lock(&fi->state_mutex); + if (!mutex_trylock(&fi->state_mutex)) + return -EAGAIN; switch (fi->state) { case opened: @@ -2548,7 +2549,8 @@ static int raw1394_mmap(struct file *file, struct vm_area_struct *vma) struct file_info *fi = file->private_data; int ret; - mutex_lock(&fi->state_mutex); + if (!mutex_trylock(&fi->state_mutex)) + return -EAGAIN; if (fi->iso_state == RAW1394_ISO_INACTIVE) ret = -EINVAL; @@ -2669,7 +2671,8 @@ static long raw1394_ioctl(struct file *file, unsigned int cmd, break; } - mutex_lock(&fi->state_mutex); + if (!mutex_trylock(&fi->state_mutex)) + return -EAGAIN; switch (fi->iso_state) { case RAW1394_ISO_INACTIVE: diff --git a/drivers/infiniband/core/uverbs_main.c b/drivers/infiniband/core/uverbs_main.c index d85af1b6702..eb36a81dd09 100644 --- a/drivers/infiniband/core/uverbs_main.c +++ b/drivers/infiniband/core/uverbs_main.c @@ -358,8 +358,6 @@ static int ib_uverbs_event_close(struct inode *inode, struct file *filp) } spin_unlock_irq(&file->lock); - ib_uverbs_event_fasync(-1, filp, 0); - if (file->is_async) { ib_unregister_event_handler(&file->uverbs_file->event_handler); kref_put(&file->uverbs_file->ref, ib_uverbs_release_file); diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c index 3524bef62be..1070db330d3 100644 --- a/drivers/input/evdev.c +++ b/drivers/input/evdev.c @@ -235,7 +235,6 @@ static int evdev_release(struct inode *inode, struct file *file) evdev_ungrab(evdev, client); mutex_unlock(&evdev->mutex); - evdev_fasync(-1, file, 0); evdev_detach_client(evdev, client); kfree(client); diff --git a/drivers/input/joydev.c b/drivers/input/joydev.c index 65d7077a75a..a85b1485e77 100644 --- a/drivers/input/joydev.c +++ b/drivers/input/joydev.c @@ -244,7 +244,6 @@ static int joydev_release(struct inode *inode, struct file *file) struct joydev_client *client = file->private_data; struct joydev *joydev = client->joydev; - joydev_fasync(-1, file, 0); joydev_detach_client(joydev, client); kfree(client); diff --git a/drivers/input/misc/hp_sdc_rtc.c b/drivers/input/misc/hp_sdc_rtc.c index 82ec6b1b646..216a559f55e 100644 --- a/drivers/input/misc/hp_sdc_rtc.c +++ b/drivers/input/misc/hp_sdc_rtc.c @@ -71,7 +71,6 @@ static int hp_sdc_rtc_ioctl(struct inode *inode, struct file *file, static unsigned int hp_sdc_rtc_poll(struct file *file, poll_table *wait); static int hp_sdc_rtc_open(struct inode *inode, struct file *file); -static int hp_sdc_rtc_release(struct inode *inode, struct file *file); static int hp_sdc_rtc_fasync (int fd, struct file *filp, int on); static int hp_sdc_rtc_read_proc(char *page, char **start, off_t off, @@ -414,17 +413,6 @@ static int hp_sdc_rtc_open(struct inode *inode, struct file *file) return 0; } -static int hp_sdc_rtc_release(struct inode *inode, struct file *file) -{ - /* Turn off interrupts? */ - - if (file->f_flags & FASYNC) { - hp_sdc_rtc_fasync (-1, file, 0); - } - - return 0; -} - static int hp_sdc_rtc_fasync (int fd, struct file *filp, int on) { return fasync_helper (fd, filp, on, &hp_sdc_rtc_async_queue); @@ -680,7 +668,6 @@ static const struct file_operations hp_sdc_rtc_fops = { .poll = hp_sdc_rtc_poll, .ioctl = hp_sdc_rtc_ioctl, .open = hp_sdc_rtc_open, - .release = hp_sdc_rtc_release, .fasync = hp_sdc_rtc_fasync, }; diff --git a/drivers/input/misc/sgi_btns.c b/drivers/input/misc/sgi_btns.c index ce238f59b3c..be3a15f5b25 100644 --- a/drivers/input/misc/sgi_btns.c +++ b/drivers/input/misc/sgi_btns.c @@ -174,5 +174,6 @@ static void __exit sgi_buttons_exit(void) platform_driver_unregister(&sgi_buttons_driver); } +MODULE_LICENSE("GPL"); module_init(sgi_buttons_init); module_exit(sgi_buttons_exit); diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig index f488b6852ba..4e993425977 100644 --- a/drivers/input/mouse/Kconfig +++ b/drivers/input/mouse/Kconfig @@ -25,8 +25,8 @@ config MOUSE_PS2 mice with wheels and extra buttons, Microsoft, Logitech or Genius compatible. - Synaptics TouchPad users might be interested in a specialized - XFree86 driver at: + Synaptics, ALPS or Elantech TouchPad users might be interested + in a specialized Xorg/XFree86 driver at: <http://w1.894.telia.com/~u89404340/touchpad/index.html> and a new version of GPM at: <http://www.geocities.com/dt_or/gpm/gpm.html> @@ -87,6 +87,27 @@ config MOUSE_PS2_TRACKPOINT If unsure, say Y. +config MOUSE_PS2_ELANTECH + bool "Elantech PS/2 protocol extension" + depends on MOUSE_PS2 + help + Say Y here if you have an Elantech PS/2 touchpad connected + to your system. + + Note that if you enable this driver you will need an updated + X.org Synaptics driver that does not require ABS_PRESSURE + reports from the touchpad (i.e. post 1.5.0 version). You can + grab a patch for the driver here: + + http://userweb.kernel.org/~dtor/synaptics-no-abspressure.patch + + If unsure, say N. + + This driver exposes some configuration registers via sysfs + entries. For further information, + see <file:Documentation/input/elantech.txt>. + + config MOUSE_PS2_TOUCHKIT bool "eGalax TouchKit PS/2 protocol extension" depends on MOUSE_PS2 diff --git a/drivers/input/mouse/Makefile b/drivers/input/mouse/Makefile index 8e6e6909780..96f1dd8037f 100644 --- a/drivers/input/mouse/Makefile +++ b/drivers/input/mouse/Makefile @@ -21,6 +21,7 @@ obj-$(CONFIG_MOUSE_GPIO) += gpio_mouse.o psmouse-objs := psmouse-base.o synaptics.o psmouse-$(CONFIG_MOUSE_PS2_ALPS) += alps.o +psmouse-$(CONFIG_MOUSE_PS2_ELANTECH) += elantech.o psmouse-$(CONFIG_MOUSE_PS2_OLPC) += hgpk.o psmouse-$(CONFIG_MOUSE_PS2_LOGIPS2PP) += logips2pp.o psmouse-$(CONFIG_MOUSE_PS2_LIFEBOOK) += lifebook.o diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c new file mode 100644 index 00000000000..b9a25d57bc5 --- /dev/null +++ b/drivers/input/mouse/elantech.c @@ -0,0 +1,674 @@ +/* + * Elantech Touchpad driver (v5) + * + * Copyright (C) 2007-2008 Arjan Opmeer <arjan@opmeer.net> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Trademarks are the property of their respective owners. + */ + +#include <linux/delay.h> +#include <linux/module.h> +#include <linux/input.h> +#include <linux/serio.h> +#include <linux/libps2.h> +#include "psmouse.h" +#include "elantech.h" + +#define elantech_debug(format, arg...) \ + do { \ + if (etd->debug) \ + printk(KERN_DEBUG format, ##arg); \ + } while (0) + +/* + * Send a Synaptics style sliced query command + */ +static int synaptics_send_cmd(struct psmouse *psmouse, unsigned char c, + unsigned char *param) +{ + if (psmouse_sliced_command(psmouse, c) || + ps2_command(&psmouse->ps2dev, param, PSMOUSE_CMD_GETINFO)) { + pr_err("elantech.c: synaptics_send_cmd query 0x%02x failed.\n", c); + return -1; + } + + return 0; +} + +/* + * A retrying version of ps2_command + */ +static int elantech_ps2_command(struct psmouse *psmouse, + unsigned char *param, int command) +{ + struct ps2dev *ps2dev = &psmouse->ps2dev; + struct elantech_data *etd = psmouse->private; + int rc; + int tries = ETP_PS2_COMMAND_TRIES; + + do { + rc = ps2_command(ps2dev, param, command); + if (rc == 0) + break; + tries--; + elantech_debug("elantech.c: retrying ps2 command 0x%02x (%d).\n", + command, tries); + msleep(ETP_PS2_COMMAND_DELAY); + } while (tries > 0); + + if (rc) + pr_err("elantech.c: ps2 command 0x%02x failed.\n", command); + + return rc; +} + +/* + * Send an Elantech style special command to read a value from a register + */ +static int elantech_read_reg(struct psmouse *psmouse, unsigned char reg, + unsigned char *val) +{ + struct elantech_data *etd = psmouse->private; + unsigned char param[3]; + int rc = 0; + + if (reg < 0x10 || reg > 0x26) + return -1; + + if (reg > 0x11 && reg < 0x20) + return -1; + + switch (etd->hw_version) { + case 1: + if (psmouse_sliced_command(psmouse, ETP_REGISTER_READ) || + psmouse_sliced_command(psmouse, reg) || + ps2_command(&psmouse->ps2dev, param, PSMOUSE_CMD_GETINFO)) { + rc = -1; + } + break; + + case 2: + if (elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) || + elantech_ps2_command(psmouse, NULL, ETP_REGISTER_READ) || + elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) || + elantech_ps2_command(psmouse, NULL, reg) || + elantech_ps2_command(psmouse, param, PSMOUSE_CMD_GETINFO)) { + rc = -1; + } + break; + } + + if (rc) + pr_err("elantech.c: failed to read register 0x%02x.\n", reg); + else + *val = param[0]; + + return rc; +} + +/* + * Send an Elantech style special command to write a register with a value + */ +static int elantech_write_reg(struct psmouse *psmouse, unsigned char reg, + unsigned char val) +{ + struct elantech_data *etd = psmouse->private; + int rc = 0; + + if (reg < 0x10 || reg > 0x26) + return -1; + + if (reg > 0x11 && reg < 0x20) + return -1; + + switch (etd->hw_version) { + case 1: + if (psmouse_sliced_command(psmouse, ETP_REGISTER_WRITE) || + psmouse_sliced_command(psmouse, reg) || + psmouse_sliced_command(psmouse, val) || + ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_SETSCALE11)) { + rc = -1; + } + break; + + case 2: + if (elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) || + elantech_ps2_command(psmouse, NULL, ETP_REGISTER_WRITE) || + elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) || + elantech_ps2_command(psmouse, NULL, reg) || + elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) || + elantech_ps2_command(psmouse, NULL, val) || + elantech_ps2_command(psmouse, NULL, PSMOUSE_CMD_SETSCALE11)) { + rc = -1; + } + break; + } + + if (rc) + pr_err("elantech.c: failed to write register 0x%02x with value 0x%02x.\n", + reg, val); + + return rc; +} + +/* + * Dump a complete mouse movement packet to the syslog + */ +static void elantech_packet_dump(unsigned char *packet, int size) +{ + int i; + + printk(KERN_DEBUG "elantech.c: PS/2 packet ["); + for (i = 0; i < size; i++) + printk("%s0x%02x ", (i) ? ", " : " ", packet[i]); + printk("]\n"); +} + +/* + * Interpret complete data packets and report absolute mode input events for + * hardware version 1. (4 byte packets) + */ +static void elantech_report_absolute_v1(struct psmouse *psmouse) +{ + struct input_dev *dev = psmouse->dev; + struct elantech_data *etd = psmouse->private; + unsigned char *packet = psmouse->packet; + int fingers; + + if (etd->fw_version_maj == 0x01) { + /* byte 0: D U p1 p2 1 p3 R L + byte 1: f 0 th tw x9 x8 y9 y8 */ + fingers = ((packet[1] & 0x80) >> 7) + + ((packet[1] & 0x30) >> 4); + } else { + /* byte 0: n1 n0 p2 p1 1 p3 R L + byte 1: 0 0 0 0 x9 x8 y9 y8 */ + fingers = (packet[0] & 0xc0) >> 6; + } + + input_report_key(dev, BTN_TOUCH, fingers != 0); + + /* byte 2: x7 x6 x5 x4 x3 x2 x1 x0 + byte 3: y7 y6 y5 y4 y3 y2 y1 y0 */ + if (fingers) { + input_report_abs(dev, ABS_X, + ((packet[1] & 0x0c) << 6) | packet[2]); + input_report_abs(dev, ABS_Y, ETP_YMAX_V1 - + (((packet[1] & 0x03) << 8) | packet[3])); + } + + input_report_key(dev, BTN_TOOL_FINGER, fingers == 1); + input_report_key(dev, BTN_TOOL_DOUBLETAP, fingers == 2); + input_report_key(dev, BTN_TOOL_TRIPLETAP, fingers == 3); + input_report_key(dev, BTN_LEFT, packet[0] & 0x01); + input_report_key(dev, BTN_RIGHT, packet[0] & 0x02); + + if ((etd->fw_version_maj == 0x01) && + (etd->capabilities & ETP_CAP_HAS_ROCKER)) { + /* rocker up */ + input_report_key(dev, BTN_FORWARD, packet[0] & 0x40); + /* rocker down */ + input_report_key(dev, BTN_BACK, packet[0] & 0x80); + } + + input_sync(dev); +} + +/* + * Interpret complete data packets and report absolute mode input events for + * hardware version 2. (6 byte packets) + */ +static void elantech_report_absolute_v2(struct psmouse *psmouse) +{ + struct input_dev *dev = psmouse->dev; + unsigned char *packet = psmouse->packet; + int fingers, x1, y1, x2, y2; + + /* byte 0: n1 n0 . . . . R L */ + fingers = (packet[0] & 0xc0) >> 6; + input_report_key(dev, BTN_TOUCH, fingers != 0); + + switch (fingers) { + case 1: + /* byte 1: x15 x14 x13 x12 x11 x10 x9 x8 + byte 2: x7 x6 x5 x4 x4 x2 x1 x0 */ + input_report_abs(dev, ABS_X, (packet[1] << 8) | packet[2]); + /* byte 4: y15 y14 y13 y12 y11 y10 y8 y8 + byte 5: y7 y6 y5 y4 y3 y2 y1 y0 */ + input_report_abs(dev, ABS_Y, ETP_YMAX_V2 - + ((packet[4] << 8) | packet[5])); + break; + + case 2: + /* The coordinate of each finger is reported separately with + a lower resolution for two finger touches */ + /* byte 0: . . ay8 ax8 . . . . + byte 1: ax7 ax6 ax5 ax4 ax3 ax2 ax1 ax0 */ + x1 = ((packet[0] & 0x10) << 4) | packet[1]; + /* byte 2: ay7 ay6 ay5 ay4 ay3 ay2 ay1 ay0 */ + y1 = ETP_2FT_YMAX - (((packet[0] & 0x20) << 3) | packet[2]); + /* byte 3: . . by8 bx8 . . . . + byte 4: bx7 bx6 bx5 bx4 bx3 bx2 bx1 bx0 */ + x2 = ((packet[3] & 0x10) << 4) | packet[4]; + /* byte 5: by7 by8 by5 by4 by3 by2 by1 by0 */ + y2 = ETP_2FT_YMAX - (((packet[3] & 0x20) << 3) | packet[5]); + /* For compatibility with the X Synaptics driver scale up one + coordinate and report as ordinary mouse movent */ + input_report_abs(dev, ABS_X, x1 << 2); + input_report_abs(dev, ABS_Y, y1 << 2); + /* For compatibility with the proprietary X Elantech driver + report both coordinates as hat coordinates */ + input_report_abs(dev, ABS_HAT0X, x1); + input_report_abs(dev, ABS_HAT0Y, y1); + input_report_abs(dev, ABS_HAT1X, x2); + input_report_abs(dev, ABS_HAT1Y, y2); + break; + } + + input_report_key(dev, BTN_TOOL_FINGER, fingers == 1); + input_report_key(dev, BTN_TOOL_DOUBLETAP, fingers == 2); + input_report_key(dev, BTN_TOOL_TRIPLETAP, fingers == 3); + input_report_key(dev, BTN_LEFT, packet[0] & 0x01); + input_report_key(dev, BTN_RIGHT, packet[0] & 0x02); + + input_sync(dev); +} + +static int elantech_check_parity_v1(struct psmouse *psmouse) +{ + struct elantech_data *etd = psmouse->private; + unsigned char *packet = psmouse->packet; + unsigned char p1, p2, p3; + + /* Parity bits are placed differently */ + if (etd->fw_version_maj == 0x01) { + /* byte 0: D U p1 p2 1 p3 R L */ + p1 = (packet[0] & 0x20) >> 5; + p2 = (packet[0] & 0x10) >> 4; + } else { + /* byte 0: n1 n0 p2 p1 1 p3 R L */ + p1 = (packet[0] & 0x10) >> 4; + p2 = (packet[0] & 0x20) >> 5; + } + + p3 = (packet[0] & 0x04) >> 2; + + return etd->parity[packet[1]] == p1 && + etd->parity[packet[2]] == p2 && + etd->parity[packet[3]] == p3; +} + +/* + * Process byte stream from mouse and handle complete packets + */ +static psmouse_ret_t elantech_process_byte(struct psmouse *psmouse) +{ + struct elantech_data *etd = psmouse->private; + + if (psmouse->pktcnt < psmouse->pktsize) + return PSMOUSE_GOOD_DATA; + + if (etd->debug > 1) + elantech_packet_dump(psmouse->packet, psmouse->pktsize); + + switch (etd->hw_version) { + case 1: + if (etd->paritycheck && !elantech_check_parity_v1(psmouse)) + return PSMOUSE_BAD_DATA; + + elantech_report_absolute_v1(psmouse); + break; + + case 2: + /* We don't know how to check parity in protocol v2 */ + elantech_report_absolute_v2(psmouse); + break; + } + + return PSMOUSE_FULL_PACKET; +} + +/* + * Put the touchpad into absolute mode + */ +static int elantech_set_absolute_mode(struct psmouse *psmouse) +{ + struct elantech_data *etd = psmouse->private; + unsigned char val; + int tries = ETP_READ_BACK_TRIES; + int rc = 0; + + switch (etd->hw_version) { + case 1: + etd->reg_10 = 0x16; + etd->reg_11 = 0x8f; + if (elantech_write_reg(psmouse, 0x10, etd->reg_10) || + elantech_write_reg(psmouse, 0x11, etd->reg_11)) { + rc = -1; + } + break; + + case 2: + /* Windows driver values */ + etd->reg_10 = 0x54; + etd->reg_11 = 0x88; /* 0x8a */ + etd->reg_21 = 0x60; /* 0x00 */ + if (elantech_write_reg(psmouse, 0x10, etd->reg_10) || + elantech_write_reg(psmouse, 0x11, etd->reg_11) || + elantech_write_reg(psmouse, 0x21, etd->reg_21)) { + rc = -1; + break; + } + /* + * Read back reg 0x10. The touchpad is probably initalising + * and not ready until we read back the value we just wrote. + */ + do { + rc = elantech_read_reg(psmouse, 0x10, &val); + if (rc == 0) + break; + tries--; + elantech_debug("elantech.c: retrying read (%d).\n", + tries); + msleep(ETP_READ_BACK_DELAY); + } while (tries > 0); + if (rc) + pr_err("elantech.c: failed to read back register 0x10.\n"); + break; + } + + if (rc) + pr_err("elantech.c: failed to initialise registers.\n"); + + return rc; +} + +/* + * Set the appropriate event bits for the input subsystem + */ +static void elantech_set_input_params(struct psmouse *psmouse) +{ + struct input_dev *dev = psmouse->dev; + struct elantech_data *etd = psmouse->private; + + __set_bit(EV_KEY, dev->evbit); + __set_bit(EV_ABS, dev->evbit); + + __set_bit(BTN_LEFT, dev->keybit); + __set_bit(BTN_RIGHT, dev->keybit); + + __set_bit(BTN_TOUCH, dev->keybit); + __set_bit(BTN_TOOL_FINGER, dev->keybit); + __set_bit(BTN_TOOL_DOUBLETAP, dev->keybit); + __set_bit(BTN_TOOL_TRIPLETAP, dev->keybit); + + switch (etd->hw_version) { + case 1: + /* Rocker button */ + if ((etd->fw_version_maj == 0x01) && + (etd->capabilities & ETP_CAP_HAS_ROCKER)) { + __set_bit(BTN_FORWARD, dev->keybit); + __set_bit(BTN_BACK, dev->keybit); + } + input_set_abs_params(dev, ABS_X, ETP_XMIN_V1, ETP_XMAX_V1, 0, 0); + input_set_abs_params(dev, ABS_Y, ETP_YMIN_V1, ETP_YMAX_V1, 0, 0); + break; + + case 2: + input_set_abs_params(dev, ABS_X, ETP_XMIN_V2, ETP_XMAX_V2, 0, 0); + input_set_abs_params(dev, ABS_Y, ETP_YMIN_V2, ETP_YMAX_V2, 0, 0); + input_set_abs_params(dev, ABS_HAT0X, ETP_2FT_XMIN, ETP_2FT_XMAX, 0, 0); + input_set_abs_params(dev, ABS_HAT0Y, ETP_2FT_YMIN, ETP_2FT_YMAX, 0, 0); + input_set_abs_params(dev, ABS_HAT1X, ETP_2FT_XMIN, ETP_2FT_XMAX, 0, 0); + input_set_abs_params(dev, ABS_HAT1Y, ETP_2FT_YMIN, ETP_2FT_YMAX, 0, 0); + break; + } +} + +struct elantech_attr_data { + size_t field_offset; + unsigned char reg; +}; + +/* + * Display a register value by reading a sysfs entry + */ +static ssize_t elantech_show_int_attr(struct psmouse *psmouse, void *data, + char *buf) +{ + struct elantech_data *etd = psmouse->private; + struct elantech_attr_data *attr = data; + unsigned char *reg = (unsigned char *) etd + attr->field_offset; + int rc = 0; + + if (attr->reg) + rc = elantech_read_reg(psmouse, attr->reg, reg); + + return sprintf(buf, "0x%02x\n", (attr->reg && rc) ? -1 : *reg); +} + +/* + * Write a register value by writing a sysfs entry + */ +static ssize_t elantech_set_int_attr(struct psmouse *psmouse, + void *data, const char *buf, size_t count) +{ + struct elantech_data *etd = psmouse->private; + struct elantech_attr_data *attr = data; + unsigned char *reg = (unsigned char *) etd + attr->field_offset; + unsigned long value; + int err; + + err = strict_strtoul(buf, 16, &value); + if (err) + return err; + + if (value > 0xff) + return -EINVAL; + + /* Do we need to preserve some bits for version 2 hardware too? */ + if (etd->hw_version == 1) { + if (attr->reg == 0x10) + /* Force absolute mode always on */ + value |= ETP_R10_ABSOLUTE_MODE; + else if (attr->reg == 0x11) + /* Force 4 byte mode always on */ + value |= ETP_R11_4_BYTE_MODE; + } + + if (!attr->reg || elantech_write_reg(psmouse, attr->reg, value) == 0) + *reg = value; + + return count; +} + +#define ELANTECH_INT_ATTR(_name, _register) \ + static struct elantech_attr_data elantech_attr_##_name = { \ + .field_offset = offsetof(struct elantech_data, _name), \ + .reg = _register, \ + }; \ + PSMOUSE_DEFINE_ATTR(_name, S_IWUSR | S_IRUGO, \ + &elantech_attr_##_name, \ + elantech_show_int_attr, \ + elantech_set_int_attr) + +ELANTECH_INT_ATTR(reg_10, 0x10); +ELANTECH_INT_ATTR(reg_11, 0x11); +ELANTECH_INT_ATTR(reg_20, 0x20); +ELANTECH_INT_ATTR(reg_21, 0x21); +ELANTECH_INT_ATTR(reg_22, 0x22); +ELANTECH_INT_ATTR(reg_23, 0x23); +ELANTECH_INT_ATTR(reg_24, 0x24); +ELANTECH_INT_ATTR(reg_25, 0x25); +ELANTECH_INT_ATTR(reg_26, 0x26); +ELANTECH_INT_ATTR(debug, 0); +ELANTECH_INT_ATTR(paritycheck, 0); + +static struct attribute *elantech_attrs[] = { + &psmouse_attr_reg_10.dattr.attr, + &psmouse_attr_reg_11.dattr.attr, + &psmouse_attr_reg_20.dattr.attr, + &psmouse_attr_reg_21.dattr.attr, + &psmouse_attr_reg_22.dattr.attr, + &psmouse_attr_reg_23.dattr.attr, + &psmouse_attr_reg_24.dattr.attr, + &psmouse_attr_reg_25.dattr.attr, + &psmouse_attr_reg_26.dattr.attr, + &psmouse_attr_debug.dattr.attr, + &psmouse_attr_paritycheck.dattr.attr, + NULL +}; + +static struct attribute_group elantech_attr_group = { + .attrs = elantech_attrs, +}; + +/* + * Use magic knock to detect Elantech touchpad + */ +int elantech_detect(struct psmouse *psmouse, int set_properties) +{ + struct ps2dev *ps2dev = &psmouse->ps2dev; + unsigned char param[3]; + + ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_RESET_DIS); + + if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) || + ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) || + ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) || + ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) || + ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO)) { + pr_err("elantech.c: sending Elantech magic knock failed.\n"); + return -1; + } + + /* + * Report this in case there are Elantech models that use a different + * set of magic numbers + */ + if (param[0] != 0x3c || param[1] != 0x03 || param[2] != 0xc8) { + pr_info("elantech.c: unexpected magic knock result 0x%02x, 0x%02x, 0x%02x.\n", + param[0], param[1], param[2]); + return -1; + } + + if (set_properties) { + psmouse->vendor = "Elantech"; + psmouse->name = "Touchpad"; + } + + return 0; +} + +/* + * Clean up sysfs entries when disconnecting + */ +static void elantech_disconnect(struct psmouse *psmouse) +{ + sysfs_remove_group(&psmouse->ps2dev.serio->dev.kobj, + &elantech_attr_group); + kfree(psmouse->private); + psmouse->private = NULL; +} + +/* + * Put the touchpad back into absolute mode when reconnecting + */ +static int elantech_reconnect(struct psmouse *psmouse) +{ + if (elantech_detect(psmouse, 0)) + return -1; + + if (elantech_set_absolute_mode(psmouse)) { + pr_err("elantech.c: failed to put touchpad back into absolute mode.\n"); + return -1; + } + + return 0; +} + +/* + * Initialize the touchpad and create sysfs entries + */ +int elantech_init(struct psmouse *psmouse) +{ + struct elantech_data *etd; + int i, error; + unsigned char param[3]; + + etd = kzalloc(sizeof(struct elantech_data), GFP_KERNEL); + psmouse->private = etd; + if (!etd) + return -1; + + etd->parity[0] = 1; + for (i = 1; i < 256; i++) + etd->parity[i] = etd->parity[i & (i - 1)] ^ 1; + + /* + * Find out what version hardware this is + */ + if (synaptics_send_cmd(psmouse, ETP_FW_VERSION_QUERY, param)) { + pr_err("elantech.c: failed to query firmware version.\n"); + goto init_fail; + } + pr_info("elantech.c: Elantech version query result 0x%02x, 0x%02x, 0x%02x.\n", + param[0], param[1], param[2]); + etd->fw_version_maj = param[0]; + etd->fw_version_min = param[2]; + + /* + * Assume every version greater than this is new EeePC style + * hardware with 6 byte packets + */ + if (etd->fw_version_maj >= 0x02 && etd->fw_version_min >= 0x30) { + etd->hw_version = 2; + /* For now show extra debug information */ + etd->debug = 1; + /* Don't know how to do parity checking for version 2 */ + etd->paritycheck = 0; + } else { + etd->hw_version = 1; + etd->paritycheck = 1; + } + pr_info("elantech.c: assuming hardware version %d, firmware version %d.%d\n", + etd->hw_version, etd->fw_version_maj, etd->fw_version_min); + + if (synaptics_send_cmd(psmouse, ETP_CAPABILITIES_QUERY, param)) { + pr_err("elantech.c: failed to query capabilities.\n"); + goto init_fail; + } + pr_info("elantech.c: Synaptics capabilities query result 0x%02x, 0x%02x, 0x%02x.\n", + param[0], param[1], param[2]); + etd->capabilities = param[0]; + + if (elantech_set_absolute_mode(psmouse)) { + pr_err("elantech.c: failed to put touchpad into absolute mode.\n"); + goto init_fail; + } + + elantech_set_input_params(psmouse); + + error = sysfs_create_group(&psmouse->ps2dev.serio->dev.kobj, + &elantech_attr_group); + if (error) { + pr_err("elantech.c: failed to create sysfs attributes, error: %d.\n", + error); + goto init_fail; + } + + psmouse->protocol_handler = elantech_process_byte; + psmouse->disconnect = elantech_disconnect; + psmouse->reconnect = elantech_reconnect; + psmouse->pktsize = etd->hw_version == 2 ? 6 : 4; + + return 0; + + init_fail: + kfree(etd); + return -1; +} diff --git a/drivers/input/mouse/elantech.h b/drivers/input/mouse/elantech.h new file mode 100644 index 00000000000..bee282b540b --- /dev/null +++ b/drivers/input/mouse/elantech.h @@ -0,0 +1,124 @@ +/* + * Elantech Touchpad driver (v5) + * + * Copyright (C) 2007-2008 Arjan Opmeer <arjan@opmeer.net> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Trademarks are the property of their respective owners. + */ + +#ifndef _ELANTECH_H +#define _ELANTECH_H + +/* + * Command values for Synaptics style queries + */ +#define ETP_FW_VERSION_QUERY 0x01 +#define ETP_CAPABILITIES_QUERY 0x02 + +/* + * Command values for register reading or writing + */ +#define ETP_REGISTER_READ 0x10 +#define ETP_REGISTER_WRITE 0x11 + +/* + * Hardware version 2 custom PS/2 command value + */ +#define ETP_PS2_CUSTOM_COMMAND 0xf8 + +/* + * Times to retry a ps2_command and millisecond delay between tries + */ +#define ETP_PS2_COMMAND_TRIES 3 +#define ETP_PS2_COMMAND_DELAY 500 + +/* + * Times to try to read back a register and millisecond delay between tries + */ +#define ETP_READ_BACK_TRIES 5 +#define ETP_READ_BACK_DELAY 2000 + +/* + * Register bitmasks for hardware version 1 + */ +#define ETP_R10_ABSOLUTE_MODE 0x04 +#define ETP_R11_4_BYTE_MODE 0x02 + +/* + * Capability bitmasks + */ +#define ETP_CAP_HAS_ROCKER 0x04 + +/* + * One hard to find application note states that X axis range is 0 to 576 + * and Y axis range is 0 to 384 for harware version 1. + * Edge fuzz might be necessary because of bezel around the touchpad + */ +#define ETP_EDGE_FUZZ_V1 32 + +#define ETP_XMIN_V1 ( 0 + ETP_EDGE_FUZZ_V1) +#define ETP_XMAX_V1 (576 - ETP_EDGE_FUZZ_V1) +#define ETP_YMIN_V1 ( 0 + ETP_EDGE_FUZZ_V1) +#define ETP_YMAX_V1 (384 - ETP_EDGE_FUZZ_V1) + +/* + * It seems the resolution for hardware version 2 doubled. + * Hence the X and Y ranges are doubled too. + * The bezel around the pad also appears to be smaller + */ +#define ETP_EDGE_FUZZ_V2 8 + +#define ETP_XMIN_V2 ( 0 + ETP_EDGE_FUZZ_V2) +#define ETP_XMAX_V2 (1152 - ETP_EDGE_FUZZ_V2) +#define ETP_YMIN_V2 ( 0 + ETP_EDGE_FUZZ_V2) +#define ETP_YMAX_V2 ( 768 - ETP_EDGE_FUZZ_V2) + +/* + * For two finger touches the coordinate of each finger gets reported + * separately but with reduced resolution. + */ +#define ETP_2FT_FUZZ 4 + +#define ETP_2FT_XMIN ( 0 + ETP_2FT_FUZZ) +#define ETP_2FT_XMAX (288 - ETP_2FT_FUZZ) +#define ETP_2FT_YMIN ( 0 + ETP_2FT_FUZZ) +#define ETP_2FT_YMAX (192 - ETP_2FT_FUZZ) + +struct elantech_data { + unsigned char reg_10; + unsigned char reg_11; + unsigned char reg_20; + unsigned char reg_21; + unsigned char reg_22; + unsigned char reg_23; + unsigned char reg_24; + unsigned char reg_25; + unsigned char reg_26; + unsigned char debug; + unsigned char capabilities; + unsigned char fw_version_maj; + unsigned char fw_version_min; + unsigned char hw_version; + unsigned char paritycheck; + unsigned char parity[256]; +}; + +#ifdef CONFIG_MOUSE_PS2_ELANTECH +int elantech_detect(struct psmouse *psmouse, int set_properties); +int elantech_init(struct psmouse *psmouse); +#else +static inline int elantech_detect(struct psmouse *psmouse, int set_properties) +{ + return -ENOSYS; +} +static inline int elantech_init(struct psmouse *psmouse) +{ + return -ENOSYS; +} +#endif /* CONFIG_MOUSE_PS2_ELANTECH */ + +#endif diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c index 126e977e199..f8f86de694b 100644 --- a/drivers/input/mouse/psmouse-base.c +++ b/drivers/input/mouse/psmouse-base.c @@ -29,6 +29,7 @@ #include "lifebook.h" #include "trackpoint.h" #include "touchkit_ps2.h" +#include "elantech.h" #define DRIVER_DESC "PS/2 mouse driver" @@ -650,6 +651,19 @@ static int psmouse_extensions(struct psmouse *psmouse, max_proto = PSMOUSE_IMEX; } +/* + * Try Elantech touchpad. + */ + if (max_proto > PSMOUSE_IMEX && + elantech_detect(psmouse, set_properties) == 0) { + if (!set_properties || elantech_init(psmouse) == 0) + return PSMOUSE_ELANTECH; +/* + * Init failed, try basic relative protocols + */ + max_proto = PSMOUSE_IMEX; + } + if (max_proto > PSMOUSE_IMEX) { if (genius_detect(psmouse, set_properties) == 0) return PSMOUSE_GENPS; @@ -789,6 +803,15 @@ static const struct psmouse_protocol psmouse_protocols[] = { .detect = hgpk_detect, }, #endif +#ifdef CONFIG_MOUSE_PS2_ELANTECH + { + .type = PSMOUSE_ELANTECH, + .name = "ETPS/2", + .alias = "elantech", + .detect = elantech_detect, + .init = elantech_init, + }, + #endif { .type = PSMOUSE_CORTRON, .name = "CortronPS/2", diff --git a/drivers/input/mouse/psmouse.h b/drivers/input/mouse/psmouse.h index 8b608a1cdd1..54ed267894b 100644 --- a/drivers/input/mouse/psmouse.h +++ b/drivers/input/mouse/psmouse.h @@ -90,6 +90,7 @@ enum psmouse_type { PSMOUSE_TOUCHKIT_PS2, PSMOUSE_CORTRON, PSMOUSE_HGPK, + PSMOUSE_ELANTECH, PSMOUSE_AUTO /* This one should always be last */ }; diff --git a/drivers/input/mousedev.c b/drivers/input/mousedev.c index 8137e50ded8..d8c056fe7e9 100644 --- a/drivers/input/mousedev.c +++ b/drivers/input/mousedev.c @@ -519,7 +519,6 @@ static int mousedev_release(struct inode *inode, struct file *file) struct mousedev_client *client = file->private_data; struct mousedev *mousedev = client->mousedev; - mousedev_fasync(-1, file, 0); mousedev_detach_client(mousedev, client); kfree(client); diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h index a321aea2c7b..eec375cd10e 100644 --- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -135,6 +135,14 @@ static struct dmi_system_id __initdata i8042_dmi_noloop_table[] = { DMI_MATCH(DMI_PRODUCT_VERSION, "5a"), }, }, + { + .ident = "Blue FB5601", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "blue"), + DMI_MATCH(DMI_PRODUCT_NAME, "FB5601"), + DMI_MATCH(DMI_PRODUCT_VERSION, "M606"), + }, + }, { } }; diff --git a/drivers/input/serio/serio_raw.c b/drivers/input/serio/serio_raw.c index 470770c0926..06bbd0e74c6 100644 --- a/drivers/input/serio/serio_raw.c +++ b/drivers/input/serio/serio_raw.c @@ -135,7 +135,6 @@ static int serio_raw_release(struct inode *inode, struct file *file) mutex_lock(&serio_raw_mutex); - serio_raw_fasync(-1, file, 0); serio_raw_cleanup(serio_raw); mutex_unlock(&serio_raw_mutex); diff --git a/drivers/leds/leds-da903x.c b/drivers/leds/leds-da903x.c index f1fddb18d70..1f3cc512eff 100644 --- a/drivers/leds/leds-da903x.c +++ b/drivers/leds/leds-da903x.c @@ -17,6 +17,7 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/leds.h> +#include <linux/workqueue.h> #include <linux/mfd/da903x.h> #define DA9030_LED1_CONTROL 0x20 @@ -57,7 +58,7 @@ static void da903x_led_work(struct work_struct *work) offset = DA9030_LED_OFFSET(led->id); val = led->flags & ~0x87; val |= (led->new_brightness) ? 0x80 : 0; /* EN bit */ - val |= (led->new_brightness >> 5) & 0x7; /* PWM<2:0> */ + val |= (0x7 - (led->new_brightness >> 5)) & 0x7; /* PWM<2:0> */ da903x_write(led->master, DA9030_LED1_CONTROL + offset, val); break; case DA9030_ID_VIBRA: diff --git a/drivers/leds/leds-hp-disk.c b/drivers/leds/leds-hp-disk.c index 53a25b1c2da..44fa757d825 100644 --- a/drivers/leds/leds-hp-disk.c +++ b/drivers/leds/leds-hp-disk.c @@ -27,7 +27,6 @@ #include <linux/interrupt.h> #include <linux/input.h> #include <linux/kthread.h> -#include <linux/version.h> #include <linux/leds.h> #include <acpi/acpi_drivers.h> @@ -49,7 +48,7 @@ static struct acpi_hpled adev; static acpi_status hpled_acpi_write(acpi_handle handle, int reg) { - unsigned long ret; /* Not used when writing */ + unsigned long long ret; /* Not used when writing */ union acpi_object in_obj[1]; struct acpi_object_list args = { 1, in_obj }; diff --git a/drivers/md/dm-raid1.c b/drivers/md/dm-raid1.c index 92dcc06832a..9d7b53ed75b 100644 --- a/drivers/md/dm-raid1.c +++ b/drivers/md/dm-raid1.c @@ -656,9 +656,10 @@ static void do_failures(struct mirror_set *ms, struct bio_list *failures) return; if (!ms->log_failure) { - while ((bio = bio_list_pop(failures))) + while ((bio = bio_list_pop(failures))) { ms->in_sync = 0; dm_rh_mark_nosync(ms->rh, bio, bio->bi_size, 0); + } return; } diff --git a/drivers/md/dm-snap.c b/drivers/md/dm-snap.c index b2d9d1ac28a..6c96db26b87 100644 --- a/drivers/md/dm-snap.c +++ b/drivers/md/dm-snap.c @@ -229,19 +229,21 @@ static void __insert_origin(struct origin *o) */ static int register_snapshot(struct dm_snapshot *snap) { - struct origin *o; + struct origin *o, *new_o; struct block_device *bdev = snap->origin->bdev; + new_o = kmalloc(sizeof(*new_o), GFP_KERNEL); + if (!new_o) + return -ENOMEM; + down_write(&_origins_lock); o = __lookup_origin(bdev); - if (!o) { + if (o) + kfree(new_o); + else { /* New origin */ - o = kmalloc(sizeof(*o), GFP_KERNEL); - if (!o) { - up_write(&_origins_lock); - return -ENOMEM; - } + o = new_o; /* Initialise the struct */ INIT_LIST_HEAD(&o->snapshots); @@ -368,6 +370,7 @@ static struct dm_snap_pending_exception *alloc_pending_exception(struct dm_snaps struct dm_snap_pending_exception *pe = mempool_alloc(s->pending_pool, GFP_NOIO); + atomic_inc(&s->pending_exceptions_count); pe->snap = s; return pe; @@ -375,7 +378,11 @@ static struct dm_snap_pending_exception *alloc_pending_exception(struct dm_snaps static void free_pending_exception(struct dm_snap_pending_exception *pe) { - mempool_free(pe, pe->snap->pending_pool); + struct dm_snapshot *s = pe->snap; + + mempool_free(pe, s->pending_pool); + smp_mb__before_atomic_dec(); + atomic_dec(&s->pending_exceptions_count); } static void insert_completed_exception(struct dm_snapshot *s, @@ -600,6 +607,7 @@ static int snapshot_ctr(struct dm_target *ti, unsigned int argc, char **argv) s->valid = 1; s->active = 0; + atomic_set(&s->pending_exceptions_count, 0); init_rwsem(&s->lock); spin_lock_init(&s->pe_lock); s->ti = ti; @@ -726,6 +734,14 @@ static void snapshot_dtr(struct dm_target *ti) /* After this returns there can be no new kcopyd jobs. */ unregister_snapshot(s); + while (atomic_read(&s->pending_exceptions_count)) + yield(); + /* + * Ensure instructions in mempool_destroy aren't reordered + * before atomic_read. + */ + smp_mb(); + #ifdef CONFIG_DM_DEBUG for (i = 0; i < DM_TRACKED_CHUNK_HASH_SIZE; i++) BUG_ON(!hlist_empty(&s->tracked_chunk_hash[i])); diff --git a/drivers/md/dm-snap.h b/drivers/md/dm-snap.h index f07315fe236..99c0106ede2 100644 --- a/drivers/md/dm-snap.h +++ b/drivers/md/dm-snap.h @@ -160,6 +160,8 @@ struct dm_snapshot { mempool_t *pending_pool; + atomic_t pending_exceptions_count; + struct exception_table pending; struct exception_table complete; diff --git a/drivers/md/linear.c b/drivers/md/linear.c index 190147c79e7..3b90c5c924e 100644 --- a/drivers/md/linear.c +++ b/drivers/md/linear.c @@ -148,6 +148,8 @@ static linear_conf_t *linear_conf(mddev_t *mddev, int raid_disks) min_sectors = conf->array_sectors; sector_div(min_sectors, PAGE_SIZE/sizeof(struct dev_info *)); + if (min_sectors == 0) + min_sectors = 1; /* min_sectors is the minimum spacing that will fit the hash * table in one PAGE. This may be much smaller than needed. diff --git a/drivers/md/md.c b/drivers/md/md.c index c1a837ca193..1b1d32694f6 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -222,6 +222,9 @@ static void mddev_put(mddev_t *mddev) list_del(&mddev->all_mddevs); spin_unlock(&all_mddevs_lock); blk_cleanup_queue(mddev->queue); + if (mddev->sysfs_state) + sysfs_put(mddev->sysfs_state); + mddev->sysfs_state = NULL; kobject_put(&mddev->kobj); } else spin_unlock(&all_mddevs_lock); @@ -1459,6 +1462,8 @@ static int bind_rdev_to_array(mdk_rdev_t * rdev, mddev_t * mddev) kobject_del(&rdev->kobj); goto fail; } + rdev->sysfs_state = sysfs_get_dirent(rdev->kobj.sd, "state"); + list_add_rcu(&rdev->same_set, &mddev->disks); bd_claim_by_disk(rdev->bdev, rdev->bdev->bd_holder, mddev->gendisk); return 0; @@ -1488,7 +1493,8 @@ static void unbind_rdev_from_array(mdk_rdev_t * rdev) printk(KERN_INFO "md: unbind<%s>\n", bdevname(rdev->bdev,b)); rdev->mddev = NULL; sysfs_remove_link(&rdev->kobj, "block"); - + sysfs_put(rdev->sysfs_state); + rdev->sysfs_state = NULL; /* We need to delay this, otherwise we can deadlock when * writing to 'remove' to "dev/state". We also need * to delay it due to rcu usage. @@ -1923,8 +1929,8 @@ state_store(mdk_rdev_t *rdev, const char *buf, size_t len) err = 0; } - if (!err) - sysfs_notify(&rdev->kobj, NULL, "state"); + if (!err && rdev->sysfs_state) + sysfs_notify_dirent(rdev->sysfs_state); return err ? err : len; } static struct rdev_sysfs_entry rdev_state = @@ -2019,7 +2025,7 @@ slot_store(mdk_rdev_t *rdev, const char *buf, size_t len) rdev->raid_disk = -1; return err; } else - sysfs_notify(&rdev->kobj, NULL, "state"); + sysfs_notify_dirent(rdev->sysfs_state); sprintf(nm, "rd%d", rdev->raid_disk); if (sysfs_create_link(&rdev->mddev->kobj, &rdev->kobj, nm)) printk(KERN_WARNING @@ -2036,7 +2042,7 @@ slot_store(mdk_rdev_t *rdev, const char *buf, size_t len) clear_bit(Faulty, &rdev->flags); clear_bit(WriteMostly, &rdev->flags); set_bit(In_sync, &rdev->flags); - sysfs_notify(&rdev->kobj, NULL, "state"); + sysfs_notify_dirent(rdev->sysfs_state); } return len; } @@ -2770,7 +2776,7 @@ array_state_store(mddev_t *mddev, const char *buf, size_t len) if (err) return err; else { - sysfs_notify(&mddev->kobj, NULL, "array_state"); + sysfs_notify_dirent(mddev->sysfs_state); return len; } } @@ -3457,6 +3463,11 @@ static struct kobject *md_probe(dev_t dev, int *part, void *data) disk->fops = &md_fops; disk->private_data = mddev; disk->queue = mddev->queue; + /* Allow extended partitions. This makes the + * 'mdp' device redundant, but we can really + * remove it now. + */ + disk->flags |= GENHD_FL_EXT_DEVT; add_disk(disk); mddev->gendisk = disk; error = kobject_init_and_add(&mddev->kobj, &md_ktype, @@ -3465,8 +3476,10 @@ static struct kobject *md_probe(dev_t dev, int *part, void *data) if (error) printk(KERN_WARNING "md: cannot register %s/md - name in use\n", disk->disk_name); - else + else { kobject_uevent(&mddev->kobj, KOBJ_ADD); + mddev->sysfs_state = sysfs_get_dirent(mddev->kobj.sd, "array_state"); + } return NULL; } @@ -3477,7 +3490,7 @@ static void md_safemode_timeout(unsigned long data) if (!atomic_read(&mddev->writes_pending)) { mddev->safemode = 1; if (mddev->external) - set_bit(MD_NOTIFY_ARRAY_STATE, &mddev->flags); + sysfs_notify_dirent(mddev->sysfs_state); } md_wakeup_thread(mddev->thread); } @@ -3578,7 +3591,7 @@ static int do_md_run(mddev_t * mddev) return -EINVAL; } } - sysfs_notify(&rdev->kobj, NULL, "state"); + sysfs_notify_dirent(rdev->sysfs_state); } md_probe(mddev->unit, NULL, NULL); @@ -3740,7 +3753,7 @@ static int do_md_run(mddev_t * mddev) mddev->changed = 1; md_new_event(mddev); - sysfs_notify(&mddev->kobj, NULL, "array_state"); + sysfs_notify_dirent(mddev->sysfs_state); sysfs_notify(&mddev->kobj, NULL, "sync_action"); sysfs_notify(&mddev->kobj, NULL, "degraded"); kobject_uevent(&disk_to_dev(mddev->gendisk)->kobj, KOBJ_CHANGE); @@ -3767,7 +3780,7 @@ static int restart_array(mddev_t *mddev) set_bit(MD_RECOVERY_NEEDED, &mddev->recovery); md_wakeup_thread(mddev->thread); md_wakeup_thread(mddev->sync_thread); - sysfs_notify(&mddev->kobj, NULL, "array_state"); + sysfs_notify_dirent(mddev->sysfs_state); return 0; } @@ -3847,7 +3860,7 @@ static int do_md_stop(mddev_t * mddev, int mode, int is_open) module_put(mddev->pers->owner); mddev->pers = NULL; /* tell userspace to handle 'inactive' */ - sysfs_notify(&mddev->kobj, NULL, "array_state"); + sysfs_notify_dirent(mddev->sysfs_state); set_capacity(disk, 0); mddev->changed = 1; @@ -3927,13 +3940,14 @@ static int do_md_stop(mddev_t * mddev, int mode, int is_open) mddev->degraded = 0; mddev->barriers_work = 0; mddev->safemode = 0; + kobject_uevent(&disk_to_dev(mddev->gendisk)->kobj, KOBJ_CHANGE); } else if (mddev->pers) printk(KERN_INFO "md: %s switched to read-only mode.\n", mdname(mddev)); err = 0; md_new_event(mddev); - sysfs_notify(&mddev->kobj, NULL, "array_state"); + sysfs_notify_dirent(mddev->sysfs_state); out: return err; } @@ -4297,7 +4311,7 @@ static int add_new_disk(mddev_t * mddev, mdu_disk_info_t *info) if (err) export_rdev(rdev); else - sysfs_notify(&rdev->kobj, NULL, "state"); + sysfs_notify_dirent(rdev->sysfs_state); md_update_sb(mddev, 1); if (mddev->degraded) @@ -4938,7 +4952,7 @@ static int md_ioctl(struct block_device *bdev, fmode_t mode, if (_IOC_TYPE(cmd) == MD_MAJOR && mddev->ro && mddev->pers) { if (mddev->ro == 2) { mddev->ro = 0; - sysfs_notify(&mddev->kobj, NULL, "array_state"); + sysfs_notify_dirent(mddev->sysfs_state); set_bit(MD_RECOVERY_NEEDED, &mddev->recovery); md_wakeup_thread(mddev->thread); } else { @@ -5612,7 +5626,7 @@ void md_write_start(mddev_t *mddev, struct bio *bi) spin_unlock_irq(&mddev->write_lock); } if (did_change) - sysfs_notify(&mddev->kobj, NULL, "array_state"); + sysfs_notify_dirent(mddev->sysfs_state); wait_event(mddev->sb_wait, !test_bit(MD_CHANGE_CLEAN, &mddev->flags) && !test_bit(MD_CHANGE_PENDING, &mddev->flags)); @@ -5655,7 +5669,7 @@ int md_allow_write(mddev_t *mddev) mddev->safemode = 1; spin_unlock_irq(&mddev->write_lock); md_update_sb(mddev, 0); - sysfs_notify(&mddev->kobj, NULL, "array_state"); + sysfs_notify_dirent(mddev->sysfs_state); } else spin_unlock_irq(&mddev->write_lock); @@ -6048,9 +6062,6 @@ void md_check_recovery(mddev_t *mddev) if (mddev->bitmap) bitmap_daemon_work(mddev->bitmap); - if (test_and_clear_bit(MD_NOTIFY_ARRAY_STATE, &mddev->flags)) - sysfs_notify(&mddev->kobj, NULL, "array_state"); - if (mddev->ro) return; @@ -6103,7 +6114,7 @@ void md_check_recovery(mddev_t *mddev) mddev->safemode = 0; spin_unlock_irq(&mddev->write_lock); if (did_change) - sysfs_notify(&mddev->kobj, NULL, "array_state"); + sysfs_notify_dirent(mddev->sysfs_state); } if (mddev->flags) @@ -6111,7 +6122,7 @@ void md_check_recovery(mddev_t *mddev) rdev_for_each(rdev, rtmp, mddev) if (test_and_clear_bit(StateChanged, &rdev->flags)) - sysfs_notify(&rdev->kobj, NULL, "state"); + sysfs_notify_dirent(rdev->sysfs_state); if (test_bit(MD_RECOVERY_RUNNING, &mddev->recovery) && @@ -6221,7 +6232,7 @@ void md_check_recovery(mddev_t *mddev) void md_wait_for_blocked_rdev(mdk_rdev_t *rdev, mddev_t *mddev) { - sysfs_notify(&rdev->kobj, NULL, "state"); + sysfs_notify_dirent(rdev->sysfs_state); wait_event_timeout(rdev->blocked_wait, !test_bit(Blocked, &rdev->flags), msecs_to_jiffies(5000)); diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index da5129a24b1..970a96ef9b1 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -1137,7 +1137,7 @@ static int raid10_add_disk(mddev_t *mddev, mdk_rdev_t *rdev) if (!enough(conf)) return -EINVAL; - if (rdev->raid_disk) + if (rdev->raid_disk >= 0) first = last = rdev->raid_disk; if (rdev->saved_raid_disk >= 0 && diff --git a/drivers/message/fusion/mptctl.c b/drivers/message/fusion/mptctl.c index f5233f3d9ef..b89f476cd0a 100644 --- a/drivers/message/fusion/mptctl.c +++ b/drivers/message/fusion/mptctl.c @@ -559,12 +559,6 @@ mptctl_fasync(int fd, struct file *filep, int mode) return ret; } -static int -mptctl_release(struct inode *inode, struct file *filep) -{ - return fasync_helper(-1, filep, 0, &async_queue); -} - /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /* * MPT ioctl handler @@ -2706,7 +2700,6 @@ mptctl_hp_targetinfo(unsigned long arg) static const struct file_operations mptctl_fops = { .owner = THIS_MODULE, .llseek = no_llseek, - .release = mptctl_release, .fasync = mptctl_fasync, .unlocked_ioctl = mptctl_ioctl, #ifdef CONFIG_COMPAT diff --git a/drivers/message/fusion/mptlan.c b/drivers/message/fusion/mptlan.c index a1abf95cf75..603ffd008c7 100644 --- a/drivers/message/fusion/mptlan.c +++ b/drivers/message/fusion/mptlan.c @@ -77,12 +77,6 @@ MODULE_VERSION(my_VERSION); * Fusion MPT LAN private structures */ -struct NAA_Hosed { - u16 NAA; - u8 ieee[FC_ALEN]; - struct NAA_Hosed *next; -}; - struct BufferControl { struct sk_buff *skb; dma_addr_t dma; @@ -159,11 +153,6 @@ static u8 LanCtx = MPT_MAX_PROTOCOL_DRIVERS; static u32 max_buckets_out = 127; static u32 tx_max_out_p = 127 - 16; -#ifdef QLOGIC_NAA_WORKAROUND -static struct NAA_Hosed *mpt_bad_naa = NULL; -DEFINE_RWLOCK(bad_naa_lock); -#endif - /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /** * lan_reply - Handle all data sent from the hardware. @@ -780,30 +769,6 @@ mpt_lan_sdu_send (struct sk_buff *skb, struct net_device *dev) // ctx, skb, skb->data)); mac = skb_mac_header(skb); -#ifdef QLOGIC_NAA_WORKAROUND -{ - struct NAA_Hosed *nh; - - /* Munge the NAA for Tx packets to QLogic boards, which don't follow - RFC 2625. The longer I look at this, the more my opinion of Qlogic - drops. */ - read_lock_irq(&bad_naa_lock); - for (nh = mpt_bad_naa; nh != NULL; nh=nh->next) { - if ((nh->ieee[0] == mac[0]) && - (nh->ieee[1] == mac[1]) && - (nh->ieee[2] == mac[2]) && - (nh->ieee[3] == mac[3]) && - (nh->ieee[4] == mac[4]) && - (nh->ieee[5] == mac[5])) { - cur_naa = nh->NAA; - dlprintk ((KERN_INFO "mptlan/sdu_send: using NAA value " - "= %04x.\n", cur_naa)); - break; - } - } - read_unlock_irq(&bad_naa_lock); -} -#endif pTrans->TransactionDetails[0] = cpu_to_le32((cur_naa << 16) | (mac[0] << 8) | @@ -1572,79 +1537,6 @@ mpt_lan_type_trans(struct sk_buff *skb, struct net_device *dev) fcllc = (struct fcllc *)skb->data; -#ifdef QLOGIC_NAA_WORKAROUND -{ - u16 source_naa = fch->stype, found = 0; - - /* Workaround for QLogic not following RFC 2625 in regards to the NAA - value. */ - - if ((source_naa & 0xF000) == 0) - source_naa = swab16(source_naa); - - if (fcllc->ethertype == htons(ETH_P_ARP)) - dlprintk ((KERN_INFO "mptlan/type_trans: got arp req/rep w/ naa of " - "%04x.\n", source_naa)); - - if ((fcllc->ethertype == htons(ETH_P_ARP)) && - ((source_naa >> 12) != MPT_LAN_NAA_RFC2625)){ - struct NAA_Hosed *nh, *prevnh; - int i; - - dlprintk ((KERN_INFO "mptlan/type_trans: ARP Req/Rep from " - "system with non-RFC 2625 NAA value (%04x).\n", - source_naa)); - - write_lock_irq(&bad_naa_lock); - for (prevnh = nh = mpt_bad_naa; nh != NULL; - prevnh=nh, nh=nh->next) { - if ((nh->ieee[0] == fch->saddr[0]) && - (nh->ieee[1] == fch->saddr[1]) && - (nh->ieee[2] == fch->saddr[2]) && - (nh->ieee[3] == fch->saddr[3]) && - (nh->ieee[4] == fch->saddr[4]) && - (nh->ieee[5] == fch->saddr[5])) { - found = 1; - dlprintk ((KERN_INFO "mptlan/type_trans: ARP Re" - "q/Rep w/ bad NAA from system already" - " in DB.\n")); - break; - } - } - - if ((!found) && (nh == NULL)) { - - nh = kmalloc(sizeof(struct NAA_Hosed), GFP_KERNEL); - dlprintk ((KERN_INFO "mptlan/type_trans: ARP Req/Rep w/" - " bad NAA from system not yet in DB.\n")); - - if (nh != NULL) { - nh->next = NULL; - if (!mpt_bad_naa) - mpt_bad_naa = nh; - if (prevnh) - prevnh->next = nh; - - nh->NAA = source_naa; /* Set the S_NAA value. */ - for (i = 0; i < FC_ALEN; i++) - nh->ieee[i] = fch->saddr[i]; - dlprintk ((KERN_INFO "Got ARP from %02x:%02x:%02x:%02x:" - "%02x:%02x with non-compliant S_NAA value.\n", - fch->saddr[0], fch->saddr[1], fch->saddr[2], - fch->saddr[3], fch->saddr[4],fch->saddr[5])); - } else { - printk (KERN_ERR "mptlan/type_trans: Unable to" - " kmalloc a NAA_Hosed struct.\n"); - } - } else if (!found) { - printk (KERN_ERR "mptlan/type_trans: found not" - " set, but nh isn't null. Evil " - "funkiness abounds.\n"); - } - write_unlock_irq(&bad_naa_lock); - } -} -#endif /* Strip the SNAP header from ARP packets since we don't * pass them through to the 802.2/SNAP layers. diff --git a/drivers/message/i2o/i2o_block.c b/drivers/message/i2o/i2o_block.c index 11a617ab424..84bdc2ee69e 100644 --- a/drivers/message/i2o/i2o_block.c +++ b/drivers/message/i2o/i2o_block.c @@ -567,8 +567,8 @@ static void i2o_block_biosparam(unsigned long capacity, unsigned short *cyls, /** * i2o_block_open - Open the block device - * @inode: inode for block device being opened - * @file: file to open + * @bdev: block device being opened + * @mode: file open mode * * Power up the device, mount and lock the media. This function is called, * if the block device is opened for access. @@ -596,8 +596,8 @@ static int i2o_block_open(struct block_device *bdev, fmode_t mode) /** * i2o_block_release - Release the I2O block device - * @inode: inode for block device being released - * @file: file to close + * @disk: gendisk device being released + * @mode: file open mode * * Unlock and unmount the media, and power down the device. Gets called if * the block device is closed. @@ -643,8 +643,8 @@ static int i2o_block_getgeo(struct block_device *bdev, struct hd_geometry *geo) /** * i2o_block_ioctl - Issue device specific ioctl calls. - * @inode: inode for block device ioctl - * @file: file for ioctl + * @bdev: block device being opened + * @mode: file open mode * @cmd: ioctl command * @arg: arg * diff --git a/drivers/message/i2o/i2o_config.c b/drivers/message/i2o/i2o_config.c index a3fabdbe6ca..f3384c32b9a 100644 --- a/drivers/message/i2o/i2o_config.c +++ b/drivers/message/i2o/i2o_config.c @@ -1097,28 +1097,17 @@ static int cfg_fasync(int fd, struct file *fp, int on) static int cfg_release(struct inode *inode, struct file *file) { ulong id = (ulong) file->private_data; - struct i2o_cfg_info *p1, *p2; + struct i2o_cfg_info *p, **q; unsigned long flags; lock_kernel(); - p1 = p2 = NULL; - spin_lock_irqsave(&i2o_config_lock, flags); - for (p1 = open_files; p1;) { - if (p1->q_id == id) { - - if (p1->fasync) - cfg_fasync(-1, file, 0); - if (p2) - p2->next = p1->next; - else - open_files = p1->next; - - kfree(p1); + for (q = &open_files; (p = *q) != NULL; q = &p->next) { + if (p->q_id == id) { + *q = p->next; + kfree(p); break; } - p2 = p1; - p1 = p1->next; } spin_unlock_irqrestore(&i2o_config_lock, flags); unlock_kernel(); diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 5a79d2d4cda..257277394f8 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -81,7 +81,7 @@ config MFD_TMIO config MFD_T7L66XB bool "Support Toshiba T7L66XB" - depends on ARM + depends on ARM && HAVE_CLK select MFD_CORE select MFD_TMIO help @@ -89,7 +89,7 @@ config MFD_T7L66XB config MFD_TC6387XB bool "Support Toshiba TC6387XB" - depends on ARM + depends on ARM && HAVE_CLK select MFD_CORE select MFD_TMIO help @@ -103,8 +103,20 @@ config MFD_TC6393XB help Support for Toshiba Mobile IO Controller TC6393XB +config PMIC_DA903X + bool "Dialog Semiconductor DA9030/DA9034 PMIC Support" + depends on I2C=y + help + Say yes here to support for Dialog Semiconductor DA9030 (a.k.a + ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC + usually found on PXA processors-based platforms. This includes + the I2C driver and the core APIs _only_, you have to select + individual components like LCD backlight, voltage regulators, + LEDs and battery-charger under the corresponding menus. + config MFD_WM8400 tristate "Support Wolfson Microelectronics WM8400" + depends on I2C help Support for the Wolfson Microelecronics WM8400 PMIC and audio CODEC. This driver adds provides common support for accessing diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 0acefe8aff8..9a5ad8af911 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -30,3 +30,5 @@ ifeq ($(CONFIG_SA1100_ASSABET),y) obj-$(CONFIG_MCP_UCB1200) += ucb1x00-assabet.o endif obj-$(CONFIG_UCB1400_CORE) += ucb1400_core.o + +obj-$(CONFIG_PMIC_DA903X) += da903x.o
\ No newline at end of file diff --git a/drivers/misc/hdpuftrs/hdpu_nexus.c b/drivers/misc/hdpuftrs/hdpu_nexus.c index 08e26beefe6..ce39fa54949 100644 --- a/drivers/misc/hdpuftrs/hdpu_nexus.c +++ b/drivers/misc/hdpuftrs/hdpu_nexus.c @@ -113,7 +113,6 @@ static int hdpu_nexus_probe(struct platform_device *pdev) if (!hdpu_chassis_id) printk(KERN_WARNING "sky_nexus: " "Unable to create proc dir entry: sky_chassis_id\n"); - } return 0; } diff --git a/drivers/misc/panasonic-laptop.c b/drivers/misc/panasonic-laptop.c index a2cb598d8ab..4a1bc64485d 100644 --- a/drivers/misc/panasonic-laptop.c +++ b/drivers/misc/panasonic-laptop.c @@ -116,7 +116,6 @@ * */ -#include <linux/version.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/init.h> diff --git a/drivers/misc/sgi-xp/Makefile b/drivers/misc/sgi-xp/Makefile index 35ce2857807..4fc40d8e1bc 100644 --- a/drivers/misc/sgi-xp/Makefile +++ b/drivers/misc/sgi-xp/Makefile @@ -5,14 +5,14 @@ obj-$(CONFIG_SGI_XP) += xp.o xp-y := xp_main.o xp-$(CONFIG_IA64_SGI_SN2) += xp_sn2.o xp_nofault.o -xp-$(CONFIG_IA64_GENERIC) += xp_sn2.o xp_nofault.o xp_uv.o +xp-$(CONFIG_IA64_GENERIC) += xp_sn2.o xp_nofault.o xp-$(CONFIG_IA64_SGI_UV) += xp_uv.o xp-$(CONFIG_X86_64) += xp_uv.o obj-$(CONFIG_SGI_XP) += xpc.o xpc-y := xpc_main.o xpc_channel.o xpc_partition.o xpc-$(CONFIG_IA64_SGI_SN2) += xpc_sn2.o -xpc-$(CONFIG_IA64_GENERIC) += xpc_sn2.o xpc_uv.o +xpc-$(CONFIG_IA64_GENERIC) += xpc_sn2.o xpc-$(CONFIG_IA64_SGI_UV) += xpc_uv.o xpc-$(CONFIG_X86_64) += xpc_uv.o diff --git a/drivers/misc/sgi-xp/xp.h b/drivers/misc/sgi-xp/xp.h index 859a5281c61..ed1722e5004 100644 --- a/drivers/misc/sgi-xp/xp.h +++ b/drivers/misc/sgi-xp/xp.h @@ -19,7 +19,11 @@ #include <asm/system.h> #include <asm/sn/arch.h> /* defines is_shub1() and is_shub2() */ #define is_shub() ia64_platform_is("sn2") +#ifdef CONFIG_IA64_SGI_UV #define is_uv() ia64_platform_is("uv") +#else +#define is_uv() 0 +#endif #endif #ifdef CONFIG_X86_64 #include <asm/genapic.h> diff --git a/drivers/misc/sgi-xp/xpc_main.c b/drivers/misc/sgi-xp/xpc_main.c index 46325fc8481..e8d5cfbd32c 100644 --- a/drivers/misc/sgi-xp/xpc_main.c +++ b/drivers/misc/sgi-xp/xpc_main.c @@ -1104,7 +1104,7 @@ xpc_do_exit(enum xp_retval reason) if (is_shub()) xpc_exit_sn2(); - else + else if (is_uv()) xpc_exit_uv(); } @@ -1363,7 +1363,7 @@ out_2: out_1: if (is_shub()) xpc_exit_sn2(); - else + else if (is_uv()) xpc_exit_uv(); return ret; } diff --git a/drivers/misc/sony-laptop.c b/drivers/misc/sony-laptop.c index 5a97d3a9d74..06f07e19dc7 100644 --- a/drivers/misc/sony-laptop.c +++ b/drivers/misc/sony-laptop.c @@ -1920,7 +1920,6 @@ static int sonypi_misc_fasync(int fd, struct file *filp, int on) static int sonypi_misc_release(struct inode *inode, struct file *file) { - sonypi_misc_fasync(-1, file, 0); atomic_dec(&sonypi_compat.open_count); return 0; } @@ -2315,8 +2314,10 @@ end: */ static int sony_pic_disable(struct acpi_device *device) { - if (ACPI_FAILURE(acpi_evaluate_object(device->handle, - "_DIS", NULL, NULL))) + acpi_status ret = acpi_evaluate_object(device->handle, "_DIS", NULL, + NULL); + + if (ACPI_FAILURE(ret) && ret != AE_NOT_FOUND) return -ENXIO; dprintk("Device disabled\n"); diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 696cf3647ce..2fadf323c69 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -391,6 +391,7 @@ static irqreturn_t mmci_irq(int irq, void *dev_id) static void mmci_request(struct mmc_host *mmc, struct mmc_request *mrq) { struct mmci_host *host = mmc_priv(mmc); + unsigned long flags; WARN_ON(host->mrq != NULL); @@ -402,7 +403,7 @@ static void mmci_request(struct mmc_host *mmc, struct mmc_request *mrq) return; } - spin_lock_irq(&host->lock); + spin_lock_irqsave(&host->lock, flags); host->mrq = mrq; @@ -411,7 +412,7 @@ static void mmci_request(struct mmc_host *mmc, struct mmc_request *mrq) mmci_start_command(host, mrq->cmd, 0); - spin_unlock_irq(&host->lock); + spin_unlock_irqrestore(&host->lock, flags); } static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c index 3e6f5d8609e..d74ec46aa03 100644 --- a/drivers/mtd/chips/cfi_cmdset_0002.c +++ b/drivers/mtd/chips/cfi_cmdset_0002.c @@ -406,19 +406,6 @@ struct mtd_info *cfi_cmdset_0002(struct map_info *map, int primary) /* Set the default CFI lock/unlock addresses */ cfi->addr_unlock1 = 0x555; cfi->addr_unlock2 = 0x2aa; - /* Modify the unlock address if we are in compatibility mode */ - if ( /* x16 in x8 mode */ - ((cfi->device_type == CFI_DEVICETYPE_X8) && - (cfi->cfiq->InterfaceDesc == - CFI_INTERFACE_X8_BY_X16_ASYNC)) || - /* x32 in x16 mode */ - ((cfi->device_type == CFI_DEVICETYPE_X16) && - (cfi->cfiq->InterfaceDesc == - CFI_INTERFACE_X16_BY_X32_ASYNC))) - { - cfi->addr_unlock1 = 0xaaa; - cfi->addr_unlock2 = 0x555; - } } /* CFI mode */ else if (cfi->cfi_mode == CFI_MODE_JEDEC) { diff --git a/drivers/mtd/chips/jedec_probe.c b/drivers/mtd/chips/jedec_probe.c index f84ab618214..2f3f2f719ba 100644 --- a/drivers/mtd/chips/jedec_probe.c +++ b/drivers/mtd/chips/jedec_probe.c @@ -1808,9 +1808,7 @@ static inline u32 jedec_read_mfr(struct map_info *map, uint32_t base, * several first banks can contain 0x7f instead of actual ID */ do { - uint32_t ofs = cfi_build_cmd_addr(0 + (bank << 8), - cfi_interleave(cfi), - cfi->device_type); + uint32_t ofs = cfi_build_cmd_addr(0 + (bank << 8), map, cfi); mask = (1 << (cfi->device_type * 8)) - 1; result = map_read(map, base + ofs); bank++; @@ -1824,7 +1822,7 @@ static inline u32 jedec_read_id(struct map_info *map, uint32_t base, { map_word result; unsigned long mask; - u32 ofs = cfi_build_cmd_addr(1, cfi_interleave(cfi), cfi->device_type); + u32 ofs = cfi_build_cmd_addr(1, map, cfi); mask = (1 << (cfi->device_type * 8)) -1; result = map_read(map, base + ofs); return result.x[0] & mask; @@ -2067,8 +2065,8 @@ static int jedec_probe_chip(struct map_info *map, __u32 base, } /* Ensure the unlock addresses we try stay inside the map */ - probe_offset1 = cfi_build_cmd_addr(cfi->addr_unlock1, cfi_interleave(cfi), cfi->device_type); - probe_offset2 = cfi_build_cmd_addr(cfi->addr_unlock2, cfi_interleave(cfi), cfi->device_type); + probe_offset1 = cfi_build_cmd_addr(cfi->addr_unlock1, map, cfi); + probe_offset2 = cfi_build_cmd_addr(cfi->addr_unlock2, map, cfi); if ( ((base + probe_offset1 + map_bankwidth(map)) >= map->size) || ((base + probe_offset2 + map_bankwidth(map)) >= map->size)) goto retry; diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c index 8387e05daae..e39b21d3e16 100644 --- a/drivers/mtd/onenand/omap2.c +++ b/drivers/mtd/onenand/omap2.c @@ -38,7 +38,6 @@ #include <asm/arch/gpmc.h> #include <asm/arch/onenand.h> #include <asm/arch/gpio.h> -#include <asm/arch/gpmc.h> #include <asm/arch/pm.h> #include <linux/dma-mapping.h> diff --git a/drivers/net/3c509.c b/drivers/net/3c509.c index 3a7bc524af3..c7a4f3bcc2b 100644 --- a/drivers/net/3c509.c +++ b/drivers/net/3c509.c @@ -94,7 +94,7 @@ #include <asm/io.h> #include <asm/irq.h> -static char version[] __initdata = DRV_NAME ".c:" DRV_VERSION " " DRV_RELDATE " becker@scyld.com\n"; +static char version[] __devinitdata = DRV_NAME ".c:" DRV_VERSION " " DRV_RELDATE " becker@scyld.com\n"; #ifdef EL3_DEBUG static int el3_debug = EL3_DEBUG; @@ -186,7 +186,7 @@ static int max_interrupt_work = 10; static int nopnp; #endif -static int __init el3_common_init(struct net_device *dev); +static int __devinit el3_common_init(struct net_device *dev); static void el3_common_remove(struct net_device *dev); static ushort id_read_eeprom(int index); static ushort read_eeprom(int ioaddr, int index); @@ -537,7 +537,7 @@ static struct mca_driver el3_mca_driver = { static int mca_registered; #endif /* CONFIG_MCA */ -static int __init el3_common_init(struct net_device *dev) +static int __devinit el3_common_init(struct net_device *dev) { struct el3_private *lp = netdev_priv(dev); int err; diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index f749b40f954..11f143f4adf 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -2010,9 +2010,13 @@ config IGB_LRO If in doubt, say N. config IGB_DCA - bool "Enable DCA" + bool "Direct Cache Access (DCA) Support" default y depends on IGB && DCA && !(IGB=y && DCA=m) + ---help--- + Say Y here if you want to use Direct Cache Access (DCA) in the + driver. DCA is a method for warming the CPU cache before data + is used, with the intent of lessening the impact of cache misses. source "drivers/net/ixp2000/Kconfig" @@ -2437,9 +2441,13 @@ config IXGBE will be called ixgbe. config IXGBE_DCA - bool + bool "Direct Cache Access (DCA) Support" default y depends on IXGBE && DCA && !(IXGBE=y && DCA=m) + ---help--- + Say Y here if you want to use Direct Cache Access (DCA) in the + driver. DCA is a method for warming the CPU cache before data + is used, with the intent of lessening the impact of cache misses. config IXGB tristate "Intel(R) PRO/10GbE support" @@ -2489,9 +2497,13 @@ config MYRI10GE will be called myri10ge. config MYRI10GE_DCA - bool + bool "Direct Cache Access (DCA) Support" default y depends on MYRI10GE && DCA && !(MYRI10GE=y && DCA=m) + ---help--- + Say Y here if you want to use Direct Cache Access (DCA) in the + driver. DCA is a method for warming the CPU cache before data + is used, with the intent of lessening the impact of cache misses. config NETXEN_NIC tristate "NetXen Multi port (1/10) Gigabit Ethernet NIC" diff --git a/drivers/net/amd8111e.c b/drivers/net/amd8111e.c index c54967f7942..07a6697e363 100644 --- a/drivers/net/amd8111e.c +++ b/drivers/net/amd8111e.c @@ -644,10 +644,6 @@ This function frees the transmiter and receiver descriptor rings. */ static void amd8111e_free_ring(struct amd8111e_priv* lp) { - - /* Free transmit and receive skbs */ - amd8111e_free_skbs(lp->amd8111e_net_dev); - /* Free transmit and receive descriptor rings */ if(lp->rx_ring){ pci_free_consistent(lp->pci_dev, @@ -833,12 +829,14 @@ static int amd8111e_rx_poll(struct napi_struct *napi, int budget) } while(intr0 & RINT0); - /* Receive descriptor is empty now */ - spin_lock_irqsave(&lp->lock, flags); - __netif_rx_complete(dev, napi); - writel(VAL0|RINTEN0, mmio + INTEN0); - writel(VAL2 | RDMD0, mmio + CMD0); - spin_unlock_irqrestore(&lp->lock, flags); + if (rx_pkt_limit > 0) { + /* Receive descriptor is empty now */ + spin_lock_irqsave(&lp->lock, flags); + __netif_rx_complete(dev, napi); + writel(VAL0|RINTEN0, mmio + INTEN0); + writel(VAL2 | RDMD0, mmio + CMD0); + spin_unlock_irqrestore(&lp->lock, flags); + } rx_not_empty: return num_rx_pkt; @@ -1231,7 +1229,9 @@ static int amd8111e_close(struct net_device * dev) amd8111e_disable_interrupt(lp); amd8111e_stop_chip(lp); - amd8111e_free_ring(lp); + + /* Free transmit and receive skbs */ + amd8111e_free_skbs(lp->amd8111e_net_dev); netif_carrier_off(lp->amd8111e_net_dev); @@ -1241,6 +1241,7 @@ static int amd8111e_close(struct net_device * dev) spin_unlock_irq(&lp->lock); free_irq(dev->irq, dev); + amd8111e_free_ring(lp); /* Update the statistics before closing */ amd8111e_get_stats(dev); diff --git a/drivers/net/arm/at91_ether.c b/drivers/net/arm/at91_ether.c index 0fa53464efb..6f431a887e7 100644 --- a/drivers/net/arm/at91_ether.c +++ b/drivers/net/arm/at91_ether.c @@ -1080,7 +1080,8 @@ static int __init at91ether_setup(unsigned long phy_type, unsigned short phy_add init_timer(&lp->check_timer); lp->check_timer.data = (unsigned long)dev; lp->check_timer.function = at91ether_check_link; - } + } else if (lp->board_data.phy_irq_pin >= 32) + gpio_request(lp->board_data.phy_irq_pin, "ethernet_phy"); /* Display ethernet banner */ printk(KERN_INFO "%s: AT91 ethernet at 0x%08x int=%d %s%s (%s)\n", @@ -1167,6 +1168,9 @@ static int __devexit at91ether_remove(struct platform_device *pdev) struct net_device *dev = platform_get_drvdata(pdev); struct at91_private *lp = netdev_priv(dev); + if (lp->board_data.phy_irq_pin >= 32) + gpio_free(lp->board_data.phy_irq_pin); + unregister_netdev(dev); free_irq(dev->irq, dev); dma_free_coherent(NULL, sizeof(struct recv_desc_bufs), lp->dlist, (dma_addr_t)lp->dlist_phys); diff --git a/drivers/net/atl1e/atl1e.h b/drivers/net/atl1e/atl1e.h index b645fa0f3f6..c49550d507a 100644 --- a/drivers/net/atl1e/atl1e.h +++ b/drivers/net/atl1e/atl1e.h @@ -46,7 +46,6 @@ #include <linux/vmalloc.h> #include <linux/pagemap.h> #include <linux/tcp.h> -#include <linux/mii.h> #include <linux/ethtool.h> #include <linux/if_vlan.h> #include <linux/workqueue.h> diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c index 3cf59a7f5a1..246d92b4263 100644 --- a/drivers/net/atlx/atl1.c +++ b/drivers/net/atlx/atl1.c @@ -2310,7 +2310,8 @@ static void atl1_tx_queue(struct atl1_adapter *adapter, u16 count, if (tpd != ptpd) memcpy(tpd, ptpd, sizeof(struct tx_packet_desc)); tpd->buffer_addr = cpu_to_le64(buffer_info->dma); - tpd->word2 = (cpu_to_le16(buffer_info->length) & + tpd->word2 &= ~(TPD_BUFLEN_MASK << TPD_BUFLEN_SHIFT); + tpd->word2 |= (cpu_to_le16(buffer_info->length) & TPD_BUFLEN_MASK) << TPD_BUFLEN_SHIFT; /* @@ -2409,8 +2410,8 @@ static int atl1_xmit_frame(struct sk_buff *skb, struct net_device *netdev) vlan_tag = (vlan_tag << 4) | (vlan_tag >> 13) | ((vlan_tag >> 9) & 0x8); ptpd->word3 |= 1 << TPD_INS_VL_TAG_SHIFT; - ptpd->word3 |= (vlan_tag & TPD_VL_TAGGED_MASK) << - TPD_VL_TAGGED_SHIFT; + ptpd->word2 |= (vlan_tag & TPD_VLANTAG_MASK) << + TPD_VLANTAG_SHIFT; } tso = atl1_tso(adapter, skb, ptpd); diff --git a/drivers/net/atlx/atl1.h b/drivers/net/atlx/atl1.h index a5015b14a42..ffa73fc8d95 100644 --- a/drivers/net/atlx/atl1.h +++ b/drivers/net/atlx/atl1.h @@ -504,7 +504,7 @@ struct rx_free_desc { #define TPD_PKTNT_MASK 0x0001 #define TPD_PKTINT_SHIFT 15 #define TPD_VLANTAG_MASK 0xFFFF -#define TPD_VLAN_SHIFT 16 +#define TPD_VLANTAG_SHIFT 16 /* tpd word 3 bits 0:13 */ #define TPD_EOP_MASK 0x0001 diff --git a/drivers/net/bnx2x_init.h b/drivers/net/bnx2x_init.h index 130927cfc75..a6c0b3abba2 100644 --- a/drivers/net/bnx2x_init.h +++ b/drivers/net/bnx2x_init.h @@ -564,14 +564,15 @@ static const struct arb_line write_arb_addr[NUM_WR_Q-1] = { static void bnx2x_init_pxp(struct bnx2x *bp) { + u16 devctl; int r_order, w_order; u32 val, i; pci_read_config_word(bp->pdev, - bp->pcie_cap + PCI_EXP_DEVCTL, (u16 *)&val); - DP(NETIF_MSG_HW, "read 0x%x from devctl\n", (u16)val); - w_order = ((val & PCI_EXP_DEVCTL_PAYLOAD) >> 5); - r_order = ((val & PCI_EXP_DEVCTL_READRQ) >> 12); + bp->pcie_cap + PCI_EXP_DEVCTL, &devctl); + DP(NETIF_MSG_HW, "read 0x%x from devctl\n", devctl); + w_order = ((devctl & PCI_EXP_DEVCTL_PAYLOAD) >> 5); + r_order = ((devctl & PCI_EXP_DEVCTL_READRQ) >> 12); if (r_order > MAX_RD_ORD) { DP(NETIF_MSG_HW, "read order of %d order adjusted to %d\n", diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c index fce745148ff..600210d7eff 100644 --- a/drivers/net/bnx2x_main.c +++ b/drivers/net/bnx2x_main.c @@ -59,8 +59,8 @@ #include "bnx2x.h" #include "bnx2x_init.h" -#define DRV_MODULE_VERSION "1.45.22" -#define DRV_MODULE_RELDATE "2008/09/09" +#define DRV_MODULE_VERSION "1.45.23" +#define DRV_MODULE_RELDATE "2008/11/03" #define BNX2X_BC_VER 0x040200 /* Time in jiffies before concluding the transmitter is hung */ @@ -6481,6 +6481,7 @@ load_int_disable: bnx2x_free_irq(bp); load_error: bnx2x_free_mem(bp); + bp->port.pmf = 0; /* TBD we really need to reset the chip if we want to recover from this */ @@ -6791,6 +6792,7 @@ unload_error: /* Report UNLOAD_DONE to MCP */ if (!BP_NOMCP(bp)) bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE); + bp->port.pmf = 0; /* Free SKBs, SGEs, TPA pool and driver internals */ bnx2x_free_skbs(bp); @@ -10204,8 +10206,6 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev, return -ENOMEM; } - netif_carrier_off(dev); - bp = netdev_priv(dev); bp->msglevel = debug; @@ -10229,6 +10229,8 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev, goto init_one_exit; } + netif_carrier_off(dev); + bp->common.name = board_info[ent->driver_data].name; printk(KERN_INFO "%s: %s (%c%d) PCI-E x%d %s found at mem %lx," " IRQ %d, ", dev->name, bp->common.name, diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c index ade5f3f6693..87437c78847 100644 --- a/drivers/net/bonding/bond_alb.c +++ b/drivers/net/bonding/bond_alb.c @@ -169,11 +169,14 @@ static void tlb_clear_slave(struct bonding *bond, struct slave *slave, int save_ /* clear slave from tx_hashtbl */ tx_hash_table = BOND_ALB_INFO(bond).tx_hashtbl; - index = SLAVE_TLB_INFO(slave).head; - while (index != TLB_NULL_INDEX) { - u32 next_index = tx_hash_table[index].next; - tlb_init_table_entry(&tx_hash_table[index], save_load); - index = next_index; + /* skip this if we've already freed the tx hash table */ + if (tx_hash_table) { + index = SLAVE_TLB_INFO(slave).head; + while (index != TLB_NULL_INDEX) { + u32 next_index = tx_hash_table[index].next; + tlb_init_table_entry(&tx_hash_table[index], save_load); + index = next_index; + } } tlb_init_slave(slave); diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 832739f38db..a3efba59eee 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -1979,6 +1979,20 @@ void bond_destroy(struct bonding *bond) unregister_netdevice(bond->dev); } +static void bond_destructor(struct net_device *bond_dev) +{ + struct bonding *bond = bond_dev->priv; + + if (bond->wq) + destroy_workqueue(bond->wq); + + netif_addr_lock_bh(bond_dev); + bond_mc_list_destroy(bond); + netif_addr_unlock_bh(bond_dev); + + free_netdev(bond_dev); +} + /* * First release a slave and than destroy the bond if no more slaves iare left. * Must be under rtnl_lock when this function is called. @@ -2376,6 +2390,9 @@ static void bond_miimon_commit(struct bonding *bond) continue; case BOND_LINK_DOWN: + if (slave->link_failure_count < UINT_MAX) + slave->link_failure_count++; + slave->link = BOND_LINK_DOWN; if (bond->params.mode == BOND_MODE_ACTIVEBACKUP || @@ -4550,7 +4567,7 @@ static int bond_init(struct net_device *bond_dev, struct bond_params *params) bond_set_mode_ops(bond, bond->params.mode); - bond_dev->destructor = free_netdev; + bond_dev->destructor = bond_destructor; /* Initialize the device options */ bond_dev->tx_queue_len = 0; @@ -4589,20 +4606,6 @@ static int bond_init(struct net_device *bond_dev, struct bond_params *params) return 0; } -/* De-initialize device specific data. - * Caller must hold rtnl_lock. - */ -static void bond_deinit(struct net_device *bond_dev) -{ - struct bonding *bond = bond_dev->priv; - - list_del(&bond->bond_list); - -#ifdef CONFIG_PROC_FS - bond_remove_proc_entry(bond); -#endif -} - static void bond_work_cancel_all(struct bonding *bond) { write_lock_bh(&bond->lock); @@ -4624,6 +4627,22 @@ static void bond_work_cancel_all(struct bonding *bond) cancel_delayed_work(&bond->ad_work); } +/* De-initialize device specific data. + * Caller must hold rtnl_lock. + */ +static void bond_deinit(struct net_device *bond_dev) +{ + struct bonding *bond = bond_dev->priv; + + list_del(&bond->bond_list); + + bond_work_cancel_all(bond); + +#ifdef CONFIG_PROC_FS + bond_remove_proc_entry(bond); +#endif +} + /* Unregister and free all bond devices. * Caller must hold rtnl_lock. */ @@ -4635,9 +4654,6 @@ static void bond_free_all(void) struct net_device *bond_dev = bond->dev; bond_work_cancel_all(bond); - netif_addr_lock_bh(bond_dev); - bond_mc_list_destroy(bond); - netif_addr_unlock_bh(bond_dev); /* Release the bonded slaves */ bond_release_all(bond_dev); bond_destroy(bond); diff --git a/drivers/net/cris/eth_v10.c b/drivers/net/cris/eth_v10.c index 65d0a910329..7e8a63106bd 100644 --- a/drivers/net/cris/eth_v10.c +++ b/drivers/net/cris/eth_v10.c @@ -32,14 +32,14 @@ #include <linux/skbuff.h> #include <linux/ethtool.h> -#include <asm/arch/svinto.h>/* DMA and register descriptions */ +#include <arch/svinto.h>/* DMA and register descriptions */ #include <asm/io.h> /* CRIS_LED_* I/O functions */ #include <asm/irq.h> #include <asm/dma.h> #include <asm/system.h> #include <asm/ethernet.h> #include <asm/cache.h> -#include <asm/arch/io_interface_mux.h> +#include <arch/io_interface_mux.h> //#define ETHDEBUG #define D(x) diff --git a/drivers/net/ehea/ehea.h b/drivers/net/ehea/ehea.h index 82dd1a891ce..002d918fb4c 100644 --- a/drivers/net/ehea/ehea.h +++ b/drivers/net/ehea/ehea.h @@ -40,7 +40,7 @@ #include <asm/io.h> #define DRV_NAME "ehea" -#define DRV_VERSION "EHEA_0094" +#define DRV_VERSION "EHEA_0095" /* eHEA capability flags */ #define DLPAR_PORT_ADD_REM 1 diff --git a/drivers/net/ehea/ehea_qmr.c b/drivers/net/ehea/ehea_qmr.c index 9b61dc9865d..9d006878f04 100644 --- a/drivers/net/ehea/ehea_qmr.c +++ b/drivers/net/ehea/ehea_qmr.c @@ -632,10 +632,13 @@ static void ehea_rebuild_busmap(void) } } -static int ehea_update_busmap(unsigned long pfn, unsigned long pgnum, int add) +static int ehea_update_busmap(unsigned long pfn, unsigned long nr_pages, int add) { unsigned long i, start_section, end_section; + if (!nr_pages) + return 0; + if (!ehea_bmap) { ehea_bmap = kzalloc(sizeof(struct ehea_bmap), GFP_KERNEL); if (!ehea_bmap) @@ -643,7 +646,7 @@ static int ehea_update_busmap(unsigned long pfn, unsigned long pgnum, int add) } start_section = (pfn * PAGE_SIZE) / EHEA_SECTSIZE; - end_section = start_section + ((pgnum * PAGE_SIZE) / EHEA_SECTSIZE); + end_section = start_section + ((nr_pages * PAGE_SIZE) / EHEA_SECTSIZE); /* Mark entries as valid or invalid only; address is assigned later */ for (i = start_section; i < end_section; i++) { u64 flag; @@ -692,10 +695,54 @@ int ehea_rem_sect_bmap(unsigned long pfn, unsigned long nr_pages) return ret; } -static int ehea_create_busmap_callback(unsigned long pfn, - unsigned long nr_pages, void *arg) +static int ehea_is_hugepage(unsigned long pfn) +{ + int page_order; + + if (pfn & EHEA_HUGEPAGE_PFN_MASK) + return 0; + + page_order = compound_order(pfn_to_page(pfn)); + if (page_order + PAGE_SHIFT != EHEA_HUGEPAGESHIFT) + return 0; + + return 1; +} + +static int ehea_create_busmap_callback(unsigned long initial_pfn, + unsigned long total_nr_pages, void *arg) { - return ehea_update_busmap(pfn, nr_pages, EHEA_BUSMAP_ADD_SECT); + int ret; + unsigned long pfn, start_pfn, end_pfn, nr_pages; + + if ((total_nr_pages * PAGE_SIZE) < EHEA_HUGEPAGE_SIZE) + return ehea_update_busmap(initial_pfn, total_nr_pages, + EHEA_BUSMAP_ADD_SECT); + + /* Given chunk is >= 16GB -> check for hugepages */ + start_pfn = initial_pfn; + end_pfn = initial_pfn + total_nr_pages; + pfn = start_pfn; + + while (pfn < end_pfn) { + if (ehea_is_hugepage(pfn)) { + /* Add mem found in front of the hugepage */ + nr_pages = pfn - start_pfn; + ret = ehea_update_busmap(start_pfn, nr_pages, + EHEA_BUSMAP_ADD_SECT); + if (ret) + return ret; + + /* Skip the hugepage */ + pfn += (EHEA_HUGEPAGE_SIZE / PAGE_SIZE); + start_pfn = pfn; + } else + pfn += (EHEA_SECTSIZE / PAGE_SIZE); + } + + /* Add mem found behind the hugepage(s) */ + nr_pages = pfn - start_pfn; + return ehea_update_busmap(start_pfn, nr_pages, EHEA_BUSMAP_ADD_SECT); } int ehea_create_busmap(void) diff --git a/drivers/net/ehea/ehea_qmr.h b/drivers/net/ehea/ehea_qmr.h index 1e58dc06b7d..0817c1e74a1 100644 --- a/drivers/net/ehea/ehea_qmr.h +++ b/drivers/net/ehea/ehea_qmr.h @@ -40,6 +40,9 @@ #define EHEA_PAGESIZE (1UL << EHEA_PAGESHIFT) #define EHEA_SECTSIZE (1UL << 24) #define EHEA_PAGES_PER_SECTION (EHEA_SECTSIZE >> EHEA_PAGESHIFT) +#define EHEA_HUGEPAGESHIFT 34 +#define EHEA_HUGEPAGE_SIZE (1UL << EHEA_HUGEPAGESHIFT) +#define EHEA_HUGEPAGE_PFN_MASK ((EHEA_HUGEPAGE_SIZE - 1) >> PAGE_SHIFT) #if ((1UL << SECTION_SIZE_BITS) < EHEA_SECTSIZE) #error eHEA module cannot work if kernel sectionsize < ehea sectionsize diff --git a/drivers/net/fs_enet/fs_enet-main.c b/drivers/net/fs_enet/fs_enet-main.c index cb51c1fb033..a6f49d02578 100644 --- a/drivers/net/fs_enet/fs_enet-main.c +++ b/drivers/net/fs_enet/fs_enet-main.c @@ -1099,7 +1099,9 @@ static int __devinit fs_enet_probe(struct of_device *ofdev, ndev->stop = fs_enet_close; ndev->get_stats = fs_enet_get_stats; ndev->set_multicast_list = fs_set_multicast_list; - +#ifdef CONFIG_NET_POLL_CONTROLLER + ndev->poll_controller = fs_enet_netpoll; +#endif if (fpi->use_napi) netif_napi_add(ndev, &fep->napi, fs_enet_rx_napi, fpi->napi_weight); @@ -1209,7 +1211,7 @@ static void __exit fs_cleanup(void) static void fs_enet_netpoll(struct net_device *dev) { disable_irq(dev->irq); - fs_enet_interrupt(dev->irq, dev, NULL); + fs_enet_interrupt(dev->irq, dev); enable_irq(dev->irq); } #endif diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c index 64b201134fd..83a5cb6aa23 100644 --- a/drivers/net/gianfar.c +++ b/drivers/net/gianfar.c @@ -586,6 +586,18 @@ static void gfar_configure_serdes(struct net_device *dev) struct gfar_mii __iomem *regs = (void __iomem *)&priv->regs->gfar_mii_regs; int tbipa = gfar_read(&priv->regs->tbipa); + struct mii_bus *bus = gfar_get_miibus(priv); + + if (bus) + mutex_lock(&bus->mdio_lock); + + /* If the link is already up, we must already be ok, and don't need to + * configure and reset the TBI<->SerDes link. Maybe U-Boot configured + * everything for us? Resetting it takes the link down and requires + * several seconds for it to come back. + */ + if (gfar_local_mdio_read(regs, tbipa, MII_BMSR) & BMSR_LSTATUS) + goto done; /* Single clk mode, mii mode off(for serdes communication) */ gfar_local_mdio_write(regs, tbipa, MII_TBICON, TBICON_CLK_SELECT); @@ -596,6 +608,10 @@ static void gfar_configure_serdes(struct net_device *dev) gfar_local_mdio_write(regs, tbipa, MII_BMCR, BMCR_ANENABLE | BMCR_ANRESTART | BMCR_FULLDPLX | BMCR_SPEED1000); + + done: + if (bus) + mutex_unlock(&bus->mdio_lock); } static void init_registers(struct net_device *dev) diff --git a/drivers/net/gianfar_mii.c b/drivers/net/gianfar_mii.c index bf73eea9801..0e2595d2493 100644 --- a/drivers/net/gianfar_mii.c +++ b/drivers/net/gianfar_mii.c @@ -269,6 +269,27 @@ static struct device_driver gianfar_mdio_driver = { .remove = gfar_mdio_remove, }; +static int match_mdio_bus(struct device *dev, void *data) +{ + const struct gfar_private *priv = data; + const struct platform_device *pdev = to_platform_device(dev); + + return !strcmp(pdev->name, gianfar_mdio_driver.name) && + pdev->id == priv->einfo->mdio_bus; +} + +/* Given a gfar_priv structure, find the mii_bus controlled by this device (not + * necessarily the same as the bus the gfar's PHY is on), if one exists. + * Normally only the first gianfar controls a mii_bus. */ +struct mii_bus *gfar_get_miibus(const struct gfar_private *priv) +{ + /*const*/ struct device *d; + + d = bus_find_device(gianfar_mdio_driver.bus, NULL, (void *)priv, + match_mdio_bus); + return d ? dev_get_drvdata(d) : NULL; +} + int __init gfar_mdio_init(void) { return driver_register(&gianfar_mdio_driver); diff --git a/drivers/net/gianfar_mii.h b/drivers/net/gianfar_mii.h index 2af28b16a0e..02dc970ca1f 100644 --- a/drivers/net/gianfar_mii.h +++ b/drivers/net/gianfar_mii.h @@ -18,6 +18,8 @@ #ifndef __GIANFAR_MII_H #define __GIANFAR_MII_H +struct gfar_private; /* forward ref */ + #define MIIMIND_BUSY 0x00000001 #define MIIMIND_NOTVALID 0x00000004 @@ -44,6 +46,7 @@ int gfar_mdio_write(struct mii_bus *bus, int mii_id, int regnum, u16 value); int gfar_local_mdio_write(struct gfar_mii __iomem *regs, int mii_id, int regnum, u16 value); int gfar_local_mdio_read(struct gfar_mii __iomem *regs, int mii_id, int regnum); +struct mii_bus *gfar_get_miibus(const struct gfar_private *priv); int __init gfar_mdio_init(void); void gfar_mdio_exit(void); #endif /* GIANFAR_PHY_H */ diff --git a/drivers/net/ibm_newemac/core.c b/drivers/net/ibm_newemac/core.c index 2ee2622258f..901212aa37c 100644 --- a/drivers/net/ibm_newemac/core.c +++ b/drivers/net/ibm_newemac/core.c @@ -2605,7 +2605,7 @@ static int __devinit emac_init_config(struct emac_instance *dev) of_device_is_compatible(np, "ibm,emac-440gr")) dev->features |= EMAC_FTR_440EP_PHY_CLK_FIX; if (of_device_is_compatible(np, "ibm,emac-405ez")) { -#ifdef CONFIG_IBM_NEW_EMAC_NO_FLOW_CONTROL +#ifdef CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL dev->features |= EMAC_FTR_NO_FLOW_CONTROL_40x; #else printk(KERN_ERR "%s: Flow control not disabled!\n", diff --git a/drivers/net/irda/ks959-sir.c b/drivers/net/irda/ks959-sir.c index 2482d61662a..2e67ae015d9 100644 --- a/drivers/net/irda/ks959-sir.c +++ b/drivers/net/irda/ks959-sir.c @@ -118,7 +118,6 @@ #include <linux/errno.h> #include <linux/init.h> #include <linux/slab.h> -#include <linux/module.h> #include <linux/kref.h> #include <linux/usb.h> #include <linux/device.h> diff --git a/drivers/net/irda/ksdazzle-sir.c b/drivers/net/irda/ksdazzle-sir.c index 1e0de93fd61..3843b5faba8 100644 --- a/drivers/net/irda/ksdazzle-sir.c +++ b/drivers/net/irda/ksdazzle-sir.c @@ -82,7 +82,6 @@ #include <linux/errno.h> #include <linux/init.h> #include <linux/slab.h> -#include <linux/module.h> #include <linux/kref.h> #include <linux/usb.h> #include <linux/device.h> diff --git a/drivers/net/loopback.c b/drivers/net/loopback.c index 3b43bfd85a0..b1ac63ab8c1 100644 --- a/drivers/net/loopback.c +++ b/drivers/net/loopback.c @@ -76,15 +76,6 @@ static int loopback_xmit(struct sk_buff *skb, struct net_device *dev) skb->protocol = eth_type_trans(skb,dev); -#ifdef LOOPBACK_TSO - if (skb_is_gso(skb)) { - BUG_ON(skb->protocol != htons(ETH_P_IP)); - BUG_ON(ip_hdr(skb)->protocol != IPPROTO_TCP); - - emulate_large_send_offload(skb); - return 0; - } -#endif dev->last_rx = jiffies; /* it's OK to use per_cpu_ptr() because BHs are off */ diff --git a/drivers/net/mlx4/en_main.c b/drivers/net/mlx4/en_main.c index 1b0eebf84f7..4b9794e97a7 100644 --- a/drivers/net/mlx4/en_main.c +++ b/drivers/net/mlx4/en_main.c @@ -35,7 +35,6 @@ #include <linux/module.h> #include <linux/delay.h> #include <linux/netdevice.h> -#include <linux/cpumask.h> #include <linux/mlx4/driver.h> #include <linux/mlx4/device.h> diff --git a/drivers/net/mlx4/fw.c b/drivers/net/mlx4/fw.c index be09fdb79cb..cee199ceba2 100644 --- a/drivers/net/mlx4/fw.c +++ b/drivers/net/mlx4/fw.c @@ -360,9 +360,9 @@ int mlx4_QUERY_DEV_CAP(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap) #define QUERY_PORT_ETH_MTU_OFFSET 0x02 #define QUERY_PORT_WIDTH_OFFSET 0x06 #define QUERY_PORT_MAX_GID_PKEY_OFFSET 0x07 -#define QUERY_PORT_MAC_OFFSET 0x08 #define QUERY_PORT_MAX_MACVLAN_OFFSET 0x0a #define QUERY_PORT_MAX_VL_OFFSET 0x0b +#define QUERY_PORT_MAC_OFFSET 0x10 for (i = 1; i <= dev_cap->num_ports; ++i) { err = mlx4_cmd_box(dev, 0, mailbox->dma, i, 0, MLX4_CMD_QUERY_PORT, diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index a9c8c08044b..b9dcdbd369f 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -1066,9 +1066,12 @@ static int smi_wait_ready(struct mv643xx_eth_shared_private *msp) return 0; } - if (!wait_event_timeout(msp->smi_busy_wait, smi_is_done(msp), - msecs_to_jiffies(100))) - return -ETIMEDOUT; + if (!smi_is_done(msp)) { + wait_event_timeout(msp->smi_busy_wait, smi_is_done(msp), + msecs_to_jiffies(100)); + if (!smi_is_done(msp)) + return -ETIMEDOUT; + } return 0; } diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c index b1556b2e404..a5f428bcc0e 100644 --- a/drivers/net/myri10ge/myri10ge.c +++ b/drivers/net/myri10ge/myri10ge.c @@ -75,7 +75,7 @@ #include "myri10ge_mcp.h" #include "myri10ge_mcp_gen_header.h" -#define MYRI10GE_VERSION_STR "1.4.3-1.371" +#define MYRI10GE_VERSION_STR "1.4.3-1.375" MODULE_DESCRIPTION("Myricom 10G driver (10GbE)"); MODULE_AUTHOR("Maintainer: help@myri.com"); @@ -1393,6 +1393,7 @@ myri10ge_tx_done(struct myri10ge_slice_state *ss, int mcp_index) if (tx->req == tx->done) { tx->queue_active = 0; put_be32(htonl(1), tx->send_stop); + mmiowb(); } __netif_tx_unlock(dev_queue); } @@ -2864,6 +2865,7 @@ again: if ((mgp->dev->real_num_tx_queues > 1) && tx->queue_active == 0) { tx->queue_active = 1; put_be32(htonl(1), tx->send_go); + mmiowb(); } tx->pkt_start++; if ((avail - count) < MXGEFW_MAX_SEND_DESC) { diff --git a/drivers/net/niu.c b/drivers/net/niu.c index ebc81270290..9acb5d70a3a 100644 --- a/drivers/net/niu.c +++ b/drivers/net/niu.c @@ -8667,7 +8667,6 @@ static void __devinit niu_device_announce(struct niu *np) static int __devinit niu_pci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { - unsigned long niureg_base, niureg_len; union niu_parent_id parent_id; struct net_device *dev; struct niu *np; @@ -8758,10 +8757,7 @@ static int __devinit niu_pci_init_one(struct pci_dev *pdev, dev->features |= (NETIF_F_SG | NETIF_F_HW_CSUM); - niureg_base = pci_resource_start(pdev, 0); - niureg_len = pci_resource_len(pdev, 0); - - np->regs = ioremap_nocache(niureg_base, niureg_len); + np->regs = pci_ioremap_bar(pdev, 0); if (!np->regs) { dev_err(&pdev->dev, PFX "Cannot map device registers, " "aborting.\n"); diff --git a/drivers/net/pppoe.c b/drivers/net/pppoe.c index fc6f4b8c64b..b646e92134d 100644 --- a/drivers/net/pppoe.c +++ b/drivers/net/pppoe.c @@ -399,11 +399,11 @@ static int pppoe_rcv(struct sk_buff *skb, if (skb->len < len) goto drop; - po = get_item(ph->sid, eth_hdr(skb)->h_source, dev->ifindex); - if (!po) + if (pskb_trim_rcsum(skb, len)) goto drop; - if (pskb_trim_rcsum(skb, len)) + po = get_item(ph->sid, eth_hdr(skb)->h_source, dev->ifindex); + if (!po) goto drop; return sk_receive_skb(sk_pppox(po), skb, 0); diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c index f59c7772f34..5051554ff05 100644 --- a/drivers/net/smc911x.c +++ b/drivers/net/smc911x.c @@ -499,7 +499,7 @@ static void smc911x_hardware_send_pkt(struct net_device *dev) #else SMC_PUSH_DATA(lp, buf, len); dev->trans_start = jiffies; - dev_kfree_skb(skb); + dev_kfree_skb_irq(skb); #endif if (!lp->tx_throttle) { netif_wake_queue(dev); diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c index c70870e0fd6..fc80f250da3 100644 --- a/drivers/net/smc91x.c +++ b/drivers/net/smc91x.c @@ -2060,7 +2060,7 @@ static int smc_request_attrib(struct platform_device *pdev, struct net_device *ndev) { struct resource * res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "smc91x-attrib"); - struct smc_local *lp = netdev_priv(ndev); + struct smc_local *lp __maybe_unused = netdev_priv(ndev); if (!res) return 0; @@ -2075,7 +2075,7 @@ static void smc_release_attrib(struct platform_device *pdev, struct net_device *ndev) { struct resource * res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "smc91x-attrib"); - struct smc_local *lp = netdev_priv(ndev); + struct smc_local *lp __maybe_unused = netdev_priv(ndev); if (res) release_mem_region(res->start, ATTRIB_SIZE); diff --git a/drivers/net/tulip/dmfe.c b/drivers/net/tulip/dmfe.c index 8e46a513a25..c91852f49a4 100644 --- a/drivers/net/tulip/dmfe.c +++ b/drivers/net/tulip/dmfe.c @@ -420,9 +420,13 @@ static int __devinit dmfe_init_one (struct pci_dev *pdev, /* Allocate Tx/Rx descriptor memory */ db->desc_pool_ptr = pci_alloc_consistent(pdev, sizeof(struct tx_desc) * DESC_ALL_CNT + 0x20, &db->desc_pool_dma_ptr); + if (!db->desc_pool_ptr) + goto err_out_res; db->buf_pool_ptr = pci_alloc_consistent(pdev, TX_BUF_ALLOC * TX_DESC_CNT + 4, &db->buf_pool_dma_ptr); + if (!db->buf_pool_ptr) + goto err_out_free_desc; db->first_tx_desc = (struct tx_desc *) db->desc_pool_ptr; db->first_tx_desc_dma = db->desc_pool_dma_ptr; @@ -469,7 +473,7 @@ static int __devinit dmfe_init_one (struct pci_dev *pdev, err = register_netdev (dev); if (err) - goto err_out_res; + goto err_out_free_buf; printk(KERN_INFO "%s: Davicom DM%04lx at pci%s, " "%s, irq %d.\n", @@ -483,6 +487,12 @@ static int __devinit dmfe_init_one (struct pci_dev *pdev, return 0; +err_out_free_buf: + pci_free_consistent(pdev, TX_BUF_ALLOC * TX_DESC_CNT + 4, + db->buf_pool_ptr, db->buf_pool_dma_ptr); +err_out_free_desc: + pci_free_consistent(pdev, sizeof(struct tx_desc) * DESC_ALL_CNT + 0x20, + db->desc_pool_ptr, db->desc_pool_dma_ptr); err_out_res: pci_release_regions(pdev); err_out_disable: diff --git a/drivers/net/tun.c b/drivers/net/tun.c index 6daea0c9186..33b6d1b122f 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -1070,8 +1070,6 @@ static int tun_chr_close(struct inode *inode, struct file *file) DBG(KERN_INFO "%s: tun_chr_close\n", tun->dev->name); - tun_chr_fasync(-1, file, 0); - rtnl_lock(); /* Detach from net device */ diff --git a/drivers/net/ucc_geth_ethtool.c b/drivers/net/ucc_geth_ethtool.c index cfbbfee5583..85f38a6b6a4 100644 --- a/drivers/net/ucc_geth_ethtool.c +++ b/drivers/net/ucc_geth_ethtool.c @@ -37,7 +37,6 @@ #include <asm/irq.h> #include <asm/uaccess.h> #include <asm/types.h> -#include <asm/uaccess.h> #include "ucc_geth.h" #include "ucc_geth_mii.h" diff --git a/drivers/net/usb/dm9601.c b/drivers/net/usb/dm9601.c index 78df2be8a72..db3377dae9d 100644 --- a/drivers/net/usb/dm9601.c +++ b/drivers/net/usb/dm9601.c @@ -396,6 +396,20 @@ static void dm9601_set_multicast(struct net_device *net) dm_write_reg_async(dev, DM_RX_CTRL, rx_ctl); } +static int dm9601_set_mac_address(struct net_device *net, void *p) +{ + struct sockaddr *addr = p; + struct usbnet *dev = netdev_priv(net); + + if (!is_valid_ether_addr(addr->sa_data)) + return -EINVAL; + + memcpy(net->dev_addr, addr->sa_data, net->addr_len); + dm_write_async(dev, DM_PHY_ADDR, net->addr_len, net->dev_addr); + + return 0; +} + static int dm9601_bind(struct usbnet *dev, struct usb_interface *intf) { int ret; @@ -406,6 +420,7 @@ static int dm9601_bind(struct usbnet *dev, struct usb_interface *intf) dev->net->do_ioctl = dm9601_ioctl; dev->net->set_multicast_list = dm9601_set_multicast; + dev->net->set_mac_address = dm9601_set_mac_address; dev->net->ethtool_ops = &dm9601_ethtool_ops; dev->net->hard_header_len += DM_TX_OVERHEAD; dev->hard_mtu = dev->net->mtu + dev->net->hard_header_len; diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c index 2dced383bcf..3590ea5a902 100644 --- a/drivers/net/via-velocity.c +++ b/drivers/net/via-velocity.c @@ -521,7 +521,7 @@ static void __devexit velocity_remove1(struct pci_dev *pdev) * we don't duplicate code for each option. */ -static void __devinit velocity_set_int_opt(int *opt, int val, int min, int max, int def, char *name, char *devname) +static void __devinit velocity_set_int_opt(int *opt, int val, int min, int max, int def, char *name, const char *devname) { if (val == -1) *opt = def; @@ -550,7 +550,7 @@ static void __devinit velocity_set_int_opt(int *opt, int val, int min, int max, * we don't duplicate code for each option. */ -static void __devinit velocity_set_bool_opt(u32 * opt, int val, int def, u32 flag, char *name, char *devname) +static void __devinit velocity_set_bool_opt(u32 * opt, int val, int def, u32 flag, char *name, const char *devname) { (*opt) &= (~flag); if (val == -1) @@ -576,7 +576,7 @@ static void __devinit velocity_set_bool_opt(u32 * opt, int val, int def, u32 fla * for the current device */ -static void __devinit velocity_get_options(struct velocity_opt *opts, int index, char *devname) +static void __devinit velocity_get_options(struct velocity_opt *opts, int index, const char *devname) { velocity_set_int_opt(&opts->rx_thresh, rx_thresh[index], RX_THRESH_MIN, RX_THRESH_MAX, RX_THRESH_DEF, "rx_thresh", devname); @@ -863,6 +863,7 @@ static int __devinit velocity_found1(struct pci_dev *pdev, const struct pci_devi static int first = 1; struct net_device *dev; int i; + const char *drv_string; const struct velocity_info_tbl *info = &chip_info_table[ent->driver_data]; struct velocity_info *vptr; struct mac_regs __iomem * regs; @@ -935,7 +936,9 @@ static int __devinit velocity_found1(struct pci_dev *pdev, const struct pci_devi dev->dev_addr[i] = readb(®s->PAR[i]); - velocity_get_options(&vptr->options, velocity_nics, dev->name); + drv_string = dev_driver_string(&pdev->dev); + + velocity_get_options(&vptr->options, velocity_nics, drv_string); /* * Mask out the options cannot be set to the chip diff --git a/drivers/net/wan/syncppp.c b/drivers/net/wan/syncppp.c index 327d58589e1..6e92f7b44b1 100644 --- a/drivers/net/wan/syncppp.c +++ b/drivers/net/wan/syncppp.c @@ -756,10 +756,11 @@ static void sppp_cisco_input (struct sppp *sp, struct sk_buff *skb) case CISCO_ADDR_REQ: /* Stolen from net/ipv4/devinet.c -- SIOCGIFADDR ioctl */ { - struct in_device *in_dev; - struct in_ifaddr *ifa; __be32 addr = 0, mask = htonl(~0U); /* FIXME: is the mask correct? */ #ifdef CONFIG_INET + struct in_device *in_dev; + struct in_ifaddr *ifa; + rcu_read_lock(); if ((in_dev = __in_dev_get_rcu(dev)) != NULL) { diff --git a/drivers/net/wan/z85230.c b/drivers/net/wan/z85230.c index ccd9cd35ecb..5bf7e01ef0e 100644 --- a/drivers/net/wan/z85230.c +++ b/drivers/net/wan/z85230.c @@ -695,7 +695,6 @@ EXPORT_SYMBOL(z8530_nop); * z8530_interrupt - Handle an interrupt from a Z8530 * @irq: Interrupt number * @dev_id: The Z8530 device that is interrupting. - * @regs: unused * * A Z85[2]30 device has stuck its hand in the air for attention. * We scan both the channels on the chip for events and then call diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c index 0f1d6bdd51a..cfd4d052d66 100644 --- a/drivers/net/wireless/ath5k/base.c +++ b/drivers/net/wireless/ath5k/base.c @@ -661,8 +661,7 @@ ath5k_pci_resume(struct pci_dev *pdev) { struct ieee80211_hw *hw = pci_get_drvdata(pdev); struct ath5k_softc *sc = hw->priv; - struct ath5k_hw *ah = sc->ah; - int i, err; + int err; pci_restore_state(pdev); @@ -688,16 +687,6 @@ ath5k_pci_resume(struct pci_dev *pdev) goto err_irq; ath5k_led_enable(sc); - /* - * Reset the key cache since some parts do not - * reset the contents on initial power up or resume. - * - * FIXME: This may need to be revisited when mac80211 becomes - * aware of suspend/resume. - */ - for (i = 0; i < AR5K_KEYTABLE_SIZE; i++) - ath5k_hw_reset_key(ah, i); - return 0; err_irq: free_irq(pdev->irq, sc); @@ -718,7 +707,6 @@ ath5k_attach(struct pci_dev *pdev, struct ieee80211_hw *hw) struct ath5k_softc *sc = hw->priv; struct ath5k_hw *ah = sc->ah; u8 mac[ETH_ALEN]; - unsigned int i; int ret; ATH5K_DBG(sc, ATH5K_DEBUG_ANY, "devid 0x%x\n", pdev->device); @@ -737,13 +725,6 @@ ath5k_attach(struct pci_dev *pdev, struct ieee80211_hw *hw) __set_bit(ATH_STAT_MRRETRY, sc->status); /* - * Reset the key cache since some parts do not - * reset the contents on initial power up. - */ - for (i = 0; i < AR5K_KEYTABLE_SIZE; i++) - ath5k_hw_reset_key(ah, i); - - /* * Collect the channel list. The 802.11 layer * is resposible for filtering this list based * on settings like the phy mode and regulatory @@ -2202,7 +2183,8 @@ ath5k_beacon_config(struct ath5k_softc *sc) static int ath5k_init(struct ath5k_softc *sc, bool is_resume) { - int ret; + struct ath5k_hw *ah = sc->ah; + int ret, i; mutex_lock(&sc->lock); @@ -2235,10 +2217,17 @@ ath5k_init(struct ath5k_softc *sc, bool is_resume) if (ret) goto done; + /* + * Reset the key cache since some parts do not reset the + * contents on initial power up or resume from suspend. + */ + for (i = 0; i < AR5K_KEYTABLE_SIZE; i++) + ath5k_hw_reset_key(ah, i); + __set_bit(ATH_STAT_STARTED, sc->status); /* Set ack to be sent at low bit-rates */ - ath5k_hw_set_ack_bitrate_high(sc->ah, false); + ath5k_hw_set_ack_bitrate_high(ah, false); mod_timer(&sc->calib_tim, round_jiffies(jiffies + msecs_to_jiffies(ath5k_calinterval * 1000))); diff --git a/drivers/net/wireless/ath5k/debug.c b/drivers/net/wireless/ath5k/debug.c index 8f92d670f61..19980cbd5d5 100644 --- a/drivers/net/wireless/ath5k/debug.c +++ b/drivers/net/wireless/ath5k/debug.c @@ -339,7 +339,7 @@ static struct { { ATH5K_DEBUG_BEACON, "beacon", "beacon handling" }, { ATH5K_DEBUG_CALIBRATE, "calib", "periodic calibration" }, { ATH5K_DEBUG_TXPOWER, "txpower", "transmit power setting" }, - { ATH5K_DEBUG_LED, "led", "LED mamagement" }, + { ATH5K_DEBUG_LED, "led", "LED management" }, { ATH5K_DEBUG_DUMP_RX, "dumprx", "print received skb content" }, { ATH5K_DEBUG_DUMP_TX, "dumptx", "print transmit skb content" }, { ATH5K_DEBUG_DUMPBANDS, "dumpbands", "dump bands" }, diff --git a/drivers/net/wireless/ath5k/desc.c b/drivers/net/wireless/ath5k/desc.c index dd1374052ba..5e362a7a362 100644 --- a/drivers/net/wireless/ath5k/desc.c +++ b/drivers/net/wireless/ath5k/desc.c @@ -531,10 +531,10 @@ static int ath5k_hw_proc_5210_rx_status(struct ath5k_hw *ah, AR5K_5210_RX_DESC_STATUS0_RECEIVE_SIGNAL); rs->rs_rate = AR5K_REG_MS(rx_status->rx_status_0, AR5K_5210_RX_DESC_STATUS0_RECEIVE_RATE); - rs->rs_antenna = rx_status->rx_status_0 & - AR5K_5210_RX_DESC_STATUS0_RECEIVE_ANTENNA; - rs->rs_more = rx_status->rx_status_0 & - AR5K_5210_RX_DESC_STATUS0_MORE; + rs->rs_antenna = AR5K_REG_MS(rx_status->rx_status_0, + AR5K_5210_RX_DESC_STATUS0_RECEIVE_ANTENNA); + rs->rs_more = !!(rx_status->rx_status_0 & + AR5K_5210_RX_DESC_STATUS0_MORE); /* TODO: this timestamp is 13 bit, later on we assume 15 bit */ rs->rs_tstamp = AR5K_REG_MS(rx_status->rx_status_1, AR5K_5210_RX_DESC_STATUS1_RECEIVE_TIMESTAMP); @@ -607,10 +607,10 @@ static int ath5k_hw_proc_5212_rx_status(struct ath5k_hw *ah, AR5K_5212_RX_DESC_STATUS0_RECEIVE_SIGNAL); rs->rs_rate = AR5K_REG_MS(rx_status->rx_status_0, AR5K_5212_RX_DESC_STATUS0_RECEIVE_RATE); - rs->rs_antenna = rx_status->rx_status_0 & - AR5K_5212_RX_DESC_STATUS0_RECEIVE_ANTENNA; - rs->rs_more = rx_status->rx_status_0 & - AR5K_5212_RX_DESC_STATUS0_MORE; + rs->rs_antenna = AR5K_REG_MS(rx_status->rx_status_0, + AR5K_5212_RX_DESC_STATUS0_RECEIVE_ANTENNA); + rs->rs_more = !!(rx_status->rx_status_0 & + AR5K_5212_RX_DESC_STATUS0_MORE); rs->rs_tstamp = AR5K_REG_MS(rx_status->rx_status_1, AR5K_5212_RX_DESC_STATUS1_RECEIVE_TIMESTAMP); rs->rs_status = 0; diff --git a/drivers/net/wireless/ath5k/initvals.c b/drivers/net/wireless/ath5k/initvals.c index ea2e1a20b49..ceaa6c475c0 100644 --- a/drivers/net/wireless/ath5k/initvals.c +++ b/drivers/net/wireless/ath5k/initvals.c @@ -806,6 +806,8 @@ static const struct ath5k_ini_mode ar5212_rf5111_ini_mode_end[] = { { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, { AR5K_PHY(642), { 0xd03e6788, 0xd03e6788, 0xd03e6788, 0xd03e6788, 0xd03e6788 } }, + { 0xa228, + { 0x000001b5, 0x000001b5, 0x000001b5, 0x000001b5, 0x000001b5 } }, { 0xa23c, { 0x13c889af, 0x13c889af, 0x13c889af, 0x13c889af, 0x13c889af } }, }; diff --git a/drivers/net/wireless/ath5k/reset.c b/drivers/net/wireless/ath5k/reset.c index 8f1886834e6..1b6d45b6772 100644 --- a/drivers/net/wireless/ath5k/reset.c +++ b/drivers/net/wireless/ath5k/reset.c @@ -537,9 +537,10 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode, mdelay(1); /* - * Write some more initial register settings + * Write some more initial register settings for revised chips */ - if (ah->ah_version == AR5K_AR5212) { + if (ah->ah_version == AR5K_AR5212 && + ah->ah_phy_revision > 0x41) { ath5k_hw_reg_write(ah, 0x0002a002, 0x982c); if (channel->hw_value == CHANNEL_G) @@ -558,19 +559,10 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode, else ath5k_hw_reg_write(ah, 0x00000000, 0x994c); - /* Some bits are disabled here, we know nothing about - * register 0xa228 yet, most of the times this ends up - * with a value 0x9b5 -haven't seen any dump with - * a different value- */ - /* Got this from decompiling binary HAL */ - data = ath5k_hw_reg_read(ah, 0xa228); - data &= 0xfffffdff; - ath5k_hw_reg_write(ah, data, 0xa228); - - data = ath5k_hw_reg_read(ah, 0xa228); - data &= 0xfffe03ff; - ath5k_hw_reg_write(ah, data, 0xa228); - data = 0; + /* Got this from legacy-hal */ + AR5K_REG_DISABLE_BITS(ah, 0xa228, 0x200); + + AR5K_REG_MASKED_BITS(ah, 0xa228, 0x800, 0xfffe03ff); /* Just write 0x9b5 ? */ /* ath5k_hw_reg_write(ah, 0x000009b5, 0xa228); */ diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index 24a1aeb6448..8d690a0eb1a 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -2090,7 +2090,6 @@ static void iwl_alive_start(struct iwl_priv *priv) iwl4965_error_recovery(priv); iwl_power_update_mode(priv, 1); - ieee80211_notify_mac(priv->hw, IEEE80211_NOTIFY_RE_ASSOC); if (test_and_clear_bit(STATUS_MODE_PENDING, &priv->status)) iwl4965_set_mode(priv, priv->iw_mode); @@ -2342,6 +2341,7 @@ static void iwl_bg_alive_start(struct work_struct *data) mutex_lock(&priv->mutex); iwl_alive_start(priv); mutex_unlock(&priv->mutex); + ieee80211_notify_mac(priv->hw, IEEE80211_NOTIFY_RE_ASSOC); } static void iwl4965_bg_rf_kill(struct work_struct *work) @@ -3252,7 +3252,11 @@ static void iwl4965_mac_update_tkip_key(struct ieee80211_hw *hw, return; } - iwl_scan_cancel_timeout(priv, 100); + if (iwl_scan_cancel(priv)) { + /* cancel scan failed, just live w/ bad key and rely + briefly on SW decryption */ + return; + } key_flags |= (STA_KEY_FLG_TKIP | STA_KEY_FLG_MAP_KEY_MSK); key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS); diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c index 3b0bee331a3..c89365e2ca5 100644 --- a/drivers/net/wireless/iwlwifi/iwl-scan.c +++ b/drivers/net/wireless/iwlwifi/iwl-scan.c @@ -896,6 +896,13 @@ static void iwl_bg_request_scan(struct work_struct *data) return; done: + /* Cannot perform scan. Make sure we clear scanning + * bits from status so next scan request can be performed. + * If we don't clear scanning status bit here all next scan + * will fail + */ + clear_bit(STATUS_SCAN_HW, &priv->status); + clear_bit(STATUS_SCANNING, &priv->status); /* inform mac80211 scan aborted */ queue_work(priv->workqueue, &priv->scan_completed); mutex_unlock(&priv->mutex); diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index d15a2c99795..285b53e7e26 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -5768,7 +5768,6 @@ static void iwl3945_alive_start(struct iwl3945_priv *priv) if (priv->error_recovering) iwl3945_error_recovery(priv); - ieee80211_notify_mac(priv->hw, IEEE80211_NOTIFY_RE_ASSOC); return; restart: @@ -6013,6 +6012,7 @@ static void iwl3945_bg_alive_start(struct work_struct *data) mutex_lock(&priv->mutex); iwl3945_alive_start(priv); mutex_unlock(&priv->mutex); + ieee80211_notify_mac(priv->hw, IEEE80211_NOTIFY_RE_ASSOC); } static void iwl3945_bg_rf_kill(struct work_struct *work) @@ -6256,6 +6256,11 @@ static void iwl3945_bg_request_scan(struct work_struct *data) n_probes, (void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)]); + if (scan->channel_count == 0) { + IWL_DEBUG_SCAN("channel count %d\n", scan->channel_count); + goto done; + } + cmd.len += le16_to_cpu(scan->tx_cmd.len) + scan->channel_count * sizeof(struct iwl3945_scan_channel); cmd.data = scan; @@ -6273,6 +6278,14 @@ static void iwl3945_bg_request_scan(struct work_struct *data) return; done: + /* can not perform scan make sure we clear scanning + * bits from status so next scan request can be performed. + * if we dont clear scanning status bit here all next scan + * will fail + */ + clear_bit(STATUS_SCAN_HW, &priv->status); + clear_bit(STATUS_SCANNING, &priv->status); + /* inform mac80211 scan aborted */ queue_work(priv->workqueue, &priv->scan_completed); mutex_unlock(&priv->mutex); diff --git a/drivers/net/wireless/libertas/cmd.c b/drivers/net/wireless/libertas/cmd.c index 297696de2da..8265c7d25ed 100644 --- a/drivers/net/wireless/libertas/cmd.c +++ b/drivers/net/wireless/libertas/cmd.c @@ -605,9 +605,9 @@ int lbs_get_tx_power(struct lbs_private *priv, s16 *curlevel, s16 *minlevel, if (ret == 0) { *curlevel = le16_to_cpu(cmd.curlevel); if (minlevel) - *minlevel = le16_to_cpu(cmd.minlevel); + *minlevel = cmd.minlevel; if (maxlevel) - *maxlevel = le16_to_cpu(cmd.maxlevel); + *maxlevel = cmd.maxlevel; } lbs_deb_leave(LBS_DEB_CMD); diff --git a/drivers/net/wireless/libertas/rx.c b/drivers/net/wireless/libertas/rx.c index 5749f22b296..079e6aa874d 100644 --- a/drivers/net/wireless/libertas/rx.c +++ b/drivers/net/wireless/libertas/rx.c @@ -328,7 +328,7 @@ static int process_rxed_802_11_packet(struct lbs_private *priv, lbs_deb_rx("rx err: frame received with bad length\n"); priv->stats.rx_length_errors++; ret = -EINVAL; - kfree(skb); + kfree_skb(skb); goto done; } diff --git a/drivers/net/wireless/libertas/scan.c b/drivers/net/wireless/libertas/scan.c index 8f66903641b..22c4c611052 100644 --- a/drivers/net/wireless/libertas/scan.c +++ b/drivers/net/wireless/libertas/scan.c @@ -598,8 +598,8 @@ static int lbs_process_bss(struct bss_descriptor *bss, switch (elem->id) { case MFIE_TYPE_SSID: - bss->ssid_len = elem->len; - memcpy(bss->ssid, elem->data, elem->len); + bss->ssid_len = min_t(int, 32, elem->len); + memcpy(bss->ssid, elem->data, bss->ssid_len); lbs_deb_scan("got SSID IE: '%s', len %u\n", escape_essid(bss->ssid, bss->ssid_len), bss->ssid_len); diff --git a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c index 2d022f83774..827ca0384a4 100644 --- a/drivers/net/wireless/p54/p54common.c +++ b/drivers/net/wireless/p54/p54common.c @@ -319,7 +319,7 @@ static int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len) void *tmp; int err; u8 *end = (u8 *)eeprom + len; - u16 synth; + u16 synth = 0; DECLARE_MAC_BUF(mac); wrap = (struct eeprom_pda_wrap *) eeprom; @@ -422,7 +422,8 @@ static int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len) entry = (void *)entry + (entry_len + 1)*2; } - if (!priv->iq_autocal || !priv->output_limit || !priv->curve_data) { + if (!synth || !priv->iq_autocal || !priv->output_limit || + !priv->curve_data) { printk(KERN_ERR "p54: not all required entries found in eeprom!\n"); err = -EINVAL; goto err; diff --git a/drivers/net/wireless/p54/p54pci.c b/drivers/net/wireless/p54/p54pci.c index 1c2a02a741a..88b3cad8b65 100644 --- a/drivers/net/wireless/p54/p54pci.c +++ b/drivers/net/wireless/p54/p54pci.c @@ -346,68 +346,6 @@ static void p54p_tx(struct ieee80211_hw *dev, struct p54_control_hdr *data, printk(KERN_INFO "%s: tx overflow.\n", wiphy_name(dev->wiphy)); } -static int p54p_open(struct ieee80211_hw *dev) -{ - struct p54p_priv *priv = dev->priv; - int err; - - init_completion(&priv->boot_comp); - err = request_irq(priv->pdev->irq, &p54p_interrupt, - IRQF_SHARED, "p54pci", dev); - if (err) { - printk(KERN_ERR "%s: failed to register IRQ handler\n", - wiphy_name(dev->wiphy)); - return err; - } - - memset(priv->ring_control, 0, sizeof(*priv->ring_control)); - err = p54p_upload_firmware(dev); - if (err) { - free_irq(priv->pdev->irq, dev); - return err; - } - priv->rx_idx_data = priv->tx_idx_data = 0; - priv->rx_idx_mgmt = priv->tx_idx_mgmt = 0; - - p54p_refill_rx_ring(dev, 0, priv->ring_control->rx_data, - ARRAY_SIZE(priv->ring_control->rx_data), priv->rx_buf_data); - - p54p_refill_rx_ring(dev, 2, priv->ring_control->rx_mgmt, - ARRAY_SIZE(priv->ring_control->rx_mgmt), priv->rx_buf_mgmt); - - P54P_WRITE(ring_control_base, cpu_to_le32(priv->ring_control_dma)); - P54P_READ(ring_control_base); - wmb(); - udelay(10); - - P54P_WRITE(int_enable, cpu_to_le32(ISL38XX_INT_IDENT_INIT)); - P54P_READ(int_enable); - wmb(); - udelay(10); - - P54P_WRITE(dev_int, cpu_to_le32(ISL38XX_DEV_INT_RESET)); - P54P_READ(dev_int); - - if (!wait_for_completion_interruptible_timeout(&priv->boot_comp, HZ)) { - printk(KERN_ERR "%s: Cannot boot firmware!\n", - wiphy_name(dev->wiphy)); - free_irq(priv->pdev->irq, dev); - return -ETIMEDOUT; - } - - P54P_WRITE(int_enable, cpu_to_le32(ISL38XX_INT_IDENT_UPDATE)); - P54P_READ(int_enable); - wmb(); - udelay(10); - - P54P_WRITE(dev_int, cpu_to_le32(ISL38XX_DEV_INT_UPDATE)); - P54P_READ(dev_int); - wmb(); - udelay(10); - - return 0; -} - static void p54p_stop(struct ieee80211_hw *dev) { struct p54p_priv *priv = dev->priv; @@ -474,6 +412,68 @@ static void p54p_stop(struct ieee80211_hw *dev) memset(ring_control, 0, sizeof(*ring_control)); } +static int p54p_open(struct ieee80211_hw *dev) +{ + struct p54p_priv *priv = dev->priv; + int err; + + init_completion(&priv->boot_comp); + err = request_irq(priv->pdev->irq, &p54p_interrupt, + IRQF_SHARED, "p54pci", dev); + if (err) { + printk(KERN_ERR "%s: failed to register IRQ handler\n", + wiphy_name(dev->wiphy)); + return err; + } + + memset(priv->ring_control, 0, sizeof(*priv->ring_control)); + err = p54p_upload_firmware(dev); + if (err) { + free_irq(priv->pdev->irq, dev); + return err; + } + priv->rx_idx_data = priv->tx_idx_data = 0; + priv->rx_idx_mgmt = priv->tx_idx_mgmt = 0; + + p54p_refill_rx_ring(dev, 0, priv->ring_control->rx_data, + ARRAY_SIZE(priv->ring_control->rx_data), priv->rx_buf_data); + + p54p_refill_rx_ring(dev, 2, priv->ring_control->rx_mgmt, + ARRAY_SIZE(priv->ring_control->rx_mgmt), priv->rx_buf_mgmt); + + P54P_WRITE(ring_control_base, cpu_to_le32(priv->ring_control_dma)); + P54P_READ(ring_control_base); + wmb(); + udelay(10); + + P54P_WRITE(int_enable, cpu_to_le32(ISL38XX_INT_IDENT_INIT)); + P54P_READ(int_enable); + wmb(); + udelay(10); + + P54P_WRITE(dev_int, cpu_to_le32(ISL38XX_DEV_INT_RESET)); + P54P_READ(dev_int); + + if (!wait_for_completion_interruptible_timeout(&priv->boot_comp, HZ)) { + printk(KERN_ERR "%s: Cannot boot firmware!\n", + wiphy_name(dev->wiphy)); + p54p_stop(dev); + return -ETIMEDOUT; + } + + P54P_WRITE(int_enable, cpu_to_le32(ISL38XX_INT_IDENT_UPDATE)); + P54P_READ(int_enable); + wmb(); + udelay(10); + + P54P_WRITE(dev_int, cpu_to_le32(ISL38XX_DEV_INT_UPDATE)); + P54P_READ(dev_int); + wmb(); + udelay(10); + + return 0; +} + static int __devinit p54p_probe(struct pci_dev *pdev, const struct pci_device_id *id) { @@ -556,11 +556,13 @@ static int __devinit p54p_probe(struct pci_dev *pdev, spin_lock_init(&priv->lock); tasklet_init(&priv->rx_tasklet, p54p_rx_tasklet, (unsigned long)dev); - p54p_open(dev); + err = p54p_open(dev); + if (err) + goto err_free_common; err = p54_read_eeprom(dev); p54p_stop(dev); if (err) - goto err_free_desc; + goto err_free_common; err = ieee80211_register_hw(dev); if (err) { @@ -573,8 +575,6 @@ static int __devinit p54p_probe(struct pci_dev *pdev, err_free_common: p54_free_common(dev); - - err_free_desc: pci_free_consistent(pdev, sizeof(*priv->ring_control), priv->ring_control, priv->ring_control_dma); diff --git a/drivers/net/wireless/rt2x00/Kconfig b/drivers/net/wireless/rt2x00/Kconfig index f839ce044af..95511ac2247 100644 --- a/drivers/net/wireless/rt2x00/Kconfig +++ b/drivers/net/wireless/rt2x00/Kconfig @@ -1,5 +1,5 @@ menuconfig RT2X00 - bool "Ralink driver support" + tristate "Ralink driver support" depends on MAC80211 && WLAN_80211 && EXPERIMENTAL ---help--- This will enable the experimental support for the Ralink drivers, diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c index a60ae86bd5c..a3ccd8c1c71 100644 --- a/drivers/net/wireless/zd1211rw/zd_usb.c +++ b/drivers/net/wireless/zd1211rw/zd_usb.c @@ -61,6 +61,7 @@ static struct usb_device_id usb_ids[] = { { USB_DEVICE(0x0105, 0x145f), .driver_info = DEVICE_ZD1211 }, /* ZD1211B */ { USB_DEVICE(0x0ace, 0x1215), .driver_info = DEVICE_ZD1211B }, + { USB_DEVICE(0x0ace, 0xb215), .driver_info = DEVICE_ZD1211B }, { USB_DEVICE(0x157e, 0x300d), .driver_info = DEVICE_ZD1211B }, { USB_DEVICE(0x079b, 0x0062), .driver_info = DEVICE_ZD1211B }, { USB_DEVICE(0x1582, 0x6003), .driver_info = DEVICE_ZD1211B }, @@ -82,6 +83,7 @@ static struct usb_device_id usb_ids[] = { { USB_DEVICE(0x0cde, 0x001a), .driver_info = DEVICE_ZD1211B }, { USB_DEVICE(0x0586, 0x340a), .driver_info = DEVICE_ZD1211B }, { USB_DEVICE(0x0471, 0x1237), .driver_info = DEVICE_ZD1211B }, + { USB_DEVICE(0x07fa, 0x1196), .driver_info = DEVICE_ZD1211B }, /* "Driverless" devices that need ejecting */ { USB_DEVICE(0x0ace, 0x2011), .driver_info = DEVICE_INSTALLER }, { USB_DEVICE(0x0ace, 0x20ff), .driver_info = DEVICE_INSTALLER }, diff --git a/drivers/of/device.c b/drivers/of/device.c index 51e5214071d..224ae6bc67b 100644 --- a/drivers/of/device.c +++ b/drivers/of/device.c @@ -105,7 +105,16 @@ EXPORT_SYMBOL(of_release_dev); int of_device_register(struct of_device *ofdev) { BUG_ON(ofdev->node == NULL); - return device_register(&ofdev->dev); + + device_initialize(&ofdev->dev); + + /* device_add will assume that this device is on the same node as + * the parent. If there is no parent defined, set the node + * explicitly */ + if (!ofdev->dev.parent) + set_dev_node(&ofdev->dev, of_node_to_nid(ofdev->node)); + + return device_add(&ofdev->dev); } EXPORT_SYMBOL(of_device_register); diff --git a/drivers/parport/parport_cs.c b/drivers/parport/parport_cs.c index b1899e9c1f6..0cd5fbc7f2c 100644 --- a/drivers/parport/parport_cs.c +++ b/drivers/parport/parport_cs.c @@ -112,7 +112,7 @@ static int parport_probe(struct pcmcia_device *link) link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; link->io.Attributes2 = IO_DATA_PATH_WIDTH_8; - link->irq.Attributes = IRQ_TYPE_EXCLUSIVE; + link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING; link->irq.IRQInfo1 = IRQ_LEVEL_ID; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c index dfe7c8e1b18..b3a63edb690 100644 --- a/drivers/pci/pci-acpi.c +++ b/drivers/pci/pci-acpi.c @@ -83,6 +83,9 @@ static acpi_status acpi_run_osc(acpi_handle handle, if (ACPI_FAILURE(status)) return status; + if (!output.length) + return AE_NULL_OBJECT; + out_obj = output.pointer; if (out_obj->type != ACPI_TYPE_BUFFER) { printk(KERN_DEBUG "Evaluate _OSC returns wrong type\n"); diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c index 110022d7868..5d72866897a 100644 --- a/drivers/pci/pci-sysfs.c +++ b/drivers/pci/pci-sysfs.c @@ -575,7 +575,7 @@ static int pci_mmap_fits(struct pci_dev *pdev, int resno, struct vm_area_struct nr = (vma->vm_end - vma->vm_start) >> PAGE_SHIFT; start = vma->vm_pgoff; - size = pci_resource_len(pdev, resno) >> PAGE_SHIFT; + size = ((pci_resource_len(pdev, resno) - 1) >> PAGE_SHIFT) + 1; if (start < size && size - start >= nr) return 1; WARN(1, "process \"%s\" tried to map 0x%08lx-0x%08lx on %s BAR %d (size 0x%08lx)\n", diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 96cf8ecd04c..5049a47030a 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -43,20 +43,6 @@ static void __devinit quirk_mellanox_tavor(struct pci_dev *dev) DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MELLANOX,PCI_DEVICE_ID_MELLANOX_TAVOR,quirk_mellanox_tavor); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MELLANOX,PCI_DEVICE_ID_MELLANOX_TAVOR_BRIDGE,quirk_mellanox_tavor); -/* Many VIA bridges seem to corrupt data for DAC. Disable it here */ -int forbid_dac __read_mostly; -EXPORT_SYMBOL(forbid_dac); - -static __devinit void via_no_dac(struct pci_dev *dev) -{ - if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI && forbid_dac == 0) { - dev_info(&dev->dev, - "VIA PCI bridge detected. Disabling DAC.\n"); - forbid_dac = 1; - } -} -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_ANY_ID, via_no_dac); - /* Deal with broken BIOS'es that neglect to enable passive release, which can cause problems in combination with the 82441FX/PPro MTRRs */ static void quirk_passive_release(struct pci_dev *dev) @@ -1706,24 +1692,24 @@ static void __devinit quirk_brcm_570x_limit_vpd(struct pci_dev *dev) } } -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM, - PCI_DEVICE_ID_NX2_5706, - quirk_brcm_570x_limit_vpd); -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM, - PCI_DEVICE_ID_NX2_5706S, - quirk_brcm_570x_limit_vpd); -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM, - PCI_DEVICE_ID_NX2_5708, - quirk_brcm_570x_limit_vpd); -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM, - PCI_DEVICE_ID_NX2_5708S, - quirk_brcm_570x_limit_vpd); -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM, - PCI_DEVICE_ID_NX2_5709, - quirk_brcm_570x_limit_vpd); -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM, - PCI_DEVICE_ID_NX2_5709S, - quirk_brcm_570x_limit_vpd); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, + PCI_DEVICE_ID_NX2_5706, + quirk_brcm_570x_limit_vpd); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, + PCI_DEVICE_ID_NX2_5706S, + quirk_brcm_570x_limit_vpd); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, + PCI_DEVICE_ID_NX2_5708, + quirk_brcm_570x_limit_vpd); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, + PCI_DEVICE_ID_NX2_5708S, + quirk_brcm_570x_limit_vpd); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, + PCI_DEVICE_ID_NX2_5709, + quirk_brcm_570x_limit_vpd); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, + PCI_DEVICE_ID_NX2_5709S, + quirk_brcm_570x_limit_vpd); #ifdef CONFIG_PCI_MSI /* Some chipsets do not support MSI. We cannot easily rely on setting diff --git a/drivers/pci/rom.c b/drivers/pci/rom.c index 1f5f6143f35..132a78159b6 100644 --- a/drivers/pci/rom.c +++ b/drivers/pci/rom.c @@ -100,7 +100,8 @@ size_t pci_get_rom_size(void __iomem *rom, size_t size) * pci_map_rom - map a PCI ROM to kernel space * @pdev: pointer to pci device struct * @size: pointer to receive size of pci window over ROM - * @return: kernel virtual pointer to image of ROM + * + * Return: kernel virtual pointer to image of ROM * * Map a PCI ROM into kernel space. If ROM is boot video ROM, * the shadow BIOS copy will be returned instead of the @@ -167,7 +168,8 @@ void __iomem *pci_map_rom(struct pci_dev *pdev, size_t *size) * pci_map_rom_copy - map a PCI ROM to kernel space, create a copy * @pdev: pointer to pci device struct * @size: pointer to receive size of pci window over ROM - * @return: kernel virtual pointer to image of ROM + * + * Return: kernel virtual pointer to image of ROM * * Map a PCI ROM into kernel space. If ROM is boot video ROM, * the shadow BIOS copy will be returned instead of the diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig index f57eeae3830..222904411a1 100644 --- a/drivers/pcmcia/Kconfig +++ b/drivers/pcmcia/Kconfig @@ -188,10 +188,6 @@ config PCMCIA_M8XX This driver is also available as a module called m8xx_pcmcia. -config HD64465_PCMCIA - tristate "HD64465 host bridge support" - depends on HD64465 && PCMCIA - config PCMCIA_AU1X00 tristate "Au1x00 pcmcia support" depends on SOC_AU1X00 && PCMCIA diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile index 23e492bf75c..238629ad7f7 100644 --- a/drivers/pcmcia/Makefile +++ b/drivers/pcmcia/Makefile @@ -22,7 +22,6 @@ obj-$(CONFIG_I82365) += i82365.o obj-$(CONFIG_I82092) += i82092.o obj-$(CONFIG_TCIC) += tcic.o obj-$(CONFIG_PCMCIA_M8XX) += m8xx_pcmcia.o -obj-$(CONFIG_HD64465_PCMCIA) += hd64465_ss.o obj-$(CONFIG_PCMCIA_SA1100) += sa11xx_core.o sa1100_cs.o obj-$(CONFIG_PCMCIA_SA1111) += sa11xx_core.o sa1111_cs.o obj-$(CONFIG_M32R_PCC) += m32r_pcc.o diff --git a/drivers/pcmcia/hd64465_ss.c b/drivers/pcmcia/hd64465_ss.c deleted file mode 100644 index 9ef69cdb318..00000000000 --- a/drivers/pcmcia/hd64465_ss.c +++ /dev/null @@ -1,939 +0,0 @@ -/* - * Device driver for the PCMCIA controller module of the - * Hitachi HD64465 handheld companion chip. - * - * Note that the HD64465 provides a very thin PCMCIA host bridge - * layer, requiring a lot of the work of supporting cards to be - * performed by the processor. For example: mapping of card - * interrupts to processor IRQs is done by IRQ demuxing software; - * IO and memory mappings are fixed; setting voltages according - * to card Voltage Select pins etc is done in software. - * - * Note also that this driver uses only the simple, fixed, - * 16MB, 16-bit wide mappings to PCMCIA spaces defined by the - * HD64465. Larger mappings, smaller mappings, or mappings of - * different width to the same socket, are all possible only by - * involving the SH7750's MMU, which is considered unnecessary here. - * The downside is that it may be possible for some drivers to - * break because they need or expect 8-bit mappings. - * - * This driver currently supports only the following configuration: - * SH7750 CPU, HD64465, TPS2206 voltage control chip. - * - * by Greg Banks <gbanks@pocketpenguins.com> - * (c) 2000 PocketPenguins Inc - */ - -#include <linux/types.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/string.h> -#include <linux/kernel.h> -#include <linux/ioport.h> -#include <linux/mm.h> -#include <linux/vmalloc.h> -#include <asm/errno.h> -#include <linux/irq.h> -#include <linux/interrupt.h> -#include <linux/platform_device.h> - -#include <asm/io.h> -#include <asm/hd64465/hd64465.h> -#include <asm/hd64465/io.h> - -#include <pcmcia/cs_types.h> -#include <pcmcia/cs.h> -#include <pcmcia/cistpl.h> -#include <pcmcia/ds.h> -#include <pcmcia/ss.h> - -#define MODNAME "hd64465_ss" - -/* #define HD64465_DEBUG 1 */ - -#if HD64465_DEBUG -#define DPRINTK(args...) printk(MODNAME ": " args) -#else -#define DPRINTK(args...) -#endif - -extern int hd64465_io_debug; -extern void * p3_ioremap(unsigned long phys_addr, unsigned long size, unsigned long flags); -extern void p3_iounmap(void *addr); - -/*============================================================*/ - -#define HS_IO_MAP_SIZE (64*1024) - -typedef struct hs_socket_t -{ - unsigned int number; - u_int irq; - u_long mem_base; - void *io_base; - u_long mem_length; - u_int ctrl_base; - socket_state_t state; - pccard_io_map io_maps[MAX_IO_WIN]; - pccard_mem_map mem_maps[MAX_WIN]; - struct pcmcia_socket socket; -} hs_socket_t; - - - -#define HS_MAX_SOCKETS 2 -static hs_socket_t hs_sockets[HS_MAX_SOCKETS]; - -#define hs_in(sp, r) inb((sp)->ctrl_base + (r)) -#define hs_out(sp, v, r) outb(v, (sp)->ctrl_base + (r)) - - -/* translate a boolean value to a bit in a register */ -#define bool_to_regbit(sp, r, bi, bo) \ - do { \ - unsigned short v = hs_in(sp, r); \ - if (bo) \ - v |= (bi); \ - else \ - v &= ~(bi); \ - hs_out(sp, v, r); \ - } while(0) - -/* register offsets from HD64465_REG_PCC[01]ISR */ -#define ISR 0x0 -#define GCR 0x2 -#define CSCR 0x4 -#define CSCIER 0x6 -#define SCR 0x8 - - -/* Mask and values for CSCIER register */ -#define IER_MASK 0x80 -#define IER_ON 0x3f /* interrupts on */ -#define IER_OFF 0x00 /* interrupts off */ - -/*============================================================*/ - -#if HD64465_DEBUG > 10 - -static void cis_hex_dump(const unsigned char *x, int len) -{ - int i; - - for (i=0 ; i<len ; i++) - { - if (!(i & 0xf)) - printk("\n%08x", (unsigned)(x + i)); - printk(" %02x", *(volatile unsigned short*)x); - x += 2; - } - printk("\n"); -} - -#endif -/*============================================================*/ - -/* - * This code helps create the illusion that the IREQ line from - * the PC card is mapped to one of the CPU's IRQ lines by the - * host bridge hardware (which is how every host bridge *except* - * the HD64465 works). In particular, it supports enabling - * and disabling the IREQ line by code which knows nothing - * about the host bridge (e.g. device drivers, IDE code) using - * the request_irq(), free_irq(), probe_irq_on() and probe_irq_off() - * functions. Also, it supports sharing the mapped IRQ with - * real hardware IRQs from the -IRL0-3 lines. - */ - -#define HS_NUM_MAPPED_IRQS 16 /* Limitation of the PCMCIA code */ -static struct -{ - /* index is mapped irq number */ - hs_socket_t *sock; - hw_irq_controller *old_handler; -} hs_mapped_irq[HS_NUM_MAPPED_IRQS]; - -static void hs_socket_enable_ireq(hs_socket_t *sp) -{ - unsigned short cscier; - - DPRINTK("hs_socket_enable_ireq(sock=%d)\n", sp->number); - - cscier = hs_in(sp, CSCIER); - cscier &= ~HD64465_PCCCSCIER_PIREQE_MASK; - cscier |= HD64465_PCCCSCIER_PIREQE_LEVEL; - hs_out(sp, cscier, CSCIER); -} - -static void hs_socket_disable_ireq(hs_socket_t *sp) -{ - unsigned short cscier; - - DPRINTK("hs_socket_disable_ireq(sock=%d)\n", sp->number); - - cscier = hs_in(sp, CSCIER); - cscier &= ~HD64465_PCCCSCIER_PIREQE_MASK; - hs_out(sp, cscier, CSCIER); -} - -static unsigned int hs_startup_irq(unsigned int irq) -{ - hs_socket_enable_ireq(hs_mapped_irq[irq].sock); - hs_mapped_irq[irq].old_handler->startup(irq); - return 0; -} - -static void hs_shutdown_irq(unsigned int irq) -{ - hs_socket_disable_ireq(hs_mapped_irq[irq].sock); - hs_mapped_irq[irq].old_handler->shutdown(irq); -} - -static void hs_enable_irq(unsigned int irq) -{ - hs_socket_enable_ireq(hs_mapped_irq[irq].sock); - hs_mapped_irq[irq].old_handler->enable(irq); -} - -static void hs_disable_irq(unsigned int irq) -{ - hs_socket_disable_ireq(hs_mapped_irq[irq].sock); - hs_mapped_irq[irq].old_handler->disable(irq); -} - -extern struct hw_interrupt_type no_irq_type; - -static void hs_mask_and_ack_irq(unsigned int irq) -{ - hs_socket_disable_ireq(hs_mapped_irq[irq].sock); - /* ack_none() spuriously complains about an unexpected IRQ */ - if (hs_mapped_irq[irq].old_handler != &no_irq_type) - hs_mapped_irq[irq].old_handler->ack(irq); -} - -static void hs_end_irq(unsigned int irq) -{ - hs_socket_enable_ireq(hs_mapped_irq[irq].sock); - hs_mapped_irq[irq].old_handler->end(irq); -} - - -static struct hw_interrupt_type hd64465_ss_irq_type = { - .typename = "PCMCIA-IRQ", - .startup = hs_startup_irq, - .shutdown = hs_shutdown_irq, - .enable = hs_enable_irq, - .disable = hs_disable_irq, - .ack = hs_mask_and_ack_irq, - .end = hs_end_irq -}; - -/* - * This function should only ever be called with interrupts disabled. - */ -static void hs_map_irq(hs_socket_t *sp, unsigned int irq) -{ - struct irq_desc *desc; - - DPRINTK("hs_map_irq(sock=%d irq=%d)\n", sp->number, irq); - - if (irq >= HS_NUM_MAPPED_IRQS) - return; - - desc = irq_to_desc(irq); - hs_mapped_irq[irq].sock = sp; - /* insert ourselves as the irq controller */ - hs_mapped_irq[irq].old_handler = desc->chip; - desc->chip = &hd64465_ss_irq_type; -} - - -/* - * This function should only ever be called with interrupts disabled. - */ -static void hs_unmap_irq(hs_socket_t *sp, unsigned int irq) -{ - struct irq_desc *desc; - - DPRINTK("hs_unmap_irq(sock=%d irq=%d)\n", sp->number, irq); - - if (irq >= HS_NUM_MAPPED_IRQS) - return; - - desc = irq_to_desc(irq); - /* restore the original irq controller */ - desc->chip = hs_mapped_irq[irq].old_handler; -} - -/*============================================================*/ - - -/* - * Set Vpp and Vcc (in tenths of a Volt). Does not - * support the hi-Z state. - * - * Note, this assumes the board uses a TPS2206 chip to control - * the Vcc and Vpp voltages to the hs_sockets. If your board - * uses the MIC2563 (also supported by the HD64465) then you - * will have to modify this function. - */ - /* 0V 3.3V 5.5V */ -static const u_char hs_tps2206_avcc[3] = { 0x00, 0x04, 0x08 }; -static const u_char hs_tps2206_bvcc[3] = { 0x00, 0x80, 0x40 }; - -static int hs_set_voltages(hs_socket_t *sp, int Vcc, int Vpp) -{ - u_int psr; - u_int vcci = 0; - u_int sock = sp->number; - - DPRINTK("hs_set_voltage(%d, %d, %d)\n", sock, Vcc, Vpp); - - switch (Vcc) - { - case 0: vcci = 0; break; - case 33: vcci = 1; break; - case 50: vcci = 2; break; - default: return 0; - } - - /* Note: Vpp = 120 not supported -- Greg Banks */ - if (Vpp != 0 && Vpp != Vcc) - return 0; - - /* The PSR register holds 8 of the 9 bits which control - * the TPS2206 via its serial interface. - */ - psr = inw(HD64465_REG_PCCPSR); - switch (sock) - { - case 0: - psr &= 0x0f; - psr |= hs_tps2206_avcc[vcci]; - psr |= (Vpp == 0 ? 0x00 : 0x02); - break; - case 1: - psr &= 0xf0; - psr |= hs_tps2206_bvcc[vcci]; - psr |= (Vpp == 0 ? 0x00 : 0x20); - break; - }; - outw(psr, HD64465_REG_PCCPSR); - - return 1; -} - - -/*============================================================*/ - -/* - * Drive the RESET line to the card. - */ -static void hs_reset_socket(hs_socket_t *sp, int on) -{ - unsigned short v; - - v = hs_in(sp, GCR); - if (on) - v |= HD64465_PCCGCR_PCCR; - else - v &= ~HD64465_PCCGCR_PCCR; - hs_out(sp, v, GCR); -} - -/*============================================================*/ - -static int hs_init(struct pcmcia_socket *s) -{ - hs_socket_t *sp = container_of(s, struct hs_socket_t, socket); - - DPRINTK("hs_init(%d)\n", sp->number); - - return 0; -} - -/*============================================================*/ - - -static int hs_get_status(struct pcmcia_socket *s, u_int *value) -{ - hs_socket_t *sp = container_of(s, struct hs_socket_t, socket); - unsigned int isr; - u_int status = 0; - - - isr = hs_in(sp, ISR); - - /* Card is seated and powered when *both* CD pins are low */ - if ((isr & HD64465_PCCISR_PCD_MASK) == 0) - { - status |= SS_DETECT; /* card present */ - - switch (isr & HD64465_PCCISR_PBVD_MASK) - { - case HD64465_PCCISR_PBVD_BATGOOD: - break; - case HD64465_PCCISR_PBVD_BATWARN: - status |= SS_BATWARN; - break; - default: - status |= SS_BATDEAD; - break; - } - - if (isr & HD64465_PCCISR_PREADY) - status |= SS_READY; - - if (isr & HD64465_PCCISR_PMWP) - status |= SS_WRPROT; - - /* Voltage Select pins interpreted as per Table 4-5 of the std. - * Assuming we have the TPS2206, the socket is a "Low Voltage - * key, 3.3V and 5V available, no X.XV available". - */ - switch (isr & (HD64465_PCCISR_PVS2|HD64465_PCCISR_PVS1)) - { - case HD64465_PCCISR_PVS1: - printk(KERN_NOTICE MODNAME ": cannot handle X.XV card, ignored\n"); - status = 0; - break; - case 0: - case HD64465_PCCISR_PVS2: - /* 3.3V */ - status |= SS_3VCARD; - break; - case HD64465_PCCISR_PVS2|HD64465_PCCISR_PVS1: - /* 5V */ - break; - } - - /* TODO: SS_POWERON */ - /* TODO: SS_STSCHG */ - } - - DPRINTK("hs_get_status(%d) = %x\n", sock, status); - - *value = status; - return 0; -} - -/*============================================================*/ - -static int hs_set_socket(struct pcmcia_socket *s, socket_state_t *state) -{ - hs_socket_t *sp = container_of(s, struct hs_socket_t, socket); - u_long flags; - u_int changed; - unsigned short cscier; - - DPRINTK("hs_set_socket(sock=%d, flags=%x, csc_mask=%x, Vcc=%d, Vpp=%d, io_irq=%d)\n", - sock, state->flags, state->csc_mask, state->Vcc, state->Vpp, state->io_irq); - - local_irq_save(flags); /* Don't want interrupts happening here */ - - if (state->Vpp != sp->state.Vpp || - state->Vcc != sp->state.Vcc) { - if (!hs_set_voltages(sp, state->Vcc, state->Vpp)) { - local_irq_restore(flags); - return -EINVAL; - } - } - -/* hd64465_io_debug = 1; */ - /* - * Handle changes in the Card Status Change mask, - * by propagating to the CSCR register - */ - changed = sp->state.csc_mask ^ state->csc_mask; - cscier = hs_in(sp, CSCIER); - - if (changed & SS_DETECT) { - if (state->csc_mask & SS_DETECT) - cscier |= HD64465_PCCCSCIER_PCDE; - else - cscier &= ~HD64465_PCCCSCIER_PCDE; - } - - if (changed & SS_READY) { - if (state->csc_mask & SS_READY) - cscier |= HD64465_PCCCSCIER_PRE; - else - cscier &= ~HD64465_PCCCSCIER_PRE; - } - - if (changed & SS_BATDEAD) { - if (state->csc_mask & SS_BATDEAD) - cscier |= HD64465_PCCCSCIER_PBDE; - else - cscier &= ~HD64465_PCCCSCIER_PBDE; - } - - if (changed & SS_BATWARN) { - if (state->csc_mask & SS_BATWARN) - cscier |= HD64465_PCCCSCIER_PBWE; - else - cscier &= ~HD64465_PCCCSCIER_PBWE; - } - - if (changed & SS_STSCHG) { - if (state->csc_mask & SS_STSCHG) - cscier |= HD64465_PCCCSCIER_PSCE; - else - cscier &= ~HD64465_PCCCSCIER_PSCE; - } - - hs_out(sp, cscier, CSCIER); - - if (sp->state.io_irq && !state->io_irq) - hs_unmap_irq(sp, sp->state.io_irq); - else if (!sp->state.io_irq && state->io_irq) - hs_map_irq(sp, state->io_irq); - - - /* - * Handle changes in the flags field, - * by propagating to config registers. - */ - changed = sp->state.flags ^ state->flags; - - if (changed & SS_IOCARD) { - DPRINTK("card type: %s\n", - (state->flags & SS_IOCARD ? "i/o" : "memory" )); - bool_to_regbit(sp, GCR, HD64465_PCCGCR_PCCT, - state->flags & SS_IOCARD); - } - - if (changed & SS_RESET) { - DPRINTK("%s reset card\n", - (state->flags & SS_RESET ? "start" : "stop")); - bool_to_regbit(sp, GCR, HD64465_PCCGCR_PCCR, - state->flags & SS_RESET); - } - - if (changed & SS_OUTPUT_ENA) { - DPRINTK("%sabling card output\n", - (state->flags & SS_OUTPUT_ENA ? "en" : "dis")); - bool_to_regbit(sp, GCR, HD64465_PCCGCR_PDRV, - state->flags & SS_OUTPUT_ENA); - } - - /* TODO: SS_SPKR_ENA */ - -/* hd64465_io_debug = 0; */ - sp->state = *state; - - local_irq_restore(flags); - -#if HD64465_DEBUG > 10 - if (state->flags & SS_OUTPUT_ENA) - cis_hex_dump((const unsigned char*)sp->mem_base, 0x100); -#endif - return 0; -} - -/*============================================================*/ - -static int hs_set_io_map(struct pcmcia_socket *s, struct pccard_io_map *io) -{ - hs_socket_t *sp = container_of(s, struct hs_socket_t, socket); - int map = io->map; - int sock = sp->number; - struct pccard_io_map *sio; - pgprot_t prot; - - DPRINTK("hs_set_io_map(sock=%d, map=%d, flags=0x%x, speed=%dns, start=%#lx, stop=%#lx)\n", - sock, map, io->flags, io->speed, io->start, io->stop); - if (map >= MAX_IO_WIN) - return -EINVAL; - sio = &sp->io_maps[map]; - - /* check for null changes */ - if (io->flags == sio->flags && - io->start == sio->start && - io->stop == sio->stop) - return 0; - - if (io->flags & MAP_AUTOSZ) - prot = PAGE_KERNEL_PCC(sock, _PAGE_PCC_IODYN); - else if (io->flags & MAP_16BIT) - prot = PAGE_KERNEL_PCC(sock, _PAGE_PCC_IO16); - else - prot = PAGE_KERNEL_PCC(sock, _PAGE_PCC_IO8); - - /* TODO: handle MAP_USE_WAIT */ - if (io->flags & MAP_USE_WAIT) - printk(KERN_INFO MODNAME ": MAP_USE_WAIT unimplemented\n"); - /* TODO: handle MAP_PREFETCH */ - if (io->flags & MAP_PREFETCH) - printk(KERN_INFO MODNAME ": MAP_PREFETCH unimplemented\n"); - /* TODO: handle MAP_WRPROT */ - if (io->flags & MAP_WRPROT) - printk(KERN_INFO MODNAME ": MAP_WRPROT unimplemented\n"); - /* TODO: handle MAP_0WS */ - if (io->flags & MAP_0WS) - printk(KERN_INFO MODNAME ": MAP_0WS unimplemented\n"); - - if (io->flags & MAP_ACTIVE) { - unsigned long pstart, psize, paddrbase; - - paddrbase = virt_to_phys((void*)(sp->mem_base + 2 * HD64465_PCC_WINDOW)); - pstart = io->start & PAGE_MASK; - psize = ((io->stop + PAGE_SIZE) & PAGE_MASK) - pstart; - - /* - * Change PTEs in only that portion of the mapping requested - * by the caller. This means that most of the time, most of - * the PTEs in the io_vma will be unmapped and only the bottom - * page will be mapped. But the code allows for weird cards - * that might want IO ports > 4K. - */ - sp->io_base = p3_ioremap(paddrbase + pstart, psize, pgprot_val(prot)); - - /* - * Change the mapping used by inb() outb() etc - */ - hd64465_port_map(io->start, - io->stop - io->start + 1, - (unsigned long)sp->io_base + io->start, 0); - } else { - hd64465_port_unmap(sio->start, sio->stop - sio->start + 1); - p3_iounmap(sp->io_base); - } - - *sio = *io; - return 0; -} - -/*============================================================*/ - -static int hs_set_mem_map(struct pcmcia_socket *s, struct pccard_mem_map *mem) -{ - hs_socket_t *sp = container_of(s, struct hs_socket_t, socket); - struct pccard_mem_map *smem; - int map = mem->map; - unsigned long paddr; - -#if 0 - DPRINTK("hs_set_mem_map(sock=%d, map=%d, flags=0x%x, card_start=0x%08x)\n", - sock, map, mem->flags, mem->card_start); -#endif - - if (map >= MAX_WIN) - return -EINVAL; - smem = &sp->mem_maps[map]; - - paddr = sp->mem_base; /* base of Attribute mapping */ - if (!(mem->flags & MAP_ATTRIB)) - paddr += HD64465_PCC_WINDOW; /* base of Common mapping */ - paddr += mem->card_start; - - /* Because we specified SS_CAP_STATIC_MAP, we are obliged - * at this time to report the system address corresponding - * to the card address requested. This is how Socket Services - * queries our fixed mapping. I wish this fact had been - * documented - Greg Banks. - */ - mem->static_start = paddr; - - *smem = *mem; - - return 0; -} - -/* TODO: do we need to use the MMU to access Common memory ??? */ - -/*============================================================*/ - -/* - * This function is registered with the HD64465 glue code to do a - * secondary demux step on the PCMCIA interrupts. It handles - * mapping the IREQ request from the card to a standard Linux - * IRQ, as requested by SocketServices. - */ -static int hs_irq_demux(int irq, void *dev) -{ - hs_socket_t *sp = dev; - u_int cscr; - - DPRINTK("hs_irq_demux(irq=%d)\n", irq); - - if (sp->state.io_irq && - (cscr = hs_in(sp, CSCR)) & HD64465_PCCCSCR_PIREQ) { - cscr &= ~HD64465_PCCCSCR_PIREQ; - hs_out(sp, cscr, CSCR); - return sp->state.io_irq; - } - - return irq; -} - -/*============================================================*/ - -/* - * Interrupt handling routine. - */ - -static irqreturn_t hs_interrupt(int irq, void *dev) -{ - hs_socket_t *sp = dev; - u_int events = 0; - u_int cscr; - - cscr = hs_in(sp, CSCR); - - DPRINTK("hs_interrupt, cscr=%04x\n", cscr); - - /* check for bus-related changes to be reported to Socket Services */ - if (cscr & HD64465_PCCCSCR_PCDC) { - /* double-check for a 16-bit card, as we don't support CardBus */ - if ((hs_in(sp, ISR) & HD64465_PCCISR_PCD_MASK) != 0) { - printk(KERN_NOTICE MODNAME - ": socket %d, card not a supported card type or not inserted correctly\n", - sp->number); - /* Don't do the rest unless a card is present */ - cscr &= ~(HD64465_PCCCSCR_PCDC| - HD64465_PCCCSCR_PRC| - HD64465_PCCCSCR_PBW| - HD64465_PCCCSCR_PBD| - HD64465_PCCCSCR_PSC); - } else { - cscr &= ~HD64465_PCCCSCR_PCDC; - events |= SS_DETECT; /* card insertion or removal */ - } - } - if (cscr & HD64465_PCCCSCR_PRC) { - cscr &= ~HD64465_PCCCSCR_PRC; - events |= SS_READY; /* ready signal changed */ - } - if (cscr & HD64465_PCCCSCR_PBW) { - cscr &= ~HD64465_PCCCSCR_PSC; - events |= SS_BATWARN; /* battery warning */ - } - if (cscr & HD64465_PCCCSCR_PBD) { - cscr &= ~HD64465_PCCCSCR_PSC; - events |= SS_BATDEAD; /* battery dead */ - } - if (cscr & HD64465_PCCCSCR_PSC) { - cscr &= ~HD64465_PCCCSCR_PSC; - events |= SS_STSCHG; /* STSCHG (status changed) signal */ - } - - if (cscr & HD64465_PCCCSCR_PIREQ) { - cscr &= ~HD64465_PCCCSCR_PIREQ; - - /* This should have been dealt with during irq demux */ - printk(KERN_NOTICE MODNAME ": unexpected IREQ from card\n"); - } - - hs_out(sp, cscr, CSCR); - - if (events) - pcmcia_parse_events(&sp->socket, events); - - return IRQ_HANDLED; -} - -/*============================================================*/ - -static struct pccard_operations hs_operations = { - .init = hs_init, - .get_status = hs_get_status, - .set_socket = hs_set_socket, - .set_io_map = hs_set_io_map, - .set_mem_map = hs_set_mem_map, -}; - -static int hs_init_socket(hs_socket_t *sp, int irq, unsigned long mem_base, - unsigned int ctrl_base) -{ - unsigned short v; - int i, err; - - memset(sp, 0, sizeof(*sp)); - sp->irq = irq; - sp->mem_base = mem_base; - sp->mem_length = 4*HD64465_PCC_WINDOW; /* 16MB */ - sp->ctrl_base = ctrl_base; - - for (i=0 ; i<MAX_IO_WIN ; i++) - sp->io_maps[i].map = i; - for (i=0 ; i<MAX_WIN ; i++) - sp->mem_maps[i].map = i; - - hd64465_register_irq_demux(sp->irq, hs_irq_demux, sp); - - if ((err = request_irq(sp->irq, hs_interrupt, IRQF_DISABLED, MODNAME, sp)) < 0) - return err; - if (request_mem_region(sp->mem_base, sp->mem_length, MODNAME) == 0) { - sp->mem_base = 0; - return -ENOMEM; - } - - - /* According to section 3.2 of the PCMCIA standard, low-voltage - * capable cards must implement cold insertion, i.e. Vpp and - * Vcc set to 0 before card is inserted. - */ - /*hs_set_voltages(sp, 0, 0);*/ - - /* hi-Z the outputs to the card and set 16MB map mode */ - v = hs_in(sp, GCR); - v &= ~HD64465_PCCGCR_PCCT; /* memory-only card */ - hs_out(sp, v, GCR); - - v = hs_in(sp, GCR); - v |= HD64465_PCCGCR_PDRV; /* enable outputs to card */ - hs_out(sp, v, GCR); - - v = hs_in(sp, GCR); - v |= HD64465_PCCGCR_PMMOD; /* 16MB mapping mode */ - hs_out(sp, v, GCR); - - v = hs_in(sp, GCR); - /* lowest 16MB of Common */ - v &= ~(HD64465_PCCGCR_PPA25|HD64465_PCCGCR_PPA24); - hs_out(sp, v, GCR); - - hs_reset_socket(sp, 1); - - printk(KERN_INFO "HD64465 PCMCIA bridge socket %d at 0x%08lx irq %d\n", - i, sp->mem_base, sp->irq); - - return 0; -} - -static void hs_exit_socket(hs_socket_t *sp) -{ - unsigned short cscier, gcr; - unsigned long flags; - - local_irq_save(flags); - - /* turn off interrupts in hardware */ - cscier = hs_in(sp, CSCIER); - cscier = (cscier & IER_MASK) | IER_OFF; - hs_out(sp, cscier, CSCIER); - - /* hi-Z the outputs to the card */ - gcr = hs_in(sp, GCR); - gcr &= HD64465_PCCGCR_PDRV; - hs_out(sp, gcr, GCR); - - /* power the card down */ - hs_set_voltages(sp, 0, 0); - - if (sp->mem_base != 0) - release_mem_region(sp->mem_base, sp->mem_length); - if (sp->irq != 0) { - free_irq(sp->irq, hs_interrupt); - hd64465_unregister_irq_demux(sp->irq); - } - - local_irq_restore(flags); -} - -static struct device_driver hd64465_driver = { - .name = "hd64465-pcmcia", - .bus = &platform_bus_type, - .suspend = pcmcia_socket_dev_suspend, - .resume = pcmcia_socket_dev_resume, -}; - -static struct platform_device hd64465_device = { - .name = "hd64465-pcmcia", - .id = 0, -}; - -static int __init init_hs(void) -{ - int i; - unsigned short v; - -/* hd64465_io_debug = 1; */ - if (driver_register(&hd64465_driver)) - return -EINVAL; - - /* Wake both sockets out of STANDBY mode */ - /* TODO: wait 15ms */ - v = inw(HD64465_REG_SMSCR); - v &= ~(HD64465_SMSCR_PC0ST|HD64465_SMSCR_PC1ST); - outw(v, HD64465_REG_SMSCR); - - /* keep power controller out of shutdown mode */ - v = inb(HD64465_REG_PCC0SCR); - v |= HD64465_PCCSCR_SHDN; - outb(v, HD64465_REG_PCC0SCR); - - /* use serial (TPS2206) power controller */ - v = inb(HD64465_REG_PCC0CSCR); - v |= HD64465_PCCCSCR_PSWSEL; - outb(v, HD64465_REG_PCC0CSCR); - - /* - * Setup hs_sockets[] structures and request system resources. - * TODO: on memory allocation failure, power down the socket - * before quitting. - */ - for (i=0; i<HS_MAX_SOCKETS; i++) { - hs_set_voltages(&hs_sockets[i], 0, 0); - - hs_sockets[i].socket.features |= SS_CAP_PCCARD | SS_CAP_STATIC_MAP; /* mappings are fixed in host memory */ - hs_sockets[i].socket.resource_ops = &pccard_static_ops; - hs_sockets[i].socket.irq_mask = 0xffde;/*0xffff*/ /* IRQs mapped in s/w so can do any, really */ - hs_sockets[i].socket.map_size = HD64465_PCC_WINDOW; /* 16MB fixed window size */ - - hs_sockets[i].socket.owner = THIS_MODULE; - hs_sockets[i].socket.ss_entry = &hs_operations; - } - - i = hs_init_socket(&hs_sockets[0], - HD64465_IRQ_PCMCIA0, - HD64465_PCC0_BASE, - HD64465_REG_PCC0ISR); - if (i < 0) { - unregister_driver(&hd64465_driver); - return i; - } - i = hs_init_socket(&hs_sockets[1], - HD64465_IRQ_PCMCIA1, - HD64465_PCC1_BASE, - HD64465_REG_PCC1ISR); - if (i < 0) { - unregister_driver(&hd64465_driver); - return i; - } - -/* hd64465_io_debug = 0; */ - - platform_device_register(&hd64465_device); - - for (i=0; i<HS_MAX_SOCKETS; i++) { - unsigned int ret; - hs_sockets[i].socket.dev.parent = &hd64465_device.dev; - hs_sockets[i].number = i; - ret = pcmcia_register_socket(&hs_sockets[i].socket); - if (ret && i) - pcmcia_unregister_socket(&hs_sockets[0].socket); - } - - return 0; -} - -static void __exit exit_hs(void) -{ - int i; - - for (i=0 ; i<HS_MAX_SOCKETS ; i++) { - pcmcia_unregister_socket(&hs_sockets[i].socket); - hs_exit_socket(&hs_sockets[i]); - } - - platform_device_unregister(&hd64465_device); - unregister_driver(&hd64465_driver); -} - -module_init(init_hs); -module_exit(exit_hs); - -/*============================================================*/ -/*END*/ diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c index afea2b2558b..76d4a98f095 100644 --- a/drivers/pcmcia/pcmcia_resource.c +++ b/drivers/pcmcia/pcmcia_resource.c @@ -693,8 +693,9 @@ int pcmcia_request_irq(struct pcmcia_device *p_dev, irq_req_t *req) type = 0; if (s->functions > 1) /* All of this ought to be handled higher up */ type = IRQF_SHARED; - if (req->Attributes & IRQ_TYPE_DYNAMIC_SHARING) + else if (req->Attributes & IRQ_TYPE_DYNAMIC_SHARING) type = IRQF_SHARED; + else printk(KERN_WARNING "pcmcia: Driver needs updating to support IRQ sharing.\n"); #ifdef CONFIG_PCMCIA_PROBE diff --git a/drivers/pnp/interface.c b/drivers/pnp/interface.c index 478a4a739c0..c3f1c8e9d25 100644 --- a/drivers/pnp/interface.c +++ b/drivers/pnp/interface.c @@ -12,7 +12,6 @@ #include <linux/errno.h> #include <linux/list.h> #include <linux/types.h> -#include <linux/pnp.h> #include <linux/stat.h> #include <linux/ctype.h> #include <linux/slab.h> diff --git a/drivers/ps3/ps3-lpm.c b/drivers/ps3/ps3-lpm.c index 85edf945ab8..204158cf7a5 100644 --- a/drivers/ps3/ps3-lpm.c +++ b/drivers/ps3/ps3-lpm.c @@ -22,6 +22,7 @@ #include <linux/module.h> #include <linux/interrupt.h> #include <linux/uaccess.h> +#include <asm/smp.h> #include <asm/time.h> #include <asm/ps3.h> #include <asm/lv1call.h> diff --git a/drivers/regulator/da903x.c b/drivers/regulator/da903x.c index 3688e339db8..773b29cec8b 100644 --- a/drivers/regulator/da903x.c +++ b/drivers/regulator/da903x.c @@ -79,6 +79,11 @@ struct da903x_regulator_info { int enable_bit; }; +static inline struct device *to_da903x_dev(struct regulator_dev *rdev) +{ + return rdev_get_dev(rdev)->parent->parent; +} + static inline int check_range(struct da903x_regulator_info *info, int min_uV, int max_uV) { @@ -93,7 +98,7 @@ static int da903x_set_ldo_voltage(struct regulator_dev *rdev, int min_uV, int max_uV) { struct da903x_regulator_info *info = rdev_get_drvdata(rdev); - struct device *da9034_dev = rdev_get_dev(rdev)->parent; + struct device *da9034_dev = to_da903x_dev(rdev); uint8_t val, mask; if (check_range(info, min_uV, max_uV)) { @@ -111,7 +116,7 @@ static int da903x_set_ldo_voltage(struct regulator_dev *rdev, static int da903x_get_voltage(struct regulator_dev *rdev) { struct da903x_regulator_info *info = rdev_get_drvdata(rdev); - struct device *da9034_dev = rdev_get_dev(rdev)->parent; + struct device *da9034_dev = to_da903x_dev(rdev); uint8_t val, mask; int ret; @@ -128,7 +133,7 @@ static int da903x_get_voltage(struct regulator_dev *rdev) static int da903x_enable(struct regulator_dev *rdev) { struct da903x_regulator_info *info = rdev_get_drvdata(rdev); - struct device *da9034_dev = rdev_get_dev(rdev)->parent; + struct device *da9034_dev = to_da903x_dev(rdev); return da903x_set_bits(da9034_dev, info->enable_reg, 1 << info->enable_bit); @@ -137,7 +142,7 @@ static int da903x_enable(struct regulator_dev *rdev) static int da903x_disable(struct regulator_dev *rdev) { struct da903x_regulator_info *info = rdev_get_drvdata(rdev); - struct device *da9034_dev = rdev_get_dev(rdev)->parent; + struct device *da9034_dev = to_da903x_dev(rdev); return da903x_clr_bits(da9034_dev, info->enable_reg, 1 << info->enable_bit); @@ -146,7 +151,7 @@ static int da903x_disable(struct regulator_dev *rdev) static int da903x_is_enabled(struct regulator_dev *rdev) { struct da903x_regulator_info *info = rdev_get_drvdata(rdev); - struct device *da9034_dev = rdev_get_dev(rdev)->parent; + struct device *da9034_dev = to_da903x_dev(rdev); uint8_t reg_val; int ret; @@ -162,7 +167,7 @@ static int da9030_set_ldo1_15_voltage(struct regulator_dev *rdev, int min_uV, int max_uV) { struct da903x_regulator_info *info = rdev_get_drvdata(rdev); - struct device *da903x_dev = rdev_get_dev(rdev)->parent; + struct device *da903x_dev = to_da903x_dev(rdev); uint8_t val, mask; int ret; @@ -189,7 +194,7 @@ static int da9030_set_ldo14_voltage(struct regulator_dev *rdev, int min_uV, int max_uV) { struct da903x_regulator_info *info = rdev_get_drvdata(rdev); - struct device *da903x_dev = rdev_get_dev(rdev)->parent; + struct device *da903x_dev = to_da903x_dev(rdev); uint8_t val, mask; int thresh; @@ -215,7 +220,7 @@ static int da9030_set_ldo14_voltage(struct regulator_dev *rdev, static int da9030_get_ldo14_voltage(struct regulator_dev *rdev) { struct da903x_regulator_info *info = rdev_get_drvdata(rdev); - struct device *da903x_dev = rdev_get_dev(rdev)->parent; + struct device *da903x_dev = to_da903x_dev(rdev); uint8_t val, mask; int ret; @@ -238,7 +243,7 @@ static int da9034_set_dvc_voltage(struct regulator_dev *rdev, int min_uV, int max_uV) { struct da903x_regulator_info *info = rdev_get_drvdata(rdev); - struct device *da9034_dev = rdev_get_dev(rdev)->parent; + struct device *da9034_dev = to_da903x_dev(rdev); uint8_t val, mask; int ret; @@ -264,7 +269,7 @@ static int da9034_set_ldo12_voltage(struct regulator_dev *rdev, int min_uV, int max_uV) { struct da903x_regulator_info *info = rdev_get_drvdata(rdev); - struct device *da9034_dev = rdev_get_dev(rdev)->parent; + struct device *da9034_dev = to_da903x_dev(rdev); uint8_t val, mask; if (check_range(info, min_uV, max_uV)) { @@ -283,7 +288,7 @@ static int da9034_set_ldo12_voltage(struct regulator_dev *rdev, static int da9034_get_ldo12_voltage(struct regulator_dev *rdev) { struct da903x_regulator_info *info = rdev_get_drvdata(rdev); - struct device *da9034_dev = rdev_get_dev(rdev)->parent; + struct device *da9034_dev = to_da903x_dev(rdev); uint8_t val, mask; int ret; @@ -466,7 +471,7 @@ static int __devinit da903x_regulator_probe(struct platform_device *pdev) if (ri->desc.id == DA9030_ID_LDO1 || ri->desc.id == DA9030_ID_LDO15) ri->desc.ops = &da9030_regulator_ldo1_15_ops; - rdev = regulator_register(&ri->desc, pdev->dev.parent, ri); + rdev = regulator_register(&ri->desc, &pdev->dev, ri); if (IS_ERR(rdev)) { dev_err(&pdev->dev, "failed to register regulator %s\n", ri->desc.name); diff --git a/drivers/rtc/interface.c b/drivers/rtc/interface.c index 7af60b98d8a..a04c1b6b157 100644 --- a/drivers/rtc/interface.c +++ b/drivers/rtc/interface.c @@ -271,7 +271,7 @@ int rtc_read_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm) dev_dbg(&rtc->dev, "alarm rollover: %s\n", "year"); do { alarm->time.tm_year++; - } while (!rtc_valid_tm(&alarm->time)); + } while (rtc_valid_tm(&alarm->time) != 0); break; default: diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c index 5549231179a..6cf8e282338 100644 --- a/drivers/rtc/rtc-cmos.c +++ b/drivers/rtc/rtc-cmos.c @@ -794,7 +794,7 @@ cmos_do_probe(struct device *dev, struct resource *ports, int rtc_irq) goto cleanup2; } - pr_info("%s: alarms up to one %s%s, %zd bytes nvram, %s irqs\n", + pr_info("%s: alarms up to one %s%s, %zd bytes nvram%s\n", cmos_rtc.rtc->dev.bus_id, is_valid_irq(rtc_irq) ? (cmos_rtc.mon_alrm diff --git a/drivers/rtc/rtc-dev.c b/drivers/rtc/rtc-dev.c index 079e9ed907e..ecdea44ae4e 100644 --- a/drivers/rtc/rtc-dev.c +++ b/drivers/rtc/rtc-dev.c @@ -446,9 +446,6 @@ static int rtc_dev_release(struct inode *inode, struct file *file) if (rtc->ops->release) rtc->ops->release(rtc->dev.parent); - if (file->f_flags & FASYNC) - rtc_dev_fasync(-1, file, 0); - clear_bit_unlock(RTC_DEV_BUSY, &rtc->flags); return 0; } diff --git a/drivers/rtc/rtc-ds3234.c b/drivers/rtc/rtc-ds3234.c index 37d131d03f3..45e5b106af7 100644 --- a/drivers/rtc/rtc-ds3234.c +++ b/drivers/rtc/rtc-ds3234.c @@ -189,7 +189,7 @@ static const struct rtc_class_ops ds3234_rtc_ops = { .set_time = ds3234_set_time, }; -static int ds3234_probe(struct spi_device *spi) +static int __devinit ds3234_probe(struct spi_device *spi) { struct rtc_device *rtc; unsigned char tmp; @@ -249,7 +249,7 @@ static int ds3234_probe(struct spi_device *spi) return 0; } -static int __exit ds3234_remove(struct spi_device *spi) +static int __devexit ds3234_remove(struct spi_device *spi) { struct ds3234 *chip = platform_get_drvdata(spi); struct rtc_device *rtc = chip->rtc; diff --git a/drivers/rtc/rtc-m48t59.c b/drivers/rtc/rtc-m48t59.c index 04b63dab693..43afb7ab528 100644 --- a/drivers/rtc/rtc-m48t59.c +++ b/drivers/rtc/rtc-m48t59.c @@ -87,6 +87,10 @@ static int m48t59_rtc_read_time(struct device *dev, struct rtc_time *tm) dev_dbg(dev, "Century bit is enabled\n"); tm->tm_year += 100; /* one century */ } +#ifdef CONFIG_SPARC + /* Sun SPARC machines count years since 1968 */ + tm->tm_year += 68; +#endif tm->tm_wday = bcd2bin(val & 0x07); tm->tm_hour = bcd2bin(M48T59_READ(M48T59_HOUR) & 0x3F); @@ -110,11 +114,20 @@ static int m48t59_rtc_set_time(struct device *dev, struct rtc_time *tm) struct m48t59_private *m48t59 = platform_get_drvdata(pdev); unsigned long flags; u8 val = 0; + int year = tm->tm_year; + +#ifdef CONFIG_SPARC + /* Sun SPARC machines count years since 1968 */ + year -= 68; +#endif dev_dbg(dev, "RTC set time %04d-%02d-%02d %02d/%02d/%02d\n", - tm->tm_year + 1900, tm->tm_mon, tm->tm_mday, + year + 1900, tm->tm_mon, tm->tm_mday, tm->tm_hour, tm->tm_min, tm->tm_sec); + if (year < 0) + return -EINVAL; + spin_lock_irqsave(&m48t59->lock, flags); /* Issue the WRITE command */ M48T59_SET_BITS(M48T59_CNTL_WRITE, M48T59_CNTL); @@ -125,9 +138,9 @@ static int m48t59_rtc_set_time(struct device *dev, struct rtc_time *tm) M48T59_WRITE((bin2bcd(tm->tm_mday) & 0x3F), M48T59_MDAY); /* tm_mon is 0-11 */ M48T59_WRITE((bin2bcd(tm->tm_mon + 1) & 0x1F), M48T59_MONTH); - M48T59_WRITE(bin2bcd(tm->tm_year % 100), M48T59_YEAR); + M48T59_WRITE(bin2bcd(year % 100), M48T59_YEAR); - if (pdata->type == M48T59RTC_TYPE_M48T59 && (tm->tm_year / 100)) + if (pdata->type == M48T59RTC_TYPE_M48T59 && (year / 100)) val = (M48T59_WDAY_CEB | M48T59_WDAY_CB); val |= (bin2bcd(tm->tm_wday) & 0x07); M48T59_WRITE(val, M48T59_WDAY); @@ -159,6 +172,10 @@ static int m48t59_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm) M48T59_SET_BITS(M48T59_CNTL_READ, M48T59_CNTL); tm->tm_year = bcd2bin(M48T59_READ(M48T59_YEAR)); +#ifdef CONFIG_SPARC + /* Sun SPARC machines count years since 1968 */ + tm->tm_year += 68; +#endif /* tm_mon is 0-11 */ tm->tm_mon = bcd2bin(M48T59_READ(M48T59_MONTH)) - 1; @@ -192,11 +209,20 @@ static int m48t59_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm) struct rtc_time *tm = &alrm->time; u8 mday, hour, min, sec; unsigned long flags; + int year = tm->tm_year; + +#ifdef CONFIG_SPARC + /* Sun SPARC machines count years since 1968 */ + year -= 68; +#endif /* If no irq, we don't support ALARM */ if (m48t59->irq == NO_IRQ) return -EIO; + if (year < 0) + return -EINVAL; + /* * 0xff means "always match" */ @@ -228,7 +254,7 @@ static int m48t59_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm) spin_unlock_irqrestore(&m48t59->lock, flags); dev_dbg(dev, "RTC set alarm time %04d-%02d-%02d %02d/%02d/%02d\n", - tm->tm_year + 1900, tm->tm_mon, tm->tm_mday, + year + 1900, tm->tm_mon, tm->tm_mday, tm->tm_hour, tm->tm_min, tm->tm_sec); return 0; } diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c index 910bc704939..f59277bbeda 100644 --- a/drivers/rtc/rtc-s3c.c +++ b/drivers/rtc/rtc-s3c.c @@ -455,6 +455,8 @@ static int __devinit s3c_rtc_probe(struct platform_device *pdev) s3c_rtc_setfreq(&pdev->dev, 1); + device_init_wakeup(&pdev->dev, 1); + /* register RTC and exit */ rtc = rtc_device_register("s3c", &pdev->dev, &s3c_rtcops, @@ -507,7 +509,7 @@ static int s3c_rtc_resume(struct platform_device *pdev) #define s3c_rtc_resume NULL #endif -static struct platform_driver s3c2410_rtcdrv = { +static struct platform_driver s3c2410_rtc_driver = { .probe = s3c_rtc_probe, .remove = __devexit_p(s3c_rtc_remove), .suspend = s3c_rtc_suspend, @@ -523,12 +525,12 @@ static char __initdata banner[] = "S3C24XX RTC, (c) 2004,2006 Simtec Electronics static int __init s3c_rtc_init(void) { printk(banner); - return platform_driver_register(&s3c2410_rtcdrv); + return platform_driver_register(&s3c2410_rtc_driver); } static void __exit s3c_rtc_exit(void) { - platform_driver_unregister(&s3c2410_rtcdrv); + platform_driver_unregister(&s3c2410_rtc_driver); } module_init(s3c_rtc_init); diff --git a/drivers/s390/char/tape_block.c b/drivers/s390/char/tape_block.c index 023803dbb0c..ae18baf59f0 100644 --- a/drivers/s390/char/tape_block.c +++ b/drivers/s390/char/tape_block.c @@ -76,7 +76,7 @@ tapeblock_trigger_requeue(struct tape_device *device) static void tapeblock_end_request(struct request *req, int error) { - if (__blk_end_request(req, error, blk_rq_bytes(req))) + if (blk_end_request(req, error, blk_rq_bytes(req))) BUG(); } @@ -166,7 +166,7 @@ tapeblock_requeue(struct work_struct *work) { nr_queued++; spin_unlock(get_ccwdev_lock(device->cdev)); - spin_lock(&device->blk_data.request_queue_lock); + spin_lock_irq(&device->blk_data.request_queue_lock); while ( !blk_queue_plugged(queue) && elv_next_request(queue) && @@ -176,7 +176,9 @@ tapeblock_requeue(struct work_struct *work) { if (rq_data_dir(req) == WRITE) { DBF_EVENT(1, "TBLOCK: Rejecting write request\n"); blkdev_dequeue_request(req); + spin_unlock_irq(&device->blk_data.request_queue_lock); tapeblock_end_request(req, -EIO); + spin_lock_irq(&device->blk_data.request_queue_lock); continue; } blkdev_dequeue_request(req); diff --git a/drivers/s390/char/tape_core.c b/drivers/s390/char/tape_core.c index d7073dbf825..f9bb51fa7f5 100644 --- a/drivers/s390/char/tape_core.c +++ b/drivers/s390/char/tape_core.c @@ -1200,7 +1200,7 @@ tape_open(struct tape_device *device) { int rc; - spin_lock(get_ccwdev_lock(device->cdev)); + spin_lock_irq(get_ccwdev_lock(device->cdev)); if (device->tape_state == TS_NOT_OPER) { DBF_EVENT(6, "TAPE:nodev\n"); rc = -ENODEV; @@ -1218,7 +1218,7 @@ tape_open(struct tape_device *device) tape_state_set(device, TS_IN_USE); rc = 0; } - spin_unlock(get_ccwdev_lock(device->cdev)); + spin_unlock_irq(get_ccwdev_lock(device->cdev)); return rc; } @@ -1228,11 +1228,11 @@ tape_open(struct tape_device *device) int tape_release(struct tape_device *device) { - spin_lock(get_ccwdev_lock(device->cdev)); + spin_lock_irq(get_ccwdev_lock(device->cdev)); if (device->tape_state == TS_IN_USE) tape_state_set(device, TS_UNUSED); module_put(device->discipline->owner); - spin_unlock(get_ccwdev_lock(device->cdev)); + spin_unlock_irq(get_ccwdev_lock(device->cdev)); return 0; } diff --git a/drivers/s390/cio/qdio_debug.c b/drivers/s390/cio/qdio_debug.c index b5390821434..f05590355be 100644 --- a/drivers/s390/cio/qdio_debug.c +++ b/drivers/s390/cio/qdio_debug.c @@ -20,6 +20,7 @@ static struct dentry *debugfs_root; #define MAX_DEBUGFS_QUEUES 32 static struct dentry *debugfs_queues[MAX_DEBUGFS_QUEUES] = { NULL }; static DEFINE_MUTEX(debugfs_mutex); +#define QDIO_DEBUGFS_NAME_LEN 40 void qdio_allocate_do_dbf(struct qdio_initialize *init_data) { @@ -152,17 +153,6 @@ static int qstat_seq_open(struct inode *inode, struct file *filp) filp->f_path.dentry->d_inode->i_private); } -static void get_queue_name(struct qdio_q *q, struct ccw_device *cdev, char *name) -{ - memset(name, 0, sizeof(name)); - sprintf(name, "%s", dev_name(&cdev->dev)); - if (q->is_input_q) - sprintf(name + strlen(name), "_input"); - else - sprintf(name + strlen(name), "_output"); - sprintf(name + strlen(name), "_%d", q->nr); -} - static void remove_debugfs_entry(struct qdio_q *q) { int i; @@ -189,14 +179,17 @@ static struct file_operations debugfs_fops = { static void setup_debugfs_entry(struct qdio_q *q, struct ccw_device *cdev) { int i = 0; - char name[40]; + char name[QDIO_DEBUGFS_NAME_LEN]; while (debugfs_queues[i] != NULL) { i++; if (i >= MAX_DEBUGFS_QUEUES) return; } - get_queue_name(q, cdev, name); + snprintf(name, QDIO_DEBUGFS_NAME_LEN, "%s_%s_%d", + dev_name(&cdev->dev), + q->is_input_q ? "input" : "output", + q->nr); debugfs_queues[i] = debugfs_create_file(name, S_IFREG | S_IRUGO | S_IWUSR, debugfs_root, q, &debugfs_fops); } diff --git a/drivers/s390/cio/qdio_main.c b/drivers/s390/cio/qdio_main.c index a50682d2a0f..7c865915199 100644 --- a/drivers/s390/cio/qdio_main.c +++ b/drivers/s390/cio/qdio_main.c @@ -1083,7 +1083,6 @@ void qdio_int_handler(struct ccw_device *cdev, unsigned long intparm, case -EIO: sprintf(dbf_text, "ierr%4x", irq_ptr->schid.sch_no); QDIO_DBF_TEXT2(1, setup, dbf_text); - qdio_int_error(cdev); return; case -ETIMEDOUT: sprintf(dbf_text, "qtoh%4x", irq_ptr->schid.sch_no); diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index 7de410d5be4..52d26592c72 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -3025,7 +3025,7 @@ static inline void __qeth_fill_buffer(struct sk_buff *skb, struct qdio_buffer *buffer, int is_tso, int *next_element_to_fill, int offset) { - int length = skb->len - offset; + int length = skb->len; int length_here; int element; char *data; @@ -3037,6 +3037,7 @@ static inline void __qeth_fill_buffer(struct sk_buff *skb, if (offset >= 0) { data = skb->data + offset; + length -= offset; first_lap = 0; } diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c index 955ba7a31b9..1b1e80336d2 100644 --- a/drivers/s390/net/qeth_l2_main.c +++ b/drivers/s390/net/qeth_l2_main.c @@ -373,8 +373,6 @@ static int qeth_l2_stop_card(struct qeth_card *card, int recovery_mode) QETH_DBF_HEX(SETUP, 2, &card, sizeof(void *)); qeth_set_allowed_threads(card, 0, 1); - if (qeth_wait_for_threads(card, ~QETH_RECOVER_THREAD)) - return -ERESTARTSYS; if (card->read.state == CH_STATE_UP && card->write.state == CH_STATE_UP && (card->state == CARD_STATE_UP)) { @@ -451,12 +449,15 @@ static void qeth_l2_process_inbound_buffer(struct qeth_card *card, netif_rx(skb); break; case QETH_HEADER_TYPE_OSN: - skb_push(skb, sizeof(struct qeth_hdr)); - skb_copy_to_linear_data(skb, hdr, + if (card->info.type == QETH_CARD_TYPE_OSN) { + skb_push(skb, sizeof(struct qeth_hdr)); + skb_copy_to_linear_data(skb, hdr, sizeof(struct qeth_hdr)); - len = skb->len; - card->osn_info.data_cb(skb); - break; + len = skb->len; + card->osn_info.data_cb(skb); + break; + } + /* else unknown */ default: dev_kfree_skb_any(skb); QETH_DBF_TEXT(TRACE, 3, "inbunkno"); @@ -975,12 +976,6 @@ static int __qeth_l2_set_online(struct ccwgroup_device *gdev, int recovery_mode) QETH_DBF_HEX(SETUP, 2, &card, sizeof(void *)); qeth_set_allowed_threads(card, QETH_RECOVER_THREAD, 1); - if (qeth_wait_for_threads(card, ~QETH_RECOVER_THREAD)) { - PRINT_WARN("set_online of card %s interrupted by user!\n", - CARD_BUS_ID(card)); - return -ERESTARTSYS; - } - recover_flag = card->state; rc = ccw_device_set_online(CARD_RDEV(card)); if (rc) { @@ -1091,11 +1086,7 @@ static int __qeth_l2_set_offline(struct ccwgroup_device *cgdev, if (card->dev && netif_carrier_ok(card->dev)) netif_carrier_off(card->dev); recover_flag = card->state; - if (qeth_l2_stop_card(card, recovery_mode) == -ERESTARTSYS) { - PRINT_WARN("Stopping card %s interrupted by user!\n", - CARD_BUS_ID(card)); - return -ERESTARTSYS; - } + qeth_l2_stop_card(card, recovery_mode); rc = ccw_device_set_offline(CARD_DDEV(card)); rc2 = ccw_device_set_offline(CARD_WDEV(card)); rc3 = ccw_device_set_offline(CARD_RDEV(card)); diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c index 99547dea44d..ed59fedd592 100644 --- a/drivers/s390/net/qeth_l3_main.c +++ b/drivers/s390/net/qeth_l3_main.c @@ -2064,8 +2064,6 @@ static int qeth_l3_stop_card(struct qeth_card *card, int recovery_mode) QETH_DBF_HEX(SETUP, 2, &card, sizeof(void *)); qeth_set_allowed_threads(card, 0, 1); - if (qeth_wait_for_threads(card, ~QETH_RECOVER_THREAD)) - return -ERESTARTSYS; if (card->read.state == CH_STATE_UP && card->write.state == CH_STATE_UP && (card->state == CARD_STATE_UP)) { @@ -3049,11 +3047,6 @@ static int __qeth_l3_set_online(struct ccwgroup_device *gdev, int recovery_mode) QETH_DBF_HEX(SETUP, 2, &card, sizeof(void *)); qeth_set_allowed_threads(card, QETH_RECOVER_THREAD, 1); - if (qeth_wait_for_threads(card, ~QETH_RECOVER_THREAD)) { - PRINT_WARN("set_online of card %s interrupted by user!\n", - CARD_BUS_ID(card)); - return -ERESTARTSYS; - } recover_flag = card->state; rc = ccw_device_set_online(CARD_RDEV(card)); @@ -3170,11 +3163,7 @@ static int __qeth_l3_set_offline(struct ccwgroup_device *cgdev, if (card->dev && netif_carrier_ok(card->dev)) netif_carrier_off(card->dev); recover_flag = card->state; - if (qeth_l3_stop_card(card, recovery_mode) == -ERESTARTSYS) { - PRINT_WARN("Stopping card %s interrupted by user!\n", - CARD_BUS_ID(card)); - return -ERESTARTSYS; - } + qeth_l3_stop_card(card, recovery_mode); rc = ccw_device_set_offline(CARD_DDEV(card)); rc2 = ccw_device_set_offline(CARD_WDEV(card)); rc3 = ccw_device_set_offline(CARD_RDEV(card)); diff --git a/drivers/s390/net/qeth_l3_sys.c b/drivers/s390/net/qeth_l3_sys.c index 210ddb63974..c144b9924d5 100644 --- a/drivers/s390/net/qeth_l3_sys.c +++ b/drivers/s390/net/qeth_l3_sys.c @@ -121,9 +121,6 @@ static ssize_t qeth_l3_dev_route6_show(struct device *dev, if (!card) return -EINVAL; - if (!qeth_is_supported(card, IPA_IPV6)) - return sprintf(buf, "%s\n", "n/a"); - return qeth_l3_dev_route_show(card, &card->options.route6, buf); } @@ -135,10 +132,6 @@ static ssize_t qeth_l3_dev_route6_store(struct device *dev, if (!card) return -EINVAL; - if (!qeth_is_supported(card, IPA_IPV6)) { - return -EOPNOTSUPP; - } - return qeth_l3_dev_route_store(card, &card->options.route6, QETH_PROT_IPV6, buf, count); } diff --git a/drivers/sbus/char/jsflash.c b/drivers/sbus/char/jsflash.c index 2bec9ccc029..a9a9893a5f9 100644 --- a/drivers/sbus/char/jsflash.c +++ b/drivers/sbus/char/jsflash.c @@ -36,7 +36,6 @@ #include <linux/poll.h> #include <linux/init.h> #include <linux/string.h> -#include <linux/smp_lock.h> #include <linux/genhd.h> #include <linux/blkdev.h> diff --git a/drivers/scsi/fdomain.c b/drivers/scsi/fdomain.c index c33bcb284df..56f4e6bffc2 100644 --- a/drivers/scsi/fdomain.c +++ b/drivers/scsi/fdomain.c @@ -290,9 +290,11 @@ #include <scsi/scsi_ioctl.h> #include "fdomain.h" +#ifndef PCMCIA MODULE_AUTHOR("Rickard E. Faith"); MODULE_DESCRIPTION("Future domain SCSI driver"); MODULE_LICENSE("GPL"); +#endif #define VERSION "$Revision: 5.51 $" diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas.c index afe1de99876..a454f94623d 100644 --- a/drivers/scsi/megaraid/megaraid_sas.c +++ b/drivers/scsi/megaraid/megaraid_sas.c @@ -2988,17 +2988,6 @@ static int megasas_mgmt_open(struct inode *inode, struct file *filep) } /** - * megasas_mgmt_release - char node "release" entry point - */ -static int megasas_mgmt_release(struct inode *inode, struct file *filep) -{ - filep->private_data = NULL; - fasync_helper(-1, filep, 0, &megasas_async_queue); - - return 0; -} - -/** * megasas_mgmt_fasync - Async notifier registration from applications * * This function adds the calling process to a driver global queue. When an @@ -3345,7 +3334,6 @@ megasas_mgmt_compat_ioctl(struct file *file, unsigned int cmd, static const struct file_operations megasas_mgmt_fops = { .owner = THIS_MODULE, .open = megasas_mgmt_open, - .release = megasas_mgmt_release, .fasync = megasas_mgmt_fasync, .unlocked_ioctl = megasas_mgmt_ioctl, #ifdef CONFIG_COMPAT diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c index 9adf35bd8b5..5103855242a 100644 --- a/drivers/scsi/sg.c +++ b/drivers/scsi/sg.c @@ -327,7 +327,6 @@ sg_release(struct inode *inode, struct file *filp) if ((!(sfp = (Sg_fd *) filp->private_data)) || (!(sdp = sfp->parentdp))) return -ENXIO; SCSI_LOG_TIMEOUT(3, printk("sg_release: %s\n", sdp->disk->disk_name)); - sg_fasync(-1, filp, 0); /* remove filp from async notification list */ if (0 == sg_remove_sfp(sdp, sfp)) { /* Returns 1 when sdp gone */ if (!sdp->detached) { scsi_device_put(sdp->device); diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index c94d3c4b752..579d63a81aa 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -1276,7 +1276,7 @@ config SERIAL_SGI_IOC3 say Y or M. Otherwise, say N. config SERIAL_NETX - bool "NetX serial port support" + tristate "NetX serial port support" depends on ARM && ARCH_NETX select SERIAL_CORE help @@ -1288,7 +1288,7 @@ config SERIAL_NETX config SERIAL_NETX_CONSOLE bool "Console on NetX serial port" - depends on SERIAL_NETX + depends on SERIAL_NETX=y select SERIAL_CORE_CONSOLE help If you have enabled the serial port on the Hilscher NetX SoC diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c index 61fb8b6d19a..d5efd6c7790 100644 --- a/drivers/serial/atmel_serial.c +++ b/drivers/serial/atmel_serial.c @@ -1258,6 +1258,8 @@ static void __devinit atmel_init_port(struct atmel_uart_port *atmel_port, atmel_port->clk = clk_get(&pdev->dev, "usart"); clk_enable(atmel_port->clk); port->uartclk = clk_get_rate(atmel_port->clk); + clk_disable(atmel_port->clk); + /* only enable clock when USART is in use */ } atmel_port->use_dma_rx = data->use_dma_rx; @@ -1379,6 +1381,8 @@ static int __init atmel_console_setup(struct console *co, char *options) return -ENODEV; } + clk_enable(atmel_ports[co->index].clk); + UART_PUT_IDR(port, -1); UART_PUT_CR(port, ATMEL_US_RSTSTA | ATMEL_US_RSTRX); UART_PUT_CR(port, ATMEL_US_TXEN | ATMEL_US_RXEN); @@ -1403,7 +1407,7 @@ static struct console atmel_console = { .data = &atmel_uart, }; -#define ATMEL_CONSOLE_DEVICE &atmel_console +#define ATMEL_CONSOLE_DEVICE (&atmel_console) /* * Early console initialization (before VM subsystem initialized). @@ -1534,6 +1538,15 @@ static int __devinit atmel_serial_probe(struct platform_device *pdev) if (ret) goto err_add_port; + if (atmel_is_console_port(&port->uart) + && ATMEL_CONSOLE_DEVICE->flags & CON_ENABLED) { + /* + * The serial core enabled the clock for us, so undo + * the clk_enable() in atmel_console_setup() + */ + clk_disable(port->clk); + } + device_init_wakeup(&pdev->dev, 1); platform_set_drvdata(pdev, port); @@ -1544,7 +1557,6 @@ err_add_port: port->rx_ring.buf = NULL; err_alloc_ring: if (!atmel_is_console_port(&port->uart)) { - clk_disable(port->clk); clk_put(port->clk); port->clk = NULL; } @@ -1568,7 +1580,6 @@ static int __devexit atmel_serial_remove(struct platform_device *pdev) /* "port" is allocated statically, so we shouldn't free it */ - clk_disable(atmel_port->clk); clk_put(atmel_port->clk); return ret; diff --git a/drivers/serial/crisv10.c b/drivers/serial/crisv10.c index 211c21797ce..8b2c619a09f 100644 --- a/drivers/serial/crisv10.c +++ b/drivers/serial/crisv10.c @@ -34,14 +34,14 @@ static char *serial_version = "$Revision: 1.25 $"; #include <asm/system.h> #include <linux/delay.h> -#include <asm/arch/svinto.h> +#include <arch/svinto.h> /* non-arch dependent serial structures are in linux/serial.h */ #include <linux/serial.h> /* while we keep our own stuff (struct e100_serial) in a local .h file */ #include "crisv10.h" #include <asm/fasttimer.h> -#include <asm/arch/io_interface_mux.h> +#include <arch/io_interface_mux.h> #ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER #ifndef CONFIG_ETRAX_FAST_TIMER diff --git a/drivers/serial/crisv10.h b/drivers/serial/crisv10.h index e3c5c8c3c09..f36a729280b 100644 --- a/drivers/serial/crisv10.h +++ b/drivers/serial/crisv10.h @@ -10,7 +10,7 @@ #include <linux/circ_buf.h> #include <asm/termios.h> #include <asm/dma.h> -#include <asm/arch/io_interface_mux.h> +#include <arch/io_interface_mux.h> /* Software state per channel */ diff --git a/drivers/serial/netx-serial.c b/drivers/serial/netx-serial.c index 3f489329e8d..3e5dda8518b 100644 --- a/drivers/serial/netx-serial.c +++ b/drivers/serial/netx-serial.c @@ -42,8 +42,6 @@ #define SERIAL_NX_MAJOR 204 #define MINOR_START 170 -#ifdef CONFIG_SERIAL_NETX_CONSOLE - enum uart_regs { UART_DR = 0x00, UART_SR = 0x04, @@ -528,6 +526,8 @@ static struct netx_port netx_ports[] = { } }; +#ifdef CONFIG_SERIAL_NETX_CONSOLE + static void netx_console_putchar(struct uart_port *port, int ch) { while (readl(port->membase + UART_FR) & FR_BUSY); diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index f0658d2c45b..5c0f32c7fbf 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -250,8 +250,7 @@ static inline void h8300_sci_disable(struct uart_port *port) } #endif -#if defined(SCI_ONLY) || defined(SCI_AND_SCIF) && \ - defined(__H8300H__) || defined(__H8300S__) +#if defined(__H8300H__) || defined(__H8300S__) static void sci_init_pins_sci(struct uart_port* port, unsigned int cflag) { int ch = (port->mapbase - SMR0) >> 3; @@ -285,11 +284,6 @@ static void sci_init_pins_irda(struct uart_port *port, unsigned int cflag) #define sci_init_pins_irda NULL #endif -#ifdef SCI_ONLY -#define sci_init_pins_scif NULL -#endif - -#if defined(SCIF_ONLY) || defined(SCI_AND_SCIF) #if defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712) static void sci_init_pins_scif(struct uart_port* port, unsigned int cflag) { @@ -449,7 +443,6 @@ static inline int scif_rxroom(struct uart_port *port) return sci_in(port, SCFDR) & SCIF_RFDC_MASK; } #endif -#endif /* SCIF_ONLY || SCI_AND_SCIF */ static inline int sci_txroom(struct uart_port *port) { @@ -485,11 +478,9 @@ static void sci_transmit_chars(struct uart_port *port) return; } -#ifndef SCI_ONLY if (port->type == PORT_SCIF) count = scif_txroom(port); else -#endif count = sci_txroom(port); do { @@ -519,12 +510,10 @@ static void sci_transmit_chars(struct uart_port *port) } else { ctrl = sci_in(port, SCSCR); -#if !defined(SCI_ONLY) if (port->type == PORT_SCIF) { sci_in(port, SCxSR); /* Dummy read */ sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port)); } -#endif ctrl |= SCI_CTRL_FLAGS_TIE; sci_out(port, SCSCR, ctrl); @@ -547,11 +536,9 @@ static inline void sci_receive_chars(struct uart_port *port) return; while (1) { -#if !defined(SCI_ONLY) if (port->type == PORT_SCIF) count = scif_rxroom(port); else -#endif count = sci_rxroom(port); /* Don't copy more bytes than there is room for in the buffer */ @@ -810,26 +797,27 @@ static irqreturn_t sci_br_interrupt(int irq, void *ptr) static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr) { - unsigned short ssr_status, scr_status; - struct uart_port *port = ptr; + unsigned short ssr_status, scr_status; + struct uart_port *port = ptr; + irqreturn_t ret = IRQ_NONE; ssr_status = sci_in(port,SCxSR); scr_status = sci_in(port,SCSCR); /* Tx Interrupt */ - if ((ssr_status & 0x0020) && (scr_status & 0x0080)) - sci_tx_interrupt(irq, ptr); + if ((ssr_status & 0x0020) && (scr_status & SCI_CTRL_FLAGS_TIE)) + ret = sci_tx_interrupt(irq, ptr); /* Rx Interrupt */ - if ((ssr_status & 0x0002) && (scr_status & 0x0040)) - sci_rx_interrupt(irq, ptr); + if ((ssr_status & 0x0002) && (scr_status & SCI_CTRL_FLAGS_RIE)) + ret = sci_rx_interrupt(irq, ptr); /* Error Interrupt */ - if ((ssr_status & 0x0080) && (scr_status & 0x0400)) - sci_er_interrupt(irq, ptr); + if ((ssr_status & 0x0080) && (scr_status & SCI_CTRL_FLAGS_REIE)) + ret = sci_er_interrupt(irq, ptr); /* Break Interrupt */ - if ((ssr_status & 0x0010) && (scr_status & 0x0200)) - sci_br_interrupt(irq, ptr); + if ((ssr_status & 0x0010) && (scr_status & SCI_CTRL_FLAGS_REIE)) + ret = sci_br_interrupt(irq, ptr); - return IRQ_HANDLED; + return ret; } #if defined(CONFIG_CPU_FREQ) && defined(CONFIG_HAVE_CLK) @@ -1054,10 +1042,8 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios, sci_out(port, SCSCR, 0x00); /* TE=0, RE=0, CKE1=0 */ -#if !defined(SCI_ONLY) if (port->type == PORT_SCIF) sci_out(port, SCFCR, SCFCR_RFRST | SCFCR_TFRST); -#endif smr_val = sci_in(port, SCSMR) & 3; if ((termios->c_cflag & CSIZE) == CS7) diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h index 7cd28b22680..6163a45f968 100644 --- a/drivers/serial/sh-sci.h +++ b/drivers/serial/sh-sci.h @@ -16,7 +16,6 @@ # define SCPCR 0xA4000116 /* 16 bit SCI and SCIF */ # define SCPDR 0xA4000136 /* 8 bit SCI and SCIF */ # define SCSCR_INIT(port) 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */ -# define SCI_AND_SCIF #elif defined(CONFIG_CPU_SUBTYPE_SH7705) # define SCIF0 0xA4400000 # define SCIF2 0xA4410000 @@ -30,17 +29,15 @@ * SCIF0 (0xA4400000) -> Internal clock, SCK pin as serial clock output */ # define SCSCR_INIT(port) (port->mapbase == SCIF2) ? 0xF3 : 0xF0 -# define SCIF_ONLY #elif defined(CONFIG_CPU_SUBTYPE_SH7720) || \ defined(CONFIG_CPU_SUBTYPE_SH7721) # define SCSCR_INIT(port) 0x0030 /* TIE=0,RIE=0,TE=1,RE=1 */ -# define SCIF_ONLY #define SCIF_ORER 0x0200 /* overrun error bit */ #elif defined(CONFIG_SH_RTS7751R2D) +# define SCSPTR1 0xFFE0001C /* 8 bit SCIF */ # define SCSPTR2 0xFFE80020 /* 16 bit SCIF */ # define SCIF_ORER 0x0001 /* overrun error bit */ # define SCSCR_INIT(port) 0x3a /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ -# define SCIF_ONLY #elif defined(CONFIG_CPU_SUBTYPE_SH7750) || \ defined(CONFIG_CPU_SUBTYPE_SH7750R) || \ defined(CONFIG_CPU_SUBTYPE_SH7750S) || \ @@ -53,28 +50,24 @@ # define SCSCR_INIT(port) (((port)->type == PORT_SCI) ? \ 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */ : \ 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ ) -# define SCI_AND_SCIF #elif defined(CONFIG_CPU_SUBTYPE_SH7760) # define SCSPTR0 0xfe600024 /* 16 bit SCIF */ # define SCSPTR1 0xfe610024 /* 16 bit SCIF */ # define SCSPTR2 0xfe620024 /* 16 bit SCIF */ # define SCIF_ORER 0x0001 /* overrun error bit */ # define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ -# define SCIF_ONLY #elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712) # define SCSPTR0 0xA4400000 /* 16 bit SCIF */ # define SCIF_ORER 0x0001 /* overrun error bit */ # define PACR 0xa4050100 # define PBCR 0xa4050102 # define SCSCR_INIT(port) 0x3B -# define SCIF_ONLY #elif defined(CONFIG_CPU_SUBTYPE_SH7343) # define SCSPTR0 0xffe00010 /* 16 bit SCIF */ # define SCSPTR1 0xffe10010 /* 16 bit SCIF */ # define SCSPTR2 0xffe20010 /* 16 bit SCIF */ # define SCSPTR3 0xffe30010 /* 16 bit SCIF */ # define SCSCR_INIT(port) 0x32 /* TIE=0,RIE=0,TE=1,RE=1,REIE=0,CKE=1 */ -# define SCIF_ONLY #elif defined(CONFIG_CPU_SUBTYPE_SH7722) # define PADR 0xA4050120 # define PSDR 0xA405013e @@ -82,7 +75,6 @@ # define PSCR 0xA405011E # define SCIF_ORER 0x0001 /* overrun error bit */ # define SCSCR_INIT(port) 0x0038 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ -# define SCIF_ONLY #elif defined(CONFIG_CPU_SUBTYPE_SH7366) # define SCPDR0 0xA405013E /* 16 bit SCIF0 PSDR */ # define SCSPTR0 SCPDR0 @@ -97,12 +89,10 @@ # define SCSPTR5 0xa4050128 # define SCIF_ORER 0x0001 /* overrun error bit */ # define SCSCR_INIT(port) 0x0038 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ -# define SCIF_ONLY #elif defined(CONFIG_CPU_SUBTYPE_SH4_202) # define SCSPTR2 0xffe80020 /* 16 bit SCIF */ # define SCIF_ORER 0x0001 /* overrun error bit */ # define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ -# define SCIF_ONLY #elif defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103) # define SCIF_BASE_ADDR 0x01030000 # define SCIF_ADDR_SH5 PHYS_PERIPHERAL_BLOCK+SCIF_BASE_ADDR @@ -111,14 +101,11 @@ # define SCSPTR2 ((port->mapbase)+SCIF_PTR2_OFFS) /* 16 bit SCIF */ # define SCLSR2 ((port->mapbase)+SCIF_LSR2_OFFS) /* 16 bit SCIF */ # define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0, TE=1,RE=1,REIE=1 */ -# define SCIF_ONLY #elif defined(CONFIG_H83007) || defined(CONFIG_H83068) # define SCSCR_INIT(port) 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */ -# define SCI_ONLY # define H8300_SCI_DR(ch) *(volatile char *)(P1DR + h8300_sci_pins[ch].port) #elif defined(CONFIG_H8S2678) # define SCSCR_INIT(port) 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */ -# define SCI_ONLY # define H8300_SCI_DR(ch) *(volatile char *)(P1DR + h8300_sci_pins[ch].port) #elif defined(CONFIG_CPU_SUBTYPE_SH7763) # define SCSPTR0 0xffe00024 /* 16 bit SCIF */ @@ -126,20 +113,17 @@ # define SCSPTR2 0xffe10020 /* 16 bit SCIF/IRDA */ # define SCIF_ORER 0x0001 /* overrun error bit */ # define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ -# define SCIF_ONLY #elif defined(CONFIG_CPU_SUBTYPE_SH7770) # define SCSPTR0 0xff923020 /* 16 bit SCIF */ # define SCSPTR1 0xff924020 /* 16 bit SCIF */ # define SCSPTR2 0xff925020 /* 16 bit SCIF */ # define SCIF_ORER 0x0001 /* overrun error bit */ # define SCSCR_INIT(port) 0x3c /* TIE=0,RIE=0,TE=1,RE=1,REIE=1,cke=2 */ -# define SCIF_ONLY #elif defined(CONFIG_CPU_SUBTYPE_SH7780) # define SCSPTR0 0xffe00024 /* 16 bit SCIF */ # define SCSPTR1 0xffe10024 /* 16 bit SCIF */ # define SCIF_ORER 0x0001 /* Overrun error bit */ # define SCSCR_INIT(port) 0x3a /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ -# define SCIF_ONLY #elif defined(CONFIG_CPU_SUBTYPE_SH7785) # define SCSPTR0 0xffea0024 /* 16 bit SCIF */ # define SCSPTR1 0xffeb0024 /* 16 bit SCIF */ @@ -149,7 +133,6 @@ # define SCSPTR5 0xffef0024 /* 16 bit SCIF */ # define SCIF_OPER 0x0001 /* Overrun error bit */ # define SCSCR_INIT(port) 0x3a /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ -# define SCIF_ONLY #elif defined(CONFIG_CPU_SUBTYPE_SH7203) || \ defined(CONFIG_CPU_SUBTYPE_SH7206) || \ defined(CONFIG_CPU_SUBTYPE_SH7263) @@ -158,14 +141,12 @@ # define SCSPTR2 0xfffe9020 /* 16 bit SCIF */ # define SCSPTR3 0xfffe9820 /* 16 bit SCIF */ # define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ -# define SCIF_ONLY #elif defined(CONFIG_CPU_SUBTYPE_SH7619) # define SCSPTR0 0xf8400020 /* 16 bit SCIF */ # define SCSPTR1 0xf8410020 /* 16 bit SCIF */ # define SCSPTR2 0xf8420020 /* 16 bit SCIF */ # define SCIF_ORER 0x0001 /* overrun error bit */ # define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ -# define SCIF_ONLY #elif defined(CONFIG_CPU_SUBTYPE_SHX3) # define SCSPTR0 0xffc30020 /* 16 bit SCIF */ # define SCSPTR1 0xffc40020 /* 16 bit SCIF */ @@ -173,7 +154,6 @@ # define SCSPTR3 0xffc60020 /* 16 bit SCIF */ # define SCIF_ORER 0x0001 /* Overrun error bit */ # define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ -# define SCIF_ONLY #else # error CPU subtype not defined #endif @@ -186,6 +166,7 @@ #if defined(CONFIG_CPU_SUBTYPE_SH7750) || \ defined(CONFIG_CPU_SUBTYPE_SH7091) || \ defined(CONFIG_CPU_SUBTYPE_SH7750R) || \ + defined(CONFIG_CPU_SUBTYPE_SH7722) || \ defined(CONFIG_CPU_SUBTYPE_SH7750S) || \ defined(CONFIG_CPU_SUBTYPE_SH7751) || \ defined(CONFIG_CPU_SUBTYPE_SH7751R) || \ @@ -244,55 +225,28 @@ # define SCIF_TXROOM_MAX 16 #endif -#if defined(SCI_ONLY) -# define SCxSR_TEND(port) SCI_TEND -# define SCxSR_ERRORS(port) SCI_ERRORS -# define SCxSR_RDxF(port) SCI_RDRF -# define SCxSR_TDxE(port) SCI_TDRE -# define SCxSR_ORER(port) SCI_ORER -# define SCxSR_FER(port) SCI_FER -# define SCxSR_PER(port) SCI_PER -# define SCxSR_BRK(port) 0x00 -# define SCxSR_RDxF_CLEAR(port) 0xbc -# define SCxSR_ERROR_CLEAR(port) 0xc4 -# define SCxSR_TDxE_CLEAR(port) 0x78 -# define SCxSR_BREAK_CLEAR(port) 0xc4 -#elif defined(SCIF_ONLY) -# define SCxSR_TEND(port) SCIF_TEND -# define SCxSR_ERRORS(port) SCIF_ERRORS -# define SCxSR_RDxF(port) SCIF_RDF -# define SCxSR_TDxE(port) SCIF_TDFE +#define SCxSR_TEND(port) (((port)->type == PORT_SCI) ? SCI_TEND : SCIF_TEND) +#define SCxSR_ERRORS(port) (((port)->type == PORT_SCI) ? SCI_ERRORS : SCIF_ERRORS) +#define SCxSR_RDxF(port) (((port)->type == PORT_SCI) ? SCI_RDRF : SCIF_RDF) +#define SCxSR_TDxE(port) (((port)->type == PORT_SCI) ? SCI_TDRE : SCIF_TDFE) +#define SCxSR_FER(port) (((port)->type == PORT_SCI) ? SCI_FER : SCIF_FER) +#define SCxSR_PER(port) (((port)->type == PORT_SCI) ? SCI_PER : SCIF_PER) +#define SCxSR_BRK(port) (((port)->type == PORT_SCI) ? 0x00 : SCIF_BRK) + #if defined(CONFIG_CPU_SUBTYPE_SH7705) -# define SCxSR_ORER(port) SCIF_ORER +# define SCxSR_ORER(port) (((port)->type == PORT_SCI) ? SCI_ORER : SCIF_ORER) #else -# define SCxSR_ORER(port) 0x0000 +# define SCxSR_ORER(port) (((port)->type == PORT_SCI) ? SCI_ORER : 0x0000) #endif -# define SCxSR_FER(port) SCIF_FER -# define SCxSR_PER(port) SCIF_PER -# define SCxSR_BRK(port) SCIF_BRK + #if defined(CONFIG_CPU_SUBTYPE_SH7705) || \ defined(CONFIG_CPU_SUBTYPE_SH7720) || \ defined(CONFIG_CPU_SUBTYPE_SH7721) -# define SCxSR_RDxF_CLEAR(port) (sci_in(port,SCxSR)&0xfffc) -# define SCxSR_ERROR_CLEAR(port) (sci_in(port,SCxSR)&0xfd73) -# define SCxSR_TDxE_CLEAR(port) (sci_in(port,SCxSR)&0xffdf) -# define SCxSR_BREAK_CLEAR(port) (sci_in(port,SCxSR)&0xffe3) -#else -/* SH7705 can also use this, clearing is same between 7705 and 7709 */ -# define SCxSR_RDxF_CLEAR(port) 0x00fc -# define SCxSR_ERROR_CLEAR(port) 0x0073 -# define SCxSR_TDxE_CLEAR(port) 0x00df -# define SCxSR_BREAK_CLEAR(port) 0x00e3 -#endif +# define SCxSR_RDxF_CLEAR(port) (sci_in(port, SCxSR) & 0xfffc) +# define SCxSR_ERROR_CLEAR(port) (sci_in(port, SCxSR) & 0xfd73) +# define SCxSR_TDxE_CLEAR(port) (sci_in(port, SCxSR) & 0xffdf) +# define SCxSR_BREAK_CLEAR(port) (sci_in(port, SCxSR) & 0xffe3) #else -# define SCxSR_TEND(port) (((port)->type == PORT_SCI) ? SCI_TEND : SCIF_TEND) -# define SCxSR_ERRORS(port) (((port)->type == PORT_SCI) ? SCI_ERRORS : SCIF_ERRORS) -# define SCxSR_RDxF(port) (((port)->type == PORT_SCI) ? SCI_RDRF : SCIF_RDF) -# define SCxSR_TDxE(port) (((port)->type == PORT_SCI) ? SCI_TDRE : SCIF_TDFE) -# define SCxSR_ORER(port) (((port)->type == PORT_SCI) ? SCI_ORER : 0x0000) -# define SCxSR_FER(port) (((port)->type == PORT_SCI) ? SCI_FER : SCIF_FER) -# define SCxSR_PER(port) (((port)->type == PORT_SCI) ? SCI_PER : SCIF_PER) -# define SCxSR_BRK(port) (((port)->type == PORT_SCI) ? 0x00 : SCIF_BRK) # define SCxSR_RDxF_CLEAR(port) (((port)->type == PORT_SCI) ? 0xbc : 0x00fc) # define SCxSR_ERROR_CLEAR(port) (((port)->type == PORT_SCI) ? 0xc4 : 0x0073) # define SCxSR_TDxE_CLEAR(port) (((port)->type == PORT_SCI) ? 0x78 : 0x00df) @@ -574,18 +528,20 @@ static inline int sci_rxd_in(struct uart_port *port) defined(CONFIG_CPU_SUBTYPE_SH7751R) || \ defined(CONFIG_CPU_SUBTYPE_SH7750R) || \ defined(CONFIG_CPU_SUBTYPE_SH7750S) || \ - defined(CONFIG_CPU_SUBTYPE_SH7091) || \ - defined(CONFIG_CPU_SUBTYPE_SH4_202) + defined(CONFIG_CPU_SUBTYPE_SH7091) static inline int sci_rxd_in(struct uart_port *port) { -#ifndef SCIF_ONLY if (port->mapbase == 0xffe00000) return ctrl_inb(SCSPTR1)&0x01 ? 1 : 0; /* SCI */ -#endif -#ifndef SCI_ONLY if (port->mapbase == 0xffe80000) return ctrl_inw(SCSPTR2)&0x0001 ? 1 : 0; /* SCIF */ -#endif + return 1; +} +#elif defined(CONFIG_CPU_SUBTYPE_SH4_202) +static inline int sci_rxd_in(struct uart_port *port) +{ + if (port->mapbase == 0xffe80000) + return ctrl_inw(SCSPTR2)&0x0001 ? 1 : 0; /* SCIF */ return 1; } #elif defined(CONFIG_CPU_SUBTYPE_SH7760) @@ -651,7 +607,7 @@ static inline int sci_rxd_in(struct uart_port *port) #elif defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103) static inline int sci_rxd_in(struct uart_port *port) { - return sci_in(port, SCSPTR)&0x0001 ? 1 : 0; /* SCIF */ + return sci_in(port, SCSPTR2)&0x0001 ? 1 : 0; /* SCIF */ } #elif defined(__H8300H__) || defined(__H8300S__) static inline int sci_rxd_in(struct uart_port *port) diff --git a/drivers/staging/echo/echo.c b/drivers/staging/echo/echo.c index b8f2c5e9dee..fd4007e329e 100644 --- a/drivers/staging/echo/echo.c +++ b/drivers/staging/echo/echo.c @@ -106,7 +106,6 @@ #include <linux/kernel.h> /* We're doing kernel work */ #include <linux/module.h> -#include <linux/kernel.h> #include <linux/slab.h> #include "bit_operations.h" diff --git a/drivers/staging/me4000/me4000.c b/drivers/staging/me4000/me4000.c index 0b33773bb4f..0394e270927 100644 --- a/drivers/staging/me4000/me4000.c +++ b/drivers/staging/me4000/me4000.c @@ -39,7 +39,6 @@ #include <asm/uaccess.h> #include <asm/io.h> #include <asm/system.h> -#include <asm/uaccess.h> /* Include-File for the Meilhaus ME-4000 I/O board */ #include "me4000.h" @@ -1633,9 +1632,6 @@ static int me4000_release(struct inode *inode_p, struct file *file_p) free_irq(ext_int_context->irq, ext_int_context); - /* Delete the fasync structure and free memory */ - me4000_ext_int_fasync(0, file_p, 0); - /* Mark as unused */ ext_int_context->in_use = 0; } else { diff --git a/drivers/telephony/ixj.c b/drivers/telephony/ixj.c index 41b6530b8f2..a913efc6966 100644 --- a/drivers/telephony/ixj.c +++ b/drivers/telephony/ixj.c @@ -2328,7 +2328,6 @@ static int ixj_release(struct inode *inode, struct file *file_p) j->rec_codec = j->play_codec = 0; j->rec_frame_size = j->play_frame_size = 0; j->flags.cidsent = j->flags.cidring = 0; - ixj_fasync(-1, file_p, 0); /* remove from list of async notification */ if(j->cardtype == QTI_LINEJACK && !j->readers && !j->writers) { ixj_set_port(j, PORT_PSTN); diff --git a/drivers/uio/uio.c b/drivers/uio/uio.c index f9b4647255a..2d2440cd57a 100644 --- a/drivers/uio/uio.c +++ b/drivers/uio/uio.c @@ -367,9 +367,6 @@ static int uio_release(struct inode *inode, struct file *filep) ret = idev->info->release(idev->info, inode); module_put(idev->owner); - - if (filep->f_flags & FASYNC) - ret = uio_fasync(-1, filep, 0); kfree(listener); return ret; } diff --git a/drivers/usb/class/usbtmc.c b/drivers/usb/class/usbtmc.c index 543811f6e6e..8e74657f106 100644 --- a/drivers/usb/class/usbtmc.c +++ b/drivers/usb/class/usbtmc.c @@ -133,7 +133,7 @@ static int usbtmc_release(struct inode *inode, struct file *file) static int usbtmc_ioctl_abort_bulk_in(struct usbtmc_device_data *data) { - char *buffer; + u8 *buffer; struct device *dev; int rv; int n; diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index fc9018e72a0..e1b42626d04 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -106,6 +106,9 @@ static DEFINE_SPINLOCK(hcd_root_hub_lock); /* used when updating an endpoint's URB list */ static DEFINE_SPINLOCK(hcd_urb_list_lock); +/* used to protect against unlinking URBs after the device is gone */ +static DEFINE_SPINLOCK(hcd_urb_unlink_lock); + /* wait queue for synchronous unlinks */ DECLARE_WAIT_QUEUE_HEAD(usb_kill_urb_queue); @@ -1376,10 +1379,25 @@ static int unlink1(struct usb_hcd *hcd, struct urb *urb, int status) int usb_hcd_unlink_urb (struct urb *urb, int status) { struct usb_hcd *hcd; - int retval; + int retval = -EIDRM; + unsigned long flags; - hcd = bus_to_hcd(urb->dev->bus); - retval = unlink1(hcd, urb, status); + /* Prevent the device and bus from going away while + * the unlink is carried out. If they are already gone + * then urb->use_count must be 0, since disconnected + * devices can't have any active URBs. + */ + spin_lock_irqsave(&hcd_urb_unlink_lock, flags); + if (atomic_read(&urb->use_count) > 0) { + retval = 0; + usb_get_dev(urb->dev); + } + spin_unlock_irqrestore(&hcd_urb_unlink_lock, flags); + if (retval == 0) { + hcd = bus_to_hcd(urb->dev->bus); + retval = unlink1(hcd, urb, status); + usb_put_dev(urb->dev); + } if (retval == 0) retval = -EINPROGRESS; @@ -1528,6 +1546,17 @@ void usb_hcd_disable_endpoint(struct usb_device *udev, hcd->driver->endpoint_disable(hcd, ep); } +/* Protect against drivers that try to unlink URBs after the device + * is gone, by waiting until all unlinks for @udev are finished. + * Since we don't currently track URBs by device, simply wait until + * nothing is running in the locked region of usb_hcd_unlink_urb(). + */ +void usb_hcd_synchronize_unlinks(struct usb_device *udev) +{ + spin_lock_irq(&hcd_urb_unlink_lock); + spin_unlock_irq(&hcd_urb_unlink_lock); +} + /*-------------------------------------------------------------------------*/ /* called in any context */ diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h index 2dcde61c465..9465e70f4dd 100644 --- a/drivers/usb/core/hcd.h +++ b/drivers/usb/core/hcd.h @@ -232,6 +232,7 @@ extern void usb_hcd_flush_endpoint(struct usb_device *udev, struct usb_host_endpoint *ep); extern void usb_hcd_disable_endpoint(struct usb_device *udev, struct usb_host_endpoint *ep); +extern void usb_hcd_synchronize_unlinks(struct usb_device *udev); extern int usb_hcd_get_frame_number(struct usb_device *udev); extern struct usb_hcd *usb_create_hcd(const struct hc_driver *driver, diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 9b3f16bd12c..b19cbfcd51d 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -659,6 +659,9 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) PREPARE_DELAYED_WORK(&hub->init_work, hub_init_func2); schedule_delayed_work(&hub->init_work, msecs_to_jiffies(delay)); + + /* Suppress autosuspend until init is done */ + to_usb_interface(hub->intfdev)->pm_usage_cnt = 1; return; /* Continues at init2: below */ } else { hub_power_on(hub, true); @@ -1429,6 +1432,7 @@ void usb_disconnect(struct usb_device **pdev) */ dev_dbg (&udev->dev, "unregistering device\n"); usb_disable_device(udev, 0); + usb_hcd_synchronize_unlinks(udev); usb_unlock_device(udev); diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c index f2638009a46..4342bd9c3bb 100644 --- a/drivers/usb/core/urb.c +++ b/drivers/usb/core/urb.c @@ -474,6 +474,12 @@ EXPORT_SYMBOL_GPL(usb_submit_urb); * indicating that the request has been canceled (rather than any other * code). * + * Drivers should not call this routine or related routines, such as + * usb_kill_urb() or usb_unlink_anchored_urbs(), after their disconnect + * method has returned. The disconnect function should synchronize with + * a driver's I/O routines to insure that all URB-related activity has + * completed before it returns. + * * This request is always asynchronous. Success is indicated by * returning -EINPROGRESS, at which time the URB will probably not yet * have been given back to the device driver. When it is eventually @@ -550,6 +556,9 @@ EXPORT_SYMBOL_GPL(usb_unlink_urb); * This routine may not be used in an interrupt context (such as a bottom * half or a completion handler), or when holding a spinlock, or in other * situations where the caller can't schedule(). + * + * This routine should not be called by a driver after its disconnect + * method has returned. */ void usb_kill_urb(struct urb *urb) { @@ -588,6 +597,9 @@ EXPORT_SYMBOL_GPL(usb_kill_urb); * This routine may not be used in an interrupt context (such as a bottom * half or a completion handler), or when holding a spinlock, or in other * situations where the caller can't schedule(). + * + * This routine should not be called by a driver after its disconnect + * method has returned. */ void usb_poison_urb(struct urb *urb) { @@ -622,6 +634,9 @@ EXPORT_SYMBOL_GPL(usb_unpoison_urb); * * this allows all outstanding URBs to be killed starting * from the back of the queue + * + * This routine should not be called by a driver after its disconnect + * method has returned. */ void usb_kill_anchored_urbs(struct usb_anchor *anchor) { @@ -651,6 +666,9 @@ EXPORT_SYMBOL_GPL(usb_kill_anchored_urbs); * this allows all outstanding URBs to be poisoned starting * from the back of the queue. Newly added URBs will also be * poisoned + * + * This routine should not be called by a driver after its disconnect + * method has returned. */ void usb_poison_anchored_urbs(struct usb_anchor *anchor) { @@ -672,6 +690,7 @@ void usb_poison_anchored_urbs(struct usb_anchor *anchor) spin_unlock_irq(&anchor->lock); } EXPORT_SYMBOL_GPL(usb_poison_anchored_urbs); + /** * usb_unlink_anchored_urbs - asynchronously cancel transfer requests en masse * @anchor: anchor the requests are bound to @@ -680,6 +699,9 @@ EXPORT_SYMBOL_GPL(usb_poison_anchored_urbs); * from the back of the queue. This function is asynchronous. * The unlinking is just tiggered. It may happen after this * function has returned. + * + * This routine should not be called by a driver after its disconnect + * method has returned. */ void usb_unlink_anchored_urbs(struct usb_anchor *anchor) { diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c index f4585d3e90d..eeb26c0f88e 100644 --- a/drivers/usb/gadget/inode.c +++ b/drivers/usb/gadget/inode.c @@ -1251,7 +1251,6 @@ dev_release (struct inode *inode, struct file *fd) * alternatively, all host requests will time out. */ - fasync_helper (-1, fd, 0, &dev->fasync); kfree (dev->buf); dev->buf = NULL; put_dev (dev); diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 8be3f39891c..794b5ffe439 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -281,6 +281,7 @@ static void serial_close(struct tty_struct *tty, struct file *filp) if (tty->driver_data) tty->driver_data = NULL; tty_port_tty_set(&port->port, NULL); + tty_kref_put(tty); } } diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index a2b9ebbef38..fb9e20e624c 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -333,6 +333,13 @@ UNUSUAL_DEV( 0x0482, 0x0103, 0x0100, 0x0100, "Finecam S5", US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY), +/* Patch submitted by Jens Taprogge <jens.taprogge@taprogge.org> */ +UNUSUAL_DEV( 0x0482, 0x0107, 0x0100, 0x0100, + "Kyocera", + "CONTAX SL300R T*", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE), + /* Reported by Paul Stewart <stewart@wetlogic.net> * This entry is needed because the device reports Sub=ff */ UNUSUAL_DEV( 0x04a4, 0x0004, 0x0001, 0x0001, diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 0f13448c6f7..3f3ce13fef4 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -2083,6 +2083,38 @@ config FB_METRONOME controller. The pre-release name for this device was 8track and could also have been called by some vendors as PVI-nnnn. +config FB_MB862XX + tristate "Fujitsu MB862xx GDC support" + depends on FB + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + ---help--- + Frame buffer driver for Fujitsu Carmine/Coral-P(A)/Lime controllers. + +config FB_MB862XX_PCI_GDC + bool "Carmine/Coral-P(A) GDC" + depends on PCI && FB_MB862XX + ---help--- + This enables framebuffer support for Fujitsu Carmine/Coral-P(A) + PCI graphics controller devices. + +config FB_MB862XX_LIME + bool "Lime GDC" + depends on FB_MB862XX + depends on OF && !FB_MB862XX_PCI_GDC + select FB_FOREIGN_ENDIAN + select FB_LITTLE_ENDIAN + ---help--- + Framebuffer support for Fujitsu Lime GDC on host CPU bus. + +config FB_PRE_INIT_FB + bool "Don't reinitialize, use bootloader's GDC/Display configuration" + depends on FB_MB862XX_LIME + ---help--- + Select this option if display contents should be inherited as set by + the bootloader. + source "drivers/video/omap/Kconfig" source "drivers/video/backlight/Kconfig" diff --git a/drivers/video/Makefile b/drivers/video/Makefile index 248bddc8d0b..e39e33e797d 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -122,6 +122,7 @@ obj-$(CONFIG_FB_SH_MOBILE_LCDC) += sh_mobile_lcdcfb.o obj-$(CONFIG_FB_OMAP) += omap/ obj-$(CONFIG_XEN_FBDEV_FRONTEND) += xen-fbfront.o obj-$(CONFIG_FB_CARMINE) += carminefb.o +obj-$(CONFIG_FB_MB862XX) += mb862xx/ # Platform or fallback drivers go here obj-$(CONFIG_FB_UVESA) += uvesafb.o diff --git a/drivers/video/backlight/corgi_lcd.c b/drivers/video/backlight/corgi_lcd.c index 2afd47eefe7..f8a4bb20f41 100644 --- a/drivers/video/backlight/corgi_lcd.c +++ b/drivers/video/backlight/corgi_lcd.c @@ -439,7 +439,7 @@ static int corgi_bl_update_status(struct backlight_device *bd) return corgi_bl_set_intensity(lcd, intensity); } -void corgibl_limit_intensity(int limit) +void corgi_lcd_limit_intensity(int limit) { if (limit) corgibl_flags |= CORGIBL_BATTLOW; @@ -448,7 +448,7 @@ void corgibl_limit_intensity(int limit) backlight_update_status(the_corgi_lcd->bl_dev); } -EXPORT_SYMBOL(corgibl_limit_intensity); +EXPORT_SYMBOL(corgi_lcd_limit_intensity); static struct backlight_ops corgi_bl_ops = { .get_brightness = corgi_bl_get_intensity, diff --git a/drivers/video/cirrusfb.c b/drivers/video/cirrusfb.c index 048b139f0e5..8a8760230bc 100644 --- a/drivers/video/cirrusfb.c +++ b/drivers/video/cirrusfb.c @@ -2049,7 +2049,7 @@ static void cirrusfb_pci_unmap(struct fb_info *info) #endif /* CONFIG_PCI */ #ifdef CONFIG_ZORRO -static void __devexit cirrusfb_zorro_unmap(struct fb_info *info) +static void cirrusfb_zorro_unmap(struct fb_info *info) { struct cirrusfb_info *cinfo = info->par; struct zorro_dev *zdev = to_zorro_dev(info->device); diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c index 64b3d30027b..b92947d62ad 100644 --- a/drivers/video/console/fbcon.c +++ b/drivers/video/console/fbcon.c @@ -2118,7 +2118,7 @@ static void fbcon_bmove_rec(struct vc_data *vc, struct display *p, int sy, int s height, width); } -static __inline__ void updatescrollmode(struct display *p, +static void updatescrollmode(struct display *p, struct fb_info *info, struct vc_data *vc) { diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c index cd5f20da738..1d5ae39cb27 100644 --- a/drivers/video/fbmem.c +++ b/drivers/video/fbmem.c @@ -1002,13 +1002,9 @@ fb_blank(struct fb_info *info, int blank) return ret; } -static long -fb_ioctl(struct file *file, unsigned int cmd, - unsigned long arg) +static long do_fb_ioctl(struct fb_info *info, unsigned int cmd, + unsigned long arg) { - struct inode *inode = file->f_path.dentry->d_inode; - int fbidx = iminor(inode); - struct fb_info *info; struct fb_ops *fb; struct fb_var_screeninfo var; struct fb_fix_screeninfo fix; @@ -1018,14 +1014,10 @@ fb_ioctl(struct file *file, unsigned int cmd, void __user *argp = (void __user *)arg; long ret = 0; - info = registered_fb[fbidx]; - mutex_lock(&info->lock); fb = info->fbops; - - if (!fb) { - mutex_unlock(&info->lock); + if (!fb) return -ENODEV; - } + switch (cmd) { case FBIOGET_VSCREENINFO: ret = copy_to_user(argp, &info->var, @@ -1126,6 +1118,21 @@ fb_ioctl(struct file *file, unsigned int cmd, else ret = fb->fb_ioctl(info, cmd, arg); } + return ret; +} + +static long fb_ioctl(struct file *file, unsigned int cmd, unsigned long arg) +__acquires(&info->lock) +__releases(&info->lock) +{ + struct inode *inode = file->f_path.dentry->d_inode; + int fbidx = iminor(inode); + struct fb_info *info; + long ret; + + info = registered_fb[fbidx]; + mutex_lock(&info->lock); + ret = do_fb_ioctl(info, cmd, arg); mutex_unlock(&info->lock); return ret; } @@ -1157,8 +1164,8 @@ struct fb_cmap32 { compat_caddr_t transp; }; -static int fb_getput_cmap(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static int fb_getput_cmap(struct fb_info *info, unsigned int cmd, + unsigned long arg) { struct fb_cmap_user __user *cmap; struct fb_cmap32 __user *cmap32; @@ -1181,7 +1188,7 @@ static int fb_getput_cmap(struct inode *inode, struct file *file, put_user(compat_ptr(data), &cmap->transp)) return -EFAULT; - err = fb_ioctl(file, cmd, (unsigned long) cmap); + err = do_fb_ioctl(info, cmd, (unsigned long) cmap); if (!err) { if (copy_in_user(&cmap32->start, @@ -1223,8 +1230,8 @@ static int do_fscreeninfo_to_user(struct fb_fix_screeninfo *fix, return err; } -static int fb_get_fscreeninfo(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static int fb_get_fscreeninfo(struct fb_info *info, unsigned int cmd, + unsigned long arg) { mm_segment_t old_fs; struct fb_fix_screeninfo fix; @@ -1235,7 +1242,7 @@ static int fb_get_fscreeninfo(struct inode *inode, struct file *file, old_fs = get_fs(); set_fs(KERNEL_DS); - err = fb_ioctl(file, cmd, (unsigned long) &fix); + err = do_fb_ioctl(info, cmd, (unsigned long) &fix); set_fs(old_fs); if (!err) @@ -1244,8 +1251,10 @@ static int fb_get_fscreeninfo(struct inode *inode, struct file *file, return err; } -static long -fb_compat_ioctl(struct file *file, unsigned int cmd, unsigned long arg) +static long fb_compat_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +__acquires(&info->lock) +__releases(&info->lock) { struct inode *inode = file->f_path.dentry->d_inode; int fbidx = iminor(inode); @@ -1262,16 +1271,16 @@ fb_compat_ioctl(struct file *file, unsigned int cmd, unsigned long arg) case FBIOPUT_CON2FBMAP: arg = (unsigned long) compat_ptr(arg); case FBIOBLANK: - ret = fb_ioctl(file, cmd, arg); + ret = do_fb_ioctl(info, cmd, arg); break; case FBIOGET_FSCREENINFO: - ret = fb_get_fscreeninfo(inode, file, cmd, arg); + ret = fb_get_fscreeninfo(info, cmd, arg); break; case FBIOGETCMAP: case FBIOPUTCMAP: - ret = fb_getput_cmap(inode, file, cmd, arg); + ret = fb_getput_cmap(info, cmd, arg); break; default: @@ -1286,6 +1295,8 @@ fb_compat_ioctl(struct file *file, unsigned int cmd, unsigned long arg) static int fb_mmap(struct file *file, struct vm_area_struct * vma) +__acquires(&info->lock) +__releases(&info->lock) { int fbidx = iminor(file->f_path.dentry->d_inode); struct fb_info *info = registered_fb[fbidx]; @@ -1339,6 +1350,8 @@ fb_mmap(struct file *file, struct vm_area_struct * vma) static int fb_open(struct inode *inode, struct file *file) +__acquires(&info->lock) +__releases(&info->lock) { int fbidx = iminor(inode); struct fb_info *info; @@ -1374,6 +1387,8 @@ out: static int fb_release(struct inode *inode, struct file *file) +__acquires(&info->lock) +__releases(&info->lock) { struct fb_info * const info = file->private_data; diff --git a/drivers/video/mb862xx/Makefile b/drivers/video/mb862xx/Makefile new file mode 100644 index 00000000000..07664814bb1 --- /dev/null +++ b/drivers/video/mb862xx/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for the MB862xx framebuffer driver +# + +obj-$(CONFIG_FB_MB862XX) := mb862xxfb.o diff --git a/drivers/video/mb862xx/mb862xx_reg.h b/drivers/video/mb862xx/mb862xx_reg.h new file mode 100644 index 00000000000..2ba65e11850 --- /dev/null +++ b/drivers/video/mb862xx/mb862xx_reg.h @@ -0,0 +1,138 @@ +/* + * Fujitsu MB862xx Graphics Controller Registers/Bits + */ + +#ifndef _MB862XX_REG_H +#define _MB862XX_REG_H + +#ifdef MB862XX_MMIO_BOTTOM +#define MB862XX_MMIO_BASE 0x03fc0000 +#else +#define MB862XX_MMIO_BASE 0x01fc0000 +#endif +#define MB862XX_I2C_BASE 0x0000c000 +#define MB862XX_DISP_BASE 0x00010000 +#define MB862XX_CAP_BASE 0x00018000 +#define MB862XX_DRAW_BASE 0x00030000 +#define MB862XX_GEO_BASE 0x00038000 +#define MB862XX_PIO_BASE 0x00038000 +#define MB862XX_MMIO_SIZE 0x40000 + +/* Host interface/pio registers */ +#define GC_IST 0x00000020 +#define GC_IMASK 0x00000024 +#define GC_SRST 0x0000002c +#define GC_CCF 0x00000038 +#define GC_CID 0x000000f0 +#define GC_REVISION 0x00000084 + +#define GC_CCF_CGE_100 0x00000000 +#define GC_CCF_CGE_133 0x00040000 +#define GC_CCF_CGE_166 0x00080000 +#define GC_CCF_COT_100 0x00000000 +#define GC_CCF_COT_133 0x00010000 +#define GC_CID_CNAME_MSK 0x0000ff00 +#define GC_CID_VERSION_MSK 0x000000ff + +/* define enabled interrupts hereby */ +#define GC_INT_EN 0x00000000 + +/* Memory interface mode register */ +#define GC_MMR 0x0000fffc + +/* Display Controller registers */ +#define GC_DCM0 0x00000000 +#define GC_HTP 0x00000004 +#define GC_HDB_HDP 0x00000008 +#define GC_VSW_HSW_HSP 0x0000000c +#define GC_VTR 0x00000010 +#define GC_VDP_VSP 0x00000014 +#define GC_WY_WX 0x00000018 +#define GC_WH_WW 0x0000001c +#define GC_L0M 0x00000020 +#define GC_L0OA0 0x00000024 +#define GC_L0DA0 0x00000028 +#define GC_L0DY_L0DX 0x0000002c +#define GC_DCM1 0x00000100 +#define GC_L0EM 0x00000110 +#define GC_L0WY_L0WX 0x00000114 +#define GC_L0WH_L0WW 0x00000118 +#define GC_DCM2 0x00000104 +#define GC_DCM3 0x00000108 +#define GC_CPM_CUTC 0x000000a0 +#define GC_CUOA0 0x000000a4 +#define GC_CUY0_CUX0 0x000000a8 +#define GC_CUOA1 0x000000ac +#define GC_CUY1_CUX1 0x000000b0 +#define GC_L0PAL0 0x00000400 + +#define GC_CPM_CEN0 0x00100000 +#define GC_CPM_CEN1 0x00200000 + +#define GC_DCM01_ESY 0x00000004 +#define GC_DCM01_SC 0x00003f00 +#define GC_DCM01_RESV 0x00004000 +#define GC_DCM01_CKS 0x00008000 +#define GC_DCM01_L0E 0x00010000 +#define GC_DCM01_DEN 0x80000000 +#define GC_L0M_L0C_8 0x00000000 +#define GC_L0M_L0C_16 0x80000000 +#define GC_L0EM_L0EC_24 0x40000000 +#define GC_L0M_L0W_UNIT 64 + +#define GC_DISP_REFCLK_400 400 + +/* Carmine specific */ +#define MB86297_DRAW_BASE 0x00020000 +#define MB86297_DISP0_BASE 0x00100000 +#define MB86297_DISP1_BASE 0x00140000 +#define MB86297_WRBACK_BASE 0x00180000 +#define MB86297_CAP0_BASE 0x00200000 +#define MB86297_CAP1_BASE 0x00280000 +#define MB86297_DRAMCTRL_BASE 0x00300000 +#define MB86297_CTRL_BASE 0x00400000 +#define MB86297_I2C_BASE 0x00500000 + +#define GC_CTRL_STATUS 0x00000000 +#define GC_CTRL_INT_MASK 0x00000004 +#define GC_CTRL_CLK_ENABLE 0x0000000c +#define GC_CTRL_SOFT_RST 0x00000010 + +#define GC_CTRL_CLK_EN_DRAM 0x00000001 +#define GC_CTRL_CLK_EN_2D3D 0x00000002 +#define GC_CTRL_CLK_EN_DISP0 0x00000020 +#define GC_CTRL_CLK_EN_DISP1 0x00000040 + +#define GC_2D3D_REV 0x000004b4 +#define GC_RE_REVISION 0x24240200 + +/* define enabled interrupts hereby */ +#define GC_CARMINE_INT_EN 0x00000004 + +/* DRAM controller */ +#define GC_DCTL_MODE_ADD 0x00000000 +#define GC_DCTL_SETTIME1_EMODE 0x00000004 +#define GC_DCTL_REFRESH_SETTIME2 0x00000008 +#define GC_DCTL_RSV0_STATES 0x0000000C +#define GC_DCTL_RSV2_RSV1 0x00000010 +#define GC_DCTL_DDRIF2_DDRIF1 0x00000014 +#define GC_DCTL_IOCONT1_IOCONT0 0x00000024 + +#define GC_DCTL_STATES_MSK 0x0000000f +#define GC_DCTL_INIT_WAIT_CNT 3000 +#define GC_DCTL_INIT_WAIT_INTERVAL 1 + +/* DRAM ctrl values for Carmine PCI Eval. board */ +#define GC_EVB_DCTL_MODE_ADD 0x012105c3 +#define GC_EVB_DCTL_MODE_ADD_AFT_RST 0x002105c3 +#define GC_EVB_DCTL_SETTIME1_EMODE 0x47498000 +#define GC_EVB_DCTL_REFRESH_SETTIME2 0x00422a22 +#define GC_EVB_DCTL_RSV0_STATES 0x00200003 +#define GC_EVB_DCTL_RSV0_STATES_AFT_RST 0x00200002 +#define GC_EVB_DCTL_RSV2_RSV1 0x0000000f +#define GC_EVB_DCTL_DDRIF2_DDRIF1 0x00556646 +#define GC_EVB_DCTL_IOCONT1_IOCONT0 0x05550555 + +#define GC_DISP_REFCLK_533 533 + +#endif diff --git a/drivers/video/mb862xx/mb862xxfb.c b/drivers/video/mb862xx/mb862xxfb.c new file mode 100644 index 00000000000..38718d95fbb --- /dev/null +++ b/drivers/video/mb862xx/mb862xxfb.c @@ -0,0 +1,1061 @@ +/* + * drivers/mb862xx/mb862xxfb.c + * + * Fujitsu Carmine/Coral-P(A)/Lime framebuffer driver + * + * (C) 2008 Anatolij Gustschin <agust@denx.de> + * DENX Software Engineering + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#undef DEBUG + +#include <linux/fb.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/pci.h> +#if defined(CONFIG_PPC_OF) +#include <linux/of_platform.h> +#endif +#include "mb862xxfb.h" +#include "mb862xx_reg.h" + +#define NR_PALETTE 256 +#define MB862XX_MEM_SIZE 0x1000000 +#define CORALP_MEM_SIZE 0x4000000 +#define CARMINE_MEM_SIZE 0x8000000 +#define DRV_NAME "mb862xxfb" + +#if defined(CONFIG_LWMON5) +static struct mb862xx_gc_mode lwmon5_gc_mode = { + /* Mode for Sharp LQ104V1DG61 TFT LCD Panel */ + { "640x480", 60, 640, 480, 40000, 48, 16, 32, 11, 96, 2, 0, 0, 0 }, + /* 16 bits/pixel, 32MB, 100MHz, SDRAM memory mode value */ + 16, 0x2000000, GC_CCF_COT_100, 0x414fb7f2 +}; +#endif + +#if defined(CONFIG_SOCRATES) +static struct mb862xx_gc_mode socrates_gc_mode = { + /* Mode for Prime View PM070WL4 TFT LCD Panel */ + { "800x480", 45, 800, 480, 40000, 86, 42, 33, 10, 128, 2, 0, 0, 0 }, + /* 16 bits/pixel, 16MB, 133MHz, SDRAM memory mode value */ + 16, 0x1000000, GC_CCF_COT_133, 0x4157ba63 +}; +#endif + +/* Helpers */ +static inline int h_total(struct fb_var_screeninfo *var) +{ + return var->xres + var->left_margin + + var->right_margin + var->hsync_len; +} + +static inline int v_total(struct fb_var_screeninfo *var) +{ + return var->yres + var->upper_margin + + var->lower_margin + var->vsync_len; +} + +static inline int hsp(struct fb_var_screeninfo *var) +{ + return var->xres + var->right_margin - 1; +} + +static inline int vsp(struct fb_var_screeninfo *var) +{ + return var->yres + var->lower_margin - 1; +} + +static inline int d_pitch(struct fb_var_screeninfo *var) +{ + return var->xres * var->bits_per_pixel / 8; +} + +static inline unsigned int chan_to_field(unsigned int chan, + struct fb_bitfield *bf) +{ + chan &= 0xffff; + chan >>= 16 - bf->length; + return chan << bf->offset; +} + +static int mb862xxfb_setcolreg(unsigned regno, + unsigned red, unsigned green, unsigned blue, + unsigned transp, struct fb_info *info) +{ + struct mb862xxfb_par *par = info->par; + unsigned int val; + + switch (info->fix.visual) { + case FB_VISUAL_TRUECOLOR: + if (regno < 16) { + val = chan_to_field(red, &info->var.red); + val |= chan_to_field(green, &info->var.green); + val |= chan_to_field(blue, &info->var.blue); + par->pseudo_palette[regno] = val; + } + break; + case FB_VISUAL_PSEUDOCOLOR: + if (regno < 256) { + val = (red >> 8) << 16; + val |= (green >> 8) << 8; + val |= blue >> 8; + outreg(disp, GC_L0PAL0 + (regno * 4), val); + } + break; + default: + return 1; /* unsupported type */ + } + return 0; +} + +static int mb862xxfb_check_var(struct fb_var_screeninfo *var, + struct fb_info *fbi) +{ + unsigned long tmp; + + if (fbi->dev) + dev_dbg(fbi->dev, "%s\n", __func__); + + /* check if these values fit into the registers */ + if (var->hsync_len > 255 || var->vsync_len > 255) + return -EINVAL; + + if ((var->xres + var->right_margin) >= 4096) + return -EINVAL; + + if ((var->yres + var->lower_margin) > 4096) + return -EINVAL; + + if (h_total(var) > 4096 || v_total(var) > 4096) + return -EINVAL; + + if (var->xres_virtual > 4096 || var->yres_virtual > 4096) + return -EINVAL; + + if (var->bits_per_pixel <= 8) + var->bits_per_pixel = 8; + else if (var->bits_per_pixel <= 16) + var->bits_per_pixel = 16; + else if (var->bits_per_pixel <= 32) + var->bits_per_pixel = 32; + + /* + * can cope with 8,16 or 24/32bpp if resulting + * pitch is divisible by 64 without remainder + */ + if (d_pitch(&fbi->var) % GC_L0M_L0W_UNIT) { + int r; + + var->bits_per_pixel = 0; + do { + var->bits_per_pixel += 8; + r = d_pitch(&fbi->var) % GC_L0M_L0W_UNIT; + } while (r && var->bits_per_pixel <= 32); + + if (d_pitch(&fbi->var) % GC_L0M_L0W_UNIT) + return -EINVAL; + } + + /* line length is going to be 128 bit aligned */ + tmp = (var->xres * var->bits_per_pixel) / 8; + if ((tmp & 15) != 0) + return -EINVAL; + + /* set r/g/b positions and validate bpp */ + switch (var->bits_per_pixel) { + case 8: + var->red.length = var->bits_per_pixel; + var->green.length = var->bits_per_pixel; + var->blue.length = var->bits_per_pixel; + var->red.offset = 0; + var->green.offset = 0; + var->blue.offset = 0; + var->transp.length = 0; + break; + case 16: + var->red.length = 5; + var->green.length = 5; + var->blue.length = 5; + var->red.offset = 10; + var->green.offset = 5; + var->blue.offset = 0; + var->transp.length = 0; + break; + case 24: + case 32: + var->transp.length = 8; + var->red.length = 8; + var->green.length = 8; + var->blue.length = 8; + var->transp.offset = 24; + var->red.offset = 16; + var->green.offset = 8; + var->blue.offset = 0; + break; + default: + return -EINVAL; + } + return 0; +} + +/* + * set display parameters + */ +static int mb862xxfb_set_par(struct fb_info *fbi) +{ + struct mb862xxfb_par *par = fbi->par; + unsigned long reg, sc; + + dev_dbg(par->dev, "%s\n", __func__); + + if (par->pre_init) + return 0; + + /* disp off */ + reg = inreg(disp, GC_DCM1); + reg &= ~GC_DCM01_DEN; + outreg(disp, GC_DCM1, reg); + + /* set display reference clock div. */ + sc = par->refclk / (1000000 / fbi->var.pixclock) - 1; + reg = inreg(disp, GC_DCM1); + reg &= ~(GC_DCM01_CKS | GC_DCM01_RESV | GC_DCM01_SC); + reg |= sc << 8; + outreg(disp, GC_DCM1, reg); + dev_dbg(par->dev, "SC 0x%lx\n", sc); + + /* disp dimension, format */ + reg = pack(d_pitch(&fbi->var) / GC_L0M_L0W_UNIT, + (fbi->var.yres - 1)); + if (fbi->var.bits_per_pixel == 16) + reg |= GC_L0M_L0C_16; + outreg(disp, GC_L0M, reg); + + if (fbi->var.bits_per_pixel == 32) { + reg = inreg(disp, GC_L0EM); + outreg(disp, GC_L0EM, reg | GC_L0EM_L0EC_24); + } + outreg(disp, GC_WY_WX, 0); + reg = pack(fbi->var.yres - 1, fbi->var.xres); + outreg(disp, GC_WH_WW, reg); + outreg(disp, GC_L0OA0, 0); + outreg(disp, GC_L0DA0, 0); + outreg(disp, GC_L0DY_L0DX, 0); + outreg(disp, GC_L0WY_L0WX, 0); + outreg(disp, GC_L0WH_L0WW, reg); + + /* both HW-cursors off */ + reg = inreg(disp, GC_CPM_CUTC); + reg &= ~(GC_CPM_CEN0 | GC_CPM_CEN1); + outreg(disp, GC_CPM_CUTC, reg); + + /* timings */ + reg = pack(fbi->var.xres - 1, fbi->var.xres - 1); + outreg(disp, GC_HDB_HDP, reg); + reg = pack((fbi->var.yres - 1), vsp(&fbi->var)); + outreg(disp, GC_VDP_VSP, reg); + reg = ((fbi->var.vsync_len - 1) << 24) | + pack((fbi->var.hsync_len - 1), hsp(&fbi->var)); + outreg(disp, GC_VSW_HSW_HSP, reg); + outreg(disp, GC_HTP, pack(h_total(&fbi->var) - 1, 0)); + outreg(disp, GC_VTR, pack(v_total(&fbi->var) - 1, 0)); + + /* display on */ + reg = inreg(disp, GC_DCM1); + reg |= GC_DCM01_DEN | GC_DCM01_L0E; + reg &= ~GC_DCM01_ESY; + outreg(disp, GC_DCM1, reg); + return 0; +} + +static int mb862xxfb_pan(struct fb_var_screeninfo *var, + struct fb_info *info) +{ + struct mb862xxfb_par *par = info->par; + unsigned long reg; + + reg = pack(var->yoffset, var->xoffset); + outreg(disp, GC_L0WY_L0WX, reg); + + reg = pack(var->yres_virtual, var->xres_virtual); + outreg(disp, GC_L0WH_L0WW, reg); + return 0; +} + +static int mb862xxfb_blank(int mode, struct fb_info *fbi) +{ + struct mb862xxfb_par *par = fbi->par; + unsigned long reg; + + dev_dbg(fbi->dev, "blank mode=%d\n", mode); + + switch (mode) { + case FB_BLANK_POWERDOWN: + reg = inreg(disp, GC_DCM1); + reg &= ~GC_DCM01_DEN; + outreg(disp, GC_DCM1, reg); + break; + case FB_BLANK_UNBLANK: + reg = inreg(disp, GC_DCM1); + reg |= GC_DCM01_DEN; + outreg(disp, GC_DCM1, reg); + break; + case FB_BLANK_NORMAL: + case FB_BLANK_VSYNC_SUSPEND: + case FB_BLANK_HSYNC_SUSPEND: + default: + return 1; + } + return 0; +} + +/* framebuffer ops */ +static struct fb_ops mb862xxfb_ops = { + .owner = THIS_MODULE, + .fb_check_var = mb862xxfb_check_var, + .fb_set_par = mb862xxfb_set_par, + .fb_setcolreg = mb862xxfb_setcolreg, + .fb_blank = mb862xxfb_blank, + .fb_pan_display = mb862xxfb_pan, + .fb_fillrect = cfb_fillrect, + .fb_copyarea = cfb_copyarea, + .fb_imageblit = cfb_imageblit, +}; + +/* initialize fb_info data */ +static int mb862xxfb_init_fbinfo(struct fb_info *fbi) +{ + struct mb862xxfb_par *par = fbi->par; + struct mb862xx_gc_mode *mode = par->gc_mode; + unsigned long reg; + + fbi->fbops = &mb862xxfb_ops; + fbi->pseudo_palette = par->pseudo_palette; + fbi->screen_base = par->fb_base; + fbi->screen_size = par->mapped_vram; + + strcpy(fbi->fix.id, DRV_NAME); + fbi->fix.smem_start = (unsigned long)par->fb_base_phys; + fbi->fix.smem_len = par->mapped_vram; + fbi->fix.mmio_start = (unsigned long)par->mmio_base_phys; + fbi->fix.mmio_len = par->mmio_len; + fbi->fix.accel = FB_ACCEL_NONE; + fbi->fix.type = FB_TYPE_PACKED_PIXELS; + fbi->fix.type_aux = 0; + fbi->fix.xpanstep = 1; + fbi->fix.ypanstep = 1; + fbi->fix.ywrapstep = 0; + + reg = inreg(disp, GC_DCM1); + if (reg & GC_DCM01_DEN && reg & GC_DCM01_L0E) { + /* get the disp mode from active display cfg */ + unsigned long sc = ((reg & GC_DCM01_SC) >> 8) + 1; + unsigned long hsp, vsp, ht, vt; + + dev_dbg(par->dev, "using bootloader's disp. mode\n"); + fbi->var.pixclock = (sc * 1000000) / par->refclk; + fbi->var.xres = (inreg(disp, GC_HDB_HDP) & 0x0fff) + 1; + reg = inreg(disp, GC_VDP_VSP); + fbi->var.yres = ((reg >> 16) & 0x0fff) + 1; + vsp = (reg & 0x0fff) + 1; + fbi->var.xres_virtual = fbi->var.xres; + fbi->var.yres_virtual = fbi->var.yres; + reg = inreg(disp, GC_L0EM); + if (reg & GC_L0EM_L0EC_24) { + fbi->var.bits_per_pixel = 32; + } else { + reg = inreg(disp, GC_L0M); + if (reg & GC_L0M_L0C_16) + fbi->var.bits_per_pixel = 16; + else + fbi->var.bits_per_pixel = 8; + } + reg = inreg(disp, GC_VSW_HSW_HSP); + fbi->var.hsync_len = ((reg & 0xff0000) >> 16) + 1; + fbi->var.vsync_len = ((reg & 0x3f000000) >> 24) + 1; + hsp = (reg & 0xffff) + 1; + ht = ((inreg(disp, GC_HTP) & 0xfff0000) >> 16) + 1; + fbi->var.right_margin = hsp - fbi->var.xres; + fbi->var.left_margin = ht - hsp - fbi->var.hsync_len; + vt = ((inreg(disp, GC_VTR) & 0xfff0000) >> 16) + 1; + fbi->var.lower_margin = vsp - fbi->var.yres; + fbi->var.upper_margin = vt - vsp - fbi->var.vsync_len; + } else if (mode) { + dev_dbg(par->dev, "using supplied mode\n"); + fb_videomode_to_var(&fbi->var, (struct fb_videomode *)mode); + fbi->var.bits_per_pixel = mode->def_bpp ? mode->def_bpp : 8; + } else { + int ret; + + ret = fb_find_mode(&fbi->var, fbi, "640x480-16@60", + NULL, 0, NULL, 16); + if (ret == 0 || ret == 4) { + dev_err(par->dev, + "failed to get initial mode\n"); + return -EINVAL; + } + } + + fbi->var.xoffset = 0; + fbi->var.yoffset = 0; + fbi->var.grayscale = 0; + fbi->var.nonstd = 0; + fbi->var.height = -1; + fbi->var.width = -1; + fbi->var.accel_flags = 0; + fbi->var.vmode = FB_VMODE_NONINTERLACED; + fbi->var.activate = FB_ACTIVATE_NOW; + fbi->flags = FBINFO_DEFAULT | +#ifdef __BIG_ENDIAN + FBINFO_FOREIGN_ENDIAN | +#endif + FBINFO_HWACCEL_XPAN | + FBINFO_HWACCEL_YPAN; + + /* check and possibly fix bpp */ + if ((fbi->fbops->fb_check_var)(&fbi->var, fbi)) + dev_err(par->dev, "check_var() failed on initial setup?\n"); + + fbi->fix.visual = fbi->var.bits_per_pixel == 8 ? + FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_TRUECOLOR; + fbi->fix.line_length = (fbi->var.xres_virtual * + fbi->var.bits_per_pixel) / 8; + return 0; +} + +/* + * show some display controller and cursor registers + */ +static ssize_t mb862xxfb_show_dispregs(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct fb_info *fbi = dev_get_drvdata(dev); + struct mb862xxfb_par *par = fbi->par; + char *ptr = buf; + unsigned int reg; + + for (reg = GC_DCM0; reg <= GC_L0DY_L0DX; reg += 4) + ptr += sprintf(ptr, "%08x = %08x\n", + reg, inreg(disp, reg)); + + for (reg = GC_CPM_CUTC; reg <= GC_CUY1_CUX1; reg += 4) + ptr += sprintf(ptr, "%08x = %08x\n", + reg, inreg(disp, reg)); + + for (reg = GC_DCM1; reg <= GC_L0WH_L0WW; reg += 4) + ptr += sprintf(ptr, "%08x = %08x\n", + reg, inreg(disp, reg)); + + return ptr - buf; +} + +static DEVICE_ATTR(dispregs, 0444, mb862xxfb_show_dispregs, NULL); + +irqreturn_t mb862xx_intr(int irq, void *dev_id) +{ + struct mb862xxfb_par *par = (struct mb862xxfb_par *) dev_id; + unsigned long reg_ist, mask; + + if (!par) + return IRQ_NONE; + + if (par->type == BT_CARMINE) { + /* Get Interrupt Status */ + reg_ist = inreg(ctrl, GC_CTRL_STATUS); + mask = inreg(ctrl, GC_CTRL_INT_MASK); + if (reg_ist == 0) + return IRQ_HANDLED; + + reg_ist &= mask; + if (reg_ist == 0) + return IRQ_HANDLED; + + /* Clear interrupt status */ + outreg(ctrl, 0x0, reg_ist); + } else { + /* Get status */ + reg_ist = inreg(host, GC_IST); + mask = inreg(host, GC_IMASK); + + reg_ist &= mask; + if (reg_ist == 0) + return IRQ_HANDLED; + + /* Clear status */ + outreg(host, GC_IST, ~reg_ist); + } + return IRQ_HANDLED; +} + +#if defined(CONFIG_FB_MB862XX_LIME) +/* + * GDC (Lime, Coral(B/Q), Mint, ...) on host bus + */ +static int mb862xx_gdc_init(struct mb862xxfb_par *par) +{ + unsigned long ccf, mmr; + unsigned long ver, rev; + + if (!par) + return -ENODEV; + +#if defined(CONFIG_FB_PRE_INIT_FB) + par->pre_init = 1; +#endif + par->host = par->mmio_base; + par->i2c = par->mmio_base + MB862XX_I2C_BASE; + par->disp = par->mmio_base + MB862XX_DISP_BASE; + par->cap = par->mmio_base + MB862XX_CAP_BASE; + par->draw = par->mmio_base + MB862XX_DRAW_BASE; + par->geo = par->mmio_base + MB862XX_GEO_BASE; + par->pio = par->mmio_base + MB862XX_PIO_BASE; + + par->refclk = GC_DISP_REFCLK_400; + + ver = inreg(host, GC_CID); + rev = inreg(pio, GC_REVISION); + if ((ver == 0x303) && (rev & 0xffffff00) == 0x20050100) { + dev_info(par->dev, "Fujitsu Lime v1.%d found\n", + (int)rev & 0xff); + par->type = BT_LIME; + ccf = par->gc_mode ? par->gc_mode->ccf : GC_CCF_COT_100; + mmr = par->gc_mode ? par->gc_mode->mmr : 0x414fb7f2; + } else { + dev_info(par->dev, "? GDC, CID/Rev.: 0x%lx/0x%lx \n", ver, rev); + return -ENODEV; + } + + if (!par->pre_init) { + outreg(host, GC_CCF, ccf); + udelay(200); + outreg(host, GC_MMR, mmr); + udelay(10); + } + + /* interrupt status */ + outreg(host, GC_IST, 0); + outreg(host, GC_IMASK, GC_INT_EN); + return 0; +} + +static int __devinit of_platform_mb862xx_probe(struct of_device *ofdev, + const struct of_device_id *id) +{ + struct device_node *np = ofdev->node; + struct device *dev = &ofdev->dev; + struct mb862xxfb_par *par; + struct fb_info *info; + struct resource res; + resource_size_t res_size; + unsigned long ret = -ENODEV; + + if (of_address_to_resource(np, 0, &res)) { + dev_err(dev, "Invalid address\n"); + return -ENXIO; + } + + info = framebuffer_alloc(sizeof(struct mb862xxfb_par), dev); + if (info == NULL) { + dev_err(dev, "cannot allocate framebuffer\n"); + return -ENOMEM; + } + + par = info->par; + par->info = info; + par->dev = dev; + + par->irq = irq_of_parse_and_map(np, 0); + if (par->irq == NO_IRQ) { + dev_err(dev, "failed to map irq\n"); + ret = -ENODEV; + goto fbrel; + } + + res_size = 1 + res.end - res.start; + par->res = request_mem_region(res.start, res_size, DRV_NAME); + if (par->res == NULL) { + dev_err(dev, "Cannot claim framebuffer/mmio\n"); + ret = -ENXIO; + goto irqdisp; + } + +#if defined(CONFIG_LWMON5) + par->gc_mode = &lwmon5_gc_mode; +#endif + +#if defined(CONFIG_SOCRATES) + par->gc_mode = &socrates_gc_mode; +#endif + + par->fb_base_phys = res.start; + par->mmio_base_phys = res.start + MB862XX_MMIO_BASE; + par->mmio_len = MB862XX_MMIO_SIZE; + if (par->gc_mode) + par->mapped_vram = par->gc_mode->max_vram; + else + par->mapped_vram = MB862XX_MEM_SIZE; + + par->fb_base = ioremap(par->fb_base_phys, par->mapped_vram); + if (par->fb_base == NULL) { + dev_err(dev, "Cannot map framebuffer\n"); + goto rel_reg; + } + + par->mmio_base = ioremap(par->mmio_base_phys, par->mmio_len); + if (par->mmio_base == NULL) { + dev_err(dev, "Cannot map registers\n"); + goto fb_unmap; + } + + dev_dbg(dev, "fb phys 0x%llx 0x%lx\n", + (u64)par->fb_base_phys, (ulong)par->mapped_vram); + dev_dbg(dev, "mmio phys 0x%llx 0x%lx, (irq = %d)\n", + (u64)par->mmio_base_phys, (ulong)par->mmio_len, par->irq); + + if (mb862xx_gdc_init(par)) + goto io_unmap; + + if (request_irq(par->irq, mb862xx_intr, IRQF_DISABLED, + DRV_NAME, (void *)par)) { + dev_err(dev, "Cannot request irq\n"); + goto io_unmap; + } + + mb862xxfb_init_fbinfo(info); + + if (fb_alloc_cmap(&info->cmap, NR_PALETTE, 0) < 0) { + dev_err(dev, "Could not allocate cmap for fb_info.\n"); + goto free_irq; + } + + if ((info->fbops->fb_set_par)(info)) + dev_err(dev, "set_var() failed on initial setup?\n"); + + if (register_framebuffer(info)) { + dev_err(dev, "failed to register framebuffer\n"); + goto rel_cmap; + } + + dev_set_drvdata(dev, info); + + if (device_create_file(dev, &dev_attr_dispregs)) + dev_err(dev, "Can't create sysfs regdump file\n"); + return 0; + +rel_cmap: + fb_dealloc_cmap(&info->cmap); +free_irq: + outreg(host, GC_IMASK, 0); + free_irq(par->irq, (void *)par); +io_unmap: + iounmap(par->mmio_base); +fb_unmap: + iounmap(par->fb_base); +rel_reg: + release_mem_region(res.start, res_size); +irqdisp: + irq_dispose_mapping(par->irq); +fbrel: + dev_set_drvdata(dev, NULL); + framebuffer_release(info); + return ret; +} + +static int __devexit of_platform_mb862xx_remove(struct of_device *ofdev) +{ + struct fb_info *fbi = dev_get_drvdata(&ofdev->dev); + struct mb862xxfb_par *par = fbi->par; + resource_size_t res_size = 1 + par->res->end - par->res->start; + unsigned long reg; + + dev_dbg(fbi->dev, "%s release\n", fbi->fix.id); + + /* display off */ + reg = inreg(disp, GC_DCM1); + reg &= ~(GC_DCM01_DEN | GC_DCM01_L0E); + outreg(disp, GC_DCM1, reg); + + /* disable interrupts */ + outreg(host, GC_IMASK, 0); + + free_irq(par->irq, (void *)par); + irq_dispose_mapping(par->irq); + + device_remove_file(&ofdev->dev, &dev_attr_dispregs); + + unregister_framebuffer(fbi); + fb_dealloc_cmap(&fbi->cmap); + + iounmap(par->mmio_base); + iounmap(par->fb_base); + + dev_set_drvdata(&ofdev->dev, NULL); + release_mem_region(par->res->start, res_size); + framebuffer_release(fbi); + return 0; +} + +/* + * common types + */ +static struct of_device_id __devinitdata of_platform_mb862xx_tbl[] = { + { .compatible = "fujitsu,MB86276", }, + { .compatible = "fujitsu,lime", }, + { .compatible = "fujitsu,MB86277", }, + { .compatible = "fujitsu,mint", }, + { .compatible = "fujitsu,MB86293", }, + { .compatible = "fujitsu,MB86294", }, + { .compatible = "fujitsu,coral", }, + { /* end */ } +}; + +static struct of_platform_driver of_platform_mb862xxfb_driver = { + .owner = THIS_MODULE, + .name = DRV_NAME, + .match_table = of_platform_mb862xx_tbl, + .probe = of_platform_mb862xx_probe, + .remove = __devexit_p(of_platform_mb862xx_remove), +}; +#endif + +#if defined(CONFIG_FB_MB862XX_PCI_GDC) +static int coralp_init(struct mb862xxfb_par *par) +{ + int cn, ver; + + par->host = par->mmio_base; + par->i2c = par->mmio_base + MB862XX_I2C_BASE; + par->disp = par->mmio_base + MB862XX_DISP_BASE; + par->cap = par->mmio_base + MB862XX_CAP_BASE; + par->draw = par->mmio_base + MB862XX_DRAW_BASE; + par->geo = par->mmio_base + MB862XX_GEO_BASE; + par->pio = par->mmio_base + MB862XX_PIO_BASE; + + par->refclk = GC_DISP_REFCLK_400; + + ver = inreg(host, GC_CID); + cn = (ver & GC_CID_CNAME_MSK) >> 8; + ver = ver & GC_CID_VERSION_MSK; + if (cn == 3) { + dev_info(par->dev, "Fujitsu Coral-%s GDC Rev.%d found\n",\ + (ver == 6) ? "P" : (ver == 8) ? "PA" : "?", + par->pdev->revision); + outreg(host, GC_CCF, GC_CCF_CGE_166 | GC_CCF_COT_133); + udelay(200); + outreg(host, GC_MMR, GC_MMR_CORALP_EVB_VAL); + udelay(10); + /* Clear interrupt status */ + outreg(host, GC_IST, 0); + } else { + return -ENODEV; + } + return 0; +} + +static int init_dram_ctrl(struct mb862xxfb_par *par) +{ + unsigned long i = 0; + + /* + * Set io mode first! Spec. says IC may be destroyed + * if not set to SSTL2/LVCMOS before init. + */ + outreg(dram_ctrl, GC_DCTL_IOCONT1_IOCONT0, GC_EVB_DCTL_IOCONT1_IOCONT0); + + /* DRAM init */ + outreg(dram_ctrl, GC_DCTL_MODE_ADD, GC_EVB_DCTL_MODE_ADD); + outreg(dram_ctrl, GC_DCTL_SETTIME1_EMODE, GC_EVB_DCTL_SETTIME1_EMODE); + outreg(dram_ctrl, GC_DCTL_REFRESH_SETTIME2, + GC_EVB_DCTL_REFRESH_SETTIME2); + outreg(dram_ctrl, GC_DCTL_RSV2_RSV1, GC_EVB_DCTL_RSV2_RSV1); + outreg(dram_ctrl, GC_DCTL_DDRIF2_DDRIF1, GC_EVB_DCTL_DDRIF2_DDRIF1); + outreg(dram_ctrl, GC_DCTL_RSV0_STATES, GC_EVB_DCTL_RSV0_STATES); + + /* DLL reset done? */ + while ((inreg(dram_ctrl, GC_DCTL_RSV0_STATES) & GC_DCTL_STATES_MSK)) { + udelay(GC_DCTL_INIT_WAIT_INTERVAL); + if (i++ > GC_DCTL_INIT_WAIT_CNT) { + dev_err(par->dev, "VRAM init failed.\n"); + return -EINVAL; + } + } + outreg(dram_ctrl, GC_DCTL_MODE_ADD, GC_EVB_DCTL_MODE_ADD_AFT_RST); + outreg(dram_ctrl, GC_DCTL_RSV0_STATES, GC_EVB_DCTL_RSV0_STATES_AFT_RST); + return 0; +} + +static int carmine_init(struct mb862xxfb_par *par) +{ + unsigned long reg; + + par->ctrl = par->mmio_base + MB86297_CTRL_BASE; + par->i2c = par->mmio_base + MB86297_I2C_BASE; + par->disp = par->mmio_base + MB86297_DISP0_BASE; + par->disp1 = par->mmio_base + MB86297_DISP1_BASE; + par->cap = par->mmio_base + MB86297_CAP0_BASE; + par->cap1 = par->mmio_base + MB86297_CAP1_BASE; + par->draw = par->mmio_base + MB86297_DRAW_BASE; + par->dram_ctrl = par->mmio_base + MB86297_DRAMCTRL_BASE; + par->wrback = par->mmio_base + MB86297_WRBACK_BASE; + + par->refclk = GC_DISP_REFCLK_533; + + /* warm up */ + reg = GC_CTRL_CLK_EN_DRAM | GC_CTRL_CLK_EN_2D3D | GC_CTRL_CLK_EN_DISP0; + outreg(ctrl, GC_CTRL_CLK_ENABLE, reg); + + /* check for engine module revision */ + if (inreg(draw, GC_2D3D_REV) == GC_RE_REVISION) + dev_info(par->dev, "Fujitsu Carmine GDC Rev.%d found\n", + par->pdev->revision); + else + goto err_init; + + reg &= ~GC_CTRL_CLK_EN_2D3D; + outreg(ctrl, GC_CTRL_CLK_ENABLE, reg); + + /* set up vram */ + if (init_dram_ctrl(par) < 0) + goto err_init; + + outreg(ctrl, GC_CTRL_INT_MASK, 0); + return 0; + +err_init: + outreg(ctrl, GC_CTRL_CLK_ENABLE, 0); + return -EINVAL; +} + +static inline int mb862xx_pci_gdc_init(struct mb862xxfb_par *par) +{ + switch (par->type) { + case BT_CORALP: + return coralp_init(par); + case BT_CARMINE: + return carmine_init(par); + default: + return -ENODEV; + } +} + +#define CHIP_ID(id) \ + { PCI_DEVICE(PCI_VENDOR_ID_FUJITSU_LIMITED, id) } + +static struct pci_device_id mb862xx_pci_tbl[] __devinitdata = { + /* MB86295/MB86296 */ + CHIP_ID(PCI_DEVICE_ID_FUJITSU_CORALP), + CHIP_ID(PCI_DEVICE_ID_FUJITSU_CORALPA), + /* MB86297 */ + CHIP_ID(PCI_DEVICE_ID_FUJITSU_CARMINE), + { 0, } +}; + +MODULE_DEVICE_TABLE(pci, mb862xx_pci_tbl); + +static int __devinit mb862xx_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct mb862xxfb_par *par; + struct fb_info *info; + struct device *dev = &pdev->dev; + int ret; + + ret = pci_enable_device(pdev); + if (ret < 0) { + dev_err(dev, "Cannot enable PCI device\n"); + goto out; + } + + info = framebuffer_alloc(sizeof(struct mb862xxfb_par), dev); + if (!info) { + dev_err(dev, "framebuffer alloc failed\n"); + ret = -ENOMEM; + goto dis_dev; + } + + par = info->par; + par->info = info; + par->dev = dev; + par->pdev = pdev; + par->irq = pdev->irq; + + ret = pci_request_regions(pdev, DRV_NAME); + if (ret < 0) { + dev_err(dev, "Cannot reserve region(s) for PCI device\n"); + goto rel_fb; + } + + switch (pdev->device) { + case PCI_DEVICE_ID_FUJITSU_CORALP: + case PCI_DEVICE_ID_FUJITSU_CORALPA: + par->fb_base_phys = pci_resource_start(par->pdev, 0); + par->mapped_vram = CORALP_MEM_SIZE; + par->mmio_base_phys = par->fb_base_phys + MB862XX_MMIO_BASE; + par->mmio_len = MB862XX_MMIO_SIZE; + par->type = BT_CORALP; + break; + case PCI_DEVICE_ID_FUJITSU_CARMINE: + par->fb_base_phys = pci_resource_start(par->pdev, 2); + par->mmio_base_phys = pci_resource_start(par->pdev, 3); + par->mmio_len = pci_resource_len(par->pdev, 3); + par->mapped_vram = CARMINE_MEM_SIZE; + par->type = BT_CARMINE; + break; + default: + /* should never occur */ + goto rel_reg; + } + + par->fb_base = ioremap(par->fb_base_phys, par->mapped_vram); + if (par->fb_base == NULL) { + dev_err(dev, "Cannot map framebuffer\n"); + goto rel_reg; + } + + par->mmio_base = ioremap(par->mmio_base_phys, par->mmio_len); + if (par->mmio_base == NULL) { + dev_err(dev, "Cannot map registers\n"); + ret = -EIO; + goto fb_unmap; + } + + dev_dbg(dev, "fb phys 0x%llx 0x%lx\n", + (u64)par->fb_base_phys, (ulong)par->mapped_vram); + dev_dbg(dev, "mmio phys 0x%llx 0x%lx\n", + (u64)par->mmio_base_phys, (ulong)par->mmio_len); + + if (mb862xx_pci_gdc_init(par)) + goto io_unmap; + + if (request_irq(par->irq, mb862xx_intr, IRQF_DISABLED | IRQF_SHARED, + DRV_NAME, (void *)par)) { + dev_err(dev, "Cannot request irq\n"); + goto io_unmap; + } + + mb862xxfb_init_fbinfo(info); + + if (fb_alloc_cmap(&info->cmap, NR_PALETTE, 0) < 0) { + dev_err(dev, "Could not allocate cmap for fb_info.\n"); + ret = -ENOMEM; + goto free_irq; + } + + if ((info->fbops->fb_set_par)(info)) + dev_err(dev, "set_var() failed on initial setup?\n"); + + ret = register_framebuffer(info); + if (ret < 0) { + dev_err(dev, "failed to register framebuffer\n"); + goto rel_cmap; + } + + pci_set_drvdata(pdev, info); + + if (device_create_file(dev, &dev_attr_dispregs)) + dev_err(dev, "Can't create sysfs regdump file\n"); + + if (par->type == BT_CARMINE) + outreg(ctrl, GC_CTRL_INT_MASK, GC_CARMINE_INT_EN); + else + outreg(host, GC_IMASK, GC_INT_EN); + + return 0; + +rel_cmap: + fb_dealloc_cmap(&info->cmap); +free_irq: + free_irq(par->irq, (void *)par); +io_unmap: + iounmap(par->mmio_base); +fb_unmap: + iounmap(par->fb_base); +rel_reg: + pci_release_regions(pdev); +rel_fb: + framebuffer_release(info); +dis_dev: + pci_disable_device(pdev); +out: + return ret; +} + +static void __devexit mb862xx_pci_remove(struct pci_dev *pdev) +{ + struct fb_info *fbi = pci_get_drvdata(pdev); + struct mb862xxfb_par *par = fbi->par; + unsigned long reg; + + dev_dbg(fbi->dev, "%s release\n", fbi->fix.id); + + /* display off */ + reg = inreg(disp, GC_DCM1); + reg &= ~(GC_DCM01_DEN | GC_DCM01_L0E); + outreg(disp, GC_DCM1, reg); + + if (par->type == BT_CARMINE) { + outreg(ctrl, GC_CTRL_INT_MASK, 0); + outreg(ctrl, GC_CTRL_CLK_ENABLE, 0); + } else { + outreg(host, GC_IMASK, 0); + } + + device_remove_file(&pdev->dev, &dev_attr_dispregs); + + pci_set_drvdata(pdev, NULL); + unregister_framebuffer(fbi); + fb_dealloc_cmap(&fbi->cmap); + + free_irq(par->irq, (void *)par); + iounmap(par->mmio_base); + iounmap(par->fb_base); + + pci_release_regions(pdev); + framebuffer_release(fbi); + pci_disable_device(pdev); +} + +static struct pci_driver mb862xxfb_pci_driver = { + .name = DRV_NAME, + .id_table = mb862xx_pci_tbl, + .probe = mb862xx_pci_probe, + .remove = __devexit_p(mb862xx_pci_remove), +}; +#endif + +static int __devinit mb862xxfb_init(void) +{ + int ret = -ENODEV; + +#if defined(CONFIG_FB_MB862XX_LIME) + ret = of_register_platform_driver(&of_platform_mb862xxfb_driver); +#endif +#if defined(CONFIG_FB_MB862XX_PCI_GDC) + ret = pci_register_driver(&mb862xxfb_pci_driver); +#endif + return ret; +} + +static void __exit mb862xxfb_exit(void) +{ +#if defined(CONFIG_FB_MB862XX_LIME) + of_unregister_platform_driver(&of_platform_mb862xxfb_driver); +#endif +#if defined(CONFIG_FB_MB862XX_PCI_GDC) + pci_unregister_driver(&mb862xxfb_pci_driver); +#endif +} + +module_init(mb862xxfb_init); +module_exit(mb862xxfb_exit); + +MODULE_DESCRIPTION("Fujitsu MB862xx Framebuffer driver"); +MODULE_AUTHOR("Anatolij Gustschin <agust@denx.de>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/video/mb862xx/mb862xxfb.h b/drivers/video/mb862xx/mb862xxfb.h new file mode 100644 index 00000000000..c4c8f4dd221 --- /dev/null +++ b/drivers/video/mb862xx/mb862xxfb.h @@ -0,0 +1,83 @@ +#ifndef __MB862XX_H__ +#define __MB862XX_H__ + +#define PCI_VENDOR_ID_FUJITSU_LIMITED 0x10cf +#define PCI_DEVICE_ID_FUJITSU_CORALP 0x2019 +#define PCI_DEVICE_ID_FUJITSU_CORALPA 0x201e +#define PCI_DEVICE_ID_FUJITSU_CARMINE 0x202b + +#define GC_MMR_CORALP_EVB_VAL 0x11d7fa13 + +enum gdctype { + BT_NONE, + BT_LIME, + BT_MINT, + BT_CORAL, + BT_CORALP, + BT_CARMINE, +}; + +struct mb862xx_gc_mode { + struct fb_videomode def_mode; /* mode of connected display */ + unsigned int def_bpp; /* default depth */ + unsigned long max_vram; /* connected SDRAM size */ + unsigned long ccf; /* gdc clk */ + unsigned long mmr; /* memory mode for SDRAM */ +}; + +/* private data */ +struct mb862xxfb_par { + struct fb_info *info; /* fb info head */ + struct device *dev; + struct pci_dev *pdev; + struct resource *res; /* framebuffer/mmio resource */ + + resource_size_t fb_base_phys; /* fb base, 36-bit PPC440EPx */ + resource_size_t mmio_base_phys; /* io base addr */ + void __iomem *fb_base; /* remapped framebuffer */ + void __iomem *mmio_base; /* remapped registers */ + size_t mapped_vram; /* length of remapped vram */ + size_t mmio_len; /* length of register region */ + + void __iomem *host; /* relocatable reg. bases */ + void __iomem *i2c; + void __iomem *disp; + void __iomem *disp1; + void __iomem *cap; + void __iomem *cap1; + void __iomem *draw; + void __iomem *geo; + void __iomem *pio; + void __iomem *ctrl; + void __iomem *dram_ctrl; + void __iomem *wrback; + + unsigned int irq; + unsigned int type; /* GDC type */ + unsigned int refclk; /* disp. reference clock */ + struct mb862xx_gc_mode *gc_mode; /* GDC mode init data */ + int pre_init; /* don't init display if 1 */ + + u32 pseudo_palette[16]; +}; + +#if defined(CONFIG_FB_MB862XX_LIME) && defined(CONFIG_FB_MB862XX_PCI_GDC) +#error "Select Lime GDC or CoralP/Carmine support, but not both together" +#endif +#if defined(CONFIG_FB_MB862XX_LIME) +#define gdc_read __raw_readl +#define gdc_write __raw_writel +#else +#define gdc_read readl +#define gdc_write writel +#endif + +#define inreg(type, off) \ + gdc_read((par->type + (off))) + +#define outreg(type, off, val) \ + gdc_write((val), (par->type + (off))) + +#define pack(a, b) (((a) << 16) | (b)) + +#endif diff --git a/drivers/video/via/global.h b/drivers/video/via/global.h index 8e5263c5b81..7543d5f7e30 100644 --- a/drivers/video/via/global.h +++ b/drivers/video/via/global.h @@ -38,7 +38,6 @@ #include "iface.h" #include "viafbdev.h" #include "chip.h" -#include "debug.h" #include "accel.h" #include "share.h" #include "dvi.h" @@ -48,12 +47,10 @@ #include "lcd.h" #include "ioctl.h" -#include "viamode.h" #include "via_utility.h" #include "vt1636.h" #include "tblDPASetting.h" #include "tbl1636.h" -#include "viafbdev.h" /* External struct*/ diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index 1a22fe782a2..4fd3fa5546b 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -67,11 +67,11 @@ config AT91RM9200_WATCHDOG system when the timeout is reached. config AT91SAM9X_WATCHDOG - tristate "AT91SAM9X watchdog" - depends on WATCHDOG && (ARCH_AT91SAM9260 || ARCH_AT91SAM9261) + tristate "AT91SAM9X / AT91CAP9 watchdog" + depends on ARCH_AT91 && !ARCH_AT91RM9200 help - Watchdog timer embedded into AT91SAM9X chips. This will reboot your - system when the timeout is reached. + Watchdog timer embedded into AT91SAM9X and AT91CAP9 chips. This will + reboot your system when the timeout is reached. config 21285_WATCHDOG tristate "DC21285 watchdog" diff --git a/drivers/watchdog/acquirewdt.c b/drivers/watchdog/acquirewdt.c index 6e46a551395..3e57aa4d643 100644 --- a/drivers/watchdog/acquirewdt.c +++ b/drivers/watchdog/acquirewdt.c @@ -3,8 +3,8 @@ * * Based on wdt.c. Original copyright messages: * - * (c) Copyright 1996 Alan Cox <alan@redhat.com>, All Rights Reserved. - * http://www.redhat.com + * (c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>, + * All Rights Reserved. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -15,7 +15,7 @@ * warranty for any of this software. This material is provided * "AS-IS" and at no charge. * - * (c) Copyright 1995 Alan Cox <alan@redhat.com> + * (c) Copyright 1995 Alan Cox <alan@lxorguk.ukuu.org.uk> * * 14-Dec-2001 Matt Domsch <Matt_Domsch@dell.com> * Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT diff --git a/drivers/watchdog/advantechwdt.c b/drivers/watchdog/advantechwdt.c index a5110f93a75..a1d7856ea6e 100644 --- a/drivers/watchdog/advantechwdt.c +++ b/drivers/watchdog/advantechwdt.c @@ -6,8 +6,8 @@ * Based on acquirewdt.c which is based on wdt.c. * Original copyright messages: * - * (c) Copyright 1996 Alan Cox <alan@redhat.com>, All Rights Reserved. - * http://www.redhat.com + * (c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>, + * All Rights Reserved. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -18,7 +18,7 @@ * warranty for any of this software. This material is provided * "AS-IS" and at no charge. * - * (c) Copyright 1995 Alan Cox <alan@redhat.com> + * (c) Copyright 1995 Alan Cox <alan@lxorguk.ukuu.org.uk> * * 14-Dec-2001 Matt Domsch <Matt_Domsch@dell.com> * Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT diff --git a/drivers/watchdog/at91sam9_wdt.c b/drivers/watchdog/at91sam9_wdt.c index b4babfc3158..b1da287f90e 100644 --- a/drivers/watchdog/at91sam9_wdt.c +++ b/drivers/watchdog/at91sam9_wdt.c @@ -30,7 +30,7 @@ #include <linux/bitops.h> #include <linux/uaccess.h> -#include <asm/arch/at91_wdt.h> +#include <mach/at91_wdt.h> #define DRV_NAME "AT91SAM9 Watchdog" diff --git a/drivers/watchdog/bfin_wdt.c b/drivers/watchdog/bfin_wdt.c index 31b42253054..067a57cb3f8 100644 --- a/drivers/watchdog/bfin_wdt.c +++ b/drivers/watchdog/bfin_wdt.c @@ -5,7 +5,7 @@ * Originally based on softdog.c * Copyright 2006-2007 Analog Devices Inc. * Copyright 2006-2007 Michele d'Amico - * Copyright 1996 Alan Cox <alan@redhat.com> + * Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk> * * Enter bugs at http://blackfin.uclinux.org/ * diff --git a/drivers/watchdog/eurotechwdt.c b/drivers/watchdog/eurotechwdt.c index bbd14e34319..a171fc6ae1c 100644 --- a/drivers/watchdog/eurotechwdt.c +++ b/drivers/watchdog/eurotechwdt.c @@ -8,8 +8,8 @@ * Based on wdt.c. * Original copyright messages: * - * (c) Copyright 1996-1997 Alan Cox <alan@redhat.com>, All Rights Reserved. - * http://www.redhat.com + * (c) Copyright 1996-1997 Alan Cox <alan@lxorguk.ukuu.org.uk>, + * All Rights Reserved. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License diff --git a/drivers/watchdog/i6300esb.c b/drivers/watchdog/i6300esb.c index c13383f7fcb..74f951c18b9 100644 --- a/drivers/watchdog/i6300esb.c +++ b/drivers/watchdog/i6300esb.c @@ -394,8 +394,7 @@ static unsigned char __init esb_getdevice(void) goto err_disable; } - BASEADDR = ioremap(pci_resource_start(esb_pci, 0), - pci_resource_len(esb_pci, 0)); + BASEADDR = pci_ioremap_bar(esb_pci, 0); if (BASEADDR == NULL) { /* Something's wrong here, BASEADDR has to be set */ printk(KERN_ERR PFX "failed to get BASEADDR\n"); diff --git a/drivers/watchdog/ib700wdt.c b/drivers/watchdog/ib700wdt.c index 8782ec1f5aa..317ef2b16cf 100644 --- a/drivers/watchdog/ib700wdt.c +++ b/drivers/watchdog/ib700wdt.c @@ -11,8 +11,8 @@ * Based on acquirewdt.c which is based on wdt.c. * Original copyright messages: * - * (c) Copyright 1996 Alan Cox <alan@redhat.com>, All Rights Reserved. - * http://www.redhat.com + * (c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>, + * All Rights Reserved. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -23,7 +23,7 @@ * warranty for any of this software. This material is provided * "AS-IS" and at no charge. * - * (c) Copyright 1995 Alan Cox <alan@redhat.com> + * (c) Copyright 1995 Alan Cox <alan@lxorguk.ukuu.org.uk> * * 14-Dec-2001 Matt Domsch <Matt_Domsch@dell.com> * Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT diff --git a/drivers/watchdog/indydog.c b/drivers/watchdog/indydog.c index 73c9e7992fe..0f761db9a27 100644 --- a/drivers/watchdog/indydog.c +++ b/drivers/watchdog/indydog.c @@ -9,7 +9,7 @@ * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. * - * based on softdog.c by Alan Cox <alan@redhat.com> + * based on softdog.c by Alan Cox <alan@lxorguk.ukuu.org.uk> */ #include <linux/module.h> diff --git a/drivers/watchdog/mpcore_wdt.c b/drivers/watchdog/mpcore_wdt.c index 2a9bfa81f9d..1130ad697ce 100644 --- a/drivers/watchdog/mpcore_wdt.c +++ b/drivers/watchdog/mpcore_wdt.c @@ -4,8 +4,8 @@ * (c) Copyright 2004 ARM Limited * * Based on the SoftDog driver: - * (c) Copyright 1996 Alan Cox <alan@redhat.com>, All Rights Reserved. - * http://www.redhat.com + * (c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>, + * All Rights Reserved. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License diff --git a/drivers/watchdog/omap_wdt.c b/drivers/watchdog/omap_wdt.c index 7bcbb7f4745..2f2ce7429f5 100644 --- a/drivers/watchdog/omap_wdt.c +++ b/drivers/watchdog/omap_wdt.c @@ -16,7 +16,7 @@ * 20030527: George G. Davis <gdavis@mvista.com> * Initially based on linux-2.4.19-rmk7-pxa1/drivers/char/sa1100_wdt.c * (c) Copyright 2000 Oleg Drokin <green@crimea.edu> - * Based on SoftDog driver by Alan Cox <alan@redhat.com> + * Based on SoftDog driver by Alan Cox <alan@lxorguk.ukuu.org.uk> * * Copyright (c) 2004 Texas Instruments. * 1. Modified to support OMAP1610 32-KHz watchdog timer diff --git a/drivers/watchdog/pcwd_pci.c b/drivers/watchdog/pcwd_pci.c index 90eb1d4271d..5d76422c402 100644 --- a/drivers/watchdog/pcwd_pci.c +++ b/drivers/watchdog/pcwd_pci.c @@ -6,7 +6,7 @@ * Based on source code of the following authors: * Ken Hollis <kenji@bitgate.com>, * Lindsay Harris <lindsay@bluegum.com>, - * Alan Cox <alan@redhat.com>, + * Alan Cox <alan@lxorguk.ukuu.org.uk>, * Matt Domsch <Matt_Domsch@dell.com>, * Rob Radez <rob@osinvestor.com> * diff --git a/drivers/watchdog/pcwd_usb.c b/drivers/watchdog/pcwd_usb.c index c1685c942de..afb089695da 100644 --- a/drivers/watchdog/pcwd_usb.c +++ b/drivers/watchdog/pcwd_usb.c @@ -5,7 +5,7 @@ * * Based on source code of the following authors: * Ken Hollis <kenji@bitgate.com>, - * Alan Cox <alan@redhat.com>, + * Alan Cox <alan@lxorguk.ukuu.org.uk>, * Matt Domsch <Matt_Domsch@dell.com>, * Rob Radez <rob@osinvestor.com>, * Greg Kroah-Hartman <greg@kroah.com> diff --git a/drivers/watchdog/rc32434_wdt.c b/drivers/watchdog/rc32434_wdt.c index c9c73b69c5e..57027f4653c 100644 --- a/drivers/watchdog/rc32434_wdt.c +++ b/drivers/watchdog/rc32434_wdt.c @@ -7,7 +7,8 @@ * based on * SoftDog 0.05: A Software Watchdog Device * - * (c) Copyright 1996 Alan Cox <alan@redhat.com>, All Rights Reserved. + * (c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>, + * All Rights Reserved. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c index 86d42801de4..f7f6ce82a5e 100644 --- a/drivers/watchdog/s3c2410_wdt.c +++ b/drivers/watchdog/s3c2410_wdt.c @@ -6,7 +6,7 @@ * S3C2410 Watchdog Timer Support * * Based on, softdog.c by Alan Cox, - * (c) Copyright 1996 Alan Cox <alan@redhat.com> + * (c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/watchdog/sa1100_wdt.c b/drivers/watchdog/sa1100_wdt.c index 31a48437dc3..ed01e4c2bef 100644 --- a/drivers/watchdog/sa1100_wdt.c +++ b/drivers/watchdog/sa1100_wdt.c @@ -2,7 +2,7 @@ * Watchdog driver for the SA11x0/PXA2xx * * (c) Copyright 2000 Oleg Drokin <green@crimea.edu> - * Based on SoftDog driver by Alan Cox <alan@redhat.com> + * Based on SoftDog driver by Alan Cox <alan@lxorguk.ukuu.org.uk> * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License diff --git a/drivers/watchdog/sb_wdog.c b/drivers/watchdog/sb_wdog.c index 27e526a07c9..38f5831c929 100644 --- a/drivers/watchdog/sb_wdog.c +++ b/drivers/watchdog/sb_wdog.c @@ -35,8 +35,8 @@ * Based on various other watchdog drivers, which are probably all * loosely based on something Alan Cox wrote years ago. * - * (c) Copyright 1996 Alan Cox <alan@redhat.com>, All Rights Reserved. - * http://www.redhat.com + * (c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>, + * All Rights Reserved. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License diff --git a/drivers/watchdog/sbc8360.c b/drivers/watchdog/sbc8360.c index fd83dd052d8..ae74f6bcfa2 100644 --- a/drivers/watchdog/sbc8360.c +++ b/drivers/watchdog/sbc8360.c @@ -16,8 +16,8 @@ * Based on acquirewdt.c which is based on wdt.c. * Original copyright messages: * - * (c) Copyright 1996 Alan Cox <alan@redhat.com>, All Rights Reserved. - * http://www.redhat.com + * (c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>, + * All Rights Reserved. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -28,7 +28,7 @@ * warranty for any of this software. This material is provided * "AS-IS" and at no charge. * - * (c) Copyright 1995 Alan Cox <alan@redhat.com> + * (c) Copyright 1995 Alan Cox <alan@lxorguk.ukuu.org.uk> * * 14-Dec-2001 Matt Domsch <Matt_Domsch@dell.com> * Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT diff --git a/drivers/watchdog/sbc_epx_c3.c b/drivers/watchdog/sbc_epx_c3.c index e5e470ca775..06553debc7b 100644 --- a/drivers/watchdog/sbc_epx_c3.c +++ b/drivers/watchdog/sbc_epx_c3.c @@ -10,7 +10,7 @@ * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. * - * based on softdog.c by Alan Cox <alan@redhat.com> + * based on softdog.c by Alan Cox <alan@lxorguk.ukuu.org.uk> */ #include <linux/module.h> diff --git a/drivers/watchdog/smsc37b787_wdt.c b/drivers/watchdog/smsc37b787_wdt.c index 988ff1d5b4b..2e56cad77d1 100644 --- a/drivers/watchdog/smsc37b787_wdt.c +++ b/drivers/watchdog/smsc37b787_wdt.c @@ -1,7 +1,7 @@ /* * SMsC 37B787 Watchdog Timer driver for Linux 2.6.x.x * - * Based on acquirewdt.c by Alan Cox <alan@redhat.com> + * Based on acquirewdt.c by Alan Cox <alan@lxorguk.ukuu.org.uk> * and some other existing drivers * * This program is free software; you can redistribute it and/or diff --git a/drivers/watchdog/softdog.c b/drivers/watchdog/softdog.c index c650464c5c6..7204f966211 100644 --- a/drivers/watchdog/softdog.c +++ b/drivers/watchdog/softdog.c @@ -1,8 +1,7 @@ /* * SoftDog 0.07: A Software Watchdog Device * - * (c) Copyright 1996 Alan Cox <alan@redhat.com>, All Rights Reserved. - * http://www.redhat.com + * (c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>, All Rights Reserved. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License diff --git a/drivers/watchdog/w83627hf_wdt.c b/drivers/watchdog/w83627hf_wdt.c index 69396adaa5c..916890abffd 100644 --- a/drivers/watchdog/w83627hf_wdt.c +++ b/drivers/watchdog/w83627hf_wdt.c @@ -11,8 +11,8 @@ * * (c) Copyright 2000-2001 Marek Michalkiewicz <marekm@linux.org.pl> * - * (c) Copyright 1996 Alan Cox <alan@redhat.com>, All Rights Reserved. - * http://www.redhat.com + * (c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>, + * All Rights Reserved. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -23,7 +23,7 @@ * warranty for any of this software. This material is provided * "AS-IS" and at no charge. * - * (c) Copyright 1995 Alan Cox <alan@redhat.com> + * (c) Copyright 1995 Alan Cox <alan@lxorguk.ukuu.org.uk> */ #include <linux/module.h> diff --git a/drivers/watchdog/w83697hf_wdt.c b/drivers/watchdog/w83697hf_wdt.c index 445d30a01ed..3c7aa412b1f 100644 --- a/drivers/watchdog/w83697hf_wdt.c +++ b/drivers/watchdog/w83697hf_wdt.c @@ -12,8 +12,8 @@ * * (c) Copyright 2000-2001 Marek Michalkiewicz <marekm@linux.org.pl> * - * (c) Copyright 1996 Alan Cox <alan@redhat.com>, All Rights Reserved. - * http://www.redhat.com + * (c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>, + * All Rights Reserved. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License diff --git a/drivers/watchdog/wafer5823wdt.c b/drivers/watchdog/wafer5823wdt.c index 68377ae171f..42e940c2389 100644 --- a/drivers/watchdog/wafer5823wdt.c +++ b/drivers/watchdog/wafer5823wdt.c @@ -10,8 +10,8 @@ * Based on advantechwdt.c which is based on wdt.c. * Original copyright messages: * - * (c) Copyright 1996-1997 Alan Cox <alan@redhat.com>, All Rights Reserved. - * http://www.redhat.com + * (c) Copyright 1996-1997 Alan Cox <alan@lxorguk.ukuu.org.uk>, + * All Rights Reserved. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License diff --git a/drivers/watchdog/wdt.c b/drivers/watchdog/wdt.c index deeebb2b13e..eddb9187e7b 100644 --- a/drivers/watchdog/wdt.c +++ b/drivers/watchdog/wdt.c @@ -1,8 +1,8 @@ /* * Industrial Computer Source WDT500/501 driver * - * (c) Copyright 1996-1997 Alan Cox <alan@redhat.com>, All Rights Reserved. - * http://www.redhat.com + * (c) Copyright 1996-1997 Alan Cox <alan@lxorguk.ukuu.org.uk>, + * All Rights Reserved. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License diff --git a/drivers/watchdog/wdt285.c b/drivers/watchdog/wdt285.c index 191ea630210..f55135662d7 100644 --- a/drivers/watchdog/wdt285.c +++ b/drivers/watchdog/wdt285.c @@ -6,7 +6,8 @@ * * SoftDog 0.05: A Software Watchdog Device * - * (c) Copyright 1996 Alan Cox <alan@redhat.com>, All Rights Reserved. + * (c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>, + * All Rights Reserved. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License diff --git a/drivers/watchdog/wdt_pci.c b/drivers/watchdog/wdt_pci.c index ed02bdb38c0..c45839a4a34 100644 --- a/drivers/watchdog/wdt_pci.c +++ b/drivers/watchdog/wdt_pci.c @@ -1,8 +1,8 @@ /* * Industrial Computer Source PCI-WDT500/501 driver * - * (c) Copyright 1996-1997 Alan Cox <alan@redhat.com>, All Rights Reserved. - * http://www.redhat.com + * (c) Copyright 1996-1997 Alan Cox <alan@lxorguk.ukuu.org.uk>, + * All Rights Reserved. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c index 8c83abc7340..a0fb5eac407 100644 --- a/drivers/xen/balloon.c +++ b/drivers/xen/balloon.c @@ -41,7 +41,6 @@ #include <linux/pagemap.h> #include <linux/highmem.h> #include <linux/mutex.h> -#include <linux/highmem.h> #include <linux/list.h> #include <linux/sysdev.h> diff --git a/drivers/xen/events.c b/drivers/xen/events.c index 9ce1ab6c268..1e3b934a4cf 100644 --- a/drivers/xen/events.c +++ b/drivers/xen/events.c @@ -774,7 +774,7 @@ void xen_poll_irq(int irq) poll.nr_ports = 1; poll.timeout = 0; - poll.ports = &evtchn; + set_xen_guest_handle(poll.ports, &evtchn); if (HYPERVISOR_sched_op(SCHEDOP_poll, &poll) != 0) BUG(); diff --git a/drivers/xen/manage.c b/drivers/xen/manage.c index d0e87cbe157..9b91617b958 100644 --- a/drivers/xen/manage.c +++ b/drivers/xen/manage.c @@ -39,8 +39,6 @@ static int xen_suspend(void *data) BUG_ON(!irqs_disabled()); - load_cr3(swapper_pg_dir); - err = device_power_down(PMSG_SUSPEND); if (err) { printk(KERN_ERR "xen_suspend: device_power_down failed: %d\n", diff --git a/drivers/xen/xencomm.c b/drivers/xen/xencomm.c index 797cb4e31f0..a240b2c20b9 100644 --- a/drivers/xen/xencomm.c +++ b/drivers/xen/xencomm.c @@ -23,13 +23,7 @@ #include <asm/page.h> #include <xen/xencomm.h> #include <xen/interface/xen.h> -#ifdef __ia64__ -#include <asm/xen/xencomm.h> /* for is_kern_addr() */ -#endif - -#ifdef HAVE_XEN_PLATFORM_COMPAT_H -#include <xen/platform-compat.h> -#endif +#include <asm/xen/xencomm.h> /* for xencomm_is_phys_contiguous() */ static int xencomm_init(struct xencomm_desc *desc, void *buffer, unsigned long bytes) @@ -157,20 +151,11 @@ static int xencomm_create(void *buffer, unsigned long bytes, return 0; } -/* check if memory address is within VMALLOC region */ -static int is_phys_contiguous(unsigned long addr) -{ - if (!is_kernel_addr(addr)) - return 0; - - return (addr < VMALLOC_START) || (addr >= VMALLOC_END); -} - static struct xencomm_handle *xencomm_create_inline(void *ptr) { unsigned long paddr; - BUG_ON(!is_phys_contiguous((unsigned long)ptr)); + BUG_ON(!xencomm_is_phys_contiguous((unsigned long)ptr)); paddr = (unsigned long)xencomm_pa(ptr); BUG_ON(paddr & XENCOMM_INLINE_FLAG); @@ -202,7 +187,7 @@ struct xencomm_handle *xencomm_map(void *ptr, unsigned long bytes) int rc; struct xencomm_desc *desc; - if (is_phys_contiguous((unsigned long)ptr)) + if (xencomm_is_phys_contiguous((unsigned long)ptr)) return xencomm_create_inline(ptr); rc = xencomm_create(ptr, bytes, &desc, GFP_KERNEL); @@ -219,7 +204,7 @@ struct xencomm_handle *__xencomm_map_no_alloc(void *ptr, unsigned long bytes, int rc; struct xencomm_desc *desc = NULL; - if (is_phys_contiguous((unsigned long)ptr)) + if (xencomm_is_phys_contiguous((unsigned long)ptr)) return xencomm_create_inline(ptr); rc = xencomm_create_mini(ptr, bytes, xc_desc, |