diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/net/phy/Kconfig | 14 | ||||
-rw-r--r-- | drivers/net/phy/fixed.c | 310 |
2 files changed, 169 insertions, 155 deletions
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index dd09011c7ee..432c210513b 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -76,4 +76,18 @@ config FIXED_MII_100_FDX bool "Emulation for 100M Fdx fixed PHY behavior" depends on FIXED_PHY +config FIXED_MII_1000_FDX + bool "Emulation for 1000M Fdx fixed PHY behavior" + depends on FIXED_PHY + +config FIXED_MII_AMNT + int "Number of emulated PHYs to allocate " + depends on FIXED_PHY + default "1" + ---help--- + Sometimes it is required to have several independent emulated + PHYs on the bus (in case of multi-eth but phy-less HW for instance). + This control will have specified number allocated for each fixed + PHY type enabled. + endif # PHYLIB diff --git a/drivers/net/phy/fixed.c b/drivers/net/phy/fixed.c index bb966911a13..56191822fa2 100644 --- a/drivers/net/phy/fixed.c +++ b/drivers/net/phy/fixed.c @@ -30,53 +30,31 @@ #include <linux/mii.h> #include <linux/ethtool.h> #include <linux/phy.h> +#include <linux/phy_fixed.h> #include <asm/io.h> #include <asm/irq.h> #include <asm/uaccess.h> -#define MII_REGS_NUM 7 - -/* - The idea is to emulate normal phy behavior by responding with - pre-defined values to mii BMCR read, so that read_status hook could - take all the needed info. -*/ - -struct fixed_phy_status { - u8 link; - u16 speed; - u8 duplex; -}; - -/*----------------------------------------------------------------------------- - * Private information hoder for mii_bus - *-----------------------------------------------------------------------------*/ -struct fixed_info { - u16 *regs; - u8 regs_num; - struct fixed_phy_status phy_status; - struct phy_device *phydev; /* pointer to the container */ - /* link & speed cb */ - int(*link_update)(struct net_device*, struct fixed_phy_status*); - -}; +/* we need to track the allocated pointers in order to free them on exit */ +static struct fixed_info *fixed_phy_ptrs[CONFIG_FIXED_MII_AMNT*MAX_PHY_AMNT]; /*----------------------------------------------------------------------------- * If something weird is required to be done with link/speed, * network driver is able to assign a function to implement this. * May be useful for PHY's that need to be software-driven. *-----------------------------------------------------------------------------*/ -int fixed_mdio_set_link_update(struct phy_device* phydev, - int(*link_update)(struct net_device*, struct fixed_phy_status*)) +int fixed_mdio_set_link_update(struct phy_device *phydev, + int (*link_update) (struct net_device *, + struct fixed_phy_status *)) { struct fixed_info *fixed; - if(link_update == NULL) + if (link_update == NULL) return -EINVAL; - if(phydev) { - if(phydev->bus) { + if (phydev) { + if (phydev->bus) { fixed = phydev->bus->priv; fixed->link_update = link_update; return 0; @@ -84,54 +62,64 @@ int fixed_mdio_set_link_update(struct phy_device* phydev, } return -EINVAL; } + EXPORT_SYMBOL(fixed_mdio_set_link_update); +struct fixed_info *fixed_mdio_get_phydev (int phydev_ind) +{ + if (phydev_ind >= MAX_PHY_AMNT) + return NULL; + return fixed_phy_ptrs[phydev_ind]; +} + +EXPORT_SYMBOL(fixed_mdio_get_phydev); + /*----------------------------------------------------------------------------- * This is used for updating internal mii regs from the status *-----------------------------------------------------------------------------*/ -#if defined(CONFIG_FIXED_MII_100_FDX) || defined(CONFIG_FIXED_MII_10_FDX) +#if defined(CONFIG_FIXED_MII_100_FDX) || defined(CONFIG_FIXED_MII_10_FDX) || defined(CONFIG_FIXED_MII_1000_FDX) static int fixed_mdio_update_regs(struct fixed_info *fixed) { u16 *regs = fixed->regs; u16 bmsr = 0; u16 bmcr = 0; - if(!regs) { + if (!regs) { printk(KERN_ERR "%s: regs not set up", __FUNCTION__); return -EINVAL; } - if(fixed->phy_status.link) + if (fixed->phy_status.link) bmsr |= BMSR_LSTATUS; - if(fixed->phy_status.duplex) { + if (fixed->phy_status.duplex) { bmcr |= BMCR_FULLDPLX; - switch ( fixed->phy_status.speed ) { + switch (fixed->phy_status.speed) { case 100: bmsr |= BMSR_100FULL; bmcr |= BMCR_SPEED100; - break; + break; case 10: bmsr |= BMSR_10FULL; - break; + break; } } else { - switch ( fixed->phy_status.speed ) { + switch (fixed->phy_status.speed) { case 100: bmsr |= BMSR_100HALF; bmcr |= BMCR_SPEED100; - break; + break; case 10: bmsr |= BMSR_100HALF; - break; + break; } } - regs[MII_BMCR] = bmcr; - regs[MII_BMSR] = bmsr | 0x800; /*we are always capable of 10 hdx*/ + regs[MII_BMCR] = bmcr; + regs[MII_BMSR] = bmsr | 0x800; /*we are always capable of 10 hdx */ return 0; } @@ -141,29 +129,30 @@ static int fixed_mii_read(struct mii_bus *bus, int phy_id, int location) struct fixed_info *fixed = bus->priv; /* if user has registered link update callback, use it */ - if(fixed->phydev) - if(fixed->phydev->attached_dev) { - if(fixed->link_update) { + if (fixed->phydev) + if (fixed->phydev->attached_dev) { + if (fixed->link_update) { fixed->link_update(fixed->phydev->attached_dev, - &fixed->phy_status); + &fixed->phy_status); fixed_mdio_update_regs(fixed); } - } + } if ((unsigned int)location >= fixed->regs_num) return -1; return fixed->regs[location]; } -static int fixed_mii_write(struct mii_bus *bus, int phy_id, int location, u16 val) +static int fixed_mii_write(struct mii_bus *bus, int phy_id, int location, + u16 val) { - /* do nothing for now*/ + /* do nothing for now */ return 0; } static int fixed_mii_reset(struct mii_bus *bus) { - /*nothing here - no way/need to reset it*/ + /*nothing here - no way/need to reset it */ return 0; } #endif @@ -171,8 +160,8 @@ static int fixed_mii_reset(struct mii_bus *bus) static int fixed_config_aneg(struct phy_device *phydev) { /* :TODO:03/13/2006 09:45:37 PM:: - The full autoneg funcionality can be emulated, - but no need to have anything here for now + The full autoneg funcionality can be emulated, + but no need to have anything here for now */ return 0; } @@ -182,59 +171,79 @@ static int fixed_config_aneg(struct phy_device *phydev) * match will never return true... *-----------------------------------------------------------------------------*/ static struct phy_driver fixed_mdio_driver = { - .name = "Fixed PHY", - .features = PHY_BASIC_FEATURES, - .config_aneg = fixed_config_aneg, - .read_status = genphy_read_status, - .driver = { .owner = THIS_MODULE,}, + .name = "Fixed PHY", +#ifdef CONFIG_FIXED_MII_1000_FDX + .features = PHY_GBIT_FEATURES, +#else + .features = PHY_BASIC_FEATURES, +#endif + .config_aneg = fixed_config_aneg, + .read_status = genphy_read_status, + .driver = { .owner = THIS_MODULE, }, }; +static void fixed_mdio_release(struct device *dev) +{ + struct phy_device *phydev = container_of(dev, struct phy_device, dev); + struct mii_bus *bus = phydev->bus; + struct fixed_info *fixed = bus->priv; + + kfree(phydev); + kfree(bus->dev); + kfree(bus); + kfree(fixed->regs); + kfree(fixed); +} + /*----------------------------------------------------------------------------- * This func is used to create all the necessary stuff, bind * the fixed phy driver and register all it on the mdio_bus_type. - * speed is either 10 or 100, duplex is boolean. + * speed is either 10 or 100 or 1000, duplex is boolean. * number is used to create multiple fixed PHYs, so that several devices can * utilize them simultaneously. + * + * The device on mdio bus will look like [bus_id]:[phy_id], + * bus_id = number + * phy_id = speed+duplex. *-----------------------------------------------------------------------------*/ -#if defined(CONFIG_FIXED_MII_100_FDX) || defined(CONFIG_FIXED_MII_10_FDX) -static int fixed_mdio_register_device(int number, int speed, int duplex) +#if defined(CONFIG_FIXED_MII_100_FDX) || defined(CONFIG_FIXED_MII_10_FDX) || defined(CONFIG_FIXED_MII_1000_FDX) +struct fixed_info *fixed_mdio_register_device( + int bus_id, int speed, int duplex, u8 phy_id) { struct mii_bus *new_bus; struct fixed_info *fixed; struct phy_device *phydev; - int err = 0; + int err; - struct device* dev = kzalloc(sizeof(struct device), GFP_KERNEL); + struct device *dev = kzalloc(sizeof(struct device), GFP_KERNEL); - if (NULL == dev) - return -ENOMEM; + if (dev == NULL) + goto err_dev_alloc; new_bus = kzalloc(sizeof(struct mii_bus), GFP_KERNEL); - if (NULL == new_bus) { - kfree(dev); - return -ENOMEM; - } + if (new_bus == NULL) + goto err_bus_alloc; + fixed = kzalloc(sizeof(struct fixed_info), GFP_KERNEL); - if (NULL == fixed) { - kfree(dev); - kfree(new_bus); - return -ENOMEM; - } + if (fixed == NULL) + goto err_fixed_alloc; + + fixed->regs = kzalloc(MII_REGS_NUM * sizeof(int), GFP_KERNEL); + if (NULL == fixed->regs) + goto err_fixed_regs_alloc; - fixed->regs = kzalloc(MII_REGS_NUM*sizeof(int), GFP_KERNEL); fixed->regs_num = MII_REGS_NUM; fixed->phy_status.speed = speed; fixed->phy_status.duplex = duplex; fixed->phy_status.link = 1; - new_bus->name = "Fixed MII Bus", - new_bus->read = &fixed_mii_read, - new_bus->write = &fixed_mii_write, - new_bus->reset = &fixed_mii_reset, - - /*set up workspace*/ + new_bus->name = "Fixed MII Bus"; + new_bus->read = &fixed_mii_read; + new_bus->write = &fixed_mii_write; + new_bus->reset = &fixed_mii_reset; + /*set up workspace */ fixed_mdio_update_regs(fixed); new_bus->priv = fixed; @@ -243,119 +252,110 @@ static int fixed_mdio_register_device(int number, int speed, int duplex) /* create phy_device and register it on the mdio bus */ phydev = phy_device_create(new_bus, 0, 0); + if (phydev == NULL) + goto err_phy_dev_create; /* - Put the phydev pointer into the fixed pack so that bus read/write code could - be able to access for instance attached netdev. Well it doesn't have to do - so, only in case of utilizing user-specified link-update... + * Put the phydev pointer into the fixed pack so that bus read/write + * code could be able to access for instance attached netdev. Well it + * doesn't have to do so, only in case of utilizing user-specified + * link-update... */ - fixed->phydev = phydev; - if(NULL == phydev) { - err = -ENOMEM; - goto device_create_fail; - } + fixed->phydev = phydev; + phydev->speed = speed; + phydev->duplex = duplex; phydev->irq = PHY_IGNORE_INTERRUPT; phydev->dev.bus = &mdio_bus_type; - if(number) - snprintf(phydev->dev.bus_id, BUS_ID_SIZE, - "fixed_%d@%d:%d", number, speed, duplex); - else - snprintf(phydev->dev.bus_id, BUS_ID_SIZE, - "fixed@%d:%d", speed, duplex); - phydev->bus = new_bus; + snprintf(phydev->dev.bus_id, BUS_ID_SIZE, + PHY_ID_FMT, bus_id, phy_id); - err = device_register(&phydev->dev); - if(err) { - printk(KERN_ERR "Phy %s failed to register\n", - phydev->dev.bus_id); - goto bus_register_fail; - } + phydev->bus = new_bus; - /* - the mdio bus has phy_id match... In order not to do it - artificially, we are binding the driver here by hand; - it will be the same for all the fixed phys anyway. - */ phydev->dev.driver = &fixed_mdio_driver.driver; - + phydev->dev.release = fixed_mdio_release; err = phydev->dev.driver->probe(&phydev->dev); - if(err < 0) { - printk(KERN_ERR "Phy %s: problems with fixed driver\n",phydev->dev.bus_id); - goto probe_fail; + if (err < 0) { + printk(KERN_ERR "Phy %s: problems with fixed driver\n", + phydev->dev.bus_id); + goto err_out; } + err = device_register(&phydev->dev); + if (err) { + printk(KERN_ERR "Phy %s failed to register\n", + phydev->dev.bus_id); + goto err_out; + } + //phydev->state = PHY_RUNNING; /* make phy go up quick, but in 10Mbit/HDX + return fixed; - err = device_bind_driver(&phydev->dev); - if (err) - goto probe_fail; - - return 0; - -probe_fail: - device_unregister(&phydev->dev); -bus_register_fail: +err_out: kfree(phydev); -device_create_fail: - kfree(dev); - kfree(new_bus); +err_phy_dev_create: + kfree(fixed->regs); +err_fixed_regs_alloc: kfree(fixed); +err_fixed_alloc: + kfree(new_bus); +err_bus_alloc: + kfree(dev); +err_dev_alloc: + + return NULL; - return err; } #endif - MODULE_DESCRIPTION("Fixed PHY device & driver for PAL"); MODULE_AUTHOR("Vitaly Bordug"); MODULE_LICENSE("GPL"); static int __init fixed_init(void) { -#if 0 - int ret; - int duplex = 0; -#endif - - /* register on the bus... Not expected to be matched with anything there... */ + int cnt = 0; + int i; +/* register on the bus... Not expected to be matched + * with anything there... + * + */ phy_driver_register(&fixed_mdio_driver); - /* So let the fun begin... - We will create several mdio devices here, and will bound the upper - driver to them. - - Then the external software can lookup the phy bus by searching - fixed@speed:duplex, e.g. fixed@100:1, to be connected to the - virtual 100M Fdx phy. - - In case several virtual PHYs required, the bus_id will be in form - fixed_<num>@<speed>:<duplex>, which make it able even to define - driver-specific link control callback, if for instance PHY is completely - SW-driven. - - */ - -#ifdef CONFIG_FIXED_MII_DUPLEX -#if 0 - duplex = 1; -#endif +/* We will create several mdio devices here, and will bound the upper + * driver to them. + * + * Then the external software can lookup the phy bus by searching + * for 0:101, to be connected to the virtual 100M Fdx phy. + * + * In case several virtual PHYs required, the bus_id will be in form + * [num]:[duplex]+[speed], which make it able even to define + * driver-specific link control callback, if for instance PHY is + * completely SW-driven. + */ + for (i=1; i <= CONFIG_FIXED_MII_AMNT; i++) { +#ifdef CONFIG_FIXED_MII_1000_FDX + fixed_phy_ptrs[cnt++] = fixed_mdio_register_device(0, 1000, 1, i); #endif - #ifdef CONFIG_FIXED_MII_100_FDX - fixed_mdio_register_device(0, 100, 1); + fixed_phy_ptrs[cnt++] = fixed_mdio_register_device(1, 100, 1, i); #endif - #ifdef CONFIG_FIXED_MII_10_FDX - fixed_mdio_register_device(0, 10, 1); + fixed_phy_ptrs[cnt++] = fixed_mdio_register_device(2, 10, 1, i); #endif + } + return 0; } static void __exit fixed_exit(void) { + int i; + phy_driver_unregister(&fixed_mdio_driver); - /* :WARNING:02/18/2006 04:32:40 AM:: Cleanup all the created stuff */ + for (i=0; i < MAX_PHY_AMNT; i++) + if ( fixed_phy_ptrs[i] ) + device_unregister(&fixed_phy_ptrs[i]->phydev->dev); } module_init(fixed_init); |