diff options
Diffstat (limited to 'drivers')
30 files changed, 45 insertions, 44 deletions
diff --git a/drivers/block/drbd/drbd_bitmap.c b/drivers/block/drbd/drbd_bitmap.c index 64fbb8385cd..b12c11ec4bd 100644 --- a/drivers/block/drbd/drbd_bitmap.c +++ b/drivers/block/drbd/drbd_bitmap.c @@ -393,7 +393,7 @@ static struct page **bm_realloc_pages(struct drbd_bitmap *b, unsigned long want) * we must not block on IO to ourselves. * Context is receiver thread or dmsetup. */ bytes = sizeof(struct page *)*want; - new_pages = kzalloc(bytes, GFP_NOIO); + new_pages = kzalloc(bytes, GFP_NOIO | __GFP_NOWARN); if (!new_pages) { new_pages = __vmalloc(bytes, GFP_NOIO | __GFP_HIGHMEM | __GFP_ZERO, diff --git a/drivers/clocksource/acpi_pm.c b/drivers/clocksource/acpi_pm.c index 6efe4d1ab3a..6eab8898567 100644 --- a/drivers/clocksource/acpi_pm.c +++ b/drivers/clocksource/acpi_pm.c @@ -200,14 +200,14 @@ static int __init init_acpi_pm_clocksource(void) if ((value2 < value1) && ((value2) < 0xFFF)) break; printk(KERN_INFO "PM-Timer had inconsistent results:" - " 0x%#llx, 0x%#llx - aborting.\n", + " %#llx, %#llx - aborting.\n", value1, value2); pmtmr_ioport = 0; return -EINVAL; } if (i == ACPI_PM_READ_CHECKS) { printk(KERN_INFO "PM-Timer failed consistency check " - " (0x%#llx) - aborting.\n", value1); + " (%#llx) - aborting.\n", value1); pmtmr_ioport = 0; return -ENODEV; } diff --git a/drivers/crypto/ux500/hash/hash_core.c b/drivers/crypto/ux500/hash/hash_core.c index 496ae6aae31..33693d966b6 100644 --- a/drivers/crypto/ux500/hash/hash_core.c +++ b/drivers/crypto/ux500/hash/hash_core.c @@ -282,7 +282,7 @@ static int get_empty_message_digest( } } else { dev_dbg(device_data->dev, "[%s] Continue hash " - "calculation, since hmac key avalable", + "calculation, since hmac key available", __func__); } } diff --git a/drivers/gpu/drm/radeon/r300.c b/drivers/gpu/drm/radeon/r300.c index b9b776f1e58..d8dd269b915 100644 --- a/drivers/gpu/drm/radeon/r300.c +++ b/drivers/gpu/drm/radeon/r300.c @@ -1541,7 +1541,7 @@ int r300_init(struct radeon_device *rdev) rdev->accel_working = true; r = r300_startup(rdev); if (r) { - /* Somethings want wront with the accel init stop accel */ + /* Something went wrong with the accel init, so stop accel */ dev_err(rdev->dev, "Disabling GPU acceleration\n"); r100_cp_fini(rdev); radeon_wb_fini(rdev); diff --git a/drivers/infiniband/hw/ehca/ipz_pt_fn.c b/drivers/infiniband/hw/ehca/ipz_pt_fn.c index 62c71fadb4d..8d594517cd2 100644 --- a/drivers/infiniband/hw/ehca/ipz_pt_fn.c +++ b/drivers/infiniband/hw/ehca/ipz_pt_fn.c @@ -222,7 +222,8 @@ int ipz_queue_ctor(struct ehca_pd *pd, struct ipz_queue *queue, queue->small_page = NULL; /* allocate queue page pointers */ - queue->queue_pages = kzalloc(nr_of_pages * sizeof(void *), GFP_KERNEL); + queue->queue_pages = kzalloc(nr_of_pages * sizeof(void *), + GFP_KERNEL | __GFP_NOWARN); if (!queue->queue_pages) { queue->queue_pages = vzalloc(nr_of_pages * sizeof(void *)); if (!queue->queue_pages) { diff --git a/drivers/media/usb/gspca/vicam.c b/drivers/media/usb/gspca/vicam.c index d6890bc3719..a2275cfe0b8 100644 --- a/drivers/media/usb/gspca/vicam.c +++ b/drivers/media/usb/gspca/vicam.c @@ -6,7 +6,7 @@ * Based on the usbvideo vicam driver, which is: * * Copyright (c) 2002 Joe Burks (jburks@wavicle.org), - * Christopher L Cheney (ccheney@cheney.cx), + * Chris Cheney (chris.cheney@gmail.com), * Pavel Machek (pavel@ucw.cz), * John Tyner (jtyner@cs.ucr.edu), * Monroe Williams (monroe@pobox.com) diff --git a/drivers/net/ethernet/chelsio/cxgb3/cxgb3_offload.c b/drivers/net/ethernet/chelsio/cxgb3/cxgb3_offload.c index 4058b856eb7..76ae09999b5 100644 --- a/drivers/net/ethernet/chelsio/cxgb3/cxgb3_offload.c +++ b/drivers/net/ethernet/chelsio/cxgb3/cxgb3_offload.c @@ -1157,7 +1157,7 @@ static void cxgb_redirect(struct dst_entry *old, struct dst_entry *new, */ void *cxgb_alloc_mem(unsigned long size) { - void *p = kzalloc(size, GFP_KERNEL); + void *p = kzalloc(size, GFP_KERNEL | __GFP_NOWARN); if (!p) p = vzalloc(size); diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c index 79ac77cf62d..0d0665ca6f1 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c @@ -1142,7 +1142,7 @@ out: release_firmware(fw); */ void *t4_alloc_mem(size_t size) { - void *p = kzalloc(size, GFP_KERNEL); + void *p = kzalloc(size, GFP_KERNEL | __GFP_NOWARN); if (!p) p = vzalloc(size); diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c index a1818dae47b..3ca00e05f23 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c @@ -3148,7 +3148,7 @@ int qlcnic_83xx_set_settings(struct qlcnic_adapter *adapter, status = qlcnic_83xx_set_port_config(adapter); if (status) { dev_info(&adapter->pdev->dev, - "Faild to Set Link Speed and autoneg.\n"); + "Failed to Set Link Speed and autoneg.\n"); adapter->ahw->port_config = config; } return status; diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c index b7b245b43b8..11b4bb83b93 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c @@ -1781,7 +1781,7 @@ static int qlcnic_83xx_process_rcv_ring(struct qlcnic_host_sds_ring *sds_ring, break; default: dev_info(&adapter->pdev->dev, - "Unkonwn opcode: 0x%x\n", opcode); + "Unknown opcode: 0x%x\n", opcode); goto skip; } diff --git a/drivers/net/ethernet/sis/sis900.c b/drivers/net/ethernet/sis/sis900.c index b7a39305472..975dc2d8e54 100644 --- a/drivers/net/ethernet/sis/sis900.c +++ b/drivers/net/ethernet/sis/sis900.c @@ -1709,7 +1709,7 @@ static irqreturn_t sis900_interrupt(int irq, void *dev_instance) if(netif_msg_intr(sis_priv)) printk(KERN_DEBUG "%s: exiting interrupt, " - "interrupt status = 0x%#8.8x.\n", + "interrupt status = %#8.8x\n", net_dev->name, sr32(isr)); spin_unlock (&sis_priv->lock); diff --git a/drivers/net/wireless/cw1200/wsm.c b/drivers/net/wireless/cw1200/wsm.c index cbb74d7a9be..9e0ca304865 100644 --- a/drivers/net/wireless/cw1200/wsm.c +++ b/drivers/net/wireless/cw1200/wsm.c @@ -1199,7 +1199,7 @@ bool wsm_flush_tx(struct cw1200_common *priv) if (priv->bh_error) { /* In case of failure do not wait for magic. */ - pr_err("[WSM] Fatal error occured, will not flush TX.\n"); + pr_err("[WSM] Fatal error occurred, will not flush TX.\n"); return false; } else { /* Get a timestamp of "oldest" frame */ diff --git a/drivers/net/wireless/iwlwifi/mvm/time-event.c b/drivers/net/wireless/iwlwifi/mvm/time-event.c index c17b74c3139..76a3c177e10 100644 --- a/drivers/net/wireless/iwlwifi/mvm/time-event.c +++ b/drivers/net/wireless/iwlwifi/mvm/time-event.c @@ -199,7 +199,7 @@ static void iwl_mvm_te_handle_notif(struct iwl_mvm *mvm, * and know the dtim period. */ iwl_mvm_te_check_disconnect(mvm, te_data->vif, - "No assocation and the time event is over already..."); + "No association and the time event is over already..."); iwl_mvm_te_clear_data(mvm, te_data); } else if (le32_to_cpu(notif->action) & TE_V2_NOTIF_HOST_EVENT_START) { te_data->running = true; diff --git a/drivers/net/wireless/rtlwifi/rtl8188ee/fw.c b/drivers/net/wireless/rtlwifi/rtl8188ee/fw.c index 57e4cc5833a..557bc5b8327 100644 --- a/drivers/net/wireless/rtlwifi/rtl8188ee/fw.c +++ b/drivers/net/wireless/rtlwifi/rtl8188ee/fw.c @@ -341,7 +341,7 @@ static void _rtl88e_fill_h2c_command(struct ieee80211_hw *hw, wait_h2c_limit--; if (wait_h2c_limit == 0) { RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD, - "Wating too long for FW read " + "Waiting too long for FW read " "clear HMEBox(%d)!\n", boxnum); break; } @@ -351,7 +351,7 @@ static void _rtl88e_fill_h2c_command(struct ieee80211_hw *hw, isfw_read = _rtl88e_check_fw_read_last_h2c(hw, boxnum); u1b_tmp = rtl_read_byte(rtlpriv, 0x130); RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD, - "Wating for FW read clear HMEBox(%d)!!! " + "Waiting for FW read clear HMEBox(%d)!!! " "0x130 = %2x\n", boxnum, u1b_tmp); } diff --git a/drivers/net/wireless/rtlwifi/rtl8192de/dm.c b/drivers/net/wireless/rtlwifi/rtl8192de/dm.c index 47875ba09ff..f700f7a614b 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192de/dm.c +++ b/drivers/net/wireless/rtlwifi/rtl8192de/dm.c @@ -416,7 +416,7 @@ static void rtl92d_dm_dig(struct ieee80211_hw *hw) /* because we will send data pkt when scanning * this will cause some ap like gear-3700 wep TP - * lower if we retrun here, this is the diff of + * lower if we return here, this is the diff of * mac80211 driver vs ieee80211 driver */ /* if (rtlpriv->mac80211.act_scanning) * return; */ diff --git a/drivers/net/wireless/rtlwifi/rtl8723ae/fw.c b/drivers/net/wireless/rtlwifi/rtl8723ae/fw.c index dedfa1ed3e0..ba1502b172a 100644 --- a/drivers/net/wireless/rtlwifi/rtl8723ae/fw.c +++ b/drivers/net/wireless/rtlwifi/rtl8723ae/fw.c @@ -330,7 +330,7 @@ static void _rtl8723ae_fill_h2c_command(struct ieee80211_hw *hw, wait_h2c_limmit--; if (wait_h2c_limmit == 0) { RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD, - "Wating too long for FW read clear HMEBox(%d)!\n", + "Waiting too long for FW read clear HMEBox(%d)!\n", boxnum); break; } @@ -340,7 +340,7 @@ static void _rtl8723ae_fill_h2c_command(struct ieee80211_hw *hw, isfw_rd = rtl8723ae_check_fw_read_last_h2c(hw, boxnum); u1tmp = rtl_read_byte(rtlpriv, 0x1BF); RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD, - "Wating for FW read clear HMEBox(%d)!!! " + "Waiting for FW read clear HMEBox(%d)!!! " "0x1BF = %2x\n", boxnum, u1tmp); } diff --git a/drivers/power/88pm860x_charger.c b/drivers/power/88pm860x_charger.c index ffff66b1c1a..de029bbc1cc 100644 --- a/drivers/power/88pm860x_charger.c +++ b/drivers/power/88pm860x_charger.c @@ -554,7 +554,7 @@ static irqreturn_t pm860x_vchg_handler(int irq, void *data) OVTEMP_AUTORECOVER, OVTEMP_AUTORECOVER); dev_dbg(info->dev, - "%s, pm8606 over-temp occure\n", __func__); + "%s, pm8606 over-temp occurred\n", __func__); } } @@ -562,7 +562,7 @@ static irqreturn_t pm860x_vchg_handler(int irq, void *data) set_vchg_threshold(info, VCHG_OVP_LOW, 0); info->allowed = 0; dev_dbg(info->dev, - "%s,pm8607 over-vchg occure,vchg = %dmv\n", + "%s,pm8607 over-vchg occurred,vchg = %dmv\n", __func__, vchg); } else if (vchg < VCHG_OVP_LOW) { set_vchg_threshold(info, VCHG_NORMAL_LOW, diff --git a/drivers/power/pm2301_charger.c b/drivers/power/pm2301_charger.c index 1c0bfcbae06..ffa10ed83eb 100644 --- a/drivers/power/pm2301_charger.c +++ b/drivers/power/pm2301_charger.c @@ -386,7 +386,7 @@ static int pm2_int_reg2(void *pm2_data, int val) if (val & (PM2XXX_INT3_ITCHPRECHARGEWD | PM2XXX_INT3_ITCHCCWD | PM2XXX_INT3_ITCHCVWD)) { dev_dbg(pm2->dev, - "Watchdog occured for precharge, CC and CV charge\n"); + "Watchdog occurred for precharge, CC and CV charge\n"); } return ret; diff --git a/drivers/scsi/bfa/bfad_im.c b/drivers/scsi/bfa/bfad_im.c index 9796284512a..9967f9c1485 100644 --- a/drivers/scsi/bfa/bfad_im.c +++ b/drivers/scsi/bfa/bfad_im.c @@ -206,7 +206,7 @@ bfad_im_abort_handler(struct scsi_cmnd *cmnd) spin_lock_irqsave(&bfad->bfad_lock, flags); hal_io = (struct bfa_ioim_s *) cmnd->host_scribble; if (!hal_io) { - /* IO has been completed, retrun success */ + /* IO has been completed, return success */ rc = SUCCESS; goto out; } diff --git a/drivers/scsi/cxgbi/libcxgbi.h b/drivers/scsi/cxgbi/libcxgbi.h index 80fa99b3d38..8135f04671a 100644 --- a/drivers/scsi/cxgbi/libcxgbi.h +++ b/drivers/scsi/cxgbi/libcxgbi.h @@ -658,11 +658,11 @@ static inline u32 cxgbi_tag_nonrsvd_bits(struct cxgbi_tag_format *tformat, static inline void *cxgbi_alloc_big_mem(unsigned int size, gfp_t gfp) { - void *p = kmalloc(size, gfp); + void *p = kzalloc(size, gfp | __GFP_NOWARN); + if (!p) - p = vmalloc(size); - if (p) - memset(p, 0, size); + p = vzalloc(size); + return p; } diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c index b766f5aea58..fac8cf5832d 100644 --- a/drivers/scsi/hpsa.c +++ b/drivers/scsi/hpsa.c @@ -1054,7 +1054,7 @@ free_and_out: } /* - * Lookup bus/target/lun and retrun corresponding struct hpsa_scsi_dev_t * + * Lookup bus/target/lun and return corresponding struct hpsa_scsi_dev_t * * Assume's h->devlock is held. */ static struct hpsa_scsi_dev_t *lookup_hpsa_scsi_dev(struct ctlr_info *h, diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index 22f42f866f7..16498e030c7 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -816,7 +816,7 @@ lpfc_issue_reset(struct device *dev, struct device_attribute *attr, * the readyness after performing a firmware reset. * * Returns: - * zero for success, -EPERM when port does not have privilage to perform the + * zero for success, -EPERM when port does not have privilege to perform the * reset, -EIO when port timeout from recovering from the reset. * * Note: @@ -833,7 +833,7 @@ lpfc_sli4_pdev_status_reg_wait(struct lpfc_hba *phba) lpfc_readl(phba->sli4_hba.u.if_type2.STATUSregaddr, &portstat_reg.word0); - /* verify if privilaged for the request operation */ + /* verify if privileged for the request operation */ if (!bf_get(lpfc_sliport_status_rn, &portstat_reg) && !bf_get(lpfc_sliport_status_err, &portstat_reg)) return -EPERM; @@ -925,9 +925,9 @@ lpfc_sli4_pdev_reg_request(struct lpfc_hba *phba, uint32_t opcode) rc = lpfc_sli4_pdev_status_reg_wait(phba); if (rc == -EPERM) { - /* no privilage for reset */ + /* no privilege for reset */ lpfc_printf_log(phba, KERN_ERR, LOG_SLI, - "3150 No privilage to perform the requested " + "3150 No privilege to perform the requested " "access: x%x\n", reg_val); } else if (rc == -EIO) { /* reset failed, there is nothing more we can do */ diff --git a/drivers/scsi/lpfc/lpfc_bsg.c b/drivers/scsi/lpfc/lpfc_bsg.c index bc270639c1c..79c13c3263f 100644 --- a/drivers/scsi/lpfc/lpfc_bsg.c +++ b/drivers/scsi/lpfc/lpfc_bsg.c @@ -2628,7 +2628,7 @@ err_get_xri_exit: * @phba: Pointer to HBA context object * * This function allocates BSG_MBOX_SIZE (4KB) page size dma buffer and. - * retruns the pointer to the buffer. + * returns the pointer to the buffer. **/ static struct lpfc_dmabuf * lpfc_bsg_dma_page_alloc(struct lpfc_hba *phba) diff --git a/drivers/scsi/megaraid/megaraid_mbox.c b/drivers/scsi/megaraid/megaraid_mbox.c index e6a1e0b38a1..515c9629e9f 100644 --- a/drivers/scsi/megaraid/megaraid_mbox.c +++ b/drivers/scsi/megaraid/megaraid_mbox.c @@ -549,7 +549,7 @@ out_probe_one: /** * megaraid_detach_one - release framework resources and call LLD release routine - * @pdev : handle for our PCI cofiguration space + * @pdev : handle for our PCI configuration space * * This routine is called during driver unload. We free all the allocated * resources and call the corresponding LLD so that it can also release all @@ -979,7 +979,7 @@ megaraid_fini_mbox(adapter_t *adapter) * @adapter : soft state of the raid controller * * Allocate and align the shared mailbox. This maibox is used to issue - * all the commands. For IO based controllers, the mailbox is also regsitered + * all the commands. For IO based controllers, the mailbox is also registered * with the FW. Allocate memory for all commands as well. * This is our big allocator. */ @@ -2027,7 +2027,7 @@ megaraid_mbox_prepare_pthru(adapter_t *adapter, scb_t *scb, * @scb : scsi control block * @scp : scsi command from the mid-layer * - * Prepare a command for the scsi physical devices. This rountine prepares + * Prepare a command for the scsi physical devices. This routine prepares * commands for devices which can take extended CDBs (>10 bytes). */ static void @@ -2586,7 +2586,7 @@ megaraid_abort_handler(struct scsi_cmnd *scp) } /** - * megaraid_reset_handler - device reset hadler for mailbox based driver + * megaraid_reset_handler - device reset handler for mailbox based driver * @scp : reference command * * Reset handler for the mailbox based controller. First try to find out if @@ -3446,7 +3446,7 @@ megaraid_mbox_display_scb(adapter_t *adapter, scb_t *scb) * megaraid_mbox_setup_device_map - manage device ids * @adapter : Driver's soft state * - * Manange the device ids to have an appropriate mapping between the kernel + * Manage the device ids to have an appropriate mapping between the kernel * scsi addresses and megaraid scsi and logical drive addresses. We export * scsi devices on their actual addresses, whereas the logical drives are * exported on a virtual scsi channel. diff --git a/drivers/scsi/megaraid/megaraid_mm.c b/drivers/scsi/megaraid/megaraid_mm.c index 25506c77738..dfffd0f3791 100644 --- a/drivers/scsi/megaraid/megaraid_mm.c +++ b/drivers/scsi/megaraid/megaraid_mm.c @@ -896,7 +896,7 @@ hinfo_to_cinfo(mraid_hba_info_t *hinfo, mcontroller_t *cinfo) /** * mraid_mm_register_adp - Registration routine for low level drivers - * @lld_adp : Adapter objejct + * @lld_adp : Adapter object */ int mraid_mm_register_adp(mraid_mmadp_t *lld_adp) diff --git a/drivers/scsi/megaraid/megaraid_sas_fusion.h b/drivers/scsi/megaraid/megaraid_sas_fusion.h index 12ff01cf679..4eb84011cb0 100644 --- a/drivers/scsi/megaraid/megaraid_sas_fusion.h +++ b/drivers/scsi/megaraid/megaraid_sas_fusion.h @@ -88,7 +88,7 @@ enum MR_RAID_FLAGS_IO_SUB_TYPE { #define MEGASAS_FUSION_IN_RESET 0 /* - * Raid Context structure which describes MegaRAID specific IO Paramenters + * Raid Context structure which describes MegaRAID specific IO Parameters * This resides at offset 0x60 where the SGL normally starts in MPT IO Frames */ diff --git a/drivers/scsi/qla2xxx/qla_bsg.c b/drivers/scsi/qla2xxx/qla_bsg.c index b989add77ec..aa57bf0af57 100644 --- a/drivers/scsi/qla2xxx/qla_bsg.c +++ b/drivers/scsi/qla2xxx/qla_bsg.c @@ -1895,7 +1895,7 @@ done: bsg_job->reply->reply_payload_rcv_len = 0; bsg_job->reply->result = (DID_OK) << 16; bsg_job->job_done(bsg_job); - /* Always retrun success, vendor rsp carries correct status */ + /* Always return success, vendor rsp carries correct status */ return 0; } diff --git a/drivers/scsi/qla2xxx/qla_mr.c b/drivers/scsi/qla2xxx/qla_mr.c index 2482975d72b..62ee7131b20 100644 --- a/drivers/scsi/qla2xxx/qla_mr.c +++ b/drivers/scsi/qla2xxx/qla_mr.c @@ -1865,7 +1865,7 @@ qlafx00_fx_disc(scsi_qla_host_t *vha, fc_port_t *fcport, uint16_t fx_type) p_sysid = utsname(); if (!p_sysid) { ql_log(ql_log_warn, vha, 0x303c, - "Not able to get the system informtion\n"); + "Not able to get the system information\n"); goto done_free_sp; } break; diff --git a/drivers/spi/spi-bitbang.c b/drivers/spi/spi-bitbang.c index e3946e44e07..8c11355dec2 100644 --- a/drivers/spi/spi-bitbang.c +++ b/drivers/spi/spi-bitbang.c @@ -40,7 +40,7 @@ * to glue code. These bitbang setup() and cleanup() routines are always * used, though maybe they're called from controller-aware code. * - * chipselect() and friends may use use spi_device->controller_data and + * chipselect() and friends may use spi_device->controller_data and * controller registers as appropriate. * * diff --git a/drivers/tty/serial/kgdboc.c b/drivers/tty/serial/kgdboc.c index 10020547c60..a260cde743e 100644 --- a/drivers/tty/serial/kgdboc.c +++ b/drivers/tty/serial/kgdboc.c @@ -45,7 +45,7 @@ static int kgdboc_reset_connect(struct input_handler *handler, { input_reset_device(dev); - /* Retrun an error - we do not want to bind, just to reset */ + /* Return an error - we do not want to bind, just to reset */ return -ENODEV; } |