diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/power/Kconfig | 13 | ||||
| -rw-r--r-- | drivers/power/Makefile | 2 | ||||
| -rw-r--r-- | drivers/power/intel_mid_battery.c | 799 | ||||
| -rw-r--r-- | drivers/power/olpc_battery.c | 2 | ||||
| -rw-r--r-- | drivers/power/s3c_adc_battery.c | 431 |
5 files changed, 1246 insertions, 1 deletions
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index 1e5506be39b..07343568a12 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -136,6 +136,12 @@ config BATTERY_Z2 help Say Y to include support for the battery on the Zipit Z2. +config BATTERY_S3C_ADC + tristate "Battery driver for Samsung ADC based monitoring" + depends on S3C_ADC + help + Say Y here to enable support for iPAQ h1930/h1940/rx1950 battery + config CHARGER_PCF50633 tristate "NXP PCF50633 MBC" depends on MFD_PCF50633 @@ -153,4 +159,11 @@ config BATTERY_JZ4740 This driver can be build as a module. If so, the module will be called jz4740-battery. +config BATTERY_INTEL_MID + tristate "Battery driver for Intel MID platforms" + depends on INTEL_SCU_IPC && SPI + help + Say Y here to enable the battery driver on Intel MID + platforms. + endif # POWER_SUPPLY diff --git a/drivers/power/Makefile b/drivers/power/Makefile index cf95009d9bc..10143aaf4ee 100644 --- a/drivers/power/Makefile +++ b/drivers/power/Makefile @@ -33,5 +33,7 @@ obj-$(CONFIG_BATTERY_BQ27x00) += bq27x00_battery.o obj-$(CONFIG_BATTERY_DA9030) += da9030_battery.o obj-$(CONFIG_BATTERY_MAX17040) += max17040_battery.o obj-$(CONFIG_BATTERY_Z2) += z2_battery.o +obj-$(CONFIG_BATTERY_S3C_ADC) += s3c_adc_battery.o obj-$(CONFIG_CHARGER_PCF50633) += pcf50633-charger.o obj-$(CONFIG_BATTERY_JZ4740) += jz4740-battery.o +obj-$(CONFIG_BATTERY_INTEL_MID) += intel_mid_battery.o diff --git a/drivers/power/intel_mid_battery.c b/drivers/power/intel_mid_battery.c new file mode 100644 index 00000000000..c61ffec2ff1 --- /dev/null +++ b/drivers/power/intel_mid_battery.c @@ -0,0 +1,799 @@ +/* + * intel_mid_battery.c - Intel MID PMIC Battery Driver + * + * Copyright (C) 2009 Intel Corporation + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * Author: Nithish Mahalingam <nithish.mahalingam@intel.com> + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/err.h> +#include <linux/interrupt.h> +#include <linux/workqueue.h> +#include <linux/jiffies.h> +#include <linux/param.h> +#include <linux/device.h> +#include <linux/spi/spi.h> +#include <linux/platform_device.h> +#include <linux/power_supply.h> + +#include <asm/intel_scu_ipc.h> + +#define DRIVER_NAME "pmic_battery" + +/********************************************************************* + * Generic defines + *********************************************************************/ + +static int debug; +module_param(debug, int, 0444); +MODULE_PARM_DESC(debug, "Flag to enable PMIC Battery debug messages."); + +#define PMIC_BATT_DRV_INFO_UPDATED 1 +#define PMIC_BATT_PRESENT 1 +#define PMIC_BATT_NOT_PRESENT 0 +#define PMIC_USB_PRESENT PMIC_BATT_PRESENT +#define PMIC_USB_NOT_PRESENT PMIC_BATT_NOT_PRESENT + +/* pmic battery register related */ +#define PMIC_BATT_CHR_SCHRGINT_ADDR 0xD2 +#define PMIC_BATT_CHR_SBATOVP_MASK (1 << 1) +#define PMIC_BATT_CHR_STEMP_MASK (1 << 2) +#define PMIC_BATT_CHR_SCOMP_MASK (1 << 3) +#define PMIC_BATT_CHR_SUSBDET_MASK (1 << 4) +#define PMIC_BATT_CHR_SBATDET_MASK (1 << 5) +#define PMIC_BATT_CHR_SDCLMT_MASK (1 << 6) +#define PMIC_BATT_CHR_SUSBOVP_MASK (1 << 7) +#define PMIC_BATT_CHR_EXCPT_MASK 0xC6 +#define PMIC_BATT_ADC_ACCCHRG_MASK (1 << 31) +#define PMIC_BATT_ADC_ACCCHRGVAL_MASK 0x7FFFFFFF + +/* pmic ipc related */ +#define PMIC_BATT_CHR_IPC_FCHRG_SUBID 0x4 +#define PMIC_BATT_CHR_IPC_TCHRG_SUBID 0x6 + +/* types of battery charging */ +enum batt_charge_type { + BATT_USBOTG_500MA_CHARGE, + BATT_USBOTG_TRICKLE_CHARGE, +}; + +/* valid battery events */ +enum batt_event { + BATT_EVENT_BATOVP_EXCPT, + BATT_EVENT_USBOVP_EXCPT, + BATT_EVENT_TEMP_EXCPT, + BATT_EVENT_DCLMT_EXCPT, + BATT_EVENT_EXCPT +}; + + +/********************************************************************* + * Battery properties + *********************************************************************/ + +/* + * pmic battery info + */ +struct pmic_power_module_info { + bool is_dev_info_updated; + struct device *dev; + /* pmic battery data */ + unsigned long update_time; /* jiffies when data read */ + unsigned int usb_is_present; + unsigned int batt_is_present; + unsigned int batt_health; + unsigned int usb_health; + unsigned int batt_status; + unsigned int batt_charge_now; /* in mAS */ + unsigned int batt_prev_charge_full; /* in mAS */ + unsigned int batt_charge_rate; /* in units per second */ + + struct power_supply usb; + struct power_supply batt; + int irq; /* GPE_ID or IRQ# */ + struct workqueue_struct *monitor_wqueue; + struct delayed_work monitor_battery; + struct work_struct handler; +}; + +static unsigned int delay_time = 2000; /* in ms */ + +/* + * pmic ac properties + */ +static enum power_supply_property pmic_usb_props[] = { + POWER_SUPPLY_PROP_PRESENT, + POWER_SUPPLY_PROP_HEALTH, +}; + +/* + * pmic battery properties + */ +static enum power_supply_property pmic_battery_props[] = { + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_HEALTH, + POWER_SUPPLY_PROP_PRESENT, + POWER_SUPPLY_PROP_CHARGE_NOW, + POWER_SUPPLY_PROP_CHARGE_FULL, +}; + + +/* + * Glue functions for talking to the IPC + */ + +struct battery_property { + u32 capacity; /* Charger capacity */ + u8 crnt; /* Quick charge current value*/ + u8 volt; /* Fine adjustment of constant charge voltage */ + u8 prot; /* CHRGPROT register value */ + u8 prot2; /* CHRGPROT1 register value */ + u8 timer; /* Charging timer */ +}; + +#define IPCMSG_BATTERY 0xEF + +/* Battery coulomb counter accumulator commands */ +#define IPC_CMD_CC_WR 0 /* Update coulomb counter value */ +#define IPC_CMD_CC_RD 1 /* Read coulomb counter value */ +#define IPC_CMD_BATTERY_PROPERTY 2 /* Read Battery property */ + +/** + * pmic_scu_ipc_battery_cc_read - read battery cc + * @value: battery coulomb counter read + * + * Reads the battery couloumb counter value, returns 0 on success, or + * an error code + * + * This function may sleep. Locking for SCU accesses is handled for + * the caller. + */ +static int pmic_scu_ipc_battery_cc_read(u32 *value) +{ + return intel_scu_ipc_command(IPCMSG_BATTERY, IPC_CMD_CC_RD, + NULL, 0, value, 1); +} + +/** + * pmic_scu_ipc_battery_property_get - fetch properties + * @prop: battery properties + * + * Retrieve the battery properties from the power management + * + * This function may sleep. Locking for SCU accesses is handled for + * the caller. + */ +static int pmic_scu_ipc_battery_property_get(struct battery_property *prop) +{ + u32 data[3]; + u8 *p = (u8 *)&data[1]; + int err = intel_scu_ipc_command(IPC_CMD_BATTERY_PROPERTY, + IPCMSG_BATTERY, NULL, 0, data, 3); + + prop->capacity = data[0]; + prop->crnt = *p++; + prop->volt = *p++; + prop->prot = *p++; + prop->prot2 = *p++; + prop->timer = *p++; + + return err; +} + +/** + * pmic_scu_ipc_set_charger - set charger + * @charger: charger to select + * + * Switch the charging mode for the SCU + */ + +static int pmic_scu_ipc_set_charger(int charger) +{ + return intel_scu_ipc_simple_command(charger, IPCMSG_BATTERY); +} + +/** + * pmic_battery_log_event - log battery events + * @event: battery event to be logged + * Context: can sleep + * + * There are multiple battery events which may be of interest to users; + * this battery function logs the different battery events onto the + * kernel log messages. + */ +static void pmic_battery_log_event(enum batt_event event) +{ + printk(KERN_WARNING "pmic-battery: "); + switch (event) { + case BATT_EVENT_BATOVP_EXCPT: + printk(KERN_CONT "battery overvoltage condition\n"); + break; + case BATT_EVENT_USBOVP_EXCPT: + printk(KERN_CONT "usb charger overvoltage condition\n"); + break; + case BATT_EVENT_TEMP_EXCPT: + printk(KERN_CONT "high battery temperature condition\n"); + break; + case BATT_EVENT_DCLMT_EXCPT: + printk(KERN_CONT "over battery charge current condition\n"); + break; + default: + printk(KERN_CONT "charger/battery exception %d\n", event); + break; + } +} + +/** + * pmic_battery_read_status - read battery status information + * @pbi: device info structure to update the read information + * Context: can sleep + * + * PMIC power source information need to be updated based on the data read + * from the PMIC battery registers. + * + */ +static void pmic_battery_read_status(struct pmic_power_module_info *pbi) +{ + unsigned int update_time_intrvl; + unsigned int chrg_val; + u32 ccval; + u8 r8; + struct battery_property batt_prop; + int batt_present = 0; + int usb_present = 0; + int batt_exception = 0; + + /* make sure the last batt_status read happened delay_time before */ + if (pbi->update_time && time_before(jiffies, pbi->update_time + + msecs_to_jiffies(delay_time))) + return; + + update_time_intrvl = jiffies_to_msecs(jiffies - pbi->update_time); + pbi->update_time = jiffies; + + /* read coulomb counter registers and schrgint register */ + if (pmic_scu_ipc_battery_cc_read(&ccval)) { + dev_warn(pbi->dev, "%s(): ipc config cmd failed\n", + __func__); + return; + } + + if (intel_scu_ipc_ioread8(PMIC_BATT_CHR_SCHRGINT_ADDR, &r8)) { + dev_warn(pbi->dev, "%s(): ipc pmic read failed\n", + __func__); + return; + } + + /* + * set pmic_power_module_info members based on pmic register values + * read. + */ + + /* set batt_is_present */ + if (r8 & PMIC_BATT_CHR_SBATDET_MASK) { + pbi->batt_is_present = PMIC_BATT_PRESENT; + batt_present = 1; + } else { + pbi->batt_is_present = PMIC_BATT_NOT_PRESENT; + pbi->batt_health = POWER_SUPPLY_HEALTH_UNKNOWN; + pbi->batt_status = POWER_SUPPLY_STATUS_UNKNOWN; + } + + /* set batt_health */ + if (batt_present) { + if (r8 & PMIC_BATT_CHR_SBATOVP_MASK) { + pbi->batt_health = POWER_SUPPLY_HEALTH_OVERVOLTAGE; + pbi->batt_status = POWER_SUPPLY_STATUS_NOT_CHARGING; + pmic_battery_log_event(BATT_EVENT_BATOVP_EXCPT); + batt_exception = 1; + } else if (r8 & PMIC_BATT_CHR_SDCLMT_MASK) { + pbi->batt_health = POWER_SUPPLY_HEALTH_OVERVOLTAGE; + pbi->batt_status = POWER_SUPPLY_STATUS_NOT_CHARGING; + pmic_battery_log_event(BATT_EVENT_DCLMT_EXCPT); + batt_exception = 1; + } else if (r8 & PMIC_BATT_CHR_STEMP_MASK) { + pbi->batt_health = POWER_SUPPLY_HEALTH_OVERHEAT; + pbi->batt_status = POWER_SUPPLY_STATUS_NOT_CHARGING; + pmic_battery_log_event(BATT_EVENT_TEMP_EXCPT); + batt_exception = 1; + } else { + pbi->batt_health = POWER_SUPPLY_HEALTH_GOOD; + } + } + + /* set usb_is_present */ + if (r8 & PMIC_BATT_CHR_SUSBDET_MASK) { + pbi->usb_is_present = PMIC_USB_PRESENT; + usb_present = 1; + } else { + pbi->usb_is_present = PMIC_USB_NOT_PRESENT; + pbi->usb_health = POWER_SUPPLY_HEALTH_UNKNOWN; + } + + if (usb_present) { + if (r8 & PMIC_BATT_CHR_SUSBOVP_MASK) { + pbi->usb_health = POWER_SUPPLY_HEALTH_OVERVOLTAGE; + pmic_battery_log_event(BATT_EVENT_USBOVP_EXCPT); + } else { + pbi->usb_health = POWER_SUPPLY_HEALTH_GOOD; + } + } + + chrg_val = ccval & PMIC_BATT_ADC_ACCCHRGVAL_MASK; + + /* set batt_prev_charge_full to battery capacity the first time */ + if (!pbi->is_dev_info_updated) { + if (pmic_scu_ipc_battery_property_get(&batt_prop)) { + dev_warn(pbi->dev, "%s(): ipc config cmd failed\n", + __func__); + return; + } + pbi->batt_prev_charge_full = batt_prop.capacity; + } + + /* set batt_status */ + if (batt_present && !batt_exception) { + if (r8 & PMIC_BATT_CHR_SCOMP_MASK) { + pbi->batt_status = POWER_SUPPLY_STATUS_FULL; + pbi->batt_prev_charge_full = chrg_val; + } else if (ccval & PMIC_BATT_ADC_ACCCHRG_MASK) { + pbi->batt_status = POWER_SUPPLY_STATUS_DISCHARGING; + } else { + pbi->batt_status = POWER_SUPPLY_STATUS_CHARGING; + } + } + + /* set batt_charge_rate */ + if (pbi->is_dev_info_updated && batt_present && !batt_exception) { + if (pbi->batt_status == POWER_SUPPLY_STATUS_DISCHARGING) { + if (pbi->batt_charge_now - chrg_val) { + pbi->batt_charge_rate = ((pbi->batt_charge_now - + chrg_val) * 1000 * 60) / + update_time_intrvl; + } + } else if (pbi->batt_status == POWER_SUPPLY_STATUS_CHARGING) { + if (chrg_val - pbi->batt_charge_now) { + pbi->batt_charge_rate = ((chrg_val - + pbi->batt_charge_now) * 1000 * 60) / + update_time_intrvl; + } + } else + pbi->batt_charge_rate = 0; + } else { + pbi->batt_charge_rate = -1; + } + + /* batt_charge_now */ + if (batt_present && !batt_exception) + pbi->batt_charge_now = chrg_val; + else + pbi->batt_charge_now = -1; + + pbi->is_dev_info_updated = PMIC_BATT_DRV_INFO_UPDATED; +} + +/** + * pmic_usb_get_property - usb power source get property + * @psy: usb power supply context + * @psp: usb power source property + * @val: usb power source property value + * Context: can sleep + * + * PMIC usb power source property needs to be provided to power_supply + * subsytem for it to provide the information to users. + */ +static int pmic_usb_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct pmic_power_module_info *pbi = container_of(psy, + struct pmic_power_module_info, usb); + + /* update pmic_power_module_info members */ + pmic_battery_read_status(pbi); + + switch (psp) { + case POWER_SUPPLY_PROP_PRESENT: + val->intval = pbi->usb_is_present; + break; + case POWER_SUPPLY_PROP_HEALTH: + val->intval = pbi->usb_health; + break; + default: + return -EINVAL; + } + + return 0; +} + +static inline unsigned long mAStouAh(unsigned long v) +{ + /* seconds to hours, mA to µA */ + return (v * 1000) / 3600; +} + +/** + * pmic_battery_get_property - battery power source get property + * @psy: battery power supply context + * @psp: battery power source property + * @val: battery power source property value + * Context: can sleep + * + * PMIC battery power source property needs to be provided to power_supply + * subsytem for it to provide the information to users. + */ +static int pmic_battery_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct pmic_power_module_info *pbi = container_of(psy, + struct pmic_power_module_info, batt); + + /* update pmic_power_module_info members */ + pmic_battery_read_status(pbi); + + switch (psp) { + case POWER_SUPPLY_PROP_STATUS: + val->intval = pbi->batt_status; + break; + case POWER_SUPPLY_PROP_HEALTH: + val->intval = pbi->batt_health; + break; + case POWER_SUPPLY_PROP_PRESENT: + val->intval = pbi->batt_is_present; + break; + case POWER_SUPPLY_PROP_CHARGE_NOW: + val->intval = mAStouAh(pbi->batt_charge_now); + break; + case POWER_SUPPLY_PROP_CHARGE_FULL: + val->intval = mAStouAh(pbi->batt_prev_charge_full); + break; + default: + return -EINVAL; + } + + return 0; +} + +/** + * pmic_battery_monitor - monitor battery status + * @work: work structure + * Context: can sleep + * + * PMIC battery status needs to be monitored for any change + * and information needs to be frequently updated. + */ +static void pmic_battery_monitor(struct work_struct *work) +{ + struct pmic_power_module_info *pbi = container_of(work, + struct pmic_power_module_info, monitor_battery.work); + + /* update pmic_power_module_info members */ + pmic_battery_read_status(pbi); + queue_delayed_work(pbi->monitor_wqueue, &pbi->monitor_battery, HZ * 10); +} + +/** + * pmic_battery_set_charger - set battery charger + * @pbi: device info structure + * @chrg: charge mode to set battery charger in + * Context: can sleep + * + * PMIC battery charger needs to be enabled based on the usb charge + * capabilities connected to the platform. + */ +static int pmic_battery_set_charger(struct pmic_power_module_info *pbi, + enum batt_charge_type chrg) +{ + int retval; + + /* set usblmt bits and chrgcntl register bits appropriately */ + switch (chrg) { + case BATT_USBOTG_500MA_CHARGE: + retval = pmic_scu_ipc_set_charger(PMIC_BATT_CHR_IPC_FCHRG_SUBID); + break; + case BATT_USBOTG_TRICKLE_CHARGE: + retval = pmic_scu_ipc_set_charger(PMIC_BATT_CHR_IPC_TCHRG_SUBID); + break; + default: + dev_warn(pbi->dev, "%s(): out of range usb charger " + "charge detected\n", __func__); + return -EINVAL; + } + + if (retval) { + dev_warn(pbi->dev, "%s(): ipc pmic read failed\n", + __func__); + return retval;; + } + + return 0; +} + +/** + * pmic_battery_interrupt_handler - pmic battery interrupt handler + * Context: interrupt context + * + * PMIC battery interrupt handler which will be called with either + * battery full condition occurs or usb otg & battery connect + * condition occurs. + */ +static irqreturn_t pmic_battery_interrupt_handler(int id, void *dev) +{ + struct pmic_power_module_info *pbi = dev; + + schedule_work(&pbi->handler); + + return IRQ_HANDLED; +} + +/** + * pmic_battery_handle_intrpt - pmic battery service interrupt + * @work: work structure + * Context: can sleep + * + * PMIC battery needs to either update the battery status as full + * if it detects battery full condition caused the interrupt or needs + * to enable battery charger if it detects usb and battery detect + * caused the source of interrupt. + */ +static void pmic_battery_handle_intrpt(struct work_struct *work) +{ + struct pmic_power_module_info *pbi = container_of(work, + struct pmic_power_module_info, handler); + enum batt_charge_type chrg; + u8 r8; + + if (intel_scu_ipc_ioread8(PMIC_BATT_CHR_SCHRGINT_ADDR, &r8)) { + dev_warn(pbi->dev, "%s(): ipc pmic read failed\n", + __func__); + return; + } + /* find the cause of the interrupt */ + if (r8 & PMIC_BATT_CHR_SBATDET_MASK) { + pbi->batt_is_present = PMIC_BATT_PRESENT; + } else { + pbi->batt_is_present = PMIC_BATT_NOT_PRESENT; + pbi->batt_health = POWER_SUPPLY_HEALTH_UNKNOWN; + pbi->batt_status = POWER_SUPPLY_STATUS_UNKNOWN; + return; + } + + if (r8 & PMIC_BATT_CHR_EXCPT_MASK) { + pbi->batt_health = POWER_SUPPLY_HEALTH_UNKNOWN; + pbi->batt_status = POWER_SUPPLY_STATUS_NOT_CHARGING; + pbi->usb_health = POWER_SUPPLY_HEALTH_UNKNOWN; + pmic_battery_log_event(BATT_EVENT_EXCPT); + return; + } else { + pbi->batt_health = POWER_SUPPLY_HEALTH_GOOD; + pbi->usb_health = POWER_SUPPLY_HEALTH_GOOD; + } + + if (r8 & PMIC_BATT_CHR_SCOMP_MASK) { + u32 ccval; + pbi->batt_status = POWER_SUPPLY_STATUS_FULL; + + if (pmic_scu_ipc_battery_cc_read(&ccval)) { + dev_warn(pbi->dev, "%s(): ipc config cmd " + "failed\n", __func__); + return; + } + pbi->batt_prev_charge_full = ccval & + PMIC_BATT_ADC_ACCCHRGVAL_MASK; + return; + } + + if (r8 & PMIC_BATT_CHR_SUSBDET_MASK) { + pbi->usb_is_present = PMIC_USB_PRESENT; + } else { + pbi->usb_is_present = PMIC_USB_NOT_PRESENT; + pbi->usb_health = POWER_SUPPLY_HEALTH_UNKNOWN; + return; + } + + /* setup battery charging */ + +#if 0 + /* check usb otg power capability and set charger accordingly */ + retval = langwell_udc_maxpower(&power); + if (retval) { + dev_warn(pbi->dev, + "%s(): usb otg power query failed with error code %d\n", + __func__, retval); + return; + } + + if (power >= 500) + chrg = BATT_USBOTG_500MA_CHARGE; + else +#endif + chrg = BATT_USBOTG_TRICKLE_CHARGE; + + /* enable battery charging */ + if (pmic_battery_set_charger(pbi, chrg)) { + dev_warn(pbi->dev, + "%s(): failed to set up battery charging\n", __func__); + return; + } + + dev_dbg(pbi->dev, + "pmic-battery: %s() - setting up battery charger successful\n", + __func__); +} + +/** + * pmic_battery_probe - pmic battery initialize + * @irq: pmic battery device irq + * @dev: pmic battery device structure + * Context: can sleep + * + * PMIC battery initializes its internal data structue and other + * infrastructure components for it to work as expected. + */ +static __devinit int probe(int irq, struct device *dev) +{ + int retval = 0; + struct pmic_power_module_info *pbi; + + dev_dbg(dev, "pmic-battery: found pmic battery device\n"); + + pbi = kzalloc(sizeof(*pbi), GFP_KERNEL); + if (!pbi) { + dev_err(dev, "%s(): memory allocation failed\n", + __func__); + return -ENOMEM; + } + + pbi->dev = dev; + pbi->irq = irq; + dev_set_drvdata(dev, pbi); + + /* initialize all required framework before enabling interrupts */ + INIT_WORK(&pbi->handler, pmic_battery_handle_intrpt); + INIT_DELAYED_WORK(&pbi->monitor_battery, pmic_battery_monitor); + pbi->monitor_wqueue = + create_singlethread_workqueue(dev_name(dev)); + if (!pbi->monitor_wqueue) { + dev_err(dev, "%s(): wqueue init failed\n", __func__); + retval = -ESRCH; + goto wqueue_failed; + } + + /* register interrupt */ + retval = request_irq(pbi->irq, pmic_battery_interrupt_handler, + 0, DRIVER_NAME, pbi); + if (retval) { + dev_err(dev, "%s(): cannot get IRQ\n", __func__); + goto requestirq_failed; + } + + /* register pmic-batt with power supply subsystem */ + pbi->batt.name = "pmic-batt"; + pbi->batt.type = POWER_SUPPLY_TYPE_BATTERY; + pbi->batt.properties = pmic_battery_props; + pbi->batt.num_properties = ARRAY_SIZE(pmic_battery_props); + pbi->batt.get_property = pmic_battery_get_property; + retval = power_supply_register(dev, &pbi->batt); + if (retval) { + dev_err(dev, + "%s(): failed to register pmic battery device with power supply subsystem\n", + __func__); + goto power_reg_failed; + } + + dev_dbg(dev, "pmic-battery: %s() - pmic battery device " + "registration with power supply subsystem successful\n", + __func__); + + queue_delayed_work(pbi->monitor_wqueue, &pbi->monitor_battery, HZ * 1); + + /* register pmic-usb with power supply subsystem */ + pbi->usb.name = "pmic-usb"; + pbi->usb.type = POWER_SUPPLY_TYPE_USB; + pbi->usb.properties = pmic_usb_props; + pbi->usb.num_properties = ARRAY_SIZE(pmic_usb_props); + pbi->usb.get_property = pmic_usb_get_property; + retval = power_supply_register(dev, &pbi->usb); + if (retval) { + dev_err(dev, + "%s(): failed to register pmic usb device with power supply subsystem\n", + __func__); + goto power_reg_failed_1; + } + + if (debug) + printk(KERN_INFO "pmic-battery: %s() - pmic usb device " + "registration with power supply subsystem successful\n", + __func__); + + return retval; + +power_reg_failed_1: + power_supply_unregister(&pbi->batt); +power_reg_failed: + cancel_rearming_delayed_workqueue(pbi->monitor_wqueue, + &pbi->monitor_battery); +requestirq_failed: + destroy_workqueue(pbi->monitor_wqueue); +wqueue_failed: + kfree(pbi); + + return retval; +} + +static int __devinit platform_pmic_battery_probe(struct platform_device *pdev) +{ + return probe(pdev->id, &pdev->dev); +} + +/** + * pmic_battery_remove - pmic battery finalize + * @dev: pmic battery device structure + * Context: can sleep + * + * PMIC battery finalizes its internal data structue and other + * infrastructure components that it initialized in + * pmic_battery_probe. + */ + +static int __devexit platform_pmic_battery_remove(struct platform_device *pdev) +{ + struct pmic_power_module_info *pbi = dev_get_drvdata(&pdev->dev); + + free_irq(pbi->irq, pbi); + cancel_rearming_delayed_workqueue(pbi->monitor_wqueue, + &pbi->monitor_battery); + destroy_workqueue(pbi->monitor_wqueue); + + power_supply_unregister(&pbi->usb); + power_supply_unregister(&pbi->batt); + + flush_scheduled_work(); + kfree(pbi); + return 0; +} + +static struct platform_driver platform_pmic_battery_driver = { + .driver = { + .name = DRIVER_NAME, + .owner = THIS_MODULE, + }, + .probe = platform_pmic_battery_probe, + .remove = __devexit_p(platform_pmic_battery_remove), +}; + +static int __init platform_pmic_battery_module_init(void) +{ + return platform_driver_register(&platform_pmic_battery_driver); +} + +static void __exit platform_pmic_battery_module_exit(void) +{ + platform_driver_unregister(&platform_pmic_battery_driver); +} + +module_init(platform_pmic_battery_module_init); +module_exit(platform_pmic_battery_module_exit); + +MODULE_AUTHOR("Nithish Mahalingam <nithish.mahalingam@intel.com>"); +MODULE_DESCRIPTION("Intel Moorestown PMIC Battery Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/power/olpc_battery.c b/drivers/power/olpc_battery.c index 5ab9109b69e..aafc1c506ed 100644 --- a/drivers/power/olpc_battery.c +++ b/drivers/power/olpc_battery.c @@ -1,7 +1,7 @@ /* * Battery driver for One Laptop Per Child board. * - * Copyright © 2006 David Woodhouse <dwmw2@infradead.org> + * Copyright © 2006-2010 David Woodhouse <dwmw2@infradead.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/drivers/power/s3c_adc_battery.c b/drivers/power/s3c_adc_battery.c new file mode 100644 index 00000000000..fe16b482e91 --- /dev/null +++ b/drivers/power/s3c_adc_battery.c @@ -0,0 +1,431 @@ +/* + * iPAQ h1930/h1940/rx1950 battery controler driver + * Copyright (c) Vasily Khoruzhick + * Based on h1940_battery.c by Arnaud Patard + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive for + * more details. + * + */ + +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/power_supply.h> +#include <linux/leds.h> +#include <linux/gpio.h> +#include <linux/err.h> +#include <linux/timer.h> +#include <linux/jiffies.h> +#include <linux/s3c_adc_battery.h> +#include <linux/errno.h> +#include <linux/init.h> + +#include <plat/adc.h> + +#define BAT_POLL_INTERVAL 10000 /* ms */ +#define JITTER_DELAY 500 /* ms */ + +struct s3c_adc_bat { + struct power_supply psy; + struct s3c_adc_client *client; + struct s3c_adc_bat_pdata *pdata; + int volt_value; + int cur_value; + unsigned int timestamp; + int level; + int status; + int cable_plugged:1; +}; + +static struct delayed_work bat_work; + +static void s3c_adc_bat_ext_power_changed(struct power_supply *psy) +{ + schedule_delayed_work(&bat_work, + msecs_to_jiffies(JITTER_DELAY)); +} + +static enum power_supply_property s3c_adc_backup_bat_props[] = { + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_VOLTAGE_MIN, + POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN, +}; + +static int s3c_adc_backup_bat_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct s3c_adc_bat *bat = container_of(psy, struct s3c_adc_bat, psy); + + if (!bat) { + dev_err(psy->dev, "%s: no battery infos ?!\n", __func__); + return -EINVAL; + } + + if (bat->volt_value < 0 || + jiffies_to_msecs(jiffies - bat->timestamp) > + BAT_POLL_INTERVAL) { + bat->volt_value = s3c_adc_read(bat->client, + bat->pdata->backup_volt_channel); + bat->volt_value *= bat->pdata->backup_volt_mult; + bat->timestamp = jiffies; + } + + switch (psp) { + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + val->intval = bat->volt_value; + return 0; + case POWER_SUPPLY_PROP_VOLTAGE_MIN: + val->intval = bat->pdata->backup_volt_min; + return 0; + case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN: + val->intval = bat->pdata->backup_volt_max; + return 0; + default: + return -EINVAL; + } +} + +static struct s3c_adc_bat backup_bat = { + .psy = { + .name = "backup-battery", + .type = POWER_SUPPLY_TYPE_BATTERY, + .properties = s3c_adc_backup_bat_props, + .num_properties = ARRAY_SIZE(s3c_adc_backup_bat_props), + .get_property = s3c_adc_backup_bat_get_property, + .use_for_apm = 1, + }, +}; + +static enum power_supply_property s3c_adc_main_bat_props[] = { + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, + POWER_SUPPLY_PROP_CHARGE_EMPTY_DESIGN, + POWER_SUPPLY_PROP_CHARGE_NOW, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_CURRENT_NOW, +}; + +static int calc_full_volt(int volt_val, int cur_val, int impedance) +{ + return volt_val + cur_val * impedance / 1000; +} + +static int s3c_adc_bat_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct s3c_adc_bat *bat = container_of(psy, struct s3c_adc_bat, psy); + + int new_level; + int full_volt; + const struct s3c_adc_bat_thresh *lut = bat->pdata->lut_noac; + unsigned int lut_size = bat->pdata->lut_noac_cnt; + + if (!bat) { + dev_err(psy->dev, "no battery infos ?!\n"); + return -EINVAL; + } + + if (bat->volt_value < 0 || bat->cur_value < 0 || + jiffies_to_msecs(jiffies - bat->timestamp) > + BAT_POLL_INTERVAL) { + bat->volt_value = s3c_adc_read(bat->client, + bat->pdata->volt_channel) * bat->pdata->volt_mult; + bat->cur_value = s3c_adc_read(bat->client, + bat->pdata->current_channel) * bat->pdata->current_mult; + bat->timestamp = jiffies; + } + + if (bat->cable_plugged && + ((bat->pdata->gpio_charge_finished < 0) || + !gpio_get_value(bat->pdata->gpio_charge_finished))) { + lut = bat->pdata->lut_acin; + lut_size = bat->pdata->lut_acin_cnt; + } + + new_level = 100000; + full_volt = calc_full_volt((bat->volt_value / 1000), + (bat->cur_value / 1000), bat->pdata->internal_impedance); + + if (full_volt < calc_full_volt(lut->volt, lut->cur, + bat->pdata->internal_impedance)) { + lut_size--; + while (lut_size--) { + int lut_volt1; + int lut_volt2; + + lut_volt1 = calc_full_volt(lut[0].volt, lut[0].cur, + bat->pdata->internal_impedance); + lut_volt2 = calc_full_volt(lut[1].volt, lut[1].cur, + bat->pdata->internal_impedance); + if (full_volt < lut_volt1 && full_volt >= lut_volt2) { + new_level = (lut[1].level + + (lut[0].level - lut[1].level) * + (full_volt - lut_volt2) / + (lut_volt1 - lut_volt2)) * 1000; + break; + } + new_level = lut[1].level * 1000; + lut++; + } + } + + bat->level = new_level; + + switch (psp) { + case POWER_SUPPLY_PROP_STATUS: + if (bat->pdata->gpio_charge_finished < 0) + val->intval = bat->level == 100000 ? + POWER_SUPPLY_STATUS_FULL : bat->status; + else + val->intval = bat->status; + return 0; + case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN: + val->intval = 100000; + return 0; + case POWER_SUPPLY_PROP_CHARGE_EMPTY_DESIGN: + val->intval = 0; + return 0; + case POWER_SUPPLY_PROP_CHARGE_NOW: + val->intval = bat->level; + return 0; + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + val->intval = bat->volt_value; + return 0; + case POWER_SUPPLY_PROP_CURRENT_NOW: + val->intval = bat->cur_value; + return 0; + default: + return -EINVAL; + } +} + +static struct s3c_adc_bat main_bat = { + .psy = { + .name = "main-battery", + .type = POWER_SUPPLY_TYPE_BATTERY, + .properties = s3c_adc_main_bat_props, + .num_properties = ARRAY_SIZE(s3c_adc_main_bat_props), + .get_property = s3c_adc_bat_get_property, + .external_power_changed = s3c_adc_bat_ext_power_changed, + .use_for_apm = 1, + }, +}; + +static void s3c_adc_bat_work(struct work_struct *work) +{ + struct s3c_adc_bat *bat = &main_bat; + int is_charged; + int is_plugged; + static int was_plugged; + + is_plugged = power_supply_am_i_supplied(&bat->psy); + bat->cable_plugged = is_plugged; + if (is_plugged != was_plugged) { + was_plugged = is_plugged; + if (is_plugged) { + if (bat->pdata->enable_charger) + bat->pdata->enable_charger(); + bat->status = POWER_SUPPLY_STATUS_CHARGING; + } else { + if (bat->pdata->disable_charger) + bat->pdata->disable_charger(); + bat->status = POWER_SUPPLY_STATUS_DISCHARGING; + } + } else { + if ((bat->pdata->gpio_charge_finished >= 0) && is_plugged) { + is_charged = gpio_get_value( + main_bat.pdata->gpio_charge_finished); + if (is_charged) { + if (bat->pdata->disable_charger) + bat->pdata->disable_charger(); + bat->status = POWER_SUPPLY_STATUS_FULL; + } else { + if (bat->pdata->enable_charger) + bat->pdata->enable_charger(); + bat->status = POWER_SUPPLY_STATUS_CHARGING; + } + } + } + + power_supply_changed(&bat->psy); +} + +static irqreturn_t s3c_adc_bat_charged(int irq, void *dev_id) +{ + schedule_delayed_work(&bat_work, + msecs_to_jiffies(JITTER_DELAY)); + return IRQ_HANDLED; +} + +static int __init s3c_adc_bat_probe(struct platform_device *pdev) +{ + struct s3c_adc_client *client; + struct s3c_adc_bat_pdata *pdata = pdev->dev.platform_data; + int ret; + + client = s3c_adc_register(pdev, NULL, NULL, 0); + if (IS_ERR(client)) { + dev_err(&pdev->dev, "cannot register adc\n"); + return PTR_ERR(client); + } + + platform_set_drvdata(pdev, client); + + main_bat.client = client; + main_bat.pdata = pdata; + main_bat.volt_value = -1; + main_bat.cur_value = -1; + main_bat.cable_plugged = 0; + main_bat.status = POWER_SUPPLY_STATUS_DISCHARGING; + + ret = power_supply_register(&pdev->dev, &main_bat.psy); + if (ret) + goto err_reg_main; + if (pdata->backup_volt_mult) { + backup_bat.client = client; + backup_bat.pdata = pdev->dev.platform_data; + backup_bat.volt_value = -1; + ret = power_supply_register(&pdev->dev, &backup_bat.psy); + if (ret) + goto err_reg_backup; + } + + INIT_DELAYED_WORK(&bat_work, s3c_adc_bat_work); + + if (pdata->gpio_charge_finished >= 0) { + ret = gpio_request(pdata->gpio_charge_finished, "charged"); + if (ret) + goto err_gpio; + + ret = request_irq(gpio_to_irq(pdata->gpio_charge_finished), + s3c_adc_bat_charged, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, + "battery charged", NULL); + if (ret) + goto err_irq; + } + + if (pdata->init) { + ret = pdata->init(); + if (ret) + goto err_platform; + } + + dev_info(&pdev->dev, "successfully loaded\n"); + device_init_wakeup(&pdev->dev, 1); + + /* Schedule timer to check current status */ + schedule_delayed_work(&bat_work, + msecs_to_jiffies(JITTER_DELAY)); + + return 0; + +err_platform: + if (pdata->gpio_charge_finished >= 0) + free_irq(gpio_to_irq(pdata->gpio_charge_finished), NULL); +err_irq: + if (pdata->gpio_charge_finished >= 0) + gpio_free(pdata->gpio_charge_finished); +err_gpio: + if (pdata->backup_volt_mult) + power_supply_unregister(&backup_bat.psy); +err_reg_backup: + power_supply_unregister(&main_bat.psy); +err_reg_main: + return ret; +} + +static int s3c_adc_bat_remove(struct platform_device *pdev) +{ + struct s3c_adc_client *client = platform_get_drvdata(pdev); + struct s3c_adc_bat_pdata *pdata = pdev->dev.platform_data; + + power_supply_unregister(&main_bat.psy); + if (pdata->backup_volt_mult) + power_supply_unregister(&backup_bat.psy); + + s3c_adc_release(client); + + if (pdata->gpio_charge_finished >= 0) { + free_irq(gpio_to_irq(pdata->gpio_charge_finished), NULL); + gpio_free(pdata->gpio_charge_finished); + } + + cancel_delayed_work(&bat_work); + + if (pdata->exit) + pdata->exit(); + + return 0; +} + +#ifdef CONFIG_PM +static int s3c_adc_bat_suspend(struct platform_device *pdev, + pm_message_t state) +{ + struct s3c_adc_bat_pdata *pdata = pdev->dev.platform_data; + + if (pdata->gpio_charge_finished >= 0) { + if (device_may_wakeup(&pdev->dev)) + enable_irq_wake( + gpio_to_irq(pdata->gpio_charge_finished)); + else { + disable_irq(gpio_to_irq(pdata->gpio_charge_finished)); + main_bat.pdata->disable_charger(); + } + } + + return 0; +} + +static int s3c_adc_bat_resume(struct platform_device *pdev) +{ + struct s3c_adc_bat_pdata *pdata = pdev->dev.platform_data; + + if (pdata->gpio_charge_finished >= 0) { + if (device_may_wakeup(&pdev->dev)) + disable_irq_wake( + gpio_to_irq(pdata->gpio_charge_finished)); + else + enable_irq(gpio_to_irq(pdata->gpio_charge_finished)); + } + + /* Schedule timer to check current status */ + schedule_delayed_work(&bat_work, + msecs_to_jiffies(JITTER_DELAY)); + + return 0; +} +#else +#define s3c_adc_battery_suspend NULL +#define s3c_adc_battery_resume NULL +#endif + +static struct platform_driver s3c_adc_bat_driver = { + .driver = { + .name = "s3c-adc-battery", + }, + .probe = s3c_adc_bat_probe, + .remove = s3c_adc_bat_remove, + .suspend = s3c_adc_bat_suspend, + .resume = s3c_adc_bat_resume, +}; + +static int __init s3c_adc_bat_init(void) +{ + return platform_driver_register(&s3c_adc_bat_driver); +} +module_init(s3c_adc_bat_init); + +static void __exit s3c_adc_bat_exit(void) +{ + platform_driver_unregister(&s3c_adc_bat_driver); +} +module_exit(s3c_adc_bat_exit); + +MODULE_AUTHOR("Vasily Khoruzhick <anarsoul@gmail.com>"); +MODULE_DESCRIPTION("iPAQ H1930/H1940/RX1950 battery controler driver"); +MODULE_LICENSE("GPL"); |