diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/i2c/i2c-core.c | 28 |
1 files changed, 25 insertions, 3 deletions
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 96f01331544..af5172486fa 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -387,6 +387,27 @@ static int i2c_check_client_addr_validity(const struct i2c_client *client) return 0; } +/* And this is a strict address validity check, used when probing. If a + * device uses a reserved address, then it shouldn't be probed. 7-bit + * addressing is assumed, 10-bit address devices are rare and should be + * explicitly enumerated. */ +static int i2c_check_addr_validity(unsigned short addr) +{ + /* + * Reserved addresses per I2C specification: + * 0x00 General call address / START byte + * 0x01 CBUS address + * 0x02 Reserved for different bus format + * 0x03 Reserved for future purposes + * 0x04-0x07 Hs-mode master code + * 0x78-0x7b 10-bit slave addressing + * 0x7c-0x7f Reserved for future purposes + */ + if (addr < 0x08 || addr > 0x77) + return -EINVAL; + return 0; +} + /** * i2c_new_device - instantiate an i2c device * @adap: the adapter managing the device @@ -1340,10 +1361,11 @@ static int i2c_detect_address(struct i2c_client *temp_client, int err; /* Make sure the address is valid */ - if (addr < 0x03 || addr > 0x77) { + err = i2c_check_addr_validity(addr); + if (err) { dev_warn(&adapter->dev, "Invalid probe address 0x%02x\n", addr); - return -EINVAL; + return err; } /* Skip if already in use */ @@ -1446,7 +1468,7 @@ i2c_new_probed_device(struct i2c_adapter *adap, for (i = 0; addr_list[i] != I2C_CLIENT_END; i++) { /* Check address validity */ - if (addr_list[i] < 0x03 || addr_list[i] > 0x77) { + if (i2c_check_addr_validity(addr_list[i]) < 0) { dev_warn(&adap->dev, "Invalid 7-bit address " "0x%02x\n", addr_list[i]); continue; |