diff options
Diffstat (limited to 'drivers')
194 files changed, 6789 insertions, 4638 deletions
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index 80998958cf4..119d58db834 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -385,8 +385,8 @@ config ACPI_CUSTOM_METHOD to override that restriction). config ACPI_BGRT - tristate "Boottime Graphics Resource Table support" - default n + bool "Boottime Graphics Resource Table support" + depends on EFI help This driver adds support for exposing the ACPI Boottime Graphics Resource Table, which allows the operating system to obtain diff --git a/drivers/acpi/bgrt.c b/drivers/acpi/bgrt.c index 6680df36b96..be603995854 100644 --- a/drivers/acpi/bgrt.c +++ b/drivers/acpi/bgrt.c @@ -1,5 +1,6 @@ /* * Copyright 2012 Red Hat, Inc <mjg@redhat.com> + * Copyright 2012 Intel Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -11,20 +12,10 @@ #include <linux/init.h> #include <linux/device.h> #include <linux/sysfs.h> -#include <linux/io.h> -#include <acpi/acpi.h> -#include <acpi/acpi_bus.h> +#include <linux/efi-bgrt.h> -static struct acpi_table_bgrt *bgrt_tab; static struct kobject *bgrt_kobj; -struct bmp_header { - u16 id; - u32 size; -} __attribute ((packed)); - -static struct bmp_header bmp_header; - static ssize_t show_version(struct device *dev, struct device_attribute *attr, char *buf) { @@ -63,18 +54,7 @@ static DEVICE_ATTR(yoffset, S_IRUGO, show_yoffset, NULL); static ssize_t show_image(struct file *file, struct kobject *kobj, struct bin_attribute *attr, char *buf, loff_t off, size_t count) { - int size = attr->size; - void __iomem *image = attr->private; - - if (off >= size) { - count = 0; - } else { - if (off + count > size) - count = size - off; - - memcpy_fromio(buf, image+off, count); - } - + memcpy(buf, attr->private + off, count); return count; } @@ -101,45 +81,18 @@ static struct attribute_group bgrt_attribute_group = { static int __init bgrt_init(void) { - acpi_status status; int ret; - void __iomem *bgrt; - if (acpi_disabled) - return -ENODEV; - - status = acpi_get_table("BGRT", 0, - (struct acpi_table_header **)&bgrt_tab); - - if (ACPI_FAILURE(status)) + if (!bgrt_image) return -ENODEV; sysfs_bin_attr_init(&image_attr); - - bgrt = ioremap(bgrt_tab->image_address, sizeof(struct bmp_header)); - - if (!bgrt) { - ret = -EINVAL; - goto out_err; - } - - memcpy_fromio(&bmp_header, bgrt, sizeof(bmp_header)); - image_attr.size = bmp_header.size; - iounmap(bgrt); - - image_attr.private = ioremap(bgrt_tab->image_address, image_attr.size); - - if (!image_attr.private) { - ret = -EINVAL; - goto out_err; - } - + image_attr.private = bgrt_image; + image_attr.size = bgrt_image_size; bgrt_kobj = kobject_create_and_add("bgrt", acpi_kobj); - if (!bgrt_kobj) { - ret = -EINVAL; - goto out_iounmap; - } + if (!bgrt_kobj) + return -EINVAL; ret = sysfs_create_group(bgrt_kobj, &bgrt_attribute_group); if (ret) @@ -155,22 +108,11 @@ out_group: sysfs_remove_group(bgrt_kobj, &bgrt_attribute_group); out_kobject: kobject_put(bgrt_kobj); -out_iounmap: - iounmap(image_attr.private); -out_err: return ret; } -static void __exit bgrt_exit(void) -{ - iounmap(image_attr.private); - sysfs_remove_group(bgrt_kobj, &bgrt_attribute_group); - sysfs_remove_bin_file(bgrt_kobj, &image_attr); -} - module_init(bgrt_init); -module_exit(bgrt_exit); -MODULE_AUTHOR("Matthew Garrett"); +MODULE_AUTHOR("Matthew Garrett, Josh Triplett <josh@joshtriplett.org>"); MODULE_DESCRIPTION("BGRT boot graphic support"); MODULE_LICENSE("GPL"); diff --git a/drivers/base/regmap/regmap-irq.c b/drivers/base/regmap/regmap-irq.c index a89734621e5..5b6b1d8e6cc 100644 --- a/drivers/base/regmap/regmap-irq.c +++ b/drivers/base/regmap/regmap-irq.c @@ -16,12 +16,14 @@ #include <linux/irq.h> #include <linux/interrupt.h> #include <linux/irqdomain.h> +#include <linux/pm_runtime.h> #include <linux/slab.h> #include "internal.h" struct regmap_irq_chip_data { struct mutex lock; + struct irq_chip irq_chip; struct regmap *map; const struct regmap_irq_chip *chip; @@ -59,6 +61,14 @@ static void regmap_irq_sync_unlock(struct irq_data *data) struct regmap_irq_chip_data *d = irq_data_get_irq_chip_data(data); struct regmap *map = d->map; int i, ret; + u32 reg; + + if (d->chip->runtime_pm) { + ret = pm_runtime_get_sync(map->dev); + if (ret < 0) + dev_err(map->dev, "IRQ sync failed to resume: %d\n", + ret); + } /* * If there's been a change in the mask write it back to the @@ -66,15 +76,22 @@ static void regmap_irq_sync_unlock(struct irq_data *data) * suppress pointless writes. */ for (i = 0; i < d->chip->num_regs; i++) { - ret = regmap_update_bits(d->map, d->chip->mask_base + - (i * map->reg_stride * - d->irq_reg_stride), + reg = d->chip->mask_base + + (i * map->reg_stride * d->irq_reg_stride); + if (d->chip->mask_invert) + ret = regmap_update_bits(d->map, reg, + d->mask_buf_def[i], ~d->mask_buf[i]); + else + ret = regmap_update_bits(d->map, reg, d->mask_buf_def[i], d->mask_buf[i]); if (ret != 0) dev_err(d->map->dev, "Failed to sync masks in %x\n", - d->chip->mask_base + (i * map->reg_stride)); + reg); } + if (d->chip->runtime_pm) + pm_runtime_put(map->dev); + /* If we've changed our wakeup count propagate it to the parent */ if (d->wake_count < 0) for (i = d->wake_count; i < 0; i++) @@ -128,8 +145,7 @@ static int regmap_irq_set_wake(struct irq_data *data, unsigned int on) return 0; } -static struct irq_chip regmap_irq_chip = { - .name = "regmap", +static const struct irq_chip regmap_irq_chip = { .irq_bus_lock = regmap_irq_lock, .irq_bus_sync_unlock = regmap_irq_sync_unlock, .irq_disable = regmap_irq_disable, @@ -144,6 +160,16 @@ static irqreturn_t regmap_irq_thread(int irq, void *d) struct regmap *map = data->map; int ret, i; bool handled = false; + u32 reg; + + if (chip->runtime_pm) { + ret = pm_runtime_get_sync(map->dev); + if (ret < 0) { + dev_err(map->dev, "IRQ thread failed to resume: %d\n", + ret); + return IRQ_NONE; + } + } /* * Ignore masked IRQs and ack if we need to; we ack early so @@ -160,20 +186,20 @@ static irqreturn_t regmap_irq_thread(int irq, void *d) if (ret != 0) { dev_err(map->dev, "Failed to read IRQ status: %d\n", ret); + if (chip->runtime_pm) + pm_runtime_put(map->dev); return IRQ_NONE; } data->status_buf[i] &= ~data->mask_buf[i]; if (data->status_buf[i] && chip->ack_base) { - ret = regmap_write(map, chip->ack_base + - (i * map->reg_stride * - data->irq_reg_stride), - data->status_buf[i]); + reg = chip->ack_base + + (i * map->reg_stride * data->irq_reg_stride); + ret = regmap_write(map, reg, data->status_buf[i]); if (ret != 0) dev_err(map->dev, "Failed to ack 0x%x: %d\n", - chip->ack_base + (i * map->reg_stride), - ret); + reg, ret); } } @@ -185,6 +211,9 @@ static irqreturn_t regmap_irq_thread(int irq, void *d) } } + if (chip->runtime_pm) + pm_runtime_put(map->dev); + if (handled) return IRQ_HANDLED; else @@ -197,7 +226,7 @@ static int regmap_irq_map(struct irq_domain *h, unsigned int virq, struct regmap_irq_chip_data *data = h->host_data; irq_set_chip_data(virq, data); - irq_set_chip_and_handler(virq, ®map_irq_chip, handle_edge_irq); + irq_set_chip(virq, &data->irq_chip); irq_set_nested_thread(virq, 1); /* ARM needs us to explicitly flag the IRQ as valid @@ -238,6 +267,7 @@ int regmap_add_irq_chip(struct regmap *map, int irq, int irq_flags, struct regmap_irq_chip_data *d; int i; int ret = -ENOMEM; + u32 reg; for (i = 0; i < chip->num_irqs; i++) { if (chip->irqs[i].reg_offset % map->reg_stride) @@ -284,6 +314,13 @@ int regmap_add_irq_chip(struct regmap *map, int irq, int irq_flags, goto err_alloc; } + d->irq_chip = regmap_irq_chip; + d->irq_chip.name = chip->name; + if (!chip->wake_base) { + d->irq_chip.irq_set_wake = NULL; + d->irq_chip.flags |= IRQCHIP_MASK_ON_SUSPEND | + IRQCHIP_SKIP_SET_WAKE; + } d->irq = irq; d->map = map; d->chip = chip; @@ -303,16 +340,37 @@ int regmap_add_irq_chip(struct regmap *map, int irq, int irq_flags, /* Mask all the interrupts by default */ for (i = 0; i < chip->num_regs; i++) { d->mask_buf[i] = d->mask_buf_def[i]; - ret = regmap_write(map, chip->mask_base + (i * map->reg_stride - * d->irq_reg_stride), - d->mask_buf[i]); + reg = chip->mask_base + + (i * map->reg_stride * d->irq_reg_stride); + if (chip->mask_invert) + ret = regmap_update_bits(map, reg, + d->mask_buf[i], ~d->mask_buf[i]); + else + ret = regmap_update_bits(map, reg, + d->mask_buf[i], d->mask_buf[i]); if (ret != 0) { dev_err(map->dev, "Failed to set masks in 0x%x: %d\n", - chip->mask_base + (i * map->reg_stride), ret); + reg, ret); goto err_alloc; } } + /* Wake is disabled by default */ + if (d->wake_buf) { + for (i = 0; i < chip->num_regs; i++) { + d->wake_buf[i] = d->mask_buf_def[i]; + reg = chip->wake_base + + (i * map->reg_stride * d->irq_reg_stride); + ret = regmap_update_bits(map, reg, d->wake_buf[i], + d->wake_buf[i]); + if (ret != 0) { + dev_err(map->dev, "Failed to set masks in 0x%x: %d\n", + reg, ret); + goto err_alloc; + } + } + } + if (irq_base) d->domain = irq_domain_add_legacy(map->dev->of_node, chip->num_irqs, irq_base, 0, diff --git a/drivers/base/regmap/regmap.c b/drivers/base/regmap/regmap.c index c241ae2f2f1..52069d29ff1 100644 --- a/drivers/base/regmap/regmap.c +++ b/drivers/base/regmap/regmap.c @@ -659,13 +659,12 @@ EXPORT_SYMBOL_GPL(devm_regmap_init); * new cache. This can be used to restore the cache to defaults or to * update the cache configuration to reflect runtime discovery of the * hardware. + * + * No explicit locking is done here, the user needs to ensure that + * this function will not race with other calls to regmap. */ int regmap_reinit_cache(struct regmap *map, const struct regmap_config *config) { - int ret; - - map->lock(map); - regcache_exit(map); regmap_debugfs_exit(map); @@ -681,11 +680,7 @@ int regmap_reinit_cache(struct regmap *map, const struct regmap_config *config) map->cache_bypass = false; map->cache_only = false; - ret = regcache_init(map, config); - - map->unlock(map); - - return ret; + return regcache_init(map, config); } EXPORT_SYMBOL_GPL(regmap_reinit_cache); diff --git a/drivers/block/nvme.c b/drivers/block/nvme.c index 38a2d063188..ad16c68c864 100644 --- a/drivers/block/nvme.c +++ b/drivers/block/nvme.c @@ -79,6 +79,7 @@ struct nvme_dev { char serial[20]; char model[40]; char firmware_rev[8]; + u32 max_hw_sectors; }; /* @@ -835,15 +836,15 @@ static int nvme_identify(struct nvme_dev *dev, unsigned nsid, unsigned cns, } static int nvme_get_features(struct nvme_dev *dev, unsigned fid, - unsigned dword11, dma_addr_t dma_addr) + unsigned nsid, dma_addr_t dma_addr) { struct nvme_command c; memset(&c, 0, sizeof(c)); c.features.opcode = nvme_admin_get_features; + c.features.nsid = cpu_to_le32(nsid); c.features.prp1 = cpu_to_le64(dma_addr); c.features.fid = cpu_to_le32(fid); - c.features.dword11 = cpu_to_le32(dword11); return nvme_submit_admin_cmd(dev, &c, NULL); } @@ -862,11 +863,51 @@ static int nvme_set_features(struct nvme_dev *dev, unsigned fid, return nvme_submit_admin_cmd(dev, &c, result); } +/** + * nvme_cancel_ios - Cancel outstanding I/Os + * @queue: The queue to cancel I/Os on + * @timeout: True to only cancel I/Os which have timed out + */ +static void nvme_cancel_ios(struct nvme_queue *nvmeq, bool timeout) +{ + int depth = nvmeq->q_depth - 1; + struct nvme_cmd_info *info = nvme_cmd_info(nvmeq); + unsigned long now = jiffies; + int cmdid; + + for_each_set_bit(cmdid, nvmeq->cmdid_data, depth) { + void *ctx; + nvme_completion_fn fn; + static struct nvme_completion cqe = { + .status = cpu_to_le16(NVME_SC_ABORT_REQ) << 1, + }; + + if (timeout && !time_after(now, info[cmdid].timeout)) + continue; + dev_warn(nvmeq->q_dmadev, "Cancelling I/O %d\n", cmdid); + ctx = cancel_cmdid(nvmeq, cmdid, &fn); + fn(nvmeq->dev, ctx, &cqe); + } +} + +static void nvme_free_queue_mem(struct nvme_queue *nvmeq) +{ + dma_free_coherent(nvmeq->q_dmadev, CQ_SIZE(nvmeq->q_depth), + (void *)nvmeq->cqes, nvmeq->cq_dma_addr); + dma_free_coherent(nvmeq->q_dmadev, SQ_SIZE(nvmeq->q_depth), + nvmeq->sq_cmds, nvmeq->sq_dma_addr); + kfree(nvmeq); +} + static void nvme_free_queue(struct nvme_dev *dev, int qid) { struct nvme_queue *nvmeq = dev->queues[qid]; int vector = dev->entry[nvmeq->cq_vector].vector; + spin_lock_irq(&nvmeq->q_lock); + nvme_cancel_ios(nvmeq, false); + spin_unlock_irq(&nvmeq->q_lock); + irq_set_affinity_hint(vector, NULL); free_irq(vector, nvmeq); @@ -876,18 +917,15 @@ static void nvme_free_queue(struct nvme_dev *dev, int qid) adapter_delete_cq(dev, qid); } - dma_free_coherent(nvmeq->q_dmadev, CQ_SIZE(nvmeq->q_depth), - (void *)nvmeq->cqes, nvmeq->cq_dma_addr); - dma_free_coherent(nvmeq->q_dmadev, SQ_SIZE(nvmeq->q_depth), - nvmeq->sq_cmds, nvmeq->sq_dma_addr); - kfree(nvmeq); + nvme_free_queue_mem(nvmeq); } static struct nvme_queue *nvme_alloc_queue(struct nvme_dev *dev, int qid, int depth, int vector) { struct device *dmadev = &dev->pci_dev->dev; - unsigned extra = (depth / 8) + (depth * sizeof(struct nvme_cmd_info)); + unsigned extra = DIV_ROUND_UP(depth, 8) + (depth * + sizeof(struct nvme_cmd_info)); struct nvme_queue *nvmeq = kzalloc(sizeof(*nvmeq) + extra, GFP_KERNEL); if (!nvmeq) return NULL; @@ -975,7 +1013,7 @@ static __devinit struct nvme_queue *nvme_create_queue(struct nvme_dev *dev, static int __devinit nvme_configure_admin_queue(struct nvme_dev *dev) { - int result; + int result = 0; u32 aqa; u64 cap; unsigned long timeout; @@ -1005,17 +1043,22 @@ static int __devinit nvme_configure_admin_queue(struct nvme_dev *dev) timeout = ((NVME_CAP_TIMEOUT(cap) + 1) * HZ / 2) + jiffies; dev->db_stride = NVME_CAP_STRIDE(cap); - while (!(readl(&dev->bar->csts) & NVME_CSTS_RDY)) { + while (!result && !(readl(&dev->bar->csts) & NVME_CSTS_RDY)) { msleep(100); if (fatal_signal_pending(current)) - return -EINTR; + result = -EINTR; if (time_after(jiffies, timeout)) { dev_err(&dev->pci_dev->dev, "Device not ready; aborting initialisation\n"); - return -ENODEV; + result = -ENODEV; } } + if (result) { + nvme_free_queue_mem(nvmeq); + return result; + } + result = queue_request_irq(dev, nvmeq, "nvme admin"); dev->queues[0] = nvmeq; return result; @@ -1037,6 +1080,8 @@ static struct nvme_iod *nvme_map_user_pages(struct nvme_dev *dev, int write, offset = offset_in_page(addr); count = DIV_ROUND_UP(offset + length, PAGE_SIZE); pages = kcalloc(count, sizeof(*pages), GFP_KERNEL); + if (!pages) + return ERR_PTR(-ENOMEM); err = get_user_pages_fast(addr, count, 1, pages); if (err < count) { @@ -1146,14 +1191,13 @@ static int nvme_submit_io(struct nvme_ns *ns, struct nvme_user_io __user *uio) return status; } -static int nvme_user_admin_cmd(struct nvme_ns *ns, +static int nvme_user_admin_cmd(struct nvme_dev *dev, struct nvme_admin_cmd __user *ucmd) { - struct nvme_dev *dev = ns->dev; struct nvme_admin_cmd cmd; struct nvme_command c; int status, length; - struct nvme_iod *iod; + struct nvme_iod *uninitialized_var(iod); if (!capable(CAP_SYS_ADMIN)) return -EACCES; @@ -1204,7 +1248,7 @@ static int nvme_ioctl(struct block_device *bdev, fmode_t mode, unsigned int cmd, case NVME_IOCTL_ID: return ns->ns_id; case NVME_IOCTL_ADMIN_CMD: - return nvme_user_admin_cmd(ns, (void __user *)arg); + return nvme_user_admin_cmd(ns->dev, (void __user *)arg); case NVME_IOCTL_SUBMIT_IO: return nvme_submit_io(ns, (void __user *)arg); default: @@ -1218,26 +1262,6 @@ static const struct block_device_operations nvme_fops = { .compat_ioctl = nvme_ioctl, }; -static void nvme_timeout_ios(struct nvme_queue *nvmeq) -{ - int depth = nvmeq->q_depth - 1; - struct nvme_cmd_info *info = nvme_cmd_info(nvmeq); - unsigned long now = jiffies; - int cmdid; - - for_each_set_bit(cmdid, nvmeq->cmdid_data, depth) { - void *ctx; - nvme_completion_fn fn; - static struct nvme_completion cqe = { .status = cpu_to_le16(NVME_SC_ABORT_REQ) << 1, }; - - if (!time_after(now, info[cmdid].timeout)) - continue; - dev_warn(nvmeq->q_dmadev, "Timing out I/O %d\n", cmdid); - ctx = cancel_cmdid(nvmeq, cmdid, &fn); - fn(nvmeq->dev, ctx, &cqe); - } -} - static void nvme_resubmit_bios(struct nvme_queue *nvmeq) { while (bio_list_peek(&nvmeq->sq_cong)) { @@ -1269,7 +1293,7 @@ static int nvme_kthread(void *data) spin_lock_irq(&nvmeq->q_lock); if (nvme_process_cq(nvmeq)) printk("process_cq did something\n"); - nvme_timeout_ios(nvmeq); + nvme_cancel_ios(nvmeq, true); nvme_resubmit_bios(nvmeq); spin_unlock_irq(&nvmeq->q_lock); } @@ -1339,6 +1363,9 @@ static struct nvme_ns *nvme_alloc_ns(struct nvme_dev *dev, int nsid, ns->disk = disk; lbaf = id->flbas & 0xf; ns->lba_shift = id->lbaf[lbaf].ds; + blk_queue_logical_block_size(ns->queue, 1 << ns->lba_shift); + if (dev->max_hw_sectors) + blk_queue_max_hw_sectors(ns->queue, dev->max_hw_sectors); disk->major = nvme_major; disk->minors = NVME_MINORS; @@ -1383,7 +1410,7 @@ static int set_queue_count(struct nvme_dev *dev, int count) static int __devinit nvme_setup_io_queues(struct nvme_dev *dev) { - int result, cpu, i, nr_io_queues, db_bar_size; + int result, cpu, i, nr_io_queues, db_bar_size, q_depth; nr_io_queues = num_online_cpus(); result = set_queue_count(dev, nr_io_queues); @@ -1429,9 +1456,10 @@ static int __devinit nvme_setup_io_queues(struct nvme_dev *dev) cpu = cpumask_next(cpu, cpu_online_mask); } + q_depth = min_t(int, NVME_CAP_MQES(readq(&dev->bar->cap)) + 1, + NVME_Q_DEPTH); for (i = 0; i < nr_io_queues; i++) { - dev->queues[i + 1] = nvme_create_queue(dev, i + 1, - NVME_Q_DEPTH, i); + dev->queues[i + 1] = nvme_create_queue(dev, i + 1, q_depth, i); if (IS_ERR(dev->queues[i + 1])) return PTR_ERR(dev->queues[i + 1]); dev->queue_count++; @@ -1480,6 +1508,10 @@ static int __devinit nvme_dev_add(struct nvme_dev *dev) memcpy(dev->serial, ctrl->sn, sizeof(ctrl->sn)); memcpy(dev->model, ctrl->mn, sizeof(ctrl->mn)); memcpy(dev->firmware_rev, ctrl->fr, sizeof(ctrl->fr)); + if (ctrl->mdts) { + int shift = NVME_CAP_MPSMIN(readq(&dev->bar->cap)) + 12; + dev->max_hw_sectors = 1 << (ctrl->mdts + shift - 9); + } id_ns = mem; for (i = 1; i <= nn; i++) { @@ -1523,8 +1555,6 @@ static int nvme_dev_remove(struct nvme_dev *dev) list_del(&dev->node); spin_unlock(&dev_list_lock); - /* TODO: wait all I/O finished or cancel them */ - list_for_each_entry_safe(ns, next, &dev->namespaces, list) { list_del(&ns->list); del_gendisk(ns->disk); @@ -1560,15 +1590,33 @@ static void nvme_release_prp_pools(struct nvme_dev *dev) dma_pool_destroy(dev->prp_small_pool); } -/* XXX: Use an ida or something to let remove / add work correctly */ -static void nvme_set_instance(struct nvme_dev *dev) +static DEFINE_IDA(nvme_instance_ida); + +static int nvme_set_instance(struct nvme_dev *dev) { - static int instance; - dev->instance = instance++; + int instance, error; + + do { + if (!ida_pre_get(&nvme_instance_ida, GFP_KERNEL)) + return -ENODEV; + + spin_lock(&dev_list_lock); + error = ida_get_new(&nvme_instance_ida, &instance); + spin_unlock(&dev_list_lock); + } while (error == -EAGAIN); + + if (error) + return -ENODEV; + + dev->instance = instance; + return 0; } static void nvme_release_instance(struct nvme_dev *dev) { + spin_lock(&dev_list_lock); + ida_remove(&nvme_instance_ida, dev->instance); + spin_unlock(&dev_list_lock); } static int __devinit nvme_probe(struct pci_dev *pdev, @@ -1601,7 +1649,10 @@ static int __devinit nvme_probe(struct pci_dev *pdev, pci_set_drvdata(pdev, dev); dma_set_mask(&pdev->dev, DMA_BIT_MASK(64)); dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64)); - nvme_set_instance(dev); + result = nvme_set_instance(dev); + if (result) + goto disable; + dev->entry[0].vector = pdev->irq; result = nvme_setup_prp_pools(dev); @@ -1704,15 +1755,17 @@ static struct pci_driver nvme_driver = { static int __init nvme_init(void) { - int result = -EBUSY; + int result; nvme_thread = kthread_run(nvme_kthread, NULL, "nvme"); if (IS_ERR(nvme_thread)) return PTR_ERR(nvme_thread); - nvme_major = register_blkdev(nvme_major, "nvme"); - if (nvme_major <= 0) + result = register_blkdev(nvme_major, "nvme"); + if (result < 0) goto kill_kthread; + else if (result > 0) + nvme_major = result; result = pci_register_driver(&nvme_driver); if (result) diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c index 7ab6e26664a..17d6958342e 100644 --- a/drivers/dma/at_hdmac.c +++ b/drivers/dma/at_hdmac.c @@ -168,9 +168,9 @@ static void atc_desc_put(struct at_dma_chan *atchan, struct at_desc *desc) } /** - * atc_desc_chain - build chain adding a descripor - * @first: address of first descripor of the chain - * @prev: address of previous descripor of the chain + * atc_desc_chain - build chain adding a descriptor + * @first: address of first descriptor of the chain + * @prev: address of previous descriptor of the chain * @desc: descriptor to queue * * Called from prep_* functions @@ -796,7 +796,7 @@ err_out: } /** - * atc_dma_cyclic_fill_desc - Fill one period decriptor + * atc_dma_cyclic_fill_desc - Fill one period descriptor */ static int atc_dma_cyclic_fill_desc(struct dma_chan *chan, struct at_desc *desc, diff --git a/drivers/dma/ep93xx_dma.c b/drivers/dma/ep93xx_dma.c index c64917ec313..bb02fd981af 100644 --- a/drivers/dma/ep93xx_dma.c +++ b/drivers/dma/ep93xx_dma.c @@ -1118,7 +1118,7 @@ fail: * @chan: channel * @dma_addr: DMA mapped address of the buffer * @buf_len: length of the buffer (in bytes) - * @period_len: lenght of a single period + * @period_len: length of a single period * @dir: direction of the operation * @context: operation context (ignored) * diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c index 8f84761f98b..094437b9d82 100644 --- a/drivers/dma/fsldma.c +++ b/drivers/dma/fsldma.c @@ -1015,7 +1015,7 @@ static irqreturn_t fsldma_chan_irq(int irq, void *data) /* * Programming Error * The DMA_INTERRUPT async_tx is a NULL transfer, which will - * triger a PE interrupt. + * trigger a PE interrupt. */ if (stat & FSL_DMA_SR_PE) { chan_dbg(chan, "irq: Programming Error INT\n"); diff --git a/drivers/dma/imx-dma.c b/drivers/dma/imx-dma.c index 5084975d793..54f580bb993 100644 --- a/drivers/dma/imx-dma.c +++ b/drivers/dma/imx-dma.c @@ -572,8 +572,8 @@ static void imxdma_tasklet(unsigned long data) if (desc->desc.callback) desc->desc.callback(desc->desc.callback_param); - /* If we are dealing with a cyclic descriptor keep it on ld_active - * and dont mark the descripor as complete. + /* If we are dealing with a cyclic descriptor, keep it on ld_active + * and dont mark the descriptor as complete. * Only in non-cyclic cases it would be marked as complete */ if (imxdma_chan_is_doing_cyclic(imxdmac)) diff --git a/drivers/dma/intel_mid_dma.c b/drivers/dma/intel_mid_dma.c index 222e907bfaa..02b21d7d38e 100644 --- a/drivers/dma/intel_mid_dma.c +++ b/drivers/dma/intel_mid_dma.c @@ -427,7 +427,7 @@ DMA engine callback Functions*/ * intel_mid_dma_tx_submit - callback to submit DMA transaction * @tx: dma engine descriptor * - * Submit the DMA trasaction for this descriptor, start if ch idle + * Submit the DMA transaction for this descriptor, start if ch idle */ static dma_cookie_t intel_mid_dma_tx_submit(struct dma_async_tx_descriptor *tx) { diff --git a/drivers/dma/intel_mid_dma_regs.h b/drivers/dma/intel_mid_dma_regs.h index 1bfa9268fea..17b42192ea5 100644 --- a/drivers/dma/intel_mid_dma_regs.h +++ b/drivers/dma/intel_mid_dma_regs.h @@ -168,9 +168,9 @@ union intel_mid_dma_cfg_hi { * @active_list: current active descriptors * @queue: current queued up descriptors * @free_list: current free descriptors - * @slave: dma slave struture - * @descs_allocated: total number of decsiptors allocated - * @dma: dma device struture pointer + * @slave: dma slave structure + * @descs_allocated: total number of descriptors allocated + * @dma: dma device structure pointer * @busy: bool representing if ch is busy (active txn) or not * @in_use: bool representing if ch is in use or not * @raw_tfr: raw trf interrupt received diff --git a/drivers/dma/ioat/hw.h b/drivers/dma/ioat/hw.h index 60e675455b6..d2ff3fda0b1 100644 --- a/drivers/dma/ioat/hw.h +++ b/drivers/dma/ioat/hw.h @@ -22,7 +22,6 @@ #define _IOAT_HW_H_ /* PCI Configuration Space Values */ -#define IOAT_PCI_VID 0x8086 #define IOAT_MMIO_BAR 0 /* CB device ID's */ @@ -31,9 +30,6 @@ #define IOAT_PCI_DID_SCNB 0x65FF #define IOAT_PCI_DID_SNB 0x402F -#define IOAT_PCI_RID 0x00 -#define IOAT_PCI_SVID 0x8086 -#define IOAT_PCI_SID 0x8086 #define IOAT_VER_1_2 0x12 /* Version 1.2 */ #define IOAT_VER_2_0 0x20 /* Version 2.0 */ #define IOAT_VER_3_0 0x30 /* Version 3.0 */ diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c index f5843bc80ba..5d3bbcd279b 100644 --- a/drivers/dma/pl330.c +++ b/drivers/dma/pl330.c @@ -522,7 +522,7 @@ enum desc_status { /* In the DMAC pool */ FREE, /* - * Allocted to some channel during prep_xxx + * Allocated to some channel during prep_xxx * Also may be sitting on the work_list. */ PREP, diff --git a/drivers/dma/ppc4xx/adma.c b/drivers/dma/ppc4xx/adma.c index ced98826684..f72348d0bc4 100644 --- a/drivers/dma/ppc4xx/adma.c +++ b/drivers/dma/ppc4xx/adma.c @@ -4446,7 +4446,7 @@ static int __devinit ppc440spe_adma_probe(struct platform_device *ofdev) ret = -ENOMEM; goto err_dma_alloc; } - dev_dbg(&ofdev->dev, "allocted descriptor pool virt 0x%p phys 0x%llx\n", + dev_dbg(&ofdev->dev, "allocated descriptor pool virt 0x%p phys 0x%llx\n", adev->dma_desc_pool_virt, (u64)adev->dma_desc_pool); regs = ioremap(res.start, resource_size(&res)); diff --git a/drivers/dma/ste_dma40_ll.h b/drivers/dma/ste_dma40_ll.h index 51e8e5396e9..6d47373f3f5 100644 --- a/drivers/dma/ste_dma40_ll.h +++ b/drivers/dma/ste_dma40_ll.h @@ -202,7 +202,7 @@ /* LLI related structures */ /** - * struct d40_phy_lli - The basic configration register for each physical + * struct d40_phy_lli - The basic configuration register for each physical * channel. * * @reg_cfg: The configuration register. diff --git a/drivers/edac/i3200_edac.c b/drivers/edac/i3200_edac.c index 47180a08eda..b6653a6fc5d 100644 --- a/drivers/edac/i3200_edac.c +++ b/drivers/edac/i3200_edac.c @@ -391,7 +391,7 @@ static int i3200_probe1(struct pci_dev *pdev, int dev_idx) for (j = 0; j < nr_channels; j++) { struct dimm_info *dimm = csrow->channels[j]->dimm; - dimm->nr_pages = nr_pages / nr_channels; + dimm->nr_pages = nr_pages; dimm->grain = nr_pages << PAGE_SHIFT; dimm->mtype = MEM_DDR2; dimm->dtype = DEV_UNKNOWN; diff --git a/drivers/edac/i5000_edac.c b/drivers/edac/i5000_edac.c index 39c63757c2a..6a49dd00b81 100644 --- a/drivers/edac/i5000_edac.c +++ b/drivers/edac/i5000_edac.c @@ -1012,6 +1012,10 @@ static void handle_channel(struct i5000_pvt *pvt, int slot, int channel, /* add the number of COLUMN bits */ addrBits += MTR_DIMM_COLS_ADDR_BITS(mtr); + /* Dual-rank memories have twice the size */ + if (dinfo->dual_rank) + addrBits++; + addrBits += 6; /* add 64 bits per DIMM */ addrBits -= 20; /* divide by 2^^20 */ addrBits -= 3; /* 8 bits per bytes */ diff --git a/drivers/edac/sb_edac.c b/drivers/edac/sb_edac.c index f3b1f9fafa4..5715b7c2c51 100644 --- a/drivers/edac/sb_edac.c +++ b/drivers/edac/sb_edac.c @@ -513,7 +513,8 @@ static int get_dimm_config(struct mem_ctl_info *mci) { struct sbridge_pvt *pvt = mci->pvt_info; struct dimm_info *dimm; - int i, j, banks, ranks, rows, cols, size, npages; + unsigned i, j, banks, ranks, rows, cols, npages; + u64 size; u32 reg; enum edac_type mode; enum mem_type mtype; @@ -585,10 +586,10 @@ static int get_dimm_config(struct mem_ctl_info *mci) cols = numcol(mtr); /* DDR3 has 8 I/O banks */ - size = (rows * cols * banks * ranks) >> (20 - 3); + size = ((u64)rows * cols * banks * ranks) >> (20 - 3); npages = MiB_TO_PAGES(size); - edac_dbg(0, "mc#%d: channel %d, dimm %d, %d Mb (%d pages) bank: %d, rank: %d, row: %#x, col: %#x\n", + edac_dbg(0, "mc#%d: channel %d, dimm %d, %Ld Mb (%d pages) bank: %d, rank: %d, row: %#x, col: %#x\n", pvt->sbridge_dev->mc, i, j, size, npages, banks, ranks, rows, cols); diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c index 427a289f32a..6c19833ed2d 100644 --- a/drivers/extcon/extcon-arizona.c +++ b/drivers/extcon/extcon-arizona.c @@ -434,6 +434,11 @@ static int __devinit arizona_extcon_probe(struct platform_device *pdev) regmap_update_bits(arizona->regmap, ARIZONA_JACK_DETECT_ANALOGUE, ARIZONA_JD1_ENA, ARIZONA_JD1_ENA); + ret = regulator_allow_bypass(info->micvdd, true); + if (ret != 0) + dev_warn(arizona->dev, "Failed to set MICVDD to bypass: %d\n", + ret); + pm_runtime_put(&pdev->dev); return 0; diff --git a/drivers/gpio/gpio-lpc32xx.c b/drivers/gpio/gpio-lpc32xx.c index 8a420f13905..ed94b4ea72e 100644 --- a/drivers/gpio/gpio-lpc32xx.c +++ b/drivers/gpio/gpio-lpc32xx.c @@ -308,6 +308,7 @@ static int lpc32xx_gpio_dir_output_p012(struct gpio_chip *chip, unsigned pin, { struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip); + __set_gpio_level_p012(group, pin, value); __set_gpio_dir_p012(group, pin, 0); return 0; @@ -318,6 +319,7 @@ static int lpc32xx_gpio_dir_output_p3(struct gpio_chip *chip, unsigned pin, { struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip); + __set_gpio_level_p3(group, pin, value); __set_gpio_dir_p3(group, pin, 0); return 0; @@ -326,6 +328,9 @@ static int lpc32xx_gpio_dir_output_p3(struct gpio_chip *chip, unsigned pin, static int lpc32xx_gpio_dir_out_always(struct gpio_chip *chip, unsigned pin, int value) { + struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip); + + __set_gpo_level_p3(group, pin, value); return 0; } diff --git a/drivers/gpu/drm/nouveau/nouveau_abi16.c b/drivers/gpu/drm/nouveau/nouveau_abi16.c index ff23d88880e..3ca240b4413 100644 --- a/drivers/gpu/drm/nouveau/nouveau_abi16.c +++ b/drivers/gpu/drm/nouveau/nouveau_abi16.c @@ -179,7 +179,7 @@ nouveau_abi16_ioctl_grobj_alloc(ABI16_IOCTL_ARGS) return 0; } else if (init->class == 0x906e) { - NV_ERROR(dev, "906e not supported yet\n"); + NV_DEBUG(dev, "906e not supported yet\n"); return -EINVAL; } diff --git a/drivers/gpu/drm/nouveau/nvc0_fb.c b/drivers/gpu/drm/nouveau/nvc0_fb.c index f704e942372..f376c39310d 100644 --- a/drivers/gpu/drm/nouveau/nvc0_fb.c +++ b/drivers/gpu/drm/nouveau/nvc0_fb.c @@ -124,6 +124,7 @@ nvc0_fb_init(struct drm_device *dev) priv = dev_priv->engine.fb.priv; nv_wr32(dev, 0x100c10, priv->r100c10 >> 8); + nv_mask(dev, 0x17e820, 0x00100000, 0x00000000); /* NV_PLTCG_INTR_EN */ return 0; } diff --git a/drivers/gpu/drm/nouveau/nvc0_fifo.c b/drivers/gpu/drm/nouveau/nvc0_fifo.c index 7d85553d518..cd39eb99f5b 100644 --- a/drivers/gpu/drm/nouveau/nvc0_fifo.c +++ b/drivers/gpu/drm/nouveau/nvc0_fifo.c @@ -373,7 +373,8 @@ nvc0_fifo_isr_subfifo_intr(struct drm_device *dev, int unit) static void nvc0_fifo_isr(struct drm_device *dev) { - u32 stat = nv_rd32(dev, 0x002100); + u32 mask = nv_rd32(dev, 0x002140); + u32 stat = nv_rd32(dev, 0x002100) & mask; if (stat & 0x00000100) { NV_INFO(dev, "PFIFO: unknown status 0x00000100\n"); diff --git a/drivers/gpu/drm/nouveau/nve0_fifo.c b/drivers/gpu/drm/nouveau/nve0_fifo.c index e98d144e6eb..281bece751b 100644 --- a/drivers/gpu/drm/nouveau/nve0_fifo.c +++ b/drivers/gpu/drm/nouveau/nve0_fifo.c @@ -345,7 +345,8 @@ nve0_fifo_isr_subfifo_intr(struct drm_device *dev, int unit) static void nve0_fifo_isr(struct drm_device *dev) { - u32 stat = nv_rd32(dev, 0x002100); + u32 mask = nv_rd32(dev, 0x002140); + u32 stat = nv_rd32(dev, 0x002100) & mask; if (stat & 0x00000100) { NV_INFO(dev, "PFIFO: unknown status 0x00000100\n"); diff --git a/drivers/gpu/drm/udl/udl_connector.c b/drivers/gpu/drm/udl/udl_connector.c index ba055e9ca00..8d9dc44f1f9 100644 --- a/drivers/gpu/drm/udl/udl_connector.c +++ b/drivers/gpu/drm/udl/udl_connector.c @@ -69,6 +69,13 @@ static int udl_get_modes(struct drm_connector *connector) static int udl_mode_valid(struct drm_connector *connector, struct drm_display_mode *mode) { + struct udl_device *udl = connector->dev->dev_private; + if (!udl->sku_pixel_limit) + return 0; + + if (mode->vdisplay * mode->hdisplay > udl->sku_pixel_limit) + return MODE_VIRTUAL_Y; + return 0; } diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_fence.c b/drivers/gpu/drm/vmwgfx/vmwgfx_fence.c index f2fb8f15e2f..7e0743358df 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_fence.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_fence.c @@ -1018,7 +1018,7 @@ int vmw_event_fence_action_create(struct drm_file *file_priv, } - event = kzalloc(sizeof(event->event), GFP_KERNEL); + event = kzalloc(sizeof(*event), GFP_KERNEL); if (unlikely(event == NULL)) { DRM_ERROR("Failed to allocate an event.\n"); ret = -ENOMEM; diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig index fbf49503508..2af774ad106 100644 --- a/drivers/hid/Kconfig +++ b/drivers/hid/Kconfig @@ -307,7 +307,6 @@ config HID_LOGITECH config HID_LOGITECH_DJ tristate "Logitech Unifying receivers full support" depends on HID_LOGITECH - default m ---help--- Say Y if you want support for Logitech Unifying receivers and devices. Unifying receivers are capable of pairing up to 6 Logitech compliant @@ -527,6 +526,14 @@ config HID_PICOLCD_LEDS ---help--- Provide access to PicoLCD's GPO pins via leds class. +config HID_PICOLCD_CIR + bool "CIR via RC class" if EXPERT + default !EXPERT + depends on HID_PICOLCD + depends on HID_PICOLCD=RC_CORE || RC_CORE=y + ---help--- + Provide access to PicoLCD's CIR interface via remote control (LIRC). + config HID_PRIMAX tristate "Primax non-fully HID-compliant devices" depends on USB_HID @@ -534,6 +541,15 @@ config HID_PRIMAX Support for Primax devices that are not fully compliant with the HID standard. +config HID_PS3REMOTE + tristate "Sony PS3 BD Remote Control" + depends on BT_HIDP + ---help--- + Support for the Sony PS3 Blue-ray Disk Remote Control and Logitech + Harmony Adapter for PS3, which connect over Bluetooth. + + Support for the 6-axis controllers is provided by HID_SONY. + config HID_ROCCAT tristate "Roccat device support" depends on USB_HID @@ -561,7 +577,9 @@ config HID_SONY tristate "Sony PS3 controller" depends on USB_HID ---help--- - Support for Sony PS3 controller. + Support for Sony PS3 6-axis controllers. + + Support for the Sony PS3 BD Remote is provided by HID_PS3REMOTE. config HID_SPEEDLINK tristate "Speedlink VAD Cezanne mouse support" diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile index f975485f88b..5a3690ff9bf 100644 --- a/drivers/hid/Makefile +++ b/drivers/hid/Makefile @@ -69,7 +69,28 @@ obj-$(CONFIG_HID_PRODIKEYS) += hid-prodikeys.o obj-$(CONFIG_HID_PANTHERLORD) += hid-pl.o obj-$(CONFIG_HID_PETALYNX) += hid-petalynx.o obj-$(CONFIG_HID_PICOLCD) += hid-picolcd.o +hid-picolcd-y += hid-picolcd_core.o +ifdef CONFIG_HID_PICOLCD_FB +hid-picolcd-y += hid-picolcd_fb.o +endif +ifdef CONFIG_HID_PICOLCD_BACKLIGHT +hid-picolcd-y += hid-picolcd_backlight.o +endif +ifdef CONFIG_HID_PICOLCD_LCD +hid-picolcd-y += hid-picolcd_lcd.o +endif +ifdef CONFIG_HID_PICOLCD_LEDS +hid-picolcd-y += hid-picolcd_leds.o +endif +ifdef CONFIG_HID_PICOLCD_CIR +hid-picolcd-y += hid-picolcd_cir.o +endif +ifdef CONFIG_DEBUG_FS +hid-picolcd-y += hid-picolcd_debugfs.o +endif + obj-$(CONFIG_HID_PRIMAX) += hid-primax.o +obj-$(CONFIG_HID_PS3REMOTE) += hid-ps3remote.o obj-$(CONFIG_HID_ROCCAT) += hid-roccat.o hid-roccat-common.o \ hid-roccat-arvo.o hid-roccat-isku.o hid-roccat-kone.o \ hid-roccat-koneplus.o hid-roccat-kovaplus.o hid-roccat-pyra.o \ diff --git a/drivers/hid/hid-a4tech.c b/drivers/hid/hid-a4tech.c index 902d1dfeb1b..0a239885e67 100644 --- a/drivers/hid/hid-a4tech.c +++ b/drivers/hid/hid-a4tech.c @@ -5,7 +5,6 @@ * Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@suse.cz> * Copyright (c) 2005 Michael Haboustak <mike-@cinci.rr.com> for Concept2, Inc * Copyright (c) 2006-2007 Jiri Kosina - * Copyright (c) 2007 Paul Walmsley * Copyright (c) 2008 Jiri Slaby */ diff --git a/drivers/hid/hid-apple.c b/drivers/hid/hid-apple.c index 585344b6d33..06ebdbb6ea0 100644 --- a/drivers/hid/hid-apple.c +++ b/drivers/hid/hid-apple.c @@ -5,7 +5,6 @@ * Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@suse.cz> * Copyright (c) 2005 Michael Haboustak <mike-@cinci.rr.com> for Concept2, Inc * Copyright (c) 2006-2007 Jiri Kosina - * Copyright (c) 2007 Paul Walmsley * Copyright (c) 2008 Jiri Slaby <jirislaby@gmail.com> */ diff --git a/drivers/hid/hid-aureal.c b/drivers/hid/hid-aureal.c index ba64b041b8b..7968187ddf7 100644 --- a/drivers/hid/hid-aureal.c +++ b/drivers/hid/hid-aureal.c @@ -9,7 +9,6 @@ * Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@suse.cz> * Copyright (c) 2005 Michael Haboustak <mike-@cinci.rr.com> for Concept2, Inc * Copyright (c) 2006-2007 Jiri Kosina - * Copyright (c) 2007 Paul Walmsley * Copyright (c) 2008 Jiri Slaby */ #include <linux/device.h> diff --git a/drivers/hid/hid-belkin.c b/drivers/hid/hid-belkin.c index a1a765a5b08..a1a5a12c3a6 100644 --- a/drivers/hid/hid-belkin.c +++ b/drivers/hid/hid-belkin.c @@ -5,7 +5,6 @@ * Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@suse.cz> * Copyright (c) 2005 Michael Haboustak <mike-@cinci.rr.com> for Concept2, Inc * Copyright (c) 2006-2007 Jiri Kosina - * Copyright (c) 2007 Paul Walmsley * Copyright (c) 2008 Jiri Slaby */ diff --git a/drivers/hid/hid-cherry.c b/drivers/hid/hid-cherry.c index 888ece68a47..af034d3d925 100644 --- a/drivers/hid/hid-cherry.c +++ b/drivers/hid/hid-cherry.c @@ -5,7 +5,6 @@ * Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@suse.cz> * Copyright (c) 2005 Michael Haboustak <mike-@cinci.rr.com> for Concept2, Inc * Copyright (c) 2006-2007 Jiri Kosina - * Copyright (c) 2007 Paul Walmsley * Copyright (c) 2008 Jiri Slaby */ diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 8bcd168fffa..2cd6880b6b1 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -126,7 +126,7 @@ static int open_collection(struct hid_parser *parser, unsigned type) if (parser->collection_stack_ptr == HID_COLLECTION_STACK_SIZE) { hid_err(parser->device, "collection stack overflow\n"); - return -1; + return -EINVAL; } if (parser->device->maxcollection == parser->device->collection_size) { @@ -134,7 +134,7 @@ static int open_collection(struct hid_parser *parser, unsigned type) parser->device->collection_size * 2, GFP_KERNEL); if (collection == NULL) { hid_err(parser->device, "failed to reallocate collection array\n"); - return -1; + return -ENOMEM; } memcpy(collection, parser->device->collection, sizeof(struct hid_collection) * @@ -170,7 +170,7 @@ static int close_collection(struct hid_parser *parser) { if (!parser->collection_stack_ptr) { hid_err(parser->device, "collection stack underflow\n"); - return -1; + return -EINVAL; } parser->collection_stack_ptr--; return 0; @@ -374,7 +374,7 @@ static int hid_parser_global(struct hid_parser *parser, struct hid_item *item) case HID_GLOBAL_ITEM_TAG_REPORT_SIZE: parser->global.report_size = item_udata(item); - if (parser->global.report_size > 96) { + if (parser->global.report_size > 128) { hid_err(parser->device, "invalid report_size %d\n", parser->global.report_size); return -1; @@ -757,6 +757,7 @@ int hid_open_report(struct hid_device *device) struct hid_item item; unsigned int size; __u8 *start; + __u8 *buf; __u8 *end; int ret; static int (*dispatch_type[])(struct hid_parser *parser, @@ -775,12 +776,21 @@ int hid_open_report(struct hid_device *device) return -ENODEV; size = device->dev_rsize; + buf = kmemdup(start, size, GFP_KERNEL); + if (buf == NULL) + return -ENOMEM; + if (device->driver->report_fixup) - start = device->driver->report_fixup(device, start, &size); + start = device->driver->report_fixup(device, buf, &size); + else + start = buf; - device->rdesc = kmemdup(start, size, GFP_KERNEL); - if (device->rdesc == NULL) + start = kmemdup(start, size, GFP_KERNEL); + kfree(buf); + if (start == NULL) return -ENOMEM; + + device->rdesc = start; device->rsize = size; parser = vzalloc(sizeof(struct hid_parser)); @@ -1448,7 +1458,14 @@ void hid_disconnect(struct hid_device *hdev) } EXPORT_SYMBOL_GPL(hid_disconnect); -/* a list of devices for which there is a specialized driver on HID bus */ +/* + * A list of devices for which there is a specialized driver on HID bus. + * + * Please note that for multitouch devices (driven by hid-multitouch driver), + * there is a proper autodetection and autoloading in place (based on presence + * of HID_DG_CONTACTID), so those devices don't need to be added to this list, + * as we are doing the right thing in hid_scan_usage(). + */ static const struct hid_device_id hid_have_special_driver[] = { { HID_USB_DEVICE(USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_WCP32PU) }, { HID_USB_DEVICE(USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_X5_005D) }, @@ -1566,6 +1583,7 @@ static const struct hid_device_id hid_have_special_driver[] = { { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_S510_RECEIVER) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_S510_RECEIVER_2) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_RECEIVER) }, + { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_PS3) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_DINOVO_DESKTOP) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_DINOVO_EDGE) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_DINOVO_MINI) }, @@ -1627,6 +1645,7 @@ static const struct hid_device_id hid_have_special_driver[] = { { HID_USB_DEVICE(USB_VENDOR_ID_ORTEK, USB_DEVICE_ID_ORTEK_WKB2000) }, { HID_USB_DEVICE(USB_VENDOR_ID_PETALYNX, USB_DEVICE_ID_PETALYNX_MAXTER_REMOTE) }, { HID_USB_DEVICE(USB_VENDOR_ID_PRIMAX, USB_DEVICE_ID_PRIMAX_KEYBOARD) }, +#if IS_ENABLED(CONFIG_HID_ROCCAT) { HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_KONE) }, { HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_ARVO) }, { HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_ISKU) }, @@ -1635,10 +1654,12 @@ static const struct hid_device_id hid_have_special_driver[] = { { HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_PYRA_WIRED) }, { HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_PYRA_WIRELESS) }, { HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_SAVU) }, +#endif { HID_USB_DEVICE(USB_VENDOR_ID_SAITEK, USB_DEVICE_ID_SAITEK_PS1000) }, { HID_USB_DEVICE(USB_VENDOR_ID_SAMSUNG, USB_DEVICE_ID_SAMSUNG_IR_REMOTE) }, { HID_USB_DEVICE(USB_VENDOR_ID_SAMSUNG, USB_DEVICE_ID_SAMSUNG_WIRELESS_KBD_MOUSE) }, { HID_USB_DEVICE(USB_VENDOR_ID_SKYCABLE, USB_DEVICE_ID_SKYCABLE_WIRELESS_PRESENTER) }, + { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_BDREMOTE) }, { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER) }, { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_NAVIGATION_CONTROLLER) }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER) }, @@ -1663,6 +1684,7 @@ static const struct hid_device_id hid_have_special_driver[] = { { HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_WP8060U) }, { HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_WP1062) }, { HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_WIRELESS_TABLET_TWHL850) }, + { HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_TWHA60) }, { HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_SMARTJOY_PLUS) }, { HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_SUPER_JOY_BOX_3) }, { HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_DUAL_USB_JOYPAD) }, diff --git a/drivers/hid/hid-cypress.c b/drivers/hid/hid-cypress.c index 9e43aaca977..3e159a50dac 100644 --- a/drivers/hid/hid-cypress.c +++ b/drivers/hid/hid-cypress.c @@ -5,7 +5,6 @@ * Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@suse.cz> * Copyright (c) 2005 Michael Haboustak <mike-@cinci.rr.com> for Concept2, Inc * Copyright (c) 2006-2007 Jiri Kosina - * Copyright (c) 2007 Paul Walmsley * Copyright (c) 2008 Jiri Slaby */ diff --git a/drivers/hid/hid-debug.c b/drivers/hid/hid-debug.c index 01dd9a7daf7..933fff0fff1 100644 --- a/drivers/hid/hid-debug.c +++ b/drivers/hid/hid-debug.c @@ -911,15 +911,21 @@ static void hid_dump_input_mapping(struct hid_device *hid, struct seq_file *f) } - static int hid_debug_rdesc_show(struct seq_file *f, void *p) { struct hid_device *hdev = f->private; + const __u8 *rdesc = hdev->rdesc; + unsigned rsize = hdev->rsize; int i; + if (!rdesc) { + rdesc = hdev->dev_rdesc; + rsize = hdev->dev_rsize; + } + /* dump HID report descriptor */ - for (i = 0; i < hdev->rsize; i++) - seq_printf(f, "%02x ", hdev->rdesc[i]); + for (i = 0; i < rsize; i++) + seq_printf(f, "%02x ", rdesc[i]); seq_printf(f, "\n\n"); /* dump parsed data and input mappings */ diff --git a/drivers/hid/hid-ezkey.c b/drivers/hid/hid-ezkey.c index ca1163e9d42..6540af2871a 100644 --- a/drivers/hid/hid-ezkey.c +++ b/drivers/hid/hid-ezkey.c @@ -5,7 +5,6 @@ * Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@suse.cz> * Copyright (c) 2005 Michael Haboustak <mike-@cinci.rr.com> for Concept2, Inc * Copyright (c) 2006-2007 Jiri Kosina - * Copyright (c) 2007 Paul Walmsley * Copyright (c) 2008 Jiri Slaby */ diff --git a/drivers/hid/hid-gyration.c b/drivers/hid/hid-gyration.c index e88b951cd10..4442c30ef53 100644 --- a/drivers/hid/hid-gyration.c +++ b/drivers/hid/hid-gyration.c @@ -4,7 +4,6 @@ * Copyright (c) 1999 Andreas Gal * Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@suse.cz> * Copyright (c) 2005 Michael Haboustak <mike-@cinci.rr.com> for Concept2, Inc - * Copyright (c) 2007 Paul Walmsley * Copyright (c) 2008 Jiri Slaby * Copyright (c) 2006-2008 Jiri Kosina */ diff --git a/drivers/hid/hid-holtekff.c b/drivers/hid/hid-holtekff.c index 4e7542151e2..ff295e60059 100644 --- a/drivers/hid/hid-holtekff.c +++ b/drivers/hid/hid-holtekff.c @@ -100,8 +100,7 @@ static void holtekff_send(struct holtekff_device *holtekff, holtekff->field->value[i] = data[i]; } - dbg_hid("sending %02x %02x %02x %02x %02x %02x %02x\n", data[0], - data[1], data[2], data[3], data[4], data[5], data[6]); + dbg_hid("sending %*ph\n", 7, data); usbhid_submit_report(hid, holtekff->field->report, USB_DIR_OUT); } diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 1dcb76ff51e..ca4d83e6e38 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -5,7 +5,6 @@ * Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@suse.cz> * Copyright (c) 2005 Michael Haboustak <mike-@cinci.rr.com> for Concept2, Inc * Copyright (c) 2006-2007 Jiri Kosina - * Copyright (c) 2007 Paul Walmsley */ /* @@ -269,7 +268,11 @@ #define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_72FA 0x72fa #define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_7302 0x7302 #define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_7349 0x7349 +#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_73F7 0x73f7 #define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_A001 0xa001 +#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_7224 0x7224 +#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_72D0 0x72d0 +#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_72C4 0x72c4 #define USB_VENDOR_ID_ELECOM 0x056e #define USB_DEVICE_ID_ELECOM_BM084 0x0061 @@ -283,6 +286,9 @@ #define USB_VENDOR_ID_EMS 0x2006 #define USB_DEVICE_ID_EMS_TRIO_LINKER_PLUS_II 0x0118 +#define USB_VENDOR_ID_FLATFROG 0x25b5 +#define USB_DEVICE_ID_MULTITOUCH_3200 0x0002 + #define USB_VENDOR_ID_ESSENTIAL_REALITY 0x0d7f #define USB_DEVICE_ID_ESSENTIAL_REALITY_P5 0x0100 @@ -296,6 +302,9 @@ #define USB_VENDOR_ID_EZKEY 0x0518 #define USB_DEVICE_ID_BTC_8193 0x0002 +#define USB_VENDOR_ID_FREESCALE 0x15A2 +#define USB_DEVICE_ID_FREESCALE_MX28 0x004F + #define USB_VENDOR_ID_FRUCTEL 0x25B6 #define USB_DEVICE_ID_GAMETEL_MT_MODE 0x0002 @@ -305,6 +314,7 @@ #define USB_VENDOR_ID_GENERAL_TOUCH 0x0dfc #define USB_DEVICE_ID_GENERAL_TOUCH_WIN7_TWOFINGERS 0x0003 +#define USB_DEVICE_ID_GENERAL_TOUCH_WIN8_PWT_TENFINGERS 0x0100 #define USB_VENDOR_ID_GLAB 0x06c2 #define USB_DEVICE_ID_4_PHIDGETSERVO_30 0x0038 @@ -496,6 +506,7 @@ #define USB_DEVICE_ID_LOGITECH_RECEIVER 0xc101 #define USB_DEVICE_ID_LOGITECH_HARMONY_FIRST 0xc110 #define USB_DEVICE_ID_LOGITECH_HARMONY_LAST 0xc14f +#define USB_DEVICE_ID_LOGITECH_HARMONY_PS3 0x0306 #define USB_DEVICE_ID_LOGITECH_RUMBLEPAD_CORD 0xc20a #define USB_DEVICE_ID_LOGITECH_RUMBLEPAD 0xc211 #define USB_DEVICE_ID_LOGITECH_EXTREME_3D 0xc215 @@ -652,7 +663,6 @@ #define USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH 0x3000 #define USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH_3001 0x3001 #define USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH_3008 0x3008 -#define USB_DEVICE_ID_PIXART_IMAGING_INC_OPTICAL_TOUCH_SCREEN 0x3001 #define USB_VENDOR_ID_ROCCAT 0x1e7d #define USB_DEVICE_ID_ROCCAT_ARVO 0x30d4 @@ -683,6 +693,7 @@ #define USB_VENDOR_ID_SONY 0x054c #define USB_DEVICE_ID_SONY_VAIO_VGX_MOUSE 0x024b +#define USB_DEVICE_ID_SONY_PS3_BDREMOTE 0x0306 #define USB_DEVICE_ID_SONY_PS3_CONTROLLER 0x0268 #define USB_DEVICE_ID_SONY_NAVIGATION_CONTROLLER 0x042f @@ -758,6 +769,7 @@ #define USB_DEVICE_ID_UCLOGIC_TABLET_WP8060U 0x0005 #define USB_DEVICE_ID_UCLOGIC_TABLET_WP1062 0x0064 #define USB_DEVICE_ID_UCLOGIC_WIRELESS_TABLET_TWHL850 0x0522 +#define USB_DEVICE_ID_UCLOGIC_TABLET_TWHA60 0x0781 #define USB_VENDOR_ID_UNITEC 0x227d #define USB_DEVICE_ID_UNITEC_USB_TOUCH_0709 0x0709 diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c index 811bfad6460..d917c0d5368 100644 --- a/drivers/hid/hid-input.c +++ b/drivers/hid/hid-input.c @@ -1154,6 +1154,7 @@ static void report_features(struct hid_device *hid) int hidinput_connect(struct hid_device *hid, unsigned int force) { + struct hid_driver *drv = hid->driver; struct hid_report *report; struct hid_input *hidinput = NULL; struct input_dev *input_dev; @@ -1228,6 +1229,8 @@ int hidinput_connect(struct hid_device *hid, unsigned int force) * UGCI) cram a lot of unrelated inputs into the * same interface. */ hidinput->report = report; + if (drv->input_configured) + drv->input_configured(hid, hidinput); if (input_register_device(hidinput->input)) goto out_cleanup; hidinput = NULL; @@ -1235,8 +1238,12 @@ int hidinput_connect(struct hid_device *hid, unsigned int force) } } - if (hidinput && input_register_device(hidinput->input)) - goto out_cleanup; + if (hidinput) { + if (drv->input_configured) + drv->input_configured(hid, hidinput); + if (input_register_device(hidinput->input)) + goto out_cleanup; + } return 0; diff --git a/drivers/hid/hid-lcpower.c b/drivers/hid/hid-lcpower.c index c4fe9bd095b..22bc14abdfa 100644 --- a/drivers/hid/hid-lcpower.c +++ b/drivers/hid/hid-lcpower.c @@ -24,7 +24,7 @@ static int ts_input_mapping(struct hid_device *hdev, struct hid_input *hi, struct hid_field *field, struct hid_usage *usage, unsigned long **bit, int *max) { - if ((usage->hid & HID_USAGE_PAGE) != 0x0ffbc0000) + if ((usage->hid & HID_USAGE_PAGE) != HID_UP_LOGIVENDOR) return 0; switch (usage->hid & HID_USAGE) { diff --git a/drivers/hid/hid-lenovo-tpkbd.c b/drivers/hid/hid-lenovo-tpkbd.c index 60c4e1e8591..cea016e94f4 100644 --- a/drivers/hid/hid-lenovo-tpkbd.c +++ b/drivers/hid/hid-lenovo-tpkbd.c @@ -56,9 +56,8 @@ static int tpkbd_input_mapping(struct hid_device *hdev, static int tpkbd_features_set(struct hid_device *hdev) { struct hid_report *report; - struct tpkbd_data_pointer *data_pointer; + struct tpkbd_data_pointer *data_pointer = hid_get_drvdata(hdev); - data_pointer = (struct tpkbd_data_pointer *) hid_get_drvdata(hdev); report = hdev->report_enum[HID_FEATURE_REPORT].report_id_hash[4]; report->field[0]->value[0] = data_pointer->press_to_select ? 0x01 : 0x02; @@ -77,14 +76,8 @@ static ssize_t pointer_press_to_select_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct hid_device *hdev; - struct tpkbd_data_pointer *data_pointer; - - hdev = container_of(dev, struct hid_device, dev); - if (hdev == NULL) - return -ENODEV; - - data_pointer = (struct tpkbd_data_pointer *) hid_get_drvdata(hdev); + struct hid_device *hdev = container_of(dev, struct hid_device, dev); + struct tpkbd_data_pointer *data_pointer = hid_get_drvdata(hdev); return snprintf(buf, PAGE_SIZE, "%u\n", data_pointer->press_to_select); } @@ -94,16 +87,10 @@ static ssize_t pointer_press_to_select_store(struct device *dev, const char *buf, size_t count) { - struct hid_device *hdev; - struct tpkbd_data_pointer *data_pointer; + struct hid_device *hdev = container_of(dev, struct hid_device, dev); + struct tpkbd_data_pointer *data_pointer = hid_get_drvdata(hdev); int value; - hdev = container_of(dev, struct hid_device, dev); - if (hdev == NULL) - return -ENODEV; - - data_pointer = (struct tpkbd_data_pointer *) hid_get_drvdata(hdev); - if (kstrtoint(buf, 10, &value)) return -EINVAL; if (value < 0 || value > 1) @@ -119,14 +106,8 @@ static ssize_t pointer_dragging_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct hid_device *hdev; - struct tpkbd_data_pointer *data_pointer; - - hdev = container_of(dev, struct hid_device, dev); - if (hdev == NULL) - return -ENODEV; - - data_pointer = (struct tpkbd_data_pointer *) hid_get_drvdata(hdev); + struct hid_device *hdev = container_of(dev, struct hid_device, dev); + struct tpkbd_data_pointer *data_pointer = hid_get_drvdata(hdev); return snprintf(buf, PAGE_SIZE, "%u\n", data_pointer->dragging); } @@ -136,16 +117,10 @@ static ssize_t pointer_dragging_store(struct device *dev, const char *buf, size_t count) { - struct hid_device *hdev; - struct tpkbd_data_pointer *data_pointer; + struct hid_device *hdev = container_of(dev, struct hid_device, dev); + struct tpkbd_data_pointer *data_pointer = hid_get_drvdata(hdev); int value; - hdev = container_of(dev, struct hid_device, dev); - if (hdev == NULL) - return -ENODEV; - - data_pointer = (struct tpkbd_data_pointer *) hid_get_drvdata(hdev); - if (kstrtoint(buf, 10, &value)) return -EINVAL; if (value < 0 || value > 1) @@ -161,14 +136,8 @@ static ssize_t pointer_release_to_select_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct hid_device *hdev; - struct tpkbd_data_pointer *data_pointer; - - hdev = container_of(dev, struct hid_device, dev); - if (hdev == NULL) - return -ENODEV; - - data_pointer = (struct tpkbd_data_pointer *) hid_get_drvdata(hdev); + struct hid_device *hdev = container_of(dev, struct hid_device, dev); + struct tpkbd_data_pointer *data_pointer = hid_get_drvdata(hdev); return snprintf(buf, PAGE_SIZE, "%u\n", data_pointer->release_to_select); } @@ -178,16 +147,10 @@ static ssize_t pointer_release_to_select_store(struct device *dev, const char *buf, size_t count) { - struct hid_device *hdev; - struct tpkbd_data_pointer *data_pointer; + struct hid_device *hdev = container_of(dev, struct hid_device, dev); + struct tpkbd_data_pointer *data_pointer = hid_get_drvdata(hdev); int value; - hdev = container_of(dev, struct hid_device, dev); - if (hdev == NULL) - return -ENODEV; - - data_pointer = (struct tpkbd_data_pointer *) hid_get_drvdata(hdev); - if (kstrtoint(buf, 10, &value)) return -EINVAL; if (value < 0 || value > 1) @@ -203,14 +166,8 @@ static ssize_t pointer_select_right_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct hid_device *hdev; - struct tpkbd_data_pointer *data_pointer; - - hdev = container_of(dev, struct hid_device, dev); - if (hdev == NULL) - return -ENODEV; - - data_pointer = (struct tpkbd_data_pointer *) hid_get_drvdata(hdev); + struct hid_device *hdev = container_of(dev, struct hid_device, dev); + struct tpkbd_data_pointer *data_pointer = hid_get_drvdata(hdev); return snprintf(buf, PAGE_SIZE, "%u\n", data_pointer->select_right); } @@ -220,16 +177,10 @@ static ssize_t pointer_select_right_store(struct device *dev, const char *buf, size_t count) { - struct hid_device *hdev; - struct tpkbd_data_pointer *data_pointer; + struct hid_device *hdev = container_of(dev, struct hid_device, dev); + struct tpkbd_data_pointer *data_pointer = hid_get_drvdata(hdev); int value; - hdev = container_of(dev, struct hid_device, dev); - if (hdev == NULL) - return -ENODEV; - - data_pointer = (struct tpkbd_data_pointer *) hid_get_drvdata(hdev); - if (kstrtoint(buf, 10, &value)) return -EINVAL; if (value < 0 || value > 1) @@ -245,14 +196,8 @@ static ssize_t pointer_sensitivity_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct hid_device *hdev; - struct tpkbd_data_pointer *data_pointer; - - hdev = container_of(dev, struct hid_device, dev); - if (hdev == NULL) - return -ENODEV; - - data_pointer = (struct tpkbd_data_pointer *) hid_get_drvdata(hdev); + struct hid_device *hdev = container_of(dev, struct hid_device, dev); + struct tpkbd_data_pointer *data_pointer = hid_get_drvdata(hdev); return snprintf(buf, PAGE_SIZE, "%u\n", data_pointer->sensitivity); @@ -263,16 +208,10 @@ static ssize_t pointer_sensitivity_store(struct device *dev, const char *buf, size_t count) { - struct hid_device *hdev; - struct tpkbd_data_pointer *data_pointer; + struct hid_device *hdev = container_of(dev, struct hid_device, dev); + struct tpkbd_data_pointer *data_pointer = hid_get_drvdata(hdev); int value; - hdev = container_of(dev, struct hid_device, dev); - if (hdev == NULL) - return -ENODEV; - - data_pointer = (struct tpkbd_data_pointer *) hid_get_drvdata(hdev); - if (kstrtoint(buf, 10, &value) || value < 1 || value > 255) return -EINVAL; @@ -286,14 +225,10 @@ static ssize_t pointer_press_speed_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct hid_device *hdev; - struct tpkbd_data_pointer *data_pointer; + struct hid_device *hdev = container_of(dev, struct hid_device, dev); + struct tpkbd_data_pointer *data_pointer = hid_get_drvdata(hdev); - hdev = container_of(dev, struct hid_device, dev); - if (hdev == NULL) - return -ENODEV; - - data_pointer = (struct tpkbd_data_pointer *) hid_get_drvdata(hdev); + data_pointer = hid_get_drvdata(hdev); return snprintf(buf, PAGE_SIZE, "%u\n", data_pointer->press_speed); @@ -304,16 +239,10 @@ static ssize_t pointer_press_speed_store(struct device *dev, const char *buf, size_t count) { - struct hid_device *hdev; - struct tpkbd_data_pointer *data_pointer; + struct hid_device *hdev = container_of(dev, struct hid_device, dev); + struct tpkbd_data_pointer *data_pointer = hid_get_drvdata(hdev); int value; - hdev = container_of(dev, struct hid_device, dev); - if (hdev == NULL) - return -ENODEV; - - data_pointer = (struct tpkbd_data_pointer *) hid_get_drvdata(hdev); - if (kstrtoint(buf, 10, &value) || value < 1 || value > 255) return -EINVAL; @@ -370,15 +299,11 @@ static const struct attribute_group tpkbd_attr_group_pointer = { static enum led_brightness tpkbd_led_brightness_get( struct led_classdev *led_cdev) { - struct device *dev; - struct hid_device *hdev; - struct tpkbd_data_pointer *data_pointer; + struct device *dev = led_cdev->dev->parent; + struct hid_device *hdev = container_of(dev, struct hid_device, dev); + struct tpkbd_data_pointer *data_pointer = hid_get_drvdata(hdev); int led_nr = 0; - dev = led_cdev->dev->parent; - hdev = container_of(dev, struct hid_device, dev); - data_pointer = (struct tpkbd_data_pointer *) hid_get_drvdata(hdev); - if (led_cdev == &data_pointer->led_micmute) led_nr = 1; @@ -390,16 +315,12 @@ static enum led_brightness tpkbd_led_brightness_get( static void tpkbd_led_brightness_set(struct led_classdev *led_cdev, enum led_brightness value) { - struct device *dev; - struct hid_device *hdev; + struct device *dev = led_cdev->dev->parent; + struct hid_device *hdev = container_of(dev, struct hid_device, dev); + struct tpkbd_data_pointer *data_pointer = hid_get_drvdata(hdev); struct hid_report *report; - struct tpkbd_data_pointer *data_pointer; int led_nr = 0; - dev = led_cdev->dev->parent; - hdev = container_of(dev, struct hid_device, dev); - data_pointer = (struct tpkbd_data_pointer *) hid_get_drvdata(hdev); - if (led_cdev == &data_pointer->led_micmute) led_nr = 1; @@ -508,13 +429,11 @@ err_free: static void tpkbd_remove_tp(struct hid_device *hdev) { - struct tpkbd_data_pointer *data_pointer; + struct tpkbd_data_pointer *data_pointer = hid_get_drvdata(hdev); sysfs_remove_group(&hdev->dev.kobj, &tpkbd_attr_group_pointer); - data_pointer = (struct tpkbd_data_pointer *) hid_get_drvdata(hdev); - led_classdev_unregister(&data_pointer->led_micmute); led_classdev_unregister(&data_pointer->led_mute); diff --git a/drivers/hid/hid-lg.c b/drivers/hid/hid-lg.c index fc37ed6b108..a2f8e88b9fa 100644 --- a/drivers/hid/hid-lg.c +++ b/drivers/hid/hid-lg.c @@ -5,7 +5,6 @@ * Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@suse.cz> * Copyright (c) 2005 Michael Haboustak <mike-@cinci.rr.com> for Concept2, Inc * Copyright (c) 2006-2007 Jiri Kosina - * Copyright (c) 2007 Paul Walmsley * Copyright (c) 2008 Jiri Slaby * Copyright (c) 2010 Hendrik Iben */ @@ -109,7 +108,7 @@ static __u8 dfp_rdesc_fixed[] = { static __u8 *lg_report_fixup(struct hid_device *hdev, __u8 *rdesc, unsigned int *rsize) { - struct lg_drv_data *drv_data = (struct lg_drv_data *)hid_get_drvdata(hdev); + struct lg_drv_data *drv_data = hid_get_drvdata(hdev); if ((drv_data->quirks & LG_RDESC) && *rsize >= 90 && rdesc[83] == 0x26 && rdesc[84] == 0x8c && rdesc[85] == 0x02) { @@ -278,7 +277,7 @@ static int lg_input_mapping(struct hid_device *hdev, struct hid_input *hi, 0, 0, 0, 0, 0,183,184,185,186,187, 188,189,190,191,192,193,194, 0, 0, 0 }; - struct lg_drv_data *drv_data = (struct lg_drv_data *)hid_get_drvdata(hdev); + struct lg_drv_data *drv_data = hid_get_drvdata(hdev); unsigned int hid = usage->hid; if (hdev->product == USB_DEVICE_ID_LOGITECH_RECEIVER && @@ -319,7 +318,7 @@ static int lg_input_mapped(struct hid_device *hdev, struct hid_input *hi, struct hid_field *field, struct hid_usage *usage, unsigned long **bit, int *max) { - struct lg_drv_data *drv_data = (struct lg_drv_data *)hid_get_drvdata(hdev); + struct lg_drv_data *drv_data = hid_get_drvdata(hdev); if ((drv_data->quirks & LG_BAD_RELATIVE_KEYS) && usage->type == EV_KEY && (field->flags & HID_MAIN_ITEM_RELATIVE)) @@ -335,13 +334,16 @@ static int lg_input_mapped(struct hid_device *hdev, struct hid_input *hi, static int lg_event(struct hid_device *hdev, struct hid_field *field, struct hid_usage *usage, __s32 value) { - struct lg_drv_data *drv_data = (struct lg_drv_data *)hid_get_drvdata(hdev); + struct lg_drv_data *drv_data = hid_get_drvdata(hdev); if ((drv_data->quirks & LG_INVERT_HWHEEL) && usage->code == REL_HWHEEL) { input_event(field->hidinput->input, usage->type, usage->code, -value); return 1; } + if (drv_data->quirks & LG_FF4) { + return lg4ff_adjust_input_event(hdev, field, usage, value, drv_data); + } return 0; } @@ -358,7 +360,7 @@ static int lg_probe(struct hid_device *hdev, const struct hid_device_id *id) return -ENOMEM; } drv_data->quirks = id->driver_data; - + hid_set_drvdata(hdev, (void *)drv_data); if (drv_data->quirks & LG_NOGET) @@ -380,7 +382,7 @@ static int lg_probe(struct hid_device *hdev, const struct hid_device_id *id) } /* Setup wireless link with Logitech Wii wheel */ - if(hdev->product == USB_DEVICE_ID_LOGITECH_WII_WHEEL) { + if (hdev->product == USB_DEVICE_ID_LOGITECH_WII_WHEEL) { unsigned char buf[] = { 0x00, 0xAF, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; ret = hdev->hid_output_raw_report(hdev, buf, sizeof(buf), HID_FEATURE_REPORT); @@ -416,7 +418,7 @@ err_free: static void lg_remove(struct hid_device *hdev) { - struct lg_drv_data *drv_data = (struct lg_drv_data *)hid_get_drvdata(hdev); + struct lg_drv_data *drv_data = hid_get_drvdata(hdev); if (drv_data->quirks & LG_FF4) lg4ff_deinit(hdev); @@ -476,7 +478,7 @@ static const struct hid_device_id lg_devices[] = { .driver_data = LG_NOGET | LG_FF4 }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_WII_WHEEL), .driver_data = LG_FF4 }, - { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_WINGMAN_FFG ), + { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_WINGMAN_FFG), .driver_data = LG_FF }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_RUMBLEPAD2), .driver_data = LG_FF2 }, diff --git a/drivers/hid/hid-lg.h b/drivers/hid/hid-lg.h index d64cf8d2751..142ce3f5f05 100644 --- a/drivers/hid/hid-lg.h +++ b/drivers/hid/hid-lg.h @@ -25,9 +25,13 @@ static inline int lg3ff_init(struct hid_device *hdev) { return -1; } #endif #ifdef CONFIG_LOGIWHEELS_FF +int lg4ff_adjust_input_event(struct hid_device *hid, struct hid_field *field, + struct hid_usage *usage, __s32 value, struct lg_drv_data *drv_data); int lg4ff_init(struct hid_device *hdev); int lg4ff_deinit(struct hid_device *hdev); #else +static inline int lg4ff_adjust_input_event(struct hid_device *hid, struct hid_field *field, + struct hid_usage *usage, __s32 value, struct lg_drv_data *drv_data) { return 0; } static inline int lg4ff_init(struct hid_device *hdev) { return -1; } static inline int lg4ff_deinit(struct hid_device *hdev) { return -1; } #endif diff --git a/drivers/hid/hid-lg4ff.c b/drivers/hid/hid-lg4ff.c index f3390ee6105..d7947c701f3 100644 --- a/drivers/hid/hid-lg4ff.c +++ b/drivers/hid/hid-lg4ff.c @@ -43,6 +43,11 @@ #define G27_REV_MAJ 0x12 #define G27_REV_MIN 0x38 +#define DFP_X_MIN 0 +#define DFP_X_MAX 16383 +#define DFP_PEDAL_MIN 0 +#define DFP_PEDAL_MAX 255 + #define to_hid_device(pdev) container_of(pdev, struct hid_device, dev) static void hid_lg4ff_set_range_dfp(struct hid_device *hid, u16 range); @@ -53,6 +58,7 @@ static ssize_t lg4ff_range_store(struct device *dev, struct device_attribute *at static DEVICE_ATTR(range, S_IRWXU | S_IRWXG | S_IRWXO, lg4ff_range_show, lg4ff_range_store); struct lg4ff_device_entry { + __u32 product_id; __u16 range; __u16 min_range; __u16 max_range; @@ -129,26 +135,77 @@ static const struct lg4ff_usb_revision lg4ff_revs[] = { {G27_REV_MAJ, G27_REV_MIN, &native_g27}, /* G27 */ }; +/* Recalculates X axis value accordingly to currently selected range */ +static __s32 lg4ff_adjust_dfp_x_axis(__s32 value, __u16 range) +{ + __u16 max_range; + __s32 new_value; + + if (range == 900) + return value; + else if (range == 200) + return value; + else if (range < 200) + max_range = 200; + else + max_range = 900; + + new_value = 8192 + mult_frac(value - 8192, max_range, range); + if (new_value < 0) + return 0; + else if (new_value > 16383) + return 16383; + else + return new_value; +} + +int lg4ff_adjust_input_event(struct hid_device *hid, struct hid_field *field, + struct hid_usage *usage, __s32 value, struct lg_drv_data *drv_data) +{ + struct lg4ff_device_entry *entry = drv_data->device_props; + __s32 new_value = 0; + + if (!entry) { + hid_err(hid, "Device properties not found"); + return 0; + } + + switch (entry->product_id) { + case USB_DEVICE_ID_LOGITECH_DFP_WHEEL: + switch (usage->code) { + case ABS_X: + new_value = lg4ff_adjust_dfp_x_axis(value, entry->range); + input_event(field->hidinput->input, usage->type, usage->code, new_value); + return 1; + default: + return 0; + } + default: + return 0; + } +} + static int hid_lg4ff_play(struct input_dev *dev, void *data, struct ff_effect *effect) { struct hid_device *hid = input_get_drvdata(dev); struct list_head *report_list = &hid->report_enum[HID_OUTPUT_REPORT].report_list; struct hid_report *report = list_entry(report_list->next, struct hid_report, list); + __s32 *value = report->field[0]->value; int x; -#define CLAMP(x) if (x < 0) x = 0; if (x > 0xff) x = 0xff +#define CLAMP(x) do { if (x < 0) x = 0; else if (x > 0xff) x = 0xff; } while (0) switch (effect->type) { case FF_CONSTANT: x = effect->u.ramp.start_level + 0x80; /* 0x80 is no force */ CLAMP(x); - report->field[0]->value[0] = 0x11; /* Slot 1 */ - report->field[0]->value[1] = 0x08; - report->field[0]->value[2] = x; - report->field[0]->value[3] = 0x80; - report->field[0]->value[4] = 0x00; - report->field[0]->value[5] = 0x00; - report->field[0]->value[6] = 0x00; + value[0] = 0x11; /* Slot 1 */ + value[1] = 0x08; + value[2] = x; + value[3] = 0x80; + value[4] = 0x00; + value[5] = 0x00; + value[6] = 0x00; usbhid_submit_report(hid, report, USB_DIR_OUT); break; @@ -163,14 +220,15 @@ static void hid_lg4ff_set_autocenter_default(struct input_dev *dev, u16 magnitud struct hid_device *hid = input_get_drvdata(dev); struct list_head *report_list = &hid->report_enum[HID_OUTPUT_REPORT].report_list; struct hid_report *report = list_entry(report_list->next, struct hid_report, list); + __s32 *value = report->field[0]->value; - report->field[0]->value[0] = 0xfe; - report->field[0]->value[1] = 0x0d; - report->field[0]->value[2] = magnitude >> 13; - report->field[0]->value[3] = magnitude >> 13; - report->field[0]->value[4] = magnitude >> 8; - report->field[0]->value[5] = 0x00; - report->field[0]->value[6] = 0x00; + value[0] = 0xfe; + value[1] = 0x0d; + value[2] = magnitude >> 13; + value[3] = magnitude >> 13; + value[4] = magnitude >> 8; + value[5] = 0x00; + value[6] = 0x00; usbhid_submit_report(hid, report, USB_DIR_OUT); } @@ -181,16 +239,16 @@ static void hid_lg4ff_set_autocenter_ffex(struct input_dev *dev, u16 magnitude) struct hid_device *hid = input_get_drvdata(dev); struct list_head *report_list = &hid->report_enum[HID_OUTPUT_REPORT].report_list; struct hid_report *report = list_entry(report_list->next, struct hid_report, list); + __s32 *value = report->field[0]->value; magnitude = magnitude * 90 / 65535; - - report->field[0]->value[0] = 0xfe; - report->field[0]->value[1] = 0x03; - report->field[0]->value[2] = magnitude >> 14; - report->field[0]->value[3] = magnitude >> 14; - report->field[0]->value[4] = magnitude; - report->field[0]->value[5] = 0x00; - report->field[0]->value[6] = 0x00; + value[0] = 0xfe; + value[1] = 0x03; + value[2] = magnitude >> 14; + value[3] = magnitude >> 14; + value[4] = magnitude; + value[5] = 0x00; + value[6] = 0x00; usbhid_submit_report(hid, report, USB_DIR_OUT); } @@ -200,15 +258,17 @@ static void hid_lg4ff_set_range_g25(struct hid_device *hid, u16 range) { struct list_head *report_list = &hid->report_enum[HID_OUTPUT_REPORT].report_list; struct hid_report *report = list_entry(report_list->next, struct hid_report, list); + __s32 *value = report->field[0]->value; + dbg_hid("G25/G27/DFGT: setting range to %u\n", range); - report->field[0]->value[0] = 0xf8; - report->field[0]->value[1] = 0x81; - report->field[0]->value[2] = range & 0x00ff; - report->field[0]->value[3] = (range & 0xff00) >> 8; - report->field[0]->value[4] = 0x00; - report->field[0]->value[5] = 0x00; - report->field[0]->value[6] = 0x00; + value[0] = 0xf8; + value[1] = 0x81; + value[2] = range & 0x00ff; + value[3] = (range & 0xff00) >> 8; + value[4] = 0x00; + value[5] = 0x00; + value[6] = 0x00; usbhid_submit_report(hid, report, USB_DIR_OUT); } @@ -219,16 +279,18 @@ static void hid_lg4ff_set_range_dfp(struct hid_device *hid, __u16 range) struct list_head *report_list = &hid->report_enum[HID_OUTPUT_REPORT].report_list; struct hid_report *report = list_entry(report_list->next, struct hid_report, list); int start_left, start_right, full_range; + __s32 *value = report->field[0]->value; + dbg_hid("Driving Force Pro: setting range to %u\n", range); /* Prepare "coarse" limit command */ - report->field[0]->value[0] = 0xf8; - report->field[0]->value[1] = 0x00; /* Set later */ - report->field[0]->value[2] = 0x00; - report->field[0]->value[3] = 0x00; - report->field[0]->value[4] = 0x00; - report->field[0]->value[5] = 0x00; - report->field[0]->value[6] = 0x00; + value[0] = 0xf8; + value[1] = 0x00; /* Set later */ + value[2] = 0x00; + value[3] = 0x00; + value[4] = 0x00; + value[5] = 0x00; + value[6] = 0x00; if (range > 200) { report->field[0]->value[1] = 0x03; @@ -240,13 +302,13 @@ static void hid_lg4ff_set_range_dfp(struct hid_device *hid, __u16 range) usbhid_submit_report(hid, report, USB_DIR_OUT); /* Prepare "fine" limit command */ - report->field[0]->value[0] = 0x81; - report->field[0]->value[1] = 0x0b; - report->field[0]->value[2] = 0x00; - report->field[0]->value[3] = 0x00; - report->field[0]->value[4] = 0x00; - report->field[0]->value[5] = 0x00; - report->field[0]->value[6] = 0x00; + value[0] = 0x81; + value[1] = 0x0b; + value[2] = 0x00; + value[3] = 0x00; + value[4] = 0x00; + value[5] = 0x00; + value[6] = 0x00; if (range == 200 || range == 900) { /* Do not apply any fine limit */ usbhid_submit_report(hid, report, USB_DIR_OUT); @@ -257,11 +319,11 @@ static void hid_lg4ff_set_range_dfp(struct hid_device *hid, __u16 range) start_left = (((full_range - range + 1) * 2047) / full_range); start_right = 0xfff - start_left; - report->field[0]->value[2] = start_left >> 4; - report->field[0]->value[3] = start_right >> 4; - report->field[0]->value[4] = 0xff; - report->field[0]->value[5] = (start_right & 0xe) << 4 | (start_left & 0xe); - report->field[0]->value[6] = 0xff; + value[2] = start_left >> 4; + value[3] = start_right >> 4; + value[4] = 0xff; + value[5] = (start_right & 0xe) << 4 | (start_left & 0xe); + value[6] = 0xff; usbhid_submit_report(hid, report, USB_DIR_OUT); } @@ -344,14 +406,15 @@ static void lg4ff_set_leds(struct hid_device *hid, __u8 leds) { struct list_head *report_list = &hid->report_enum[HID_OUTPUT_REPORT].report_list; struct hid_report *report = list_entry(report_list->next, struct hid_report, list); - - report->field[0]->value[0] = 0xf8; - report->field[0]->value[1] = 0x12; - report->field[0]->value[2] = leds; - report->field[0]->value[3] = 0x00; - report->field[0]->value[4] = 0x00; - report->field[0]->value[5] = 0x00; - report->field[0]->value[6] = 0x00; + __s32 *value = report->field[0]->value; + + value[0] = 0xf8; + value[1] = 0x12; + value[2] = leds; + value[3] = 0x00; + value[4] = 0x00; + value[5] = 0x00; + value[6] = 0x00; usbhid_submit_report(hid, report, USB_DIR_OUT); } @@ -360,7 +423,7 @@ static void lg4ff_led_set_brightness(struct led_classdev *led_cdev, { struct device *dev = led_cdev->dev->parent; struct hid_device *hid = container_of(dev, struct hid_device, dev); - struct lg_drv_data *drv_data = (struct lg_drv_data *)hid_get_drvdata(hid); + struct lg_drv_data *drv_data = hid_get_drvdata(hid); struct lg4ff_device_entry *entry; int i, state = 0; @@ -395,7 +458,7 @@ static enum led_brightness lg4ff_led_get_brightness(struct led_classdev *led_cde { struct device *dev = led_cdev->dev->parent; struct hid_device *hid = container_of(dev, struct hid_device, dev); - struct lg_drv_data *drv_data = (struct lg_drv_data *)hid_get_drvdata(hid); + struct lg_drv_data *drv_data = hid_get_drvdata(hid); struct lg4ff_device_entry *entry; int i, value = 0; @@ -501,7 +564,7 @@ int lg4ff_init(struct hid_device *hid) /* Check if autocentering is available and * set the centering force to zero by default */ if (test_bit(FF_AUTOCENTER, dev->ffbit)) { - if(rev_maj == FFEX_REV_MAJ && rev_min == FFEX_REV_MIN) /* Formula Force EX expects different autocentering command */ + if (rev_maj == FFEX_REV_MAJ && rev_min == FFEX_REV_MIN) /* Formula Force EX expects different autocentering command */ dev->ff->set_autocenter = hid_lg4ff_set_autocenter_ffex; else dev->ff->set_autocenter = hid_lg4ff_set_autocenter_default; @@ -524,6 +587,7 @@ int lg4ff_init(struct hid_device *hid) } drv_data->device_props = entry; + entry->product_id = lg4ff_devices[i].product_id; entry->min_range = lg4ff_devices[i].min_range; entry->max_range = lg4ff_devices[i].max_range; entry->set_range = lg4ff_devices[i].set_range; @@ -534,6 +598,18 @@ int lg4ff_init(struct hid_device *hid) return error; dbg_hid("sysfs interface created\n"); + /* Set default axes parameters */ + switch (lg4ff_devices[i].product_id) { + case USB_DEVICE_ID_LOGITECH_DFP_WHEEL: + dbg_hid("Setting axes parameters for Driving Force Pro\n"); + input_set_abs_params(dev, ABS_X, DFP_X_MIN, DFP_X_MAX, 0, 0); + input_set_abs_params(dev, ABS_Y, DFP_PEDAL_MIN, DFP_PEDAL_MAX, 0, 0); + input_set_abs_params(dev, ABS_RZ, DFP_PEDAL_MIN, DFP_PEDAL_MAX, 0, 0); + break; + default: + break; + } + /* Set the maximum range to start with */ entry->range = entry->max_range; if (entry->set_range != NULL) @@ -594,6 +670,8 @@ out: return 0; } + + int lg4ff_deinit(struct hid_device *hid) { struct lg4ff_device_entry *entry; diff --git a/drivers/hid/hid-magicmouse.c b/drivers/hid/hid-magicmouse.c index 73647266daa..25ddf3e3aec 100644 --- a/drivers/hid/hid-magicmouse.c +++ b/drivers/hid/hid-magicmouse.c @@ -392,7 +392,7 @@ static int magicmouse_setup_input(struct input_dev *input, struct hid_device *hd __set_bit(EV_ABS, input->evbit); - error = input_mt_init_slots(input, 16); + error = input_mt_init_slots(input, 16, 0); if (error) return error; input_set_abs_params(input, ABS_MT_TOUCH_MAJOR, 0, 255 << 2, diff --git a/drivers/hid/hid-microsoft.c b/drivers/hid/hid-microsoft.c index e5c699b6c6f..3acdcfcc17d 100644 --- a/drivers/hid/hid-microsoft.c +++ b/drivers/hid/hid-microsoft.c @@ -5,7 +5,6 @@ * Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@suse.cz> * Copyright (c) 2005 Michael Haboustak <mike-@cinci.rr.com> for Concept2, Inc * Copyright (c) 2006-2007 Jiri Kosina - * Copyright (c) 2007 Paul Walmsley * Copyright (c) 2008 Jiri Slaby */ diff --git a/drivers/hid/hid-monterey.c b/drivers/hid/hid-monterey.c index dedf757781a..cd3643e06fa 100644 --- a/drivers/hid/hid-monterey.c +++ b/drivers/hid/hid-monterey.c @@ -5,7 +5,6 @@ * Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@suse.cz> * Copyright (c) 2005 Michael Haboustak <mike-@cinci.rr.com> for Concept2, Inc * Copyright (c) 2006-2007 Jiri Kosina - * Copyright (c) 2007 Paul Walmsley * Copyright (c) 2008 Jiri Slaby */ diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c index 59c8b5c1d2d..3eb02b94fc8 100644 --- a/drivers/hid/hid-multitouch.c +++ b/drivers/hid/hid-multitouch.c @@ -51,12 +51,12 @@ MODULE_LICENSE("GPL"); #define MT_QUIRK_VALID_IS_INRANGE (1 << 5) #define MT_QUIRK_VALID_IS_CONFIDENCE (1 << 6) #define MT_QUIRK_SLOT_IS_CONTACTID_MINUS_ONE (1 << 8) +#define MT_QUIRK_NO_AREA (1 << 9) struct mt_slot { __s32 x, y, p, w, h; __s32 contactid; /* the device ContactID assigned to this slot */ bool touch_state; /* is the touch valid? */ - bool seen_in_this_frame;/* has this slot been updated */ }; struct mt_class { @@ -92,8 +92,9 @@ struct mt_device { __u8 touches_by_report; /* how many touches are present in one report: * 1 means we should use a serial protocol * > 1 means hybrid (multitouch) protocol */ + bool serial_maybe; /* need to check for serial protocol */ bool curvalid; /* is the current contact valid? */ - struct mt_slot *slots; + unsigned mt_flags; /* flags to pass to input-mt */ }; /* classes of device behavior */ @@ -115,6 +116,9 @@ struct mt_device { #define MT_CLS_EGALAX_SERIAL 0x0104 #define MT_CLS_TOPSEED 0x0105 #define MT_CLS_PANASONIC 0x0106 +#define MT_CLS_FLATFROG 0x0107 +#define MT_CLS_GENERALTOUCH_TWOFINGERS 0x0108 +#define MT_CLS_GENERALTOUCH_PWT_TENFINGERS 0x0109 #define MT_DEFAULT_MAXCONTACT 10 @@ -134,25 +138,6 @@ static int cypress_compute_slot(struct mt_device *td) return -1; } -static int find_slot_from_contactid(struct mt_device *td) -{ - int i; - for (i = 0; i < td->maxcontacts; ++i) { - if (td->slots[i].contactid == td->curdata.contactid && - td->slots[i].touch_state) - return i; - } - for (i = 0; i < td->maxcontacts; ++i) { - if (!td->slots[i].seen_in_this_frame && - !td->slots[i].touch_state) - return i; - } - /* should not occurs. If this happens that means - * that the device sent more touches that it says - * in the report descriptor. It is ignored then. */ - return -1; -} - static struct mt_class mt_classes[] = { { .name = MT_CLS_DEFAULT, .quirks = MT_QUIRK_NOT_SEEN_MEANS_UP }, @@ -190,7 +175,9 @@ static struct mt_class mt_classes[] = { MT_QUIRK_SLOT_IS_CONTACTID, .sn_move = 2048, .sn_width = 128, - .sn_height = 128 }, + .sn_height = 128, + .maxcontacts = 60, + }, { .name = MT_CLS_CYPRESS, .quirks = MT_QUIRK_NOT_SEEN_MEANS_UP | MT_QUIRK_CYPRESS, @@ -215,7 +202,24 @@ static struct mt_class mt_classes[] = { { .name = MT_CLS_PANASONIC, .quirks = MT_QUIRK_NOT_SEEN_MEANS_UP, .maxcontacts = 4 }, + { .name = MT_CLS_GENERALTOUCH_TWOFINGERS, + .quirks = MT_QUIRK_NOT_SEEN_MEANS_UP | + MT_QUIRK_VALID_IS_INRANGE | + MT_QUIRK_SLOT_IS_CONTACTNUMBER, + .maxcontacts = 2 + }, + { .name = MT_CLS_GENERALTOUCH_PWT_TENFINGERS, + .quirks = MT_QUIRK_NOT_SEEN_MEANS_UP | + MT_QUIRK_SLOT_IS_CONTACTNUMBER, + .maxcontacts = 10 + }, + { .name = MT_CLS_FLATFROG, + .quirks = MT_QUIRK_NOT_SEEN_MEANS_UP | + MT_QUIRK_NO_AREA, + .sn_move = 2048, + .maxcontacts = 40, + }, { } }; @@ -319,24 +323,16 @@ static int mt_input_mapping(struct hid_device *hdev, struct hid_input *hi, * We need to ignore fields that belong to other collections * such as Mouse that might have the same GenericDesktop usages. */ if (field->application == HID_DG_TOUCHSCREEN) - set_bit(INPUT_PROP_DIRECT, hi->input->propbit); + td->mt_flags |= INPUT_MT_DIRECT; else if (field->application != HID_DG_TOUCHPAD) return 0; - /* In case of an indirect device (touchpad), we need to add - * specific BTN_TOOL_* to be handled by the synaptics xorg - * driver. - * We also consider that touchscreens providing buttons are touchpads. + /* + * Model touchscreens providing buttons as touchpads. */ if (field->application == HID_DG_TOUCHPAD || - (usage->hid & HID_USAGE_PAGE) == HID_UP_BUTTON || - cls->is_indirect) { - set_bit(INPUT_PROP_POINTER, hi->input->propbit); - set_bit(BTN_TOOL_FINGER, hi->input->keybit); - set_bit(BTN_TOOL_DOUBLETAP, hi->input->keybit); - set_bit(BTN_TOOL_TRIPLETAP, hi->input->keybit); - set_bit(BTN_TOOL_QUADTAP, hi->input->keybit); - } + (usage->hid & HID_USAGE_PAGE) == HID_UP_BUTTON) + td->mt_flags |= INPUT_MT_POINTER; /* eGalax devices provide a Digitizer.Stylus input which overrides * the correct Digitizers.Finger X/Y ranges. @@ -353,8 +349,6 @@ static int mt_input_mapping(struct hid_device *hdev, struct hid_input *hi, EV_ABS, ABS_MT_POSITION_X); set_abs(hi->input, ABS_MT_POSITION_X, field, cls->sn_move); - /* touchscreen emulation */ - set_abs(hi->input, ABS_X, field, cls->sn_move); mt_store_field(usage, td, hi); td->last_field_index = field->index; return 1; @@ -363,8 +357,6 @@ static int mt_input_mapping(struct hid_device *hdev, struct hid_input *hi, EV_ABS, ABS_MT_POSITION_Y); set_abs(hi->input, ABS_MT_POSITION_Y, field, cls->sn_move); - /* touchscreen emulation */ - set_abs(hi->input, ABS_Y, field, cls->sn_move); mt_store_field(usage, td, hi); td->last_field_index = field->index; return 1; @@ -388,9 +380,6 @@ static int mt_input_mapping(struct hid_device *hdev, struct hid_input *hi, td->last_field_index = field->index; return 1; case HID_DG_CONTACTID: - if (!td->maxcontacts) - td->maxcontacts = MT_DEFAULT_MAXCONTACT; - input_mt_init_slots(hi->input, td->maxcontacts); mt_store_field(usage, td, hi); td->last_field_index = field->index; td->touches_by_report++; @@ -398,18 +387,21 @@ static int mt_input_mapping(struct hid_device *hdev, struct hid_input *hi, case HID_DG_WIDTH: hid_map_usage(hi, usage, bit, max, EV_ABS, ABS_MT_TOUCH_MAJOR); - set_abs(hi->input, ABS_MT_TOUCH_MAJOR, field, - cls->sn_width); + if (!(cls->quirks & MT_QUIRK_NO_AREA)) + set_abs(hi->input, ABS_MT_TOUCH_MAJOR, field, + cls->sn_width); mt_store_field(usage, td, hi); td->last_field_index = field->index; return 1; case HID_DG_HEIGHT: hid_map_usage(hi, usage, bit, max, EV_ABS, ABS_MT_TOUCH_MINOR); - set_abs(hi->input, ABS_MT_TOUCH_MINOR, field, - cls->sn_height); - input_set_abs_params(hi->input, + if (!(cls->quirks & MT_QUIRK_NO_AREA)) { + set_abs(hi->input, ABS_MT_TOUCH_MINOR, field, + cls->sn_height); + input_set_abs_params(hi->input, ABS_MT_ORIENTATION, 0, 1, 0, 0); + } mt_store_field(usage, td, hi); td->last_field_index = field->index; return 1; @@ -418,9 +410,6 @@ static int mt_input_mapping(struct hid_device *hdev, struct hid_input *hi, EV_ABS, ABS_MT_PRESSURE); set_abs(hi->input, ABS_MT_PRESSURE, field, cls->sn_pressure); - /* touchscreen emulation */ - set_abs(hi->input, ABS_PRESSURE, field, - cls->sn_pressure); mt_store_field(usage, td, hi); td->last_field_index = field->index; return 1; @@ -464,7 +453,7 @@ static int mt_input_mapped(struct hid_device *hdev, struct hid_input *hi, return -1; } -static int mt_compute_slot(struct mt_device *td) +static int mt_compute_slot(struct mt_device *td, struct input_dev *input) { __s32 quirks = td->mtclass.quirks; @@ -480,42 +469,23 @@ static int mt_compute_slot(struct mt_device *td) if (quirks & MT_QUIRK_SLOT_IS_CONTACTID_MINUS_ONE) return td->curdata.contactid - 1; - return find_slot_from_contactid(td); + return input_mt_get_slot_by_key(input, td->curdata.contactid); } /* * this function is called when a whole contact has been processed, * so that it can assign it to a slot and store the data there */ -static void mt_complete_slot(struct mt_device *td) +static void mt_complete_slot(struct mt_device *td, struct input_dev *input) { - td->curdata.seen_in_this_frame = true; if (td->curvalid) { - int slotnum = mt_compute_slot(td); - - if (slotnum >= 0 && slotnum < td->maxcontacts) - td->slots[slotnum] = td->curdata; - } - td->num_received++; -} + int slotnum = mt_compute_slot(td, input); + struct mt_slot *s = &td->curdata; + if (slotnum < 0 || slotnum >= td->maxcontacts) + return; -/* - * this function is called when a whole packet has been received and processed, - * so that it can decide what to send to the input layer. - */ -static void mt_emit_event(struct mt_device *td, struct input_dev *input) -{ - int i; - - for (i = 0; i < td->maxcontacts; ++i) { - struct mt_slot *s = &(td->slots[i]); - if ((td->mtclass.quirks & MT_QUIRK_NOT_SEEN_MEANS_UP) && - !s->seen_in_this_frame) { - s->touch_state = false; - } - - input_mt_slot(input, i); + input_mt_slot(input, slotnum); input_mt_report_slot_state(input, MT_TOOL_FINGER, s->touch_state); if (s->touch_state) { @@ -532,24 +502,29 @@ static void mt_emit_event(struct mt_device *td, struct input_dev *input) input_event(input, EV_ABS, ABS_MT_TOUCH_MAJOR, major); input_event(input, EV_ABS, ABS_MT_TOUCH_MINOR, minor); } - s->seen_in_this_frame = false; - } - input_mt_report_pointer_emulation(input, true); + td->num_received++; +} + +/* + * this function is called when a whole packet has been received and processed, + * so that it can decide what to send to the input layer. + */ +static void mt_sync_frame(struct mt_device *td, struct input_dev *input) +{ + input_mt_sync_frame(input); input_sync(input); td->num_received = 0; } - - static int mt_event(struct hid_device *hid, struct hid_field *field, struct hid_usage *usage, __s32 value) { struct mt_device *td = hid_get_drvdata(hid); __s32 quirks = td->mtclass.quirks; - if (hid->claimed & HID_CLAIMED_INPUT && td->slots) { + if (hid->claimed & HID_CLAIMED_INPUT) { switch (usage->hid) { case HID_DG_INRANGE: if (quirks & MT_QUIRK_ALWAYS_VALID) @@ -602,11 +577,11 @@ static int mt_event(struct hid_device *hid, struct hid_field *field, } if (usage->hid == td->last_slot_field) - mt_complete_slot(td); + mt_complete_slot(td, field->hidinput->input); if (field->index == td->last_field_index && td->num_received >= td->num_expected) - mt_emit_event(td, field->hidinput->input); + mt_sync_frame(td, field->hidinput->input); } @@ -685,18 +660,45 @@ static void mt_post_parse(struct mt_device *td) } } +static void mt_input_configured(struct hid_device *hdev, struct hid_input *hi) + +{ + struct mt_device *td = hid_get_drvdata(hdev); + struct mt_class *cls = &td->mtclass; + struct input_dev *input = hi->input; + + /* Only initialize slots for MT input devices */ + if (!test_bit(ABS_MT_POSITION_X, input->absbit)) + return; + + if (!td->maxcontacts) + td->maxcontacts = MT_DEFAULT_MAXCONTACT; + + mt_post_parse(td); + if (td->serial_maybe) + mt_post_parse_default_settings(td); + + if (cls->is_indirect) + td->mt_flags |= INPUT_MT_POINTER; + + if (cls->quirks & MT_QUIRK_NOT_SEEN_MEANS_UP) + td->mt_flags |= INPUT_MT_DROP_UNUSED; + + input_mt_init_slots(input, td->maxcontacts, td->mt_flags); + + td->mt_flags = 0; +} + static int mt_probe(struct hid_device *hdev, const struct hid_device_id *id) { int ret, i; struct mt_device *td; struct mt_class *mtclass = mt_classes; /* MT_CLS_DEFAULT */ - if (id) { - for (i = 0; mt_classes[i].name ; i++) { - if (id->driver_data == mt_classes[i].name) { - mtclass = &(mt_classes[i]); - break; - } + for (i = 0; mt_classes[i].name ; i++) { + if (id->driver_data == mt_classes[i].name) { + mtclass = &(mt_classes[i]); + break; } } @@ -722,6 +724,9 @@ static int mt_probe(struct hid_device *hdev, const struct hid_device_id *id) goto fail; } + if (id->vendor == HID_ANY_ID && id->product == HID_ANY_ID) + td->serial_maybe = true; + ret = hid_parse(hdev); if (ret != 0) goto fail; @@ -730,20 +735,6 @@ static int mt_probe(struct hid_device *hdev, const struct hid_device_id *id) if (ret) goto fail; - mt_post_parse(td); - - if (id->vendor == HID_ANY_ID && id->product == HID_ANY_ID) - mt_post_parse_default_settings(td); - - td->slots = kzalloc(td->maxcontacts * sizeof(struct mt_slot), - GFP_KERNEL); - if (!td->slots) { - dev_err(&hdev->dev, "cannot allocate multitouch slots\n"); - hid_hw_stop(hdev); - ret = -ENOMEM; - goto fail; - } - ret = sysfs_create_group(&hdev->dev.kobj, &mt_attribute_group); mt_set_maxcontacts(hdev); @@ -767,6 +758,32 @@ static int mt_reset_resume(struct hid_device *hdev) mt_set_input_mode(hdev); return 0; } + +static int mt_resume(struct hid_device *hdev) +{ + struct usb_interface *intf; + struct usb_host_interface *interface; + struct usb_device *dev; + + if (hdev->bus != BUS_USB) + return 0; + + intf = to_usb_interface(hdev->dev.parent); + interface = intf->cur_altsetting; + dev = hid_to_usb_dev(hdev); + + /* Some Elan legacy devices require SET_IDLE to be set on resume. + * It should be safe to send it to other devices too. + * Tested on 3M, Stantum, Cypress, Zytronic, eGalax, and Elan panels. */ + + usb_control_msg(dev, usb_sndctrlpipe(dev, 0), + HID_REQ_SET_IDLE, + USB_TYPE_CLASS | USB_RECIP_INTERFACE, + 0, interface->desc.bInterfaceNumber, + NULL, 0, USB_CTRL_SET_TIMEOUT); + + return 0; +} #endif static void mt_remove(struct hid_device *hdev) @@ -774,7 +791,6 @@ static void mt_remove(struct hid_device *hdev) struct mt_device *td = hid_get_drvdata(hdev); sysfs_remove_group(&hdev->dev.kobj, &mt_attribute_group); hid_hw_stop(hdev); - kfree(td->slots); kfree(td); hid_set_drvdata(hdev, NULL); } @@ -885,17 +901,37 @@ static const struct hid_device_id mt_devices[] = { USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_7349) }, { .driver_data = MT_CLS_EGALAX_SERIAL, MT_USB_DEVICE(USB_VENDOR_ID_DWAV, + USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_73F7) }, + { .driver_data = MT_CLS_EGALAX_SERIAL, + MT_USB_DEVICE(USB_VENDOR_ID_DWAV, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_A001) }, + { .driver_data = MT_CLS_EGALAX, + HID_USB_DEVICE(USB_VENDOR_ID_DWAV, + USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_7224) }, + { .driver_data = MT_CLS_EGALAX, + HID_USB_DEVICE(USB_VENDOR_ID_DWAV, + USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_72D0) }, + { .driver_data = MT_CLS_EGALAX, + HID_USB_DEVICE(USB_VENDOR_ID_DWAV, + USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_72C4) }, /* Elo TouchSystems IntelliTouch Plus panel */ { .driver_data = MT_CLS_DUAL_NSMU_CONTACTID, MT_USB_DEVICE(USB_VENDOR_ID_ELO, USB_DEVICE_ID_ELO_TS2515) }, + /* Flatfrog Panels */ + { .driver_data = MT_CLS_FLATFROG, + MT_USB_DEVICE(USB_VENDOR_ID_FLATFROG, + USB_DEVICE_ID_MULTITOUCH_3200) }, + /* GeneralTouch panel */ - { .driver_data = MT_CLS_DUAL_INRANGE_CONTACTNUMBER, + { .driver_data = MT_CLS_GENERALTOUCH_TWOFINGERS, MT_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, USB_DEVICE_ID_GENERAL_TOUCH_WIN7_TWOFINGERS) }, + { .driver_data = MT_CLS_GENERALTOUCH_PWT_TENFINGERS, + MT_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, + USB_DEVICE_ID_GENERAL_TOUCH_WIN8_PWT_TENFINGERS) }, /* Gametel game controller */ { .driver_data = MT_CLS_DEFAULT, @@ -1087,11 +1123,13 @@ static struct hid_driver mt_driver = { .remove = mt_remove, .input_mapping = mt_input_mapping, .input_mapped = mt_input_mapped, + .input_configured = mt_input_configured, .feature_mapping = mt_feature_mapping, .usage_table = mt_grabbed_usages, .event = mt_event, #ifdef CONFIG_PM .reset_resume = mt_reset_resume, + .resume = mt_resume, #endif }; diff --git a/drivers/hid/hid-ntrig.c b/drivers/hid/hid-ntrig.c index 9fae2ebdd75..86a969f6329 100644 --- a/drivers/hid/hid-ntrig.c +++ b/drivers/hid/hid-ntrig.c @@ -882,10 +882,10 @@ static int ntrig_probe(struct hid_device *hdev, const struct hid_device_id *id) nd->activate_slack = activate_slack; nd->act_state = activate_slack; nd->deactivate_slack = -deactivate_slack; - nd->sensor_logical_width = 0; - nd->sensor_logical_height = 0; - nd->sensor_physical_width = 0; - nd->sensor_physical_height = 0; + nd->sensor_logical_width = 1; + nd->sensor_logical_height = 1; + nd->sensor_physical_width = 1; + nd->sensor_physical_height = 1; hid_set_drvdata(hdev, nd); diff --git a/drivers/hid/hid-petalynx.c b/drivers/hid/hid-petalynx.c index f1ea3ff8a98..4c521de4e7e 100644 --- a/drivers/hid/hid-petalynx.c +++ b/drivers/hid/hid-petalynx.c @@ -5,7 +5,6 @@ * Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@suse.cz> * Copyright (c) 2005 Michael Haboustak <mike-@cinci.rr.com> for Concept2, Inc * Copyright (c) 2006-2007 Jiri Kosina - * Copyright (c) 2007 Paul Walmsley * Copyright (c) 2008 Jiri Slaby */ diff --git a/drivers/hid/hid-picolcd.c b/drivers/hid/hid-picolcd.c deleted file mode 100644 index 27c8ebdfad0..00000000000 --- a/drivers/hid/hid-picolcd.c +++ /dev/null @@ -1,2748 +0,0 @@ -/*************************************************************************** - * Copyright (C) 2010 by Bruno Prémont <bonbons@linux-vserver.org> * - * * - * Based on Logitech G13 driver (v0.4) * - * Copyright (C) 2009 by Rick L. Vinyard, Jr. <rvinyard@cs.nmsu.edu> * - * * - * This program is free software: you can redistribute it and/or modify * - * it under the terms of the GNU General Public License as published by * - * the Free Software Foundation, version 2 of the License. * - * * - * This driver is distributed in the hope that it will be useful, but * - * WITHOUT ANY WARRANTY; without even the implied warranty of * - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * - * General Public License for more details. * - * * - * You should have received a copy of the GNU General Public License * - * along with this software. If not see <http://www.gnu.org/licenses/>. * - ***************************************************************************/ - -#include <linux/hid.h> -#include <linux/hid-debug.h> -#include <linux/input.h> -#include "hid-ids.h" -#include "usbhid/usbhid.h" -#include <linux/usb.h> - -#include <linux/fb.h> -#include <linux/vmalloc.h> -#include <linux/backlight.h> -#include <linux/lcd.h> - -#include <linux/leds.h> - -#include <linux/seq_file.h> -#include <linux/debugfs.h> - -#include <linux/completion.h> -#include <linux/uaccess.h> -#include <linux/module.h> - -#define PICOLCD_NAME "PicoLCD (graphic)" - -/* Report numbers */ -#define REPORT_ERROR_CODE 0x10 /* LCD: IN[16] */ -#define ERR_SUCCESS 0x00 -#define ERR_PARAMETER_MISSING 0x01 -#define ERR_DATA_MISSING 0x02 -#define ERR_BLOCK_READ_ONLY 0x03 -#define ERR_BLOCK_NOT_ERASABLE 0x04 -#define ERR_BLOCK_TOO_BIG 0x05 -#define ERR_SECTION_OVERFLOW 0x06 -#define ERR_INVALID_CMD_LEN 0x07 -#define ERR_INVALID_DATA_LEN 0x08 -#define REPORT_KEY_STATE 0x11 /* LCD: IN[2] */ -#define REPORT_IR_DATA 0x21 /* LCD: IN[63] */ -#define REPORT_EE_DATA 0x32 /* LCD: IN[63] */ -#define REPORT_MEMORY 0x41 /* LCD: IN[63] */ -#define REPORT_LED_STATE 0x81 /* LCD: OUT[1] */ -#define REPORT_BRIGHTNESS 0x91 /* LCD: OUT[1] */ -#define REPORT_CONTRAST 0x92 /* LCD: OUT[1] */ -#define REPORT_RESET 0x93 /* LCD: OUT[2] */ -#define REPORT_LCD_CMD 0x94 /* LCD: OUT[63] */ -#define REPORT_LCD_DATA 0x95 /* LCD: OUT[63] */ -#define REPORT_LCD_CMD_DATA 0x96 /* LCD: OUT[63] */ -#define REPORT_EE_READ 0xa3 /* LCD: OUT[63] */ -#define REPORT_EE_WRITE 0xa4 /* LCD: OUT[63] */ -#define REPORT_ERASE_MEMORY 0xb2 /* LCD: OUT[2] */ -#define REPORT_READ_MEMORY 0xb3 /* LCD: OUT[3] */ -#define REPORT_WRITE_MEMORY 0xb4 /* LCD: OUT[63] */ -#define REPORT_SPLASH_RESTART 0xc1 /* LCD: OUT[1] */ -#define REPORT_EXIT_KEYBOARD 0xef /* LCD: OUT[2] */ -#define REPORT_VERSION 0xf1 /* LCD: IN[2],OUT[1] Bootloader: IN[2],OUT[1] */ -#define REPORT_BL_ERASE_MEMORY 0xf2 /* Bootloader: IN[36],OUT[4] */ -#define REPORT_BL_READ_MEMORY 0xf3 /* Bootloader: IN[36],OUT[4] */ -#define REPORT_BL_WRITE_MEMORY 0xf4 /* Bootloader: IN[36],OUT[36] */ -#define REPORT_DEVID 0xf5 /* LCD: IN[5], OUT[1] Bootloader: IN[5],OUT[1] */ -#define REPORT_SPLASH_SIZE 0xf6 /* LCD: IN[4], OUT[1] */ -#define REPORT_HOOK_VERSION 0xf7 /* LCD: IN[2], OUT[1] */ -#define REPORT_EXIT_FLASHER 0xff /* Bootloader: OUT[2] */ - -#ifdef CONFIG_HID_PICOLCD_FB -/* Framebuffer - * - * The PicoLCD use a Topway LCD module of 256x64 pixel - * This display area is tiled over 4 controllers with 8 tiles - * each. Each tile has 8x64 pixel, each data byte representing - * a 1-bit wide vertical line of the tile. - * - * The display can be updated at a tile granularity. - * - * Chip 1 Chip 2 Chip 3 Chip 4 - * +----------------+----------------+----------------+----------------+ - * | Tile 1 | Tile 1 | Tile 1 | Tile 1 | - * +----------------+----------------+----------------+----------------+ - * | Tile 2 | Tile 2 | Tile 2 | Tile 2 | - * +----------------+----------------+----------------+----------------+ - * ... - * +----------------+----------------+----------------+----------------+ - * | Tile 8 | Tile 8 | Tile 8 | Tile 8 | - * +----------------+----------------+----------------+----------------+ - */ -#define PICOLCDFB_NAME "picolcdfb" -#define PICOLCDFB_WIDTH (256) -#define PICOLCDFB_HEIGHT (64) -#define PICOLCDFB_SIZE (PICOLCDFB_WIDTH * PICOLCDFB_HEIGHT / 8) - -#define PICOLCDFB_UPDATE_RATE_LIMIT 10 -#define PICOLCDFB_UPDATE_RATE_DEFAULT 2 - -/* Framebuffer visual structures */ -static const struct fb_fix_screeninfo picolcdfb_fix = { - .id = PICOLCDFB_NAME, - .type = FB_TYPE_PACKED_PIXELS, - .visual = FB_VISUAL_MONO01, - .xpanstep = 0, - .ypanstep = 0, - .ywrapstep = 0, - .line_length = PICOLCDFB_WIDTH / 8, - .accel = FB_ACCEL_NONE, -}; - -static const struct fb_var_screeninfo picolcdfb_var = { - .xres = PICOLCDFB_WIDTH, - .yres = PICOLCDFB_HEIGHT, - .xres_virtual = PICOLCDFB_WIDTH, - .yres_virtual = PICOLCDFB_HEIGHT, - .width = 103, - .height = 26, - .bits_per_pixel = 1, - .grayscale = 1, - .red = { - .offset = 0, - .length = 1, - .msb_right = 0, - }, - .green = { - .offset = 0, - .length = 1, - .msb_right = 0, - }, - .blue = { - .offset = 0, - .length = 1, - .msb_right = 0, - }, - .transp = { - .offset = 0, - .length = 0, - .msb_right = 0, - }, -}; -#endif /* CONFIG_HID_PICOLCD_FB */ - -/* Input device - * - * The PicoLCD has an IR receiver header, a built-in keypad with 5 keys - * and header for 4x4 key matrix. The built-in keys are part of the matrix. - */ -static const unsigned short def_keymap[] = { - KEY_RESERVED, /* none */ - KEY_BACK, /* col 4 + row 1 */ - KEY_HOMEPAGE, /* col 3 + row 1 */ - KEY_RESERVED, /* col 2 + row 1 */ - KEY_RESERVED, /* col 1 + row 1 */ - KEY_SCROLLUP, /* col 4 + row 2 */ - KEY_OK, /* col 3 + row 2 */ - KEY_SCROLLDOWN, /* col 2 + row 2 */ - KEY_RESERVED, /* col 1 + row 2 */ - KEY_RESERVED, /* col 4 + row 3 */ - KEY_RESERVED, /* col 3 + row 3 */ - KEY_RESERVED, /* col 2 + row 3 */ - KEY_RESERVED, /* col 1 + row 3 */ - KEY_RESERVED, /* col 4 + row 4 */ - KEY_RESERVED, /* col 3 + row 4 */ - KEY_RESERVED, /* col 2 + row 4 */ - KEY_RESERVED, /* col 1 + row 4 */ -}; -#define PICOLCD_KEYS ARRAY_SIZE(def_keymap) - -/* Description of in-progress IO operation, used for operations - * that trigger response from device */ -struct picolcd_pending { - struct hid_report *out_report; - struct hid_report *in_report; - struct completion ready; - int raw_size; - u8 raw_data[64]; -}; - -/* Per device data structure */ -struct picolcd_data { - struct hid_device *hdev; -#ifdef CONFIG_DEBUG_FS - struct dentry *debug_reset; - struct dentry *debug_eeprom; - struct dentry *debug_flash; - struct mutex mutex_flash; - int addr_sz; -#endif - u8 version[2]; - unsigned short opmode_delay; - /* input stuff */ - u8 pressed_keys[2]; - struct input_dev *input_keys; - struct input_dev *input_cir; - unsigned short keycode[PICOLCD_KEYS]; - -#ifdef CONFIG_HID_PICOLCD_FB - /* Framebuffer stuff */ - u8 fb_update_rate; - u8 fb_bpp; - u8 fb_force; - u8 *fb_vbitmap; /* local copy of what was sent to PicoLCD */ - u8 *fb_bitmap; /* framebuffer */ - struct fb_info *fb_info; - struct fb_deferred_io fb_defio; -#endif /* CONFIG_HID_PICOLCD_FB */ -#ifdef CONFIG_HID_PICOLCD_LCD - struct lcd_device *lcd; - u8 lcd_contrast; -#endif /* CONFIG_HID_PICOLCD_LCD */ -#ifdef CONFIG_HID_PICOLCD_BACKLIGHT - struct backlight_device *backlight; - u8 lcd_brightness; - u8 lcd_power; -#endif /* CONFIG_HID_PICOLCD_BACKLIGHT */ -#ifdef CONFIG_HID_PICOLCD_LEDS - /* LED stuff */ - u8 led_state; - struct led_classdev *led[8]; -#endif /* CONFIG_HID_PICOLCD_LEDS */ - - /* Housekeeping stuff */ - spinlock_t lock; - struct mutex mutex; - struct picolcd_pending *pending; - int status; -#define PICOLCD_BOOTLOADER 1 -#define PICOLCD_FAILED 2 -#define PICOLCD_READY_FB 4 -}; - - -/* Find a given report */ -#define picolcd_in_report(id, dev) picolcd_report(id, dev, HID_INPUT_REPORT) -#define picolcd_out_report(id, dev) picolcd_report(id, dev, HID_OUTPUT_REPORT) - -static struct hid_report *picolcd_report(int id, struct hid_device *hdev, int dir) -{ - struct list_head *feature_report_list = &hdev->report_enum[dir].report_list; - struct hid_report *report = NULL; - - list_for_each_entry(report, feature_report_list, list) { - if (report->id == id) - return report; - } - hid_warn(hdev, "No report with id 0x%x found\n", id); - return NULL; -} - -#ifdef CONFIG_DEBUG_FS -static void picolcd_debug_out_report(struct picolcd_data *data, - struct hid_device *hdev, struct hid_report *report); -#define usbhid_submit_report(a, b, c) \ - do { \ - picolcd_debug_out_report(hid_get_drvdata(a), a, b); \ - usbhid_submit_report(a, b, c); \ - } while (0) -#endif - -/* Submit a report and wait for a reply from device - if device fades away - * or does not respond in time, return NULL */ -static struct picolcd_pending *picolcd_send_and_wait(struct hid_device *hdev, - int report_id, const u8 *raw_data, int size) -{ - struct picolcd_data *data = hid_get_drvdata(hdev); - struct picolcd_pending *work; - struct hid_report *report = picolcd_out_report(report_id, hdev); - unsigned long flags; - int i, j, k; - - if (!report || !data) - return NULL; - if (data->status & PICOLCD_FAILED) - return NULL; - work = kzalloc(sizeof(*work), GFP_KERNEL); - if (!work) - return NULL; - - init_completion(&work->ready); - work->out_report = report; - work->in_report = NULL; - work->raw_size = 0; - - mutex_lock(&data->mutex); - spin_lock_irqsave(&data->lock, flags); - for (i = k = 0; i < report->maxfield; i++) - for (j = 0; j < report->field[i]->report_count; j++) { - hid_set_field(report->field[i], j, k < size ? raw_data[k] : 0); - k++; - } - data->pending = work; - usbhid_submit_report(data->hdev, report, USB_DIR_OUT); - spin_unlock_irqrestore(&data->lock, flags); - wait_for_completion_interruptible_timeout(&work->ready, HZ*2); - spin_lock_irqsave(&data->lock, flags); - data->pending = NULL; - spin_unlock_irqrestore(&data->lock, flags); - mutex_unlock(&data->mutex); - return work; -} - -#ifdef CONFIG_HID_PICOLCD_FB -/* Send a given tile to PicoLCD */ -static int picolcd_fb_send_tile(struct hid_device *hdev, int chip, int tile) -{ - struct picolcd_data *data = hid_get_drvdata(hdev); - struct hid_report *report1 = picolcd_out_report(REPORT_LCD_CMD_DATA, hdev); - struct hid_report *report2 = picolcd_out_report(REPORT_LCD_DATA, hdev); - unsigned long flags; - u8 *tdata; - int i; - - if (!report1 || report1->maxfield != 1 || !report2 || report2->maxfield != 1) - return -ENODEV; - - spin_lock_irqsave(&data->lock, flags); - hid_set_field(report1->field[0], 0, chip << 2); - hid_set_field(report1->field[0], 1, 0x02); - hid_set_field(report1->field[0], 2, 0x00); - hid_set_field(report1->field[0], 3, 0x00); - hid_set_field(report1->field[0], 4, 0xb8 | tile); - hid_set_field(report1->field[0], 5, 0x00); - hid_set_field(report1->field[0], 6, 0x00); - hid_set_field(report1->field[0], 7, 0x40); - hid_set_field(report1->field[0], 8, 0x00); - hid_set_field(report1->field[0], 9, 0x00); - hid_set_field(report1->field[0], 10, 32); - - hid_set_field(report2->field[0], 0, (chip << 2) | 0x01); - hid_set_field(report2->field[0], 1, 0x00); - hid_set_field(report2->field[0], 2, 0x00); - hid_set_field(report2->field[0], 3, 32); - - tdata = data->fb_vbitmap + (tile * 4 + chip) * 64; - for (i = 0; i < 64; i++) - if (i < 32) - hid_set_field(report1->field[0], 11 + i, tdata[i]); - else - hid_set_field(report2->field[0], 4 + i - 32, tdata[i]); - - usbhid_submit_report(data->hdev, report1, USB_DIR_OUT); - usbhid_submit_report(data->hdev, report2, USB_DIR_OUT); - spin_unlock_irqrestore(&data->lock, flags); - return 0; -} - -/* Translate a single tile*/ -static int picolcd_fb_update_tile(u8 *vbitmap, const u8 *bitmap, int bpp, - int chip, int tile) -{ - int i, b, changed = 0; - u8 tdata[64]; - u8 *vdata = vbitmap + (tile * 4 + chip) * 64; - - if (bpp == 1) { - for (b = 7; b >= 0; b--) { - const u8 *bdata = bitmap + tile * 256 + chip * 8 + b * 32; - for (i = 0; i < 64; i++) { - tdata[i] <<= 1; - tdata[i] |= (bdata[i/8] >> (i % 8)) & 0x01; - } - } - } else if (bpp == 8) { - for (b = 7; b >= 0; b--) { - const u8 *bdata = bitmap + (tile * 256 + chip * 8 + b * 32) * 8; - for (i = 0; i < 64; i++) { - tdata[i] <<= 1; - tdata[i] |= (bdata[i] & 0x80) ? 0x01 : 0x00; - } - } - } else { - /* Oops, we should never get here! */ - WARN_ON(1); - return 0; - } - - for (i = 0; i < 64; i++) - if (tdata[i] != vdata[i]) { - changed = 1; - vdata[i] = tdata[i]; - } - return changed; -} - -/* Reconfigure LCD display */ -static int picolcd_fb_reset(struct picolcd_data *data, int clear) -{ - struct hid_report *report = picolcd_out_report(REPORT_LCD_CMD, data->hdev); - int i, j; - unsigned long flags; - static const u8 mapcmd[8] = { 0x00, 0x02, 0x00, 0x64, 0x3f, 0x00, 0x64, 0xc0 }; - - if (!report || report->maxfield != 1) - return -ENODEV; - - spin_lock_irqsave(&data->lock, flags); - for (i = 0; i < 4; i++) { - for (j = 0; j < report->field[0]->maxusage; j++) - if (j == 0) - hid_set_field(report->field[0], j, i << 2); - else if (j < sizeof(mapcmd)) - hid_set_field(report->field[0], j, mapcmd[j]); - else - hid_set_field(report->field[0], j, 0); - usbhid_submit_report(data->hdev, report, USB_DIR_OUT); - } - - data->status |= PICOLCD_READY_FB; - spin_unlock_irqrestore(&data->lock, flags); - - if (data->fb_bitmap) { - if (clear) { - memset(data->fb_vbitmap, 0, PICOLCDFB_SIZE); - memset(data->fb_bitmap, 0, PICOLCDFB_SIZE*data->fb_bpp); - } - data->fb_force = 1; - } - - /* schedule first output of framebuffer */ - if (data->fb_info) - schedule_delayed_work(&data->fb_info->deferred_work, 0); - - return 0; -} - -/* Update fb_vbitmap from the screen_base and send changed tiles to device */ -static void picolcd_fb_update(struct picolcd_data *data) -{ - int chip, tile, n; - unsigned long flags; - - if (!data) - return; - - spin_lock_irqsave(&data->lock, flags); - if (!(data->status & PICOLCD_READY_FB)) { - spin_unlock_irqrestore(&data->lock, flags); - picolcd_fb_reset(data, 0); - } else { - spin_unlock_irqrestore(&data->lock, flags); - } - - /* - * Translate the framebuffer into the format needed by the PicoLCD. - * See display layout above. - * Do this one tile after the other and push those tiles that changed. - * - * Wait for our IO to complete as otherwise we might flood the queue! - */ - n = 0; - for (chip = 0; chip < 4; chip++) - for (tile = 0; tile < 8; tile++) - if (picolcd_fb_update_tile(data->fb_vbitmap, - data->fb_bitmap, data->fb_bpp, chip, tile) || - data->fb_force) { - n += 2; - if (!data->fb_info->par) - return; /* device lost! */ - if (n >= HID_OUTPUT_FIFO_SIZE / 2) { - usbhid_wait_io(data->hdev); - n = 0; - } - picolcd_fb_send_tile(data->hdev, chip, tile); - } - data->fb_force = false; - if (n) - usbhid_wait_io(data->hdev); -} - -/* Stub to call the system default and update the image on the picoLCD */ -static void picolcd_fb_fillrect(struct fb_info *info, - const struct fb_fillrect *rect) -{ - if (!info->par) - return; - sys_fillrect(info, rect); - - schedule_delayed_work(&info->deferred_work, 0); -} - -/* Stub to call the system default and update the image on the picoLCD */ -static void picolcd_fb_copyarea(struct fb_info *info, - const struct fb_copyarea *area) -{ - if (!info->par) - return; - sys_copyarea(info, area); - - schedule_delayed_work(&info->deferred_work, 0); -} - -/* Stub to call the system default and update the image on the picoLCD */ -static void picolcd_fb_imageblit(struct fb_info *info, const struct fb_image *image) -{ - if (!info->par) - return; - sys_imageblit(info, image); - - schedule_delayed_work(&info->deferred_work, 0); -} - -/* - * this is the slow path from userspace. they can seek and write to - * the fb. it's inefficient to do anything less than a full screen draw - */ -static ssize_t picolcd_fb_write(struct fb_info *info, const char __user *buf, - size_t count, loff_t *ppos) -{ - ssize_t ret; - if (!info->par) - return -ENODEV; - ret = fb_sys_write(info, buf, count, ppos); - if (ret >= 0) - schedule_delayed_work(&info->deferred_work, 0); - return ret; -} - -static int picolcd_fb_blank(int blank, struct fb_info *info) -{ - if (!info->par) - return -ENODEV; - /* We let fb notification do this for us via lcd/backlight device */ - return 0; -} - -static void picolcd_fb_destroy(struct fb_info *info) -{ - struct picolcd_data *data = info->par; - u32 *ref_cnt = info->pseudo_palette; - int may_release; - - info->par = NULL; - if (data) - data->fb_info = NULL; - fb_deferred_io_cleanup(info); - - ref_cnt--; - mutex_lock(&info->lock); - (*ref_cnt)--; - may_release = !*ref_cnt; - mutex_unlock(&info->lock); - if (may_release) { - vfree((u8 *)info->fix.smem_start); - framebuffer_release(info); - } -} - -static int picolcd_fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) -{ - __u32 bpp = var->bits_per_pixel; - __u32 activate = var->activate; - - /* only allow 1/8 bit depth (8-bit is grayscale) */ - *var = picolcdfb_var; - var->activate = activate; - if (bpp >= 8) { - var->bits_per_pixel = 8; - var->red.length = 8; - var->green.length = 8; - var->blue.length = 8; - } else { - var->bits_per_pixel = 1; - var->red.length = 1; - var->green.length = 1; - var->blue.length = 1; - } - return 0; -} - -static int picolcd_set_par(struct fb_info *info) -{ - struct picolcd_data *data = info->par; - u8 *tmp_fb, *o_fb; - if (!data) - return -ENODEV; - if (info->var.bits_per_pixel == data->fb_bpp) - return 0; - /* switch between 1/8 bit depths */ - if (info->var.bits_per_pixel != 1 && info->var.bits_per_pixel != 8) - return -EINVAL; - - o_fb = data->fb_bitmap; - tmp_fb = kmalloc(PICOLCDFB_SIZE*info->var.bits_per_pixel, GFP_KERNEL); - if (!tmp_fb) - return -ENOMEM; - - /* translate FB content to new bits-per-pixel */ - if (info->var.bits_per_pixel == 1) { - int i, b; - for (i = 0; i < PICOLCDFB_SIZE; i++) { - u8 p = 0; - for (b = 0; b < 8; b++) { - p <<= 1; - p |= o_fb[i*8+b] ? 0x01 : 0x00; - } - tmp_fb[i] = p; - } - memcpy(o_fb, tmp_fb, PICOLCDFB_SIZE); - info->fix.visual = FB_VISUAL_MONO01; - info->fix.line_length = PICOLCDFB_WIDTH / 8; - } else { - int i; - memcpy(tmp_fb, o_fb, PICOLCDFB_SIZE); - for (i = 0; i < PICOLCDFB_SIZE * 8; i++) - o_fb[i] = tmp_fb[i/8] & (0x01 << (7 - i % 8)) ? 0xff : 0x00; - info->fix.visual = FB_VISUAL_DIRECTCOLOR; - info->fix.line_length = PICOLCDFB_WIDTH; - } - - kfree(tmp_fb); - data->fb_bpp = info->var.bits_per_pixel; - return 0; -} - -/* Do refcounting on our FB and cleanup per worker if FB is - * closed after unplug of our device - * (fb_release holds info->lock and still touches info after - * we return so we can't release it immediately. - */ -struct picolcd_fb_cleanup_item { - struct fb_info *info; - struct picolcd_fb_cleanup_item *next; -}; -static struct picolcd_fb_cleanup_item *fb_pending; -static DEFINE_SPINLOCK(fb_pending_lock); - -static void picolcd_fb_do_cleanup(struct work_struct *data) -{ - struct picolcd_fb_cleanup_item *item; - unsigned long flags; - - do { - spin_lock_irqsave(&fb_pending_lock, flags); - item = fb_pending; - fb_pending = item ? item->next : NULL; - spin_unlock_irqrestore(&fb_pending_lock, flags); - - if (item) { - u8 *fb = (u8 *)item->info->fix.smem_start; - /* make sure we do not race against fb core when - * releasing */ - mutex_lock(&item->info->lock); - mutex_unlock(&item->info->lock); - framebuffer_release(item->info); - vfree(fb); - } - } while (item); -} - -static DECLARE_WORK(picolcd_fb_cleanup, picolcd_fb_do_cleanup); - -static int picolcd_fb_open(struct fb_info *info, int u) -{ - u32 *ref_cnt = info->pseudo_palette; - ref_cnt--; - - (*ref_cnt)++; - return 0; -} - -static int picolcd_fb_release(struct fb_info *info, int u) -{ - u32 *ref_cnt = info->pseudo_palette; - ref_cnt--; - - (*ref_cnt)++; - if (!*ref_cnt) { - unsigned long flags; - struct picolcd_fb_cleanup_item *item = (struct picolcd_fb_cleanup_item *)ref_cnt; - item--; - spin_lock_irqsave(&fb_pending_lock, flags); - item->next = fb_pending; - fb_pending = item; - spin_unlock_irqrestore(&fb_pending_lock, flags); - schedule_work(&picolcd_fb_cleanup); - } - return 0; -} - -/* Note this can't be const because of struct fb_info definition */ -static struct fb_ops picolcdfb_ops = { - .owner = THIS_MODULE, - .fb_destroy = picolcd_fb_destroy, - .fb_open = picolcd_fb_open, - .fb_release = picolcd_fb_release, - .fb_read = fb_sys_read, - .fb_write = picolcd_fb_write, - .fb_blank = picolcd_fb_blank, - .fb_fillrect = picolcd_fb_fillrect, - .fb_copyarea = picolcd_fb_copyarea, - .fb_imageblit = picolcd_fb_imageblit, - .fb_check_var = picolcd_fb_check_var, - .fb_set_par = picolcd_set_par, -}; - - -/* Callback from deferred IO workqueue */ -static void picolcd_fb_deferred_io(struct fb_info *info, struct list_head *pagelist) -{ - picolcd_fb_update(info->par); -} - -static const struct fb_deferred_io picolcd_fb_defio = { - .delay = HZ / PICOLCDFB_UPDATE_RATE_DEFAULT, - .deferred_io = picolcd_fb_deferred_io, -}; - - -/* - * The "fb_update_rate" sysfs attribute - */ -static ssize_t picolcd_fb_update_rate_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct picolcd_data *data = dev_get_drvdata(dev); - unsigned i, fb_update_rate = data->fb_update_rate; - size_t ret = 0; - - for (i = 1; i <= PICOLCDFB_UPDATE_RATE_LIMIT; i++) - if (ret >= PAGE_SIZE) - break; - else if (i == fb_update_rate) - ret += snprintf(buf+ret, PAGE_SIZE-ret, "[%u] ", i); - else - ret += snprintf(buf+ret, PAGE_SIZE-ret, "%u ", i); - if (ret > 0) - buf[min(ret, (size_t)PAGE_SIZE)-1] = '\n'; - return ret; -} - -static ssize_t picolcd_fb_update_rate_store(struct device *dev, - struct device_attribute *attr, const char *buf, size_t count) -{ - struct picolcd_data *data = dev_get_drvdata(dev); - int i; - unsigned u; - - if (count < 1 || count > 10) - return -EINVAL; - - i = sscanf(buf, "%u", &u); - if (i != 1) - return -EINVAL; - - if (u > PICOLCDFB_UPDATE_RATE_LIMIT) - return -ERANGE; - else if (u == 0) - u = PICOLCDFB_UPDATE_RATE_DEFAULT; - - data->fb_update_rate = u; - data->fb_defio.delay = HZ / data->fb_update_rate; - return count; -} - -static DEVICE_ATTR(fb_update_rate, 0666, picolcd_fb_update_rate_show, - picolcd_fb_update_rate_store); - -/* initialize Framebuffer device */ -static int picolcd_init_framebuffer(struct picolcd_data *data) -{ - struct device *dev = &data->hdev->dev; - struct fb_info *info = NULL; - int i, error = -ENOMEM; - u8 *fb_vbitmap = NULL; - u8 *fb_bitmap = NULL; - u32 *palette; - - fb_bitmap = vmalloc(PICOLCDFB_SIZE*8); - if (fb_bitmap == NULL) { - dev_err(dev, "can't get a free page for framebuffer\n"); - goto err_nomem; - } - - fb_vbitmap = kmalloc(PICOLCDFB_SIZE, GFP_KERNEL); - if (fb_vbitmap == NULL) { - dev_err(dev, "can't alloc vbitmap image buffer\n"); - goto err_nomem; - } - - data->fb_update_rate = PICOLCDFB_UPDATE_RATE_DEFAULT; - data->fb_defio = picolcd_fb_defio; - /* The extra memory is: - * - struct picolcd_fb_cleanup_item - * - u32 for ref_count - * - 256*u32 for pseudo_palette - */ - info = framebuffer_alloc(257 * sizeof(u32) + sizeof(struct picolcd_fb_cleanup_item), dev); - if (info == NULL) { - dev_err(dev, "failed to allocate a framebuffer\n"); - goto err_nomem; - } - - palette = info->par + sizeof(struct picolcd_fb_cleanup_item); - *palette = 1; - palette++; - for (i = 0; i < 256; i++) - palette[i] = i > 0 && i < 16 ? 0xff : 0; - info->pseudo_palette = palette; - info->fbdefio = &data->fb_defio; - info->screen_base = (char __force __iomem *)fb_bitmap; - info->fbops = &picolcdfb_ops; - info->var = picolcdfb_var; - info->fix = picolcdfb_fix; - info->fix.smem_len = PICOLCDFB_SIZE*8; - info->fix.smem_start = (unsigned long)fb_bitmap; - info->par = data; - info->flags = FBINFO_FLAG_DEFAULT; - - data->fb_vbitmap = fb_vbitmap; - data->fb_bitmap = fb_bitmap; - data->fb_bpp = picolcdfb_var.bits_per_pixel; - error = picolcd_fb_reset(data, 1); - if (error) { - dev_err(dev, "failed to configure display\n"); - goto err_cleanup; - } - error = device_create_file(dev, &dev_attr_fb_update_rate); - if (error) { - dev_err(dev, "failed to create sysfs attributes\n"); - goto err_cleanup; - } - fb_deferred_io_init(info); - data->fb_info = info; - error = register_framebuffer(info); - if (error) { - dev_err(dev, "failed to register framebuffer\n"); - goto err_sysfs; - } - /* schedule first output of framebuffer */ - data->fb_force = 1; - schedule_delayed_work(&info->deferred_work, 0); - return 0; - -err_sysfs: - fb_deferred_io_cleanup(info); - device_remove_file(dev, &dev_attr_fb_update_rate); -err_cleanup: - data->fb_vbitmap = NULL; - data->fb_bitmap = NULL; - data->fb_bpp = 0; - data->fb_info = NULL; - -err_nomem: - framebuffer_release(info); - vfree(fb_bitmap); - kfree(fb_vbitmap); - return error; -} - -static void picolcd_exit_framebuffer(struct picolcd_data *data) -{ - struct fb_info *info = data->fb_info; - u8 *fb_vbitmap = data->fb_vbitmap; - - if (!info) - return; - - info->par = NULL; - device_remove_file(&data->hdev->dev, &dev_attr_fb_update_rate); - unregister_framebuffer(info); - data->fb_vbitmap = NULL; - data->fb_bitmap = NULL; - data->fb_bpp = 0; - data->fb_info = NULL; - kfree(fb_vbitmap); -} - -#define picolcd_fbinfo(d) ((d)->fb_info) -#else -static inline int picolcd_fb_reset(struct picolcd_data *data, int clear) -{ - return 0; -} -static inline int picolcd_init_framebuffer(struct picolcd_data *data) -{ - return 0; -} -static inline void picolcd_exit_framebuffer(struct picolcd_data *data) -{ -} -#define picolcd_fbinfo(d) NULL -#endif /* CONFIG_HID_PICOLCD_FB */ - -#ifdef CONFIG_HID_PICOLCD_BACKLIGHT -/* - * backlight class device - */ -static int picolcd_get_brightness(struct backlight_device *bdev) -{ - struct picolcd_data *data = bl_get_data(bdev); - return data->lcd_brightness; -} - -static int picolcd_set_brightness(struct backlight_device *bdev) -{ - struct picolcd_data *data = bl_get_data(bdev); - struct hid_report *report = picolcd_out_report(REPORT_BRIGHTNESS, data->hdev); - unsigned long flags; - - if (!report || report->maxfield != 1 || report->field[0]->report_count != 1) - return -ENODEV; - - data->lcd_brightness = bdev->props.brightness & 0x0ff; - data->lcd_power = bdev->props.power; - spin_lock_irqsave(&data->lock, flags); - hid_set_field(report->field[0], 0, data->lcd_power == FB_BLANK_UNBLANK ? data->lcd_brightness : 0); - usbhid_submit_report(data->hdev, report, USB_DIR_OUT); - spin_unlock_irqrestore(&data->lock, flags); - return 0; -} - -static int picolcd_check_bl_fb(struct backlight_device *bdev, struct fb_info *fb) -{ - return fb && fb == picolcd_fbinfo((struct picolcd_data *)bl_get_data(bdev)); -} - -static const struct backlight_ops picolcd_blops = { - .update_status = picolcd_set_brightness, - .get_brightness = picolcd_get_brightness, - .check_fb = picolcd_check_bl_fb, -}; - -static int picolcd_init_backlight(struct picolcd_data *data, struct hid_report *report) -{ - struct device *dev = &data->hdev->dev; - struct backlight_device *bdev; - struct backlight_properties props; - if (!report) - return -ENODEV; - if (report->maxfield != 1 || report->field[0]->report_count != 1 || - report->field[0]->report_size != 8) { - dev_err(dev, "unsupported BRIGHTNESS report"); - return -EINVAL; - } - - memset(&props, 0, sizeof(props)); - props.type = BACKLIGHT_RAW; - props.max_brightness = 0xff; - bdev = backlight_device_register(dev_name(dev), dev, data, - &picolcd_blops, &props); - if (IS_ERR(bdev)) { - dev_err(dev, "failed to register backlight\n"); - return PTR_ERR(bdev); - } - bdev->props.brightness = 0xff; - data->lcd_brightness = 0xff; - data->backlight = bdev; - picolcd_set_brightness(bdev); - return 0; -} - -static void picolcd_exit_backlight(struct picolcd_data *data) -{ - struct backlight_device *bdev = data->backlight; - - data->backlight = NULL; - if (bdev) - backlight_device_unregister(bdev); -} - -static inline int picolcd_resume_backlight(struct picolcd_data *data) -{ - if (!data->backlight) - return 0; - return picolcd_set_brightness(data->backlight); -} - -#ifdef CONFIG_PM -static void picolcd_suspend_backlight(struct picolcd_data *data) -{ - int bl_power = data->lcd_power; - if (!data->backlight) - return; - - data->backlight->props.power = FB_BLANK_POWERDOWN; - picolcd_set_brightness(data->backlight); - data->lcd_power = data->backlight->props.power = bl_power; -} -#endif /* CONFIG_PM */ -#else -static inline int picolcd_init_backlight(struct picolcd_data *data, - struct hid_report *report) -{ - return 0; -} -static inline void picolcd_exit_backlight(struct picolcd_data *data) -{ -} -static inline int picolcd_resume_backlight(struct picolcd_data *data) -{ - return 0; -} -static inline void picolcd_suspend_backlight(struct picolcd_data *data) -{ -} -#endif /* CONFIG_HID_PICOLCD_BACKLIGHT */ - -#ifdef CONFIG_HID_PICOLCD_LCD -/* - * lcd class device - */ -static int picolcd_get_contrast(struct lcd_device *ldev) -{ - struct picolcd_data *data = lcd_get_data(ldev); - return data->lcd_contrast; -} - -static int picolcd_set_contrast(struct lcd_device *ldev, int contrast) -{ - struct picolcd_data *data = lcd_get_data(ldev); - struct hid_report *report = picolcd_out_report(REPORT_CONTRAST, data->hdev); - unsigned long flags; - - if (!report || report->maxfield != 1 || report->field[0]->report_count != 1) - return -ENODEV; - - data->lcd_contrast = contrast & 0x0ff; - spin_lock_irqsave(&data->lock, flags); - hid_set_field(report->field[0], 0, data->lcd_contrast); - usbhid_submit_report(data->hdev, report, USB_DIR_OUT); - spin_unlock_irqrestore(&data->lock, flags); - return 0; -} - -static int picolcd_check_lcd_fb(struct lcd_device *ldev, struct fb_info *fb) -{ - return fb && fb == picolcd_fbinfo((struct picolcd_data *)lcd_get_data(ldev)); -} - -static struct lcd_ops picolcd_lcdops = { - .get_contrast = picolcd_get_contrast, - .set_contrast = picolcd_set_contrast, - .check_fb = picolcd_check_lcd_fb, -}; - -static int picolcd_init_lcd(struct picolcd_data *data, struct hid_report *report) -{ - struct device *dev = &data->hdev->dev; - struct lcd_device *ldev; - - if (!report) - return -ENODEV; - if (report->maxfield != 1 || report->field[0]->report_count != 1 || - report->field[0]->report_size != 8) { - dev_err(dev, "unsupported CONTRAST report"); - return -EINVAL; - } - - ldev = lcd_device_register(dev_name(dev), dev, data, &picolcd_lcdops); - if (IS_ERR(ldev)) { - dev_err(dev, "failed to register LCD\n"); - return PTR_ERR(ldev); - } - ldev->props.max_contrast = 0x0ff; - data->lcd_contrast = 0xe5; - data->lcd = ldev; - picolcd_set_contrast(ldev, 0xe5); - return 0; -} - -static void picolcd_exit_lcd(struct picolcd_data *data) -{ - struct lcd_device *ldev = data->lcd; - - data->lcd = NULL; - if (ldev) - lcd_device_unregister(ldev); -} - -static inline int picolcd_resume_lcd(struct picolcd_data *data) -{ - if (!data->lcd) - return 0; - return picolcd_set_contrast(data->lcd, data->lcd_contrast); -} -#else -static inline int picolcd_init_lcd(struct picolcd_data *data, - struct hid_report *report) -{ - return 0; -} -static inline void picolcd_exit_lcd(struct picolcd_data *data) -{ -} -static inline int picolcd_resume_lcd(struct picolcd_data *data) -{ - return 0; -} -#endif /* CONFIG_HID_PICOLCD_LCD */ - -#ifdef CONFIG_HID_PICOLCD_LEDS -/** - * LED class device - */ -static void picolcd_leds_set(struct picolcd_data *data) -{ - struct hid_report *report; - unsigned long flags; - - if (!data->led[0]) - return; - report = picolcd_out_report(REPORT_LED_STATE, data->hdev); - if (!report || report->maxfield != 1 || report->field[0]->report_count != 1) - return; - - spin_lock_irqsave(&data->lock, flags); - hid_set_field(report->field[0], 0, data->led_state); - usbhid_submit_report(data->hdev, report, USB_DIR_OUT); - spin_unlock_irqrestore(&data->lock, flags); -} - -static void picolcd_led_set_brightness(struct led_classdev *led_cdev, - enum led_brightness value) -{ - struct device *dev; - struct hid_device *hdev; - struct picolcd_data *data; - int i, state = 0; - - dev = led_cdev->dev->parent; - hdev = container_of(dev, struct hid_device, dev); - data = hid_get_drvdata(hdev); - for (i = 0; i < 8; i++) { - if (led_cdev != data->led[i]) - continue; - state = (data->led_state >> i) & 1; - if (value == LED_OFF && state) { - data->led_state &= ~(1 << i); - picolcd_leds_set(data); - } else if (value != LED_OFF && !state) { - data->led_state |= 1 << i; - picolcd_leds_set(data); - } - break; - } -} - -static enum led_brightness picolcd_led_get_brightness(struct led_classdev *led_cdev) -{ - struct device *dev; - struct hid_device *hdev; - struct picolcd_data *data; - int i, value = 0; - - dev = led_cdev->dev->parent; - hdev = container_of(dev, struct hid_device, dev); - data = hid_get_drvdata(hdev); - for (i = 0; i < 8; i++) - if (led_cdev == data->led[i]) { - value = (data->led_state >> i) & 1; - break; - } - return value ? LED_FULL : LED_OFF; -} - -static int picolcd_init_leds(struct picolcd_data *data, struct hid_report *report) -{ - struct device *dev = &data->hdev->dev; - struct led_classdev *led; - size_t name_sz = strlen(dev_name(dev)) + 8; - char *name; - int i, ret = 0; - - if (!report) - return -ENODEV; - if (report->maxfield != 1 || report->field[0]->report_count != 1 || - report->field[0]->report_size != 8) { - dev_err(dev, "unsupported LED_STATE report"); - return -EINVAL; - } - - for (i = 0; i < 8; i++) { - led = kzalloc(sizeof(struct led_classdev)+name_sz, GFP_KERNEL); - if (!led) { - dev_err(dev, "can't allocate memory for LED %d\n", i); - ret = -ENOMEM; - goto err; - } - name = (void *)(&led[1]); - snprintf(name, name_sz, "%s::GPO%d", dev_name(dev), i); - led->name = name; - led->brightness = 0; - led->max_brightness = 1; - led->brightness_get = picolcd_led_get_brightness; - led->brightness_set = picolcd_led_set_brightness; - - data->led[i] = led; - ret = led_classdev_register(dev, data->led[i]); - if (ret) { - data->led[i] = NULL; - kfree(led); - dev_err(dev, "can't register LED %d\n", i); - goto err; - } - } - return 0; -err: - for (i = 0; i < 8; i++) - if (data->led[i]) { - led = data->led[i]; - data->led[i] = NULL; - led_classdev_unregister(led); - kfree(led); - } - return ret; -} - -static void picolcd_exit_leds(struct picolcd_data *data) -{ - struct led_classdev *led; - int i; - - for (i = 0; i < 8; i++) { - led = data->led[i]; - data->led[i] = NULL; - if (!led) - continue; - led_classdev_unregister(led); - kfree(led); - } -} - -#else -static inline int picolcd_init_leds(struct picolcd_data *data, - struct hid_report *report) -{ - return 0; -} -static inline void picolcd_exit_leds(struct picolcd_data *data) -{ -} -static inline int picolcd_leds_set(struct picolcd_data *data) -{ - return 0; -} -#endif /* CONFIG_HID_PICOLCD_LEDS */ - -/* - * input class device - */ -static int picolcd_raw_keypad(struct picolcd_data *data, - struct hid_report *report, u8 *raw_data, int size) -{ - /* - * Keypad event - * First and second data bytes list currently pressed keys, - * 0x00 means no key and at most 2 keys may be pressed at same time - */ - int i, j; - - /* determine newly pressed keys */ - for (i = 0; i < size; i++) { - unsigned int key_code; - if (raw_data[i] == 0) - continue; - for (j = 0; j < sizeof(data->pressed_keys); j++) - if (data->pressed_keys[j] == raw_data[i]) - goto key_already_down; - for (j = 0; j < sizeof(data->pressed_keys); j++) - if (data->pressed_keys[j] == 0) { - data->pressed_keys[j] = raw_data[i]; - break; - } - input_event(data->input_keys, EV_MSC, MSC_SCAN, raw_data[i]); - if (raw_data[i] < PICOLCD_KEYS) - key_code = data->keycode[raw_data[i]]; - else - key_code = KEY_UNKNOWN; - if (key_code != KEY_UNKNOWN) { - dbg_hid(PICOLCD_NAME " got key press for %u:%d", - raw_data[i], key_code); - input_report_key(data->input_keys, key_code, 1); - } - input_sync(data->input_keys); -key_already_down: - continue; - } - - /* determine newly released keys */ - for (j = 0; j < sizeof(data->pressed_keys); j++) { - unsigned int key_code; - if (data->pressed_keys[j] == 0) - continue; - for (i = 0; i < size; i++) - if (data->pressed_keys[j] == raw_data[i]) - goto key_still_down; - input_event(data->input_keys, EV_MSC, MSC_SCAN, data->pressed_keys[j]); - if (data->pressed_keys[j] < PICOLCD_KEYS) - key_code = data->keycode[data->pressed_keys[j]]; - else - key_code = KEY_UNKNOWN; - if (key_code != KEY_UNKNOWN) { - dbg_hid(PICOLCD_NAME " got key release for %u:%d", - data->pressed_keys[j], key_code); - input_report_key(data->input_keys, key_code, 0); - } - input_sync(data->input_keys); - data->pressed_keys[j] = 0; -key_still_down: - continue; - } - return 1; -} - -static int picolcd_raw_cir(struct picolcd_data *data, - struct hid_report *report, u8 *raw_data, int size) -{ - /* Need understanding of CIR data format to implement ... */ - return 1; -} - -static int picolcd_check_version(struct hid_device *hdev) -{ - struct picolcd_data *data = hid_get_drvdata(hdev); - struct picolcd_pending *verinfo; - int ret = 0; - - if (!data) - return -ENODEV; - - verinfo = picolcd_send_and_wait(hdev, REPORT_VERSION, NULL, 0); - if (!verinfo) { - hid_err(hdev, "no version response from PicoLCD\n"); - return -ENODEV; - } - - if (verinfo->raw_size == 2) { - data->version[0] = verinfo->raw_data[1]; - data->version[1] = verinfo->raw_data[0]; - if (data->status & PICOLCD_BOOTLOADER) { - hid_info(hdev, "PicoLCD, bootloader version %d.%d\n", - verinfo->raw_data[1], verinfo->raw_data[0]); - } else { - hid_info(hdev, "PicoLCD, firmware version %d.%d\n", - verinfo->raw_data[1], verinfo->raw_data[0]); - } - } else { - hid_err(hdev, "confused, got unexpected version response from PicoLCD\n"); - ret = -EINVAL; - } - kfree(verinfo); - return ret; -} - -/* - * Reset our device and wait for answer to VERSION request - */ -static int picolcd_reset(struct hid_device *hdev) -{ - struct picolcd_data *data = hid_get_drvdata(hdev); - struct hid_report *report = picolcd_out_report(REPORT_RESET, hdev); - unsigned long flags; - int error; - - if (!data || !report || report->maxfield != 1) - return -ENODEV; - - spin_lock_irqsave(&data->lock, flags); - if (hdev->product == USB_DEVICE_ID_PICOLCD_BOOTLOADER) - data->status |= PICOLCD_BOOTLOADER; - - /* perform the reset */ - hid_set_field(report->field[0], 0, 1); - usbhid_submit_report(hdev, report, USB_DIR_OUT); - spin_unlock_irqrestore(&data->lock, flags); - - error = picolcd_check_version(hdev); - if (error) - return error; - - picolcd_resume_lcd(data); - picolcd_resume_backlight(data); -#ifdef CONFIG_HID_PICOLCD_FB - if (data->fb_info) - schedule_delayed_work(&data->fb_info->deferred_work, 0); -#endif /* CONFIG_HID_PICOLCD_FB */ - - picolcd_leds_set(data); - return 0; -} - -/* - * The "operation_mode" sysfs attribute - */ -static ssize_t picolcd_operation_mode_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct picolcd_data *data = dev_get_drvdata(dev); - - if (data->status & PICOLCD_BOOTLOADER) - return snprintf(buf, PAGE_SIZE, "[bootloader] lcd\n"); - else - return snprintf(buf, PAGE_SIZE, "bootloader [lcd]\n"); -} - -static ssize_t picolcd_operation_mode_store(struct device *dev, - struct device_attribute *attr, const char *buf, size_t count) -{ - struct picolcd_data *data = dev_get_drvdata(dev); - struct hid_report *report = NULL; - size_t cnt = count; - int timeout = data->opmode_delay; - unsigned long flags; - - if (cnt >= 3 && strncmp("lcd", buf, 3) == 0) { - if (data->status & PICOLCD_BOOTLOADER) - report = picolcd_out_report(REPORT_EXIT_FLASHER, data->hdev); - buf += 3; - cnt -= 3; - } else if (cnt >= 10 && strncmp("bootloader", buf, 10) == 0) { - if (!(data->status & PICOLCD_BOOTLOADER)) - report = picolcd_out_report(REPORT_EXIT_KEYBOARD, data->hdev); - buf += 10; - cnt -= 10; - } - if (!report) - return -EINVAL; - - while (cnt > 0 && (buf[cnt-1] == '\n' || buf[cnt-1] == '\r')) - cnt--; - if (cnt != 0) - return -EINVAL; - - spin_lock_irqsave(&data->lock, flags); - hid_set_field(report->field[0], 0, timeout & 0xff); - hid_set_field(report->field[0], 1, (timeout >> 8) & 0xff); - usbhid_submit_report(data->hdev, report, USB_DIR_OUT); - spin_unlock_irqrestore(&data->lock, flags); - return count; -} - -static DEVICE_ATTR(operation_mode, 0644, picolcd_operation_mode_show, - picolcd_operation_mode_store); - -/* - * The "operation_mode_delay" sysfs attribute - */ -static ssize_t picolcd_operation_mode_delay_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct picolcd_data *data = dev_get_drvdata(dev); - - return snprintf(buf, PAGE_SIZE, "%hu\n", data->opmode_delay); -} - -static ssize_t picolcd_operation_mode_delay_store(struct device *dev, - struct device_attribute *attr, const char *buf, size_t count) -{ - struct picolcd_data *data = dev_get_drvdata(dev); - unsigned u; - if (sscanf(buf, "%u", &u) != 1) - return -EINVAL; - if (u > 30000) - return -EINVAL; - else - data->opmode_delay = u; - return count; -} - -static DEVICE_ATTR(operation_mode_delay, 0644, picolcd_operation_mode_delay_show, - picolcd_operation_mode_delay_store); - - -#ifdef CONFIG_DEBUG_FS -/* - * The "reset" file - */ -static int picolcd_debug_reset_show(struct seq_file *f, void *p) -{ - if (picolcd_fbinfo((struct picolcd_data *)f->private)) - seq_printf(f, "all fb\n"); - else - seq_printf(f, "all\n"); - return 0; -} - -static int picolcd_debug_reset_open(struct inode *inode, struct file *f) -{ - return single_open(f, picolcd_debug_reset_show, inode->i_private); -} - -static ssize_t picolcd_debug_reset_write(struct file *f, const char __user *user_buf, - size_t count, loff_t *ppos) -{ - struct picolcd_data *data = ((struct seq_file *)f->private_data)->private; - char buf[32]; - size_t cnt = min(count, sizeof(buf)-1); - if (copy_from_user(buf, user_buf, cnt)) - return -EFAULT; - - while (cnt > 0 && (buf[cnt-1] == ' ' || buf[cnt-1] == '\n')) - cnt--; - buf[cnt] = '\0'; - if (strcmp(buf, "all") == 0) { - picolcd_reset(data->hdev); - picolcd_fb_reset(data, 1); - } else if (strcmp(buf, "fb") == 0) { - picolcd_fb_reset(data, 1); - } else { - return -EINVAL; - } - return count; -} - -static const struct file_operations picolcd_debug_reset_fops = { - .owner = THIS_MODULE, - .open = picolcd_debug_reset_open, - .read = seq_read, - .llseek = seq_lseek, - .write = picolcd_debug_reset_write, - .release = single_release, -}; - -/* - * The "eeprom" file - */ -static ssize_t picolcd_debug_eeprom_read(struct file *f, char __user *u, - size_t s, loff_t *off) -{ - struct picolcd_data *data = f->private_data; - struct picolcd_pending *resp; - u8 raw_data[3]; - ssize_t ret = -EIO; - - if (s == 0) - return -EINVAL; - if (*off > 0x0ff) - return 0; - - /* prepare buffer with info about what we want to read (addr & len) */ - raw_data[0] = *off & 0xff; - raw_data[1] = (*off >> 8) & 0xff; - raw_data[2] = s < 20 ? s : 20; - if (*off + raw_data[2] > 0xff) - raw_data[2] = 0x100 - *off; - resp = picolcd_send_and_wait(data->hdev, REPORT_EE_READ, raw_data, - sizeof(raw_data)); - if (!resp) - return -EIO; - - if (resp->in_report && resp->in_report->id == REPORT_EE_DATA) { - /* successful read :) */ - ret = resp->raw_data[2]; - if (ret > s) - ret = s; - if (copy_to_user(u, resp->raw_data+3, ret)) - ret = -EFAULT; - else - *off += ret; - } /* anything else is some kind of IO error */ - - kfree(resp); - return ret; -} - -static ssize_t picolcd_debug_eeprom_write(struct file *f, const char __user *u, - size_t s, loff_t *off) -{ - struct picolcd_data *data = f->private_data; - struct picolcd_pending *resp; - ssize_t ret = -EIO; - u8 raw_data[23]; - - if (s == 0) - return -EINVAL; - if (*off > 0x0ff) - return -ENOSPC; - - memset(raw_data, 0, sizeof(raw_data)); - raw_data[0] = *off & 0xff; - raw_data[1] = (*off >> 8) & 0xff; - raw_data[2] = min((size_t)20, s); - if (*off + raw_data[2] > 0xff) - raw_data[2] = 0x100 - *off; - - if (copy_from_user(raw_data+3, u, min((u8)20, raw_data[2]))) - return -EFAULT; - resp = picolcd_send_and_wait(data->hdev, REPORT_EE_WRITE, raw_data, - sizeof(raw_data)); - - if (!resp) - return -EIO; - - if (resp->in_report && resp->in_report->id == REPORT_EE_DATA) { - /* check if written data matches */ - if (memcmp(raw_data, resp->raw_data, 3+raw_data[2]) == 0) { - *off += raw_data[2]; - ret = raw_data[2]; - } - } - kfree(resp); - return ret; -} - -/* - * Notes: - * - read/write happens in chunks of at most 20 bytes, it's up to userspace - * to loop in order to get more data. - * - on write errors on otherwise correct write request the bytes - * that should have been written are in undefined state. - */ -static const struct file_operations picolcd_debug_eeprom_fops = { - .owner = THIS_MODULE, - .open = simple_open, - .read = picolcd_debug_eeprom_read, - .write = picolcd_debug_eeprom_write, - .llseek = generic_file_llseek, -}; - -/* - * The "flash" file - */ -/* record a flash address to buf (bounds check to be done by caller) */ -static int _picolcd_flash_setaddr(struct picolcd_data *data, u8 *buf, long off) -{ - buf[0] = off & 0xff; - buf[1] = (off >> 8) & 0xff; - if (data->addr_sz == 3) - buf[2] = (off >> 16) & 0xff; - return data->addr_sz == 2 ? 2 : 3; -} - -/* read a given size of data (bounds check to be done by caller) */ -static ssize_t _picolcd_flash_read(struct picolcd_data *data, int report_id, - char __user *u, size_t s, loff_t *off) -{ - struct picolcd_pending *resp; - u8 raw_data[4]; - ssize_t ret = 0; - int len_off, err = -EIO; - - while (s > 0) { - err = -EIO; - len_off = _picolcd_flash_setaddr(data, raw_data, *off); - raw_data[len_off] = s > 32 ? 32 : s; - resp = picolcd_send_and_wait(data->hdev, report_id, raw_data, len_off+1); - if (!resp || !resp->in_report) - goto skip; - if (resp->in_report->id == REPORT_MEMORY || - resp->in_report->id == REPORT_BL_READ_MEMORY) { - if (memcmp(raw_data, resp->raw_data, len_off+1) != 0) - goto skip; - if (copy_to_user(u+ret, resp->raw_data+len_off+1, raw_data[len_off])) { - err = -EFAULT; - goto skip; - } - *off += raw_data[len_off]; - s -= raw_data[len_off]; - ret += raw_data[len_off]; - err = 0; - } -skip: - kfree(resp); - if (err) - return ret > 0 ? ret : err; - } - return ret; -} - -static ssize_t picolcd_debug_flash_read(struct file *f, char __user *u, - size_t s, loff_t *off) -{ - struct picolcd_data *data = f->private_data; - - if (s == 0) - return -EINVAL; - if (*off > 0x05fff) - return 0; - if (*off + s > 0x05fff) - s = 0x06000 - *off; - - if (data->status & PICOLCD_BOOTLOADER) - return _picolcd_flash_read(data, REPORT_BL_READ_MEMORY, u, s, off); - else - return _picolcd_flash_read(data, REPORT_READ_MEMORY, u, s, off); -} - -/* erase block aligned to 64bytes boundary */ -static ssize_t _picolcd_flash_erase64(struct picolcd_data *data, int report_id, - loff_t *off) -{ - struct picolcd_pending *resp; - u8 raw_data[3]; - int len_off; - ssize_t ret = -EIO; - - if (*off & 0x3f) - return -EINVAL; - - len_off = _picolcd_flash_setaddr(data, raw_data, *off); - resp = picolcd_send_and_wait(data->hdev, report_id, raw_data, len_off); - if (!resp || !resp->in_report) - goto skip; - if (resp->in_report->id == REPORT_MEMORY || - resp->in_report->id == REPORT_BL_ERASE_MEMORY) { - if (memcmp(raw_data, resp->raw_data, len_off) != 0) - goto skip; - ret = 0; - } -skip: - kfree(resp); - return ret; -} - -/* write a given size of data (bounds check to be done by caller) */ -static ssize_t _picolcd_flash_write(struct picolcd_data *data, int report_id, - const char __user *u, size_t s, loff_t *off) -{ - struct picolcd_pending *resp; - u8 raw_data[36]; - ssize_t ret = 0; - int len_off, err = -EIO; - - while (s > 0) { - err = -EIO; - len_off = _picolcd_flash_setaddr(data, raw_data, *off); - raw_data[len_off] = s > 32 ? 32 : s; - if (copy_from_user(raw_data+len_off+1, u, raw_data[len_off])) { - err = -EFAULT; - break; - } - resp = picolcd_send_and_wait(data->hdev, report_id, raw_data, - len_off+1+raw_data[len_off]); - if (!resp || !resp->in_report) - goto skip; - if (resp->in_report->id == REPORT_MEMORY || - resp->in_report->id == REPORT_BL_WRITE_MEMORY) { - if (memcmp(raw_data, resp->raw_data, len_off+1+raw_data[len_off]) != 0) - goto skip; - *off += raw_data[len_off]; - s -= raw_data[len_off]; - ret += raw_data[len_off]; - err = 0; - } -skip: - kfree(resp); - if (err) - break; - } - return ret > 0 ? ret : err; -} - -static ssize_t picolcd_debug_flash_write(struct file *f, const char __user *u, - size_t s, loff_t *off) -{ - struct picolcd_data *data = f->private_data; - ssize_t err, ret = 0; - int report_erase, report_write; - - if (s == 0) - return -EINVAL; - if (*off > 0x5fff) - return -ENOSPC; - if (s & 0x3f) - return -EINVAL; - if (*off & 0x3f) - return -EINVAL; - - if (data->status & PICOLCD_BOOTLOADER) { - report_erase = REPORT_BL_ERASE_MEMORY; - report_write = REPORT_BL_WRITE_MEMORY; - } else { - report_erase = REPORT_ERASE_MEMORY; - report_write = REPORT_WRITE_MEMORY; - } - mutex_lock(&data->mutex_flash); - while (s > 0) { - err = _picolcd_flash_erase64(data, report_erase, off); - if (err) - break; - err = _picolcd_flash_write(data, report_write, u, 64, off); - if (err < 0) - break; - ret += err; - *off += err; - s -= err; - if (err != 64) - break; - } - mutex_unlock(&data->mutex_flash); - return ret > 0 ? ret : err; -} - -/* - * Notes: - * - concurrent writing is prevented by mutex and all writes must be - * n*64 bytes and 64-byte aligned, each write being preceded by an - * ERASE which erases a 64byte block. - * If less than requested was written or an error is returned for an - * otherwise correct write request the next 64-byte block which should - * have been written is in undefined state (mostly: original, erased, - * (half-)written with write error) - * - reading can happen without special restriction - */ -static const struct file_operations picolcd_debug_flash_fops = { - .owner = THIS_MODULE, - .open = simple_open, - .read = picolcd_debug_flash_read, - .write = picolcd_debug_flash_write, - .llseek = generic_file_llseek, -}; - - -/* - * Helper code for HID report level dumping/debugging - */ -static const char *error_codes[] = { - "success", "parameter missing", "data_missing", "block readonly", - "block not erasable", "block too big", "section overflow", - "invalid command length", "invalid data length", -}; - -static void dump_buff_as_hex(char *dst, size_t dst_sz, const u8 *data, - const size_t data_len) -{ - int i, j; - for (i = j = 0; i < data_len && j + 3 < dst_sz; i++) { - dst[j++] = hex_asc[(data[i] >> 4) & 0x0f]; - dst[j++] = hex_asc[data[i] & 0x0f]; - dst[j++] = ' '; - } - if (j < dst_sz) { - dst[j--] = '\0'; - dst[j] = '\n'; - } else - dst[j] = '\0'; -} - -static void picolcd_debug_out_report(struct picolcd_data *data, - struct hid_device *hdev, struct hid_report *report) -{ - u8 raw_data[70]; - int raw_size = (report->size >> 3) + 1; - char *buff; -#define BUFF_SZ 256 - - /* Avoid unnecessary overhead if debugfs is disabled */ - if (list_empty(&hdev->debug_list)) - return; - - buff = kmalloc(BUFF_SZ, GFP_ATOMIC); - if (!buff) - return; - - snprintf(buff, BUFF_SZ, "\nout report %d (size %d) = ", - report->id, raw_size); - hid_debug_event(hdev, buff); - if (raw_size + 5 > sizeof(raw_data)) { - kfree(buff); - hid_debug_event(hdev, " TOO BIG\n"); - return; - } else { - raw_data[0] = report->id; - hid_output_report(report, raw_data); - dump_buff_as_hex(buff, BUFF_SZ, raw_data, raw_size); - hid_debug_event(hdev, buff); - } - - switch (report->id) { - case REPORT_LED_STATE: - /* 1 data byte with GPO state */ - snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", - "REPORT_LED_STATE", report->id, raw_size-1); - hid_debug_event(hdev, buff); - snprintf(buff, BUFF_SZ, "\tGPO state: 0x%02x\n", raw_data[1]); - hid_debug_event(hdev, buff); - break; - case REPORT_BRIGHTNESS: - /* 1 data byte with brightness */ - snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", - "REPORT_BRIGHTNESS", report->id, raw_size-1); - hid_debug_event(hdev, buff); - snprintf(buff, BUFF_SZ, "\tBrightness: 0x%02x\n", raw_data[1]); - hid_debug_event(hdev, buff); - break; - case REPORT_CONTRAST: - /* 1 data byte with contrast */ - snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", - "REPORT_CONTRAST", report->id, raw_size-1); - hid_debug_event(hdev, buff); - snprintf(buff, BUFF_SZ, "\tContrast: 0x%02x\n", raw_data[1]); - hid_debug_event(hdev, buff); - break; - case REPORT_RESET: - /* 2 data bytes with reset duration in ms */ - snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", - "REPORT_RESET", report->id, raw_size-1); - hid_debug_event(hdev, buff); - snprintf(buff, BUFF_SZ, "\tDuration: 0x%02x%02x (%dms)\n", - raw_data[2], raw_data[1], raw_data[2] << 8 | raw_data[1]); - hid_debug_event(hdev, buff); - break; - case REPORT_LCD_CMD: - /* 63 data bytes with LCD commands */ - snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", - "REPORT_LCD_CMD", report->id, raw_size-1); - hid_debug_event(hdev, buff); - /* TODO: format decoding */ - break; - case REPORT_LCD_DATA: - /* 63 data bytes with LCD data */ - snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", - "REPORT_LCD_CMD", report->id, raw_size-1); - /* TODO: format decoding */ - hid_debug_event(hdev, buff); - break; - case REPORT_LCD_CMD_DATA: - /* 63 data bytes with LCD commands and data */ - snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", - "REPORT_LCD_CMD", report->id, raw_size-1); - /* TODO: format decoding */ - hid_debug_event(hdev, buff); - break; - case REPORT_EE_READ: - /* 3 data bytes with read area description */ - snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", - "REPORT_EE_READ", report->id, raw_size-1); - hid_debug_event(hdev, buff); - snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x\n", - raw_data[2], raw_data[1]); - hid_debug_event(hdev, buff); - snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[3]); - hid_debug_event(hdev, buff); - break; - case REPORT_EE_WRITE: - /* 3+1..20 data bytes with write area description */ - snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", - "REPORT_EE_WRITE", report->id, raw_size-1); - hid_debug_event(hdev, buff); - snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x\n", - raw_data[2], raw_data[1]); - hid_debug_event(hdev, buff); - snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[3]); - hid_debug_event(hdev, buff); - if (raw_data[3] == 0) { - snprintf(buff, BUFF_SZ, "\tNo data\n"); - } else if (raw_data[3] + 4 <= raw_size) { - snprintf(buff, BUFF_SZ, "\tData: "); - hid_debug_event(hdev, buff); - dump_buff_as_hex(buff, BUFF_SZ, raw_data+4, raw_data[3]); - } else { - snprintf(buff, BUFF_SZ, "\tData overflowed\n"); - } - hid_debug_event(hdev, buff); - break; - case REPORT_ERASE_MEMORY: - case REPORT_BL_ERASE_MEMORY: - /* 3 data bytes with pointer inside erase block */ - snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", - "REPORT_ERASE_MEMORY", report->id, raw_size-1); - hid_debug_event(hdev, buff); - switch (data->addr_sz) { - case 2: - snprintf(buff, BUFF_SZ, "\tAddress inside 64 byte block: 0x%02x%02x\n", - raw_data[2], raw_data[1]); - break; - case 3: - snprintf(buff, BUFF_SZ, "\tAddress inside 64 byte block: 0x%02x%02x%02x\n", - raw_data[3], raw_data[2], raw_data[1]); - break; - default: - snprintf(buff, BUFF_SZ, "\tNot supported\n"); - } - hid_debug_event(hdev, buff); - break; - case REPORT_READ_MEMORY: - case REPORT_BL_READ_MEMORY: - /* 4 data bytes with read area description */ - snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", - "REPORT_READ_MEMORY", report->id, raw_size-1); - hid_debug_event(hdev, buff); - switch (data->addr_sz) { - case 2: - snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x\n", - raw_data[2], raw_data[1]); - hid_debug_event(hdev, buff); - snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[3]); - break; - case 3: - snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x%02x\n", - raw_data[3], raw_data[2], raw_data[1]); - hid_debug_event(hdev, buff); - snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[4]); - break; - default: - snprintf(buff, BUFF_SZ, "\tNot supported\n"); - } - hid_debug_event(hdev, buff); - break; - case REPORT_WRITE_MEMORY: - case REPORT_BL_WRITE_MEMORY: - /* 4+1..32 data bytes with write adrea description */ - snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", - "REPORT_WRITE_MEMORY", report->id, raw_size-1); - hid_debug_event(hdev, buff); - switch (data->addr_sz) { - case 2: - snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x\n", - raw_data[2], raw_data[1]); - hid_debug_event(hdev, buff); - snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[3]); - hid_debug_event(hdev, buff); - if (raw_data[3] == 0) { - snprintf(buff, BUFF_SZ, "\tNo data\n"); - } else if (raw_data[3] + 4 <= raw_size) { - snprintf(buff, BUFF_SZ, "\tData: "); - hid_debug_event(hdev, buff); - dump_buff_as_hex(buff, BUFF_SZ, raw_data+4, raw_data[3]); - } else { - snprintf(buff, BUFF_SZ, "\tData overflowed\n"); - } - break; - case 3: - snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x%02x\n", - raw_data[3], raw_data[2], raw_data[1]); - hid_debug_event(hdev, buff); - snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[4]); - hid_debug_event(hdev, buff); - if (raw_data[4] == 0) { - snprintf(buff, BUFF_SZ, "\tNo data\n"); - } else if (raw_data[4] + 5 <= raw_size) { - snprintf(buff, BUFF_SZ, "\tData: "); - hid_debug_event(hdev, buff); - dump_buff_as_hex(buff, BUFF_SZ, raw_data+5, raw_data[4]); - } else { - snprintf(buff, BUFF_SZ, "\tData overflowed\n"); - } - break; - default: - snprintf(buff, BUFF_SZ, "\tNot supported\n"); - } - hid_debug_event(hdev, buff); - break; - case REPORT_SPLASH_RESTART: - /* TODO */ - break; - case REPORT_EXIT_KEYBOARD: - snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", - "REPORT_EXIT_KEYBOARD", report->id, raw_size-1); - hid_debug_event(hdev, buff); - snprintf(buff, BUFF_SZ, "\tRestart delay: %dms (0x%02x%02x)\n", - raw_data[1] | (raw_data[2] << 8), - raw_data[2], raw_data[1]); - hid_debug_event(hdev, buff); - break; - case REPORT_VERSION: - snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", - "REPORT_VERSION", report->id, raw_size-1); - hid_debug_event(hdev, buff); - break; - case REPORT_DEVID: - snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", - "REPORT_DEVID", report->id, raw_size-1); - hid_debug_event(hdev, buff); - break; - case REPORT_SPLASH_SIZE: - snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", - "REPORT_SPLASH_SIZE", report->id, raw_size-1); - hid_debug_event(hdev, buff); - break; - case REPORT_HOOK_VERSION: - snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", - "REPORT_HOOK_VERSION", report->id, raw_size-1); - hid_debug_event(hdev, buff); - break; - case REPORT_EXIT_FLASHER: - snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", - "REPORT_VERSION", report->id, raw_size-1); - hid_debug_event(hdev, buff); - snprintf(buff, BUFF_SZ, "\tRestart delay: %dms (0x%02x%02x)\n", - raw_data[1] | (raw_data[2] << 8), - raw_data[2], raw_data[1]); - hid_debug_event(hdev, buff); - break; - default: - snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", - "<unknown>", report->id, raw_size-1); - hid_debug_event(hdev, buff); - break; - } - wake_up_interruptible(&hdev->debug_wait); - kfree(buff); -} - -static void picolcd_debug_raw_event(struct picolcd_data *data, - struct hid_device *hdev, struct hid_report *report, - u8 *raw_data, int size) -{ - char *buff; - -#define BUFF_SZ 256 - /* Avoid unnecessary overhead if debugfs is disabled */ - if (!hdev->debug_events) - return; - - buff = kmalloc(BUFF_SZ, GFP_ATOMIC); - if (!buff) - return; - - switch (report->id) { - case REPORT_ERROR_CODE: - /* 2 data bytes with affected report and error code */ - snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", - "REPORT_ERROR_CODE", report->id, size-1); - hid_debug_event(hdev, buff); - if (raw_data[2] < ARRAY_SIZE(error_codes)) - snprintf(buff, BUFF_SZ, "\tError code 0x%02x (%s) in reply to report 0x%02x\n", - raw_data[2], error_codes[raw_data[2]], raw_data[1]); - else - snprintf(buff, BUFF_SZ, "\tError code 0x%02x in reply to report 0x%02x\n", - raw_data[2], raw_data[1]); - hid_debug_event(hdev, buff); - break; - case REPORT_KEY_STATE: - /* 2 data bytes with key state */ - snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", - "REPORT_KEY_STATE", report->id, size-1); - hid_debug_event(hdev, buff); - if (raw_data[1] == 0) - snprintf(buff, BUFF_SZ, "\tNo key pressed\n"); - else if (raw_data[2] == 0) - snprintf(buff, BUFF_SZ, "\tOne key pressed: 0x%02x (%d)\n", - raw_data[1], raw_data[1]); - else - snprintf(buff, BUFF_SZ, "\tTwo keys pressed: 0x%02x (%d), 0x%02x (%d)\n", - raw_data[1], raw_data[1], raw_data[2], raw_data[2]); - hid_debug_event(hdev, buff); - break; - case REPORT_IR_DATA: - /* Up to 20 byes of IR scancode data */ - snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", - "REPORT_IR_DATA", report->id, size-1); - hid_debug_event(hdev, buff); - if (raw_data[1] == 0) { - snprintf(buff, BUFF_SZ, "\tUnexpectedly 0 data length\n"); - hid_debug_event(hdev, buff); - } else if (raw_data[1] + 1 <= size) { - snprintf(buff, BUFF_SZ, "\tData length: %d\n\tIR Data: ", - raw_data[1]-1); - hid_debug_event(hdev, buff); - dump_buff_as_hex(buff, BUFF_SZ, raw_data+2, raw_data[1]-1); - hid_debug_event(hdev, buff); - } else { - snprintf(buff, BUFF_SZ, "\tOverflowing data length: %d\n", - raw_data[1]-1); - hid_debug_event(hdev, buff); - } - break; - case REPORT_EE_DATA: - /* Data buffer in response to REPORT_EE_READ or REPORT_EE_WRITE */ - snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", - "REPORT_EE_DATA", report->id, size-1); - hid_debug_event(hdev, buff); - snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x\n", - raw_data[2], raw_data[1]); - hid_debug_event(hdev, buff); - snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[3]); - hid_debug_event(hdev, buff); - if (raw_data[3] == 0) { - snprintf(buff, BUFF_SZ, "\tNo data\n"); - hid_debug_event(hdev, buff); - } else if (raw_data[3] + 4 <= size) { - snprintf(buff, BUFF_SZ, "\tData: "); - hid_debug_event(hdev, buff); - dump_buff_as_hex(buff, BUFF_SZ, raw_data+4, raw_data[3]); - hid_debug_event(hdev, buff); - } else { - snprintf(buff, BUFF_SZ, "\tData overflowed\n"); - hid_debug_event(hdev, buff); - } - break; - case REPORT_MEMORY: - /* Data buffer in response to REPORT_READ_MEMORY or REPORT_WRTIE_MEMORY */ - snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", - "REPORT_MEMORY", report->id, size-1); - hid_debug_event(hdev, buff); - switch (data->addr_sz) { - case 2: - snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x\n", - raw_data[2], raw_data[1]); - hid_debug_event(hdev, buff); - snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[3]); - hid_debug_event(hdev, buff); - if (raw_data[3] == 0) { - snprintf(buff, BUFF_SZ, "\tNo data\n"); - } else if (raw_data[3] + 4 <= size) { - snprintf(buff, BUFF_SZ, "\tData: "); - hid_debug_event(hdev, buff); - dump_buff_as_hex(buff, BUFF_SZ, raw_data+4, raw_data[3]); - } else { - snprintf(buff, BUFF_SZ, "\tData overflowed\n"); - } - break; - case 3: - snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x%02x\n", - raw_data[3], raw_data[2], raw_data[1]); - hid_debug_event(hdev, buff); - snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[4]); - hid_debug_event(hdev, buff); - if (raw_data[4] == 0) { - snprintf(buff, BUFF_SZ, "\tNo data\n"); - } else if (raw_data[4] + 5 <= size) { - snprintf(buff, BUFF_SZ, "\tData: "); - hid_debug_event(hdev, buff); - dump_buff_as_hex(buff, BUFF_SZ, raw_data+5, raw_data[4]); - } else { - snprintf(buff, BUFF_SZ, "\tData overflowed\n"); - } - break; - default: - snprintf(buff, BUFF_SZ, "\tNot supported\n"); - } - hid_debug_event(hdev, buff); - break; - case REPORT_VERSION: - snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", - "REPORT_VERSION", report->id, size-1); - hid_debug_event(hdev, buff); - snprintf(buff, BUFF_SZ, "\tFirmware version: %d.%d\n", - raw_data[2], raw_data[1]); - hid_debug_event(hdev, buff); - break; - case REPORT_BL_ERASE_MEMORY: - snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", - "REPORT_BL_ERASE_MEMORY", report->id, size-1); - hid_debug_event(hdev, buff); - /* TODO */ - break; - case REPORT_BL_READ_MEMORY: - snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", - "REPORT_BL_READ_MEMORY", report->id, size-1); - hid_debug_event(hdev, buff); - /* TODO */ - break; - case REPORT_BL_WRITE_MEMORY: - snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", - "REPORT_BL_WRITE_MEMORY", report->id, size-1); - hid_debug_event(hdev, buff); - /* TODO */ - break; - case REPORT_DEVID: - snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", - "REPORT_DEVID", report->id, size-1); - hid_debug_event(hdev, buff); - snprintf(buff, BUFF_SZ, "\tSerial: 0x%02x%02x%02x%02x\n", - raw_data[1], raw_data[2], raw_data[3], raw_data[4]); - hid_debug_event(hdev, buff); - snprintf(buff, BUFF_SZ, "\tType: 0x%02x\n", - raw_data[5]); - hid_debug_event(hdev, buff); - break; - case REPORT_SPLASH_SIZE: - snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", - "REPORT_SPLASH_SIZE", report->id, size-1); - hid_debug_event(hdev, buff); - snprintf(buff, BUFF_SZ, "\tTotal splash space: %d\n", - (raw_data[2] << 8) | raw_data[1]); - hid_debug_event(hdev, buff); - snprintf(buff, BUFF_SZ, "\tUsed splash space: %d\n", - (raw_data[4] << 8) | raw_data[3]); - hid_debug_event(hdev, buff); - break; - case REPORT_HOOK_VERSION: - snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", - "REPORT_HOOK_VERSION", report->id, size-1); - hid_debug_event(hdev, buff); - snprintf(buff, BUFF_SZ, "\tFirmware version: %d.%d\n", - raw_data[1], raw_data[2]); - hid_debug_event(hdev, buff); - break; - default: - snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", - "<unknown>", report->id, size-1); - hid_debug_event(hdev, buff); - break; - } - wake_up_interruptible(&hdev->debug_wait); - kfree(buff); -} - -static void picolcd_init_devfs(struct picolcd_data *data, - struct hid_report *eeprom_r, struct hid_report *eeprom_w, - struct hid_report *flash_r, struct hid_report *flash_w, - struct hid_report *reset) -{ - struct hid_device *hdev = data->hdev; - - mutex_init(&data->mutex_flash); - - /* reset */ - if (reset) - data->debug_reset = debugfs_create_file("reset", 0600, - hdev->debug_dir, data, &picolcd_debug_reset_fops); - - /* eeprom */ - if (eeprom_r || eeprom_w) - data->debug_eeprom = debugfs_create_file("eeprom", - (eeprom_w ? S_IWUSR : 0) | (eeprom_r ? S_IRUSR : 0), - hdev->debug_dir, data, &picolcd_debug_eeprom_fops); - - /* flash */ - if (flash_r && flash_r->maxfield == 1 && flash_r->field[0]->report_size == 8) - data->addr_sz = flash_r->field[0]->report_count - 1; - else - data->addr_sz = -1; - if (data->addr_sz == 2 || data->addr_sz == 3) { - data->debug_flash = debugfs_create_file("flash", - (flash_w ? S_IWUSR : 0) | (flash_r ? S_IRUSR : 0), - hdev->debug_dir, data, &picolcd_debug_flash_fops); - } else if (flash_r || flash_w) - hid_warn(hdev, "Unexpected FLASH access reports, please submit rdesc for review\n"); -} - -static void picolcd_exit_devfs(struct picolcd_data *data) -{ - struct dentry *dent; - - dent = data->debug_reset; - data->debug_reset = NULL; - if (dent) - debugfs_remove(dent); - dent = data->debug_eeprom; - data->debug_eeprom = NULL; - if (dent) - debugfs_remove(dent); - dent = data->debug_flash; - data->debug_flash = NULL; - if (dent) - debugfs_remove(dent); - mutex_destroy(&data->mutex_flash); -} -#else -static inline void picolcd_debug_raw_event(struct picolcd_data *data, - struct hid_device *hdev, struct hid_report *report, - u8 *raw_data, int size) -{ -} -static inline void picolcd_init_devfs(struct picolcd_data *data, - struct hid_report *eeprom_r, struct hid_report *eeprom_w, - struct hid_report *flash_r, struct hid_report *flash_w, - struct hid_report *reset) -{ -} -static inline void picolcd_exit_devfs(struct picolcd_data *data) -{ -} -#endif /* CONFIG_DEBUG_FS */ - -/* - * Handle raw report as sent by device - */ -static int picolcd_raw_event(struct hid_device *hdev, - struct hid_report *report, u8 *raw_data, int size) -{ - struct picolcd_data *data = hid_get_drvdata(hdev); - unsigned long flags; - int ret = 0; - - if (!data) - return 1; - - if (report->id == REPORT_KEY_STATE) { - if (data->input_keys) - ret = picolcd_raw_keypad(data, report, raw_data+1, size-1); - } else if (report->id == REPORT_IR_DATA) { - if (data->input_cir) - ret = picolcd_raw_cir(data, report, raw_data+1, size-1); - } else { - spin_lock_irqsave(&data->lock, flags); - /* - * We let the caller of picolcd_send_and_wait() check if the - * report we got is one of the expected ones or not. - */ - if (data->pending) { - memcpy(data->pending->raw_data, raw_data+1, size-1); - data->pending->raw_size = size-1; - data->pending->in_report = report; - complete(&data->pending->ready); - } - spin_unlock_irqrestore(&data->lock, flags); - } - - picolcd_debug_raw_event(data, hdev, report, raw_data, size); - return 1; -} - -#ifdef CONFIG_PM -static int picolcd_suspend(struct hid_device *hdev, pm_message_t message) -{ - if (PMSG_IS_AUTO(message)) - return 0; - - picolcd_suspend_backlight(hid_get_drvdata(hdev)); - dbg_hid(PICOLCD_NAME " device ready for suspend\n"); - return 0; -} - -static int picolcd_resume(struct hid_device *hdev) -{ - int ret; - ret = picolcd_resume_backlight(hid_get_drvdata(hdev)); - if (ret) - dbg_hid(PICOLCD_NAME " restoring backlight failed: %d\n", ret); - return 0; -} - -static int picolcd_reset_resume(struct hid_device *hdev) -{ - int ret; - ret = picolcd_reset(hdev); - if (ret) - dbg_hid(PICOLCD_NAME " resetting our device failed: %d\n", ret); - ret = picolcd_fb_reset(hid_get_drvdata(hdev), 0); - if (ret) - dbg_hid(PICOLCD_NAME " restoring framebuffer content failed: %d\n", ret); - ret = picolcd_resume_lcd(hid_get_drvdata(hdev)); - if (ret) - dbg_hid(PICOLCD_NAME " restoring lcd failed: %d\n", ret); - ret = picolcd_resume_backlight(hid_get_drvdata(hdev)); - if (ret) - dbg_hid(PICOLCD_NAME " restoring backlight failed: %d\n", ret); - picolcd_leds_set(hid_get_drvdata(hdev)); - return 0; -} -#endif - -/* initialize keypad input device */ -static int picolcd_init_keys(struct picolcd_data *data, - struct hid_report *report) -{ - struct hid_device *hdev = data->hdev; - struct input_dev *idev; - int error, i; - - if (!report) - return -ENODEV; - if (report->maxfield != 1 || report->field[0]->report_count != 2 || - report->field[0]->report_size != 8) { - hid_err(hdev, "unsupported KEY_STATE report\n"); - return -EINVAL; - } - - idev = input_allocate_device(); - if (idev == NULL) { - hid_err(hdev, "failed to allocate input device\n"); - return -ENOMEM; - } - input_set_drvdata(idev, hdev); - memcpy(data->keycode, def_keymap, sizeof(def_keymap)); - idev->name = hdev->name; - idev->phys = hdev->phys; - idev->uniq = hdev->uniq; - idev->id.bustype = hdev->bus; - idev->id.vendor = hdev->vendor; - idev->id.product = hdev->product; - idev->id.version = hdev->version; - idev->dev.parent = hdev->dev.parent; - idev->keycode = &data->keycode; - idev->keycodemax = PICOLCD_KEYS; - idev->keycodesize = sizeof(data->keycode[0]); - input_set_capability(idev, EV_MSC, MSC_SCAN); - set_bit(EV_REP, idev->evbit); - for (i = 0; i < PICOLCD_KEYS; i++) - input_set_capability(idev, EV_KEY, data->keycode[i]); - error = input_register_device(idev); - if (error) { - hid_err(hdev, "error registering the input device\n"); - input_free_device(idev); - return error; - } - data->input_keys = idev; - return 0; -} - -static void picolcd_exit_keys(struct picolcd_data *data) -{ - struct input_dev *idev = data->input_keys; - - data->input_keys = NULL; - if (idev) - input_unregister_device(idev); -} - -/* initialize CIR input device */ -static inline int picolcd_init_cir(struct picolcd_data *data, struct hid_report *report) -{ - /* support not implemented yet */ - return 0; -} - -static inline void picolcd_exit_cir(struct picolcd_data *data) -{ -} - -static int picolcd_probe_lcd(struct hid_device *hdev, struct picolcd_data *data) -{ - int error; - - error = picolcd_check_version(hdev); - if (error) - return error; - - if (data->version[0] != 0 && data->version[1] != 3) - hid_info(hdev, "Device with untested firmware revision, please submit /sys/kernel/debug/hid/%s/rdesc for this device.\n", - dev_name(&hdev->dev)); - - /* Setup keypad input device */ - error = picolcd_init_keys(data, picolcd_in_report(REPORT_KEY_STATE, hdev)); - if (error) - goto err; - - /* Setup CIR input device */ - error = picolcd_init_cir(data, picolcd_in_report(REPORT_IR_DATA, hdev)); - if (error) - goto err; - - /* Set up the framebuffer device */ - error = picolcd_init_framebuffer(data); - if (error) - goto err; - - /* Setup lcd class device */ - error = picolcd_init_lcd(data, picolcd_out_report(REPORT_CONTRAST, hdev)); - if (error) - goto err; - - /* Setup backlight class device */ - error = picolcd_init_backlight(data, picolcd_out_report(REPORT_BRIGHTNESS, hdev)); - if (error) - goto err; - - /* Setup the LED class devices */ - error = picolcd_init_leds(data, picolcd_out_report(REPORT_LED_STATE, hdev)); - if (error) - goto err; - - picolcd_init_devfs(data, picolcd_out_report(REPORT_EE_READ, hdev), - picolcd_out_report(REPORT_EE_WRITE, hdev), - picolcd_out_report(REPORT_READ_MEMORY, hdev), - picolcd_out_report(REPORT_WRITE_MEMORY, hdev), - picolcd_out_report(REPORT_RESET, hdev)); - return 0; -err: - picolcd_exit_leds(data); - picolcd_exit_backlight(data); - picolcd_exit_lcd(data); - picolcd_exit_framebuffer(data); - picolcd_exit_cir(data); - picolcd_exit_keys(data); - return error; -} - -static int picolcd_probe_bootloader(struct hid_device *hdev, struct picolcd_data *data) -{ - int error; - - error = picolcd_check_version(hdev); - if (error) - return error; - - if (data->version[0] != 1 && data->version[1] != 0) - hid_info(hdev, "Device with untested bootloader revision, please submit /sys/kernel/debug/hid/%s/rdesc for this device.\n", - dev_name(&hdev->dev)); - - picolcd_init_devfs(data, NULL, NULL, - picolcd_out_report(REPORT_BL_READ_MEMORY, hdev), - picolcd_out_report(REPORT_BL_WRITE_MEMORY, hdev), NULL); - return 0; -} - -static int picolcd_probe(struct hid_device *hdev, - const struct hid_device_id *id) -{ - struct picolcd_data *data; - int error = -ENOMEM; - - dbg_hid(PICOLCD_NAME " hardware probe...\n"); - - /* - * Let's allocate the picolcd data structure, set some reasonable - * defaults, and associate it with the device - */ - data = kzalloc(sizeof(struct picolcd_data), GFP_KERNEL); - if (data == NULL) { - hid_err(hdev, "can't allocate space for Minibox PicoLCD device data\n"); - error = -ENOMEM; - goto err_no_cleanup; - } - - spin_lock_init(&data->lock); - mutex_init(&data->mutex); - data->hdev = hdev; - data->opmode_delay = 5000; - if (hdev->product == USB_DEVICE_ID_PICOLCD_BOOTLOADER) - data->status |= PICOLCD_BOOTLOADER; - hid_set_drvdata(hdev, data); - - /* Parse the device reports and start it up */ - error = hid_parse(hdev); - if (error) { - hid_err(hdev, "device report parse failed\n"); - goto err_cleanup_data; - } - - error = hid_hw_start(hdev, 0); - if (error) { - hid_err(hdev, "hardware start failed\n"); - goto err_cleanup_data; - } - - error = hid_hw_open(hdev); - if (error) { - hid_err(hdev, "failed to open input interrupt pipe for key and IR events\n"); - goto err_cleanup_hid_hw; - } - - error = device_create_file(&hdev->dev, &dev_attr_operation_mode_delay); - if (error) { - hid_err(hdev, "failed to create sysfs attributes\n"); - goto err_cleanup_hid_ll; - } - - error = device_create_file(&hdev->dev, &dev_attr_operation_mode); - if (error) { - hid_err(hdev, "failed to create sysfs attributes\n"); - goto err_cleanup_sysfs1; - } - - if (data->status & PICOLCD_BOOTLOADER) - error = picolcd_probe_bootloader(hdev, data); - else - error = picolcd_probe_lcd(hdev, data); - if (error) - goto err_cleanup_sysfs2; - - dbg_hid(PICOLCD_NAME " activated and initialized\n"); - return 0; - -err_cleanup_sysfs2: - device_remove_file(&hdev->dev, &dev_attr_operation_mode); -err_cleanup_sysfs1: - device_remove_file(&hdev->dev, &dev_attr_operation_mode_delay); -err_cleanup_hid_ll: - hid_hw_close(hdev); -err_cleanup_hid_hw: - hid_hw_stop(hdev); -err_cleanup_data: - kfree(data); -err_no_cleanup: - hid_set_drvdata(hdev, NULL); - - return error; -} - -static void picolcd_remove(struct hid_device *hdev) -{ - struct picolcd_data *data = hid_get_drvdata(hdev); - unsigned long flags; - - dbg_hid(PICOLCD_NAME " hardware remove...\n"); - spin_lock_irqsave(&data->lock, flags); - data->status |= PICOLCD_FAILED; - spin_unlock_irqrestore(&data->lock, flags); -#ifdef CONFIG_HID_PICOLCD_FB - /* short-circuit FB as early as possible in order to - * avoid long delays if we host console. - */ - if (data->fb_info) - data->fb_info->par = NULL; -#endif - - picolcd_exit_devfs(data); - device_remove_file(&hdev->dev, &dev_attr_operation_mode); - device_remove_file(&hdev->dev, &dev_attr_operation_mode_delay); - hid_hw_close(hdev); - hid_hw_stop(hdev); - hid_set_drvdata(hdev, NULL); - - /* Shortcut potential pending reply that will never arrive */ - spin_lock_irqsave(&data->lock, flags); - if (data->pending) - complete(&data->pending->ready); - spin_unlock_irqrestore(&data->lock, flags); - - /* Cleanup LED */ - picolcd_exit_leds(data); - /* Clean up the framebuffer */ - picolcd_exit_backlight(data); - picolcd_exit_lcd(data); - picolcd_exit_framebuffer(data); - /* Cleanup input */ - picolcd_exit_cir(data); - picolcd_exit_keys(data); - - mutex_destroy(&data->mutex); - /* Finally, clean up the picolcd data itself */ - kfree(data); -} - -static const struct hid_device_id picolcd_devices[] = { - { HID_USB_DEVICE(USB_VENDOR_ID_MICROCHIP, USB_DEVICE_ID_PICOLCD) }, - { HID_USB_DEVICE(USB_VENDOR_ID_MICROCHIP, USB_DEVICE_ID_PICOLCD_BOOTLOADER) }, - { } -}; -MODULE_DEVICE_TABLE(hid, picolcd_devices); - -static struct hid_driver picolcd_driver = { - .name = "hid-picolcd", - .id_table = picolcd_devices, - .probe = picolcd_probe, - .remove = picolcd_remove, - .raw_event = picolcd_raw_event, -#ifdef CONFIG_PM - .suspend = picolcd_suspend, - .resume = picolcd_resume, - .reset_resume = picolcd_reset_resume, -#endif -}; - -static int __init picolcd_init(void) -{ - return hid_register_driver(&picolcd_driver); -} - -static void __exit picolcd_exit(void) -{ - hid_unregister_driver(&picolcd_driver); -#ifdef CONFIG_HID_PICOLCD_FB - flush_work_sync(&picolcd_fb_cleanup); - WARN_ON(fb_pending); -#endif -} - -module_init(picolcd_init); -module_exit(picolcd_exit); -MODULE_DESCRIPTION("Minibox graphics PicoLCD Driver"); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/hid/hid-picolcd.h b/drivers/hid/hid-picolcd.h new file mode 100644 index 00000000000..020cef69f6a --- /dev/null +++ b/drivers/hid/hid-picolcd.h @@ -0,0 +1,309 @@ +/*************************************************************************** + * Copyright (C) 2010-2012 by Bruno Prémont <bonbons@linux-vserver.org> * + * * + * Based on Logitech G13 driver (v0.4) * + * Copyright (C) 2009 by Rick L. Vinyard, Jr. <rvinyard@cs.nmsu.edu> * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, version 2 of the License. * + * * + * This driver is distributed in the hope that it will be useful, but * + * WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * + * General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this software. If not see <http://www.gnu.org/licenses/>. * + ***************************************************************************/ + +#define PICOLCD_NAME "PicoLCD (graphic)" + +/* Report numbers */ +#define REPORT_ERROR_CODE 0x10 /* LCD: IN[16] */ +#define ERR_SUCCESS 0x00 +#define ERR_PARAMETER_MISSING 0x01 +#define ERR_DATA_MISSING 0x02 +#define ERR_BLOCK_READ_ONLY 0x03 +#define ERR_BLOCK_NOT_ERASABLE 0x04 +#define ERR_BLOCK_TOO_BIG 0x05 +#define ERR_SECTION_OVERFLOW 0x06 +#define ERR_INVALID_CMD_LEN 0x07 +#define ERR_INVALID_DATA_LEN 0x08 +#define REPORT_KEY_STATE 0x11 /* LCD: IN[2] */ +#define REPORT_IR_DATA 0x21 /* LCD: IN[63] */ +#define REPORT_EE_DATA 0x32 /* LCD: IN[63] */ +#define REPORT_MEMORY 0x41 /* LCD: IN[63] */ +#define REPORT_LED_STATE 0x81 /* LCD: OUT[1] */ +#define REPORT_BRIGHTNESS 0x91 /* LCD: OUT[1] */ +#define REPORT_CONTRAST 0x92 /* LCD: OUT[1] */ +#define REPORT_RESET 0x93 /* LCD: OUT[2] */ +#define REPORT_LCD_CMD 0x94 /* LCD: OUT[63] */ +#define REPORT_LCD_DATA 0x95 /* LCD: OUT[63] */ +#define REPORT_LCD_CMD_DATA 0x96 /* LCD: OUT[63] */ +#define REPORT_EE_READ 0xa3 /* LCD: OUT[63] */ +#define REPORT_EE_WRITE 0xa4 /* LCD: OUT[63] */ +#define REPORT_ERASE_MEMORY 0xb2 /* LCD: OUT[2] */ +#define REPORT_READ_MEMORY 0xb3 /* LCD: OUT[3] */ +#define REPORT_WRITE_MEMORY 0xb4 /* LCD: OUT[63] */ +#define REPORT_SPLASH_RESTART 0xc1 /* LCD: OUT[1] */ +#define REPORT_EXIT_KEYBOARD 0xef /* LCD: OUT[2] */ +#define REPORT_VERSION 0xf1 /* LCD: IN[2],OUT[1] Bootloader: IN[2],OUT[1] */ +#define REPORT_BL_ERASE_MEMORY 0xf2 /* Bootloader: IN[36],OUT[4] */ +#define REPORT_BL_READ_MEMORY 0xf3 /* Bootloader: IN[36],OUT[4] */ +#define REPORT_BL_WRITE_MEMORY 0xf4 /* Bootloader: IN[36],OUT[36] */ +#define REPORT_DEVID 0xf5 /* LCD: IN[5], OUT[1] Bootloader: IN[5],OUT[1] */ +#define REPORT_SPLASH_SIZE 0xf6 /* LCD: IN[4], OUT[1] */ +#define REPORT_HOOK_VERSION 0xf7 /* LCD: IN[2], OUT[1] */ +#define REPORT_EXIT_FLASHER 0xff /* Bootloader: OUT[2] */ + +/* Description of in-progress IO operation, used for operations + * that trigger response from device */ +struct picolcd_pending { + struct hid_report *out_report; + struct hid_report *in_report; + struct completion ready; + int raw_size; + u8 raw_data[64]; +}; + + +#define PICOLCD_KEYS 17 + +/* Per device data structure */ +struct picolcd_data { + struct hid_device *hdev; +#ifdef CONFIG_DEBUG_FS + struct dentry *debug_reset; + struct dentry *debug_eeprom; + struct dentry *debug_flash; + struct mutex mutex_flash; + int addr_sz; +#endif + u8 version[2]; + unsigned short opmode_delay; + /* input stuff */ + u8 pressed_keys[2]; + struct input_dev *input_keys; +#ifdef CONFIG_HID_PICOLCD_CIR + struct rc_dev *rc_dev; +#endif + unsigned short keycode[PICOLCD_KEYS]; + +#ifdef CONFIG_HID_PICOLCD_FB + /* Framebuffer stuff */ + struct fb_info *fb_info; +#endif /* CONFIG_HID_PICOLCD_FB */ +#ifdef CONFIG_HID_PICOLCD_LCD + struct lcd_device *lcd; + u8 lcd_contrast; +#endif /* CONFIG_HID_PICOLCD_LCD */ +#ifdef CONFIG_HID_PICOLCD_BACKLIGHT + struct backlight_device *backlight; + u8 lcd_brightness; + u8 lcd_power; +#endif /* CONFIG_HID_PICOLCD_BACKLIGHT */ +#ifdef CONFIG_HID_PICOLCD_LEDS + /* LED stuff */ + u8 led_state; + struct led_classdev *led[8]; +#endif /* CONFIG_HID_PICOLCD_LEDS */ + + /* Housekeeping stuff */ + spinlock_t lock; + struct mutex mutex; + struct picolcd_pending *pending; + int status; +#define PICOLCD_BOOTLOADER 1 +#define PICOLCD_FAILED 2 +#define PICOLCD_CIR_SHUN 4 +}; + +#ifdef CONFIG_HID_PICOLCD_FB +struct picolcd_fb_data { + /* Framebuffer stuff */ + spinlock_t lock; + struct picolcd_data *picolcd; + u8 update_rate; + u8 bpp; + u8 force; + u8 ready; + u8 *vbitmap; /* local copy of what was sent to PicoLCD */ + u8 *bitmap; /* framebuffer */ +}; +#endif /* CONFIG_HID_PICOLCD_FB */ + +/* Find a given report */ +#define picolcd_in_report(id, dev) picolcd_report(id, dev, HID_INPUT_REPORT) +#define picolcd_out_report(id, dev) picolcd_report(id, dev, HID_OUTPUT_REPORT) + +struct hid_report *picolcd_report(int id, struct hid_device *hdev, int dir); + +#ifdef CONFIG_DEBUG_FS +void picolcd_debug_out_report(struct picolcd_data *data, + struct hid_device *hdev, struct hid_report *report); +#define usbhid_submit_report(a, b, c) \ + do { \ + picolcd_debug_out_report(hid_get_drvdata(a), a, b); \ + usbhid_submit_report(a, b, c); \ + } while (0) + +void picolcd_debug_raw_event(struct picolcd_data *data, + struct hid_device *hdev, struct hid_report *report, + u8 *raw_data, int size); + +void picolcd_init_devfs(struct picolcd_data *data, + struct hid_report *eeprom_r, struct hid_report *eeprom_w, + struct hid_report *flash_r, struct hid_report *flash_w, + struct hid_report *reset); + +void picolcd_exit_devfs(struct picolcd_data *data); +#else +static inline void picolcd_debug_out_report(struct picolcd_data *data, + struct hid_device *hdev, struct hid_report *report) +{ +} +static inline void picolcd_debug_raw_event(struct picolcd_data *data, + struct hid_device *hdev, struct hid_report *report, + u8 *raw_data, int size) +{ +} +static inline void picolcd_init_devfs(struct picolcd_data *data, + struct hid_report *eeprom_r, struct hid_report *eeprom_w, + struct hid_report *flash_r, struct hid_report *flash_w, + struct hid_report *reset) +{ +} +static inline void picolcd_exit_devfs(struct picolcd_data *data) +{ +} +#endif /* CONFIG_DEBUG_FS */ + + +#ifdef CONFIG_HID_PICOLCD_FB +int picolcd_fb_reset(struct picolcd_data *data, int clear); + +int picolcd_init_framebuffer(struct picolcd_data *data); + +void picolcd_exit_framebuffer(struct picolcd_data *data); + +void picolcd_fb_refresh(struct picolcd_data *data); +#define picolcd_fbinfo(d) ((d)->fb_info) +#else +static inline int picolcd_fb_reset(struct picolcd_data *data, int clear) +{ + return 0; +} +static inline int picolcd_init_framebuffer(struct picolcd_data *data) +{ + return 0; +} +static inline void picolcd_exit_framebuffer(struct picolcd_data *data) +{ +} +static inline void picolcd_fb_refresh(struct picolcd_data *data) +{ +} +#define picolcd_fbinfo(d) NULL +#endif /* CONFIG_HID_PICOLCD_FB */ + + +#ifdef CONFIG_HID_PICOLCD_BACKLIGHT +int picolcd_init_backlight(struct picolcd_data *data, + struct hid_report *report); + +void picolcd_exit_backlight(struct picolcd_data *data); + +int picolcd_resume_backlight(struct picolcd_data *data); + +void picolcd_suspend_backlight(struct picolcd_data *data); +#else +static inline int picolcd_init_backlight(struct picolcd_data *data, + struct hid_report *report) +{ + return 0; +} +static inline void picolcd_exit_backlight(struct picolcd_data *data) +{ +} +static inline int picolcd_resume_backlight(struct picolcd_data *data) +{ + return 0; +} +static inline void picolcd_suspend_backlight(struct picolcd_data *data) +{ +} + +#endif /* CONFIG_HID_PICOLCD_BACKLIGHT */ + + +#ifdef CONFIG_HID_PICOLCD_LCD +int picolcd_init_lcd(struct picolcd_data *data, + struct hid_report *report); + +void picolcd_exit_lcd(struct picolcd_data *data); + +int picolcd_resume_lcd(struct picolcd_data *data); +#else +static inline int picolcd_init_lcd(struct picolcd_data *data, + struct hid_report *report) +{ + return 0; +} +static inline void picolcd_exit_lcd(struct picolcd_data *data) +{ +} +static inline int picolcd_resume_lcd(struct picolcd_data *data) +{ + return 0; +} +#endif /* CONFIG_HID_PICOLCD_LCD */ + + +#ifdef CONFIG_HID_PICOLCD_LEDS +int picolcd_init_leds(struct picolcd_data *data, + struct hid_report *report); + +void picolcd_exit_leds(struct picolcd_data *data); + +void picolcd_leds_set(struct picolcd_data *data); +#else +static inline int picolcd_init_leds(struct picolcd_data *data, + struct hid_report *report) +{ + return 0; +} +static inline void picolcd_exit_leds(struct picolcd_data *data) +{ +} +static inline void picolcd_leds_set(struct picolcd_data *data) +{ +} +#endif /* CONFIG_HID_PICOLCD_LEDS */ + + +#ifdef CONFIG_HID_PICOLCD_CIR +int picolcd_raw_cir(struct picolcd_data *data, + struct hid_report *report, u8 *raw_data, int size); + +int picolcd_init_cir(struct picolcd_data *data, struct hid_report *report); + +void picolcd_exit_cir(struct picolcd_data *data); +#else +static inline int picolcd_raw_cir(struct picolcd_data *data, + struct hid_report *report, u8 *raw_data, int size) +{ + return 1; +} +static inline int picolcd_init_cir(struct picolcd_data *data, struct hid_report *report) +{ + return 0; +} +static inline void picolcd_exit_cir(struct picolcd_data *data) +{ +} +#endif /* CONFIG_HID_PICOLCD_LIRC */ + +int picolcd_reset(struct hid_device *hdev); +struct picolcd_pending *picolcd_send_and_wait(struct hid_device *hdev, + int report_id, const u8 *raw_data, int size); diff --git a/drivers/hid/hid-picolcd_backlight.c b/drivers/hid/hid-picolcd_backlight.c new file mode 100644 index 00000000000..b91f30945f9 --- /dev/null +++ b/drivers/hid/hid-picolcd_backlight.c @@ -0,0 +1,122 @@ +/*************************************************************************** + * Copyright (C) 2010-2012 by Bruno Prémont <bonbons@linux-vserver.org> * + * * + * Based on Logitech G13 driver (v0.4) * + * Copyright (C) 2009 by Rick L. Vinyard, Jr. <rvinyard@cs.nmsu.edu> * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, version 2 of the License. * + * * + * This driver is distributed in the hope that it will be useful, but * + * WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * + * General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this software. If not see <http://www.gnu.org/licenses/>. * + ***************************************************************************/ + +#include <linux/hid.h> +#include "usbhid/usbhid.h" +#include <linux/usb.h> + +#include <linux/fb.h> +#include <linux/backlight.h> + +#include "hid-picolcd.h" + +static int picolcd_get_brightness(struct backlight_device *bdev) +{ + struct picolcd_data *data = bl_get_data(bdev); + return data->lcd_brightness; +} + +static int picolcd_set_brightness(struct backlight_device *bdev) +{ + struct picolcd_data *data = bl_get_data(bdev); + struct hid_report *report = picolcd_out_report(REPORT_BRIGHTNESS, data->hdev); + unsigned long flags; + + if (!report || report->maxfield != 1 || report->field[0]->report_count != 1) + return -ENODEV; + + data->lcd_brightness = bdev->props.brightness & 0x0ff; + data->lcd_power = bdev->props.power; + spin_lock_irqsave(&data->lock, flags); + hid_set_field(report->field[0], 0, data->lcd_power == FB_BLANK_UNBLANK ? data->lcd_brightness : 0); + if (!(data->status & PICOLCD_FAILED)) + usbhid_submit_report(data->hdev, report, USB_DIR_OUT); + spin_unlock_irqrestore(&data->lock, flags); + return 0; +} + +static int picolcd_check_bl_fb(struct backlight_device *bdev, struct fb_info *fb) +{ + return fb && fb == picolcd_fbinfo((struct picolcd_data *)bl_get_data(bdev)); +} + +static const struct backlight_ops picolcd_blops = { + .update_status = picolcd_set_brightness, + .get_brightness = picolcd_get_brightness, + .check_fb = picolcd_check_bl_fb, +}; + +int picolcd_init_backlight(struct picolcd_data *data, struct hid_report *report) +{ + struct device *dev = &data->hdev->dev; + struct backlight_device *bdev; + struct backlight_properties props; + if (!report) + return -ENODEV; + if (report->maxfield != 1 || report->field[0]->report_count != 1 || + report->field[0]->report_size != 8) { + dev_err(dev, "unsupported BRIGHTNESS report"); + return -EINVAL; + } + + memset(&props, 0, sizeof(props)); + props.type = BACKLIGHT_RAW; + props.max_brightness = 0xff; + bdev = backlight_device_register(dev_name(dev), dev, data, + &picolcd_blops, &props); + if (IS_ERR(bdev)) { + dev_err(dev, "failed to register backlight\n"); + return PTR_ERR(bdev); + } + bdev->props.brightness = 0xff; + data->lcd_brightness = 0xff; + data->backlight = bdev; + picolcd_set_brightness(bdev); + return 0; +} + +void picolcd_exit_backlight(struct picolcd_data *data) +{ + struct backlight_device *bdev = data->backlight; + + data->backlight = NULL; + if (bdev) + backlight_device_unregister(bdev); +} + +int picolcd_resume_backlight(struct picolcd_data *data) +{ + if (!data->backlight) + return 0; + return picolcd_set_brightness(data->backlight); +} + +#ifdef CONFIG_PM +void picolcd_suspend_backlight(struct picolcd_data *data) +{ + int bl_power = data->lcd_power; + if (!data->backlight) + return; + + data->backlight->props.power = FB_BLANK_POWERDOWN; + picolcd_set_brightness(data->backlight); + data->lcd_power = data->backlight->props.power = bl_power; +} +#endif /* CONFIG_PM */ + diff --git a/drivers/hid/hid-picolcd_cir.c b/drivers/hid/hid-picolcd_cir.c new file mode 100644 index 00000000000..13ca9191b63 --- /dev/null +++ b/drivers/hid/hid-picolcd_cir.c @@ -0,0 +1,152 @@ +/*************************************************************************** + * Copyright (C) 2010-2012 by Bruno Prémont <bonbons@linux-vserver.org> * + * * + * Based on Logitech G13 driver (v0.4) * + * Copyright (C) 2009 by Rick L. Vinyard, Jr. <rvinyard@cs.nmsu.edu> * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, version 2 of the License. * + * * + * This driver is distributed in the hope that it will be useful, but * + * WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * + * General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this software. If not see <http://www.gnu.org/licenses/>. * + ***************************************************************************/ + +#include <linux/hid.h> +#include <linux/hid-debug.h> +#include <linux/input.h> +#include "hid-ids.h" +#include "usbhid/usbhid.h" +#include <linux/usb.h> + +#include <linux/fb.h> +#include <linux/vmalloc.h> +#include <linux/backlight.h> +#include <linux/lcd.h> + +#include <linux/leds.h> + +#include <linux/seq_file.h> +#include <linux/debugfs.h> + +#include <linux/completion.h> +#include <linux/uaccess.h> +#include <linux/module.h> +#include <media/rc-core.h> + +#include "hid-picolcd.h" + + +int picolcd_raw_cir(struct picolcd_data *data, + struct hid_report *report, u8 *raw_data, int size) +{ + unsigned long flags; + int i, w, sz; + DEFINE_IR_RAW_EVENT(rawir); + + /* ignore if rc_dev is NULL or status is shunned */ + spin_lock_irqsave(&data->lock, flags); + if (!data->rc_dev || (data->status & PICOLCD_CIR_SHUN)) { + spin_unlock_irqrestore(&data->lock, flags); + return 1; + } + spin_unlock_irqrestore(&data->lock, flags); + + /* PicoLCD USB packets contain 16-bit intervals in network order, + * with value negated for pulse. Intervals are in microseconds. + * + * Note: some userspace LIRC code for PicoLCD says negated values + * for space - is it a matter of IR chip? (pulse for my TSOP2236) + * + * In addition, the first interval seems to be around 15000 + base + * interval for non-first report of IR data - thus the quirk below + * to get RC_CODE to understand Sony and JVC remotes I have at hand + */ + sz = size > 0 ? min((int)raw_data[0], size-1) : 0; + for (i = 0; i+1 < sz; i += 2) { + init_ir_raw_event(&rawir); + w = (raw_data[i] << 8) | (raw_data[i+1]); + rawir.pulse = !!(w & 0x8000); + rawir.duration = US_TO_NS(rawir.pulse ? (65536 - w) : w); + /* Quirk!! - see above */ + if (i == 0 && rawir.duration > 15000000) + rawir.duration -= 15000000; + ir_raw_event_store(data->rc_dev, &rawir); + } + ir_raw_event_handle(data->rc_dev); + + return 1; +} + +static int picolcd_cir_open(struct rc_dev *dev) +{ + struct picolcd_data *data = dev->priv; + unsigned long flags; + + spin_lock_irqsave(&data->lock, flags); + data->status &= ~PICOLCD_CIR_SHUN; + spin_unlock_irqrestore(&data->lock, flags); + return 0; +} + +static void picolcd_cir_close(struct rc_dev *dev) +{ + struct picolcd_data *data = dev->priv; + unsigned long flags; + + spin_lock_irqsave(&data->lock, flags); + data->status |= PICOLCD_CIR_SHUN; + spin_unlock_irqrestore(&data->lock, flags); +} + +/* initialize CIR input device */ +int picolcd_init_cir(struct picolcd_data *data, struct hid_report *report) +{ + struct rc_dev *rdev; + int ret = 0; + + rdev = rc_allocate_device(); + if (!rdev) + return -ENOMEM; + + rdev->priv = data; + rdev->driver_type = RC_DRIVER_IR_RAW; + rdev->allowed_protos = RC_TYPE_ALL; + rdev->open = picolcd_cir_open; + rdev->close = picolcd_cir_close; + rdev->input_name = data->hdev->name; + rdev->input_phys = data->hdev->phys; + rdev->input_id.bustype = data->hdev->bus; + rdev->input_id.vendor = data->hdev->vendor; + rdev->input_id.product = data->hdev->product; + rdev->input_id.version = data->hdev->version; + rdev->dev.parent = &data->hdev->dev; + rdev->driver_name = PICOLCD_NAME; + rdev->map_name = RC_MAP_RC6_MCE; + rdev->timeout = MS_TO_NS(100); + rdev->rx_resolution = US_TO_NS(1); + + ret = rc_register_device(rdev); + if (ret) + goto err; + data->rc_dev = rdev; + return 0; + +err: + rc_free_device(rdev); + return ret; +} + +void picolcd_exit_cir(struct picolcd_data *data) +{ + struct rc_dev *rdev = data->rc_dev; + + data->rc_dev = NULL; + rc_unregister_device(rdev); +} + diff --git a/drivers/hid/hid-picolcd_core.c b/drivers/hid/hid-picolcd_core.c new file mode 100644 index 00000000000..86df26e58ab --- /dev/null +++ b/drivers/hid/hid-picolcd_core.c @@ -0,0 +1,689 @@ +/*************************************************************************** + * Copyright (C) 2010-2012 by Bruno Prémont <bonbons@linux-vserver.org> * + * * + * Based on Logitech G13 driver (v0.4) * + * Copyright (C) 2009 by Rick L. Vinyard, Jr. <rvinyard@cs.nmsu.edu> * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, version 2 of the License. * + * * + * This driver is distributed in the hope that it will be useful, but * + * WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * + * General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this software. If not see <http://www.gnu.org/licenses/>. * + ***************************************************************************/ + +#include <linux/hid.h> +#include <linux/hid-debug.h> +#include <linux/input.h> +#include "hid-ids.h" +#include "usbhid/usbhid.h" +#include <linux/usb.h> + +#include <linux/fb.h> +#include <linux/vmalloc.h> + +#include <linux/completion.h> +#include <linux/uaccess.h> +#include <linux/module.h> + +#include "hid-picolcd.h" + + +/* Input device + * + * The PicoLCD has an IR receiver header, a built-in keypad with 5 keys + * and header for 4x4 key matrix. The built-in keys are part of the matrix. + */ +static const unsigned short def_keymap[PICOLCD_KEYS] = { + KEY_RESERVED, /* none */ + KEY_BACK, /* col 4 + row 1 */ + KEY_HOMEPAGE, /* col 3 + row 1 */ + KEY_RESERVED, /* col 2 + row 1 */ + KEY_RESERVED, /* col 1 + row 1 */ + KEY_SCROLLUP, /* col 4 + row 2 */ + KEY_OK, /* col 3 + row 2 */ + KEY_SCROLLDOWN, /* col 2 + row 2 */ + KEY_RESERVED, /* col 1 + row 2 */ + KEY_RESERVED, /* col 4 + row 3 */ + KEY_RESERVED, /* col 3 + row 3 */ + KEY_RESERVED, /* col 2 + row 3 */ + KEY_RESERVED, /* col 1 + row 3 */ + KEY_RESERVED, /* col 4 + row 4 */ + KEY_RESERVED, /* col 3 + row 4 */ + KEY_RESERVED, /* col 2 + row 4 */ + KEY_RESERVED, /* col 1 + row 4 */ +}; + + +/* Find a given report */ +struct hid_report *picolcd_report(int id, struct hid_device *hdev, int dir) +{ + struct list_head *feature_report_list = &hdev->report_enum[dir].report_list; + struct hid_report *report = NULL; + + list_for_each_entry(report, feature_report_list, list) { + if (report->id == id) + return report; + } + hid_warn(hdev, "No report with id 0x%x found\n", id); + return NULL; +} + +/* Submit a report and wait for a reply from device - if device fades away + * or does not respond in time, return NULL */ +struct picolcd_pending *picolcd_send_and_wait(struct hid_device *hdev, + int report_id, const u8 *raw_data, int size) +{ + struct picolcd_data *data = hid_get_drvdata(hdev); + struct picolcd_pending *work; + struct hid_report *report = picolcd_out_report(report_id, hdev); + unsigned long flags; + int i, j, k; + + if (!report || !data) + return NULL; + if (data->status & PICOLCD_FAILED) + return NULL; + work = kzalloc(sizeof(*work), GFP_KERNEL); + if (!work) + return NULL; + + init_completion(&work->ready); + work->out_report = report; + work->in_report = NULL; + work->raw_size = 0; + + mutex_lock(&data->mutex); + spin_lock_irqsave(&data->lock, flags); + for (i = k = 0; i < report->maxfield; i++) + for (j = 0; j < report->field[i]->report_count; j++) { + hid_set_field(report->field[i], j, k < size ? raw_data[k] : 0); + k++; + } + if (data->status & PICOLCD_FAILED) { + kfree(work); + work = NULL; + } else { + data->pending = work; + usbhid_submit_report(data->hdev, report, USB_DIR_OUT); + spin_unlock_irqrestore(&data->lock, flags); + wait_for_completion_interruptible_timeout(&work->ready, HZ*2); + spin_lock_irqsave(&data->lock, flags); + data->pending = NULL; + } + spin_unlock_irqrestore(&data->lock, flags); + mutex_unlock(&data->mutex); + return work; +} + +/* + * input class device + */ +static int picolcd_raw_keypad(struct picolcd_data *data, + struct hid_report *report, u8 *raw_data, int size) +{ + /* + * Keypad event + * First and second data bytes list currently pressed keys, + * 0x00 means no key and at most 2 keys may be pressed at same time + */ + int i, j; + + /* determine newly pressed keys */ + for (i = 0; i < size; i++) { + unsigned int key_code; + if (raw_data[i] == 0) + continue; + for (j = 0; j < sizeof(data->pressed_keys); j++) + if (data->pressed_keys[j] == raw_data[i]) + goto key_already_down; + for (j = 0; j < sizeof(data->pressed_keys); j++) + if (data->pressed_keys[j] == 0) { + data->pressed_keys[j] = raw_data[i]; + break; + } + input_event(data->input_keys, EV_MSC, MSC_SCAN, raw_data[i]); + if (raw_data[i] < PICOLCD_KEYS) + key_code = data->keycode[raw_data[i]]; + else + key_code = KEY_UNKNOWN; + if (key_code != KEY_UNKNOWN) { + dbg_hid(PICOLCD_NAME " got key press for %u:%d", + raw_data[i], key_code); + input_report_key(data->input_keys, key_code, 1); + } + input_sync(data->input_keys); +key_already_down: + continue; + } + + /* determine newly released keys */ + for (j = 0; j < sizeof(data->pressed_keys); j++) { + unsigned int key_code; + if (data->pressed_keys[j] == 0) + continue; + for (i = 0; i < size; i++) + if (data->pressed_keys[j] == raw_data[i]) + goto key_still_down; + input_event(data->input_keys, EV_MSC, MSC_SCAN, data->pressed_keys[j]); + if (data->pressed_keys[j] < PICOLCD_KEYS) + key_code = data->keycode[data->pressed_keys[j]]; + else + key_code = KEY_UNKNOWN; + if (key_code != KEY_UNKNOWN) { + dbg_hid(PICOLCD_NAME " got key release for %u:%d", + data->pressed_keys[j], key_code); + input_report_key(data->input_keys, key_code, 0); + } + input_sync(data->input_keys); + data->pressed_keys[j] = 0; +key_still_down: + continue; + } + return 1; +} + +static int picolcd_check_version(struct hid_device *hdev) +{ + struct picolcd_data *data = hid_get_drvdata(hdev); + struct picolcd_pending *verinfo; + int ret = 0; + + if (!data) + return -ENODEV; + + verinfo = picolcd_send_and_wait(hdev, REPORT_VERSION, NULL, 0); + if (!verinfo) { + hid_err(hdev, "no version response from PicoLCD\n"); + return -ENODEV; + } + + if (verinfo->raw_size == 2) { + data->version[0] = verinfo->raw_data[1]; + data->version[1] = verinfo->raw_data[0]; + if (data->status & PICOLCD_BOOTLOADER) { + hid_info(hdev, "PicoLCD, bootloader version %d.%d\n", + verinfo->raw_data[1], verinfo->raw_data[0]); + } else { + hid_info(hdev, "PicoLCD, firmware version %d.%d\n", + verinfo->raw_data[1], verinfo->raw_data[0]); + } + } else { + hid_err(hdev, "confused, got unexpected version response from PicoLCD\n"); + ret = -EINVAL; + } + kfree(verinfo); + return ret; +} + +/* + * Reset our device and wait for answer to VERSION request + */ +int picolcd_reset(struct hid_device *hdev) +{ + struct picolcd_data *data = hid_get_drvdata(hdev); + struct hid_report *report = picolcd_out_report(REPORT_RESET, hdev); + unsigned long flags; + int error; + + if (!data || !report || report->maxfield != 1) + return -ENODEV; + + spin_lock_irqsave(&data->lock, flags); + if (hdev->product == USB_DEVICE_ID_PICOLCD_BOOTLOADER) + data->status |= PICOLCD_BOOTLOADER; + + /* perform the reset */ + hid_set_field(report->field[0], 0, 1); + if (data->status & PICOLCD_FAILED) { + spin_unlock_irqrestore(&data->lock, flags); + return -ENODEV; + } + usbhid_submit_report(hdev, report, USB_DIR_OUT); + spin_unlock_irqrestore(&data->lock, flags); + + error = picolcd_check_version(hdev); + if (error) + return error; + + picolcd_resume_lcd(data); + picolcd_resume_backlight(data); + picolcd_fb_refresh(data); + picolcd_leds_set(data); + return 0; +} + +/* + * The "operation_mode" sysfs attribute + */ +static ssize_t picolcd_operation_mode_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct picolcd_data *data = dev_get_drvdata(dev); + + if (data->status & PICOLCD_BOOTLOADER) + return snprintf(buf, PAGE_SIZE, "[bootloader] lcd\n"); + else + return snprintf(buf, PAGE_SIZE, "bootloader [lcd]\n"); +} + +static ssize_t picolcd_operation_mode_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct picolcd_data *data = dev_get_drvdata(dev); + struct hid_report *report = NULL; + size_t cnt = count; + int timeout = data->opmode_delay; + unsigned long flags; + + if (cnt >= 3 && strncmp("lcd", buf, 3) == 0) { + if (data->status & PICOLCD_BOOTLOADER) + report = picolcd_out_report(REPORT_EXIT_FLASHER, data->hdev); + buf += 3; + cnt -= 3; + } else if (cnt >= 10 && strncmp("bootloader", buf, 10) == 0) { + if (!(data->status & PICOLCD_BOOTLOADER)) + report = picolcd_out_report(REPORT_EXIT_KEYBOARD, data->hdev); + buf += 10; + cnt -= 10; + } + if (!report) + return -EINVAL; + + while (cnt > 0 && (buf[cnt-1] == '\n' || buf[cnt-1] == '\r')) + cnt--; + if (cnt != 0) + return -EINVAL; + + spin_lock_irqsave(&data->lock, flags); + hid_set_field(report->field[0], 0, timeout & 0xff); + hid_set_field(report->field[0], 1, (timeout >> 8) & 0xff); + usbhid_submit_report(data->hdev, report, USB_DIR_OUT); + spin_unlock_irqrestore(&data->lock, flags); + return count; +} + +static DEVICE_ATTR(operation_mode, 0644, picolcd_operation_mode_show, + picolcd_operation_mode_store); + +/* + * The "operation_mode_delay" sysfs attribute + */ +static ssize_t picolcd_operation_mode_delay_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct picolcd_data *data = dev_get_drvdata(dev); + + return snprintf(buf, PAGE_SIZE, "%hu\n", data->opmode_delay); +} + +static ssize_t picolcd_operation_mode_delay_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct picolcd_data *data = dev_get_drvdata(dev); + unsigned u; + if (sscanf(buf, "%u", &u) != 1) + return -EINVAL; + if (u > 30000) + return -EINVAL; + else + data->opmode_delay = u; + return count; +} + +static DEVICE_ATTR(operation_mode_delay, 0644, picolcd_operation_mode_delay_show, + picolcd_operation_mode_delay_store); + +/* + * Handle raw report as sent by device + */ +static int picolcd_raw_event(struct hid_device *hdev, + struct hid_report *report, u8 *raw_data, int size) +{ + struct picolcd_data *data = hid_get_drvdata(hdev); + unsigned long flags; + int ret = 0; + + if (!data) + return 1; + + if (report->id == REPORT_KEY_STATE) { + if (data->input_keys) + ret = picolcd_raw_keypad(data, report, raw_data+1, size-1); + } else if (report->id == REPORT_IR_DATA) { + ret = picolcd_raw_cir(data, report, raw_data+1, size-1); + } else { + spin_lock_irqsave(&data->lock, flags); + /* + * We let the caller of picolcd_send_and_wait() check if the + * report we got is one of the expected ones or not. + */ + if (data->pending) { + memcpy(data->pending->raw_data, raw_data+1, size-1); + data->pending->raw_size = size-1; + data->pending->in_report = report; + complete(&data->pending->ready); + } + spin_unlock_irqrestore(&data->lock, flags); + } + + picolcd_debug_raw_event(data, hdev, report, raw_data, size); + return 1; +} + +#ifdef CONFIG_PM +static int picolcd_suspend(struct hid_device *hdev, pm_message_t message) +{ + if (PMSG_IS_AUTO(message)) + return 0; + + picolcd_suspend_backlight(hid_get_drvdata(hdev)); + dbg_hid(PICOLCD_NAME " device ready for suspend\n"); + return 0; +} + +static int picolcd_resume(struct hid_device *hdev) +{ + int ret; + ret = picolcd_resume_backlight(hid_get_drvdata(hdev)); + if (ret) + dbg_hid(PICOLCD_NAME " restoring backlight failed: %d\n", ret); + return 0; +} + +static int picolcd_reset_resume(struct hid_device *hdev) +{ + int ret; + ret = picolcd_reset(hdev); + if (ret) + dbg_hid(PICOLCD_NAME " resetting our device failed: %d\n", ret); + ret = picolcd_fb_reset(hid_get_drvdata(hdev), 0); + if (ret) + dbg_hid(PICOLCD_NAME " restoring framebuffer content failed: %d\n", ret); + ret = picolcd_resume_lcd(hid_get_drvdata(hdev)); + if (ret) + dbg_hid(PICOLCD_NAME " restoring lcd failed: %d\n", ret); + ret = picolcd_resume_backlight(hid_get_drvdata(hdev)); + if (ret) + dbg_hid(PICOLCD_NAME " restoring backlight failed: %d\n", ret); + picolcd_leds_set(hid_get_drvdata(hdev)); + return 0; +} +#endif + +/* initialize keypad input device */ +static int picolcd_init_keys(struct picolcd_data *data, + struct hid_report *report) +{ + struct hid_device *hdev = data->hdev; + struct input_dev *idev; + int error, i; + + if (!report) + return -ENODEV; + if (report->maxfield != 1 || report->field[0]->report_count != 2 || + report->field[0]->report_size != 8) { + hid_err(hdev, "unsupported KEY_STATE report\n"); + return -EINVAL; + } + + idev = input_allocate_device(); + if (idev == NULL) { + hid_err(hdev, "failed to allocate input device\n"); + return -ENOMEM; + } + input_set_drvdata(idev, hdev); + memcpy(data->keycode, def_keymap, sizeof(def_keymap)); + idev->name = hdev->name; + idev->phys = hdev->phys; + idev->uniq = hdev->uniq; + idev->id.bustype = hdev->bus; + idev->id.vendor = hdev->vendor; + idev->id.product = hdev->product; + idev->id.version = hdev->version; + idev->dev.parent = &hdev->dev; + idev->keycode = &data->keycode; + idev->keycodemax = PICOLCD_KEYS; + idev->keycodesize = sizeof(data->keycode[0]); + input_set_capability(idev, EV_MSC, MSC_SCAN); + set_bit(EV_REP, idev->evbit); + for (i = 0; i < PICOLCD_KEYS; i++) + input_set_capability(idev, EV_KEY, data->keycode[i]); + error = input_register_device(idev); + if (error) { + hid_err(hdev, "error registering the input device\n"); + input_free_device(idev); + return error; + } + data->input_keys = idev; + return 0; +} + +static void picolcd_exit_keys(struct picolcd_data *data) +{ + struct input_dev *idev = data->input_keys; + + data->input_keys = NULL; + if (idev) + input_unregister_device(idev); +} + +static int picolcd_probe_lcd(struct hid_device *hdev, struct picolcd_data *data) +{ + int error; + + /* Setup keypad input device */ + error = picolcd_init_keys(data, picolcd_in_report(REPORT_KEY_STATE, hdev)); + if (error) + goto err; + + /* Setup CIR input device */ + error = picolcd_init_cir(data, picolcd_in_report(REPORT_IR_DATA, hdev)); + if (error) + goto err; + + /* Set up the framebuffer device */ + error = picolcd_init_framebuffer(data); + if (error) + goto err; + + /* Setup lcd class device */ + error = picolcd_init_lcd(data, picolcd_out_report(REPORT_CONTRAST, hdev)); + if (error) + goto err; + + /* Setup backlight class device */ + error = picolcd_init_backlight(data, picolcd_out_report(REPORT_BRIGHTNESS, hdev)); + if (error) + goto err; + + /* Setup the LED class devices */ + error = picolcd_init_leds(data, picolcd_out_report(REPORT_LED_STATE, hdev)); + if (error) + goto err; + + picolcd_init_devfs(data, picolcd_out_report(REPORT_EE_READ, hdev), + picolcd_out_report(REPORT_EE_WRITE, hdev), + picolcd_out_report(REPORT_READ_MEMORY, hdev), + picolcd_out_report(REPORT_WRITE_MEMORY, hdev), + picolcd_out_report(REPORT_RESET, hdev)); + return 0; +err: + picolcd_exit_leds(data); + picolcd_exit_backlight(data); + picolcd_exit_lcd(data); + picolcd_exit_framebuffer(data); + picolcd_exit_cir(data); + picolcd_exit_keys(data); + return error; +} + +static int picolcd_probe_bootloader(struct hid_device *hdev, struct picolcd_data *data) +{ + picolcd_init_devfs(data, NULL, NULL, + picolcd_out_report(REPORT_BL_READ_MEMORY, hdev), + picolcd_out_report(REPORT_BL_WRITE_MEMORY, hdev), NULL); + return 0; +} + +static int picolcd_probe(struct hid_device *hdev, + const struct hid_device_id *id) +{ + struct picolcd_data *data; + int error = -ENOMEM; + + dbg_hid(PICOLCD_NAME " hardware probe...\n"); + + /* + * Let's allocate the picolcd data structure, set some reasonable + * defaults, and associate it with the device + */ + data = kzalloc(sizeof(struct picolcd_data), GFP_KERNEL); + if (data == NULL) { + hid_err(hdev, "can't allocate space for Minibox PicoLCD device data\n"); + error = -ENOMEM; + goto err_no_cleanup; + } + + spin_lock_init(&data->lock); + mutex_init(&data->mutex); + data->hdev = hdev; + data->opmode_delay = 5000; + if (hdev->product == USB_DEVICE_ID_PICOLCD_BOOTLOADER) + data->status |= PICOLCD_BOOTLOADER; + hid_set_drvdata(hdev, data); + + /* Parse the device reports and start it up */ + error = hid_parse(hdev); + if (error) { + hid_err(hdev, "device report parse failed\n"); + goto err_cleanup_data; + } + + error = hid_hw_start(hdev, 0); + if (error) { + hid_err(hdev, "hardware start failed\n"); + goto err_cleanup_data; + } + + error = hid_hw_open(hdev); + if (error) { + hid_err(hdev, "failed to open input interrupt pipe for key and IR events\n"); + goto err_cleanup_hid_hw; + } + + error = device_create_file(&hdev->dev, &dev_attr_operation_mode_delay); + if (error) { + hid_err(hdev, "failed to create sysfs attributes\n"); + goto err_cleanup_hid_ll; + } + + error = device_create_file(&hdev->dev, &dev_attr_operation_mode); + if (error) { + hid_err(hdev, "failed to create sysfs attributes\n"); + goto err_cleanup_sysfs1; + } + + if (data->status & PICOLCD_BOOTLOADER) + error = picolcd_probe_bootloader(hdev, data); + else + error = picolcd_probe_lcd(hdev, data); + if (error) + goto err_cleanup_sysfs2; + + dbg_hid(PICOLCD_NAME " activated and initialized\n"); + return 0; + +err_cleanup_sysfs2: + device_remove_file(&hdev->dev, &dev_attr_operation_mode); +err_cleanup_sysfs1: + device_remove_file(&hdev->dev, &dev_attr_operation_mode_delay); +err_cleanup_hid_ll: + hid_hw_close(hdev); +err_cleanup_hid_hw: + hid_hw_stop(hdev); +err_cleanup_data: + kfree(data); +err_no_cleanup: + hid_set_drvdata(hdev, NULL); + + return error; +} + +static void picolcd_remove(struct hid_device *hdev) +{ + struct picolcd_data *data = hid_get_drvdata(hdev); + unsigned long flags; + + dbg_hid(PICOLCD_NAME " hardware remove...\n"); + spin_lock_irqsave(&data->lock, flags); + data->status |= PICOLCD_FAILED; + spin_unlock_irqrestore(&data->lock, flags); + + picolcd_exit_devfs(data); + device_remove_file(&hdev->dev, &dev_attr_operation_mode); + device_remove_file(&hdev->dev, &dev_attr_operation_mode_delay); + hid_hw_close(hdev); + hid_hw_stop(hdev); + + /* Shortcut potential pending reply that will never arrive */ + spin_lock_irqsave(&data->lock, flags); + if (data->pending) + complete(&data->pending->ready); + spin_unlock_irqrestore(&data->lock, flags); + + /* Cleanup LED */ + picolcd_exit_leds(data); + /* Clean up the framebuffer */ + picolcd_exit_backlight(data); + picolcd_exit_lcd(data); + picolcd_exit_framebuffer(data); + /* Cleanup input */ + picolcd_exit_cir(data); + picolcd_exit_keys(data); + + hid_set_drvdata(hdev, NULL); + mutex_destroy(&data->mutex); + /* Finally, clean up the picolcd data itself */ + kfree(data); +} + +static const struct hid_device_id picolcd_devices[] = { + { HID_USB_DEVICE(USB_VENDOR_ID_MICROCHIP, USB_DEVICE_ID_PICOLCD) }, + { HID_USB_DEVICE(USB_VENDOR_ID_MICROCHIP, USB_DEVICE_ID_PICOLCD_BOOTLOADER) }, + { } +}; +MODULE_DEVICE_TABLE(hid, picolcd_devices); + +static struct hid_driver picolcd_driver = { + .name = "hid-picolcd", + .id_table = picolcd_devices, + .probe = picolcd_probe, + .remove = picolcd_remove, + .raw_event = picolcd_raw_event, +#ifdef CONFIG_PM + .suspend = picolcd_suspend, + .resume = picolcd_resume, + .reset_resume = picolcd_reset_resume, +#endif +}; + +static int __init picolcd_init(void) +{ + return hid_register_driver(&picolcd_driver); +} + +static void __exit picolcd_exit(void) +{ + hid_unregister_driver(&picolcd_driver); +} + +module_init(picolcd_init); +module_exit(picolcd_exit); +MODULE_DESCRIPTION("Minibox graphics PicoLCD Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/hid/hid-picolcd_debugfs.c b/drivers/hid/hid-picolcd_debugfs.c new file mode 100644 index 00000000000..4809aa1bdb9 --- /dev/null +++ b/drivers/hid/hid-picolcd_debugfs.c @@ -0,0 +1,899 @@ +/*************************************************************************** + * Copyright (C) 2010-2012 by Bruno Prémont <bonbons@linux-vserver.org> * + * * + * Based on Logitech G13 driver (v0.4) * + * Copyright (C) 2009 by Rick L. Vinyard, Jr. <rvinyard@cs.nmsu.edu> * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, version 2 of the License. * + * * + * This driver is distributed in the hope that it will be useful, but * + * WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * + * General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this software. If not see <http://www.gnu.org/licenses/>. * + ***************************************************************************/ + +#include <linux/hid.h> +#include <linux/hid-debug.h> +#include "usbhid/usbhid.h" +#include <linux/usb.h> + +#include <linux/fb.h> +#include <linux/seq_file.h> +#include <linux/debugfs.h> + +#include <linux/module.h> +#include <linux/uaccess.h> + +#include "hid-picolcd.h" + + +static int picolcd_debug_reset_show(struct seq_file *f, void *p) +{ + if (picolcd_fbinfo((struct picolcd_data *)f->private)) + seq_printf(f, "all fb\n"); + else + seq_printf(f, "all\n"); + return 0; +} + +static int picolcd_debug_reset_open(struct inode *inode, struct file *f) +{ + return single_open(f, picolcd_debug_reset_show, inode->i_private); +} + +static ssize_t picolcd_debug_reset_write(struct file *f, const char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct picolcd_data *data = ((struct seq_file *)f->private_data)->private; + char buf[32]; + size_t cnt = min(count, sizeof(buf)-1); + if (copy_from_user(buf, user_buf, cnt)) + return -EFAULT; + + while (cnt > 0 && (buf[cnt-1] == ' ' || buf[cnt-1] == '\n')) + cnt--; + buf[cnt] = '\0'; + if (strcmp(buf, "all") == 0) { + picolcd_reset(data->hdev); + picolcd_fb_reset(data, 1); + } else if (strcmp(buf, "fb") == 0) { + picolcd_fb_reset(data, 1); + } else { + return -EINVAL; + } + return count; +} + +static const struct file_operations picolcd_debug_reset_fops = { + .owner = THIS_MODULE, + .open = picolcd_debug_reset_open, + .read = seq_read, + .llseek = seq_lseek, + .write = picolcd_debug_reset_write, + .release = single_release, +}; + +/* + * The "eeprom" file + */ +static ssize_t picolcd_debug_eeprom_read(struct file *f, char __user *u, + size_t s, loff_t *off) +{ + struct picolcd_data *data = f->private_data; + struct picolcd_pending *resp; + u8 raw_data[3]; + ssize_t ret = -EIO; + + if (s == 0) + return -EINVAL; + if (*off > 0x0ff) + return 0; + + /* prepare buffer with info about what we want to read (addr & len) */ + raw_data[0] = *off & 0xff; + raw_data[1] = (*off >> 8) & 0xff; + raw_data[2] = s < 20 ? s : 20; + if (*off + raw_data[2] > 0xff) + raw_data[2] = 0x100 - *off; + resp = picolcd_send_and_wait(data->hdev, REPORT_EE_READ, raw_data, + sizeof(raw_data)); + if (!resp) + return -EIO; + + if (resp->in_report && resp->in_report->id == REPORT_EE_DATA) { + /* successful read :) */ + ret = resp->raw_data[2]; + if (ret > s) + ret = s; + if (copy_to_user(u, resp->raw_data+3, ret)) + ret = -EFAULT; + else + *off += ret; + } /* anything else is some kind of IO error */ + + kfree(resp); + return ret; +} + +static ssize_t picolcd_debug_eeprom_write(struct file *f, const char __user *u, + size_t s, loff_t *off) +{ + struct picolcd_data *data = f->private_data; + struct picolcd_pending *resp; + ssize_t ret = -EIO; + u8 raw_data[23]; + + if (s == 0) + return -EINVAL; + if (*off > 0x0ff) + return -ENOSPC; + + memset(raw_data, 0, sizeof(raw_data)); + raw_data[0] = *off & 0xff; + raw_data[1] = (*off >> 8) & 0xff; + raw_data[2] = min_t(size_t, 20, s); + if (*off + raw_data[2] > 0xff) + raw_data[2] = 0x100 - *off; + + if (copy_from_user(raw_data+3, u, min((u8)20, raw_data[2]))) + return -EFAULT; + resp = picolcd_send_and_wait(data->hdev, REPORT_EE_WRITE, raw_data, + sizeof(raw_data)); + + if (!resp) + return -EIO; + + if (resp->in_report && resp->in_report->id == REPORT_EE_DATA) { + /* check if written data matches */ + if (memcmp(raw_data, resp->raw_data, 3+raw_data[2]) == 0) { + *off += raw_data[2]; + ret = raw_data[2]; + } + } + kfree(resp); + return ret; +} + +/* + * Notes: + * - read/write happens in chunks of at most 20 bytes, it's up to userspace + * to loop in order to get more data. + * - on write errors on otherwise correct write request the bytes + * that should have been written are in undefined state. + */ +static const struct file_operations picolcd_debug_eeprom_fops = { + .owner = THIS_MODULE, + .open = simple_open, + .read = picolcd_debug_eeprom_read, + .write = picolcd_debug_eeprom_write, + .llseek = generic_file_llseek, +}; + +/* + * The "flash" file + */ +/* record a flash address to buf (bounds check to be done by caller) */ +static int _picolcd_flash_setaddr(struct picolcd_data *data, u8 *buf, long off) +{ + buf[0] = off & 0xff; + buf[1] = (off >> 8) & 0xff; + if (data->addr_sz == 3) + buf[2] = (off >> 16) & 0xff; + return data->addr_sz == 2 ? 2 : 3; +} + +/* read a given size of data (bounds check to be done by caller) */ +static ssize_t _picolcd_flash_read(struct picolcd_data *data, int report_id, + char __user *u, size_t s, loff_t *off) +{ + struct picolcd_pending *resp; + u8 raw_data[4]; + ssize_t ret = 0; + int len_off, err = -EIO; + + while (s > 0) { + err = -EIO; + len_off = _picolcd_flash_setaddr(data, raw_data, *off); + raw_data[len_off] = s > 32 ? 32 : s; + resp = picolcd_send_and_wait(data->hdev, report_id, raw_data, len_off+1); + if (!resp || !resp->in_report) + goto skip; + if (resp->in_report->id == REPORT_MEMORY || + resp->in_report->id == REPORT_BL_READ_MEMORY) { + if (memcmp(raw_data, resp->raw_data, len_off+1) != 0) + goto skip; + if (copy_to_user(u+ret, resp->raw_data+len_off+1, raw_data[len_off])) { + err = -EFAULT; + goto skip; + } + *off += raw_data[len_off]; + s -= raw_data[len_off]; + ret += raw_data[len_off]; + err = 0; + } +skip: + kfree(resp); + if (err) + return ret > 0 ? ret : err; + } + return ret; +} + +static ssize_t picolcd_debug_flash_read(struct file *f, char __user *u, + size_t s, loff_t *off) +{ + struct picolcd_data *data = f->private_data; + + if (s == 0) + return -EINVAL; + if (*off > 0x05fff) + return 0; + if (*off + s > 0x05fff) + s = 0x06000 - *off; + + if (data->status & PICOLCD_BOOTLOADER) + return _picolcd_flash_read(data, REPORT_BL_READ_MEMORY, u, s, off); + else + return _picolcd_flash_read(data, REPORT_READ_MEMORY, u, s, off); +} + +/* erase block aligned to 64bytes boundary */ +static ssize_t _picolcd_flash_erase64(struct picolcd_data *data, int report_id, + loff_t *off) +{ + struct picolcd_pending *resp; + u8 raw_data[3]; + int len_off; + ssize_t ret = -EIO; + + if (*off & 0x3f) + return -EINVAL; + + len_off = _picolcd_flash_setaddr(data, raw_data, *off); + resp = picolcd_send_and_wait(data->hdev, report_id, raw_data, len_off); + if (!resp || !resp->in_report) + goto skip; + if (resp->in_report->id == REPORT_MEMORY || + resp->in_report->id == REPORT_BL_ERASE_MEMORY) { + if (memcmp(raw_data, resp->raw_data, len_off) != 0) + goto skip; + ret = 0; + } +skip: + kfree(resp); + return ret; +} + +/* write a given size of data (bounds check to be done by caller) */ +static ssize_t _picolcd_flash_write(struct picolcd_data *data, int report_id, + const char __user *u, size_t s, loff_t *off) +{ + struct picolcd_pending *resp; + u8 raw_data[36]; + ssize_t ret = 0; + int len_off, err = -EIO; + + while (s > 0) { + err = -EIO; + len_off = _picolcd_flash_setaddr(data, raw_data, *off); + raw_data[len_off] = s > 32 ? 32 : s; + if (copy_from_user(raw_data+len_off+1, u, raw_data[len_off])) { + err = -EFAULT; + break; + } + resp = picolcd_send_and_wait(data->hdev, report_id, raw_data, + len_off+1+raw_data[len_off]); + if (!resp || !resp->in_report) + goto skip; + if (resp->in_report->id == REPORT_MEMORY || + resp->in_report->id == REPORT_BL_WRITE_MEMORY) { + if (memcmp(raw_data, resp->raw_data, len_off+1+raw_data[len_off]) != 0) + goto skip; + *off += raw_data[len_off]; + s -= raw_data[len_off]; + ret += raw_data[len_off]; + err = 0; + } +skip: + kfree(resp); + if (err) + break; + } + return ret > 0 ? ret : err; +} + +static ssize_t picolcd_debug_flash_write(struct file *f, const char __user *u, + size_t s, loff_t *off) +{ + struct picolcd_data *data = f->private_data; + ssize_t err, ret = 0; + int report_erase, report_write; + + if (s == 0) + return -EINVAL; + if (*off > 0x5fff) + return -ENOSPC; + if (s & 0x3f) + return -EINVAL; + if (*off & 0x3f) + return -EINVAL; + + if (data->status & PICOLCD_BOOTLOADER) { + report_erase = REPORT_BL_ERASE_MEMORY; + report_write = REPORT_BL_WRITE_MEMORY; + } else { + report_erase = REPORT_ERASE_MEMORY; + report_write = REPORT_WRITE_MEMORY; + } + mutex_lock(&data->mutex_flash); + while (s > 0) { + err = _picolcd_flash_erase64(data, report_erase, off); + if (err) + break; + err = _picolcd_flash_write(data, report_write, u, 64, off); + if (err < 0) + break; + ret += err; + *off += err; + s -= err; + if (err != 64) + break; + } + mutex_unlock(&data->mutex_flash); + return ret > 0 ? ret : err; +} + +/* + * Notes: + * - concurrent writing is prevented by mutex and all writes must be + * n*64 bytes and 64-byte aligned, each write being preceded by an + * ERASE which erases a 64byte block. + * If less than requested was written or an error is returned for an + * otherwise correct write request the next 64-byte block which should + * have been written is in undefined state (mostly: original, erased, + * (half-)written with write error) + * - reading can happen without special restriction + */ +static const struct file_operations picolcd_debug_flash_fops = { + .owner = THIS_MODULE, + .open = simple_open, + .read = picolcd_debug_flash_read, + .write = picolcd_debug_flash_write, + .llseek = generic_file_llseek, +}; + + +/* + * Helper code for HID report level dumping/debugging + */ +static const char * const error_codes[] = { + "success", "parameter missing", "data_missing", "block readonly", + "block not erasable", "block too big", "section overflow", + "invalid command length", "invalid data length", +}; + +static void dump_buff_as_hex(char *dst, size_t dst_sz, const u8 *data, + const size_t data_len) +{ + int i, j; + for (i = j = 0; i < data_len && j + 4 < dst_sz; i++) { + dst[j++] = hex_asc[(data[i] >> 4) & 0x0f]; + dst[j++] = hex_asc[data[i] & 0x0f]; + dst[j++] = ' '; + } + dst[j] = '\0'; + if (j > 0) + dst[j-1] = '\n'; + if (i < data_len && j > 2) + dst[j-2] = dst[j-3] = '.'; +} + +void picolcd_debug_out_report(struct picolcd_data *data, + struct hid_device *hdev, struct hid_report *report) +{ + u8 raw_data[70]; + int raw_size = (report->size >> 3) + 1; + char *buff; +#define BUFF_SZ 256 + + /* Avoid unnecessary overhead if debugfs is disabled */ + if (list_empty(&hdev->debug_list)) + return; + + buff = kmalloc(BUFF_SZ, GFP_ATOMIC); + if (!buff) + return; + + snprintf(buff, BUFF_SZ, "\nout report %d (size %d) = ", + report->id, raw_size); + hid_debug_event(hdev, buff); + if (raw_size + 5 > sizeof(raw_data)) { + kfree(buff); + hid_debug_event(hdev, " TOO BIG\n"); + return; + } else { + raw_data[0] = report->id; + hid_output_report(report, raw_data); + dump_buff_as_hex(buff, BUFF_SZ, raw_data, raw_size); + hid_debug_event(hdev, buff); + } + + switch (report->id) { + case REPORT_LED_STATE: + /* 1 data byte with GPO state */ + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", + "REPORT_LED_STATE", report->id, raw_size-1); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tGPO state: 0x%02x\n", raw_data[1]); + hid_debug_event(hdev, buff); + break; + case REPORT_BRIGHTNESS: + /* 1 data byte with brightness */ + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", + "REPORT_BRIGHTNESS", report->id, raw_size-1); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tBrightness: 0x%02x\n", raw_data[1]); + hid_debug_event(hdev, buff); + break; + case REPORT_CONTRAST: + /* 1 data byte with contrast */ + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", + "REPORT_CONTRAST", report->id, raw_size-1); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tContrast: 0x%02x\n", raw_data[1]); + hid_debug_event(hdev, buff); + break; + case REPORT_RESET: + /* 2 data bytes with reset duration in ms */ + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", + "REPORT_RESET", report->id, raw_size-1); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tDuration: 0x%02x%02x (%dms)\n", + raw_data[2], raw_data[1], raw_data[2] << 8 | raw_data[1]); + hid_debug_event(hdev, buff); + break; + case REPORT_LCD_CMD: + /* 63 data bytes with LCD commands */ + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", + "REPORT_LCD_CMD", report->id, raw_size-1); + hid_debug_event(hdev, buff); + /* TODO: format decoding */ + break; + case REPORT_LCD_DATA: + /* 63 data bytes with LCD data */ + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", + "REPORT_LCD_CMD", report->id, raw_size-1); + /* TODO: format decoding */ + hid_debug_event(hdev, buff); + break; + case REPORT_LCD_CMD_DATA: + /* 63 data bytes with LCD commands and data */ + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", + "REPORT_LCD_CMD", report->id, raw_size-1); + /* TODO: format decoding */ + hid_debug_event(hdev, buff); + break; + case REPORT_EE_READ: + /* 3 data bytes with read area description */ + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", + "REPORT_EE_READ", report->id, raw_size-1); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x\n", + raw_data[2], raw_data[1]); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[3]); + hid_debug_event(hdev, buff); + break; + case REPORT_EE_WRITE: + /* 3+1..20 data bytes with write area description */ + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", + "REPORT_EE_WRITE", report->id, raw_size-1); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x\n", + raw_data[2], raw_data[1]); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[3]); + hid_debug_event(hdev, buff); + if (raw_data[3] == 0) { + snprintf(buff, BUFF_SZ, "\tNo data\n"); + } else if (raw_data[3] + 4 <= raw_size) { + snprintf(buff, BUFF_SZ, "\tData: "); + hid_debug_event(hdev, buff); + dump_buff_as_hex(buff, BUFF_SZ, raw_data+4, raw_data[3]); + } else { + snprintf(buff, BUFF_SZ, "\tData overflowed\n"); + } + hid_debug_event(hdev, buff); + break; + case REPORT_ERASE_MEMORY: + case REPORT_BL_ERASE_MEMORY: + /* 3 data bytes with pointer inside erase block */ + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", + "REPORT_ERASE_MEMORY", report->id, raw_size-1); + hid_debug_event(hdev, buff); + switch (data->addr_sz) { + case 2: + snprintf(buff, BUFF_SZ, "\tAddress inside 64 byte block: 0x%02x%02x\n", + raw_data[2], raw_data[1]); + break; + case 3: + snprintf(buff, BUFF_SZ, "\tAddress inside 64 byte block: 0x%02x%02x%02x\n", + raw_data[3], raw_data[2], raw_data[1]); + break; + default: + snprintf(buff, BUFF_SZ, "\tNot supported\n"); + } + hid_debug_event(hdev, buff); + break; + case REPORT_READ_MEMORY: + case REPORT_BL_READ_MEMORY: + /* 4 data bytes with read area description */ + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", + "REPORT_READ_MEMORY", report->id, raw_size-1); + hid_debug_event(hdev, buff); + switch (data->addr_sz) { + case 2: + snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x\n", + raw_data[2], raw_data[1]); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[3]); + break; + case 3: + snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x%02x\n", + raw_data[3], raw_data[2], raw_data[1]); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[4]); + break; + default: + snprintf(buff, BUFF_SZ, "\tNot supported\n"); + } + hid_debug_event(hdev, buff); + break; + case REPORT_WRITE_MEMORY: + case REPORT_BL_WRITE_MEMORY: + /* 4+1..32 data bytes with write adrea description */ + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", + "REPORT_WRITE_MEMORY", report->id, raw_size-1); + hid_debug_event(hdev, buff); + switch (data->addr_sz) { + case 2: + snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x\n", + raw_data[2], raw_data[1]); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[3]); + hid_debug_event(hdev, buff); + if (raw_data[3] == 0) { + snprintf(buff, BUFF_SZ, "\tNo data\n"); + } else if (raw_data[3] + 4 <= raw_size) { + snprintf(buff, BUFF_SZ, "\tData: "); + hid_debug_event(hdev, buff); + dump_buff_as_hex(buff, BUFF_SZ, raw_data+4, raw_data[3]); + } else { + snprintf(buff, BUFF_SZ, "\tData overflowed\n"); + } + break; + case 3: + snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x%02x\n", + raw_data[3], raw_data[2], raw_data[1]); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[4]); + hid_debug_event(hdev, buff); + if (raw_data[4] == 0) { + snprintf(buff, BUFF_SZ, "\tNo data\n"); + } else if (raw_data[4] + 5 <= raw_size) { + snprintf(buff, BUFF_SZ, "\tData: "); + hid_debug_event(hdev, buff); + dump_buff_as_hex(buff, BUFF_SZ, raw_data+5, raw_data[4]); + } else { + snprintf(buff, BUFF_SZ, "\tData overflowed\n"); + } + break; + default: + snprintf(buff, BUFF_SZ, "\tNot supported\n"); + } + hid_debug_event(hdev, buff); + break; + case REPORT_SPLASH_RESTART: + /* TODO */ + break; + case REPORT_EXIT_KEYBOARD: + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", + "REPORT_EXIT_KEYBOARD", report->id, raw_size-1); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tRestart delay: %dms (0x%02x%02x)\n", + raw_data[1] | (raw_data[2] << 8), + raw_data[2], raw_data[1]); + hid_debug_event(hdev, buff); + break; + case REPORT_VERSION: + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", + "REPORT_VERSION", report->id, raw_size-1); + hid_debug_event(hdev, buff); + break; + case REPORT_DEVID: + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", + "REPORT_DEVID", report->id, raw_size-1); + hid_debug_event(hdev, buff); + break; + case REPORT_SPLASH_SIZE: + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", + "REPORT_SPLASH_SIZE", report->id, raw_size-1); + hid_debug_event(hdev, buff); + break; + case REPORT_HOOK_VERSION: + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", + "REPORT_HOOK_VERSION", report->id, raw_size-1); + hid_debug_event(hdev, buff); + break; + case REPORT_EXIT_FLASHER: + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", + "REPORT_VERSION", report->id, raw_size-1); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tRestart delay: %dms (0x%02x%02x)\n", + raw_data[1] | (raw_data[2] << 8), + raw_data[2], raw_data[1]); + hid_debug_event(hdev, buff); + break; + default: + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", + "<unknown>", report->id, raw_size-1); + hid_debug_event(hdev, buff); + break; + } + wake_up_interruptible(&hdev->debug_wait); + kfree(buff); +} + +void picolcd_debug_raw_event(struct picolcd_data *data, + struct hid_device *hdev, struct hid_report *report, + u8 *raw_data, int size) +{ + char *buff; + +#define BUFF_SZ 256 + /* Avoid unnecessary overhead if debugfs is disabled */ + if (list_empty(&hdev->debug_list)) + return; + + buff = kmalloc(BUFF_SZ, GFP_ATOMIC); + if (!buff) + return; + + switch (report->id) { + case REPORT_ERROR_CODE: + /* 2 data bytes with affected report and error code */ + snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", + "REPORT_ERROR_CODE", report->id, size-1); + hid_debug_event(hdev, buff); + if (raw_data[2] < ARRAY_SIZE(error_codes)) + snprintf(buff, BUFF_SZ, "\tError code 0x%02x (%s) in reply to report 0x%02x\n", + raw_data[2], error_codes[raw_data[2]], raw_data[1]); + else + snprintf(buff, BUFF_SZ, "\tError code 0x%02x in reply to report 0x%02x\n", + raw_data[2], raw_data[1]); + hid_debug_event(hdev, buff); + break; + case REPORT_KEY_STATE: + /* 2 data bytes with key state */ + snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", + "REPORT_KEY_STATE", report->id, size-1); + hid_debug_event(hdev, buff); + if (raw_data[1] == 0) + snprintf(buff, BUFF_SZ, "\tNo key pressed\n"); + else if (raw_data[2] == 0) + snprintf(buff, BUFF_SZ, "\tOne key pressed: 0x%02x (%d)\n", + raw_data[1], raw_data[1]); + else + snprintf(buff, BUFF_SZ, "\tTwo keys pressed: 0x%02x (%d), 0x%02x (%d)\n", + raw_data[1], raw_data[1], raw_data[2], raw_data[2]); + hid_debug_event(hdev, buff); + break; + case REPORT_IR_DATA: + /* Up to 20 byes of IR scancode data */ + snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", + "REPORT_IR_DATA", report->id, size-1); + hid_debug_event(hdev, buff); + if (raw_data[1] == 0) { + snprintf(buff, BUFF_SZ, "\tUnexpectedly 0 data length\n"); + hid_debug_event(hdev, buff); + } else if (raw_data[1] + 1 <= size) { + snprintf(buff, BUFF_SZ, "\tData length: %d\n\tIR Data: ", + raw_data[1]); + hid_debug_event(hdev, buff); + dump_buff_as_hex(buff, BUFF_SZ, raw_data+2, raw_data[1]); + hid_debug_event(hdev, buff); + } else { + snprintf(buff, BUFF_SZ, "\tOverflowing data length: %d\n", + raw_data[1]-1); + hid_debug_event(hdev, buff); + } + break; + case REPORT_EE_DATA: + /* Data buffer in response to REPORT_EE_READ or REPORT_EE_WRITE */ + snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", + "REPORT_EE_DATA", report->id, size-1); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x\n", + raw_data[2], raw_data[1]); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[3]); + hid_debug_event(hdev, buff); + if (raw_data[3] == 0) { + snprintf(buff, BUFF_SZ, "\tNo data\n"); + hid_debug_event(hdev, buff); + } else if (raw_data[3] + 4 <= size) { + snprintf(buff, BUFF_SZ, "\tData: "); + hid_debug_event(hdev, buff); + dump_buff_as_hex(buff, BUFF_SZ, raw_data+4, raw_data[3]); + hid_debug_event(hdev, buff); + } else { + snprintf(buff, BUFF_SZ, "\tData overflowed\n"); + hid_debug_event(hdev, buff); + } + break; + case REPORT_MEMORY: + /* Data buffer in response to REPORT_READ_MEMORY or REPORT_WRTIE_MEMORY */ + snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", + "REPORT_MEMORY", report->id, size-1); + hid_debug_event(hdev, buff); + switch (data->addr_sz) { + case 2: + snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x\n", + raw_data[2], raw_data[1]); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[3]); + hid_debug_event(hdev, buff); + if (raw_data[3] == 0) { + snprintf(buff, BUFF_SZ, "\tNo data\n"); + } else if (raw_data[3] + 4 <= size) { + snprintf(buff, BUFF_SZ, "\tData: "); + hid_debug_event(hdev, buff); + dump_buff_as_hex(buff, BUFF_SZ, raw_data+4, raw_data[3]); + } else { + snprintf(buff, BUFF_SZ, "\tData overflowed\n"); + } + break; + case 3: + snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x%02x\n", + raw_data[3], raw_data[2], raw_data[1]); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[4]); + hid_debug_event(hdev, buff); + if (raw_data[4] == 0) { + snprintf(buff, BUFF_SZ, "\tNo data\n"); + } else if (raw_data[4] + 5 <= size) { + snprintf(buff, BUFF_SZ, "\tData: "); + hid_debug_event(hdev, buff); + dump_buff_as_hex(buff, BUFF_SZ, raw_data+5, raw_data[4]); + } else { + snprintf(buff, BUFF_SZ, "\tData overflowed\n"); + } + break; + default: + snprintf(buff, BUFF_SZ, "\tNot supported\n"); + } + hid_debug_event(hdev, buff); + break; + case REPORT_VERSION: + snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", + "REPORT_VERSION", report->id, size-1); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tFirmware version: %d.%d\n", + raw_data[2], raw_data[1]); + hid_debug_event(hdev, buff); + break; + case REPORT_BL_ERASE_MEMORY: + snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", + "REPORT_BL_ERASE_MEMORY", report->id, size-1); + hid_debug_event(hdev, buff); + /* TODO */ + break; + case REPORT_BL_READ_MEMORY: + snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", + "REPORT_BL_READ_MEMORY", report->id, size-1); + hid_debug_event(hdev, buff); + /* TODO */ + break; + case REPORT_BL_WRITE_MEMORY: + snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", + "REPORT_BL_WRITE_MEMORY", report->id, size-1); + hid_debug_event(hdev, buff); + /* TODO */ + break; + case REPORT_DEVID: + snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", + "REPORT_DEVID", report->id, size-1); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tSerial: 0x%02x%02x%02x%02x\n", + raw_data[1], raw_data[2], raw_data[3], raw_data[4]); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tType: 0x%02x\n", + raw_data[5]); + hid_debug_event(hdev, buff); + break; + case REPORT_SPLASH_SIZE: + snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", + "REPORT_SPLASH_SIZE", report->id, size-1); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tTotal splash space: %d\n", + (raw_data[2] << 8) | raw_data[1]); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tUsed splash space: %d\n", + (raw_data[4] << 8) | raw_data[3]); + hid_debug_event(hdev, buff); + break; + case REPORT_HOOK_VERSION: + snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", + "REPORT_HOOK_VERSION", report->id, size-1); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tFirmware version: %d.%d\n", + raw_data[1], raw_data[2]); + hid_debug_event(hdev, buff); + break; + default: + snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", + "<unknown>", report->id, size-1); + hid_debug_event(hdev, buff); + break; + } + wake_up_interruptible(&hdev->debug_wait); + kfree(buff); +} + +void picolcd_init_devfs(struct picolcd_data *data, + struct hid_report *eeprom_r, struct hid_report *eeprom_w, + struct hid_report *flash_r, struct hid_report *flash_w, + struct hid_report *reset) +{ + struct hid_device *hdev = data->hdev; + + mutex_init(&data->mutex_flash); + + /* reset */ + if (reset) + data->debug_reset = debugfs_create_file("reset", 0600, + hdev->debug_dir, data, &picolcd_debug_reset_fops); + + /* eeprom */ + if (eeprom_r || eeprom_w) + data->debug_eeprom = debugfs_create_file("eeprom", + (eeprom_w ? S_IWUSR : 0) | (eeprom_r ? S_IRUSR : 0), + hdev->debug_dir, data, &picolcd_debug_eeprom_fops); + + /* flash */ + if (flash_r && flash_r->maxfield == 1 && flash_r->field[0]->report_size == 8) + data->addr_sz = flash_r->field[0]->report_count - 1; + else + data->addr_sz = -1; + if (data->addr_sz == 2 || data->addr_sz == 3) { + data->debug_flash = debugfs_create_file("flash", + (flash_w ? S_IWUSR : 0) | (flash_r ? S_IRUSR : 0), + hdev->debug_dir, data, &picolcd_debug_flash_fops); + } else if (flash_r || flash_w) + hid_warn(hdev, "Unexpected FLASH access reports, please submit rdesc for review\n"); +} + +void picolcd_exit_devfs(struct picolcd_data *data) +{ + struct dentry *dent; + + dent = data->debug_reset; + data->debug_reset = NULL; + if (dent) + debugfs_remove(dent); + dent = data->debug_eeprom; + data->debug_eeprom = NULL; + if (dent) + debugfs_remove(dent); + dent = data->debug_flash; + data->debug_flash = NULL; + if (dent) + debugfs_remove(dent); + mutex_destroy(&data->mutex_flash); +} + diff --git a/drivers/hid/hid-picolcd_fb.c b/drivers/hid/hid-picolcd_fb.c new file mode 100644 index 00000000000..0008a512211 --- /dev/null +++ b/drivers/hid/hid-picolcd_fb.c @@ -0,0 +1,615 @@ +/*************************************************************************** + * Copyright (C) 2010-2012 by Bruno Prémont <bonbons@linux-vserver.org> * + * * + * Based on Logitech G13 driver (v0.4) * + * Copyright (C) 2009 by Rick L. Vinyard, Jr. <rvinyard@cs.nmsu.edu> * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, version 2 of the License. * + * * + * This driver is distributed in the hope that it will be useful, but * + * WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * + * General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this software. If not see <http://www.gnu.org/licenses/>. * + ***************************************************************************/ + +#include <linux/hid.h> +#include <linux/vmalloc.h> +#include "usbhid/usbhid.h" +#include <linux/usb.h> + +#include <linux/fb.h> +#include <linux/module.h> + +#include "hid-picolcd.h" + +/* Framebuffer + * + * The PicoLCD use a Topway LCD module of 256x64 pixel + * This display area is tiled over 4 controllers with 8 tiles + * each. Each tile has 8x64 pixel, each data byte representing + * a 1-bit wide vertical line of the tile. + * + * The display can be updated at a tile granularity. + * + * Chip 1 Chip 2 Chip 3 Chip 4 + * +----------------+----------------+----------------+----------------+ + * | Tile 1 | Tile 1 | Tile 1 | Tile 1 | + * +----------------+----------------+----------------+----------------+ + * | Tile 2 | Tile 2 | Tile 2 | Tile 2 | + * +----------------+----------------+----------------+----------------+ + * ... + * +----------------+----------------+----------------+----------------+ + * | Tile 8 | Tile 8 | Tile 8 | Tile 8 | + * +----------------+----------------+----------------+----------------+ + */ +#define PICOLCDFB_NAME "picolcdfb" +#define PICOLCDFB_WIDTH (256) +#define PICOLCDFB_HEIGHT (64) +#define PICOLCDFB_SIZE (PICOLCDFB_WIDTH * PICOLCDFB_HEIGHT / 8) + +#define PICOLCDFB_UPDATE_RATE_LIMIT 10 +#define PICOLCDFB_UPDATE_RATE_DEFAULT 2 + +/* Framebuffer visual structures */ +static const struct fb_fix_screeninfo picolcdfb_fix = { + .id = PICOLCDFB_NAME, + .type = FB_TYPE_PACKED_PIXELS, + .visual = FB_VISUAL_MONO01, + .xpanstep = 0, + .ypanstep = 0, + .ywrapstep = 0, + .line_length = PICOLCDFB_WIDTH / 8, + .accel = FB_ACCEL_NONE, +}; + +static const struct fb_var_screeninfo picolcdfb_var = { + .xres = PICOLCDFB_WIDTH, + .yres = PICOLCDFB_HEIGHT, + .xres_virtual = PICOLCDFB_WIDTH, + .yres_virtual = PICOLCDFB_HEIGHT, + .width = 103, + .height = 26, + .bits_per_pixel = 1, + .grayscale = 1, + .red = { + .offset = 0, + .length = 1, + .msb_right = 0, + }, + .green = { + .offset = 0, + .length = 1, + .msb_right = 0, + }, + .blue = { + .offset = 0, + .length = 1, + .msb_right = 0, + }, + .transp = { + .offset = 0, + .length = 0, + .msb_right = 0, + }, +}; + +/* Send a given tile to PicoLCD */ +static int picolcd_fb_send_tile(struct picolcd_data *data, u8 *vbitmap, + int chip, int tile) +{ + struct hid_report *report1, *report2; + unsigned long flags; + u8 *tdata; + int i; + + report1 = picolcd_out_report(REPORT_LCD_CMD_DATA, data->hdev); + if (!report1 || report1->maxfield != 1) + return -ENODEV; + report2 = picolcd_out_report(REPORT_LCD_DATA, data->hdev); + if (!report2 || report2->maxfield != 1) + return -ENODEV; + + spin_lock_irqsave(&data->lock, flags); + if ((data->status & PICOLCD_FAILED)) { + spin_unlock_irqrestore(&data->lock, flags); + return -ENODEV; + } + hid_set_field(report1->field[0], 0, chip << 2); + hid_set_field(report1->field[0], 1, 0x02); + hid_set_field(report1->field[0], 2, 0x00); + hid_set_field(report1->field[0], 3, 0x00); + hid_set_field(report1->field[0], 4, 0xb8 | tile); + hid_set_field(report1->field[0], 5, 0x00); + hid_set_field(report1->field[0], 6, 0x00); + hid_set_field(report1->field[0], 7, 0x40); + hid_set_field(report1->field[0], 8, 0x00); + hid_set_field(report1->field[0], 9, 0x00); + hid_set_field(report1->field[0], 10, 32); + + hid_set_field(report2->field[0], 0, (chip << 2) | 0x01); + hid_set_field(report2->field[0], 1, 0x00); + hid_set_field(report2->field[0], 2, 0x00); + hid_set_field(report2->field[0], 3, 32); + + tdata = vbitmap + (tile * 4 + chip) * 64; + for (i = 0; i < 64; i++) + if (i < 32) + hid_set_field(report1->field[0], 11 + i, tdata[i]); + else + hid_set_field(report2->field[0], 4 + i - 32, tdata[i]); + + usbhid_submit_report(data->hdev, report1, USB_DIR_OUT); + usbhid_submit_report(data->hdev, report2, USB_DIR_OUT); + spin_unlock_irqrestore(&data->lock, flags); + return 0; +} + +/* Translate a single tile*/ +static int picolcd_fb_update_tile(u8 *vbitmap, const u8 *bitmap, int bpp, + int chip, int tile) +{ + int i, b, changed = 0; + u8 tdata[64]; + u8 *vdata = vbitmap + (tile * 4 + chip) * 64; + + if (bpp == 1) { + for (b = 7; b >= 0; b--) { + const u8 *bdata = bitmap + tile * 256 + chip * 8 + b * 32; + for (i = 0; i < 64; i++) { + tdata[i] <<= 1; + tdata[i] |= (bdata[i/8] >> (i % 8)) & 0x01; + } + } + } else if (bpp == 8) { + for (b = 7; b >= 0; b--) { + const u8 *bdata = bitmap + (tile * 256 + chip * 8 + b * 32) * 8; + for (i = 0; i < 64; i++) { + tdata[i] <<= 1; + tdata[i] |= (bdata[i] & 0x80) ? 0x01 : 0x00; + } + } + } else { + /* Oops, we should never get here! */ + WARN_ON(1); + return 0; + } + + for (i = 0; i < 64; i++) + if (tdata[i] != vdata[i]) { + changed = 1; + vdata[i] = tdata[i]; + } + return changed; +} + +void picolcd_fb_refresh(struct picolcd_data *data) +{ + if (data->fb_info) + schedule_delayed_work(&data->fb_info->deferred_work, 0); +} + +/* Reconfigure LCD display */ +int picolcd_fb_reset(struct picolcd_data *data, int clear) +{ + struct hid_report *report = picolcd_out_report(REPORT_LCD_CMD, data->hdev); + struct picolcd_fb_data *fbdata = data->fb_info->par; + int i, j; + unsigned long flags; + static const u8 mapcmd[8] = { 0x00, 0x02, 0x00, 0x64, 0x3f, 0x00, 0x64, 0xc0 }; + + if (!report || report->maxfield != 1) + return -ENODEV; + + spin_lock_irqsave(&data->lock, flags); + for (i = 0; i < 4; i++) { + for (j = 0; j < report->field[0]->maxusage; j++) + if (j == 0) + hid_set_field(report->field[0], j, i << 2); + else if (j < sizeof(mapcmd)) + hid_set_field(report->field[0], j, mapcmd[j]); + else + hid_set_field(report->field[0], j, 0); + usbhid_submit_report(data->hdev, report, USB_DIR_OUT); + } + spin_unlock_irqrestore(&data->lock, flags); + + if (clear) { + memset(fbdata->vbitmap, 0, PICOLCDFB_SIZE); + memset(fbdata->bitmap, 0, PICOLCDFB_SIZE*fbdata->bpp); + } + fbdata->force = 1; + + /* schedule first output of framebuffer */ + if (fbdata->ready) + schedule_delayed_work(&data->fb_info->deferred_work, 0); + else + fbdata->ready = 1; + + return 0; +} + +/* Update fb_vbitmap from the screen_base and send changed tiles to device */ +static void picolcd_fb_update(struct fb_info *info) +{ + int chip, tile, n; + unsigned long flags; + struct picolcd_fb_data *fbdata = info->par; + struct picolcd_data *data; + + mutex_lock(&info->lock); + + spin_lock_irqsave(&fbdata->lock, flags); + if (!fbdata->ready && fbdata->picolcd) + picolcd_fb_reset(fbdata->picolcd, 0); + spin_unlock_irqrestore(&fbdata->lock, flags); + + /* + * Translate the framebuffer into the format needed by the PicoLCD. + * See display layout above. + * Do this one tile after the other and push those tiles that changed. + * + * Wait for our IO to complete as otherwise we might flood the queue! + */ + n = 0; + for (chip = 0; chip < 4; chip++) + for (tile = 0; tile < 8; tile++) { + if (!fbdata->force && !picolcd_fb_update_tile( + fbdata->vbitmap, fbdata->bitmap, + fbdata->bpp, chip, tile)) + continue; + n += 2; + if (n >= HID_OUTPUT_FIFO_SIZE / 2) { + spin_lock_irqsave(&fbdata->lock, flags); + data = fbdata->picolcd; + spin_unlock_irqrestore(&fbdata->lock, flags); + mutex_unlock(&info->lock); + if (!data) + return; + usbhid_wait_io(data->hdev); + mutex_lock(&info->lock); + n = 0; + } + spin_lock_irqsave(&fbdata->lock, flags); + data = fbdata->picolcd; + spin_unlock_irqrestore(&fbdata->lock, flags); + if (!data || picolcd_fb_send_tile(data, + fbdata->vbitmap, chip, tile)) + goto out; + } + fbdata->force = false; + if (n) { + spin_lock_irqsave(&fbdata->lock, flags); + data = fbdata->picolcd; + spin_unlock_irqrestore(&fbdata->lock, flags); + mutex_unlock(&info->lock); + if (data) + usbhid_wait_io(data->hdev); + return; + } +out: + mutex_unlock(&info->lock); +} + +/* Stub to call the system default and update the image on the picoLCD */ +static void picolcd_fb_fillrect(struct fb_info *info, + const struct fb_fillrect *rect) +{ + if (!info->par) + return; + sys_fillrect(info, rect); + + schedule_delayed_work(&info->deferred_work, 0); +} + +/* Stub to call the system default and update the image on the picoLCD */ +static void picolcd_fb_copyarea(struct fb_info *info, + const struct fb_copyarea *area) +{ + if (!info->par) + return; + sys_copyarea(info, area); + + schedule_delayed_work(&info->deferred_work, 0); +} + +/* Stub to call the system default and update the image on the picoLCD */ +static void picolcd_fb_imageblit(struct fb_info *info, const struct fb_image *image) +{ + if (!info->par) + return; + sys_imageblit(info, image); + + schedule_delayed_work(&info->deferred_work, 0); +} + +/* + * this is the slow path from userspace. they can seek and write to + * the fb. it's inefficient to do anything less than a full screen draw + */ +static ssize_t picolcd_fb_write(struct fb_info *info, const char __user *buf, + size_t count, loff_t *ppos) +{ + ssize_t ret; + if (!info->par) + return -ENODEV; + ret = fb_sys_write(info, buf, count, ppos); + if (ret >= 0) + schedule_delayed_work(&info->deferred_work, 0); + return ret; +} + +static int picolcd_fb_blank(int blank, struct fb_info *info) +{ + /* We let fb notification do this for us via lcd/backlight device */ + return 0; +} + +static void picolcd_fb_destroy(struct fb_info *info) +{ + struct picolcd_fb_data *fbdata = info->par; + + /* make sure no work is deferred */ + fb_deferred_io_cleanup(info); + + /* No thridparty should ever unregister our framebuffer! */ + WARN_ON(fbdata->picolcd != NULL); + + vfree((u8 *)info->fix.smem_start); + framebuffer_release(info); +} + +static int picolcd_fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) +{ + __u32 bpp = var->bits_per_pixel; + __u32 activate = var->activate; + + /* only allow 1/8 bit depth (8-bit is grayscale) */ + *var = picolcdfb_var; + var->activate = activate; + if (bpp >= 8) { + var->bits_per_pixel = 8; + var->red.length = 8; + var->green.length = 8; + var->blue.length = 8; + } else { + var->bits_per_pixel = 1; + var->red.length = 1; + var->green.length = 1; + var->blue.length = 1; + } + return 0; +} + +static int picolcd_set_par(struct fb_info *info) +{ + struct picolcd_fb_data *fbdata = info->par; + u8 *tmp_fb, *o_fb; + if (info->var.bits_per_pixel == fbdata->bpp) + return 0; + /* switch between 1/8 bit depths */ + if (info->var.bits_per_pixel != 1 && info->var.bits_per_pixel != 8) + return -EINVAL; + + o_fb = fbdata->bitmap; + tmp_fb = kmalloc(PICOLCDFB_SIZE*info->var.bits_per_pixel, GFP_KERNEL); + if (!tmp_fb) + return -ENOMEM; + + /* translate FB content to new bits-per-pixel */ + if (info->var.bits_per_pixel == 1) { + int i, b; + for (i = 0; i < PICOLCDFB_SIZE; i++) { + u8 p = 0; + for (b = 0; b < 8; b++) { + p <<= 1; + p |= o_fb[i*8+b] ? 0x01 : 0x00; + } + tmp_fb[i] = p; + } + memcpy(o_fb, tmp_fb, PICOLCDFB_SIZE); + info->fix.visual = FB_VISUAL_MONO01; + info->fix.line_length = PICOLCDFB_WIDTH / 8; + } else { + int i; + memcpy(tmp_fb, o_fb, PICOLCDFB_SIZE); + for (i = 0; i < PICOLCDFB_SIZE * 8; i++) + o_fb[i] = tmp_fb[i/8] & (0x01 << (7 - i % 8)) ? 0xff : 0x00; + info->fix.visual = FB_VISUAL_DIRECTCOLOR; + info->fix.line_length = PICOLCDFB_WIDTH; + } + + kfree(tmp_fb); + fbdata->bpp = info->var.bits_per_pixel; + return 0; +} + +/* Note this can't be const because of struct fb_info definition */ +static struct fb_ops picolcdfb_ops = { + .owner = THIS_MODULE, + .fb_destroy = picolcd_fb_destroy, + .fb_read = fb_sys_read, + .fb_write = picolcd_fb_write, + .fb_blank = picolcd_fb_blank, + .fb_fillrect = picolcd_fb_fillrect, + .fb_copyarea = picolcd_fb_copyarea, + .fb_imageblit = picolcd_fb_imageblit, + .fb_check_var = picolcd_fb_check_var, + .fb_set_par = picolcd_set_par, +}; + + +/* Callback from deferred IO workqueue */ +static void picolcd_fb_deferred_io(struct fb_info *info, struct list_head *pagelist) +{ + picolcd_fb_update(info); +} + +static const struct fb_deferred_io picolcd_fb_defio = { + .delay = HZ / PICOLCDFB_UPDATE_RATE_DEFAULT, + .deferred_io = picolcd_fb_deferred_io, +}; + + +/* + * The "fb_update_rate" sysfs attribute + */ +static ssize_t picolcd_fb_update_rate_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct picolcd_data *data = dev_get_drvdata(dev); + struct picolcd_fb_data *fbdata = data->fb_info->par; + unsigned i, fb_update_rate = fbdata->update_rate; + size_t ret = 0; + + for (i = 1; i <= PICOLCDFB_UPDATE_RATE_LIMIT; i++) + if (ret >= PAGE_SIZE) + break; + else if (i == fb_update_rate) + ret += snprintf(buf+ret, PAGE_SIZE-ret, "[%u] ", i); + else + ret += snprintf(buf+ret, PAGE_SIZE-ret, "%u ", i); + if (ret > 0) + buf[min(ret, (size_t)PAGE_SIZE)-1] = '\n'; + return ret; +} + +static ssize_t picolcd_fb_update_rate_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct picolcd_data *data = dev_get_drvdata(dev); + struct picolcd_fb_data *fbdata = data->fb_info->par; + int i; + unsigned u; + + if (count < 1 || count > 10) + return -EINVAL; + + i = sscanf(buf, "%u", &u); + if (i != 1) + return -EINVAL; + + if (u > PICOLCDFB_UPDATE_RATE_LIMIT) + return -ERANGE; + else if (u == 0) + u = PICOLCDFB_UPDATE_RATE_DEFAULT; + + fbdata->update_rate = u; + data->fb_info->fbdefio->delay = HZ / fbdata->update_rate; + return count; +} + +static DEVICE_ATTR(fb_update_rate, 0666, picolcd_fb_update_rate_show, + picolcd_fb_update_rate_store); + +/* initialize Framebuffer device */ +int picolcd_init_framebuffer(struct picolcd_data *data) +{ + struct device *dev = &data->hdev->dev; + struct fb_info *info = NULL; + struct picolcd_fb_data *fbdata = NULL; + int i, error = -ENOMEM; + u32 *palette; + + /* The extra memory is: + * - 256*u32 for pseudo_palette + * - struct fb_deferred_io + */ + info = framebuffer_alloc(256 * sizeof(u32) + + sizeof(struct fb_deferred_io) + + sizeof(struct picolcd_fb_data) + + PICOLCDFB_SIZE, dev); + if (info == NULL) { + dev_err(dev, "failed to allocate a framebuffer\n"); + goto err_nomem; + } + + info->fbdefio = info->par; + *info->fbdefio = picolcd_fb_defio; + info->par += sizeof(struct fb_deferred_io); + palette = info->par; + info->par += 256 * sizeof(u32); + for (i = 0; i < 256; i++) + palette[i] = i > 0 && i < 16 ? 0xff : 0; + info->pseudo_palette = palette; + info->fbops = &picolcdfb_ops; + info->var = picolcdfb_var; + info->fix = picolcdfb_fix; + info->fix.smem_len = PICOLCDFB_SIZE*8; + info->flags = FBINFO_FLAG_DEFAULT; + + fbdata = info->par; + spin_lock_init(&fbdata->lock); + fbdata->picolcd = data; + fbdata->update_rate = PICOLCDFB_UPDATE_RATE_DEFAULT; + fbdata->bpp = picolcdfb_var.bits_per_pixel; + fbdata->force = 1; + fbdata->vbitmap = info->par + sizeof(struct picolcd_fb_data); + fbdata->bitmap = vmalloc(PICOLCDFB_SIZE*8); + if (fbdata->bitmap == NULL) { + dev_err(dev, "can't get a free page for framebuffer\n"); + goto err_nomem; + } + info->screen_base = (char __force __iomem *)fbdata->bitmap; + info->fix.smem_start = (unsigned long)fbdata->bitmap; + memset(fbdata->vbitmap, 0xff, PICOLCDFB_SIZE); + data->fb_info = info; + + error = picolcd_fb_reset(data, 1); + if (error) { + dev_err(dev, "failed to configure display\n"); + goto err_cleanup; + } + + error = device_create_file(dev, &dev_attr_fb_update_rate); + if (error) { + dev_err(dev, "failed to create sysfs attributes\n"); + goto err_cleanup; + } + + fb_deferred_io_init(info); + error = register_framebuffer(info); + if (error) { + dev_err(dev, "failed to register framebuffer\n"); + goto err_sysfs; + } + return 0; + +err_sysfs: + device_remove_file(dev, &dev_attr_fb_update_rate); + fb_deferred_io_cleanup(info); +err_cleanup: + data->fb_info = NULL; + +err_nomem: + if (fbdata) + vfree(fbdata->bitmap); + framebuffer_release(info); + return error; +} + +void picolcd_exit_framebuffer(struct picolcd_data *data) +{ + struct fb_info *info = data->fb_info; + struct picolcd_fb_data *fbdata = info->par; + unsigned long flags; + + device_remove_file(&data->hdev->dev, &dev_attr_fb_update_rate); + + /* disconnect framebuffer from HID dev */ + spin_lock_irqsave(&fbdata->lock, flags); + fbdata->picolcd = NULL; + spin_unlock_irqrestore(&fbdata->lock, flags); + + /* make sure there is no running update - thus that fbdata->picolcd + * once obtained under lock is guaranteed not to get free() under + * the feet of the deferred work */ + flush_delayed_work_sync(&info->deferred_work); + + data->fb_info = NULL; + unregister_framebuffer(info); +} diff --git a/drivers/hid/hid-picolcd_lcd.c b/drivers/hid/hid-picolcd_lcd.c new file mode 100644 index 00000000000..2d0ddc5ac65 --- /dev/null +++ b/drivers/hid/hid-picolcd_lcd.c @@ -0,0 +1,107 @@ +/*************************************************************************** + * Copyright (C) 2010-2012 by Bruno Prémont <bonbons@linux-vserver.org> * + * * + * Based on Logitech G13 driver (v0.4) * + * Copyright (C) 2009 by Rick L. Vinyard, Jr. <rvinyard@cs.nmsu.edu> * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, version 2 of the License. * + * * + * This driver is distributed in the hope that it will be useful, but * + * WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * + * General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this software. If not see <http://www.gnu.org/licenses/>. * + ***************************************************************************/ + +#include <linux/hid.h> +#include "usbhid/usbhid.h" +#include <linux/usb.h> + +#include <linux/fb.h> +#include <linux/lcd.h> + +#include "hid-picolcd.h" + +/* + * lcd class device + */ +static int picolcd_get_contrast(struct lcd_device *ldev) +{ + struct picolcd_data *data = lcd_get_data(ldev); + return data->lcd_contrast; +} + +static int picolcd_set_contrast(struct lcd_device *ldev, int contrast) +{ + struct picolcd_data *data = lcd_get_data(ldev); + struct hid_report *report = picolcd_out_report(REPORT_CONTRAST, data->hdev); + unsigned long flags; + + if (!report || report->maxfield != 1 || report->field[0]->report_count != 1) + return -ENODEV; + + data->lcd_contrast = contrast & 0x0ff; + spin_lock_irqsave(&data->lock, flags); + hid_set_field(report->field[0], 0, data->lcd_contrast); + if (!(data->status & PICOLCD_FAILED)) + usbhid_submit_report(data->hdev, report, USB_DIR_OUT); + spin_unlock_irqrestore(&data->lock, flags); + return 0; +} + +static int picolcd_check_lcd_fb(struct lcd_device *ldev, struct fb_info *fb) +{ + return fb && fb == picolcd_fbinfo((struct picolcd_data *)lcd_get_data(ldev)); +} + +static struct lcd_ops picolcd_lcdops = { + .get_contrast = picolcd_get_contrast, + .set_contrast = picolcd_set_contrast, + .check_fb = picolcd_check_lcd_fb, +}; + +int picolcd_init_lcd(struct picolcd_data *data, struct hid_report *report) +{ + struct device *dev = &data->hdev->dev; + struct lcd_device *ldev; + + if (!report) + return -ENODEV; + if (report->maxfield != 1 || report->field[0]->report_count != 1 || + report->field[0]->report_size != 8) { + dev_err(dev, "unsupported CONTRAST report"); + return -EINVAL; + } + + ldev = lcd_device_register(dev_name(dev), dev, data, &picolcd_lcdops); + if (IS_ERR(ldev)) { + dev_err(dev, "failed to register LCD\n"); + return PTR_ERR(ldev); + } + ldev->props.max_contrast = 0x0ff; + data->lcd_contrast = 0xe5; + data->lcd = ldev; + picolcd_set_contrast(ldev, 0xe5); + return 0; +} + +void picolcd_exit_lcd(struct picolcd_data *data) +{ + struct lcd_device *ldev = data->lcd; + + data->lcd = NULL; + if (ldev) + lcd_device_unregister(ldev); +} + +int picolcd_resume_lcd(struct picolcd_data *data) +{ + if (!data->lcd) + return 0; + return picolcd_set_contrast(data->lcd, data->lcd_contrast); +} + diff --git a/drivers/hid/hid-picolcd_leds.c b/drivers/hid/hid-picolcd_leds.c new file mode 100644 index 00000000000..28cb6a4f963 --- /dev/null +++ b/drivers/hid/hid-picolcd_leds.c @@ -0,0 +1,175 @@ +/*************************************************************************** + * Copyright (C) 2010-2012 by Bruno Prémont <bonbons@linux-vserver.org> * + * * + * Based on Logitech G13 driver (v0.4) * + * Copyright (C) 2009 by Rick L. Vinyard, Jr. <rvinyard@cs.nmsu.edu> * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, version 2 of the License. * + * * + * This driver is distributed in the hope that it will be useful, but * + * WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * + * General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this software. If not see <http://www.gnu.org/licenses/>. * + ***************************************************************************/ + +#include <linux/hid.h> +#include <linux/hid-debug.h> +#include <linux/input.h> +#include "hid-ids.h" +#include "usbhid/usbhid.h" +#include <linux/usb.h> + +#include <linux/fb.h> +#include <linux/vmalloc.h> +#include <linux/backlight.h> +#include <linux/lcd.h> + +#include <linux/leds.h> + +#include <linux/seq_file.h> +#include <linux/debugfs.h> + +#include <linux/completion.h> +#include <linux/uaccess.h> +#include <linux/module.h> + +#include "hid-picolcd.h" + + +void picolcd_leds_set(struct picolcd_data *data) +{ + struct hid_report *report; + unsigned long flags; + + if (!data->led[0]) + return; + report = picolcd_out_report(REPORT_LED_STATE, data->hdev); + if (!report || report->maxfield != 1 || report->field[0]->report_count != 1) + return; + + spin_lock_irqsave(&data->lock, flags); + hid_set_field(report->field[0], 0, data->led_state); + if (!(data->status & PICOLCD_FAILED)) + usbhid_submit_report(data->hdev, report, USB_DIR_OUT); + spin_unlock_irqrestore(&data->lock, flags); +} + +static void picolcd_led_set_brightness(struct led_classdev *led_cdev, + enum led_brightness value) +{ + struct device *dev; + struct hid_device *hdev; + struct picolcd_data *data; + int i, state = 0; + + dev = led_cdev->dev->parent; + hdev = container_of(dev, struct hid_device, dev); + data = hid_get_drvdata(hdev); + if (!data) + return; + for (i = 0; i < 8; i++) { + if (led_cdev != data->led[i]) + continue; + state = (data->led_state >> i) & 1; + if (value == LED_OFF && state) { + data->led_state &= ~(1 << i); + picolcd_leds_set(data); + } else if (value != LED_OFF && !state) { + data->led_state |= 1 << i; + picolcd_leds_set(data); + } + break; + } +} + +static enum led_brightness picolcd_led_get_brightness(struct led_classdev *led_cdev) +{ + struct device *dev; + struct hid_device *hdev; + struct picolcd_data *data; + int i, value = 0; + + dev = led_cdev->dev->parent; + hdev = container_of(dev, struct hid_device, dev); + data = hid_get_drvdata(hdev); + for (i = 0; i < 8; i++) + if (led_cdev == data->led[i]) { + value = (data->led_state >> i) & 1; + break; + } + return value ? LED_FULL : LED_OFF; +} + +int picolcd_init_leds(struct picolcd_data *data, struct hid_report *report) +{ + struct device *dev = &data->hdev->dev; + struct led_classdev *led; + size_t name_sz = strlen(dev_name(dev)) + 8; + char *name; + int i, ret = 0; + + if (!report) + return -ENODEV; + if (report->maxfield != 1 || report->field[0]->report_count != 1 || + report->field[0]->report_size != 8) { + dev_err(dev, "unsupported LED_STATE report"); + return -EINVAL; + } + + for (i = 0; i < 8; i++) { + led = kzalloc(sizeof(struct led_classdev)+name_sz, GFP_KERNEL); + if (!led) { + dev_err(dev, "can't allocate memory for LED %d\n", i); + ret = -ENOMEM; + goto err; + } + name = (void *)(&led[1]); + snprintf(name, name_sz, "%s::GPO%d", dev_name(dev), i); + led->name = name; + led->brightness = 0; + led->max_brightness = 1; + led->brightness_get = picolcd_led_get_brightness; + led->brightness_set = picolcd_led_set_brightness; + + data->led[i] = led; + ret = led_classdev_register(dev, data->led[i]); + if (ret) { + data->led[i] = NULL; + kfree(led); + dev_err(dev, "can't register LED %d\n", i); + goto err; + } + } + return 0; +err: + for (i = 0; i < 8; i++) + if (data->led[i]) { + led = data->led[i]; + data->led[i] = NULL; + led_classdev_unregister(led); + kfree(led); + } + return ret; +} + +void picolcd_exit_leds(struct picolcd_data *data) +{ + struct led_classdev *led; + int i; + + for (i = 0; i < 8; i++) { + led = data->led[i]; + data->led[i] = NULL; + if (!led) + continue; + led_classdev_unregister(led); + kfree(led); + } +} + + diff --git a/drivers/hid/hid-primax.c b/drivers/hid/hid-primax.c index 4d3c60d8831..c15adb0c98a 100644 --- a/drivers/hid/hid-primax.c +++ b/drivers/hid/hid-primax.c @@ -64,29 +64,6 @@ static int px_raw_event(struct hid_device *hid, struct hid_report *report, return 0; } -static int px_probe(struct hid_device *hid, const struct hid_device_id *id) -{ - int ret; - - ret = hid_parse(hid); - if (ret) { - hid_err(hid, "parse failed\n"); - goto fail; - } - - ret = hid_hw_start(hid, HID_CONNECT_DEFAULT); - if (ret) - hid_err(hid, "hw start failed\n"); - -fail: - return ret; -} - -static void px_remove(struct hid_device *hid) -{ - hid_hw_stop(hid); -} - static const struct hid_device_id px_devices[] = { { HID_USB_DEVICE(USB_VENDOR_ID_PRIMAX, USB_DEVICE_ID_PRIMAX_KEYBOARD) }, { } @@ -97,8 +74,6 @@ static struct hid_driver px_driver = { .name = "primax", .id_table = px_devices, .raw_event = px_raw_event, - .probe = px_probe, - .remove = px_remove, }; static int __init px_init(void) diff --git a/drivers/hid/hid-prodikeys.c b/drivers/hid/hid-prodikeys.c index b71b77ab0dc..ec8ca333631 100644 --- a/drivers/hid/hid-prodikeys.c +++ b/drivers/hid/hid-prodikeys.c @@ -105,7 +105,7 @@ static ssize_t show_channel(struct device *dev, struct device_attribute *attr, char *buf) { struct hid_device *hdev = container_of(dev, struct hid_device, dev); - struct pk_device *pk = (struct pk_device *)hid_get_drvdata(hdev); + struct pk_device *pk = hid_get_drvdata(hdev); dbg_hid("pcmidi sysfs read channel=%u\n", pk->pm->midi_channel); @@ -118,7 +118,7 @@ static ssize_t store_channel(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct hid_device *hdev = container_of(dev, struct hid_device, dev); - struct pk_device *pk = (struct pk_device *)hid_get_drvdata(hdev); + struct pk_device *pk = hid_get_drvdata(hdev); unsigned channel = 0; @@ -142,7 +142,7 @@ static ssize_t show_sustain(struct device *dev, struct device_attribute *attr, char *buf) { struct hid_device *hdev = container_of(dev, struct hid_device, dev); - struct pk_device *pk = (struct pk_device *)hid_get_drvdata(hdev); + struct pk_device *pk = hid_get_drvdata(hdev); dbg_hid("pcmidi sysfs read sustain=%u\n", pk->pm->midi_sustain); @@ -155,7 +155,7 @@ static ssize_t store_sustain(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct hid_device *hdev = container_of(dev, struct hid_device, dev); - struct pk_device *pk = (struct pk_device *)hid_get_drvdata(hdev); + struct pk_device *pk = hid_get_drvdata(hdev); unsigned sustain = 0; @@ -181,7 +181,7 @@ static ssize_t show_octave(struct device *dev, struct device_attribute *attr, char *buf) { struct hid_device *hdev = container_of(dev, struct hid_device, dev); - struct pk_device *pk = (struct pk_device *)hid_get_drvdata(hdev); + struct pk_device *pk = hid_get_drvdata(hdev); dbg_hid("pcmidi sysfs read octave=%d\n", pk->pm->midi_octave); @@ -194,7 +194,7 @@ static ssize_t store_octave(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct hid_device *hdev = container_of(dev, struct hid_device, dev); - struct pk_device *pk = (struct pk_device *)hid_get_drvdata(hdev); + struct pk_device *pk = hid_get_drvdata(hdev); int octave = 0; @@ -759,7 +759,7 @@ static int pk_input_mapping(struct hid_device *hdev, struct hid_input *hi, struct hid_field *field, struct hid_usage *usage, unsigned long **bit, int *max) { - struct pk_device *pk = (struct pk_device *)hid_get_drvdata(hdev); + struct pk_device *pk = hid_get_drvdata(hdev); struct pcmidi_snd *pm; pm = pk->pm; @@ -777,7 +777,7 @@ static int pk_input_mapping(struct hid_device *hdev, struct hid_input *hi, static int pk_raw_event(struct hid_device *hdev, struct hid_report *report, u8 *data, int size) { - struct pk_device *pk = (struct pk_device *)hid_get_drvdata(hdev); + struct pk_device *pk = hid_get_drvdata(hdev); int ret = 0; if (1 == pk->pm->ifnum) { @@ -858,7 +858,7 @@ err_free_pk: static void pk_remove(struct hid_device *hdev) { - struct pk_device *pk = (struct pk_device *)hid_get_drvdata(hdev); + struct pk_device *pk = hid_get_drvdata(hdev); struct pcmidi_snd *pm; pm = pk->pm; diff --git a/drivers/hid/hid-ps3remote.c b/drivers/hid/hid-ps3remote.c new file mode 100644 index 00000000000..03811e539d7 --- /dev/null +++ b/drivers/hid/hid-ps3remote.c @@ -0,0 +1,215 @@ +/* + * HID driver for Sony PS3 BD Remote Control + * + * Copyright (c) 2012 David Dillow <dave@thedillows.org> + * Based on a blend of the bluez fakehid user-space code by Marcel Holtmann + * and other kernel HID drivers. + */ + +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + */ + +/* NOTE: in order for the Sony PS3 BD Remote Control to be found by + * a Bluetooth host, the key combination Start+Enter has to be kept pressed + * for about 7 seconds with the Bluetooth Host Controller in discovering mode. + * + * There will be no PIN request from the device. + */ + +#include <linux/device.h> +#include <linux/hid.h> +#include <linux/module.h> + +#include "hid-ids.h" + +static __u8 ps3remote_rdesc[] = { + 0x05, 0x01, /* GUsagePage Generic Desktop */ + 0x09, 0x05, /* LUsage 0x05 [Game Pad] */ + 0xA1, 0x01, /* MCollection Application (mouse, keyboard) */ + + /* Use collection 1 for joypad buttons */ + 0xA1, 0x02, /* MCollection Logical (interrelated data) */ + + /* Ignore the 1st byte, maybe it is used for a controller + * number but it's not needed for correct operation */ + 0x75, 0x08, /* GReportSize 0x08 [8] */ + 0x95, 0x01, /* GReportCount 0x01 [1] */ + 0x81, 0x01, /* MInput 0x01 (Const[0] Arr[1] Abs[2]) */ + + /* Bytes from 2nd to 4th are a bitmap for joypad buttons, for these + * buttons multiple keypresses are allowed */ + 0x05, 0x09, /* GUsagePage Button */ + 0x19, 0x01, /* LUsageMinimum 0x01 [Button 1 (primary/trigger)] */ + 0x29, 0x18, /* LUsageMaximum 0x18 [Button 24] */ + 0x14, /* GLogicalMinimum [0] */ + 0x25, 0x01, /* GLogicalMaximum 0x01 [1] */ + 0x75, 0x01, /* GReportSize 0x01 [1] */ + 0x95, 0x18, /* GReportCount 0x18 [24] */ + 0x81, 0x02, /* MInput 0x02 (Data[0] Var[1] Abs[2]) */ + + 0xC0, /* MEndCollection */ + + /* Use collection 2 for remote control buttons */ + 0xA1, 0x02, /* MCollection Logical (interrelated data) */ + + /* 5th byte is used for remote control buttons */ + 0x05, 0x09, /* GUsagePage Button */ + 0x18, /* LUsageMinimum [No button pressed] */ + 0x29, 0xFE, /* LUsageMaximum 0xFE [Button 254] */ + 0x14, /* GLogicalMinimum [0] */ + 0x26, 0xFE, 0x00, /* GLogicalMaximum 0x00FE [254] */ + 0x75, 0x08, /* GReportSize 0x08 [8] */ + 0x95, 0x01, /* GReportCount 0x01 [1] */ + 0x80, /* MInput */ + + /* Ignore bytes from 6th to 11th, 6th to 10th are always constant at + * 0xff and 11th is for press indication */ + 0x75, 0x08, /* GReportSize 0x08 [8] */ + 0x95, 0x06, /* GReportCount 0x06 [6] */ + 0x81, 0x01, /* MInput 0x01 (Const[0] Arr[1] Abs[2]) */ + + /* 12th byte is for battery strength */ + 0x05, 0x06, /* GUsagePage Generic Device Controls */ + 0x09, 0x20, /* LUsage 0x20 [Battery Strength] */ + 0x14, /* GLogicalMinimum [0] */ + 0x25, 0x05, /* GLogicalMaximum 0x05 [5] */ + 0x75, 0x08, /* GReportSize 0x08 [8] */ + 0x95, 0x01, /* GReportCount 0x01 [1] */ + 0x81, 0x02, /* MInput 0x02 (Data[0] Var[1] Abs[2]) */ + + 0xC0, /* MEndCollection */ + + 0xC0 /* MEndCollection [Game Pad] */ +}; + +static const unsigned int ps3remote_keymap_joypad_buttons[] = { + [0x01] = KEY_SELECT, + [0x02] = BTN_THUMBL, /* L3 */ + [0x03] = BTN_THUMBR, /* R3 */ + [0x04] = BTN_START, + [0x05] = KEY_UP, + [0x06] = KEY_RIGHT, + [0x07] = KEY_DOWN, + [0x08] = KEY_LEFT, + [0x09] = BTN_TL2, /* L2 */ + [0x0a] = BTN_TR2, /* R2 */ + [0x0b] = BTN_TL, /* L1 */ + [0x0c] = BTN_TR, /* R1 */ + [0x0d] = KEY_OPTION, /* options/triangle */ + [0x0e] = KEY_BACK, /* back/circle */ + [0x0f] = BTN_0, /* cross */ + [0x10] = KEY_SCREEN, /* view/square */ + [0x11] = KEY_HOMEPAGE, /* PS button */ + [0x14] = KEY_ENTER, +}; +static const unsigned int ps3remote_keymap_remote_buttons[] = { + [0x00] = KEY_1, + [0x01] = KEY_2, + [0x02] = KEY_3, + [0x03] = KEY_4, + [0x04] = KEY_5, + [0x05] = KEY_6, + [0x06] = KEY_7, + [0x07] = KEY_8, + [0x08] = KEY_9, + [0x09] = KEY_0, + [0x0e] = KEY_ESC, /* return */ + [0x0f] = KEY_CLEAR, + [0x16] = KEY_EJECTCD, + [0x1a] = KEY_MENU, /* top menu */ + [0x28] = KEY_TIME, + [0x30] = KEY_PREVIOUS, + [0x31] = KEY_NEXT, + [0x32] = KEY_PLAY, + [0x33] = KEY_REWIND, /* scan back */ + [0x34] = KEY_FORWARD, /* scan forward */ + [0x38] = KEY_STOP, + [0x39] = KEY_PAUSE, + [0x40] = KEY_CONTEXT_MENU, /* pop up/menu */ + [0x60] = KEY_FRAMEBACK, /* slow/step back */ + [0x61] = KEY_FRAMEFORWARD, /* slow/step forward */ + [0x63] = KEY_SUBTITLE, + [0x64] = KEY_AUDIO, + [0x65] = KEY_ANGLE, + [0x70] = KEY_INFO, /* display */ + [0x80] = KEY_BLUE, + [0x81] = KEY_RED, + [0x82] = KEY_GREEN, + [0x83] = KEY_YELLOW, +}; + +static __u8 *ps3remote_fixup(struct hid_device *hdev, __u8 *rdesc, + unsigned int *rsize) +{ + *rsize = sizeof(ps3remote_rdesc); + return ps3remote_rdesc; +} + +static int ps3remote_mapping(struct hid_device *hdev, struct hid_input *hi, + struct hid_field *field, struct hid_usage *usage, + unsigned long **bit, int *max) +{ + unsigned int key = usage->hid & HID_USAGE; + + if ((usage->hid & HID_USAGE_PAGE) != HID_UP_BUTTON) + return -1; + + switch (usage->collection_index) { + case 1: + if (key >= ARRAY_SIZE(ps3remote_keymap_joypad_buttons)) + return -1; + + key = ps3remote_keymap_joypad_buttons[key]; + if (!key) + return -1; + break; + case 2: + if (key >= ARRAY_SIZE(ps3remote_keymap_remote_buttons)) + return -1; + + key = ps3remote_keymap_remote_buttons[key]; + if (!key) + return -1; + break; + default: + return -1; + } + + hid_map_usage_clear(hi, usage, bit, max, EV_KEY, key); + return 1; +} + +static const struct hid_device_id ps3remote_devices[] = { + /* PS3 BD Remote Control */ + { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_BDREMOTE) }, + /* Logitech Harmony Adapter for PS3 */ + { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_PS3) }, + { } +}; +MODULE_DEVICE_TABLE(hid, ps3remote_devices); + +static struct hid_driver ps3remote_driver = { + .name = "ps3_remote", + .id_table = ps3remote_devices, + .report_fixup = ps3remote_fixup, + .input_mapping = ps3remote_mapping, +}; + +static int __init ps3remote_init(void) +{ + return hid_register_driver(&ps3remote_driver); +} + +static void __exit ps3remote_exit(void) +{ + hid_unregister_driver(&ps3remote_driver); +} + +module_init(ps3remote_init); +module_exit(ps3remote_exit); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("David Dillow <dave@thedillows.org>, Antonio Ospite <ospite@studenti.unina.it>"); diff --git a/drivers/hid/hid-samsung.c b/drivers/hid/hid-samsung.c index 3c1fd8af5e0..a5821d31722 100644 --- a/drivers/hid/hid-samsung.c +++ b/drivers/hid/hid-samsung.c @@ -5,7 +5,6 @@ * Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@suse.cz> * Copyright (c) 2005 Michael Haboustak <mike-@cinci.rr.com> for Concept2, Inc * Copyright (c) 2006-2007 Jiri Kosina - * Copyright (c) 2007 Paul Walmsley * Copyright (c) 2008 Jiri Slaby * Copyright (c) 2010 Don Prince <dhprince.devel@yahoo.co.uk> * diff --git a/drivers/hid/hid-sony.c b/drivers/hid/hid-sony.c index 5cd25bd907f..7f33ebf299c 100644 --- a/drivers/hid/hid-sony.c +++ b/drivers/hid/hid-sony.c @@ -4,7 +4,6 @@ * Copyright (c) 1999 Andreas Gal * Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@suse.cz> * Copyright (c) 2005 Michael Haboustak <mike-@cinci.rr.com> for Concept2, Inc - * Copyright (c) 2007 Paul Walmsley * Copyright (c) 2008 Jiri Slaby * Copyright (c) 2006-2008 Jiri Kosina */ diff --git a/drivers/hid/hid-sunplus.c b/drivers/hid/hid-sunplus.c index d484a0043dd..45b4b066a26 100644 --- a/drivers/hid/hid-sunplus.c +++ b/drivers/hid/hid-sunplus.c @@ -5,7 +5,6 @@ * Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@suse.cz> * Copyright (c) 2005 Michael Haboustak <mike-@cinci.rr.com> for Concept2, Inc * Copyright (c) 2006-2007 Jiri Kosina - * Copyright (c) 2007 Paul Walmsley * Copyright (c) 2008 Jiri Slaby */ diff --git a/drivers/hid/hid-uclogic.c b/drivers/hid/hid-uclogic.c index 3aba02be1f2..2e56a1fd237 100644 --- a/drivers/hid/hid-uclogic.c +++ b/drivers/hid/hid-uclogic.c @@ -466,6 +466,86 @@ static __u8 twhl850_rdesc_fixed2[] = { 0xC0 /* End Collection */ }; +/* + * See TWHA60 description, device and HID report descriptors at + * http://sf.net/apps/mediawiki/digimend/?title=UC-Logic_Tablet_TWHA60 + */ + +/* Size of the original descriptors of TWHA60 tablet */ +#define TWHA60_RDESC_ORIG_SIZE0 254 +#define TWHA60_RDESC_ORIG_SIZE1 139 + +/* Fixed TWHA60 report descriptor, interface 0 (stylus) */ +static __u8 twha60_rdesc_fixed0[] = { + 0x05, 0x0D, /* Usage Page (Digitizer), */ + 0x09, 0x02, /* Usage (Pen), */ + 0xA1, 0x01, /* Collection (Application), */ + 0x85, 0x09, /* Report ID (9), */ + 0x09, 0x20, /* Usage (Stylus), */ + 0xA0, /* Collection (Physical), */ + 0x75, 0x01, /* Report Size (1), */ + 0x09, 0x42, /* Usage (Tip Switch), */ + 0x09, 0x44, /* Usage (Barrel Switch), */ + 0x09, 0x46, /* Usage (Tablet Pick), */ + 0x14, /* Logical Minimum (0), */ + 0x25, 0x01, /* Logical Maximum (1), */ + 0x95, 0x03, /* Report Count (3), */ + 0x81, 0x02, /* Input (Variable), */ + 0x95, 0x04, /* Report Count (4), */ + 0x81, 0x01, /* Input (Constant), */ + 0x09, 0x32, /* Usage (In Range), */ + 0x95, 0x01, /* Report Count (1), */ + 0x81, 0x02, /* Input (Variable), */ + 0x75, 0x10, /* Report Size (16), */ + 0x95, 0x01, /* Report Count (1), */ + 0x14, /* Logical Minimum (0), */ + 0xA4, /* Push, */ + 0x05, 0x01, /* Usage Page (Desktop), */ + 0x55, 0xFD, /* Unit Exponent (-3), */ + 0x65, 0x13, /* Unit (Inch), */ + 0x34, /* Physical Minimum (0), */ + 0x09, 0x30, /* Usage (X), */ + 0x46, 0x10, 0x27, /* Physical Maximum (10000), */ + 0x27, 0x3F, 0x9C, + 0x00, 0x00, /* Logical Maximum (39999), */ + 0x81, 0x02, /* Input (Variable), */ + 0x09, 0x31, /* Usage (Y), */ + 0x46, 0x6A, 0x18, /* Physical Maximum (6250), */ + 0x26, 0xA7, 0x61, /* Logical Maximum (24999), */ + 0x81, 0x02, /* Input (Variable), */ + 0xB4, /* Pop, */ + 0x09, 0x30, /* Usage (Tip Pressure), */ + 0x26, 0xFF, 0x03, /* Logical Maximum (1023), */ + 0x81, 0x02, /* Input (Variable), */ + 0xC0, /* End Collection, */ + 0xC0 /* End Collection */ +}; + +/* Fixed TWHA60 report descriptor, interface 1 (frame buttons) */ +static __u8 twha60_rdesc_fixed1[] = { + 0x05, 0x01, /* Usage Page (Desktop), */ + 0x09, 0x06, /* Usage (Keyboard), */ + 0xA1, 0x01, /* Collection (Application), */ + 0x85, 0x05, /* Report ID (5), */ + 0x05, 0x07, /* Usage Page (Keyboard), */ + 0x14, /* Logical Minimum (0), */ + 0x25, 0x01, /* Logical Maximum (1), */ + 0x75, 0x01, /* Report Size (1), */ + 0x95, 0x08, /* Report Count (8), */ + 0x81, 0x01, /* Input (Constant), */ + 0x95, 0x0C, /* Report Count (12), */ + 0x19, 0x3A, /* Usage Minimum (KB F1), */ + 0x29, 0x45, /* Usage Maximum (KB F12), */ + 0x81, 0x02, /* Input (Variable), */ + 0x95, 0x0C, /* Report Count (12), */ + 0x19, 0x68, /* Usage Minimum (KB F13), */ + 0x29, 0x73, /* Usage Maximum (KB F24), */ + 0x81, 0x02, /* Input (Variable), */ + 0x95, 0x08, /* Report Count (8), */ + 0x81, 0x01, /* Input (Constant), */ + 0xC0 /* End Collection */ +}; + static __u8 *uclogic_report_fixup(struct hid_device *hdev, __u8 *rdesc, unsigned int *rsize) { @@ -525,6 +605,22 @@ static __u8 *uclogic_report_fixup(struct hid_device *hdev, __u8 *rdesc, break; } break; + case USB_DEVICE_ID_UCLOGIC_TABLET_TWHA60: + switch (iface_num) { + case 0: + if (*rsize == TWHA60_RDESC_ORIG_SIZE0) { + rdesc = twha60_rdesc_fixed0; + *rsize = sizeof(twha60_rdesc_fixed0); + } + break; + case 1: + if (*rsize == TWHA60_RDESC_ORIG_SIZE1) { + rdesc = twha60_rdesc_fixed1; + *rsize = sizeof(twha60_rdesc_fixed1); + } + break; + } + break; } return rdesc; @@ -543,6 +639,8 @@ static const struct hid_device_id uclogic_devices[] = { USB_DEVICE_ID_UCLOGIC_TABLET_WP1062) }, { HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_WIRELESS_TABLET_TWHL850) }, + { HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, + USB_DEVICE_ID_UCLOGIC_TABLET_TWHA60) }, { } }; MODULE_DEVICE_TABLE(hid, uclogic_devices); diff --git a/drivers/hid/hid-wacom.c b/drivers/hid/hid-wacom.c index fe23a1eb586..2f60da9ed06 100644 --- a/drivers/hid/hid-wacom.c +++ b/drivers/hid/hid-wacom.c @@ -5,7 +5,6 @@ * Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@suse.cz> * Copyright (c) 2005 Michael Haboustak <mike-@cinci.rr.com> for Concept2, Inc * Copyright (c) 2006-2007 Jiri Kosina - * Copyright (c) 2007 Paul Walmsley * Copyright (c) 2008 Jiri Slaby <jirislaby@gmail.com> * Copyright (c) 2006 Andrew Zabolotny <zap@homelink.ru> * Copyright (c) 2009 Bastien Nocera <hadess@hadess.net> @@ -33,6 +32,8 @@ #define PAD_DEVICE_ID 0x0F #define WAC_CMD_LED_CONTROL 0x20 +#define WAC_CMD_ICON_START_STOP 0x21 +#define WAC_CMD_ICON_TRANSFER 0x26 struct wacom_data { __u16 tool; @@ -69,6 +70,91 @@ static enum power_supply_property wacom_ac_props[] = { POWER_SUPPLY_PROP_SCOPE, }; +static void wacom_scramble(__u8 *image) +{ + __u16 mask; + __u16 s1; + __u16 s2; + __u16 r1 ; + __u16 r2 ; + __u16 r; + __u8 buf[256]; + int i, w, x, y, z; + + for (x = 0; x < 32; x++) { + for (y = 0; y < 8; y++) + buf[(8 * x) + (7 - y)] = image[(8 * x) + y]; + } + + /* Change 76543210 into GECA6420 as required by Intuos4 WL + * HGFEDCBA HFDB7531 + */ + for (x = 0; x < 4; x++) { + for (y = 0; y < 4; y++) { + for (z = 0; z < 8; z++) { + mask = 0x0001; + r1 = 0; + r2 = 0; + i = (x << 6) + (y << 4) + z; + s1 = buf[i]; + s2 = buf[i+8]; + for (w = 0; w < 8; w++) { + r1 |= (s1 & mask); + r2 |= (s2 & mask); + s1 <<= 1; + s2 <<= 1; + mask <<= 2; + } + r = r1 | (r2 << 1); + i = (x << 6) + (y << 4) + (z << 1); + image[i] = 0xFF & r; + image[i+1] = (0xFF00 & r) >> 8; + } + } + } +} + +static void wacom_set_image(struct hid_device *hdev, const char *image, + __u8 icon_no) +{ + __u8 rep_data[68]; + __u8 p[256]; + int ret, i, j; + + for (i = 0; i < 256; i++) + p[i] = image[i]; + + rep_data[0] = WAC_CMD_ICON_START_STOP; + rep_data[1] = 0; + ret = hdev->hid_output_raw_report(hdev, rep_data, 2, + HID_FEATURE_REPORT); + if (ret < 0) + goto err; + + rep_data[0] = WAC_CMD_ICON_TRANSFER; + rep_data[1] = icon_no & 0x07; + + wacom_scramble(p); + + for (i = 0; i < 4; i++) { + for (j = 0; j < 64; j++) + rep_data[j + 3] = p[(i << 6) + j]; + + rep_data[2] = i; + ret = hdev->hid_output_raw_report(hdev, rep_data, 67, + HID_FEATURE_REPORT); + } + + rep_data[0] = WAC_CMD_ICON_START_STOP; + rep_data[1] = 0; + + ret = hdev->hid_output_raw_report(hdev, rep_data, 2, + HID_FEATURE_REPORT); + +err: + return; +} + static void wacom_leds_set_brightness(struct led_classdev *led_dev, enum led_brightness value) { @@ -91,7 +177,10 @@ static void wacom_leds_set_brightness(struct led_classdev *led_dev, if (buf) { buf[0] = WAC_CMD_LED_CONTROL; buf[1] = led; - buf[2] = value; + buf[2] = value >> 2; + buf[3] = value; + /* use fixed brightness for OLEDs */ + buf[4] = 0x08; hdev->hid_output_raw_report(hdev, buf, 9, HID_FEATURE_REPORT); kfree(buf); } @@ -317,6 +406,34 @@ static ssize_t wacom_store_speed(struct device *dev, static DEVICE_ATTR(speed, S_IRUGO | S_IWUSR | S_IWGRP, wacom_show_speed, wacom_store_speed); +#define WACOM_STORE(OLED_ID) \ +static ssize_t wacom_oled##OLED_ID##_store(struct device *dev, \ + struct device_attribute *attr, \ + const char *buf, size_t count) \ +{ \ + struct hid_device *hdev = container_of(dev, struct hid_device, \ + dev); \ + \ + if (count != 256) \ + return -EINVAL; \ + \ + wacom_set_image(hdev, buf, OLED_ID); \ + \ + return count; \ +} \ + \ +static DEVICE_ATTR(oled##OLED_ID##_img, S_IWUSR | S_IWGRP, NULL, \ + wacom_oled##OLED_ID##_store) + +WACOM_STORE(0); +WACOM_STORE(1); +WACOM_STORE(2); +WACOM_STORE(3); +WACOM_STORE(4); +WACOM_STORE(5); +WACOM_STORE(6); +WACOM_STORE(7); + static int wacom_gr_parse_report(struct hid_device *hdev, struct wacom_data *wdata, struct input_dev *input, unsigned char *data) @@ -717,17 +834,33 @@ static int wacom_probe(struct hid_device *hdev, hid_warn(hdev, "can't create sysfs speed attribute err: %d\n", ret); +#define OLED_INIT(OLED_ID) \ + do { \ + ret = device_create_file(&hdev->dev, \ + &dev_attr_oled##OLED_ID##_img); \ + if (ret) \ + hid_warn(hdev, \ + "can't create sysfs oled attribute, err: %d\n", ret);\ + } while (0) + +OLED_INIT(0); +OLED_INIT(1); +OLED_INIT(2); +OLED_INIT(3); +OLED_INIT(4); +OLED_INIT(5); +OLED_INIT(6); +OLED_INIT(7); + wdata->features = 0; wacom_set_features(hdev, 1); if (hdev->product == USB_DEVICE_ID_WACOM_INTUOS4_BLUETOOTH) { sprintf(hdev->name, "%s", "Wacom Intuos4 WL"); ret = wacom_initialize_leds(hdev); - if (ret) { + if (ret) hid_warn(hdev, "can't create led attribute, err: %d\n", ret); - goto destroy_leds; - } } wdata->battery.properties = wacom_battery_props; @@ -740,8 +873,8 @@ static int wacom_probe(struct hid_device *hdev, ret = power_supply_register(&hdev->dev, &wdata->battery); if (ret) { - hid_warn(hdev, "can't create sysfs battery attribute, err: %d\n", - ret); + hid_err(hdev, "can't create sysfs battery attribute, err: %d\n", + ret); goto err_battery; } @@ -756,8 +889,8 @@ static int wacom_probe(struct hid_device *hdev, ret = power_supply_register(&hdev->dev, &wdata->ac); if (ret) { - hid_warn(hdev, - "can't create ac battery attribute, err: %d\n", ret); + hid_err(hdev, + "can't create ac battery attribute, err: %d\n", ret); goto err_ac; } @@ -767,10 +900,17 @@ static int wacom_probe(struct hid_device *hdev, err_ac: power_supply_unregister(&wdata->battery); err_battery: + wacom_destroy_leds(hdev); + device_remove_file(&hdev->dev, &dev_attr_oled0_img); + device_remove_file(&hdev->dev, &dev_attr_oled1_img); + device_remove_file(&hdev->dev, &dev_attr_oled2_img); + device_remove_file(&hdev->dev, &dev_attr_oled3_img); + device_remove_file(&hdev->dev, &dev_attr_oled4_img); + device_remove_file(&hdev->dev, &dev_attr_oled5_img); + device_remove_file(&hdev->dev, &dev_attr_oled6_img); + device_remove_file(&hdev->dev, &dev_attr_oled7_img); device_remove_file(&hdev->dev, &dev_attr_speed); hid_hw_stop(hdev); -destroy_leds: - wacom_destroy_leds(hdev); err_free: kfree(wdata); return ret; @@ -781,6 +921,14 @@ static void wacom_remove(struct hid_device *hdev) struct wacom_data *wdata = hid_get_drvdata(hdev); wacom_destroy_leds(hdev); + device_remove_file(&hdev->dev, &dev_attr_oled0_img); + device_remove_file(&hdev->dev, &dev_attr_oled1_img); + device_remove_file(&hdev->dev, &dev_attr_oled2_img); + device_remove_file(&hdev->dev, &dev_attr_oled3_img); + device_remove_file(&hdev->dev, &dev_attr_oled4_img); + device_remove_file(&hdev->dev, &dev_attr_oled5_img); + device_remove_file(&hdev->dev, &dev_attr_oled6_img); + device_remove_file(&hdev->dev, &dev_attr_oled7_img); device_remove_file(&hdev->dev, &dev_attr_speed); hid_hw_stop(hdev); diff --git a/drivers/hid/hid-waltop.c b/drivers/hid/hid-waltop.c index 745e4e9a8cf..bb536ab5941 100644 --- a/drivers/hid/hid-waltop.c +++ b/drivers/hid/hid-waltop.c @@ -638,28 +638,6 @@ static __u8 sirius_battery_free_tablet_rdesc_fixed[] = { 0xC0 /* End Collection */ }; -static int waltop_probe(struct hid_device *hdev, - const struct hid_device_id *id) -{ - int ret; - - ret = hid_parse(hdev); - if (ret) { - hid_err(hdev, "parse failed\n"); - goto err; - } - - ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT); - if (ret) { - hid_err(hdev, "hw start failed\n"); - goto err; - } - - return 0; -err: - return ret; -} - static __u8 *waltop_report_fixup(struct hid_device *hdev, __u8 *rdesc, unsigned int *rsize) { @@ -776,11 +754,6 @@ static int waltop_raw_event(struct hid_device *hdev, struct hid_report *report, return 0; } -static void waltop_remove(struct hid_device *hdev) -{ - hid_hw_stop(hdev); -} - static const struct hid_device_id waltop_devices[] = { { HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_SLIM_TABLET_5_8_INCH) }, @@ -803,10 +776,8 @@ MODULE_DEVICE_TABLE(hid, waltop_devices); static struct hid_driver waltop_driver = { .name = "waltop", .id_table = waltop_devices, - .probe = waltop_probe, .report_fixup = waltop_report_fixup, .raw_event = waltop_raw_event, - .remove = waltop_remove, }; static int __init waltop_init(void) diff --git a/drivers/hid/hid-wiimote-ext.c b/drivers/hid/hid-wiimote-ext.c index 0a1805c9b0e..bc85bf29062 100644 --- a/drivers/hid/hid-wiimote-ext.c +++ b/drivers/hid/hid-wiimote-ext.c @@ -28,12 +28,14 @@ struct wiimote_ext { bool mp_plugged; bool motionp; __u8 ext_type; + __u16 calib[4][3]; }; enum wiiext_type { WIIEXT_NONE, /* placeholder */ WIIEXT_CLASSIC, /* Nintendo classic controller */ WIIEXT_NUNCHUCK, /* Nintendo nunchuck controller */ + WIIEXT_BALANCE_BOARD, /* Nintendo balance board controller */ }; enum wiiext_keys { @@ -126,6 +128,7 @@ error: static __u8 ext_read(struct wiimote_ext *ext) { ssize_t ret; + __u8 buf[24], i, j, offs = 0; __u8 rmem[2], wmem; __u8 type = WIIEXT_NONE; @@ -151,6 +154,28 @@ static __u8 ext_read(struct wiimote_ext *ext) type = WIIEXT_NUNCHUCK; else if (rmem[0] == 0x01 && rmem[1] == 0x01) type = WIIEXT_CLASSIC; + else if (rmem[0] == 0x04 && rmem[1] == 0x02) + type = WIIEXT_BALANCE_BOARD; + } + + /* get balance board calibration data */ + if (type == WIIEXT_BALANCE_BOARD) { + ret = wiimote_cmd_read(ext->wdata, 0xa40024, buf, 12); + ret += wiimote_cmd_read(ext->wdata, 0xa40024 + 12, + buf + 12, 12); + + if (ret != 24) { + type = WIIEXT_NONE; + } else { + for (i = 0; i < 3; i++) { + for (j = 0; j < 4; j++) { + ext->calib[j][i] = buf[offs]; + ext->calib[j][i] <<= 8; + ext->calib[j][i] |= buf[offs + 1]; + offs += 2; + } + } + } } wiimote_cmd_release(ext->wdata); @@ -509,6 +534,71 @@ static void handler_classic(struct wiimote_ext *ext, const __u8 *payload) input_sync(ext->input); } +static void handler_balance_board(struct wiimote_ext *ext, const __u8 *payload) +{ + __s32 val[4], tmp; + unsigned int i; + + /* Byte | 8 7 6 5 4 3 2 1 | + * -----+--------------------------+ + * 1 | Top Right <15:8> | + * 2 | Top Right <7:0> | + * -----+--------------------------+ + * 3 | Bottom Right <15:8> | + * 4 | Bottom Right <7:0> | + * -----+--------------------------+ + * 5 | Top Left <15:8> | + * 6 | Top Left <7:0> | + * -----+--------------------------+ + * 7 | Bottom Left <15:8> | + * 8 | Bottom Left <7:0> | + * -----+--------------------------+ + * + * These values represent the weight-measurements of the Wii-balance + * board with 16bit precision. + * + * The balance-board is never reported interleaved with motionp. + */ + + val[0] = payload[0]; + val[0] <<= 8; + val[0] |= payload[1]; + + val[1] = payload[2]; + val[1] <<= 8; + val[1] |= payload[3]; + + val[2] = payload[4]; + val[2] <<= 8; + val[2] |= payload[5]; + + val[3] = payload[6]; + val[3] <<= 8; + val[3] |= payload[7]; + + /* apply calibration data */ + for (i = 0; i < 4; i++) { + if (val[i] < ext->calib[i][1]) { + tmp = val[i] - ext->calib[i][0]; + tmp *= 1700; + tmp /= ext->calib[i][1] - ext->calib[i][0]; + } else { + tmp = val[i] - ext->calib[i][1]; + tmp *= 1700; + tmp /= ext->calib[i][2] - ext->calib[i][1]; + tmp += 1700; + } + val[i] = tmp; + } + + input_report_abs(ext->input, ABS_HAT0X, val[0]); + input_report_abs(ext->input, ABS_HAT0Y, val[1]); + input_report_abs(ext->input, ABS_HAT1X, val[2]); + input_report_abs(ext->input, ABS_HAT1Y, val[3]); + + input_sync(ext->input); +} + /* call this with state.lock spinlock held */ void wiiext_handle(struct wiimote_data *wdata, const __u8 *payload) { @@ -523,6 +613,8 @@ void wiiext_handle(struct wiimote_data *wdata, const __u8 *payload) handler_nunchuck(ext, payload); } else if (ext->ext_type == WIIEXT_CLASSIC) { handler_classic(ext, payload); + } else if (ext->ext_type == WIIEXT_BALANCE_BOARD) { + handler_balance_board(ext, payload); } } @@ -551,6 +643,11 @@ static ssize_t wiiext_show(struct device *dev, struct device_attribute *attr, return sprintf(buf, "motionp+classic\n"); else return sprintf(buf, "classic\n"); + } else if (type == WIIEXT_BALANCE_BOARD) { + if (motionp) + return sprintf(buf, "motionp+balanceboard\n"); + else + return sprintf(buf, "balanceboard\n"); } else { if (motionp) return sprintf(buf, "motionp\n"); diff --git a/drivers/hid/hidraw.c b/drivers/hid/hidraw.c index 3b6f7bf5a77..17d15bb610d 100644 --- a/drivers/hid/hidraw.c +++ b/drivers/hid/hidraw.c @@ -42,6 +42,7 @@ static struct cdev hidraw_cdev; static struct class *hidraw_class; static struct hidraw *hidraw_table[HIDRAW_MAX_DEVICES]; static DEFINE_MUTEX(minors_lock); +static void drop_ref(struct hidraw *hid, int exists_bit); static ssize_t hidraw_read(struct file *file, char __user *buffer, size_t count, loff_t *ppos) { @@ -113,7 +114,7 @@ static ssize_t hidraw_send_report(struct file *file, const char __user *buffer, __u8 *buf; int ret = 0; - if (!hidraw_table[minor]) { + if (!hidraw_table[minor] || !hidraw_table[minor]->exist) { ret = -ENODEV; goto out; } @@ -261,7 +262,7 @@ static int hidraw_open(struct inode *inode, struct file *file) } mutex_lock(&minors_lock); - if (!hidraw_table[minor]) { + if (!hidraw_table[minor] || !hidraw_table[minor]->exist) { err = -ENODEV; goto out_unlock; } @@ -298,36 +299,12 @@ out: static int hidraw_release(struct inode * inode, struct file * file) { unsigned int minor = iminor(inode); - struct hidraw *dev; struct hidraw_list *list = file->private_data; - int ret; - int i; - - mutex_lock(&minors_lock); - if (!hidraw_table[minor]) { - ret = -ENODEV; - goto unlock; - } + drop_ref(hidraw_table[minor], 0); list_del(&list->node); - dev = hidraw_table[minor]; - if (!--dev->open) { - if (list->hidraw->exist) { - hid_hw_power(dev->hid, PM_HINT_NORMAL); - hid_hw_close(dev->hid); - } else { - kfree(list->hidraw); - } - } - - for (i = 0; i < HIDRAW_BUFFER_SIZE; ++i) - kfree(list->buffer[i].value); kfree(list); - ret = 0; -unlock: - mutex_unlock(&minors_lock); - - return ret; + return 0; } static long hidraw_ioctl(struct file *file, unsigned int cmd, @@ -529,21 +506,7 @@ EXPORT_SYMBOL_GPL(hidraw_connect); void hidraw_disconnect(struct hid_device *hid) { struct hidraw *hidraw = hid->hidraw; - - mutex_lock(&minors_lock); - hidraw->exist = 0; - - device_destroy(hidraw_class, MKDEV(hidraw_major, hidraw->minor)); - - hidraw_table[hidraw->minor] = NULL; - - if (hidraw->open) { - hid_hw_close(hid); - wake_up_interruptible(&hidraw->wait); - } else { - kfree(hidraw); - } - mutex_unlock(&minors_lock); + drop_ref(hidraw, 1); } EXPORT_SYMBOL_GPL(hidraw_disconnect); @@ -559,21 +522,28 @@ int __init hidraw_init(void) if (result < 0) { pr_warn("can't get major number\n"); - result = 0; goto out; } hidraw_class = class_create(THIS_MODULE, "hidraw"); if (IS_ERR(hidraw_class)) { result = PTR_ERR(hidraw_class); - unregister_chrdev(hidraw_major, "hidraw"); - goto out; + goto error_cdev; } cdev_init(&hidraw_cdev, &hidraw_ops); - cdev_add(&hidraw_cdev, dev_id, HIDRAW_MAX_DEVICES); + result = cdev_add(&hidraw_cdev, dev_id, HIDRAW_MAX_DEVICES); + if (result < 0) + goto error_class; + out: return result; + +error_class: + class_destroy(hidraw_class); +error_cdev: + unregister_chrdev_region(dev_id, HIDRAW_MAX_DEVICES); + goto out; } void hidraw_exit(void) @@ -585,3 +555,23 @@ void hidraw_exit(void) unregister_chrdev_region(dev_id, HIDRAW_MAX_DEVICES); } + +static void drop_ref(struct hidraw *hidraw, int exists_bit) +{ + mutex_lock(&minors_lock); + if (exists_bit) { + hid_hw_close(hidraw->hid); + hidraw->exist = 0; + if (hidraw->open) + wake_up_interruptible(&hidraw->wait); + } else { + --hidraw->open; + } + + if (!hidraw->open && !hidraw->exist) { + device_destroy(hidraw_class, MKDEV(hidraw_major, hidraw->minor)); + hidraw_table[hidraw->minor] = NULL; + kfree(hidraw); + } + mutex_unlock(&minors_lock); +} diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c index dedd8e4e5c6..8e0c4bf94eb 100644 --- a/drivers/hid/usbhid/hid-core.c +++ b/drivers/hid/usbhid/hid-core.c @@ -1415,20 +1415,20 @@ static int hid_post_reset(struct usb_interface *intf) * configuration descriptors passed, we already know that * the size of the HID report descriptor has not changed. */ - rdesc = kmalloc(hid->rsize, GFP_KERNEL); + rdesc = kmalloc(hid->dev_rsize, GFP_KERNEL); if (!rdesc) { dbg_hid("couldn't allocate rdesc memory (post_reset)\n"); return 1; } status = hid_get_class_descriptor(dev, interface->desc.bInterfaceNumber, - HID_DT_REPORT, rdesc, hid->rsize); + HID_DT_REPORT, rdesc, hid->dev_rsize); if (status < 0) { dbg_hid("reading report descriptor failed (post_reset)\n"); kfree(rdesc); return 1; } - status = memcmp(rdesc, hid->rdesc, hid->rsize); + status = memcmp(rdesc, hid->dev_rdesc, hid->dev_rsize); kfree(rdesc); if (status != 0) { dbg_hid("report descriptor changed\n"); diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c index 991e85c7325..11c7932dc7e 100644 --- a/drivers/hid/usbhid/hid-quirks.c +++ b/drivers/hid/usbhid/hid-quirks.c @@ -70,12 +70,13 @@ static const struct hid_blacklist { { USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_AXIS_295, HID_QUIRK_NOGET }, { USB_VENDOR_ID_DMI, USB_DEVICE_ID_DMI_ENC, HID_QUIRK_NOGET }, { USB_VENDOR_ID_ELO, USB_DEVICE_ID_ELO_TS2700, HID_QUIRK_NOGET }, + { USB_VENDOR_ID_FREESCALE, USB_DEVICE_ID_FREESCALE_MX28, HID_QUIRK_NOGET }, { USB_VENDOR_ID_MGE, USB_DEVICE_ID_MGE_UPS, HID_QUIRK_NOGET }, { USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN, HID_QUIRK_NO_INIT_REPORTS }, { USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN1, HID_QUIRK_NO_INIT_REPORTS }, { USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN2, HID_QUIRK_NO_INIT_REPORTS }, { USB_VENDOR_ID_PRODIGE, USB_DEVICE_ID_PRODIGE_CORDLESS, HID_QUIRK_NOGET }, - { USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_PIXART_IMAGING_INC_OPTICAL_TOUCH_SCREEN, HID_QUIRK_NOGET }, + { USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH_3001, HID_QUIRK_NOGET }, { USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH_3008, HID_QUIRK_NOGET }, { USB_VENDOR_ID_SENNHEISER, USB_DEVICE_ID_SENNHEISER_BTD500USB, HID_QUIRK_NOGET }, { USB_VENDOR_ID_SUN, USB_DEVICE_ID_RARITAN_KVM_DONGLE, HID_QUIRK_NOGET }, diff --git a/drivers/infiniband/hw/ehca/ehca_irq.c b/drivers/infiniband/hw/ehca/ehca_irq.c index 53589000fd0..8615d7cf7e0 100644 --- a/drivers/infiniband/hw/ehca/ehca_irq.c +++ b/drivers/infiniband/hw/ehca/ehca_irq.c @@ -42,6 +42,7 @@ */ #include <linux/slab.h> +#include <linux/smpboot.h> #include "ehca_classes.h" #include "ehca_irq.h" @@ -652,7 +653,7 @@ void ehca_tasklet_eq(unsigned long data) ehca_process_eq((struct ehca_shca*)data, 1); } -static inline int find_next_online_cpu(struct ehca_comp_pool *pool) +static int find_next_online_cpu(struct ehca_comp_pool *pool) { int cpu; unsigned long flags; @@ -662,17 +663,20 @@ static inline int find_next_online_cpu(struct ehca_comp_pool *pool) ehca_dmp(cpu_online_mask, cpumask_size(), ""); spin_lock_irqsave(&pool->last_cpu_lock, flags); - cpu = cpumask_next(pool->last_cpu, cpu_online_mask); - if (cpu >= nr_cpu_ids) - cpu = cpumask_first(cpu_online_mask); - pool->last_cpu = cpu; + do { + cpu = cpumask_next(pool->last_cpu, cpu_online_mask); + if (cpu >= nr_cpu_ids) + cpu = cpumask_first(cpu_online_mask); + pool->last_cpu = cpu; + } while (!per_cpu_ptr(pool->cpu_comp_tasks, cpu)->active); spin_unlock_irqrestore(&pool->last_cpu_lock, flags); return cpu; } static void __queue_comp_task(struct ehca_cq *__cq, - struct ehca_cpu_comp_task *cct) + struct ehca_cpu_comp_task *cct, + struct task_struct *thread) { unsigned long flags; @@ -683,7 +687,7 @@ static void __queue_comp_task(struct ehca_cq *__cq, __cq->nr_callbacks++; list_add_tail(&__cq->entry, &cct->cq_list); cct->cq_jobs++; - wake_up(&cct->wait_queue); + wake_up_process(thread); } else __cq->nr_callbacks++; @@ -695,6 +699,7 @@ static void queue_comp_task(struct ehca_cq *__cq) { int cpu_id; struct ehca_cpu_comp_task *cct; + struct task_struct *thread; int cq_jobs; unsigned long flags; @@ -702,7 +707,8 @@ static void queue_comp_task(struct ehca_cq *__cq) BUG_ON(!cpu_online(cpu_id)); cct = per_cpu_ptr(pool->cpu_comp_tasks, cpu_id); - BUG_ON(!cct); + thread = *per_cpu_ptr(pool->cpu_comp_threads, cpu_id); + BUG_ON(!cct || !thread); spin_lock_irqsave(&cct->task_lock, flags); cq_jobs = cct->cq_jobs; @@ -710,28 +716,25 @@ static void queue_comp_task(struct ehca_cq *__cq) if (cq_jobs > 0) { cpu_id = find_next_online_cpu(pool); cct = per_cpu_ptr(pool->cpu_comp_tasks, cpu_id); - BUG_ON(!cct); + thread = *per_cpu_ptr(pool->cpu_comp_threads, cpu_id); + BUG_ON(!cct || !thread); } - - __queue_comp_task(__cq, cct); + __queue_comp_task(__cq, cct, thread); } static void run_comp_task(struct ehca_cpu_comp_task *cct) { struct ehca_cq *cq; - unsigned long flags; - - spin_lock_irqsave(&cct->task_lock, flags); while (!list_empty(&cct->cq_list)) { cq = list_entry(cct->cq_list.next, struct ehca_cq, entry); - spin_unlock_irqrestore(&cct->task_lock, flags); + spin_unlock_irq(&cct->task_lock); comp_event_callback(cq); if (atomic_dec_and_test(&cq->nr_events)) wake_up(&cq->wait_completion); - spin_lock_irqsave(&cct->task_lock, flags); + spin_lock_irq(&cct->task_lock); spin_lock(&cq->task_lock); cq->nr_callbacks--; if (!cq->nr_callbacks) { @@ -740,159 +743,76 @@ static void run_comp_task(struct ehca_cpu_comp_task *cct) } spin_unlock(&cq->task_lock); } - - spin_unlock_irqrestore(&cct->task_lock, flags); } -static int comp_task(void *__cct) +static void comp_task_park(unsigned int cpu) { - struct ehca_cpu_comp_task *cct = __cct; - int cql_empty; - DECLARE_WAITQUEUE(wait, current); - - set_current_state(TASK_INTERRUPTIBLE); - while (!kthread_should_stop()) { - add_wait_queue(&cct->wait_queue, &wait); - - spin_lock_irq(&cct->task_lock); - cql_empty = list_empty(&cct->cq_list); - spin_unlock_irq(&cct->task_lock); - if (cql_empty) - schedule(); - else - __set_current_state(TASK_RUNNING); - - remove_wait_queue(&cct->wait_queue, &wait); + struct ehca_cpu_comp_task *cct = per_cpu_ptr(pool->cpu_comp_tasks, cpu); + struct ehca_cpu_comp_task *target; + struct task_struct *thread; + struct ehca_cq *cq, *tmp; + LIST_HEAD(list); - spin_lock_irq(&cct->task_lock); - cql_empty = list_empty(&cct->cq_list); - spin_unlock_irq(&cct->task_lock); - if (!cql_empty) - run_comp_task(__cct); + spin_lock_irq(&cct->task_lock); + cct->cq_jobs = 0; + cct->active = 0; + list_splice_init(&cct->cq_list, &list); + spin_unlock_irq(&cct->task_lock); - set_current_state(TASK_INTERRUPTIBLE); + cpu = find_next_online_cpu(pool); + target = per_cpu_ptr(pool->cpu_comp_tasks, cpu); + thread = *per_cpu_ptr(pool->cpu_comp_threads, cpu); + spin_lock_irq(&target->task_lock); + list_for_each_entry_safe(cq, tmp, &list, entry) { + list_del(&cq->entry); + __queue_comp_task(cq, target, thread); } - __set_current_state(TASK_RUNNING); - - return 0; -} - -static struct task_struct *create_comp_task(struct ehca_comp_pool *pool, - int cpu) -{ - struct ehca_cpu_comp_task *cct; - - cct = per_cpu_ptr(pool->cpu_comp_tasks, cpu); - spin_lock_init(&cct->task_lock); - INIT_LIST_HEAD(&cct->cq_list); - init_waitqueue_head(&cct->wait_queue); - cct->task = kthread_create_on_node(comp_task, cct, cpu_to_node(cpu), - "ehca_comp/%d", cpu); - - return cct->task; + spin_unlock_irq(&target->task_lock); } -static void destroy_comp_task(struct ehca_comp_pool *pool, - int cpu) +static void comp_task_stop(unsigned int cpu, bool online) { - struct ehca_cpu_comp_task *cct; - struct task_struct *task; - unsigned long flags_cct; - - cct = per_cpu_ptr(pool->cpu_comp_tasks, cpu); - - spin_lock_irqsave(&cct->task_lock, flags_cct); + struct ehca_cpu_comp_task *cct = per_cpu_ptr(pool->cpu_comp_tasks, cpu); - task = cct->task; - cct->task = NULL; + spin_lock_irq(&cct->task_lock); cct->cq_jobs = 0; - - spin_unlock_irqrestore(&cct->task_lock, flags_cct); - - if (task) - kthread_stop(task); + cct->active = 0; + WARN_ON(!list_empty(&cct->cq_list)); + spin_unlock_irq(&cct->task_lock); } -static void __cpuinit take_over_work(struct ehca_comp_pool *pool, int cpu) +static int comp_task_should_run(unsigned int cpu) { struct ehca_cpu_comp_task *cct = per_cpu_ptr(pool->cpu_comp_tasks, cpu); - LIST_HEAD(list); - struct ehca_cq *cq; - unsigned long flags_cct; - - spin_lock_irqsave(&cct->task_lock, flags_cct); - - list_splice_init(&cct->cq_list, &list); - - while (!list_empty(&list)) { - cq = list_entry(cct->cq_list.next, struct ehca_cq, entry); - - list_del(&cq->entry); - __queue_comp_task(cq, this_cpu_ptr(pool->cpu_comp_tasks)); - } - - spin_unlock_irqrestore(&cct->task_lock, flags_cct); + return cct->cq_jobs; } -static int __cpuinit comp_pool_callback(struct notifier_block *nfb, - unsigned long action, - void *hcpu) +static void comp_task(unsigned int cpu) { - unsigned int cpu = (unsigned long)hcpu; - struct ehca_cpu_comp_task *cct; + struct ehca_cpu_comp_task *cct = this_cpu_ptr(pool->cpu_comp_tasks); + int cql_empty; - switch (action) { - case CPU_UP_PREPARE: - case CPU_UP_PREPARE_FROZEN: - ehca_gen_dbg("CPU: %x (CPU_PREPARE)", cpu); - if (!create_comp_task(pool, cpu)) { - ehca_gen_err("Can't create comp_task for cpu: %x", cpu); - return notifier_from_errno(-ENOMEM); - } - break; - case CPU_UP_CANCELED: - case CPU_UP_CANCELED_FROZEN: - ehca_gen_dbg("CPU: %x (CPU_CANCELED)", cpu); - cct = per_cpu_ptr(pool->cpu_comp_tasks, cpu); - kthread_bind(cct->task, cpumask_any(cpu_online_mask)); - destroy_comp_task(pool, cpu); - break; - case CPU_ONLINE: - case CPU_ONLINE_FROZEN: - ehca_gen_dbg("CPU: %x (CPU_ONLINE)", cpu); - cct = per_cpu_ptr(pool->cpu_comp_tasks, cpu); - kthread_bind(cct->task, cpu); - wake_up_process(cct->task); - break; - case CPU_DOWN_PREPARE: - case CPU_DOWN_PREPARE_FROZEN: - ehca_gen_dbg("CPU: %x (CPU_DOWN_PREPARE)", cpu); - break; - case CPU_DOWN_FAILED: - case CPU_DOWN_FAILED_FROZEN: - ehca_gen_dbg("CPU: %x (CPU_DOWN_FAILED)", cpu); - break; - case CPU_DEAD: - case CPU_DEAD_FROZEN: - ehca_gen_dbg("CPU: %x (CPU_DEAD)", cpu); - destroy_comp_task(pool, cpu); - take_over_work(pool, cpu); - break; + spin_lock_irq(&cct->task_lock); + cql_empty = list_empty(&cct->cq_list); + if (!cql_empty) { + __set_current_state(TASK_RUNNING); + run_comp_task(cct); } - - return NOTIFY_OK; + spin_unlock_irq(&cct->task_lock); } -static struct notifier_block comp_pool_callback_nb __cpuinitdata = { - .notifier_call = comp_pool_callback, - .priority = 0, +static struct smp_hotplug_thread comp_pool_threads = { + .thread_should_run = comp_task_should_run, + .thread_fn = comp_task, + .thread_comm = "ehca_comp/%u", + .cleanup = comp_task_stop, + .park = comp_task_park, }; int ehca_create_comp_pool(void) { - int cpu; - struct task_struct *task; + int cpu, ret = -ENOMEM; if (!ehca_scaling_code) return 0; @@ -905,38 +825,46 @@ int ehca_create_comp_pool(void) pool->last_cpu = cpumask_any(cpu_online_mask); pool->cpu_comp_tasks = alloc_percpu(struct ehca_cpu_comp_task); - if (pool->cpu_comp_tasks == NULL) { - kfree(pool); - return -EINVAL; - } + if (!pool->cpu_comp_tasks) + goto out_pool; - for_each_online_cpu(cpu) { - task = create_comp_task(pool, cpu); - if (task) { - kthread_bind(task, cpu); - wake_up_process(task); - } + pool->cpu_comp_threads = alloc_percpu(struct task_struct *); + if (!pool->cpu_comp_threads) + goto out_tasks; + + for_each_present_cpu(cpu) { + struct ehca_cpu_comp_task *cct; + + cct = per_cpu_ptr(pool->cpu_comp_tasks, cpu); + spin_lock_init(&cct->task_lock); + INIT_LIST_HEAD(&cct->cq_list); } - register_hotcpu_notifier(&comp_pool_callback_nb); + comp_pool_threads.store = pool->cpu_comp_threads; + ret = smpboot_register_percpu_thread(&comp_pool_threads); + if (ret) + goto out_threads; - printk(KERN_INFO "eHCA scaling code enabled\n"); + pr_info("eHCA scaling code enabled\n"); + return ret; - return 0; +out_threads: + free_percpu(pool->cpu_comp_threads); +out_tasks: + free_percpu(pool->cpu_comp_tasks); +out_pool: + kfree(pool); + return ret; } void ehca_destroy_comp_pool(void) { - int i; - if (!ehca_scaling_code) return; - unregister_hotcpu_notifier(&comp_pool_callback_nb); - - for_each_online_cpu(i) - destroy_comp_task(pool, i); + smpboot_unregister_percpu_thread(&comp_pool_threads); + free_percpu(pool->cpu_comp_threads); free_percpu(pool->cpu_comp_tasks); kfree(pool); } diff --git a/drivers/infiniband/hw/ehca/ehca_irq.h b/drivers/infiniband/hw/ehca/ehca_irq.h index 3346cb06cea..5370199f08c 100644 --- a/drivers/infiniband/hw/ehca/ehca_irq.h +++ b/drivers/infiniband/hw/ehca/ehca_irq.h @@ -58,15 +58,15 @@ void ehca_tasklet_eq(unsigned long data); void ehca_process_eq(struct ehca_shca *shca, int is_irq); struct ehca_cpu_comp_task { - wait_queue_head_t wait_queue; struct list_head cq_list; - struct task_struct *task; spinlock_t task_lock; int cq_jobs; + int active; }; struct ehca_comp_pool { - struct ehca_cpu_comp_task *cpu_comp_tasks; + struct ehca_cpu_comp_task __percpu *cpu_comp_tasks; + struct task_struct * __percpu *cpu_comp_threads; int last_cpu; spinlock_t last_cpu_lock; }; diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c index 6c58bfff01a..118d0300f1f 100644 --- a/drivers/input/evdev.c +++ b/drivers/input/evdev.c @@ -54,16 +54,9 @@ struct evdev_client { static struct evdev *evdev_table[EVDEV_MINORS]; static DEFINE_MUTEX(evdev_table_mutex); -static void evdev_pass_event(struct evdev_client *client, - struct input_event *event, - ktime_t mono, ktime_t real) +static void __pass_event(struct evdev_client *client, + const struct input_event *event) { - event->time = ktime_to_timeval(client->clkid == CLOCK_MONOTONIC ? - mono : real); - - /* Interrupts are disabled, just acquire the lock. */ - spin_lock(&client->buffer_lock); - client->buffer[client->head++] = *event; client->head &= client->bufsize - 1; @@ -86,42 +79,74 @@ static void evdev_pass_event(struct evdev_client *client, client->packet_head = client->head; kill_fasync(&client->fasync, SIGIO, POLL_IN); } +} + +static void evdev_pass_values(struct evdev_client *client, + const struct input_value *vals, unsigned int count, + ktime_t mono, ktime_t real) +{ + struct evdev *evdev = client->evdev; + const struct input_value *v; + struct input_event event; + bool wakeup = false; + + event.time = ktime_to_timeval(client->clkid == CLOCK_MONOTONIC ? + mono : real); + + /* Interrupts are disabled, just acquire the lock. */ + spin_lock(&client->buffer_lock); + + for (v = vals; v != vals + count; v++) { + event.type = v->type; + event.code = v->code; + event.value = v->value; + __pass_event(client, &event); + if (v->type == EV_SYN && v->code == SYN_REPORT) + wakeup = true; + } spin_unlock(&client->buffer_lock); + + if (wakeup) + wake_up_interruptible(&evdev->wait); } /* - * Pass incoming event to all connected clients. + * Pass incoming events to all connected clients. */ -static void evdev_event(struct input_handle *handle, - unsigned int type, unsigned int code, int value) +static void evdev_events(struct input_handle *handle, + const struct input_value *vals, unsigned int count) { struct evdev *evdev = handle->private; struct evdev_client *client; - struct input_event event; ktime_t time_mono, time_real; time_mono = ktime_get(); time_real = ktime_sub(time_mono, ktime_get_monotonic_offset()); - event.type = type; - event.code = code; - event.value = value; - rcu_read_lock(); client = rcu_dereference(evdev->grab); if (client) - evdev_pass_event(client, &event, time_mono, time_real); + evdev_pass_values(client, vals, count, time_mono, time_real); else list_for_each_entry_rcu(client, &evdev->client_list, node) - evdev_pass_event(client, &event, time_mono, time_real); + evdev_pass_values(client, vals, count, + time_mono, time_real); rcu_read_unlock(); +} - if (type == EV_SYN && code == SYN_REPORT) - wake_up_interruptible(&evdev->wait); +/* + * Pass incoming event to all connected clients. + */ +static void evdev_event(struct input_handle *handle, + unsigned int type, unsigned int code, int value) +{ + struct input_value vals[] = { { type, code, value } }; + + evdev_events(handle, vals, 1); } static int evdev_fasync(int fd, struct file *file, int on) @@ -653,20 +678,22 @@ static int evdev_handle_mt_request(struct input_dev *dev, unsigned int size, int __user *ip) { - const struct input_mt_slot *mt = dev->mt; + const struct input_mt *mt = dev->mt; unsigned int code; int max_slots; int i; if (get_user(code, &ip[0])) return -EFAULT; - if (!input_is_mt_value(code)) + if (!mt || !input_is_mt_value(code)) return -EINVAL; max_slots = (size - sizeof(__u32)) / sizeof(__s32); - for (i = 0; i < dev->mtsize && i < max_slots; i++) - if (put_user(input_mt_get_value(&mt[i], code), &ip[1 + i])) + for (i = 0; i < mt->num_slots && i < max_slots; i++) { + int value = input_mt_get_value(&mt->slots[i], code); + if (put_user(value, &ip[1 + i])) return -EFAULT; + } return 0; } @@ -1048,6 +1075,7 @@ MODULE_DEVICE_TABLE(input, evdev_ids); static struct input_handler evdev_handler = { .event = evdev_event, + .events = evdev_events, .connect = evdev_connect, .disconnect = evdev_disconnect, .fops = &evdev_fops, diff --git a/drivers/input/input-mt.c b/drivers/input/input-mt.c index 70a16c7da8c..c0ec7d42c3b 100644 --- a/drivers/input/input-mt.c +++ b/drivers/input/input-mt.c @@ -14,6 +14,14 @@ #define TRKID_SGN ((TRKID_MAX + 1) >> 1) +static void copy_abs(struct input_dev *dev, unsigned int dst, unsigned int src) +{ + if (dev->absinfo && test_bit(src, dev->absbit)) { + dev->absinfo[dst] = dev->absinfo[src]; + dev->absbit[BIT_WORD(dst)] |= BIT_MASK(dst); + } +} + /** * input_mt_init_slots() - initialize MT input slots * @dev: input device supporting MT events and finger tracking @@ -25,29 +33,63 @@ * May be called repeatedly. Returns -EINVAL if attempting to * reinitialize with a different number of slots. */ -int input_mt_init_slots(struct input_dev *dev, unsigned int num_slots) +int input_mt_init_slots(struct input_dev *dev, unsigned int num_slots, + unsigned int flags) { + struct input_mt *mt = dev->mt; int i; if (!num_slots) return 0; - if (dev->mt) - return dev->mtsize != num_slots ? -EINVAL : 0; + if (mt) + return mt->num_slots != num_slots ? -EINVAL : 0; - dev->mt = kcalloc(num_slots, sizeof(struct input_mt_slot), GFP_KERNEL); - if (!dev->mt) - return -ENOMEM; + mt = kzalloc(sizeof(*mt) + num_slots * sizeof(*mt->slots), GFP_KERNEL); + if (!mt) + goto err_mem; - dev->mtsize = num_slots; + mt->num_slots = num_slots; + mt->flags = flags; input_set_abs_params(dev, ABS_MT_SLOT, 0, num_slots - 1, 0, 0); input_set_abs_params(dev, ABS_MT_TRACKING_ID, 0, TRKID_MAX, 0, 0); - input_set_events_per_packet(dev, 6 * num_slots); + + if (flags & (INPUT_MT_POINTER | INPUT_MT_DIRECT)) { + __set_bit(EV_KEY, dev->evbit); + __set_bit(BTN_TOUCH, dev->keybit); + + copy_abs(dev, ABS_X, ABS_MT_POSITION_X); + copy_abs(dev, ABS_Y, ABS_MT_POSITION_Y); + copy_abs(dev, ABS_PRESSURE, ABS_MT_PRESSURE); + } + if (flags & INPUT_MT_POINTER) { + __set_bit(BTN_TOOL_FINGER, dev->keybit); + __set_bit(BTN_TOOL_DOUBLETAP, dev->keybit); + if (num_slots >= 3) + __set_bit(BTN_TOOL_TRIPLETAP, dev->keybit); + if (num_slots >= 4) + __set_bit(BTN_TOOL_QUADTAP, dev->keybit); + if (num_slots >= 5) + __set_bit(BTN_TOOL_QUINTTAP, dev->keybit); + __set_bit(INPUT_PROP_POINTER, dev->propbit); + } + if (flags & INPUT_MT_DIRECT) + __set_bit(INPUT_PROP_DIRECT, dev->propbit); + if (flags & INPUT_MT_TRACK) { + unsigned int n2 = num_slots * num_slots; + mt->red = kcalloc(n2, sizeof(*mt->red), GFP_KERNEL); + if (!mt->red) + goto err_mem; + } /* Mark slots as 'unused' */ for (i = 0; i < num_slots; i++) - input_mt_set_value(&dev->mt[i], ABS_MT_TRACKING_ID, -1); + input_mt_set_value(&mt->slots[i], ABS_MT_TRACKING_ID, -1); + dev->mt = mt; return 0; +err_mem: + kfree(mt); + return -ENOMEM; } EXPORT_SYMBOL(input_mt_init_slots); @@ -60,11 +102,11 @@ EXPORT_SYMBOL(input_mt_init_slots); */ void input_mt_destroy_slots(struct input_dev *dev) { - kfree(dev->mt); + if (dev->mt) { + kfree(dev->mt->red); + kfree(dev->mt); + } dev->mt = NULL; - dev->mtsize = 0; - dev->slot = 0; - dev->trkid = 0; } EXPORT_SYMBOL(input_mt_destroy_slots); @@ -83,18 +125,24 @@ EXPORT_SYMBOL(input_mt_destroy_slots); void input_mt_report_slot_state(struct input_dev *dev, unsigned int tool_type, bool active) { - struct input_mt_slot *mt; + struct input_mt *mt = dev->mt; + struct input_mt_slot *slot; int id; - if (!dev->mt || !active) { + if (!mt) + return; + + slot = &mt->slots[mt->slot]; + slot->frame = mt->frame; + + if (!active) { input_event(dev, EV_ABS, ABS_MT_TRACKING_ID, -1); return; } - mt = &dev->mt[dev->slot]; - id = input_mt_get_value(mt, ABS_MT_TRACKING_ID); - if (id < 0 || input_mt_get_value(mt, ABS_MT_TOOL_TYPE) != tool_type) - id = input_mt_new_trkid(dev); + id = input_mt_get_value(slot, ABS_MT_TRACKING_ID); + if (id < 0 || input_mt_get_value(slot, ABS_MT_TOOL_TYPE) != tool_type) + id = input_mt_new_trkid(mt); input_event(dev, EV_ABS, ABS_MT_TRACKING_ID, id); input_event(dev, EV_ABS, ABS_MT_TOOL_TYPE, tool_type); @@ -135,13 +183,19 @@ EXPORT_SYMBOL(input_mt_report_finger_count); */ void input_mt_report_pointer_emulation(struct input_dev *dev, bool use_count) { - struct input_mt_slot *oldest = NULL; - int oldid = dev->trkid; - int count = 0; - int i; + struct input_mt *mt = dev->mt; + struct input_mt_slot *oldest; + int oldid, count, i; + + if (!mt) + return; + + oldest = 0; + oldid = mt->trkid; + count = 0; - for (i = 0; i < dev->mtsize; ++i) { - struct input_mt_slot *ps = &dev->mt[i]; + for (i = 0; i < mt->num_slots; ++i) { + struct input_mt_slot *ps = &mt->slots[i]; int id = input_mt_get_value(ps, ABS_MT_TRACKING_ID); if (id < 0) @@ -160,13 +214,208 @@ void input_mt_report_pointer_emulation(struct input_dev *dev, bool use_count) if (oldest) { int x = input_mt_get_value(oldest, ABS_MT_POSITION_X); int y = input_mt_get_value(oldest, ABS_MT_POSITION_Y); - int p = input_mt_get_value(oldest, ABS_MT_PRESSURE); input_event(dev, EV_ABS, ABS_X, x); input_event(dev, EV_ABS, ABS_Y, y); - input_event(dev, EV_ABS, ABS_PRESSURE, p); + + if (test_bit(ABS_MT_PRESSURE, dev->absbit)) { + int p = input_mt_get_value(oldest, ABS_MT_PRESSURE); + input_event(dev, EV_ABS, ABS_PRESSURE, p); + } } else { - input_event(dev, EV_ABS, ABS_PRESSURE, 0); + if (test_bit(ABS_MT_PRESSURE, dev->absbit)) + input_event(dev, EV_ABS, ABS_PRESSURE, 0); } } EXPORT_SYMBOL(input_mt_report_pointer_emulation); + +/** + * input_mt_sync_frame() - synchronize mt frame + * @dev: input device with allocated MT slots + * + * Close the frame and prepare the internal state for a new one. + * Depending on the flags, marks unused slots as inactive and performs + * pointer emulation. + */ +void input_mt_sync_frame(struct input_dev *dev) +{ + struct input_mt *mt = dev->mt; + struct input_mt_slot *s; + + if (!mt) + return; + + if (mt->flags & INPUT_MT_DROP_UNUSED) { + for (s = mt->slots; s != mt->slots + mt->num_slots; s++) { + if (s->frame == mt->frame) + continue; + input_mt_slot(dev, s - mt->slots); + input_event(dev, EV_ABS, ABS_MT_TRACKING_ID, -1); + } + } + + input_mt_report_pointer_emulation(dev, (mt->flags & INPUT_MT_POINTER)); + + mt->frame++; +} +EXPORT_SYMBOL(input_mt_sync_frame); + +static int adjust_dual(int *begin, int step, int *end, int eq) +{ + int f, *p, s, c; + + if (begin == end) + return 0; + + f = *begin; + p = begin + step; + s = p == end ? f + 1 : *p; + + for (; p != end; p += step) + if (*p < f) + s = f, f = *p; + else if (*p < s) + s = *p; + + c = (f + s + 1) / 2; + if (c == 0 || (c > 0 && !eq)) + return 0; + if (s < 0) + c *= 2; + + for (p = begin; p != end; p += step) + *p -= c; + + return (c < s && s <= 0) || (f >= 0 && f < c); +} + +static void find_reduced_matrix(int *w, int nr, int nc, int nrc) +{ + int i, k, sum; + + for (k = 0; k < nrc; k++) { + for (i = 0; i < nr; i++) + adjust_dual(w + i, nr, w + i + nrc, nr <= nc); + sum = 0; + for (i = 0; i < nrc; i += nr) + sum += adjust_dual(w + i, 1, w + i + nr, nc <= nr); + if (!sum) + break; + } +} + +static int input_mt_set_matrix(struct input_mt *mt, + const struct input_mt_pos *pos, int num_pos) +{ + const struct input_mt_pos *p; + struct input_mt_slot *s; + int *w = mt->red; + int x, y; + + for (s = mt->slots; s != mt->slots + mt->num_slots; s++) { + if (!input_mt_is_active(s)) + continue; + x = input_mt_get_value(s, ABS_MT_POSITION_X); + y = input_mt_get_value(s, ABS_MT_POSITION_Y); + for (p = pos; p != pos + num_pos; p++) { + int dx = x - p->x, dy = y - p->y; + *w++ = dx * dx + dy * dy; + } + } + + return w - mt->red; +} + +static void input_mt_set_slots(struct input_mt *mt, + int *slots, int num_pos) +{ + struct input_mt_slot *s; + int *w = mt->red, *p; + + for (p = slots; p != slots + num_pos; p++) + *p = -1; + + for (s = mt->slots; s != mt->slots + mt->num_slots; s++) { + if (!input_mt_is_active(s)) + continue; + for (p = slots; p != slots + num_pos; p++) + if (*w++ < 0) + *p = s - mt->slots; + } + + for (s = mt->slots; s != mt->slots + mt->num_slots; s++) { + if (input_mt_is_active(s)) + continue; + for (p = slots; p != slots + num_pos; p++) + if (*p < 0) { + *p = s - mt->slots; + break; + } + } +} + +/** + * input_mt_assign_slots() - perform a best-match assignment + * @dev: input device with allocated MT slots + * @slots: the slot assignment to be filled + * @pos: the position array to match + * @num_pos: number of positions + * + * Performs a best match against the current contacts and returns + * the slot assignment list. New contacts are assigned to unused + * slots. + * + * Returns zero on success, or negative error in case of failure. + */ +int input_mt_assign_slots(struct input_dev *dev, int *slots, + const struct input_mt_pos *pos, int num_pos) +{ + struct input_mt *mt = dev->mt; + int nrc; + + if (!mt || !mt->red) + return -ENXIO; + if (num_pos > mt->num_slots) + return -EINVAL; + if (num_pos < 1) + return 0; + + nrc = input_mt_set_matrix(mt, pos, num_pos); + find_reduced_matrix(mt->red, num_pos, nrc / num_pos, nrc); + input_mt_set_slots(mt, slots, num_pos); + + return 0; +} +EXPORT_SYMBOL(input_mt_assign_slots); + +/** + * input_mt_get_slot_by_key() - return slot matching key + * @dev: input device with allocated MT slots + * @key: the key of the sought slot + * + * Returns the slot of the given key, if it exists, otherwise + * set the key on the first unused slot and return. + * + * If no available slot can be found, -1 is returned. + */ +int input_mt_get_slot_by_key(struct input_dev *dev, int key) +{ + struct input_mt *mt = dev->mt; + struct input_mt_slot *s; + + if (!mt) + return -1; + + for (s = mt->slots; s != mt->slots + mt->num_slots; s++) + if (input_mt_is_active(s) && s->key == key) + return s - mt->slots; + + for (s = mt->slots; s != mt->slots + mt->num_slots; s++) + if (!input_mt_is_active(s)) { + s->key = key; + return s - mt->slots; + } + + return -1; +} +EXPORT_SYMBOL(input_mt_get_slot_by_key); diff --git a/drivers/input/input.c b/drivers/input/input.c index 8921c6180c5..5244f3d05b1 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -47,6 +47,8 @@ static DEFINE_MUTEX(input_mutex); static struct input_handler *input_table[8]; +static const struct input_value input_value_sync = { EV_SYN, SYN_REPORT, 1 }; + static inline int is_event_supported(unsigned int code, unsigned long *bm, unsigned int max) { @@ -69,42 +71,102 @@ static int input_defuzz_abs_event(int value, int old_val, int fuzz) return value; } +static void input_start_autorepeat(struct input_dev *dev, int code) +{ + if (test_bit(EV_REP, dev->evbit) && + dev->rep[REP_PERIOD] && dev->rep[REP_DELAY] && + dev->timer.data) { + dev->repeat_key = code; + mod_timer(&dev->timer, + jiffies + msecs_to_jiffies(dev->rep[REP_DELAY])); + } +} + +static void input_stop_autorepeat(struct input_dev *dev) +{ + del_timer(&dev->timer); +} + /* * Pass event first through all filters and then, if event has not been * filtered out, through all open handles. This function is called with * dev->event_lock held and interrupts disabled. */ -static void input_pass_event(struct input_dev *dev, - unsigned int type, unsigned int code, int value) +static unsigned int input_to_handler(struct input_handle *handle, + struct input_value *vals, unsigned int count) +{ + struct input_handler *handler = handle->handler; + struct input_value *end = vals; + struct input_value *v; + + for (v = vals; v != vals + count; v++) { + if (handler->filter && + handler->filter(handle, v->type, v->code, v->value)) + continue; + if (end != v) + *end = *v; + end++; + } + + count = end - vals; + if (!count) + return 0; + + if (handler->events) + handler->events(handle, vals, count); + else if (handler->event) + for (v = vals; v != end; v++) + handler->event(handle, v->type, v->code, v->value); + + return count; +} + +/* + * Pass values first through all filters and then, if event has not been + * filtered out, through all open handles. This function is called with + * dev->event_lock held and interrupts disabled. + */ +static void input_pass_values(struct input_dev *dev, + struct input_value *vals, unsigned int count) { - struct input_handler *handler; struct input_handle *handle; + struct input_value *v; + + if (!count) + return; rcu_read_lock(); handle = rcu_dereference(dev->grab); - if (handle) - handle->handler->event(handle, type, code, value); - else { - bool filtered = false; - - list_for_each_entry_rcu(handle, &dev->h_list, d_node) { - if (!handle->open) - continue; + if (handle) { + count = input_to_handler(handle, vals, count); + } else { + list_for_each_entry_rcu(handle, &dev->h_list, d_node) + if (handle->open) + count = input_to_handler(handle, vals, count); + } - handler = handle->handler; - if (!handler->filter) { - if (filtered) - break; + rcu_read_unlock(); - handler->event(handle, type, code, value); + add_input_randomness(vals->type, vals->code, vals->value); - } else if (handler->filter(handle, type, code, value)) - filtered = true; + /* trigger auto repeat for key events */ + for (v = vals; v != vals + count; v++) { + if (v->type == EV_KEY && v->value != 2) { + if (v->value) + input_start_autorepeat(dev, v->code); + else + input_stop_autorepeat(dev); } } +} - rcu_read_unlock(); +static void input_pass_event(struct input_dev *dev, + unsigned int type, unsigned int code, int value) +{ + struct input_value vals[] = { { type, code, value } }; + + input_pass_values(dev, vals, ARRAY_SIZE(vals)); } /* @@ -121,18 +183,12 @@ static void input_repeat_key(unsigned long data) if (test_bit(dev->repeat_key, dev->key) && is_event_supported(dev->repeat_key, dev->keybit, KEY_MAX)) { + struct input_value vals[] = { + { EV_KEY, dev->repeat_key, 2 }, + input_value_sync + }; - input_pass_event(dev, EV_KEY, dev->repeat_key, 2); - - if (dev->sync) { - /* - * Only send SYN_REPORT if we are not in a middle - * of driver parsing a new hardware packet. - * Otherwise assume that the driver will send - * SYN_REPORT once it's done. - */ - input_pass_event(dev, EV_SYN, SYN_REPORT, 1); - } + input_pass_values(dev, vals, ARRAY_SIZE(vals)); if (dev->rep[REP_PERIOD]) mod_timer(&dev->timer, jiffies + @@ -142,30 +198,17 @@ static void input_repeat_key(unsigned long data) spin_unlock_irqrestore(&dev->event_lock, flags); } -static void input_start_autorepeat(struct input_dev *dev, int code) -{ - if (test_bit(EV_REP, dev->evbit) && - dev->rep[REP_PERIOD] && dev->rep[REP_DELAY] && - dev->timer.data) { - dev->repeat_key = code; - mod_timer(&dev->timer, - jiffies + msecs_to_jiffies(dev->rep[REP_DELAY])); - } -} - -static void input_stop_autorepeat(struct input_dev *dev) -{ - del_timer(&dev->timer); -} - #define INPUT_IGNORE_EVENT 0 #define INPUT_PASS_TO_HANDLERS 1 #define INPUT_PASS_TO_DEVICE 2 +#define INPUT_SLOT 4 +#define INPUT_FLUSH 8 #define INPUT_PASS_TO_ALL (INPUT_PASS_TO_HANDLERS | INPUT_PASS_TO_DEVICE) static int input_handle_abs_event(struct input_dev *dev, unsigned int code, int *pval) { + struct input_mt *mt = dev->mt; bool is_mt_event; int *pold; @@ -174,8 +217,8 @@ static int input_handle_abs_event(struct input_dev *dev, * "Stage" the event; we'll flush it later, when we * get actual touch data. */ - if (*pval >= 0 && *pval < dev->mtsize) - dev->slot = *pval; + if (mt && *pval >= 0 && *pval < mt->num_slots) + mt->slot = *pval; return INPUT_IGNORE_EVENT; } @@ -184,9 +227,8 @@ static int input_handle_abs_event(struct input_dev *dev, if (!is_mt_event) { pold = &dev->absinfo[code].value; - } else if (dev->mt) { - struct input_mt_slot *mtslot = &dev->mt[dev->slot]; - pold = &mtslot->abs[code - ABS_MT_FIRST]; + } else if (mt) { + pold = &mt->slots[mt->slot].abs[code - ABS_MT_FIRST]; } else { /* * Bypass filtering for multi-touch events when @@ -205,16 +247,16 @@ static int input_handle_abs_event(struct input_dev *dev, } /* Flush pending "slot" event */ - if (is_mt_event && dev->slot != input_abs_get_val(dev, ABS_MT_SLOT)) { - input_abs_set_val(dev, ABS_MT_SLOT, dev->slot); - input_pass_event(dev, EV_ABS, ABS_MT_SLOT, dev->slot); + if (is_mt_event && mt && mt->slot != input_abs_get_val(dev, ABS_MT_SLOT)) { + input_abs_set_val(dev, ABS_MT_SLOT, mt->slot); + return INPUT_PASS_TO_HANDLERS | INPUT_SLOT; } return INPUT_PASS_TO_HANDLERS; } -static void input_handle_event(struct input_dev *dev, - unsigned int type, unsigned int code, int value) +static int input_get_disposition(struct input_dev *dev, + unsigned int type, unsigned int code, int value) { int disposition = INPUT_IGNORE_EVENT; @@ -227,37 +269,34 @@ static void input_handle_event(struct input_dev *dev, break; case SYN_REPORT: - if (!dev->sync) { - dev->sync = true; - disposition = INPUT_PASS_TO_HANDLERS; - } + disposition = INPUT_PASS_TO_HANDLERS | INPUT_FLUSH; break; case SYN_MT_REPORT: - dev->sync = false; disposition = INPUT_PASS_TO_HANDLERS; break; } break; case EV_KEY: - if (is_event_supported(code, dev->keybit, KEY_MAX) && - !!test_bit(code, dev->key) != value) { + if (is_event_supported(code, dev->keybit, KEY_MAX)) { - if (value != 2) { - __change_bit(code, dev->key); - if (value) - input_start_autorepeat(dev, code); - else - input_stop_autorepeat(dev); + /* auto-repeat bypasses state updates */ + if (value == 2) { + disposition = INPUT_PASS_TO_HANDLERS; + break; } - disposition = INPUT_PASS_TO_HANDLERS; + if (!!test_bit(code, dev->key) != !!value) { + + __change_bit(code, dev->key); + disposition = INPUT_PASS_TO_HANDLERS; + } } break; case EV_SW: if (is_event_supported(code, dev->swbit, SW_MAX) && - !!test_bit(code, dev->sw) != value) { + !!test_bit(code, dev->sw) != !!value) { __change_bit(code, dev->sw); disposition = INPUT_PASS_TO_HANDLERS; @@ -284,7 +323,7 @@ static void input_handle_event(struct input_dev *dev, case EV_LED: if (is_event_supported(code, dev->ledbit, LED_MAX) && - !!test_bit(code, dev->led) != value) { + !!test_bit(code, dev->led) != !!value) { __change_bit(code, dev->led); disposition = INPUT_PASS_TO_ALL; @@ -317,14 +356,48 @@ static void input_handle_event(struct input_dev *dev, break; } - if (disposition != INPUT_IGNORE_EVENT && type != EV_SYN) - dev->sync = false; + return disposition; +} + +static void input_handle_event(struct input_dev *dev, + unsigned int type, unsigned int code, int value) +{ + int disposition; + + disposition = input_get_disposition(dev, type, code, value); if ((disposition & INPUT_PASS_TO_DEVICE) && dev->event) dev->event(dev, type, code, value); - if (disposition & INPUT_PASS_TO_HANDLERS) - input_pass_event(dev, type, code, value); + if (!dev->vals) + return; + + if (disposition & INPUT_PASS_TO_HANDLERS) { + struct input_value *v; + + if (disposition & INPUT_SLOT) { + v = &dev->vals[dev->num_vals++]; + v->type = EV_ABS; + v->code = ABS_MT_SLOT; + v->value = dev->mt->slot; + } + + v = &dev->vals[dev->num_vals++]; + v->type = type; + v->code = code; + v->value = value; + } + + if (disposition & INPUT_FLUSH) { + if (dev->num_vals >= 2) + input_pass_values(dev, dev->vals, dev->num_vals); + dev->num_vals = 0; + } else if (dev->num_vals >= dev->max_vals - 2) { + dev->vals[dev->num_vals++] = input_value_sync; + input_pass_values(dev, dev->vals, dev->num_vals); + dev->num_vals = 0; + } + } /** @@ -352,7 +425,6 @@ void input_event(struct input_dev *dev, if (is_event_supported(type, dev->evbit, EV_MAX)) { spin_lock_irqsave(&dev->event_lock, flags); - add_input_randomness(type, code, value); input_handle_event(dev, type, code, value); spin_unlock_irqrestore(&dev->event_lock, flags); } @@ -831,10 +903,12 @@ int input_set_keycode(struct input_dev *dev, if (test_bit(EV_KEY, dev->evbit) && !is_event_supported(old_keycode, dev->keybit, KEY_MAX) && __test_and_clear_bit(old_keycode, dev->key)) { + struct input_value vals[] = { + { EV_KEY, old_keycode, 0 }, + input_value_sync + }; - input_pass_event(dev, EV_KEY, old_keycode, 0); - if (dev->sync) - input_pass_event(dev, EV_SYN, SYN_REPORT, 1); + input_pass_values(dev, vals, ARRAY_SIZE(vals)); } out: @@ -1416,6 +1490,7 @@ static void input_dev_release(struct device *device) input_ff_destroy(dev); input_mt_destroy_slots(dev); kfree(dev->absinfo); + kfree(dev->vals); kfree(dev); module_put(THIS_MODULE); @@ -1751,8 +1826,8 @@ static unsigned int input_estimate_events_per_packet(struct input_dev *dev) int i; unsigned int events; - if (dev->mtsize) { - mt_slots = dev->mtsize; + if (dev->mt) { + mt_slots = dev->mt->num_slots; } else if (test_bit(ABS_MT_TRACKING_ID, dev->absbit)) { mt_slots = dev->absinfo[ABS_MT_TRACKING_ID].maximum - dev->absinfo[ABS_MT_TRACKING_ID].minimum + 1, @@ -1778,6 +1853,9 @@ static unsigned int input_estimate_events_per_packet(struct input_dev *dev) if (test_bit(i, dev->relbit)) events++; + /* Make room for KEY and MSC events */ + events += 7; + return events; } @@ -1816,6 +1894,7 @@ int input_register_device(struct input_dev *dev) { static atomic_t input_no = ATOMIC_INIT(0); struct input_handler *handler; + unsigned int packet_size; const char *path; int error; @@ -1828,9 +1907,14 @@ int input_register_device(struct input_dev *dev) /* Make sure that bitmasks not mentioned in dev->evbit are clean. */ input_cleanse_bitmasks(dev); - if (!dev->hint_events_per_packet) - dev->hint_events_per_packet = - input_estimate_events_per_packet(dev); + packet_size = input_estimate_events_per_packet(dev); + if (dev->hint_events_per_packet < packet_size) + dev->hint_events_per_packet = packet_size; + + dev->max_vals = max(dev->hint_events_per_packet, packet_size) + 2; + dev->vals = kcalloc(dev->max_vals, sizeof(*dev->vals), GFP_KERNEL); + if (!dev->vals) + return -ENOMEM; /* * If delay and period are pre-set by the driver, then autorepeating diff --git a/drivers/input/misc/uinput.c b/drivers/input/misc/uinput.c index 736056897e5..6b1797503e3 100644 --- a/drivers/input/misc/uinput.c +++ b/drivers/input/misc/uinput.c @@ -405,7 +405,7 @@ static int uinput_setup_device(struct uinput_device *udev, const char __user *bu goto exit; if (test_bit(ABS_MT_SLOT, dev->absbit)) { int nslot = input_abs_get_max(dev, ABS_MT_SLOT) + 1; - input_mt_init_slots(dev, nslot); + input_mt_init_slots(dev, nslot, 0); } else if (test_bit(ABS_MT_POSITION_X, dev->absbit)) { input_set_events_per_packet(dev, 60); } diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c index 4a1347e91bd..cf5af1f495e 100644 --- a/drivers/input/mouse/alps.c +++ b/drivers/input/mouse/alps.c @@ -1620,7 +1620,7 @@ int alps_init(struct psmouse *psmouse) case ALPS_PROTO_V3: case ALPS_PROTO_V4: set_bit(INPUT_PROP_SEMI_MT, dev1->propbit); - input_mt_init_slots(dev1, 2); + input_mt_init_slots(dev1, 2, 0); input_set_abs_params(dev1, ABS_MT_POSITION_X, 0, ALPS_V3_X_MAX, 0, 0); input_set_abs_params(dev1, ABS_MT_POSITION_Y, 0, ALPS_V3_Y_MAX, 0, 0); diff --git a/drivers/input/mouse/bcm5974.c b/drivers/input/mouse/bcm5974.c index d528c23e194..3a78f235fa3 100644 --- a/drivers/input/mouse/bcm5974.c +++ b/drivers/input/mouse/bcm5974.c @@ -40,6 +40,7 @@ #include <linux/usb/input.h> #include <linux/hid.h> #include <linux/mutex.h> +#include <linux/input/mt.h> #define USB_VENDOR_ID_APPLE 0x05ac @@ -183,26 +184,26 @@ struct tp_finger { __le16 abs_y; /* absolute y coodinate */ __le16 rel_x; /* relative x coodinate */ __le16 rel_y; /* relative y coodinate */ - __le16 size_major; /* finger size, major axis? */ - __le16 size_minor; /* finger size, minor axis? */ + __le16 tool_major; /* tool area, major axis */ + __le16 tool_minor; /* tool area, minor axis */ __le16 orientation; /* 16384 when point, else 15 bit angle */ - __le16 force_major; /* trackpad force, major axis? */ - __le16 force_minor; /* trackpad force, minor axis? */ + __le16 touch_major; /* touch area, major axis */ + __le16 touch_minor; /* touch area, minor axis */ __le16 unused[3]; /* zeros */ __le16 multi; /* one finger: varies, more fingers: constant */ } __attribute__((packed,aligned(2))); /* trackpad finger data size, empirically at least ten fingers */ +#define MAX_FINGERS 16 #define SIZEOF_FINGER sizeof(struct tp_finger) -#define SIZEOF_ALL_FINGERS (16 * SIZEOF_FINGER) +#define SIZEOF_ALL_FINGERS (MAX_FINGERS * SIZEOF_FINGER) #define MAX_FINGER_ORIENTATION 16384 /* device-specific parameters */ struct bcm5974_param { - int dim; /* logical dimension */ - int fuzz; /* logical noise value */ - int devmin; /* device minimum reading */ - int devmax; /* device maximum reading */ + int snratio; /* signal-to-noise ratio */ + int min; /* device minimum reading */ + int max; /* device maximum reading */ }; /* device-specific configuration */ @@ -219,6 +220,7 @@ struct bcm5974_config { struct bcm5974_param w; /* finger width limits */ struct bcm5974_param x; /* horizontal limits */ struct bcm5974_param y; /* vertical limits */ + struct bcm5974_param o; /* orientation limits */ }; /* logical device structure */ @@ -234,23 +236,16 @@ struct bcm5974 { struct bt_data *bt_data; /* button transferred data */ struct urb *tp_urb; /* trackpad usb request block */ u8 *tp_data; /* trackpad transferred data */ - int fingers; /* number of fingers on trackpad */ + const struct tp_finger *index[MAX_FINGERS]; /* finger index data */ + struct input_mt_pos pos[MAX_FINGERS]; /* position array */ + int slots[MAX_FINGERS]; /* slot assignments */ }; -/* logical dimensions */ -#define DIM_PRESSURE 256 /* maximum finger pressure */ -#define DIM_WIDTH 16 /* maximum finger width */ -#define DIM_X 1280 /* maximum trackpad x value */ -#define DIM_Y 800 /* maximum trackpad y value */ - /* logical signal quality */ #define SN_PRESSURE 45 /* pressure signal-to-noise ratio */ -#define SN_WIDTH 100 /* width signal-to-noise ratio */ +#define SN_WIDTH 25 /* width signal-to-noise ratio */ #define SN_COORD 250 /* coordinate signal-to-noise ratio */ - -/* pressure thresholds */ -#define PRESSURE_LOW (2 * DIM_PRESSURE / SN_PRESSURE) -#define PRESSURE_HIGH (3 * PRESSURE_LOW) +#define SN_ORIENT 10 /* orientation signal-to-noise ratio */ /* device constants */ static const struct bcm5974_config bcm5974_config_table[] = { @@ -261,10 +256,11 @@ static const struct bcm5974_config bcm5974_config_table[] = { 0, 0x84, sizeof(struct bt_data), 0x81, TYPE1, FINGER_TYPE1, FINGER_TYPE1 + SIZEOF_ALL_FINGERS, - { DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 256 }, - { DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 }, - { DIM_X, DIM_X / SN_COORD, -4824, 5342 }, - { DIM_Y, DIM_Y / SN_COORD, -172, 5820 } + { SN_PRESSURE, 0, 256 }, + { SN_WIDTH, 0, 2048 }, + { SN_COORD, -4824, 5342 }, + { SN_COORD, -172, 5820 }, + { SN_ORIENT, -MAX_FINGER_ORIENTATION, MAX_FINGER_ORIENTATION } }, { USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI, @@ -273,10 +269,11 @@ static const struct bcm5974_config bcm5974_config_table[] = { 0, 0x84, sizeof(struct bt_data), 0x81, TYPE1, FINGER_TYPE1, FINGER_TYPE1 + SIZEOF_ALL_FINGERS, - { DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 256 }, - { DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 }, - { DIM_X, DIM_X / SN_COORD, -4824, 4824 }, - { DIM_Y, DIM_Y / SN_COORD, -172, 4290 } + { SN_PRESSURE, 0, 256 }, + { SN_WIDTH, 0, 2048 }, + { SN_COORD, -4824, 4824 }, + { SN_COORD, -172, 4290 }, + { SN_ORIENT, -MAX_FINGER_ORIENTATION, MAX_FINGER_ORIENTATION } }, { USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI, @@ -285,10 +282,11 @@ static const struct bcm5974_config bcm5974_config_table[] = { HAS_INTEGRATED_BUTTON, 0x84, sizeof(struct bt_data), 0x81, TYPE2, FINGER_TYPE2, FINGER_TYPE2 + SIZEOF_ALL_FINGERS, - { DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 300 }, - { DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 }, - { DIM_X, DIM_X / SN_COORD, -4460, 5166 }, - { DIM_Y, DIM_Y / SN_COORD, -75, 6700 } + { SN_PRESSURE, 0, 300 }, + { SN_WIDTH, 0, 2048 }, + { SN_COORD, -4460, 5166 }, + { SN_COORD, -75, 6700 }, + { SN_ORIENT, -MAX_FINGER_ORIENTATION, MAX_FINGER_ORIENTATION } }, { USB_DEVICE_ID_APPLE_WELLSPRING4_ANSI, @@ -297,10 +295,11 @@ static const struct bcm5974_config bcm5974_config_table[] = { HAS_INTEGRATED_BUTTON, 0x84, sizeof(struct bt_data), 0x81, TYPE2, FINGER_TYPE2, FINGER_TYPE2 + SIZEOF_ALL_FINGERS, - { DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 300 }, - { DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 }, - { DIM_X, DIM_X / SN_COORD, -4620, 5140 }, - { DIM_Y, DIM_Y / SN_COORD, -150, 6600 } + { SN_PRESSURE, 0, 300 }, + { SN_WIDTH, 0, 2048 }, + { SN_COORD, -4620, 5140 }, + { SN_COORD, -150, 6600 }, + { SN_ORIENT, -MAX_FINGER_ORIENTATION, MAX_FINGER_ORIENTATION } }, { USB_DEVICE_ID_APPLE_WELLSPRING4A_ANSI, @@ -309,10 +308,11 @@ static const struct bcm5974_config bcm5974_config_table[] = { HAS_INTEGRATED_BUTTON, 0x84, sizeof(struct bt_data), 0x81, TYPE2, FINGER_TYPE2, FINGER_TYPE2 + SIZEOF_ALL_FINGERS, - { DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 300 }, - { DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 }, - { DIM_X, DIM_X / SN_COORD, -4616, 5112 }, - { DIM_Y, DIM_Y / SN_COORD, -142, 5234 } + { SN_PRESSURE, 0, 300 }, + { SN_WIDTH, 0, 2048 }, + { SN_COORD, -4616, 5112 }, + { SN_COORD, -142, 5234 }, + { SN_ORIENT, -MAX_FINGER_ORIENTATION, MAX_FINGER_ORIENTATION } }, { USB_DEVICE_ID_APPLE_WELLSPRING5_ANSI, @@ -321,10 +321,11 @@ static const struct bcm5974_config bcm5974_config_table[] = { HAS_INTEGRATED_BUTTON, 0x84, sizeof(struct bt_data), 0x81, TYPE2, FINGER_TYPE2, FINGER_TYPE2 + SIZEOF_ALL_FINGERS, - { DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 300 }, - { DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 }, - { DIM_X, DIM_X / SN_COORD, -4415, 5050 }, - { DIM_Y, DIM_Y / SN_COORD, -55, 6680 } + { SN_PRESSURE, 0, 300 }, + { SN_WIDTH, 0, 2048 }, + { SN_COORD, -4415, 5050 }, + { SN_COORD, -55, 6680 }, + { SN_ORIENT, -MAX_FINGER_ORIENTATION, MAX_FINGER_ORIENTATION } }, { USB_DEVICE_ID_APPLE_WELLSPRING6_ANSI, @@ -333,10 +334,11 @@ static const struct bcm5974_config bcm5974_config_table[] = { HAS_INTEGRATED_BUTTON, 0x84, sizeof(struct bt_data), 0x81, TYPE2, FINGER_TYPE2, FINGER_TYPE2 + SIZEOF_ALL_FINGERS, - { DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 300 }, - { DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 }, - { DIM_X, DIM_X / SN_COORD, -4620, 5140 }, - { DIM_Y, DIM_Y / SN_COORD, -150, 6600 } + { SN_PRESSURE, 0, 300 }, + { SN_WIDTH, 0, 2048 }, + { SN_COORD, -4620, 5140 }, + { SN_COORD, -150, 6600 }, + { SN_ORIENT, -MAX_FINGER_ORIENTATION, MAX_FINGER_ORIENTATION } }, { USB_DEVICE_ID_APPLE_WELLSPRING5A_ANSI, @@ -345,10 +347,11 @@ static const struct bcm5974_config bcm5974_config_table[] = { HAS_INTEGRATED_BUTTON, 0x84, sizeof(struct bt_data), 0x81, TYPE2, FINGER_TYPE2, FINGER_TYPE2 + SIZEOF_ALL_FINGERS, - { DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 300 }, - { DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 }, - { DIM_X, DIM_X / SN_COORD, -4750, 5280 }, - { DIM_Y, DIM_Y / SN_COORD, -150, 6730 } + { SN_PRESSURE, 0, 300 }, + { SN_WIDTH, 0, 2048 }, + { SN_COORD, -4750, 5280 }, + { SN_COORD, -150, 6730 }, + { SN_ORIENT, -MAX_FINGER_ORIENTATION, MAX_FINGER_ORIENTATION } }, { USB_DEVICE_ID_APPLE_WELLSPRING6A_ANSI, @@ -357,10 +360,11 @@ static const struct bcm5974_config bcm5974_config_table[] = { HAS_INTEGRATED_BUTTON, 0x84, sizeof(struct bt_data), 0x81, TYPE2, FINGER_TYPE2, FINGER_TYPE2 + SIZEOF_ALL_FINGERS, - { DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 300 }, - { DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 }, - { DIM_X, DIM_X / SN_COORD, -4620, 5140 }, - { DIM_Y, DIM_Y / SN_COORD, -150, 6600 } + { SN_PRESSURE, 0, 300 }, + { SN_WIDTH, 0, 2048 }, + { SN_COORD, -4620, 5140 }, + { SN_COORD, -150, 6600 }, + { SN_ORIENT, -MAX_FINGER_ORIENTATION, MAX_FINGER_ORIENTATION } }, { USB_DEVICE_ID_APPLE_WELLSPRING7_ANSI, @@ -369,10 +373,11 @@ static const struct bcm5974_config bcm5974_config_table[] = { HAS_INTEGRATED_BUTTON, 0x84, sizeof(struct bt_data), 0x81, TYPE2, FINGER_TYPE2, FINGER_TYPE2 + SIZEOF_ALL_FINGERS, - { DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 300 }, - { DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 }, - { DIM_X, DIM_X / SN_COORD, -4750, 5280 }, - { DIM_Y, DIM_Y / SN_COORD, -150, 6730 } + { SN_PRESSURE, 0, 300 }, + { SN_WIDTH, 0, 2048 }, + { SN_COORD, -4750, 5280 }, + { SN_COORD, -150, 6730 }, + { SN_ORIENT, -MAX_FINGER_ORIENTATION, MAX_FINGER_ORIENTATION } }, {} }; @@ -396,18 +401,11 @@ static inline int raw2int(__le16 x) return (signed short)le16_to_cpu(x); } -/* scale device data to logical dimensions (asserts devmin < devmax) */ -static inline int int2scale(const struct bcm5974_param *p, int x) -{ - return x * p->dim / (p->devmax - p->devmin); -} - -/* all logical value ranges are [0,dim). */ -static inline int int2bound(const struct bcm5974_param *p, int x) +static void set_abs(struct input_dev *input, unsigned int code, + const struct bcm5974_param *p) { - int s = int2scale(p, x); - - return clamp_val(s, 0, p->dim - 1); + int fuzz = p->snratio ? (p->max - p->min) / p->snratio : 0; + input_set_abs_params(input, code, p->min, p->max, fuzz, 0); } /* setup which logical events to report */ @@ -416,48 +414,30 @@ static void setup_events_to_report(struct input_dev *input_dev, { __set_bit(EV_ABS, input_dev->evbit); - input_set_abs_params(input_dev, ABS_PRESSURE, - 0, cfg->p.dim, cfg->p.fuzz, 0); - input_set_abs_params(input_dev, ABS_TOOL_WIDTH, - 0, cfg->w.dim, cfg->w.fuzz, 0); - input_set_abs_params(input_dev, ABS_X, - 0, cfg->x.dim, cfg->x.fuzz, 0); - input_set_abs_params(input_dev, ABS_Y, - 0, cfg->y.dim, cfg->y.fuzz, 0); + /* for synaptics only */ + input_set_abs_params(input_dev, ABS_PRESSURE, 0, 256, 5, 0); + input_set_abs_params(input_dev, ABS_TOOL_WIDTH, 0, 16, 0, 0); /* finger touch area */ - input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, - cfg->w.devmin, cfg->w.devmax, 0, 0); - input_set_abs_params(input_dev, ABS_MT_TOUCH_MINOR, - cfg->w.devmin, cfg->w.devmax, 0, 0); + set_abs(input_dev, ABS_MT_TOUCH_MAJOR, &cfg->w); + set_abs(input_dev, ABS_MT_TOUCH_MINOR, &cfg->w); /* finger approach area */ - input_set_abs_params(input_dev, ABS_MT_WIDTH_MAJOR, - cfg->w.devmin, cfg->w.devmax, 0, 0); - input_set_abs_params(input_dev, ABS_MT_WIDTH_MINOR, - cfg->w.devmin, cfg->w.devmax, 0, 0); + set_abs(input_dev, ABS_MT_WIDTH_MAJOR, &cfg->w); + set_abs(input_dev, ABS_MT_WIDTH_MINOR, &cfg->w); /* finger orientation */ - input_set_abs_params(input_dev, ABS_MT_ORIENTATION, - -MAX_FINGER_ORIENTATION, - MAX_FINGER_ORIENTATION, 0, 0); + set_abs(input_dev, ABS_MT_ORIENTATION, &cfg->o); /* finger position */ - input_set_abs_params(input_dev, ABS_MT_POSITION_X, - cfg->x.devmin, cfg->x.devmax, 0, 0); - input_set_abs_params(input_dev, ABS_MT_POSITION_Y, - cfg->y.devmin, cfg->y.devmax, 0, 0); + set_abs(input_dev, ABS_MT_POSITION_X, &cfg->x); + set_abs(input_dev, ABS_MT_POSITION_Y, &cfg->y); __set_bit(EV_KEY, input_dev->evbit); - __set_bit(BTN_TOUCH, input_dev->keybit); - __set_bit(BTN_TOOL_FINGER, input_dev->keybit); - __set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit); - __set_bit(BTN_TOOL_TRIPLETAP, input_dev->keybit); - __set_bit(BTN_TOOL_QUADTAP, input_dev->keybit); __set_bit(BTN_LEFT, input_dev->keybit); - __set_bit(INPUT_PROP_POINTER, input_dev->propbit); if (cfg->caps & HAS_INTEGRATED_BUTTON) __set_bit(INPUT_PROP_BUTTONPAD, input_dev->propbit); - input_set_events_per_packet(input_dev, 60); + input_mt_init_slots(input_dev, MAX_FINGERS, + INPUT_MT_POINTER | INPUT_MT_DROP_UNUSED | INPUT_MT_TRACK); } /* report button data as logical button state */ @@ -477,24 +457,44 @@ static int report_bt_state(struct bcm5974 *dev, int size) return 0; } -static void report_finger_data(struct input_dev *input, - const struct bcm5974_config *cfg, +static void report_finger_data(struct input_dev *input, int slot, + const struct input_mt_pos *pos, const struct tp_finger *f) { + input_mt_slot(input, slot); + input_mt_report_slot_state(input, MT_TOOL_FINGER, true); + input_report_abs(input, ABS_MT_TOUCH_MAJOR, - raw2int(f->force_major) << 1); + raw2int(f->touch_major) << 1); input_report_abs(input, ABS_MT_TOUCH_MINOR, - raw2int(f->force_minor) << 1); + raw2int(f->touch_minor) << 1); input_report_abs(input, ABS_MT_WIDTH_MAJOR, - raw2int(f->size_major) << 1); + raw2int(f->tool_major) << 1); input_report_abs(input, ABS_MT_WIDTH_MINOR, - raw2int(f->size_minor) << 1); + raw2int(f->tool_minor) << 1); input_report_abs(input, ABS_MT_ORIENTATION, MAX_FINGER_ORIENTATION - raw2int(f->orientation)); - input_report_abs(input, ABS_MT_POSITION_X, raw2int(f->abs_x)); - input_report_abs(input, ABS_MT_POSITION_Y, - cfg->y.devmin + cfg->y.devmax - raw2int(f->abs_y)); - input_mt_sync(input); + input_report_abs(input, ABS_MT_POSITION_X, pos->x); + input_report_abs(input, ABS_MT_POSITION_Y, pos->y); +} + +static void report_synaptics_data(struct input_dev *input, + const struct bcm5974_config *cfg, + const struct tp_finger *f, int raw_n) +{ + int abs_p = 0, abs_w = 0; + + if (raw_n) { + int p = raw2int(f->touch_major); + int w = raw2int(f->tool_major); + if (p > 0 && raw2int(f->origin)) { + abs_p = clamp_val(256 * p / cfg->p.max, 0, 255); + abs_w = clamp_val(16 * w / cfg->w.max, 0, 15); + } + } + + input_report_abs(input, ABS_PRESSURE, abs_p); + input_report_abs(input, ABS_TOOL_WIDTH, abs_w); } /* report trackpad data as logical trackpad state */ @@ -503,9 +503,7 @@ static int report_tp_state(struct bcm5974 *dev, int size) const struct bcm5974_config *c = &dev->cfg; const struct tp_finger *f; struct input_dev *input = dev->input; - int raw_p, raw_w, raw_x, raw_y, raw_n, i; - int ptest, origin, ibt = 0, nmin = 0, nmax = 0; - int abs_p = 0, abs_w = 0, abs_x = 0, abs_y = 0; + int raw_n, i, n = 0; if (size < c->tp_offset || (size - c->tp_offset) % SIZEOF_FINGER != 0) return -EIO; @@ -514,76 +512,29 @@ static int report_tp_state(struct bcm5974 *dev, int size) f = (const struct tp_finger *)(dev->tp_data + c->tp_offset); raw_n = (size - c->tp_offset) / SIZEOF_FINGER; - /* always track the first finger; when detached, start over */ - if (raw_n) { - - /* report raw trackpad data */ - for (i = 0; i < raw_n; i++) - report_finger_data(input, c, &f[i]); - - raw_p = raw2int(f->force_major); - raw_w = raw2int(f->size_major); - raw_x = raw2int(f->abs_x); - raw_y = raw2int(f->abs_y); - - dprintk(9, - "bcm5974: " - "raw: p: %+05d w: %+05d x: %+05d y: %+05d n: %d\n", - raw_p, raw_w, raw_x, raw_y, raw_n); - - ptest = int2bound(&c->p, raw_p); - origin = raw2int(f->origin); - - /* while tracking finger still valid, count all fingers */ - if (ptest > PRESSURE_LOW && origin) { - abs_p = ptest; - abs_w = int2bound(&c->w, raw_w); - abs_x = int2bound(&c->x, raw_x - c->x.devmin); - abs_y = int2bound(&c->y, c->y.devmax - raw_y); - while (raw_n--) { - ptest = int2bound(&c->p, - raw2int(f->force_major)); - if (ptest > PRESSURE_LOW) - nmax++; - if (ptest > PRESSURE_HIGH) - nmin++; - f++; - } - } + for (i = 0; i < raw_n; i++) { + if (raw2int(f[i].touch_major) == 0) + continue; + dev->pos[n].x = raw2int(f[i].abs_x); + dev->pos[n].y = c->y.min + c->y.max - raw2int(f[i].abs_y); + dev->index[n++] = &f[i]; } - /* set the integrated button if applicable */ - if (c->tp_type == TYPE2) - ibt = raw2int(dev->tp_data[BUTTON_TYPE2]); - - if (dev->fingers < nmin) - dev->fingers = nmin; - if (dev->fingers > nmax) - dev->fingers = nmax; - - input_report_key(input, BTN_TOUCH, dev->fingers > 0); - input_report_key(input, BTN_TOOL_FINGER, dev->fingers == 1); - input_report_key(input, BTN_TOOL_DOUBLETAP, dev->fingers == 2); - input_report_key(input, BTN_TOOL_TRIPLETAP, dev->fingers == 3); - input_report_key(input, BTN_TOOL_QUADTAP, dev->fingers > 3); - - input_report_abs(input, ABS_PRESSURE, abs_p); - input_report_abs(input, ABS_TOOL_WIDTH, abs_w); + input_mt_assign_slots(input, dev->slots, dev->pos, n); - if (abs_p) { - input_report_abs(input, ABS_X, abs_x); - input_report_abs(input, ABS_Y, abs_y); + for (i = 0; i < n; i++) + report_finger_data(input, dev->slots[i], + &dev->pos[i], dev->index[i]); - dprintk(8, - "bcm5974: abs: p: %+05d w: %+05d x: %+05d y: %+05d " - "nmin: %d nmax: %d n: %d ibt: %d\n", abs_p, abs_w, - abs_x, abs_y, nmin, nmax, dev->fingers, ibt); + input_mt_sync_frame(input); - } + report_synaptics_data(input, c, f, raw_n); /* type 2 reports button events via ibt only */ - if (c->tp_type == TYPE2) + if (c->tp_type == TYPE2) { + int ibt = raw2int(dev->tp_data[BUTTON_TYPE2]); input_report_key(input, BTN_LEFT, ibt); + } input_sync(input); @@ -742,9 +693,11 @@ static int bcm5974_start_traffic(struct bcm5974 *dev) goto err_out; } - error = usb_submit_urb(dev->bt_urb, GFP_KERNEL); - if (error) - goto err_reset_mode; + if (dev->bt_urb) { + error = usb_submit_urb(dev->bt_urb, GFP_KERNEL); + if (error) + goto err_reset_mode; + } error = usb_submit_urb(dev->tp_urb, GFP_KERNEL); if (error) @@ -868,19 +821,23 @@ static int bcm5974_probe(struct usb_interface *iface, mutex_init(&dev->pm_mutex); /* setup urbs */ - dev->bt_urb = usb_alloc_urb(0, GFP_KERNEL); - if (!dev->bt_urb) - goto err_free_devs; + if (cfg->tp_type == TYPE1) { + dev->bt_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!dev->bt_urb) + goto err_free_devs; + } dev->tp_urb = usb_alloc_urb(0, GFP_KERNEL); if (!dev->tp_urb) goto err_free_bt_urb; - dev->bt_data = usb_alloc_coherent(dev->udev, + if (dev->bt_urb) { + dev->bt_data = usb_alloc_coherent(dev->udev, dev->cfg.bt_datalen, GFP_KERNEL, &dev->bt_urb->transfer_dma); - if (!dev->bt_data) - goto err_free_urb; + if (!dev->bt_data) + goto err_free_urb; + } dev->tp_data = usb_alloc_coherent(dev->udev, dev->cfg.tp_datalen, GFP_KERNEL, @@ -888,10 +845,11 @@ static int bcm5974_probe(struct usb_interface *iface, if (!dev->tp_data) goto err_free_bt_buffer; - usb_fill_int_urb(dev->bt_urb, udev, - usb_rcvintpipe(udev, cfg->bt_ep), - dev->bt_data, dev->cfg.bt_datalen, - bcm5974_irq_button, dev, 1); + if (dev->bt_urb) + usb_fill_int_urb(dev->bt_urb, udev, + usb_rcvintpipe(udev, cfg->bt_ep), + dev->bt_data, dev->cfg.bt_datalen, + bcm5974_irq_button, dev, 1); usb_fill_int_urb(dev->tp_urb, udev, usb_rcvintpipe(udev, cfg->tp_ep), @@ -929,8 +887,9 @@ err_free_buffer: usb_free_coherent(dev->udev, dev->cfg.tp_datalen, dev->tp_data, dev->tp_urb->transfer_dma); err_free_bt_buffer: - usb_free_coherent(dev->udev, dev->cfg.bt_datalen, - dev->bt_data, dev->bt_urb->transfer_dma); + if (dev->bt_urb) + usb_free_coherent(dev->udev, dev->cfg.bt_datalen, + dev->bt_data, dev->bt_urb->transfer_dma); err_free_urb: usb_free_urb(dev->tp_urb); err_free_bt_urb: @@ -951,8 +910,9 @@ static void bcm5974_disconnect(struct usb_interface *iface) input_unregister_device(dev->input); usb_free_coherent(dev->udev, dev->cfg.tp_datalen, dev->tp_data, dev->tp_urb->transfer_dma); - usb_free_coherent(dev->udev, dev->cfg.bt_datalen, - dev->bt_data, dev->bt_urb->transfer_dma); + if (dev->bt_urb) + usb_free_coherent(dev->udev, dev->cfg.bt_datalen, + dev->bt_data, dev->bt_urb->transfer_dma); usb_free_urb(dev->tp_urb); usb_free_urb(dev->bt_urb); kfree(dev); diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c index 479011004a1..1e8e42fb03a 100644 --- a/drivers/input/mouse/elantech.c +++ b/drivers/input/mouse/elantech.c @@ -1004,7 +1004,7 @@ static int elantech_set_input_params(struct psmouse *psmouse) input_set_abs_params(dev, ABS_TOOL_WIDTH, ETP_WMIN_V2, ETP_WMAX_V2, 0, 0); } - input_mt_init_slots(dev, 2); + input_mt_init_slots(dev, 2, 0); input_set_abs_params(dev, ABS_MT_POSITION_X, x_min, x_max, 0, 0); input_set_abs_params(dev, ABS_MT_POSITION_Y, y_min, y_max, 0, 0); break; @@ -1035,7 +1035,7 @@ static int elantech_set_input_params(struct psmouse *psmouse) input_set_abs_params(dev, ABS_TOOL_WIDTH, ETP_WMIN_V2, ETP_WMAX_V2, 0, 0); /* Multitouch capable pad, up to 5 fingers. */ - input_mt_init_slots(dev, ETP_MAX_FINGERS); + input_mt_init_slots(dev, ETP_MAX_FINGERS, 0); input_set_abs_params(dev, ABS_MT_POSITION_X, x_min, x_max, 0, 0); input_set_abs_params(dev, ABS_MT_POSITION_Y, y_min, y_max, 0, 0); input_abs_set_res(dev, ABS_MT_POSITION_X, x_res); diff --git a/drivers/input/mouse/sentelic.c b/drivers/input/mouse/sentelic.c index a261d857691..e582922bacf 100644 --- a/drivers/input/mouse/sentelic.c +++ b/drivers/input/mouse/sentelic.c @@ -971,7 +971,7 @@ static int fsp_set_input_params(struct psmouse *psmouse) input_set_abs_params(dev, ABS_X, 0, abs_x, 0, 0); input_set_abs_params(dev, ABS_Y, 0, abs_y, 0, 0); - input_mt_init_slots(dev, 2); + input_mt_init_slots(dev, 2, 0); input_set_abs_params(dev, ABS_MT_POSITION_X, 0, abs_x, 0, 0); input_set_abs_params(dev, ABS_MT_POSITION_Y, 0, abs_y, 0, 0); } diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c index 14eaecea2b7..37033ade79d 100644 --- a/drivers/input/mouse/synaptics.c +++ b/drivers/input/mouse/synaptics.c @@ -1232,7 +1232,7 @@ static void set_input_params(struct input_dev *dev, struct synaptics_data *priv) input_set_abs_params(dev, ABS_PRESSURE, 0, 255, 0, 0); if (SYN_CAP_IMAGE_SENSOR(priv->ext_cap_0c)) { - input_mt_init_slots(dev, 2); + input_mt_init_slots(dev, 2, 0); set_abs_position_params(dev, priv, ABS_MT_POSITION_X, ABS_MT_POSITION_Y); /* Image sensors can report per-contact pressure */ @@ -1244,7 +1244,7 @@ static void set_input_params(struct input_dev *dev, struct synaptics_data *priv) } else if (SYN_CAP_ADV_GESTURE(priv->ext_cap_0c)) { /* Non-image sensors with AGM use semi-mt */ __set_bit(INPUT_PROP_SEMI_MT, dev->propbit); - input_mt_init_slots(dev, 2); + input_mt_init_slots(dev, 2, 0); set_abs_position_params(dev, priv, ABS_MT_POSITION_X, ABS_MT_POSITION_Y); } diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c index 532d067a9e0..2a81ce375f7 100644 --- a/drivers/input/tablet/wacom_wac.c +++ b/drivers/input/tablet/wacom_wac.c @@ -1530,7 +1530,7 @@ int wacom_setup_input_capabilities(struct input_dev *input_dev, __set_bit(BTN_TOOL_TRIPLETAP, input_dev->keybit); __set_bit(BTN_TOOL_QUADTAP, input_dev->keybit); - input_mt_init_slots(input_dev, features->touch_max); + input_mt_init_slots(input_dev, features->touch_max, 0); input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0); @@ -1575,7 +1575,7 @@ int wacom_setup_input_capabilities(struct input_dev *input_dev, case TABLETPC2FG: if (features->device_type == BTN_TOOL_FINGER) { - input_mt_init_slots(input_dev, features->touch_max); + input_mt_init_slots(input_dev, features->touch_max, 0); input_set_abs_params(input_dev, ABS_MT_TOOL_TYPE, 0, MT_TOOL_MAX, 0, 0); input_set_abs_params(input_dev, ABS_MT_POSITION_X, @@ -1631,7 +1631,7 @@ int wacom_setup_input_capabilities(struct input_dev *input_dev, __set_bit(BTN_TOOL_FINGER, input_dev->keybit); __set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit); - input_mt_init_slots(input_dev, features->touch_max); + input_mt_init_slots(input_dev, features->touch_max, 0); if (features->pktlen == WACOM_PKGLEN_BBTOUCH3) { __set_bit(BTN_TOOL_TRIPLETAP, diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c index 4623cc69fc6..e92615d0b1b 100644 --- a/drivers/input/touchscreen/atmel_mxt_ts.c +++ b/drivers/input/touchscreen/atmel_mxt_ts.c @@ -1152,7 +1152,7 @@ static int __devinit mxt_probe(struct i2c_client *client, /* For multi touch */ num_mt_slots = data->T9_reportid_max - data->T9_reportid_min + 1; - error = input_mt_init_slots(input_dev, num_mt_slots); + error = input_mt_init_slots(input_dev, num_mt_slots, 0); if (error) goto err_free_object; input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, diff --git a/drivers/input/touchscreen/cyttsp_core.c b/drivers/input/touchscreen/cyttsp_core.c index f030d9ec795..8e60437ac85 100644 --- a/drivers/input/touchscreen/cyttsp_core.c +++ b/drivers/input/touchscreen/cyttsp_core.c @@ -571,7 +571,7 @@ struct cyttsp *cyttsp_probe(const struct cyttsp_bus_ops *bus_ops, input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0, CY_MAXZ, 0, 0); - input_mt_init_slots(input_dev, CY_MAX_ID); + input_mt_init_slots(input_dev, CY_MAX_ID, 0); error = request_threaded_irq(ts->irq, NULL, cyttsp_irq, IRQF_TRIGGER_FALLING | IRQF_ONESHOT, diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c index 64957770b52..099d144ab7c 100644 --- a/drivers/input/touchscreen/edt-ft5x06.c +++ b/drivers/input/touchscreen/edt-ft5x06.c @@ -782,7 +782,7 @@ static int __devinit edt_ft5x06_ts_probe(struct i2c_client *client, 0, tsdata->num_x * 64 - 1, 0, 0); input_set_abs_params(input, ABS_MT_POSITION_Y, 0, tsdata->num_y * 64 - 1, 0, 0); - error = input_mt_init_slots(input, MAX_SUPPORT_POINTS); + error = input_mt_init_slots(input, MAX_SUPPORT_POINTS, 0); if (error) { dev_err(&client->dev, "Unable to init MT slots.\n"); goto err_free_mem; diff --git a/drivers/input/touchscreen/egalax_ts.c b/drivers/input/touchscreen/egalax_ts.c index 70524dd34f4..c1e3460f119 100644 --- a/drivers/input/touchscreen/egalax_ts.c +++ b/drivers/input/touchscreen/egalax_ts.c @@ -204,7 +204,7 @@ static int __devinit egalax_ts_probe(struct i2c_client *client, ABS_MT_POSITION_X, 0, EGALAX_MAX_X, 0, 0); input_set_abs_params(input_dev, ABS_MT_POSITION_X, 0, EGALAX_MAX_Y, 0, 0); - input_mt_init_slots(input_dev, MAX_SUPPORT_POINTS); + input_mt_init_slots(input_dev, MAX_SUPPORT_POINTS, 0); input_set_drvdata(input_dev, ts); diff --git a/drivers/input/touchscreen/ili210x.c b/drivers/input/touchscreen/ili210x.c index c0044175a92..4ac69760ec0 100644 --- a/drivers/input/touchscreen/ili210x.c +++ b/drivers/input/touchscreen/ili210x.c @@ -252,7 +252,7 @@ static int __devinit ili210x_i2c_probe(struct i2c_client *client, input_set_abs_params(input, ABS_Y, 0, ymax, 0, 0); /* Multi touch */ - input_mt_init_slots(input, MAX_TOUCHES); + input_mt_init_slots(input, MAX_TOUCHES, 0); input_set_abs_params(input, ABS_MT_POSITION_X, 0, xmax, 0, 0); input_set_abs_params(input, ABS_MT_POSITION_Y, 0, ymax, 0, 0); diff --git a/drivers/input/touchscreen/mms114.c b/drivers/input/touchscreen/mms114.c index 49c44bbf548..560cf09d1c5 100644 --- a/drivers/input/touchscreen/mms114.c +++ b/drivers/input/touchscreen/mms114.c @@ -404,7 +404,7 @@ static int __devinit mms114_probe(struct i2c_client *client, input_set_abs_params(input_dev, ABS_Y, 0, data->pdata->y_size, 0, 0); /* For multi touch */ - input_mt_init_slots(input_dev, MMS114_MAX_TOUCH); + input_mt_init_slots(input_dev, MMS114_MAX_TOUCH, 0); input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0, MMS114_MAX_AREA, 0, 0); input_set_abs_params(input_dev, ABS_MT_POSITION_X, diff --git a/drivers/input/touchscreen/penmount.c b/drivers/input/touchscreen/penmount.c index 4ccde45b9da..b49f0b83692 100644 --- a/drivers/input/touchscreen/penmount.c +++ b/drivers/input/touchscreen/penmount.c @@ -264,7 +264,7 @@ static int pm_connect(struct serio *serio, struct serio_driver *drv) input_set_abs_params(pm->dev, ABS_Y, 0, max_y, 0, 0); if (pm->maxcontacts > 1) { - input_mt_init_slots(pm->dev, pm->maxcontacts); + input_mt_init_slots(pm->dev, pm->maxcontacts, 0); input_set_abs_params(pm->dev, ABS_MT_POSITION_X, 0, max_x, 0, 0); input_set_abs_params(pm->dev, diff --git a/drivers/input/touchscreen/wacom_w8001.c b/drivers/input/touchscreen/wacom_w8001.c index 8f9ad2f893b..9a83be6b658 100644 --- a/drivers/input/touchscreen/wacom_w8001.c +++ b/drivers/input/touchscreen/wacom_w8001.c @@ -471,7 +471,7 @@ static int w8001_setup(struct w8001 *w8001) case 5: w8001->pktlen = W8001_PKTLEN_TOUCH2FG; - input_mt_init_slots(dev, 2); + input_mt_init_slots(dev, 2, 0); input_set_abs_params(dev, ABS_MT_POSITION_X, 0, touch.x, 0, 0); input_set_abs_params(dev, ABS_MT_POSITION_Y, diff --git a/drivers/iommu/amd_iommu.c b/drivers/iommu/amd_iommu.c index b64502dfa9f..e89daf1b21b 100644 --- a/drivers/iommu/amd_iommu.c +++ b/drivers/iommu/amd_iommu.c @@ -266,7 +266,7 @@ static void swap_pci_ref(struct pci_dev **from, struct pci_dev *to) static int iommu_init_device(struct device *dev) { - struct pci_dev *dma_pdev, *pdev = to_pci_dev(dev); + struct pci_dev *dma_pdev = NULL, *pdev = to_pci_dev(dev); struct iommu_dev_data *dev_data; struct iommu_group *group; u16 alias; @@ -293,7 +293,9 @@ static int iommu_init_device(struct device *dev) dev_data->alias_data = alias_data; dma_pdev = pci_get_bus_and_slot(alias >> 8, alias & 0xff); - } else + } + + if (dma_pdev == NULL) dma_pdev = pci_dev_get(pdev); /* Account for quirked devices */ diff --git a/drivers/lguest/x86/core.c b/drivers/lguest/x86/core.c index 39809035320..4af12e1844d 100644 --- a/drivers/lguest/x86/core.c +++ b/drivers/lguest/x86/core.c @@ -203,8 +203,8 @@ void lguest_arch_run_guest(struct lg_cpu *cpu) * we set it now, so we can trap and pass that trap to the Guest if it * uses the FPU. */ - if (cpu->ts) - unlazy_fpu(current); + if (cpu->ts && user_has_fpu()) + stts(); /* * SYSENTER is an optimized way of doing system calls. We can't allow @@ -234,6 +234,10 @@ void lguest_arch_run_guest(struct lg_cpu *cpu) if (boot_cpu_has(X86_FEATURE_SEP)) wrmsr(MSR_IA32_SYSENTER_CS, __KERNEL_CS, 0); + /* Clear the host TS bit if it was set above. */ + if (cpu->ts && user_has_fpu()) + clts(); + /* * If the Guest page faulted, then the cr2 register will tell us the * bad virtual address. We have to grab this now, because once we @@ -249,7 +253,7 @@ void lguest_arch_run_guest(struct lg_cpu *cpu) * a different CPU. So all the critical stuff should be done * before this. */ - else if (cpu->regs->trapnum == 7) + else if (cpu->regs->trapnum == 7 && !user_has_fpu()) math_state_restore(); } diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c index d8abb90a6c2..034233eefc8 100644 --- a/drivers/md/dm-mpath.c +++ b/drivers/md/dm-mpath.c @@ -1555,6 +1555,7 @@ static int multipath_ioctl(struct dm_target *ti, unsigned int cmd, unsigned long arg) { struct multipath *m = ti->private; + struct pgpath *pgpath; struct block_device *bdev; fmode_t mode; unsigned long flags; @@ -1570,12 +1571,14 @@ again: if (!m->current_pgpath) __choose_pgpath(m, 0); - if (m->current_pgpath) { - bdev = m->current_pgpath->path.dev->bdev; - mode = m->current_pgpath->path.dev->mode; + pgpath = m->current_pgpath; + + if (pgpath) { + bdev = pgpath->path.dev->bdev; + mode = pgpath->path.dev->mode; } - if (m->queue_io) + if ((pgpath && m->queue_io) || (!pgpath && m->queue_if_no_path)) r = -EAGAIN; else if (!bdev) r = -EIO; diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c index f90069029aa..100368eb799 100644 --- a/drivers/md/dm-table.c +++ b/drivers/md/dm-table.c @@ -1212,6 +1212,41 @@ struct dm_target *dm_table_find_target(struct dm_table *t, sector_t sector) return &t->targets[(KEYS_PER_NODE * n) + k]; } +static int count_device(struct dm_target *ti, struct dm_dev *dev, + sector_t start, sector_t len, void *data) +{ + unsigned *num_devices = data; + + (*num_devices)++; + + return 0; +} + +/* + * Check whether a table has no data devices attached using each + * target's iterate_devices method. + * Returns false if the result is unknown because a target doesn't + * support iterate_devices. + */ +bool dm_table_has_no_data_devices(struct dm_table *table) +{ + struct dm_target *uninitialized_var(ti); + unsigned i = 0, num_devices = 0; + + while (i < dm_table_get_num_targets(table)) { + ti = dm_table_get_target(table, i++); + + if (!ti->type->iterate_devices) + return false; + + ti->type->iterate_devices(ti, count_device, &num_devices); + if (num_devices) + return false; + } + + return true; +} + /* * Establish the new table's queue_limits and validate them. */ @@ -1354,17 +1389,25 @@ static int device_is_nonrot(struct dm_target *ti, struct dm_dev *dev, return q && blk_queue_nonrot(q); } -static bool dm_table_is_nonrot(struct dm_table *t) +static int device_is_not_random(struct dm_target *ti, struct dm_dev *dev, + sector_t start, sector_t len, void *data) +{ + struct request_queue *q = bdev_get_queue(dev->bdev); + + return q && !blk_queue_add_random(q); +} + +static bool dm_table_all_devices_attribute(struct dm_table *t, + iterate_devices_callout_fn func) { struct dm_target *ti; unsigned i = 0; - /* Ensure that all underlying device are non-rotational. */ while (i < dm_table_get_num_targets(t)) { ti = dm_table_get_target(t, i++); if (!ti->type->iterate_devices || - !ti->type->iterate_devices(ti, device_is_nonrot, NULL)) + !ti->type->iterate_devices(ti, func, NULL)) return 0; } @@ -1396,7 +1439,8 @@ void dm_table_set_restrictions(struct dm_table *t, struct request_queue *q, if (!dm_table_discard_zeroes_data(t)) q->limits.discard_zeroes_data = 0; - if (dm_table_is_nonrot(t)) + /* Ensure that all underlying devices are non-rotational. */ + if (dm_table_all_devices_attribute(t, device_is_nonrot)) queue_flag_set_unlocked(QUEUE_FLAG_NONROT, q); else queue_flag_clear_unlocked(QUEUE_FLAG_NONROT, q); @@ -1404,6 +1448,15 @@ void dm_table_set_restrictions(struct dm_table *t, struct request_queue *q, dm_table_set_integrity(t); /* + * Determine whether or not this queue's I/O timings contribute + * to the entropy pool, Only request-based targets use this. + * Clear QUEUE_FLAG_ADD_RANDOM if any underlying device does not + * have it set. + */ + if (blk_queue_add_random(q) && dm_table_all_devices_attribute(t, device_is_not_random)) + queue_flag_clear_unlocked(QUEUE_FLAG_ADD_RANDOM, q); + + /* * QUEUE_FLAG_STACKABLE must be set after all queue settings are * visible to other CPUs because, once the flag is set, incoming bios * are processed by request-based dm, which refers to the queue diff --git a/drivers/md/dm-thin.c b/drivers/md/dm-thin.c index af1fc3b2c2a..c29410af1e2 100644 --- a/drivers/md/dm-thin.c +++ b/drivers/md/dm-thin.c @@ -509,9 +509,9 @@ enum pool_mode { struct pool_features { enum pool_mode mode; - unsigned zero_new_blocks:1; - unsigned discard_enabled:1; - unsigned discard_passdown:1; + bool zero_new_blocks:1; + bool discard_enabled:1; + bool discard_passdown:1; }; struct thin_c; @@ -580,7 +580,8 @@ struct pool_c { struct dm_target_callbacks callbacks; dm_block_t low_water_blocks; - struct pool_features pf; + struct pool_features requested_pf; /* Features requested during table load */ + struct pool_features adjusted_pf; /* Features used after adjusting for constituent devices */ }; /* @@ -1839,6 +1840,47 @@ static void __requeue_bios(struct pool *pool) /*---------------------------------------------------------------- * Binding of control targets to a pool object *--------------------------------------------------------------*/ +static bool data_dev_supports_discard(struct pool_c *pt) +{ + struct request_queue *q = bdev_get_queue(pt->data_dev->bdev); + + return q && blk_queue_discard(q); +} + +/* + * If discard_passdown was enabled verify that the data device + * supports discards. Disable discard_passdown if not. + */ +static void disable_passdown_if_not_supported(struct pool_c *pt) +{ + struct pool *pool = pt->pool; + struct block_device *data_bdev = pt->data_dev->bdev; + struct queue_limits *data_limits = &bdev_get_queue(data_bdev)->limits; + sector_t block_size = pool->sectors_per_block << SECTOR_SHIFT; + const char *reason = NULL; + char buf[BDEVNAME_SIZE]; + + if (!pt->adjusted_pf.discard_passdown) + return; + + if (!data_dev_supports_discard(pt)) + reason = "discard unsupported"; + + else if (data_limits->max_discard_sectors < pool->sectors_per_block) + reason = "max discard sectors smaller than a block"; + + else if (data_limits->discard_granularity > block_size) + reason = "discard granularity larger than a block"; + + else if (block_size & (data_limits->discard_granularity - 1)) + reason = "discard granularity not a factor of block size"; + + if (reason) { + DMWARN("Data device (%s) %s: Disabling discard passdown.", bdevname(data_bdev, buf), reason); + pt->adjusted_pf.discard_passdown = false; + } +} + static int bind_control_target(struct pool *pool, struct dm_target *ti) { struct pool_c *pt = ti->private; @@ -1847,31 +1889,16 @@ static int bind_control_target(struct pool *pool, struct dm_target *ti) * We want to make sure that degraded pools are never upgraded. */ enum pool_mode old_mode = pool->pf.mode; - enum pool_mode new_mode = pt->pf.mode; + enum pool_mode new_mode = pt->adjusted_pf.mode; if (old_mode > new_mode) new_mode = old_mode; pool->ti = ti; pool->low_water_blocks = pt->low_water_blocks; - pool->pf = pt->pf; - set_pool_mode(pool, new_mode); + pool->pf = pt->adjusted_pf; - /* - * If discard_passdown was enabled verify that the data device - * supports discards. Disable discard_passdown if not; otherwise - * -EOPNOTSUPP will be returned. - */ - /* FIXME: pull this out into a sep fn. */ - if (pt->pf.discard_passdown) { - struct request_queue *q = bdev_get_queue(pt->data_dev->bdev); - if (!q || !blk_queue_discard(q)) { - char buf[BDEVNAME_SIZE]; - DMWARN("Discard unsupported by data device (%s): Disabling discard passdown.", - bdevname(pt->data_dev->bdev, buf)); - pool->pf.discard_passdown = 0; - } - } + set_pool_mode(pool, new_mode); return 0; } @@ -1889,9 +1916,9 @@ static void unbind_control_target(struct pool *pool, struct dm_target *ti) static void pool_features_init(struct pool_features *pf) { pf->mode = PM_WRITE; - pf->zero_new_blocks = 1; - pf->discard_enabled = 1; - pf->discard_passdown = 1; + pf->zero_new_blocks = true; + pf->discard_enabled = true; + pf->discard_passdown = true; } static void __pool_destroy(struct pool *pool) @@ -2119,13 +2146,13 @@ static int parse_pool_features(struct dm_arg_set *as, struct pool_features *pf, argc--; if (!strcasecmp(arg_name, "skip_block_zeroing")) - pf->zero_new_blocks = 0; + pf->zero_new_blocks = false; else if (!strcasecmp(arg_name, "ignore_discard")) - pf->discard_enabled = 0; + pf->discard_enabled = false; else if (!strcasecmp(arg_name, "no_discard_passdown")) - pf->discard_passdown = 0; + pf->discard_passdown = false; else if (!strcasecmp(arg_name, "read_only")) pf->mode = PM_READ_ONLY; @@ -2259,8 +2286,9 @@ static int pool_ctr(struct dm_target *ti, unsigned argc, char **argv) pt->metadata_dev = metadata_dev; pt->data_dev = data_dev; pt->low_water_blocks = low_water_blocks; - pt->pf = pf; + pt->adjusted_pf = pt->requested_pf = pf; ti->num_flush_requests = 1; + /* * Only need to enable discards if the pool should pass * them down to the data device. The thin device's discard @@ -2268,12 +2296,14 @@ static int pool_ctr(struct dm_target *ti, unsigned argc, char **argv) */ if (pf.discard_enabled && pf.discard_passdown) { ti->num_discard_requests = 1; + /* * Setting 'discards_supported' circumvents the normal * stacking of discard limits (this keeps the pool and * thin devices' discard limits consistent). */ ti->discards_supported = true; + ti->discard_zeroes_data_unsupported = true; } ti->private = pt; @@ -2703,7 +2733,7 @@ static int pool_status(struct dm_target *ti, status_type_t type, format_dev_t(buf2, pt->data_dev->bdev->bd_dev), (unsigned long)pool->sectors_per_block, (unsigned long long)pt->low_water_blocks); - emit_flags(&pt->pf, result, sz, maxlen); + emit_flags(&pt->requested_pf, result, sz, maxlen); break; } @@ -2732,20 +2762,21 @@ static int pool_merge(struct dm_target *ti, struct bvec_merge_data *bvm, return min(max_size, q->merge_bvec_fn(q, bvm, biovec)); } -static void set_discard_limits(struct pool *pool, struct queue_limits *limits) +static void set_discard_limits(struct pool_c *pt, struct queue_limits *limits) { - /* - * FIXME: these limits may be incompatible with the pool's data device - */ + struct pool *pool = pt->pool; + struct queue_limits *data_limits; + limits->max_discard_sectors = pool->sectors_per_block; /* - * This is just a hint, and not enforced. We have to cope with - * bios that cover a block partially. A discard that spans a block - * boundary is not sent to this target. + * discard_granularity is just a hint, and not enforced. */ - limits->discard_granularity = pool->sectors_per_block << SECTOR_SHIFT; - limits->discard_zeroes_data = pool->pf.zero_new_blocks; + if (pt->adjusted_pf.discard_passdown) { + data_limits = &bdev_get_queue(pt->data_dev->bdev)->limits; + limits->discard_granularity = data_limits->discard_granularity; + } else + limits->discard_granularity = pool->sectors_per_block << SECTOR_SHIFT; } static void pool_io_hints(struct dm_target *ti, struct queue_limits *limits) @@ -2755,15 +2786,25 @@ static void pool_io_hints(struct dm_target *ti, struct queue_limits *limits) blk_limits_io_min(limits, 0); blk_limits_io_opt(limits, pool->sectors_per_block << SECTOR_SHIFT); - if (pool->pf.discard_enabled) - set_discard_limits(pool, limits); + + /* + * pt->adjusted_pf is a staging area for the actual features to use. + * They get transferred to the live pool in bind_control_target() + * called from pool_preresume(). + */ + if (!pt->adjusted_pf.discard_enabled) + return; + + disable_passdown_if_not_supported(pt); + + set_discard_limits(pt, limits); } static struct target_type pool_target = { .name = "thin-pool", .features = DM_TARGET_SINGLETON | DM_TARGET_ALWAYS_WRITEABLE | DM_TARGET_IMMUTABLE, - .version = {1, 3, 0}, + .version = {1, 4, 0}, .module = THIS_MODULE, .ctr = pool_ctr, .dtr = pool_dtr, @@ -3042,19 +3083,19 @@ static int thin_iterate_devices(struct dm_target *ti, return 0; } +/* + * A thin device always inherits its queue limits from its pool. + */ static void thin_io_hints(struct dm_target *ti, struct queue_limits *limits) { struct thin_c *tc = ti->private; - struct pool *pool = tc->pool; - blk_limits_io_min(limits, 0); - blk_limits_io_opt(limits, pool->sectors_per_block << SECTOR_SHIFT); - set_discard_limits(pool, limits); + *limits = bdev_get_queue(tc->pool_dev->bdev)->limits; } static struct target_type thin_target = { .name = "thin", - .version = {1, 3, 0}, + .version = {1, 4, 0}, .module = THIS_MODULE, .ctr = thin_ctr, .dtr = thin_dtr, diff --git a/drivers/md/dm-verity.c b/drivers/md/dm-verity.c index 254d19268ad..892ae2766aa 100644 --- a/drivers/md/dm-verity.c +++ b/drivers/md/dm-verity.c @@ -718,8 +718,8 @@ static int verity_ctr(struct dm_target *ti, unsigned argc, char **argv) v->hash_dev_block_bits = ffs(num) - 1; if (sscanf(argv[5], "%llu%c", &num_ll, &dummy) != 1 || - num_ll << (v->data_dev_block_bits - SECTOR_SHIFT) != - (sector_t)num_ll << (v->data_dev_block_bits - SECTOR_SHIFT)) { + (sector_t)(num_ll << (v->data_dev_block_bits - SECTOR_SHIFT)) + >> (v->data_dev_block_bits - SECTOR_SHIFT) != num_ll) { ti->error = "Invalid data blocks"; r = -EINVAL; goto bad; @@ -733,8 +733,8 @@ static int verity_ctr(struct dm_target *ti, unsigned argc, char **argv) } if (sscanf(argv[6], "%llu%c", &num_ll, &dummy) != 1 || - num_ll << (v->hash_dev_block_bits - SECTOR_SHIFT) != - (sector_t)num_ll << (v->hash_dev_block_bits - SECTOR_SHIFT)) { + (sector_t)(num_ll << (v->hash_dev_block_bits - SECTOR_SHIFT)) + >> (v->hash_dev_block_bits - SECTOR_SHIFT) != num_ll) { ti->error = "Invalid hash start"; r = -EINVAL; goto bad; diff --git a/drivers/md/dm.c b/drivers/md/dm.c index 4e09b6ff5b4..67ffa391edc 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -865,10 +865,14 @@ static void dm_done(struct request *clone, int error, bool mapped) { int r = error; struct dm_rq_target_io *tio = clone->end_io_data; - dm_request_endio_fn rq_end_io = tio->ti->type->rq_end_io; + dm_request_endio_fn rq_end_io = NULL; - if (mapped && rq_end_io) - r = rq_end_io(tio->ti, clone, error, &tio->info); + if (tio->ti) { + rq_end_io = tio->ti->type->rq_end_io; + + if (mapped && rq_end_io) + r = rq_end_io(tio->ti, clone, error, &tio->info); + } if (r <= 0) /* The target wants to complete the I/O */ @@ -1588,15 +1592,6 @@ static int map_request(struct dm_target *ti, struct request *clone, int r, requeued = 0; struct dm_rq_target_io *tio = clone->end_io_data; - /* - * Hold the md reference here for the in-flight I/O. - * We can't rely on the reference count by device opener, - * because the device may be closed during the request completion - * when all bios are completed. - * See the comment in rq_completed() too. - */ - dm_get(md); - tio->ti = ti; r = ti->type->map_rq(ti, clone, &tio->info); switch (r) { @@ -1628,6 +1623,26 @@ static int map_request(struct dm_target *ti, struct request *clone, return requeued; } +static struct request *dm_start_request(struct mapped_device *md, struct request *orig) +{ + struct request *clone; + + blk_start_request(orig); + clone = orig->special; + atomic_inc(&md->pending[rq_data_dir(clone)]); + + /* + * Hold the md reference here for the in-flight I/O. + * We can't rely on the reference count by device opener, + * because the device may be closed during the request completion + * when all bios are completed. + * See the comment in rq_completed() too. + */ + dm_get(md); + + return clone; +} + /* * q->request_fn for request-based dm. * Called with the queue lock held. @@ -1657,14 +1672,21 @@ static void dm_request_fn(struct request_queue *q) pos = blk_rq_pos(rq); ti = dm_table_find_target(map, pos); - BUG_ON(!dm_target_is_valid(ti)); + if (!dm_target_is_valid(ti)) { + /* + * Must perform setup, that dm_done() requires, + * before calling dm_kill_unmapped_request + */ + DMERR_LIMIT("request attempted access beyond the end of device"); + clone = dm_start_request(md, rq); + dm_kill_unmapped_request(clone, -EIO); + continue; + } if (ti->type->busy && ti->type->busy(ti)) goto delay_and_out; - blk_start_request(rq); - clone = rq->special; - atomic_inc(&md->pending[rq_data_dir(clone)]); + clone = dm_start_request(md, rq); spin_unlock(q->queue_lock); if (map_request(ti, clone, md)) @@ -1684,8 +1706,6 @@ delay_and_out: blk_delay_queue(q, HZ / 10); out: dm_table_put(map); - - return; } int dm_underlying_device_busy(struct request_queue *q) @@ -2409,7 +2429,7 @@ static void dm_queue_flush(struct mapped_device *md) */ struct dm_table *dm_swap_table(struct mapped_device *md, struct dm_table *table) { - struct dm_table *map = ERR_PTR(-EINVAL); + struct dm_table *live_map, *map = ERR_PTR(-EINVAL); struct queue_limits limits; int r; @@ -2419,6 +2439,19 @@ struct dm_table *dm_swap_table(struct mapped_device *md, struct dm_table *table) if (!dm_suspended_md(md)) goto out; + /* + * If the new table has no data devices, retain the existing limits. + * This helps multipath with queue_if_no_path if all paths disappear, + * then new I/O is queued based on these limits, and then some paths + * reappear. + */ + if (dm_table_has_no_data_devices(table)) { + live_map = dm_get_live_table(md); + if (live_map) + limits = md->queue->limits; + dm_table_put(live_map); + } + r = dm_calculate_queue_limits(table, &limits); if (r) { map = ERR_PTR(r); diff --git a/drivers/md/dm.h b/drivers/md/dm.h index 52eef493d26..6a99fefaa74 100644 --- a/drivers/md/dm.h +++ b/drivers/md/dm.h @@ -54,6 +54,7 @@ void dm_table_event_callback(struct dm_table *t, void (*fn)(void *), void *context); struct dm_target *dm_table_get_target(struct dm_table *t, unsigned int index); struct dm_target *dm_table_find_target(struct dm_table *t, sector_t sector); +bool dm_table_has_no_data_devices(struct dm_table *table); int dm_calculate_queue_limits(struct dm_table *table, struct queue_limits *limits); void dm_table_set_restrictions(struct dm_table *t, struct request_queue *q, diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index 1c2eb38f3c5..0138a727c1f 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -1512,14 +1512,16 @@ static int _enough(struct r10conf *conf, struct geom *geo, int ignore) do { int n = conf->copies; int cnt = 0; + int this = first; while (n--) { - if (conf->mirrors[first].rdev && - first != ignore) + if (conf->mirrors[this].rdev && + this != ignore) cnt++; - first = (first+1) % geo->raid_disks; + this = (this+1) % geo->raid_disks; } if (cnt == 0) return 0; + first = (first + geo->near_copies) % geo->raid_disks; } while (first != 0); return 1; } diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 7031b865b3a..0689173fd9f 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -1591,6 +1591,7 @@ static int resize_stripes(struct r5conf *conf, int newsize) #ifdef CONFIG_MULTICORE_RAID456 init_waitqueue_head(&nsh->ops.wait_for_ops); #endif + spin_lock_init(&nsh->stripe_lock); list_add(&nsh->lru, &newstripes); } diff --git a/drivers/mfd/ab8500-gpadc.c b/drivers/mfd/ab8500-gpadc.c index 866f95960b4..29d72a259c8 100644 --- a/drivers/mfd/ab8500-gpadc.c +++ b/drivers/mfd/ab8500-gpadc.c @@ -342,7 +342,7 @@ int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel) /* * Delay might be needed for ABB8500 cut 3.0, if not, remove - * when hardware will be availible + * when hardware will be available */ msleep(1); break; diff --git a/drivers/mfd/rc5t583.c b/drivers/mfd/rc5t583.c index 3a8fa88567b..ff61efc76ce 100644 --- a/drivers/mfd/rc5t583.c +++ b/drivers/mfd/rc5t583.c @@ -281,7 +281,7 @@ static int __devinit rc5t583_i2c_probe(struct i2c_client *i2c, if (i2c->irq) { ret = rc5t583_irq_init(rc5t583, i2c->irq, pdata->irq_base); - /* Still continue with waring if irq init fails */ + /* Still continue with warning, if irq init fails */ if (ret) dev_warn(&i2c->dev, "IRQ init failed: %d\n", ret); else diff --git a/drivers/mfd/rdc321x-southbridge.c b/drivers/mfd/rdc321x-southbridge.c index 0f70dce6116..fbabc3cbe35 100644 --- a/drivers/mfd/rdc321x-southbridge.c +++ b/drivers/mfd/rdc321x-southbridge.c @@ -1,5 +1,5 @@ /* - * RDC321x MFD southbrige driver + * RDC321x MFD southbridge driver * * Copyright (C) 2007-2010 Florian Fainelli <florian@openwrt.org> * Copyright (C) 2010 Bernhard Loos <bernhardloos@googlemail.com> diff --git a/drivers/mfd/tps6586x.c b/drivers/mfd/tps6586x.c index 5f58370ccf5..345960ca2fd 100644 --- a/drivers/mfd/tps6586x.c +++ b/drivers/mfd/tps6586x.c @@ -25,6 +25,7 @@ #include <linux/i2c.h> #include <linux/regmap.h> #include <linux/regulator/of_regulator.h> +#include <linux/regulator/machine.h> #include <linux/mfd/core.h> #include <linux/mfd/tps6586x.h> @@ -346,6 +347,7 @@ failed: #ifdef CONFIG_OF static struct of_regulator_match tps6586x_matches[] = { + { .name = "sys", .driver_data = (void *)TPS6586X_ID_SYS }, { .name = "sm0", .driver_data = (void *)TPS6586X_ID_SM_0 }, { .name = "sm1", .driver_data = (void *)TPS6586X_ID_SM_1 }, { .name = "sm2", .driver_data = (void *)TPS6586X_ID_SM_2 }, @@ -369,6 +371,7 @@ static struct tps6586x_platform_data *tps6586x_parse_dt(struct i2c_client *clien struct tps6586x_platform_data *pdata; struct tps6586x_subdev_info *devs; struct device_node *regs; + const char *sys_rail_name = NULL; unsigned int count; unsigned int i, j; int err; @@ -391,12 +394,22 @@ static struct tps6586x_platform_data *tps6586x_parse_dt(struct i2c_client *clien return NULL; for (i = 0, j = 0; i < num && j < count; i++) { + struct regulator_init_data *reg_idata; + if (!tps6586x_matches[i].init_data) continue; + reg_idata = tps6586x_matches[i].init_data; devs[j].name = "tps6586x-regulator"; devs[j].platform_data = tps6586x_matches[i].init_data; devs[j].id = (int)tps6586x_matches[i].driver_data; + if (devs[j].id == TPS6586X_ID_SYS) + sys_rail_name = reg_idata->constraints.name; + + if ((devs[j].id == TPS6586X_ID_LDO_5) || + (devs[j].id == TPS6586X_ID_LDO_RTC)) + reg_idata->supply_regulator = sys_rail_name; + devs[j].of_node = tps6586x_matches[i].of_node; j++; } diff --git a/drivers/mfd/tps65911-comparator.c b/drivers/mfd/tps65911-comparator.c index 5a62e6bf89a..0b6e361432c 100644 --- a/drivers/mfd/tps65911-comparator.c +++ b/drivers/mfd/tps65911-comparator.c @@ -136,7 +136,7 @@ static __devinit int tps65911_comparator_probe(struct platform_device *pdev) ret = comp_threshold_set(tps65910, COMP2, pdata->vmbch2_threshold); if (ret < 0) { - dev_err(&pdev->dev, "cannot set COMP2 theshold\n"); + dev_err(&pdev->dev, "cannot set COMP2 threshold\n"); return ret; } diff --git a/drivers/mfd/wm8994-irq.c b/drivers/mfd/wm8994-irq.c index 0aac4aff17a..a050e56a9bb 100644 --- a/drivers/mfd/wm8994-irq.c +++ b/drivers/mfd/wm8994-irq.c @@ -135,6 +135,7 @@ static struct regmap_irq_chip wm8994_irq_chip = { .status_base = WM8994_INTERRUPT_STATUS_1, .mask_base = WM8994_INTERRUPT_STATUS_1_MASK, .ack_base = WM8994_INTERRUPT_STATUS_1, + .runtime_pm = true, }; int wm8994_irq_init(struct wm8994 *wm8994) diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c index d4619e2ec03..2273ce6b6c1 100644 --- a/drivers/mmc/core/sdio.c +++ b/drivers/mmc/core/sdio.c @@ -641,7 +641,7 @@ static int mmc_sdio_init_card(struct mmc_host *host, u32 ocr, /* * If the host and card support UHS-I mode request the card * to switch to 1.8V signaling level. No 1.8v signalling if - * UHS mode is not enabled to maintain compatibilty and some + * UHS mode is not enabled to maintain compatibility and some * systems that claim 1.8v signalling in fact do not support * it. */ diff --git a/drivers/mmc/host/at91_mci.c b/drivers/mmc/host/at91_mci.c index efdb81d21c4..74bed0fc23e 100644 --- a/drivers/mmc/host/at91_mci.c +++ b/drivers/mmc/host/at91_mci.c @@ -356,7 +356,7 @@ static void at91_mci_handle_transmitted(struct at91mci_host *host) } /* - * Update bytes tranfered count during a write operation + * Update bytes transfered count during a write operation */ static void at91_mci_update_bytes_xfered(struct at91mci_host *host) { diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index a53c7c478e0..852d5fbda63 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -1022,7 +1022,7 @@ static void atmci_stop_transfer(struct atmel_mci *host) } /* - * Stop data transfer because error(s) occured. + * Stop data transfer because error(s) occurred. */ static void atmci_stop_transfer_pdc(struct atmel_mci *host) { diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index 3a09f93cc3b..686e256764c 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -447,7 +447,7 @@ static void omap_hsmmc_stop_clock(struct omap_hsmmc_host *host) OMAP_HSMMC_WRITE(host->base, SYSCTL, OMAP_HSMMC_READ(host->base, SYSCTL) & ~CEN); if ((OMAP_HSMMC_READ(host->base, SYSCTL) & CEN) != 0x0) - dev_dbg(mmc_dev(host->mmc), "MMC Clock is not stoped\n"); + dev_dbg(mmc_dev(host->mmc), "MMC Clock is not stopped\n"); } static void omap_hsmmc_enable_irq(struct omap_hsmmc_host *host, diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index e23f8134591..32f4a070551 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -315,7 +315,7 @@ static void esdhc_writeb_le(struct sdhci_host *host, u8 val, int reg) new_val = val & (SDHCI_CTRL_LED | \ SDHCI_CTRL_4BITBUS | \ SDHCI_CTRL_D3CD); - /* ensure the endianess */ + /* ensure the endianness */ new_val |= ESDHC_HOST_CONTROL_LE; /* bits 8&9 are reserved on mx25 */ if (!is_imx25_esdhc(imx_data)) { diff --git a/drivers/mmc/host/vub300.c b/drivers/mmc/host/vub300.c index 3135a1a5d75..58eab9ac1d0 100644 --- a/drivers/mmc/host/vub300.c +++ b/drivers/mmc/host/vub300.c @@ -806,7 +806,7 @@ static void command_res_completed(struct urb *urb) * we suspect a buggy USB host controller */ } else if (!vub300->data) { - /* this means that the command (typically CMD52) suceeded */ + /* this means that the command (typically CMD52) succeeded */ } else if (vub300->resp.common.header_type != 0x02) { /* * this is an error response from the VUB300 chip diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c index f2f482bec57..a6e74514e66 100644 --- a/drivers/mtd/mtdchar.c +++ b/drivers/mtd/mtdchar.c @@ -1123,6 +1123,33 @@ static unsigned long mtdchar_get_unmapped_area(struct file *file, } #endif +static inline unsigned long get_vm_size(struct vm_area_struct *vma) +{ + return vma->vm_end - vma->vm_start; +} + +static inline resource_size_t get_vm_offset(struct vm_area_struct *vma) +{ + return (resource_size_t) vma->vm_pgoff << PAGE_SHIFT; +} + +/* + * Set a new vm offset. + * + * Verify that the incoming offset really works as a page offset, + * and that the offset and size fit in a resource_size_t. + */ +static inline int set_vm_offset(struct vm_area_struct *vma, resource_size_t off) +{ + pgoff_t pgoff = off >> PAGE_SHIFT; + if (off != (resource_size_t) pgoff << PAGE_SHIFT) + return -EINVAL; + if (off + get_vm_size(vma) - 1 < off) + return -EINVAL; + vma->vm_pgoff = pgoff; + return 0; +} + /* * set up a mapping for shared memory segments */ @@ -1132,20 +1159,29 @@ static int mtdchar_mmap(struct file *file, struct vm_area_struct *vma) struct mtd_file_info *mfi = file->private_data; struct mtd_info *mtd = mfi->mtd; struct map_info *map = mtd->priv; - unsigned long start; - unsigned long off; - u32 len; + resource_size_t start, off; + unsigned long len, vma_len; if (mtd->type == MTD_RAM || mtd->type == MTD_ROM) { - off = vma->vm_pgoff << PAGE_SHIFT; + off = get_vm_offset(vma); start = map->phys; len = PAGE_ALIGN((start & ~PAGE_MASK) + map->size); start &= PAGE_MASK; - if ((vma->vm_end - vma->vm_start + off) > len) + vma_len = get_vm_size(vma); + + /* Overflow in off+len? */ + if (vma_len + off < off) + return -EINVAL; + /* Does it fit in the mapping? */ + if (vma_len + off > len) return -EINVAL; off += start; - vma->vm_pgoff = off >> PAGE_SHIFT; + /* Did that overflow? */ + if (off < start) + return -EINVAL; + if (set_vm_offset(vma, off) < 0) + return -EINVAL; vma->vm_flags |= VM_IO | VM_RESERVED; #ifdef pgprot_noncached diff --git a/drivers/net/ethernet/3com/typhoon.c b/drivers/net/ethernet/3com/typhoon.c index b1536663514..bb9670f29b5 100644 --- a/drivers/net/ethernet/3com/typhoon.c +++ b/drivers/net/ethernet/3com/typhoon.c @@ -364,7 +364,7 @@ typhoon_inc_rxfree_index(u32 *index, const int count) static inline void typhoon_inc_tx_index(u32 *index, const int count) { - /* if we start using the Hi Tx ring, this needs updateing */ + /* if we start using the Hi Tx ring, this needs updating */ typhoon_inc_index(index, count, TXLO_ENTRIES); } diff --git a/drivers/net/ethernet/broadcom/bnx2.c b/drivers/net/ethernet/broadcom/bnx2.c index 79cebd8525c..e48312f2305 100644 --- a/drivers/net/ethernet/broadcom/bnx2.c +++ b/drivers/net/ethernet/broadcom/bnx2.c @@ -8564,7 +8564,7 @@ bnx2_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) return 0; error: - iounmap(bp->regview); + pci_iounmap(pdev, bp->regview); pci_release_regions(pdev); pci_disable_device(pdev); pci_set_drvdata(pdev, NULL); diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h index 6d1a24acb77..eac25236856 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h @@ -1458,7 +1458,7 @@ struct bnx2x { int fw_stats_req_sz; /* - * FW statistics data shortcut (points at the begining of + * FW statistics data shortcut (points at the beginning of * fw_stats buffer + fw_stats_req_sz). */ struct bnx2x_fw_stats_data *fw_stats_data; diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h index f83e033da6d..acf2fe4ca60 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h @@ -1321,7 +1321,7 @@ void bnx2x_init_mcast_obj(struct bnx2x *bp, * the current command will be enqueued to the tail of the * pending commands list. * - * Return: 0 is operation was sucessfull and there are no pending completions, + * Return: 0 is operation was successfull and there are no pending completions, * negative if there were errors, positive if there are pending * completions. */ diff --git a/drivers/net/ethernet/octeon/octeon_mgmt.c b/drivers/net/ethernet/octeon/octeon_mgmt.c index c42bbb16cda..a688a2ddcfd 100644 --- a/drivers/net/ethernet/octeon/octeon_mgmt.c +++ b/drivers/net/ethernet/octeon/octeon_mgmt.c @@ -722,10 +722,8 @@ static int octeon_mgmt_init_phy(struct net_device *netdev) octeon_mgmt_adjust_link, 0, PHY_INTERFACE_MODE_MII); - if (IS_ERR(p->phydev)) { - p->phydev = NULL; + if (!p->phydev) return -1; - } phy_start_aneg(p->phydev); diff --git a/drivers/net/ethernet/pasemi/pasemi_mac.c b/drivers/net/ethernet/pasemi/pasemi_mac.c index e559dfa06d6..6fa74d530e4 100644 --- a/drivers/net/ethernet/pasemi/pasemi_mac.c +++ b/drivers/net/ethernet/pasemi/pasemi_mac.c @@ -1101,9 +1101,9 @@ static int pasemi_mac_phy_init(struct net_device *dev) phydev = of_phy_connect(dev, phy_dn, &pasemi_adjust_link, 0, PHY_INTERFACE_MODE_SGMII); - if (IS_ERR(phydev)) { + if (!phydev) { printk(KERN_ERR "%s: Could not attach to phy\n", dev->name); - return PTR_ERR(phydev); + return -ENODEV; } mac->phydev = phydev; diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c index b8ead696141..2a179d08720 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c @@ -15,7 +15,7 @@ qlcnic_poll_rsp(struct qlcnic_adapter *adapter) do { /* give atleast 1ms for firmware to respond */ - msleep(1); + mdelay(1); if (++timeout > QLCNIC_OS_CRB_RETRY_COUNT) return QLCNIC_CDRP_RSP_TIMEOUT; @@ -601,7 +601,7 @@ void qlcnic_fw_destroy_ctx(struct qlcnic_adapter *adapter) qlcnic_fw_cmd_destroy_tx_ctx(adapter); /* Allow dma queues to drain after context reset */ - msleep(20); + mdelay(20); } } diff --git a/drivers/net/phy/smsc.c b/drivers/net/phy/smsc.c index 6d6192316b3..88e3991464e 100644 --- a/drivers/net/phy/smsc.c +++ b/drivers/net/phy/smsc.c @@ -56,6 +56,32 @@ static int smsc_phy_config_init(struct phy_device *phydev) return smsc_phy_ack_interrupt (phydev); } +static int lan87xx_config_init(struct phy_device *phydev) +{ + /* + * Make sure the EDPWRDOWN bit is NOT set. Setting this bit on + * LAN8710/LAN8720 PHY causes the PHY to misbehave, likely due + * to a bug on the chip. + * + * When the system is powered on with the network cable being + * disconnected all the way until after ifconfig ethX up is + * issued for the LAN port with this PHY, connecting the cable + * afterwards does not cause LINK change detection, while the + * expected behavior is the Link UP being detected. + */ + int rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS); + if (rc < 0) + return rc; + + rc &= ~MII_LAN83C185_EDPWRDOWN; + + rc = phy_write(phydev, MII_LAN83C185_CTRL_STATUS, rc); + if (rc < 0) + return rc; + + return smsc_phy_ack_interrupt(phydev); +} + static int lan911x_config_init(struct phy_device *phydev) { return smsc_phy_ack_interrupt(phydev); @@ -162,7 +188,7 @@ static struct phy_driver smsc_phy_driver[] = { /* basic functions */ .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, - .config_init = smsc_phy_config_init, + .config_init = lan87xx_config_init, /* IRQ related */ .ack_interrupt = smsc_phy_ack_interrupt, diff --git a/drivers/net/team/team.c b/drivers/net/team/team.c index 3ffe8a6e3c8..f8cd61f449a 100644 --- a/drivers/net/team/team.c +++ b/drivers/net/team/team.c @@ -1653,8 +1653,8 @@ static int team_nl_cmd_noop(struct sk_buff *skb, struct genl_info *info) hdr = genlmsg_put(msg, info->snd_pid, info->snd_seq, &team_nl_family, 0, TEAM_CMD_NOOP); - if (IS_ERR(hdr)) { - err = PTR_ERR(hdr); + if (!hdr) { + err = -EMSGSIZE; goto err_msg_put; } @@ -1848,8 +1848,8 @@ start_again: hdr = genlmsg_put(skb, pid, seq, &team_nl_family, flags | NLM_F_MULTI, TEAM_CMD_OPTIONS_GET); - if (IS_ERR(hdr)) - return PTR_ERR(hdr); + if (!hdr) + return -EMSGSIZE; if (nla_put_u32(skb, TEAM_ATTR_TEAM_IFINDEX, team->dev->ifindex)) goto nla_put_failure; @@ -2068,8 +2068,8 @@ static int team_nl_fill_port_list_get(struct sk_buff *skb, hdr = genlmsg_put(skb, pid, seq, &team_nl_family, flags, TEAM_CMD_PORT_LIST_GET); - if (IS_ERR(hdr)) - return PTR_ERR(hdr); + if (!hdr) + return -EMSGSIZE; if (nla_put_u32(skb, TEAM_ATTR_TEAM_IFINDEX, team->dev->ifindex)) goto nla_put_failure; diff --git a/drivers/net/usb/smsc75xx.c b/drivers/net/usb/smsc75xx.c index f5ab6e613ec..376143e8a1a 100644 --- a/drivers/net/usb/smsc75xx.c +++ b/drivers/net/usb/smsc75xx.c @@ -1253,6 +1253,7 @@ static struct usb_driver smsc75xx_driver = { .probe = usbnet_probe, .suspend = usbnet_suspend, .resume = usbnet_resume, + .reset_resume = usbnet_resume, .disconnect = usbnet_disconnect, .disable_hub_initiated_lpm = 1, }; diff --git a/drivers/net/wireless/b43/Kconfig b/drivers/net/wireless/b43/Kconfig index 3876c7ea54f..7a28d21ac38 100644 --- a/drivers/net/wireless/b43/Kconfig +++ b/drivers/net/wireless/b43/Kconfig @@ -34,8 +34,8 @@ config B43_BCMA config B43_BCMA_EXTRA bool "Hardware support that overlaps with the brcmsmac driver" depends on B43_BCMA - default n if BRCMSMAC || BRCMSMAC_MODULE - default y + default n if BRCMSMAC + default y config B43_SSB bool diff --git a/drivers/net/wireless/rtlwifi/rtl8192c/fw_common.c b/drivers/net/wireless/rtlwifi/rtl8192c/fw_common.c index 44febfde949..8a7b864faca 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192c/fw_common.c +++ b/drivers/net/wireless/rtlwifi/rtl8192c/fw_common.c @@ -315,7 +315,7 @@ static void _rtl92c_fill_h2c_command(struct ieee80211_hw *hw, u16 box_reg = 0, box_extreg = 0; u8 u1b_tmp; bool isfw_read = false; - bool bwrite_sucess = false; + bool bwrite_success = false; u8 wait_h2c_limmit = 100; u8 wait_writeh2c_limmit = 100; u8 boxcontent[4], boxextcontent[2]; @@ -354,7 +354,7 @@ static void _rtl92c_fill_h2c_command(struct ieee80211_hw *hw, } } - while (!bwrite_sucess) { + while (!bwrite_success) { wait_writeh2c_limmit--; if (wait_writeh2c_limmit == 0) { RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, @@ -491,7 +491,7 @@ static void _rtl92c_fill_h2c_command(struct ieee80211_hw *hw, break; } - bwrite_sucess = true; + bwrite_success = true; rtlhal->last_hmeboxnum = boxnum + 1; if (rtlhal->last_hmeboxnum == 4) diff --git a/drivers/net/wireless/rtlwifi/rtl8192de/fw.c b/drivers/net/wireless/rtlwifi/rtl8192de/fw.c index 895ae6c1f35..eb22dccc418 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192de/fw.c +++ b/drivers/net/wireless/rtlwifi/rtl8192de/fw.c @@ -365,7 +365,7 @@ static void _rtl92d_fill_h2c_command(struct ieee80211_hw *hw, u8 u1b_tmp; bool isfw_read = false; u8 buf_index = 0; - bool bwrite_sucess = false; + bool bwrite_success = false; u8 wait_h2c_limmit = 100; u8 wait_writeh2c_limmit = 100; u8 boxcontent[4], boxextcontent[2]; @@ -408,7 +408,7 @@ static void _rtl92d_fill_h2c_command(struct ieee80211_hw *hw, break; } } - while (!bwrite_sucess) { + while (!bwrite_success) { wait_writeh2c_limmit--; if (wait_writeh2c_limmit == 0) { RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, @@ -515,7 +515,7 @@ static void _rtl92d_fill_h2c_command(struct ieee80211_hw *hw, "switch case not processed\n"); break; } - bwrite_sucess = true; + bwrite_success = true; rtlhal->last_hmeboxnum = boxnum + 1; if (rtlhal->last_hmeboxnum == 4) rtlhal->last_hmeboxnum = 0; diff --git a/drivers/oprofile/cpu_buffer.c b/drivers/oprofile/cpu_buffer.c index b8ef8ddcc29..8aa73fac6ad 100644 --- a/drivers/oprofile/cpu_buffer.c +++ b/drivers/oprofile/cpu_buffer.c @@ -451,14 +451,9 @@ static void wq_sync_buffer(struct work_struct *work) { struct oprofile_cpu_buffer *b = container_of(work, struct oprofile_cpu_buffer, work.work); - if (b->cpu != smp_processor_id()) { - printk(KERN_DEBUG "WQ on CPU%d, prefer CPU%d\n", - smp_processor_id(), b->cpu); - - if (!cpu_online(b->cpu)) { - cancel_delayed_work(&b->work); - return; - } + if (b->cpu != smp_processor_id() && !cpu_online(b->cpu)) { + cancel_delayed_work(&b->work); + return; } sync_buffer(b->cpu); diff --git a/drivers/pci/.gitignore b/drivers/pci/.gitignore deleted file mode 100644 index f297ca8d313..00000000000 --- a/drivers/pci/.gitignore +++ /dev/null @@ -1,4 +0,0 @@ -classlist.h -devlist.h -gen-devlist - diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 4e932cc695e..e98a5e7827d 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -33,9 +33,8 @@ config REGULATOR_DUMMY help If this option is enabled then when a regulator lookup fails and the board has not specified that it has provided full - constraints then the regulator core will provide an always - enabled dummy regulator will be provided, allowing consumer - drivers to continue. + constraints the regulator core will provide an always + enabled dummy regulator, allowing consumer drivers to continue. A warning will be generated when this substitution is done. @@ -50,11 +49,11 @@ config REGULATOR_VIRTUAL_CONSUMER tristate "Virtual regulator consumer support" help This driver provides a virtual consumer for the voltage and - current regulator API which provides sysfs controls for - configuring the supplies requested. This is mainly useful - for test purposes. + current regulator API which provides sysfs controls for + configuring the supplies requested. This is mainly useful + for test purposes. - If unsure, say no. + If unsure, say no. config REGULATOR_USERSPACE_CONSUMER tristate "Userspace regulator consumer support" @@ -63,7 +62,7 @@ config REGULATOR_USERSPACE_CONSUMER from user space. Userspace consumer driver provides ability to control power supplies for such devices. - If unsure, say no. + If unsure, say no. config REGULATOR_GPIO tristate "GPIO regulator support" @@ -110,6 +109,17 @@ config REGULATOR_DA9052 This driver supports the voltage regulators of DA9052-BC and DA9053-AA/Bx PMIC. +config REGULATOR_FAN53555 + tristate "Fairchild FAN53555 Regulator" + depends on I2C + select REGMAP_I2C + help + This driver supports Fairchild FAN53555 Digitally Programmable + TinyBuck Regulator. The FAN53555 is a step-down switching voltage + regulator that delivers a digitally programmable output from an + input voltage supply of 2.5V to 5.5V. The output voltage is + programmed through an I2C interface. + config REGULATOR_ANATOP tristate "Freescale i.MX on-chip ANATOP LDO regulators" depends on MFD_ANATOP @@ -172,6 +182,14 @@ config REGULATOR_MAX8660 This driver controls a Maxim 8660/8661 voltage output regulator via I2C bus. +config REGULATOR_MAX8907 + tristate "Maxim 8907 voltage regulator" + depends on MFD_MAX8907 + help + This driver controls a Maxim 8907 voltage output regulator + via I2C bus. The provided regulator is suitable for Tegra + chip to control Step-Down DC-DC and LDOs. + config REGULATOR_MAX8925 tristate "Maxim MAX8925 Power Management IC" depends on MFD_MAX8925 @@ -247,7 +265,7 @@ config REGULATOR_LP8788 config REGULATOR_PCF50633 tristate "NXP PCF50633 regulator driver" - depends on MFD_PCF50633 + depends on MFD_PCF50633 help Say Y here to support the voltage regulators and convertors on PCF50633 @@ -416,7 +434,7 @@ config REGULATOR_WM8350 depends on MFD_WM8350 help This driver provides support for the voltage and current regulators - of the WM8350 AudioPlus PMIC. + of the WM8350 AudioPlus PMIC. config REGULATOR_WM8400 tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC" diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 3342615cf25..e431eed8a87 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -20,6 +20,7 @@ obj-$(CONFIG_REGULATOR_DA903X) += da903x.o obj-$(CONFIG_REGULATOR_DA9052) += da9052-regulator.o obj-$(CONFIG_REGULATOR_DBX500_PRCMU) += dbx500-prcmu.o obj-$(CONFIG_REGULATOR_DB8500_PRCMU) += db8500-prcmu.o +obj-$(CONFIG_REGULATOR_FAN53555) += fan53555.o obj-$(CONFIG_REGULATOR_GPIO) += gpio-regulator.o obj-$(CONFIG_REGULATOR_ISL6271A) += isl6271a-regulator.o obj-$(CONFIG_REGULATOR_LP3971) += lp3971.o @@ -30,6 +31,7 @@ obj-$(CONFIG_REGULATOR_LP8788) += lp8788-ldo.o obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o obj-$(CONFIG_REGULATOR_MAX8649) += max8649.o obj-$(CONFIG_REGULATOR_MAX8660) += max8660.o +obj-$(CONFIG_REGULATOR_MAX8907) += max8907-regulator.o obj-$(CONFIG_REGULATOR_MAX8925) += max8925-regulator.o obj-$(CONFIG_REGULATOR_MAX8952) += max8952.o obj-$(CONFIG_REGULATOR_MAX8997) += max8997.o diff --git a/drivers/regulator/aat2870-regulator.c b/drivers/regulator/aat2870-regulator.c index 6f45bfd22e8..167c93f2198 100644 --- a/drivers/regulator/aat2870-regulator.c +++ b/drivers/regulator/aat2870-regulator.c @@ -162,7 +162,7 @@ static struct aat2870_regulator *aat2870_get_regulator(int id) static int aat2870_regulator_probe(struct platform_device *pdev) { struct aat2870_regulator *ri; - struct regulator_config config = { 0 }; + struct regulator_config config = { }; struct regulator_dev *rdev; ri = aat2870_get_regulator(pdev->id); diff --git a/drivers/regulator/ab3100.c b/drivers/regulator/ab3100.c index c151fd5d8c9..65ad2b36ce3 100644 --- a/drivers/regulator/ab3100.c +++ b/drivers/regulator/ab3100.c @@ -347,17 +347,11 @@ static int ab3100_get_voltage_regulator_external(struct regulator_dev *reg) return abreg->plfdata->external_voltage; } -static int ab3100_get_fixed_voltage_regulator(struct regulator_dev *reg) -{ - return reg->desc->min_uV; -} - static struct regulator_ops regulator_ops_fixed = { .list_voltage = regulator_list_voltage_linear, .enable = ab3100_enable_regulator, .disable = ab3100_disable_regulator, .is_enabled = ab3100_is_enabled_regulator, - .get_voltage = ab3100_get_fixed_voltage_regulator, }; static struct regulator_ops regulator_ops_variable = { diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c index 10f2f4d4d19..e3d1d063025 100644 --- a/drivers/regulator/ab8500.c +++ b/drivers/regulator/ab8500.c @@ -37,6 +37,7 @@ * @voltage_bank: bank to control regulator voltage * @voltage_reg: register to control regulator voltage * @voltage_mask: mask to control regulator voltage + * @voltage_shift: shift to control regulator voltage * @delay: startup/set voltage delay in us */ struct ab8500_regulator_info { @@ -50,6 +51,7 @@ struct ab8500_regulator_info { u8 voltage_bank; u8 voltage_reg; u8 voltage_mask; + u8 voltage_shift; unsigned int delay; }; @@ -195,17 +197,14 @@ static int ab8500_regulator_get_voltage_sel(struct regulator_dev *rdev) } dev_vdbg(rdev_get_dev(rdev), - "%s-get_voltage (bank, reg, mask, value): 0x%x, 0x%x, 0x%x," - " 0x%x\n", - info->desc.name, info->voltage_bank, info->voltage_reg, - info->voltage_mask, regval); + "%s-get_voltage (bank, reg, mask, shift, value): " + "0x%x, 0x%x, 0x%x, 0x%x, 0x%x\n", + info->desc.name, info->voltage_bank, + info->voltage_reg, info->voltage_mask, + info->voltage_shift, regval); - /* vintcore has a different layout */ val = regval & info->voltage_mask; - if (info->desc.id == AB8500_LDO_INTCORE) - return val >> 0x3; - else - return val; + return val >> info->voltage_shift; } static int ab8500_regulator_set_voltage_sel(struct regulator_dev *rdev, @@ -221,7 +220,7 @@ static int ab8500_regulator_set_voltage_sel(struct regulator_dev *rdev, } /* set the registers for the request */ - regval = (u8)selector; + regval = (u8)selector << info->voltage_shift; ret = abx500_mask_and_set_register_interruptible(info->dev, info->voltage_bank, info->voltage_reg, info->voltage_mask, regval); @@ -238,13 +237,6 @@ static int ab8500_regulator_set_voltage_sel(struct regulator_dev *rdev, return ret; } -static int ab8500_regulator_enable_time(struct regulator_dev *rdev) -{ - struct ab8500_regulator_info *info = rdev_get_drvdata(rdev); - - return info->delay; -} - static int ab8500_regulator_set_voltage_time_sel(struct regulator_dev *rdev, unsigned int old_sel, unsigned int new_sel) @@ -261,22 +253,14 @@ static struct regulator_ops ab8500_regulator_ops = { .get_voltage_sel = ab8500_regulator_get_voltage_sel, .set_voltage_sel = ab8500_regulator_set_voltage_sel, .list_voltage = regulator_list_voltage_table, - .enable_time = ab8500_regulator_enable_time, .set_voltage_time_sel = ab8500_regulator_set_voltage_time_sel, }; -static int ab8500_fixed_get_voltage(struct regulator_dev *rdev) -{ - return rdev->desc->min_uV; -} - static struct regulator_ops ab8500_regulator_fixed_ops = { .enable = ab8500_regulator_enable, .disable = ab8500_regulator_disable, .is_enabled = ab8500_regulator_is_enabled, - .get_voltage = ab8500_fixed_get_voltage, .list_voltage = regulator_list_voltage_linear, - .enable_time = ab8500_regulator_enable_time, }; static struct ab8500_regulator_info @@ -358,6 +342,7 @@ static struct ab8500_regulator_info .voltage_bank = 0x03, .voltage_reg = 0x80, .voltage_mask = 0x38, + .voltage_shift = 3, }, /* @@ -374,6 +359,7 @@ static struct ab8500_regulator_info .owner = THIS_MODULE, .n_voltages = 1, .min_uV = 2000000, + .enable_time = 10000, }, .delay = 10000, .update_bank = 0x03, diff --git a/drivers/regulator/arizona-ldo1.c b/drivers/regulator/arizona-ldo1.c index c8f95c07adb..d184aa35abc 100644 --- a/drivers/regulator/arizona-ldo1.c +++ b/drivers/regulator/arizona-ldo1.c @@ -39,6 +39,8 @@ static struct regulator_ops arizona_ldo1_ops = { .map_voltage = regulator_map_voltage_linear, .get_voltage_sel = regulator_get_voltage_sel_regmap, .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_bypass = regulator_get_bypass_regmap, + .set_bypass = regulator_set_bypass_regmap, }; static const struct regulator_desc arizona_ldo1 = { @@ -49,9 +51,11 @@ static const struct regulator_desc arizona_ldo1 = { .vsel_reg = ARIZONA_LDO1_CONTROL_1, .vsel_mask = ARIZONA_LDO1_VSEL_MASK, + .bypass_reg = ARIZONA_LDO1_CONTROL_1, + .bypass_mask = ARIZONA_LDO1_BYPASS, .min_uV = 900000, .uV_step = 50000, - .n_voltages = 7, + .n_voltages = 6, .owner = THIS_MODULE, }; diff --git a/drivers/regulator/arizona-micsupp.c b/drivers/regulator/arizona-micsupp.c index 450a069aa9b..d9b1f82cc5b 100644 --- a/drivers/regulator/arizona-micsupp.c +++ b/drivers/regulator/arizona-micsupp.c @@ -82,6 +82,9 @@ static struct regulator_ops arizona_micsupp_ops = { .get_voltage_sel = regulator_get_voltage_sel_regmap, .set_voltage_sel = regulator_set_voltage_sel_regmap, + + .get_bypass = regulator_get_bypass_regmap, + .set_bypass = regulator_set_bypass_regmap, }; static const struct regulator_desc arizona_micsupp = { @@ -95,6 +98,8 @@ static const struct regulator_desc arizona_micsupp = { .vsel_mask = ARIZONA_LDO2_VSEL_MASK, .enable_reg = ARIZONA_MIC_CHARGE_PUMP_1, .enable_mask = ARIZONA_CPMIC_ENA, + .bypass_reg = ARIZONA_MIC_CHARGE_PUMP_1, + .bypass_mask = ARIZONA_CPMIC_BYPASS, .owner = THIS_MODULE, }; diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 48385318175..2e0352dc26b 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -77,6 +77,7 @@ struct regulator { struct device *dev; struct list_head list; unsigned int always_on:1; + unsigned int bypass:1; int uA_load; int min_uV; int max_uV; @@ -394,6 +395,9 @@ static ssize_t regulator_status_show(struct device *dev, case REGULATOR_STATUS_STANDBY: label = "standby"; break; + case REGULATOR_STATUS_BYPASS: + label = "bypass"; + break; case REGULATOR_STATUS_UNDEFINED: label = "undefined"; break; @@ -585,6 +589,27 @@ static ssize_t regulator_suspend_standby_state_show(struct device *dev, static DEVICE_ATTR(suspend_standby_state, 0444, regulator_suspend_standby_state_show, NULL); +static ssize_t regulator_bypass_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct regulator_dev *rdev = dev_get_drvdata(dev); + const char *report; + bool bypass; + int ret; + + ret = rdev->desc->ops->get_bypass(rdev, &bypass); + + if (ret != 0) + report = "unknown"; + else if (bypass) + report = "enabled"; + else + report = "disabled"; + + return sprintf(buf, "%s\n", report); +} +static DEVICE_ATTR(bypass, 0444, + regulator_bypass_show, NULL); /* * These are the only attributes are present for all regulators. @@ -778,6 +803,9 @@ static void print_constraints(struct regulator_dev *rdev) if (constraints->valid_modes_mask & REGULATOR_MODE_STANDBY) count += sprintf(buf + count, "standby"); + if (!count) + sprintf(buf, "no parameters"); + rdev_info(rdev, "%s\n", buf); if ((constraints->min_uV != constraints->max_uV) && @@ -974,6 +1002,7 @@ static int set_supply(struct regulator_dev *rdev, err = -ENOMEM; return err; } + supply_rdev->open_count++; return 0; } @@ -1720,6 +1749,9 @@ int regulator_disable_deferred(struct regulator *regulator, int ms) if (regulator->always_on) return 0; + if (!ms) + return regulator_disable(regulator); + mutex_lock(&rdev->mutex); rdev->deferred_disables++; mutex_unlock(&rdev->mutex); @@ -2178,9 +2210,12 @@ static int _regulator_do_set_voltage(struct regulator_dev *rdev, } } - if (ret == 0 && best_val >= 0) + if (ret == 0 && best_val >= 0) { + unsigned long data = best_val; + _notifier_call_chain(rdev, REGULATOR_EVENT_VOLTAGE_CHANGE, - (void *)best_val); + (void *)data); + } trace_regulator_set_voltage_complete(rdev_get_name(rdev), best_val); @@ -2291,8 +2326,8 @@ int regulator_set_voltage_time(struct regulator *regulator, EXPORT_SYMBOL_GPL(regulator_set_voltage_time); /** - *regulator_set_voltage_time_sel - get raise/fall time - * @regulator: regulator source + * regulator_set_voltage_time_sel - get raise/fall time + * @rdev: regulator source device * @old_selector: selector for starting voltage * @new_selector: selector for target voltage * @@ -2388,6 +2423,8 @@ static int _regulator_get_voltage(struct regulator_dev *rdev) ret = rdev->desc->ops->list_voltage(rdev, sel); } else if (rdev->desc->ops->get_voltage) { ret = rdev->desc->ops->get_voltage(rdev); + } else if (rdev->desc->ops->list_voltage) { + ret = rdev->desc->ops->list_voltage(rdev, 0); } else { return -EINVAL; } @@ -2674,6 +2711,100 @@ out: EXPORT_SYMBOL_GPL(regulator_set_optimum_mode); /** + * regulator_set_bypass_regmap - Default set_bypass() using regmap + * + * @rdev: device to operate on. + * @enable: state to set. + */ +int regulator_set_bypass_regmap(struct regulator_dev *rdev, bool enable) +{ + unsigned int val; + + if (enable) + val = rdev->desc->bypass_mask; + else + val = 0; + + return regmap_update_bits(rdev->regmap, rdev->desc->bypass_reg, + rdev->desc->bypass_mask, val); +} +EXPORT_SYMBOL_GPL(regulator_set_bypass_regmap); + +/** + * regulator_get_bypass_regmap - Default get_bypass() using regmap + * + * @rdev: device to operate on. + * @enable: current state. + */ +int regulator_get_bypass_regmap(struct regulator_dev *rdev, bool *enable) +{ + unsigned int val; + int ret; + + ret = regmap_read(rdev->regmap, rdev->desc->bypass_reg, &val); + if (ret != 0) + return ret; + + *enable = val & rdev->desc->bypass_mask; + + return 0; +} +EXPORT_SYMBOL_GPL(regulator_get_bypass_regmap); + +/** + * regulator_allow_bypass - allow the regulator to go into bypass mode + * + * @regulator: Regulator to configure + * @allow: enable or disable bypass mode + * + * Allow the regulator to go into bypass mode if all other consumers + * for the regulator also enable bypass mode and the machine + * constraints allow this. Bypass mode means that the regulator is + * simply passing the input directly to the output with no regulation. + */ +int regulator_allow_bypass(struct regulator *regulator, bool enable) +{ + struct regulator_dev *rdev = regulator->rdev; + int ret = 0; + + if (!rdev->desc->ops->set_bypass) + return 0; + + if (rdev->constraints && + !(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_BYPASS)) + return 0; + + mutex_lock(&rdev->mutex); + + if (enable && !regulator->bypass) { + rdev->bypass_count++; + + if (rdev->bypass_count == rdev->open_count) { + ret = rdev->desc->ops->set_bypass(rdev, enable); + if (ret != 0) + rdev->bypass_count--; + } + + } else if (!enable && regulator->bypass) { + rdev->bypass_count--; + + if (rdev->bypass_count != rdev->open_count) { + ret = rdev->desc->ops->set_bypass(rdev, enable); + if (ret != 0) + rdev->bypass_count++; + } + } + + if (ret == 0) + regulator->bypass = enable; + + mutex_unlock(&rdev->mutex); + + return ret; +} +EXPORT_SYMBOL_GPL(regulator_allow_bypass); + +/** * regulator_register_notifier - register regulator event notifier * @regulator: regulator source * @nb: notifier block @@ -3011,7 +3142,8 @@ static int add_regulator_attributes(struct regulator_dev *rdev) /* some attributes need specific methods to be displayed */ if ((ops->get_voltage && ops->get_voltage(rdev) >= 0) || - (ops->get_voltage_sel && ops->get_voltage_sel(rdev) >= 0)) { + (ops->get_voltage_sel && ops->get_voltage_sel(rdev) >= 0) || + (ops->list_voltage && ops->list_voltage(rdev, 0) >= 0)) { status = device_create_file(dev, &dev_attr_microvolts); if (status < 0) return status; @@ -3036,6 +3168,11 @@ static int add_regulator_attributes(struct regulator_dev *rdev) if (status < 0) return status; } + if (ops->get_bypass) { + status = device_create_file(dev, &dev_attr_bypass); + if (status < 0) + return status; + } /* some attributes are type-specific */ if (rdev->desc->type == REGULATOR_CURRENT) { @@ -3124,6 +3261,8 @@ static void rdev_init_debugfs(struct regulator_dev *rdev) &rdev->use_count); debugfs_create_u32("open_count", 0444, rdev->debugfs, &rdev->open_count); + debugfs_create_u32("bypass_count", 0444, rdev->debugfs, + &rdev->bypass_count); } /** @@ -3189,8 +3328,10 @@ regulator_register(const struct regulator_desc *regulator_desc, rdev->desc = regulator_desc; if (config->regmap) rdev->regmap = config->regmap; - else + else if (dev_get_regmap(dev, NULL)) rdev->regmap = dev_get_regmap(dev, NULL); + else if (dev->parent) + rdev->regmap = dev_get_regmap(dev->parent, NULL); INIT_LIST_HEAD(&rdev->consumer_list); INIT_LIST_HEAD(&rdev->list); BLOCKING_INIT_NOTIFIER_HEAD(&rdev->notifier); diff --git a/drivers/regulator/da9052-regulator.c b/drivers/regulator/da9052-regulator.c index 903299cf15c..27355b1199e 100644 --- a/drivers/regulator/da9052-regulator.c +++ b/drivers/regulator/da9052-regulator.c @@ -133,8 +133,8 @@ static int da9052_dcdc_set_current_limit(struct regulator_dev *rdev, int min_uA, max_uA < da9052_current_limits[row][DA9052_MIN_UA]) return -EINVAL; - for (i = 0; i < DA9052_CURRENT_RANGE; i++) { - if (min_uA <= da9052_current_limits[row][i]) { + for (i = DA9052_CURRENT_RANGE - 1; i >= 0; i--) { + if (da9052_current_limits[row][i] <= max_uA) { reg_val = i; break; } diff --git a/drivers/regulator/dummy.c b/drivers/regulator/dummy.c index 86f655c7f7a..03a1d7c11ef 100644 --- a/drivers/regulator/dummy.c +++ b/drivers/regulator/dummy.c @@ -30,7 +30,7 @@ static struct regulator_init_data dummy_initdata; static struct regulator_ops dummy_ops; static struct regulator_desc dummy_desc = { - .name = "dummy", + .name = "regulator-dummy", .id = -1, .type = REGULATOR_VOLTAGE, .owner = THIS_MODULE, diff --git a/drivers/regulator/fan53555.c b/drivers/regulator/fan53555.c new file mode 100644 index 00000000000..339f4d732e9 --- /dev/null +++ b/drivers/regulator/fan53555.c @@ -0,0 +1,322 @@ +/* + * FAN53555 Fairchild Digitally Programmable TinyBuck Regulator Driver. + * + * Supported Part Numbers: + * FAN53555UC00X/01X/03X/04X/05X + * + * Copyright (c) 2012 Marvell Technology Ltd. + * Yunfan Zhang <yfzhang@marvell.com> + * + * This package is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#include <linux/module.h> +#include <linux/param.h> +#include <linux/err.h> +#include <linux/platform_device.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/machine.h> +#include <linux/i2c.h> +#include <linux/slab.h> +#include <linux/regmap.h> +#include <linux/regulator/fan53555.h> + +/* Voltage setting */ +#define FAN53555_VSEL0 0x00 +#define FAN53555_VSEL1 0x01 +/* Control register */ +#define FAN53555_CONTROL 0x02 +/* IC Type */ +#define FAN53555_ID1 0x03 +/* IC mask version */ +#define FAN53555_ID2 0x04 +/* Monitor register */ +#define FAN53555_MONITOR 0x05 + +/* VSEL bit definitions */ +#define VSEL_BUCK_EN (1 << 7) +#define VSEL_MODE (1 << 6) +#define VSEL_NSEL_MASK 0x3F +/* Chip ID and Verison */ +#define DIE_ID 0x0F /* ID1 */ +#define DIE_REV 0x0F /* ID2 */ +/* Control bit definitions */ +#define CTL_OUTPUT_DISCHG (1 << 7) +#define CTL_SLEW_MASK (0x7 << 4) +#define CTL_SLEW_SHIFT 4 +#define CTL_RESET (1 << 2) + +#define FAN53555_NVOLTAGES 64 /* Numbers of voltages */ + +/* IC Type */ +enum { + FAN53555_CHIP_ID_00 = 0, + FAN53555_CHIP_ID_01, + FAN53555_CHIP_ID_02, + FAN53555_CHIP_ID_03, + FAN53555_CHIP_ID_04, + FAN53555_CHIP_ID_05, +}; + +struct fan53555_device_info { + struct regmap *regmap; + struct device *dev; + struct regulator_desc desc; + struct regulator_dev *rdev; + struct regulator_init_data *regulator; + /* IC Type and Rev */ + int chip_id; + int chip_rev; + /* Voltage setting register */ + unsigned int vol_reg; + unsigned int sleep_reg; + /* Voltage range and step(linear) */ + unsigned int vsel_min; + unsigned int vsel_step; + /* Voltage slew rate limiting */ + unsigned int slew_rate; + /* Sleep voltage cache */ + unsigned int sleep_vol_cache; +}; + +static int fan53555_set_suspend_voltage(struct regulator_dev *rdev, int uV) +{ + struct fan53555_device_info *di = rdev_get_drvdata(rdev); + int ret; + + if (di->sleep_vol_cache == uV) + return 0; + ret = regulator_map_voltage_linear(rdev, uV, uV); + if (ret < 0) + return -EINVAL; + ret = regmap_update_bits(di->regmap, di->sleep_reg, + VSEL_NSEL_MASK, ret); + if (ret < 0) + return -EINVAL; + /* Cache the sleep voltage setting. + * Might not be the real voltage which is rounded */ + di->sleep_vol_cache = uV; + + return 0; +} + +static int fan53555_set_mode(struct regulator_dev *rdev, unsigned int mode) +{ + struct fan53555_device_info *di = rdev_get_drvdata(rdev); + + switch (mode) { + case REGULATOR_MODE_FAST: + regmap_update_bits(di->regmap, di->vol_reg, + VSEL_MODE, VSEL_MODE); + break; + case REGULATOR_MODE_NORMAL: + regmap_update_bits(di->regmap, di->vol_reg, VSEL_MODE, 0); + break; + default: + return -EINVAL; + } + return 0; +} + +static unsigned int fan53555_get_mode(struct regulator_dev *rdev) +{ + struct fan53555_device_info *di = rdev_get_drvdata(rdev); + unsigned int val; + int ret = 0; + + ret = regmap_read(di->regmap, di->vol_reg, &val); + if (ret < 0) + return ret; + if (val & VSEL_MODE) + return REGULATOR_MODE_FAST; + else + return REGULATOR_MODE_NORMAL; +} + +static struct regulator_ops fan53555_regulator_ops = { + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .map_voltage = regulator_map_voltage_linear, + .list_voltage = regulator_list_voltage_linear, + .set_suspend_voltage = fan53555_set_suspend_voltage, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .set_mode = fan53555_set_mode, + .get_mode = fan53555_get_mode, +}; + +/* For 00,01,03,05 options: + * VOUT = 0.60V + NSELx * 10mV, from 0.60 to 1.23V. + * For 04 option: + * VOUT = 0.603V + NSELx * 12.826mV, from 0.603 to 1.411V. + * */ +static int fan53555_device_setup(struct fan53555_device_info *di, + struct fan53555_platform_data *pdata) +{ + unsigned int reg, data, mask; + + /* Setup voltage control register */ + switch (pdata->sleep_vsel_id) { + case FAN53555_VSEL_ID_0: + di->sleep_reg = FAN53555_VSEL0; + di->vol_reg = FAN53555_VSEL1; + break; + case FAN53555_VSEL_ID_1: + di->sleep_reg = FAN53555_VSEL1; + di->vol_reg = FAN53555_VSEL0; + break; + default: + dev_err(di->dev, "Invalid VSEL ID!\n"); + return -EINVAL; + } + /* Init voltage range and step */ + switch (di->chip_id) { + case FAN53555_CHIP_ID_00: + case FAN53555_CHIP_ID_01: + case FAN53555_CHIP_ID_03: + case FAN53555_CHIP_ID_05: + di->vsel_min = 600000; + di->vsel_step = 10000; + break; + case FAN53555_CHIP_ID_04: + di->vsel_min = 603000; + di->vsel_step = 12826; + break; + default: + dev_err(di->dev, + "Chip ID[%d]\n not supported!\n", di->chip_id); + return -EINVAL; + } + /* Init slew rate */ + if (pdata->slew_rate & 0x7) + di->slew_rate = pdata->slew_rate; + else + di->slew_rate = FAN53555_SLEW_RATE_64MV; + reg = FAN53555_CONTROL; + data = di->slew_rate << CTL_SLEW_SHIFT; + mask = CTL_SLEW_MASK; + return regmap_update_bits(di->regmap, reg, mask, data); +} + +static int fan53555_regulator_register(struct fan53555_device_info *di, + struct regulator_config *config) +{ + struct regulator_desc *rdesc = &di->desc; + + rdesc->name = "fan53555-reg"; + rdesc->ops = &fan53555_regulator_ops; + rdesc->type = REGULATOR_VOLTAGE; + rdesc->n_voltages = FAN53555_NVOLTAGES; + rdesc->enable_reg = di->vol_reg; + rdesc->enable_mask = VSEL_BUCK_EN; + rdesc->min_uV = di->vsel_min; + rdesc->uV_step = di->vsel_step; + rdesc->vsel_reg = di->vol_reg; + rdesc->vsel_mask = VSEL_NSEL_MASK; + rdesc->owner = THIS_MODULE; + + di->rdev = regulator_register(&di->desc, config); + if (IS_ERR(di->rdev)) + return PTR_ERR(di->rdev); + return 0; + +} + +static struct regmap_config fan53555_regmap_config = { + .reg_bits = 8, + .val_bits = 8, +}; + +static int __devinit fan53555_regulator_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct fan53555_device_info *di; + struct fan53555_platform_data *pdata; + struct regulator_config config = { }; + unsigned int val; + int ret; + + pdata = client->dev.platform_data; + if (!pdata || !pdata->regulator) { + dev_err(&client->dev, "Platform data not found!\n"); + return -ENODEV; + } + + di = devm_kzalloc(&client->dev, sizeof(struct fan53555_device_info), + GFP_KERNEL); + if (!di) { + dev_err(&client->dev, "Failed to allocate device info data!\n"); + return -ENOMEM; + } + di->regmap = devm_regmap_init_i2c(client, &fan53555_regmap_config); + if (IS_ERR(di->regmap)) { + dev_err(&client->dev, "Failed to allocate regmap!\n"); + return PTR_ERR(di->regmap); + } + di->dev = &client->dev; + di->regulator = pdata->regulator; + i2c_set_clientdata(client, di); + /* Get chip ID */ + ret = regmap_read(di->regmap, FAN53555_ID1, &val); + if (ret < 0) { + dev_err(&client->dev, "Failed to get chip ID!\n"); + return -ENODEV; + } + di->chip_id = val & DIE_ID; + /* Get chip revision */ + ret = regmap_read(di->regmap, FAN53555_ID2, &val); + if (ret < 0) { + dev_err(&client->dev, "Failed to get chip Rev!\n"); + return -ENODEV; + } + di->chip_rev = val & DIE_REV; + dev_info(&client->dev, "FAN53555 Option[%d] Rev[%d] Detected!\n", + di->chip_id, di->chip_rev); + /* Device init */ + ret = fan53555_device_setup(di, pdata); + if (ret < 0) { + dev_err(&client->dev, "Failed to setup device!\n"); + return ret; + } + /* Register regulator */ + config.dev = di->dev; + config.init_data = di->regulator; + config.regmap = di->regmap; + config.driver_data = di; + ret = fan53555_regulator_register(di, &config); + if (ret < 0) + dev_err(&client->dev, "Failed to register regulator!\n"); + return ret; + +} + +static int __devexit fan53555_regulator_remove(struct i2c_client *client) +{ + struct fan53555_device_info *di = i2c_get_clientdata(client); + + regulator_unregister(di->rdev); + return 0; +} + +static const struct i2c_device_id fan53555_id[] = { + {"fan53555", -1}, + { }, +}; + +static struct i2c_driver fan53555_regulator_driver = { + .driver = { + .name = "fan53555-regulator", + }, + .probe = fan53555_regulator_probe, + .remove = __devexit_p(fan53555_regulator_remove), + .id_table = fan53555_id, +}; + +module_i2c_driver(fan53555_regulator_driver); + +MODULE_AUTHOR("Yunfan Zhang <yfzhang@marvell.com>"); +MODULE_DESCRIPTION("FAN53555 regulator driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/regulator/isl6271a-regulator.c b/drivers/regulator/isl6271a-regulator.c index 1d145a07ada..d8ecf49a577 100644 --- a/drivers/regulator/isl6271a-regulator.c +++ b/drivers/regulator/isl6271a-regulator.c @@ -73,13 +73,7 @@ static struct regulator_ops isl_core_ops = { .map_voltage = regulator_map_voltage_linear, }; -static int isl6271a_get_fixed_voltage(struct regulator_dev *dev) -{ - return dev->desc->min_uV; -} - static struct regulator_ops isl_fixed_ops = { - .get_voltage = isl6271a_get_fixed_voltage, .list_voltage = regulator_list_voltage_linear, }; diff --git a/drivers/regulator/lp872x.c b/drivers/regulator/lp872x.c index 212c38eaba7..708f4b6a17d 100644 --- a/drivers/regulator/lp872x.c +++ b/drivers/regulator/lp872x.c @@ -86,6 +86,10 @@ #define EXTERN_DVS_USED 0 #define MAX_DELAY 6 +/* Default DVS Mode */ +#define LP8720_DEFAULT_DVS 0 +#define LP8725_DEFAULT_DVS BIT(2) + /* dump registers in regmap-debugfs */ #define MAX_REGISTERS 0x0F @@ -269,9 +273,9 @@ static int lp872x_regulator_enable_time(struct regulator_dev *rdev) return val > MAX_DELAY ? 0 : val * time_step_us; } -static void lp872x_set_dvs(struct lp872x *lp, int gpio) +static void lp872x_set_dvs(struct lp872x *lp, enum lp872x_dvs_sel dvs_sel, + int gpio) { - enum lp872x_dvs_sel dvs_sel = lp->pdata->dvs->vsel; enum lp872x_dvs_state state; state = dvs_sel == SEL_V1 ? DVS_HIGH : DVS_LOW; @@ -339,10 +343,10 @@ static int lp872x_buck_set_voltage_sel(struct regulator_dev *rdev, struct lp872x *lp = rdev_get_drvdata(rdev); enum lp872x_regulator_id buck = rdev_get_id(rdev); u8 addr, mask = LP872X_VOUT_M; - struct lp872x_dvs *dvs = lp->pdata->dvs; + struct lp872x_dvs *dvs = lp->pdata ? lp->pdata->dvs : NULL; if (dvs && gpio_is_valid(dvs->gpio)) - lp872x_set_dvs(lp, dvs->gpio); + lp872x_set_dvs(lp, dvs->vsel, dvs->gpio); addr = lp872x_select_buck_vout_addr(lp, buck); if (!lp872x_is_valid_buck_addr(addr)) @@ -374,8 +378,8 @@ static int lp8725_buck_set_current_limit(struct regulator_dev *rdev, { struct lp872x *lp = rdev_get_drvdata(rdev); enum lp872x_regulator_id buck = rdev_get_id(rdev); - int i, max = ARRAY_SIZE(lp8725_buck_uA); - u8 addr, val; + int i; + u8 addr; switch (buck) { case LP8725_ID_BUCK1: @@ -388,17 +392,15 @@ static int lp8725_buck_set_current_limit(struct regulator_dev *rdev, return -EINVAL; } - for (i = 0 ; i < max ; i++) + for (i = ARRAY_SIZE(lp8725_buck_uA) - 1 ; i >= 0; i--) { if (lp8725_buck_uA[i] >= min_uA && lp8725_buck_uA[i] <= max_uA) - break; - - if (i == max) - return -EINVAL; - - val = i << LP8725_BUCK_CL_S; + return lp872x_update_bits(lp, addr, + LP8725_BUCK_CL_M, + i << LP8725_BUCK_CL_S); + } - return lp872x_update_bits(lp, addr, LP8725_BUCK_CL_M, val); + return -EINVAL; } static int lp8725_buck_get_current_limit(struct regulator_dev *rdev) @@ -727,39 +729,16 @@ static struct regulator_desc lp8725_regulator_desc[] = { }, }; -static int lp872x_check_dvs_validity(struct lp872x *lp) -{ - struct lp872x_dvs *dvs = lp->pdata->dvs; - u8 val = 0; - int ret; - - ret = lp872x_read_byte(lp, LP872X_GENERAL_CFG, &val); - if (ret) - return ret; - - ret = 0; - if (lp->chipid == LP8720) { - if (val & LP8720_EXT_DVS_M) - ret = dvs ? 0 : -EINVAL; - } else { - if ((val & LP8725_DVS1_M) == EXTERN_DVS_USED) - ret = dvs ? 0 : -EINVAL; - } - - return ret; -} - static int lp872x_init_dvs(struct lp872x *lp) { int ret, gpio; - struct lp872x_dvs *dvs = lp->pdata->dvs; + struct lp872x_dvs *dvs = lp->pdata ? lp->pdata->dvs : NULL; enum lp872x_dvs_state pinstate; + u8 mask[] = { LP8720_EXT_DVS_M, LP8725_DVS1_M | LP8725_DVS2_M }; + u8 default_dvs_mode[] = { LP8720_DEFAULT_DVS, LP8725_DEFAULT_DVS }; - ret = lp872x_check_dvs_validity(lp); - if (ret) { - dev_warn(lp->dev, "invalid dvs data: %d\n", ret); - return ret; - } + if (!dvs) + goto set_default_dvs_mode; gpio = dvs->gpio; if (!gpio_is_valid(gpio)) { @@ -778,6 +757,10 @@ static int lp872x_init_dvs(struct lp872x *lp) lp->dvs_gpio = gpio; return 0; + +set_default_dvs_mode: + return lp872x_update_bits(lp, LP872X_GENERAL_CFG, mask[lp->chipid], + default_dvs_mode[lp->chipid]); } static int lp872x_config(struct lp872x *lp) @@ -785,24 +768,29 @@ static int lp872x_config(struct lp872x *lp) struct lp872x_platform_data *pdata = lp->pdata; int ret; - if (!pdata->update_config) - return 0; + if (!pdata || !pdata->update_config) + goto init_dvs; ret = lp872x_write_byte(lp, LP872X_GENERAL_CFG, pdata->general_config); if (ret) return ret; +init_dvs: return lp872x_init_dvs(lp); } static struct regulator_init_data *lp872x_find_regulator_init_data(int id, struct lp872x *lp) { + struct lp872x_platform_data *pdata = lp->pdata; int i; + if (!pdata) + return NULL; + for (i = 0; i < lp->num_regulators; i++) { - if (lp->pdata->regulator_data[i].id == id) - return lp->pdata->regulator_data[i].init_data; + if (pdata->regulator_data[i].id == id) + return pdata->regulator_data[i].init_data; } return NULL; @@ -863,18 +851,12 @@ static const struct regmap_config lp872x_regmap_config = { static int lp872x_probe(struct i2c_client *cl, const struct i2c_device_id *id) { struct lp872x *lp; - struct lp872x_platform_data *pdata = cl->dev.platform_data; int ret, size, num_regulators; const int lp872x_num_regulators[] = { [LP8720] = LP8720_NUM_REGULATORS, [LP8725] = LP8725_NUM_REGULATORS, }; - if (!pdata) { - dev_err(&cl->dev, "no platform data\n"); - return -EINVAL; - } - lp = devm_kzalloc(&cl->dev, sizeof(struct lp872x), GFP_KERNEL); if (!lp) goto err_mem; @@ -894,7 +876,7 @@ static int lp872x_probe(struct i2c_client *cl, const struct i2c_device_id *id) } lp->dev = &cl->dev; - lp->pdata = pdata; + lp->pdata = cl->dev.platform_data; lp->chipid = id->driver_data; lp->num_regulators = num_regulators; i2c_set_clientdata(cl, lp); diff --git a/drivers/regulator/lp8788-buck.c b/drivers/regulator/lp8788-buck.c index 6356e821400..ba3e0aa402d 100644 --- a/drivers/regulator/lp8788-buck.c +++ b/drivers/regulator/lp8788-buck.c @@ -69,6 +69,9 @@ #define PIN_HIGH 1 #define ENABLE_TIME_USEC 32 +#define BUCK_FPWM_MASK(x) (1 << (x)) +#define BUCK_FPWM_SHIFT(x) (x) + enum lp8788_dvs_state { DVS_LOW = GPIOF_OUT_INIT_LOW, DVS_HIGH = GPIOF_OUT_INIT_HIGH, @@ -86,15 +89,9 @@ enum lp8788_buck_id { BUCK4, }; -struct lp8788_pwm_map { - u8 mask; - u8 shift; -}; - struct lp8788_buck { struct lp8788 *lp; struct regulator_dev *regulator; - struct lp8788_pwm_map *pmap; void *dvs; }; @@ -106,29 +103,6 @@ static const int lp8788_buck_vtbl[] = { 1950000, 2000000, }; -/* buck pwm mode selection : used for set/get_mode in regulator ops - * @forced pwm : fast mode - * @auto pwm : normal mode - */ -static struct lp8788_pwm_map buck_pmap[] = { - [BUCK1] = { - .mask = LP8788_FPWM_BUCK1_M, - .shift = LP8788_FPWM_BUCK1_S, - }, - [BUCK2] = { - .mask = LP8788_FPWM_BUCK2_M, - .shift = LP8788_FPWM_BUCK2_S, - }, - [BUCK3] = { - .mask = LP8788_FPWM_BUCK3_M, - .shift = LP8788_FPWM_BUCK3_S, - }, - [BUCK4] = { - .mask = LP8788_FPWM_BUCK4_M, - .shift = LP8788_FPWM_BUCK4_S, - }, -}; - static const u8 buck1_vout_addr[] = { LP8788_BUCK1_VOUT0, LP8788_BUCK1_VOUT1, LP8788_BUCK1_VOUT2, LP8788_BUCK1_VOUT3, @@ -347,41 +321,37 @@ static int lp8788_buck_enable_time(struct regulator_dev *rdev) static int lp8788_buck_set_mode(struct regulator_dev *rdev, unsigned int mode) { struct lp8788_buck *buck = rdev_get_drvdata(rdev); - struct lp8788_pwm_map *pmap = buck->pmap; - u8 val; - - if (!pmap) - return -EINVAL; + enum lp8788_buck_id id = rdev_get_id(rdev); + u8 mask, val; + mask = BUCK_FPWM_MASK(id); switch (mode) { case REGULATOR_MODE_FAST: - val = LP8788_FORCE_PWM << pmap->shift; + val = LP8788_FORCE_PWM << BUCK_FPWM_SHIFT(id); break; case REGULATOR_MODE_NORMAL: - val = LP8788_AUTO_PWM << pmap->shift; + val = LP8788_AUTO_PWM << BUCK_FPWM_SHIFT(id); break; default: return -EINVAL; } - return lp8788_update_bits(buck->lp, LP8788_BUCK_PWM, pmap->mask, val); + return lp8788_update_bits(buck->lp, LP8788_BUCK_PWM, mask, val); } static unsigned int lp8788_buck_get_mode(struct regulator_dev *rdev) { struct lp8788_buck *buck = rdev_get_drvdata(rdev); - struct lp8788_pwm_map *pmap = buck->pmap; + enum lp8788_buck_id id = rdev_get_id(rdev); u8 val; int ret; - if (!pmap) - return -EINVAL; - ret = lp8788_read_byte(buck->lp, LP8788_BUCK_PWM, &val); if (ret) return ret; - return val & pmap->mask ? REGULATOR_MODE_FAST : REGULATOR_MODE_NORMAL; + return val & BUCK_FPWM_MASK(id) ? + REGULATOR_MODE_FAST : REGULATOR_MODE_NORMAL; } static struct regulator_ops lp8788_buck12_ops = { @@ -459,27 +429,6 @@ static struct regulator_desc lp8788_buck_desc[] = { }, }; -static int lp8788_set_default_dvs_ctrl_mode(struct lp8788 *lp, - enum lp8788_buck_id id) -{ - u8 mask, val; - - switch (id) { - case BUCK1: - mask = LP8788_BUCK1_DVS_SEL_M; - val = LP8788_BUCK1_DVS_I2C; - break; - case BUCK2: - mask = LP8788_BUCK2_DVS_SEL_M; - val = LP8788_BUCK2_DVS_I2C; - break; - default: - return 0; - } - - return lp8788_update_bits(lp, LP8788_BUCK_DVS_SEL, mask, val); -} - static int _gpio_request(struct lp8788_buck *buck, int gpio, char *name) { struct device *dev = buck->lp->dev; @@ -530,6 +479,7 @@ static int lp8788_init_dvs(struct lp8788_buck *buck, enum lp8788_buck_id id) struct lp8788_platform_data *pdata = buck->lp->pdata; u8 mask[] = { LP8788_BUCK1_DVS_SEL_M, LP8788_BUCK2_DVS_SEL_M }; u8 val[] = { LP8788_BUCK1_DVS_PIN, LP8788_BUCK2_DVS_PIN }; + u8 default_dvs_mode[] = { LP8788_BUCK1_DVS_I2C, LP8788_BUCK2_DVS_I2C }; /* no dvs for buck3, 4 */ if (id == BUCK3 || id == BUCK4) @@ -550,7 +500,8 @@ static int lp8788_init_dvs(struct lp8788_buck *buck, enum lp8788_buck_id id) val[id]); set_default_dvs_mode: - return lp8788_set_default_dvs_ctrl_mode(buck->lp, id); + return lp8788_update_bits(buck->lp, LP8788_BUCK_DVS_SEL, mask[id], + default_dvs_mode[id]); } static __devinit int lp8788_buck_probe(struct platform_device *pdev) @@ -567,7 +518,6 @@ static __devinit int lp8788_buck_probe(struct platform_device *pdev) return -ENOMEM; buck->lp = lp; - buck->pmap = &buck_pmap[id]; ret = lp8788_init_dvs(buck, id); if (ret) diff --git a/drivers/regulator/lp8788-ldo.c b/drivers/regulator/lp8788-ldo.c index d2122e41a96..6796eeb47dc 100644 --- a/drivers/regulator/lp8788-ldo.c +++ b/drivers/regulator/lp8788-ldo.c @@ -496,6 +496,7 @@ static struct regulator_desc lp8788_dldo_desc[] = { .name = "dldo12", .id = DLDO12, .ops = &lp8788_ldo_voltage_fixed_ops, + .n_voltages = 1, .type = REGULATOR_VOLTAGE, .owner = THIS_MODULE, .enable_reg = LP8788_EN_LDO_B, @@ -521,6 +522,7 @@ static struct regulator_desc lp8788_aldo_desc[] = { .name = "aldo2", .id = ALDO2, .ops = &lp8788_ldo_voltage_fixed_ops, + .n_voltages = 1, .type = REGULATOR_VOLTAGE, .owner = THIS_MODULE, .enable_reg = LP8788_EN_LDO_B, @@ -530,6 +532,7 @@ static struct regulator_desc lp8788_aldo_desc[] = { .name = "aldo3", .id = ALDO3, .ops = &lp8788_ldo_voltage_fixed_ops, + .n_voltages = 1, .type = REGULATOR_VOLTAGE, .owner = THIS_MODULE, .enable_reg = LP8788_EN_LDO_B, @@ -539,6 +542,7 @@ static struct regulator_desc lp8788_aldo_desc[] = { .name = "aldo4", .id = ALDO4, .ops = &lp8788_ldo_voltage_fixed_ops, + .n_voltages = 1, .type = REGULATOR_VOLTAGE, .owner = THIS_MODULE, .enable_reg = LP8788_EN_LDO_B, @@ -548,6 +552,7 @@ static struct regulator_desc lp8788_aldo_desc[] = { .name = "aldo5", .id = ALDO5, .ops = &lp8788_ldo_voltage_fixed_ops, + .n_voltages = 1, .type = REGULATOR_VOLTAGE, .owner = THIS_MODULE, .enable_reg = LP8788_EN_LDO_C, @@ -583,6 +588,7 @@ static struct regulator_desc lp8788_aldo_desc[] = { .name = "aldo8", .id = ALDO8, .ops = &lp8788_ldo_voltage_fixed_ops, + .n_voltages = 1, .type = REGULATOR_VOLTAGE, .owner = THIS_MODULE, .enable_reg = LP8788_EN_LDO_C, @@ -592,6 +598,7 @@ static struct regulator_desc lp8788_aldo_desc[] = { .name = "aldo9", .id = ALDO9, .ops = &lp8788_ldo_voltage_fixed_ops, + .n_voltages = 1, .type = REGULATOR_VOLTAGE, .owner = THIS_MODULE, .enable_reg = LP8788_EN_LDO_C, @@ -601,6 +608,7 @@ static struct regulator_desc lp8788_aldo_desc[] = { .name = "aldo10", .id = ALDO10, .ops = &lp8788_ldo_voltage_fixed_ops, + .n_voltages = 1, .type = REGULATOR_VOLTAGE, .owner = THIS_MODULE, .enable_reg = LP8788_EN_LDO_C, diff --git a/drivers/regulator/max77686.c b/drivers/regulator/max77686.c index c564af6f05a..2a67d08658a 100644 --- a/drivers/regulator/max77686.c +++ b/drivers/regulator/max77686.c @@ -66,7 +66,7 @@ enum max77686_ramp_rate { }; struct max77686_data { - struct regulator_dev **rdev; + struct regulator_dev *rdev[MAX77686_REGULATORS]; }; static int max77686_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay) @@ -265,6 +265,7 @@ static int max77686_pmic_dt_parse_pdata(struct max77686_dev *iodev, rmatch.of_node = NULL; of_regulator_match(iodev->dev, regulators_np, &rmatch, 1); rdata[i].initdata = rmatch.init_data; + rdata[i].of_node = rmatch.of_node; } pdata->regulators = rdata; @@ -283,10 +284,8 @@ static __devinit int max77686_pmic_probe(struct platform_device *pdev) { struct max77686_dev *iodev = dev_get_drvdata(pdev->dev.parent); struct max77686_platform_data *pdata = dev_get_platdata(iodev->dev); - struct regulator_dev **rdev; struct max77686_data *max77686; - int i, size; - int ret = 0; + int i, ret = 0; struct regulator_config config = { }; dev_dbg(&pdev->dev, "%s\n", __func__); @@ -313,45 +312,38 @@ static __devinit int max77686_pmic_probe(struct platform_device *pdev) if (!max77686) return -ENOMEM; - size = sizeof(struct regulator_dev *) * MAX77686_REGULATORS; - max77686->rdev = devm_kzalloc(&pdev->dev, size, GFP_KERNEL); - if (!max77686->rdev) - return -ENOMEM; - - rdev = max77686->rdev; config.dev = &pdev->dev; config.regmap = iodev->regmap; platform_set_drvdata(pdev, max77686); for (i = 0; i < MAX77686_REGULATORS; i++) { config.init_data = pdata->regulators[i].initdata; + config.of_node = pdata->regulators[i].of_node; - rdev[i] = regulator_register(®ulators[i], &config); - if (IS_ERR(rdev[i])) { - ret = PTR_ERR(rdev[i]); + max77686->rdev[i] = regulator_register(®ulators[i], &config); + if (IS_ERR(max77686->rdev[i])) { + ret = PTR_ERR(max77686->rdev[i]); dev_err(&pdev->dev, "regulator init failed for %d\n", i); - rdev[i] = NULL; - goto err; + max77686->rdev[i] = NULL; + goto err; } } return 0; err: while (--i >= 0) - regulator_unregister(rdev[i]); + regulator_unregister(max77686->rdev[i]); return ret; } static int __devexit max77686_pmic_remove(struct platform_device *pdev) { struct max77686_data *max77686 = platform_get_drvdata(pdev); - struct regulator_dev **rdev = max77686->rdev; int i; for (i = 0; i < MAX77686_REGULATORS; i++) - if (rdev[i]) - regulator_unregister(rdev[i]); + regulator_unregister(max77686->rdev[i]); return 0; } diff --git a/drivers/regulator/max8907-regulator.c b/drivers/regulator/max8907-regulator.c new file mode 100644 index 00000000000..af7607515ab --- /dev/null +++ b/drivers/regulator/max8907-regulator.c @@ -0,0 +1,408 @@ +/* + * max8907-regulator.c -- support regulators in max8907 + * + * Copyright (C) 2010 Gyungoh Yoo <jack.yoo@maxim-ic.com> + * Copyright (C) 2010-2012, NVIDIA CORPORATION. All rights reserved. + * + * Portions based on drivers/regulator/tps65910-regulator.c, + * Copyright 2010 Texas Instruments Inc. + * Author: Graeme Gregory <gg@slimlogic.co.uk> + * Author: Jorge Eduardo Candelaria <jedu@slimlogic.co.uk> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/err.h> +#include <linux/init.h> +#include <linux/mfd/core.h> +#include <linux/mfd/max8907.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/of_regulator.h> +#include <linux/regmap.h> +#include <linux/slab.h> + +#define MAX8907_II2RR_VERSION_MASK 0xF0 +#define MAX8907_II2RR_VERSION_REV_A 0x00 +#define MAX8907_II2RR_VERSION_REV_B 0x10 +#define MAX8907_II2RR_VERSION_REV_C 0x30 + +struct max8907_regulator { + struct regulator_desc desc[MAX8907_NUM_REGULATORS]; + struct regulator_dev *rdev[MAX8907_NUM_REGULATORS]; +}; + +#define REG_MBATT() \ + [MAX8907_MBATT] = { \ + .name = "MBATT", \ + .supply_name = "mbatt", \ + .id = MAX8907_MBATT, \ + .ops = &max8907_mbatt_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + } + +#define REG_LDO(ids, supply, base, min, max, step) \ + [MAX8907_##ids] = { \ + .name = #ids, \ + .supply_name = supply, \ + .id = MAX8907_##ids, \ + .n_voltages = ((max) - (min)) / (step) + 1, \ + .ops = &max8907_ldo_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = (min), \ + .uV_step = (step), \ + .vsel_reg = (base) + MAX8907_VOUT, \ + .vsel_mask = 0x3f, \ + .enable_reg = (base) + MAX8907_CTL, \ + .enable_mask = MAX8907_MASK_LDO_EN, \ + } + +#define REG_FIXED(ids, supply, voltage) \ + [MAX8907_##ids] = { \ + .name = #ids, \ + .supply_name = supply, \ + .id = MAX8907_##ids, \ + .n_voltages = 1, \ + .ops = &max8907_fixed_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = (voltage), \ + } + +#define REG_OUT5V(ids, supply, base, voltage) \ + [MAX8907_##ids] = { \ + .name = #ids, \ + .supply_name = supply, \ + .id = MAX8907_##ids, \ + .n_voltages = 1, \ + .ops = &max8907_out5v_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = (voltage), \ + .enable_reg = (base), \ + .enable_mask = MAX8907_MASK_OUT5V_EN, \ + } + +#define REG_BBAT(ids, supply, base, min, max, step) \ + [MAX8907_##ids] = { \ + .name = #ids, \ + .supply_name = supply, \ + .id = MAX8907_##ids, \ + .n_voltages = ((max) - (min)) / (step) + 1, \ + .ops = &max8907_bbat_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = (min), \ + .uV_step = (step), \ + .vsel_reg = (base), \ + .vsel_mask = MAX8907_MASK_VBBATTCV, \ + } + +#define LDO_750_50(id, supply, base) REG_LDO(id, supply, (base), \ + 750000, 3900000, 50000) +#define LDO_650_25(id, supply, base) REG_LDO(id, supply, (base), \ + 650000, 2225000, 25000) + +static struct regulator_ops max8907_mbatt_ops = { +}; + +static struct regulator_ops max8907_ldo_ops = { + .list_voltage = regulator_list_voltage_linear, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, +}; + +static struct regulator_ops max8907_ldo_hwctl_ops = { + .list_voltage = regulator_list_voltage_linear, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, +}; + +static struct regulator_ops max8907_fixed_ops = { + .list_voltage = regulator_list_voltage_linear, +}; + +static struct regulator_ops max8907_out5v_ops = { + .list_voltage = regulator_list_voltage_linear, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, +}; + +static struct regulator_ops max8907_out5v_hwctl_ops = { + .list_voltage = regulator_list_voltage_linear, +}; + +static struct regulator_ops max8907_bbat_ops = { + .list_voltage = regulator_list_voltage_linear, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, +}; + +static struct regulator_desc max8907_regulators[] = { + REG_MBATT(), + REG_LDO(SD1, "in-v1", MAX8907_REG_SDCTL1, 650000, 2225000, 25000), + REG_LDO(SD2, "in-v2", MAX8907_REG_SDCTL2, 637500, 1425000, 12500), + REG_LDO(SD3, "in-v3", MAX8907_REG_SDCTL3, 750000, 3900000, 50000), + LDO_750_50(LDO1, "in1", MAX8907_REG_LDOCTL1), + LDO_650_25(LDO2, "in2", MAX8907_REG_LDOCTL2), + LDO_650_25(LDO3, "in3", MAX8907_REG_LDOCTL3), + LDO_750_50(LDO4, "in4", MAX8907_REG_LDOCTL4), + LDO_750_50(LDO5, "in5", MAX8907_REG_LDOCTL5), + LDO_750_50(LDO6, "in6", MAX8907_REG_LDOCTL6), + LDO_750_50(LDO7, "in7", MAX8907_REG_LDOCTL7), + LDO_750_50(LDO8, "in8", MAX8907_REG_LDOCTL8), + LDO_750_50(LDO9, "in9", MAX8907_REG_LDOCTL9), + LDO_750_50(LDO10, "in10", MAX8907_REG_LDOCTL10), + LDO_750_50(LDO11, "in11", MAX8907_REG_LDOCTL11), + LDO_750_50(LDO12, "in12", MAX8907_REG_LDOCTL12), + LDO_750_50(LDO13, "in13", MAX8907_REG_LDOCTL13), + LDO_750_50(LDO14, "in14", MAX8907_REG_LDOCTL14), + LDO_750_50(LDO15, "in15", MAX8907_REG_LDOCTL15), + LDO_750_50(LDO16, "in16", MAX8907_REG_LDOCTL16), + LDO_650_25(LDO17, "in17", MAX8907_REG_LDOCTL17), + LDO_650_25(LDO18, "in18", MAX8907_REG_LDOCTL18), + LDO_750_50(LDO19, "in19", MAX8907_REG_LDOCTL19), + LDO_750_50(LDO20, "in20", MAX8907_REG_LDOCTL20), + REG_OUT5V(OUT5V, "mbatt", MAX8907_REG_OUT5VEN, 5000000), + REG_OUT5V(OUT33V, "mbatt", MAX8907_REG_OUT33VEN, 3300000), + REG_BBAT(BBAT, "MBATT", MAX8907_REG_BBAT_CNFG, + 2400000, 3000000, 200000), + REG_FIXED(SDBY, "MBATT", 1200000), + REG_FIXED(VRTC, "MBATT", 3300000), +}; + +#ifdef CONFIG_OF + +#define MATCH(_name, _id) \ + [MAX8907_##_id] = { \ + .name = #_name, \ + .driver_data = (void *)&max8907_regulators[MAX8907_##_id], \ + } + +static struct of_regulator_match max8907_matches[] = { + MATCH(mbatt, MBATT), + MATCH(sd1, SD1), + MATCH(sd2, SD2), + MATCH(sd3, SD3), + MATCH(ldo1, LDO1), + MATCH(ldo2, LDO2), + MATCH(ldo3, LDO3), + MATCH(ldo4, LDO4), + MATCH(ldo5, LDO5), + MATCH(ldo6, LDO6), + MATCH(ldo7, LDO7), + MATCH(ldo8, LDO8), + MATCH(ldo9, LDO9), + MATCH(ldo10, LDO10), + MATCH(ldo11, LDO11), + MATCH(ldo12, LDO12), + MATCH(ldo13, LDO13), + MATCH(ldo14, LDO14), + MATCH(ldo15, LDO15), + MATCH(ldo16, LDO16), + MATCH(ldo17, LDO17), + MATCH(ldo18, LDO18), + MATCH(ldo19, LDO19), + MATCH(ldo20, LDO20), + MATCH(out5v, OUT5V), + MATCH(out33v, OUT33V), + MATCH(bbat, BBAT), + MATCH(sdby, SDBY), + MATCH(vrtc, VRTC), +}; + +static int max8907_regulator_parse_dt(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.parent->of_node; + struct device_node *regulators; + int ret; + + if (!pdev->dev.parent->of_node) + return 0; + + regulators = of_find_node_by_name(np, "regulators"); + if (!regulators) { + dev_err(&pdev->dev, "regulators node not found\n"); + return -EINVAL; + } + + ret = of_regulator_match(pdev->dev.parent, regulators, + max8907_matches, + ARRAY_SIZE(max8907_matches)); + if (ret < 0) { + dev_err(&pdev->dev, "Error parsing regulator init data: %d\n", + ret); + return ret; + } + + return 0; +} + +static inline struct regulator_init_data *match_init_data(int index) +{ + return max8907_matches[index].init_data; +} + +static inline struct device_node *match_of_node(int index) +{ + return max8907_matches[index].of_node; +} +#else +static int max8907_regulator_parse_dt(struct platform_device *pdev) +{ + return 0; +} + +static inline struct regulator_init_data *match_init_data(int index) +{ + return NULL; +} + +static inline struct device_node *match_of_node(int index) +{ + return NULL; +} +#endif + +static __devinit int max8907_regulator_probe(struct platform_device *pdev) +{ + struct max8907 *max8907 = dev_get_drvdata(pdev->dev.parent); + struct max8907_platform_data *pdata = dev_get_platdata(max8907->dev); + int ret; + struct max8907_regulator *pmic; + unsigned int val; + int i; + struct regulator_config config = {}; + struct regulator_init_data *idata; + const char *mbatt_rail_name = NULL; + + ret = max8907_regulator_parse_dt(pdev); + if (ret) + return ret; + + pmic = devm_kzalloc(&pdev->dev, sizeof(*pmic), GFP_KERNEL); + if (!pmic) { + dev_err(&pdev->dev, "Failed to alloc pmic\n"); + return -ENOMEM; + } + platform_set_drvdata(pdev, pmic); + + memcpy(pmic->desc, max8907_regulators, sizeof(pmic->desc)); + + /* Backwards compatibility with MAX8907B; SD1 uses different voltages */ + regmap_read(max8907->regmap_gen, MAX8907_REG_II2RR, &val); + if ((val & MAX8907_II2RR_VERSION_MASK) == + MAX8907_II2RR_VERSION_REV_B) { + pmic->desc[MAX8907_SD1].min_uV = 637500; + pmic->desc[MAX8907_SD1].uV_step = 12500; + pmic->desc[MAX8907_SD1].n_voltages = + (1425000 - 637500) / 12500 + 1; + } + + for (i = 0; i < MAX8907_NUM_REGULATORS; i++) { + config.dev = pdev->dev.parent; + if (pdata) + idata = pdata->init_data[i]; + else + idata = match_init_data(i); + config.init_data = idata; + config.driver_data = pmic; + config.regmap = max8907->regmap_gen; + config.of_node = match_of_node(i); + + switch (pmic->desc[i].id) { + case MAX8907_MBATT: + if (idata && idata->constraints.name) + mbatt_rail_name = idata->constraints.name; + else + mbatt_rail_name = pmic->desc[i].name; + break; + case MAX8907_BBAT: + case MAX8907_SDBY: + case MAX8907_VRTC: + idata->supply_regulator = mbatt_rail_name; + break; + } + + if (pmic->desc[i].ops == &max8907_ldo_ops) { + regmap_read(config.regmap, pmic->desc[i].enable_reg, + &val); + if ((val & MAX8907_MASK_LDO_SEQ) != + MAX8907_MASK_LDO_SEQ) + pmic->desc[i].ops = &max8907_ldo_hwctl_ops; + } else if (pmic->desc[i].ops == &max8907_out5v_ops) { + regmap_read(config.regmap, pmic->desc[i].enable_reg, + &val); + if ((val & (MAX8907_MASK_OUT5V_VINEN | + MAX8907_MASK_OUT5V_ENSRC)) != + MAX8907_MASK_OUT5V_ENSRC) + pmic->desc[i].ops = &max8907_out5v_hwctl_ops; + } + + pmic->rdev[i] = regulator_register(&pmic->desc[i], &config); + if (IS_ERR(pmic->rdev[i])) { + dev_err(&pdev->dev, + "failed to register %s regulator\n", + pmic->desc[i].name); + ret = PTR_ERR(pmic->rdev[i]); + goto err_unregister_regulator; + } + } + + return 0; + +err_unregister_regulator: + while (--i >= 0) + regulator_unregister(pmic->rdev[i]); + return ret; +} + +static __devexit int max8907_regulator_remove(struct platform_device *pdev) +{ + struct max8907_regulator *pmic = platform_get_drvdata(pdev); + int i; + + for (i = 0; i < MAX8907_NUM_REGULATORS; i++) + regulator_unregister(pmic->rdev[i]); + + return 0; +} + +static struct platform_driver max8907_regulator_driver = { + .driver = { + .name = "max8907-regulator", + .owner = THIS_MODULE, + }, + .probe = max8907_regulator_probe, + .remove = __devexit_p(max8907_regulator_remove), +}; + +static int __init max8907_regulator_init(void) +{ + return platform_driver_register(&max8907_regulator_driver); +} + +subsys_initcall(max8907_regulator_init); + +static void __exit max8907_reg_exit(void) +{ + platform_driver_unregister(&max8907_regulator_driver); +} + +module_exit(max8907_reg_exit); + +MODULE_DESCRIPTION("MAX8907 regulator driver"); +MODULE_AUTHOR("Gyungoh Yoo <jack.yoo@maxim-ic.com>"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:max8907-regulator"); diff --git a/drivers/regulator/mc13783-regulator.c b/drivers/regulator/mc13783-regulator.c index 4932e3449fe..0801a6d0c12 100644 --- a/drivers/regulator/mc13783-regulator.c +++ b/drivers/regulator/mc13783-regulator.c @@ -21,6 +21,30 @@ #include <linux/module.h> #include "mc13xxx.h" +#define MC13783_REG_SWITCHERS0 24 +/* Enable does not exist for SW1A */ +#define MC13783_REG_SWITCHERS0_SW1AEN 0 +#define MC13783_REG_SWITCHERS0_SW1AVSEL 0 +#define MC13783_REG_SWITCHERS0_SW1AVSEL_M (63 << 0) + +#define MC13783_REG_SWITCHERS1 25 +/* Enable does not exist for SW1B */ +#define MC13783_REG_SWITCHERS1_SW1BEN 0 +#define MC13783_REG_SWITCHERS1_SW1BVSEL 0 +#define MC13783_REG_SWITCHERS1_SW1BVSEL_M (63 << 0) + +#define MC13783_REG_SWITCHERS2 26 +/* Enable does not exist for SW2A */ +#define MC13783_REG_SWITCHERS2_SW2AEN 0 +#define MC13783_REG_SWITCHERS2_SW2AVSEL 0 +#define MC13783_REG_SWITCHERS2_SW2AVSEL_M (63 << 0) + +#define MC13783_REG_SWITCHERS3 27 +/* Enable does not exist for SW2B */ +#define MC13783_REG_SWITCHERS3_SW2BEN 0 +#define MC13783_REG_SWITCHERS3_SW2BVSEL 0 +#define MC13783_REG_SWITCHERS3_SW2BVSEL_M (63 << 0) + #define MC13783_REG_SWITCHERS5 29 #define MC13783_REG_SWITCHERS5_SW3EN (1 << 20) #define MC13783_REG_SWITCHERS5_SW3VSEL 18 @@ -93,6 +117,44 @@ /* Voltage Values */ +static const int mc13783_sw1x_val[] = { + 900000, 925000, 950000, 975000, + 1000000, 1025000, 1050000, 1075000, + 1100000, 1125000, 1150000, 1175000, + 1200000, 1225000, 1250000, 1275000, + 1300000, 1325000, 1350000, 1375000, + 1400000, 1425000, 1450000, 1475000, + 1500000, 1525000, 1550000, 1575000, + 1600000, 1625000, 1650000, 1675000, + 1700000, 1700000, 1700000, 1700000, + 1800000, 1800000, 1800000, 1800000, + 1850000, 1850000, 1850000, 1850000, + 2000000, 2000000, 2000000, 2000000, + 2100000, 2100000, 2100000, 2100000, + 2200000, 2200000, 2200000, 2200000, + 2200000, 2200000, 2200000, 2200000, + 2200000, 2200000, 2200000, 2200000, +}; + +static const int mc13783_sw2x_val[] = { + 900000, 925000, 950000, 975000, + 1000000, 1025000, 1050000, 1075000, + 1100000, 1125000, 1150000, 1175000, + 1200000, 1225000, 1250000, 1275000, + 1300000, 1325000, 1350000, 1375000, + 1400000, 1425000, 1450000, 1475000, + 1500000, 1525000, 1550000, 1575000, + 1600000, 1625000, 1650000, 1675000, + 1700000, 1700000, 1700000, 1700000, + 1800000, 1800000, 1800000, 1800000, + 1900000, 1900000, 1900000, 1900000, + 2000000, 2000000, 2000000, 2000000, + 2100000, 2100000, 2100000, 2100000, + 2200000, 2200000, 2200000, 2200000, + 2200000, 2200000, 2200000, 2200000, + 2200000, 2200000, 2200000, 2200000, +}; + static const unsigned int mc13783_sw3_val[] = { 5000000, 5000000, 5000000, 5500000, }; @@ -188,6 +250,10 @@ static struct regulator_ops mc13783_gpo_regulator_ops; MC13783_DEFINE(REG, _name, _reg, _vsel_reg, _voltages) static struct mc13xxx_regulator mc13783_regulators[] = { + MC13783_DEFINE_SW(SW1A, SWITCHERS0, SWITCHERS0, mc13783_sw1x_val), + MC13783_DEFINE_SW(SW1B, SWITCHERS1, SWITCHERS1, mc13783_sw1x_val), + MC13783_DEFINE_SW(SW2A, SWITCHERS2, SWITCHERS2, mc13783_sw2x_val), + MC13783_DEFINE_SW(SW2B, SWITCHERS3, SWITCHERS3, mc13783_sw2x_val), MC13783_DEFINE_SW(SW3, SWITCHERS5, SWITCHERS5, mc13783_sw3_val), MC13783_FIXED_DEFINE(REG, VAUDIO, REGULATORMODE0, mc13783_vaudio_val), @@ -238,9 +304,10 @@ static int mc13783_powermisc_rmw(struct mc13xxx_regulator_priv *priv, u32 mask, BUG_ON(val & ~mask); + mc13xxx_lock(priv->mc13xxx); ret = mc13xxx_reg_read(mc13783, MC13783_REG_POWERMISC, &valread); if (ret) - return ret; + goto out; /* Update the stored state for Power Gates. */ priv->powermisc_pwgt_state = @@ -253,7 +320,10 @@ static int mc13783_powermisc_rmw(struct mc13xxx_regulator_priv *priv, u32 mask, valread = (valread & ~MC13783_REG_POWERMISC_PWGTSPI_M) | priv->powermisc_pwgt_state; - return mc13xxx_reg_write(mc13783, MC13783_REG_POWERMISC, valread); + ret = mc13xxx_reg_write(mc13783, MC13783_REG_POWERMISC, valread); +out: + mc13xxx_unlock(priv->mc13xxx); + return ret; } static int mc13783_gpo_regulator_enable(struct regulator_dev *rdev) @@ -261,7 +331,6 @@ static int mc13783_gpo_regulator_enable(struct regulator_dev *rdev) struct mc13xxx_regulator_priv *priv = rdev_get_drvdata(rdev); struct mc13xxx_regulator *mc13xxx_regulators = priv->mc13xxx_regulators; int id = rdev_get_id(rdev); - int ret; u32 en_val = mc13xxx_regulators[id].enable_bit; dev_dbg(rdev_get_dev(rdev), "%s id: %d\n", __func__, id); @@ -271,12 +340,8 @@ static int mc13783_gpo_regulator_enable(struct regulator_dev *rdev) id == MC13783_REG_PWGT2SPI) en_val = 0; - mc13xxx_lock(priv->mc13xxx); - ret = mc13783_powermisc_rmw(priv, mc13xxx_regulators[id].enable_bit, + return mc13783_powermisc_rmw(priv, mc13xxx_regulators[id].enable_bit, en_val); - mc13xxx_unlock(priv->mc13xxx); - - return ret; } static int mc13783_gpo_regulator_disable(struct regulator_dev *rdev) @@ -284,7 +349,6 @@ static int mc13783_gpo_regulator_disable(struct regulator_dev *rdev) struct mc13xxx_regulator_priv *priv = rdev_get_drvdata(rdev); struct mc13xxx_regulator *mc13xxx_regulators = priv->mc13xxx_regulators; int id = rdev_get_id(rdev); - int ret; u32 dis_val = 0; dev_dbg(rdev_get_dev(rdev), "%s id: %d\n", __func__, id); @@ -294,12 +358,8 @@ static int mc13783_gpo_regulator_disable(struct regulator_dev *rdev) id == MC13783_REG_PWGT2SPI) dis_val = mc13xxx_regulators[id].enable_bit; - mc13xxx_lock(priv->mc13xxx); - ret = mc13783_powermisc_rmw(priv, mc13xxx_regulators[id].enable_bit, + return mc13783_powermisc_rmw(priv, mc13xxx_regulators[id].enable_bit, dis_val); - mc13xxx_unlock(priv->mc13xxx); - - return ret; } static int mc13783_gpo_regulator_is_enabled(struct regulator_dev *rdev) @@ -330,7 +390,6 @@ static struct regulator_ops mc13783_gpo_regulator_ops = { .is_enabled = mc13783_gpo_regulator_is_enabled, .list_voltage = regulator_list_voltage_table, .set_voltage = mc13xxx_fixed_regulator_set_voltage, - .get_voltage = mc13xxx_fixed_regulator_get_voltage, }; static int __devinit mc13783_regulator_probe(struct platform_device *pdev) diff --git a/drivers/regulator/mc13892-regulator.c b/drivers/regulator/mc13892-regulator.c index b388b746452..1fa63812f7a 100644 --- a/drivers/regulator/mc13892-regulator.c +++ b/drivers/regulator/mc13892-regulator.c @@ -305,9 +305,10 @@ static int mc13892_powermisc_rmw(struct mc13xxx_regulator_priv *priv, u32 mask, BUG_ON(val & ~mask); + mc13xxx_lock(priv->mc13xxx); ret = mc13xxx_reg_read(mc13892, MC13892_POWERMISC, &valread); if (ret) - return ret; + goto out; /* Update the stored state for Power Gates. */ priv->powermisc_pwgt_state = @@ -320,14 +321,16 @@ static int mc13892_powermisc_rmw(struct mc13xxx_regulator_priv *priv, u32 mask, valread = (valread & ~MC13892_POWERMISC_PWGTSPI_M) | priv->powermisc_pwgt_state; - return mc13xxx_reg_write(mc13892, MC13892_POWERMISC, valread); + ret = mc13xxx_reg_write(mc13892, MC13892_POWERMISC, valread); +out: + mc13xxx_unlock(priv->mc13xxx); + return ret; } static int mc13892_gpo_regulator_enable(struct regulator_dev *rdev) { struct mc13xxx_regulator_priv *priv = rdev_get_drvdata(rdev); int id = rdev_get_id(rdev); - int ret; u32 en_val = mc13892_regulators[id].enable_bit; u32 mask = mc13892_regulators[id].enable_bit; @@ -340,18 +343,13 @@ static int mc13892_gpo_regulator_enable(struct regulator_dev *rdev) if (id == MC13892_GPO4) mask |= MC13892_POWERMISC_GPO4ADINEN; - mc13xxx_lock(priv->mc13xxx); - ret = mc13892_powermisc_rmw(priv, mask, en_val); - mc13xxx_unlock(priv->mc13xxx); - - return ret; + return mc13892_powermisc_rmw(priv, mask, en_val); } static int mc13892_gpo_regulator_disable(struct regulator_dev *rdev) { struct mc13xxx_regulator_priv *priv = rdev_get_drvdata(rdev); int id = rdev_get_id(rdev); - int ret; u32 dis_val = 0; dev_dbg(rdev_get_dev(rdev), "%s id: %d\n", __func__, id); @@ -360,12 +358,8 @@ static int mc13892_gpo_regulator_disable(struct regulator_dev *rdev) if (id == MC13892_PWGT1SPI || id == MC13892_PWGT2SPI) dis_val = mc13892_regulators[id].enable_bit; - mc13xxx_lock(priv->mc13xxx); - ret = mc13892_powermisc_rmw(priv, mc13892_regulators[id].enable_bit, + return mc13892_powermisc_rmw(priv, mc13892_regulators[id].enable_bit, dis_val); - mc13xxx_unlock(priv->mc13xxx); - - return ret; } static int mc13892_gpo_regulator_is_enabled(struct regulator_dev *rdev) @@ -396,14 +390,13 @@ static struct regulator_ops mc13892_gpo_regulator_ops = { .is_enabled = mc13892_gpo_regulator_is_enabled, .list_voltage = regulator_list_voltage_table, .set_voltage = mc13xxx_fixed_regulator_set_voltage, - .get_voltage = mc13xxx_fixed_regulator_get_voltage, }; -static int mc13892_sw_regulator_get_voltage(struct regulator_dev *rdev) +static int mc13892_sw_regulator_get_voltage_sel(struct regulator_dev *rdev) { struct mc13xxx_regulator_priv *priv = rdev_get_drvdata(rdev); int ret, id = rdev_get_id(rdev); - unsigned int val, hi; + unsigned int val; dev_dbg(rdev_get_dev(rdev), "%s id: %d\n", __func__, id); @@ -414,17 +407,11 @@ static int mc13892_sw_regulator_get_voltage(struct regulator_dev *rdev) if (ret) return ret; - hi = val & MC13892_SWITCHERS0_SWxHI; val = (val & mc13892_regulators[id].vsel_mask) >> mc13892_regulators[id].vsel_shift; dev_dbg(rdev_get_dev(rdev), "%s id: %d val: %d\n", __func__, id, val); - if (hi) - val = (25000 * val) + 1100000; - else - val = (25000 * val) + 600000; - return val; } @@ -432,37 +419,25 @@ static int mc13892_sw_regulator_set_voltage_sel(struct regulator_dev *rdev, unsigned selector) { struct mc13xxx_regulator_priv *priv = rdev_get_drvdata(rdev); - int hi, value, mask, id = rdev_get_id(rdev); - u32 valread; + int volt, mask, id = rdev_get_id(rdev); + u32 reg_value; int ret; - value = rdev->desc->volt_table[selector]; + volt = rdev->desc->volt_table[selector]; + mask = mc13892_regulators[id].vsel_mask; + reg_value = selector << mc13892_regulators[id].vsel_shift; + + if (volt > 1375000) { + mask |= MC13892_SWITCHERS0_SWxHI; + reg_value |= MC13892_SWITCHERS0_SWxHI; + } else if (volt < 1100000) { + mask |= MC13892_SWITCHERS0_SWxHI; + reg_value &= ~MC13892_SWITCHERS0_SWxHI; + } mc13xxx_lock(priv->mc13xxx); - ret = mc13xxx_reg_read(priv->mc13xxx, - mc13892_regulators[id].vsel_reg, &valread); - if (ret) - goto err; - - if (value > 1375000) - hi = 1; - else if (value < 1100000) - hi = 0; - else - hi = valread & MC13892_SWITCHERS0_SWxHI; - - if (hi) { - value = (value - 1100000) / 25000; - value |= MC13892_SWITCHERS0_SWxHI; - } else - value = (value - 600000) / 25000; - - mask = mc13892_regulators[id].vsel_mask | MC13892_SWITCHERS0_SWxHI; - valread = (valread & ~mask) | - (value << mc13892_regulators[id].vsel_shift); - ret = mc13xxx_reg_write(priv->mc13xxx, mc13892_regulators[id].vsel_reg, - valread); -err: + ret = mc13xxx_reg_rmw(priv->mc13xxx, mc13892_regulators[id].reg, mask, + reg_value); mc13xxx_unlock(priv->mc13xxx); return ret; @@ -471,7 +446,7 @@ err: static struct regulator_ops mc13892_sw_regulator_ops = { .list_voltage = regulator_list_voltage_table, .set_voltage_sel = mc13892_sw_regulator_set_voltage_sel, - .get_voltage = mc13892_sw_regulator_get_voltage, + .get_voltage_sel = mc13892_sw_regulator_get_voltage_sel, }; static int mc13892_vcam_set_mode(struct regulator_dev *rdev, unsigned int mode) diff --git a/drivers/regulator/mc13xxx-regulator-core.c b/drivers/regulator/mc13xxx-regulator-core.c index d6eda28ca5d..88cbb832d55 100644 --- a/drivers/regulator/mc13xxx-regulator-core.c +++ b/drivers/regulator/mc13xxx-regulator-core.c @@ -143,30 +143,21 @@ int mc13xxx_fixed_regulator_set_voltage(struct regulator_dev *rdev, int min_uV, __func__, id, min_uV, max_uV); if (min_uV <= rdev->desc->volt_table[0] && - rdev->desc->volt_table[0] <= max_uV) + rdev->desc->volt_table[0] <= max_uV) { + *selector = 0; return 0; - else + } else { return -EINVAL; + } } EXPORT_SYMBOL_GPL(mc13xxx_fixed_regulator_set_voltage); -int mc13xxx_fixed_regulator_get_voltage(struct regulator_dev *rdev) -{ - int id = rdev_get_id(rdev); - - dev_dbg(rdev_get_dev(rdev), "%s id: %d\n", __func__, id); - - return rdev->desc->volt_table[0]; -} -EXPORT_SYMBOL_GPL(mc13xxx_fixed_regulator_get_voltage); - struct regulator_ops mc13xxx_fixed_regulator_ops = { .enable = mc13xxx_regulator_enable, .disable = mc13xxx_regulator_disable, .is_enabled = mc13xxx_regulator_is_enabled, .list_voltage = regulator_list_voltage_table, .set_voltage = mc13xxx_fixed_regulator_set_voltage, - .get_voltage = mc13xxx_fixed_regulator_get_voltage, }; EXPORT_SYMBOL_GPL(mc13xxx_fixed_regulator_ops); diff --git a/drivers/regulator/mc13xxx.h b/drivers/regulator/mc13xxx.h index eaff5510b6d..06c8903f182 100644 --- a/drivers/regulator/mc13xxx.h +++ b/drivers/regulator/mc13xxx.h @@ -34,7 +34,6 @@ struct mc13xxx_regulator_priv { extern int mc13xxx_fixed_regulator_set_voltage(struct regulator_dev *rdev, int min_uV, int max_uV, unsigned *selector); -extern int mc13xxx_fixed_regulator_get_voltage(struct regulator_dev *rdev); #ifdef CONFIG_OF extern int mc13xxx_get_num_regulators_dt(struct platform_device *pdev); diff --git a/drivers/regulator/of_regulator.c b/drivers/regulator/of_regulator.c index 3e4106f2bda..6f684916fd7 100644 --- a/drivers/regulator/of_regulator.c +++ b/drivers/regulator/of_regulator.c @@ -92,16 +92,18 @@ struct regulator_init_data *of_get_regulator_init_data(struct device *dev, EXPORT_SYMBOL_GPL(of_get_regulator_init_data); /** - * of_regulator_match - extract regulator init data when node - * property "regulator-compatible" matches with the regulator name. + * of_regulator_match - extract multiple regulator init data from device tree. * @dev: device requesting the data * @node: parent device node of the regulators * @matches: match table for the regulators * @num_matches: number of entries in match table * - * This function uses a match table specified by the regulator driver and - * looks up the corresponding init data in the device tree if - * regulator-compatible matches. Note that the match table is modified + * This function uses a match table specified by the regulator driver to + * parse regulator init data from the device tree. @node is expected to + * contain a set of child nodes, each providing the init data for one + * regulator. The data parsed from a child node will be matched to a regulator + * based on either the deprecated property regulator-compatible if present, + * or otherwise the child node's name. Note that the match table is modified * in place. * * Returns the number of matches found or a negative error code on failure. @@ -112,26 +114,23 @@ int of_regulator_match(struct device *dev, struct device_node *node, { unsigned int count = 0; unsigned int i; - const char *regulator_comp; + const char *name; struct device_node *child; if (!dev || !node) return -EINVAL; for_each_child_of_node(node, child) { - regulator_comp = of_get_property(child, + name = of_get_property(child, "regulator-compatible", NULL); - if (!regulator_comp) { - dev_err(dev, "regulator-compatible is missing for node %s\n", - child->name); - continue; - } + if (!name) + name = child->name; for (i = 0; i < num_matches; i++) { struct of_regulator_match *match = &matches[i]; if (match->of_node) continue; - if (strcmp(match->name, regulator_comp)) + if (strcmp(match->name, name)) continue; match->init_data = diff --git a/drivers/regulator/palmas-regulator.c b/drivers/regulator/palmas-regulator.c index 46c7e88f838..2ba7502fa3b 100644 --- a/drivers/regulator/palmas-regulator.c +++ b/drivers/regulator/palmas-regulator.c @@ -443,44 +443,6 @@ static int palmas_list_voltage_ldo(struct regulator_dev *dev, return 850000 + (selector * 50000); } -static int palmas_get_voltage_ldo_sel(struct regulator_dev *dev) -{ - struct palmas_pmic *pmic = rdev_get_drvdata(dev); - int id = rdev_get_id(dev); - int selector; - unsigned int reg; - unsigned int addr; - - addr = palmas_regs_info[id].vsel_addr; - - palmas_ldo_read(pmic->palmas, addr, ®); - - selector = reg & PALMAS_LDO1_VOLTAGE_VSEL_MASK; - - /* Adjust selector to match list_voltage ranges */ - if (selector > 49) - selector = 49; - - return selector; -} - -static int palmas_set_voltage_ldo_sel(struct regulator_dev *dev, - unsigned selector) -{ - struct palmas_pmic *pmic = rdev_get_drvdata(dev); - int id = rdev_get_id(dev); - unsigned int reg = 0; - unsigned int addr; - - addr = palmas_regs_info[id].vsel_addr; - - reg = selector; - - palmas_ldo_write(pmic->palmas, addr, reg); - - return 0; -} - static int palmas_map_voltage_ldo(struct regulator_dev *rdev, int min_uV, int max_uV) { @@ -505,8 +467,8 @@ static struct regulator_ops palmas_ops_ldo = { .is_enabled = palmas_is_enabled_ldo, .enable = regulator_enable_regmap, .disable = regulator_disable_regmap, - .get_voltage_sel = palmas_get_voltage_ldo_sel, - .set_voltage_sel = palmas_set_voltage_ldo_sel, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, .list_voltage = palmas_list_voltage_ldo, .map_voltage = palmas_map_voltage_ldo, }; @@ -757,6 +719,9 @@ static __devinit int palmas_probe(struct platform_device *pdev) pmic->desc[id].type = REGULATOR_VOLTAGE; pmic->desc[id].owner = THIS_MODULE; + pmic->desc[id].vsel_reg = PALMAS_BASE_TO_REG(PALMAS_LDO_BASE, + palmas_regs_info[id].vsel_addr); + pmic->desc[id].vsel_mask = PALMAS_LDO1_VOLTAGE_VSEL_MASK; pmic->desc[id].enable_reg = PALMAS_BASE_TO_REG(PALMAS_LDO_BASE, palmas_regs_info[id].ctrl_addr); pmic->desc[id].enable_mask = PALMAS_LDO1_CTRL_MODE_ACTIVE; diff --git a/drivers/regulator/s2mps11.c b/drivers/regulator/s2mps11.c index 4669dc9ac74..926f9c8f2fa 100644 --- a/drivers/regulator/s2mps11.c +++ b/drivers/regulator/s2mps11.c @@ -24,7 +24,7 @@ #include <linux/mfd/samsung/s2mps11.h> struct s2mps11_info { - struct regulator_dev **rdev; + struct regulator_dev *rdev[S2MPS11_REGULATOR_MAX]; int ramp_delay2; int ramp_delay34; @@ -236,9 +236,8 @@ static __devinit int s2mps11_pmic_probe(struct platform_device *pdev) struct sec_pmic_dev *iodev = dev_get_drvdata(pdev->dev.parent); struct sec_platform_data *pdata = dev_get_platdata(iodev->dev); struct regulator_config config = { }; - struct regulator_dev **rdev; struct s2mps11_info *s2mps11; - int i, ret, size; + int i, ret; unsigned char ramp_enable, ramp_reg = 0; if (!pdata) { @@ -251,13 +250,6 @@ static __devinit int s2mps11_pmic_probe(struct platform_device *pdev) if (!s2mps11) return -ENOMEM; - size = sizeof(struct regulator_dev *) * S2MPS11_REGULATOR_MAX; - s2mps11->rdev = devm_kzalloc(&pdev->dev, size, GFP_KERNEL); - if (!s2mps11->rdev) { - return -ENOMEM; - } - - rdev = s2mps11->rdev; platform_set_drvdata(pdev, s2mps11); s2mps11->ramp_delay2 = pdata->buck2_ramp_delay; @@ -297,12 +289,12 @@ static __devinit int s2mps11_pmic_probe(struct platform_device *pdev) config.init_data = pdata->regulators[i].initdata; config.driver_data = s2mps11; - rdev[i] = regulator_register(®ulators[i], &config); - if (IS_ERR(rdev[i])) { - ret = PTR_ERR(rdev[i]); + s2mps11->rdev[i] = regulator_register(®ulators[i], &config); + if (IS_ERR(s2mps11->rdev[i])) { + ret = PTR_ERR(s2mps11->rdev[i]); dev_err(&pdev->dev, "regulator init failed for %d\n", i); - rdev[i] = NULL; + s2mps11->rdev[i] = NULL; goto err; } } @@ -310,8 +302,7 @@ static __devinit int s2mps11_pmic_probe(struct platform_device *pdev) return 0; err: for (i = 0; i < S2MPS11_REGULATOR_MAX; i++) - if (rdev[i]) - regulator_unregister(rdev[i]); + regulator_unregister(s2mps11->rdev[i]); return ret; } @@ -319,12 +310,10 @@ err: static int __devexit s2mps11_pmic_remove(struct platform_device *pdev) { struct s2mps11_info *s2mps11 = platform_get_drvdata(pdev); - struct regulator_dev **rdev = s2mps11->rdev; int i; for (i = 0; i < S2MPS11_REGULATOR_MAX; i++) - if (rdev[i]) - regulator_unregister(rdev[i]); + regulator_unregister(s2mps11->rdev[i]); return 0; } diff --git a/drivers/regulator/tps6524x-regulator.c b/drivers/regulator/tps6524x-regulator.c index 947ece933d9..058d2f2675e 100644 --- a/drivers/regulator/tps6524x-regulator.c +++ b/drivers/regulator/tps6524x-regulator.c @@ -502,15 +502,13 @@ static int set_current_limit(struct regulator_dev *rdev, int min_uA, if (info->n_ilimsels == 1) return -EINVAL; - for (i = 0; i < info->n_ilimsels; i++) + for (i = info->n_ilimsels - 1; i >= 0; i--) { if (min_uA <= info->ilimsels[i] && max_uA >= info->ilimsels[i]) - break; - - if (i >= info->n_ilimsels) - return -EINVAL; + return write_field(hw, &info->ilimsel, i); + } - return write_field(hw, &info->ilimsel, i); + return -EINVAL; } static int get_current_limit(struct regulator_dev *rdev) diff --git a/drivers/regulator/tps6586x-regulator.c b/drivers/regulator/tps6586x-regulator.c index 19241fc3005..ce1e7cb8d51 100644 --- a/drivers/regulator/tps6586x-regulator.c +++ b/drivers/regulator/tps6586x-regulator.c @@ -57,9 +57,6 @@ struct tps6586x_regulator { struct regulator_desc desc; - int volt_reg; - int volt_shift; - int volt_nbits; int enable_bit[2]; int enable_reg[2]; @@ -81,10 +78,10 @@ static int tps6586x_set_voltage_sel(struct regulator_dev *rdev, int ret, val, rid = rdev_get_id(rdev); uint8_t mask; - val = selector << ri->volt_shift; - mask = ((1 << ri->volt_nbits) - 1) << ri->volt_shift; + val = selector << (ffs(rdev->desc->vsel_mask) - 1); + mask = rdev->desc->vsel_mask; - ret = tps6586x_update(parent, ri->volt_reg, val, mask); + ret = tps6586x_update(parent, rdev->desc->vsel_reg, val, mask); if (ret) return ret; @@ -100,66 +97,17 @@ static int tps6586x_set_voltage_sel(struct regulator_dev *rdev, return ret; } -static int tps6586x_get_voltage_sel(struct regulator_dev *rdev) -{ - struct tps6586x_regulator *ri = rdev_get_drvdata(rdev); - struct device *parent = to_tps6586x_dev(rdev); - uint8_t val, mask; - int ret; - - ret = tps6586x_read(parent, ri->volt_reg, &val); - if (ret) - return ret; - - mask = ((1 << ri->volt_nbits) - 1) << ri->volt_shift; - val = (val & mask) >> ri->volt_shift; - - if (val >= ri->desc.n_voltages) - BUG(); - - return val; -} - -static int tps6586x_regulator_enable(struct regulator_dev *rdev) -{ - struct tps6586x_regulator *ri = rdev_get_drvdata(rdev); - struct device *parent = to_tps6586x_dev(rdev); - - return tps6586x_set_bits(parent, ri->enable_reg[0], - 1 << ri->enable_bit[0]); -} - -static int tps6586x_regulator_disable(struct regulator_dev *rdev) -{ - struct tps6586x_regulator *ri = rdev_get_drvdata(rdev); - struct device *parent = to_tps6586x_dev(rdev); - - return tps6586x_clr_bits(parent, ri->enable_reg[0], - 1 << ri->enable_bit[0]); -} - -static int tps6586x_regulator_is_enabled(struct regulator_dev *rdev) -{ - struct tps6586x_regulator *ri = rdev_get_drvdata(rdev); - struct device *parent = to_tps6586x_dev(rdev); - uint8_t reg_val; - int ret; - - ret = tps6586x_read(parent, ri->enable_reg[0], ®_val); - if (ret) - return ret; - - return !!(reg_val & (1 << ri->enable_bit[0])); -} - static struct regulator_ops tps6586x_regulator_ops = { .list_voltage = regulator_list_voltage_table, - .get_voltage_sel = tps6586x_get_voltage_sel, + .get_voltage_sel = regulator_get_voltage_sel_regmap, .set_voltage_sel = tps6586x_set_voltage_sel, - .is_enabled = tps6586x_regulator_is_enabled, - .enable = tps6586x_regulator_enable, - .disable = tps6586x_regulator_disable, + .is_enabled = regulator_is_enabled_regmap, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, +}; + +static struct regulator_ops tps6586x_sys_regulator_ops = { }; static const unsigned int tps6586x_ldo0_voltages[] = { @@ -202,10 +150,11 @@ static const unsigned int tps6586x_dvm_voltages[] = { .n_voltages = ARRAY_SIZE(tps6586x_##vdata##_voltages), \ .volt_table = tps6586x_##vdata##_voltages, \ .owner = THIS_MODULE, \ + .enable_reg = TPS6586X_SUPPLY##ereg0, \ + .enable_mask = 1 << (ebit0), \ + .vsel_reg = TPS6586X_##vreg, \ + .vsel_mask = ((1 << (nbits)) - 1) << (shift), \ }, \ - .volt_reg = TPS6586X_##vreg, \ - .volt_shift = (shift), \ - .volt_nbits = (nbits), \ .enable_reg[0] = TPS6586X_SUPPLY##ereg0, \ .enable_bit[0] = (ebit0), \ .enable_reg[1] = TPS6586X_SUPPLY##ereg1, \ @@ -230,15 +179,28 @@ static const unsigned int tps6586x_dvm_voltages[] = { TPS6586X_REGULATOR_DVM_GOREG(goreg, gobit) \ } +#define TPS6586X_SYS_REGULATOR() \ +{ \ + .desc = { \ + .supply_name = "sys", \ + .name = "REG-SYS", \ + .ops = &tps6586x_sys_regulator_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = TPS6586X_ID_SYS, \ + .owner = THIS_MODULE, \ + }, \ +} + static struct tps6586x_regulator tps6586x_regulator[] = { + TPS6586X_SYS_REGULATOR(), TPS6586X_LDO(LDO_0, "vinldo01", ldo0, SUPPLYV1, 5, 3, ENC, 0, END, 0), TPS6586X_LDO(LDO_3, "vinldo23", ldo, SUPPLYV4, 0, 3, ENC, 2, END, 2), - TPS6586X_LDO(LDO_5, NULL, ldo, SUPPLYV6, 0, 3, ENE, 6, ENE, 6), + TPS6586X_LDO(LDO_5, "REG-SYS", ldo, SUPPLYV6, 0, 3, ENE, 6, ENE, 6), TPS6586X_LDO(LDO_6, "vinldo678", ldo, SUPPLYV3, 0, 3, ENC, 4, END, 4), TPS6586X_LDO(LDO_7, "vinldo678", ldo, SUPPLYV3, 3, 3, ENC, 5, END, 5), TPS6586X_LDO(LDO_8, "vinldo678", ldo, SUPPLYV2, 5, 3, ENC, 6, END, 6), TPS6586X_LDO(LDO_9, "vinldo9", ldo, SUPPLYV6, 3, 3, ENE, 7, ENE, 7), - TPS6586X_LDO(LDO_RTC, NULL, ldo, SUPPLYV4, 3, 3, V4, 7, V4, 7), + TPS6586X_LDO(LDO_RTC, "REG-SYS", ldo, SUPPLYV4, 3, 3, V4, 7, V4, 7), TPS6586X_LDO(LDO_1, "vinldo01", dvm, SUPPLYV1, 0, 5, ENC, 1, END, 1), TPS6586X_LDO(SM_2, "vin-sm2", sm2, SUPPLYV2, 0, 5, ENC, 7, END, 7), diff --git a/drivers/regulator/twl-regulator.c b/drivers/regulator/twl-regulator.c index 77a71a5c17c..7eb986a4074 100644 --- a/drivers/regulator/twl-regulator.c +++ b/drivers/regulator/twl-regulator.c @@ -10,6 +10,8 @@ */ #include <linux/module.h> +#include <linux/string.h> +#include <linux/slab.h> #include <linux/init.h> #include <linux/err.h> #include <linux/platform_device.h> @@ -624,18 +626,9 @@ static int twlfixed_list_voltage(struct regulator_dev *rdev, unsigned index) return info->min_mV * 1000; } -static int twlfixed_get_voltage(struct regulator_dev *rdev) -{ - struct twlreg_info *info = rdev_get_drvdata(rdev); - - return info->min_mV * 1000; -} - static struct regulator_ops twl4030fixed_ops = { .list_voltage = twlfixed_list_voltage, - .get_voltage = twlfixed_get_voltage, - .enable = twl4030reg_enable, .disable = twl4030reg_disable, .is_enabled = twl4030reg_is_enabled, @@ -648,8 +641,6 @@ static struct regulator_ops twl4030fixed_ops = { static struct regulator_ops twl6030fixed_ops = { .list_voltage = twlfixed_list_voltage, - .get_voltage = twlfixed_get_voltage, - .enable = twl6030reg_enable, .disable = twl6030reg_disable, .is_enabled = twl6030reg_is_enabled, @@ -659,13 +650,6 @@ static struct regulator_ops twl6030fixed_ops = { .get_status = twl6030reg_get_status, }; -static struct regulator_ops twl6030_fixed_resource = { - .enable = twl6030reg_enable, - .disable = twl6030reg_disable, - .is_enabled = twl6030reg_is_enabled, - .get_status = twl6030reg_get_status, -}; - /* * SMPS status and control */ @@ -757,37 +741,32 @@ static int twl6030smps_list_voltage(struct regulator_dev *rdev, unsigned index) return voltage; } -static int -twl6030smps_set_voltage(struct regulator_dev *rdev, int min_uV, int max_uV, - unsigned int *selector) +static int twl6030smps_map_voltage(struct regulator_dev *rdev, int min_uV, + int max_uV) { - struct twlreg_info *info = rdev_get_drvdata(rdev); - int vsel = 0; + struct twlreg_info *info = rdev_get_drvdata(rdev); + int vsel = 0; switch (info->flags) { case 0: if (min_uV == 0) vsel = 0; else if ((min_uV >= 600000) && (min_uV <= 1300000)) { - int calc_uV; vsel = DIV_ROUND_UP(min_uV - 600000, 12500); vsel++; - calc_uV = twl6030smps_list_voltage(rdev, vsel); - if (calc_uV > max_uV) - return -EINVAL; } /* Values 1..57 for vsel are linear and can be calculated * values 58..62 are non linear. */ - else if ((min_uV > 1900000) && (max_uV >= 2100000)) + else if ((min_uV > 1900000) && (min_uV <= 2100000)) vsel = 62; - else if ((min_uV > 1800000) && (max_uV >= 1900000)) + else if ((min_uV > 1800000) && (min_uV <= 1900000)) vsel = 61; - else if ((min_uV > 1500000) && (max_uV >= 1800000)) + else if ((min_uV > 1500000) && (min_uV <= 1800000)) vsel = 60; - else if ((min_uV > 1350000) && (max_uV >= 1500000)) + else if ((min_uV > 1350000) && (min_uV <= 1500000)) vsel = 59; - else if ((min_uV > 1300000) && (max_uV >= 1350000)) + else if ((min_uV > 1300000) && (min_uV <= 1350000)) vsel = 58; else return -EINVAL; @@ -796,25 +775,21 @@ twl6030smps_set_voltage(struct regulator_dev *rdev, int min_uV, int max_uV, if (min_uV == 0) vsel = 0; else if ((min_uV >= 700000) && (min_uV <= 1420000)) { - int calc_uV; vsel = DIV_ROUND_UP(min_uV - 700000, 12500); vsel++; - calc_uV = twl6030smps_list_voltage(rdev, vsel); - if (calc_uV > max_uV) - return -EINVAL; } /* Values 1..57 for vsel are linear and can be calculated * values 58..62 are non linear. */ - else if ((min_uV > 1900000) && (max_uV >= 2100000)) + else if ((min_uV > 1900000) && (min_uV <= 2100000)) vsel = 62; - else if ((min_uV > 1800000) && (max_uV >= 1900000)) + else if ((min_uV > 1800000) && (min_uV <= 1900000)) vsel = 61; - else if ((min_uV > 1350000) && (max_uV >= 1800000)) + else if ((min_uV > 1350000) && (min_uV <= 1800000)) vsel = 60; - else if ((min_uV > 1350000) && (max_uV >= 1500000)) + else if ((min_uV > 1350000) && (min_uV <= 1500000)) vsel = 59; - else if ((min_uV > 1300000) && (max_uV >= 1350000)) + else if ((min_uV > 1300000) && (min_uV <= 1350000)) vsel = 58; else return -EINVAL; @@ -830,17 +805,23 @@ twl6030smps_set_voltage(struct regulator_dev *rdev, int min_uV, int max_uV, case SMPS_OFFSET_EN|SMPS_EXTENDED_EN: if (min_uV == 0) { vsel = 0; - } else if ((min_uV >= 2161000) && (max_uV <= 4321000)) { + } else if ((min_uV >= 2161000) && (min_uV <= 4321000)) { vsel = DIV_ROUND_UP(min_uV - 2161000, 38600); vsel++; } break; } - *selector = vsel; + return vsel; +} + +static int twl6030smps_set_voltage_sel(struct regulator_dev *rdev, + unsigned int selector) +{ + struct twlreg_info *info = rdev_get_drvdata(rdev); return twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_VOLTAGE_SMPS, - vsel); + selector); } static int twl6030smps_get_voltage_sel(struct regulator_dev *rdev) @@ -852,8 +833,9 @@ static int twl6030smps_get_voltage_sel(struct regulator_dev *rdev) static struct regulator_ops twlsmps_ops = { .list_voltage = twl6030smps_list_voltage, + .map_voltage = twl6030smps_map_voltage, - .set_voltage = twl6030smps_set_voltage, + .set_voltage_sel = twl6030smps_set_voltage_sel, .get_voltage_sel = twl6030smps_get_voltage_sel, .enable = twl6030reg_enable, @@ -876,7 +858,7 @@ static struct regulator_ops twlsmps_ops = { 0x0, TWL6030, twl6030fixed_ops) #define TWL4030_ADJUSTABLE_LDO(label, offset, num, turnon_delay, remap_conf) \ -static struct twlreg_info TWL4030_INFO_##label = { \ +static const struct twlreg_info TWL4030_INFO_##label = { \ .base = offset, \ .id = num, \ .table_len = ARRAY_SIZE(label##_VSEL_table), \ @@ -894,7 +876,7 @@ static struct twlreg_info TWL4030_INFO_##label = { \ } #define TWL4030_ADJUSTABLE_SMPS(label, offset, num, turnon_delay, remap_conf) \ -static struct twlreg_info TWL4030_INFO_##label = { \ +static const struct twlreg_info TWL4030_INFO_##label = { \ .base = offset, \ .id = num, \ .remap = remap_conf, \ @@ -909,7 +891,7 @@ static struct twlreg_info TWL4030_INFO_##label = { \ } #define TWL6030_ADJUSTABLE_SMPS(label) \ -static struct twlreg_info TWL6030_INFO_##label = { \ +static const struct twlreg_info TWL6030_INFO_##label = { \ .desc = { \ .name = #label, \ .id = TWL6030_REG_##label, \ @@ -920,7 +902,7 @@ static struct twlreg_info TWL6030_INFO_##label = { \ } #define TWL6030_ADJUSTABLE_LDO(label, offset, min_mVolts, max_mVolts) \ -static struct twlreg_info TWL6030_INFO_##label = { \ +static const struct twlreg_info TWL6030_INFO_##label = { \ .base = offset, \ .min_mV = min_mVolts, \ .max_mV = max_mVolts, \ @@ -935,7 +917,7 @@ static struct twlreg_info TWL6030_INFO_##label = { \ } #define TWL6025_ADJUSTABLE_LDO(label, offset, min_mVolts, max_mVolts) \ -static struct twlreg_info TWL6025_INFO_##label = { \ +static const struct twlreg_info TWL6025_INFO_##label = { \ .base = offset, \ .min_mV = min_mVolts, \ .max_mV = max_mVolts, \ @@ -951,7 +933,7 @@ static struct twlreg_info TWL6025_INFO_##label = { \ #define TWL_FIXED_LDO(label, offset, mVolts, num, turnon_delay, remap_conf, \ family, operations) \ -static struct twlreg_info TWLFIXED_INFO_##label = { \ +static const struct twlreg_info TWLFIXED_INFO_##label = { \ .base = offset, \ .id = num, \ .min_mV = mVolts, \ @@ -981,7 +963,7 @@ static struct twlreg_info TWLRES_INFO_##label = { \ } #define TWL6025_ADJUSTABLE_SMPS(label, offset) \ -static struct twlreg_info TWLSMPS_INFO_##label = { \ +static const struct twlreg_info TWLSMPS_INFO_##label = { \ .base = offset, \ .min_mV = 600, \ .max_mV = 2100, \ @@ -1138,6 +1120,7 @@ static int __devinit twlreg_probe(struct platform_device *pdev) { int i, id; struct twlreg_info *info; + const struct twlreg_info *template; struct regulator_init_data *initdata; struct regulation_constraints *c; struct regulator_dev *rdev; @@ -1147,17 +1130,17 @@ static int __devinit twlreg_probe(struct platform_device *pdev) match = of_match_device(twl_of_match, &pdev->dev); if (match) { - info = match->data; - id = info->desc.id; + template = match->data; + id = template->desc.id; initdata = of_get_regulator_init_data(&pdev->dev, pdev->dev.of_node); drvdata = NULL; } else { id = pdev->id; initdata = pdev->dev.platform_data; - for (i = 0, info = NULL; i < ARRAY_SIZE(twl_of_match); i++) { - info = twl_of_match[i].data; - if (info && info->desc.id == id) + for (i = 0, template = NULL; i < ARRAY_SIZE(twl_of_match); i++) { + template = twl_of_match[i].data; + if (template && template->desc.id == id) break; } if (i == ARRAY_SIZE(twl_of_match)) @@ -1168,12 +1151,16 @@ static int __devinit twlreg_probe(struct platform_device *pdev) return -EINVAL; } - if (!info) + if (!template) return -ENODEV; if (!initdata) return -EINVAL; + info = kmemdup(template, sizeof (*info), GFP_KERNEL); + if (!info) + return -ENOMEM; + if (drvdata) { /* copy the driver data into regulator data */ info->features = drvdata->features; @@ -1234,6 +1221,7 @@ static int __devinit twlreg_probe(struct platform_device *pdev) if (IS_ERR(rdev)) { dev_err(&pdev->dev, "can't register %s, %ld\n", info->desc.name, PTR_ERR(rdev)); + kfree(info); return PTR_ERR(rdev); } platform_set_drvdata(pdev, rdev); @@ -1255,7 +1243,11 @@ static int __devinit twlreg_probe(struct platform_device *pdev) static int __devexit twlreg_remove(struct platform_device *pdev) { - regulator_unregister(platform_get_drvdata(pdev)); + struct regulator_dev *rdev = platform_get_drvdata(pdev); + struct twlreg_info *info = rdev->reg_data; + + regulator_unregister(rdev); + kfree(info); return 0; } diff --git a/drivers/regulator/wm831x-dcdc.c b/drivers/regulator/wm831x-dcdc.c index 7413885be01..90cbcc68370 100644 --- a/drivers/regulator/wm831x-dcdc.c +++ b/drivers/regulator/wm831x-dcdc.c @@ -339,16 +339,15 @@ static int wm831x_buckv_set_current_limit(struct regulator_dev *rdev, u16 reg = dcdc->base + WM831X_DCDC_CONTROL_2; int i; - for (i = 0; i < ARRAY_SIZE(wm831x_dcdc_ilim); i++) { + for (i = ARRAY_SIZE(wm831x_dcdc_ilim) - 1; i >= 0; i--) { if ((min_uA <= wm831x_dcdc_ilim[i]) && (wm831x_dcdc_ilim[i] <= max_uA)) - break; + return wm831x_set_bits(wm831x, reg, + WM831X_DC1_HC_THR_MASK, + i << WM831X_DC1_HC_THR_SHIFT); } - if (i == ARRAY_SIZE(wm831x_dcdc_ilim)) - return -EINVAL; - return wm831x_set_bits(wm831x, reg, WM831X_DC1_HC_THR_MASK, - i << WM831X_DC1_HC_THR_SHIFT); + return -EINVAL; } static int wm831x_buckv_get_current_limit(struct regulator_dev *rdev) diff --git a/drivers/regulator/wm831x-ldo.c b/drivers/regulator/wm831x-ldo.c index 5cb70ca1e98..9af512672be 100644 --- a/drivers/regulator/wm831x-ldo.c +++ b/drivers/regulator/wm831x-ldo.c @@ -205,6 +205,8 @@ static int wm831x_gp_ldo_get_status(struct regulator_dev *rdev) /* Is it reporting under voltage? */ ret = wm831x_reg_read(wm831x, WM831X_LDO_UV_STATUS); + if (ret < 0) + return ret; if (ret & mask) return REGULATOR_STATUS_ERROR; @@ -237,6 +239,8 @@ static struct regulator_ops wm831x_gp_ldo_ops = { .set_mode = wm831x_gp_ldo_set_mode, .get_status = wm831x_gp_ldo_get_status, .get_optimum_mode = wm831x_gp_ldo_get_optimum_mode, + .get_bypass = regulator_get_bypass_regmap, + .set_bypass = regulator_set_bypass_regmap, .is_enabled = regulator_is_enabled_regmap, .enable = regulator_enable_regmap, @@ -293,6 +297,8 @@ static __devinit int wm831x_gp_ldo_probe(struct platform_device *pdev) ldo->desc.vsel_mask = WM831X_LDO1_ON_VSEL_MASK; ldo->desc.enable_reg = WM831X_LDO_ENABLE; ldo->desc.enable_mask = 1 << id; + ldo->desc.bypass_reg = ldo->base; + ldo->desc.bypass_mask = WM831X_LDO1_SWI; config.dev = pdev->dev.parent; if (pdata) @@ -469,6 +475,8 @@ static int wm831x_aldo_get_status(struct regulator_dev *rdev) /* Is it reporting under voltage? */ ret = wm831x_reg_read(wm831x, WM831X_LDO_UV_STATUS); + if (ret < 0) + return ret; if (ret & mask) return REGULATOR_STATUS_ERROR; @@ -488,6 +496,8 @@ static struct regulator_ops wm831x_aldo_ops = { .get_mode = wm831x_aldo_get_mode, .set_mode = wm831x_aldo_set_mode, .get_status = wm831x_aldo_get_status, + .set_bypass = regulator_set_bypass_regmap, + .get_bypass = regulator_get_bypass_regmap, .is_enabled = regulator_is_enabled_regmap, .enable = regulator_enable_regmap, @@ -544,6 +554,8 @@ static __devinit int wm831x_aldo_probe(struct platform_device *pdev) ldo->desc.vsel_mask = WM831X_LDO7_ON_VSEL_MASK; ldo->desc.enable_reg = WM831X_LDO_ENABLE; ldo->desc.enable_mask = 1 << id; + ldo->desc.bypass_reg = ldo->base; + ldo->desc.bypass_mask = WM831X_LDO7_SWI; config.dev = pdev->dev.parent; if (pdata) diff --git a/drivers/regulator/wm8400-regulator.c b/drivers/regulator/wm8400-regulator.c index 9035dd05361..27c746ef063 100644 --- a/drivers/regulator/wm8400-regulator.c +++ b/drivers/regulator/wm8400-regulator.c @@ -120,13 +120,8 @@ static int wm8400_dcdc_set_mode(struct regulator_dev *dev, unsigned int mode) case REGULATOR_MODE_IDLE: /* Datasheet: standby */ - ret = wm8400_set_bits(wm8400, WM8400_DCDC1_CONTROL_1 + offset, - WM8400_DC1_ACTIVE, 0); - if (ret != 0) - return ret; return wm8400_set_bits(wm8400, WM8400_DCDC1_CONTROL_1 + offset, - WM8400_DC1_SLEEP, 0); - + WM8400_DC1_ACTIVE | WM8400_DC1_SLEEP, 0); default: return -EINVAL; } diff --git a/drivers/scsi/aic7xxx/aic79xx_core.c b/drivers/scsi/aic7xxx/aic79xx_core.c index 25417d0e7ac..0bcacf71aef 100644 --- a/drivers/scsi/aic7xxx/aic79xx_core.c +++ b/drivers/scsi/aic7xxx/aic79xx_core.c @@ -2888,7 +2888,7 @@ ahd_handle_lqiphase_error(struct ahd_softc *ahd, u_int lqistat1) ahd_outb(ahd, CLRINT, CLRSCSIINT); ahd_unpause(ahd); } else { - printk("Reseting Channel for LQI Phase error\n"); + printk("Resetting Channel for LQI Phase error\n"); ahd_dump_card_state(ahd); ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE); } diff --git a/drivers/scsi/bfa/bfa_ioc.c b/drivers/scsi/bfa/bfa_ioc.c index 8cdb79c2fcd..21ad2902e5c 100644 --- a/drivers/scsi/bfa/bfa_ioc.c +++ b/drivers/scsi/bfa/bfa_ioc.c @@ -5587,7 +5587,7 @@ static bfa_status_t bfa_dconf_flash_write(struct bfa_dconf_mod_s *dconf); static void bfa_dconf_init_cb(void *arg, bfa_status_t status); /* - * Begining state of dconf module. Waiting for an event to start. + * Beginning state of dconf module. Waiting for an event to start. */ static void bfa_dconf_sm_uninit(struct bfa_dconf_mod_s *dconf, enum bfa_dconf_event event) diff --git a/drivers/scsi/bfa/bfa_ioc.h b/drivers/scsi/bfa/bfa_ioc.h index 1a99d4b5b50..7b916e04ca5 100644 --- a/drivers/scsi/bfa/bfa_ioc.h +++ b/drivers/scsi/bfa/bfa_ioc.h @@ -530,7 +530,7 @@ struct bfa_diag_results_fwping { struct bfa_diag_qtest_result_s { u32 status; - u16 count; /* sucessful queue test count */ + u16 count; /* successful queue test count */ u8 queue; u8 rsvd; /* 64-bit align */ }; diff --git a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c index ae1cb7639d9..e0558656c64 100644 --- a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c +++ b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c @@ -908,7 +908,7 @@ static void bnx2fc_indicate_netevent(void *context, unsigned long event, return; default: - printk(KERN_ERR PFX "Unkonwn netevent %ld", event); + printk(KERN_ERR PFX "Unknown netevent %ld", event); return; } @@ -1738,7 +1738,7 @@ static int bnx2fc_ulp_get_stats(void *handle) /** * bnx2fc_ulp_start - cnic callback to initialize & start adapter instance * - * @handle: transport handle pointing to adapter struture + * @handle: transport handle pointing to adapter structure * * This function maps adapter structure to pcidev structure and initiates * firmware handshake to enable/initialize on-chip FCoE components. diff --git a/drivers/scsi/gdth.h b/drivers/scsi/gdth.h index d3e4d7c6f57..fbf6f0f4b0d 100644 --- a/drivers/scsi/gdth.h +++ b/drivers/scsi/gdth.h @@ -49,15 +49,6 @@ /* GDT_ISA */ #define GDT2_ID 0x0120941c /* GDT2000/2020 */ -/* vendor ID, device IDs (PCI) */ -/* these defines should already exist in <linux/pci.h> */ -#ifndef PCI_VENDOR_ID_VORTEX -#define PCI_VENDOR_ID_VORTEX 0x1119 /* PCI controller vendor ID */ -#endif -#ifndef PCI_VENDOR_ID_INTEL -#define PCI_VENDOR_ID_INTEL 0x8086 -#endif - #ifndef PCI_DEVICE_ID_VORTEX_GDT60x0 /* GDT_PCI */ #define PCI_DEVICE_ID_VORTEX_GDT60x0 0 /* GDT6000/6020/6050 */ diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c index 467dc38246f..1059c99690e 100644 --- a/drivers/scsi/ipr.c +++ b/drivers/scsi/ipr.c @@ -192,7 +192,7 @@ static const struct ipr_chip_t ipr_chip[] = { { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CROCODILE, IPR_USE_MSI, IPR_SIS64, IPR_MMIO, &ipr_chip_cfg[2] } }; -static int ipr_max_bus_speeds [] = { +static int ipr_max_bus_speeds[] = { IPR_80MBs_SCSI_RATE, IPR_U160_SCSI_RATE, IPR_U320_SCSI_RATE }; @@ -562,7 +562,7 @@ static void ipr_trc_hook(struct ipr_cmnd *ipr_cmd, trace_entry->u.add_data = add_data; } #else -#define ipr_trc_hook(ipr_cmd, type, add_data) do { } while(0) +#define ipr_trc_hook(ipr_cmd, type, add_data) do { } while (0) #endif /** @@ -1002,7 +1002,7 @@ static void ipr_send_hcam(struct ipr_ioa_cfg *ioa_cfg, u8 type, **/ static void ipr_update_ata_class(struct ipr_resource_entry *res, unsigned int proto) { - switch(proto) { + switch (proto) { case IPR_PROTO_SATA: case IPR_PROTO_SAS_STP: res->ata_class = ATA_DEV_ATA; @@ -3043,7 +3043,7 @@ static void ipr_get_ioa_dump(struct ipr_ioa_cfg *ioa_cfg, struct ipr_dump *dump) } #else -#define ipr_get_ioa_dump(ioa_cfg, dump) do { } while(0) +#define ipr_get_ioa_dump(ioa_cfg, dump) do { } while (0) #endif /** @@ -3055,7 +3055,7 @@ static void ipr_get_ioa_dump(struct ipr_ioa_cfg *ioa_cfg, struct ipr_dump *dump) **/ static void ipr_release_dump(struct kref *kref) { - struct ipr_dump *dump = container_of(kref,struct ipr_dump,kref); + struct ipr_dump *dump = container_of(kref, struct ipr_dump, kref); struct ipr_ioa_cfg *ioa_cfg = dump->ioa_cfg; unsigned long lock_flags = 0; int i; @@ -3142,7 +3142,7 @@ restart: break; } } - } while(did_work); + } while (did_work); list_for_each_entry(res, &ioa_cfg->used_res_q, queue) { if (res->add_to_ml) { @@ -3268,7 +3268,7 @@ static ssize_t ipr_show_log_level(struct device *dev, * number of bytes printed to buffer **/ static ssize_t ipr_store_log_level(struct device *dev, - struct device_attribute *attr, + struct device_attribute *attr, const char *buf, size_t count) { struct Scsi_Host *shost = class_to_shost(dev); @@ -3315,7 +3315,7 @@ static ssize_t ipr_store_diagnostics(struct device *dev, return -EACCES; spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); - while(ioa_cfg->in_reset_reload) { + while (ioa_cfg->in_reset_reload) { spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload); spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); @@ -3682,7 +3682,7 @@ static int ipr_update_ioa_ucode(struct ipr_ioa_cfg *ioa_cfg, unsigned long lock_flags; spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); - while(ioa_cfg->in_reset_reload) { + while (ioa_cfg->in_reset_reload) { spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload); spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); @@ -3746,7 +3746,7 @@ static ssize_t ipr_store_update_fw(struct device *dev, len = snprintf(fname, 99, "%s", buf); fname[len-1] = '\0'; - if(request_firmware(&fw_entry, fname, &ioa_cfg->pdev->dev)) { + if (request_firmware(&fw_entry, fname, &ioa_cfg->pdev->dev)) { dev_err(&ioa_cfg->pdev->dev, "Firmware file %s not found\n", fname); return -EIO; } @@ -4612,7 +4612,7 @@ static int ipr_slave_alloc(struct scsi_device *sdev) * Return value: * SUCCESS / FAILED **/ -static int __ipr_eh_host_reset(struct scsi_cmnd * scsi_cmd) +static int __ipr_eh_host_reset(struct scsi_cmnd *scsi_cmd) { struct ipr_ioa_cfg *ioa_cfg; int rc; @@ -4634,7 +4634,7 @@ static int __ipr_eh_host_reset(struct scsi_cmnd * scsi_cmd) return rc; } -static int ipr_eh_host_reset(struct scsi_cmnd * cmd) +static int ipr_eh_host_reset(struct scsi_cmnd *cmd) { int rc; @@ -4701,7 +4701,7 @@ static int ipr_device_reset(struct ipr_ioa_cfg *ioa_cfg, } LEAVE; - return (IPR_IOASC_SENSE_KEY(ioasc) ? -EIO : 0); + return IPR_IOASC_SENSE_KEY(ioasc) ? -EIO : 0; } /** @@ -4725,7 +4725,7 @@ static int ipr_sata_reset(struct ata_link *link, unsigned int *classes, ENTER; spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); - while(ioa_cfg->in_reset_reload) { + while (ioa_cfg->in_reset_reload) { spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload); spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); @@ -4753,7 +4753,7 @@ static int ipr_sata_reset(struct ata_link *link, unsigned int *classes, * Return value: * SUCCESS / FAILED **/ -static int __ipr_eh_dev_reset(struct scsi_cmnd * scsi_cmd) +static int __ipr_eh_dev_reset(struct scsi_cmnd *scsi_cmd) { struct ipr_cmnd *ipr_cmd; struct ipr_ioa_cfg *ioa_cfg; @@ -4811,10 +4811,10 @@ static int __ipr_eh_dev_reset(struct scsi_cmnd * scsi_cmd) res->resetting_device = 0; LEAVE; - return (rc ? FAILED : SUCCESS); + return rc ? FAILED : SUCCESS; } -static int ipr_eh_dev_reset(struct scsi_cmnd * cmd) +static int ipr_eh_dev_reset(struct scsi_cmnd *cmd) { int rc; @@ -4910,7 +4910,7 @@ static void ipr_abort_timeout(struct ipr_cmnd *ipr_cmd) * Return value: * SUCCESS / FAILED **/ -static int ipr_cancel_op(struct scsi_cmnd * scsi_cmd) +static int ipr_cancel_op(struct scsi_cmnd *scsi_cmd) { struct ipr_cmnd *ipr_cmd; struct ipr_ioa_cfg *ioa_cfg; @@ -4979,7 +4979,7 @@ static int ipr_cancel_op(struct scsi_cmnd * scsi_cmd) res->needs_sync_complete = 1; LEAVE; - return (IPR_IOASC_SENSE_KEY(ioasc) ? FAILED : SUCCESS); + return IPR_IOASC_SENSE_KEY(ioasc) ? FAILED : SUCCESS; } /** @@ -4989,7 +4989,7 @@ static int ipr_cancel_op(struct scsi_cmnd * scsi_cmd) * Return value: * SUCCESS / FAILED **/ -static int ipr_eh_abort(struct scsi_cmnd * scsi_cmd) +static int ipr_eh_abort(struct scsi_cmnd *scsi_cmd) { unsigned long flags; int rc; @@ -5907,7 +5907,7 @@ static int ipr_ioctl(struct scsi_device *sdev, int cmd, void __user *arg) * Return value: * pointer to buffer with description string **/ -static const char * ipr_ioa_info(struct Scsi_Host *host) +static const char *ipr_ioa_info(struct Scsi_Host *host) { static char buffer[512]; struct ipr_ioa_cfg *ioa_cfg; @@ -5965,7 +5965,7 @@ static void ipr_ata_phy_reset(struct ata_port *ap) ENTER; spin_lock_irqsave(ioa_cfg->host->host_lock, flags); - while(ioa_cfg->in_reset_reload) { + while (ioa_cfg->in_reset_reload) { spin_unlock_irqrestore(ioa_cfg->host->host_lock, flags); wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload); spin_lock_irqsave(ioa_cfg->host->host_lock, flags); @@ -6005,7 +6005,7 @@ static void ipr_ata_post_internal(struct ata_queued_cmd *qc) unsigned long flags; spin_lock_irqsave(ioa_cfg->host->host_lock, flags); - while(ioa_cfg->in_reset_reload) { + while (ioa_cfg->in_reset_reload) { spin_unlock_irqrestore(ioa_cfg->host->host_lock, flags); wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload); spin_lock_irqsave(ioa_cfg->host->host_lock, flags); @@ -6330,7 +6330,7 @@ static int ipr_invalid_adapter(struct ipr_ioa_cfg *ioa_cfg) int i; if ((ioa_cfg->type == 0x5702) && (ioa_cfg->pdev->revision < 4)) { - for (i = 0; i < ARRAY_SIZE(ipr_blocked_processors); i++){ + for (i = 0; i < ARRAY_SIZE(ipr_blocked_processors); i++) { if (__is_processor(ipr_blocked_processors[i])) return 1; } @@ -6608,7 +6608,7 @@ static void ipr_scsi_bus_speed_limit(struct ipr_ioa_cfg *ioa_cfg) * none **/ static void ipr_modify_ioafp_mode_page_28(struct ipr_ioa_cfg *ioa_cfg, - struct ipr_mode_pages *mode_pages) + struct ipr_mode_pages *mode_pages) { int i, entry_length; struct ipr_dev_bus_entry *bus; @@ -8022,7 +8022,7 @@ static void ipr_reset_ioa_job(struct ipr_cmnd *ipr_cmd) ipr_reinit_ipr_cmnd(ipr_cmd); ipr_cmd->job_step_failed = ipr_reset_cmd_failed; rc = ipr_cmd->job_step(ipr_cmd); - } while(rc == IPR_RC_JOB_CONTINUE); + } while (rc == IPR_RC_JOB_CONTINUE); } /** @@ -8283,7 +8283,7 @@ static void ipr_free_cmd_blks(struct ipr_ioa_cfg *ioa_cfg) } if (ioa_cfg->ipr_cmd_pool) - pci_pool_destroy (ioa_cfg->ipr_cmd_pool); + pci_pool_destroy(ioa_cfg->ipr_cmd_pool); kfree(ioa_cfg->ipr_cmnd_list); kfree(ioa_cfg->ipr_cmnd_list_dma); @@ -8363,8 +8363,8 @@ static int __devinit ipr_alloc_cmd_blks(struct ipr_ioa_cfg *ioa_cfg) dma_addr_t dma_addr; int i; - ioa_cfg->ipr_cmd_pool = pci_pool_create (IPR_NAME, ioa_cfg->pdev, - sizeof(struct ipr_cmnd), 512, 0); + ioa_cfg->ipr_cmd_pool = pci_pool_create(IPR_NAME, ioa_cfg->pdev, + sizeof(struct ipr_cmnd), 512, 0); if (!ioa_cfg->ipr_cmd_pool) return -ENOMEM; @@ -8378,7 +8378,7 @@ static int __devinit ipr_alloc_cmd_blks(struct ipr_ioa_cfg *ioa_cfg) } for (i = 0; i < IPR_NUM_CMD_BLKS; i++) { - ipr_cmd = pci_pool_alloc (ioa_cfg->ipr_cmd_pool, GFP_KERNEL, &dma_addr); + ipr_cmd = pci_pool_alloc(ioa_cfg->ipr_cmd_pool, GFP_KERNEL, &dma_addr); if (!ipr_cmd) { ipr_free_cmd_blks(ioa_cfg); @@ -8964,7 +8964,7 @@ static void ipr_scan_vsets(struct ipr_ioa_cfg *ioa_cfg) int target, lun; for (target = 0; target < IPR_MAX_NUM_TARGETS_PER_BUS; target++) - for (lun = 0; lun < IPR_MAX_NUM_VSET_LUNS_PER_TARGET; lun++ ) + for (lun = 0; lun < IPR_MAX_NUM_VSET_LUNS_PER_TARGET; lun++) scsi_add_device(ioa_cfg->host, IPR_VSET_BUS, target, lun); } @@ -9010,7 +9010,7 @@ static void __ipr_remove(struct pci_dev *pdev) ENTER; spin_lock_irqsave(ioa_cfg->host->host_lock, host_lock_flags); - while(ioa_cfg->in_reset_reload) { + while (ioa_cfg->in_reset_reload) { spin_unlock_irqrestore(ioa_cfg->host->host_lock, host_lock_flags); wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload); spin_lock_irqsave(ioa_cfg->host->host_lock, host_lock_flags); @@ -9139,7 +9139,7 @@ static void ipr_shutdown(struct pci_dev *pdev) unsigned long lock_flags = 0; spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); - while(ioa_cfg->in_reset_reload) { + while (ioa_cfg->in_reset_reload) { spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload); spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c index 45385f53164..b334fdc1726 100644 --- a/drivers/scsi/isci/host.c +++ b/drivers/scsi/isci/host.c @@ -492,7 +492,7 @@ static void sci_controller_process_completions(struct isci_host *ihost) u32 event_cycle; dev_dbg(&ihost->pdev->dev, - "%s: completion queue begining get:0x%08x\n", + "%s: completion queue beginning get:0x%08x\n", __func__, ihost->completion_queue_get); diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c index 92c1d86d1fc..9be45a2b223 100644 --- a/drivers/scsi/isci/init.c +++ b/drivers/scsi/isci/init.c @@ -222,7 +222,7 @@ static struct sas_domain_function_template isci_transport_ops = { * @isci_host: This parameter specifies the lldd specific wrapper for the * libsas sas_ha struct. * - * This method returns an error code indicating sucess or failure. The user + * This method returns an error code indicating success or failure. The user * should check for possible memory allocation error return otherwise, a zero * indicates success. */ diff --git a/drivers/scsi/isci/port.c b/drivers/scsi/isci/port.c index 2fb85bf7544..13098b09a82 100644 --- a/drivers/scsi/isci/port.c +++ b/drivers/scsi/isci/port.c @@ -212,7 +212,7 @@ static void isci_port_link_up(struct isci_host *isci_host, memcpy(iphy->sas_phy.attached_sas_addr, iphy->frame_rcvd.iaf.sas_addr, SAS_ADDR_SIZE); } else { - dev_err(&isci_host->pdev->dev, "%s: unkown target\n", __func__); + dev_err(&isci_host->pdev->dev, "%s: unknown target\n", __func__); success = false; } diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c index 7a0431c7349..c1bafc3f3fb 100644 --- a/drivers/scsi/isci/request.c +++ b/drivers/scsi/isci/request.c @@ -2240,7 +2240,7 @@ static enum sci_status atapi_data_tc_completion_handler(struct isci_request *ire status = ireq->sci_status; sci_change_state(&idev->sm, SCI_STP_DEV_ATAPI_ERROR); } else { - /* If receiving any non-sucess TC status, no UF + /* If receiving any non-success TC status, no UF * received yet, then an UF for the status fis * is coming after (XXX: suspect this is * actually a protocol error or a bug like the diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c index 6bc74eb012c..b6f19a1db78 100644 --- a/drivers/scsi/isci/task.c +++ b/drivers/scsi/isci/task.c @@ -532,7 +532,7 @@ int isci_task_abort_task(struct sas_task *task) /* The request has already completed and there * is nothing to do here other than to set the task * done bit, and indicate that the task abort function - * was sucessful. + * was successful. */ spin_lock_irqsave(&task->task_state_lock, flags); task->task_state_flags |= SAS_TASK_STATE_DONE; diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index 45c15208be9..29937b606c8 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -6607,7 +6607,7 @@ out_error: * we just use some constant number as place holder. * * Return codes - * 0 - sucessful + * 0 - successful * -ENOMEM - No availble memory * -EIO - The mailbox failed to complete successfully. **/ diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index 9cbd20b1328..0e7e144507b 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -4739,7 +4739,7 @@ lpfc_sli4_read_rev(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq, * is attached to. * * Return codes - * 0 - sucessful + * 0 - successful * otherwise - failed to retrieve physical port name **/ static int @@ -15209,7 +15209,7 @@ lpfc_check_next_fcf_pri_level(struct lpfc_hba *phba) /* * if next_fcf_pri was not set above and the list is not empty then * we have failed flogis on all of them. So reset flogi failed - * and start at the begining. + * and start at the beginning. */ if (!next_fcf_pri && !list_empty(&phba->fcf.fcf_pri_list)) { list_for_each_entry(fcf_pri, &phba->fcf.fcf_pri_list, list) { diff --git a/drivers/scsi/megaraid.c b/drivers/scsi/megaraid.c index 97825f11695..76ad72d32c3 100644 --- a/drivers/scsi/megaraid.c +++ b/drivers/scsi/megaraid.c @@ -305,12 +305,11 @@ mega_query_adapter(adapter_t *adapter) adapter->host->sg_tablesize = adapter->sglen; - /* use HP firmware and bios version encoding Note: fw_version[0|1] and bios_version[0|1] were originally shifted right 8 bits making them zero. This 0 value was hardcoded to fix sparse warnings. */ - if (adapter->product_info.subsysvid == HP_SUBSYS_VID) { + if (adapter->product_info.subsysvid == PCI_VENDOR_ID_HP) { sprintf (adapter->fw_version, "%c%d%d.%d%d", adapter->product_info.fw_version[2], 0, @@ -4716,7 +4715,7 @@ megaraid_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) * support, since this firmware cannot handle 64 bit * addressing */ - if ((subsysvid == HP_SUBSYS_VID) && + if ((subsysvid == PCI_VENDOR_ID_HP) && ((subsysid == 0x60E7) || (subsysid == 0x60E8))) { /* * which firmware diff --git a/drivers/scsi/megaraid.h b/drivers/scsi/megaraid.h index 9a7897f8ca4..4fb2adf6b80 100644 --- a/drivers/scsi/megaraid.h +++ b/drivers/scsi/megaraid.h @@ -45,45 +45,10 @@ #define MAX_DEV_TYPE 32 -#ifndef PCI_VENDOR_ID_LSI_LOGIC -#define PCI_VENDOR_ID_LSI_LOGIC 0x1000 -#endif - -#ifndef PCI_VENDOR_ID_AMI -#define PCI_VENDOR_ID_AMI 0x101E -#endif - -#ifndef PCI_VENDOR_ID_DELL -#define PCI_VENDOR_ID_DELL 0x1028 -#endif - -#ifndef PCI_VENDOR_ID_INTEL -#define PCI_VENDOR_ID_INTEL 0x8086 -#endif - -#ifndef PCI_DEVICE_ID_AMI_MEGARAID -#define PCI_DEVICE_ID_AMI_MEGARAID 0x9010 -#endif - -#ifndef PCI_DEVICE_ID_AMI_MEGARAID2 -#define PCI_DEVICE_ID_AMI_MEGARAID2 0x9060 -#endif - -#ifndef PCI_DEVICE_ID_AMI_MEGARAID3 -#define PCI_DEVICE_ID_AMI_MEGARAID3 0x1960 -#endif - #define PCI_DEVICE_ID_DISCOVERY 0x000E #define PCI_DEVICE_ID_PERC4_DI 0x000F #define PCI_DEVICE_ID_PERC4_QC_VERDE 0x0407 -/* Sub-System Vendor IDs */ -#define AMI_SUBSYS_VID 0x101E -#define DELL_SUBSYS_VID 0x1028 -#define HP_SUBSYS_VID 0x103C -#define LSI_SUBSYS_VID 0x1000 -#define INTEL_SUBSYS_VID 0x8086 - #define HBA_SIGNATURE 0x3344 #define HBA_SIGNATURE_471 0xCCCC #define HBA_SIGNATURE_64BIT 0x0299 diff --git a/drivers/scsi/mvumi.c b/drivers/scsi/mvumi.c index 88cf1db21a7..783edc7c6b9 100644 --- a/drivers/scsi/mvumi.c +++ b/drivers/scsi/mvumi.c @@ -122,7 +122,7 @@ static struct mvumi_res *mvumi_alloc_mem_resource(struct mvumi_hba *mhba, if (!res) { dev_err(&mhba->pdev->dev, - "Failed to allocate memory for resouce manager.\n"); + "Failed to allocate memory for resource manager.\n"); return NULL; } @@ -1007,13 +1007,13 @@ static int mvumi_handshake(struct mvumi_hba *mhba) tmp |= INT_MAP_COMAOUT | INT_MAP_COMAERR; iowrite32(tmp, regs + CPU_ENPOINTA_MASK_REG); iowrite32(mhba->list_num_io, mhba->ib_shadow); - /* Set InBound List Avaliable count shadow */ + /* Set InBound List Available count shadow */ iowrite32(lower_32_bits(mhba->ib_shadow_phys), regs + CLA_INB_AVAL_COUNT_BASEL); iowrite32(upper_32_bits(mhba->ib_shadow_phys), regs + CLA_INB_AVAL_COUNT_BASEH); - /* Set OutBound List Avaliable count shadow */ + /* Set OutBound List Available count shadow */ iowrite32((mhba->list_num_io-1) | CL_POINTER_TOGGLE, mhba->ob_shadow); iowrite32(lower_32_bits(mhba->ob_shadow_phys), regs + 0x5B0); diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c index 9da426628b9..487e3c8411c 100644 --- a/drivers/scsi/qla4xxx/ql4_os.c +++ b/drivers/scsi/qla4xxx/ql4_os.c @@ -803,7 +803,7 @@ static void qla4xxx_conn_get_stats(struct iscsi_cls_conn *cls_conn, iscsi_stats_dma); if (ret != QLA_SUCCESS) { ql4_printk(KERN_ERR, ha, - "Unable to retreive iscsi stats\n"); + "Unable to retrieve iscsi stats\n"); goto free_stats; } @@ -4338,7 +4338,7 @@ static int qla4xxx_compare_tuple_ddb(struct scsi_qla_host *ha, return QLA_ERROR; /* For multi sessions, driver generates the ISID, so do not compare - * ISID in reset path since it would be a comparision between the + * ISID in reset path since it would be a comparison between the * driver generated ISID and firmware generated ISID. This could * lead to adding duplicated DDBs in the list as driver generated * ISID would not match firmware generated ISID. @@ -5326,7 +5326,7 @@ static void qla4xxx_destroy_fw_ddb_session(struct scsi_qla_host *ha) } } /** - * qla4xxx_remove_adapter - calback function to remove adapter. + * qla4xxx_remove_adapter - callback function to remove adapter. * @pci_dev: PCI device pointer **/ static void __devexit qla4xxx_remove_adapter(struct pci_dev *pdev) diff --git a/drivers/scsi/vmw_pvscsi.c b/drivers/scsi/vmw_pvscsi.c index 4411d422440..20b3a483c2c 100644 --- a/drivers/scsi/vmw_pvscsi.c +++ b/drivers/scsi/vmw_pvscsi.c @@ -295,7 +295,7 @@ static void ll_adapter_reset(const struct pvscsi_adapter *adapter) static void ll_bus_reset(const struct pvscsi_adapter *adapter) { - dev_dbg(pvscsi_dev(adapter), "Reseting bus on %p\n", adapter); + dev_dbg(pvscsi_dev(adapter), "Resetting bus on %p\n", adapter); pvscsi_write_cmd_desc(adapter, PVSCSI_CMD_RESET_BUS, NULL, 0); } @@ -304,7 +304,7 @@ static void ll_device_reset(const struct pvscsi_adapter *adapter, u32 target) { struct PVSCSICmdDescResetDevice cmd = { 0 }; - dev_dbg(pvscsi_dev(adapter), "Reseting device: target=%u\n", target); + dev_dbg(pvscsi_dev(adapter), "Resetting device: target=%u\n", target); cmd.target = target; diff --git a/drivers/spi/spi-au1550.c b/drivers/spi/spi-au1550.c index 5784c879961..4de66d1cfe5 100644 --- a/drivers/spi/spi-au1550.c +++ b/drivers/spi/spi-au1550.c @@ -475,7 +475,7 @@ static irqreturn_t au1550_spi_dma_irq_callback(struct au1550_spi *hw) /* * due to an spi error we consider transfer as done, * so mask all events until before next transfer start - * and stop the possibly running dma immediatelly + * and stop the possibly running dma immediately */ au1550_spi_mask_ack_all(hw); au1xxx_dbdma_stop(hw->dma_rx_ch); diff --git a/drivers/spi/spi-bfin-sport.c b/drivers/spi/spi-bfin-sport.c index 1fe51198a62..6555ecd0730 100644 --- a/drivers/spi/spi-bfin-sport.c +++ b/drivers/spi/spi-bfin-sport.c @@ -467,7 +467,7 @@ bfin_sport_spi_pump_transfers(unsigned long data) dev_dbg(drv_data->dev, "IO write error!\n"); drv_data->state = ERROR_STATE; } else { - /* Update total byte transfered */ + /* Update total byte transferred */ message->actual_length += transfer->len; /* Move to next transfer of this msg */ drv_data->state = bfin_sport_spi_next_transfer(drv_data); diff --git a/drivers/spi/spi-oc-tiny.c b/drivers/spi/spi-oc-tiny.c index 698018fd992..9d9071b730b 100644 --- a/drivers/spi/spi-oc-tiny.c +++ b/drivers/spi/spi-oc-tiny.c @@ -129,7 +129,7 @@ static int tiny_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t) unsigned int i; if (hw->irq >= 0) { - /* use intrrupt driven data transfer */ + /* use interrupt driven data transfer */ hw->len = t->len; hw->txp = t->tx_buf; hw->rxp = t->rx_buf; diff --git a/drivers/spi/spi-ppc4xx.c b/drivers/spi/spi-ppc4xx.c index 75ac9d48ef4..7a85f22b647 100644 --- a/drivers/spi/spi-ppc4xx.c +++ b/drivers/spi/spi-ppc4xx.c @@ -101,7 +101,7 @@ struct spi_ppc4xx_regs { u8 dummy; /* * Clock divisor modulus register - * This uses the follwing formula: + * This uses the following formula: * SCPClkOut = OPBCLK/(4(CDM + 1)) * or * CDM = (OPBCLK/4*SCPClkOut) - 1 @@ -201,7 +201,7 @@ static int spi_ppc4xx_setupxfer(struct spi_device *spi, struct spi_transfer *t) return -EINVAL; } - /* Write new configration */ + /* Write new configuration */ out_8(&hw->regs->mode, cs->mode); /* Set the clock */ diff --git a/drivers/spi/spi-topcliff-pch.c b/drivers/spi/spi-topcliff-pch.c index cd56dcf4632..1284c9b7465 100644 --- a/drivers/spi/spi-topcliff-pch.c +++ b/drivers/spi/spi-topcliff-pch.c @@ -505,7 +505,7 @@ static int pch_spi_transfer(struct spi_device *pspi, struct spi_message *pmsg) } if (unlikely(pspi->max_speed_hz == 0)) { - dev_err(&pspi->dev, "%s pch_spi_tranfer maxspeed=%d\n", + dev_err(&pspi->dev, "%s pch_spi_transfer maxspeed=%d\n", __func__, pspi->max_speed_hz); retval = -EINVAL; goto err_out; diff --git a/drivers/target/iscsi/iscsi_target_parameters.c b/drivers/target/iscsi/iscsi_target_parameters.c index 0c4760fabfc..240f7aa76ed 100644 --- a/drivers/target/iscsi/iscsi_target_parameters.c +++ b/drivers/target/iscsi/iscsi_target_parameters.c @@ -662,7 +662,7 @@ int iscsi_extract_key_value(char *textbuf, char **key, char **value) { *value = strchr(textbuf, '='); if (!*value) { - pr_err("Unable to locate \"=\" seperator for key," + pr_err("Unable to locate \"=\" separator for key," " ignoring request.\n"); return -1; } @@ -1269,7 +1269,7 @@ static int iscsi_check_value(struct iscsi_param *param, char *value) comma_ptr = strchr(value, ','); if (comma_ptr && !IS_TYPE_VALUE_LIST(param)) { - pr_err("Detected value seperator \",\", but" + pr_err("Detected value separator \",\", but" " key \"%s\" does not allow a value list," " protocol error.\n", param->name); return -1; diff --git a/drivers/usb/core/devices.c b/drivers/usb/core/devices.c index d9569658476..3440812b4a8 100644 --- a/drivers/usb/core/devices.c +++ b/drivers/usb/core/devices.c @@ -624,7 +624,7 @@ static ssize_t usb_device_read(struct file *file, char __user *buf, /* print devices for all busses */ list_for_each_entry(bus, &usb_bus_list, bus_list) { /* recurse through all children of the root hub */ - if (!bus->root_hub) + if (!bus_to_hcd(bus)->rh_registered) continue; usb_lock_device(bus->root_hub); ret = usb_device_dump(&buf, &nbytes, &skip_bytes, ppos, diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index bc84106ac05..75ba2091f9b 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -1011,10 +1011,7 @@ static int register_root_hub(struct usb_hcd *hcd) if (retval) { dev_err (parent_dev, "can't register root hub for %s, %d\n", dev_name(&usb_dev->dev), retval); - } - mutex_unlock(&usb_bus_list_lock); - - if (retval == 0) { + } else { spin_lock_irq (&hcd_root_hub_lock); hcd->rh_registered = 1; spin_unlock_irq (&hcd_root_hub_lock); @@ -1023,6 +1020,7 @@ static int register_root_hub(struct usb_hcd *hcd) if (HCD_DEAD(hcd)) usb_hc_died (hcd); /* This time clean up */ } + mutex_unlock(&usb_bus_list_lock); return retval; } diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index aaa8d2bce21..0bf72f943b0 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -467,7 +467,8 @@ static irqreturn_t ohci_hcd_at91_overcurrent_irq(int irq, void *data) /* From the GPIO notifying the over-current situation, find * out the corresponding port */ at91_for_each_port(port) { - if (gpio_to_irq(pdata->overcurrent_pin[port]) == irq) { + if (gpio_is_valid(pdata->overcurrent_pin[port]) && + gpio_to_irq(pdata->overcurrent_pin[port]) == irq) { gpio = pdata->overcurrent_pin[port]; break; } diff --git a/drivers/video/backlight/88pm860x_bl.c b/drivers/video/backlight/88pm860x_bl.c index f75da8758ad..f49181c7311 100644 --- a/drivers/video/backlight/88pm860x_bl.c +++ b/drivers/video/backlight/88pm860x_bl.c @@ -228,7 +228,6 @@ static int pm860x_backlight_probe(struct platform_device *pdev) data->port = pdata->flags; if (data->port < 0) { dev_err(&pdev->dev, "wrong platform data is assigned"); - kfree(data); return -EINVAL; } diff --git a/drivers/video/efifb.c b/drivers/video/efifb.c index b4a632ada40..932abaa58a8 100644 --- a/drivers/video/efifb.c +++ b/drivers/video/efifb.c @@ -553,7 +553,9 @@ static int __init efifb_init(void) int ret; char *option = NULL; - dmi_check_system(dmi_system_table); + if (screen_info.orig_video_isVGA != VIDEO_TYPE_EFI || + !(screen_info.capabilities & VIDEO_CAPABILITY_SKIP_QUIRKS)) + dmi_check_system(dmi_system_table); if (screen_info.orig_video_isVGA != VIDEO_TYPE_EFI) return -ENODEV; diff --git a/drivers/video/exynos/exynos_mipi_dsi.c b/drivers/video/exynos/exynos_mipi_dsi.c index 4bc2b8a5dd8..663c308d0e7 100644 --- a/drivers/video/exynos/exynos_mipi_dsi.c +++ b/drivers/video/exynos/exynos_mipi_dsi.c @@ -461,7 +461,7 @@ static int exynos_mipi_dsi_probe(struct platform_device *pdev) done: platform_set_drvdata(pdev, dsim); - dev_dbg(&pdev->dev, "%s() completed sucessfuly (%s mode)\n", __func__, + dev_dbg(&pdev->dev, "%s() completed successfully (%s mode)\n", __func__, dsim_config->e_interface == DSIM_COMMAND ? "CPU" : "RGB"); return 0; diff --git a/drivers/video/tmiofb.c b/drivers/video/tmiofb.c index 8e4a446b5ed..b244f060f15 100644 --- a/drivers/video/tmiofb.c +++ b/drivers/video/tmiofb.c @@ -694,6 +694,10 @@ static int __devinit tmiofb_probe(struct platform_device *dev) dev_err(&dev->dev, "NULL platform data!\n"); return -EINVAL; } + if (ccr == NULL || lcr == NULL || vram == NULL || irq < 0) { + dev_err(&dev->dev, "missing resources\n"); + return -EINVAL; + } info = framebuffer_alloc(sizeof(struct tmiofb_par), &dev->dev); diff --git a/drivers/w1/masters/ds1wm.c b/drivers/w1/masters/ds1wm.c index 530a2d30906..7c294f4dc0e 100644 --- a/drivers/w1/masters/ds1wm.c +++ b/drivers/w1/masters/ds1wm.c @@ -349,7 +349,7 @@ static void ds1wm_search(void *data, struct w1_master *master_dev, "pass: %d entering ASM\n", pass); ds1wm_write_register(ds1wm_data, DS1WM_CMD, DS1WM_CMD_SRA); dev_dbg(&ds1wm_data->pdev->dev, - "pass: %d begining nibble loop\n", pass); + "pass: %d beginning nibble loop\n", pass); r_prime = 0; d = 0; |