summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/ata/ata_piix.c36
1 files changed, 36 insertions, 0 deletions
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index 22752e46b34..0ff96a06374 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -1173,6 +1173,39 @@ static void __devinit piix_init_sata_map(struct pci_dev *pdev,
hpriv->map = map;
}
+static void piix_iocfg_bit18_quirk(struct pci_dev *pdev)
+{
+ static struct dmi_system_id sysids[] = {
+ {
+ /* Clevo M570U sets IOCFG bit 18 if the cdrom
+ * isn't used to boot the system which
+ * disables the channel.
+ */
+ .ident = "M570U",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Clevo Co."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "M570U"),
+ },
+ },
+ };
+ u32 iocfg;
+
+ if (!dmi_check_system(sysids))
+ return;
+
+ /* The datasheet says that bit 18 is NOOP but certain systems
+ * seem to use it to disable a channel. Clear the bit on the
+ * affected systems.
+ */
+ pci_read_config_dword(pdev, PIIX_IOCFG, &iocfg);
+ if (iocfg & (1 << 18)) {
+ dev_printk(KERN_INFO, &pdev->dev,
+ "applying IOCFG bit18 quirk\n");
+ iocfg &= ~(1 << 18);
+ pci_write_config_dword(pdev, PIIX_IOCFG, iocfg);
+ }
+}
+
/**
* piix_init_one - Register PIIX ATA PCI device with kernel services
* @pdev: PCI device to register
@@ -1234,6 +1267,9 @@ static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
piix_map_db_table[ent->driver_data]);
}
+ /* apply IOCFG bit18 quirk */
+ piix_iocfg_bit18_quirk(pdev);
+
/* On ICH5, some BIOSen disable the interrupt using the
* PCI_COMMAND_INTX_DISABLE bit added in PCI 2.3.
* On ICH6, this bit has the same effect, but only when