diff options
Diffstat (limited to 'drivers')
194 files changed, 1050 insertions, 6246 deletions
diff --git a/drivers/acpi/acpi_lpss.c b/drivers/acpi/acpi_lpss.c index ce06149088c..9dfec48dd4e 100644 --- a/drivers/acpi/acpi_lpss.c +++ b/drivers/acpi/acpi_lpss.c @@ -196,6 +196,17 @@ static struct lpss_device_desc byt_i2c_dev_desc = { .setup = lpss_i2c_setup, }; +static struct lpss_shared_clock bsw_pwm_clock = { + .name = "pwm_clk", + .rate = 19200000, +}; + +static struct lpss_device_desc bsw_pwm_dev_desc = { + .clk_required = true, + .save_ctx = true, + .shared_clock = &bsw_pwm_clock, +}; + #else #define LPSS_ADDR(desc) (0UL) @@ -225,6 +236,12 @@ static const struct acpi_device_id acpi_lpss_device_ids[] = { { "INT33B2", }, { "INT33FC", }, + /* Braswell LPSS devices */ + { "80862288", LPSS_ADDR(bsw_pwm_dev_desc) }, + { "8086228A", LPSS_ADDR(byt_uart_dev_desc) }, + { "8086228E", LPSS_ADDR(byt_spi_dev_desc) }, + { "808622C1", LPSS_ADDR(byt_i2c_dev_desc) }, + { "INT3430", LPSS_ADDR(lpt_dev_desc) }, { "INT3431", LPSS_ADDR(lpt_dev_desc) }, { "INT3432", LPSS_ADDR(lpt_i2c_dev_desc) }, diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index a66ab658abb..9922cc46b15 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -197,6 +197,8 @@ static bool advance_transaction(struct acpi_ec *ec) t->rdata[t->ri++] = acpi_ec_read_data(ec); if (t->rlen == t->ri) { t->flags |= ACPI_EC_COMMAND_COMPLETE; + if (t->command == ACPI_EC_COMMAND_QUERY) + pr_debug("hardware QR_EC completion\n"); wakeup = true; } } else @@ -208,7 +210,20 @@ static bool advance_transaction(struct acpi_ec *ec) } return wakeup; } else { - if ((status & ACPI_EC_FLAG_IBF) == 0) { + /* + * There is firmware refusing to respond QR_EC when SCI_EVT + * is not set, for which case, we complete the QR_EC + * without issuing it to the firmware. + * https://bugzilla.kernel.org/show_bug.cgi?id=86211 + */ + if (!(status & ACPI_EC_FLAG_SCI) && + (t->command == ACPI_EC_COMMAND_QUERY)) { + t->flags |= ACPI_EC_COMMAND_POLL; + t->rdata[t->ri++] = 0x00; + t->flags |= ACPI_EC_COMMAND_COMPLETE; + pr_debug("software QR_EC completion\n"); + wakeup = true; + } else if ((status & ACPI_EC_FLAG_IBF) == 0) { acpi_ec_write_cmd(ec, t->command); t->flags |= ACPI_EC_COMMAND_POLL; } else @@ -288,11 +303,11 @@ static int acpi_ec_transaction_unlocked(struct acpi_ec *ec, /* following two actions should be kept atomic */ ec->curr = t; start_transaction(ec); - if (ec->curr->command == ACPI_EC_COMMAND_QUERY) - clear_bit(EC_FLAGS_QUERY_PENDING, &ec->flags); spin_unlock_irqrestore(&ec->lock, tmp); ret = ec_poll(ec); spin_lock_irqsave(&ec->lock, tmp); + if (ec->curr->command == ACPI_EC_COMMAND_QUERY) + clear_bit(EC_FLAGS_QUERY_PENDING, &ec->flags); ec->curr = NULL; spin_unlock_irqrestore(&ec->lock, tmp); return ret; diff --git a/drivers/acpi/pci_irq.c b/drivers/acpi/pci_irq.c index c96887d5289..6e6b80eb0bb 100644 --- a/drivers/acpi/pci_irq.c +++ b/drivers/acpi/pci_irq.c @@ -484,6 +484,10 @@ void acpi_pci_irq_disable(struct pci_dev *dev) /* Keep IOAPIC pin configuration when suspending */ if (dev->dev.power.is_prepared) return; +#ifdef CONFIG_PM_RUNTIME + if (dev->dev.power.runtime_status == RPM_SUSPENDING) + return; +#endif entry = acpi_pci_irq_lookup(dev, pin); if (!entry) diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index 0a817ad24f1..9a9298994e2 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -922,12 +922,17 @@ static void acpi_device_notify(acpi_handle handle, u32 event, void *data) device->driver->ops.notify(device, event); } -static acpi_status acpi_device_notify_fixed(void *data) +static void acpi_device_notify_fixed(void *data) { struct acpi_device *device = data; /* Fixed hardware devices have no handles */ acpi_device_notify(NULL, ACPI_FIXED_HARDWARE_EVENT, device); +} + +static acpi_status acpi_device_fixed_event(void *data) +{ + acpi_os_execute(OSL_NOTIFY_HANDLER, acpi_device_notify_fixed, data); return AE_OK; } @@ -938,12 +943,12 @@ static int acpi_device_install_notify_handler(struct acpi_device *device) if (device->device_type == ACPI_BUS_TYPE_POWER_BUTTON) status = acpi_install_fixed_event_handler(ACPI_EVENT_POWER_BUTTON, - acpi_device_notify_fixed, + acpi_device_fixed_event, device); else if (device->device_type == ACPI_BUS_TYPE_SLEEP_BUTTON) status = acpi_install_fixed_event_handler(ACPI_EVENT_SLEEP_BUTTON, - acpi_device_notify_fixed, + acpi_device_fixed_event, device); else status = acpi_install_notify_handler(device->handle, @@ -960,10 +965,10 @@ static void acpi_device_remove_notify_handler(struct acpi_device *device) { if (device->device_type == ACPI_BUS_TYPE_POWER_BUTTON) acpi_remove_fixed_event_handler(ACPI_EVENT_POWER_BUTTON, - acpi_device_notify_fixed); + acpi_device_fixed_event); else if (device->device_type == ACPI_BUS_TYPE_SLEEP_BUTTON) acpi_remove_fixed_event_handler(ACPI_EVENT_SLEEP_BUTTON, - acpi_device_notify_fixed); + acpi_device_fixed_event); else acpi_remove_notify_handler(device->handle, ACPI_DEVICE_NOTIFY, acpi_device_notify); @@ -975,7 +980,7 @@ static int acpi_device_probe(struct device *dev) struct acpi_driver *acpi_drv = to_acpi_driver(dev->driver); int ret; - if (acpi_dev->handler) + if (acpi_dev->handler && !acpi_is_pnp_device(acpi_dev)) return -EINVAL; if (!acpi_drv->ops.add) diff --git a/drivers/base/regmap/internal.h b/drivers/base/regmap/internal.h index 7d1326985be..bfc90b8547f 100644 --- a/drivers/base/regmap/internal.h +++ b/drivers/base/regmap/internal.h @@ -146,6 +146,9 @@ struct regcache_ops { enum regcache_type type; int (*init)(struct regmap *map); int (*exit)(struct regmap *map); +#ifdef CONFIG_DEBUG_FS + void (*debugfs_init)(struct regmap *map); +#endif int (*read)(struct regmap *map, unsigned int reg, unsigned int *value); int (*write)(struct regmap *map, unsigned int reg, unsigned int value); int (*sync)(struct regmap *map, unsigned int min, unsigned int max); diff --git a/drivers/base/regmap/regcache-rbtree.c b/drivers/base/regmap/regcache-rbtree.c index 6a7e4fa1285..f3e8fe0cc65 100644 --- a/drivers/base/regmap/regcache-rbtree.c +++ b/drivers/base/regmap/regcache-rbtree.c @@ -194,10 +194,6 @@ static void rbtree_debugfs_init(struct regmap *map) { debugfs_create_file("rbtree", 0400, map->debugfs, map, &rbtree_fops); } -#else -static void rbtree_debugfs_init(struct regmap *map) -{ -} #endif static int regcache_rbtree_init(struct regmap *map) @@ -222,8 +218,6 @@ static int regcache_rbtree_init(struct regmap *map) goto err; } - rbtree_debugfs_init(map); - return 0; err: @@ -532,6 +526,9 @@ struct regcache_ops regcache_rbtree_ops = { .name = "rbtree", .init = regcache_rbtree_init, .exit = regcache_rbtree_exit, +#ifdef CONFIG_DEBUG_FS + .debugfs_init = rbtree_debugfs_init, +#endif .read = regcache_rbtree_read, .write = regcache_rbtree_write, .sync = regcache_rbtree_sync, diff --git a/drivers/base/regmap/regcache.c b/drivers/base/regmap/regcache.c index 29b4128da0b..5617da6dc89 100644 --- a/drivers/base/regmap/regcache.c +++ b/drivers/base/regmap/regcache.c @@ -698,7 +698,7 @@ int regcache_sync_block(struct regmap *map, void *block, unsigned int block_base, unsigned int start, unsigned int end) { - if (regmap_can_raw_write(map)) + if (regmap_can_raw_write(map) && !map->use_single_rw) return regcache_sync_block_raw(map, block, cache_present, block_base, start, end); else diff --git a/drivers/base/regmap/regmap-debugfs.c b/drivers/base/regmap/regmap-debugfs.c index 45d812c0ea7..65ea7b256b3 100644 --- a/drivers/base/regmap/regmap-debugfs.c +++ b/drivers/base/regmap/regmap-debugfs.c @@ -538,6 +538,9 @@ void regmap_debugfs_init(struct regmap *map, const char *name) next = rb_next(&range_node->node); } + + if (map->cache_ops && map->cache_ops->debugfs_init) + map->cache_ops->debugfs_init(map); } void regmap_debugfs_exit(struct regmap *map) diff --git a/drivers/base/regmap/regmap.c b/drivers/base/regmap/regmap.c index 78f43fb2fe8..1cf427bc0d4 100644 --- a/drivers/base/regmap/regmap.c +++ b/drivers/base/regmap/regmap.c @@ -109,7 +109,7 @@ bool regmap_readable(struct regmap *map, unsigned int reg) bool regmap_volatile(struct regmap *map, unsigned int reg) { - if (!regmap_readable(map, reg)) + if (!map->format.format_write && !regmap_readable(map, reg)) return false; if (map->volatile_reg) diff --git a/drivers/block/brd.c b/drivers/block/brd.c index c7d138eca73..3598110d2ce 100644 --- a/drivers/block/brd.c +++ b/drivers/block/brd.c @@ -442,12 +442,15 @@ static int rd_nr; int rd_size = CONFIG_BLK_DEV_RAM_SIZE; static int max_part; static int part_shift; +static int part_show = 0; module_param(rd_nr, int, S_IRUGO); MODULE_PARM_DESC(rd_nr, "Maximum number of brd devices"); module_param(rd_size, int, S_IRUGO); MODULE_PARM_DESC(rd_size, "Size of each RAM disk in kbytes."); module_param(max_part, int, S_IRUGO); MODULE_PARM_DESC(max_part, "Maximum number of partitions per RAM disk"); +module_param(part_show, int, S_IRUGO); +MODULE_PARM_DESC(part_show, "Control RAM disk visibility in /proc/partitions"); MODULE_LICENSE("GPL"); MODULE_ALIAS_BLOCKDEV_MAJOR(RAMDISK_MAJOR); MODULE_ALIAS("rd"); @@ -501,7 +504,8 @@ static struct brd_device *brd_alloc(int i) disk->fops = &brd_fops; disk->private_data = brd; disk->queue = brd->brd_queue; - disk->flags |= GENHD_FL_SUPPRESS_PARTITION_INFO; + if (!part_show) + disk->flags |= GENHD_FL_SUPPRESS_PARTITION_INFO; sprintf(disk->disk_name, "ram%d", i); set_capacity(disk, rd_size * 2); diff --git a/drivers/block/xsysace.c b/drivers/block/xsysace.c index ab3ea62e5df..c4328d9d998 100644 --- a/drivers/block/xsysace.c +++ b/drivers/block/xsysace.c @@ -1203,7 +1203,6 @@ static struct platform_driver ace_platform_driver = { .probe = ace_probe, .remove = ace_remove, .driver = { - .owner = THIS_MODULE, .name = "xsysace", .of_match_table = ace_of_match, }, diff --git a/drivers/block/zram/zram_drv.c b/drivers/block/zram/zram_drv.c index dfa4024c448..d00831c3d73 100644 --- a/drivers/block/zram/zram_drv.c +++ b/drivers/block/zram/zram_drv.c @@ -378,7 +378,6 @@ static int zram_decompress_page(struct zram *zram, char *mem, u32 index) /* Should NEVER happen. Return bio error if it does. */ if (unlikely(ret)) { pr_err("Decompression failed! err=%d, page=%u\n", ret, index); - atomic64_inc(&zram->stats.failed_reads); return ret; } @@ -547,8 +546,6 @@ out: zcomp_strm_release(zram->comp, zstrm); if (is_partial_io(bvec)) kfree(uncmem); - if (ret) - atomic64_inc(&zram->stats.failed_writes); return ret; } @@ -566,6 +563,13 @@ static int zram_bvec_rw(struct zram *zram, struct bio_vec *bvec, u32 index, ret = zram_bvec_write(zram, bvec, index, offset); } + if (unlikely(ret)) { + if (rw == READ) + atomic64_inc(&zram->stats.failed_reads); + else + atomic64_inc(&zram->stats.failed_writes); + } + return ret; } diff --git a/drivers/block/zram/zram_drv.h b/drivers/block/zram/zram_drv.h index 5b0afde729c..e0f725c87cc 100644 --- a/drivers/block/zram/zram_drv.h +++ b/drivers/block/zram/zram_drv.h @@ -84,7 +84,7 @@ struct zram_stats { atomic64_t compr_data_size; /* compressed size of pages stored */ atomic64_t num_reads; /* failed + successful */ atomic64_t num_writes; /* --do-- */ - atomic64_t failed_reads; /* should NEVER! happen */ + atomic64_t failed_reads; /* can happen when memory is too low */ atomic64_t failed_writes; /* can happen when memory is too low */ atomic64_t invalid_io; /* non-page-aligned I/O requests */ atomic64_t notify_free; /* no. of swap slot free notifications */ diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c index c5eac949760..e396ad3f8f3 100644 --- a/drivers/cpufreq/intel_pstate.c +++ b/drivers/cpufreq/intel_pstate.c @@ -660,6 +660,7 @@ static const struct x86_cpu_id intel_pstate_cpu_ids[] = { ICPU(0x3f, core_params), ICPU(0x45, core_params), ICPU(0x46, core_params), + ICPU(0x4c, byt_params), ICPU(0x4f, core_params), ICPU(0x56, core_params), {} @@ -688,7 +689,7 @@ static int intel_pstate_init_cpu(unsigned int cpunum) add_timer_on(&cpu->timer, cpunum); - pr_info("Intel pstate controlling: cpu %d\n", cpunum); + pr_debug("Intel pstate controlling: cpu %d\n", cpunum); return 0; } diff --git a/drivers/cpufreq/s5pv210-cpufreq.c b/drivers/cpufreq/s5pv210-cpufreq.c index 9a68225a757..3f9791f07b8 100644 --- a/drivers/cpufreq/s5pv210-cpufreq.c +++ b/drivers/cpufreq/s5pv210-cpufreq.c @@ -501,7 +501,7 @@ static int check_mem_type(void __iomem *dmc_reg) return val >> 8; } -static int __init s5pv210_cpu_init(struct cpufreq_policy *policy) +static int s5pv210_cpu_init(struct cpufreq_policy *policy) { unsigned long mem_type; int ret; diff --git a/drivers/cpuidle/cpuidle-big_little.c b/drivers/cpuidle/cpuidle-big_little.c index 344d79fa340..ef94c3b81f1 100644 --- a/drivers/cpuidle/cpuidle-big_little.c +++ b/drivers/cpuidle/cpuidle-big_little.c @@ -138,25 +138,18 @@ static int bl_enter_powerdown(struct cpuidle_device *dev, return idx; } -static int __init bl_idle_driver_init(struct cpuidle_driver *drv, int cpu_id) +static int __init bl_idle_driver_init(struct cpuidle_driver *drv, int part_id) { - struct cpuinfo_arm *cpu_info; struct cpumask *cpumask; - unsigned long cpuid; int cpu; cpumask = kzalloc(cpumask_size(), GFP_KERNEL); if (!cpumask) return -ENOMEM; - for_each_possible_cpu(cpu) { - cpu_info = &per_cpu(cpu_data, cpu); - cpuid = is_smp() ? cpu_info->cpuid : read_cpuid_id(); - - /* read cpu id part number */ - if ((cpuid & 0xFFF0) == cpu_id) + for_each_possible_cpu(cpu) + if (smp_cpuid_part(cpu) == part_id) cpumask_set_cpu(cpu, cpumask); - } drv->cpumask = cpumask; diff --git a/drivers/dma-buf/fence.c b/drivers/dma-buf/fence.c index 4222cb2aa96..7bb9d65d9a2 100644 --- a/drivers/dma-buf/fence.c +++ b/drivers/dma-buf/fence.c @@ -29,7 +29,7 @@ EXPORT_TRACEPOINT_SYMBOL(fence_annotate_wait_on); EXPORT_TRACEPOINT_SYMBOL(fence_emit); -/** +/* * fence context counter: each execution context should have its own * fence context, this allows checking if fences belong to the same * context or not. One device can have multiple separate contexts, diff --git a/drivers/gpu/drm/ast/ast_tables.h b/drivers/gpu/drm/ast/ast_tables.h index 4c761dcea97..05c01ea8529 100644 --- a/drivers/gpu/drm/ast/ast_tables.h +++ b/drivers/gpu/drm/ast/ast_tables.h @@ -99,6 +99,7 @@ static struct ast_vbios_dclk_info dclk_table[] = { {0x25, 0x65, 0x80}, /* 16: VCLK88.75 */ {0x77, 0x58, 0x80}, /* 17: VCLK119 */ {0x32, 0x67, 0x80}, /* 18: VCLK85_5 */ + {0x6a, 0x6d, 0x80}, /* 19: VCLK97_75 */ }; static struct ast_vbios_stdtable vbios_stdtable[] = { diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c index fa2be249999..90e773019ea 100644 --- a/drivers/gpu/drm/drm_crtc.c +++ b/drivers/gpu/drm/drm_crtc.c @@ -4696,8 +4696,9 @@ int drm_mode_create_dumb_ioctl(struct drm_device *dev, return -EINVAL; /* overflow checks for 32bit size calculations */ + /* NOTE: DIV_ROUND_UP() can overflow */ cpp = DIV_ROUND_UP(args->bpp, 8); - if (cpp > 0xffffffffU / args->width) + if (!cpp || cpp > 0xffffffffU / args->width) return -EINVAL; stride = cpp * args->width; if (args->height > 0xffffffffU / stride) diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c index a66955037e4..eee79e1c322 100644 --- a/drivers/gpu/drm/i915/intel_bios.c +++ b/drivers/gpu/drm/i915/intel_bios.c @@ -1123,7 +1123,7 @@ init_vbt_defaults(struct drm_i915_private *dev_priv) } } -static int __init intel_no_opregion_vbt_callback(const struct dmi_system_id *id) +static int intel_no_opregion_vbt_callback(const struct dmi_system_id *id) { DRM_DEBUG_KMS("Falling back to manually reading VBT from " "VBIOS ROM for %s\n", diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c index e8abfce4097..9212e6504e0 100644 --- a/drivers/gpu/drm/i915/intel_crt.c +++ b/drivers/gpu/drm/i915/intel_crt.c @@ -804,7 +804,7 @@ static const struct drm_encoder_funcs intel_crt_enc_funcs = { .destroy = intel_encoder_destroy, }; -static int __init intel_no_crt_dmi_callback(const struct dmi_system_id *id) +static int intel_no_crt_dmi_callback(const struct dmi_system_id *id) { DRM_INFO("Skipping CRT initialization for %s\n", id->ident); return 1; diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index d074d704f45..d8324c69fa8 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -2233,6 +2233,15 @@ intel_pin_and_fence_fb_obj(struct drm_device *dev, if (need_vtd_wa(dev) && alignment < 256 * 1024) alignment = 256 * 1024; + /* + * Global gtt pte registers are special registers which actually forward + * writes to a chunk of system memory. Which means that there is no risk + * that the register values disappear as soon as we call + * intel_runtime_pm_put(), so it is correct to wrap only the + * pin/unpin/fence and not more. + */ + intel_runtime_pm_get(dev_priv); + dev_priv->mm.interruptible = false; ret = i915_gem_object_pin_to_display_plane(obj, alignment, pipelined); if (ret) @@ -2250,12 +2259,14 @@ intel_pin_and_fence_fb_obj(struct drm_device *dev, i915_gem_object_pin_fence(obj); dev_priv->mm.interruptible = true; + intel_runtime_pm_put(dev_priv); return 0; err_unpin: i915_gem_object_unpin_from_display_plane(obj); err_interruptible: dev_priv->mm.interruptible = true; + intel_runtime_pm_put(dev_priv); return ret; } @@ -4188,10 +4199,6 @@ static void ironlake_crtc_disable(struct drm_crtc *crtc) intel_set_pch_fifo_underrun_reporting(dev, pipe, false); intel_disable_pipe(dev_priv, pipe); - - if (intel_crtc->config.dp_encoder_is_mst) - intel_ddi_set_vc_payload_alloc(crtc, false); - ironlake_pfit_disable(intel_crtc); for_each_encoder_on_crtc(dev, crtc, encoder) @@ -4256,6 +4263,9 @@ static void haswell_crtc_disable(struct drm_crtc *crtc) intel_set_pch_fifo_underrun_reporting(dev, TRANSCODER_A, false); intel_disable_pipe(dev_priv, pipe); + if (intel_crtc->config.dp_encoder_is_mst) + intel_ddi_set_vc_payload_alloc(crtc, false); + intel_ddi_disable_transcoder_func(dev_priv, cpu_transcoder); ironlake_pfit_disable(intel_crtc); @@ -8240,6 +8250,15 @@ static int intel_crtc_cursor_set_obj(struct drm_crtc *crtc, goto fail_locked; } + /* + * Global gtt pte registers are special registers which actually + * forward writes to a chunk of system memory. Which means that + * there is no risk that the register values disappear as soon + * as we call intel_runtime_pm_put(), so it is correct to wrap + * only the pin/unpin/fence and not more. + */ + intel_runtime_pm_get(dev_priv); + /* Note that the w/a also requires 2 PTE of padding following * the bo. We currently fill all unused PTE with the shadow * page and so we should always have valid PTE following the @@ -8252,16 +8271,20 @@ static int intel_crtc_cursor_set_obj(struct drm_crtc *crtc, ret = i915_gem_object_pin_to_display_plane(obj, alignment, NULL); if (ret) { DRM_DEBUG_KMS("failed to move cursor bo into the GTT\n"); + intel_runtime_pm_put(dev_priv); goto fail_locked; } ret = i915_gem_object_put_fence(obj); if (ret) { DRM_DEBUG_KMS("failed to release fence for cursor"); + intel_runtime_pm_put(dev_priv); goto fail_unpin; } addr = i915_gem_obj_ggtt_offset(obj); + + intel_runtime_pm_put(dev_priv); } else { int align = IS_I830(dev) ? 16 * 1024 : 256; ret = i915_gem_object_attach_phys(obj, align); @@ -12481,6 +12504,9 @@ static struct intel_quirk intel_quirks[] = { /* Acer C720 and C720P Chromebooks (Celeron 2955U) have backlights */ { 0x0a06, 0x1025, 0x0a11, quirk_backlight_present }, + /* Acer C720 Chromebook (Core i3 4005U) */ + { 0x0a16, 0x1025, 0x0a11, quirk_backlight_present }, + /* Toshiba CB35 Chromebook (Celeron 2955U) */ { 0x0a06, 0x1179, 0x0a88, quirk_backlight_present }, diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 67cfed6d911..81d7681faa6 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -3661,24 +3661,12 @@ ironlake_dp_detect(struct intel_dp *intel_dp) return intel_dp_detect_dpcd(intel_dp); } -static enum drm_connector_status -g4x_dp_detect(struct intel_dp *intel_dp) +static int g4x_digital_port_connected(struct drm_device *dev, + struct intel_digital_port *intel_dig_port) { - struct drm_device *dev = intel_dp_to_dev(intel_dp); struct drm_i915_private *dev_priv = dev->dev_private; - struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); uint32_t bit; - /* Can't disconnect eDP, but you can close the lid... */ - if (is_edp(intel_dp)) { - enum drm_connector_status status; - - status = intel_panel_detect(dev); - if (status == connector_status_unknown) - status = connector_status_connected; - return status; - } - if (IS_VALLEYVIEW(dev)) { switch (intel_dig_port->port) { case PORT_B: @@ -3691,7 +3679,7 @@ g4x_dp_detect(struct intel_dp *intel_dp) bit = PORTD_HOTPLUG_LIVE_STATUS_VLV; break; default: - return connector_status_unknown; + return -EINVAL; } } else { switch (intel_dig_port->port) { @@ -3705,11 +3693,36 @@ g4x_dp_detect(struct intel_dp *intel_dp) bit = PORTD_HOTPLUG_LIVE_STATUS_G4X; break; default: - return connector_status_unknown; + return -EINVAL; } } if ((I915_READ(PORT_HOTPLUG_STAT) & bit) == 0) + return 0; + return 1; +} + +static enum drm_connector_status +g4x_dp_detect(struct intel_dp *intel_dp) +{ + struct drm_device *dev = intel_dp_to_dev(intel_dp); + struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); + int ret; + + /* Can't disconnect eDP, but you can close the lid... */ + if (is_edp(intel_dp)) { + enum drm_connector_status status; + + status = intel_panel_detect(dev); + if (status == connector_status_unknown) + status = connector_status_connected; + return status; + } + + ret = g4x_digital_port_connected(dev, intel_dig_port); + if (ret == -EINVAL) + return connector_status_unknown; + else if (ret == 0) return connector_status_disconnected; return intel_dp_detect_dpcd(intel_dp); @@ -4066,8 +4079,14 @@ intel_dp_hpd_pulse(struct intel_digital_port *intel_dig_port, bool long_hpd) intel_display_power_get(dev_priv, power_domain); if (long_hpd) { - if (!ibx_digital_port_connected(dev_priv, intel_dig_port)) - goto mst_fail; + + if (HAS_PCH_SPLIT(dev)) { + if (!ibx_digital_port_connected(dev_priv, intel_dig_port)) + goto mst_fail; + } else { + if (g4x_digital_port_connected(dev, intel_dig_port) != 1) + goto mst_fail; + } if (!intel_dp_get_dpcd(intel_dp)) { goto mst_fail; diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index 881361c0f27..fdf40267249 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -538,7 +538,7 @@ static const struct drm_encoder_funcs intel_lvds_enc_funcs = { .destroy = intel_encoder_destroy, }; -static int __init intel_no_lvds_dmi_callback(const struct dmi_system_id *id) +static int intel_no_lvds_dmi_callback(const struct dmi_system_id *id) { DRM_INFO("Skipping LVDS initialization for %s\n", id->ident); return 1; diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c index 59b028f0b1e..8e374449c6b 100644 --- a/drivers/gpu/drm/i915/intel_panel.c +++ b/drivers/gpu/drm/i915/intel_panel.c @@ -801,7 +801,7 @@ static void pch_enable_backlight(struct intel_connector *connector) cpu_ctl2 = I915_READ(BLC_PWM_CPU_CTL2); if (cpu_ctl2 & BLM_PWM_ENABLE) { - WARN(1, "cpu backlight already enabled\n"); + DRM_DEBUG_KMS("cpu backlight already enabled\n"); cpu_ctl2 &= ~BLM_PWM_ENABLE; I915_WRITE(BLC_PWM_CPU_CTL2, cpu_ctl2); } @@ -845,7 +845,7 @@ static void i9xx_enable_backlight(struct intel_connector *connector) ctl = I915_READ(BLC_PWM_CTL); if (ctl & BACKLIGHT_DUTY_CYCLE_MASK_PNV) { - WARN(1, "backlight already enabled\n"); + DRM_DEBUG_KMS("backlight already enabled\n"); I915_WRITE(BLC_PWM_CTL, 0); } @@ -876,7 +876,7 @@ static void i965_enable_backlight(struct intel_connector *connector) ctl2 = I915_READ(BLC_PWM_CTL2); if (ctl2 & BLM_PWM_ENABLE) { - WARN(1, "backlight already enabled\n"); + DRM_DEBUG_KMS("backlight already enabled\n"); ctl2 &= ~BLM_PWM_ENABLE; I915_WRITE(BLC_PWM_CTL2, ctl2); } @@ -910,7 +910,7 @@ static void vlv_enable_backlight(struct intel_connector *connector) ctl2 = I915_READ(VLV_BLC_PWM_CTL2(pipe)); if (ctl2 & BLM_PWM_ENABLE) { - WARN(1, "backlight already enabled\n"); + DRM_DEBUG_KMS("backlight already enabled\n"); ctl2 &= ~BLM_PWM_ENABLE; I915_WRITE(VLV_BLC_PWM_CTL2(pipe), ctl2); } diff --git a/drivers/gpu/drm/i915/intel_tv.c b/drivers/gpu/drm/i915/intel_tv.c index 32186a65681..c69d3ce1b3d 100644 --- a/drivers/gpu/drm/i915/intel_tv.c +++ b/drivers/gpu/drm/i915/intel_tv.c @@ -1311,6 +1311,7 @@ intel_tv_detect(struct drm_connector *connector, bool force) { struct drm_display_mode mode; struct intel_tv *intel_tv = intel_attached_tv(connector); + enum drm_connector_status status; int type; DRM_DEBUG_KMS("[CONNECTOR:%d:%s] force=%d\n", @@ -1328,16 +1329,19 @@ intel_tv_detect(struct drm_connector *connector, bool force) if (intel_get_load_detect_pipe(connector, &mode, &tmp, &ctx)) { type = intel_tv_detect_type(intel_tv, connector); intel_release_load_detect_pipe(connector, &tmp); + status = type < 0 ? + connector_status_disconnected : + connector_status_connected; } else - return connector_status_unknown; + status = connector_status_unknown; drm_modeset_drop_locks(&ctx); drm_modeset_acquire_fini(&ctx); } else return connector->status; - if (type < 0) - return connector_status_disconnected; + if (status != connector_status_connected) + return status; intel_tv->type = type; intel_tv_find_better_format(connector); diff --git a/drivers/gpu/drm/msm/mdp/mdp4/mdp4_crtc.c b/drivers/gpu/drm/msm/mdp/mdp4/mdp4_crtc.c index 74cebb51e8c..c6c80ea28c3 100644 --- a/drivers/gpu/drm/msm/mdp/mdp4/mdp4_crtc.c +++ b/drivers/gpu/drm/msm/mdp/mdp4/mdp4_crtc.c @@ -397,6 +397,7 @@ static void mdp4_crtc_prepare(struct drm_crtc *crtc) struct mdp4_crtc *mdp4_crtc = to_mdp4_crtc(crtc); DBG("%s", mdp4_crtc->name); /* make sure we hold a ref to mdp clks while setting up mode: */ + drm_crtc_vblank_get(crtc); mdp4_enable(get_kms(crtc)); mdp4_crtc_dpms(crtc, DRM_MODE_DPMS_OFF); } @@ -407,6 +408,7 @@ static void mdp4_crtc_commit(struct drm_crtc *crtc) crtc_flush(crtc); /* drop the ref to mdp clk's that we got in prepare: */ mdp4_disable(get_kms(crtc)); + drm_crtc_vblank_put(crtc); } static int mdp4_crtc_mode_set_base(struct drm_crtc *crtc, int x, int y, diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c index b447c01ad89..26ee80db17a 100644 --- a/drivers/gpu/drm/msm/msm_drv.c +++ b/drivers/gpu/drm/msm/msm_drv.c @@ -974,12 +974,11 @@ static int msm_pdev_probe(struct platform_device *pdev) for (i = 0; i < ARRAY_SIZE(devnames); i++) { struct device *dev; - int ret; dev = bus_find_device_by_name(&platform_bus_type, NULL, devnames[i]); if (!dev) { - dev_info(master, "still waiting for %s\n", devnames[i]); + dev_info(&pdev->dev, "still waiting for %s\n", devnames[i]); return -EPROBE_DEFER; } diff --git a/drivers/gpu/drm/msm/msm_fbdev.c b/drivers/gpu/drm/msm/msm_fbdev.c index 9c5221ce391..ab5bfd2d0eb 100644 --- a/drivers/gpu/drm/msm/msm_fbdev.c +++ b/drivers/gpu/drm/msm/msm_fbdev.c @@ -143,7 +143,7 @@ static int msm_fbdev_create(struct drm_fb_helper *helper, ret = msm_gem_get_iova_locked(fbdev->bo, 0, &paddr); if (ret) { dev_err(dev->dev, "failed to get buffer obj iova: %d\n", ret); - goto fail; + goto fail_unlock; } fbi = framebuffer_alloc(0, dev->dev); diff --git a/drivers/gpu/drm/msm/msm_iommu.c b/drivers/gpu/drm/msm/msm_iommu.c index 099af483fdf..7acdaa5688b 100644 --- a/drivers/gpu/drm/msm/msm_iommu.c +++ b/drivers/gpu/drm/msm/msm_iommu.c @@ -27,8 +27,8 @@ struct msm_iommu { static int msm_fault_handler(struct iommu_domain *iommu, struct device *dev, unsigned long iova, int flags, void *arg) { - DBG("*** fault: iova=%08lx, flags=%d", iova, flags); - return -ENOSYS; + pr_warn_ratelimited("*** fault: iova=%08lx, flags=%d\n", iova, flags); + return 0; } static int msm_iommu_attach(struct msm_mmu *mmu, const char **names, int cnt) diff --git a/drivers/gpu/drm/nouveau/core/core/parent.c b/drivers/gpu/drm/nouveau/core/core/parent.c index 8701968a974..30a2911878f 100644 --- a/drivers/gpu/drm/nouveau/core/core/parent.c +++ b/drivers/gpu/drm/nouveau/core/core/parent.c @@ -86,7 +86,7 @@ nouveau_parent_lclass(struct nouveau_object *parent, u32 *lclass, int size) sclass = nv_parent(parent)->sclass; while (sclass) { if (++nr < size) - lclass[nr] = sclass->oclass->handle; + lclass[nr] = sclass->oclass->handle & 0xffff; sclass = sclass->sclass; } @@ -96,7 +96,7 @@ nouveau_parent_lclass(struct nouveau_object *parent, u32 *lclass, int size) if (engine && (oclass = engine->sclass)) { while (oclass->ofuncs) { if (++nr < size) - lclass[nr] = oclass->handle; + lclass[nr] = oclass->handle & 0xffff; oclass++; } } diff --git a/drivers/gpu/drm/radeon/cik.c b/drivers/gpu/drm/radeon/cik.c index 79a5a5519bd..fa9565957f9 100644 --- a/drivers/gpu/drm/radeon/cik.c +++ b/drivers/gpu/drm/radeon/cik.c @@ -5749,20 +5749,17 @@ static int cik_pcie_gart_enable(struct radeon_device *rdev) WREG32(0x15D8, 0); WREG32(0x15DC, 0); - /* empty context1-15 */ - /* FIXME start with 4G, once using 2 level pt switch to full - * vm size space - */ + /* restore context1-15 */ /* set vm size, must be a multiple of 4 */ WREG32(VM_CONTEXT1_PAGE_TABLE_START_ADDR, 0); WREG32(VM_CONTEXT1_PAGE_TABLE_END_ADDR, rdev->vm_manager.max_pfn); for (i = 1; i < 16; i++) { if (i < 8) WREG32(VM_CONTEXT0_PAGE_TABLE_BASE_ADDR + (i << 2), - rdev->gart.table_addr >> 12); + rdev->vm_manager.saved_table_addr[i]); else WREG32(VM_CONTEXT8_PAGE_TABLE_BASE_ADDR + ((i - 8) << 2), - rdev->gart.table_addr >> 12); + rdev->vm_manager.saved_table_addr[i]); } /* enable context1-15 */ @@ -5827,6 +5824,17 @@ static int cik_pcie_gart_enable(struct radeon_device *rdev) */ static void cik_pcie_gart_disable(struct radeon_device *rdev) { + unsigned i; + + for (i = 1; i < 16; ++i) { + uint32_t reg; + if (i < 8) + reg = VM_CONTEXT0_PAGE_TABLE_BASE_ADDR + (i << 2); + else + reg = VM_CONTEXT8_PAGE_TABLE_BASE_ADDR + ((i - 8) << 2); + rdev->vm_manager.saved_table_addr[i] = RREG32(reg); + } + /* Disable all tables */ WREG32(VM_CONTEXT0_CNTL, 0); WREG32(VM_CONTEXT1_CNTL, 0); @@ -9555,6 +9563,9 @@ static void cik_pcie_gen3_enable(struct radeon_device *rdev) int ret, i; u16 tmp16; + if (pci_is_root_bus(rdev->pdev->bus)) + return; + if (radeon_pcie_gen2 == 0) return; @@ -9781,7 +9792,8 @@ static void cik_program_aspm(struct radeon_device *rdev) if (orig != data) WREG32_PCIE_PORT(PCIE_LC_LINK_WIDTH_CNTL, data); - if (!disable_clkreq) { + if (!disable_clkreq && + !pci_is_root_bus(rdev->pdev->bus)) { struct pci_dev *root = rdev->pdev->bus->self; u32 lnkcap; diff --git a/drivers/gpu/drm/radeon/ni.c b/drivers/gpu/drm/radeon/ni.c index ba89375f197..3faee58946d 100644 --- a/drivers/gpu/drm/radeon/ni.c +++ b/drivers/gpu/drm/radeon/ni.c @@ -1271,7 +1271,7 @@ static int cayman_pcie_gart_enable(struct radeon_device *rdev) WREG32(VM_CONTEXT0_PAGE_TABLE_START_ADDR + (i << 2), 0); WREG32(VM_CONTEXT0_PAGE_TABLE_END_ADDR + (i << 2), rdev->vm_manager.max_pfn); WREG32(VM_CONTEXT0_PAGE_TABLE_BASE_ADDR + (i << 2), - rdev->gart.table_addr >> 12); + rdev->vm_manager.saved_table_addr[i]); } /* enable context1-7 */ @@ -1303,6 +1303,13 @@ static int cayman_pcie_gart_enable(struct radeon_device *rdev) static void cayman_pcie_gart_disable(struct radeon_device *rdev) { + unsigned i; + + for (i = 1; i < 8; ++i) { + rdev->vm_manager.saved_table_addr[i] = RREG32( + VM_CONTEXT0_PAGE_TABLE_BASE_ADDR + (i << 2)); + } + /* Disable all tables */ WREG32(VM_CONTEXT0_CNTL, 0); WREG32(VM_CONTEXT1_CNTL, 0); diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index e8bf0ea2dad..e616eb5f6e7 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -1812,7 +1812,6 @@ static void r600_gpu_init(struct radeon_device *rdev) { u32 tiling_config; u32 ramcfg; - u32 cc_rb_backend_disable; u32 cc_gc_shader_pipe_config; u32 tmp; int i, j; @@ -1939,29 +1938,20 @@ static void r600_gpu_init(struct radeon_device *rdev) } tiling_config |= BANK_SWAPS(1); - cc_rb_backend_disable = RREG32(CC_RB_BACKEND_DISABLE) & 0x00ff0000; - tmp = R6XX_MAX_BACKENDS - - r600_count_pipe_bits((cc_rb_backend_disable >> 16) & R6XX_MAX_BACKENDS_MASK); - if (tmp < rdev->config.r600.max_backends) { - rdev->config.r600.max_backends = tmp; - } - cc_gc_shader_pipe_config = RREG32(CC_GC_SHADER_PIPE_CONFIG) & 0x00ffff00; - tmp = R6XX_MAX_PIPES - - r600_count_pipe_bits((cc_gc_shader_pipe_config >> 8) & R6XX_MAX_PIPES_MASK); - if (tmp < rdev->config.r600.max_pipes) { - rdev->config.r600.max_pipes = tmp; - } - tmp = R6XX_MAX_SIMDS - - r600_count_pipe_bits((cc_gc_shader_pipe_config >> 16) & R6XX_MAX_SIMDS_MASK); - if (tmp < rdev->config.r600.max_simds) { - rdev->config.r600.max_simds = tmp; - } tmp = rdev->config.r600.max_simds - r600_count_pipe_bits((cc_gc_shader_pipe_config >> 16) & R6XX_MAX_SIMDS_MASK); rdev->config.r600.active_simds = tmp; disabled_rb_mask = (RREG32(CC_RB_BACKEND_DISABLE) >> 16) & R6XX_MAX_BACKENDS_MASK; + tmp = 0; + for (i = 0; i < rdev->config.r600.max_backends; i++) + tmp |= (1 << i); + /* if all the backends are disabled, fix it up here */ + if ((disabled_rb_mask & tmp) == tmp) { + for (i = 0; i < rdev->config.r600.max_backends; i++) + disabled_rb_mask &= ~(1 << i); + } tmp = (tiling_config & PIPE_TILING__MASK) >> PIPE_TILING__SHIFT; tmp = r6xx_remap_render_backend(rdev, tmp, rdev->config.r600.max_backends, R6XX_MAX_BACKENDS, disabled_rb_mask); diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index b281886f6f5..5f05b4c8433 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -915,6 +915,8 @@ struct radeon_vm_manager { u64 vram_base_offset; /* is vm enabled? */ bool enabled; + /* for hw to save the PD addr on suspend/resume */ + uint32_t saved_table_addr[RADEON_NUM_VM]; }; /* diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c index 2983f17ea1b..d9f5ce715c9 100644 --- a/drivers/gpu/drm/radeon/rv770.c +++ b/drivers/gpu/drm/radeon/rv770.c @@ -1177,7 +1177,6 @@ static void rv770_gpu_init(struct radeon_device *rdev) u32 hdp_host_path_cntl; u32 sq_dyn_gpr_size_simd_ab_0; u32 gb_tiling_config = 0; - u32 cc_rb_backend_disable = 0; u32 cc_gc_shader_pipe_config = 0; u32 mc_arb_ramcfg; u32 db_debug4, tmp; @@ -1311,21 +1310,7 @@ static void rv770_gpu_init(struct radeon_device *rdev) WREG32(SPI_CONFIG_CNTL, 0); } - cc_rb_backend_disable = RREG32(CC_RB_BACKEND_DISABLE) & 0x00ff0000; - tmp = R7XX_MAX_BACKENDS - r600_count_pipe_bits(cc_rb_backend_disable >> 16); - if (tmp < rdev->config.rv770.max_backends) { - rdev->config.rv770.max_backends = tmp; - } - cc_gc_shader_pipe_config = RREG32(CC_GC_SHADER_PIPE_CONFIG) & 0xffffff00; - tmp = R7XX_MAX_PIPES - r600_count_pipe_bits((cc_gc_shader_pipe_config >> 8) & R7XX_MAX_PIPES_MASK); - if (tmp < rdev->config.rv770.max_pipes) { - rdev->config.rv770.max_pipes = tmp; - } - tmp = R7XX_MAX_SIMDS - r600_count_pipe_bits((cc_gc_shader_pipe_config >> 16) & R7XX_MAX_SIMDS_MASK); - if (tmp < rdev->config.rv770.max_simds) { - rdev->config.rv770.max_simds = tmp; - } tmp = rdev->config.rv770.max_simds - r600_count_pipe_bits((cc_gc_shader_pipe_config >> 16) & R7XX_MAX_SIMDS_MASK); rdev->config.rv770.active_simds = tmp; @@ -1348,6 +1333,14 @@ static void rv770_gpu_init(struct radeon_device *rdev) rdev->config.rv770.tiling_npipes = rdev->config.rv770.max_tile_pipes; disabled_rb_mask = (RREG32(CC_RB_BACKEND_DISABLE) >> 16) & R7XX_MAX_BACKENDS_MASK; + tmp = 0; + for (i = 0; i < rdev->config.rv770.max_backends; i++) + tmp |= (1 << i); + /* if all the backends are disabled, fix it up here */ + if ((disabled_rb_mask & tmp) == tmp) { + for (i = 0; i < rdev->config.rv770.max_backends; i++) + disabled_rb_mask &= ~(1 << i); + } tmp = (gb_tiling_config & PIPE_TILING__MASK) >> PIPE_TILING__SHIFT; tmp = r6xx_remap_render_backend(rdev, tmp, rdev->config.rv770.max_backends, R7XX_MAX_BACKENDS, disabled_rb_mask); diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c index a1274a31405..6bce4084775 100644 --- a/drivers/gpu/drm/radeon/si.c +++ b/drivers/gpu/drm/radeon/si.c @@ -4290,10 +4290,10 @@ static int si_pcie_gart_enable(struct radeon_device *rdev) for (i = 1; i < 16; i++) { if (i < 8) WREG32(VM_CONTEXT0_PAGE_TABLE_BASE_ADDR + (i << 2), - rdev->gart.table_addr >> 12); + rdev->vm_manager.saved_table_addr[i]); else WREG32(VM_CONTEXT8_PAGE_TABLE_BASE_ADDR + ((i - 8) << 2), - rdev->gart.table_addr >> 12); + rdev->vm_manager.saved_table_addr[i]); } /* enable context1-15 */ @@ -4325,6 +4325,17 @@ static int si_pcie_gart_enable(struct radeon_device *rdev) static void si_pcie_gart_disable(struct radeon_device *rdev) { + unsigned i; + + for (i = 1; i < 16; ++i) { + uint32_t reg; + if (i < 8) + reg = VM_CONTEXT0_PAGE_TABLE_BASE_ADDR + (i << 2); + else + reg = VM_CONTEXT8_PAGE_TABLE_BASE_ADDR + ((i - 8) << 2); + rdev->vm_manager.saved_table_addr[i] = RREG32(reg); + } + /* Disable all tables */ WREG32(VM_CONTEXT0_CNTL, 0); WREG32(VM_CONTEXT1_CNTL, 0); @@ -7177,6 +7188,9 @@ static void si_pcie_gen3_enable(struct radeon_device *rdev) int ret, i; u16 tmp16; + if (pci_is_root_bus(rdev->pdev->bus)) + return; + if (radeon_pcie_gen2 == 0) return; @@ -7454,7 +7468,8 @@ static void si_program_aspm(struct radeon_device *rdev) if (orig != data) WREG32_PIF_PHY1(PB1_PIF_CNTL, data); - if (!disable_clkreq) { + if (!disable_clkreq && + !pci_is_root_bus(rdev->pdev->bus)) { struct pci_dev *root = rdev->pdev->bus->self; u32 lnkcap; diff --git a/drivers/gpu/drm/sti/Kconfig b/drivers/gpu/drm/sti/Kconfig index 2d9d4252d59..ae8850f3e63 100644 --- a/drivers/gpu/drm/sti/Kconfig +++ b/drivers/gpu/drm/sti/Kconfig @@ -1,6 +1,7 @@ config DRM_STI tristate "DRM Support for STMicroelectronics SoC stiH41x Series" depends on DRM && (SOC_STIH415 || SOC_STIH416 || ARCH_MULTIPLATFORM) + select RESET_CONTROLLER select DRM_KMS_HELPER select DRM_GEM_CMA_HELPER select DRM_KMS_CMA_HELPER diff --git a/drivers/gpu/drm/sti/sti_drm_drv.c b/drivers/gpu/drm/sti/sti_drm_drv.c index a7cc24917a9..223d93c3a05 100644 --- a/drivers/gpu/drm/sti/sti_drm_drv.c +++ b/drivers/gpu/drm/sti/sti_drm_drv.c @@ -201,8 +201,8 @@ static int sti_drm_platform_probe(struct platform_device *pdev) master = platform_device_register_resndata(dev, DRIVER_NAME "__master", -1, NULL, 0, NULL, 0); - if (!master) - return -EINVAL; + if (IS_ERR(master)) + return PTR_ERR(master); platform_set_drvdata(pdev, master); return 0; diff --git a/drivers/gpu/drm/sti/sti_hda.c b/drivers/gpu/drm/sti/sti_hda.c index 72d957f81c0..2ae9a9b7366 100644 --- a/drivers/gpu/drm/sti/sti_hda.c +++ b/drivers/gpu/drm/sti/sti_hda.c @@ -730,16 +730,16 @@ static int sti_hda_probe(struct platform_device *pdev) return -ENOMEM; } hda->regs = devm_ioremap_nocache(dev, res->start, resource_size(res)); - if (IS_ERR(hda->regs)) - return PTR_ERR(hda->regs); + if (!hda->regs) + return -ENOMEM; res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "video-dacs-ctrl"); if (res) { hda->video_dacs_ctrl = devm_ioremap_nocache(dev, res->start, resource_size(res)); - if (IS_ERR(hda->video_dacs_ctrl)) - return PTR_ERR(hda->video_dacs_ctrl); + if (!hda->video_dacs_ctrl) + return -ENOMEM; } else { /* If no existing video-dacs-ctrl resource continue the probe */ DRM_DEBUG_DRIVER("No video-dacs-ctrl resource\n"); @@ -770,7 +770,7 @@ static int sti_hda_remove(struct platform_device *pdev) return 0; } -static struct of_device_id hda_of_match[] = { +static const struct of_device_id hda_of_match[] = { { .compatible = "st,stih416-hda", }, { .compatible = "st,stih407-hda", }, { /* end node */ } diff --git a/drivers/gpu/drm/sti/sti_hdmi.c b/drivers/gpu/drm/sti/sti_hdmi.c index 284e541d970..ef93156a69c 100644 --- a/drivers/gpu/drm/sti/sti_hdmi.c +++ b/drivers/gpu/drm/sti/sti_hdmi.c @@ -677,7 +677,7 @@ static const struct component_ops sti_hdmi_ops = { .unbind = sti_hdmi_unbind, }; -static struct of_device_id hdmi_of_match[] = { +static const struct of_device_id hdmi_of_match[] = { { .compatible = "st,stih416-hdmi", .data = &tx3g0c55phy_ops, @@ -713,8 +713,8 @@ static int sti_hdmi_probe(struct platform_device *pdev) return -ENOMEM; } hdmi->regs = devm_ioremap_nocache(dev, res->start, resource_size(res)); - if (IS_ERR(hdmi->regs)) - return PTR_ERR(hdmi->regs); + if (!hdmi->regs) + return -ENOMEM; if (of_device_is_compatible(np, "st,stih416-hdmi")) { res = platform_get_resource_byname(pdev, IORESOURCE_MEM, @@ -725,8 +725,8 @@ static int sti_hdmi_probe(struct platform_device *pdev) } hdmi->syscfg = devm_ioremap_nocache(dev, res->start, resource_size(res)); - if (IS_ERR(hdmi->syscfg)) - return PTR_ERR(hdmi->syscfg); + if (!hdmi->syscfg) + return -ENOMEM; } diff --git a/drivers/gpu/drm/sti/sti_tvout.c b/drivers/gpu/drm/sti/sti_tvout.c index b69e26fee76..b8afe490356 100644 --- a/drivers/gpu/drm/sti/sti_tvout.c +++ b/drivers/gpu/drm/sti/sti_tvout.c @@ -591,8 +591,8 @@ static int sti_tvout_probe(struct platform_device *pdev) return -ENOMEM; } tvout->regs = devm_ioremap_nocache(dev, res->start, resource_size(res)); - if (IS_ERR(tvout->regs)) - return PTR_ERR(tvout->regs); + if (!tvout->regs) + return -ENOMEM; /* get reset resources */ tvout->reset = devm_reset_control_get(dev, "tvout"); @@ -624,7 +624,7 @@ static int sti_tvout_remove(struct platform_device *pdev) return 0; } -static struct of_device_id tvout_of_match[] = { +static const struct of_device_id tvout_of_match[] = { { .compatible = "st,stih416-tvout", }, { .compatible = "st,stih407-tvout", }, { /* end node */ } diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c b/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c index 7bfdaa163a3..36b871686d3 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c @@ -450,11 +450,11 @@ static int vmw_cmd_res_reloc_add(struct vmw_private *dev_priv, res, id_loc - sw_context->buf_start); if (unlikely(ret != 0)) - goto out_err; + return ret; ret = vmw_resource_val_add(sw_context, res, &node); if (unlikely(ret != 0)) - goto out_err; + return ret; if (res_type == vmw_res_context && dev_priv->has_mob && node->first_usage) { @@ -468,13 +468,13 @@ static int vmw_cmd_res_reloc_add(struct vmw_private *dev_priv, ret = vmw_resource_context_res_add(dev_priv, sw_context, res); if (unlikely(ret != 0)) - goto out_err; + return ret; node->staged_bindings = kzalloc(sizeof(*node->staged_bindings), GFP_KERNEL); if (node->staged_bindings == NULL) { DRM_ERROR("Failed to allocate context binding " "information.\n"); - goto out_err; + return -ENOMEM; } INIT_LIST_HEAD(&node->staged_bindings->list); } @@ -482,8 +482,7 @@ static int vmw_cmd_res_reloc_add(struct vmw_private *dev_priv, if (p_val) *p_val = node; -out_err: - return ret; + return 0; } diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c b/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c index 6ccd993e26b..6eae14d2a3f 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c @@ -180,8 +180,9 @@ void vmw_fifo_release(struct vmw_private *dev_priv, struct vmw_fifo_state *fifo) mutex_lock(&dev_priv->hw_mutex); + vmw_write(dev_priv, SVGA_REG_SYNC, SVGA_SYNC_GENERIC); while (vmw_read(dev_priv, SVGA_REG_BUSY) != 0) - vmw_write(dev_priv, SVGA_REG_SYNC, SVGA_SYNC_GENERIC); + ; dev_priv->last_read_seqno = ioread32(fifo_mem + SVGA_FIFO_FENCE); diff --git a/drivers/hid/hid-logitech-dj.c b/drivers/hid/hid-logitech-dj.c index b7ba82960c7..9bf8637747a 100644 --- a/drivers/hid/hid-logitech-dj.c +++ b/drivers/hid/hid-logitech-dj.c @@ -656,7 +656,6 @@ static int logi_dj_raw_event(struct hid_device *hdev, struct dj_receiver_dev *djrcv_dev = hid_get_drvdata(hdev); struct dj_report *dj_report = (struct dj_report *) data; unsigned long flags; - bool report_processed = false; dbg_hid("%s, size:%d\n", __func__, size); @@ -683,34 +682,42 @@ static int logi_dj_raw_event(struct hid_device *hdev, * device (via hid_input_report() ) and return 1 so hid-core does not do * anything else with it. */ + + /* case 1) */ + if (data[0] != REPORT_ID_DJ_SHORT) + return false; + if ((dj_report->device_index < DJ_DEVICE_INDEX_MIN) || (dj_report->device_index > DJ_DEVICE_INDEX_MAX)) { - dev_err(&hdev->dev, "%s: invalid device index:%d\n", + /* + * Device index is wrong, bail out. + * This driver can ignore safely the receiver notifications, + * so ignore those reports too. + */ + if (dj_report->device_index != DJ_RECEIVER_INDEX) + dev_err(&hdev->dev, "%s: invalid device index:%d\n", __func__, dj_report->device_index); return false; } spin_lock_irqsave(&djrcv_dev->lock, flags); - if (dj_report->report_id == REPORT_ID_DJ_SHORT) { - switch (dj_report->report_type) { - case REPORT_TYPE_NOTIF_DEVICE_PAIRED: - case REPORT_TYPE_NOTIF_DEVICE_UNPAIRED: - logi_dj_recv_queue_notification(djrcv_dev, dj_report); - break; - case REPORT_TYPE_NOTIF_CONNECTION_STATUS: - if (dj_report->report_params[CONNECTION_STATUS_PARAM_STATUS] == - STATUS_LINKLOSS) { - logi_dj_recv_forward_null_report(djrcv_dev, dj_report); - } - break; - default: - logi_dj_recv_forward_report(djrcv_dev, dj_report); + switch (dj_report->report_type) { + case REPORT_TYPE_NOTIF_DEVICE_PAIRED: + case REPORT_TYPE_NOTIF_DEVICE_UNPAIRED: + logi_dj_recv_queue_notification(djrcv_dev, dj_report); + break; + case REPORT_TYPE_NOTIF_CONNECTION_STATUS: + if (dj_report->report_params[CONNECTION_STATUS_PARAM_STATUS] == + STATUS_LINKLOSS) { + logi_dj_recv_forward_null_report(djrcv_dev, dj_report); } - report_processed = true; + break; + default: + logi_dj_recv_forward_report(djrcv_dev, dj_report); } spin_unlock_irqrestore(&djrcv_dev->lock, flags); - return report_processed; + return true; } static int logi_dj_probe(struct hid_device *hdev, diff --git a/drivers/hid/hid-logitech-dj.h b/drivers/hid/hid-logitech-dj.h index 4a4000340ce..daeb0aa4bee 100644 --- a/drivers/hid/hid-logitech-dj.h +++ b/drivers/hid/hid-logitech-dj.h @@ -27,6 +27,7 @@ #define DJ_MAX_PAIRED_DEVICES 6 #define DJ_MAX_NUMBER_NOTIFICATIONS 8 +#define DJ_RECEIVER_INDEX 0 #define DJ_DEVICE_INDEX_MIN 1 #define DJ_DEVICE_INDEX_MAX 6 diff --git a/drivers/hid/hid-magicmouse.c b/drivers/hid/hid-magicmouse.c index ecc2cbf300c..29a74c1efcb 100644 --- a/drivers/hid/hid-magicmouse.c +++ b/drivers/hid/hid-magicmouse.c @@ -290,6 +290,11 @@ static int magicmouse_raw_event(struct hid_device *hdev, if (size < 4 || ((size - 4) % 9) != 0) return 0; npoints = (size - 4) / 9; + if (npoints > 15) { + hid_warn(hdev, "invalid size value (%d) for TRACKPAD_REPORT_ID\n", + size); + return 0; + } msc->ntouches = 0; for (ii = 0; ii < npoints; ii++) magicmouse_emit_touch(msc, ii, data + ii * 9 + 4); @@ -307,6 +312,11 @@ static int magicmouse_raw_event(struct hid_device *hdev, if (size < 6 || ((size - 6) % 8) != 0) return 0; npoints = (size - 6) / 8; + if (npoints > 15) { + hid_warn(hdev, "invalid size value (%d) for MOUSE_REPORT_ID\n", + size); + return 0; + } msc->ntouches = 0; for (ii = 0; ii < npoints; ii++) magicmouse_emit_touch(msc, ii, data + ii * 8 + 6); diff --git a/drivers/hid/hid-picolcd_core.c b/drivers/hid/hid-picolcd_core.c index acbb021065e..020df3c2e8b 100644 --- a/drivers/hid/hid-picolcd_core.c +++ b/drivers/hid/hid-picolcd_core.c @@ -350,6 +350,12 @@ static int picolcd_raw_event(struct hid_device *hdev, if (!data) return 1; + if (size > 64) { + hid_warn(hdev, "invalid size value (%d) for picolcd raw event\n", + size); + return 0; + } + if (report->id == REPORT_KEY_STATE) { if (data->input_keys) ret = picolcd_raw_keypad(data, report, raw_data+1, size-1); diff --git a/drivers/hwmon/ds1621.c b/drivers/hwmon/ds1621.c index fc6f5d54e7f..8890870309e 100644 --- a/drivers/hwmon/ds1621.c +++ b/drivers/hwmon/ds1621.c @@ -309,6 +309,7 @@ static ssize_t set_convrate(struct device *dev, struct device_attribute *da, data->conf |= (resol << DS1621_REG_CONFIG_RESOL_SHIFT); i2c_smbus_write_byte_data(client, DS1621_REG_CONF, data->conf); data->update_interval = ds1721_convrates[resol]; + data->zbits = 7 - resol; mutex_unlock(&data->update_lock); return count; diff --git a/drivers/input/input-mt.c b/drivers/input/input-mt.c index c30204f2fa3..fbe29fcb15c 100644 --- a/drivers/input/input-mt.c +++ b/drivers/input/input-mt.c @@ -236,6 +236,18 @@ void input_mt_report_pointer_emulation(struct input_dev *dev, bool use_count) } EXPORT_SYMBOL(input_mt_report_pointer_emulation); +static void __input_mt_drop_unused(struct input_dev *dev, struct input_mt *mt) +{ + int i; + + for (i = 0; i < mt->num_slots; i++) { + if (!input_mt_is_used(mt, &mt->slots[i])) { + input_mt_slot(dev, i); + input_event(dev, EV_ABS, ABS_MT_TRACKING_ID, -1); + } + } +} + /** * input_mt_drop_unused() - Inactivate slots not seen in this frame * @dev: input device with allocated MT slots @@ -245,19 +257,11 @@ EXPORT_SYMBOL(input_mt_report_pointer_emulation); void input_mt_drop_unused(struct input_dev *dev) { struct input_mt *mt = dev->mt; - int i; - if (!mt) - return; - - for (i = 0; i < mt->num_slots; i++) { - if (!input_mt_is_used(mt, &mt->slots[i])) { - input_mt_slot(dev, i); - input_event(dev, EV_ABS, ABS_MT_TRACKING_ID, -1); - } + if (mt) { + __input_mt_drop_unused(dev, mt); + mt->frame++; } - - mt->frame++; } EXPORT_SYMBOL(input_mt_drop_unused); @@ -278,12 +282,14 @@ void input_mt_sync_frame(struct input_dev *dev) return; if (mt->flags & INPUT_MT_DROP_UNUSED) - input_mt_drop_unused(dev); + __input_mt_drop_unused(dev, mt); if ((mt->flags & INPUT_MT_POINTER) && !(mt->flags & INPUT_MT_SEMI_MT)) use_count = true; input_mt_report_pointer_emulation(dev, use_count); + + mt->frame++; } EXPORT_SYMBOL(input_mt_sync_frame); diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c index a59a1a64b67..a956b980ee7 100644 --- a/drivers/input/mouse/alps.c +++ b/drivers/input/mouse/alps.c @@ -2234,8 +2234,8 @@ static int alps_identify(struct psmouse *psmouse, struct alps_data *priv) return 0; } - psmouse_info(psmouse, - "Unknown ALPS touchpad: E7=%3ph, EC=%3ph\n", e7, ec); + psmouse_dbg(psmouse, + "Likely not an ALPS touchpad: E7=%3ph, EC=%3ph\n", e7, ec); return -EINVAL; } diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c index ee2a04d90d2..da51738eb59 100644 --- a/drivers/input/mouse/elantech.c +++ b/drivers/input/mouse/elantech.c @@ -18,6 +18,7 @@ #include <linux/input/mt.h> #include <linux/serio.h> #include <linux/libps2.h> +#include <asm/unaligned.h> #include "psmouse.h" #include "elantech.h" @@ -403,6 +404,68 @@ static void elantech_report_absolute_v2(struct psmouse *psmouse) input_sync(dev); } +static void elantech_report_trackpoint(struct psmouse *psmouse, + int packet_type) +{ + /* + * byte 0: 0 0 sx sy 0 M R L + * byte 1:~sx 0 0 0 0 0 0 0 + * byte 2:~sy 0 0 0 0 0 0 0 + * byte 3: 0 0 ~sy ~sx 0 1 1 0 + * byte 4: x7 x6 x5 x4 x3 x2 x1 x0 + * byte 5: y7 y6 y5 y4 y3 y2 y1 y0 + * + * x and y are written in two's complement spread + * over 9 bits with sx/sy the relative top bit and + * x7..x0 and y7..y0 the lower bits. + * The sign of y is opposite to what the input driver + * expects for a relative movement + */ + + struct elantech_data *etd = psmouse->private; + struct input_dev *tp_dev = etd->tp_dev; + unsigned char *packet = psmouse->packet; + int x, y; + u32 t; + + if (dev_WARN_ONCE(&psmouse->ps2dev.serio->dev, + !tp_dev, + psmouse_fmt("Unexpected trackpoint message\n"))) { + if (etd->debug == 1) + elantech_packet_dump(psmouse); + return; + } + + t = get_unaligned_le32(&packet[0]); + + switch (t & ~7U) { + case 0x06000030U: + case 0x16008020U: + case 0x26800010U: + case 0x36808000U: + x = packet[4] - (int)((packet[1]^0x80) << 1); + y = (int)((packet[2]^0x80) << 1) - packet[5]; + + input_report_key(tp_dev, BTN_LEFT, packet[0] & 0x01); + input_report_key(tp_dev, BTN_RIGHT, packet[0] & 0x02); + input_report_key(tp_dev, BTN_MIDDLE, packet[0] & 0x04); + + input_report_rel(tp_dev, REL_X, x); + input_report_rel(tp_dev, REL_Y, y); + + input_sync(tp_dev); + + break; + + default: + /* Dump unexpected packet sequences if debug=1 (default) */ + if (etd->debug == 1) + elantech_packet_dump(psmouse); + + break; + } +} + /* * Interpret complete data packets and report absolute mode input events for * hardware version 3. (12 byte packets for two fingers) @@ -715,6 +778,8 @@ static int elantech_packet_check_v3(struct psmouse *psmouse) if ((packet[0] & 0x0c) == 0x0c && (packet[3] & 0xce) == 0x0c) return PACKET_V3_TAIL; + if ((packet[3] & 0x0f) == 0x06) + return PACKET_TRACKPOINT; } return PACKET_UNKNOWN; @@ -791,14 +856,23 @@ static psmouse_ret_t elantech_process_byte(struct psmouse *psmouse) case 3: packet_type = elantech_packet_check_v3(psmouse); - /* ignore debounce */ - if (packet_type == PACKET_DEBOUNCE) - return PSMOUSE_FULL_PACKET; - - if (packet_type == PACKET_UNKNOWN) + switch (packet_type) { + case PACKET_UNKNOWN: return PSMOUSE_BAD_DATA; - elantech_report_absolute_v3(psmouse, packet_type); + case PACKET_DEBOUNCE: + /* ignore debounce */ + break; + + case PACKET_TRACKPOINT: + elantech_report_trackpoint(psmouse, packet_type); + break; + + default: + elantech_report_absolute_v3(psmouse, packet_type); + break; + } + break; case 4: @@ -1018,8 +1092,10 @@ static int elantech_get_resolution_v4(struct psmouse *psmouse, * Asus UX31 0x361f00 20, 15, 0e clickpad * Asus UX32VD 0x361f02 00, 15, 0e clickpad * Avatar AVIU-145A2 0x361f00 ? clickpad + * Fujitsu H730 0x570f00 c0, 14, 0c 3 hw buttons (**) * Gigabyte U2442 0x450f01 58, 17, 0c 2 hw buttons * Lenovo L430 0x350f02 b9, 15, 0c 2 hw buttons (*) + * Lenovo L530 0x350f02 b9, 15, 0c 2 hw buttons (*) * Samsung NF210 0x150b00 78, 14, 0a 2 hw buttons * Samsung NP770Z5E 0x575f01 10, 15, 0f clickpad * Samsung NP700Z5B 0x361f06 21, 15, 0f clickpad @@ -1029,6 +1105,8 @@ static int elantech_get_resolution_v4(struct psmouse *psmouse, * Samsung RF710 0x450f00 ? 2 hw buttons * System76 Pangolin 0x250f01 ? 2 hw buttons * (*) + 3 trackpoint buttons + * (**) + 0 trackpoint buttons + * Note: Lenovo L430 and Lenovo L430 have the same fw_version/caps */ static void elantech_set_buttonpad_prop(struct psmouse *psmouse) { @@ -1324,6 +1402,10 @@ int elantech_detect(struct psmouse *psmouse, bool set_properties) */ static void elantech_disconnect(struct psmouse *psmouse) { + struct elantech_data *etd = psmouse->private; + + if (etd->tp_dev) + input_unregister_device(etd->tp_dev); sysfs_remove_group(&psmouse->ps2dev.serio->dev.kobj, &elantech_attr_group); kfree(psmouse->private); @@ -1438,8 +1520,10 @@ static int elantech_set_properties(struct elantech_data *etd) int elantech_init(struct psmouse *psmouse) { struct elantech_data *etd; - int i, error; + int i; + int error = -EINVAL; unsigned char param[3]; + struct input_dev *tp_dev; psmouse->private = etd = kzalloc(sizeof(struct elantech_data), GFP_KERNEL); if (!etd) @@ -1498,14 +1582,49 @@ int elantech_init(struct psmouse *psmouse) goto init_fail; } + /* The MSB indicates the presence of the trackpoint */ + if ((etd->capabilities[0] & 0x80) == 0x80) { + tp_dev = input_allocate_device(); + + if (!tp_dev) { + error = -ENOMEM; + goto init_fail_tp_alloc; + } + + etd->tp_dev = tp_dev; + snprintf(etd->tp_phys, sizeof(etd->tp_phys), "%s/input1", + psmouse->ps2dev.serio->phys); + tp_dev->phys = etd->tp_phys; + tp_dev->name = "Elantech PS/2 TrackPoint"; + tp_dev->id.bustype = BUS_I8042; + tp_dev->id.vendor = 0x0002; + tp_dev->id.product = PSMOUSE_ELANTECH; + tp_dev->id.version = 0x0000; + tp_dev->dev.parent = &psmouse->ps2dev.serio->dev; + tp_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL); + tp_dev->relbit[BIT_WORD(REL_X)] = + BIT_MASK(REL_X) | BIT_MASK(REL_Y); + tp_dev->keybit[BIT_WORD(BTN_LEFT)] = + BIT_MASK(BTN_LEFT) | BIT_MASK(BTN_MIDDLE) | + BIT_MASK(BTN_RIGHT); + error = input_register_device(etd->tp_dev); + if (error < 0) + goto init_fail_tp_reg; + } + psmouse->protocol_handler = elantech_process_byte; psmouse->disconnect = elantech_disconnect; psmouse->reconnect = elantech_reconnect; psmouse->pktsize = etd->hw_version > 1 ? 6 : 4; return 0; - + init_fail_tp_reg: + input_free_device(tp_dev); + init_fail_tp_alloc: + sysfs_remove_group(&psmouse->ps2dev.serio->dev.kobj, + &elantech_attr_group); init_fail: + psmouse_reset(psmouse); kfree(etd); - return -1; + return error; } diff --git a/drivers/input/mouse/elantech.h b/drivers/input/mouse/elantech.h index 9e0e2a1f340..6f3afec02f0 100644 --- a/drivers/input/mouse/elantech.h +++ b/drivers/input/mouse/elantech.h @@ -94,6 +94,7 @@ #define PACKET_V4_HEAD 0x05 #define PACKET_V4_MOTION 0x06 #define PACKET_V4_STATUS 0x07 +#define PACKET_TRACKPOINT 0x08 /* * track up to 5 fingers for v4 hardware @@ -114,6 +115,8 @@ struct finger_pos { }; struct elantech_data { + struct input_dev *tp_dev; /* Relative device for trackpoint */ + char tp_phys[32]; unsigned char reg_07; unsigned char reg_10; unsigned char reg_11; diff --git a/drivers/input/serio/i8042-sparcio.h b/drivers/input/serio/i8042-sparcio.h index d6aa4c67dbb..93cb7912703 100644 --- a/drivers/input/serio/i8042-sparcio.h +++ b/drivers/input/serio/i8042-sparcio.h @@ -17,7 +17,6 @@ static int i8042_aux_irq = -1; #define I8042_MUX_PHYS_DESC "sparcps2/serio%d" static void __iomem *kbd_iobase; -static struct resource *kbd_res; #define I8042_COMMAND_REG (kbd_iobase + 0x64UL) #define I8042_DATA_REG (kbd_iobase + 0x60UL) @@ -44,6 +43,8 @@ static inline void i8042_write_command(int val) #ifdef CONFIG_PCI +static struct resource *kbd_res; + #define OBP_PS2KBD_NAME1 "kb_ps2" #define OBP_PS2KBD_NAME2 "keyboard" #define OBP_PS2MS_NAME1 "kdmouse" diff --git a/drivers/leds/led-class.c b/drivers/leds/led-class.c index 129729d3547..aa29198fca3 100644 --- a/drivers/leds/led-class.c +++ b/drivers/leds/led-class.c @@ -15,10 +15,10 @@ #include <linux/list.h> #include <linux/spinlock.h> #include <linux/device.h> +#include <linux/timer.h> #include <linux/err.h> #include <linux/ctype.h> #include <linux/leds.h> -#include <linux/workqueue.h> #include "leds.h" static struct class *leds_class; @@ -97,10 +97,9 @@ static const struct attribute_group *led_groups[] = { NULL, }; -static void led_work_function(struct work_struct *ws) +static void led_timer_function(unsigned long data) { - struct led_classdev *led_cdev = - container_of(ws, struct led_classdev, blink_work.work); + struct led_classdev *led_cdev = (void *)data; unsigned long brightness; unsigned long delay; @@ -144,8 +143,7 @@ static void led_work_function(struct work_struct *ws) } } - queue_delayed_work(system_wq, &led_cdev->blink_work, - msecs_to_jiffies(delay)); + mod_timer(&led_cdev->blink_timer, jiffies + msecs_to_jiffies(delay)); } static void set_brightness_delayed(struct work_struct *ws) @@ -233,7 +231,9 @@ int led_classdev_register(struct device *parent, struct led_classdev *led_cdev) INIT_WORK(&led_cdev->set_brightness_work, set_brightness_delayed); - INIT_DELAYED_WORK(&led_cdev->blink_work, led_work_function); + init_timer(&led_cdev->blink_timer); + led_cdev->blink_timer.function = led_timer_function; + led_cdev->blink_timer.data = (unsigned long)led_cdev; #ifdef CONFIG_LEDS_TRIGGERS led_trigger_set_default(led_cdev); diff --git a/drivers/leds/led-core.c b/drivers/leds/led-core.c index 4bb116867b8..71b40d3bf77 100644 --- a/drivers/leds/led-core.c +++ b/drivers/leds/led-core.c @@ -16,7 +16,6 @@ #include <linux/module.h> #include <linux/rwsem.h> #include <linux/leds.h> -#include <linux/workqueue.h> #include "leds.h" DECLARE_RWSEM(leds_list_lock); @@ -52,7 +51,7 @@ static void led_set_software_blink(struct led_classdev *led_cdev, return; } - queue_delayed_work(system_wq, &led_cdev->blink_work, 1); + mod_timer(&led_cdev->blink_timer, jiffies + 1); } @@ -76,7 +75,7 @@ void led_blink_set(struct led_classdev *led_cdev, unsigned long *delay_on, unsigned long *delay_off) { - cancel_delayed_work_sync(&led_cdev->blink_work); + del_timer_sync(&led_cdev->blink_timer); led_cdev->flags &= ~LED_BLINK_ONESHOT; led_cdev->flags &= ~LED_BLINK_ONESHOT_STOP; @@ -91,7 +90,7 @@ void led_blink_set_oneshot(struct led_classdev *led_cdev, int invert) { if ((led_cdev->flags & LED_BLINK_ONESHOT) && - delayed_work_pending(&led_cdev->blink_work)) + timer_pending(&led_cdev->blink_timer)) return; led_cdev->flags |= LED_BLINK_ONESHOT; @@ -108,7 +107,7 @@ EXPORT_SYMBOL(led_blink_set_oneshot); void led_stop_software_blink(struct led_classdev *led_cdev) { - cancel_delayed_work_sync(&led_cdev->blink_work); + del_timer_sync(&led_cdev->blink_timer); led_cdev->blink_delay_on = 0; led_cdev->blink_delay_off = 0; } @@ -117,7 +116,7 @@ EXPORT_SYMBOL_GPL(led_stop_software_blink); void led_set_brightness(struct led_classdev *led_cdev, enum led_brightness brightness) { - /* delay brightness setting if need to stop soft-blink work */ + /* delay brightness setting if need to stop soft-blink timer */ if (led_cdev->blink_delay_on || led_cdev->blink_delay_off) { led_cdev->delayed_set_value = brightness; schedule_work(&led_cdev->set_brightness_work); diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c index 2785007e0e4..cd15e080122 100644 --- a/drivers/md/dm-crypt.c +++ b/drivers/md/dm-crypt.c @@ -1688,6 +1688,7 @@ static int crypt_ctr(struct dm_target *ti, unsigned int argc, char **argv) unsigned int key_size, opt_params; unsigned long long tmpll; int ret; + size_t iv_size_padding; struct dm_arg_set as; const char *opt_string; char dummy; @@ -1724,20 +1725,32 @@ static int crypt_ctr(struct dm_target *ti, unsigned int argc, char **argv) cc->dmreq_start = sizeof(struct ablkcipher_request); cc->dmreq_start += crypto_ablkcipher_reqsize(any_tfm(cc)); - cc->dmreq_start = ALIGN(cc->dmreq_start, crypto_tfm_ctx_alignment()); - cc->dmreq_start += crypto_ablkcipher_alignmask(any_tfm(cc)) & - ~(crypto_tfm_ctx_alignment() - 1); + cc->dmreq_start = ALIGN(cc->dmreq_start, __alignof__(struct dm_crypt_request)); + + if (crypto_ablkcipher_alignmask(any_tfm(cc)) < CRYPTO_MINALIGN) { + /* Allocate the padding exactly */ + iv_size_padding = -(cc->dmreq_start + sizeof(struct dm_crypt_request)) + & crypto_ablkcipher_alignmask(any_tfm(cc)); + } else { + /* + * If the cipher requires greater alignment than kmalloc + * alignment, we don't know the exact position of the + * initialization vector. We must assume worst case. + */ + iv_size_padding = crypto_ablkcipher_alignmask(any_tfm(cc)); + } cc->req_pool = mempool_create_kmalloc_pool(MIN_IOS, cc->dmreq_start + - sizeof(struct dm_crypt_request) + cc->iv_size); + sizeof(struct dm_crypt_request) + iv_size_padding + cc->iv_size); if (!cc->req_pool) { ti->error = "Cannot allocate crypt request mempool"; goto bad; } cc->per_bio_data_size = ti->per_bio_data_size = - sizeof(struct dm_crypt_io) + cc->dmreq_start + - sizeof(struct dm_crypt_request) + cc->iv_size; + ALIGN(sizeof(struct dm_crypt_io) + cc->dmreq_start + + sizeof(struct dm_crypt_request) + iv_size_padding + cc->iv_size, + ARCH_KMALLOC_MINALIGN); cc->page_pool = mempool_create_page_pool(MIN_POOL_PAGES, 0); if (!cc->page_pool) { diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c index ce48aa72bb4..bde2fc07241 100644 --- a/drivers/mfd/ab8500-core.c +++ b/drivers/mfd/ab8500-core.c @@ -1754,7 +1754,7 @@ static int ab8500_probe(struct platform_device *pdev) if (ret) return ret; -#if CONFIG_DEBUG_FS +#ifdef CONFIG_DEBUG_FS /* Pass to debugfs */ ab8500_debug_resources[0].start = ab8500->irq; ab8500_debug_resources[0].end = ab8500->irq; diff --git a/drivers/mfd/htc-i2cpld.c b/drivers/mfd/htc-i2cpld.c index b44f0203983..6bdb78c2ac7 100644 --- a/drivers/mfd/htc-i2cpld.c +++ b/drivers/mfd/htc-i2cpld.c @@ -404,7 +404,7 @@ static int htcpld_register_chip_i2c( } i2c_set_clientdata(client, chip); - snprintf(client->name, I2C_NAME_SIZE, "Chip_0x%d", client->addr); + snprintf(client->name, I2C_NAME_SIZE, "Chip_0x%x", client->addr); chip->client = client; /* Reset the chip */ diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c index 33a9234b701..83dab2f0a50 100644 --- a/drivers/mfd/omap-usb-host.c +++ b/drivers/mfd/omap-usb-host.c @@ -647,7 +647,7 @@ static int usbhs_omap_probe(struct platform_device *pdev) default: omap->nports = OMAP3_HS_USB_PORTS; dev_dbg(dev, - "USB HOST Rev:0x%d not recognized, assuming %d ports\n", + "USB HOST Rev:0x%x not recognized, assuming %d ports\n", omap->usbhs_rev, omap->nports); break; } diff --git a/drivers/mfd/twl4030-power.c b/drivers/mfd/twl4030-power.c index 3bc969a5916..4d3ff377149 100644 --- a/drivers/mfd/twl4030-power.c +++ b/drivers/mfd/twl4030-power.c @@ -724,24 +724,24 @@ static struct twl4030_script *omap3_idle_scripts[] = { * above. */ static struct twl4030_resconfig omap3_idle_rconfig[] = { - TWL_REMAP_SLEEP(RES_VAUX1, DEV_GRP_NULL, 0, 0), - TWL_REMAP_SLEEP(RES_VAUX2, DEV_GRP_NULL, 0, 0), - TWL_REMAP_SLEEP(RES_VAUX3, DEV_GRP_NULL, 0, 0), - TWL_REMAP_SLEEP(RES_VAUX4, DEV_GRP_NULL, 0, 0), - TWL_REMAP_SLEEP(RES_VMMC1, DEV_GRP_NULL, 0, 0), - TWL_REMAP_SLEEP(RES_VMMC2, DEV_GRP_NULL, 0, 0), + TWL_REMAP_SLEEP(RES_VAUX1, TWL4030_RESCONFIG_UNDEF, 0, 0), + TWL_REMAP_SLEEP(RES_VAUX2, TWL4030_RESCONFIG_UNDEF, 0, 0), + TWL_REMAP_SLEEP(RES_VAUX3, TWL4030_RESCONFIG_UNDEF, 0, 0), + TWL_REMAP_SLEEP(RES_VAUX4, TWL4030_RESCONFIG_UNDEF, 0, 0), + TWL_REMAP_SLEEP(RES_VMMC1, TWL4030_RESCONFIG_UNDEF, 0, 0), + TWL_REMAP_SLEEP(RES_VMMC2, TWL4030_RESCONFIG_UNDEF, 0, 0), TWL_REMAP_OFF(RES_VPLL1, DEV_GRP_P1, 3, 1), TWL_REMAP_SLEEP(RES_VPLL2, DEV_GRP_P1, 0, 0), - TWL_REMAP_SLEEP(RES_VSIM, DEV_GRP_NULL, 0, 0), - TWL_REMAP_SLEEP(RES_VDAC, DEV_GRP_NULL, 0, 0), + TWL_REMAP_SLEEP(RES_VSIM, TWL4030_RESCONFIG_UNDEF, 0, 0), + TWL_REMAP_SLEEP(RES_VDAC, TWL4030_RESCONFIG_UNDEF, 0, 0), TWL_REMAP_SLEEP(RES_VINTANA1, TWL_DEV_GRP_P123, 1, 2), TWL_REMAP_SLEEP(RES_VINTANA2, TWL_DEV_GRP_P123, 0, 2), TWL_REMAP_SLEEP(RES_VINTDIG, TWL_DEV_GRP_P123, 1, 2), TWL_REMAP_SLEEP(RES_VIO, TWL_DEV_GRP_P123, 2, 2), TWL_REMAP_OFF(RES_VDD1, DEV_GRP_P1, 4, 1), TWL_REMAP_OFF(RES_VDD2, DEV_GRP_P1, 3, 1), - TWL_REMAP_SLEEP(RES_VUSB_1V5, DEV_GRP_NULL, 0, 0), - TWL_REMAP_SLEEP(RES_VUSB_1V8, DEV_GRP_NULL, 0, 0), + TWL_REMAP_SLEEP(RES_VUSB_1V5, TWL4030_RESCONFIG_UNDEF, 0, 0), + TWL_REMAP_SLEEP(RES_VUSB_1V8, TWL4030_RESCONFIG_UNDEF, 0, 0), TWL_REMAP_SLEEP(RES_VUSB_3V1, TWL_DEV_GRP_P123, 0, 0), /* Resource #20 USB charge pump skipped */ TWL_REMAP_SLEEP(RES_REGEN, TWL_DEV_GRP_P123, 2, 1), diff --git a/drivers/misc/mei/client.c b/drivers/misc/mei/client.c index 324e1de9368..2da05c0e113 100644 --- a/drivers/misc/mei/client.c +++ b/drivers/misc/mei/client.c @@ -601,6 +601,7 @@ int mei_cl_connect(struct mei_cl *cl, struct file *file) cl->timer_count = MEI_CONNECT_TIMEOUT; list_add_tail(&cb->list, &dev->ctrl_rd_list.list); } else { + cl->state = MEI_FILE_INITIALIZING; list_add_tail(&cb->list, &dev->ctrl_wr_list.list); } diff --git a/drivers/misc/mei/nfc.c b/drivers/misc/mei/nfc.c index 3095fc514a6..5ccc23bc769 100644 --- a/drivers/misc/mei/nfc.c +++ b/drivers/misc/mei/nfc.c @@ -342,9 +342,10 @@ static int mei_nfc_send(struct mei_cl_device *cldev, u8 *buf, size_t length) ndev = (struct mei_nfc_dev *) cldev->priv_data; dev = ndev->cl->dev; + err = -ENOMEM; mei_buf = kzalloc(length + MEI_NFC_HEADER_SIZE, GFP_KERNEL); if (!mei_buf) - return -ENOMEM; + goto out; hdr = (struct mei_nfc_hci_hdr *) mei_buf; hdr->cmd = MEI_NFC_CMD_HCI_SEND; @@ -354,12 +355,9 @@ static int mei_nfc_send(struct mei_cl_device *cldev, u8 *buf, size_t length) hdr->data_size = length; memcpy(mei_buf + MEI_NFC_HEADER_SIZE, buf, length); - err = __mei_cl_send(ndev->cl, mei_buf, length + MEI_NFC_HEADER_SIZE); if (err < 0) - return err; - - kfree(mei_buf); + goto out; if (!wait_event_interruptible_timeout(ndev->send_wq, ndev->recv_req_id == ndev->req_id, HZ)) { @@ -368,7 +366,8 @@ static int mei_nfc_send(struct mei_cl_device *cldev, u8 *buf, size_t length) } else { ndev->req_id++; } - +out: + kfree(mei_buf); return err; } diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c index f0ed92e210a..5967b385141 100644 --- a/drivers/mtd/nand/omap2.c +++ b/drivers/mtd/nand/omap2.c @@ -931,7 +931,7 @@ static int omap_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u32 val; val = readl(info->reg.gpmc_ecc_config); - if (((val >> ECC_CONFIG_CS_SHIFT) & ~CS_MASK) != info->gpmc_cs) + if (((val >> ECC_CONFIG_CS_SHIFT) & CS_MASK) != info->gpmc_cs) return -EINVAL; /* read ecc result */ @@ -1794,9 +1794,12 @@ static int omap_nand_probe(struct platform_device *pdev) } /* populate MTD interface based on ECC scheme */ - nand_chip->ecc.layout = &omap_oobinfo; ecclayout = &omap_oobinfo; switch (info->ecc_opt) { + case OMAP_ECC_HAM1_CODE_SW: + nand_chip->ecc.mode = NAND_ECC_SOFT; + break; + case OMAP_ECC_HAM1_CODE_HW: pr_info("nand: using OMAP_ECC_HAM1_CODE_HW\n"); nand_chip->ecc.mode = NAND_ECC_HW; @@ -1848,7 +1851,7 @@ static int omap_nand_probe(struct platform_device *pdev) nand_chip->ecc.priv = nand_bch_init(mtd, nand_chip->ecc.size, nand_chip->ecc.bytes, - &nand_chip->ecc.layout); + &ecclayout); if (!nand_chip->ecc.priv) { pr_err("nand: error: unable to use s/w BCH library\n"); err = -EINVAL; @@ -1923,7 +1926,7 @@ static int omap_nand_probe(struct platform_device *pdev) nand_chip->ecc.priv = nand_bch_init(mtd, nand_chip->ecc.size, nand_chip->ecc.bytes, - &nand_chip->ecc.layout); + &ecclayout); if (!nand_chip->ecc.priv) { pr_err("nand: error: unable to use s/w BCH library\n"); err = -EINVAL; @@ -2012,6 +2015,9 @@ static int omap_nand_probe(struct platform_device *pdev) goto return_error; } + if (info->ecc_opt == OMAP_ECC_HAM1_CODE_SW) + goto scan_tail; + /* all OOB bytes from oobfree->offset till end off OOB are free */ ecclayout->oobfree->length = mtd->oobsize - ecclayout->oobfree->offset; /* check if NAND device's OOB is enough to store ECC signatures */ @@ -2021,7 +2027,9 @@ static int omap_nand_probe(struct platform_device *pdev) err = -EINVAL; goto return_error; } + nand_chip->ecc.layout = ecclayout; +scan_tail: /* second phase scan */ if (nand_scan_tail(mtd)) { err = -ENXIO; diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig index 8922c376456..90f5ccacce4 100644 --- a/drivers/pci/host/Kconfig +++ b/drivers/pci/host/Kconfig @@ -56,7 +56,7 @@ config PCI_HOST_GENERIC controller, such as the one emulated by kvmtool. config PCIE_SPEAR13XX - tristate "STMicroelectronics SPEAr PCIe controller" + bool "STMicroelectronics SPEAr PCIe controller" depends on ARCH_SPEAR13XX select PCIEPORTBUS select PCIE_DW diff --git a/drivers/pinctrl/nomadik/pinctrl-abx500.c b/drivers/pinctrl/nomadik/pinctrl-abx500.c index a53a689a2bf..8c6fd8d4dd3 100644 --- a/drivers/pinctrl/nomadik/pinctrl-abx500.c +++ b/drivers/pinctrl/nomadik/pinctrl-abx500.c @@ -620,8 +620,7 @@ static void abx500_gpio_dbg_show_one(struct seq_file *s, } else seq_printf(s, " %-9s", chip->get(chip, offset) ? "hi" : "lo"); - if (pctldev) - mode = abx500_get_mode(pctldev, chip, offset); + mode = abx500_get_mode(pctldev, chip, offset); seq_printf(s, " %s", (mode < 0) ? "unknown" : modes[mode]); diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c index af1ba4fc150..60464a2648a 100644 --- a/drivers/pinctrl/pinctrl-at91.c +++ b/drivers/pinctrl/pinctrl-at91.c @@ -497,10 +497,10 @@ static struct at91_pinctrl_mux_ops at91sam9x5_ops = { static void at91_pin_dbg(const struct device *dev, const struct at91_pmx_pin *pin) { if (pin->mux) { - dev_dbg(dev, "pio%c%d configured as periph%c with conf = 0x%lu\n", + dev_dbg(dev, "pio%c%d configured as periph%c with conf = 0x%lx\n", pin->bank + 'A', pin->pin, pin->mux - 1 + 'A', pin->conf); } else { - dev_dbg(dev, "pio%c%d configured as gpio with conf = 0x%lu\n", + dev_dbg(dev, "pio%c%d configured as gpio with conf = 0x%lx\n", pin->bank + 'A', pin->pin, pin->conf); } } diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c index 5e8b2e04cd7..0c372a300cb 100644 --- a/drivers/pinctrl/pinctrl-rockchip.c +++ b/drivers/pinctrl/pinctrl-rockchip.c @@ -438,7 +438,7 @@ static int rockchip_set_mux(struct rockchip_pin_bank *bank, int pin, int mux) int reg, ret, mask; unsigned long flags; u8 bit; - u32 data; + u32 data, rmask; if (iomux_num > 3) return -EINVAL; @@ -478,8 +478,9 @@ static int rockchip_set_mux(struct rockchip_pin_bank *bank, int pin, int mux) spin_lock_irqsave(&bank->slock, flags); data = (mask << (bit + 16)); + rmask = data | (data >> 16); data |= (mux & mask) << bit; - ret = regmap_write(regmap, reg, data); + ret = regmap_update_bits(regmap, reg, rmask, data); spin_unlock_irqrestore(&bank->slock, flags); @@ -634,7 +635,7 @@ static int rk3288_set_drive(struct rockchip_pin_bank *bank, int pin_num, struct regmap *regmap; unsigned long flags; int reg, ret, i; - u32 data; + u32 data, rmask; u8 bit; rk3288_calc_drv_reg_and_bit(bank, pin_num, ®map, ®, &bit); @@ -657,9 +658,10 @@ static int rk3288_set_drive(struct rockchip_pin_bank *bank, int pin_num, /* enable the write to the equivalent lower bits */ data = ((1 << RK3288_DRV_BITS_PER_PIN) - 1) << (bit + 16); + rmask = data | (data >> 16); data |= (ret << bit); - ret = regmap_write(regmap, reg, data); + ret = regmap_update_bits(regmap, reg, rmask, data); spin_unlock_irqrestore(&bank->slock, flags); return ret; @@ -722,7 +724,7 @@ static int rockchip_set_pull(struct rockchip_pin_bank *bank, int reg, ret; unsigned long flags; u8 bit; - u32 data; + u32 data, rmask; dev_dbg(info->dev, "setting pull of GPIO%d-%d to %d\n", bank->bank_num, pin_num, pull); @@ -750,6 +752,7 @@ static int rockchip_set_pull(struct rockchip_pin_bank *bank, /* enable the write to the equivalent lower bits */ data = ((1 << RK3188_PULL_BITS_PER_PIN) - 1) << (bit + 16); + rmask = data | (data >> 16); switch (pull) { case PIN_CONFIG_BIAS_DISABLE: @@ -770,7 +773,7 @@ static int rockchip_set_pull(struct rockchip_pin_bank *bank, return -EINVAL; } - ret = regmap_write(regmap, reg, data); + ret = regmap_update_bits(regmap, reg, rmask, data); spin_unlock_irqrestore(&bank->slock, flags); break; diff --git a/drivers/pinctrl/pinctrl-tegra-xusb.c b/drivers/pinctrl/pinctrl-tegra-xusb.c index a0662047484..e641b4226c4 100644 --- a/drivers/pinctrl/pinctrl-tegra-xusb.c +++ b/drivers/pinctrl/pinctrl-tegra-xusb.c @@ -680,7 +680,7 @@ static struct phy *tegra_xusb_padctl_xlate(struct device *dev, if (args->args_count <= 0) return ERR_PTR(-EINVAL); - if (index > ARRAY_SIZE(padctl->phys)) + if (index >= ARRAY_SIZE(padctl->phys)) return ERR_PTR(-EINVAL); return padctl->phys[index]; @@ -930,7 +930,8 @@ static int tegra_xusb_padctl_probe(struct platform_device *pdev) padctl->provider = devm_of_phy_provider_register(&pdev->dev, tegra_xusb_padctl_xlate); - if (err < 0) { + if (IS_ERR(padctl->provider)) { + err = PTR_ERR(padctl->provider); dev_err(&pdev->dev, "failed to register PHYs: %d\n", err); goto unregister; } diff --git a/drivers/pinctrl/samsung/pinctrl-exynos.c b/drivers/pinctrl/samsung/pinctrl-exynos.c index 003bfd874a6..d7154ed0b0e 100644 --- a/drivers/pinctrl/samsung/pinctrl-exynos.c +++ b/drivers/pinctrl/samsung/pinctrl-exynos.c @@ -127,14 +127,10 @@ static int exynos_irq_set_type(struct irq_data *irqd, unsigned int type) struct irq_chip *chip = irq_data_get_irq_chip(irqd); struct exynos_irq_chip *our_chip = to_exynos_irq_chip(chip); struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd); - struct samsung_pin_bank_type *bank_type = bank->type; struct samsung_pinctrl_drv_data *d = bank->drvdata; - unsigned int pin = irqd->hwirq; - unsigned int shift = EXYNOS_EINT_CON_LEN * pin; + unsigned int shift = EXYNOS_EINT_CON_LEN * irqd->hwirq; unsigned int con, trig_type; unsigned long reg_con = our_chip->eint_con + bank->eint_offset; - unsigned long flags; - unsigned int mask; switch (type) { case IRQ_TYPE_EDGE_RISING: @@ -167,8 +163,32 @@ static int exynos_irq_set_type(struct irq_data *irqd, unsigned int type) con |= trig_type << shift; writel(con, d->virt_base + reg_con); + return 0; +} + +static int exynos_irq_request_resources(struct irq_data *irqd) +{ + struct irq_chip *chip = irq_data_get_irq_chip(irqd); + struct exynos_irq_chip *our_chip = to_exynos_irq_chip(chip); + struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd); + struct samsung_pin_bank_type *bank_type = bank->type; + struct samsung_pinctrl_drv_data *d = bank->drvdata; + unsigned int shift = EXYNOS_EINT_CON_LEN * irqd->hwirq; + unsigned long reg_con = our_chip->eint_con + bank->eint_offset; + unsigned long flags; + unsigned int mask; + unsigned int con; + int ret; + + ret = gpio_lock_as_irq(&bank->gpio_chip, irqd->hwirq); + if (ret) { + dev_err(bank->gpio_chip.dev, "unable to lock pin %s-%lu IRQ\n", + bank->name, irqd->hwirq); + return ret; + } + reg_con = bank->pctl_offset + bank_type->reg_offset[PINCFG_TYPE_FUNC]; - shift = pin * bank_type->fld_width[PINCFG_TYPE_FUNC]; + shift = irqd->hwirq * bank_type->fld_width[PINCFG_TYPE_FUNC]; mask = (1 << bank_type->fld_width[PINCFG_TYPE_FUNC]) - 1; spin_lock_irqsave(&bank->slock, flags); @@ -180,9 +200,42 @@ static int exynos_irq_set_type(struct irq_data *irqd, unsigned int type) spin_unlock_irqrestore(&bank->slock, flags); + exynos_irq_unmask(irqd); + return 0; } +static void exynos_irq_release_resources(struct irq_data *irqd) +{ + struct irq_chip *chip = irq_data_get_irq_chip(irqd); + struct exynos_irq_chip *our_chip = to_exynos_irq_chip(chip); + struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd); + struct samsung_pin_bank_type *bank_type = bank->type; + struct samsung_pinctrl_drv_data *d = bank->drvdata; + unsigned int shift = EXYNOS_EINT_CON_LEN * irqd->hwirq; + unsigned long reg_con = our_chip->eint_con + bank->eint_offset; + unsigned long flags; + unsigned int mask; + unsigned int con; + + reg_con = bank->pctl_offset + bank_type->reg_offset[PINCFG_TYPE_FUNC]; + shift = irqd->hwirq * bank_type->fld_width[PINCFG_TYPE_FUNC]; + mask = (1 << bank_type->fld_width[PINCFG_TYPE_FUNC]) - 1; + + exynos_irq_mask(irqd); + + spin_lock_irqsave(&bank->slock, flags); + + con = readl(d->virt_base + reg_con); + con &= ~(mask << shift); + con |= FUNC_INPUT << shift; + writel(con, d->virt_base + reg_con); + + spin_unlock_irqrestore(&bank->slock, flags); + + gpio_unlock_as_irq(&bank->gpio_chip, irqd->hwirq); +} + /* * irq_chip for gpio interrupts. */ @@ -193,6 +246,8 @@ static struct exynos_irq_chip exynos_gpio_irq_chip = { .irq_mask = exynos_irq_mask, .irq_ack = exynos_irq_ack, .irq_set_type = exynos_irq_set_type, + .irq_request_resources = exynos_irq_request_resources, + .irq_release_resources = exynos_irq_release_resources, }, .eint_con = EXYNOS_GPIO_ECON_OFFSET, .eint_mask = EXYNOS_GPIO_EMASK_OFFSET, @@ -336,6 +391,8 @@ static struct exynos_irq_chip exynos_wkup_irq_chip = { .irq_ack = exynos_irq_ack, .irq_set_type = exynos_irq_set_type, .irq_set_wake = exynos_wkup_irq_set_wake, + .irq_request_resources = exynos_irq_request_resources, + .irq_release_resources = exynos_irq_release_resources, }, .eint_con = EXYNOS_WKUP_ECON_OFFSET, .eint_mask = EXYNOS_WKUP_EMASK_OFFSET, diff --git a/drivers/pinctrl/samsung/pinctrl-samsung.h b/drivers/pinctrl/samsung/pinctrl-samsung.h index 2b882320e8e..5cedc9d2639 100644 --- a/drivers/pinctrl/samsung/pinctrl-samsung.h +++ b/drivers/pinctrl/samsung/pinctrl-samsung.h @@ -26,6 +26,7 @@ #include <linux/gpio.h> /* pinmux function number for pin as gpio output line */ +#define FUNC_INPUT 0x0 #define FUNC_OUTPUT 0x1 /** diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7791.c b/drivers/pinctrl/sh-pfc/pfc-r8a7791.c index 576d41b459e..c6e5deba238 100644 --- a/drivers/pinctrl/sh-pfc/pfc-r8a7791.c +++ b/drivers/pinctrl/sh-pfc/pfc-r8a7791.c @@ -4509,24 +4509,24 @@ static const char * const audio_clk_groups[] = { }; static const char * const can0_groups[] = { - "can0_data_a", + "can0_data", "can0_data_b", "can0_data_c", "can0_data_d", "can0_data_e", "can0_data_f", - "can_clk_a", + "can_clk", "can_clk_b", "can_clk_c", "can_clk_d", }; static const char * const can1_groups[] = { - "can1_data_a", + "can1_data", "can1_data_b", "can1_data_c", "can1_data_d", - "can_clk_a", + "can_clk", "can_clk_b", "can_clk_c", "can_clk_d", diff --git a/drivers/platform/x86/ideapad-laptop.c b/drivers/platform/x86/ideapad-laptop.c index fc468a3d95c..02152de135b 100644 --- a/drivers/platform/x86/ideapad-laptop.c +++ b/drivers/platform/x86/ideapad-laptop.c @@ -88,7 +88,6 @@ struct ideapad_private { struct dentry *debug; unsigned long cfg; bool has_hw_rfkill_switch; - bool has_touchpad_control; }; static bool no_bt_rfkill; @@ -456,7 +455,7 @@ struct ideapad_rfk_data { int type; }; -const const struct ideapad_rfk_data ideapad_rfk_data[] = { +static const struct ideapad_rfk_data ideapad_rfk_data[] = { { "ideapad_wlan", CFG_WIFI_BIT, VPCCMD_W_WIFI, RFKILL_TYPE_WLAN }, { "ideapad_bluetooth", CFG_BT_BIT, VPCCMD_W_BT, RFKILL_TYPE_BLUETOOTH }, { "ideapad_3g", CFG_3G_BIT, VPCCMD_W_3G, RFKILL_TYPE_WWAN }, @@ -767,9 +766,6 @@ static void ideapad_sync_touchpad_state(struct ideapad_private *priv) { unsigned long value; - if (!priv->has_touchpad_control) - return; - /* Without reading from EC touchpad LED doesn't switch state */ if (!read_ec_data(priv->adev->handle, VPCCMD_R_TOUCHPAD, &value)) { /* Some IdeaPads don't really turn off touchpad - they only @@ -833,29 +829,7 @@ static void ideapad_acpi_notify(acpi_handle handle, u32 event, void *data) * always results in 0 on these models, causing ideapad_laptop to wrongly * report all radios as hardware-blocked. */ -static struct dmi_system_id no_hw_rfkill_list[] = { - { - .ident = "Lenovo Yoga 2 11 / 13 / Pro", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), - DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo Yoga 2"), - }, - }, - {} -}; - -/* - * Some models don't offer touchpad ctrl through the ideapad interface, causing - * ideapad_sync_touchpad_state to send wrong touchpad enable/disable events. - */ -static struct dmi_system_id no_touchpad_ctrl_list[] = { - { - .ident = "Lenovo Yoga 1 series", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), - DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo IdeaPad Yoga"), - }, - }, +static const struct dmi_system_id no_hw_rfkill_list[] = { { .ident = "Lenovo Yoga 2 11 / 13 / Pro", .matches = { @@ -889,7 +863,6 @@ static int ideapad_acpi_add(struct platform_device *pdev) priv->adev = adev; priv->platform_device = pdev; priv->has_hw_rfkill_switch = !dmi_check_system(no_hw_rfkill_list); - priv->has_touchpad_control = !dmi_check_system(no_touchpad_ctrl_list); ret = ideapad_sysfs_init(priv); if (ret) diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c index b062d3d7b37..d0dce734b2e 100644 --- a/drivers/platform/x86/toshiba_acpi.c +++ b/drivers/platform/x86/toshiba_acpi.c @@ -1255,10 +1255,15 @@ static ssize_t toshiba_kbd_bl_mode_store(struct device *dev, const char *buf, size_t count) { struct toshiba_acpi_dev *toshiba = dev_get_drvdata(dev); - int mode = -1; - int time = -1; + int mode; + int time; + int ret; - if (sscanf(buf, "%i", &mode) != 1 && (mode != 2 || mode != 1)) + + ret = kstrtoint(buf, 0, &mode); + if (ret) + return ret; + if (mode != SCI_KBD_MODE_FNZ && mode != SCI_KBD_MODE_AUTO) return -EINVAL; /* Set the Keyboard Backlight Mode where: @@ -1266,11 +1271,12 @@ static ssize_t toshiba_kbd_bl_mode_store(struct device *dev, * Auto - KBD backlight turns off automatically in given time * FN-Z - KBD backlight "toggles" when hotkey pressed */ - if (mode != -1 && toshiba->kbd_mode != mode) { + if (toshiba->kbd_mode != mode) { time = toshiba->kbd_time << HCI_MISC_SHIFT; time = time + toshiba->kbd_mode; - if (toshiba_kbd_illum_status_set(toshiba, time) < 0) - return -EIO; + ret = toshiba_kbd_illum_status_set(toshiba, time); + if (ret) + return ret; toshiba->kbd_mode = mode; } @@ -1857,9 +1863,16 @@ static int toshiba_acpi_resume(struct device *device) { struct toshiba_acpi_dev *dev = acpi_driver_data(to_acpi_device(device)); u32 result; + acpi_status status; + + if (dev->hotkey_dev) { + status = acpi_evaluate_object(dev->acpi_dev->handle, "ENAB", + NULL, NULL); + if (ACPI_FAILURE(status)) + pr_info("Unable to re-enable hotkeys\n"); - if (dev->hotkey_dev) hci_write1(dev, HCI_HOTKEY_EVENT, HCI_HOTKEY_ENABLE, &result); + } return 0; } diff --git a/drivers/rtc/rtc-s5m.c b/drivers/rtc/rtc-s5m.c index 8f06250a038..8754c33361e 100644 --- a/drivers/rtc/rtc-s5m.c +++ b/drivers/rtc/rtc-s5m.c @@ -717,12 +717,14 @@ static int s5m_rtc_probe(struct platform_device *pdev) info->device_type = s5m87xx->device_type; info->wtsr_smpl = s5m87xx->wtsr_smpl; - info->irq = regmap_irq_get_virq(s5m87xx->irq_data, alarm_irq); - if (info->irq <= 0) { - ret = -EINVAL; - dev_err(&pdev->dev, "Failed to get virtual IRQ %d\n", + if (s5m87xx->irq_data) { + info->irq = regmap_irq_get_virq(s5m87xx->irq_data, alarm_irq); + if (info->irq <= 0) { + ret = -EINVAL; + dev_err(&pdev->dev, "Failed to get virtual IRQ %d\n", alarm_irq); - goto err; + goto err; + } } platform_set_drvdata(pdev, info); @@ -744,6 +746,11 @@ static int s5m_rtc_probe(struct platform_device *pdev) goto err; } + if (!info->irq) { + dev_info(&pdev->dev, "Alarm IRQ not available\n"); + return 0; + } + ret = devm_request_threaded_irq(&pdev->dev, info->irq, NULL, s5m_rtc_alarm_irq, 0, "rtc-alarm0", info); @@ -802,7 +809,7 @@ static int s5m_rtc_resume(struct device *dev) struct s5m_rtc_info *info = dev_get_drvdata(dev); int ret = 0; - if (device_may_wakeup(dev)) + if (info->irq && device_may_wakeup(dev)) ret = disable_irq_wake(info->irq); return ret; @@ -813,7 +820,7 @@ static int s5m_rtc_suspend(struct device *dev) struct s5m_rtc_info *info = dev_get_drvdata(dev); int ret = 0; - if (device_may_wakeup(dev)) + if (info->irq && device_may_wakeup(dev)) ret = enable_irq_wake(info->irq); return ret; diff --git a/drivers/s390/char/con3215.c b/drivers/s390/char/con3215.c index a6d47e5eee9..c43aca69fb3 100644 --- a/drivers/s390/char/con3215.c +++ b/drivers/s390/char/con3215.c @@ -1035,12 +1035,26 @@ static int tty3215_write(struct tty_struct * tty, const unsigned char *buf, int count) { struct raw3215_info *raw; + int i, written; if (!tty) return 0; raw = (struct raw3215_info *) tty->driver_data; - raw3215_write(raw, buf, count); - return count; + written = count; + while (count > 0) { + for (i = 0; i < count; i++) + if (buf[i] == '\t' || buf[i] == '\n') + break; + raw3215_write(raw, buf, i); + count -= i; + buf += i; + if (count > 0) { + raw3215_putchar(raw, *buf); + count--; + buf++; + } + } + return written; } /* @@ -1188,7 +1202,7 @@ static int __init tty3215_init(void) driver->subtype = SYSTEM_TYPE_TTY; driver->init_termios = tty_std_termios; driver->init_termios.c_iflag = IGNBRK | IGNPAR; - driver->init_termios.c_oflag = ONLCR | XTABS; + driver->init_termios.c_oflag = ONLCR; driver->init_termios.c_lflag = ISIG; driver->flags = TTY_DRIVER_REAL_RAW; tty_set_operations(driver, &tty3215_ops); diff --git a/drivers/s390/char/sclp_tty.c b/drivers/s390/char/sclp_tty.c index 7ed7a598781..003663288e2 100644 --- a/drivers/s390/char/sclp_tty.c +++ b/drivers/s390/char/sclp_tty.c @@ -559,7 +559,7 @@ sclp_tty_init(void) driver->subtype = SYSTEM_TYPE_TTY; driver->init_termios = tty_std_termios; driver->init_termios.c_iflag = IGNBRK | IGNPAR; - driver->init_termios.c_oflag = ONLCR | XTABS; + driver->init_termios.c_oflag = ONLCR; driver->init_termios.c_lflag = ISIG | ECHO; driver->flags = TTY_DRIVER_REAL_RAW; tty_set_operations(driver, &sclp_ops); diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index ce62e8798cc..d837dc18052 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -1808,7 +1808,6 @@ static int scsi_mq_prep_fn(struct request *req) cmd->tag = req->tag; - req->cmd = req->__cmd; cmd->cmnd = req->cmd; cmd->prot_op = SCSI_PROT_NORMAL; diff --git a/drivers/spi/spi-au1550.c b/drivers/spi/spi-au1550.c index 40c3d43c929..f40b34cdf2f 100644 --- a/drivers/spi/spi-au1550.c +++ b/drivers/spi/spi-au1550.c @@ -945,7 +945,7 @@ static int au1550_spi_remove(struct platform_device *pdev) spi_bitbang_stop(&hw->bitbang); free_irq(hw->irq, hw); iounmap((void __iomem *)hw->regs); - release_mem_region(r->start, sizeof(psc_spi_t)); + release_mem_region(hw->ioarea->start, sizeof(psc_spi_t)); if (hw->usedma) { au1550_spi_dma_rxtmp_free(hw); diff --git a/drivers/spi/spi-davinci.c b/drivers/spi/spi-davinci.c index 276a3884fb3..48f1d26e6ad 100644 --- a/drivers/spi/spi-davinci.c +++ b/drivers/spi/spi-davinci.c @@ -417,16 +417,16 @@ static int davinci_spi_setup(struct spi_device *spi) flags, dev_name(&spi->dev)); internal_cs = false; } - } - if (retval) { - dev_err(&spi->dev, "GPIO %d setup failed (%d)\n", - spi->cs_gpio, retval); - return retval; - } + if (retval) { + dev_err(&spi->dev, "GPIO %d setup failed (%d)\n", + spi->cs_gpio, retval); + return retval; + } - if (internal_cs) - set_io_bits(dspi->base + SPIPC0, 1 << spi->chip_select); + if (internal_cs) + set_io_bits(dspi->base + SPIPC0, 1 << spi->chip_select); + } if (spi->mode & SPI_READY) set_io_bits(dspi->base + SPIPC0, SPIPC0_SPIENA_MASK); diff --git a/drivers/spi/spi-dw-pci.c b/drivers/spi/spi-dw-pci.c index 3f3dc1226ed..e14960470d8 100644 --- a/drivers/spi/spi-dw-pci.c +++ b/drivers/spi/spi-dw-pci.c @@ -62,6 +62,8 @@ static int spi_pci_probe(struct pci_dev *pdev, if (ret) return ret; + dws->regs = pcim_iomap_table(pdev)[pci_bar]; + dws->bus_num = 0; dws->num_cs = 4; dws->irq = pdev->irq; diff --git a/drivers/spi/spi-dw.c b/drivers/spi/spi-dw.c index 29f33143b79..670f0627f3b 100644 --- a/drivers/spi/spi-dw.c +++ b/drivers/spi/spi-dw.c @@ -271,7 +271,7 @@ static void giveback(struct dw_spi *dws) transfer_list); if (!last_transfer->cs_change) - spi_chip_sel(dws, dws->cur_msg->spi, 0); + spi_chip_sel(dws, msg->spi, 0); spi_finalize_current_message(dws->master); } diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c index 68441fa448d..352eed7463a 100644 --- a/drivers/spi/spi-omap2-mcspi.c +++ b/drivers/spi/spi-omap2-mcspi.c @@ -329,7 +329,8 @@ static void omap2_mcspi_set_fifo(const struct spi_device *spi, disable_fifo: if (t->rx_buf != NULL) chconf &= ~OMAP2_MCSPI_CHCONF_FFER; - else + + if (t->tx_buf != NULL) chconf &= ~OMAP2_MCSPI_CHCONF_FFET; mcspi_write_chconf0(spi, chconf); diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c index fe792106bdc..46f45ca2c69 100644 --- a/drivers/spi/spi-pxa2xx.c +++ b/drivers/spi/spi-pxa2xx.c @@ -1074,6 +1074,7 @@ static struct acpi_device_id pxa2xx_spi_acpi_match[] = { { "INT3430", 0 }, { "INT3431", 0 }, { "80860F0E", 0 }, + { "8086228E", 0 }, { }, }; MODULE_DEVICE_TABLE(acpi, pxa2xx_spi_acpi_match); diff --git a/drivers/spi/spi-rockchip.c b/drivers/spi/spi-rockchip.c index c0743604b90..cd0e08b0c9f 100644 --- a/drivers/spi/spi-rockchip.c +++ b/drivers/spi/spi-rockchip.c @@ -499,7 +499,7 @@ static void rockchip_spi_config(struct rockchip_spi *rs) } /* div doesn't support odd number */ - div = rs->max_freq / rs->speed; + div = max_t(u32, rs->max_freq / rs->speed, 1); div = (div + 1) & 0xfffe; spi_enable_chip(rs, 0); @@ -678,7 +678,7 @@ static int rockchip_spi_probe(struct platform_device *pdev) rs->dma_tx.addr = (dma_addr_t)(mem->start + ROCKCHIP_SPI_TXDR); rs->dma_rx.addr = (dma_addr_t)(mem->start + ROCKCHIP_SPI_RXDR); rs->dma_tx.direction = DMA_MEM_TO_DEV; - rs->dma_tx.direction = DMA_DEV_TO_MEM; + rs->dma_rx.direction = DMA_DEV_TO_MEM; master->can_dma = rockchip_spi_can_dma; master->dma_tx = rs->dma_tx.ch; diff --git a/drivers/spi/spi-rspi.c b/drivers/spi/spi-rspi.c index c850dfdfa9e..ad87a98f8f6 100644 --- a/drivers/spi/spi-rspi.c +++ b/drivers/spi/spi-rspi.c @@ -472,25 +472,52 @@ static int rspi_dma_transfer(struct rspi_data *rspi, struct sg_table *tx, dma_cookie_t cookie; int ret; - if (tx) { - desc_tx = dmaengine_prep_slave_sg(rspi->master->dma_tx, - tx->sgl, tx->nents, DMA_TO_DEVICE, - DMA_PREP_INTERRUPT | DMA_CTRL_ACK); - if (!desc_tx) - goto no_dma; - - irq_mask |= SPCR_SPTIE; - } + /* First prepare and submit the DMA request(s), as this may fail */ if (rx) { desc_rx = dmaengine_prep_slave_sg(rspi->master->dma_rx, rx->sgl, rx->nents, DMA_FROM_DEVICE, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); - if (!desc_rx) - goto no_dma; + if (!desc_rx) { + ret = -EAGAIN; + goto no_dma_rx; + } + + desc_rx->callback = rspi_dma_complete; + desc_rx->callback_param = rspi; + cookie = dmaengine_submit(desc_rx); + if (dma_submit_error(cookie)) { + ret = cookie; + goto no_dma_rx; + } irq_mask |= SPCR_SPRIE; } + if (tx) { + desc_tx = dmaengine_prep_slave_sg(rspi->master->dma_tx, + tx->sgl, tx->nents, DMA_TO_DEVICE, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!desc_tx) { + ret = -EAGAIN; + goto no_dma_tx; + } + + if (rx) { + /* No callback */ + desc_tx->callback = NULL; + } else { + desc_tx->callback = rspi_dma_complete; + desc_tx->callback_param = rspi; + } + cookie = dmaengine_submit(desc_tx); + if (dma_submit_error(cookie)) { + ret = cookie; + goto no_dma_tx; + } + + irq_mask |= SPCR_SPTIE; + } + /* * DMAC needs SPxIE, but if SPxIE is set, the IRQ routine will be * called. So, this driver disables the IRQ while DMA transfer. @@ -503,34 +530,24 @@ static int rspi_dma_transfer(struct rspi_data *rspi, struct sg_table *tx, rspi_enable_irq(rspi, irq_mask); rspi->dma_callbacked = 0; - if (rx) { - desc_rx->callback = rspi_dma_complete; - desc_rx->callback_param = rspi; - cookie = dmaengine_submit(desc_rx); - if (dma_submit_error(cookie)) - return cookie; + /* Now start DMA */ + if (rx) dma_async_issue_pending(rspi->master->dma_rx); - } - if (tx) { - if (rx) { - /* No callback */ - desc_tx->callback = NULL; - } else { - desc_tx->callback = rspi_dma_complete; - desc_tx->callback_param = rspi; - } - cookie = dmaengine_submit(desc_tx); - if (dma_submit_error(cookie)) - return cookie; + if (tx) dma_async_issue_pending(rspi->master->dma_tx); - } ret = wait_event_interruptible_timeout(rspi->wait, rspi->dma_callbacked, HZ); if (ret > 0 && rspi->dma_callbacked) ret = 0; - else if (!ret) + else if (!ret) { + dev_err(&rspi->master->dev, "DMA timeout\n"); ret = -ETIMEDOUT; + if (tx) + dmaengine_terminate_all(rspi->master->dma_tx); + if (rx) + dmaengine_terminate_all(rspi->master->dma_rx); + } rspi_disable_irq(rspi, irq_mask); @@ -541,11 +558,16 @@ static int rspi_dma_transfer(struct rspi_data *rspi, struct sg_table *tx, return ret; -no_dma: - pr_warn_once("%s %s: DMA not available, falling back to PIO\n", - dev_driver_string(&rspi->master->dev), - dev_name(&rspi->master->dev)); - return -EAGAIN; +no_dma_tx: + if (rx) + dmaengine_terminate_all(rspi->master->dma_rx); +no_dma_rx: + if (ret == -EAGAIN) { + pr_warn_once("%s %s: DMA not available, falling back to PIO\n", + dev_driver_string(&rspi->master->dev), + dev_name(&rspi->master->dev)); + } + return ret; } static void rspi_receive_init(const struct rspi_data *rspi) diff --git a/drivers/spi/spi-sh-msiof.c b/drivers/spi/spi-sh-msiof.c index 2a4354dcd66..543075b80f1 100644 --- a/drivers/spi/spi-sh-msiof.c +++ b/drivers/spi/spi-sh-msiof.c @@ -636,48 +636,38 @@ static int sh_msiof_dma_once(struct sh_msiof_spi_priv *p, const void *tx, dma_cookie_t cookie; int ret; - if (tx) { - ier_bits |= IER_TDREQE | IER_TDMAE; - dma_sync_single_for_device(p->master->dma_tx->device->dev, - p->tx_dma_addr, len, DMA_TO_DEVICE); - desc_tx = dmaengine_prep_slave_single(p->master->dma_tx, - p->tx_dma_addr, len, DMA_TO_DEVICE, - DMA_PREP_INTERRUPT | DMA_CTRL_ACK); - if (!desc_tx) - return -EAGAIN; - } - + /* First prepare and submit the DMA request(s), as this may fail */ if (rx) { ier_bits |= IER_RDREQE | IER_RDMAE; desc_rx = dmaengine_prep_slave_single(p->master->dma_rx, p->rx_dma_addr, len, DMA_FROM_DEVICE, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); - if (!desc_rx) - return -EAGAIN; - } - - /* 1 stage FIFO watermarks for DMA */ - sh_msiof_write(p, FCTR, FCTR_TFWM_1 | FCTR_RFWM_1); - - /* setup msiof transfer mode registers (32-bit words) */ - sh_msiof_spi_set_mode_regs(p, tx, rx, 32, len / 4); - - sh_msiof_write(p, IER, ier_bits); - - reinit_completion(&p->done); + if (!desc_rx) { + ret = -EAGAIN; + goto no_dma_rx; + } - if (rx) { desc_rx->callback = sh_msiof_dma_complete; desc_rx->callback_param = p; cookie = dmaengine_submit(desc_rx); if (dma_submit_error(cookie)) { ret = cookie; - goto stop_ier; + goto no_dma_rx; } - dma_async_issue_pending(p->master->dma_rx); } if (tx) { + ier_bits |= IER_TDREQE | IER_TDMAE; + dma_sync_single_for_device(p->master->dma_tx->device->dev, + p->tx_dma_addr, len, DMA_TO_DEVICE); + desc_tx = dmaengine_prep_slave_single(p->master->dma_tx, + p->tx_dma_addr, len, DMA_TO_DEVICE, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!desc_tx) { + ret = -EAGAIN; + goto no_dma_tx; + } + if (rx) { /* No callback */ desc_tx->callback = NULL; @@ -688,15 +678,30 @@ static int sh_msiof_dma_once(struct sh_msiof_spi_priv *p, const void *tx, cookie = dmaengine_submit(desc_tx); if (dma_submit_error(cookie)) { ret = cookie; - goto stop_rx; + goto no_dma_tx; } - dma_async_issue_pending(p->master->dma_tx); } + /* 1 stage FIFO watermarks for DMA */ + sh_msiof_write(p, FCTR, FCTR_TFWM_1 | FCTR_RFWM_1); + + /* setup msiof transfer mode registers (32-bit words) */ + sh_msiof_spi_set_mode_regs(p, tx, rx, 32, len / 4); + + sh_msiof_write(p, IER, ier_bits); + + reinit_completion(&p->done); + + /* Now start DMA */ + if (rx) + dma_async_issue_pending(p->master->dma_rx); + if (tx) + dma_async_issue_pending(p->master->dma_tx); + ret = sh_msiof_spi_start(p, rx); if (ret) { dev_err(&p->pdev->dev, "failed to start hardware\n"); - goto stop_tx; + goto stop_dma; } /* wait for tx fifo to be emptied / rx fifo to be filled */ @@ -726,14 +731,14 @@ static int sh_msiof_dma_once(struct sh_msiof_spi_priv *p, const void *tx, stop_reset: sh_msiof_reset_str(p); sh_msiof_spi_stop(p, rx); -stop_tx: +stop_dma: if (tx) dmaengine_terminate_all(p->master->dma_tx); -stop_rx: +no_dma_tx: if (rx) dmaengine_terminate_all(p->master->dma_rx); -stop_ier: sh_msiof_write(p, IER, 0); +no_dma_rx: return ret; } diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index e0531baf278..ca935df80c8 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -848,6 +848,7 @@ out: /** * spi_finalize_current_transfer - report completion of a transfer + * @master: the master reporting completion * * Called by SPI drivers using the core transfer_one_message() * implementation to notify it that the current interrupt driven diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig index 2c486ea6236..35b494f5667 100644 --- a/drivers/staging/Kconfig +++ b/drivers/staging/Kconfig @@ -28,8 +28,6 @@ source "drivers/staging/et131x/Kconfig" source "drivers/staging/slicoss/Kconfig" -source "drivers/staging/usbip/Kconfig" - source "drivers/staging/wlan-ng/Kconfig" source "drivers/staging/comedi/Kconfig" diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile index 1e1a3a10faf..e66a5dbd9b0 100644 --- a/drivers/staging/Makefile +++ b/drivers/staging/Makefile @@ -6,7 +6,6 @@ obj-$(CONFIG_STAGING) += staging.o obj-y += media/ obj-$(CONFIG_ET131X) += et131x/ obj-$(CONFIG_SLICOSS) += slicoss/ -obj-$(CONFIG_USBIP_CORE) += usbip/ obj-$(CONFIG_PRISM2_USB) += wlan-ng/ obj-$(CONFIG_COMEDI) += comedi/ obj-$(CONFIG_FB_OLPC_DCON) += olpc_dcon/ diff --git a/drivers/staging/android/logger.c b/drivers/staging/android/logger.c index 9b47e66599a..0bf0d24d12d 100644 --- a/drivers/staging/android/logger.c +++ b/drivers/staging/android/logger.c @@ -790,7 +790,7 @@ static int __init create_log(char *log_name, int size) if (unlikely(ret)) { pr_err("failed to register misc device for log '%s'!\n", log->misc.name); - goto out_free_log; + goto out_free_misc_name; } pr_info("created %luK log '%s'\n", @@ -798,6 +798,9 @@ static int __init create_log(char *log_name, int size) return 0; +out_free_misc_name: + kfree(log->misc.name); + out_free_log: kfree(log); diff --git a/drivers/staging/et131x/et131x.c b/drivers/staging/et131x/et131x.c index 8bf1eb48516..831b7c6fe49 100644 --- a/drivers/staging/et131x/et131x.c +++ b/drivers/staging/et131x/et131x.c @@ -1421,22 +1421,16 @@ static int et131x_mii_read(struct et131x_adapter *adapter, u8 reg, u16 *value) * @reg: the register to read * @value: 16-bit value to write */ -static int et131x_mii_write(struct et131x_adapter *adapter, u8 reg, u16 value) +static int et131x_mii_write(struct et131x_adapter *adapter, u8 addr, u8 reg, + u16 value) { struct mac_regs __iomem *mac = &adapter->regs->mac; - struct phy_device *phydev = adapter->phydev; int status = 0; - u8 addr; u32 delay = 0; u32 mii_addr; u32 mii_cmd; u32 mii_indicator; - if (!phydev) - return -EIO; - - addr = phydev->addr; - /* Save a local copy of the registers we are dealing with so we can * set them back */ @@ -1631,17 +1625,7 @@ static int et131x_mdio_write(struct mii_bus *bus, int phy_addr, struct net_device *netdev = bus->priv; struct et131x_adapter *adapter = netdev_priv(netdev); - return et131x_mii_write(adapter, reg, value); -} - -static int et131x_mdio_reset(struct mii_bus *bus) -{ - struct net_device *netdev = bus->priv; - struct et131x_adapter *adapter = netdev_priv(netdev); - - et131x_mii_write(adapter, MII_BMCR, BMCR_RESET); - - return 0; + return et131x_mii_write(adapter, phy_addr, reg, value); } /* et1310_phy_power_switch - PHY power control @@ -1656,18 +1640,20 @@ static int et131x_mdio_reset(struct mii_bus *bus) static void et1310_phy_power_switch(struct et131x_adapter *adapter, bool down) { u16 data; + struct phy_device *phydev = adapter->phydev; et131x_mii_read(adapter, MII_BMCR, &data); data &= ~BMCR_PDOWN; if (down) data |= BMCR_PDOWN; - et131x_mii_write(adapter, MII_BMCR, data); + et131x_mii_write(adapter, phydev->addr, MII_BMCR, data); } /* et131x_xcvr_init - Init the phy if we are setting it into force mode */ static void et131x_xcvr_init(struct et131x_adapter *adapter) { u16 lcr2; + struct phy_device *phydev = adapter->phydev; /* Set the LED behavior such that LED 1 indicates speed (off = * 10Mbits, blink = 100Mbits, on = 1000Mbits) and LED 2 indicates @@ -1688,7 +1674,7 @@ static void et131x_xcvr_init(struct et131x_adapter *adapter) else lcr2 |= (LED_VAL_LINKON << LED_TXRX_SHIFT); - et131x_mii_write(adapter, PHY_LED_2, lcr2); + et131x_mii_write(adapter, phydev->addr, PHY_LED_2, lcr2); } } @@ -3643,14 +3629,14 @@ static void et131x_adjust_link(struct net_device *netdev) et131x_mii_read(adapter, PHY_MPHY_CONTROL_REG, ®ister18); - et131x_mii_write(adapter, PHY_MPHY_CONTROL_REG, - register18 | 0x4); - et131x_mii_write(adapter, PHY_INDEX_REG, + et131x_mii_write(adapter, phydev->addr, + PHY_MPHY_CONTROL_REG, register18 | 0x4); + et131x_mii_write(adapter, phydev->addr, PHY_INDEX_REG, register18 | 0x8402); - et131x_mii_write(adapter, PHY_DATA_REG, + et131x_mii_write(adapter, phydev->addr, PHY_DATA_REG, register18 | 511); - et131x_mii_write(adapter, PHY_MPHY_CONTROL_REG, - register18); + et131x_mii_write(adapter, phydev->addr, + PHY_MPHY_CONTROL_REG, register18); } et1310_config_flow_control(adapter); @@ -3662,7 +3648,8 @@ static void et131x_adjust_link(struct net_device *netdev) et131x_mii_read(adapter, PHY_CONFIG, ®); reg &= ~ET_PHY_CONFIG_TX_FIFO_DEPTH; reg |= ET_PHY_CONFIG_FIFO_DEPTH_32; - et131x_mii_write(adapter, PHY_CONFIG, reg); + et131x_mii_write(adapter, phydev->addr, PHY_CONFIG, + reg); } et131x_set_rx_dma_timer(adapter); @@ -3675,14 +3662,14 @@ static void et131x_adjust_link(struct net_device *netdev) et131x_mii_read(adapter, PHY_MPHY_CONTROL_REG, ®ister18); - et131x_mii_write(adapter, PHY_MPHY_CONTROL_REG, - register18 | 0x4); - et131x_mii_write(adapter, PHY_INDEX_REG, - register18 | 0x8402); - et131x_mii_write(adapter, PHY_DATA_REG, - register18 | 511); - et131x_mii_write(adapter, PHY_MPHY_CONTROL_REG, - register18); + et131x_mii_write(adapter, phydev->addr, + PHY_MPHY_CONTROL_REG, register18 | 0x4); + et131x_mii_write(adapter, phydev->addr, + PHY_INDEX_REG, register18 | 0x8402); + et131x_mii_write(adapter, phydev->addr, + PHY_DATA_REG, register18 | 511); + et131x_mii_write(adapter, phydev->addr, + PHY_MPHY_CONTROL_REG, register18); } /* Free the packets being actively sent & stopped */ @@ -4644,10 +4631,6 @@ static int et131x_pci_setup(struct pci_dev *pdev, /* Copy address into the net_device struct */ memcpy(netdev->dev_addr, adapter->addr, ETH_ALEN); - /* Init variable for counting how long we do not have link status */ - adapter->boot_coma = 0; - et1310_disable_phy_coma(adapter); - rc = -ENOMEM; /* Setup the mii_bus struct */ @@ -4663,7 +4646,6 @@ static int et131x_pci_setup(struct pci_dev *pdev, adapter->mii_bus->priv = netdev; adapter->mii_bus->read = et131x_mdio_read; adapter->mii_bus->write = et131x_mdio_write; - adapter->mii_bus->reset = et131x_mdio_reset; adapter->mii_bus->irq = kmalloc_array(PHY_MAX_ADDR, sizeof(int), GFP_KERNEL); if (!adapter->mii_bus->irq) @@ -4687,6 +4669,10 @@ static int et131x_pci_setup(struct pci_dev *pdev, /* Setup et1310 as per the documentation */ et131x_adapter_setup(adapter); + /* Init variable for counting how long we do not have link status */ + adapter->boot_coma = 0; + et1310_disable_phy_coma(adapter); + /* We can enable interrupts now * * NOTE - Because registration of interrupt handler is done in the diff --git a/drivers/staging/lustre/lustre/libcfs/workitem.c b/drivers/staging/lustre/lustre/libcfs/workitem.c index 65629579bd7..03ab9e04678 100644 --- a/drivers/staging/lustre/lustre/libcfs/workitem.c +++ b/drivers/staging/lustre/lustre/libcfs/workitem.c @@ -365,6 +365,7 @@ cfs_wi_sched_create(char *name, struct cfs_cpt_table *cptab, return -ENOMEM; strncpy(sched->ws_name, name, CFS_WS_NAME_LEN); + sched->ws_name[CFS_WS_NAME_LEN - 1] = '\0'; sched->ws_cptab = cptab; sched->ws_cpt = cpt; diff --git a/drivers/staging/lustre/lustre/obdclass/class_obd.c b/drivers/staging/lustre/lustre/obdclass/class_obd.c index 8b19f3caa68..701c6a77652 100644 --- a/drivers/staging/lustre/lustre/obdclass/class_obd.c +++ b/drivers/staging/lustre/lustre/obdclass/class_obd.c @@ -35,7 +35,7 @@ */ #define DEBUG_SUBSYSTEM S_CLASS -# include <asm/atomic.h> +# include <linux/atomic.h> #include "../include/obd_support.h" #include "../include/obd_class.h" diff --git a/drivers/staging/rtl8188eu/os_dep/usb_intf.c b/drivers/staging/rtl8188eu/os_dep/usb_intf.c index b8676ac77b0..407a318b09d 100644 --- a/drivers/staging/rtl8188eu/os_dep/usb_intf.c +++ b/drivers/staging/rtl8188eu/os_dep/usb_intf.c @@ -43,9 +43,11 @@ static struct usb_device_id rtw_usb_id_tbl[] = { {USB_DEVICE(USB_VENDER_ID_REALTEK, 0x0179)}, /* 8188ETV */ /*=== Customer ID ===*/ /****** 8188EUS ********/ + {USB_DEVICE(0x056e, 0x4008)}, /* Elecom WDC-150SU2M */ {USB_DEVICE(0x07b8, 0x8179)}, /* Abocom - Abocom */ {USB_DEVICE(0x2001, 0x330F)}, /* DLink DWA-125 REV D1 */ {USB_DEVICE(0x2001, 0x3310)}, /* Dlink DWA-123 REV D1 */ + {USB_DEVICE(0x0df6, 0x0076)}, /* Sitecom N150 v2 */ {} /* Terminating entry */ }; diff --git a/drivers/staging/usbip/uapi/usbip.h b/drivers/staging/usbip/uapi/usbip.h deleted file mode 100644 index fa5db30ede3..00000000000 --- a/drivers/staging/usbip/uapi/usbip.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * usbip.h - * - * USBIP uapi defines and function prototypes etc. -*/ - -#ifndef _UAPI_LINUX_USBIP_H -#define _UAPI_LINUX_USBIP_H - -/* usbip device status - exported in usbip device sysfs status */ -enum usbip_device_status { - /* sdev is available. */ - SDEV_ST_AVAILABLE = 0x01, - /* sdev is now used. */ - SDEV_ST_USED, - /* sdev is unusable because of a fatal error. */ - SDEV_ST_ERROR, - - /* vdev does not connect a remote device. */ - VDEV_ST_NULL, - /* vdev is used, but the USB address is not assigned yet */ - VDEV_ST_NOTASSIGNED, - VDEV_ST_USED, - VDEV_ST_ERROR -}; -#endif /* _UAPI_LINUX_USBIP_H */ diff --git a/drivers/staging/usbip/userspace/.gitignore b/drivers/staging/usbip/userspace/.gitignore deleted file mode 100644 index 9aad9e30a8b..00000000000 --- a/drivers/staging/usbip/userspace/.gitignore +++ /dev/null @@ -1,28 +0,0 @@ -Makefile -Makefile.in -aclocal.m4 -autom4te.cache/ -config.guess -config.h -config.h.in -config.log -config.status -config.sub -configure -depcomp -install-sh -libsrc/Makefile -libsrc/Makefile.in -libtool -ltmain.sh -missing -src/Makefile -src/Makefile.in -stamp-h1 -libsrc/libusbip.la -libsrc/libusbip_la-names.lo -libsrc/libusbip_la-usbip_common.lo -libsrc/libusbip_la-usbip_host_driver.lo -libsrc/libusbip_la-vhci_driver.lo -src/usbip -src/usbipd diff --git a/drivers/staging/usbip/userspace/AUTHORS b/drivers/staging/usbip/userspace/AUTHORS deleted file mode 100644 index a27ea8d03ae..00000000000 --- a/drivers/staging/usbip/userspace/AUTHORS +++ /dev/null @@ -1,3 +0,0 @@ -Takahiro Hirofuchi -Robert Leibl -matt mooney <mfm@muteddisk.com> diff --git a/drivers/staging/usbip/userspace/COPYING b/drivers/staging/usbip/userspace/COPYING deleted file mode 100644 index c5611e48a8e..00000000000 --- a/drivers/staging/usbip/userspace/COPYING +++ /dev/null @@ -1,340 +0,0 @@ - GNU GENERAL PUBLIC LICENSE - Version 2, June 1991 - - Copyright (C) 1989, 1991 Free Software Foundation, Inc. - 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA - Everyone is permitted to copy and distribute verbatim copies - of this license document, but changing it is not allowed. - - Preamble - - The licenses for most software are designed to take away your -freedom to share and change it. By contrast, the GNU General Public -License is intended to guarantee your freedom to share and change free -software--to make sure the software is free for all its users. This -General Public License applies to most of the Free Software -Foundation's software and to any other program whose authors commit to -using it. (Some other Free Software Foundation software is covered by -the GNU Library General Public License instead.) You can apply it to -your programs, too. - - When we speak of free software, we are referring to freedom, not -price. Our General Public Licenses are designed to make sure that you -have the freedom to distribute copies of free software (and charge for -this service if you wish), that you receive source code or can get it -if you want it, that you can change the software or use pieces of it -in new free programs; and that you know you can do these things. - - To protect your rights, we need to make restrictions that forbid -anyone to deny you these rights or to ask you to surrender the rights. -These restrictions translate to certain responsibilities for you if you -distribute copies of the software, or if you modify it. - - For example, if you distribute copies of such a program, whether -gratis or for a fee, you must give the recipients all the rights that -you have. You must make sure that they, too, receive or can get the -source code. And you must show them these terms so they know their -rights. - - We protect your rights with two steps: (1) copyright the software, and -(2) offer you this license which gives you legal permission to copy, -distribute and/or modify the software. - - Also, for each author's protection and ours, we want to make certain -that everyone understands that there is no warranty for this free -software. If the software is modified by someone else and passed on, we -want its recipients to know that what they have is not the original, so -that any problems introduced by others will not reflect on the original -authors' reputations. - - Finally, any free program is threatened constantly by software -patents. We wish to avoid the danger that redistributors of a free -program will individually obtain patent licenses, in effect making the -program proprietary. To prevent this, we have made it clear that any -patent must be licensed for everyone's free use or not licensed at all. - - The precise terms and conditions for copying, distribution and -modification follow. - - GNU GENERAL PUBLIC LICENSE - TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION - - 0. This License applies to any program or other work which contains -a notice placed by the copyright holder saying it may be distributed -under the terms of this General Public License. The "Program", below, -refers to any such program or work, and a "work based on the Program" -means either the Program or any derivative work under copyright law: -that is to say, a work containing the Program or a portion of it, -either verbatim or with modifications and/or translated into another -language. (Hereinafter, translation is included without limitation in -the term "modification".) Each licensee is addressed as "you". - -Activities other than copying, distribution and modification are not -covered by this License; they are outside its scope. The act of -running the Program is not restricted, and the output from the Program -is covered only if its contents constitute a work based on the -Program (independent of having been made by running the Program). -Whether that is true depends on what the Program does. - - 1. You may copy and distribute verbatim copies of the Program's -source code as you receive it, in any medium, provided that you -conspicuously and appropriately publish on each copy an appropriate -copyright notice and disclaimer of warranty; keep intact all the -notices that refer to this License and to the absence of any warranty; -and give any other recipients of the Program a copy of this License -along with the Program. - -You may charge a fee for the physical act of transferring a copy, and -you may at your option offer warranty protection in exchange for a fee. - - 2. You may modify your copy or copies of the Program or any portion -of it, thus forming a work based on the Program, and copy and -distribute such modifications or work under the terms of Section 1 -above, provided that you also meet all of these conditions: - - a) You must cause the modified files to carry prominent notices - stating that you changed the files and the date of any change. - - b) You must cause any work that you distribute or publish, that in - whole or in part contains or is derived from the Program or any - part thereof, to be licensed as a whole at no charge to all third - parties under the terms of this License. - - c) If the modified program normally reads commands interactively - when run, you must cause it, when started running for such - interactive use in the most ordinary way, to print or display an - announcement including an appropriate copyright notice and a - notice that there is no warranty (or else, saying that you provide - a warranty) and that users may redistribute the program under - these conditions, and telling the user how to view a copy of this - License. (Exception: if the Program itself is interactive but - does not normally print such an announcement, your work based on - the Program is not required to print an announcement.) - -These requirements apply to the modified work as a whole. If -identifiable sections of that work are not derived from the Program, -and can be reasonably considered independent and separate works in -themselves, then this License, and its terms, do not apply to those -sections when you distribute them as separate works. But when you -distribute the same sections as part of a whole which is a work based -on the Program, the distribution of the whole must be on the terms of -this License, whose permissions for other licensees extend to the -entire whole, and thus to each and every part regardless of who wrote it. - -Thus, it is not the intent of this section to claim rights or contest -your rights to work written entirely by you; rather, the intent is to -exercise the right to control the distribution of derivative or -collective works based on the Program. - -In addition, mere aggregation of another work not based on the Program -with the Program (or with a work based on the Program) on a volume of -a storage or distribution medium does not bring the other work under -the scope of this License. - - 3. You may copy and distribute the Program (or a work based on it, -under Section 2) in object code or executable form under the terms of -Sections 1 and 2 above provided that you also do one of the following: - - a) Accompany it with the complete corresponding machine-readable - source code, which must be distributed under the terms of Sections - 1 and 2 above on a medium customarily used for software interchange; or, - - b) Accompany it with a written offer, valid for at least three - years, to give any third party, for a charge no more than your - cost of physically performing source distribution, a complete - machine-readable copy of the corresponding source code, to be - distributed under the terms of Sections 1 and 2 above on a medium - customarily used for software interchange; or, - - c) Accompany it with the information you received as to the offer - to distribute corresponding source code. (This alternative is - allowed only for noncommercial distribution and only if you - received the program in object code or executable form with such - an offer, in accord with Subsection b above.) - -The source code for a work means the preferred form of the work for -making modifications to it. For an executable work, complete source -code means all the source code for all modules it contains, plus any -associated interface definition files, plus the scripts used to -control compilation and installation of the executable. However, as a -special exception, the source code distributed need not include -anything that is normally distributed (in either source or binary -form) with the major components (compiler, kernel, and so on) of the -operating system on which the executable runs, unless that component -itself accompanies the executable. - -If distribution of executable or object code is made by offering -access to copy from a designated place, then offering equivalent -access to copy the source code from the same place counts as -distribution of the source code, even though third parties are not -compelled to copy the source along with the object code. - - 4. You may not copy, modify, sublicense, or distribute the Program -except as expressly provided under this License. Any attempt -otherwise to copy, modify, sublicense or distribute the Program is -void, and will automatically terminate your rights under this License. -However, parties who have received copies, or rights, from you under -this License will not have their licenses terminated so long as such -parties remain in full compliance. - - 5. You are not required to accept this License, since you have not -signed it. However, nothing else grants you permission to modify or -distribute the Program or its derivative works. These actions are -prohibited by law if you do not accept this License. Therefore, by -modifying or distributing the Program (or any work based on the -Program), you indicate your acceptance of this License to do so, and -all its terms and conditions for copying, distributing or modifying -the Program or works based on it. - - 6. Each time you redistribute the Program (or any work based on the -Program), the recipient automatically receives a license from the -original licensor to copy, distribute or modify the Program subject to -these terms and conditions. You may not impose any further -restrictions on the recipients' exercise of the rights granted herein. -You are not responsible for enforcing compliance by third parties to -this License. - - 7. If, as a consequence of a court judgment or allegation of patent -infringement or for any other reason (not limited to patent issues), -conditions are imposed on you (whether by court order, agreement or -otherwise) that contradict the conditions of this License, they do not -excuse you from the conditions of this License. If you cannot -distribute so as to satisfy simultaneously your obligations under this -License and any other pertinent obligations, then as a consequence you -may not distribute the Program at all. For example, if a patent -license would not permit royalty-free redistribution of the Program by -all those who receive copies directly or indirectly through you, then -the only way you could satisfy both it and this License would be to -refrain entirely from distribution of the Program. - -If any portion of this section is held invalid or unenforceable under -any particular circumstance, the balance of the section is intended to -apply and the section as a whole is intended to apply in other -circumstances. - -It is not the purpose of this section to induce you to infringe any -patents or other property right claims or to contest validity of any -such claims; this section has the sole purpose of protecting the -integrity of the free software distribution system, which is -implemented by public license practices. Many people have made -generous contributions to the wide range of software distributed -through that system in reliance on consistent application of that -system; it is up to the author/donor to decide if he or she is willing -to distribute software through any other system and a licensee cannot -impose that choice. - -This section is intended to make thoroughly clear what is believed to -be a consequence of the rest of this License. - - 8. If the distribution and/or use of the Program is restricted in -certain countries either by patents or by copyrighted interfaces, the -original copyright holder who places the Program under this License -may add an explicit geographical distribution limitation excluding -those countries, so that distribution is permitted only in or among -countries not thus excluded. In such case, this License incorporates -the limitation as if written in the body of this License. - - 9. The Free Software Foundation may publish revised and/or new versions -of the General Public License from time to time. Such new versions will -be similar in spirit to the present version, but may differ in detail to -address new problems or concerns. - -Each version is given a distinguishing version number. If the Program -specifies a version number of this License which applies to it and "any -later version", you have the option of following the terms and conditions -either of that version or of any later version published by the Free -Software Foundation. If the Program does not specify a version number of -this License, you may choose any version ever published by the Free Software -Foundation. - - 10. If you wish to incorporate parts of the Program into other free -programs whose distribution conditions are different, write to the author -to ask for permission. For software which is copyrighted by the Free -Software Foundation, write to the Free Software Foundation; we sometimes -make exceptions for this. Our decision will be guided by the two goals -of preserving the free status of all derivatives of our free software and -of promoting the sharing and reuse of software generally. - - NO WARRANTY - - 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY -FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN -OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES -PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED -OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS -TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE -PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, -REPAIR OR CORRECTION. - - 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING -WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR -REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, -INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING -OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED -TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY -YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER -PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE -POSSIBILITY OF SUCH DAMAGES. - - END OF TERMS AND CONDITIONS - - How to Apply These Terms to Your New Programs - - If you develop a new program, and you want it to be of the greatest -possible use to the public, the best way to achieve this is to make it -free software which everyone can redistribute and change under these terms. - - To do so, attach the following notices to the program. It is safest -to attach them to the start of each source file to most effectively -convey the exclusion of warranty; and each file should have at least -the "copyright" line and a pointer to where the full notice is found. - - <one line to give the program's name and a brief idea of what it does.> - Copyright (C) <year> <name of author> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA - - -Also add information on how to contact you by electronic and paper mail. - -If the program is interactive, make it output a short notice like this -when it starts in an interactive mode: - - Gnomovision version 69, Copyright (C) year name of author - Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. - This is free software, and you are welcome to redistribute it - under certain conditions; type `show c' for details. - -The hypothetical commands `show w' and `show c' should show the appropriate -parts of the General Public License. Of course, the commands you use may -be called something other than `show w' and `show c'; they could even be -mouse-clicks or menu items--whatever suits your program. - -You should also get your employer (if you work as a programmer) or your -school, if any, to sign a "copyright disclaimer" for the program, if -necessary. Here is a sample; alter the names: - - Yoyodyne, Inc., hereby disclaims all copyright interest in the program - `Gnomovision' (which makes passes at compilers) written by James Hacker. - - <signature of Ty Coon>, 1 April 1989 - Ty Coon, President of Vice - -This General Public License does not permit incorporating your program into -proprietary programs. If your program is a subroutine library, you may -consider it more useful to permit linking proprietary applications with the -library. If this is what you want to do, use the GNU Library General -Public License instead of this License. diff --git a/drivers/staging/usbip/userspace/INSTALL b/drivers/staging/usbip/userspace/INSTALL deleted file mode 100644 index d3c5b40a940..00000000000 --- a/drivers/staging/usbip/userspace/INSTALL +++ /dev/null @@ -1,237 +0,0 @@ -Installation Instructions -************************* - -Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005, -2006, 2007 Free Software Foundation, Inc. - -This file is free documentation; the Free Software Foundation gives -unlimited permission to copy, distribute and modify it. - -Basic Installation -================== - -Briefly, the shell commands `./configure; make; make install' should -configure, build, and install this package. The following -more-detailed instructions are generic; see the `README' file for -instructions specific to this package. - - The `configure' shell script attempts to guess correct values for -various system-dependent variables used during compilation. It uses -those values to create a `Makefile' in each directory of the package. -It may also create one or more `.h' files containing system-dependent -definitions. Finally, it creates a shell script `config.status' that -you can run in the future to recreate the current configuration, and a -file `config.log' containing compiler output (useful mainly for -debugging `configure'). - - It can also use an optional file (typically called `config.cache' -and enabled with `--cache-file=config.cache' or simply `-C') that saves -the results of its tests to speed up reconfiguring. Caching is -disabled by default to prevent problems with accidental use of stale -cache files. - - If you need to do unusual things to compile the package, please try -to figure out how `configure' could check whether to do them, and mail -diffs or instructions to the address given in the `README' so they can -be considered for the next release. If you are using the cache, and at -some point `config.cache' contains results you don't want to keep, you -may remove or edit it. - - The file `configure.ac' (or `configure.in') is used to create -`configure' by a program called `autoconf'. You need `configure.ac' if -you want to change it or regenerate `configure' using a newer version -of `autoconf'. - -The simplest way to compile this package is: - - 1. `cd' to the directory containing the package's source code and type - `./configure' to configure the package for your system. - - Running `configure' might take a while. While running, it prints - some messages telling which features it is checking for. - - 2. Type `make' to compile the package. - - 3. Optionally, type `make check' to run any self-tests that come with - the package. - - 4. Type `make install' to install the programs and any data files and - documentation. - - 5. You can remove the program binaries and object files from the - source code directory by typing `make clean'. To also remove the - files that `configure' created (so you can compile the package for - a different kind of computer), type `make distclean'. There is - also a `make maintainer-clean' target, but that is intended mainly - for the package's developers. If you use it, you may have to get - all sorts of other programs in order to regenerate files that came - with the distribution. - - 6. Often, you can also type `make uninstall' to remove the installed - files again. - -Compilers and Options -===================== - -Some systems require unusual options for compilation or linking that the -`configure' script does not know about. Run `./configure --help' for -details on some of the pertinent environment variables. - - You can give `configure' initial values for configuration parameters -by setting variables in the command line or in the environment. Here -is an example: - - ./configure CC=c99 CFLAGS=-g LIBS=-lposix - - *Note Defining Variables::, for more details. - -Compiling For Multiple Architectures -==================================== - -You can compile the package for more than one kind of computer at the -same time, by placing the object files for each architecture in their -own directory. To do this, you can use GNU `make'. `cd' to the -directory where you want the object files and executables to go and run -the `configure' script. `configure' automatically checks for the -source code in the directory that `configure' is in and in `..'. - - With a non-GNU `make', it is safer to compile the package for one -architecture at a time in the source code directory. After you have -installed the package for one architecture, use `make distclean' before -reconfiguring for another architecture. - -Installation Names -================== - -By default, `make install' installs the package's commands under -`/usr/local/bin', include files under `/usr/local/include', etc. You -can specify an installation prefix other than `/usr/local' by giving -`configure' the option `--prefix=PREFIX'. - - You can specify separate installation prefixes for -architecture-specific files and architecture-independent files. If you -pass the option `--exec-prefix=PREFIX' to `configure', the package uses -PREFIX as the prefix for installing programs and libraries. -Documentation and other data files still use the regular prefix. - - In addition, if you use an unusual directory layout you can give -options like `--bindir=DIR' to specify different values for particular -kinds of files. Run `configure --help' for a list of the directories -you can set and what kinds of files go in them. - - If the package supports it, you can cause programs to be installed -with an extra prefix or suffix on their names by giving `configure' the -option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. - -Optional Features -================= - -Some packages pay attention to `--enable-FEATURE' options to -`configure', where FEATURE indicates an optional part of the package. -They may also pay attention to `--with-PACKAGE' options, where PACKAGE -is something like `gnu-as' or `x' (for the X Window System). The -`README' should mention any `--enable-' and `--with-' options that the -package recognizes. - - For packages that use the X Window System, `configure' can usually -find the X include and library files automatically, but if it doesn't, -you can use the `configure' options `--x-includes=DIR' and -`--x-libraries=DIR' to specify their locations. - -Specifying the System Type -========================== - -There may be some features `configure' cannot figure out automatically, -but needs to determine by the type of machine the package will run on. -Usually, assuming the package is built to be run on the _same_ -architectures, `configure' can figure that out, but if it prints a -message saying it cannot guess the machine type, give it the -`--build=TYPE' option. TYPE can either be a short name for the system -type, such as `sun4', or a canonical name which has the form: - - CPU-COMPANY-SYSTEM - -where SYSTEM can have one of these forms: - - OS KERNEL-OS - - See the file `config.sub' for the possible values of each field. If -`config.sub' isn't included in this package, then this package doesn't -need to know the machine type. - - If you are _building_ compiler tools for cross-compiling, you should -use the option `--target=TYPE' to select the type of system they will -produce code for. - - If you want to _use_ a cross compiler, that generates code for a -platform different from the build platform, you should specify the -"host" platform (i.e., that on which the generated programs will -eventually be run) with `--host=TYPE'. - -Sharing Defaults -================ - -If you want to set default values for `configure' scripts to share, you -can create a site shell script called `config.site' that gives default -values for variables like `CC', `cache_file', and `prefix'. -`configure' looks for `PREFIX/share/config.site' if it exists, then -`PREFIX/etc/config.site' if it exists. Or, you can set the -`CONFIG_SITE' environment variable to the location of the site script. -A warning: not all `configure' scripts look for a site script. - -Defining Variables -================== - -Variables not defined in a site shell script can be set in the -environment passed to `configure'. However, some packages may run -configure again during the build, and the customized values of these -variables may be lost. In order to avoid this problem, you should set -them in the `configure' command line, using `VAR=value'. For example: - - ./configure CC=/usr/local2/bin/gcc - -causes the specified `gcc' to be used as the C compiler (unless it is -overridden in the site shell script). - -Unfortunately, this technique does not work for `CONFIG_SHELL' due to -an Autoconf bug. Until the bug is fixed you can use this workaround: - - CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash - -`configure' Invocation -====================== - -`configure' recognizes the following options to control how it operates. - -`--help' -`-h' - Print a summary of the options to `configure', and exit. - -`--version' -`-V' - Print the version of Autoconf used to generate the `configure' - script, and exit. - -`--cache-file=FILE' - Enable the cache: use and save the results of the tests in FILE, - traditionally `config.cache'. FILE defaults to `/dev/null' to - disable caching. - -`--config-cache' -`-C' - Alias for `--cache-file=config.cache'. - -`--quiet' -`--silent' -`-q' - Do not print messages saying which checks are being made. To - suppress all normal output, redirect it to `/dev/null' (any error - messages will still be shown). - -`--srcdir=DIR' - Look for the package's source code in directory DIR. Usually - `configure' can determine that directory automatically. - -`configure' also accepts some other, not widely useful, options. Run -`configure --help' for more details. - diff --git a/drivers/staging/usbip/userspace/Makefile.am b/drivers/staging/usbip/userspace/Makefile.am deleted file mode 100644 index 66f8bf038c9..00000000000 --- a/drivers/staging/usbip/userspace/Makefile.am +++ /dev/null @@ -1,6 +0,0 @@ -SUBDIRS := libsrc src -includedir = @includedir@/usbip -include_HEADERS := $(addprefix libsrc/, \ - usbip_common.h vhci_driver.h usbip_host_driver.h) - -dist_man_MANS := $(addprefix doc/, usbip.8 usbipd.8) diff --git a/drivers/staging/usbip/userspace/README b/drivers/staging/usbip/userspace/README deleted file mode 100644 index 831f49fea3c..00000000000 --- a/drivers/staging/usbip/userspace/README +++ /dev/null @@ -1,202 +0,0 @@ -# -# README for usbip-utils -# -# Copyright (C) 2011 matt mooney <mfm@muteddisk.com> -# 2005-2008 Takahiro Hirofuchi - - -[Requirements] - - USB/IP device drivers - Found in the staging directory of the Linux kernel. - - - libudev >= 2.0 - libudev library - - - libwrap0-dev - tcp wrapper library - - - gcc >= 4.0 - - - libtool, automake >= 1.9, autoconf >= 2.5.0, pkg-config - -[Optional] - - hwdata - Contains USB device identification data. - - -[Install] - 0. Generate configuration scripts. - $ ./autogen.sh - - 1. Compile & install the userspace utilities. - $ ./configure [--with-tcp-wrappers=no] [--with-usbids-dir=<dir>] - $ make install - - 2. Compile & install USB/IP drivers. - - -[Usage] - server:# (Physically attach your USB device.) - - server:# insmod usbip-core.ko - server:# insmod usbip-host.ko - - server:# usbipd -D - - Start usbip daemon. - - server:# usbip list -l - - List driver assignments for USB devices. - - server:# usbip bind --busid 1-2 - - Bind usbip-host.ko to the device with busid 1-2. - - The USB device 1-2 is now exportable to other hosts! - - Use `usbip unbind --busid 1-2' to stop exporting the device. - - client:# insmod usbip-core.ko - client:# insmod vhci-hcd.ko - - client:# usbip list --remote <host> - - List exported USB devices on the <host>. - - client:# usbip attach --remote <host> --busid 1-2 - - Connect the remote USB device. - - client:# usbip port - - Show virtual port status. - - client:# usbip detach --port <port> - - Detach the USB device. - - -[Example] ---------------------------- - SERVER SIDE ---------------------------- -Physically attach your USB devices to this host. - - trois:# insmod path/to/usbip-core.ko - trois:# insmod path/to/usbip-host.ko - trois:# usbipd -D - -In another terminal, let's look up what USB devices are physically -attached to this host. - - trois:# usbip list -l - Local USB devices - ================= - - busid 1-1 (05a9:a511) - 1-1:1.0 -> ov511 - - - busid 3-2 (0711:0902) - 3-2:1.0 -> none - - - busid 3-3.1 (08bb:2702) - 3-3.1:1.0 -> snd-usb-audio - 3-3.1:1.1 -> snd-usb-audio - - - busid 3-3.2 (04bb:0206) - 3-3.2:1.0 -> usb-storage - - - busid 3-3 (0409:0058) - 3-3:1.0 -> hub - - - busid 4-1 (046d:08b2) - 4-1:1.0 -> none - 4-1:1.1 -> none - 4-1:1.2 -> none - - - busid 5-2 (058f:9254) - 5-2:1.0 -> hub - -A USB storage device of busid 3-3.2 is now bound to the usb-storage -driver. To export this device, we first mark the device as -"exportable"; the device is bound to the usbip-host driver. Please -remember you can not export a USB hub. - -Mark the device of busid 3-3.2 as exportable: - - trois:# usbip --debug bind --busid 3-3.2 - ... - usbip debug: usbip_bind.c:162:[unbind_other] 3-3.2:1.0 -> usb-storage - ... - bind device on busid 3-3.2: complete - - trois:# usbip list -l - Local USB devices - ================= - ... - - - busid 3-3.2 (04bb:0206) - 3-3.2:1.0 -> usbip-host - ... - ---------------------------- - CLIENT SIDE ---------------------------- -First, let's list available remote devices that are marked as -exportable on the host. - - deux:# insmod path/to/usbip-core.ko - deux:# insmod path/to/vhci-hcd.ko - - deux:# usbip list --remote 10.0.0.3 - Exportable USB devices - ====================== - - 10.0.0.3 - 1-1: Prolific Technology, Inc. : unknown product (067b:3507) - : /sys/devices/pci0000:00/0000:00:1f.2/usb1/1-1 - : (Defined at Interface level) / unknown subclass / unknown protocol (00/00/00) - : 0 - Mass Storage / SCSI / Bulk (Zip) (08/06/50) - - 1-2.2.1: Apple Computer, Inc. : unknown product (05ac:0203) - : /sys/devices/pci0000:00/0000:00:1f.2/usb1/1-2/1-2.2/1-2.2.1 - : (Defined at Interface level) / unknown subclass / unknown protocol (00/00/00) - : 0 - Human Interface Devices / Boot Interface Subclass / Keyboard (03/01/01) - - 1-2.2.3: OmniVision Technologies, Inc. : OV511+ WebCam (05a9:a511) - : /sys/devices/pci0000:00/0000:00:1f.2/usb1/1-2/1-2.2/1-2.2.3 - : (Defined at Interface level) / unknown subclass / unknown protocol (00/00/00) - : 0 - Vendor Specific Class / unknown subclass / unknown protocol (ff/00/00) - - 3-1: Logitech, Inc. : QuickCam Pro 4000 (046d:08b2) - : /sys/devices/pci0000:00/0000:00:1e.0/0000:02:0a.0/usb3/3-1 - : (Defined at Interface level) / unknown subclass / unknown protocol (00/00/00) - : 0 - Data / unknown subclass / unknown protocol (0a/ff/00) - : 1 - Audio / Control Device / unknown protocol (01/01/00) - : 2 - Audio / Streaming / unknown protocol (01/02/00) - -Attach a remote USB device: - - deux:# usbip attach --remote 10.0.0.3 --busid 1-1 - port 0 attached - -Show the devices attached to this client: - - deux:# usbip port - Port 00: <Port in Use> at Full Speed(12Mbps) - Prolific Technology, Inc. : unknown product (067b:3507) - 6-1 -> usbip://10.0.0.3:3240/1-1 (remote bus/dev 001/004) - 6-1:1.0 used by usb-storage - /sys/class/scsi_device/0:0:0:0/device - /sys/class/scsi_host/host0/device - /sys/block/sda/device - -Detach the imported device: - - deux:# usbip detach --port 0 - port 0 detached - - -[Checklist] - - See 'Debug Tips' on the project wiki. - - http://usbip.wiki.sourceforge.net/how-to-debug-usbip - - usbip-host.ko must be bound to the target device. - - See /proc/bus/usb/devices and find "Driver=..." lines of the device. - - Shutdown firewall. - - usbip now uses TCP port 3240. - - Disable SELinux. - - Check the kernel and daemon messages. - - -[Contact] - Mailing List: linux-usb@vger.kernel.org diff --git a/drivers/staging/usbip/userspace/autogen.sh b/drivers/staging/usbip/userspace/autogen.sh deleted file mode 100755 index e1112d3fcbf..00000000000 --- a/drivers/staging/usbip/userspace/autogen.sh +++ /dev/null @@ -1,9 +0,0 @@ -#!/bin/sh -x - -#aclocal -#autoheader -#libtoolize --copy --force -#automake-1.9 -acf -#autoconf - -autoreconf -i -f -v diff --git a/drivers/staging/usbip/userspace/cleanup.sh b/drivers/staging/usbip/userspace/cleanup.sh deleted file mode 100755 index 955c3ccb729..00000000000 --- a/drivers/staging/usbip/userspace/cleanup.sh +++ /dev/null @@ -1,12 +0,0 @@ -#!/bin/sh - -if [ -r Makefile ]; then - make distclean -fi - -FILES="aclocal.m4 autom4te.cache compile config.guess config.h.in config.log \ - config.status config.sub configure cscope.out depcomp install-sh \ - libsrc/Makefile libsrc/Makefile.in libtool ltmain.sh Makefile \ - Makefile.in missing src/Makefile src/Makefile.in" - -rm -vRf $FILES diff --git a/drivers/staging/usbip/userspace/configure.ac b/drivers/staging/usbip/userspace/configure.ac deleted file mode 100644 index 607d05c5ccf..00000000000 --- a/drivers/staging/usbip/userspace/configure.ac +++ /dev/null @@ -1,111 +0,0 @@ -dnl Process this file with autoconf to produce a configure script. - -AC_PREREQ(2.59) -AC_INIT([usbip-utils], [2.0], [linux-usb@vger.kernel.org]) -AC_DEFINE([USBIP_VERSION], [0x00000111], [binary-coded decimal version number]) - -CURRENT=0 -REVISION=1 -AGE=0 -AC_SUBST([LIBUSBIP_VERSION], [$CURRENT:$REVISION:$AGE], [library version]) - -AC_CONFIG_SRCDIR([src/usbipd.c]) -AC_CONFIG_HEADERS([config.h]) - -AM_INIT_AUTOMAKE([foreign]) -LT_INIT - -# Silent build for automake >= 1.11 -m4_ifdef([AM_SILENT_RULES], [AM_SILENT_RULES([yes])]) - -AC_SUBST([EXTRA_CFLAGS], ["-Wall -Werror -Wextra -std=gnu99"]) - -# Checks for programs. -AC_PROG_CC -AC_PROG_INSTALL -AC_PROG_MAKE_SET - -# Checks for header files. -AC_HEADER_DIRENT -AC_HEADER_STDC -AC_CHECK_HEADERS([arpa/inet.h fcntl.h netdb.h netinet/in.h stdint.h stdlib.h dnl - string.h sys/socket.h syslog.h unistd.h]) - -# Checks for typedefs, structures, and compiler characteristics. -AC_TYPE_INT32_T -AC_TYPE_SIZE_T -AC_TYPE_SSIZE_T -AC_TYPE_UINT16_T -AC_TYPE_UINT32_T -AC_TYPE_UINT8_T - -# Checks for library functions. -AC_FUNC_REALLOC -AC_CHECK_FUNCS([memset mkdir regcomp socket strchr strerror strstr dnl - strtoul]) - -AC_CHECK_HEADER([libudev.h], - [AC_CHECK_LIB([udev], [udev_new], - [LIBS="$LIBS -ludev"], - [AC_MSG_ERROR([Missing udev library!])])], - [AC_MSG_ERROR([Missing /usr/include/libudev.h])]) - -# Checks for libwrap library. -AC_MSG_CHECKING([whether to use the libwrap (TCP wrappers) library]) -AC_ARG_WITH([tcp-wrappers], - [AS_HELP_STRING([--with-tcp-wrappers], - [use the libwrap (TCP wrappers) library])], - dnl [ACTION-IF-GIVEN] - [if test "$withval" = "yes"; then - AC_MSG_RESULT([yes]) - AC_MSG_CHECKING([for hosts_access in -lwrap]) - saved_LIBS="$LIBS" - LIBS="-lwrap $saved_LIBS" - AC_TRY_LINK( - [int hosts_access(); int allow_severity, deny_severity;], - [hosts_access()], - [AC_MSG_RESULT([yes]); - AC_DEFINE([HAVE_LIBWRAP], [1], - [use tcp wrapper]) wrap_LIB="-lwrap"], - [AC_MSG_RESULT([not found]); exit 1]) - else - AC_MSG_RESULT([no]); - fi], - dnl [ACTION-IF-NOT-GIVEN] - [AC_MSG_RESULT([(default)]) - AC_MSG_CHECKING([for hosts_access in -lwrap]) - saved_LIBS="$LIBS" - LIBS="-lwrap $saved_LIBS" - AC_TRY_LINK( - [int hosts_access(); int allow_severity, deny_severity;], - [hosts_access()], - [AC_MSG_RESULT([yes]); - AC_DEFINE([HAVE_LIBWRAP], [1], [use tcp wrapper])], - [AC_MSG_RESULT([no]); LIBS="$saved_LIBS"])]) - -# Sets directory containing usb.ids. -AC_ARG_WITH([usbids-dir], - [AS_HELP_STRING([--with-usbids-dir=DIR], - [where usb.ids is found (default /usr/share/hwdata/)])], - [USBIDS_DIR=$withval], [USBIDS_DIR="/usr/share/hwdata/"]) -AC_SUBST([USBIDS_DIR]) - -# use _FORTIFY_SOURCE -AC_MSG_CHECKING([whether to use fortify]) -AC_ARG_WITH([fortify], - [AS_HELP_STRING([--with-fortify], - [use _FORTIFY_SROUCE option when compiling)])], - dnl [ACTION-IF-GIVEN] - [if test "$withval" = "yes"; then - AC_MSG_RESULT([yes]) - CFLAGS="$CFLAGS -D_FORTIFY_SOURCE -O" - else - AC_MSG_RESULT([no]) - CFLAGS="$CFLAGS -U_FORTIFY_SOURCE" - fi - ], - dnl [ACTION-IF-NOT-GIVEN] - [AC_MSG_RESULT([default])]) - -AC_CONFIG_FILES([Makefile libsrc/Makefile src/Makefile]) -AC_OUTPUT diff --git a/drivers/staging/usbip/userspace/doc/usbip.8 b/drivers/staging/usbip/userspace/doc/usbip.8 deleted file mode 100644 index a6097be25d2..00000000000 --- a/drivers/staging/usbip/userspace/doc/usbip.8 +++ /dev/null @@ -1,95 +0,0 @@ -.TH USBIP "8" "February 2009" "usbip" "System Administration Utilities" -.SH NAME -usbip \- manage USB/IP devices -.SH SYNOPSIS -.B usbip -[\fIoptions\fR] <\fIcommand\fR> <\fIargs\fR> - -.SH DESCRIPTION -On a USB/IP server, devices can be listed, bound, and unbound using -this program. On a USB/IP client, devices exported by USB/IP servers -can be listed, attached and detached. - -.SH OPTIONS -.HP -\fB\-\-debug\fR -.IP -Print debugging information. -.PP - -.HP -\fB\-\-log\fR -.IP -Log to syslog. -.PP - -.HP -\fB\-\-tcp-port PORT\fR -.IP -Connect to PORT on remote host (used for attach and list --remote). -.PP - -.SH COMMANDS -.HP -\fBversion\fR -.IP -Show version and exit. -.PP - -.HP -\fBhelp\fR [\fIcommand\fR] -.IP -Print the program help message, or help on a specific command, and -then exit. -.PP - -.HP -\fBattach\fR \-\-remote=<\fIhost\fR> \-\-busid=<\fIbus_id\fR> -.IP -Attach a remote USB device. -.PP - -.HP -\fBdetach\fR \-\-port=<\fIport\fR> -.IP -Detach an imported USB device. -.PP - -.HP -\fBbind\fR \-\-busid=<\fIbusid\fR> -.IP -Make a device exportable. -.PP - -.HP -\fBunbind\fR \-\-busid=<\fIbusid\fR> -.IP -Stop exporting a device so it can be used by a local driver. -.PP - -.HP -\fBlist\fR \-\-remote=<\fIhost\fR> -.IP -List USB devices exported by a remote host. -.PP - -.HP -\fBlist\fR \-\-local -.IP -List local USB devices. -.PP - - -.SH EXAMPLES - - client:# usbip list --remote=server - - List exportable usb devices on the server. - - client:# usbip attach --remote=server --busid=1-2 - - Connect the remote USB device. - - client:# usbip detach --port=0 - - Detach the usb device. - -.SH "SEE ALSO" -\fBusbipd\fP\fB(8)\fB\fP diff --git a/drivers/staging/usbip/userspace/doc/usbipd.8 b/drivers/staging/usbip/userspace/doc/usbipd.8 deleted file mode 100644 index ac4635db3f0..00000000000 --- a/drivers/staging/usbip/userspace/doc/usbipd.8 +++ /dev/null @@ -1,91 +0,0 @@ -.TH USBIP "8" "February 2009" "usbip" "System Administration Utilities" -.SH NAME -usbipd \- USB/IP server daemon -.SH SYNOPSIS -.B usbipd -[\fIoptions\fR] - -.SH DESCRIPTION -.B usbipd -provides USB/IP clients access to exported USB devices. - -Devices have to explicitly be exported using -.B usbip bind -before usbipd makes them available to other hosts. - -The daemon accepts connections from USB/IP clients -on TCP port 3240 by default. - -.SH OPTIONS -.HP -\fB\-4\fR, \fB\-\-ipv4\fR -.IP -Bind to IPv4. Default is both. -.PP - -.HP -\fB\-6\fR, \fB\-\-ipv6\fR -.IP -Bind to IPv6. Default is both. -.PP - -.HP -\fB\-D\fR, \fB\-\-daemon\fR -.IP -Run as a daemon process. -.PP - -.HP -\fB\-d\fR, \fB\-\-debug\fR -.IP -Print debugging information. -.PP - -.HP -\fB\-PFILE\fR, \fB\-\-pid FILE\fR -.IP -Write process id to FILE. -.br -If no FILE specified, use /var/run/usbipd.pid -.PP - -\fB\-tPORT\fR, \fB\-\-tcp\-port PORT\fR -.IP -Listen on TCP/IP port PORT. -.PP - -\fB\-h\fR, \fB\-\-help\fR -.IP -Print the program help message and exit. -.PP - -.HP -\fB\-v\fR, \fB\-\-version\fR -.IP -Show version. -.PP - -.SH LIMITATIONS - -.B usbipd -offers no authentication or authorization for USB/IP. Any -USB/IP client can connect and use exported devices. - -.SH EXAMPLES - - server:# modprobe usbip - - server:# usbipd -D - - Start usbip daemon. - - server:# usbip list --local - - List driver assignments for usb devices. - - server:# usbip bind --busid=1-2 - - Bind usbip-host.ko to the device of busid 1-2. - - A usb device 1-2 is now exportable to other hosts! - - Use 'usbip unbind --busid=1-2' when you want to shutdown exporting and use the device locally. - -.SH "SEE ALSO" -\fBusbip\fP\fB(8)\fB\fP - diff --git a/drivers/staging/usbip/userspace/libsrc/Makefile.am b/drivers/staging/usbip/userspace/libsrc/Makefile.am deleted file mode 100644 index 7c8f8a4d54e..00000000000 --- a/drivers/staging/usbip/userspace/libsrc/Makefile.am +++ /dev/null @@ -1,8 +0,0 @@ -libusbip_la_CPPFLAGS = -DUSBIDS_FILE='"@USBIDS_DIR@/usb.ids"' -libusbip_la_CFLAGS = @EXTRA_CFLAGS@ -libusbip_la_LDFLAGS = -version-info @LIBUSBIP_VERSION@ - -lib_LTLIBRARIES := libusbip.la -libusbip_la_SOURCES := names.c names.h usbip_host_driver.c usbip_host_driver.h \ - usbip_common.c usbip_common.h vhci_driver.c vhci_driver.h \ - sysfs_utils.c sysfs_utils.h diff --git a/drivers/staging/usbip/userspace/libsrc/list.h b/drivers/staging/usbip/userspace/libsrc/list.h deleted file mode 100644 index 8d0c936e184..00000000000 --- a/drivers/staging/usbip/userspace/libsrc/list.h +++ /dev/null @@ -1,136 +0,0 @@ -#ifndef _LIST_H -#define _LIST_H - -/* Stripped down implementation of linked list taken - * from the Linux Kernel. - */ - -/* - * Simple doubly linked list implementation. - * - * Some of the internal functions ("__xxx") are useful when - * manipulating whole lists rather than single entries, as - * sometimes we already know the next/prev entries and we can - * generate better code by using them directly rather than - * using the generic single-entry routines. - */ - -struct list_head { - struct list_head *next, *prev; -}; - -#define LIST_HEAD_INIT(name) { &(name), &(name) } - -#define LIST_HEAD(name) \ - struct list_head name = LIST_HEAD_INIT(name) - -static inline void INIT_LIST_HEAD(struct list_head *list) -{ - list->next = list; - list->prev = list; -} - -/* - * Insert a new entry between two known consecutive entries. - * - * This is only for internal list manipulation where we know - * the prev/next entries already! - */ -static inline void __list_add(struct list_head *new, - struct list_head *prev, - struct list_head *next) -{ - next->prev = new; - new->next = next; - new->prev = prev; - prev->next = new; -} - -/** - * list_add - add a new entry - * @new: new entry to be added - * @head: list head to add it after - * - * Insert a new entry after the specified head. - * This is good for implementing stacks. - */ -static inline void list_add(struct list_head *new, struct list_head *head) -{ - __list_add(new, head, head->next); -} - -/* - * Delete a list entry by making the prev/next entries - * point to each other. - * - * This is only for internal list manipulation where we know - * the prev/next entries already! - */ -static inline void __list_del(struct list_head * prev, struct list_head * next) -{ - next->prev = prev; - prev->next = next; -} - -#define POISON_POINTER_DELTA 0 -#define LIST_POISON1 ((void *) 0x00100100 + POISON_POINTER_DELTA) -#define LIST_POISON2 ((void *) 0x00200200 + POISON_POINTER_DELTA) - -/** - * list_del - deletes entry from list. - * @entry: the element to delete from the list. - * Note: list_empty() on entry does not return true after this, the entry is - * in an undefined state. - */ -static inline void __list_del_entry(struct list_head *entry) -{ - __list_del(entry->prev, entry->next); -} - -static inline void list_del(struct list_head *entry) -{ - __list_del(entry->prev, entry->next); - entry->next = LIST_POISON1; - entry->prev = LIST_POISON2; -} - -/** - * list_entry - get the struct for this entry - * @ptr: the &struct list_head pointer. - * @type: the type of the struct this is embedded in. - * @member: the name of the list_struct within the struct. - */ -#define list_entry(ptr, type, member) \ - container_of(ptr, type, member) -/** - * list_for_each - iterate over a list - * @pos: the &struct list_head to use as a loop cursor. - * @head: the head for your list. - */ -#define list_for_each(pos, head) \ - for (pos = (head)->next; pos != (head); pos = pos->next) - -/** - * list_for_each_safe - iterate over a list safe against removal of list entry - * @pos: the &struct list_head to use as a loop cursor. - * @n: another &struct list_head to use as temporary storage - * @head: the head for your list. - */ -#define list_for_each_safe(pos, n, head) \ - for (pos = (head)->next, n = pos->next; pos != (head); \ - pos = n, n = pos->next) - -#define offsetof(TYPE, MEMBER) ((size_t) &((TYPE *)0)->MEMBER) - -/** - * container_of - cast a member of a structure out to the containing structure - * @ptr: the pointer to the member. - * @type: the type of the container struct this is embedded in. - * @member: the name of the member within the struct. - * - */ -#define container_of(ptr, type, member) ({ \ - const typeof( ((type *)0)->member ) *__mptr = (ptr); \ - (type *)( (char *)__mptr - offsetof(type,member) );}) - -#endif diff --git a/drivers/staging/usbip/userspace/libsrc/names.c b/drivers/staging/usbip/userspace/libsrc/names.c deleted file mode 100644 index 81ff8522405..00000000000 --- a/drivers/staging/usbip/userspace/libsrc/names.c +++ /dev/null @@ -1,504 +0,0 @@ -/* - * names.c -- USB name database manipulation routines - * - * Copyright (C) 1999, 2000 Thomas Sailer (sailer@ife.ee.ethz.ch) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * - * - * - * - * Copyright (C) 2005 Takahiro Hirofuchi - * - names_deinit() is added. - * - */ - -#include <sys/types.h> -#include <sys/stat.h> -#include <fcntl.h> -#include <dirent.h> -#include <string.h> -#include <errno.h> -#include <stdlib.h> -#include <unistd.h> -#include <stdio.h> -#include <ctype.h> - -#include "names.h" -#include "usbip_common.h" - -struct vendor { - struct vendor *next; - u_int16_t vendorid; - char name[1]; -}; - -struct product { - struct product *next; - u_int16_t vendorid, productid; - char name[1]; -}; - -struct class { - struct class *next; - u_int8_t classid; - char name[1]; -}; - -struct subclass { - struct subclass *next; - u_int8_t classid, subclassid; - char name[1]; -}; - -struct protocol { - struct protocol *next; - u_int8_t classid, subclassid, protocolid; - char name[1]; -}; - -struct genericstrtable { - struct genericstrtable *next; - unsigned int num; - char name[1]; -}; - - -#define HASH1 0x10 -#define HASH2 0x02 -#define HASHSZ 16 - -static unsigned int hashnum(unsigned int num) -{ - unsigned int mask1 = HASH1 << 27, mask2 = HASH2 << 27; - - for (; mask1 >= HASH1; mask1 >>= 1, mask2 >>= 1) - if (num & mask1) - num ^= mask2; - return num & (HASHSZ-1); -} - - -static struct vendor *vendors[HASHSZ] = { NULL, }; -static struct product *products[HASHSZ] = { NULL, }; -static struct class *classes[HASHSZ] = { NULL, }; -static struct subclass *subclasses[HASHSZ] = { NULL, }; -static struct protocol *protocols[HASHSZ] = { NULL, }; - -const char *names_vendor(u_int16_t vendorid) -{ - struct vendor *v; - - v = vendors[hashnum(vendorid)]; - for (; v; v = v->next) - if (v->vendorid == vendorid) - return v->name; - return NULL; -} - -const char *names_product(u_int16_t vendorid, u_int16_t productid) -{ - struct product *p; - - p = products[hashnum((vendorid << 16) | productid)]; - for (; p; p = p->next) - if (p->vendorid == vendorid && p->productid == productid) - return p->name; - return NULL; -} - -const char *names_class(u_int8_t classid) -{ - struct class *c; - - c = classes[hashnum(classid)]; - for (; c; c = c->next) - if (c->classid == classid) - return c->name; - return NULL; -} - -const char *names_subclass(u_int8_t classid, u_int8_t subclassid) -{ - struct subclass *s; - - s = subclasses[hashnum((classid << 8) | subclassid)]; - for (; s; s = s->next) - if (s->classid == classid && s->subclassid == subclassid) - return s->name; - return NULL; -} - -const char *names_protocol(u_int8_t classid, u_int8_t subclassid, - u_int8_t protocolid) -{ - struct protocol *p; - - p = protocols[hashnum((classid << 16) | (subclassid << 8) - | protocolid)]; - for (; p; p = p->next) - if (p->classid == classid && p->subclassid == subclassid && - p->protocolid == protocolid) - return p->name; - return NULL; -} - -/* add a cleanup function by takahiro */ -struct pool { - struct pool *next; - void *mem; -}; - -static struct pool *pool_head; - -static void *my_malloc(size_t size) -{ - struct pool *p; - - p = calloc(1, sizeof(struct pool)); - if (!p) - return NULL; - - p->mem = calloc(1, size); - if (!p->mem) { - free(p); - return NULL; - } - - p->next = pool_head; - pool_head = p; - - return p->mem; -} - -void names_free(void) -{ - struct pool *pool; - - if (!pool_head) - return; - - for (pool = pool_head; pool != NULL; ) { - struct pool *tmp; - - if (pool->mem) - free(pool->mem); - - tmp = pool; - pool = pool->next; - free(tmp); - } -} - -static int new_vendor(const char *name, u_int16_t vendorid) -{ - struct vendor *v; - unsigned int h = hashnum(vendorid); - - v = vendors[h]; - for (; v; v = v->next) - if (v->vendorid == vendorid) - return -1; - v = my_malloc(sizeof(struct vendor) + strlen(name)); - if (!v) - return -1; - strcpy(v->name, name); - v->vendorid = vendorid; - v->next = vendors[h]; - vendors[h] = v; - return 0; -} - -static int new_product(const char *name, u_int16_t vendorid, - u_int16_t productid) -{ - struct product *p; - unsigned int h = hashnum((vendorid << 16) | productid); - - p = products[h]; - for (; p; p = p->next) - if (p->vendorid == vendorid && p->productid == productid) - return -1; - p = my_malloc(sizeof(struct product) + strlen(name)); - if (!p) - return -1; - strcpy(p->name, name); - p->vendorid = vendorid; - p->productid = productid; - p->next = products[h]; - products[h] = p; - return 0; -} - -static int new_class(const char *name, u_int8_t classid) -{ - struct class *c; - unsigned int h = hashnum(classid); - - c = classes[h]; - for (; c; c = c->next) - if (c->classid == classid) - return -1; - c = my_malloc(sizeof(struct class) + strlen(name)); - if (!c) - return -1; - strcpy(c->name, name); - c->classid = classid; - c->next = classes[h]; - classes[h] = c; - return 0; -} - -static int new_subclass(const char *name, u_int8_t classid, u_int8_t subclassid) -{ - struct subclass *s; - unsigned int h = hashnum((classid << 8) | subclassid); - - s = subclasses[h]; - for (; s; s = s->next) - if (s->classid == classid && s->subclassid == subclassid) - return -1; - s = my_malloc(sizeof(struct subclass) + strlen(name)); - if (!s) - return -1; - strcpy(s->name, name); - s->classid = classid; - s->subclassid = subclassid; - s->next = subclasses[h]; - subclasses[h] = s; - return 0; -} - -static int new_protocol(const char *name, u_int8_t classid, u_int8_t subclassid, - u_int8_t protocolid) -{ - struct protocol *p; - unsigned int h = hashnum((classid << 16) | (subclassid << 8) - | protocolid); - - p = protocols[h]; - for (; p; p = p->next) - if (p->classid == classid && p->subclassid == subclassid - && p->protocolid == protocolid) - return -1; - p = my_malloc(sizeof(struct protocol) + strlen(name)); - if (!p) - return -1; - strcpy(p->name, name); - p->classid = classid; - p->subclassid = subclassid; - p->protocolid = protocolid; - p->next = protocols[h]; - protocols[h] = p; - return 0; -} - -static void parse(FILE *f) -{ - char buf[512], *cp; - unsigned int linectr = 0; - int lastvendor = -1; - int lastclass = -1; - int lastsubclass = -1; - int lasthut = -1; - int lastlang = -1; - unsigned int u; - - while (fgets(buf, sizeof(buf), f)) { - linectr++; - /* remove line ends */ - cp = strchr(buf, '\r'); - if (cp) - *cp = 0; - cp = strchr(buf, '\n'); - if (cp) - *cp = 0; - if (buf[0] == '#' || !buf[0]) - continue; - cp = buf; - if (buf[0] == 'P' && buf[1] == 'H' && buf[2] == 'Y' && - buf[3] == 'S' && buf[4] == 'D' && - buf[5] == 'E' && buf[6] == 'S' && /*isspace(buf[7])*/ - buf[7] == ' ') { - continue; - } - if (buf[0] == 'P' && buf[1] == 'H' && - buf[2] == 'Y' && /*isspace(buf[3])*/ buf[3] == ' ') { - continue; - } - if (buf[0] == 'B' && buf[1] == 'I' && buf[2] == 'A' && - buf[3] == 'S' && /*isspace(buf[4])*/ buf[4] == ' ') { - continue; - } - if (buf[0] == 'L' && /*isspace(buf[1])*/ buf[1] == ' ') { - lasthut = lastclass = lastvendor = lastsubclass = -1; - /* - * set 1 as pseudo-id to indicate that the parser is - * in a `L' section. - */ - lastlang = 1; - continue; - } - if (buf[0] == 'C' && /*isspace(buf[1])*/ buf[1] == ' ') { - /* class spec */ - cp = buf+2; - while (isspace(*cp)) - cp++; - if (!isxdigit(*cp)) { - err("Invalid class spec at line %u", linectr); - continue; - } - u = strtoul(cp, &cp, 16); - while (isspace(*cp)) - cp++; - if (!*cp) { - err("Invalid class spec at line %u", linectr); - continue; - } - if (new_class(cp, u)) - err("Duplicate class spec at line %u class %04x %s", - linectr, u, cp); - dbg("line %5u class %02x %s", linectr, u, cp); - lasthut = lastlang = lastvendor = lastsubclass = -1; - lastclass = u; - continue; - } - if (buf[0] == 'A' && buf[1] == 'T' && isspace(buf[2])) { - /* audio terminal type spec */ - continue; - } - if (buf[0] == 'H' && buf[1] == 'C' && buf[2] == 'C' - && isspace(buf[3])) { - /* HID Descriptor bCountryCode */ - continue; - } - if (isxdigit(*cp)) { - /* vendor */ - u = strtoul(cp, &cp, 16); - while (isspace(*cp)) - cp++; - if (!*cp) { - err("Invalid vendor spec at line %u", linectr); - continue; - } - if (new_vendor(cp, u)) - err("Duplicate vendor spec at line %u vendor %04x %s", - linectr, u, cp); - dbg("line %5u vendor %04x %s", linectr, u, cp); - lastvendor = u; - lasthut = lastlang = lastclass = lastsubclass = -1; - continue; - } - if (buf[0] == '\t' && isxdigit(buf[1])) { - /* product or subclass spec */ - u = strtoul(buf+1, &cp, 16); - while (isspace(*cp)) - cp++; - if (!*cp) { - err("Invalid product/subclass spec at line %u", - linectr); - continue; - } - if (lastvendor != -1) { - if (new_product(cp, lastvendor, u)) - err("Duplicate product spec at line %u product %04x:%04x %s", - linectr, lastvendor, u, cp); - dbg("line %5u product %04x:%04x %s", linectr, - lastvendor, u, cp); - continue; - } - if (lastclass != -1) { - if (new_subclass(cp, lastclass, u)) - err("Duplicate subclass spec at line %u class %02x:%02x %s", - linectr, lastclass, u, cp); - dbg("line %5u subclass %02x:%02x %s", linectr, - lastclass, u, cp); - lastsubclass = u; - continue; - } - if (lasthut != -1) { - /* do not store hut */ - continue; - } - if (lastlang != -1) { - /* do not store langid */ - continue; - } - err("Product/Subclass spec without prior Vendor/Class spec at line %u", - linectr); - continue; - } - if (buf[0] == '\t' && buf[1] == '\t' && isxdigit(buf[2])) { - /* protocol spec */ - u = strtoul(buf+2, &cp, 16); - while (isspace(*cp)) - cp++; - if (!*cp) { - err("Invalid protocol spec at line %u", - linectr); - continue; - } - if (lastclass != -1 && lastsubclass != -1) { - if (new_protocol(cp, lastclass, lastsubclass, - u)) - err("Duplicate protocol spec at line %u class %02x:%02x:%02x %s", - linectr, lastclass, lastsubclass, - u, cp); - dbg("line %5u protocol %02x:%02x:%02x %s", - linectr, lastclass, lastsubclass, u, cp); - continue; - } - err("Protocol spec without prior Class and Subclass spec at line %u", - linectr); - continue; - } - if (buf[0] == 'H' && buf[1] == 'I' && - buf[2] == 'D' && /*isspace(buf[3])*/ buf[3] == ' ') { - continue; - } - if (buf[0] == 'H' && buf[1] == 'U' && - buf[2] == 'T' && /*isspace(buf[3])*/ buf[3] == ' ') { - lastlang = lastclass = lastvendor = lastsubclass = -1; - /* - * set 1 as pseudo-id to indicate that the parser is - * in a `HUT' section. - */ - lasthut = 1; - continue; - } - if (buf[0] == 'R' && buf[1] == ' ') - continue; - - if (buf[0] == 'V' && buf[1] == 'T') - continue; - - err("Unknown line at line %u", linectr); - } -} - - -int names_init(char *n) -{ - FILE *f; - - f = fopen(n, "r"); - if (!f) - return errno; - - parse(f); - fclose(f); - return 0; -} diff --git a/drivers/staging/usbip/userspace/libsrc/names.h b/drivers/staging/usbip/userspace/libsrc/names.h deleted file mode 100644 index 680926512de..00000000000 --- a/drivers/staging/usbip/userspace/libsrc/names.h +++ /dev/null @@ -1,41 +0,0 @@ -/* - * names.h -- USB name database manipulation routines - * - * Copyright (C) 1999, 2000 Thomas Sailer (sailer@ife.ee.ethz.ch) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * - * - * Copyright (C) 2005 Takahiro Hirofuchi - * - names_free() is added. - */ - -#ifndef _NAMES_H -#define _NAMES_H - -#include <sys/types.h> - -/* used by usbip_common.c */ -extern const char *names_vendor(u_int16_t vendorid); -extern const char *names_product(u_int16_t vendorid, u_int16_t productid); -extern const char *names_class(u_int8_t classid); -extern const char *names_subclass(u_int8_t classid, u_int8_t subclassid); -extern const char *names_protocol(u_int8_t classid, u_int8_t subclassid, - u_int8_t protocolid); -extern int names_init(char *n); -extern void names_free(void); - -#endif /* _NAMES_H */ diff --git a/drivers/staging/usbip/userspace/libsrc/sysfs_utils.c b/drivers/staging/usbip/userspace/libsrc/sysfs_utils.c deleted file mode 100644 index 36ac88ece0b..00000000000 --- a/drivers/staging/usbip/userspace/libsrc/sysfs_utils.c +++ /dev/null @@ -1,31 +0,0 @@ -#include <sys/types.h> -#include <sys/stat.h> -#include <fcntl.h> -#include <errno.h> - -#include "sysfs_utils.h" -#include "usbip_common.h" - -int write_sysfs_attribute(const char *attr_path, const char *new_value, - size_t len) -{ - int fd; - int length; - - fd = open(attr_path, O_WRONLY); - if (fd < 0) { - dbg("error opening attribute %s", attr_path); - return -1; - } - - length = write(fd, new_value, len); - if (length < 0) { - dbg("error writing to attribute %s", attr_path); - close(fd); - return -1; - } - - close(fd); - - return 0; -} diff --git a/drivers/staging/usbip/userspace/libsrc/sysfs_utils.h b/drivers/staging/usbip/userspace/libsrc/sysfs_utils.h deleted file mode 100644 index 32ac1d105d1..00000000000 --- a/drivers/staging/usbip/userspace/libsrc/sysfs_utils.h +++ /dev/null @@ -1,8 +0,0 @@ - -#ifndef __SYSFS_UTILS_H -#define __SYSFS_UTILS_H - -int write_sysfs_attribute(const char *attr_path, const char *new_value, - size_t len); - -#endif diff --git a/drivers/staging/usbip/userspace/libsrc/usbip_common.c b/drivers/staging/usbip/userspace/libsrc/usbip_common.c deleted file mode 100644 index ac73710473d..00000000000 --- a/drivers/staging/usbip/userspace/libsrc/usbip_common.c +++ /dev/null @@ -1,285 +0,0 @@ -/* - * Copyright (C) 2005-2007 Takahiro Hirofuchi - */ - -#include <libudev.h> -#include "usbip_common.h" -#include "names.h" - -#undef PROGNAME -#define PROGNAME "libusbip" - -int usbip_use_syslog; -int usbip_use_stderr; -int usbip_use_debug; - -extern struct udev *udev_context; - -struct speed_string { - int num; - char *speed; - char *desc; -}; - -static const struct speed_string speed_strings[] = { - { USB_SPEED_UNKNOWN, "unknown", "Unknown Speed"}, - { USB_SPEED_LOW, "1.5", "Low Speed(1.5Mbps)" }, - { USB_SPEED_FULL, "12", "Full Speed(12Mbps)" }, - { USB_SPEED_HIGH, "480", "High Speed(480Mbps)" }, - { USB_SPEED_WIRELESS, "53.3-480", "Wireless"}, - { USB_SPEED_SUPER, "5000", "Super Speed(5000Mbps)" }, - { 0, NULL, NULL } -}; - -struct portst_string { - int num; - char *desc; -}; - -static struct portst_string portst_strings[] = { - { SDEV_ST_AVAILABLE, "Device Available" }, - { SDEV_ST_USED, "Device in Use" }, - { SDEV_ST_ERROR, "Device Error"}, - { VDEV_ST_NULL, "Port Available"}, - { VDEV_ST_NOTASSIGNED, "Port Initializing"}, - { VDEV_ST_USED, "Port in Use"}, - { VDEV_ST_ERROR, "Port Error"}, - { 0, NULL} -}; - -const char *usbip_status_string(int32_t status) -{ - for (int i = 0; portst_strings[i].desc != NULL; i++) - if (portst_strings[i].num == status) - return portst_strings[i].desc; - - return "Unknown Status"; -} - -const char *usbip_speed_string(int num) -{ - for (int i = 0; speed_strings[i].speed != NULL; i++) - if (speed_strings[i].num == num) - return speed_strings[i].desc; - - return "Unknown Speed"; -} - - -#define DBG_UDEV_INTEGER(name)\ - dbg("%-20s = %x", to_string(name), (int) udev->name) - -#define DBG_UINF_INTEGER(name)\ - dbg("%-20s = %x", to_string(name), (int) uinf->name) - -void dump_usb_interface(struct usbip_usb_interface *uinf) -{ - char buff[100]; - - usbip_names_get_class(buff, sizeof(buff), - uinf->bInterfaceClass, - uinf->bInterfaceSubClass, - uinf->bInterfaceProtocol); - dbg("%-20s = %s", "Interface(C/SC/P)", buff); -} - -void dump_usb_device(struct usbip_usb_device *udev) -{ - char buff[100]; - - dbg("%-20s = %s", "path", udev->path); - dbg("%-20s = %s", "busid", udev->busid); - - usbip_names_get_class(buff, sizeof(buff), - udev->bDeviceClass, - udev->bDeviceSubClass, - udev->bDeviceProtocol); - dbg("%-20s = %s", "Device(C/SC/P)", buff); - - DBG_UDEV_INTEGER(bcdDevice); - - usbip_names_get_product(buff, sizeof(buff), - udev->idVendor, - udev->idProduct); - dbg("%-20s = %s", "Vendor/Product", buff); - - DBG_UDEV_INTEGER(bNumConfigurations); - DBG_UDEV_INTEGER(bNumInterfaces); - - dbg("%-20s = %s", "speed", - usbip_speed_string(udev->speed)); - - DBG_UDEV_INTEGER(busnum); - DBG_UDEV_INTEGER(devnum); -} - - -int read_attr_value(struct udev_device *dev, const char *name, - const char *format) -{ - const char *attr; - int num = 0; - int ret; - - attr = udev_device_get_sysattr_value(dev, name); - if (!attr) { - err("udev_device_get_sysattr_value failed"); - goto err; - } - - /* The client chooses the device configuration - * when attaching it so right after being bound - * to usbip-host on the server the device will - * have no configuration. - * Therefore, attributes such as bConfigurationValue - * and bNumInterfaces will not exist and sscanf will - * fail. Check for these cases and don't treat them - * as errors. - */ - - ret = sscanf(attr, format, &num); - if (ret < 1) { - if (strcmp(name, "bConfigurationValue") && - strcmp(name, "bNumInterfaces")) { - err("sscanf failed for attribute %s", name); - goto err; - } - } - -err: - - return num; -} - - -int read_attr_speed(struct udev_device *dev) -{ - const char *speed; - - speed = udev_device_get_sysattr_value(dev, "speed"); - if (!speed) { - err("udev_device_get_sysattr_value failed"); - goto err; - } - - for (int i = 0; speed_strings[i].speed != NULL; i++) { - if (!strcmp(speed, speed_strings[i].speed)) - return speed_strings[i].num; - } - -err: - - return USB_SPEED_UNKNOWN; -} - -#define READ_ATTR(object, type, dev, name, format) \ - do { \ - (object)->name = (type) read_attr_value(dev, to_string(name), \ - format); \ - } while (0) - - -int read_usb_device(struct udev_device *sdev, struct usbip_usb_device *udev) -{ - uint32_t busnum, devnum; - const char *path, *name; - - READ_ATTR(udev, uint8_t, sdev, bDeviceClass, "%02x\n"); - READ_ATTR(udev, uint8_t, sdev, bDeviceSubClass, "%02x\n"); - READ_ATTR(udev, uint8_t, sdev, bDeviceProtocol, "%02x\n"); - - READ_ATTR(udev, uint16_t, sdev, idVendor, "%04x\n"); - READ_ATTR(udev, uint16_t, sdev, idProduct, "%04x\n"); - READ_ATTR(udev, uint16_t, sdev, bcdDevice, "%04x\n"); - - READ_ATTR(udev, uint8_t, sdev, bConfigurationValue, "%02x\n"); - READ_ATTR(udev, uint8_t, sdev, bNumConfigurations, "%02x\n"); - READ_ATTR(udev, uint8_t, sdev, bNumInterfaces, "%02x\n"); - - READ_ATTR(udev, uint8_t, sdev, devnum, "%d\n"); - udev->speed = read_attr_speed(sdev); - - path = udev_device_get_syspath(sdev); - name = udev_device_get_sysname(sdev); - - strncpy(udev->path, path, SYSFS_PATH_MAX); - strncpy(udev->busid, name, SYSFS_BUS_ID_SIZE); - - sscanf(name, "%u-%u", &busnum, &devnum); - udev->busnum = busnum; - - return 0; -} - -int read_usb_interface(struct usbip_usb_device *udev, int i, - struct usbip_usb_interface *uinf) -{ - char busid[SYSFS_BUS_ID_SIZE]; - struct udev_device *sif; - - sprintf(busid, "%s:%d.%d", udev->busid, udev->bConfigurationValue, i); - - sif = udev_device_new_from_subsystem_sysname(udev_context, "usb", busid); - if (!sif) { - err("udev_device_new_from_subsystem_sysname %s failed", busid); - return -1; - } - - READ_ATTR(uinf, uint8_t, sif, bInterfaceClass, "%02x\n"); - READ_ATTR(uinf, uint8_t, sif, bInterfaceSubClass, "%02x\n"); - READ_ATTR(uinf, uint8_t, sif, bInterfaceProtocol, "%02x\n"); - - return 0; -} - -int usbip_names_init(char *f) -{ - return names_init(f); -} - -void usbip_names_free(void) -{ - names_free(); -} - -void usbip_names_get_product(char *buff, size_t size, uint16_t vendor, - uint16_t product) -{ - const char *prod, *vend; - - prod = names_product(vendor, product); - if (!prod) - prod = "unknown product"; - - - vend = names_vendor(vendor); - if (!vend) - vend = "unknown vendor"; - - snprintf(buff, size, "%s : %s (%04x:%04x)", vend, prod, vendor, product); -} - -void usbip_names_get_class(char *buff, size_t size, uint8_t class, - uint8_t subclass, uint8_t protocol) -{ - const char *c, *s, *p; - - if (class == 0 && subclass == 0 && protocol == 0) { - snprintf(buff, size, "(Defined at Interface level) (%02x/%02x/%02x)", class, subclass, protocol); - return; - } - - p = names_protocol(class, subclass, protocol); - if (!p) - p = "unknown protocol"; - - s = names_subclass(class, subclass); - if (!s) - s = "unknown subclass"; - - c = names_class(class); - if (!c) - c = "unknown class"; - - snprintf(buff, size, "%s / %s / %s (%02x/%02x/%02x)", c, s, p, class, subclass, protocol); -} diff --git a/drivers/staging/usbip/userspace/libsrc/usbip_common.h b/drivers/staging/usbip/userspace/libsrc/usbip_common.h deleted file mode 100644 index 5a0e95edf4d..00000000000 --- a/drivers/staging/usbip/userspace/libsrc/usbip_common.h +++ /dev/null @@ -1,137 +0,0 @@ -/* - * Copyright (C) 2005-2007 Takahiro Hirofuchi - */ - -#ifndef __USBIP_COMMON_H -#define __USBIP_COMMON_H - -#include <libudev.h> - -#include <stdint.h> -#include <stdio.h> -#include <stdlib.h> -#include <string.h> - -#include <syslog.h> -#include <unistd.h> -#include <linux/usb/ch9.h> -#include "../../uapi/usbip.h" - -#ifndef USBIDS_FILE -#define USBIDS_FILE "/usr/share/hwdata/usb.ids" -#endif - -#ifndef VHCI_STATE_PATH -#define VHCI_STATE_PATH "/var/run/vhci_hcd" -#endif - -/* kernel module names */ -#define USBIP_CORE_MOD_NAME "usbip-core" -#define USBIP_HOST_DRV_NAME "usbip-host" -#define USBIP_VHCI_DRV_NAME "vhci_hcd" - -/* sysfs constants */ -#define SYSFS_MNT_PATH "/sys" -#define SYSFS_BUS_NAME "bus" -#define SYSFS_BUS_TYPE "usb" -#define SYSFS_DRIVERS_NAME "drivers" - -#define SYSFS_PATH_MAX 256 -#define SYSFS_BUS_ID_SIZE 32 - -extern int usbip_use_syslog; -extern int usbip_use_stderr; -extern int usbip_use_debug ; - -#define PROGNAME "usbip" - -#define pr_fmt(fmt) "%s: %s: " fmt "\n", PROGNAME -#define dbg_fmt(fmt) pr_fmt("%s:%d:[%s] " fmt), "debug", \ - __FILE__, __LINE__, __func__ - -#define err(fmt, args...) \ - do { \ - if (usbip_use_syslog) { \ - syslog(LOG_ERR, pr_fmt(fmt), "error", ##args); \ - } \ - if (usbip_use_stderr) { \ - fprintf(stderr, pr_fmt(fmt), "error", ##args); \ - } \ - } while (0) - -#define info(fmt, args...) \ - do { \ - if (usbip_use_syslog) { \ - syslog(LOG_INFO, pr_fmt(fmt), "info", ##args); \ - } \ - if (usbip_use_stderr) { \ - fprintf(stderr, pr_fmt(fmt), "info", ##args); \ - } \ - } while (0) - -#define dbg(fmt, args...) \ - do { \ - if (usbip_use_debug) { \ - if (usbip_use_syslog) { \ - syslog(LOG_DEBUG, dbg_fmt(fmt), ##args); \ - } \ - if (usbip_use_stderr) { \ - fprintf(stderr, dbg_fmt(fmt), ##args); \ - } \ - } \ - } while (0) - -#define BUG() \ - do { \ - err("sorry, it's a bug!"); \ - abort(); \ - } while (0) - -struct usbip_usb_interface { - uint8_t bInterfaceClass; - uint8_t bInterfaceSubClass; - uint8_t bInterfaceProtocol; - uint8_t padding; /* alignment */ -} __attribute__((packed)); - -struct usbip_usb_device { - char path[SYSFS_PATH_MAX]; - char busid[SYSFS_BUS_ID_SIZE]; - - uint32_t busnum; - uint32_t devnum; - uint32_t speed; - - uint16_t idVendor; - uint16_t idProduct; - uint16_t bcdDevice; - - uint8_t bDeviceClass; - uint8_t bDeviceSubClass; - uint8_t bDeviceProtocol; - uint8_t bConfigurationValue; - uint8_t bNumConfigurations; - uint8_t bNumInterfaces; -} __attribute__((packed)); - -#define to_string(s) #s - -void dump_usb_interface(struct usbip_usb_interface *); -void dump_usb_device(struct usbip_usb_device *); -int read_usb_device(struct udev_device *sdev, struct usbip_usb_device *udev); -int read_attr_value(struct udev_device *dev, const char *name, - const char *format); -int read_usb_interface(struct usbip_usb_device *udev, int i, - struct usbip_usb_interface *uinf); - -const char *usbip_speed_string(int num); -const char *usbip_status_string(int32_t status); - -int usbip_names_init(char *); -void usbip_names_free(void); -void usbip_names_get_product(char *buff, size_t size, uint16_t vendor, - uint16_t product); -void usbip_names_get_class(char *buff, size_t size, uint8_t class, - uint8_t subclass, uint8_t protocol); - -#endif /* __USBIP_COMMON_H */ diff --git a/drivers/staging/usbip/userspace/libsrc/usbip_host_driver.c b/drivers/staging/usbip/userspace/libsrc/usbip_host_driver.c deleted file mode 100644 index bef08d5c44e..00000000000 --- a/drivers/staging/usbip/userspace/libsrc/usbip_host_driver.c +++ /dev/null @@ -1,280 +0,0 @@ -/* - * Copyright (C) 2011 matt mooney <mfm@muteddisk.com> - * 2005-2007 Takahiro Hirofuchi - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include <sys/types.h> -#include <sys/stat.h> -#include <fcntl.h> - -#include <errno.h> -#include <unistd.h> - -#include <libudev.h> - -#include "usbip_common.h" -#include "usbip_host_driver.h" -#include "list.h" -#include "sysfs_utils.h" - -#undef PROGNAME -#define PROGNAME "libusbip" - -struct usbip_host_driver *host_driver; -struct udev *udev_context; - -static int32_t read_attr_usbip_status(struct usbip_usb_device *udev) -{ - char status_attr_path[SYSFS_PATH_MAX]; - int fd; - int length; - char status; - int value = 0; - - snprintf(status_attr_path, SYSFS_PATH_MAX, "%s/usbip_status", - udev->path); - - fd = open(status_attr_path, O_RDONLY); - if (fd < 0) { - err("error opening attribute %s", status_attr_path); - return -1; - } - - length = read(fd, &status, 1); - if (length < 0) { - err("error reading attribute %s", status_attr_path); - close(fd); - return -1; - } - - value = atoi(&status); - - return value; -} - -static -struct usbip_exported_device *usbip_exported_device_new(const char *sdevpath) -{ - struct usbip_exported_device *edev = NULL; - struct usbip_exported_device *edev_old; - size_t size; - int i; - - edev = calloc(1, sizeof(struct usbip_exported_device)); - - edev->sudev = udev_device_new_from_syspath(udev_context, sdevpath); - if (!edev->sudev) { - err("udev_device_new_from_syspath: %s", sdevpath); - goto err; - } - - read_usb_device(edev->sudev, &edev->udev); - - edev->status = read_attr_usbip_status(&edev->udev); - if (edev->status < 0) - goto err; - - /* reallocate buffer to include usb interface data */ - size = sizeof(struct usbip_exported_device) + - edev->udev.bNumInterfaces * sizeof(struct usbip_usb_interface); - - edev_old = edev; - edev = realloc(edev, size); - if (!edev) { - edev = edev_old; - dbg("realloc failed"); - goto err; - } - - for (i = 0; i < edev->udev.bNumInterfaces; i++) - read_usb_interface(&edev->udev, i, &edev->uinf[i]); - - return edev; -err: - if (edev->sudev) - udev_device_unref(edev->sudev); - if (edev) - free(edev); - - return NULL; -} - -static int refresh_exported_devices(void) -{ - struct usbip_exported_device *edev; - struct udev_enumerate *enumerate; - struct udev_list_entry *devices, *dev_list_entry; - struct udev_device *dev; - const char *path; - const char *driver; - - enumerate = udev_enumerate_new(udev_context); - udev_enumerate_add_match_subsystem(enumerate, "usb"); - udev_enumerate_scan_devices(enumerate); - - devices = udev_enumerate_get_list_entry(enumerate); - - udev_list_entry_foreach(dev_list_entry, devices) { - path = udev_list_entry_get_name(dev_list_entry); - dev = udev_device_new_from_syspath(udev_context, path); - if (dev == NULL) - continue; - - /* Check whether device uses usbip-host driver. */ - driver = udev_device_get_driver(dev); - if (driver != NULL && !strcmp(driver, USBIP_HOST_DRV_NAME)) { - edev = usbip_exported_device_new(path); - if (!edev) { - dbg("usbip_exported_device_new failed"); - continue; - } - - list_add(&edev->node, &host_driver->edev_list); - host_driver->ndevs++; - } - } - - return 0; -} - -static void usbip_exported_device_destroy(void) -{ - struct list_head *i, *tmp; - struct usbip_exported_device *edev; - - list_for_each_safe(i, tmp, &host_driver->edev_list) { - edev = list_entry(i, struct usbip_exported_device, node); - list_del(i); - free(edev); - } -} - -int usbip_host_driver_open(void) -{ - int rc; - - udev_context = udev_new(); - if (!udev_context) { - err("udev_new failed"); - return -1; - } - - host_driver = calloc(1, sizeof(*host_driver)); - - host_driver->ndevs = 0; - INIT_LIST_HEAD(&host_driver->edev_list); - - rc = refresh_exported_devices(); - if (rc < 0) - goto err_free_host_driver; - - return 0; - -err_free_host_driver: - free(host_driver); - host_driver = NULL; - - udev_unref(udev_context); - - return -1; -} - -void usbip_host_driver_close(void) -{ - if (!host_driver) - return; - - usbip_exported_device_destroy(); - - free(host_driver); - host_driver = NULL; - - udev_unref(udev_context); -} - -int usbip_host_refresh_device_list(void) -{ - int rc; - - usbip_exported_device_destroy(); - - host_driver->ndevs = 0; - INIT_LIST_HEAD(&host_driver->edev_list); - - rc = refresh_exported_devices(); - if (rc < 0) - return -1; - - return 0; -} - -int usbip_host_export_device(struct usbip_exported_device *edev, int sockfd) -{ - char attr_name[] = "usbip_sockfd"; - char sockfd_attr_path[SYSFS_PATH_MAX]; - char sockfd_buff[30]; - int ret; - - if (edev->status != SDEV_ST_AVAILABLE) { - dbg("device not available: %s", edev->udev.busid); - switch (edev->status) { - case SDEV_ST_ERROR: - dbg("status SDEV_ST_ERROR"); - break; - case SDEV_ST_USED: - dbg("status SDEV_ST_USED"); - break; - default: - dbg("status unknown: 0x%x", edev->status); - } - return -1; - } - - /* only the first interface is true */ - snprintf(sockfd_attr_path, sizeof(sockfd_attr_path), "%s/%s", - edev->udev.path, attr_name); - - snprintf(sockfd_buff, sizeof(sockfd_buff), "%d\n", sockfd); - - ret = write_sysfs_attribute(sockfd_attr_path, sockfd_buff, - strlen(sockfd_buff)); - if (ret < 0) { - err("write_sysfs_attribute failed: sockfd %s to %s", - sockfd_buff, sockfd_attr_path); - return ret; - } - - info("connect: %s", edev->udev.busid); - - return ret; -} - -struct usbip_exported_device *usbip_host_get_device(int num) -{ - struct list_head *i; - struct usbip_exported_device *edev; - int cnt = 0; - - list_for_each(i, &host_driver->edev_list) { - edev = list_entry(i, struct usbip_exported_device, node); - if (num == cnt) - return edev; - else - cnt++; - } - - return NULL; -} diff --git a/drivers/staging/usbip/userspace/libsrc/usbip_host_driver.h b/drivers/staging/usbip/userspace/libsrc/usbip_host_driver.h deleted file mode 100644 index 2a31f855c61..00000000000 --- a/drivers/staging/usbip/userspace/libsrc/usbip_host_driver.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * Copyright (C) 2011 matt mooney <mfm@muteddisk.com> - * 2005-2007 Takahiro Hirofuchi - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#ifndef __USBIP_HOST_DRIVER_H -#define __USBIP_HOST_DRIVER_H - -#include <stdint.h> -#include "usbip_common.h" -#include "list.h" - -struct usbip_host_driver { - int ndevs; - /* list of exported device */ - struct list_head edev_list; -}; - -struct usbip_exported_device { - struct udev_device *sudev; - int32_t status; - struct usbip_usb_device udev; - struct list_head node; - struct usbip_usb_interface uinf[]; -}; - -extern struct usbip_host_driver *host_driver; - -int usbip_host_driver_open(void); -void usbip_host_driver_close(void); - -int usbip_host_refresh_device_list(void); -int usbip_host_export_device(struct usbip_exported_device *edev, int sockfd); -struct usbip_exported_device *usbip_host_get_device(int num); - -#endif /* __USBIP_HOST_DRIVER_H */ diff --git a/drivers/staging/usbip/userspace/libsrc/vhci_driver.c b/drivers/staging/usbip/userspace/libsrc/vhci_driver.c deleted file mode 100644 index ad920477353..00000000000 --- a/drivers/staging/usbip/userspace/libsrc/vhci_driver.c +++ /dev/null @@ -1,411 +0,0 @@ -/* - * Copyright (C) 2005-2007 Takahiro Hirofuchi - */ - -#include "usbip_common.h" -#include "vhci_driver.h" -#include <limits.h> -#include <netdb.h> -#include <libudev.h> -#include "sysfs_utils.h" - -#undef PROGNAME -#define PROGNAME "libusbip" - -struct usbip_vhci_driver *vhci_driver; -struct udev *udev_context; - -static struct usbip_imported_device * -imported_device_init(struct usbip_imported_device *idev, char *busid) -{ - struct udev_device *sudev; - - sudev = udev_device_new_from_subsystem_sysname(udev_context, - "usb", busid); - if (!sudev) { - dbg("udev_device_new_from_subsystem_sysname failed: %s", busid); - goto err; - } - read_usb_device(sudev, &idev->udev); - udev_device_unref(sudev); - - return idev; - -err: - return NULL; -} - - - -static int parse_status(const char *value) -{ - int ret = 0; - char *c; - - - for (int i = 0; i < vhci_driver->nports; i++) - memset(&vhci_driver->idev[i], 0, sizeof(vhci_driver->idev[i])); - - - /* skip a header line */ - c = strchr(value, '\n'); - if (!c) - return -1; - c++; - - while (*c != '\0') { - int port, status, speed, devid; - unsigned long socket; - char lbusid[SYSFS_BUS_ID_SIZE]; - - ret = sscanf(c, "%d %d %d %x %lx %31s\n", - &port, &status, &speed, - &devid, &socket, lbusid); - - if (ret < 5) { - dbg("sscanf failed: %d", ret); - BUG(); - } - - dbg("port %d status %d speed %d devid %x", - port, status, speed, devid); - dbg("socket %lx lbusid %s", socket, lbusid); - - - /* if a device is connected, look at it */ - { - struct usbip_imported_device *idev = &vhci_driver->idev[port]; - - idev->port = port; - idev->status = status; - - idev->devid = devid; - - idev->busnum = (devid >> 16); - idev->devnum = (devid & 0x0000ffff); - - if (idev->status != VDEV_ST_NULL - && idev->status != VDEV_ST_NOTASSIGNED) { - idev = imported_device_init(idev, lbusid); - if (!idev) { - dbg("imported_device_init failed"); - return -1; - } - } - } - - - /* go to the next line */ - c = strchr(c, '\n'); - if (!c) - break; - c++; - } - - dbg("exit"); - - return 0; -} - -static int refresh_imported_device_list(void) -{ - const char *attr_status; - - attr_status = udev_device_get_sysattr_value(vhci_driver->hc_device, - "status"); - if (!attr_status) { - err("udev_device_get_sysattr_value failed"); - return -1; - } - - return parse_status(attr_status); -} - -static int get_nports(void) -{ - char *c; - int nports = 0; - const char *attr_status; - - attr_status = udev_device_get_sysattr_value(vhci_driver->hc_device, - "status"); - if (!attr_status) { - err("udev_device_get_sysattr_value failed"); - return -1; - } - - /* skip a header line */ - c = strchr(attr_status, '\n'); - if (!c) - return 0; - c++; - - while (*c != '\0') { - /* go to the next line */ - c = strchr(c, '\n'); - if (!c) - return nports; - c++; - nports += 1; - } - - return nports; -} - -/* - * Read the given port's record. - * - * To avoid buffer overflow we will read the entire line and - * validate each part's size. The initial buffer is padded by 4 to - * accommodate the 2 spaces, 1 newline and an additional character - * which is needed to properly validate the 3rd part without it being - * truncated to an acceptable length. - */ -static int read_record(int rhport, char *host, unsigned long host_len, - char *port, unsigned long port_len, char *busid) -{ - int part; - FILE *file; - char path[PATH_MAX+1]; - char *buffer, *start, *end; - char delim[] = {' ', ' ', '\n'}; - int max_len[] = {(int)host_len, (int)port_len, SYSFS_BUS_ID_SIZE}; - size_t buffer_len = host_len + port_len + SYSFS_BUS_ID_SIZE + 4; - - buffer = malloc(buffer_len); - if (!buffer) - return -1; - - snprintf(path, PATH_MAX, VHCI_STATE_PATH"/port%d", rhport); - - file = fopen(path, "r"); - if (!file) { - err("fopen"); - free(buffer); - return -1; - } - - if (fgets(buffer, buffer_len, file) == NULL) { - err("fgets"); - free(buffer); - fclose(file); - return -1; - } - fclose(file); - - /* validate the length of each of the 3 parts */ - start = buffer; - for (part = 0; part < 3; part++) { - end = strchr(start, delim[part]); - if (end == NULL || (end - start) > max_len[part]) { - free(buffer); - return -1; - } - start = end + 1; - } - - if (sscanf(buffer, "%s %s %s\n", host, port, busid) != 3) { - err("sscanf"); - free(buffer); - return -1; - } - - free(buffer); - - return 0; -} - -/* ---------------------------------------------------------------------- */ - -int usbip_vhci_driver_open(void) -{ - udev_context = udev_new(); - if (!udev_context) { - err("udev_new failed"); - return -1; - } - - vhci_driver = calloc(1, sizeof(struct usbip_vhci_driver)); - - /* will be freed in usbip_driver_close() */ - vhci_driver->hc_device = - udev_device_new_from_subsystem_sysname(udev_context, - USBIP_VHCI_BUS_TYPE, - USBIP_VHCI_DRV_NAME); - if (!vhci_driver->hc_device) { - err("udev_device_new_from_subsystem_sysname failed"); - goto err; - } - - vhci_driver->nports = get_nports(); - - dbg("available ports: %d", vhci_driver->nports); - - if (refresh_imported_device_list()) - goto err; - - return 0; - -err: - udev_device_unref(vhci_driver->hc_device); - - if (vhci_driver) - free(vhci_driver); - - vhci_driver = NULL; - - udev_unref(udev_context); - - return -1; -} - - -void usbip_vhci_driver_close(void) -{ - if (!vhci_driver) - return; - - udev_device_unref(vhci_driver->hc_device); - - free(vhci_driver); - - vhci_driver = NULL; - - udev_unref(udev_context); -} - - -int usbip_vhci_refresh_device_list(void) -{ - - if (refresh_imported_device_list()) - goto err; - - return 0; -err: - dbg("failed to refresh device list"); - return -1; -} - - -int usbip_vhci_get_free_port(void) -{ - for (int i = 0; i < vhci_driver->nports; i++) { - if (vhci_driver->idev[i].status == VDEV_ST_NULL) - return i; - } - - return -1; -} - -int usbip_vhci_attach_device2(uint8_t port, int sockfd, uint32_t devid, - uint32_t speed) { - char buff[200]; /* what size should be ? */ - char attach_attr_path[SYSFS_PATH_MAX]; - char attr_attach[] = "attach"; - const char *path; - int ret; - - snprintf(buff, sizeof(buff), "%u %d %u %u", - port, sockfd, devid, speed); - dbg("writing: %s", buff); - - path = udev_device_get_syspath(vhci_driver->hc_device); - snprintf(attach_attr_path, sizeof(attach_attr_path), "%s/%s", - path, attr_attach); - dbg("attach attribute path: %s", attach_attr_path); - - ret = write_sysfs_attribute(attach_attr_path, buff, strlen(buff)); - if (ret < 0) { - dbg("write_sysfs_attribute failed"); - return -1; - } - - dbg("attached port: %d", port); - - return 0; -} - -static unsigned long get_devid(uint8_t busnum, uint8_t devnum) -{ - return (busnum << 16) | devnum; -} - -/* will be removed */ -int usbip_vhci_attach_device(uint8_t port, int sockfd, uint8_t busnum, - uint8_t devnum, uint32_t speed) -{ - int devid = get_devid(busnum, devnum); - - return usbip_vhci_attach_device2(port, sockfd, devid, speed); -} - -int usbip_vhci_detach_device(uint8_t port) -{ - char detach_attr_path[SYSFS_PATH_MAX]; - char attr_detach[] = "detach"; - char buff[200]; /* what size should be ? */ - const char *path; - int ret; - - snprintf(buff, sizeof(buff), "%u", port); - dbg("writing: %s", buff); - - path = udev_device_get_syspath(vhci_driver->hc_device); - snprintf(detach_attr_path, sizeof(detach_attr_path), "%s/%s", - path, attr_detach); - dbg("detach attribute path: %s", detach_attr_path); - - ret = write_sysfs_attribute(detach_attr_path, buff, strlen(buff)); - if (ret < 0) { - dbg("write_sysfs_attribute failed"); - return -1; - } - - dbg("detached port: %d", port); - - return 0; -} - -int usbip_vhci_imported_device_dump(struct usbip_imported_device *idev) -{ - char product_name[100]; - char host[NI_MAXHOST] = "unknown host"; - char serv[NI_MAXSERV] = "unknown port"; - char remote_busid[SYSFS_BUS_ID_SIZE]; - int ret; - int read_record_error = 0; - - if (idev->status == VDEV_ST_NULL || idev->status == VDEV_ST_NOTASSIGNED) - return 0; - - ret = read_record(idev->port, host, sizeof(host), serv, sizeof(serv), - remote_busid); - if (ret) { - err("read_record"); - read_record_error = 1; - } - - printf("Port %02d: <%s> at %s\n", idev->port, - usbip_status_string(idev->status), - usbip_speed_string(idev->udev.speed)); - - usbip_names_get_product(product_name, sizeof(product_name), - idev->udev.idVendor, idev->udev.idProduct); - - printf(" %s\n", product_name); - - if (!read_record_error) { - printf("%10s -> usbip://%s:%s/%s\n", idev->udev.busid, - host, serv, remote_busid); - printf("%10s -> remote bus/dev %03d/%03d\n", " ", - idev->busnum, idev->devnum); - } else { - printf("%10s -> unknown host, remote port and remote busid\n", - idev->udev.busid); - printf("%10s -> remote bus/dev %03d/%03d\n", " ", - idev->busnum, idev->devnum); - } - - return 0; -} diff --git a/drivers/staging/usbip/userspace/libsrc/vhci_driver.h b/drivers/staging/usbip/userspace/libsrc/vhci_driver.h deleted file mode 100644 index fa2316cf2ca..00000000000 --- a/drivers/staging/usbip/userspace/libsrc/vhci_driver.h +++ /dev/null @@ -1,59 +0,0 @@ -/* - * Copyright (C) 2005-2007 Takahiro Hirofuchi - */ - -#ifndef __VHCI_DRIVER_H -#define __VHCI_DRIVER_H - -#include <libudev.h> -#include <stdint.h> - -#include "usbip_common.h" - -#define USBIP_VHCI_BUS_TYPE "platform" -#define MAXNPORT 128 - -struct usbip_imported_device { - uint8_t port; - uint32_t status; - - uint32_t devid; - - uint8_t busnum; - uint8_t devnum; - - /* usbip_class_device list */ - struct usbip_usb_device udev; -}; - -struct usbip_vhci_driver { - - /* /sys/devices/platform/vhci_hcd */ - struct udev_device *hc_device; - - int nports; - struct usbip_imported_device idev[MAXNPORT]; -}; - - -extern struct usbip_vhci_driver *vhci_driver; - -int usbip_vhci_driver_open(void); -void usbip_vhci_driver_close(void); - -int usbip_vhci_refresh_device_list(void); - - -int usbip_vhci_get_free_port(void); -int usbip_vhci_attach_device2(uint8_t port, int sockfd, uint32_t devid, - uint32_t speed); - -/* will be removed */ -int usbip_vhci_attach_device(uint8_t port, int sockfd, uint8_t busnum, - uint8_t devnum, uint32_t speed); - -int usbip_vhci_detach_device(uint8_t port); - -int usbip_vhci_imported_device_dump(struct usbip_imported_device *idev); - -#endif /* __VHCI_DRIVER_H */ diff --git a/drivers/staging/usbip/userspace/src/Makefile.am b/drivers/staging/usbip/userspace/src/Makefile.am deleted file mode 100644 index e81a4ebadef..00000000000 --- a/drivers/staging/usbip/userspace/src/Makefile.am +++ /dev/null @@ -1,11 +0,0 @@ -AM_CPPFLAGS = -I$(top_srcdir)/libsrc -DUSBIDS_FILE='"@USBIDS_DIR@/usb.ids"' -AM_CFLAGS = @EXTRA_CFLAGS@ -LDADD = $(top_builddir)/libsrc/libusbip.la - -sbin_PROGRAMS := usbip usbipd - -usbip_SOURCES := usbip.h utils.h usbip.c utils.c usbip_network.c \ - usbip_attach.c usbip_detach.c usbip_list.c \ - usbip_bind.c usbip_unbind.c usbip_port.c - -usbipd_SOURCES := usbip_network.h usbipd.c usbip_network.c diff --git a/drivers/staging/usbip/userspace/src/usbip.c b/drivers/staging/usbip/userspace/src/usbip.c deleted file mode 100644 index d7599d94352..00000000000 --- a/drivers/staging/usbip/userspace/src/usbip.c +++ /dev/null @@ -1,201 +0,0 @@ -/* - * command structure borrowed from udev - * (git://git.kernel.org/pub/scm/linux/hotplug/udev.git) - * - * Copyright (C) 2011 matt mooney <mfm@muteddisk.com> - * 2005-2007 Takahiro Hirofuchi - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include <stdio.h> -#include <stdlib.h> - -#include <getopt.h> -#include <syslog.h> - -#include "usbip_common.h" -#include "usbip_network.h" -#include "usbip.h" - -static int usbip_help(int argc, char *argv[]); -static int usbip_version(int argc, char *argv[]); - -static const char usbip_version_string[] = PACKAGE_STRING; - -static const char usbip_usage_string[] = - "usbip [--debug] [--log] [--tcp-port PORT] [version]\n" - " [help] <command> <args>\n"; - -static void usbip_usage(void) -{ - printf("usage: %s", usbip_usage_string); -} - -struct command { - const char *name; - int (*fn)(int argc, char *argv[]); - const char *help; - void (*usage)(void); -}; - -static const struct command cmds[] = { - { - .name = "help", - .fn = usbip_help, - .help = NULL, - .usage = NULL - }, - { - .name = "version", - .fn = usbip_version, - .help = NULL, - .usage = NULL - }, - { - .name = "attach", - .fn = usbip_attach, - .help = "Attach a remote USB device", - .usage = usbip_attach_usage - }, - { - .name = "detach", - .fn = usbip_detach, - .help = "Detach a remote USB device", - .usage = usbip_detach_usage - }, - { - .name = "list", - .fn = usbip_list, - .help = "List exportable or local USB devices", - .usage = usbip_list_usage - }, - { - .name = "bind", - .fn = usbip_bind, - .help = "Bind device to " USBIP_HOST_DRV_NAME ".ko", - .usage = usbip_bind_usage - }, - { - .name = "unbind", - .fn = usbip_unbind, - .help = "Unbind device from " USBIP_HOST_DRV_NAME ".ko", - .usage = usbip_unbind_usage - }, - { - .name = "port", - .fn = usbip_port_show, - .help = "Show imported USB devices", - .usage = NULL - }, - { NULL, NULL, NULL, NULL } -}; - -static int usbip_help(int argc, char *argv[]) -{ - const struct command *cmd; - int i; - int ret = 0; - - if (argc > 1 && argv++) { - for (i = 0; cmds[i].name != NULL; i++) - if (!strcmp(cmds[i].name, argv[0]) && cmds[i].usage) { - cmds[i].usage(); - goto done; - } - ret = -1; - } - - usbip_usage(); - printf("\n"); - for (cmd = cmds; cmd->name != NULL; cmd++) - if (cmd->help != NULL) - printf(" %-10s %s\n", cmd->name, cmd->help); - printf("\n"); -done: - return ret; -} - -static int usbip_version(int argc, char *argv[]) -{ - (void) argc; - (void) argv; - - printf(PROGNAME " (%s)\n", usbip_version_string); - return 0; -} - -static int run_command(const struct command *cmd, int argc, char *argv[]) -{ - dbg("running command: `%s'", cmd->name); - return cmd->fn(argc, argv); -} - -int main(int argc, char *argv[]) -{ - static const struct option opts[] = { - { "debug", no_argument, NULL, 'd' }, - { "log", no_argument, NULL, 'l' }, - { "tcp-port", required_argument, NULL, 't' }, - { NULL, 0, NULL, 0 } - }; - - char *cmd; - int opt; - int i, rc = -1; - - usbip_use_stderr = 1; - opterr = 0; - for (;;) { - opt = getopt_long(argc, argv, "+dlt:", opts, NULL); - - if (opt == -1) - break; - - switch (opt) { - case 'd': - usbip_use_debug = 1; - break; - case 'l': - usbip_use_syslog = 1; - openlog("", LOG_PID, LOG_USER); - break; - case 't': - usbip_setup_port_number(optarg); - break; - case '?': - printf("usbip: invalid option\n"); - default: - usbip_usage(); - goto out; - } - } - - cmd = argv[optind]; - if (cmd) { - for (i = 0; cmds[i].name != NULL; i++) - if (!strcmp(cmds[i].name, cmd)) { - argc -= optind; - argv += optind; - optind = 0; - rc = run_command(&cmds[i], argc, argv); - goto out; - } - } - - /* invalid command */ - usbip_help(0, NULL); -out: - return (rc > -1 ? EXIT_SUCCESS : EXIT_FAILURE); -} diff --git a/drivers/staging/usbip/userspace/src/usbip.h b/drivers/staging/usbip/userspace/src/usbip.h deleted file mode 100644 index 84fe66a9d8a..00000000000 --- a/drivers/staging/usbip/userspace/src/usbip.h +++ /dev/null @@ -1,40 +0,0 @@ -/* - * Copyright (C) 2011 matt mooney <mfm@muteddisk.com> - * 2005-2007 Takahiro Hirofuchi - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#ifndef __USBIP_H -#define __USBIP_H - -#ifdef HAVE_CONFIG_H -#include "../config.h" -#endif - -/* usbip commands */ -int usbip_attach(int argc, char *argv[]); -int usbip_detach(int argc, char *argv[]); -int usbip_list(int argc, char *argv[]); -int usbip_bind(int argc, char *argv[]); -int usbip_unbind(int argc, char *argv[]); -int usbip_port_show(int argc, char *argv[]); - -void usbip_attach_usage(void); -void usbip_detach_usage(void); -void usbip_list_usage(void); -void usbip_bind_usage(void); -void usbip_unbind_usage(void); - -#endif /* __USBIP_H */ diff --git a/drivers/staging/usbip/userspace/src/usbip_attach.c b/drivers/staging/usbip/userspace/src/usbip_attach.c deleted file mode 100644 index d58a14dfc09..00000000000 --- a/drivers/staging/usbip/userspace/src/usbip_attach.c +++ /dev/null @@ -1,241 +0,0 @@ -/* - * Copyright (C) 2011 matt mooney <mfm@muteddisk.com> - * 2005-2007 Takahiro Hirofuchi - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include <sys/stat.h> - -#include <limits.h> -#include <stdint.h> -#include <stdio.h> -#include <string.h> - -#include <fcntl.h> -#include <getopt.h> -#include <unistd.h> -#include <errno.h> - -#include "vhci_driver.h" -#include "usbip_common.h" -#include "usbip_network.h" -#include "usbip.h" - -static const char usbip_attach_usage_string[] = - "usbip attach <args>\n" - " -r, --remote=<host> The machine with exported USB devices\n" - " -b, --busid=<busid> Busid of the device on <host>\n"; - -void usbip_attach_usage(void) -{ - printf("usage: %s", usbip_attach_usage_string); -} - -#define MAX_BUFF 100 -static int record_connection(char *host, char *port, char *busid, int rhport) -{ - int fd; - char path[PATH_MAX+1]; - char buff[MAX_BUFF+1]; - int ret; - - ret = mkdir(VHCI_STATE_PATH, 0700); - if (ret < 0) { - /* if VHCI_STATE_PATH exists, then it better be a directory */ - if (errno == EEXIST) { - struct stat s; - - ret = stat(VHCI_STATE_PATH, &s); - if (ret < 0) - return -1; - if (!(s.st_mode & S_IFDIR)) - return -1; - } else - return -1; - } - - snprintf(path, PATH_MAX, VHCI_STATE_PATH"/port%d", rhport); - - fd = open(path, O_WRONLY|O_CREAT|O_TRUNC, S_IRWXU); - if (fd < 0) - return -1; - - snprintf(buff, MAX_BUFF, "%s %s %s\n", - host, port, busid); - - ret = write(fd, buff, strlen(buff)); - if (ret != (ssize_t) strlen(buff)) { - close(fd); - return -1; - } - - close(fd); - - return 0; -} - -static int import_device(int sockfd, struct usbip_usb_device *udev) -{ - int rc; - int port; - - rc = usbip_vhci_driver_open(); - if (rc < 0) { - err("open vhci_driver"); - return -1; - } - - port = usbip_vhci_get_free_port(); - if (port < 0) { - err("no free port"); - usbip_vhci_driver_close(); - return -1; - } - - rc = usbip_vhci_attach_device(port, sockfd, udev->busnum, - udev->devnum, udev->speed); - if (rc < 0) { - err("import device"); - usbip_vhci_driver_close(); - return -1; - } - - usbip_vhci_driver_close(); - - return port; -} - -static int query_import_device(int sockfd, char *busid) -{ - int rc; - struct op_import_request request; - struct op_import_reply reply; - uint16_t code = OP_REP_IMPORT; - - memset(&request, 0, sizeof(request)); - memset(&reply, 0, sizeof(reply)); - - /* send a request */ - rc = usbip_net_send_op_common(sockfd, OP_REQ_IMPORT, 0); - if (rc < 0) { - err("send op_common"); - return -1; - } - - strncpy(request.busid, busid, SYSFS_BUS_ID_SIZE-1); - - PACK_OP_IMPORT_REQUEST(0, &request); - - rc = usbip_net_send(sockfd, (void *) &request, sizeof(request)); - if (rc < 0) { - err("send op_import_request"); - return -1; - } - - /* receive a reply */ - rc = usbip_net_recv_op_common(sockfd, &code); - if (rc < 0) { - err("recv op_common"); - return -1; - } - - rc = usbip_net_recv(sockfd, (void *) &reply, sizeof(reply)); - if (rc < 0) { - err("recv op_import_reply"); - return -1; - } - - PACK_OP_IMPORT_REPLY(0, &reply); - - /* check the reply */ - if (strncmp(reply.udev.busid, busid, SYSFS_BUS_ID_SIZE)) { - err("recv different busid %s", reply.udev.busid); - return -1; - } - - /* import a device */ - return import_device(sockfd, &reply.udev); -} - -static int attach_device(char *host, char *busid) -{ - int sockfd; - int rc; - int rhport; - - sockfd = usbip_net_tcp_connect(host, usbip_port_string); - if (sockfd < 0) { - err("tcp connect"); - return -1; - } - - rhport = query_import_device(sockfd, busid); - if (rhport < 0) { - err("query"); - return -1; - } - - close(sockfd); - - rc = record_connection(host, usbip_port_string, busid, rhport); - if (rc < 0) { - err("record connection"); - return -1; - } - - return 0; -} - -int usbip_attach(int argc, char *argv[]) -{ - static const struct option opts[] = { - { "remote", required_argument, NULL, 'r' }, - { "busid", required_argument, NULL, 'b' }, - { NULL, 0, NULL, 0 } - }; - char *host = NULL; - char *busid = NULL; - int opt; - int ret = -1; - - for (;;) { - opt = getopt_long(argc, argv, "r:b:", opts, NULL); - - if (opt == -1) - break; - - switch (opt) { - case 'r': - host = optarg; - break; - case 'b': - busid = optarg; - break; - default: - goto err_out; - } - } - - if (!host || !busid) - goto err_out; - - ret = attach_device(host, busid); - goto out; - -err_out: - usbip_attach_usage(); -out: - return ret; -} diff --git a/drivers/staging/usbip/userspace/src/usbip_bind.c b/drivers/staging/usbip/userspace/src/usbip_bind.c deleted file mode 100644 index fa46141ae68..00000000000 --- a/drivers/staging/usbip/userspace/src/usbip_bind.c +++ /dev/null @@ -1,214 +0,0 @@ -/* - * Copyright (C) 2011 matt mooney <mfm@muteddisk.com> - * 2005-2007 Takahiro Hirofuchi - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include <libudev.h> - -#include <errno.h> -#include <stdio.h> -#include <stdlib.h> -#include <string.h> - -#include <getopt.h> - -#include "usbip_common.h" -#include "utils.h" -#include "usbip.h" -#include "sysfs_utils.h" - -enum unbind_status { - UNBIND_ST_OK, - UNBIND_ST_USBIP_HOST, - UNBIND_ST_FAILED -}; - -static const char usbip_bind_usage_string[] = - "usbip bind <args>\n" - " -b, --busid=<busid> Bind " USBIP_HOST_DRV_NAME ".ko to device " - "on <busid>\n"; - -void usbip_bind_usage(void) -{ - printf("usage: %s", usbip_bind_usage_string); -} - -/* call at unbound state */ -static int bind_usbip(char *busid) -{ - char attr_name[] = "bind"; - char bind_attr_path[SYSFS_PATH_MAX]; - int rc = -1; - - snprintf(bind_attr_path, sizeof(bind_attr_path), "%s/%s/%s/%s/%s/%s", - SYSFS_MNT_PATH, SYSFS_BUS_NAME, SYSFS_BUS_TYPE, - SYSFS_DRIVERS_NAME, USBIP_HOST_DRV_NAME, attr_name); - - rc = write_sysfs_attribute(bind_attr_path, busid, strlen(busid)); - if (rc < 0) { - err("error binding device %s to driver: %s", busid, - strerror(errno)); - return -1; - } - - return 0; -} - -/* buggy driver may cause dead lock */ -static int unbind_other(char *busid) -{ - enum unbind_status status = UNBIND_ST_OK; - - char attr_name[] = "unbind"; - char unbind_attr_path[SYSFS_PATH_MAX]; - int rc = -1; - - struct udev *udev; - struct udev_device *dev; - const char *driver; - const char *bDevClass; - - /* Create libudev context. */ - udev = udev_new(); - - /* Get the device. */ - dev = udev_device_new_from_subsystem_sysname(udev, "usb", busid); - if (!dev) { - dbg("unable to find device with bus ID %s", busid); - goto err_close_busid_dev; - } - - /* Check what kind of device it is. */ - bDevClass = udev_device_get_sysattr_value(dev, "bDeviceClass"); - if (!bDevClass) { - dbg("unable to get bDevClass device attribute"); - goto err_close_busid_dev; - } - - if (!strncmp(bDevClass, "09", strlen(bDevClass))) { - dbg("skip unbinding of hub"); - goto err_close_busid_dev; - } - - /* Get the device driver. */ - driver = udev_device_get_driver(dev); - if (!driver) { - /* No driver bound to this device. */ - goto out; - } - - if (!strncmp(USBIP_HOST_DRV_NAME, driver, - strlen(USBIP_HOST_DRV_NAME))) { - /* Already bound to usbip-host. */ - status = UNBIND_ST_USBIP_HOST; - goto out; - } - - /* Unbind device from driver. */ - snprintf(unbind_attr_path, sizeof(unbind_attr_path), "%s/%s/%s/%s/%s/%s", - SYSFS_MNT_PATH, SYSFS_BUS_NAME, SYSFS_BUS_TYPE, - SYSFS_DRIVERS_NAME, driver, attr_name); - - rc = write_sysfs_attribute(unbind_attr_path, busid, strlen(busid)); - if (rc < 0) { - err("error unbinding device %s from driver", busid); - goto err_close_busid_dev; - } - - goto out; - -err_close_busid_dev: - status = UNBIND_ST_FAILED; -out: - udev_device_unref(dev); - udev_unref(udev); - - return status; -} - -static int bind_device(char *busid) -{ - int rc; - struct udev *udev; - struct udev_device *dev; - - /* Check whether the device with this bus ID exists. */ - udev = udev_new(); - dev = udev_device_new_from_subsystem_sysname(udev, "usb", busid); - if (!dev) { - err("device with the specified bus ID does not exist"); - return -1; - } - udev_unref(udev); - - rc = unbind_other(busid); - if (rc == UNBIND_ST_FAILED) { - err("could not unbind driver from device on busid %s", busid); - return -1; - } else if (rc == UNBIND_ST_USBIP_HOST) { - err("device on busid %s is already bound to %s", busid, - USBIP_HOST_DRV_NAME); - return -1; - } - - rc = modify_match_busid(busid, 1); - if (rc < 0) { - err("unable to bind device on %s", busid); - return -1; - } - - rc = bind_usbip(busid); - if (rc < 0) { - err("could not bind device to %s", USBIP_HOST_DRV_NAME); - modify_match_busid(busid, 0); - return -1; - } - - info("bind device on busid %s: complete", busid); - - return 0; -} - -int usbip_bind(int argc, char *argv[]) -{ - static const struct option opts[] = { - { "busid", required_argument, NULL, 'b' }, - { NULL, 0, NULL, 0 } - }; - - int opt; - int ret = -1; - - for (;;) { - opt = getopt_long(argc, argv, "b:", opts, NULL); - - if (opt == -1) - break; - - switch (opt) { - case 'b': - ret = bind_device(optarg); - goto out; - default: - goto err_out; - } - } - -err_out: - usbip_bind_usage(); -out: - return ret; -} diff --git a/drivers/staging/usbip/userspace/src/usbip_detach.c b/drivers/staging/usbip/userspace/src/usbip_detach.c deleted file mode 100644 index 05c6d15856e..00000000000 --- a/drivers/staging/usbip/userspace/src/usbip_detach.c +++ /dev/null @@ -1,110 +0,0 @@ -/* - * Copyright (C) 2011 matt mooney <mfm@muteddisk.com> - * 2005-2007 Takahiro Hirofuchi - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include <ctype.h> -#include <limits.h> -#include <stdint.h> -#include <stdio.h> -#include <stdlib.h> -#include <string.h> - -#include <getopt.h> -#include <unistd.h> - -#include "vhci_driver.h" -#include "usbip_common.h" -#include "usbip_network.h" -#include "usbip.h" - -static const char usbip_detach_usage_string[] = - "usbip detach <args>\n" - " -p, --port=<port> " USBIP_VHCI_DRV_NAME - " port the device is on\n"; - -void usbip_detach_usage(void) -{ - printf("usage: %s", usbip_detach_usage_string); -} - -static int detach_port(char *port) -{ - int ret; - uint8_t portnum; - char path[PATH_MAX+1]; - - for (unsigned int i = 0; i < strlen(port); i++) - if (!isdigit(port[i])) { - err("invalid port %s", port); - return -1; - } - - /* check max port */ - - portnum = atoi(port); - - /* remove the port state file */ - - snprintf(path, PATH_MAX, VHCI_STATE_PATH"/port%d", portnum); - - remove(path); - rmdir(VHCI_STATE_PATH); - - ret = usbip_vhci_driver_open(); - if (ret < 0) { - err("open vhci_driver"); - return -1; - } - - ret = usbip_vhci_detach_device(portnum); - if (ret < 0) - return -1; - - usbip_vhci_driver_close(); - - return ret; -} - -int usbip_detach(int argc, char *argv[]) -{ - static const struct option opts[] = { - { "port", required_argument, NULL, 'p' }, - { NULL, 0, NULL, 0 } - }; - int opt; - int ret = -1; - - for (;;) { - opt = getopt_long(argc, argv, "p:", opts, NULL); - - if (opt == -1) - break; - - switch (opt) { - case 'p': - ret = detach_port(optarg); - goto out; - default: - goto err_out; - } - } - -err_out: - usbip_detach_usage(); -out: - return ret; -} diff --git a/drivers/staging/usbip/userspace/src/usbip_list.c b/drivers/staging/usbip/userspace/src/usbip_list.c deleted file mode 100644 index d5ce34a410e..00000000000 --- a/drivers/staging/usbip/userspace/src/usbip_list.c +++ /dev/null @@ -1,283 +0,0 @@ -/* - * Copyright (C) 2011 matt mooney <mfm@muteddisk.com> - * 2005-2007 Takahiro Hirofuchi - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include <sys/types.h> -#include <libudev.h> - -#include <errno.h> -#include <stdbool.h> -#include <stdint.h> -#include <stdio.h> -#include <stdlib.h> -#include <string.h> - -#include <getopt.h> -#include <netdb.h> -#include <unistd.h> - -#include "usbip_common.h" -#include "usbip_network.h" -#include "usbip.h" - -static const char usbip_list_usage_string[] = - "usbip list [-p|--parsable] <args>\n" - " -p, --parsable Parsable list format\n" - " -r, --remote=<host> List the exportable USB devices on <host>\n" - " -l, --local List the local USB devices\n"; - -void usbip_list_usage(void) -{ - printf("usage: %s", usbip_list_usage_string); -} - -static int get_exported_devices(char *host, int sockfd) -{ - char product_name[100]; - char class_name[100]; - struct op_devlist_reply reply; - uint16_t code = OP_REP_DEVLIST; - struct usbip_usb_device udev; - struct usbip_usb_interface uintf; - unsigned int i; - int rc, j; - - rc = usbip_net_send_op_common(sockfd, OP_REQ_DEVLIST, 0); - if (rc < 0) { - dbg("usbip_net_send_op_common failed"); - return -1; - } - - rc = usbip_net_recv_op_common(sockfd, &code); - if (rc < 0) { - dbg("usbip_net_recv_op_common failed"); - return -1; - } - - memset(&reply, 0, sizeof(reply)); - rc = usbip_net_recv(sockfd, &reply, sizeof(reply)); - if (rc < 0) { - dbg("usbip_net_recv_op_devlist failed"); - return -1; - } - PACK_OP_DEVLIST_REPLY(0, &reply); - dbg("exportable devices: %d\n", reply.ndev); - - if (reply.ndev == 0) { - info("no exportable devices found on %s", host); - return 0; - } - - printf("Exportable USB devices\n"); - printf("======================\n"); - printf(" - %s\n", host); - - for (i = 0; i < reply.ndev; i++) { - memset(&udev, 0, sizeof(udev)); - rc = usbip_net_recv(sockfd, &udev, sizeof(udev)); - if (rc < 0) { - dbg("usbip_net_recv failed: usbip_usb_device[%d]", i); - return -1; - } - usbip_net_pack_usb_device(0, &udev); - - usbip_names_get_product(product_name, sizeof(product_name), - udev.idVendor, udev.idProduct); - usbip_names_get_class(class_name, sizeof(class_name), - udev.bDeviceClass, udev.bDeviceSubClass, - udev.bDeviceProtocol); - printf("%11s: %s\n", udev.busid, product_name); - printf("%11s: %s\n", "", udev.path); - printf("%11s: %s\n", "", class_name); - - for (j = 0; j < udev.bNumInterfaces; j++) { - rc = usbip_net_recv(sockfd, &uintf, sizeof(uintf)); - if (rc < 0) { - err("usbip_net_recv failed: usbip_usb_intf[%d]", - j); - - return -1; - } - usbip_net_pack_usb_interface(0, &uintf); - - usbip_names_get_class(class_name, sizeof(class_name), - uintf.bInterfaceClass, - uintf.bInterfaceSubClass, - uintf.bInterfaceProtocol); - printf("%11s: %2d - %s\n", "", j, class_name); - } - - printf("\n"); - } - - return 0; -} - -static int list_exported_devices(char *host) -{ - int rc; - int sockfd; - - sockfd = usbip_net_tcp_connect(host, usbip_port_string); - if (sockfd < 0) { - err("could not connect to %s:%s: %s", host, - usbip_port_string, gai_strerror(sockfd)); - return -1; - } - dbg("connected to %s:%s", host, usbip_port_string); - - rc = get_exported_devices(host, sockfd); - if (rc < 0) { - err("failed to get device list from %s", host); - return -1; - } - - close(sockfd); - - return 0; -} - -static void print_device(const char *busid, const char *vendor, - const char *product, bool parsable) -{ - if (parsable) - printf("busid=%s#usbid=%.4s:%.4s#", busid, vendor, product); - else - printf(" - busid %s (%.4s:%.4s)\n", busid, vendor, product); -} - -static void print_product_name(char *product_name, bool parsable) -{ - if (!parsable) - printf(" %s\n", product_name); -} - -static int list_devices(bool parsable) -{ - struct udev *udev; - struct udev_enumerate *enumerate; - struct udev_list_entry *devices, *dev_list_entry; - struct udev_device *dev; - const char *path; - const char *idVendor; - const char *idProduct; - const char *bConfValue; - const char *bNumIntfs; - const char *busid; - char product_name[128]; - int ret = -1; - - /* Create libudev context. */ - udev = udev_new(); - - /* Create libudev device enumeration. */ - enumerate = udev_enumerate_new(udev); - - /* Take only USB devices that are not hubs and do not have - * the bInterfaceNumber attribute, i.e. are not interfaces. - */ - udev_enumerate_add_match_subsystem(enumerate, "usb"); - udev_enumerate_add_nomatch_sysattr(enumerate, "bDeviceClass", "09"); - udev_enumerate_add_nomatch_sysattr(enumerate, "bInterfaceNumber", NULL); - udev_enumerate_scan_devices(enumerate); - - devices = udev_enumerate_get_list_entry(enumerate); - - /* Show information about each device. */ - udev_list_entry_foreach(dev_list_entry, devices) { - path = udev_list_entry_get_name(dev_list_entry); - dev = udev_device_new_from_syspath(udev, path); - - /* Get device information. */ - idVendor = udev_device_get_sysattr_value(dev, "idVendor"); - idProduct = udev_device_get_sysattr_value(dev, "idProduct"); - bConfValue = udev_device_get_sysattr_value(dev, "bConfigurationValue"); - bNumIntfs = udev_device_get_sysattr_value(dev, "bNumInterfaces"); - busid = udev_device_get_sysname(dev); - if (!idVendor || !idProduct || !bConfValue || !bNumIntfs) { - err("problem getting device attributes: %s", - strerror(errno)); - goto err_out; - } - - /* Get product name. */ - usbip_names_get_product(product_name, sizeof(product_name), - strtol(idVendor, NULL, 16), - strtol(idProduct, NULL, 16)); - - /* Print information. */ - print_device(busid, idVendor, idProduct, parsable); - print_product_name(product_name, parsable); - - printf("\n"); - - udev_device_unref(dev); - } - - ret = 0; - -err_out: - udev_enumerate_unref(enumerate); - udev_unref(udev); - - return ret; -} - -int usbip_list(int argc, char *argv[]) -{ - static const struct option opts[] = { - { "parsable", no_argument, NULL, 'p' }, - { "remote", required_argument, NULL, 'r' }, - { "local", no_argument, NULL, 'l' }, - { NULL, 0, NULL, 0 } - }; - - bool parsable = false; - int opt; - int ret = -1; - - if (usbip_names_init(USBIDS_FILE)) - err("failed to open %s", USBIDS_FILE); - - for (;;) { - opt = getopt_long(argc, argv, "pr:l", opts, NULL); - - if (opt == -1) - break; - - switch (opt) { - case 'p': - parsable = true; - break; - case 'r': - ret = list_exported_devices(optarg); - goto out; - case 'l': - ret = list_devices(parsable); - goto out; - default: - goto err_out; - } - } - -err_out: - usbip_list_usage(); -out: - usbip_names_free(); - - return ret; -} diff --git a/drivers/staging/usbip/userspace/src/usbip_network.c b/drivers/staging/usbip/userspace/src/usbip_network.c deleted file mode 100644 index b4c37e76a6e..00000000000 --- a/drivers/staging/usbip/userspace/src/usbip_network.c +++ /dev/null @@ -1,303 +0,0 @@ -/* - * Copyright (C) 2011 matt mooney <mfm@muteddisk.com> - * 2005-2007 Takahiro Hirofuchi - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include <sys/socket.h> - -#include <string.h> - -#include <arpa/inet.h> -#include <netdb.h> -#include <netinet/tcp.h> -#include <unistd.h> - -#ifdef HAVE_LIBWRAP -#include <tcpd.h> -#endif - -#include "usbip_common.h" -#include "usbip_network.h" - -int usbip_port = 3240; -char *usbip_port_string = "3240"; - -void usbip_setup_port_number(char *arg) -{ - dbg("parsing port arg '%s'", arg); - char *end; - unsigned long int port = strtoul(arg, &end, 10); - - if (end == arg) { - err("port: could not parse '%s' as a decimal integer", arg); - return; - } - - if (*end != '\0') { - err("port: garbage at end of '%s'", arg); - return; - } - - if (port > UINT16_MAX) { - err("port: %s too high (max=%d)", - arg, UINT16_MAX); - return; - } - - usbip_port = port; - usbip_port_string = arg; - info("using port %d (\"%s\")", usbip_port, usbip_port_string); -} - -void usbip_net_pack_uint32_t(int pack, uint32_t *num) -{ - uint32_t i; - - if (pack) - i = htonl(*num); - else - i = ntohl(*num); - - *num = i; -} - -void usbip_net_pack_uint16_t(int pack, uint16_t *num) -{ - uint16_t i; - - if (pack) - i = htons(*num); - else - i = ntohs(*num); - - *num = i; -} - -void usbip_net_pack_usb_device(int pack, struct usbip_usb_device *udev) -{ - usbip_net_pack_uint32_t(pack, &udev->busnum); - usbip_net_pack_uint32_t(pack, &udev->devnum); - usbip_net_pack_uint32_t(pack, &udev->speed); - - usbip_net_pack_uint16_t(pack, &udev->idVendor); - usbip_net_pack_uint16_t(pack, &udev->idProduct); - usbip_net_pack_uint16_t(pack, &udev->bcdDevice); -} - -void usbip_net_pack_usb_interface(int pack __attribute__((unused)), - struct usbip_usb_interface *udev - __attribute__((unused))) -{ - /* uint8_t members need nothing */ -} - -static ssize_t usbip_net_xmit(int sockfd, void *buff, size_t bufflen, - int sending) -{ - ssize_t nbytes; - ssize_t total = 0; - - if (!bufflen) - return 0; - - do { - if (sending) - nbytes = send(sockfd, buff, bufflen, 0); - else - nbytes = recv(sockfd, buff, bufflen, MSG_WAITALL); - - if (nbytes <= 0) - return -1; - - buff = (void *)((intptr_t) buff + nbytes); - bufflen -= nbytes; - total += nbytes; - - } while (bufflen > 0); - - return total; -} - -ssize_t usbip_net_recv(int sockfd, void *buff, size_t bufflen) -{ - return usbip_net_xmit(sockfd, buff, bufflen, 0); -} - -ssize_t usbip_net_send(int sockfd, void *buff, size_t bufflen) -{ - return usbip_net_xmit(sockfd, buff, bufflen, 1); -} - -int usbip_net_send_op_common(int sockfd, uint32_t code, uint32_t status) -{ - struct op_common op_common; - int rc; - - memset(&op_common, 0, sizeof(op_common)); - - op_common.version = USBIP_VERSION; - op_common.code = code; - op_common.status = status; - - PACK_OP_COMMON(1, &op_common); - - rc = usbip_net_send(sockfd, &op_common, sizeof(op_common)); - if (rc < 0) { - dbg("usbip_net_send failed: %d", rc); - return -1; - } - - return 0; -} - -int usbip_net_recv_op_common(int sockfd, uint16_t *code) -{ - struct op_common op_common; - int rc; - - memset(&op_common, 0, sizeof(op_common)); - - rc = usbip_net_recv(sockfd, &op_common, sizeof(op_common)); - if (rc < 0) { - dbg("usbip_net_recv failed: %d", rc); - goto err; - } - - PACK_OP_COMMON(0, &op_common); - - if (op_common.version != USBIP_VERSION) { - dbg("version mismatch: %d %d", op_common.version, - USBIP_VERSION); - goto err; - } - - switch (*code) { - case OP_UNSPEC: - break; - default: - if (op_common.code != *code) { - dbg("unexpected pdu %#0x for %#0x", op_common.code, - *code); - goto err; - } - } - - if (op_common.status != ST_OK) { - dbg("request failed at peer: %d", op_common.status); - goto err; - } - - *code = op_common.code; - - return 0; -err: - return -1; -} - -int usbip_net_set_reuseaddr(int sockfd) -{ - const int val = 1; - int ret; - - ret = setsockopt(sockfd, SOL_SOCKET, SO_REUSEADDR, &val, sizeof(val)); - if (ret < 0) - dbg("setsockopt: SO_REUSEADDR"); - - return ret; -} - -int usbip_net_set_nodelay(int sockfd) -{ - const int val = 1; - int ret; - - ret = setsockopt(sockfd, IPPROTO_TCP, TCP_NODELAY, &val, sizeof(val)); - if (ret < 0) - dbg("setsockopt: TCP_NODELAY"); - - return ret; -} - -int usbip_net_set_keepalive(int sockfd) -{ - const int val = 1; - int ret; - - ret = setsockopt(sockfd, SOL_SOCKET, SO_KEEPALIVE, &val, sizeof(val)); - if (ret < 0) - dbg("setsockopt: SO_KEEPALIVE"); - - return ret; -} - -int usbip_net_set_v6only(int sockfd) -{ - const int val = 1; - int ret; - - ret = setsockopt(sockfd, IPPROTO_IPV6, IPV6_V6ONLY, &val, sizeof(val)); - if (ret < 0) - dbg("setsockopt: IPV6_V6ONLY"); - - return ret; -} - -/* - * IPv6 Ready - */ -int usbip_net_tcp_connect(char *hostname, char *service) -{ - struct addrinfo hints, *res, *rp; - int sockfd; - int ret; - - memset(&hints, 0, sizeof(hints)); - hints.ai_family = AF_UNSPEC; - hints.ai_socktype = SOCK_STREAM; - - /* get all possible addresses */ - ret = getaddrinfo(hostname, service, &hints, &res); - if (ret < 0) { - dbg("getaddrinfo: %s service %s: %s", hostname, service, - gai_strerror(ret)); - return ret; - } - - /* try the addresses */ - for (rp = res; rp; rp = rp->ai_next) { - sockfd = socket(rp->ai_family, rp->ai_socktype, - rp->ai_protocol); - if (sockfd < 0) - continue; - - /* should set TCP_NODELAY for usbip */ - usbip_net_set_nodelay(sockfd); - /* TODO: write code for heartbeat */ - usbip_net_set_keepalive(sockfd); - - if (connect(sockfd, rp->ai_addr, rp->ai_addrlen) == 0) - break; - - close(sockfd); - } - - freeaddrinfo(res); - - if (!rp) - return EAI_SYSTEM; - - return sockfd; -} diff --git a/drivers/staging/usbip/userspace/src/usbip_network.h b/drivers/staging/usbip/userspace/src/usbip_network.h deleted file mode 100644 index c1e875cf107..00000000000 --- a/drivers/staging/usbip/userspace/src/usbip_network.h +++ /dev/null @@ -1,185 +0,0 @@ -/* - * Copyright (C) 2005-2007 Takahiro Hirofuchi - */ - -#ifndef __USBIP_NETWORK_H -#define __USBIP_NETWORK_H - -#ifdef HAVE_CONFIG_H -#include "../config.h" -#endif - -#include <sys/types.h> - -#include <stdint.h> - -extern int usbip_port; -extern char *usbip_port_string; -void usbip_setup_port_number(char *arg); - -/* ---------------------------------------------------------------------- */ -/* Common header for all the kinds of PDUs. */ -struct op_common { - uint16_t version; - -#define OP_REQUEST (0x80 << 8) -#define OP_REPLY (0x00 << 8) - uint16_t code; - - /* add more error code */ -#define ST_OK 0x00 -#define ST_NA 0x01 - uint32_t status; /* op_code status (for reply) */ - -} __attribute__((packed)); - -#define PACK_OP_COMMON(pack, op_common) do {\ - usbip_net_pack_uint16_t(pack, &(op_common)->version);\ - usbip_net_pack_uint16_t(pack, &(op_common)->code);\ - usbip_net_pack_uint32_t(pack, &(op_common)->status);\ -} while (0) - -/* ---------------------------------------------------------------------- */ -/* Dummy Code */ -#define OP_UNSPEC 0x00 -#define OP_REQ_UNSPEC OP_UNSPEC -#define OP_REP_UNSPEC OP_UNSPEC - -/* ---------------------------------------------------------------------- */ -/* Retrieve USB device information. (still not used) */ -#define OP_DEVINFO 0x02 -#define OP_REQ_DEVINFO (OP_REQUEST | OP_DEVINFO) -#define OP_REP_DEVINFO (OP_REPLY | OP_DEVINFO) - -struct op_devinfo_request { - char busid[SYSFS_BUS_ID_SIZE]; -} __attribute__((packed)); - -struct op_devinfo_reply { - struct usbip_usb_device udev; - struct usbip_usb_interface uinf[]; -} __attribute__((packed)); - -/* ---------------------------------------------------------------------- */ -/* Import a remote USB device. */ -#define OP_IMPORT 0x03 -#define OP_REQ_IMPORT (OP_REQUEST | OP_IMPORT) -#define OP_REP_IMPORT (OP_REPLY | OP_IMPORT) - -struct op_import_request { - char busid[SYSFS_BUS_ID_SIZE]; -} __attribute__((packed)); - -struct op_import_reply { - struct usbip_usb_device udev; -// struct usbip_usb_interface uinf[]; -} __attribute__((packed)); - -#define PACK_OP_IMPORT_REQUEST(pack, request) do {\ -} while (0) - -#define PACK_OP_IMPORT_REPLY(pack, reply) do {\ - usbip_net_pack_usb_device(pack, &(reply)->udev);\ -} while (0) - -/* ---------------------------------------------------------------------- */ -/* Export a USB device to a remote host. */ -#define OP_EXPORT 0x06 -#define OP_REQ_EXPORT (OP_REQUEST | OP_EXPORT) -#define OP_REP_EXPORT (OP_REPLY | OP_EXPORT) - -struct op_export_request { - struct usbip_usb_device udev; -} __attribute__((packed)); - -struct op_export_reply { - int returncode; -} __attribute__((packed)); - - -#define PACK_OP_EXPORT_REQUEST(pack, request) do {\ - usbip_net_pack_usb_device(pack, &(request)->udev);\ -} while (0) - -#define PACK_OP_EXPORT_REPLY(pack, reply) do {\ -} while (0) - -/* ---------------------------------------------------------------------- */ -/* un-Export a USB device from a remote host. */ -#define OP_UNEXPORT 0x07 -#define OP_REQ_UNEXPORT (OP_REQUEST | OP_UNEXPORT) -#define OP_REP_UNEXPORT (OP_REPLY | OP_UNEXPORT) - -struct op_unexport_request { - struct usbip_usb_device udev; -} __attribute__((packed)); - -struct op_unexport_reply { - int returncode; -} __attribute__((packed)); - -#define PACK_OP_UNEXPORT_REQUEST(pack, request) do {\ - usbip_net_pack_usb_device(pack, &(request)->udev);\ -} while (0) - -#define PACK_OP_UNEXPORT_REPLY(pack, reply) do {\ -} while (0) - -/* ---------------------------------------------------------------------- */ -/* Negotiate IPSec encryption key. (still not used) */ -#define OP_CRYPKEY 0x04 -#define OP_REQ_CRYPKEY (OP_REQUEST | OP_CRYPKEY) -#define OP_REP_CRYPKEY (OP_REPLY | OP_CRYPKEY) - -struct op_crypkey_request { - /* 128bit key */ - uint32_t key[4]; -} __attribute__((packed)); - -struct op_crypkey_reply { - uint32_t __reserved; -} __attribute__((packed)); - - -/* ---------------------------------------------------------------------- */ -/* Retrieve the list of exported USB devices. */ -#define OP_DEVLIST 0x05 -#define OP_REQ_DEVLIST (OP_REQUEST | OP_DEVLIST) -#define OP_REP_DEVLIST (OP_REPLY | OP_DEVLIST) - -struct op_devlist_request { -} __attribute__((packed)); - -struct op_devlist_reply { - uint32_t ndev; - /* followed by reply_extra[] */ -} __attribute__((packed)); - -struct op_devlist_reply_extra { - struct usbip_usb_device udev; - struct usbip_usb_interface uinf[]; -} __attribute__((packed)); - -#define PACK_OP_DEVLIST_REQUEST(pack, request) do {\ -} while (0) - -#define PACK_OP_DEVLIST_REPLY(pack, reply) do {\ - usbip_net_pack_uint32_t(pack, &(reply)->ndev);\ -} while (0) - -void usbip_net_pack_uint32_t(int pack, uint32_t *num); -void usbip_net_pack_uint16_t(int pack, uint16_t *num); -void usbip_net_pack_usb_device(int pack, struct usbip_usb_device *udev); -void usbip_net_pack_usb_interface(int pack, struct usbip_usb_interface *uinf); - -ssize_t usbip_net_recv(int sockfd, void *buff, size_t bufflen); -ssize_t usbip_net_send(int sockfd, void *buff, size_t bufflen); -int usbip_net_send_op_common(int sockfd, uint32_t code, uint32_t status); -int usbip_net_recv_op_common(int sockfd, uint16_t *code); -int usbip_net_set_reuseaddr(int sockfd); -int usbip_net_set_nodelay(int sockfd); -int usbip_net_set_keepalive(int sockfd); -int usbip_net_set_v6only(int sockfd); -int usbip_net_tcp_connect(char *hostname, char *port); - -#endif /* __USBIP_NETWORK_H */ diff --git a/drivers/staging/usbip/userspace/src/usbip_port.c b/drivers/staging/usbip/userspace/src/usbip_port.c deleted file mode 100644 index a2e884fd922..00000000000 --- a/drivers/staging/usbip/userspace/src/usbip_port.c +++ /dev/null @@ -1,57 +0,0 @@ -/* - * Copyright (C) 2011 matt mooney <mfm@muteddisk.com> - * 2005-2007 Takahiro Hirofuchi - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include "vhci_driver.h" -#include "usbip_common.h" - -static int list_imported_devices(void) -{ - int i; - struct usbip_imported_device *idev; - int ret; - - ret = usbip_vhci_driver_open(); - if (ret < 0) { - err("open vhci_driver"); - return -1; - } - - printf("Imported USB devices\n"); - printf("====================\n"); - - for (i = 0; i < vhci_driver->nports; i++) { - idev = &vhci_driver->idev[i]; - - if (usbip_vhci_imported_device_dump(idev) < 0) - ret = -1; - } - - usbip_vhci_driver_close(); - - return ret; - -} - -int usbip_port_show(__attribute__((unused)) int argc, - __attribute__((unused)) char *argv[]) -{ - int ret; - - ret = list_imported_devices(); - if (ret < 0) - err("list imported devices"); - - return ret; -} diff --git a/drivers/staging/usbip/userspace/src/usbip_unbind.c b/drivers/staging/usbip/userspace/src/usbip_unbind.c deleted file mode 100644 index a4a496c9cba..00000000000 --- a/drivers/staging/usbip/userspace/src/usbip_unbind.c +++ /dev/null @@ -1,141 +0,0 @@ -/* - * Copyright (C) 2011 matt mooney <mfm@muteddisk.com> - * 2005-2007 Takahiro Hirofuchi - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include <libudev.h> - -#include <errno.h> -#include <stdio.h> -#include <string.h> - -#include <getopt.h> - -#include "usbip_common.h" -#include "utils.h" -#include "usbip.h" -#include "sysfs_utils.h" - -static const char usbip_unbind_usage_string[] = - "usbip unbind <args>\n" - " -b, --busid=<busid> Unbind " USBIP_HOST_DRV_NAME ".ko from " - "device on <busid>\n"; - -void usbip_unbind_usage(void) -{ - printf("usage: %s", usbip_unbind_usage_string); -} - -static int unbind_device(char *busid) -{ - char bus_type[] = "usb"; - int rc, ret = -1; - - char unbind_attr_name[] = "unbind"; - char unbind_attr_path[SYSFS_PATH_MAX]; - char rebind_attr_name[] = "rebind"; - char rebind_attr_path[SYSFS_PATH_MAX]; - - struct udev *udev; - struct udev_device *dev; - const char *driver; - - /* Create libudev context. */ - udev = udev_new(); - - /* Check whether the device with this bus ID exists. */ - dev = udev_device_new_from_subsystem_sysname(udev, "usb", busid); - if (!dev) { - err("device with the specified bus ID does not exist"); - goto err_close_udev; - } - - /* Check whether the device is using usbip-host driver. */ - driver = udev_device_get_driver(dev); - if (!driver || strcmp(driver, "usbip-host")) { - err("device is not bound to usbip-host driver"); - goto err_close_udev; - } - - /* Unbind device from driver. */ - snprintf(unbind_attr_path, sizeof(unbind_attr_path), "%s/%s/%s/%s/%s/%s", - SYSFS_MNT_PATH, SYSFS_BUS_NAME, bus_type, SYSFS_DRIVERS_NAME, - USBIP_HOST_DRV_NAME, unbind_attr_name); - - rc = write_sysfs_attribute(unbind_attr_path, busid, strlen(busid)); - if (rc < 0) { - err("error unbinding device %s from driver", busid); - goto err_close_udev; - } - - /* Notify driver of unbind. */ - rc = modify_match_busid(busid, 0); - if (rc < 0) { - err("unable to unbind device on %s", busid); - goto err_close_udev; - } - - /* Trigger new probing. */ - snprintf(rebind_attr_path, sizeof(unbind_attr_path), "%s/%s/%s/%s/%s/%s", - SYSFS_MNT_PATH, SYSFS_BUS_NAME, bus_type, SYSFS_DRIVERS_NAME, - USBIP_HOST_DRV_NAME, rebind_attr_name); - - rc = write_sysfs_attribute(rebind_attr_path, busid, strlen(busid)); - if (rc < 0) { - err("error rebinding"); - goto err_close_udev; - } - - ret = 0; - info("unbind device on busid %s: complete", busid); - -err_close_udev: - udev_device_unref(dev); - udev_unref(udev); - - return ret; -} - -int usbip_unbind(int argc, char *argv[]) -{ - static const struct option opts[] = { - { "busid", required_argument, NULL, 'b' }, - { NULL, 0, NULL, 0 } - }; - - int opt; - int ret = -1; - - for (;;) { - opt = getopt_long(argc, argv, "b:", opts, NULL); - - if (opt == -1) - break; - - switch (opt) { - case 'b': - ret = unbind_device(optarg); - goto out; - default: - goto err_out; - } - } - -err_out: - usbip_unbind_usage(); -out: - return ret; -} diff --git a/drivers/staging/usbip/userspace/src/usbipd.c b/drivers/staging/usbip/userspace/src/usbipd.c deleted file mode 100644 index 2f87f2d348b..00000000000 --- a/drivers/staging/usbip/userspace/src/usbipd.c +++ /dev/null @@ -1,679 +0,0 @@ -/* - * Copyright (C) 2011 matt mooney <mfm@muteddisk.com> - * 2005-2007 Takahiro Hirofuchi - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#ifdef HAVE_CONFIG_H -#include "../config.h" -#endif - -#define _GNU_SOURCE -#include <errno.h> -#include <unistd.h> -#include <netdb.h> -#include <string.h> -#include <stdlib.h> -#include <sys/types.h> -#include <sys/stat.h> -#include <arpa/inet.h> -#include <sys/socket.h> -#include <netinet/in.h> - -#ifdef HAVE_LIBWRAP -#include <tcpd.h> -#endif - -#include <getopt.h> -#include <signal.h> -#include <poll.h> - -#include "usbip_host_driver.h" -#include "usbip_common.h" -#include "usbip_network.h" -#include "list.h" - -#undef PROGNAME -#define PROGNAME "usbipd" -#define MAXSOCKFD 20 - -#define MAIN_LOOP_TIMEOUT 10 - -#define DEFAULT_PID_FILE "/var/run/" PROGNAME ".pid" - -static const char usbip_version_string[] = PACKAGE_STRING; - -static const char usbipd_help_string[] = - "usage: usbipd [options]\n" - "\n" - " -4, --ipv4\n" - " Bind to IPv4. Default is both.\n" - "\n" - " -6, --ipv6\n" - " Bind to IPv6. Default is both.\n" - "\n" - " -D, --daemon\n" - " Run as a daemon process.\n" - "\n" - " -d, --debug\n" - " Print debugging information.\n" - "\n" - " -PFILE, --pid FILE\n" - " Write process id to FILE.\n" - " If no FILE specified, use " DEFAULT_PID_FILE "\n" - "\n" - " -tPORT, --tcp-port PORT\n" - " Listen on TCP/IP port PORT.\n" - "\n" - " -h, --help\n" - " Print this help.\n" - "\n" - " -v, --version\n" - " Show version.\n"; - -static void usbipd_help(void) -{ - printf("%s\n", usbipd_help_string); -} - -static int recv_request_import(int sockfd) -{ - struct op_import_request req; - struct op_common reply; - struct usbip_exported_device *edev; - struct usbip_usb_device pdu_udev; - struct list_head *i; - int found = 0; - int error = 0; - int rc; - - memset(&req, 0, sizeof(req)); - memset(&reply, 0, sizeof(reply)); - - rc = usbip_net_recv(sockfd, &req, sizeof(req)); - if (rc < 0) { - dbg("usbip_net_recv failed: import request"); - return -1; - } - PACK_OP_IMPORT_REQUEST(0, &req); - - list_for_each(i, &host_driver->edev_list) { - edev = list_entry(i, struct usbip_exported_device, node); - if (!strncmp(req.busid, edev->udev.busid, SYSFS_BUS_ID_SIZE)) { - info("found requested device: %s", req.busid); - found = 1; - break; - } - } - - if (found) { - /* should set TCP_NODELAY for usbip */ - usbip_net_set_nodelay(sockfd); - - /* export device needs a TCP/IP socket descriptor */ - rc = usbip_host_export_device(edev, sockfd); - if (rc < 0) - error = 1; - } else { - info("requested device not found: %s", req.busid); - error = 1; - } - - rc = usbip_net_send_op_common(sockfd, OP_REP_IMPORT, - (!error ? ST_OK : ST_NA)); - if (rc < 0) { - dbg("usbip_net_send_op_common failed: %#0x", OP_REP_IMPORT); - return -1; - } - - if (error) { - dbg("import request busid %s: failed", req.busid); - return -1; - } - - memcpy(&pdu_udev, &edev->udev, sizeof(pdu_udev)); - usbip_net_pack_usb_device(1, &pdu_udev); - - rc = usbip_net_send(sockfd, &pdu_udev, sizeof(pdu_udev)); - if (rc < 0) { - dbg("usbip_net_send failed: devinfo"); - return -1; - } - - dbg("import request busid %s: complete", req.busid); - - return 0; -} - -static int send_reply_devlist(int connfd) -{ - struct usbip_exported_device *edev; - struct usbip_usb_device pdu_udev; - struct usbip_usb_interface pdu_uinf; - struct op_devlist_reply reply; - struct list_head *j; - int rc, i; - - reply.ndev = 0; - /* number of exported devices */ - list_for_each(j, &host_driver->edev_list) { - reply.ndev += 1; - } - info("exportable devices: %d", reply.ndev); - - rc = usbip_net_send_op_common(connfd, OP_REP_DEVLIST, ST_OK); - if (rc < 0) { - dbg("usbip_net_send_op_common failed: %#0x", OP_REP_DEVLIST); - return -1; - } - PACK_OP_DEVLIST_REPLY(1, &reply); - - rc = usbip_net_send(connfd, &reply, sizeof(reply)); - if (rc < 0) { - dbg("usbip_net_send failed: %#0x", OP_REP_DEVLIST); - return -1; - } - - list_for_each(j, &host_driver->edev_list) { - edev = list_entry(j, struct usbip_exported_device, node); - dump_usb_device(&edev->udev); - memcpy(&pdu_udev, &edev->udev, sizeof(pdu_udev)); - usbip_net_pack_usb_device(1, &pdu_udev); - - rc = usbip_net_send(connfd, &pdu_udev, sizeof(pdu_udev)); - if (rc < 0) { - dbg("usbip_net_send failed: pdu_udev"); - return -1; - } - - for (i = 0; i < edev->udev.bNumInterfaces; i++) { - dump_usb_interface(&edev->uinf[i]); - memcpy(&pdu_uinf, &edev->uinf[i], sizeof(pdu_uinf)); - usbip_net_pack_usb_interface(1, &pdu_uinf); - - rc = usbip_net_send(connfd, &pdu_uinf, - sizeof(pdu_uinf)); - if (rc < 0) { - err("usbip_net_send failed: pdu_uinf"); - return -1; - } - } - } - - return 0; -} - -static int recv_request_devlist(int connfd) -{ - struct op_devlist_request req; - int rc; - - memset(&req, 0, sizeof(req)); - - rc = usbip_net_recv(connfd, &req, sizeof(req)); - if (rc < 0) { - dbg("usbip_net_recv failed: devlist request"); - return -1; - } - - rc = send_reply_devlist(connfd); - if (rc < 0) { - dbg("send_reply_devlist failed"); - return -1; - } - - return 0; -} - -static int recv_pdu(int connfd) -{ - uint16_t code = OP_UNSPEC; - int ret; - - ret = usbip_net_recv_op_common(connfd, &code); - if (ret < 0) { - dbg("could not receive opcode: %#0x", code); - return -1; - } - - ret = usbip_host_refresh_device_list(); - if (ret < 0) { - dbg("could not refresh device list: %d", ret); - return -1; - } - - info("received request: %#0x(%d)", code, connfd); - switch (code) { - case OP_REQ_DEVLIST: - ret = recv_request_devlist(connfd); - break; - case OP_REQ_IMPORT: - ret = recv_request_import(connfd); - break; - case OP_REQ_DEVINFO: - case OP_REQ_CRYPKEY: - default: - err("received an unknown opcode: %#0x", code); - ret = -1; - } - - if (ret == 0) - info("request %#0x(%d): complete", code, connfd); - else - info("request %#0x(%d): failed", code, connfd); - - return ret; -} - -#ifdef HAVE_LIBWRAP -static int tcpd_auth(int connfd) -{ - struct request_info request; - int rc; - - request_init(&request, RQ_DAEMON, PROGNAME, RQ_FILE, connfd, 0); - fromhost(&request); - rc = hosts_access(&request); - if (rc == 0) - return -1; - - return 0; -} -#endif - -static int do_accept(int listenfd) -{ - int connfd; - struct sockaddr_storage ss; - socklen_t len = sizeof(ss); - char host[NI_MAXHOST], port[NI_MAXSERV]; - int rc; - - memset(&ss, 0, sizeof(ss)); - - connfd = accept(listenfd, (struct sockaddr *)&ss, &len); - if (connfd < 0) { - err("failed to accept connection"); - return -1; - } - - rc = getnameinfo((struct sockaddr *)&ss, len, host, sizeof(host), - port, sizeof(port), NI_NUMERICHOST | NI_NUMERICSERV); - if (rc) - err("getnameinfo: %s", gai_strerror(rc)); - -#ifdef HAVE_LIBWRAP - rc = tcpd_auth(connfd); - if (rc < 0) { - info("denied access from %s", host); - close(connfd); - return -1; - } -#endif - info("connection from %s:%s", host, port); - - return connfd; -} - -int process_request(int listenfd) -{ - pid_t childpid; - int connfd; - - connfd = do_accept(listenfd); - if (connfd < 0) - return -1; - childpid = fork(); - if (childpid == 0) { - close(listenfd); - recv_pdu(connfd); - exit(0); - } - close(connfd); - return 0; -} - -static void addrinfo_to_text(struct addrinfo *ai, char buf[], - const size_t buf_size) -{ - char hbuf[NI_MAXHOST]; - char sbuf[NI_MAXSERV]; - int rc; - - buf[0] = '\0'; - - rc = getnameinfo(ai->ai_addr, ai->ai_addrlen, hbuf, sizeof(hbuf), - sbuf, sizeof(sbuf), NI_NUMERICHOST | NI_NUMERICSERV); - if (rc) - err("getnameinfo: %s", gai_strerror(rc)); - - snprintf(buf, buf_size, "%s:%s", hbuf, sbuf); -} - -static int listen_all_addrinfo(struct addrinfo *ai_head, int sockfdlist[], - int maxsockfd) -{ - struct addrinfo *ai; - int ret, nsockfd = 0; - const size_t ai_buf_size = NI_MAXHOST + NI_MAXSERV + 2; - char ai_buf[ai_buf_size]; - - for (ai = ai_head; ai && nsockfd < maxsockfd; ai = ai->ai_next) { - int sock; - - addrinfo_to_text(ai, ai_buf, ai_buf_size); - dbg("opening %s", ai_buf); - sock = socket(ai->ai_family, ai->ai_socktype, ai->ai_protocol); - if (sock < 0) { - err("socket: %s: %d (%s)", - ai_buf, errno, strerror(errno)); - continue; - } - - usbip_net_set_reuseaddr(sock); - usbip_net_set_nodelay(sock); - /* We use seperate sockets for IPv4 and IPv6 - * (see do_standalone_mode()) */ - usbip_net_set_v6only(sock); - - if (sock >= FD_SETSIZE) { - err("FD_SETSIZE: %s: sock=%d, max=%d", - ai_buf, sock, FD_SETSIZE); - close(sock); - continue; - } - - ret = bind(sock, ai->ai_addr, ai->ai_addrlen); - if (ret < 0) { - err("bind: %s: %d (%s)", - ai_buf, errno, strerror(errno)); - close(sock); - continue; - } - - ret = listen(sock, SOMAXCONN); - if (ret < 0) { - err("listen: %s: %d (%s)", - ai_buf, errno, strerror(errno)); - close(sock); - continue; - } - - info("listening on %s", ai_buf); - sockfdlist[nsockfd++] = sock; - } - - return nsockfd; -} - -static struct addrinfo *do_getaddrinfo(char *host, int ai_family) -{ - struct addrinfo hints, *ai_head; - int rc; - - memset(&hints, 0, sizeof(hints)); - hints.ai_family = ai_family; - hints.ai_socktype = SOCK_STREAM; - hints.ai_flags = AI_PASSIVE; - - rc = getaddrinfo(host, usbip_port_string, &hints, &ai_head); - if (rc) { - err("failed to get a network address %s: %s", usbip_port_string, - gai_strerror(rc)); - return NULL; - } - - return ai_head; -} - -static void signal_handler(int i) -{ - dbg("received '%s' signal", strsignal(i)); -} - -static void set_signal(void) -{ - struct sigaction act; - - memset(&act, 0, sizeof(act)); - act.sa_handler = signal_handler; - sigemptyset(&act.sa_mask); - sigaction(SIGTERM, &act, NULL); - sigaction(SIGINT, &act, NULL); - act.sa_handler = SIG_IGN; - sigaction(SIGCLD, &act, NULL); -} - -static const char *pid_file; - -static void write_pid_file(void) -{ - if (pid_file) { - dbg("creating pid file %s", pid_file); - FILE *fp; - - fp = fopen(pid_file, "w"); - if (!fp) { - err("pid_file: %s: %d (%s)", - pid_file, errno, strerror(errno)); - return; - } - fprintf(fp, "%d\n", getpid()); - fclose(fp); - } -} - -static void remove_pid_file(void) -{ - if (pid_file) { - dbg("removing pid file %s", pid_file); - unlink(pid_file); - } -} - -static int do_standalone_mode(int daemonize, int ipv4, int ipv6) -{ - struct addrinfo *ai_head; - int sockfdlist[MAXSOCKFD]; - int nsockfd, family; - int i, terminate; - struct pollfd *fds; - struct timespec timeout; - sigset_t sigmask; - - if (usbip_host_driver_open()) { - err("please load " USBIP_CORE_MOD_NAME ".ko and " - USBIP_HOST_DRV_NAME ".ko!"); - return -1; - } - - if (daemonize) { - if (daemon(0, 0) < 0) { - err("daemonizing failed: %s", strerror(errno)); - usbip_host_driver_close(); - return -1; - } - umask(0); - usbip_use_syslog = 1; - } - set_signal(); - write_pid_file(); - - info("starting " PROGNAME " (%s)", usbip_version_string); - - /* - * To suppress warnings on systems with bindv6only disabled - * (default), we use seperate sockets for IPv6 and IPv4 and set - * IPV6_V6ONLY on the IPv6 sockets. - */ - if (ipv4 && ipv6) - family = AF_UNSPEC; - else if (ipv4) - family = AF_INET; - else - family = AF_INET6; - - ai_head = do_getaddrinfo(NULL, family); - if (!ai_head) { - usbip_host_driver_close(); - return -1; - } - nsockfd = listen_all_addrinfo(ai_head, sockfdlist, - sizeof(sockfdlist) / sizeof(*sockfdlist)); - freeaddrinfo(ai_head); - if (nsockfd <= 0) { - err("failed to open a listening socket"); - usbip_host_driver_close(); - return -1; - } - - dbg("listening on %d address%s", nsockfd, (nsockfd == 1) ? "" : "es"); - - fds = calloc(nsockfd, sizeof(struct pollfd)); - for (i = 0; i < nsockfd; i++) { - fds[i].fd = sockfdlist[i]; - fds[i].events = POLLIN; - } - timeout.tv_sec = MAIN_LOOP_TIMEOUT; - timeout.tv_nsec = 0; - - sigfillset(&sigmask); - sigdelset(&sigmask, SIGTERM); - sigdelset(&sigmask, SIGINT); - - terminate = 0; - while (!terminate) { - int r; - - r = ppoll(fds, nsockfd, &timeout, &sigmask); - if (r < 0) { - dbg("%s", strerror(errno)); - terminate = 1; - } else if (r) { - for (i = 0; i < nsockfd; i++) { - if (fds[i].revents & POLLIN) { - dbg("read event on fd[%d]=%d", - i, sockfdlist[i]); - process_request(sockfdlist[i]); - } - } - } else { - dbg("heartbeat timeout on ppoll()"); - } - } - - info("shutting down " PROGNAME); - free(fds); - usbip_host_driver_close(); - - return 0; -} - -int main(int argc, char *argv[]) -{ - static const struct option longopts[] = { - { "ipv4", no_argument, NULL, '4' }, - { "ipv6", no_argument, NULL, '6' }, - { "daemon", no_argument, NULL, 'D' }, - { "daemon", no_argument, NULL, 'D' }, - { "debug", no_argument, NULL, 'd' }, - { "pid", optional_argument, NULL, 'P' }, - { "tcp-port", required_argument, NULL, 't' }, - { "help", no_argument, NULL, 'h' }, - { "version", no_argument, NULL, 'v' }, - { NULL, 0, NULL, 0 } - }; - - enum { - cmd_standalone_mode = 1, - cmd_help, - cmd_version - } cmd; - - int daemonize = 0; - int ipv4 = 0, ipv6 = 0; - int opt, rc = -1; - - pid_file = NULL; - - usbip_use_stderr = 1; - usbip_use_syslog = 0; - - if (geteuid() != 0) - err("not running as root?"); - - cmd = cmd_standalone_mode; - for (;;) { - opt = getopt_long(argc, argv, "46DdP::t:hv", longopts, NULL); - - if (opt == -1) - break; - - switch (opt) { - case '4': - ipv4 = 1; - break; - case '6': - ipv6 = 1; - break; - case 'D': - daemonize = 1; - break; - case 'd': - usbip_use_debug = 1; - break; - case 'h': - cmd = cmd_help; - break; - case 'P': - pid_file = optarg ? optarg : DEFAULT_PID_FILE; - break; - case 't': - usbip_setup_port_number(optarg); - break; - case 'v': - cmd = cmd_version; - break; - case '?': - usbipd_help(); - default: - goto err_out; - } - } - - if (!ipv4 && !ipv6) - ipv4 = ipv6 = 1; - - switch (cmd) { - case cmd_standalone_mode: - rc = do_standalone_mode(daemonize, ipv4, ipv6); - remove_pid_file(); - break; - case cmd_version: - printf(PROGNAME " (%s)\n", usbip_version_string); - rc = 0; - break; - case cmd_help: - usbipd_help(); - rc = 0; - break; - default: - usbipd_help(); - goto err_out; - } - -err_out: - return (rc > -1 ? EXIT_SUCCESS : EXIT_FAILURE); -} diff --git a/drivers/staging/usbip/userspace/src/utils.c b/drivers/staging/usbip/userspace/src/utils.c deleted file mode 100644 index 2b3d6d23501..00000000000 --- a/drivers/staging/usbip/userspace/src/utils.c +++ /dev/null @@ -1,52 +0,0 @@ -/* - * Copyright (C) 2011 matt mooney <mfm@muteddisk.com> - * 2005-2007 Takahiro Hirofuchi - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include <errno.h> -#include <stdio.h> -#include <string.h> - -#include "usbip_common.h" -#include "utils.h" -#include "sysfs_utils.h" - -int modify_match_busid(char *busid, int add) -{ - char attr_name[] = "match_busid"; - char command[SYSFS_BUS_ID_SIZE + 4]; - char match_busid_attr_path[SYSFS_PATH_MAX]; - int rc; - - snprintf(match_busid_attr_path, sizeof(match_busid_attr_path), - "%s/%s/%s/%s/%s/%s", SYSFS_MNT_PATH, SYSFS_BUS_NAME, - SYSFS_BUS_TYPE, SYSFS_DRIVERS_NAME, USBIP_HOST_DRV_NAME, - attr_name); - - if (add) - snprintf(command, SYSFS_BUS_ID_SIZE + 4, "add %s", busid); - else - snprintf(command, SYSFS_BUS_ID_SIZE + 4, "del %s", busid); - - rc = write_sysfs_attribute(match_busid_attr_path, command, - sizeof(command)); - if (rc < 0) { - dbg("failed to write match_busid: %s", strerror(errno)); - return -1; - } - - return 0; -} diff --git a/drivers/staging/usbip/userspace/src/utils.h b/drivers/staging/usbip/userspace/src/utils.h deleted file mode 100644 index 5916fd3e02a..00000000000 --- a/drivers/staging/usbip/userspace/src/utils.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * Copyright (C) 2011 matt mooney <mfm@muteddisk.com> - * 2005-2007 Takahiro Hirofuchi - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#ifndef __UTILS_H -#define __UTILS_H - -int modify_match_busid(char *busid, int add); - -#endif /* __UTILS_H */ - diff --git a/drivers/thunderbolt/path.c b/drivers/thunderbolt/path.c index 8fcf8a7b6c2..9562cd026dc 100644 --- a/drivers/thunderbolt/path.c +++ b/drivers/thunderbolt/path.c @@ -150,7 +150,26 @@ int tb_path_activate(struct tb_path *path) /* Activate hops. */ for (i = path->path_length - 1; i >= 0; i--) { - struct tb_regs_hop hop; + struct tb_regs_hop hop = { 0 }; + + /* + * We do (currently) not tear down paths setup by the firmeware. + * If a firmware device is unplugged and plugged in again then + * it can happen that we reuse some of the hops from the (now + * defunct) firmeware path. This causes the hotplug operation to + * fail (the pci device does not show up). Clearing the hop + * before overwriting it fixes the problem. + * + * Should be removed once we discover and tear down firmeware + * paths. + */ + res = tb_port_write(path->hops[i].in_port, &hop, TB_CFG_HOPS, + 2 * path->hops[i].in_hop_index, 2); + if (res) { + __tb_path_deactivate_hops(path, i); + __tb_path_deallocate_nfc(path, 0); + goto err; + } /* dword 0 */ hop.next_hop = path->hops[i].next_hop_index; diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index e0cad441808..cf1b19bca30 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -92,6 +92,8 @@ source "drivers/usb/storage/Kconfig" source "drivers/usb/image/Kconfig" +source "drivers/usb/usbip/Kconfig" + endif source "drivers/usb/musb/Kconfig" diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile index 3cba892b83a..d7be7177805 100644 --- a/drivers/usb/Makefile +++ b/drivers/usb/Makefile @@ -60,3 +60,5 @@ obj-$(CONFIG_USB_RENESAS_USBHS) += renesas_usbhs/ obj-$(CONFIG_USB_GADGET) += gadget/ obj-$(CONFIG_USB_COMMON) += common/ + +obj-$(CONFIG_USBIP_CORE) += usbip/ diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 8a4dcbc7a75..46f5161c789 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1728,8 +1728,14 @@ static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id) * - Change autosuspend delay of hub can avoid unnecessary auto * suspend timer for hub, also may decrease power consumption * of USB bus. + * + * - If user has indicated to prevent autosuspend by passing + * usbcore.autosuspend = -1 then keep autosuspend disabled. */ - pm_runtime_set_autosuspend_delay(&hdev->dev, 0); +#ifdef CONFIG_PM_RUNTIME + if (hdev->dev.power.autosuspend_delay >= 0) + pm_runtime_set_autosuspend_delay(&hdev->dev, 0); +#endif /* * Hubs have proper suspend/resume support, except for root hubs @@ -2107,8 +2113,8 @@ void usb_disconnect(struct usb_device **pdev) { struct usb_port *port_dev = NULL; struct usb_device *udev = *pdev; - struct usb_hub *hub; - int port1; + struct usb_hub *hub = NULL; + int port1 = 1; /* mark the device as inactive, so any further urb submissions for * this device (and any of its children) will fail immediately. @@ -4631,9 +4637,7 @@ static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus, if (status != -ENODEV && port1 != unreliable_port && printk_ratelimit()) - dev_err(&udev->dev, "connect-debounce failed, port %d disabled\n", - port1); - + dev_err(&port_dev->dev, "connect-debounce failed\n"); portstatus &= ~USB_PORT_STAT_CONNECTION; unreliable_port = port1; } else { diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c index 0ba9c335b58..7c9618e916e 100644 --- a/drivers/usb/dwc2/gadget.c +++ b/drivers/usb/dwc2/gadget.c @@ -1901,7 +1901,7 @@ static void s3c_hsotg_epint(struct s3c_hsotg *hsotg, unsigned int idx, static void s3c_hsotg_irq_enumdone(struct s3c_hsotg *hsotg) { u32 dsts = readl(hsotg->regs + DSTS); - int ep0_mps = 0, ep_mps; + int ep0_mps = 0, ep_mps = 8; /* * This should signal the finish of the enumeration phase diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c index ef4936ff626..9dcfbe7cd5f 100644 --- a/drivers/usb/dwc3/dwc3-omap.c +++ b/drivers/usb/dwc3/dwc3-omap.c @@ -425,7 +425,7 @@ static void dwc3_omap_set_utmi_mode(struct dwc3_omap *omap) static int dwc3_omap_extcon_register(struct dwc3_omap *omap) { - u32 ret; + int ret; struct device_node *node = omap->dev->of_node; struct extcon_dev *edev; diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile index a186afeaa70..9add915d41f 100644 --- a/drivers/usb/gadget/Makefile +++ b/drivers/usb/gadget/Makefile @@ -3,7 +3,7 @@ # subdir-ccflags-$(CONFIG_USB_GADGET_DEBUG) := -DDEBUG subdir-ccflags-$(CONFIG_USB_GADGET_VERBOSE) += -DVERBOSE_DEBUG -ccflags-y += -I$(PWD)/drivers/usb/gadget/udc +ccflags-y += -Idrivers/usb/gadget/udc obj-$(CONFIG_USB_LIBCOMPOSITE) += libcomposite.o libcomposite-y := usbstring.o config.o epautoconf.o diff --git a/drivers/usb/gadget/function/Makefile b/drivers/usb/gadget/function/Makefile index 6d91f21b52a..83ae1065149 100644 --- a/drivers/usb/gadget/function/Makefile +++ b/drivers/usb/gadget/function/Makefile @@ -2,8 +2,8 @@ # USB peripheral controller drivers # -ccflags-y := -I$(PWD)/drivers/usb/gadget/ -ccflags-y += -I$(PWD)/drivers/usb/gadget/udc/ +ccflags-y := -Idrivers/usb/gadget/ +ccflags-y += -Idrivers/usb/gadget/udc/ # USB Functions usb_f_acm-y := f_acm.o diff --git a/drivers/usb/gadget/function/u_ether.c b/drivers/usb/gadget/function/u_ether.c index d50adda913c..6e6f87656e7 100644 --- a/drivers/usb/gadget/function/u_ether.c +++ b/drivers/usb/gadget/function/u_ether.c @@ -1127,10 +1127,7 @@ void gether_disconnect(struct gether *link) DBG(dev, "%s\n", __func__); - netif_tx_lock(dev->net); netif_stop_queue(dev->net); - netif_tx_unlock(dev->net); - netif_carrier_off(dev->net); /* disable endpoints, forcing (synchronous) completion diff --git a/drivers/usb/gadget/function/uvc_video.c b/drivers/usb/gadget/function/uvc_video.c index 71e896d4c5a..a5eb9a3fbb7 100644 --- a/drivers/usb/gadget/function/uvc_video.c +++ b/drivers/usb/gadget/function/uvc_video.c @@ -195,6 +195,7 @@ uvc_video_complete(struct usb_ep *ep, struct usb_request *req) printk(KERN_INFO "Failed to queue request (%d).\n", ret); usb_ep_set_halt(ep); spin_unlock_irqrestore(&video->queue.irqlock, flags); + uvc_queue_cancel(queue, 0); goto requeue; } spin_unlock_irqrestore(&video->queue.irqlock, flags); @@ -281,6 +282,7 @@ error: static int uvc_video_pump(struct uvc_video *video) { + struct uvc_video_queue *queue = &video->queue; struct usb_request *req; struct uvc_buffer *buf; unsigned long flags; @@ -322,6 +324,7 @@ uvc_video_pump(struct uvc_video *video) printk(KERN_INFO "Failed to queue request (%d)\n", ret); usb_ep_set_halt(video->ep); spin_unlock_irqrestore(&video->queue.irqlock, flags); + uvc_queue_cancel(queue, 0); break; } spin_unlock_irqrestore(&video->queue.irqlock, flags); diff --git a/drivers/usb/gadget/legacy/Makefile b/drivers/usb/gadget/legacy/Makefile index a11aad5635d..edba2d1ee0f 100644 --- a/drivers/usb/gadget/legacy/Makefile +++ b/drivers/usb/gadget/legacy/Makefile @@ -2,9 +2,9 @@ # USB gadget drivers # -ccflags-y := -I$(PWD)/drivers/usb/gadget/ -ccflags-y += -I$(PWD)/drivers/usb/gadget/udc/ -ccflags-y += -I$(PWD)/drivers/usb/gadget/function/ +ccflags-y := -Idrivers/usb/gadget/ +ccflags-y += -Idrivers/usb/gadget/udc/ +ccflags-y += -Idrivers/usb/gadget/function/ g_zero-y := zero.o g_audio-y := audio.o diff --git a/drivers/usb/gadget/legacy/dbgp.c b/drivers/usb/gadget/legacy/dbgp.c index 986fc511a2e..225e385a616 100644 --- a/drivers/usb/gadget/legacy/dbgp.c +++ b/drivers/usb/gadget/legacy/dbgp.c @@ -222,10 +222,12 @@ static void dbgp_unbind(struct usb_gadget *gadget) { #ifdef CONFIG_USB_G_DBGP_SERIAL kfree(dbgp.serial); + dbgp.serial = NULL; #endif if (dbgp.req) { kfree(dbgp.req->buf); usb_ep_free_request(gadget->ep0, dbgp.req); + dbgp.req = NULL; } gadget->ep0->driver_data = NULL; diff --git a/drivers/usb/gadget/legacy/inode.c b/drivers/usb/gadget/legacy/inode.c index 2e4ce770490..e96077b8bf7 100644 --- a/drivers/usb/gadget/legacy/inode.c +++ b/drivers/usb/gadget/legacy/inode.c @@ -440,7 +440,7 @@ ep_write (struct file *fd, const char __user *buf, size_t len, loff_t *ptr) value = -ENOMEM; kbuf = memdup_user(buf, len); - if (!kbuf) { + if (IS_ERR(kbuf)) { value = PTR_ERR(kbuf); goto free1; } diff --git a/drivers/usb/gadget/udc/Kconfig b/drivers/usb/gadget/udc/Kconfig index 5151f947a4f..34ebaa68504 100644 --- a/drivers/usb/gadget/udc/Kconfig +++ b/drivers/usb/gadget/udc/Kconfig @@ -332,7 +332,7 @@ config USB_GOKU gadget drivers to also be dynamically linked. config USB_EG20T - tristate "Intel EG20T PCH/LAPIS Semiconductor IOH(ML7213/ML7831) UDC" + tristate "Intel QUARK X1000/EG20T PCH/LAPIS Semiconductor IOH(ML7213/ML7831) UDC" depends on PCI help This is a USB device driver for EG20T PCH. @@ -353,6 +353,7 @@ config USB_EG20T ML7213/ML7831 is companion chip for Intel Atom E6xx series. ML7213/ML7831 is completely compatible for Intel EG20T PCH. + This driver can be used with Intel's Quark X1000 SOC platform # # LAST -- dummy/emulated controller # diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c index 906e65f0e4f..c9fe67e29d3 100644 --- a/drivers/usb/gadget/udc/atmel_usba_udc.c +++ b/drivers/usb/gadget/udc/atmel_usba_udc.c @@ -1661,7 +1661,7 @@ static irqreturn_t usba_udc_irq(int irq, void *devid) if (dma_status) { int i; - for (i = 1; i < USBA_NR_DMAS; i++) + for (i = 1; i <= USBA_NR_DMAS; i++) if (dma_status & (1 << i)) usba_dma_irq(udc, &udc->usba_ep[i]); } diff --git a/drivers/usb/gadget/udc/fusb300_udc.c b/drivers/usb/gadget/udc/fusb300_udc.c index d40255f784d..5c5d1adda7e 100644 --- a/drivers/usb/gadget/udc/fusb300_udc.c +++ b/drivers/usb/gadget/udc/fusb300_udc.c @@ -1398,13 +1398,17 @@ static int fusb300_probe(struct platform_device *pdev) /* initialize udc */ fusb300 = kzalloc(sizeof(struct fusb300), GFP_KERNEL); - if (fusb300 == NULL) + if (fusb300 == NULL) { + ret = -ENOMEM; goto clean_up; + } for (i = 0; i < FUSB300_MAX_NUM_EP; i++) { _ep[i] = kzalloc(sizeof(struct fusb300_ep), GFP_KERNEL); - if (_ep[i] == NULL) + if (_ep[i] == NULL) { + ret = -ENOMEM; goto clean_up; + } fusb300->ep[i] = _ep[i]; } diff --git a/drivers/usb/gadget/udc/pch_udc.c b/drivers/usb/gadget/udc/pch_udc.c index eb8c3bedb57..460d953c91b 100644 --- a/drivers/usb/gadget/udc/pch_udc.c +++ b/drivers/usb/gadget/udc/pch_udc.c @@ -343,6 +343,7 @@ struct pch_vbus_gpio_data { * @setup_data: Received setup data * @phys_addr: of device memory * @base_addr: for mapped device memory + * @bar: Indicates which PCI BAR for USB regs * @irq: IRQ line for the device * @cfg_data: current cfg, intf, and alt in use * @vbus_gpio: GPIO informaton for detecting VBUS @@ -370,14 +371,17 @@ struct pch_udc_dev { struct usb_ctrlrequest setup_data; unsigned long phys_addr; void __iomem *base_addr; + unsigned bar; unsigned irq; struct pch_udc_cfg_data cfg_data; struct pch_vbus_gpio_data vbus_gpio; }; #define to_pch_udc(g) (container_of((g), struct pch_udc_dev, gadget)) +#define PCH_UDC_PCI_BAR_QUARK_X1000 0 #define PCH_UDC_PCI_BAR 1 #define PCI_DEVICE_ID_INTEL_EG20T_UDC 0x8808 +#define PCI_DEVICE_ID_INTEL_QUARK_X1000_UDC 0x0939 #define PCI_VENDOR_ID_ROHM 0x10DB #define PCI_DEVICE_ID_ML7213_IOH_UDC 0x801D #define PCI_DEVICE_ID_ML7831_IOH_UDC 0x8808 @@ -3076,7 +3080,7 @@ static void pch_udc_remove(struct pci_dev *pdev) iounmap(dev->base_addr); if (dev->mem_region) release_mem_region(dev->phys_addr, - pci_resource_len(pdev, PCH_UDC_PCI_BAR)); + pci_resource_len(pdev, dev->bar)); if (dev->active) pci_disable_device(pdev); kfree(dev); @@ -3144,9 +3148,15 @@ static int pch_udc_probe(struct pci_dev *pdev, dev->active = 1; pci_set_drvdata(pdev, dev); + /* Determine BAR based on PCI ID */ + if (id->device == PCI_DEVICE_ID_INTEL_QUARK_X1000_UDC) + dev->bar = PCH_UDC_PCI_BAR_QUARK_X1000; + else + dev->bar = PCH_UDC_PCI_BAR; + /* PCI resource allocation */ - resource = pci_resource_start(pdev, 1); - len = pci_resource_len(pdev, 1); + resource = pci_resource_start(pdev, dev->bar); + len = pci_resource_len(pdev, dev->bar); if (!request_mem_region(resource, len, KBUILD_MODNAME)) { dev_err(&pdev->dev, "%s: pci device used already\n", __func__); @@ -3212,6 +3222,12 @@ finished: static const struct pci_device_id pch_udc_pcidev_id[] = { { + PCI_DEVICE(PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_QUARK_X1000_UDC), + .class = (PCI_CLASS_SERIAL_USB << 8) | 0xfe, + .class_mask = 0xffffffff, + }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_EG20T_UDC), .class = (PCI_CLASS_SERIAL_USB << 8) | 0xfe, .class_mask = 0xffffffff, diff --git a/drivers/usb/gadget/udc/r8a66597-udc.c b/drivers/usb/gadget/udc/r8a66597-udc.c index 46008421c1e..de2a8713b42 100644 --- a/drivers/usb/gadget/udc/r8a66597-udc.c +++ b/drivers/usb/gadget/udc/r8a66597-udc.c @@ -1868,8 +1868,8 @@ static int r8a66597_probe(struct platform_device *pdev) res = platform_get_resource(pdev, IORESOURCE_MEM, 0); reg = devm_ioremap_resource(&pdev->dev, res); - if (!reg) - return -ENODEV; + if (IS_ERR(reg)) + return PTR_ERR(reg); ires = platform_get_resource(pdev, IORESOURCE_IRQ, 0); irq = ires->start; diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index cc305c71ac3..6130b757490 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -1230,7 +1230,7 @@ int ehci_hub_control( if (selector == EHSET_TEST_SINGLE_STEP_SET_FEATURE) { spin_unlock_irqrestore(&ehci->lock, flags); retval = ehset_single_step_set_feature(hcd, - wIndex); + wIndex + 1); spin_lock_irqsave(&ehci->lock, flags); break; } diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 687d3660815..c22a3e15a16 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -101,6 +101,10 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) /* AMD PLL quirk */ if (pdev->vendor == PCI_VENDOR_ID_AMD && usb_amd_find_chipset_info()) xhci->quirks |= XHCI_AMD_PLL_FIX; + + if (pdev->vendor == PCI_VENDOR_ID_AMD) + xhci->quirks |= XHCI_TRUST_TX_LENGTH; + if (pdev->vendor == PCI_VENDOR_ID_INTEL) { xhci->quirks |= XHCI_LPM_SUPPORT; xhci->quirks |= XHCI_INTEL_HOST; @@ -151,6 +155,11 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) if (pdev->vendor == PCI_VENDOR_ID_VIA) xhci->quirks |= XHCI_RESET_ON_RESUME; + /* See https://bugzilla.kernel.org/show_bug.cgi?id=79511 */ + if (pdev->vendor == PCI_VENDOR_ID_VIA && + pdev->device == 0x3432) + xhci->quirks |= XHCI_BROKEN_STREAMS; + if (xhci->quirks & XHCI_RESET_ON_RESUME) xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, "QUIRK: Resetting on resume"); diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 60fb52ae864..abed30b8290 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -364,32 +364,6 @@ static void ring_doorbell_for_active_rings(struct xhci_hcd *xhci, } } -/* - * Find the segment that trb is in. Start searching in start_seg. - * If we must move past a segment that has a link TRB with a toggle cycle state - * bit set, then we will toggle the value pointed at by cycle_state. - */ -static struct xhci_segment *find_trb_seg( - struct xhci_segment *start_seg, - union xhci_trb *trb, int *cycle_state) -{ - struct xhci_segment *cur_seg = start_seg; - struct xhci_generic_trb *generic_trb; - - while (cur_seg->trbs > trb || - &cur_seg->trbs[TRBS_PER_SEGMENT - 1] < trb) { - generic_trb = &cur_seg->trbs[TRBS_PER_SEGMENT - 1].generic; - if (generic_trb->field[3] & cpu_to_le32(LINK_TOGGLE)) - *cycle_state ^= 0x1; - cur_seg = cur_seg->next; - if (cur_seg == start_seg) - /* Looped over the entire list. Oops! */ - return NULL; - } - return cur_seg; -} - - static struct xhci_ring *xhci_triad_to_transfer_ring(struct xhci_hcd *xhci, unsigned int slot_id, unsigned int ep_index, unsigned int stream_id) @@ -459,9 +433,12 @@ void xhci_find_new_dequeue_state(struct xhci_hcd *xhci, struct xhci_virt_device *dev = xhci->devs[slot_id]; struct xhci_virt_ep *ep = &dev->eps[ep_index]; struct xhci_ring *ep_ring; - struct xhci_generic_trb *trb; + struct xhci_segment *new_seg; + union xhci_trb *new_deq; dma_addr_t addr; u64 hw_dequeue; + bool cycle_found = false; + bool td_last_trb_found = false; ep_ring = xhci_triad_to_transfer_ring(xhci, slot_id, ep_index, stream_id); @@ -486,45 +463,45 @@ void xhci_find_new_dequeue_state(struct xhci_hcd *xhci, hw_dequeue = le64_to_cpu(ep_ctx->deq); } - /* Find virtual address and segment of hardware dequeue pointer */ - state->new_deq_seg = ep_ring->deq_seg; - state->new_deq_ptr = ep_ring->dequeue; - while (xhci_trb_virt_to_dma(state->new_deq_seg, state->new_deq_ptr) - != (dma_addr_t)(hw_dequeue & ~0xf)) { - next_trb(xhci, ep_ring, &state->new_deq_seg, - &state->new_deq_ptr); - if (state->new_deq_ptr == ep_ring->dequeue) { - WARN_ON(1); - return; - } - } + new_seg = ep_ring->deq_seg; + new_deq = ep_ring->dequeue; + state->new_cycle_state = hw_dequeue & 0x1; + /* - * Find cycle state for last_trb, starting at old cycle state of - * hw_dequeue. If there is only one segment ring, find_trb_seg() will - * return immediately and cannot toggle the cycle state if this search - * wraps around, so add one more toggle manually in that case. + * We want to find the pointer, segment and cycle state of the new trb + * (the one after current TD's last_trb). We know the cycle state at + * hw_dequeue, so walk the ring until both hw_dequeue and last_trb are + * found. */ - state->new_cycle_state = hw_dequeue & 0x1; - if (ep_ring->first_seg == ep_ring->first_seg->next && - cur_td->last_trb < state->new_deq_ptr) - state->new_cycle_state ^= 0x1; + do { + if (!cycle_found && xhci_trb_virt_to_dma(new_seg, new_deq) + == (dma_addr_t)(hw_dequeue & ~0xf)) { + cycle_found = true; + if (td_last_trb_found) + break; + } + if (new_deq == cur_td->last_trb) + td_last_trb_found = true; - state->new_deq_ptr = cur_td->last_trb; - xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb, - "Finding segment containing last TRB in TD."); - state->new_deq_seg = find_trb_seg(state->new_deq_seg, - state->new_deq_ptr, &state->new_cycle_state); - if (!state->new_deq_seg) { - WARN_ON(1); - return; - } + if (cycle_found && + TRB_TYPE_LINK_LE32(new_deq->generic.field[3]) && + new_deq->generic.field[3] & cpu_to_le32(LINK_TOGGLE)) + state->new_cycle_state ^= 0x1; + + next_trb(xhci, ep_ring, &new_seg, &new_deq); + + /* Search wrapped around, bail out */ + if (new_deq == ep->ring->dequeue) { + xhci_err(xhci, "Error: Failed finding new dequeue state\n"); + state->new_deq_seg = NULL; + state->new_deq_ptr = NULL; + return; + } + + } while (!cycle_found || !td_last_trb_found); - /* Increment to find next TRB after last_trb. Cycle if appropriate. */ - trb = &state->new_deq_ptr->generic; - if (TRB_TYPE_LINK_LE32(trb->field[3]) && - (trb->field[3] & cpu_to_le32(LINK_TOGGLE))) - state->new_cycle_state ^= 0x1; - next_trb(xhci, ep_ring, &state->new_deq_seg, &state->new_deq_ptr); + state->new_deq_seg = new_seg; + state->new_deq_ptr = new_deq; /* Don't update the ring cycle state for the producer (us). */ xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb, @@ -2487,7 +2464,8 @@ static int handle_tx_event(struct xhci_hcd *xhci, * last TRB of the previous TD. The command completion handle * will take care the rest. */ - if (!event_seg && trb_comp_code == COMP_STOP_INVAL) { + if (!event_seg && (trb_comp_code == COMP_STOP || + trb_comp_code == COMP_STOP_INVAL)) { ret = 0; goto cleanup; } diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index b6f21175b87..c020b094fe7 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -2880,6 +2880,9 @@ void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci, ep_index, ep->stopped_stream, ep->stopped_td, &deq_state); + if (!deq_state.new_deq_ptr || !deq_state.new_deq_seg) + return; + /* HW with the reset endpoint quirk will use the saved dequeue state to * issue a configure endpoint command later. */ diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c index 06b5d77cd9a..633caf64312 100644 --- a/drivers/usb/misc/sisusbvga/sisusb.c +++ b/drivers/usb/misc/sisusbvga/sisusb.c @@ -3250,6 +3250,7 @@ static const struct usb_device_id sisusb_table[] = { { USB_DEVICE(0x0711, 0x0918) }, { USB_DEVICE(0x0711, 0x0920) }, { USB_DEVICE(0x0711, 0x0950) }, + { USB_DEVICE(0x0711, 0x5200) }, { USB_DEVICE(0x182d, 0x021c) }, { USB_DEVICE(0x182d, 0x0269) }, { } diff --git a/drivers/usb/musb/ux500_dma.c b/drivers/usb/musb/ux500_dma.c index 9aad00f11bd..221faed9f07 100644 --- a/drivers/usb/musb/ux500_dma.c +++ b/drivers/usb/musb/ux500_dma.c @@ -96,7 +96,7 @@ static bool ux500_configure_channel(struct dma_channel *channel, struct musb *musb = ux500_channel->controller->private_data; dev_dbg(musb->controller, - "packet_sz=%d, mode=%d, dma_addr=0x%llu, len=%d is_tx=%d\n", + "packet_sz=%d, mode=%d, dma_addr=0x%llx, len=%d is_tx=%d\n", packet_sz, mode, (unsigned long long) dma_addr, len, ux500_channel->is_tx); diff --git a/drivers/usb/phy/phy-gpio-vbus-usb.c b/drivers/usb/phy/phy-gpio-vbus-usb.c index ea9e705555d..f4b14bd97e1 100644 --- a/drivers/usb/phy/phy-gpio-vbus-usb.c +++ b/drivers/usb/phy/phy-gpio-vbus-usb.c @@ -260,10 +260,8 @@ static int gpio_vbus_probe(struct platform_device *pdev) gpio_vbus->phy.otg = devm_kzalloc(&pdev->dev, sizeof(struct usb_otg), GFP_KERNEL); - if (!gpio_vbus->phy.otg) { - kfree(gpio_vbus); + if (!gpio_vbus->phy.otg) return -ENOMEM; - } platform_set_drvdata(pdev, gpio_vbus); gpio_vbus->dev = &pdev->dev; diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c index e4108eec5ef..afc09087ec3 100644 --- a/drivers/usb/phy/phy-msm-usb.c +++ b/drivers/usb/phy/phy-msm-usb.c @@ -1601,8 +1601,8 @@ static int msm_otg_probe(struct platform_device *pdev) */ if (motg->phy_number) { phy_select = devm_ioremap_nocache(&pdev->dev, USB2_PHY_SEL, 4); - if (IS_ERR(phy_select)) - return PTR_ERR(phy_select); + if (!phy_select) + return -ENOMEM; /* Enable second PHY with the OTG port */ writel(0x1, phy_select); } diff --git a/drivers/usb/phy/phy-samsung-usb.h b/drivers/usb/phy/phy-samsung-usb.h index 68771bfd182..80eedd45a20 100644 --- a/drivers/usb/phy/phy-samsung-usb.h +++ b/drivers/usb/phy/phy-samsung-usb.h @@ -216,7 +216,7 @@ #define EXYNOS5_DRD_PHYPARAM1 (0x20) -#define PHYPARAM1_PCS_TXDEEMPH_MASK (0x1f << 0) +#define PHYPARAM1_PCS_TXDEEMPH_MASK (0x3f << 0) #define PHYPARAM1_PCS_TXDEEMPH (0x1c) #define EXYNOS5_DRD_PHYTERM (0x24) diff --git a/drivers/usb/phy/phy.c b/drivers/usb/phy/phy.c index 6d0f6080ece..045cd309367 100644 --- a/drivers/usb/phy/phy.c +++ b/drivers/usb/phy/phy.c @@ -232,6 +232,9 @@ struct usb_phy *usb_get_phy_dev(struct device *dev, u8 index) phy = __usb_find_phy_dev(dev, &phy_bind_list, index); if (IS_ERR(phy) || !try_module_get(phy->dev->driver->owner)) { dev_dbg(dev, "unable to find transceiver\n"); + if (!IS_ERR(phy)) + phy = ERR_PTR(-ENODEV); + goto err0; } diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 216ce307827..824ea5e7ec8 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -146,6 +146,7 @@ static const struct usb_device_id id_table_combined[] = { { USB_DEVICE(FTDI_VID, FTDI_AMC232_PID) }, { USB_DEVICE(FTDI_VID, FTDI_CANUSB_PID) }, { USB_DEVICE(FTDI_VID, FTDI_CANDAPTER_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_BM_ATOM_NANO_PID) }, { USB_DEVICE(FTDI_VID, FTDI_NXTCAM_PID) }, { USB_DEVICE(FTDI_VID, FTDI_EV3CON_PID) }, { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_0_PID) }, @@ -934,6 +935,8 @@ static const struct usb_device_id id_table_combined[] = { { USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_842_2_PID) }, { USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_842_3_PID) }, { USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_842_4_PID) }, + /* ekey Devices */ + { USB_DEVICE(FTDI_VID, FTDI_EKEY_CONV_USB_PID) }, /* Infineon Devices */ { USB_DEVICE_INTERFACE_NUMBER(INFINEON_VID, INFINEON_TRIBOARD_PID, 1) }, { } /* Terminating entry */ diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 1e58d90a0b6..70b0b1d88ae 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -42,6 +42,8 @@ /* www.candapter.com Ewert Energy Systems CANdapter device */ #define FTDI_CANDAPTER_PID 0x9F80 /* Product Id */ +#define FTDI_BM_ATOM_NANO_PID 0xa559 /* Basic Micro ATOM Nano USB2Serial */ + /* * Texas Instruments XDS100v2 JTAG / BeagleBone A3 * http://processors.wiki.ti.com/index.php/XDS100 @@ -1378,3 +1380,8 @@ #define BRAINBOXES_US_160_6_PID 0x9006 /* US-160 16xRS232 1Mbaud Port 11 and 12 */ #define BRAINBOXES_US_160_7_PID 0x9007 /* US-160 16xRS232 1Mbaud Port 13 and 14 */ #define BRAINBOXES_US_160_8_PID 0x9008 /* US-160 16xRS232 1Mbaud Port 15 and 16 */ + +/* + * ekey biometric systems GmbH (http://ekey.net/) + */ +#define FTDI_EKEY_CONV_USB_PID 0xCB08 /* Converter USB */ diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index a9688940543..54a8120897a 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -275,8 +275,12 @@ static void option_instat_callback(struct urb *urb); #define ZTE_PRODUCT_MF622 0x0001 #define ZTE_PRODUCT_MF628 0x0015 #define ZTE_PRODUCT_MF626 0x0031 -#define ZTE_PRODUCT_MC2718 0xffe8 #define ZTE_PRODUCT_AC2726 0xfff1 +#define ZTE_PRODUCT_CDMA_TECH 0xfffe +#define ZTE_PRODUCT_AC8710T 0xffff +#define ZTE_PRODUCT_MC2718 0xffe8 +#define ZTE_PRODUCT_AD3812 0xffeb +#define ZTE_PRODUCT_MC2716 0xffed #define BENQ_VENDOR_ID 0x04a5 #define BENQ_PRODUCT_H10 0x4068 @@ -494,6 +498,10 @@ static void option_instat_callback(struct urb *urb); #define INOVIA_VENDOR_ID 0x20a6 #define INOVIA_SEW858 0x1105 +/* VIA Telecom */ +#define VIATELECOM_VENDOR_ID 0x15eb +#define VIATELECOM_PRODUCT_CDS7 0x0001 + /* some devices interfaces need special handling due to a number of reasons */ enum option_blacklist_reason { OPTION_BLACKLIST_NONE = 0, @@ -527,10 +535,18 @@ static const struct option_blacklist_info zte_k3765_z_blacklist = { .reserved = BIT(4), }; +static const struct option_blacklist_info zte_ad3812_z_blacklist = { + .sendsetup = BIT(0) | BIT(1) | BIT(2), +}; + static const struct option_blacklist_info zte_mc2718_z_blacklist = { .sendsetup = BIT(1) | BIT(2) | BIT(3) | BIT(4), }; +static const struct option_blacklist_info zte_mc2716_z_blacklist = { + .sendsetup = BIT(1) | BIT(2) | BIT(3), +}; + static const struct option_blacklist_info huawei_cdc12_blacklist = { .reserved = BIT(1) | BIT(2), }; @@ -1070,6 +1086,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1012, 0xff) }, { USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC650) }, { USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC680) }, + { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6000)}, /* ZTE AC8700 */ { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */ { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x0023)}, /* ONYX 3G device */ { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x9000)}, /* SIMCom SIM5218 */ @@ -1544,13 +1561,18 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff93, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff94, 0xff, 0xff, 0xff) }, - /* NOTE: most ZTE CDMA devices should be driven by zte_ev, not option */ + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC2726, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710T, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2718, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t)&zte_mc2718_z_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AD3812, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&zte_ad3812_z_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2716, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&zte_mc2716_z_blacklist }, { USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x01) }, { USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x05) }, { USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x86, 0x10) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC2726, 0xff, 0xff, 0xff) }, { USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) }, { USB_DEVICE(DLINK_VENDOR_ID, DLINK_PRODUCT_DWM_652) }, @@ -1724,6 +1746,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e01, 0xff, 0xff, 0xff) }, /* D-Link DWM-152/C1 */ { USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e02, 0xff, 0xff, 0xff) }, /* D-Link DWM-156/C1 */ { USB_DEVICE(INOVIA_VENDOR_ID, INOVIA_SEW858) }, + { USB_DEVICE(VIATELECOM_VENDOR_ID, VIATELECOM_PRODUCT_CDS7) }, { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids); @@ -1916,6 +1939,8 @@ static void option_instat_callback(struct urb *urb) dev_dbg(dev, "%s: type %x req %x\n", __func__, req_pkt->bRequestType, req_pkt->bRequest); } + } else if (status == -ENOENT || status == -ESHUTDOWN) { + dev_dbg(dev, "%s: urb stopped: %d\n", __func__, status); } else dev_err(dev, "%s: error %d\n", __func__, status); diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index b3d5a35c0d4..e9bad928039 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -45,6 +45,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_GPRS) }, { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_HCR331) }, { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_MOTOROLA) }, + { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_ZTEK) }, { USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID) }, { USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID_RSAQ5) }, { USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID) }, diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h index 42bc082896a..71fd9da1d6e 100644 --- a/drivers/usb/serial/pl2303.h +++ b/drivers/usb/serial/pl2303.h @@ -22,6 +22,7 @@ #define PL2303_PRODUCT_ID_GPRS 0x0609 #define PL2303_PRODUCT_ID_HCR331 0x331a #define PL2303_PRODUCT_ID_MOTOROLA 0x0307 +#define PL2303_PRODUCT_ID_ZTEK 0xe1f1 #define ATEN_VENDOR_ID 0x0557 #define ATEN_VENDOR_ID2 0x0547 diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 02de3110fe9..475723c006f 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -764,29 +764,39 @@ static int usb_serial_probe(struct usb_interface *interface, if (usb_endpoint_is_bulk_in(endpoint)) { /* we found a bulk in endpoint */ dev_dbg(ddev, "found bulk in on endpoint %d\n", i); - bulk_in_endpoint[num_bulk_in] = endpoint; - ++num_bulk_in; + if (num_bulk_in < MAX_NUM_PORTS) { + bulk_in_endpoint[num_bulk_in] = endpoint; + ++num_bulk_in; + } } if (usb_endpoint_is_bulk_out(endpoint)) { /* we found a bulk out endpoint */ dev_dbg(ddev, "found bulk out on endpoint %d\n", i); - bulk_out_endpoint[num_bulk_out] = endpoint; - ++num_bulk_out; + if (num_bulk_out < MAX_NUM_PORTS) { + bulk_out_endpoint[num_bulk_out] = endpoint; + ++num_bulk_out; + } } if (usb_endpoint_is_int_in(endpoint)) { /* we found a interrupt in endpoint */ dev_dbg(ddev, "found interrupt in on endpoint %d\n", i); - interrupt_in_endpoint[num_interrupt_in] = endpoint; - ++num_interrupt_in; + if (num_interrupt_in < MAX_NUM_PORTS) { + interrupt_in_endpoint[num_interrupt_in] = + endpoint; + ++num_interrupt_in; + } } if (usb_endpoint_is_int_out(endpoint)) { /* we found an interrupt out endpoint */ dev_dbg(ddev, "found interrupt out on endpoint %d\n", i); - interrupt_out_endpoint[num_interrupt_out] = endpoint; - ++num_interrupt_out; + if (num_interrupt_out < MAX_NUM_PORTS) { + interrupt_out_endpoint[num_interrupt_out] = + endpoint; + ++num_interrupt_out; + } } } @@ -809,8 +819,10 @@ static int usb_serial_probe(struct usb_interface *interface, if (usb_endpoint_is_int_in(endpoint)) { /* we found a interrupt in endpoint */ dev_dbg(ddev, "found interrupt in for Prolific device on separate interface\n"); - interrupt_in_endpoint[num_interrupt_in] = endpoint; - ++num_interrupt_in; + if (num_interrupt_in < MAX_NUM_PORTS) { + interrupt_in_endpoint[num_interrupt_in] = endpoint; + ++num_interrupt_in; + } } } } @@ -850,6 +862,11 @@ static int usb_serial_probe(struct usb_interface *interface, num_ports = type->num_ports; } + if (num_ports > MAX_NUM_PORTS) { + dev_warn(ddev, "too many ports requested: %d\n", num_ports); + num_ports = MAX_NUM_PORTS; + } + serial->num_ports = num_ports; serial->num_bulk_in = num_bulk_in; serial->num_bulk_out = num_bulk_out; diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c index e62f2dff8b7..6c3734d2b45 100644 --- a/drivers/usb/serial/whiteheat.c +++ b/drivers/usb/serial/whiteheat.c @@ -514,6 +514,10 @@ static void command_port_read_callback(struct urb *urb) dev_dbg(&urb->dev->dev, "%s - command_info is NULL, exiting.\n", __func__); return; } + if (!urb->actual_length) { + dev_dbg(&urb->dev->dev, "%s - empty response, exiting.\n", __func__); + return; + } if (status) { dev_dbg(&urb->dev->dev, "%s - nonzero urb status: %d\n", __func__, status); if (status != -ENOENT) @@ -534,7 +538,8 @@ static void command_port_read_callback(struct urb *urb) /* These are unsolicited reports from the firmware, hence no waiting command to wakeup */ dev_dbg(&urb->dev->dev, "%s - event received\n", __func__); - } else if (data[0] == WHITEHEAT_GET_DTR_RTS) { + } else if ((data[0] == WHITEHEAT_GET_DTR_RTS) && + (urb->actual_length - 1 <= sizeof(command_info->result_buffer))) { memcpy(command_info->result_buffer, &data[1], urb->actual_length - 1); command_info->command_finished = WHITEHEAT_CMD_COMPLETE; diff --git a/drivers/usb/serial/zte_ev.c b/drivers/usb/serial/zte_ev.c index e40ab739c4a..1a132e9e947 100644 --- a/drivers/usb/serial/zte_ev.c +++ b/drivers/usb/serial/zte_ev.c @@ -272,28 +272,8 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port) } static const struct usb_device_id id_table[] = { - /* AC8710, AC8710T */ - { USB_DEVICE_AND_INTERFACE_INFO(0x19d2, 0xffff, 0xff, 0xff, 0xff) }, - /* AC8700 */ - { USB_DEVICE_AND_INTERFACE_INFO(0x19d2, 0xfffe, 0xff, 0xff, 0xff) }, /* MG880 */ { USB_DEVICE(0x19d2, 0xfffd) }, - { USB_DEVICE(0x19d2, 0xfffc) }, - { USB_DEVICE(0x19d2, 0xfffb) }, - /* AC8710_V3 */ - { USB_DEVICE(0x19d2, 0xfff6) }, - { USB_DEVICE(0x19d2, 0xfff7) }, - { USB_DEVICE(0x19d2, 0xfff8) }, - { USB_DEVICE(0x19d2, 0xfff9) }, - { USB_DEVICE(0x19d2, 0xffee) }, - /* AC2716, MC2716 */ - { USB_DEVICE_AND_INTERFACE_INFO(0x19d2, 0xffed, 0xff, 0xff, 0xff) }, - /* AD3812 */ - { USB_DEVICE_AND_INTERFACE_INFO(0x19d2, 0xffeb, 0xff, 0xff, 0xff) }, - { USB_DEVICE(0x19d2, 0xffec) }, - { USB_DEVICE(0x05C6, 0x3197) }, - { USB_DEVICE(0x05C6, 0x6000) }, - { USB_DEVICE(0x05C6, 0x9008) }, { }, }; MODULE_DEVICE_TABLE(usb, id_table); diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 80a5b366255..7ef99b2f3aa 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -922,6 +922,12 @@ UNUSUAL_DEV( 0x069b, 0x3004, 0x0001, 0x0001, USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_FIX_CAPACITY ), +UNUSUAL_DEV( 0x06ca, 0x2003, 0x0100, 0x0100, + "Newer Technology", + "uSCSI", + USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init, + US_FL_SCM_MULT_TARG ), + /* Reported by Adrian Pilchowiec <adi1981@epf.pl> */ UNUSUAL_DEV( 0x071b, 0x3203, 0x0000, 0x0000, "RockChip", diff --git a/drivers/staging/usbip/Kconfig b/drivers/usb/usbip/Kconfig index bd99e9e47e5..bd99e9e47e5 100644 --- a/drivers/staging/usbip/Kconfig +++ b/drivers/usb/usbip/Kconfig diff --git a/drivers/staging/usbip/Makefile b/drivers/usb/usbip/Makefile index 9ecd61545be..9ecd61545be 100644 --- a/drivers/staging/usbip/Makefile +++ b/drivers/usb/usbip/Makefile diff --git a/drivers/staging/usbip/README b/drivers/usb/usbip/README index 41a2cf2e77a..41a2cf2e77a 100644 --- a/drivers/staging/usbip/README +++ b/drivers/usb/usbip/README diff --git a/drivers/staging/usbip/stub.h b/drivers/usb/usbip/stub.h index 266e2b0ce9a..266e2b0ce9a 100644 --- a/drivers/staging/usbip/stub.h +++ b/drivers/usb/usbip/stub.h diff --git a/drivers/staging/usbip/stub_dev.c b/drivers/usb/usbip/stub_dev.c index 51d0c718873..fac20e0434c 100644 --- a/drivers/staging/usbip/stub_dev.c +++ b/drivers/usb/usbip/stub_dev.c @@ -26,33 +26,6 @@ #include "stub.h" /* - * Define device IDs here if you want to explicitly limit exportable devices. - * In most cases, wildcard matching will be okay because driver binding can be - * changed dynamically by a userland program. - */ -static struct usb_device_id stub_table[] = { -#if 0 - /* just an example */ - { USB_DEVICE(0x05ac, 0x0301) }, /* Mac 1 button mouse */ - { USB_DEVICE(0x0430, 0x0009) }, /* Plat Home Keyboard */ - { USB_DEVICE(0x059b, 0x0001) }, /* Iomega USB Zip 100 */ - { USB_DEVICE(0x04b3, 0x4427) }, /* IBM USB CD-ROM */ - { USB_DEVICE(0x05a9, 0xa511) }, /* LifeView USB cam */ - { USB_DEVICE(0x55aa, 0x0201) }, /* Imation card reader */ - { USB_DEVICE(0x046d, 0x0870) }, /* Qcam Express(QV-30) */ - { USB_DEVICE(0x04bb, 0x0101) }, /* IO-DATA HD 120GB */ - { USB_DEVICE(0x04bb, 0x0904) }, /* IO-DATA USB-ET/TX */ - { USB_DEVICE(0x04bb, 0x0201) }, /* IO-DATA USB-ET/TX */ - { USB_DEVICE(0x08bb, 0x2702) }, /* ONKYO USB Speaker */ - { USB_DEVICE(0x046d, 0x08b2) }, /* Logicool Qcam 4000 Pro */ -#endif - /* magic for wild card */ - { .driver_info = 1 }, - { 0, } /* Terminating entry */ -}; -MODULE_DEVICE_TABLE(usb, stub_table); - -/* * usbip_status shows the status of usbip-host as long as this driver is bound * to the target device. */ diff --git a/drivers/staging/usbip/stub_main.c b/drivers/usb/usbip/stub_main.c index 44ab43fc4fc..44ab43fc4fc 100644 --- a/drivers/staging/usbip/stub_main.c +++ b/drivers/usb/usbip/stub_main.c diff --git a/drivers/staging/usbip/stub_rx.c b/drivers/usb/usbip/stub_rx.c index 00e475c51a1..00e475c51a1 100644 --- a/drivers/staging/usbip/stub_rx.c +++ b/drivers/usb/usbip/stub_rx.c diff --git a/drivers/staging/usbip/stub_tx.c b/drivers/usb/usbip/stub_tx.c index dbcabc9dbe0..dbcabc9dbe0 100644 --- a/drivers/staging/usbip/stub_tx.c +++ b/drivers/usb/usbip/stub_tx.c diff --git a/drivers/staging/usbip/usbip_common.c b/drivers/usb/usbip/usbip_common.c index facaaf003f1..facaaf003f1 100644 --- a/drivers/staging/usbip/usbip_common.c +++ b/drivers/usb/usbip/usbip_common.c diff --git a/drivers/staging/usbip/usbip_common.h b/drivers/usb/usbip/usbip_common.h index 4da3866a037..86b08475c25 100644 --- a/drivers/staging/usbip/usbip_common.h +++ b/drivers/usb/usbip/usbip_common.h @@ -29,7 +29,7 @@ #include <linux/types.h> #include <linux/usb.h> #include <linux/wait.h> -#include "uapi/usbip.h" +#include <uapi/linux/usbip.h> #define USBIP_VERSION "1.0.0" diff --git a/drivers/staging/usbip/usbip_event.c b/drivers/usb/usbip/usbip_event.c index 64933b993d7..64933b993d7 100644 --- a/drivers/staging/usbip/usbip_event.c +++ b/drivers/usb/usbip/usbip_event.c diff --git a/drivers/staging/usbip/usbip_protocol.txt b/drivers/usb/usbip/usbip_protocol.txt index 16b6fe27284..16b6fe27284 100644 --- a/drivers/staging/usbip/usbip_protocol.txt +++ b/drivers/usb/usbip/usbip_protocol.txt diff --git a/drivers/staging/usbip/vhci.h b/drivers/usb/usbip/vhci.h index a863a98a91c..a863a98a91c 100644 --- a/drivers/staging/usbip/vhci.h +++ b/drivers/usb/usbip/vhci.h diff --git a/drivers/staging/usbip/vhci_hcd.c b/drivers/usb/usbip/vhci_hcd.c index c02374b6049..c02374b6049 100644 --- a/drivers/staging/usbip/vhci_hcd.c +++ b/drivers/usb/usbip/vhci_hcd.c diff --git a/drivers/staging/usbip/vhci_rx.c b/drivers/usb/usbip/vhci_rx.c index 00e4a54308e..00e4a54308e 100644 --- a/drivers/staging/usbip/vhci_rx.c +++ b/drivers/usb/usbip/vhci_rx.c diff --git a/drivers/staging/usbip/vhci_sysfs.c b/drivers/usb/usbip/vhci_sysfs.c index 211f43f67ea..211f43f67ea 100644 --- a/drivers/staging/usbip/vhci_sysfs.c +++ b/drivers/usb/usbip/vhci_sysfs.c diff --git a/drivers/staging/usbip/vhci_tx.c b/drivers/usb/usbip/vhci_tx.c index 409fd99f325..409fd99f325 100644 --- a/drivers/staging/usbip/vhci_tx.c +++ b/drivers/usb/usbip/vhci_tx.c diff --git a/drivers/usb/wusbcore/wa-xfer.c b/drivers/usb/wusbcore/wa-xfer.c index 3e2e4ed2015..e279015be46 100644 --- a/drivers/usb/wusbcore/wa-xfer.c +++ b/drivers/usb/wusbcore/wa-xfer.c @@ -2602,6 +2602,7 @@ static void wa_buf_in_cb(struct urb *urb) dev = &wa->usb_iface->dev; --(wa->active_buf_in_urbs); active_buf_in_urbs = wa->active_buf_in_urbs; + rpipe = xfer->ep->hcpriv; if (usb_pipeisoc(xfer->urb->pipe)) { struct usb_iso_packet_descriptor *iso_frame_desc = @@ -2659,7 +2660,6 @@ static void wa_buf_in_cb(struct urb *urb) resubmit_dti = (isoc_data_frame_count == urb_frame_count); } else if (active_buf_in_urbs == 0) { - rpipe = xfer->ep->hcpriv; dev_dbg(dev, "xfer %p 0x%08X#%u: data in done (%zu bytes)\n", xfer, wa_xfer_id(xfer), seg->index, @@ -2685,7 +2685,6 @@ static void wa_buf_in_cb(struct urb *urb) */ resubmit_dti = wa->dti_state != WA_DTI_TRANSFER_RESULT_PENDING; spin_lock_irqsave(&xfer->lock, flags); - rpipe = xfer->ep->hcpriv; if (printk_ratelimit()) dev_err(dev, "xfer %p 0x%08X#%u: data in error %d\n", xfer, wa_xfer_id(xfer), seg->index, diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c index d7a3d13e72e..b85983e97f0 100644 --- a/drivers/video/backlight/pwm_bl.c +++ b/drivers/video/backlight/pwm_bl.c @@ -173,6 +173,7 @@ static int pwm_backlight_parse_dt(struct device *dev, data->max_brightness--; } + data->enable_gpio = -EINVAL; return 0; } diff --git a/drivers/video/fbdev/amba-clcd.c b/drivers/video/fbdev/amba-clcd.c index beadd3edaa1..a7b6217ac87 100644 --- a/drivers/video/fbdev/amba-clcd.c +++ b/drivers/video/fbdev/amba-clcd.c @@ -24,6 +24,7 @@ #include <linux/list.h> #include <linux/amba/bus.h> #include <linux/amba/clcd.h> +#include <linux/bitops.h> #include <linux/clk.h> #include <linux/hardirq.h> #include <linux/dma-mapping.h> @@ -650,6 +651,7 @@ static int clcdfb_of_init_display(struct clcd_fb *fb) { struct device_node *endpoint; int err; + unsigned int bpp; u32 max_bandwidth; u32 tft_r0b0g0[3]; @@ -667,11 +669,22 @@ static int clcdfb_of_init_display(struct clcd_fb *fb) err = of_property_read_u32(fb->dev->dev.of_node, "max-memory-bandwidth", &max_bandwidth); - if (!err) - fb->panel->bpp = 8 * max_bandwidth / (fb->panel->mode.xres * - fb->panel->mode.yres * fb->panel->mode.refresh); - else - fb->panel->bpp = 32; + if (!err) { + /* + * max_bandwidth is in bytes per second and pixclock in + * pico-seconds, so the maximum allowed bits per pixel is + * 8 * max_bandwidth / (PICOS2KHZ(pixclock) * 1000) + * Rearrange this calculation to avoid overflow and then ensure + * result is a valid format. + */ + bpp = max_bandwidth / (1000 / 8) + / PICOS2KHZ(fb->panel->mode.pixclock); + bpp = rounddown_pow_of_two(bpp); + if (bpp > 32) + bpp = 32; + } else + bpp = 32; + fb->panel->bpp = bpp; #ifdef CONFIG_CPU_BIG_ENDIAN fb->panel->cntl |= CNTL_BEBO; diff --git a/drivers/video/fbdev/atmel_lcdfb.c b/drivers/video/fbdev/atmel_lcdfb.c index 92640d46770..1d8bdb92939 100644 --- a/drivers/video/fbdev/atmel_lcdfb.c +++ b/drivers/video/fbdev/atmel_lcdfb.c @@ -1102,12 +1102,14 @@ static int atmel_lcdfb_of_init(struct atmel_lcdfb_info *sinfo) timings = of_get_display_timings(display_np); if (!timings) { dev_err(dev, "failed to get display timings\n"); + ret = -EINVAL; goto put_display_node; } timings_np = of_find_node_by_name(display_np, "display-timings"); if (!timings_np) { dev_err(dev, "failed to find display-timings node\n"); + ret = -ENODEV; goto put_display_node; } diff --git a/drivers/video/fbdev/chipsfb.c b/drivers/video/fbdev/chipsfb.c index 206a66b6107..59abdc6a97f 100644 --- a/drivers/video/fbdev/chipsfb.c +++ b/drivers/video/fbdev/chipsfb.c @@ -273,7 +273,7 @@ static struct chips_init_reg chips_init_xr[] = { { 0xa8, 0x00 } }; -static void __init chips_hw_init(void) +static void chips_hw_init(void) { int i; diff --git a/drivers/video/fbdev/da8xx-fb.c b/drivers/video/fbdev/da8xx-fb.c index 788f6b37fce..10c876c9577 100644 --- a/drivers/video/fbdev/da8xx-fb.c +++ b/drivers/video/fbdev/da8xx-fb.c @@ -419,7 +419,7 @@ static void lcd_cfg_horizontal_sync(int back_porch, int pulse_width, { u32 reg; - reg = lcdc_read(LCD_RASTER_TIMING_0_REG) & 0xf; + reg = lcdc_read(LCD_RASTER_TIMING_0_REG) & 0x3ff; reg |= (((back_porch-1) & 0xff) << 24) | (((front_porch-1) & 0xff) << 16) | (((pulse_width-1) & 0x3f) << 10); diff --git a/drivers/video/of_display_timing.c b/drivers/video/of_display_timing.c index 987edf11003..5c098d5b404 100644 --- a/drivers/video/of_display_timing.c +++ b/drivers/video/of_display_timing.c @@ -236,6 +236,7 @@ timingfail: if (native_mode) of_node_put(native_mode); display_timings_release(disp); + disp = NULL; entryfail: kfree(disp); dispfail: |