diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/i2c/busses/i2c-gpio.c | 98 | ||||
-rw-r--r-- | drivers/mtd/nand/atmel_nand.c | 136 | ||||
-rw-r--r-- | drivers/of/Kconfig | 4 | ||||
-rw-r--r-- | drivers/of/Makefile | 1 | ||||
-rw-r--r-- | drivers/of/of_mtd.c | 85 | ||||
-rw-r--r-- | drivers/rtc/rtc-mv.c | 9 | ||||
-rw-r--r-- | drivers/spi/spi-orion.c | 5 | ||||
-rw-r--r-- | drivers/staging/ste_rmi4/Makefile | 2 | ||||
-rw-r--r-- | drivers/usb/Kconfig | 2 | ||||
-rw-r--r-- | drivers/usb/gadget/Kconfig | 2 | ||||
-rw-r--r-- | drivers/usb/gadget/at91_udc.c | 40 | ||||
-rw-r--r-- | drivers/usb/host/ehci-atmel.c | 24 | ||||
-rw-r--r-- | drivers/usb/host/ohci-at91.c | 101 | ||||
-rw-r--r-- | drivers/watchdog/orion_wdt.c | 24 |
14 files changed, 452 insertions, 81 deletions
diff --git a/drivers/i2c/busses/i2c-gpio.c b/drivers/i2c/busses/i2c-gpio.c index a651779d9ff..c0330a41db0 100644 --- a/drivers/i2c/busses/i2c-gpio.c +++ b/drivers/i2c/busses/i2c-gpio.c @@ -14,8 +14,15 @@ #include <linux/module.h> #include <linux/slab.h> #include <linux/platform_device.h> - -#include <asm/gpio.h> +#include <linux/gpio.h> +#include <linux/of_gpio.h> +#include <linux/of_i2c.h> + +struct i2c_gpio_private_data { + struct i2c_adapter adap; + struct i2c_algo_bit_data bit_data; + struct i2c_gpio_platform_data pdata; +}; /* Toggle SDA by changing the direction of the pin */ static void i2c_gpio_setsda_dir(void *data, int state) @@ -78,24 +85,62 @@ static int i2c_gpio_getscl(void *data) return gpio_get_value(pdata->scl_pin); } +static int __devinit of_i2c_gpio_probe(struct device_node *np, + struct i2c_gpio_platform_data *pdata) +{ + u32 reg; + + if (of_gpio_count(np) < 2) + return -ENODEV; + + pdata->sda_pin = of_get_gpio(np, 0); + pdata->scl_pin = of_get_gpio(np, 1); + + if (!gpio_is_valid(pdata->sda_pin) || !gpio_is_valid(pdata->scl_pin)) { + pr_err("%s: invalid GPIO pins, sda=%d/scl=%d\n", + np->full_name, pdata->sda_pin, pdata->scl_pin); + return -ENODEV; + } + + of_property_read_u32(np, "i2c-gpio,delay-us", &pdata->udelay); + + if (!of_property_read_u32(np, "i2c-gpio,timeout-ms", ®)) + pdata->timeout = msecs_to_jiffies(reg); + + pdata->sda_is_open_drain = + of_property_read_bool(np, "i2c-gpio,sda-open-drain"); + pdata->scl_is_open_drain = + of_property_read_bool(np, "i2c-gpio,scl-open-drain"); + pdata->scl_is_output_only = + of_property_read_bool(np, "i2c-gpio,scl-output-only"); + + return 0; +} + static int __devinit i2c_gpio_probe(struct platform_device *pdev) { + struct i2c_gpio_private_data *priv; struct i2c_gpio_platform_data *pdata; struct i2c_algo_bit_data *bit_data; struct i2c_adapter *adap; int ret; - pdata = pdev->dev.platform_data; - if (!pdata) - return -ENXIO; - - ret = -ENOMEM; - adap = kzalloc(sizeof(struct i2c_adapter), GFP_KERNEL); - if (!adap) - goto err_alloc_adap; - bit_data = kzalloc(sizeof(struct i2c_algo_bit_data), GFP_KERNEL); - if (!bit_data) - goto err_alloc_bit_data; + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + adap = &priv->adap; + bit_data = &priv->bit_data; + pdata = &priv->pdata; + + if (pdev->dev.of_node) { + ret = of_i2c_gpio_probe(pdev->dev.of_node, pdata); + if (ret) + return ret; + } else { + if (!pdev->dev.platform_data) + return -ENXIO; + memcpy(pdata, pdev->dev.platform_data, sizeof(*pdata)); + } ret = gpio_request(pdata->sda_pin, "sda"); if (ret) @@ -143,6 +188,7 @@ static int __devinit i2c_gpio_probe(struct platform_device *pdev) adap->algo_data = bit_data; adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD; adap->dev.parent = &pdev->dev; + adap->dev.of_node = pdev->dev.of_node; /* * If "dev->id" is negative we consider it as zero. @@ -154,7 +200,9 @@ static int __devinit i2c_gpio_probe(struct platform_device *pdev) if (ret) goto err_add_bus; - platform_set_drvdata(pdev, adap); + of_i2c_register_devices(adap); + + platform_set_drvdata(pdev, priv); dev_info(&pdev->dev, "using pins %u (SDA) and %u (SCL%s)\n", pdata->sda_pin, pdata->scl_pin, @@ -168,34 +216,40 @@ err_add_bus: err_request_scl: gpio_free(pdata->sda_pin); err_request_sda: - kfree(bit_data); -err_alloc_bit_data: - kfree(adap); -err_alloc_adap: return ret; } static int __devexit i2c_gpio_remove(struct platform_device *pdev) { + struct i2c_gpio_private_data *priv; struct i2c_gpio_platform_data *pdata; struct i2c_adapter *adap; - adap = platform_get_drvdata(pdev); - pdata = pdev->dev.platform_data; + priv = platform_get_drvdata(pdev); + adap = &priv->adap; + pdata = &priv->pdata; i2c_del_adapter(adap); gpio_free(pdata->scl_pin); gpio_free(pdata->sda_pin); - kfree(adap->algo_data); - kfree(adap); return 0; } +#if defined(CONFIG_OF) +static const struct of_device_id i2c_gpio_dt_ids[] = { + { .compatible = "i2c-gpio", }, + { /* sentinel */ } +}; + +MODULE_DEVICE_TABLE(of, i2c_gpio_dt_ids); +#endif + static struct platform_driver i2c_gpio_driver = { .driver = { .name = "i2c-gpio", .owner = THIS_MODULE, + .of_match_table = of_match_ptr(i2c_gpio_dt_ids), }, .probe = i2c_gpio_probe, .remove = __devexit_p(i2c_gpio_remove), diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c index 35b4fb55dbd..ae7e37d9ac1 100644 --- a/drivers/mtd/nand/atmel_nand.c +++ b/drivers/mtd/nand/atmel_nand.c @@ -27,6 +27,10 @@ #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/platform_device.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/of_gpio.h> +#include <linux/of_mtd.h> #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> @@ -34,22 +38,10 @@ #include <linux/dmaengine.h> #include <linux/gpio.h> #include <linux/io.h> +#include <linux/platform_data/atmel.h> -#include <mach/board.h> #include <mach/cpu.h> -#ifdef CONFIG_MTD_NAND_ATMEL_ECC_HW -#define hard_ecc 1 -#else -#define hard_ecc 0 -#endif - -#ifdef CONFIG_MTD_NAND_ATMEL_ECC_NONE -#define no_ecc 1 -#else -#define no_ecc 0 -#endif - static int use_dma = 1; module_param(use_dma, int, 0); @@ -95,7 +87,7 @@ struct atmel_nand_host { struct mtd_info mtd; void __iomem *io_base; dma_addr_t io_phys; - struct atmel_nand_data *board; + struct atmel_nand_data board; struct device *dev; void __iomem *ecc; @@ -113,8 +105,8 @@ static int cpu_has_dma(void) */ static void atmel_nand_enable(struct atmel_nand_host *host) { - if (gpio_is_valid(host->board->enable_pin)) - gpio_set_value(host->board->enable_pin, 0); + if (gpio_is_valid(host->board.enable_pin)) + gpio_set_value(host->board.enable_pin, 0); } /* @@ -122,8 +114,8 @@ static void atmel_nand_enable(struct atmel_nand_host *host) */ static void atmel_nand_disable(struct atmel_nand_host *host) { - if (gpio_is_valid(host->board->enable_pin)) - gpio_set_value(host->board->enable_pin, 1); + if (gpio_is_valid(host->board.enable_pin)) + gpio_set_value(host->board.enable_pin, 1); } /* @@ -144,9 +136,9 @@ static void atmel_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl return; if (ctrl & NAND_CLE) - writeb(cmd, host->io_base + (1 << host->board->cle)); + writeb(cmd, host->io_base + (1 << host->board.cle)); else - writeb(cmd, host->io_base + (1 << host->board->ale)); + writeb(cmd, host->io_base + (1 << host->board.ale)); } /* @@ -157,8 +149,8 @@ static int atmel_nand_device_ready(struct mtd_info *mtd) struct nand_chip *nand_chip = mtd->priv; struct atmel_nand_host *host = nand_chip->priv; - return gpio_get_value(host->board->rdy_pin) ^ - !!host->board->rdy_pin_active_low; + return gpio_get_value(host->board.rdy_pin) ^ + !!host->board.rdy_pin_active_low; } /* @@ -273,7 +265,7 @@ static void atmel_read_buf(struct mtd_info *mtd, u8 *buf, int len) if (atmel_nand_dma_op(mtd, buf, len, 1) == 0) return; - if (host->board->bus_width_16) + if (host->board.bus_width_16) atmel_read_buf16(mtd, buf, len); else atmel_read_buf8(mtd, buf, len); @@ -289,7 +281,7 @@ static void atmel_write_buf(struct mtd_info *mtd, const u8 *buf, int len) if (atmel_nand_dma_op(mtd, (void *)buf, len, 0) == 0) return; - if (host->board->bus_width_16) + if (host->board.bus_width_16) atmel_write_buf16(mtd, buf, len); else atmel_write_buf8(mtd, buf, len); @@ -481,6 +473,56 @@ static void atmel_nand_hwctl(struct mtd_info *mtd, int mode) } } +#if defined(CONFIG_OF) +static int __devinit atmel_of_init_port(struct atmel_nand_host *host, + struct device_node *np) +{ + u32 val; + int ecc_mode; + struct atmel_nand_data *board = &host->board; + enum of_gpio_flags flags; + + if (of_property_read_u32(np, "atmel,nand-addr-offset", &val) == 0) { + if (val >= 32) { + dev_err(host->dev, "invalid addr-offset %u\n", val); + return -EINVAL; + } + board->ale = val; + } + + if (of_property_read_u32(np, "atmel,nand-cmd-offset", &val) == 0) { + if (val >= 32) { + dev_err(host->dev, "invalid cmd-offset %u\n", val); + return -EINVAL; + } + board->cle = val; + } + + ecc_mode = of_get_nand_ecc_mode(np); + + board->ecc_mode = ecc_mode < 0 ? NAND_ECC_SOFT : ecc_mode; + + board->on_flash_bbt = of_get_nand_on_flash_bbt(np); + + if (of_get_nand_bus_width(np) == 16) + board->bus_width_16 = 1; + + board->rdy_pin = of_get_gpio_flags(np, 0, &flags); + board->rdy_pin_active_low = (flags == OF_GPIO_ACTIVE_LOW); + + board->enable_pin = of_get_gpio(np, 1); + board->det_pin = of_get_gpio(np, 2); + + return 0; +} +#else +static int __devinit atmel_of_init_port(struct atmel_nand_host *host, + struct device_node *np) +{ + return -EINVAL; +} +#endif + /* * Probe for the NAND device. */ @@ -491,6 +533,7 @@ static int __init atmel_nand_probe(struct platform_device *pdev) struct nand_chip *nand_chip; struct resource *regs; struct resource *mem; + struct mtd_part_parser_data ppdata = {}; int res; mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -517,8 +560,15 @@ static int __init atmel_nand_probe(struct platform_device *pdev) mtd = &host->mtd; nand_chip = &host->nand_chip; - host->board = pdev->dev.platform_data; host->dev = &pdev->dev; + if (pdev->dev.of_node) { + res = atmel_of_init_port(host, pdev->dev.of_node); + if (res) + goto err_nand_ioremap; + } else { + memcpy(&host->board, pdev->dev.platform_data, + sizeof(struct atmel_nand_data)); + } nand_chip->priv = host; /* link the private data structures */ mtd->priv = nand_chip; @@ -529,26 +579,25 @@ static int __init atmel_nand_probe(struct platform_device *pdev) nand_chip->IO_ADDR_W = host->io_base; nand_chip->cmd_ctrl = atmel_nand_cmd_ctrl; - if (gpio_is_valid(host->board->rdy_pin)) + if (gpio_is_valid(host->board.rdy_pin)) nand_chip->dev_ready = atmel_nand_device_ready; + nand_chip->ecc.mode = host->board.ecc_mode; + regs = platform_get_resource(pdev, IORESOURCE_MEM, 1); - if (!regs && hard_ecc) { + if (!regs && nand_chip->ecc.mode == NAND_ECC_HW) { printk(KERN_ERR "atmel_nand: can't get I/O resource " "regs\nFalling back on software ECC\n"); + nand_chip->ecc.mode = NAND_ECC_SOFT; } - nand_chip->ecc.mode = NAND_ECC_SOFT; /* enable ECC */ - if (no_ecc) - nand_chip->ecc.mode = NAND_ECC_NONE; - if (hard_ecc && regs) { + if (nand_chip->ecc.mode == NAND_ECC_HW) { host->ecc = ioremap(regs->start, resource_size(regs)); if (host->ecc == NULL) { printk(KERN_ERR "atmel_nand: ioremap failed\n"); res = -EIO; goto err_ecc_ioremap; } - nand_chip->ecc.mode = NAND_ECC_HW; nand_chip->ecc.calculate = atmel_nand_calculate; nand_chip->ecc.correct = atmel_nand_correct; nand_chip->ecc.hwctl = atmel_nand_hwctl; @@ -558,7 +607,7 @@ static int __init atmel_nand_probe(struct platform_device *pdev) nand_chip->chip_delay = 20; /* 20us command delay time */ - if (host->board->bus_width_16) /* 16-bit bus width */ + if (host->board.bus_width_16) /* 16-bit bus width */ nand_chip->options |= NAND_BUSWIDTH_16; nand_chip->read_buf = atmel_read_buf; @@ -567,15 +616,15 @@ static int __init atmel_nand_probe(struct platform_device *pdev) platform_set_drvdata(pdev, host); atmel_nand_enable(host); - if (gpio_is_valid(host->board->det_pin)) { - if (gpio_get_value(host->board->det_pin)) { + if (gpio_is_valid(host->board.det_pin)) { + if (gpio_get_value(host->board.det_pin)) { printk(KERN_INFO "No SmartMedia card inserted.\n"); res = -ENXIO; goto err_no_card; } } - if (on_flash_bbt) { + if (host->board.on_flash_bbt || on_flash_bbt) { printk(KERN_INFO "atmel_nand: Use On Flash BBT\n"); nand_chip->bbt_options |= NAND_BBT_USE_FLASH; } @@ -650,8 +699,9 @@ static int __init atmel_nand_probe(struct platform_device *pdev) } mtd->name = "atmel_nand"; - res = mtd_device_parse_register(mtd, NULL, 0, - host->board->parts, host->board->num_parts); + ppdata.of_node = pdev->dev.of_node; + res = mtd_device_parse_register(mtd, NULL, &ppdata, + host->board.parts, host->board.num_parts); if (!res) return res; @@ -695,11 +745,21 @@ static int __exit atmel_nand_remove(struct platform_device *pdev) return 0; } +#if defined(CONFIG_OF) +static const struct of_device_id atmel_nand_dt_ids[] = { + { .compatible = "atmel,at91rm9200-nand" }, + { /* sentinel */ } +}; + +MODULE_DEVICE_TABLE(of, atmel_nand_dt_ids); +#endif + static struct platform_driver atmel_nand_driver = { .remove = __exit_p(atmel_nand_remove), .driver = { .name = "atmel_nand", .owner = THIS_MODULE, + .of_match_table = of_match_ptr(atmel_nand_dt_ids), }, }; diff --git a/drivers/of/Kconfig b/drivers/of/Kconfig index 6ea51dcbc72..8e84ce9765a 100644 --- a/drivers/of/Kconfig +++ b/drivers/of/Kconfig @@ -91,4 +91,8 @@ config OF_PCI_IRQ help OpenFirmware PCI IRQ routing helpers +config OF_MTD + depends on MTD + def_bool y + endmenu # OF diff --git a/drivers/of/Makefile b/drivers/of/Makefile index a73f5a51ff4..aa90e602c8a 100644 --- a/drivers/of/Makefile +++ b/drivers/of/Makefile @@ -12,3 +12,4 @@ obj-$(CONFIG_OF_SELFTEST) += selftest.o obj-$(CONFIG_OF_MDIO) += of_mdio.o obj-$(CONFIG_OF_PCI) += of_pci.o obj-$(CONFIG_OF_PCI_IRQ) += of_pci_irq.o +obj-$(CONFIG_OF_MTD) += of_mtd.o diff --git a/drivers/of/of_mtd.c b/drivers/of/of_mtd.c new file mode 100644 index 00000000000..e7cad627a5d --- /dev/null +++ b/drivers/of/of_mtd.c @@ -0,0 +1,85 @@ +/* + * Copyright 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * OF helpers for mtd. + * + * This file is released under the GPLv2 + * + */ +#include <linux/kernel.h> +#include <linux/of_mtd.h> +#include <linux/mtd/nand.h> +#include <linux/export.h> + +/** + * It maps 'enum nand_ecc_modes_t' found in include/linux/mtd/nand.h + * into the device tree binding of 'nand-ecc', so that MTD + * device driver can get nand ecc from device tree. + */ +static const char *nand_ecc_modes[] = { + [NAND_ECC_NONE] = "none", + [NAND_ECC_SOFT] = "soft", + [NAND_ECC_HW] = "hw", + [NAND_ECC_HW_SYNDROME] = "hw_syndrome", + [NAND_ECC_HW_OOB_FIRST] = "hw_oob_first", + [NAND_ECC_SOFT_BCH] = "soft_bch", +}; + +/** + * of_get_nand_ecc_mode - Get nand ecc mode for given device_node + * @np: Pointer to the given device_node + * + * The function gets ecc mode string from property 'nand-ecc-mode', + * and return its index in nand_ecc_modes table, or errno in error case. + */ +const int of_get_nand_ecc_mode(struct device_node *np) +{ + const char *pm; + int err, i; + + err = of_property_read_string(np, "nand-ecc-mode", &pm); + if (err < 0) + return err; + + for (i = 0; i < ARRAY_SIZE(nand_ecc_modes); i++) + if (!strcasecmp(pm, nand_ecc_modes[i])) + return i; + + return -ENODEV; +} +EXPORT_SYMBOL_GPL(of_get_nand_ecc_mode); + +/** + * of_get_nand_bus_width - Get nand bus witdh for given device_node + * @np: Pointer to the given device_node + * + * return bus width option, or errno in error case. + */ +int of_get_nand_bus_width(struct device_node *np) +{ + u32 val; + + if (of_property_read_u32(np, "nand-bus-width", &val)) + return 8; + + switch(val) { + case 8: + case 16: + return val; + default: + return -EIO; + } +} +EXPORT_SYMBOL_GPL(of_get_nand_bus_width); + +/** + * of_get_nand_on_flash_bbt - Get nand on flash bbt for given device_node + * @np: Pointer to the given device_node + * + * return true if present false other wise + */ +bool of_get_nand_on_flash_bbt(struct device_node *np) +{ + return of_property_read_bool(np, "nand-on-flash-bbt"); +} +EXPORT_SYMBOL_GPL(of_get_nand_on_flash_bbt); diff --git a/drivers/rtc/rtc-mv.c b/drivers/rtc/rtc-mv.c index 1300962486d..b2185f4255a 100644 --- a/drivers/rtc/rtc-mv.c +++ b/drivers/rtc/rtc-mv.c @@ -12,6 +12,7 @@ #include <linux/bcd.h> #include <linux/io.h> #include <linux/platform_device.h> +#include <linux/of.h> #include <linux/delay.h> #include <linux/gfp.h> #include <linux/module.h> @@ -294,11 +295,19 @@ static int __exit mv_rtc_remove(struct platform_device *pdev) return 0; } +#ifdef CONFIG_OF +static struct of_device_id rtc_mv_of_match_table[] = { + { .compatible = "mrvl,orion-rtc", }, + {} +}; +#endif + static struct platform_driver mv_rtc_driver = { .remove = __exit_p(mv_rtc_remove), .driver = { .name = "rtc-mv", .owner = THIS_MODULE, + .of_match_table = of_match_ptr(rtc_mv_of_match_table), }, }; diff --git a/drivers/spi/spi-orion.c b/drivers/spi/spi-orion.c index 13448c832c4..e496f799b7a 100644 --- a/drivers/spi/spi-orion.c +++ b/drivers/spi/spi-orion.c @@ -359,11 +359,6 @@ static int orion_spi_setup(struct spi_device *spi) orion_spi = spi_master_get_devdata(spi->master); - /* Fix ac timing if required. */ - if (orion_spi->spi_info->enable_clock_fix) - orion_spi_setbits(orion_spi, ORION_SPI_IF_CONFIG_REG, - (1 << 14)); - if ((spi->max_speed_hz == 0) || (spi->max_speed_hz > orion_spi->max_speed)) spi->max_speed_hz = orion_spi->max_speed; diff --git a/drivers/staging/ste_rmi4/Makefile b/drivers/staging/ste_rmi4/Makefile index 176f4690057..e4c03351420 100644 --- a/drivers/staging/ste_rmi4/Makefile +++ b/drivers/staging/ste_rmi4/Makefile @@ -2,4 +2,4 @@ # Makefile for the RMI4 touchscreen driver. # obj-$(CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4) += synaptics_i2c_rmi4.o -obj-$(CONFIG_MACH_U8500) += board-mop500-u8500uib-rmi4.o +obj-$(CONFIG_MACH_MOP500) += board-mop500-u8500uib-rmi4.o diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index 48ac6e781ba..cbd8f5f8059 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -44,7 +44,7 @@ config USB_ARCH_HAS_EHCI default y if PPC_MPC512x default y if ARCH_IXP4XX default y if ARCH_W90X900 - default y if ARCH_AT91SAM9G45 + default y if ARCH_AT91 default y if ARCH_MXC default y if ARCH_OMAP3 default y if ARCH_CNS3XXX diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 26c0b75f152..2633f759511 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -137,7 +137,7 @@ choice config USB_AT91 tristate "Atmel AT91 USB Device Port" - depends on ARCH_AT91 && !ARCH_AT91SAM9RL && !ARCH_AT91SAM9G45 + depends on ARCH_AT91 help Many Atmel AT91 processors (such as the AT91RM2000) have a full speed USB Device Port with support for five configurable diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c index 2db5f68f796..36fd2b4b49a 100644 --- a/drivers/usb/gadget/at91_udc.c +++ b/drivers/usb/gadget/at91_udc.c @@ -29,6 +29,8 @@ #include <linux/clk.h> #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> +#include <linux/of.h> +#include <linux/of_gpio.h> #include <asm/byteorder.h> #include <mach/hardware.h> @@ -1707,7 +1709,27 @@ static void at91udc_shutdown(struct platform_device *dev) spin_unlock_irqrestore(&udc->lock, flags); } -static int __init at91udc_probe(struct platform_device *pdev) +static void __devinit at91udc_of_init(struct at91_udc *udc, + struct device_node *np) +{ + struct at91_udc_data *board = &udc->board; + u32 val; + enum of_gpio_flags flags; + + if (of_property_read_u32(np, "atmel,vbus-polled", &val) == 0) + board->vbus_polled = 1; + + board->vbus_pin = of_get_named_gpio_flags(np, "atmel,vbus-gpio", 0, + &flags); + board->vbus_active_low = (flags & OF_GPIO_ACTIVE_LOW) ? 1 : 0; + + board->pullup_pin = of_get_named_gpio_flags(np, "atmel,pullup-gpio", 0, + &flags); + + board->pullup_active_low = (flags & OF_GPIO_ACTIVE_LOW) ? 1 : 0; +} + +static int __devinit at91udc_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct at91_udc *udc; @@ -1742,7 +1764,11 @@ static int __init at91udc_probe(struct platform_device *pdev) /* init software state */ udc = &controller; udc->gadget.dev.parent = dev; - udc->board = *(struct at91_udc_data *) dev->platform_data; + if (pdev->dev.of_node) + at91udc_of_init(udc, pdev->dev.of_node); + else + memcpy(&udc->board, dev->platform_data, + sizeof(struct at91_udc_data)); udc->pdev = pdev; udc->enabled = 0; spin_lock_init(&udc->lock); @@ -1971,6 +1997,15 @@ static int at91udc_resume(struct platform_device *pdev) #define at91udc_resume NULL #endif +#if defined(CONFIG_OF) +static const struct of_device_id at91_udc_dt_ids[] = { + { .compatible = "atmel,at91rm9200-udc" }, + { /* sentinel */ } +}; + +MODULE_DEVICE_TABLE(of, at91_udc_dt_ids); +#endif + static struct platform_driver at91_udc_driver = { .remove = __exit_p(at91udc_remove), .shutdown = at91udc_shutdown, @@ -1979,6 +2014,7 @@ static struct platform_driver at91_udc_driver = { .driver = { .name = (char *) driver_name, .owner = THIS_MODULE, + .of_match_table = of_match_ptr(at91_udc_dt_ids), }, }; diff --git a/drivers/usb/host/ehci-atmel.c b/drivers/usb/host/ehci-atmel.c index a5a3ef1f009..19f318ababa 100644 --- a/drivers/usb/host/ehci-atmel.c +++ b/drivers/usb/host/ehci-atmel.c @@ -13,6 +13,7 @@ #include <linux/clk.h> #include <linux/platform_device.h> +#include <linux/of_platform.h> /* interface and function clocks */ static struct clk *iclk, *fclk; @@ -115,6 +116,8 @@ static const struct hc_driver ehci_atmel_hc_driver = { .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, }; +static u64 at91_ehci_dma_mask = DMA_BIT_MASK(32); + static int __devinit ehci_atmel_drv_probe(struct platform_device *pdev) { struct usb_hcd *hcd; @@ -137,6 +140,13 @@ static int __devinit ehci_atmel_drv_probe(struct platform_device *pdev) goto fail_create_hcd; } + /* Right now device-tree probed devices don't get dma_mask set. + * Since shared usb code relies on it, set it here for now. + * Once we have dma capability bindings this can go away. + */ + if (!pdev->dev.dma_mask) + pdev->dev.dma_mask = &at91_ehci_dma_mask; + hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev)); if (!hcd) { retval = -ENOMEM; @@ -225,9 +235,21 @@ static int __devexit ehci_atmel_drv_remove(struct platform_device *pdev) return 0; } +#ifdef CONFIG_OF +static const struct of_device_id atmel_ehci_dt_ids[] = { + { .compatible = "atmel,at91sam9g45-ehci" }, + { /* sentinel */ } +}; + +MODULE_DEVICE_TABLE(of, atmel_ehci_dt_ids); +#endif + static struct platform_driver ehci_atmel_driver = { .probe = ehci_atmel_drv_probe, .remove = __devexit_p(ehci_atmel_drv_remove), .shutdown = usb_hcd_platform_shutdown, - .driver.name = "atmel-ehci", + .driver = { + .name = "atmel-ehci", + .of_match_table = of_match_ptr(atmel_ehci_dt_ids), + }, }; diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index 8e855eb0bf8..db8963f5fbc 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -14,6 +14,8 @@ #include <linux/clk.h> #include <linux/platform_device.h> +#include <linux/of_platform.h> +#include <linux/of_gpio.h> #include <mach/hardware.h> #include <asm/gpio.h> @@ -477,13 +479,109 @@ static irqreturn_t ohci_hcd_at91_overcurrent_irq(int irq, void *data) return IRQ_HANDLED; } +#ifdef CONFIG_OF +static const struct of_device_id at91_ohci_dt_ids[] = { + { .compatible = "atmel,at91rm9200-ohci" }, + { /* sentinel */ } +}; + +MODULE_DEVICE_TABLE(of, at91_ohci_dt_ids); + +static u64 at91_ohci_dma_mask = DMA_BIT_MASK(32); + +static int __devinit ohci_at91_of_init(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + int i, ret, gpio; + enum of_gpio_flags flags; + struct at91_usbh_data *pdata; + u32 ports; + + if (!np) + return 0; + + /* Right now device-tree probed devices don't get dma_mask set. + * Since shared usb code relies on it, set it here for now. + * Once we have dma capability bindings this can go away. + */ + if (!pdev->dev.dma_mask) + pdev->dev.dma_mask = &at91_ohci_dma_mask; + + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return -ENOMEM; + + if (!of_property_read_u32(np, "num-ports", &ports)) + pdata->ports = ports; + + for (i = 0; i < 2; i++) { + gpio = of_get_named_gpio_flags(np, "atmel,vbus-gpio", i, &flags); + pdata->vbus_pin[i] = gpio; + if (!gpio_is_valid(gpio)) + continue; + pdata->vbus_pin_active_low[i] = flags & OF_GPIO_ACTIVE_LOW; + ret = gpio_request(gpio, "ohci_vbus"); + if (ret) { + dev_warn(&pdev->dev, "can't request vbus gpio %d", gpio); + continue; + } + ret = gpio_direction_output(gpio, !(flags & OF_GPIO_ACTIVE_LOW) ^ 1); + if (ret) + dev_warn(&pdev->dev, "can't put vbus gpio %d as output %d", + !(flags & OF_GPIO_ACTIVE_LOW) ^ 1, gpio); + } + + for (i = 0; i < 2; i++) { + gpio = of_get_named_gpio_flags(np, "atmel,oc-gpio", i, &flags); + pdata->overcurrent_pin[i] = gpio; + if (!gpio_is_valid(gpio)) + continue; + ret = gpio_request(gpio, "ohci_overcurrent"); + if (ret) { + dev_err(&pdev->dev, "can't request overcurrent gpio %d", gpio); + continue; + } + + ret = gpio_direction_input(gpio); + if (ret) { + dev_err(&pdev->dev, "can't configure overcurrent gpio %d as input", gpio); + continue; + } + + ret = request_irq(gpio_to_irq(gpio), + ohci_hcd_at91_overcurrent_irq, + IRQF_SHARED, "ohci_overcurrent", pdev); + if (ret) { + gpio_free(gpio); + dev_warn(& pdev->dev, "cannot get GPIO IRQ for overcurrent\n"); + } + } + + pdev->dev.platform_data = pdata; + + return 0; +} +#else +static int __devinit ohci_at91_of_init(struct platform_device *pdev) +{ + return 0; +} +#endif + /*-------------------------------------------------------------------------*/ static int ohci_hcd_at91_drv_probe(struct platform_device *pdev) { - struct at91_usbh_data *pdata = pdev->dev.platform_data; + struct at91_usbh_data *pdata; int i; + i = ohci_at91_of_init(pdev); + + if (i) + return i; + + pdata = pdev->dev.platform_data; + if (pdata) { for (i = 0; i < ARRAY_SIZE(pdata->vbus_pin); i++) { if (!gpio_is_valid(pdata->vbus_pin[i])) @@ -596,5 +694,6 @@ static struct platform_driver ohci_hcd_at91_driver = { .driver = { .name = "at91_ohci", .owner = THIS_MODULE, + .of_match_table = of_match_ptr(at91_ohci_dt_ids), }, }; diff --git a/drivers/watchdog/orion_wdt.c b/drivers/watchdog/orion_wdt.c index 4ad78f86851..1368e4ca310 100644 --- a/drivers/watchdog/orion_wdt.c +++ b/drivers/watchdog/orion_wdt.c @@ -28,9 +28,9 @@ /* * Watchdog timer block registers. */ -#define TIMER_CTRL (TIMER_VIRT_BASE + 0x0000) +#define TIMER_CTRL 0x0000 #define WDT_EN 0x0010 -#define WDT_VAL (TIMER_VIRT_BASE + 0x0024) +#define WDT_VAL 0x0024 #define WDT_MAX_CYCLE_COUNT 0xffffffff #define WDT_IN_USE 0 @@ -40,6 +40,7 @@ static int nowayout = WATCHDOG_NOWAYOUT; static int heartbeat = -1; /* module parameter (seconds) */ static unsigned int wdt_max_duration; /* (seconds) */ static unsigned int wdt_tclk; +static void __iomem *wdt_reg; static unsigned long wdt_status; static DEFINE_SPINLOCK(wdt_lock); @@ -48,7 +49,7 @@ static void orion_wdt_ping(void) spin_lock(&wdt_lock); /* Reload watchdog duration */ - writel(wdt_tclk * heartbeat, WDT_VAL); + writel(wdt_tclk * heartbeat, wdt_reg + WDT_VAL); spin_unlock(&wdt_lock); } @@ -60,7 +61,7 @@ static void orion_wdt_enable(void) spin_lock(&wdt_lock); /* Set watchdog duration */ - writel(wdt_tclk * heartbeat, WDT_VAL); + writel(wdt_tclk * heartbeat, wdt_reg + WDT_VAL); /* Clear watchdog timer interrupt */ reg = readl(BRIDGE_CAUSE); @@ -68,9 +69,9 @@ static void orion_wdt_enable(void) writel(reg, BRIDGE_CAUSE); /* Enable watchdog timer */ - reg = readl(TIMER_CTRL); + reg = readl(wdt_reg + TIMER_CTRL); reg |= WDT_EN; - writel(reg, TIMER_CTRL); + writel(reg, wdt_reg + TIMER_CTRL); /* Enable reset on watchdog */ reg = readl(RSTOUTn_MASK); @@ -92,9 +93,9 @@ static void orion_wdt_disable(void) writel(reg, RSTOUTn_MASK); /* Disable watchdog timer */ - reg = readl(TIMER_CTRL); + reg = readl(wdt_reg + TIMER_CTRL); reg &= ~WDT_EN; - writel(reg, TIMER_CTRL); + writel(reg, wdt_reg + TIMER_CTRL); spin_unlock(&wdt_lock); } @@ -102,7 +103,7 @@ static void orion_wdt_disable(void) static int orion_wdt_get_timeleft(int *time_left) { spin_lock(&wdt_lock); - *time_left = readl(WDT_VAL) / wdt_tclk; + *time_left = readl(wdt_reg + WDT_VAL) / wdt_tclk; spin_unlock(&wdt_lock); return 0; } @@ -236,6 +237,7 @@ static struct miscdevice orion_wdt_miscdev = { static int __devinit orion_wdt_probe(struct platform_device *pdev) { struct orion_wdt_platform_data *pdata = pdev->dev.platform_data; + struct resource *res; int ret; if (pdata) { @@ -245,6 +247,10 @@ static int __devinit orion_wdt_probe(struct platform_device *pdev) return -ENODEV; } + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + wdt_reg = ioremap(res->start, resource_size(res)); + if (orion_wdt_miscdev.parent) return -EBUSY; orion_wdt_miscdev.parent = &pdev->dev; |